Spontaneous emergence of overgrown molar teeth in a colony of Prairie voles (Microtus ochrogaster)

PubMed Central

Jheon, Andrew H; Prochazkova, Michaela; Sherman, Michael; Manoli, Devanand S; Shah, Nirao M; Carbone, Lawrence; Klein, Ophir

2015-01-01

Continuously growing incisors are common to all rodents, which include the Microtus genus of voles. However, unlike many rodents, voles also possess continuously growing molars. Here, we report spontaneous molar defects in a population of Prairie voles (Microtus ochrogaster). We identified bilateral protuberances on the ventral surface of the mandible in several voles in our colony. In some cases, the protuberances broke through the cortical bone. The mandibular molars became exposed and infected, and the maxillary molars entered the cranial vault. Visualisation upon soft tissue removal and microcomputed tomography (microCT) analyses confirmed that the protuberances were caused by the overgrowth of the apical ends of the molar teeth. We speculate that the unrestricted growth of the molars was due to the misregulation of the molar dental stem cell niche. Further study of this molar phenotype may yield additional insight into stem cell regulation and the evolution and development of continuously growing teeth. PMID:25634121

Effect of Sodium Hydroxide Molarity on Physical, Mechanical and Thermal Conductivity of Metakaolin Geopolymers

NASA Astrophysics Data System (ADS)

Ain Jaya, Nur; Yun-Ming, Liew; Bakri Abdullah, Mohd Mustafa Al; Cheng-Yong, Heah; Hussin, Kamarudin

2018-03-01

In the present work, the effect of different sodium hydroxide (NaOH) molarity (6M, 8M, 10M, 12M and 14M) on the physical, mechanical and thermal conductivity of metakaolin geopolymers (MkGPs) was investigated. Geopolymers were prepared by activating the metakaolin with a mixture of NaOH with sodium silicate (Na2SiO3). The products obtained were characterized after 28 days of curing. The density, porosity, compressive strength and thermal conductivity (TC) were determined. In general, the NaOH molarity has a significant effect on the compressive strength of the MkGPs. The highest compressive strength was 14.6 MPa achieved with 10M of NaOH solution. The thermal conductivity of MkGPs measured in this work was low in the range between 0.71-0.97 W/mK. NaOH molarity had a significant effect on compressive strength but a marginal effect on thermal conductivity of MkGPs. The thermal conductivity was mainly affected by the bulk density and thus the total porosity. The results showed that the geopolymer can be considered to be used as the thermal insulating material.

Spectroscopic characterization of metal complexes of novel Schiff base. Synthesis, thermal and biological activity studies

NASA Astrophysics Data System (ADS)

Omar, M. M.; Mohamed, Gehad G.; Ibrahim, Amr A.

2009-07-01

Novel Schiff base (HL) ligand is prepared via condensation of 4-aminoantipyrine and 2-aminobenzoic acid. The ligand is characterized based on elemental analysis, mass, IR and 1H NMR spectra. Metal complexes are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance and thermal analyses (TGA, DrTGA and DTA). The molar conductance data reveal that all the metal chelates are non-electrolytes. IR spectra show that HL is coordinated to the metal ions in a uninegatively tridentate manner with NNO donor sites of the azomethine N, amino N and deprotonated caroxylic-O. From the magnetic and solid reflectance spectra, it is found that the geometrical structures of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, ΔH*, ΔS* and ΔG* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligands, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia Coli, Pseudomonas aeruginosa, Staphylococcus Pyogones and Fungi (Candida). The activity data show that the metal complexes to be more potent/antibacterial than the parent Shciff base ligand against one or more bacterial species.

Use of cone beam computed tomography to assess significant imaging findings related to mandibular third molar impaction.

PubMed

Matzen, Louise Hauge; Schropp, Lars; Spin-Neto, Rubens; Wenzel, Ann

2017-11-01

The aim of the study was to identify risk factors for pathoses related to mandibular third molars observed in cone beam computed tomography. Cone beam computed tomography volumes of 410 mandibular third molars were assessed by 3 observers, according to the angulation and position of the third molar in relation to the second molar. In addition, pathoses (marginal bone loss, resorption of the second molar, increased follicular space and lingual bone perforation) were assessed. Logistic regression analyses were used to test whether the angulation and position of the third molar were risk factors for pathoses. On average, 41% of second molars had resorption; mesioangulated (odds ratio [OR] 11-107; P < .001) and horizontally positioned (OR 13-120; P < .001) third molars located cervically at the second molar (OR 2-3; P < .027) significantly increased the risk. On average, 49% of second molars had marginal bone loss; mesioangulated (OR 16-85; P < .001) and horizontally positioned (OR 61-573; P < .001) third molars increased the risk. For the third molar, an increased follicular space was seen in 25% of cases; distal (OR 5-9; P < .001) and vertical positions (OR 5; P < .002) increased the risk. Lingual bone perforation was not related to a specific angulation. Specific angulations of the mandibular third molar are risk factors for marginal bone loss and resorption of the second molar. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of oral contraceptive use on the incidence of dry socket in females following impacted mandibular third molar extraction: a meta-analysis.

PubMed

Xu, J-L; Sun, L; Liu, C; Sun, Z-H; Min, X; Xia, R

2015-09-01

The aim of this comprehensive meta-analysis was to provide evidence-based data to test whether oral contraceptive (OC) use can promote the incidence of dry socket (DS) in females following impacted mandibular third molar extraction. PubMed, the Cochrane Library, and Elsevier Science Direct databases were searched. The pooled risk ratio (RR) with 95% confidence interval (CI) was calculated using fixed-effects or random-effects model analysis. Heterogeneity among studies was evaluated with the Cochran test and I(2) statistic. Study quality was assessed with the Newcastle-Ottawa scale. Of 70 articles identified in the search, 12 reporting 16 clinical controlled trials were included in this study. The incidence of DS was significantly greater in the OC groups than in the control groups (RR 1.80, 95% CI 1.33-2.43). Subgroup analyses showed that the unit assessed (tooth or patient), the region in which the study was conducted, and the intervention were not related to the incidence of DS in females taking OC after impacted mandibular third molar extraction. The sensitivity analysis showed no significant change when any one study was excluded. Publication bias was also not detected. This study suggests that OC use may promote the incidence of DS in females following impacted mandibular third molar extraction. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Measure Of Frequency Of Alveolar Osteitis Using Two Different Methods Of Osteotomy In Mandibular Third Molar Impactions: A Double-Blind Randomized Clinical Trial.

PubMed

Rashid, Hina; Hussain, Azmina; Sheikh, Abdul Hafeez; Azam, Kehkishan; Malik, Sofia; Amin, Muhammad

2018-01-01

Dento-alveolar surgical procedures involving third molar teeth are the most common surgical procedure in the field of surgery. The objective of this research was to analyse the impact of surgery on the incidence of alveolar osteitis after surgical removal of mandibular third molar and to compare two different bone cutting methods following impacted mandibular third molar surgery.. This double blinded randomized clinical trial was executed at the OPD of Department of Oral and Maxillofacial Surgery, Dow University of Health Sciences, Karachi. The study duration was four months. It was conducted on 60 patients needing unilateral mandibular third molar impaction removal. Patients were randomized to two groups (i.e., physio dispenser group and slow speed handpiece group) before surgery. The surgical procedure was performed under local anaesthesia by using standardized cross infection protocol. The frequency of alveolar osteitis was evaluated on thirdday postoperatively. Alveolar osteitis was diagnosed and confirmed by patient's history and clinical evaluation. Post-operative sequelae were observed and recorded objectively. Out of 60 patients', five patients experienced alveolar osteitis, and the incidence rate was 8.3%. A significant pvalue of 0.000 was calculated using binomial test for comparison of alveolar osteitis among both groups. Inter-examiner reliability was assessed by kappa and good (62%) agreement, which was found among the examiners, who diagnosed alveolar osteitis clinically. Post-operative sequelae were insignificant in slow speed hand piece group. It was observed that alveolar osteitis was reported in physio-dispenser group; similarly, post-operative complications were also more in this group as compared with slow speed-hand piece group. No surgical complications were observed in slow speed-hand piece group suggesting slow speed hand piece mode of osteotomy to be safer for third molar extraction as compared with physio-dispenser.

Efficiency of molar distalization associated with second and third molar eruption stage.

PubMed

Flores-Mir, Carlos; McGrath, Lisa; Heo, Giseon; Major, Paul W

2013-07-01

To evaluate the efficiency of molar distalization associated with the second and third molar eruption stage. A systematic computerized database search was conducted using several databases. Adaptations of the terms molar distalization and distalizing appliances were used. The reference lists of all the selected articles were also searched for any potential articles that might have been missed in the electronic search. The data provided in the selected publications were grouped and analyzed in terms of molar distalization with respect to various eruption stages of maxillary second and third molars. Out of the 13 initially identified articles only four fulfilled the final selection criteria. Three of the four studies showed no statistical significance in linear molar distalization based on the eruptive stage of the second and/or third molars, while one study found that the amount of distal movement of the first molars was significantly greater in the group with unerupted second molars. Only one study found that the amount of molar tipping that occurred as a result of distalization was related to the eruption stage of the maxillary molars. Similarly, three of the four studies found that molar distalization time was not significantly affected by eruption of the second or third molars. The effect of maxillary second and third molar eruption stage on molar distalization-both linear and angular distalization-appears to be minimal. This conclusion is only based on low-level of evidence clinical trials. The large variability in the outcomes should be considered clinically.

Effect of Structure on Transport Properties (Viscosity, Ionic Conductivity, and Self-Diffusion Coefficient) of Aprotic Heterocyclic Anion (AHA) Room Temperature Ionic Liquids. 2. Variation of Alkyl Chain Length in the Phosphonium Cation.

PubMed

Sun, Liyuan; Morales-Collazo, Oscar; Xia, Han; Brennecke, Joan F

2016-06-30

A series of room-temperature ionic liquids (ILs) composed of triethyl(alkyl)phosphonium cations paired with three different aprotic heterocyclic anions (AHAs) (alkyl = butyl ([P2224](+)) and octyl ([P2228](+))) were prepared to investigate the effect of cationic alkyl chain length on transport properties. The transport properties and density of these ILs were measured from 283.15 to 343.15 K at ambient pressure. The dependence of the transport properties (viscosity, ionic conductivity, diffusivity, and molar conductivity) on temperature can be described by the Vogel-Fulcher-Tamman (VFT) equation. The ratio of the molar conductivity obtained from the molar concentration and ionic conductivity measurements to that calculated from self-diffusion coefficients (measured by pulsed gradient spin-echo nuclear magnetic resonance spectroscopy) using the Nernst-Einstein equation was used to quantify the ionicity of these ILs. The molar conductivity ratio decreases with increasing number of carbon atoms in the alkyl chain, indicating that the reduced Coulombic interactions resulting from lower density are more than balanced by the increased van der Waals interactions between the alkyl chains. The results of this study may provide insight into the design of ILs with enhanced dynamics that may be suitable as electrolytes in lithium ion batteries and other electrochemical applications.

Spectroscopic and biological approach in the characterization of a novel 14-membered [N4] macrocyclic ligand and its Palladium(II), Platinum(II), Ruthenium(III) and Iridium(III) complexes

NASA Astrophysics Data System (ADS)

Rani, Soni; Kumar, Sumit; Chandra, Sulekh

2014-01-01

A novel, tetradentate nitrogen donor [N4] macrocyclic ligand, i.e. 3,5,14,16-tetramethyl-2,6,13,17-tetraazatricyclo[12,0,07-12] cosa-1(22),2,5,7,9,11,13,16,18,20-decaene(L), has been synthesized and characterized by elemental analyses, IR, Mass, and 1H NMR spectral studies. Complexes of Pd(II), Pt(II), Ru(III) and Ir(III) have been prepared and characterized by elemental analyses, molar conductance measurements, magnetic susceptibility measurements, IR, Mass, electronic spectral and thermal studies. On the basis of molar conductance the complexes may be formulated as [PdL]Cl2, [PtL]Cl2, [Ru(L)Cl2]Cl and [Ir(L)Cl2]Cl. The complexes are insoluble in most common solvents, including water, ethanol, carbon tetrachloride and acetonitrile, but soluble in DMF/DMSO. The value of magnetic moment indicates that all the complexes are diamagnetic except Ru(III) complex which shows magnetic moment corresponding to one unpaired electron. The magnetic moment of Ru(III) complex is 1.73 B.M. at room temperature. The antimicrobial activities of ligand and its complexes have been screened in vitro, as growth inhibiting agents. The antifungal and antibacterial screening were carried out using Food Poison and Disc Diffusion Method against plant pathogenic fungi and bacteria Alternaria porri, Fusarium oxysporum, Xanthomonas compestris and Pseudomonas aeruginosa respectively. The compounds were dissolved in DMSO to get the required solutions. The required medium used for these activities was PDA and nutrient agar.

External root resorption of the second molar associated with mesially and horizontally impacted mandibular third molar: evidence from cone beam computed tomography.

PubMed

Wang, Dongmiao; He, Xiaotong; Wang, Yanling; Li, Zhongwu; Zhu, Yumin; Sun, Chao; Ye, Jinhai; Jiang, Hongbing; Cheng, Jie

2017-05-01

The aim of the present study was to assess the incidence and risk factors of ERR in second molars with mesially and horizontally impacted mandibular third molars using cone beam computed tomography (CBCT) images from patients in a Chinese tertiary referral hospital. A total number of 216 patients with 362 mesially and horizontally impacted mandibular third molars who were treated at our institution from 2014 to 2015 was retrospectively included. The ERR in second molars was identified on CBCT multiplanar images. The associations between incidence of ERR and multiple clinical parameters were statistically analyzed by Chi-square test. Moreover, the risk factors for ERR in second molars were further assessed by multivariate regression analysis. The overall incidence of ERR in second molars was 20.17 % (73/362) as detected on CBCT images. The presence of ERR significantly associated with patients age and impaction depth of mandibular third molars. However, no significant relationship was found between ERR severity and impaction depth or ERR location. Multivariate regression analyses further revealed age over 35 years and impaction depth as important risk factors affecting the ERR incidence caused by mesial and horizontal impaction of mandibular third molar. ERR in second molar resulted from mesially and horizontally impacted mandibular third molar is not very rare and can be reliably identified via CBCT scan. Given the possibility of ERR associated with third molar impaction, the prophylactic removal of these impacted teeth could be considered especially for those patients with over 35 years and mesially and horizontally impacted teeth.

Bioactivity tests of calcium phosphates with variant molar ratios of main components.

PubMed

Pluta, Klaudia; Sobczak-Kupiec, Agnieszka; Półtorak, Olga; Malina, Dagmara; Tyliszczak, Bożena

2018-03-09

Calcium phosphates constitute attractive materials of biomedical applications. Among them particular attention is devoted to bioactive hydroxyapatite (HAp) and bioresorbable tricalcium phosphate (TCP) that possess ability to bind to living bones and can be used clinically as important bone substitutes. Notably, in vivo bone bioactivity can be predicted from apatite formation of bone immersed in SBF fluids. Thus, analyses of behavior of calcium phosphates immersed in various bio fluids are of great importance. Recently, stoichiometric HAp and TCP structures have been widely studied, whereas only limited number of publications have been devoted to analyses of nonstoichiometric calcium phosphates. Here, we report physicochemical analysis of natural and synthetic phosphates with variable Ca/P molar ratios. Subsequently attained structures were subjected to incubation in either artificial saliva or Ringer's fluids. Both pH and conductivity of such fluids were determined before and after incubation. Furthermore, the influence of the Ca/P values on such parameters was exemplified. Physicochemical analysis of received materials was performed by XRD and FT-IR characterization techniques. Their potential antibacterial activity and behavior in the presence of infectious microorganisms as Escherichia coli and Staphylococcus aureus was also evaluated. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2018. © 2018 Wiley Periodicals, Inc.

Metal complexes of diisopropylthiourea: synthesis, characterization and antibacterial studies.

PubMed

Ajibade, Peter A; Zulu, Nonkululeko H

2011-01-01

Co(II), Cu(II), Zn(II) and Fe(III) complexes of diisopropylthiourea have been synthesized and characterized by elemental analyses, molar conductivity, magnetic susceptibility, FTIR and electronic spectroscopy. The compounds are non-electrolytes in solution and spectroscopic data of the complexes are consistent with 4-coordinate geometry for the metal(II) complexes and six coordinate octahedral for Fe(III) complex. The complexes were screened for their antibacterial activities against six bacteria: Escherichia coli, Pseudomonas auriginosa, Klebsiella pneumoniae, Bacillus cereus, Staphylococcus aureus and Bacillus pumilus. The complexes showed varied antibacterial activities and their minimum inhibitory concentrations (MICs) were determined.

Prevalence of Third Molar Agenesis: Associated Dental Anomalies in Non-Syndromic 5923 Patients.

PubMed

Sujon, Mamun Khan; Alam, Mohammad Khursheed; Rahman, Shaifulizan Abdul

2016-01-01

The aim of this study was to investigate the prevalence of third molar agenesis and other associated dental anomalies in Bangladeshi population and to investigate the relationship of other dental anomalies with the third molar presence/agenesis. A retrospective study was performed using panoramic radiographs of 5923 patients, who ranged in age from 10 to 50 years. All radiographs were analyzed by Planmeca Romexis® 3.0 software (Planmeca Oy, Helsinki, Finland). Pearson chi-square and one way ANOVA (Post Hoc) test were conducted. The prevalence of third molar agenesis was 38.4%. The frequency of third molar agenesis was significantly higher in females than males (p <0.025). Third molar agenesis was significantly more prevalent in maxilla as compared to mandible (p <0.007). The prevalence of other dental anomalies was 6.5%, among them hypodontia was 3.1%. Prevalence of third molar agenesis varies in different geographic region. Among the other dental anomalies hypodontia was more prevalent.

Prevalence of Third Molar Agenesis: Associated Dental Anomalies in Non-Syndromic 5923 Patients

PubMed Central

Sujon, Mamun Khan; Alam, Mohammad Khursheed; Rahman, Shaifulizan Abdul

2016-01-01

The aim of this study was to investigate the prevalence of third molar agenesis and other associated dental anomalies in Bangladeshi population and to investigate the relationship of other dental anomalies with the third molar presence/agenesis. A retrospective study was performed using panoramic radiographs of 5923 patients, who ranged in age from 10 to 50 years. All radiographs were analyzed by Planmeca Romexis® 3.0 software (Planmeca Oy, Helsinki, Finland). Pearson chi-square and one way ANOVA (Post Hoc) test were conducted. The prevalence of third molar agenesis was 38.4%. The frequency of third molar agenesis was significantly higher in females than males (p <0.025). Third molar agenesis was significantly more prevalent in maxilla as compared to mandible (p <0.007). The prevalence of other dental anomalies was 6.5%, among them hypodontia was 3.1%. Prevalence of third molar agenesis varies in different geographic region. Among the other dental anomalies hypodontia was more prevalent. PMID:27580050

[Preliminary study on HA-coated titanium implants used as anchorage for protraction of dog molar teeth].

PubMed

Liang, X; Tang, S; Wang, H

1998-05-01

HA-coated titanium implants were placed surgically into dog mandible to protract the mandibular second molars with an orthodontic force of 150 g. During the force application period of 3 months, the movement of the molars was tested periodically and relevant reasons of movement were analysed. The results showed that the mesial moving distances of the second molar were respectively 1.04 mm, 1.68 mm and 1.76 mm at the first, second and third month, and the main reason of tooth mobility was ascribed to the implant anchorage. It can be concluded tiat HA-coated titanium implant can be used as anchorage for moving and fixing posterior teeth in the orthodontic treatment.

Influence of multiple clinical use on fatigue resistance of ProTaper rotary nickel-titanium instruments.

PubMed

Vieira, E P; França, E C; Martins, R C; Buono, V T L; Bahia, M G A

2008-02-01

To examine the influence of clinical use on the occurrence of deformation and fracture and on the fatigue resistance of ProTaper rotary instruments. Root canal treatments were performed on patients using the ProTaper rotary system. Ten sets of instruments were used by an experienced endodontist, each set in five molars. Another 10 sets of instruments were used by the same operator, each set in eight molars. In addition, 10 sets of instruments were used, each set in five molars, by undergraduate students with no clinical experience with the system. After clinical use, S1, S2, F1 and F2 instruments were analysed for damage by optical and scanning electron microscopy. The used sets, along with a control group of 12 sets of new instruments, were then tested in a bench device for fatigue resistance. The use of the ProTaper rotary instruments by an experienced endodontist allowed for the cleaning and shaping of the root canal system of up to eight molars without fracture. During the students work, six instruments fractured. Fatigue resistance decreased upon clinical use for all instruments analysed. Fatigue resistance of used instruments was reduced, but no significant change was observed amongst the instruments used for shaping the canals of five and eight molars. Operator experience affected the occurrence of fracture and plastic deformation during shaping.

Root canal morphology of primary molars: a micro-computed tomography study.

PubMed

Fumes, A C; Sousa-Neto, M D; Leoni, G B; Versiani, M A; da Silva, L A B; da Silva, R A B; Consolaro, A

2014-10-01

This was to investigate the root canal morphology of primary molar teeth using micro-computed tomography. Primary maxillary (n = 20) and mandibular (n = 20) molars were scanned at a resolution of 16.7 μm and analysed regarding the number, location, volume, area, structured model index (SMI), area, roundness, diameters, and length of canals, as well as the thickness of dentine in the apical third. Data were statistically compared by using paired-sample t test, independent sample t test, and one-way analysis of variance with significance level set as 5%. Overall, no statistical differences were found between the canals with respect to length, SMI, dentine thickness, area, roundness, and diameter (p > 0.05). A double canal system was observed in the mesial and mesio-buccal roots of the mandibular and maxillary molars, respectively. The thickness in the internal aspect of the roots was lower than in the external aspect. Cross-sectional evaluation of the roots in the apical third showed flat-shaped canals in the mandibular molars and ribbon- and oval-shaped canals in the maxillary molars. External and internal anatomy of the primary first molars closely resemble the primary second molars. The reported data may help clinicians to obtain a thorough understanding of the morphological variations of root canals in primary molars to overcome problems related to shaping and cleaning procedures, allowing appropriate management strategies for root canal treatment.

The effect of first and second premolar extractions on third molars: A retrospective longitudinal study.

PubMed

Miclotte, A; Grommen, B; Cadenas de Llano-Pérula, M; Verdonck, A; Jacobs, R; Willems, G

2017-06-01

To analyse the effect of first and second premolar extractions on eruption space for upper and lower third molars and on third molar position and angulation during orthodontic treatment. The sample consisted of 296 patients of which 218 patients were orthodontically treated without extraction and 78 patients with extraction of first or second premolars. The eruption space for third molars was measured on pre- and posttreatment lateral cephalograms, whereas the angulation, vertical position, the relation with the mandibular canal and the mineralization status of third molars were evaluated using pre- and posttreatment panoramic radiographs. All data were statistically analyzed. The increase in eruption space and the change in vertical position of upper and lower third molars significantly differed between patients treated with and without premolar extractions, whereas the change in angulation, relationship with the mandibular canal and mineralization status of the third molars did not significantly differ between patients treated with and without premolar extractions. The retromolar space and the position of third molars significantly change during orthodontic treatment in growing patients. Premolar extractions have a positive influence on the eruption space and vertical position of third molars, whereas they do not influence the angular changes of third molars. Due to the retrospective character of the study, these conclusions should be carefully considered. Further prospective research is necessary for better insights into this complex topic. This study stresses the importance of considering the possible effects of orthodontic treatment on third molars during treatment planning. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Prevalence of Distal Caries in Mandibular Second Molar Due to Impacted Third Molar

PubMed Central

Alshahrani, Fatima Saeed; Alabsi, Wejdan Saad; Alqahtani, Zainab Ali; Hameed, Mohammad Shahul; Mustafa, Abdel Bagi; Alam, Tanveer

2017-01-01

Introduction A tooth is said to be impacted if it does not reach the occlusal plane even after two-thirds root formation. The aetiology of impacted teeth is varied and multi-factorial. Significant problems associated with impacted teeth include trismus, infection, cervical caries of second molars. Aim This study was aimed to assess the prevalence of distal caries in second molar teeth due to impacted third molars and to compare with similar studies conducted elsewhere. Materials and Methods Study included assessment of patients reporting between 2009 to 2014 for dental care at College of Dentistry, King Khalid University, Abha, Kingdom of Saudi Arabia. This is a retrospective cross-sectional study which included a total of 6000 Orthopantomograms (OPGs). The data collected was decoded and entered into excel spread sheet. Descriptive analysis of the data was done and results were displayed as frequency table and graphs. Results A total of 979 patients had impacted third molars (16.31%). A total of 39% patient’s with impacted third molars had distal cervical caries in second molar. Mesioangular impaction was the most prominent type. This was closely followed by horizontal impaction causing distal caries in second molars. Age group between 21-28 years and male gender had the higher prevalence of distal caries in second molar teeth due to impacted third molars. Conclusion A total of 39% of the patients with impacted mandibular third molars had distal cervical caries in second molars. Mesioangular type, male gender, age group 21-28 years were the prominent factors associated with distal caries in second molar teeth due to impacted third molars. PMID:28511504

Morphometric analysis of developing crowns of maxillary primary second molars and permanent first molars in humans.

PubMed

Peretz, B; Nevis, N; Smith, P

1998-07-01

The purpose of this study was firstly to characterize the changes occurring in size and form of the mineralizing maxillary second primary molar and first permanent molar crowns, and secondly to determine if similar changes in size and form characterize enamel apposition in the crowns of these teeth. Twenty-five primary second molars and 20 maxillary permanent first molars at various stages of development, found in archaeological excavations in Israel, were examined for a number of measured variables using image analyser software. Teeth were divided into two groups according to their stage of development: stage I included all teeth at an early stage of development in which mesiobuccal-cusp height was less than 5 mm for the primary molar and 5.9 mm for the permanent molar; stage 2 included all teeth in later stages of development where mesiobuccal-cusp height was greater than these values. In the primary molar, a significant increase was found between the two stages in almost all variables. Significant correlations were also found between all intercusp distances and the external variables. Strong correlations between height of the mesiobuccal cusp and all external and internal variables were noted in stage 1, but fewer in stage 2. In the permanent tooth, no increase was observed in intercusp distances and very few correlations were found between and among the variables. The results suggest that a change in the shape of the maxillary primary second molar occurs during formation, with the lingual cusp tips moving lingually and distally, and the distobuccal cusp tips moving distally. No change occurs in the shape of the maxillary permanent first molar during crown formation. Growth of the maxillary primary second and permanent first molar crowns occurs in 'bursts' of development.

Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Biwan, E-mail: xubiwan@gmail.com; Ma, Hongyan, E-mail: mhy1103@gmail.com; Li, Zongjin

2015-02-15

This paper describes the influence of the magnesia-to-phosphate (M/P) molar ratios ranging from 4 to 12, on the properties and microstructures of magnesium potassium phosphate cement (MKPC) pastes with a large water-to-solid ratio (w/s) of 0.50. The setting behavior, compressive strength, tensile bonding strength and thermal conductivity of the MKPC pastes, were investigated. The results show that an increase in the M/P ratio can slow down the setting reaction, and clearly degrade the mechanical strengths, but clearly improve the thermal conductivity of MKPC pastes. Furthermore, micro-characterizations including X-ray diffraction, scanning electron microscopy and thermogravimetric analysis, on the MKPC pastes revealmore » that a lower M/P ratio can facilitate better crystallization of the resultant magnesium potassium phosphate hexahydrate (MKP) and a denser microstructure. Moreover, strong linear correlations are found between the mechanical strengths and the MKP-to-space ratio, and between thermal conductivity and the volume ratio of the unreacted magnesia to the MKP. - Highlights: • Increase of M/P molar ratio causes clear mechanical degradations on MKPC pastes. • Thermal conductivity of MKPC pastes is improved with increase of M/P molar ratio. • Lower M/P ratio leads to better MKP crystallization and denser microstructure. • Strengths of MKPC pastes are linearly correlated to the MKP-to-space ratios. • Thermal conductivity is affected by the volume ratio of unreacted magnesia to MKP.« less

Effect of Structure on Transport Properties (Viscosity, Ionic Conductivity, and Self-Diffusion Coefficient) of Aprotic Heterocyclic Anion (AHA) Room-Temperature Ionic Liquids. 1. Variation of Anionic Species.

