Science.gov

Sample records for alkyl chains attached

  1. Partial Crystallinity in Alkyl Side Chain Polymers.

    NASA Astrophysics Data System (ADS)

    Sahni, Vasav; Prasad, Shishir; Villate, Johanna; Jiang, Zhang; Sinha, Sunil; Dhinojwala, Ali

    2009-03-01

    Surface freezing is the formation of a crystalline monolayer at the free surface of a melt at a temperature Ts, a few degrees above the bulk freezing temperature, Tb. This effect, i.e. Ts> Tb, common to many chain molecules, is in marked contrast with the surface melting effect, i.e. Ts<=Tb, shown by almost all other materials. Various theoretical and experimental studies have been done to characterize the monolayer formed when the surface freezes before the bulk. We have studied the structure of a novel crystalline surface monolayer on top of a disordered melt of the same material (poly(n-alkyl acrylate)s) using grazing incidence x-ray diffraction. The grazing incidence x-ray diffraction, surface tension, and bulk latent heat results show that there is partial side-chain crystallinity. Also, the surface tension results explain the trend of the difference between the surface order-to-disorder transition temperature and the bulk melting temperature (δT) as a function of side chain length. The behavior of the crystal length, crystal spacing and tilt with varying alkyl chain length and temperature was also studied.

  2. Alkyl chains acting as entropy reservoir in liquid crystalline materials.

    PubMed

    Sorai, Michio; Saito, Kazuya

    2003-01-01

    The roles played by the conformational disordering of alkyl chains in determining the aggregation states of matter are reviewed for liquid crystalline materials from a thermodynamic perspective. Entropy, which is one of the most macroscopic concepts but which has a clear microscopic meaning, provides crucial microscopic information for complex systems for which a microscopic description is hard to establish. Starting from structural implication by absolute (third-law) entropy for crystalline solids, the existence of successive phase transitions caused by the successive conformational melting of alkyl chains in discotic mesogens is explained. An experimental basis is given for the "quasi-binary picture" of thermotropic liquid crystals, i.e., the highly disordered alkyl chains behave like a second component (solvent). A novel entropy transfer between the "components" of a molecule and the resulting "alkyl chains as entropy reservoir" mechanism are explained for cubic mesogens.

  3. Effects of alkyl chain length on properties of 1-alkyl-3-methylimidazolium fluorohydrogenate ionic liquid crystals.

    PubMed

    Xu, Fei; Matsumoto, Kazuhiko; Hagiwara, Rika

    2010-11-15

    A series of 1-alkyl-3-methylimidazolium fluorohydrogenate salts (C(x)MIm(FH)(2)F, x=8, 10, 12, 14, 16, and 18) have been characterized by thermal analysis, polarized optical microscopy, IR spectroscopy, X-ray diffraction, and anisotropic ionic conductivity measurements. Liquid crystalline mesophases with a smectic A interdigitated bilayer structure are observed from C(10) to C(18), showing a fan-like or focal conic texture. The temperature range of the mesophase increases with the increase in the alkyl chain length (from 10.1 °C for C(10)MIm(FH)(2)F to 123.1 °C for C(18)MIm(FH)(2)F). The distance between the two layers in the smectic structure gradually increases with increasing alkyl chain length and decreases with increasing temperature. Conductivity parallel to the smectic layers is around 10 mS cm(-1) regardless of the alkyl chain length, whereas that perpendicular to the smectic layers decreases with increasing alkyl chain length because of the thicker insulating sheet with the longer alkyl chain.

  4. Effect of alkyl chain length on the rotational diffusion of nonpolar and ionic solutes in 1-alkyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imides.

    PubMed

    Gangamallaiah, V; Dutt, G B

    2013-10-10

    Rotational diffusion of a nonpolar solute 9-phenylanthracene (9-PA) and a cationic solute rhodamine 110 (R110) has been examined in a series of 1-alkyl-3-methylimidazolium (alkyl = octyl, decyl, dodecyl, tetradecyl, hexadecyl, and octadecyl) bis(trifluoromethylsulfonyl)imides to understand the influence of alkyl chain length on solute rotation. In this study, reorientation times (τr) have been measured as a function of viscosity (η) by varying the temperature (T) of the solvents. These results have been analyzed using the Stokes-Einstein-Debye (SED) hydrodynamic theory along with the ones obtained for the same solutes in 1-alkyl-3-methylimidazolium (alkyl = methyl, ethyl, propyl, butyl, and hexyl) bis(trifluoromethylsulfonyl)imides (Gangamallaiah and Dutt, J. Phys. Chem. B 2012, 116, 12819-12825). It has been noticed that the data for 9-PA and R110 follows the relation τr = A(η/T)(n) with A being the ratio of hydrodynamic volume of the solute to the Boltzmann constant and n = 1 as envisaged by the SED theory. However, upon increasing the alkyl chain length from methyl to octadecyl significant deviations from the SED theory have been observed especially from the octyl derivative onward. From methyl to octadecyl derivatives, the value of A decreases by a factor of 3 for both the solutes and n by a factor of 1.4 and 1.6 for 9-PA and R110, respectively. These observations have been rationalized by taking into consideration the organized structure of the ionic liquids, whose influence appears to be pronounced when the number of carbon atoms in the alkyl chain attached to the imidazolium cation exceeds eight.

  5. Tunneling conductance of amine-linked alkyl chains.

    PubMed

    Prodan, Emil; Car, Roberto

    2008-06-01

    The tunneling transport theory developed in ref 9 (Phys. Rev. B 2007, 76, 115102) is applied to molecular devices made of alkyl chains linked to gold electrodes via amine groups. Using the analytic expression of the tunneling conductance derived in our previous work, we identify the key physical quantities that characterize the conductance of these devices. By investigating the transport characteristics of three devices, containing four, six, and eight methyl groups, we extract the dependence of the tunneling conductance on the chain's length, which is an exponential decay law in agreement with recent experimental data.

  6. Hyaluronan derivatives: Alkyl chain length boosts viscoelastic behavior to depolymerization.

    PubMed

    Pavan, Mauro; Galesso, Devis; Menon, Giampaolo; Renier, Davide; Guarise, Cristian

    2013-09-12

    Five amide derivatives of Hyaluronic Acid (HA) were synthesized with C8, C12, C15, C16 and C18 linear alkyl-amines. These polymers (Hyadd) were tested against thermal, oxidative and hyaluronidase degradation by means of rheological experiments and SEC analysis and compared to non-modified HA. First of all, no free hexadecylamine was detected in the treated samples, meaning that under these stressing conditions only cleavage of glycosidic bonds occurs. Then, viscoelastic properties were assessed during thermal degradation and their variation as a function of time was expressed by means of a decay constant k(G'): while no significant difference in the decrease rate was observed between Hyadd-C8 and Hyadd-C12, a marked stabilization of viscoelastic properties during thermal treatment was detected for Hyadd-C15, Hyadd-C16 and Hyadd-C18. On the other hand, no difference was observed between the MW decrease rate (kMW decay constant) of HA and Hyadd-C12 to-C18; the depolymerization takes place on the backbone of the polymers independently whether they are derivatized or not, but longer alkyl chains lead to higher viscoelasticity in the depolymerized products. Finally, both oxidative and enzymatic degradation were carried out analyzing the changes in elastic modulus and in dynamic viscosity: once again, the amide side chain came out with similar behavior to chemical cross-linked HA (HBC) and with improved performances respect to linear HA in terms of preservation of viscoelasticity after chain depolymerization.

  7. Alkyl chain length dependence of the field-effect mobility in novel anthracene derivatives.

    PubMed

    Back, Jang Yeol; An, Tae Kyu; Cheon, Ye Rim; Cha, Hyojung; Jang, Jaeyoung; Kim, Yebyeol; Baek, Yonghwa; Chung, Dae Sung; Kwon, Soon-Ki; Park, Chan Eon; Kim, Yun-Hi

    2015-01-14

    We report six asymmetric alkylated anthracene-based molecules with different alkyl side chain lengths for use in organic field-effect transistors (OFETs). Alkyl side chains can potentially improve the solubility and processability of anthracene derivatives. The crystallinity and charge mobility of the anthracene derivatives may be improved by optimizing the side chain length. The highest field-effect mobility of the devices prepared here was 0.55 cm(2)/(V s), for 2-(p-pentylphenylethynyl)anthracene (PPEA). The moderate side chain length appeared to be optimal for promoting self-organization among asymmetric anthracene derivatives in OFETs, and was certainly better than the short or long alkyl side chain lengths, as confirmed by X-ray diffraction measurements.

  8. Vibrational Spectroscopic Study of Imidazolium Dicationic Ionic Liquids: Effect of Cation Alkyl Chain Length

    NASA Astrophysics Data System (ADS)

    Moumene, T.; Belarbi, E. H.; Haddad, B.; Villemin, D.; Abbas, O.; Khelifa, B.; Bresson, S.

    2016-05-01

    Two new dicationic ionic liquids were synthesized: bis-methyl imidazolium methylidene hexafluorophosphate [M(CH2)IM2 +][2PF 6 - ] and bis-methyl imidazolium propylidene hexafluorophosphate [M(CH2)3IM2 +][2PF 6 - ]. Their structures were identified by H, C, P, F NMR, FTIR/ATR, and FT-Raman spectroscopies in order to study the effect of cation alkyl chain length on vibration behaviors. Several changes were recorded, which were related to alkyl chain length. A frequency shift was observed in some modes while others remained insensitive. A greater number of peaks was found in the FTIR/ATR spectra and the FT-Raman spectra with increasing alkyl chain length, which indicated that chain length influences the N-C connection twisting. More peaks with strong intensity appeared for longer alkyl chain lengths.

  9. Effects of straight alkyl chain, extra hydroxylated alkyl chain and branched chain amino acids on gastric emptying evaluated using a non-invasive breath test in conscious rats

    PubMed Central

    Uchida, Masayuki; Kobayashi, Orie; Iwasawa, Kaori; Shimizu, Kimiko

    2016-01-01

    Aim: Some amino acids been known to influence gastric emptying. Thus we have evaluated the effects of straight alkyl chain, extra hydroxylated alkyl chain and branched chain amino acids on gastric emptying. Materials and Methods: Gastric emptying was evaluated in rats after feeding with Racol (nutrient formulae) containing [1-13C] acetic acid. Using a breath test, the content of 13CO2 in their expired air was measured by infrared analyzers. Rats were orally administered with test amino acids, while control rats were administered orally with distilled water. Results: The expired 13CO2 content in the expired air increased with time, peaked after about 30 min and decreased thereafter. Among the amino acids having an alkyl chain, l-serine, l-alanine and l-glycine, significantly decreased the 13CO2 content and Cmax, and delayed Tmax, suggesting inhibition and delay of gastric emptying. AUC120 min values of l-alanine and l-glycine also decreased significantly. l-Threonine significantly decreased 13CO2 content and delayed Tmax, but had no influence on Cmax and AUC120 min values, suggesting a delay of gastric emptying. l-Isoleucine and l-leucine and l-valine significantly decreased 13CO2 content, suggesting inhibition of the gastric emptying, but Cmax, Tmax and AUC120 min values were not significantly affected. Conclusion: The results show that the amino acids used in the present study had different effects on gastric emptying. Moreover, it was found that inhibition and delay of gastric emptying were clearly classifiable by analyzing the change in 13CO2 content of the expired air and the Cmax, Tmax and AUC120 min values. PMID:27169776

  10. Photoionization of alkylphenothiazines in vesicles: Effects of the alkyl chain length and the vesicle surface charge

    SciTech Connect

    Sakaguchi, Masato; Hu, Ming; Kevan, L. )

    1990-01-25

    The photoionization of alkylphenothiazine (AP = alkylphenothiazine) in vesicles were observed by electron spin resonance (ESR) and electron spin echo modulation (ESEM) methods. Alkylphenothiazine derivatives including sodium 10-methylphenothiazinesulfonate (C{sub 1}PSO{sub 3}Na), sodium 10-dodecylphenothiazinesulfonate (C{sub 12}PSO{sub 3}Na), sodium 3-(10{prime}-phenothiazinyl)propane-1-sulfonate (PC{sub 3}SO{sub 3}Na), sodium 6-(10{prime}-phenothiazinyl)hexane-1-sulfonate (PC{sub 6}SO{sub 3}Na), and sodium 12-(10{prime}-phenothiazinyl)dodecane-1-sulfonate (PC{sub 12}SO{sub 3} Na) were synthesized and used to study the effects of the alkyl chain length, the position of the sulfonate group, and the vesicle surface charge on the photoionization. A single ESR spectrum due to the alkylphenothiazine cation radicals (AP{sup +}) was observed from rapidly frozen AP in dioctadecyldimethylammonium chloride (DODAC) or dihexadecyl phosphate (DHP) vesicles photoirradiated for 10 min with {lambda} > 300 nm. In DODAC vesicles with a positive surface charge, the photoionization yield of PC{sub 12}SO{sub 3}Na with a sulfonate group at the dodecyl chain end is higher than that of C{sub 12}PSO{sub 3}Na with a sulfonate group on the phenothiazine ring. The photoionization yields of AP having the sulfonate group at the alkyl chain end in DODAC vesicles increase with decreasing alkyl chain length. The highest photoionization yield was obtained from PC{sub 3}SO{sub 3}Na, which has the shortest alkyl chain in this study and has the sulfonate group at the end of the propyl chain. The photoionization yield of AP in DHP vesicles with a negative surface charge was not changed by added alkyl chains or the position of the sulfonate group in AP. The results are discussed in terms of the alkyl chain length, the position of the sulfonate group, and the vesicle surface charge.

  11. Dependence of micelle size and shape on detergent alkyl chain length and head group.

    PubMed

    Oliver, Ryan C; Lipfert, Jan; Fox, Daniel A; Lo, Ryan H; Doniach, Sebastian; Columbus, Linda

    2013-01-01

    Micelle-forming detergents provide an amphipathic environment that can mimic lipid bilayers and are important tools for solubilizing membrane proteins for functional and structural investigations in vitro. However, the formation of a soluble protein-detergent complex (PDC) currently relies on empirical screening of detergents, and a stable and functional PDC is often not obtained. To provide a foundation for systematic comparisons between the properties of the detergent micelle and the resulting PDC, a comprehensive set of detergents commonly used for membrane protein studies are systematically investigated. Using small-angle X-ray scattering (SAXS), micelle shapes and sizes are determined for phosphocholines with 10, 12, and 14 alkyl carbons, glucosides with 8, 9, and 10 alkyl carbons, maltosides with 8, 10, and 12 alkyl carbons, and lysophosphatidyl glycerols with 14 and 16 alkyl carbons. The SAXS profiles are well described by two-component ellipsoid models, with an electron rich outer shell corresponding to the detergent head groups and a less electron dense hydrophobic core composed of the alkyl chains. The minor axis of the elliptical micelle core from these models is constrained by the length of the alkyl chain, and increases by 1.2-1.5 Å per carbon addition to the alkyl chain. The major elliptical axis also increases with chain length; however, the ellipticity remains approximately constant for each detergent series. In addition, the aggregation number of these detergents increases by ∼16 monomers per micelle for each alkyl carbon added. The data provide a comprehensive view of the determinants of micelle shape and size and provide a baseline for correlating micelle properties with protein-detergent interactions.

  12. Certain Chemical Substances Containing Varying Carbon Chain Lengths (Alkyl Ranges Using the Cx-y Notation) on the TSCA Inventory

    EPA Pesticide Factsheets

    This paper explains the conventions that are applied to certain listings of chemical substances containing ranges of alkyl chain lengths (i.e., carbon chains of varying lengths) for chemical substances on the Toxic Substances Control Act (TSCA)

  13. Interplay between alkyl chain asymmetry and cholesterol addition in the rigid ion pair amphiphile bilayer systems

    NASA Astrophysics Data System (ADS)

    Huang, Fong-yin; Chiu, Chi-cheng

    2017-01-01

    Ion pair amphiphile (IPA), a molecular complex composed of a pair of cationic and anionic surfactants, has been proposed as a novel phospholipid substitute. Controlling the physical stability of IPA vesicles is important for its application developments such as cosmetic and drug deliveries. To investigate the effects of IPA alkyl chain combinations and the cholesterol additive on the structural and mechanical properties of IPA vesicular bilayers, we conducted a series of molecular dynamics studies on the hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS) and dodecyltrimethylammonium-hexadecylsulfate (DTMA-HS) IPA bilayers with cholesterol. We found that both IPA bilayers are in the gel phase at 298 K, consistent with experimental observations. Compared with the HTMA-DS system, the DTMA-HS bilayer has more disordered alkyl chains in the hydrophobic region. When adding cholesterol, it induces alkyl chain ordering around its rigid sterol ring. Yet, cholesterol increases the molecular areas for all species and disturbs the molecular packing near the hydrophilic region and the bilayer core. Cholesterol also promotes the alkyl chain mismatch between the IPA moieties, especially for the DTMA-HS bilayer. The combined effects lead to non-monotonically enhancement of the membrane mechanical moduli for both IPA-cholesterol systems. Furthermore, cholesterol can form H-bonds with the alkylsulfate and thus enhance the contribution of alkylsulfate to the overall mechanical moduli. Combined results provide valuable molecular insights into the roles of each IPA component and the cholesterol on modulating the IPA bilayer properties.

  14. Conformation-specific spectroscopy of alkyl benzyl radicals: Effects of a radical center on the CH stretch infrared spectrum of an alkyl chain

    NASA Astrophysics Data System (ADS)

    Korn, Joseph A.; Tabor, Daniel P.; Sibert, Edwin L.; Zwier, Timothy S.

    2016-09-01

    An important initial step in the combustion of gasoline and diesel fuels is the abstraction of hydrogen from alkylbenzenes to form resonance-stabilized alkyl benzyl radicals. This work uses, for the first time, double resonance spectroscopy methods to explore the conformation-specific vibronic and infrared spectroscopy of the α-ethylbenzyl (αEtBz) and α-propylbenzyl (αPrBz) radicals. Local mode Hamiltonian modeling enables assignment of the alkyl CH stretch IR spectra, accounting for Fermi resonance that complicates aliphatic alkyl CH stretch IR spectroscopy. The ground state conformational preferences of the ethyl and propyl chains are changed from those in the alkylbenzenes themselves, with global minima occurring for an in-plane orientation of the alkyl chain (trans) about its first dihedral angle (ϕf123, numbers are alkyl C atoms. C1 is CH radical site). This in-plane structure is the only observed conformer for the α-EtBz radical, while two conformers, tt and tg' share this orientation at the first dihedral, but differ in the second (ϕ1234) for the αPrBz radical. The in-plane orientation lowers the local site frequencies of the CH2 group stretches immediately adjacent to the benzylic radical site by about 50 cm-1 relative to those in pure alkyl chains or alkylbenzenes. This effect of the radical site is localized on the first CH2 group, with little effect on subsequent members of the alkyl chain. In the D1 excited electronic state, an out-of-plane orientation is preferred for the alkyl chains, leading to torsional mode Franck-Condon activity in the D0-D1 spectra that is both conformer-specific and diagnostic of the conformational change.

  15. The effect of the cation alkyl chain branching on mutual solubilities with water and toxicities

    PubMed Central

    Kurnia, Kiki A.; Sintra, Tânia E.; Neves, Catarina M. S. S.; Shimizu, Karina; Lopes, José N. Canongia; Gonçalves, Fernando; Ventura, Sónia P. M.; Freire, Mara G.; Santos, Luís M. N. B. F.; Coutinho, João A. P.

    2014-01-01

    The design of ionic liquids has been focused on the cation-anion combinations but other more subtle approaches can be used. In this work the effect of the branching of the cation alkyl chain on the design of ionic liquids (ILs) is evaluated. The mutual solubilities with water and toxicities of a series of bis(trifluoromethylsulfonyl)-based ILs, combined with imidazolium, pyridinium, pyrrolidinium, and piperidinium cations with linear or branched alkyl chains, are reported. The mutual solubility measurements were carried out in the temperature range from (288.15 to 323.15) K. From the obtained experimental data, the thermodynamic properties of the solution (in the water-rich phase) were determined and discussed. The COnductor like Screening MOdel for Real Solvents (COSMO-RS) was used to predict the liquid-liquid equilibrium. Furthermore, molecular dynamic simulations were also carried out aiming to get a deeper understanding of these fluids at the molecular level. The results show that the increase in the number of atoms at the cation ring (from five to six) leads to a decrease in the mutual solubilities with water while increasing their toxicity, and as expected from the well-established relationship between toxicities and hydrophobicities of ILs. The branching of the alkyl chain was observed to decrease the water solubility in ILs, while increasing the ILs solubility in water. The inability of COSMO-RS to correctly predict the effect of branching alkyl chains toward water solubility on them was confirmed using molecular dynamic simulations to be due to the formation of nano-segregated structures of the ILs that are not taken into account by the COSMO-RS model. In addition, the impact of branched alkyl chains on the toxicity is shown to be not trivial and to depend on the aromatic nature of the ILs. PMID:25119425

  16. Activated-Sludge Nitrification in the Presence of Linear and Branched-Chain Alkyl Benzene Sulfonates

    PubMed Central

    Baillod, Charles R.; Boyle, W. C.

    1968-01-01

    The effects of biodegradable linear alkyl benzene sulfonate and branched-chain alkyl benzene sulfonate detergents on activated-sludge nitrification were investigated by administering a synthetic waste containing up to 23 mg of each detergent per liter to eight bench-scale, batch, activated-sludge units. It was found that both detergents tended to promote complete oxidation of ammonia to nitrate, whereas control units produced approximately equal amounts of nitrite and nitrate. Various hypotheses are offered to explain the phenomenon. PMID:5636474

  17. Spectroscopic study on interaction between three cationic surfactants with different alkyl chain lengths and DNA.

    PubMed

    Guo, Lili; Zhang, Zhaohong; Qiao, Heng; Liu, Miao; Shen, Manli; Yuan, Tianxin; Chen, Jing; Dionysiou, Dionysios D

    2015-01-01

    In this study, the interaction between cationic surfactants with different alkyl chain lengths, such as hexyltrimethyl ammonium bromide (HTAB), dodecyltrimethyl ammonium bromide (DTAB) and cetyltrimethyl ammonium bromide (CTAB), and DNA was investigated by UV-vis spectroscopy, fluorescence spectroscopy and viscosity techniques. The results showed that these three cationic surfactants with different hydrocarbon chain lengths could all interact with DNA. Their binding modes were estimated and their interaction strength was compared. In addition, the effects of the surfactant, NaCl and phosphate ion concentrations on the interaction were reviewed. It is wished that this work would provide some valuable references to investigate the influence of cationic surfactants with different alkyl chain lengths on DNA.

  18. Characterization of esterified cassava starch with long alkyl side chains and different substitution degrees.

    PubMed

    Barrios, Simón E; Giammanco, Giuseppe; Contreras, Jesús M; Laredo, Estrella; López-Carrasquero, Francisco

    2013-08-01

    The present work describes the characterization and thermal properties of hydrophobic starch obtained by the esterification of cassava starch with acyl imidazoles, acid chlorides and methyl ester derivatives of fatty acids with n-alkyl chains with 12-22 carbon atoms, in order to compare the dependence of their properties as a function of the length of the side chain and the methodology used for their synthesis. The n-acyl starches presented degrees of substitution (DS) between 0.06 and 1.2. Most of the derivatives obtained with acyl imidazoles were found to be stable at temperatures up to 300°C, whereas those synthesized with acid chlorides or methyl ester decomposed below. Finally, when the n-acyl starches were substituted with n-alkyl side chains of 16 or more carbon atoms, they were capable to crystallize in separate paraffinic phases independent of the starch backbone.

  19. Molecular design of boronic acid-functionalized squarylium cyanine dyes for multiple discriminant analysis of sialic acid in biological samples: selectivity toward monosaccharides controlled by different alkyl side chain lengths.

    PubMed

    Ouchi, Kazuki; Colyer, Christa L; Sebaiy, Mahmoud; Zhou, Jin; Maeda, Takeshi; Nakazumi, Hiroyuki; Shibukawa, Masami; Saito, Shingo

    2015-02-03

    We designed a new series of boronic acid-functionalized squarylium cyanine dyes (SQ-BA) with different lengths of alkyl chain residues, suitable for multiple discriminant analysis (MDA) of sialic acid (Neu5Ac) in biological samples. The SQ-BA dyes form aggregates based on hydrophobic interactions, which result in quenched fluorescence in aqueous solutions. When the boronic acid binds with saccharides, the fluorescence intensity increases as a result of dissociation to the emissive monomeric complex. We inferred that different dye aggregate structures (H-aggregates and J-aggregates) were induced depending on the alkyl chain length, so that monosaccharides would be recognized in different ways (especially, multipoint interaction with J-aggregates). A distinctive emission enhancement of SQ-BA dyes with shorter-alkyl-chains in the presence of Neu5Ac was observed (2.4-fold fluorescence enhancement; with formation constant 10(1.7) M(-1)), with no such enhancement for SQ-BA dyes with longer-alkyl-chain. In addition, various enhancement factors for other monosaccharides were observed depending on the alkyl chain length. Detailed thermodynamic and NMR studies of the SQ-BA complexes revealed the unique recognition mechanism: the dye aggregate with a shorter-alkyl-chain causes the slipped parallel structure and forms a stable 2:1 complex with Neu5Ac, as distinct from longer-alkyl-chain dyes, which form a 1:1 monomeric complex. MDA using the four SQ-BA dyes was performed for human urine samples, resulting in the successful discrimination between normal and abnormal Neu5Ac levels characteristic of disease. Thus, we successfully controlled various responses to similar monosaccharides with a novel approach that chemically modified not the boronic acid moiety itself but the length of the alkyl chain residue attached to the dye in order to generate specificity.

  20. DNA-directed alkylating agents. 3. Structure-activity relationships for acridine-linked aniline mustards: consequences of varying the length of the linker chain.

    PubMed

    Valu, K K; Gourdie, T A; Boritzki, T J; Gravatt, G L; Baguley, B C; Wilson, W R; Wakelin, L P; Woodgate, P D; Denny, W A

    1990-11-01

    Four series of acridine-linked aniline mustards have been prepared and evaluated for in vitro cytotoxicity, in vivo antitumor activity, and DNA cross-linking ability. The anilines were attached to the DNA-intercalating acridine chromophores by link groups (-O-, -CH2-, -S-, and -SO2-) of widely varying electronic properties, providing four series of widely differing mustard reactivity where the alkyl chain linking the acridine and mustard moieties was varied from two to five carbons. Relationships were sought between chain length and biological properties. Within each series, increasing the chain length did not alter the reactivity of the alkylating moiety but did appear to position it differently on the DNA, since cross-linking ability (measured by agarose gel assay) altered with chain length, being maximal with the C4 analogue. The in vivo antitumor activities of the compounds depended to some extent on the reactivity of the mustard, with the least reactive SO2 compounds being inactive. However, DNA-targeting did appear to allow the use of less reactive mustards, since the S-linked acridine mustards showed significant activity whereas the parent S-mustard did not. Within each active series, the most active compound was the C4 homologue, suggesting some relationship between activity and extent of DNA alkylation.

  1. Photocurrent enhancement from diketopyrrolopyrrole polymer solar cells through alkyl-chain branching point manipulation.

    PubMed

    Meager, Iain; Ashraf, Raja Shahid; Mollinger, Sonya; Schroeder, Bob C; Bronstein, Hugo; Beatrup, Daniel; Vezie, Michelle S; Kirchartz, Thomas; Salleo, Alberto; Nelson, Jenny; McCulloch, Iain

    2013-08-07

    Systematically moving the alkyl-chain branching position away from the polymer backbone afforded two new thieno[3,2-b]thiophene-diketopyrrolopyrrole (DPPTT-T) polymers. When used as donor materials in polymer:fullerene solar cells, efficiencies exceeding 7% were achieved without the use of processing additives. The effect of the position of the alkyl-chain branching point on the thin-film morphology was investigated using X-ray scattering techniques and the effects on the photovoltaic and charge-transport properties were also studied. For both solar cell and transistor devices, moving the branching point further from the backbone was beneficial. This is the first time that this effect has been shown to improve solar cell performance. Strong evidence is presented for changes in microstructure across the series, which is most likely the cause for the photocurrent enhancement.

  2. Thermodynamic Interactions between Polystyrene and Long-Chain Poly(n-Alkyl Acrylates) Derived from Plant Oils.

    PubMed

    Wang, Shu; Robertson, Megan L

    2015-06-10

    Vegetable oils and their fatty acids are promising sources for the derivation of polymers. Long-chain poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) are readily derived from fatty acids through conversion of the carboxylic acid end-group to an acrylate or methacrylate group. The resulting polymers contain long alkyl side-chains with around 10-22 carbon atoms. Regardless of the monomer source, the presence of alkyl side-chains in poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) provides a convenient mechanism for tuning their physical properties. The development of structured multicomponent materials, including block copolymers and blends, containing poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) requires knowledge of the thermodynamic interactions governing their self-assembly, typically described by the Flory-Huggins interaction parameter χ. We have investigated the χ parameter between polystyrene and long-chain poly(n-alkyl acrylate) homopolymers and copolymers: specifically we have included poly(stearyl acrylate), poly(lauryl acrylate), and their random copolymers. Lauryl and stearyl acrylate were chosen as model alkyl acrylates derived from vegetable oils and have alkyl side-chain lengths of 12 and 18 carbon atoms, respectively. Polystyrene is included in this study as a model petroleum-sourced polymer, which has wide applicability in commercially relevant multicomponent polymeric materials. Two independent methods were employed to measure the χ parameter: cloud point measurements on binary blends and characterization of the order-disorder transition of triblock copolymers, which were in relatively good agreement with one another. The χ parameter was found to be independent of the alkyl side-chain length (n) for large values of n (i.e., n > 10). This behavior is in stark contrast to the n-dependence of the χ parameter predicted from solubility parameter theory. Our study complements prior work investigating the interactions between

  3. U-shaped conformation of alkyl chains bound to a synthetic receptor cucurbit[8]uril.

    PubMed

    Ko, Young Ho; Kim, Youngkook; Kim, Hyunuk; Kim, Kimoon

    2011-02-01

    The behavior of a series of alkanes bound to the molecular host cucurbit[8]uril (CB[8]) has been systematically studied by 2D (1)H NMR spectroscopy and isothermal titration calorimetry (ITC). CB[8] and alkyltrimethylammonium (C(m) TA(+), (CH(3))(3)N(+)C(m)H(2m+1), m=6-16) form 1:1 host-guest complexes with a high binding constant (K≈10(6) m(-1)). The shortest hexyl chain of C(6)TA(+) can be fully encapsulated in an extended conformation inside the CB[8] cavity, which is driven by both enthalpy and entropy. However, for the longer aliphatic chains, C(8)-C(16), the long alkyl tails take a U-shaped conformation inside the cavity, and their complexation is dominantly or almost exclusively enthalpy-driven, owing to the increased van der Waals contact between the folded aliphatic chain and the inner wall of the host cavity. As the chain length increases from C(8) to C(16), the ammonium head group of the guests moves away from the portal of CB[8] while the long aliphatic tails maintain the U-shaped conformation inside the cavity. The complexation of C(m)TA(+) with CB[8] follows the enthalpy-entropy compensation rule commonly observed in molecular recognition systems. For example, among the guest molecules, C(12)TA(+) shows the highest enthalpic gain (most favorable), owing to the large van der Waals contact between the guest and the host cavity, and at the same time the most unfavorable entropic contribution, owing to the severe conformational restriction of the U-shaped alkyl chain inside the host. The enthalpy-entropy compensation plot for the complexation suggests large conformational changes of the long alkyl chains and extensive dehydration associated with the inclusion complex formation.

  4. Directing alkyl chain ordering of functional phosphorus coupling agents on ZrO2.

    PubMed

    Lomoschitz, Christoph J; Feichtenschlager, Bernhard; Moszner, Norbert; Puchberger, Michael; Müller, Klaus; Abele, Matthias; Kickelbick, Guido

    2011-04-05

    ZrO(2) powder (6.6 m(2)/g) was modified using polymerizable phosphorus-based coupling agents (P-CAs) (i.e., phosphonic acid, phosphoric acid, and bis-phosphonic acid), resulting in densely grafted layers as determined by thermogravimetry and elemental analysis (up to 4.2 molecules/nm(2)). The applied P-CAs contained a methacrylate group, which led to the covalent incorporation of a polymerizable moiety into the grafted layer. To direct the ordering of the alkyl chains in the layer, three different approaches were evaluated with respect to their structure-directing ability by means of FT-IR and nitrogen sorption at 77 K: (i) variation of the chain length, (ii) variation of the anchoring group and (iii) comodification with a defined amount of a nonfunctional phosphonic acid (variation of the functional/nonfunctional acid ratio). It was shown that the chain length and anchoring group size have significant effects on the alkyl chain ordering and morphology of the layer.

  5. Comparative Study of the Intermolecular Dynamics and Physical Properties of Branched and Linear Alkyl Chain Imidazolium Ionic Liquids

    NASA Astrophysics Data System (ADS)

    Xue, Lianjie; Bardak, Fehmi; Tamas, George; Gurung, Eshan; Quitevis, Edward; Koh, Yung; Simon, Sindee

    2014-03-01

    The optical Kerr effect (OKE) spectra, densities, viscosities, and transition temperatures of 1-alkyl-3-methylimidazolium bis{(trifluoromethane)sulfonyl}amide ionic liquids (ILs) with branched alkyl chains, -Cn-3CH(CH3)2 (branched ILs), were measured and compared to those with linear alkyl chains, -Cn-1CH3 (linear ILs), for n = 3, 4, 5, 6 and 7. The results show that a branched IL has a higher viscosity and transition temperature Tg than the corresponding linear IL with the same n, whereas the densities of each branched/linear IL pair are the same within experimental error. For short alkyl chains (n =3 and 4) the intermolecular part of the OKE spectrum of the branched ILs tends to be narrower and lower in frequency than that of the linear ILs. This suggests that branching softens the intermolecular modes. For long alkyl chains (n =5-7), the difference between the intermolecular spectrum of the branched IL and that of the linear IL with the same n decreases, which indicates that the branching effect becomes smaller when the alkyl chains get longer. This work was supported by NSF grant CHE-1153077.

  6. Sources and proxy potential of long chain alkyl diols in lacustrine environments

    NASA Astrophysics Data System (ADS)

    Rampen, Sebastiaan W.; Datema, Mariska; Rodrigo-Gámiz, Marta; Schouten, Stefan; Reichart, Gert-Jan; Sinninghe Damsté, Jaap S.

    2014-11-01

    Long chain 1,13- and 1,15-alkyl diols form the base of a number of recently proposed proxies used for climate reconstruction. However, the sources of these lipids and environmental controls on their distribution are still poorly constrained. We have analyzed the long chain alkyl diol (LCD) composition of cultures of ten eustigmatophyte species, with three species from different families grown at various temperatures, to identify the effect of species composition and growth temperature on the LCD distribution. The results were compared with the LCD distribution of sixty-two lake surface sediments, and with previously reported LCD distributions from marine environments. The different families within the Eustigmatophyceae show distinct LCD patterns, with the freshwater family Eustigmataceae most closely resembling LCD distributions in both marine and lake environments. Unlike the other two eustigmatophyte families analyzed (Monodopsidaceae and Goniochloridaceae), C28 and C30 1,13-alkyl diols and C30 and C32 1,15-alkyl diols are all relatively abundant in the family Eustigmataceae, while the mono-unsaturated C32 1,15-alkyl diol was below detection limit. In contrast to the marine environment, LCD distributions in lakes did not show a clear relationship with temperature. The Long chain Diol Index (LDI), a proxy previously proposed for sea surface temperature reconstruction, showed a relatively weak correlation (R2 = 0.33) with mean annual air temperature used as an approximation for annual mean surface temperature of the lakes. A much-improved correlation (R2 = 0.74, p-value <0.001) was observed applying a multiple linear regression analysis between LCD distributions and lake temperatures reconstructed using branched tetraether lipid distributions. The obtained regression model provides good estimates of temperatures for cultures of the family Eustigmataceae, suggesting that algae belonging to this family have an important role as a source for LCDs in lacustrine

  7. Conformation-Specific Spectroscopy of Alkyl Benzyl Radicals: Effects of a Radical Center on the CH Stretch Infrared Spectra of Alkyl Chains

    NASA Astrophysics Data System (ADS)

    Korn, Joseph A.; Zwier, Timothy S.; Tabor, Daniel P.; Sibert, Edwin

    2016-06-01

    An important step in combustion processes is the abstraction of hydrogen to form alkyl benzyl radicals. In this talk we present the results of double resonance spectroscopy methods to explore the conformation-specific infrared spectroscopy of α-methylbenzyl, α-ethylbenzyl, and α-propylbenzyl radicals. A local mode-Hamiltonian model that includes Fermi resonance interactions will be described. This model enables the assignment of the alkyl CH stretch IR spectra of these molecules. This talk will contrast the alkyl chain results to their closed shell analogues, focusing on the the role of the radical site which leads to two important effects. First the CH-stretch frequencies of the β-carbons are shifted by approximately 50 cm-1. Second, internal torsion about the C-C bond between the α-C and β-C atoms modulates these frequency shifts, this producing torsion-vibration mixing. The spectral consequences of this mixing are described.

  8. Alkyl chain length-dependent surface reaction of dodecahydro-N-alkylcarbazoles on Pt model catalysts

    SciTech Connect

    Gleichweit, Christoph; Amende, Max; Bauer, Udo; Schernich, Stefan; Höfert, Oliver; Lorenz, Michael P. A.; Zhao, Wei; Bachmann, Philipp; Papp, Christian; Müller, Michael; Koch, Marcus; Wasserscheid, Peter; Libuda, Jörg; Steinrück, Hans-Peter

    2014-05-28

    The concept of liquid organic hydrogen carriers (LOHC) holds the potential for large scale chemical storage of hydrogen at ambient conditions. Herein, we compare the dehydrogenation and decomposition of three alkylated carbazole-based LOHCs, dodecahydro-N-ethylcarbazole (H{sub 12}-NEC), dodecahydro-N-propylcarbazole (H{sub 12}-NPC), and dodecahydro-N-butylcarbazole (H{sub 12}-NBC), on Pt(111) and on Al{sub 2}O{sub 3}-supported Pt nanoparticles. We follow the thermal evolution of these systems quantitatively by in situ high-resolution X-ray photoelectron spectroscopy. We show that on Pt(111) the relevant reaction steps are not affected by the different alkyl substituents: for all LOHCs, stepwise dehydrogenation to NEC, NPC, and NBC is followed by cleavage of the C–N bond of the alkyl chain starting at 380–390 K. On Pt/Al{sub 2}O{sub 3}, we discern dealkylation on defect sites already at 350 K, and on ordered, (111)-like facets at 390 K. The dealkylation process at the defects is most pronounced for NEC and least pronounced for NBC.

  9. Vapor pressures of 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with long alkyl chains.

    PubMed

    Rocha, Marisa A A; Coutinho, João A P; Santos, Luís M N B F

    2014-10-07

    This work presents the vapor pressure at several temperatures for the 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide series, [CN/2CN/2im][NTf2] (N = 14, 16, 18, and 20), measured by a Knudsen effusion method combined with a quartz crystal microbalance. The thermodynamic properties of vaporization of the ionic liquids under study are analysed together with the results obtained previously for the shorter alkyl chain length [CN/2CN/2im][NTf2] (N = 2, 4, 6, 8, 10, and 12), in order to evaluate the effect of the alkyl side chains of the cation and to get additional insights concerning the nanostructuration of ionic liquids. The symmetry effect is explored, based on the comparison with the asymmetric imidazolium based ionic liquids, [CN-1C1im][NTf2]. A trend shift on the thermodynamic properties of vaporization along the alkyl side chains of the extended symmetric ionic liquids, around [C6C6im][NTf2], was detected. An intensification of the odd-even effect was observed starting from [C6C6im][NTf2], with higher enthalpies and entropies of vaporization for the odd numbered ionic liquids, [C7C7im][NTf2] and [C9C9im][NTf2]. Similar, but less pronounced, odd-even effect was found for the symmetric ionic liquids with lower alkyl side chains length, [CN/2CN/2im][NTf2] (with N = 4, 6, 8, 10, and 12). This effect is related with the predominant orientation of the terminal methyl group of the alkyl chain to the imidazolium ring and their influence in the cation-anion interaction. The same Critical Alkyl length at the hexyl, (C6C1and C6C6) was found for both asymmetric and symmetric series indicating that the nanostructuration of the ionic liquids is related with alkyl chain length.

  10. Effect of n-alkyl chain length on the complexation of phenanthrene and 9-alkyl-phenanthrene with $beta;-cyclodextrin

    NASA Astrophysics Data System (ADS)

    Rima, J.; Aoun, E.; Hanna, K.

    2004-06-01

    The characteristics of host-guest complexation between β-cyclodextrin (β-CD) and phenanthrene derivatives (phenanthrene, n-propyl, n-butyl and n-hexyl-phenanthrene) were investigated by fluorescence spectrometry. Linear and non-linear regression methods were used to estimate the formation constants ( K1). A 1:1 stoichiometric ratio and an effect of n-alkyl chain length on the formation constant were observed for the binary inclusion complex between guest and β-CD. The formation constant dramatically increases with the length of n-alkyl, it starts from the value of 140 l mol -1 for the phenanthrene to reach the value of 580 l mol -1 for hexyl-phenanthrene. The effect of the temperature on the fluorescence intensity of each complex (guest-host) was also studied; and then the thermodynamic parameters were calculated. The main inclusion site seems to be aromatic moiety for short chain molecules, and it moves toward the alkyl chain part, as the chain becomes longer.

  11. Fluoroalkyl and alkyl chains have similar hydrophobicities in binding to the "hydrophobic wall" of carbonic anhydrase.

    PubMed

    Mecinović, Jasmin; Snyder, Phillip W; Mirica, Katherine A; Bai, Serena; Mack, Eric T; Kwant, Richard L; Moustakas, Demetri T; Héroux, Annie; Whitesides, George M

    2011-09-07

    The hydrophobic effect, the free-energetically favorable association of nonpolar solutes in water, makes a dominant contribution to binding of many systems of ligands and proteins. The objective of this study was to examine the hydrophobic effect in biomolecular recognition using two chemically different but structurally similar hydrophobic groups, aliphatic hydrocarbons and aliphatic fluorocarbons, and to determine whether the hydrophobicity of the two groups could be distinguished by thermodynamic and biostructural analysis. This paper uses isothermal titration calorimetry (ITC) to examine the thermodynamics of binding of benzenesulfonamides substituted in the para position with alkyl and fluoroalkyl chains (H(2)NSO(2)C(6)H(4)-CONHCH(2)(CX(2))(n)CX(3), n = 0-4, X = H, F) to human carbonic anhydrase II (HCA II). Both alkyl and fluoroalkyl substituents contribute favorably to the enthalpy and the entropy of binding; these contributions increase as the length of chain of the hydrophobic substituent increases. Crystallography of the protein-ligand complexes indicates that the benzenesulfonamide groups of all ligands examined bind with similar geometry, that the tail groups associate with the hydrophobic wall of HCA II (which is made up of the side chains of residues Phe131, Val135, Pro202, and Leu204), and that the structure of the protein is indistinguishable for all but one of the complexes (the longest member of the fluoroalkyl series). Analysis of the thermodynamics of binding as a function of structure is compatible with the hypothesis that hydrophobic binding of both alkyl and fluoroalkyl chains to hydrophobic surface of carbonic anhydrase is due primarily to the release of nonoptimally hydrogen-bonded water molecules that hydrate the binding cavity (including the hydrophobic wall) of HCA II and to the release of water molecules that surround the hydrophobic chain of the ligands. This study defines the balance of enthalpic and entropic contributions to the

  12. Synthesis, nematocidal activity and SAR study of novel difluoromethylpyrazole carboxamide derivatives containing flexible alkyl chain moieties.

    PubMed

    Liu, Xing-Hai; Zhao, Wen; Shen, Zhong-Hua; Xing, Jia-Hua; Xu, Tian-Ming; Peng, Wei-Li

    2017-01-05

    A series of novel difluoromethylpyrazole carboxamides derivatives were synthesized by introduction of flexible alkyl chain. Nematicidal bioassay results showed that some of them exhibited good control efficacy against M. incognita, which indicated that these difluoromethylpyrazole carboxamides derivatives might be potential novel lead compounds for discovery new nematicides. The nematicidal activity was affected by the substituted position in the molecule, especially the substitution group on the alkyl chain. It was found that the compound 6-9 and 6-23 possess about 50% inhibition effect against M. incognita even at 5.0 and 1.0 mg L(-1). Meanwhile, greenhouse field trial showed the nematicidal activity of compound 6-9 is a litter weaker than that of Abamectin. The mammalian toxicology results indicated that compound 6-9 was a low-toxicity and low-sensitive compound. In conclusion compound 6-9 is a potential candidate for further development. In addition, the molecular docking simulations revealed that compounds 6 with a flexible NHCOO show its binding affinities for the acetylcholine receptor (AChR), which may provide useful information for further design novel nematicides.

  13. Influence of Solute Charge and Pyrrolidinium Ionic Liquid Alkyl Chain Length on Probe Rotational Reorientation Dynamics

    SciTech Connect

    Guo, Jianchang; Mahurin, Shannon Mark; Baker, Gary A; Hillesheim, Patrick C; Dai, Sheng; Shaw, Robert W

    2014-01-01

    In recent years, the effect of molecular charge on the rotational dynamics of probe solutes in room temperature ionic liquids (RTILs) has been a subject of growing interest. For the purpose of extending our understanding of charged solute behavior within RTILs, we have studied the rotational dynamics of three illustrative xanthene fluorescent probes within a series of N-alkylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([Cnmpyr][Tf2N]) RTILs with different n-alkyl chain lengths (n = 3, 4, 6, 8, or 10) using time-resolved fluorescence anisotropy decay. The rotational dynamics of the neutral probe rhodamine B dye lies between the stick and slip boundary conditions due to the influence of specific hydrogen bonding interactions. The rotation of the negatively-charged sulforhodamine 640 is slower than that of its positively-charged counterpart rhodamine 6G. An analysis based upon Stokes-Einstein-Debye hydrodynamics indicates that SR640 adheres to stick boundary conditions due to specific interactions, whereas the faster rotation of R6G is attributed to weaker electrostatic interactions. No dependence of the rotational dynamics on the solvent alkyl chain length was observed for any of the three dyes, suggesting that the specific interactions between dyes and RTILs are independent of this solvent parameter.

  14. The effect of varying short-chain alkyl substitution on the molar absorptivity and quantum yield of cyanine dyes.

    PubMed

    Chapman, Gala; Henary, Maged; Patonay, Gabor

    2011-01-01

    The effect of varying short-chain alkyl substitution of the indole nitrogens on the spectroscopic properties of cyanine dyes was examined. Molar absorptivities and fluorescence quantum yields were determined for a set of pentamethine dyes and a set of heptamethine dyes for which the substitution of the indole nitrogen was varied. For both sets of dyes, increasing alkyl chain length resulted in no significant change in quantum yield or molar absorptivity. These results may be useful in designing new cyanine dyes for analytical applications and predicting their spectroscopic properties.

  15. Straight-Chain Alkyl Isocyanides Open the Distal Histidine Gate in Crystal Structures of Myoglobin†

    PubMed Central

    Smith, Rober D.; Blouin, George C.; Johnson, Kenneth A.; Phillips, George N.; Olson, John S.

    2014-01-01

    Crystal structures of methyl, ethyl, propyl and butyl isocyanide bound to sperm whale myoglobin (Mb) reveal two major conformations. In the in conformer, His(E7) is in a “closed” position, forcing the ligand alkyl chain to point inward. In the out conformer, His(E7) is in an “open” position, allowing the ligand side chain to point outward. A progressive increase in the population of the out conformer is observed with increasing ligand length in P21 crystals of native Mb at pH 7.0. This switch from in to out with increasing ligand size also occurs in solution as measured by the decrease in the relative intensity of the low (~2075 cm 1) versus high frequency (~2125 cm 1) isocyano bands. In contrast, all four isocyanides in P6 crystals of wild type recombinant Mb occupy the in conformation. However, mutating either His64 to Ala, creating a “hole” to solvent, or Phe46 to Val, freeing rotation of His64, causes bound butyl isocyanide to point completely outward in P6 crystals. Thus, the unfavorable hindrance caused with crowding a large alkyl side chain into the distal pocket appears to be roughly equal to that for pushing open the His(E7) gate and is easily affected by crystal packing. This structural conclusion supports the “side path” kinetic mechanism for O2 release, in which the dissociated ligand first moves toward the protein interior and then encounters steric resistance, which is roughly equal to that for escaping to solvent through the His(E7) channel. PMID:20481504

  16. Effect of surfactant alkyl chain length on soil cadmium desorption using surfactant/ligand systems.

    PubMed

    Shin, Mari; Barrington, Suzelle F; Marshall, William D; Kim, Jin-Woo

    2005-02-01

    The effect of surfactant alkyl chain length on soil Cd desorption was studied using nonionic surfactants of polyethylene oxide (PEO) of PEO chain lengths of 7.5 (Triton X-114), 9.5 (Triton X-100), 30 (Triton X-305), or 40 units (Triton X-405) in combination with the I- ligand. Triplicate 1 g soil samples were equilibrated with 15 ml of surfactant-ligand mixture, at concentrations of 0.025, 0.50 or 0.10, and 0.0, 0.168 or 0.336 mol/l, respectively. After shaking the samples for 24 h, the supernatant fraction was analyzed for Cd content to determine the percent of Cd desorbed from the soil. After five successive washings, 53%, 40% and 25% of Cd had been desorbed by 0.025, 0.050 or 0.10 mol/l of Triton X-114, respectively, in the presence of 0.336 mol/l of I-, whereas with the same conditions, Triton X-100 desorbed 61%, 57% and 56% Cd and either Triton X-305 or Triton X-405 desorbed 51, 40 and 14 to 16% Cd. The most efficient Cd desorption was obtained using 0.025 mol/l Triton X-100 in admixture with 0.336 mol/l I-. Increased surfactant concentration was detrimental to Cd desorption consistent with a process that blocked ligand access to the soil particle surface. After 5 washings,the cumulative cadmium desorption decreased with increasing surfactant alkyl chain length, indicating that the metal-ligand complexes are preferably stabilized by the micelles' hydrophobic octyl phenyl (OP) group rather than by the hydrophilic PEO group. In the absence of ligand, the surfactants alone desorbed less than 1% Cd from the contaminated soil, suggesting that the ligand, rather than the surfactant, extracts the metal, to be subsequently stabilized within the surfactant micelles.

  17. Protein–Ligand Interactions: Thermodynamic Effects Associated with Increasing the Length of an Alkyl Chain

    PubMed Central

    2013-01-01

    Thermodynamic parameters were determined for complex formation between the Grb2 SH2 domain and tripeptides of the general form Ac-pTyr-Xaa-Asn in which the Xaa residue bears a linear alkyl chain varying in length from 1–5 carbon atoms. Binding affinity increases upon adding a methylene group to the Ala derivative, but further chain extension gives no extra enhancement in potency. The thermodynamic signatures of the ethyl and n-propyl derivatives are virtually identical as are those for the n-butyl and n-pentyl analogues. Crystallographic analysis of the complexes reveals a high degree of similarity in the structure of the domain and the bound ligands with the notable exception that there is a gauche interaction in the side chains in the bound conformations of ligands having n-propyl, n-butyl, and n-pentyl groups. However, eliminating this unfavorable interaction by introducing a Z-double bond into the side chain of the n-propyl analogue does not result in an increase in affinity. Increases in the amount of nonpolar surface that is buried upon ligand binding correlate with favorable changes in ΔH°, but these are usually offset by corresponding unfavorable changes in −TΔS°; there is little correlation of ΔCp with changes in the amount of buried nonpolar surface. PMID:24349642

  18. Growth mechanisms of 2D organic assemblies generated from dialkylated melaminium derivatives: the length difference of the two alkyl chains that matters.

    PubMed

    Xu, Jun; Wu, Guanglu; Wang, Zhiqiang; Zhang, Xi

    2013-08-27

    This research is aimed to understand the growth mechanisms for self-assembly of dialkylated melamine derivatives. The dialkylated melamine derivatives with different alkyl chains (Mela-m-n) are able to self-assemble with hydrochloric acid in dichloromethane to form 2D organic assemblies, exhibiting similar lamellar structures as Mela-n·HCl with identical alkyl chains. The most interesting finding is that the growth mechanism of Mela-n·HCl with identical alkyl chains is revealed to be layer growth, while Mela-m-n·HCl with asymmetric alkyl chains adopts a spiral growth mechanism. The asymmetric alkyl chains in Mela-m-n may lead to the formation of dislocation, which is responsible for the spiral growth mechanism.

  19. Microbial biodegradation of aromatic alkanoic naphthenic acids is affected by the degree of alkyl side chain branching

    PubMed Central

    Johnson, Richard J; Smith, Ben E; Sutton, Paul A; McGenity, Terry J; Rowland, Steven J; Whitby, Corinne

    2011-01-01

    Naphthenic acids (NAs) occur naturally in oil sands and enter the environment through natural and anthropogenic processes. NAs comprise toxic carboxylic acids that are difficult to degrade. Information on NA biodegradation mechanisms is limited, and there are no studies on alkyl branched aromatic alkanoic acid biodegradation, despite their contribution to NA toxicity and recalcitrance. Increased alkyl side chain branching has been proposed to explain NA recalcitrance. Using soil enrichments, we examined the biodegradation of four aromatic alkanoic acid isomers that differed in alkyl side chain branching: (4′-n-butylphenyl)-4-butanoic acid (n-BPBA, least branched); (4′-iso-butylphenyl)-4-butanoic acid (iso-BPBA); (4′-sec-butylphenyl)-4-butanoic acid (sec-BPBA) and (4′-tert-butylphenyl)-4-butanoic acid (tert-BPBA, most branched). n-BPBA was completely metabolized within 49 days. Mass spectral analysis confirmed that the more branched isomers iso-, sec- and tert-BPBA were transformed to their butylphenylethanoic acid (BPEA) counterparts at 14 days. The BPEA metabolites were generally less toxic than BPBAs as determined by Microtox assay. n-BPEA was further transformed to a diacid, showing that carboxylation of the alkyl side chain occurred. In each case, biodegradation of the carboxyl side chain proceeded through beta-oxidation, which depended on the degree of alkyl side chain branching, and a BPBA degradation pathway is proposed. Comparison of 16S rRNA gene sequences at days 0 and 49 showed an increase and high abundance at day 49 of Pseudomonas (sec-BPBA), Burkholderia (n-, iso-, tert-BPBA) and Sphingomonas (n-, sec-BPBA). PMID:20962873

  20. Microbial biodegradation of aromatic alkanoic naphthenic acids is affected by the degree of alkyl side chain branching.

    PubMed

    Johnson, Richard J; Smith, Ben E; Sutton, Paul A; McGenity, Terry J; Rowland, Steven J; Whitby, Corinne

    2011-03-01

    Naphthenic acids (NAs) occur naturally in oil sands and enter the environment through natural and anthropogenic processes. NAs comprise toxic carboxylic acids that are difficult to degrade. Information on NA biodegradation mechanisms is limited, and there are no studies on alkyl branched aromatic alkanoic acid biodegradation, despite their contribution to NA toxicity and recalcitrance. Increased alkyl side chain branching has been proposed to explain NA recalcitrance. Using soil enrichments, we examined the biodegradation of four aromatic alkanoic acid isomers that differed in alkyl side chain branching: (4'-n-butylphenyl)-4-butanoic acid (n-BPBA, least branched); (4'-iso-butylphenyl)-4-butanoic acid (iso-BPBA); (4'-sec-butylphenyl)-4-butanoic acid (sec-BPBA) and (4'-tert-butylphenyl)-4-butanoic acid (tert-BPBA, most branched). n-BPBA was completely metabolized within 49 days. Mass spectral analysis confirmed that the more branched isomers iso-, sec- and tert-BPBA were transformed to their butylphenylethanoic acid (BPEA) counterparts at 14 days. The BPEA metabolites were generally less toxic than BPBAs as determined by Microtox assay. n-BPEA was further transformed to a diacid, showing that carboxylation of the alkyl side chain occurred. In each case, biodegradation of the carboxyl side chain proceeded through beta-oxidation, which depended on the degree of alkyl side chain branching, and a BPBA degradation pathway is proposed. Comparison of 16S rRNA gene sequences at days 0 and 49 showed an increase and high abundance at day 49 of Pseudomonas (sec-BPBA), Burkholderia (n-, iso-, tert-BPBA) and Sphingomonas (n-, sec-BPBA).

  1. Vapor pressures of 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with long alkyl chains

    SciTech Connect

    Rocha, Marisa A. A. E-mail: marisa.alexandra.rocha@gmail.com; Coutinho, João A. P.; Santos, Luís M. N. B. F. E-mail: marisa.alexandra.rocha@gmail.com

    2014-10-07

    This work presents the vapor pressure at several temperatures for the 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide series, [C{sub N/2}C{sub N/2}im][NTf{sub 2}] (N = 14, 16, 18, and 20), measured by a Knudsen effusion method combined with a quartz crystal microbalance. The thermodynamic properties of vaporization of the ionic liquids under study are analysed together with the results obtained previously for the shorter alkyl chain length [C{sub N/2}C{sub N/2}im][NTf{sub 2}] (N = 2, 4, 6, 8, 10, and 12), in order to evaluate the effect of the alkyl side chains of the cation and to get additional insights concerning the nanostructuration of ionic liquids. The symmetry effect is explored, based on the comparison with the asymmetric imidazolium based ionic liquids, [C{sub N-1}C{sub 1}im][NTf{sub 2}]. A trend shift on the thermodynamic properties of vaporization along the alkyl side chains of the extended symmetric ionic liquids, around [C{sub 6}C{sub 6}im][NTf{sub 2}], was detected. An intensification of the odd-even effect was observed starting from [C{sub 6}C{sub 6}im][NTf{sub 2}], with higher enthalpies and entropies of vaporization for the odd numbered ionic liquids, [C{sub 7}C{sub 7}im][NTf{sub 2}] and [C{sub 9}C{sub 9}im][NTf{sub 2}]. Similar, but less pronounced, odd-even effect was found for the symmetric ionic liquids with lower alkyl side chains length, [C{sub N/2}C{sub N/2}im][NTf{sub 2}] (with N = 4, 6, 8, 10, and 12). This effect is related with the predominant orientation of the terminal methyl group of the alkyl chain to the imidazolium ring and their influence in the cation-anion interaction. The same Critical Alkyl length at the hexyl, (C{sub 6}C{sub 1}and C{sub 6}C{sub 6}) was found for both asymmetric and symmetric series indicating that the nanostructuration of the ionic liquids is related with alkyl chain length.

  2. Alkyl Chain Length and Temperature Effects on Structural Properties of Pyrrolidinium-Based Ionic Liquids: A Combined Atomistic Simulation and Small-Angle X-ray Scattering Study

    SciTech Connect

    Li, Song; Bañuelos, José Leobardo; Guo, Jianchang; Anovitz, Lawrence; Rother, Gernot; Shaw, Robert W.; Hillesheim, Patrick C.; Dai, Sheng; Baker, Gary A.; Cummings, Peter T.

    2011-12-21

    Molecular dynamics (MD) simulations of 1-alkyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide ([CnMPy][Tf₂N], n = 3, 4, 6, 8, 10) were conducted using an all-atom model. Radial distribution functions (RDF) were computed and structure functions were generated to compare with new X-ray scattering experimental results, reported herein. The scattering peaks in the structure functions generally shift to lower Q values with increased temperature for all the liquids in this series. However, the first sharp diffraction peak (FSDP) in the longer alkyl chain liquids displays a marked shift to higher Q values with increasing temperature. Alkyl chain-dependent ordering of the polar groups and increased tail aggregation with increasing alkyl chain length were observed in the partial pair correlation functions and the structure functions. The reasons for the observed alkyl chain-dependent phenomena and temperature effects were explored.

  3. Alkyl Chain Length and Temperature Effects on Structural Properties of Pyrrolidinium-Based Ionic Liquids: A Combined Atomistic Simulation and Small-Angle X-ray Scattering Study.

    SciTech Connect

    Li, Song; Banuelos, Jose Leo; Guo, Jianchang; Anovitz, Lawrence {Larry} M; Rother, Gernot; Shaw, Robert W; Hillesheim, Patrick C; Dai, Sheng; Baker, Gary A; Cummings, Peter T

    2011-01-01

    Molecular dynamics (MD) simulations of 1-alkyl-1-methylpyrrolidinium 12 bis(trifluoromethanesulfonyl)imide ([CnMPy][Tf2N], n = 3, 4, 6, 8, 10) were conducted 13 using an all-atom model. Radial distribution functions (RDF) were computed and structure 14 functions were generated to compare with new X-ray scattering experimental results, 15 reported herein. The scattering peaks in the structure functions generally shift to lower Q 16 values with increased temperature for all the liquids in this series. However, the first sharp 17 diffraction peak (FSDP) in the longer alkyl chain liquids displays a marked shift to higher Q 18 values with increasing temperature. Alkyl chain-dependent ordering of the polar groups and 19 increased tail aggregation with increasing alkyl chain length were observed in the partial pair 20 correlation functions and the structure functions. The reasons for the observed alkyl chain- 21 dependent phenomena and temperature effects were explored.

