Science.gov

Sample records for alkyl c-h groups

  1. A General Strategy for the Nickel-Catalyzed C-H Alkylation of Anilines.

    PubMed

    Ruan, Zhixiong; Lackner, Sebastian; Ackermann, Lutz

    2016-02-24

    The C-H alkylation of aniline derivatives with both primary and secondary alkyl halides was achieved with a versatile nickel catalyst of a vicinal diamine ligand. Step-economic access to functionalized 2-pyrimidyl anilines, key structural motifs in anticancer drugs, is thus provided. The C-H functionalization proceeded through facile C-H activation and SET-type C-X bond cleavage with the assistance of a monodentate directing group, which could be removed in a traceless fashion.

  2. Iridium-Catalyzed, Hydrosilyl-Directed Borylation of Unactivated Alkyl C-H Bonds.

    PubMed

    Larsen, Matthew A; Cho, Seung Hwan; Hartwig, John

    2016-01-27

    We report the iridium-catalyzed borylation of primary and secondary alkyl C-H bonds directed by a Si-H group to form alkylboronate esters site selectively. The reactions occur with high selectivity at primary C-H bonds γ to the hydrosilyl group to form primary alkyl bisboronate esters. In the absence of such primary C-H bonds, the borylation occurs selectively at a secondary C-H bond γ to the hydrosilyl group, and these reactions of secondary C-H bonds occur with high diastereoselectivity. The hydrosilyl-containing alkyl boronate esters formed by this method undergo transformations selectively at the carbon-boron or carbon-silicon bonds of these products under distinct conditions to give the products of amination, oxidation, and arylation.

  3. Asymmetric Intramolecular Alkylation of Chiral Aromatic Imines via Catalytic C-H Bond Activation

    SciTech Connect

    Watzke, Anja; Wilson, Rebecca; O'Malley, Steven; Bergman, Robert; Ellman, Jonathan

    2007-04-16

    The asymmetric intramolecular alkylation of chiral aromatic aldimines, in which differentially substituted alkenes are tethered meta to the imine, was investigated. High enantioselectivities were obtained for imines prepared from aminoindane derivatives, which function as directing groups for the rhodium-catalyzed C-H bond activation. Initial demonstration of catalytic asymmetric intramolecular alkylation also was achieved by employing a sterically hindered achiral imine substrate and catalytic amounts of a chiral amine.

  4. Intermolecular C-H Quaternary Alkylation of Aniline Derivatives Induced by Visible-Light Photoredox Catalysis.

    PubMed

    Cheng, Jie; Deng, Xia; Wang, Guoqiang; Li, Ying; Cheng, Xu; Li, Guigen

    2016-09-16

    The intermolecular direct C-H alkylation of aniline derivatives with α-bromo ketones to build a quaternary carbon center was reported with a visible-light catalysis procedure. The reaction covers a variety of functional groups with good to excellent yields. A regioselectivity favoring the ortho position for the amine group was observed and investigated with Fukui indices and spectral methods.

  5. Intermolecular C-H Quaternary Alkylation of Aniline Derivatives Induced by Visible-Light Photoredox Catalysis.

    PubMed

    Cheng, Jie; Deng, Xia; Wang, Guoqiang; Li, Ying; Cheng, Xu; Li, Guigen

    2016-09-16

    The intermolecular direct C-H alkylation of aniline derivatives with α-bromo ketones to build a quaternary carbon center was reported with a visible-light catalysis procedure. The reaction covers a variety of functional groups with good to excellent yields. A regioselectivity favoring the ortho position for the amine group was observed and investigated with Fukui indices and spectral methods. PMID:27571116

  6. Alcohols as alkylating agents in heteroarene C-H functionalization

    NASA Astrophysics Data System (ADS)

    Jin, Jian; MacMillan, David W. C.

    2015-09-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage. One of the core principles underlying DNA biosynthesis is the radical-mediated elimination of H2O to deoxygenate ribonucleotides, an example of `spin-centre shift', during which an alcohol C-O bond is cleaved, resulting in a carbon-centred radical intermediate. Although spin-centre shift is a well-understood biochemical process, it is underused by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylation reactions using alcohols as radical precursors. Because conventional radical-based alkylation methods require the use of stoichiometric oxidants, increased temperatures or peroxides, a mild protocol using simple and abundant alkylating agents would have considerable use in the synthesis of diversely functionalized pharmacophores. Here we describe the development of a dual catalytic alkylation of heteroarenes, using alcohols as mild alkylating reagents. This method represents the first, to our knowledge, broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer catalysis. The value of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone.

  7. Facile C-H alkylation in water: enabling defect-free materials for optoelectronic devices.

    PubMed

    Saikia, Gunin; Iyer, Parameswar K

    2010-04-16

    A facile method for the alkylation of fluorene achieved via direct C-H alkylation under aqueous conditions is reported, wherein the formation of fluorenone is inhibited, resulting in the exclusive formation of the desired dialkyl-substituted fluorene monomer. As a proof of concept, this method has also been successfully extended to perform N-alkylation of carbazole, diphenylamine, and N,N-dialkylation of aniline in high yields.

  8. Manganese-Mediated C-H Alkylation of Unbiased Arenes Using Alkylboronic Acids.

    PubMed

    Castro, Susana; Fernández, Juan J; Fañanás, Francisco J; Vicente, Rubén; Rodríguez, Félix

    2016-06-27

    The alkylation of arenes is an essential synthetic step of interest not only from the academic point of view but also in the bulk chemical industry. Despite its limitations, the Friedel-Crafts reaction is still the method of choice for most of the arene alkylation processes. Thus, the development of new strategies to synthesize alkyl arenes is a highly desirable goal, and herein, we present an alternative method to those conventional reactions. Particularly, a simple protocol for the direct C-H alkylation of unbiased arenes with alkylboronic acids in the presence of Mn(OAc)3 ⋅2H2 O is reported. Primary or secondary unactivated alkylboronic acids served as alkylating agents for the direct functionalization of representative polyaromatic hydrocarbons (PAHs) or benzene. The results are consistent with a free-radical mechanism. PMID:27124250

  9. Synthesis of new class of alkyl azarene pyridinium zwitterions via iodine mediated sp3 C-H bond activation.

    PubMed

    Kumar, Atul; Gupta, Garima; Srivastava, Suman

    2011-12-16

    An efficient and conceptually different approach toward C-H bond activation by using iodine mediated sp(3) C-H functionalization for the synthesis of alkyl azaarene pyridinium zwitterions is described. This work has the interesting distinction of being the first synthesis of a new class of alkyl azaarene pyridinium zwitterion via transition-metal-free sp(3) C-H bond activation of an alkyl azaarene.

  10. Direct C-H alkylation and indole formation of anilines with diazo compounds under rhodium catalysis.

    PubMed

    Mishra, Neeraj Kumar; Choi, Miji; Jo, Hyeim; Oh, Yongguk; Sharma, Satyasheel; Han, Sang Hoon; Jeong, Taejoo; Han, Sangil; Lee, Seok-Yong; Kim, In Su

    2015-12-18

    The rhodium(III)-catalyzed direct functionalization of aniline C-H bonds with α-diazo compounds is described. These transformations provide a facile construction of ortho-alkylated anilines with diazo malonates or highly substituted indoles with diazo acetoacetates.

  11. Chemically Non-Innocent Cyclic (Alkyl)(Amino)Carbenes: Ligand Rearrangement, C-H and C-F Bond Activation.

    PubMed

    Turner, Zoë R

    2016-08-01

    A cyclic (alkyl)(amino)carbene (CAAC) was found to undergo unprecedented rearrangements and transformations of its core structure in the presence of Group 1 and 2 metals. Although the carbene was also found to be prone to intramolecular C-H activation, it was competent for intermolecular activation of a variety of sp-, sp(2) -, and sp(3) -hybridized C-H bonds. Double C-F activation of hexafluorobenzene was also observed in this work. These processes all hold relevance to the role of these carbenes in catalysis, as well as to their use in the synthesis of new and unusual main group or transition metal complexes. PMID:27363588

  12. Polyimides with pendant alkyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Young, P. R.

    1982-01-01

    The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

  13. Asymmetric Synthesis of (-)-Incarvillateine Employing an Intramolecular Alkylation via Rh-Catalyzed Olefinic C-H Bond Activation

    SciTech Connect

    Tsai, Andy; Bergman, Robert; Ellman, Jonathan

    2008-02-18

    An asymmetric total synthesis of (-)-incarvillateine, a natural product having potent analgesic properties, has been achieved in 11 steps and 15.4% overall yield. The key step is a rhodium-catalyzed intramolecular alkylation of an olefinic C-H bond to set two stereocenters. Additionally, this transformation produces an exocyclic, tetrasubstituted alkene through which the bicyclic piperidine moiety can readily be accessed.

  14. Ruthenium-porphyrin-catalyzed diastereoselective intramolecular alkyl carbene insertion into C-H bonds of alkyl diazomethanes generated in situ from N-tosylhydrazones.

    PubMed

    Reddy, Annapureddy Rajasekar; Zhou, Cong-Ying; Guo, Zhen; Wei, Jinhu; Che, Chi-Ming

    2014-12-15

    With a ruthenium-porphyrin catalyst, alkyl diazomethanes generated in situ from N-tosylhydrazones efficiently underwent intramolecular C(sp(3))-H insertion of an alkyl carbene to give substituted tetrahydrofurans and pyrrolidines in up to 99% yield and with up to 99:1 cis selectivity. The reaction displays good tolerance of many functionalities, and the procedure is simple without the need for slow addition with a syringe pump. From a synthetic point of view, the C-H insertion of N-tosylhydrazones can be viewed as reductive coupling between a C=O bond and a C-H bond to form a new C-C bond, since N-tosylhydrazones can be readily prepared from carbonyl compounds. This reaction was successfully applied in a concise synthesis of (±)-pseudoheliotridane.

  15. N-Acyl Amino Acid Ligands for Ruthenium(II)-Catalyzed meta-C-H tert-Alkylation with Removable Auxiliaries.

    PubMed

    Li, Jie; Warratz, Svenja; Zell, Daniel; De Sarkar, Suman; Ishikawa, Eloisa Eriko; Ackermann, Lutz

    2015-11-01

    Acylated amino acid ligands enabled ruthenium(II)-catalyzed C-H functionalizations with excellent levels of meta-selectivity. The outstanding catalytic activity of the ruthenium(II) complexes derived from monoprotected amino acids (MPAA) set the stage for the first ruthenium-catalyzed meta-functionalizations with removable directing groups. Thereby, meta-alkylated anilines could be accessed, which are difficult to prepare by other means of direct aniline functionalizations. The robust nature of the versatile ruthenium(II)-MPAA was reflected by challenging remote C-H transformations with tertiary alkyl halides on aniline derivatives as well as on pyridyl-, pyrimidyl-, and pyrazolyl-substituted arenes. Detailed mechanistic studies provided strong support for an initial reversible C-H ruthenation, followed by a SET-type C-Hal activation through homolytic bond cleavage. Kinetic analyses confirmed this hypothesis through an unusual second-order dependence of the reaction rate on the ruthenium catalyst concentration. Overall, this report highlights the exceptional catalytic activity of ruthenium complexes derived from acylated amino acids, which should prove instrumental for C-H activation chemistry beyond remote functionalization.

  16. Rh-catalyzed sulfonic acid group directed ortho C-H olefination of arenes.

    PubMed

    Dong, Yi; Liu, Gang

    2013-09-21

    A Rh-catalyzed ortho C-H olefination of arenes directed by a sulfonic acid group was developed with good yields and a broad reaction scope. Efficient performance of the catalyst caused this electron-poor aromatic C-H to be activated effectively and unactivated alkenes are also suitable for this reaction.

  17. O-H hydrogen bonding promotes H-atom transfer from α C-H bonds for C-alkylation of alcohols.

    PubMed

    Jeffrey, Jenna L; Terrett, Jack A; MacMillan, David W C

    2015-09-25

    The efficiency and selectivity of hydrogen atom transfer from organic molecules are often difficult to control in the presence of multiple potential hydrogen atom donors and acceptors. Here, we describe the mechanistic evaluation of a mode of catalytic activation that accomplishes the highly selective photoredox α-alkylation/lactonization of alcohols with methyl acrylate via a hydrogen atom transfer mechanism. Our studies indicate a particular role of tetra-n-butylammonium phosphate in enhancing the selectivity for α C-H bonds in alcohols in the presence of allylic, benzylic, α-C=O, and α-ether C-H bonds.

  18. A Simple and Versatile Amide Directing Group for C-H Functionalizations.

    PubMed

    Zhu, Ru-Yi; Farmer, Marcus E; Chen, Yan-Qiao; Yu, Jin-Quan

    2016-08-26

    Achieving selective C-H activation at a single and strategic site in the presence of multiple C-H bonds can provide a powerful and generally useful retrosynthetic disconnection. In this context, a directing group serves as a compass to guide the transition metal to C-H bonds by using distance and geometry as powerful recognition parameters to distinguish between proximal and distal C-H bonds. However, the installation and removal of directing groups is a practical drawback. To improve the utility of this approach, one can seek solutions in three directions: 1) Simplifying the directing group, 2) using common functional groups or protecting groups as directing groups, and 3) attaching the directing group to substrates via a transient covalent bond to render the directing group catalytic. This Review describes the rational development of an extremely simple and yet broadly applicable directing group for Pd(II) , Rh(III) , and Ru(II) catalysts, namely the N-methoxy amide (CONHOMe) moiety. Through collective efforts in the community, a wide range of C-H activation transformations using this type of simple directing group have been developed. PMID:27479708

  19. Scope and Limitations of Auxiliary-Assisted, Palladium-Catalyzed Arylation and Alkylation of sp2 and sp3 C-H Bonds

    PubMed Central

    Nadres, Enrico T.; Santos, Gerson Ivan Franco; Shabashov, Dmitry; Daugulis, Olafs

    2013-01-01

    The scope of palladium-catalyzed, auxiliary-assisted direct arylation and alkylation of sp2 and sp3 C-H bonds of amine and carboxylic acid derivatives has been investigated. The method employs a palladium acetate catalyst, substrate, aryl, alkyl, benzyl, or allyl halide, and inorganic base in t-amyl alcohol or water solvent at 100-140 °C. Aryl and alkyl iodides as well as benzyl and allyl bromides are competent reagents in this transformation. Picolinic acid auxiliary is used for amine γ-functionalization and 8-aminoquinoline auxiliary is used for carboxylic acid β-functionalization. Some optimization of base, additives, and solvent is required for achieving best results. PMID:24090404

  20. Advances in the development of catalytic tethering directing groups for C-H functionalization reactions.

    PubMed

    Sun, Huan; Guimond, Nicolas; Huang, Yong

    2016-09-28

    Transition metal-catalyzed C-H bond insertion is one of the most straightforward strategies to introduce functionalities within a hydrocarbon microenvironment. For the past two decades, selective activation and functionalization of certain inert C-H bonds have been made possible with the help of directing groups (DGs). Despite the enormous advances in the field, an overwhelming majority of systems require two extra steps from their simple precursors: installation and removal of the DGs. Recently, traceless and multitasking groups were invented as a partial solution to DG release. However, installation remains largely unsolved. Ideally, a transient, catalytic DG would circumvent this problem and increase the step- and atom-economy of C-H functionalization processes. In this review, we summarize the recent development of the transient tethering strategy for C-H activation reactions. PMID:27506568

  1. C-H Coupling Reactions Directed by Sulfoxides: Teaching an Old Functional Group New Tricks.

    PubMed

    Pulis, Alexander P; Procter, David J

    2016-08-16

    Sulfoxides are classical functional groups for directing the stoichiometric metalation and functionalization of C-H bonds. In recent times, sulfoxides have been given a new lease on life owing to the development of modern synthetic methods that have arisen because of their unique reactivity. They have recently been used in catalytic C-H activation proceeding via coordination of an internal sulfoxide to a metal or through the action of an external sulfoxide ligand. Furthermore, sulfoxides are able to capture nucleophiles and electrophiles to give sulfonium salts, which subsequently enable the formation of C-C bonds at the expense of C-H bonds. This Review summarizes a renaissance period in the application of sulfoxides arising from their versatility in directing C-H functionalization. PMID:27409984

  2. Polyimide characterization studies - Effect of pendant alkyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Young, P. R.

    1984-01-01

    The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

  3. Ruthenium-catalyzed alkylation of indoles with tertiary amines by oxidation of a sp3 C-H bond and Lewis acid catalysis.

    PubMed

    Wang, Ming-Zhong; Zhou, Cong-Ying; Wong, Man-Kin; Che, Chi-Ming

    2010-05-17

    Ruthenium porphyrins (particularly [Ru(2,6-Cl(2)tpp)CO]; tpp=tetraphenylporphinato) and RuCl(3) can act as oxidation and/or Lewis acid catalysts for direct C-3 alkylation of indoles, giving the desired products in high yields (up to 82% based on 60-95% substrate conversions). These ruthenium compounds catalyze oxidative coupling reactions of a wide variety of anilines and indoles bearing electron-withdrawing or electron-donating substituents with high regioselectivity when using tBuOOH as an oxidant, resulting in the alkylation of N-arylindoles to 3-{[(N-aryl-N-alkyl)amino]methyl}indoles (yield: up to 82%, conversion: up to 95%) and the alkylation of N-alkyl or N-H indoles to 3-[p-(dialkylamino)benzyl]indoles (yield: up to 73%, conversion: up to 92%). A tentative reaction mechanism involving two pathways is proposed: an iminium ion intermediate may be generated by oxidation of an sp(3) C-H bond of the alkylated aniline by an oxoruthenium species; this iminium ion could then either be trapped by an N-arylindole (pathway A) or converted to formaldehyde, allowing a subsequent three-component coupling reaction of the in situ generated formaldehyde with an N-alkylindole and an aniline in the presence of a Lewis acid catalyst (pathway B). The results of deuterium-labeling experiments are consistent with the alkylation of N-alkylindoles via pathway B. The relative reaction rates of [Ru(2,6-Cl(2)tpp)CO]-catalyzed oxidative coupling reactions of 4-X-substituted N,N-dimethylanilines with N-phenylindole (using tBuOOH as oxidant), determined through competition experiments, correlate linearly with the substituent constants sigma (R(2)=0.989), giving a rho value of -1.09. This rho value and the magnitudes of the intra- and intermolecular deuterium isotope effects (k(H)/k(D)) suggest that electron transfer most likely occurs during the initial stage of the oxidation of 4-X-substituted N,N-dimethylanilines. Ruthenium-catalyzed three-component reaction of N-alkyl/N-H indoles

  4. Mechanistic Insight into Ketone α-Alkylation with Unactivated Olefins via C-H Activation Promoted by Metal-Organic Cooperative Catalysis (MOCC): Enriching the MOCC Chemistry.

    PubMed

    Dang, Yanfeng; Qu, Shuanglin; Tao, Yuan; Deng, Xi; Wang, Zhi-Xiang

    2015-05-20

    Metal-organic cooperative catalysis (MOCC) has been successfully applied for hydroacylation of olefins with aldehydes via directed C(sp(2))-H functionalization. Most recently, it was reported that an elaborated MOCC system, containing Rh(I) catalyst and 7-azaindoline (L1) cocatalyst, could even catalyze ketone α-alkylation with unactivated olefins via C(sp(3))-H activation. Herein we present a density functional theory study to understand the mechanism of the challenging ketone α-alkylation. The transformation uses IMesRh(I)Cl(L1)(CH2═CH2) as an active catalyst and proceeds via sequential seven steps, including ketone condensation with L1, giving enamine 1b; 1b coordination to Rh(I) active catalyst, generating Rh(I)-1b intermediate; C(sp(2))-H oxidative addition, leading to a Rh(III)-H hydride; olefin migratory insertion into Rh(III)-H bond; reductive elimination, generating Rh(I)-1c(alkylated 1b) intermediate; decoordination of 1c, liberating 1c and regenerating Rh(I) active catalyst; and hydrolysis of 1c, furnishing the final α-alkylation product 1d and regenerating L1. Among the seven steps, reductive elimination is the rate-determining step. The C-H bond preactivation via agostic interaction is crucial for the bond activation. The mechanism rationalizes the experimental puzzles: why only L1 among several candidates performed perfectly, whereas others failed, and why Wilkinson's catalyst commonly used in MOCC systems performed poorly. Based on the established mechanism and stimulated by other relevant experimental reactions, we attempted to enrich MOCC chemistry computationally, exemplifying how to develop new organic catalysts and proposing L7 to be an alternative for L1 and demonstrating the great potential of expanding the hitherto exclusive use of Rh(I)/Rh(III) manifold to Co(0)/Co(II) redox cycling in developing MOCC systems.

  5. Rh(III)-catalyzed synthesis of sultones through C-H activation directed by a sulfonic acid group.

    PubMed

    Qi, Zisong; Wang, Mei; Li, Xingwei

    2014-09-01

    A new rhodium-catalyzed synthesis of sultones via the oxidative coupling of sulfonic acids with internal alkynes is described. The reaction proceeds via aryl C-H activation assisted by a sulfonic acid group.

  6. Use of Trifluoromethyl Groups for Catalytic Benzylation and Alkylation with Subsequent Hydrodefluorination.

    PubMed

    Zhu, Jiangtao; Pérez, Manuel; Caputo, Christopher B; Stephan, Douglas W

    2016-01-22

    The electrophilic organofluorophosphonium catalyst [(C6F5)3PF][B(C6F5)4] is shown to effect benzylation or alkylation by aryl and alkyl CF3 groups with subsequent hydrodefluorination, thus resulting in a net transformation of CF3 into CH2-aryl fragments. In the case of alkyl CF3 groups, Friedel-Crafts alkylation by the difluorocarbocation proceeded without cation rearrangement, in contrast to the corresponding reactions of alkyl monofluorides. PMID:26663711

  7. Meta-selective C-H functionalization using a nitrile-based directing group and cleavable Si-tether.

    PubMed

    Lee, Sunggi; Lee, Hyelee; Tan, Kian L

    2013-12-18

    A nitrile-based template that enables meta-selective C-H bond functionalization was developed. The template is applicable to a range of substituted arenes and tolerates a variety of functional groups. The directing group uses a silicon atom for attachment, allowing for a facile introduction/deprotection strategy increasing the synthetic practicality of this template.

  8. Manganese-catalyzed selective oxidation of aliphatic C-H groups and secondary alcohols to ketones with hydrogen peroxide.

    PubMed

    Dong, Jia Jia; Unjaroen, Duenpen; Mecozzi, Francesco; Harvey, Emma C; Saisaha, Pattama; Pijper, Dirk; de Boer, Johannes W; Alsters, Paul; Feringa, Ben L; Browne, Wesley R

    2013-09-01

    An efficient and simple method for selective oxidation of secondary alcohols and oxidation of alkanes to ketones is reported. An in situ prepared catalyst is employed based on manganese(II) salts, pyridine-2-carboxylic acid, and butanedione, which provides good-to-excellent conversions and yields with high turnover numbers (up to 10 000) with H2 O2 as oxidant at ambient temperatures. In substrates bearing multiple alcohol groups, secondary alcohols are converted to ketones selectively and, in general, benzyl C-H oxidation proceeds in preference to aliphatic C-H oxidation.

  9. Elementary steps of iron catalysis: exploring the links between iron alkyl and iron olefin complexes for their relevance in C-H activation and C-C bond formation.

    PubMed

    Casitas, Alicia; Krause, Helga; Goddard, Richard; Fürstner, Alois

    2015-01-26

    The alkylation of complexes 2 and 7 with Grignard reagents containing β-hydrogen atoms is a process of considerable relevance for the understanding of C-H activation as well as C-C bond formation mediated by low-valent iron species. Specifically, reaction of 2 with EtMgBr under an ethylene atmosphere affords the bis-ethylene complex 1 which is an active precatalyst for prototype [2+2+2] cycloaddition reactions and a valuable probe for mechanistic studies. This aspect is illustrated by its conversion into the bis-alkyne complex 6 as an unprecedented representation of a cycloaddition catalyst loaded with two substrates molecules. On the other hand, alkylation of 2 with 1 equivalent of cyclohexylmagnesium bromide furnished the unique iron alkyl species 11 with a 14-electron count, which has no less than four β-H atoms but is nevertheless stable at low temperature against β-hydride elimination. In contrast, the exhaustive alkylation of 1 with cyclohexylmagnesium bromide triggers two consecutive C-H activation reactions mediated by a single iron center. The resulting complex has a diene dihydride character in solution (15), whereas its structure in the solid state is more consistent with an η(3) -allyl iron hydride rendition featuring an additional agostic interaction (14). Finally, the preparation of the cyclopentadienyl iron complex 25 illustrates how an iron-mediated C-H activation cascade can be coaxed to induce a stereoselective CC bond formation. The structures of all relevant new iron complexes in the solid state are presented. PMID:25504935

  10. Distance-Dependent Attractive and Repulsive Interactions of Bulky Alkyl Groups.

    PubMed

    Hwang, Jungwun; Li, Ping; Smith, Mark D; Shimizu, Ken D

    2016-07-01

    The stabilizing and destabilizing effects of alkyl groups on an aromatic stacking interaction were experimentally measured in solution. The size (Me, Et, iPr, and tBu) and position (meta and para) of the alkyl groups were varied in a molecular balance model system designed to measure the strength of an intramolecular aromatic interaction. Opposite stability trends were observed for alkyl substituents at different positions on the aromatic rings. At the closer meta-position, smaller groups were stabilizing and larger groups were destabilizing. Conversely, at the farther para-position, the larger alkyl groups were systematically more stabilizing with the bulky tBu group forming the strongest stabilizing interaction. X-ray crystal structures showed that the stabilizing interactions of the small meta-alkyl and large para-alkyl groups were due to their similar distances and van der Waals contact areas with the edge of opposing aromatic ring.

  11. The amide C-N bond of isatins as the directing group and the internal oxidant in Ru-catalyzed C-H activation and annulation reactions: access to 8-amido isocoumarins.

    PubMed

    Kaishap, Partha Pratim; Sarma, Bipul; Gogoi, Sanjib

    2016-07-28

    The N-O, N-N and O-O bonds are the frequently used internally oxidative directing groups used in various redox-neutral coupling reactions. The sole use of the C-N bond as the oxidizing directing group was reported recently by Li X. and co-workers for the Rh(iii)-catalyzed C-H activation of phenacyl ammonium salts. Herein, we report the use of the amide C-N bond of isatins as the oxidizing directing group for the Ru(ii)-catalyzed redox-neutral C-H activation and annulation reactions with alkynes which afford 8-amido isocoumarins. The reaction also features excellent regioselectivity with alkyl aryl substituted alkynes. PMID:27417438

  12. Group 1 and 2 cyclic (alkyl)(amino)carbene complexes.

    PubMed

    Turner, Zoë R; Buffet, Jean-Charles

    2015-08-01

    The first examples of cyclic (alkyl)(amino)carbene (CAAC) ligands bound to electropositive metal centres (K, Mg, Sr and Ba) have been isolated and characterised. Preliminary studies demonstrate that all complexes are active for polar monomer polymerisation under ambient conditions affording desirable hydroxyl-terminated telechelic polymers.

  13. Catalytic synthesis of n-alkyl arenes through alkyl group cross-metathesis.

    PubMed

    Dobereiner, Graham E; Yuan, Jian; Schrock, Richard R; Goldman, Alan S; Hackenberg, Jason D

    2013-08-28

    n-Alkyl arenes were prepared in a one-pot tandem dehydrogenation/olefin metathesis/hydrogenation sequence directly from alkanes and ethylbenzene. Excellent selectivity was observed when ((tBu)PCP)IrH2 was paired with tungsten monoaryloxide pyrrolide complexes such as W(NAr)(C3H6)(pyr)(OHIPT) (1a) [Ar = 2,6-i-Pr2C6H3; pyr = pyrrolide; OHIPT = 2,6-(2,4,6-i-Pr3C6H2)2C6H3O]. Complex 1a was also especially active in n-octane self-metathesis, providing the highest product concentrations reported to date. The thermal stability of selected olefin metathesis catalysts allowed elevated temperatures and extended reaction times to be employed. PMID:23909821

  14. Functional-group specific aptamers indirectly recognizing compounds with alkyl amino group.

    PubMed

    Mei, Hongcheng; Bing, Tao; Yang, Xiaojuan; Qi, Cui; Chang, Tianjun; Liu, Xiangjun; Cao, Zehui; Shangguan, Dihua

    2012-09-01

    Aptamers are usually generated against a specific molecule. Their high selectivity makes them only suitable for studying specific targets. Since it is nearly impossible to generate aptamers for every molecule, it can be of great interest to select aptamers recognizing a common feature of a group of molecules in many applications. In this paper, we describe the selection of aptamers for indirect recognition of alkyl amino groups. Because amino groups are small and positive charged, we introduced a protection group, p-nitrobenzene sulfonyl (p-nosyl) to convert them into a form suitable for aptamer selection. Taking N(ε)-p-nosyl-L-lysine (PSL) as a target, we obtained a group of aptamers using the SELEX technique. Two optimized aptamers, M6b-M14 and M13a exhibit strong affinity to PSL with the K(d) values in the range of 2-5 μM. They also show strong affinity to other compounds containing p-nosyl-protected amino groups except those also possessing an α-carboxyl group. Both aptamers adopt an antiparallel G-quadruplex structure when binding to targets. An aptamer beacon based on M6b-M14 showed good selectivity toward the reaction mixture of p-nosyl-Cl and alkyl amino compounds, and could recognize lysine from amino acid mixtures indirectly, suggesting that aptamers against a common moiety of a certain type of molecules can potentially lead to many new applications. Through this study, we have demonstrated the ability to select aptamers for a specific part of an organic compound, and the chemical conversion approach may prove to be valuable for aptamer selection against molecules that are generally difficult for SELEX.

  15. Dirhodium-catalyzed C-H arene amination using hydroxylamines.

    PubMed

    Paudyal, Mahesh P; Adebesin, Adeniyi Michael; Burt, Scott R; Ess, Daniel H; Ma, Zhiwei; Kürti, László; Falck, John R

    2016-09-01

    Primary and N-alkyl arylamine motifs are key functional groups in pharmaceuticals, agrochemicals, and functional materials, as well as in bioactive natural products. However, there is a dearth of generally applicable methods for the direct replacement of aryl hydrogens with NH2/NH(alkyl) moieties. Here, we present a mild dirhodium-catalyzed C-H amination for conversion of structurally diverse monocyclic and fused aromatics to the corresponding primary and N-alkyl arylamines using NH2/NH(alkyl)-O-(sulfonyl)hydroxylamines as aminating agents; the relatively weak RSO2O-N bond functions as an internal oxidant. The methodology is operationally simple, scalable, and fast at or below ambient temperature, furnishing arylamines in moderate-to-good yields and with good regioselectivity. It can be readily extended to the synthesis of fused N-heterocycles. PMID:27609890

  16. Dependence of micelle size and shape on detergent alkyl chain length and head group.

    PubMed

    Oliver, Ryan C; Lipfert, Jan; Fox, Daniel A; Lo, Ryan H; Doniach, Sebastian; Columbus, Linda

    2013-01-01

    Micelle-forming detergents provide an amphipathic environment that can mimic lipid bilayers and are important tools for solubilizing membrane proteins for functional and structural investigations in vitro. However, the formation of a soluble protein-detergent complex (PDC) currently relies on empirical screening of detergents, and a stable and functional PDC is often not obtained. To provide a foundation for systematic comparisons between the properties of the detergent micelle and the resulting PDC, a comprehensive set of detergents commonly used for membrane protein studies are systematically investigated. Using small-angle X-ray scattering (SAXS), micelle shapes and sizes are determined for phosphocholines with 10, 12, and 14 alkyl carbons, glucosides with 8, 9, and 10 alkyl carbons, maltosides with 8, 10, and 12 alkyl carbons, and lysophosphatidyl glycerols with 14 and 16 alkyl carbons. The SAXS profiles are well described by two-component ellipsoid models, with an electron rich outer shell corresponding to the detergent head groups and a less electron dense hydrophobic core composed of the alkyl chains. The minor axis of the elliptical micelle core from these models is constrained by the length of the alkyl chain, and increases by 1.2-1.5 Å per carbon addition to the alkyl chain. The major elliptical axis also increases with chain length; however, the ellipticity remains approximately constant for each detergent series. In addition, the aggregation number of these detergents increases by ∼16 monomers per micelle for each alkyl carbon added. The data provide a comprehensive view of the determinants of micelle shape and size and provide a baseline for correlating micelle properties with protein-detergent interactions.

  17. Iron-Catalyzed Ortho C-H Methylation of Aromatics Bearing a Simple Carbonyl Group with Methylaluminum and Tridentate Phosphine Ligand.

    PubMed

    Shang, Rui; Ilies, Laurean; Nakamura, Eiichi

    2016-08-17

    Iron-catalyzed C-H functionalization of aromatics has attracted widespread attention from chemists in recent years, while the requirement of an elaborate directing group on the substrate has so far hampered the use of simple aromatic carbonyl compounds such as benzoic acid and ketones, much reducing its synthetic utility. We describe here a combination of a mildly reactive methylaluminum reagent and a new tridentate phosphine ligand for metal catalysis, 4-(bis(2-(diphenylphosphanyl)phenyl)phosphanyl)-N,N-dimethylaniline (Me2N-TP), that allows us to convert an ortho C-H bond to a C-CH3 bond in aromatics and heteroaromatics bearing simple carbonyl groups under mild oxidative conditions. The reaction is powerful enough to methylate all four ortho C-H bonds in benzophenone. The reaction tolerates a variety of functional groups, such as boronic ester, halide, sulfide, heterocycles, and enolizable ketones.

  18. Iron-Catalyzed Ortho C-H Methylation of Aromatics Bearing a Simple Carbonyl Group with Methylaluminum and Tridentate Phosphine Ligand.

    PubMed

    Shang, Rui; Ilies, Laurean; Nakamura, Eiichi

    2016-08-17

    Iron-catalyzed C-H functionalization of aromatics has attracted widespread attention from chemists in recent years, while the requirement of an elaborate directing group on the substrate has so far hampered the use of simple aromatic carbonyl compounds such as benzoic acid and ketones, much reducing its synthetic utility. We describe here a combination of a mildly reactive methylaluminum reagent and a new tridentate phosphine ligand for metal catalysis, 4-(bis(2-(diphenylphosphanyl)phenyl)phosphanyl)-N,N-dimethylaniline (Me2N-TP), that allows us to convert an ortho C-H bond to a C-CH3 bond in aromatics and heteroaromatics bearing simple carbonyl groups under mild oxidative conditions. The reaction is powerful enough to methylate all four ortho C-H bonds in benzophenone. The reaction tolerates a variety of functional groups, such as boronic ester, halide, sulfide, heterocycles, and enolizable ketones. PMID:27487172

  19. First carbamates conversion to amides by simple alkyl group transfer from trialkylalanes.

    PubMed

    El Kaim, Laurent; Grimaud, Laurence; Lee, Anabelle; Perroux, Yannick; Tirla, Cornelia

    2004-02-01

    [reaction: see text] N-Monosubstituted carbamates are cleanly converted to amides under treatment with trialkylaluminum. This reaction involves an aluminum-assisted internal delivery of alkyl groups. It can be applied to new and mild protecting group strategies for alcohols.

  20. Palladium-Catalyzed Double C-H Functionalization of Arenes at the Positions ortho and meta to Their Directing Group: Concise Synthesis of Benzocyclobutenes.

    PubMed

    Nanjo, Takeshi; Tsukano, Chihiro; Takemoto, Yoshiji

    2016-01-01

    The synthesis of benzocyclobutenes from simple arenes bearing a directing group was investigated via the palladium-catalyzed cyclization of norbornene derivatives. This approach allowed for the facile construction of benzocyclobutenes along with the double functionalization of the C-H bonds at the positions ortho and meta to the directing group. This result shows that the key palladacyclopentene intermediate in the Catellani reaction can be prepared by the directed double ortho C-H activation of the substrate. The results of this study also revealed that the combination of an N-protected amino acid with benzoquinone (BQ) was effective for this transformation.

  1. Molecular Orientation Analysis of Alkyl Methylene Groups from Quantitative Coherent Anti-Stokes Raman Scattering Spectroscopy.

    PubMed

    Zhang, Chi; Wang, Jie; Jasensky, Joshua; Chen, Zhan

    2015-04-16

    Quantitative data analysis in coherent anti-Stokes Raman scattering (CARS) spectroscopy is important for extracting molecular structural information. We developed a method to derive molecular tilt angle with respect to the surface normal based on quantitative CARS spectral analysis. We showed that the tilt angle of methylene alkyl chains on a surface can be directly obtained from the CH2 symmetric/asymmetric peak ratio in a CARS spectrum. The lipid alkyl chain tilt angle from a lipid monolayer was measured to be ∼0° and was verified by sum frequency generation spectroscopy, which probes the orientations of the lipid methyl end groups. The tilt angle of a silane monolayer alkyl chain was derived to be ∼35°, which agrees with the theoretical prediction. This method is submonolayer sensitive and can also be used to interpret polarization-dependent signals in CARS microscopy. It can be applied to elucidate detailed molecular structure from CARS spectroscopic and microscopic measurements.

  2. Dirhodium Catalyzed C-H Arene Amination using Hydroxylamines

    PubMed Central

    Paudyal, Mahesh P.; Adebesin, Adeniyi Michael; Burt, Scott R.; Ess, Daniel H.; Ma, Zhiwei; Kürti, László; Falck, John R.

    2016-01-01

    Primary and N-alkyl arylamine motifs are key functional groups in pharmaceuticals, agrochemicals and functional materials as well as in bioactive natural products. However, there is a dearth of generally applicable methods for the direct replacement of aryl hydrogens with –NH2/-NH-alkyl moieties. Here, we present a mild dirhodium-catalyzed C-H amination for conversion of structurally diverse monocyclic and fused aromatics to the corresponding primary and N-alkyl arylamines using either NH2/NHalkyl-O-(sulfonyl)hydroxylamines as aminating agents; the relatively weak RSO2O-N bond functions as an internal oxidant. The methodology is operationally simple, scalable, and fast at or below ambient temperature, furnishing arylamines in moderate-to-good yields and with good regioselectivity. It can be readily extended to the synthesis of fused N-heterocycles. PMID:27609890

  3. Synthesis of silicon-functionalized dibenzosilaborins by intramolecular B-H/C-H dehydrogenative cyclization and their tunable photophysical and chemical properties by silyl groups.

    PubMed

    Kawachi, Atsushi; Morisaki, Hiroshi; Hirofuji, Tatsuya; Yamamoto, Yohsuke

    2013-09-27

    A bit borane: Silicon-functionalized dibenzosilaborins were prepared by intramolecular B-H/C-H dehydrogenative cyclization of o-(silyl)(hydroboryl)benzenes. The hydrosilyl derivative (X=H) can be converted into the fluorosilane (X=F) and chlorosilane (X=Cl). UV/Vis and fluorescence spectra are influenced by the functional groups X on the silicon atom through σ*-π* conjugation. PMID:24027003

  4. 2,3-Dicyclohexylsuccinimide as a directing/protecting group for the regioselective glycosylation or alkylation of purines.

    PubMed

    Pal, Ayan; Salandria, Kerry J; Arico, Joseph W; Schlegel, Mark K; McLaughlin, Larry W

    2013-04-11

    Here we describe the synthesis and application of a novel 2,3-dicyclohexylsuccinimide (Cy2SI) protecting group towards regioselective purine glycosylation and alkylation reactions. This bulky protecting group promotes high regioselectivity during the glycosylation (as well as diastereoselectivity) or alkylation of purines using Hoffer's chlorosugar or tert-butyl bromoacetate, respectively. Cy2SI offers the additional synthetic advantage that other base-labile protecting groups, such as toluoyl esters, can be selectively removed in its presence without affecting the imide.

  5. The mechanism of 1,4 alkyl group migration in hypervalent halonium ylides: the stereochemical course.

    PubMed

    Moriarty, Robert M; Tyagi, Sachin; Ivanov, Daniela; Constantinescu, Mircea

    2008-06-18

    Rhodium(II)-acetate-catalyzed decomposition of either 1,3-cyclohexanedione phenyliodonium ylide or 5,5-dimethyl-1,3-cyclohexanedione phenyliodonium ylide in the presence of alkyl halides yields the corresponding 3-alkoxy-2-halocyclohex-2-enones via a 1,4 alkyl group migration shown to be concerted and intramolecular. In the case of (S)-alpha-phenethyl chloride, the rearrangement proceeds with essentially 88.6% retention of configuration. Theoretical calculations at the B3LYP/6-31G level reveal an activation energy of 5.4 kcal/mol for the process. A Claisen-like rearrangement occurs in the case where allylic halides, such as dimethylallyl or methallyl chorides, are used. The mechanistic pathway proposed for these processes involves addition of the halogen atom of the alkyl or allyl halide to the rhodium carbenoid from the iodonium ylide to yield a halonium intermediate that undergoes halogen to oxygen group migration. Aryl halides, such as chloro-, bromo-, iodo-, and fluorobenzene, behave differently under the same reaction conditions, yielding the product of electrophilic aromatic substitution, namely, the 2-(4-halophenyl) 1,3-cyclohexanedione.

  6. Which Density Functional Is the Best in Computing C-H Activation Energies by Pincer Complexes of Late Platinum Group Metals?

    PubMed

    Lai, Wenzhen; Yao, Jiannian; Shaik, Sason; Chen, Hui

    2012-09-11

    Using the recently proposed corrective LCCSD(T) method as a reference, we systematically assess the widely used approximate density functionals to reproduce C-H bond activation barriers by pincer complexes of the late platinum group transition metals (TMs) (TM = Rh, Pd, Ir, Pt). The pincer ligands explored here cover a wide range of PNP, PCP, POCOP, NCN, and SCS types. Interestingly, B3LYP is found to be the most accurate functional, followed by several others previously identified as well-performing functionals, like B2GP-PLYP, B2-PLYP, and PBE0. However, all tested functionals were found to exhibit the following uniform trends: (1) the DFT barriers for reactions of group 9 TM (Rh and Ir) pincer complexes show higher accuracy compared with those for group 10 TM (Pd and Pt) reactions; (2) within the same group, 5d TM pincer complexes have higher accuracy than 4d TM ones. Consequently, the barriers for C-H activation by Pd(II) pincer complexes were found to be the least accurate among the four TMs in almost all functionals tested here. The DFT empirical dispersion correction (DFT-D3) is shown to have a very small effect on barrier height. This study has some implications for other σ-bond activations like H-H, C-C, and C-halogen bonds by late platinum group pincer complexes.

  7. Group additivity values for estimating the enthalpy of formation of organic compounds: an update and reappraisal. 2. C, H, N, O, S, and halogens.

    PubMed

    Holmes, John L; Aubry, Christiane

    2012-07-01

    This study extends a previous publication on group additivity values (GAVs) for the elements C, H, and O, to include the elements nitrogen, sulfur, and the halogens. The present state and utility of the Benson additivity schemes for estimating the enthalpy of formation (Δ(f)H(0)) of organic compounds are again described, extending them to include more elements. Old and new GAVs for a wide variety of compounds are provided and are revised where necessary. When new terms are proposed, or old ones are significantly altered, the rationale for so doing is presented. GAV derived ring strain values for benzene and pyridine indicate that the aromatic stabilization of each is essentially the same. As before, the thermochemical consequences of replacing one functional group by another are also shown, thus permitting quick shortcuts to the estimation of new Δ(f)H(0) values.

  8. Alkyl peroxides: Effect of substituent groups on the torsional mode around the O―O bond

    NASA Astrophysics Data System (ADS)

    Maciel, Glauciete S.; Bitencourt, Ana Carla P.; Ragni, Mirco; Aquilanti, Vincenzo

    We present here a systematic study by quantum mechanical methods of structural and energetic properties for a series of substitutions by alkyl groups of the hydrogens in hydrogen peroxide. The emphasis is on the torsion around the peroxidic bond, which leads to the chirality changing stereomutation. The dihedral angle dependence of the geometrical features and of the dipole moment is discussed with reference to previous experimental and theoretical information, and with respect to the preceding paper on hydrogen peroxide (Maciel et al., Chem Phys Lett, 2006, 432, 383). This information is of interest for chiral separation experiments as well as in view of a possible dynamical mechanism for chirality exchange by molecular collisions. The cis and trans barriers appear to vary remarkably upon substitution by alkyl groups (methyl, ethyl, n- and iso-propyl, sec- and tert-butyl hydroperoxides), the most important property being their geometrical dimensions. As the latter increase, tendency for the equilibrium configuration towards the trans structure increases, so that the trans barrier becomes negligible for dimethyl and diethyl peroxides and for n- and iso-butyl hydroperoxides, giving essentially achiral molecules. For the chiral ones (HOOH, CH3OOH, and C2H5OOH) torsional level energies and eigenfunctions are calculated and their distribution as a function of temperature determined. Their use is exemplified by a calculation of the dipole moment of hydrogen peroxide at room temperature, reconciling previous disagreement between theory and experiment.0

  9. Effects of temperature and alkyl groups of poly(alkyl methacrylate)s on inter- and intramolecular interactions of excited singlet states of pyrenyl guest molecules.

    PubMed

    Abraham, Shibu; Atvars, Teresa D Z; Weiss, Richard G

    2010-09-30

    Temperature-induced changes in the static and dynamic characteristics of the fluorescence from pyrene and N,N-dimethyl-3-(pyren-1-yl)propan-1-amine (PyC3NMe2) have been used to determine the locations and mobilities of these probes in the anisotropic environments provided by films of 5 poly(alkyl methacrylate) (PAMA) polymers in which alkyl is ethyl, butyl, isobutyl, cyclohexyl, and hexadecyl. Whereas emission from pyrene reports on the polarity of the guest sites and the ability of molecules to diffuse translationally between sites, emission from PyC3NMe2 yields information about the fluidity and the shape of the guest sites. Data have been obtained from 20 to >400 K, a range that spans the onsets of several relaxation processes in the hosts. Those data indicate that the pyrenyl groups reside near to ester functionalities in most of the PAMAs, although the distance from them (and the main chains) depends upon the bulkiness of the alkyl groups. Among the most important conclusions derived from this research is that the rates of segmental relaxation phenomena near the probe molecules--and not free volume, as was concluded previously from fluorescence measurements in polyethylene films--are the dominant contributors to the fluorescence changes. Of practical importance, changes in those rates have permitted the onset temperatures of many of the relaxation phenomena occurring in the vicinity of the probes to be located.

  10. Inverse neighboring group participation: explanation of an unusual S→N alkyl migration of isothiuronium salts containing a lactone group.

    PubMed

    Váňa, Jiří; Sedlák, Miloš; Kammel, Richard; Roithová, Jana; Škríba, Anton; Jašík, Juraj; Hanusek, Jiří

    2013-05-01

    A detailed experimental and DFT study of the S to N alkyl migration of substituted S-(1(3H)-isobenzofuranon-3-yl)isothiuronium bromide to N,N'-dimethyl-N-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thiourea provided evidence for the existence of an unusual double displacement mechanism involving two consecutive back-side S(N)2 reactions where a carboxylate anion has a crucial role both as a leaving group as well as an internal nucleophile. The thiazetidine zwitterionic species that is involved in this mechanism as an intermediate was characterized by infrared multiphoton dissociation spectroscopy and was trapped with methyl iodide. It was found that the intermediate has a structure of a free ion pair. The double-displacement mechanism can be considered as a new type of inverse lactone neighboring group participation.

  11. New directing groups for metal-catalyzed asymmetric carbon-carbon bond-forming processes: stereoconvergent alkyl-alkyl Suzuki cross-couplings of unactivated electrophiles.

    PubMed

    Wilsily, Ashraf; Tramutola, Francesco; Owston, Nathan A; Fu, Gregory C

    2012-04-01

    The ability of two common protected forms of amines (carbamates and sulfonamides) to serve as directing groups in Ni-catalyzed Suzuki reactions has been exploited in the development of catalytic asymmetric methods for cross-coupling unactivated alkyl electrophiles. Racemic secondary bromides and chlorides undergo C-C bond formation in a stereoconvergent process in good ee at room temperature in the presence of a commercially available Ni complex and chiral ligand. Structure-enantioselectivity studies designed to elucidate the site of binding to Ni (the oxygen of the carbamate and of the sulfonamide) led to the discovery that sulfones also serve as useful directing groups for asymmetric Suzuki cross-couplings of racemic alkyl halides. To our knowledge, this investigation provides the first examples of the use of sulfonamides or sulfones as effective directing groups in metal-catalyzed asymmetric C-C bond-forming reactions. A mechanistic study established that transmetalation occurs with retention of stereochemistry and that the resulting Ni-C bond does not undergo homolysis in subsequent stages of the catalytic cycle.

