Science.gov

Sample records for alkyl hydroxytyrosyl ethers

  1. Antioxidant activity of alkyl hydroxytyrosyl ethers in unsaturated lipids.

    PubMed

    Cert, Rosa; Madrona, Andrés; Espartero, José Luis; Pérez-Camino, M Carmen

    2015-06-01

    The antioxidant activity of ethyl and octyl hydroxytyrosyl ethers toward lipids was determined using the Rancimat and open cup methods at high temperatures and 50 °C, respectively. The effect of the unsaturation of the matrix was evaluated using sunflower, soya, and fish refined oils. The antioxidant activities of alkyl hydroxytyrosyl ethers (HTy ethers), hydroxytyrosyl esters, and free hydroxytyrosol are similar, and are much higher than that of α-tocopherol at the same millimolar concentration. The relationship between the induction period and the concentration of the HTy ethers is a sigmoidal curve; an accurate concentration of HTy ethers is necessary to achieve maximum activity, as it increases with the level of matrix unsaturation. The presence of tocopherols in commercial oils affects the antioxidant effect of HTy ethers. Thus, the addition of a low concentration of HTy ethers results in a positive effect, whereas the effect of the addition of high amounts of ethers is slightly less than that of the phenol alone. The addition of HTy ethers to commercial refined oils increases the stability of the oils and preserves tocopherols and polyunsaturated fatty acids from oxidation, enabling the oils to maintain their nutritional properties for longer periods of time. PMID:26018773

  2. Neuroprotective effect of alkyl hydroxytyrosyl ethers in rat brain slices subjected to a hypoxia-reoxygenation model.

    PubMed

    Guerrero, A; De la Cruz, J P; Muñoz-Marín, J; López-Villodres, J A; Madrona, A; Espartero, J L; González-Correa, J A

    2012-10-15

    The aim of the present study was to investigate the antioxidant and possible neuroprotective and antioxidant effects of five alkyl hydroxytyrosyl (HT) ethers (ethyl, butyl, hexyl, octyl and dodecyl) in rat brain slices. None of the compounds modified lipid peroxidation or glutathione concentrations (GSH) in oxygenated samples. The effects of oxidative stress were investigated with ferrous salts to induce lipid peroxidation and diethylmaleate (DEM) to reduce GSH. All compounds inhibited lipid peroxidation with an inhibitory concentration 50% (IC(50)) one tenth that of HT. These compounds, especially the butyl derivative, prevented GSH depletion after incubation with DEM. We also explored the neuroprotective effect of these compounds in an experimental model of hypoxia-reoxygenation in rat brain slices. All compounds showed neuroprotective and antioxidant effects. Our results established a relationship between these effects and the length of the carbon chain (maximum effect in the range of C4-C8). PMID:23442672

  3. Hydroxytyrosyl alkyl ether derivatives inhibit platelet activation after oral administration to rats.

    PubMed

    Muñoz-Marín, Javier; De la Cruz, José Pedro; Reyes, José Julio; López-Villodres, Juan Antonio; Guerrero, Ana; López-Leiva, Inmaculada; Espartero, José Luis; Labajos, María Teresa; González-Correa, José Antonio

    2013-08-01

    The low lipophilicity of hydroxytyrosol (HT) has motivated efforts to synthesize homologous series with better lipid solubility, such as the ethers, which are more lipophilic than HT. Because HT inhibits platelet aggregation, the aim of the study was to assess the possible anti-platelet effect of five HT ether derivatives (ethyl, butyl, hexyl, octyl and dodecyl) after oral administration to rats. Whole blood collagen-induced platelet aggregation and calcium-induced thromboxane B2 (TxB2), aortic 6-keto-prostaglandin F1α (6-keto-PGF1α) and nitrites+nitrates, plasma concentration of lipid peroxides (TBARS) and red blood cell content of reduced glutathione (GSH) were measured. The administration of 20 mg/kg/day inhibited platelet aggregation, TxB2 and TBARS in a non-linear manner related to the length of the carbon chain, with a cut-off effect in the hexyl derivative. Aortic nitrite and red blood cell GSH production were also increased. The aortic production of 6-keto-PGF1α was unaltered except in the group treated with the dodecyl derivative. The administration of 50 mg/kg/day showed a similar pharmacodynamic profile but without the non-linear effect. In conclusion, HT ethers, especially the hexyl derivative, are a potential alternative to hydroxytyrosol, and their effect merits additional research to determine their role in the prophylaxis of vascular disease. PMID:23643702

  4. Comparative evaluation of the metabolic effects of hydroxytyrosol and its lipophilic derivatives (hydroxytyrosyl acetate and ethyl hydroxytyrosyl ether) in hypercholesterolemic rats.

    PubMed

    Tabernero, María; Sarriá, Beatriz; Largo, Carlota; Martínez-López, Sara; Madrona, Andrés; Espartero, José Luis; Bravo, Laura; Mateos, Raquel

    2014-07-25

    Hydroxytyrosol (HT), a virgin olive oil phenolic phytochemical with proven health benefits, has been used to generate new lipophilic antioxidants to preserve fats and oils against autoxidation. The aim of this work is to comparatively evaluate the physiological effects of HT and its lipophilic derivatives, hydroxytyrosyl acetate (HT-Ac) and ethyl hydroxytyrosyl ether (HT-Et), in high-cholesterol fed animals. Male Wistar rats (n = 8) were fed a standard diet (C group), a cholesterol-rich diet (Chol group) or a cholesterol-rich diet supplemented with phenolic compounds (HT group, HT-Ac group and HT-Et group) for 8 weeks. Body and tissue weights, the lipid profile, redox status, and biochemical, hormonal, and inflammatory biomarkers were evaluated. Plasma levels of total cholesterol, LDL cholesterol, glucose, insulin and leptin, as well as malondialdehyde in serum increased in Chol compared to C (p < 0.05). Rats fed the test diets had improved glucose, insulin, leptin and MDA levels and antioxidant capacity status, with HT-Ac being the most effective compound. The studied phenolic compounds also modulated TNF-α and IL-1β plasma levels compared to Chol. HT-Ac and HT-Et improved adipose tissue distribution and adipokine production, decreasing MCP-1 and IL-1β levels. Our results confirm the metabolic effects of HT, which are maintained and even improved by hydrophobic derivatives, particularly HT-Ac. PMID:24855654

  5. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  6. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  7. Oil compositions containing alkyl amine or alkyl mercaptan derivatives of copolymers of an alpha olefin or an alkyl vinyl ether

    SciTech Connect

    Le, H.T.

    1990-02-13

    This patent describes an oil composition. It comprises a major amount of an oil selected from a crude oil or fuel oil and a minor amount of an alkyl amine or alkyl mercaptan derivative of an alpha olefin or alkyl vinyl ether and an unsaturated alpha, beta-dicarboxylic compound copolymer having pour point depressant ;properties. The copolymer comprising the reaction product of an alpha olefin having from about 2 to about 30 carbon atoms or mixtures of alpha olefins having from about 2 to about 30 carbon atoms or an alkyl vinyl ether or mixture of alkyl vinyl ethers.

  8. Alkyl Aryl Ether Bond Formation with PhenoFluor**

    PubMed Central

    Shen, Xiao; Neumann, Constanze N.; Kleinlein, Claudia; Claudia, Nathaniel W.; Ritter, Tobias

    2015-01-01

    An alkyl aryl ether bond formation reaction between phenols and primary and secondary alcohols with PhenoFluor has been developed. The reaction features a broad substrate scope and tolerates many functional groups, and substrates that are challenging for more conventional ether bond forming processes may be coupled. A preliminary mechanistic study indicates reactivity distinct from conventional ether bond formation. PMID:25800679

  9. HPLC and TLC characterisation of ecdysteroid alkyl ethers.

    PubMed

    Lapenna, Silvia; Dinan, Laurence

    2009-10-01

    Semi-synthetic ecdysteroid alkyl ethers have increased potential over natural ecdysteroids as actuators of ligand-inducible gene-expression systems based on the ecdysteroid receptor for in vivo applications. However, a scalable synthesis of these compounds has yet to be developed. We report a set of reversed-phase (RP; C(18) and C(6)) and normal-phase (NP; diol) HPLC systems which can be used to analyse and separate ecdysteroid ethers with single or multiple O-methyl substitutions at the 2alpha-, 3beta-, 14alpha-, 22- and 25-positions. The elution order of methyl ether analogues of the prototypical ecdysteroid 20-hydroxyecdysone (20E) was 3-methyl<2-methyl<14-methyl<25-methyl<22-methyl with both C(18)- and C(6)-RP-HPLC, when eluted with methanol/water mixtures. Further, the elution order of 20E 22-O-alkyl ethers was methylalkyl ethers can also be adequately resolved by NP-HPLC and silica HPTLC. On the latter, detection of ecdysteroid O-alkyl ethers with the p-anisaldehyde/sulphuric acid reagent distinguishes 22-O-alkyl ethers from non-22-O-alkyl ether analogues by the colour of the resulting spot. PMID:19648067

  10. Dichloromethyl alkyl ethers and sulfides in the Reformatskii reaction

    SciTech Connect

    Lapkin, I.I.; Fotin, V.V.

    1986-09-10

    A study was carried out on the reaction of dichloromethyl alkyl ethers and sulfides with ..cap alpha..-brominated esters in the presence of zinc resulting in the formation of either ..cap alpha..-alkyl-..beta..-alkoxyacrylates (or ..cap alpha..-alkyl-..beta..-alkylthioacrylates) or ..cap alpha..,..cap alpha..,..cap alpha..',..cap alpha..'-tetramethyl-..beta..-alkoxyglutaric acid (or ..cap alpha..,..cap alpha..,..cap alpha..',..cap alpha..'-tetramethyl-..beta..-alkylthioglutaric acid) depending on the structure of the starting bromoester. PMR and IR spectroscopy indicates the geometry of the ..cap alpha..-alkyl-..beta..-alkoxyacrylates and ..cap alpha..-alkyl-..beta..-alkylthioacrylates.

  11. 40 CFR 721.10669 - Tertiary amine alkyl ether (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tertiary amine alkyl ether (generic). 721.10669 Section 721.10669 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10669...

  12. 40 CFR 721.10669 - Tertiary amine alkyl ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tertiary amine alkyl ether (generic). 721.10669 Section 721.10669 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10669...

  13. 40 CFR 721.3845 - Alkyl substituted aromatic glycidyl ether (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ether (generic). 721.3845 Section 721.3845 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3845 Alkyl substituted aromatic glycidyl ether (generic). (a) Chemical... as alkyl substituted aromatic glycidyl ether (PMN P-97-661) is subject to reporting under...

  14. 40 CFR 721.3845 - Alkyl substituted aromatic glycidyl ether (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ether (generic). 721.3845 Section 721.3845 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3845 Alkyl substituted aromatic glycidyl ether (generic). (a) Chemical... as alkyl substituted aromatic glycidyl ether (PMN P-97-661) is subject to reporting under...

  15. Safety Assessment of Alkyl PEG/PPG Ethers as Used in Cosmetics.

    PubMed

    Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2016-07-01

    The Cosmetic Ingredient Review (CIR) Expert Panel assessed the safety of 131 alkyl polyethylene glycol (PEG)/polypropylene glycol ethers as used in cosmetics, concluding that these ingredients are safe in the present practices of use and concentration described in this safety assessment when formulated to be nonirritating. Most of the alkyl PEG/PPG ethers included in this review are reported to function in cosmetics as surfactants, skin-conditioning agents, and/or emulsifying agents. The alkyl PEG/PPG ethers share very similar physiochemical properties as the alkyl PEG ethers, which were reviewed previously by the CIR Expert Panel and found safe when formulated to be nonirritating. The alkyl PEG ethers differ by the inclusion of PPG repeat units, which are used to fine-tune the surfactant properties of this group. The Panel relied heavily on data on analogous ingredients, extracted from the alkyl PEG ethers and PPG reports, when making its determination of safety. PMID:27383199

  16. Chemistry of enol ethers. LXXXVIII. Condensation of the tetraethylacetal of malonaldehyde with /beta/-substituted enol alkyl ethers

    SciTech Connect

    Makin, S.M.; Kruglikova, R.I.; Kharitonova, O.V.; Arshava, B.M.

    1988-03-10

    The action of /beta/-substituted enol ethers on the tetraethylacetal of malonaldehyde gave the acetals of 1,5- and 1,7-dialdehydes. The nature of the substituent in the enol ether was found to affect the regioselectivity of the reaction: condensation with ethers containing an electron-withdrawing substituent leads to 1,5-dialdehyde acetals, while condensation with ethers containing a strong electron-donor substituent leads to 1,7-dialdehyde acetals. The condensation of malonaldehyde tetraethylacetal with /beta/-substituted enol alkyl ethers was carried out at room temperature in the presence of zinc chloride as catalyst.

  17. Oil compositions containing alkyl mercaptan derivatives of copolymers of an alpha olefin or an alkyl vinyl ether and an unsaturated alpha, beta-dicarboxylic compound

    SciTech Connect

    Le, H.T.

    1991-10-08

    This paper describes an oil composition. It comprises: a major amount of an oil selected from a mineral oil or synthetic oil and a manor amount of an alkyl mercaptan derivative of an alpha olefin or alkyl vinyl either and an unsaturated alpha, beta-dicarboxylic compound copolymer having pour point depressant properties, the copolymer comprising the reaction product of an alpha a olefin having from about 2 to about 30 carbon atoms or mixtures of alpha olefins having from about 2 to about 30 carbonates or an alkyl vinyl ether or mixture of alkyl vinyl ethers.

  18. 40 CFR 721.3845 - Alkyl substituted aromatic glycidyl ether (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... as alkyl substituted aromatic glycidyl ether (PMN P-97-661) is subject to reporting under this... in § 721.125 (a), (b), (c),(d),(e), (f), (g), (h),(i), and (k) are applicable to manufacturers... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses...

  19. 40 CFR 721.3845 - Alkyl substituted aromatic glycidyl ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... as alkyl substituted aromatic glycidyl ether (PMN P-97-661) is subject to reporting under this... in § 721.125 (a), (b), (c),(d),(e), (f), (g), (h),(i), and (k) are applicable to manufacturers... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses...

  20. 40 CFR 721.10059 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Reaction product of alkylphenyl... SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10059 Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

  1. 40 CFR 721.10059 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Reaction product of alkylphenyl... SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10059 Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

  2. 40 CFR 721.10059 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Reaction product of alkylphenyl... SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10059 Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

  3. 40 CFR 721.10059 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Reaction product of alkylphenyl... SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10059 Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

  4. 40 CFR 721.10059 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Reaction product of alkylphenyl... SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10059 Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

  5. Condensation of perfluoroisobutylene with perfluorinated vinyl alkyl ethers

    SciTech Connect

    Postovoi, S.A.; Zeifman, Yu.V.; Knunyants, I.L.

    1986-12-10

    Condensation of perfluoroisobutylene with perfluorovinyl aklyl ethers with CsF catalysis takes place according to a scheme of concerted nucleophilic addition, with participation of the perfluoro-tert-butyl anion as nucleophile and perfluoroisobutylene as electrophile. In the presence of CO/sub 2/ the product of concerted perfluoroalkylcarboxylation forms.

  6. Microemulsion formed by alkyl polyglucoside and an alkyl glycerol ether with weakly charged films.

    PubMed

    Fukuda; Olsson; Ueno

    2001-02-01

    We have studied the effects on phase equilibria of a nonionic surfactant mixture-water-oil system when replacing small amount of surfactant molecules by ionic surfactant, sodium dodecyl sulfate (SDS). The nonionic surfactant system contains dodecyl-beta-D-maltoside (C(12)AG2) and iso-octyl glyceryl ether (i-C(8)GE) as cosurfactant, water and cyclohexane at constant water to oil ratio of 60/40 (w/w). Adding a small amount of SDS has large impact on the phase behavior. Clear liquid crystalline phase and upper microemulsion phase are added to the phase sequence at high i-C(8)GE/(C(12)AG2+i-C(8)GE) ratio. We also compare the phase equilibria of pure dodecyl maltoside system with polyglucosides mixture system. PMID:11087985

  7. Influence of Alkoxy Groups on the Photoinduced Dynamics of Organic Molecules Exemplified on Alkyl Vinyl Ethers.

    PubMed

    Schalk, O; Stenrup, M; Geng, T; Lindh, R; Thomas, R D; Feifel, R; Hansson, T

    2015-11-12

    A series of different alkyl vinyl ethers is investigated to decipher the possible reaction channels upon photoexcitation to the π3s-Rydberg and the ππ*-valence state at 200 nm using time-resolved photoelectron spectroscopy and on-the-fly time-dependent density functional theory dynamics simulations. The results indicate two possible relaxation pathways: (1) a radiationless decay through the ππ*-state back to the ground state via torsion of the C═C double bond, in accordance with the dynamics found in ethylene; and (2) a fast dissociation of the C-O bond between the alkyl and the vinoxy group in the πσ*-state. The latter state can be accessed only after excitation to the π3s-Rydberg state (quantum yield of ∼50% according to the dynamics simulations). Additionally, the excited state barrier leading to formation of a vinyl radical was found to be too high to be crossed. These results indicate that the dynamics of ethers crucially depend on the excitation wavelength and that the πσ*-state constitutes an important competitive reaction channel that leads to dissociation of the molecules. PMID:26490385

  8. New lipophilic tyrosyl esters. Comparative antioxidant evaluation with hydroxytyrosyl esters.

    PubMed

    Mateos, Raquel; Trujillo, Mariana; Pereira-Caro, Gema; Madrona, Andrés; Cert, Arturo; Espartero, José Luis

    2008-11-26

    New lipophilic esters of tyrosol, a naturally occurring phenol with interesting biological properties, have been synthesized in good yields by a chemoselective procedure, using lipase from Candida antarctica or p-toluenesulfonic acid as catalysts. Their antioxidant activities have been evaluated by the Rancimat test in lipophilic food matrices, as well as by FRAP and ABTS assays in methanolic solutions, and compared with those of previously synthesized hydroxytyrosyl esters. Free tyrosol, hydroxytyrosol, butylhydroxytoluene, and alpha-tocopherol were used as standards. All methods used for the antioxidant activity evaluation emphasized the high influence of the ortho-diphenolic structure on the antioxidant capacity, tyrosol and its derivatives being less active than hydroxytyrosol and its analogues and even less than BHT and alpha-tocopherol. In addition, the Rancimat test revealed a lower activity for ester derivatives than for their respective reference compounds (HTy or Ty), in agreement with the polar paradox. On the other hand, FRAP and ABTS methods reported an opposite behavior between the synthetic esters and their respective references. Thus, hydroxytyrosyl esters were more active than HTy, whereas tyrosyl esters were less active than Ty. The length and nature of the acyl side chain did not seem to play an important role in the antioxidant activity of either the hydroxytyrosyl or tyrosyl ester series, since no significant differences were observed among them. PMID:18983160

  9. 40 CFR 721.10556 - Poly(oxy-1,2-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-15-alkyl ethers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Poly(oxy-1,2-ethanediyl), .alpha.- (2...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-15-alkyl ethers. (a) Chemical substance...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-15-alkyl ethers (PMN P-06-450; CAS...

  10. 40 CFR 721.10557 - Poly(oxy-1,2-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C10-16-alkyl ethers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Poly(oxy-1,2-ethanediyl), .alpha.- (2...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C10-16-alkyl ethers. (a) Chemical substance...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C10-16-alkyl ethers (PMN P-06-451; CAS...

  11. 40 CFR 721.10556 - Poly(oxy-1,2-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-15-alkyl ethers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Poly(oxy-1,2-ethanediyl), .alpha.- (2...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-15-alkyl ethers. (a) Chemical substance...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-15-alkyl ethers (PMN P-06-450; CAS...

  12. 40 CFR 721.10558 - Poly(oxy-1,2-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-16-alkyl ethers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Poly(oxy-1,2-ethanediyl), .alpha.- (2...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-16-alkyl ethers. (a) Chemical substance...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-16-alkyl ethers (PMN P-06-452; CAS...

  13. 40 CFR 721.10557 - Poly(oxy-1,2-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C10-16-alkyl ethers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Poly(oxy-1,2-ethanediyl), .alpha.- (2...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C10-16-alkyl ethers. (a) Chemical substance...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C10-16-alkyl ethers (PMN P-06-451; CAS...

  14. 40 CFR 721.10558 - Poly(oxy-1,2-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-16-alkyl ethers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Poly(oxy-1,2-ethanediyl), .alpha.- (2...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-16-alkyl ethers. (a) Chemical substance...-ethanediyl), .alpha.- (2-methyl-2-propen-1-yl) -.omega.-hydroxy-,C12-16-alkyl ethers (PMN P-06-452; CAS...

  15. [Occupational lung cancer after inhalation of alkylating compounds: dichlordimethyl ether, monochlordimethyl ether and dimethyl sulphate (author's transl)].

    PubMed

    Bettendorf, U

    1977-03-18

    A 42-year-old chemist died from extensive pulmonary carcinoma, having inhaled for over seven years dichlordimethyl ether, monochlordimethyl ether and small amounts of dimethyl sulphate. This exposure took place in circumstances which, in animal experiments, have led to the development of cancer. A causal connection between the occupational exposure to these chemicals and carcinogenesis has to be accepted. PMID:844406

  16. Versatile assembly of p-carboxylatocalix[4]arene-O-alkyl ethers

    SciTech Connect

    Kennedy, Stuart; Teat, Simon J.; Dalgarno, Scott J.

    2009-07-08

    Crystallisation of lower-rim tetra-O-alkylated p-carboxylatocalix[4]arenes from pyridine results in the formation of both bi-layer and pillar type supramolecular motifs. Full alkylation at the calixarene lower rim has significant influence over the supramolecular self-assembly motif, including preclusion of pyridine guest molecules from the calixarene cavity in the solid state.

  17. Structure and Reactivity of Alkyl Ethers Adsorbed on CeO(2)(111) Model Catalysts

    SciTech Connect

    Calaza, Florencia C; Chen, Tsung-Liang; Mullins, David R; Overbury, Steven {Steve} H

    2011-01-01

    The effect of surface hydroxyls on the adsorption of ether on ceria was explored. Adsorption of dimethyl ether (DME) and diethyl ether (DEE) on oxidized and reduced CeO{sub 2}(111) films was studied and compared with Ru(0001) using RAIRS and sXPS within a UHV environment. On Ru(0001) the ethers adsorb weakly with the molecular plane close to parallel to the surface plane. On the ceria films, the adsorption of the ethers was stronger than on the metal surface, presumably due to stronger interaction of the ether oxygen lone pair electrons with a cerium cation. This interaction causes the ethers to tilt away from the surface plane compared to the Ru(0001) surface. No pronounced differences were found between oxidized (CeO{sub 2}) and reduced (CeOx) films. The adsorption of the ethers was found to be perturbed by the presence of OH groups on hydroxylated CeOx. In the case of DEE, the geometry of adsorption resembles that found on Ru, and in the case of dimethyl ether DME is in between that one found on clean CeOx and the metal surface. Decomposition of the DEE was observed on the OH/CeOx surface following high DEE exposure at 300 K and higher temperatures. Ethoxides and acetates were identified as adsorbed species on the surface by means of RAIRS and ethoxides and formates by s-XPS. No decomposition of dimethyl ether was observed on the OH/CeOx at these higher temperatures, implying that the dissociation of the C-O bond from ethers requires the presence of {beta}-hydrogen.

  18. Structure and Reactivity of Alkyl Ethers Adsorbed on CeO2(111) Model Catalysts

    SciTech Connect

    F Calaza; T Chen; D Mullins; S Overbury

    2011-12-31

    The effect of surface hydroxyls on the adsorption of ether on ceria was explored. Adsorption of dimethyl ether (DME) and diethyl ether (DEE) on oxidized and reduced CeO{sub 2}(111) films was studied and compared with Ru(0001) using RAIRS and sXPS within a UHV environment. On Ru(0001) the ethers adsorb weakly with the molecular plane close to parallel to the surface plane. On the ceria films, the adsorption of the ethers was stronger than on the metal surface, presumably due to stronger interaction of the ether oxygen lone pair electrons with a cerium cation. This interaction causes the ethers to tilt away from the surface plane compared to the Ru(0001) surface. No pronounced differences were found between oxidized (CeO{sub 2}) and reduced (CeOx) films. The adsorption of the ethers was found to be perturbed by the presence of OH groups on hydroxylated CeOx. In the case of DEE, the geometry of adsorption resembles that found on Ru, and in the case of dimethyl ether DME is in between that one found on clean CeOx and the metal surface. Decomposition of the DEE was observed on the OH/CeOx surface following high DEE exposure at 300 K and higher temperatures. Ethoxides and acetates were identified as adsorbed species on the surface by means of RAIRS and ethoxides and formates by s-XPS. No decomposition of dimethyl ether was observed on the OH/CeOx at these higher temperatures, implying that the dissociation of the C-O bond from ethers requires the presence of {beta}-hydrogen.

  19. Tandem β-elimination/hetero-michael addition rearrangement of an N-alkylated pyridinium oxime to an O-alkylated pyridine oxime ether: an experimental and computational study.

    PubMed

    Picek, Igor; Vianello, Robert; Šket, Primož; Plavec, Janez; Foretić, Blaženka

    2015-02-20

    A novel OH(-)-promoted tandem reaction involving C(β)-N(+)(pyridinium) cleavage and ether C(β)-O(oxime) bond formation in aqueous media has been presented. The study fully elucidates the fascinating reaction behavior of N-benzoylethylpyridinium-4-oxime chloride in aqueous media under mild reaction conditions. The reaction journey begins with the exclusive β-elimination and formation of pyridine-4-oxime and phenyl vinyl ketone and ends with the formation of O-alkylated pyridine oxime ether. A combination of experimental and computational studies enabled the introduction of a new type of rearrangement process that involves a unique tandem reaction sequence. We showed that (E)-O-benzoylethylpyridine-4-oxime is formed in aqueous solution by a base-induced tandem β-elimination/hetero-Michael addition rearrangement of (E)-N-benzoylethylpyridinium-4-oximate, the novel synthetic route to this engaging target class of compounds. The complete mechanistic picture of this rearrangement process was presented and discussed in terms of the E1cb reaction scheme within the rate-limiting β-elimination step. PMID:25562471

  20. Iron-Catalyzed Cross-Coupling of Unactivated, Secondary Alkyl Thio Ethers and Sulfones with Aryl Grignard Reagents

    PubMed Central

    Denmark, Scott E.; Cresswell, Alexander J.

    2013-01-01

    The first systematic investigation of unactivated aliphatic sulfur compounds as electrophiles in transition metal-catalyzed cross-coupling are described. Initial studies focused on discerning the structural and electronic features of the organosulfur substrate which enable the challenging oxidative addition to the C(sp3)–S bond. Through extensive optimization efforts, an Fe(acac)3-catalyzed cross-coupling of unactivated alkyl aryl thio ethers with aryl Grignard reagents was realized, in which a nitrogen “directing group” on the S-aryl moiety of the thio ether served a critical role in facilitating the oxidative addition step. In addition, alkyl phenyl sulfones were found to be effective electrophiles in the Fe(acac)3-catalyzed cross-coupling with aryl Grignard reagents. For the latter class of electrophile, a thorough assessment of the various reaction parameters revealed a dramatic enhancement in reaction efficiency with an excess of TMEDA (8.0 equiv). The optimized reaction protocol was used to evaluate the scope of the method with respect to both the organomagnesium nucleophile and sulfone electrophile. PMID:24256193

  1. Lewis Acid Assisted Nickel-Catalyzed Cross-Coupling of Aryl Methyl Ethers by C-O Bond-Cleaving Alkylation: Prevention of Undesired β-Hydride Elimination.

    PubMed

    Liu, Xiangqian; Hsiao, Chien-Chi; Kalvet, Indrek; Leiendecker, Matthias; Guo, Lin; Schoenebeck, Franziska; Rueping, Magnus

    2016-05-10

    In the presence of trialkylaluminum reagents, diverse aryl methyl ethers can be transformed into valuable products by C-O bond-cleaving alkylation, for the first time without the limiting β-hydride elimination. This new nickel-catalyzed dealkoxylative alkylation method enables powerful orthogonal synthetic strategies for the transformation of a variety of naturally occurring and easily accessible anisole derivatives. The directing and/or activating properties of aromatic methoxy groups are utilized first, before they are replaced by alkyl chains in a subsequent coupling process. PMID:27062726

  2. 40 CFR 721.10060 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, alkyl diglycidyl dibenzene...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Specific Chemical Substances § 721.10060 Reaction product of alkylphenyl glycidyl ether... significant new uses subject to reporting. (1) The chemical substance identified generically as reaction... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Reaction product of...

  3. 40 CFR 721.10060 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, alkyl diglycidyl dibenzene...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Specific Chemical Substances § 721.10060 Reaction product of alkylphenyl glycidyl ether... significant new uses subject to reporting. (1) The chemical substance identified generically as reaction... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Reaction product of...

  4. 40 CFR 721.10060 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, alkyl diglycidyl dibenzene...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Specific Chemical Substances § 721.10060 Reaction product of alkylphenyl glycidyl ether... significant new uses subject to reporting. (1) The chemical substance identified generically as reaction... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Reaction product of...

  5. 40 CFR 721.10060 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, alkyl diglycidyl dibenzene...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Specific Chemical Substances § 721.10060 Reaction product of alkylphenyl glycidyl ether... significant new uses subject to reporting. (1) The chemical substance identified generically as reaction... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Reaction product of...

  6. 40 CFR 721.10060 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, alkyl diglycidyl dibenzene...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Specific Chemical Substances § 721.10060 Reaction product of alkylphenyl glycidyl ether... significant new uses subject to reporting. (1) The chemical substance identified generically as reaction... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Reaction product of...

  7. Digestion of the 1-O-alkyl diacylglycerol ethers of Atlantic dogfish liver oils by Atlantic salmon Salmo salar.

    PubMed

    Kang, S J; Lall, S P; Ackman, R G

    1997-01-01

    Dogfish (Squalus acanthias) liver poses a waste disposal problem in Canada because it is not utilized for any commercial purpose. The liver of Atlantic dogfish, which is often up to 20% of the weight of the fish, contains 40-70% oil. The oil contains about 30-40% 1-O-alkyl diacylglycerol ethers (DAGE) which render it unacceptable for human use, and it has also not been considered satisfactory for animal feed use. Polyunsaturated fatty acids (20:5n-3 and 22:6n-3) are present in dogfish liver oils at levels comparable to those in herring oil. Dogfish liver oil could be a source of essential fatty acids for Atlantic salmon (Salmo salar), but their ability to hydrolyze DAGE from dogfish oil has not been examined. Experiments were designed to measure the digestibility of fatty acids of DAGE in salmon. The fatty acid moieties were liberated by the digestive enzymes of the fish and made readily available as a source of energy. The 1-O-alkylglycerol ether moiety was absorbed to a small extent but should not constitute a health problem in either the fish or the human fish consumer. The long-chain polyunsaturated fatty acids were particularly well absorbed, with an apparent digestibility in salmon of 87-95% when feeding on dogfish liver oil. The total fatty acids and other lipids were in fact both absorbed to the extent of approximately 85%. PMID:9075189

  8. N-alkyl pyrrolidone ether podands as versatile alkali metal ion chelants.

    PubMed

    Perrin, Andrea; Myers, Dominic; Fucke, Katharina; Musa, Osama M; Steed, Jonathan W

    2014-02-28

    This work explores the coordination chemistry of a bis(pyrrolidone) ether ligand. Pyrrolidones are commercially important functional groups because of the high polarity and hence high hydrophilicity and surface affinity. An array of alkali metal ion complexes of a podand bearing two pendant pyrrolidone functionalities, namely 1-{2-[2-(2-oxo-pyrrolid-1-yl)-ethoxy]-ethyl}-pyrrolid-2-one (1) are reported. Reaction of this ligand with sodium hexafluorophosphate gives two discrete species of formulae [Na(1)2]PF6 (3) and [Na3(H2O)2(μ-1)2](PF6)3 (4), and a coordination polymer {[Na3(μ3-1)3(μ2-1)](PF6)3}n (5). The same reaction in methanol gives a 1 : 1 complex, namely [Na2(μ-1)2(MeOH)2](PF6)2 (6). Use of tetraphenyl borate as a less coordinating counter ion gives [Na2(1)2(H2O)4](BPh4)2 (7) and [Na2(1)4](BPh4)2 (8). Two potassium complexes have also been isolated, a monomer [K(1)2]PF6 (9) and a cyclic tetramer [K4(μ4-H2O)2(μ-1)4](PF6)4 (10). The structures illustrate the highly polar nature of the amide carbonyl moiety within bis(pyrrolidone) ethers with longer interactions to the ether oxygen atom. The zinc complex is also reported and {[ZnCl2(μ-1)]}n (11) exhibits bonding only to the carbonyl moieties. The ether oxygen atom is not necessary for Na(+) complexation as exemplified by the structure of the sodium complex of the analogue 1,3-bis(pyrrolid-2-on-1-yl)butane (2). Reaction of compound 1 with lithium salts results in isolation of the protonated ligand. PMID:24336897

  9. Stabilization of alkylated azacrown ether by fatty acid at the air-water interface.

    PubMed

    Zarbakhsh, Ali; Campana, Mario; Webster, John R P; Wojciechowski, Kamil

    2010-12-01

    The adsorbed amount of partially deuterated dihexadecyl-diaza-18-crown-6 ether (d-ACE16) in the presence of different chain length fatty acids as a function of surface pressure was determined by neutron reflectometry technique. The highest adsorbed amount of the azacrown ether was observed for the mixture of ACE16 with hexadecanoic (palmitic) acid, pointing to the importance of chain length matching between the two species for optimum stabilization of the mixed monolayer. The contrast variation technique was used to estimate the contribution to the total adsorbed amount from stearic acid and ACE16. It was found that the mixed Langmuir monolayer is stable against dissolution up to a surface pressure of 20 mN m(-1). Above this pressure, however, the spread and adsorbed amounts start to deviate, indicative of partial dissolution into the aqueous subphase. The consequences of this behavior for the transport of metal ions through the interfaces of permeation liquid membranes (PLMs) are discussed. PMID:21049946

  10. Characterization and quantitation of mixtures of alkyl ether sulfates and carboxylic acids by capillary electrophoresis with indirect photometric detection.

    PubMed

    Bernabé-Zafón, Virginia; Ortega-Gadea, Silvia; Simó-Alfonso, Ernesto F; Ramis-Ramos, Guillermo

    2003-08-01

    The separation, characterization, and determination of mixtures of alkyl ether sulfates (AES) and fatty acids (C10-C16) in background electrolytes (BGEs) containing acetonitrile (ACN)-water mixtures is addressed. Due to inhibition of the ionization of the carboxylate groups, the migration time and the resolution between the fatty acids decreased when the water content of the BGE was reduced, but efficiency and resolution between the AES oligomers improved. The migration times increased and resolution improved by substituting 5% ACN by an equivalent amount of dioxane. A complete separation of the two surfactant classes, up to the AES oligomers with 8 ethylene oxide units (EOs) with respect to C10, with excellent resolution between the AES oligomers, while preserving a satisfactory resolution between the fatty acids, was achieved with a BGE containing 5 mM trimethoxybenzoic acid, 7 mM dipentylamine, 85% ACN, 5% dioxane, and 10% water. The two surfactant classes were increasingly resolved by further reducing the water content of the BGE. Thus, C2 (acetate) was resolved from the AES oligomers up to 7 EOs using 90% ACN and 5% dioxane, but the resolution between the heavier fatty acids was poor with this BGE. Identification of the AES oligomers was eased by the excellent regularity of the successive migration times; thus, within each AES subclass or series of oligomers with the same number of carbon atoms in the alkyl chain, the migration times decreased following a mild curve as the number of EOs increased. The way how the data obtained by indirect photometry (corrected peak areas that are proportional to the molar concentrations) should be managed to avoid systematic error when the calibration curve is constructed using an AES standard with an oligomer distribution different from that of the samples is discussed and equations are given. Decyl sulfate was successfully used as internal standard. The detection limits (S/N = 3) were of ca. 2 microM for individual AES

  11. Asymmetric Total Synthesis of (+)- and (−)-Clusianone and (+)- and (−)Clusianone Methyl Enol Ether via ACC Alkylation and Evaluation of their Anti-HIV Activity

    PubMed Central

    Garnsey, Michelle R.; Matous, James A.; Kwiek, Jesse J.; Coltart, Don M.

    2011-01-01

    The total asymmetric synthesis of (+)- and (−)-clusianone and (+)- and (−)-clusianone methyl enol ether is reported. Asymmetric induction is achieved through the use of ACC alkylation, providing the key intermediates with an er of 99:1. The four synthetic compounds were evaluated for their anti-HIV activity. Both (+)- and (−)-clusianone displayed significant anti-HIV activity. PMID:21414776

  12. The thickening additives for mineral and synthetic oils based on the copolymers of alkyl acrylates or methacrylates and butyl vinyl ether

    NASA Astrophysics Data System (ADS)

    Geraskina, Evgeniya V.; Moikin, Alexey A.; Semenycheva, Ludmila L.

    2014-05-01

    A new method for synthesizing of the copolymers of acrylic and methacrylic acid esters with butyl vinyl ether in an excess of low-boiling monomer, which has proven effective for a number of alkyl methacrylates was proposed. Tests of thickening efficiency of the obtained copolymers were carried out. The resistance to mechanical degradation of the mineral, semi synthetic and synthetic base oils doped with the copolymers was evaluated.

  13. Spontaneous Emulsification of Triolein Induced by Mixed Micellar Solutions of Sodium Polyoxyethylene Alkyl Ether Sulfate and Dodecyldimethyl Amine Oxide.

    PubMed

    Endo, Chika; Ito, Yoshiko; Akabane, Chika; Kaneko, Yukihiro; Sakai, Hideki

    2015-01-01

    A new mechanism of spontaneous emulsification without any salts or co-solvents is described, and is related to the dilatational behavior. Spontaneous emulsification can reduce the time required to remove oily soils from hard surfaces and enhance the detergency, because this type of emulsification requires no external mechanical work. In this paper, we focused on triolein, the main component of food oils and human sebum soil, and tried to induce spontaneous emulsification by using mixed micellar solutions of sodium polyoxyethylene alkyl ether sulfate and N, N-dimethyldodecylamine oxide (AES/DDAO). We characterized the dilatation of the oil/water interface using dynamic interfacial tension and elasticity measurements. This study confirmed that the degree of spontaneous emulsification can be enhanced by controlling the molar ratio of DDAO to AES. This enhancement can be attributed to an increased rate of decrease in the dynamic interfacial tension (i.e., a decreased interface dilatational elasticity), allowing for much greater suppression of the Marangoni effect. Further, we determined that one of the reasons for the decrease in the interface dilatational elasticity is the increasing number of micelles near the oil drop interface, which results from a decrease in the electrostatic repulsion between the micelles and the drop interface. Therefore, controlling the molar ratio of a mixed anionic/amphoteric surfactant solution is an effective way to induce spontaneous emulsification in the absence of salts or co-solvents. PMID:26250425

  14. Structures and Surface Properties of "Cyclic" Polyoxyethylene Alkyl Ethers: Unusual Behavior of Cyclic Surfactants in Water.

    PubMed

    Hirose, Yuki; Taira, Toshiaki; Sakai, Kenichi; Sakai, Hideki; Endo, Akira; Imura, Tomohiro

    2016-08-23

    The cyclization of amphiphiles has emerged as an attractive strategy for inducing remarkable properties in these materials without changing their chemical composition. In this study, we successfully synthesized three cyclic polyoxyethylene dodecyl ethers (c-POEC12's) with different ring sizes and explored the effects of their topology on their surface and self-assembly properties related to their function, comparing them with those of their linear counterparts (l-POEC12's). The surface activity of the c-POEC12's remained almost constant despite the change in their hydrophobic and hydrophilic balance (HLB) value, while that of the l-POEC12's decreased with an increase in the HLB value as general surfactants. In contrast to the normal micelles seen in the case of the l-POEC12's (3.4-9.7 nm), the cyclization of the POEC12's resulted in the formation of large spherical structures 72.8-256.8 nm in size. It also led to a dramatic decrease of 28 °C in the cloud point temperature. Furthermore, the cyclization of the POEC12's markedly suppressed the rate of protease hydrolysis caused by the surfactants. The initial rate of reduction of a detergent enzyme from Bacillus licheniformis was increased by more than 40% in the case of c-POE600C12 and c-POE1000C12, even though they exhibited surface activities almost equal to or higher than those of their linear counterparts. These results suggest that cyclization induces unusual aqueous behaviors in POEC12, making the surfactant milder with respect to detergent enzymes while ensuring it exhibits increased surface activity. PMID:27462805

  15. NMR spectroscopy of heterosubstituted alkenyl alkyl ethers. I. Fast and reliable method for determination of double bond configuration in 2-alkoxyalkenylphosphonic dihaloanhydrides

    SciTech Connect

    Lazhko, E.I.; Trostyanskaya, I.G.; Kazankova, M.A.; Ustynyuk, Yu.A.

    1986-12-20

    As criterion for determination of the geometric configuration of P(III) substituted alkyl vinyl ethers, the importance of the geminal /sup 31/P-/sup 13/C coupling constants was proposed. It was established that the ranges of /sup 2/J (CP) for the E and Z isomers of the investigated series of compounds do not overlap (120.1-40.0 and 31.8-18.6 Hz respectively). This allows the determination of the geometric configuration of a compound even from the /sup 13/C parameters of only one isomer.

  16. Human platelets respond differentially to lysophosphatidic acids having a highly unsaturated fatty acyl group and alkyl ether-linked lysophosphatidic acids.