  4. Alkyl Chain Growth on a Transition Metal Center: How Does Iron Compare to Ruthenium and Osmium?

    PubMed

    Sainna, Mala A; de Visser, Sam P

    2015-09-28

    Industrial Fischer-Tropsch processes involve the synthesis of hydrocarbons usually on metal surface catalysts. On the other hand, very few homogeneous catalysts are known to perform a Fischer-Tropsch style of reaction. In recent work, we established the catalytic properties of a diruthenium-platinum carbene complex, [(CpRu)₂(μ²-H) (μ²-NHCH₃)(μ³-C)PtCH₃(P(CH₃)₃)₂](CO)n⁺ with n=0, 2 and Cp=η⁵-C₅(CH₃)₅, and showed it to react efficiently by initial hydrogen atom transfer followed by methyl transfer to form an alkyl chain on the Ru-center. In particular, the catalytic efficiency was shown to increase after the addition of two CO molecules. As such, this system could be viewed as a potential homogeneous Fischer-Tropsch catalyst. Herein, we have engineered the catalytic center of the catalyst and investigated the reactivity of trimetal carbene complexes of the same type using iron, ruthenium and osmium at the central metal scaffold. The work shows that the reactivity should increase from diosmium to diruthenium to diiron; however, a non-linear trend is observed due to multiple factors contributing to the individual barrier heights. We identified all individual components of these reaction steps in detail and established the difference in reactivity of the various complexes.

  5. A chiroptical switch based on supramolecular chirality transfer through alkyl chain entanglement and dynamic covalent bonding.

    PubMed

    Lv, Kai; Qin, Long; Wang, Xiufeng; Zhang, Li; Liu, Minghua

    2013-12-14

    Chirality transfer is an interesting phenomenon in Nature, which represents an important step to understand the evolution of chiral bias and the amplification of the chirality. In this paper, we report the chirality transfer via the entanglement of the alkyl chains between chiral gelator molecules and achiral amphiphilic Schiff base. We have found that although an achiral Schiff base amphiphile could not form organogels in any kind of organic solvents, it formed co-organogels when mixed with a chiral gelator molecule. Interestingly, the chirality of the gelator molecules was transferred to the Schiff base chromophore in the mixed co-gels and there was a maximum mixing ratio for the chirality transfer. Furthermore, the supramolecular chirality was also produced based on a dynamic covalent chemistry of an imine formed by the reaction between an aldehyde and an amine. Such a covalent bond of imine was formed reversibly depending on the pH variation. When the covalent bond was formed the chirality transfer occurred, when it was destroyed, the transfer stopped. Thus, a supramolecular chiroptical switch is obtained based on supramolecular chirality transfer and dynamic covalent chemistry.

  6. Nanostructure of mixtures of protic ionic liquids and lithium salts: effect of alkyl chain length.

    PubMed

    Méndez-Morales, Trinidad; Carrete, Jesús; Rodríguez, Julio R; Cabeza, Óscar; Gallego, Luis J; Russina, Olga; Varela, Luis M

    2015-02-21

    The bulk structure of mixtures of two protic ionic liquids, propylammonium nitrate and butylammonium nitrate, with a salt with a common anion, is analyzed at room temperature by means of small angle X-ray scattering and classical molecular dynamics simulations. The study of several structural properties, such as density, radial distribution functions, spatial distribution functions, hydrogen bonds, coordination numbers and velocity autocorrelation functions, demonstrates that increasing the alkyl chain length of the alkylammonium cation results in more segregated, better defined polar and apolar domains, the latter having a larger size. This increase, ascribed to the erosion of the H-bond network in the ionic liquid polar regions as salt is added, is confirmed by means of small angle X-ray scattering measurements, which show a clear linear increase of the characteristic spatial sizes of the studied protic ionic liquids with salt concentration, similar to that previously reported for ethylammonium nitrate (J. Phys. Chem. B, 2014, 118, 761-770). In addition, larger ionic liquid cations lead to a lower degree of hydrogen bonding and to more sparsely packed three-dimensional structures, which are more easily perturbed by the addition of lithium salts.

  7. Influence of alkyl chain length on the surface activity of antibacterial polymers derived from ROMP.

    PubMed

    Altay, Esra; Yapaöz, Melda Altıkatoğlu; Keskin, Bahadır; Yucesan, Gundoğ; Eren, Tarik

    2015-03-01

    The purpose of this study is to understand the antibacterial properties of cationic polymers on solid surfaces by investigating the structure-activity relationships. The polymer synthesis was carried via ring opening metathesis polymerization (ROMP) of oxanorbornene derivatives. Modulation of molecular weights and alkyl chain lengths of the polymers were studied to investigate the antibacterial properties on the glass surface. Fluorescein (Na salt) staining contact angle measurements were used to characterize the positive charge density and hydrophobicity on the polymer coated surfaces. Positive charge density for the surface coated polymers with molecular weights of 3000 and 10,000 g mol(-1) is observed to be in the range of 2.3-28.5 nmol cm(-2). The ROMP based cationic pyridinium polymer with hexyl unit exhibited the highest bactericidal efficiency against Escherichia coli on solid surface killing 99% of the bacteria in 5 min. However, phenyl and octyl functionalized quaternary pyridinium groups exhibited lower biocidal properties on the solid surfaces compared to their solution phase biocidal properties. Studying the effect of threshold polymer concentrations on the antibacterial properties indicated that changing the concentrations of polymer coatings on the solid surface dramatically influences antibacterial efficiency.

  8. Imidiazolium based ionic liquids: effects of different anions and alkyl chains lengths on the barley seedlings.

    PubMed

    Cvjetko Bubalo, Marina; Hanousek, Karla; Radošević, Kristina; Gaurina Srček, Višnja; Jakovljević, Tamara; Radojčić Redovniković, Ivana

    2014-03-01

    We studied the effects of five imidiazolium based ionic liquids with different anions and length of alkyl chains linked to imidazolium ring on the early development of barley (Hordeum vulgare). The inhibitory effect depends on the ionic liquids concentration and chemical structure, whereby the most toxic one was [C10mim][Br], followed by [C7mim][Br], [C4mim][Br], [C4mim][CH3CO2] and [C4mim][BF4]. Both anion and cation structures affected the toxicity of ionic liquid indicating that selection of more biocompatible anions such as [CH3CO2] does not necessarily indicate lower toxicity. Alternation in the extent of oxidative stress and antioxidant enzymes activities were found in barley plants due to ionic liquid treatments. When seedlings were exposed to higher concentrations of ionic liquids, antioxidant system could not effectively remove reactive oxidative species, leading to lipid peroxidation and damage of the photosynthetic system. However, overall data indicated that the performance of barley seedling was improved when all measured enzymes involved in scavenging of reactive oxygen species (ROS) were increased with special emphasis on GPX activities. Since there are no studies about ionic liquid (IL) toxicity in plants, that simultaneously evaluates the antioxidative enzyme system in response to different ILs, this work is valuable for gaining knowledge about the protection mechanism of plants from oxidative stress caused by IL exposure.

  9. Synthesis and evaluation of tamoxifen derivatives with a long alkyl side chain as selective estrogen receptor down-regulators.

    PubMed

    Shoda, Takuji; Kato, Masashi; Harada, Rintaro; Fujisato, Takuma; Okuhira, Keiichiro; Demizu, Yosuke; Inoue, Hideshi; Naito, Mikihiko; Kurihara, Masaaki

    2015-07-01

    Estrogen receptors (ERs) play a major role in the growth of human breast cancer cells. An antagonist that acts as not only an inhibitor of ligand binding but also an inducer of the down-regulation of ER would be useful for the treatment for ER-positive breast cancer. We previously reported the design and synthesis of a selective estrogen receptor down-regulator (SERD), (E/Z)-4-(1-{4-[2-(dodecylamino)ethoxy]phenyl}-2-phenylbut-1-en-1-yl)phenol (C12), which is a tamoxifen derivative having a long alkyl chain on the amine moiety. This compound induced degradation of ERα via a proteasome-dependent pathway and showed an antagonistic effect in MCF-7 cells. With the aim of increasing the potency of SERDs, we designed and synthesized various tamoxifen derivatives that have various lengths and terminal groups of the long alkyl side chain. During the course of our investigation, C10F having a 10-fluorodecyl group on the amine moiety of 4-OHT was shown to be the most potent compound among the tamoxifen derivatives. Moreover, computational docking analysis suggested that the long alkyl chain interacted with the hydrophobic region on the surface of the ER, which is a binding site of helix 12 and coactivator. These results provide useful information to develop promising candidates as SERDs.

  10. Effects of tethering alkyl chains for amphiphilic ruthenium complex dyes on their adsorption to titanium oxide and photovoltaic properties.

    PubMed

    Ni, Jen-Shyang; Hung, Chun-Yi; Liu, Ken-Yen; Chang, Yu-Hsun; Ho, Kuo-Chuan; Lin, King-Fu

    2012-11-15

    Ruthenium (II) complex dye, Ru(4,4'-dicarboxyl-2,2'-bipyridine)(4-nonyl-2,2'-bipyridine) (NCS)(2), (denoted as RuC9) tethering single alkyl chain was synthesized and well characterized. Its adsorption behavior onto the mesoporous TiO(2) and photovoltaic properties were compared with Z907 which has similar chemical structure but tethers two alkyl chains. RuC9 dyes tend to aggregate into vesicles in the acetonitrile/t-butanol co-solvent as a result of the amphiphilic structure, whereas Z907 dyes aggregate into lamellae. The dye-sensitized solar cell (DSSC) with RuC9 dye showed higher short-circuit photocurrent than that with Z907, attributing to its higher molar optical extinction coefficient and more adsorption amount onto the mesoporous TiO(2). However, the DSSC with Z907 dye has higher open-circuit photovoltage and power conversion efficiency, presumably due to the fact that Z907 with more alkyl chains formed a molecular layer with higher hydrophobicity. It reduced the charge recombination in the interface between the dye-sensitized mesoporous TiO(2) and electrolyte as verified by the electrochemical impedance spectroscopy and intensity modulated photocurrent and photovoltage spectroscopies.

  11. Molecular dynamics study of the effect of alkyl chain length on melting points of [CnMIM][PF6] ionic liquids

    SciTech Connect

    Zhang, Y; Maginn, EJ

    2014-01-01

    Based on molecular dynamics simulations, the melting points T-m of a series of 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids [CnMIM][PF6] with n = 2, 4, 10, 12, and 14 were studied using the free energy-based pseudosupercritical path (PSCP) method. The experimental trend that the Tm decreases with increasing alkyl chain length for ILs with short alkyl chains and increases for the ones with long alkyl chains was correctly captured. Further analysis revealed that the different trends are the results of the balance between fusion enthalpy and fusion entropy. For the ILs with short alkyl chains (ethyl and butyl groups), fusion entropy plays the dominant role so that [C4MIM][PF6], which has a larger fusion entropy due to its higher liquid phase entropy has the lower melting temperature. As for the ILs with long alkyl chains, due to the enhanced van der Waals interactions brought about by the long non-polar alkyl chains, enthalpy becomes the deciding factor and the melting points increase when the alkyl chain goes from C10 to C14. While the melting points for [C2MIM][PF6] and [C4MIM][PF6] were quantitatively predicted and the trends for the long chain ILs were captured correctly, the absolute melting points for [C10MIM][PF6], [C12MIM][PF6] and [C14MIM][PF6] were systematically overestimated in the simulations. Three possible reasons for the overestimation were studied but all ruled out. Further simulation or experimental studies are needed to explain the difference.

  12. Systematic investigation of zinc aminoalkylphosphonates: influence of the alkyl chain lengths on the structure formation.

    PubMed

    Schmidt, Corinna; Stock, Norbert

    2012-03-05

    With the high-throughput (HT) methodology, the bifunctional aminoalkylphosphonic acids (AAPA) linker molecules 2-aminoethyl- (AEPA), 3-aminopropyl- (APPA), and 4-aminobutylphosphonic acid (ABPA) [HO(3)P-C(n)H(2n)-NH(2) (n = 2-4)] and zinc nitrate were used to synthesize new metal phosphonates in order to investigate the influence of the alkyl chain length on the structure formation. The systematic investigations led to one known (ZnO(3)PC(2)H(4)NH(2)) and six new compounds: one using AEPA, three using APPA, and two using ABPA. The crystal structures of five compounds were determined by single crystal X-ray diffraction, using X-ray powder diffraction (XRPD) data as well as structure modeling employing force field methods. For compound 1, Zn(O(3)P-C(2)H(4)-NH(3))(NO(3))(H(2)O) (monoclinic, Cc, a = 4.799(1) Å, b = 29.342(6) Å, c = 5.631(1) Å, β = 91.59(3)°, V = 792.7(3) Å(3), Z = 4), and compound 2, Zn(2)(OH)(O(3)P-C(3)H(6)-NH(3))(NO(3)) (monoclinic, P2/c, a = 12.158(2) Å, b = 5.0315(10) Å, c = 13.952(3) Å, β = 113.23(3)°, V = 784.3(3) Å(3), Z = 2), the structures were determined using single crystal X-ray diffraction data. The crystal structures of [Zn(O(3)P-C(3)H(6)-NH(2))]·H(2)O (3) (monoclinic, P2(1)/c, a = 9.094(2) Å, b = 5.0118(7) Å, c = 16.067(4) Å, β = 90.38(2)°, V = 732.3(2) Å(3), Z = 4) and Zn(O(3)P-C(4)H(8)-NH(2)) (5) (monoclinic, P2(1)/c, a = 8.570(7) Å, b = 8.378(4) Å, c = 9.902(6) Å, β = 90.94(5)°, V = 710.9(8) Å(3), Z = 4) were determined using XRPD data. The structural model for compound 6, Zn(O(3)P-C(4)H(8)-NH(3))(NO(3))(H(2)O), was established using lattice parameters from XRPD data and following crystal structure modeling employing force field methods. The structures depend strongly on the alkyl chain length n. For n = 2 and 4 isoreticular compounds are observed, while n = 3 leads to new structures. Larger amounts of all compounds were obtained employing scale-up syntheses in a conventional oven as well as in a microwave

  13. Effects of carbon atom parity and alkyl side chain length on the crystallization and morphology of biscarbamates, a set of model compounds for polyurethanes.

    PubMed

    Khan, Mostofa Kamal; Sundararajan, Pudupadi R

    2011-07-14

    Solid state morphology and crystallization behavior of a homologous series of biscarbamate molecules having varying alkyl side chain lengths with different carbon atom parity were investigated. These are model compounds for polyurethanes. We synthesized a set of biscarbamates with double hydrogen bonding motifs separated by a (CH(2))(6) spacer and with alkyl side chains of various lengths ranging from C(3) to C(18) at the ends. Thermal analysis showed an odd-even alternation in their melting temperatures and heats of fusion, with the odd number of carbon atoms in the side chain having higher melting temperatures and heats of fusion than the even numbered ones, in contrast to the case of n-alkanes. The effect of carbon atom parity in the alkyl side chains on the spherulite size, spherulite growth rate, and isothermal crystallization kinetics was studied. Although the spherulite size increases with the alkyl side chain length, the maximum is seen at an intermediate length and not with a short or long alkyl chain for both the odd and even series. Along this series of molecules, a maximum in spherulite size, spherulite growth rate, and rate of crystallization is seen for C(7)C(6) (odd series) and C(8)C(6) (even series) biscarbamates. There is a significant difference in spherulite size with respect to carbon atom parity in the alkyl side chains as well as sample preparation protocol. Hence the length of the alkyl side chain, carbon atom parity in the alkyl side chains, and the sample preparation protocol (i.e., quenching versus slow cooling) play an important role in the morphology of these molecules. We rationalize this behavior with the relative contributions of hydrogen bonding and van der Waals forces as discerned from IR spectroscopy. While the van der Waals interaction increases with the alkyl side chain length in this series, the hydrogen bond contribution remains invariant. The rate of crystallization follows the trend seen with the spherulitic growth. The

  14. Structure-activity relationships of alkylxanthines: alkyl chain elongation at the N1- or N7-position decreases cardiotonic activity in the isolated guinea pig heart.

    PubMed

    Sanae, F; Ohmae, S; Kurita, M; Sawanishi, H; Takagi, K; Miyamoto, K

    1995-10-01

    Relationships between the alkyl substitutions (C1-C6) and cardiac inotropic activities of xanthine derivatives were studied in isolated guinea pig heart muscles. Most of the alkylxanthines exhibited positive inotropic activity on the left atrium, which was increased with an elongation of alkyl chain at the N3-position but decreased by substitution of a long alkyl group at the N1- or N7-position of the xanthine skeleton. Although positive inotropic activity in the right ventricular papillary muscle was also increased by longer alkyl groups at the N3-position, the inotropic activity became negative with an increment in alkyl chain length at the N1- or N7-position. The positive inotropic activity of alkylxanthines was correlated with their inhibitory activity on the phosphodiesterase (PDE) III isoenzyme. Adenosine A1 antagonism and PDE IV inhibitory activity were also partly associated with the inotropic activity because H-89, an inhibitor of cyclic AMP-dependent protein kinase, diminished the positive inotropic action and potentiated the negative inotropic action. These results indicate that the positive inotropic activity of alkylxanthines becomes weak with elongation of alkyl chains at the N1- and N7-positions; In particular, xanthines having two long alkyl chains show a negative inotropic activity on the right ventricular papillary muscle, an effect that could not be elucidated from their cyclic AMP-dependent action.

  15. Water-mediated recognition of simple alkyl chains by heart-type fatty-acid-binding protein.

    PubMed

    Matsuoka, Shigeru; Sugiyama, Shigeru; Matsuoka, Daisuke; Hirose, Mika; Lethu, Sébastien; Ano, Hikaru; Hara, Toshiaki; Ichihara, Osamu; Kimura, S Roy; Murakami, Satoshi; Ishida, Hanako; Mizohata, Eiichi; Inoue, Tsuyoshi; Murata, Michio

    2015-01-26

    Long-chain fatty acids (FAs) with low water solubility require fatty-acid-binding proteins (FABPs) to transport them from cytoplasm to the mitochondria for energy production. However, the precise mechanism by which these proteins recognize the various lengths of simple alkyl chains of FAs with similar high affinity remains unknown. To address this question, we employed a newly developed calorimetric method for comprehensively evaluating the affinity of FAs, sub-Angstrom X-ray crystallography to accurately determine their 3D structure, and energy calculations of the coexisting water molecules using the computer program WaterMap. Our results clearly showed that the heart-type FABP (FABP3) preferentially incorporates a U-shaped FA of C10-C18 using a lipid-compatible water cluster, and excludes longer FAs using a chain-length-limiting water cluster. These mechanisms could help us gain a general understanding of how proteins recognize diverse lipids with different chain lengths.

  16. Surface active molecules: preparation and properties of long chain n-acyl-l-alpha-amino-omega-guanidine alkyl acid derivatives.

    PubMed

    Infante, R; Dominguez, J G; Erra, P; Julia, R; Prats, M

    1984-12-01

    Synopsis A new route for the synthesis of long chain N(alpha)-acyl-l-alpha-amino-omega-guamdine alkyl acid derivatives, with cationic or amphoteric character has been established. The general formula of these compounds is shown below. A physico-chemical and antimicrobial study of these products as a function of the alkyl ester or sodium salt (R), the straight chain length of the fatty acid residue (x) and the number of carbons between the omega-guanidine and omega-carboxyl group (n) has been investigated. The water solubility, surface tension, critical micelle concentration (c.m.c.) and minimum inhibitory concentration (MIC) against Gram-positive and Gram-negative bacteria (including Pseudomonas) has been determined. Dicyclohexylcarbodiimide has been used to condense fatty acids and alpha-amino-omega-guanidine alkyl acids. In these conditions protection of the omega-guanidine group is not necessary. The main characteristic of this synthetic procedure is the use of very mild experimental conditions (temperature, pH) to form the amide linkage which leads to pure optical compounds in high yield in the absence of electrolytes. The results show that some structural modifications, particularly the protection of the carboxyl group, promote variations of the surfactant and antimicrobial properties. Only those molecules with the blocked carboxyl group (cationic molecules, where R = Me, Et or Pr) showed a good surfactant and antimicrobial activity. When the carboxyl group was unprotected (amphoteric molecules, where R = Na(+)) the resulting compounds were inactive.

  17. Synthesis and Photophysical Properties of Soluble Low-Bandgap Thienothiophene Polymers with Various Alkyl Side-Chain Lengths

    SciTech Connect

    Bae, W. J.; Scilla, C.; Duzhko, V. V.; Jo, Jang; Coughlin, E. B.

    2011-05-27

    We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2-alkylthieno[3,4-b]thiophene monomers (Ttx) have been synthesized in a two-step protocol in an overall yield of 28–37%. Poly(2-alkylthieno[3,4-b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx-G) have narrower molecular weight distribution (Ð) with lower molecular weight (Mn) than those synthesized by oxidative polymerization (PTtx-O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low-bandgap polymers are good candidates for organic transistors, organic light-emitting diodes, and organic photovoltaic cells.

  18. The transfection efficiency of calix[4]arene-based lipids: the role of the alkyl chain length.

    PubMed

    Mochizuki, Shinichi; Nishina, Koichi; Fujii, Shota; Sakurai, Kazuo

    2015-02-01

    The size, surface charge, and microstructure of lipoplexes comprising cationic lipids and nucleic acids are important factors for transfection efficiency. As these properties are largely determined by the cationic lipids used, a number of studies on the relationship between cationic lipids and the transfection efficiency have been reported. Among the many cationic lipids, lipids with multivalent cationic head groups are expected to be potent transfection reagents. Here, we prepared calix[4]arene-based lipids with different alkyl chain lengths from C3 to C15 and evaluated the relationship between the alkyl chain length and the transfection efficiency. C6 lipoplexes exhibited the highest transfection efficiency among all lipoplexes. The gene expression with C9 and C12 lipoplexes was slightly lower than that with C6 lipoplexes. C3 lipoplexes hardly induced gene expression, while C15 lipoplexes exhibited no complexation with plasmid DNA. Although all lipoplexes exhibited nearly identical characteristics, they exhibited different behaviours in terms of the interactions between the lipoplexes and anionic micelles comprising phosphatidylserine, a model of endosomal vehicle. After mixing with phosphatidylserine micelles, C6 lipoplexes released the bound plasmid DNA at pH 5 but not at pH 7, indicating that they can interact with the late endosomal membrane after being incorporated into cells. No plasmid DNA was released from C9 or C12 lipoplexes at either pH values. Thus, the alkyl chain length of cationic lipids is related to their interaction with the endosomal compartment and can provide a basis for the design of novel transfection reagents.

  19. Molecular structure of an alkyl-side-chain polymer-water interface: origins of contact angle hysteresis.

    PubMed

    Rangwalla, Hasnain; Schwab, Alexander D; Yurdumakan, Betül; Yablon, Dalia G; Yeganeh, Mohsen S; Dhinojwala, Ali

    2004-09-28

    A new and direct approach to verify surface heterogeneity as the microscopic origin of contact-angle hysteresis is demonstrated. IR-visible sum-frequency-generation spectroscopy (SFG) was used to selectively probe the molecules at the interface of an alkyl-side-chain polymer [poly(vinyl n-octadecyl carbamate-co-vinyl acetate)] with water. The spectra indicate that in contact with water, the polymer surface is heterogeneous (having areas of differing surface energies). This evidence of surface heterogeneity supports the hysteresis observed in the advancing and receding contact angles of the polymer surface with water. The same measurements made for the chemically and structurally similar surface of an octadecyltrichlorosilane self-assembled monolayer indicates a homogeneous surface at the water interface. In this case, contact-angle hysteresis measurements implicate surface roughness as the cause of hysteresis. Atomic force microscopy measurements of roughness for these surfaces further support our conclusions. The polymer-water interface was probed using SFG at above-ambient temperatures, and an order-to-disorder transition (ODT) of alkyl side chains at the interface was observed, which closely follows the melting of crystalline side chains in the bulk. This transition explains the increased wettability of the polymer, by water, when the temperature is raised above the bulk melting temperature. Furthermore, the irreversibility of this ODT suggests that the disordered polymer-water interface is the thermodynamic equilibrium state, whereas the before-heating structure of this interface is a kinetically hindered metastable state.

  20. Self-Spreading of Lipid Bilayer on a Hydrophobic Surface Made by Self-Assembled Monolayer with Short Alkyl Chain.

    PubMed

    Omori, Yuya; Sakaue, Hiroyuki; Takahagi, Takayuki; Suzuki, Hitoshi

    2016-04-01

    Behaviors of self-spreading of lipid bilayer membrane on a glass surface modified with self-assembled monolayer (SAM) with short alkyl chain were observed with fluorescence microscopy. Hydrophobic surface made by SAM was found to hamper the self-spreading phenomenon but the lipid bilayer spread on a hydrophilic one where SAM was decomposed by oxidation. On a binary surface having a hydrophobic region and a hydrophilic one, the lipid bilayer spread on the hydrophilic region but it stopped at the boundary of the hydrophobic region.

  1. Microemulsion breakdown by pervaporation technique: effect of the alkyl chain length of n-alkanol, a cosurfactant of the microemulsion.

    PubMed

    Moulay, Saâd; Hadj-Ziane, Amel Zafour; Canselier, Jean-Paul

    2007-07-15

    Two sets of microemulsions, cyclohexane- and water-rich ones, were prepared with the following n-alkanols as cosurfactants: n-propanol, n-butanol, n-pentanol, and n-hexanol. The results showed the influence of the alkyl chain length of the n-alkanol on the permselectivity properties of the pervaporation technique in the breakdown of the microemulsions. The variations of the total flux rate J and the enrichment factor beta were in parallel with the effect of the cosurfactant on the swelling extent of the PDMS membrane.

  2. Fluoroalkyl and Alkyl Chains Have Similar Hydrophobicities in Binding to the “Hydrophobic Wall” of Carbonic Anhydrase

    PubMed Central

    Mecinović, Jasmin; Snyder, Phillip W.; Mirica, Katherine A.; Bai, Serena; Mack, Eric T.; Kwant, Richard L.; Moustakas, Demetri T.; Heroux, Annie; Whitesides, George M.

    2011-01-01

    The hydrophobic effect—the free-energetically favorable association of non-polar solutes in water—makes a dominant contribution to binding of many systems of ligands and proteins. The objective of this study was to examine the hydrophobic effect in biomolecular recognition using two chemically different, but structurally similar hydrophobic groups—aliphatic hydrocarbons and aliphatic fluorocarbons—and to determine whether the hydrophobicity of the two groups could be distinguished by thermodynamic and biostructural analysis. This paper uses isothermal titration calorimetry (ITC) to examine the thermodynamics of binding of benzenesulfonamides substituted in the para position with alkyl and fluoroalkyl chains (H2NSO2C6H4-CONHCH2(CX2)nCX3, n = 0–4, X = H, F) to human carbonic anhydrase II (HCA II). Both alkyl and fluoroalkyl substituents contribute favorably to the enthalpy and the entropy of binding; these contributions increase as the length of chain of the hydrophobic substituent increases. Crystallography of the protein-ligand complexes indicates that the benzenesulfonamide groups of all ligands examined bind with similar geometry, that the tail groups associate with the hydrophobic wall of HCA II (which is made up of the side chains of residues Phe131, Val135, Pro202, and Leu204), and that the structure of the protein is indistinguishable for all but one of the complexes (the longest member of the fluoroalkyl series). Analysis of the thermodynamics of binding as a function of structure is compatible with the hypothesis that hydrophobic binding of both alkyl and fluoroalkyl chains to hydrophobic surface of carbonic anhydrase is due primarily to the release of non-optimally hydrogen-bonded water molecules that hydrate the binding cavity (including the hydrophobic wall) of HCA II and to the release of water molecules that surround the hydrophobic chain of the ligands. This study defines the balance of enthalpic and entropic contributions to the hydrophobic

  3. Fluoroalkyl and Alkyl Chains Have Similar Hydrophobicities in Binding to the “Hydrophobic Wall” of Carbonic Anhydrase

    SciTech Connect

    J Mecinovic; P Snyder; K Mirica; S Bai; E Mack; R Kwant; D Moustakas; A Heroux; G Whitesides

    2011-12-31

    The hydrophobic effect, the free-energetically favorable association of nonpolar solutes in water, makes a dominant contribution to binding of many systems of ligands and proteins. The objective of this study was to examine the hydrophobic effect in biomolecular recognition using two chemically different but structurally similar hydrophobic groups, aliphatic hydrocarbons and aliphatic fluorocarbons, and to determine whether the hydrophobicity of the two groups could be distinguished by thermodynamic and biostructural analysis. This paper uses isothermal titration calorimetry (ITC) to examine the thermodynamics of binding of benzenesulfonamides substituted in the para position with alkyl and fluoroalkyl chains (H{sub 2}NSO{sub 2}C{sub 6}H{sub 4}-CONHCH{sub 2}(CX{sub 2}){sub n}CX{sub 3}, n = 0-4, X = H, F) to human carbonic anhydrase II (HCA II). Both alkyl and fluoroalkyl substituents contribute favorably to the enthalpy and the entropy of binding; these contributions increase as the length of chain of the hydrophobic substituent increases. Crystallography of the protein-ligand complexes indicates that the benzenesulfonamide groups of all ligands examined bind with similar geometry, that the tail groups associate with the hydrophobic wall of HCA II (which is made up of the side chains of residues Phe131, Val135, Pro202, and Leu204), and that the structure of the protein is indistinguishable for all but one of the complexes (the longest member of the fluoroalkyl series). Analysis of the thermodynamics of binding as a function of structure is compatible with the hypothesis that hydrophobic binding of both alkyl and fluoroalkyl chains to hydrophobic surface of carbonic anhydrase is due primarily to the release of nonoptimally hydrogen-bonded water molecules that hydrate the binding cavity (including the hydrophobic wall) of HCA II and to the release of water molecules that surround the hydrophobic chain of the ligands. This study defines the balance of enthalpic and

  4. The role of alkyl chain length of monothiol-terminated alkyl carboxylic acid in the synthesis, characterization, and application of gelatin-g-poly(N-isopropylacrylamide) carriers for antiglaucoma drug delivery.

    PubMed

    Luo, Li-Jyuan; Lai, Jui-Yang

    2017-02-01

    To improve ocular bioavailability and extend pharmacological response, this study aims to investigate the role of alkyl chain length of monothiol-terminated alkyl carboxylic acids in the synthesis, characterization, and application of gelatin-g-poly(N-isopropylacrylamide) (GN) biodegradable in situ gelling carriers for antiglaucoma drug delivery. In the presence of mercaptoacetic acid (MAA), mercaptopropionic acid (MPA), mercaptobutyric acid (MBA), or mercaptohexanoic acid (MHA) as a chain transfer agent, the carboxylic end-capped poly(N-isopropylacrylamide) samples were prepared by free radical polymerization technique. Our results showed that with increasing alkyl chain length, the hydrophobicity of thermo-responsive polymer segments significantly increased, mainly due to an increase in CH stretching frequencies. In addition, the greater hydrophobic association favored the decrease in both phase transition temperature and weight loss of GN copolymers, thereby accelerating their temperature-triggered gelation process and retarding the degradation progress under physiological conditions. The benefits from these features allowed the pilocarpine carriers to increase drug payload and extend drug release. Irrespective of carbon number of monothiol-terminated alkyl carboxylic acid, the synthesized GN materials exhibited high tolerance to corneal endothelial cells without any evidence of inhibited proliferation, viability loss, inflammatory stimulation, and functional abnormality, indicating good biocompatibility. Results of clinical observations and histological examinations demonstrated that the therapeutic efficacies in treating glaucomatous damage are in response to in vivo drug release profiles from various intracamerally injected GN carriers. The research findings suggest the influence of alkyl chain length of chain transfer agent-mediated polymer hydrophobicity and degradability on pharmacological bioavailability and action of pilocarpine in a glaucomatous rabbit

  5. Comparative study of the intermolecular dynamics of imidazolium-based ionic liquids with linear and branched alkyl chains: OHD-RIKES measurements.

    PubMed

    Xue, Lianjie; Bardak, Fehmi; Tamas, George; Quitevis, Edward L

    2017-02-08

    This article describes a comparative study of the low-frequency (0-450 cm(-1)) Kerr spectra of the branched 1-(iso-alkyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([(N - 2)mCN-1C1im][NTf2] with N = 3-7) ionic liquids (ILs) and that of the linear 1-(n-alkyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([CNC1im][NTf2] with N = 2-7) ILs. The spectra were obtained by use of femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The intermolecular spectrum of a branched IL is similar to that of a linear IL that is of the same alkyl chain length rather than of the same number of carbon atoms in the alkyl chain. This similarity and the lack of a correlation of the first spectral moments and widths of the intermolecular spectra with chain length is mainly attributed to the increase in the dispersion contribution to the total molar cohesive energy being compensated by stretching of the ionic network due to the increasing size of the nonpolar domains, which is dependent only on the length of the alkyl chain.

  6. Solubility of n-butane and 2-methylpropane (isobutane) in 1-alkyl-3-methylimidazolium-based ionic liquids with linear and branched alkyl side-chains.

    PubMed

    Pison, Laure; Shimizu, Karina; Tamas, George; Lopes, José Nuno Canongia; Quitevis, Edward L; Gomes, Margarida F Costa

    2015-11-11

    The solubility of n-butane and 2-methylpropane (isobutane) in three ionic liquids - 1-(2-methylpropyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [(2mC3)C1im][Ntf2], 1-(3-methylbutyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [(3mC4)C1im][Ntf2] and 1-methyl-3-pentylimidazolium bis(trifluoromethylsulfonyl)imide [C5C1im][Ntf2] - has been measured at atmospheric pressure from 303 to 343 K. Isobutane is less soluble than n-butane in all the ionic liquids. Henry's constant values range from 13.8 × 10(5) Pa for n-butane in [C5C1im][Ntf2] at 303 K to 64.5 × 10(5) Pa for isobutane in [(2mC3)C1im][Ntf2] at 343 K. The difference in solubility between the two gases can be explained by a more negative enthalpy of solvation for n-butane. A structural analysis of the pure solvents and of the solutions of the gases, probed by molecular dynamics simulations, could explain the differences found in the systems: (i) the nonpolar domains of the ionic liquids accommodate better the long and more flexible n-butane solute; (ii) the small differences in solubility of each gas in the ionic liquids with the same number of carbon atoms in the alkyl side-chains are explained by the absence of large structural differences in the pure solvents. In all cases, the structural analysis of the four ionic liquids confirms that the studied gases can act as probes of the molecular structure of the ionic liquids, the simulations being always compatible with the experimental solubility data.

  7. Effect of fluorination and size of the alkyl side-chain on the solubility of carbon dioxide in 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquids.

    PubMed

    Almantariotis, D; Gefflaut, T; Pádua, A A H; Coxam, J-Y; Costa Gomes, M F

    2010-03-18

    It is proven in this work that it is possible to significantly increase the carbon dioxide uptake by an ionic liquid relying on physical interactions only. The solubility and thermodynamics of solvation of carbon dioxide in the ionic liquids 1-octyl-3-methylimidazolium bis[trifluoromethylsulfonyl]amide [C(8)mim][Ntf(2)], 1-decyl-3-methylimidazolium bis[trifluoromethylsulfonyl]amide [C(10)mim][Ntf(2)], and 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[trifluoromethylsulfonyl]amide [C(8)H(4)F(13)mim][Ntf(2)] were determined experimentally between 298 and 343 K at pressures close to atmospheric. The solubility of carbon dioxide is significantly higher in the fluorine-substituted ionic liquid with Henry's law constants at 303 K of 33.3 and 30.7 bar for [C(8)mim][Ntf(2)] and [C(10)mim][Ntf(2)], respectively, and of 28.0 bar for [C(8)H(4)F(13)mim][Ntf(2)]. Molecular simulation was used for interpreting the molecular mechanisms of solvation of carbon dioxide in the studied ionic liquids and coherent molecular mechanisms of solvation are proposed in light of the solute-solvent radial distribution functions. It is shown that the increase of the size of the hydrogenated or fluorinated alkyl chain in the imidazolium cation does not lead to a steady augmentation of the gaseous uptake by the liquid probably due to an increase of the nonpolar domains of the ionic liquid, carbon dioxide being solvated preferentially in the charged regions of the solvent.

  8. Designing greener plasticizers: Effects of alkyl chain length and branching on the biodegradation of maleate based plasticizers.

    PubMed

    Erythropel, Hanno C; Brown, Tobin; Maric, Milan; Nicell, Jim A; Cooper, David G; Leask, Richard L

    2015-09-01

    The ubiquitous presence of the plasticizer di (2-ethylhexyl) phthalate (DEHP) in the environment is of concern due to negative biological effects associated with it and its metabolites. In particular, the metabolite mono (2-ethylhexyl) phthalate (MEHP) is a potential endocrine disruptor. Earlier work had identified the diester di (2-ethylhexyl) maleate (DEHM) as a potential greener candidate plasticizer to replace DEHP, yet its biodegradation rate was reported to be slow. In this study, we modified the side chains of maleate diesters to be linear (i.e., unbranched) alkyl chains that varied in length from ethyl to n-octyl. The plasticization efficiency of these compounds blended into PVC at 29 wt.% increased with the overall length of the molecule, but all compounds performed as well as or better than comparable samples with DEHP. Tests conducted with the equally long DEHM and dihexyl maleate (DHM) showed that branching has no effect on glass transition temperature (Tg) reduction efficiency. Biodegradation experiments with the common soil bacterium Rhodococcus rhodocrous in the presence of the plasticizer showed acceptable hydrolysis rates of maleates with unbranched side chains, while the branched DEHM showed almost no degradation. The addition of hexadecane as auxiliary carbon source improved hydrolysis rates. Temporary buildup of the respective monoester of the compounds were observed, but only in the case of the longest molecule, dioctyl maleate (DOM), did this buildup lead to growth inhibition of the bacteria. Maleates with linear side chains, if designed and tested properly, show promise as potential candidate plasticizers as replacements for DEHP.

  9. Sequence-specific DNA alkylation and transcriptional inhibition by long-chain hairpin pyrrole-imidazole polyamide-chlorambucil conjugates targeting CAG/CTG trinucleotide repeats.

    PubMed

    Asamitsu, Sefan; Kawamoto, Yusuke; Hashiya, Fumitaka; Hashiya, Kaori; Yamamoto, Makoto; Kizaki, Seiichiro; Bando, Toshikazu; Sugiyama, Hiroshi

    2014-09-01

    Introducing novel building blocks to solid-phase peptide synthesis, we readily synthesized long-chain hairpin pyrrole-imidazole (PI) polyamide-chlorambucil conjugates 3 and 4 via the introduction of an amino group into a GABA (γ-turn) contained in 3, to target CAG/CTG repeat sequences, which are associated with various hereditary disorders. A high-resolution denaturing polyacrylamide sequencing gel revealed sequence-specific alkylation both strands at the N3 of adenines or guanines in CAG/CTG repeats by conjugates 3 and 4, with 11bp recognition. In vitro transcription assays using conjugate 4 revealed that specific alkylation inhibited the progression of RNA polymerase at the alkylating sites. Chiral substitution of the γ-turn with an amino group resulted in higher binding affinity observed in SPR assays. These assays suggest that conjugates 4 with 11bp recognition has the potential to cause specific DNA damage and transcriptional inhibition at the alkylating sites.

  10. Theoretical model to investigate the alkyl chain and anion dependent interactions of gemini surfactant with bovine serum albumin.

    PubMed

    Vishvakarma, Vijay K; Kumari, Kamlesh; Patel, Rajan; Dixit, V S; Singh, Prashant; Mehrotra, Gopal K; Chandra, Ramesh; Chakrawarty, Anand Kumar

    2015-05-15

    Surfactants are used to prevent the irreversible aggregation of partially refolded proteins and they also assist in protein refolding. We have reported the design and screening of gemini surfactant to stabilize bovine serum albumin (BSA) with the help of computational tool (iGEMDOCK). A series of gemini surfactant has been designed based on bis-N-alkyl nicotinate dianion via varying the alkyl group and anion. On changing the alkyl group and anion of the surfactant, the value of Log P changes means polarity of surfactant can be tuned. Further, the virtual screening of the gemini surfactant has been carried out based on generic evolutionary method. Herein, thermodynamic data was studied to determine the potential of gemini surfactant as BSA stabilizer. Computational tools help to find out the efficient gemini surfactant to stabilize the BSA rather than to use the surfactant randomly and directionless for the stabilization. It can be confirmed through the experimental techniques. Previously, researcher synthesized one of the designed and used gemini surfactant to stabilize the BSA and their interactions were confirmed through various techniques and computational docking. But herein, the authors find the most competent gemini surfactant to stabilize BSA using computational tools on the basis of energy score. Different from the single chain surfactant, the gemini surfactants exhibit much stronger electrostatic and hydrophobic interactions with the protein and are thus effective at much lower concentrations. Based on the present study, it is expected that gemini surfactants may prove useful in the protein stabilization operations and may thus be effectively employed to circumvent the problem of misfolding and aggregation.

  11. Impact of chain length on antibacterial activity and hemocompatibility of quaternary N-alkyl and n,n-dialkyl chitosan derivatives.

    PubMed

    Sahariah, Priyanka; Benediktssdóttir, Berglind E; Hjálmarsdóttir, Martha Á; Sigurjonsson, Olafur E; Sørensen, Kasper K; Thygesen, Mikkel B; Jensen, Knud J; Másson, Már

    2015-05-11

    A highly efficient method for chemical modification of chitosan biopolymers by reductive amination to yield N,N-dialkyl chitosan derivatives was developed. The use of 3,6-O-di-tert-butyldimethylsilylchitosan as a precursor enabled the first 100% disubstitution of the amino groups with long alkyl chains. The corresponding mono N-alkyl derivatives were also synthesized, and all the alkyl compounds were then quaternized using an optimized procedure. These well-defined derivatives were studied for antibacterial activity against Gram positive S. aureus, E. faecalis, and Gram negative E. coli, P. aeruginosa, which could be correlated to the length of the alkyl chain, but the order was dependent on the bacterial strain. Toxicity against human red blood cells and human epithelial Caco-2 cells was found to be proportional to the length of the alkyl chain. The most active chitosan derivatives were found to be more selective for killing bacteria than the quaternary ammonium disinfectants cetylpyridinium chloride and benzalkonium chloride, as well as the antimicrobial peptides melittin and LL-37.

  12. Calorimetric and spectroscopic evidence of chain-melting in smectic E and smectic A phases of 4-alkyl-4'-isothiocyanatobiphenyl (nTCB).

    PubMed

    Yamamura, Yasuhisa; Adachi, Takuya; Miyazawa, Takahito; Horiuchi, Katsuya; Sumita, Masato; Massalska-Arodź, Maria; Urban, Stanisław; Saito, Kazuya

    2012-08-02

    To confirm the molten state of the alkyl chain in soft crystalline phase, smectic E (SmE) phase, thermodynamic and spectroscopic analyses were performed on 4-n-alkyl-4'-isothiocyanatobiphenyl (nTCB, n: the number of carbon atoms in the alkyl group). DSC results of 11TCB and 12TCB, having extra smectic A phase besides smectic E phase, show that their chain-length dependence of entropies of transition (Δ(trs)S) from the ordered crystalline (OC) phase to the SmE phase matches the trend found for nTCB (n = 4-10), while no chain-length dependence is observed in Δ(trs)S at the SmE-to-SmA and SmA-to-isotropic liquid (IL) phase transitions in 11TCB and 12TCB. Temperature dependences of FT-IR spectra of six compounds (n = 2, 3, 5, 8, 10, and 12) were recorded. The CH stretching modes of the chain exhibited more pronounced change at the transition from the OC to the SmE phase than at the transition from the SmE phase to the IL or SmA phase. These results indicate that the alkyl chain is molten in the SmE phase as in IL. The disordering process of nTCB molecules from the OC to IL via anisotropic mesophases is discussed in terms of entropy.

  13. Graphene oxide derivatives with variable alkyl chain length and terminal functional groups as supports for stabilization of cytochrome c.

    PubMed

    Patila, Michaela; Pavlidis, Ioannis V; Kouloumpis, Antonios; Dimos, Konstantinos; Spyrou, Konstantinos; Katapodis, Petros; Gournis, Dimitrios; Stamatis, Haralambos

    2016-03-01

    In this study we report the ability of reduced and non-reduced graphene oxide-based nanomaterials (GONs), modified with variable alkyl chain length and terminal functional groups, to act as effective scaffolds for the immobilization of cytochrome c (cyt c) using different immobilization procedures. The GONs/cyt c conjugates are characterized by a combination of techniques, namely atomic force microscopy, X-ray photoelectron and FT-IR spectroscopies as well as thermo-gravimetric and differential thermal analysis. The effect of the structure of functional groups and the surface chemistry of GONs on the immobilization efficiency, the peroxidase activity and the stability of the cyt c was investigated and correlated with conformational changes on the protein molecule upon immobilization. The enhanced thermal stability (up to 2-fold) and increased tolerance (up to 25-fold) against denaturing agents observed for immobilized cyt c, indicates that these functionalized GONs are suitable as nanoscaffolds for the development of robust nanobiocatalysts.

  14. Designing green plasticizers: influence of alkyl chain length on biodegradation and plasticization properties of succinate based plasticizers.

    PubMed

    Erythropel, Hanno C; Dodd, Patrick; Leask, Richard L; Maric, Milan; Cooper, David G

    2013-04-01

    Phthalate diesters such as di (2-ethylhexyl) phthalate (DEHP) are considered ubiquitous contaminants and are poorly biodegraded in the environment. Moreover, both the parent compound and stable metabolites such as mono (2-ethylhexyl) phthalate (MEHP) are linked to several negative impacts on the environment and human health. Earlier work established that saturated diester compounds, such as succinates, showed better biodegradation characteristics and comparable plasticizer properties compared to DEHP. In this work we examine the effect of alkyl chain length of succinate molecules on plasticizer and biodegradation properties. This included both the side chains (n-ethyl to n-octyl) as well as substituents on the middle part of the succinate molecule. We showed that the common soil bacterium Rhodococcus rhodocrous could rapidly break down all unsubstituted succinates, without the appearance of stable metabolites. Furthermore, the organisms used the plasticizer metabolites as carbon source. The introduction of a large cyclohexyl substituent on the succinate resulted in a poorer degradation rate. Glass Transition Temperature (Tg) measurements were performed to evaluate plasticizer properties and showed that longer side chains reduced the Tg more efficiently, while large cyclohexyl substituents on the succinate decreased this effect. However, all compounds performed better or equal to DEHP at reducing the Tg.

  15. Rotational dynamics of coumarin-153 and 4-aminophthalimide in 1-ethyl-3-methylimidazolium alkylsulfate ionic liquids: effect of alkyl chain length on the rotational dynamics.

    PubMed

    Das, Sudhir Kumar; Sarkar, Moloy

    2012-01-12

    Rotational dynamics of two neutral organic solutes, coumarin-153 (C-153) and 4-aminophthalimide (AP), with only the latter having hydrogen-bond-donating ability, has been investigated in a series of 1-ethyl-3-methylimidazolium alkyl sulfate ionic liquids as a function of temperature. The ionic liquids differ only in the length of the linear alkyl side chain (alkyl = ethyl, butyl, hexyl, and octyl) on the anionic moiety. The present study has been undertaken to examine the role of alkyl side chains on the rotational dynamics of the two solutes in these ionic liquids. Analysis of the results using Stokes-Einstein-Debye hydrodynamic theory indicates that the rotational dynamics of C-153 lies between the stick and slip boundary condition in the ethyl analogue and finally reaches subslip condition as in case of the octyl substituent. The observed rotational behavior of C-153 has been explained on the basis of an increase in the size of the solvent, which offers lower friction for solute rotation. On the other hand, AP shows superstick behavior in the ethyl system and exceeds the stick limit in the octyl derivative. Superstick behavior of AP has been attributed to the specific hydrogen-bonding interaction between AP and the sulfate moiety. Proton NMR investigation confirms the hydrogen-bonding interaction between the N-H hydrogen of AP and the ionic liquid. The decrease in rotational coupling constant values for AP with increasing length of alkyl side chains has been attributed to the decrease in the solute-solvent-specific interaction with an increase in the alkyl side chain length on the sulfate moiety.

  16. Ultrafast charge-transfer reactions of indoline dyes with anchoring alkyl chains of varying length in mesoporous ZnO solar cells.

    PubMed

    Rohwer, Egmont; Minda, Iulia; Tauscher, Gabriele; Richter, Christoph; Miura, Hidetoshi; Schlettwein, Derck; Schwoerer, Heinrich

    2015-04-07

    Dye-sensitized solar cells based on a mesoporous ZnO substrate were sensitized with the indoline derivatives DN91, DN216 and DN285. The chromophore is the same for each of these dyes. They differ from each other in the length of an alkyl chain, which provides a second anchor to the ZnO surface and prolongs cell lifetime. Ultrafast transient absorption measurements reveal a correlation between the length of the alkyl chain and the fastest electron-injection process. The depopulation of the excited state and the associated emergence of the oxidized molecules are dominant spectral features in the transient absorption of the dyes with shorter alkyl chains. A slower picosecond-scale decay proceeds at constant rate for all three derivatives and is assigned to electron transfer into the trap states of ZnO. All assignments are in good agreement with a higher quantum efficiency of charge injection leading to higher short-circuit currents J(sc) for dyes with shorter alkyl chains.

  17. Probing the effects of the ester functional group, alkyl side chain length and anions on the bulk nanostructure of ionic liquids: a computational study.

    PubMed

    Fakhraee, Mostafa; Gholami, Mohammad Reza

    2016-04-14

    The effects of ester addition on nanostructural properties of biodegradable ILs composed of 1-alkoxycarbonyl-3-alkyl-imidazolium cations ([C1COOCnC1im](+), n = 1, 2, 4) combined with [Br](-), [NO3](-), [BF4](-), [PF6](-), [TfO](-), and [Tf2N](-) were explored by using the molecular dynamics (MD) simulations and quantum theory of atoms in molecules (QTAIM) analysis at 400 K. Various thermodynamic properties of these ILs were extensively computed in our earlier work (Ind. Eng. Chem. Res., 2015, 54, 11678-11700). Nano-scale segregation analysis demonstrates the formation of a small spherical island-like hydrocarbon within the continuous ionic domain for ILs with short alkyl side chain ([C1COOC1C1im]), and a sponge-like nanostructure for the compound with long alkyl side chain ([C1COOC4C1im]). Ester-functionalized ILs with ethyl side chain ([C1COOC2C1im]) are the turning point between two different morphologies. Non-polar channels were observed for [C1COOC4C1im] ILs composed of smaller anions such as [Br] and [NO3], whereas clustering organization was found for the other anions. Formation of the spherical micelle-like nanostructure was seen for lengthened cations. Finally, the incorporation of an ester group into the alkyl side chain of the cation leads to stronger segregation between charged and uncharged networks, which consequently increased the possibility of self-assembly and micelle formation.

  18. Fabrication and tribological properties of self-assembled monolayer of n-alkyltrimethoxysilane on silicon: Effect of SAM alkyl chain length

    NASA Astrophysics Data System (ADS)

    Huo, Lixia; Du, Pengcheng; Zhou, Hui; Zhang, Kaifeng; Liu, Peng

    2017-02-01

    It is well known that the self-assembled organic molecules on a solid surface exhibit the friction-reducing performance. However, the effect of the molecular size of the self-assembled organic molecules has not been established. In the present work, self-assembled monolayers (SAMs) of n-alkyltrimethoxysilanes with different alkyl chain lengths (C6, C12, or C18) were fabricated on silicon substrate. The water contact angles of the SAMs increased from 26.8° of the hydroxylated silicon substrate to near 60° after self-assembly. The atomic force microscopy (AFM) analysis results showed that the mean roughness (Ra) of the SAMs decreased with increasing the alkyl chain length. The tribological properties of the SAMs sliding against Al2O3 ball were evaluated on an UMT-2 tribometer, and the worn surfaces of the samples were analyzed by means of Nano Scratch Tester and surface profilometry. It was found that lowest friction coefficient and smallest width of wear were achieved with the SAMs of C12 alkyl chain (C12-SAM). The superior friction reduction and wear resistance of the SAMs in comparison with the bare silicon substrate are attributed to good adhesion of the self-assembled films to the substrate, especially the C12-SAM with desirable alkyl chain length.

  19. Theoretical investigation on the kinetics and mechanisms of hydroxyl radical-induced transformation of parabens and its consequences for toxicity: Influence of alkyl-chain length.

    PubMed

    Gao, Yanpeng; Ji, Yuemeng; Li, Guiying; An, Taicheng

    2016-03-15

    As emerging organic contaminants (EOCs), the ubiquitous presence of preservative parabens in water causes a serious environmental concern. Hydroxyl radical ((•)OH) is a strong oxidant that can degrade EOCs through photochemistry in surface water environments as well as in advanced oxidation processes (AOPs). To better understand the degradation mechanisms, kinetics, and products toxicity of the preservative parabens in aquatic environments and AOPs, the (•)OH-initiated degradation reactions of the four parabens were investigated systematically using a computational approach. The four studied parabens with increase of alkyl-chain length were methylparaben (MPB), ethylparaben (EPB), propylparaben (PPB), and dibutylparaben (BPB). Results showed that the four parabens can be initially attacked by (•)OH through (•)OH-addition and H-abstraction routes. The (•)OH-addition route was more important for the degradation of shorter alkyl-chain parabens like MPB and EPB, while the H-abstraction route was predominant for the degradation of parabens with longer alkyl-chain for example PPB and BPB. In assessing the aquatic toxicity of parabens and their degradation products using the model calculations, the products of the (•)OH-addition route were found to be more toxic to green algae than original parabens. Although all degradation products were less toxic to daphnia and fish than corresponding parental parabens, they could be still harmful to these aquatic organisms. Furthermore, as alkyl-chain length increased, the ecotoxicity of parabens and their degradation products was found to be also increased.

  20. Oligo(ethylene glycol)-incorporated hybrid linear alkyl side chains for n-channel polymer semiconductors and their effect on the thin-film crystalline structure.

    PubMed

    Kim, Ran; Kang, Boseok; Sin, Dong Hun; Choi, Hyun Ho; Kwon, Soon-Ki; Kim, Yun-Hi; Cho, Kilwon

    2015-01-28

    Oligo(ethylene glycol)-incorporated hybrid linear alkyl side chains, serving as solubilizing groups, are designed and introduced into naphthalene-diimide-based n-channel copolymers. The synthesized polymers exhibit unipolar n-type operation with an electron mobility of up to 1.64 cm(2) V(-1) s(-1), which demonstrates the usefulness of the hybrid side chains in polymer electronics applications.

  1. Cholesterol Analogs with Degradation-resistant Alkyl Side Chains Are Effective Mycobacterium tuberculosis Growth Inhibitors.

    PubMed

    Frank, Daniel J; Zhao, Yan; Wong, Siew Hoon; Basudhar, Debashree; De Voss, James J; Ortiz de Montellano, Paul R

    2016-04-01

    Cholest-4-en-3-one, whether added exogenously or generated intracellularly from cholesterol, inhibits the growth ofMycobacterium tuberculosiswhen CYP125A1 and CYP142A1, the cytochrome P450 enzymes that initiate degradation of the sterol side chain, are disabled. Here we demonstrate that a 16-hydroxy derivative of cholesterol, which was previously reported to inhibit growth ofM. tuberculosis, acts by preventing the oxidation of the sterol side chain even in the presence of the relevant cytochrome P450 enzymes. The finding that (25R)-cholest-5-en-3β,16β,26-triol (1) (and its 3-keto metabolite) inhibit growth suggests that cholesterol analogs with non-degradable side chains represent a novel class of anti-mycobacterial agents. In accord with this, two cholesterol analogs with truncated, fluorinated side chains have been synthesized and shown to similarly block the growth in culture ofM. tuberculosis.

  2. Cholesterol Analogs with Degradation-resistant Alkyl Side Chains Are Effective Mycobacterium tuberculosis Growth Inhibitors*

    PubMed Central

    Frank, Daniel J.; Zhao, Yan; Wong, Siew Hoon; Basudhar, Debashree; De Voss, James J.; Ortiz de Montellano, Paul R.

    2016-01-01

    Cholest-4-en-3-one, whether added exogenously or generated intracellularly from cholesterol, inhibits the growth of Mycobacterium tuberculosis when CYP125A1 and CYP142A1, the cytochrome P450 enzymes that initiate degradation of the sterol side chain, are disabled. Here we demonstrate that a 16-hydroxy derivative of cholesterol, which was previously reported to inhibit growth of M. tuberculosis, acts by preventing the oxidation of the sterol side chain even in the presence of the relevant cytochrome P450 enzymes. The finding that (25R)-cholest-5-en-3β,16β,26-triol (1) (and its 3-keto metabolite) inhibit growth suggests that cholesterol analogs with non-degradable side chains represent a novel class of anti-mycobacterial agents. In accord with this, two cholesterol analogs with truncated, fluorinated side chains have been synthesized and shown to similarly block the growth in culture of M. tuberculosis. PMID:26833565

  3. Polymer chain length effects on fibroblast attachment on nylon-3-modified surfaces.

    PubMed

    Liu, Runhui; Masters, Kristyn S; Gellman, Samuel H

    2012-04-09

    Nylon-3 polymers have a polyamide backbone reminiscent of that found in proteins (β- vs α-amino acid residues, respectively), which makes these materials interesting for biological applications. Because of the versatility of the ring-opening polymerization process and the variety of β-lactam starting materials available, the structure of nylon-3 copolymers is highly amenable to alteration. A previous study showed that relatively subtle changes in the structure or ratio of hydrophobic and cationic subunits that comprise these polymers can result in significant changes in the ability of nylon-3-bearing surfaces to support cell adhesion and spreading. In the present study, we have exploited the highly tailorable nature of these polymers to synthesize new versions possessing a wide range of chain lengths, with the intent of optimizing these materials for use as cell-supportive substrates. We find that longer nylon-3 chains lead to better fibroblast attachment on modified surfaces and that at the optimal chain lengths less hydrophobic subunits are superior. The best polymers we identified are comparable to an RGD-containing peptide in supporting fibroblast attachment. The results described here will help to focus future efforts aimed at refining nylon-3 copolymer substrates for specific tissue engineering applications.

  4. Applying Alkyl-Chain Surface Functionalizations in Mesoporous Inorganic Structures: Their Impact on Gas Flow and Selectivity Depending on Temperature.

    PubMed

    Besser, Benjamin; Ahmed, Atiq; Baune, Michael; Kroll, Stephen; Thöming, Jorg; Rezwan, Kurosch

    2016-10-12

    Porous inorganic capillary membranes are prepared to serve as model structures for the experimental investigation of the gas transport in functionalized mesopores. The porous structures possess a mean pore diameter of 23 nm which is slightly reduced to 20 nm after immobilizing C16-alkyl chains on the surface. Gas permeation measurements are performed at temperatures ranging from 0 to 80 °C using Ar, N2, and CO2. Nonfunctionalized structures feature a gas transport according to Knudsen diffusion with regard to gas flow and selectivity. After C16-functionalization, the gas flow is reduced by a factor of 10, and the ideal selectivities deviate from the Knudsen theory. CO2 adsorption measurements show a decrease in total amount of adsorbed gas and isosteric heat of adsorption. It is hypothesized that the immobilized C16-chains sterically influence the gas transport behavior without a contribution from adsorption effects. The reduced gas flow derives from an additional surface resistance caused by the C16-chains spacially limiting the adsorption and desorption directions for gas molecules propagating through the structure, resulting in longer diffusion paths. In agreement, the gas flow is found to correlate with the molecular diameter of the gas species (CO2 < Ar < N2) increasing the resistance for larger molecules. This affects the ideal selectivities with the relation [Formula: see text]. The influence on selectivity increases with increasing temperature which leads to the conclusion that the temperature induced movement of the C16-chains is responsible for the stronger interaction between gas molecules and surface functional groups.

  5. Dielectric relaxation of alkyl chains in graphite oxide and n-alkylammonium halides

    NASA Astrophysics Data System (ADS)

    Ai, Xiaoqian; Tian, Yuchen; Gu, Min; Yu, Ji; Tang, Tong B.

    2016-05-01

    The dynamic of n-alkylammonium halides and n-alkylammonium cations (n = 12, 14, 16, 18) intercalated in graphite oxide (GO) have been investigated with complex impedance spectroscopy. X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, elemental analysis and thermogravimetry served to characterize the materials. The intercalated alkylammonium cations distributes as monolayers (when n = 12, 14 or 16) or bilayers (when n = 18), with their long axis parallel to GO layers, and with cations of headgroups bonded ionically to C-O- groups of GO; backbones of the confined molecules remain free. All halides and intercalation compounds suffer dielectric loss at low temperature. Arrhenius plots of the thermal dependence of the loss peaks, which are asymmetric, produce apparent activation energies that rise with increasing n. Ngai's correlated-state model helps to correct for effects of dipole-dipole interaction, leading to virtually identical values for actual activation energy of 110 meV ± 5%; the values are also almost the same as the barrier energy for internal rotation in the alkyl macromolecule. We conclude that the relaxation of the alkylammonium cations arises not from C3 reorientation of the CH3 at its headgroup, but from small-angle wobbling around its major axis, an intrinsic motion.

  6. Effect of alkyl chain length and hydroxyl group functionalization on the surface properties of imidazolium ionic liquids.