  12. Formation of self-assembled monolayers with homogeneously mixed, loosely packed alkyl groups using unsymmetrical dialkyldithiophosphinic acids.

    PubMed

    San Juan, Ronan R; Carmichael, Tricia Breen

    2012-12-21

    We report the formation and characterization of self-assembled monolayers (SAMs) formed from unsymmetrical dialkyldithiophosphinic acid (R(1)R(2)DTPA) adsorbates [CH(3)(CH(2))(n)][CH(3)(CH(2))(15)]P(S)SH (n = 5, 9) on gold substrates. These SAMs were characterized using X-ray photoelectron spectroscopy, reflection-absorption infrared spectroscopy, contact angle goniometry, electrochemical impedance spectroscopy, and atomic force microscopy. Unsymmetrical R(1)R(2)DTPA SAMs contain mixtures of bidentate and monodentate adsorbates, similar to SAMs formed from analogous symmetrical R(2)DTPAs. In unsymmetrical R(1)R(2)DTPA SAMs, however, the short alkyl substituent of the R(1)R(2)DTPA adsorbates enforces spacing between the long hexadecyl substituents, which disrupts van der Waals interactions and causes the hexadecyl groups to be loosely packed and disordered. The structure of the SAM depends on the length of the short alkyl substituent: The hexyl chains in the C(6)C(16)DTPA SAM are not long enough to stabilize the alkyl zone close to the substrate, leading to highly disordered SAMs with a low molecular packing density in which the hexadecyl chains lie down to fill the gaps between adjacent adsorbates. In contrast, the additional van der Waals interactions provided by the decyl chains of the C(10)C(16)DTPA SAM enable dense molecular packing in the alkyl zone close to the substrate. The structure of the SAM consists of a zone close to the substrate composed of a packed alkyl layer, with hexadecyl chains protruding above to form a loosely packed, disordered alkyl layer. Regardless of the structural differences between the C(6)C(16)DTPA and C(10)C(16)DTPA SAMs, both SAMs exhibit homogeneous mixing of the alkyl chains within the SAM, demonstrating that binding two different chains to a single headgroup is an effective method to prevent phase segregation.

  13. Effects of alkyl chain length and solvents on thermodynamic dissociation constants of the ionic liquids with one carboxyl group in the alkyl chain of imidazolium cations.

    PubMed

    Chen, Yuehua; Wang, Huiyong; Wang, Jianji

    2014-05-01

    Thermodynamic dissociation constants of the Brønsted acidic ionic liquids (ILs) are important for their catalytic and separation applications. In this work, a series of imidazolium bromides with one carboxylic acid substitute group in their alkyl chain ([{(CH2)nCOOH}mim]Br, n = 1,3,5,7) have been synthesized, and their dissociation constants (pKa) at different ionic strengths have been determined in aqueous and aqueous organic solvents at 0.1 mole fraction (x) of ethanol, glycol, iso-propanol, and dimethyl sulfoxide by potentiometric titrations at 298.2 K. The standard thermodynamic dissociation constants (pKa(T)) of the ILs in these solvents were calculated from the extended Debye-Hückel equation. It was found that the pKa values increased with the increase of ionic strength of the media and of the addition of organic solvent in water. The pKa(T) values also increased with the increase of the alkyl chain length of cations of the ILs. In addition, the effect of solvent nature on pKa(T) values is interpreted from solvation of the dissociation components and their Gibbs energy of transfer from water to aqueous organic solutions. PMID:24720707

  14. Effects of alkyl chain length and solvents on thermodynamic dissociation constants of the ionic liquids with one carboxyl group in the alkyl chain of imidazolium cations.

    PubMed

    Chen, Yuehua; Wang, Huiyong; Wang, Jianji

    2014-05-01

    Thermodynamic dissociation constants of the Brønsted acidic ionic liquids (ILs) are important for their catalytic and separation applications. In this work, a series of imidazolium bromides with one carboxylic acid substitute group in their alkyl chain ([{(CH2)nCOOH}mim]Br, n = 1,3,5,7) have been synthesized, and their dissociation constants (pKa) at different ionic strengths have been determined in aqueous and aqueous organic solvents at 0.1 mole fraction (x) of ethanol, glycol, iso-propanol, and dimethyl sulfoxide by potentiometric titrations at 298.2 K. The standard thermodynamic dissociation constants (pKa(T)) of the ILs in these solvents were calculated from the extended Debye-Hückel equation. It was found that the pKa values increased with the increase of ionic strength of the media and of the addition of organic solvent in water. The pKa(T) values also increased with the increase of the alkyl chain length of cations of the ILs. In addition, the effect of solvent nature on pKa(T) values is interpreted from solvation of the dissociation components and their Gibbs energy of transfer from water to aqueous organic solutions.

  15. How Does the Ionic Liquid Organizational Landscape Change when Nonpolar Cationic Alkyl Groups Are Replaced by Polar Isoelectronic Diethers?

    SciTech Connect

    Kashyap, Hemant K.; Santos, Cherry S.; Daly, Ryan P.; Hettige, Jeevapani J.; Murthy, N. Sanjeeva; Shirota, Hideaki; Edward W. Castner Jr.; Margulis, Claudio J.

    2012-12-21

    The X-ray scattering experiments and molecular dynamics simulations have been performed to investigate the structure of four room temperature ionic liquids (ILs) comprising the bis(trifluoromethylsulfonyl)amide (NTf2) anion paired with the triethyloctylammonium (N2228+) and triethyloctylphosphonium (P2228+) cations and their isoelectronic diether analogs, the (2-ethoxyethoxy)ethyltriethylammonium (N222(2O2O2)+) and (2-ethoxyethoxy)ethyltriethylphosphonium (P222(2O2O2)+) cations. Agreement between simulations and experiments is good and permits a clear interpretation of the important topological differences between these systems. The first sharp diffraction peak (or prepeak) in the structure function S(q) that is present in the case of the liquids containing the alkyl-substituted cations is absent in the case of the diether substituted analogs. Using different theoretical partitioning schemes for the X-ray structure function, we show that the prepeak present in the alkyl-substituted ILs arises from polarity alternations between charged groups and nonpolar alkyl tails. In the case of the diether substituted ILs, we find considerable curling of tails. Anions can be found with high probability in two different environments: close to the cationic nitrogen (phosphorus) and also close to the two ether groups. Moreover, for the two diether systems, anions are found in locations from which they are excluded in the alkyl-substituted systems. This removes the longer range (polar/nonpolar) pattern of alternation that gives rise to the prepeak in alkyl-substituted systems.

  16. Low-valent cobalt catalysis: new opportunities for C-H functionalization.

    PubMed

    Gao, Ke; Yoshikai, Naohiko

    2014-04-15

    catalysts. The combination of a cobalt-NHC catalyst and a Grignard reagent allows directed aromatic C-H functionalizations with electrophiles such as aldimines, aryl chlorides, and alkyl chlorides or bromides. This second reaction has a particularly broad scope, allowing us to introduce secondary alkyl groups at the ortho position of aryl imines, a difficult reaction to carry out by other means. Serendipitously, we found that a cobalt-Xantphos complex catalyzed the third type of C-H functionalization: the addition of an arylzinc reagent to an alkyne to afford ortho-alkenylarylzinc species through a 1,4-cobalt migration. This "migratory arylzincation" allowed us to quickly construct a diverse group of functionalized benzothiophenes and benzoselenophenes. Collectively, our studies of cobalt catalysis have provided cost-effective catalysts and milder conditions for existing C-H functionalizations and have led to some unprecedented, attractive chemical transformations. PMID:24576170

  17. Site-selective and stereoselective functionalization of unactivated C-H bonds

    NASA Astrophysics Data System (ADS)

    Liao, Kuangbiao; Negretti, Solymar; Musaev, Djamaladdin G.; Bacsa, John; Davies, Huw M. L.

    2016-05-01

    The laboratory synthesis of complex organic molecules relies heavily on the introduction and manipulation of functional groups, such as carbon-oxygen or carbon-halogen bonds; carbon-hydrogen bonds are far less reactive and harder to functionalize selectively. The idea of C-H functionalization, in which C-H bonds are modified at will instead of the functional groups, represents a paradigm shift in the standard logic of organic synthesis. For this approach to be generally useful, effective strategies for site-selective C-H functionalization need to be developed. The most practical solutions to the site-selectivity problem rely on either intramolecular reactions or the use of directing groups within the substrate. A challenging, but potentially more flexible approach, would be to use catalyst control to determine which site in a particular substrate would be functionalized. Here we describe the use of dirhodium catalysts to achieve highly site-selective, diastereoselective and enantioselective C-H functionalization of n-alkanes and terminally substituted n-alkyl compounds. The reactions proceed in high yield, and functional groups such as halides, silanes and esters are compatible with this chemistry. These studies demonstrate that high site selectivity is possible in C-H functionalization reactions without the need for a directing or anchoring group present in the molecule.

  18. C-H bond activation of the methyl group of the supporting ligand in an osmium(III) complex upon reaction with H2O2: formation of an organometallic osmium(IV) complex.

    PubMed

    Sugimoto, Hideki; Ashikari, Kenji; Itoh, Shinobu

    2013-01-18

    Oxidation of the hydroxoosmium(III) complex resulted in C-H bond activation of the methyl group of the supporting ligand (N,N'-dimethyl-2,11-diaza[3.3](2,6)pyridinophane). The product was an osmium(IV) complex exhibiting a seven-coordinate structure with an additional Os-CH(2) bond.

  19. Isomerization of the alkyl ligand in (Me[sub 2]NCS[sub 2])Pd(PR[sub 3])(alkyl) complexes. Influences of heteroatom substitutents in the alkyl group on the alkyl isomerization equilibria and stability of alkylmetal complexes

    SciTech Connect

    Reger, D.L.; Garza, D.G.; Lebioda, L. )

    1992-12-01

    A series of complexes of unusually stable alkylpalladium complexes of the formula (Me[sub 2]NCS[sub 2])Pd(PR[sub 3])(alkyl) (R = Me, Et) have been prepared from the reaction of (Me[sub 2]NCS[sub 2])Pd(PR[sub 3])Cl and the appropriate alkyllithium or Grignard reagent. The substituted complexes (Me[sub 2]NCS[sub 2])Pd(PEt[sub 3])(CH[sub 2]CH[sub 2]CF[sub 3]) and (Me[sub 2]NCS[sub 2])Pd(PEt[sub 3])(CH[sub 2]CH[sub 2]CN) were prepared in similar reactions, and the isomer of the latter, (Me[sub 2]NCS[sub 2])Pd(PEt[sub 3])(CH(CN)CH[sub 3]), was prepared from the low-temperature, in situ reaction of (Me[sub 2]NCS[sub 2])Pd(PEt[sub 3])H and CH[sub 2]CHCN. The reaction of (Me[sub 2]NCS[sub 2])Pd(PEt[sub 3])Cl with Li[C(CH[sub 3])[sub 3

  20. Auxiliary-assisted palladium-catalyzed arylation and alkylation of sp2 and sp3 carbon-hydrogen bonds.

    PubMed

    Shabashov, Dmitry; Daugulis, Olafs

    2010-03-24

    We have developed a method for auxiliary-directed, palladium-catalyzed beta-arylation and alkylation of sp(3) and sp(2) C-H bonds in carboxylic acid derivatives. The method employs a carboxylic acid 2-methylthioaniline- or 8-aminoquinoline amide substrate, aryl or alkyl iodide coupling partner, palladium acetate catalyst, and an inorganic base. By employing 2-methylthioaniline auxiliary, selective monoarylation of primary sp(3) C-H bonds can be achieved. If arylation of secondary sp(3) C-H bonds is desired, 8-aminoquinoline auxiliary may be used. For alkylation of sp(3) and sp(2) C-H bonds, 8-aminoquinoline auxiliary affords the best results. Some functional group tolerance is observed and amino- and hydroxy-acid derivatives can be functionalized. Preliminary mechanistic studies have been performed. A palladacycle intermediate has been isolated, characterized by X-ray crystallography, and its reactions have been studied.

  1. Synthesis and chemistry of cationic d sup 0 metal alkyl complexes

    SciTech Connect

    Jordan, R.F.

    1990-01-01

    The long term goals of this project are to design and synthesize highly unsaturated, electrophilic metal complexes and to explore their use as catalysts, reagents, and/or model systems for olefin polymerization and C-H activation chemistry. During the 1990 budget year we have focused our attention on (i) the ligand C-H activation chemistry of Cp{sub 2}Zr(CH{sub 3})(THF){sup +} and related cationic, d{sup o} Zr alkyl complexes, and (ii) the synthesis of new classes of group 4 metal alkyl complexes with non-Cp{sub 2}M ligand environments.

  2. Transition-Metal-Free Regioselective Alkylation of Pyridine N-Oxides Using 1,1-Diborylalkanes as Alkylating Reagents.

    PubMed

    Jo, Woohyun; Kim, Junghoon; Choi, Seoyoung; Cho, Seung Hwan

    2016-08-01

    Reported herein is an unprecedented base-promoted deborylative alkylation of pyridine N-oxides using 1,1-diborylalkanes as alkyl sources. The reaction proceeds efficiently for a wide range of pyridine N-oxides and 1,1-diborylalkanes with excellent regioselectivity. The utility of the developed method is demonstrated by the sequential C-H arylation and methylation of pyridine N-oxides. The reaction also can be applied for the direct introduction of a methyl group to 9-O-methylquinine N-oxide, thus it can serve as a powerful method for late-stage functionalization. PMID:27351367

  3. Radical reductions of alkyl halides bearing electron withdrawing groups with N-heterocyclic carbene boranes.

    PubMed

    Ueng, Shau-Hua; Fensterbank, Louis; Lacôte, Emmanuel; Malacria, Max; Curran, Dennis P

    2011-05-01

    1,3-Dimethylimidazol-2-ylidene borane and 2,4-dimethyl-1,2,4-triazol-3-ylidene borane are found to be useful reagents for the reduction of alkyl iodides and bromides bearing nearby electron withdrawing substituents. Signatures of radical chain reactions are seen in many cases, but ionic reductions may also be occurring with some substrates. The reagents are attractive because of their low molecular weight, their availability from inexpensive precursors, and their stability. Separation of the borane products from the target products is readily accomplished either with or without prior regeneration of the borane for later reuse. 2,4-Dimethyl-1,2,4-triazol-3-ylidene borane is versatile because both starting borane and its derived products can be removed by extraction with water.

  4. Supramolecular assembly and nanostructures of a series of luminol derivatives with aromatic/alkyl substituted groups in Langmuir-Blodgett films.

    PubMed

    Jiao, Tifeng; Xing, Yuanyuan; Zhang, Qingrui; Zhang, Li; Liu, Minghua; Zhou, Jingxin; Gao, Faming

    2014-06-01

    A series of functional luminol derivatives with aromatic and alkyl substituted groups has been designed and synthesized from the reaction of the corresponding chloride precursors with luminol. These compounds can be spread on water surface to form stable Langmuir films at the air-water interface. It has been found that UV and IR spectra confirmed the characteristic aromatic segment, imide group, and aromatic/alkyl substituted groups. In addition, for the interfacial assembly process of compounds with alkyl substituted groups, there are obvious spectral changes for the alkyl chains. AFM results indicated that various different aggregated domains may be fabricated in the transferred LB films. For all cases, the substituted groups in molecular structures have an important effect in regulating the aggregation mode and spectral changes in organized molecular films. The present results showed that the modified luminol derivatives may have potential application in functional material fields such as ECL sensor, which may give some insight to study the relationship between the molecular structures and supramolecular aggregation of amphiphiles in organized molecular films.

  5. Metal-catalysed azidation of tertiary C-H bonds suitable for late-stage functionalization.

    PubMed

    Sharma, Ankit; Hartwig, John F

    2015-01-29

    Many enzymes oxidize unactivated aliphatic C-H bonds selectively to form alcohols; however, biological systems do not possess enzymes that catalyse the analogous aminations of C-H bonds. The absence of such enzymes limits the discovery of potential medicinal candidates because nitrogen-containing groups are crucial to the biological activity of therapeutic agents and clinically useful natural products. In one prominent example illustrating the importance of incorporating nitrogen-based functionality, the conversion of the ketone of erythromycin to the -N(Me)CH2- group in azithromycin leads to a compound that can be dosed once daily with a shorter treatment time. For such reasons, synthetic chemists have sought catalysts that directly convert C-H bonds to C-N bonds. Most currently used catalysts for C-H bond amination are ill suited to the intermolecular functionalization of complex molecules because they require excess substrate or directing groups, harsh reaction conditions, weak or acidic C-H bonds, or reagents containing specialized groups on the nitrogen atom. Among C-H bond amination reactions, those forming a C-N bond at a tertiary alkyl group would be particularly valuable, because this linkage is difficult to form from ketones or alcohols that might be created in a biosynthetic pathway by oxidation. Here we report a mild, selective, iron-catalysed azidation of tertiary C-H bonds that occurs without excess of the valuable substrate. The reaction tolerates aqueous environments and is suitable for the functionalization of complex structures in the late stages of a multistep synthesis. Moreover, this azidation makes it possible to install a range of nitrogen-based functional groups, including those from Huisgen 'click' cycloadditions and the Staudinger ligation. We anticipate that these reactions will create opportunities to modify natural products, their precursors and their derivatives to produce analogues that contain different polarity and charge as a

  6. Metal-catalysed azidation of tertiary C-H bonds suitable for late-stage functionalization

    NASA Astrophysics Data System (ADS)

    Sharma, Ankit; Hartwig, John F.

    2015-01-01

    Many enzymes oxidize unactivated aliphatic C-H bonds selectively to form alcohols; however, biological systems do not possess enzymes that catalyse the analogous aminations of C-H bonds. The absence of such enzymes limits the discovery of potential medicinal candidates because nitrogen-containing groups are crucial to the biological activity of therapeutic agents and clinically useful natural products. In one prominent example illustrating the importance of incorporating nitrogen-based functionality, the conversion of the ketone of erythromycin to the -N(Me)CH2- group in azithromycin leads to a compound that can be dosed once daily with a shorter treatment time. For such reasons, synthetic chemists have sought catalysts that directly convert C-H bonds to C-N bonds. Most currently used catalysts for C-H bond amination are ill suited to the intermolecular functionalization of complex molecules because they require excess substrate or directing groups, harsh reaction conditions, weak or acidic C-H bonds, or reagents containing specialized groups on the nitrogen atom. Among C-H bond amination reactions, those forming a C-N bond at a tertiary alkyl group would be particularly valuable, because this linkage is difficult to form from ketones or alcohols that might be created in a biosynthetic pathway by oxidation. Here we report a mild, selective, iron-catalysed azidation of tertiary C-H bonds that occurs without excess of the valuable substrate. The reaction tolerates aqueous environments and is suitable for the functionalization of complex structures in the late stages of a multistep synthesis. Moreover, this azidation makes it possible to install a range of nitrogen-based functional groups, including those from Huisgen `click' cycloadditions and the Staudinger ligation. We anticipate that these reactions will create opportunities to modify natural products, their precursors and their derivatives to produce analogues that contain different polarity and charge as a

  7. The Synthesis and Properties of Solution Processable a Red Phosphorescent Iridium(III) Complex with Alkyl Group.

    PubMed

    Yang, B N; Shin, D M

    2016-03-01

    The (TMP-HT)2Ir(acac) was synthesized with 2-bromo-4-(trifluoromethyl)pyridine and 5-hexyl-2-thiopheneboronic acid pinacol ester for organic light-emitting diodes (OLEDs). This material was designed on the basis of Gaussian modeling program results. The ligands have both the electron donor and acceptor in a molecule. There are pyridyl group which decrease electron density and thiophene group which increase electron density. Therefore, it showed intramolecular charge transfer (ICT) property. For solution process, the ligand have a alkyl group which has hydrophobic property. The (TMP-HT)21r(acac) was synthesized by Suzuki coupling reaction and Nonoyama reaction. The (TMP-HT)21r(acac) emitted at approximately 600 nm. The device structures were ITO/PEDOT (500 Å)/TFB (170 Å)/PVK:PBD (40%): (TMPHT)21r(acac) (300 Å:10%)/BH:BD5% (150 Å)/L201(50 Å)/Liq(200 Å)/Al. Electroluminescent properties were observed with devices doped with various doping concentrations. PMID:27455692

  8. Palladium-catalysed norbornene-mediated C-H functionalization of arenes

    NASA Astrophysics Data System (ADS)

    Ye, Juntao; Lautens, Mark

    2015-11-01

    The Catellani reaction -- a palladium-catalysed C-H functionalization reaction mediated by norbornene -- was first reported in 1997. The capacity to functionalize both the ortho and ipso positions of aryl halides in a single transformation held great appeal. We reported an annulative Catellani reaction in 2000. Since then, our two groups have explored the synthetic utility of this reaction and dramatic progress has been made by a number of groups in the past five years. Whereas the original Catellani reaction uses Pd(0) catalysts, recent studies have shown that Pd(II) catalysts can be used in combination with norbornene to effect (1) direct 2-alkylation of indoles and pyrroles and (2) selective meta-C-H functionalization of arenes bearing commonly used ortho-directing groups, thereby opening new avenues for future research. We describe the most recent developments concerning the Pd-catalysed norbornene-mediated C-H functionalization of arenes, including applications in natural products synthesis. We outline challenges and future opportunities.

  9. KO(t)Bu-mediated synthesis of dimethylisoindolin-1-ones and dimethyl-5-phenylisoindolin-1-ones: selective C-C coupling of an unreactive tertiary sp3 C-H bond.

    PubMed

    Bhakuni, Bhagat Singh; Yadav, Abhimanyu; Kumar, Shailesh; Patel, Saket; Sharma, Shubham; Kumar, Sangit

    2014-04-01

    A new reaction for the synthesis of dimethylisoindolinones has been presented from 2-halo-N-isopropyl-N-alkylbenzamide substrates and KO(t)Bu by the selective C-C coupling of an unreactive tertiary sp(3) C-H bond. The reaction manifested an excellent selectivity toward a tertiary sp(3) C-H bond over primary or sec C-H bond. Moreover, biaryl C-C coupling along with alkyl-aryl C-C coupling can be achieved in one pot using dihalobenzamides for the synthesis of biaryl 5-phenylisoindolin-1-ones. It seems that the reaction proceeds via a radical pathway in which the aryl radical translocates via 1,5-hydrogen atom transfer (HAT), forming a tertiary alkyl carbon-centered radical. The generated tertiary alkyl radical could attack the benzamide ring in a 5-exo/endo-trig manner followed by the release of an electron and a proton, leading to a five-membered isoindolinone ring. HAT seems to be responsible for the selective functionalization of the tertiary alkyl group over primary and secondary C-H bonds.

  10. Nickel-Catalyzed C-H Chalcogenation of Anilines.

    PubMed

    Müller, Thomas; Ackermann, Lutz

    2016-09-26

    The C-H thiolation of aniline derivatives was accomplished with a versatile nickel(II) catalyst under ligand-free conditions. The robust nature of the nickel catalysis system was reflected by the C-H thiolation with a good functional group tolerance and an ample scope, employing anilines possessing removable directing groups. The widely applicable nickel catalyst also allowed for aniline C-H selenylations, while mechanistic studies provided strong support that the rate-determining step is the C-H activation. PMID:27501081

  11. A quantitative structure activity/dose response relationship for contact allergic potential of alkyl group transfer agents.

    PubMed

    Roberts, D W; Basketter, D A

    1990-11-01

    As part of the investigation of structure activity relationships in contact allergy, it has been shown that methyl transfer agents are capable of acting as skin sensitizers. This work has now been extended to a more general examination of alkyl transfer reactions. The modified single injection adjuvant test has been used to investigate the sensitization potential of C12, C16 and unsaturated C18 alkyl transfer agents. Dose responses to challenge and the patterns of cross-reactivity between these materials and methyl transfer agents have been studied. All alkyl transfer agents examined were potent sensitizers in the guinea pig. There was evidence of mutual cross-reactivity between all alkyl transfer agents examined (including methyl transfer agents). Analysis of the data in terms of a modified relative alkylation index showed evidence of an overload effect. The sensitization data has been accurately modelled using a mathematical equation. These results emphasize the possibilities for relating physicochemical parameters and skin sensitization potential. Further studies with alkyl transfer agents are in progress of amplify the observations and conclusions presented in this report. No in vitro model is available for the prediction of skin sensitization potential. Therefore an approach based on a model using physicochemical criteria is the most likely route to a reduced requirement for animal testing. PMID:1965716

  12. Dehydrocyclization of peripheral alkyl groups in porphyrins at Cu(100) and Ag(111) surfaces

    NASA Astrophysics Data System (ADS)

    Williams, Christopher G.; Wang, Miao; Skomski, Daniel; Tempas, Christopher D.; Kesmodel, Larry L.; Tait, Steven L.

    2016-11-01

    The self-assembly of organic and metal-organic species at metal surfaces is a topic of high interest for applications that can benefit from tunable surface functionalization through organic building block design. As the complexity of molecular building blocks increases to direct ordering and function, thermal stability of the adsorbate often increases opening up new surface-catalyzed reaction pathways. We report dehydrocyclization of octaethylporphyrin to tetrabenzoporphyrin on the Cu(100) and Ag(111) surfaces at 500-600 K. Dehydrocyclization of smaller species is not typically observed on these surfaces at low pressure due to short adsorption lifetimes. The dehydrocyclization of peripheral ethyl groups forms benzo groups which then undergo additional dehydrogenation. The reaction products are characterized by high resolution electron energy loss spectroscopy (HREELS), scanning tunneling microscopy (STM), and X-ray photoelectron spectroscopy (XPS). These results extend our understanding of reaction pathways that may be encountered as molecular building blocks increase in size and complexity on relatively inert surfaces.

  13. Probing the effects of the ester functional group, alkyl side chain length and anions on the bulk nanostructure of ionic liquids: a computational study.

    PubMed

    Fakhraee, Mostafa; Gholami, Mohammad Reza

    2016-04-14

    The effects of ester addition on nanostructural properties of biodegradable ILs composed of 1-alkoxycarbonyl-3-alkyl-imidazolium cations ([C1COOCnC1im](+), n = 1, 2, 4) combined with [Br](-), [NO3](-), [BF4](-), [PF6](-), [TfO](-), and [Tf2N](-) were explored by using the molecular dynamics (MD) simulations and quantum theory of atoms in molecules (QTAIM) analysis at 400 K. Various thermodynamic properties of these ILs were extensively computed in our earlier work (Ind. Eng. Chem. Res., 2015, 54, 11678-11700). Nano-scale segregation analysis demonstrates the formation of a small spherical island-like hydrocarbon within the continuous ionic domain for ILs with short alkyl side chain ([C1COOC1C1im]), and a sponge-like nanostructure for the compound with long alkyl side chain ([C1COOC4C1im]). Ester-functionalized ILs with ethyl side chain ([C1COOC2C1im]) are the turning point between two different morphologies. Non-polar channels were observed for [C1COOC4C1im] ILs composed of smaller anions such as [Br] and [NO3], whereas clustering organization was found for the other anions. Formation of the spherical micelle-like nanostructure was seen for lengthened cations. Finally, the incorporation of an ester group into the alkyl side chain of the cation leads to stronger segregation between charged and uncharged networks, which consequently increased the possibility of self-assembly and micelle formation. PMID:27001746

  14. Cobalt-Catalyzed Oxidative C-H/C-H Cross-Coupling between Two Heteroarenes.

    PubMed

    Tan, Guangying; He, Shuang; Huang, Xiaolei; Liao, Xingrong; Cheng, Yangyang; You, Jingsong

    2016-08-22

    The first example of cobalt-catalyzed oxidative C-H/C-H cross-coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)2 ⋅4 H2 O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag2 CO3 oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C-H bond activation pathway that the well-described oxidative C-H/C-H cross-coupling reactions between two heteroarenes typically undergo. PMID:27460406

  15. Cobalt-Catalyzed Oxidative C-H/C-H Cross-Coupling between Two Heteroarenes.

    PubMed

    Tan, Guangying; He, Shuang; Huang, Xiaolei; Liao, Xingrong; Cheng, Yangyang; You, Jingsong

    2016-08-22

    The first example of cobalt-catalyzed oxidative C-H/C-H cross-coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)2 ⋅4 H2 O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag2 CO3 oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C-H bond activation pathway that the well-described oxidative C-H/C-H cross-coupling reactions between two heteroarenes typically undergo.

  16. Electrical conductivity and glass formation in nitrile-functionalized pyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids: chain length and odd-even effects of the alkyl spacer between the pyrrolidinium ring and the nitrile group.

    PubMed

    Leys, Jan; Tripathi, Chandra Shekhar Pati; Glorieux, Christ; Zahn, Stefan; Kirchner, Barbara; Longuemart, Stéphane; Lethesh, Kallidanthiyil Chellappan; Nockemann, Peter; Dehaen, Wim; Binnemans, Koen

    2014-06-14

    The electrical conductivity of a series of pyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids, functionalized with a nitrile (cyano) group at the end of an alkyl chain attached to the cation, was studied in the temperature range between 173 K and 393 K. The glass formation of the ionic liquids is influenced by the length of the alkyl spacer separating the nitrile function from the pyrrolidinium ring. The electrical conductivity and the viscosity do not show a monotonic dependence on the alkyl spacer length, but rather an odd-even effect. An explanation for this behavior is given, including the potential energy landscape picture for the glass transition.

  17. Direct Functionalization of Nitrogen Heterocycles via Rh-Catalyzed C-H Bond Activation

    SciTech Connect

    Lewis, Jared; Bergman, Robert; Ellman, Jonathan

    2008-02-04

    Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct funtionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes their work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. They initially discovered an intramolecular Rh-catalyzed C-2-alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. They then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, they discovered that a novel substrate-derived Rh-N-heterocyclic carbene (NHC) complex was involved as an intermediate. They then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy{sub 3}){sub 2}] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazolein, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy{sub 3}){sub 2} fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid co-catalysts accelerate the alkylation, they developed conditions that efficiently and intermolecularly alkylate a variety of

  18. Direct functionalization of nitrogen heterocycles via Rh-catalyzed C-H bond activation.

    PubMed

    Lewis, Jared C; Bergman, Robert G; Ellman, Jonathan A

    2008-08-01

    [Reaction: see text]. Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct functionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes our work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. We initially discovered an intramolecular Rh-catalyzed C-2 alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. We then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, we discovered that a novel substrate-derived Rh- N-heterocyclic carbene (NHC) complex was involved as an intermediate. We then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy 3)2] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazoline, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy 3) 2 fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid cocatalysts accelerate the alkylation, we developed conditions that efficiently and intermolecularly alkylate a variety of

  19. Unique regioselectivity in the C(sp3)-H α-alkylation of amines: the benzoxazole moiety as a removable directing group.

    PubMed

    Lahm, Günther; Opatz, Till

    2014-08-15

    The benzoxazol-2-yl- substituent was found to act as a removable activating and directing group in the Ir-catalyzed alkylation of C(sp(3))-H bonds adjacent to nitrogen in secondary amines. It can be easily introduced by oxidative coupling or by an SNAr reaction, and it can be removed by hydroxide or by hydride reduction. For 1,2,3,4-tetrahydroisoquinolines, activation exclusively takes place in the 3-position. A variety of activated as well as unactivated terminal olefins are suitable reaction partners.

  20. Intramolecular C-H activation reactions of molybdenacyclobutanes.

    PubMed

    Graham, Peter M; Buschhaus, Miriam S A; Legzdins, Peter

    2006-07-19

    Molybdenacyclobutane complexes can be prepared by reaction of Cp*Mo(NO)(=CHCMe3) (formed spontaneously by loss of neopentane from Cp*Mo(NO)(CH2CMe3)2 (1) under ambient conditions) with cyclic olefins, including cyclopentene, cycloheptene, and cyclooctene. The cyclopentene metallacyclobutane orients the metallacycle bridgehead protons cis to each other. A trans arrangement is observed for the cyclooctene congener, and both cis and trans orientations occur for the cycloheptene species. The reaction of 1 with cyclohexene initially forms a metallacyclobutane that then undergoes an allylic C-H activation to form an allyl-alkyl-coupled product with the concomitant loss of H2. The analogous allyl-alkyl structure is also observed as the thermodynamic product for the reactions of cycloheptene and cyclooctene with 1. The cyclooctene allyl-alkyl compound (5C) can be converted to an eta2-diene complex by heating with pyridine. Alternatively, heating of 5C in the presence of a variety of olefins displaces the diene ligand that can then be isolated in its unbound state.

  1. C-Alkylation by Hydrogen Autotransfer Reactions.

    PubMed

    Obora, Yasushi

    2016-04-01

    The development of practical, efficient, and atom-economical methods for the formation of carbon-carbon bonds remains a topic of considerable interest in current synthetic organic chemistry. In this review, we have summarized selected topics from the recent literature with particular emphasis on C-alkylation processes involving hydrogen transfer using alcohols as alkylation reagents. This review includes selected highlights concerning recent progress towards the modification of catalytic systems for the α-alkylation of ketones, nitriles, and esters. Furthermore, we have devoted a significant portion of this review to the methylation of ketones, alcohols, and indoles using methanol. Lastly, we have also documented recent advances in β-alkylation methods involving the dimerization of alcohols (Guerbet reaction), as well as new developments in C-alkylation methods based on sp (3) C-H activation. PMID:27573136

  2. Heterocycle Synthesis via Direct C-H/N-H Coupling

    PubMed Central

    Nadres, Enrico T.; Daugulis, Olafs

    2012-01-01

    A method for five- and six-membered heterocycle formation by palladium-catalyzed C-H/N-H coupling is presented. The method employs a picolinamide directing group, PhI(OAc)2 oxidant, and toluene solvent at 80–120 °C. Cyclization is effective for sp2 as well as aliphatic and benzylic sp3 C-H bonds. PMID:22206416

  3. Alkylating enzymes.

    PubMed

    Wessjohann, Ludger A; Keim, Jeanette; Weigel, Benjamin; Dippe, Martin

    2013-04-01

    Chemospecific and regiospecific modifications of natural products by methyl, prenyl, or C-glycosyl moieties are a challenging and cumbersome task in organic synthesis. Because of the availability of an increasing number of stable and selective transferases and cofactor regeneration processes, enzyme-assisted strategies turn out to be promising alternatives to classical synthesis. Two categories of alkylating enzymes become increasingly relevant for applications: firstly prenyltransferases and terpene synthases (including terpene cyclases), which are used in the production of terpenoids such as artemisinin, or meroterpenoids like alkylated phenolics and indoles, and secondly methyltransferases, which modify flavonoids and alkaloids to yield products with a specific methylation pattern such as 7-O-methylaromadendrin and scopolamine.

  4. Equilibrium Acidities and Homolytic Bond Dissociation Energies of Acidic C H Bonds in Alpha-Arylacetophenones and Related Compounds

    SciTech Connect

    Alnajjar, Mikhail S. ); Zhang, Xian-Man; Gleicher, Gerald J.; Truksa, Scott V.; Franz, James A. )

    2002-12-13

    The equilibrium acidities (pKAHs) and the oxidation potentials of the conjugate anions (Eox(A?{approx})s) were determined in dimethyl sulfoxide (DMSO) for eight ketones of the structure GCOCH3 and twenty of the structure RCOCH2G, (where R= alkyl, phenyl and G= alkyl, aryl). The homolytic bond dissociation energies (BDEs) for the acidic C H bonds of the ketones were estimated using the equation, BDEAH= 1.37pKAH+ 23.1Eox(A?{approx})+ 73.3. While the equilibrium acidities of GCOCH3 were found to be dependent on the remote substituent G, the BDE values for the C H bonds remained essentially invariant (93.5+ 0.5 kcal/mol). A linear correlation between pKAH values and (Eox(A?{approx})s) was found for the ketones. For RCOCH2G ketones, both pKAH and BDE values for the adjacent C-H bonds are sensitive to the nature of the substituent G. However, the steric bulk of the aryl group tends to exert a leveling effect on BDE's. The BDE of?p-9-anthracenylacetophenone is higher than that of??-2-anthracenylacetophenone by 3 kcal/mole, reflecting significant steric inhibition of resonance in the 9-substituted system. A range of 80.7 - 84.4 kcal/mole is observed for RCOCH2G ketones. The results are discussed in terms of solvation, steric, and resonance effects. Ab initio density functional theory (DFT) calculations are employed to illustrate the effect of steric interactions on radical and anion geometries. The DFT results parallel the trends in the experimental BDEs of??-arylacetophenones.

  5. Non-directed, carbonate-mediated C-H activation and aerobic C-H oxygenation with Cp*Ir catalysts.

    PubMed

    Kerr, M E; Ahmed, I; Gunay, A; Venditto, N J; Zhu, F; Ison, E A; Emmert, M H

    2016-06-14

    The effect of oxidatively stable L- and X-type additives on the activity of Cp*Ir catalyst precursors in the C-H activation of arenes has been studied. Turnover numbers for C-H activation of up to 65 can thus be achieved, as determined by H/D exchange in MeOH-D4. In particular, carbonate additives are found to enhance the C-H activation reactivity of Cp*Ir(H2O)3(OTf)2 () more significantly than L-type ligands investigated in this study. Based on these studies, Cp*Ir/carbonate systems are developed that catalyze the aerobic Csp(3)-H oxygenation of alkyl arenes, employing air as oxidant.

  6. Methods and Mechanisms for Cross-Electrophile Coupling of Csp(2) Halides with Alkyl Electrophiles.

    PubMed

    Weix, Daniel J

    2015-06-16

    Cross-electrophile coupling, the cross-coupling of two different electrophiles, avoids the need for preformed carbon nucleophiles, but development of general methods has lagged behind cross-coupling and C-H functionalization. A central reason for this slow development is the challenge of selectively coupling two substrates that are alike in reactivity. This Account describes the discovery of generally cross-selective reactions of aryl halides and acyl halides with alkyl halides, the mechanistic studies that illuminated the underlying principles of these reactions, and the use of these fundamental principles in the rational design of new cross-electrophile coupling reactions. Although the coupling of two different electrophiles under reducing conditions often leads primarily to symmetric dimers, the subtle differences in reactivity of aryl halides and alkyl halides with nickel catalysts allowed for generally cross-selective coupling reactions. These conditions could also be extended to the coupling of acyl halides with alkyl halides. These reactions are exceptionally functional group tolerant and can be assembled on the benchtop. A combination of stoichiometric and catalytic studies on the mechanism of these reactions revealed an unusual radical-chain mechanism and suggests that selectivity arises from (1) the preference of nickel(0) for oxidative addition to aryl halides and acyl halides over alkyl halides and (2) the greater propensity of alkyl halides to form free radicals. Bipyridine-ligated arylnickel intermediates react with alkyl radicals to efficiently form, after reductive elimination, new C-C bonds. Finally, the resulting nickel(I) species is proposed to regenerate an alkyl radical to carry the chain. Examples of new reactions designed using these principles include carbonylative coupling of aryl halides with alkyl halides to form ketones, arylation of epoxides to form β-aryl alcohols, and coupling of benzyl sulfonate esters with aryl halides to form

  7. Study of adjuvant effect of model surfactants from the groups of alkyl sulfates, alkylbenzene sulfonates, alcohol ethoxylates and soaps.

    PubMed

    Clausen, S K; Sobhani, S; Poulsen, O M; Poulsen, L K; Nielsen, G D

    2000-11-01

    The sodium salts of representatives of anionic surfactants, dodecylbenzene sulfonate (SDBS), dodecyl sulfate (SDS) and coconut oil fatty acids, and a nonionic surfactant, dodecyl alcohol ethoxylate, were studied for adjuvant effect on the production of specific IgE antibodies in mice. The surfactants were injected subcutaneously (sc) in concentrations of 1000, 100, 10 or 1 mg/l, respectively, together with 1 microg of ovalbumin (OVA). In addition, groups of mice received OVA in saline (control group) or in Al(OH)(3) (positive adjuvant control group). After the primary immunization the mice were boosted up to three times with OVA (0.1 microg sc) in saline. OVA-specific IgE antibodies were determined by the heterologous mouse rat passive cutaneous anaphylaxis test. The results were confirmed by a specific ELISA method. After the first booster, the Al(OH)(3) group and the 10 mg/l SDS group showed a statistically significant increase in OVA specific IgE levels. After two boosters, a statistically significant suppression in OVA-specific IgE production occurred with SDS (1000 mg/l), SDBS (1000 and 100 mg/l), coconut soap (1000 mg/l) and the alcohol ethoxylate (10 mg/l). This study suggests that a limited number of surfactants possess an adjuvant effect whereas all surfactants at certain levels can suppress specific IgE production.

  8. Palladium-Catalyzed Arylation of Alkyl Sulfenate Anions.

    PubMed

    Jia, Tiezheng; Zhang, Mengnan; Jiang, Hui; Wang, Carol Y; Walsh, Patrick J

    2015-11-01

    A unique palladium-catalyzed arylation of alkyl sulfenate anions is introduced that affords aryl alkyl sulfoxides in high yields. Due to the base sensitivity of the starting sulfoxides, sulfenate anion intermediates, and alkyl aryl sulfoxide products, the use of a mild method to generate alkyl sulfenate anions was crucial to the success of this process. Thus, a fluoride triggered elimination strategy was employed with alkyl 2-(trimethylsilyl)ethyl sulfoxides to liberate the requisite alkyl sulfenate anion intermediates. In the presence of palladium catalysts with bulky monodentate phosphines (SPhos and Cy-CarPhos) and aryl bromides or chlorides, alkyl sulfenate anions were readily arylated. Moreover, the thermal fragmentation and the base promoted elimination of alkyl sulfoxides was overridden. The alkyl sulfenate anion arylation exhibited excellent chemoselectivity in the presence of functional groups, such as anilines and phenols, which are also known to undergo palladium catalyzed arylation reactions.

  9. The C-H Stretching Features at 3.2--3.5 μm of Polycyclic Aromatic Hydrocarbons with Aliphatic Sidegroups

    NASA Astrophysics Data System (ADS)

    Yang, X. J.; Li, Aigen; Glaser, R.; Zhong, J. X.

    2016-07-01

    The so-called “unidentified” infrared emission (UIE) features at 3.3, 6.2, 7.7, 8.6, and 11.3 μm are ubiquitously seen in a wide variety of astrophysical regions. The UIE features are characteristic of the stretching and bending vibrations of aromatic hydrocarbon materials, e.g., polycyclic aromatic hydrocarbon (PAH) molecules. The 3.3 μm aromatic C-H stretching feature is often accompanied by a weaker feature at 3.4 μm. The latter is generally thought to result from the C-H stretch of aliphatic groups attached to the aromatic systems. The ratio of the observed intensity of the 3.3 μm aromatic C-H feature to that of the 3.4 μm aliphatic C-H feature allows one to estimate the aliphatic fraction of the UIE carriers, provided that the intrinsic oscillator strengths of the 3.3 μm aromatic C-H stretch ({A}3.3) and the 3.4 μm aliphatic C-H stretch ({A}3.4) are known. While previous studies on the aliphatic fraction of the UIE carriers were mostly based on the {A}3.4/{A}3.3 ratios derived from the mono-methyl derivatives of small PAH molecules, in this work we employ density functional theory to compute the infrared vibrational spectra of PAH molecules with a wide range of sidegroups including ethyl, propyl, butyl, and several unsaturated alkyl chains, as well as all the isomers of dimethyl-substituted pyrene. We find that, except for PAHs with unsaturated alkyl chains, the corresponding {A}3.4/{A}3.3 ratios are close to that of mono-methyl PAHs. This confirms the predominantly aromatic nature of the UIE carriers previously inferred from the {A}3.4/{A}3.3 ratio derived from mono-methyl PAHs.

  10. Alkyl chlorido hydridotris(3,5-dimethylpyrazolyl)borate imido niobium and tantalum(V) complexes: synthesis, conformational states of alkyl groups in solid and solution, X-ray diffraction and multinuclear magnetic resonance spectroscopy studies.

    PubMed

    Galájov, Miguel; García, Carlos; Gómez, Manuel; Gómez-Sal, Pilar

    2014-04-21

    The alkylation of the starting pseudooctahedral dichlorido imido hydridotris(3,5-dimethylpyrazolyl)borate niobium and tantalum(v) compounds [MTp*Cl2(NtBu)] (M = Nb,Ta; Tp* = BH(3,5-Me2C3HN2)3) with MgClR in different conditions led to new alkyl chlorido imido derivatives [MTp*ClR(NtBu)] (M = Nb/Ta, R = CH2CH31a/1b, CH2Ph 2a/2b, CH2tBu 3a/3b, CH2SiMe34a/4b, CH2CMe2Ph 5a/5b), whereas the dimethyl derivatives [MTp*Me2(NtBu)] (M = Nb 6a, Ta 6b) could be isolated as unitary species when the reaction was carried out using 2 equivalents of the magnesium reagent MgClMe. However, the chlorido methyl [MTp*ClMe(NtBu)] (M = Nb 7a, Ta 7b) complexes were obtained by heating at 50 °C the dichlorido and dimethyl imido complexes mixtures in a 1 : 1 ratio. All of the complexes were studied by multinuclear magnetic resonance spectroscopy and the molecular structures of 1b, 2a/b, 3a/b, 4a and 5a/b were determined by X-ray diffraction methods. In the solid state the complexes 1b, 4a and 5a exhibit only a gauche-anti conformation and the complexes 2a/b, 3a/b and 5b exhibit only a gauche-syn conformation of the alkyl substituents, whereas both conformational states, which do not show mutual exchange in the NMR time scale, were observed for 3a/b in a benzene-d6 solution. The (15)N chemical shifts of the complexes 1-7 are discussed.

  11. Effect of Alkyl Group on MxOy(-) + ROH (M = Mo, W; R = Me, Et) Reaction Rates.

    PubMed

    Ray, Manisha; Waller, Sarah E; Jarrold, Caroline Chick

    2016-03-10

    A systematic comparison of MxOy(-) + ROH (M = Mo vs W; R = Me vs Et) reaction rate coefficients and product distributions combined with results of calculations on weakly bound MxOy(-)·ROH complexes suggest that the overall reaction mechanism has three distinct steps, consistent with recently reported results on analogous MxOy(-) + H2O reactivity studies. MxOy(-) + ROH → MxOy+1(-) + RH oxidation reactions are observed for the least oxidized clusters, and MxOy(-) + ROH → MxOyROH(-) addition reactions are observed for clusters in intermediate oxidation states, as observed previously in MxOy(-) + H2O reactions. The first step is weakly bound complex formation, the rate of which is governed by the relative stability of the MxOy(-)·ROH charge-dipole complexes and the Lewis acid-base complexes. Calculations predict that MoxOy(-) clusters form more stable Lewis acid-base complexes than WxOy(-), and the stability of EtOH complexes is enhanced relative to MeOH. Consistent with this result, MoxOy(-) + ROH rate coefficients are higher than analogous WxOy(-) clusters. Rate coefficients range from 2.7 × 10(-13) cm(3) s(-1) for W3O8(-) + MeOH to 3.4 × 10(-11) cm(3) s(-1) for Mo2O4(-) + EtOH. Second, a covalently bound complex is formed, and anion photoelectron spectra of the several MxOyROH(-) addition products observed are consistent with hydroxyl-alkoxy structures that are formed readily from the Lewis acid-base complexes. Calculations indicate that addition products are trapped intermediates in the MxOy(-) + ROH → MxOy+1(-) + RH reaction, and the third step is rearrangement of the hydroxyl group to a metal hydride group to facilitate RH release. Trapped intermediates are more prevalent in MoxOy(-) reaction product distributions, indicating that the rate of this step is higher for WxOy+1RH(-) than for MoxOy+1RH(-). This result is consistent with previous computational studies on analogous MxOy(-) + H2O reactions predicting that barriers along the pathway in the

  12. Bis(alkyl) rare-earth complexes supported by a new tridentate amidinate ligand with a pendant diphenylphosphine oxide group. Synthesis, structures and catalytic activity in isoprene polymerization.