PubMed

Sun, Liyuan; Morales-Collazo, Oscar; Xia, Han; Brennecke, Joan F

2015-12-03

A series of room temperature ionic liquids (RTILs) based on 1-ethyl-3-methylimidazolium ([emim](+)) with different aprotic heterocyclic anions (AHAs) were synthesized and characterized as potential electrolyte candidates for lithium ion batteries. The density and transport properties of these ILs were measured over the temperature range between 283.15 and 343.15 K at ambient pressure. The temperature dependence of the transport properties (viscosity, ionic conductivity, self-diffusion coefficient, and molar conductivity) is fit well by the Vogel-Fulcher-Tamman (VFT) equation. The best-fit VFT parameters, as well as linear fits to the density, are reported. The ionicity of these ILs was quantified by the ratio of the molar conductivity obtained from the ionic conductivity and molar concentration to that calculated from the self-diffusion coefficients using the Nernst-Einstein equation. The results of this study, which is based on ILs composed of both a planar cation and planar anions, show that many of the [emim][AHA] ILs exhibit very good conductivity for their viscosities and provide insight into the design of ILs with enhanced dynamics that may be suitable for electrolyte applications.

Factors associated with mandibular third molar eruption and impaction.

PubMed

Tsai, Hung-Huey

2005-01-01

A retrospective study, using panoramic radiographs, was conducted on 152 Taiwanese (72 males and 80 females) to investigate mandibular third molar eruption and impaction. The following measurements were made: inclinations and mesiodistal crown widths of the mandibular molars, vertical and horizontal spaces between the distal surface of the second molar and the anterior surface of the ramus, lengths and widths of the mandibular ramus and body, the ramus inclination, the mandibular plane angle, and the mandibular gonial angle. Differences between non-impaction and impaction groups were studied, and the variables were analyzed with multivariate discriminatory analysis. Significant differences between the two groups were found; variables describing spaces between the anterior of the ramus and the distal of the mandibular second molar and tooth size appeared to be the primary contributors to the differences observed.

Spectroscopic and biological approach in the characterization of a novel 14-membered [N4] macrocyclic ligand and its palladium(II), platinum(II), ruthenium(III) and iridium(III) complexes.

PubMed

Rani, Soni; Kumar, Sumit; Chandra, Sulekh

2014-01-24

A novel, tetradentate nitrogen donor [N4] macrocyclic ligand, i.e. 3,5,14,16-tetramethyl-2,6,13,17-tetraazatricyclo[12,0,0(7-12)] cosa-1(22),2,5,7,9,11,13,16,18,20-decaene(L), has been synthesized and characterized by elemental analyses, IR, Mass, and (1)H NMR spectral studies. Complexes of Pd(II), Pt(II), Ru(III) and Ir(III) have been prepared and characterized by elemental analyses, molar conductance measurements, magnetic susceptibility measurements, IR, Mass, electronic spectral and thermal studies. On the basis of molar conductance the complexes may be formulated as [PdL]Cl2, [PtL]Cl2, [Ru(L)Cl2]Cl and [Ir(L)Cl2]Cl. The complexes are insoluble in most common solvents, including water, ethanol, carbon tetrachloride and acetonitrile, but soluble in DMF/DMSO. The value of magnetic moment indicates that all the complexes are diamagnetic except Ru(III) complex which shows magnetic moment corresponding to one unpaired electron. The magnetic moment of Ru(III) complex is 1.73 B.M. at room temperature. The antimicrobial activities of ligand and its complexes have been screened in vitro, as growth inhibiting agents. The antifungal and antibacterial screening were carried out using Food Poison and Disc Diffusion Method against plant pathogenic fungi and bacteria Alternaria porri, Fusarium oxysporum, Xanthomonas compestris and Pseudomonas aeruginosa respectively. The compounds were dissolved in DMSO to get the required solutions. The required medium used for these activities was PDA and nutrient agar. Copyright © 2013 Elsevier B.V. All rights reserved.

Second molar impaction associated with lip bumper therapy

PubMed Central

Jacob, Helder Baldi; LeMert, Shawn; Alexander, Richard G.; Buschang, Peter H.

2014-01-01

INTRODUCTION: Although lip bumpers (LBs) provide significant clinical gain of mandibular arch perimeter in mixed-dentition patients, orthodontists are reluctant to use them due to the possibility of permanent second molar eruptive disturbances. OBJECTIVE: The present study was conducted to assess second molar impaction associated with the use of LBs, and to investigate how they can be solved. MATERIAL AND METHODS: Lateral and panoramic radiographs of 67 patients (34 females and 33 males) were assessed prior (T1) and post-LB treatment (T2). LB therapy lasted for approximately 1.8 ± 0.9 years. Concomitant rapid palatal expansion (RPE) was performed in the maxilla at LB treatment onset. Impaction of mandibular second molars was assessed by means of panoramic radiographs in relation to the position of first mandibular molars. Horizontal and vertical movements of first and second molars were assessed cephalometrically on lateral cephalometric radiographs based on mandibular superimpositions. RESULTS: Eight (11.9%) patients had impacted second molars at the end of LB therapy. Two patients required surgical correction, whereas five required spacers and one patient was self-corrected. Mandibular first molar tip and apex migrated forward 1.3 mm and 2.3 mm, respectively. Second molar tip showed no statistically significant horizontal movement. CONCLUSION: Although LB therapy increased the risk of second molar impaction, impactions were, in most instances, easily solved. PMID:25628086

Mandibular Third Molar Impaction: Review of Literature and a Proposal of a Classification

PubMed Central

Daugela, Povilas

2013-01-01

ABSTRACT Objectives The purpose of present article was to review impacted mandibular third molar aetiology, clinical anatomy, radiologic examination, surgical treatment and possible complications, as well as to create new mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results. Material and Methods Literature was selected through a search of PubMed, Embase and Cochrane electronic databases. The keywords used for search were mandibular third molar, impacted mandibular third molar, inferior alveolar nerve injury third molar, lingual nerve injury third molar. The search was restricted to English language articles, published from 1976 to April 2013. Additionally, a manual search in the major anatomy and oral surgery journals and books was performed. The publications there selected by including clinical and human anatomy studies. Results In total 75 literature sources were obtained and reviewed. Impacted mandibular third molar aetiology, clinical anatomy, radiographic examination, surgical extraction of and possible complications, classifications and risk factors were discussed. New mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results was proposed. Conclusions The classification proposed here based on anatomical and radiological impacted mandibular third molar features is promising to be a helpful tool for impacted tooth assessment as well as for planning for surgical operation. Further clinical studies should be conducted for new classification validation and reliability evaluation. PMID:24422029

Radiographic evaluation of third molar development in 6- to 24-year-olds

PubMed Central

Jung, Yun-Hoa

2014-01-01

Purpose This study investigated the developmental stages of third molars in relation to chronological age and compared third molar development according to location and gender. Materials and Methods A retrospective analysis of panoramic radiographs of 2490 patients aged between 6 and 24 years was conducted, and the developmental stages of the third molars were evaluated using the modified Demirjian's classification. The mean age, standard deviation, minimal and maximal age, and percentile distributions were recorded for each stage of development. A Mann-Whitney U test was performed to test the developmental differences in the third molars between the maxillary and mandibular arches and between genders. A linear regression analysis was used for assessing the correlation between the third molar development and chronological age. Results The developmental stages of the third molars were more advanced in the maxillary arch than the mandibular arch. Males reached the developmental stages earlier than females. The average age of the initial mineralization of the third molars was 8.57 years, and the average age at apex closure was 21.96 years. The mean age of crown completion was 14.52 and 15.04 years for the maxillary and the mandibular third molars, respectively. Conclusion The developmental stages of the third molars clearly showed a strong correlation with age. The third molars developed earlier in the upper arch than the lower arch; further, they developed earlier in males than in females. PMID:25279338

Evaluation of third molar development and its relation to chronological age: a panoramic radiographic study.

PubMed

Zandi, Mohammad; Shokri, Abbas; Malekzadeh, Hamid; Amini, Payam; Shafiey, Parastu

2015-06-01

Third molar development, in comparison to other teeth in the dentition, has the greatest variation in morphology, anatomical position, and time of development and eruption, and its reliability for chronological age estimation is controversial. The aim of the present study was to evaluate third molar development and its relation to chronological age using panoramic radiography. A total of 2536 digital panoramic radiographs of individuals aged between 5 and 26 years were selected. The developmental status of the third molars was assessed using eight-stage developmental scoring proposed by Demirjian et al., with one modification: a stage 0 was added. The collected data were entered into a checklist and subjected to statistical analyses. The mean ages of the first appearance of third molar bud, complete crown formation, and root apex closure were around 9, 14, and 22 years, respectively. In both jaws, third molar development occurred symmetrically, and sexual dimorphism was observed at some developmental stages. Finally, two formulas were presented to estimate age of the juveniles and adolescents based on their gender and developmental stages of the third molars, and validated on a second sample consisting of 523 individuals aged between 8 and 22. Assessment of third molar development was found to be a reliable method for age estimation of individuals between 11 and 22 years. Because of possible ethnic and geographic differences in third molar development, population specific researches were recommended.

Dental stigmata and enamel thickness in a probable case of congenital syphilis from XVI century Croatia.

PubMed

Lauc, Tomislav; Fornai, Cinzia; Premužić, Zrinka; Vodanović, Marin; Weber, Gerhard W; Mašić, Boris; Rajić Šikanjić, Petra

2015-10-01

To analyse the dental remains of an individual with signs of congenital syphilis by using macroscopic observation, CBCT and micro-CT images, and the analysis of the enamel thickness. Anthropological analysis of human skeletal remains from the 16th century archaeological site Park Grič in Zagreb, Croatia discovered a female, 17-20 years old at the time of death, with dental signs supportive of congenital syphilis: mulberry molars and canine defects, as well as non-specific hypoplastic changes on incisors. The focus of the analysis was on three aspects: gross morphology, hypoplastic defects of the molars, canines and incisors, as well as enamel thickness of the upper first and second molars. The observed morphology of the first molars corresponds to the typical aspect of mulberry molars, while that of the canines is characterised by hypomineralisation. Hypoplastic grooves were observed on the incisal edges of all incisors. The enamel of the first molars is underdeveloped while in the second molars a thick-enamelled condition is observed. Our observations for the dental and skeletal evidence are supportive to a diagnosis of congenital syphilis for this specimen from XVI century Croatia. The use of CT imaging helped documenting the diagnostic features and quantifying the effect of the dental stigmata on first molars. Copyright © 2015 Elsevier Ltd. All rights reserved.

A reassessment of the presumed Neandertal remains from San Bernardino Cave, Italy.

PubMed

Benazzi, Stefano; Peresani, Marco; Talamo, Sahra; Fu, Qiaomei; Mannino, Marcello A; Richards, Michael P; Hublin, Jean-Jacques

2014-01-01

In 1986-1987, three human remains were unearthed from macro-unit II of San Bernardino Cave (Berici Hills, Veneto, Italy), a deposit containing a late Mousterian lithic assemblage. The human remains (a distal phalanx, a lower right third molar and a lower right second deciduous incisor) do not show diagnostic morphological features that could be used to determine whether they were from Homo neanderthalensis or Homo sapiens. Despite being of small size, and thus more similar to recent H. sapiens, the specimens were attributed to Neandertals, primarily because they were found in Mousterian layers. We carried out a taxonomic reassessment of the lower right third molar (LRM3; San Bernardino 4) using digital morphometric analysis of the root, ancient DNA analysis, carbon and nitrogen isotope analyses, and direct accelerator mass spectrometry (AMS) radiocarbon dating of dentine collagen. Mitochondrial DNA analysis and root morphology show that the molar belongs to a modern human and not to a Neandertal. Carbon 14 ((14)C) dating of the molar attributes it to the end of the Middle Ages (1420-1480 cal AD, 2 sigma). Carbon and nitrogen isotope analyses suggest that the individual in question had a diet similar to that of Medieval Italians. These results show that the molar, as well as the other two human remains, belong to recent H. sapiens and were introduced in the Mousterian levels post-depositionally. Copyright © 2013 Elsevier Ltd. All rights reserved.

Restoration of a vertical alveolar bone defect by orthodontic relocation of a mesially impacted mandibular first molar.

PubMed

Kim, Sung-Jin; Kim, Jin-Wook; Choi, Tae-Hyun; Lee, Kee-Joon

2015-04-01

An impacted mandibular first molar tends to cause serious bone defects of the adjacent teeth. When choosing between the 2 typical treatment options-extraction or orthodontic relocation of the impacted tooth-the decision should be based on assessment of the prognosis. A 22-year-old man with severe mesioangulation and impaction of the mandibular first molar and a related vertical bone defect on the distal side of the second premolar was treated with extraction of the second molar and orthodontic relocation of the first molar with a retromolar miniscrew. Comprehensive orthodontic treatment involving premolar extraction was conducted. Strategic extraction of the molar and adequate orthodontic movement helped to restore the bone structure on the affected side. This case report suggests the effectiveness of restoration of bone defects by using viable periodontal tissues around the impacted tooth for the longevity of the periodontium. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Comparison of Maxillary Molar Distalization with an Implant-Supported Distal Jet and a Traditional Tooth-Supported Distal Jet Appliance

PubMed Central

Cozzani, Mauro; Pasini, Marco; Zallio, Francesco; Ritucci, Robert; Mutinelli, Sabrina; Mazzotta, Laura; Giuca, Maria Rita; Piras, Vincenzo

2014-01-01

Aim. To investigate and compare the efficiency of two appliances for molar distalization: the bone-anchored distal screw (DS) and the traditional tooth-supported distal jet (DJ) for molar distalization and anchorage loss. Methods. Tests (18 subjects) were treated with a DS and controls (18 subjects) were treated with a DJ. Lateral cephalograms were obtained before and at the end of molar distalization and were analysed. Shapiro Wilk test, unpaired t-test, and Wilcoxon rank-sum test were applied according to values distribution. The α level was fixed at 0.05. Results. Maxillary first molars were successfully distalized into a Class I relationship in all patients. The mean molar distalization and treatment time were similar in both groups. The DS group exhibited a spontaneous distalization (2.1 ± 0.9 mm) of the first premolar with control of anchorage loss, distal tipping, extrusion, and skeletal changes. Conclusions. The DS is an adequate compliance-free distalizing appliance that can be used safely for the correction of Class II malocclusions. In comparison to the traditional DJ, the DS enables not only a good rate of molar distalization, but also a spontaneous distalization of the first premolars. PMID:25018770

Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying

NASA Astrophysics Data System (ADS)

Zhou, Ting; Cheng, Xudong; Pan, Yuelei; Li, Congcong; Gong, Lunlun; Zhang, Heping

2018-04-01

In order to maintain the integrity, glass fiber (GF) reinforced silica aerogel composites were synthesized using methltrimethoxysilane (MTMS) and water glass co-precursor by freeze drying method. The composites were characterized by scanning electron microscopy, Brunauer-Emmett-Teller analysis, uniaxial compressive test, three-point bending test, thermal conductivity analysis, contact angle test, TG-DSC analysis. It was found that the molar ratio of MTMS/water glass could significantly affect the properties of composites. The bulk density and thermal conductivity first decreased and then increased with the increasing molar ratio. The composites showed remarkable mechanical strength and flexibility compared with pure silica aerogel. Moreover, when the molar ratio is 1.8, the composites showed high specific surface area (870.9 m2/g), high contact angle (150°), great thermal stability (560 °C) and low thermal conductivity (0.0248 W/m·K). These outstanding properties indicate that GF/aerogels have broad prospects in the field of thermal insulation.

Palladium(II) and zinc(II) complexes of neutral [N2O2] donor Schiff bases derived from furfuraldehyde: synthesis, characterization, fluorescence and corrosion inhibitors of ligands.

PubMed

Ali, Omyma A M

2014-11-11

Metal complexes of Schiff bases derived from furfuraldehyde and 4,5-dimethyl-1,2-phenylendiamine (L1) or 4,5-dichloro-1,2-phenylendiamine (L2) have been reported and characterized based on elemental analyses, IR, 1H NMR, UV-Vis, magnetic moment, molar conductance and thermal analysis. The complexes are found to have the formulae [PdL1-2]Cl2 and [ZnL1-2](AcO)2·H2O. The molar conductance data reveal that Pd(II) and Zn(II) chelates are ionic in nature and are of the type 2:1 electrolytes. The spectral data are consistent with a square planar and tetrahedral geometry around Pd(II) and Zn(II), respectively, in which the ligands act as tetradentate ligands. The thermal behavior of some chelates is studied and the activation thermodynamic parameters are calculated using Coats-Redfern method. The corrosion inhibition of stainless steel types 410 and 304 in 1 M HCl using the synthesized Schiff bases as inhibitors have been studied by weight loss method. The obtained data considered these ligands as efficient corrosion inhibitors. The ligands and their metal complexes exhibited considerable antibacterial activity against Staphylococcusaureus, and Escherichiacoli and antifungal activity against Candida albicans. Copyright © 2014 Elsevier B.V. All rights reserved.

Dental microwear in relation to changes in the direction of mastication during the evolution of Myodonta (Rodentia, Mammalia)

NASA Astrophysics Data System (ADS)

Charles, Cyril; Jaeger, Jean-Jacques; Michaux, Jacques; Viriot, Laurent

2007-01-01

Observations of dental microwear are used to analyse the correlation between changes in molar tooth crown morphology and the direction of masticatory movement during the evolution of Myodonta (Rodentia, Mammalia). The studied sample includes 36 specimens representing both superfamilies of Myodonta (Muroidea and Dipodoidea) spanning 16 dipodoid and 9 muroid species. Microscopic scratches on occlusal surfaces resulting from contact between opposite teeth during mastication are analysed. Using these features, we determine the direction of masticatory movements. Microwear patterns display diverse orientations among Dipodoidea: oblique in Sicistinae, Euchoreutinae and Zapodinae, propalinal in Dipodinae and intermediary in Allactaginae. Similarly, Muroidea exhibit the following orientations: oblique in Cricetinae and propalinal in Arvicolinae, Cricetomyinae, Gerbillinae and Murinae. These various chewing types illustrate different evolutionary grades within the superfamilies. Acquisition of the antero-posterior masticatory movement in Dipodoidea is related to flattening of the molar occlusal surface. However, in some muroid subfamilies, this direction of mastication is associated with low-crowned and cuspidate molars (Cricetomyinae, Murinae).

Radiographic signs of pathology determining removal of an impacted mandibular third molar assessed in a panoramic image or CBCT

PubMed Central

Schropp, Lars; Spin-Neto, Rubens; Wenzel, Ann

2017-01-01

Objectives: To (1) compare pathological findings related to the mandibular third molar in panoramic images (PAN) and CBCT; (2) estimate the frequency of removals if pathological findings were indicative; and (3) assess factors in PAN associated with resorption and marginal bone loss at the second molar as observed in CBCT. Methods: 379 mandibular third molars were examined with PAN and CBCT. Four observers registered resorption and marginal bone loss at the second molar and increased periodontal space at the third molar in both imaging modalities. Agreement between PAN and CBCT, frequency of removals based on pathological findings in either of the two modalities and interobserver reproducibility was calculated. Logistic regression analyses assessed factors in PAN, which could predict marginal bone loss and resorption observed in CBCT. Results: Agreement between PAN and CBCT: resorption 54–74%; marginal bone loss 66–85%; and increased periodontal space 92–97%. Removals based on CBCT and PAN: 58–71% and 36–65%. Interobserver percentage accordance and kappa values ranged from 57 to 98% and 0.10–0.91 for PAN and 61–97% and 0.22–0.78 for CBCT, respectively. Mesioangulated/horizontally positioned third molars were associated with marginal bone loss [odds ratio (OR) = 7.0–31.3; p < 0.001] and resorption (OR = 2.9–35.6; p < 0.001) in CBCT. Overprojection between the third and the second molars in PAN predicted resorption observed in CBCT (OR = 5.6–21.2; p < 0.001). Conclusions: Pathology associated with the third molar is more often observed in CBCT than in PAN. More third molars would be removed if pathological findings are based on CBCT. Mesioangulated/horizontally positioned third molars overprojecting the cervical/root part of the second molar in PAN are strongly associated with pathology observed in CBCT. PMID:27681861

Radiographic signs of pathology determining removal of an impacted mandibular third molar assessed in a panoramic image or CBCT.

PubMed

Matzen, Louise H; Schropp, Lars; Spin-Neto, Rubens; Wenzel, Ann

2017-01-01

To (1) compare pathological findings related to the mandibular third molar in panoramic images (PAN) and CBCT; (2) estimate the frequency of removals if pathological findings were indicative; and (3) assess factors in PAN associated with resorption and marginal bone loss at the second molar as observed in CBCT. 379 mandibular third molars were examined with PAN and CBCT. Four observers registered resorption and marginal bone loss at the second molar and increased periodontal space at the third molar in both imaging modalities. Agreement between PAN and CBCT, frequency of removals based on pathological findings in either of the two modalities and interobserver reproducibility was calculated. Logistic regression analyses assessed factors in PAN, which could predict marginal bone loss and resorption observed in CBCT. Agreement between PAN and CBCT: resorption 54-74%; marginal bone loss 66-85%; and increased periodontal space 92-97%. Removals based on CBCT and PAN: 58-71% and 36-65%. Interobserver percentage accordance and kappa values ranged from 57 to 98% and 0.10-0.91 for PAN and 61-97% and 0.22-0.78 for CBCT, respectively. Mesioangulated/horizontally positioned third molars were associated with marginal bone loss [odds ratio (OR) = 7.0-31.3; p < 0.001] and resorption (OR = 2.9-35.6; p < 0.001) in CBCT. Overprojection between the third and the second molars in PAN predicted resorption observed in CBCT (OR = 5.6-21.2; p < 0.001). Pathology associated with the third molar is more often observed in CBCT than in PAN. More third molars would be removed if pathological findings are based on CBCT. Mesioangulated/horizontally positioned third molars overprojecting the cervical/root part of the second molar in PAN are strongly associated with pathology observed in CBCT.

Opinions of American and Swedish orthodontists about the role of erupting third molars as a cause of dental crowding.

PubMed

Tüfekçi, E; Svensk, D; Kallunki, J; Huggare, J; Lindauer, S J; Laskin, D M

2009-11-01

To compare the opinions of Swedish orthodontists and American orthodontists regarding the association between third molar eruption and dental crowding. A survey was distributed to Swedish orthodontists (n = 230) asking their views on the force exerted by erupting third molars, its relationship to crowding, and their recommendations for prophylactic removal. Results were compared with those from a similar study conducted in the United States. Chi square analysis was used to determine differences in responses to questions between Swedish and American orthodontists. P < or = .05 was considered significant. Both Swedish and American orthodontists believed that lower third molars were more likely than upper third molars to cause force (65% and 58% for Swedish and American orthodontists, respectively) and crowding (42% and 40%, respectively). No statistically significant differences were seen between the answers of American and Swedish orthodontists regarding the role of upper and lower third molars in causing crowding. Although only 18% of Swedish orthodontists "generally" or "sometimes" recommended prophylactic removal of mandibular third molars, 36% of American orthodontists "generally" or "sometimes" recommended removal (P < .0001). Most orthodontists in the United States and Sweden do believe that erupting lower third molars exert an anterior force; however, they also believe that these teeth "rarely" or "never" cause crowding of the dentition. The reason that more American orthodontists recommend prophylactic removal of mandibular third molars remains unexplained.

Ectopic eruption of first permanent molars: presenting features and associations.

PubMed

Mooney, G C; Morgan, A G; Rodd, H D; North, S

2007-09-01

To investigate presenting features of ectopically erupting first permanent molars and associations with other dental anomalies. Prospective convenience study. 28 panoral radiographs were collected, over a 24-month period, of 7-11 year-old children with radiographic evidence of ectopic eruption of first permanent molars who presented to a Dental Teaching Hospital in the North of England. A further 20 radiographs were collected of matched patients with no evidence of ectopic molar eruption. All radiographs were analysed under standard conditions to record the distribution and type of ectopic eruption (if present). In addition, the presence of the following dental anomalies was noted: cleft lip and/or palate; supernumerary teeth; hypodontia, and infraocclusion of primary molars. Chi-squared analysis was performed to determine any significant differences in the frequency of these dental anomalies between ectopic molar and control groups. For patients with ectopic molar eruption, the majority demonstrated ectopic eruption of either one or two first permanent molars (32% and 57% of subjects respectively). There were a similar proportion of 'jumps' and 'holds'. 92% of these were maxillary teeth and there was equal left and right distribution. Interestingly, a positive record of ectopic eruption was only documented in the dental records of 35.7% of these subjects. Children with ectopic eruption were significantly more likely to have at least one additional dental anomaly than was the case for the control group (60.7% versus 25%). Notably, primary molar infraocclusion and cleft lip/palate were significantly more frequent in the ectopic group. This study, the first in a British population, has identified a significant association between ectopic eruption of first permanent molars and other dental anomalies. A multifactorial aetiology is thus supported and clinicians should be alert to the co-existence of ectopic eruption and other dental anomalies.

Synthesis, characterization, and antipathogenic studies of some transition metal complexes with N,O-chelating Schiff's base ligand incorporating azo and sulfonamide Moieties

NASA Astrophysics Data System (ADS)

Alaghaz, Abdel-Nasser M. A.; Bayoumi, Hoda A.; Ammar, Yousry A.; Aldhlmani, Sharah A.

2013-03-01

Chromium(III), Manganese(II), Cobalt(II), nickel(II), copper(II) and cadmium(II) complexes of 4-[4-hydroxy-3-(phenyliminomethyl)-phenylazo]benzenesulfonamide, were prepared and characterized on the basis of elemental analyses, spectral, magnetic, molar conductance and thermal analysis. Square planar, tetrahedral and octahedral geometries have been assigned to the prepared complexes. Dimeric complexes are obtained with 2:2 molar ratio except chromium(III) complex is monomeric which is obtained with 1:1 molar ratios. The IR spectra of the prepared complexes were suggested that the Schiff base ligand(HL) behaves as a bi-dentate ligand through the azomethine nitrogen atom and phenolic oxygen atom. The crystal field splitting, Racah repulsion and nepheloauxetic parameters and determined from the electronic spectra of the complexes. Thermal studies suggest a mechanism for degradation of HL and its metal complexes as function of temperature supporting the chelation modes. Also, the activation thermodynamic parameters, such as ΔE*, ΔH*, ΔS* and ΔG* for the different thermal decomposition steps of HL and its metal complexes were calculated. The pathogenic activities of the synthesized compounds were tested in vitro against the sensitive organisms Staphylococcus aureus (RCMB010027), Staphylococcus epidermidis (RCMB010024) as Gram positive bacteria, Klebsiella pneumonia (RCMB 010093), Shigella flexneri (RCMB 0100542), as Gram negative bacteria and Aspergillus fumigates (RCMB 02564), Aspergillus clavatus (RCMB 02593) and Candida albicans (RCMB05035) as fungus strain, and the results are discussed.

Evaluation of the muscle relaxant cyclobenzaprine after third-molar extraction.

PubMed

de Santana Santos, Thiago; Calazans, Anna Carla Maranhão; Martins-Filho, Paulo Ricardo Saquete; Silva, Luiz Carlos Ferreira da; de Oliveira E Silva, Emanuel Dias; Gomes, Ana Claudia Amorim

2011-10-01

Pain, swelling and trismus are undesirable effects of extraction of impacted mandibular third molars. The authors conducted a study to evaluate the effectiveness of the muscle relaxant cyclobenzaprine when used as a supplement to cryotherapeutic, antibiotic and steroidal anti-inflammatory treatment with the aim of reducing undesirable consequences after third-molar extraction. The authors conducted a prospective, randomized, double-masked, placebo-controlled clinical trial involving 50 participants aged 18 to 29 years randomly assigned to receive cyclobenzaprine or the placebo. The authors used a split-mouth design, so each participant acted as his or her own control. For each participant, the authors extracted one impacted mandibular third molar on each side of the mouth at different times. Participants received 10 milligrams of cyclobenzaprine or a placebo once per day the day before surgery, the day of surgery and the first day after surgery. The authors assessed the participants' postoperative pain by means of a visual analog scale at four, six, eight, 12, 24 and 48 hours. They measured the participants' swelling and maximal interincisor distance at 48 hours and seven days. The authors assessed both sides of each participant's mouth for differences in pain, swelling and trismus. They found no statistically significant differences between sides of the mouth regarding these three variables. The results of this trial indicate that the influence of cyclobenzaprine over pain, swelling and trismus does not justify prescribing additional medication for patients undergoing third-molar extraction. The muscle relaxant cyclobenzaprine was ineffective in reducing pain, swelling and trismus after third-molar extraction.