    PubMed

    Pensado, Alfonso S; Costa Gomes, Margarida F; Canongia Lopes, José N; Malfreyt, Patrice; Pádua, Agílio A H

    2011-08-14

    Properties of the surface of ionic liquids, such as surface tension, ordering, and charge and density profiles, were studied using molecular simulation. Two types of modification in the molecular structure of imidazolium cations were studied: the length of the alkyl side chain and the presence of a polar hydroxyl group at the end of the side chain. Four ionic liquids were considered: 1-ethyl-3-methylimidazolium tetrafluoroborate, [C(2)C(1)im][BF(4)]; 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate, [C(2)OHC(1)im][BF(4)]; 1-octyl-3-methylimidazolium tetrafluoroborate, [C(8)C(1)im][BF(4)] and 1-(8-hydroxyoctyl)-3-methylimidazolium tetrafluoroborate, [C(8)OHC(1)im][BF(4)]. The surface tension was calculated using both mechanical and thermodynamic definitions, with consistent treatment of the long-range corrections. The simulations reproduce the available experimental values of surface tension with a maximum deviation of ±10%. This energetic characterization of the interface is completed by microscopic structural analysis of orientational ordering at the interface and density profiles along the direction normal to the interface. The presence of the hydroxyl group modifies the local structure at the interface, leading to a less organized liquid phase. The results allow us to relate the surface tension to the structural ordering at the liquid-vacuum interface.

  7. Effect of cation type, alkyl chain length, adsorbate size on adsorption kinetics and isotherms of bromide ionic liquids from aqueous solutions onto microporous fabric and granulated activated carbons.

    PubMed

    Hassan, Safia; Duclaux, Laurent; Lévêque, Jean-Marc; Reinert, Laurence; Farooq, Amjad; Yasin, Tariq

    2014-11-01

    The adsorption from aqueous solution of imidazolium, pyrrolidinium and pyridinium based bromide ionic liquids (ILs) having different alkyl chain lengths was investigated on two types of microporous activated carbons: a fabric and a granulated one, well characterized in terms of surface chemistry by "Boehm" titrations and pH of point of zero charge measurements and of porosity by N2 adsorption at 77 K and CO2 adsorption at 273 K. The influence of cation type, alkyl chain length and adsorbate size on the adsorption properties was analyzed by studying kinetics and isotherms of eight different ILs using conductivity measurements. Equilibrium studies were carried out at different temperatures in the range [25-55 °C]. The incorporation of ILs on the AC porosity was studied by N2 adsorption-desorption measurements at 77 K. The experimental adsorption isotherms data showed a good correlation with the Langmuir model. Thermodynamic studies indicated that the adsorption of ILs onto activated carbons was an exothermic process, and that the removal efficiency increased with increase in alkyl chain length, due to the increase in hydrophobicity of long chain ILs cations determined with the evolution of the calculated octanol-water constant (Kow). The negative values of free energies indicated that adsorption of ILs with long chain lengths having hydrophobic cations was more spontaneous at the investigated temperatures.

  8. Impact of Alkyl Chain Length on the Transition of Hexagonal Liquid Crystal-Wormlike Micelle-Gel in Ionic Liquid-Type Surfactant Aqueous Solutions without Any Additive.

    PubMed

    Hu, Yimin; Han, Jie; Ge, Lingling; Guo, Rong

    2015-11-24

    The search for functional supramolecular aggregations with different structure has attracted interest of chemists because they have the potential in industrial and technological application. Hydrophobic interaction has great influence on the formation of these aggregations, such as hexagonal liquid crystals, wormlike micelles, hydrogels, etc. So a systematical investigation was done to investigate the influence of alkyl chain length of surfactants on the aggregation behavior in water. The aggregation behavior of 1-hexadecyl-3-alkyl imidazolium bromide and water has been systematically investigated. These ionic liquid surfactants are denoted as C16-Cn (n = 2, 3, 4, 6, 8, 9, 10, 12, 14, 16). The rheological behavior and microstructure were characterized via a combination of rheology, cryo-etch scanning electron microscopy, polarization optical microscopy, and X-ray crystallography. The alkyl chain has great influence on the formation of surfactant aggregates in water at the molecular level. With increasing alkyl chain length, different aggregates, such as hexagonal liquid crystals, wormlike micelles, and hydrogels can be fabricated: C16-C2 aqueous solution only forms hexagonal liquid crystal; C16-C3 aqueous solution forms wormlike micelle and hexagonal liquid crystal; C16-C4, C16-C6 and C16-C8 aqueous solutions only form wormlike micelle; C16-C9 aqueous solution experiences a transition between wormlike micelle and hydrogel; C16-C10, C16-C12, C16-C14 and C16-C16 only form hydrogel. The mechanism of the transition of different aggregation with increasing alkyl chain length was also proposed.

  9. Physicochemical and tribophysical properties of trioctylalkylammonium bis(salicylato)borate (N888n-BScB) ionic liquids: effect of alkyl chain length.

    PubMed

    Gusain, Rashi; Bakshi, Paramjeet S; Panda, Somenath; Sharma, Om P; Gardas, Ramesh; Khatri, Om P

    2017-03-01

    The alkyl chain length of trioctylalkylammonium bis(salicylato)borates (N888n-BScB; n = 6, 8, 10 and 12) was varied to prepare a series of room-temperature ionic liquids, and then their viscosity and rheological properties were investigated. Besides the omnipresent Coulombic interactions, other interactive forces such as van der Waals interactions, hydrogen bonding, inductive forces, dipole-dipole interactions, etc., collectively determine the physicochemical properties of N888n-BScB ionic liquids. The van der Waals interactions and structural geometry of the ammonium cation (N888n) primarily organized the packing orientation of N888n-BScB ionic liquids and controlled their viscosity and rheological properties as a function of the alkyl chain length. The symmetric cation (N8888) increased the viscosity owing to closer packing driven by van der Waals interactions. The N888n-BScB ionic liquids exhibited non-Newtonian shear thinning behaviour. Furthermore, the decrease in viscosity at higher shear rates indicated that interactive forces in the N888n-BScB ionic liquids were disrupted. These ionic liquids, as lubricants, exhibited significantly lower friction (40-50%) and wear (45-69%) in comparison to PEG 300 synthetic lubricating oil. The degrees of reduction in friction and wear were largely influenced by the chain length of the alkyl group. The N888n-BScB ionic liquids with longer alkyl chains were strongly adsorbed on sliding surfaces and provided better lubrication properties than those with shorter alkyl chains. As a result, the coefficients of friction and wear were decreased by increasing the chain length in N888n-BScB ionic liquids. The tribologically induced adsorption of the BScB anion on metal surfaces, electrostatic interactions between ions, the compact and rigid structure of the BScB anion and van der Waals interactions provided by longer alkyl chains in the N888n cation collectively formed a tribochemical thin film of low shear strength, which resulted

  10. Long-Chain Alkyl Cyanides: Unprecedented Volatile Compounds Released by Pseudomonas and Micromonospora Bacteria.

    PubMed

    Montes Vidal, Diogo; von Rymon-Lipinski, Anna-Lena; Ravella, Srinivasa; Groenhagen, Ulrike; Herrmann, Jennifer; Zaburannyi, Nestor; Zarbin, Paulo H G; Varadarajan, Adithi R; Ahrens, Christian H; Weisskopf, Laure; Müller, Rolf; Schulz, Stefan

    2017-03-09

    The analysis of volatiles from bacterial cultures revealed long-chain aliphatic nitriles, a new class of natural products. Such nitriles are produced by both Gram-positive Micromonospora echinospora and Gram-negative Pseudomonas veronii bacteria, although the structures differ. A variable sequence of chain elongation and dehydration in the fatty acid biosynthesis leads to either unbranched saturated or unsaturated nitriles with an ω-7 double bond, such as (Z)-11-octadecenenitrile, or methyl-branched unsaturated nitriles with the double bond located at C-3, such as (Z)-13-methyltetradec-3-enenitrile. The nitrile biosynthesis starts from fatty acids, which are converted into their amides and finally dehydrated. The structures and biosyntheses of the 19 naturally occurring compounds were elucidated by mass spectrometry, synthesis, and feeding experiments with deuterium-labeled precursors. Some of the nitriles showed antimicrobial activity, for example, against multiresistant Staphylococcus aureus strains.

  11. Enhanced production of short-chain fatty acid from food waste stimulated by alkyl polyglycosides and its mechanism.

    PubMed

    Zhao, Jianwei; Yang, Qi; Li, Xiaoming; Wang, Dongbo; Luo, Kun; Zhong, Yu; Xu, Qiuxiang; Zeng, Guangming

    2015-12-01

    Short-chain fatty acids (SCFAs) are the valuable products derived from the anaerobic fermentation of organic solid waste. However, SCFAs yield was limited by the worse solubilization and hydrolysis of particulate organic matter, and rapid consumption of organic acid by methanogens. In this study, an efficient and green strategy, i.e. adding biosurfactant alkyl polyglycosides (APG) into anaerobic fermentation system, was applied to enhance SCFAs production from food waste. Experimental results showed that APG not only greatly improved SCFAs production but also shortened the fermentation time for the maximum SCFAs accumulation. The SCFAs yield at optimal APG dosage 0.2g/g TS (total solid) reached 37.2g/L, which was 3.1-fold of that in blank. Meanwhile, the time to accumulate the maximum SCFAs in the presence of APG was shortened from day 14 to day 6. The activities of key enzymes such as hydrolytic and acid-forming enzymes were greatly promoted due to the presence of APG. These results demonstrated that the enhanced mechanism of SCFAs production should be attributed to the acceleration of solubilization and hydrolysis, enhancement of acidification and inhibition of methanogenesis by APG.

  12. Effects of odd-even side chain length of alkyl-substituted diphenylbithiophenes on first monolayer thin film packing structure.

    PubMed

    Akkerman, Hylke B; Mannsfeld, Stefan C B; Kaushik, Ananth P; Verploegen, Eric; Burnier, Luc; Zoombelt, Arjan P; Saathoff, Jonathan D; Hong, Sanghyun; Atahan-Evrenk, Sule; Liu, Xueliang; Aspuru-Guzik, Alán; Toney, Michael F; Clancy, Paulette; Bao, Zhenan

    2013-07-31

    Because of their preferential two-dimensional layer-by-layer growth in thin films, 5,5'bis(4-alkylphenyl)-2,2'-bithiophenes (P2TPs) are model compounds for studying the effects of systematic chemical structure variations on thin-film structure and morphology, which in turn, impact the charge transport in organic field-effect transistors. For the first time, we observed, by grazing incidence X-ray diffraction (GIXD), a strong change in molecular tilt angle in a monolayer of P2TP, depending on whether the alkyl chain on the P2TP molecules was of odd or even length. The monolayers were deposited on densely packed ultrasmooth self-assembled alkane silane modified SiO2 surfaces. Our work shows that a subtle change in molecular structure can have a significant impact on the molecular packing structure in thin film, which in turn, will have a strong impact on charge transport of organic semiconductors. This was verified by quantum-chemical calculations that predict a corresponding odd-even effect in the strength of the intermolecular electronic coupling.

  13. Interaction and dynamics of (alkylamide + electrolyte) deep eutectics: dependence on alkyl chain-length, temperature, and anion identity.

    PubMed

    Guchhait, Biswajit; Das, Suman; Daschakraborty, Snehasis; Biswas, Ranjit

    2014-03-14

    Here we investigate the solute-medium interaction and solute-centered dynamics in (RCONH2 + LiX) deep eutectics (DEs) via carrying out time-resolved fluorescence measurements and all-atom molecular dynamics simulations at various temperatures. Alkylamides (RCONH2) considered are acetamide (CH3CONH2), propionamide (CH3CH2CONH2), and butyramide (CH3CH2CH2CONH2); the electrolytes (LiX) are lithium perchlorate (LiClO4), lithium bromide (LiBr), and lithium nitrate (LiNO3). Differential scanning calorimetric measurements reveal glass transition temperatures (T(g)) of these DEs are ~195 K and show a very weak dependence on alkyl chain-length and electrolyte identity. Time-resolved and steady state fluorescence measurements with these DEs have been carried out at six-to-nine different temperatures that are ~100-150 K above their individual T(g)s. Four different solute probes providing a good spread of fluorescence lifetimes have been employed in steady state measurements, revealing strong excitation wavelength dependence of probe fluorescence emission peak frequencies. Extent of this dependence, which shows sensitivity to anion identity, has been found to increase with increase of amide chain-length and decrease of probe lifetime. Time-resolved measurements reveal strong fractional power dependence of average rates for solute solvation and rotation with fraction power being relatively smaller (stronger viscosity decoupling) for DEs containing longer amide and larger (weaker decoupling) for DEs containing perchlorate anion. Representative all-atom molecular dynamics simulations of (CH3CONH2 + LiX) DEs at different temperatures reveal strongly stretched exponential relaxation of wavevector dependent acetamide self dynamic structure factor with time constants dependent both on ion identity and temperature, providing justification for explaining the fluorescence results in terms of temporal heterogeneity and amide clustering in these multi-component melts.

  14. Alkyl group as entropy reservoir in an MMX chain complex, Pt2(n-PenCS2)4I.

    PubMed

    Saito, Kazuya; Ikeuchi, Satoaki; Nakazawa, Yasuhiro; Sato, Akane; Mitsumi, Minoru; Yamashita, Takami; Toriumi, Koshiro; Sorai, Michio

    2005-02-24

    Heat capacity of halogen-bridged one-dimensional binuclear metal complex (so-called MMX chain) having four n-pentyl groups, Pt2(n-PenCS2)4I, was measured by adiabatic calorimetry. A first-order phase transition was observed at 207.4 K when measurement was made after cooling from room temperature. The enthalpy and entropy of transition were determined to be 10.19 kJ mol(-1) and 49.1 J K(-1) mol(-1), respectively. A monotropic phase transition was observed at 324 K on heating, and the entropy of transition was essentially null. The sample once heated above 324 K never returned to the initial phase at room temperature and underwent a higher-order phase transition at 173 K and a first-order phase transition at 220.5 K. The enthalpy and entropy of the first-order phase transition were estimated to be 11.6 kJ mol(-1) and 52.4 J K(-1) mol(-1), respectively. The magnitude of the entropy gain at the phase transition from the initial room-temperature phase to the high-temperature phase at 324 K shows that in Pt2(n-PenCS2)4I a large amount of entropy reserved in alkyl chain is transferred to dithiocarboxylato groups upon the phase transition, as in the cases of Pt2(n-PrCS2)4I and Pt2(n-BuCS2)4I.

  15. Infrared Spectroscopy of Ionic Liquids Consisting of Imidazolium Cations with Different Alkyl Chain Lengths and Various Halogen or Molecular Anions with and Without a Small Amount of Water.

    PubMed

    Yamada, Toshiki; Tominari, Yukihiro; Tanaka, Shukichi; Mizuno, Maya

    2017-03-27

    Infrared spectroscopy was performed on ionic liquids (ILs) that had imidazolium cations with different alkyl chain lengths and various halogen or molecular anions with and without a small amount of water. The molar concentration normalized absorbance due to +C-H vibrational modes in the range of 3000 to 3200 cm-1 was nearly identical for ILs that had imidazolium cations with different alkyl chain lengths and the same anions. A close correlation was found between the red-shifted +C-H vibrational modes, the chemical shift of +C(2)-H proton, and the energy stabilization of hydrogen-bonding interaction. The vibrational modes of the water molecules interacting with anions in the range between 3300 and 3800 cm-1 was examined. The correlation between the vibrational frequencies of water, the frequencies of +C-H vibrational modes, and the center frequency of intermolecular vibrational modes due to ion pairs was discussed.

  16. Cu sbnd Al sbnd Fe layered double hydroxides with CO32- and anionic surfactants with different alkyl chains in the interlayer

    NASA Astrophysics Data System (ADS)

    Trujillano, Raquel; Holgado, María Jesús; González, José Luis; Rives, Vicente

    2005-08-01

    Layered double hydroxides (LDHs), with the hydrotalcite-like structure containing Cu(II), Al(III) and Fe(III) in the layers, and different alkyl sulfonates in the interlayer, have been prepared and characterized by powder X-ray diffraction, FT-IR spectroscopy, differential thermal analysis and thermogravimetric analysis. Pure crystalline phases have been obtained in all cases. Upon heating, combustion of the organic chain takes place at lower temperature than the corresponding sodium salts.

  17. Investigation of double bond conversion, mechanical properties, and antibacterial activity of dental resins with different alkyl chain length quaternary ammonium methacrylate monomers (QAM).

    PubMed

    He, Jingwei; Söderling, Eva; Vallittu, Pekka K; Lassila, Lippo V J

    2013-01-01

    In order to endow dental resin with antibacterial activity, a series of antibacterial quaternary ammonium methacrylate monomers (QAM) with different substituted alkyl chain length (from 10 to 18) were incorporated into commonly used 2,2-bis[4-(2'-hydroxy-3'-methacryloyloxy-propoxy)-phenyl]propane (Bis-GMA)/triethyleneglycol dimethacrylate (TEGDMA) (50 wt/50 wt) dental resin as immobilized antibacterial agents. Double bond conversion (DC), flexural strength (FS) and modulus (FM), and young and mature biofilms inhibition effectiveness of prepared dental resins were studied and Bis-GMA/TEGDMA without QAM was used as reference. Results showed that there was no significant difference on DC, FS, and FM between copolymer with and without 5 wt% QAM. Substituted alkyl chain length of QAM had no influence on DC, FS, and FM of copolymer, but had influence on antibacterial activity of copolymer. Antibacterial activity of copolymer increased with increasing of substituted alkyl chain length of QAM, and the sequence followed as 5%C10 < 5%C11 ≈ 5%C12 < 5%C16 ≈ 5%C18. Copolymers containing C18 and C16 had the best inhibition effectiveness on both young biofilm and mature biofilm, copolymers containing C12 and C11 only had inhibition effectiveness on young biofilm and copolymer containing C10 had none inhibition effectiveness on neither young biofilm nor mature biofilm.

  18. Prediction and determination of the stereochemistry of the 1,3,5-trimethyl-substituted alkyl chain in verucopeptin, a microbial metabolite.

    PubMed

    Yoshimura, Aya; Kishimoto, Shinji; Nishimura, Shinichi; Otsuka, Saori; Sakai, Yuki; Hattori, Akira; Kakeya, Hideaki

    2014-08-01

    For the prediction of the relative stereochemistry of 1,3-dimethyl substitution in alkyl chains, a simple approach based on (1)H NMR data was recently proposed; Δδ values of methylene protons located between methyl-substituted methine carbons can be diagnostic for predicting it. Here we applied this empirical "geminal proton rule" to verucopeptin, a lipopeptide from Streptomyces sp. To determine the absolute stereochemistry of the 1,3,5-trimethyl-substituted alkyl chain in verucopeptin, we converted the corresponding alkyl chain to a carboxylic acid by oxidative cleavage. The geminal proton rule clearly predicted the relative stereochemistry as 31S*,33S*,35R*. This prediction was definitely confirmed by synthesizing four possible diastereomers and comparing their NMR spectra. Furthermore, we reinvestigated the geminal proton rule using reported compounds and our synthesized compounds. Our result strongly suggests that the rule was solid, at least for predicting the stereochemistry of 2,4-dimethylated and 2,4,6-trimethylated fatty acids.

  19. Diacyltransferase Activity and Chain Length Specificity of Mycobacterium tuberculosis PapA5 in the Synthesis of Alkyl β-Diol Lipids

    SciTech Connect

    Touchette, Megan H.; Bommineni, Gopal R.; Delle Bovi, Richard J.; Gadbery, John; Nicora, Carrie D.; Shukla, Anil K.; Kyle, Jennifer E.; Metz, Thomas O.; Martin, Dwight W.; Sampson, Nicole S.; Miller, W. T.; Tonge, Peter J.; Seeliger, Jessica C.

    2015-09-08

    Although classified as Gram-positive bacteria, Corynebacterineae possess an asymmetric outer membrane that imparts structural and thereby physiological similarity to more distantly related Gram-negative bacteria. Like lipopolysaccharide in Gram-negative bacteria, lipids in the outer membrane of Corynebacterineae have been associated with the virulence of pathogenic species such as Mycobacterium tuberculosis (Mtb). For example, Mtb strains that lack long, branched-chain alkyl esters known as dimycocerosates (DIMs) are significantly attenuated in model infections. The resultant interest in the biosynthetic pathway of these unusual virulence factors has led to the elucidation of many of the steps leading to the final esterification of the alkyl beta-diol, phthiocerol, with branched-chain fatty acids know as mycocerosates. PapA5 is an acyltransferase implicated in these final reactions. We here show that PapA5 is indeed the terminal enzyme in DIM biosynthesis by demonstrating its dual esterification activity and chain-length preference using synthetic alkyl beta-diol substrate analogues. Applying these analogues to a series of PapA5 mutants, we also revise a model for the substrate binding within PapA5. Finally, we demonstrate that the Mtb Ser/Thr kinase PknB modifies PapA5 on three Thr residues, including two (T196, T198) located on an unresolved loop. These results clarify the DIM biosynthetic pathway and suggest possible mechanisms by which DIM biosynthesis may be regulated by the post-translational modification of PapA5.

  20. Alkyl-π engineering in state control toward versatile optoelectronic soft materials

    PubMed Central

    Lu, Fengniu; Nakanishi, Takashi

    2015-01-01

    Organic π-conjugated molecules with extremely rich and tailorable electronic and optical properties are frequently utilized for the fabrication of optoelectronic devices. To achieve high solubility for facile solution processing and desirable softness for flexible device fabrication, the rigid π units were in most cases attached by alkyl chains through chemical modification. Considerable numbers of alkylated-π molecular systems with versatile applications have been reported. However, a profound understanding of the molecular state control through proper alkyl chain substitution is still highly demanded because effective applications of these molecules are closely related to their physical states. To explore the underlying rule, we review a large number of alkylated-π molecules with emphasis on the interplay of van der Waals interactions (vdW) of the alkyl chains and π–π interactions of the π moieties. Based on our comprehensive investigations of the two interactions’ impacts on the physical states of the molecules, a clear guidance for state control by alkyl-π engineering is proposed. Specifically, either with proper alkyl chain substitution or favorable additives, the vdW and π–π interactions can be adjusted, resulting in modulation of the physical states and optoelectronic properties of the molecules. We believe the strategy summarized here will significantly benefit the alkyl-π chemistry toward wide-spread applications in optoelectronic devices. PMID:27877748

  1. Bis(thienothiophenyl) diketopyrrolopyrrole-based conjugated polymers with various branched alkyl side chains and their applications in thin-film transistors and polymer solar cells.

    PubMed

    Shin, Jicheol; Park, Gi Eun; Lee, Dae Hee; Um, Hyun Ah; Lee, Tae Wan; Cho, Min Ju; Choi, Dong Hoon

    2015-02-11

    New thienothiophene-flanked diketopyrrolopyrrole and thiophene-containing π-extended conjugated polymers with various branched alkyl side-chains were successfully synthesized. 2-Octyldodecyl, 2-decyltetradecyl, 2-tetradecylhexadecyl, 2-hexadecyloctadecyl, and 2-octadecyldocosyl groups were selected as the side-chain moieties and were anchored to the N-positions of the thienothiophene-flanked diketopyrrolopyrrole unit. All five polymers were found to be soluble owing to the bulkiness of the side chains. The thin-film transistor based on the 2-tetradecylhexadecyl-substituted polymer showed the highest hole mobility of 1.92 cm2 V(-1) s(-1) due to it having the smallest π-π stacking distance between the polymer chains, which was determined by grazing incidence X-ray diffraction. Bulk heterojunction polymer solar cells incorporating [6,6]-phenyl-C71-butyric acid methyl ester as the n-type molecule and the additive 1,8-diiodooctane (1 vol %) were also constructed from the synthesized polymers without thermal annealing; the device containing the 2-octyldodecyl-substituted polymer exhibited the highest power conversion efficiency of 5.8%. Although all the polymers showed similar physical properties, their device performance was clearly influenced by the sizes of the branched alkyl side-chain groups.

  2. Interaction and dynamics of (alkylamide + electrolyte) deep eutectics: Dependence on alkyl chain-length, temperature, and anion identity

    SciTech Connect

    Guchhait, Biswajit; Das, Suman; Daschakraborty, Snehasis; Biswas, Ranjit

    2014-03-14

    Here we investigate the solute-medium interaction and solute-centered dynamics in (RCONH{sub 2} + LiX) deep eutectics (DEs) via carrying out time-resolved fluorescence measurements and all-atom molecular dynamics simulations at various temperatures. Alkylamides (RCONH{sub 2}) considered are acetamide (CH{sub 3}CONH{sub 2}), propionamide (CH{sub 3}CH{sub 2}CONH{sub 2}), and butyramide (CH{sub 3}CH{sub 2}CH{sub 2}CONH{sub 2}); the electrolytes (LiX) are lithium perchlorate (LiClO{sub 4}), lithium bromide (LiBr), and lithium nitrate (LiNO{sub 3}). Differential scanning calorimetric measurements reveal glass transition temperatures (T{sub g}) of these DEs are ∼195 K and show a very weak dependence on alkyl chain-length and electrolyte identity. Time-resolved and steady state fluorescence measurements with these DEs have been carried out at six-to-nine different temperatures that are ∼100–150 K above their individual T{sub g}s. Four different solute probes providing a good spread of fluorescence lifetimes have been employed in steady state measurements, revealing strong excitation wavelength dependence of probe fluorescence emission peak frequencies. Extent of this dependence, which shows sensitivity to anion identity, has been found to increase with increase of amide chain-length and decrease of probe lifetime. Time-resolved measurements reveal strong fractional power dependence of average rates for solute solvation and rotation with fraction power being relatively smaller (stronger viscosity decoupling) for DEs containing longer amide and larger (weaker decoupling) for DEs containing perchlorate anion. Representative all-atom molecular dynamics simulations of (CH{sub 3}CONH{sub 2} + LiX) DEs at different temperatures reveal strongly stretched exponential relaxation of wavevector dependent acetamide self dynamic structure factor with time constants dependent both on ion identity and temperature, providing justification for explaining the fluorescence results in

  3. The acute toxic effects of imidazolium-based ionic liquids with different alkyl-chain lengths and anions on zebrafish (Danio rerio).

    PubMed

    Zhang, Cheng; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Zhou, Tongtong; Xu, Yaqi; Cheng, Chao

    2017-06-01

    With the increasing applications of ionic liquids (ILs), the toxicity of ILs has drawn increasing attention in recent years, especially the influences of different anions and alkyl-chain lengths on the acute toxicity to aquatic organisms. We performed a study on the acute toxicity of 1-alkyl-3-methylimidazolium nitrate ([Cnmim]NO3 (n=2, 4, 6, 8, 10, 12)), 1-hexyl-3-methylimidazolium ILs ([C6mim]R (R=Cl(-), Br(-), BF4(-), PF6(-))) to zebrafish (Danio rerio). We also evaluated the sensibility of the investigated animals and the stability of ILs in water via high performance liquid chromatography (HPLC, Agilent 1260, Agilent Technologies Inc., USA) to prove the reliability of the present study. The results illustrated that the test zebrafish (Danio rerio) were sensitive to the reference toxicant and that the investigated ILs in water were stable. The 50% lethal concentration (LC50) was used to represent the acute toxicity to zebrafish (Danio rerio). The present study showed that the highest toxic IL is [C12mim]NO3 and the lowest toxic IL is [C2mim]NO3 on Danio rerio. The LC50s for ILs with different anions had similar values. Accordingly, we believe that ILs with different alkyl-chain lengths cause greater effects than other anions on acute toxicity to aquatic organisms. Furthermore, the present study can also provide scientific methods for future studies to select and assess ILs.

  4. Expression of the (recombinant) endogenous immunoglobulin heavy-chain locus requires the intronic matrix attachment regions.

    PubMed Central

    Oancea, A E; Berru, M; Shulman, M J

    1997-01-01

    The elements which regulate gene expression have traditionally been identified by their effects on reporter genes which have been transfected into cell lines or animals. It is generally assumed that these elements have a comparable role in expression of the corresponding endogenous locus. Nevertheless, several studies of immunoglobulin heavy-chain (IgH) gene expression have reported that the requirements for expressing IgH-derived transgenes differ from the requirements for expression of the endogenous IgH locus. Thus, although expression of transgenes requires multiple elements from the J(H)-C mu intron--the E mu core enhancer, the matrix attachment regions (MARs) which flank E mu, and several switch-associated elements--B-cell lines in which expression of the endogenous heavy-chain gene is maintained at the normal level in the absence of these intronic elements have occasionally been reported. Gene targeting offers an alternative method for assessing regulatory elements, one in which the role of defined segments of endogenous genes can be evaluated in situ. We have applied this approach to the IgH locus of a hybridoma cell line, generating recombinants which bear predetermined modifications in the functional, endogenous mu heavy-chain gene. Our analysis indicates the following. (i) Ninety-eight percent of the expression of the recombinant endogenous mu gene depends on elements in the MAR-E mu-MAR segment. (ii) Expression of the recombinant mu gene depends strongly on the MARs of the J(H)-C mu intron but not on the adjoining E mu core enhancer and switch regions; because our recombinant cell lines bear only a single copy of the mu gene, our results indicate that mu expression is activated by MAR elements lying within that same mu transcription unit. (iii) The MAR segment includes at least one activating element in addition to those defined previously by the binding of presumptive activating proteins in the nuclear matrix. (iv) Close association of the MARs with

  5. Molecular packing of high-mobility diketo pyrrolo-pyrrole polymer semiconductors with branched alkyl side chains.

    PubMed

    Zhang, Xinran; Richter, Lee J; DeLongchamp, Dean M; Kline, R Joseph; Hammond, Matthew R; McCulloch, Iain; Heeney, Martin; Ashraf, Raja S; Smith, Jeremy N; Anthopoulos, Thomas D; Schroeder, Bob; Geerts, Yves H; Fischer, Daniel A; Toney, Michael F

    2011-09-28

    We describe a series of highly soluble diketo pyrrolo-pyrrole (DPP)-bithiophene copolymers exhibiting field effect hole mobilities up to 0.74 cm(2) V(-1) s(-1), with a common synthetic motif of bulky 2-octyldodecyl side groups on the conjugated backbone. Spectroscopy, diffraction, and microscopy measurements reveal a transition in molecular packing behavior from a preferentially edge-on orientation of the conjugated plane to a preferentially face-on orientation as the attachment density of the side chains increases. Thermal annealing generally reduces both the face-on population and the misoriented edge-on domains. The highest hole mobilities of this series were obtained from edge-on molecular packing and in-plane liquid-crystalline texture, but films with a bimodal orientation distribution and no discernible in-plane texture exhibited surprisingly comparable mobilities. The high hole mobility may therefore arise from the molecular packing feature common to the entire polymer series: backbones that are strictly oriented parallel to the substrate plane and coplanar with other backbones in the same layer.

  6. Diacyltransferase Activity and Chain Length Specificity of Mycobacterium tuberculosis PapA5 in the Synthesis of Alkyl Beta-Diol Lipids

    PubMed Central

    Touchette, Megan H.; Bommineni, Gopal R.; Delle Bovi, Richard J.; Gadbery, John E.; Nicora, Carrie D.; Shukla, Anil K.; Kyle, Jennifer E.; Metz, Thomas O.; Martin, Dwight W.; Sampson, Nicole S.; Miller, W. Todd; Tonge, Peter J.; Seeliger, Jessica C.

    2015-01-01

    Although classified as Gram-positive bacteria, Corynebacterineae possess an asymmetric outer membrane that imparts structural and thereby physiological similarity to more distantly related Gram-negative bacteria. Like lipopolysaccharide in Gram-negative bacteria, lipids in the outer membrane of Corynebacterineae have been associated with the virulence of pathogenic species such as Mycobacterium tuberculosis (Mtb). For example, Mtb strains that lack long, branched-chain alkyl esters known as dimycocerosates (DIMs) are significantly attenuated in model infections. The resultant interest in the biosynthetic pathway of these unusual virulence factors has led to the elucidation of many of the steps leading to the final esterification of the alkyl beta-diol, phthiocerol, with branched-chain fatty acids known as mycocerosates. PapA5 is an acyltransferase implicated in these final reactions. We here show that PapA5 is indeed the terminal enzyme in DIM biosynthesis by demonstrating its dual esterification activity and chain-length preference using synthetic alkyl beta-diol substrate analogues. Applying these analogues to a series of PapA5 mutants, we also revise a model for the substrate binding within PapA5. Finally, we demonstrate that the Mtb Ser/Thr kinases PknB and PknE modify PapA5 on three overlapping Thr residues and a fourth Thr is unique to PknE phosphorylation. These results clarify the DIM biosynthetic pathway and indicate post-translational modifications that warrant further elucidation for their roles in regulation DIM biosynthesis. PMID:26271001

  7. Diacyltransferase Activity and Chain Length Specificity of Mycobacterium tuberculosis PapA5 in the Synthesis of Alkyl β-Diol Lipids.

    PubMed

    Touchette, Megan H; Bommineni, Gopal R; Delle Bovi, Richard J; Gadbery, John E; Nicora, Carrie D; Shukla, Anil K; Kyle, Jennifer E; Metz, Thomas O; Martin, Dwight W; Sampson, Nicole S; Miller, W Todd; Tonge, Peter J; Seeliger, Jessica C

    2015-09-08

    Although they are classified as Gram-positive bacteria, Corynebacterineae possess an asymmetric outer membrane that imparts structural and thereby physiological similarity to more distantly related Gram-negative bacteria. Like lipopolysaccharide in Gram-negative bacteria, lipids in the outer membrane of Corynebacterineae have been associated with the virulence of pathogenic species such as Mycobacterium tuberculosis (Mtb). For example, Mtb strains that lack long, branched-chain alkyl esters known as dimycocerosates (DIMs) are significantly attenuated in model infections. The resultant interest in the biosynthetic pathway of these unusual virulence factors has led to the elucidation of many of the steps leading to the final esterification of the alkyl β-diol, phthiocerol, with branched-chain fatty acids known as mycocerosates. PapA5 is an acyltransferase implicated in these final reactions. Here, we show that PapA5 is indeed the terminal enzyme in DIM biosynthesis by demonstrating its dual esterification activity and chain-length preference using synthetic alkyl β-diol substrate analogues. By applying these analogues to a series of PapA5 mutants, we also revise a model for the substrate binding within PapA5. Finally, we demonstrate that the Mtb Ser/Thr kinases PknB and PknE modify PapA5 on three overlapping Thr residues and that a fourth Thr is unique to PknE phosphorylation. These results clarify the DIM biosynthetic pathway and indicate post-translational modifications that warrant further elucidation for their roles in the regulation of DIM biosynthesis.

  8. Synthesis and characterization of a novel long-alkyl-chain ester-substituted benzimidazole gelator and its octan-1-ol solvate.

    PubMed

    Geiger, H Cristina; Zick, Patricia L; Roberts, William R; Geiger, David K

    2017-04-01

    The synthesis of a novel benzimidazole derivative with a long-chain-ester substituent, namely methyl 8-[4-(1H-benzimidazol-2-yl)phenoxy]octanoate, (3), is reported. Ester (3) shows evidence of aggregation in solution and weak gelation ability with toluene. The octan-1-ol solvate, methyl 8-[4-(1H-benzimidazol-2-yl)phenoxy]octanoate octan-1-ol monosolvate, C22H26N2O3·C8H18O, (4), exhibits a four-molecule hydrogen-bonded motif in the solid state, with N-H...O hydrogen bonds between benzimidazole molecules and O-H...N hydrogen bonds between the octan-1-ol solvent molecules and the benzimidazole unit. The alkyl chains of the ester and the octan-1-ol molecules are in unfolded conformations. The phenylene ring is canted by 10.27 (6)° from the plane of the benzimidazole ring system. H...C contacts make up 20.7% of the Hirshfeld surface coverage. Weak C-H...π interactions involving the benzimidazole alkyl chain and three aromatic rings are observed.

  9. Time-Resolved EPR Study of Electron-Hole Dissociations Influenced by Alkyl Side Chains at the Photovoltaic Polyalkylthiophene:PCBM Interface.

    PubMed

    Miura, Taku; Aikawa, Motoko; Kobori, Yasuhiro

    2014-01-02

    Nanosecond time-resolved electron paramagnetic resonance (TREPR) spectroscopy has been utilized at T = 77 K to characterize alkyl side-chain effects on geometries and on the electronic couplings (VCR) of transient charge-separated (CS) states in the photoactive layers fabricated by the spin-coating of mixed solutions of regioregular polyalkylthiophenes (RR-P3AT) and [6,6]-C61-butyric acid methyl ester (PCBM). By increasing the alkyl side-chain number from 6 to 12 in P3AT, a highly distant and long-lived CS state has been obtained. This result is explained by a coupling of the hole dissociation to the polymer librations by the side-chains. From an exponential decay of VCR with respect to the CS distance, the attenuation factor (βe) has been determined to be βe = 0.2 Å(-1). Such a long-range tunneling feature is explained by the generations of the shallowly trapped, delocalized electron-hole pairs by the dissociation of the hole toward π-stacking directions at the organic photovoltaic interface.

  10. Low-band-gap conjugated polymers of dithieno[2,3-b:7,6-b]carbazole and diketopyrrolopyrrole: effect of the alkyl side chain on photovoltaic properties.

    PubMed

    Deng, Yunfeng; Chen, Yagang; Liu, Jian; Liu, Lihui; Tian, Hongkun; Xie, Zhiyuan; Geng, Yanhou; Wang, Fosong

    2013-06-26

    Four donor–acceptor (D–A) conjugated polymers of dithieno[2,3-b;7,6-b]carbazole (DTC) and diketopyrrolopyrrole, which have different alkyls on the nitrogen atom in the DTC unit and are named as P-C8C8, P-C5C5, P-C12, and P-C10, respectively, have been synthesized for studying the effect of the alkyl side chains on the optoelectronic properties of the polymers. All polymers are soluble in various organic solvents and exhibit identical optical band gaps (E(g)(opt)) of ~1.3 eV and highest occupied molecular orbital energy levels of ~−5.1 eV. Organic thin-film transistors and bulk heterojunction polymer solar cells (BHJ PSCs) with phenyl-C(71)-butyric acid methyl ester (PC(71)BM) as the electron-accepting material were fabricated via solution spin-casting. Compared to the polymers substituted by branched alkyl chains, the polymers with straight alkyl chains show higher hole mobility. Of these polymers, P-C10 exhibits the highest field effect mobility up to 0.011 cm(2)/V·s. The alkyl chain on the DTC unit has a strong impact on the film morphology of polymer:PC(71)BM blends. Severe phase separation was found for polymers containing branched alkyl chains, and those with straight alkyl chains formed uniform films featuring fine phase separation. An open-circuit voltage (V(oc)) of 0.72 V, a short-circuit current density (J(sc)) of 13.4 mA/cm(2), a fill factor (FF) of 62%, and a power conversion efficiency (PCE) of 5.9% were demonstrated for BHJ PSCs based on the P-C10:PC(71)BM [1:3 (w/w)] blend film.

  11. Molecular and crystalline structures of three (S)-4-alkoxycarbonyl-2-azetidinones containing long alkyl side chains from synchrotron X-ray powder diffraction data.

    PubMed

    Seijas, Luis E; Mora, Asiloé J; Delgado, Gerzon E; López-Carrasquero, Francisco; Báez, María E; Brunelli, Michela; Fitch, Andrew N

    2009-12-01

    The (S)-4-alkoxo-2-azetidinecarboxylic acids are optically active beta-lactam derivatives of aspartic acid, which are used as precursors of carbapenem-type antibiotics and poly-beta-aspartates. The crystal structures of three (S)-4-alkoxo-2-azetidinecarboxylic acids with alkyl chains with 10, 12 and 16 C atoms were solved using parallel tempering and refined against the X-ray powder diffraction data using the Rietveld method. The azetidinone rings in the three compounds display a pattern of asymmetrical bond distances and an almost planar conformation; these characteristics are compared with periodic solid-state, gas-phase density-functional theory (DFT) calculations and MOGUL average bond distances and angles from the CSD. The compounds pack along [001] as corrugated sheets separated by approximately 4.40 A and connected by hydrogen bonds of the type N-H...O.

  12. Improving Cellulose Dissolution in Ionic Liquids by Tuning the Size of the Ions: Impact of the Length of the Alkyl Chains in Tetraalkylammonium Carboxylate.

    PubMed

    Meng, Xiangqian; Devemy, Julien; Verney, Vincent; Gautier, Arnaud; Husson, Pascale; Andanson, Jean-Michel

    2017-01-30

    Twenty ionic liquids based on tetraalkylammonium cations and carboxylate anions have been synthesized, characterized, and tested for cellulose dissolution. The amount of cellulose dissolved in these ionic liquids depends strongly on the size of the ions: from 0 to 22 wt % cellulose can be dissolved at 90 °C. The best ionic liquids are less viscous and ammonium carboxylate based ionic liquids can dissolve as much as imidazolium-based ones. The viscosity of an ionic liquid can be decreased by the addition of DMSO as a cosolvent. After the addition of cosolvent, similar amounts of cellulose per ions are reached for most ionic liquids. As observed by rheology, ionic liquids with the longest alkyl chains form a gel when a high amount of cellulose is dissolved; this drastically limits their potential. Molecular simulations and IR spectroscopy have also been used with the aim of understanding how molecular interactions differ between efficient and inefficient ionic liquids.

  13. Control over the Self-Assembly Modes of Pt(II) Complexes by Alkyl Chain Variation: From Slipped to Parallel π-Stacks.

    PubMed

    Allampally, Naveen Kumar; Mayoral, María José; Chansai, Sarayute; Lagunas, María Cristina; Hardacre, Christopher; Stepanenko, Vladimir; Albuquerque, Rodrigo Q; Fernández, Gustavo

    2016-06-01

    We report the self-assembly of a new family of hydrophobic, bis(pyridyl) Pt(II) complexes featuring an extended oligophenyleneethynylene-derived π-surface appended with six long (dodecyloxy (2)) or short (methoxy (3)) side groups. Complex 2, containing dodecyloxy chains, forms fibrous assemblies with a slipped arrangement of the monomer units (dPt⋅⋅⋅Pt ≈14 Å) in both nonpolar solvents and the solid state. Dispersion-corrected PM6 calculations suggest that this organization is driven by cooperative π-π, C-H⋅⋅⋅Cl and π-Pt interactions, which is supported by EXAFS and 2D NMR spectroscopic analysis. In contrast, nearly parallel π-stacks (dPt⋅⋅⋅Pt ≈4.4 Å) stabilized by multiple π-π and C-H⋅⋅⋅Cl contacts are obtained in the crystalline state for 3 lacking long side chains, as shown by X-ray analysis and PM6 calculations. Our results reveal not only the key role of alkyl chain length in controlling self-assembly modes but also show the relevance of Pt-bound chlorine ligands as new supramolecular synthons.

  14. A Single Arabinan Chain Is Attached to the Phosphatidylinositol Mannosyl Core of the Major Immunomodulatory Mycobacterial Cell Envelope Glycoconjugate, Lipoarabinomannan*

    PubMed Central

    Kaur, Devinder; Angala, Shiva K.; Wu, Sz-Wei; Khoo, Kay-Hooi; Chatterjee, Delphi; Brennan, Patrick J.; Jackson, Mary; McNeil, Michael R.

    2014-01-01

    Lipoarabinomannan (LAM) is composed of a phosphatidylinositol anchor followed by a mannan followed by an arabinan that may be capped with various motifs including oligosaccharides of mannose. A related polymer, lipomannan (LM), is composed of only the phosphatidylinositol and mannan core. Both the structure and the biosynthesis of LAM have been studied extensively. However, fundamental questions about the branching structure of LM and the number of arabinan chains on the mannan backbone in LAM remain. LM and LAM molecules produced by three different glycosyltransferase mutants of Mycobacterium smegmatis were used here to investigate these questions. Using an MSMEG_4241 mutant that lacks the α-(1,6)-mannosyltransferase used late in LM elongation, we showed that the reducing end region of the mannan that is attached to inositol has 5–7 unbranched α-6-linked-mannosyl residues followed by two or three α-6-linked mannosyl residues branched with single α-mannopyranose residues at O-2. After these branched mannosyl residues, the α-6-linked mannan chain is terminated with an α-mannopyranose at O-2 rather than O-6 of the penultimate residue. Analysis of the number of arabinans attached to the mannan core of LM in two other mutants (ΔembC and ΔMSMEG_4247) demonstrated exactly one arabinosyl substitution of the mannan core suggestive of the arabinosylation of a linear LM precursor with ∼10–12 mannosyl residues followed by additional mannosylation of the core and arabinosylation of a single arabinosyl “primer.” Thus, these studies suggest that only a single arabinan chain attached near the middle of the mannan core is present in mature LAM and allow for an updated working model of the biosynthetic pathway of LAM and LM. PMID:25231986

  15. In vitro analysis of the effect of alkyl-chain length of anionic surfactants on the skin by using a reconstructed human epidermal model.

    PubMed

    Yamaguchi, Fumiko; Watanabe, Shin-Ichi; Harada, Fusae; Miyake, Miyuki; Yoshida, Masaki; Okano, Tomomichi

    2014-01-01

    We investigated the effect of the alkyl-chain length of anionic surfactants on the skin using an in vitro model. The evaluated anionic surfactants were sodium alkyl sulfate (AS) and sodium fatty acid methyl ester sulfonate (MES), which had different alkyl-chain lengths (C8-C14). Skin tissue damage and permeability were examined using a reconstructed human epidermal model, LabCyte EPI-MODEL24. Skin tissue damage was examined by measuring cytotoxicity with an MTT assay. Liquid chromatography/tandem mass spectrometry (LC/MS-MS) and liquid chromatography/mass spectrometry (LC/MS) were used to detect surfactants that permeated into the assay medium through an epidermal model. To assess the permeation mechanism and cell damage caused by the surfactants through the epidermis, we evaluated the structural changes of Bovine Serum Albumin (BSA), used as a simple model protein, and the fluidity of 1,2-dipalmitoyl-sn-glycero-3-phosphpcholine (DPPC) liposome, which serves as one of the most abundant phospholipid models of living cell membranes in the epidermis. The effects of the surfactants on the proteins were measured using Circular Dichroism (CD) spectroscopy, while the effects on membrane fluidity were investigated by electron spin resonance (ESR) spectroscopy. ET50 (the 50% median effective time) increased as follows: C10 < C12 < C8 < C14 in AS and C8, C10 < C12 < C14 in MES. The order of permeation through the LabCyte EPI-MODEL24 was C10 > C12 > C14, for both AS and MES. For both AS and MES, the order parameter, which is the criteria for the microscopic viscosity of lipid bilayers, increased as follows: C10 < C12 < C14, which means the membrane fluidity is C10 > C12 > C14. It was determined that the difference in skin tissue damage in the LabCyte EPI-MODEL24 with C10 to C14 AS and MES was caused by the difference in permeation and cell membrane fluidity through the lipid bilayer path in the epidermis.

  16. Oil-in-water microemulsions stabilized by 3-(N,N- dimethylalkylammonio)propanesulfonate surfactants of varying alkyl chain length: solubilisation of testos-terone propionate.

    PubMed

    Hsieh, Chien-Ming; Warisnoicharoen, Warangkana; Patel, Raju K; Kianfar, Farnoosh; Lawrence, M Jayne

    2017-03-28

    Solubilisation of the poorly-water soluble drug, testosterone propionate, in co-surfactant-free, dilutable, oil-in-water microemulsions stabilized by zwitterionic surfactants of varying alkyl chain length, namely 3-(N,N-dimethyloctylammonio)propanesulfonate and 3-(N,N-dimethyldodecylammonio)propanesulfonate and containing one of four ethyl ester oils, has been investigated. Both 3-(N,N-dimethyloctylammonio)propanesulfonate and 3-(N,N-dimethyldodecylammonio)propanesulfonate-stabilized microemulsions containing two short chain length oils, ethyl butyrate and ethyl caprylate, while only 3-(N,N-dimethyldodecylammonio)propanesulfonate formed microemulsions incorporating the longer chain length oils, ethyl palmitate and ethyl oleate, albeit to a very much reduced extent. Significantly the microemulsions containing the short chain length oils, ethyl butyrate and ethyl caprylate solubilised more testosterone propionate than the corresponding micelles. However, an inverse correlation existed between testosterone propionate solubility in the bulk oil and solubilisation in the microemulsions, in that ethyl caprylate containing microemulsions solubilised more testosterone propionate than those containing an equivalent amount of ethyl butyrate, despite the drug being more soluble in ethyl butyrate. These results suggest that drug solubility in bulk oil is a poor indicator of drug solubility in microemulsions containing that oil, and whether or not the addition of oil improves drug solubility is dependent upon on how it is incorporated within the microemulsion. The longer the chain length of the oil, the more likely the oil is to form a core in the microemulsion droplet, resulting in an additional locus of drug solubilisation and the possibility of an enhanced solubilisation capacity.

  17. Polyimides with pendant alkyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Young, P. R.

    1982-01-01

    The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

  18. From N-vinylpyrrolidone anions to modified paraffin-like oligomers via double alkylation with 1,8-dibromooctane: access to covalent networks and oligomeric amines for dye attachment

    PubMed Central

    Obels, Daniela; Lievenbrück, Melanie

    2016-01-01

    Summary The double alkylation of N-vinylpyrrolidone (N-VP) with 1,8-dibromooctane yields paraffin-like oligomeric chains bearing polymerizable vinyl moieties. These oligomers were radically crosslinked in bulk with N-VP as co-monomer yielding swellable polymer disks. The vinylic side groups of the N-VP oligomers allow thiol–ene click reactions with 2-aminoethanethiol hydrochloride to obtain reactive amino-functionalized oligomers. Further modification of the free amino groups with 1,4-difluoro-9,10-anthraquinone (DFA) yields red-colored oligomeric anthraquinone dyes. The final reaction of DFA-substituted N-VP oligomers with Jeffamine® M 600 leads to blue-colored and branched oligomers with poly(ethylene glycol) side chains. PMID:27559389

  19. β1-Chain Integrins Are Not Essential for Intimin-Mediated Host Cell Attachment and Enteropathogenic Escherichia coli-Induced Actin Condensation

    PubMed Central

    Liu, Hui; Magoun, Loranne; Leong, John M.

    1999-01-01

    Intimin is a bacterial outer membrane protein required for intimate attachment of enterohemorrhagic and enteropathogenic Escherichia coli (EHEC and EPEC) to mammalian cells. β1-chain integrins have been proposed as candidate receptors for intimin. We found that binding of mammalian cells to immobilized intimin was not detectable unless mammalian cells were preinfected with EPEC or EHEC. β1-chain integrin antagonists or inactivation of the gene encoding the β1-chain did not affect binding of preinfected mammalian cells to intimin or the actin condensation associated with the attachment of EPEC. The results indicate that β1-chain integrins are not essential for intimin-mediated cell attachment or EPEC-mediated actin polymerization. PMID:10085058

  20. Affinity alkylation of the active site of C21 steroid side-chain cleavage cytochrome P-450 from neonatal porcine testis: a unique cysteine residue alkylated by 17-(bromoacetoxy)progesterone.

    PubMed

    Onoda, M; Haniu, M; Yanagibashi, K; Sweet, F; Shively, J E; Hall, P F

    1987-01-27

    The affinity alkylating progesterone analogue 17-(bromoacetoxy)progesterone has been used to label the active site of a microsomal cytochrome P-450 enzyme from neonatal pig testis. The enzyme causes removal of the C20 and C21 side chains from the substrates progesterone and pregnenolone by catalyzing both 17-hydroxylase and C17,20-lyase reactions, which produce the corresponding C19 steroidal precursors of testosterone. The progesterone analogue causes simultaneous inactivation of the two catalytic activities of the enzyme by a first-order kinetic process that obeys saturation kinetics. Progesterone and 17-hydroxyprogesterone each protect the enzyme against inactivation. The progesterone and analogue is a competitive inhibitor of the enzyme with Ki values of 8.4 microM and 7.8 microM for progesterone and 17-hydroxyprogesterone, respectively. The enzyme inactivation and kinetic data are consistent with a theory proposing that the analogue and the two substrates compete for the same active site. The radioactive analogue 17-[( 14C]bromoacetoxy)progesterone causes inactivation of the enzyme with incorporation of 1.5-2.2 mol of the analogue per mole of inactivated enzyme. When this experiment is carried out in the presence of a substrate, then 0.9-1.2 mol of radioactive analogue is incorporated per mole of inactivated enzyme. The data suggest that the analogue can bind to two different sites, one of which is related to the catalytic site. Radiolabeled enzyme samples, from reactions of the 14C-labeled analogue with the enzyme alone or with enzyme in the presence of a substrate, were subjected to amino acid analysis and also to tryptic digestion and peptide mapping.(ABSTRACT TRUNCATED AT 250 WORDS)

  1. Affinity alkylation of the active site of C/sub 21/ steroid side-chain cleavage cytochrome P-450 from neonatal porcine testis: a unique cysteine residue alkylated by 17-(bromoacetoxy)progesterone

    SciTech Connect

    Onoda, M.; Haniu, M.; Yanagibashi, K.; Sweet, F.; Shively, J.E.; Hall, P.F.

    1987-01-27

    The affinity alkylating progesterone analogue 17-(bromoacetoxy)progesterone has been used to label the active site of a microsomal cytochrome P-450 enzyme from neonatal pig testis. The enzyme causes removal of the C/sub 20/ and C/sub 21/ side chains from the substrates progesterone and pregnenolone by catalyzing both 17-hydroxylase and C/sub 17,20/-lyase reactions, which produce the corresponding C/sub 1//sup 9/ steroidal precursors of testosterone. The progesterone analogue causes simultaneous inactivation of the two catalytic activities of the enzyme by a first-order kinetic process that obeys saturation kinetics. Progesterone and 17-hydroxyprogesterone each protect the enzyme against inactivation. The progesterone analogue is a competitive inhibitor of the enzyme with K/sub i/ values of 8.4 ..mu..M and 7.8 ..mu..M for progesterone and 17-hydroxyprogesterone, respectively. The enzyme inactivation and kinetic data are consistent with a theory proposing that the analogue and the two substrates compete for the same active site. The radioactive analogue 17-((/sup 14/C)bromoacetoxy)progesterone causes inactivation of the enzyme with incorporation of 1.5-2.2 mol of the analogue per mole of inactivated enzyme. When this experiment is carried out in the presence of a substrate, then 0.9-1.2 mol of radioactive analogue is incorporated per mole of inactivated enzyme. The data suggest that the analogue can bind to two different sites, one of which is related to the catalytic site. Radiolabeled enzyme samples, from reactions of the /sup 14/C-labeled analogue with the enzyme alone or with enzyme in the presence of a substrate, were subjected to amino acid analysis and also in tryptic digestion and peptide mapping.

  2. Influence of alkyl chain length on charge transport in symmetrically substituted poly(2,5-dialkoxy- p -phenylenevinylene) polymers

    NASA Astrophysics Data System (ADS)

    Tuladhar, Sachetan M.; Sims, Marc; Kirkpatrick, James; Maher, Robert C.; Chatten, Amanda J.; Bradley, Donal D. C.; Nelson, Jenny; Etchegoin, Pablo G.; Nielsen, Christian B.; Massiot, Philippe; George, Wayne N.; Steinke, Joachim H. G.

    2009-01-01

    We report on the hole transport characteristics, as measured by time of flight, of a family of symmetrically substituted dialkoxy poly( p -phenylenevinylene) polymers with different side-chain length. As side-chain length is decreased, the magnitude of the hole mobility μh increases while the field dependence of μh becomes more positive and the temperature dependence of μh becomes stronger. For the shortest side-chain derivative studied, μh exceeds 10-4cm2V-1s-1 at electric fields greater than 105Vcm-1 . The trend in magnitude of μh with side-chain length is consistent with the expected increase in electronic wave-function overlap as interchain separation decreases, while the trends in electric-field and temperature dependences of μh are consistent with increasing site energy disorder. We show that the electrostatic contribution to the site energy difference for pairs of oligomers follows the observed trend as a function of interchain separation, although the pairwise contribution is too small to explain the data quantitatively. Nonresonant Raman spectroscopy is used to characterize the microstructure of our films. We construct spatial maps of the Raman ratio I1280/I1581 and confirm an expected decrease in average film density with side-chain extension. The structural heterogeneity in the maps is analyzed but no clear correlation is observed with transport properties, suggesting that the structural variations relevant for charge transport occur on a length scale finer than the resolution of ˜1μm .

  3. The ability of single-chain surfactants to emulsify an aqueous-based liquid crystal oscillates with odd-even parity of alkyl-chain length.

    PubMed

    Varghese, Nisha; Shetye, Gauri S; Yang, Sijie; Wilkens, Stephan; Smith, Robert P; Luk, Yan-Yeung

    2013-12-15

    The physical properties of many organic molecules often oscillate when the number of carbons in their aliphatic chains changes from odd to even. This odd-even effect for single-chain surfactants in solution is rarely observed. Here, we report the ability of single-chain surfactants to emulsify a class of non-amphiphilic organic salts, disodium cromoglycate (5'DSCG) oscillates as a function of the odd or even number of the aliphatic carbons. This system provides a water-in-oil-in-water emulsion, in which aqueous droplets of 5'DSCG in liquid crystal phases are coated with single-chain surfactants in a bulk carrying aqueous solution. For both surfactants of [Formula: see text] and CH3(CH2)nCOO(-)Na(+), the ability to emulsify 5'DSCG molecules in water is stronger for surfactants with an odd number of sp(3)-hybridized carbon atoms in the aliphatic chains than those with an even number. This observed odd-even effect is consistent with the notion that conventional micelles possess a core of randomly arranged surfactant hydrocarbon tails. However, this water-in-oil-in-water resembles a vesicle system in which the surfactants assemble in a highly ordered structure that separates two aqueous systems. These new self-assembled phases have potential application in the formulation and design of new organic soft materials.

  4. Quantum state-resolved molecular scattering of NO (2Π1 /2) at the gas-[Cnmim][Tf2N] room temperature ionic liquid interface: Dependence on alkyl chain length, collision energy, and temperature

    NASA Astrophysics Data System (ADS)

    Zutz, Amelia; Nesbitt, David J.

    2016-10-01

    Room temperature ionic liquids (RTILs) represent a promising class of chemically tunable, low vapor pressure solvents with myriad kinetic applications that depend sensitively on the nature of gas-molecule interactions at the liquid surface. This paper reports on rovibronically inelastic dynamics at the gas-RTIL interface, colliding supersonically cooled hyperthermal molecular beams of NO (1/2 2Π, N = 0) from 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (or [Cnmim][Tf2N]) and probing the scattered NO molecules via laser induced fluorescence (LIF) from the A(2Σ ) state. Specifically, inelastic energy transfer into NO rovibrational and electronic degrees of freedom is explored as a function of RTIL alkyl chain length (n), incident collision energy (Einc) and surface temperature (Ts). At low collision energies (Einc = 2.7(9) kcal/mol), the scattered NO molecules exhibit a rotational temperature (Trot) systematically colder than Ts for all chain lengths, which signals the presence of non-equilibrium dynamics in the desorption channel. At high collision energies (Einc = 20(2) kcal/mol), microscopic branching into trapping/desorption (TD) and impulsive scattering (IS) pathways is clearly evident, with the TD fraction (α ) exhibiting a step-like increase between short (n = 2, 4) and long (n = 8, 12, 16) alkyl chains consistent with theoretical predictions. For all hydrocarbon chain lengths and RTIL temperature conditions, NO rotational excitation in the IS channel yields hyperthermal albeit Boltzmann-like distributions well described by a "temperature" (TIS = 900 -1200 K) that decreases systematically with increasing n. Non-adiabatic, collision induced hopping between ground and excited spin-orbit states is found to be independent of RTIL alkyl chain length and yet increase with collision energy. The scattering data confirm previous experimental reports of an enhanced presence of the alkyl tail at the gas-RTIL interface with increasing n, as well as

  5. Dendronized Polyimides Bearing Long-Chain Alkyl Groups and Their Application for Vertically Aligned Nematic Liquid Crystal Displays

    PubMed Central

    Tsuda, Yusuke; OH, Jae Min; Kuwahara, Renpei

    2009-01-01

    Polyimides having dendritic side chains were investigated. The terphenylene diamine monomer having a first-generation monodendron, 3,4,5-tris(n-dodecyloxy)-benzoate and the monomer having a second-generation monodendron, 3,4,5-tris[-3’,4’,5’-tri(n-dodecyloxy)benzyloxy]benzoate were successfully synthesized and the corresponding soluble dendritic polyimides were obtained by polycondensation with conventional tetracarboxylic dianhydride monomers such as benzophenone tertracarboxylic dianhydride (BTDA). The two-step polymerizations in NMP that is a general method for the synthesis of soluble polyimides is difficult; however, the expected dendritic polyimides can be obtained in aromatic polar solvents such as m-cresol and pyridine. The solubility of these dendoronized polyimides is characteristic; soluble in common organic solvents such as dichloromethane, chloroform, toluene and THF. These dendronized polyimides exhibited high glass transition temperatures and good thermal stability in both air and under nitrogen. Their application as alignment layers for LCDs was investigated, and it was found that these polyimides having dendritic side chains were applicable for the vertically aligned nematic liquid crystal displays (VAN-LCDs). PMID:20087476

  6. Formation of carbon chain molecular anions by radiative electron attachment and their destruction by photodetachment

    NASA Astrophysics Data System (ADS)

    Khamesian, Marjan; Douguet, Nicolas; Raoult, Maurice; Dulieu, Olivier; Kokoouline, Viatcheslav

    2016-05-01

    Several negative ions Cn H- (n = 4 , 6 , 8), Cn N- (n = 1 , 3 , 5) have been recently observed in the interstellar medium (ISM). A possible mechanism of formation is radiative electron attachment (REA). In this study we develop a first principle theoretical approach to study the REA and apply the approach to the formation of the negative molecular ions CN-, C2 H-, C3 N-, C4 H-, C5 N-, C6 H-, and C8 H-. The theoretical approach is based on the UK R-matrix calculations. Cross sections and rate coefficients for formation of these ions by REA to the corresponding neutral radicals are calculated. There is no experimental data on REA of these ions. However, using a similar approach we have also calculated cross sections for photodetachment of the negative ions and compared the obtained results with available experimental data. The good agreement with photodetachment experimental data provides a confirmation that the REA cross sections obtained in this study is also reliable. NSF Grant PHYS-1506391.

