Identification and characterization of monomeric, volatile SiCl3NH2 as product of the reaction between SiCl4 and NH3: an important intermediate on the way to silicon nitride?

PubMed

Himmel, Hans-Jörg; Schiefenhövel, Nils; Binnewies, Michael

2003-03-17

We studied the reaction of SiCl(4) with NH(3) by mass spectrometry and IR spectroscopy. By means of mass spectrometry, SiCl(3)NH(2) was for the first time identified as an intermediate generated in significant amounts in the course of the reaction. In additional experiments, SiCl(3)NH(2) was formed as a stable gaseous product of the ammonolysis of SiCl(4), and the product was identified and characterized in detail by IR spectroscopic methods (gas phase and matrix isolation) in combination with quantum-chemical calculations. The calculations also gave access to important thermodynamical data.

Synthesis and electrochemical characterization of TixTayAlzN1-δOγ for fuel cell catalyst supports

NASA Astrophysics Data System (ADS)

Wakabayashi, Ryo H.; Abruña, Héctor D.; DiSalvo, Francis J.

2017-02-01

Quinary TixTayAlzN1-δOγ of various compositions have been prepared by a co-precipitation method followed by ammonolysis. The nitride samples were examined as potential catalyst supports in polymer electrolyte membrane fuel cells. The nitride products crystallized in the rock salt (NaCl) structure over a wide range of compositions. The addition of Ta and Al was highly beneficial towards improving the chemical and electrochemical stability of TiN, without a significant loss of electrical conductivity. Platinum particles were successfully deposited on the (oxy)nitride samples, and the composite samples at some compositions were found to be comparable to Pt/carbon in their stability and catalytic activity even without optimizing the Pt deposition and dispersion processes.

2-Position base-modified analogues of adenophostin A as high-affinity agonists of the D-myo-inositol trisphosphate receptor: in vitro evaluation and molecular modeling.

PubMed

Sureshan, Kana M; Trusselle, Melanie; Tovey, Stephen C; Taylor, Colin W; Potter, Barry V L

2008-03-07

Adenophostin A (AdA) is a potent agonist of the d-myo-inositol 1,4,5-trisphosphate receptor (Ins(1,4,5)P3R). Various 2-aminopurine analogues of AdA were synthesized, all of which (guanophostin 5, 2,6-diaminopurinophostin 6, 2-aminopurinophostin 7, and chlorophostin 8) are more potent than 2-methoxy-N6-methyl AdA, the only benchmark of this class. The 2-amino-6-chloropurine nucleoside 11, from Vorbrüggen condensation of 2-amino-6-chloropurine with appropriately protected disaccharide, served as the advanced common precursor for all the analogues. Alcoholysis provided the precursor for 5, ammonolysis at high temperature the precursor for 6, and ammonolysis under mild conditions the precursor for synthesis of 7 and 8. For 8, the debenzylation of precursor leaving the chlorine untouched was achieved by judicious use of BCl3. The reduced potency of chlorophostin 8 and higher potency of guanophostin 5 in assays of Ca2+ release via recombinant Ins(1,4,5)P3R are in agreement with our model suggesting a cation-pi interaction between AdA and Ins(1,4,5)P3R. The similar potencies of 2,6-diaminopurinophostin (6) and 2-aminopurinophostin (7) concur with previous reports that the 6-NH2 moiety contributes negligibly to the potency of AdA. Molecular modeling of the 2-amino derivatives suggests an interaction between the carboxylate side chain of Glu505 of the receptor and the 2-NH2 of the ligand, but for 2-methoxy-N6-methyl AdA the carboxylate group of Glu505 is deflected away from the methoxy group. A helix-dipole interaction between the 1-phosphate of Ins(1,4,5)P3 and the 2'-phosphate of AdA with alpha-helix 6 of Ins(1,4,5)P3R is postulated. The results support a proposed model for high-affinity binding of AdA to Ins(1,4,5)P3R.

Synthesis of GaN by high-pressure ammonolysis of gallium triiodide

NASA Astrophysics Data System (ADS)

Purdy, Andrew P.; Case, Sean; Muratore, Nicole

2003-05-01

The ammonothermal conversion of GaI 3 to both cubic (zinc-blende) and hexagonal GaN was explored in detail. Gallium triiodide, anhydrous NH 3, and in some cases CuI or LiI co-mineralizers, were sealed in quartz tubes and heated in a pressurized autoclave from 300°C to 515°C. At hot-zone temperatures above 430°C, a deposit of mostly c-GaN collects in the upper portion of the tube, and deposits of phase-pure c-GaN were reliably produced on a 50-60 mg scale when CuI co-mineralizer was added. Crystal morphologies of these microcrystalline c-GaN products are highly dependent on growth conditions and range from triangular prisms to triangular plates, dendritic crystals, and irregular particles. Hexagonal GaN products were either in the form of microrods or micron sized prisms. Nanorods, of presumably h-GaN, also formed in some reactions in low yields, intermixed with microcrystalline c-GaN products.

Crystal structure of rubidium methyl-diazo-tate.

PubMed

Grassl, Tobias; Korber, Nikolaus

2017-02-01

The title compound, Rb + ·H 3 CN 2 O - , has been crystallized in liquid ammonia as a reaction product of the reductive ammonolysis of the natural compound streptozocin. Elemental rubidium was used as reduction agent as it is soluble in liquid ammonia, forming a blue solution. Reductive bond cleavage in biogenic materials under kinetically controlled conditions offers a new approach to gain access to sustainably produced raw materials. The anion is nearly planar [dihedral angle O-N-N-C = -0.4 (2)°]. The Rb + cation has a coordination number of seven, and coordinates to five anions. One anion is bound via both its N atoms, one by both O and N, two anions are bound by only their O atoms, and the last is bound via the N atom adjacent to the methyl group. The diazo-tate anions are bridged by cations and do not exhibit any direct contacts with each other. The cations form corrugated layers that propagate in the (-101) plane.