    PubMed Central

    Tokumura, Akira; Sinomiya, Junya; Kishimoto, Seishi; Tanaka, Tamotsu; Kogure, Kentaro; Sugiura, Takayuki; Satouchi, Kiyoshi; Waku, Keizo; Fukuzawa, Kenji

    2002-01-01

    Lysophosphatidic acid (LPA) is a physiological agonist that is produced by lysophospholipase D, phospholipase A(1) and phospholipase A(2) in the blood of animals. It exerts diverse biological actions on a broad range of animal cells. Specific receptors for this important agonist have been characterized. In this investigation, for the first time we prepared LPAs having a highly unsaturated fatty acyl group, such as the eicosapentaenoyl or docosahexaenoyl residue, and their acetylated derivatives. Human platelets aggregated more potently in response to the highly unsaturated acyl-LPAs than to LPAs with a C(18) fatty acyl group, such as an oleoyl group, while alkyl ether-linked LPAs (alkyl-LPA) had much stronger aggregating activity. Two positional isomers of LPAs with an arachidonoyl, eicosapentaenoyl or docosahexaenoyl group had equipotent aggregatory activity as well as the positional isomers of their acetylated analogues, indicating that putative LPA receptors could not distinguish the difference between the positional isomers. We found that platelet preparations from two individuals showed no aggregatory response to alkyl-LPAs, although they contained mRNAs for known LPA receptors in the following order of expression level: endothelial differentiation gene (Edg)-4>Edg-7>Edg-2. We also obtained evidence that 2-(p-amylcinnamoyl)amino-4-chlorobenzoic acid (ONO-RS-082), a phospholipase A(2) inhibitor, potentiated alkyl-LPA-induced platelet aggregation, but inhibited highly unsaturated acyl-LPA-induced platelet aggregation. These results indicated that human platelets express acyl-LPA-selective and alkyl-LPA-selective receptors on their plasma membrane. PMID:11982483

  17. Radical Reactions of Alkyl 2-Bromo-2,2-difluoroacetates with Vinyl Ethers: "Omitted" Examples and Application for the Synthesis of 3,3-Difluoro-GABA.

    PubMed

    Kondratov, Ivan S; Bugera, Maksym Ya; Tolmachova, Nataliya A; Posternak, Ganna G; Daniliuc, Constantin G; Haufe, Günter

    2015-12-18

    Addition reactions of perfluoroalkyl radicals to ordinary or polyfluorinated alkenes have been frequently used to synthesize perfluoroalkylated organic compounds. Here ethyl/methyl 2-bromo-2,2-difluoroacetate, diethyl (bromodifluoromethyl)phosphonate, [(bromodifluoromethyl)sulfonyl]benzene, and ethyl 2-bromo-2-fluoroacetate were involved in Na2S2O4-mediated radical additions to vinyl ethers in the presence of alcohols to give difluoro or monofluoroacetyl-substituted acetals or corresponding difluoromethylphosphonate- and (difluoromethylphenyl)sulfonyl-substituted alkyl acetals. This methodology has also been applied as a key step in the synthesis of hitherto unknown 3,3-difluoro-GABA, completing the series of isomeric difluoro GABAs. Comparison of the pKa values of 3-fluoro- and 3,3-difluoro-GABA with that of the fluorine free parent compound showed that introduction of each fluorine lead to acidification of both the amino and the carboxyl functions by approximately one unit. PMID:26550962

  18. Interactions of water with the nonionic surfactant polyoxyethylene glycol alkyl ethers studied by phase-sensitive sum frequency generation and molecular dynamics simulation

    NASA Astrophysics Data System (ADS)

    Mafi, Amirhossein; Hu, Dan; Chou, Keng C.

    2016-06-01

    Phase-sensitive sum frequency generation (SFG) vibrational spectroscopy and molecular dynamics (MD) simulation were used to study the interactions between water molecules and the surfactant polyoxyethylene glycol alkyl ether (C12E4) at its critical micelle concentration. The surfactant enhanced the positive peak of water's SFG spectrum suggesting that C12E4 was more anionic-like, even though the surfactant was overall neutral. MD simulations showed that the surfactant increased the depth of the surface anisotropic layer from 0.31 to 1.82 nm and the average number of hydrogen bonds per water molecule from 2.7 to 3.1. For water molecules near the surfactant, their H and O atoms are confined in well-separated shells. Both the O and C atoms in the head group of the surfactant are surrounded by the H atoms, instead of the O atoms, of water indicating that the negatively charged O atoms of the surfactant play a more important role than the C atoms in determining the orientation of water. The simulation also showed that the orientation of surface water molecules was flipped in the presence of the surfactant, which was consistent with the observed SFG spectra.

  19. Formation and cleansing performance of bicontinuous microemulsions in water/poly (oxyethylene) alkyl ether/ester-type oil systems.

    PubMed

    Aramaki, Kenji; Tawa, Kosuke; Shrestha, Lok Kumar; Iwanaga, Tetsuro; Kamada, Miho

    2013-01-01

    Phase behaviors in water/poly(oxyethylene) dodecyl ether (C₁₂EO(n), n = 4, 6, 8)/cetyl isooctanoate (CIO) systems were studied. In the C₁₂EO₆ and C₁₂EO₈ systems, self-assembled structures with positive curvatures, such as O/W microemulsions, and micellar cubic and hexagonal phases, were observed. A wider region of a lamellar liquid-crystalline phase, which included a narrow microemulsion region joined by a miscibility gap, was observed in the C₁₂EO₄ system. The structure of the microemulsion phase in the C₁₂EO₄ system was characterized by pulsed-field-gradient NMR (PFG-NMR) and small angle X-ray scattering (SAXS) techniques. PFG-NMR measurements indicated that the structure of the microemulsion was bicontinuous; both water and oil phases were continuous within the microemulsion. Pair-distance distribution function, p (r), and structure factors obtained by Generalized Indirect Fourier Transformation (GIFT) analysis of the SAXS data showed that the microemulsion domain sizes decreased with an increase in the oil content. The structure of the bicontinuous microemulsion was consistent with the results of a detergency test, in which the microemulsion samples were applied to lipstick dirt on an artificial skin plate. Detergency was observed to be better for the microemulsion at lower oil contents because of the larger oil domain size at these low concentrations. PMID:24088518

  20. Synthetic applications of aqueous accelerated [3,3] sigmatropic rearrangements of allyl vinyl ethers. [1,3] sigmatropic rearrangements of allyl vinyl ethers in 3 M lithium perchlorate-diethyl ether at ambient temperature. New methods to effect the retro Diels-Alder reaction of N-alkyl-2-azanorbornenes

    SciTech Connect

    Clark, J.D.

    1992-01-01

    Claisen rearrangements employed in the synthesis of natural and unnatural products that were heretofore difficult or impossible using conventional means are realized through the agency of water. Allyl vinyl ether 35, the unprotected form of McMurry's aphidicolin intermediate 7, rearranged after 24 h in 2.5:1 water/methanol at 80[degrees]C, affording aldehyde 40 in 70--85% yield. Acetaldehyde elimination witnessed using conventional reaction conditions was suppressed when employing water. The application of a Claisen rearrangement within the molecular framework of fenestranes was realized for the first time. Fenestrene vinyl ethers 28 and 30 rearranged to form the fenestrenes 29 and 31, respectively. Noteworthy is fenestrene 29, the first fenestrane synthesized possessing a trans-ring fusion common to two five-membered rings. The medium of 3.0 M lithium perchlorate-diethyl ether has been found to induce the rarely witnessed rearrangement of allyl vinyl ethers, despite the fact that the corresponding sigmatropic rearrangement is energetically more favorable. Yields are very good; however, in some instances the sigmatropic rearrangement and elimination processes compete slightly. Results from the observed stereoselectivities, concentration effects on reaction rate, and a crossover study indicate that these shifts take place via dissociated ions followed by recombination, and that the observed stereoselectivities are a result of unequal steric effects in the transition states for recombination. Copper(II) and sulfonic acid ion exchange resins have been found to readily catalyze the heterocycloreversion of N-alkyl-2-azanorbornenes to the corresponding primary amines, eliminating the necessity of employing a reactive dienophile to trap out the released cyclopentadiene.

  1. A Mild Synthesis of New Aryl Vinyl Ethers and Diethyl 1-[(Alkyl)(cyano)methyl]vinylphosphonates via the Substitution of a 2,3-Difunctional Allyl Bromide

    PubMed Central

    Ben Kraïem, Jihène; Arfaoui, Aïcha; Amri, Hassen

    2014-01-01

    A novel class of aryl vinyl ethers 3 and diethyl 3-cyano-3-alkylprop-1-en-2-ylphosphonates 4 has been prepared, respectively, from coupling reaction of diethyl 1-(bromomethyl)-2-cyanovinylphosphonate 2 with phenols and Gilman reagents. PMID:24688373

  2. Chemistry of enol ethers. LXXXIV. Condensation of acetals of saturated aldehydes with 2-trimethylsilyloxy-1,3-dienes. Synthesis of /beta/-alkoxy-alkyl vinyl and divinyl ketones

    SciTech Connect

    Makin, S.M.; Nazarova, O.N.; Dymshakova, G.M.; Kundryutskova, L.A.

    1988-11-10

    The addition of the acetals of saturated aldehydes (formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde, and isobutyraldehyde) to 2-trimethylsilyloxy-4-methyl-1,3-pentadiene in the presence of aprotic acids (ZnCl/sub 2/, ZnBr/sub 2/, FeCl/sub 3/, SnCl/sub 4/, BF/sub 3/ /times/ OEt/sub 2/) takes place at positions 1, 2 of the diene system with the formation of /beta/-alkoxyalkyl vinyl ketones. The most effective catalysts of this reaction were stannic chloride and zinc bromide. The alkyl derivatives of divinyl ketones are formed when the obtained /beta/-alkoxyalkyl vinyl ketones are heated with p-toluenesulfonic acid.

  3. Alkylating potential of oxetanes.

    PubMed

    Gómez-Bombarelli, Rafael; Palma, Bernardo Brito; Martins, Célia; Kranendonk, Michel; Rodrigues, Antonio S; Calle, Emilio; Rueff, José; Casado, Julio

    2010-07-19

    Small, highly strained heterocycles are archetypical alkylating agents (oxiranes, beta-lactones, aziridinium, and thiirinium ions). Oxetanes, which are tetragonal ethers, are higher homologues of oxiranes and reduced counterparts of beta-lactones, and would therefore be expected to be active alkylating agents. Oxetanes are widely used in the manufacture of polymers, especially in organic light-emitting diodes (OLEDs), and are present, as a substructure, in compounds such as the widely used antimitotic taxol. Whereas the results of animal tests suggest that trimethylene oxide (TMO), the parent compound, and beta,beta-dimethyloxetane (DMOX) are active carcinogens at the site of injection, no studies have explored the alkylating ability and genotoxicity of oxetanes. This work addresses the issue using a mixed methodology: a kinetic study of the alkylation reaction of 4-(p-nitrobenzyl)pyridine (NBP), a trap for alkylating agents with nucleophilicity similar to that of DNA bases, by three oxetanes (TMO, DMOX, and methyloxetanemethanol), and a mutagenicity, genotoxicity, and cell viability study (Salmonella microsome test, BTC E. coli test, alkaline comet assay, and MTT assay). The results suggest either that oxetanes lack genotoxic capacity or that their mode of action is very different from that of epoxides and beta-lactones. PMID:20550097

  4. Rearrangements of Cycloalkenyl Aryl Ethers.

    PubMed

    Törincsi, Mercedesz; Nagy, Melinda; Bihari, Tamás; Stirling, András; Kolonits, Pál; Novak, Lajos

    2016-01-01

    Rearrangement reactions of cycloalkenyl phenol and naphthyl ethers and the acid-catalyzed cyclization of the resulting product were investigated. Claisen rearrangement afforded 2-substituted phenol and naphthol derivatives. Combined Claisen and Cope rearrangement resulted in the formation of 4-substituted phenol and naphthol derivatives. In the case of cycloocthylphenyl ether the consecutive Claisen and Cope rearrangements were followed by an alkyl migration. The mechanism of this novel rearrangement reaction is also discussed. PMID:27104504

  5. New and extended parameterization of the thermodynamic model AIOMFAC: calculation of activity coefficients for organic-inorganic mixtures containing carboxyl, hydroxyl, carbonyl, ether, ester, alkenyl, alkyl, and aromatic functional groups

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Booth, A. M.; Lienhard, D. M.; Soonsin, V.; Krieger, U. K.; Topping, D. O.; McFiggans, G.; Peter, T.; Seinfeld, J. H.

    2011-09-01

    We present a new and considerably extended parameterization of the thermodynamic activity coefficient model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) at room temperature. AIOMFAC combines a Pitzer-like electrolyte solution model with a UNIFAC-based group-contribution approach and explicitly accounts for interactions between organic functional groups and inorganic ions. Such interactions constitute the salt-effect, may cause liquid-liquid phase separation, and affect the gas-particle partitioning of aerosols. The previous AIOMFAC version was parameterized for alkyl and hydroxyl functional groups of alcohols and polyols. With the goal to describe a wide variety of organic compounds found in atmospheric aerosols, we extend here the parameterization of AIOMFAC to include the functional groups carboxyl, hydroxyl, ketone, aldehyde, ether, ester, alkenyl, alkyl, aromatic carbon-alcohol, and aromatic hydrocarbon. Thermodynamic equilibrium data of organic-inorganic systems from the literature are critically assessed and complemented with new measurements to establish a comprehensive database. The database is used to determine simultaneously the AIOMFAC parameters describing interactions of organic functional groups with the ions H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42-. Detailed descriptions of different types of thermodynamic data, such as vapor-liquid, solid-liquid, and liquid-liquid equilibria, and their use for the model parameterization are provided. Issues regarding deficiencies of the database, types and uncertainties of experimental data, and limitations of the model, are discussed. The challenging parameter optimization problem is solved with a novel combination of powerful global minimization algorithms. A number of exemplary calculations for systems containing atmospherically relevant aerosol components are shown. Amongst others, we discuss aqueous mixtures of ammonium sulfate with

  6. New and extended parameterization of the thermodynamic model AIOMFAC: calculation of activity coefficients for organic-inorganic mixtures containing carboxyl, hydroxyl, carbonyl, ether, ester, alkenyl, alkyl, and aromatic functional groups

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Booth, A. M.; Lienhard, D. M.; Soonsin, V.; Krieger, U. K.; Topping, D. O.; McFiggans, G.; Peter, T.; Seinfeld, J. H.

    2011-05-01

    We present a new and considerably extended parameterization of the thermodynamic activity coefficient model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) at room temperature. AIOMFAC combines a Pitzer-like electrolyte solution model with a UNIFAC-based group-contribution approach and explicitly accounts for interactions between organic functional groups and inorganic ions. Such interactions constitute the salt-effect, may cause liquid-liquid phase separation, and affect the gas-particle partitioning of aerosols. The previous AIOMFAC version was parameterized for alkyl and hydroxyl functional groups of alcohols and polyols. With the goal to describe a wide variety of organic compounds found in atmospheric aerosols, we extend here the parameterization of AIOMFAC to include the functional groups carboxyl, hydroxyl, ketone, aldehyde, ether, ester, alkenyl, alkyl, aromatic carbon-alcohol, and aromatic hydrocarbon. Thermodynamic equilibrium data of organic-inorganic systems from the literature are critically assessed and complemented with new measurements to establish a comprehensive database. The database is used to determine simultaneously the AIOMFAC parameters describing interactions of organic functional groups with the ions H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42-. Detailed descriptions of different types of thermodynamic data, such as vapor-liquid, solid-liquid, and liquid-liquid equilibria, and their use for the model parameterization are provided. Issues regarding deficiencies of the database, types and uncertainties of experimental data, and limitations of the model, are discussed. The challenging parameter optimization problem is solved with a novel combination of powerful global minimization algorithms. A number of exemplary calculations for systems containing atmospherically relevant aerosol components are shown. Amongst others, we discuss aqueous mixtures of ammonium sulfate with

  7. Motor fuel alkylation process utilizing low acid

    SciTech Connect

    Kocal, J.A.; Imai, T.

    1987-01-06

    A process is described for the alkylation of an isoparaffin with an olefin acting agent comprising contacting the isoparaffin with the olefin acting agent at alkylation conditions in the presence of a catalyst. The catalyst consists essentially of an anhydrous, nonalcoholic mixture of from about 5 to 15 wt. % methyl tert-butyl ether and from 85 to 95 wt. % hydrofluoric acid. The volumetric ratio of hydrofluoric acid to isoparaffin and olefin acting agent is less than 0.75.

  8. An efficient copper-catalyzed cross-coupling reaction of alkyl-triflates with alkyl-Grignard reagents

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A highly efficient method for the formation of C-C covalent bonds by cross-coupling reaction between alkyl-triflates and alkyl-Grignard reagents catalyzed by copper catalyst, Li2CuCl4, is described. The reaction works with most primary triflates in diethyl ether at low temperature within 0.5-3 h an...

  9. Activity of organophosphorus insecticides in bacterial tests for mutagenicity and DNA repair--direct alkylation versus metabolic activation and breakdown. II. O,O-dimethyl-O-(1,2-dibromo-2,2-dichloroethyl)-phosphate and two O-ether derivatives of trichlorfon.

    PubMed

    Braun, R; Schöneich, J; Weissflog, L; Dedek, W

    1983-03-01

    The following organophosphates were tested for their ability to induce DNA damage in a rec-type repair test with Proteus mirabilis strains PG713 (rec- hcr-) and PG273 (wild-type) and point mutations in the his- strain TA100 of Salmonella typhimurium: O,O-dimethyl-O-(1,2-dibromo-2,2-dichloroethyl)-phosphate (NALED); trichlorfon-O-methyl ether (TCP-O-ME), O,O-dimethyl-(1-methoxy-2,2,2-trichlorethyl)-phosphonate; trichlorfon-O-methyl ether vinyl derivative (TCP-O-MEVD), O,O-dimethyl-(1-methoxy-2,2-dichlorovinyl)-phosphonate. All compounds were negative in the repair test but induced base pair substitutions in S. typhimurium. The mutagenicity of NALED is due to the direct alkylating ability of the parental molecule and to mutagenic metabolites generated by enzymatic splitting of the side chain. Glutathion-dependent enzymes in the S9-mix eliminate the mutagenic activity of NALED completely. Mutation induction by TCP-O-ME and TCP-O-MEVD is predominantly caused by the reactive O-methyl ether configuration of the side chain and is resistant to metabolic inactivation by NADPH- or glutathion-dependent enzymatic pathways in the S9-mix of mice. PMID:6337735

  10. Reactions of perfluoro-1-alkylcycloalkenes with alcohols and properties of vinyl ethers formed

    SciTech Connect

    Snegirev, V.F.; Makarov, K.N.

    1986-12-10

    Perfluoro-1-alkylcycloalkenes react with alcohols to form products of vinyl and allyl substitution. Alkyl perfluorocycloakenyl ethers readily alkylate the fluoride ion and triethylamine, and by the action of SbF/sub 5/ convert into ..cap alpha.., ..beta..-unsaturated perfluoro ketones. When allyl perfluorocycloalkenyl ethers are heated, they isomerize into the corresponding ..cap alpha..-allylperfluorocycloalkanones.

  11. Method for making aromatic ethers using diorganoamino pyridinium salt catalyst

    SciTech Connect

    Brunelle, D. J.; Singleton, D. A.

    1985-04-23

    A method is provided for making aromatic ethers by effecting the displacement of reactive radicals on an activated aromatic nucleus such as a phthalimide with a mono or bisalkali metal phenoxide in the presence of an organic solvent and a dialkylamino branched alkyl substituted pyridinium salt as a phase transfer catalyst. Improved yields of bis(aromatic ethers) are achieved without the production of undesirable by-products, such as alkylated phenols.

  12. Catalytic cleavage of ether C-O bonds by pincer iridium complexes.

    PubMed

    Haibach, Michael C; Lease, Nicholas; Goldman, Alan S

    2014-09-15

    The development of efficient catalytic methods to cleave the relatively unreactive C-O bonds of ethers remains an important challenge in catalysis. Building on our group's recent work, we report the dehydroaryloxylation of aryl alkyl ethers using pincer iridium catalysts. This method represents a rare fully atom-economical method for ether C-O bond cleavage. PMID:25060043

  13. Certain glycol ethers eliminated from toxic chemical release reporting requirements

    SciTech Connect

    1994-09-01

    Effective June 28, 1994, the U.S. Environmental Protection Agency (EPA) eliminated high molecular weight glycol ethers from the reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (EPCRA). EPCRA (42 U.S.C. 11023) is also referred to as Title III of the Superfund Amendments and Reauthorization Act (SARA) of 1986. EPA redefined the glycol ethers category list of chemicals subject to reporting based on an EPA review of available human health data on short-chain glycol ethers. EPA is removing only the surfactant glycol ethers, which are high molecular weight glycol ethers, i.e., those with pendant alkyl groups and that typically have eight or more carbon atoms. The redefinition retains certain glycol ethers (i.e., ethylene glycol ethers where there are 1,2, or 3 repeating ethylene oxide groups) in the category. These are reasonably anticipated to cause adverse human health effects.

  14. Catalytic alkylation apparatus

    SciTech Connect

    Hann, P.D.; VanPool, J.

    1989-09-05

    This patent describes an apparatus. It comprises alkylation reactor means for producing alkylate product; acid catalyst settler means having an upper portion, an intermediate portion and a lower portion; means for withdrawing alkylate product from the alkylation reactor means and for providing alkylate product from the alkylation reactor means to a point of introduction in the intermediate portion of the acid catalyst settler means; and means for establishing a temperature gradient in the upper the gas lines to the detector so that a flow rate of a sample gas passing through the detector is constant.

  15. Pentabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Pentabromodiphenyl ether ; CASRN 32534 - 81 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncar

  16. Hexabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Hexabromodiphenyl ether ; CASRN 36483 - 60 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  17. Ethyl ether

    Integrated Risk Information System (IRIS)

    Ethyl ether ; CASRN 60 - 29 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Effect

  18. Tetrabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Tetrabromodiphenyl ether ; CASRN 40088 - 47 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncar

  19. Nonabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Nonabromodiphenyl ether ; CASRN 63936 - 56 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  20. Tribromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Tribromodiphenyl ether ; CASRN 49690 - 94 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarci

  1. Octabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Octabromodiphenyl ether ; CASRN 32536 - 52 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  2. Alkylated lariat ethers as solvent extraction reagents: Surveying the extraction of alkali metals by bis-t-octylbenzo-14-crown-4-acetic acid by use of potentiometric two-phase titration

    SciTech Connect

    Sachleben, R.A.; Moyer, B.A.; Case, F.I.; Garmon, S.A.

    1993-01-01

    Two-phase potentiometric titrimetry was used to survey the extraction of alkali metal cations from aqueous chloride solution by the lipophilic, ionizable lariat ether bis-(t-octylbenzo)-14-crown-4-acetic acid (BOB14C4AA) in o-xylene. Analysis of the data indicates that ion-exchange extraction by the crown-carboxylic acid at low loading (i.e., low conversion of BOB14C4AA to its salt form) is stronger for lithium ion than for the other alkali metals. Little or no selectivity occurs at high loadings. In comparison with the long-chain carboxylic acid 2-methyl-2-heptylnonanoic acid (HMHN), BOB14C4AA extracts lithium and sodium at significantly lower pH; in the loading range of 0.1 to 0.7, the pH shift is 1.4-1.8 pH units for sodium ion and 1.7-2.3 pH units for lithium ion. The titration data are interpreted in terms of aggregated organic-phase species. In the case of lithium extraction, clear evidence was found for a species in which neutral BOB14C4AA participates in the organic-phase complexation of the metal cation.

  3. PROCESS FOR PRODUCING ALKYL ORTHOPHOSPHORIC ACID EXTRACTANTS

    DOEpatents

    Grinstead, R.R.

    1962-01-23

    A process is given for producing superior alkyl orthophosphoric acid extractants for use in solvent extraction methods to recover and purify various metals such as uranium and vanadium. The process comprises slurrying P/sub 2/O/ sub 5/ in a solvent diluent such as kerosene, benzene, isopropyl ether, and the like. An alipbatic alcohol having from nine to seventeen carbon atoms, and w- hcrein ihc OH group is situated inward of the terminal carbon atoms, is added to the slurry while the reaction temperature is mainiained below 60 deg C. The alcohol is added in the mole ratio of about 2 to l, alcohol to P/sub 2/O/sub 5/. A pyrophosphate reaotion product is formed in the slurry-alcohol mixture. Subsequently, the pyrophosphate reaction product is hydrolyzed with dilute mineral acid to produce the desired alkyl orthophosphoric aeid extractant. The extraetant may then be separated and utilized in metal-recovery, solvent- extraction processes. (AEC)

  4. Polygas spells relief from alkylation ills

    SciTech Connect

    Weismantel, G.E.

    1980-06-16

    Tight supplies and soaring prices of isobutane (for olefin alkylation), are causing renewed interest in the olefin ''polymerization'' (i.e., dimerization), route to high-octane gasoline-blending components. Modern polymerization processes, intended to supplement rather than replace alkylation offer considerable energy and capital savings, compared with alkylation-only schemes. In addition to the Institut Francais du Petrole's Dimersol ''polymerization'' tecnique which is already being used or will be used by 1981 in at least five U.S. refineries, with six more units in the planning stage, a low-cost process to ''polymerize'' excess refinery olefins, developed by International Energy Consultants Inc., is nearing commercialization. A third route to process C/sub 3//C/sub 4/ refinery streams with high conversion rates has been proposed by UOP Inc. The low motor octane number (MON) of the product gasoline (approx. 13 numbers lower than a typical alkylate), was recently confirmed in Total Petroleum Inc.'s studies, but Good Hope Refineries Inc. plans to increase its polymer gasoline MON by adding methyl tert.-butyl ether.

  5. A Caenorhabditis elegans model for ether lipid biosynthesis and function[S

    PubMed Central

    Shi, Xun; Tarazona, Pablo; Brock, Trisha J.; Browse, John; Feussner, Ivo; Watts, Jennifer L.

    2016-01-01

    Ether lipids are widespread in nature, and they are structurally and functionally important components of membranes. The roundworm, Caenorhabditis elegans, synthesizes numerous lipid species containing alkyl and alkenyl ether bonds. We isolated C. elegans strains carrying loss-of-function mutations in three genes encoding the proteins required for the initial three steps in the ether lipid biosynthetic pathway, FARD-1/FAR1, ACL-7/GNPAT, and ADS-1/AGPS. Analysis of the mutant strains show that they lack ether lipids, but possess the ability to alter their lipid composition in response to lack of ether lipids. We found that increases in de novo fatty acid synthesis and reduction of stearoyl- and palmitoyl-CoA desaturase activity, processes that are at least partially regulated transcriptionally, mediate the altered lipid composition in ether lipid-deficient mutants. Phenotypic analysis demonstrated the importance of ether lipids for optimal fertility, lifespan, survival at cold temperatures, and resistance to oxidative stress.Caenorhabditis PMID:26685325

  6. Safety Assessment of Alkyl PEG Sulfosuccinates as Used in Cosmetics.

    PubMed

    Johnson, Wilbur; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-09-01

    The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) reviewed the safety of alkyl polyethylene glycol (PEG) sulfosuccinates, which function in cosmetics mostly as surfactants/cleansing agents. Although these ingredients may cause ocular and skin irritation, dermal penetration is unlikely because of the substantial polarity and molecular size of these ingredients. The Panel considered the negative oral carcinogenicity and reproductive and developmental toxicity data on chemically related laureths (PEG lauryl ethers) and negative repeated dose toxicity and skin sensitization data on disodium laureth sulfosuccinate supported the safety of these alkyl PEG sulfosuccinates in cosmetic products, but. The CIR Expert Panel concluded that the alkyl PEG sulfosuccinates are safe in the present practices of use and concentration when formulated to be nonirritating. PMID:26362121

  7. Process for producing high purity isoolefins and dimers thereof by dissociation of ethers

    DOEpatents

    Smith, Jr., Lawrence A.; Jones, Jr., Edward M.; Hearn, Dennis

    1984-01-01

    Alkyl tertiary butyl ether or alkyl tertiary amyl ether is dissociated by vapor phase contact with a cation acidic exchange resin at temperatures in the range of 150.degree. to 250.degree. F. at LHSV of 0.1 to 20 to produce a stream consisting of unreacted ether, isobutene or isoamylene and an alcohol corresponding to the alkyl radical. After the alcohol is removed, the ether/isoolefin stream may be fractionated to obtain a high purity isoolefin (99+%) or the ether/isoolefin stream can be contacted in liquid phase with a cation acidic exchange resin to selectively dimerize the isoolefin in a highly exothermic reaction, followed by fractionation of the dimerization product to produce high purity diisoolefin (97+%). In the case where the alkyl is C.sub.3 to C.sub.6 and the corresponding alcohol is produced on dissociation of the ether, combined dissociation-distillation may be carried out such that isoolefin is the overhead product and alcohol the bottom.

  8. Process for producing high purity isoolefins and dimers thereof by dissociation of ethers

    DOEpatents

    Smith, L.A. Jr.; Jones, E.M. Jr.; Hearn, D.

    1984-05-08

    Alkyl tertiary butyl ether or alkyl tertiary amyl ether is dissociated by vapor phase contact with a cation acidic exchange resin at temperatures in the range of 150 to 250 F at LHSV of 0.1 to 20 to produce a stream consisting of unreacted ether, isobutene or isoamylene and an alcohol corresponding to the alkyl radical. After the alcohol is removed, the ether/isoolefin stream may be fractionated to obtain a high purity isoolefin (99+%) or the ether/isoolefin stream can be contacted in liquid phase with a cation acidic exchange resin to selectively dimerize the isoolefin in a highly exothermic reaction, followed by fractionation of the dimerization product to produce high purity diisoolefin (97+%). In the case where the alkyl is C[sub 3] to C[sub 6] and the corresponding alcohol is produced on dissociation of the ether, combined dissociation-distillation may be carried out such that isoolefin is the overhead product and alcohol the bottom. 2 figs.

  9. Synthesis of amphiphilic 6-carboxypullulan ethers.

    PubMed

    Pereira, Junia M; Mahoney, Michelle; Edgar, Kevin J

    2014-01-16

    Hydrophobically modified polysaccharides that contain carboxyl groups possess exceptional features for drug delivery and other applications. Carboxyl groups were introduced at C-6 in the pullulan backbone by applying the well-established oxidation with TEMPO and NaOCl/NaBr. The oxidized product, 6-carboxypullulan, is even more water-soluble than pullulan. Consequently, further chemical modifications have been mainly restricted to reactions that can be performed in water or under heterogeneous conditions. We find that the TBA salt of 6-carboxypullulan is soluble in a range of organic solvents and can be reacted homogeneously with various alkyl halides in DMSO and sodium hydroxide at 40 °C to yield 6-carboxypullulan ethers. Complete substitution (DS 7 per trisaccharide repeat unit) was achieved upon reaction with iodoethane, while products from reaction with longer chain alkyl halides (propyl and butyl derivatives) achieved DS up to about 3. The amphiphilic products have impressive surfactant properties. PMID:24188839

  10. Synthesis and Cytotoxicity of Silicon and Germanium Containing Pyridine Oxime O-Ethers

    PubMed Central

    Abele, Edgars; Abele, Ramona; Arsenyan, Pavel; Shestakova, Irina; Kanepe, Iveta; Antonenko, Inga; Popelis, Juris; Lukevics, Edmunds

    2003-01-01

    Silicon and germanium containing pyridine aldoxime, ketoxime and amidoxime O-ethers have been prepared using phase transfer catalytic systems oxime alkyl halide solid KOH 18-crown-6 benzene and oxime alkyl halide solid K2CO3 or Cs2CO3 18-crown-6 toluene. Cytotoxic activity of silicon and germanium containing pyridine oxime O-ethers was tested in vitro on two monolayer tumor cell lines: MG- 22A (mouse hepatoma) and HT-1080 (human fibrosarcoma). O-[3-Yriethylsilylpropyl]- and O-[3-(1-methyl- 1-silacyclopentyl)propyl] oximes of pyridine aldehydes and ketones exhibit high cytotoxicity. Presence of methyl group in the pyridine ring considerably decreased activity of amidoxime O-ethers. Oxime ethers containing two elements are essentially inactive. For 2-acetylpyridine oxime ethers the activity increases in order of alkyl substituents: Et3GeCH2CH2SiMe2CH2 < Et3SiCH2CH2CH2 < (CH2)4SiCH2CH2CH2. Cytotoxicity of ketoxime O-ethers is considerably lower in comparison with aldoxime O-ethers. PMID:18365061

  11. Poly(arylene ether)s containing pendent ethynyl groups

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Jensen, Brian J. (Inventor)

    1996-01-01

    Poly(arylene ether)s containing pendent ethynyl and substituted ethynyl groups and poly(arylene ether) copolymers containing pendent ethynyl and substituted ethynyl groups are readily prepared from bisphenols containing ethynyl and substituted ethynyl groups. The resulting polymers are cured up to 350.degree. C. to provide crosslinked poly(arylene ether)s with good solvent resistance, high strength and modulus.

  12. Thermolysis of phenethyl phenyl ether: A model of ether linkages in low rank coal

    SciTech Connect

    Britt, P.F.; Buchanan, A.C. III; Malcolm, E.A.

    1994-09-01

    Currently, an area of interest and frustration for coal chemists has been the direct liquefaction of low rank coal. Although low rank coals are more reactive than bituminous coals, they are more difficult to liquefy and offer lower liquefaction yields under conditions optimized for bituminous coals. Solomon, Serio, and co-workers have shown that: in the pyrolysis and liquefaction of low rank coals, a low temperature cross-linking reaction associated with oxygen functional groups occurs before tar evolution. A variety of pretreatments (demineralization, alkylation, and ion-exchange) have been shown to reduce these retrogressive reactions and increase tar yields, but the actual chemical reactions responsible for these processes have not been defined. In order to gain insight into the thermochemical reactions leading to cross-linking in low rank coal, we have undertaken a study of the pyrolysis of oxygen containing coal model compounds. Solid state NMR studies suggest that the alkyl aryl ether linkage may be present in modest amounts in low rank coal. Therefore, in this paper, we will investigate the thermolysis of phenethyl phenyl ether (PPE) as a model of 0-aryl ether linkages found in low rank coal, lignites, and lignin, an evolutionary precursor of coal. Our results have uncovered a new reaction channel that can account for 25% of the products formed. The impact of reaction conditions, including restricted mass transport, on this new reaction pathway and the role of oxygen functional groups in cross-linking reactions will be investigated.

  13. Synthesis of Ethers via Reaction of Carbanions and Monoperoxyacetals

    PubMed Central

    2015-01-01

    Although transfer of electrophilic alkoxyl (“RO+”) from organic peroxides to organometallics offers a complement to traditional methods for etherification, application has been limited by constraints associated with peroxide reactivity and stability. We now demonstrate that readily prepared tetrahydropyranyl monoperoxyacetals react with sp3 and sp2 organolithium and organomagnesium reagents to furnish moderate to high yields of ethers. The method is successfully applied to the synthesis of alkyl, alkenyl, aryl, heteroaryl, and cyclopropyl ethers, mixed O,O-acetals, and S,S,O-orthoesters. In contrast to reactions of dialkyl and alkyl/silyl peroxides, the displacements of monoperoxyacetals provide no evidence for alkoxy radical intermediates. At the same time, the high yields observed for transfer of primary, secondary, or tertiary alkoxides, the latter involving attack on neopentyl oxygen, are inconsistent with an SN2 mechanism. Theoretical studies suggest a mechanism involving Lewis acid promoted insertion of organometallics into the O–O bond. PMID:26560686

  14. Boost refining profits by converting surplus butadiene to valuable feedstocks for MTBE and/or alkylation

    SciTech Connect

    Nocca, J.L. ); Hennico, A.; Cosyns, J.; Torck, B. )

    1994-01-01

    Ethylene plants produce a C4 butadiene-rich cut as a by-product. Although it has been a highly valued chemical intermediate for a long time, butadiene is now in over supply due to the installation of new steam cracking plants and the growing use of naphtha, the main butadiene generator, as feedstock. In the meantime, the demand for alkylate and ethers has increased steadily to produce environmentally friendly gasoline. This paper presents processes developed by IFP to convert surplus butadiene into ethers or alkylate for gasoline production. The first process transforms the butadiene-rich stream into a butenes-rich stream, an ideal alkylation feedstock. The second process generates isobutene from the butenes stream by skeletal isomerization for MTBE production.

  15. Crown ethers in graphene

    SciTech Connect

    Guo, Junjie; Lee, Jaekwang; Contescu, Cristian I.; Gallego, Nidia C.; Pantelides, Sokrates T.; Pennycook, Stephen J.; Moyer, Bruce A.; Chisholm, Matthew F.

    2014-11-13

    Crown ethers, introduced by Pedersen1, are at their most basic level neutral rings constructed of oxygen atoms linked by two- or three-carbon chains. They have attracted special attention for their ability to selectively incorporate various atoms2 or molecules within the cavity formed by the ring3-6. This property has led to the use of crown ethers and their compounds in a wide range of chemical and biological applications7,8. However, crown ethers are typically highly flexible, frustrating efforts to rigidify them for many uses that demand higher binding affinity and selectivity9,10. In this Letter, we report atomic-resolution images of the same basic structures of the original crown ethers embedded in graphene. This arrangement constrains the crown ethers to be rigid and planar and thus uniquely suited for the many applications that crown ethers are known for. First-principles calculations show that the close similarity of the structures seen in graphene with those of crown ether molecules also extends to their selectivity towards specific metal cations depending on the ring size. Atoms (or molecules) incorporated within the crown ethers in graphene offer a simple environment that can be easily and systematically probed and modeled. Thus, we expect that this discovery will introduce a new wave of investigations and applications of chemically functionalized graphene.

  16. Crown ethers in graphene

    DOE PAGESBeta

    Guo, Junjie; Lee, Jaekwang; Contescu, Cristian I.; Gallego, Nidia C.; Pantelides, Sokrates T.; Pennycook, Stephen J.; Moyer, Bruce A.; Chisholm, Matthew F.

    2014-11-13

    Crown ethers, introduced by Pedersen1, are at their most basic level neutral rings constructed of oxygen atoms linked by two- or three-carbon chains. They have attracted special attention for their ability to selectively incorporate various atoms2 or molecules within the cavity formed by the ring3-6. This property has led to the use of crown ethers and their compounds in a wide range of chemical and biological applications7,8. However, crown ethers are typically highly flexible, frustrating efforts to rigidify them for many uses that demand higher binding affinity and selectivity9,10. In this Letter, we report atomic-resolution images of the same basicmore » structures of the original crown ethers embedded in graphene. This arrangement constrains the crown ethers to be rigid and planar and thus uniquely suited for the many applications that crown ethers are known for. First-principles calculations show that the close similarity of the structures seen in graphene with those of crown ether molecules also extends to their selectivity towards specific metal cations depending on the ring size. Atoms (or molecules) incorporated within the crown ethers in graphene offer a simple environment that can be easily and systematically probed and modeled. Thus, we expect that this discovery will introduce a new wave of investigations and applications of chemically functionalized graphene.« less

  17. Crown ethers in graphene

    NASA Astrophysics Data System (ADS)

    Guo, Junjie; Lee, Jaekwang; Contescu, Cristian I.; Gallego, Nidia C.; Pantelides, Sokrates T.; Pennycook, Stephen J.; Moyer, Bruce A.; Chisholm, Matthew F.

    2014-11-01

    Crown ethers are at their most basic level rings constructed of oxygen atoms linked by two- or three-carbon chains. They have attracted attention for their ability to selectively incorporate various atoms or molecules within the cavity formed by the ring. However, crown ethers are typically highly flexible, frustrating efforts to rigidify them for many uses that demand higher binding affinity and selectivity. Here we present atomic-resolution images of the same basic structures of the original crown ethers embedded in graphene. This arrangement constrains the crown ethers to be rigid and planar. First-principles calculations show that the close similarity of the structures should also extend to their selectivity towards specific metal cations. Crown ethers in graphene offer a simple environment that can be systematically tested and modelled. Thus, we expect that our finding will introduce a new wave of investigations and applications of chemically functionalized graphene.

  18. Method of making alkyl esters

    DOEpatents

    Elliott, Brian

    2010-09-14

    Methods of making alkyl esters are described herein. The methods are capable of using raw, unprocessed, low-cost feedstocks and waste grease. Generally, the method involves converting a glyceride source to a fatty acid composition and esterifying the fatty acid composition to make alkyl esters. In an embodiment, a method of making alkyl esters comprises providing a glyceride source. The method further comprises converting the glyceride source to a fatty acid composition comprising free fatty acids and less than about 1% glyceride by mass. Moreover, the method comprises esterifying the fatty acid composition in the presence of a solid acid catalyst at a temperature ranging firm about 70.degree. C. to about 120.degree. C. to produce alkyl esters, such that at least 85% of the free fatty acids are converted to alkyl esters. The method also incorporates the use of packed bed reactors for glyceride conversion and/or fatty acid esterification to make alkyl esters.

  19. Synthesis and Antioxidant Activity of Alkyl Nitroderivatives of Hydroxytyrosol.

    PubMed

    Gallardo, Elena; Palma-Valdés, Rocío; Sarriá, Beatriz; Gallardo, Irene; de la Cruz, José P; Bravo, Laura; Mateos, Raquel; Espartero, José L

    2016-01-01

    A series of alkyl nitrohydroxytyrosyl ether derivatives has been synthesized from free hydroxytyrosol (HT), the natural olive oil phenol, in order to increase the assortment of compounds with potential neuroprotective activity in Parkinson's disease. In this work, the antioxidant activity of these novel compounds has been evaluated using Ferric Reducing Antioxidant Power (FRAP), 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), and Oxygen Radical Scavenging Capacity (ORAC) assays compared to that of nitrohydroxytyrosol (NO₂HT) and free HT. New compounds showed variable antioxidant activity depending on the alkyl side chain length; compounds with short chains (2-4 carbon atoms) maintained or even improved the antioxidant activity compared to NO₂HT and/or HT, whereas those with longer side chains (6-8 carbon atoms) showed lower activity than NO₂HT but higher than HT. PMID:27213306

  20. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  1. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  2. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  3. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  4. 40 CFR 721.9595 - Alkyl benzene sulfonic acids and alkyl sulfates, amine salts (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl benzene sulfonic acids and alkyl... Significant New Uses for Specific Chemical Substances § 721.9595 Alkyl benzene sulfonic acids and alkyl...) The chemical substances identified generically as alkyl benzene sulfonic acids and alkyl...