Synthesis, spectroscopic characterization, thermal analysis and electrical conductivity studies of Mg(II), Ca(II), Sr(II) and Ba(II) vitamin B2 complexes

NASA Astrophysics Data System (ADS)

Refat, Moamen S.; Moussa, Mohamed A. A.; Mohamed, Soha F.

2011-05-01

Riboflavin (RF) complexes of Mg(II), Ca(II), Sr(II) and Ba(II) were successfully synthesized. Structures of metal complexes obtained were confirmed and characterized by elemental analysis, molar conductance, and infrared spectra. DC electrical conductivity measurements indicated that the alkaline earth metal (II) complexes of RF ligand are non-electrolytes. Elemental analysis of chelates suggest that the metal(II) ligand ratio is 1:2 with structure formula as [M(RF) 2( X) 2]· nH 2O. Infrared assignments clearly show that RF ligand coordinated as a bidentate feature through azomethine nitrogen of pyrazine ring and C dbnd O of pyrimidine-2,4-dione. Thermal analyses of Mg(II), Ca(II), Sr(II) and Ba(II) complexes were investigated using (TG/DSC) under atmospheric nitrogen between 30 and 800 °C. The surface morphology of the complexes was studied by SEM. The electrical conductivities of RF and its metal complexes were also measured with DC electrical conductivity in the temperature range from room to 483 K.

Finite element method (FEM) analysis of the force systems produced by asymmetric inner headgear bows.

PubMed

Geramy, Allahyar; Kizilova, Natalya; Terekhov, Leonid

2011-11-01

Extra-oral traction appliances were introduced more than a century ago and continue to be used to produce orthopaedic and/or dental changes in the maxilla. While force systems produced by asymmetric outer bows have been studied extensively, the force systems produced by asymmetric inner bows have been overlooked. To analyse the forces acting on the maxillary first molars: when the size of one bayonet bend is increased; when the point of application of the distalising force on the inner bow is moved to one side; when one molar is displaced palatally. Four FEM models of cervical headgear attached to maxillary first molars were designed in SolidWorks 2010 and transferred to an ANSYS Workbench Ver. 12.1. Model 1, each molar was 23 mm from the midpalatal line and the inner bow was symmetrical; Model 2, the left molar was displaced 4 mm towards the midpalatal line and the inner bow was symmetrical; Model 3, the molars were equidistant (23 mm) from the midpalatal line, but the left molar was engaged by a 2 mm larger bayonet bend; Model 4, the molars were equidistant (23 mm) from the midpalatal line but the join between the inner and outer bows was displaced 2 mm towards the left molar. In all FEM models, a 2N force was applied to the inner bow at the join between inner and outer bows and the energy transmitted to the teeth and the von Mises stresses on the molar PDLs were assessed. There were marked differences in the strain energy on the teeth and the von Mises stresses on their PDLs. A 14 to 20 per cent increase in energy and force was produced on the tooth closer to the symmetric plane of the headgear. In addition, the increase in energy produced a 30 to 62 per cent increase in the von Mises stresses within the PDLs. Small asymmetries in molar position, the size of a bayonet bend and the point of application of a force on an inner bow resulted in asymmetrical forces on the molars. These forces were higher on the molar closer to the symmetric plane of the headgear.

C-shaped maxillary permanent first molar: a case report and literature review.

PubMed

Martins, Jorge N R; Quaresma, Sérgio; Quaresma, Maria Carlos; Frisbie-Teel, Jared

2013-12-01

The C-shaped configuration is rare in the upper first molar.The purpose of this article is to present 2 cases diagnosed during endodontic therapy and perform a literature review of this anatomy in the upper first molar. Endodontic therapy was performed by using a dental operating microscope and a cone-beam computed tomography analysis for better understanding of this anatomy. A literature search was conducted to identify and compare all the published cases of C-shaped upper first molar. Before the cases reported in this article, only 5 cases were available in the published literature. Three different types of C-shaped configurations in the upper first molar have been presented. The C-shaped maxillary first molar is a rare anatomic configuration. The use of the dental operating microscope may help in the endodontic therapy of these cases. Three types of C-shaped configurations have been reported; the fusion of the distobuccal root with the palatal root appears to be the most usual one. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Four osteotomy methods with piezosurgery to remove complicated mandibular third molars: a retrospective study.

PubMed

Ge, Jing; Yang, Chi; Zheng, Jia-Wei; He, Dong-Mei; Zheng, Ling-Yan; Hu, Ying-Kai

2014-11-01

Piezosurgery has been used widely in oral and maxillofacial surgery, but there has been no report systematically describing an osteotomy method with piezosurgery for complicated mandibular third molar removal. The aim of this study was to introduce 4 osteotomy methods using piezosurgery and evaluate their effects. A retrospective study was conducted of patients with a complicated impacted mandibular third molar requiring extraction. The predictor variable was the extraction technique. Four osteotomy methods using piezosurgery were tested according to different impaction types: method 1 involved complete bone removal; method 2 involved segmental bone removal; method 3 involved bone removal combined with tooth splitting; and method 4 involved block bone removal. Outcome variables were success rate, operative time, major complications (including nerve injury, mandible fracture, severe hematoma, or severe edema), and serious pyogenic infection. Data were analyzed using descriptive statistics. The study was composed of 55 patients with 74 complicated impacted mandibular third molars. All impacted mandibular third molars were removed successfully. The average surgical time was 15 minutes (range, 8 to 26 minutes). Thirty-eight molars (51.4%) were extracted by method 1, 18 molars (24.3%) by method 2, 12 molars (16.2%) by method 3, and 6 molars (8.1%) by method 4. Two cases (2.7%) developed postoperative infections and recovered within 1 week using drainage and antibiotic administration. The 4 osteotomy methods with piezosurgery provide effective ways of removing complicated impacted mandibular third molars. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Distal root curvatures in mandibular molars: analysis using digital panoramic X-rays.

PubMed

Fuentes, R; Farfán, C; Astete, N; Navarro, P; Arias, A

2018-01-01

The aim of this study was to describe the degree of curvature in distal roots in the first and second permanent mandibular molars in a Chilean patient sample. A cross-sectional descriptive study was conducted in which digital panoramic X-rays were analysed. Examinations of patients under 18 years, with signs of distortion or alteration in the contrast or the presence of pathologies that affected visualisation of the roots and pulp-chamber floor of the teeth to be analysed were excluded. Using the AutoCad software, an angle was drawn to represent the curve of the root in its different thirds, drawing lines inside the root canal from the pulp-chamber floor to the dental apex. Using the classic definition of dilaceration (root curvature > 90°), its prevalence was established. 412 teeth and roots were analysed, finding a dilaceration prevalence of 0.73% (n = 3). 84.72% of the roots presented some type of curvature. The middle third had the highest percentage of curvatures and the greatest average of angular curvature, whereas the cervical third was the straightest. No significant differences were found between the degree of curvature and the gender of the subjects, except for the apical third of tooth 3.6. The analysis of curvature by root third offers to the clinician a better perspective of the directional change of the roots and does not limit it to just the presence of curves in the apical third. The report of the angular degree of the curvatures, in addition to the prevalence of dilacerations, informs to the clinicians about the likelihood of finding difficulties when treating root canals. (Folia Morphol 2018; 77, 1: 131-137).

Synthesis, spectroscopic, coordination and biological activities of some organometallic complexes derived from thio-Schiff base ligands

NASA Astrophysics Data System (ADS)

Abou-Hussein, Azza A.; Linert, Wolfgang

2014-01-01

Two series of mono- and binuclear complexes cyclic or acyclic thio-ferocine Schiff base ligands, derived from the condensation of 2-aminobenzenthiol (L) with monoacetyl ferrocene in the molar ratio 1:1 or in the molar ratio 1:2 for diacetyl ferocine have been prepared. The condensation reactions yield the corresponding Schiff Base ligands, HLa-Maf and H2Lb-Daf. The chelation of the ligands to metal ions occurs through the sulfur of the thiol group as well as the nitrogen atoms of the azomethine group of the ligands. HLa-Maf acts as monobasic bidentate or dibasic tetradentate, while H2Lb-Daf behaves as twice negatively cargend tetradentate ligand. The structures of these ligands were elucidated by elemental analysis, infrared, ultraviolet-visible spectra, as well as 1H NMR spectra. Reactions of the Schiff bases ligands with ruthenium(III), oxovanadium(IV) and dioxouranium(VI) afforded the corresponding transition metal complexes. The properties of the newly prepared complexes were analyse by elemental analyses, infrared, electronic spectra, 1H NMR as well as the magnetic susceptibility and conductivity measurement. The metal complexes exhibits different geometrical arrangements such as octahedral and square pyramidal coordination. Schiff base ligands and their metal complexes were tested against two pathogenic bacteria as Gram-positive and Gram-negative bacteria as well as one kind of fungi to study their biological activity. All the complexes exhibit antibacterial and antifungal activities against these organisms.

A geometric morphometric analysis of hominin lower molars: Evolutionary implications and overview of postcanine dental variation.

PubMed

Gómez-Robles, Aida; Bermúdez de Castro, José María; Martinón-Torres, María; Prado-Simón, Leyre; Arsuaga, Juan Luis

2015-05-01

Lower molars have been extensively studied in the context of hominin evolution using classic and geometric morphometric analyses, 2D and 3D approaches, evaluations of the external (outer enamel surface) and internal anatomy (dentine, pulp chamber, and radicular canals), and studies of the crown and root variation. In this study, we present a 2D geometric morphometric analysis of the crown anatomy of lower first, second, and third molars of a broad sample of hominins, including Pliocene and Lower, Middle, and Upper Pleistocene species coming from Africa, Asia, and Europe. We show that shape variability increases from first to second and third molars. While first molars tend to retain a relatively stable 5-cusped conformation throughout the hominin fossil record, second and third molars show marked distal reductions in later Homo species. This trend to distal reduction is similar to that observed in previous studies of premolars and upper second and third molars, and points to a correlated reduction of distal areas across the whole postcanine dentition. Results on lower molar variation, as well as on other postcanine teeth, show certain trends in European Pleistocene populations from the Atapuerca sites. Middle Pleistocene hominins from Sima de los Huesos show Neanderthal affinities and strong dental reduction, especially in the most distal molars. The degree of dental reduction in this population is stronger than that observed in classic Neanderthals. Homo antecessor hominins from Gran Dolina-TD6 have primitive lower teeth that contrast with their more derived upper teeth. The evolutionary implications of these dental affinities are discussed in light of recent paleogenetic studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mandibular molar root morphology in Neanderthals and Late Pleistocene and recent Homo sapiens.

PubMed

Kupczik, Kornelius; Hublin, Jean-Jacques

2010-11-01

Neanderthals have a distinctive suite of dental features, including large anterior crown and root dimensions and molars with enlarged pulp cavities. Yet, there is little known about variation in molar root morphology in Neanderthals and other recent and fossil members of Homo. Here, we provide the first comprehensive metric analysis of permanent mandibular molar root morphology in Middle and Late Pleistocene Homo neanderthalensis, and Late Pleistocene (Aterian) and recent Homo sapiens. We specifically address the question of whether root form can be used to distinguish between these groups and assess whether any variation in root form can be related to differences in tooth function. We apply a microtomographic imaging approach to visualise and quantify the external and internal dental morphologies of both isolated molars and molars embedded in the mandible (n=127). Univariate and multivariate analyses reveal both similarities (root length and pulp volume) and differences (occurrence of pyramidal roots and dental tissue volume proportion) in molar root morphology among penecontemporaneous Neanderthals and Aterian H. sapiens. In contrast, the molars of recent H. sapiens are markedly smaller than both Pleistocene H. sapiens and Neanderthals, but share with the former the dentine volume reduction and a smaller root-to-crown volume compared with Neanderthals. Furthermore, we found the first molar to have the largest average root surface area in recent H. sapiens and Neanderthals, although in the latter the difference between M(1) and M(2) is small. In contrast, Aterian H. sapiens root surface areas peak at M(2). Since root surface area is linked to masticatory function, this suggests a distinct occlusal loading regime in Neanderthals compared with both recent and Pleistocene H. sapiens. Copyright © 2010 Elsevier Ltd. All rights reserved.

Comparison of different grafting materials for treatment of bone defect distal to the molar in canine.

PubMed

Ge, Jing; Yang, Chi; Wang, Yong; Zheng, Jiawei; Hua, Hongfei; Zhu, Jun

2018-03-25

The extraction of impacted mandibular 3rd molar is highly related to bone defect distal to the adjacent 2nd molar. The aim of this study was to evaluate the effect of different grafting materials for the treatment of bone defect distal to the mandibular molar in canine model. In 12 beagle dogs, bilateral mandibular 2nd and 3rd molars were extracted and entire mesial bone of the 2nd molar extracted socket was surgically removed. Twenty-four bone defects (4 mm width and 8 mm depth) were randomly assigned to 4 groups, and grafted using 1 of the following protocols: (1) group C: no graft; (2) group Ta: autogenous bone (AB); (3) group Tb: deproteinized bovine bone mineral (DBBM) with a collagen membrane (CM); and (4) group Tab: an equal mixture of AB/DBBM + CM. Quantitative imageology analyses using micro-CT and fluorescence microscopy, as well as qualitative analyses using histological and histomorphometric evaluations, were characterized at postoperative 12 weeks. Significant differences of all variables were tested by multivariate analysis (P < .05). The defect depth was significantly lower in groups Ta, Tb, and Tab (1.70, 1.97, and 1.61 mm, respectively; mean) than in the group C (3.66 mm, P < .01, all). Compared to the sites received DBBM/CM, sites grafted with AB or AB/DBBM exhibited significant greater and faster new bone formation (P < .01). The percentage of DBBM remnants area (%) was significantly higher in group Tb than in group Tab (10.43% and 1.13%, P < .01; mean). Our data suggested grafting AB alone, DBBM/CM, or AB/DBBM/CM resulted in similar periodontal parameters in canine. Furthermore, the AB could accelerate new bone regeneration and mineralization, and promote the biodegradation of DBBM. © 2018 Wiley Periodicals, Inc.

Problems of comparing blood glucose molality and molarity determined with an Omni, an EML 105 and an Ebio analyser.

PubMed

Haeckel, Rainer; Hänecke, Petra

2003-07-01

The comparability between glucose concentrations measured in various sample systems is still a matter of debate. Decision limits are usually determined in venous plasma and then converted to either blood or to the aqueous compartment (activity). The conversion factors recommended have not yet been generally accepted. In the present study, glucose concentrations were determined in blood and plasma with an Ebio analyser (molarity) and in the aqueous compartment with both an EML 105 and an Omni (molality). All analytical results were referred to the same aqueous standard solution. The Ebio results agreed with reference method values in control materials. Concentrations determined in the various sample systems from patients (molarity) correlated well with the molality values measured either with the EML or the Omni. However, the mean values of the EML were not consistent with those derived theoretically by considering the different water content. With the Omni, only molality values in whole blood appeared plausible, but not in plasma, although the two sample systems should provide identical molality values. The EML results were almost identical in whole blood and plasma. Theoretically, glucose molality would be the ideal diagnostic quantity. However, no diagnostic advantage of molality determined in whole blood with the Omni vs. molarity values could be detected in a group of 40 non-diabetic and 27 diabetic subjects.

Isentropic expansion and related thermodynamic properties of non-ionic amphiphile-water mixtures.

PubMed

Reis, João Carlos R; Douhéret, Gérard; Davis, Michael I; Fjellanger, Inger Johanne; Høiland, Harald

2008-01-28

A concise thermodynamic formalism is developed for the molar isentropic thermal expansion, ES,m = ( partial differential Vm/ partial differential T)(Sm,x), and the ideal and excess quantities for the molar, apparent molar and partial molar isentropic expansions of binary liquid mixtures. Ultrasound speeds were determined by means of the pulse-echo-overlap method in aqueous mixtures of 2-methylpropan-2-ol at 298.15 K over the entire composition range. These data complement selected extensive literature data on density, isobaric heat capacity and ultrasound speed for 9 amphiphile (methanol, ethanol, propan-1-ol, propan-2-ol, 2-methylpropan-2-ol, ethane-1,2-diol, 2-methoxyethanol, 2-ethoxyethanol or 2-butoxyethanol)-water binary systems, which form the basis of tables listing molar and excess molar isobaric expansions and heat capacities, and molar and excess molar isentropic compressions and expansions at 298.15 K and at 65 fixed mole fractions spanning the entire composition range and fine-grained in the water-rich region. The dependence on composition of these 9 systems is graphically depicted for the excess molar isobaric and isentropic expansions and for the excess partial molar isobaric and isentropic expansions of the amphiphile. The analysis shows that isentropic thermal expansion properties give a much stronger response to amphiphile-water molecular interactions than do their isobaric counterparts. Depending on the pair property-system, the maximum excess molar isentropic value is generally twenty- to a hundred-fold greater than the corresponding maximum isobaric value, and occurs at a lower mole fraction of the amphiphile. Values at infinite dilution of the 9 amphiphiles in water are given for the excess partial molar isobaric heat capacity, isentropic compression, isobaric expansion and isentropic expansion. These values are interpreted in terms of the changes occurring when amphiphile molecules cluster into an oligomeric form. Present results are discussed from theoretical and experimental thermodynamic viewpoints. It is concluded that isentropic thermal expansion properties constitute a new distinct resource for revealing particular features and trends in complex mixing processes, and that analyses using these new properties compare favourably with conventional approaches.

Pain following foraminal enlargement in mandibular molars with necrosis and apical periodontitis: A randomized controlled trial.

PubMed

Saini, H R; Sangwan, P; Sangwan, A

2016-12-01

This randomized controlled trial was conducted to evaluate the effect of foraminal enlargement during chemomechanical root canal preparation on postoperative pain. Seventy mandibular first molars with asymptomatic pulp necrosis and chronic apical periodontitis were randomized into two groups - foraminal enlargement (FE) and conventional nonforaminal enlargement (NFE). Canals were prepared according to the respective protocols, and the teeth were restored temporarily. Postoperatively, the patients were prescribed ibuprofen 400 mg, to be taken if required. Pain experience and analgesic intake were recorded for 7 days following chemomechanical preparation. The data were analysed using Mann-Whitney U-test and chi-square tests. Pain experience was higher with foraminal enlargement than when using a conventional technique. A significant difference was observed in postoperative pain during the first 4 days and the sixth day (P < 0.05), with greater pain in the FE as compared to the NFE group. There was no significant difference in prevalence of analgesic intake and number of doses between the experimental groups (P > 0.05). Enlargement of the apical foramen during root canal treatment increased the incidence and intensity of postoperative pain. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Mechano-hydrothermal preparation of Li-Al-OH layered double hydroxides

NASA Astrophysics Data System (ADS)

Zhang, Fengrong; Hou, Wanguo

2018-05-01

A mechano-hydrothermal (MHT) method was used to synthesize Li-Al-OH layered double hydroxides (LDHs) from LiOH·H2O, Al(OH)3 and H2O as starting materials. A two-step synthesis was conducted, that is, Al(OH)3 was milled for 1 h, followed by hydrothermal treatment with LiOH·H2O solution. Effects of the LiOH/Al(OH)3 molar ratio (RLi/Al) and hydrothermal temperature (Tht) on the crystallinity, morphology, and composition of the product were examined. The resulting LDHs were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared, and elemental analyses. The results showed that pre-milling plays a key role in the LDH formation during subsequent hydrothermal treatment. The Li/Al molar ratio of the obtained LDHs keeps constant at 0.5, independent from theRLi/Al (0.5-5.0) in the starting materials. An increase in the Tht (20-80 °C) can enhance the crystallinity and morphology regularity of the products. The so-obtained Li-Al-OH LDHs exhibit high crystallinity and well-dispersity, which may have wider applications than the aggregate ones obtained using conventional mechanochemical and Li+-imbibition methods.

Dental and skeletal changes after intraoral molar distalization with sectional jig assembly.

PubMed

Gulati, S; Kharbanda, O P; Parkash, H

1998-09-01

The present study was conducted on 10 subjects to evaluate dental and skeletal changes after intraoral molar distalization. The maxillary molars were distalized with a sectional jig assembly. Sentalloy open coil springs were used to exert 150 gm of force for a period of 12 weeks. A modified Nance appliance was the main source of anchorage. The pre- and postdistalization records included dental study casts, clinical photographs, and cephalograms. A total of 665 readings recorded from lateral cephalograms and dental casts were subjected to statistical analysis. The mean distal movement of the first molar was 2.78 mm, which was highly significant (o < 0.001). It moved distally at the rate of 0.86 mm/month. There was clinically some distal tipping (3.50 degrees) and distopalatal rotation (2.40 degrees). These changes were statistically significant (p < 0.001). The second molars accompanied the first molars and moved distally by nearly the same amount. There was 1.00 mm increase in the overjet and 2.60 degrees mesial tip of second premolar. The changes in the facial skeleton and dentition bases were minimal and statistically not significant. However, there was clockwise rotation of the mandible of 1.30 degrees that was statistically significant. This was the result of molar extrusion (1.60 mm).

Odontometric analysis of permanent maxillary first molar in gender determination.

PubMed

Shireen, Ayesha; Ara, Syeda Arshiya

2016-01-01

This study was conducted to assess the sex determination potential from mesiodistal (MD) and buccolingual (BL) dimensions of permanent maxillary first molar. The study was conducted in the Department of Oral Medicine and Radiology, Al-Badar Rural Dental College and Hospital, Gulbarga, Karnataka, on 600 subjects (300 male and 300 female), aged 17-25 years. The subjects were selected based on the inclusion and exclusion criteria set forth for the study. After obtaining informed consent, the intraoral measurements of MD and BL dimensions on casts of the first maxillary molars were taken using digital vernier caliper with resolution of 0.01 mm. The data obtained were subjected to statistical analysis using paired and unpaired t -test to compare MD and BL dimensions between males and females. P ≤0.05 was considered statistically significant. The mean MD width of the first maxillary molar was 10.60 ± 0.6644 mm (right) and 10.60 ± 0.6644 mm (left) in males and 10.40 ± 0.6255 mm (right) and 10.40 ± 0.6255 mm (left) in females. The mean BL width of the first maxillary molar was 11.60 ± 1.2227 mm (right) and 11.60 ± 1.2227 mm (left) in males and 11.20 ± 0.8440 mm (right) and 11.20 ± 0.8440 mm (left) in females. The differences between males and females in MD and BL dimensions measured were statistically significant ( P < 0.05). Right and left MD dimensions exhibited sexual dimorphism of 1.92% and right and left BL dimensions exhibited sexual dimorphism of 3.57%. The MD and BL dimensions of the maxillary first molars may be used as an aid in sex discrimination.

Economic modeling of sealing primary molars using a "value of information" approach.

PubMed

Ney, J P; van der Goes, D N; Chi, D L

2014-09-01

The objective was to evaluate 2 primary molar sealant strategies for publicly insured children using an "expected value of perfect information" (EVPI) approach. We converted a 10,000-observation tooth-level cost-effectiveness simulation model comparing 2 primary molar sealant strategies - always seal (AS) and standard care (SC) - with a 1,250-observation child-level model. Costs per child per restoration or extraction averted were estimated. Opportunity losses under the AS strategy were determined for children for whom SC was the optimal choice. We determined the EVPI by multiplying mean opportunity losses by the projected incident population of publicly insured 3-year-olds in the US over 10 years with costs discounted at 2%. All analyses were conducted under assumptions of high and low intrachild correlations between at-risk teeth. The AS strategy cost $43.68 over SC (95% CI: -$5.50, $92.86) per child per restoration or extraction averted under the high intrachild correlation assumption and $15.54 (95% CI $7.86, $23.20) under the low intrachild correlation. Under high intrachild correlation, mean opportunity losses were $80.28 (95% CI: $76.39, $84.17) per child, and AS was the optimal strategy in 31% of children. Under low correlation, mean opportunity losses were $14.61 (95% CI: $12.20, $17.68) and AS was the optimal strategy in 87% of children. The EVPI was calculated at $530,813,740 and $96,578,389 (for high and low intrachild correlation, respectively), for a projected total incident population of 8,059,712 children. On average, always sealing primary molars is more effective than standard care, but widespread implementation of this preventive approach among publicly insured children would result in large opportunity losses. Additional research is needed to identify the subgroups of publicly insured children who would benefit the most from this effective and potentially cost-saving public health intervention. © International & American Associations for Dental Research.

Studies on DNA binding behaviour of biologically active transition metal complexes of new tetradentate N2O2 donor Schiff bases: inhibitory activity against bacteria.

PubMed

Sobha, S; Mahalakshmi, R; Raman, N

2012-06-15

A series of Cu(II), Ni(II) and Zn(II) complexes of the type ML have been synthesized with Schiff bases derived from o-acetoacetotoluidide, 2-hydroxybenzaldehyde and o-phenylenediamine/1,4-diaminobutane. The complexes are insoluble in common organic solvents but soluble in DMF and DMSO. The measured molar conductance values in DMSO indicate that the complexes are non-electrolytic in nature. All the six metal complexes have been fully characterized with the help of elemental analyses, molecular weights, molar conductance values, magnetic moments and spectroscopic data. The analytical data helped to elucidate the structure of the metal complexes. The Schiff bases are found to act as tetradentate ligands using N(2)O(2) donor set of atoms leading to a square-planar geometry for the complexes around all the metal ions. The binding properties of metal complexes with DNA were investigated by absorption spectra, viscosity measurements and cyclic voltammetry. Detailed analysis reveals that the metal complexes intercalate into the DNA base stack as intercalators. All the metal complexes cleave the pUC19 DNA in presence of H(2)O(2.) The Schiff bases and their complexes have been screened for their antibacterial activity against five bacterial strains (Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus epidermidis, Klebsiella pneumoniae) by disk diffusion method. All the metal complexes have potent biocidal activity than the free ligands. Copyright © 2012 Elsevier B.V. All rights reserved.

The inter-relationship between dietary and environmental properties and tooth wear: comparisons of mesowear, molar wear rate, and hypsodonty index of extant Sika deer populations.

PubMed

Kubo, Mugino Ozaki; Yamada, Eisuke

2014-01-01

In reference to the evolutionary trend of increasing cheek tooth height in herbivorous ungulates, the causes of dental abrasion have long been debated. Interspecific comparisons of extant ungulates have revealed that both phytoliths in grass and external abrasive matter may play important roles. Using analysis of extant sika deer living in various environments and showing continuous latitudinal variation in food habits from northern grazing to southern browsing, we quantitatively evaluated the influence of dietary and environmental properties on three dental variables: mesowear score (MS), molar wear rate, and M3 hypsodonty index. We used 547 skulls and 740 mandibles from 16 populations of sika deer to obtain the dental measurements. We found that only graminoid proportion in diet correlated with MS and the molar wear rate, implying that phytoliths in grass abrade dental tissues. In contrast, annual precipitation in habitat was not correlated with any of the dental variables. We also found a significant correlation between the molar wear rate (selective pressure for high-crowned molars) and the M3 hypsodonty index of extant sika deer, implying an evolutionary increment in molar height corresponding to the molar wear rate. Our intraspecific comparative analyses provide further support for use of mesowear analysis as a paleodiet estimation method; it not only reveals staple food types (graminoids or dicots) but also implies regional or seasonal variation in the diet of the species.