Synthesis of the antileukemic compound N,N(11)-[5-[bis(2-chloroethyl)amino]-1, 3-phenylene]bisurea.

PubMed

Denny, G H; Ryder, M A; DeMarco, A M; Babson, R D

1976-03-01

Conversion of 5-nitro-1, 3-benzenedicarboxylic acid (1) to the diamide 2 followed by hypochlorite rearrangement to the idamine 3 and subsequent reaction with acetic anhydride gave the bisacetamide 4. Reduction to the amine 5 followed by treatment with ethylene oxide formed the diol 6. The latter was converted to the bistosylate 7, which undrewent facile displacement with lithium chloride in acetone to give the mustard 8. Removal of the acetyl groups with hydrochloric acid gave 9, which reacted with potassium cyanate to provide the bisurea 10. In an alternative, but less satisfactory synthesis of 10, the compound (5-nitro-1, 3-phenylene) biscarbamic acid diphenyl ester (11), or the corresponding diethyl ester 12, was converted by ammonolysis to 13. The nitrodiurea 13 was next reduced to the amine 14, the hydrochloride of which reacted with ethylene oxide to give the diol 15. Treatment of the latter in dimethylformamide with N-chlorosuccinimide in the presence of triphenylphosphine gave 10 in low yield. The nitrogen mustards 8, 9 and 10 showed significant antitumor activities against P388 lymphocytic leukemia in mice.

Synthesis and electrochemical characterization of Ti{sub x}Ta{sub y}Al{sub z}N{sub 1-δ}O{sub γ} for fuel cell catalyst supports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wakabayashi, Ryo H.; Abruña, Héctor D., E-mail: hda1@cornell.edu; DiSalvo, Francis J., E-mail: fjd3@cornell.edu

2017-02-15

Quinary Ti{sub x}Ta{sub y}Al{sub z}N{sub 1-δ}O{sub γ} of various compositions have been prepared by a co-precipitation method followed by ammonolysis. The nitride samples were examined as potential catalyst supports in polymer electrolyte membrane fuel cells. The nitride products crystallized in the rock salt (NaCl) structure over a wide range of compositions. The addition of Ta and Al was highly beneficial towards improving the chemical and electrochemical stability of TiN, without a significant loss of electrical conductivity. Platinum particles were successfully deposited on the (oxy)nitride samples, and the composite samples at some compositions were found to be comparable to Pt/carbon inmore » their stability and catalytic activity even without optimizing the Pt deposition and dispersion processes. - Graphical abstract: The effect of additions of Ta and Al into TiN structure. Shifts the lattice constant, and increases its chemical stability in acidic environment.« less

Radiosynthesis of [13N]dantrolene, a positron emission tomography probe for breast cancer resistant protein, using no-carrier-added [13N]ammonia.

PubMed

Kumata, Katsushi; Ogawa, Masanao; Takei, Makoto; Fujinaga, Masayuki; Yoshida, Yuichiro; Nengaki, Nobuki; Fukumura, Toshimitsu; Suzuki, Kazutoshi; Zhang, Ming-Rong

2012-01-01

Dantrolene (1) is a substrate for breast cancer resistant protein, which is widely distributed in the blood-brain-barrier, intestine, gall bladder, and liver. PET study with 1 labeled with a positron emitter can be used to visualize BCRP and to elucidate the effect of BCRP on the pharmacokinetics of drugs. The objective of this study was to label 1 using nitrogen-13 ((13)N, a positron emitter; half-life: 9.9min). Using no-carrier-added [(13)N]NH(3) as the labeling agent, we synthesized [(13)N]dantrolene ([(13)N]1) for the first time. The reaction of carbomyl chloride 2b with [(13)N]NH(3) gave an unsymmetrical urea [(13)N]3, followed by cyclization of [(13)N]3 to afford [(13)N]1. Due to its instability, 2b was prepared in situ by treating amine 5 with triphosgene in a ratio of 4 to 1 and used for subsequent [(13)N]ammonolysis without purification. Copyright © 2011 Elsevier Ltd. All rights reserved.

Is nucleophilic cleavage chemistry practical for 4-membered heterocycles?

PubMed

Banks, Harold D

2009-11-07

A computational study at the MP2(Full)/6-311++G(d,p)//MP2(Full)/6-31+G(d) level of the ammonolysis of halogen substituted azetidines, oxetanes and thietanes was performed in the gas phase and in the commonly used solvent, acetonitrile. Using the free energy of activation of a benchmark reaction for evaluation of synthetic viability, several haloazetidines and oxetanes that possessed the required reactivity were identified; however, no substituted thietane investigated herein was determined to be synthetically useful under the mild conditions selected for this study. In the case of the azetidines, the side reaction of displacement of halide ion was determined to be the preferred reaction course in acetonitrile; however, the amino product of the reactions of the 2-haloazetidines cleaved at an acceptable rate under mild conditions. For the oxetane derivatives investigated, 2-fluorooxetane proved to be a direct source of ring cleavage product. Nucleophilic cleavage of halogen-substituted azetidines and oxetanes is predicted to be a viable source of functionalized three-carbon moieties under mild conditions in organic synthesis.

One-step route to a hybrid TiO2/Ti x W1-x N nanocomposite by in situ selective carbothermal nitridation.

PubMed

Schnepp, Zoë; Hollamby, Martin J; Tanaka, Masahiko; Matsushita, Yoshitaka; Katsuya, Yoshio; Sakka, Yoshio

2012-06-01

Metal oxide/nitride nanocomposites have many existing and potential applications, e.g. in energy conversion or ammonia synthesis. Here, a hybrid oxide/nitride nanocomposite (anatase/Ti x W 1- x N) was synthesized by an ammonia-free sol-gel route. Synchrotron x-ray diffraction, complemented with electron microscopy and thermogravimetric analysis, was used to study the structure, composition and mechanism of formation of the nanocomposite. The nanocomposite contained nanoparticles (<5 nm diameter) of two highly intermixed phases. This was found to arise from controlled nucleation and growth of a single oxide intermediate from the gel precursor, followed by phase separation and in situ selective carbothermal nitridation. Depending on the preparation conditions, the composition varied from anatase/Ti x W 1- x N at low W content to an isostructural mixture of Ti-rich and W-rich Ti x W 1- x N at high W content. In situ selective carbothermal nitridation offers a facile route to the synthesis of nitride-oxide nanocomposites. This conceptually new approach is a significant advance from previous methods, which generally require ammonolysis of a pre-synthesized oxide.