  7. Chromatographic behaviour of naproxen-cyclodextrin complexes stationary phase C8 alkyl chain as competitor for the drug release from cyclodextrin cavity.

    PubMed

    Rozou, S; Antoniadou-Vyza, E

    2004-07-02

    Cyclodextrins are known to alter the absorptivity of the guest molecules, therefore, analytical methods that are based on the spectrophotometric data present accuracy problems. In this work, using RP-HPLC methods for naproxen-cyclodextrins quantitation, extensive analytical inaccuracies are detected. Competitive complexation technique is utilised in an attempt to develop an analytical method enabling the determination of naproxen as a free drug. For this reason, stationary phases with silica ligands that can function as competing agents were used, thus contributing to the drug release. The release of the drug from cyclodextrins complexes is achieved by modification of the thermodynamic parameters that determine the stability constant, by changing: the interactions with the mobile phase components (e.g. pH, organic modifier, competitive agents) and the interactions with the stationary phase ligands (C8). After studying the parameters affecting the interaction between the alkyl-chain C8 and naproxen:cyclodextrin complexes, we developed and validated a new specific method for the accurate determination of the drug. Consecutive accumulation of the cyclodextrins molecules on the stationary phase was studied.

  8. Alkyl polyglucose enhancing propionic acid enriched short-chain fatty acids production during anaerobic treatment of waste activated sludge and mechanisms.

    PubMed

    Luo, Jingyang; Feng, Leiyu; Chen, Yinguang; Sun, Han; Shen, Qiuting; Li, Xiang; Chen, Hong

    2015-04-15

    Adding alkyl polyglucose (APG) into an anaerobic treatment system of waste activated sludge (WAS) was reported to remarkably improve the production of short-chain fatty acids (SCFAs), especially propionic acid via simultaneously accelerating solubilization and hydrolysis, enhancing acidification, inhibiting methanogenesis and balancing carbon to nitrogen (C/N) ratio of substrate. Not only the production of SCFAs, especially propionic acid, was significantly improved by APG, but also the feasible operation time was shortened. The SCFAs yield at 0.3 g APG per gram of total suspended solids (TSS) within 4 d was 2988 ± 60 mg chemical oxygen demand (COD) per liter, much higher than that those from sole WAS or sole WAS plus sole APG. The corresponding yield of propionic acid was 1312 ± 25 mg COD/L, 7.9-fold of sole WAS. Mechanism investigation showed that during anaerobic treatment of WAS in the presence of APG both the solubilization and hydrolysis were accelerated and the acidification was enhanced, while the methanogenesis was inhibited. Moreover, the activities of key enzymes involved in WAS hydrolysis and acidification were improved through the adjustment of C/N ratio of substrates with APG. The abundance of microorganisms responsible for organic compounds hydrolysis and SCFAs production was also observed to be greatly enhanced with APG via 454 high-throughput pyrosequencing analysis.

  9. Biodegradation of the endocrine disrupter 4-tert-octylphenol by the yeast strain Candida rugopelliculosa RRKY5 via phenolic ring hydroxylation and alkyl chain oxidation pathways.

    PubMed

    Rajendran, Ranjith Kumar; Huang, Shir-Ly; Lin, Chu-Ching; Kirschner, Roland

    2017-02-01

    4-(1,1,3,3-tetramethylbutane)-phenol (4-tert-OP) is one of the most prevalent endocrine disrupting pollutants. Information about bioremediation of 4-tert-OP remains limited, and no study has been reported on the mechanism of 4-tert-OP degradation by yeasts. The yeast Candida rugopelliculosa RRKY5 was proved to be able to utilize 4-methylphenol, bisphenol A, 4-ethylphenol, 4-tert-butylphenol, 4-tert-OP, 4-tert-nonylphenol, isooctane, and phenol under aerobic conditions. The optimum conditions for 4-tert-OP degradation were 30°C, pH 5.0, and an initial 4-tert-OP concentration of 30mgL(-1); the maximum biodegradation rate constant was 0.107d(-1), equivalent to a minimum half-life of 9.6d. Scanning electron microscopy revealed formation of arthroconidia when cells were grown in the presence of 4-tert-OP, whereas the cells remained in the budding form without 4-tert-OP. Identification of the 4-tert-OP degradation metabolites using liquid chromatography-hybrid mass spectrometry revealed three different mechanisms via both branched alkyl side chain and aromatic ring cleavage pathways.

  10. Evaluation and comparison of n-alkyl chain and polar ligand bonded stationary phases for protein separation in reversed-phase liquid chromatography.

    PubMed

    Ding, Ling; Guo, Zhimou; Xiao, Yuansheng; Xue, Xingya; Zhang, Xiuli; Liang, Xinmiao

    2014-09-01

    Protein retention is very sensitive to the change of solvent composition in reversed-phase liquid chromatography for so called "on-off" mechanism, leading to difficulty in mobile phase optimization. In this study, a novel 3-chloropropyl trichlorosilane ligand bonded column was prepared for protein separation. The differences in retention characteristics between the 3-chloropropyl trichlorosilane ligand bonded column and n-alkyl chain modified (C2, C4, C8) stationary phases were elucidated by the retention equation l nk=a+cC(B). Retention parameters (a and c) of nine standard proteins with different molecular weights were calculated by using homemade software. Results showed that retention times of nine proteins were similar on four columns, but the 3-chloropropyl trichlorosilane ligand bonded column obtained the lowest retention parameter values of larger proteins. It meant that their retention behavior affected by acetonitrile concentration would be different due to lower |c| values. More specifically, protein elution windows were broader, and retentions were less sensitive to the change of acetonitrile concentration on the 3-chloropropyl trichlorosilane ligand bonded column than that on other columns. Meanwhile, the 3-chloropropyl trichlorosilane ligand bonded column displayed distinctive selectivity for some proteins. Our results indicated that stationary phase with polar ligand provided potential solutions to the "on-off" problem and optimization in protein separation.

  11. From chain collapse to new structures: spectroscopic properties of poly(3-thiophene acetic acid) upon binding by alkyl trimethylammonium bromide surfactants.

    PubMed

    Franco, I Echavarri; Lorchat, P; Lamps, J-P; Schmutz, M; Schröder, A; Catala, J-M; Combet, J; Schosseler, F

    2012-03-13

    The binding of cationic surfactants with varying alkyl chain length to a regiorandom conjugated polyanion, poly(3-thiophene acetic acid) (PTAA), is studied in an aqueous buffer by using absorption and emission spectroscopies, photon correlation spectroscopy, isothermal titration calorimetry, and cryogenic transmission electron microscopy. We study the mixed solutions as a function of composition ratio R of surfactant molecules to monomer units molar concentrations, at low polymer concentration and in a very wide composition range (10(-6) < R < 10(2)) below the critical micellar concentration. Upon surfactant binding, the molecularly dispersed chains first collapse progressively and then form new structures as the mixed aggregates get enriched in surfactant. The collapse leads to a strong decrease of the conjugation length and to a blue shift of the absorption spectra by 30 to 50 nm. The new structures are responsible for a new intense emission band at about 600 nm, red-shifted by nearly 130 nm from the initial emission maximum of the polymer (~472 nm). As the surfactant tail becomes shorter, the blue shift of the absorption spectra and the intensity raise of the new emission are delayed to larger composition ratios while their variations become smoother functions of the surfactant concentration. These particular spectroscopic properties of PTAA seem related to its unique combination of a strongly hydrophobic backbone, a large ratio of contour length to persistence length, and an overall good aqueous solubility. Our results show that such features are well suited to design a colorimetric biosensor at small composition ratio, and a fluorescent biomarker at large composition ratio.

  12. Chain architecture and micellization: A mean-field coarse-grained model for poly(ethylene oxide) alkyl ether surfactants

    NASA Astrophysics Data System (ADS)

    García Daza, Fabián A.; Colville, Alexander J.; Mackie, Allan D.

    2015-03-01

    Microscopic modeling of surfactant systems is expected to be an important tool to describe, understand, and take full advantage of the micellization process for different molecular architectures. Here, we implement a single chain mean field theory to study the relevant equilibrium properties such as the critical micelle concentration (CMC) and aggregation number for three sets of surfactants with different geometries maintaining constant the number of hydrophobic and hydrophilic monomers. The results demonstrate the direct effect of the block organization for the surfactants under study by means of an analysis of the excess energy and entropy which can be accurately determined from the mean-field scheme. Our analysis reveals that the CMC values are sensitive to branching in the hydrophilic head part of the surfactant and can be observed in the entropy-enthalpy balance, while aggregation numbers are also affected by splitting the hydrophobic tail of the surfactant and are manifested by slight changes in the packing entropy.

  13. Chain architecture and micellization: A mean-field coarse-grained model for poly(ethylene oxide) alkyl ether surfactants

    SciTech Connect

    García Daza, Fabián A.; Mackie, Allan D.; Colville, Alexander J.

    2015-03-21

    Microscopic modeling of surfactant systems is expected to be an important tool to describe, understand, and take full advantage of the micellization process for different molecular architectures. Here, we implement a single chain mean field theory to study the relevant equilibrium properties such as the critical micelle concentration (CMC) and aggregation number for three sets of surfactants with different geometries maintaining constant the number of hydrophobic and hydrophilic monomers. The results demonstrate the direct effect of the block organization for the surfactants under study by means of an analysis of the excess energy and entropy which can be accurately determined from the mean-field scheme. Our analysis reveals that the CMC values are sensitive to branching in the hydrophilic head part of the surfactant and can be observed in the entropy-enthalpy balance, while aggregation numbers are also affected by splitting the hydrophobic tail of the surfactant and are manifested by slight changes in the packing entropy.

  14. Dielectric properties of liquid-crystal azomethine polymer with a side alkyl-substituted chain, doped with fullerene C60

    NASA Astrophysics Data System (ADS)

    Kovalev, D. S.; Kostromin, S. V.; Musteaţa, V.; Cozan, V.; Bronnikov, S. V.

    2016-04-01

    We studied the actual and imaginary components of the dielectric constant of liquid-crystal azomethine polymer with a side chain, doped with 0.5 wt % of fullerene C60, over a wide range of temperatures and frequencies; measurements were made by means of dielectric spectroscopy. By analyzing the frequency dependence of the dielectric constant, we detected the relaxation processes (α, β1, and β2) in the nanocomposite, corresponding to certain modes of molecular motion and described them by the Arrhenius equations (β1- and β2-processes) and the Vogel-Fulcher-Tamman equation (α-process). An antiplasticization effect is discovered after doping the polymer with fullerene C60, which manifests itself in increasing the glass transition temperature of the nanocomposite compared to this parameter typical of pure polymer.

  15. Chemistry of anthracene-acetylene oligomers XXV: on-surface chirality of a self-assembled molecular network of a fan-blade-shaped anthracene-acetylene macrocycle with a long alkyl chain.

    PubMed

    Tsuya, Takuya; Iritani, Kohei; Tahara, Kazukuni; Tobe, Yoshito; Iwanaga, Tetsuo; Toyota, Shinji

    2015-03-27

    An anthracene cyclic dimer with two different linkers and a dodecyl group was synthesized by means of coupling reactions. The calculated structure had a planar macrocyclic π core and a linear alkyl chain. Scanning tunneling microscopy observations at the 1-phenyloctane/graphite interface revealed that the molecules formed a self-assembled monolayer that consisted of linear striped bright and dark bands. In each domain, the molecular network consisted of either Re or Si molecules that differed in the two-dimensional chirality about the macrocyclic faces, which led to a unique conglomerate-type self-assembly. The molecular packing mode and the conformation of the alkyl chains are discussed in terms of the intermolecular interactions and the interactions between the molecules and the graphite surface with the aid of MM3 simulations of a model system.

  16. Additional oxidized and alkyl chain breakdown metabolites of the plasticizer DINCH in urine after oral dosage to human volunteers.

    PubMed

    Schütze, André; Otter, Rainer; Modick, Hendrik; Langsch, Angelika; Brüning, Thomas; Koch, Holger M

    2017-01-01

    Hexamoll(®) DINCH(®) (diisononyl-cyclohexane-1,2-dicarboxylate) is a new high molecular weight plasticizer and a non-aromatic phthalate substitute. In this follow-up study, we further investigated the extensive oxidative metabolism of Hexamoll(®) DINCH(®) after oral dosage of 50 mg to three male volunteers (0.552-0.606 mg/kg body weight). Urine samples were consecutively collected over 48 h post-dose. Chemical analysis was carried out by HPLC-MS/MS with labeled internal standards. New metabolites were tentatively identified and quantified via fragmentation analogies and new standard substances. In addition to the five urinary DINCH metabolites previously reported by us, we identified two groups of extensively oxidized metabolites characterized (a) by multiple side chain oxidation and breakdown and (b) by hydroxylation at the cyclohexane ring. The five newly identified carboxylated breakdown metabolites represented in sum 5.12 ± 0.49 % of the applied dose. MCHxCH (cyclohexane-1,2-dicarboxylic acid mono carboxyhexyl ester) was identified as a major metabolite (2.71 ± 0.34 %) and thus represents the second most important specific metabolite of DINCH after OH-MINCH (10.7 ± 2.1 %). Less than 1 % was excreted as ring-hydroxylated metabolites (four metabolites identified). Based upon a new reference standard, we can also update oxo-MINCH to 2.6 % of the applied dose. This follow-up study increases the total amount of the recovered dose from 39.2 to 45.7 % and describes a new major metabolite (MCHxCH) of DINCH that can be used as an additional valuable and specific biomarker to assess DINCH(®) exposure in future human biomonitoring studies.

  17. Critical role of alkyl chain branching of organic semiconductors in enabling solution-processed N-channel organic thin-film transistors with mobility of up to 3.50 cm² V(-1) s(-1).

    PubMed

    Zhang, Fengjiao; Hu, Yunbin; Schuettfort, Torben; Di, Chong-an; Gao, Xike; McNeill, Christopher R; Thomsen, Lars; Mannsfeld, Stefan C B; Yuan, Wei; Sirringhaus, Henning; Zhu, Daoben

    2013-02-13

    Substituted side chains are fundamental units in solution processable organic semiconductors in order to achieve a balance of close intermolecular stacking, high crystallinity, and good compatibility with different wet techniques. Based on four air-stable solution-processed naphthalene diimides fused with 2-(1,3-dithiol-2-ylidene)malononitrile groups (NDI-DTYM2) that bear branched alkyl chains with varied side-chain length and different branching position, we have carried out systematic studies on the relationship between film microstructure and charge transport in their organic thin-film transistors (OTFTs). In particular synchrotron measurements (grazing incidence X-ray diffraction and near-edge X-ray absorption fine structure) are combined with device optimization studies to probe the interplay between molecular structure, molecular packing, and OTFT mobility. It is found that the side-chain length has a moderate influence on thin-film microstructure but leads to only limited changes in OTFT performance. In contrast, the position of branching point results in subtle, yet critical changes in molecular packing and leads to dramatic differences in electron mobility ranging from ~0.001 to >3.0 cm(2) V(-1) s(-1). Incorporating a NDI-DTYM2 core with three-branched N-alkyl substituents of C(11,6) results in a dense in-plane molecular packing with an unit cell area of 127 Å(2), larger domain sizes of up to 1000 × 3000 nm(2), and an electron mobility of up to 3.50 cm(2) V(-1) s(-1), which is an unprecedented value for ambient stable n-channel solution-processed OTFTs reported to date. These results demonstrate that variation of the alkyl chain branching point is a powerful strategy for tuning of molecular packing to enable high charge transport mobilities.

  18. Solid-state phosphorescence of trans-bis(salicylaldiminato)platinum(II) complexes bearing long alkyl chains: morphology control towards intense emission.

    PubMed

    Komiya, Naruyoshi; Itami, Nao; Naota, Takeshi

    2013-07-15

    Morphology control for intense solid-state phosphorescence of non-emissive, but potentially emissive crystals of platinum complexes and the mechanistic rationale are described. A series of trans-bis(salicylaldiminato)platinum(II) complexes bearing linear alkyl chains (1a: n=5; 1b: n=8; 1c: n=12; 1d: n=14; 1e: n=16; 1f: n=18) was synthesized and the solid-state emission properties were examined by using crystals/aggregates prepared under various precipitation conditions. Crystals of 1e, prepared using "kinetic" conditions including rapid cooling, high concentrations, and poor solvents, emit intensive yellow phosphorescence (λ(max)=545 nm) under UV irradiation at 298 K with an absolute quantum efficiency of 0.36, whereas all the crystals of 1a-1f prepared using "thermodynamic" conditions including slow cooling, low concentrations, and good solvents were either non- or less emissive with Φ(298K) values of 0.12 (1a), 0.11 (1b), 0.10 (1c), 0.07 (1d), 0.02 (1e), and 0.02 (1f) under the same measurement conditions. The amorphous solid 1e, prepared by rapid cooling and freeze-drying, was also non-emissive (Φ(298K)=0.02, 0.02). Temperature-dependent emission spectra showed that the kinetic crystals of 1e exhibit high heat-resistance towards emission decay with increasing temperature, whereas the amorphous solid 1e is entirely heat-quenchable. This is a rare example of the change from a non-emissive crystal into a highly emissive crystal by morphology control through crystal engineering. Emission spectra and powder X-ray diffraction (XRD) patterns of the emissive, kinetic crystals of 1e are clearly distinct from those of the less emissive, thermodynamic crystals of 1a-1f. Single-crystal XRD unequivocally establishes that the thermodynamic crystals of 1d have a multilayered lamellar structure supported by highly regulated, consecutive π-stacking interactions between imine moieties, whereas the kinetic crystals of 1e have a face-to-edge lamellar structure with less

  19. Intraperiplasmic growth of Bdellovibrio bacteriovorus 109J: attachment of long-chain fatty acids to escherichia coli peptidoglycan.

    PubMed Central

    Thomashow, M F; Rittenberg, S C

    1978-01-01

    During the initial stages of intraperiplasmic growth of Bdellovibrio bacteriovorus on Escherichia coli, the peptidoglycan of the E. coli becomes acylated with long-chain fatty acids, primarily palmitic acid (60%) and oleic acid (20%). The attachment of the fatty acids to the peptidoglycan involves a carboxylic-ester bond, i.e., they were removed by treatment with alkaline hydroxylamine. Their linkage to the peptidoglycan does not involve a protein molecule. When the bdelloplast peptidoglycan was digested with lysozyme, the fatty acid-containing split products behaved as lipopeptidoglycan, i.e., they were extracted into the organic phase of 1-butanol:acetic acid:water (4:15) two-phase system; all of the lysozyme split products generated from normal E. coli peptidoglycan were extracted into the water phase. It is suggested that the function of the acylation reaction is to help stabilize the bdelloplast outer membrane against osmotic forces. In addition, a model is presented to explain how a bdellovibrio penetrates, stabilizes, and lyses a substrate cell. PMID:357411

  20. Introduction of unsaturation into the N-n-alkyl chain of the nicotinic receptor antagonists, NONI and NDNI: effect on affinity and selectivity.

    PubMed

    Sumithran, Sangeetha P; Crooks, Peter A; Xu, Rui; Zhu, Jun; Deaciuc, Agripina G; Wilkins, Lincoln H; Dwoskin, Linda P

    2005-08-29

    N-n-octylnicotinium iodide (NONI) and N-n-decylnicotinium iodide (NDNI) are selective nicotinic receptor (nAChR) antagonists mediating nicotine-evoked striatal dopamine (DA) release, and inhibiting [3H]nicotine binding, respectively. This study evaluated effects of introducing unsaturation into the N-n-alkyl chains of NONI and NDNI on inhibition of [3H]nicotine and [3H]methyllycaconitine binding (alpha4beta2* and alpha7* nAChRs, respectively), (86)Rb+ efflux and [3H]DA release (agonist or antagonist effects at alpha4beta2* and alpha6beta2*-containing nAChRs, respectively). In the NONI series, introduction of a C3-cis- (NONB3c), C3-trans- (NONB3t), C7-double-bond (NONB7e), or C3-triple-bond (NONB3y) afforded a 4-fold to 250-fold increased affinity for [3H]nicotine binding sites compared with NONI. NONB7e and NONB3y inhibited nicotine-evoked 86Rb+ efflux, indicating alpha4beta2* antagonism. NONI analogs exhibited a 3-fold to 8-fold greater potency inhibiting nicotine-evoked [3H]DA overflow compared with NONI (IC50 = 0.62 microM; Imax = 89%), with no change in Imax, except for NONB3y (Imax = 50%). In the NDNI series, introduction of a C4-cis- (NDNB4c), C4-trans-double-bond (NDNB4t), or C3-triple-bond (NDNB3y) afforded a 4-fold to 80-fold decreased affinity for [3H]nicotine binding sites compared with NDNI, whereas introduction of a C9 double-bond (NDNB9e) did not alter affinity. NDNB3y and NDNB4t inhibited nicotine-evoked 86Rb+ efflux, indicating antagonism at alpha4beta2* nAChRs. Although NDNI had no effect, NDNB4t and NDNB9e potently inhibited nicotine-evoked [3H]DA overflow (IC50 = 0.02-0.14 microM, Imax = 90%), as did NDNB4c (IC50 = 0.08 microM; Imax = 50%), whereas NDNB3y showed no inhibition. None of the analogs had significant affinity for alpha7* nAChRs. Thus, unsaturated NONI analogs had enhanced affinity at alpha4beta2*- and alpha6beta2*-containing nAChRs, however a general reduction of affinity at alpha4beta2* and an uncovering of antagonist effects at

  1. Use of short chain alkyl imidazolium ionic liquids for on-line stacking and sweeping of methotrexate, flinic acid and folic acid: their application to biological fluids.

    PubMed

    Abd El-Hady, Deia; Albishri, Hassan M; Rengarajan, Rajesh; Wätzig, Hermann

    2014-07-01

    Methotrexate (MTX) is widely used for the treatment of many types of cancer. Folinic acid (FNA) and folic acid (FA) were usually simultaneously supplemented with MTX to reduce the side effects of a folate deficiency. This study, for the first time, included on-line sample preconcentration by stacking and sweeping techniques under reduced or enhanced electric conductivity in the sample region using short chain alkyl imidazolium ionic liquids (ILs) as micelle forming agents for analyte focusing. Both analyte focusing by micelle collapse (AFMC) and sweeping-MEKC had been investigated for the comparison of their effectiveness to examine simultaneously MTX, FNA and FA in plasma and urine under physiological conditions. In sweeping-MEKC, the sample solution without micelles was hydrodynamically injected as a long plug into a fused-silica capillary pre-filled with phosphate buffer containing 3.0 mol/L of 1-butyl-3-methylimidazolium bromide (BMIMBr). Using AFMC, the analytes were prepared in BMIMBr micellar matrix and hydrodynamically injected into the phosphate buffer without IL micelles. The conductivity ratio between BGE and sample (γ, BGE/sample) was optimized to be 3.0 in sweeping-MEKC and 0.33 in AFMC resulting the adequate separation of analytes within 4.0 min. To reduce the possibility of BMIMBr adsorption, an appropriate rinsing protocol was used. The limits of detection were calculated as 0.1 ng/mL MTX, 0.05 ng/mL FNA and 0.05 ng/mL FA by sweeping-MEKC and 0.5 ng/mL MTX, 0.3 ng/mL FNA and 0.3 ng/mL FA by AFMC. The accuracy was tested by recovery in plasma and urine matrices giving values ranging between 90 and 110%. Both stacking and sweeping by BMIMBr could be successfully used for the rapid, selective and sensitive determination of pharmaceuticals in complex matrices due to its fascinating properties, including high conductivity, good thermal stability and ability to form different types of interactions by electrostatic, hydrophobic, hydrogen bonding and

  2. Structure-Antibacterial Activity Relationships of Imidazolium-Type Ionic Liquid Monomers, Poly(ionic liquids) and Poly(ionic liquid) Membranes: Effect of Alkyl Chain Length and Cations.

    PubMed

    Zheng, Zhiqiang; Xu, Qiming; Guo, Jiangna; Qin, Jing; Mao, Hailei; Wang, Bin; Yan, Feng

    2016-05-25

    The structure-antibacterial activity relationship between the small molecular compounds and polymers are still elusive. Here, imidazolium-type ionic liquid (IL) monomers and their corresponding poly(ionic liquids) (PILs) and poly(ionic liquid) membranes were synthesized. The effect of chemical structure, including carbon chain length of substitution at the N3 position and charge density of cations (mono- or bis-imidazolium) on the antimicrobial activities against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was investigated by determination of minimum inhibitory concentration (MIC). The antibacterial activities of both ILs and PILs were improved with the increase of the alkyl chain length and higher charge density (bis-cations) of imidazolium cations. Moreover, PILs exhibited lower MIC values relative to the IL monomers. However, the antibacterial activities of PIL membranes showed no correlation to those of their analogous small molecule IL monomers and PILs, which increased with the charge density (bis-cations) while decreasing with the increase of alkyl chain length. The results indicated that antibacterial property studies on small molecules and homopolymers may not provide a solid basis for evaluating that in corresponding polymer membranes.

  3. Supramolecular soft and hard materials based on self-assembly algorithms of alkyl-conjugated fullerenes.

    PubMed

    Nakanishi, Takashi

    2010-05-28

    Dimensionally controlled and hierarchically assembled supramolecular architectures in nano/micro/bulk length scales are formed by self-organization of alkyl-conjugated fullerenes. The simple molecular design of covalently attaching hydrophobic long alkyl chains to fullerene (C(60)) is different from the conventional (hydrophobic-hydrophilic) amphiphilic molecular designs. The two different units of the alkyl-conjugated C(60) are incompatible but both are soluble in organic solvents. The van der Waals intermolecular forces among long hydrocarbon chains and the pi-pi interaction between C(60) moieties govern the self-organization of the alkyl-conjugated C(60) derivatives. A delicate balance between the pi-pi and van der Waals forces in the assemblies leads to a wide variety of supramolecular architectures and paves the way for developing supramolecular soft materials possessing various morphologies and functions. For instance, superhydrophobic films, electron-transporting thermotropic liquid crystals and room-temperature liquids have been demonstrated. Furthermore, the unique morphologies of the assemblies can be utilised as a template for the fabrication of nanostructured metallic surfaces in a highly reproducible and sustainable way. The resulting metallic surfaces can serve as excellent active substrates for surface-enhanced Raman scattering (SERS) owing to their plasmon enhancing characteristics. The use of self-assembling supramolecular objects as a structural template to fabricate innovative well-defined metal nanomaterials links soft matter chemistry to hard matter sciences.

  4. Non-woven fibrous materials with antibacterial properties prepared by tailored attachment of quaternized chitosan to electrospun mats from maleic anhydride copolymer.

    PubMed

    Ignatova, Milena; Petkova, Zhanina; Manolova, Nevena; Markova, Nadya; Rashkov, Iliya

    2012-01-01

    In order to impart antibacterial properties to microfibrous electrospun materials from styrene/maleic anhydride copolymers, quaternized chitosan derivatives (QCh) containing alkyl substituents of different chain lengths are covalently attached to the mats. A complete inhibition of the growth of bacteria, S. aureus (Gram-positive) and E. coli (Gram-negative), for a contact time of 30–120 min or a decrease of the bacterial titer by 2–3 log units is observed depending on the quaternization degree, the chain length of the alkyl substituent, and the molar mass of QCh. The modified mats are also effective in suppressing the adhesion of pathogenic S. aureus bacteria.

  5. Supramolecular complexation of N-alkyl- and N,N'-dialkylpiperazines with cucurbit[6]uril in aqueous solution and in the solid state.

    PubMed

    Rekharsky, Mikhail V; Yamamura, Hatsuo; Mori, Tadashi; Sato, Akihiro; Shiro, Motoo; Lindeman, Sergey V; Rathore, Rajendra; Shiba, Kouhei; Ko, Young Ho; Selvapalam, Narayanan; Kim, Kimoon; Inoue, Yoshihisa

    2009-01-01

    Complex stoichiometry/composition and degree of oligomerization (oligomeric supramolecular complex formation) of cucurbit[6]uril (CB[6]) with N-alkyl- and N,N'-dialkylpiperazine were investigated in aqueous solutions by means of isothermal titration calorimetry (ITC), ESI-MS, NMR and light scattering measurements. It was found that the complex stability and the degree of oligomerization increase with elongating the alkyl chain attached to the piperazine core. X-ray crystallographic studies revealed a clear correlation between the structure of CB[6]-alkylpiperazine crystals obtained from aqueous solutions and the molecular weight/properties of host-guest oligomers existed in the solution as supramolecular "seeds" of crystal formation.

  6. Morphology and phase controlled cobalt nanostructures in magnetic polypropylene nanocomposites: the role of alkyl chain-length in maleic anhydride grafted polypropylene.

    PubMed

    He, Qingliang; Yuan, Tingting; Luo, Zhiping; Haldolaarachchige, Neel; Young, David P; Wei, Suying; Guo, Zhanhu

    2013-04-04

    A novel function of maleic anhydride grafted polypropylene (PP) with different backbone chain-lengths was demonstrated, i.e., in controlling the cobalt morphologies (dispersed polyhedral vs. assembled chain nanostructure), crystalline structures (ε- vs. β-phase), and magnetic property (242 vs. 808 Oe) in the synthesized magnetic PP nanocomposites.

  7. DNA-directed alkylating ligands as potential antitumor agents: sequence specificity of alkylation by intercalating aniline mustards.

    PubMed

    Prakash, A S; Denny, W A; Gourdie, T A; Valu, K K; Woodgate, P D; Wakelin, L P

    1990-10-23

    The sequence preferences for alkylation of a series of novel parasubstituted aniline mustards linked to the DNA-intercalating chromophore 9-aminoacridine by an alkyl chain of variable length were studied by using procedures analogous to Maxam-Gilbert reactions. The compounds alkylate DNA at both guanine and adenine sites. For mustards linked to the acridine by a short alkyl chain through a para O- or S-link group, 5'-GT sequences are the most preferred sites at which N7-guanine alkylation occurs. For analogues with longer chain lengths, the preference of 5'-GT sequences diminishes in favor of N7-adenine alkylation at the complementary 5'-AC sequence. Magnesium ions are shown to selectively inhibit alkylation at the N7 of adenine (in the major groove) by these compounds but not the alkylation at the N3 of adenine (in the minor groove) by the antitumor antibiotic CC-1065. Effects of chromophore variation were also studied by using aniline mustards linked to quinazoline and sterically hindered tert-butyl-9-aminoacridine chromophores. The results demonstrate that in this series of DNA-directed mustards the noncovalent interactions of the carrier chromophores with DNA significantly modify the sequence selectivity of alkylation by the mustard. Relationships between the DNA alkylation patterns of these compounds and their biological activities are discussed.

  8. Effects of alkyl parabens on plant pathogenic fungi.

    PubMed

    Ito, Shinsaku; Yazawa, Satoru; Nakagawa, Yasutaka; Sasaki, Yasuyuki; Yajima, Shunsuke

    2015-04-15

    Alkyl parabens are used as antimicrobial preservatives in cosmetics, food, and pharmaceutical products. However, the mode of action of these chemicals has not been assessed thoroughly. In this study, we determined the effects of alkyl parabens on plant pathogenic fungi. All the fungi tested, were susceptible to parabens. The effect of linear alkyl parabens on plant pathogenic fungi was related to the length of the alkyl chain. In addition, the antifungal activity was correlated with the paraben-induced inhibition of oxygen consumption. The antifungal activity of linear alkyl parabens likely originates, at least in part, from their ability to inhibit the membrane respiratory chain, especially mitochondrial complex II. Additionally, we determined that some alkyl parabens inhibit Alternaria brassicicola infection of cabbage.

  9. Cross-Neutralization Activity of Single-Chain Variable Fragment (scFv) Derived from Anti-V3 Monoclonal Antibodies Mediated by Post-Attachment Binding.

    PubMed

    Maruta, Yasuhiro; Kuwata, Takeo; Tanaka, Kazuki; Alam, Muntasir; Valdez, Kristel Paola Ramirez; Egami, Yoshika; Suwa, Yoshiaki; Morioka, Hiroshi; Matsushita, Shuzo

    2016-09-21

    The V3 loop in the envelope (Env) of HIV-1 is one of the major targets of neutralizing antibodies. However, this antigen is hidden inside the Env trimer in most isolates and is fully exposed only during CD4-gp120 interaction. Thus, primary HIV-1 isolates are relatively resistant to anti-V3 antibodies because IgG is too large to access the V3 loop. To overcome this obstacle, we constructed single-chain variable fragments (scFvs) from anti-V3 monoclonal antibodies 0.5γ, 5G2, and 16G6. Enhanced neutralization by 0.5γ and 5G2 scFvs was observed in strains resistant to their IgG counterparts. Neutralization coverage by 0.5γ scFv reached up to 90% of the tested viruses (tier 2 and 3 classes). The temperature-regulated neutralization assay revealed that extensive cross-neutralization of 0.5γ scFv can be explained by post-attachment neutralization. Neutralization assay involving viruses carrying an inter-subunit disulfide bond (SOS virus) showed that the neutralization-susceptible timeframe after attachment was 60 to 120 min. These results indicate that the scFvs efficiently access the V3 loop and subsequently neutralize HIV-1, even after virus attachment to the target cells. Based on its broad and potent neutralizing activity, further development of anti-V3 scFv for therapeutic and preventive strategies is warranted.

  10. A new approach to the side chain formation of 24-alkyl-22-hydroxy steroids: application to the preparation of early brassinolide biosynthetic precursors.

    PubMed

    Hurski, Alaksiej L; Zhabinskii, Vladimir N; Khripach, Vladimir A

    2012-06-01

    A new synthetic route to 22S-hydroxy-24R-methyl steroids has been developed and applied for the preparation of cathasterone, (22S)-hydroxycampesterol, and 6-deoxocathasterone, which are precursors in the early stages of the biosynthesis of brassinolide. The construction of the steroid side chain with the correct stereochemistry at C-24 is based on the use of Claisen rearrangement. The introduction of the 22-hydroxyl group has been achieved by epoxidation of the Δ(22)-double bond, nucleophilic opening of the intermediate mesyl epoxide with sodium sulfide, and desulfurization of the formed tetrahydrothiophenes with Raney nickel.

  11. Poly(ethyleneoxide) functionalization through alkylation

    DOEpatents

    Sivanandan, Kulandaivelu; Eitouni, Hany Basam; Li, Yan; Pratt, Russell Clayton

    2015-04-21

    A new and efficient method of functionalizing high molecular weight polymers through alkylation using a metal amide base is described. This novel procedure can also be used to synthesize polymer-based macro-initiators containing radical initiating groups at the chain-ends for synthesis of block copolymers.

  12. Regioselective synthesis and biological profiling of butyric and phenylalkylcarboxylic esters derivated from D-mannose and xylitol: influence of alkyl chain length on acute toxicity.

    PubMed

    Pouillart, P; Douillet, O; Scappini, B; Gozzini, A; Santini, V; Grossi, A; Pagliai, G; Strippoli, P; Rigacci, L; Ronco, G; Villa, P

    1999-01-01

    Regiospecific synthesis of 12 novel n-butyric and phenylalkylcarboxylic monoesters of mannose and xylitol was achieved. The strategy adopted, avoided a tedious intramolecular transesterification step, previously described for the synthesis of analogous compounds and permitted the facile synthesis of a new generation of stable derivatives. The general tolerance of the drugs has been assayed after intravenous administration of a bolus dose into mice. Monobutyric esters showed a low toxicity commensurate with the requirements for future development. A relationship was observed between chain length and toxicity. In contrast, phenylacetic, 3-phenylpropionic and 4-phenylbutyric esters were found to be toxic. Phenylbutyric esters induced marked and specific neuromuscular damage. Preliminary biological investigations of the new series of monobutyric esters showed them to retain the benificial biological properties of butyric acid whilst remaining relatively non toxic. They induced an inhibition of in vitro proliferation of 10 human cases of de novo acute myeloid leukemia (AML) primary cultures and AML established cell lines. AML blasts growth appeared to be blocked and cell differentiation was established. Transcription and expression of maturation markers and finally apoptosis were observed. Moreover, human gamma-chain hemoglobin (HbF) synthesis in erythroleukemia cells was stimulated by monobutyric esters. Mannose and xylitol butyric derivatives would appear to have exciting potential in treatment of beta-Hemoglobinopathies, sickle cell anemia and cancer.

  13. Effect of alkyl chain of room temperature ionic liquid (RTILs) on the phase behavior of [C2mim][C(n)SO4]/TX-100/cyclohexane microemulsions: solvent and rotational relaxation study.

    PubMed

    Ghosh, Surajit; Banerjee, Chiranjib; Mandal, Sarthak; Rao, Vishal Govind; Sarkar, Nilmoni

    2013-05-16

    In this investigation, we present microemulsions comprising a nonionic surfactant, Triton X-100 (TX-100), cyclohexane as nonpolar phase, and room temperature ionic liquids (RTILs) as a polar medium. To investigate the effect of alkyl chain length of ionic liquid on the physicochemical properties of microemulsions, we have used 1-ethyl-3-methylimidazolium n-butyl sulfate [C2mim][C4SO4], 1-ethyl-3-methylimidazolium n-hexyl sulfate [C2mim][C6SO4], and 1-ethyl-3-methylimidazolium n-octyl sulfate [C2mim][C8SO4] as polar media. The phase behavior of these ternary systems is investigated by direct observation of transition from clear transparent solution to turbid solution by using UV-vis spectrophotometer at 298 K. The single-phase region is found to increase with increase in chain length of RTIL anion. Dynamic light scattering (DLS) measurements revealed the formation of highly stable nano-sized RTIL-containing microemulsions. The size of the microemulsions increases with the addition of ionic liquid. The maximum increase in size is observed with the addition of [C2mim][C4SO4]. It is proposed that the long octyl chain of octyl sulfate allows the anion to align itself along the TX-100 molecules which increases the rigidity of microemulsions, whereas in case of [C2mim][C4SO4], the short butyl chain is apparently unable to do the same. The dynamics of solvent and rotational relaxation of coumarin 480 (C-480) has also been investigated in these ionic liquid containing microemulsions ([C2mim][C4SO4]/TX-100/cyclohexane, [C2mim][C6SO4]/TX-100/cyclohexane, and [C2mim][C8SO4]/TX-100/cyclohexane) using picosecond time-resolved fluorescence spectroscopy. In RTIL microemulsions, solvent relaxation becomes retarded compared to neat RTIL. We have also shown that with increasing R value, the solvation dynamics becomes faster and the decrease in average solvation time is more pronounced in [C2mim][C4SO4]/TX-100/cyclohexane compared to [C2mim][C6SO4]/TX-100/cyclohexane and [C2mim][C8SO4

  14. Polyimide characterization studies - Effect of pendant alkyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Young, P. R.

    1984-01-01

    The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

  15. Spontaneous intercalation of long-chain alkyl ammonium into edge-selectively oxidized graphite to efficiently produce high-quality graphene

    PubMed Central

    Wei, Liangming; Wu, Fei; Shi, Diwen; Hu, Changchen; Li, Xiaolin; Yuan, Weien; Wang, Jian; Zhao, Jiang; Geng, Huijuan; Wei, Hao; Wang, Ying; Hu, Nantao; Zhang, Yafei

    2013-01-01

    Mass production of high-quality graphene nanosheets (GNs) is essential for practical applications. We report that oxidation of graphite by low concentration KMnO4 at relatively high temperature (60°C) leads to edge-selectively oxidized graphite (EOG) which preserves the high crystalline graphitic structure on its basal planes while the edges are functionalized by oxygen-containing groups. Long-chain tetradecyl-ammonium salt (C14N+) could be spontaneously intercalated into EOG to form intercalated EOG-C14N+ compounds. Gentle and short-time sonication of EOG-C14N+ in toluene can full exfoliate EOG into edge-oxidized graphene nanosheets (EOGNs) with concentration of 0.67 mg/ml, monolayer population up to 90% and lateral size from 1 μm to >100 μm. The EOG and EOGN films show excellent electrical conductance, which is far superior to their graphene oxide (GO) counterparts. Our method provides an efficient way to produce high-quality GNs, and the resultant EOG also can be directly used for production of multifunctional materials and devices. PMID:24022463

  16. Synthetic high-charge organomica: effect of the layer charge and alkyl chain length on the structure of the adsorbed surfactants.

    PubMed

    Pazos, M Carolina; Castro, Miguel A; Orta, M Mar; Pavón, Esperanza; Valencia Rios, Jesús S; Alba, María D

    2012-05-15

    A family of organomicas was synthesized using synthetic swelling micas with high layer charge (Na(n)Si(8-n)Al(n)Mg(6)F(4)O(20)·XH(2)O, where n = 2, 3, and 4) exchanged with dodecylammonium and octadecylammonium cations. The molecular arrangement of the surfactant was elucidated on the basis on XRD patterns and DTA. The ordering conformation of the surfactant molecules into the interlayer space of micas was investigated by (13)C, (27)Al, and (29)Si MAS NMR. The arrangement of alkylammonium ions in these high-charge synthetic micas depends on the combined effects of the layer charge of the mica and the chain length of the cation. In the organomicas with dodecylammonium, a transition from a parallel layer to a bilayer-paraffin arrangement is observed when the layer charge of the mica increases. However, when octadecylammonium is the interlayer cation, the molecular arrangement of the surfactant was found to follow the bilayer-paraffin model for all values of layer charge. The amount of ordered conformation all-trans is directly proportional of layer charge.

  17. Alkyl ferulates in wound healing potato tubers.

    PubMed

    Bernards, M A; Lewis, N G

    1992-10-01

    Seven ferulic acid esters of 1-alkanols ranging in carbon length from C16 to C28 were synthesized and an HPLC protocol for their separation developed. Extracts prepared from wound healing potato (Solanum tuberosum) tubers and analysed by HPLC indicated that alkyl ferulate esters begin to accumulate 3-7 days after wound treatment. Of the nine esters identified by EIMS, (including two esters of odd chain length alkanols) hexadecyl and octadecyl ferulates were predominant. Alkyl ferulate esters were restricted to the wound periderm.

  18. Inhibitory Activities of Alkyl Syringates and Related Compounds on Aflatoxin Production

    PubMed Central

    Furukawa, Tomohiro; Iimura, Kurin; Kimura, Taichi; Yamamoto, Toshiyoshi; Sakuda, Shohei

    2016-01-01

    Inhibitors of aflatoxin production of aflatoxigenic fungi are useful for preventing aflatoxin contamination in crops. As methyl syringate weakly inhibits aflatoxin production, aflatoxin production inhibitory activities of additional alkyl syringates with alkyl chains from ethyl to octyl were examined. Inhibitory activity toward aflatoxin production of Aspergillus flavus became stronger as the length of the alkyl chains on the esters became longer. Pentyl, hexyl, heptyl, and octyl syringates showed strong activity at 0.05 mM. Heptyl and octyl parabens, and octyl gallate also inhibited aflatoxin production as strongly as octyl syringate. Alkyl parabens and alkyl gallates inhibit the complex II activity of the mitochondrial respiration chain; thus, whether alkyl syringates inhibit complex II activity was examined. Inhibitory activities of alkyl syringates toward complex II also became stronger as the length of the alkyl chains increased. The complex II inhibitory activity of octyl syringate was comparable to that of octyl paraben and octyl gallate. These results suggest that alkyl syringates, alkyl parabens, and alkyl gallates, including commonly used food additives, are useful for aflatoxin control. PMID:27338472

  19. Synthesis, surface characterization, and biointeraction studies of low-surface energy side-chain polyetherurethanes

    NASA Astrophysics Data System (ADS)

    Porter, Stephen Christopher

    1999-10-01

    New segmented polyetherurethanes (PEUs) with low surface energy hydrocarbon and fluorocarbon side-chains attached to the polymer hard segments were synthesized. The surface chemistry of solvent cast polymer films was studied using X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, and dynamic contact angle (DCA) measurements. Increases in the overall density and length of the alkyl side-chains within the PEUs resulted in greater side-chain concentrations at the polymer surface. PEUs bearing long alkyl (> C10 ) and perfluorocarbon side-chains were found to posses surfaces with highly enriched side-chain concentrations relative to the bulk polymer. In PEUs with significant side-chain surface enrichment, the relatively polar hard segment blocks were shown to reside in high concentrations just below the side-chain enriched surface layer. Furthermore, DCA measurements demonstrated that the surface of the alkyl side-chain PEUs did not undergo significant rearrangement when placed into an aqueous environment, whereas the surface of a hard segment model polymer bearing C18 sidechains (PEU-C18-HS) did. Hydrogen bonding within the PEUs was examined using FTIR and was shown to be disrupted by the addition of side-chains; an effect dependent on the density but not on the length of the side-chains. Heteropolymer blends comprised of mixtures of high side-chain density and side-chain free PEUs were compared with homopolymers having the same overall side-chain concentration as the blends. Significantly more surface enrichment of side-chains was found in the heteropolymer blends whereas hydrogen bonding nearly the same as in the homopolymers. Adsorption of native and delipidized human serum albumin (HSA) from pure solution and blood plasma; the elutabilty of adsorbed HSA; and static platelet adhesion to plasma preadsorbed surfaces, were all examined on alkyl side-chain PEUs. Several polymers with high C18 side-chain densities displayed increased

  20. DNA-directed alkylating agents. 1. Structure-activity relationships for acridine-linked aniline mustards: consequences of varying the reactivity of the mustard.

    PubMed

    Gourdie, T A; Valu, K K; Gravatt, G L; Boritzki, T J; Baguley, B C; Wakelin, L P; Wilson, W R; Woodgate, P D; Denny, W A

    1990-04-01

    A series of DNA-targeted aniline mustards have been prepared, and their chemical reactivity and in vitro and in vivo cytotoxicity have been evaluated and compared with that of the corresponding simple aniline mustards. The alkylating groups were anchored to the DNA-intercalating 9-aminoacridine chromophore by an alkyl chain of fixed length attached at the mustard 4-position through a link group X, while the corresponding simple mustards possessed an electronically identical small group at this position. The link group was varied to provide a series of compounds of similar geometry but widely differing mustard reactivity. Variation in biological activity should then largely be a consequence of this varying reactivity. Rates of mustard hydrolysis in the two series related only to the electronic properties of the link group, with attachment of the intercalating chromophore having no effect. The cytotoxicities of the simple mustards correlated well with group electronic properties (with a 200-300-fold range in IC50S). The corresponding DNA-targeted mustards were much more potent (up to 100-fold), but their IC50 values varied much less with linker group electronic properties. Most of the DNA-targeted mustards showed in vivo antitumor activity, being both more active and more dose-potent than either the corresponding untargeted mustards and chlorambucil. These results show that targeting alkylating agents to DNA by attachment to DNA-affinic units may be a useful strategy.

  1. Alkyl-functionalized oxide-free silicon nanoparticles: synthesis and optical properties.

    PubMed

    Rosso-Vasic, Milena; Spruijt, Evan; van Lagen, Barend; De Cola, Luisa; Zuilhof, Han

    2008-10-01

    Highly monodisperse silicon nanoparticles (1.57 +/- 0.21 nm) are synthesized with a covalently attached alkyl monolayer on a gram scale. Infrared spectroscopy shows that these silicon nanoparticles contain only a few oxygen atoms per nanoparticle. XPS spectra clearly show the presence of unoxidized Si and attached alkyl chains. Owing to the relatively efficient synthesis (yields approximately 100-fold higher than of those previously reported) the molar extinction coefficient epsilon can be measured: epsilon(max) = 1.7 x 10(-4) M(-1)cm(-1), only a factor of 4 lower than that of CdS and CdSe nanoparticles of that size. The quantum yield of emission ranges from 0.12 (C(10)H(21)-capping) to 0.23 (C(16)H(33)-capping). UV/Vis absorption and emission spectroscopy show clear vibrational progressions (974 +/- 14 cm(-1); up to five vibrational bands visible at room temperature), resembling bulk SiC phonons, which support the monodispersity observed by TEM. This was also confirmed by time-resolved fluorescence anisotropy measurements, which display a strictly monoexponential decay that can only be indicative of monodisperse, ball-shaped nanoparticles.

  2. Elastic bounded diffusion and electron propagation: dynamics of the wiring of a self-assembly of immunoglobulins bearing terminally attached ferrocene poly(ethylene glycol) chains according to a spatially controlled organization.

    PubMed

    Anne, A; Demaille, C; Moiroux, J

    2001-05-23

    Molecular monolayers of immunoglobulins bearing terminally attached ferrocene poly(ethylene glycol) chains (IgG-PEG-Fc) were self-assembled at an electrode surface in a step-by-step manner involving antigen-antibody recognition reactions. The total number N of assembled IgG-PEG-Fc monolayers and the number of spacers n(i) separating two successive IgG-PEG-Fc monolayers were controlled and varied. Electron transport through the protein assembly involves the dynamics of the terminally attached PEG chains and isotopic electron exchange between ferrocene heads belonging to successive IgG-PEG-Fc monolayers. The model of elastic bounded diffusion enabled us to analyze quantitatively the dependence of the rate of electron transport on N, n(i), and the rate constant (k(e)) of isotopic electron exchange. Wiring of a molecular monolayer of redox enzyme is also quantitatively characterized.

  3. I. Enabling Single-Chain Surfactants to Form Vesicles by Nonamphiphilic Liquid Crystals in Water II. Controlling Attachment and Ligand-Mediated Adherence of Candida albicans on Monolayers

    NASA Astrophysics Data System (ADS)

    Varghese, Nisha

    This dissertation describes a fundamental study of weak noncovalent interactions and surface forces that exist at the interfaces of various interacting moieties (small molecules or microbes), and its relevance to colloidal and material chemistry. Chapter 1 presents an emulsion system that enables single-chain anionic or nonionic surfactants to sequester and encapsulate certain water-soluble organic salts, leading to the formation of vesicles in water. The water-soluble organic salt in the system comprises of disodium cromoglycate crystals that are emulsified by surfactants in water to form stable liquid crystal droplets. The work provides an exception to the rule of geometric packing factor that dictates formation of micelles by the surfactants in water. Chapter 2 shows that the odd or even number of carbon atoms present in the aliphatic chain of surfactants affect the ability of surfactants to emulsify aqueous-based liquid crystals of disodium cromoglycate. Such an odd-even effect is frequently observed for solid state properties like melting point, heat of fusion and refractive index but is rarely observed for molecules present in solution. When mixed in water, anionic single-chain surfactants with odd number of carbon atoms emulsifies disodium cromoglycate to form liquid crystal droplets, while surfactants with even number of carbon atoms fail to emulsify disodium cromoglycate. Chapter 3 Bolaamphiphiles usually form vesicles only in extreme conditions or in the presence of surfactants. Here, we explore the co-assembly system of synthesized bolaamphiphiles and disodium cromoglycate in water. The combination of the self-assembly forces of the bolaamphiphile and self-associating property of disodium cromoglycate liquid crystals act together at the interface form a unique microemulsion of liquid crystal droplets of disodium cromoglycate embedded in liquid crystal phase. Chapter 4 describes a key event (adhesion) that precedes infections caused by Candida albicans

  4. ALKYL PYROPHOSPHATE METAL SOLVENT EXTRACTANTS AND PROCESS

    DOEpatents

    Long, R.L.

    1958-09-30

    A process is presented for the recovery of uranium from aqueous mineral acidic solutions by solvent extraction. The extractant is a synmmetrical dialkyl pyrophosphate in which the alkyl substituents have a chain length of from 4 to 17 carbon atoms. Mentioned as a preferred extractant is dioctyl pyrophosphate. The uranium is precipitated irom the organic extractant phase with an agent such as HF, fluoride salts. alcohol, or ammonia.

  5. Synthesis Of Alkyl Hydroperoxides Via Alkylation Of gem-Dihydroperoxides

    PubMed Central

    Kyasa, ShivaKumar; Puffer, Benjamin W.

    2013-01-01

    Two-fold alkylation of 1,1-dihydroperoxides, followed by hydrolysis of the resulting bisperoxyacetals, provides a convenient method for synthesis of primary and secondary alkyl hydroperoxides. PMID:23469994

  6. Alkyl and Aromatic Amines as Digestive Ripening/Size Focusing Agents for Gold Nanoparticles

    PubMed Central

    Sun, Yijun; Jose, Deepa; Sorensen, Christopher; Klabunde, Kenneth J.

    2013-01-01

    Both long chain alkyl thiols and alkyl amines behave as size focusing agents for gold nanoparticles, a process that is under thermodynamic control. However, amines do not oxidize surface gold atoms while thiols do oxidize surface gold to gold(I) with evolution of hydrogen gas. Therefore, alkyl amines participate in digestive ripening by a different mechanism. The efficiency of alkyl amines for this process is described and compared, and ultimate gold particle size differences are discussed. Reported herein is a detailed investigation of alkyl chain lengths for alkyl amines, aromatic amines (aniline), and unusually reactive amines (2-phenylethyl amine). Also, two methods of preparation of the crude gold nanoparticles were employed: gold ion reduction/inverse micelle vs. metal vaporization (Solvated Metal Atom Dispersion—SMAD).

  7. Effects of alkyl substituents of xanthine on phosphodiesterase isoenzymes.

    PubMed

    Miyamoto, K; Sakai, R; Kurita, M; Ohmae, S; Sanae, F; Sawanishi, H; Hasegawa, T; Takagi, K

    1995-03-01

    The structure-activity relationships of a series of alkylxanthine derivatives were investigated. The partition coefficient of alkylxanthines enlarged with an elongation of the alkyl chain at the 1-, 3-, or 7-position of xanthine. There was a mild correlation between the apparent partition coefficient and the tracheal relaxant activity or the inhibitory activity on phosphodiesterase (PDE) IV isoenzyme, while the tracheal relaxant activity closely correlated with the PDE IV inhibitory activity. Regarding substituents at different positions, the alkylation at the 3-position increased the inhibitory activity on every PDE isoenzyme. The alkylation at the 1-position potentiated the inhibitory activity on PDE IV with the alkyl chain length, but decreased the activities on other PDE isoenzymes. The alkylation at the 7-position was characteristic in its decrease in inhibitory activity on PDE III. These results suggested that the potency of the inhibitory activity of xanthine derivatives on PDE isoenzymes is not dependent simply upon their hydrophobicity but upon change in the affinity for the active sites on PDE isoenzymes by the introduction of the alkyl group at particular positions of the xanthine skeleton.

  8. Attachment Disorganization.

    ERIC Educational Resources Information Center

    Solomon, Judith, Ed.; George, Carol, Ed.

    Disorganized attachment relationships were first formally identified on the basis of the anomalous behavior of some infants during laboratory separations and reunions with the parent. This book presents new research and theory on the topic of attachment disorganization, an area of investigation that is of increasing importance in the study of…

  9. Synthesis and antiviral activity of some C2-, C4-, and C6-substituted pyrazolo[3,4-D]pyrimidine acyclonucleosides with the alkylating chains of ACV, HBG, and ISO-DHPG.

    PubMed

    Moukha-Chafiq, Omar; Taha, Mohamed Labd; Lazrek, Hassan Bihi; Vasseur, Jean-Jacques; Clercq, Erik De

    2006-01-01

    A useful route to obtain trisubstituted pyrazolo[3,4-d]pyrimidines 14-17 is described. Those later were coupled with the alkylating agents 18-20 as in ACV, HBG, and iso-DHPG to give, after deprotection, the desired acylonucleosides 33-44. Almost all of the new compounds were evaluated for their inhibitory effects against the replication of various DNA viruses in culture.

  10. Synthesis and antifungal activity of natural product-based 6-alkyl-2 3 4 5-tetrahydropyridines

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Seven 6-alkyl-2,3,4,5-tetrahydropyridines (5a–5g) that mimic the natural products piperideines that were recently identified in the fire ant venom have been synthesized. Compounds 5c–5g with the C-6 alkyl chain lengths from C14 to C18 showed varying degrees of antifungal activities, with 5e (6-hexa...

  11. Lipophilic Triphenylphosphonium Cations Inhibit Mitochondrial Electron Transport Chain and Induce Mitochondrial Proton Leak

    PubMed Central

    Anděl, Michal

    2015-01-01

    Background The lipophilic positively charged moiety of triphenylphosphonium (TPP+) has been used to target a range of biologically active compounds including antioxidants, spin-traps and other probes into mitochondria. The moiety itself, while often considered biologically inert, appears to influence mitochondrial metabolism. Methodology/Principal Findings We used the Seahorse XF flux analyzer to measure the effect of a range of alkylTPP+ on cellular respiration and further analyzed their effect on mitochondrial membrane potential and the activity of respiratory complexes. We found that the ability of alkylTPP+ to inhibit the respiratory chain and decrease the mitochondrial membrane potential increases with the length of the alkyl chain suggesting that hydrophobicity is an important determinant of toxicity. Conclusions/Significance More hydrophobic TPP+ derivatives can be expected to have a negative impact on mitochondrial membrane potential and respiratory chain activity in addition to the effect of the biologically active moiety attached to them. Using shorter linker chains or adding hydrophilic functional groups may provide a means to decrease this negative effect. PMID:25927600

  12. Method of making alkyl esters

    DOEpatents

    Elliott, Brian

    2010-09-14

    Methods of making alkyl esters are described herein. The methods are capable of using raw, unprocessed, low-cost feedstocks and waste grease. Generally, the method involves converting a glyceride source to a fatty acid composition and esterifying the fatty acid composition to make alkyl esters. In an embodiment, a method of making alkyl esters comprises providing a glyceride source. The method further comprises converting the glyceride source to a fatty acid composition comprising free fatty acids and less than about 1% glyceride by mass. Moreover, the method comprises esterifying the fatty acid composition in the presence of a solid acid catalyst at a temperature ranging firm about 70.degree. C. to about 120.degree. C. to produce alkyl esters, such that at least 85% of the free fatty acids are converted to alkyl esters. The method also incorporates the use of packed bed reactors for glyceride conversion and/or fatty acid esterification to make alkyl esters.

  13. Anticancer activity of botanical alkyl hydroquinones attributed to topoisomerase II poisoning

    SciTech Connect

    Huang, C.-P.; Fang, W.-H.; Lin, L.-I.; Chiou, Robin Y.; Kan, L.-S.; Chi, N.-H.; Chen, Y.-R.; Lin, T.-Y.; Lin, S.-B.

    2008-03-15

    Cytotoxic alkyl hydroquinone compounds have been isolated from many plants. We previously isolated 3 structurally similar cytotoxic alkyl hydroquinone compounds from the sap of the lacquer tree Rhus succedanea L. belonging to the sumac family, which have a long history of medicinal use in Asia. Each has an unsaturated alkyl chain attached to the 2-position of a hydroquinone ring. One of these isolates, 10'(Z),13'(E),15'(E)-heptadecatrienylhydroquinone [HQ17(3)], being the most cytotoxic, was chosen for studying the anticancer mechanism of these compounds. We found that HQ17(3) was a topoisomerase (Topo) II poison. It irreversibly inhibited Topo II{alpha} activity through the accumulation of Topo II-DNA cleavable complexes. A cell-based assay showed that HQ17(3) inhibited the growth of leukemia HL-60 cells with an EC{sub 50} of 0.9 {mu}M, inhibited the topoisomerase-II-deficient cells HL-60/MX2 with an EC{sub 50} of 9.6 {mu}M, and exerted no effect on peripheral blood mononuclear cells at concentrations up to 50 {mu}M. These results suggest that Topo II is the cellular drug target. In HL-60 cells, HQ17(3) promptly inhibited DNA synthesis, induced chromosomal breakage, and led to cell death with an EC{sub 50} about one-tenth that of hydroquinone. Pretreatment of the cells with N-acetylcysteine could not attenuate the cytotoxicity and DNA damage induced by HQ17(3). However, N-acetylcysteine did significantly reduce the cytotoxicity of hydroquinone. In F344 rats, intraperitoneal injection of HQ17(3) for 28 days induced no clinical signs of toxicity. These results indicated that HQ17(3) is a potential anticancer agent, and its structural features could be a model for anticancer drug design.

  14. A novel type of highly effective nonionic gemini alkyl O-glucoside surfactants: a versatile strategy of design.

    PubMed

    Liu, Songbai; Sang, Ruocheng; Hong, Shan; Cai, Yujing; Wang, Hua

    2013-07-09

    A novel type of highly effective gemini alkyl glucosides has been rationally designed and synthesized. The gemini surfactants have been readily prepared by glycosylation of the gemini alkyl chains that are synthesized with regioselective ring-opening of ethylene glycol epoxides by the alkyl alcohols. The new gemini alkyl glucosides exhibit significantly better surface activity than the known results. Then rheological, DLS, and TEM studies have revealed the intriguing self-assembly behavior of the novel gemini surfactants. This study has proved the effectiveness of the design of gemini alkyl glucosides which is modular, extendable, and synthetically simple. The new gemini surfactants have great potential as nano carriers in drug and gene delivery.