The Inter-Relationship between Dietary and Environmental Properties and Tooth Wear: Comparisons of Mesowear, Molar Wear Rate, and Hypsodonty Index of Extant Sika Deer Populations

PubMed Central

Kubo, Mugino Ozaki; Yamada, Eisuke

2014-01-01

In reference to the evolutionary trend of increasing cheek tooth height in herbivorous ungulates, the causes of dental abrasion have long been debated. Interspecific comparisons of extant ungulates have revealed that both phytoliths in grass and external abrasive matter may play important roles. Using analysis of extant sika deer living in various environments and showing continuous latitudinal variation in food habits from northern grazing to southern browsing, we quantitatively evaluated the influence of dietary and environmental properties on three dental variables: mesowear score (MS), molar wear rate, and M3 hypsodonty index. We used 547 skulls and 740 mandibles from 16 populations of sika deer to obtain the dental measurements. We found that only graminoid proportion in diet correlated with MS and the molar wear rate, implying that phytoliths in grass abrade dental tissues. In contrast, annual precipitation in habitat was not correlated with any of the dental variables. We also found a significant correlation between the molar wear rate (selective pressure for high-crowned molars) and the M3 hypsodonty index of extant sika deer, implying an evolutionary increment in molar height corresponding to the molar wear rate. Our intraspecific comparative analyses provide further support for use of mesowear analysis as a paleodiet estimation method; it not only reveals staple food types (graminoids or dicots) but also implies regional or seasonal variation in the diet of the species. PMID:24603896

The presence of accessory cusps in chimpanzee lower molars is consistent with a patterning cascade model of development

PubMed Central

Skinner, Matthew M; Gunz, Philipp

2010-01-01

Tooth crown morphology is of primary importance in fossil primate systematics and understanding the developmental basis of its variation facilitates phenotypic analyses of fossil teeth. Lower molars of species in the chimp/human clade (including fossil hominins) possess between four and seven cusps and this variability has been implicated in alpha taxonomy and phylogenetic systematics. What is known about the developmental basis of variation in cusp number – based primarily on experimental studies of rodent molars – suggests that cusps form under a morphodynamic, patterning cascade model involving the iterative formation of enamel knots. In this study we test whether variation in cusp 6 (C6) presence in common chimpanzee and bonobo lower molars (n = 55) is consistent with predictions derived from the patterning cascade model. Using microcomputed tomography we imaged the enamel-dentine junction of lower molars and used geometric morphometrics to examine shape variation in the molar crown correlated with variation in C6 presence (in particular the size and spacing of the dentine horns). Results indicate that C6 presence is consistent with predictions of a patterning cascade model, with larger molars exhibiting a higher frequency of C6 and with the location and size of later-forming cusps correlated with C6 variation. These results demonstrate that a patterning cascade model is appropriate for interpreting cusp variation in Pan and have implications for cusp nomenclature and the use of accessory cusp morphology in primate systematics. PMID:20629983

Demirjian's method in the estimation of age: A study on human third molars.

PubMed

Lewis, Amitha J; Boaz, Karen; Nagesh, K R; Srikant, N; Gupta, Neha; Nandita, K P; Manaktala, Nidhi

2015-01-01

The primary aim of the following study is to estimate the chronological age based on the stages of third molar development following the eight stages (A to H) method of Demirjian et al. (along with two modifications-Orhan) and secondary aim is to compare third molar development with sex and age. The sample consisted of 115 orthopantomograms from South Indian subjects with known chronological age and gender. Multiple regression analysis was performed with chronological age as the dependable variable and third molar root development as independent variable. All the statistical analysis was performed using the SPSS 11.0 package (IBM ® Corporation). Statistically no significant differences were found in third molar development between males and females. Depending on the available number of wisdom teeth in an individual, R (2) varied for males from 0.21 to 0.48 and for females from 0.16 to 0.38. New equations were derived for estimating the chronological age. The chronological age of a South Indian individual between 14 and 22 years may be estimated based on the regression formulae. However, additional studies with a larger study population must be conducted to meet the need for population-based information on third molar development.

Effect of certain alkaline metals on Pr doped glasses to investigate spectroscopic studies

NASA Astrophysics Data System (ADS)

Lenkennavar Susheela, K.; Madhu, A.; Eraiah, B.; Kokila, M. K.

2018-02-01

Incorporation of different Alkaline earth metal like Barium, Calcium and strontium in sodium lead borate glass doped with Pr3+ is studied. Physical parameters such as density, molar volume, molar refractivity etc have been evaluated. Effect of different atomic size of alkaline metal using optical and physical parameters is analysed. XRD and FTIR were carried out to know the structural behaviour of the glasses. Absorption and Emission spectra are recorded at room temperature and the results were discussed.

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars

PubMed Central

Abarca, J.; Zaror, C.; Monardes, H.; Hermosilla, V.; Muñoz, C.; Cantin, M.

2015-01-01

SUMMARY Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3–5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24–0.33 mm in maxillary first molars and between 0.25–0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully. PMID:25937698

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars.

PubMed

Abarca, J; Zaror, C; Monardes, H; Hermosilla, V; Muñoz, C; Cantin, M

2014-06-01

Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3-5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24-0.33 mm in maxillary first molars and between 0.25-0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully.

An original micro-CT study and meta-analysis of the internal and external anatomy of maxillary molars - implications for endodontic treatment.

PubMed

Tomaszewska, Iwona M; Jarzębska, Anna; Skinningsrud, Bendik; Pękala, Przemysław A; Wroński, Sebastian; Iwanaga, Joe

2018-05-07

The aim of this work was to conduct a radiological micro-CT study and meta-analysis to determine the morphological features of the root canal anatomy of the maxillary molars. The radiological study included micro-CT scans of 110 maxillary first molars and 98 maxillary second molars. To identify articles eligible for inclusion in our meta-analysis, PubMed, Embase, and Web of Science were search comprehensively. The following data were extracted: study type (cadaveric, intraoperative or imaging), Vertucci types of canal configuration, presence/number of canals, roots, apical foramina, apical deltas, and inter-canal communications. The mesiobuccal root was the most variable with respect to canal configuration, type I being the most common configuration followed by type II and type IV. Type I was the most common canal configuration in the distobuccal and palatal root. Regarding the number of canals in the maxillary first and second molars, one canal was most prevalent in all roots of the three molars, except for the mesiobuccal root of maxillary first molar, in which two canals were most prevalent. The most prevalent number of roots in all maxillary molars was three. Knowledge of endodontic anatomy determines the parameters of root canal treatment and significantly affects the probability of success. It is therefore especially important to know the morphology of the root canal system in order to perform endodontic treatment correctly. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.

Pre-eruptive intracoronal resorption in a third upper molar: clinical, tomographic and histological analysis.

PubMed

Lenzi, R; Marceliano-Alves, M F; Alves, Frf; Pires, F R; Fidel, S

2017-06-01

Radiolucent or hypodense lesions in the crown of unerupted teeth may be due to pre-eruptive intracoronal resorption. Clinicians must be aware of this risk so that they can diagnose and appropriately treat this condition. The purpose of this study is to present a well-documented clinical case of pre-eruptive intracoronal resorption in an impacted third upper left molar of a 63 year old female patient. This was an unexpected finding, which occurred after cone-beam computed tomography was used to investigate the first upper left molar, which had an acute periradicular abscess. A multidisciplinary team followed up the case to describe clinical, radiographic and histological findings. The available treatment options were discussed, and the tooth extraction was the option chosen. Previous case studies describing such resorption in third upper molars have not been reported. This case shows that all permanent teeth in a pre-eruptive stage must be analysed radiographically to detect early pre-eruptive intracoronal resorption. © 2016 Australian Dental Association.

Dual origin of tribosphenic mammals.

PubMed

Luo, Z X; Cifelli, R L; Kielan-Jaworowska, Z

2001-01-04

Marsupials, placentals and their close therian relatives possess complex (tribosphenic) molars that are capable of versatile occlusal functions. This functional complex is widely thought to be a key to the early diversification and evolutionary success of extant therians and their close relatives (tribosphenidans). Long thought to have arisen on northern continents, tribosphenic mammals have recently been reported from southern landmasses. The great age and advanced morphology of these new mammals has led to the alternative suggestion of a Gondwanan origin for the group. Implicit in both biogeographic hypotheses is the assumption that tribosphenic molars evolved only once in mammalian evolutionary history. Phylogenetic and morphometric analyses including these newly discovered taxa suggest a different interpretation: that mammals with tribosphenic molars are not monophyletic. Tribosphenic molars evolved independently in two ancient (holotherian) mammalian groups with different geographic distributions during the Jurassic/Early Cretaceous: an australosphenidan clade endemic to Gondwanan landmasses, survived by extant monotremes; and a boreosphenidan clade of Laurasian continents, including extant marsupials, placentals and their relatives.

Continuously growing rodent molars result from a predictable quantitative evolutionary change over 50 million years

PubMed Central

Mushegyan, Vagan; Eronen, Jussi T.; Lawing, A. Michelle; Sharir, Amnon; Janis, Christine; Jernvall, Jukka; Klein, Ophir D.

2015-01-01

Summary The fossil record is widely informative about evolution, but fossils are not systematically used to study the evolution of stem cell-driven renewal. Here, we examined evolution of the continuous growth (hypselodonty) of rodent molar teeth, which is fuelled by the presence of dental stem cells. We studied occurrences of 3500 North American rodent fossils, ranging from 50 million years ago (mya) to 2 mya. We examined changes in molar height to determine if evolution of hypselodonty shows distinct patterns in the fossil record, and we found that hypselodont taxa emerged through intermediate forms of increasing crown height. Next, we designed a Markov simulation model, which replicated molar height increases throughout the Cenozoic, and, moreover, evolution of hypselodonty. Thus, by extension, the retention of the adult stem-cell niche appears to be a predictable quantitative rather than a stochastic qualitative process. Our analyses predict that hypselodonty will eventually become the dominant phenotype. PMID:25921530

Direct pulp capping in primary molars using a resin-modified Portland cement-based material (TheraCal) compared to MTA with 12-month follow-up: a randomised clinical trial.

PubMed

Erfanparast, L; Iranparvar, P; Vafaei, A

2018-05-16

This study was to compare the success of resin-modified Portland cement-based material (TheraCal) with MTA in direct pulp capping (DPC) of primary molars. Symmetrical bilateral primary molars (92) from 46 healthy subjects aged 5-7 years were included in this split-mouth randomised clinical trial. DPC for small non-contaminated pulp exposures using either TheraCal or MTA were randomly performed in symmetrical molars. Thereafter, teeth were restored with amalgam. Clinical and radiographic evaluations were performed at 6 and 12 month follow-ups. Data were analysed using Chi square test at a significance level of 0.05. At the final follow-up session 74 teeth were available. After 12 months, the overall success rates for MTA and TheraCal were 94.5 and 91.8%, respectively. The difference between outcomes of the two groups was not statistically significant (P > 0.05). Within the limitations of the current study, radiographic and clinical findings revealed that TheraCal exhibited a comparable outcome to MTA in DPC of primary molars after 12 months.

Factors associated with complications of removal of third molars: a transversal study.

PubMed

Barbosa-Rebellato, Nelson-Luis; Thomé, Ana-Carolina; Costa-Maciel, Cássia; Oliveira, Jaina; Scariot, Rafaela

2011-05-01

The purpose of this study is to estimate the overall frequency of complications associated with third molars (M3) removal and to identify the risk factors associated with these complications. To the transversal analysis, a researcher confidentially reviewed the records of all M3 surgery patients. The predictor variables were demographic (i.e. age and gender), localization and position of third molar, bone removal and tooth sectioning. 210 patients had one or more third molars teeth removed, a total of 605 teeth. The sample's mean age was 21.6±9.2 years, with 1,4 woman to 1 man. Postoperative complications were recorded in 54 extractions of third molars. The most common complications were infection (42.6%), followed by radicular fractures (11.1%) and gingival alterations (11.1%). Complications were significantly affected by 3 factors: age over 25 years old (p=0.002--OR 2.21), location (p=0.006--OR 2.36), bone removal (p=0.002--OR 3.03) and tooth sectioning (p=0.00002--OR 3.59). The results of these analyses suggest that age, location of the tooth, bone removal and tooth sectioning appear to be associated with a higher complication rate for M3 extractions.

A Cohort Study of the Patterns of Third Molar Impaction in Panoramic Radiographs in Saudi Population

PubMed Central

Al-Dajani, Mahmoud; Abouonq, Anas O; Almohammadi, Turki A; Alruwaili, Mohammed K; Alswilem, Rayan O; Alzoubi, Ibrahim A

2017-01-01

Objectives: To evaluate the epidemiological patterns of third molar impaction in a cohort of patients living in the north of Saudi Arabia. Materials and Methods: A retrospective cohort study comprised of analysing 2550 Orthopantomograms (OPGs) belonging to patients who attended Aljouf University College of Dentistry between September 2013 and December 2015. OPGs were examined to determine the frequency of third molar impaction, their levels of eruption and angulations. Mixed effects logistic regression analysis was performed to calculate adjusted odds ratios. Data were weighted by age and sex based on population regional estimates. Results: 1551 patients (60.8%) with a mean age of 33.5 years-old (95%CI: 32.9 to 34) demonstrated 2650 impacted third molars. Third molars were more likely present in patients aged from 20 to 39 years-old (p<0.001); and in mandible more than maxilla (p<0.001). It showed highest vertical impaction and higher impaction rate in mandible than maxilla. Level A impaction was the most common among other levels by 1365 (53.5%). Vertical impaction was the most common pattern (1354 patients; 53.1%). Mesioangular impaction ranked second in mandible, while distoangular impaction ranked second in maxilla. There was no statistically significant difference between males and females concerning impaction frequency, depth levels and angulations. Conclusion: Impacted third molars is still a public health concern among youth and young adults. Vertically impacted mandibular third molars with their occlusal plane at the same level as the occlusal plane of adjacent tooth is the most prevalent pattern of third molar impaction in the northern region of Saudi Arabia. PMID:29387281

Evaluation of skeletal maturity using maxillary canine, mandibular second and third molar calcification stages.

PubMed

Trakinienė, Giedrė; Smailienė, Dalia; Kučiauskienė, Ainė

2016-08-01

The objective of this study was to evaluate whether the calcification stages of maxillary canine, mandibular second molar, and mandibular third molar can be used for assessment of growth phase. The study group consisted of 274 subjects. Pre-treatment digital panoramic and lateral cephalometric radiographs of the patients were analysed. The patients' age was ranging from 7 to 19 years. Right maxillary canine, mandibular second molar and third molar were used as a sample. The teeth mineralization was assessed using modification of Gleiser and Hunt method. The skeletal maturation was assessed by the cervical vertebrae maturation (CVM) method. A significant association was found between CVM stage 2 and maxillary canine (UC) stage 4, mandibular second molar (LM2) stage 4, and mandibular third molar (LM3) stage 1. CVM stage 3 corresponded with UC stage 5, LM2 stage 5, LM3 stage 2. CVM stage 4 matched with UC stage 5, LM2 stage 6 and LM3 stage 3. The highest correlations between CVM and calcification stages were in the group of the maxillary canine (r = 0.812, P < 0.01) and mandibular second molar (r = 0.824, P < 0.01). Limitation of our study was that the study sample was not very big and the distribution value in the groups was very high, so it was impossible to check more statistical parameters. The calcification stages of UC, LM2, and LM3 as indicators of skeletal maturity could be clinically used with caution, until this method is verified with a larger sample group. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Electrical conductivity of electrolytes applicable to natural waters from 0 to 100 degrees C

USGS Publications Warehouse

McCleskey, R. Blaine

2011-01-01

The electrical conductivities of 34 electrolyte solutions found in natural waters ranging from (10-4 to 1) mol•kg-1 in concentration and from (5 to 90) °C have been determined. High-quality electrical conductivity data for numerous electrolytes exist in the scientific literature, but the data do not span the concentration or temperature ranges of many electrolytes in natural waters. Methods for calculating the electrical conductivities of natural waters have incorporated these data from the literature, and as a result these methods cannot be used to reliably calculate the electrical conductivity over a large enough range of temperature and concentration. For the single-electrolyte solutions, empirical equations were developed that relate electrical conductivity to temperature and molality. For the 942 molar conductivity determinations for single electrolytes from this study, the mean relative difference between the calculated and measured values was 0.1 %. The calculated molar conductivity was compared to literature data, and the mean relative difference for 1978 measurements was 0.2 %. These data provide an improved basis for calculating electrical conductivity for most natural waters.

Ability of mini-implant-facilitated micro-osteoperforations to accelerate tooth movement in rats.

PubMed

Cheung, Tracy; Park, Juyoung; Lee, Deborah; Kim, Catherine; Olson, Jeffrey; Javadi, Shadi; Lawson, Gregory; McCabe, James; Moon, Won; Ting, Kang; Hong, Christine

2016-12-01

Although current techniques for accelerated tooth movement often involve invasive surgical procedures, micro-osteoperforations (MOPs) using mini-implants may facilitate orthodontic tooth movement without raising flaps, reduce surgical risks, and increase patient acceptance. In this study, we evaluated the effectiveness of mini-implant-facilitated MOPs in inducing accelerated tooth movement and investigated the potential risks for root resorption. Five MOPs were placed on the left side around the maxillary first molars in 6 rats using an automated mini-implant driver, whereas the right side received no MOPs as the control. Closed-coiled springs were secured from incisors to first molars for orthodontic tooth movement. Tooth movement was measured, and samples underwent radiologic and histologic analyses. The MOP side exhibited a 1.86-fold increase in the rate of tooth movement with decreased bone density and bone volume around the first molars compared with the control side. Hematoxylin and eosin and tartrate-resistant acid phosphatase analyses showed increased numbers of osteoclasts as well as new bone formation. Three-dimensional volumetric analysis of all 5 roots of the maxillary first molars demonstrated no statistically significant difference in root volumes. Mini-implant-facilitated MOPs accelerated tooth movement without increased risk for root resorption and therefore may become a readily available and efficient treatment option to shorten orthodontic treatment time with improved patient acceptance. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Dietary Ecology of Murinae (Muridae, Rodentia): A Geometric Morphometric Approach

PubMed Central

Gómez Cano, Ana Rosa; Hernández Fernández, Manuel; Álvarez-Sierra, M. Ángeles

2013-01-01

Murine rodents represent a highly diverse group, which displays great ecological versatility. In the present paper we analyse the relationship between dental morphology, on one hand, using geometric morphometrics based upon the outline of first upper molar and the dietary preference of extant murine genera, on the other. This ecomorphological study of extant murine rodents demonstrates that dietary groups can be distinguished with the use of a quantitative geometric morphometric approach based on first upper molar outline. A discriminant analysis of the geometric morphometric variables of the first upper molars enables us to infer the dietary preferences of extinct murine genera from the Iberian Peninsula. Most of the extinct genera were omnivore; only Stephanomys showed a pattern of dental morphology alike that of the herbivore genera. PMID:24236090

Synthesis, characterization, DFT calculations and biological studies of Mn(II), Fe(II), Co(II) and Cd(II) complexes based on a tetradentate ONNO donor Schiff base ligand

NASA Astrophysics Data System (ADS)

Abdel-Rahman, Laila H.; Ismail, Nabawia M.; Ismael, Mohamed; Abu-Dief, Ahmed M.; Ahmed, Ebtehal Abdel-Hameed

2017-04-01

This study highlights synthesis and characterization of a tetradentate ONNO Schiff base ligand namely (1, 1‧- (pyridine-2, 3-dimethyliminomethyl) naphthalene-2, 2‧-diol) and hereafter denotes as "HNDAP″ and selected metal complexes including Mn(II), Fe(II), Co(II) and Cd(II) as a central metal. HNDAP was synthesized from 1:2 M ratio condensation of 2, 3-diaminopyridine and 2- hydroxy-1-naphthaldhyde, respectively. The stoichiometric ratios of the prepared complexes were estimated using complementary techniques such as; elemental analyses (-C, H, N), FT-IR, magnetic measurements and molar conductivity. Furthermore, their physicochemical studies were carried out using thermal TGA, DTA and kinetic-thermodynamic studies along with DFT calculations. The results of elemental analyses showed that these complexes are present in a 1:1 metal-to- ligand molar ratio. Moreover, the magnetic susceptibilities values at room temperature revealed that Mn(II), Fe(II) and Co(II) complexes are paramagnetic in nature and have an octahedral (Oh) geometry. In contrast, Cd(II) is diamagnetic and stabilizes in square planar sites. The molar conductivity measurements indicated that all complexes are nonelectrolytes in dimethyl formamide. Spectral data suggested that the ligand is as tetradentate and coordinated with Co(II) ion through two phenolic OH and two azomethine nitrogen. However, for Mn(II), Fe(II) and Cd(II) complexes, the coordination occurred through two phenolic oxygen and two azomethine nitrogen with deprotonation of OH groups. The proposed chemical structures have been validated by quantum mechanics calculations. Antimicrobial activities of both the HNDAP Schiff base ligand and its metal complexes were tested against strains of Gram (-ve) E. coli and Gram (+ve) B. subtilis and S. aureus bacteria and C. albicans, A. flavus and T. rubrum fungi. All the prepared compounds showed good results of inhibition against the selected pathogenic microorganisms. The investigated HNDAP Schiff base complexes showed higher activity and stability than their corresponding HNDAP Schiff base ligand and the highest activity observed for Cd(II) complex. Moreover, the prepared Schiff base ligand and its Mn(II) and Co(II) complexes have been evaluated for their anticancer activities against two cancer cell lines namely; colon carcinoma cells (HCT-116 cell line) and hepatocellular carcinoma (Hep-G2) cell lines The interaction of Mn(II) and Co(II) complexes with calf thymus DNA (CT-DNA) was studied by absorption spectroscopic technique and viscosity measurements. Both complexes showed a successful interaction with CT-DNA via intercalation mode.

Insight to the Thermal Decomposition and Hydrogen Desorption Behaviors of NaNH2-NaBH4 Hydrogen Storage Composite.

PubMed

Pei, Ziwei; Bai, Ying; Wang, Yue; Wu, Feng; Wu, Chuan

2017-09-20

The lightweight compound material NaNH 2 -NaBH 4 is regarded as a promising hydrogen storage composite due to the high hydrogen density. Mechanical ball milling was employed to synthesize the composite NaNH 2 -NaBH 4 (2/1 molar ratio), and the samples were investigated utilizing thermogravimetric-differential thermal analysis-mass spectroscopy (TG-DTA-MS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) analyses. The full-spectrum test (range of the ratio of mass to charge: 0-200) shows that the released gaseous species contain H 2 , NH 3 , B 2 H 6 , and N 2 in the heating process from room temperature to 400 °C, and possibly the impurity gas B 6 H 12 also exists. The TG/DTA analyses show that the composite NaNH 2 -NaBH 4 (2/1 molar ratio) is conductive to generate hydrogen so that the dehydrogenation process can be finished before 400 °C. Moreover, the thermal decomposition process from 200 to 400 °C involves two-step dehydrogenation reactions: (1) Na 3 (NH 2 ) 2 BH 4 hydride decomposes into Na 3 BN 2 and H 2 (200-350 °C); (2) remaining Na 3 (NH 2 ) 2 BH 4 reacts with NaBH 4 and Na 3 BN 2 , generating Na, BN, NH 3 , N 2 , and H 2 (350-400 °C). The better mechanism understanding of the thermal decomposition pathway lays a foundation for tailoring the hydrogen storage performance of the composite complex hydrides system.

Intraoral extraction of an ectopic mandibular third molar detected in the subcondylar region without a pathological cause: A case report and literature review.

PubMed

Okuyama, Kohei; Sakamoto, Yuki; Naruse, Tomofumi; Kawakita, Akiko; Yanamoto, Souichi; Furukawa, Kohei; Umeda, Masahiro

2017-09-01

To present a case report on the presence of an ectopic mandibular third molar (EMTM), the surgical treatment, and outcome. A 63-year-old woman presented with right preauricular facial swelling, limited jaw function, and pain. Radiographic assessment demonstrated an EMTM positioned in the superoposterior aspect of the ramus. Radiographically, there was a bony tunnel extending from the third molar to distal of the second molar. The patient was treated by an intraoral approach on the medial aspect of the ramus for removal of the ectopic third molar, as well as the tissue in the bony tunnel. The patient healed uneventfully. The soft tissue in the bony canal was granulation tissue, and nerve function was preserved. A literature search of EMTMs was conducted identifying 17 reported cases. Three-dimensional imaging in the management of EMTM can be beneficial in identifying position of the tooth, associated pathology, and identifying the position of neurovascular structures to aid in removal of the ectopic tooth.

Two novel macroacyclic schiff bases containing bis-N 2O 2 donor set and their binuclear complexes: synthesis, spectroscopic and magnetic properties

NASA Astrophysics Data System (ADS)

Karaoglu, Kaan; Baran, Talat; Serbest, Kerim; Er, Mustafa; Degirmencioglu, Ismail

2009-03-01

Herein, we report two novel macroacyclic Schiff bases derived from tetranaphthaldehyde derivative compound and their binuclear Mn(II), Ni(II), Cu(II) and Zn(II) complexes. The structures of the compounds have been proposed by elemental analyses, spectroscopic data i.e. IR, 1H and 13C NMR, UV-Vis, electrospray ionisation mass spectra, molar conductivities and magnetic susceptibility measurements. The stoichiometries of the complexes derived from mass and elemental analysis correspond to the general formula [M 2L(ClO 4) n](ClO 4) 4-n, (where M is Mn(II), Ni(II), Cu(II), Zn(II) and L represents the Schiff base ligands).

Efficacy of Platelet-Rich Fibrin After Mandibular Third Molar Extraction: A Systematic Review and Meta-Analysis.

PubMed

Al-Hamed, Faez Saleh; Tawfik, Mohamed Abdel-Monem; Abdelfadil, Ehab; Al-Saleh, Mohammed A Q

2017-06-01

To assess the effect of platelet-rich fibrin (PRF) on the healing process of the alveolar socket after surgical extraction of the mandibular third molars. PubMed, the Cochrane Central Register of Controlled Trials, Scopus, and relevant journals were searched using a combination of specific keywords ("platelet-rich fibrin," "oral surgery," and "third molar"). The final search was conducted on November 2, 2015. Randomized controlled clinical trials, as well as controlled clinical trials, aimed at comparing the effect of PRF versus natural healing after extraction of mandibular third molars were included. Five randomized controlled trials and one controlled clinical trial were included. There were 335 extractions (168 with PRF and 167 controls) in 183 participants. Considerable heterogeneity in study characteristics, outcome variables, and estimated scales was observed. Positive results were generally recorded for pain, trismus, swelling, periodontal pocket depth, soft tissue healing, and incidence of localized osteitis, but not in all studies. However, no meta-analysis could be conducted for such variables because of the different measurement scales used. The qualitative and meta-analysis results showed no significant improvement in bone healing with PRF-treated sockets compared with the naturally healing sockets. Within the limitations of the available evidence, PRF seems to have no beneficial role in bone healing after extraction of the mandibular third molars. Future standardized randomized controlled clinical trials are required to estimate the effect of PRF on socket regeneration. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Canal Configuration of Mesiobuccal Roots in Permanent Maxillary First Molars in Iranian Population: A Systematic Review.

PubMed

Naseri, Mandana; Kharazifard, Mohammad Javad; Hosseinpour, Sepanta

2016-11-01

It is essential for clinicians to have adequate knowledge about root canal configurations; although its morphology varies largely in different ethnicities and even in different individuals with the same ethnic background. The current study aims to review the root canal configurations of mesiobuccal roots of maxillary first molars in an Iranian population based on different epidemiological studies. A comprehensive search was conducted to retrieve articles related to root canal configuration and prevalence of each type of root canal based on Vertucci's classification for the mesiobuccal root of maxillary first molars. An electronic search was conducted in Medline, Scopus and Google Scholar from January 1984 to September 2015. The articles were evaluated and methods, population, number of teeth and percentage of each root canal type evaluated in each study were summarized in the data table. Websites such as http://www.magiran.com/ , http://health.barakatkns.com/journal-internal-list and www.sid.ir were used to search all related studies published in Persian. Totally, out of nine studies conducted on the Iranian populations in nine provinces of Iran and 798 teeth, the Vertucci's type I was the most common type (35.70%), followed by type II (30.37%), type IV (16.66%), type III (7.93%) and type V (2.61%). From this review article, it is concluded that the root canal morphology of mesiobuccal roots of maxillary first molars in the Iranian population predominantly has more than one canal. Therefore, careful evaluation of radiographs and anatomy of the pulp chamber is essential in order to achieve a successful root canal therapy.