Preparation of niobium based oxynitride nanosheets by exfoliation of Ruddlesden-Popper phase precursor

NASA Astrophysics Data System (ADS)

da Silva Maia, Ary; Cheviré, François; Demange, Valérie; Bouquet, Valérie; Pasturel, Mathieu; Députier, Stéphanie; Lebullenger, Ronan; Guilloux-Viry, Marylline; Tessier, Franck

2016-04-01

A new oxynitride Ruddlesden-Popper phase K1.6Ca2Nb3O9.4N0.6.1.1H2O was synthesized by the topochemical ammonolysis reaction at 700 °C from the oxide Dion-Jacobson phase KCa2Nb3O10 in the presence of K2CO3. The oxynitride showed good stability with a little loss of nitrogen, even after a few months of exposure to air. Its crystal structure was solved by Rietveld refinement of X-ray powder diffraction data in space group P4/mmm and considering a two-phase mixture, due to the difference in the degree of hydration, with a = 3.894(2) Å and c = 17.90(8) Å for the most hydrated phase and a = 3.927(6) Å and c = 17.09(2) Å for the less one. Optical band gaps were measured by diffuse reflectance in the UV-Visible range indicating a red shift of Eg to the visible region. The oxynitride layered perovskite was then protonated and exfoliated into nanosheets. TEM images and SAED patterns of the nanosheets proved that exfoliation was successful, showing lattice parameters quite compatible with the Rietveld refinement.

The impact of carbon coating on the synthesis and properties of α"–Fe 16N 2 powders

DOE PAGES

Bridges, Craig A.; Brady, Michael P.; Rios, Orlando; ...

2016-04-18

This study presents the preparation of carbon composite Fe 16N 2 powders, and the influence of a protective carbon coating on the yield and magnetic properties of Fe 16N 2. Nanoparticle precursors with and without carbon were reacted under ammonia gas flow to produce Fe 16N 2. X-ray diffraction indicates that the powders contain typically 50-60% Fe 16N 2, with the remaining phases being unreacted iron, Fe 4N or Fe 3N. Transmission electron microscopy demonstrates that the carbon coating is effective atnd reducing the level of sintering of Fe nanoparticles during the reduction stage prior to ammonolysis to form Femore » nanoparticles. In situ TEM was used to observe loss of ordering in the nitrogen sublattice of carbon composite Fe 16N 2 powders in the range of 168 °C to 200 °C. Magnetic susceptibility measurements show maximum values for saturation magnetization in the range of 232 emu/g -1, and for coercivity near 930 Oe, for samples measured up to 2T applied field at 300K.« less

Liquid-chromatography thermospray mass-spectrometric study of n-acylamino dilactones and 4-butyrolactones derived from Antimycin-A

USGS Publications Warehouse

Abidi, S.L.; Ha, S.C.; Rosen, R.T.

1990-01-01

Reversed-phase high-performance liquid chromatography—thermospray mass spectrometric (HPLC—MS) characteristics of four sets of lactonic complexes (one 4-butyrolactones and three dilactone complexes) derived from antimycin A were investigated. Three types of 8-hydroxy analogues were also included in the study. Pairs of a–b structures isomeric at the 8-acyloxy ester side-chains were best separated with a high-efficiency octadecylsilica column prior to analysis by HPLC—MS. Mass spectra of the a–b pairs each with identical molecular weights exhibited virtually indistinguishable fragmentation patterns, although their relative intensities were not superimposable. In some cases, HPLC—MS of the title compounds yielded mass chromatograms showing the minor components more easily recognizable than the HPLC—UV counter parts because of the apparent higher ionization efficiency of the minor isomers and increased resolution of subcomponents in the MS system. Under the mobile phase conditions employed, analyte ionization occurred with variable degrees of gas phase ammonolysis depending upon the ammonia concentration of the buffer. Potential applicability of the on-line HPLC—MS technique for the characterization of components in mixtures of antimycin analogues and isomers is demonstrated.

Sol-gel analogous aminolysis-ammonolysis of chlorosilanes to chlorine-free Si/(C)/N-materials.

PubMed

Wiltzsch, Conny; Wagler, Jörg; Roewer, Gerhard; Kroke, Edwin

2009-07-28

Large amounts of chlorosilanes, especially SiCl4 and CH3SiCl3, are produced as side-products of the industrial fabrication of solar or electronic grade silicon and the Müller-Rochow process. It was a goal of the present study to transform these compounds into useful chlorine-free precursors for Si/(C)/N ceramics via a sol-gel analogous liquid processing route. Chlorine substitution of the chlorosilanes (mixtures) with diethylamine did not yield chlorine-free products, complete reactions are only possible with lithium diethylamide. However, aminolyses with n-propylamine were successful. Transamination with ammonia was not possible with diethylaminosilanes but was with n-propylaminosilanes in various solvents. This result was attributed to steric reasons and polar interactions of the N-H groups. Colourless solid or liquid polysilazanes were obtained, depending on the silane (mixture) and the solvent. Transamination reactions of CH3Si(NH-n-Pr)3 in chloroform reproducibly yielded a cage-like oligosilazane of the composition (CH3)9Si9(NH)12N. Single crystal X-ray structure analysis revealed a seven-cyclic cluster containing four six- and three ten-membered silazane rings. This unique silazane cage as well as the other aminosilanes and the silazanes were comprehensively characterised using multi-nuclear solid state and solution NMR, elemental analyses and thermal gravimetry (TGA).