  5. INTRAVENOUS ETHER ANESTHESIA

    PubMed Central

    Eger, Edmond I.; Johnson, Edward A.

    1963-01-01

    From a study of intravenous ether anesthesia, it was concluded that ether diluted to a 5 per cent solution in 5 per cent dextrose and water may be used to induce and maintain a smooth and easily controlled anesthetic state similar to that obtained with inhalation ether but without the dependence of the latter technique on ventilation. Cough and laryngospasm were absent. Adequate spontaneous respiration can be maintained with this technique. The technique is particularly useful in endoscopy during which the airway is often not available for anesthetic administration. PMID:14051486

  6. Vinyl ether silicones

    SciTech Connect

    Herzig, C.; Dauth, J.; Deubzer, B.; Weis, J.

    1995-12-01

    Siloxanes with vinyl ether groups are prepared by hydrosilylation reaction of dihydrosiloxanes with divinyl ethers in excess. Different stoichiometry, produces linear copolymers of different viscosities and double bond concentrations always with an active vinyl ether group at each chain end. Polymerisations triggered by UV light were done with mixtures of these compounds and a series of onium salts. Very fast cure is observed even with low doses at 290 nm. V.E. silicones are found to cure essentially quantitative. The comparison with other highly reactive cationic monomers revealed that compounds are among the fastest curing prepolymers in cationic chemistry.

  7. Genotoxicity of glycol ethers.

    PubMed Central

    McGregor, D B

    1984-01-01

    The genetic toxicology of glycol ethers is reviewed. Ethylene glycol monomethyl ether (EGME) and diglyme have been more extensively studied than other members of this series. Most results indicate a lack of genotoxic potential, but certain tests have yielded positive responses with certain compounds. Ethylene glycol monoethyl ether (EGEE) induced sister chromatid exchanges and chromosomal aberrations in cultured cells. Both EGME and diglyme induced mouse sperm head morphological changes, male rat weak dominant lethal mutations and marked, but reversible, loss of male rat fertility. PMID:6541999

  8. Catalytic oxidation of dimethyl ether

    DOEpatents

    Zelenay, Piotr; Wu, Gang; Johnston, Christina M.; Li, Qing

    2016-05-10

    A composition for oxidizing dimethyl ether includes an alloy supported on carbon, the alloy being of platinum, ruthenium, and palladium. A process for oxidizing dimethyl ether involves exposing dimethyl ether to a carbon-supported alloy of platinum, ruthenium, and palladium under conditions sufficient to electrochemically oxidize the dimethyl ether.

  9. Synthesis and Evaluation of Alpha-Hydroxy Ethers as Potential Biodiesel Additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Several novel alpha-hydroxy ethers were synthesized by treatment of alkyl 9,10-epoxystearates with a number of alcohols in the presence of acid catalyst in good yield from oleic acid. The low temperature behavior of each material was analyzed through cloud point (CP) and pour point (PP) determinati...

  10. Polyimides with pendant alkyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Young, P. R.

    1982-01-01

    The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

  11. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Boric acid, alkyl and substituted... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted alkyl... chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  12. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Boric acid, alkyl and substituted... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted alkyl... chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  13. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Boric acid, alkyl and substituted... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted alkyl... chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  14. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Boric acid, alkyl and substituted... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted alkyl... chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  15. 40 CFR 721.1875 - Boric acid, alkyl and substituted alkyl esters (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Boric acid, alkyl and substituted... Significant New Uses for Specific Chemical Substances § 721.1875 Boric acid, alkyl and substituted alkyl... chemical substance boric acid, alkyl and substituted alkyl esters (PMN P-86-1252) is subject to...

  16. Alkylation and acylation of cyclotriphosphazenes.

    PubMed

    Benson, Mark A; Zacchini, Stefano; Boomishankar, Ramamoorthy; Chan, Yuri; Steiner, Alexander

    2007-08-20

    Phosphazenes (RNH)6P3N3 (R = n-propyl, isobutyl, isopropyl, cyclohexyl, tert-butyl, benzyl) are readily alkylated at ring N sites by alkyl halides forming N-alkyl phosphazenium cations. Alkylation of two ring N sites occurred after prolonged heating in the presence of methyl iodide or immediately at room temperature with methyl triflate yielding N,N'-dimethyl phosphazenium dications. Geminal dichloro derivatives Cl2(RNH)4P3N3 are methylated by methyl iodide at the ring N site adjacent to both P centers carrying four RNH groups. X-ray crystal structures showed that the alkylation of ring N sites leads to substantial elongation of the associated P-N bonds. Both N-alkyl and N,N'-dialkyl phosphazenium salts form complex supramolecular networks in the solid state via NH...X interactions. Systems carrying less-bulky RNH groups show additional NH...N bonds between N-alkyl phosphazenium ions. N-Alkyl phosphazenium halides form complexes with silver ions upon treatment with silver nitrate. Depending on the steric demand of RNH substituents, either one or both of the vacant ring N sites engage in coordination to silver ions. Treatment of (RNH)6P3N3 (R = isopropyl) with acetyl chloride and benzoyl chloride, respectively, yielded N-acyl phosphazenium ions. X-ray crystal structures revealed that elongation of P-N bonds adjacent to the acylated ring N site is more pronounced than it is in the case of N-alkylated species. Salts containing N-alkyl phosphazenium ions are stable toward water and other mild nucleophiles, while N,N'-dialkyl and N-acyl phosphazenium salts are readily hydrolyzed. The reaction of (RNH)6P3N3 with bromoacetic acid led to N-alkylation at one ring N site in addition to formation of an amide via condensation of an adjacent RNH substituent with the carboxylic acid group. The resulting bromide salt contains mono cations of composition (RNH)5P3N3CH2CONR in which a CH2-C(O) unit is embedded between a ring N and an exocyclic N site of the phosphazene. PMID

  17. Bio-based alternative to the diglycidyl ether of bisphenol A with controlled materials properties.

    PubMed

    Maiorana, Anthony; Spinella, Stephen; Gross, Richard A

    2015-03-01

    A series of biobased epoxy monomers were prepared from diphenolic acid (DPA) by transforming the free acid into n-alkyl esters and the phenolic hydroxyl groups into diglycidyl ethers. NMR experiments confirmed that the diglycidyl ethers of diphenolates (DGEDP) with methyl and ethyl esters have 6 and 3 mol % of glycidyl ester. Increasing the chain length of DGEDP n-alkyl esters from methyl to n-pentyl resulted in large decreases in epoxy resin viscosity (700-to-11 Pa·s). Storage modulus of DPA epoxy resins, cured with isophorone diamine, also varied with n-alkyl ester chain length (e.g., 3300 and 2100 MPa for the methyl and n-pentyl esters). The alpha transition temperature of the cured materials showed a linear decrease from 158 to 86 °C as the ester length increases. The Young's modulus and tensile strengths were about 1150 and 40 MPa, respectively, for all the cured resins tested (including DGEBA) and varied little as a function of ester length. Degree of cure for the different epoxy resins, determined by FTIR and DSC, closely approached the theoretical maximum. The result of this work demonstrates that diglycidyl ethers of n-alkyl diphenolates represent a new family of biobased liquid epoxy resins that, when cured, have similar properties to those from DGEBA. PMID:25633466

  18. Electrophilic Metal Alkyl Chemistry in New Ligand Environments

    SciTech Connect

    Jordan, Richard F.

    2013-06-30

    The goals of this project were to design new electrophilic metal alkyl complexes and to exploit these systems in fundamental studies of olefin polymerization and other important and new catalytic reactions. A key target reaction is insertion copolymerization of olefins and polar CH2=CHX vinyl monomers such as vinyl halides and vinyl ethers. During the period covered by this report we (i) investigated the properties of ortho-alkoxy-arylphosphine ligands in Ni-based olefin polymerization catalysts, (ii) studied the synthesis of double-end-capped polyethylene using group 4 metal catalysts that contain tris-pyrazolylborate ligands, (iii) explored the ethylene insertion reactivity of group 4 metal tris-pyrazolyl-borate complexes, (iv) showed that (α-diimine)PdMe{sup +} species undergo multiple insertion of silyl vinyl ethers, (v) synthesized and explored the reactivity of base-free Ni benzyl complexes that contain ortho-phosphino-arene sulfonate ligands, (vi) established the mechanism of the reaction of vinyl chloride with (α-diimine)PdMe{sup +} catalysts, (vii) explored the role of cationic polymerization and insertion chemistry in the reactions of vinyl ethers with (α-diimine)PdMe{sup +} species, (viii) discovered a new class of self-assembled tetranuclear Pd catalysts that produce high molecular weight linear polyethylene and copolymerize ethylene and vinyl fluoride, and (ix) developed model systems that enabled investigation of cis-trans isomerization of {phosphine-sulfonate}Pd(II) complexes.

  19. Triethylene glycol monoethyl ether

    Integrated Risk Information System (IRIS)

    Triethylene glycol monoethyl ether ; CASRN 112 - 50 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  20. Triethylene glycol monobutyl ether

    Integrated Risk Information System (IRIS)

    Triethylene glycol monobutyl ether ; CASRN 143 - 22 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  1. Propylene glycol monoethyl ether

    Integrated Risk Information System (IRIS)

    Propylene glycol monoethyl ether ; CASRN 52125 - 53 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  2. p-Bromodiphenyl ether

    Integrated Risk Information System (IRIS)

    p - Bromodiphenyl ether ; CASRN 101 - 55 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcin

  3. Chloromethyl methyl ether (CMME)

    Integrated Risk Information System (IRIS)

    Chloromethyl methyl ether ( CMME ) ; CASRN 107 - 30 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  4. Synthesis and biological evaluation of arctigenin ester and ether derivatives as activators of AMPK.

    PubMed

    Shen, Sida; Zhuang, Jingjing; Chen, Yijia; Lei, Min; Chen, Jing; Shen, Xu; Hu, Lihong

    2013-07-01

    A series of new arctigenin and 9-deoxy-arctigenin derivatives bearing different ester and ether side chains at the phenolic hydroxyl positions are designed, synthesized, and evaluated for activating AMPK potency in L6 myoblasts. Initial biological evaluation indicates that some alkyl ester and phenethyl ether arctigenin derivatives display potential activities in AMPK phosphorylation improvement. Further structure-activity relationship analysis shows that arctigenin ester derivatives 3a, 3h and 9-deoxy-arctigenin phenethyl ether derivatives 6a, 6c, 6d activate AMPK more potently than arctigenin. Moreover, the 2-(3,4-dimethoxyphenyl)ethyl ether moiety of 6c has been demonstrated as a potential functional group to improve the effect of AMPK phosphorylation. The structural optimization of arctigenin leads to the identification of 6c as a promising lead compound that exhibits excellent activity in AMPK activation. PMID:23673223

  5. Mild Catalytic methods for Alkyl-Alkyl Bond Formation

    SciTech Connect

    Vicic, David A

    2009-08-10

    Overview of Research Goals and Accomplishments for the Period 07/01/06 – 06/30/07: Our overall research goal is to transform the rapidly emerging synthetic chemistry involving alkyl-alkyl cross-couplings into more of a mechanism-based field so that that new, rationally-designed catalysts can be performed under energy efficient conditions. Our specific objectives for the previous year were 1) to obtain a proper electronic description of an active catalyst for alkyl-alkyl cross-coupling reactions and 2) to determine the effect of ligand structure on the rate, scope, selectivity, and functional group compatibility of C(sp3)-C(sp3) cross-coupling catalysis. We have completed both of these initial objectives and established a firm base for further studies. The specific significant achievements of the current grant period include: 1) we have performed magnetic and computational studies on (terpyridine)NiMe, an active catalyst for alkyl-alkyl cross couplings, and have discovered that the unpaired electron resides heavily on the terpyridine ligand and that the proper electronic description of this nickel complex is a Ni(II)-methyl cation bound to a reduced terpyridine ligand; 2) we have for the first time shown that alkyl halide reduction by terpyridyl nickel catalysts is substantially ligand based; 3) we have shown by isotopic labeling studies that the active catalyst (terpyridine)NiMe is not produced via a mechanism that involves the formation of methyl radicals when (TMEDA)NiMe2 is used as the catalyst precursor; 4) we have performed an extensive ligand survey for the alkyl-alkyl cross-coupling reactions and have found that electronic factors only moderately influence reactivity in the terpyridine-based catalysis and that the most dramatic effects arise from steric and solubility factors; 5) we have found that the use of bis(dialkylphosphino)methanes as ligands for nickel does not produce active catalysts for cross-coupling but rather leads to bridging hydride

  6. Intermolecular Photocatalyzed Heck-like Coupling of Unactivated Alkyl Bromides by a Dinuclear Gold Complex.

    PubMed

    Xie, Jin; Li, Jian; Weingand, Vanessa; Rudolph, Matthias; Hashmi, A Stephen K

    2016-08-26

    A practical protocol for a photocatalyzed alkyl-Heck-like reaction of unactivated alkyl bromides and different alkenes promoted by dinuclear gold photoredox catalysis in the presence of an inorganic base is reported. Primary, secondary, and tertiary unactivated alkyl bromides with β-hydrogen can be applied. Esters, aldehydes, ketones, nitriles, alcohols, heterocycles, alkynes, alkenes, ethers, and halogen moieties are all well tolerated. In addition to 1,1-diarylalkenes, silylenolethers and enamides can also be applied, which further increases the synthetic potential of the reaction. The mild reaction conditions, broad substrate scope, and an excellent functional-group tolerance deliver an ideal tool for synthetic chemists that can even be used for challenging late-stage modifications of complex natural products. PMID:27348503

  7. Propenyl ether monomers for photopolymerization

    DOEpatents

    Crivello, J.V.

    1996-10-22

    Propenyl ether monomers of formula A(OCH{double_bond}CHCH{sub 3}){sub n} wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of the above formula together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  8. Propenyl ether monomers for photopolymerization

    DOEpatents

    Crivello, James V.

    1996-01-01

    Propenyl ether monomers of formula V A(OCH.dbd.CHCH.sub.3).sub.n wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  9. Synthesis and Characterization of bis(Tetrahydrofurfuryl) Ether.

    PubMed

    Stenger-Smith, John D; Baldwin, Lawrence; Chafin, Andrew; Goodman, Paul A

    2016-08-01

    Despite the availability of a large number of alkyl tetrahydrofurfuryl ethers that have a wide range of applications, pure bis(tetrahydrofurfuryl) ether (BTHFE) has not been previously synthesized. Here, we report the synthesis of BTHFE (consisting of the RR, SS, and meso stereoisomers) at greater than 99 % purity from tetrahydrofurfuryl alcohol, using (tetrahydrofuran-2-yl)methyl methanesulfonate as an intermediate. Additionally, we demonstrate that BTHFE can be used as a non-volatile solvent in poly(3,4-propylenedioxythiophene)-based supercapacitors. Supercapacitor devices employing solutions of the ionic liquid 1-ethyl-3-methyl-imidizolium bis(trifluoromethylsulfonyl)imide in BTHFE display similar performances to those prepared by using the neat ionic liquid as an electrolyte, although solution-based devices exhibit a somewhat higher resistance. PMID:27547636

  10. Synthesis and Characterization of bis(Tetrahydrofurfuryl) Ether

    PubMed Central

    Stenger‐Smith, John D.; Baldwin, Lawrence; Chafin, Andrew

    2016-01-01

    Abstract Despite the availability of a large number of alkyl tetrahydrofurfuryl ethers that have a wide range of applications, pure bis(tetrahydrofurfuryl) ether (BTHFE) has not been previously synthesized. Here, we report the synthesis of BTHFE (consisting of the RR, SS, and meso stereoisomers) at greater than 99 % purity from tetrahydrofurfuryl alcohol, using (tetrahydrofuran‐2‐yl)methyl methanesulfonate as an intermediate. Additionally, we demonstrate that BTHFE can be used as a non‐volatile solvent in poly(3,4‐propylenedioxythiophene)‐based supercapacitors. Supercapacitor devices employing solutions of the ionic liquid 1‐ethyl‐3‐methyl‐imidizolium bis(trifluoromethylsulfonyl)imide in BTHFE display similar performances to those prepared by using the neat ionic liquid as an electrolyte, although solution‐based devices exhibit a somewhat higher resistance. PMID:27547636

  11. Catalytic Dealkylation of Ethers to Alcohols on Metal Surfaces.

    PubMed

    Yang, Biao; Lin, Haiping; Miao, Kangjian; Zhu, Pan; Liang, Liangbo; Sun, Kewei; Zhang, Haiming; Fan, Jian; Meunier, Vincent; Li, Youyong; Li, Qing; Chi, Lifeng

    2016-08-16

    On-surface synthesis has prompted much interest in recent years because it provides an alternative strategy for controlling chemical reactions and allows for the direct observation of reaction pathways. Herein, we combined scanning tunneling microscopy and density functional theory to provide extensive evidence for the conversion of alkoxybenzene-containing ethers into alcohols by means of surface synthesis. The reported dealkylation reactions are finely controlled by the annealing parameters, which govern the onset of successive alkyl chains dissociations. Moreover, density functional theory calculations elucidate the details of the reaction pathways, showing that dealkylation reactions are surface-assisted and very different from their homogeneous analogues in solution. PMID:27432690

  12. Glycol Ethers As Groundwater Contaminants

    NASA Astrophysics Data System (ADS)

    Ross, Benjamin; Johannson, Gunnar; Foster, Gregory D.; Eckel, William P.

    1992-01-01

    Ether derivatives of dihydroxy alcohols, which are formed from ethylene or propylene, comprise an important group of groundwater contaminants known as glycol ethers. Compounds in this group are used as solvents, cleaning agents, and emulsifiers in many chemical products and manufacturing operations. Glycol ethers have been associated with a variety of toxic effects, and some compounds in the group are relatively potent teratogens. The limited information available suggests that glycol ethers are contaminants in groundwater, especially in anaerobic plumes emanating from disposal of mixed industrial and household waste. Most methods used to analyze groundwater samples cannot adequately detect μg/? (ppb) concentrations of glycol ethers, and the existing methods perform worst for the most widely used and toxic species. A new method capable of analyzing μg/? concentrations of glycol ethers was recently developed, and its use is recommended for groundwater samples where glycol ethers are likely to be present.

  13. Selective, nickel-catalyzed hydrogenolysis of aryl ethers.

    PubMed

    Sergeev, Alexey G; Hartwig, John F

    2011-04-22

    Selective hydrogenolysis of the aromatic carbon-oxygen (C-O) bonds in aryl ethers is an unsolved synthetic problem important for the generation of fuels and chemical feedstocks from biomass and for the liquefaction of coal. Currently, the hydrogenolysis of aromatic C-O bonds requires heterogeneous catalysts that operate at high temperature and pressure and lead to a mixture of products from competing hydrogenolysis of aliphatic C-O bonds and hydrogenation of the arene. Here, we report hydrogenolyses of aromatic C-O bonds in alkyl aryl and diaryl ethers that form exclusively arenes and alcohols. This process is catalyzed by a soluble nickel carbene complex under just 1 bar of hydrogen at temperatures of 80 to 120°C; the relative reactivity of ether substrates scale as Ar-OAr>Ar-OMe>ArCH(2)-OMe (Ar, Aryl; Me, Methyl). Hydrogenolysis of lignin model compounds highlights the potential of this approach for the conversion of refractory aryl ether biopolymers to hydrocarbons. PMID:21512027

  14. Alkylation of toluene with ethanol

    SciTech Connect

    Walendziewski, J.; Trawczynski, J.

    1996-10-01

    A series of Y and ZSM-5 zeolite based catalysts was prepared. Zeolites were cation exchanged and formed with 50% of aluminum hydroxide as a binder, and the obtained catalysts were finally thermally treated. Activity tests in alkylation of toluene with ethanol were carried out in the temperature range of 325--400 C, in nitrogen or hydrogen stream, and a pressure up to 3 MPa. The feed consisted of toluene and ethanol mixed in a mole ratio 1/1 or 2/1. The obtained results showed that among the studied catalysts the highest activity in the alkylation reaction was attained by ZSM-5 zeolite based catalyst with a moderate acidity and medium silica to alumina ratio, i.e., {approximately}50. Activity and selectivity of the most active catalyst as well as conversion of the feed components were similar to those reported in other papers. The content of p-ethyltoluene in alkylation products attained ca. 60%.

  15. A biological source of oceanic alkyl nitrates

    NASA Astrophysics Data System (ADS)

    Dahl, E. E.; Lewis, C. B.; Velasco, F. L.; Escobar, C.; Kellogg, D.; Velcamp, M.

    2013-12-01

    Alkyl nitrates are an important component of reactive nitrogen in the troposphere. The oceans are a source of alkyl nitrates to the atmosphere, however the source of alkyl nitrates in the oceans is unknown. It has been demonstrated that the reaction of alkyl peroxy radicals (ROO) with nitric oxide (NO) produces alkyl nitrates in the aqueous phase. We hypothesize that alkyl nitrates may be formed by organisms through the same reaction and therefore biological production could be a source of alkyl nitrates to the troposphere. This work focuses on the production of alkyl nitrates by the diatoms Chaetoceros muelleri and Thalassiosira weisfloggi. Using chemostats, we measure alkyl nitrates formed under nitrate limited conditions. We also use triggers and inhibitors of nitric oxide formation to determine if alkyl nitrate formation is affected by changes in NO production. To date, the rates of production of alkyl nitrates in our cultures, lead us to estimate a production rate on the order of femtomolar/day for C1-C3 alkyl nitrates by diatom species in the equatorial Pacific Ocean. This suggests that diatoms may contribute to the overall ocean source of alkyl nitrates; however, it is possible that other types of phytoplankton, such as cyanobacteria, that are more abundant in the open ocean, may contribute to a greater extent.

  16. Phosphine-alkene ligand-mediated alkyl-alkyl and alkyl-halide elimination processes from palladium(II).

    PubMed

    Tuxworth, Luke; Baiget, Lise; Phanopoulos, Andreas; Metters, Owen J; Batsanov, Andrei S; Fox, Mark A; Howard, Judith A K; Dyer, Philip W

    2012-10-28

    N-Diphenylphosphino-7-aza-benzobicyclo[2.2.1]hept-2-ene (2) behaves as a chelating phosphine-alkene ligand for Pd(0) and Pd(II), promoting direct alkyl-alkyl and indirect alkyl-halide reductive elimination reactions due to the stabilisation of the resulting bis(phosphine-alkene)Pd(0) complex. PMID:22986447

  17. Bacterial degradation of glycol ethers.

    PubMed

    Kawai, F

    1995-12-01

    Assimilation of ethyleneglycol (EG) ethers by polyethyleneglycol-utilizing bacteria was examined. Ethyleneglycol ether-utilizing bacteria were also isolated from soil and activated sludge samples by enrichment-culture techniques. Three strains (4-5-3, EC 1-2-1 and MC 2-2-1) were selected and characterized as Pseudomonas sp. 4-5-3, Xanthobacter autotrophicus, and an unidentified gram-negative, non-spore-forming rod respectively. Their growth characteristics were examined: Pseudomonas sp. 4-5-3 assimilated EG (diethyleneglycol, DEG) monomethyl, monoethyl and monobutyl ethers, DEG, propanol and butanol. X. autotrophicus EC 1-2-1 grew well on EG monoethyl and monobutyl ethers, EG and primary alcohols (C1-C4), and slightly on EG monomethyl ether. The strain MC 2-2-1 grew on EG monomethyl ether, EG, primary alcohols (C1-C4), and 1,2-propyleneglycol (PG). The mixed culture of Pseudomonas sp. 4-5-3 and X. autotrophicus EC 1-2-1 showed better growth and improved degradation than respective single cultures towards EG monomethyl, monoethyl or monobutyl ethers. Intact cells of Pseudomonas sp. 4-5-3 degraded various kinds of monoalkyl ethers, which cannot be assimilated by the strain. Metabolic products were characterized from reaction supernatants of intact cells of Pseudomonas sp. 4-5-3 with EG or DEG monoethyl ethers: they were analyzed by thin-layer chromatography and GC-MS and found to be ethoxyacetic acid and ethoxyglycoxyacetic acid. Also, PG monoalkyl ethers (C1-C4), dipropyleneglycol monoethyl and monomethyl ethers and tripropyleneglycol monomethyl ether were assimilated by polypropyleneglycol-utilizing Corynebacterium sp. 7. PMID:8597556

  18. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  19. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  20. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  1. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  2. 40 CFR 721.9892 - Alkylated urea.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkylated urea. 721.9892 Section 721... Alkylated urea. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an alkylated urea (PMN P-93-1649) is subject to reporting under...

  3. Macrocyclic polyenynes: a stereoselective route to vinyl-ether-containing skipped diene systems.

    PubMed

    Ronson, Thomas O; Voelkel, Martin H H; Taylor, Richard J K; Fairlamb, Ian J S

    2015-05-11

    The stereoselective synthesis of a challenging macrocyclic polyene scaffold, containing a sensitive vinyl ether motif, has been accomplished using O,C-dilithiation/selective C-alkylation, Pd-catalysed etherification and Wittig reactions as key steps. An end-game macrocyclisation strategy employed a regio- and stereoselective Stille cross-coupling using Pd(Br)(N-Succ)(AsPh3)2 (AsCat) as the precatalyst. PMID:25891970

  4. Poly(arylene ether)s That Resist Atomic Oxygen

    NASA Technical Reports Server (NTRS)

    Connell, John W.; Hergenrother, Paul; Smith, Joseph G., Jr.

    1994-01-01

    Novel poly(arylene ether)s containing phosphine oxide (PAEPO's) made via aromatic nucleophilic displacement reactions of activated aromatic dihalides (or, in some cases, activated aromatic dinitro compounds) with new bisphenol monomers containing phosphine oxide. Exhibited favorable combination of physical and mechanical properties and resistance to monatomic oxygen in oxygen plasma environment. Useful as adhesives, coatings, films, membranes, moldings, and composite matrices.

  5. Ether and Relativity

    NASA Astrophysics Data System (ADS)

    Farhoudi, Mehrdad; Yousefian, Maysam

    2016-05-01

    We consider one of the fundamental debates in performing the relativity theory, namely, the ether and the relativity points of view, in a way to aid the learning of the subjects. In addition, we present our views and prospects while describing the issues that being accessible to many physicists and allowing broader views. Also, we very briefly review the two almost recent observations of the Webb redshift and the ultra high energy cosmic rays, and the modified relativity models that have been presented to justify them, wherein we express that these justifications have not been performed via a single model with a single mechanism.

  6. Allene ether Nazarov cyclization.

    PubMed

    Tius, Marcus A

    2014-05-01

    The ease of synthesis and the exceptional reactivity of alkoxyallenes has led to their use in a large number of highly diverse applications. This Report describes their use in various versions of the allene ether Nazarov cyclization. Following a brief introduction to the Nazarov cyclization (Section 1), the oxidative cyclization of vinyl alkoxyallenes is discussed first (Section 2). Nazarov cyclizations of α-alkoxyallenyl vinyl ketones and of α-alkoxyallenyl vinyl tertiary carbinols are covered (Section 3). The discovery and the subsequent rational design of acetals that serve as chiral auxiliaries on the allene in highly enantioselective Nazarov cyclizations is explained (Section 4). Interrupted Nazarov cyclizations of alkoxyallenes that are generated in situ from the isomerization of propargyl ethers on solid supports are discussed, including the evolution of a highly diastereoselective, chiral auxiliary controlled version of the reaction. Some applications of the methodology to natural products total synthesis have been included so as to provide the reader with benchmarks with which to judge the utility of the methodology. PMID:24196585

  7. Methods of making alkyl esters

    DOEpatents

    Elliott, Brian

    2010-08-03

    A method comprising contacting an alcohol, a feed comprising one or more glycerides and equal to or greater than 2 wt % of one or more free fatty acids, and a solid acid catalyst, a nanostructured polymer catalyst, or a sulfated zirconia catalyst in one or more reactors, and recovering from the one or more reactors an effluent comprising equal to or greater than about 75 wt % alkyl ester and equal to or less than about 5 wt % glyceride.

  8. PREPARATION OF ALKYL PYROPHOSPHATE EXTRACTANTS

    DOEpatents

    Levine, C.A.; Skiens, W.E.; Moore, G.R.

    1960-08-01

    A process for providing superior solvent extractants for metal recovery processes is given wherein the extractant comprises an alkyl pyrophosphoric acid ester dissolved in an organic solvent diluent. Finely divided solid P/sub 2/O/ sub 5/ is slurried in an organic solvent-diluent selected from organic solvents such as kerosene, benzene, chlorobenzene, toluene, etc. An alcohol selected from the higher alcohols having 4 to 17 carbon atoms. e.g.. hexanol-1. heptanol-3, octanol-1. 2.6-dimethyl-heptanol-4, and decanol-1, is rapidly added to the P/sub 2/O/sub 5/ slurry in the amount of about 2 moles of alcohol to 1 mole of P/sub 2/ O/sub 5/. The temperature is maintained below about 110 deg C during the course of the P/sub 2/O/sub 5/-alcohol reaction. An alkyl pyrophosphate extractant compound is formed as a consequence of the reaction process. The alkyl pyrophosphate solvent-diluent extractant phase is useful in solvent extraction metal recovery processes.

  9. The millimeter and submillimeter wave spectrum of cis-methyl vinyl ether

    NASA Astrophysics Data System (ADS)

    Daly, A. M.; Kolesniková, L.; Mata, S.; Alonso, J. L.

    2014-12-01

    Among the species of potential interstellar relevance, methyl vinyl ether (CH3OCHdbnd CH2) is the simplest ether compound containing both alkyl and alkene functional groups. In order to facilitate its detection in the ISM, we have measured the millimeter and submillimeter wave spectra from 50 to 650 GHz. We present the analysis of pure rotational spectrum of the cis-methyl vinyl ether in the vibrational ground state and in the first excited states of in-plane bending mode (ν16) and methyl (ν23) and skeletal (ν24) torsional modes. Coriolis and Fermi type interactions between the v24 = 1 and v23 = 1 states have been explicitly treated using an effective two-state Hamiltonian.

  10. Precursor of ether phospholipids is synthesized by a flavoenzyme through covalent catalysis

    PubMed Central

    Nenci, Simone; Piano, Valentina; Rosati, Sara; Aliverti, Alessandro; Pandini, Vittorio; Fraaije, Marco W.; Heck, Albert J. R.; Edmondson, Dale E.; Mattevi, Andrea

    2012-01-01

    The precursor of the essential ether phospholipids is synthesized by a peroxisomal enzyme that uses a flavin cofactor to catalyze a reaction that does not alter the redox state of the substrates. The enzyme crystal structure reveals a V-shaped active site with a narrow constriction in front of the prosthetic group. Mutations causing inborn ether phospholipid deficiency, a very severe genetic disease, target residues that are part of the catalytic center. Biochemical analysis using substrate and flavin analogs, absorbance spectroscopy, mutagenesis, and mass spectrometry provide compelling evidence supporting an unusual mechanism of covalent catalysis. The flavin functions as a chemical trap that promotes exchange of an acyl with an alkyl group, generating the characteristic ether bond. Structural comparisons show that the covalent versus noncovalent mechanistic distinction in flavoenzyme catalysis and evolution relies on subtle factors rather than on gross modifications of the cofactor environment. PMID:23112191

  11. 75 FR 50926 - 2-propenoic acid, 2-methyl-, C12-16-alkyl esters, telomers with 1-dodecanethiol, polyethylene...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-18

    ...This regulation establishes an exemption from the requirement of a tolerance for residues of 2-propenoic acid, 2-methyl-, C12-16- alkyl esters, telomers with 1-dodecanethiol, polyethylene-polypropylene glycol ether with propylene glycol monomethacrylate (1:1), and styrene 2,2'-(1,2-diazenediyl)bis[2-methylbutanenitrile]-initiated, number average molecular weight (in AMU) 4000; when used as an......

  12. Gasoline range ether synthesis from light naphtha products of fluid catalytic cracking of Fischer-Tropsch wax

    SciTech Connect

    Reagan, W.J.

    1994-12-31

    The Fluid Catalytic Cracking of Fischer-Tropsch wax (C{sub 20}{sup +} paraffins) produces two to four time the concentration of reactive iso-olefins (isobutylene, isoamylenes, isohexenes) than observed from conventional gas oil feedstocks. Methanol reacts with these olefins to form the corresponding tertiary alkyl ethyl ethers: MTBE, TAME and MTHE`s. These etherification reactions are mildly exothermic and equilibrium limited. The reaction temperature and the olefin molecular structure are important variables for maximum ether yields. The base naphtha research octane number increases by 2-4 numbers after the etherification reaction. The presence of hydrogen has a detrimental affect on ether yields because of hydrogenation of reactive olefins to paraffins. The catalytic cracking of Fischer-Tropsch wax provides a non-conventional source of olefins for ether synthesis that can supplement existing and dwindling petroleum supplies.

  13. Functionalization of poly(aryl ether ether ketone)

    SciTech Connect

    Wang, Fei; Roovers, J.

    1993-12-31

    Bromomethyl and dibromomethyl substituted poly(aryl ether ether ketone) have been prepared from methyl poly(aryl ether ether ketone) by bromination with bromine. These brominated polymers are intermediates that can be further functionalized by: hydrolysis, oxidation, substitution etc. A series of new functionalized PEEK polymers has been prepared. The functional group includes -CH{sub 2}OH, -CH{sub 2}OCH{sub 3}, -CHO, -COOH, -COOCH{sub 3}, -CH{sub 2}CN, -CH{sub 2}COOH, -CH{sub 2}OCOCH{sub 3}, -CH{sub 2}N{sup +}H(CH{sub 2}CH{sub 3}){sub 2}Br{sup {minus}}, -CH{sub 2}N(CH{sub 2}CH{sub 3}){sub 2}, -CH{sub 2}N{sup +}H(CH{sub 2}CH{sub 3}){sub 3}Br{sup {minus}}.

  14. Polyarylene Ethers with Improved Properties

    NASA Technical Reports Server (NTRS)

    Hergenrother, P. M. (Inventor); Jensen, B. J. (Inventor); Havens, S. J. (Inventor)

    1986-01-01

    This invention relates to novel polyarylene ethers which possess the combination of high strength, toughness, and high use temperature with ease of extrusion and formation into complex objects. These polyarylene ethers are suitable for use in adhesives, coatings, films, membranes, and composite matrices. The polyarylene ethers of this invention are the polycondensation products from the reaction of either 1,3-bis (4-chloro or fluorobenzoyl) benzene with any one of the following bisphenolic compounds: bis (3-hydroxyphenyl) methane; bis (4-hydroxyphenyl) methane; 1,1-dimethyl-bis (4-hydroxyphenyl)methane, or 9,9-bis (4-hydroxyphenyl) fluorene. Random and block copolymers are also comprehended.

  15. Imide/Arylene Ether Copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Hergenrother, Paul M.; Bass, Robert G.

    1991-01-01

    New imide/arylene ether copolymers prepared by reacting anhydride-terminated poly(amic acids) with amine-terminated poly(arylene ethers) in polar aprotic solvents. Each resulting copolymer may have one glass-transition temperature or two, depending on chemical structure and/or compatibility of block units. Most of copolymers form tough, solvent-resistant films with high tensile properties. Films cast from solution tough and flexible, and exhibit useful thermal and mechanical properties. Potentially useful as moldings, adhesives, or composite matrices. Because of flexible arylene ether blocks, these copolymers easier to process than polyimides.

  16. An ether-functionalised cyclic sulfonium based ionic liquid as an electrolyte for electrochemical double layer capacitors

    NASA Astrophysics Data System (ADS)

    Neale, Alex R.; Murphy, Sinead; Goodrich, Peter; Schütter, Christoph; Hardacre, Christopher; Passerini, Stefano; Balducci, Andrea; Jacquemin, Johan

    2016-09-01

    A novel cyclic sulfonium cation-based ionic liquid (IL) with an ether-group appendage and the bis{(trifluoromethyl)sulfonyl}imide anion was synthesised and developed for electrochemical double layer capacitor (EDLC) testing. The synthesis and chemical-physical characterisation of the ether-group containing IL is reported in parallel with a similarly sized alkyl-functionalised sulfonium IL. Results of the chemical-physical measurements demonstrate how important transport properties, i.e. viscosity and conductivity, can be promoted through the introduction of the ether-functionality without impeding thermal, chemical or electrochemical stability of the IL. Although the apparent transport properties are improved relative to the alkyl-functionalised analogue, the ether-functionalised sulfonium cation-based IL exhibits moderately high viscosity, and poorer conductivity, when compared to traditional EDLC electrolytes based on organic solvents (propylene carbonate and acetonitrile). Electrochemical testing of the ether-functionalised sulfonium IL was conducted using activated carbon composite electrodes to inspect the performance of the IL as a solvent-free electrolyte for EDLC application. Good cycling stability was achieved over the studied range and the performance was comparable to other solvent-free, IL-based EDLC systems. Nevertheless, limitations of the attainable performance are primarily the result of sluggish transport properties and a restricted operative voltage of the IL, thus highlighting key aspects of this field which require further attention.

  17. Tetrabutylammonium decatungstate-photosensitized alkylation of electrophilic alkenes: Convenient functionalization of aliphatic C-H bonds.

    PubMed

    Dondi, Daniele; Fagnoni, Maurizio; Albini, Angelo

    2006-05-15

    Tetrabutylammonium decatungstate (TBADT, 2 x 10(-3) m) is an effective photocatalyst for the alkylation of electrophilic alkenes (0.1 m, alpha,beta-unsaturated nitriles, esters, ketones) by alkanes, alcohols, and ethers. The products are in most cases obtained in >70 % isolated yields, through an experimentally very simple procedure. The kinetics of the radical processes following initial hydrogen abstraction by excited TBADT in deoxygenated MeCN have been studied. In the absence of a trap, back hydrogen transfer from reduced tungstate is the main pathway for alkyl radicals, while alpha-hydroxyalkyl radicals are oxidized to ketones by ground-state TBADT. With both radical types the reaction ceases at a few percent conversion. However, trapping by electrophilic alkenes is followed by reduction of the radical adduct and regeneration of the catalyst, which allows the alkylation to proceed up to complete alkene conversion with the mentioned good yields of products. With a nucleophilic (alpha-hydroxyalkyl) radical, alkylation is efficient (Phi = 0.58) and can also be carried out when degassing is omitted, the only difference being a short induction period. With a less reactive (cyclohexyl) radical, the quantum yield is lower (Phi = 0.06) and the reaction is considerably slowed in aerated solutions, but the chemical yield remains good. PMID:16521134

  18. Masked N-Heterocyclic Carbene-Catalyzed Alkylation of Phenols with Organic Carbonates.

    PubMed

    Lui, Matthew Y; Yuen, Alexander K L; Masters, Anthony F; Maschmeyer, Thomas

    2016-09-01

    An easily prepared masked N-heterocyclic carbene, 1,3-dimethylimidazolium-2-carboxylate (DMI-CO2 ), was investigated as a "green" and inexpensive organocatalyst for the alkylation of phenols. The process made use of various low-toxicity and renewable alkylating agents, such as dimethyl- and diethyl carbonate, in a focused microwave reactor. DMI-CO2 was found to be a very active catalyst and excellent yields of a range of aryl alkyl ethers were obtained under relatively benign conditions. The observed difference in the conversion behavior of phenol methylation, in the presence of either the carbene or 1,8-diazabicycloundec-7-ene (DBU) catalyst, was rationalized on the basis of mechanistic investigations. The primary mode of action for the N-heterocyclic carbene is nucleophilic catalysis. Activation of the dialkyl carbonate electrophile results in concomitant evolution of an organo-soluble alkoxide, which deprotonates the phenolic starting material. In contrast, DBU is initially protonated by the phenol and thus consumed. Subsequent regeneration and participation in nucleophilic catalysis only becomes significant after some phenolate alkylation occurs. PMID:27528488

  19. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  20. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  1. 40 CFR 721.8673 - [(Disubstituted phenyl)]azo dihydro hydroxy alkyl oxo alkyl-substituted-pyridines (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false azo dihydro hydroxy alkyl oxo alkyl... Significant New Uses for Specific Chemical Substances § 721.8673 azo dihydro hydroxy alkyl oxo alkyl...) The chemical substances identified generically as azo dihydro hydroxy alkyl oxo...

  2. Imide/arylene ether copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor); Bass, Robert G. (Inventor)

    1992-01-01

    Imide/arylene ether block copolymers are prepared by reacting anhydride terminated poly(amic acids) with amine terminated poly(arylene ethers) in polar aprotic solvents and by chemically or thermally cyclodehydrating the resulting intermediate poly(amic acids). The resulting block copolymers have one glass transition temperature or two, depending upon the particular structure and/or the compatibility of the block units. Most of these block copolymers form tough, solvent resistant films with high tensile properties.

  3. Semi-empirical method for calculating the activation energies of the unimolecular thermal decomposition of vinyl ethers

    NASA Astrophysics Data System (ADS)

    Sargsyan, G. N.; Shakhrokh, B.; Harutyunyan, A. B.

    2015-02-01

    A semi-empirical method is proposed for calculating the activation energy of the unimolecular decomposition of complex compounds using the example of vinyl (ethyl, propyl, and butyl) ethers. The method is based on the concept of the formation of intramolecular hydrogen bonds and the possibility of calculating the energy of deformation of ether molecules upon activation, resulting in the potential surface of the transition state undergoing distortion and the transfer of a hydrogen atom from an alkyl group to a vinyl group. The energy of deformation is calculated using the Mathcad 2001i and MM2 computer programs.