Demirjian's method in the estimation of age: A study on human third molars

PubMed Central

Lewis, Amitha J.; Boaz, Karen; Nagesh, K. R; Srikant, N; Gupta, Neha; Nandita, K. P; Manaktala, Nidhi

2015-01-01

Aim: The primary aim of the following study is to estimate the chronological age based on the stages of third molar development following the eight stages (A to H) method of Demirjian et al. (along with two modifications-Orhan) and secondary aim is to compare third molar development with sex and age. Materials and Methods: The sample consisted of 115 orthopantomograms from South Indian subjects with known chronological age and gender. Multiple regression analysis was performed with chronological age as the dependable variable and third molar root development as independent variable. All the statistical analysis was performed using the SPSS 11.0 package (IBM ® Corporation). Results: Statistically no significant differences were found in third molar development between males and females. Depending on the available number of wisdom teeth in an individual, R2 varied for males from 0.21 to 0.48 and for females from 0.16 to 0.38. New equations were derived for estimating the chronological age. Conclusion: The chronological age of a South Indian individual between 14 and 22 years may be estimated based on the regression formulae. However, additional studies with a larger study population must be conducted to meet the need for population-based information on third molar development. PMID:26005306

Effect of molarity on sol-gel routed nano TiO2 thin films

NASA Astrophysics Data System (ADS)

Lourduraj, Stephen; Williams, Rayar Victor

The nanostructured titanium dioxide (TiO2) thin films have been prepared for the molar concentrations of titanium tetra isopropoxide (TTIP) 0.05M, 0.1M, 0.15M and 0.2M by sol-gel routed spin coating technique with calcination at 450∘C. The processing parameters such as, pH value (8), catalyst HCl (0.1ml), spin speed (3000rpm) and calcination temperature (450∘C) are optimized. The crystalline nature and surface morphology were analyzed by XRD, SEM and AFM analysis. The XRD results confirm that the films are crystalline with anatase phase, and are nanostructured. The SEM micrographs of the TiO2 film reveal the spherical nature of the particle. AFM analysis establishes that the uniformity of the TiO2 thin film was optimized at 0.2M. The optical measurements show that the transmittance depends on the molarity, and the optical band gap energy of TiO2 films is found to be inversely proportional to molarity. The I-V characteristics exhibit that the molarity strongly influences the electrical conductivity of the film. The results indicate that the significant effect of molarity on structural, optical and electrical properties of the nanostructured TiO2 thin films will be useful to photovoltaic application.

Linking molar organizational climate and strategic implementation climate to clinicians' use of evidence-based psychotherapy techniques: cross-sectional and lagged analyses from a 2-year observational study.

PubMed

Williams, Nathaniel J; Ehrhart, Mark G; Aarons, Gregory A; Marcus, Steven C; Beidas, Rinad S

2018-06-25

Behavioral health organizations are characterized by multiple organizational climates, including molar climate, which encompasses clinicians' shared perceptions of how the work environment impacts their personal well-being, and strategic implementation climate, which includes clinicians' shared perceptions of the extent to which evidence-based practice implementation is expected, supported, and rewarded by the organization. Theory suggests these climates have joint, cross-level effects on clinicians' implementation of evidence-based practice and that these effects may be long term (i.e., up to 2 years); however, no empirical studies have tested these relationships. We hypothesize that molar climate moderates implementation climate's concurrent and long-term relationships with clinicians' use of evidence-based practice such that strategic implementation climate will have its most positive effects when it is accompanied by a positive molar climate. Hypotheses were tested using data collected from 235 clinicians in 20 behavioral health organizations. At baseline, clinicians reported on molar climate and implementation climate. At baseline and at a 2-year follow-up, all clinicians who were present in the organizations reported on their use of cognitive-behavioral psychotherapy techniques, an evidence-based practice for youth psychiatric disorders. Two-level mixed-effects regression models tested whether baseline molar climate and implementation climate interacted in predicting clinicians' evidence-based practice use at baseline and at 2-year follow-up. In organizations with more positive molar climates at baseline, higher levels of implementation climate predicted increased evidence-based practice use among clinicians who were present at baseline and among clinicians who were present in the organizations at 2-year follow-up; however, in organizations with less positive molar climates, implementation climate was not related to clinicians' use of evidence-based practice at either time point. Optimizing clinicians' implementation of evidence-based practice in behavioral health requires attention to both molar climate and strategic implementation climate. Strategies that focus exclusively on implementation climate may not be effective levers for behavior change if the organization does not also engender a positive molar climate. These findings have implications for the development of implementation theory and effective implementation strategies.

Spectroscopic, thermal analysis and DFT computational studies of salen-type Schiff base complexes.

PubMed

Ebrahimi, Hossein Pasha; Hadi, Jabbar S; Abdulnabi, Zuhair A; Bolandnazar, Zeinab

2014-01-03

A new series of metal(II) complexes of Co(II), Ni(II), Cu(II), Zn(II), and Pb(II) have been synthesized from a salen-type Schiff base ligand derived from o-vanillin and 4-methyl-1,2-phenylenediamine and characterized by elemental analysis, spectral (IR, UV-Vis, (1)H NMR, (13)C NMR and EI-mass), molar conductance measurements and thermal analysis techniques. Coats-Redfern method has been utilized to calculate the kinetic and thermodynamic parameters of the metal complexes. The molecular geometry, Mulliken atomic charges of the studied compounds were investigated theoretically by performing density functional theory (DFT) to access reliable results to the experimental values. The theoretical (13)C chemical shift results of the studied compounds have been calculated at the B3LYP, PBEPBE and PW91PW91 methods and standard 6-311+G(d,p) basis set starting from optimized geometry. The comparison of the results indicates that B3LYP/6-311+G(d,p) yields good agreement with the observed chemical shifts. The measured low molar conductance values in DMF indicate that the metal complexes are non-electrolytes. The spectral and thermal analysis reveals that all complexes have octahedral geometry except Cu(II) complex which can attain the square planner arrangement. The presence of lattice and coordinated water molecules are indicated by thermograms of the complexes. The thermogravimetric (TG/DTG) analyses confirm high stability for all complexes followed by thermal decomposition in different steps. Copyright © 2013 Elsevier B.V. All rights reserved.

Synthesis, investigation and spectroscopic characterization of piroxicam ternary complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with glycine and DL-phenylalanine.

PubMed

Mohamed, Gehad G; El-Gamel, Nadia E A

2004-11-01

The ternary piroxicam (Pir; 4-hydroxy-2-methyl-N-(2-pyridyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide) complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with various amino acids (AA) such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized by elemental analyses, molar conductance, IR, UV-Vis, magnetic moment, diffuse reflectance and X-ray powder diffraction. The UV-Vis spectra of Pir and the effect of metal chelation on the different interligand transitions are discussed in detailed manner. IR and UV-Vis spectra confirm that Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its carboxylic group, in addition PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its carboxylic and amino groups. All the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. The molar conductance data reveal that most of these chelates are non electrolytes, while Fe(III)-Pir-Gly, Co(II)-, Ni(II)-, Cu(II)- and Zn(II)-Pir-PhA chelates were 1:1 electrolytes. X-ray powder diffraction is used as a new tool to estimate the crystallinity of chelates as well as to elucidate their geometrical structures.

Synthesis, investigation and spectroscopic characterization of piroxicam ternary complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with glycine and DL-phenylalanine

NASA Astrophysics Data System (ADS)

Mohamed, Gehad G.; El-Gamel, Nadia E. A.

2004-11-01

The ternary piroxicam (Pir; 4-hydroxy-2-methyl- N-(2-pyridyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide) complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with various amino acids (AA) such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized by elemental analyses, molar conductance, IR, UV-Vis, magnetic moment, diffuse reflectance and X-ray powder diffraction. The UV-Vis spectra of Pir and the effect of metal chelation on the different interligand transitions are discussed in detailed manner. IR and UV-Vis spectra confirm that Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine- N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its carboxylic group, in addition PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its carboxylic and amino groups. All the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. The molar conductance data reveal that most of these chelates are non electrolytes, while Fe(III)-Pir-Gly, Co(II)-, Ni(II)-, Cu(II)- and Zn(II)-Pir-PhA cheletes were 1:1 electrolytes. X-ray powder diffraction is used as a new tool to estimate the crystallinity of chelates as well as to elucidate their geometrical structures.

Synthesis, spectroscopic and antimicrobial studies of La(III), Ce(III), Sm(III) and Y(III) Metformin HCl chelates.

PubMed

Refat, Moamen S; Al-Azab, Fathi M; Al-Maydama, Hussein M A; Amin, Ragab R; Jamil, Yasmin M S; Kobeasy, Mohamed I

2015-05-05

Metal complexes of Metformin hydrochloride were prepared using La(III), Ce(III), Sm(III) and Y(III). The resulting complexes were discussed and synthesized to serve as potential insulin-mimetic. Some physical properties and analytical data of the four complexes were checked. The elemental analysis shows that La(III), Ce(III) Sm(III) and Y(III) formed complexes with Metformin in 1:3 (metal:MF) molar ratio. All the synthesized complexes are white and possess high melting points. These complexes are soluble in dimethylsulfoxide and dimethylformamide, partially soluble in hot methanol and insoluble in water and some other organic solvents. From the spectroscopic (infrared, UV-vis and florescence), effective magnetic moment and elemental analyses data, the formula structures are suggested. The results obtained suggested that Metformin reacted with metal ions as a bidentate ligand through its two imino groups. The molar conductance measurements proved that the Metformin complexes are slightly electrolytic in nature. The kinetic thermodynamic parameters such as: E(∗), ΔH(∗), ΔS(∗) and ΔG(∗) were estimated from the DTG curves. The antibacterial evaluations of the Metformin and their complexes were also performed against some gram positive, negative bacteria as well as fungi. Copyright © 2015 Elsevier B.V. All rights reserved.

Spectroscopic evaluation of Co(II), Ni(II) and Cu(II) complexes derived from thiosemicarbazone and semicarbazone

NASA Astrophysics Data System (ADS)

Chandra, Sulekh; Kumar, Anil

2007-12-01

Co(II), Ni(II) and Cu(II) complexes were synthesized with thiosemicarbazone (L 1) and semicarbazone (L 2) derived from 2-acetyl furan. These complexes were characterized by elemental analysis, molar conductance, magnetic moment, mass, IR, electronic and EPR spectral studies. The molar conductance measurement of the complexes in DMSO corresponds to non-electrolytic nature. All the complexes are of high-spin type. On the basis of different spectral studies six coordinated geometry may be assigned for all the complexes except Co(L) 2(SO 4) and Cu(L) 2(SO 4) [where L = L 1 and L 2] which are of five coordinated square pyramidal geometry.

Exploration of interactions between bioactive solutes and vitamin B9 in aqueous medium by physico-chemical contrivances

NASA Astrophysics Data System (ADS)

Roy, Mahendra Nath; Chakraborti, Palash; Ekka, Deepak

2014-09-01

Molecular interaction prevailing in α-amino acids (glycine, L-alanine, L-valine) and aqueous solution of folic acid (FA) has been reported by physico-chemical properties as density (ρ), viscosity (η), refractive index (nD) and ultrasonic speed (u) at 298.15 K. The extent of interaction (solute-solvent interaction) is expressed in terms of the limiting apparent molar volume (φ0V), viscosity B-coefficient, molar refraction (RM) and limiting apparent molar adiabatic compressibility (φ0K). The trends in transfer volumes, Δφ0V, have been interpreted in terms of solute-cosolute interactions on the basis of a co-sphere overlap model. The role of the cosolute (FA), and the contribution of solute-solute and solute-solvent interactions to the solution complexes, has also been analysed through the derived properties.

Loss of epithelial FAM20A in mice causes amelogenesis imperfecta, tooth eruption delay and gingival overgrowth

PubMed Central

Li, Li-Li; Liu, Pei-Hong; Xie, Xiao-Hua; Ma, Su; Liu, Chao; Chen, Li; Qin, Chun-Lin

2016-01-01

FAM20A has been studied to a very limited extent. Mutations in human FAM20A cause amelogenesis imperfecta, gingival fibromatosis and kidney problems. It would be desirable to systemically analyse the expression of FAM20A in dental tissues and to assess the pathological changes when this molecule is specifically nullified in individual tissues. Recently, we generated mice with a Fam20A-floxed allele containing the beta-galactosidase reporter gene. We analysed FAM20A expression in dental tissues using X-Gal staining, immunohistochemistry and in situ hybridization, which showed that the ameloblasts in the mouse mandibular first molar began to express FAM20A at 1 day after birth, and the reduced enamel epithelium in erupting molars expressed a significant level of FAM20A. By breeding K14-Cre mice with Fam20Aflox/flox mice, we created K14-Cre;Fam20Aflox/flox (conditional knock out, cKO) mice, in which Fam20A was inactivated in the epithelium. We analysed the dental tissues of cKO mice using X-ray radiography, histology and immunohistochemistry. The molar enamel matrix in cKO mice was much thinner than normal and was often separated from the dentinoenamel junction. The Fam20A-deficient ameloblasts were non-polarized and disorganized and were detached from the enamel matrix. The enamel abnormality in cKO mice was consistent with the diagnosis of amelogenesis imperfecta. The levels of enamelin and matrix metalloproteinase 20 were lower in the ameloblasts and enamel of cKO mice than the normal mice. The cKO mice had remarkable delays in the eruption of molars and hyperplasia of the gingival epithelium. The findings emphasize the essential roles of FAM20A in the development of dental and oral tissues. PMID:27281036

Loss of epithelial FAM20A in mice causes amelogenesis imperfecta, tooth eruption delay and gingival overgrowth.

PubMed

Li, Li-Li; Liu, Pei-Hong; Xie, Xiao-Hua; Ma, Su; Liu, Chao; Chen, Li; Qin, Chun-Lin

2016-06-30

FAM20A has been studied to a very limited extent. Mutations in human FAM20A cause amelogenesis imperfecta, gingival fibromatosis and kidney problems. It would be desirable to systemically analyse the expression of FAM20A in dental tissues and to assess the pathological changes when this molecule is specifically nullified in individual tissues. Recently, we generated mice with a Fam20A-floxed allele containing the beta-galactosidase reporter gene. We analysed FAM20A expression in dental tissues using X-Gal staining, immunohistochemistry and in situ hybridization, which showed that the ameloblasts in the mouse mandibular first molar began to express FAM20A at 1 day after birth, and the reduced enamel epithelium in erupting molars expressed a significant level of FAM20A. By breeding K14-Cre mice with Fam20A(flox/flox) mice, we created K14-Cre;Fam20A(flox/flox) (conditional knock out, cKO) mice, in which Fam20A was inactivated in the epithelium. We analysed the dental tissues of cKO mice using X-ray radiography, histology and immunohistochemistry. The molar enamel matrix in cKO mice was much thinner than normal and was often separated from the dentinoenamel junction. The Fam20A-deficient ameloblasts were non-polarized and disorganized and were detached from the enamel matrix. The enamel abnormality in cKO mice was consistent with the diagnosis of amelogenesis imperfecta. The levels of enamelin and matrix metalloproteinase 20 were lower in the ameloblasts and enamel of cKO mice than the normal mice. The cKO mice had remarkable delays in the eruption of molars and hyperplasia of the gingival epithelium. The findings emphasize the essential roles of FAM20A in the development of dental and oral tissues.

Predictability of orthodontic movement with orthodontic aligners: a retrospective study.

PubMed

Lombardo, Luca; Arreghini, Angela; Ramina, Fabio; Huanca Ghislanzoni, Luis T; Siciliani, Giuseppe

2017-11-13

The aim of this study was to evaluate the predictability of F22 aligners (Sweden & Martina, Due Carrare, Italy) in guiding teeth into the positions planned using digital orthodontic setup. Sixteen adult patients (6 males and 10 females, mean age 28 years 7 months) were selected, and a total of 345 teeth were analysed. Pre-treatment, ideal post-treatment-as planned on digital setup-and real post-treatment models were analysed using VAM software (Vectra, Canfield Scientific, Fairfield, NJ, USA). Prescribed and real rotation, mesiodistal tip and vestibulolingual tip were calculated for each tooth and, subsequently, analysed by tooth type (right and left upper and lower incisors, canines, premolars and molars) to identify the mean error and accuracy of each type of movement achieved with the aligner with respect to those planned using the setup. The mean predictability of movements achieved using F22 aligners was 73.6%. Mesiodistal tipping showed the most predictability, at 82.5% with respect to the ideal; this was followed by vestibulolingual tipping (72.9%) and finally rotation (66.8%). In particular, mesiodistal tip on the upper molars and lower premolars were achieved with the most predictability (93.4 and 96.7%, respectively), while rotation on the lower canines was the least efficaciously achieved (54.2%). Without the use of auxiliaries, orthodontic aligners are unable to achieve programmed movement with 100% predictability. In particular, although tipping movements were efficaciously achieved, especially at the molars and premolars, rotation of the lower canines was an extremely unpredictable movement.

Molar Macrowear Reveals Neanderthal Eco-Geographic Dietary Variation

PubMed Central

Fiorenza, Luca; Benazzi, Stefano; Tausch, Jeremy; Kullmer, Ottmar; Bromage, Timothy G.; Schrenk, Friedemann

2011-01-01

Neanderthal diets are reported to be based mainly on the consumption of large and medium sized herbivores, while the exploitation of other food types including plants has also been demonstrated. Though some studies conclude that early Homo sapiens were active hunters, the analyses of faunal assemblages, stone tool technologies and stable isotopic studies indicate that they exploited broader dietary resources than Neanderthals. Whereas previous studies assume taxon-specific dietary specializations, we suggest here that the diet of both Neanderthals and early Homo sapiens is determined by ecological conditions. We analyzed molar wear patterns using occlusal fingerprint analysis derived from optical 3D topometry. Molar macrowear accumulates during the lifespan of an individual and thus reflects diet over long periods. Neanderthal and early Homo sapiens maxillary molar macrowear indicates strong eco-geographic dietary variation independent of taxonomic affinities. Based on comparisons with modern hunter-gatherer populations with known diets, Neanderthals as well as early Homo sapiens show high dietary variability in Mediterranean evergreen habitats but a more restricted diet in upper latitude steppe/coniferous forest environments, suggesting a significant consumption of high protein meat resources. PMID:21445243

The evolutionary origin of jaw yaw in mammals

PubMed Central

Grossnickle, David M.

2017-01-01

Theria comprises all but three living mammalian genera and is one of the most ecologically pervasive clades on Earth. Yet, the origin and early history of therians and their close relatives (i.e., cladotherians) remains surprisingly enigmatic. A critical biological function that can be compared among early mammal groups is mastication. Morphometrics and modeling analyses of the jaws of Mesozoic mammals indicate that cladotherians evolved musculoskeletal anatomies that increase mechanical advantage during jaw rotation around a dorsoventrally-oriented axis (i.e., yaw) while decreasing the mechanical advantage of jaw rotation around a mediolaterally-oriented axis (i.e., pitch). These changes parallel molar transformations in early cladotherians that indicate their chewing cycles included significant transverse movement, likely produced via yaw rotation. Thus, I hypothesize that cladotherian molar morphologies and musculoskeletal jaw anatomies evolved concurrently with increased yaw rotation of the jaw during chewing cycles. The increased transverse movement resulting from yaw rotation may have been a crucial evolutionary prerequisite for the functionally versatile tribosphenic molar morphology, which underlies the molars of all therians and is retained by many extant clades. PMID:28322334

Preparation and characterization of magnesium borate for special glass

NASA Astrophysics Data System (ADS)

Dou, Lishuang; Zhong, Jianchu; Wang, Hongzhi

2010-05-01

Magnesium borate with a variety of B2O3/MgO molar ratios, which can be applied for special glass, has been prepared through the reaction of light-burned magnesia with boric acid by a hydrothermal method. The effects of the B2O3/MgO molar ratio of raw materials, reaction time, temperature and liquid to solid ratio (ml g-1) on the synthetic product are investigated. The XRD and TG-DTG analyses indicate that the prepared magnesium borate is a mixture of magnesium hexaborate hydrate and ascharite. The results show that high B2O3/MgO molar ratios of raw materials and low reaction liquid-solid ratios favour the product with a high B2O3/MgO molar ratio and vice versa. There exists free MgO in the product when the reaction temperature is below 140 °C or the reaction time is not enough, because of the incomplete reaction of magnesium oxide with boric acid. The process of fractional crystallization for the magnesium borate mixture is also discussed.

Age assessment based on third molar mineralisation : An epidemiological-radiological study on a Central-European population.

PubMed

Hofmann, Elisabeth; Robold, Matthias; Proff, Peter; Kirschneck, Christian

2017-03-01

The method published in 1973 by Demirjian et al. to assess age based on the mineralisation stage of permanent teeth is standard practice in forensic and orthodontic diagnostics. From age 14 onwards, however, this method is only applicable to third molars. No current epidemiological data on third molar mineralisation are available for Caucasian Central-Europeans. Thus, a method for assessing age in this population based on third molar mineralisation is presented, taking into account possible topographic and gender-specific differences. The study included 486 Caucasian Central-European orthodontic patients (9-24 years) with unaffected dental development. In an anonymized, randomized, and blinded manner, one orthopantomogram of each patient at either start, mid or end of treatment was visually analysed regarding the mineralisation stage of the third molars according to the method by Demirjian et al. Corresponding topographic and gender-specific point scores were determined and added to form a dental maturity score. Prediction equations for age assessment were derived by linear regression analysis with chronological age and checked for reliability within the study population. Mineralisation of the lower third molars was slower than mineralisation of the upper third molars, whereas no jaw-side-specific differences were detected. Gender-specific differences were relatively small, but girls reached mineralisation stage C earlier than boys, whereas boys showed an accelerated mineralisation between the ages of 15 and 16. The global equation generated by regression analysis (age = -1.103 + 0.268 × dental maturity score 18 + 28 + 38 + 48) is sufficiently accurate and reliable for clinical use. Age assessment only based on either maxilla or mandible also shows good prognostic reliability.

Radiographic morphology of intrabony defects in the first molars of patients with localized aggressive periodontitis: Comparison with health and chronic periodontitis.

PubMed

Nibali, L; Tomlins, P; Akcalı, A

2018-04-16

The aim of this study was to describe the radiographic features of the first molars of patients with localized aggressive periodontitis (LAgP) and of their associated intrabony defects and to compare them with a control sample of chronic periodontitis cases and healthy subjects. Data from a total of 93 patients were included in this analysis. First, dental panoramic tomograms of 34 patients with LAgP (131 first molars) and 30 periodontally healthy patients (110 first molars) were compared. Then, periapical radiographs of the first molars of the same patients with LAgP and of 29 patients with chronic periodontitis affected by intrabony defects were analysed. Shorter root trunks were associated with the presence of intrabony defects in patients with LAgP (P = .002 at multilevel logistic regression), also when LAgP molars were compared with healthy subjects (P = .036). Although no difference in defect depth and angle was noted between LAgP and chronic periodontitis intrabony defects, LAgP intrabony defects appeared to be more frequently symmetrical and arch-shaped than in chronic periodontitis (P = .008), with positive predictive value and negative predictive value of for 'wide arch' defect of 87.3% (95% CI = 77.2%-93.3%) and 32.3% (95% CI = 27.7%-37.2%) respectively. First molars of patients with LAgP affected by intrabony defects may have some distinct radiographic anatomical characteristics to those of healthy subjects. The shape of intrabony defects seems to differ between LAgP and chronic periodontitis cases. Further studies need to confirm these features and investigate if they are related to the initiation and progression of periodontitis. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Evaluation of Four Pulpotomy Techniques in Primary Molars: A Randomized Controlled Trial

PubMed Central

Ansari, Ghassem; Morovati, Seyyedeh Pouya; Asgary, Saeed

2018-01-01

Introduction: This trial was designed to evaluate the clinical and radiographic success rates of calcium-enriched mixture (CEM) cement with and without low level laser therapy (LLLT) and compare them to that of formocresol (FC) and ferric sulfate (FS) in primary molar pulpotomies. Methods and Materials: This randomized clinical trial was conducted on a total of 160 teeth selected from 40 patients aged 3-9 years. Patients with at least four primary molars needing pulpotomy, were included in order to have each tooth assigned randomly in one of the four following groups; FC, FS, CEM, and LLLT/CEM. Six- and twelve-month follow-up periods were conducted in order to enable a clinical and radiographic evaluation of the treated teeth. Collected data were analyzed using Cochran Q Tests. Results: The 12-month clinical success rate for each technique was: FC=100%, FS=95%, CEM=97.5% and LLLT/CEM=100% with no significant differences (P>0.05). Furthermore, 12-month radiographic success rate for each technique was: FC=100%, FS=92.5%, CEM=95% and LLLT/CEM=100% with no significant differences (P>0.05). Conclusion: Favorable outcomes of four treatment techniques in pulpotomy of primary molar teeth were comparable. CEM with/without LLLT may be considered as a safe and successful pulpotomy treatment modality compared to current conventional methods. PMID:29692828

The effect of mechanical vibration on orthodontically induced root resorption.

PubMed

Yadav, Sumit; Dobie, Thomas; Assefnia, Amir; Kalajzic, Zana; Nanda, Ravindra

2016-09-01

To investigate the effect of low-frequency mechanical vibration (LFMV) on orthodontically induced root resorption. Forty male CD1, 12-week-old mice were used for the study. The mice were randomly divided into five groups: group 1 (baseline)-no spring and no mechanical vibration, group 2-orthodontic spring but no vibration, group 3-orthodontic spring and 5 Hz of vibration applied to the maxillary first molar, group 4-orthodontic spring and 10 Hz of vibration applied to maxillary first molar, and group 5-orthodontic spring and 20 Hz of vibration applied to maxillary first molar. In the different experimental groups, the first molar was moved mesially for 2 weeks using a nickel-titanium coil spring delivering 10 g of force. LFMVs were applied at 5 Hz, 10 Hz, and 20 Hz. Microfocus X-ray computed tomography imaging was used to analyze root resorption. Additionally, to understand the mechanism, we applied LFMV to MC3T3 cells, and gene expression analyses were done for receptor activator of nuclear factor kappa-B ligand (RANKL) and osteoprotegerin (OPG). Orthodontic tooth movement leads to decreased root volume (increased root resorption craters). Our in vivo experiments showed a trend toward increase in root volume with different frequencies of mechanical vibration. In vitro gene expression analyses showed that with 20 Hz of mechanical vibration, there was a significant decrease in RANKL and a significant increase in OPG expression. There was a trend toward decreased root resorption with different LFMVs (5 Hz, 10 Hz, and 20 Hz); however, it was not more statistically significant than the orthodontic-spring-only group.

Factors Predisposing to Maxillary Anchorage Loss: A Retrospective Study of 1403 Cases

PubMed Central

Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

2014-01-01

Anchorage loss is very disturbing for orthodontists and patients during orthodontic treatment, which usually results in bad treatment effects. Despite the same treatment strategy, different patients show different tendencies toward anchorage loss, which influences the treatment results and should preferably be predicted before the treatment is begun. However, relatively little research has been conducted on which patients are more likely to lose anchorage. The mesial tipping of the first molar marks the onset of anchorage loss, and changes in the angulation of the first molar are closely related to anchorage loss. This cross-sectional study aimed to determine how the mesiodistal angulation of the upper first molars changes during general orthodontic treatment and to identify the individual physiologic factors leading to these changes in a large sample of 1403 patients with malocclusion. The data indicate that the upper first molars tend to be tipped mesially during orthodontic treatment, and this constitutes a type of anchorage loss that orthodontists should consider carefully. Compared to treatment-related factors, patients' physiologic characteristics have a greater influence on changes in the angulation of the upper first molars during orthodontic treatment. The more distally tipped the upper first molars are before treatment, the more they will tip mesially during treatment. Mesial tipping of the upper first molars, and therefore, anchorage loss, is more likely to occur in adolescents, males, patients with class II malocclusion and patients who have undergone maxillary premolar extraction. This finding is of clinical significance to orthodontists who wish to prevent iatrogenic anchorage loss by tipping originally distally tipped upper molars forward, and provides a new perspective on anchorage during orthodontic treatment planning. PMID:25299164

Factors predisposing to maxillary anchorage loss: a retrospective study of 1403 cases.

PubMed

Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

2014-01-01

Anchorage loss is very disturbing for orthodontists and patients during orthodontic treatment, which usually results in bad treatment effects. Despite the same treatment strategy, different patients show different tendencies toward anchorage loss, which influences the treatment results and should preferably be predicted before the treatment is begun. However, relatively little research has been conducted on which patients are more likely to lose anchorage. The mesial tipping of the first molar marks the onset of anchorage loss, and changes in the angulation of the first molar are closely related to anchorage loss. This cross-sectional study aimed to determine how the mesiodistal angulation of the upper first molars changes during general orthodontic treatment and to identify the individual physiologic factors leading to these changes in a large sample of 1403 patients with malocclusion. The data indicate that the upper first molars tend to be tipped mesially during orthodontic treatment, and this constitutes a type of anchorage loss that orthodontists should consider carefully. Compared to treatment-related factors, patients' physiologic characteristics have a greater influence on changes in the angulation of the upper first molars during orthodontic treatment. The more distally tipped the upper first molars are before treatment, the more they will tip mesially during treatment. Mesial tipping of the upper first molars, and therefore, anchorage loss, is more likely to occur in adolescents, males, patients with class II malocclusion and patients who have undergone maxillary premolar extraction. This finding is of clinical significance to orthodontists who wish to prevent iatrogenic anchorage loss by tipping originally distally tipped upper molars forward, and provides a new perspective on anchorage during orthodontic treatment planning.