Characterization of solution-phase and gas-phase reactions in on-line electrochemistry-thermospray tandem mass spectrometry.

PubMed

Volk, K J; Yost, R A; Brajter-Toth, A

1989-07-14

Electrochemistry was used on-line with high-performance liquid chromatography-thermospray tandem mass spectrometry to provide insight into the solution-phase decomposition reactions of electrochemically generated oxidation products. Products formed during electrooxidation were monitored as the electrode potential was varied. The solution reactions which follow the initial electron transfer at the electrode are affected by the vaporizer tip temperature of the thermospray probe and the composition of the thermospray buffer. Either hydrolysis or ammonolysis reactions of the initial electrochemical oxidation products can occur with pH 7 ammonium acetate buffer. Both the electrochemically generated and the synthesized disulfide of 6-thiopurine decompose under thermospray conditions to produce 6-thiopurine and purine-6-sulfinate. Solution-phase studies indicate that nucleophilic and electrophilic substitution reactions with purine-6-sulfinate result in the formation of purine, adenine, and hypoxanthine. Products were identified and characterized by tandem mass spectrometry. This work shows the first example of high-performance liquid chromatography used on-line with electrochemistry to separate stable oxidation products prior to analysis by thermospray tandem mass spectrometry. In addition, solution-phase and gas-phase studies with methylamine show that the site of the nucleophilic and electrophilic reactions is probably inside the thermospray probe. Most importantly, these results also show that the on-line combination of electrochemistry with thermospray tandem mass spectrometry provides valuable information about redox and associated chemical reactions of biological molecules such as the structures of intermediates or products as well as providing insight into reaction pathways.

Microporosity and CO2 Capture Properties of Amorphous Silicon Oxynitride Derived from Novel Polyalkoxysilsesquiazanes

PubMed Central

Iwase, Yoshiaki; Horie, Yoji; Honda, Sawao; Daiko, Yusuke

2018-01-01

Polyalkoxysilsesquiazanes ([ROSi(NH)1.5]n, ROSZ, R = Et, nPr, iPr, nBu, sBu, nHex, sHex, cHex, decahydronaphthyl (DHNp)) were synthesized by ammonolysis at −78 °C of alkoxytrichlorosilane (ROSiCl3), which was isolated by distillation as a reaction product of SiCl4 and ROH. The simultaneous thermogravimetric and mass spectrometry analyses of the ROSZs under helium revealed a common decomposition reaction, the cleavage of the oxygen–carbon bond of the RO group to evolve alkene as a main gaseous species formed in-situ, leading to the formation of microporous amorphous Si–O–N at 550 °C to 800 °C. The microporosity in terms of the peak of the pore size distribution curve located within the micropore size range (<2 nm) and the total micropore volume, as well as the specific surface area (SSA) of the Si–O–N, increased consistently with the molecular size estimated for the alkene formed in-situ during the pyrolysis. The CO2 capture capacity at 0 °C of the Si–O–N material increased consistently with its SSA, and an excellent CO2 capture capacity of 3.9 mmol·g−1 at 0 °C and CO2 1 atm was achieved for the Si–O–N derived from DHNpOSZ having an SSA of 750 m2·g−1. The CO2 capture properties were further discussed based on their temperature dependency, and a surface functional group of the Si–O–N formed in-situ during the polymer/ceramics thermal conversion. PMID:29534056

Depleting methyl bromide residues in soil by reaction with bases.

PubMed

Xuan, Richeng; Ashworth, Daniel J; Luo, Lifang; Wang, Haizhen; Yates, Scott R

2010-12-01

Despite generally being considered the most effective soil fumigant, methyl bromide (MeBr) use is being phased out because its emissions from soil can lead to stratospheric ozone depletion. However, a large amount is still currently used due to Critical Use Exemptions. As strategies for reducing the postfumigation emissions of MeBr from soil, Ca(OH)(2), K(2)CO(3), and NH(3) were assessed as means of promoting MeBr degradation. Ammonia aqueous solution (NH(4)OH) was the most effective, because MeBr can be degraded by both hydrolysis and ammonolysis. At 20 °C, the half-lives (t(1/2)) of MeBr were 18.0, 2.5, and 1.3 h in 0.1, 1.0, and 2.0 M NH(4)OH, respectively. In 1.0 M NH(4)OH, increasing the solution temperature to 40 °C reduced the half-life of MeBr to 0.23 h. Ammonia amendment to moist soil also promoted MeBr transformation, and the MeBr degradation rate increased with increasing soil temperature. NH(4)OH (30%, 16 M) very effectively reacted with MeBr that was contained under plastic film. Under Hytibar (a virtually impermeable film, VIF), over 99.5% of the MeBr could be destroyed by 30% NH(4)OH in 8 h at 20 °C. On the basis of these results, good management practices (i.e., VIF plus NH(4)OH) could be developed for continued use of MeBr as a soil fumigant under Critical Use Exemptions, without significant emissions.

A study on the thermal conversion of scheelite-type ABO4 into perovskite-type AB(O,N)3.