    PubMed

    Tolpygin, Aleksei O; Glukhova, Tatyana A; Cherkasov, Anton V; Fukin, Georgy K; Aleksanyan, Diana V; Cui, Dongmei; Trifonov, Alexander A

    2015-10-01

    A new tridentate amidine 2-[Ph2P(O)]C6H4NHC(tBu)[double bond, length as m-dash]N(2,6-Me2C6H3) (1) bearing a side chain pendant Ph2P[double bond, length as m-dash]O group was synthesized and proved to be a suitable ligand for coordination to rare-earths ions. Bis(alkyl) complexes {2-[Ph2P(O)]C6H4NC(tBu)N(2,6-Me2C6H3)}Ln(CH2SiMe3)2(THF)n (Ln = Y, n = 1 (3), Ln = Er, n = 1 (4), Ln = Lu, n = 0 (5)) were prepared using alkane elimination reactions of and Ln(CH2SiMe3)3(THF)2 (Ln = Y, Er, Lu) in hexane and were isolated in 50, 70 and 75% yields respectively. The X-ray studies revealed that complexes 2-5 feature intramolecular coordination of P[double bond, length as m-dash]O groups to metal ions. The lutetium complex 5 proved to be rather stable: at 20 °C its half-life time is 1155 h, while for the yttrium analogue the half-life time was found to be 63 h. Complexes 3-5 were evaluated as precatalysts for isoprene polymerization. The systems Ln/borate/AliBu3 (Ln = 3-5, borate = [PhNHMe2][B(C6F5)4], [Ph3C][B(C6F5)4]) turned out to be highly efficient in isoprene polymerization and enable complete conversion of 1000-10,000 equivalents of monomer into polymer at 20 °C within 0.5-2.5 h affording polyisoprenes with a very high content of 1,4-cis units (up to 96.6%) and from narrow (1.49) to moderate (3.54) polydispersities. A comparative study of catalytic performance of the related bis(alkyl) yttrium complexes supported by amidinate ligands of different denticities and structures [tBuC(N-2,6iPr2C6H4)2](-), [tBuC(N-2,6-iPr2C6H4)(N-2-MeOC6H4)](-) and {2-[Ph2P(O)]C6H4NC(tBu)N(2,6-Me2C6H3)}(-) demonstrated that the introduction of a pendant donor group (2-MeOC6H4 or Ph2P(O)) into a side chain of amidinate scaffolds results in a significant increase in catalytic activity. The amidinate ligand bearing a Ph2P(O)-group provides a high isoprene polymerization rate along with excellent control over regio- and stereoselectivities and allows us to obtain polyisoprenes with a reasonable

  13. Transition-metal-free direct alkylation of aryl tetrazoles via intermolecular oxidative C-N formation.

    PubMed

    Wang, Liang; Zhu, Kaiqiang; Chen, Qun; He, Mingyang

    2014-12-01

    A transition-metal-free synthetic approach for constructing alkylated aryl tetrazoles has been developed using n-Bu4NI as the catalyst and t-BuOOH as the oxidant. It involves the direct C-N bond formation through sp(3) C-H activation. A wide range of benzylic C-H substrates (or alkyl ethers) and aryl tetrazoles undergo this reaction smoothly to deliver the corresponding products in good yields.

  14. IONIC LIQUID-CATALYZED ALKYLATION OF ISOBUTANE WITH 2-BUTENE

    EPA Science Inventory

    A detailed study of the alkylation of isobutane with 2-butene in ionic liquid media has been conducted using 1-alkyl-3-methylimidazolium halides?aluminum chloride encompassing various alkyl groups (butyl-, hexyl-, and octyl-) and halides (Cl, Br, and I) on its cations and anions,...

  15. Mild Catalytic methods for Alkyl-Alkyl Bond Formation

    SciTech Connect

    Vicic, David A

    2009-08-10

    Overview of Research Goals and Accomplishments for the Period 07/01/06 – 06/30/07: Our overall research goal is to transform the rapidly emerging synthetic chemistry involving alkyl-alkyl cross-couplings into more of a mechanism-based field so that that new, rationally-designed catalysts can be performed under energy efficient conditions. Our specific objectives for the previous year were 1) to obtain a proper electronic description of an active catalyst for alkyl-alkyl cross-coupling reactions and 2) to determine the effect of ligand structure on the rate, scope, selectivity, and functional group compatibility of C(sp3)-C(sp3) cross-coupling catalysis. We have completed both of these initial objectives and established a firm base for further studies. The specific significant achievements of the current grant period include: 1) we have performed magnetic and computational studies on (terpyridine)NiMe, an active catalyst for alkyl-alkyl cross couplings, and have discovered that the unpaired electron resides heavily on the terpyridine ligand and that the proper electronic description of this nickel complex is a Ni(II)-methyl cation bound to a reduced terpyridine ligand; 2) we have for the first time shown that alkyl halide reduction by terpyridyl nickel catalysts is substantially ligand based; 3) we have shown by isotopic labeling studies that the active catalyst (terpyridine)NiMe is not produced via a mechanism that involves the formation of methyl radicals when (TMEDA)NiMe2 is used as the catalyst precursor; 4) we have performed an extensive ligand survey for the alkyl-alkyl cross-coupling reactions and have found that electronic factors only moderately influence reactivity in the terpyridine-based catalysis and that the most dramatic effects arise from steric and solubility factors; 5) we have found that the use of bis(dialkylphosphino)methanes as ligands for nickel does not produce active catalysts for cross-coupling but rather leads to bridging hydride

  16. Carbon stars with alpha-C:H emission

    NASA Technical Reports Server (NTRS)

    Gerbault, Florence; Goebel, John H.

    1989-01-01

    Many carbon stars in the IRS low resolution spectra (LRS) catalog were found which display emission spectra that compare favorable with the absorption spectrum of alpha-C:H. These stars have largely been classified as 4X in the LRS which has led to their interpretation by others in terms of displaying a mixture of the UIRF's 8.6 micron band and SiC at 11.5 microns. It was also found that many of these stars have a spectral upturn at 20+ microns which resembles the MgS band seen in carbon stars and planetary nebulae. It was concluded that this group of carbon stars will evolve into planetary nebulae like NGC 7027 and IC 418. In the presence of hard ultraviolet radiation the UIRF's will light up and be displayed as narrow emission bands on top of the broad alpha-C:H emission bands.

  17. Synthesis and chemistry of cationic d sup 0 metal alkyl complexes

    SciTech Connect

    Jordan, R.F.

    1991-01-01

    The objective of this project is to develop new types of electrophilic metal alkyl complexes for catalytic C-H activation and olefin polymerization chemistry, and associated fundamental mechanistic studies. We have focused our efforts on four classes of early metal alkyl complexes: (1) cationic group 4 Cp{sub 2}M(R){sup +} complexes (1) which are active species in Cp{sub 2}MX{sub 2}-based Ziegler-Natta olefin polymerization catalyst systems and which catalyze productive C-H activation reactions of heterocycles, (2) neutral (dicarbollide)(Cp*)M(R) complexes (2) which are structurally are electronically very similar to 1, (3) half-sandwich complexes CpM(R){sub 2}(L){sub n}{sup +} which are highly coordinatively and electronically unsaturated, and (4) new group 5 (dicarbollide)(Cp)MR{sub 2} and (dicarbollide){sub 2} MR complexes which are more unsaturated than group 5 Cp{sub 2}M systems due to incorporation of the dicarbollide ligand.

  18. Cu(OAc)2-catalyzed coupling of aromatic C-H bonds with arylboron reagents.

    PubMed

    Shang, Ming; Sun, Shang-Zheng; Dai, Hui-Xiong; Yu, Jin-Quan

    2014-11-01

    Cu-catalyzed coupling of aryl C-H bonds with arylboron reagents was accomplished using a readily removable directing group, which provides a useful method for the synthesis of biaryl compounds. The distinct transmetalation step in this Cu-catalyzed C-H coupling with aryl borons provides unique evidence for the formation of an aryl cupperate intermediate. PMID:25325402

  19. Palladium/copper-catalyzed oxidative C-H alkenylation/N-dealkylative carbonylation of tertiary anilines.

    PubMed

    Shi, Renyi; Lu, Lijun; Zhang, Hua; Chen, Borui; Sha, Yuchen; Liu, Chao; Lei, Aiwen

    2013-09-27

    C-H/C-N activation: The first palladium/copper-catalyzed aerobic oxidative C-H alkenylation/N-dealkylative carbonylation of tertiary anilines has been developed. Various functional groups were tolerated and acrylic ester could also be suitable substrates. This transformation provided efficient and straightforward synthesis of biologically active 3-methyleneindolin-2-one derivatives from cheap and simple substrates.

  20. Manganese Catalyzed C-H Halogenation.

    PubMed

    Liu, Wei; Groves, John T

    2015-06-16

    The remarkable aliphatic C-H hydroxylations catalyzed by the heme-containing enzyme, cytochrome P450, have attracted sustained attention for more than four decades. The effectiveness of P450 enzymes as highly selective biocatalysts for a wide range of oxygenation reactions of complex substrates has driven chemists to develop synthetic metalloporphyrin model compounds that mimic P450 reactivity. Among various known metalloporphyrins, manganese derivatives have received considerable attention since they have been shown to be versatile and powerful mediators for alkane hydroxylation and olefin epoxidation. Mechanistic studies have shown that the key intermediates of the manganese porphyrin-catalyzed oxygenation reactions include oxo- and dioxomanganese(V) species that transfer an oxygen atom to the substrate through a hydrogen abstraction/oxygen recombination pathway known as the oxygen rebound mechanism. Application of manganese porphyrins has been largely restricted to catalysis of oxygenation reactions until recently, however, due to ultrafast oxygen transfer rates. In this Account, we discuss recently developed carbon-halogen bond formation, including fluorination reactions catalyzed by manganese porphyrins and related salen species. We found that biphasic sodium hypochlorite/manganese porphyrin systems can efficiently and selectively convert even unactivated aliphatic C-H bonds to C-Cl bonds. An understanding of this novel reactivity derived from results obtained for the oxidation of the mechanistically diagnostic substrate and radical clock, norcarane. Significantly, the oxygen rebound rate in Mn-mediated hydroxylation is highly correlated with the nature of the trans-axial ligands bound to the manganese center (L-Mn(V)═O). Based on the ability of fluoride ion to decelerate the oxygen rebound step, we envisaged that a relatively long-lived substrate radical could be trapped by a Mn-F fluorine source, effecting carbon-fluorine bond formation. Indeed, this idea

  1. Anti-inflammatory activity of Arnica montana 6cH: preclinical study in animals.

    PubMed

    Macêdo, S B; Ferreira, L R; Perazzo, F F; Carvalho, J C

    2004-04-01

    The anti-inflammatory effect of Arnica montana 6cH was evaluated using acute and chronic inflammation models. In the acute, model, carrageenin-induced rat paw oedema, the group treated with Arnica montana 6cH showed 30% inhibition compared to control (P < 0.05). Treatment with Arnica 6cH, 30 min prior to carrageenin, did not produce any inhibition of the inflammatory process. In the chronic model, Nystatin-induced oedema, the group treated 3 days previously with Arnica montana 6cH had reduced inflammation 6 h after the inflammatory agent was applied (P < 0.05). When treatment was given 6 h after Nystatin treatment, there was no significant inhibitory effect. In a model based on histamine-induced increase of vascular permeability, pretreatment with Arnica montana 6cH blocked the action of histamine in increasing vascular permeability.

  2. Effect of donor strength of extended alkyl auxiliary groups on optoelectronic and charge transport properties of novel naphtha[2,1-b:6,5-b']difuran derivatives: simple yet effective strategy.

    PubMed

    Chaudhry, Aijaz Rasool; Ahmed, R; Irfan, Ahmad; Shaari, A; Isa, Ahmad Radzi Mat; Muhammad, Shabbir; Al-Sehemi, Abdullah G

    2015-08-01

    The present study spotlights the designing of new derivatives of 2,7-bis (4-octylphenyl) naphtho [2,1-b:6,5-b'] difuran (C8-DPNDF) by substituting the alkyl groups (methyl, ethyl, propyl, butyl, pentyl, hexyl, and heptyl groups) at para position. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods are employed to optimize the molecular structures in ground and first excited states, respectively. Several electro-optical properties including hole/electron reorganization energies (λh/λe), electron affinities (EAs), ionization potentials (IPs), molecular electrostatic potentials (MEP), and frontier molecular orbitals (FMOs) have been evaluated. Furthermore their transfer integrals and intrinsic mobilities values have also been calculated. From this study, it is found that hole mobility of octyl containing derivative is raised to 4.69 cm(2) V(-1) s(-1). Moreover with attaching octyl group, hole transfer integral values have also been enhanced in newly designed derivatives. The balanced hole and electron reorganization energies, and improved transfer integrals lead to enhanced mobility in derivatives with octyl group, highlighting them as an efficient hole transfer material. Unlike the other electro-optical properties, the intrinsic hole mobility has increased because of transfer integral values of octyl containing derivative C8-DPNDF due to the dense and close crystal packing of C8-DPNDF. However, photostability of furan-based materials has not changed by increasing length of extended alkyl chain. Thus our present investigation highlights the importance of alkyl auxiliary groups that are often neglected/replaced with simple methyl group to save computation costs. Graphical Abstract The hole and electron reorganization energies of naphtho[2,1-b:6,5-b']difuran derivatives.

  3. Approximate thermochemical tables for some C-H and C-H-O species

    NASA Technical Reports Server (NTRS)

    Bahn, G. S.

    1973-01-01

    Approximate thermochemical tables are presented for some C-H and C-H-O species and for some ionized species, supplementing the JANAF Thermochemical Tables for application to finite-chemical-kinetics calculations. The approximate tables were prepared by interpolation and extrapolation of limited available data, especially by interpolations over chemical families of species. Original estimations have been smoothed by use of a modification for the CDC-6600 computer of the Lewis Research Center PACl Program which was originally prepared for the IBM-7094 computer Summary graphs for various families show reasonably consistent curvefit values, anchored by properties of existing species in the JANAF tables.

  4. Direct C-H Trifluoromethylation of Glycals by Photoredox Catalysis.

    PubMed

    Wang, Bang; Xiong, De-Cai; Ye, Xin-Shan

    2015-11-20

    A mild, efficient, and practical transformation for the direct C-H trifluoromethylation of glycals under visible light has been reported for the first time. This reaction employed fac-Ir(3+)(ppy)3 as the photocatalyst, Umemoto's reagent as the CF3 source, and a household blue LED or sunlight as the light source. Glycals bearing both electron-withdrawing and -donating protective groups performed this reaction smoothly. This visible light-mediated trifluoromethylation reaction was highlighted by the trifluoromethylation of the biologically important Neu2en moiety. PMID:26562610

  5. Ion implantation induced modification of a-SiC : H

    NASA Astrophysics Data System (ADS)

    Tzenov, N.; Tzolov, M.; Dimova-Malinovska, D.; Tsvetkova, T.; Angelov, C.; Adriaenssens, G.; Pattyn, H.

    1994-02-01

    Optical transmission measurements have been carried out on thin a-SiC:H alloy films, implanted with ions of group IV elements. High doses of the order of 10 17 cm -2 have been used leading to a considerable shift of the absorption edge to lower photon energies. This shift may be attributed both to additional defect introduction and to accompanying formation of bonds between implanted ions and the atoms of the alloy, as confirmed by IR and Raman measurements. The observed chemical modification results from the high concentration of introduced atoms which is of the order of those for the host elements.

  6. Stereoselective alkoxycarbonylation of unactivated C(sp3)-H bonds with alkyl chloroformates via Pd(II)/Pd(IV) catalysis

    NASA Astrophysics Data System (ADS)

    Liao, Gang; Yin, Xue-Song; Chen, Kai; Zhang, Qi; Zhang, Shuo-Qing; Shi, Bing-Feng

    2016-09-01

    Several examples on Pd-catalysed carbonylation of methyl C(sp3)-H bonds with gaseous CO via Pd(II)/Pd(0) catalysis have been reported. However, methylene C(sp3)-H carbonylation remains a great challenge, largely due to the lack of reactivity of C-H bonds and the difficulty in CO migratory insertion. Herein, we report the stereoselective alkoxycarbonylation of both methyl and methylene C(sp3)-H bonds with alkyl chloroformates through a Pd(II)/Pd(IV) catalytic cycle. A broad range of aliphatic carboxamides and alkyl chloroformates are compatible with this protocol. In addition, this process is scalable and the directing group could be easily removed under mild conditions with complete retention of configuration.

  7. Transition-metal-catalyzed Chelation-assisted C-H Functionalization of Aromatic Substrates.

    PubMed

    Zhao, Binlin; Shi, Zhuangzhi; Yuan, Yu

    2016-04-01

    In the past decade, transition-metal-catalyzed C-H activations have been very popular in the research field of organometallic chemistry, and have been considered as efficient and convenient strategies to afford complex natural products, functional advanced materials, fluorescent compounds, and pharmaceutical compounds. In this account, we begin with a brief introduction to the development of transition-metal-catalyzed C-H activation, especially the development of transition-metal-catalyzed chelation-assisted C-H activation. Then, a more detailed discussion is directed towards our recent studies on the transition-metal-catalyzed chelation-assisted oxidative C-H/C-H functionalization of aromatic substrates bearing directing functional groups.

  8. Transition-metal-catalyzed Chelation-assisted C-H Functionalization of Aromatic Substrates.

    PubMed

    Zhao, Binlin; Shi, Zhuangzhi; Yuan, Yu

    2016-04-01

    In the past decade, transition-metal-catalyzed C-H activations have been very popular in the research field of organometallic chemistry, and have been considered as efficient and convenient strategies to afford complex natural products, functional advanced materials, fluorescent compounds, and pharmaceutical compounds. In this account, we begin with a brief introduction to the development of transition-metal-catalyzed C-H activation, especially the development of transition-metal-catalyzed chelation-assisted C-H activation. Then, a more detailed discussion is directed towards our recent studies on the transition-metal-catalyzed chelation-assisted oxidative C-H/C-H functionalization of aromatic substrates bearing directing functional groups. PMID:26968749

  9. Alkyl rearrangement processes in organozirconium complexes. Observation of internal alkyl complexes during hydrozirconation

    SciTech Connect

    Chirik, P.J.; Day, M.W.; Labinger, J.A.; Bercaw, J.E.

    1999-11-10

    Isotopically labeled alkyl zirconocene complexes of the form (CpR{sub n}){sub 2}Zr(CH{sub 2}CDR{sub 2}{prime})(X) (CpR{sub n} = alkyl-substituted cyclopentadienyl; R{prime} = H, alkyl group; X = H, D, Me) undergo isomerization of the alkyl ligand as well as exchange with free olefin in solution under ambient conditions. Increasing the substitution on the Cp ring results in slower isomerization reactions, but these steric effects are small. In contrast, changing X has a very large effect on the rate of isomerization. Pure {sigma}-bonding ligands such as methyl and hydride promote rapid isomerization, whereas {pi}-donor ligands inhibit {beta}-H elimination and hence alkyl isomerization. For ({eta}{sup 5}-C{sub 5}H{sub 5}){sub 2}Zr(R)(Cl), internal alkyl complexes have been observed for the first time. The rate of isomerization depends on the length of the alkyl group: longer alkyl chains (heptyl, hexyl) isomerize faster than shorter chains (butyl). The transient intermediate species have been identified by a combination of isotopic labeling and {sup 1}H, {sup 2}H, and {sup 13}C NMR experiments. The solid-state structure of the zirconocene cyclopentyl chloride complex, Cp{sub 2}Zr(cyclo-C{sub 5}H{sub 9})(Cl), has been determined by X-ray diffraction.

  10. Decarboxylative Alkyl-Alkyl Cross-Coupling Reactions.

    PubMed

    Konev, Mikhail O; Jarvo, Elizabeth R

    2016-09-12

    Alkyl with alkyl: A significant development in alkyl-alkyl cross-coupling reactions, namely the nickel-catalyzed decarboxylative Negishi coupling of N-hydroxyphthalimide esters, was recently reported by Baran and co-workers. This method enables the synthesis of various highly functionalized compounds, including natural product derivatives.

  11. Iron-Catalyzed C-H Functionalization Processes.

    PubMed

    Cera, Gianpiero; Ackermann, Lutz

    2016-10-01

    Iron-catalyzed C-H activation has recently emerged as an increasingly powerful tool for the step-economical transformation of unreactive C-H bonds. Particularly, the recent development of low-valent iron catalysis has set the stage for novel C-H activation strategies via chelation assistance. The low-cost, natural abundance, and low toxicity of iron prompted its very recent application in organometallic C-H activation catalysis. An overview of the use of iron catalysis in C-H activation processes is summarized herein up to May 2016. PMID:27573499

  12. Synthesis and chemistry of cationic d{sup 0} metal alkyl complexes. Progress report, July 1988--May 1991

    SciTech Connect

    Jordan, R.F.

    1991-12-31

    The objective of this project is to develop new types of electrophilic metal alkyl complexes for catalytic C-H activation and olefin polymerization chemistry, and associated fundamental mechanistic studies. We have focused our efforts on four classes of early metal alkyl complexes: (1) cationic group 4 Cp{sub 2}M(R){sup +} complexes (1) which are active species in Cp{sub 2}MX{sub 2}-based Ziegler-Natta olefin polymerization catalyst systems and which catalyze productive C-H activation reactions of heterocycles, (2) neutral (dicarbollide)(Cp*)M(R) complexes (2) which are structurally are electronically very similar to 1, (3) half-sandwich complexes CpM(R){sub 2}(L){sub n}{sup +} which are highly coordinatively and electronically unsaturated, and (4) new group 5 (dicarbollide)(Cp)MR{sub 2} and (dicarbollide){sub 2} MR complexes which are more unsaturated than group 5 Cp{sub 2}M systems due to incorporation of the dicarbollide ligand.

  13. Palladium-Catalyzed, Ring-Forming Aromatic C–H Alkylations with Unactivated Alkyl Halides

    PubMed Central

    Venning, Alexander R. O.; Bohan, Patrick T.; Alexanian, Erik J.

    2015-01-01

    A catalytic C–H alkylation using unactivated alkyl halides and a variety of arenes and heteroarenes is described. This ring-forming process is successful with a variety of unactivated primary and secondary alkyl halides, including those with β-hydrogens. In contrast to standard polar or radical cyclizations of aromatic systems, electronic activation of the substrate is not required. The mild, catalytic reaction conditions are highly functional group tolerant and facilitate access to a diverse range of synthetically and medicinally important carbocyclic and heterocyclic systems. PMID:25746442

  14. Scope and limitation of organocuprates, and copper or nickel catalyst-modified Grignard reagents for installation of an alkyl group onto cis-4-cyclopentene-1,3-diol monoacetate.

    PubMed

    Ito, M; Matsuumi, M; Murugesh, M G; Kobayashi, Y

    2001-08-24

    Alkylation of the title compound 1 was investigated with two types of reagents. One is a copper reagent derived from R(T)MgX (X = Cl, Br) and CuX (X = CN, I) and the other is R(T)MgX in the presence of a copper or a nickel catalyst. First, butylation was studied with BuCu(CN)(MgX), Bu(2)Cu(CN)(MgX)(2), BuMgX/CuCN (10 mol %), BuCu (derived from BuMgCl and CuI), and BuMgCl/CuI (10 mol %) in THF or Et(2)O. We found that trans 1,4-isomer 2a and/or trans 1,2-isomer 3a were produced exclusively with these reagents and that the stoichiometry of BuMgX/CuX and the choice of solvent were critical to attain high regioselectivity and efficient yield. Reaction with Bu(2)Cu(CN)(MgCl)(2) and BuMgCl/CuX (X = CN, I; 10 mol %) both in THF produced 2a with 93-94% regioselectivity in 87-92% yields. On the other hand, BuCu(CN)(MgX) in THF, Bu(2)Cu(CN)(MgX)(2) in Et(2)O, and BuMgX/CuCN (10 mol %) in Et(2)O furnished 3a in good yields with >90% selectively, irrespective of X of BuMgX. In the nickel-catalyzed butylation of 1 with BuMgCl, NiCl(2)(dppp) among NiCl(2)(tpp)(2), NiCl(2)(dppf), and NiCl(2)(dppp) furnished the best result to produce 2a. The CuCN-based protocol was then applied to other alkyl Grignard reagents, which include Me, Et, (CH(2))(3)Ph, c-C(6)H(11), (CH(2))(6)OMOM, (CH(2))(9)CH=CH(2), and CH(2)Ph as the alkyl group (R(T)). In addition, the Mitsunobu inversion of 2a and 3a afforded the corresponding cis isomers stereoselectively with AcOH as an acid at -78 degrees C in toluene for 2a and with 4-(NO(2))C(6)H(4)COOH in THF at r.t. for 3a. No racemization during the alkylation was confirmed by the reaction using (1R,3S)-1 (>99% ee) to produce (1S,4S)-2a and (1S,2S)-3a, respectively.

  15. From mutagenic to non-mutagenic nitroarenes: effect of bulky alkyl substituents on the mutagenic activity of nitroaromatics in Salmonella typhimurium. Part II. Substituents far away from the nitro group.

    PubMed

    Klein, M; Erdinger, L; Boche, G

    2000-04-13

    Derivatives of 4-nitrobiphenyl, 4-nitrosobiphenyl, 2-phenyl-5-nitropyridine (2-aza-4-nitrobiphenyl) and 2-nitrofluorene, bearing various alkyl substituents far away from the nitro group (4'-position in nitrobiphenyls, 7-position in 2-nitrofluorenes) were synthesised and tested for mutagenic potency in strains TA98 and TA100 of Salmonella typhimurium. In the absence of S9 in both strains, mutagenicity of all4'-Ad (Ad=adamantyl). Changes of the molecular shape from 'planar' to non-planar caused by the bulk of the introduced substituents (without influencing the twisting of the nitro substituent or the phenyl rings in the biphenyl compounds) may be responsible for this effect by interfering with an efficient intercalation into DNA.A comparison between experimental and theoretical values as calculated from recently developed equations (QSAR) confirmed our previous results (see the preceding paper) that mutagenicity of alkyl-substituted nitroaromatics cannot be predicted by hydrophobicity and LUMO-energies alone without including steric parameters. PMID:10771272

  16. Rh(III)-Catalyzed C-H Bond Addition/Amine-Mediated Cyclization of Bis-Michael Acceptors.

    PubMed

    Potter, Tyler J; Ellman, Jonathan A

    2016-08-01

    A Rh(III)-catalyzed C-H bond addition/primary amine-promoted cyclization of bis-Michael acceptors is reported. The C-H bond addition step occurs with high chemoselectivity, and the subsequent intramolecular Michael addition, mediated by a primary amine catalyst, sets three contiguous stereocenters with high diastereoselectivity. A broad range of directing groups and both aromatic and alkenyl C-H bonds were shown to be effective in this transformation, affording functionalized piperidines, tetrahydropyrans, and cyclohexanes.

  17. Inserting CO2 into Aryl C-H Bonds of Metal-Organic Frameworks: CO2 Utilization for Direct Heterogeneous C-H Activation.

    PubMed

    Gao, Wen-Yang; Wu, Haifan; Leng, Kunyue; Sun, Yinyong; Ma, Shengqian

    2016-04-25

    Described for the first time is that carbon dioxide (CO2 ) can be successfully inserted into aryl C-H bonds of the backbone of a metal-organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO2 for heterogeneous C-H activation and carboxylation reactions on MOFs, and opens a new avenue for CO2 chemical transformations under mild reaction conditions.

  18. DNA-directed alkylating ligands as potential antitumor agents: sequence specificity of alkylation by intercalating aniline mustards.

    PubMed

    Prakash, A S; Denny, W A; Gourdie, T A; Valu, K K; Woodgate, P D; Wakelin, L P

    1990-10-23

    The sequence preferences for alkylation of a series of novel parasubstituted aniline mustards linked to the DNA-intercalating chromophore 9-aminoacridine by an alkyl chain of variable length were studied by using procedures analogous to Maxam-Gilbert reactions. The compounds alkylate DNA at both guanine and adenine sites. For mustards linked to the acridine by a short alkyl chain through a para O- or S-link group, 5'-GT sequences are the most preferred sites at which N7-guanine alkylation occurs. For analogues with longer chain lengths, the preference of 5'-GT sequences diminishes in favor of N7-adenine alkylation at the complementary 5'-AC sequence. Magnesium ions are shown to selectively inhibit alkylation at the N7 of adenine (in the major groove) by these compounds but not the alkylation at the N3 of adenine (in the minor groove) by the antitumor antibiotic CC-1065. Effects of chromophore variation were also studied by using aniline mustards linked to quinazoline and sterically hindered tert-butyl-9-aminoacridine chromophores. The results demonstrate that in this series of DNA-directed mustards the noncovalent interactions of the carrier chromophores with DNA significantly modify the sequence selectivity of alkylation by the mustard. Relationships between the DNA alkylation patterns of these compounds and their biological activities are discussed.

  19. Anisotropic a-C:H from Compression of Polyacetylene

    NASA Astrophysics Data System (ADS)

    Bernasconi, M.; Parrinello, M.; Chiarotti, G. L.; Focher, P.; Tosatti, E.

    1996-03-01

    We have simulated the transformation of crystalline trans-polyacetylene into a-C:H under pressure by constant pressure ab initio molecular dynamics. Polyacetylene undergoes a gradual saturation of C-C bonds via chain interlinks, ending up at ~50 GPa with a-C:H containing 80% sp3 carbon atoms. The sp2-->sp3 conversion is irreversible and does not reverse by returning to zero pressure. The final a-C:H is a wide gap insulator and, at variance with the conventionally generated a-C:H, is highly anisotropic keeping some memory of the original polyacetylene chain axis.

  20. Double C-H functionalization in sequential order: direct synthesis of polycyclic compounds by a palladium-catalyzed C-H alkenylation-arylation cascade.

    PubMed

    Ohno, Hiroaki; Iuchi, Mutsumi; Kojima, Naoto; Yoshimitsu, Takehiko; Fujii, Nobutaka; Tanaka, Tetsuaki

    2012-04-23

    Palladium-catalyzed cascade C-H alkenylation and arylation provides convenient access to polycyclic aromatic compounds. Treatment of 3-bromoaniline derivatives bearing a bromocinnamyl group on the nitrogen atom with a catalytic amount of [Pd(OAc)(2)] and PCy(3)·HBF(4) in the presence of Cs(2)CO(3) in dioxane affords naphthalene-fused indole derivatives in good yields. This double cyclization reaction is also applicable to heterocyclic substrates, giving fused indoles containing a heteroaromatic ring such as dibenzofuran, dibenzothiophene, carbazole, indole, or benzofuran through heterocyclic C-H arylation. When using a 2,6-unsubstituted aniline derivative, the first C-H arylation preferentially proceeds at the more hindered position of the aniline ring.

  1. Diverse sp3 C-H functionalization through alcohol β-sulfonyloxylation

    NASA Astrophysics Data System (ADS)

    Xu, Yan; Yan, Guobing; Ren, Zhi; Dong, Guangbin

    2015-10-01

    Site-selective C-H functionalization has emerged as an attractive tool for derivatizing complex synthetic intermediates, but its use for late-stage diversification is limited by the functional groups that can be introduced, especially at unactivated sp3-hybridized positions. To overcome this, we introduce a strategy that directly installs a sulfonyloxy group at a β-C-H bond of a masked alcohol and subsequently employs nucleophilic substitution reactions to prepare various derivatives. Hydroxyl groups are widely found in bioactive molecules and are thus readily available as synthetic handles. A directing group is easily added (and subsequently removed) from the alcohols such that a formal site-selective β-C-H sulfonyloxylation of these alcohols is achieved. Substitution reactions with carbon, nitrogen, oxygen and other nucleophiles then lead to diverse functionalizations that may help to streamline the synthesis of complex analogues for drug discovery.

  2. The first report of polymerization and characterization of aniline bearing chiral alkyl group on ring via covalent bond; poly[(±)-2-(sec-butyl)aniline

    NASA Astrophysics Data System (ADS)

    Modarresi-Alam, Ali Reza; Amirazizi, Homeyra Alsadat; Movahedifar, Fahimeh; Farrokhzadeh, Abdolkarim; Asli, Gholam Reza; Nahavandi, Hamed

    2015-03-01

    A chiral alkyl substituted of polyaniline derivative, poly[(±)-2-(sec-butyl)aniline] was successfully synthesized by interfacial and conventional oxidative chemical polymerization. Both distilled and dark monomers (undistilled) were used in polymerization. The polymers were characterized in details by several techniques, proton nuclear magnetic resonance (1H NMR), carbon nuclear magnetic resonance (13C NMR), high resolution mass spectroscopy (HRMS), Fourier transform infrared (FT-IR), ultraviolet-visible (UV-vis) spectroscopy, elemental analysis (CHNS) and X-ray diffraction (XRD) as well as gel-permeation chromatography (GPC) and scanning electron microscopy (SEM) images. Conductivity of polymers was also measured. Spectroscopic studies have proved the formation of polymer and confirm the pernigraniline form of polyaniline. Mass spectra of polymers synthesized were studied exactly and prove the presence of both amine and iminium nitrogen as well as counter ions of Cl-, HSO4- and SO42-. Size of polymer particles is considerably smaller by interfacial polymerization. Polymers show semi-crystalline structure in XRD analysis. More crystalline structure and conductivity gained from interfacial polymerization. Molecular weights of polymers were lower in comparison with polyaniline according to GPC results. The effect of neutral salt (LiCl) was studied on molecular weight.

  3. C-H fluorination: U can fluorinate unactivated bonds

    NASA Astrophysics Data System (ADS)

    Neumann, Constanze N.; Ritter, Tobias

    2016-09-01

    Introducing C-F bonds into organic molecules is a challenging task, particularly through C-H activation methods. Now, a uranium-based photocatalyst turns traditional selectivity rules on their heads and fluorinates unfunctionalized alkane Csp3-H bonds, even in the presence of C-H bonds that are typically more reactive.

  4. Antioxidant activity of alkyl gallates and glycosyl alkyl gallates in fish oil in water emulsions: relevance of their surface active properties and of the type of emulsifier.

    PubMed

    González, María J; Medina, Isabel; Maldonado, Olivia S; Lucas, Ricardo; Morales, Juan C

    2015-09-15

    The antioxidant activity of gallic acid and a series of alkyl gallates (C4-C18) and glycosylated alkyl gallates (C4-C18) on fish oil-in-water emulsions was studied. Three types of emulsifiers, lecithin, Tween-20 and sodium dodecyl sulphate (SDS) were tested. A nonlinear behavior of the antioxidant activity of alkyl gallates when increasing alkyl chain length was observed for emulsions prepared with lecithin. Medium-size alkyl gallates (C6-C12) were the best antioxidants. In contrast, for emulsions prepared with Tween-20, the antioxidants seem to follow the polar paradox. Glucosyl alkyl gallates were shown previously to be better surfactants than alkyl gallates. Nevertheless, they exhibited a worse antioxidant capacity than their corresponding alkyl gallates, in emulsions prepared with lecithin or Tween-20, indicating the greater relevance of having three OH groups at the polar head in comparison with having improved surfactant properties but just a di-ortho phenolic structure in the antioxidant.

  5. Copper-catalyzed phosphorylation of sp(2) C-H bonds.

    PubMed

    Wang, Shan; Guo, Rui; Wang, Gao; Chen, Shan-Yong; Yu, Xiao-Qi

    2014-10-28

    The phosphorylation of the ortho C-H bonds in benzamides containing an 8-aminoquinoline moiety as a bidentate directing group with H-phosphonates using copper as a catalyst under mild temperature conditions is described. This method shows high functional group compatibility and selectively gives mono-substituted products. PMID:25204577

  6. Cp*Co(III)-Catalyzed Dehydrative C-H Allylation of 6-Arylpurines and Aromatic Amides Using Allyl Alcohols in Fluorinated Alcohols.

    PubMed

    Bunno, Youka; Murakami, Nanami; Suzuki, Yudai; Kanai, Motomu; Yoshino, Tatsuhiko; Matsunaga, Shigeki

    2016-05-01

    Cp*Co(III)-catalyzed C-H allylation of various aromatic C-H bonds using allyl alcohols as allylating reagents is described. Improved reaction conditions using fluorinated alcohol solvents afforded efficient directed C-H allylation of 6-arylpurines, benzamides, and a synthetically useful Weinreb amide with good functional group compatibility.

  7. Transition-metal-catalyzed C-N bond forming reactions using organic azides as the nitrogen source: a journey for the mild and versatile C-H amination.

    PubMed

    Shin, Kwangmin; Kim, Hyunwoo; Chang, Sukbok

    2015-04-21

    Owing to the prevalence of nitrogen-containing compounds in functional materials, natural products and important pharmaceutical agents, chemists have actively searched for the development of efficient and selective methodologies allowing for the facile construction of carbon-nitrogen bonds. While metal-catalyzed C-N cross-coupling reactions have been established as one of the most general protocols for C-N bond formation, these methods require starting materials equipped with functional groups such as (hetero)aryl halides or their equivalents, thus generating stoichiometric amounts of halide salts as byproducts. To address this aspect, a transition-metal-catalyzed direct C-H amination approach has emerged as a step- and atom-economical alternative to the conventional C-N cross-coupling reactions. However, despite the significant recent advances in metal-mediated direct C-H amination reactions, most available procedures need harsh conditions requiring stoichiometric external oxidants. In this context, we were curious to see whether a transition-metal-catalyzed mild C-H amination protocol could be achieved using organic azides as the amino source. We envisaged that a dual role of organic azides as an environmentally benign amino source and also as an internal oxidant via N-N2 bond cleavage would be key to develop efficient C-H amination reactions employing azides. An additional advantage of this approach was anticipated: that a sole byproduct is molecular nitrogen (N2) under the perspective catalytic conditions. This Account mainly describes our research efforts on the development of rhodium- and iridium-catalyzed direct C-H amination reactions with organic azides. Under our initially optimized Rh(III)-catalyzed amination conditions, not only sulfonyl azides but also aryl- and alkyl azides could be utilized as facile amino sources in reaction with various types of C(sp(2))-H bonds bearing such directing groups as pyridine, amide, or ketoxime. More recently, a new

  8. Hydrogen bond-like equatorial C-H⋯O interactions in aqueous 1,3-dioxane: A combined high-pressure infrared and Raman spectroscopy study

    NASA Astrophysics Data System (ADS)

    Chang, Hai-Chou; Jiang, Jyh-Chiang; Chuang, Ching-Wei; Lin, Jui-San; Lai, Wen-Wei; Yang, Yu-Chuan; Lin, Sheng Hsien

    2005-07-01

    Our results demonstrate that the equatorial C-H groups of 1,3-dioxane form hydrogen-bond-like C-H⋯O interactions more readily than do the axial C-H groups. The peak frequency of the strong axial C-H stretch band of 1,3-dioxane in a dilute D 2O solution possesses an unusual non-monotonic pressure dependence, which indicates enhanced C-H⋯O hydrogen bond formation at high pressure. We performed density functional theory calculations to predict the relative energies and total interaction energies of 1,3-dioxane/(water) n clusters and found that the equatorial C-H groups are more favorable sites for hydrogen bonding than are the axial C-H groups.

  9. New and extended parameterization of the thermodynamic model AIOMFAC: calculation of activity coefficients for organic-inorganic mixtures containing carboxyl, hydroxyl, carbonyl, ether, ester, alkenyl, alkyl, and aromatic functional groups

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Booth, A. M.; Lienhard, D. M.; Soonsin, V.; Krieger, U. K.; Topping, D. O.; McFiggans, G.; Peter, T.; Seinfeld, J. H.

    2011-05-01

    We present a new and considerably extended parameterization of the thermodynamic activity coefficient model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) at room temperature. AIOMFAC combines a Pitzer-like electrolyte solution model with a UNIFAC-based group-contribution approach and explicitly accounts for interactions between organic functional groups and inorganic ions. Such interactions constitute the salt-effect, may cause liquid-liquid phase separation, and affect the gas-particle partitioning of aerosols. The previous AIOMFAC version was parameterized for alkyl and hydroxyl functional groups of alcohols and polyols. With the goal to describe a wide variety of organic compounds found in atmospheric aerosols, we extend here the parameterization of AIOMFAC to include the functional groups carboxyl, hydroxyl, ketone, aldehyde, ether, ester, alkenyl, alkyl, aromatic carbon-alcohol, and aromatic hydrocarbon. Thermodynamic equilibrium data of organic-inorganic systems from the literature are critically assessed and complemented with new measurements to establish a comprehensive database. The database is used to determine simultaneously the AIOMFAC parameters describing interactions of organic functional groups with the ions H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42-. Detailed descriptions of different types of thermodynamic data, such as vapor-liquid, solid-liquid, and liquid-liquid equilibria, and their use for the model parameterization are provided. Issues regarding deficiencies of the database, types and uncertainties of experimental data, and limitations of the model, are discussed. The challenging parameter optimization problem is solved with a novel combination of powerful global minimization algorithms. A number of exemplary calculations for systems containing atmospherically relevant aerosol components are shown. Amongst others, we discuss aqueous mixtures of ammonium sulfate with

  10. New and extended parameterization of the thermodynamic model AIOMFAC: calculation of activity coefficients for organic-inorganic mixtures containing carboxyl, hydroxyl, carbonyl, ether, ester, alkenyl, alkyl, and aromatic functional groups

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Booth, A. M.; Lienhard, D. M.; Soonsin, V.; Krieger, U. K.; Topping, D. O.; McFiggans, G.; Peter, T.; Seinfeld, J. H.

    2011-09-01

    We present a new and considerably extended parameterization of the thermodynamic activity coefficient model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) at room temperature. AIOMFAC combines a Pitzer-like electrolyte solution model with a UNIFAC-based group-contribution approach and explicitly accounts for interactions between organic functional groups and inorganic ions. Such interactions constitute the salt-effect, may cause liquid-liquid phase separation, and affect the gas-particle partitioning of aerosols. The previous AIOMFAC version was parameterized for alkyl and hydroxyl functional groups of alcohols and polyols. With the goal to describe a wide variety of organic compounds found in atmospheric aerosols, we extend here the parameterization of AIOMFAC to include the functional groups carboxyl, hydroxyl, ketone, aldehyde, ether, ester, alkenyl, alkyl, aromatic carbon-alcohol, and aromatic hydrocarbon. Thermodynamic equilibrium data of organic-inorganic systems from the literature are critically assessed and complemented with new measurements to establish a comprehensive database. The database is used to determine simultaneously the AIOMFAC parameters describing interactions of organic functional groups with the ions H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42-. Detailed descriptions of different types of thermodynamic data, such as vapor-liquid, solid-liquid, and liquid-liquid equilibria, and their use for the model parameterization are provided. Issues regarding deficiencies of the database, types and uncertainties of experimental data, and limitations of the model, are discussed. The challenging parameter optimization problem is solved with a novel combination of powerful global minimization algorithms. A number of exemplary calculations for systems containing atmospherically relevant aerosol components are shown. Amongst others, we discuss aqueous mixtures of ammonium sulfate with

  11. alpha-C:H films for photonic structure fabrication

    NASA Astrophysics Data System (ADS)

    Kopustinskas, Vitoldas; Grigaliunas, Viktoras; Jucius, Dalius; Meskinis, Sarunas; Margelevicius, Mindaugas; Tomasiunas, Rolandas

    2001-03-01

    (alpha) -C:H films were applied to fabricate photonic band gap (PBG) structures in the silicon substrate by SF6N2-based reactive ion etching (RIE). The influence of RIE parameters on (alpha) C:H films structure and etching rate was investigated int his study. It is shown that RIE rate for (alpha) -C:H films changes from 26 nm/min to 38 nm/min with the integrated intensity ratios ID/IG varied from 0.65 to 1.1. It is evident that increase in etching rate is determined by increasing quantity of sp2 bonding in the synthesized (alpha) -C:H films. RIE does not change structure of the (alpha) -C:H masking films. However, non- uniform character of RIE takes place due to the non- homogeneous graphite clusters in (alpha) -C:H masking films. However, non-uniform character of RIE takes place due to the non-homogeneous graphite clusters in (alpha) -C:H masking films. By changing parameters of silicon etching, such as RF power density, pressure and negative bias voltage, anisotropy was varied in wide range and microstructures of different shape were obtained.

  12. Controlling site selectivity in palladium-catalyzed C-H bond functionalization.

    PubMed

    Neufeldt, Sharon R; Sanford, Melanie S

    2012-06-19

    Effective methodology to functionalize C-H bonds requires overcoming the key challenge of differentiating among the multitude of C-H bonds that are present in complex organic molecules. This Account focuses on our work over the past decade toward the development of site-selective Pd-catalyzed C-H functionalization reactions using the following approaches: substrate-based control over selectivity through the use of directing groups (approach 1), substrate control through the use of electronically activated substrates (approach 2), or catalyst-based control (approach 3). In our extensive exploration of the first approach, a number of selectivity trends have emerged for both sp(2) and sp(3) C-H functionalization reactions that hold true for a variety of transformations involving diverse directing groups. Functionalizations tend to occur at the less-hindered sp(2) C-H bond ortho to a directing group, at primary sp(3) C-H bonds that are β to a directing group, and, when multiple directing groups are present, at C-H sites proximal to the most basic directing group. Using approach 2, which exploits electronic biases within a substrate, our group has achieved C-2-selective arylation of indoles and pyrroles using diaryliodonium oxidants. The selectivity of these transformations is altered when the C-2 site of the heterocycle is blocked, leading to C-C bond formation at the C-3 position. While approach 3 (catalyst-based control) is still in its early stages of exploration, we have obtained exciting results demonstrating that site selectivity can be tuned by modifying the structure of the supporting ligands on the Pd catalyst. For example, by modulating the structure of N-N bidentate ligands, we have achieved exquisite levels of selectivity for arylation at the α site of naphthalene. Similarly, we have demonstrated that both the rate and site selectivity of arene acetoxylation depend on the ratio of pyridine (ligand) to Pd. Lastly, by switching the ligand on Pd from an

  13. Dielectric relaxation in hard, plasma-polymerized C:H films

    NASA Astrophysics Data System (ADS)

    Stundzia, V.; Biederman, H.; Slavínská, D.; Nedbal, J.; Hlídek, P.; Poskus, A.; Mackus, P. K.; Howson, R. P.

    2000-03-01

    The dielectric relaxation in hard, plasma-polymerized C:H films has been studied using the depolarization current method. These films were prepared by means of a dc unbalanced magnetron operated in a working gas mixture of Ar with n-hexane. The C:H films were sandwiched between two thin, aluminium-film electrodes. The measurements took place without breaking vacuum at temperatures ranging from 22 °C to 140 °C. The analysis of the respective depolarization currents was performed by means of the Kohlrausch-Williams-Watts depolarization function. Two dielectric relaxation processes were observed. The first is associated with high-dipole polar groups such as hydroxyl and carbonyl groups. The second relaxation process is observed only at the highest temperatures and cannot be explained in terms of permanent dipole reorientation. This finding shows that the C:H films are hard, highly crosslinked hydrocarbon plasma polymers.

  14. Syntheses and Transformations of α-Amino Acids via Palladium-Catalyzed Auxiliary-Directed sp(3) C-H Functionalization.

    PubMed

    He, Gang; Wang, Bo; Nack, William A; Chen, Gong

    2016-04-19

    α-Amino acids (αAA) are one of the most useful chiral building blocks for synthesis. There are numerous general strategies that have commonly been used for αAA synthesis, many of which employ de novo synthesis focused on enantioselective bond construction around the Cα center and others that consider conversion of existing αAA precursors carrying suitable functional groups on side chains (e.g., serine and aspartic acid). Despite significant advances in synthetic methodology, the efficient synthesis of enantiopure αAAs carrying complex side chains, as seen in numerous peptide natural products, remains challenging. Complementary to these "conventional" strategies, a strategy based on the selective functionalization of side chain C-H bonds, particularly sp(3) hybridized C-H bonds, of various readily available αAA precursors may provide a more straightforward and broadly applicable means for the synthesis and transformation of αAAs. However, many hurdles related to the low reactivity of C(sp(3))-H bonds and the difficulty of controlling selectivity must be overcome to realize the potential of C-H functionalization chemistry in this synthetic application. Over the past few years, we have carried out a systematic investigation of palladium-catalyzed bidentate auxiliary-directed C-H functionalization reactions for αAA substrates. Our strategies utilize two different types of amide-linked auxiliary groups, attached at the N or C terminus of αAA substrates, to exert complementary regio- and stereocontrol on C-H functionalization reactions through palladacycle intermediates. A variety of αAA precursors can undergo multiple modes of C(sp(3))-H functionalization, including arylation, alkenylation, alkynylation, alkylation, alkoxylation, and intramolecular aminations, at the β, γ, and even δ positions to form new αAA products with diverse structures. In addition to transforming αAAs at previously unreachable positions, these palladium-catalyzed C-H

  15. Pressurized liquid extraction using water/isopropanol coupled with solid-phase extraction cleanup for semivolatile organic compounds, polycyclic aromatic hydrocarbons (PAH), and alkylated PAH homolog groups in sediment

    USGS Publications Warehouse

    Burkhardt, M.R.; Zaugg, S.D.; Burbank, T.L.; Olson, M.C.; Iverson, J.L.