  4. Space, Time, Ether, and Kant

    NASA Astrophysics Data System (ADS)

    Wong, Wing-Chun Godwin

    This dissertation focused on Kant's conception of physical matter in the Opus postumum. In this work, Kant postulates the existence of an ether which fills the whole of space and time with its moving forces. Kant's arguments for the existence of an ether in the so-called Ubergang have been acutely criticized by commentators. Guyer, for instance, thinks that Kant pushes the technique of transcendental deduction too far in trying to deduce the empirical ether. In defense of Kant, I held that it is not the actual existence of the empirical ether, but the concept of the ether as a space-time filler that is subject to a transcendental deduction. I suggested that Kant is doing three things in the Ubergang: First, he deduces the pure concept of a space-time filler as a conceptual hybrid of the transcendental object and permanent substance to replace the category of substance in the Critique. Then he tries to prove the existence of such a space-time filler as a reworking of the First Analogy. Finally, he takes into consideration the empirical determinations of the ether by adding the concept of moving forces to the space -time filler. In reconstructing Kant's proofs, I pointed out that Kant is absolutely committed to the impossibility of action-at-a-distance. If we add this new principle of no-action-at-a-distance to the Third Analogy, the existence of a space-time filler follows. I argued with textual evidence that Kant's conception of ether satisfies the basic structure of a field: (1) the ether is a material continuum; (2) a physical quantity is definable on each point in the continuum; and (3) the ether provides a medium to support the continuous transmission of action. The thrust of Kant's conception of ether is to provide a holistic ontology for the transition to physics, which can best be understood from a field-theoretical point of view. This is the main thesis I attempted to establish in this dissertation.

  5. Occupational asthma due to alkyl cyanoacrylate

    SciTech Connect

    Nakazawa, T. )

    1990-08-01

    A case of bronchial asthma induced by occupational exposure to alkyl cyanoacrylate, an adhesive, occurred in an assembly operation. Provocative exposure testing induced immediate and delayed asthmatic responses. Alkyl cyanoacrylate seemed to act as an allergen or as an irritant, resulting in the development of asthma.

  6. Stabilized dialkyl aluminum complexes as alkylating agents

    SciTech Connect

    Blum, J.; Baidossi, W.; Rosenfeld, A.

    1995-12-31

    Although trialkylaluminum derivatives are widely used as Ziegler-Natta polymerization co-catalysts, their application as routine alkylating agents is limited owing to their pyrophoric nature. The authors have now found that substitution of one of the alkyl moieties by a chelating group reduces the sensitivity of the organoaluminum compounds to air, and enables one to utilize them under normal laboratory conditions.

  7. Sulfonimide-containing poly(arylene ether)s and poly(arylene ether sulfone)s, methods for producing the same, and uses thereof

    DOEpatents

    Hofmann, Michael A.

    2006-11-14

    The present invention is directed to sulfonimide-containing polymers, specifically sulfonimide-containing poly(arylene ether)s and sulfonimide-containing poly(arylene ether sulfone)s, and processes for making the sulfonimide-containing poly(arylene ether)s and sulfonimide-containing poly(arylene ether sulfone)s, for use conductive membranes and fuel cells.

  8. Discovery of Inhibitors for the Ether Lipid-Generating Enzyme AGPS as Anti-Cancer Agents

    PubMed Central

    Piano, Valentina; Benjamin, Daniel I; Valente, Sergio; Nenci, Simone; Mai, Antonello; Aliverti, Alessandro; Nomura, Daniel K; Mattevi, Andrea

    2015-01-01

    Dysregulated ether lipid metabolism is an important hallmark of cancer cells. Previous studies have reported that lowering ether lipid levels by genetic ablation of the ether lipid-generating enzyme alkyl-glycerone phosphate synthase (AGPS) lowers key structural and oncogenic ether lipid levels and alters fatty acid, glycerophospholipid, and eicosanoid metabolism to impair cancer pathogenicity, indicating that AGPS may be a potential therapeutic target for cancer. In this study, we have performed a small-molecule screen to identify candidate AGPS inhibitors. We have identified several lead AGPS inhibitors and have structurally characterized their interactions with the enzyme and show that these inhibitors bind to distinct portions of the active site. We further show that the lead AGPS inhibitor 1a selectively lowers ether lipid levels in several types of human cancer cells and impairs their cellular survival and migration. We provide here the first report of in situ-effective pharmacological tools for inhibiting AGPS, which may provide chemical scaffolds for future AGPS inhibitor development for cancer therapy. PMID:26322624

  9. Alkylating reactivity and herbicidal activity of chloroacetamides.

    PubMed

    Jablonkai, Istvan

    2003-04-01

    The relationship between S- and N-alkylating reactivity and herbicidal activity within a series of chloroacetamides, including several commercial herbicides and newly synthesised analogues was studied. The S-alkylating reactivity of selected chloroacetamides, as well as those of atrazine and chlorfenprop-methyl, was determined by in vitro GSH conjugation at a ratio of GSH to alkylating agent of 25:1. A spectrophotometric reaction using 4-(4-nitrobenzyl)pyridine was used to characterise the N-alkylating reactivity of the chemicals. Our results indicate that a reduced level of N-alkylating reactivity correlates with an improved herbicidal efficacy at a practical rate. However, the phytoxicity of the molecules is not simply dependent on chemical reactivities, but strictly related to the molecular structure, indicating that lipophilicity, uptake, mobility and induction of detoxifying enzymes may also be decisive factors in the mode of action. PMID:12701706

  10. C-Alkylation by Hydrogen Autotransfer Reactions.

    PubMed

    Obora, Yasushi

    2016-04-01

    The development of practical, efficient, and atom-economical methods for the formation of carbon-carbon bonds remains a topic of considerable interest in current synthetic organic chemistry. In this review, we have summarized selected topics from the recent literature with particular emphasis on C-alkylation processes involving hydrogen transfer using alcohols as alkylation reagents. This review includes selected highlights concerning recent progress towards the modification of catalytic systems for the α-alkylation of ketones, nitriles, and esters. Furthermore, we have devoted a significant portion of this review to the methylation of ketones, alcohols, and indoles using methanol. Lastly, we have also documented recent advances in β-alkylation methods involving the dimerization of alcohols (Guerbet reaction), as well as new developments in C-alkylation methods based on sp (3) C-H activation. PMID:27573136

  11. Theory Of Alkyl Terminated Silicon Quantum Dots

    SciTech Connect

    Reboredo, F; Galli, G

    2004-08-19

    We have carried out a series of ab-initio calculations to investigate changes in the optical properties of Si quantum dots as a function of surface passivation. In particular, we have compared hydrogen passivated dots with those having alkyl groups at the surface. We find that, while on clusters with reconstructed surfaces a complete alkyl passivation is possible, steric repulsion prevents full passivation of Si dots with unreconstructed surfaces. In addition, our calculations show that steric repulsion may have a dominant effect in determining the surface structure, and eventually the stability of alkyl passivated clusters, with results dependent on the length of the carbon chain. Alkyl passivation weakly affects optical gaps of silicon quantum dots, while it substantially decreases ionization potentials and electron affinities and affect their excited state properties. On the basis of our results we propose that alkyl terminated quantum dots may be size selected taking advantage of the change in ionization potential as a function of the cluster size.

  12. Revisiting ether-derivatized imidazolium-based ionic liquids.

    PubMed

    Fei, Zhaofu; Ang, Wee Han; Zhao, Dongbin; Scopelliti, Rosario; Zvereva, Elena E; Katsyuba, Sergey A; Dyson, Paul J

    2007-08-30

    A series of ether-derivatized imidazolium halides have been prepared and characterized. Contrary to literature reports, they are all crystalline solids and have melting points well above room temperature (50-100 degrees C). Single crystals of the imidazolium salts, obtained in situ by slow cooling from their molten state to room temperature, were analyzed by X-ray crystallography, revealing various anion-cation interactions in the solid state. Exchange of the halides with [Tf(2)N]- yielded room temperature ionic liquids with viscosities that are comparable to related 1-alkyl-3-methylimidazolium ionic liquids. Density functional theory combined with IR spectroscopy has been used to analyze the role of functionalization of the imidazolium side chain on the formation of the molecular and supramolecular structure of the compounds and its possible impact on their physical properties. PMID:17676796

  13. Method for determination of methyl tert-butyl ether and its degradation products in water

    USGS Publications Warehouse

    Church, C.D.; Isabelle, L.M.; Pankow, J.F.; Rose, D.L.; Tratnyek, P.G.

    1997-01-01

    An analytical method is described that can detect the major alkyl ether compounds that are used as gasoline oxygenates (methyl tert-butyl ether, MTBE; ethyl tert-butyl ether, ETBE; and tert-amyl methyl ether, TAME) and their most characteristic degradation products (tert-butyl alcohol, TBA; tert-butyl formate, TBF; and tert-amyl alcohol, TAA) in water at sub-ppb concentrations. The new method involves gas chromatography (GC) with direct aqueous injection (DAI) onto a polar column via a splitless injector, coupled with detection by mass spectrometry (MS). DAI-GC/MS gives excellent agreement with conventional purge-and-trap methods for MTBE over a wide range of environmentally relevant concentrations. The new method can also give simultaneous identification of polar compounds that might occur as degradation products of gasoline oxygenates, such as TBA, TBF, TAA, methyl acetate, and acetone. When the method was applied to effluent from a column microcosm prepared with core material from an urban site in New Jersey, conversion of MTBE to TBA was observed after a lag period of 35 days. However, to date, analyses of water samples from six field sites using the DAI-GC/MS method have not produced evidence for the expected products of in situ degradation of MTBE.An analytical method is described that can detect the major alkyl ether compounds that are used as gasoline oxygenates (methyl tert-butyl ether, MTBE; ethyl tert-butyl ether, ETBE; and tert-amyl methyl ether, TAME) and their most characteristic degradation products (tert-butyl alcohol, TBA; tert-butyl formate, TBF; and tert-amyl alcohol, TAA) in water at sub-ppb concentrations. The new method involves gas chromatography (GC) with direct aqueous injection (DAI) onto a polar column via a splitless injector, coupled with detection by mass spectrometry (MS). DAI-GC/MS gives excellent agreement with conventional purge-and-trap methods for MTBE over a wide range of environmentally relevant concentrations. The new method

  14. Role of alkyl alcohol on viscosity of silica-based chemical gels for decontamination of highly radioactive nuclear facilities

    SciTech Connect

    Choi, B. S.; Yoon, S. B.; Jung, C. H.; Lee, K. W.; Moon, J. K.

    2012-07-01

    Silica-based chemical gel for the decontamination of nuclear facilities was prepared by using fumed silica as a viscosifier, a 0.5 M Ce (IV) solution dissolved in concentrated nitric acid as a chemical decontamination agent, and tripropylene glycol butyl ether (TPGBE) as a co-viscosifier. A new effective strategy for the preparation of the chemical gel was investigated by introducing the alkyl alcohols as organic solvents to effectively dissolve the co-viscosifier. The mixture solution of the co-viscosifier and alkyl alcohols was more effective in the control of viscosity than that of the co-viscosifier only in gel. Here, the alkyl alcohols played a key role as an effective dissolution solvent for the co-viscosifier in the preparation of the chemical gel, resulting in a reducing of the amount of the co-viscosifier and gel time compared with that of the chemical gel prepared without the alkyl alcohols. It was considered that the alkyl alcohols contributed to the effective dissolution of the co-viscosifier as well as the homogeneous mixing in the formation of the gel, while the co-viscosifier in an aqueous media of the chemical decontamination agent solution showed a lower solubility. The decontamination efficiency of the chemical gels prepared in this work using a multi-channel analyzer (MCA) showed a high decontamination efficiency of over ca. 94% and ca. 92% for Co-60 and Cs-137 contaminated on surface of the stainless steel 304, respectively. (authors)

  15. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-01-05

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70 C and 500 C and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  16. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1993-09-07

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 figures.

  17. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1994-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  18. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

    1994-06-14

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a molecular sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  19. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.

    1989-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  20. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70.degree. C. and 500.degree. C. and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

  1. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, Jr., Lawrence A.; Arganbright, Robert P.; Hearn, Dennis

    1993-01-01

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C.sub.2 to C.sub.10 olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80.degree. C. to 500.degree. C., using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene to about the mid point of the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms.

  2. Alkylation of organic aromatic compounds

    DOEpatents

    Smith, L.A. Jr.

    1989-07-18

    Aromatic compounds are alkylated in a catalytic distillation, wherein the catalyst structure also serves as a distillation component by contacting the aromatic compound with a C[sub 2] to C[sub 10] olefin in the catalyst bed under 0.25 to 50 atmospheres of pressure and at temperatures in the range of 80 C to 500 C, using as the catalyst a mole sieve characterized as acidic or an acidic cation exchange resin. For example, ethyl benzene is produced by feeding ethylene below the catalyst bed while benzene is conveniently added through the reflux in molar excess to that required to react with ethylene, thereby reacting substantially all of the ethylene and recovering benzene as the principal overhead and ethyl benzene in the bottoms. 1 fig.

  3. Isolation of a Bacterial Culture That Degrades Methyl t-Butyl Ether

    PubMed Central

    Salanitro, J. P.; Diaz, L. A.; Williams, M. P.; Wisniewski, H. L.

    1994-01-01

    We have isolated a mixed bacterial culture (BC-1) which is capable of degrading the gasoline oxygenate methyl t-butyl ether (MTBE). BC-1 was developed from seed microorganisms present in a chemical plant biotreater sludge. This enrichment culture has been maintained in continuous culture treating high concentrations of MTBE (120 to 200 mg/liter) as the sole carbon source in a simple feed containing NH4+, PO43-, Mg2+, and Ca2+ nutrients. The unit had a stable MTBE removal rate when maintained with a long cell retention time (ca. 80 to 90 days); however, when operated at a ≤50-day cell waste rate, loss of MTBE-degrading activity was observed. The following three noteworthy experimental data show that MTBE is biodegraded extensively by BC-1: (i) the continuous (oxygen-sparged) culture was able to sustain a population of autotrophic ammonia-oxidizing bacteria which could nitrify influent NH4+ concentrations at high rates and obtain CO2 (sole carbon source for growth) from the metabolism of the alkyl ether, (ii) BC-1 metabolized radiolabeled either (14CH3O-MTBE) to 14CO2 (40%) and 14C-labeled cells (40%), and (iii) cell suspensions of the culture were capable of degrading (substrate depletion experiments) MTBE to t-butyl alcohol, a primary metabolite of MTBE. BC-1 is a mixed culture containing several bacterial species and is the first culture of its kind which can completely degrade an alkyl ether. PMID:16349335

  4. 40 CFR 721.3380 - Anilino ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Anilino ether. 721.3380 Section 721... Anilino ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as anilino ether (P-83-910) is subject to reporting under this section...

  5. 40 CFR 721.3364 - Aliphatic ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aliphatic ether. 721.3364 Section 721... Aliphatic ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an aliphatic ether (PMN P-93-1381) is subject to reporting under...

  6. 40 CFR 721.3364 - Aliphatic ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Aliphatic ether. 721.3364 Section 721... Aliphatic ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an aliphatic ether (PMN P-93-1381) is subject to reporting under...

  7. 40 CFR 721.3374 - Alkylenediolalkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkylenediolalkyl ether. 721.3374... Substances § 721.3374 Alkylenediolalkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as an alkylenediolalkyl ether (PMN P-93-362) is subject...

  8. 40 CFR 721.3437 - Dialkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dialkyl ether. 721.3437 Section 721... Dialkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as dialkyl ether (PMN P-93-1308) is subject to reporting under this...

  9. 40 CFR 721.3374 - Alkylenediolalkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkylenediolalkyl ether. 721.3374... Substances § 721.3374 Alkylenediolalkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as an alkylenediolalkyl ether (PMN P-93-362) is subject...

  10. 40 CFR 721.3437 - Dialkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl ether. 721.3437 Section 721... Dialkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as dialkyl ether (PMN P-93-1308) is subject to reporting under this...

  11. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  12. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  13. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  14. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  15. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  16. Lacinilene C 7-methyl ether

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lacinilene C 7-methyl ether is an antimicrobial compound produced by the cotton plant in response to attack by pathogens. For the first time, we now report the crystal structure of this compound. This may prove useful in studies on the interaction of the compound with pathogenic fungal cells....

  17. Desoxyhemigossypol-6-methyl-ether

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Desoxyhemigossypol-6-methyl ether is an antimicrobial compound produced by the cotton plant in response to attack by pathogens. For the first time, we now report the crystal structure of this compound. This may prove useful in studies on the interaction of the compound with pathogenic fungal cells...

  18. Bis(chloromethyl)ether (BCME)

    Integrated Risk Information System (IRIS)

    Bis ( chloromethyl ) ether ( BCME ) ; CASRN 542 - 88 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments f

  19. Propylene glycol monomethyl ether (PGME)

    Integrated Risk Information System (IRIS)

    Propylene glycol monomethyl ether ( PGME ) ; CASRN 107 - 98 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assess

  20. Bis(chloroethyl)ether (BCEE)

    Integrated Risk Information System (IRIS)

    Bis ( chloroethyl ) ether ( BCEE ) ; CASRN 111 - 44 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  1. p,p\\'-Dibromodiphenyl ether

    Integrated Risk Information System (IRIS)

    p , p ' - Dibromodiphenyl ether ; CASRN 2050 - 47 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for

  2. Aza-crown ether complex cation ionic liquids: preparation and applications in organic reactions.

    PubMed

    Song, Yingying; Cheng, Chen; Jing, Huanwang

    2014-09-26

    Aza-crown ether complex cation ionic liquids (aCECILs) were devised, fabricated, and characterized by using NMR spectroscopy, MS, thermogravimetric differential thermal analysis (TG-DTA), elemental analysis and physical properties. These new and room-temperature ILs were utilized as catalysts in various organic reactions, such as the cycloaddition reaction of CO2 to epoxides, esterification of acetic acid and alcohols, the condensation reaction of aniline and propylene carbonate, and Friedel-Crafts alkylation of indole with aldehydes were investigated carefully. In these reactions, the ionic liquid exhibited cooperative catalytic activity between the anion and cation. In addition, the aza-[18-C-6HK][HSO4]2 was the best acidic catalyst in the reactions of esterification and Friedel-Crafts alkylation under mild reaction conditions. PMID:25154312

  3. Thermally induced alkylation of diamond.

    PubMed

    Hoeb, Marco; Auernhammer, Marianne; Schoell, Sebastian J; Brandt, Martin S; Garrido, Jose A; Stutzmann, Martin; Sharp, Ian D

    2010-12-21

    We present an approach for the thermally activated formation of alkene-derived self-assembled monolayers on oxygen-terminated single and polycrystalline diamond surfaces. Chemical modification of the oxygen and hydrogen plasma-treated samples was achieved by heating in 1-octadecene. The resulting layers were characterized using X-ray photoelectron spectroscopy, thermal desorption spectroscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and water contact angle measurements. This investigation reveals that alkenes selectively attach to the oxygen-terminated sites via covalent C-O-C bonds. The hydrophilic oxygen-terminated diamond is rendered strongly hydrophobic following this reaction. The nature of the process limits the organic layer growth to a single monolayer, and FTIR measurements reveal that such monolayers are dense and well ordered. In contrast, hydrogen-terminated diamond sites remain unaffected by this process. This method is thus complementary to the UV-initiated reaction of alkenes with diamond, which exhibits the opposite reactivity contrast. Thermal alkylation increases the range of available diamond functionalization strategies and provides a means of straightforwardly forming single organic layers in order to engineer the surface properties of diamond. PMID:21090790

  4. N-Alkylation by Hydrogen Autotransfer Reactions.

    PubMed

    Ma, Xiantao; Su, Chenliang; Xu, Qing

    2016-06-01

    Owing to the importance of amine/amide derivatives in all fields of chemistry, and also the green and environmentally benign features of using alcohols as alkylating reagents, the relatively high atom economic dehydrative N-alkylation reactions of amines/amides with alcohols through hydrogen autotransfer processes have received much attention and have developed rapidly in recent decades. Various efficient homogeneous and heterogeneous transition metal catalysts, nano materials, electrochemical methods, biomimetic methods, asymmetric N-alkylation reactions, aerobic oxidative methods, and even certain transition metal-free, catalyst-free, or autocatalyzed methods, have also been developed in recent years. With a brief introduction to the background and developments in this area of research, this chapter focuses mainly on recent progress and technical and conceptual advances contributing to the development of this research in the last decade. In addition to mainstream research on homogeneous and heterogeneous transition metal-catalyzed reactions, possible mechanistic routes for hydrogen transfer and alcohol activation, which are key processes in N-alkylation reactions but seldom discussed in the past, the recent reports on computational mechanistic studies of the N-alkylation reactions, and the newly emerged N-alkylation methods based on novel alcohol activation protocols such as air-promoted reactions and transition metal-free methods, are also reviewed in this chapter. Problems and bottlenecks that remained to be solved in the field, and promising new research that deserves greater future attention and effort, are also reviewed and discussed. PMID:27573267

  5. Light induced controlled release of fragrances by Norrish type II photofragmentation of alkyl phenyl ketones.

    PubMed

    Levrand, Barbara; Herrmann, Andreas

    2002-11-01

    The use of alkyl phenyl ketones as delivery systems for the controlled release of fragrances was investigated by photoirradiation of undegassed solutions with a xenon lamp as well as natural sunlight. A large variety of precursor compounds was prepared efficiently in a few reaction steps from commercially available starting materials. The Norrish type II photofragmentation was found to be the predominant reaction pathway to yield the desired perfumery alkenes and acetophenones in polar and apolar solution. Systematic GC-MS analysis of the irradiated solutions allowed identification of a series of side products that are due to the presence of oxygen. A detailed analysis of the product distribution after irradiation was carried out for a series of 4-alkoxy-1-phenylbutanone derivatives. Besides the expected acetophenones, vinyl ethers and phenylcyclobutanols, the formation of alkyl formates, alcohols and 4-oxo-4-phenylbutanoates was observed. The product distribution as influenced by solvent polarity, precursor concentration and substituent effects was investigated. The utility of alkyl phenyl ketones as precursors for the light induced controlled release of fragrances under natural daylight conditions was also demonstrated. PMID:12659532

  6. Degradation kinetics of poly(ether-urethane) Estane® induced by electron irradiation

    NASA Astrophysics Data System (ADS)

    Dannoux, A.; Esnouf, S.; Begue, J.; Amekraz, B.; Moulin, C.

    2005-07-01

    Radiation effects on a segmented aromatic poly(ether-urethane) induced by electron beam irradiation under oxygen atmosphere were investigated using Fourier transform infrared spectroscopy (FTIR) and electron paramagnetic resonance (EPR) in order to determine the degradation mechanisms. Thin films have been irradiated under a dose rate of 1 MGy/h with absorbed doses varying from 25 to 1000 kGy under O2. FTIR spectra have shown the formation of hydroperoxides, carboxylic acids, primary amines, alcohols, esters and formates. Moreover, the decrease of urethane and ether absorbances revealed the degradation of both soft and hard segments. Spin-trapping technique was used to monitor the evolution of short-lived peroxy and alkyl radicals at room temperature. Finally, a mechanism of degradation for electron irradiated polyurethane is proposed.

  7. Process to convert biomass and refuse derived fuel to ethers and/or alcohols

    DOEpatents

    Diebold, J.P.; Scahill, J.W.; Chum, H.L.; Evans, R.J.; Rejai, B.; Bain, R.L.; Overend, R.P.

    1996-04-02

    A process is described for conversion of a feedstock selected from the group consisting of biomass and refuse derived fuel (RDF) to provide reformulated gasoline components comprising a substantial amount of materials selected from the group consisting of ethers, alcohols, or mixtures thereof, comprising: drying said feedstock; subjecting said dried feedstock to fast pyrolysis using a vortex reactor or other means; catalytically cracking vapors resulting from said pyrolysis using a zeolite catalyst; condensing any aromatic byproduct fraction; catalytically alkylating any benzene present in said vapors after condensation; catalytically oligomerizing any remaining ethylene and propylene to higher olefins; isomerizing said olefins to reactive iso-olefins; and catalytically reacting said iso-olefins with an alcohol to form ethers or with water to form alcohols. 35 figs.

  8. Process to convert biomass and refuse derived fuel to ethers and/or alcohols

    DOEpatents

    Diebold, James P.; Scahill, John W.; Chum, Helena L.; Evans, Robert J.; Rejai, Bahman; Bain, Richard L.; Overend, Ralph P.

    1996-01-01

    A process for conversion of a feedstock selected from the group consisting of biomass and refuse derived fuel (RDF) to provide reformulated gasoline components comprising a substantial amount of materials selected from the group consisting of ethers, alcohols, or mixtures thereof, comprising: drying said feedstock; subjecting said dried feedstock to fast pyrolysis using a vortex reactor or other means; catalytically cracking vapors resulting from said pyrolysis using a zeolite catalyst; condensing any aromatic byproduct fraction; catalytically alkylating any benzene present in said vapors after condensation; catalytically oligomerizing any remaining ethylene and propylene to higher olefins; isomerizing said olefins to reactive iso-olefins; and catalytically reacting said iso-olefins with an alcohol to form ethers or with water to form alcohols.

  9. Ether analogues of DPA-714 with subnanomolar affinity for the translocator protein (TSPO).

    PubMed

    Banister, Samuel D; Beinat, Corinne; Wilkinson, Shane M; Shen, Bin; Bartoli, Cecilia; Selleri, Silvia; Da Pozzo, Eleonora; Martini, Claudia; Chin, Frederick T; Kassiou, Michael

    2015-03-26

    Sixteen new phenyl alkyl ether derivatives (12, 14-28) of the 5,7-dimethylpyrazolo[1,5-a]pyrimidin-3-ylacetamide (DPA) class were synthesized and evaluated in a competition binding assay against [(3)H]PK11195 using 18 kDa translocator protein (TSPO) derived from rat kidney mitochondrial fractions. All analogues showed superior binding affinities for TSPO compared to DPA-713 (5) and DPA-714 (6). Picomolar affinities were observed for this class of TSPO ligands in this assay for the first time, with phenethyl ether 28 showing the greatest affinity (Ki = 0.13 nM). Additionally, all analogues increased pregnenolone biosynthesis (134-331% above baseline) in a rat C6 glioma cell steroidogenesis assay. PMID:25725375

  10. Liquid exfoliation of alkyl-ether functionalised layered metal-organic frameworks to nanosheets.

    PubMed

    Foster, Jonathan A; Henke, Sebastian; Schneemann, Andreas; Fischer, Roland A; Cheetham, Anthony K

    2016-08-18

    We report the synthesis of a 2D-layered metal-organic framework incorporating weakly interacting chains designed to aid exfoliation of the layers into nanosheets. Dispersion of the nanosheets exposes labile metal-sites which are shown to exchange solvent molecules allowing the nanosheets to act as sensors in suspension. PMID:27452790

  11. Sodium-oxygen batteries with alkyl-carbonate and ether based electrolytes.

    PubMed

    Kim, Jinsoo; Lim, Hee-Dae; Gwon, Hyeokjo; Kang, Kisuk

    2013-03-14

    Recently, metal-air batteries, such as lithium-air and zinc-air systems, have been studied extensively as potential candidates for ultra-high energy density storage devices because of their exceptionally high capacities. Here, we report such an electrochemical system based on sodium, which is abundant and inexpensive. Two types of sodium-oxygen batteries were introduced and studied, i.e. with carbonate and non-carbonate electrolytes. Both types could deliver specific capacities (2800 and 6000 mA h g(-1)) comparable to that of lithium-oxygen batteries but with slightly lower discharge voltages (2.3 V and 2.0 V). The reaction mechanisms of sodium-oxygen batteries in carbonate and non-carbonate electrolytes were investigated and compared with those of lithium-oxygen batteries. PMID:23386220

  12. Competition between reaction and intramolecular energy redistribution in solution: observation and nature of nonstatistical dynamics in the ozonolysis of vinyl ethers.

    PubMed

    Quijano, Larisa Mae M; Singleton, Daniel A

    2011-09-01

    Experimental product ratios in ozonolyses of alkyl vinyl ethers in solution do not fit with expectations based on statistical rate theories. The selectivity among cleavage pathways increases with the size of the alkyl group but to an extent that is far less than RRKM theory would predict. Trajectory studies account for the observed selectivities and support a mechanism involving a competition between cleavage of the primary ozonide and intramolecular vibrational energy redistribution. A statistical model is presented that assumes that RRKM theory holds for a molecular subset of the primary ozonides, allowing the rates of energy loss from the ozonides to be estimated from the observed product ratios. PMID:21812422

  13. Competition between Reaction and Intramolecular Energy Redistribution in Solution. Observation and Nature of Nonstatistical Dynamics in the Ozonolysis of Vinyl Ethers

    PubMed Central

    Quijano, Larisa Mae M.; Singleton, Daniel A.

    2011-01-01

    Experimental product ratios in ozonolyses of alkyl vinyl ethers in solution do not fit with expectations from statistical rate theories. The selectivity among cleavage pathways increases with the size of the alkyl group but to an extent that is far less than RRKM theory would predict. Trajectory studies account for the observed selectivities and support a mechanism involving a competition between cleavage of the primary ozonide and intramolecular vibrational energy redistribution. An approximate statistical model is presented that assumes that RRKM theory holds for a molecular subset of the primary ozonides, allowing estimates of the rates of energy loss from the primary ozonides based on the observed product ratios. PMID:21812422

  14. Alkyl rearrangement processes in organozirconium complexes. Observation of internal alkyl complexes during hydrozirconation

    SciTech Connect

    Chirik, P.J.; Day, M.W.; Labinger, J.A.; Bercaw, J.E.

    1999-11-10

    Isotopically labeled alkyl zirconocene complexes of the form (CpR{sub n}){sub 2}Zr(CH{sub 2}CDR{sub 2}{prime})(X) (CpR{sub n} = alkyl-substituted cyclopentadienyl; R{prime} = H, alkyl group; X = H, D, Me) undergo isomerization of the alkyl ligand as well as exchange with free olefin in solution under ambient conditions. Increasing the substitution on the Cp ring results in slower isomerization reactions, but these steric effects are small. In contrast, changing X has a very large effect on the rate of isomerization. Pure {sigma}-bonding ligands such as methyl and hydride promote rapid isomerization, whereas {pi}-donor ligands inhibit {beta}-H elimination and hence alkyl isomerization. For ({eta}{sup 5}-C{sub 5}H{sub 5}){sub 2}Zr(R)(Cl), internal alkyl complexes have been observed for the first time. The rate of isomerization depends on the length of the alkyl group: longer alkyl chains (heptyl, hexyl) isomerize faster than shorter chains (butyl). The transient intermediate species have been identified by a combination of isotopic labeling and {sup 1}H, {sup 2}H, and {sup 13}C NMR experiments. The solid-state structure of the zirconocene cyclopentyl chloride complex, Cp{sub 2}Zr(cyclo-C{sub 5}H{sub 9})(Cl), has been determined by X-ray diffraction.

  15. Blend of alkyl phenol ethoxylates and alkyl phenol glycoxylates and their use as surfactants

    SciTech Connect

    Grolitzer, M. A.

    1985-11-12

    Nonionic surfactant compositions useful in forming stable emulsions with oil in saline solutions comprising a blend of: at least one alkyl phenol ethoxylate and at least one alkyl phenol glycoxylate. These surfactant compositions may be employed in enhanced oil recovery processes and other applications where good emulsification and high salinity tolerances are required such as textiles, leather, dairy, concrete grinding aids and drilling muds.

  16. A new alternative to expandable pedicle screws: Expandable poly-ether-ether-ketone shell.

    PubMed

    Demir, Teyfik

    2015-05-01

    Screw pullout is a very common problem in the fixation of sacrum with pedicle screws. The principal cause of this problem is that the cyclic micro motions in the fixation of sacrum are higher than the other regions of the vertebrae that limit the osteo-integration between bone and screw. In addition to that, the bone quality is very poor at sacrum region. This study investigated a possible solution to the pullout problem without the expandable screws' handicaps. Newly designed poly-ether-ether-ketone expandable shell and classical pedicle screws were biomechanically compared. Torsion test, pullout tests, fatigue tests, flexion/extension moment test, axial gripping capacity tests and torsional gripping capacity tests were conducted in accordance with ASTM F543, F1798 and F1717. Standard polyurethane foam and calf vertebrae were used as embedding medium for pullout tests. Classical pedicle screw pullout load on polyurethane foam was 564.8 N compared to the failure load for calf vertebrae's 1264 N. Under the same test conditions, expandable poly-ether-ether-ketone shell system's pullout loads from polyurethane foam and calf vertebrae were 1196.3 and 1890 N, respectively. The pullout values for expandable poly-ether-ether-ketone shell were 33% and 53% higher than classical pedicle screw on polyurethane foam and calf vertebrae, respectively. The expandable poly-ether-ether-ketone shell exhibited endurance on its 90% of yield load. Contrary to poly-ether-ether-ketone shell, classical pedicle screw exhibited endurance on 70% of its yield load. Expandable poly-ether-ether-ketone shell exhibited much higher pullout performance than classical pedicle screw. Fatigue performance of expandable poly-ether-ether-ketone shell is also higher than classical pedicle screw due to damping the micro motion capacity of the poly-ether-ether-ketone. Expandable poly-ether-ether-ketone shell is a safe alternative to all other expandable pedicle screw systems on mechanical perspective

  17. Alkylation of isobutane with light olefins: Yields of alkylates for different olefins

    SciTech Connect

    Albright, L.F.; Kranz, K.E.; Masters, K.R.

    1993-12-01

    For alkylation of isobutane with C{sub 3}-C{sub 5} olefins using sulfuric acid as the catalyst, the yields of alkylates with different olefins are compared as the operating conditions are changed. The results of recent pilot plant experiments with propylene, C{sub 4} olefins, and C{sub 5} olefins permit such comparisons. The yields expressed as weight of alkylate produced per 100 wt of olefin consumed varied from about 201:100 to 220:100. Weight ratios of the isobutane consumed per olefin consumed vary from about 101:100 to 120:100. differences of yield values are explained by the changes in the overall chemistry. The procedure employed to calculate yields with good accuracy is based on the analysis of the alkylate and the amount of conjunct polymers produced. Based on literature data, yields are also reported for alkylations using HF as the catalyst.

  18. Liquid Densities of Fluorinated Ethers

    NASA Astrophysics Data System (ADS)

    Nakazawa, Noriaki; Sako, Takeshi; Nakane, Takashi; Sekiya, Akira; Kawamura, Mitsutaka; Sato, Masahito; Mochizuki, Yuji; Takada, Naoto; Yasumoto, Masahiko

    The liquid densities of thirteen fluorinated ethers which are expected as promising candidates of CFC alternatives were measured at temperatures from 278 K to 323 K and atmospheric pressure. The fluorinated ethers used in this study are 1-difluoromethoxy-1,1, 2- trifluoroethane, 1-methoxy-1, 1,2,2-tetrafluoroethane, 1-methoxy-2,2 ,3 ,3- tetrafluoropropane, 1-methoxy-1-trifluoromethy1-2,2 ,2- trifluoroethane, 1-methoxy-1,1,2,2, 3-hexafluoropropane,1-difluoromethoxy-2,2, 3, 3 -tetrafluoropropane, 1-methoxy-heptafluoropropane,1-difluoromethoxy-2, 2, 3, 3, 3-pentafluoropropane, 1- (2, 2, 2-trifruoroethoxy) -1, 1, 2,2-tetrafluoroethane, 1-pentafluoroethoxy-1, 1, 2, 2-tetrafluoroethane,2-trifluoromethoxy-1, 1, 1,2-tetrafluorobutane, 1-proxynonafluorobutane, and 1-ethoxy-undecafluoropentane. The liquid density has been measured by the vibrating tube densitometer (ANTON PARR, DMA 602) within an error of 0.07%. The liquid densities decrease monotonically with increase of temperature.

  19. 3-O-Alkyl-2,3-dehydrosilibinins: Two synthetic approaches and in vitro effects toward prostate cancer cells.

    PubMed

    Zhang, Sheng; Vue, Bao; Huang, Michael; Zhang, Xiaojie; Lee, Timmy; Chen, Guanglin; Zhang, Qiang; Zheng, Shilong; Wang, Guangdi; Chen, Qiao-Hong

    2016-07-15

    Eight 3-O-alkyl-2,3-dehydrosilibinins have been synthesized from commercially available silibinin through two synthetic approaches. A one-pot reaction, starting with aerobic oxidation of silibinin followed by direct alkylation of the phenolic hydroxyl group in the subsequent 2,3-dehydrosilibinin, furnishes the desired derivatives in 11-16% yields. The three-step procedure employing benzyl ether to protect 7-OH in silibinin generates the desired derivatives in 30-46% overall yields. The antiproliferative activity of the 2,3-dehydrosilibinin derivatives against both androgen-sensitive and androgen-insensitive prostate cancer cells have been assessed using a WST-1 cell proliferation assay. All derivatives exhibited greater antiproliferative potency than silibinin, with 2,3-dehydrosilibinins each possessing a three- to five-carbon linear alkyl group to 3-OH (IC50 values in a range of 1.71-3.06μM against PC-3 and LNCaP cells) as the optimal derivatives. The optimal potency was reached with three- to five-carbon alkyl groups. Our findings suggest that 3-O-propyl-2,3-dehydrosilibinin effectively inhibits the growth of PC-3 prostate cancer cells by arresting cell cycle in the G0/G1 phase, but not by activating PC-3 cell apoptosis. PMID:27261177

  20. Measuring exposures to glycol ethers.

    PubMed

    Clapp, D E; Zaebst, D D; Herrick, R F

    1984-08-01

    In 1981, NIOSH began investigating the potential reproductive health effects resulting from exposures to a class of organic solvents known generically as glycol ethers (GE). This research was begun as a result of the NIOSH criteria document development program which revealed little data available on the health effects of glycol ether exposure. Toxicologic research was begun by NIOSH and other researchers which suggested substantial reproductive effects in animals. These animal data motivated a study of human exposures in the occupational setting. In 1981 and 1982 NIOSH conducted several walk-through surveys which included preliminary measurements of exposures in a variety of industries including painting trades, coal mining, production blending and distribution facilities, aircraft fueling, and communications equipment repair facilities. The human exposure data from these surveys is summarized in this paper with most results well below 1 parts per million (ppm) and only a few values approaching 10 ppm. Blood samples were collected at one site resulting in GE concentrations below the limit of detection. Exposures to airborne glycol ethers, in the industries investigated during the collection of this data, revealed several problems in reliably sampling GE at low concentrations. It became apparent, from the data and observations of work practices, that air monitoring alone provided an inadequate index of GE exposure. Further field studies of exposure to GE are anticipated, pending location of additional groups of exposed workers and development of more reliable methods for characterizing exposure, especially biological monitoring. PMID:6499824

  1. Alkyl phosphonic acids and sulfonic acids in the Murchison meteorite

    NASA Technical Reports Server (NTRS)

    Cooper, George W.; Onwo, Wilfred M.; Cronin, John R.

    1992-01-01

    Homologous series of alkyl phosphonic acids and alkyl sulfonic acids, along with inorganic orthophosphate and sulfate, are identified in water extracts of the Murchison meteorite after conversion to their t-butyl dimethylsilyl derivatives. The methyl, ethyl, propyl, and butyl compounds are observed in both series. Five of the eight possible alkyl phosphonic acids and seven of the eight possible alkyl sulfonic acids through C4 are identified. Abundances decrease with increasing carbon number as observed of other homologous series indigenous to Murchison. Concentrations range downward from approximately 380 nmol/gram in the alkyl sulfonic acid series, and from 9 nmol/gram in the alkyl phosphonic acid series.

  2. Formation of secondary organic aerosol and oligomers from the ozonolysis of enol ethers

    NASA Astrophysics Data System (ADS)

    Sadezky, A.; Chaimbault, P.; Mellouki, A.; Römpp, A.; Winterhalter, R.; Le Bras, G.; Moortgat, G. K.

    2006-06-01

    Formation of secondary organic aerosol has been observed in the gas phase ozonolysis of a series of enol ethers, among them several alkyl vinyl ethers (AVE, ROCH=CH2), such as ethyl, propyl, n-butyl, iso-butyl, t-butyl vinyl ether, and ethyl propenyl ether (EPE, C2H5OCH=CHCH3). The ozonolysis has been studied in a 570 l spherical glass reactor at atmospheric pressure (730 Torr) and temperature (296 K). Gas phase reaction products were investigated by in-situ FTIR spectroscopy, and secondary organic aerosol (SOA) formation was monitored by a scanning mobility particle sizer (SMPS). The chemical composition of the formed SOA was analysed by a hybrid mass spectrometer using electrospray ionization (ESI). The main stable gas phase reaction product is the respective alkyl formate ROC(O)H, formed with yields of 60 to 80%, implying that similar yields of the corresponding Criegee Intermediates (CI) CH2O2 for the AVE and CH3CHO2 for EPE are generated. Measured SOA yields are between 2 to 4% for all enol ethers. Furthermore, SOA formation is strongly reduced or suppressed by the presence of an excess of formic acid, which acts as an efficient CI scavenger. Chemical analysis of the formed SOA by ESI(+)/MS-TOF allows to identify oligomeric compounds in the mass range 200 to 800 u as its major constituents. Repetitive chain units are identified as CH2O2 (mass 46) for the AVE and C2H4O2 (mass 60) for EPE and thus have the same chemical compositions as the respective major Criegee Intermediates formed during ozonolysis of these ethers. The oligomeric structure and chain unit identity are confirmed by HPLC/ESI(+)/MS-TOF and ESI(+)/MS/MS-TOF experiments, whereby successive and systematic loss of a fragment with mass 46 for the AVE (and mass 60 for EPE) is observed. It is proposed that the oligomer has the following basic structure of an oligoperoxide, -[CH(R)-O-O]n-, where R=H for the AVE and R=CH3 for the EPE. Oligoperoxide formation is thus suggested to be another, so far

  3. Formation of secondary organic aerosol and oligomers from the ozonolysis of enol ethers

    NASA Astrophysics Data System (ADS)

    Sadezky, A.; Chaimbault, P.; Mellouki, A.; Römpp, A.; Winterhalter, R.; Le Bras, G.; Moortgat, G. K.