PubMed

Li, Wenjie; Li, Duan; Gao, Xin; Gurlo, Aleksander; Zander, Stefan; Jones, Philip; Navrotsky, Alexandra; Shen, Zhijian; Riedel, Ralf; Ionescu, Emanuel

2015-05-07

Phase-pure scheelite AMoO4 and AWO4 (A = Ba, Sr, Ca) were thermally treated under an ammonia atmosphere at 400 to 900 °C. SrMoO4 and SrWO4 were shown to convert into cubic perovskite SrMoO2N and SrWO1.5N1.5, at 700 °C and 900 °C respectively, and to form metastable intermediate phases (scheelite SrMoO4-xNx and SrWO4-xNx), as revealed by X-ray diffraction (XRD), elemental analysis and FTIR spectroscopy. High-temperature oxide melt solution calorimetry reveals that the enthalpy of formation for SrM(O,N)3 (M = Mo, W) perovskites is less negative than that of the corresponding scheelite oxides, though the conversion of the scheelite oxides into perovskite oxynitrides is thermodynamically favorable at moderate temperatures. The reaction of BaMO4 with ammonia leads to the formation of rhombohedral Ba3M2(O,N)8 and the corresponding binary metal nitrides Mo3N2 and W4.6N4; similar behavior was observed for CaMO4, which converted upon ammonolysis into individual oxides and nitrides. Thus, BaMO4 and CaMO4 were shown to not provide access to perovskite oxynitrides. The influence of the starting scheelite oxide precursor, the structure distortion and the degree of covalency of the B-site-N bond are discussed within the context of the formability of perovskite oxynitrides.

Monodisperse magnetic poly(glycidyl methacrylate) microspheres for isolation of autoantibodies with affinity for the 46 kDa form of unconventional Myo1C present in autoimmune patients.

PubMed

Zasońska, Beata A; Hlídková, Helena; Petrovský, Eduard; Myronovskij, Severyn; Nehrych, Tetyana; Negrych, Nazar; Shorobura, Mariya; Antonyuk, Volodymyr; Stoika, Rostyslav; Kit, Yuriy; Horák, Daniel

2018-04-23

Monodisperse nonmagnetic macroporous poly(glycidyl methacrylate) (PGMA) microspheres were synthesized by multistep swelling polymerization of glycidyl methacrylate, ethylene dimethacrylate and 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA). This was followed (a) by ammonolysis to modify the microspheres with amino groups, and (b) by incorporation of iron oxide (γ-Fe 2 O 3 ) into the pores to render the particles magnetic. The resulting porous and magnetic microspheres were characterized by scanning and transmission electron microscopy (SEM and TEM), atomic absorption and Fourier transform infrared spectroscopy (AAS and FTIR), elemental analysis, vibrating magnetometry, mercury porosimetry and Brunauer-Emmett-Teller adsorption/desorption isotherms. The microspheres are meso- and macroporous, typically 5 μm in diameter, contain 0.9 mM · g -1 of amino groups and 14 wt.% of iron according to elemental analysis and AAS, respectively. The particles were conjugated to p46/Myo1C protein, a potential biomarker of autoimmune diseases, to isolate specific autoantibodies in the blood of patients suffering from multiple sclerosis (MS). The p46/Myo1C loaded microspheres are shown to enable the preconcentration of minute quantities of specific immunoglobulins prior to their quantification via SDS-PAGE. The immunoglobulin M (IgM) with affinity to Myo1C was detected in MS patients. Graphical abstract Monodisperse magnetic poly(glycidyl methacrylate) microspheres were synthesized, conjugated with 46 kDa form of unconventional Myo1C protein (p46/Myo1C) via carbodiimide (DIC) chemistry, and specific autoantibodies isolated from blood of multiple sclerosis (MS) patients; immunoglobulin M (IgM) level increased in MS patients.

Synthesis and Characterization of LaTiO2N

NASA Astrophysics Data System (ADS)

Rugen, Evan E.

Photocatalysts offer an excellent opportunity to shift the global energy landscape from a fossil fuel-dependent paradigm to sustainable and carbon-neutral solar fuels. Oxynitride materials such as LaTiO2N are potential photocatalysts for the water splitting reaction due to their high oxidative stability and their narrow band gaps, which are suitable for visible light absorption. However, facile synthetic routes to metal oxynitrides with controlled morphologies are rare, and the local structures of these materials are under-characterized. Ultrasonic spray synthesis (USS) offers a facile method toward complex metal oxides which can potentially be converted to oxynitrides with preservation of the microsphere structures that typify the products from such aerosol routes. Here, La-Ti-O microspheres were facilely produced by USS and converted by ammonolysis to LaTiO2N microspheres with porous shells and hollow interiors. This particle architecture is accounted for by coupling suitable combustion chemistry with the aerosol technique, producing precursor particles where the La3+ and Ti4+ are well-mixed at small length scales; this feature enables preservation of the microsphere morphology during nitridation despite the crystallographic changes that occur. The LaTiO2N microspheres are comparable oxygen evolving photocatalysts to samples produced by conventional solid state methods. Pair distribution function (PDF) analysis is a local probe designed to examine the structure of disordered crystalline materials, and is an ideal technique for characterizing the ordering of anions in oxynitrides. Preliminary studies using PDF analysis to determine the presence of anion ordering and local structure in LaTiO2N produced by solid state methods are presented here. Future experiments are proposed that will grant detailed insight into the factors driving the degree of anion ordering in these types of materials. These results demonstrate the utility of USS as a facile, potentially scalable route to complex photocatalytic materials and their precursors, and the feasibility of PDF analysis for the determination of local structures in complex oxynitrides.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takahashi, Jumpei; Oka, Daichi; Kanagawa Academy of Science and Technology

Synthesis of mid- to late-transition metal oxynitrides is generally difficult by conventional thermal ammonolysis because of thermal instability. In this letter, we synthesized epitaxial thin films of AX-type phase-pure cobalt oxynitrides (CoO{sub x}N{sub y}) by using nitrogen-plasma-assisted pulsed laser deposition and investigated their structural, electrical, and magnetic properties. The CoO{sub x}N{sub y} thin films with 0 ≤ y/(x + y) ≤ 0.63 grown on MgO (100) substrates showed a structural phase transition from rock salt (RS) to zinc blend at the nitrogen content y/(x + y) ∼ 0.5. As the nitrogen content increased, the room-temperature electrical resistivity of the CoO{sub x}N{sub y} thin films monotonically decreased from the order ofmore » 10{sup 5} Ω cm to 10{sup −4} Ω cm. Furthermore, we observed an insulator-to-metal transition at y/(x + y) ∼ 0.34 in the RS-CoO{sub x}N{sub y} phase, which has not yet been reported in Co{sup 2+}/Co{sup 3+} mixed-valence cobalt oxides with octahedral coordination. The low resistivity in the RS-CoO{sub x}N{sub y} phase, on the 10{sup −3} Ω cm order, may have originated from the intermediate spin state of Co{sup 3+} stabilized by the lowered crystal field symmetry of the CoO{sub 6−n}N{sub n} octahedra (n = 1, 2,…5). Magnetization measurements suggested that a magnetic phase transition occurred in the RS-CoO{sub x}N{sub y} films during the insulator-to-metal transition. These results demonstrate that low-temperature epitaxial growth is a promising approach for exploring novel electronic functionalities in oxynitrides.« less