    2005-01-01

    Polycyclic aromatic hydrocarbons (PAH) are recognized as environmentally relevant for their potential adverse effects on human and ecosystem health. This paper describes a method to determine the distribution of PAH and alkylated homolog groups in sediment samples. Pressurized liquid extraction (PLE), coupled with solid-phase extraction (SPE) cleanup, was developed to decrease sample preparation time, to reduce solvent consumption, and to minimize background interferences for full-scan GC-MS analysis. Recoveries from spiked Ottawa sand, environmental stream sediment, and commercially available topsoil, fortified at 1.5-15 ??g per compound, averaged 94.6 ?? 7.8%, 90.7 ?? 5.8% and 92.8 ?? 12.8%, respectively. Initial method detection limits for single-component compounds ranged from 20 to 302 ??g/kg, based on 25 g samples. Results from 28 environmental sediment samples, excluding homologs, show 35 of 41 compounds (85.4%) were detected in at least one sample with concentrations ranging from 20 to 100,000 ??g/kg. The most frequently detected compound, 2,6-dimethylnaphthalene, was detected in 23 of the 28 (82%) environmental samples with a concentration ranging from 15 to 907 ??g/kg. The results from the 28 environmental sediment samples for the homolog series showed that 27 of 28 (96%) samples had at least one homolog series present at concentrations ranging from 20 to 89,000 ??g/kg. The most frequently detected homolog series, C2-alkylated naphthalene, was detected in 26 of the 28 (93%) environmental samples with a concentration ranging from 25 to 3900 ??g/kg. Results for a standard reference material using dichloromethane Soxhlet-based extraction also are compared. ?? 2005 Elsevier B.V. All rights reserved.

  16. Nickel-Catalyzed Aromatic C-H Functionalization.

    PubMed

    Yamaguchi, Junichiro; Muto, Kei; Itami, Kenichiro

    2016-08-01

    Catalytic C-H functionalization using transition metals has received significant interest from organic chemists because it provides a new strategy to construct carbon-carbon bonds and carbon-heteroatom bonds in highly functionalized, complex molecules without pre-functionalization. Recently, inexpensive catalysts based on transition metals such as copper, iron, cobalt, and nickel have seen more use in the laboratory. This review describes recent progress in nickel-catalyzed aromatic C-H functionalization reactions classified by reaction types and reaction partners. Furthermore, some reaction mechanisms are described and cutting-edge syntheses of natural products and pharmaceuticals using nickel-catalyzed aromatic C-H functionalization are presented. PMID:27573407

  17. Radical C-H functionalization to construct heterocyclic compounds.

    PubMed

    Yu, Jin-Tao; Pan, Changduo

    2016-02-01

    Heterocyclic compounds are widely present in natural products, pharmaceuticals and bioactive molecules. Thus, organic and pharmaceutical chemists have been making extensive efforts to construct those heterocyclic frameworks through developing versatile and efficient synthetic strategies. The direct C-H functionalization via the radical pathway has emerged as a promising and dramatic approach towards heterocycles with high atom- and step-economy. Heterocyclic compounds such as coumarins, furans, benzofurans, xanthones, benzothiazoles, indoles, indolines, oxindoles, quinolines, isoquinolines, quinoxaline, and phenanthridines have been successfully synthesized by C-H functionalization through the radical pathway. In this review, recent advances on radical C-H functionalization to construct heterocyclic compounds are highlighted with discussions.

  18. Poly(ethyleneoxide) functionalization through alkylation

    DOEpatents

    Sivanandan, Kulandaivelu; Eitouni, Hany Basam; Li, Yan; Pratt, Russell Clayton

    2015-04-21

    A new and efficient method of functionalizing high molecular weight polymers through alkylation using a metal amide base is described. This novel procedure can also be used to synthesize polymer-based macro-initiators containing radical initiating groups at the chain-ends for synthesis of block copolymers.

  19. Solid-state 13C NMR study of banana liquid crystals - 3: Alkyl-tail-group packing environments of an acute-angle bent-core molecule in the hexagonal columnar and cubic phases

    NASA Astrophysics Data System (ADS)

    Kurosu, Hiromichi; Endo, Yumi; Kimura, Saori; Hashimoto, Tomoko; Harada, Motoi; Lee, Eun-Woo; Sone, Masato; Watanabe, Junji; Kang, Sungmin

    2016-02-01

    Solid-state 13C nuclear magnetic resonance (NMR) measurements were performed on the hexagonal columnar and cubic phases of an acute-angle banana-shaped molecule, N(1,7)-S30. In the hexagonal columnar phase, three peaks appear at the NMR chemical shifts assigned to the internal methylene carbons of alkyl tails, indicating that the two alkyl tails have different packing structures, and one of the tails has two different conformations within a single molecule. Combined cross-polarization/magic-angle spinning and pulse saturation transfer/magic-angle spinning measurements show that one of the alkyl chains is located inside and the other is located outside the columnar structure. In the cubic phase, pulse saturation transfer/magic-angle spinning measurement shows that only one peak appears at the NMR chemical shifts assigned to the internal methylene carbons of alkyl tails, indicating that both of the alkyl chains are located outside the cubic structure.

  20. Oxidative esterification via photocatalytic C-H activation

    EPA Science Inventory

    Direct oxidative esterification of alcohol via photocatalytic C-H activation has been developed using VO@g-C3N4 catalyst; an expeditious esterification of alcohols occurs under neutral conditions using visible light as the source of energy.

  1. Copper-catalyzed etherification of arene C-H bonds.

    PubMed

    Roane, James; Daugulis, Olafs

    2013-11-15

    A method for direct, auxiliary-assisted alkoxylation and phenoxylation of β-sp(2) C-H bonds of benzoic acid derivatives and γ-sp(2) C-H bonds of amine derivatives is reported. The reaction employs (CuOH)2CO3 catalyst, air as an oxidant, phenol or alcohol coupling partner, DMF, pyridine, or DMPU solvent, and K2CO3, tetramethylguanidine, or K3PO4 base at 70-130 °C. PMID:24180517

  2. Chelation-assisted Pd-catalysed ortho-selective oxidative C-H/C-H cross-coupling of aromatic carboxylic acids with arenes and intramolecular Friedel-Crafts acylation: one-pot formation of fluorenones.

    PubMed

    Sun, Denan; Li, Bijin; Lan, Jingbo; Huang, Quan; You, Jingsong

    2016-03-01

    Pd-Catalysed ortho-selective oxidative C-H/C-H cross-coupling of aromatic carboxylic acids with arenes and subsequent intramolecular Friedel-Crafts acylation has been accomplished for the first time through a chelation-assisted C-H activation strategy. Starting from the readily available substrates, a variety of fluorenone derivatives are obtained in one pot. The direct use of naturally occurring carboxylic acid functionalities as directing groups avoids unnecessary steps for installation and removal of an extra directing group.

  3. Chelation-assisted Pd-catalysed ortho-selective oxidative C-H/C-H cross-coupling of aromatic carboxylic acids with arenes and intramolecular Friedel-Crafts acylation: one-pot formation of fluorenones.

    PubMed

    Sun, Denan; Li, Bijin; Lan, Jingbo; Huang, Quan; You, Jingsong

    2016-03-01

    Pd-Catalysed ortho-selective oxidative C-H/C-H cross-coupling of aromatic carboxylic acids with arenes and subsequent intramolecular Friedel-Crafts acylation has been accomplished for the first time through a chelation-assisted C-H activation strategy. Starting from the readily available substrates, a variety of fluorenone derivatives are obtained in one pot. The direct use of naturally occurring carboxylic acid functionalities as directing groups avoids unnecessary steps for installation and removal of an extra directing group. PMID:26861768

  4. Transition metal activation and functionalization of C-H bonds. Progress report, June 1, 1983-May 31, 1986

    SciTech Connect

    Jones, W.D.

    1986-11-01

    This project has been directed towards the investigation of the fundamental thermodynamic and kinetic factors that influence carbon-hydrogen bond activation at homogeneous transition metal centers. The major accomplishments of this past three years have been: (1) to identify a new transition metal complex capable of activating both arene and alkane C-H bonds, (2) to quantitatively evaluate the stability of the hydrido aryl and hydrido alkyl complexes towards reductive elimination, (3) to measure the kinetic selectivity of the reactive intermediate towards alkane and arene C-H bonds, (4) to quantitatively determine the thermodynamics of alkane and arene oxidative addition, (5) to demonstrate that arenes are activated by way of formation of an eta/sup 2/-arene complex, (6) to quantitatively determine the kinetic and thermodynamic preference for intra vs intermolecular activation of arene and alkane C-H bonds, (7) to measure isotope effects for the oxidative addition/reductive elimination pathways as a means of confirming the proposed mechanism of reaction, and (8) to formulate a unified theory of C-H bond activation that applies to other transition metal complexes. The specific complexes involved in these studies are derivatives of the formulation (C/sub 5/Me/sub 5/)Rh(PMe/sub 3/)(R)H and (C/sub 5/Me/sub 5/)Rh(PMe/sub 2/R) (R)H.

  5. Cobalt-catalyzed chelation assisted C-H allylation of aromatic amides with unactivated olefins.

    PubMed

    Yamaguchi, Takuma; Kommagalla, Yadagiri; Aihara, Yoshinori; Chatani, Naoto

    2016-08-01

    The cobalt-catalyzed chelation assisted ortho C-H allylation of aromatic amides with unactivated aliphatic alkenes is reported. The reaction proceeds in air under mild reaction conditions, providing allylated products in good to excellent yields with high E-selectivities. This operationally simple method shows a high functional group tolerance.

  6. Cobalt(III)-Catalyzed C-H Bond Amidation with Isocyanates.

    PubMed

    Hummel, Joshua R; Ellman, Jonathan A

    2015-05-15

    The first examples of cobalt(III)-catalyzed C-H bond addition to isocyanates are described, providing a convergent strategy for arene and heteroarene amidation. Using a robust air- and moisture-stable catalyst, this transformation demonstrates a broad isocyanate scope and good functional-group compatibility and has been performed on gram scale.

  7. Late-stage diversification of biologically active pyridazinones via a direct C-H functionalization strategy.

    PubMed

    Li, Wei; Fan, Zhoulong; Geng, Kaijun; Xu, Youjun; Zhang, Ao

    2015-01-14

    Divergent C-H functionalization reactions (arylation, carboxylation, olefination, thiolation, acetoxylation, halogenation, naphthylation) using a pyridazinone moiety as an internal directing group were successfully established. This approach offers a late-stage, ortho-selective diversification of a biologically active pyridazinone scaffold. Seven series of novel pyridazinone analogues were synthesized conveniently as the synthetic precursors of potential sortase A (SrtA) inhibitors.

  8. Nickel-catalyzed synthesis of diarylsulfides and sulfones via C-H bond functionalization of arylamides.

    PubMed

    Reddy, Vutukuri Prakash; Qiu, Renhua; Iwasaki, Takanori; Kambe, Nobuaki

    2015-06-28

    The direct sulfenylation and sulfonylation of (sp(2))C-H bonds of benzamide derivatives were achieved using a Ni catalyst with the aid of an 8-aminoquinoline moiety as a bidentate directing group. These protocols represent a convenient route for the formation of valuable diaryl sulfides and sulfones in moderate to excellent yields. PMID:26006765

  9. Iron-Catalyzed Oxyfunctionalization of Aliphatic Amines at Remote Benzylic C-H Sites.

    PubMed

    Mbofana, Curren T; Chong, Eugene; Lawniczak, James; Sanford, Melanie S

    2016-09-01

    We report the development of an iron-catalyzed method for the selective oxyfunctionalization of benzylic C(sp(3))-H bonds in aliphatic amine substrates. This transformation is selective for benzylic C-H bonds that are remote (i.e., at least three carbons) from the amine functional group. High site selectivity is achieved by in situ protonation of the amine with trifluoroacetic acid, which deactivates more traditionally reactive C-H sites that are α to nitrogen. The scope and synthetic utility of this method are demonstrated via the synthesis and derivatization of a variety of amine-containing, biologically active molecules. PMID:27529646

  10. Transition metal-free intramolecular regioselective couplings of aliphatic and aromatic C-H bonds.

    PubMed

    Tian, Hua; Yang, Haijun; Zhu, Changjin; Fu, Hua

    2016-01-29

    Cross-dehydrogenative couplings of two different C-H bonds have emerged as an attractive goal in organic synthesis. However, achieving regioselective C-H activation is a great challenge because C-H bonds are ubiquitous in organic compounds. Actually, the regioselective couplings promoted by enzymes are a common occurrence in nature. Herein, we have developed simple, efficient and general transition metal-free intramolecular couplings of alphatic and aromatic C-H bonds. The protocol uses readily available aryl triazene as the radical initiator, cheap K2S2O8 as the oxidant, and the couplings were performed well with excellent tolerance of functional groups. Interestingly, α-carbon configuration of some amino acid residues in the substrates was kept after the reactions, and the couplings for substrates with substituted phenylalanine residues exhibited complete β-carbon diastereoselectivity for induction of the chiral α-carbon. Therefore, the present study should provide a novel strategy for regioselective cross-dehydrogenative couplings of two different C-H bonds.

  11. Transition metal-free intramolecular regioselective couplings of aliphatic and aromatic C-H bonds

    PubMed Central

    Tian, Hua; Yang, Haijun; Zhu, Changjin; Fu, Hua

    2016-01-01

    Cross-dehydrogenative couplings of two different C-H bonds have emerged as an attractive goal in organic synthesis. However, achieving regioselective C-H activation is a great challenge because C-H bonds are ubiquitous in organic compounds. Actually, the regioselective couplings promoted by enzymes are a common occurrence in nature. Herein, we have developed simple, efficient and general transition metal-free intramolecular couplings of alphatic and aromatic C-H bonds. The protocol uses readily available aryl triazene as the radical initiator, cheap K2S2O8 as the oxidant, and the couplings were performed well with excellent tolerance of functional groups. Interestingly, α-carbon configuration of some amino acid residues in the substrates was kept after the reactions, and the couplings for substrates with substituted phenylalanine residues exhibited complete β-carbon diastereoselectivity for induction of the chiral α-carbon. Therefore, the present study should provide a novel strategy for regioselective cross-dehydrogenative couplings of two different C-H bonds. PMID:26822836

  12. β-Alkyl Elimination: Fundamental Principles and Some Applications.

    PubMed

    O'Reilly, Matthew E; Dutta, Saikat; Veige, Adam S

    2016-07-27

    This review describes organometallic compounds and materials that are capable of mediating a rarely encountered but fundamentally important reaction: β-alkyl elimination at the metal-Cα-Cβ-R moiety, in which an alkyl group attached to the Cβ atom is transferred to the metal or to a coordinated substrate. The objectives of this review are to provide a cohesive fundamental understanding of β-alkyl-elimination reactions and to highlight its applications in olefin polymerization, alkane hydrogenolysis, depolymerization of branched polymers, ring-opening polymerization of cycloalkanes, and other useful organic reactions. To provide a coherent understanding of the β-alkyl elimination reaction, special attention is given to conditions and strategies used to facilitate β-alkyl-elimination/transfer events in metal-catalyzed olefin polymerization, which provide the well-studied examples.

  13. Synthesis of heterocyclic compounds through palladium-catalyzed C-H cyclization processes.

    PubMed

    Inamoto, Kiyofumi

    2013-01-01

    Herein, we describe our development of synthetic methods for heterocyclic compounds based on the palladium-catalyzed carbon-hydrogen bond (C-H) functionalization/intramolecular carbon-heteroatom (nitrogen or sulfur) bond formation process. By this C-H cyclization method, we efficiently prepared various N-heterocycles, including indazoles, indoles, and 2-quinolinones, as well as S-heterocycles such as benzothiazoles and benzo[b]thiophenes. Yields are typically good to high and good functional-group tolerance is observed for each process, thereby indicating that the method provides a novel, highly applicable synthetic route to the abovementioned biologically important heterocyclic frameworks. As an application of this approach, an auto-tandem-type, one-pot process involving the oxidative Heck reaction and subsequent C-H cyclization using cinnamamides and arylboronic acids as starting materials in the presence of a palladium catalyst was also developed for the rapid construction of the 2-quinolinone nucleus. PMID:24088691

  14. Dehydrative Direct C-H Allylation with Allylic Alcohols under [Cp*Co(III)] Catalysis.

    PubMed

    Suzuki, Yudai; Sun, Bo; Sakata, Ken; Yoshino, Tatsuhiko; Matsunaga, Shigeki; Kanai, Motomu

    2015-08-17

    The unique reactivity of [Cp*Co(III)] over [Cp*Rh(III)] was demonstrated. A cationic [Cp*Co(III)] catalyst promoted direct dehydrative C-H allylation with non-activated allyl alcohols, thus giving C2-allylated indoles, pyrrole, and phenyl-pyrazole in good yields, while analogous [Cp*Rh(III)] catalysts were not effective. The high γ-selectivity and C2-selectivity indicated that the reaction proceeded by directing-group-assisted C-H metalation. DFT calculations suggested that the γ-selective substitution reaction proceeded by C-H metalation and insertion of a C-C double bond, with subsequent β-hydroxide elimination. The [Cp*Co(III)] catalyst favored β-hydroxide elimination over β-hydride elimination.

  15. Enantioselective Intramolecular Hydroarylation of Alkenes via Directed C-H Bond Activation

    SciTech Connect

    Harada, Hitoshi; Thalji, Reema; Bergman, Robert; Ellman, Jonathan

    2008-05-22

    Highly enantioselective catalytic intramolecular ortho-alkylation of aromatic imines containing alkenyl groups tethered at the meta position relative to the imine directing group has been achieved using [RhCl(coe){sub 2}]{sub 2} and chiral phosphoramidite ligands. Cyclization of substrates containing 1,1- and 1,2-disubstituted as well as trisubstituted alkenes were achieved with enantioselectivities >90% ee for each substrate class. Cyclization of substrates with Z-alkene isomers proceeded much more efficiently than substrates with E-alkene isomers. This further enabled the highly stereoselective intramolecular alkylation of certain substrates containing Z/E-alkene mixtures via a Rh-catalyzed alkene isomerization with preferential cyclization of the Z-isomer.

  16. A cyclic (alkyl)(amido)carbene: synthesis, study and utility as a desulfurization reagent.

    PubMed

    McCarty, Zachary R; Lastovickova, Dominika N; Bielawski, Christopher W

    2016-04-01

    The synthesis and study of a cyclic (alkyl)(amido)carbene is described. The carbene was found to undergo C-H insertion at low temperatures, formed cyclopropenes upon exposure to alkynes, and facilitated desulfurization reactions. Spectroscopic studies revealed that the carbene is strongly π-accepting but retains a complimentary degree of σ-donating properties. PMID:27010415

  17. Rhodium catalyzed chelation-assisted C-H bond functionalization reactions.

    PubMed

    Colby, Denise A; Tsai, Andy S; Bergman, Robert G; Ellman, Jonathan A

    2012-06-19

    Over the last several decades, researchers have achieved remarkable progress in the field of organometallic chemistry. The development of metal-catalyzed cross-coupling reactions represents a paradigm shift in chemical synthesis, and today synthetic chemists can readily access carbon-carbon and carbon-heteroatom bonds from a vast array of starting compounds. Although we cannot understate the importance of these methods, the required prefunctionalization to carry out these reactions adds cost and reduces the availability of the starting reagents. The use of C-H bond activation in lieu of prefunctionalization has presented a tantalizing alternative to classical cross-coupling reactions. Researchers have met the challenges of selectivity and reactivity associated with the development of C-H bond functionalization reactions with an explosion of creative advances in substrate and catalyst design. Literature reports on selectivity based on steric effects, acidity, and electronic and directing group effects are now numerous. Our group has developed an array of C-H bond functionalization reactions that take advantage of a chelating directing group, and this Account surveys our progress in this area. The use of chelation control in C-H bond functionalization offers several advantages with respect to substrate scope and application to total synthesis. The predictability and decreased dependence on the inherent stereoelectronics of the substrate generally result in selective and high yielding transformations with broad applicability. The nature of the chelating moiety can be chosen to serve as a functional handle in subsequent elaborations. Our work began with the use of Rh(I) catalysts in intramolecular aromatic C-H annulations, which we further developed to include enantioselective transformations. The application of this chemistry to the simple olefinic C-H bonds found in α,β-unsaturated imines allowed access to highly substituted olefins, pyridines, and piperidines. We

  18. Synthesis and characterization of chitosan alkyl urea.

    PubMed

    Wang, Jing; Jiang, Ji-Zhou; Chen, Wei; Bai, Zheng-Wu

    2016-07-10

    Chitosan is a versatile material employed for various purposes in many fields including the development of chiral stationary phases for enantioseparation. Chitosan alkyl urea is a kind of intermediate used to prepare enantioseparation materials. In order to synthesize the intermediates, in the present work, a new way to prepare chitosan alkyl urea has been established: chitosan was first reacted with methyl chloroformate yielding N-methoxyformylated chitosan, which was then converted to chitosan alkyl urea through amine-ester exchange reaction. With a large excess of methyl chloroformate and primary amine of low stereohindrance, the amino group in chitosan could be almost completely converted to ureido group. The as-prepared chitosan alkyl urea derivatives were characterized by IR, (1)H NMR, (13)C NMR,(1)H-(1)H COSY and (1)H-(13)C HSQC NMR spectra. The chemical shifts of hydrogen and carbon atoms of glucose unit were assigned. It was found that the degree of substitution was obviously lower if cyclopropyl amine, aniline, tert-butyl amine and diethyl amine were used as reactants for the amine-ester exchange reaction. The reason was explained with the aid of theoretical calculations.

  19. Metal-Free sp(2)-C-H Borylation as a Common Reactivity Pattern of Frustrated 2-Aminophenylboranes.

    PubMed

    Chernichenko, Konstantin; Lindqvist, Markus; Kótai, Bianka; Nieger, Martin; Sorochkina, Kristina; Pápai, Imre; Repo, Timo

    2016-04-13

    C-H borylation is a powerful and atom-efficient method for converting affordable and abundant chemicals into versatile organic reagents used in the production of fine chemicals and functional materials. Herein we report a facile C-H borylation of aromatic and olefinic C-H bonds with 2-aminophenylboranes. Computational and experimental studies reveal that the metal-free C-H insertion proceeds via a frustrated Lewis pair mechanism involving heterolytic splitting of the C-H bond by cooperative action of the amine and boryl groups. The adapted geometry of the reactive B and N centers results in an unprecedentently low kinetic barrier for both insertion into the sp(2)-C-H bond and intramolecular protonation of the sp(2)-C-B bond in 2-ammoniophenyl(aryl)- or -(alkenyl)borates. This common reactivity pattern serves as a platform for various catalytic reactions such as C-H borylation and hydrogenation of alkynes. In particular, we demonstrate that simple 2-aminopyridinium salts efficiently catalyze the C-H borylation of hetarenes with catecholborane. This reaction is presumably mediated by a borenium species isoelectronic to 2-aminophenylboranes.

  20. Capillary electrochromatography with polyacrylamide monolithic stationary phases having bonded dodecyl ligands and sulfonic acid groups: evaluation of column performance with alkyl phenyl ketones and neutral moderately polar pesticides.

    PubMed

    Zhang, M; El Rassi, Z

    2001-08-01

    In this report, we describe the preparation of porous polyacrylamide-based monolithic columns via vinyl polymerization. These monoliths possess in their structures bonded dodecyl ligands and sulfonic acid groups. While the sulfonic acid groups are meant to support the electroosmotic flow (EOF) necessary for moving the mobile phase through the monolithic capillary, the dodecyl ligands are introduced to provide the nonpolar sites for chromatographic retention. However, incorporating the sulfonic acid groups in the monoliths does not only support the EOF but also exhibit hydrophilic interaction with moderately polar compounds such as urea herbicides and carbamates insecticides. Consequently, mixed-mode (reversed-phase/normal phase) retention behavior is observed with neutral and moderately polar pesticides. The amount of sulfonic acid group in the monolith can be conveniently adjusted by changing the amount of vinylsulfonic acid added to the polymerization reaction. Optimum EOF velocity and adequate chromatographic retention are obtained when 15% vinylsulfonic acid is added to the reaction mixture. Under these conditions, rapid separation and high plate counts reaching greater than 400000 plates/m are readily obtained.

  1. Scalable and sustainable electrochemical allylic C-H oxidation.

    PubMed

    Horn, Evan J; Rosen, Brandon R; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D; Baran, Phil S

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as "classics". Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact.

  2. Scalable and sustainable electrochemical allylic C-H oxidation.

    PubMed

    Horn, Evan J; Rosen, Brandon R; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D; Baran, Phil S

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as "classics". Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact. PMID:27096371

  3. Scalable and sustainable electrochemical allylic C-H oxidation

    NASA Astrophysics Data System (ADS)

    Horn, Evan J.; Rosen, Brandon R.; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D.; Baran, Phil S.

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as “classics”. Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact.

  4. Method of making alkyl esters

    DOEpatents

    Elliott, Brian

    2010-09-14

    Methods of making alkyl esters are described herein. The methods are capable of using raw, unprocessed, low-cost feedstocks and waste grease. Generally, the method involves converting a glyceride source to a fatty acid composition and esterifying the fatty acid composition to make alkyl esters. In an embodiment, a method of making alkyl esters comprises providing a glyceride source. The method further comprises converting the glyceride source to a fatty acid composition comprising free fatty acids and less than about 1% glyceride by mass. Moreover, the method comprises esterifying the fatty acid composition in the presence of a solid acid catalyst at a temperature ranging firm about 70.degree. C. to about 120.degree. C. to produce alkyl esters, such that at least 85% of the free fatty acids are converted to alkyl esters. The method also incorporates the use of packed bed reactors for glyceride conversion and/or fatty acid esterification to make alkyl esters.

  5. C-H bond activation by f-block complexes.

    PubMed

    Arnold, Polly L; McMullon, Max W; Rieb, Julia; Kühn, Fritz E

    2015-01-01

    Most homogeneous catalysis relies on the design of metal complexes to trap and convert substrates or small molecules to value-added products. Organometallic lanthanide compounds first gave a tantalizing glimpse of their potential for catalytic C-H bond transformations with the selective cleavage of one C-H bond in methane by bis(permethylcyclopentadienyl)lanthanide methyl [(η(5) -C5 Me5 )2 Ln(CH3 )] complexes some 25 years ago. Since then, numerous metal complexes from across the periodic table have been shown to selectively activate hydrocarbon C-H bonds, but the challenges of closing catalytic cycles still remain; many f-block complexes show great potential in this important area of chemistry.

  6. C-H bond activation by f-block complexes.

    PubMed

    Arnold, Polly L; McMullon, Max W; Rieb, Julia; Kühn, Fritz E

    2015-01-01

    Most homogeneous catalysis relies on the design of metal complexes to trap and convert substrates or small molecules to value-added products. Organometallic lanthanide compounds first gave a tantalizing glimpse of their potential for catalytic C-H bond transformations with the selective cleavage of one C-H bond in methane by bis(permethylcyclopentadienyl)lanthanide methyl [(η(5) -C5 Me5 )2 Ln(CH3 )] complexes some 25 years ago. Since then, numerous metal complexes from across the periodic table have been shown to selectively activate hydrocarbon C-H bonds, but the challenges of closing catalytic cycles still remain; many f-block complexes show great potential in this important area of chemistry. PMID:25384554

  7. The direct arylation of allylic sp(3) C-H bonds via organic and photoredox catalysis.

    PubMed

    Cuthbertson, James D; MacMillan, David W C

    2015-03-01

    The direct functionalization of unactivated sp(3) C-H bonds is still one of the most challenging problems facing synthetic organic chemists. The appeal of such transformations derives from their capacity to facilitate the construction of complex organic molecules via the coupling of simple and otherwise inert building blocks, without introducing extraneous functional groups. Despite notable recent efforts, the establishment of general and mild strategies for the engagement of sp(3) C-H bonds in C-C bond forming reactions has proved difficult. Within this context, the discovery of chemical transformations that are able to directly functionalize allylic methyl, methylene and methine carbons in a catalytic manner is a priority. Although protocols for direct oxidation and amination of allylic C-H bonds (that is, C-H bonds where an adjacent carbon is involved in a C = C bond) have become widely established, the engagement of allylic substrates in C-C bond forming reactions has thus far required the use of pre-functionalized coupling partners. In particular, the direct arylation of non-functionalized allylic systems would enable access to a series of known pharmacophores (molecular features responsible for a drug's action), though a general solution to this long-standing challenge remains elusive. Here we report the use of both photoredox and organic catalysis to accomplish a mild, broadly effective direct allylic C-H arylation. This C-C bond forming reaction readily accommodates a broad range of alkene and electron-deficient arene reactants, and has been used in the direct arylation of benzylic C-H bonds. PMID:25739630

  8. The direct arylation of allylic sp(3) C-H bonds via organic and photoredox catalysis.

    PubMed

    Cuthbertson, James D; MacMillan, David W C

    2015-03-01

    The direct functionalization of unactivated sp(3) C-H bonds is still one of the most challenging problems facing synthetic organic chemists. The appeal of such transformations derives from their capacity to facilitate the construction of complex organic molecules via the coupling of simple and otherwise inert building blocks, without introducing extraneous functional groups. Despite notable recent efforts, the establishment of general and mild strategies for the engagement of sp(3) C-H bonds in C-C bond forming reactions has proved difficult. Within this context, the discovery of chemical transformations that are able to directly functionalize allylic methyl, methylene and methine carbons in a catalytic manner is a priority. Although protocols for direct oxidation and amination of allylic C-H bonds (that is, C-H bonds where an adjacent carbon is involved in a C = C bond) have become widely established, the engagement of allylic substrates in C-C bond forming reactions has thus far required the use of pre-functionalized coupling partners. In particular, the direct arylation of non-functionalized allylic systems would enable access to a series of known pharmacophores (molecular features responsible for a drug's action), though a general solution to this long-standing challenge remains elusive. Here we report the use of both photoredox and organic catalysis to accomplish a mild, broadly effective direct allylic C-H arylation. This C-C bond forming reaction readily accommodates a broad range of alkene and electron-deficient arene reactants, and has been used in the direct arylation of benzylic C-H bonds.

  9. The direct arylation of allylic sp3 C-H bonds via organic and photoredox catalysis

    NASA Astrophysics Data System (ADS)

    Cuthbertson, James D.; MacMillan, David W. C.

    2015-03-01

    The direct functionalization of unactivated sp3 C-H bonds is still one of the most challenging problems facing synthetic organic chemists. The appeal of such transformations derives from their capacity to facilitate the construction of complex organic molecules via the coupling of simple and otherwise inert building blocks, without introducing extraneous functional groups. Despite notable recent efforts, the establishment of general and mild strategies for the engagement of sp3 C-H bonds in C-C bond forming reactions has proved difficult. Within this context, the discovery of chemical transformations that are able to directly functionalize allylic methyl, methylene and methine carbons in a catalytic manner is a priority. Although protocols for direct oxidation and amination of allylic C-H bonds (that is, C-H bonds where an adjacent carbon is involved in a C = C bond) have become widely established, the engagement of allylic substrates in C-C bond forming reactions has thus far required the use of pre-functionalized coupling partners. In particular, the direct arylation of non-functionalized allylic systems would enable access to a series of known pharmacophores (molecular features responsible for a drug's action), though a general solution to this long-standing challenge remains elusive. Here we report the use of both photoredox and organic catalysis to accomplish a mild, broadly effective direct allylic C-H arylation. This C-C bond forming reaction readily accommodates a broad range of alkene and electron-deficient arene reactants, and has been used in the direct arylation of benzylic C-H bonds.

  10. Trapping a Highly Reactive Nonheme Iron Intermediate That Oxygenates Strong C-H Bonds with Stereoretention.

    PubMed

    Serrano-Plana, Joan; Oloo, Williamson N; Acosta-Rueda, Laura; Meier, Katlyn K; Verdejo, Begoña; García-España, Enrique; Basallote, Manuel G; Münck, Eckard; Que, Lawrence; Company, Anna; Costas, Miquel

    2015-12-23

    An unprecedentedly reactive iron species (2) has been generated by reaction of excess peracetic acid with a mononuclear iron complex [Fe(II)(CF3SO3)2(PyNMe3)] (1) at cryogenic temperatures, and characterized spectroscopically. Compound 2 is kinetically competent for breaking strong C-H bonds of alkanes (BDE ≈ 100 kcal·mol(-1)) through a hydrogen-atom transfer mechanism, and the transformations proceed with stereoretention and regioselectively, responding to bond strength, as well as to steric and polar effects. Bimolecular reaction rates are at least an order of magnitude faster than those of the most reactive synthetic high-valent nonheme oxoiron species described to date. EPR studies in tandem with kinetic analysis show that the 490 nm chromophore of 2 is associated with two S = 1/2 species in rapid equilibrium. The minor component 2a (∼5% iron) has g-values at 2.20, 2.19, and 1.99 characteristic of a low-spin iron(III) center, and it is assigned as [Fe(III)(OOAc)(PyNMe3)](2+), also by comparison with the EPR parameters of the structurally characterized hydroxamate analogue [Fe(III)(tBuCON(H)O)(PyNMe3)](2+) (4). The major component 2b (∼40% iron, g-values = 2.07, 2.01, 1.95) has unusual EPR parameters, and it is proposed to be [Fe(V)(O)(OAc)(PyNMe3)](2+), where the O-O bond in 2a has been broken. Consistent with this assignment, 2b undergoes exchange of its acetate ligand with CD3CO2D and very rapidly reacts with olefins to produce the corresponding cis-1,2-hydroxoacetate product. Therefore, this work constitutes the first example where a synthetic nonheme iron species responsible for stereospecific and site selective C-H hydroxylation is spectroscopically trapped, and its catalytic reactivity against C-H bonds can be directly interrogated by kinetic methods. The accumulated evidence indicates that 2 consists mainly of an extraordinarily reactive [Fe(V)(O)(OAc)(PyNMe3)](2+) (2b) species capable of hydroxylating unactivated alkyl C-H bonds with

  11. Trapping a Highly Reactive Nonheme Iron Intermediate That Oxygenates Strong C-H Bonds with Stereoretention.

    PubMed

    Serrano-Plana, Joan; Oloo, Williamson N; Acosta-Rueda, Laura; Meier, Katlyn K; Verdejo, Begoña; García-España, Enrique; Basallote, Manuel G; Münck, Eckard; Que, Lawrence; Company, Anna; Costas, Miquel

    2015-12-23

    An unprecedentedly reactive iron species (2) has been generated by reaction of excess peracetic acid with a mononuclear iron complex [Fe(II)(CF3SO3)2(PyNMe3)] (1) at cryogenic temperatures, and characterized spectroscopically. Compound 2 is kinetically competent for breaking strong C-H bonds of alkanes (BDE ≈ 100 kcal·mol(-1)) through a hydrogen-atom transfer mechanism, and the transformations proceed with stereoretention and regioselectively, responding to bond strength, as well as to steric and polar effects. Bimolecular reaction rates are at least an order of magnitude faster than those of the most reactive synthetic high-valent nonheme oxoiron species described to date. EPR studies in tandem with kinetic analysis show that the 490 nm chromophore of 2 is associated with two S = 1/2 species in rapid equilibrium. The minor component 2a (∼5% iron) has g-values at 2.20, 2.19, and 1.99 characteristic of a low-spin iron(III) center, and it is assigned as [Fe(III)(OOAc)(PyNMe3)](2+), also by comparison with the EPR parameters of the structurally characterized hydroxamate analogue [Fe(III)(tBuCON(H)O)(PyNMe3)](2+) (4). The major component 2b (∼40% iron, g-values = 2.07, 2.01, 1.95) has unusual EPR parameters, and it is proposed to be [Fe(V)(O)(OAc)(PyNMe3)](2+), where the O-O bond in 2a has been broken. Consistent with this assignment, 2b undergoes exchange of its acetate ligand with CD3CO2D and very rapidly reacts with olefins to produce the corresponding cis-1,2-hydroxoacetate product. Therefore, this work constitutes the first example where a synthetic nonheme iron species responsible for stereospecific and site selective C-H hydroxylation is spectroscopically trapped, and its catalytic reactivity against C-H bonds can be directly interrogated by kinetic methods. The accumulated evidence indicates that 2 consists mainly of an extraordinarily reactive [Fe(V)(O)(OAc)(PyNMe3)](2+) (2b) species capable of hydroxylating unactivated alkyl C-H bonds with

  12. Lipoxygenase inhibitory activity of alkyl protocatechuates.

    PubMed

    Ha, Tae Joung; Shimizu, Kuniyoshi; Kubo, Isao

    2014-09-15

    Alkyl 3,4-dihydroxybenzoates (protocatechuates) inhibited linoleic acid peroxidation catalyzed by soybean lipoxygenase-1 (EC 1.13.11.12, Type 1). Their inhibitory activities displayed a parabolic function of their lipophilicity and maximized with alkyl chain lengths of between C11 and C14. Tetradecanyl protocatechuate exhibited the most potent inhibition with an IC50 of 0.05 μM, followed by dodecyl (lauryl) protocatechuate with an IC50 of 0.06 μM. However, their parent compound, protocatechuic acid, did not show this inhibitory activity up to 200 μM, indicating that the alkyl chain length is significantly related to the inhibition activity. The allosteric (or cooperative) inhibition of soybean lipoxygenase-1 of longer alkyl protocatechuates is reversible but in combination with their iron binding ability to disrupt the active site competitively and to interact with the hydrophobic portion surrounding near the active site (sequential action). In the case of dodecyl protocatechuate, the enzyme quickly binds this protocatechuate and then its dodecyl group undergoes a slow interaction with the hydrophobic domain in close proximity to the active site in the enzyme. The inhibition kinetics analyzed by Lineweaver-Burk plots indicates that octyl protocatechuate is a competitive inhibitor and the inhibition constant (Ki) was obtained as 0.23 μM but dodecyl protocatechuate is a slow binding inhibitor.

  13. Ruthenium(0)-Catalyzed C-H Arylation of Aromatic Imines under Neutral Conditions: Access to Biaryl Aldehydes.

    PubMed

    Hu, Feng; Szostak, Michal

    2016-09-01

    The first ruthenium(0)-catalyzed C-H bond arylation of aromatic imines with arylboronates under neutral conditions is reported. This versatile method provides rapid access to a wide range of biaryl aldehydes that are difficult to assemble using traditional methods with high atom economy. A new hydrogen acceptor for Ru(0) arylation has been identified. This atom-economical strategy has potential for an array of direct applications in Ru(0)-catalyzed C-H bond arylations using removable directing groups. An indole synthesis by a sequential one-pot, multiple C-H activation protocol is reported. PMID:27529187

  14. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  15. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  16. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  17. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  18. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  19. Antihydrophobic cosolvent effects for alkylation reactions in water solution, particularly oxygen versus carbon alkylations of phenoxide ions.

    PubMed

    Breslow, Ronald; Groves, Kevin; Mayer, M Uljana

    2002-04-10

    Antihydrophobic cosolvents such as ethanol increase the solubility of hydrophobic molecules in water, and they also affect the rates of reactions involving hydrophobic surfaces. In simple reactions of hydrocarbons, such as the Diels-Alder dimerization of 1,3-cyclopentadiene, the rate and solubility data directly reflect the geometry of the transition state, in which some hydrophobic surface becomes hidden. In reactions involving polar groups, such as alkylations of phenoxide ions or S(N)1 ionizations of alkyl halides, cosolvents in water can have other effects as well. However, solvation of hydrophobic surfaces is still important. By the use of structure-reactivity relationships, and comparing the effects of ethanol and DMSO as solvents, it has been possible to sort out these effects. The conclusions are reinforced by an ab initio computer model for hydrophobic solvation. The result is a sensible transition state for phenoxide ion as a nucleophile, using its oxygen n electrons to avoid loss of conjugation. The geometry of alkylation of aniline is very different, involving packing (stacking) of the aniline ring onto the phenyl ring of a benzyl group in the benzylation reaction. The alkylation of phenoxide ions by benzylic chlorides can occur both at the phenoxide oxygen and on ortho and para positions of the ring. Carbon alkylation occurs in water, but not in nonpolar organic solvents, and it is observed only when the phenoxide has at least one methyl substituent ortho, meta, or para. The effects of phenol substituents and of antihydrophobic cosolvents on the rates of the competing alkylation processes indicate that in water the carbon alkylation involves a transition state with hydrophobic packing of the benzyl group onto the phenol ring. The results also support our conclusion that oxygen alkylation uses the n electrons of the phenoxide oxygen as the nucleophile and does not have hydrophobic overlap in the transition state. The mechanisms and explanations for

  20. Effect of cation asymmetry on the aggregation in aqueous 1-alkyl,3-decylimidazolium bromide solutions: molecular dynamics studies.

    PubMed

    Palchowdhury, Sourav; Bhargava, B L

    2014-06-12

    Self-assembly of cations in aqueous solutions of 1-alkyl,3-decylimidazolium bromide (with four different alkyl chains, methyl, butyl, heptyl, and decyl chain,) have been studied using atomistic molecular dynamics simulations. Polydisperse aggregates of cations are formed in the solution with alkyl tails in the core and the polar head groups present at the surface of the aggregates. The shape of the aggregates is dictated by the length of the alkyl chain. Aggregation numbers increase steadily with the increasing alkyl chain length. The greater asymmetry in the two-substituent chain length leads to a different surface structure compared to that of the cations with alkyl chains of similar length.

  1. Dehydrogenation processes via C-H activation within alkylphosphines.

    PubMed

    Grellier, Mary; Sabo-Etienne, Sylviane

    2012-01-01

    Phosphines are commonly used in organometallic chemistry and are present in a wide variety of catalytic systems. This feature article highlights the advances made in dehydrogenation processes occurring within alkylphosphines, with the aim of further developing catalytic processes involving C-H activation together with potential applications in the field of hydrogen storage. PMID:21956347

  2. Enzyme catalysis: C-H activation is a Reiske business

    NASA Astrophysics Data System (ADS)

    Bruner, Steven D.

    2011-05-01

    Enzymes that selectively oxidize unactivated C-H bonds are capable of constructing complex molecules with high efficiency. A new member of this enzyme family is RedG, a Reiske-type oxygenase that catalyses chemically challenging cyclizations in the biosynthesis of prodiginine natural products.

  3. Competition Between π-π and C-H/π Interactions: A Comparison of the Structural and Electronic Properties of Alkoxy-Substituted 1,8-Bis((propyloxyphenyl)ethynyl)naphthalenes.

    PubMed

    Carson, Bradley E; Parker, Trent M; Hohenstein, Edward G; Brizius, Glen L; Komorner, Whitney; King, Rollin A; Collard, David M; Sherrill, C David

    2015-12-21

    The structural and electronic consequences of π-π and C-H/π interactions in two alkoxy-substituted 1,8-bis- ((propyloxyphenyl)ethynyl)naphthalenes are explored by using X-ray crystallography and electronic structure computations. The crystal structure of analogue 4, bearing an alkoxy side chain in the 4-position of each of the phenyl rings, adopts a π-stacked geometry, whereas analogue 8, bearing alkoxy groups at both the 2- and the 5-positions of each ring, has a geometry in which the rings are splayed away from a π-stacked arrangement. Symmetry-adapted perturbation theory analysis was performed on the two analogues to evaluate the interactions between the phenylethynyl arms in each molecule in terms of electrostatic, steric, polarization, and London dispersion components. The computations support the expectation that the π-stacked geometry of the alkoxyphenyl units in 4 is simply a consequence of maximizing π-π interactions. However, the splayed geometry of 8 results from a more subtle competition between different noncovalent interactions: this geometry provides a favorable anti-alignment of C-O bond dipoles, and two C-H/π interactions in which hydrogen atoms of the alkyl side chains interact favorably with the π electrons of the other phenyl ring. These favorable interactions overcome competing π-π interactions to give rise to a geometry in which the phenylethynyl substituents are in an offset, unstacked arrangement.

  4. Convergent Synthesis of Diverse Nitrogen Heterocycles via Rh(III)-Catalyzed C-H Conjugate Addition/Cyclization Reactions.

    PubMed

    Weinstein, Adam B; Ellman, Jonathan A

    2016-07-01

    The development of Rh(III)-catalyzed C-H conjugate addition/cyclization reactions that provide access to synthetically useful fused bi- and tricyclic nitrogen heterocycles is reported. A broad scope of C-H functionalization substrates and electrophilic olefin coupling partners is effective, and depending on the nature of the directing group, cyclic imide, amide, or heteroaromatic products are obtained. An efficient synthesis of a pyrrolophenanthridine alkaloid natural product, oxoassoanine, highlights the utility of this method.

  5. Convergent Synthesis of Diverse Nitrogen Heterocycles via Rh(III)-Catalyzed C-H Conjugate Addition/Cyclization Reactions.

    PubMed

    Weinstein, Adam B; Ellman, Jonathan A

    2016-07-01

    The development of Rh(III)-catalyzed C-H conjugate addition/cyclization reactions that provide access to synthetically useful fused bi- and tricyclic nitrogen heterocycles is reported. A broad scope of C-H functionalization substrates and electrophilic olefin coupling partners is effective, and depending on the nature of the directing group, cyclic imide, amide, or heteroaromatic products are obtained. An efficient synthesis of a pyrrolophenanthridine alkaloid natural product, oxoassoanine, highlights the utility of this method. PMID:27337641

  6. An efficient generation of a functionalized tertiary-alkyl radical for copper-catalyzed tertiary-alkylative Mizoroki-Heck type reaction.

    PubMed

    Nishikata, Takashi; Noda, Yushi; Fujimoto, Ryo; Sakashita, Tomomi

    2013-11-01

    α-Halocarbonyl compounds undergo β-hydrogen elimination to give conjugated olefins in the presence of a transition-metal catalyst. However, a copper/triamine catalyst system can induce the alkylative Mizoroki–Heck reaction of styrenes with tertiary-alkyl halides possessing a withdrawing group under very mild conditions. This reaction provides an efficient synthetic methodology for tertiary-alkylated styrenes. PMID:24143934

  7. Iron Mineral Catalyzed C-H Activation As a Potential Pathway for Halogenation Processes

    NASA Astrophysics Data System (ADS)

    Tubbesing, C.; Schoeler, H. F.; Benzing, K.; Krause, T.; Lippe, S.; Rudloff, M.

    2014-12-01

    Due to increasing drinking water demand of mankind and an expected climate change the impact of salt lakes and salt deserts will increase within the next decades. Furthermore, a rising sea level influences coastal areas like salt marshes and abets processes which will lead to elevated organohalogen formation. An additional increase of the global warming potential, of particle formation and stratospheric ozone depletion is expected. Understanding these multifaceted processes is essential for mankind to be prepared for these alterations of the atmosphere. For example, Keppler et al. (2000) described the production of volatile halogenated organic compounds via oxidation of organic matter driven by ferric iron. However, the formation of long-chained alkyl halides in salt lakes is yet undisclosed. Despite the relative "inertness" of alkanes a direct halogenation of these compounds might be envisaged. In 2005 Vaillancourt et al. discovered a nonheme iron enzyme which is able to halogenate organic compounds via generating the high valent ferryl cation as reaction center. Based on various publications about C-H activation (Bergman, 2007) we postulate a halogenation process in which an iron containing minerals catalyse the C-H bond cleavage of organic compounds in soils. The generated organic radicals are highly reactive towards halides connected to the iron complex. We suggest that next to diagenetically altered iron containing enzymes, minerals such as oxides, hydroxides and sulfides are involved in abiotic halogenation processes. We applied the amino acid methionine as organic model compound and soluble iron species as reactants. All samples were incubated in aqueous phases containing various NaCl concentrations. As a result various halogenated ethanes and ethenes were identified as reaction products. References Bergman, R. G. (2007) Nature, 446(7134) 391-393 Keppler, F., et al. (2000) Nature, 403(6767) 298-301 Vaillancourt, F. H., et al. (2005) Nature, 436(7054) 1191-1194

  8. Reaction of sp/sup 2/ C-H bonds in unactivated alkenes with bis(diphosphine) complexes of iron

    SciTech Connect

    Baker, M.V.; Field, L.D.

    1986-11-12

    Over the last 10 years, there has been much interest in the chemistry of coordinatively unsaturated transition-metal complexes, particularly in the activation of alkyl C-H bonds by complexes of Ir, Rh, Re, and W. Some early fundamental work in the area of C-H bond activation involved Fe(DMPE)/sub 2/ (1) (DMPE = 1,2-bis(dimethylphosphino)ethane), a reactive intermediate generated by reductive elimination of naphthalene from cis-FeH(Np)DMPE)/sub 2/ (Np = 2-naphthyl); however, this system was limited in that only substrates with a reactivity greater than (or comparable to) that of the naphthalene byproduct could be examined. In addition, this route to 1 necessarily required reaction temperatures close to room temperature, where any thermally labile products may not have been sufficiently stable to be observed or characterized. An alternative, more versatile route to 1 is by photolysis of the dihydride FeH/sub 2/(DMPE)/sub 2/ (2). The authors have examined the reactions of 1, generated photochemically at low temperature, with hydrocarbons, and report here the formation of products arising from Fe insertion into sp/sup 2/ C-H bonds of unactivated alkenes.