  15. Transesterified tyrosol and hydroxytyrosol alkyl esters from cuphea oil – antioxidant behavior in Liposomes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Tyrosol and hydroxytyrosol are the antioxidant molecules abundantly found in olive oil. Transesterification of tyrosol and hydroxytyrosol with cuphea oil results in medium chain alkyl esters with antioxidant properties. Membrane partitioning, antioxidant capacity, and membrane location of these nove...

  16. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  17. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  18. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  19. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  20. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  1. Effects of alkyl substitutions of xanthine skeleton on bronchodilation.

    PubMed

    Sakai, R; Konno, K; Yamamoto, Y; Sanae, F; Takagi, K; Hasegawa, T; Iwasaki, N; Kakiuchi, M; Kato, H; Miyamoto, K

    1992-10-30

    Structure-activity relationships in a series of 1,3,7-trialkyl-xanthine were studied with guinea pigs. Relaxant actions in the tracheal muscle were increased with alkyl chain length at the 1- and 3-positions of the xanthine skeleton, but decreased by alkylation at the 7-position. Positive chronotropic actions in the right atrium were potentiated with 3-alkyl chain length but tended to decrease with 1-alkylation and diminish by 7-substitution. Consequently, while the 1- and 3-substitutions were equally important for the tracheal smooth muscle relaxation, the substitution at the 1-position was more important than the 3-substitution for bronchoselectivity. The 7-alkylation may be significant to cancel heart stimulation. There were good correlations between the smooth muscle relaxant action and the cyclic AMP-PDE inhibitory activity in 3-substituents and the affinity for adenosine (A1) receptors in 1-, 3-, and 7-substituents. This suggests that not only the cyclic AMP-PDE inhibitory activity but also the adenosine antagonistic activity is important in the bronchodilatory effects of alkylxanthines. Among these xanthine derivatives, 1-butyl-3-propylxanthine and its 7-methylated derivative showed high bronchoselectivity in the in vitro and in vivo experiments compared to theophylline and enprofylline and may be new candidates for bronchodilator.

  2. Solid-phase extraction-gas chromatography and solid-phase extraction-gas chromatography-mass spectrometry determination of corrosion inhibiting long-chain primary alkyl amines in chemical treatment of boiler water in water-steam systems of power plants.

    PubMed

    Kusch, Peter; Knupp, Gerd; Hergarten, Marcus; Kozupa, Marian; Majchrzak, Maria

    2006-04-28

    Gas chromatography with simultaneous flame-ionization detection (FID) and a nitrogen-phosphorus detection (NPD) as well as gas chromatography-mass spectrometry (GC/MS) has been used to characterize long-chain primary alkyl amines after derivatization with trifluoroacetic anhydride (TFAA). Electron impact ionization- (EI) and negative chemical ionization (NCI) mass spectra of trifluoroacetylated derivatives of the identified tert-octadecylamines are presented for the first time. The corrosion inhibiting alkyl amines were applied in a water-steam circuit of energy systems in the power industry. Solid-phase extraction (SPE) with octadecyl bonded silica (C18) sorbents followed by gas chromatography were used for quantification of the investigated tert-octadecylamines in boiler water, superheated steam and condensate samples from the power plant. The estimated values were: 89 microg l(-1)(n = 5, RSD = 7.8%), 45 microg l(-1) (n = 5, RSD = 5.4%) and 37 microg l(-1)(n = 5, RSD = 2.3%), respectively.

  3. Synthesis of alkylated deoxynojirimycin and 1,5-dideoxy-1,5-iminoxylitol analogues: polar side-chain modification, sulfonium and selenonium heteroatom variants, conformational analysis, and evaluation as glycosidase inhibitors.

    PubMed

    Szczepina, Monica G; Johnston, Blair D; Yuan, Yue; Svensson, Birte; Pinto, B Mario

    2004-10-06

    The syntheses of N-alkylated deoxynojirimycin and 1,5-dideoxy-1,5-iminoxylitol derivatives having either a D- or an L-erythritol-3-sulfate functionalized N-substituent are reported. The alkylating agent used was a cyclic sulfate derivative, whereby selective attack of the nitrogen atom at the least hindered primary center afforded the desired ammonium salt. In aqueous solution, these salts were configurationally labile at the ammonium center. Sulfonium and/or selenonium analogues of the ammonium salts were prepared by analogous reactions. The chalcogen salts were obtained as mixtures of diastereomers, separable in some cases, differing only in the stereochemistry at the configurationally stable sulfur or selenium atoms. Proof of configuration and conformation of each compound was obtained by detailed NMR experiments. The compounds are six-membered ring analogues of salacinol, a known sulfonium-salt glucosidase inhibitor. Evaluation of the target compounds for enzyme inhibition of the glucosidase enzyme glucoamylase G2 indicated that these compounds were either inactive or, at best, only weak inhibitors of maltose hydrolysis.

  4. Interaction between alkyl radicals and single wall carbon nanotubes.

    PubMed

    Denis, Pablo A

    2012-06-30

    The addition of primary, secondary, and tertiary alkyl radicals to single wall carbon nanotubes (SWCNTs) was studied by means of dispersion corrected density functional theory. The PBE, B97-D, M06-L, and M06-2X functionals were used. Consideration of Van der Waals interactions is essential to obtain accurate addition energies. In effect, the enthalpy changes at 298 K, for the addition of methyl, ethyl, isopropyl, and tert-butyl radicals onto a (5,5) SWCNT are: -25.7, -25.1, -22.4, and -16.6 kcal/mol, at the M06-2X level, respectively, whereas at PBE/6-31G* level they are significantly lower: -25.0, -19.0, -16.7, and -5.0 kcal/mol respectively. Although the binding energies are small, the attached alkyl radicals are expected to be stable because of the large desorption barriers. The importance of nonbonded interactions was more noticeable as we moved from primary to tertiary alkyl radicals. Indeed, for the tert-butyl radical, physisorption onto the (11,0) SWCNT is preferred rather than chemisorption. The bond dissociation energies determined for alkyl radicals and SWCNT follow the trend suggested by the consideration of radical stabilization energies. However, they are in disagreement with some degrees of functionalization observed in recent experiments. This discrepancy would stem from the fact that for some HiPco nanotubes, nonbonded interactions with alkyl radicals are stronger than covalent bonds.

  5. DNA minor groove targeted alkylating agents based on bisbenzimidazole carriers: synthesis, cytotoxicity and sequence-specificity of DNA alkylation.

    PubMed

    Smaill, J B; Fan, J Y; Denny, W A

    1998-12-01

    A series of bisbenzimidazoles bearing a variety of alkylating agents [ortho- and meta-mustards, imidazolebis(hydroxymethyl), imidazolebis(methylcarbamate) and pyrrolebis(hydroxymethyl)], appended by a propyl linker chain, were prepared and investigated for sequence-specificity of DNA alkylation and their cytotoxicity. Previous work has shown that, for para-aniline mustards, a propyl linker is optimal for cytotoxicity. Alkaline cleavage assays using a variety of different labelled oligonucleotides showed that the preferred sequences for adenine alkylation were 5'-TTTANANAANN and 5'-ATTANANAANN (underlined bases show the drug alkylation sites), with AT-rich sequences required on both the 5' and 3' sides of the alkylated adenine. The different aniline mustards showed little variation in alkylation pattern and similar efficiencies of DNA cross-link formation despite the changes in orientation and positioning of the mustard, suggesting that the propyl linker has some flexibility. The imidazole- and pyrrolebis(hydroxymethyl) alkylators showed no DNA strand cleavage following base treatment, indicating that no guanine or adenine N3 or N7 adducts were formed. Using the PCR-based polymerase stop assay, these alkylators showed PCR blocks at 5'-C*G sites (the * nucleotide indicates the blocked site), particularly at 5'-TAC*GA 5'-AGC*GGA, and 5'-AGCC*GGT sequences, caused by guanine 2-NH2 lesions on the opposite strand. Only the (more reactive) imidazolebis(methylcarbamoyl) and pyrrolebis(hydroxymethyl) alkylators demonstrated interstrand cross-linking ability. All of the bifunctional mustards showed large (approximately 100-fold) increases in cytotoxicity over chlorambucil, with the corresponding monofunctional mustards being 20- to 60-fold less cytotoxic. These results suggest that in the mustards the propyl linker provides sufficient flexibility to achieve delivery of the alkylator to favoured (adenine N3) sites in the minor groove, regardless of its exact geometry with

  6. X-Ray absorption spectroscopy investigation of 1-alkyl-3-methylimidazolium bromide salts

    SciTech Connect

    D'Angelo, Paola; Zitolo, Andrea; Migliorati, Valentina; Bodo, Enrico; Caminiti, Ruggero; Aquilanti, Giuliana; Hazemann, Jean Louis; Testemale, Denis; Mancini, Giordano

    2011-08-21

    X-ray absorption spectroscopy (XAS) has been used to unveil the bromide ion local coordination structure in 1-alkyl-3-methylimidazolium bromide [C{sub n}mim]Br ionic liquids (ILs) with different alkyl chains. The XAS spectrum of 1-ethyl-3-methylimidazolium bromide has been found to be different from those of the other members of the series, from the butyl to the decyl derivatives, that have all identical XAS spectra. This result indicates that starting from 1-buthyl-3-methylimidazolium bromide the local molecular arrangement around the bromide anion is the same independently from the length of the alkyl chain, and that the imidazolium head groups in the liquid ILs with long alkyl chains assume locally the same orientation as in the [C{sub 4}mim]Br crystal. With this study we show that the XAS technique is an effective direct tool for unveiling the local structural arrangements around selected atoms in ILs.

  7. V-shaped crystalline structures of di-n-alkyl esters of phosphoric acid.

    PubMed

    Thünemann, Andreas F; Kurth, Dirk G; Beinhoff, Matthias; Bienert, Ralf; Schulz, Burkhard

    2006-06-20

    We prepared crystals of di-n-alkyl esters of phosphoric acid with chain lengths of n = 10, 12, 14, 16, and 18. These were characterized by single-crystal X-ray analysis and differential scanning calorimetry (DSC). It was found that the alkyl chains are in an extended all-trans conformation and aligned close to perpendicular, forming V-shaped molecules. This is in strong contrast to the typical arrangement of the alkyl chains of phospholipids where the two alkyl chains are arranged parallel in the same direction (e.g., tuning fork configuration in bilayers). Additionally, it was found that the arrangement of the V-shaped molecules of the di-n-alkyl esters in neighboring stacks of the lamellar crystals is antiparallel for short chain lengths (n = 10 and 12) and parallel for the longer (n = 14 and 16). DSC reveals that the melting of the crystals increases systematically with increasing chain lengths from 48 to 82 degrees C. The contribution of each methylene group to the melting enthalpy (70-133 kJ/mol) is independent of the chain length (3.9 kJ per mol CH2).

  8. Friedel-crafts alkylation of benzene by normal omega-chloroalkanoic acids and their methyl esters and nitriles

    SciTech Connect

    Zakharkin, L.I.; Anikina, E.V.

    1987-08-20

    In the Friedel-Crafts alkylation of benzene by normal 1-haloalkanes with three or more carbon atoms a mixture of phenylalkanes forms, due to isomerization of the alkyl chain and migration of a hydrogen atoms. Under analogous conditions the alkylation of benzene by omega-chloroalkanoic acids, Cl(CH/sub 2/)/sub n/COOH, and omega-bromoalkanonitriles proceeds with isomerization of the alkyl chain, but beginning only with 6-chlorohexanoic acid and 6-bromohexanonitrile. Such a difference in the behavior of these halogen derivatives has not received a convincing explanation, although the mechanism of Friedel-Crafts alkylation of benzene should be the same in the two cases. For a better understanding of this difference, this work presents a systematic study of benzene alkylation by 4-chlorobutyric, 5-chlorovaleric, 6-chlorohexanoic, and 7-chloroheptanoic acids and their methyl esters and nitriles, and by ..gamma..-butyro- and delta-valerolactones. The catalyst was crystalline AlCl/sub 3/ twice sublimed from Mg. For comparison, alkylation with the respective 1-chloroalkanes was carried out. In the alkylation of benzene by omega-chloroalkanoic acids Cl(CH/sub 2/)/sub n/COOH (where n = 3-6) and their methyl esters and nitriles, in the presence of AlCl/sub 3/, the degree of isomerization of the alkyl chain is less than with the corresponding 1-chloroalkanes, depending on the increase in electron acceptor activity in the sequence HOOC- > CH/sub 3/OCO- > CN-.

  9. Antibacterial activity of alkyl gallates is a combination of direct targeting of FtsZ and permeabilization of bacterial membranes

    PubMed Central

    Król, Ewa; de Sousa Borges, Anabela; da Silva, Isabel; Polaquini, Carlos R.; Regasini, Luis O.; Ferreira, Henrique; Scheffers, Dirk-Jan

    2015-01-01

    Alkyl gallates are compounds with reported antibacterial activity. One of the modes of action is binding of the alkyl gallates to the bacterial membrane and interference with membrane integrity. However, alkyl gallates also cause cell elongation and disruption of cell division in the important plant pathogen Xanthomonas citri subsp. citri, suggesting that cell division proteins may be targeted by alkyl gallates. Here, we use Bacillus subtilis and purified B. subtilis FtsZ to demonstrate that FtsZ is a direct target of alkyl gallates. Alkyl gallates disrupt the FtsZ-ring in vivo, and cause cell elongation. In vitro, alkyl gallates bind with high affinity to FtsZ, causing it to cluster and lose its capacity to polymerize. The activities of a homologous series of alkyl gallates with alkyl side chain lengths ranging from five to eight carbons (C5–C8) were compared and heptyl gallate was found to be the most potent FtsZ inhibitor. Next to the direct effect on FtsZ, alkyl gallates also target B. subtilis membrane integrity—however the observed anti-FtsZ activity is not a secondary effect of the disruption of membrane integrity. We propose that both modes of action, membrane disruption and anti-FtsZ activity, contribute to the antibacterial activity of the alkyl gallates. We propose that heptyl gallate is a promising hit for the further development of antibacterials that specifically target FtsZ. PMID:25972861

  10. Microbial degradation of n-alkyl tetrahydrothiophenes found in petroleum.

    PubMed Central

    Fedorak, P M; Payzant, J D; Montgomery, D S; Westlake, D W

    1988-01-01

    Although n-alkyl-substituted tetrahydrothiophenes are found in nonbiodegraded petroleums, they are not found in petroleums which have undergone biodegradation in their reservoirs. These observations suggested that this group of compounds with alkyl chain lengths from approximately C10 to at least C30 is biodegradable. Two of these sulfides, 2-n-dodecyltetrahydrothiophene (DTHT) and 2-n-undecyltetrahydrothiophene, were synthesized, and their biodegradabilities were tested by using five gram-positive, n-alkane-degrading bacterial isolates. The alkyl side chains of these compounds were oxidized, and the major intermediates found in 2-n-undecyltetrahydrothiophene- and DTHT-metabolizing cultures were 2-tetrahydrothiophenecarboxylic acid (THTC) and 2-tetrahydrothiopheneacetic acid (THTA), respectively. Four n-alkane-degrading fungi were also shown to degrade DTHT, yielding both THTA and THTC. Quantitation of tetrahydrothiophene ring-containing products in 28-day-old bacterial and fungal cultures suggested that THTC and THTA were metabolized further to unidentified products. In addition, two of the bacterial isolates were shown to degrade a mixture of n-alkyl tetrahydrothiophenes isolated from Bellshill Lake crude oil. PMID:3389816

  11. Panchromatic Sensitizer for Dye-Sensitized Solar Cells: Unsymmetrical Squaraine Dyes Incorporating Benzodithiophene π-Spacer with Alkyl Chains to Extend Conjugation, Control the Dye Assembly on TiO2, and Retard Charge Recombination.

    PubMed

    Bisht, Rajesh; M K, Munavvar Fairoos; Singh, Ambarish Kumar; Nithyanandhan, Jayaraj

    2017-02-17

    Metal-free near-infrared (NIR) active unsymmetrical squaraine dyes, RSQ1 and RSQ2, with benzodithiophene (BDT) π-spacer and cyanoacrylic acid acceptor were synthesized by utilizing palladium catalyzed direct (hetero)arylation reaction. Methyl and 2-ethylhexyl groups were strategically placed at the BDT unit for RSQ1 and RSQ2, respectively, to investigate the effect of alkylated π-spacer on dye aggregation on the TiO2 surface and recombination reactions at TiO2/dye/electrolyte interface. These dyes have strong absorption (ε > 10(5) M(-1) cm(-1)) in near-infrared (NIR) region and exhibit similar optical and electrochemical properties as they have same conjugated framework. RSQ2 performed better than RSQ1 owing to its higher open-circuit voltage (Voc) and fill factor (ff) in spite of having comparable short-circuit current density (Jsc). The panchromatic incident photon-to-current conversion efficiency (IPCE) response was also observed for both the dyes. RSQ2 showed power conversion efficiency (PCE) of 6.72% with short-circuit current density (Jsc) of 18.53 mA/cm(2), open circuit voltage (Voc) of 0.538 V, and fill factor (ff) of 67.4%, without any coadsorbent. Attenuation of the charge recombination for RSQ2 was revealed by electrochemical impedance analysis (EIS) and open-circuit potential decay transients (OCVD), which attributes to its higher Voc and ff in comparison to RSQ1.

  12. From Broad-Spectrum Biocides to Quorum Sensing Disruptors and Mussel Repellents: Antifouling Profile of Alkyl Triphenylphosphonium Salts

    PubMed Central

    Martín-Rodríguez, Alberto J.; Babarro, Jose M. F.; Lahoz, Fernando; Sansón, Marta; Martín, Víctor S.; Norte, Manuel; Fernández, José J.

    2015-01-01

    ‘Onium’ compounds, including ammonium and phosphonium salts, have been employed as antiseptics and disinfectants. These cationic biocides have been incorporated into multiple materials, principally to avoid bacterial attachment. In this work, we selected 20 alkyl-triphenylphosphonium salts, differing mainly in the length and functionalization of their alkyl chains, in fulfilment of two main objectives: 1) to provide a comprehensive evaluation of the antifouling profile of these molecules with relevant marine fouling organisms; and 2) to shed new light on their potential applications, beyond their classic use as broad-spectrum biocides. In this regard, we demonstrate for the first time that these compounds are also able to act as non-toxic quorum sensing disruptors in two different bacterial models (Chromobacterium violaceum and Vibrio harveyi) as well as repellents in the mussel Mytilus galloprovincialis. In addition, their inhibitory activity on a fouling-relevant enzymatic model (tyrosinase) is characterized. An analysis of the structure-activity relationships of these compounds for antifouling purposes is provided, which may result useful in the design of targeted antifouling solutions with these molecules. Altogether, the findings reported herein provide a different perspective on the biological activities of phosphonium compounds that is particularly focused on, but, as the reader will realize, is not limited to their use as antifouling agents. PMID:25897858

  13. From broad-spectrum biocides to quorum sensing disruptors and mussel repellents: antifouling profile of alkyl triphenylphosphonium salts.

    PubMed

    Martín-Rodríguez, Alberto J; Babarro, Jose M F; Lahoz, Fernando; Sansón, Marta; Martín, Víctor S; Norte, Manuel; Fernández, José J

    2015-01-01

    'Onium' compounds, including ammonium and phosphonium salts, have been employed as antiseptics and disinfectants. These cationic biocides have been incorporated into multiple materials, principally to avoid bacterial attachment. In this work, we selected 20 alkyl-triphenylphosphonium salts, differing mainly in the length and functionalization of their alkyl chains, in fulfilment of two main objectives: 1) to provide a comprehensive evaluation of the antifouling profile of these molecules with relevant marine fouling organisms; and 2) to shed new light on their potential applications, beyond their classic use as broad-spectrum biocides. In this regard, we demonstrate for the first time that these compounds are also able to act as non-toxic quorum sensing disruptors in two different bacterial models (Chromobacterium violaceum and Vibrio harveyi) as well as repellents in the mussel Mytilus galloprovincialis. In addition, their inhibitory activity on a fouling-relevant enzymatic model (tyrosinase) is characterized. An analysis of the structure-activity relationships of these compounds for antifouling purposes is provided, which may result useful in the design of targeted antifouling solutions with these molecules. Altogether, the findings reported herein provide a different perspective on the biological activities of phosphonium compounds that is particularly focused on, but, as the reader will realize, is not limited to their use as antifouling agents.

  14. Alkylation of 2- and 3-alkoxycarbonyl-4-quinolinones. DFT study on the regioselectivity

    NASA Astrophysics Data System (ADS)

    Shmidt, María S.; Arroyo Mañez, Pau; Stortz, Carlos A.; Perillo, Isabel A.; Vega, Daniel; Blanco, María M.

    2017-01-01

    The reaction of 2-alkoxycarbonyl-4-quinolinones (1) with a variety of alkylating reagents under different conditions, lead to the corresponding O-alkylated products. The behavior in basic medium of compounds 1 differs from the 3-alkoxycarbonyl-4-quinolinones (4) isomers suggesting that the position of the carboxylate group determines the regioselectivity of the reaction. DFT calculations allow us to conclude that for 3-alkoxycarbonyl-4-quinolinones, the N-alkylation would be thermodynamically and kinetically favored. But for 2-alkoxycarbonyl-4-quinolinones the side chain in the 2-position of the ring prevents the planar approximation to the contiguous heteroatom leading to a more favorable O-alkylation transition state. Crystal structure of an O-alkylated product is determined by single crystal X-ray diffractometry.

  15. Mild Catalytic methods for Alkyl-Alkyl Bond Formation

    SciTech Connect

    Vicic, David A

    2009-08-10

    Overview of Research Goals and Accomplishments for the Period 07/01/06 – 06/30/07: Our overall research goal is to transform the rapidly emerging synthetic chemistry involving alkyl-alkyl cross-couplings into more of a mechanism-based field so that that new, rationally-designed catalysts can be performed under energy efficient conditions. Our specific objectives for the previous year were 1) to obtain a proper electronic description of an active catalyst for alkyl-alkyl cross-coupling reactions and 2) to determine the effect of ligand structure on the rate, scope, selectivity, and functional group compatibility of C(sp3)-C(sp3) cross-coupling catalysis. We have completed both of these initial objectives and established a firm base for further studies. The specific significant achievements of the current grant period include: 1) we have performed magnetic and computational studies on (terpyridine)NiMe, an active catalyst for alkyl-alkyl cross couplings, and have discovered that the unpaired electron resides heavily on the terpyridine ligand and that the proper electronic description of this nickel complex is a Ni(II)-methyl cation bound to a reduced terpyridine ligand; 2) we have for the first time shown that alkyl halide reduction by terpyridyl nickel catalysts is substantially ligand based; 3) we have shown by isotopic labeling studies that the active catalyst (terpyridine)NiMe is not produced via a mechanism that involves the formation of methyl radicals when (TMEDA)NiMe2 is used as the catalyst precursor; 4) we have performed an extensive ligand survey for the alkyl-alkyl cross-coupling reactions and have found that electronic factors only moderately influence reactivity in the terpyridine-based catalysis and that the most dramatic effects arise from steric and solubility factors; 5) we have found that the use of bis(dialkylphosphino)methanes as ligands for nickel does not produce active catalysts for cross-coupling but rather leads to bridging hydride

  16. N- and C-alkylation of seven-membered iminosugars generates potent glucocerebrosidase inhibitors and F508del-CFTR correctors.

    PubMed

    Désiré, J; Mondon, M; Fontelle, N; Nakagawa, S; Hirokami, Y; Adachi, I; Iwaki, R; Fleet, G W J; Alonzi, D S; Twigg, G; Butters, T D; Bertrand, J; Cendret, V; Becq, F; Norez, C; Marrot, J; Kato, A; Blériot, Y

    2014-11-28

    The glycosidase inhibitory properties of synthetic C-alkyl and N-alkyl six-membered iminosugars have been extensively studied leading to therapeutic candidates. The related seven-membered iminocyclitols have been less examined despite the report of promising structures. Using an in house ring enlargement/C-alkylation as well as cross-metathesis methodologies as the key steps, we have undertaken the synthesis and biological evaluation of a library of fourteen 2C- and eight N-alkyl tetrahydroxylated azepanes starting from an easily available glucopyranose-derived azidolactol. Four, six, nine and twelve carbon atom alkyl chains have been introduced. The study of two distinct D-gluco and L-ido stereochemistries for the tetrol pattern as well as R and S configurations for the C-2 carbon bearing the C-alkyl chain is reported. We observed that C-alkylation of the L-ido tetrahydroxylated azepane converts it from an α-L-fucosidase to a β-glucosidase and β-galactosidase inhibitor while N-alkylation of the D-gluco iminosugar significantly improves its inhibition profile leading to potent β-glucosidase, β-galactosidase, α-L-rhamnosidase and β-glucuronidase inhibitors whatever the stereochemistry of the alkyl chain. Interestingly, the N-alkyl chain length usually parallels the azepane inhibitor potency as exemplified by the identification of a potent glucocerebrosidase inhibitor (Ki 1 μM) bearing a twelve carbon atom chain. Additionally, several C-alkyl azepanes demonstrated promising F508del-CFTR correction unlike the parent tetrahydroxyazepanes. None of the C-alkyl and N-alkyl azepanes did inhibit ER α-glucosidases I or II.

  17. Kinetic study of the anaerobic biodegradation of alkyl polyglucosides and the influence of their structural parameters.

    PubMed

    Ríos, Francisco; Fernández-Arteaga, Alejandro; Lechuga, Manuela; Jurado, Encarnación; Fernández-Serrano, Mercedes

    2016-05-01

    This paper reports a study of the anaerobic biodegradation of non-ionic surfactants alkyl polyglucosides applying the method by measurement of the biogas production in digested sludge. Three alkyl polyglucosides with different length alkyl chain and degree of polymerization of the glucose units were tested. The influence of their structural parameters was evaluated, and the characteristics parameters of the anaerobic biodegradation were determined. Results show that alkyl polyglucosides, at the standard initial concentration of 100 mgC L(-1), are not completely biodegradable in anaerobic conditions because they inhibit the biogas production. The alkyl polyglucoside having the shortest alkyl chain showed the fastest biodegradability and reached the higher percentage of final mineralization. The anaerobic process was well adjusted to a pseudo first-order equation using the carbon produced as gas during the test; also, kinetics parameters and a global rate constant for all the involved metabolic process were determined. This modeling is helpful to evaluate the biodegradation or the persistence of alkyl polyglucosides under anaerobic conditions in the environment and in the wastewater treatment.

  18. Metabolism of alkyl amines by the filamentous fungus Aspergillus versicolor.

    PubMed Central

    Lindley, N D

    1987-01-01

    A variety of monoalkyl-substituted amines were able to act as nitrogen sources for heterotrophically growing cultures of Aspergillus versicolor. Only amines whose alkyl chains were at least five carbon atoms long were capable of supporting significant growth in the absence of a separate carbon substrate. However, biomass yields were significantly higher during growth on glucose-amine than on glucose-ammonia, indicating that some energy-generating dissimilation of the amine to CO2 took place. PMID:3566265

  19. Synthesis and Antioxidant Activity of Hydroxytyrosol Alkyl-Carbonate Derivatives.

    PubMed

    Fernandez-Pastor, Ignacio; Fernandez-Hernandez, Antonia; Rivas, Francisco; Martinez, Antonio; Garcia-Granados, Andres; Parra, Andres

    2016-07-22

    Three procedures have been investigated for the isolation of tyrosol (1) and hydroxytyrosol (2) from a phenolic extract obtained from the solid residue of olive milling. These three methods, which facilitated the recovery of these phenols, were chemical or enzymatic acetylation, benzylation, and carbomethoxylation, and subsequent carbonylation or acetonation reactions. Several new lipophilic alkyl-carbonate derivatives of hydroxytyrosol have been synthesized, coupling the primary hydroxy group of this phenol, through a carbonate linker, using alcohols with different chain lengths. The antioxidant properties of these lipophilic derivatives have been evaluated by different methods and compared with free hydroxytyrosol (2) and also with the well-known antioxidants BHT and α-tocopherol. Three methods were used for the determination of this antioxidant activity: FRAP and ABTS assays, to test the antioxidant power in hydrophilic media, and the Rancimat test, to evaluate the antioxidant capacity in a lipophilic matrix. These new alkyl-carbonate derivatives of hydroxytyrosol enhanced the antioxidant activity of this natural phenol, with their antioxidant properties also being higher than those of the commercial antioxidants BHT and α-tocopherol. There was no clear influence of the side-chain length on the antioxidant properties of the alkyl-carbonate derivatives of 2, although the best results were achieved mainly by the compounds with a longer chain on the primary hydroxy group of this natural phenolic substance.

  20. Outlook for the U. S. alkylation industry

    SciTech Connect

    Felten, J.R.; Bradshaw, T.; McCarthy, K. )

    1994-01-01

    Alkylation has long been recognized in the refining industry as one of the best options to convert refinery olefins into valuable, clean, high octane blending components. In fact, refinery alkylation is a preferred source of blending stocks for reformulated gasoline. However, the hydrofluoric acid (HF) alkylation process and, to a lesser extent, the sulfuric acid (SA) process have come under increasing pressure in the US due to safety and environmental concerns. This paper examines the current outlook for the US alkylation industry including: key trends and driving forces in the industry, the impact of environmental issues on both HF and SA alkylation, US alkylation supply/demand forecast including the outlook for oxygenates, how US refines will respond to the increased demand and restricted supply for alkylates, and the outlook for new solid acid alkylation (SAC) technology.

  1. Total synthesis of alkyl citrate natural products.

    PubMed

    Rizzacasa, Mark A; Sturgess, Dayna

    2014-03-07

    This review highlights the synthesis of members of the alkyl citrate family of natural products. The focus is on the stereoselective construction of the alkyl citrate moiety common to these compounds.

  2. Self-organization of surfactant molecules on solid surface: an STM study of sodium alkyl sulfonates [rapid communication

    NASA Astrophysics Data System (ADS)

    Yin, Xiu-Li; Wan, Li-Jun; Yang, Zheng-Yu; Yu, Jia-Yong

    2005-02-01

    Adsorption and self-organization of sodium alkyl sulfonates (STS and SHS) on HOPG have been studied by using in situ scanning tunneling microscopy (STM). Both SHS and STS molecules adsorb on HOPG surface and form long-range well-ordered monolayers. The molecular rows and the axes of alkyl chain of the molecules cross each other at angles of 60° and 90° in the STS and SHS layers, respectively. Molecular details such as sulfonate functional group (head) and alkyl chain are clearly imaged. The neighboring molecules in different rows form a "head to head" configuration. Structural models for the molecular arrangement of the two adlayers are proposed.

  3. Chichibabin-type direct alkylation of pyridyl alcohols with alkyl lithium reagents.

    PubMed

    Jeffrey, Jenna L; Sarpong, Richmond

    2012-11-02

    Direct C(6) alkylation of pyridyl alcohols can be achieved following an initial deprotonation of the hydroxy group. This transformation, which is believed to occur by a Chichibabin-type alkylation, avoids lateral deprotonation prior to pyridine ring alkylation and gives increased regioselectivity for C(6) over C(4) alkylation.

  4. Refiners discuss HF alkylation process and issues

    SciTech Connect

    Not Available

    1992-04-06

    Safety and oxygenate operations made HF alkylation a hot topic of discussion at the most recent National Petroleum Refiners Association annual question and answer session on refining and petrochemical technology. This paper provides answers to a variety of questions regarding the mechanical, process, and safety aspects of the HF alkylation process. Among the issues discussed were mitigation techniques, removal of oxygenates from alkylation unit feed, and amylene alkylation.

  5. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  6. Paternal Attachment, Parenting Beliefs and Children's Attachment

    ERIC Educational Resources Information Center

    Howard, Kimberly S.

    2010-01-01

    Relationships between fathers' romantic attachment style, parenting beliefs and father-child attachment security and dependence were examined in a diverse sample of 72 fathers of young children. Paternal romantic attachment style was coded based on fathers' endorsement of a particular style represented in the Hazan and Shaver Three-Category…

  7. Different hydrogen-bonded chains in the crystal structures of three alkyl N-[(E)-1-(2-benzyl­idene-1-methyl­hydrazin­yl)-3-hy­droxy-1-oxopropan-2-yl]carbamates

    PubMed Central

    Noguiera, Thais C. M.; Pinheiro, Alessandra C.; Wardell, James L.; de Souza, Marcus V. N.; Abberley, Jordan P.; Harrison, William T. A.

    2015-01-01

    The crystal structures of three methyl­ated hydrazine carbamate derivatives prepared by multi-step syntheses from l-serine are presented, namely benzyl N-{(E)-1-[2-(4-cyanobenzylidene)-1-methylhydrazinyl]-3-hydroxy-1-oxopro­pan-2-yl}carbamate, C20H20N4O4, tert-butyl N-{(E)-1-[2-(4-cyanobenzylidene)-1-methylhydrazinyl]-3-hydroxy-1-oxopropan-2-yl}carbamate, C17H22N4O4, and tert-butyl N-[(E)-1-(2-benzylidene-1-methylhydrazinyl)-3-hydroxy-1-oxopro­pan-2-yl]carbamate, C16H23N3O4. One of them shows that an unexpected racemization has occurred during the mild-condition methyl­ation reaction. In each crystal structure, the mol­ecules are linked into chains by O—H⋯O hydrogen bonds, but with significant differences between them. PMID:26279859

  8. Microbial Degradation and Assimilation of n-Alkyl-Substituted Cycloparaffins1

    PubMed Central

    Beam, H. W.; Perry, J. J.

    1974-01-01

    Studies were conducted on the oxidation and assimilation of n-alkyl-substituted cycloalkane substrates by several hydrocarbon-utilizing microorganisms. These microorganisms utilized heptadecylcyclohexane and dodecylcyclohexane as the sole source of carbon and energy. Neither methylcyclohexane nor ethylcyclohexane was utilized as a growth substrate by any organisms tested. Gas-liquid chromatographic analyses of fatty acids present in cells after growth on dodecylcyclohexane confirm direct incorporation of both alpha- and beta-oxidation products. Growth patterns of these organisms on n-alkyl-substituted cyclohexane fatty acids of varying chain lengths suggest a greater probability of ring cleavage when the side chain contains an odd number of carbons. PMID:4597441

  9. Synthesis, Thermal Properties and Cytotoxicity Evaluation of Hydrocarbon and Fluorocarbon Alkyl β-D-xylopyranoside Surfactants

    PubMed Central

    Xu, Wenjin; Osei-Prempeh, Gifty; Lema Herrera, Fresia C.; Oldham, E. Davis; Aguilera, Renato J.; Parkin, Sean; Rankin, Stephen E.; Knutson, Barbara L.; Lehmler, Hans-Joachim

    2011-01-01

    Alkyl β-D-xylopyranosides are highly surface active, biodegradable surfactants that can be prepared from hemicelluloses and are of interest for use as pharmaceuticals, detergents, agrochemicals and personal care products. To gain further insights into their structure-property and structure-activity relationships, the present study synthesized a series of hydrocarbon (-C6H13 to -C16H33) and fluorocarbon (-(CH2)2C6F13) alkyl β-D-xylopyranosides in four steps from D-xylose by acylation or benzoylation, bromination, Koenigs-Knorr reaction and hydrolysis, with the benzoyl protecting group giving better yields compared to the acyl group in the Koenigs-Knorr reaction. All alkyl β-D-xylopyranosides formed thermotropic liquid crystals. The phase transition of the solid crystalline phase to a liquid crystalline phase increased linearly with the length of the hydrophobic tail. The clearing points were near constant for alkyl β-D-xylopyranosides with a hydrophobic tail ≥ 8, but occurred at a significantly lower temperature for hexyl β-D-xylopyranoside. Short and long-chain alkyl β-D-xylopyranosides displayed no cytotoxicity at concentration below their aqueous solubility limit. Hydrocarbon and fluorocarbon alkyl β-D-xylopyranosides with intermediate chain length displayed some toxicity at millimolar concentrations due to apoptosis. PMID:22207000

  10. Levels and pattern of alkyl nitrates, multifunctional alkyl nitrates, and halocarbons in the air over the Atlantic Ocean

    NASA Astrophysics Data System (ADS)

    Fischer, Ralf G.; Kastler, Jürgen; Ballschmiter, Karlheinz

    2000-06-01

    The Albatross Campaign was a research cruise of the German research vessel RV Polarstern (cruise ANT XFV/1) in October and November 1996 across the Atlantic Ocean. The cruise started in Bremerhaven, Germany, reached the polar region at 67°N, followed the 30°W meridian longitude, crossed the equatorial region, and ended at 50°S at Punta Quilla, Argentina. A second cruise leg closer to the African continent started from Capetown, South Africa, passed the Canary Island, and ended through the English Channel at Bremerhaven, Germany, in May/June 1998. Measurements of atmospheric levels of C1-C13 alkyl mononitrates, 24 alkyl dinitrates (C3-C6), 19 hydroxy alkyl nitrates (C2-C6), and benzyl nitrate, as well as the halocarbons tetrachloroethene, hexachloroethane, and bromoform are presented in this work. The halocarbons are used to assess the origin of the air parcels analyzed. Levels and patterns of multifunctional alkyl nitrates in the marine air are described here for the first time. The air masses include polluted air from the northern Europe, as well as highly degraded air masses of the South Atlantic trade wind region that represent global baseline levels. Two independent analytical methods were used in combination to cover the whole range of organic nitrates. First, the low-volume adsorptive enrichment of organic traces on Tenax, followed by thermodesorption cold trap HRGC-ECD and thermodesorption cold trap HRGC-(EI)MSD was used. Second, high-volume adsorptive enrichment of organic traces on silica gel was applied followed by solvent desorption, NP-HPLC group separation, and HRGC-(EI)-MSD. Short-chain alkyl nitrates (C4-C6) showed mixing ratios in the range of 0.2-2.5 parts per trillion by volume (pptv), with a local minimum for the tropical regions and significantly lower ratios for the Southern Hemisphere. The mixing ratio of the sum of 36 long-chain alkyl mononitrates (C7-C13) ranged from 0.02-0.43 pptv, the mixing ratio of the sum of 23 alkyl dinitrates (C3-C

  11. Bacteria-driven production of alkyl nitrates in seawater

    NASA Astrophysics Data System (ADS)

    Kim, Michelle J.; Michaud, Jennifer M.; Williams, Renee; Sherwood, Byron Pedler; Pomeroy, Robert; Azam, Farooq; Burkart, Michael; Bertram, Timothy H.

    2015-01-01

    and ship-borne measurements have shown that the ocean is a large, diffuse source for short chain (C1-C3) gas phase alkyl nitrates (RONO2). Photochemical production of RONO2 has been demonstrated previously as a viable mechanism in surface waters; however, it cannot account for the observed depth profile of RONO2, suggesting an additional, dark RONO2 production mechanism. We present measurements of gas phase C1-C5 alkyl nitrates emitted from seawater in a controlled mesocosm experiment conducted under low-light conditions in a glass-walled wave channel. Ethyl and butyl nitrate emission rates from seawater are strongly correlated with the abundance of heterotrophic bacteria (R2 ≥ 0.89) and show no correlation to chlorophyll a concentration. Controlled flask experiments conducted using ambient and sterile seawater, inoculated with a heterotrophic bacterium, confirm that bacterial driven production of select RONO2 can proceed efficiently in the absence of light.

  12. Methods of making alkyl esters

    DOEpatents

    Elliott, Brian

    2010-08-03

    A method comprising contacting an alcohol, a feed comprising one or more glycerides and equal to or greater than 2 wt % of one or more free fatty acids, and a solid acid catalyst, a nanostructured polymer catalyst, or a sulfated zirconia catalyst in one or more reactors, and recovering from the one or more reactors an effluent comprising equal to or greater than about 75 wt % alkyl ester and equal to or less than about 5 wt % glyceride.

  13. PREPARATION OF ALKYL PYROPHOSPHATE EXTRACTANTS

    DOEpatents

    Levine, C.A.; Skiens, W.E.; Moore, G.R.

    1960-08-01

    A process for providing superior solvent extractants for metal recovery processes is given wherein the extractant comprises an alkyl pyrophosphoric acid ester dissolved in an organic solvent diluent. Finely divided solid P/sub 2/O/ sub 5/ is slurried in an organic solvent-diluent selected from organic solvents such as kerosene, benzene, chlorobenzene, toluene, etc. An alcohol selected from the higher alcohols having 4 to 17 carbon atoms. e.g.. hexanol-1. heptanol-3, octanol-1. 2.6-dimethyl-heptanol-4, and decanol-1, is rapidly added to the P/sub 2/O/sub 5/ slurry in the amount of about 2 moles of alcohol to 1 mole of P/sub 2/ O/sub 5/. The temperature is maintained below about 110 deg C during the course of the P/sub 2/O/sub 5/-alcohol reaction. An alkyl pyrophosphate extractant compound is formed as a consequence of the reaction process. The alkyl pyrophosphate solvent-diluent extractant phase is useful in solvent extraction metal recovery processes.

  14. Iron-Catalyzed Decarboxylative Alkyl Etherification of Vinylarenes with Aliphatic Acids as the Alkyl Source.

    PubMed

    Jian, Wujun; Ge, Liang; Jiao, Yihang; Qian, Bo; Bao, Hongli

    2017-03-20

    Because of the lack of effective alkylating reagents, alkyl etherification of olefins with general alkyl groups has not been previously reported. In this work, a variety of alkyl diacyl peroxides and peresters generated from aliphatic acids have been found to enable the first iron-catalyzed alkyl etherification of olefins with general alkyl groups. Primary, secondary and tertiary aliphatic acids are suitable for this reaction, delivering products with yields up to 97 %. Primary and secondary alcohols react well, affording products in up to 91 % yield.

  15. Effects of quaternary ammonium chain length on antibacterial bonding agents.

    PubMed

    Li, F; Weir, M D; Xu, H H K

    2013-10-01

    The objectives of this study were to synthesize new quaternary ammonium methacrylates (QAMs) with systematically varied alkyl chain lengths (CL) and to investigate, for the first time, the CL effects on antibacterial efficacy, cytotoxicity, and dentin bond strength of bonding agents. QAMs were synthesized with CL of 3 to 18 and incorporated into Scotchbond Multi-Purpose (SBMP) bonding agent. The cured resins were inoculated with Streptococcus mutans. Bacterial early attachment was investigated at 4 hrs. Biofilm colony-forming units (CFU) were measured after 2 days. With CL increasing from 3 to 16, the minimum inhibitory concentration and minimum bactericidal concentration were decreased by 5 orders of magnitude. Incorporating QAMs into SBMP reduced bacterial early attachment, with the least colonization at CL = 16. Biofilm CFU for CL = 16 was 4 log lower than SBMP control (p < .05). All groups had similar dentin bond strengths (p > .1). The new antibacterial materials had fibroblast/odontoblast viability similar to that of commercial controls. In conclusion, increasing the chain length of new QAMs in bonding agents greatly increased the antibacterial efficacy. A reduction in Streptococcus mutans biofilm CFU by 4 log could be achieved, without compromising bond strength and cytotoxicity. New QAM-containing bonding agents are promising for a wide range of restorations to inhibit biofilms.

  16. Effects of Quaternary Ammonium Chain Length on Antibacterial Bonding Agents

    PubMed Central

    Li, F.; Weir, M.D.; Xu, H.H.K.

    2013-01-01

    The objectives of this study were to synthesize new quaternary ammonium methacrylates (QAMs) with systematically varied alkyl chain lengths (CL) and to investigate, for the first time, the CL effects on antibacterial efficacy, cytotoxicity, and dentin bond strength of bonding agents. QAMs were synthesized with CL of 3 to 18 and incorporated into Scotchbond Multi-Purpose (SBMP) bonding agent. The cured resins were inoculated with Streptococcus mutans. Bacterial early attachment was investigated at 4 hrs. Biofilm colony-forming units (CFU) were measured after 2 days. With CL increasing from 3 to 16, the minimum inhibitory concentration and minimum bactericidal concentration were decreased by 5 orders of magnitude. Incorporating QAMs into SBMP reduced bacterial early attachment, with the least colonization at CL = 16. Biofilm CFU for CL = 16 was 4 log lower than SBMP control (p < .05). All groups had similar dentin bond strengths (p > .1). The new antibacterial materials had fibroblast/odontoblast viability similar to that of commercial controls. In conclusion, increasing the chain length of new QAMs in bonding agents greatly increased the antibacterial efficacy. A reduction in Streptococcus mutans biofilm CFU by 4 log could be achieved, without compromising bond strength and cytotoxicity. New QAM-containing bonding agents are promising for a wide range of restorations to inhibit biofilms. PMID:23958761

  17. Alkylation of human hair keratin for tunable hydrogel erosion and drug delivery in tissue engineering applications.

    PubMed

    Han, Sangheon; Ham, Trevor R; Haque, Salma; Sparks, Jessica L; Saul, Justin M

    2015-09-01

    Polymeric biomaterials that provide a matrix for cell attachment and proliferation while achieving delivery of therapeutic agents are an important component of tissue engineering and regenerative medicine strategies. Keratins are a class of proteins that have received attention for numerous tissue engineering applications because, like other natural polymers, they promote favorable cell interactions and have non-toxic degradation products. Keratins can be extracted from various sources including human hair, and they are characterized by a high percentage of cysteine residues. Thiol groups on reductively extracted keratin (kerateine) form disulfide bonds, providing a more stable cross-linked hydrogel network than oxidatively extracted keratin (keratose) that cannot form disulfide crosslinks. We hypothesized that an iodoacetamide alkylation (or "capping") of cysteine thiol groups on the kerateine form of keratin could be used as a simple method to modulate the levels of disulfide crosslinking in keratin hydrogels, providing tunable rates of gel erosion and therapeutic agent release. After alkylation, the alkylated kerateines still formed hydrogels and the alkylation led to changes in the mechanical and visco-elastic properties of the materials consistent with loss of disulfide crosslinking. The alkylated kerateines did not lead to toxicity in MC3T3-E1 pre-osteoblasts. These cells adhered to keratin at levels comparable to fibronectin and greater than collagen. Alkylated kerateine gels eroded more rapidly than non-alkylated kerateine and this control over erosion led to tunable rates of delivery of rhBMP-2, rhIGF-1, and ciprofloxacin. These results demonstrate that alkylation of kerateine cysteine residues provides a cell-compatible approach to tune rates of hydrogel erosion and therapeutic agent release within the context of a naturally-derived polymeric system.

  18. The distribution of toluene in intercalation complexes of a vermiculite and alkyl trimethylammonium bromides.

    PubMed

    Williams-Daryn, S; Thomas, R K; Castro, M A; Becerro, A I

    2003-11-15

    Neutron diffraction and isotopic labeling have been used to determine the distribution of toluene sorbed into the interlamellar space of complexes of vermiculite with alkyl trimethylammonium bromide complex of alkyl chain lengths C(12), C(14), and C(16) and in a mixed C(12)/C(16) complex. The toluene remains in a liquid-like form and fills and swells the interlamellar space space up to a point where there remains a small amount of overlap of the alkyl chains of the surfactant. If the complex is between vermiculite and one surfactant only this results in the toluene concentration being reduced in the center of the interlamellar space, with maxima on either side. On the other hand, in a complex of mixed-length surfactants, the toluene distribution reaches its maximum at the center of the interlamellar space.

  19. Methods and Mechanisms for Cross-Electrophile Coupling of Csp2 Halides with Alkyl Electrophiles

    PubMed Central

    2016-01-01

    Conspectus Cross-electrophile coupling, the cross-coupling of two different electrophiles, avoids the need for preformed carbon nucleophiles, but development of general methods has lagged behind cross-coupling and C–H functionalization. A central reason for this slow development is the challenge of selectively coupling two substrates that are alike in reactivity. This Account describes the discovery of generally cross-selective reactions of aryl halides and acyl halides with alkyl halides, the mechanistic studies that illuminated the underlying principles of these reactions, and the use of these fundamental principles in the rational design of new cross-electrophile coupling reactions. Although the coupling of two different electrophiles under reducing conditions often leads primarily to symmetric dimers, the subtle differences in reactivity of aryl halides and alkyl halides with nickel catalysts allowed for generally cross-selective coupling reactions. These conditions could also be extended to the coupling of acyl halides with alkyl halides. These reactions are exceptionally functional group tolerant and can be assembled on the benchtop. A combination of stoichiometric and catalytic studies on the mechanism of these reactions revealed an unusual radical-chain mechanism and suggests that selectivity arises from (1) the preference of nickel(0) for oxidative addition to aryl halides and acyl halides over alkyl halides and (2) the greater propensity of alkyl halides to form free radicals. Bipyridine-ligated arylnickel intermediates react with alkyl radicals to efficiently form, after reductive elimination, new C–C bonds. Finally, the resulting nickel(I) species is proposed to regenerate an alkyl radical to carry the chain. Examples of new reactions designed using these principles include carbonylative coupling of aryl halides with alkyl halides to form ketones, arylation of epoxides to form β-aryl alcohols, and coupling of benzyl sulfonate esters with aryl

  20. Bimetallic oxidative addition involving radical intermediates in nickel-catalyzed alkyl-alkyl Kumada coupling reactions.

    PubMed

    Breitenfeld, Jan; Ruiz, Jesus; Wodrich, Matthew D; Hu, Xile

    2013-08-14

    Many nickel-based catalysts have been reported for cross-coupling reactions of nonactivated alkyl halides. The mechanistic understanding of these reactions is still primitive. Here we report a mechanistic study of alkyl-alkyl Kumada coupling catalyzed by a preformed nickel(II) pincer complex ([(N2N)Ni-Cl]). The coupling proceeds through a radical process, involving two nickel centers for the oxidative addition of alkyl halide. The catalysis is second-order in Grignard reagent, first-order in catalyst, and zero-order in alkyl halide. A transient species, [(N2N)Ni-alkyl(2)](alkyl(2)-MgCl), is identified as the key intermediate responsible for the activation of alkyl halide, the formation of which is the turnover-determining step of the catalysis.

  1. Reactions of Tributylstannyl Anioniods with Alkyl Bromides.

    DTIC Science & Technology

    1981-09-28

    g (12 mmol) of cesium tert-butoxide was added to the reaction vessel before the addition of n-butyllithium. Alkylation of Tributylstannyl Anionoids...Dry reaction vessels were purged with argon. The desired alkyl halide (1.0 mmol unless noted) and any desired additive were added to the reaction ...OFFICE OF NAVAL RESEARCH Contract N00014-79-C-0584 Task No. NR 053-714 TECHNICAL REPORT No. 2 Reactions of Tributylstannyl Anionoids with Alkyl

  2. Sequence-selective single-molecule alkylation with a pyrrole-imidazole polyamide visualized in a DNA nanoscaffold.

    PubMed

    Yoshidome, Tomofumi; Endo, Masayuki; Kashiwazaki, Gengo; Hidaka, Kumi; Bando, Toshikazu; Sugiyama, Hiroshi

    2012-03-14

    We demonstrate a novel strategy for visualizing sequence-selective alkylation of target double-stranded DNA (dsDNA) using a synthetic pyrrole-imidazole (PI) polyamide in a designed DNA origami scaffold. Doubly functionalized PI polyamide was designed by introduction of an alkylating agent 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI) and biotin for sequence-selective alkylation at the target sequence and subsequent streptavidin labeling, respectively. Selective alkylation of the target site in the substrate DNA was observed by analysis using sequencing gel electrophoresis. For the single-molecule observation of the alkylation by functionalized PI polyamide using atomic force microscopy (AFM), the target position in the dsDNA (∼200 base pairs) was alkylated and then visualized by labeling with streptavidin. Newly designed DNA origami scaffold named "five-well DNA frame" carrying five different dsDNA sequences in its cavities was used for the detailed analysis of the sequence-selectivity and alkylation. The 64-mer dsDNAs were introduced to five individual wells, in which target sequence AGTXCCA/TGGYACT (XY = AT, TA, GC, CG) was employed as fully matched (X = G) and one-base mismatched (X = A, T, C) sequences. The fully matched sequence was alkylated with 88% selectivity over other mismatched sequences. In addition, the PI polyamide failed to attach to the target sequence lacking the alkylation site after washing and streptavidin treatment. Therefore, the PI polyamide discriminated the one mismatched nucleotide at the single-molecule level, and alkylation anchored the PI polyamide to the target dsDNA.

  3. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... esters (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  4. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... esters (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  5. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... esters (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  6. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... esters (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  7. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... alkyl esters (generic name). 721.1875 Section 721.1875 Protection of Environment ENVIRONMENTAL... esters (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  8. Alkyl nitrate photochemistry during the tropospheric organic chemistry experiment

    NASA Astrophysics Data System (ADS)

    Worton, David R.; Reeves, Claire E.; Penkett, Stuart A.; Sturges, William T.; Slemr, Jana; Oram, David E.; Bandy, Brian J.; Bloss, William J.; Carslaw, Nicola; Davey, James; Emmerson, Kathryn M.; Gravestock, Thomas J.; Hamilton, Jacqueline F.; Heard, Dwayne E.; Hopkins, James R.; Hulse, Anne; Ingram, Trevor; Jacob, Mark J.; Lee, James D.; Leigh, Roland J.; Lewis, Alastair C.; Monks, Paul S.; Smith, Shona C.

    2010-02-01

    Alkyl nitrates (C 1-C 5) were measured at two sites (near urban and rural) in southeast England during the Tropospheric Organic Chemistry Experiment (TORCH). Methyl nitrate was the dominant species during both campaigns accounting for on average about one third of the total measured alkyl nitrates. High mixing ratios (>50 pptv) and variability of methyl nitrate were observed at the near urban site (TORCH1) that were not seen at the rural site (TORCH2) and which could not be explained by local photochemical production or direct emissions. The diurnal variation of methyl nitrate during TORCH1 showed a morning maximum that would be consistent with nighttime chemistry followed by transport to the surface by boundary layer dynamics. Similarly, elevated morning mixing ratios were also observed during TORCH2 although the magnitudes were much smaller. As a result, methyl nitrate could represent a tracer for nighttime chemistry seen at the ground the following day. At both campaigns, the dominant source of short chain alkyl nitrates and carbonyl precursor radicals (≤C 4) were from decomposition of larger compounds. The magnitude of the source increased with decreasing carbon number consistent with increasing total precursor abundance. Non-photochemical emissions of acetaldehyde and acetone could not be accounted for by automobile exhaust emissions alone and indicated that other direct sources are likely important in this environment.

  9. Separation and quantitative analysis of alkyl sulfate ethoxymers by HPLC.

    PubMed

    Morvan, Julien; Hubert-Roux, Marie; Agasse, Valérie; Cardinael, Pascal; Barbot, Florence; Decock, Gautier; Bouillon, Jean-Philippe

    2008-01-01

    Separation of alkyl sulfate ethoxymers is investigated on various high-performance liquid chromatography (HPLC) stationary phases: Acclaim C18 Surfactant, Surfactant C8, and Hypercarb. For a fixed alkyl chain length, ethoxymers are eluted in the order of increasing number of ethoxylated units on Acclaim C18 Surfactant, whereas a reversed elution order is observed on Surfactant C8 and Hypercarb. Moreover, on an Acclaim C18 Surfactant column, non-ethoxylated compounds are eluted in their ethoxymers distribution and the use of sodium acetate additive in mobile phase leads to a co-elution of ethoxymers. HPLC stationary phases dedicated to surfactants analysis are evaluated by means of the Tanaka test. Surfactant C8 presents a great silanol activity whereas Acclaim C18 Surfactant shows a high steric selectivity. For alkyl sulfates, linearity of the calibration curve and limits of detection and quantitation are evaluated. The amount of sodium laureth sulfate raw material found in commercial body product is in agreement with the specification of the manufacturer.

  10. The cytochrome P-450 active site. Regiospecificity of prosthetic heme alkylation by olefins and acetylenes.

    PubMed

    Kunze, K L; Mangold, B L; Wheeler, C; Beilan, H S; Ortiz de Montellano, P R

    1983-04-10

    Hepatic microsomal cytochrome P-450 from phenobarbital-pretreated rats is inactivated during the metabolism of linear olefins (ethylene, propene, and octene) and acetylenes (acetylene, propyne, and octyne). As expected from previous work, the inactivation is due to N-alkylation of the prosthetic heme group by the substrate. The N-alkyl group in each adduct is formally obtained by addition of a porphyrin nitrogen to the terminal carbon and of an oxygen atom (as a hydroxyl function) to the internal carbon of the pi-bond. The oxygen is shown here by 18O studies to be catalytically introduced by the enzyme. The olefins exclusively alkylate the nitrogen of pyrrole ring D, but the acetylenes alkylate that of pyrrole ring A. Acetylene is an exception in that it reacts with more than one nitrogen. Circular dichroism studies of the ethylene adduct and of the ring D regioisomer of N-ethylprotoporphyrin IX obtained by alkylation of the prosthetic heme of hemoglobin have been used to determine which face of cytochrome P-450 heme is alkylated by the unsaturated substrates. These results implicate an active site that is sterically encumbered in the region over pyrrole ring B and has a lipophilic binding site that accommodates chains of at least six carbon atoms over pyrrole ring C.

  11. S-alkylation of soft scorpionates.

    PubMed

    Rajasekharan-Nair, Rajeev; Moore, Dean; Chalmers, Kirsten; Wallace, Dawn; Diamond, Louise M; Darby, Lisa; Armstrong, David R; Reglinski, John; Spicer, Mark D

    2013-02-11

    The alkylation reactions of soft scorpionates are reported. The hydrotris(S-alkyl-methimazolyl)borate dications (alkyl = methyl, allyl, benzyl), which were prepared by the reaction of Tm(Me) anion and primary alkyl halides, have been isolated and structurally characterised. The reaction is, however, not universally successful. DFT analysis of these alkylation reactions (C=S versus B-H alkylation) indicates that the observed outcome is driven by kinetic factors. Extending the study to incorporate alternative imine thiones (mercaptobenzothiazole, bz; thiazoline, tz) led to the structural characterisation of di[aquo-μ-aquohydrotris(mercaptobenzothiazolyl)boratosodium], which contains sodium atoms in the κ(3)-S,S,S coordination mode. Alkylation of Na[Tbz] and Na[tzTtz] leads to decomposition resulting in the formation of the simple S-alkylated heterocycles. The analysis of the species involved in these reactions shows an inherent weakness in the B-N bond in soft scorpionates, which has implications for their use in more advanced chemistry.

  12. Occupational asthma due to alkyl cyanoacrylate

    SciTech Connect

    Nakazawa, T. )

    1990-08-01

    A case of bronchial asthma induced by occupational exposure to alkyl cyanoacrylate, an adhesive, occurred in an assembly operation. Provocative exposure testing induced immediate and delayed asthmatic responses. Alkyl cyanoacrylate seemed to act as an allergen or as an irritant, resulting in the development of asthma.

  13. Reductive alkylation and sequential reductive alkylation-click chemistry for on-solid-support modification of pyrrolidinyl peptide nucleic acid.

    PubMed

    Ditmangklo, Boonsong; Boonlua, Chalothorn; Suparpprom, Chaturong; Vilaivan, Tirayut

    2013-04-17

    A methodology for the site-specific attachment of fluorophores to the backbone of pyrrolidinyl peptide nucleic acids (PNAs) with an α/β-backbone derived from D-prolyl-(1S,2S)-2-aminocyclopentanecarboxylic acid (acpcPNA) has been developed. The strategy involves a postsynthetic reductive alkylation of the aldehyde-containing labels onto the acpcPNA that was previously modified with (3R,4S)-3-aminopyrrolidine-4-carboxylic acid on the solid support. The reductive alkylation reaction is remarkably efficient and compatible with a range of reactive functional groups including Fmoc-protected amino, azide, and alkynes. This allows further attachment of readily accessible carboxyl-, alkyne-, or azide-containing labels via amide bond formation or Cu-catalyzed azide-alkyne cycloaddition (CuAAC, also known as click chemistry). The label attached in this way does not negatively affect the affinity and specificity of the pairing of the acpcPNA to its DNA target. Applications of this methodology in creating self-reporting pyrene- and thiazole orange-labeled acpcPNA probes that can yield a change in fluorescence in response to the presence of the correct DNA target have also been explored. A strong fluorescence enhancement was observed with thiazole orange-labeled acpcPNA in the presence of DNA. The specificity could be further improved by enzymatic digestion with S1 nuclease, providing a 9- to 60-fold fluorescence enhancement with fully complementary DNA and a less than 3.5-fold enhancement with mismatched DNA targets.

  14. Belt attachment and system

    DOEpatents

    Schneider, Abraham D.; Davidson, Erick M.

    2016-02-02

    Disclosed herein is a belt assembly including a flexible belt with an improved belt attachment. The belt attachment includes two crossbars spaced along the length of the belt. The crossbars retain bearings that allow predetermined movement in six degrees of freedom. The crossbars are connected by a rigid body that attaches to the bearings. Implements that are attached to the rigid body are simply supported but restrained in pitching rotation.

  15. Attachment over Time.

    ERIC Educational Resources Information Center

    Lewis, Michael; Feiring, Candice; Rosenthal, Saul

    2000-01-01

    Examined continuity in attachment classification from infancy through adolescence and related it to autobiographical memories of childhood, divorce, and maladjustment in white middle-class children. Found no continuity in attachment classification from 1 to 18 years and no relation between infant attachment status and adolescent adjustment.…

  16. Computational investigation of the hydration of alkyl diammonium cations in water clusters

    NASA Astrophysics Data System (ADS)

    Jahangiri, Soran; Legris-Falardeau, Valéry; Peslherbe, Gilles H.