Designer synthetic media for studying microbial-catalyzed biofuel production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Xiaoyu; da Costa Sousa, Leonardo; Jin, Mingjie

Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX™ pretreated corn stover hydrolysate (ACH). Themore » SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.« less

Designer synthetic media for studying microbial-catalyzed biofuel production

DOE PAGES

Tang, Xiaoyu; da Costa Sousa, Leonardo; Jin, Mingjie; ...

2015-01-01

Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX™ pretreated corn stover hydrolysate (ACH). Themore » SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.« less

Investigations of inorganic and hybrid inorganic-organic nanostructures

NASA Astrophysics Data System (ADS)

Kam, Kinson Chihang

This thesis focuses on the exploratory synthesis and characterization of inorganic and hybrid inorganic-organic nanomaterials. In particular, nanostructures of semiconducting nitrides and oxides, and hybrid systems of nanowire-polymer composites and framework materials, are investigated. These materials are characterized by a variety of techniques for structure, composition, morphology, surface area, optical properties, and electrical properties. In the study of inorganic nanomaterials, gallium nitride (GaN), indium oxide (In2O3), and vanadium dioxide (VO2) nanostructures were synthesized using different strategies and their physical properties were examined. GaN nanostructures were obtained from various synthetic routes. Solid-state ammonolysis of metastable gamma-Ga2O 3 nanoparticles was found to be particularly successful; they achieved high surface areas and photoluminescent study showed a blue shift in emission as a result of surface and size defects. Similarly, In2O3 nanostructures were obtained by carbon-assisted solid-state syntheses. The sub-oxidic species, which are generated via a self-catalyzed vapor-liquid-solid mechanism, resulted in 1D nanostructures including nanowires, nanotrees, and nanobouquets upon oxidation. On the other hand, hydrothermal methods were used to obtain VO2 nanorods. After post-thermal treatment, infrared spectroscopy demonstrated that these nanorods exhibit a thermochromic transition with temperature that is higher by ˜10°C compared to the parent material. The thermochromic behavior indicated a semiconductor-to-metal transition associated with a structural transformation from monoclinic to rutile. The hybrid systems, on the other hand, enabled their properties to be tunable. In nanowire-polymer composites, zinc oxide (ZnO) and silver (Ag) nanowires were synthesized and incorporated into polyaniline (PANI) and polypyrrole (PPy) via in-situ and ex-situ polymerization method. The electrical properties of these composites are significantly influenced by the nanowire-polymer ratios and chemical functionalization of the respective nanowires, up to an order of magnitude. In hybrid framework materials, nine novel phases of magnesium tartrate coordination polymers were synthesized by exploiting different analogs of tartaric acid, resulting in chiral and achiral frameworks. These phases exhibited a diverse range of structures as a result of connectivity, density, composition differences as a function of temperature. The chirality of some of these frameworks was also verified using circular dichroism.

Ammonia pretreatment of corn stover enables facile lignin extraction

DOE PAGES

Mittal, Ashutosh; Katahira, Rui; Donohoe, Bryon S.; ...

2017-02-09

Thermochemical pretreatment of lignocellulose is often employed to render polysaccharides more digestible by carbohydrate-active enzymes to maximize sugar yields. The fate of lignin during pretreatment, however, is highly dependent on the chemistry employed and must be considered in cases where lignin valorization is targeted alongside sugar conversion—an important feature of future biorefinery development. Here, a two-step process is demonstrated in which anhydrous ammonia (AA) pretreatment is followed by mild NaOH extraction on corn stover to solubilize and fractionate lignin. As known, AA pretreatment simultaneously alters the structure of cellulose with enhanced digestibility while redistributing lignin. The AA-pretreated residue is thenmore » extracted with dilute NaOH at mild conditions to maximize lignin separation, resulting in a digestible carbohydrate-rich solid fraction and a solubilized lignin stream. Lignin removal of more than 65% with over 84% carbohydrate retention is achieved after mild NaOH extraction of AA-pretreated corn stover with 0.1 M NaOH at 25 °C. Two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy of the AA-pretreated residue shows that ammonolysis of ester bonds occurs to partially liberate hydroxycinnamic acids, and the AA-pretreated/NaOH-extracted residue exhibits a global reduction of all lignin moieties caused by reduced lignin content. A significant reduction (~70%) in the weight-average molecular weight ( M w) of extracted lignin is also achieved. Imaging of AA-pretreated/NaOH extracted residues show extensive delamination and disappearance of coalesced lignin globules from within the secondary cell walls. Glycome profiling analyses demonstrates ultrastructural level cell wall modifications induced by AA pretreatment and NaOH extraction, resulting in enhanced extractability of hemicellulosic glycans, indicating enhanced polysaccharide accessibility. The glucose and xylose yields from enzymatic hydrolysis of AA-pretreated/NaOH-extracted corn stover were higher by ~80% and ~60%, respectively, compared to untreated corn stover at 1% solids loadings. For digestions at 20% solids, a benefit of NaOH extraction is realized in achieving ~150 g/L of total monomeric sugars (glucose, xylose, and arabinose) in the enzymatic hydrolysates from AA-pretreated/NaOH-extracted corn stover. Altogether, this process enables facile lignin extraction in tandem with a leading thermochemical pretreatment approach, demonstrating excellent retention of highly digestible polysaccharides in the solid phase and a highly depolymerized, soluble lignin-rich stream.« less

Ammonia pretreatment of corn stover enables facile lignin extraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Ashutosh; Katahira, Rui; Donohoe, Bryon S.