    2006-10-01

    Formation of secondary organic aerosol has been observed in the gas phase ozonolysis of a series of enol ethers, among them several alkyl vinyl ethers (AVE, ROCH=CH2), such as ethyl, propyl, n-butyl, iso-butyl, t-butyl vinyl ether, and ethyl propenyl ether (EPE, C2H5OCH=CHCH3). The ozonolysis has been studied in a 570 l spherical glass reactor at ambient pressure (730 Torr) and room temperature (296 K). Gas phase reaction products were investigated by in-situ FTIR spectroscopy, and secondary organic aerosol (SOA) formation was monitored by a scanning mobility particle sizer (SMPS). The chemical composition of the formed SOA was analysed by a hybrid mass spectrometer using electrospray ionization (ESI). The main stable gas phase reaction product is the respective alkyl formate ROC(O)H, formed with yields of 60 to 80%, implying that similar yields of the corresponding excited Criegee Intermediates (CI) CH2O2 for the AVE and CH3CHO2 for EPE are generated. Measured SOA yields are between 2 to 4% for all enol ethers. Furthermore, SOA formation is strongly reduced or suppressed by the presence of an excess of formic acid, which acts as an efficient CI scavenger. Chemical analysis of the formed SOA by ESI(+)/MS-TOF allows to identify oligomeric compounds in the mass range 200 to 800 u as its major constituents. Repetitive chain units are identified as CH2O2 (mass 46) for the AVE and C2H4O2 (mass 60) for EPE and thus have the same chemical compositions as the respective major Criegee Intermediates formed during ozonolysis of these ethers. The oligomeric structure and chain unit identity are confirmed by HPLC/ESI(+)/MS-TOF and ESI(+)/MS/MS-TOF experiments, whereby successive and systematic loss of a fragment with mass 46 for the AVE (and mass 60 for EPE) is observed. It is proposed that the oligomer has the following basic structure of an oligoperoxide, -[CH(R)-O-O]n-, where R=H for the AVE and R=CH3 for the EPE. Oligoperoxide formation is thus suggested to be another, so

  4. Crystalline Imide/Arylene Ether Copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Hergenrother, Paul M.; Bass, Robert G.

    1991-01-01

    Series of imide/arylene ether block copolymers prepared by using arylene ether blocks to impart low melt viscosity, and imide blocks to provide high strength and other desirable mechanical properties. Work represents extension of LAR-14159 on imide/arylene ether copolymers in form of films, moldings, adhesives, and composite matrices. Copolymers potentially useful in variety of high-temperature aerospace and microelectronic applications.

  5. Aza crown ether compounds as anion receptors

    DOEpatents

    Lee, Hung Sui; Yang, Xiao-Oing; McBreen, James

    1998-08-04

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI.sup.+ ion in alkali metal batteries.

  6. Aza crown ether compounds as anion receptors

    DOEpatents

    Lee, H.S.; Yang, X.O.; McBreen, J.

    1998-08-04

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI{sup +} ion in alkali metal batteries. 3 figs.

  7. LaRC-ITPI/arylene ether copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Working, Dennis C.

    1991-01-01

    As part of an effort to develop high performance structural resins for aerospace applications, work has continued on block copolymers containing imide and arylene ether segments. The arylene ether block used in this study contains a bulky fluorene group in the polymer backbone while the imide block contains an arylene ketone segment similar to that in the arylene ether block and has been named LaRC-ITPI. A series of imide/arylene ether block and segmented copolymers were prepared and characterized. Films were prepared from these copolymers and mechanical properties were measured.

  8. Palladium-Catalyzed, Ring-Forming Aromatic C–H Alkylations with Unactivated Alkyl Halides

    PubMed Central

    Venning, Alexander R. O.; Bohan, Patrick T.; Alexanian, Erik J.

    2015-01-01

    A catalytic C–H alkylation using unactivated alkyl halides and a variety of arenes and heteroarenes is described. This ring-forming process is successful with a variety of unactivated primary and secondary alkyl halides, including those with β-hydrogens. In contrast to standard polar or radical cyclizations of aromatic systems, electronic activation of the substrate is not required. The mild, catalytic reaction conditions are highly functional group tolerant and facilitate access to a diverse range of synthetically and medicinally important carbocyclic and heterocyclic systems. PMID:25746442

  9. Mechanisms of catalytic cleavage of benzyl phenyl ether in aqueous and apolar phases

    SciTech Connect

    He, Jiayue; Lu, Lu; Zhao, Chen; Mei, Donghai; Lercher, Johannes A.

    2014-03-01

    Catalytic pathways for the cleavage of ether bonds in benzyl phenyl ether (BPE) in liquid phase using Ni- and zeolite-based catalysts are explored. In the absence of catalysts, the C-O bond is selectively cleaved in water by hydrolysis, forming phenol and benzyl alcohol as intermediates, followed by alkylation. The hydronium ions catalyzing the reactions are provided by the dissociation of water at 523 K. Upon addition of HZSM-5, rates of hydrolysis and alkylation are markedly increased in relation to proton concentrations. In the presence of Ni/SiO2, the selective hydrogenolysis dominates for cleaving the Caliphatic-O bond. Catalyzed by the dual-functional Ni/HZSM-5, hydrogenolysis occurs as the major route rather than hydrolysis (minor route). In apolar undecane, the non-catalytic thermal pyrolysis route dominates. Hydrogenolysis of BPE appears to be the major reaction pathway in undecane in the presence of Ni/SiO2 or Ni/HZSM-5, almost completely suppressing radical reactions. Density functional theory (DFT) calculations strongly support the proposed C-O bond cleavage mechanisms on BPE in aqueous and apolar phases. These calculations show that BPE is initially protonated and subsequently hydrolyzed in the aqueous phase. Finally, DFT calculations suggest that the radical reactions in non-polar solvents lead to primary benzyl and phenoxy radicals in undecane, which leads to heavier condensation products as long as metals are absent for providing dissociated hydrogen.

  10. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    DOEpatents

    Ginosar, Daniel M.; Petkovic, Lucia

    2009-09-22

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  11. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    DOEpatents

    Ginosar, Daniel M.; Petkovic, Lucia M.

    2010-12-28

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  12. Organocatalytic Aerobic Oxidation of Benzylic sp(3) C-H Bonds of Ethers and Alkylarenes Promoted by a Recyclable TEMPO Catalyst.

    PubMed

    Zhang, Zhiguang; Gao, Yuan; Liu, Yuan; Li, Jianjun; Xie, Hexin; Li, Hao; Wang, Wei

    2015-11-01

    An entirely metal-free catalyst system consisting of an easily prepared recyclable new TEMPO derived sulfonic salt catalyst, and mineral acids (NaNO2 and HCl) has been developed for selective aerobic oxidation of structurally diverse benzylic sp(3) C-H bonds of ethers and alkylarenes. The mild reaction conditions allow for the generation of synthetically and biologically valued isochromanones and xanthones from readily accessible alkyl aromatic precursors in good yields. PMID:26513695

  13. Ether-linked diglycerides inhibit vascular smooth muscle cell growth via decreased MAPK and PI3K/Akt signaling.

    PubMed

    Houck, Kristy L; Fox, Todd E; Sandirasegarane, Lakshman; Kester, Mark

    2008-10-01

    Diglycerides (DGs) are phospholipid-derived second messengers that regulate PKC-dependent signaling pathways. Distinct species of DGs are generated from inflammatory cytokines and growth factors. Growth factors increase diacyl- but not ether-linked DG species, whereas inflammatory cytokines predominately generate alkyl, acyl- and alkenyl, acyl-linked DG species in rat mesenchymal cells. These DG species have been shown to differentially regulate protein kinase C (PKC) isotypes. Ester-linked diacylglycerols activate PKC-epsilon and cellular proliferation in contrast to ether-linked DGs, which lead to growth arrest through the inactivation of PKC-epsilon. It is now hypothesized that ether-linked DGs inhibit mitogenesis through the inactivation of ERK and/or Akt signaling cascades. We demonstrate that cell-permeable ether-linked DGs reduce vascular smooth muscle cell growth by inhibiting platelet-derived growth factor-stimulated ERK in a PKC-epsilon-dependent manner. This inhibition is specific to the ERK pathway, since ether-linked DGs do not affect growth factor-induced activation of other family members of the MAPKs, including p38 MAPK and c-Jun NH(2)-terminal kinases. We also demonstrate that ether-linked DGs reduce prosurvival phosphatidylinositol 3-kinase (PI3K)/Akt signaling, independent of PKC-epsilon, by diminishing an interaction between the subunits of PI3K and not by affecting protein phosphatase 2A or lipid (phosphatase and tensin homologue deleted in chromosome 10) phosphatases. Taken together, our studies identify ether-linked DGs as potential adjuvant therapies to limit vascular smooth muscle migration and mitogenesis in atherosclerotic and restenotic models. PMID:18723771

  14. Flow-Induced Crystallization of Poly(ether ether ketone)

    NASA Astrophysics Data System (ADS)

    Nazari, Behzad; Rhoades, Alicyn; Colby, Ralph

    The effects of an interval of shear above the melting temperature Tm on subsequent isothermal crystallization below Tm is reported for the premier engineering thermoplastic, poly(ether ether ketone) (PEEK). The effect of shear on the crystallization rate of PEEK is investigated by means of rheological techniques and differential scanning calorimetry (DSC) under a protocol of imposing shear in a rotational cone and plate rheometer and monitoring crystallization after quenching. The rate of crystallization at 320 °C was not affected by shear for shear rates <7 s-1 at 350 °C, whereas intervals of adequate shear at higher shear rates prior to the quench to 320 °C accelerated crystallization significantly. As the duration of the interval of shear above 7 s-1 is increased, the crystallization time decreases but at each shear rate eventually saturates once the applied specific work exceeds ~120 MPa. The annealing of the flow-induced precursors was also investigated. The nuclei were fairly persistent at temperatures close to 350 °C, however very unstable at temperatures above 375 °C. This suggests that the nanostructures formed under shear might be akin to crystalline lamellae of greater thickness, compared to quiescently crystallized lamellae.

  15. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  16. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  17. 40 CFR 721.575 - Substituted alkyl halide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted alkyl halide. 721.575... Substances § 721.575 Substituted alkyl halide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as substituted alkyl halide (PMN P-83-1222)...

  18. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  19. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  20. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  1. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for...

  2. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs P-96... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl amino nitriles (generic)....

  3. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  4. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  5. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  6. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  7. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  8. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs P-96... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl amino nitriles (generic)....

  9. IONIC LIQUID-CATALYZED ALKYLATION OF ISOBUTANE WITH 2-BUTENE

    EPA Science Inventory

    A detailed study of the alkylation of isobutane with 2-butene in ionic liquid media has been conducted using 1-alkyl-3-methylimidazolium halides?aluminum chloride encompassing various alkyl groups (butyl-, hexyl-, and octyl-) and halides (Cl, Br, and I) on its cations and anions,...

  10. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Di-alkyl borane (generic). 721.1852... Substances § 721.1852 Di-alkyl borane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as di-alkyl borane (PMN P-00-1087) is...

  11. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  12. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Substituted alkyl phosphine oxide... Specific Chemical Substances § 721.10087 Substituted alkyl phosphine oxide (generic). (a) Chemical... as substituted alkyl phosphine oxide (PMN P-06-332) is subject to reporting under this section...

  13. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Disubstituted alkyl triazines (generic... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). (a) Chemical... as disubstituted alkyl triazines (PMNs P-85-932 and P-85-933) are subject to reporting under...

  14. 40 CFR 721.10506 - Alkylated phenols (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkylated phenols (generic). 721.10506... Substances § 721.10506 Alkylated phenols (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkylated phenols (PMNs...

  15. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  16. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  17. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  18. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  19. 40 CFR 721.5769 - Mixture of nitrated alkylated phenols.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Mixture of nitrated alkylated phenols... Substances § 721.5769 Mixture of nitrated alkylated phenols. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a mixture of nitrated alkylated...

  20. 40 CFR 721.10506 - Alkylated phenols (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkylated phenols (generic). 721.10506... Substances § 721.10506 Alkylated phenols (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkylated phenols (PMNs...

  1. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  2. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  3. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  4. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  5. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  6. 40 CFR 721.2410 - Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., alkyl sulfate salts. 721.2410 Section 721.2410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2410 Alkoxylated alkyldiethylenetriamine, alkyl sulfate salts. (a... generically as alkoxylated dialkyldiethylenetriamine, alkyl sulfate salts (PMN P-94-325, 326, and 327)...

  7. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  8. 40 CFR 721.2420 - Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., alkyl sulfate salt. 721.2420 Section 721.2420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2420 Alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt. (a... generically as an alkoxylated dialkyldiethylenetriamine, alkyl sulfate salt (PMN P-91-288) is subject...

  9. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  10. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl ester (generic name). 721.2825... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance alkyl ester (PMN P-84-968) is subject to reporting under this...

  11. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  12. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  13. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  14. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  15. 40 CFR 721.4136 - Alkyl heteropolycyclic-aniline (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl heteropolycyclic-aniline... Specific Chemical Substances § 721.4136 Alkyl heteropolycyclic-aniline (generic). (a) Chemical substance... alkyl heteropolycyclic-aniline (PMN P-00-0067) is subject to reporting under this section for...

  16. Synthesis and characterization of chitosan alkyl urea.

    PubMed

    Wang, Jing; Jiang, Ji-Zhou; Chen, Wei; Bai, Zheng-Wu

    2016-07-10

    Chitosan is a versatile material employed for various purposes in many fields including the development of chiral stationary phases for enantioseparation. Chitosan alkyl urea is a kind of intermediate used to prepare enantioseparation materials. In order to synthesize the intermediates, in the present work, a new way to prepare chitosan alkyl urea has been established: chitosan was first reacted with methyl chloroformate yielding N-methoxyformylated chitosan, which was then converted to chitosan alkyl urea through amine-ester exchange reaction. With a large excess of methyl chloroformate and primary amine of low stereohindrance, the amino group in chitosan could be almost completely converted to ureido group. The as-prepared chitosan alkyl urea derivatives were characterized by IR, (1)H NMR, (13)C NMR,(1)H-(1)H COSY and (1)H-(13)C HSQC NMR spectra. The chemical shifts of hydrogen and carbon atoms of glucose unit were assigned. It was found that the degree of substitution was obviously lower if cyclopropyl amine, aniline, tert-butyl amine and diethyl amine were used as reactants for the amine-ester exchange reaction. The reason was explained with the aid of theoretical calculations. PMID:27106154

  17. Poly(ethyleneoxide) functionalization through alkylation

    SciTech Connect

    Sivanandan, Kulandaivelu; Eitouni, Hany Basam; Li, Yan; Pratt, Russell Clayton

    2015-04-21

    A new and efficient method of functionalizing high molecular weight polymers through alkylation using a metal amide base is described. This novel procedure can also be used to synthesize polymer-based macro-initiators containing radical initiating groups at the chain-ends for synthesis of block copolymers.

  18. Separate olefin processing in sulfuric acid alkylation

    SciTech Connect

    Imhoff, S.A.; Graves, D.C.

    1995-09-01

    This paper will discuss the effects of alkylating propylene, butylenes and amylenes together and suggest alternative processing schemes which will minimize the negative synergies, improve octane and/or minimize acid consumption. The first option will show the impact of segregating the propylene and amylenes. In the second option, the benefit of alkylating the individual olefins at their optimal acid strengths will be presented. Additionally, each olefin`s optimal reaction conditions will be examined. Unfortunately, many refiners may not have the existing flexibility to take advantage of separate olefin processing. First, the majority of the propylene, butylenes and amylenes must be separate upon entry to the alkylation unit. If the olefins cannot be segregated upstream, separate olefin processing will not be as beneficial. If this is the case, then the benefits of separate olefin processing will have to be weighed versus the capital and energy costs required to separate them. In addition, small units may not have sufficient numbers of Contactors and settlers to achieve adequate segregation. Later in this paper, the modifications required in the alkylation unit for separate olefin processing will be discussed.

  19. N-Alkylated dinitrones from isosorbide as cross-linkers for unsaturated bio-based polyesters.

    PubMed

    Goerz, Oliver; Ritter, Helmut

    2014-01-01

    Isosorbide was esterified with acryloyl chloride and crotonic acid yielding isosorbide diacrylate (9a) and isosorbide dicrotonate (9b), which were reacted with benzaldehyde oxime in the presence of zinc(II) iodide and boron triflouride etherate as catalysts to obtain N-alkylated dinitrones 10a/b. Poly(isosorbide itaconite -co- succinate) 13 as a bio-based unsaturated polyester was cross-linked by a 1,3-dipolar cycloaddition with the received dinitrones 10a/b. The 1,3-dipolar cycloaddition led to a strong change of the mechanical properties which were investigated by rheological measurements. Nitrones derived from methyl acrylate (3a) and methyl crotonate (3b) were used as model systems and reacted with dimethyl itaconate to further characterize the 1,3-dipolaric cycloaddition. PMID:24991239

  20. N-Alkylated dinitrones from isosorbide as cross-linkers for unsaturated bio-based polyesters

    PubMed Central

    Goerz, Oliver

    2014-01-01

    Summary Isosorbide was esterified with acryloyl chloride and crotonic acid yielding isosorbide diacrylate (9a) and isosorbide dicrotonate (9b), which were reacted with benzaldehyde oxime in the presence of zinc(II) iodide and boron triflouride etherate as catalysts to obtain N-alkylated dinitrones 10a/b. Poly(isosorbide itaconite -co- succinate) 13 as a bio-based unsaturated polyester was cross-linked by a 1,3-dipolar cycloaddition with the received dinitrones 10a/b. The 1,3-dipolar cycloaddition led to a strong change of the mechanical properties which were investigated by rheological measurements. Nitrones derived from methyl acrylate (3a) and methyl crotonate (3b) were used as model systems and reacted with dimethyl itaconate to further characterize the 1,3-dipolaric cycloaddition. PMID:24991239

  1. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  2. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT....108 Ethyl ether. (a) Odor. Characteristic odor. (b) Specific gravity at 15.56 °/15.56 °C. Not...

  3. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  4. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  5. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  6. Purification of aqueous cellulose ethers

    SciTech Connect

    Bartscherer, K.A.; de Pablo, J.J.; Bonnin, M.C.; Prausnitz, J.M.

    1990-07-01

    Manufacture of cellulose ethers usually involves high amounts of salt by-products. For application of the product, salt must be removed. In this work, we have studied the injection of high-pressure CO{sub 2} into an aqueous polymer-salt solution; we find that upon addition of isopropanol in addition to CO{sub 2}, the solution separates into two phases. One phase is rich in polymer and water, and the other phase contains mostly isopropanol, water and CO{sub 2}. The salt distributes between the two phases, thereby offering interesting possibilities for development of a new purification process for water-soluble polymers. This work presents experimental phase-equilibrium data for hydroxyethyl cellulose and sodium carboxymethyl cellulose with sodium acetate and potassium sulfate, respectively, in the region 40{degree}C and 30 to 80 bar. Based on these data, we suggest a process for the manufacture and purification of water-soluble cellulose ethers. 15 refs., 14 figs., 9 tabs.

  7. Bacterial Utilization of Ether Glycols

    PubMed Central

    Fincher, Edward L.; Payne, W. J.

    1962-01-01

    A soil bacterium capable of using oligo- and polyethylene glycols and ether alcohols as sole sources of carbon for aerobic growth was isolated. The effects of substituent groups added to the ether bonds on the acceptability of the compounds as substrates were studied. Mechanisms for the incorporation of two-carbon compounds were demonstrated by the observation that acetate, glyoxylate, ethylene glycol, and a number of the tricarboxylic acid cycle intermediates served as growth substrates in minimal media. The rate of oxidation of the short-chained ethylene glycols by adapted resting cells varied directly with increasing numbers of two-carbon units in the chains from one to four. The amount of oxygen consumed per carbon atom of oligo- and polyethylene glycols was 100% of theoretical, but only 67% of theoretical for ethylene glycol. Resting cells oxidized oligo- and polyethylene glycols with 2 to 600 two-carbon units in the chains. Longer chained polyethylene glycols (up to 6,000) were oxidized at a very slow rate by these cells. Dehydrogenation of triethylene glycol by adapted cells was observed, coupling the reaction with methylene blue reduction. PMID:13945208

  8. How Does the Ionic Liquid Organizational Landscape Change when Nonpolar Cationic Alkyl Groups Are Replaced by Polar Isoelectronic Diethers?

    SciTech Connect

    Kashyap, Hemant K.; Santos, Cherry S.; Daly, Ryan P.; Hettige, Jeevapani J.; Murthy, N. Sanjeeva; Shirota, Hideaki; Edward W. Castner Jr.; Margulis, Claudio J.

    2012-12-21

    The X-ray scattering experiments and molecular dynamics simulations have been performed to investigate the structure of four room temperature ionic liquids (ILs) comprising the bis(trifluoromethylsulfonyl)amide (NTf2) anion paired with the triethyloctylammonium (N2228+) and triethyloctylphosphonium (P2228+) cations and their isoelectronic diether analogs, the (2-ethoxyethoxy)ethyltriethylammonium (N222(2O2O2)+) and (2-ethoxyethoxy)ethyltriethylphosphonium (P222(2O2O2)+) cations. Agreement between simulations and experiments is good and permits a clear interpretation of the important topological differences between these systems. The first sharp diffraction peak (or prepeak) in the structure function S(q) that is present in the case of the liquids containing the alkyl-substituted cations is absent in the case of the diether substituted analogs. Using different theoretical partitioning schemes for the X-ray structure function, we show that the prepeak present in the alkyl-substituted ILs arises from polarity alternations between charged groups and nonpolar alkyl tails. In the case of the diether substituted ILs, we find considerable curling of tails. Anions can be found with high probability in two different environments: close to the cationic nitrogen (phosphorus) and also close to the two ether groups. Moreover, for the two diether systems, anions are found in locations from which they are excluded in the alkyl-substituted systems. This removes the longer range (polar/nonpolar) pattern of alternation that gives rise to the prepeak in alkyl-substituted systems.

  9. Cross-Couplings Using Aryl Ethers via C-O Bond Activation Enabled by Nickel Catalysts.

    PubMed

    Tobisu, Mamoru; Chatani, Naoto

    2015-06-16

    Arene synthesis has been revolutionized by the invention of catalytic cross-coupling reactions, wherein aryl halides can be coupled with organometallic and organic nucleophiles. Although the replacement of aryl halides with phenol derivatives would lead to more economical and ecological methods, success has been primarily limited to activated phenol derivatives such as triflates. Aryl ethers arguably represent one of the most ideal substrates in terms of availability, cost, safety, and atom efficiency. However, the robust nature of the C(aryl)-O bonds of aryl ethers renders it extremely difficult to use them in catalytic reactions among the phenol derivatives. In 1979, Wenkert reported a seminal work on the nickel-catalyzed cross-coupling of aryl ethers with Grignard reagents. However, it was not until 2004 that the unique ability of a low-valent nickel species to activate otherwise unreactive C(aryl)-O bonds was appreciated with Dankwardt's identification of the Ni(0)/PCy3 system, which significantly expanded the efficiency of the Wenkert reaction. Application of the nickel catalyst to cross-couplings with other nucleophiles was first accomplished in 2008 by our group using organoboron reagents. Later on, several other nucleophiles, including organozinc reagents, amines, hydrosilane, and hydrogen were shown to be coupled with aryl ethers under nickel catalysis. Despite these advances, progress in this field is relatively slow because of the low reactivity of benzene derivatives (e.g., anisole) compared with polyaromatic substrates (e.g., methoxynaphthalene), particularly when less reactive and synthetically useful nucleophiles are used. The "naphthalene problem" has been overcome by the use of N-heterocyclic carbene (NHC) ligands bearing bulky N-alkyl substituents, which enables a wide range of aryl ethers to be coupled with organoboron nucleophiles. Moreover, the use of N-alkyl-substituted NHC ligands allows the use of alkynylmagnesium reagents, thereby realizing

  10. Cross-dehydrogenative coupling of α-C(sp(3))-H of ethers/alkanes with C(sp(2))-H of heteroarenes under metal-free conditions.

    PubMed

    Ambala, Srinivas; Thatikonda, Thanusha; Sharma, Shweta; Munagala, Gurunadham; Yempalla, Kushalava Reddy; Vishwakarma, Ram A; Singh, Parvinder Pal

    2015-12-14

    Here we have developed an effective metal-free dehydrogenative coupling method wherein α-oxyalkyl and alkyl radicals were generated from various ethers and alkanes to undergo coupling with a variety of electron-deficient heteroarenes such as un/substituted iso-quinolones, quinolines, pyridines, pyrazines and pyrimidines. The persulfate-acetone-water system was optimized for the dehydrogenative coupling with cyclic ethers which gave moderate to excellent yields of α-oxyalkyl containing heteroarenes. We have also optimized the conditions for coupling with cyclic alkanes and alicyclic ethers and demonstrated by conducting the reactions with a variety of electron-deficient heteroarenes. Further, the present method is also applicable to electron deficient arenes like naphthoquinones and moreover, it didn't require any external acid. PMID:26419479

  11. Semifluorinated polymers via cycloaddition and nucleophilic addition reactions of aromatic trifluorovinyl ethers

    NASA Astrophysics Data System (ADS)

    Iacono, Scott Thomas

    This dissertation encompasses the synthesis, characterization, and properties of semifluorinated polymers derived from thermal polymerization of aryl trifluorovinyl ether (TFVE) monomers. This work is divided into two parts based on the methodology of thermal polymerization using aryl TFVE monomers. The first part of this work involves the thermal [2 + 2] cyclodimerization of aryl TFVE monomers affording perfluorocyclobutyl (PFCB) aryl ether polymers. Chapter 1 provides an overview of PFCB aryl ether polymers as a next-generation class of high performance fluoropolymers that have been successfully employed for a myriad of technologies. PFCB aryl ether polymers are highly desired because of their high thermal stability, processability, and tailorability for specific material applications. Chapter 2 introduces a general perspective of polyhedral oligomeric silsesquioxanes (POSS) that were modified with PFCB aryl ether polymer for property enhancement, specifically for low surface energy materials. Chapter 3 and 4 show the synthesis, characterization, and properties of POSS modified PFCB aryl ether polymers as blends and a variety of copolymer architectures, respectively. The second portion of this dissertation focuses on the development of a new, facile step-growth polymerization of diols/bisphenols and aryl TFVEs to afford fluoroethylene/vinylene alkyl/aryl ether (FAE) polymers. Chapter 5 is a prelude to the development of FAE polymers which entails optimizing the methodology and mechanistic rationale of nucleophile addition to aryl TFVEs. Chapter 6 details the FAE polymerization kinetics, physical properties, and strategy for functionalization. Chapter 7 illustrates the modular modification of FAE polymers for the development of tunable light emissive materials for potential use as transport layer material for organic light emitting diodes (OLEDs) and also chemical sensors. Chapter 8 introduces postfunctionaliztion of FAE polymers resulting with sulfonated biaryl

  12. Ultra-bright alkylated graphene quantum dots

    NASA Astrophysics Data System (ADS)

    Feng, Lan; Tang, Xing-Yan; Zhong, Yun-Xin; Liu, Yue-Wen; Song, Xue-Huan; Deng, Shun-Liu; Xie, Su-Yuan; Yan, Jia-Wei; Zheng, Lan-Sun

    2014-10-01

    Highly efficient and stable photoluminescence (PL) are urgently desired for graphene quantum dots (GQDs) to facilitate their prospective applications as optical materials. Here, we report the facile and straightforward synthesis of alkylated graphene quantum dots (AGQDs) via the solvothermal reaction of propagatively alkylated graphene sheets (PAGenes). In contrast to most GQDs reported so far, the synthesized AGQDs process pH-independent and ultra-bright PL with a relative quantum yield of up to 65%. Structural and chemical composition characterization demonstrated that the synthesized AGQDs are nearly oxygen-defect-free with alkyl groups decorated on edges and basal plane, which may contribute to their greatly improved pH tolerance and high quantum efficiency. The photocatalytic performance of AGQDs-P25 nanocomposites was evaluated by the degradation of Rhodamine B under visible light. The photocatalytic rate is ca. 5.9 times higher than that of pure P25, indicating that AGQDs could harness the visible spectrum of sunlight for energy conversion or environmental therapy.Highly efficient and stable photoluminescence (PL) are urgently desired for graphene quantum dots (GQDs) to facilitate their prospective applications as optical materials. Here, we report the facile and straightforward synthesis of alkylated graphene quantum dots (AGQDs) via the solvothermal reaction of propagatively alkylated graphene sheets (PAGenes). In contrast to most GQDs reported so far, the synthesized AGQDs process pH-independent and ultra-bright PL with a relative quantum yield of up to 65%. Structural and chemical composition characterization demonstrated that the synthesized AGQDs are nearly oxygen-defect-free with alkyl groups decorated on edges and basal plane, which may contribute to their greatly improved pH tolerance and high quantum efficiency. The photocatalytic performance of AGQDs-P25 nanocomposites was evaluated by the degradation of Rhodamine B under visible light. The

  13. Synthesis and Characterization of Poly (Arylene Ether Benzimidazole) Oligomers

    NASA Technical Reports Server (NTRS)

    Leonard, Michael J.

    1995-01-01

    Several poly(arylene ether benzimidazole) oligomers were prepared by the nucleophilic aromatic substitution reaction of a bisphenol benzimidazole and various alkyl-substituted aromatic bisphenols with an activated aromatic dihalide in N, N-dimethylacetarnide. Moderate to high molecular weight terpolymers were obtained in all cases, as shown by their inherent viscosities, which ranged from 0.50 to 0.87 dL g(sup -1). Glass transition temperatures (T(sub g)s) of polymer powders ranged from 267-280 C. Air-dried unoriented thin film T(sub g)s were markedly lower than those of the powders, whereas T(sub g)s of films dried in a nitrogen atmosphere were identical to those of the corresponding powders. In addition, air-dried films were dark amber and brittle, whereas nitrogen-dried films were yellow and creasable. Nitrogen-dried films showed slightly higher thin-film tensile properties than the air-dried films, as well.

  14. Gold-Catalyzed Oxidation of Propargylic Ethers with Internal C-C Triple Bonds: Impressive Regioselectivity Enabled by Inductive Effect

    PubMed Central

    Ji, Kegong; D’Souza, Brendan; Nelson, Jon; Zhang, Liming

    2014-01-01

    Inductive perturbations of C-C triple bonds are shown to dictate the regiochemistry of gold-catalyzed oxidation of internal C-C triple bonds in the cases of propargylic ethers, resulting in highly regioselective formation of β-alkoxy-α,β-unsaturated ketones (up to >50/1 selectivity) via α-oxo gold carbene intermediates. Ethers derived from primary propargylic alcohols can be reliably transformed in good yields, and various functional groups are tolerated. With substrates derived from secondary propargylic alcohols, the development of a new P,N-bidentate ligand enables the minimization of competing alkyl group migration to the gold carbene center over the desired hydride migration; the preferred migration of a phenyl group, however, results in efficient formation of a α-phenyl-β-alkoxy-α,β-unsaturated ketone. These results further advance the surrogacy of a propargyl moiety to synthetically versatile enone function with reliable and readily predictable regioselectivity. PMID:25284890

  15. ALKYL PYROPHOSPHATE METAL SOLVENT EXTRACTANTS AND PROCESS

    DOEpatents

    Long, R.L.

    1958-09-30

    A process is presented for the recovery of uranium from aqueous mineral acidic solutions by solvent extraction. The extractant is a synmmetrical dialkyl pyrophosphate in which the alkyl substituents have a chain length of from 4 to 17 carbon atoms. Mentioned as a preferred extractant is dioctyl pyrophosphate. The uranium is precipitated irom the organic extractant phase with an agent such as HF, fluoride salts. alcohol, or ammonia.

  16. In pursuit of homoleptic actinide alkyl complexes.

    PubMed

    Seaman, Lani A; Walensky, Justin R; Wu, Guang; Hayton, Trevor W

    2013-04-01

    This Forum Article describes the pursuit of isolable homoleptic actinide alkyl complexes, starting with the pioneering work of Gilman during the Manhattan project. The initial reports in this area suggested that homoleptic uranium alkyls were too unstable to be isolated, but Wilkinson demonstrated that tractable uranium alkyls could be generated by purposeful "ate" complex formation, which serves to saturate the uranium coordination sphere and provide the complexes with greater kinetic stability. More recently, we reported the solid-state molecular structures of several homoleptic uranium alkyl complexes, including [Li(THF)4][U(CH2(t)Bu)5], [Li(TMEDA)]2[UMe6], [K(THF)]3[K(THF)2][U(CH2Ph)6]2, and [Li(THF)4][U(CH2SiMe3)6], by employing Wilkinson's strategy. Herein, we describe our attempts to extend this chemistry to thorium. The treatment of ThCl4(DME)2 with 5 equiv of LiCH2(t)Bu or LiCH2SiMe3 at -25 °C in THF affords [Th(CH2(t)Bu)5] (1) and [Li(DME)2][Th(CH2SiMe3)5 (2), respectively, in moderate yields. Similarly, the treatment of ThCl4(DME)2 with 6 equiv of K(CH2Ph) produces [K(THF)]2[Th(CH2Ph)6] (3), in good yield. Complexes 1-3 have been fully characterized, while the structures of 1 and 3 were confirmed by X-ray crystallography. Additionally, the electronic properties of 1 and 3 were explored by density functional theory. PMID:22716022

  17. Ultra-bright alkylated graphene quantum dots.

    PubMed

    Feng, Lan; Tang, Xing-Yan; Zhong, Yun-Xin; Liu, Yue-Wen; Song, Xue-Huan; Deng, Shun-Liu; Xie, Su-Yuan; Yan, Jia-Wei; Zheng, Lan-Sun

    2014-11-01

    Highly efficient and stable photoluminescence (PL) are urgently desired for graphene quantum dots (GQDs) to facilitate their prospective applications as optical materials. Here, we report the facile and straightforward synthesis of alkylated graphene quantum dots (AGQDs) via the solvothermal reaction of propagatively alkylated graphene sheets (PAGenes). In contrast to most GQDs reported so far, the synthesized AGQDs process pH-independent and ultra-bright PL with a relative quantum yield of up to 65%. Structural and chemical composition characterization demonstrated that the synthesized AGQDs are nearly oxygen-defect-free with alkyl groups decorated on edges and basal plane, which may contribute to their greatly improved pH tolerance and high quantum efficiency. The photocatalytic performance of AGQDs-P25 nanocomposites was evaluated by the degradation of Rhodamine B under visible light. The photocatalytic rate is ca. 5.9 times higher than that of pure P25, indicating that AGQDs could harness the visible spectrum of sunlight for energy conversion or environmental therapy. PMID:25192187

  18. Tartaric Acid-based Amphiphilic Macromolecules with Ether Linkages Exhibit Enhanced Repression of Oxidized Low Density Lipoprotein Uptake

    PubMed Central

    Abdelhamid, Dalia; Zhang, Yingue; Lewis, Daniel R.; Moghe, Prabhas V.; Welsh, William J.; Uhrich, Kathryn E.

    2015-01-01

    Cardiovascular disease initiates with the atherogenic cascade of scavenger receptor- (SR-) mediated oxidized low-density lipoprotein (oxLDL) uptake. Resulting foam cell formation leads to lipid-rich lesions within arteries. We designed amphiphilic macromolecules (AMs) to inhibit these processes by competitively blocking oxLDL uptake via SRs, potentially arresting atherosclerotic development. In this study, we investigated the impact of replacing ester linkages with ether linkages in the AM hydrophobic domain. We hypothesized that ether linkages would impart flexibility for orientation to improve binding to SR binding pockets, enhancing anti-atherogenic activity. A series of tartaric acid-based AMs with varying hydrophobic chain lengths and conjugation chemistries were synthesized, characterized, and evaluated for bioactivity. 3-D conformations of AMs in aqueous conditions may have significant effects on anti-atherogenic potency and were simulated by molecular modeling. Notably, ether-linked AMs exhibited significantly higher levels of inhibition of oxLDL uptake than their corresponding ester analogues, indicating a dominant effect of linkage flexibility on pharmacological activity. The degradation stability was also enhanced for ether-linked AMs. These studies further suggested that alkyl chain length (i.e., relative hydrophobicity), conformation (i.e., orientation), and chemical stability play a critical role in modulating oxLDL uptake, and guide the design of innovative cardiovascular therapies. PMID:25890704

  19. Coal anion structure and chemistry of coal alkylation. Final report, March 1, 1979-February 29, 1980

    SciTech Connect

    Stock, L.M.

    1980-01-01

    In accord with Task 1, some ether cleavage reactions were carried out in two different media - potassium/naphthalene/tetrahydrofuran and potassium/ ammonia - so that the merits and demerits of the two methods could be compared. Preliminary results suggest that both systems yield the same products, and that the ammonia medium is more convenient to work with, because of the absence of by-products such as reduced naphthalenes and tetralin. Dialkyl ethers were found to be least reactive compounds while the benzyl and phenyl ethers were found to be most reactive, as would be expected. The reductive alkylation of coal was carried out in ammonia at 25/sup 0/C. The tetrahydrofuran solubility of the reaction product was surprisingly low. We have obtained additional /sup 13/C)/sup 1/H) nmr data for tetrahydrofuran-soluble butylated coal and some model compounds; obtained additional Styragel(R) chromatography data of tetrahydrofuran-soluble coal labelled with 98%-enriched butyl-1,1-d/sub 2/ iodide; and obtained /sup 2/D nmr spectra of all the deuterium-labelled, tetrahydrofuran-soluble coal products. In accord with Task 4, we have undertaken a review of the information now available concerning the nature of Illinois No. 6 coal. Also, the effects of organic additives on the exchange reactions between tetralin-d/sub 12/ and diphenyl-methane and on the thermal cleavage reactions of several model compounds in tetralin were investigated to probe the relationship between structure and reactivity. The exchange reaction can be accelerated by coal, asphaltene-preasphaltene fractions derived from coal, compounds with labile bonds, or compounds which can be reduced readily. The pyridine-insoluble coal product, acids, and bases are inactive toward the exchange reaction.

  20. Solvent-induced crystallization of poly(ether ether ketone)

    NASA Astrophysics Data System (ADS)

    McPeak, Jennifer Lynne

    The purpose of this study was learn how the diffusion, swelling, and crystallization processes are coupled during solvent-induced crystallization of poly(ether ether ketone) (PEEK). Unoriented amorphous PEEK films were immersed in aprotic organic liquids at ambient temperature and bulk properties or characteristics were monitored as a function of immersion time. The sorption behavior, T g and Tm° suppression, crystallinity, and dynamic mechanical response were correlated as a function of solvent chemistry and immersion time. The saturation time of methylene chloride, 1,3-dichloropropane, tetrahydrofuran, cyclopentanone, chlorobenzene, toluene, diethyl ketone, and ethylbenzene in amorphous PEEK films were found to range from hours to days depending on the level of polymer-solvent interactions. In-situ isochronal DMA spectra show that the Tg of PEEK was suppressed from 150°C to below ambient temperature such that crystallization was kinetically feasible during ambient immersion. In addition, an increase in viscoelastic dispersion was attributed to the presence of crystallinity. From dynamic mass uptake and wide-angle x-ray diffraction (WAXD) results, it was found that the bulk sorption rate was equal to the bulk crystallization rate for all solvent systems that promoted SINC and PEEK exhibited diffusion-limited crystallization, irrespective of the nature of the transport mechanism. In addition, the solvent-induced crystals exhibit preferred orientation as supported by photographic WAXD. A distinct sorption front, observed with scanning electron microscopy, further supports the scenario of diffusion-controlled crystallization and one-dimensional diffusion. Isothermal DMA spectra for THF, cyclopentanone, and chlorobenzene, indicate that, as the solvent diffuses into the films, the stiffness of the polymer decreases at short times, begins to increase, and then reaches a relatively time-independent value. It was determined that the initial decrease in the storage

  1. Amphiphilic Cellulose Ethers Designed for Amorphous Solid Dispersion via Olefin Cross-Metathesis.

    PubMed

    Dong, Yifan; Mosquera-Giraldo, Laura I; Taylor, Lynne S; Edgar, Kevin J

    2016-02-01

    The design of cellulose ether-based amphiphiles has been difficult and limited because of the harsh conditions typically required for appending ether moieties to cellulose. Olefin cross-metathesis recently has been shown to be a valuable approach for appending a variety of functional groups to cellulose ethers and esters, provided that an olefin handle for metathesis can be attached. This synthetic pathway gives access to these functional derivatives under very mild conditions and at high efficiency. Modification of ethyl cellulose by metathesis to prepare useful derivatives, for example, for solubility and bioavailability enhancement of drugs by amorphous solid dispersion (ASD), has been limited by the low DS(OH) of commercial ethyl cellulose derivatives. This is problematic because ethyl cellulose is otherwise a very attractive substrate for synthesis of amphiphilic derivatives by olefin metathesis. Herein we explore two methods for opening up this design space for ether-based amphiphiles, for example, permitting synthesis of more hydrophilic derivatives. One approach is to start with the more hydrophilic commercial methyl cellulose, which contains much higher DS(OH) and therefore is better suited for introduction of high DS of olefin metathesis "handles". In another approach, we explored a homogeneous one-pot synthesis methodology from cellulose, where controlled DS of ethyl groups was introduced at the same time as the ω-unsaturated alkyl groups, thereby permitting complete control of DS(OH), DS(Et), and ultimately DS of the functional group added by metathesis. We describe the functionalized derivatives available by these successful approaches. In addition, we explore new methods for reduction of the unsaturation in initial metathesis products to provide robust methods for enhancing product stability against further radical-catalyzed reactions. We demonstrate initial evidence that the products show strong promise as amphiphilic matrix polymers for amorphous

  2. Phenylethynl-terminated poly(arylene ethers)

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor); Bryant, Robert G. (Inventor); Hergenrother, Paul M. (Inventor)

    1993-01-01

    Phenylethynyl-terminated poly(arylene ethers) are prepared in a wide range of molecular weights by adjusting monomer ratio and adding an appropriate amount of 4-fluoro- 4'-phenylethynyl benzophenone during polymer synthesis. The resulting phenylethynyl-terminated poly(arylene ethers) react and crosslink upon curing for one hour at 350 C to provide materials with improved solvent resistance, higher modulus, and better high temperature properties than the linear, uncrosslinked polymers.

  3. Imide/arylene ether copolymers. I

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Hergenrother, P. M.; Bass, R. G.

    1991-01-01

    The preparation of a series of novel imide/arylene ether copolymers is described together with the results of viscosity and DSC Tg(Tm) measurements. The copolymers were synthesized from an arylene ether block and either an amorphous or semicrystalline imide block. One block copolymer was end-capped, and the molecular weight was controlled to improve compression moldability. The paper also presents results of mechanical properties tests on copolymer samples.