    2015-02-01

    The hydration behavior of α,ω-alkyl diammonium cations of varying alkyl chain length in water clusters has been investigated with molecular dynamics simulations. The OPLS force field was validated against high-level quantum-chemistry results and experimental data and subsequently used to describe the interatomic interactions in the simulations. The results were further validated with simulations performed with approximate density-functional theory (DFTB3). Surface solvation structures are found to be the most stable, accompanied by considerable ion conformational changes, especially in the case of longer dications. This work demonstrates that, depending on their structure, doubly charged cations may have a high affinity towards aqueous interfaces.

  17. HeI photoelectron spectroscopic studies on the electronic structure of alkyl nitrosamines

    NASA Astrophysics Data System (ADS)

    Jiang, Peng; Qian, Ximei; Li, Chunhui; Qiao, Chunhua; Wang, Dianxun

    1997-10-01

    HeI photoelectron spectroscopic (PES) studies on the electronic structure of alkyl nitrosamines R 2N 2O (R = CH 3-, CH 3CH 2-, and CH 3CH 2CH 2-) are reported. The assignment of the PES bands for this series of compounds has been made with the aid of the band shapes, the band intensity and ab initio SCF MO calculations based on the 631 ∗ G basis sets. Both PES experiment and the ab initio SCF MO calculations show that the detoxification ability of nitrosamine with longer alkyl chain is stronger.

  18. Charge properties and bacterial contact-killing of hyperbranched polyurea-polyethyleneimine coatings with various degrees of alkylation

    NASA Astrophysics Data System (ADS)

    Roest, Steven; van der Mei, Henny C.; Loontjens, Ton J. A.; Busscher, Henk J.

    2015-11-01

    Coatings of immobilized-quaternary-ammonium-ions (QUAT) uniquely kill adhering bacteria upon contact. QUAT-coatings require a minimal cationic-charge surface density for effective contact-killing of adhering bacteria of around 1014 cm-2. Quaternization of nitrogen is generally achieved through alkylation. Here, we investigate the contribution of additional alkylation with methyl-iodide to the cationic-charge density of hexyl-bromide alkylated, hyperbranched polyurea-polyethyleneimine coatings measuring charge density with fluorescein staining. X-ray-photoelectron-spectroscopy was used to determine the at.% alkylated-nitrogen. Also streaming potentials, water contact-angles and bacterial contact-killing were measured. Cationic-charge density increased with methyl-iodide alkylation times up to 18 h, accompanied by an increase in the at.% alkylated-nitrogen. Zeta-potentials became more negative upon alkylation as a result of shielding of cationiccharges by hydrophobic alkyl-chains. Contact-killing of Gram-positive Staphylococci only occurred when the cationic-charge density exceeded 1016 cm-2 and was carried by alkylated-nitrogen (electron-binding energy 401.3 eV). Gram-negative Escherichia coli was not killed upon contact with the coatings. There with this study reveals that cationic-charge density is neither appropriate nor sufficient to determine the ability of QUAT-coatings to kill adhering bacteria. Alternatively, the at.% of alkylated-nitrogen at 401.3 eV is proposed, as it reflects both cationic-charge and its carrier. The at.% N401.3 eV should be above 0.45 at.% for Gram-positive bacterial contact-killing.

  19. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.

    1989-07-18

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  20. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1994-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  1. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-09-07

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 figures.

  2. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-01-05

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70 C and 500 C and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  3. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.

    1989-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  4. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  5. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70.degree. C. and 500.degree. C. and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  6. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1994-06-14

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  7. Hydrocarbon adsorption in an aqueous environment: A computational study of alkyls on Cu(111)

    NASA Astrophysics Data System (ADS)

    Montemore, Matthew M.; Andreussi, Oliviero; Medlin, J. Will

    2016-08-01

    Hydrocarbon chains are important intermediates in various aqueous-phase surface processes, such as CO2 electroreduction, aqueous Fischer-Tropsch synthesis, and aqueous phase reforming of biomass-derived molecules. Further, the interaction between water and adsorbed hydrocarbons represents a difficult case for modern computational methods. Here, we explore various methods for calculating the energetics of this interaction within the framework of density functional theory and explore trade-offs between the use of low water coverages, molecular dynamics approaches, and minima hopping for identification of low energy structures. An effective methodology for simulating low temperature processes is provided by using a unit cell in which the vacuum space is filled with water, employing the minima hopping algorithm to search for low-lying minima, and including dispersion (van der Waals) interactions. Using this methodology, we show that a high coverage of adsorbed alkyls is destabilized by the presence of water, while a low coverage of alkyls is stabilized. Solvation has a small effect on the energetics of hydrocarbon chain growth, generally decreasing its favorability at low temperatures. We studied higher temperatures by running molecular dynamics simulations starting at the minima found by the minima hopping algorithm and found that increased temperatures facilitate chain growth. The self-consistent continuum solvation method effectively describes the alkyl-water interaction and is in general agreement with the explicit solvation results in most cases, but care should be taken at high alkyl coverage.

  8. Bioaccumulation of perfluorinated alkyl acids: observations and models.

    PubMed

    Ng, Carla A; Hungerbühler, Konrad

    2014-05-06

    In this review, we consider the two prevailing hypotheses for the mechanisms that control the bioaccumulation of perfluorinated alkyl acids (PFAAs). The first assumes that partitioning to membrane phospholipids, which have a higher affinity for charged species than neutral storage lipids, can explain the high bioaccumulation potential of these compounds. The second assumes that interactions with proteins--including serum albumin, liver fatty acid binding proteins (L-FABP), and organic anion transporters--determine the distribution, accumulation and half-lives of PFAAs. We consider three unique phenomena to evaluate the two models: (1) observed patterns of tissue distribution in the laboratory and field, (2) the relationship between perfluorinated chain length and bioaccumulation, and (3) species- and gender-specific variation in elimination half-lives. Through investigation of these three characteristics of PFAA bioaccumulation, we show the strengths and weaknesses of the two modeling approaches. We conclude that the models need not be mutually exclusive, but that protein interactions are needed to explain some important features of PFAA bioaccumulation. Although open questions remain, further research should include perfluorinated alkyl substances (PFASs) beyond the long-chain PFAAs, as these substances are being phased out and replaced by a wide variety of PFASs with largely unknown properties and bioaccumulation behavior.

  9. Characterization of Functionalized Self-Assembled Monolayers and Surface-Attached Interlocking Molecules Using Near-Edge X-ray Absorption Fine Structure Spectroscopy

    SciTech Connect

    Willey, Trevor M.

    2004-04-01

    Quantitative knowledge of the fundamental structure and substrate binding, as well as the direct measurement of conformational changes, are essential to the development of self-assembled monolayers (SAMs) and surface-attached interlocking molecules, catenanes and rotaxanes. These monolayers are vital to development of nano-mechanical, molecular electronic, and biological/chemical sensor applications. This dissertation investigates properties of functionalized SAMs in sulfur-gold based adsorbed molecular monolayers using quantitative spectroscopic techniques including near-edge x-ray absorption fine structure spectroscopy (NEXAFS) and x-ray photoelectron spectroscopy (XPS). The stability of the gold-thiolate interface is addressed. A simple model SAM consisting of dodecanethiol adsorbed on Au(111) degrades significantly in less than 24 hours under ambient laboratory air. S 2p and O 1s XPS show the gold-bound thiolates oxidize to sulfinates and sulfonates. A reduction of organic material on the surface and a decrease in order are observed as the layer degrades. The effect of the carboxyl vs. carboxylate functionalization on SAM structure is investigated. Carboxyl-terminated layers consisting of long alkyl-chain thiols vs. thioctic acid with short, sterically separated, alkyl groups are compared and contrasted. NEXAFS shows a conformational change, or chemical switchability, with carboxyl groups tilted over and carboxylate endgroups more upright. Surface-attached loops and simple surface-attached rotaxanes are quantitatively characterized, and preparation conditions that lead to desired films are outlined. A dithiol is often insufficient to form a molecular species bound at each end to the substrate, while a structurally related disulfide-containing polymer yields surface-attached loops. Similarly, spectroscopic techniques show the successful production of a simple, surface-attached rotaxane that requires a ''molecular riveting'' step to hold the mechanically attached

  10. Regioselectivity of Birch reductive alkylation of biaryls.

    PubMed

    Lebeuf, Raphaël; Robert, Frédéric; Landais, Yannick

    2005-10-13

    [reaction: see text] The regioselectivity of the Birch reductive alkylation of polysubstituted biaryls has been investigated. Results indicate that regioselectivity is affected by the electronic nature of substituents on both aromatic rings. The electron-rich 3,5-dimethoxyphenyl moiety is selectively reduced and then alkylated, while phenols and aniline are not dearomatized under these conditions. Biaryls possessing a phenol moiety are alkylated on the second ring, providing that the acidic proton has been removed prior to the Li/NH3 reduction.

  11. Multidimensional Self-Assembled Structures of Alkylated Cellulose Oligomers Synthesized via in Vitro Enzymatic Reactions.

    PubMed

    Yataka, Yusuke; Sawada, Toshiki; Serizawa, Takeshi

    2016-10-04

    The self-assembly of biomolecules into highly ordered nano-to-macroscale structures is essential in the construction of biological tissues and organs. A variety of biomolecular assemblies composed of nucleic acids, peptides, and lipids have been used as molecular building units for self-assembled materials. However, crystalline polysaccharides have rarely been utilized in self-assembled materials. In this study, we describe multidimensional self-assembled structures of alkylated cellulose oligomers synthesized via in vitro enzymatic reactions. We found that the alkyl chain length drastically affected the assembled morphologies and allomorphs of cellulose moieties. The modulation of the intermolecular interactions of cellulose oligomers by alkyl substituents was highly effective at controlling their assembly into multidimensional structures. This study proposes a new potential of crystalline oligosaccharides for structural components of molecular assemblies with controlled morphologies and crystal structures.

  12. The Scope of Direct Alkylation of Gold Surface with Solutions of C1–C4n-Alkylstannanes

    PubMed Central

    2015-01-01

    Treatment of cleaned gold surfaces with dilute tetrahydrofuran or chloroform solutions of tetraalkylstannanes (alkyl = methyl, ethyl, n-propyl, n-butyl) or di-n-butylmethylstannyl tosylate under ambient conditions causes a self-limited growth of disordered monolayers consisting of alkyls and tin oxide. Extensive use of deuterium labeling showed that the alkyls originate from the stannane and not from ambient impurities, and that trialkylstannyl groups are absent in the monolayers, contrary to previous proposals. Methyl groups attached to the Sn atom are not transferred to the surface. Ethyl groups are transferred slowly, and propyl and butyl rapidly. In all cases, tin oxide is codeposited in submonolayer amounts. The monolayers were characterized by ellipsometry, contact angle goniometry, polarization modulated IR reflection absorption spectroscopy, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy with ferrocyanide/ferricyanide, which revealed a very low charge-transfer resistance. The thermal stability of the monolayers and their resistance to solvents are comparable with those of an n-octadecanethiol monolayer. A preliminary examination of the kinetics of monolayer deposition from a THF solution of tetra-n-butylstannane revealed an approximately half-order dependence on the bulk solution concentration of the stannane, hinting that more than one alkyl can be transferred from a single stannane molecule. A detailed structure of the attachment of the alkyl groups is not known, and it is proposed that it involves direct single or multiple bonding of one or more C atoms to one or more Au atoms. PMID:26327466

  13. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Alkyl ketene dimers. 176.120 Section 176.120 Food... Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may... section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl...

  14. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Alkyl ketene dimers. 176.120 Section 176.120 Food... Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may... section. (a) The alkyl ketene dimers are manufactured by the dehydrohalogenation of the acyl...

  15. Alkylating agents and immunotoxins exert synergistic cytotoxic activity against ovarian cancer cells. Mechanism of action.

    PubMed Central

    Lidor, Y J; O'Briant, K C; Xu, F J; Hamilton, T C; Ozols, R F; Bast, R C

    1993-01-01

    Alkylating agents can be administered in high dosage to patients with ovarian cancer using autologous bone marrow support, but drug-resistant tumor cells can still persist. Immunotoxins provide reagents that might eliminate drug resistant cells. In the present study, concurrent treatment with alkylators and immunotoxins proved superior to treatment with each agent alone. Toxin immunoconjugates prepared from different monoclonal antibodies and recombinant ricin A chain (rRTA) inhibited clonogenic growth of ovarian cancer cell lines in limiting dilution assays. When alkylating agents and toxin conjugates were used in combination, the addition of the immunotoxins to cisplatin, or to cisplatin and thiotepa, produced synergistic cytotoxic activity against the OVCA 432 and OVCAR III cell lines. Studies performed to clarify the mechanism of action showed that cisplatin and thiotepa had no influence on internalization and binding of the 317G5-rRTA immunotoxin. Intracellular uptake of [195m]Pt-cisplatin was not affected by the immunoconjugate and thiotepa. The combination of the 317G5-rRTA and thiotepa, as well as 317G5-rRTA alone, increased [195m]Pt cisplatin-DNA adduct levels. The immunotoxin alone and in combination with the alkylators decreased intracellular glutathione levels and reduced glutathione-S-transferase activity. Repair of DNA damage induced by the combination of alkylators and 317G5-rRTA was significantly reduced when compared to repair after damage with alkylators alone. These findings suggest that immunotoxins affect levels and activity of enzymes required for the prevention and repair of alkylator damage. Images PMID:8227359

  16. Ruthenium-catalyzed meta/ortho-selective C-H alkylation of azoarenes using alkyl bromides.

    PubMed

    Li, Gang; Ma, Xingxing; Jia, Chunqi; Han, Qingqing; Wang, Ya; Wang, Junjie; Yu, Liuyang; Yang, Suling

    2017-01-19

    meta/ortho-Selective CAr-H (di)alkylation reactions of azoarenes have been achieved via [Ru(p-cymene)Cl2]2 catalyzed ortho-metalation using various types of alkyl bromides. Particularly, dual meta-alkylation of azoarene and reduction offer an attractive strategy for the synthesis of meta-alkylanilines, which are difficult to access via traditional aniline functionalization methods.

  17. Temperament and attachment disorders.

    PubMed

    Zeanah, Charles H; Fox, Nathan A

    2004-03-01

    Reviewed in this article is research on children with reactive attachment disorder (RAD) who exhibit specific patterns of socially aberrant behavior resulting from being maltreated or having limited opportunities to form selective attachments. There are no data explaining why 2 different patterns of the disorder, an emotionally withdrawn-inhibited pattern and an indiscriminate-disinhibited pattern, arise from similarly aberrant environments. In this article, we consider whether temperamental differences might contribute to the different manifestations of reactive attachment disorder (RAD) in the context of adverse environments. Although the association between attachment and temperament has been studied extensively and has been the subject of spirited debate within the field of child development, there are no extant data on the influence of temperament on the development of attachment disorders. We consider possible directions for research efforts designed to explore the biological underpinnings of the complex phenomenon of attachment disorders.

  18. Blade attachment assembly

    DOEpatents

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  19. Synthesis of Side Chain Liquid Crystal Polymers by Living Ring Opening Metathesis Polymerization. 3. Influence of Molecular Weight, Interconnecting Unit and Substituent on the Mesomorphic behavior of Polymers with Laterally Attached Mesogens

    DTIC Science & Technology

    1992-04-08

    Metathesis Polymerization. 3. In- fluence of Molecular Weight, Interconnecting Unit ... 6. AUTHOR(S) Coleen Pugh and Richard R. Schrock 7. PERFORMING...Unit and Substituent on the Mesomorphic Behavior of Polymers with Laterally Attached Mesogens. by Coleen Pugh t and Richard R. Schrock Submitted to...Mesogens. by Coleen Pugh+ and Richard R. Schrock* Contribution from Department of Chemistry 6-331 Massachusetts Institute of Technology Cambridge

  20. N-Alkylation by Hydrogen Autotransfer Reactions.

    PubMed

    Ma, Xiantao; Su, Chenliang; Xu, Qing

    2016-06-01

    Owing to the importance of amine/amide derivatives in all fields of chemistry, and also the green and environmentally benign features of using alcohols as alkylating reagents, the relatively high atom economic dehydrative N-alkylation reactions of amines/amides with alcohols through hydrogen autotransfer processes have received much attention and have developed rapidly in recent decades. Various efficient homogeneous and heterogeneous transition metal catalysts, nano materials, electrochemical methods, biomimetic methods, asymmetric N-alkylation reactions, aerobic oxidative methods, and even certain transition metal-free, catalyst-free, or autocatalyzed methods, have also been developed in recent years. With a brief introduction to the background and developments in this area of research, this chapter focuses mainly on recent progress and technical and conceptual advances contributing to the development of this research in the last decade. In addition to mainstream research on homogeneous and heterogeneous transition metal-catalyzed reactions, possible mechanistic routes for hydrogen transfer and alcohol activation, which are key processes in N-alkylation reactions but seldom discussed in the past, the recent reports on computational mechanistic studies of the N-alkylation reactions, and the newly emerged N-alkylation methods based on novel alcohol activation protocols such as air-promoted reactions and transition metal-free methods, are also reviewed in this chapter. Problems and bottlenecks that remained to be solved in the field, and promising new research that deserves greater future attention and effort, are also reviewed and discussed.

  1. Attachment Theory and Mindfulness

    ERIC Educational Resources Information Center

    Snyder, Rose; Shapiro, Shauna; Treleaven, David

    2012-01-01

    We initiate a dialog between two central areas in the field of psychology today: attachment theory/research and mindfulness studies. The impact of the early mother-infant relationship on child development has been well established in the literature, with attachment theorists having focused on the correlation between a mother's capacity for…

  2. Attachment Line Blockage Models

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Photographs shows the attachment-line experiment model with fairing and fence for supersonic attachment-line experiments. The fairing is intended to eliminate the wing/fuselage juncture shock and align the flow for the streamlined fence. The streamlined fence traps the turbulent fuselage boundary layer to prevent turbulent contamination of the leading edge flow.

  3. Infant Feeding and Attachment.

    ERIC Educational Resources Information Center

    Ainsworth, Mary D. Salter; Tracy, Russel L.

    This paper has two major purposes: first, to consider how infant feeding behavior may fit into attachment theory; and second, to cite some evidence to show how an infant's early interaction with his mother in the feeding situation is related to subsequent development. It was found that sucking and rooting are precursor attachment behaviors that…

  4. Separation and Attachment

    ERIC Educational Resources Information Center

    Honig, Alice Sterling

    2005-01-01

    Developing secure attachments with babies gives them a very special gift--the foundation for good infant mental health! In this article, the author discusses how to develop secure attachments with babies. Babies who are in the care of others during the day often suffer from separations from their special adults. Thirteen "tips" to ensure that…

  5. Reactive Attachment Disorder.

    ERIC Educational Resources Information Center

    Chapman, Sue

    2002-01-01

    Written by a British parent, this case study tells the story of an adopted child who experienced many difficulties adjusting to life at home and school. It describes attachment disorder, possible causes of attachment difficulties, the bonding cycle, therapeutic parenting, and how schools can support the re-nurturing process. (Contains references.)…

  6. Temperament and Attachment Disorders

    ERIC Educational Resources Information Center

    Zeanah, Charles H.; Fox, Nathan A.

    2004-01-01

    Reviewed in this article is research on children with reactive attachment disorder (RAD) who exhibit specific patterns of socially aberrant behavior resulting from being maltreated or having limited opportunities to form selective attachments. There are no data explaining why 2 different patterns of the disorder, an emotionally withdrawn-inhibited…

  7. Late-life attachment.

    PubMed

    Freitas, Mélanie; Rahioui, Hassan

    2017-03-01

    Old age is likely to cause a crisis in one's life because of the vulnerabilities it brings up, acting as stressful elements disrupting the elder's feeling of security. It leads to the activation of what is called his attachment system, consisting in attachment styles and interpersonal emotional regulation strategies. To recover a higher sense of safety, the elder would refer to his attachment figures, that is to say closed people paying attention to him, showing towards him availability and consideration. However older adults particularly see their tolerance threshold lowered, regarding an accumulation of losses (true or symbolic) and stressful events within their lifetime. In a psychological and organic exhaustion phenomenon, the risk is to wear out the interpersonal emotional regulation strategies. These are as much vulnerabilities that may increase psychiatric decompensation, including depression. To resolve the tension of this period and to found a necessary secure feeling, the elder will have to redesign the attachment links previously settled and proceed to adjustments to this new context. The need of relational closeness comes back in the elders' attachment behaviour, counting on attachment figures not only to help their loneliness or dependency, but essentially to support them in a narcissist and affective way. That is why attachment theory enlightens the late life period, such as the new challenges older adults have to face. Many studies recognize its value in understanding the transition to old age, but without proposing conceptualization. We aim first to focus on attachment conception to say how much it is relevant with elderly, and then to describe specific terms of attachment within this population in order to better understand those patients. To finish, we must think about new therapeutic proposals taking into consideration the attachment perspective for a better understanding of old age transition.

  8. [Mentalization and attachment transmission].

    PubMed

    Böhmann, Johann; Fritsch, Sophia; Lück, Monika; Stumpe, Anna; Taubner, Svenja; Vesterling, Christina

    2014-01-01

    The present study was investigating the predictive role of maternal mentalizing and general as well as depressive symptom burden for attachment security at the end of the first year on a sample of 44 mother-child-dyads from a low-risk community study. Maternal mentalizing was assessed in a multidimensional way as Reflective Functioning (off-line) and Mind-Mindedness (on-line). The design was longitudinal measuring maternal Mind-Mindedness from a videotaped mother-child-play-interaction at the age of three months. General and depressive symptom burden was assessed using the SCL-90-R when the children were nine months old. Maternal attachment and Reflective-Functioning, using the Adult-Attachment-Interview, as well as children's attachment behavior, using the Strange-Situation-Test, were investigated at the age of twelve months. Secure maternal attachment was associated with higher Reflective Functioning, higher frequency of Mind-Mindedness and lower general and depressive symptom burden. A moderation-analysis showed a statistical trend (p = .08) that the interaction of the frequency of mind-related comments, general symptom severity and maternal attachment has a predictive value for infantile attachment security. Results can be tentatively interpreted that mothers with insecure attachment who had a lower general symptom burden and who related to their three-months old babies with a high frequency of mind-related-comments were more likely to have securely attached children. Thus, results may serve as a groundwork for projects aiming to prevent the transmission of insecure attachment by strengthening maternal Mind-Mindedness and working on the reduction of maternal general symptom burden.

  9. Ligand-Accelerated ortho-C–H Alkylation of Arylcarboxylic Acids Using Alkyl Boron Reagents

    PubMed Central

    Thuy-Boun, Peter S.; Villa, Giorgio; Dang, Devin; Richardson, Paul; Su, Shun; Yu, Jin-Quan

    2013-01-01

    A protocol for the Pd(II)-catalyzed ortho-C–H alkylation of phenylacetic and benzoic acids using alkylboron reagents is disclosed. Mono-protected amino acid ligands (MPAA) were found to significantly promote reactivity. Both potassium alkyltrifluoroborates and alkylboronic acids were compatible coupling partners. The possibility of a radical alkyl transfer to Pd(II) was also investigated. PMID:24124892

  10. The isobutylene-isobutane alkylation process in liquid HF revisited.

    PubMed

    Esteves, P M; Araújo, C L; Horta, B A C; Alvarez, L J; Zicovich-Wilson, C M; Ramírez-Solís, A

    2005-07-07

    Details on the mechanism of HF catalyzed isobutylene-isobutane alkylation were investigated. On the basis of available experimental data and high-level quantum chemical calculations, a detailed reaction mechanism is proposed taking into account solvation effects of the medium. On the basis of our computational results, we explain why the density of the liquid media and stirring rates are the most important parameters to achieve maximum yield of alkylate, in agreement with experimental findings. The ab initio Car-Parrinello molecular dynamics calculations show that isobutylene is irreversibly protonated in the liquid HF medium at higher densities, leading to the ion pair formation, which is shown to be a minimum on the potential energy surface after optimization using periodic boundary conditions. The HF medium solvates preferentially the fluoride anion, which is found as solvated [FHF](-) or solvated F(-.)(HF)(3). On the other hand, the tert-butyl cation is weakly solvated, where the closest HF molecules appear at a distance of about 2.9 Angstrom with the fluorine termination of an HF chain.

  11. Differential alkylation-based redox proteomics--Lessons learnt.

    PubMed

    Wojdyla, Katarzyna; Rogowska-Wrzesinska, Adelina

    2015-12-01

    Cysteine is one of the most reactive amino acids. This is due to the electronegativity of sulphur atom in the side chain of thiolate group. It results in cysteine being present in several distinct redox forms inside the cell. Amongst these, reversible oxidations, S-nitrosylation and S-sulfenylation are crucial mediators of intracellular redox signalling, with known associations to health and disease. Study of their functionalities has intensified thanks to the development of various analytical strategies, with particular contribution from differential alkylation-based proteomics methods. Presented here is a critical evaluation of differential alkylation-based strategies for the analysis of S-nitrosylation and S-sulfenylation. The aim is to assess the current status and to provide insights for future directions in the dynamically evolving field of redox proteomics. To achieve that we collected 35 original research articles published since 2010 and analysed them considering the following parameters, (i) resolution of modification site, (ii) quantitative information, including correction of modification levels by protein abundance changes and determination of modification site occupancy, (iii) throughput, including the amount of starting material required for analysis. The results of this meta-analysis are the core of this review, complemented by issues related to biological models and sample preparation in redox proteomics, including conditions for free thiol blocking and labelling of target cysteine oxoforms.

  12. Alkylation of isobutane with light olefins: Yields of alkylates for different olefins

    SciTech Connect

    Albright, L.F.; Kranz, K.E.; Masters, K.R.

    1993-12-01

    For alkylation of isobutane with C{sub 3}-C{sub 5} olefins using sulfuric acid as the catalyst, the yields of alkylates with different olefins are compared as the operating conditions are changed. The results of recent pilot plant experiments with propylene, C{sub 4} olefins, and C{sub 5} olefins permit such comparisons. The yields expressed as weight of alkylate produced per 100 wt of olefin consumed varied from about 201:100 to 220:100. Weight ratios of the isobutane consumed per olefin consumed vary from about 101:100 to 120:100. differences of yield values are explained by the changes in the overall chemistry. The procedure employed to calculate yields with good accuracy is based on the analysis of the alkylate and the amount of conjunct polymers produced. Based on literature data, yields are also reported for alkylations using HF as the catalyst.

  13. Palladium-Catalyzed Arylation of Alkyl Sulfenate Anions.

    PubMed

    Jia, Tiezheng; Zhang, Mengnan; Jiang, Hui; Wang, Carol Y; Walsh, Patrick J

    2015-11-04

    A unique palladium-catalyzed arylation of alkyl sulfenate anions is introduced that affords aryl alkyl sulfoxides in high yields. Due to the base sensitivity of the starting sulfoxides, sulfenate anion intermediates, and alkyl aryl sulfoxide products, the use of a mild method to generate alkyl sulfenate anions was crucial to the success of this process. Thus, a fluoride triggered elimination strategy was employed with alkyl 2-(trimethylsilyl)ethyl sulfoxides to liberate the requisite alkyl sulfenate anion intermediates. In the presence of palladium catalysts with bulky monodentate phosphines (SPhos and Cy-CarPhos) and aryl bromides or chlorides, alkyl sulfenate anions were readily arylated. Moreover, the thermal fragmentation and the base promoted elimination of alkyl sulfoxides was overridden. The alkyl sulfenate anion arylation exhibited excellent chemoselectivity in the presence of functional groups, such as anilines and phenols, which are also known to undergo palladium catalyzed arylation reactions.

  14. Photon Induced Electron Attachment.

    DTIC Science & Technology

    1984-12-01

    initial measure- ments was that high switch currents and long pulse durations appear to lead to substantially enhanced attachment rates in C3F8 ...similar conditions, but with 1.9 x 1015 C3F8 molecules/cm 3 added to the switch gas mixture. The initial current rise is comparable in both plots, but the...enhanced attachment during the switch opening time period. B. C0O Laser Excitation The photon enhanced attachment of the three gases NF3, C3F8 I and

  15. The neurobiology of attachment.

    PubMed

    Insel, T R; Young, L J

    2001-02-01

    It is difficult to think of any behavioural process that is more intrinsically important to us than attachment. Feeding, sleeping and locomotion are all necessary for survival, but humans are, as Baruch Spinoza famously noted, "a social animal" and it is our social attachments that we live for. Over the past decade, studies in a range of vertebrates, including humans, have begun to address the neural basis of attachment at a molecular, cellular and systems level. This review describes some of the important insights from this work.

  16. Observation of surface structure of 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide using high-resolution Rutherford backscattering spectroscopy

    NASA Astrophysics Data System (ADS)

    Nakajima, Kaoru; Ohno, Atsushi; Hashimoto, Hiroki; Suzuki, Motofumi; Kimura, Kenji

    2010-07-01

    The surface structures of 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([CnMIM][TFSI], n=2,4,6) are studied by high-resolution Rutherford backscattering spectroscopy. The average composition of the surface molecular layer is very close to the stoichiometric composition, showing that neither ion is enriched in the surface layer. A detailed analysis indicates that both cations and anions have preferential molecular orientations at the surface. The alkyl chains of the [CnMIM] cations protrude to the vacuum and the CF3 groups of the [TFSI] anions are also pointing toward the vacuum. While the orientation of the [TFSI] anion becomes weaker with increasing alkyl-chain length, the protrusion of the alkyl chain occurs irrespective of the chain length. It was also found that the N(SO2)2 moiety is located nearly at the same depth as the imidazolium ring, suggesting that one of oxygen atoms in [TFSI] is bonded to the hydrogen of the C2 carbon atom of the imidazolium ring.

  17. Observation of surface structure of 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide using high-resolution Rutherford backscattering spectroscopy.

    PubMed

    Nakajima, Kaoru; Ohno, Atsushi; Hashimoto, Hiroki; Suzuki, Motofumi; Kimura, Kenji

    2010-07-28

    The surface structures of 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C(n)MIM][TFSI], n=2,4,6) are studied by high-resolution Rutherford backscattering spectroscopy. The average composition of the surface molecular layer is very close to the stoichiometric composition, showing that neither ion is enriched in the surface layer. A detailed analysis indicates that both cations and anions have preferential molecular orientations at the surface. The alkyl chains of the [C(n)MIM] cations protrude to the vacuum and the CF(3) groups of the [TFSI] anions are also pointing toward the vacuum. While the orientation of the [TFSI] anion becomes weaker with increasing alkyl-chain length, the protrusion of the alkyl chain occurs irrespective of the chain length. It was also found that the N(SO(2))(2) moiety is located nearly at the same depth as the imidazolium ring, suggesting that one of oxygen atoms in [TFSI] is bonded to the hydrogen of the C(2) carbon atom of the imidazolium ring.

  18. Minimal structural requirements of alkyl γ-lactones capable of antagonizing the cocaine-induced motility decrease in planarians.

    PubMed

    Baker, Debra; Deats, Sean; Boor, Peter; Pruitt, James; Pagán, Oné R

    2011-11-01

    We recently reported that the natural cyclic lactone, parthenolide, and related analogs prevent the expression of behavioral effects induced by cocaine in planarians and that parthenolide's γ-lactone ring is required for this effect. In the present work, we tested a series of alkyl γ-lactones with varying chain length (1-8 carbons) to determine their ability to antagonize the planarian motility decrease induced by 200 μM cocaine. Alkyl lactones with up to a 4-carbon alkyl chain did not affect planarian motility or antagonized the cocaine-induced motility decrease; only the compound γ-nonalactone (a γ-lactone with a 5-carbon chain) was able to prevent the cocaine-induced behavioral patterns, while alkyl lactones with longer carbon chains failed to prevent the cocaine-induced effects. Thus, we conclude that the optimal structural features of this family of compounds to antagonize cocaine's effect in this experimental system is a γ-lactone ring with at a 5-carbon long functional group.

  19. Alkyl phosphonic acids and sulfonic acids in the Murchison meteorite

    NASA Technical Reports Server (NTRS)

    Cooper, George W.; Onwo, Wilfred M.; Cronin, John R.

    1992-01-01

    Homologous series of alkyl phosphonic acids and alkyl sulfonic acids, along with inorganic orthophosphate and sulfate, are identified in water extracts of the Murchison meteorite after conversion to their t-butyl dimethylsilyl derivatives. The methyl, ethyl, propyl, and butyl compounds are observed in both series. Five of the eight possible alkyl phosphonic acids and seven of the eight possible alkyl sulfonic acids through C4 are identified. Abundances decrease with increasing carbon number as observed of other homologous series indigenous to Murchison. Concentrations range downward from approximately 380 nmol/gram in the alkyl sulfonic acid series, and from 9 nmol/gram in the alkyl phosphonic acid series.

  20. Degradation of Alkyl Benzene Sulfonate by Pseudomonas Species1

    PubMed Central

    Horvath, R. S.; Koft, B. W.

    1972-01-01

    Pseudomonas sp. HK-1 showed a direct relation between the concentration of alkyl benzene sulfonate (ABS) supplied and cell yields. Since growth on ABS alone did not occur, it was necessary to correlate the total energy obtained by the cells to the ABS concentration when glucose was supplied in a limiting concentration. Several types of metabolic attack in addition to the sulfonate removal were noted: (i) side-chain utilization as indicated by the production of tertiarybutyl alcohol and isopropanol and (ii) ring metabolism as indicated by the presence of phenol, catechol, mandelic acid, benzyl alcohol, and benzoic acid in spent growth media. Utilization of ABS was greatly enhanced by the presence of phenol. This enhancement suggests co-metabolism and that limited concentrations of phenolic products derived from ABS must be accumulated to get active metabolism of the ABS molecule. PMID:5017680

  1. Detection of a branched alkyl molecule in the interstellar medium: iso-propyl cyanide

    NASA Astrophysics Data System (ADS)

    Belloche, Arnaud; Garrod, Robin T.; Müller, Holger S. P.; Menten, Karl M.

    2014-09-01

    The largest noncyclic molecules detected in the interstellar medium (ISM) are organic with a straight-chain carbon backbone. We report an interstellar detection of a branched alkyl molecule, iso-propyl cyanide (i-C3H7CN), with an abundance 0.4 times that of its straight-chain structural isomer. This detection suggests that branched carbon-chain molecules may be generally abundant in the ISM. Our astrochemical model indicates that both isomers are produced within or upon dust grain ice mantles through the addition of molecular radicals, albeit via differing reaction pathways. The production of iso-propyl cyanide appears to require the addition of a functional group to a nonterminal carbon in the chain. Its detection therefore bodes well for the presence in the ISM of amino acids, for which such side-chain structure is a key characteristic.

  2. Alkylation of Staurosporine to Derive a Kinase Probe for Fluorescence Applications

    PubMed Central

    Disney, Alexander J. M.; Kellam, Barrie

    2016-01-01

    Abstract The natural product staurosporine is a high‐affinity inhibitor of nearly all mammalian protein kinases. The labelling of staurosporine has proven effective as a means of generating protein kinase research tools. Most tools have been generated by acylation of the 4′‐methylamine of the sugar moiety of staurosporine. Herein we describe the alkylation of this group as a first step to generate a fluorescently labelled staurosporine. Following alkylation, a polyethylene glycol linker was installed, allowing subsequent attachment of fluorescein. We report that this fluorescein–staurosporine conjugate binds to cAMP‐dependent protein kinase in the nanomolar range. Furthermore, its binding can be antagonised with unmodified staurosporine as well as ATP, indicating it targets the ATP binding site in a similar fashion to native staurosporine. This reagent has potential application as a screening tool for protein kinases of interest. PMID:27008372

  3. Alkylation of Staurosporine to Derive a Kinase Probe for Fluorescence Applications.

    PubMed

    Disney, Alexander J M; Kellam, Barrie; Dekker, Lodewijk V

    2016-05-06

    The natural product staurosporine is a high-affinity inhibitor of nearly all mammalian protein kinases. The labelling of staurosporine has proven effective as a means of generating protein kinase research tools. Most tools have been generated by acylation of the 4'-methylamine of the sugar moiety of staurosporine. Herein we describe the alkylation of this group as a first step to generate a fluorescently labelled staurosporine. Following alkylation, a polyethylene glycol linker was installed, allowing subsequent attachment of fluorescein. We report that this fluorescein-staurosporine conjugate binds to cAMP-dependent protein kinase in the nanomolar range. Furthermore, its binding can be antagonised with unmodified staurosporine as well as ATP, indicating it targets the ATP binding site in a similar fashion to native staurosporine. This reagent has potential application as a screening tool for protein kinases of interest.

  4. Chiral Alkyl Halides: Underexplored Motifs in Medicine

    PubMed Central

    Gál, Bálint; Bucher, Cyril; Burns, Noah Z.

    2016-01-01

    While alkyl halides are valuable intermediates in synthetic organic chemistry, their use as bioactive motifs in drug discovery and medicinal chemistry is rare in comparison. This is likely attributable to the common misconception that these compounds are merely non-specific alkylators in biological systems. A number of chlorinated compounds in the pharmaceutical and food industries, as well as a growing number of halogenated marine natural products showing unique bioactivity, illustrate the role that chiral alkyl halides can play in drug discovery. Through a series of case studies, we demonstrate in this review that these motifs can indeed be stable under physiological conditions, and that halogenation can enhance bioactivity through both steric and electronic effects. Our hope is that, by placing such compounds in the minds of the chemical community, they may gain more traction in drug discovery and inspire more synthetic chemists to develop methods for selective halogenation. PMID:27827902

  5. Effects of the addition of dimer acid alkyl esters on the properties of ethyl cellulose.

    PubMed

    Lee, Sangjun; Ko, Kwang-Hwan; Shin, Jihoon; Kim, Nam-Kyun; Kim, Young-Wun; Kim, Joon-Seop

    2015-05-05

    In this study, we synthesized dimer acid (DA) esters, having short to long alkyl chains, (DA-Cn) by the Diels-Alder reaction and subsequent esterification reaction of fatty acids that were prepared by the hydrolysis of waste vegetable oil. It was found that the DA-Cn were thermally more stable than common petroleum-based plasticizer DOP. When the DOP, DA, or DA-Cn with short alkyl chains were added to ethyl cellulose (EC), the optical clarity and SEM images of the samples showed their good miscibility with those additives in a micro-scale. It was also found that the rubbery modulus of the EC decreased with increasing amount of additives; the type of the additives did not affect the rates of the decrease in the rubbery modulus. The main transition temperatures of the EC containing either DA or DA-C1 or DA-C4 decreased with increasing amounts of those additives and were comparable to that of the DOP-containing EC. The above findings suggested that the DA and its esters with short alkyl chains could act as effective plasticizer and, thus, could be used instead of the DOP. In addition, the results obtained from tensile testing and leaching experiments implied that the DA might be better plasticizer than the DA-C1 and DA-C4, at least in some cases, because of hydrogen-bonding with the EC.

  6. Mirror Attachment For Borescope

    NASA Technical Reports Server (NTRS)

    Gearhart, John F.; Peloquin, James E.

    1994-01-01

    Attachment for articulated borescope provides views into small, normally inaccessible spaces. Simple small round mirror on extension arm welded to borescope head. Tilted at angle to axis of borescope head, mirror provides views sideways to borescope head. Disassembly of turbopump blades not necessary to enable fluorescent-penetrant-dye inspection. Attachment used to inspect difficult-to-reach internal parts of other assemblies. Also used for inspection with ordinary white light.

  7. Solid-state 13C NMR study of banana liquid crystals - 3: Alkyl-tail-group packing environments of an acute-angle bent-core molecule in the hexagonal columnar and cubic phases

    NASA Astrophysics Data System (ADS)

    Kurosu, Hiromichi; Endo, Yumi; Kimura, Saori; Hashimoto, Tomoko; Harada, Motoi; Lee, Eun-Woo; Sone, Masato; Watanabe, Junji; Kang, Sungmin

    2016-02-01

    Solid-state 13C nuclear magnetic resonance (NMR) measurements were performed on the hexagonal columnar and cubic phases of an acute-angle banana-shaped molecule, N(1,7)-S30. In the hexagonal columnar phase, three peaks appear at the NMR chemical shifts assigned to the internal methylene carbons of alkyl tails, indicating that the two alkyl tails have different packing structures, and one of the tails has two different conformations within a single molecule. Combined cross-polarization/magic-angle spinning and pulse saturation transfer/magic-angle spinning measurements show that one of the alkyl chains is located inside and the other is located outside the columnar structure. In the cubic phase, pulse saturation transfer/magic-angle spinning measurement shows that only one peak appears at the NMR chemical shifts assigned to the internal methylene carbons of alkyl tails, indicating that both of the alkyl chains are located outside the cubic structure.

  8. Micromechanical die attachment surcharge

    DOEpatents

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  9. N-alkylated and O-alkylated regioisomers of 5-(hydroxyalkyl)pyrimidines: Synthesis and structural study

    NASA Astrophysics Data System (ADS)

    Meščić, Andrijana; Glavač, Danijel; Osmanović, Amar; Završnik, Davorka; Cetina, Mario; Makuc, Damjan; Plavec, Janez; Ametamey, Simon M.; Raić-Malić, Silvana

    2013-05-01

    Synthesis of novel 5-(2-hydroxyethyl) and 5-(3-hydroxypropyl) acyclic pyrimidine nucleosides is described. Introduction of penciclovir-like side chain in C-5 substituted pyrimidines occurred both at N-1 and O-2 position of pyrimidine moiety that was corroborated by correlation of signals in 2D HMBC spectra. Therefore, alkylation of 5-(acetoxyethyl)-4-methoxypyrimidin-2-one (2a) and 5-(acetoxypropyl)-4-methoxypyrimidin-2-one (2b) afforded mixture of N- and O-acyclic pyrimidine nucleosides in the ratio of 49: 45 (4a: 5a) and 41: 21 (4b: 5b). Structures of 5-(acetoxyalkyl)-4-methoxypyrimidin-2-ones, as the first examples of 4-methoxypyrimidin-2-ones, were unambiguously confirmed by single crystal X-ray diffraction analysis.

  10. Transition metal-free decarboxylative alkylation reactions.

    PubMed

    Liu, Ping; Zhang, Guanghui; Sun, Peipei

    2016-11-22

    This review summarizes advances in the decarboxylative alkylation of carboxylic acids and their derivatives under transition metal-free conditions in recent years. Unlike most transition metal-catalyzed decarboxylative coupling reactions which tend to undergo catalytic cycles, the mechanisms of reactions under metal-free conditions are usually diverse and even ambiguous in some cases. This article offers an overview of reaction types and their corresponding mechanisms, highlights some of the advantages and limitations, and focuses on introducing UV and visible light-induced, organocatalyst and peroxide promoted radical processes for decarboxylative alkylation and the formation of C-C bonds.

  11. Microbial Desulfurization of Alkylated Dibenzothiophenes from a Hydrodesulfurized Middle Distillate by Rhodococcus erythropolis I-19

    PubMed Central

    Folsom, B. R.; Schieche, D. R.; DiGrazia, P. M.; Werner, J.; Palmer, S.

    1999-01-01

    Rhodococcus erythropolis I-19, containing multiple copies of key dsz genes, was used to desulfurize alkylated dibenzothiophenes (Cx-DBTs) found in a hydrodesulfurized middle-distillate petroleum (MD 1850). Initial desulfurization rates of dibenzothiophene (DBT) and MD 1850 by I-19 were 5.0 and 2.5 μmol g dry cell weight−1 min−1, more than 25-fold higher than that for wild-type bacteria. According to sulfur K-edge X-ray absorption near-edge structure (XANES) analysis, thiophenic compounds accounted for >95% of the total sulfur found in MD 1850, predominantly Cx-DBTs and alkylated benzothiophenes. Extensive biodesulfurization resulted in a 67% reduction of total sulfur from 1,850 to 615 ppm S. XANES analysis of the 615-ppm material gave a sulfur distribution of 75% thiophenes, 11% sulfides, 2% sulfoxides, and 12% sulfones. I-19 preferentially desulfurized DBT and C1-DBTs, followed by the more highly alkylated Cx-DBTs. Shifting zero- to first-order (first-order) desulfurization rate kinetics were observed when MD 1850 was diluted with hexadecane. Apparent saturation rate constant (K0) and half-saturation rate constant (K1) values were calculated to be 2.8 μmol g dry cell weight−1 min−1 and 130 ppm, respectively. However, partial biocatalytic reduction of MD 1850 sulfur concentration followed by determination of initial rates with fresh biocatalyst led to a sigmoidal kinetic behavior. A competitive-substrate model suggested that the apparent K1 values for each group of Cx-DBTs increased with increasing alkylation. Overall desulfurization rate kinetics with I-19 were affected by the concentration and distribution of Cx-DBTs according to the number and/or lengths of alkyl groups attached to the basic ring structure. PMID:10543810

  12. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    DOEpatents

    Ginosar, Daniel M.; Petkovic, Lucia

    2009-09-22

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  13. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    DOEpatents

    Ginosar, Daniel M.; Petkovic, Lucia M.

    2010-12-28

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  14. Alkylation by propylene oxide of deoxyribonucleic acid, adenine, guanosine and deoxyguanylic acid

    PubMed Central

    Lawley, P. D.; Jarman, M.

    1972-01-01

    1. Propylene oxide reacts with DNA in aqueous buffer solution at about neutral pH to yield two principal products, identified as 7-(2-hydroxypropyl)guanine and 3-(2-hydroxypropyl)adenine, which hydrolyse out of the alkylated DNA at neutral pH values at 37°C. 2. These products were obtained in quantity by reactions between propylene oxide and guanosine or adenine respectively. 3. The reactions between propylene oxide and adenine in acetic acid were parallel to those between dimethyl sulphate and adenine in neutral aqueous solution; the alkylated positions in adenine in order of decreasing reactivity were N-3, N-1 and N-9. A method for separating these alkyladenines is described. 4. Deoxyguanylic acid sodium salt was alkylated at N-7 by propylene oxide in neutral aqueous solution. 5. The nature of the side chain in the principal alkylation products was established by mass spectrometry, and the nature of the products is consistent with their formation by the bimolecular reaction mechanism. PMID:5073240

  15. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  16. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  17. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  18. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  19. IONIC LIQUID-CATALYZED ALKYLATION OF ISOBUTANE WITH 2-BUTENE

    EPA Science Inventory

    A detailed study of the alkylation of isobutane with 2-butene in ionic liquid media has been conducted using 1-alkyl-3-methylimidazolium halides?aluminum chloride encompassing various alkyl groups (butyl-, hexyl-, and octyl-) and halides (Cl, Br, and I) on its cations and anions,...

  20. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  1. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  2. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  3. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  4. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  5. 40 CFR 721.10233 - Linear alkyl epoxide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Linear alkyl epoxide (generic). 721... Substances § 721.10233 Linear alkyl epoxide (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as linear alkyl epoxide (PMN...

  6. 40 CFR 721.10233 - Linear alkyl epoxide (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Linear alkyl epoxide (generic). 721... Substances § 721.10233 Linear alkyl epoxide (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as linear alkyl epoxide (PMN...

  7. 40 CFR 721.10233 - Linear alkyl epoxide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Linear alkyl epoxide (generic). 721... Substances § 721.10233 Linear alkyl epoxide (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as linear alkyl epoxide (PMN...

  8. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  9. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  10. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  11. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  12. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  13. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  14. 40 CFR 721.10699 - Polyfluorinated alkyl thio acrylamide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyfluorinated alkyl thio acrylamide... Specific Chemical Substances § 721.10699 Polyfluorinated alkyl thio acrylamide (generic). (a) Chemical... as polyfluorinated alkyl thio acrylamide (PMN P-11-529) is subject to reporting under this...

  15. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  16. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  17. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  18. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  19. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  20. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  1. Copper-catalyzed radical carbooxygenation: alkylation and alkoxylation of styrenes.

    PubMed

    Liao, Zhixiong; Yi, Hong; Li, Zheng; Fan, Chao; Zhang, Xu; Liu, Jie; Deng, Zixin; Lei, Aiwen

    2015-01-01

    A simple copper-catalyzed direct radical carbooxygenation of styrenes is developed utilizing alkyl bromides as radical resources. This catalytic radical difunctionalization accomplishes both alkylation and alkoxylation of styrenes in one pot. A broad range of styrenes and alcohols are well tolerated in this transformation. The EPR experiment shows that alkyl halides could oxidize Cu(I) to Cu(II) in this transformation.

  2. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  3. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  4. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  5. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  6. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  7. Autism and Attachment: The Attachment Q-Sort

    ERIC Educational Resources Information Center

    Rutgers, Anna H.; Van Ijzendoorn, Marinus H.; Bakermans-Kranenburg, Marian J.; Swinkels, Sophie H. N.

    2007-01-01

    Children with autism are able to show secure attachment behaviours to their parents/caregivers. Most studies on attachment in children with autism used a (modified) Strange Situation Procedure (SSP) to examine attachment security. An advantage of the Attachment Q-Sort (AQS) over the SSP is that it can be attuned to the secure-base behaviour of…

  8. Synthesis and characterization of chitosan alkyl urea.

    PubMed

    Wang, Jing; Jiang, Ji-Zhou; Chen, Wei; Bai, Zheng-Wu

    2016-07-10

    Chitosan is a versatile material employed for various purposes in many fields including the development of chiral stationary phases for enantioseparation. Chitosan alkyl urea is a kind of intermediate used to prepare enantioseparation materials. In order to synthesize the intermediates, in the present work, a new way to prepare chitosan alkyl urea has been established: chitosan was first reacted with methyl chloroformate yielding N-methoxyformylated chitosan, which was then converted to chitosan alkyl urea through amine-ester exchange reaction. With a large excess of methyl chloroformate and primary amine of low stereohindrance, the amino group in chitosan could be almost completely converted to ureido group. The as-prepared chitosan alkyl urea derivatives were characterized by IR, (1)H NMR, (13)C NMR,(1)H-(1)H COSY and (1)H-(13)C HSQC NMR spectra. The chemical shifts of hydrogen and carbon atoms of glucose unit were assigned. It was found that the degree of substitution was obviously lower if cyclopropyl amine, aniline, tert-butyl amine and diethyl amine were used as reactants for the amine-ester exchange reaction. The reason was explained with the aid of theoretical calculations.

  9. 77 FR 72747 - Alkyl(C8

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-06

    ... Classification System (NAICS) codes is not intended to be exhaustive, but rather provides a guide to help readers.../reproductive screening test (OECD 422) toxicity study on a representative N- alkyl(C 8 -C 18... in the reproductive or developmental parameters examined. No systemic toxicity was observed in...

  10. Identification of an Arabidopsis Fatty Alcohol:Caffeoyl-Coenzyme A Acyltransferase Required for the Synthesis of Alkyl Hydroxycinnamates in Root Waxes1[W][OA

    PubMed Central

    Kosma, Dylan K.; Molina, Isabel; Ohlrogge, John B.; Pollard, Mike

    2012-01-01

    While suberin is an insoluble heteropolymer, a number of soluble lipids can be extracted by rapid chloroform dipping of roots. These extracts include esters of saturated long-chain primary alcohols and hydroxycinnamic acids. Such fatty alcohols and hydroxycinnamic acids are also present in suberin. We demonstrate that alkyl coumarates and caffeates, which are the major components of Arabidopsis (Arabidopsis thaliana) root waxes, are present primarily in taproots. Previously we identified ALIPHATIC SUBERIN FERULOYL TRANSFERASE (At5g41040), a HXXXD-type acyltransferase (BAHD family), responsible for incorporation of ferulate into aliphatic suberin of Arabidopsis. However, aliphatic suberin feruloyl transferase mutants were unaffected in alkyl hydroxycinnamate ester root wax composition. Here we identify a closely related gene, At5g63560, responsible for the synthesis of a subset of alkyl hydroxycinnamate esters, the alkyl caffeates. Transgenic plants harboring PAt5g63560::YFP fusions showed transcriptional activity in suberized tissues. Knockout mutants of At5g63560 were severely reduced in their alkyl caffeate but not alkyl coumarate content. Recombinant At5g63560p had greater acyltransferase activity when presented with caffeoyl-Coenzyme A (CoA) substrate, thus we have named this acyltransferase FATTY ALCOHOL:CAFFEOYL-CoA CAFFEOYL TRANSFERASE. Stress experiments revealed elevated alkyl coumarate content in root waxes of NaCl-treated wild-type and fatty alcohol:caffeoyl-CoA caffeoyl transferase plants. We further demonstrate that FATTY ACYL-CoA REDUCTASEs (FARs) FAR5 (At3g44550), FAR4 (At3g44540), and FAR1 (At5g22500) are required for the synthesis of C18, C20, and C22 alkyl hydroxycinnamates, respectively. Collectively, these results suggest that multiple acyltransferases are utilized for the synthesis of alkyl hydroxycinnamate esters of Arabidopsis root waxes and that FAR1/4/5 provide the fatty alcohols required for alkyl hydroxycinnamate synthesis. PMID:22797656

  11. Alkyl bicarbamates supramolecular organogelators with effective selective gelation and high oil recovery from oil/water mixtures.

    PubMed

    Wang, Yongzhen; Wu, Songquan; Yan, Xingru; Ma, Tao; Shao, Lu; Liu, Yuyan; Guo, Zhanhu

    2017-01-01

    A series of alkyl bicarbamates supramolecular organogelators were synthesized with different structures and lengths of alkyl chains. The driving forces for the self-assembly of small molecules, including the intermolecular H bonding, π-π stacking and van der Waals interactions, played an important role in the formation of different 3D network structures, i.e., fibers, ribbons, sheets, and prisms. And a probable formation process of the gel networks was proposed. Furthermore, the phase-selective gelling performances were investigated for oil removal from aqueous solution. Interestingly, the gelling properties were found to be affected by the length and structure of alkyl chains, while some gelators with intermediate alkyl chain lengths could effectively gel all the tested oils from water surface within 15 min, such as Russian crude oil, diesel, gasoline, soybean oil, peanut oil, olive oil, cyclohexane, hexane and ethyl acetate. Advantageously, fast gelation, high rate of oil removal (>95%) and excellent oil retention rate (close to 100%) were realized in the recovery of oil spills from water surface. This kind of supramolecular gelators demonstrates good potential applications in the delivery or removal of organic pollution from oil/water mixtures.

  12. Polyethylene composites containing a phase change material having a C14 straight chain hydrocarbon

    DOEpatents

    Salyer, Ival O.

    1987-01-01

    A composite useful in thermal energy storage, said composite being formed of a polyethylene matrix having a straight chain alkyl hydrocarbon incorporated therein, said polyethylene being crosslinked to such a degree that said polyethylene matrix is form stable and said polyethylene matrix is capable of absorbing at least 10% by weight of said straight chain alkyl hydrocarbon; the composite is useful in forming pellets or sheets having thermal energy storage characteristics.

  13. Reactive attachment disorder.

    PubMed

    Hornor, Gail

    2008-01-01

    Child abuse and neglect affects the lives of many American children and can result in physical injury and disability as well as psychological trauma. Reactive attachment disorder (RAD) is one possible psychological consequence of child abuse and neglect for very young children, younger than 5 years of age. RAD is described as markedly disturbed and developmentally inappropriate social relatedness usually beginning before age 5 years. These behavioral manifestations are the direct result of and come after pathogenic care. To better understand RAD, it is first necessary to understand attachment; therefore, attachment theory is examined. Risk factors for the development of RAD are presented. Implications for pediatric nurse practitioner practice are explored. The pediatric nurse practitioner can play a vital role in recognizing RAD and ensuring that children with this disorder receive prompt mental health assessment and therapy.

  14. Ceramic blade attachment system

    DOEpatents

    Boyd, Gary L.

    1994-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

  15. Ceramic blade attachment system

    DOEpatents

    Boyd, G.L.

    1994-12-13

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

  16. Monitoring DNA hybridization on alkyl modified silicon surface through capacitance measurement.

    PubMed

    Wei, Fang; Sun, Bin; Guo, Yuan; Zhao, Xin Sheng

    2003-08-15

    Single strand oligodeoxynucleotide is attached to the alkyl modified silicon surface through a peptide bond. The oligodeoxynucleotide-modified silicon substrate is used as a working electrode in an electrochemical cell system. After the electrode is treated by a solution containing strands of complementary oligodeoxynucleotide the Mott-Schottky measurements exhibit obvious negative shift in the flat band potential of the electrode, while in a control experiment treated with a solution of non-complementary oligodeoxynucleotide such a shift does not occur. The DNA hybridization is also manifested in a real time capacitance measurement. A DNA sensor based on the capacitance measurement could be more convenient than that based on a fluorescence detection.

  17. Ladder attachment platform

    DOEpatents

    Swygert,; Richard, W [Springfield, SC

    2012-08-28

    A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

  18. Internal pipe attachment mechanism

    DOEpatents

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  19. Internal pipe attachment mechanism

    DOEpatents

    Bast, Richard M.; Chesnut, Dwayne A.; Henning, Carl D.; Lennon, Joseph P.; Pastrnak, John W.; Smith, Joseph A.

    1994-01-01

    An attachment mechanism for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection.

  20. Magnetically attached sputter targets

    DOEpatents

    Makowiecki, D.M.; McKernan, M.A.

    1994-02-15

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

  1. Magnetically attached sputter targets

    DOEpatents

    Makowiecki, Daniel M.; McKernan, Mark A.

    1994-01-01

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly.

  2. Corrosion abatement in sulfuric acid alkylation unit horizontal contactors

    SciTech Connect

    Schutt, H.U.

    1997-09-01

    The need to increase throughput in alkylation plants has resulted in higher operating temperatures and higher water levels in alkylation acids than projected by design. Combined with higher flow rates, the more severe process environment causes carbon steel to corrode at increased rates. Carbon steel is the main material of construction for horizontal contactors (Stratco reactors). A leak to the atmosphere in the hydraulic end cone of one contactor and the realization that basic corrosion data are not available for high throughput process conditions in alkylation units prompted a laboratory study to develop the lacking expertise. Corrosion in alkylation unit horizontal contactors is successfully mitigated by saturating fresh alkylation acid with ferrous sulfate.

  3. Day Care and Attachment

    ERIC Educational Resources Information Center

    Portnoy, Fern C.; Simmons, Carolyn H.

    1978-01-01

    The attachment behavior of 35 white, middle-class 3 1/2- to 4-year-olds who had experienced different rearing histories was observed through a series of standardized episodes involving separations and reunions with the mother and a stranger. (Author/JMB)

  4. Attachment and Personality Disorders

    ERIC Educational Resources Information Center

    Sinha, Preeti; Sharan, Pratap

    2007-01-01

    Personality disorders (PDs) arise from core psychopathology of interpersonal relationships and understanding of self and others. The distorted representations of self and others, as well as unhealthy relationships that characterize persons with various PDs, indicate the possibility that persons with PDs have insecure attachment. Insecure…

  5. Molecular dynamics simulations of alkyl substituted nanographene crystals

    NASA Astrophysics Data System (ADS)

    Ziogos, Orestis George; Theodorou, Doros Nicolas

    2015-09-01

    Discotic polyaromatic molecules, similar to nanometric graphene flakes, constitute an interesting class of materials for organic electronic applications. Grafting flexible side chains around the periphery of such molecules enhances their processability and gives rise to diverse behaviours, such as the manifestation of liquid-crystalline character and anisotropic mechanical response. In this work, we examine by means of molecular dynamics simulations the properties of molecular crystals comprised of alkyl-substituted hexa-peri-hexabenzocoronene mesogens. Pristine and mono-substituted systems by hydrogen or iodine atoms are modelled, with variable side chain length. A general structural and mechanical robustness to peripheral substitution is reported, with the mesogens forming tightly packed molecular wires even at elevated temperature and pressure. In their discotic ordering, the molecules present relatively low translational mobility, a beneficial phenomenon for charge transport. A thermotropic dependence of the mechanical response is identified, with the systems behaving differently in their room-temperature crystalline phase and in their liquid-crystalline phase at elevated temperatures. The melting process is also examined, elucidating an initial negative expansion along a high symmetry direction and the existence of a metastable state, before falling into the final liquid-crystalline state. Dedicated to Professor Jean-Pierre Hansen, with deepest appreciation of his outstanding contributions to liquid and soft matter theory.

  6. Carbon and Hydrogen Stable Isotope Fractionation Associated with the Aerobic and Anaerobic Degradation of Saturated and Alkylated Aromatic Hydrocarbons.

    PubMed

    Musat, Florin; Vogt, Carsten; Richnow, Hans H

    2016-01-01

    Saturated hydrocarbons (alkanes) and alkylated aromatic hydrocarbons are abundant environmental compounds. Hydrocarbons are primarily removed from the environment by biodegradation, a process usually associated with moderate carbon and significant hydrogen isotope fractionation allowing monitoring of biodegradation processes in the environment. Here, we review the carbon and hydrogen stable isotope fractionation associated with the cleavage of C-H bonds at alkyl chains of hydrocarbons. Propane, n-butane and ethylbenzene were used as model components for alkyl moieties of aliphatic and aromatic hydrocarbons with emphasis on the cleavage of the C-H bond without the involvement of molecular oxygen. The carbon and hydrogen isotope fractionation factors were further used to explore the diagnostic potential for characterizing the mode of bond cleavage under oxic and anoxic conditions. x039B; factors, calculated to correlate carbon and hydrogen fractionation, allowed to distinguish between aerobic and anaerobic biodegradation processes in the environment.

  7. Metal ion hydrocarbon bidentate bonding in alkyl acetates, methyl alkanoates, alcohols and 1-alkenes: a comparative study.