Compliance as a prognostic indicator. II. Impact of patient's compliance to the individual tooth survival.

PubMed

Miyamoto, Takanari; Kumagai, Takashi; Lang, Melissa S; Nunn, Martha E

2010-09-01

Existing evidence concerning the validity of an appropriate regular periodontal maintenance (PM) regimen and the role of patient compliance is controversial and inconsistent. The objectives of this study are to identify the impact of patient compliance (complete versus erratic) on alveolar bone loss and tooth survival. A retrospective study was conducted using data from 295 patients with >or=20 years of observation, which included treatment and >or=15 years of maintenance therapy, in a private practice in Yamagata, Japan. Subject-level variables and tooth-level variables were recorded at the initial visit, the reevaluation visit, and the final visit. In total, 7,502 teeth in 295 subjects met inclusion criteria and were divided into two groups: non-molar teeth (n = 5,585) and molar teeth (n = 1,917). A tooth-level multivariate survival model and multiple logistic regression model using the method of generalized estimating equations were constructed to analyze the effects of compliance and periodontal maintenance intervals on tooth loss and alveolar bone loss, respectively. Of 7,502 teeth, 284 molar teeth and 364 non-molar teeth were lost. Molar teeth had an approximately 30% reduction in risk of tooth loss for complete compliance, with 2-year compliance classification achieving statistical significance (P = 0.033), and 30% compliance classification approaching statistical significance (P = 0.072). Complete compliers under 30% compliance classification showed over 50% reduction in the risk of alveolar bone loss among non-molars (P = 0.015). Complete patient compliance with increased frequency of periodontal maintenance is important for improved dental prognosis through reduction of tooth loss among molars and minimization of alveolar bone loss among non-molars.

Evaluation of the cytotoxicity of selected conventional glass ionomer cements on human gingival fibroblasts.

PubMed

Marczuk-Kolada, Grażyna; Łuczaj-Cepowicz, Elżbieta; Pawińska, Małgorzata; Hołownia, Adam

2017-10-01

Dentistry materials are the most frequently used substitutes of human tissues. Therefore, an assessment of dental filling materials should cover not only their chemical, physical, and mechanical characteristics, but also their cytotoxicity. To compare the cytotoxic effects of 13 conventional glass ionomer cements on human gingival fibroblasts. The assessment was conducted using the MTT test. Six samples were prepared for each material. Culture plates with cells and inserts with the materials were incubated at 37°C, 5% CO2, and 95% humidity for 24 h. Then the inserts were removed, 1 mL of MTT was added in the amount of 0.5 mg/1 mL of the medium, and the samples were incubated in the described conditions without light for 2 h. The optical density was measured with an absorption spectrophotometer at a wavelength of 560 nm. The cytotoxic effects of the Argion Molar was significantly stronger than the Fuji Triage (p = 0.007), Chemfil Molar (p < 0.0001), and Ionofil Molar AC Quick (p < 0.001). The Fuji IX GP and Fuji IX Extra had a significantly stronger adverse effect than the Chemfil Molar (p = 0.014, p = 0.029, respectively) and Ionofil Molar AC Quick (p = 0.017, p = 0.034, respectively). The cements from the low cytotoxicity group were significantly more toxic vs materials whose presence resulted in fibroblast growth (p < 0.001). The research conducted indicates that, although the materials studied may belong to the same group, they are characterized by low, yet not uniform, cytotoxicity on human gingival fibroblasts. The toxic effects should not be assigned to a relevant group of materials, but each dentistry product should be evaluated individually.

Canal Configuration of Mesiobuccal Roots in Permanent Maxillary First Molars in Iranian Population: A Systematic Review

PubMed Central

Naseri, Mandana; Kharazifard, Mohammad Javad

2016-01-01

Objectives: It is essential for clinicians to have adequate knowledge about root canal configurations; although its morphology varies largely in different ethnicities and even in different individuals with the same ethnic background. The current study aims to review the root canal configurations of mesiobuccal roots of maxillary first molars in an Iranian population based on different epidemiological studies. Materials and Methods: A comprehensive search was conducted to retrieve articles related to root canal configuration and prevalence of each type of root canal based on Vertucci’s classification for the mesiobuccal root of maxillary first molars. An electronic search was conducted in Medline, Scopus and Google Scholar from January 1984 to September 2015. The articles were evaluated and methods, population, number of teeth and percentage of each root canal type evaluated in each study were summarized in the data table. Websites such as http://www.magiran.com/ , http://health.barakatkns.com/journal-internal-list and www.sid.ir were used to search all related studies published in Persian. Results: Totally, out of nine studies conducted on the Iranian populations in nine provinces of Iran and 798 teeth, the Vertucci’s type I was the most common type (35.70%), followed by type II (30.37%), type IV (16.66%), type III (7.93%) and type V (2.61%). Conclusions: From this review article, it is concluded that the root canal morphology of mesiobuccal roots of maxillary first molars in the Iranian population predominantly has more than one canal. Therefore, careful evaluation of radiographs and anatomy of the pulp chamber is essential in order to achieve a successful root canal therapy. PMID:28243306

Prevalence of Taurodont Molars in a Selected Iranian Adult Population

PubMed Central

Jamshidi, Davoud; Tofangchiha, Maryam; Jafari Pozve, Nasim; Mohammadpour, Mahdis; Nouri, Bijan; Hosseinzadeh, Kazem

2017-01-01

Introduction: Taurodontism is an anomaly characterized by elongated crowns and consumedly apical location of the bifurcation area. This study aimed to determine the prevalence of taurodontism in molars based on digital panoramic radiographies in eight cities of Iran. Methods and Materials: This descriptive cross-sectional study was conducted on 2360 digital panoramic radiographs taken for different treatment purposes. Demographic information of patients was recorded and radiographs were evaluated for presence of taurodont molars. The prevalence rates were calculated and the data were analyzed using SPSS software version 18 via paired t-test, chi square test and ANOVA. Results: A total of 2360 panoramic radiographs (from 51.4% male and 48.6% female patients) were evaluated and the prevalence of taurodontism was reported 22.9% (22.6% in males and 23.3% in females) (P>0.05). Its prevalence was 51.67% in the right and 48.33% in the left quadrants (P>0.05), 34.1% in the mandible and 65.9% in the maxilla (P=0.000) and 79.52% in the second and 20.48% in the first molar (P=0.000). The prevalence of hypotaurodontism, mesotaurodontism and hypertaurodontism was 84.13%, 11.07% and 4.8%, respectively. Conclusion: The prevalence of taurodont molars was high in Iran and it was more common in the second molars and in the maxilla. Hypotaurodontism had the highest prevalence. PMID:28808451

The Efficacy of a Repeated Buccal Infiltration of Articaine in Prolonging Duration of Pulpal Anesthesia in the Mandibular First Molar

PubMed Central

Pabst, Lindsay; Nusstein, John; Drum, Melissa; Reader, Al; Beck, Mike

2009-01-01

Previous studies have shown declining rates of pulpal anesthesia over 60 minutes when a cartridge of 4% articaine is used with 1∶100,000 epinephrine for buccal infiltration in the mandibular first molar. The authors conducted a prospective, randomized, single-blind, crossover study comparing the degree of pulpal anesthesia obtained with 2 sets of mandibular first molar buccal infiltrations, given in 2 separate appointments, to 86 adult subjects: an initial infiltration of a cartridge of 4% articaine with 1∶100,000 epinephrine plus a repeated infiltration of the same anesthetic and dose given 25 minutes following the initial infiltration versus an initial infiltration of a cartridge of 4% articaine with 1∶100,000 epinephrine plus a mock repeated infiltration given 25 minutes following the initial infiltration. The authors used an electric pulp tester to test the first molar for anesthesia in 3-minute cycles for 112 minutes after the injections. The repeated infiltration significantly improved pulpal anesthesia from 28 minutes through 109 minutes in the mandibular first molar. A repeated infiltration of a cartridge of 4% articaine with 1∶100,000 epinephrine given 25 minutes after an initial infiltration of the same type and dose of anesthetic significantly improved the duration of pulpal anesthesia, when compared with only an initial buccal infiltration, in the mandibular first molar. PMID:20020793

Influence of orthodontic treatment with first premolar extraction on the angulation of the mandibular third molar.

PubMed

Al Kuwari, Huda M; Talakey, Arwa A; Al-Sahli, Reem M; Albadr, Anisa H

2013-06-01

To evaluate the influence of orthodontic treatment that involved first premolars extraction on the angulation of the developing mandibular third molars, and whether this will result in an improvement in it's path of eruption during tooth development. A cross-sectional radiographic study was conducted using 80 panoramic radiographs of 40 orthodontic patients previously treated at the College of Dentistry, King Saud University, Riyadh, Kingdom of Saudi Arabia. The sample consisted of 2 groups, extraction and non-extraction orthodontic therapy group with equal number of patients in each group. The orthodontic treatment of the extraction group involved the extraction of first premolars, whilst non-extraction group had received orthodontic therapy without teeth extraction. The angulation of the right and left third mandibular molars was measured in each patient separately, and the data was analyzed using the non-parametric Mann-Whitney Test. The present data has shown significant improvement in the third molars angulation in the extraction orthodontic therapy group compared to non-extraction group, Although this finding was significant in both genders, females tend to show better response in the improvement of third molar angulation to extraction therapy than males (p=0.001, p=0.006). Orthodontic treatment with first premolars extraction has improved the third molars angulation during their course of eruptions and consequently supports the decision of the orthodontic extraction therapy approach in borderline cases.

Hydrophobicity of silica thin films: The deconvolution and interpretation by Fourier-transform infrared spectroscopy

NASA Astrophysics Data System (ADS)

Saputra, Riza Eka; Astuti, Yayuk; Darmawan, Adi

2018-06-01

This work investigated the synthesis of dimethoxydimethylsilane:tetraethoxysilane (DMDMS:TEOS) silica thin films as well as the effect of DMDMS:TEOS molar ratios and calcination temperature on hydrophobic properties of silica thin films and its correlation with the FTIR spectra behaviour. The silica thin films were synthesized by sol-gel method using combination of DMDMS and TEOS as silica precursors, ethanol as solvent and ammonia as catalyst, with DMDMS and TEOS molar ratio of 10:90, 25:75, 50:50, 75:25 and 90:10. The results showed that DMDMS:TEOS molar ratio had significant impact on the hydrophobic properties of silica thin films coated on a glass surface. Furthermore, the correlation between water contact angle (WCA) and DMDMS:TEOS molar ratio was found to be in a parabolic shape. Concurrently, the maximum apex of the parabola obtained was observed on the DMDMS:TEOS molar ratio of 50:50 for all calcination temperature. It was clearly observed that the silica xerogel exhibiting notable change in relative peak intensities showed FTIR peak splitting of υasymmetric Si-O-Si. To uncover what happened at the FTIR peak, the deconvolution was conducted in Gaussian approach. It was established that the changes in the Gaussian peak component were related to DMDMS:TEOS molar ratios and the calcination temperature that allowed us to tailor the DMDMS:TEOS silica polymer structure model based on the peak intensity ratios. With the increase of DMDMS:TEOS molar ratio, the ratio of (cyclic Si-O-Si)/(linear Si-O-Si) decreased, whilst the ratio of (C-H)/(linear Si-O-Si) increased. Both ratios intersected at DMDMS:TEOS molar ratio of 50:50 with contribution factor ratio of 1:16 and 1:50 for silica xerogel calcined at 300 °C and 500 °C respectively. The importance of this research is the DMDMS:TEOS molar ratio plays an important role in determining the hydrophobic properties of thin films.

Biogeography and molar morphology of Pleistocene African elephants: new evidence from Elandsfontein, Western Cape Province, South Africa

NASA Astrophysics Data System (ADS)

Smith, Kathlyn M.; Stynder, Deano D.

2015-05-01

Elandsfontein (EFT) is a Middle Pleistocene archaeological/paleontological site located in the Western Cape Province of South Africa. The largest herbivore in the assemblage is Loxodonta atlantica zulu, an extinct member of the genus that includes modern African elephants. No Elephas recki specimens were recovered at EFT, despite their common occurrence in other regions of Africa at the same time. Because E. recki and L. atlantica molars are similar in appearance, but the two species are traditionally viewed as dominating different regions of Africa during the Pleistocene, isolated molars may on occasions have been assessed to species level on the basis of geography rather than morphology. The last morphologic evaluation of EFT elephants was conducted in the 1970s, and revisiting this issue with new specimens provides added insight into the evolution of elephants in Africa. Reevaluating morphological characteristics of EFT elephant molars, through qualitative and quantitative description and comparison with Middle Pleistocene E. recki recki, L. atlantica atlantica, and L. atlantica zulu molar morphology, corroborates assessment of EFT elephants as L. a. zulu. Two recently discovered, previously undescribed molars from EFT show that molars of L. a. zulu exhibit greater variation in enamel thickness, lamellar frequency, and occlusal surface morphology than previously reported. An update of the Pleistocene biogeography of Loxodonta and Elephas indicates that fossil remains of both are often found at the same localities in eastern Africa. Their rare co-occurrences in the north and south, however, suggest geographic separation of the two genera in at least some regions of Africa, which may have been based on habitat preference.

Anesthetic efficacy of 1.8 mL versus 3.6 mL of 4% articaine with 1:100,000 epinephrine as a primary buccal infiltration of the mandibular first molar.

PubMed

Martin, Matthew; Nusstein, John; Drum, Melissa; Reader, Al; Beck, Mike

2011-05-01

No study has compared 1.8 mL and 3.6 mL 4% articaine with 1:100,000 epinephrine in a mandibular buccal infiltration of the first molar. The authors conducted a prospective, randomized, single-blind, crossover study comparing the degree of pulpal anesthesia obtained with 1.8 mL and 3.6 mL 4% articaine with 1:100,000 epinephrine as a primary infiltration in the mandibular first molar. Eighty-six asymptomatic adult subjects randomly received a primary mandibular buccal first molar infiltration of 1.8 mL or 3.6 mL 4% articaine with 1:100,000 epinephrine in two separate appointments. The authors used an electric pulp tester to test the first molar for anesthesia in 3-minute cycles for 90 minutes after the injections. Compared with the 1.8-mL volume of 4% articaine with 1:100,000 epinephrine, the 3.6-mL volume showed a statistically higher success rate (70% vs 50%). The anesthetic efficacy of 3.6 mL 4% articaine with 1:100,000 epinephrine is better than 1.8 mL of the same anesthetic solution in a primary mandibular buccal infiltration of the first molar. However, the success rate of 70% is not high enough to support its use as a primary injection technique in the mandibular first molar. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Dental morphology and the phylogenetic "place" of Australopithecus sediba.

PubMed

Irish, Joel D; Guatelli-Steinberg, Debbie; Legge, Scott S; de Ruiter, Darryl J; Berger, Lee R

2013-04-12

To characterize further the Australopithecus sediba hypodigm, we describe 22 dental traits in specimens MH1 and MH2. Like other skeletal elements, the teeth present a mosaic of primitive and derived features. The new nonmetric data are then qualitatively and phenetically compared with those in eight other African hominin samples, before cladistic analyses using a gorilla outgroup. There is some distinction, largely driven by contrasting molar traits, from East African australopiths. However, Au. sediba links with Au. africanus to form a South African australopith clade. These species present five apomorphies, including shared expressions of Carabelli's upper first molar (UM1) and protostylid lower first molar (LM1). Five synapomorphies are also evident between them and monophyletic Homo habilis/rudolfensis + H. erectus. Finally, a South African australopith + Homo clade is supported by four shared derived states, including identical LM1 cusp 7 expression.

Molar loss and powder diet leads to memory deficit and modifies the mRNA expression of brain-derived neurotrophic factor in the hippocampus of adult mice.

PubMed

Takeda, Yosuke; Oue, Hiroshi; Okada, Shinsuke; Kawano, Akira; Koretake, Katsunori; Michikawa, Makoto; Akagawa, Yasumasa; Tsuga, Kazuhiro

2016-12-05

It is known that tooth loss is known to be a risk factor for Alzheimer's disease and soft diet feeding induces memory impairment. Recent studies have shown that brain-derived neurotrophic factor (BDNF) is associated with tooth loss or soft diet in young animal model, and that BDNF expression is decreased in patients with Alzheimer's disease. However, single or combined effect of tooth loss and/or soft diet on brain function has not fully understood. Here we examined the effect of molar loss and powder diet on memory ability and the expression of BDNF mRNA in the hippocampus of adult C57BL/6J mice. Twenty eight-weeks-old C57BL/6J mice were divided into intact molar group and extracted molar group. They were randomly divided into the I/S group (Intact upper molar teeth/Solid diet feeding), the E/S group (Extracted upper molar teeth/Solid diet feeding), the I/P group (Intact upper molar teeth/Powder diet feeding), and the E/P group (Extracted upper molar teeth/Powder diet feeding). The observation periods were 4 and 16-week. To analyze the memory ability, the step-through passive avoidance test was conducted. BDNF-related mRNA in the hippocampus was analyzed by real-time polymerase chain reaction (RT-PCR). At 4 weeks later, we performed memory test and isolated brains to analyze. There were no differences in memory function and BDNF mRNA level between these four groups. However, at 16 weeks later, E/S and E/P group showed memory impairment, and decreased level of BDNF mRNA. Whereas, the powder diet had no effect on memory function and BDNF mRNA level even at 16 weeks later. These results suggest that the effect of molar loss and powder diet on memory function and BDNF mRNA levels were different, molar loss may have a greater long-term effect on memory ability than powder diet does.

Are hypomineralised lesions on second primary molars (HSPM) a predictive sign of molar incisor hypomineralisation (MIH)? A systematic review and a meta-analysis.

PubMed

Garot, Elsa; Denis, Alice; Delbos, Yves; Manton, David; Silva, Mihiri; Rouas, Patrick

2018-05-01

Molar Incisor Hypomineralisation (MIH) and Hypomineralised Second Primary Molars (HSPM) involve qualitative structural developmental anomalies of tooth enamel affecting the first permanent molars (and often incisors) and the second primary molars, respectively. A putative relationship between HSPM and MIH has been reported in the scientific literature. The aim was to determine whether children with HSPM are more likely to develop MIH. A systematic search using PubMed/Medline, Embase and Cochrane Library electronic databases for publications from 2001 to August 2017 investigating the link between MIH and HSPM was undertaken. Four reviewers selected the studies independently, extracted the data according to PRISMA statement, and assessed the bias risk with the Newcastle-Ottawa Scale (NOS) criteria. From 645 potentially eligible studies, 14 were selected for full text analysis and 5 were included in the meta-analysis. Cross-sectional and cohort studies were reported and 4662 participants were included. The meta-analyses were performed with a random model calculated an OR total of 4.66 (95% CI 2.11-10.26; P < 0.001). The weighted mean of the co-occurrence of HSPM and MIH prevalence was 19.94%. The high heterogeneity (I 2  = 88%) can be explained by the great variation present in number of participants and variable caries risk. Despite the limitations of the study, the presence of HSPM is predictive for MIH, with greater MIH prevalence in the presence of mild HSPM. Early detection and preventive intervention could reduce MIH complications. Copyright © 2018 Elsevier Ltd. All rights reserved.

Mechanical constraint from growing jaw facilitates mammalian dental diversity

PubMed Central

Renvoisé, Elodie; Kavanagh, Kathryn D.; Lazzari, Vincent; Häkkinen, Teemu J.; Rice, Ritva; Pantalacci, Sophie; Salazar-Ciudad, Isaac; Jernvall, Jukka

2017-01-01

Much of the basic information about individual organ development comes from studies using model species. Whereas conservation of gene regulatory networks across higher taxa supports generalizations made from a limited number of species, generality of mechanistic inferences remains to be tested in tissue culture systems. Here, using mammalian tooth explants cultured in isolation, we investigate self-regulation of patterning by comparing developing molars of the mouse, the model species of mammalian research, and the bank vole. A distinct patterning difference between the vole and the mouse molars is the alternate cusp offset present in the vole. Analyses of both species using 3D reconstructions of developing molars and jaws, computational modeling of cusp patterning, and tooth explants cultured with small braces show that correct cusp offset requires constraints on the lateral expansion of the developing tooth. Vole molars cultured without the braces lose their cusp offset, and mouse molars cultured with the braces develop a cusp offset. Our results suggest that cusp offset, which changes frequently in mammalian evolution, is more dependent on the 3D support of the developing jaw than other aspects of tooth shape. This jaw–tooth integration of a specific aspect of the tooth phenotype indicates that organs may outsource specific aspects of their morphology to be regulated by adjacent body parts or organs. Comparative studies of morphologically different species are needed to infer the principles of organogenesis. PMID:28808032

Relationships between oral morphology and feeding style in the Ungulata: a phylogenetically controlled evaluation.

PubMed

Pérez-Barbería, F J; Gordon, I J

2001-05-22

In ungulates it is argued that specialization in the consumption of a particular type of food (feeding style) is reflected in morphological adaptations of the organs involved in the selection, processing and digestion of food. We analysed the differences in size and morphology of some oral traits that have been functionally related to food-selection ability (muzzle width, incisor-arcade shape, incisor shape), prehension of food (incisor protrusion), food comminution (molar occlusal surface area, hypsodonty (high-crowned molars)) and intake rate (incisor breadth) between ungulate species with different feeding styles (browser, mixed feeder, grazer). Grazers were characterized by large-body-size species. After controlling only for body mass, we found that grazers had wider muzzles and incisors, more-protruding incisors and more-bulky and higher-crowned molars than did mixed feeders and browsers. When the analyses took into account both body mass and phylogeny, only body mass and two out of the three hypsodonty indexes used remained significantly different between feeding styles. Browsers were smaller, on average, than mixed feeders and grazers, whilst grazers and mixed feeders did not differ in size. Also, browsers had shorter and less-bulky molars than did mixed feeders and grazers; the latter two feeding styles did not differ from each other in any of the hypsodonty indexes. We conclude that the adaptation to different dietary types in most of the oral traits studied is subsumed by the effects of body mass and the sharing of common ancestors. We hypothesize that differences in the ability to exploit different food resources primarily result from differences in body mass between species, and also discuss why hypsodonty characterizes feeding styles.

Relationships between oral morphology and feeding style in the Ungulata: a phylogenetically controlled evaluation.

PubMed Central

Pérez-Barbería, F. J.; Gordon, I. J.

2001-01-01

In ungulates it is argued that specialization in the consumption of a particular type of food (feeding style) is reflected in morphological adaptations of the organs involved in the selection, processing and digestion of food. We analysed the differences in size and morphology of some oral traits that have been functionally related to food-selection ability (muzzle width, incisor-arcade shape, incisor shape), prehension of food (incisor protrusion), food comminution (molar occlusal surface area, hypsodonty (high-crowned molars)) and intake rate (incisor breadth) between ungulate species with different feeding styles (browser, mixed feeder, grazer). Grazers were characterized by large-body-size species. After controlling only for body mass, we found that grazers had wider muzzles and incisors, more-protruding incisors and more-bulky and higher-crowned molars than did mixed feeders and browsers. When the analyses took into account both body mass and phylogeny, only body mass and two out of the three hypsodonty indexes used remained significantly different between feeding styles. Browsers were smaller, on average, than mixed feeders and grazers, whilst grazers and mixed feeders did not differ in size. Also, browsers had shorter and less-bulky molars than did mixed feeders and grazers; the latter two feeding styles did not differ from each other in any of the hypsodonty indexes. We conclude that the adaptation to different dietary types in most of the oral traits studied is subsumed by the effects of body mass and the sharing of common ancestors. We hypothesize that differences in the ability to exploit different food resources primarily result from differences in body mass between species, and also discuss why hypsodonty characterizes feeding styles. PMID:11375086

Enamel microarchitecture of a tribosphenic molar.

PubMed

Spoutil, Frantisek; Vlcek, Vojtĕch; Horácek, Ivan

2010-10-01

The tribosphenic molar is a dental apomorphy of mammals and the molar type from which all derived types originated. Its enamel coat is expected to be ancestral: a thin, evenly distributed layer of radial prismatic enamel. In the bat Myotis myotis, we reinvestigated the 3D architecture of the dental enamel using serial sectioning combined with scanning electron microscopy analyses, biometrics of enamel prisms and crystallites, and X-ray diffraction. We found distinct heterotopies in enamel thickness (thick enamel on the convex sides of the crests, thin on the concave ones), angularity of enamel prisms, and in distribution of particular enamel types (prismatic, interprismatic, aprismatic) and demonstrated structural relations of these heterotopies to the cusp and crest organization of the tribosphenic molar. X-ray diffraction demonstrated that the crystallites composing the enamel are actually the aggregates of much smaller primary crystallites. The differences among particular enamel types in degree of crystallite aggregation and the variation in structural microstrain of the primary crystallites (depending upon the duration and the mechanical context of mineralization) represent factors not fully understood as yet that may contribute to the complexity of enamel microarchitecture in a significant way. © 2010 Wiley-Liss, Inc.

Effect of air abrasion and polishing on primary molar fissures.

PubMed

Lenzi, T L; Menezes, L B R; Soares, F Z M; Rocha, R O

2013-04-01

To evaluate the effect of air abrasion and polishing on primary molar fissures under light microscopy. 15 exfoliated primary second molars were longitudinally sectioned and photographed under a stereomicroscope (40×; baseline evaluation). Sections were then randomly allocated into one of the two groups (n = 15) and treated by either air abrasion (aluminium oxide jet) or air polishing (sodium bicarbonate jet) for 30 s. After treatment, sections were washed with an air/water spray, dried with absorbent paper, and photographed as previously described (final evaluation). Baseline and final morphology were compared by two blinded examiners who evaluated changes in the width and depth of fissures. The percentage of changed fissures was analysed, and the two treatments were compared using the Mann-Whitney test (α = 0.01). Both air systems resulted in fissure changes in most (93.3 %) of the sections. No significant differences in fissure width changes were found between treatments, but when changes in fissure depth were evaluated, air polishing was found to be less damaging than air abrasion (p < 0.01). Air abrasion and polishing cause changes to the anatomical configuration of occlusal fissures of primary molars.

Interrelationships in the Variability of Root Canal Anatomy among the Permanent Teeth: A Full-Mouth Approach by Cone-Beam CT

PubMed Central

Peters, Ove A.; Maury, Elisabeth; Telmon, Norbert; Georgelin-Gurgel, Marie; Maret, Delphine

2016-01-01

Objectives In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The aim of this study was to assess using CBCT acquisitions regarding whether one root canal anatomy of a tooth is associated with a specific anatomy of another tooth. Methods A total of 106 CBCT acquisitions were obtained using a CBCT scanner with 200μm voxel size. Numbers of roots and canals of the entire dentition were described. Bivariate analyses and logistic regressions were conducted to explore root canal anatomy on one tooth according to age, gender, jaw, side and the others teeth. Multiple correspondence analysis (MCA) was performed to correlate the different numbers of canals profiles. Results A total of 2424 teeth were analyzed. Independently from the other variables, the presence of an additional root canal on a mandibular incisor increases the risk of having an additional root canal on a mandibular premolar (OR [95%] 3.7 [1.0;13.2]). The mandibular molar variability increases in women compared to men (OR [95%] 0.4 [0.1; 0.9]). MCA showed correspondence between 2-canals maxillary incisor and canines and 5-canals maxillary molars, and some correlation between additional canal on maxillary and mandibular premolars. Conclusions Although CBCT examinations are conducted in the first intention of making a diagnosis or prognostic evaluation, medium FOV acquisitions could be used as an initial database thus furnishing preliminary evaluations and information. In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The visualization of all canals is considered essential in endodontic therapy. The use of multi-correspondence analysis for statistics in endodontic research is a new approach as a prognostic tool. PMID:27764246

Hypomineralized Second Primary Molars as Predictor of Molar Incisor Hypomineralization

PubMed Central

Negre-Barber, A.; Montiel-Company, J. M.; Boronat-Catalá, M.; Catalá-Pizarro, M.; Almerich-Silla, J. M.