  9. Rh-Catalyzed Intermolecular Reactions of α-Alkyl-α-Diazo Carbonyl Compounds with Selectivity over β-Hydride Migration.

    PubMed

    DeAngelis, Andrew; Panish, Robert; Fox, Joseph M

    2016-01-19

    -hydride migration. Enantioselective reactions of α-alkyl-α-diazocarbonyl compounds have been developed using bimetallic N-imido-tert-leucinate-derived complexes. The most effective complexes were found by computation and X-ray crystallography to adopt a "chiral crown" conformation in which all of the imido groups are presented on one face of the paddlewheel complex in a chiral arrangement. Insight from computational studies guided the design and synthesis of a mixed ligand paddlewheel complex, Rh2(S-PTTL)3TPA, the structure of which bears similarity to the chiral crown complex Rh2(S-PTTL)4. Rh2(S-PTTL)3TPA engages substrate classes (aliphatic alkynes, silylacetylenes, α-olefins) that are especially challenging in intermolecular reactions of α-alkyl-α-diazoesters and catalyzes enantioselective cyclopropanation, cyclopropenation, and indole C-H functionalization with yields and enantioselectivities that are comparable or superior to Rh2(S-PTTL)4. The work detailed in this Account describes progress toward enabling a more general utility for α-alkyl-α-diazo compounds in Rh-catalyzed carbene reactions. Further studies on ligand design and synthesis will continue to broaden the scope of their selective reactions.

  10. Computational study on the mechanism and selectivity of C-H bond activation and dehydrogenative functionalization in the synthesis of rhazinilam.

    PubMed

    Ellis, Corey S; Ess, Daniel H

    2011-09-01

    The key platinum mediated C-H bond activation and functionalization steps in the synthesis of (-)-rhazinilam (Johnson, J. A.; Li, N.; Sames, D. J. Am. Chem. Soc. 2002, 124, 6900) were investigated using the M06 and B3LYP density functional approximation methods. This computational study reveals that ethyl group dehydrogenation begins with activation of a primary C-H bond in preference to a secondary C-H bond in an insertion/methane elimination pathway. The C-H activation step is found to be reversible while the methane elimination (reductive elimination) transition state controls rate and diastereoselectivity. The chiral oxazolinyl ligand induces ethyl group selectivity through stabilizing weak interactions between its phenyl group (or cyclohexyl group) and the carboxylate group. After C-H activation and methane elimination steps, Pt-C bond functionalization occurs through β-hydride elimination to give the alkene platinum hydride complex. PMID:21812492

  11. PROCESS FOR PRODUCING ALKYL ORTHOPHOSPHORIC ACID EXTRACTANTS

    DOEpatents

    Grinstead, R.R.

    1962-01-23

    A process is given for producing superior alkyl orthophosphoric acid extractants for use in solvent extraction methods to recover and purify various metals such as uranium and vanadium. The process comprises slurrying P/sub 2/O/ sub 5/ in a solvent diluent such as kerosene, benzene, isopropyl ether, and the like. An alipbatic alcohol having from nine to seventeen carbon atoms, and w- hcrein ihc OH group is situated inward of the terminal carbon atoms, is added to the slurry while the reaction temperature is mainiained below 60 deg C. The alcohol is added in the mole ratio of about 2 to l, alcohol to P/sub 2/O/sub 5/. A pyrophosphate reaotion product is formed in the slurry-alcohol mixture. Subsequently, the pyrophosphate reaction product is hydrolyzed with dilute mineral acid to produce the desired alkyl orthophosphoric aeid extractant. The extraetant may then be separated and utilized in metal-recovery, solvent- extraction processes. (AEC)

  12. Phosphorylation of C-H bonds of aromatic compounds using metals and metal complexes

    NASA Astrophysics Data System (ADS)

    Budnikova, Yu H.; Sinyashin, O. G.

    2015-09-01

    Key achievements and current trends in the development of methods for phosphorylation of aromatic C-H bonds catalyzed by metal salts and complexes are considered. The most important and promising approaches of the last decade, including those concerning the synthesis and properties of arylphosphonates, are distinguished. Methods for the introduction of a phosphonate group into non-activated and functionally substituted aromatic compounds and heteroaromatic molecules and phosphorylation-cyclization reactions involving acetylenes, 2-isocyanobiphenyls and alkynoates are analyzed. The possibilities of ligand-directed phosphorylation of compounds with aromatic C-H bonds and presumed mechanisms and intermediates in the C-P bond formation reactions are considered. The potential of this extensively developing research trend in organic and organoelement chemistry is highlighted. The bibliography includes 263 references.

  13. C-H activation of cycloalkenes by dimetallynes (M = Ge, Sn) under ambient conditions.

    PubMed

    Summerscales, Owen T; Fettinger, James C; Power, Philip P

    2011-08-10

    Treatment of the dimetallynes Ar'EEAr' [E = Ge, Sn; Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-iPr(2))(2)] with a cyclic olefin-cyclopentadiene (CpH), cyclopentene, 1,4-cyclohexadiene (CHD), or cyclohexene-showed that, with the exception of cyclohexene, they react readily, affording C-H activation at room temperature. Reaction of the digermyne and distannyne with CpH gave the cyclopentadienyl anion, which is bound in a π-fashion to a mononuclear group 14 element center, along with evolution of hydrogen gas. Unusually, the digermyne also reacted with cyclopentene to give the same dehydroaromatization product, formed from triple C-H activation/dehydrogenation. It also was found to react with CHD to give a mixture of (Ar'GeH)(2), benzene, and a new 7-germanorbornadiene species bound to a cyclohex-2-enyl fragment. PMID:21749107

  14. Cobalt(iii) catalyzed C-8 selective C-H and C-O coupling of quinoline N-oxide with internal alkynes via C-H activation and oxygen atom transfer.

    PubMed

    Barsu, Nagaraju; Sen, Malay; Premkumar, J Richard; Sundararaju, Basker

    2016-01-25

    An efficient, scalable, atom-economical, regio-selective air stable Cp*Co(iii) catalyzed C-H and C-O coupling via a C-H activation/oxygen atom transfer reaction of quinoline N-oxide and an internal alkyne is reported. Such a catalytic transformation is witnessed for the first time with a cobalt catalyst and using N-oxide as a traceless directing group, in contrast to the existing literature. The developed synthetic methodology is straightforward and possesses various functional group tolerances, including heterocycles.

  15. Reactions between a superoxide anion and alkyl bromides in dimethyl sulfoxide

    NASA Astrophysics Data System (ADS)

    Pomeshchenko, A. I.; Efimova, I. V.; Dmitruk, A. F.; Zarechnaya, O. M.; Opeida, I. A.

    2011-10-01

    The activation parameters of the reactions between a superoxide anion (O{2/·-}) and alkyl bromides are measured. An ab initio study of the transition states for various mechanisms of this reaction is performed. The mechanism of radical separation in a polar solvent becomes competitive upon an increase in the number of alkyl groups in an alkyl bromide molecule and depends on their arrangement relative to a reaction center.

  16. Boron-Catalyzed N-Alkylation of Amines using Carboxylic Acids.

    PubMed

    Fu, Ming-Chen; Shang, Rui; Cheng, Wan-Min; Fu, Yao

    2015-07-27

    A boron-based catalyst was found to catalyze the straightforward alkylation of amines with readily available carboxylic acids in the presence of silane as the reducing agent. Various types of primary and secondary amines can be smoothly alkylated with good selectivity and good functional-group compatibility. This metal-free amine alkylation was successfully applied to the synthesis of three commercial medicinal compounds, Butenafine, Cinacalcet. and Piribedil, in a one-pot manner without using any metal catalysts. PMID:26150397

  17. Boron-Catalyzed N-Alkylation of Amines using Carboxylic Acids.

    PubMed

    Fu, Ming-Chen; Shang, Rui; Cheng, Wan-Min; Fu, Yao

    2015-07-27

    A boron-based catalyst was found to catalyze the straightforward alkylation of amines with readily available carboxylic acids in the presence of silane as the reducing agent. Various types of primary and secondary amines can be smoothly alkylated with good selectivity and good functional-group compatibility. This metal-free amine alkylation was successfully applied to the synthesis of three commercial medicinal compounds, Butenafine, Cinacalcet. and Piribedil, in a one-pot manner without using any metal catalysts.

  18. Alkylation of complementary ribonucleotides in nanoreactors.

    PubMed

    Angelico, Ruggero; Losito, Ilario; Cuomo, Francesca; Ceglie, Andrea; Palmisano, Francesco

    2013-01-14

    The aim of the present study was to provide experimental evidence that base pairing, commonly occurring between nucleic bases in more complex supramolecular arrangements, may affect the reaction pathways associated with the alkylation of bases themselves. In pursuit of this aim, dilute aqueous solutions of Cytidine- (CMP) and Guanosine-Mono-Phosphate (GMP) as single reactants or in an equimolar mixture were treated with the electrophilic alkylating agent 1,2-Dodecyl-Epoxide (DE), which was preventively dispersed into micellar solutions prepared with the cationic surfactant hexadecyltrimethylammonium bromide (CTAB). In the early stage of the reaction, CTAB micelles acted as micro-heterogeneous nanoreactors, but as the reaction progressed the systems evolved toward the formation of polydisperse aggregates, whose size and surface-charge properties were monitored as a function of reaction time. From mass spectrometry analyses, it was found that the deamination of cytosine, a side reaction related to the alkylation of the amino group of CMP, was reduced when both the complementary ribonucleotides were present in the same reaction mixture. The involvement of specific sites able to establish C:G interactions (possibly via H-bonding or π-π stacking) could explain the reduced reactivity occurring at the level of some of the nucleophilic centers responsible for molecular recognition.

  19. Synthesis of trifluoromethylated isoxazoles and their elaboration through inter- and intra-molecular C-H arylation.

    PubMed

    Poh, Jian-Siang; García-Ruiz, Cristina; Zúñiga, Andrea; Meroni, Francesca; Blakemore, David C; Browne, Duncan L; Ley, Steven V

    2016-07-01

    We report conditions for the preparation of a range of trifluoromethylated isoxazole building blocks through the cycloaddition reaction of trifluoromethyl nitrile oxide. It was found that controlling the rate (and therefore concentration) of the formation of the trifluoromethyl nitrile oxide was Critical for the preferential formation of the desired isoxazole products versus the furoxan dimer. Different conditions were optimised for both aryl- and alkyl-substituted alkynes. In addition, the reactivity at the isoxazole 4-position has been briefly explored for these building blocks. Conditions for intermolecular C-H arylation, lithiation and electrophile quench, and alkoxylation were all identified with brief substrate scoping that signifies useful tolerance to a range of functionalities. Finally, complementary processes for structural diversification through either intramolecular cyclisation or intermolecular cross-coupling were developed.

  20. Annulation of aromatic imines via directed C-H bond activation.

    PubMed

    Thalji, Reema K; Ahrendt, Kateri A; Bergman, Robert G; Ellman, Jonathan A

    2005-08-19

    A directed C-H bond activation approach to the synthesis of indans, tetralins, dihydrofurans, dihydroindoles, and other polycyclic aromatic compounds is presented. Cyclization of aromatic ketimines and aldimines containing alkenyl groups tethered at the meta position relative to the imine directing group has been achieved using (PPh3)3RhCl (Wilkinson's catalyst). The cyclization of a range of aromatic ketimines and aldimines provides bi- and tricyclic ring systems with good regioselectivity. Different ring sizes and substitution patterns can be accessed through the coupling of monosubstituted, 1,1- or 1,2-disubstituted, and trisubstituted alkenes bearing both electron-rich and electron-deficient functionality.

  1. Kinetic analysis of microbial desulfurization of model and light gas oils containing multiple alkyl dibenzothiophenes.

    PubMed

    Kobayashi, M; Horiuchi, K; Yoshikawa, O; Hirasawa, K; Ishii, Y; Fujino, K; Sugiyama, H; Maruhashi, K

    2001-02-01

    The reaction mechanism of biodesulfurization was investigated using whole cells of Rhodococcus erythropolis KA2-5-1, which have the ability to convert dibenzothiophene (DBT) into 2-hydroxybiphenyl. The desulfurization patterns of alkyl DBTs were represented by the Michaeis-Menten equation. The values of rate constants, the limiting maximal velocity (Vmax) and Michaelis constant (Km), for desulfurization of alkyl DBTs were calculated. The relative desulfurization activities of various alkyl DBTs were reduced in proportion to the total carbon numbers of alkyl substituent groups. Alkyl DBTs that had a total of six carbons of alkyl substituent groups were not desulfurized. The type or position of alkyl substituent groups had little effect on desulfurization activity. The desulfurization activity of each alkyl DBT, when mixed together, was reduced. This phenomenon was caused by apparent competitive inhibition of substrates. Using the apparent competitive inhibition model, the desulfurization pattern of a multiple components system containing alkyl DBTs was elucidated. This model was also applicable for biodesulfurization of light gas oil.

  2. Iron-catalyzed directed C2-alkylation and alkenylation of indole with vinylarenes and alkynes.

    PubMed

    Wong, Mun Yee; Yamakawa, Takeshi; Yoshikai, Naohiko

    2015-02-01

    An iron-N-heterocyclic carbene catalyst generated from an iron(III) salt, an imidazolinium salt, and a Grignard reagent promotes alkylation and alkenylation reactions at the indole C2-position with vinylarenes and internal alkynes, respectively, via imine-directed C-H activation. The former reaction affords 1,1-diarylalkane derivatives with exclusive regioselectivity. Deuterium-labeling experiments suggest that these reactions involve oxidative addition of the C-H bond to the iron center, insertion of the unsaturated bond into the Fe-H bond, and C-C reductive elimination. PMID:25575183

  3. Enantioselective functionalization of allylic C-H bonds following a strategy of functionalization and diversification.

    PubMed

    Sharma, Ankit; Hartwig, John F

    2013-11-27

    We report the enantioselective functionalization of allylic C-H bonds in terminal alkenes by a strategy involving the installation of a temporary functional group at the terminal carbon atom by C-H bond functionalization, followed by the catalytic diversification of this intermediate with a broad scope of reagents. The method consists of a one-pot sequence of palladium-catalyzed allylic C-H bond oxidation under neutral conditions to form linear allyl benzoates, followed by iridium-catalyzed allylic substitution. This overall transformation forms a variety of chiral products containing a new C-N, C-O, C-S, or C-C bond at the allylic position in good yield with a high branched-to-linear selectivity and excellent enantioselectivity (ee ≤97%). The broad scope of the overall process results from separating the oxidation and functionalization steps; by doing so, the scope of nucleophile encompasses those sensitive to direct oxidative functionalization. The high enantioselectivity of the overall process is achieved by developing an allylic oxidation that occurs without acid to form the linear isomer with high selectivity. These allylic functionalization processes are amenable to an iterative sequence leading to (1,n)-functionalized products with catalyst-controlled diastereo- and enantioselectivity. The utility of the method in the synthesis of biologically active molecules has been demonstrated.

  4. Safety Assessment of Alkyl PEG/PPG Ethers as Used in Cosmetics.

    PubMed

    Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2016-07-01

    The Cosmetic Ingredient Review (CIR) Expert Panel assessed the safety of 131 alkyl polyethylene glycol (PEG)/polypropylene glycol ethers as used in cosmetics, concluding that these ingredients are safe in the present practices of use and concentration described in this safety assessment when formulated to be nonirritating. Most of the alkyl PEG/PPG ethers included in this review are reported to function in cosmetics as surfactants, skin-conditioning agents, and/or emulsifying agents. The alkyl PEG/PPG ethers share very similar physiochemical properties as the alkyl PEG ethers, which were reviewed previously by the CIR Expert Panel and found safe when formulated to be nonirritating. The alkyl PEG ethers differ by the inclusion of PPG repeat units, which are used to fine-tune the surfactant properties of this group. The Panel relied heavily on data on analogous ingredients, extracted from the alkyl PEG ethers and PPG reports, when making its determination of safety.

  5. Discovery and identification of a series of alkyl decalin isomers in petroleum geological samples.

    PubMed

    Wang, Huitong; Zhang, Shuichang; Weng, Na; Zhang, Bin; Zhu, Guangyou; Liu, Lingyan

    2015-07-01

    The comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (GC × GC/TOFMS) has been used to characterize a crude oil and a source rock extract sample. During the process, a series of pairwise components between monocyclic alkanes and mono-aromatics have been discovered. After tentative assignments of decahydronaphthalene isomers, a series of alkyl decalin isomers have been synthesized and used for identification and validation of these petroleum compounds. From both the MS and chromatography information, these pairwise compounds were identified as 2-alkyl-decahydronaphthalenes and 1-alkyl-decahydronaphthalenes. The polarity of 1-alkyl-decahydronaphthalenes was stronger. Their long chain alkyl substituent groups may be due to bacterial transformation or different oil cracking events. This systematic profiling of alkyl-decahydronaphthalene isomers provides further understanding and recognition of these potential petroleum biomarkers.

  6. Safety Assessment of Alkyl PEG/PPG Ethers as Used in Cosmetics.

    PubMed

    Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2016-07-01

    The Cosmetic Ingredient Review (CIR) Expert Panel assessed the safety of 131 alkyl polyethylene glycol (PEG)/polypropylene glycol ethers as used in cosmetics, concluding that these ingredients are safe in the present practices of use and concentration described in this safety assessment when formulated to be nonirritating. Most of the alkyl PEG/PPG ethers included in this review are reported to function in cosmetics as surfactants, skin-conditioning agents, and/or emulsifying agents. The alkyl PEG/PPG ethers share very similar physiochemical properties as the alkyl PEG ethers, which were reviewed previously by the CIR Expert Panel and found safe when formulated to be nonirritating. The alkyl PEG ethers differ by the inclusion of PPG repeat units, which are used to fine-tune the surfactant properties of this group. The Panel relied heavily on data on analogous ingredients, extracted from the alkyl PEG ethers and PPG reports, when making its determination of safety. PMID:27383199

  7. Differences in sequence selectivity of DNA alkylation by isomeric intercalating aniline mustards.

    PubMed

    Prakash, A S; Denny, W A; Wakelin, L P

    1990-01-01

    Two DNA-targeted mustard derivatives, N,N-bis(2-chloroethyl)-4-(5-[9-acridinylamino]-pentamido)aniline and 4-(9-[acridinylamino]butyl 4-(N,N-bis[2-chloroethyl]-aminobenzamide, which are isomeric compounds where the mustard is linked to the DNA-binding 9-aminoacridine moiety by either a -CONH- or a -NHCO- group, show significant differences in the sequence selectivity of their alkylation of DNA. The CONH isomer is a more efficient alxylating agent than the NHCO compound by an order of magnitude, consistent with the larger electron release of the CONH group to the aniline ring. However, the pattern of alkylation by the two compounds is also very different, with the CONH isomer preferring alkylation of guanines adjacent to 3'- or 5'-adenines and cytosines (for example those in sequences 5'-CGC, 5'-AGC, 5'-CGG and 5'-AGA) while the isomeric NHCO compound shows preference for guanines in runs of Gs. In addition, both isomers alkylate 3'-adenines in runs of adenines. Both compounds also show completely different patterns of alkylation to their untargeted mustard counterparts, since 4-MeCONH-aniline mustard alkylates all guanines and adenines in runs of adenines, while 4-Me2NCO-aniline mustard fails to alkylate DNA at all. These differences in alkylation patterns between the CONH- and its isomeric NHCO- compounds and their relationships between the alkylation patterns of the isomers and their biological activities are discussed.

  8. Calculations concerning the reaction C + H3+ --> CH(+) + H2.

    PubMed

    Talbi, D; DeFrees, D J; Egolf, D A; Herbst, E

    1991-06-10

    The ion-molecule reaction C + H3+ --> CH(+) + H2 has not been studied in the laboratory but is thought to be important in the gas phase synthesis of organic molecules in dense interstellar clouds. We have studied this reaction theoretically by performing quantum chemical ab initio calculations on the potential surface. We find that there is no activation barrier to the reaction and that it proceeds smoothly to the first excited electronic state of CH+. The rate coefficient as a function of temperature can then be estimated using the proper long-range potentials. The rate coefficient at 10 K is calculated to be 2.9 x 10(-9) cm3 s-1.

  9. Alkyl Chlorides as Hydrogen Bond Acceptors

    SciTech Connect

    Nadas, Janos I; Vukovic, Sinisa; Hay, Benjamin

    2012-01-01

    To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

  10. Glycidol-carbohydrate hybrids: a new family of DNA alkylating agents.

    PubMed

    Toshima, Kazunobu; Okuno, Yukiko; Matsumura, Shuichi

    2003-10-01

    Novel and chiral glycidol-carbohydrate hybrids possessing an epoxy group as a DNA alkylating moiety were designed and synthesized. These artificial hybrids selectively alkylated DNA at the N-7 sites of the guanines and cleaved DNA without any additives. The binding ability of the glycidol was significantly enhanced by the attachment of the carbohydrate.

  11. Palladium-Catalyzed Heteroarylation and Concomitant ortho-Alkylation of Aryl Iodides.

    PubMed

    Lei, Chuanhu; Jin, Xiaojia; Zhou, Jianrong Steve

    2015-11-01

    Three-component couplings were achieved from common aryl halides, alkyl halides, and heteroarenes under palladium and norbornene co-catalysis. The reaction forges hindered aryl-heteroaryl bonds and introduces ortho-alkyl groups to aryl rings. Various heterocycles such as oxazoles, thiazoles and thiophenes underwent efficient coupling. The heteroarenes were deprotonated in situ by bases without the assistance of palladium catalysts.

  12. C-H/π-interaction-guided self-assembly in π-conjugated oligomers.

    PubMed

    Goel, Mahima; Jayakannan, Manickam

    2012-03-01

    We report CH/π hydrogen-bond-driven self-assembly in π-conjugated skeletons based on oligophenylenevinylenes (OPVs) and trace the origin of interactions at the molecular level by using single-crystal structures. OPVs were designed with appropriate pendants in the aromatic core and varied by hydrocarbon or fluorocarbon tails along the molecular axis. The roles of aromatic π-stack, van der Waals forces, fluorophobic effect and CH/π interactions were investigated on the theromotropic liquid crystallinity of OPV molecules. Single-crystal structures of hydrocarbon OPVs provided direct evidence for the existence of CH/π interactions between the π-ring (H-bond acceptor) and alkyl C-H (H-bond donor). The four important crystallographic parameters, d(c-x)=3.79 Å, θ=21.49°, φ=150.25° and d(Hp-x)=0.73 Å, matched in accordance with typical CH/π interactions. The CH/π interactions facilitate the close-packing of mesogens in x-y planes, which were further protruded along the c axis producing a lamellar structure. In the absence of CH/π interactions, van der Waals interactions drove the assembly towards a Schlieren nematic texture. Fluorocarbon OPVs exhibited smectic liquid-crystalline textures that further underwent Smectic A (SmA) to Smectic C (SmC) phase transitions with shrinkage up to 11%. The orientation and translational ordering of mesogens in the liquid-crystalline (LC) phases induced H- and J-type molecular arrangements in fluorocarbon and hydrocarbon OPVs, respectively. Upon photoexcitation, the H- and J-type molecular arrangements were found to emit a blue or yellowish/green colour. Time-resolved fluorescence decay measurements confirmed longer lifetimes for H-type smectic OPVs relative to that of loosely packed one-dimensional nematic hydrocarbon-tailed OPVs. PMID:22298381

  13. Palladium-Catalyzed Deaminative Phenanthridinone Synthesis from Aniline via C-H Bond Activation.

    PubMed

    Yedage, Subhash L; Bhanage, Bhalchandra M

    2016-05-20

    This work reports palladium-catalyzed phenanthridinone synthesis using the coupling of aniline and amide by formation of C-C and C-N bonds in a one-pot fashion via dual C-H bond activation. It involves simultaneous cleavage of four bonds and the formation of two new bonds. The present protocol is ligand-free, takes place under mild reaction conditions, and is environmentally benign as nitrogen gas and water are the only side products. This transformation demonstrates a broad range of aniline and amide substrates with different functional groups and has been scaled up to gram level. PMID:27088815

  14. Palladium-Catalyzed Deaminative Phenanthridinone Synthesis from Aniline via C-H Bond Activation.

    PubMed

    Yedage, Subhash L; Bhanage, Bhalchandra M

    2016-05-20

    This work reports palladium-catalyzed phenanthridinone synthesis using the coupling of aniline and amide by formation of C-C and C-N bonds in a one-pot fashion via dual C-H bond activation. It involves simultaneous cleavage of four bonds and the formation of two new bonds. The present protocol is ligand-free, takes place under mild reaction conditions, and is environmentally benign as nitrogen gas and water are the only side products. This transformation demonstrates a broad range of aniline and amide substrates with different functional groups and has been scaled up to gram level.

  15. Copper-Catalyzed Intramolecular Benzylic C-H Amination for the Synthesis of Isoindolinones.

    PubMed

    Yamamoto, Chiaki; Takamatsu, Kazutaka; Hirano, Koji; Miura, Masahiro

    2016-09-01

    A copper-catalyzed intramolecular amination occurs at the benzylic C-H of 2-methylbenzamides to deliver the corresponding isoindolinones of great interest in medicinal chemistry. The mild and abundant MnO2 works well as a terminal oxidant, and the reaction proceeds smoothly under potentially explosive organic peroxide-free conditions. Additionally, the directing-group-dependent divergent mechanisms are proposed: 8-aminoquinoline-containing benzamides include a Cu-mediated organometallic pathway whereas an aminyl radical-promoted Hofmann-Loffler-Freytag (HLF)-type mechanism can be operative in the case of N-naphthyl-substituted substrates. PMID:27504671

  16. Chelation-Assisted Copper-Mediated Direct Acetylamination of 2-Arylpyridine C-H Bonds with Cyanate Salts.

    PubMed

    Kianmehr, Ebrahim; Amiri Lomedasht, Yousef; Faghih, Nasser; Khan, Khalid Mohammed

    2016-07-15

    In this study, the coupling of 2-phenylpyridine derivatives and potassium cyanate through C-H bond functionalization in the presence of a copper salt is developed for the first time. By this protocol, various heteroarylated acetanilide derivatives are synthesized in good yields. 2-Phenylpyridines containing electron-donating and -withdrawing groups appear to be well-tolerated by this transformation. PMID:27295365

  17. Structural features of a series of S-alkylated and non-S-alkylated aminothiolate nickel(II) complexes

    NASA Astrophysics Data System (ADS)

    Chohan, B. S.

    2014-12-01

    The structural aspects of a family of S-alkylated complexes, generated by reacting iodoacetamide or iodoethanol with two mononuclear Ni(II) diaminodithiolate complexes are discussed. The S-alkylation reactions were investigated with particular attention paid to the size of the chelate ring that straps the N,N'-methylamine donors. In one complex the N-methyl groups are cis to each other and in the other they are trans. Both complexes undergo S-alkylation with two equivalents of either reagent, that coordinates through the pendant oxygen to the Ni(II), forming dications with an N2S2O2 ligand donor set. Crystal structures of [NiC12H26N4O2S2]I2 · MeOH, [NiC12H28N2O2S2]I2, and [NiC13H30N2O2S2]I2 · 1/2 MeOH, are determined by single crystal X-ray analysis. The N-methyl groups in each of the alkylated derivatives are trans to each other, suggesting that the cis configuration is highly unfavored for such complexes in octahedral conformation. Crystal packing data shows that each of the alkylated complexes interacts closely with the iodide counterions, and with solvent if present; some of these interactions include H-bonds. Only the iodoacetamide derivative shows any significant interaction with a neighboring molecule.

  18. Aromatic C-H Activation in the Triplet Excited State of Cyclometalated Platinum(II) Complexes Using Visible Light.

    PubMed

    Juliá, Fabio; González-Herrero, Pablo

    2016-04-27

    The visible-light driven cyclometalation of arene substrates containing an N-donor heteroaromatic moiety as directing group by monocyclometalated Pt(II) complexes is reported. Precursors of the type [PtMe(C^N)(N^CH)], where N^CH is 2-phenylpyridine (ppyH) or related compunds with diverse electronic properties and C^N is the corresponding cyclometalated ligand, afford homoleptic cis-[Pt(C^N)2] complexes upon irradiation with blue LEDs at room temperature with evolution of methane. Heteroleptic derivatives cis-[Pt(ppy)(C'^N')] are obtained analogously from [PtMe(ppy)(N'^C'H)], where N'^C'H represents an extended set of heteroaromatic compounds. Experimental and computational studies demonstrate an unprecedented C-H oxidative addition, which is initiated by a triplet excited state of metal-to-ligand charge-transfer (MLCT) character and leads to a detectable Pt(IV) methyl hydride intermediate.

  19. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  20. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  1. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  2. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  3. 5-Position-selective C-H trifluoromethylation of 8-aminoquinoline derivatives.

    PubMed

    Kuninobu, Yoichiro; Nishi, Mitsumi; Kanai, Motomu

    2016-09-14

    We developed a copper-catalyzed 5-position-selective C-H trifluoromethylation of 8-aminoquinoline derivatives. The reaction proceeded with high functional group tolerance under mild conditions. In the case of quinolines with an amide, carbamate, urea, or sulfonamide group at the 8-position of quinoline moieties, a radical scavenger experiment indicated that the reaction proceeded via a radical pathway. The protecting group of an 8-amidoquinoline derivative could be removed by hydrolysis. On the other hand, the trifluoromethylation of 8-aminoquinolines was also promoted by other Lewis acids as well as a copper catalyst and proceeded even in the presence of a radical scavenger. These results indicated that the trifluoromethylation of 8-aminoquinolines proceeded via a Friedel-Crafts-type reaction. Interestingly, the copper salt works as either a catalyst for the formation of a CF3 radical or a Lewis acid to promote a Friedel-Crafts-type reaction, depending on the substrate. PMID:27506919

  4. Vanadium-catalyzed oxidative Strecker reaction: α-C-H cyanation of para-methoxyphenyl (PMP)-protected primary amines.

    PubMed

    Zhu, Chen; Xia, Ji-Bao; Chen, Chuo

    2014-01-01

    We describe an oxidative Strecker reaction that allows for direct cyanation of para-methoxyphenyl (PMP)-protected primary amines. A vanadium(V) complex was used as the catalyst and TBHP as the oxidant. The cyanation occurs at the α-C position bearing either an alkyl or an aromatic group. This method provides a direct access to α-aminonitrile from amines with one-carbon extension.

  5. Oil compositions containing alkyl amine or alkyl mercaptan derivatives of copolymers of an alpha olefin or an alkyl vinyl ether

    SciTech Connect

    Le, H.T.

    1990-02-13

    This patent describes an oil composition. It comprises a major amount of an oil selected from a crude oil or fuel oil and a minor amount of an alkyl amine or alkyl mercaptan derivative of an alpha olefin or alkyl vinyl ether and an unsaturated alpha, beta-dicarboxylic compound copolymer having pour point depressant ;properties. The copolymer comprising the reaction product of an alpha olefin having from about 2 to about 30 carbon atoms or mixtures of alpha olefins having from about 2 to about 30 carbon atoms or an alkyl vinyl ether or mixture of alkyl vinyl ethers.

  6. Natural and bioremediated selective degradation of polycyclic aromatic alkyl isomers in oil-contaminated soils

    SciTech Connect

    Sauer, T.C.; McCarthy, K.; Uhler, A.; Porta, A.

    1995-12-31

    In studies where 2- to 6-ring polycyclic aromatic hydrocarbons (PAHs) are determined as part of characterizing released oil constituents in environmental samples, the changes in composition of PAHs from weathering (e.g., evaporation, dissolution) and biodegradation are most often represented by PAH alkyl homologue distributions. Concentrations of PAH alkyl groups are the sum of individual PAH isomers of similar carbon number; such as for C2-naphthalenes, the C2 alkyl group consists of dimethyl and ethyl substitutions on the parent naphthalene. In weathering and degradation studies, the changes in relative concentration of the individual isomers within an alkyl group are rarely reported. In a field study of oiled soils, the authors looked at the selective losses, for a period of a year, of individual PAH alkyl isomers that occur both naturally by weathering processes and through the use of bioremediation technology. Results showed that decreases in alkyl group concentrations were not always represented by similar losses of each isomer in the alkyl group, but were often due to the preferential or selective loss of certain isomers in the group.

  7. The effect of alkylating agents on model supported metal clusters

    SciTech Connect

    Erdem-Senatalar, A.; Blackmond, D.G.; Wender, I. . Dept. of Chemical and Petroleum Engineering); Oukaci, R. )

    1988-01-01

    Interactions between model supported metal clusters and alkylating agents were studied in an effort to understand a novel chemical trapping technique developed for identifying species adsorbed on catalyst surfaces. It was found that these interactions are more complex than had previously been suggested. Studies were completed using deuterium-labeled dimethyl sulfate (DMS), (CH{sub 3}){sub 2}SO{sub 4}, as a trapping agent to interact with the supported metal cluster ethylidyne tricobalt enneacarbonyl. Results showed that oxygenated products formed during the trapping reaction contained {minus}OCD{sub 3} groups from the DMS, indicating that the interaction was not a simple alkylation. 18 refs., 1 fig., 3 tabs.

  8. Preparation and reactivity of macrocyclic rhodium(III) alkyl complexes

    SciTech Connect

    Carraher, Jack M.; Ellern, Arkady; Bakac, Andreja

    2013-09-21

    Macrocyclic rhodium(II) complexes LRh(H2O)(2+) (L = L-1 = cyclam and L-2 = meso-Me-6-cyclam) react with alkyl hydroperoxides RC(CH3)(2)OOH to generate the corresponding rhodium(III) alkyls L(H2O)RhR2+ (R = CH3, C2H5, PhCH2). Methyl and benzyl complexes can also be prepared by bimolecular group transfer from alkyl cobaloximes (dmgH)(2)(H2O) CoR and (dmgBF(2))(2)(H2O) CoR (R = CH3, PhCH2) to LRh(H2O)(2+). The new complexes were characterized by solution NMR and by crystal structure analysis. They exhibit great stability in aqueous solution at room temperature, but undergo efficient Rh-C bond cleavage upon photolysis. (C) 2013 Elsevier B.V. All rights reserved.

  9. Safety Assessment of Alkyl Ethylhexanoates as Used in Cosmetics.

    PubMed

    Fiume, Monice; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-01-01

    The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 16 alkyl ethylhexanoates for use in cosmetics, concluding that these ingredients are safe in cosmetic formulations in the present practices of use and concentrations when formulated to be nonirritating. The alkyl ethylhexanoates primarily function as skin-conditioning agents in cosmetics. The highest concentration of use reported for any of the alkyl ethylhexanoates is 77.3% cetyl ethylhexanoate in rinse-off formulations used near the eye, and the highest leave-on use reported is 52% cetyl ethylhexanoate in lipstick formulations. The Panel reviewed available animal and clinical data related to these ingredients, and the similarities in structure, properties, functions, and uses of ingredients from previous CIR assessments on constituent alcohols that allowed for extrapolation of the available toxicological data to assess the safety of the entire group.

  10. Safety Assessment of Alkyl Ethylhexanoates as Used in Cosmetics.

    PubMed

    Fiume, Monice; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-01-01

    The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 16 alkyl ethylhexanoates for use in cosmetics, concluding that these ingredients are safe in cosmetic formulations in the present practices of use and concentrations when formulated to be nonirritating. The alkyl ethylhexanoates primarily function as skin-conditioning agents in cosmetics. The highest concentration of use reported for any of the alkyl ethylhexanoates is 77.3% cetyl ethylhexanoate in rinse-off formulations used near the eye, and the highest leave-on use reported is 52% cetyl ethylhexanoate in lipstick formulations. The Panel reviewed available animal and clinical data related to these ingredients, and the similarities in structure, properties, functions, and uses of ingredients from previous CIR assessments on constituent alcohols that allowed for extrapolation of the available toxicological data to assess the safety of the entire group. PMID:26684798

  11. Local network structure of a-SiC:H and its correlation with dielectric function

    SciTech Connect

    Kageyama, Shota; Matsuki, Nobuyuki; Fujiwara, Hiroyuki

    2013-12-21

    The microscopic disordered structures of hydrogenated amorphous silicon carbide (a-Si{sub 1−x}C{sub x}:H) layers with different carbon contents have been determined based on the correlations between the dielectric function in the ultraviolet/visible region and the local bonding states studied by high-sensitivity infrared attenuated total reflection spectroscopy. We find that the microscopic structure of the a-Si{sub 1−x}C{sub x}:H layers fabricated by plasma-enhanced chemical vapor deposition shows a sharp structural transition at a boundary of x = 6.3 at. %. In the regime of x ≤ 6.3 at. %, (i) the amplitude of the a-SiC:H dielectric function reduces and (ii) the SiH{sub 2} content increases drastically with x, even though most of the C atoms are introduced into the tetrahedral sites without bonding with H. In the regime of x > 6.3 at. %, on the other hand, (i) the amplitude of the dielectric function reduces further and (ii) the concentration of the sp{sup 3} CH{sub n} (n = 2,3) groups increases. Moreover, we obtained the direct evidence that the sp{sup 2} C bonding state in the a-SiC matrix exists in the configuration of C = CH{sub 2} and the generation of the graphite-like C = CH{sub 2} unit suppresses the band gap widening significantly. At high C contents of x > 6.3 at. %, the a-SiC:H layers show quite porous structures due to the formation of microvoids terminated with the SiH{sub 2}/CH{sub n} groups. By taking the SiH{sub 2}/CH{sub n} microvoid generation in the network and the high-energy shift of the dielectric function by the local bonding states into account, the a-SiC:H dielectric function model has been established. From the analysis using this model, we have confirmed that the a-SiC:H optical properties in the ultraviolet/visible region are determined almost completely by the local network structures.

  12. Students' Understanding of Alkyl Halide Reactions in Undergraduate Organic Chemistry

    ERIC Educational Resources Information Center

    Cruz-Ramirez de Arellano, Daniel

    2013-01-01

    Organic chemistry is an essential subject for many undergraduate students completing degrees in science, engineering, and pre-professional programs. However, students often struggle with the concepts and skills required to successfully solve organic chemistry exercises. Since alkyl halides are traditionally the first functional group that is…

  13. Synthesis of 3-alkyl naphthalenes as novel estrogen receptor ligands

    SciTech Connect

    Fang, Jing; Akwabi-Ameyaw, Adwoa; Britton, Jonathan E.; Katamreddy, Subba R.; Navas III, Frank; Miller, Aaron B.; Williams, Shawn P.; Gray, David W.; Orband-Miller, Lisa A.; Shearin, Jean; Heyer, Dennis

    2009-06-24

    A series of estrogen receptor ligands based on a 3-alkyl naphthalene scaffold was synthesized using an intramolecular enolate-alkyne cycloaromatization as the key step. Several of these compounds bearing a C6-OH group were shown to be high affinity ligands. All compounds had similar ER{alpha} and ER{beta} binding affinity ranging from micromolar to low nanomolar.

  14. Rhodium-Catalyzed C-C Bond Formation via Heteroatom-Directed C-H Bond Activation

    SciTech Connect

    Colby, Denise; Bergman, Robert; Ellman, Jonathan

    2010-05-13

    Once considered the 'holy grail' of organometallic chemistry, synthetically useful reactions employing C-H bond activation have increasingly been developed and applied to natural product and drug synthesis over the past decade. The ubiquity and relative low cost of hydrocarbons makes C-H bond functionalization an attractive alternative to classical C-C bond forming reactions such as cross-coupling, which require organohalides and organometallic reagents. In addition to providing an atom economical alternative to standard cross - coupling strategies, C-H bond functionalization also reduces the production of toxic by-products, thereby contributing to the growing field of reactions with decreased environmental impact. In the area of C-C bond forming reactions that proceed via a C-H activation mechanism, rhodium catalysts stand out for their functional group tolerance and wide range of synthetic utility. Over the course of the last decade, many Rh-catalyzed methods for heteroatom-directed C-H bond functionalization have been reported and will be the focus of this review. Material appearing in the literature prior to 2001 has been reviewed previously and will only be introduced as background when necessary. The synthesis of complex molecules from relatively simple precursors has long been a goal for many organic chemists. The ability to selectively functionalize a molecule with minimal pre-activation can streamline syntheses and expand the opportunities to explore the utility of complex molecules in areas ranging from the pharmaceutical industry to materials science. Indeed, the issue of selectivity is paramount in the development of all C-H bond functionalization methods. Several groups have developed elegant approaches towards achieving selectivity in molecules that possess many sterically and electronically similar C-H bonds. Many of these approaches are discussed in detail in the accompanying articles in this special issue of Chemical Reviews. One approach that has

  15. Chiral Brønsted Base-Promoted Nitroalkane Alkylation: Enantioselective Synthesis of sec-Alkyl-3-Substituted Indoles

    PubMed Central

    Dobish, Mark C.; Johnston, Jeffrey N.

    2010-01-01

    A Brønsted base-catalyzed reaction of nitroalkanes with alkyl electrophiles provides indole heterocycles substituted at C3 bearing a sec-alkyl group with good enantioselectivity (up to 90% ee). Denitration by hydrogenolysis provides a product with equally high ee. An indolenine intermediate is implicated in the addition step, and surprisingly, water cosolvent was found to have a beneficial effect in this step, leading to a one-pot protocol for elimination/enantioselective addition using PBAM, a bis(amidine) chiral nonracemic base. PMID:21090654

  16. R.E.A.C.H. to Teach: Making Patient and Family Education "Stick".

    PubMed

    Cutilli, Carolyn Crane

    2016-01-01

    Healthcare professionals teach patients and families about their health every day. Regulatory and accreditation organizations mandate patient and family education to promote better health outcomes. And recently, financial rewards for healthcare organizations are being tied to patient satisfaction (Hospital Consumer Assessment of Healthcare Providers and Systems-HCAHPS). A University of Pennsylvania Health System group of staff and patients, devoted to excellence in patient and family education, developed the graphic "R.E.A.C.H. to Teach." The purpose of the graphic is to make evidence-based practice (EBP) for patient and family education "stick" with staff. The group used concepts from the marketing book, Made to Stick, to demonstrate how to develop effective staff and patient and family education. Ideas (education) that survive ("stick") have the following attributes: simple, unexpected, concrete, credible, emotional, and narrative (story). This article demonstrates how to apply these principles and EBP to patient and family education. PMID:27441879

  17. Transition Metal-Catalyzed Carbonylative C-H Bond Functionalization of Arenes and C(sp(3))-H Bond of Alkanes.

    PubMed

    Gadge, Sandip T; Gautam, Prashant; Bhanage, Bhalchandra M

    2016-04-01

    In this article, we present the progress made in the area of carbonylative C-H functionalization, with special emphasis on arenes and alkanes. The importance of directing group assistance and C-H functionalization using CO surrogates is also included. The budding development in the area of transition metal-catalyzed C(sp(3))-H activation makes us feel it necessary to file a summary on the past, as well as current, contributions and a prospective outlook on the transition metal-catalyzed carbonylative transformation of C-H bonds, which is the focus of this review. PMID:26969501

  18. Radioiodination of Aryl-Alkyl Cyclic Sulfates

    PubMed Central

    Mushti, Chandra; Papisov, Mikhail I.

    2015-01-01

    Among the currently available positron emitters suitable for Positron Emission Tomography (PET), 124I has the longest physical half-life (4.2 days). The long half-life and well-investigated behavior of iodine in vivo makes 124I very attractive for pharmacological studies. In this communication, we describe a simple yet effective method for the synthesis of novel 124I labeled compounds intended for PET imaging of arylsulfatase activity in vivo. Arylsulfatases have important biological functions, and genetic deficiencies of such functions require pharmacological replacement, the efficacy of which must be properly and non-invasively evaluated. These enzymes, even though their natural substrates are mostly of aliphatic nature, hydrolyze phenolic sulfates to phenol and sulfuric acid. The availability of [124I]iodinated substrates is expected to provide a PET-based method for measuring their activity in vivo. The currently available methods of synthesis of iodinated arylsulfates usually require either introducing of a protected sulfate ester early in the synthesis or introduction of sulfate group at the end of synthesis in a separate step. The described method gives the desired product in one step from an aryl-alkyl cyclic sulfate. When treated with iodide, the source cyclic sulfate opens with substitution of iodide at the alkyl center and gives the desired arylsulfate monoester. PMID:23135631

  19. Transition-Metal-Catalyzed Direct Addition of Aryl C-H Bonds to Unsaturated Electrophiles.

    PubMed

    Shi, Xian-Ying; Han, Wen-Jing; Li, Chao-Jun

    2016-06-01

    The direct addition of Csp(2) -H bonds onto polar C=C, C=O, and C=N bonds is both synthetically and mechanistically important, because using aromatic C-H substrates in place of organometallic reagents provides a more direct and atom-economical alternative to many important compounds without the pre-generation of organometallic compounds from stoichiometric halides and the unavoidable generation of stoichiometric metal halide waste. In this account, we summarize our contributions to the transition-metal-catalyzed addition of aromatic C-H bonds to polar C=C, C=O, and C=N bonds via directing-group-assisted regiospecific reactions. These synthetic methods provide efficient access to benzylic alcohols, alkylbenzenes, 3-substituted phthalides, N-substituted phthalimides, N-aryl benzamides, and indene derivatives from commercially available reagents. It is worth noting that valuable heterocycles such as 3-substituted phthalides and N-substituted phthalimides can be obtained in one step by this approach. PMID:27059538

  20. Transition-Metal-Catalyzed Redox-Neutral and Redox-Green C-H Bond Functionalization.

    PubMed

    Wang, Hongli; Huang, Hanmin

    2016-08-01

    Transition-metal-catalyzed C-H bond functionalization has become one of the most promising strategies to prepare complex molecules from simple precursors. However, the utilization of environmentally unfriendly oxidants in the oxidative C-H bond functionalization reactions reduces their potential applications in organic synthesis. This account describes our recent efforts in the development of a redox-neutral C-H bond functionalization strategy for direct addition of inert C-H bonds to unsaturated double bonds and a redox-green C-H bond functionalization strategy for realization of oxidative C-H functionalization with O2 as the sole oxidant, aiming to circumvent the problems posed by utilizing environmentally unfriendly oxidants. In principle, these redox-neutral and redox-green strategies pave the way for establishing new environmentally benign transition-metal-catalyzed C-H bond functionalization strategies.

  1. Transition-Metal-Catalyzed Redox-Neutral and Redox-Green C-H Bond Functionalization.

    PubMed

    Wang, Hongli; Huang, Hanmin

    2016-08-01

    Transition-metal-catalyzed C-H bond functionalization has become one of the most promising strategies to prepare complex molecules from simple precursors. However, the utilization of environmentally unfriendly oxidants in the oxidative C-H bond functionalization reactions reduces their potential applications in organic synthesis. This account describes our recent efforts in the development of a redox-neutral C-H bond functionalization strategy for direct addition of inert C-H bonds to unsaturated double bonds and a redox-green C-H bond functionalization strategy for realization of oxidative C-H functionalization with O2 as the sole oxidant, aiming to circumvent the problems posed by utilizing environmentally unfriendly oxidants. In principle, these redox-neutral and redox-green strategies pave the way for establishing new environmentally benign transition-metal-catalyzed C-H bond functionalization strategies. PMID:27258190

  2. Enzyme-controlled nitrogen-atom transfer enables regiodivergent C-H amination.

    PubMed

    Hyster, Todd K; Farwell, Christopher C; Buller, Andrew R; McIntosh, John A; Arnold, Frances H

    2014-11-01

    We recently demonstrated that variants of cytochrome P450BM3 (CYP102A1) catalyze the insertion of nitrogen species into benzylic C-H bonds to form new C-N bonds. An outstanding challenge in the field of C-H amination is catalyst-controlled regioselectivity. Here, we report two engineered variants of P450BM3 that provide divergent regioselectivity for C-H amination-one favoring amination of benzylic C-H bonds and the other favoring homo-benzylic C-H bonds. The two variants provide nearly identical kinetic isotope effect values (2.8-3.0), suggesting that C-H abstraction is rate-limiting. The 2.66-Å crystal structure of the most active enzyme suggests that the engineered active site can preorganize the substrate for reactivity. We hypothesize that the enzyme controls regioselectivity through localization of a single C-H bond close to the iron nitrenoid.