  4. Mono- and Dialkyl Glycerol Ether Lipids in Anaerobic Bacteria: Biosynthetic Insights from the Mesophilic Sulfate Reducer Desulfatibacillum alkenivorans PF2803T

    PubMed Central

    Mollex, Damien; Vinçon-Laugier, Arnauld; Hakil, Florence; Pacton, Muriel; Cravo-Laureau, Cristiana

    2015-01-01

    Bacterial glycerol ether lipids (alkylglycerols) have received increasing attention during the last decades, notably due to their potential role in cell resistance or adaptation to adverse environmental conditions. Major uncertainties remain, however, regarding the origin, biosynthesis, and modes of formation of these uncommon bacterial lipids. We report here the preponderance of monoalkyl- and dialkylglycerols (1-O-alkyl-, 2-O-alkyl-, and 1,2-O-dialkylglycerols) among the hydrolyzed lipids of the marine mesophilic sulfate-reducing proteobacterium Desulfatibacillum alkenivorans PF2803T grown on n-alkenes (pentadec-1-ene or hexadec-1-ene) as the sole carbon and energy source. Alkylglycerols account for one-third to two-thirds of the total cellular lipids (alkylglycerols plus acylglycerols), depending on the growth substrate, with dialkylglycerols contributing to one-fifth to two-fifths of the total ether lipids. The carbon chain distribution of the lipids of D. alkenivorans also depends on that of the substrate, but the chain length and methyl-branching patterns of fatty acids and monoalkyl- and dialkylglycerols are systematically congruent, supporting the idea of a biosynthetic link between the three classes of compounds. Vinyl ethers (1-alken-1′-yl-glycerols, known as plasmalogens) are not detected among the lipids of strain PF2803T. Cultures grown on different (per)deuterated n-alkene, n-alkanol, and n-fatty acid substrates further demonstrate that saturated alkylglycerols are not formed via the reduction of hypothetic alken-1′-yl intermediates. Our results support an unprecedented biosynthetic pathway to monoalkyl/monoacyl- and dialkylglycerols in anaerobic bacteria and suggest that n-alkyl compounds present in the environment can serve as the substrates for supplying the building blocks of ether phospholipids of heterotrophic bacteria. PMID:25724965

  5. Mono- and dialkyl glycerol ether lipids in anaerobic bacteria: biosynthetic insights from the mesophilic sulfate reducer Desulfatibacillum alkenivorans PF2803T.

    PubMed

    Grossi, Vincent; Mollex, Damien; Vinçon-Laugier, Arnauld; Hakil, Florence; Pacton, Muriel; Cravo-Laureau, Cristiana

    2015-05-01

    Bacterial glycerol ether lipids (alkylglycerols) have received increasing attention during the last decades, notably due to their potential role in cell resistance or adaptation to adverse environmental conditions. Major uncertainties remain, however, regarding the origin, biosynthesis, and modes of formation of these uncommon bacterial lipids. We report here the preponderance of monoalkyl- and dialkylglycerols (1-O-alkyl-, 2-O-alkyl-, and 1,2-O-dialkylglycerols) among the hydrolyzed lipids of the marine mesophilic sulfate-reducing proteobacterium Desulfatibacillum alkenivorans PF2803T grown on n-alkenes (pentadec-1-ene or hexadec-1-ene) as the sole carbon and energy source. Alkylglycerols account for one-third to two-thirds of the total cellular lipids (alkylglycerols plus acylglycerols), depending on the growth substrate, with dialkylglycerols contributing to one-fifth to two-fifths of the total ether lipids. The carbon chain distribution of the lipids of D. alkenivorans also depends on that of the substrate, but the chain length and methyl-branching patterns of fatty acids and monoalkyl- and dialkylglycerols are systematically congruent, supporting the idea of a biosynthetic link between the three classes of compounds. Vinyl ethers (1-alken-1'-yl-glycerols, known as plasmalogens) are not detected among the lipids of strain PF2803T. Cultures grown on different (per)deuterated n-alkene, n-alkanol, and n-fatty acid substrates further demonstrate that saturated alkylglycerols are not formed via the reduction of hypothetic alken-1'-yl intermediates. Our results support an unprecedented biosynthetic pathway to monoalkyl/monoacyl- and dialkylglycerols in anaerobic bacteria and suggest that n-alkyl compounds present in the environment can serve as the substrates for supplying the building blocks of ether phospholipids of heterotrophic bacteria. PMID:25724965

  6. Lithium perchlorate-nitromethane-promoted alkylation of anilines with arylmethanols.

    PubMed

    Zhou, Jun; Mao, Hai-Feng; Wang, Lu; Zou, Jian-Ping; Zhang, Wei

    2011-11-01

    A new application of lithium perchlorate-nitromethane (LPNM) for the formation of aromatic C-N and C-C bonds is introduced. LPNM-promoted reactions of anilines with diarylmethanols selectively generate N-alkylated anilines or mono and double Friedel-Crafts alkylation products under different conditions by changing the reaction time, reaction temperature, and the ratio of the reactants. This method does not require the use of transition metal catalysts to prepare alkylated aniline derivatives. PMID:21547437

  7. Anaerobic biodegradation of ether compounds by ether bond-cleaving bacteria and methanogenic consortia

    SciTech Connect

    Dwyer, D.F.

    1989-01-01

    Ether compounds are manufactured for use in nonionic detergents, plastics, pesticides and other products and occur as toxic organic compounds, the most famous being tetrachlorodibenzo-p-dioxin. Ether compounds were considered recalcitrant to anaerobic biodegradation due to the lack of an appropriate oxidant for ether bond-cleavage in reducing environments. Many of these compounds reside in anaerobic environments or are exposed to anaerobic waste treatment processes. Thus, it is of interest to identify: (i) whether ether compounds are anaerobically biodegradable, (ii) the anaerobic microorganisms able to degrade these compounds, and (iii) the mechanism(s) of anaerobic ether bond-cleavage. The ether bonds of polyethylene glycol (PEG; HO-(CH{sub 2}CH{sub 2}-O-){sub n}H), phenyl ether ((C{sub 6}H{sub 5}){sub 2}O), and dibenzo-p-dioxin ((C{sub 6}H{sub 4}){sub 2}O{sub 2}) were shown to be degraded in methanogenic consortia enriched with these compounds and polyethoxylate (nonionic) surfactants as substrates. Two anaerobic microorganisms which used PEGs as sole substrates were isolated and characterized. Desulfovibrio desulfuricans strain DG2 degraded the monomer ethylene glycol and oligomers up to tetraethylene glycol (HO-(CH{sub 2}CH{sub 2}-O-){sub 4}H) in length. Bacteroides sp. strain PG1 degraded diethylene glycol and all other polymer lengths of PEG. PEGs were degraded by Bacteroides sp. strain PG1 via an external depolymerization which was either a hydrolytic or a reductive cleavage of the ether bond. The ether bond of diaryl ethers was apparently cleaved by a reductive mechanism which produced benzene and phenol as products from phenyl ether degradation and benzene and, by indirect analysis, catechol from dibenzo-dioxin.

  8. Efficient cross-coupling of aryl Grignard reagents with alkyl halides by recyclable ionic iron(III) complexes bearing a bis(phenol)-functionalized benzimidazolium cation.

    PubMed

    Xia, Chong-Liang; Xie, Cun-Fei; Wu, Yu-Feng; Sun, Hong-Mei; Shen, Qi; Zhang, Yong

    2013-12-14

    A novel bis(phenol)-functionalized benzimidazolium salt, 1,3-bis(3,5-di-tert-butyl-2-hydroxybenzyl)benzimidazolium chloride (H3LCl, 1), was designed and used to prepare ionic iron(III) complexes of the type [H3L][FeX4] (X = Cl, 2; X = Br, 3). Both 2 and 3 were characterized by elemental analysis, Raman spectroscopy, electrospray ionization mass spectrometry and X-ray crystallography. The catalytic performances of 2 and 3 in cross-coupling reactions using aryl Grignard reagents with primary and secondary alkyl halides bearing β-hydrogens were studied. This analysis shows that complex 2 has good potential for alkyl chloride-mediated coupling. In comparison, complex 3 showed slightly lower catalytic activity. After decanting the product contained in the ethereal layer, complex 2 could be recycled at least eight times without significant loss of catalytic activity. PMID:24145602

  9. Determining cysteine oxidation status using differential alkylation

    NASA Astrophysics Data System (ADS)

    Schilling, Birgit; Yoo, Chris B.; Collins, Christopher J.; Gibson, Bradford W.

    2004-08-01

    Oxidative damage to proteins plays a major role in aging and in the pathology of many degenerative diseases. Under conditions of oxidative stress, reactive oxygen and nitrogen species can modify key redox sensitive amino acid side chains leading to altered biological activities or structures of the targeted proteins. This in turn can affect signaling or regulatory control pathways as well as protein turnover and degradation efficiency in the proteasome. Cysteine residues are particularly susceptible to oxidation, primarily through reversible modifications (e.g., thiolation and nitrosylation), although irreversible oxidation can lead to products that cannot be repaired in vivo such as sulfonic acid. This report describes a strategy to determine the overall level of reversible cysteine oxidation using a stable isotope differential alkylation approach in combination with mass spectrometric analysis. This method employs 13C-labeled alkylating reagents, such as N-ethyl-[1,4-13C2]-maleimide, bromo-[1,2-13C2]-acetic acid and their non-labeled counterparts to quantitatively assess the level of cysteine oxidation at specific sites in oxidized proteins. The differential alkylation protocol was evaluated using standard peptides and proteins, and then applied to monitor and determine the level of oxidative damage induced by diamide, a mild oxidant. The formation and mass spectrometric analysis of irreversible cysteine acid modification will also be discussed as several such modifications have been identified in subunits of the mitochondrial electron transport chain complexes. This strategy will hopefully contribute to our understanding of the role that cysteine oxidation plays in such chronic diseases such as Parkinson's disease, where studies in animal and cell models have shown oxidative damage to mitochondrial Complex I to be a specific and early target.

  10. Alkyl Chlorides as Hydrogen Bond Acceptors

    SciTech Connect

    Nadas, Janos I; Vukovic, Sinisa; Hay, Benjamin

    2012-01-01

    To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

  11. O–H hydrogen bonding promotes H-atom transfer from a C–H bonds for C-alkylation of alcohols

    PubMed Central

    Jeffrey, Jenna L.; Terrett, Jack A.; MacMillan, David W. C.

    2015-01-01

    The efficiency and selectivity of hydrogen atom transfer from organic molecules are often difficult to control in the presence of multiple potential hydrogen atom donors and acceptors. Here, we describe the mechanistic evaluation of a mode of catalytic activation that accomplishes the highly selective photoredox α-alkylation/lactonization of alcohols with methyl acrylate via a hydrogen atom transfer mechanism. Our studies indicate a particular role of tetra-n-butylammonium phosphate in enhancing the selectivity for α C–H bonds in alcohols in the presence of allylic, benzylic, α-C=O, and α-ether C–H bonds. PMID:26316601

  12. Conformations and Barriers to Methyl Group Internal Rotation in Two Asymmetric Ethers: Propyl Methyl Ether and Butyl Methyl Ether

    NASA Astrophysics Data System (ADS)

    Long, B. E.; Dechirico, F.; Cooke, S. A.

    2012-06-01

    The conformational preferences of the O-C-C-C unit are important in many biological systems with the unit generally preferring a gauche configuration compared to an anti configuration. Butyl methyl ether and propyl methyl ether provide very simple systems for this phenomenom to manifest. Pure rotational spectra of the title molecules have been recorded using chirped pulse Fourier transform microwave spectroscopy (CP-FTMW). In the case of butyl methyl ether, only one conformer has been observed. This conformer has torsional angles of COCC = 180°, OCCC = 62° and CCCC = 180° (anti-gauche-anti) and rotational constants of A = 10259.4591(33) MHz, B = 1445.6470(13) MHz, and C = 1356.2944(14) MHz. The rotational spectrum was doubled and has been analyzed to produce an effective barrier to methyl group internal rotation of 780(35) cm-1. A prior rotational spectroscopic study on propyl methyl ether had focused only on the high energy anti-anti conformer. We have analyzed spectra from the lowest energy anti-gauche conformer and the spectroscopic constants will be presented. A summary of the differences in conformational energies and methyl group internal rotation barriers for the class of aliphatic asymmetric ethers will be presented. K. N. Houk, J. E. Eksterowicz, Y.-D. Wu, C. D. Fuglesang, D. B. Mitchell. J. Am. Chem. Soc. 115 (4170), 1993. Hiroshi Kato, Jun Nakagawa, Michiro Hayashi. J. Mol. Spectrosc. 80 (272), 1980.

  13. Process for the production of ethylidene diacetate from dimethyl ether using a heterogeneous catalyst

    DOEpatents

    Ramprasad, Dorai; Waller, Francis Joseph

    1998-01-01

    This invention relates to a process for producing ethylidene diacetate by the reaction of dimethyl ether, acetic acid, hydrogen and carbon monoxide at elevated temperatures and pressures in the presence of an alkyl halide and a heterogeneous, bifunctional catalyst that is stable to hydrogenation and comprises an insoluble polymer having pendant quaternized heteroatoms, some of which heteroatoms are ionically bonded to anionic Group VIII metal complexes, the remainder of the heteroatoms being bonded to iodide. In contrast to prior art processes, no accelerator (promoter) is necessary to achieve the catalytic reaction and the products are easily separated from the catalyst by filtration. The catalyst can be recycled for 3 consecutive runs without loss in activity.

  14. Reactivity of hydroxy- and aquo(hydroxy)-λ3-iodane-crown ether complexes.

    PubMed

    Miyamoto, Kazunori; Yokota, Yukie; Suefuji, Takashi; Yamaguchi, Kentaro; Ozawa, Tomoyuki; Ochiai, Masahito

    2014-04-25

    We have designed a series of hydroxy(aryl)-λ(3)-iodane-[18]crown-6 complexes, prepared from the corresponding iodosylbenzene derivatives and superacids in the presence of [18]crown-6, and have investigated their reactivities in aqueous media. These activated iodosylbenzene monomers are all non-hygroscopic shelf-storable reagents, but they maintain high oxidizing ability in water. The complexes are effective for the oxidation of phenols, sulfides, olefins, silyl enol ethers, and alkyl(trifluoro)borates under mild conditions. Furthermore, hydroxy-λ(3)-iodane-[18]crown-6 complexes serve as efficient progenitors for the synthesis of diaryl-, vinyl-, and alkynyl-λ(3)-iodanes in water. Other less polar organic solvents, such as methanol, acetonitrile, and dichloromethane, are also usable in some cases. PMID:24644216

  15. Process for the production of ethylidene diacetate from dimethyl ether using a heterogeneous catalyst

    DOEpatents

    Ramprasad, D.; Waller, F.J.

    1998-04-28

    This invention relates to a process for producing ethylidene diacetate by the reaction of dimethyl ether, acetic acid, hydrogen and carbon monoxide at elevated temperatures and pressures in the presence of an alkyl halide and a heterogeneous, bifunctional catalyst that is stable to hydrogenation and comprises an insoluble polymer having pendant quaternized heteroatoms, some of which heteroatoms are ionically bonded to anionic Group VIII metal complexes, the remainder of the heteroatoms being bonded to iodide. In contrast to prior art processes, no accelerator (promoter) is necessary to achieve the catalytic reaction and the products are easily separated from the catalyst by filtration. The catalyst can be recycled for 3 consecutive runs without loss in activity.

  16. Determination of surfactant sodium lauryl ether sulfate by ion pairing chromatography with suppressed conductivity detection

    SciTech Connect

    Ye, M.Y.; Walkup, R.G.; Hill, K.D. )

    1994-01-01

    A method for the determination of the anionic Steol CS-330 surfactant is described. CS-330 is a complex mixture of oligomers due to the various sizes of fatty alcohols and the number of moles of the ethoxylation. The main component of CS-330 is sodium lauryl ether sulfate (SLES). Since a SLES molecule has a hydrophilic sulfate head and a hydrophobic alkyl ethoxyl tail, it is very difficult to separate these molecules with conventional reverse phase chromatography or ion exchange chromatography. This work uses ion pairing chromatography with suppressed conductivity detection. The separation of oligomers in CS-330 is achieved. SLES does not have UV-absorbing chromophores, therefore an optical detector is not very sensitive. Suppressed conductivity detection technique significantly increases sensitivity and a quantitation limit of 56.60 ppm is achieved.

  17. Four 3-cyanodifurazanyl ethers: potential propellants.

    PubMed

    Averkiev, Boris B; Antipin, Mikhail Yu; Sheremetev, Aleksey B; Timofeeva, Tatiana V

    2003-07-01

    In earlier papers, we described the synthesis and structures of bis(3-nitrofurazan-4-yl) ether, C(4)N(6)O(7), (I), bis[3-(nitro-N,N,O-azoxy)furazan-4-yl] ether, C(4)N(10)O(9), (II), and bis[3-(5H-[1,2,3]triazolo[4,5-c]furazan-5-yl)furazan-4-yl] ether, C(8)N(14)O(5), (III). Here we compare the structures of (I)-(III) with those of four 3-cyanodifurazanyl ethers, namely bis(3-cyanofurazan-4-yl) ether, C(6)N(6)O(3), (IV), 3-cyanofurazanyl 3-nitrofurazanyl ether, C(5)N(6)O(5), (V), 3,4-bis(3-cyanofurazan-4-yloxy)furazan, C(8)N(8)O(5), (VI), and bis[3-(3-cyanofurazan-4-yloxy)furazan-4-yl]diazene, C(10)N(12)O(6), (VII). It was found that the geometric parameters of the difurazanyl ether fragments are similar in these structures and therefore not influenced by substituent effects; however, the conformation of this fragment is different, viz. structures (I), (III), (V) and (VI) have approximate C(2) symmetry, and structures (II), (IV) and (VII) have C(s) symmetry. Dense crystal packing (1.626-1.898 Mg m(-3)) is characteristic for all these hydrogen-free compounds. A linear correlation is also determined between crystal density and 'molecular density' (M/V), where M is the mass of a molecule and V is the molecular volume. PMID:12855864

  18. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  19. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  20. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  1. 40 CFR 721.10218 - 2-Propenoic acid, 2-mehtyl-, C12-15-branched and linear alkyl esters, telomers with alkyl 2...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-branched and linear alkyl esters, telomers with alkyl 2- thio]-2-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated (generic). 721.10218 Section 721.10218...-alkanoate, aminoalkyl methacrylate and alkyl methacrylate, tert-Bu 2-ethylhexanoperoxoate-initiated...

  2. Stereospecific nickel-catalyzed cross-coupling reactions of benzylic ethers and esters.

    PubMed

    Tollefson, Emily J; Hanna, Luke E; Jarvo, Elizabeth R

    2015-08-18

    This Account presents the development of a suite of stereospecific alkyl-alkyl cross-coupling reactions employing nickel catalysts. Our reactions complement related nickel-catalyzed stereoconvergent cross-coupling reactions from a stereochemical and mechanistic perspective. Most reactions of alkyl electrophiles with low-valent nickel complexes proceed through alkyl radicals and thus are stereoablative; the correct enantioselective catalyst can favor the formation of one enantiomer. Our reactions, in contrast, are stereospecific. Enantioenriched ethers and esters are cleanly converted to cross-coupled products with high stereochemical fidelity. While mechanistic details are still to be refined, our results are consistent with a polar, two-electron oxidative addition that avoids the formation of radical intermediates. This reactivity is unusual for a first-row transition metal. The cross-coupling reactions engage a range of benzylic ethers and esters, including methyl ethers, tetrahydropyrans, tetrahydrofurans, esters, and lactones. Coordination of the arene substituent to the nickel catalyst accelerates the reactions. Arenes with low aromatic stabilization energies, such as naphthalene, benzothiophene, and furan, serve as the best ligands and provide the highest reactivity. Traceless directing groups that accelerate reactions of sluggish substrates are described, providing partial compensation for arene coordination. Kumada, Negishi, and Suzuki reactions provide incorporation of a broad range of transmetalating agents. In Kumada coupling reactions, a full complement of Grigard reagents, including methyl, n-alkyl, and aryl Grignard reagents, are employed. In reactions employing methylmagnesium iodide, ligation of the nickel catalyst by rac-BINAP or DPEphos provides the highest yield and stereospecificity. For all other Grignard reagents, Ni(dppe)Cl2 has emerged as the best catalyst. Negishi cross-coupling reactions employing dimethylzinc are reported as a strategy to

  3. ESCHERICHIA COLI Gene Induction by Alkylation Treatment

    PubMed Central

    Volkert, Michael R.; Nguyen, Dinh C.; Beard, K. Christopher

    1986-01-01

    Searches for alkylation-inducible (aid) genes of Escherichia coli have been conducted by screening random fusions of the Mu-dl(ApR lac) phage for fusions showing increased β-galactosidase activity after treatment with methylating agents, but not after treatments with UV-irradiation. In this report we describe gene fusions that are specifically induced by alkylation treatments. Nine new mutants are described, and their properties are compared with the five mutants described previously. The total of 14 fusion mutants map at five distinct genetic loci. They can be further subdivided on the basis of their induction by methyl methanesulfonate (MMS) and N-methyl-N'-nitro-N-nitrosoguanidine (MNNG). alkA, aidB and aidD are induced by both agents and appear to be regulated by ada. Neither aidC nor aidI is regulated by ada. Moreover, since aidC is induced only by MNNG and aidI is induced only by MMS, these two genes are likely to be individually regulated. Thus, there appear to be at least three different regulatory mechanisms controlling aid genes. PMID:3080354

  4. The photodissociation dynamics of alkyl radicals

    NASA Astrophysics Data System (ADS)

    Giegerich, Jens; Fischer, Ingo

    2015-01-01

    The photodisscociation dynamics of the alkyl radicals i-propyl (CH(CH3)2) and t-butyl (C(CH3)3) are investigated by H-atom photofragment imaging. While i-propyl is excited at 250 nm, the photodynamics of t-butyl are explored over a large energy range using excitation wavelengths between 347 nm and 233 nm. The results are compared to those obtained previously for ethyl, CH3CH2, and to those reported for t-butyl using 248 nm excitation. The translational energy (ET) distribution of the H-atom photofragments is bimodal and appears rather similar for all three radicals. The low ET part of the distribution shows an isotropic photofragment angular distribution, while the high ET part is associated with a considerable anisotropy. Thus, for t-butyl, two H-atom loss channels of roughly equal importance have been identified in addition to the CH3-loss channel reported previously. A mechanism for the photodissociation of alkyl radicals is suggested that is based on interactions between Rydberg- and valence states.

  5. The photodissociation dynamics of alkyl radicals

    SciTech Connect

    Giegerich, Jens; Fischer, Ingo

    2015-01-28

    The photodisscociation dynamics of the alkyl radicals i-propyl (CH(CH{sub 3}){sub 2}) and t-butyl (C(CH{sub 3}){sub 3}) are investigated by H-atom photofragment imaging. While i-propyl is excited at 250 nm, the photodynamics of t-butyl are explored over a large energy range using excitation wavelengths between 347 nm and 233 nm. The results are compared to those obtained previously for ethyl, CH{sub 3}CH{sub 2}, and to those reported for t-butyl using 248 nm excitation. The translational energy (E{sub T}) distribution of the H-atom photofragments is bimodal and appears rather similar for all three radicals. The low E{sub T} part of the distribution shows an isotropic photofragment angular distribution, while the high E{sub T} part is associated with a considerable anisotropy. Thus, for t-butyl, two H-atom loss channels of roughly equal importance have been identified in addition to the CH{sub 3}-loss channel reported previously. A mechanism for the photodissociation of alkyl radicals is suggested that is based on interactions between Rydberg- and valence states.

  6. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  7. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  8. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  9. Clinical applications of quinone-containing alkylating agents.

    PubMed

    Begleiter, A

    2000-11-01

    Quinone-containing alkylating agents are a class of chemical agents that have received considerable interest as anticancer drugs. These agents contain a quinone moiety that can be reduced and an alkylating group that can form covalent bonds with a variety of cellular components. The oxidation state of the quinone element can modulate the activity of the alkylating element, and reduction of the quinone is required for activation of the alkylating activity of many of these agents. The quinone element may also contribute to the cytotoxic activity of quinone-containing alkylating agents through the formation of reactive oxygen species during redox cycling. The natural product, mitomycin C, has been the most widely used quinone-containing alkylating agent in the clinic, but other quinone-containing alkylating agents like porfiromycin, diaziquone, carbazilquinone, triaziquone and EO9 have also been used in the clinic for the treatment of cancer. In addition, many other quinone-containing alkylating agents have been tested in preclinical studies and the development of new agents is being actively pursued. This chapter describes the current and past clinical uses of these agents in the treatment of cancer and discusses new agents that are currently in clinical trials. PMID:11056078

  10. 40 CFR 721.10073 - Modified alkyl acrylamide (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified alkyl acrylamide (generic... Specific Chemical Substances § 721.10073 Modified alkyl acrylamide (generic). (a) Chemical substance and... acrylamide (PMN P-05-536) is subject to reporting under this section for the significant new uses...

  11. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  12. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  13. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  14. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  15. 40 CFR 721.840 - Alkyl substituted diaromatic hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... hydrocarbons. 721.840 Section 721.840 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.840 Alkyl substituted diaromatic hydrocarbons. (a) Chemical substance... alkyl substituted di-aro-matic hydrocarbons (PMN P-91-710) is subject to reporting under this...

  16. 40 CFR 721.9515 - Aminofunctional alkoxy alkyl siloxane.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Aminofunctional alkoxy alkyl siloxane... Substances § 721.9515 Aminofunctional alkoxy alkyl siloxane. (a) Chemical substance and significant new uses... siloxane (PMN P-96-346) is subject to reporting under this section for the significant new uses...

  17. 40 CFR 721.9515 - Aminofunctional alkoxy alkyl siloxane.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aminofunctional alkoxy alkyl siloxane... Substances § 721.9515 Aminofunctional alkoxy alkyl siloxane. (a) Chemical substance and significant new uses... siloxane (PMN P-96-346) is subject to reporting under this section for the significant new uses...

  18. 40 CFR 721.9515 - Aminofunctional alkoxy alkyl siloxane.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Aminofunctional alkoxy alkyl siloxane... Substances § 721.9515 Aminofunctional alkoxy alkyl siloxane. (a) Chemical substance and significant new uses... siloxane (PMN P-96-346) is subject to reporting under this section for the significant new uses...

  19. 40 CFR 721.9515 - Aminofunctional alkoxy alkyl siloxane.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Aminofunctional alkoxy alkyl siloxane... Substances § 721.9515 Aminofunctional alkoxy alkyl siloxane. (a) Chemical substance and significant new uses... siloxane (PMN P-96-346) is subject to reporting under this section for the significant new uses...

  20. 40 CFR 721.9515 - Aminofunctional alkoxy alkyl siloxane.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Aminofunctional alkoxy alkyl siloxane... Substances § 721.9515 Aminofunctional alkoxy alkyl siloxane. (a) Chemical substance and significant new uses... siloxane (PMN P-96-346) is subject to reporting under this section for the significant new uses...

  1. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  2. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  3. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  4. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  5. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  6. Alkylation of refinery C5 streams to lower gasoline volatility

    SciTech Connect

    Cronkright, W.A.; Ditz, J.M.; Newsome, D.S. ); Lerner, H. ); Schorfheide, J.J. ); Libbers, D.D. )

    1994-01-01

    A pilot plant program was carried out to provide precise information about the sulfuric acid alkylation of refinery C5 streams under conditions found in commercial operation of the Exxon stirred, autorefrigerated alkylation process. The study used isobutane to alkylate the full range of pentenes in a C5 cut from an FCC unit as well as the linear olefin concentrate in the raffinate that would be obtained after processing this cut in a TAME unit. A few experiments were conducted with a mixture of C5 olefins matching the composition of the refinery feed in order to highlight the effect of impurities. The results showed that hydrocarbon impurities are a principal factor causing the high acid consumption values reported for pentene alkylation. The results also demonstrated that operating variables that affect acid consumption and alkylate quality in butene alkylation produce directionally similar effects in pentene alkylation, but of different magnitude. It is concluded that sulfur acid alkylation of pentenes produces an excellent isoparaffinic blending stock for the gasoline pool while eliminating volatile olefins and reducing gasoline RVP. Combined with the TAME process, a scheme for adding oxygen and achieving maximum RVP reduction at the same time is realized.

  7. Degradable Polymer Composites Fabricated from Starch and Alkyl Cyanoacrylate Monomer

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Degradable polymer composites are fabricated from alkyl cyanoacrylate monomer and starch without special equipment. Alkyl cyanoacrylate, which is a major component of “super glue”, is a monomer that polymerizes at room temperature in the presence of initiators. During the fabrication of polymer com...

  8. 40 CFR 721.8700 - Halogenated alkyl pyridine.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogenated alkyl pyridine. 721.8700 Section 721.8700 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.8700 Halogenated alkyl...

  9. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl ester (generic name). 721.2825 Section 721.2825 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject...

  10. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl ester (generic name). 721.2825 Section 721.2825 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject...

  11. 40 CFR 721.2560 - Alkylated diphenyl oxide (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkylated diphenyl oxide (generic name). 721.2560 Section 721.2560 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... Substances § 721.2560 Alkylated diphenyl oxide (generic name). (a) Chemical substance and significant...

  12. 40 CFR 721.9720 - Disubstituted alkyl triazines (generic name).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Disubstituted alkyl triazines (generic name). 721.9720 Section 721.9720 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.9720 Disubstituted alkyl triazines (generic name). (a)...

  13. 40 CFR 721.2560 - Alkylated diphenyl oxide (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkylated diphenyl oxide (generic name). 721.2560 Section 721.2560 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... Substances § 721.2560 Alkylated diphenyl oxide (generic name). (a) Chemical substance and significant...

  14. 40 CFR 721.2825 - Alkyl ester (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl ester (generic name). 721.2825 Section 721.2825 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES... Substances § 721.2825 Alkyl ester (generic name). (a) Chemical substance and significant new uses subject...

  15. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Alkyl ketene dimers. 176.120 Section 176.120 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS Substances for Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers....

  16. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkali metal alkyl...

  17. 40 CFR 721.1852 - Di-alkyl borane (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Di-alkyl borane (generic). 721.1852 Section 721.1852 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.1852 Di-alkyl borane...

  18. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  19. 40 CFR 721.2155 - Alkoxyamino-alkyl-coumarin (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkoxyamino-alkyl-coumarin (generic... Substances § 721.2155 Alkoxyamino-alkyl-coumarin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as...

  20. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS Substances for Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may be safely used as a component of articles intended for use in producing, manufacturing,...

  1. 21 CFR 176.120 - Alkyl ketene dimers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: PAPER AND PAPERBOARD COMPONENTS Substances for Use Only as Components of Paper and Paperboard § 176.120 Alkyl ketene dimers. Alkyl ketene dimers may be safely used as a component of articles intended for use in producing, manufacturing,...

  2. 1-vinyl-4-alkyl-1,2,4-triazolium salts

    SciTech Connect

    Ermakova, T.G.; Chipanina, N.N.; Gritza, A.I.; Kuznetsova, N.P.; Lopyrev, V.A.; Tatarova, L.A.

    1985-04-01

    Quaternary salts based on 1-vinyl-1,2,4-triazole have been synthesized. Alkyl iodides and bromides and dimethyl sulfate served as the quaternizing agent. Polymeric quaternary salts of 1-vinyl-1,2,4-triazole have been obtained by alkylation of its polymer.

  3. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  4. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  5. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  6. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  7. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  8. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  9. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  10. Microwave-assisted synthesis of alkyl cellulose in aqueous medium

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Alkyl celluloses are commercial products that are made typically in an alcohol medium over the course of several hours. In this work an alternative, simplified synthesis of alkyl cellulose is reported, using microwave irradiation and aqueous alkaline medium. No alcohol is needed during the reaction....

  11. 40 CFR 721.10317 - Alkyl phosphate derivative (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phosphate derivative (generic... Specific Chemical Substances § 721.10317 Alkyl phosphate derivative (generic). (a) Chemical substance and... phosphate derivative (PMN P-02-1040) is subject to reporting under this section for the significant new...

  12. 40 CFR 721.10317 - Alkyl phosphate derivative (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl phosphate derivative (generic... Specific Chemical Substances § 721.10317 Alkyl phosphate derivative (generic). (a) Chemical substance and... phosphate derivative (PMN P-02-1040) is subject to reporting under this section for the significant new...

  13. 40 CFR 721.10317 - Alkyl phosphate derivative (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl phosphate derivative (generic... Specific Chemical Substances § 721.10317 Alkyl phosphate derivative (generic). (a) Chemical substance and... phosphate derivative (PMN P-02-1040) is subject to reporting under this section for the significant new...

  14. Ni-Catalyzed C-C Couplings Using Alkyl Electrophiles.

    PubMed

    Iwasaki, Takanori; Kambe, Nobuaki

    2016-10-01

    Much effort has been devoted to developing new methods using Ni catalysts for the cross-coupling reaction of alkyl electrophiles with organometallic reagents, and significant achievements in this area have emerged during the past two decades. Nickel catalysts have enabled the coupling reaction of not only primary alkyl electrophiles, but also sterically hindered secondary and tertiary alkyl electrophiles possessing β-hydrogens with various organometallic reagents to construct carbon skeletons. In addition, Ni catalysts opened a new era of asymmetric cross-coupling reaction using alkyl halides. Recent progress in nickel-catalyzed cross-coupling reaction of alkyl electrophiles with sp(3)-, sp(2)-, and sp-hybridized organometallic reagents including asymmetric variants as well as mechanistic insights of nickel catalysis are reviewed in this chapter. PMID:27580894

  15. Abuse potential and dopaminergic effect of alkyl nitrites.

    PubMed

    Jeon, Seo Young; Kim, Yun Ji; Kim, Young-Hoon; Shin, Jisoon; Yun, Jaesuk; Han, Kyoungmoon; Park, Hye-Kyung; Kim, Hyung Soo; Cha, Hye Jin

    2016-08-26

    The abuse of alkyl nitrites is common among adolescents and young adults worldwide. However, the information regarding the effects of alkyl nitrites on the central nervous system and the associated psychological abuse potential is scarce. The abuse potential of 3 representative alkyl nitrites - isobutyl nitrite, isoamyl nitrite, and butyl nitrite - was evaluated in mice using conditioned place preference tests with an unbiased method. The dopamine levels released by synaptosomes extracted from the striatal region were measured using high performance liquid chromatography. Mice treated with the test substances (50mg/kg, i.p.) exhibited a significantly increased drug-paired place preference. Moreover, greater levels of dopamine were released by striatal region synaptosomes in response to isobutyl nitrite treatment in mice. Thus, our findings suggest that alkyl nitrites could lead to psychological dependence and dopaminergic effects. Furthermore, these results provide scientific evidence to support the regulation of alkyl nitrites as psychoactive substances in the future. PMID:27369324

  16. Polyimide characterization studies - Effect of pendant alkyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Young, P. R.

    1984-01-01

    The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

  17. Mutagenicity of aromatic glycidyl ethers with Salmonella.

    PubMed

    Rosman, L B; Chakraborty, P K; Messerly, E A; Sinsheimer, J E

    1988-09-01

    6 aromatic glycidyl ethers containing naphthyl, biphenyl or benzylphenyl substituents were synthesized. These epoxides together with the commercially available compounds 2-biphenylyl glycidyl ether were examined for dose-mutagenicity relationships using the plate incorporation Ames test with Salmonella typhimurium strains TA100 and TA1535. Structure-mutagenicity relationships were further examined for these compounds and 3 phenyl glycidyl ethers by concurrent testing at a single dose with strain TA100. Meaningful correlations could not be established for the mutagenicity of these epoxides to their molecular volumes, partition values, nor to their reactivities with the model nucleophile, 4-(4-nitrobenzyl) pyridine. However, it was noted that increased conjugated aromatic unsaturation with its resulting planarity led to increased mutagenicity and that this effect decreased when it was further removed from the epoxide moiety. PMID:3045534

  18. Ether-linked lipids of Dermabacter hominis, a human skin actinobacterium.

    PubMed

    Valero-Guillén, Pedro L; Fernández-Natal, Isabel; Marrodán-Ciordia, Teresa; Tauch, Andreas; Soriano, Francisco

    2016-03-01

    Dermabacter hominis is a medically important actinobacterial inhabitant of human skin, although it is rarely implicated in infections. The lipid composition of D. hominis is revisited in this study in the context of its natural resistance to daptomycin, an antibiotic whose activity is influenced by membrane lipids. Thin layer chromatography and mass spectrometry revealed that this species contains phospholipids and glycolipids. Using electrospray ionization time of flight mass spectrometry (exact mass) and gas chromatography-mass spectrometry, the major phospholipid of D. hominis was identified as plasmanyl-phosphatidylglycerol (pPG), because it presented one alkyl chain and one acyl chain in the glycerol moiety of the molecule. The structure of the major glycolipid (GL1) was studied by combined gas-liquid chromatography, mass spectrometry and nuclear magnetic resonance, and was established as galactosyl-α-(1→2)-glucosyl-alkyl-acyl-glycerol. Lipid analyses showed differences between one daptomycin-resistant (DAP-R) strain and one daptomycin-sensitive (DAP-S) strain growing in the presence of the antibiotic: DAP-R tended to accumulate GL1 and to reduce pPG, whereas DAP-S maintained high proportions of pPG. The results demonstrate the existence of ether-linked lipids in D. hominis and reveal a differential distribution of phospholipids and glycolipids according to the sensitivity or resistance to daptomycin, although the mechanism(s) operating in the resistance to the antibiotic remain(s) to be elucidated. PMID:26867985

  19. Inhalation anaesthesia: from diethyl ether to xenon.

    PubMed

    Bovill, J G

    2008-01-01

    Modern anaesthesia is said to have began with the successful demonstration of ether anaesthesia by William Morton in October 1846, even though anaesthesia with nitrous oxide had been used in dentistry 2 years before. Anaesthesia with ether, nitrous oxide and chloroform (introduced in 1847) rapidly became commonplace for surgery. Of these, only nitrous oxide remains in use today. All modern volatile anaesthetics, with the exception of halothane (a fluorinated alkane), are halogenated methyl ethyl ethers. Methyl ethyl ethers are more potent, stable and better anaesthetics than diethyl ethers. They all cause myocardial depression, most markedly halothane, while isoflurane and sevoflurane cause minimal cardiovascular depression. The halogenated ethers also depress the normal respiratory response to carbon dioxide and to hypoxia. Other adverse effects include hepatic and renal damage. Hepatitis occurs most frequently with halothane, although rare cases have been reported with the other agents. Liver damage is not caused by the anaesthetics themselves, but by reactive metabolites. Type I hepatitis occurs fairly commonly and takes the form of a minor disturbance of liver enzymes, which usually resolves without treatment. Type II, thought to be immune-mediated, is rare, unpredictable and results in a severe fulminant hepatitis with a high mortality. Renal damage is rare, and was most often associated with methoxyflurane because of excessive plasma fluoride concentrations resulting from its metabolism. Methoxyflurane was withdrawn from the market because of the high incidence of nephrotoxicity. Among the contemporary anaesthetics, the highest fluoride concentrations have been reported with sevoflurane, but there are no reports of renal dysfunction associated with its use. Recently there has been a renewed interest in xenon, one of the noble gases. Xenon has many of the properties of an ideal anaesthetic. The major factor limiting its more widespread is the high cost, about

  20. 41. LOOKING WEST AT BUILDING NO. 519, ETHER AND ALCOHOL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. LOOKING WEST AT BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, (LEFT) AND BUILDING NO. 521, ETHER VAULT, (RIGHT) IN FOREGROUND - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  1. 37. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, NORTHWEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, NORTHWEST CORNER OF BUILDING. BUILDING NO. 521 (ETHER VAULT) IN BACKGROUND LEFT. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  2. Crystalline imide/arylene ether copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor); Bass, Robert G. (Inventor)

    1995-01-01

    Crystalline imide/arylene ether block copolymers are prepared by reacting anhydride terminated poly(amic acids) with amine terminated poly)arylene ethers) in polar aprotic solvents and chemically or thermally cyclodehydrating the resulting intermediate poly(amic acids). The block copolymers of the invention have one glass transition temperature or two, depending on the particular structure and/or the compatibility of the block units. Most of these crystalline block copolymers for tough, solvent resistant films with high tensile properties. While all of the copolymers produced by the present invention are crystalline, testing reveals that copolymers with longer imide blocks or higher imide content have increased crystallinity.

  3. Assessing the toxic effects of ethylene glycol ethers using Quantitative Structure Toxicity Relationship models

    SciTech Connect

    Ruiz, Patricia; Mumtaz, Moiz; Gombar, Vijay

    2011-07-15

    Experimental determination of toxicity profiles consumes a great deal of time, money, and other resources. Consequently, businesses, societies, and regulators strive for reliable alternatives such as Quantitative Structure Toxicity Relationship (QSTR) models to fill gaps in toxicity profiles of compounds of concern to human health. The use of glycol ethers and their health effects have recently attracted the attention of international organizations such as the World Health Organization (WHO). The board members of Concise International Chemical Assessment Documents (CICAD) recently identified inadequate testing as well as gaps in toxicity profiles of ethylene glycol mono-n-alkyl ethers (EGEs). The CICAD board requested the ATSDR Computational Toxicology and Methods Development Laboratory to conduct QSTR assessments of certain specific toxicity endpoints for these chemicals. In order to evaluate the potential health effects of EGEs, CICAD proposed a critical QSTR analysis of the mutagenicity, carcinogenicity, and developmental effects of EGEs and other selected chemicals. We report here results of the application of QSTRs to assess rodent carcinogenicity, mutagenicity, and developmental toxicity of four EGEs: 2-methoxyethanol, 2-ethoxyethanol, 2-propoxyethanol, and 2-butoxyethanol and their metabolites. Neither mutagenicity nor carcinogenicity is indicated for the parent compounds, but these compounds are predicted to be developmental toxicants. The predicted toxicity effects were subjected to reverse QSTR (rQSTR) analysis to identify structural attributes that may be the main drivers of the developmental toxicity potential of these compounds.