Thermochemical pretreatment of lignocellulose is often employed to render polysaccharides more digestible by carbohydrate-active enzymes to maximize sugar yields. The fate of lignin during pretreatment, however, is highly dependent on the chemistry employed and must be considered in cases where lignin valorization is targeted alongside sugar conversion—an important feature of future biorefinery development. Here, a two-step process is demonstrated in which anhydrous ammonia (AA) pretreatment is followed by mild NaOH extraction on corn stover to solubilize and fractionate lignin. As known, AA pretreatment simultaneously alters the structure of cellulose with enhanced digestibility while redistributing lignin. The AA-pretreated residue is thenmore » extracted with dilute NaOH at mild conditions to maximize lignin separation, resulting in a digestible carbohydrate-rich solid fraction and a solubilized lignin stream. Lignin removal of more than 65% with over 84% carbohydrate retention is achieved after mild NaOH extraction of AA-pretreated corn stover with 0.1 M NaOH at 25 °C. Two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy of the AA-pretreated residue shows that ammonolysis of ester bonds occurs to partially liberate hydroxycinnamic acids, and the AA-pretreated/NaOH-extracted residue exhibits a global reduction of all lignin moieties caused by reduced lignin content. A significant reduction (~70%) in the weight-average molecular weight ( M w) of extracted lignin is also achieved. Imaging of AA-pretreated/NaOH extracted residues show extensive delamination and disappearance of coalesced lignin globules from within the secondary cell walls. Glycome profiling analyses demonstrates ultrastructural level cell wall modifications induced by AA pretreatment and NaOH extraction, resulting in enhanced extractability of hemicellulosic glycans, indicating enhanced polysaccharide accessibility. The glucose and xylose yields from enzymatic hydrolysis of AA-pretreated/NaOH-extracted corn stover were higher by ~80% and ~60%, respectively, compared to untreated corn stover at 1% solids loadings. For digestions at 20% solids, a benefit of NaOH extraction is realized in achieving ~150 g/L of total monomeric sugars (glucose, xylose, and arabinose) in the enzymatic hydrolysates from AA-pretreated/NaOH-extracted corn stover. Altogether, this process enables facile lignin extraction in tandem with a leading thermochemical pretreatment approach, demonstrating excellent retention of highly digestible polysaccharides in the solid phase and a highly depolymerized, soluble lignin-rich stream.« less

Multifaceted metabolomics approaches for characterization of lignocellulosic biomass degradation products formed during ammonia fiber expansion pretreatment

NASA Astrophysics Data System (ADS)

Vismeh, Ramin

Lignocellulosic biomass represents a rather unused resource for production of biofuels, and it offers an alternative to food sources including corn starch. However, structural and compositional impediments limit the digestibility of sugar polymers in biomass cell walls. Thermochemical pretreatments improve accessibility of cellulose and hemicellulose to hydrolytic enzymes. However, most pretreatment methods generate compounds that either inhibit enzymatic hydrolysis or exhibit toxicity to fermentive microorganisms. Characterization and quantification of these products are essential for understanding chemistry of the pretreatment and optimizing the process efficiency to achieve higher ethanol yields. Identification of oligosaccharides released during pretreatment is also critical for choosing hydrolases necessary for cost-effective hydrolysis of cellulose and hemicellulose to fermentable monomeric sugars. Two chapters in this dissertation describe new mass spectrometry-based strategies for characterization and quantification of products that are formed during ammonia fiber expansion (AFEX) pretreatment of corn stover. Comparison of Liquid Chromatography Mass Spectrometry (LC/MS) profiles of AFEX-treated corn stover (AFEXTCS) and untreated corn stover (UTCS) extract shows that ammonolysis of lignin carbohydrate ester linkages generates a suite of nitrogenous compounds that are present only in the AFEXTCS extract and represent a loss of ammonia during processing. Several of these products including acetamide, feruloyl, coumaroyl and diferuloyl amides were characterized and quantified in the AFEXTCS extracts. The total amount of characterized and uncharacterized phenolic amides measured 17.4 mg/g AFEXTCS. Maillard reaction products including pyrazines and imidazoles were also identified and measured in the AFEXTCS extract totaling almost 1 mg/g AFEXTCS. The total of quantified nitrogenous products that are formed during AFEX was 43.4 mg/g AFEXTCS which was equivalent to 45-50 % of ammonia that is lost during the pretreatment. Methodology for identification, detection and quantification of various diferulate cross-linkers in forms of Di-Acids (Di-Ac), Acid-Amide (Ac-Am), and Di-Amides (Di-Am) in AFEX and NaOH treated corn stover using ultrahigh performance liquid chromatography/tandem mass spectrometry (LC/MS/MS) is presented. Characterization of isomeric diferulates was based on the distinguishing fragments formed upon collision induced dissociation (CID) of [M+H]+ ions of each diferulate isomer. LC separations combined with quasi-simultaneous acquisition of mass spectra at multiple collision energies provide fast spectrum acquisition using a time-of-flight (TOF) mass analyzer. This approach, called mux-CID, generates molecular and fragment ion mass information at different collision energies for molecular and adduct ions of oligosaccharides in a single analysis. Non-selective CID facilitated characterization of glucans and arabinoxylans in the AFEXTCS extracts. A LC/MS gradient based on multiplexed-CID detection was developed and applied to profile oligosaccharides in AFEXTCS extract. This method detected glucans with degree of polymerization (DP) from 2 to 22 after solid phase extraction (SPE) enrichment using porous graphitized carbon (PGC), which proved essential for recoveries of specific oligosaccharides. Arabinoxylans were also detected and partially characterized using this strategy after hydrolysis using xylanase. A relative quantification based on peak areas showed removal of almost 85% of the acetate esters of arabinoxylans after AFEX.