  3. Methods of making alkyl esters

    SciTech Connect

    Elliott, Brian

    2010-08-03

    A method comprising contacting an alcohol, a feed comprising one or more glycerides and equal to or greater than 2 wt % of one or more free fatty acids, and a solid acid catalyst, a nanostructured polymer catalyst, or a sulfated zirconia catalyst in one or more reactors, and recovering from the one or more reactors an effluent comprising equal to or greater than about 75 wt % alkyl ester and equal to or less than about 5 wt % glyceride.

  4. Nickel-Catalyzed Dimerization and Alkylarylation of 1,3-Dienes with Alkyl Fluorides and Aryl Grignard Reagents.

    PubMed

    Iwasaki, Takanori; Min, Xin; Fukuoka, Asuka; Kuniyasu, Hitoshi; Kambe, Nobuaki

    2016-04-25

    In the presence of a nickel catalyst, 1,3-butadiene undergoes selective dimerization and alkylarylation with alkyl fluorides and aryl Grignard reagents to give 1,6-octadienes with alkyl and aryl groups at the 3- and 8-positions, respectively, by the consecutive formation of three carbon-carbon bonds. The formation of an anionic nickel complex plays an important role in forming C-C bonds with alkyl fluorides. PMID:26938137

  5. Polycyclic Aromatic Acids Are Primary Metabolites of Alkyl-PAHs-A Case Study with Nereis diversicolor.

    PubMed

    Malmquist, Linus M V; Selck, Henriette; Jørgensen, Kåre B; Christensen, Jan H

    2015-05-01

    Although concentrations of alkylated polycyclic aromatic hydrocarbons (alkyl-PAHs) in oil-contaminated sediments are higher than those of unsubstituted PAHs, only little attention has been given to metabolism and ecotoxicity of alkyl-PAHs. In this study we demonstrated that metabolism of alkyl-PAHs primarily forms polycyclic aromatic acids (PAAs). We generalize this to other alkyl-PAHs, based on literature and the present study of the metabolism of 1-methylphenanthrene, 3,6-dimethylphenanthrene, and 1-, 2-, 3-, and 6-methylchrysene related to their unsubstituted parent PAHs. Also, we observed that body burdens and production of PAAs was related to the position of the methyl group, showing the same isomer specific preferences as for microbial degradation of alkyl-PAHs. We detected a high production of PAAs, and larger metabolism of alkyl-PAHs than their unsubstituted parent PAHs. We therefore propose that carboxylic acid metabolites of alkyl-PAHs have the potential of constituting a new class of contaminants in marine waters that needs attention in relation to ecological risk assessments.

  6. PREPARATION OF ALKYL PYROPHOSPHATE EXTRACTANTS

    DOEpatents

    Levine, C.A.; Skiens, W.E.; Moore, G.R.

    1960-08-01

    A process for providing superior solvent extractants for metal recovery processes is given wherein the extractant comprises an alkyl pyrophosphoric acid ester dissolved in an organic solvent diluent. Finely divided solid P/sub 2/O/ sub 5/ is slurried in an organic solvent-diluent selected from organic solvents such as kerosene, benzene, chlorobenzene, toluene, etc. An alcohol selected from the higher alcohols having 4 to 17 carbon atoms. e.g.. hexanol-1. heptanol-3, octanol-1. 2.6-dimethyl-heptanol-4, and decanol-1, is rapidly added to the P/sub 2/O/sub 5/ slurry in the amount of about 2 moles of alcohol to 1 mole of P/sub 2/ O/sub 5/. The temperature is maintained below about 110 deg C during the course of the P/sub 2/O/sub 5/-alcohol reaction. An alkyl pyrophosphate extractant compound is formed as a consequence of the reaction process. The alkyl pyrophosphate solvent-diluent extractant phase is useful in solvent extraction metal recovery processes.

  7. Hydrogen shuttling: synthesis and reactivity of a 14-electron iridium complex featuring a bis(alkyl) tethered N-heterocyclic carbene ligand.

    PubMed

    Tang, Christina Y; Phillips, Nicholas; Kelly, Michael J; Aldridge, Simon

    2012-12-21

    Solvent dependent double C-H activation in an Ir(NHC)(2) system generates an agostically stabilized 14-electron complex featuring a face-capping bis(alkyl) tethered NHC ligand [NHC = N-heterocyclic carbene]. These activation processes are reversible, and the resulting ligand-derived hydrogen shuttle can be applied to the dehydrogenation of BN-containing substrates. PMID:23128505

  8. The rate of intramolecular vibrational energy relaxation of the fundamental C-H stretch in (CF3)3C-C [equivalent] C-H

    NASA Astrophysics Data System (ADS)

    Gambogi, Joan E.; Lehmann, Kevin K.; Pate, Brooks H.; Scoles, Giacinto; Yang, Xueming

    1993-01-01

    The high resolution spectrum of the fundamental C-H stretch in (CF3)3C-C≡C-H has been measured using optothermal detection of a collimated molecular beam. Only the Q branch was resolvable and was fit to a Lorentzian with a full width at half maximum of 2.76 GHz, corresponding to an IVR lifetime of 60 ps. The decrease in lifetime in comparison to (CH3)3C-C≡C-H is thought to be due to strong mixing between the C-F stretches and bends and the backbone C-C stretches and bends.

  9. N-Alkyl-, 1-C-Alkyl-, and 5-C-Alkyl-1,5-dideoxy-1,5-imino-(L)-ribitols as Galactosidase Inhibitors.

    PubMed

    Front, Sophie; Gallienne, Estelle; Charollais-Thoenig, Julie; Demotz, Stéphane; Martin, Olivier R

    2016-01-01

    A series of 1,5-dideoxy-1,5-imino-(l)-ribitol (DIR) derivatives carrying alkyl or functionalized alkyl groups were prepared and investigated as glycosidase inhibitors. These compounds were designed as simplified 4-epi-isofagomine (4-epi-IFG) mimics and were expected to behave as selective inhibitors of β-galactosidases. All compounds were indeed found to be highly selective for β-galactosidases versus α-glycosidases, as they generally did not inhibit coffee bean α-galactosidase or other α-glycosidases. Some compounds were also found to be inhibitors of almond β-glucosidase. The N-alkyl DIR derivatives were only modest inhibitors of bovine β-galactosidase, with IC50 values in the 30-700 μM range. Likewise, imino-L-ribitol substituted at the C1 position was found to be a weak inhibitor of this enzyme. In contrast, alkyl substitution at C5 resulted in enhanced β-galactosidase inhibitory activity by a factor of up to 1000, with at least six carbon atoms in the alkyl substituent. Remarkably, the 'pseudo-anomeric' configuration in this series does not appear to play a role. Human lysosomal β-galactosidase from leukocyte lysate was, however, poorly inhibited by all iminoribitol derivatives tested (IC50 values in the 100 μM range), while 4-epi-IFG was a good inhibitor of this enzyme. Two compounds were evaluated as pharmacological chaperones for a GM1-gangliosidosis cell line (R301Q mutation) and were found to enhance the mutant enzyme activity by factors up to 2.7-fold.

  10. Electrophilic, Ambiphilic, and Nucleophilic C-H bond Activation. Understanding the electronic continuum of C-H bond activation through transition-state and reaction pathway interaction energy decompositions

    SciTech Connect

    Ess, Daniel H.; Goddard, William A.; Periana, Roy A.

    2010-10-29

    The potential energy and interaction energy profiles for metal- and metal-ligand-mediated alkane C-H bond activation were explored using B3LYP density functional theory (DFT) and the absolutely localized molecular orbital energy decomposition analysis (ALMO-EDA). The set of complexes explored range from late transition metal group 10 (Pt and Pd) and group 11 (Au) metal centers to group 7-9 (Ir, Rh, Ru, and W) metal centers as well as a group 3 Sc complex. The coordination geometries, electron metal count (d8, d6, d4, and d0), and ligands (N-heterocycles, O-donor, phosphine, and Cp*) are also diverse. Quantitative analysis using ALMO-EDA of both directions of charge-transfer stabilization (occupied to unoccupied orbital stabilization) energies between the metal-ligand fragment and the coordinated C-H bond in the transition state for cleavage of the C-H bond allows classification of C-H activation reactions as electrophilic, ambiphilic, or nucleophilic on the basis of the net direction of charge-transfer energy stabilization. This bonding pattern transcends any specific mechanistic or bonding paradigm, such as oxidative addition, σ-bond metathesis, or substitution. Late transition metals such as Au(III), Pt(II), Pd(II), and Rh(III) metal centers with N-heterocycle, halide, or O-donor ligands show electrophilically dominated reaction profiles with forward charge-transfer from the C-H bond to the metal, leading to more stabilization than reverse charge transfer from the metal to the C-H bond. Transition states and reaction profiles for d6 Ru(II) and Ir(III) metals with Tp and acac ligands were found to have nearly equal forward and reverse charge-transfer energy stabilization. This ambiphilic region also includes the classically labeled electrophilic cationic species Cp*(PMe3)Ir(Me). Nucleophilic character, where the metal to C-H bond charge-transfer interaction is most stabilizing, was found in

  11. Matching plasmon resonances to the C=C and C-H bonds in estradiol

    NASA Astrophysics Data System (ADS)

    Mbomson, Ifeoma G.; McMeekin, Scott; De La Rue, Richard; Johnson, Nigel P.

    2015-03-01

    We tune nanoantennas to resonate within mid-infrared wavelengths to match the vibrational resonances of C=C and C-H of the hormone estradiol. Modelling and fabrication of the nanoantennas produce plasmon resonances between 2 μm to 7 μm. The hormone estradiol was dissolved in ethanol and evaporated, leaving thickness of a few hundreds of nanometres on top of gold asymmetric split H-like shaped on a fused silica substrate. The reflectance was measured and a red-shift is recorded from the resonators plasmonic peaks. Fourier transform infrared spectroscopy is use to observe enhanced spectra of the stretching modes for the analyte which belongs to alkenyl biochemical group.

  12. Total Synthesis of Verruculogen and Fumitremorgin A Enabled by Ligand-Controlled C-H Borylation.

    PubMed

    Feng, Yu; Holte, Dane; Zoller, Jochen; Umemiya, Shigenobu; Simke, Leah R; Baran, Phil S

    2015-08-19

    Verruculogen and fumitremorgin A are bioactive alkaloids that contain a unique eight-membered endoperoxide. Although related natural products such as fumitremorgins B and C have been previously synthesized, we report the first synthesis of the more complex, endoperoxide-containing members of this family. A concise route to verruculogen and fumitremorgin A relied not only on a hydroperoxide/indole hemiaminal cyclization, but also on the ability to access the seemingly simple starting material, 6-methoxytryptophan. An iridium-catalyzed C-H borylation/Chan-Lam procedure guided by an N-TIPS group enabled the conversion of a tryptophan derivative into a 6-methoxytryptophan derivative, proving to be a general way to functionalize the C6 position of an N,C3-disubstituted indole for the synthesis of indole-containing natural products and pharmaceuticals. PMID:26256033

  13. Bimetallic oxidative addition involving radical intermediates in nickel-catalyzed alkyl-alkyl Kumada coupling reactions.

    PubMed

    Breitenfeld, Jan; Ruiz, Jesus; Wodrich, Matthew D; Hu, Xile

    2013-08-14

    Many nickel-based catalysts have been reported for cross-coupling reactions of nonactivated alkyl halides. The mechanistic understanding of these reactions is still primitive. Here we report a mechanistic study of alkyl-alkyl Kumada coupling catalyzed by a preformed nickel(II) pincer complex ([(N2N)Ni-Cl]). The coupling proceeds through a radical process, involving two nickel centers for the oxidative addition of alkyl halide. The catalysis is second-order in Grignard reagent, first-order in catalyst, and zero-order in alkyl halide. A transient species, [(N2N)Ni-alkyl(2)](alkyl(2)-MgCl), is identified as the key intermediate responsible for the activation of alkyl halide, the formation of which is the turnover-determining step of the catalysis.

  14. Bimetallic oxidative addition involving radical intermediates in nickel-catalyzed alkyl-alkyl Kumada coupling reactions.

    PubMed

    Breitenfeld, Jan; Ruiz, Jesus; Wodrich, Matthew D; Hu, Xile

    2013-08-14

    Many nickel-based catalysts have been reported for cross-coupling reactions of nonactivated alkyl halides. The mechanistic understanding of these reactions is still primitive. Here we report a mechanistic study of alkyl-alkyl Kumada coupling catalyzed by a preformed nickel(II) pincer complex ([(N2N)Ni-Cl]). The coupling proceeds through a radical process, involving two nickel centers for the oxidative addition of alkyl halide. The catalysis is second-order in Grignard reagent, first-order in catalyst, and zero-order in alkyl halide. A transient species, [(N2N)Ni-alkyl(2)](alkyl(2)-MgCl), is identified as the key intermediate responsible for the activation of alkyl halide, the formation of which is the turnover-determining step of the catalysis. PMID:23865460

  15. Pd-catalyzed benzylic C-H amidation with benzyl alcohols in water: a strategy to construct quinazolinones.

    PubMed

    Hikawa, Hidemasa; Ino, Yukari; Suzuki, Hideharu; Yokoyama, Yuusaku

    2012-08-17

    A novel method for the synthesis of 4-phenylquinazolinones via a palladium-catalyzed domino reaction of o-aminobenzamides with benzyl alcohols is developed. This protocol involves N-benzylation, benzylic C-H amidation, and dehydrogenation in water, which may play an important role in the smooth generation of the (η(3)-benzyl)palladium species by activation of the hydroxyl group of the benzyl alcohol. PMID:22852777

  16. Palladium-Catalyzed Site-Selective C-H Functionalization of Weakly Coordinating Sulfonamides: Synthesis of Biaryl Sulfonamides.

    PubMed

    Vanjari, Rajeshwer; Guntreddi, Tirumaleswararao; Singh, Krishna Nand

    2016-03-01

    A novel and site selective C-H functionalization of unsubstituted sulfonamides has been developed for the synthesis of ortho aryl sulfonamides. The reaction involves highly regioselective ortho mono arylation of weakly coordinating SO2 NH2 directing group by means of aryl iodides. Palladium acetate in the presence of silver(I) oxide is found to be the most effective catalytic system. PMID:26763530

  17. Pathways and kinetics of methane and ethane C-H bond cleavage on PdO(101).

    PubMed

    Antony, Abbin; Asthagiri, Aravind; Weaver, Jason F

    2013-09-14

    We used conventional density functional theory (DFT) and dispersion-corrected DFT (DFT-D3) calculations to investigate C-H bond activation pathways for methane and ethane σ-complexes adsorbed on the PdO(101) surface. The DFT-D3 calculations predict lower and more physically realistic values of the apparent C-H bond cleavage barriers, which are defined relative to the gas-phase energy level, while giving nearly the same energy differences between stationary states as predicted by conventional DFT for a given reaction pathway. For the stable CH4 η(2) complex on PdO(101), DFT-D3 predicts that the C-H bond cleavage barriers are 55.2 and 16.1 kJ∕mol relative to the initial molecularly adsorbed and gaseous states, respectively. We also predict that dehydrogenation of the resulting CH3 groups and conversion to CH3O species are significantly more energetically demanding than the initial C-H bond activation of CH4 on PdO(101). Using DFT-D3, we find that an η(2) and an η(1) ethane complex can undergo C-H bond cleavage on PdO(101) with intrinsic energy barriers that are similar to that of the methane complex, but with apparent barriers that are close to zero. We also investigated the dissociation kinetics of methane and ethane on PdO(101) using microkinetic models, with parameters derived from the DFT-D3 relaxed structures. We find that a so-called 3N - 2 model, in which two frustrated adsorbate motions are treated as free motions, predicts desorption pre-factors and alkane dissociation probabilities that agree well with estimates obtained from the literature. The microkinetic simulations demonstrate the importance of accurately describing entropic contributions in kinetic simulations of alkane dissociative chemisorption.

  18. Pathways and kinetics of methane and ethane C-H bond cleavage on PdO(101)

    NASA Astrophysics Data System (ADS)

    Antony, Abbin; Asthagiri, Aravind; Weaver, Jason F.

    2013-09-01

    We used conventional density functional theory (DFT) and dispersion-corrected DFT (DFT-D3) calculations to investigate C-H bond activation pathways for methane and ethane σ-complexes adsorbed on the PdO(101) surface. The DFT-D3 calculations predict lower and more physically realistic values of the apparent C-H bond cleavage barriers, which are defined relative to the gas-phase energy level, while giving nearly the same energy differences between stationary states as predicted by conventional DFT for a given reaction pathway. For the stable CH4 η2 complex on PdO(101), DFT-D3 predicts that the C-H bond cleavage barriers are 55.2 and 16.1 kJ/mol relative to the initial molecularly adsorbed and gaseous states, respectively. We also predict that dehydrogenation of the resulting CH3 groups and conversion to CH3O species are significantly more energetically demanding than the initial C-H bond activation of CH4 on PdO(101). Using DFT-D3, we find that an η2 and an η1 ethane complex can undergo C-H bond cleavage on PdO(101) with intrinsic energy barriers that are similar to that of the methane complex, but with apparent barriers that are close to zero. We also investigated the dissociation kinetics of methane and ethane on PdO(101) using microkinetic models, with parameters derived from the DFT-D3 relaxed structures. We find that a so-called 3N - 2 model, in which two frustrated adsorbate motions are treated as free motions, predicts desorption pre-factors and alkane dissociation probabilities that agree well with estimates obtained from the literature. The microkinetic simulations demonstrate the importance of accurately describing entropic contributions in kinetic simulations of alkane dissociative chemisorption.

  19. Pathways and kinetics of methane and ethane C-H bond cleavage on PdO(101).

    PubMed

    Antony, Abbin; Asthagiri, Aravind; Weaver, Jason F

    2013-09-14

    We used conventional density functional theory (DFT) and dispersion-corrected DFT (DFT-D3) calculations to investigate C-H bond activation pathways for methane and ethane σ-complexes adsorbed on the PdO(101) surface. The DFT-D3 calculations predict lower and more physically realistic values of the apparent C-H bond cleavage barriers, which are defined relative to the gas-phase energy level, while giving nearly the same energy differences between stationary states as predicted by conventional DFT for a given reaction pathway. For the stable CH4 η(2) complex on PdO(101), DFT-D3 predicts that the C-H bond cleavage barriers are 55.2 and 16.1 kJ∕mol relative to the initial molecularly adsorbed and gaseous states, respectively. We also predict that dehydrogenation of the resulting CH3 groups and conversion to CH3O species are significantly more energetically demanding than the initial C-H bond activation of CH4 on PdO(101). Using DFT-D3, we find that an η(2) and an η(1) ethane complex can undergo C-H bond cleavage on PdO(101) with intrinsic energy barriers that are similar to that of the methane complex, but with apparent barriers that are close to zero. We also investigated the dissociation kinetics of methane and ethane on PdO(101) using microkinetic models, with parameters derived from the DFT-D3 relaxed structures. We find that a so-called 3N - 2 model, in which two frustrated adsorbate motions are treated as free motions, predicts desorption pre-factors and alkane dissociation probabilities that agree well with estimates obtained from the literature. The microkinetic simulations demonstrate the importance of accurately describing entropic contributions in kinetic simulations of alkane dissociative chemisorption. PMID:24050357

  20. Synthesis of 2-oxindoles via 'transition-metal-free' intramolecular dehydrogenative coupling (IDC) of sp(2) C-H and sp(3) C-H bonds.

    PubMed

    Kumar, Nivesh; Ghosh, Santanu; Bhunia, Subhajit; Bisai, Alakesh

    2016-01-01

    The synthesis of a variety of 2-oxindoles bearing an all-carbon quaternary center at the pseudo benzylic position has been achieved via a 'transition-metal-free' intramolecular dehydrogenative coupling (IDC). The construction of 2-oxindole moieties was carried out through formation of carbon-carbon bonds using KOt-Bu-catalyzed one pot C-alkylation of β-N-arylamido esters with alkyl halides followed by a dehydrogenative coupling. Experimental evidences indicated toward a radical-mediated path for this reaction. PMID:27559367

  1. Intramolecular cyclopropanation and C-H insertion reactions with metal carbenoids generated from cyclopropenes.

    PubMed

    Archambeau, Alexis; Miege, Frédéric; Meyer, Christophe; Cossy, Janine

    2015-04-21

    incorporating an eight-membered ring. The reactivity of rhodium(II) carbenoids generated from 3,3-dimethylcyclopropenylcarbinols was also investigated in intramolecular C(sp(3))-H insertions. Despite their low electrophilic character, these purely donor rhodium(II) carbenoids underwent remarkably efficient diastereoselective 1,5- or 1,6-C-H insertions allowing access to a wide variety of substituted cyclopentanols, cyclohexanols, bicycloalkanols, and tetrahydropyrans with high level of diastereoselectivity and with complete tolerance of a free hydroxyl group. The products arising from the gold(I)- or rhodium(II)-catalyzed ring-opening/intramolecular cyclopropanation or C-H insertion of 3,3-dimethylcyclopropenylcarbinols or 3,3-dimethylcyclopropenylcarbinyl amines always incorporate an isopropylidene moiety, which can potentially undergo subsequent oxidative cleavage into a carbonyl group without epimerization. By virtue of this operation, the 3,3-dimethylcyclopropenyl group formally behaves as a valuable surrogate for an α-diazoketone, with obvious advantages considering the ease of access to the corresponding substrates and that no hazardous reagents are involved in their preparation. These studies have set a useful basis for the development of other reaction pathways involving metal carbenoids generated from these readily available families of substituted cyclopropenes, including the investigation of the yet underexploited synthetic potential of purely donor rhodium(II) carbenoids. PMID:25763601

  2. Leukemia after therapy with alkylating agents for childhood cancer

    SciTech Connect

    Tucker, M.A.; Meadows, A.T.; Boice, J.D. Jr.; Stovall, M.; Oberlin, O.; Stone, B.J.; Birch, J.; Voute, P.A.; Hoover, R.N.; Fraumeni, J.F. Jr.

    1987-03-01

    The risk of leukemia was evaluated in 9,170 2-or-more-year survivors of childhood cancer in the 13 institutions of the Late Effects Study Group. Secondary leukemia occurred in 22 nonreferred individuals compared to 1.52 expected, based on general population rates (relative risk (RR) = 14; 95% confidence interval (CI), 9-22). The influence of therapy for the first cancer on subsequent leukemia risk was determined by a case-control study conducted on 25 cases and 90 matched controls. Treatment with alkylating agents was associated with a significantly elevated risk of leukemia (RR = 4.8; 95% CI, 1.2-18.9). A strong dose-response relationship was also observed between leukemia risk and total dose of alkylating agents, estimated by an alkylator score. The RR of leukemia reached 23 in the highest dose category. Radiation therapy, however, did not increase risk. Although doxorubicin was also identified as a possible risk factor, the excess risk of leukemia following treatment for childhood cancer appears almost entirely due to alkylating agents.

  3. Students' understanding of alkyl halide reactions in undergraduate organic chemistry

    NASA Astrophysics Data System (ADS)

    Cruz-Ramirez de Arellano, Daniel

    Organic chemistry is an essential subject for many undergraduate students completing degrees in science, engineering, and pre-professional programs. However, students often struggle with the concepts and skills required to successfully solve organic chemistry exercises. Since alkyl halides are traditionally the first functional group that is studied in undergraduate organic chemistry courses, establishing a robust understanding of the concepts and reactions related to them can be beneficial in assuring students' success in organic chemistry courses. Therefore, the purpose of this study was to elucidate and describe students' understanding of alkyl halide reactions in an undergraduate organic chemistry course. Participants were interviewed using a think-aloud protocol in which they were given a set of exercises dealing with reactions and mechanisms of alkyl halide molecules in order to shed light on the students' understanding of these reactions and elucidate any gaps in understanding and incorrect warrants that may be present. These interviews were transcribed and analyzed using qualitative inquiry approaches. In general, the findings from this study show that the students exhibited gaps in understanding and incorrect warrants dealing with: (1) classifying substances as bases and/or nucleophiles, (2) assessing the basic or nucleophilic strength of substances, (3) accurately describing the electron movement of the steps that take place during alkyl halide reaction mechanisms, and (4) assessing the viability of their proposed reactive intermediates and breakage of covalent bonds. In addition, implications for teaching and future research are proposed.

  4. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Boric acid, alkyl and substituted alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted...

  5. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Boric acid, alkyl and substituted alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted...

  6. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Boric acid, alkyl and substituted alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted...

  7. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Boric acid, alkyl and substituted alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted...

  8. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Boric acid, alkyl and substituted alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted...

  9. Photocatalytic benzylic C-H bond oxidation with a flavin scandium complex.

    PubMed

    Mühldorf, Bernd; Wolf, Robert

    2015-05-18

    The enhanced reduction potential of riboflavin tetraacetate coordinating to scandium triflate enables the challenging photocatalytic C-H oxidation of electron-deficient alkylbenzenes and benzyl alcohols.

  10. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  11. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  12. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  13. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  14. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  15. Conformation-specific spectroscopy of alkyl benzyl radicals: Effects of a radical center on the CH stretch infrared spectrum of an alkyl chain

    NASA Astrophysics Data System (ADS)

    Korn, Joseph A.; Tabor, Daniel P.; Sibert, Edwin L.; Zwier, Timothy S.

    2016-09-01

    An important initial step in the combustion of gasoline and diesel fuels is the abstraction of hydrogen from alkylbenzenes to form resonance-stabilized alkyl benzyl radicals. This work uses, for the first time, double resonance spectroscopy methods to explore the conformation-specific vibronic and infrared spectroscopy of the α-ethylbenzyl (αEtBz) and α-propylbenzyl (αPrBz) radicals. Local mode Hamiltonian modeling enables assignment of the alkyl CH stretch IR spectra, accounting for Fermi resonance that complicates aliphatic alkyl CH stretch IR spectroscopy. The ground state conformational preferences of the ethyl and propyl chains are changed from those in the alkylbenzenes themselves, with global minima occurring for an in-plane orientation of the alkyl chain (trans) about its first dihedral angle (ϕf123, numbers are alkyl C atoms. C1 is CH radical site). This in-plane structure is the only observed conformer for the α-EtBz radical, while two conformers, tt and tg' share this orientation at the first dihedral, but differ in the second (ϕ1234) for the αPrBz radical. The in-plane orientation lowers the local site frequencies of the CH2 group stretches immediately adjacent to the benzylic radical site by about 50 cm-1 relative to those in pure alkyl chains or alkylbenzenes. This effect of the radical site is localized on the first CH2 group, with little effect on subsequent members of the alkyl chain. In the D1 excited electronic state, an out-of-plane orientation is preferred for the alkyl chains, leading to torsional mode Franck-Condon activity in the D0-D1 spectra that is both conformer-specific and diagnostic of the conformational change.

  16. 4-Alkyl radical extrusion in the cytochrome P-450-catalyzed oxidation of 4-alkyl-1,4-dihydropyridines

    SciTech Connect

    Lee, J.S.; Jacobsen, N.E.; Ortiz de Montellano, P.R. )

    1988-10-04

    Rat liver microsomal cytochrome P-450 oxidizes the 4-methyl, 4-ethyl (DDEP), and 4-isopropyl derivatives of 3,5-bis(carbethoxy)-2,6-dimethyl-1,4,-dihydropyridine to mixtures of the corresponding 4-alkyl and 4-dealkyl pyridines. A fraction of the total microsomal enzyme is destroyed in the process. The 4-dealkyl to 4-alkyl pyridine metabolite ratio, the extent of cytochrome P-450 destruction, and the rate of spin-trapped radical accumulation are correlated in a linear inverse manner with the homolytic or heterolytic bond energies of the 4-alkyl groups of the 4-alkyl-1,4-dihydropyridines. No isotope effects are observed on the pyridine matabolite ratio, the destruction of cytochrome P-450, or the formation of ethyl radicals when (4-{sup 2}H)DDEP is used instead of DDEP. N-Methyl- and N-ethyl-DDEP undergo N-dealkylation rather than aromatization but N-phenyl-DDEP is oxidized to a mixture of the 4-ethyl and 4-deethyl N-phenylpyridinium metabolites. In contrast to the absence of an isotope effect in the oxidation of DDEP, the 4-deethyl to 4-ethyl N-phenylpyridinium metabolite ratio increases 6-fold when N-phenyl(4-{sup 2}H)DDEP is used. The results support the hypothesis that cytochrome P-450 catalyzes the oxidation of dihydropyridines to radical cations and show that the radical cations decay to nonradical products by multiple, substituent-dependent, mechanisms.

  17. Silylation of C-H bonds in aromatic heterocycles by an Earth-abundant metal catalyst

    NASA Astrophysics Data System (ADS)

    Toutov, Anton A.; Liu, Wen-Bo; Betz, Kerry N.; Fedorov, Alexey; Stoltz, Brian M.; Grubbs, Robert H.

    2015-02-01

    Heteroaromatic compounds containing carbon-silicon (C-Si) bonds are of great interest in the fields of organic electronics and photonics, drug discovery, nuclear medicine and complex molecule synthesis, because these compounds have very useful physicochemical properties. Many of the methods now used to construct heteroaromatic C-Si bonds involve stoichiometric reactions between heteroaryl organometallic species and silicon electrophiles or direct, transition-metal-catalysed intermolecular carbon-hydrogen (C-H) silylation using rhodium or iridium complexes in the presence of excess hydrogen acceptors. Both approaches are useful, but their limitations include functional group incompatibility, narrow scope of application, high cost and low availability of the catalysts, and unproven scalability. For this reason, a new and general catalytic approach to heteroaromatic C-Si bond construction that avoids such limitations is highly desirable. Here we report an example of cross-dehydrogenative heteroaromatic C-H functionalization catalysed by an Earth-abundant alkali metal species. We found that readily available and inexpensive potassium tert-butoxide catalyses the direct silylation of aromatic heterocycles with hydrosilanes, furnishing heteroarylsilanes in a single step. The silylation proceeds under mild conditions, in the absence of hydrogen acceptors, ligands or additives, and is scalable to greater than 100 grams under optionally solvent-free conditions. Substrate classes that are difficult to activate with precious metal catalysts are silylated in good yield and with excellent regioselectivity. The derived heteroarylsilane products readily engage in versatile transformations enabling new synthetic strategies for heteroaromatic elaboration, and are useful in their own right in pharmaceutical and materials science applications.

  18. The Stereoselective Formation of Bicyclic Enamines with Bridgehead Unsaturation via Tandem C-H Bond Activation/Alkenylation/Electrocyclization

    SciTech Connect

    Ellman, Jonathan A.; Yotphan, Sirilata; Bergman, Robert

    2007-12-10

    Rhodium-catalyzed intermolecular C-H activation of {alpha}, {beta}-unsaturated imines in the presence of alkynes leads to a tandem process in which coupling to the alkyne occurs at the {beta}-C-H bond of the imine, followed by electrocyclization of the resulting azatriene intermediates to give dihydropyridines (eq 1). Consideration of the intramolecular version of this overall transformation (Scheme 1) raises interesting regiochemical issues. For example in a compound such as 1, where the nitrogen and alkyne are connected by a 4-carbon tether, the presumed first-formed hydrido(vinyl)rhodium function can add to the triple bond in a 1,2-fashion, producing complex 2 with a new endocyclic double bond. Alternatively, addition might occur in a 2,1-fashion, leading to product 4 with an exocyclic double bond. We now wish to report that this intramolecular cyclization occurs smoothly at 100 C, and the exocyclic double bond route is exclusively followed. Remarkably, products such as 4 do not resist further cyclization. Even though both the transition state for this process and the resulting product are presumably strained, the overall transformation leads to good yields of unusual bridgehead doubly-bonded enamines such as 5. The unique chemistry of conjugated enamine 5 is consistent with the increased strain of this molecule as well as with inhibited conjugation between the nitrogen lone pair and the adjacent double bond (vida infra). We began our investigation into the C-H activation/cyclization of alkyne-tethered imine 1 by extensive screening of transition metal catalysts for this process. Rhodium-based catalysts were found to be the most efficient (Table 1), leading exclusively to the bridgehead dienamine; none of the catalysts that were employed in the screening led to quinolizidine 3 or to the product of intramolecular Diels-Alder reaction. The optimized reaction conditions employ the electron-rich monophosphine ligand (p-NMe{sub 2})PhPEt{sub 2} in 1:1 ratio relative

  19. Mechanistic insights into nickamine-catalyzed alkyl-alkyl cross-coupling reactions.

    PubMed

    Breitenfeld, Jan; Hu, Xile

    2014-01-01

    Within the last decades the transition metal-catalyzed cross-coupling of non-activated alkyl halides has significantly progressed. Within the context of alkyl-alkyl cross-coupling, first row transition metals spanning from iron, over cobalt, nickel, to copper have been successfully applied to catalyze this difficult reaction. The mechanistic understanding of these reactions is still in its infancy. Herein we outline our latest mechanistic studies that explain the efficiency of nickel, in particular nickamine-catalyzed alkyl-alkyl cross-coupling reactions.

  20. Gold-catalyzed construction of two adjacent quaternary stereocenters via sequential C-H functionalization and aldol annulation.

    PubMed

    Yu, Zhunzhun; Qiu, Haile; Liu, Lu; Zhang, Junliang

    2016-02-01

    Herein, a novel and efficient gold-catalyzed intermolecular C(sp(2))-H functionalization (Friedel-Crafts alkylation) and aldol annulation strategy is presented. This cascade process allows the synthesis of a series of indanol and tetrahydronaphthalenol derivatives with two adjacent quaternary stereocenters. The attractive reaction features are the use of readily available starting materials, good diastereoselectivity, good functional-group tolerance and mild reaction conditions. Furthermore, preliminary results indicate that this transformation is amenable to enantioselectivitive synthesis with further chiral ligand screening and design. PMID:26725981

  1. Occupational asthma due to alkyl cyanoacrylate

    SciTech Connect

    Nakazawa, T. )

    1990-08-01

    A case of bronchial asthma induced by occupational exposure to alkyl cyanoacrylate, an adhesive, occurred in an assembly operation. Provocative exposure testing induced immediate and delayed asthmatic responses. Alkyl cyanoacrylate seemed to act as an allergen or as an irritant, resulting in the development of asthma.

  2. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkylated urea. 721.9892 Section 721.9892 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.9892 Alkylated urea. (a) Chemical...

  3. Rh(III)-Catalyzed C-H Amidation of Indoles with Isocyanates.

    PubMed

    Jeong, Taejoo; Han, Sangil; Mishra, Neeraj Kumar; Sharma, Satyasheel; Lee, Seok-Yong; Oh, Joa Sub; Kwak, Jong Hwan; Jung, Young Hoon; Kim, In Su

    2015-07-17

    The rhodium(III)-catalyzed direct amidation of indoles and pyrroles with aryl and alkyl isocyanates is described. These transformations provide a facile and efficient construction of C2-amidated N-heterocyclic scaffolds.

  4. Salt-free catanionic surface active ionic liquids 1-alkyl-3-methylimidazolium alkylsulfate: aggregation behavior in aqueous solution.

    PubMed

    Jiao, Jingjing; Han, Bing; Lin, Meijia; Cheng, Ni; Yu, Li; Liu, Min

    2013-12-15

    A series of salt-free catanionic surface active ionic liquids (SAILs), 1-alkyl-3-methylimidazolim alkyl sulfates (denoted as [Cnmim][CmSO4], n=6, 8, 10; m=12 and n=4; m=10, 14) were synthesized by an ion exchange reaction and their surface properties in aqueous solution were examined systematically by surface tension, fluorescence and electrical conductivity measurements. As catanionic surfactants, these SAILs exhibit notably higher surface activity, compared to the cationic or anionic analogues. Increment in both cationic and anionic alkyl chain lengths for [Cnmim][CmSO4] can both improve the amphiphilic character remarkably. This can be ascribed to cooperative interactions as formation of catanionic pairs between alkyl-substituted imidazolium cations and alkyl sulfate anions. The negative micellization Gibbs free energy values prove that the micellization of all the 1-alkyl-3-methylimidazolim alkyl sulfates investigated is a spontaneous process. Any additional CH2 group makes the micellization process easier regardless if it is on a cation or an anion. When keeping the total carbon atom number constant, we find that the [Cnmim][CmSO4] molecules with greater asymmetric alkyl chains display superior surface activity. This work indicates that the self-assembly of these imidazolium-based salt-free catanionic SAILs can be tailored by adjusting the mismatch of alkyl chains. These SAILs are expected to have potential applications in the fields of colloidal and interface and nanomaterial synthesis.

  5. Integrated catalysis opens new arylation pathways via regiodivergent enzymatic C-H activation.

    PubMed

    Latham, Jonathan; Henry, Jean-Marc; Sharif, Humera H; Menon, Binuraj R K; Shepherd, Sarah A; Greaney, Michael F; Micklefield, Jason

    2016-01-01

    Despite major recent advances in C-H activation, discrimination between two similar, unactivated C-H positions is beyond the scope of current chemocatalytic methods. Here we demonstrate that integration of regioselective halogenase enzymes with Pd-catalysed cross-coupling chemistry, in one-pot reactions, successfully addresses this problem for the indole heterocycle. The resultant 'chemobio-transformation' delivers a range of functionally diverse arylated products that are impossible to access using separate enzymatic or chemocatalytic C-H activation, under mild, aqueous conditions. This use of different biocatalysts to select different C-H positions contrasts with the prevailing substrate-control approach to the area, and presents opportunities for new pathways in C-H activation chemistry. The issues of enzyme and transition metal compatibility are overcome through membrane compartmentalization, with the optimized process requiring no intermediate work-up or purification steps. PMID:27283121

  6. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  7. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.

    1989-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  8. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-09-07

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 figures.

  9. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70.degree. C. and 500.degree. C. and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  10. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1994-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  11. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.

    1989-07-18

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  12. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1994-06-14

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  13. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-01-05

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70 C and 500 C and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  14. Bioinspired Nonheme Iron Catalysts for C-H and C═C Bond Oxidation: Insights into the Nature of the Metal-Based Oxidants.

    PubMed

    Oloo, Williamson N; Que, Lawrence

    2015-09-15

    Recent efforts to design synthetic iron catalysts for the selective and efficient oxidation of C-H and C═C bonds have been inspired by a versatile family of nonheme iron oxygenases. These bioinspired nonheme (N4)Fe(II) catalysts use H2O2 to oxidize substrates with high regio- and stereoselectivity, unlike in Fenton chemistry where highly reactive but unselective hydroxyl radicals are produced. In this Account, we highlight our efforts to shed light on the nature of metastable peroxo intermediates, which we have trapped at -40 °C, in the reactions of the iron catalyst with H2O2 under various conditions and the high-valent species derived therefrom. Under the reaction conditions that originally led to the discovery of this family of catalysts, we have characterized spectroscopically an Fe(III)-OOH intermediate (EPR g(max) = 2.19) that leads to the hydroxylation of substrate C-H bonds or the epoxidation and cis-dihydroxylation of C═C bonds. Surprisingly, these organic products show incorporation of (18)O from H2(18)O, thereby excluding the possibility of a direct attack of the Fe(III)-OOH intermediate on the substrate. Instead, a water-assisted mechanism is implicated in which water binding to the iron(III) center at a site adjacent to the hydroperoxo ligand promotes heterolytic cleavage of the O-O bond to generate an Fe(V)(O)(OH) oxidant. This mechanism is supported by recent kinetic studies showing that the Fe(III)-OOH intermediate undergoes exponential decay at a rate enhanced by the addition of water and retarded by replacement of H2O with D2O, as well as mass spectral evidence for the Fe(V)(O)(OH) species obtained by the Costas group. The nature of the peroxo intermediate changes significantly when the reactions are carried out in the presence of carboxylic acids. Under these conditions, spectroscopic studies support the formation of a (κ(2)-acylperoxo)iron(III) species (EPR g(max) = 2.58) that decays at -40 °C in the absence of substrate to form an

  15. Highly Active Gold(I)-Silver(I) Oxo Cluster Activating sp³ C-H Bonds of Methyl Ketones under Mild Conditions.

    PubMed

    Pei, Xiao-Li; Yang, Yang; Lei, Zhen; Chang, Shan-Shan; Guan, Zong-Jie; Wan, Xian-Kai; Wen, Ting-Bin; Wang, Quan-Ming

    2015-04-29

    The activation of C(sp(3))-H bonds is challenging, due to their high bond dissociation energy, low proton acidity, and highly nonpolar character. Herein we report a unique gold(I)-silver(I) oxo cluster protected by hemilabile phosphine ligands [OAu3Ag3(PPhpy2)3](BF4)4 (1), which can activate C(sp(3))-H bonds under mild conditions for a broad scope of methyl ketones (RCOCH3, R = methyl, phenyl, 2-methylphenyl, 2-aminophenyl, 2-hydroxylphenyl, 2-pyridyl, 2-thiazolyl, tert-butyl, ethyl, isopropyl). Activation happens via triple deprotonation of the methyl group, leading to formation of heterometallic Au(I)-Ag(I) clusters with formula RCOCAu4Ag4(PPhpy2)4(BF4)5 (PPhpy2 = bis(2-pyridyl)phenylphosphine). Cluster 1 can be generated in situ via the reaction of [OAu3Ag(PPhpy2)3](BF4)2 with 2 equiv of AgBF4. The oxo ion and the metal centers are found to be essential in the cleavage of sp(3) C-H bonds of methyl ketones. Interestingly, cluster 1 selectively activates the C-H bonds in -CH3 rather than the N-H bonds in -NH2 or the O-H bond in -OH which is traditionally thought to be more reactive than C-H bonds. Control experiments with butanone, 3-methylbutanone, and cyclopentanone as substrates show that the auration of the C-H bond of the terminal methyl group is preferred over secondary or tertiary sp(3) C-H bonds; in other words, the C-H bond activation is influenced by steric effect. This work highlights the powerful reactivity of metal clusters toward C-H activation and sheds new light on gold(I)-mediated catalysis.

  16. Binary functionalization of H:Si(111) surfaces by alkyl monolayers with different linker atoms enhances monolayer stability and packing.

    PubMed

    Arefi, Hadi H; Nolan, Michael; Fagas, Giorgos

    2016-05-14

    Alkyl monolayer modified Si forms a class of inorganic-organic hybrid materials with applications across many technologies such as thin-films, fuel/solar-cells and biosensors. Previous studies have shown that the linker atom, through which the monolayer binds to the Si substrate, and any tail group in the alkyl chain, can tune the monolayer stability and electronic properties. In this paper we study the H:Si(111) surface functionalized with binary SAMs: these are composed of alkyl chains that are linked to the surface by two different linker groups. Aiming to enhance SAM stability and increase coverage over singly functionalized Si, we examine with density functional theory simulations that incorporate vdW interactions, a range of linker groups which we denote as -X-(alkyl) with X = CH2, O(H), S(H) or NH(2) (alkyl = C6 and C12 chains). We show how the stability of the SAM can be enhanced by adsorbing alkyl chains with two different linkers, e.g. Si-[C, NH]-alkyl, through which the adsorption energy is increased compared to functionalization with the individual -X-alkyl chains. Our results show that it is possible to improve stability and optimum coverage of alkyl functionalized SAMs linked through a direct Si-C bond by incorporating alkyl chains linked to Si through a different linker group, while preserving the interface electronic structure that determines key electronic properties. This is important since any enhancement in stability and coverage to give more densely packed monolayers will result in fewer defects. We also show that the work function can be tuned within the interval of 3.65-4.94 eV (4.55 eV for bare H:Si(111)).

  17. Ni nanoparticle catalyzed growth of MWCNTs on Cu NPs @ a-C:H substrate

    NASA Astrophysics Data System (ADS)

    Ghodselahi, T.; Solaymani, S.; Akbarzadeh Pasha, M.; Vesaghi, M. A.

    2012-11-01

    NiCu NPs @ a-C:H thin films with different Cu content were prepared by co-deposition by RF-sputtering and RF-plasma enhanced chemical vapor deposition (RF-PECVD) from acetylene gas and Cu and Ni targets. The prepared samples were used as catalysts for growing multi-wall carbon nanotubes (MWCNTs) from liquid petroleum gas (LPG) at 825 °C by thermal chemical vapor deposition (TCVD). By addition of Cu NPs @ a-C:H thin layer as substrate for Ni NPs catalyst, the density of the grown CNTs is greatly enhanced in comparison to bare Si substrate. Furthermore the average diameter of the grown CNTs decreases by decreasing of Cu content of Cu NPs @ a-C:H thin layer. However Cu NPs @ a-C:H by itself has no catalytic property in MWCNTs growth. Morphology and electrical and optical properties of Cu NPs @ a-C:H thin layer is affected by Cu content and each of them is effective parameter on growth of MWCNTs based on Ni NPs catalyst. Moreover, adding of a low amount of Ni NPs doesn't vary optical, electrical and morphology properties of Cu NPs @ a-C:H thin layer but it has a profound effect on its catalytic activity. Finally the density and diameter of MWCNTs can be optimized by selection of the Cu NPs @ a-C:H thin layer as substrate of Ni NPs.

  18. X-Ray absorption spectroscopy investigation of 1-alkyl-3-methylimidazolium bromide salts

    SciTech Connect

    D'Angelo, Paola; Zitolo, Andrea; Migliorati, Valentina; Bodo, Enrico; Caminiti, Ruggero; Aquilanti, Giuliana; Hazemann, Jean Louis; Testemale, Denis; Mancini, Giordano

    2011-08-21

    X-ray absorption spectroscopy (XAS) has been used to unveil the bromide ion local coordination structure in 1-alkyl-3-methylimidazolium bromide [C{sub n}mim]Br ionic liquids (ILs) with different alkyl chains. The XAS spectrum of 1-ethyl-3-methylimidazolium bromide has been found to be different from those of the other members of the series, from the butyl to the decyl derivatives, that have all identical XAS spectra. This result indicates that starting from 1-buthyl-3-methylimidazolium bromide the local molecular arrangement around the bromide anion is the same independently from the length of the alkyl chain, and that the imidazolium head groups in the liquid ILs with long alkyl chains assume locally the same orientation as in the [C{sub 4}mim]Br crystal. With this study we show that the XAS technique is an effective direct tool for unveiling the local structural arrangements around selected atoms in ILs.

  19. Deciphering the genomic targets of alkylating polyamide conjugates using high-throughput sequencing

    PubMed Central

    Chandran, Anandhakumar; Syed, Junetha; Taylor, Rhys D.; Kashiwazaki, Gengo; Sato, Shinsuke; Hashiya, Kaori; Bando, Toshikazu; Sugiyama, Hiroshi

    2016-01-01

    Chemically engineered small molecules targeting specific genomic sequences play an important role in drug development research. Pyrrole-imidazole polyamides (PIPs) are a group of molecules that can bind to the DNA minor-groove and can be engineered to target specific sequences. Their biological effects rely primarily on their selective DNA binding. However, the binding mechanism of PIPs at the chromatinized genome level is poorly understood. Herein, we report a method using high-throughput sequencing to identify the DNA-alkylating sites of PIP-indole-seco-CBI conjugates. High-throughput sequencing analysis of conjugate 2 showed highly similar DNA-alkylating sites on synthetic oligos (histone-free DNA) and on human genomes (chromatinized DNA context). To our knowledge, this is the first report identifying alkylation sites across genomic DNA by alkylating PIP conjugates using high-throughput sequencing. PMID:27098039

  20. From Weakness to Strength: C-H/π-Interaction-Guided Self-Assembly and Gelation of Poly(benzyl ether) Dendrimers.

    PubMed

    Peng, Yi; Feng, Yu; Deng, Guo-Jun; He, Yan-Mei; Fan, Qing-Hua

    2016-09-13

    The C-H/π interactions as the key driving force for the construction of supramolecular gels remain a great challenge because of their weak nature. We hereby employed for the first time weak C-H/π interactions for the construction of supramolecular dendritic gels based on peripherally methyl-functionalized poly(benzyl ether) dendrimers. Their gelation property is highly dependent on the nature of the peripheral methyl groups. Furthermore, single-crystal X-ray analysis and NMR spectroscopy revealed that multiple C-H/π interactions between the proton of the methyl group and the electron-rich peripheral methyl-substituted aryl ring played significant roles in the formation of supramolecular nanofibers and organogels. This study uncovers the critical role of weak noncovalent interactions and provides new insights into the further design of self-assembled nanomaterials.

  1. The dimers of glyoxal and acrolein with H 2O and HF: Negative intramolecular coupling and blue-shifted C-H stretch

    NASA Astrophysics Data System (ADS)

    Karpfen, Alfred; Kryachko, Eugene S.