  4. Bio-waste derived dialdehyde cellulose ethers as supports for α-chymotrypsin immobilization.

    PubMed

    Kumari, Sapana; Chauhan, Ghanshyam S; Ahn, Jou-Hyeon; Reddy, N S

    2016-04-01

    Enzyme immobilization is an important technique to enhance stability, storability and reusability of enzymes. In the present work, pine needles, a forest bio-waste, were used as a feedstock of cellulose to synthesize new materials as supports for immobilization of α-chymotrypsin (CT) enzyme. The extracted cellulose from pine needles was etherified with different alkyl bromides (RBr) and etherified products were further modified to dialdehyde via oxidation with NaIO4 to get the desired products, dialdehyde cellulose ethers (ROcellCHO). CT was then covalently immobilized onto as-synthesized dialdehyde cellulose ethers via Schiff-base formation, i.e., imine linkage. The synthesized products and enzyme immobilization were confirmed by different characterization techniques and the activity assay of the free and the immobilized CT was carried out using standard protocol with variation of different parameters such as temperature, pH and substrate concentration. The storage stability and reusability of the immobilized CT were also investigated. CT activity was also studied in simulated physiological conditions in the artificial gastric fluid and artificial intestinal fluid. Artificial neural network (ANN) model was employed to correlate the relationship with% relative activity and time, temperature and pH affecting enzyme activity. A good correlation of experimental data was predicted by ANN model. PMID:26723248

  5. Calixarene crown ether solvent composition and use thereof for extraction of cesium from alkaline waste solutions

    DOEpatents

    Moyer, Bruce A.; Sachleben, Richard A.; Bonnesen, Peter V.; Presley, Derek J.

    2001-01-01

    A solvent composition and corresponding method for extracting cesium (Cs) from aqueous neutral and alkaline solutions containing Cs and perhaps other competing metal ions is described. The method entails contacting an aqueous Cs-containing solution with a solvent consisting of a specific class of lipophilic calix[4]arene-crown ether extractants dissolved in a hydrocarbon-based diluent containing a specific class of alkyl-aromatic ether alcohols as modifiers. The cesium values are subsequently recovered from the extractant, and the solvent subsequently recycled, by contacting the Cs-containing organic solution with an aqueous stripping solution. This combined extraction and stripping method is especially useful as a process for removal of the radionuclide cesium-137 from highly alkaline waste solutions which are also very concentrated in sodium and potassium. No pre-treatment of the waste solution is necessary, and the cesium can be recovered using a safe and inexpensive stripping process using water, dilute (millimolar) acid solutions, or dilute (millimolar) salt solutions. An important application for this invention would be treatment of alkaline nuclear tank wastes. Alternatively, the invention could be applied to decontamination of acidic reprocessing wastes containing cesium-137.

  6. Vinyl ethers containing an epoxy group. XVI. Reaction of glycidol vinyloxyethyl ether with acetals

    SciTech Connect

    Nedolya, N.A.; Khil'ko, M.Ya.; Trofimov, B.A.; Sigalov, M.V.

    1988-10-10

    In order to obtain branched acetals with epoxide groups (prospective monomers and intermediates) the authors investigated the reaction of acetaldehyde diethyl and di(1,1,3-trihydrotetrafluoropropyl) acetals with glycidol vinyloxyethyl ether. The addition of acetals to vinyl epoxy ethers was realized, and the first representative of compounds of this type, i.e., 9-glycidyloxy-6-ethoxy-4-methyl-3,7-dioxanonane, was obtained. It was also impossible to add a fluoroacetal to butyl vinyl ether (0.08-1.00 wt. % of catalyst CF/sub 3/COOH, BF/sub 3//times/ OEt/sub 2/, 20-80/degree/C, 0.5-3 h).

  7. Pd and Mo Catalyzed Asymmetric Allylic Alkylation

    PubMed Central

    Trost, Barry M.

    2012-01-01

    The ability to control the alkylation of organic substrates becomes ever more powerful by using metal catalysts. Among the major benefits of metal catalysis is the possibility to perform such processes asymmetrically using only catalytic amounts of the chiral inducing agent which is a ligand to the metal of the catalyst. A unique aspect of asymmetric metal catalyzed processes is the fact that many mechanisms exist for stereoinduction. Furthermore, using the same catalyst system, many types of bonds including but not limited to C-C, C-N, C-O, C-S, C-P, and C-H can be formed asymmetrically. An overview of this process using palladium and molybdenum based metals being developed in my laboratories and how they influence strategy in synthesizing bioactive molecular targets is presented. PMID:22736934

  8. High octane ethers from synthesis gas-derived alcohols

    SciTech Connect

    Klier, K.; Herman, R.G.; Johansson, M.; Feeley, O.C.

    1992-01-01

    The objective of the proposed research is to synthesize high octane ethers, primarily methyl isobutyl ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from H{sub 2}/CO/CO{sub 2} coal-derived synthesis gas via alcohol mixtures that are rich in methanol and 2-methyl-1-propanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers.

  9. 39. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    39. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, LOOKING AT SOUTHWEST CORNER WITH BUILDING NO. 521, ETHER VAULT, AND BUILDING NO. 519-A, ETHER & ALOCOHL STORAGE TANKS, IN BACKGROUND RIGHT. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  10. 40 CFR 721.10551 - Bisphenol S mono ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Bisphenol S mono ether (generic). 721... Substances § 721.10551 Bisphenol S mono ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisphenol S mono ether (PMN...

  11. 40 CFR 721.10551 - Bisphenol S mono ether (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Bisphenol S mono ether (generic). 721... Substances § 721.10551 Bisphenol S mono ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisphenol S mono ether (PMN...

  12. 40 CFR 721.3440 - Haloalkyl substituted cyclic ethers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Haloalkyl substituted cyclic ethers... Substances § 721.3440 Haloalkyl substituted cyclic ethers. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances haloalkyl substituted cyclic ethers (PMN P-85-368 and...

  13. 40 CFR 721.3520 - Aliphatic polyglycidyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aliphatic polyglycidyl ether. 721.3520... Substances § 721.3520 Aliphatic polyglycidyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance aliphatic polyglycidyl ether (PMN P-89-1036) is subject...

  14. 40 CFR 721.3440 - Haloalkyl substituted cyclic ethers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Haloalkyl substituted cyclic ethers... Substances § 721.3440 Haloalkyl substituted cyclic ethers. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances haloalkyl substituted cyclic ethers (PMN P-85-368 and...

  15. 40 CFR 721.3438 - Chlorohydroxyalkyl butyl ether (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Chlorohydroxyalkyl butyl ether... Specific Chemical Substances § 721.3438 Chlorohydroxyalkyl butyl ether (generic). (a) Chemical substance... chlorohydroxyalkyl butyl ether (PMN P-99-1295) is subject to reporting under this section for the significant new...

  16. 40 CFR 721.3438 - Chlorohydroxyalkyl butyl ether (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Chlorohydroxyalkyl butyl ether... Specific Chemical Substances § 721.3438 Chlorohydroxyalkyl butyl ether (generic). (a) Chemical substance... chlorohydroxyalkyl butyl ether (PMN P-99-1295) is subject to reporting under this section for the significant new...

  17. 40 CFR 721.3480 - Halogenated biphenyl glycidyl ethers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogenated biphenyl glycidyl ethers... Substances § 721.3480 Halogenated biphenyl glycidyl ethers. (a) Chemical substance and significant new uses... ethers (PMNs P-90-1844, P-90-1845, and P-90-1846) are subject to reporting under this section for...

  18. 40 CFR 721.3480 - Halogenated biphenyl glycidyl ethers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Halogenated biphenyl glycidyl ethers... Substances § 721.3480 Halogenated biphenyl glycidyl ethers. (a) Chemical substance and significant new uses... ethers (PMNs P-90-1844, P-90-1845, and P-90-1846) are subject to reporting under this section for...

  19. 40 CFR 721.3486 - Polyglycerin mono(4-nonylphenyl) ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyglycerin mono(4-nonylphenyl) ether... Substances § 721.3486 Polyglycerin mono(4-nonylphenyl) ether. (a) Chemical substance and significant new uses...-nonylphenyl) ether (PMN P-94-2230) is subject to reporting under this section for the significant new...

  20. 40 CFR 721.10069 - Ether amine phosphonate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ether amine phosphonate (generic). 721... Substances § 721.10069 Ether amine phosphonate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as ether amine phosphonate (PMN...

  1. 40 CFR 721.3465 - Stilbene diglycidyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Stilbene diglycidyl ether. 721.3465... Substances § 721.3465 Stilbene diglycidyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as stilbene diglycidyl ether (PMN P-96-1427) is subject...

  2. 40 CFR 721.3550 - Dipropylene glycol dimethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dipropylene glycol dimethyl ether. 721... Substances § 721.3550 Dipropylene glycol dimethyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified as dipropylene glycol dimethyl ether (PMN...

  3. 40 CFR 721.3486 - Polyglycerin mono(4-nonylphenyl) ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Polyglycerin mono(4-nonylphenyl) ether... Substances § 721.3486 Polyglycerin mono(4-nonylphenyl) ether. (a) Chemical substance and significant new uses...-nonylphenyl) ether (PMN P-94-2230) is subject to reporting under this section for the significant new...

  4. 40 CFR 721.3430 - 4-Bromophenyl phenyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false 4-Bromophenyl phenyl ether. 721.3430... Substances § 721.3430 4-Bromophenyl phenyl ether. (a) Chemical substance and significant new use subject to reporting. (1) The chemical substance 4-bromophenyl phenyl ether (CAS No. 101-55-3) is subject to...

  5. 40 CFR 721.3500 - Perhalo alkoxy ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Perhalo alkoxy ether. 721.3500 Section... Substances § 721.3500 Perhalo alkoxy ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perhalo alkoxy ether (PMN P-83-1227)...

  6. 40 CFR 721.3550 - Dipropylene glycol dimethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dipropylene glycol dimethyl ether. 721... Substances § 721.3550 Dipropylene glycol dimethyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified as dipropylene glycol dimethyl ether (PMN...

  7. 40 CFR 721.3420 - Brominated arylalkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Brominated arylalkyl ether. 721.3420... Substances § 721.3420 Brominated arylalkyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as brominated arylalkyl ether (P-83-906)...

  8. 40 CFR 721.3500 - Perhalo alkoxy ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Perhalo alkoxy ether. 721.3500 Section... Substances § 721.3500 Perhalo alkoxy ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perhalo alkoxy ether (PMN P-83-1227)...

  9. 40 CFR 721.10069 - Ether amine phosphonate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ether amine phosphonate (generic). 721... Substances § 721.10069 Ether amine phosphonate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as ether amine phosphonate (PMN...

  10. 40 CFR 721.3430 - 4-Bromophenyl phenyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false 4-Bromophenyl phenyl ether. 721.3430... Substances § 721.3430 4-Bromophenyl phenyl ether. (a) Chemical substance and significant new use subject to reporting. (1) The chemical substance 4-bromophenyl phenyl ether (CAS No. 101-55-3) is subject to...

  11. 40 CFR 721.3520 - Aliphatic polyglycidyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Aliphatic polyglycidyl ether. 721.3520... Substances § 721.3520 Aliphatic polyglycidyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance aliphatic polyglycidyl ether (PMN P-89-1036) is subject...

  12. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  13. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  14. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  15. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  16. Synthesis and characterizations of electrospun sulfonated poly (ether ether ketone) SPEEK nanofiber membrane

    NASA Astrophysics Data System (ADS)

    Hasbullah, N.; Sekak, K. A.; Ibrahim, I.

    2016-07-01

    A novel electrospun polymer electrolyte membrane (PEM) based on Sulfonated Poly (ether ether ketone) were prepared and characterized. The poly (ether ether ketone) PEEK was sulfonated using concentrated sulfuric acid at room temperature for 60 hours reaction time. The degree sulfonation (DS) of the SPEEK are 58% was determined by H1 NMR using area under the peak of the hydrogen shielding at aromatic ring of the SPEEK. Then, the functional group of the SPEEK was determined using Fourier transfer infrared (FTIR) showed O-H vibration at 3433 cm-1 of the sulfonated group (SO2-OH). The effect of the solvent and polymer concentration toward the electrospinning process was investigated which, the DMAc has electrospun ability compared to the DMSO. While, at 20 wt.% of the polymer concentration able to form a fine and uniform nanofiber, this was confirmed by FESEM that shown electrospun fiber mat SPEEK surface at nano scale diameter.

  17. Review of glycol ether and glycol ether ester solvents used in the coating industry.

    PubMed Central

    Smith, R L

    1984-01-01

    Ethylene oxide-based glycol ether and glycol ether ester solvents have been used in the coatings industry for the past fifty years. Because of their excellent performance properties (evaporation rate, blush resistance, flow-out and leveling properties, solubility for coating resins, solvent activity, mild odor, good coupling ability, good solvent release) a complete line of ethylene oxide-based solvents of various molecular weights has been developed. These glycol ether and glycol ether ester solvents have better solvent activity for coating resin than ester or ketone solvents in their evaporation rate range. The gloss, flow and leveling, and general performance properties of many coating systems are dependent on the use of these products in the coating formula. Because of the concern about the toxicity of certain ethylene oxide-based solvents, other products are being evaluated as replacements in coating formulas. PMID:6499793

  18. Distribution of ether in two postmortem cases.

    PubMed

    Cox, Dawn; DeRienz, Rebecca; Jufer Phipps, Rebecca A; Levine, Barry; Jacobs, Aaron; Fowler, David

    2006-10-01

    Diethyl ether (ether) is a volatile liquid that was used in the 1800s as an anesthetic agent; however, it is no longer used for this purpose, partly because of its odor and flammability. Two postmortem cases in which ether was detected are presented. The first case was an 18-year-old male found hanging from a basement ceiling brace in a semi-sitting position with a gas mask covering his face. A container of Prestone starting fluid and a bong were found on the floor close to the body. The second case was a 20-year-old male found unresponsive in his dormitory room with two black plastic trash bags secured over his head. Two saturated rags and a resealable bag containing a clear liquid were contained within these trash bags. An almost empty can of Tradco starting fluid was also found at the scene. Ether concentrations were determined by headspace gas chromatography-mass spectrometry in the selective ion monitoring mode. In case #1, the medical examiner ruled that the cause of death was asphyxia due to hanging; the manner of death was undetermined. In case #2, the medical examiner ruled that the cause of death was asphyxia and the manner of death was suicide. PMID:17132265

  19. POLYBROMINATED DIPHENYL ETHERS IN SOUTHERN MISSISSIPPI CATFISH

    EPA Science Inventory

    Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in a wide variety of consumer products. Concerns surrounding these compounds are primarily due do their ubiquitous presence in the environment as well as in human tissue, such as milk, coupled with evidence indi...

  20. Elastic electron scattering by ethyl vinyl ether

    SciTech Connect

    Khakoo, M. A.; Hong, L.; Kim, B.; Winstead, C.; McKoy, V.

    2010-02-15

    We report measured and calculated results for elastic scattering of low-energy electrons by ethyl vinyl ether (ethoxyethene), a prototype system for studying indirect dissociative attachment processes that may play a role in DNA damage. The integral cross section displays the expected {pi}{sup *} shape resonance. The agreement between the calculated and measured cross sections is generally good.

  1. The introduction of ether in Paris revisited.

    PubMed

    Defalque, Ray J; Wright, A J

    2008-04-01

    Modern accounts of the introduction of ether anesthesia in France are mainly based on a letter written in February 1947 to the editor of the Boston Medical and Surgical Journal by Francis Willis Fisher, a young Boston surgeon at that time a student in Paris. Fisher's letter hints that his efforts were the main impetus to the acceptance of ether by the French academic surgeons. The authors have reviewed the contemporary medical literature, especially the numerous French journals, relative to that event. Their review suggests that Fisher was largely ignored by the French surgeons and by his young competitors then studying in Paris. He seems to have exaggerated his role in the acceptance of ether anesthesia in France. The reviewed literature also provides some additional details and some corrections to Fisher's account. Modern accounts of the introduction of ether in France have relied heavily on a letter sent in February 1847 to the editor of the Boston Medical & Surgical Journal by Francis W. Fisher, a young Boston physician then studying in Paris. Fisher's report is often vague, occasionally incorrect, and probably exaggerates his role in the acceptance of anesthesia in Paris. This review attempts to complement and correct Fisher's account. PMID:20506770

  2. "Crown Ether" Synthesis: An Organic Laboratory Experiment.

    ERIC Educational Resources Information Center

    Field, Kurt W.; And Others

    1979-01-01

    This experiment is designed to acquaint the student with a macromolecular synthesis of a crown ether type compound. The starting materials are readily available and the product, a cyclic polyether, belongs to a class of compounds that has aroused the interest of chemist and biologist alike. (Author/BB)

  3. Bis(2-chloro-1-methylethyl) ether

    Integrated Risk Information System (IRIS)

    Bis ( 2 - chloro - 1 - methylethyl ) ether ; CASRN 108 - 60 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assess

  4. Methyl tert-butyl ether (MTBE)

    Integrated Risk Information System (IRIS)

    Methyl tert - butyl ether ( MTBE ) ; CASRN 1634 - 04 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments f

  5. Ethylene glycol monobutyl ether (EGBE) (2-Butoxyethanol)

    Integrated Risk Information System (IRIS)

    Ethylene glycol monobutyl ether ( EGBE ) ( 2 - Butoxyethanol ) ; CASRN 111 - 76 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I (

  6. Biomonitoring Polybrominated Diphenyl Ethers in Lactating Women

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Breast milk is a valuable biological specimen for biomonitoring lipid-soluble polybrominated diphenyl ethers (PBDEs). The goal of this project was to determine the levels of PBDEs in breast milk of lactating women from the Seacoast region of New Hampshire and to examine potential relationships betw...

  7. Dimensionally Stable Ether-Containing Polyimide Copolymers

    NASA Technical Reports Server (NTRS)

    Fay, Catharine C. (Inventor); St.Clair, Anne K. (Inventor)

    1999-01-01

    Novel polyimide copolymers containing ether linkages were prepared by the reaction of an equimolar amount of dianhydride and a combination of diamines. The polyimide copolymers described herein possess the unique features of low moisture uptake, dimensional stability, good mechanical properties, and moderate glass transition temperatures. These materials have potential application as encapsulants and interlayer dielectrics.

  8. Imide/arylene ether block copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Hergenrother, P. M.; Bass, R. G.

    1991-01-01

    Two series of imide/arylene either block copolymers were prepared using an arylene ether block and either an amorphous or semi-crystalline imide block. The resulting copolymers were characterized and selected physical and mechanical properties were determined. These results, as well as comparisons to the homopolymer properties, are discussed.

  9. Polyimides Containing Carbonyl and Ether Connecting Groups

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M.; Havens, Stephen J.

    1987-01-01

    Semicrystallinity gives rise to tough, solvent-resistant polymers. New polyimides prepared from reaction of aromatic dianhydrides with new diamines containing carbonyl and ether connecting groups between aromatic rings. Damines prepared from reaction of 4-aminophenol with activated aromatic difluoro compounds in presence of potassium carbonate. These types of polymers have potential applications in molded products, films, adhesives, and composites.

  10. U. S. refiners must increase alkylation capacity to meet demand

    SciTech Connect

    Rhodes, A.

    1994-08-22

    Alkylation is one of the most important refinery processes for producing conventional gasoline. And alkylate will continue to be a preferred blending stock in the reformulated-gasoline era. US alkylation units are operating at more than 90% of capacity, and additional capacity will be required to meet projected demand in 1998 and beyond. This capacity will come primarily through debottlenecking existing units, but new capacity will be required in the U.S., particularly after the year 2000. This paper briefly discusses industry trends, supply and demand, and solid acid catalyst technology.

  11. Stereospecific Nickel-Catalyzed Cross-Coupling Reactions of Benzylic Ethers and Esters

    PubMed Central

    2015-01-01

    Conspectus This Account presents the development of a suite of stereospecific alkyl–alkyl cross-coupling reactions employing nickel catalysts. Our reactions complement related nickel-catalyzed stereoconvergent cross-coupling reactions from a stereochemical and mechanistic perspective. Most reactions of alkyl electrophiles with low-valent nickel complexes proceed through alkyl radicals and thus are stereoablative; the correct enantioselective catalyst can favor the formation of one enantiomer. Our reactions, in contrast, are stereospecific. Enantioenriched ethers and esters are cleanly converted to cross-coupled products with high stereochemical fidelity. While mechanistic details are still to be refined, our results are consistent with a polar, two-electron oxidative addition that avoids the formation of radical intermediates. This reactivity is unusual for a first-row transition metal. The cross-coupling reactions engage a range of benzylic ethers and esters, including methyl ethers, tetrahydropyrans, tetrahydrofurans, esters, and lactones. Coordination of the arene substituent to the nickel catalyst accelerates the reactions. Arenes with low aromatic stabilization energies, such as naphthalene, benzothiophene, and furan, serve as the best ligands and provide the highest reactivity. Traceless directing groups that accelerate reactions of sluggish substrates are described, providing partial compensation for arene coordination. Kumada, Negishi, and Suzuki reactions provide incorporation of a broad range of transmetalating agents. In Kumada coupling reactions, a full complement of Grigard reagents, including methyl, n-alkyl, and aryl Grignard reagents, are employed. In reactions employing methylmagnesium iodide, ligation of the nickel catalyst by rac-BINAP or DPEphos provides the highest yield and stereospecificity. For all other Grignard reagents, Ni(dppe)Cl2 has emerged as the best catalyst. Negishi cross-coupling reactions employing dimethylzinc are reported as

  12. Process for making propenyl ethers and photopolymerizable compositions containing them

    DOEpatents

    Crivello, James V.

    1996-01-01

    Propenyl ether monomers of formula V A(OCH.dbd.CHCH.sub.3).sub.n wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  13. Process for making propenyl ethers and photopolymerizable compositions containing them

    DOEpatents

    Crivello, J.V.

    1996-01-23

    Propenyl ether monomers of formula A(OCH{double_bond}CHCH{sub 3}){sub n} (V) wherein n is an integer from one to six and A is selected from cyclic ethers, polyether, and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  14. Copper(I)/Ligand-Catalyzed 5-endo Radical Cyclization-Aromatization of 2,2,2-Trichloroethyl Vinyl Ethers: Synthesis of 2,3-Difunctionalized 4-Chlorofurans.

    PubMed

    Ram, Ram N; Gupta, Dharmendra Kumar; Soni, Vineet Kumar

    2016-02-19

    Copper(I)/ligand-catalyzed one pot synthesis of highly substituted 2,3-difunctionalized-4-chlorofurans has been reported. The reaction proceeds via a Cu(I)-catalyzed regioselective 5-endo-trig radical cyclization of 2,2,2-trichloroethyl vinyl ethers followed by the base-promoted dehydrochlorination. The success of the kinetically disfavored 5-endo cyclization was attributed to the formation of captodatively stabilized radical intermediate in the cyclization step and relatively high reaction temperature. Synthetic application of this protocol was also demonstrated in the preparation of alkyl and aryl substituted 4-chlorofuranonapthoquinones. PMID:26796068

  15. Syntheses of all the possible monomethyl ethers and several deoxyhalo analogues of methyl beta-lactoside as ligands for the Ricinus communis lectins.

    PubMed

    Fernández, P; Jiménez-Barbero, J; Martín-Lomas, M

    1994-02-17

    The synthesis of all the possible monomethyl ethers of methyl beta-lactoside (1) has been performed from 1 in a straightforward way, making use of the different reactivity of the hydroxyl groups in alkylation and stannylation reactions. In addition, the deoxyfluoro derivatives of 1 at positions, 6,3',4',epi-4', and 6' have been prepared by reaction of the appropriate substrates with diethylaminosulfur trifluoride or tetrabutylammonium fluoride. Finally, the 6-deoxyiodo and 6'-bromodeoxy analogues of 1 have also been prepared. PMID:8180997

  16. Ultrasonic spectrometry of aqueous solutions of alkyl maltosides: kinetics of micelle formation and head-group isomerization.

    PubMed

    Haller, Julian; Kaatze, Udo

    2009-10-19

    At frequencies between 100 kHz and 400 MHz, ultrasonic attenuation spectra are measured at 25 degrees C for aqueous solutions of hexyl-, heptyl-, octyl-, nonyl-, and decyl-beta-D-maltopyranoside as well as of decyl-alpha-D-maltopyranoside. The spectra with surfactant concentration c above the relevant critical micelle concentration (cmc) display three relaxation terms with discrete relaxation times. That with a relaxation time between 0.1 and 1.2 micros is due to exchange of monomers between micelles and the suspending phase. It is discussed in the light of the Teubner-Kahlweit-Aniansson-Wall model of the formation/decay kinetics of systems with Gaussian size distribution of micelles. The relaxation parameters are compared to those for solutions of other non-ionic surfactants, such as alkyl monoglycosides and poly(ethylene glycol) monoalkyl ethers. At c < cmc this low-frequency relaxation term is missing and at c approximately = cmc it is broadened, as is characteristic of solutions of oligomeric molecular structures rather than proper micelles. The relaxation terms with relaxation times between 6 and 15 ns and 0.7 and 2.3 ns reveal head-group rotations around glycosidic angles and isomerization of the exocyclic hydroxymethyl group, respectively. These unimolecular reactions are also examined with a view to solutions of alkyl monoglycosides as well as of glucose and maltose. PMID:19760695

  17. Detection of Alkylating Agents using Electrical and Mechanical Means

    NASA Astrophysics Data System (ADS)

    Gerchikov, Yulia; Borzin, Elena; Gannot, Yair; Shemesh, Ariel; Meltzman, Shai; Hertzog-Ronen, Carmit; Tal, Shay; Stolyarova, Sara; Nemirovsky, Yael; Tessler, Nir; Eichen, Yoav

    2011-08-01

    Alkylating agents are reactive molecules having at least one polar bond between a carbon atom and a good leaving group. These often simple molecules are frequently used in organic synthesis, as sterilizing agents in agriculture and even as anticancer agents in medicine. Unfortunately, for over a century, some of the highly reactive alkylating agents are also being used as blister chemical warfare agents. Being relatively simple to make, the risk is that these will be applied by terrorists as poor people warfare agents. The detection and identification of such alkylating agents is not a simple task because of their high reactivity and simple structure of the reactive site. Here we report on new approaches to the detection and identification of such alkylating agents using electrical (organic field effect transistors) and mechanical (microcantilevers) means.

  18. Radical-based alkylation of guanine derivatives in aqueous medium.

    PubMed

    Chatgilialoglu, Chryssostomos; Caminal, Clara; Mulazzani, Quinto G

    2011-05-01

    The radical-based alkylation of 8-bromoguanosine (1a) and 8-bromo-2'-deoxyguanosine (1b) at the C8 position has been investigated in aqueous solutions. Alkyl radicals were generated by scavenging of the primary species of γ-radiolysis by the alcohol substrate. These reactions result in the efficient formation of intermolecular C-C bonds in aqueous media, by using the reactivity of α-hydroxyalkyl radicals derived from alcohols with 1a and 1b. A mechanism for the formation of C8 guanine alkylated adducts has been proposed, based on the quantification of radiation chemical yields for the disappearance of starting material and the formation of all products. Two α-hydroxyalkyl radicals are needed to form an alkylated guanine, the first one adding to C8 followed by ejection of Br(-) with formation of guanyl adduct and the second one acting as reducing agent of the guanyl adduct. PMID:21431230

  19. Perfluorinated Alkyl Compounds: Challenges To Develop Robust And Reliable Methods

    EPA Science Inventory

    An increasing number of studies have been conducted to investigate the environmental distribution of perfluorinated alkyl compounds (PFCs), some of which are known to be toxic in laboratory studies. Despite growing public concerns, environmental monitoring data are still limited...

  20. Chain architecture and micellization: A mean-field coarse-grained model for poly(ethylene oxide) alkyl ether surfactants

    SciTech Connect

    García Daza, Fabián A.; Mackie, Allan D.; Colville, Alexander J.

    2015-03-21

    Microscopic modeling of surfactant systems is expected to be an important tool to describe, understand, and take full advantage of the micellization process for different molecular architectures. Here, we implement a single chain mean field theory to study the relevant equilibrium properties such as the critical micelle concentration (CMC) and aggregation number for three sets of surfactants with different geometries maintaining constant the number of hydrophobic and hydrophilic monomers. The results demonstrate the direct effect of the block organization for the surfactants under study by means of an analysis of the excess energy and entropy which can be accurately determined from the mean-field scheme. Our analysis reveals that the CMC values are sensitive to branching in the hydrophilic head part of the surfactant and can be observed in the entropy-enthalpy balance, while aggregation numbers are also affected by splitting the hydrophobic tail of the surfactant and are manifested by slight changes in the packing entropy.

  1. Copper-catalyzed arylation of alkyl halides with arylaluminum reagents

    PubMed Central

    Shrestha, Bijay

    2015-01-01

    Summary We report a Cu-catalyzed coupling between triarylaluminum reagents and alkyl halides to form arylalkanes. The reaction proceeds in the presence of N,N,N’,N’-tetramethyl-o-phenylenediamine (NN-1) as a ligand in combination with CuI as a catalyst. This catalyst system enables the coupling of primary alkyl iodides and bromides with electron-neutral and electron-rich triarylaluminum reagents and affords the cross-coupled products in good to excellent yields. PMID:26734088

  2. Copper-catalyzed arylation of alkyl halides with arylaluminum reagents.

    PubMed

    Shrestha, Bijay; Giri, Ramesh

    2015-01-01

    We report a Cu-catalyzed coupling between triarylaluminum reagents and alkyl halides to form arylalkanes. The reaction proceeds in the presence of N,N,N',N'-tetramethyl-o-phenylenediamine (NN-1) as a ligand in combination with CuI as a catalyst. This catalyst system enables the coupling of primary alkyl iodides and bromides with electron-neutral and electron-rich triarylaluminum reagents and affords the cross-coupled products in good to excellent yields. PMID:26734088

  3. Alkyl and phenolic glycosides from Saussurea stella.

    PubMed

    Wang, Tian-Min; Wang, Ru-Feng; Chen, Hu-Biao; Shang, Ming-Ying; Cai, Shao-Qing

    2013-07-01

    One alkyl glycoside, saussurostelloside A (1), two phenolic glycosides, saussurostellosides B1 (2) and B2 (3), and 27 known compounds, including eleven flavonoids, seven phenolics, six lignans, one neolignan, one phenethyl glucoside and one fatty acid, were isolated from an ethanol extract of Saussurea stella (Asteraceae). Their structures were elucidated by NMR, MS, UV, and IR spectroscopic analysis. Of the known compounds, (+)-medioresinol-di-O-β-D-glucoside (7), picraquassioside C (10), and diosmetin-3'-O-β-D-glucoside (27) were isolated from the Asteraceae family for the first time, while (+)-pinoresinol-di-O-β-D-glucoside (6), di-O-methylcrenatin (11), protocatechuic acid (14), 1,5-di-O-caffeoylquinic acid (17), formononetin (28), and phenethyl glucoside (29) were isolated from the Saussurea genus for the first time. The anti-inflammatory activities of three new compounds (1-3), five lignans ((-)-arctiin (4), (+)-pinoresinol-4-O-β-D-glucoside (5), (+)-pinoresinol-di-O-β-D-glucoside (6), (+)-medioresinol-di-O-β-D-glucoside (7) and (+)-syringaresinol-4-O-β-D-glucoside (8)), one neolignan (picraquassioside C (10)), and one phenolic glycoside (di-O-methylcrenatin (11)) were evaluated by testing their inhibition of the release of β-glucuronidase from PAF-stimulated neutrophils. Only compound 5 showed moderate inhibition of the release of β-glucuronidase, with an inhibition ratio of 39.1%. PMID:23567860

  4. Final Technical Report [Development of Catalytic Alkylation and Fluoroalkylation Methods

    SciTech Connect

    Vicic, David A.

    2014-05-01

    In the early stages of this DOE-funded research project, we sought to prepare and study a well-defined nickel-alkyl complex containing tridentate nitrogen donor ligands. We found that reaction of (TMEDA)NiMe2 (1) with terpyridine ligand cleanly led to the formation of (terpyridyl)NiMe (2), which we also determined to be an active alkylation catalyst. The thermal stability of 2 was unlike that seen for any of the active pybox ligands, and enabled a number of key studies on alkyl transfer reactions to be performed, providing new insights into the mechanism of nickel-mediated alkyl-alkyl cross-coupling reactions. In addition to the mechanistic studies, we showed that the terpyridyl nickel compounds can catalytically cross-couple alkyl iodides in yields up to 98% and bromides in yields up to 46 %. The yields for the bromides can be increased up to 67 % when the new palladium catalyst [(tpy’)Pd-Ph]I is used. The best route to the targeted [(tpy)NiBr] (1) was found to involve the comproportionation reaction of [(dme)NiBr{sub 2}] and [Ni(COD){sub 2}] in the presence of two equivalents of terpyridine. This reaction was driven to high yields of product formation (72 % isolated) by the precipitation of 1 from THF solvent.

  5. Alcohols as alkylating agents in heteroarene C–H functionalization

    PubMed Central

    Jin, Jian; MacMillan, David W. C.

    2015-01-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage1. One of the core principles that underlies DNA biosynthesis is the radical-mediated elimnation of H2O to deoxygenate ribonucleotides, an example of ‘spin-center shift’ (SCS)2, during which an alcohol C–O bond is cleaved, resulting in a carbon-centered radical intermediate. While SCS is a well-understood biochemical process, it is underutilized by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylations using alcohols as radical precursors. Considering traditional radical-based alkylation methods require the use of stoichiometric oxidants, elevated temperatures, or peroxides3–7, the development of a mild protocol using simple and abundant alkylating agents would have significant utility in the synthesis of diversely functionalized pharmacophores. In this manuscript, we describe the successful execution of this idea via the development of a dual catalytic alkylation of heteroarenes using alcohols as mild alkylating reagents. This method represents the first broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer (HAT) catalysis. The utility of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone. PMID:26308895

  6. Salvage of failed protein targets by reductive alkylation.

    PubMed

    Tan, Kemin; Kim, Youngchang; Hatzos-Skintges, Catherine; Chang, Changsoo; Cuff, Marianne; Chhor, Gekleng; Osipiuk, Jerzy; Michalska, Karolina; Nocek, Boguslaw; An, Hao; Babnigg, Gyorgy; Bigelow, Lance; Joachimiak, Grazyna; Li, Hui; Mack, Jamey; Makowska-Grzyska, Magdalena; Maltseva, Natalia; Mulligan, Rory; Tesar, Christine; Zhou, Min; Joachimiak, Andrzej

    2014-01-01

    The growth of diffraction-quality single crystals is of primary importance in protein X-ray crystallography. Chemical modification of proteins can alter their surface properties and crystallization behavior. The Midwest Center for Structural Genomics (MCSG) has previously reported how reductive methylation of lysine residues in proteins can improve crystallization of unique proteins that initially failed to produce diffraction-quality crystals. Recently, this approach has been expanded to include ethylation and isopropylation in the MCSG protein crystallization pipeline. Applying standard methods, 180 unique proteins were alkylated and screened using standard crystallization procedures. Crystal structures of 12 new proteins were determined, including the first ethylated and the first isopropylated protein structures. In a few cases, the structures of native and methylated or ethylated states were obtained and the impact of reductive alkylation of lysine residues was assessed. Reductive methylation tends to be more efficient and produces the most alkylated protein structures. Structures of methylated proteins typically have higher resolution limits. A number of well-ordered alkylated lysine residues have been identified, which make both intermolecular and intramolecular contacts. The previous report is updated and complemented with the following new data; a description of a detailed alkylation protocol with results, structural features, and roles of alkylated lysine residues in protein crystals. These contribute to improved crystallization properties of some proteins. PMID:24590719

  7. Alcohols as alkylating agents in heteroarene C-H functionalization

    NASA Astrophysics Data System (ADS)

    Jin, Jian; MacMillan, David W. C.

    2015-09-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage. One of the core principles underlying DNA biosynthesis is the radical-mediated elimination of H2O to deoxygenate ribonucleotides, an example of `spin-centre shift', during which an alcohol C-O bond is cleaved, resulting in a carbon-centred radical intermediate. Although spin-centre shift is a well-understood biochemical process, it is underused by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylation reactions using alcohols as radical precursors. Because conventional radical-based alkylation methods require the use of stoichiometric oxidants, increased temperatures or peroxides, a mild protocol using simple and abundant alkylating agents would have considerable use in the synthesis of diversely functionalized pharmacophores. Here we describe the development of a dual catalytic alkylation of heteroarenes, using alcohols as mild alkylating reagents. This method represents the first, to our knowledge, broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer catalysis. The value of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone.

  8. Alcohols as alkylating agents in heteroarene C-H functionalization.

    PubMed

    Jin, Jian; MacMillan, David W C

    2015-09-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage. One of the core principles underlying DNA biosynthesis is the radical-mediated elimination of H2O to deoxygenate ribonucleotides, an example of 'spin-centre shift', during which an alcohol C-O bond is cleaved, resulting in a carbon-centred radical intermediate. Although spin-centre shift is a well-understood biochemical process, it is underused by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylation reactions using alcohols as radical precursors. Because conventional radical-based alkylation methods require the use of stoichiometric oxidants, increased temperatures or peroxides, a mild protocol using simple and abundant alkylating agents would have considerable use in the synthesis of diversely functionalized pharmacophores. Here we describe the development of a dual catalytic alkylation of heteroarenes, using alcohols as mild alkylating reagents. This method represents the first, to our knowledge, broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer catalysis. The value of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone. PMID:26308895

  9. Pentanidium- and Bisguanidinium-Catalyzed Enantioselective Alkylations Using Silylamide as Brønsted Probase.

    PubMed

    Teng, Bo; Chen, Wenchao; Dong, Shen; Kee, Choon Wee; Gandamana, Dhika Aditya; Zong, Lili; Tan, Choon-Hong

    2016-08-10

    Most asymmetric phase transfer reactions are Brønsted base reactions, and the inorganic bases used greatly influenced the profile of the reaction. Alkoxide salts are able to activate substrates with high pKa values, but background reactions are often unavoidable. On the other hand, carbonate and phosphate salts are milder, but their low basicity limits the scope of their reactions. This presents a difficult situation whereby fragile substrates such as lactone will be hydrolyzed by a stronger base but will not be activated with a weaker one. Thus, a Brønsted probase strategy is devised, in which a strong base can be generated in situ from silylamide (probase) through the use of fluoride. In this approach, the strong base produced will be transient and not be in excess, thus reducing background and side reactions. We demonstrate this strategy using pentanidinium and bisguanidinium as catalysts; highly enantioselective phase transfer alkylation of several types of substrates including dihydrocoumarin (lactone) can be achieved. We found that the probase also acts as a silylation reagent, generating silyl enol ether or silyl ketene acetal, which are key intermediates in the reaction. We further propose that hypervalent silicates form ion-pairs with pentanidinium and bisguanidinium as intermediates in the reaction, and it is through these ion-pairs that the selective enantiofacial approach of the electrophile is determined. PMID:27447024

  10. Ether bridge formation in loline alkaloid biosynthesis

    PubMed Central

    Pan, Juan; Bhardwaj, Minakshi; Faulkner, Jerome R.; Nagabhyru, Padmaja; Charlton, Nikki D.; Higashi, Richard M.; Miller, Anne-Frances; Young, Carolyn A.; Grossman, Robert B.; Schardl, Christopher L.

    2014-01-01

    Lolines are potent insecticidal agents produced by endophytic fungi of cool-season grasses. These alkaloids are composed of a pyrrolizidine ring system and an uncommon ether bridge linking carbons 2 and 7. Previous results indicated that 1-aminopyrrolizidine was a pathway intermediate. We used RNA interference to knock down expression of lolO, resulting in the accumulation of a novel alkaloid identified as exo-1-acetamidopyrrolizidine based on high-resolution MS and NMR. Genomes of endophytes differing in alkaloid profiles were sequenced, revealing that those with mutated lolO accumulated exo-1-acetamidopyrrolizidine but no lolines. Heterologous expression of wild-type lolO complemented a lolO mutant, resulting in the production of N-acetylnorloline. These results indicated that the non-heme iron oxygenase, LolO, is required for ether bridge formation, probably through oxidation of exo-1-acetamidopyrrolizidine. PMID:24374065

  11. Cyclic ethers adsorbed on Ru(001)

    NASA Astrophysics Data System (ADS)

    Walczak, M. M.; Thiel, P. A.

    1990-11-01

    The three cyclic ethers 1,3-dioxane. 1,4-dioxane and 1,3,5-trioxane all exhibit multiple desorption states from Ru(001) between 200 and 310 K, in addition to the multilayer and metastable states at lower temperature. Most distinctive are the two low-temperature α-states. which are similar in shape, position, and relative population for all three compounds. This suggests that these states are associated with configurations which are accessible to all three molecules. The data also indicate that there is some molecular decomposition to gaseous CO and H 2. 1,4-Dioxane yields the largest amounts of these decomposition products, suggesting that this molecule is most susceptible to surface-catalyzed decomposition. The desorption data for the three cyclic ethers are grossly similar to each other, and also to the straight-chain diethers which we have previously studied.

  12. Synthesis of new liquid crystalline diglycidyl ethers.

    PubMed

    Mohammed, Issam Ahmed; Hamidi, Rashidah Mohamed

    2012-01-01

    The phenolic Schiff bases I-VI were synthesized by condensation reactions between various diamines, namely o-dianisidine, o-tolidine and ethylenediamine with vanillin or p-hydroxybenzaldehyde and subsequent reactions between these phenolic Schiff bases and epichlorohydrin to produce new diglycidyl ethers Ia-VIa. The structures of these compounds were confirmed by CHN, FT-IR, (1)H-NMR, and (13)C-NMR spectroscopy. Their thermotropic liquid crystalline behavior was studied using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). All the diglycidyl ethers prepared exhibit nematic mesophases, except for Va and VIa, which did not show any transition mesophases, but simply flow to liquids. PMID:22233565

  13. Poly(Arylene Ether Imidazole) Surface Films

    NASA Technical Reports Server (NTRS)

    Connell, John W.; Towell, Timothy W.; Tompkins, Stephen S.