2016-01-01

Molar incisor hypomineralization (MIH) is a developmental defect of dental enamel that shares features with hypomineralized second primary molars (HSPM). Prior to permanent tooth eruption, second primary molars could have predictive value for permanent molar and incisor hypomineralization. To assess this possible relationship, a cross-sectional study was conducted in a sample of 414 children aged 8 and 9 years from the INMA cohort in Valencia (Spain). A calibrated examiner (linear-weighted Kappa 0.83) performed the intraoral examinations at the University of Valencia between November 2013 and 2014, applying the diagnostic criteria for MIH and HSPM adopted by the European Academy of Paediatric Dentistry. 100 children (24.2%) presented MIH and 60 (14.5%) presented HSPM. Co-occurrence of the two defects was observed in 11.1% of the children examined. The positive predictive value was 76.7% (63.9–86.6) and the negative predictive value 84.7% (80.6–88.3). The positive likelihood ratio (S/1-E) was 10.3 (5.9–17.9) and the negative likelihood ratio (1-S/E) 0.57 (0.47–0.68). The odds ratio was 18.2 (9.39–35.48). It was concluded that while the presence of HSPM can be considered a predictor of MIH, indicating the need for monitoring and control, the absence of this defect in primary dentition does not rule out the appearance of MIH. PMID:27558479

Anaesthesia Techniques for Maxillary Molars – A Questionnaire-Based Retrospective Field Survey of Dentist in Western India

PubMed Central

Mittal, Priya

2016-01-01

Introduction Clinicians use various anaesthesia techniques like Posterior Superior Alveolar (PSA) nerve block, buccal infiltration with or without supplemental anaesthesia like palatal and intraligamentary infiltrations for root canal treatment in maxillary molars. However there is no general consensus regarding which technique is enough for performing endodontic treatment in maxillary molars. Aim The aim of this questionnaire-based survey is to compare and evaluate the various techniques used to anaesthetize the maxillary molars and its effect on postoperative pain. Materials and Methods The data were obtained from 290 dental practitioners using a specially prepared questionnaire survey conducted anonymously. The questionnaire contained questions covering data such as years in dentistry, acquired specialty, techniques used for anaesthetizing maxillary molars, success of anaesthesia, and postoperative pain, etc. Results Buccal infilteration with supplemental anaesthesia in the form of palatal (82%) and intra-ligamentary infilteration (88%) show higher success rate compared to only buccal infilteration (69%). However, intra-ligamentary infilteration group showed highest rate (75%) of postoperative pain. General practitioners (62% of clinicians) prefer to give both buccal and palatal infilterations and specialists opt for only buccal infilteration (66-74% of specialists). Conclusion Only buccal infilteration is sufficient during root canal treatment of maxillary molars. Routine use of supplemental anaesthesia in the form of palatal and intra-ligamentary infilteration is not necessary unless patient experiences discomfort during endodontic treatment. However, intra-ligamentary infilteration may lead to postoperative discomfort in the form of pain. PMID:27134993

Enhancement of the natural organic matter removal from drinking water by nanofiltration.

PubMed

Matilainen, A; Liikanen, R; Nyström, M; Lindqvist, N; Tuhkanen, T

2004-03-01

Finnish surface waters are abundant in natural organic matter. Natural organic matter can be removed from drinking water in a water treatment process by coagulation and filtration. The standard treatment operations are not able to remove the smallest molar mass fraction of organic matter and the intermediate molar mass matter is only partly removed. The removal of residual natural organic matter from drinking water by nanofiltration was evalueted in this study. Three different nanofiltration membranes were compared in filtering six pre-treated surface waters. The total organic carbon content of the feed waters varied from 2.0 to 4.2 mg l(-1). Other water quality parameters measured were conductivity, alkalinity, hardness, UV-absorbance, SUVA, E2/E3 value and molecular size distribution by high-performance size-exclusion chromatography. The natural organic matter removal efficiencies of the membranes were good and varied between 100% and 49%, and between 85% and 47% according to molecular size distribution and total organic carbon measurements, respectively. Removal of different molecular size fractions varied from 100% to 56%, 100% to 54% and 88% to 19%, regarding high molar mass, intermediate molar mass and low molar mass organic matter, respectively. The Desal-5 DL membrane produced the highest natural organic matter removals.

Thermographic and clinical evaluation of 808-nm laser photobiomodulation effects after third molar extraction.

PubMed

Pedreira, Amanda A; Wanderley, Flavia G; Sa, Maira F; Viena, Camila S; Perez, Adriano; Hoshi, Ryuichi; Leite, Marcia P; Reis, Silvia R; Medrado, Alena P

2016-08-01

A randomized, blind, controlled clinical study was conducted with a convenience sample of 24 patients to evaluate the effectiveness of an aluminum gallium arsenide (AlGaAs) infrared laser 808 nm after third molar extraction by the use of infrared thermography technique. Patients were divided into four groups: erupted third molars were extracted from the patients in Group I and Group II, and impacted third molars were extracted from the patients in Group III and Group IV. Group I and Group III received mock laser therapy in which the device was powered off, and Group II and Group IV were exposed to laser light. Postoperative clinical parameters related to the third molar extraction were evaluated; these parameters included pain, trismus and edema. Circulatory patterns were also evaluated by infrared thermography that exhibited local temperature coefficient at different postoperative periods. A slight improvement was observed for swelling, pain and trismus in patients who received laser irradiation, although the differences were not statistically significant (P>0.05). Laser therapy had a significant influence on the local circulation in the area near the temporomandibular joint, as determined by infrared thermography (P<0.05). Laser therapy was able to change the local circulation, although it did not significantly influence swelling, pain or trismus during the postoperative period.

Na/Cl molar ratio changes during a salting cycle and its application to the estimation of sodium retention in salted watersheds.

PubMed

Sun, Hongbing; Huffine, Maria; Husch, Jonathan; Sinpatanasakul, Leeann

2012-08-01

Using soil column experiments and data from natural watersheds, this paper analyzes the changes in Na/Cl molar ratios during a salting cycle of aqueous-soil systems. The soil column experiments involved introducing NaCl salt at various initial concentrations into multiple soil columns. At the start of a salting cycle in the column experiments, sodium was adsorbed more than chloride due to cation exchange processes. As a result, the initial Na/Cl molar ratio in column effluent was lower than 1, but increased thereafter. One-dimensional PHREEQC geochemical transport simulations also were conducted to further quantify these trends under more diverse scenarios. The experimentally determined Na/Cl molar ratio pattern was compared to observations in the annual salting cycle of four natural watersheds where NaCl is the dominant applied road deicing salt. Typically, Na/Cl molar ratios were low from mid-winter to early spring and increased after the bulk of the salt was flushed out of the watersheds during the summer, fall and early winter. The established relationship between the Na/Cl molar ratios and the amount of sodium retention derived from the column experiments and computer simulations present an alternative approach to the traditional budget analysis method for estimating sodium retention when the experimental and natural watershed patterns of Na/Cl molar ratio change are similar. Findings from this study enhance the understanding of sodium retention and help improve the scientific basis for future environmental policies intended to suppress the increase of sodium concentrations in salted watersheds. Copyright © 2012 Elsevier B.V. All rights reserved.

Clinical study of Mineral Trioxide Aggregate in primary molars. Comparison between Grey and White MTA--a long term follow-up (84 months).

PubMed

Cardoso-Silva, Cristina; Barbería, Elena; Maroto, Myriam; García-Godoy, Franklin

2011-02-01

The aim of the present study was to conduct a clinical and radiographic long-term evaluation of pulpotomy in temporary molars performed with Grey and White Mineral Trioxide Aggregate (MTA) and compare the results of Grey and White MTA pulpotomies in a sample of 233 primary molars with a maximum follow-up period of 84 months. The sample was selected from patients treated at the Department of Pediatric Dentistry, Faculty of Dentistry, Complutense University of Madrid, Spain. This prospective study included first and second primary molars treated with pulpotomy with Grey or White MTA, controlled for a maximum follow-up period of 84 months. Statistical analysis of clinical and radiographic findings was completed using ANOVA (P<0.05). Follow-up evaluations, performed every 6 months, revealed that only 2 molars treated with White MTA presented abscess and pathological mobility. Radiographic examination of the 210 molars revealed unfavourable pulp response in only 6 molars (internal or furcation root resorption), without statistically significant differences between Grey and White MTA. Two radiological findings were noticed: dentine bridge formation and partial or total root canal stenosis. Grey MTA induced a higher percentage of dentine bridges with statistically significant differences (P<0.05), and a higher percentage of pulp canal stenosis, without a statistically significant difference. Grey and White MTA presented high levels of clinical and radiographic success. Although the present study showed evidence of a very good biologic response with both types of MTA, Grey MTA showed significantly higher number of dentine bridge formation than White MTA. Copyright © 2010 Elsevier Ltd. All rights reserved.

Controlling the optical properties of polyaniline doped by boric acid particles by changing their doping agent and initiator concentration

NASA Astrophysics Data System (ADS)

Cabuk, Mehmet; Gündüz, Bayram

2017-12-01

In this study, polyaniline doped by boric acid (PAni:BA) conducting polymers were chemically synthesized by oxidative polymerization method using (NH4)2S208 (APS) as initiator. Pani:BA conducting polymers were synthesized by using two different APS/aniline molar ratios as 1:1 and 2:1. Their results were compared with PAni doped by HCl (PAni) conducting polymer. Structural properties of the PAni, PAni:BA (1:1) and PAni:BA (2:1) conducting polymers were characterized by using FTIR, SEM, TGA, particle size and apparent density measurements. Effects of doping agents and initiator concentrations on optical properties were investigated in detail. The optoelectronic parameters such as absorption band edge, molar extinction coefficient, direct allowed band gap, refractive index, optical conductance and electrical conductance of the PAni, PAni:BA (1:1) and PAni:BA (2:1) were determined. The absorption band edge and direct allowed band gap of PAni were decreased with doping BA and increasing APS ratio. Also, the refractive index values of the materials were calculated from experimental results and compared with obtained results from Moss, Ravindra, Herve-Vandamme, Reddy and Kumar-Singh relations.

Synthesis, characterization and spectroscopic properties of the hydrazodye and new hydrazodye-metal complexes

NASA Astrophysics Data System (ADS)

Bouhdada, M.; EL Amane, M.

2017-12-01

The hydrazodye (L) [disodium (7-hydroxyl-8-phenylazo-1,3-naphthalenedisulfonate)] is prepared and characterized by infrared 1H,13C, NMR and UV-visible spectra. The spectral data of the ligand (L) existing predominantly in the hydrazones form. Reaction of the hydrazodye (L) with Cd2+, Ni2+, Cu2+ and Zn2+ chloride gave two series of metal complexes with general formula [ML2 (OH2)2]2Cl and [ML2 (caf)2]2Cl. Their complexes were identified by FTIR, UV-visible spectra, 1H, 13C, NMR, EPR, XRD and molar conductance. The molar conductance reveals that the new series of metal complexes are non-electrolytes. The postulated octahedral structure of the obtained complexes is also proposed on spectroscopic data analysis.

An empirical relation between the limiting ionic molar conductivities and self-diffusion coefficients of pure solvents

NASA Astrophysics Data System (ADS)

Matsuyama, Hisashi; Motoyoshi, Kota

2018-05-01

The limiting ionic molar conductivity (λ∞) of an electrolyte solution depends on the self-diffusion coefficient (Ds) of the pure solvent when the temperature (T) changes. To study the Ds-dependence of λ∞, we proposed a new empirical relation λ∞ ∝(Ds / T) t , with a parameter t. The relation is applied to the λ∞ and Ds of alkali, tetra-alkyl ammonium, and halogen ions in water or methanol. All ions except for tetra-alkyl ammonium ions in water exhibit excellent linear relationships in their λ∞ ∝(Ds / T) t plots, with t in the range from 0.88 to 1.26. This is the first report showing an affirmative linear correlation between λ∞ and Ds.

Synthesis, structural characterization, fluorescence, antimicrobial, antioxidant and DNA cleavage studies of Cu(II) complexes of formyl chromone Schiff bases.

PubMed

Kavitha, P; Saritha, M; Laxma Reddy, K

2013-02-01

Cu(II) complexes have been synthesized from different Schiff bases, such as 3-((2-hydroxy phenylimino)methyl)-4H-chromen-4-one (HL(1)), 2-((4-oxo-4H-chromen-3-yl)methylneamino) benzoicacid (HL(2)), 3-((3-hydroxypyridin-2-ylimino)methyl)-4H-chromen-4-one (HL(3)) and 3-((2-mercaptophenylimino)methyl)-4H-chromen-4-one (HL(4)). The complexes were characterized by analytical, molar conductance, IR, electronic, magnetic, ESR, thermal, powder XRD and SEM studies. The analytical data reveal that metal to ligand molar ratio is 1:2 in all the complexes. Molar conductivity data indicates that all the Cu(II) complexes are neutral. On the basis of magnetic and electronic spectral data, distorted octahedral geometry is proposed for all the Cu(II) complexes. Thermal behaviour of the synthesized complexes illustrates the presence of lattice water molecules in the complexes. X-ray diffraction studies reveal that all the ligands and their Cu(II) complexes have triclinic system with different unit cell parameters. Antimicrobial, antioxidant and DNA cleavage activities indicate that metal complexes exhibited greater activity as compared with ligands. Copyright © 2012 Elsevier B.V. All rights reserved.

Application of design of experiments for formulation development and mechanistic evaluation of iontophoretic tacrine hydrochloride delivery.

PubMed

Patel, Niketkumar; Jain, Shashank; Madan, Parshotam; Lin, Senshang

2016-11-01

The objective of this investigation is to develop mathematical equation to understand the impact of variables and establish statistical control over transdermal iontophoretic delivery of tacrine hydrochloride. In addition, possibility of using conductivity measurements as a tool of predicting ionic mobility of the participating ions for the application of iontophoretic delivery was explored. Central composite design was applied to study effect of independent variables like current strength, buffer molarity, and drug concentration on iontophoretic tacrine permeation flux. Molar conductivity was determined to evaluate electro-migration of tacrine ions with application of Kohlrausch's law. The developed mathematic equation not only reveals drug concentration as the most significant variable regulating tacrine permeation, followed by current strength and buffer molarity, but also is capable to optimize tacrine permeation with respective combination of independent variables to achieve desired therapeutic plasma concentration of tacrine in treatment of Alzheimer's disease. Moreover, relative higher mobility of sodium and chloride ions was observed as compared to estimated tacrine ion mobility. This investigation utilizes the design of experiment approach and extends the primary understanding of imapct of electronic and formulation variables on the tacrine permeation for the formulation development of iontophoretic tacrine delivery.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Xianhui; Walker, Devin; Maiti, Debtanu

Cylindrical NiMg/Ce 0.6Zr 0.4O 2 pellet catalysts with two different sizes (large: radius = 1.59 mm; and small: radius = 0.75 mm) were produced by extrusion of powder catalysts. The small catalyst pellets had a higher specific surface area, pore volume, average pore size, radial crush strength, and resistance to breakage than the large ones. Tri-reforming tests with surrogate biogas were conducted at 3 bar and 882 °C, with the feed molar ratios of CH 4: CO 2: air fixed at 1.0: 0.7: 0.95 and the H 2O/CH 4 molar feed ratio (0.35 – 1.16) varied. The small catalyst pelletsmore » exhibited lower internal mass transfer resistance and higher coking resistance, compared to the large ones. CO 2 conversion decreased and H 2/CO molar ratio increased with the increase of H 2O/CH 4 molar feed ratio, which are consistent with the trends predicted by thermodynamic equilibrium calculations. Finally, the results indicate that the NiMg/Ce 0.6Zr 0.4O 2 catalyst pellets are promising for commercial scale applications.« less

Study on Pleistocene Fossil Cats (Carnivora, Felidae) From a Limestone Cave in Kenting, Southern Taiwan, East Asia

NASA Astrophysics Data System (ADS)

Gan, Yi; Chang, Chun-Hsiang; Wu, Ming-Chee

2016-04-01

The limestone cave, Lobster Cave, located in the Kenting National Park of southern Taiwan, is yielding numerous Pleistocene mammalian fossils buried within the continental deposits. In this study, fossil molars of clouded leopard (Neofelis nebulosa) recovered from the same horizon in the cave, were examined. Three isolated felid molars; p3, p4 and m1, having a series of progressive increase in size, were believed as belonged to the same individual. Traditional linear measurement and two-dimensional geometric morphometric analysis for the occlusal surface outlines have been conducted on the fossil molars; comparisons were also done with the extant clouded leopard. Results obtained have shown that the cave fossil clouded leopard is closer to the extant clouded leopard in molar characters; but, are slightly larger than the extant ones in their size. Nevertheless, even the clouded leopard in Taiwan was regarded as to have been extinct and its past existence has still been in doubt, the current study revealed that the clouded leopards have inhabited in Taiwan since Pleistocene, and has a larger body size than that of the recent one.

Longitudinal Treatment Outcomes of Microsurgical Treatment of Neurosensory Deficit after Lower Third Molar Surgery: A Prospective Case Series.

PubMed

Leung, Yiu Yan; Cheung, Lim Kwong

2016-01-01

To prospectively evaluate the longitudinal subjective and objective outcomes of the microsurgical treatment of lingual nerve (LN) and inferior alveolar nerve (IAN) injury after third molar surgery. A 1-year longitudinal observational study was conducted on patients who received LN or IAN repair after third molar surgery-induced nerve injury. Subjective assessments ("numbness", "hyperaesthesia", "pain", "taste disturbance", "speech" and "social life impact") and objective assessments (light touch threshold, two-point discrimination, pain threshold, and taste discrimination) were recorded. 12 patients (10 females) with 10 LN and 2 IAN repairs were recruited. The subjective outcomes at post-operative 12 months for LN and IAN repair were improved. "Pain" and "hyperaesthesia" were most drastically improved. Light touch threshold improved from 44.7 g to 1.2 g for LN repair and 2 g to 0.5 g for IAN repair. Microsurgical treatment of moderate to severe LN injury after lower third molar surgery offered significant subjective and objective sensory improvements. 100% FSR was achieved at post-operative 6 months.

MMP20 Overexpression Disrupts Molar Ameloblast Polarity and Migration.

PubMed

Shin, M; Chavez, M B; Ikeda, A; Foster, B L; Bartlett, J D

2018-07-01

Ameloblasts responsible for enamel formation express matrix metalloproteinase 20 (MMP20), an enzyme that cleaves enamel matrix proteins, including amelogenin (AMELX) and ameloblastin (AMBN). Previously, we showed that continuously erupting incisors from transgenic mice overexpressing active MMP20 had a massive cell infiltrate present within their enamel space, leading to enamel mineralization defects. However, effects of MMP20 overexpression on mouse molars were not analyzed, although these teeth more accurately represent human odontogenesis. Therefore, MMP20-overexpressing mice ( Mmp20 +/+ Tg + ) were assessed by multiscale analyses, combining several approaches from high-resolution micro-computed tomography to enamel organ immunoblots. During the secretory stage at postnatal day 6 (P6), Mmp20 +/+ Tg + mice had a discontinuous ameloblast layer and, unlike incisors, molar P12 maturation stage ameloblasts abnormally migrated away from the enamel layer into the stratum intermedium/stellate reticulum. TOPflash assays performed in vitro demonstrated that MMP20 expression promoted β-catenin nuclear localization and that MMP20 expression promoted invasion through Matrigel-coated filters. However, for both assays, significant differences were eliminated in the presence of the β-catenin inhibitor ICG-001. This suggests that MMP20 activity promotes cell migration via the Wnt pathway. In vivo, the unique molar migration of amelogenin-expressing ameloblasts was associated with abnormal deposition of ectopic calcified nodules surrounding the adherent enamel layer. Enamel content was assessed just prior to eruption at P15. Compared to wild-type, Mmp20 +/+ Tg + molars exhibited significant reductions in enamel thickness (70%), volume (60%), and mineral density (40%), and MMP20 overexpression resulted in premature cleavage of AMBN, which likely contributed to the severe defects in enamel mineralization. In addition, Mmp20 +/+ Tg + mouse molar enamel organs had increased levels of inactive p-cofilin, a protein that regulates cell polarity. These data demonstrate that increased MMP20 activity in molars causes premature degradation of ameloblastin and inactivation of cofilin, which may contribute to pathological Wnt-mediated cell migration away from the enamel layer.

Third molar development by measurements of open apices in an Italian sample of living subjects.

PubMed

De Luca, Stefano; Pacifici, Andrea; Pacifici, Luciano; Polimeni, Antonella; Fischetto, Sara Giulia; Velandia Palacio, Luz Andrea; Vanin, Stefano; Cameriere, Roberto

2016-02-01

The aim of this study is to analyse the age-predicting performance of third molar index (I3M) in dental age estimation. A multiple regression analysis was developed with chronological age as the independent variable. In order to investigate the relationship between the I3M and chronological age, the standard deviation and relative error were examined. Digitalized orthopantomographs (OPTs) of 975 Italian healthy subjects (531 female and 444 male), aged between 9 and 22 years, were studied. Third molar development was determined according to Cameriere et al. (2008). Analysis of covariance (ANCOVA) was applied to study the interaction between I3M and the gender. The difference between age and third molar index (I3M) was tested with Pearson's correlation coefficient. The I3M, the age and the gender of the subjects were used as predictive variable for age estimation. The small F-value for the gender (F = 0.042, p = 0.837) reveals that this factor does not affect the growth of the third molar. Adjusted R(2) (AdjR(2)) was used as parameter to define the best fitting function. All the regression models (linear, exponential, and polynomial) showed a similar AdjR(2). The polynomial (2nd order) fitting explains about the 78% of the total variance and do not add any relevant clinical information to the age estimation process from the third molar. The standard deviation and relative error increase with the age. The I3M has its minimum in the younger group of studied individuals and its maximum in the oldest ones, indicating that its precision and reliability decrease with the age. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Synthesis, characterization, structure and properties of heterobimetallic complexes [CuNi(μ-OAc) (μ-OH) (μ-OH2) (bpy)2] (BF4)2 and [CuNi(bz)3(bpy)2] ClO4 from 2,2‧ bipyridine

NASA Astrophysics Data System (ADS)

Kurbah, Sunshine D.; Kumar, A.; Syiemlieh, I.; Dey, A. K.; Lal, R. A.

2018-02-01

Heterobimetallic complexes of the composition [CuNi(bpy)2 (μ-OAc) (μ-OH) (μ-OH2)](BF4)2 (1) and [CuNi(bz)3 (bpy)2]ClO4 (2) were synthesized in moderate yield through solid state reaction and have been characterized by elemental analyses, molar conductance, mass spectra, magnetic moment, EPR, UV-Vis, IR spectroscopies and cyclic voltammetry. The ground state in complex (1) is doublet while that in complex (2), the ground state is a mixture of doublet and quartet, respectively. The structure of the complexes has been established by X-ray crystallography. The electron transfer reactions of the complexes have been investigated by cyclic voltammetry.

Complexation of nitrogen and sulphur donor Schiff's base ligand to Cr(III) and Ni(II) metal ions: Synthesis, spectroscopic and antipathogenic studies

NASA Astrophysics Data System (ADS)

Sharma, Amit Kumar; Chandra, Sulekh

2011-01-01

2,6-Diacetyl pyridine based ligand was synthesized by the reaction of 2,6-diacetyl pyridine with thiocarbohydrazide in presence of acetic acid. The coordination compounds with Cr(III) and Ni(II) metal ions having [Cr(L)X]X 2 and [Ni(L)X]X compositions (where L = ligand and X = NO 3-, Cl - and CH 3COO -) were synthesized and characterized by physicochemical and spectral studies. The studies like elemental analyses, molar conductance measurements, magnetic susceptibility measurements, IR, UV-Vis, NMR, mass and EPR reveal that the complexes are octahedral. The compounds were examined against the pathogenic fungal and bacterial strains like Alternaria brassicae, Aspergillus niger, Fusarium oxysporum, Xanthomonas compestris and Pseudomonas aeruginosa. A. niger causes the diseases Apergillosis and Otomycosis in humans.

Design, synthesis and characterization of macrocyclic ligand based transition metal complexes of Ni(II), Cu(II) and Co(II) with their antimicrobial and antioxidant evaluation

NASA Astrophysics Data System (ADS)

Gull, Parveez; Malik, Manzoor Ahmad; Dar, Ovas Ahmad; Hashmi, Athar Adil

2017-04-01

Three new complexes Ni(II), Cu(II) and Co(II) were synthesized of macrocyclic ligand derived from 1, 4-dicarbonyl-phenyl-dihydrazide and O-phthalaldehyde in the ratio of 2:2. The synthesized compounds were characterized by elemental analyses, molar conductance, magnetic susceptibility measurements, FTIR, UV-Vis., Mass and 1H NMR spectral studies. The electronic spectra of the metal complexes indicate a six coordinate octahedral geometry of the central metal ion. These metal complexes and the ligand were evaluated for antimicrobial activity against bacteria (E. coli, B. subtilis, S. aureus) and fungi (A. niger, A. flavus, C. albicans) and compared against standard drugs chloramphenicol and nystatin respectively. In addition, the antioxidant activity of the compounds was also investigated through scavenging effect on DPPH radicals.

Glass ionomer ART sealant and fluoride-releasing resin sealant in fissure caries prevention – results from a randomized clinical trial

PubMed Central

2014-01-01

Background The relative performance of ART sealant and fluoride-releasing resin sealant in preventing fissure caries in permanent molars was compared in a randomized clinical trial conducted in southern China (ClinicalTrials.gov NCT01829334). Methods After obtaining ethical approval, healthy schoolchildren who had permanent first molars with occlusal fissures which were sound but deep or presented with only incipient caries were recruited for the study. Included molars were randomly allocated into one of four parallel study groups in units of left/right teeth per mouth. Two of the four groups adopted the methods of ART or fluoride-releasing resin sealant placement while the other two groups adopted the topical fluoride application methods. Fissure status of the molars in each group was evaluated every 6 months. Development of dentine caries and sealant retention over 24 months in the molars in the two sealant-using groups was compared in this report. Outcome on cost-effectiveness of all four groups over 36 months will be reported elsewhere. Results At baseline, a total of 280 children (383 molars) with mean age 7.8 years were involved for the two sealant groups. After 24 months, 261 children (357 molars) were followed. Proportions of molars with dentine caries were 7.3% and 3.9% in the ART sealant and fluoride-releasing resin sealant groups, respectively (chi-square test, p = 0.171). Life-table survival analysis showed that sealant retention (full and partial) rate over 24 months for the resin sealant (73%) was significantly higher than that (50%) for the ART sealant (p < 0.001). Molar survival (no development of dentine caries) rates in the ART sealant (93%) and fluoride-releasing resin sealant (96%) groups were not significantly different (p = 0.169). Multilevel logistic regression (GEE modeling) accounting for the effects of data clustering and confounding factors confirmed this finding. Conclusions Though the retention of fluoride-releasing resin sealant was better than that of the ART sealant, their effectiveness in preventing fissure caries in permanent molars did not differ significantly over 24 months. ART sealants could be a good alternative when and where resources for resin sealant placement are not readily available. PMID:24886444

Micro-CT analyses of apical enlargement and molar root canal complexity.

PubMed

Markvart, M; Darvann, T A; Larsen, P; Dalstra, M; Kreiborg, S; Bjørndal, L

2012-03-01

To compare the effectiveness of two rotary hybrid instrumentation techniques with focus on apical enlargement in molar teeth and to quantify and visualize spatial details of instrumentation efficacy in root canals of different complexity. Maxillary and mandibular molar teeth were scanned using X-ray microcomputed tomography. Root canals were prepared using either a GT/Profile protocol or a RaCe/NiTi protocol. Variables used for evaluation were the following: distance between root canal surfaces before and after preparation (distance after preparation, DAP), percentage of root canal area remaining unprepared and increase in canal volume after preparation. Root canals were classified according to size and complexity, and consequences of unprepared portions of narrow root canals and intraradicular connections/isthmuses were included in the analyses. One- and two-way anova were used in the statistical analyses. No difference was found between the two techniques: DAP(apical-third) (P = 0.590), area unprepared(apical-third) (P = 0.126) and volume increase(apical-third) (P = 0.821). Unprepared root canal area became larger in relation to root canal size and complexity, irrespective of the technique used. Percentage of root canal area remaining unprepared was significantly lower in small root canals and complex systems compared to large root canals. The isthmus area per se contributed with a mean of 17.6%, and with a mean of 25.7%, when a narrow root canal remained unprepared. The addition of isthmuses did not significantly alter the ratio of instrumented to unprepared areas at total root canal level. Distal and palatal root canals had the highest level of unprepared area irrespective of the two instrumentation techniques examined. © 2011 International Endodontic Journal.