    2010-04-01

    The structures and the vibrational spectra of the hydrogen-bonded complexes: glyoxal-H 2O, glyoxal-HF, acrolein-H 2O, and acrolein-HF, are investigated within the MP2/aug-cc-pVTZ computational approach. It is demonstrated that the calculated blue shifts of the C-H stretching frequencies in the glyoxal-H 2O complexes are only indirectly pertinent to hydrogen bonding to the C-H group. The comparison with the glyoxal-HF and the acrolein-HF complexes reveals that these blue shifts are a direct consequence of a negative intramolecular coupling between vicinal C dbnd O and C-H bonds in the aldehyde groups of isolated glyoxal and acrolein molecules. To support this interpretation, the halogen-bonded complexes glyoxal-BrF and acrolein-BrF are discussed.

  2. From Weakness to Strength: C-H/π-Interaction-Guided Self-Assembly and Gelation of Poly(benzyl ether) Dendrimers.

    PubMed

    Peng, Yi; Feng, Yu; Deng, Guo-Jun; He, Yan-Mei; Fan, Qing-Hua

    2016-09-13

    The C-H/π interactions as the key driving force for the construction of supramolecular gels remain a great challenge because of their weak nature. We hereby employed for the first time weak C-H/π interactions for the construction of supramolecular dendritic gels based on peripherally methyl-functionalized poly(benzyl ether) dendrimers. Their gelation property is highly dependent on the nature of the peripheral methyl groups. Furthermore, single-crystal X-ray analysis and NMR spectroscopy revealed that multiple C-H/π interactions between the proton of the methyl group and the electron-rich peripheral methyl-substituted aryl ring played significant roles in the formation of supramolecular nanofibers and organogels. This study uncovers the critical role of weak noncovalent interactions and provides new insights into the further design of self-assembled nanomaterials. PMID:27538342

  3. Safety Assessment of Alkyl Esters as Used in Cosmetics.

    PubMed

    Fiume, Monice M; Heldreth, Bart A; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-09-01

    The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of 237 alkyl esters for use in cosmetics. The alkyl esters included in this assessment have a variety of reported functions in cosmetics, with skin-conditioning agent being the most common function. The Panel reviewed available animal and clinical data in making its determination of safety on these ingredients, and where there were data gaps, similarity in structure, properties, functions, and uses of these ingredients allowed for extrapolation of the available toxicological data to assess the safety of the entire group. The Panel concluded that these ingredients are safe in cosmetic formulations in the present practices of use and concentration when formulated to be nonirritating.

  4. Activity of quinone alkylating agents in quinone-resistant cells.

    PubMed

    Begleiter, A; Leith, M K

    1990-05-15

    The role of the quinone group in the antitumor activity of quinone alkylating agents, such as mitomycin C and 2,5-diaziridinyl-3,5-bis(carboethoxyamino)-1,4-benzoquinone, is still uncertain. The quinone group may contribute to antitumor activity by inducing DNA strand breaks through the formation of free radicals and/or by influencing the alkylating activity of the quinone alkylators. The cytotoxic activity and DNA damage produced by the model quinone alkylating agents, benzoquinone mustard and benzoquinone dimustard, were compared in L5178Y murine lymphoblasts sensitive and resistant to the model quinone antitumor agent, hydrolyzed benzoquinone mustard. The resistant cell lines, L5178Y/HBM2 and L5178Y/HBM10, have increased concentrations of glutathione and elevated catalase, superoxide dismutase, glutathione S-transferase, and DT-diaphorase activity. L5178Y/HBM2 and L5178Y/HBM10 cells were 7.4- and 8.5-fold less sensitive to benzoquinone mustard and 1.7- and 4.3-fold less sensitive to benzoquinone dimustard, respectively, compared with sensitive cells, but showed no resistance to the non-quinone alkylating agent, aniline mustard. The formation of DNA double strand breaks by benzoquinone mustard was reduced by 2- and 8-fold in L5178Y/HBM2 and L5178Y/HBM10 cells, respectively, while double strand break formation by benzoquinone dimustard was reduced only in the L5178Y/HBM10 cells. The number of DNA-DNA cross-links produced by benzoquinone mustard was 3- and 6-fold lower, and the number produced by benzoquinone dimustard was 35% and 2-fold lower in L5178Y/HBM2 and L5178Y/HBM10 cells, respectively, compared with L5178Y parental cells. In contrast, cross-linking by aniline mustard was unchanged in sensitive and resistant cells. Dicoumarol, an inhibitor of DT-diaphorase, increased the cytotoxic activity of both benzoquinone mustard and benzoquinone dimustard in L5178Y/HBM10 cells. This study provides evidence that elevated DT-diaphorase activity in the resistant cells

  5. Wettability of pristine and alkyl-functionalized graphane.

    PubMed

    Vanzo, Davide; Bratko, Dusan; Luzar, Alenka

    2012-07-21

    Graphane is a hydrogenated form of graphene with high bandgap and planar structure insensitive to a broad range of chemical substitutions. We describe an atomistic simulation approach to predict wetting properties of this new material. We determine the contact angle to be 73°. The lower hydrophobicity compared to graphene is explained by the increased planar density of carbon atoms while we demonstrate that the presence of partial charges on carbon and hydrogen atoms plays only a minor role. We further examine the effects of graphane functionalization by alkyl groups of increasing chain lengths. The gradual increase in contact angle with chain length offers a precise control of surface wettability. A saturated contact angle of 114° is reached in butylated form. We find the saturation of contact angle with respect to the length of the functional groups to coincide with the loss of water's ability to penetrate the n-alkyl molecular brush and interact with carbon atoms of the underlying lattice. Since no experimental data have yet become available, our modeling results provide the first estimate of the wettability of graphane. The results also show how its alkyl functionalization provides the basis for a variety of chemical modifications to tune hydrophilicity while preserving the planar geometry of the substrate. PMID:22830724

  6. Wettability of pristine and alkyl-functionalized graphane

    NASA Astrophysics Data System (ADS)

    Vanzo, Davide; Bratko, Dusan; Luzar, Alenka

    2012-07-01

    Graphane is a hydrogenated form of graphene with high bandgap and planar structure insensitive to a broad range of chemical substitutions. We describe an atomistic simulation approach to predict wetting properties of this new material. We determine the contact angle to be 73°. The lower hydrophobicity compared to graphene is explained by the increased planar density of carbon atoms while we demonstrate that the presence of partial charges on carbon and hydrogen atoms plays only a minor role. We further examine the effects of graphane functionalization by alkyl groups of increasing chain lengths. The gradual increase in contact angle with chain length offers a precise control of surface wettability. A saturated contact angle of 114° is reached in butylated form. We find the saturation of contact angle with respect to the length of the functional groups to coincide with the loss of water's ability to penetrate the n-alkyl molecular brush and interact with carbon atoms of the underlying lattice. Since no experimental data have yet become available, our modeling results provide the first estimate of the wettability of graphane. The results also show how its alkyl functionalization provides the basis for a variety of chemical modifications to tune hydrophilicity while preserving the planar geometry of the substrate.

  7. Synthesis and Antioxidant Activity of Hydroxytyrosol Alkyl-Carbonate Derivatives.

    PubMed

    Fernandez-Pastor, Ignacio; Fernandez-Hernandez, Antonia; Rivas, Francisco; Martinez, Antonio; Garcia-Granados, Andres; Parra, Andres

    2016-07-22

    Three procedures have been investigated for the isolation of tyrosol (1) and hydroxytyrosol (2) from a phenolic extract obtained from the solid residue of olive milling. These three methods, which facilitated the recovery of these phenols, were chemical or enzymatic acetylation, benzylation, and carbomethoxylation, and subsequent carbonylation or acetonation reactions. Several new lipophilic alkyl-carbonate derivatives of hydroxytyrosol have been synthesized, coupling the primary hydroxy group of this phenol, through a carbonate linker, using alcohols with different chain lengths. The antioxidant properties of these lipophilic derivatives have been evaluated by different methods and compared with free hydroxytyrosol (2) and also with the well-known antioxidants BHT and α-tocopherol. Three methods were used for the determination of this antioxidant activity: FRAP and ABTS assays, to test the antioxidant power in hydrophilic media, and the Rancimat test, to evaluate the antioxidant capacity in a lipophilic matrix. These new alkyl-carbonate derivatives of hydroxytyrosol enhanced the antioxidant activity of this natural phenol, with their antioxidant properties also being higher than those of the commercial antioxidants BHT and α-tocopherol. There was no clear influence of the side-chain length on the antioxidant properties of the alkyl-carbonate derivatives of 2, although the best results were achieved mainly by the compounds with a longer chain on the primary hydroxy group of this natural phenolic substance. PMID:27337069

  8. Opportunities and challenges for direct C-H functionalization of piperazines.

    PubMed

    Ye, Zhishi; Gettys, Kristen E; Dai, Mingji

    2016-01-01

    Piperazine ranks within the top three most utilized N-heterocyclic moieties in FDA-approved small-molecule pharmaceuticals. Herein we summarize the current synthetic methods available to perform C-H functionalization on piperazines in order to lend structural diversity to this privileged drug scaffold. Multiple approaches such as those involving α-lithiation trapping, transition-metal-catalyzed α-C-H functionalizations, and photoredox catalysis are discussed. We also highlight the difficulties experienced when successful methods for α-C-H functionalization of acyclic amines and saturated mono-nitrogen heterocyclic compounds (such as piperidines and pyrrolidines) were applied to piperazine substrates. PMID:27340462

  9. Synthesis, Thermal Properties and Cytotoxicity Evaluation of Hydrocarbon and Fluorocarbon Alkyl β-D-xylopyranoside Surfactants

    PubMed Central

    Xu, Wenjin; Osei-Prempeh, Gifty; Lema Herrera, Fresia C.; Oldham, E. Davis; Aguilera, Renato J.; Parkin, Sean; Rankin, Stephen E.; Knutson, Barbara L.; Lehmler, Hans-Joachim

    2011-01-01

    Alkyl β-D-xylopyranosides are highly surface active, biodegradable surfactants that can be prepared from hemicelluloses and are of interest for use as pharmaceuticals, detergents, agrochemicals and personal care products. To gain further insights into their structure-property and structure-activity relationships, the present study synthesized a series of hydrocarbon (-C6H13 to -C16H33) and fluorocarbon (-(CH2)2C6F13) alkyl β-D-xylopyranosides in four steps from D-xylose by acylation or benzoylation, bromination, Koenigs-Knorr reaction and hydrolysis, with the benzoyl protecting group giving better yields compared to the acyl group in the Koenigs-Knorr reaction. All alkyl β-D-xylopyranosides formed thermotropic liquid crystals. The phase transition of the solid crystalline phase to a liquid crystalline phase increased linearly with the length of the hydrophobic tail. The clearing points were near constant for alkyl β-D-xylopyranosides with a hydrophobic tail ≥ 8, but occurred at a significantly lower temperature for hexyl β-D-xylopyranoside. Short and long-chain alkyl β-D-xylopyranosides displayed no cytotoxicity at concentration below their aqueous solubility limit. Hydrocarbon and fluorocarbon alkyl β-D-xylopyranosides with intermediate chain length displayed some toxicity at millimolar concentrations due to apoptosis. PMID:22207000

  10. Regioselectivity of Birch reductive alkylation of biaryls.

    PubMed

    Lebeuf, Raphaël; Robert, Frédéric; Landais, Yannick

    2005-10-13

    [reaction: see text] The regioselectivity of the Birch reductive alkylation of polysubstituted biaryls has been investigated. Results indicate that regioselectivity is affected by the electronic nature of substituents on both aromatic rings. The electron-rich 3,5-dimethoxyphenyl moiety is selectively reduced and then alkylated, while phenols and aniline are not dearomatized under these conditions. Biaryls possessing a phenol moiety are alkylated on the second ring, providing that the acidic proton has been removed prior to the Li/NH3 reduction.

  11. One-pot synthesis of 4'-alkyl-4-cyanobiaryls on the basis of the terephthalonitrile dianion and neutral aromatic nitrile cross-coupling.

    PubMed

    Peshkov, Roman Yu; Panteleeva, Elena V; Chunyan, Wang; Tretyakov, Evgeny V; Shteingarts, Vitalij D

    2016-01-01

    A convenient one-pot approach to alkylcyanobiaryls is described. The method is based on biaryl cross-coupling between the sodium salt of the terephthalonitrile dianion and a neutral aromatic nitrile in liquid ammonia, and successive alkylation of the long-lived anionic intermediate with alkyl bromides. The reaction is compatible with benzonitriles that contain methyl, methoxy and phenyl groups, fluorine atoms, and a 1-cyanonaphthalene residue. The variety of ω-substituted alkyl bromides, including an extra bromine atom, a double bond, cyano and ester groups, as well as a 1,3-dioxane fragment are suitable as alkylation reagents. PMID:27559409

  12. One-pot synthesis of 4′-alkyl-4-cyanobiaryls on the basis of the terephthalonitrile dianion and neutral aromatic nitrile cross-coupling

    PubMed Central

    Peshkov, Roman Yu; Chunyan, Wang; Tretyakov, Evgeny V; Shteingarts, Vitalij D

    2016-01-01

    Summary A convenient one-pot approach to alkylcyanobiaryls is described. The method is based on biaryl cross-coupling between the sodium salt of the terephthalonitrile dianion and a neutral aromatic nitrile in liquid ammonia, and successive alkylation of the long-lived anionic intermediate with alkyl bromides. The reaction is compatible with benzonitriles that contain methyl, methoxy and phenyl groups, fluorine atoms, and a 1-cyanonaphthalene residue. The variety of ω-substituted alkyl bromides, including an extra bromine atom, a double bond, cyano and ester groups, as well as a 1,3-dioxane fragment are suitable as alkylation reagents. PMID:27559409

  13. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Alkyl ketene dimers. 176.120 Section 176.120 Food... Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may... section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl...

  14. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Alkyl ketene dimers. 176.120 Section 176.120 Food... Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may be safely used as a component of articles..., transporting, or holding food, subject to the provisions of this section. (a) The alkyl ketene dimers...

  15. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Alkyl ketene dimers. 176.120 Section 176.120 Food... Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may... section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl...

  16. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Alkyl ketene dimers. 176.120 Section 176.120 Food... Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may... section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl...

  17. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Alkyl ketene dimers. 176.120 Section 176.120 Food... Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may... section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl...

  18. Synthesis of Dihydropyridines and Pyridines from Imines and Alkynes via C-H Activation

    SciTech Connect

    Ellman, Jonathan A.; Colby, Denise; Bergman, Robert

    2007-11-20

    A convenient one-pot C-H alkenylation/electrocyclization/aromatization sequence has been developed for the synthesis of highly substituted pyridine derivatives from alkynes and {alpha},{beta}-unsaturated N-benzyl aldimines and ketimines that proceeds through dihydropyridine intermediates. A new class of ligands for C-H activation was developed, providing broader scope for the alkenylation step than could be achieved with previously reported ligands. Substantial information was obtained about the mechanism of the reaction. This included the isolation of a C-H activated complex and its structure determination by X-ray analysis; in addition, kinetic simulations using the Copasi software were employed to determine rate constants for this transformation, implicating facile C-H oxidative addition and slow reductive elimination steps.

  19. Enhanced Reactivity in Dioxirane C-H Oxidations via Strain Release: A Computational and Experimental Study

    PubMed Central

    Zou, Lufeng; Paton, Robert S.; Eschenmoser, Albert; Newhouse, Timothy R.; Baran, Phil S.; Houk, K. N.

    2013-01-01

    The site- and stereo-selectivities of C-H oxidations of substituted cyclohexanes and trans-decalins by dimethyldioxirane (DMDO) were investigated computationally with quantum mechanical density functional theory (DFT). The multi-configuration CASPT2 method was employed on model systems to establish the preferred mechanism and transition state geometry. The reaction pathway involving a rebound step is established to account for the retention of stereochemistry. The oxidation of sclareolide with dioxirane reagents is reported, including the oxidation by the in situ generated tBu-TFDO, a new dioxirane that better discriminates between C-H bonds based on steric effects. The release of 1,3-diaxial strain in the transition state contributes to the site selectivity and enhanced axial reactivity for tertiary C-H bonds, a result of the lowering of distortion energy. In addition to this strain release factor, steric and inductive effects contribute to the rates of C-H oxidation by dioxiranes. PMID:23461537

  20. Synthesis of indoles and tryptophan derivatives via photoinduced nitrene C-H insertion.

    PubMed

    Junk, Lukas; Kazmaier, Uli

    2016-03-14

    Functionalized indoles and tryptophans can be obtained from stannylated alkenes and o-iodoanilines via Stille coupling. Subsequent azidation and photochemical nitrene generation results in the formation of the heterocyclic ring systems via C-H insertion. PMID:26869211

  1. Generation of benzyne from benzoic acid using C-H activation.

    PubMed

    Cant, Alastair A; Roberts, Lee; Greaney, Michael F

    2010-12-01

    ortho C-H activation of benzoic acids with Pd(II) generates an oxapalladacycle that can decarboxylate to produce a palladium-associated aryne. The arynes then undergo [2+2+2] trimerisation to afford triphenylenes.

  2. The palladium-catalyzed intermolecular C-H chalcogenation of arenes.

    PubMed

    Qiu, Renhua; Reddy, Vutukuri Prakash; Iwasaki, Takanori; Kambe, Nobuaki

    2015-01-01

    Palladium catalyzes the intermolecular chalcogenation of carbazole, 2-phenylpyridine, benzo[h]quinolone, and indole derivatives with disulfides and diselenides via selective C-H bond cleavage, providing a convenient route to thio and selenoethers. PMID:25437148

  3. Charge-transfer-directed radical substitution enables para-selective C-H functionalization

    NASA Astrophysics Data System (ADS)

    Boursalian, Gregory B.; Ham, Won Seok; Mazzotti, Anthony R.; Ritter, Tobias

    2016-08-01

    Efficient C-H functionalization requires selectivity for specific C-H bonds. Progress has been made for directed aromatic substitution reactions to achieve ortho and meta selectivity, but a general strategy for para-selective C-H functionalization has remained elusive. Herein we introduce a previously unappreciated concept that enables nearly complete para selectivity. We propose that radicals with high electron affinity elicit arene-to-radical charge transfer in the transition state of radical addition, which is the factor primarily responsible for high positional selectivity. We demonstrate with a simple theoretical tool that the selectivity is predictable and show the utility of the concept through a direct synthesis of aryl piperazines. Our results contradict the notion, widely held by organic chemists, that radical aromatic substitution reactions are inherently unselective. The concept of radical substitution directed by charge transfer could serve as the basis for the development of new, highly selective C-H functionalization reactions.

  4. Copper-catalyzed direct C-H oxidative trifluoromethylation of heteroarenes.

    PubMed

    Chu, Lingling; Qing, Feng-Ling

    2012-01-18

    This article describes the copper-catalyzed oxidative trifluoromethylation of heteroarenes and highly electron-deficient arenes with CF(3)SiMe(3) through direct C-H activation. In the presence of catalyst Cu(OAc)(2), ligand 1,10-phenanthroline and cobases tert-BuONa/NaOAc, oxidative trifluoromethylation of 1,3,4-oxadiazoles with CF(3)SiMe(3) proceeded smoothly using either air or di-tert-butyl peroxide as an oxidant to give the corresponding trifluoromethylated 1,3,4-oxadiazoles in high yields. Di-tert-butyl peroxide was chosen as the suitable oxidant for oxidative trifluoromethylation of 1,3-azoles and perfluoroarenes. Cu(OH)(2) and Ag(2)CO(3) were the best catalyst and oxidant for direct oxidative trifluoromethyaltion of indoles. The optimum reaction conditions enable oxidative trifluoromethylation of a range of heteroarenes that bear numerous functional groups. The prepared trifluoromethylated heteroarenes are of importance in the areas of pharmaceuticals and agrochemicals. The preliminary mechanistic studies of these oxidative trifluoromethylations are also reported. PMID:22145831

  5. Iodine-catalyzed oxidative coupling reactions utilizing C - H and X - H as nucleophiles.

    PubMed

    Liu, Dong; Lei, Aiwen

    2015-04-01

    In recent decades, iodine-catalyzed oxidative coupling reactions utilizing C - H and X - H as nucleophiles have received considerable attention because they represent more efficient, greener, more atom-economical, and milder bond-formation strategies over transition-metal-catalyzed oxidative coupling reactions. This Focus Review gives a brief summary of recent development on iodine-catalyzed oxidative coupling reactions utilizing C - H and X - H as nucleophiles.

  6. Copper-Catalyzed Oxidative C-H Amination of Tetrahydrofuran with Indole/Carbazole Derivatives.

    PubMed

    Yang, Qingjing; Choy, Pui Ying; Fu, Wai Chung; Fan, Baomin; Kwong, Fuk Yee

    2015-11-01

    A simple α-C-H amination of cyclic ether with indole/carbazole derivatives has been accomplished by employing copper(II) chloride/bipy as the catalyst system. In the presence of the di-tert-butyl peroxide oxidant, cyclic ethers such as tetrahydrofuran, 1,4-dioxane, and tetrahydropyran successfully undergo C-H/N-H cross dehydrogenative coupling (CDC) with various carbazole or indole derivatives in good-to-excellent yields. PMID:26485515

  7. Molecular complexity via C-H activation: a dehydrogenative Diels-Alder reaction.

    PubMed

    Stang, Erik M; White, M Christina

    2011-09-28

    Traditionally, C-H oxidation reactions install oxidized functionality onto a preformed molecular skeleton, resulting in a local molecular change. The use of C-H activation chemistry to construct complex molecular scaffolds is a new area with tremendous potential in synthesis. We report a Pd(II)/bis-sulfoxide-catalyzed dehydrogenative Diels-Alder reaction that converts simple terminal olefins into complex cycloadducts in a single operation.

  8. AgONO-assisted direct C-H arylation of heteroarenes with anilines.

    PubMed

    Gowrisankar, Saravanan; Seayad, Jayasree

    2014-09-26

    A novel copper-catalyzed C-H arylation of heteroarenes with anilines by an in situ diazonium reaction is established by using silver nitrite (AgONO) as an unconventional nitrosating reagent under acid-free conditions. It provides a complementary approach for the C-H arylation of electron-rich heteroarenes with aromatic amines affording a variety of heterobiaryls in moderate to good yields. PMID:25137410

  9. Transition Metal-Free Selective Double sp(3) C-H Oxidation of Cyclic Amines to 3-Alkoxyamine Lactams.

    PubMed

    Osorio-Nieto, Urbano; Chamorro-Arenas, Delfino; Quintero, Leticia; Höpfl, Herbert; Sartillo-Piscil, Fernando

    2016-09-16

    The first chemical method for selective dual sp(3) C-H functionalization at the alpha-and beta positions of cyclic amines to their corresponding 3-alkoxyamine lactams is reported. Unlike traditional Cα-H oxidation of amines to amides mediated by transition metals, the present protocol, which involves the use of NaClO2/TEMPO/NaClO in either aqueous or organic solvent, not only allows the Cα-H oxidation but also the subsequent functionalization of the unreactive β-methylene group in an unprecedented tandem fashion and using environmentally friendly reactants.

  10. Direct Synthesis of Protoberberine Alkaloids by Rh-Catalyzed C-H Bond Activation as the Key Step.

    PubMed

    Jayakumar, Jayachandran; Cheng, Chien-Hong

    2016-01-26

    A one-pot reaction of substituted benzaldehydes with alkyne-amines by a Rh-catalyzed C-H activation and annulation to afford various natural and unnatural protoberberine alkaloids is reported. This reaction provides a convenient route for the generation of a compound library of protoberberine salts, which recently have attracted great attention because of their diverse biological activities. In addition, pyridinium salt derivatives can also be formed in good yields from α,β-unsaturated aldehydes and amino-alkynes. This reaction proceeds with excellent regioselectivity and good functional group compatibility under mild reaction conditions by using O2 as the oxidant. PMID:26689172

  11. Chelation-Assisted Nickel-Catalyzed Oxidative Annulation via Double C-H Activation/Alkyne Insertion Reaction.

    PubMed

    Misal Castro, Luis C; Obata, Atsushi; Aihara, Yoshinori; Chatani, Naoto

    2016-01-22

    A nickel/NHC system for regioselective oxidative annulation by double C-H bond activation and concomitant alkyne insertion is described. The catalytic reaction requires a bidentate directing group, such as an 8-aminoquinoline, embedded in the substrate. Various 5,6,7,8-tetrasubstituted-N-(quinolin-8-yl)-1-naphthamides can be prepared as well as phenanthrene and benzo[h]quinoline amide derivatives. Diarylalkynes, dialkylalkynes, and arylalkylalkynes can be used in the system. A Ni(0)/Ni(II) catalytic cycle is proposed as the main catalytic cycle. The alkyne plays a double role as a two-component coupling partner and as a hydrogen acceptor. PMID:26689750

  12. Transition Metal-Free Selective Double sp(3) C-H Oxidation of Cyclic Amines to 3-Alkoxyamine Lactams.

    PubMed

    Osorio-Nieto, Urbano; Chamorro-Arenas, Delfino; Quintero, Leticia; Höpfl, Herbert; Sartillo-Piscil, Fernando

    2016-09-16

    The first chemical method for selective dual sp(3) C-H functionalization at the alpha-and beta positions of cyclic amines to their corresponding 3-alkoxyamine lactams is reported. Unlike traditional Cα-H oxidation of amines to amides mediated by transition metals, the present protocol, which involves the use of NaClO2/TEMPO/NaClO in either aqueous or organic solvent, not only allows the Cα-H oxidation but also the subsequent functionalization of the unreactive β-methylene group in an unprecedented tandem fashion and using environmentally friendly reactants. PMID:27564379

  13. Direct Synthesis of Protoberberine Alkaloids by Rh-Catalyzed C-H Bond Activation as the Key Step.

    PubMed

    Jayakumar, Jayachandran; Cheng, Chien-Hong

    2016-01-26

    A one-pot reaction of substituted benzaldehydes with alkyne-amines by a Rh-catalyzed C-H activation and annulation to afford various natural and unnatural protoberberine alkaloids is reported. This reaction provides a convenient route for the generation of a compound library of protoberberine salts, which recently have attracted great attention because of their diverse biological activities. In addition, pyridinium salt derivatives can also be formed in good yields from α,β-unsaturated aldehydes and amino-alkynes. This reaction proceeds with excellent regioselectivity and good functional group compatibility under mild reaction conditions by using O2 as the oxidant.

  14. The azomethine ylide route to amine C-H functionalization: redox-versions of classic reactions and a pathway to new transformations.

    PubMed

    Seidel, Daniel

    2015-02-17

    Conspectus Redox-neutral methods for the functionalization of amine α-C-H bonds are inherently efficient because they avoid external oxidants and reductants and often do not generate unwanted byproducts. However, most of the current methods for amine α-C-H bond functionalization are oxidative in nature. While the most efficient variants utilize atmospheric oxygen as the terminal oxidant, many such transformations require the use of expensive or toxic oxidants, often coupled with the need for transition metal catalysts. Redox-neutral amine α-functionalizations that involve intramolecular hydride transfer steps provide viable alternatives to certain oxidative reactions. These processes have been known for some time and are particularly well suited for tertiary amine substrates. A mechanistically distinct strategy for secondary amines has emerged only recently, despite sharing common features with a range of classic organic transformations. Among those are such widely used reactions as the Strecker, Mannich, Pictet-Spengler, and Kabachnik-Fields reactions, Friedel-Crafts alkylations, and iminium alkynylations. In these classic processes, condensation of a secondary amine with an aldehyde (or a ketone) typically leads to the formation of an intermediate iminium ion, which is subsequently attacked by a nucleophile. The corresponding redox-versions of these transformations utilize identical starting materials but incorporate an isomerization step that enables α-C-H bond functionalization. Intramolecular versions of these reactions include redox-neutral amine α-amination, α-oxygenation, and α-sulfenylation. In all cases, a reductive N-alkylation is effectively combined with an oxidative α-functionalization, generating water as the only byproduct. Reactions are promoted by simple carboxylic acids and in some cases require no additives. Azomethine ylides, dipolar species whose usage is predominantly in [3 + 2] cycloadditions and other pericyclic processes, have been

  15. The azomethine ylide route to amine C-H functionalization: redox-versions of classic reactions and a pathway to new transformations.

    PubMed

    Seidel, Daniel

    2015-02-17

    Conspectus Redox-neutral methods for the functionalization of amine α-C-H bonds are inherently efficient because they avoid external oxidants and reductants and often do not generate unwanted byproducts. However, most of the current methods for amine α-C-H bond functionalization are oxidative in nature. While the most efficient variants utilize atmospheric oxygen as the terminal oxidant, many such transformations require the use of expensive or toxic oxidants, often coupled with the need for transition metal catalysts. Redox-neutral amine α-functionalizations that involve intramolecular hydride transfer steps provide viable alternatives to certain oxidative reactions. These processes have been known for some time and are particularly well suited for tertiary amine substrates. A mechanistically distinct strategy for secondary amines has emerged only recently, despite sharing common features with a range of classic organic transformations. Among those are such widely used reactions as the Strecker, Mannich, Pictet-Spengler, and Kabachnik-Fields reactions, Friedel-Crafts alkylations, and iminium alkynylations. In these classic processes, condensation of a secondary amine with an aldehyde (or a ketone) typically leads to the formation of an intermediate iminium ion, which is subsequently attacked by a nucleophile. The corresponding redox-versions of these transformations utilize identical starting materials but incorporate an isomerization step that enables α-C-H bond functionalization. Intramolecular versions of these reactions include redox-neutral amine α-amination, α-oxygenation, and α-sulfenylation. In all cases, a reductive N-alkylation is effectively combined with an oxidative α-functionalization, generating water as the only byproduct. Reactions are promoted by simple carboxylic acids and in some cases require no additives. Azomethine ylides, dipolar species whose usage is predominantly in [3 + 2] cycloadditions and other pericyclic processes, have been

  16. Tunneling conductance of amine-linked alkyl chains.

    PubMed

    Prodan, Emil; Car, Roberto

    2008-06-01

    The tunneling transport theory developed in ref 9 (Phys. Rev. B 2007, 76, 115102) is applied to molecular devices made of alkyl chains linked to gold electrodes via amine groups. Using the analytic expression of the tunneling conductance derived in our previous work, we identify the key physical quantities that characterize the conductance of these devices. By investigating the transport characteristics of three devices, containing four, six, and eight methyl groups, we extract the dependence of the tunneling conductance on the chain's length, which is an exponential decay law in agreement with recent experimental data.

  17. Influence of the alkyl chain length on the fluorescence properties of N-alkyl-2,3-naphthalimides included in β-cyclodextrin

    NASA Astrophysics Data System (ADS)

    Vieira Ferreira, Luis Filipe; Lemos, Maria João; Wintgens, Véronique; Netto-Ferreira, José Carlos

    1999-06-01

    Absorption spectra of N-alkyl-2,3-naphthalimides (1, R=CH3; 2,: R=n-C6H13; 3, R=n-C12H25; 4, R=n-C18H37) show absorption maximum independent of the alkyl chain length but dependent on the nature of the solvent. In the polar aprotic solvent acetonitrile N-alkyl-2,3-naphthalimides 1-4 exhibit a vibrationally resolved fluorescence emission, while in polar protic solvents (methanol or water) their fluorescence is broad and shows a bathochromic shift when compared to the one in acetonitrile. This behaviour is in agreement with previously reported data on N-methyl-2,3-naphthalimide. By the addition of aqueous solutions of β-cyclodextrin (β-CD) (concentration ranging from 1×10-3 to 1×10-2 M) to an aqueous solution of the probe, a hypsochromic shift and a strong increase of the fluorescence intensity were observed for short, i.e. 1, and long alkyl chains, i.e. 2-4. From these data we can conclude that an inclusion complex between 1-4 and β-CD is formed. The inclusion geometry for these complexes is dramatically affected by the alkyl chain length. Thus, for the short chain N-alkyl-2,3-naphthalimide, 1, a broad emission is revealed, whereas for long chains, 2-4, a vibrationally structured emission was observed. This indicates a tighter geometry for the latter case, which is a consequence of the inclusion of both the naphthalimide moiety and the alkyl group into the β-CD cavity.

  18. N-Alkylation by Hydrogen Autotransfer Reactions.

    PubMed

    Ma, Xiantao; Su, Chenliang; Xu, Qing

    2016-06-01

    Owing to the importance of amine/amide derivatives in all fields of chemistry, and also the green and environmentally benign features of using alcohols as alkylating reagents, the relatively high atom economic dehydrative N-alkylation reactions of amines/amides with alcohols through hydrogen autotransfer processes have received much attention and have developed rapidly in recent decades. Various efficient homogeneous and heterogeneous transition metal catalysts, nano materials, electrochemical methods, biomimetic methods, asymmetric N-alkylation reactions, aerobic oxidative methods, and even certain transition metal-free, catalyst-free, or autocatalyzed methods, have also been developed in recent years. With a brief introduction to the background and developments in this area of research, this chapter focuses mainly on recent progress and technical and conceptual advances contributing to the development of this research in the last decade. In addition to mainstream research on homogeneous and heterogeneous transition metal-catalyzed reactions, possible mechanistic routes for hydrogen transfer and alcohol activation, which are key processes in N-alkylation reactions but seldom discussed in the past, the recent reports on computational mechanistic studies of the N-alkylation reactions, and the newly emerged N-alkylation methods based on novel alcohol activation protocols such as air-promoted reactions and transition metal-free methods, are also reviewed in this chapter. Problems and bottlenecks that remained to be solved in the field, and promising new research that deserves greater future attention and effort, are also reviewed and discussed.

  19. N-Alkylation by Hydrogen Autotransfer Reactions.

    PubMed

    Ma, Xiantao; Su, Chenliang; Xu, Qing

    2016-06-01

    Owing to the importance of amine/amide derivatives in all fields of chemistry, and also the green and environmentally benign features of using alcohols as alkylating reagents, the relatively high atom economic dehydrative N-alkylation reactions of amines/amides with alcohols through hydrogen autotransfer processes have received much attention and have developed rapidly in recent decades. Various efficient homogeneous and heterogeneous transition metal catalysts, nano materials, electrochemical methods, biomimetic methods, asymmetric N-alkylation reactions, aerobic oxidative methods, and even certain transition metal-free, catalyst-free, or autocatalyzed methods, have also been developed in recent years. With a brief introduction to the background and developments in this area of research, this chapter focuses mainly on recent progress and technical and conceptual advances contributing to the development of this research in the last decade. In addition to mainstream research on homogeneous and heterogeneous transition metal-catalyzed reactions, possible mechanistic routes for hydrogen transfer and alcohol activation, which are key processes in N-alkylation reactions but seldom discussed in the past, the recent reports on computational mechanistic studies of the N-alkylation reactions, and the newly emerged N-alkylation methods based on novel alcohol activation protocols such as air-promoted reactions and transition metal-free methods, are also reviewed in this chapter. Problems and bottlenecks that remained to be solved in the field, and promising new research that deserves greater future attention and effort, are also reviewed and discussed. PMID:27573267

  20. Preparation and reactivity of macrocyclic rhodium(III) alkyl complexes

    SciTech Connect

    Carraher, Jack M.; Ellern, Arkady; Bakac, Andreja

    2013-09-21

    We found that the macrocyclic rhodium(II) complexes LRh(H2O)2+ (L = L1 = cyclam and L2 = meso-Me-6-cyclam) react with alkyl hydroperoxides RC(CH3)2OOH to generate the corresponding rhodium(III) alkyls L(H2O)RhR2+ (R = CH3, C2H5, PhCH2). Methyl and benzyl complexes can also be prepared by bimolecular group transfer from alkyl cobaloximes (dmgH)2(H2O) CoR and (dmgBF2)2(H2O) CoR (R = CH3, PhCH2) to LRh(H2O)2+. Moreover, the new complexes were characterized by solution NMR and by crystal structure analysis. They exhibit great stability in aqueous solution at room temperature, but undergo efficient Rh-C bond cleavage upon photolysis.

  1. C8-Selective Acylation of Quinoline N-Oxides with α-Oxocarboxylic Acids via Palladium-Catalyzed Regioselective C-H Bond Activation.

    PubMed

    Chen, Xiaopei; Cui, Xiuling; Wu, Yangjie

    2016-08-01

    A facile and efficient protocol for palladium-catalyzed C8-selective acylation of quinoline N-oxides with α-oxocarboxylic acids has been developed. In this approach, N-oxide was utilized as a stepping stone for the remote C-H functionalization. The reactions proceeded efficiently under mild reaction conditions with excellent regioselectivity and broad functional group tolerance. PMID:27441527

  2. Low-valent niobium-mediated double activation of C-F/C-H bonds: fluorene synthesis from o-arylated alpha,alpha,alpha-trifluorotoluene derivatives.

    PubMed

    Fuchibe, Kohei; Akiyama, Takahiko

    2006-02-01

    By the treatment of 0.3 molar amount of NbCl5 and LiAlH4, o-arylated alpha,alpha,alpha-trifluorotoluenes afforded fluorene derivatives in good yields. C-F bonds of the CF3 group and the neighboring ortho C-H bond were doubly activated to give the coupling products. PMID:16448098

  3. Physico-chemical properties and toxicity of alkylated polycyclic aromatic hydrocarbons.

    PubMed

    Kang, Hyun-Joong; Lee, So-Young; Kwon, Jung-Hwan

    2016-07-15

    Crude oil and refined petroleum products contain many polycyclic and heterocyclic aromatic hydrocarbons, in particular, alkylated PAHs. Although alkylated PAHs are found in significantly higher quantities than their corresponding unsubstituted PAHs, the most studies on the physico-chemical properties and toxicities of these compounds have been conducted on unsubstituted PAHs. In this study, we measured crucial physico-chemical properties (i.e., water solubility, partition coefficients between polydimethylsiloxane and water (KPDMSw), and partition coefficient between liposomes and water (Klipw)) of selected alkylated PAHs, and evaluated their toxicity using the luminescence inhibition of Aliivibrio fischeri and growth inhibition of Raphidocelis subcapitata. In general, the logarithms of these properties for alkylated PAHs showed good linear correlations with log Kow, as did those for unsubstituted PAHs. Changes in molecular symmetry on the introduction of alkyl groups on aromatic ring structure significantly altered water solubility. The inhibition of bacterial luminescence and algal growth by alkylated PAHs can be explained well by the baseline toxicity hypothesis, and good linear relationships between log Kow or log Klipw and log (1/EC50) were found.

  4. Effect of C-H ⋯ S and C-H ⋯ Cl interactions on the conformational preference of inhibitors of TIBO family

    NASA Astrophysics Data System (ADS)

    Freitas, Renato F.; Galembeck, Sérgio E.

    2006-05-01

    he non-nucleoside inhibitors of HIV-1 reverse transcriptase (NNRTIs) are an important class of drugs employed in antiviral therapy. The coordinates of three inhibitors, derived from TIBO, tetrahydroimidazo-(4,5,1-1- jk)(1,4)-benzodi-azepin-2(1 H)-one (which belongs to the NNRTIs class), were taken from PDB database and the electronic structure were investigated by using the B3LYP/6-31+G(d,p) model. Results obtained by means of the natural bond orbital (NBO) and atoms in molecules (AIM) methods indicated the presence of weak hydrogen bonds of the C-H ⋯ S and C-H ⋯ Cl type, which are partially responsible for the conformational differences observed between the inhibitors 8 Cl-TIBO and 9 Cl-TIBO.

  5. Methods and Mechanisms for Cross-Electrophile Coupling of Csp2 Halides with Alkyl Electrophiles

    PubMed Central

    2016-01-01

    Conspectus Cross-electrophile coupling, the cross-coupling of two different electrophiles, avoids the need for preformed carbon nucleophiles, but development of general methods has lagged behind cross-coupling and C–H functionalization. A central reason for this slow development is the challenge of selectively coupling two substrates that are alike in reactivity. This Account describes the discovery of generally cross-selective reactions of aryl halides and acyl halides with alkyl halides, the mechanistic studies that illuminated the underlying principles of these reactions, and the use of these fundamental principles in the rational design of new cross-electrophile coupling reactions. Although the coupling of two different electrophiles under reducing conditions often leads primarily to symmetric dimers, the subtle differences in reactivity of aryl halides and alkyl halides with nickel catalysts allowed for generally cross-selective coupling reactions. These conditions could also be extended to the coupling of acyl halides with alkyl halides. These reactions are exceptionally functional group tolerant and can be assembled on the benchtop. A combination of stoichiometric and catalytic studies on the mechanism of these reactions revealed an unusual radical-chain mechanism and suggests that selectivity arises from (1) the preference of nickel(0) for oxidative addition to aryl halides and acyl halides over alkyl halides and (2) the greater propensity of alkyl halides to form free radicals. Bipyridine-ligated arylnickel intermediates react with alkyl radicals to efficiently form, after reductive elimination, new C–C bonds. Finally, the resulting nickel(I) species is proposed to regenerate an alkyl radical to carry the chain. Examples of new reactions designed using these principles include carbonylative coupling of aryl halides with alkyl halides to form ketones, arylation of epoxides to form β-aryl alcohols, and coupling of benzyl sulfonate esters with aryl

  6. Copper-catalyzed reductive cross-coupling of nonactivated alkyl tosylates and mesylates with alkyl and aryl bromides.

    PubMed

    Liu, Jing-Hui; Yang, Chu-Ting; Lu, Xiao-Yu; Zhang, Zhen-Qi; Xu, Ling; Cui, Mian; Lu, Xi; Xiao, Bin; Fu, Yao; Liu, Lei

    2014-11-17

    A copper-catalyzed reductive cross-coupling reaction of nonactivated alkyl tosylates and mesylates with alkyl and aryl bromides was developed. It provides a practical method for efficient and cost-effective construction of aryl-alkyl and alkyl-alkyl CC bonds with stereocontrol from readily available substrates. When used in an intramolecular fashion, the reaction enables convenient access to various substituted carbo- or heterocycles, such as 2,3-dihydrobenzofuran and benzochromene derivatives.

  7. Graphene-Catalyzed Direct Friedel-Crafts Alkylation Reactions: Mechanism, Selectivity, and Synthetic Utility.

    PubMed

    Hu, Feng; Patel, Mehulkumar; Luo, Feixiang; Flach, Carol; Mendelsohn, Richard; Garfunkel, Eric; He, Huixin; Szostak, Michal

    2015-11-18

    Transition-metal-catalyzed alkylation reactions of arenes have become a central transformation in organic synthesis. Herein, we report the first general strategy for alkylation of arenes with styrenes and alcohols catalyzed by carbon-based materials, exploiting the unique property of graphenes to produce valuable diarylalkane products in high yields and excellent regioselectivity. The protocol is characterized by a wide substrate scope and excellent functional group tolerance. Notably, this process constitutes the first general application of graphenes to promote direct C-C bond formation utilizing polar functional groups anchored on the GO surface, thus opening the door for an array of functional group alkylations using benign and readily available graphene materials. Mechanistic studies suggest that the reaction proceeds via a tandem catalysis mechanism in which both of the coupling partners are activated by interaction with the GO surface. PMID:26496423

  8. DNA sequence-specific adenine alkylation by the novel antitumor drug tallimustine (FCE 24517), a benzoyl nitrogen mustard derivative of distamycin.

    PubMed Central

    Broggini, M; Coley, H M; Mongelli, N; Pesenti, E; Wyatt, M D; Hartley, J A; D'Incalci, M

    1995-01-01

    FCE 24517, a novel distamycin derivative possessing potent antitumor activity, is under initial clinical investigation in Europe. In spite of the presence of a benzoyl nitrogen mustard group this compound fails to alkylate the N7 position of guanine, the major site of alkylation by conventional nitrogen mustards. Characterisation of DNA-drug adducts revealed only a very low level of adenine adduct formation. Using a modified Maxam-Gilbert sequencing method the consensus sequence for FCE 24517-adenine adduct formation was found to be 5'-TTTTGA-3'. A single base modification in the hexamer completely abolishes the alkylation of adenine. Using a Taq polymerase stop assay alkylations were confirmed at the A present in the hexamer TTTTGA and, in addition, in one out of three TTTTAA sequences present in the plasmid utilized. The sequence specificity of alkylation by FCE 24517 is therefore the most striking yet observed for an alkylating agent of small molecular weight. Images PMID:7870593

  9. Solution and solid-state study of the structure of azo-coupling products from isomeric enaminones possessing tert-butyl group: An unprecedented observation of pure hydrazo form in azo coupled N-alkyl β-enaminones

    NASA Astrophysics Data System (ADS)

    Šimůnek, Petr; Padělková, Zdeňka; Macháček, Vladimír

    2014-10-01

    The structure of the azo-coupling products from enaminones derived from 4,4-dimethyl-1-phenylpentane-1,3-dione has been studied by means of solution-state 1H, 13C and 15N NMR spectroscopy and X-ray diffractometry. The presence of bulky tert-butyl group hinders or even prevents from the formation of planar conjugated heterodiene system Hsbnd Nsbnd Cdbnd Csbnd Ndbnd N with an intramolecular hydrogen bond Nsbnd H⋯Ndbnd which is the prerequisite for fast tautomeric exchange imino-hydrazo - enamino-azo. The minor amount of azo compounds is formed by a proton exchange through a hydrogen bond Nsbnd H⋯N, which is either intramolecular (in solution) or intermolecular (solid state). The intermolecular exchange proceeds via the dimers of the azo coupling products. This is unprecedented result among the similar molecules hitherto studied.

  10. Neighbor-directed histidine N (τ)-alkylation: A route to imidazolium-containing phosphopeptide macrocycles.

    PubMed

    Qian, Wen-Jian; Park, Jung-Eun; Grant, Robert; Lai, Christopher C; Kelley, James A; Yaffe, Michael B; Lee, Kyung S; Burke, Terrence R

    2015-11-01

    Our recently discovered, selective, on-resin route to N(τ)-alkylated imidazolium-containing histidine residues affords new strategies for peptide mimetic design. In this, we demonstrate the use of this chemistry to prepare a series of macrocyclic phosphopeptides, in which imidazolium groups serve as ring-forming junctions. Interestingly, these cationic moieties subsequently serve to charge-mask the phosphoamino acid group that directed their formation. Neighbor-directed histidine N(τ)-alkylation opens the door to new families of phosphopeptidomimetics for use in a range of chemical biology contexts.

  11. Neighbor-directed histidine N(τ) alkylation. A route to imidazolium-containing phosphopeptide macrocycles

    SciTech Connect

    Qian, Wen-Jian; Park, Jung-Eun; Grant, Robert; Lai, Christopher C.; Kelley, James A.; Yaffe, Michael B.; Lee, Kyung S.; Burke, Terrence R.

    2015-07-07

    Our recently discovered, selective, on-resin route to N(τ)-alkylated imidazolium-containing histidine residues affords new strategies for peptide mimetic design. In this, we demonstrate the use of this chemistry to prepare a series of macrocyclic phosphopeptides, in which imidazolium groups serve as ring-forming junctions. These cationic moieties subsequently serve to charge-mask the phosphoamino acid group that directed their formation. Furthermore, neighbor-directed histidine N(τ)-alkylation opens the door to new families of phosphopeptidomimetics for use in a range of chemical biology contexts.

  12. Thermodynamic Interactions between Polystyrene and Long-Chain Poly(n-Alkyl Acrylates) Derived from Plant Oils.

    PubMed

    Wang, Shu; Robertson, Megan L

    2015-06-10

    Vegetable oils and their fatty acids are promising sources for the derivation of polymers. Long-chain poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) are readily derived from fatty acids through conversion of the carboxylic acid end-group to an acrylate or methacrylate group. The resulting polymers contain long alkyl side-chains with around 10-22 carbon atoms. Regardless of the monomer source, the presence of alkyl side-chains in poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) provides a convenient mechanism for tuning their physical properties. The development of structured multicomponent materials, including block copolymers and blends, containing poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) requires knowledge of the thermodynamic interactions governing their self-assembly, typically described by the Flory-Huggins interaction parameter χ. We have investigated the χ parameter between polystyrene and long-chain poly(n-alkyl acrylate) homopolymers and copolymers: specifically we have included poly(stearyl acrylate), poly(lauryl acrylate), and their random copolymers. Lauryl and stearyl acrylate were chosen as model alkyl acrylates derived from vegetable oils and have alkyl side-chain lengths of 12 and 18 carbon atoms, respectively. Polystyrene is included in this study as a model petroleum-sourced polymer, which has wide applicability in commercially relevant multicomponent polymeric materials. Two independent methods were employed to measure the χ parameter: cloud point measurements on binary blends and characterization of the order-disorder transition of triblock copolymers, which were in relatively good agreement with one another. The χ parameter was found to be independent of the alkyl side-chain length (n) for large values of n (i.e., n > 10). This behavior is in stark contrast to the n-dependence of the χ parameter predicted from solubility parameter theory. Our study complements prior work investigating the interactions between

  13. Facile P-C/C-H Bond-Cleavage Reactivity of Nickel Bis(diphosphine) Complexes.

    PubMed

    Zhang, Shaoguang; Li, Haixia; Appel, Aaron M; Hall, Michael B; Bullock, R Morris

    2016-07-01

    Unusual cleavage of P-C and C-H bonds of the P2 N2 ligand, in heteroleptic [Ni(P2 N2 )(diphosphine)](2+) complexes under mild conditions, results in the formation of an iminium formyl nickelate featuring a C,P,P-tridentate coordination mode. The structures of both the heteroleptic [Ni(P2 N2 )(diphosphine)](2+) complexes and the resulting iminium formyl nickelate have been characterized by NMR spectroscopy and single-crystal X-ray diffraction analysis. Density functional theory (DFT) calculations were employed to investigate the mechanism of the P-C/C-H bond cleavage, which involves C-H bond cleavage, hydride rotation, Ni-C/P-H bond formation, and P-C bond cleavage. PMID:27189413

  14. Erosion of a-C:H films under interaction with nitrous oxide afterglow discharge

    NASA Astrophysics Data System (ADS)

    Zalavutdinov, R. Kh.; Gorodetsky, A. E.; Bukhovets, V. L.; Zakharov, A. P.; Mazul, I. V.