    1993-01-01

    Films adhere well to some substrates, provide smooth surfaces, and facilitate release from molds. Thin films of thermoplastic poly(arylene ether imidazole)s (PAEI's) particularly suitable for use as surface modifiers for graphite/epoxy or graphite/bismaleimide composite panels. Molecule of PAEI includes imidazole groups along its backbone that co-cure with epoxies or bismaleimides during processing. Films thermally stable and resistant to bombardment by energetic electrons.

  14. Combustion pathways of the alkylated heteroaromatics: bond dissociation enthalpies and alkyl group fragmentations

    SciTech Connect

    Hayes, C.J.; Hadad, C.M.

    2009-11-15

    The bond dissociation enthalpies (BDEs) of the alkyl groups of the alkyl-substituted heterocycles have been studied and compiled using DFT methodology, with the intent of modeling the larger heterocyclic functionalities found in coal. DFT results were calibrated against CBS-QB3 calculations, and qualitative trends were reproduced between these methods. Loss of hydrogen at the benzylic position provided the most favorable route to radical formation, for both the azabenzenes and five-membered heterocycles. The ethyl derivatives had lower BDE values than the methyl derivatives due to increased stabilization of the corresponding radicals. Calculated spin densities correlated well with bond dissociation enthalpies for these compounds, while geometric effects were minimal with respect to the heterocycles themselves. Temperature effects on the bond dissociation enthalpies were minor, ranging by about 5 kcal/mol from 298 to 2000 K; the free energies of reaction dropped significantly over the same range due to entropic effects. Monocyclic heteroaromatic rings were seen to replicate the chemistry of multicyclic heteroaromatic systems.

  15. Nikola Tesla, the Ether and his Telautomaton

    NASA Astrophysics Data System (ADS)

    Milar, Kendall

    2014-03-01

    In the nineteenth century physicists' understanding of the ether changed dramatically. New developments in thermodynamics, energy physics, and electricity and magnetism dictated new properties of the ether. These have traditionally been examined from the perspective of the scientists re-conceptualizing the ether. However Nikola Tesla, a prolific inventor and writer, presents a different picture of nineteenth century physics. Alongside the displays that showcased his inventions he presented alternative interpretations of physical, physiological and even psychical research. This is particularly evident in his telautomaton, a radio remote controlled boat. This invention and Tesla's descriptions of it showcase some of his novel interpretations of physical theories. He offered a perspective on nineteenth century physics that focused on practical application instead of experiment. Sometimes the understanding of physical theories that Tesla reached was counterproductive to his own inventive work; other times he offered new insights. Tesla's utilitarian interpretation of physical theories suggests a more scientifically curious and invested inventor than previously described and a connection between the scientific and inventive communities.

  16. Biodegradation of glycol ethers in soil

    SciTech Connect

    Gonsior, S.J.; West, R.J.

    1995-08-01

    Because of the widespread use of glycol ethers in applications ranging from consumer products to use as chemical intermediates, there is a need to better understand the fate of these compounds in the environment. Soil biodegradation studies were conducted for three propylene glycol ethers: 1-methoxy-2-propanol, 1-phenoxy-2-propanol, and 1-methoxy-2-propanol acetate. The test compounds were labeled with carbon-14 at either the methoxy or phenoxy substituents. Biodegradation of the three compounds was observed in two sandy loam soils. The time required for disappearance of 50% of the test compounds ranged from < 1 d at 0.2 ppm (w/w) to <7 d at 107 ppm. Degradation rates were slower in a sandy soil, reflecting the lower concentration of microorganisms present. No significant accumulation of intermediate products was observed, and ultimate yields of {sup 14}CO{sub 2} were in the range of 40 to 65% of the initial concentration. Results indicated that the glycol ethers were degraded in a variety of soils under aerobic conditions.

  17. Structure-activity studies on organoselenium alkylating agents.

    PubMed

    Kang, S I; Spears, C P

    1990-01-01

    A variety of organoselenium alkylating agents were synthesized, using 2-hydroxyethyl and 3-hydroxypropyl selenocyanate intermediates, and studied to determine their chemical reactivities with 4-(4-nitrobenzyl)pyridine (NBP) and cytotoxicities against CCRF-CEM, L1210/0, and L1210/L-PAM cells. The comparison between the 2-chloroethyl sulfides and selenides 1-4 revealed the markedly enhanced nucleophilicity of selenium (Se) over sulfur (S) by two or more orders of magnitude. This finding indicates that a major consideration in the design of antitumor alkylating organoselenides is the reactivity of selenium. A Taft plot of the experimental first-order rate constant, knbp, and sigma* in a series of 2-chloroethylseleno compounds gave a slope of -1.73 (rho*), with the exception of 2-chloroethyl 2-nitrophenyl selenide (10). The anomalous behavior of 10 is explained in terms of the ortho-nitro stabilization effect directly interacting with the selenium atom of ethyleneselenonium ion to form a 5-membered cyclic intermediate. In the same series, a 5000-fold difference in alkylating reactivity offered only a sixfold variation in cytotoxicity against CCRF-CEM cells. Increasing the alkylating chain length from ethlene to propylene units markedly reduced alkylating reactivities. In the CH3Se(CH2)n Cl series, 16 (n = 3) was 1.5 X 10(5) times slower than 2 (n = 2) in NBP alkylation, revealing that 3-chloro-n-propyl selenides are not chemically reactive enough to be biological alkylating agents despite the presence of the highly nucleophilic selenium atom. Replacement of chloride with mesylate in 3-substituted propyl selenides, such as 17 and 20, restored desirable reactivities and cytotoxicities. PMID:2313578

  18. Chemistry and adhesive properties of poly(arylene ether)s containing heterocyclic units

    NASA Technical Reports Server (NTRS)

    Connell, John W.

    1991-01-01

    Novel poly(arylene ether)s containing heterocyclic units were prepared, characterized, and evaluated as adhesives and composite matrices. The polymers were prepared by reacting a heterocyclic bisphenol with an activated aromatic dihalide in a polar aprotic solvent, using potassium carbonate. The polymerizations were generally carried out in N,N-dimethylacetamide at 155 C. In some cases, where the polymers were semicrystalline, higher temperatures and thus higher boiling solvents were necessary to keep the polymers in solution. Heterocyclic rings incorporated into the poly(arylene ether) backbone include phenylquinoxaline, phenylimidazole, benzimidazole, benzoxazole, 1,3,4-oxadiazole, and 1,2,4-triazole. The polymers were characterized by differential scanning calorimetry, solution viscosity, X-ray diffraction, thin film, and adhesive and (in some cases) composite properties. The glass transition temperatures, crystalline melt temperature, solubility, and mechanical properties varied depending upon the heterocyclic ring. The chemistry and properties of these materials are discussed.

  19. Azidated Ether-Butadiene-Ether Block Copolymers as Binders for Solid Propellants

    NASA Astrophysics Data System (ADS)

    Cappello, Miriam; Lamia, Pietro; Mura, Claudio; Polacco, Giovanni; Filippi, Sara

    2016-07-01

    Polymeric binders for solid propellants are usually based on hydroxyl-terminated polybutadiene (HTPB), which does not contribute to the overall energy output. Azidic polyethers represent an interesting alternative but may have poorer mechanical properties. Polybutadiene-polyether copolymers may combine the advantages of both. Four different ether-butadiene-ether triblock copolymers were prepared and azidated starting from halogenated and/or tosylated monomers using HTPB as initiator. The presence of the butadiene block complicates the azidation step and reduces the storage stability of the azidic polymer. Nevertheless, the procedure allows modifying the binder properties by varying the type and lengths of the energetic blocks.

  20. Development of quantitative structure property relationships for poly(arylene ether)s.

    PubMed

    Hamerton, I; Howlin, B J; Larwood, V

    1995-02-01

    The technique of quantitative structure-activity relationships (QSAR) is well accepted by the drug design community. The analogous technique of quantitative structure-property relationships (QSPR) has applications in the field of polymer chemistry. A variety of molecular modeling and molecular orbital techniques was used to find molecular descriptors that could be used to derive an empirical equation to describe the glass transition temperature of two related classes of poly(arylene ether)s. The derived equation was then used to predict the thermal characteristics of another polymer of the same type. PMID:7794828

  1. Electroless nickel-phosphorus coating on poly (ether ether ketone)/carbon nanotubes composite

    NASA Astrophysics Data System (ADS)

    Zhai, Tong; Di, Lizhi; Yang, De'an

    2014-05-01

    In order to improve electromagnetic shielding property of poly (ether ether ketone)/carbon nanotubes composite, a nickel-phosphorus coating was covered on the composite by electroless plating. The morphologies of the substrates and the coatings were characterized by SEM. XPS was performed to analyze the surface composition and chemical states before and after chemical etching. The results showed that lots of microscopic holes appeared and evenly distributed on the surface, and the concentration of hydrophilic groups on the surface increased after the composite was etched. Thermal shock test showed that the adhesive strength between the coating and the composite was good.

  2. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  3. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  4. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  5. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  6. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  7. N-Alkyl-, 1-C-Alkyl-, and 5-C-Alkyl-1,5-dideoxy-1,5-imino-(L)-ribitols as Galactosidase Inhibitors.

    PubMed

    Front, Sophie; Gallienne, Estelle; Charollais-Thoenig, Julie; Demotz, Stéphane; Martin, Olivier R

    2016-01-01

    A series of 1,5-dideoxy-1,5-imino-(l)-ribitol (DIR) derivatives carrying alkyl or functionalized alkyl groups were prepared and investigated as glycosidase inhibitors. These compounds were designed as simplified 4-epi-isofagomine (4-epi-IFG) mimics and were expected to behave as selective inhibitors of β-galactosidases. All compounds were indeed found to be highly selective for β-galactosidases versus α-glycosidases, as they generally did not inhibit coffee bean α-galactosidase or other α-glycosidases. Some compounds were also found to be inhibitors of almond β-glucosidase. The N-alkyl DIR derivatives were only modest inhibitors of bovine β-galactosidase, with IC50 values in the 30-700 μM range. Likewise, imino-L-ribitol substituted at the C1 position was found to be a weak inhibitor of this enzyme. In contrast, alkyl substitution at C5 resulted in enhanced β-galactosidase inhibitory activity by a factor of up to 1000, with at least six carbon atoms in the alkyl substituent. Remarkably, the 'pseudo-anomeric' configuration in this series does not appear to play a role. Human lysosomal β-galactosidase from leukocyte lysate was, however, poorly inhibited by all iminoribitol derivatives tested (IC50 values in the 100 μM range), while 4-epi-IFG was a good inhibitor of this enzyme. Two compounds were evaluated as pharmacological chaperones for a GM1-gangliosidosis cell line (R301Q mutation) and were found to enhance the mutant enzyme activity by factors up to 2.7-fold. PMID:26644389

  8. Alkyl polycyclic aromatic hydrocarbons emissions in diesel/biodiesel exhaust

    NASA Astrophysics Data System (ADS)

    Casal, Carina S.; Arbilla, Graciela; Corrêa, Sergio M.

    2014-10-01

    Polycyclic aromatic hydrocarbons (PAHs) are widely studied in environmental matrices, such as air, water, soil and sediment, because of their toxicity, mutagenicity and carcinogenicity. Because of these properties, the environmental agencies of developed countries have listed sixteen PAHs as priority pollutants. Few countries have limits for these compounds for ambient air, but they only limit emissions from stationary and mobile sources and occupational areas. There are several studies to specifically address the 16 priority PAHs and very little for the alkyl PAHs. These compounds are more abundant, more persistent and frequently more toxic than the non-alkylated PAHs, and the toxicity increases with the number of alkyl substitutions on the aromatic ring. In this study, a method was developed for the analysis of PAHs and alkyl PAHs by using a GC-MS and large injection volume injection coupled with program temperature vaporisation, which allows for limits of detection below 1.0 ng μL-1. Several variables were tested, such as the injection volume, injection velocity, injector initial temperature, duration of the solvent split and others. This method was evaluated in samples from particulate matter from the emissions of engines employing standard diesel, commercial diesel and biodiesel B20. Samples were collected on a dynamometer bench for a diesel engine cycle and the results ranged from 0.5 to 96.9 ng mL-1, indicating that diesel/biodiesel makes a significant contribution to the formation of PAHs and alkyl PAHs.

  9. Divinyl ether synthase gene and protein, and uses thereof

    DOEpatents

    Howe, Gregg A.; Itoh, Aya

    2011-09-13

    The present invention relates to divinyl ether synthase genes, proteins, and methods of their use. The present invention encompasses both native and recombinant wild-type forms of the synthase, as well as mutants and variant forms, some of which possess altered characteristics relative to the wild-type synthase. The present invention also relates to methods of using divinyl ether synthase genes and proteins, including in their expression in transgenic organisms and in the production of divinyl ether fatty acids, and to methods of suing divinyl ether fatty acids, including in the protection of plants from pathogens.

  10. Divinyl ether synthase gene, and protein and uses thereof

    DOEpatents

    Howe, Gregg A.; Itoh, Aya

    2006-12-26

    The present invention relates to divinyl ether synthase genes, proteins, and methods of their use. The present invention encompasses both native and recombinant wild-type forms of the synthase, as well as mutants and variant forms, some of which possess altered characteristics relative to the wild-type synthase. The present invention also relates to methods of using divinyl ether synthase genes and proteins, including in their expression in transgenic organisms and in the production of divinyl ether fatty acids, and to methods of suing divinyl ether fatty acids, including in the protection of plants from pathogens.

  11. Functionalized poly(arylene ethers) as toughness modifiers for bismaleimides

    NASA Technical Reports Server (NTRS)

    Stenzenberger, H. D.; Roemer, W.; Hergenrother, P. M.; Jensen, B.; Breitigam, W.

    1990-01-01

    A family of novel, low molecular weight functionalized poly(arylene ether) resins has been investigated to ascertain its members' toughness-imparting contribution to neat bismaleimide (BMI) resin and BMI-matrix laminate composite properties. Attention is given to the contribution of the reactive poly(arylene ether)'s backbone chemistry to fracture toughness, as well as to the comparative influence of high and low molecular weight reactive poly(arylene ether) types on the modified BMI resin systems. The modified BMIs possess a polyphase morphology, with good adhesion between the thermoplastic nodules and the host thermoset systems.

  12. Ether Cleavage Re-Investigated: Elucidating the Mechanism of BBr3-Facilitated Demethylation of Aryl Methyl Ethers

    PubMed Central

    Kosak, Talon M; Conrad, Heidi A; Korich, Andrew L; Lord, Richard L

    2015-01-01

    One of the most well-known, highly utilized reagents for ether cleavage is boron tribromide (BBr3), and this reagent is frequently employed in a 1:1 stoichiometric ratio with ethers. Density functional theory calculations predict a new mechanistic pathway involving charged intermediates for ether cleavage in aryl methyl ethers. Moreover, these calculations predict that one equivalent of BBr3 can cleave up to three equivalents of anisole, producing triphenoxyborane [B(OPh)3] prior to hydrolysis. These predictions were validated by gas chromatography analysis of reactions where the BBr3:anisole ratio was varied. Not only do we confirm that sub-stoichiometric equivalents may be used for ether demethylation, but the findings also support our newly proposed three cycle mechanism for cleavage of aryl methyl ethers. PMID:26693209

  13. When alcohol is the answer: Trapping, identifying and quantifying simple alkylating species in aqueous environments.

    PubMed

    Penketh, Philip G; Shyam, Krishnamurthy; Baumann, Raymond P; Zhu, Rui; Ishiguro, Kimiko; Sartorelli, Alan C; Ratner, Elena S

    2016-09-01

    Alkylating agents are a significant class of environmental carcinogens as well as commonly used anticancer therapeutics. Traditional alkylating activity assays have utilized the colorimetric reagent 4-(4-nitrobenzyl)pyridine (4NBP). However, 4NBP based assays have a relatively low sensitivity towards harder, more oxophilic alkylating species and are not well suited for the identification of the trapped alkyl moiety due to adduct instability. Herein we describe a method using water as the trapping agent which permits the trapping of simple alkylating electrophiles with a comparatively wide range of softness/hardness and permits the identification of donated simple alkyl moieties. PMID:27188264

  14. Alkyl substituent effect on density, viscosity and chemical behavior of 1-alkyl-3-methylimidazolium chloride.

    PubMed

    Olmo, Lourdes del; Lage-Estebanez, Isabel; López, Rafael; García de la Vega, José M

    2014-09-01

    Molecular structure of the conformers of 1-C n -3-methylimidazolium chloride (n = 1 to 4) ionic liquids has been explored and the relationships with density and viscosity have been studied using COSMO related methodologies. Effects of the number of conformers, ionic character, anion-cation relative positions and the alkyl chain length of the cation on predictions of properties have been analyzed. The quality of the predictions has been tested by comparing with experimental results. Moreover, COSMO polarization charge densities, σ-profiles and σ-potentials of the conformers have been analyzed. Predictions on the chemical behavior based on the values of these properties in the conformers have been used to elucidate the affinity for electrophilic and nucleophilic reagents of ionic liquids. PMID:25149437

  15. Catalytic synthesis of n-alkyl arenes through alkyl group cross-metathesis.

    PubMed

    Dobereiner, Graham E; Yuan, Jian; Schrock, Richard R; Goldman, Alan S; Hackenberg, Jason D

    2013-08-28

    n-Alkyl arenes were prepared in a one-pot tandem dehydrogenation/olefin metathesis/hydrogenation sequence directly from alkanes and ethylbenzene. Excellent selectivity was observed when ((tBu)PCP)IrH2 was paired with tungsten monoaryloxide pyrrolide complexes such as W(NAr)(C3H6)(pyr)(OHIPT) (1a) [Ar = 2,6-i-Pr2C6H3; pyr = pyrrolide; OHIPT = 2,6-(2,4,6-i-Pr3C6H2)2C6H3O]. Complex 1a was also especially active in n-octane self-metathesis, providing the highest product concentrations reported to date. The thermal stability of selected olefin metathesis catalysts allowed elevated temperatures and extended reaction times to be employed. PMID:23909821

  16. The icephobic performance of alkyl-grafted aluminum surfaces.

    PubMed

    Kulinich, S A; Honda, M; Zhu, A L; Rozhin, A G; Du, X W

    2015-02-01

    This work analyzes the anti-icing performance of flat aluminum surfaces coated with widely used alkyl-group based layers of octadecyltrimethoxysilane, fluorinated alkylsilane and stearic acid as they are subjected to repeated icing/deicing cycles. The wetting properties of the samples upon long-term immersion in water are also evaluated. The results demonstrate that smooth aluminum surfaces grafted with alkyl groups are prone to gradual degradation of their hydrophobic and icephobic properties, which is caused by interactions and reactions with both ice and liquid water. This implies that alkyl-group based monolayers on aluminum surfaces are not likely to be durable icephobic coatings unless their durability in contact with ice and/or water is significantly improved. PMID:25516115

  17. Safety Assessment of Alkyl Ethylhexanoates as Used in Cosmetics.

    PubMed

    Fiume, Monice; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-01-01

    The Cosmetic Ingredient Review (CIR) Expert Panel (Panel) assessed the safety of 16 alkyl ethylhexanoates for use in cosmetics, concluding that these ingredients are safe in cosmetic formulations in the present practices of use and concentrations when formulated to be nonirritating. The alkyl ethylhexanoates primarily function as skin-conditioning agents in cosmetics. The highest concentration of use reported for any of the alkyl ethylhexanoates is 77.3% cetyl ethylhexanoate in rinse-off formulations used near the eye, and the highest leave-on use reported is 52% cetyl ethylhexanoate in lipstick formulations. The Panel reviewed available animal and clinical data related to these ingredients, and the similarities in structure, properties, functions, and uses of ingredients from previous CIR assessments on constituent alcohols that allowed for extrapolation of the available toxicological data to assess the safety of the entire group. PMID:26684798

  18. Alkylation of imidazole under ultrasound irradiation over alkaline carbons

    NASA Astrophysics Data System (ADS)

    Costarrosa, L.; Calvino-Casilda, V.; Ferrera-Escudero, S.; Durán-Valle, C. J.; Martín-Aranda, R. M.

    2006-06-01

    N-Alkyl-imidazole has been synthesized by sonochemical irradiation of imidazole and 1-bromobutane using alkaline-promoted carbons (exchanged with the binary combinations of Na, K and Cs). The catalysts were characterized by X-ray photoelectron spectroscopy, thermal analysis and N 2 adsorption isotherms. Under the experimental conditions, N-alkyl-imidazoles can be prepared with a high activity and selectivity. It is observed that imidazole conversion increases in parallel with increasing the basicity of the catalyst. The influence of the alkaline promoter, the reaction temperature, and the amount of catalyst on the catalytic activity has been studied. For comparison, the alkylation of imidazole has also been performed in a batch reactor system under thermal activation.

  19. Preparation and reactivity of macrocyclic rhodium(III) alkyl complexes

    SciTech Connect

    Carraher, Jack M.; Ellern, Arkady; Bakac, Andreja

    2013-09-21

    Macrocyclic rhodium(II) complexes LRh(H2O)(2+) (L = L-1 = cyclam and L-2 = meso-Me-6-cyclam) react with alkyl hydroperoxides RC(CH3)(2)OOH to generate the corresponding rhodium(III) alkyls L(H2O)RhR2+ (R = CH3, C2H5, PhCH2). Methyl and benzyl complexes can also be prepared by bimolecular group transfer from alkyl cobaloximes (dmgH)(2)(H2O) CoR and (dmgBF(2))(2)(H2O) CoR (R = CH3, PhCH2) to LRh(H2O)(2+). The new complexes were characterized by solution NMR and by crystal structure analysis. They exhibit great stability in aqueous solution at room temperature, but undergo efficient Rh-C bond cleavage upon photolysis. (C) 2013 Elsevier B.V. All rights reserved.

  20. Structural features of a series of S-alkylated and non-S-alkylated aminothiolate nickel(II) complexes

    NASA Astrophysics Data System (ADS)

    Chohan, B. S.

    2014-12-01

    The structural aspects of a family of S-alkylated complexes, generated by reacting iodoacetamide or iodoethanol with two mononuclear Ni(II) diaminodithiolate complexes are discussed. The S-alkylation reactions were investigated with particular attention paid to the size of the chelate ring that straps the N,N'-methylamine donors. In one complex the N-methyl groups are cis to each other and in the other they are trans. Both complexes undergo S-alkylation with two equivalents of either reagent, that coordinates through the pendant oxygen to the Ni(II), forming dications with an N2S2O2 ligand donor set. Crystal structures of [NiC12H26N4O2S2]I2 · MeOH, [NiC12H28N2O2S2]I2, and [NiC13H30N2O2S2]I2 · 1/2 MeOH, are determined by single crystal X-ray analysis. The N-methyl groups in each of the alkylated derivatives are trans to each other, suggesting that the cis configuration is highly unfavored for such complexes in octahedral conformation. Crystal packing data shows that each of the alkylated complexes interacts closely with the iodide counterions, and with solvent if present; some of these interactions include H-bonds. Only the iodoacetamide derivative shows any significant interaction with a neighboring molecule.

  1. Novel high T{sub g} high-strength poly(aryl ether)s

    SciTech Connect

    Banerjee, S.; Maier, G.

    1999-08-01

    A novel 2-perfluoroalkyl-activated bisfluoro monomer has been synthesized successfully using a Pd(0)-catalyzed cross-coupling reaction of 4-fluoro-3-trifluoromethyl phenyl boronic acid with 4,4{prime}-dibromodiphenylbenzene. This monomer was converted to novel poly(aryl ether)s by nucleophilic displacement of the fluorine atoms on the benzene ring with several bisphenols. The products obtained by displacement of the fluorine atoms exhibit weight average molar masses up to 1.06 {times} 10{sup 5} g/mol in GPC. These poly(aryl ether)s showed outstanding thermooxidative stability up to 534 C for 5% weight loss in TGA under synthetic air and high glass transition temperatures (T{sub g}) even up to 300 C in DSC and DMTA. These polymers are soluble in a wide range of organic solvents, e.g., CHCl{sub 3}, THF, NMP, DMF, toluene, etc., and are insoluble in DMSO and acetone. Transparent thin films of these polymers cast from DMF exhibited tensile strengths up to 115 MPa, moduli up to 2.59 GPa, and elongations up to 120% depending on their exact repeating unit structures. These values are comparable to those of high performance thermoplastic materials such as PEEK or Ultem PEI.

  2. Novel high T[sub g] high-strength poly(aryl ether)s

    SciTech Connect

    Banerjee, S.; Maier, G. . Lehrstuhl fuer Makromolekulare Stoffe)

    1999-08-01

    A novel 2-perfluoroalkyl-activated bisfluoro monomer has been synthesized successfully using a Pd(0)-catalyzed cross-coupling reaction of 4-fluoro-3-trifluoromethyl phenyl boronic acid with 4,4[prime]-dibromodiphenylbenzene. This monomer was converted to novel poly(aryl ether)s by nucleophilic displacement of the fluorine atoms on the benzene ring with several bisphenols. The products obtained by displacement of the fluorine atoms exhibit weight average molar masses up to 1.06 [times] 10[sup 5] g/mol in GPC. These poly(aryl ether)s showed outstanding thermooxidative stability up to 534 C for 5% weight loss in TGA under synthetic air and high glass transition temperatures (T[sub g]) even up to 300 C in DSC and DMTA. These polymers are soluble in a wide range of organic solvents, e.g., CHCl[sub 3], THF, NMP, DMF, toluene, etc., and are insoluble in DMSO and acetone. Transparent thin films of these polymers cast from DMF exhibited tensile strengths up to 115 MPa, moduli up to 2.59 GPa, and elongations up to 120% depending on their exact repeating unit structures. These values are comparable to those of high performance thermoplastic materials such as PEEK or Ultem PEI.

  3. Unprecedented reactions: from epichlorohydrin to epoxyglycidyl substituted divinyl ether and its conversion into epoxyglycidyl propargyl ether

    PubMed Central

    Yao, Yiwu; Li, Zheng; Qiu, Yatao; Bai, Jinhong; Su, Jinyue; Zhang, Dayong; Jiang, Sheng

    2015-01-01

    The reaction of epichlorohydrin with concentrated sodium hydroxide in hexane under phase transfer conditions has surprisingly led to the formation of the symmetrical di(3-epoxyglycidyl-1-propenyl) ether 1 which contains both nucleophilic and electrophilic moieties. When it was reacted with n-butyllithium, intermediate 1 once again surprisingly generated epoxyglycidyl propargyl ether, which was further reacted in situ with a variety of benzaldehydes to furnish the corresponding substituted propargylic alcohols in good yields. While the reaction is operationally simple, it provides a powerful method for the synthesis of the important products from commodity materials such as epichlorohydrin. Moreover, these reactions may have revealed that some fundamental properties of the hydroxide anion in those once thought straightforward reactions are not well understood. A careful analysis of the experimental data suggests that an unprecedented concerted elimination of the epoxyglycidyl ether with sodium hydroxide may be operative and an alpha deprotonation followed by alpha elimination of the di(3-epoxyglycidyl-1-propenyl) ether with alkyllithium may have been involved. PMID:26383123

  4. Brominated-chlorinated diphenyl ethers formed by thermolysis of polybrominated diphenyl ethers at low temperatures.

    PubMed

    Rupp, Silke; Metzger, Jörg W

    2005-09-01

    Polybrominated diphenyl ethers (PBDEs) are a group of brominated flame retardants (BFRs) used mainly as additives in different kinds of plastic material. Various PBDEs are found in all environmental compartments as well as in tissue and blood serum of animals and humans due to their persistence and tendency to bioaccumulate. Emission of PBDEs into the environment can occur during recycling of PBDE-containing plastic material or during their uncontrolled or insufficient combustion as e.g. in accidental fires or landfill fires. Under these circumstances, PBDEs can also function as precursor molecules for the formation of polybrominated dibenzodioxins (PBDDs) and dibenzofurans (PBDFs). In this study, we qualitatively investigated the reaction of two PBDE congeners, 2,2',4,4'-tetrabromo diphenyl ether (BDE 47) and 2,2',4,4',5,5'-hexabromo diphenyl ether (BDE 153), as well as hexabromobenzene (HBB), a flame retardant used in the past, when exposed to temperatures between 250 degrees C and 500 degrees C. The formed reaction products were analysed by high resolution gas chromatography-low resolution mass spectrometry (HRGC-LRMS). Among others brominated-chlorinated diphenyl ethers were formed by chlorodebromination of the PBDEs. In addition, thermolysis of BDE 47 and BDE 153 in the presence of tetrachloromethane as model substance for an organic chlorine source was studied. Thermal treatment of HBB resulted in the formation of brominated-chlorinated benzenes. PMID:16083771

  5. Unprecedented reactions: from epichlorohydrin to epoxyglycidyl substituted divinyl ether and its conversion into epoxyglycidyl propargyl ether

    NASA Astrophysics Data System (ADS)

    Yao, Yiwu; Li, Zheng; Qiu, Yatao; Bai, Jinhong; Su, Jinyue; Zhang, Dayong; Jiang, Sheng

    2015-09-01

    The reaction of epichlorohydrin with concentrated sodium hydroxide in hexane under phase transfer conditions has surprisingly led to the formation of the symmetrical di(3-epoxyglycidyl-1-propenyl) ether 1 which contains both nucleophilic and electrophilic moieties. When it was reacted with n-butyllithium, intermediate 1 once again surprisingly generated epoxyglycidyl propargyl ether, which was further reacted in situ with a variety of benzaldehydes to furnish the corresponding substituted propargylic alcohols in good yields. While the reaction is operationally simple, it provides a powerful method for the synthesis of the important products from commodity materials such as epichlorohydrin. Moreover, these reactions may have revealed that some fundamental properties of the hydroxide anion in those once thought straightforward reactions are not well understood. A careful analysis of the experimental data suggests that an unprecedented concerted elimination of the epoxyglycidyl ether with sodium hydroxide may be operative and an alpha deprotonation followed by alpha elimination of the di(3-epoxyglycidyl-1-propenyl) ether with alkyllithium may have been involved.

  6. Hydroxyalkylation with. cap alpha. -hydroperoxydiazenes. Alcohols from olefins and carbonyl compounds from enol ethers

    SciTech Connect

    Osei-Twum, E.Y.; McCallion, D.; Nazran, A.S.; Panicucci, R.; Risbood, P.A.; Warkentin, J.

    1984-01-27

    Alkyl(1-hydroperoxy-1-methylethyl)diazenes 2a-C((CH/sub 3/)/sup 2/C(OOH)N=NR: a,R =CH/sub 2/CH/sub 2/CN; c,R = CH/sub 2/CH(CH/sub 3/)CN; d,R = CH/sub 2/CH/sub 2/OCH/sub 3/; e,r =CH/sub 2/CH/sub 2/OC/sub 6/H/sub 5/; f,R = CH/sub 2/CH/sub 2/CH/sub 2/OC/sub 6/H/sub 5/)) were prepared in solution by autoxidation of the corresponding hydrazones of acetone. Thermolysis of the diazenes at 50-80/sup 0/C in alkenes leads to alcohols. For example, 2b decomposes in 1,1-diphenylethene to afford 5-hydroxy-5,5-yield. Thermolysis of a diazene 2 in an enol ether solvent leads to an aldehyde or a ketone. Thus, 2a decomposes in 1-ethoxyethene and in 2-methoxypropene to afford, respective, 4,4,4-trifluorobutanol and 5,5,5-trifluoro-intermediates and radical chain hydroxyalkylation of alkene double bonds. In one chain-propagating step, R., generated from 2, adds to the alkene. The adduct radical so formed propagates by inducing decomposition of 2 by attack at hydroxyl oxygen. According to this mechanism, inital products from enol ethers are hemiacetals or hemiketals which do not survive the reaction conditions but decompose to the corresponding carbonyl compounds. Preliminary evidence for this mechanism is presented.

  7. Comparative inhalation teratogenicity of four glycol ether solvents and an amino derivative in rats.

    PubMed Central

    Nelson, B K; Setzer, J V; Brightwell, W S; Mathinos, P R; Kuczuk, M H; Weaver, T E; Goad, P T

    1984-01-01

    Previous research demonstrated the inhalation teratogenicity of the solvent 2-ethoxyethanol in rats and rabbits. As this is one of a class of widely used industrial solvents, we investigated the teratogenicity of five structurally related compounds. Each chemical was vaporized and administered to approximately 15 pregnant rats in one to three concentrations for 7 hr/day on gestation days 7 to 15, and dams were sacrificed on day 20. Fetuses were individually weighed, and two-thirds of them were fixed in Bouin's solution and examined for soft-tissue anomalies. The other one-third were fixed in alcohol, stained with Alizarin Red and examined for skeletal defects. Data were analyzed on a litter basis; three solvents were compared with a pooled group (N = 34) of sham-exposed controls, and the remaining two were compared with a group of 15 controls. At concentrations which were apparently not maternally toxic, 2-methoxyethanol was highly embryotoxic, producing complete resorptions at 200 ppm; increased resorptions, reduced fetal weights and skeletal and cardiovascular defects occurred at both 100 and 50 ppm. 2-ethoxyethyl acetate at 600 ppm induced complete resorption of litters; 390 ppm reduced fetal weights and induced skeletal and cardiovascular defects, but only a single defect was observed at 130 ppm. 2-Butoxyethanol evidenced slight maternal toxicity at 200 ppm but produced no increase in congenital defects at that concentration. Neither 2-(2-ethoxyethoxy)ethanol (100 ppm) nor 2-methylaminoethanol (150 ppm) was maternally toxic or embryotoxic. In summary, shorter alkyl chained glycol ethers produced greater embryotoxicity than those having longer chains, and the ester produced effects equivalent to the ether, both patterns predictable from the biochemical literature. PMID:6499812

  8. Production of durene from alcohols and ethers

    SciTech Connect

    Fowles, P. E.; Yan, T. Y.

    1985-06-18

    Durene is recovered from a mixture rich in durene and containing hydrocarbons boiling in the gasoline range by cooling the mixture to a point where crystallization occurs and separating the crystallized durene. The durene subsequently is washed with a wash fluid. The wash fluid which can be methanol, is returned to a process wherein it is converted to gasoline and durene. The separated mother liquor is added to the gasoline fraction. The original mixture of durene and gasoline is obtained by the catalytic conversion of alcohols and ethers.

  9. Obstetric and Other Uses of Ether Before Ether Day, According to the Boston Medical and Surgical Journal of 1828-1846.

    PubMed

    Stoller, Sundrayah N; Minehart, Rebecca D; Alston, Theodore A

    2016-04-01

    From the inception of the Boston Medical and Surgical Journal in 1828 until the prominent public demonstration of surgical anesthesia on Ether Day of 1846, ether was often mentioned in the journal. Many of the examples were related to obstetrics. Because molecular structures were not available in the early 1800s, diverse volatile liquids were termed ethers. In addition to sulphuric ether, so-called ethers included cyanide-releasing propionitrile and ethanolic solutions of chloroform and of the potent vasodilator ethyl nitrite. Familiarity with anesthetically unsuitable ethers may have long deterred consideration of inhaled sulphuric ether for analgesia and anesthesia. PMID:27080505

  10. Direct β-Alkylation of Aldehydes via Photoredox Organocatalysis

    PubMed Central

    2015-01-01

    Direct β-alkylation of saturated aldehydes has been accomplished by synergistically combining photoredox catalysis and organocatalysis. Photon-induced enamine oxidation provides an activated β-enaminyl radical intermediate, which readily combines with a wide range of Michael acceptors to produce β-alkyl aldehydes in a highly efficient manner. Furthermore, this redox-neutral, atom-economical C–H functionalization protocol can be achieved both inter- and intramolecularly. Mechanistic studies by various spectroscopic methods suggest that a reductive quenching pathway is operable. PMID:24754456

  11. Alkyl phospholipid antihypertensive agents in method of lowering blood pressure

    DOEpatents

    Snyder, Fred L.; Blank, Merle L.; Muirhead, Ernest E.; Leach, deceased, Byron E.; Byers, Lawrence W.

    1988-01-01

    The composition of this invention is 1-O-alkyl-2-acetoyl-sn-glycero-3-phosphocholine, having the ionic structural formula; ##STR1## wherein R is saturated alkyl having 9-21 carbon atoms, or salts or hydrates of the composition. Preferably R has 13-19 carbon atoms and most preferably R has 15 carbon atoms. The composition of this invention is useful for reducing hypertension in warm-blooded animals, including humans, when administered either orally or by injection or innoculation, e.g., intravenous injection. The composition can be prepared from naturally occurring lipids or synthetically from commercially available material.

  12. The effect of alkylating agents on model supported metal clusters

    SciTech Connect

    Erdem-Senatalar, A.; Blackmond, D.G.; Wender, I. . Dept. of Chemical and Petroleum Engineering); Oukaci, R. )

    1988-01-01

    Interactions between model supported metal clusters and alkylating agents were studied in an effort to understand a novel chemical trapping technique developed for identifying species adsorbed on catalyst surfaces. It was found that these interactions are more complex than had previously been suggested. Studies were completed using deuterium-labeled dimethyl sulfate (DMS), (CH{sub 3}){sub 2}SO{sub 4}, as a trapping agent to interact with the supported metal cluster ethylidyne tricobalt enneacarbonyl. Results showed that oxygenated products formed during the trapping reaction contained {minus}OCD{sub 3} groups from the DMS, indicating that the interaction was not a simple alkylation. 18 refs., 1 fig., 3 tabs.

  13. Molecular pharmacology of hepsulfam, NSC 3296801: identification of alkylated nucleosides, alkylation site, and site of DNA cross-linking.

    PubMed

    Streeper, R T; Cotter, R J; Colvin, M E; Hilton, J; Colvin, O M

    1995-04-01

    We have determined that hepsulfam, in common with its structural homologue busulfan, alkylates both free guanosine and GMP in DNA at the 7 nitrogen. Mass spectral analysis of the products of the reaction of hepsulfam with guanosine has identified the mono- and bis-alkylated guanosine adducts. UV spectrophotometry and mass spectrometry were used to confirm that alkylation occurred at the 7 nitrogen by following the formation of the formamidopyrimidyl form of the hepsulfam-guanosine adduct at high pH. We have also isolated and identified 1-guanyl,7-hydroxyheptane, 1-guanyl,7-sulfamylheptane, and 1,7-bis(guanyl)heptane from in vitro reaction mixtures of hepsulfam and calf thymus DNA. We have isolated bis-(7-formamidopyrimidyldeoxyguanosinyl)-heptane from an enzymatic digest of DNA treated with hepsulfam. Finally, we have found that hepsulfam forms interstrand cross-links at 5'-GXC-3' sites in model oligonucleotides. PMID:7882358

  14. Immobilization of Lipases on Alkyl Silane Modified Magnetic Nanoparticles: Effect of Alkyl Chain Length on Enzyme Activity

    PubMed Central

    Wang, Jiqian; Meng, Gang; Tao, Kai; Feng, Min; Zhao, Xiubo; Li, Zhen; Xu, Hai; Xia, Daohong; Lu, Jian R.

    2012-01-01

    Background Biocatalytic processes often require a full recycling of biocatalysts to optimize economic benefits and minimize waste disposal. Immobilization of biocatalysts onto particulate carriers has been widely explored as an option to meet these requirements. However, surface properties often affect the amount of biocatalysts immobilized, their bioactivity and stability, hampering their wide applications. The aim of this work is to explore how immobilization of lipases onto magnetite nanoparticles affects their biocatalytic performance under carefully controlled surface modification. Methodology/Principal Findings Magnetite nanoparticles, prepared through a co-precipitation method, were coated with alkyl silanes of different alkyl chain lengths to modulate their surface hydrophobicity. Candida rugosa lipase was then directly immobilized onto the modified nanoparticles through hydrophobic interaction. Enzyme activity was assessed by catalytic hydrolysis of p-nitrophenyl acetate. The activity of immobilized lipases was found to increase with increasing chain length of the alkyl silane. Furthermore, the catalytic activities of lipases immobilized on trimethoxyl octadecyl silane (C18) modified Fe3O4 were a factor of 2 or more than the values reported from other surface immobilized systems. After 7 recycles, the activities of the lipases immobilized on C18 modified nanoparticles retained 65%, indicating significant enhancement of stability as well through hydrophobic interaction. Lipase immobilized magnetic nanoparticles facilitated easy separation and recycling with high activity retaining. Conclusions/Significance The activity of immobilized lipases increased with increasing alkyl chain length of the alkyl trimethoxy silanes used in the surface modification of magnetite nanoparticles. Lipase stability was also improved through hydrophobic interaction. Alkyl silane modified magnetite nanoparticles are thus highly attractive carriers for enzyme immobilization

  15. IRIS Toxicological Review of Decabromodiphenyl Ether (2008 Final)

    EPA Science Inventory

    EPA is announcing the release of the final report, Toxicological Review of Decabromodiphenyl Ether: in support of the Integrated Risk Information System (IRIS). The updated Summary for Decabromodiphenyl Ether and accompanying Quickview have also been added to the IRIS Data...

  16. 48. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, 5TH LEVEL, LOOKING NORTH AT ETHER AND ALCOHOL CONDENSERS AT TOP OF TOWER. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  17. Process for producing dimethyl ether from synthesis gas

    DOEpatents

    Pierantozzi, R.

    1985-06-04

    This invention pertains to a Fischer Tropsch process for converting synthesis gas to an oxygenated hydrocarbon with particular emphasis on dimethyl ether. Synthesis gas comprising carbon monoxide and hydrogen are converted to dimethyl ether by carrying out the reaction in the presence of an alkali metal-manganese-iron carbonyl cluster incorporated onto a zirconia-alumina support.

  18. 29 CFR 1926.1108 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false bis-Chloromethyl ether. 1926.1108 Section 1926.1108 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...-Chloromethyl ether. Note: The requirements applicable to construction work under this section are identical...

  19. 29 CFR 1915.1008 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false bis-Chloromethyl ether. 1915.1008 Section 1915.1008 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1008 bis-Chloromethyl ether. Note: The requirements applicable to shipyard employment under...

  20. 29 CFR 1926.1106 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Methyl chloromethyl ether. 1926.1106 Section 1926.1106 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... § 1926.1106 Methyl chloromethyl ether. Note: The requirements applicable to construction work under...