    PubMed

    Burgers, Peter C; Holmes, John L; Terlouwc, Johan K

    2016-01-01

    The relative affinity of the monovalent metal ions Li(+), Na(+), Cu(+) and Ag(+) towards a series of aliphatic alkyl acetates and some selected 1-alkenes (P) was examined using the kinetic method. A detailed analysis of the dissociation characteristics of a series of mixed metal-bound dimer ions of the type P1-M(+)-P2 and the evaluated proton affinities (PAs) of the monomers shows that the affinity of the cation towards long-chain alkyl acetates and alkenes (having a chain length ≤ C4) is markedly enhanced. In line with recent studies of nitriles, alcohols and methyl alkanoates, this is attributed to a bidentate interaction of the metal ion with the functional group or double bond and the aliphatic chain. In particular, the longer chain alkyl acetates, methyl alkanoates and alcohols show a remarkably similar behaviour with respect to silver ion hydrocarbon bonding. The Ag(+) adducts of the alkyl acetates dissociate by loss of CH3COOH. This reaction becomes more pronounced at longer chain lengths, which points to metal ion bidentate formation in [Ag(+)···1-alkene] product ions having a long hydrocarbon chain. In the same vein, the heterodimers [1- hexene···Ag(+)···1-heptene] and [1- heptene···Ag(+)···1-octene] dissociate primarily into [Ag(+)···1-heptene] and [Ag(+)···1-octene] ions, respectively. Hydrocarbon bidentate formation in [Ag(+)···1-octene] also reveals itself by the reluctance of this ion to react with water in an ion trap, as opposed to [Ag(+)···1-hexene] which readily undergoes hydration.

  8. Searches for new alkylation catalysts, processes forge ahead

    SciTech Connect

    Rhodes, A.

    1994-08-22

    As a result of the hazardous properties of hydrofluoric acid (HF), HF alkylation has been the subject of much recent controversy. The safety and environmental requirements associated with the HF alkylation processes continue to drive industry to develop new alkylation technologies. In fact, several major process licensors are well on their ways to bringing these new technologies to market. The new alkylation processes under development center around new, less-harmful catalysts. Although this work is progressing rapidly, an update of the status of some of these new processes will keep refiners abreast of the new options they may soon have for building new alkylation units or retrofitting existing ones. The process development and economics are described for a Topsoe/Kellogg fixed bed alkylation process and the Kerr-McGee homogeneous alkylation technology process.

  9. Specific Conformational Change in Giant DNA Caused by Anticancer Tetrazolato-Bridged Dinuclear Platinum(II) Complexes: Middle-Length Alkyl Substituents Exhibit Minimum Effect.

    PubMed

    Komeda, Seiji; Yoneyama, Hiroki; Uemura, Masako; Muramatsu, Akira; Okamoto, Naoto; Konishi, Hiroaki; Takahashi, Hiroyuki; Takagi, Akimitsu; Fukuda, Wakao; Imanaka, Tadayuki; Kanbe, Toshio; Harusawa, Shinya; Yoshikawa, Yuko; Yoshikawa, Kenichi

    2017-01-17

    Derivatives of the highly antitumor-active compound [{cis-Pt(NH3)2}2(μ-OH)(μ-tetrazolato-N2,N3)](2+) (5-H-Y), which is a tetrazolato-bridged dinuclear platinum(II) complex, were prepared by substituting a linear alkyl chain moiety at C5 of the tetrazolate ring. The general formula for the derivatives is [{cis-Pt(NH3)2}2(μ-OH)(μ-5-R-tetrazolato-N2,N3)](2+), where R is (CH2)nCH3 and n = 0 to 8 (complexes 1-9). The cytotoxicity of complexes 1-4 in NCI-H460 human non-small-cell lung cancer cells decreased with increasing alkyl chain length, and those of complexes 5-9 increased with increasing alkyl chain length. That is, the in vitro cytotoxicity of complexes 1-9 was found to have a U-shaped association with alkyl chain length. This U-shaped association is attributable to the degree of intracellular accumulation. Although circular dichroism spectroscopic measurement indicated that complexes 1-9 induced comparable conformational changes in the secondary structure of DNA, the tetrazolato-bridged complexes induced different degrees of DNA compaction as revealed by a single DNA measurement with fluorescence microsopy, which also had a U-shaped association with alkyl chain length that matched the association observed for cytotoxicity. Complexes 7-9, which had alkyl chains long enough to confer surfactant-like properties to the complex, induced DNA compaction 20 or 1000 times more efficiently than 5-H-Y or spermidine. A single DNA measurement with transmission electron microscopy revealed that complex 8 formed large spherical self-assembled structures that induced DNA compaction with extremely high efficiency. This result suggests that these structures may play a role in the DNA compaction that was induced by the complexes with the longer alkyl chains. The derivatization with a linear alkyl chain produced a series of complexes with unique cellular accumulation and DNA conformational change profiles and a potentially useful means of developing next-generation platinum

  10. Formulation of solid lipid nanoparticles (SLN): the value of different alkyl polyglucoside surfactants.

    PubMed

    Keck, Cornelia M; Kovačević, Andjelka; Müller, Rainer H; Savić, Snežana; Vuleta, Gordana; Milić, Jela

    2014-10-20

    Alkyl polyglycosides (APGs) represent a group of nonionic tensides with excellent skin compatibility. Thus they seem to be excellent stabilizers for lipid nanoparticles for dermal application. To investigate this, different APGs were selected to evaluate their influence on the formation and characteristics of solid lipid nanoparticles (SLN). Contact angle analysis of the aqueous solutions/dispersions of the APGs on cetyl palmitate films revealed good wettability for all APG surfactants. Cetyl palmitate based SLN were prepared by hot high pressure homogenization and subjected to particle size, charge and inner structure analysis. 1% of each APG was sufficient to obtain SLN with a mean size between 150 nm and 175 nm and a narrow size distribution. The zeta potential in water was ∼ -50 mV; the values in the original medium were distinctly lower, but still sufficient high to provide good physical stability. Physical stability at different temperatures (5°C, 25°C and 40°C) was confirmed by a constant particle size over an observation period of 90 days in all dispersions. In comparison to SLN stabilized with classical surfactants, e.g., Polysorbate, APG stabilized SLN possess a smaller size, improved physical stability and contain less surfactant. Therefore, the use of APGs for the stabilization of lipid nanoparticles is superior in comparison to classical stabilizers. Further, the results indicate that the length of the alkyl chain of the APG influences the diminution efficacy, the final particle size and the crystallinity of the particles. APGs with short alkyl chain led to a faster reduction in size during high pressure homogenization, to a smaller particle size of the SLN and to a lower recrystallization index, i.e., to a lower crystallinity of the SLN. The crystallinity of the SLN increased with an increase in the alkyl chain length of APGs. Therefore, by using the tested APGs differing in the alkyl chain length, not only small sized and physically stable but

  11. Pore size effect on the dynamics of excimer formation for chemically attached pyrene on various silica surfaces

    SciTech Connect

    Dabestani, Reza T; Kidder, Michelle; Buchanan III, A C

    2008-01-01

    /pyrene is accompanied by an increase in the excimer emission on both nonporous and porous silicas. Furthermore, as the pore diameter is increased, an increase in the excimer emission is observed at similar spacer:pyrene grafting ratio. This suggests that a decrease in the separation of pyrene molecules on the surface, as the concentration of biphenyl spacer is decreased relative to pyrene, results in closer proximity of the neighboring pyrene molecules leading to the excimer emission. It is also observed that the alkyl side chain length (i.e., four carbon chain) bearing the pyrene fluorescent probe provides a more facile path for excimer formation by providing the flexibility needed for two pyrenes to reach and interact. When the alkyl side chain is removed and pyrene is directly attached to the surface, the contribution of excimer emission is diminished.

  12. Where's the Bend? Locating the First Folded Structure in Straight Chain Alkylbenzenes in a Supersonic Jet Expansion

    NASA Astrophysics Data System (ADS)

    Hewett, Daniel M.; Bocklitz, Sebastian; Suhm, Martin A.; Zwier, Timothy S.

    2016-06-01

    Alkylbenzenes make up 20-30% of petroleum fuels and are important intermediates in combustion. In gasoline, these alkyl chains are relatively short, but extend to 20 or more carbons in length in diesel fuels. While one tends to think of these chains as extending out away from the phenyl ring in an all-trans configuration, dispersive interactions between segments of the alkyl chain and between the alkyl chain and the ring will stabilize more compact geometries in which the alkyl chain folds back on itself and extends over the aromatic π cloud. This talk seeks to answer the following question: How long must the alkyl chain be before it starts to fold back over itself? Studies of the pure n-alkanes by the Suhm group have shown the turn to favorably occur for a chain about 17 carbon atoms in length. The studies presented here focus on the affect the aromatic ring has on when this turn becomes favorable. Jet-cooled laser-induced fluorescence excitation and single-conformation IR spectra have been recorded in the alkyl CH stretch region for a series of alkylbenzenes with chain lengths ranging from two to ten carbon atoms. We show, through a combination of experiment, high level calculation, and theoretical modeling, that conformations begin to form that fold back over the aromatic ring at about n=8.

  13. God attachment, mother attachment, and father attachment in early and middle adolescence.

    PubMed

    Sim, Tick Ngee; Yow, Amanda Shixian

    2011-06-01

    The present study examined the interplay of attachment to God, attachment to mother, and attachment to father with respect to adjustment (hope, self-esteem, depression) for 130 early and 106 middle adolescents in Singapore. Results showed that the parental attachments were generally linked (in expected directions) to adjustment. God attachment, however, had unique results. At the bivariate level, God attachment was only linked to early adolescents' self-esteem. When considered together with parental attachments (including interactions), God attachment did not emerge as the key moderator in attachment interactions and yielded some unexpected results (e.g., being positively linked to depression). These results are discussed viz-a-viz the secure base and safe haven functions that God and parental attachments may play during adolescence.

  14. Sulfoalkyl ether-alkyl ether cyclodextrin derivatives, their synthesis, NMR characterization, and binding of 6alpha-methylprednisolone.

    PubMed

    Tongiani, Serena; Velde, David Vander; Ozeki, Tetsuya; Stella, Valentino J

    2005-11-01

    The objective of this study is to see if random alkyl ethers of various sulfoalkyl ether cyclodextrins can be synthesized and characterized. The purpose of the alkylation was to test the hypothesis that an increase in the "height" of a cyclodextrins cavity would help in the binding/complexation of larger more structurally complex molecules. The synthesis of new cyclodextrin derivatives comprising a mixture of sulfoalkyl ether and alkyl ether substituents on the same cyclodextrin ring was performed in aqueous alkaline solutions using various sultones and alkylsulfates. The method presented provided an easy and efficient way to modify cyclodextrins avoiding the use of organic solvents and high quantities of alkylating agents and could be carried out in either a two step or "one pot" single step process. Purification was by neutralization followed by ultrafiltration. The derivatives were characterized by 1D, ((1)H and (13)C), and a 2D NMR technique (HMQC, Heteronuclear Multiple Quantum Coherence). The combination of these techniques allowed an analysis of the degree of substitution and the site of substitution on the cyclodextrin (CD) nucleus. For both beta- and gamma-CD, sulfoakylation was preferred on the 2 > 3 > 6 hydroxyls while alkylation was preferred 6 > 2 > 3. Due to the simultaneous presence of short alkyl ether chains and negatively charged sulfoalkyl ether chains, these mixed water-soluble cyclodextrin derivatives, especially those of gamma-cyclodextrin, should be able to bind more complex drugs. The improved binding capacity of these new modified CDs with the model drug 6alpha-methylprednisolone is reported.

  15. On the interaction of ionic detergents with lipid membranes. Thermodynamic comparison of n-alkyl-+N(CH₃)₃ and n-alkyl-SO₄⁻.

    PubMed

    Beck, Andreas; Li-Blatter, Xiaochun; Seelig, Anna; Seelig, Joachim

    2010-12-09

    Ionic detergents find widespread commercial applications as disinfectants, fungicides, or excipients in drug formulations and cosmetics. One mode of action is their ease of insertion into biological membranes. Very little quantitative information on this membrane-binding process is available to date. Using isothermal titration calorimetry (ITC) and dynamic light scattering (DLS), we have made a systematic comparison of the binding of cationic and anionic detergents to neutral and negatively charged lipid membranes. The detergents investigated were n-alkyl chains carrying either the trimethylammonium chloride (-(+)N(CH₃)₃Cl⁻) or the sodium sulfate (-SO₄⁻Na(+)) headgroup with chain lengths of n = 10-16. The titration of lipid vesicles into detergent solutions provided the binding enthalpy and the binding isotherm in a model-independent manner. At 25 °C the membrane binding enthalpies, ΔH(mem)(0), were small (-0.4 to -4.2 kcal/mol) and showed little correlation with the length of the alkyl chains. The ITC binding isotherms were analyzed in terms of a surface partition model. To this purpose, the surface concentration, cM, of detergent immediately above the plane of binding was calculated with the Gouy-Chapman theory. The surface concentration corrects for electrostatic attraction or repulsion and can be larger or smaller than the bulk detergent concentration, c(eq), at equilibrium. The analysis provides the chemical or hydrophobic binding constant, K(D)(0), of the detergent and the corresponding free energy. The free energies of binding, ΔG(mem)(0), vary between -4 and -10 kcal/mol. They show a linear dependence on the chain length, which can be used to separate the contributions of the polar group and the hydrocarbon tail in membrane binding. The neutral maltose and the cationic (+)N(CH₃)₃ headgroup show steric repulsion energies of about 2.5 kcal/mol counteracting the hydrophobic binding of the alkyl tail, whereas the anionic SO₄⁻ headgroup

  16. Cobalt-catalyzed hydroalkylation of [60]fullerene with active alkyl bromides: selective synthesis of monoalkylated fullerenes.

    PubMed

    Lu, Shirong; Jin, Tienan; Bao, Ming; Yamamoto, Yoshinori

    2011-08-17

    The Co-catalyzed hydroalkylation of C(60) with reactive alkyl bromides 1 (RBr) in the presence of Mn reductant and H(2)O at ambient temperature gave the monoalkylated C(60) (2) in good to high yields. The use of CoLn/Mn/H(2)O under Ar atmosphere is crucial for the success of the present transformation. The reaction most probably proceeds through the Co(0 or I) complex-promoted generation of a radical (R(•)) followed by addition to C(60). This hydroalkylation method was applied to the synthesis of zinc porphyrin attached C(60) (2l), dendrimer attached C(60) (2m), and fullerene dimer (2n), which were not easily available through the previously known methods.

  17. Effect of ionic strength and cationic DNA affinity binders on the DNA sequence selective alkylation of guanine N7-positions by nitrogen mustards

    SciTech Connect

    Hartley, J.A.; Forrow, S.M.; Souhami, R.L. )

    1990-03-27

    Large variations in alkylation intensities exist among guanines in a DNA sequence following treatment with chemotherapeutic alkylating agents such as nitrogen mustards, and the substituent attached to the reactive group can impose a distinct sequence preference for reaction. In order to understand further the structural and electrostatic factors which determine the sequence selectivity of alkylation reactions, the effect of increase ionic strength, the intercalator ethidium bromide, AT-specific minor groove binders distamycin A and netropsin, and the polyamine spermine on guanine N7-alkylation by L-phenylalanine mustard (L-Pam), uracil mustard (UM), and quinacrine mustard (QM) was investigated with a modification of the guanine-specific chemical cleavage technique for DNA sequencing. The result differed with both the nitrogen mustard and the cationic agent used. The effect, which resulted in both enhancement and suppression of alkylation sites, was most striking in the case of netropsin and distamycin A, which differed from each other. DNA footprinting indicated that selective binding to AT sequences in the minor groove of DNA can have long-range effects on the alkylation pattern of DNA in the major groove.

  18. PROCESS FOR PRODUCING ALKYL ORTHOPHOSPHORIC ACID EXTRACTANTS

    DOEpatents

    Grinstead, R.R.

    1962-01-23

    A process is given for producing superior alkyl orthophosphoric acid extractants for use in solvent extraction methods to recover and purify various metals such as uranium and vanadium. The process comprises slurrying P/sub 2/O/ sub 5/ in a solvent diluent such as kerosene, benzene, isopropyl ether, and the like. An alipbatic alcohol having from nine to seventeen carbon atoms, and w- hcrein ihc OH group is situated inward of the terminal carbon atoms, is added to the slurry while the reaction temperature is mainiained below 60 deg C. The alcohol is added in the mole ratio of about 2 to l, alcohol to P/sub 2/O/sub 5/. A pyrophosphate reaotion product is formed in the slurry-alcohol mixture. Subsequently, the pyrophosphate reaction product is hydrolyzed with dilute mineral acid to produce the desired alkyl orthophosphoric aeid extractant. The extraetant may then be separated and utilized in metal-recovery, solvent- extraction processes. (AEC)

  19. In pursuit of homoleptic actinide alkyl complexes.

    PubMed

    Seaman, Lani A; Walensky, Justin R; Wu, Guang; Hayton, Trevor W

    2013-04-01

    This Forum Article describes the pursuit of isolable homoleptic actinide alkyl complexes, starting with the pioneering work of Gilman during the Manhattan project. The initial reports in this area suggested that homoleptic uranium alkyls were too unstable to be isolated, but Wilkinson demonstrated that tractable uranium alkyls could be generated by purposeful "ate" complex formation, which serves to saturate the uranium coordination sphere and provide the complexes with greater kinetic stability. More recently, we reported the solid-state molecular structures of several homoleptic uranium alkyl complexes, including [Li(THF)4][U(CH2(t)Bu)5], [Li(TMEDA)]2[UMe6], [K(THF)]3[K(THF)2][U(CH2Ph)6]2, and [Li(THF)4][U(CH2SiMe3)6], by employing Wilkinson's strategy. Herein, we describe our attempts to extend this chemistry to thorium. The treatment of ThCl4(DME)2 with 5 equiv of LiCH2(t)Bu or LiCH2SiMe3 at -25 °C in THF affords [Th(CH2(t)Bu)5] (1) and [Li(DME)2][Th(CH2SiMe3)5 (2), respectively, in moderate yields. Similarly, the treatment of ThCl4(DME)2 with 6 equiv of K(CH2Ph) produces [K(THF)]2[Th(CH2Ph)6] (3), in good yield. Complexes 1-3 have been fully characterized, while the structures of 1 and 3 were confirmed by X-ray crystallography. Additionally, the electronic properties of 1 and 3 were explored by density functional theory.

  20. Soluble Alkyl Substituted Polygermanes. Thermochromic Behavior.

    DTIC Science & Technology

    1986-07-17

    are strongly thermochromic . The effect is attributed to conformational locking of the backbone which is caused by the crystallization of the side groups...are strongly thermochromic . The effect is attributed to the conformational locking of the backbone which is caused by the crystallization of the side...SYMBOL. 02 &m A -- .- h.. .. .. . . . . . . . . ... . . . .. RJ 5008 (52258) 1/24/86 Chemis try SOLUBLE ALKYL SUBSTITUTED POLYGERMANES: THERMOCHROMIC

  1. Theoretical kinetic study of thermal unimolecular decomposition of cyclic alkyl radicals.

    PubMed

    Sirjean, B; Glaude, P A; Ruiz-Lopèz, M F; Fournet, R

    2008-11-20

    Whereas many studies have been reported on the reactions of aliphatic hydrocarbons, the chemistry of cyclic hydrocarbons has not been explored extensively. In the present work, a theoretical study of the gas-phase unimolecular decomposition of cyclic alkyl radicals was performed by means of quantum chemical calculations at the CBS-QB3 level of theory. Energy barriers and high-pressure-limit rate constants were calculated systematically. Thermochemical data were obtained from isodesmic reactions, and the contribution of hindered rotors was taken into account. Classical transition state theory was used to calculate rate constants. The effect of tunneling was taken into account in the case of CH bond breaking. Three-parameter Arrhenius expressions were derived in the temperature range of 500-2000 K at atmospheric pressure, and the CC and CH bond breaking reactions were studied for cyclic alkyl radicals with a ring size ranging from three to seven carbon atoms, with and without a lateral alkyl chain. For the ring-opening reactions, the results clearly show an increase of the activation energy as the pi bond is being formed in the ring (endo ring opening) in contrast to the cases in which the pi bond is formed on the side chain (exo ring opening). These results are supported by analyses of the electronic charge density that were performed with Atoms in Molecules (AIM) theory. For all cycloalkyl radicals considered, CH bond breaking exhibits larger activation energies than CC bond breaking, except for cyclopentyl for which the ring-opening and H-loss reactions are competitive over the range of temperatures studied. The theoretical results compare rather well with the experimental data available in the literature. Evans-Polanyi correlations for CC and CH beta-scissions in alkyl and cycloalkyl free radicals were derived. The results highlight two different types of behavior depending on the strain energy in the reactant.

  2. The Scarlet Letter of Alkylation: A Mini Review of Selective Alkylating Agents

    PubMed Central

    Oronsky, Bryan T; Reid, Tony; Knox, Susan J; Scicinski, Jan J

    2012-01-01

    If there were a stigma scale for chemotherapy, alkylating agents would be ranked at the top of the list. The chemical term alkylation is associated with nonselective toxicity, an association that dates back to the use of nitrogen mustards during World War I as chemical warfare agents. That this stigma persists and extends to compounds that, through selectivity, attempt to “tame” the indiscriminate destructive potential of alkylation is the subject of this review. Selective alkylation, as it is referred to herein, constitutes an extremely nascent and dynamic field in oncology. The pharmacodynamic response to this selective strategy depends on a delicate kinetic balance between specificity and the rate and extent of binding. Three representative compounds are presented: RRx-001, 3-bromopyruvate, and TH-302. The main impetus for the development of these compounds has been the avoidance of the serious complications of traditional alkylating agents; therefore, it is the thesis of this review that they should not experience stigma by association. PMID:22937173

  3. Tetrahydrofurfuryloxide derivatives of alkyl aluminum species.

    SciTech Connect

    Boyle, Timothy J.; Avilucea, Gabriel; Bunge, Scott D.; Alam, Todd Michael; Rodriguez, Mark Andrew; Cherry, Brian Ray; Tissot, Ralph George, Jr.; Segall, Judith M.

    2004-12-01

    Tetrahydrofurfuryl alcohol (H-OTHF) was successfully reacted with a series of aluminum alkyls (AlR{sub 3}) to yield compounds of the general formula [R{sub 2}Al({mu}-OTHF)]{sub 2} where R = CH{sub 3} (1), CH{sub 2}CH{sub 3} (2), and CH{sub 2}CH(CH{sub 3}){sub 2} (3). Further, reactivity studies showed that the alkyls for 1 were easily exchanged, forming compounds of the general formula [Me(OR)Al({mu}-OTHF)]{sub 2} where OR = OC{sub 6}H{sub 3}(Me){sub 2}-2,6 (4), OC{sub 6}H{sub 3}(CMe{sub 3}){sub 2}-2,6 (5a), and OSi(C{sub 6}H5){sub 3} (6). For 5a, reflux temperatures were required to get the full exchange; otherwise the asymmetric derivative [Me(OR)Al({mu}-OTHF){sub 2}AlMe{sub 2}] (5b) was isolated. The bulk powders of 1-6 were found to be in agreement with the crystal structures on the basis of elemental analyses and multinuclear solid state NMR studies. Multinuclear solution state NMR studies indicate that the alkyl OTHF derivatives have cis/trans isomers due to the chiral proton on the OTHF ligand.

  4. Turbine nozzle attachment system

    DOEpatents

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  5. Turbine nozzle attachment system

    DOEpatents

    Norton, Paul F.; Shaffer, James E.

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  6. Fluorescence lifetime attachment LIFA

    NASA Astrophysics Data System (ADS)

    van der Oord, Cornelius J. R.; Stoop, Karel W. J.; van Geest, Lambertus K.

    2001-05-01

    We present the Lambert Instruments Fluorescence Lifetime Attachment LIFA. LIFA enables easy to use and affordable microscopy and macroscopic FLIM. The system implements the homodyne detection scheme for measuring the fluorescence lifetime in each pixel of the image. The microscopy system features an ultra bright LED illuminator, the LI-(mu) Cam intensified CCD camera a high frequency signal generator. The illuminator replaces the excitation light source of a standard fluorescence microscopy, while the LI-(mu) CAM intensified CCD camera is attached to the photo-port. Both the illuminator and the intensifier are modulated at a frequency up to 100 MHz at a series of phase differences. The lifetime image is calculated from the series of images on a personal computer.

  7. pi-Selective stationary phases: (II) Adsorption behavior of substituted aromatic compounds on n-alkyl-phenyl stationary phases

    SciTech Connect

    Gritti, Fabrice; Guiochon, Georges A; Mayfield, Kirsty; Dennis, Gary; Shalliker, R. Andrew

    2010-01-01

    The frontal analysis method was used to measure the adsorption isotherms of phenol, 4-chlorophenol, p-cresol, 4-methoxyphenol and caffeine on a series of columns packed with home-made alkyl-phenyl bonded silica particles. These ligands consist of a phenyl ring tethered to the silica support via a carbon chain of length ranging from 0 to 4 atoms. The adsorption isotherm models that fit best to the data account for solute-solute interactions that are likely caused by p-p interactions occurring between aromatic compounds and the phenyl group of the ligand. These interactions are the dominant factor responsible for the separation of low molecular weight aromatic compounds on these phenyl-type stationary phases. The saturation capacities depend on whether the spacer of the ligands have an even or an odd number of carbon atoms, with the even alkyl chain lengths having a greater saturation capacity than the odd alkyl chain lengths. The trends in the adsorption equilibrium constant are also significantly different for the even and the odd chain length ligands.

  8. Galleria mellonella as a novel in vivo model for assessment of the toxicity of 1-alkyl-3-methylimidazolium chloride ionic liquids.

    PubMed

    Megaw, Julianne; Thompson, Thomas P; Lafferty, Ryan A; Gilmore, Brendan F

    2015-11-01

    The larval form of the Greater Wax Moth (Galleria mellonella) was evaluated as a model system for the study of the acute in vivo toxicity of 1-alkyl-3-methylimidazolium chloride ionic liquids. 24-h median lethal dose (LD50) values for nine of these ionic liquids bearing alkyl chain substituents ranging from 2 to 18 carbon atoms were determined. The in vivo toxicity of the ionic liquids was found to correlate directly with the length of the alkyl chain substituent, and the pattern of toxicity observed was in accordance with previous studies of ionic liquid toxicity in other living systems, including a characteristic toxicity 'cut-off' effect. However, G. mellonella appeared to be more susceptible to the toxic effects of the ionic liquids tested, possibly as a result of their high body fat content. The results obtained in this study indicate that G. mellonella represents a sensitive, reliable and robust in vivo model organism for the evaluation of ionic liquid toxicity.

  9. Alkylation damage by lipid electrophiles targets functional protein systems.

    PubMed

    Codreanu, Simona G; Ullery, Jody C; Zhu, Jing; Tallman, Keri A; Beavers, William N; Porter, Ned A; Marnett, Lawrence J; Zhang, Bing; Liebler, Daniel C

    2014-03-01

    Protein alkylation by reactive electrophiles contributes to chemical toxicities and oxidative stress, but the functional impact of alkylation damage across proteomes is poorly understood. We used Click chemistry and shotgun proteomics to profile the accumulation of proteome damage in human cells treated with lipid electrophile probes. Protein target profiles revealed three damage susceptibility classes, as well as proteins that were highly resistant to alkylation. Damage occurred selectively across functional protein interaction networks, with the most highly alkylation-susceptible proteins mapping to networks involved in cytoskeletal regulation. Proteins with lower damage susceptibility mapped to networks involved in protein synthesis and turnover and were alkylated only at electrophile concentrations that caused significant toxicity. Hierarchical susceptibility of proteome systems to alkylation may allow cells to survive sublethal damage while protecting critical cell functions.

  10. Attachment and Relationships: Beyond Parenting.

    ERIC Educational Resources Information Center

    Honig, Alice Sterling

    Using a question-answer format, this paper examines the concept of attachment and its importance for parents and caregivers of young children. Twenty topics are addressed through an examination of relevant theory, research findings, and clinical evidence: (1) a "who's who" list of researchers on attachment; (2) definition of attachment;…

  11. Adopting Children with Attachment Problems.

    ERIC Educational Resources Information Center

    Hughes, Daniel A.

    1999-01-01

    Notes that attachment behavior in infants is a facet of normal child development, and that children with attachment problems require special attention during and after the adoption process. Presents actions needed to increase the probability that such children can be successfully adopted, detailed attachment patterns, and parenting strategies and…

  12. Attachment Theory: Retrospect and Prospect.

    ERIC Educational Resources Information Center

    Bretherton, Inge

    1985-01-01

    Provides overview of attachment theory as parented by John Bowlby in "Attachment and Loss". Uses two major concepts from this work to interpret refinements and elaborations of attachment theory attibuted to Mary Ainsworth. Considers how recent insights into development of socioemotional understanding and development of event…

  13. Attachment: Theoretical Development and Critique

    ERIC Educational Resources Information Center

    Slater, Ruth

    2007-01-01

    Zeanah argues that ethological attachment theory, as outlined by John Bowlby, has provided one of the most important frameworks for understanding crucial risk and protective factors in social and emotional development. However, although attachment theory and the notion of attachment disorders have influenced such initiatives, many psychologists,…

  14. Attachment as Regulation: A Commentary.

    ERIC Educational Resources Information Center

    Pipp, Sandra; Harmon, Robert J.

    1987-01-01

    Discusses ways in which Myron Hofer's work (1987), which draws on studies of rodents and primates, alters the traditional perspective on human attachment. Emphasizes the importance of the component of attachment that does not develop in explaining attachment in the first six months of life. (PCB)

  15. Lithium perchlorate-nitromethane-promoted alkylation of anilines with arylmethanols.

    PubMed

    Zhou, Jun; Mao, Hai-Feng; Wang, Lu; Zou, Jian-Ping; Zhang, Wei

    2011-11-01

    A new application of lithium perchlorate-nitromethane (LPNM) for the formation of aromatic C-N and C-C bonds is introduced. LPNM-promoted reactions of anilines with diarylmethanols selectively generate N-alkylated anilines or mono and double Friedel-Crafts alkylation products under different conditions by changing the reaction time, reaction temperature, and the ratio of the reactants. This method does not require the use of transition metal catalysts to prepare alkylated aniline derivatives.

  16. Corrosion abatement in sulfuric acid alkylation unit horizontal contactors

    SciTech Connect

    Schutt, H.U.

    1999-03-01

    A leak to the atmosphere in the hydraulic end cone of a horizontal contactor and the realization that basic corrosion data are not available for high-throughput process conditions in alkylation units prompted a laboratory study to develop the lacking expertise. Corrosion in the horizontal contractor of an alkylation unit was mitigated successfully by saturating fresh alkylation acid with ferrous sulfate (FeSO{sub 4}).

  17. Photochemical Production of Alkyl Nitrates in the Tropical Pacific Ocean

    NASA Astrophysics Data System (ADS)

    Dahl, E. E.; Yvon-Lewis, S. A.; Saltzman, E. S.

    2005-12-01

    Alkyl nitrates are important to the tropospheric NOx/ozone cycle because they represent a significant fraction of the reactive nitrogen (NOy). Previous work has shown that there is an oceanic source of alkyl nitrates. A photochemical mechanism for the formation of alkyl nitrates in seawater has been proposed. This mechanism involves the reaction of ROO and NO, where ROO is an alkyl peroxy radical. ROO and NO radicals in seawater are derived from the photolysis of DOM and nitrite, respectively. In this study, the photochemical production of low molecular weight alkyl nitrates (C1-C3) was observed in shipboard incubation experiments in the tropical Pacific during the PHASE 1 cruise. Seawater samples from several regions, including high and low-chlorophyll areas, were collected and incubated. Alkyl nitrate production rates as high as 2 nM/hour were observed. The production rate of alkyl nitrates was clearly dependent upon the initial concentration of nitrite, most likely as the source for NO radicals. While the magnitude of production varied between sample locations, the ratios of the production rates of the various alkyl nitrates remained relatively constant. The observed production ratios of methyl, ethyl, isopropyl, and n-propyl nitrate were 5.9:1.0:0.1:0.2. These ratios presumably reflect the speciation of peroxy radicals formed in seawater, and the yield of alkyl nitrates from the ROO+NO reaction. The observed production rate ratios are similar to the concentration ratios of alkyl nitrates observed in ambient seawater and the overlying atmosphere during the study. A comparison of the measured production rates and the observed concentrations, suggests that photochemically produced alkyl nitrates are a major source of atmospheric alkyl nitrates in the surface ocean and marine atmosphere.

  18. Report of the APSAC task force on attachment therapy, reactive attachment disorder, and attachment problems.

    PubMed

    Chaffin, Mark; Hanson, Rochelle; Saunders, Benjamin E; Nichols, Todd; Barnett, Douglas; Zeanah, Charles; Berliner, Lucy; Egeland, Byron; Newman, Elana; Lyon, Tom; LeTourneau, Elizabeth; Miller-Perrin, Cindy

    2006-02-01

    Although the term attachment disorder is ambiguous, attachment therapies are increasingly used with children who are maltreated, particularly those in foster care or adoptive homes. Some children described as having attachment disorders show extreme disturbances. The needs of these children and their caretakers are real. How to meet their needs is less clear. A number of attachment-based treatment and parenting approaches purport to help children described as attachment disordered. Attachment therapy is a young and diverse field, and the benefits and risks of many treatments remain scientifically undetermined. Controversies have arisen about potentially harmful attachment therapy techniques used by a subset of attachment therapists. In this report, the Task Force reviews the controversy and makes recommendations for assessment, treatment, and practices. The report reflects American Professional Society on the Abuse of Children's (APSAC) position and also was endorsed by the American Psychological Association's Division 37 and the Division 37 Section on Child Maltreatment.

  19. Comparative study of the antioxidant activities of some lipase-catalyzed alkyl dihydrocaffeates synthesized in ionic liquid.

    PubMed

    Gholivand, Somayeh; Lasekan, Ola; Tan, Chin Ping; Abas, Faridah; Wei, Leong Sze

    2017-06-01

    The solubility limitations of phenolic acids in many lipidic environments are now greatly improved by their enzymatic esterification in ionic liquids (ILs). Herein, four different ILs were tested for the esterification of dihydrocaffeic acid with hexanol and the best IL was selected for the synthesis of four other n-alkyl esters with different chain-lengths. The effect of alkyl chain length on the anti-oxidative properties of the resulted purified esters was investigated using β-carotene bleaching (BCB) and free radical scavenging method DPPH and compared with butylated hydroxytoluene (BHT) as reference compound. All four esters (methyl, hexyl, dodecyl and octadecyl dihydrocaffeates) exhibited relatively strong radical scavenging abilities. The scavenging activity of the test compounds was in the following order: methyl ester>hexyl ester⩾dodecyl ester>octadecyl ester>BHT while the order for the BCB anti-oxidative activity was; BHT>octadecyl ester>dodecyl ester>hexyl ester>methyl ester.

  20. Alkyl imidazolium ionic-liquid-mediated formation of gold particle superstructures.

    PubMed

    Ji, Qingmin; Acharya, Somobrata; Richards, Gary J; Zhang, Shaoling; Vieaud, Julien; Hill, Jonathan P; Ariga, Katsuhiko

    2013-06-18

    The development of new methodologies for controlling the organization of quantum materials in multiple dimensions is crucial to the advancement of device fabrication. By using a self-assembly route using selected imidazolium ionic liquids bearing long alkyl chains (C(n)Imida, n = 8, 10, 12) as ligands, we have achieved a tunable assembly of quantum-sized gold nanoparticles. The initial stabilizer of the gold nanoparticles was partially or wholly substituted depending on the concentration and alkyl chain length. π-π interactions between imidazolium rings also promote the generation of spatially controlled aggregates from the nanometer to micrometer size regimes. In particular, in the case of an imidazolium ionic liquid with decyl chains, gold particles assemble into a core-shell spherical superstructure induced by the aggregation of imidazolium ionic liquid molecules during ligand exchange. Conceptually, the assemblies of nanoparticles mimic biological systems and provide strategies for the organization of single-component nanomaterials into functional assemblies for potential applications. Our approach is general and can be applied to other types of nanomaterials for facile manipulation of the assembly processes, permitting an exploration of physicochemical properties as well as technological applications.

  1. Stability of vertical magnetic chains

    PubMed Central

    2017-01-01

    A linear stability analysis is performed for a pair of coaxial vertical chains made from permanently magnetized balls under the influence of gravity. While one chain rises from the ground, the other hangs from above, with the remaining ends separated by a gap of prescribed length. Various boundary conditions are considered, as are situations in which the magnetic dipole moments in the two chains are parallel or antiparallel. The case of a single chain attached to the ground is also discussed. The stability of the system is examined with respect to three quantities: the number of balls in each chain, the length of the gap between the chains, and a single dimensionless parameter which embodies the competition between magnetic and gravitational forces. Asymptotic scaling laws involving these parameters are provided. The Hessian matrix is computed in exact form, allowing the critical parameter values at which the system loses stability and the respective eigenmodes to be determined up to machine precision. A comparison with simple experiments for a single chain attached to the ground shows good agreement. PMID:28293135

  2. Stability of vertical magnetic chains

    NASA Astrophysics Data System (ADS)

    Schönke, Johannes; Fried, Eliot

    2017-02-01

    A linear stability analysis is performed for a pair of coaxial vertical chains made from permanently magnetized balls under the influence of gravity. While one chain rises from the ground, the other hangs from above, with the remaining ends separated by a gap of prescribed length. Various boundary conditions are considered, as are situations in which the magnetic dipole moments in the two chains are parallel or antiparallel. The case of a single chain attached to the ground is also discussed. The stability of the system is examined with respect to three quantities: the number of balls in each chain, the length of the gap between the chains, and a single dimensionless parameter which embodies the competition between magnetic and gravitational forces. Asymptotic scaling laws involving these parameters are provided. The Hessian matrix is computed in exact form, allowing the critical parameter values at which the system loses stability and the respective eigenmodes to be determined up to machine precision. A comparison with simple experiments for a single chain attached to the ground shows good agreement.

  3. Alkyl Chlorides as Hydrogen Bond Acceptors

    SciTech Connect

    Nadas, Janos I; Vukovic, Sinisa; Hay, Benjamin

    2012-01-01

    To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

  4. Ceramic blade attachment system

    DOEpatents

    Frey, deceased, Gary A.; Jimenez, Oscar D.

    1996-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

  5. Ceramic blade attachment system

    DOEpatents

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  6. Neighborhood Quality and Attachment

    PubMed Central

    Poortinga, Wouter; Calve, Tatiana; Jones, Nikki; Lannon, Simon; Rees, Tabitha; Rodgers, Sarah E.; Lyons, Ronan A.; Johnson, Rhodri

    2016-01-01

    Various studies have shown that neighborhood quality is linked to neighborhood attachment and satisfaction. However, most have relied upon residents’ own perceptions rather than independent observations of the neighborhood environment. This study examines the reliability and validity of the revised Residential Environment Assessment Tool (REAT 2.0), an audit instrument covering both public and private spaces of the neighborhood environment. The research shows that REAT 2.0 is a reliable, easy-to-use instrument and that most underlying constructs can be validated against residents’ own neighborhood perceptions. The convergent validity of the instrument, which was tested against digital map data, can be improved for a number of miscellaneous urban form items. The research further found that neighborhood attachment was significantly associated with the overall REAT 2.0 score. This association can mainly be attributed to the property-level neighborhood quality and natural elements components. The research demonstrates the importance of private spaces in the outlook of the neighborhood environment. PMID:28260806

  7. C5'-Alkyl Substitution Effects on Digitoxigenin α-l-Glycoside Cancer Cytotoxicity.

    PubMed

    Wang, Hua-Yu Leo; Qi, Zhang; Wu, Bulan; Kang, Sang-Woo; Rojanasakul, Yon; O'Doherty, George A

    2011-04-14

    A highly regio- and stereo-selective asymmetric synthesis of various C5'-alkyl side chains of rhamnosyl- and amicetosyl-digitoxigenin analogs has been established via palladium-catalyzed glycosylation with post-glycosylated dihydroxylation or diimide reduction. The C5'-methyl group in both α-l-rhamnose and α-l-amicetose digitoxin analogs displayed a steric directed apoptosis induction and tumor growth inhibition against non-small cell human lung cancer cells (NCI-H460). The anti-tumor activity is significantly reduced when the steric hindrance is increased at C5'-stereocenter.

  8. Hyaluronic acid alkyl derivative: A novel inhibitor of metalloproteases and hyaluronidases.

    PubMed

    Pavan, Mauro; Galesso, Devis; Secchieri, Cynthia; Guarise, Cristian

    2016-03-01

    Extracellular matrix (ECM) degradation, one of the main features of osteoarthritis, is driven by at least two major classes of enzymes: matrix metalloproteases (MMPs) and hyaluronidases. Among certain glycosaminoglycans, including natural and chemically cross-linked HAs, which are currently used as viscosupplements, the hyaluronic acid (HA) alkyl-amides (Hyadd) were here selected as the strongest MMP and hyaluronidase inhibitors. We used C. histolyticum collagenase (ChC) and bovine testicular hyaluronidase (BTH) as representative models of human MMPs and hyaluronidases, respectively. The role of the alkyl moiety was investigated using HA derivatives with varying alkyl lengths and degrees of derivatization. The selected compound was then screened against 10 different human MMPs in vitro, and the results were validated ex vivo in human synovial fluid. Hyadd-C16, identified as a lead compound, showed the highest inhibition potency against MMP13 and MMP8. The in vitro results were confirmed by the inhibition of human MMP13 (Ki=106.1 μM) and hyaluronidase-2 in the synovial fluid of patients with osteoarthritis. This study demonstrates the unique properties of Hyadd-C16, including its remarkable enzymatic inhibitory activity, which is conferred by the hydrophobic chain, and its high biocompatibility and water solubility of the HA backbone.

  9. Diarmed (adamantyl/alkyl) surfactants from nitrilotriacetic acid.

    PubMed

    Trillo, Juan V; Vázquez Tato, José; Jover, Aida; de Frutos, Santiago; Soto, Victor H; Galantini, Luciano; Meijide, Francisco

    2014-11-01

    The compounds presented here constitute a clear example of molecular biomimetics as their design is inspired on the structure and properties of natural phospholipids. Thus novel double-armed surfactants have been obtained in which nitrilotriacetic acid plays the role of glycerol in phospholipids. The hydrophobic arms are linked to the head group through amide bonds (which is also the case of sphingomyelin): (R1NHCOCH2)(R2NHCOCH2)NCH2CO2H (R1 being CH3(CH2)11, CH3(CH2)17, CH3(CH2)7CHCH(CH2)8, and adamantyl, and R2=adamantyl). The dependence of the surface tension with concentration shows the typical profile of surfactants since a breaking point, which corresponds to the critical aggregation concentration (cac), is observed in all cases. The cac of these diarmed derivatives are about 1-3 orders of magnitude lower than those of classical monoalkyl derivatives used as reference compounds. In contrast to conventional surfactants, reversed trends in cac values and molecular areas at the solution-air interface have been observed. This anomalous behavior is tied to the structure of the surfactants and suggests that long and flexible alkyl chains should self-coil previous to the aggregation or adsorption phenomena. Above cac all compounds form large aggregates, globular in shape, which tend to associate forming giant aggregates.

  10. Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice

    SciTech Connect

    Daoudi, El Mehdi; Boughaleb, Yahia; El Gaini, Layla; Meghea, Irina; Bakasse, Mina

    2013-05-15

    Highlights: ► The modification of montmorillonites by three surfactants increases the basal spacing. ► The model proposed show a bilayer conformation for the surfactant ODTMA. ► The DODMA and TOMA surfactants adopt a paraffin type arrangement. ► Behavior of surfactants in interlayer space was confirmed by TGA and ATR analysis. - Abstract: The objective of this work was to study the conformation of the quaternary ammonium cations viz., octadecyl trimethyl ammonium (ODTMA), dioctadecyl dimethyl ammonium (DMDOA) and trioctadecyl methyl ammonium (TOMA) intercalated within montmorillonite. The modified montmorillonite was characterized by X-ray diffraction in small angle (SAXS), thermal analysis (TGA) and infrared spectroscopy of attenuated total reflection (ATR). The modification of organophilic montmorillonites by the three surfactants ODTMA, DMDOA and TOMA increases the basal spacing from their respective intercalated distances of 1.9 nm, 2.6 nm and 3.4 nm respectively. The increase in the spacing due to the basic organic modification was confirmed by the results of thermal analysis (TGA) and infrared spectroscopy (ATR), and also supported by theoretical calculations of longitudinal and transversal chain sizes of these alkyl quaternary ammonium cations.

  11. Multifunctional poly(alkyl methacrylate) films for dental care.

    PubMed

    Nielsen, Birthe V; Nevell, Thomas G; Barbu, Eugen; Smith, James R; Rees, Gareth D; Tsibouklis, John

    2011-02-01

    Towards the evaluation of non-permanent dental coatings for their capacity to impart dental-care benefits, thin films of a homologous series of comb-like poly(alkyl methacrylate)s (ethyl to octadecyl) have been deposited, from aqueous latex formulations, onto dentally relevant substrates. AFM studies have shown that the thickness (40-300 nm) and surface roughness (8-12 nm) of coherent polymer films are influenced by the degree of polymerization and by the length of the pendant chain. Of the polymers under consideration, poly(butyl methacrylate) formed a close-packed film that conferred to dental substrates a high degree of inhibition to acid-mediated erosion (about 27%), as evaluated by released-phosphate determinations. The potential utility of the coatings to act as anti-sensitivity barriers has been evaluated by determining the hydraulic conductance of coated bovine-dentine substrates; single treatments of dentine discs with poly(butyl methacrylate) or with poly(ethyl methacrylate) effected mean respective reductions in fluid flow of about 23% with respect to water-treated controls; repeated applications of the poly(butyl methacrylate) latex led to mean reductions in fluid flow of about 80%. Chromometric measurements have shown that pellicle-coated hydroxyapatite discs treated with poly(butyl methacrylate), poly(hexyl methacrylate) or poly(lauryl methacrylate) exhibit significant resistance to staining by food chromogens.

  12. Determination of reaction rate constants for alkylation of 4-(p-nitrobenzyl) pyridine by different alkylating agents.

    PubMed

    Walles, S A

    1980-02-01

    The rate constants have been determined for the reaction between some different alkylating agents and 4-(p-nitrobenzyl) pyridine (NBP) in methanol. These constants have been compared with those for alkylation of aniline in water. All the constants were lower in methanol than in water but in different degrees. The rate constants of the different alkylating agents have been calculated at a nucleophilic strength n=2. The genetic risk defined as the degree of alkylation of a nucleophile (n=2) is equivalent to the rate constant kn=2 and the target dose. The dependence of the genetic risk on the rate constant (kn=2) is discussed.

  13. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  14. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  15. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  16. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  17. Falling chains

    NASA Astrophysics Data System (ADS)

    Wong, Chun Wa; Yasui, Kosuke

    2006-06-01

    The one-dimensional fall of a folded chain with one end suspended from a rigid support and a chain falling from a resting heap on a table is studied. Because their Lagrangians contain no explicit time dependence, the falling chains are conservative systems. Their equations of motion are shown to contain a term that enforces energy conservation when masses are transferred between subchains. We show that Cayley's 1857 energy nonconserving solution for a chain falling from a resting heap is incorrect because it neglects the energy gained when a link leaves a subchain. The maximum chain tension measured by Calkin and March for the falling folded chain is given a simple if rough interpretation. Other aspects of the falling folded chain are briefly discussed.

  18. Rational design of novel N-alkyl-N capped biostable RNA nanostructures for efficient long-term inhibition of gene expression

    PubMed Central

    Terrazas, Montserrat; Ivani, Ivan; Villegas, Núria; Paris, Clément; Salvans, Cándida; Brun-Heath, Isabelle; Orozco, Modesto

    2016-01-01

    Computational techniques have been used to design a novel class of RNA architecture with expected improved resistance to nuclease degradation, while showing interference RNA activity. The in silico designed structure consists of a 24–29 bp duplex RNA region linked on both ends by N-alkyl-N dimeric nucleotides (BCn dimers; n = number of carbon atoms of the alkyl chain). A series of N-alkyl-N capped dumbbell-shaped structures were efficiently synthesized by double ligation of BCn-loop hairpins. The resulting BCn-loop dumbbells displayed experimentally higher biostability than their 3′-N-alkyl-N linear version, and were active against a range of mRNA targets. We studied first the effect of the alkyl chain and stem lengths on RNAi activity in a screen involving two series of dumbbell analogues targeting Renilla and Firefly luciferase genes. The best dumbbell design (containing BC6 loops and 29 bp) was successfully used to silence GRB7 expression in HER2+ breast cancer cells for longer periods of time than natural siRNAs and known biostable dumbbells. This BC6-loop dumbbell-shaped structure displayed greater anti-proliferative activity than natural siRNAs. PMID:26975656

  19. Radioiodination of Aryl-Alkyl Cyclic Sulfates

    PubMed Central

    Mushti, Chandra; Papisov, Mikhail I.

    2015-01-01

    Among the currently available positron emitters suitable for Positron Emission Tomography (PET), 124I has the longest physical half-life (4.2 days). The long half-life and well-investigated behavior of iodine in vivo makes 124I very attractive for pharmacological studies. In this communication, we describe a simple yet effective method for the synthesis of novel 124I labeled compounds intended for PET imaging of arylsulfatase activity in vivo. Arylsulfatases have important biological functions, and genetic deficiencies of such functions require pharmacological replacement, the efficacy of which must be properly and non-invasively evaluated. These enzymes, even though their natural substrates are mostly of aliphatic nature, hydrolyze phenolic sulfates to phenol and sulfuric acid. The availability of [124I]iodinated substrates is expected to provide a PET-based method for measuring their activity in vivo. The currently available methods of synthesis of iodinated arylsulfates usually require either introducing of a protected sulfate ester early in the synthesis or introduction of sulfate group at the end of synthesis in a separate step. The described method gives the desired product in one step from an aryl-alkyl cyclic sulfate. When treated with iodide, the source cyclic sulfate opens with substitution of iodide at the alkyl center and gives the desired arylsulfate monoester. PMID:23135631

  20. Microstructure of Hydrophobically Modified Alkyl Acrylamide Hydrogels

    NASA Astrophysics Data System (ADS)

    Tian, Jun; Seery, Thomas A. P.; Ho, Derek L.; Weiss, R. A.

    2004-03-01

    Hydrophobically modified water-soluble acrylamide polymers have a variety of applications, including viscosity thickeners, microencapsulation, biosensors and controlled drug delivery systems. The microstructure of copolymer hydrogels of N,N-dimethylacrylamide (DMA) or N-isopropylacrylamide(NIPA) modified with 2-(N-ethylfluorooctanesulfonamido)ethyl acrylate, FOSA, was studied by small angle x-ray (SAXS) and neutron scattering (SANS). Swelling and DSC measurements showed that FOSA/NIPA gels exhibited a volume phase transition (VPT), but that FOSA/DMA gels did not. A modified interacting core-shell model was used to explain the SAXS and SANS data for both gels. The crosslink junctions of the gel consisted of nanophase-separated FOSA domains as the core surrounded by a water-poor layer of the alkyl acrylamide. These nanodomains were dispersed in a matrix of water-swollen alkyl acrylamide that had large scale heterogeneities. The average spherical core radius ranged from 1 to 3 nm and the average shell thickness ranged from 1 to 1.5 nm; the aggregation number ranged from 10 to 200.

  1. ESCHERICHIA COLI Gene Induction by Alkylation Treatment

    PubMed Central

    Volkert, Michael R.; Nguyen, Dinh C.; Beard, K. Christopher

    1986-01-01

    Searches for alkylation-inducible (aid) genes of Escherichia coli have been conducted by screening random fusions of the Mu-dl(ApR lac) phage for fusions showing increased β-galactosidase activity after treatment with methylating agents, but not after treatments with UV-irradiation. In this report we describe gene fusions that are specifically induced by alkylation treatments. Nine new mutants are described, and their properties are compared with the five mutants described previously. The total of 14 fusion mutants map at five distinct genetic loci. They can be further subdivided on the basis of their induction by methyl methanesulfonate (MMS) and N-methyl-N'-nitro-N-nitrosoguanidine (MNNG). alkA, aidB and aidD are induced by both agents and appear to be regulated by ada. Neither aidC nor aidI is regulated by ada. Moreover, since aidC is induced only by MNNG and aidI is induced only by MMS, these two genes are likely to be individually regulated. Thus, there appear to be at least three different regulatory mechanisms controlling aid genes. PMID:3080354

  2. Escherichia coli gene induction by alkylation treatment.

    PubMed

    Volkert, M R; Nguyen, D C; Beard, K C

    1986-01-01

    Searches for alkylation-inducible (aid) genes of Escherichia coli have been conducted by screening random fusions of the Mu-dl(ApR lac) phage for fusions showing increased beta-galactosidase activity after treatment with methylating agents, but not after treatments with UV-irradiation. In this report we describe gene fusions that are specifically induced by alkylation treatments. Nine new mutants are described, and their properties are compared with the five mutants described previously. The total of 14 fusion mutants map at five distinct genetic loci. They can be further subdivided on the basis of their induction by methyl methanesulfonate (MMS) and N-methyl-N' -nitro-N-nitrosoguanidine (MNNG). alkA, aidB and aidD are induced by both agents and appear to be regulated by ada. Neither aidC nor aidI is regulated by ada. Moreover, since aidC is induced only by MNNG and aidI is induced only by MMS, these two genes are likely to be individually regulated. Thus, there appear to be at least three different regulatory mechanisms controlling aid genes.

  3. The photodissociation dynamics of alkyl radicals

    SciTech Connect

    Giegerich, Jens; Fischer, Ingo

    2015-01-28

    The photodisscociation dynamics of the alkyl radicals i-propyl (CH(CH{sub 3}){sub 2}) and t-butyl (C(CH{sub 3}){sub 3}) are investigated by H-atom photofragment imaging. While i-propyl is excited at 250 nm, the photodynamics of t-butyl are explored over a large energy range using excitation wavelengths between 347 nm and 233 nm. The results are compared to those obtained previously for ethyl, CH{sub 3}CH{sub 2}, and to those reported for t-butyl using 248 nm excitation. The translational energy (E{sub T}) distribution of the H-atom photofragments is bimodal and appears rather similar for all three radicals. The low E{sub T} part of the distribution shows an isotropic photofragment angular distribution, while the high E{sub T} part is associated with a considerable anisotropy. Thus, for t-butyl, two H-atom loss channels of roughly equal importance have been identified in addition to the CH{sub 3}-loss channel reported previously. A mechanism for the photodissociation of alkyl radicals is suggested that is based on interactions between Rydberg- and valence states.

  4. Ceramic blade attachment system

    DOEpatents

    Shaffer, James E.

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  5. Ceramic blade attachment system

    DOEpatents

    Shaffer, J.E.

    1995-01-10

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

  6. Ceramic blade attachment system

    DOEpatents

    Shaffer, J.E.

    1995-07-11

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

  7. Ceramic blade attachment system

    DOEpatents

    Shaffer, James E.

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  8. Synthesis and evaluation of DNA-targeted spatially separated bis(aniline mustards) as potential alkylating agents with enhanced DNA cross-linking capability.

    PubMed

    Gourdie, T A; Prakash, A S; Wakelin, L P; Woodgate, P D; Denny, W A

    1991-01-01

    DNA-targeted separated bis-mustards were synthesized by attaching aniline mono-mustards at the 4- and 9-positions of the DNA-intercalating ligand 9-aminoacridine-4-carboxamide, with the intention of improving the low cross-link to monoadduct ratio found with most alkylating agents. The geometry of these compounds requires that, when the acridine binds to DNA by intercalation, one alkylating moiety is delivered to each DNA groove. Gel electrophoretic studies show that only one arm of these compounds (probably that attached to the 9-position) alkylates DNA, such alkylation occurring specifically in the major groove at the N7 of guanines. Cell-line studies confirm that the mode of cytotoxicity of these compounds (unlike that of untargeted aniline bis-mustards of comparable reactivity) is due to bulky DNA monoadduct formation. It is concluded that more information is required about the exact orientation of the initial monoadducts before ligands with specific DNA cross-linking ability can be designed.

  9. Fluorescence properties of a novel side-chain polymer based on polyamic acid

    NASA Astrophysics Data System (ADS)

    Lu, Jianmei; Yao, Shechun; Tang, Xiubo; Sun, Ming; Zhu, Xiulin

    2004-05-01

    The p-π conjugated polyamic acid (PAA) had been synthesized through 1,4-diaminoanthraquinone (DAAQ) and pyromellitic dianhydride (PMDA) under microwave irradiation. The graft PAAs were obtained by toluene-2,4-diisocyanate (TDI) derivatives having different straight-chain alkyl. The resulted graft polymers had good dissolution capabilities, film-forming capabilities and strong fluorescence. We investigated some factors influencing fluorescence performance on graft PAA and found that with increasing chain length of the straight-chain alkyl or increasing graft degree, the fluorescence intensity and quantum efficiency will be enhanced markedly.

  10. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  11. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  12. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  13. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  14. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  15. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  16. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  17. 40 CFR 721.10317 - Alkyl phosphate derivative (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl phosphate derivative (generic... Specific Chemical Substances § 721.10317 Alkyl phosphate derivative (generic). (a) Chemical substance and... phosphate derivative (PMN P-02-1040) is subject to reporting under this section for the significant new...

  18. 40 CFR 721.10317 - Alkyl phosphate derivative (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phosphate derivative (generic... Specific Chemical Substances § 721.10317 Alkyl phosphate derivative (generic). (a) Chemical substance and... phosphate derivative (PMN P-02-1040) is subject to reporting under this section for the significant new...

  19. 40 CFR 721.10317 - Alkyl phosphate derivative (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl phosphate derivative (generic... Specific Chemical Substances § 721.10317 Alkyl phosphate derivative (generic). (a) Chemical substance and... phosphate derivative (PMN P-02-1040) is subject to reporting under this section for the significant new...

  20. Organocatalytic enantioselective indole alkylations of alpha,beta-unsaturated ketones.

    PubMed

    Chen, Wei; Du, Wei; Yue, Lei; Li, Rui; Wu, Yong; Ding, Li-Sheng; Chen, Ying-Chun

    2007-03-07

    The C3-selective enantioselective Michael-type Friedel-Crafts alkylations of indoles with nonchelating alpha,beta-unsaturated alkyl ketones, catalysed by a chiral primary amine derived from natural cinchonine, were investigated. The reactions, in the presence of 30 mol% catalyst, were smoothly conducted at 0 to -20 degrees C. Moderate to good ee (47-89%) has been achieved.

  1. An overview of the properties of fatty acid alkyl esters

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fatty acid alkyl esters of plant oils, especially in the form of methyl esters, have numerous applications with fuel use having received the most attention in recent times due to the potential high volume. Various properties imparted by neat fatty acid alkyl esters have been shown to influence fuel ...

  2. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  3. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  4. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  5. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  6. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  7. 40 CFR 721.10073 - Modified alkyl acrylamide (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified alkyl acrylamide (generic... Specific Chemical Substances § 721.10073 Modified alkyl acrylamide (generic). (a) Chemical substance and... acrylamide (PMN P-05-536) is subject to reporting under this section for the significant new uses...

  8. 40 CFR 721.10073 - Modified alkyl acrylamide (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Modified alkyl acrylamide (generic... Specific Chemical Substances § 721.10073 Modified alkyl acrylamide (generic). (a) Chemical substance and... acrylamide (PMN P-05-536) is subject to reporting under this section for the significant new uses...

  9. 40 CFR 721.10073 - Modified alkyl acrylamide (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Modified alkyl acrylamide (generic... Specific Chemical Substances § 721.10073 Modified alkyl acrylamide (generic). (a) Chemical substance and... acrylamide (PMN P-05-536) is subject to reporting under this section for the significant new uses...

  10. 40 CFR 721.10073 - Modified alkyl acrylamide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Modified alkyl acrylamide (generic... Specific Chemical Substances § 721.10073 Modified alkyl acrylamide (generic). (a) Chemical substance and... acrylamide (PMN P-05-536) is subject to reporting under this section for the significant new uses...

  11. 40 CFR 721.10073 - Modified alkyl acrylamide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Modified alkyl acrylamide (generic... Specific Chemical Substances § 721.10073 Modified alkyl acrylamide (generic). (a) Chemical substance and... acrylamide (PMN P-05-536) is subject to reporting under this section for the significant new uses...

  12. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  13. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  14. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  15. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  16. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  17. Degradable Polymer Composites Fabricated from Starch and Alkyl Cyanoacrylate Monomer

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Degradable polymer composites are fabricated from alkyl cyanoacrylate monomer and starch without special equipment. Alkyl cyanoacrylate, which is a major component of “super glue”, is a monomer that polymerizes at room temperature in the presence of initiators. During the fabrication of polymer com...

  18. Deaminative and decarboxylative catalytic alkylation of amino acids with ketones.

    PubMed

    Kalutharage, Nishantha; Yi, Chae S

    2013-12-16

    It cuts two ways: The cationic [Ru-H] complex catalyzes selective coupling of α- and β-amino acids with ketones to form α-alkylated ketone products. The reaction involves CC and CN bond cleavage which result in regio- and stereoselective alkylation using amino acids. A broad substrate scope and high functional-group tolerance is demonstrated.