    2009-06-01

    Hydrocarbon film removal using chemically active oxygen formed in a direct current glow discharge with a hollow cathode in nitrous oxide was investigated. In the afterglow region sufficiently fast removal of a-C:H films about 500 nm thick during about 8 h was achieved at N 2O pressure of 12 Pa and 370 K. The erosion rate in the afterglow region was directly proportional to the initial pressure and increased two orders of magnitude at temperature rising from 300 to 500 K. The products of a-C:H film plasmolysis were CO, CO 2, H 2O, and H 2. After removal of a-C:H films previously deposited on stainless steel, molybdenum or tungsten 3-30 nm thick oxide films were formed on the substrates. Reactions of oxygen ion neutralization and atomic oxygen recombination suppressed further oxidation of the materials.

  15. Ligand-Promoted Meta-C-H Arylation of Anilines, Phenols, and Heterocycles.

    PubMed

    Wang, Peng; Farmer, Marcus E; Huo, Xing; Jain, Pankaj; Shen, Peng-Xiang; Ishoey, Mette; Bradner, James E; Wisniewski, Steven R; Eastgate, Martin D; Yu, Jin-Quan

    2016-07-27

    Here we report the development of a versatile 3-acetylamino-2-hydroxypyridine class of ligands that promote meta-C-H arylation of anilines, heterocyclic aromatic amines, phenols, and 2-benzyl heterocycles using norbornene as a transient mediator. More than 120 examples are presented, demonstrating this ligand scaffold enables a wide substrate and coupling partner scope. Meta-C-H arylation with heterocyclic aryl iodides as coupling partners is also realized for the first time using this ligand. The utility for this transformation for drug discovery is showcased by allowing the meta-C-H arylation of a lenalidomide derivative. The first steps toward a silver-free protocol for this reaction are also demonstrated. PMID:27384126

  16. A steric tethering approach enables palladium-catalysed C-H activation of primary amino alcohols.

    PubMed

    Calleja, Jonas; Pla, Daniel; Gorman, Timothy W; Domingo, Victoriano; Haffemayer, Benjamin; Gaunt, Matthew J

    2015-12-01

    Aliphatic primary amines are a class of chemical feedstock essential to the synthesis of higher-order nitrogen-containing molecules, commonly found in biologically active compounds and pharmaceutical agents. New methods for the construction of complex amines remain a continuous challenge to synthetic chemists. Here, we outline a general palladium-catalysed strategy for the functionalization of aliphatic C-H bonds within amino alcohols, an important class of small molecule. Central to this strategy is the temporary conversion of catalytically incompatible primary amino alcohols into hindered secondary amines that are capable of undergoing a sterically promoted palladium-catalysed C-H activation. Furthermore, a hydrogen bond between amine and catalyst intensifies interactions around the palladium and orients the aliphatic amine substituents in an ideal geometry for C-H activation. This catalytic method directly transforms simple, easily accessible amines into highly substituted, functionally concentrated and structurally diverse products, and can streamline the synthesis of biologically important amine-containing molecules.

  17. Copper-catalyzed aerobic oxidative C-H functionalizations: trends and mechanistic insights.

    PubMed

    Wendlandt, Alison E; Suess, Alison M; Stahl, Shannon S

    2011-11-18

    The selective oxidation of C-H bonds and the use of O(2) as a stoichiometric oxidant represent two prominent challenges in organic chemistry. Copper(II) is a versatile oxidant, capable of promoting a wide range of oxidative coupling reactions initiated by single-electron transfer (SET) from electron-rich organic molecules. Many of these reactions can be rendered catalytic in Cu by employing molecular oxygen as a stoichiometric oxidant to regenerate the active copper(II) catalyst. Meanwhile, numerous other recently reported Cu-catalyzed C-H oxidation reactions feature substrates that are electron-deficient or appear unlikely to undergo single-electron transfer to copper(II). In some of these cases, evidence has been obtained for the involvement of organocopper(III) intermediates in the reaction mechanism. Organometallic C-H oxidation reactions of this type represent important new opportunities for the field of Cu-catalyzed aerobic oxidations. PMID:22034061

  18. A steric tethering approach enables palladium-catalysed C-H activation of primary amino alcohols

    NASA Astrophysics Data System (ADS)

    Calleja, Jonas; Pla, Daniel; Gorman, Timothy W.; Domingo, Victoriano; Haffemayer, Benjamin; Gaunt, Matthew J.

    2015-12-01

    Aliphatic primary amines are a class of chemical feedstock essential to the synthesis of higher-order nitrogen-containing molecules, commonly found in biologically active compounds and pharmaceutical agents. New methods for the construction of complex amines remain a continuous challenge to synthetic chemists. Here, we outline a general palladium-catalysed strategy for the functionalization of aliphatic C-H bonds within amino alcohols, an important class of small molecule. Central to this strategy is the temporary conversion of catalytically incompatible primary amino alcohols into hindered secondary amines that are capable of undergoing a sterically promoted palladium-catalysed C-H activation. Furthermore, a hydrogen bond between amine and catalyst intensifies interactions around the palladium and orients the aliphatic amine substituents in an ideal geometry for C-H activation. This catalytic method directly transforms simple, easily accessible amines into highly substituted, functionally concentrated and structurally diverse products, and can streamline the synthesis of biologically important amine-containing molecules.

  19. Alkyl phosphonic acids and sulfonic acids in the Murchison meteorite

    NASA Technical Reports Server (NTRS)

    Cooper, George W.; Onwo, Wilfred M.; Cronin, John R.

    1992-01-01

    Homologous series of alkyl phosphonic acids and alkyl sulfonic acids, along with inorganic orthophosphate and sulfate, are identified in water extracts of the Murchison meteorite after conversion to their t-butyl dimethylsilyl derivatives. The methyl, ethyl, propyl, and butyl compounds are observed in both series. Five of the eight possible alkyl phosphonic acids and seven of the eight possible alkyl sulfonic acids through C4 are identified. Abundances decrease with increasing carbon number as observed of other homologous series indigenous to Murchison. Concentrations range downward from approximately 380 nmol/gram in the alkyl sulfonic acid series, and from 9 nmol/gram in the alkyl phosphonic acid series.

  20. Self-organization of surfactant molecules on solid surface: an STM study of sodium alkyl sulfonates [rapid communication

    NASA Astrophysics Data System (ADS)

    Yin, Xiu-Li; Wan, Li-Jun; Yang, Zheng-Yu; Yu, Jia-Yong

    2005-02-01

    Adsorption and self-organization of sodium alkyl sulfonates (STS and SHS) on HOPG have been studied by using in situ scanning tunneling microscopy (STM). Both SHS and STS molecules adsorb on HOPG surface and form long-range well-ordered monolayers. The molecular rows and the axes of alkyl chain of the molecules cross each other at angles of 60° and 90° in the STS and SHS layers, respectively. Molecular details such as sulfonate functional group (head) and alkyl chain are clearly imaged. The neighboring molecules in different rows form a "head to head" configuration. Structural models for the molecular arrangement of the two adlayers are proposed.

  1. Catalytic borylation of SCF₃-functionalized arenes by rhodium(I) boryl complexes: regioselective C-H activation at the ortho-position.

    PubMed

    Kalläne, Sabrina I; Braun, Thomas

    2014-08-25

    An unprecedented reaction pathway for the borylation of SCF3-containing arenes using [Rh(Bpin)(PEt3)3] (pin=pinacolato) is reported. Catalytic processes were developed and the functionalizations proceed under mild reaction conditions. The C-H activations occur with a unique regioselectivity for the position ortho to the SCF3 group, which apparently serves as directing group. Borylated SCF3 compounds can serve as versatile building blocks. PMID:25088814

  2. Aspects of C-H Activation in Metal Complexes Containing Sulfur Ligands

    SciTech Connect

    Rakowski-DuBois, Mary C.

    2004-10-08

    those of related Cp-molybdenum complexes with sulfide ligands, which also activate hydrogen, but generally form hydrosulfido products without H2S elimination. C-H and C-S Cleavage Reactions. New mononuclear Cp{prime}Re(dithiolate) complexes such as Cp{prime}ReCl2(SC2H4S), 1, have been prepared and characterized and have been found to display a very interesting range of reactions. The thermal reaction of 1 involves the dehydrogenation of the alkanedithiolate ligand to form Cp{prime}ReCl2(SCH=CHS), 2 as well as a competing elimination of olefin from the dithiolate ligand in 1. On the basic of kinetic and related studies, the mechanism is proposed to involve a sequential series of reactions. In the first reaction, the olefin extrusion is proposed to produce a reactive Re-disulfide or Re-bis(sulfido) intermediate, CpReCl2S2 which serves as an oxidant for the dithiolate complex 1. The ability of the bis sulfido complex to dehydrogenate hydrocarbons is a unique feature and several additional dehydrogenation reactions with this system have been characterized, including the oxidation of other dithiolate complexes, of tetrahydro-naphthalene and of cyclohexadiene. Precedents for the role of metal sulfides in dehydrogenation reactions have been reported for heterogeneous metal sulfide surfaces. This work has begun to provide information about the electronic and structural features necessary for such reactivity. Carbon Sulfur Bond Formation. When the thermal reaction of 1 was carried out in the presence of excess dry ethene a new reaction was observed in which the dithiolate ligand is displaced by incoming olefin to form the cyclic organic product, 1,4-dithiane. The Re product is identified as Cp{prime}Re(alkene)Cl2 on the basis of NMR and mass spectroscopic data. Similar reactions with alkynes have been found to form unsaturated 6-membered rings and reactions with 1,3 dithiolate complexes form the organic 7-membered rings. To our knowledge the formation of cyclic bis-thioethers by

  3. Catalytic Intramolecular Ketone Alkylation with Olefins by Dual Activation.

    PubMed

    Lim, Hee Nam; Dong, Guangbin

    2015-12-01

    Two complementary methods for catalytic intramolecular ketone alkylation reactions with unactivated olefins, resulting in Conia-ene-type reactions, are reported. The transformations are enabled by dual activation of both the ketone and the olefin and are atom-economical as stoichiometric oxidants or reductants are not required. Assisted by Kool's aniline catalyst, the reaction conditions can be both pH- and redox-neutral. A broad range of functional groups are thus tolerated. Whereas the rhodium catalysts are effective for the formation of five-membered rings, a ruthenium-based system that affords the six-membered ring products was also developed.

  4. Amine synthesis via iron-catalysed reductive coupling of nitroarenes with alkyl halides

    NASA Astrophysics Data System (ADS)

    Cheung, Chi Wai; Hu, Xile

    2016-08-01

    (Hetero)Aryl amines, an important class of organic molecules in medicinal chemistry, are most commonly synthesized from anilines, which are in turn synthesized by hydrogenation of nitroarenes. Amine synthesis directly from nitroarenes is attractive due to improved step economy and functional group compatibility. Despite these potential advantages, there is yet no general method for the synthesis of (hetero)aryl amines by carbon-nitrogen cross-coupling of nitroarenes. Here we report the reductive coupling of nitroarenes with alkyl halides to yield (hetero)aryl amines. A simple iron catalyst enables the coupling with numerous primary, secondary and tertiary alkyl halides. Broad scope and high functional group tolerance are demonstrated. Mechanistic study suggests that nitrosoarenes and alkyl radicals are involved as intermediates. This new C-N coupling method provides general and step-economical access to aryl amines.

  5. Amine synthesis via iron-catalysed reductive coupling of nitroarenes with alkyl halides

    PubMed Central

    Cheung, Chi Wai; Hu, Xile

    2016-01-01

    (Hetero)Aryl amines, an important class of organic molecules in medicinal chemistry, are most commonly synthesized from anilines, which are in turn synthesized by hydrogenation of nitroarenes. Amine synthesis directly from nitroarenes is attractive due to improved step economy and functional group compatibility. Despite these potential advantages, there is yet no general method for the synthesis of (hetero)aryl amines by carbon–nitrogen cross-coupling of nitroarenes. Here we report the reductive coupling of nitroarenes with alkyl halides to yield (hetero)aryl amines. A simple iron catalyst enables the coupling with numerous primary, secondary and tertiary alkyl halides. Broad scope and high functional group tolerance are demonstrated. Mechanistic study suggests that nitrosoarenes and alkyl radicals are involved as intermediates. This new C–N coupling method provides general and step-economical access to aryl amines. PMID:27515391

  6. Amine synthesis via iron-catalysed reductive coupling of nitroarenes with alkyl halides.

    PubMed

    Cheung, Chi Wai; Hu, Xile

    2016-01-01

    (Hetero)Aryl amines, an important class of organic molecules in medicinal chemistry, are most commonly synthesized from anilines, which are in turn synthesized by hydrogenation of nitroarenes. Amine synthesis directly from nitroarenes is attractive due to improved step economy and functional group compatibility. Despite these potential advantages, there is yet no general method for the synthesis of (hetero)aryl amines by carbon-nitrogen cross-coupling of nitroarenes. Here we report the reductive coupling of nitroarenes with alkyl halides to yield (hetero)aryl amines. A simple iron catalyst enables the coupling with numerous primary, secondary and tertiary alkyl halides. Broad scope and high functional group tolerance are demonstrated. Mechanistic study suggests that nitrosoarenes and alkyl radicals are involved as intermediates. This new C-N coupling method provides general and step-economical access to aryl amines. PMID:27515391

  7. Ruthenium(II)-catalyzed oxidative C-H alkenylations of sulfonic acids, sulfonyl chlorides and sulfonamides.

    PubMed

    Ma, Wenbo; Mei, Ruhuai; Tenti, Giammarco; Ackermann, Lutz

    2014-11-10

    Twofold C-H functionalization of aromatic sulfonic acids was achieved with an in situ generated ruthenium(II) catalyst. The optimized cross-dehydrogenative alkenylation protocol proved applicable to differently substituted arenes and a variety of alkenes, including vinyl arenes, sulfones, nitriles and ketones. The robustness of the ruthenium(II) catalyst was demonstrated by the chemoselective oxidative olefination of sulfonamides as well as sulfonyl chlorides. Mechanistic studies provided support for a reversible, acetate-assisted C-H ruthenation, along with a subsequent olefin insertion.

  8. Anomalous reversal of C-H and C-D quenching efficiencies in luminescent praseodymium cryptates.

    PubMed

    Scholten, Julia; Rosser, Geraldine A; Wahsner, Jessica; Alzakhem, Nicola; Bischof, Caroline; Stog, Felix; Beeby, Andrew; Seitz, Michael

    2012-08-29

    A series of selectively deuterated praseodymium cryptates has been synthesized. Their luminescence lifetimes in solution range from 150 to 595 ns for the (1)D(2) → (3)F(4) transition. Global fitting of the nonradiative deactivation rate differences of the isotopologic C-(H/D) oscillators revealed that aromatic C-D overtones anomalously quench the luminescence more than C-H vibrations. This is explained by the dominance of Franck-Condon overlap factors that greatly favor C-D oscillators, which are in almost ideal resonance with the relevant energy gap (1)D(2)-(1)G(4) of praseodymium.

  9. Allylic C-H amination for the preparation of syn-1,3-amino alcohol motifs.

    PubMed

    Rice, Grant T; White, M Christina

    2009-08-26

    A highly selective and general Pd/sulfoxide-catalyzed allylic C-H amination reaction en route to syn-1,3-amino alcohol motifs is reported. Key to achieving this reactivity under mild conditions is the use of electron-deficient N-nosyl carbamate nucleophiles that are thought to promote functionalization by furnishing higher concentrations of anionic species in situ. The reaction is shown to be orthogonal to classical C-C bond-forming/-reduction sequences as well as nitrene-based C-H amination methods.

  10. Synthesis of a Benzodiazepine-derived Rhodium NHC Complex by C-H Bond Activation

    SciTech Connect

    Bergman, Roberg G.; Gribble, Jr., Michael W.; Ellman, Jonathan A.

    2008-01-30

    The synthesis and characterization of a Rh(I)-NHC complex generated by C-H activation of 1,4-benzodiazepine heterocycle are reported. This complex constitutes a rare example of a carbene tautomer of a 1,4-benzodiazepine aldimine stabilized by transition metal coordination and demonstrates the ability of the catalytically relevant RhCl(PCy{sub 3}){sub 2} fragment to induce NHC-forming tautomerization of heterocycles possessing a single carbene-stabilizing heteroatom. Implications for the synthesis of benzodiazepines and related pharmacophores via C-H functionalization are discussed.

  11. Development of a Direct Photocatalytic C-H Fluorination for the Preparative Synthesis of Odanacatib.

    PubMed

    Halperin, Shira D; Kwon, Daniel; Holmes, Michael; Regalado, Erik L; Campeau, Louis-Charles; DiRocco, Daniel A; Britton, Robert

    2015-11-01

    Late-stage C-H fluorination is an appealing reaction for medicinal chemistry. However, the application of this strategy to process research appears less attractive due to the formation and necessary purification of mixtures of organofluorines. Here we demonstrate that γ-fluoroleucine methyl ester, an intermediate critical to the large-scale synthesis of odanacatib, can be accessed directly from leucine methyl ester using a combination of the decatungstate photocatalyst and N-fluorobenzenesulfonimide in flow. This efficient C-H fluorination reaction compares favorably with several generations of classical γ-fluoroleucine process syntheses. PMID:26484983

  12. DFT Study of Pd(0)-Promoted Intermolecular C-H Amination with O-Benzoyl Hydroxylamines.

    PubMed

    Zhou, Yunfei; Bao, Xiaoguang

    2016-09-16

    Computational studies were carried out to explore the mechanism of Pd-catalyzed intermolecular C-H amination with O-benzoyl hydroxylamines in which both Pd(0) and Pd(II) catalysts are effective. For the Pd(0)-catalyzed reaction, the generally assumed Pd(0)/Pd(II) catalytic cycle might not be feasible. Instead, Pd(0), being essentially a catalyst precursor, could be oxidized to Pd(II), and the C-H amination proceeds through the Pd(II)/Pd(IV) catalytic cycle. PMID:27573977

  13. Tagging the Untaggable: A Difluoroalkyl-Sulfinate Ketone-Based Reagent for Direct C-H Functionalization of Bioactive Heteroarenes.

    PubMed

    Gnaim, Samer; Scomparin, Anna; Li, Xiuling; Baran, Phil S; Rader, Christoph; Satchi-Fainaro, Ronit; Shabat, Doron

    2016-09-21

    We have developed a new difluoroalkyl ketal sulfinate salt reagent suitable for direct derivatization of heteroarene C-H bonds. The reagent is capable of introducing a ketone functional group on heteroarene bioactive compounds via a one-pot reaction. Remarkably, in three examples the ketone analog and its parent drug had almost identical cytotoxicity. In a representative example, the ketone analog was bioconjugated with a delivery vehicle via an acid-labile semicarbazone linkage and with a photolabile protecting group to produce the corresponding prodrug. Controlled release of the drug-ketone analog was demonstrated in vitro for both systems. This study provides a general approach to obtain taggable ketone analogs directly from bioactive heteroarene compounds with limited options for conjugation. We anticipate that this sodium ketal-sulfinate reagent will be useful for derivatization of other heteroarene-based drugs to obtain ketone-taggable analogs with retained efficacy. PMID:27494153

  14. Collaborative Research: Nanopore Confinement of C-H-O Mixed Volatile Fluids Relevant to Subsurface Energy Systems

    SciTech Connect

    Grady, Brian P.

    2015-03-11

    The scientific objective of this proposal was to obtain a fundamental atomic- to macro-scale understanding of the sorptivity, structure and dynamics of simple and complex hydrocarbon (HC) fluids at mineral surfaces or within nanoporous matrices over temperatures, pressures and compositions encountered in near-surface and shallow crustal environments. The research supported by this award was complementary to that conducted by the group of Prof. David cole at Ohio State University. The scope of the present award was to utilize molecular-level modeling to provide critically important insights into the interfacial properties of mineral-volatile systems, assist in the interpretation of experimental data and predict fluid behavior beyond the limits of current experimental capability. During the past three years the effort has focused primarily on the behavior of C-H volatiles including methane (CH4) and propane (C3H8), mixed-volatile systems including hydrocarbon - CO2 with and without H2O present. The long-range goal is to quantitatively link structure, dynamics and reactivity in complex mineral-/C-H-O systems from the atomic to the molecular to the macroscopic levels. The results are relevant to areas of growing importance such as gas shale, HC-bearing hydrothermal systems, and CO2 storage.

  15. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    DOEpatents

    Ginosar, Daniel M.; Petkovic, Lucia

    2009-09-22

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  16. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    SciTech Connect

    Ginosar, Daniel M.; Petkovic, Lucia M.

    2010-12-28

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  17. The Life of a Legacy Bearer: Biographical Interview with C.H. Patterson.

    ERIC Educational Resources Information Center

    Nassar-McMillan, Sylvia C.

    This manuscript presents a chronological interview recently conducted with Dr. C.H. Patterson, a pioneer in the area of person-centered counseling and counselor education. It details many of the serendipitous events that led him from a child of poverty to a life rich in academic achievements and social rewards. This interview details many of his…

  18. Cobalt-catalyzed C-H olefination of aromatics with unactivated alkenes.

    PubMed

    Manoharan, Ramasamy; Sivakumar, Ganesan; Jeganmohan, Masilamani

    2016-08-18

    A cobalt-catalyzed C-H olefination of aromatic and heteroaromatic amides with unactivated alkenes, allyl acetates and allyl alcohols is described. This method offers an efficient route for the synthesis of vinyl and allyl benzamides in a highly stereoselective manner. It is observed that the ortho substituent on the benzamide moiety is crucial for the observation of allylated products in unactivated alkenes.

  19. Repetitive synthetic method for o,o,p-oligophenylenes using C-H arylation.

    PubMed

    Manabe, Kei; Kimura, Takeshi

    2013-01-18

    A synthetic method for the preparation of o,o,p-oligophenylenes has been developed. It involves Miura's C-H arylation of 2-biphenols with aryl nonaflates as the key step. Oligophenylenes with defined lengths are successfully synthesized using this method. PMID:23289430

  20. Palladium-catalysed transannular C-H functionalization of alicyclic amines

    NASA Astrophysics Data System (ADS)

    Topczewski, Joseph J.; Cabrera, Pablo J.; Saper, Noam I.; Sanford, Melanie S.

    2016-03-01

    Discovering pharmaceutical candidates is a resource-intensive enterprise that frequently requires the parallel synthesis of hundreds or even thousands of molecules. C-H bonds are present in almost all pharmaceutical agents. Consequently, the development of selective, rapid and efficient methods for converting these bonds into new chemical entities has the potential to streamline pharmaceutical development. Saturated nitrogen-containing heterocycles (alicyclic amines) feature prominently in pharmaceuticals, such as treatments for depression (paroxetine, amitifadine), diabetes (gliclazide), leukaemia (alvocidib), schizophrenia (risperidone, belaperidone), malaria (mefloquine) and nicotine addiction (cytisine, varenicline). However, existing methods for the C-H functionalization of saturated nitrogen heterocycles, particularly at sites remote to nitrogen, remain extremely limited. Here we report a transannular approach to selectively manipulate the C-H bonds of alicyclic amines at sites remote to nitrogen. Our reaction uses the boat conformation of the substrates to achieve palladium-catalysed amine-directed conversion of C-H bonds to C-C bonds on various alicyclic amine scaffolds. We demonstrate this approach by synthesizing new derivatives of several bioactive molecules, including varenicline.

  1. Carbonaceous dust in interstellar shock waves: hydrogenated amorphous carbon (a-C:H) vs. graphite

    NASA Astrophysics Data System (ADS)

    Serra Díaz-Cano, L.; Jones, A. P.

    2008-12-01

    Context: Observations of regions of the interstellar medium affected by shock waves indicate gas phase abundances of carbon that are close to solar. In quiescent regions less than half of the carbon is in the gas phase. Aims: We propose that hydrogenated amorphous carbon (a-C:H), in its many guises, is the most probable form of carbonaceous grain material in the interstellar medium and study its erosion in shock waves. Methods: We have used the physical properties typical of a-C:H materials, rather than graphite/amorphous carbon, to study a-C:H erosion during ion irradiation and fragmentation in grain-grain collisions. Using SRIM we study material-, surface- and size-dependent sputtering effects and introduce these effects into a shock model. Results: We find significantly greater destruction for a-C:H, than for graphite, a result that brings the models into better agreement with existing observations of shocked regions of the ISM. Carbon grain erosion in shock waves therefore appears to be much more efficient than predicted by existing models. Conclusions: Interstellar hydrogenated amorphous carbon dust is, apparently, rather easily destroyed in shocks and must therefore be more rapidly re-cycled and re-formed during its journey through the interstellar medium than previously-thought.

  2. Base-mediated intermolecular sp2 C-H bond arylation via benzyne intermediates.

    PubMed

    Truong, Thanh; Daugulis, Olafs

    2011-03-30

    A transition-metal-free method for arylation of heterocycle and arene carbon-hydrogen bonds by aryl chlorides and fluorides has been developed. The reactions proceed via aryne intermediates and are highly regioselective with respect to the C-H bond coupling component.

  3. Ortho C-H Acylation of Aryl Iodides by Palladium/Norbornene Catalysis.

    PubMed

    Dong, Zhe; Wang, Jianchun; Ren, Zhi; Dong, Guangbin

    2015-10-19

    Reported herein is a palladium/norbornene-catalyzed ortho-arene acylation of aryl iodides by a Catellani-type C-H functionalization. This transformation is enabled by isopropyl carbonate anhydrides, which serve as both an acyl cation equivalent and a hydride source.

  4. Nonlinear effects in collision cascades and high energy shock waves during ta-C:H growth

    SciTech Connect

    Piazza, F.; Resto, O.; Morell, G.

    2007-07-01

    The surface topography of hydrogenated tetrahedral amorphous carbon (ta-C:H) is critical for various applications such as microelectromechanical devices, magnetic and optical storage devices, and medical implants. The surface topography of ta-C:H films deposited by distributed electron cyclotron resonance plasma from C{sub 2}H{sub 2} gas precursor was investigated. The effects of pressure, together with ion flux and energy, are studied by atomic force microscopy in relation to the structural evolution of the films. The results are compared with the predictions of the Edward-Wilkinson model [Proc. R. Soc. London, Ser. A 44, 1039 (1966)] recently proposed to account for ta-C:H growth and with previous interpretations based on hypersonic shock waves. The random hillocks observed on the smooth surfaces of ta-C:H films deposited at high pressure are thought to result from the interference of high energy shock waves triggered by C{sub 4}H{sub x}{sup +} ions that produce overlapping collision cascades and induce nonlinear effects.

  5. Palladium-catalysed transannular C-H functionalization of alicyclic amines.

    PubMed

    Topczewski, Joseph J; Cabrera, Pablo J; Saper, Noam I; Sanford, Melanie S

    2016-03-10

    Discovering pharmaceutical candidates is a resource-intensive enterprise that frequently requires the parallel synthesis of hundreds or even thousands of molecules. C-H bonds are present in almost all pharmaceutical agents. Consequently, the development of selective, rapid and efficient methods for converting these bonds into new chemical entities has the potential to streamline pharmaceutical development. Saturated nitrogen-containing heterocycles (alicyclic amines) feature prominently in pharmaceuticals, such as treatments for depression (paroxetine, amitifadine), diabetes (gliclazide), leukaemia (alvocidib), schizophrenia (risperidone, belaperidone), malaria (mefloquine) and nicotine addiction (cytisine, varenicline). However, existing methods for the C-H functionalization of saturated nitrogen heterocycles, particularly at sites remote to nitrogen, remain extremely limited. Here we report a transannular approach to selectively manipulate the C-H bonds of alicyclic amines at sites remote to nitrogen. Our reaction uses the boat conformation of the substrates to achieve palladium-catalysed amine-directed conversion of C-H bonds to C-C bonds on various alicyclic amine scaffolds. We demonstrate this approach by synthesizing new derivatives of several bioactive molecules, including varenicline.

  6. The Importance of Both Similarities and Differences in Multicultural Counseling: Reaction to C. H. Patterson.

    ERIC Educational Resources Information Center

    Pederson, Paul

    1996-01-01

    Reacts to C. H. Patterson's article (this issue) concerning multicultural counseling. Asserts that there are problems with historical concepts of counseling, the definition of culture, and the practice of counseling in multicultural settings. A cultural-centered approach to counseling recognizes that the client has internalized patterns of…

  7. Copper-catalyzed aliphatic C-H amination with an amidine moiety.

    PubMed

    Chen, Hui; Sanjaya, Stephen; Wang, Yi-Feng; Chiba, Shunsuke

    2013-01-01

    A method for amination of aliphatic C-H bonds of N-alkylamidines is described that utilizes Cu(OAc)(2) as the catalyst in the presence of PhI(OAc)(2) and K(3)PO(4). The resulting products, dihydroimidazoles and tetrahydropyrimidines, could be converted into the corresponding diamines by hydride reduction. PMID:23252919

  8. Palladium-Catalyzed C-H Arylation of 1,2,3-Triazoles.

    PubMed

    Zhang, Chengwei; You, Lin; Chen, Chuo

    2016-01-01

    Palladium(II) acetate, in combination with triphenylphosphine, catalyzes direct arylation of 1,4-disubstituted 1,2,3-triazoles effectively. This C-H arylation reaction provides facile access to fully substituted triazoles with well-defined regiochemistry. PMID:27669198

  9. GABA receptor antagonists and insecticides: common structural features of 4-alkyl-1-phenylpyrazoles and 4-alkyl-1-phenyltrioxabicyclooctanes.

    PubMed

    Sammelson, Robert E; Caboni, Pierluigi; Durkin, Kathleen A; Casida, John E

    2004-06-15

    Fipronil [5-amino-3-cyano-1-(2,6-dichloro-4-trifluoromethylphenyl)-4-trifluoromethylsulfinylpyrazole] is one of the most important insecticides. Structure-activity studies described here reveal that fipronil retains its very high binding potency at the human beta3 and house fly gamma-aminobutyric acid (GABA) receptors and toxicity to house flies on replacing the pyrazole trifluoromethylsulfinyl moiety with tert-butyl or isopropyl and the phenyl trifluoromethyl substituent with ethynyl, trifluoromethoxy, bromo or chloro. Among the compounds studied, those with other alkyl groups at the 4-position of the pyrazole, as well as phenyl substitution without one or both of the 2,6-dichloro groups, are less effective. 5-Amino-4-tert-butyl-3-cyano-1-(2,6-dichloro-4-ethynylphenyl)pyrazole is highly effective and almost isosteric with 4-tert-butyl-3-cyano-1-(4-ethynylphenyl)-2,6,7-trioxabicyclo[2.2.2]octane (the most potent 4-alkyl-1-phenyltrioxabicyclooctane) as a noncompetitive GABA antagonist and insecticide. These findings are interpreted as three binding subsites in the GABA receptor: a hydrophobic site undergoing steric interaction with the tert-butyl or equivalent group; a hydrogen bonding site to pyrazole N-2; a pi bonding site to the face of the phenyl moiety; with supplemental enhancement by the 3-cyano and 4-ethynyl substituents.

  10. C+/H2 gas in star-forming clouds and galaxies

    NASA Astrophysics Data System (ADS)

    Nordon, Raanan; Sternberg, Amiel

    2016-11-01

    We present analytic theory for the total column density of singly ionized carbon (C+) in the optically thick photon dominated regions (PDRs) of far-UV irradiated (star-forming) molecular clouds. We derive a simple formula for the C+ column as a function of the cloud (hydrogen) density, the far-UV field intensity, and metallicity, encompassing the wide range of galaxy conditions. When assuming the typical relation between UV and density in the cold neutral medium, the C+ column becomes a function of the metallicity alone. We verify our analysis with detailed numerical PDR models. For optically thick gas, most of the C+ column is mixed with hydrogen that is primarily molecular (H2), and this `C+/H2' gas layer accounts for almost all of the `CO-dark' molecular gas in PDRs. The C+/H2 column density is limited by dust shielding and is inversely proportional to the metallicity down to ˜0.1 solar. At lower metallicities, H2 line blocking dominates and the C+/H2 column saturates. Applying our theory to CO surveys in low-redshift spirals, we estimate the fraction of C+/H2 gas out of the total molecular gas to be typically ˜0.4. At redshifts 1 < z < 3 in massive disc galaxies the C+/H2 gas represents a very small fraction of the total molecular gas (≲ 0.16). This small fraction at high redshifts is due to the high gas surface densities when compared to local galaxies.

  11. Synthesis of alkyl-terminated silicon nanoclusters by a solution route

    SciTech Connect

    Yang, C.S.; Bley, R.A.; Kauzlarich, S.M.; Lee, H.W.H.; Delgado, G.R.

    1999-06-09

    The authors describe the synthesis and characterization of alkyl-capped nanocrystalline Si({cflx R}-n-Si) prepared by the reaction of SiCl{sub 4} with Mg{sub 2}Si in ethylene glycol dimethyl ether (glyme) and surface-terminated with various alkyl groups. {cflx R}-n-Si (R = methyl, ethyl, n-butyl, and n-octyl). This reaction produces crystalline nanoparticles with surfaces that can be chemically modified. The resultant crystalline nanoparticles can be suspended in organic solvents or isolated as a powder. The nanoclusters were characterized by transmission electron microscopy (TEM), high-resolution TEM, selected area electron diffraction (SAED), and Fourier transform infrared (FTIR) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, UV-vis absorption, and photoluminescence spectroscopy. The average cluster size depends on the reflux time of Mg{sub 2}Si with SiCl{sub 4}, which provided nanoclusters with an average size of 2--5 nm. HRTEM confirms the presence of crystalline nanoclusters, and SAED is consistent with diamond-structured silicon. FTIR spectra are consistent with alkyl surface termination and show very little or no evidence for oxygen on the surface of the nanoclusters, depending on the surface alkyl group. The alkyl termination can be removed by reaction in air at 450 C, and a Si-O stretch is observed in the FTIR spectra. EPR spectroscopy is consistent with crystalline Si nanoclusters and shows no signal at 4 K. The optical absorption spectra show an absorption edge between 260 and 240 nm, depending on the surface alkyl group, while a strong UV-blue photoluminescence between 315 and 520 nm is observed.

  12. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  13. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  14. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  15. 40 CFR 721.8700 - Halogenated alkyl pyridine.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Halogenated alkyl pyridine. 721.8700... Substances § 721.8700 Halogenated alkyl pyridine. Link to an amendment published at 79 FR 34638, June 18... identified generically as halogenated alkyl pyridine (PMN P-83-237) is subject to reporting under...

  16. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Disubstituted alkyl triazines (generic... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). Link to an amendment... reporting. (1) The chemical substances identified generically as disubstituted alkyl triazines (PMNs...

  17. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  18. 40 CFR 721.10233 - Linear alkyl epoxide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Linear alkyl epoxide (generic). 721... Substances § 721.10233 Linear alkyl epoxide (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as linear alkyl epoxide (PMN...

  19. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs...

  20. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl substituted diaromatic... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  1. 40 CFR 721.550 - Alkyl alkenoate, azobis-.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl alkenoate, azobis-. 721.550... Substances § 721.550 Alkyl alkenoate, azobis-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl alkenoate, azobis- (PMN P-88-2470)...

  2. 40 CFR 721.550 - Alkyl alkenoate, azobis-.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl alkenoate, azobis-. 721.550... Substances § 721.550 Alkyl alkenoate, azobis-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl alkenoate, azobis- (PMN P-88-2470)...

  3. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  4. 40 CFR 721.648 - Alkyl dialkylamino phenylsulfonyl alkenoate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl dialkylamino phenylsulfonyl... Specific Chemical Substances § 721.648 Alkyl dialkylamino phenylsulfonyl alkenoate (generic). (a) Chemical... as alkyl dialkylamino phenylsulfonyl alkenoate (PMN P-00-0816) is subject to reporting under...

  5. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  6. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Di-alkyl borane (generic). 721.1852... Substances § 721.1852 Di-alkyl borane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as di-alkyl borane (PMN P-00-1087) is...

  7. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  8. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  9. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  10. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl substituted diaromatic... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  11. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phosphonate...

  12. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs...

  13. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  14. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Disubstituted alkyl triazines (generic... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). (a) Chemical... as disubstituted alkyl triazines (PMNs P-85-932 and P-85-933) are subject to reporting under...

  15. 40 CFR 721.6490 - Alkyl phenyl polyetheramines.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phenyl polyetheramines. 721.6490... Substances § 721.6490 Alkyl phenyl polyetheramines. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phenyl...

  16. 40 CFR 721.10669 - Tertiary amine alkyl ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tertiary amine alkyl ether (generic... Specific Chemical Substances § 721.10669 Tertiary amine alkyl ether (generic). (a) Chemical substance and... alkyl ether (PMN P-13-78) is subject to reporting under this section for the significant new...

  17. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Ethoxylated alkyl quaternary ammonium... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  18. 40 CFR 721.10385 - Phenoxy alkyl ether (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Phenoxy alkyl ether (generic). 721... Substances § 721.10385 Phenoxy alkyl ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as phenoxy alkyl ether (PMN...

  19. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl substituted diaromatic... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  20. 40 CFR 721.575 - Substituted alkyl halide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Substituted alkyl halide. 721.575... Substances § 721.575 Substituted alkyl halide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as substituted alkyl halide (PMN P-83-1222)...

  1. 40 CFR 721.10385 - Phenoxy alkyl ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Phenoxy alkyl ether (generic). 721... Substances § 721.10385 Phenoxy alkyl ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as phenoxy alkyl ether (PMN...

  2. 40 CFR 721.647 - Alkoxylated alkyl amine (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkoxylated alkyl amine (generic). 721... Substances § 721.647 Alkoxylated alkyl amine (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkoxylated alkyl amine...

  3. 40 CFR 721.10697 - Polyfluorinated alkyl polyamide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl polyamide... Specific Chemical Substances § 721.10697 Polyfluorinated alkyl polyamide (generic). (a) Chemical substance... polyfluorinated alkyl polyamide (PMN P-11-487) is subject to reporting under this section for the significant...

  4. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  5. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phosphonate...

  6. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  7. 40 CFR 721.3740 - Bisalkylated fatty alkyl amine oxide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Bisalkylated fatty alkyl amine oxide... Substances § 721.3740 Bisalkylated fatty alkyl amine oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisalkylated fatty alkyl...

  8. 40 CFR 721.647 - Alkoxylated alkyl amine (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkoxylated alkyl amine (generic). 721... Substances § 721.647 Alkoxylated alkyl amine (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkoxylated alkyl amine...

  9. 40 CFR 721.8700 - Halogenated alkyl pyridine.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Halogenated alkyl pyridine. 721.8700... Substances § 721.8700 Halogenated alkyl pyridine. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as halogenated alkyl pyridine (PMN P-83-237)...

  10. 40 CFR 721.10701 - Polyfluorinated alkyl amine (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl amine (generic... Specific Chemical Substances § 721.10701 Polyfluorinated alkyl amine (generic). (a) Chemical substance and... polyfluorinated alkyl amine (PMN P-11-532) is subject to reporting under this section for the significant new...

  11. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl substituted diaromatic... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  12. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  13. 40 CFR 721.10385 - Phenoxy alkyl ether (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Phenoxy alkyl ether (generic). 721... Substances § 721.10385 Phenoxy alkyl ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as phenoxy alkyl ether (PMN...

  14. 40 CFR 721.648 - Alkyl dialkylamino phenylsulfonyl alkenoate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl dialkylamino phenylsulfonyl... Specific Chemical Substances § 721.648 Alkyl dialkylamino phenylsulfonyl alkenoate (generic). (a) Chemical... as alkyl dialkylamino phenylsulfonyl alkenoate (PMN P-00-0816) is subject to reporting under...

  15. 40 CFR 721.10233 - Linear alkyl epoxide (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Linear alkyl epoxide (generic). 721... Substances § 721.10233 Linear alkyl epoxide (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as linear alkyl epoxide (PMN...

  16. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  17. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  18. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  19. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  20. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Ethoxylated alkyl quaternary ammonium... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  1. 40 CFR 721.550 - Alkyl alkenoate, azobis-.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl alkenoate, azobis-. 721.550... Substances § 721.550 Alkyl alkenoate, azobis-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl alkenoate, azobis- (PMN P-88-2470)...

  2. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  3. 40 CFR 721.648 - Alkyl dialkylamino phenylsulfonyl alkenoate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl dialkylamino phenylsulfonyl... Specific Chemical Substances § 721.648 Alkyl dialkylamino phenylsulfonyl alkenoate (generic). (a) Chemical... as alkyl dialkylamino phenylsulfonyl alkenoate (PMN P-00-0816) is subject to reporting under...

  4. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  5. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phosphonate...

  6. 40 CFR 721.10453 - Polyglycerin alkyl ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Polyglycerin alkyl ether (generic... Specific Chemical Substances § 721.10453 Polyglycerin alkyl ether (generic). (a) Chemical substance and... alkyl ether (PMN P-02-796) is subject to reporting under this section for the significant new...

  7. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Di-alkyl borane (generic). 721.1852... Substances § 721.1852 Di-alkyl borane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as di-alkyl borane (PMN P-00-1087) is...

  8. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  9. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  10. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phosphonate...

  11. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Disubstituted alkyl triazines (generic... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). (a) Chemical... as disubstituted alkyl triazines (PMNs P-85-932 and P-85-933) are subject to reporting under...

  12. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Di-alkyl borane (generic). 721.1852... Substances § 721.1852 Di-alkyl borane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as di-alkyl borane (PMN P-00-1087) is...

  13. 40 CFR 721.10696 - Polyfluorinated alkyl thiol (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl thiol (generic... Specific Chemical Substances § 721.10696 Polyfluorinated alkyl thiol (generic). (a) Chemical substances and... polyfluorinated alkyl thiol (PMNs P-11-483 and P-11-528) are subject to reporting under this section for...

  14. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  15. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  16. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Di-alkyl borane (generic). 721.1852... Substances § 721.1852 Di-alkyl borane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as di-alkyl borane (PMN P-00-1087) is...

  17. 40 CFR 721.575 - Substituted alkyl halide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Substituted alkyl halide. 721.575... Substances § 721.575 Substituted alkyl halide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as substituted alkyl halide (PMN P-83-1222)...

  18. 40 CFR 721.648 - Alkyl dialkylamino phenylsulfonyl alkenoate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl dialkylamino phenylsulfonyl... Specific Chemical Substances § 721.648 Alkyl dialkylamino phenylsulfonyl alkenoate (generic). (a) Chemical... as alkyl dialkylamino phenylsulfonyl alkenoate (PMN P-00-0816) is subject to reporting under...

  19. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  20. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  1. 40 CFR 721.10700 - Polyfluorinated alkyl thio polyacrylamide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl thio... Specific Chemical Substances § 721.10700 Polyfluorinated alkyl thio polyacrylamide (generic). (a) Chemical... as polyfluorinated alkyl thio polyacrylamide (PMNs P-11-530 and P-11-533) are subject to...

  2. 40 CFR 721.575 - Substituted alkyl halide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Substituted alkyl halide. 721.575... Substances § 721.575 Substituted alkyl halide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as substituted alkyl halide (PMN P-83-1222)...

  3. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  4. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  5. 40 CFR 721.550 - Alkyl alkenoate, azobis-.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl alkenoate, azobis-. 721.550... Substances § 721.550 Alkyl alkenoate, azobis-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl alkenoate, azobis- (PMN P-88-2470)...

  6. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  7. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  8. 40 CFR 721.10453 - Polyglycerin alkyl ether (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyglycerin alkyl ether (generic... Specific Chemical Substances § 721.10453 Polyglycerin alkyl ether (generic). (a) Chemical substance and... alkyl ether (PMN P-02-796) is subject to reporting under this section for the significant new...

  9. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  10. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  11. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  12. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  13. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  14. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Disubstituted alkyl triazines (generic... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). (a) Chemical... as disubstituted alkyl triazines (PMNs P-85-932 and P-85-933) are subject to reporting under...

  15. 40 CFR 721.3740 - Bisalkylated fatty alkyl amine oxide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Bisalkylated fatty alkyl amine oxide... Substances § 721.3740 Bisalkylated fatty alkyl amine oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisalkylated fatty alkyl...

  16. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs...

  17. 40 CFR 721.10233 - Linear alkyl epoxide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Linear alkyl epoxide (generic). 721... Substances § 721.10233 Linear alkyl epoxide (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as linear alkyl epoxide (PMN...

  18. 40 CFR 721.10692 - Fluorinated alkyl dianiline (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Fluorinated alkyl dianiline (generic... Specific Chemical Substances § 721.10692 Fluorinated alkyl dianiline (generic). (a) Chemical substance and... alkyl dianiline (PMN P-13-288) is subject to reporting under this section for the significant new...

  19. 40 CFR 721.3740 - Bisalkylated fatty alkyl amine oxide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Bisalkylated fatty alkyl amine oxide... Substances § 721.3740 Bisalkylated fatty alkyl amine oxide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisalkylated fatty alkyl...

  20. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs...

  1. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  2. 40 CFR 721.6490 - Alkyl phenyl polyetheramines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl phenyl polyetheramines. 721.6490... Substances § 721.6490 Alkyl phenyl polyetheramines. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phenyl...

  3. 40 CFR 721.6490 - Alkyl phenyl polyetheramines.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl phenyl polyetheramines. 721.6490... Substances § 721.6490 Alkyl phenyl polyetheramines. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phenyl...

  4. 40 CFR 721.648 - Alkyl dialkylamino phenylsulfonyl alkenoate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl dialkylamino phenylsulfonyl... Specific Chemical Substances § 721.648 Alkyl dialkylamino phenylsulfonyl alkenoate (generic). (a) Chemical... as alkyl dialkylamino phenylsulfonyl alkenoate (PMN P-00-0816) is subject to reporting under...

  5. 40 CFR 721.10699 - Polyfluorinated alkyl thio acrylamide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl thio acrylamide... Specific Chemical Substances § 721.10699 Polyfluorinated alkyl thio acrylamide (generic). (a) Chemical... as polyfluorinated alkyl thio acrylamide (PMN P-11-529) is subject to reporting under this...

  6. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Di-alkyl borane (generic). 721.1852... Substances § 721.1852 Di-alkyl borane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as di-alkyl borane (PMN P-00-1087) is...

  7. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  8. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ethoxylated alkyl quaternary ammonium... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  9. 40 CFR 721.10698 - Polyfluorinated alkyl halide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl halide (generic... Specific Chemical Substances § 721.10698 Polyfluorinated alkyl halide (generic). (a) Chemical substance and... polyfluorinated alkyl halide (PMN P-11-527) is subject to reporting under this section for the significant...

  10. 40 CFR 721.550 - Alkyl alkenoate, azobis-.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl alkenoate, azobis-. 721.550... Substances § 721.550 Alkyl alkenoate, azobis-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl alkenoate, azobis- (PMN P-88-2470)...

  11. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  12. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  13. 40 CFR 721.6490 - Alkyl phenyl polyetheramines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl phenyl polyetheramines. 721.6490... Substances § 721.6490 Alkyl phenyl polyetheramines. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl phenyl...

  14. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ethoxylated alkyl quaternary ammonium... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  15. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  16. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs...

  17. 40 CFR 721.647 - Alkoxylated alkyl amine (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkoxylated alkyl amine (generic). 721... Substances § 721.647 Alkoxylated alkyl amine (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkoxylated alkyl amine...

  18. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  19. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl substituted diaromatic... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  20. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Disubstituted alkyl triazines (generic... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). (a) Chemical... as disubstituted alkyl triazines (PMNs P-85-932 and P-85-933) are subject to reporting under...