Theme-Based Bidisciplinary Chemistry Laboratory Modules

NASA Astrophysics Data System (ADS)

Leber, Phyllis A.; Szczerbicki, Sandra K.

1996-12-01

A thematic approach to each of the two introductory chemistry laboratory sequences, general and organic chemistry, not only provides an element of cohesion but also stresses the role that chemistry plays as the "central science" and emphasizes the intimate link between chemistry and other science disciplines. Thus, in general chemistry the rubric "Environmental Chemistry" affords connections to the geosciences, whereas experiments on the topic of "Plant Assays" bridge organic chemistry and biology. By establishing links with other science departments, the theme-based laboratory experiments will satisfy the following multidisciplinary criteria: (i) to demonstrate the general applicability of core methodologies to the sciences, (ii) to help students relate concepts to a broader multidisciplinary context, (iii) to foster an attitude of both independence and cooperation that can transcend the teaching laboratory to the research arena, and (iv) to promote greater cooperation and interaction between the science departments. Fundamentally, this approach has the potential to impact the chemistry curriculum significantly by including student decision-making in the experimental process. Furthermore, the incorporation of GC-MS, a powerful tool for separation and identification as well as a state-of-the-art analytical technique, in the modules will enhance the introductory general and organic chemistry laboratory sequences by making them more instrument-intensive and by providing a reliable and reproducible means of obtaining quantitative analyses. Each multifaceted module has been designed to meet the following criteria: (i) a synthetic protocol including full spectral characterization of products, (ii) quantitative and statistical analyses of data, and (iii) construction of a database of results. The database will provide several concrete functions. It will foster the idea that science is a continuous incremental process building on the results of earlier experimentalists, it will reinforce an understanding of the scientific method by allowing students to propose testable hypotheses based on previous work, and it will generate a large body of quantitative data that can be used to illustrate the fundamentals of data analysis, including statistical measures of uncertainty. We have already developed several "Environmental Chemistry" modules for general chemistry, including monitoring for orthophosphate and nitrate concentrations in water using colorimetric analyses and assaying for gasoline contamination in water and soil samples using GC-MS. Another module dealing with herbicide residues in soil is still being explored. However, we purposefully choose here to emphasize the two modules that are under development for implementation in the organic chemistry laboratory sequence. The first "Plant Assay" project focuses on fatty acid methyl esters (FAMEs) and involves three discrete phases: (i) synthesis and characterization of FAME standards, (ii) isolation of the fatty acids (as FAMEs) from a variety of different plant leaves that will be collected by BIO 110 students on field trips, and (iii) qualitative and quantitative analysis of the plant leaf extract for whole-leaf lipid composition. Acid-catalyzed Fischer esterification of carboxylic acids in methanol is a standard methodology for the preparation of methyl esters. A textbook procedure (1) for the synthesis of ethyl laurate has been employed, with good success, to prepare eight FAMEs in yields of ca. 70%. Conversion of leaf phospholipids to FAMEs proceeds readily via a transesterification reaction. Treatment of the whole leaf in a methanolic HCl solution for an hour at 80 °C (2) is sufficient after extraction in hexane to provide a suitable sample for GC-MS analysis. Preliminary results obtained with an HP GCD system indicate that GC-MS will afford highly reliable quantitative data on FAME lipid composition. Possible extensions of the project include using boron trifluoride in methanol to effect transesterification (3) and examining the effect of variations in leaf type and season on lipid composition. A second "Plant Assay" study involves preparing and characterizing analogs of naphthalene-1-acetamide, which is the active growth-promoting ingredient in commercial preparations such as Transplantone® and Rootone®. There are two direct methods for synthesizing the amide from the native plant growth regulator ("auxin") or carboxylic acid: acid-catalyzed hydrolysis of the nitrile or ammonolysis of the acid chloride derivative, prepared in situ from the acid by treatment with thionyl chloride (4). In the spring of 1996, organic chemistry students synthesized the amide derivatives of a number of auxins via the acid chloride intermediate, which is more efficiently prepared using oxalyl chloride (40-60% overall yield) instead of thionyl chloride (20-40% overall yield), or via nitrile hydrolysis (72-99% yield). Plant bioassays, based on measurement of pea stem segment elongation (5) have only been performed on the acetamide derivatives of three auxins, indole-3-acetic acid (IAA), naphthalene-1-acetic acid (1-NAA), and naphthalene-2-acetic acid (2-NAA). In comparison with the control, indole-3-acetamide and naphthalene-1-acetamide promoted growth by 50% and 90%, respectively. The acetamide of 2-NAA impeded growth by 30% relative to the control, an observation consistent with the known antiauxin activity of 2-NAA (6). Acquisition of the necessary imaging system for the teaching laboratory will enable students to extend these quantitative studies to other auxin conjugates. Acknowledgment We are grateful to the NSF for financial support through the Division of Undergraduate Education (DUE-9455693 and DUE-9550890). Literature Cited 1. Mayo, D. W.; Pike, R. M.; Trumper, P. K. Microscale Organic Laboratory, 3rd ed; John Wiley & Sons: New York, 1994; pp 202-203. 2. Browse, J.; McCourt, P. J.; Somerville, C. R. Anal. Biochem. 1986, 152, 141. 3. Rodig, O. R.; Bell, C. E., Jr.; Clark, A. K. Organic Chemistry Laboratory; Saunders: Philadelphia, 1990; p 455. 4. Reference 3, pp 361-365. 5. Ballal, S.; Ellias, R.; Fluck, R.; Jameton, R.; Leber, P.; Lirio, R.; Salama, D. Plant Physiol. Biochem. 1993, 31, 249-255. 6. Venis, M. A.; Napier, R. M. Plant Growth Regulation 1991, 10, 329-340.