  19. Direct, Regioselective N-Alkylation of 1,3-Azoles.

    PubMed

    Chen, Shuai; Graceffa, Russell F; Boezio, Alessandro A

    2016-01-04

    Regioselective N-alkylation of 1,3-azoles is a valuable transformation. Organomagnesium reagents were discovered to be competent bases to affect regioselective alkylation of various 1,3-azoles. Counterintuitively, substitution selectively occurred at the more sterically hindered nitrogen atom. Numerous examples are provided, on varying 1,3-azole scaffolds, with yields ranging from 25 to 95%.

  20. 40 CFR 721.10677 - Alkyl phosphonate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10677 Alkyl phosphonate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl phosphonate (PMN...

  1. 40 CFR 721.10711 - Alkyl substituted catechol (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl substituted catechol (generic... Specific Chemical Substances § 721.10711 Alkyl substituted catechol (generic). (a) Chemical substance and... substituted catechol (PMN P-13-197) is subject to reporting under this section for the significant new...

  2. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  3. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  4. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  5. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  6. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  7. Sentence-Level Attachment Prediction

    NASA Astrophysics Data System (ADS)

    Albakour, M.-Dyaa; Kruschwitz, Udo; Lucas, Simon

    Attachment prediction is the task of automatically identifying email messages that should contain an attachment. This can be useful to tackle the problem of sending out emails but forgetting to include the relevant attachment (something that happens all too often). A common Information Retrieval (IR) approach in analyzing documents such as emails is to treat the entire document as a bag of words. Here we propose a finer-grained analysis to address the problem. We aim at identifying individual sentences within an email that refer to an attachment. If we detect any such sentence, we predict that the email should have an attachment. Using part of the Enron corpus for evaluation we find that our finer-grained approach outperforms previously reported document-level attachment prediction in similar evaluation settings.

  8. Elderly-animal postmortem attachment.

    PubMed

    Peretti, P O

    1990-01-01

    Attachment can be strong between people and their pets. The present study was conducted to determine: (1) specific variables associated with the final rite and disposition of the deceased pet, and (2) those criteria associated with emotional and social factors pertaining to elderly-animal postmortem attachment. Results suggested four most frequently stated variables of final rite and disposition, and eight emotional and social factors of elderly-animal postmortem attachment.

  9. An overview of frenal attachments

    PubMed Central

    Priyanka, M.; Sruthi, R.; Ramakrishnan, T.; Emmadi, Pamela; Ambalavanan, N.

    2013-01-01

    Frenal attachments are thin folds of mucous membrane with enclosed muscle fibers that attach the lips to the alveolar mucosa and underlying periosteum. Most often, during the oral examination of the patient the dentist gives very little importance to the frenum, for assessing its morpholology and attachment. However, it has been seen that an abnormal frenum can be an indicator of a syndrome. This paper highlights the different frenal attachments seen in association with various syndromic as well as non-syndromic conditions. PMID:23633765

  10. Enzymic aromatization of 6-alkyl-substituted androgens, potent competitive and mechanism-based inhibitors of aromatase.

    PubMed

    Numazawa, M; Yoshimura, A; Oshibe, M

    1998-01-01

    To gain insight into the relationships between the aromatase inhibitory activity of 6-alkyl-substituted androgens, potent competitive inhibitors, and their ability to serve as a substrate of aromatase, we studied the aromatization of a series of 6alpha- and 6beta-alkyl (methyl, ethyl, n-propyl, n-pentyl and n-heptyl)-substituted androst-4-ene-3,17-diones (ADs) and their androsta-1,4-diene-3,17-dione (ADD) derivatives with human placental aromatase, by gas chromatography-mass spectrometry. Among the inhibitors examined, ADD and its 6alpha-alkyl derivatives with alkyl functions less than three carbons long, together with 6beta-methyl ADD, are suicide substrates of aromatase. All of the steroids, except for 6beta-n-pentyl ADD and its n-heptyl analogue as well as 6beta-n-heptyl AD, were found to be converted into the corresponding 6-alkyl oestrogens. The 6-methyl steroids were aromatized most efficiently in each series, and the aromatization rate essentially decreased in proportion to the length of the 6-alkyl chains in each series, where the 6alpha-alkyl androgens were more efficient substrates than the corresponding 6beta isomers. The Vmax of 6alpha-methyl ADD was approx. 2.5-fold that of the natural substrate AD and approx. 3-fold that of the parent ADD. On the basis of this, along with the facts that the rates of a mechanism-based inactivation of aromatase by ADD and its 6alpha-methyl derivative are similar, it is implied that alignment of 6alpha-methyl ADD in the active site could favour the pathway leading to oestrogen over the inactivation pathway, compared with that of ADD. The relative apparent Km values for the androgens obtained in this study are different from the relative Ki values obtained previously, indicating that there is a difference between the ability to serve as an inhibitor and the ability to serve as a substrate in the 6-alkyl androgen series.

  11. Alkylation of terminal alkynes with transient σ-alkylpalladium(II) complexes: a carboalkynylation route to alkyl-substituted alkynes.

    PubMed

    Zhou, Ming-Bo; Huang, Xiao-Cheng; Liu, Yan-Yun; Song, Ren-Jie; Li, Jin-Heng

    2014-02-10

    A mild and general alkylation of terminal alkynes with transient σ-alkylpalladium(II) complexes for assembling alkyl-substituted alkynes is described. This method represents a new way to the use of transient σ-alkylpalladium(II) complexes in organic synthesis through 1,2-carboalkynylation of alkenes.

  12. Cu(I)-Catalyzed Enantioselective Friedel-Crafts Alkylation of Indoles with 2-Aryl-N-sulfonylaziridines as Alkylating Agents.

    PubMed

    Ge, Chen; Liu, Ren-Rong; Gao, Jian-Rong; Jia, Yi-Xia

    2016-07-01

    A highly enantioselective Friedel-Crafts alkylation of indoles with N-sulfonylaziridines as alkylating agents has been developed by utilizing the complex of Cu(CH3CN)4BF4/(S)-Segphos as a catalyst. A range of optically active tryptamine derivatives are obtained in good to excellent yields and enantioselectivities (up to >99% ee) via a kinetic resolution process.

  13. Covalent attachment of lysozyme to cotton/cellulose materials: protein verses solid support activation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Covalent attachment of enzymes to cellulosic materials like cotton is of interest where either release or loss of enzyme activity over time needs to be avoided. The covalent attachment of an enzyme to a cellulosic substrate requires either activation of a protein side chain or an organic functional ...

  14. N-Chlorosuccinimide-mediated oxidative chlorination of thiols to Nα-protected amino alkyl sulfonyl azides and their utility in the synthesis of sulfonyl triazole acids.

    PubMed

    Sharnabai, K M; Krishnamurthy, M; Sagar, N R; Santhosh, L; Vommina, Sureshbabu V

    2016-11-30

    An efficient oxidative chlorination of thiols to Nα-protected amino alkyl sulfonyl azides is delineated. The reaction involves in situ generation of sulfonyl chloride employing N-chlorosuccinimide and tetrabutylammonium chloride-water in acetonitrile, followed by the reaction with sodium azide. The protocol is simple, straight forward, mild and high yielding. Amino acids with simple as well as bifunctional side chains were used to obtain Nα-protected amino alkyl sulfonyl azides. Further, sulfonyl azides were utilized to synthesize unnatural amino acids via Cu(OAc)2.H2O/2-amino phenol catalyzed Click reaction with propiolic acid.

  15. Materials performance in HF-alkylation units

    SciTech Connect

    Forsen, O.; Aromaa, J.; Somervuori, M.; Tavi, M.

    1995-11-01

    Materials selection in HF-alkylation units is mostly based on long time experience. The most widely used material in the Station units is standard carbon steel, because it is capable to form a thick protective FeF{sub 2} layer in concentrated or anhydrous hydrofluoric acid. The corrosion resistance decreases, when the acid is dilute (less than 64% HF) or the temperature is above 160F (70 C). The composition and metallurgical state are also suspected to affect the corrosion resistance of carbon steel. The effect of composition appears more complicated than believed, especially the A-106 specification on the total amount of Cr+Ni+Cu+Mo+V < 1% should be studied more closely from the corrosion point of view. Laboratory tests showed that the uniform corrosion rate may be 100 times higher in galvanic contact of two dissimilar steels. The effect of galvanic contacts can neither be excluded in the process equipment corrosion cases.

  16. Protein Attachment on Nanodiamonds.

    PubMed

    Lin, Chung-Lun; Lin, Cheng-Huang; Chang, Huan-Cheng; Su, Meng-Chih

    2015-07-16

    A recent advance in nanotechnology is the scale-up production of small and nonaggregated diamond nanoparticles suitable for biological applications. Using detonation nanodiamonds (NDs) with an average diameter of ∼4 nm as the adsorbents, we have studied the static attachment of three proteins (myoglobin, bovine serum albumin, and insulin) onto the nanoparticles by optical spectroscopy, mass spectrometry, and dynamic light scattering, and electrophoretic zeta potential measurements. Results show that the protein surface coverage is predominantly determined by the competition between protein-protein and protein-ND interactions, giving each protein a unique and characteristic structural configuration in its own complex. Specifically, both myoglobin and bovine serum albumin show a Langmuir-type adsorption behavior, forming 1:1 complexes at saturation, whereas insulin folds into a tightly bound multimer before adsorption. The markedly different adsorption patterns appear to be independent of the protein concentration and are closely related to the affinity of the individual proteins for the NDs. The present study provides a fundamental understanding for the use of NDs as a platform for nanomedical drug delivery.

  17. Dissociative Electron Attachment

    NASA Astrophysics Data System (ADS)

    Arreola, Esmeralda; Esmeralda Arreola Collaboration; Leigh Hargreaves Collaboration

    Since the pioneering work of Boudiaffa et al., it has been understood that electrons, even with energies near or below the ionization threshold, are capable of initiating strand-breaks in human DNA. This discovery raised important questions for cancer treatments, since sub-ionizing electrons are known to be the most copiously produced secondary product of radiation therapy. But even to date these factors are largely excluded from dosimetry calculations. This lack of inclusion is, at least in part, certainly due to the dearth of fundamental data describing low-energy electron interactions with nucleotide molecules that form the basis of DNA. Understanding of how such slow electrons are able to damage DNA remains incomplete, but the strongly peaked nature of Boudiaffa et al.'s data gives strong hints at resonantly driven collision processes. DNA damage is therefore most likely driven by ``dissociative electron attachment'' (DEA). DEA is a rather complicated process to model due to the coupling of electronic and nuclear degrees of freedom in the molecule. At the California State University Fullerton, we are currently commissioning a new spectrometer to study dissociation channels, reaction rates and orientation effects in DEA collisions between slow electrons and nucleotide molecules. At the meeting we will present design parameters and commissioning data for this new apparatus.

  18. Bovine serum albumin-sodium alkyl sulfates bioconjugates as drug delivery systems.

    PubMed

    Benkő, M; Varga, N; Sebők, D; Bohus, G; Juhász, Á; Dékány, I

    2015-06-01

    Precipitation of bovine serum albumin (BSA) by anionic surfactants with alkyl chains of increasing lengths (octyl, decyl, dodecyl sulfates) was studied at room temperature, at pH 3.0, in isotonic sodium chloride solution. The particle size of albumin, the zeta potential, the surface charge and fluorescent properties of BSA-surfactant composites were investigated concerning addition of increasing amount of surfactant. The thermal stability of the systems was monitored by calorimetric analysis (DSC). The formation of the well-ordered structure in the self-assembly process in liquid phase was studied by XRD measurement. The structure of the precipitated BSA-surfactant nanocomposites was characterized by small-angle X-ray scattering (SAXS). Finally, ibuprofen (IBU) molecules were enclosed in BSA-surfactant bioconjugate systems and the release properties of the drug were investigated. It has been found out that, as a consequence to the increasing number of carbon atoms in the alkyl chains of the surfactant, the structure and the fluorescent properties of the aggregates formed can be controlled due to the increase in the hydrophobicity of BSA-surfactant composites. The bioconjugates are well applicable as carrier to realize controlled release of drug molecules.

  19. Self-Aggregation of Amphiphilic Dendrimer in Aqueous Solution: The Effect of Headgroup and Hydrocarbon Chain Length.

    PubMed

    Zhang, Pei; Xu, Xiaohui; Zhang, Minghui; Wang, Jinben; Bai, Guangyue; Yan, Haike

    2015-07-28

    The self-aggregation of amphiphilic dendrimers G1QPAMCm based on poly(amidoamine) PAMAM possessing the same hydrophilic group but differing in alkyl chain length in aqueous solution was investigated. Differences in the chemical structures lead to significant specificities in the aggregate building process. A variety of physicochemical parameters presented monotonous regularity with the increase in alkyl chain length in multibranched structure, as traditional amphiphilic molecules. A significant difference, however, existed in the morphology and the microenvironment of the microdomain of the aggregates, with G1QPAMCm with an alkyl chain length of 16 intending to form vesicles. To obtain supporting information about the aggregation mechanism, the thermodynamic parameters of micellization, the free Gibbs energy ΔGmic, and the entropy ΔSmic were derived subsequently, of which the relationship between the hydrophobic chain length and the thermodynamic properties indicated that the self-assembly process was jointly driven by enthalpy and entropy. Other than traditional surfactants, the contribution of enthalpy has not increased identically to the increase in hydrophobic interactions, which depends on the ratio of the alkyl chain length to the radius in the headgroup. Continuous increases in the hydrophobic chain length from 12 to 16 lead to the intracohesion of the alkyl chain involved in the process of self-assembly, weakening the hydrophobic interactions, and the increase in -ΔHmic, which offers an explanation of the formation of vesicular structures.

  20. Alkylating potential of styrene oxide: reactions and factors involved in the alkylation process.

    PubMed

    González-Pérez, Marina; Gómez-Bombarelli, Rafael; Pérez-Prior, M Teresa; Arenas-Valgañón, Jorge; García-Santos, M Pilar; Calle, Emilio; Casado, Julio

    2014-10-20

    The chemical reactivity of styrene-7,8-oxide (SO), an alkylating agent with high affinity for the guanine–N7 position and a probable carcinogen for humans, with 4-(p-nitrobenzyl)pyridine (NBP), a trap for alkylating agents with nucleophilic characteristics similar to those of DNA bases, was investigated kinetically in water/dioxane media. UV–vis spectrophotometry and ultrafast liquid chromatography were used to monitor the reactions involved. It was found that in the alkylation process four reactions occur simultaneously: (a) the formation of a β-NBP–SO adduct through an SN2 mechanism; (b) the acid-catalyzed formation of the stable α-NBP–SO adduct through an SN2′ mechanism; (c) the base-catalyzed hydrolysis of the β-adduct, and (d) the acid-catalyzed hydrolysis of SO. At 37.5 °C and pH = 7.0 (in 7:3 water/dioxane medium), the values of the respective reaction rate constants were as follows: kalkβ = (2.1 ± 0.3) × 10–4 M–1 s–1, kalkα = (1.0 ± 0.1) × 10–4 M–1 s–1, khydAD = (3.06 ± 0.09) × 10–6 s–1, and khyd = (4.2 ± 0.9) × 10–6 s–1. These values show that, in order to determine the alkylating potential of SO, none of the four reactions involved can be neglected. Temperature and pH were found to exert a strong influence on the values of some parameters that may be useful to investigate possible chemicobiological correlations (e.g., in the pH 5.81–7.69 range, the fraction of total adducts formed increased from 24% to 90% of the initial SO, whereas the adduct lifetime of the unstable β-adduct, which gives an idea of the permanence of the adduct over time, decreased from 32358 to 13313 min). A consequence of these results is that the conclusions drawn in studies addressing alkylation reactions at temperatures and/or pH far from those of biological conditions should be considered with some reserve.

  1. Molecular modeling of alkyl monolayers on the Si(100)-2 x 1 surface.

    PubMed

    Lee, Michael V; Guo, Dawei; Linford, Matthew R; Zuilhof, Han

    2004-10-12

    Molecular modeling was used to simulate various surfaces derived from the addition of 1-alkenes and 1-alkynes to Si=Si dimers on the Si(100)-2 x 1 surface. The primary aim was to better understand the interactions between adsorbates on the surface and distortions of the underlying silicon crystal due to functionalization. Random addition of ethylene and acetylene was used to determine how the addition of an adduct molecule affects subsequent additions for coverages up to one molecule per silicon dimer, that is, 100% coverage. Randomization subdues the effect that the relative positions of the adsorbates have on the enthalpy of the system. For ethylene and acetylene, the enthalpy of reaction changes less than 3 and 5 kcal/mol, respectively, from the first reacted species up to 100% coverage. As a result, a (near-)complete coverage is predicted, which is in line with experimental data. When 1-alkenes and 1-alkynes add by [2 + 2] addition, the hydrocarbon chains interact differently depending on the direction they project from the surface. These effects were investigated for four-carbon chains: 1-butene and 1-butyne. As expected, the chains that would otherwise intersect bend to avoid each other, raising the enthalpy of the system. For alkyl chains longer than four carbons, the chains are able to reorient themselves in a favorable manner, thus, resulting in a steady reduction in reaction enthalpy of about 2 kcal/mol for each additional methylene unit.

  2. Uptake of perfluorinated alkyl acids by hydroponically grown lettuce (Lactuca sativa).

    PubMed

    Felizeter, Sebastian; McLachlan, Michael S; de Voogt, Pim

    2012-11-06

    An uptake study was carried out to assess the potential human exposure to perfluorinated alkyl acids (PFAAs) through the ingestion of vegetables. Lettuce (Lactuca sativa) was grown in PFAA-spiked nutrient solutions at four different concentrations, ranging from 10 ng/L to 10 μg/L. Eleven perfluorinated carboxylic acids (PFCAs) and three perfluorinated sulfonic acids (PFSAs) were analyzed by HPLC-MS/MS. At the end of the experiment, the major part of the total mass of each of the PFAAs (except the short-chain, C4-C7, PFCAs) taken up by plants appeared to be retained in the nonedible part, viz. the roots. Root concentration factors (RCF), foliage/root concentration factors (FRCF), and transpiration stream concentration factors (TSCF) were calculated. For the long chained PFAAs, RCF values were highest, whereas FRCF were lowest. This indicates that uptake by roots is likely governed by sorption of PFAAs to lipid-rich root solids. Translocation from roots to shoots is restricted and highly depending on the hydrophobicity of the compounds. Although the TSCF show that longer-chain PFCAs (e.g., perfluorododecanoic acid) get better transferred from the nutrient solution to the foliage than shorter-chain PFCAs (e.g., perfluoroheptanoic acid), the major fraction of longer-chain PFCAs is found in roots due to additional adsorption from the spiked solution. Due to the strong electron-withdrawing effect of the fluorine atoms the role of the negative charge of the dissociated PFAAs is likely insignificant.

  3. Fluoride exposure from hydrofluoric acid in a motor gasoline alkylation unit

    SciTech Connect

    Brown, M.G.

    1985-11-01

    To assess the possible health risks associated with occupational exposure to gaseous fluoride, air and biological monitoring surveys were carried out at a motor gasoline alkylation unit within an oil refinery. Pre- and post-shift urinary fluoride measurements were obtained from 27 male operators and maintenance workers attached to the plant; personal fluoride-in-air monitoring was carried out simultaneously for 23 of these men. All readings were below NIOSH recommendations and Australia exposure standards. Significant exposure identified by changes in urine level during the shift could be demonstrated only in sub-groups of workers whose jobs involved higher routine exposures. No significant correlation between air levels and changes in urinary fluoride during the shift could be demonstrated. This survey indicates that the workers in this plant are not at risk of chronic fluorosis.

  4. Small nickel nanoparticle arrays from long chain imidazolium ionic liquids

    DOE PAGES

    Yang, Mei; Campbell, Paul S.; Santini, Catherine C.; ...

    2013-11-08

    A series of six long chain alkyl mono- and bi-cationic imidazolium based salts with bis(trifluoromethylsulfonyl)imide (NTf2–) as the anion were synthesized and characterized. Single crystal structure of 1-methyl-3-octadecylimidazolium bis(trifluoromethylsulfonyl)imide could be obtained by X-ray analysis. All these long chain alkyl imidazolium based ILs were applied in the synthesis of nickel nanoparticles via chemical decomposition of an organometallic precursor of nickel. In these media, spontaneous decomposition of Ni(COD)2 (COD = 1,5-cyclooctadiene) in the absence of H2 occurred giving small NPs (≤4 nm) with narrow size distributions. Interestingly, formation of regularly interspaced NP arrays was also observed in long chain ILs. Lastly,more » such array formation could be interesting for potential applications such as carbon nanotube growth.« less

  5. Small nickel nanoparticle arrays from long chain imidazolium ionic liquids

    SciTech Connect

    Yang, Mei; Campbell, Paul S.; Santini, Catherine C.; Mudring, Anja -Verena

    2013-11-08

    A series of six long chain alkyl mono- and bi-cationic imidazolium based salts with bis(trifluoromethylsulfonyl)imide (NTf2–) as the anion were synthesized and characterized. Single crystal structure of 1-methyl-3-octadecylimidazolium bis(trifluoromethylsulfonyl)imide could be obtained by X-ray analysis. All these long chain alkyl imidazolium based ILs were applied in the synthesis of nickel nanoparticles via chemical decomposition of an organometallic precursor of nickel. In these media, spontaneous decomposition of Ni(COD)2 (COD = 1,5-cyclooctadiene) in the absence of H2 occurred giving small NPs (≤4 nm) with narrow size distributions. Interestingly, formation of regularly interspaced NP arrays was also observed in long chain ILs. Lastly, such array formation could be interesting for potential applications such as carbon nanotube growth.

  6. Allylamine-mediated DNA attachment to polycrystalline diamond surface

    NASA Astrophysics Data System (ADS)

    Zhuang, H.; Srikanth, Vadali. V. S. S.; Jiang, X.; Luo, J.; Ihmels, H.; Aronov, I.; Wenclawiak, B. W.; Adlung, M.; Wickleder, C.

    2009-10-01

    Allylamine, an unsaturated short carbon chain amine was used to mediate ss-DNA attachment to an H-terminated polycrystalline diamond thin film surface for biosensoric applications. At first, allylamine was photochemically tethered onto the diamond film surface; ss-DNA was then attached via the allylamine linkage. The DNA molecules are then hybridized with the complementary DNA molecules containing fluorescence labels followed by denaturing. Time-of-fight secondary ion mass spectrometry and fluorescence spectroscopy are used to confirm the allylamine bonding and the covalent DNA bonding to the diamond film surface, respectively.

  7. Antihydrophobic cosolvent effects for alkylation reactions in water solution, particularly oxygen versus carbon alkylations of phenoxide ions.

    PubMed

    Breslow, Ronald; Groves, Kevin; Mayer, M Uljana

    2002-04-10

    Antihydrophobic cosolvents such as ethanol increase the solubility of hydrophobic molecules in water, and they also affect the rates of reactions involving hydrophobic surfaces. In simple reactions of hydrocarbons, such as the Diels-Alder dimerization of 1,3-cyclopentadiene, the rate and solubility data directly reflect the geometry of the transition state, in which some hydrophobic surface becomes hidden. In reactions involving polar groups, such as alkylations of phenoxide ions or S(N)1 ionizations of alkyl halides, cosolvents in water can have other effects as well. However, solvation of hydrophobic surfaces is still important. By the use of structure-reactivity relationships, and comparing the effects of ethanol and DMSO as solvents, it has been possible to sort out these effects. The conclusions are reinforced by an ab initio computer model for hydrophobic solvation. The result is a sensible transition state for phenoxide ion as a nucleophile, using its oxygen n electrons to avoid loss of conjugation. The geometry of alkylation of aniline is very different, involving packing (stacking) of the aniline ring onto the phenyl ring of a benzyl group in the benzylation reaction. The alkylation of phenoxide ions by benzylic chlorides can occur both at the phenoxide oxygen and on ortho and para positions of the ring. Carbon alkylation occurs in water, but not in nonpolar organic solvents, and it is observed only when the phenoxide has at least one methyl substituent ortho, meta, or para. The effects of phenol substituents and of antihydrophobic cosolvents on the rates of the competing alkylation processes indicate that in water the carbon alkylation involves a transition state with hydrophobic packing of the benzyl group onto the phenol ring. The results also support our conclusion that oxygen alkylation uses the n electrons of the phenoxide oxygen as the nucleophile and does not have hydrophobic overlap in the transition state. The mechanisms and explanations for

  8. Succinimide complexes of borated alkyl catechols and lubricating oil compositions containing same

    SciTech Connect

    Liston, T.V.

    1986-12-16

    A composition is described comprising a complex prepared by reacting a borated alkyl catechol and an oil soluble alkyl or alkenyl succinimide wherein the weight percent ratio of the alkyl or alkenyl succinimide to the borated alkyl catechol ranges from 3:1 to 16:1.

  9. Alkaline phosphatase revisited: hydrolysis of alkyl phosphates.

    PubMed

    O'Brien, Patrick J; Herschlag, Daniel

    2002-03-05

    Escherichia coli alkaline phosphatase (AP) is the prototypical two metal ion catalyst with two divalent zinc ions bound approximately 4 A apart in the active site. Studies spanning half a century have elucidated many structural and mechanistic features of this enzyme, rendering it an attractive model for investigating the potent catalytic power of bimetallic centers. Unfortunately, fundamental mechanistic features have been obscured by limitations with the standard assays. These assays generate concentrations of inorganic phosphate (P(i)) in excess of its inhibition constant (K(i) approximately 1 muM). This tight binding by P(i) has affected the majority of published kinetic constants. Furthermore, binding limits k(cat)/K(m) for reaction of p-nitrophenyl phosphate, the most commonly employed substrate. We describe a sensitive (32)P-based assay for hydrolysis of alkyl phosphates that avoids the complication of product inhibition. We have revisited basic mechanistic features of AP with these alkyl phosphate substrates. The results suggest that the chemical step for phosphorylation of the enzyme limits k(cat)/K(m). The pH-rate profile and additional results suggest that the serine nucleophile is active in its anionic form and has a pK(a) of < or = 5.5 in the free enzyme. An inactivating pK(a) of 8.0 is observed for binding of both substrates and inhibitors, and we suggest that this corresponds to ionization of a zinc-coordinated water molecule. Counter to previous suggestions, inorganic phosphate dianion appears to bind to the highly charged AP active site at least as strongly as the trianion. The dependence of k(cat)/K(m) on the pK(a) of the leaving group follows a Brønsted correlation with a slope of beta(lg) = -0.85 +/- 0.1, differing substantially from the previously reported value of -0.2 obtained from data with a less sensitive assay. This steep leaving group dependence is consistent with a largely dissociative transition state for AP-catalyzed hydrolysis of

  10. Slow-onset, long-duration, alkyl analogues of methylphenidate with enhanced selectivity for the dopamine transporter.

    PubMed

    Froimowitz, Mark; Gu, Yonghong; Dakin, Les A; Nagafuji, Pamela M; Kelley, Charles J; Parrish, Damon; Deschamps, Jeffrey R; Janowsky, Aaron

    2007-01-25

    Methylphenidate analogues, in which the carbomethoxy has been replaced by an alkyl group and with different phenyl substituents, have been synthesized and tested in monoamine transporter assays. As predicted from a pharmacophore model, most of the RR/SS diastereomers showed high potency as dopamine reuptake inhibitors. Analogues with a 4-chlorophenyl group and an unbranched initial alkyl atom had consistently enhanced selectivity for the dopamine transporter. The most potent compounds were those with a three- or four-carbon chain. The "inactive" RS/SR diastereomers showed substantial activity when the phenyl substituent was 3,4-dichloro. On a locomotor assay, one compound was found to have a slow onset and a long duration of action. The activity of these compounds provides additional evidence for a conformational/superposition model of methylphenidate with cocaine-like structures. A ketone analogue, obtained by hydrogenating a previously described vinylogous amide, had activity similar to that of methylphenidate.

  11. Hot melt adhesive attachment pad

    NASA Technical Reports Server (NTRS)

    Fox, R. L.; Frizzill, A. W.; Little, B. D.; Progar, D. J.; Coultrip, R. H.; Couch, R. H.; Gleason, J. R.; Stein, B. A.; Buckley, J. D.; St.clair, T. L. (Inventor)

    1984-01-01

    A hot melt adhesive attachment pad for releasably securing distinct elements together is described which is particularly useful in the construction industry or a spatial vacuum environment. The attachment pad consists primarily of a cloth selectively impregnated with a charge of hot melt adhesive, a thermo-foil heater, and a thermo-cooler. These components are securely mounted in a mounting assembly. In operation, the operator activates the heating cycle transforming the hot melt adhesive to a substantially liquid state, positions the pad against the attachment surface, and activates the cooling cycle solidifying the adhesive and forming a strong, releasable bond.

  12. Safety assessment of alkyl benzoates as used in cosmetics.

    PubMed

    'Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2012-01-01

    The functions of alkyl benzoates in cosmetics include fragrance ingredients, skin-conditioning agents--emollient, skin-conditioning agents--miscellaneous, preservatives, solvents, and plasticizers. The Cosmetic Ingredient Review Expert Panel reviewed the relevant animal and human data and noted gaps in the available safety data for some of the alkyl benzoates. Similar structure activity relationships, biologic functions, and cosmetic product usage allowed the available data of many of the alkyl benzoates to be extended to the entire group. Carcinogenicity data were not available, but available data indicated that these alkyl benzoate cosmetic ingredients are not genotoxic. Also benzoic acid and tested component alcohols were not reproductive or developmental toxicants, are not genotoxic in almost all assays, and are not carcinogenic. These ingredients were determined to be safe in the present practices of use and concentration.

  13. Fluorinated Alkyl Ether Epoxy Resin Compositions and Applications Thereof

    NASA Technical Reports Server (NTRS)

    Wohl, Christopher J. (Inventor); Connell, John W. (Inventor); Smith, Joseph G. (Inventor); Siochi, Emilie J. (Inventor); Gardner, John M. (Inventor); Palmieri, Frank M. (Inventor)

    2017-01-01

    Epoxy resin compositions prepared using amino terminated fluoro alkyl ethers. The epoxy resin compositions exhibit low surface adhesion properties making them useful as coatings, paints, moldings, adhesives, and fiber reinforced composites.

  14. Regeneration of a deactivated USY alkylation catalyst using supercritical isobutane

    SciTech Connect

    Daniel M. Ginosar; David N. Ghompson; Kyle C. Burch

    2005-01-01

    Off-line, in-situ alkylation activity recovery from a completely deactivated solid acid catalyst was examined in a continuous-flow reaction system employing supercritical isobutane. A USY zeolite catalyst was initially deactivated during the liquid phase alkylation of butene with isobutane in a single-pass reactor and then varying amounts of alkylation activity were recovered by passing supercritical isobutane over the catalyst bed at different reactivation conditions. Temperature, pressure and regeneration time were found to play important roles in the supercritical isobutane regeneration process when applied to a completely deactivated USY zeolite alkylation catalyst. Manipulation of the variables that influence solvent strength, diffusivity, surface desorption, hydride transfer rates, and coke aging, strongly influence regeneration effectiveness.

  15. Perfluorinated Alkyl Compounds: Challenges To Develop Robust And Reliable Methods

    EPA Science Inventory

    An increasing number of studies have been conducted to investigate the environmental distribution of perfluorinated alkyl compounds (PFCs), some of which are known to be toxic in laboratory studies. Despite growing public concerns, environmental monitoring data are still limited...

  16. Investigations on the metabolism of alkyl polyglucosides and their determination in waste water by means of liquid chromatography-electrospray mass spectrometry.

    PubMed

    Eichhorn, P; Knepper, T P

    1999-08-27

    Alkyl polyglucosides (APGs) were analyzed by reversed-phase liquid chromatography coupled to mass spectrometry with electrospray ionization. Analytes were separated according to the chain length of the alkyl homologues, whereas the separation of isomeric forms of the glucose moiety was achieved partially. Depending on the structure of the glucose ring the alkyl monoglucosides show a distinct affinity in terms of the formation of sodium and ammonium adduct ions. Metabolism of isomer pure alkyl monoglucosides was studied on a testfilter device to gather information about the degradation behavior and to obtain eventually poorly degradable metabolites. In spite of unsuccessful detection of any metabolites such as "polyglucoside alcanoic acids", a degradation pathway was proposed including the cleavage of the glucosidic bond as initial step. In addition, a method for the determination of APGs in municipal waste water effluent was developed using solid-phase extraction on reversed-phase material. Recovery rates were in the range of 66 to 98% for three spiked alkyl monoglucosides and a quantitation limit of 0.2 microg l(-1) was achieved.

  17. Alkylation Induced DNA Repair and Mutagenesis in Escherichia coli.

    DTIC Science & Technology

    1987-11-23

    III (Gates and inn, 1977), Micrococcus luteus UV endo- nuclease (Grossman et al, 1978) and bacteriophage T UV endonuclease (Warner et al, 1980) have DNA...34, Garland Publishing, Inc. New York & London USA. Ather, A., Z. Ahmed and S. Riazxxddin, 1984. Adaptive response of Micrococcus luteus to alkylating...Laval, J., 3. Pierre and F. Laval. 1981. Release of 7-nmthylguanine residues frain alkylated ENA by extracts of Micrococcus luteus and Escherichia

  18. Copper-catalyzed arylation of alkyl halides with arylaluminum reagents

    PubMed Central

    Shrestha, Bijay

    2015-01-01

    Summary We report a Cu-catalyzed coupling between triarylaluminum reagents and alkyl halides to form arylalkanes. The reaction proceeds in the presence of N,N,N’,N’-tetramethyl-o-phenylenediamine (NN-1) as a ligand in combination with CuI as a catalyst. This catalyst system enables the coupling of primary alkyl iodides and bromides with electron-neutral and electron-rich triarylaluminum reagents and affords the cross-coupled products in good to excellent yields. PMID:26734088

  19. Chemoselective Alkylations with N- and C-Metalated Nitriles.

    PubMed

    Yang, Xun; Nath, Dinesh; Fleming, Fraser F

    2015-10-02

    Metalated nitriles exhibit complementary chemoselectivities in electrophilic alkylations. N-Lithiated or C-magnesiated nitriles can be prepared from the same nitrile precursor and selectively reacted with a 1:1 mixture of methyl cyanoformate and benzyl bromide or bifunctional electrophiles through chemoselective attack onto either an alkyl halide or a carbonyl electrophile. A mechanistic explanation for the chemoselectivity preferences is provided that rests on the structural and complexation differences between N- and C-metalated nitriles.

  20. Adult attachment and declining birthrates.

    PubMed

    Draper, Thomas W; Holman, Thomas B; White, Whitney; Grandy, Shannon

    2007-02-01

    Attachment scores for 658 young adults living in the U.S.A. were obtained using the Experiences in Close Relationships scale. The participants came from a subsample of the RELATE data set, who had also filled out the adult attachment measure. Those young adults living in Utah County, Utah, an area of the country with a higher than normal birthrate (88% members of the Church of Jesus Christ of Latter-day Saints), also had higher than average adult attachment scores. While the methodology was not sufficient to assess causal direction nor eliminate the possibility of unidentified influences, an undiscussed psychological factor, adult attachment, may play a role in the numerical declines observed among nonimmigrant communities in the USA and Europe.

  1. Social attachments and traumatic stress

    PubMed Central

    Bryant, Richard A.

    2016-01-01

    The extent to which we engage with our social world has been central to our survival as a species and, accordingly, is relevant to how we cope with trauma and adversity. This review summarises current knowledge about the importance of social connections from an evolutionary perspective, as well as integrating this with a discussion of prevailing attachment theories. Experimental research supporting the potential benefit of attachments for managing adversity are presented, along with a review of how these benefits are moderated by individual differences in attachment style. The potential impact of trauma on attachment systems, and the manner in which this can compound trauma stress is discussed. Finally, a broader overview of social network analysis is introduced and it is proposed that a more sociocentric framework of trauma response would promote a fuller understanding of how social processes moderate trauma response. PMID:26996531

  2. Final Technical Report [Development of Catalytic Alkylation and Fluoroalkylation Methods

    SciTech Connect

    Vicic, David A.

    2014-05-01

    In the early stages of this DOE-funded research project, we sought to prepare and study a well-defined nickel-alkyl complex containing tridentate nitrogen donor ligands. We found that reaction of (TMEDA)NiMe2 (1) with terpyridine ligand cleanly led to the formation of (terpyridyl)NiMe (2), which we also determined to be an active alkylation catalyst. The thermal stability of 2 was unlike that seen for any of the active pybox ligands, and enabled a number of key studies on alkyl transfer reactions to be performed, providing new insights into the mechanism of nickel-mediated alkyl-alkyl cross-coupling reactions. In addition to the mechanistic studies, we showed that the terpyridyl nickel compounds can catalytically cross-couple alkyl iodides in yields up to 98% and bromides in yields up to 46 %. The yields for the bromides can be increased up to 67 % when the new palladium catalyst [(tpy’)Pd-Ph]I is used. The best route to the targeted [(tpy)NiBr] (1) was found to involve the comproportionation reaction of [(dme)NiBr{sub 2}] and [Ni(COD){sub 2}] in the presence of two equivalents of terpyridine. This reaction was driven to high yields of product formation (72 % isolated) by the precipitation of 1 from THF solvent.

  3. Regioselective 1-N-Alkylation and Rearrangement of Adenosine Derivatives.

    PubMed

    Oslovsky, Vladimir E; Drenichev, Mikhail S; Mikhailov, Sergey N

    2015-01-01

    Several methods for the preparation of some N(6)-substituted adenosines based on selective 1-N-alkylation with subsequent Dimroth rearrangement were developed. The proposed methods seem to be effective for the preparation of natural N(6)-isopentenyl- and N(6)-benzyladenosines, which are known to possess pronounced biological activities. Direct 1-N-alkylation of 2',3',5'-tri-O-acetyladenosine and 3',5'-di-O-acetyl-2'-deoxyadenosine with alkyl halides in N,N-dimethylformamide (DMF) in the presence of BaCO3 and KI gave 1-N-substituted derivatives with quantitative yields, whereas 1-N-alkylation of adenosine was accompanied by significant O-alkylation. Moreover, the reaction of trimethylsilyl derivatives of N(6)-acetyl-2',3',5'-tri-O-acetyladenosine and N(6)-acetyl-3',5'-di-O-acetyl-2'-deoxyadenosine with alkyl halides leads to the formation of the stable 1-N-substituted adenosines. Dimroth rearrangement of 1-N-substituted adenosines in aqueous ammonia yields pure N(6)-substituted adenosines.

  4. Benefits of the stirred, autorefrigerated reactor in sulfuric acid alkylation

    SciTech Connect

    Ackerman, S.; Lerner, H.; Zaczepinski, S.

    1996-12-01

    Alkylation is a process which combines propylenes, butylenes, and pentylenes with isobutane in the presence of an acid catalyst (H{sub 2}SO{sub 4} or HF) to produce a premium quality gasoline blendstock. The alkylation process was developed in the late 1930`s and processing capacity grew tremendously during World War II in response to demand for aviation gasoline. Since that time, alkylation capacity has steadily grown to supply an important motor gasoline component. Now, more than 50 years later, alkylation is in the spotlight again for reformulated gasoline. Alkylate is a high octane, low sensitivity, low RVP, totally paraffinic material which represents the ideal blendstock for modern gasoline manufacture. Two types of modern reactor systems are currently offered for license to the refining industry for sulfuric acid alkylation. These are the stirred, autorefrigerated system offered by Exxon Research and Engineering (ERE) and the indirect, or effluent refrigerated system offered by others. By means of a case study example, this paper discusses the autorefrigerated reaction system and its benefits.

  5. Alcohols as alkylating agents in heteroarene C–H functionalization

    PubMed Central

    Jin, Jian; MacMillan, David W. C.

    2015-01-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage1. One of the core principles that underlies DNA biosynthesis is the radical-mediated elimnation of H2O to deoxygenate ribonucleotides, an example of ‘spin-center shift’ (SCS)2, during which an alcohol C–O bond is cleaved, resulting in a carbon-centered radical intermediate. While SCS is a well-understood biochemical process, it is underutilized by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylations using alcohols as radical precursors. Considering traditional radical-based alkylation methods require the use of stoichiometric oxidants, elevated temperatures, or peroxides3–7, the development of a mild protocol using simple and abundant alkylating agents would have significant utility in the synthesis of diversely functionalized pharmacophores. In this manuscript, we describe the successful execution of this idea via the development of a dual catalytic alkylation of heteroarenes using alcohols as mild alkylating reagents. This method represents the first broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer (HAT) catalysis. The utility of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone. PMID:26308895

  6. Alcohols as alkylating agents in heteroarene C-H functionalization

    NASA Astrophysics Data System (ADS)

    Jin, Jian; MacMillan, David W. C.

    2015-09-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage. One of the core principles underlying DNA biosynthesis is the radical-mediated elimination of H2O to deoxygenate ribonucleotides, an example of `spin-centre shift', during which an alcohol C-O bond is cleaved, resulting in a carbon-centred radical intermediate. Although spin-centre shift is a well-understood biochemical process, it is underused by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylation reactions using alcohols as radical precursors. Because conventional radical-based alkylation methods require the use of stoichiometric oxidants, increased temperatures or peroxides, a mild protocol using simple and abundant alkylating agents would have considerable use in the synthesis of diversely functionalized pharmacophores. Here we describe the development of a dual catalytic alkylation of heteroarenes, using alcohols as mild alkylating reagents. This method represents the first, to our knowledge, broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer catalysis. The value of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone.

  7. Liquid structure of 1-alkyl-3-methylimidazolium-hexafluorophosphates by wide angle x-ray and neutron scattering and molecular dynamics

    NASA Astrophysics Data System (ADS)

    Macchiagodena, Marina; Gontrani, Lorenzo; Ramondo, Fabio; Triolo, Alessandro; Caminiti, Ruggero

    2011-03-01

    We report for the first time joined energy dispersed x-ray and neutron diffraction experiments on a series of (both protiated and selectively deuteriated) 1-alkyl-3-methylimidazolium hexafluorophosphate salts (alkyl = butyl, hexyl, octyl) at ambient conditions. The x-ray experimental data are used to optimize the interaction potential used for running molecular dynamics simulations on these systems. Such a potential leads to a good description of neutron scattering data from the samples without additional refinement, thus further validating the potential definition. The molecular dynamics simulations were used to access microscopic information on the morphology of the proposed systems, thus probing the role played by alkyl chain length on the structure. The comparison of x-ray weighted and neutron-weighted computed diffraction patterns allows the rationalization of several diffraction features. Further insight into cation-anion coordination and alkyl chain conformational equilibrium is provided on the basis of the MD-derived snapshots, confirming and extending previously obtained results on these issues.

  8. Biophysical Characterization of the Strong Stabilization of the RNA Triplex poly(U)•poly(A)*poly(U) by 9-O-(ω-amino) Alkyl Ether Berberine Analogs

    PubMed Central

    Hossain, Maidul; Haq, Lucy; Suresh Kumar, Gopinatha

    2012-01-01

    Background Binding of two 9-O-(ω-amino) alkyl ether berberine analogs BC1 and BC2 to the RNA triplex poly(U)•poly(A)*poly(U) was studied by various biophysical techniques. Methodology/Principal Findings Berberine analogs bind to the RNA triplex non-cooperatively. The affinity of binding was remarkably high by about 5 and 15 times, respectively, for BC1 and BC2 compared to berberine. The site size for the binding was around 4.3 for all. Based on ferrocyanide quenching, fluorescence polarization, quantum yield values and viscosity results a strong intercalative binding of BC1 and BC2 to the RNA triplex has been demonstrated. BC1 and BC2 stabilized the Hoogsteen base paired third strand by about 18.1 and 20.5°C compared to a 17.5°C stabilization by berberine. The binding was entropy driven compared to the enthalpy driven binding of berbeine, most likely due to additional contacts within the grooves of the triplex and disruption of the water structure by the alkyl side chain. Conclusions/Significance Remarkably higher binding affinity and stabilization effect of the RNA triplex by the amino alkyl berberine analogs was achieved compared to berberine. The length of the alkyl side chain influence in the triplex stabilization phenomena. PMID:22666416

  9. Helsingør statement on poly- and perfluorinated alkyl substances (PFASs).

    PubMed

    Scheringer, Martin; Trier, Xenia; Cousins, Ian T; de Voogt, Pim; Fletcher, Tony; Wang, Zhanyun; Webster, Thomas F

    2014-11-01

    In this discussion paper, the transition from long-chain poly- and perfluorinated alkyl substances (PFASs) to fluorinated alternatives is addressed. Long-chain PFASs include perfluoroalkyl carboxylic acids (PFCAs) with 7 or more perfluorinated carbons, perfluoroalkyl sulfonic acids (PFSAs) with 6 or more perfluorinated carbons, and their precursors. Because long-chain PFASs have been found to be persistent, bioaccumulative and toxic, they are being replaced by a wide range of fluorinated alternatives. We summarize key concerns about the potential impacts of fluorinated alternatives on human health and the environment in order to provide concise information for different stakeholders and the public. These concerns include, amongst others, the likelihood of fluorinated alternatives or their transformation products becoming ubiquitously present in the global environment; the need for more information on uses, properties and effects of fluorinated alternatives; the formation of persistent terminal transformation products including PFCAs and PFSAs; increasing environmental and human exposure and potential of adverse effects as a consequence of the high ultimate persistence and increasing usage of fluorinated alternatives; the high societal costs that would be caused if the uses, environmental fate, and adverse effects of fluorinated alternatives had to be investigated by publicly funded research; and the lack of consideration of non-persistent alternatives to long-chain PFASs.

  10. Polymerization of Conducting Polymers Confined to Free Surfaces: A comparison of the Langmuir-Blodgett Polymerization of 3-Alkyl Pyrroles and 2- Alkyl Anilines

    DTIC Science & Technology

    1992-05-19

    Confined to Free Surfaces: A Comparison of the Langmuir-Blodgett Polymerization of 3- Alkyl Pyrroles and 2- Alkyl Anilines Submitted for Publication in...Surfaces: A Comparison of the Langmuir Blodgett Polymerizations of 3- alkyl pyrroles and 2- alkyl anilines R. S. Duran and H.C. Zhou Dept. of Chemistry...polymerization reactions in more detail and compare them. To do this, the polymerization reactions were run under two conditions. In the first case

  11. Combustion Pathways of the Alkylated Heteroaromatics: Bond Dissociation Enthalpies and Alkyl Group Fragmentations

    NASA Astrophysics Data System (ADS)

    Hayes, Carrigan J.; Hadad, Christopher M.

    2009-04-01

    The bond dissociation enthalpies (BDEs) of the alkyl groups of the alkyl-substituted heterocycles have been studied and compiled using DFT methodology, with the intent of modeling the larger heterocyclic functionalities found in coal. DFT results were calibrated against CBS-QB3 calculations, and qualitative trends were reproduced between these methods. Loss of hydrogen at the benzylic position provided the most favorable route to radical formation, for both the azabenzenes and five-membered heterocycles. The ethyl derivatives had lower BDE values than the methyl derivatives due to increased stabilization of the corresponding radicals. Calculated spin densities correlated well with bond dissociation enthalpies for these compounds, while geometric effects were minimal with respect to the heterocycles themselves. Temperature effects on the bond dissociation enthalpies were minor, ranging by about 5 kcal/mol from 298 to 2000 K; the free energies of reaction dropped significantly over the same range due to entropic effects. Monocyclic heteroaromatic rings were seen to replicate the chemistry of multicyclic heteroaromatic systems.

  12. Attachment style and its relationship to working alliance in the supervision of British clinical psychology trainees.

    PubMed

    Dickson, Joanne M; Moberly, Nicholas J; Marshall, Yehuda; Reilly, James

    2011-01-01

    Although the supervisory relationship is thought to be critical in training clinical psychologists, little is known about factors affecting the supervisory alliance. We conducted an Internet survey of British clinical doctoral trainees (N = 259) in which participants rated their supervisory working alliance, parental style during childhood, pathological adult attachment behaviours and attachment style for themselves and their supervisors. Trainees' ratings of the working alliance were associated with perceptions of supervisors' attachment style, but not with perceptions of trainees' own attachment styles. Path analysis supported a causal chain linking parental indifference, compulsive self-reliance, insecure supervisor attachment style and lower ratings of the working alliance. Our results broadly replicate data from a US sample and suggest that attachment theory is helpful in understanding clinical supervisory processes.

  13. Early Transition Metal Alkyl and Tetrahydroborate Complexes.

    NASA Astrophysics Data System (ADS)

    Jensen, James Allen

    1988-06-01

    An investigation of early transition metal alkyl and tetrahydroborate complexes as catalytic models and ceramic precursors has been initiated. The compounds MX _2 (dmpe)_2, dmpe = 1,2-bis(dimethylphosphino)ethane, for M = Ti, V, Cr, and X = Br, I, BH_4, have been prepared. These complexes are paramagnetic and have been shown by X-ray crystallography to have trans-octahedral structures. The BH_4^{-} groups in Ti(BH_4)_2(dmpe) _2 bond to the metal in a bidentate manner. This structure is in marked contrast to the structure of the vanadium analogue, V(BH_4)_2 (dmpe)_2, which displays two unidentate BH_4^{-} groups. Alkylation of Ti(BH_4)_2 (dmpe)_2 with LiMe results in the complex TiMe_2(dmpe) _2 which is diamagnetic in both solution and solid state. Single crystal X-ray and neutron diffraction studies show that there may be strong Ti-C pi -bonding. A tetragonal compression along the C -Ti-C bond vector accounts for the observed diamegnetism. A series of complexes of the formula Ti(BH _4)_3(PR_3)_2 has been prepared where PR_3 = PMe_3, PEt_3, PMe_3Ph, and P(OMe)_3 . The X-ray crystal structure of Ti(BH _4)_3(PMe_3)_2 reveals a pseudo trigonal bipyramidal geometry in which two BH_4^{-} groups display an unusual "side-on" bonding mode. The "side-on" ligation mode has been attributed to a Jahn-Teller distortion of the orbitally degenerate d^1 ground state. In contrast, the non-Jahn-Teller susceptible vanadium analogue, V(BH_4)_3 (PMe_3)_2, possesses a nearly ideal D_{rm 3h} >=ometry with three bidentate tetrahydroborate groups. Addition of excess PMe_3 to V(BH_4)_3(PMe _3)_2<=ads to the vanadium(II) hydride -bridged dimer (V(H)(BH_4)(PMe _3)_2]_2, while addition of PMe_3 and water forms the vanadium(III) oxo dimer (V(BH_4)_2 (PMe_3)_2]_2 [mu-O) which has been structurally characterized. The compound Ti(CH_2CMe _3)_4 can be prepared by addition of Ti(OEt)_4 to LiCH_2 CMe_3. Sublimation of Ti(CH _2CMe_3)_4 over a substrate heated to 250^ circC results in the chemical vapor

  14. Herbicidal action of 2-hydroxy-3-alkyl-1,4-naphthoquinones.

    PubMed

    Jewess, Philip J; Higgins, James; Berry, Kate J; Moss, Stephen R; Boogaard, Adrian B; Khambay, Bhupinder P S

    2002-03-01

    The main mode of herbicidal activity of 2-hydroxy-3-alkyl-1,4-naphthoquinones is shown to be inhibition of photosystem II (PSII). The herbicidal and in vitro activities have been measured and correlated with their (Log)octanol/water partition coefficients (Log Ko/w). The length of the 3-n-alkyl substituent for optimal activity differed between herbicidal and in vitro activity. The maximum in vitro activity was given by the nonyl to dodecyl homologues (Log Ko/w between 6.54 and 8.12), whereas herbicidal activity peaked with the n-hexyl compound (Log Ko/w = 4.95). The effect of chain branching was also investigated using isomeric pentyl analogues substituted at position 3. All exhibited similar levels of in vitro activities but herbicidal activities differed, albeit moderately, with the exception of one analogue that was much less phytotoxic. Other modes of action were also investigated using two representative compounds. They did not show any activity on photosystem I or mitochondrial complex I, or generate toxic oxygen radicals by redox cycling reactions. Only moderate activity was found against mitochondrial complex III from plants, in contrast to much higher corresponding activity using an insect enzyme.

  15. Virucidal effects of bleach activators, sodium alkyl acyloxybenzene sulfonate and acyloxybenzoic acid, against Feline calicivirus.

    PubMed

    Tobe, Seiichi; Hoshi, Marika; Iizuka, Kinue; Tadenuma, Hirohiko; Takaoka, Hiromitsu; Komoriya, Tomoe; Kohno, Hideki

    2012-01-01

    Noroviruses (NVs) are major causative pathogens of gastroenteritis. The disinfection of contaminated clothing during common household washing is desirable. The virucidal effects of 2 bleach activators, sodium alkyl acyloxybenzene sulfonate (OBS) and alkyl acyloxybenzoic acid (OBC), were studied using Feline calicivirus (FCV) as a surrogate for NVs. FCV was added to solutions containing either OBS or OBC and sodium percarbonate at various temperatures and for varying lengths of time. OBS and OBC, which generate long carbon chain peroxy acids, enhanced the virucidal effect of sodium percarbonate (PC). In particular, sodium lauroyloxybenzene sulfonate (OBS-12) and decanoyloxybenzoic acid (OBC-10) showed superior virucidal effects. Although the virucidal effect of 38-200 mg/L OBS-12 was maintained with 2-5% (v/v) horse serum, there was less of an effect with the same concentration of available chlorine. OBS and OBC have been used as ingredients in some laundry products to increase bleaching activity. It is expected that the use of OBS and OBC is also effective for the inactivation of NVs under common household washing conditions.

  16. Helical Poly(5-alkyl-2,3-thiophene)s: Controlled Synthesis and Structure Characterization

    SciTech Connect

    Zhang, Hong-Hai; Ma, Chuanxu; Bonnesen, Peter V.; Zhu, Jiahua; Sumpter, Bobby G.; Carrillo, Jan-Michael Y.; Yin, Panchao; Wang, Yangyang; Li, An-Ping; Hong, Kunlun

    2016-07-12

    Whereas Poly(3-alkyl-2,5-thiophene)s (P3AT), with many potential applications, have been extensively investigated, their ortho-connected isomers, poly(5-alkyl-2,3-thiophene)s (P5AT), have never been reported because of the difficulty in their syntheses. We herein present the first synthesis of regioregular P5AT via controlled Suzuki cross-coupling polymerization with PEPPSI-IPr as catalyst, affording the polymers with tunable molecular weight, narrow polydispersity (PDI) and well-defined functional end groups at the gram scale. The helical geometry of P5AT was studied by a combination of NMR, small angle x-ray scattering (SAXS) and scanning tunneling microscopy (STM). Particularly, the single polymer chain of poly(5- 2 butyl-2,3-thiophene) (P5BT) on highly oriented pyrolytic graphite (HOPG) substrates with either M or P helical conformation was directly observed by STM. The comparison of UV-vis absorption between poly(5-hexyl-2,3-thiophene) (P5HT) (λ = 345 nm) and poly(3-hexyl-2,5- thiophene) (P3HT) (λ = 450 nm) indicated that the degree of conjugation of the backbone in P5HT is less than in P3HT, which may be a consequence of the helical geometry of the former compared to the more planar geometry of the latter. Moreover, we found that P5HT can emit green fluorescence under UV (λ = 360 nm) irradiation

  17. Helical Poly(5-alkyl-2,3-thiophene)s: Controlled Synthesis and Structure Characterization

    DOE PAGES

    Zhang, Hong-Hai; Ma, Chuanxu; Bonnesen, Peter V.; ...

    2016-07-12

    Whereas Poly(3-alkyl-2,5-thiophene)s (P3AT), with many potential applications, have been extensively investigated, their ortho-connected isomers, poly(5-alkyl-2,3-thiophene)s (P5AT), have never been reported because of the difficulty in their syntheses. We herein present the first synthesis of regioregular P5AT via controlled Suzuki cross-coupling polymerization with PEPPSI-IPr as catalyst, affording the polymers with tunable molecular weight, narrow polydispersity (PDI) and well-defined functional end groups at the gram scale. The helical geometry of P5AT was studied by a combination of NMR, small angle x-ray scattering (SAXS) and scanning tunneling microscopy (STM). Particularly, the single polymer chain of poly(5- 2 butyl-2,3-thiophene) (P5BT) on highly oriented pyrolyticmore » graphite (HOPG) substrates with either M or P helical conformation was directly observed by STM. The comparison of UV-vis absorption between poly(5-hexyl-2,3-thiophene) (P5HT) (λ = 345 nm) and poly(3-hexyl-2,5- thiophene) (P3HT) (λ = 450 nm) indicated that the degree of conjugation of the backbone in P5HT is less than in P3HT, which may be a consequence of the helical geometry of the former compared to the more planar geometry of the latter. Moreover, we found that P5HT can emit green fluorescence under UV (λ = 360 nm) irradiation« less

  18. Nanoseeding via dual surface modification of alkyl monolayer for site-controlled electroless metallization.

    PubMed

    Chen, Sung-Te; Chen, Giin-Shan

    2011-10-04

    In this work, an attempt to fabricate nanostructured metallization patterns on SiO(2) dielectric layers is made by using plasma-patterned self-assembled monolayers (SAMs), in conjunction with a novel aqueous seeding and electroless process. Taking octadecyltrichlorosilane (OTS) as a test material, the authors demonstrate that optimizing the N(2)-H(2) plasma conditions leads to the successive conversion of the topmost aliphatic chains of alkyl SAMs to carboxyl (COOH) and hydroxyl (C-OH) functional groups, which was previously found in alkyl SAMs only by exposure to "oxygen-based" plasma. Further modifying the plasma-exposed (either COOH or C-OH terminated) regions with an aqueous solution (SC-1) creates surface functionalities that are viable for site-controlled metallic seeding (e.g., Co or Ni) with an adsorption selectivity of greater than 1000:1. Neither the combination of costly PdCl(2) and complex additives nor the demerits of the associated aqueous chemistry (e.g., seed agglomeration and seed sparseness) are involved. Therefore, the seed particles are only 3 nm in size. Simultaneously, there are sufficient particle densities previously unattainable for electroless deposition to trigger highly resolved Cu metallization patterns with a film thickness of less than 10 nm. The formation of the seed-adsorbing sites is discussed, based on a plasma-dissociated, water-mediated chemical oxidation route.

  19. Washing of field weathered crude oil contaminated soil with an environmentally compatible surfactant, alkyl polyglucoside.

    PubMed

    Han, Mei; Ji, Guodong; Ni, Jinren

    2009-07-01

    Weathered crude oil contaminated soils (COCSs), which are much more difficult to remediate than those freshly contaminated, are widespread especially at the sites of oil fields and industries. Surfactant enhanced ex situ soil washing could be used to remediate COCSs, but surfactant toxicity becomes one of the major concerns. In this study, a class of green surfactants, alkyl polyglucosides (APGs), were tested in washing the field weathered COCS with relatively high oil concentration (123 mgg(-1) dry soil) from Jilin Oilfield, Northeastern China. APG1214, characterized with longer alkyl chain, was more effective than APG0810 in crude oil removal. Adding inorganic sodium salts into APG1214 solution further improved the crude oil removal efficiency (CORE). Washing parameters (temperature, washing time, agitation speed and solution/soil ratio) were investigated and further optimized integratedly with an orthogonal design. At the optimum conditions, the CORE reached 97%. GC/MS analysis showed that the proportion of small n-alkanes (C(16)-C(23)) in residual crude oil gradually increased, which was helpful to interpret the oil removal mechanism. Moreover, eminent effect on removal of large n-alkanes was achieved from the synergy between APG1214 and inorganic salts, which was opposite to the effect when they were added separately. This study demonstrated a promising way to remediate COCS with ecologically compatible surfactant and provided guidelines for its practical application.

  20. Electron attachment to PSCl3.

    PubMed

    Knighton, W B; Miller, Thomas M; Grimsrud, E P; Viggiano, A A

    2004-01-01

    Electron attachment to PSCl3 was studied in 133-Pa pressure of helium gas at temperatures from 298-550 K. Measurements of rate constants and branching fractions were made in a flowing-afterglow Langmuir-probe (FALP) apparatus. These experiments yielded an electron attachment rate constant of 5.1 x 10(-8) cm3 s(-1) that was found not to change significantly in the 298-550 K temperature range. This rate constant represents an attachment efficiency of about 14%. Attachment in 133 Pa of He gas yielded only the dissociative ion products PSCl2- and Cl-. The FALP data suggest that there is an activation energy of about 17 meV for production of PSCl2-. Attachment to PSCl3 was also studied at high pressure (9-93 kPa) of N2 in an ion mobility mass spectrometer, at 298 K. In contrast to the low-pressure data, the parent anion product channel (PSCl3-) was observed (along with the dissociative channels), and increased in importance with N2 pressure. Gaussian-3 (G3) calculations were carried out for PSCl3 and PSCl2 neutrals and anions to aid in interpretation of the experimental results. The calculations indicate that the electron affinity EA(PSCl2) is slightly smaller than EA(Cl), which may account for the observed branching fractions for PSCl2- and Cl- in the low-pressure experiments. A natural population analysis was performed to obtain the charges associated with each atom in the molecules in order to estimate how the attached electron is distributed. Comparison is made between the present study of electron attachment to PSCl3 and our earlier work on attachment to POCl3, and G3 calculations are reported here for neutral and anionic POCl2 and POCl3. In contrast to PSCl2, the calculations imply that EA(POCl2) is slightly greater than EA(Cl). For both PSCl3 and POCl3, the calculations show that the dissociative electron attachment process is close to thermoneutral.