Correlation of antibiotic prophylaxis and difficulty of extraction with postoperative inflammatory complications in the lower third molar surgery.

PubMed

Lee, J Y; Do, H S; Lim, J H; Jang, H S; Rim, J S; Kwon, J J; Lee, E S

2014-01-01

Our aim was to investigate the correlation among antibiotic prophylaxis, difficulty of extraction, and postoperative complications in the removal of lower 3rd molars. A total of 1222 such extractions in 890 patients between January 2010 and January 2012 were analysed retrospectively. The difficulty of extraction measured by Pederson's index, antibiotic prophylaxis with cefditoren, and postoperative complications were recorded. The difficulty of extraction was significantly associated with postoperative complications (p=0.03). There were no significant associations between antibiotic prophylaxis and postoperative complications in groups of equal difficulty ("easy" group (class I) p=1.00; "moderate" group (class II) p=1.00; and "difficult" group (class III) p=0.65). There was a small but insignificant increase in the number of dry sockets and infections in class III cases. In conclusion, this study provides further evidence that antibiotic prophylaxis for the prevention of postoperative inflammatory complications is unnecessary for extraction of 3rd molars. Copyright © 2013. Published by Elsevier Ltd.

The association between enamel fluorosis and dental caries in U.S. schoolchildren.

PubMed

Iida, Hiroko; Kumar, Jayanth V

2009-07-01

The authors assessed the association between enamel fluorosis and dental caries to determine if there is any beneficial effect of enamel fluorosis in U.S. schoolchildren. The authors used data from a National Institute of Dental Research survey of the oral health of U.S. children conducted in 1986 and 1987 to determine the prevalence of caries and mean decayed, missing or filled surfaces on permanent maxillary right first molars in children 7 to 17 years of age who had a history of a single residence. (To date, this is the only national oral health data set in the United States with detailed information on fluoride exposures.) They examined the association between enamel fluorosis and caries using logistic regression analysis, controlling for potential confounders in communities with water at or above optimal fluoridation levels and in communities with nonfluoridated or suboptimally fluoridated water. Permanent maxillary right first molars with fluorosis consistently had lower levels of caries experience than did normal molars. Adjusted odds ratios for caries prevalence in molars with fluorosis were 0.71 (95 percent confidence interval [CI], 0.56-0.89) in communities with nonfluoridated or suboptimally fluoridated water and 0.89 (95 percent CI, 0.74-1.06) in communities with water at or above optimal fluoridation levels. This study's findings suggest that molars with fluorosis are more resistant to caries than are molars without fluorosis. The results highlight the need for those considering policies regarding reduction in fluoride exposure to take into consideration the caries-preventive benefits associated with milder forms of enamel fluorosis.

[Consequences of impacted wisdom teeth extraction on the periodontal environment of second molars. A pilot study].

PubMed

Martin, R; Louvrier, A; Weber, E; Chatelain, B; Meyer, C

2017-04-01

Wisdom teeth extraction is a common procedure, generally considered as safe by patients. However, complications are possible, especially periodontal ones. The aim of this study was to evaluate the frequency and the consequences of periodontal complications at the level the 2nd molars after extraction of the wisdom teeth. A single-center retrospective observational multi-operator study was conducted at the university hospital of Besançon - France. The files of all the adult patients who underwent extraction of four impacted wisdom teeth by mean of a standardized surgical technique between November 2012 and November 2014 and who could be followed 1 year postoperatively at least and that precisely mentioned the periodontal status of the surgical sites were included. Postoperative complications, gingival and plaque indexes according to Loë and Silness, periodontal attachment level and periodontal second molar probing were recorded. The main judgment criterion was the occurrence of a periodontal complication in the second molar areas. The files of 20 patients (15 women - 5 men), operated on by five different surgeons, met the inclusion criteria. Two patients suffered from dry socket at one of the avulsion sites. No patient had a gingival or plaque index greater than 2. No gingival recession or periodontal pocket over 4mm was found. Extraction of impacted third molars in young healthy adults didn't have any impact on the second molars periodontal environment in our study. Literature suggests that surgical technique greatly influences the occurrence and the extent of periodontal sequelae. Copyright © 2017. Published by Elsevier Masson SAS.

Effect of oxidizer to fuel molar ratio on particle size and DC conductivity of CeO{sub 2} nanoparticles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harish, B. M.; Rajeeva, M. P.; Naveen, C. S.

2016-05-06

Cerium oxide nanoparticles were synthesized by solution combustion method with varying the oxidizer (cerium nitrate hexa hydrate) to fuel (Glycine) molar ratio. The prepared samples were characterized by UV-visible spectrometer, X-ray diffractometer (XRD), Scanning electron microscope (SEM) and Energy dispersive X-Ray analysis (EDAX). XRD pattern reveals the formation of cubic fluorite structure of CeO{sub 2}. It was observed that finest crystallites were found at extreme fuel-deficient condition and it is good enough to produce favorable powder characteristics. The average crystallite size was found to be 14.46 nm to 21.57 nm. The temperature dependent dc conductivity was carried out using Keithleymore » source meter between the temperature range from 300 K to 573 K. From this study it was found that the conductivity increases with increase of temperature due to semiconducting behavior of CeO{sub 2} and it decreases with particle size due to increase in the energy band gap.« less

Cohort study of pain symptoms and management following impacted mandibular third molar extraction.

PubMed

Motonobu, A; Hidemichi, Y; Eri, U; Takashi, T; Kenichi, K

2017-01-01

The aim of this study was to investigate the possibility of intravenous sedation as a useful pain-relieving option for impacted third molar extractions. A prospective cohort study was conducted among patients who underwent bilateral mandibular third molar extractions under local anaesthesia and intravenous sedation (sedation group) and patients who underwent unilateral mandibular third molar extraction under local anaesthesia alone (local anaesthesia group). The frequency of use of postoperative oral analgesia and the intensity of pain assessed using the full cup test were compared between the two groups. The maximum pain intensity (0-100) on postoperative day 1 in the sedation and local anaesthesia groups was 72.8 ± 16.98 and 84.8 ± 15.84, respectively, and the mean pain intensity was 42.2 ± 16.00 and 49.6 ± 18.94. The maximum and mean pain intensities in the sedation group were significantly milder than those in the local anaesthesia group. The number of oral analgesic doses in the sedation group was significantly smaller on the day of surgery and on postoperative day 1 than in the local anaesthesia group. The results of this study suggest that bilateral impacted mandibular third molar extractions under intravenous sedation could be a recommended treatment option. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The prognostic value of panoramic radiography of inferior alveolar nerve damage after mandibular third molar removal: retrospective study of 400 cases.

PubMed

Szalma, József; Lempel, Edina; Jeges, Sára; Szabó, Gyula; Olasz, Lajos

2010-02-01

The aim of the study was to estimate the accuracy of panoramic radiographic signs predicting inferior alveolar nerve (IAN) paresthesia after lower third molar removal. In a case-control study the sample was composed of 41 cases with postoperative IAN paresthesia and 359 control cases without it. The collected data included "classic" specific signs indicating a close spatial relationship between third molar root and inferior alveolar canal (IAC), root curvatures, and the extent of IAC-root tip overlap. Bivariate and multivariate logistic regression analyses were completed to estimate the association between radiographic findings and IAN paresthesia. The multivariate logistic analysis identified 3 signs significantly associated with IAN paresthesia (P < .001): interruption of the superior cortex of the canal wall, diversion of the canal, and darkening of the root. The sensitivities and specificities ranged from 14.6% to 68.3% and from 85.5% to 96.9%, respectively. The positive predictive values, calculated to factor a 1.1% prevalence of paresthesia, ranged from 3.6% to 10.9%, whereas the negative predictive values >99%. Panoramic radiography is an inadequate screening method for predicting IAN paresthesia after mandibular third molar removal. Copyright (c) 2010 Mosby, Inc. All rights reserved.

Determination of the molar extinction coefficient for the ferric reducing/antioxidant power assay.

PubMed

Hayes, William A; Mills, Daniel S; Neville, Rachel F; Kiddie, Jenna; Collins, Lisa M

2011-09-15

The FRAP reagent contains 2,4,6-tris(2-pyridyl)-s-triazine, which forms a blue-violet complex ion in the presence of ferrous ions. Although the FRAP (ferric reducing/antioxidant power) assay is popular and has been in use for many years, the correct molar extinction coefficient of this complex ion under FRAP assay conditions has never been published, casting doubt on the validity of previous calibrations. A previously reported value of 19,800 is an underestimate. We determined that the molar extinction coefficient was 21,140. The value of the molar extinction coefficient was also shown to depend on the type of assay and was found to be 22,230 under iron assay conditions, in good agreement with published data. Redox titration indicated that the ferrous sulfate heptahydrate calibrator recommended by Benzie and Strain, the FRAP assay inventors, is prone to efflorescence and, therefore, is unreliable. Ferrous ammonium sulfate hexahydrate in dilute sulfuric acid was a more stable alternative. Few authors publish their calibration data, and this makes comparative analyses impossible. A critical examination of the limited number of examples of calibration data in the published literature reveals only that Benzie and Strain obtained a satisfactory calibration using their method. Copyright © 2011 Elsevier Inc. All rights reserved.

An in vitro study to find the incidence of mesiobuccal 2 canal in permanent maxillary first molars using three different methods.

PubMed

Vasundhara, V; Lashkari, Krishna Prasada

2017-01-01

In-vitro study was done to evaluate the incidence of MB2 canals using three different methods (CBCT, CLINICAL ANALYSIS AND DENTAL LOUPES) and to compare the efficacy of the three methods in identifying the incidence of MB2 canals in maxillary permanent first molars. The study sample consisted of 120 extracted intact permanent maxillary molars. These extracted teeth were subjected to CBCT. Later the teeth were access opened with naked eye to find the incidence of MB2 canal, and then the teeth were visualised under dental loupe to locate MB2 canal if they were missed under naked eye. Results was statistically analysed by Mc Nemar's tests with Bonferroni correction, Chi square test and Cochran's Q test. CBCT showed high incidence (68.3%) of MB2 canal in maxillary first molars and it showed to be a reliable method in detecting MB2 canal. When compared to dental loupe (52.5%) and naked eye (25%), the dental loupe improved the detection of MB2 canal. Within the parameter of this study in detecting the incidence of MB2 canal, using CBCT dental loupes and naked eye, detection of MB2 canal was significantly higher with CBCT followed by dental loupe and least with naked eye.

Spectroscopic studies and antibacterial activities of some new 16-membered octaazamacrocyclic complexes derived from thiocarbohydrazide and pentane-2,4-dione

NASA Astrophysics Data System (ADS)

Singh, D. P.; Kumar, Krishan; Chopra, Rimpi Mehani ne'e.

2011-02-01

A series of macrocyclic complexes of the type [M(C 12H 20N 8S 2)X 2]; where M = Co(II), Ni(II), Cu(II), Zn(II); X = Cl -, NO 3-, CH 3COO - has been synthesized by template condensation of thiocarbohydrazide and pentane-2,4-dione in the presence of divalent metal salts in methanolic medium. The complexes have been characterized with the help of elemental analyses, conductance measurements, magnetic measurements, electronic, NMR, IR, EPR and MS spectral studies. The low value of molar conductance indicates them to be non-electrolytes. On the basis of various studies a distorted octahedral geometry may be proposed for all of these complexes. These metal complexes were also tested for their in vitro antibacterial activities against some Gram-positive bacterial strains, i.e., Bacillus subtilis, Bacillus stearothermophilus and two Gram-negative bacterial strains, i.e., Escherichia coli, Pseudomonas putida. The results obtained were compared with standard antibiotics, Chloramphenicol and Streptomycin and found that some of the synthesized complexes show good antibacterial activities as compared to the standard antibiotics.

New 14-membered octaazamacrocyclic complexes of divalent transition metal ions with their antimicrobial and spectral studies

NASA Astrophysics Data System (ADS)

Singh, D. P.; Kumar, Krishan; Sharma, Chetan

2010-01-01

A novel series of macrocyclic complexes of the type [M(C 18H 14N 10S 2)X 2]; where M = Co(II), Ni(II), Cu(II), Zn(II) and Cd(II); X = Cl -, NO 3-, CH 3COO - has been synthesized by [2+2] condensation of thiocarbohydrazide and isatin in the presence of divalent metal salts in methanolic medium. The complexes have been characterized with the help of elemental analyses, conductance measurements, magnetic measurements, electronic, NMR and infrared spectral studies. The low value of molar conductance indicates them to be non-electrolytes. On the basis of various studies a distorted octahedral geometry may be proposed for all of these complexes. These metal complexes were also tested for their in vitro antimicrobial activities against some Gram-positive bacteria viz. Staphylococcus aureus, Bacillus subtilis, and some Gram-negative bacteria Escherichia coli, Pseudomonas aeruginosa and some fungal strains Aspergillus niger, Aspergillus flavus (molds), Candida albicans, Saccharomyces cerevisiae (yeasts). The results obtained were compared with standard antibiotic: Ciprofloxacin and the standard antifungal drug: Amphotericin-B.

Electronic energy gap of molecular hydrogen from electrical conductivity measurements at high shock pressures

NASA Technical Reports Server (NTRS)

Nellis, W. J.; Mitchell, A. C.; Mccandless, P. C.; Erskine, D. J.; Weir, S. T.

1992-01-01

Electrical conductivities were measured for liquid D2 and H2 shock compressed to pressures of 10-20 GPa (100-200 kbar), molar volumes near 8 cu cm/mol, and calculated temperatures of 2900-4600 K. The semiconducting energy gap derived from the conductivities is 12 eV, in good agreement with recent quasi-particle calculations and with oscillator frequencies measured in diamond-anvil cells.

Electrical conductivity of low-temperature NaCl-KCl-ZrCl4 melts

NASA Astrophysics Data System (ADS)

Salyulev, A. B.; Khokhlov, V. A.; Red'kin, A. A.

2014-08-01

The dependences of the electrical conductivity of NaCl-KCl-ZrCl4 molten mixtures with a molar ratio NaCl : KCl = 8 : 29 on the temperature (temperature range of 300-540°C) and the ZrCl4 concentration (54.3-75.2 mol %) have been measured for the first time using unique cells.

Adhesives for bonded molar tubes during fixed brace treatment.

PubMed

Millett, Declan T; Mandall, Nicky A; Mattick, Rye Cr; Hickman, Joy; Glenny, Anne-Marie

2017-02-23

Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. The success of a fixed appliance depends partly on the metal attachments (brackets and bands) being glued to the teeth so that they do not become detached during treatment. Brackets (metal squares) are usually attached to teeth other than molars, where bands (metal rings that go round each tooth) are more commonly used. Orthodontic tubes (stainless steel tubes that allow wires to pass through them), are typically welded to bands but they may also be glued directly (bonded) to molars. Failure of brackets, bands and bonded molar tubes slows down the progress of treatment with a fixed appliance. It can also be costly in terms of clinical time, materials and time lost from education/work for the patient. This is an update of the Cochrane review first published in 2011. A new full search was conducted on 15 February 2017 but no new studies were identified. We have only updated the search methods section in this new version. The conclusions of this Cochrane review remain the same. To evaluate the effectiveness of the adhesives used to attach bonded molar tubes, and the relative effectiveness of the adhesives used to attach bonded molar tubes versus adhesives used to attach bands, during fixed appliance treatment, in terms of: (1) how often the tubes (or bands) come off during treatment; and (2) whether they protect the bonded (or banded) teeth against decay. The following electronic databases were searched: Cochrane Oral Health's Trials Register (to 15 February 2017), the Cochrane Central Register of Controlled Trials (CENTRAL; 2017, Issue 1) in the Cochrane Library (searched 15 February 2017), MEDLINE Ovid (1946 to 15 February 2017), and Embase Ovid (1980 to 15 February 2017). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised controlled trials of participants with full arch fixed orthodontic appliance(s) with molar tubes, bonded to first or second permanent molars. Trials which compared any type of adhesive used to bond molar tubes (stainless steel or titanium) with any other adhesive, were included.Trials were also included where:(1) a tube was bonded to a molar tooth on one side of an arch and a band cemented to the same tooth type on the opposite side of the same arch;(2) molar tubes had been allocated to one tooth type in one patient group and molar bands to the same tooth type in another patient group. The selection of papers, decision about eligibility and data extraction were carried out independently and in duplicate without blinding to the authors, adhesives used or results obtained. All disagreements were resolved by discussion. Two trials (n = 190), at low risk of bias, were included in the review and both presented data on first time failure at the tooth level. Pooling of the data showed a statistically significant difference in favour of molar bands, with a hazard ratio of 2.92 (95% confidence intervals (CI) 1.80 to 4.72). No statistically significant heterogeneity was shown between the two studies. Data on first time failure at the patient level were also available and showed statistically different difference in favour of molar bands (risk ratio 2.30; 95% CI 1.56 to 3.41) (risk of event for molar tubes = 57%; risk of event for molar bands 25%).One trial presented data on decalcification again showing a statistically significant difference in favour of molar bands. No other adverse events identified. From the two well-designed and low risk of bias trials included in this review it was shown that the failure of molar tubes bonded with either a chemically-cured or light-cured adhesive was considerably higher than that of molar bands cemented with glass ionomer cement. One trial indicated that there was less decalcification with molar bands cemented with glass ionomer cement than with bonded molar tubes cemented with a light-cured adhesive. However, given there are limited data for this outcome, further evidence is required to draw more robust conclusions.

Prevalence and Pattern of Mandibular Third Molar Impaction in Eritrean Population: A Retrospective Study.

PubMed

Kumar, V Raj; Yadav, Priya; Kahsu, Efrem; Girkar, Farhana; Chakraborty, Rajnish

2017-02-01

The most commonly impacted tooth in the oral cavity is the mandibular third molar. Various etiologic factors have been suggested for impacted mandibular third molars. The pattern and prevalence of impacted mandibular third molars vary with different population and region. This study throws light on the prevalence and pattern of impacted mandibular third molars in Eritrea, East Africa. This is the first reported study regarding the same from Eritrea. To assess the prevalence and pattern of impacted mandibu-lar third molars in the population of Eritrea, East Africa by conducting a retrospective study from January 2009 to January 2014. This study was conducted in the Department of Oral and Maxillofacial Surgery, Orotta School of Medicine and Dental Medicine and the Orotta Referral Medical and Surgical Hospital, Asmara, Eritrea. A total of 1,813 clinical and radiographic records [orthopantomograms] were assessed and 276 cases were selected for the study as per the inclusion criteria. They were evaluated for the frequency among the various age groups, gender and region along with the sides affected, angulation and level of impaction. The presence of systemic conditions and associated pathologies was also assessed according to the type of impaction. The average age of these patients in the study was found to be 30 years, with the 20 to 30 years age group being the most affected (67.4%). Females (53.3%) were affected more than the males (46.7%). People from the Asmara region showed significantly more prevalence (79.7%) than the adjoining areas (20.3%). Mesioangular impaction was the most common angulation with a definite relationship to the age groups (p = 0.032). The level of impaction had no significant relationship to the age groups, gender, or region, although class I position A was found to be the most common type. Mesioangular class I position A impac-tion showed an apparent relationship with underlying systemic conditions, but it was statistically insignificant. Mesioangular impaction was found to be associated with the most number of pathologies (p = 0.001). The prevalence of mandibular impaction was less in Eritrea (15.2%) compared with other populations. This study provides useful baseline data for the prevalence and pattern of mandibular impaction in the Eritrean population. This study throws light on the pattern, type, and frequency of mandibular impacted teeth as per age, sex, and region among the population of Eritrea.

NiMg/Ceria-Zirconia Cylindrical Pellet Catalysts for Tri-reforming of Surrogate Biogas

DOE PAGES

Zhao, Xianhui; Walker, Devin; Maiti, Debtanu; ...

2017-12-22

Cylindrical NiMg/Ce 0.6Zr 0.4O 2 pellet catalysts with two different sizes (large: radius = 1.59 mm; and small: radius = 0.75 mm) were produced by extrusion of powder catalysts. The small catalyst pellets had a higher specific surface area, pore volume, average pore size, radial crush strength, and resistance to breakage than the large ones. Tri-reforming tests with surrogate biogas were conducted at 3 bar and 882 °C, with the feed molar ratios of CH 4: CO 2: air fixed at 1.0: 0.7: 0.95 and the H 2O/CH 4 molar feed ratio (0.35 – 1.16) varied. The small catalyst pelletsmore » exhibited lower internal mass transfer resistance and higher coking resistance, compared to the large ones. CO 2 conversion decreased and H 2/CO molar ratio increased with the increase of H 2O/CH 4 molar feed ratio, which are consistent with the trends predicted by thermodynamic equilibrium calculations. Finally, the results indicate that the NiMg/Ce 0.6Zr 0.4O 2 catalyst pellets are promising for commercial scale applications.« less

High crystalline Cu2ZnSnS4 semiconductor prepared from low toxicity ethanol-based precursors

NASA Astrophysics Data System (ADS)

Munir, Badrul; Prastyo, Bayu Eko; Nurjaya, Dwi Marta; Muslih, Ersan Yudhapratama; Alfauzan, Sahri Karim

2017-01-01

At this moment, we present a new, cost-effective, and environmentally friendly method of preparing a high crystalline Cu2ZnSnS4 (CZTS) absorber layer for thin film solar cells using ethanol-based solutions. Ethanolamine (ETA) and 2-mercaptopropionic acid (MPA) were studied as a stabilizer and to improve wetting ability of the precursors during the deposition process. Cu2ZnSnS4 precursors are deposited onto soda lime glass using spin coater in different molar of cations in the precursor. The effects of a precursor system, ethanol-ETA-MPA, and ethanol-MPA, on the structure, morphology, composition and optical properties of CZTS thin films have been investigated in details. X-ray diffraction and energy-dispersive X-ray spectroscopy analyses confirmed the successful fabrication of high crystalline Cu2ZnSnS4 kesterite phase. The crystallinity of CZTS is continue increasing before reaching 2.2 molar cations of the ethanol-MPA precursors. The crystallinity of ethanol-ETA-MPA precursors remains similar in the experiment using 1.2 molar and 1.6 molars. The highest crystallinity was achieved using 2 molar cations of the ethanol-MPA precursor. Its band gap energy is found to be around 1.4 eV. The SEM micrographs of CZTS film shows the average grain size around 1.5 µm and some porosity which indicated the room of improvement. The high-crystallinity CZTS achieved in the present study brings a low-cost absorber semiconductor one step closer to practical use.

Child oral health-related quality of life (COHQoL), enamel defects of the first permanent molars and caries experience among children in Western Australia.

PubMed

Arrow, P

2013-09-01

Published reports suggest that children with enamel defects, especially where enamel is missing or breaking down, experience considerable discomfort and are generally more fearful of dental treatment. However, children's oral health-related quality of life in relation to enamel defects has not been reported. The aim of this study was to examine the association between oral health-related quality of life among children (COHQoL) with enamel defects of the first permanent molars and deciduous caries experience. Children attending pre-primary schools in metropolitan Perth, Western Australia, were recruited and classified for enamel defects using the modified Developmental Defects of Enamel index. Caries experience of deciduous molars and canines was also recorded. Parents completed a child oral health-related quality of life questionnaire. Data were analysed using Kruskal-Wallis, Spearman's rank correlation, chi-square, multiple linear regression and ordered logistic regression to test the factors for their influence on the COHQoL. From the 550 children assessed (mean age 7.2 years) 522 COHQoL questionnaires were returned. Mean COHQoL score was 8.9 (sd 8.8). Bivariate tests showed no association of COHQoL with enamel defect status of the first permanent molars. COHQoL was associated with dmft (mean dmft 1.96, sd 2.62). Higher caries experience children had poorer reported oral health-related quality of life. The presence of enamel defects in the first permanent molars did not affect the children's oral health-related quality of life.

Reconstructing temporal variation of fluoride uptake in eastern grey kangaroos (Macropus giganteus) from a high-fluoride area by analysis of fluoride distribution in dentine.

PubMed

Kierdorf, Horst; Rhede, Dieter; Death, Clare; Hufschmid, Jasmin; Kierdorf, Uwe

2016-04-01

Trace element profiling in the incrementally formed dentine of mammalian teeth can be applied to reconstruct temporal variation of incorporation of these elements into the tissue. Using an electron microprobe, this study analysed fluoride distribution in dentine of first and third mandibular molars of free-ranging eastern grey kangaroos inhabiting a high-fluoride area, to assess temporal variation in fluoride uptake of the animals. Fluoride content in the early-formed dentine of first molars was significantly lower than in the late-formed dentine of these teeth, and was also lower than in both, the early and the late-formed dentine of third molars. As early dentine formation in M1 takes place prior to weaning, this finding indicates a lower dentinal fluoride uptake during the pre-weaning compared to the post-weaning period. This is hypothetically attributed to the action of a partial barrier to fluoride transfer from blood to milk in lactating females and a low bioavailability of fluoride ingested together with milk. Another factor contributing to lower plasma fluoride levels in juveniles compared to adults is the rapid clearance of fluoride from blood plasma in the former due to their intense skeletal growth. The combined action of these mechanisms is considered to explain why in kangaroos from high-fluoride areas, the (early-formed) first molars are not affected by dental fluorosis while the (later-formed) third and fourth molars regularly exhibit marked to severe fluorotic lesions. Copyright © 2015 Elsevier Ltd. All rights reserved.

3D-Finite element analysis of molars restored with endocrowns and posts during masticatory simulation.

PubMed

Dejak, Beata; Młotkowski, Andrzej

2013-12-01

The objective was to compare equivalent stresses in molars restored with endocrowns as well as posts and cores during masticatory simulation using finite element analysis. Four three-dimensional models of first mandibular molars were created: A - intact tooth; B - tooth restored by ceramic endocrown; C - tooth with FRC posts, composite core and ceramic crown; D - tooth with cast post and ceramic crown. The study was performed using finite element analysis, with contact elements. The computer simulations of mastication were conducted. The equivalent stresses of modified von Mises failure criterion (mvM) in models were calculated, Tsai-Wu index for FRC post was determinate. Maximal values of the stresses in the ceramic, cement and dentin were compared between models and to strength of the materials. Contact stresses in the cement-tissue adhesive interface around restorations were considered as well. During masticatory simulation, the lowest mvM stresses in dentin arisen in molar restored with endocrown (Model B). Maximal mvM stress values in structures of restored molar were 23% lower than in the intact tooth. The mvM stresses in the endocrown did not exceed the tensile strength of ceramic. In the molar with an FRC posts (Model C), equivalent stress values in dentin increased by 42% versus Model B. In ceramic crown of Model C the stresses were 31% higher and in the resin luting cement were 61% higher than in the tooth with endocrown. Tensile contact stresses in the adhesive cement-dentin interface around FRC posts achieved 4 times higher values than under endocrown and shear stresses increased twice. The contact stress values around the appliances were several time smaller than cement-dentin bond strength. Teeth restored by endocrowns are potentially more resistant to failure than those with FRC posts. Under physiological loads, ceramic endocrowns ideally cemented in molars should not be demaged or debonded. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

DNA Binding and Antitumor Activity of α-Diimineplatinum(II) and Palladium(II) Dithiocarbamate Complexes

PubMed Central

Mansouri-Torshizi, Hassan; Saeidifar, Maryam; Khosravi, Fatemeh; Divsalar, Adeleh; Saboury, Ali Akbar; Hassani, Fatemeh

2011-01-01

The two water-soluble designed platinum(II) complex, [Pt(Oct-dtc)(bpy)]NO3 (Oct-dtc = Octyldithiocarbamate and bpy = 2,2′ -bipyridine) and palladium(II) complex, [Pd(Oct-dtc)(bpy)]NO3, have been synthesized and characterized by elemental analyses, molar conductivity measurements, IR, 1H NMR, and electronic spectra studies. Studies of antitumor activity of these complexes against human cell tumor lines (K562) have been carried out. They show Ic50 values lower than that of cisplatin. The complexes have been investigated for their interaction with calf thymus DNA (CT-DNA) by utilizing the electronic absorption spectroscopy, fluorescence spectra, and ethidium bromide displacement and gel filtration techniques. Both of these water-soluble complexes bound cooperatively and intercalatively to the CT-DNA at very low concentrations. Several binding and thermodynamic parameters are also described. PMID:22110410

Comparison of Subgingival and Peri-implant Microbiome in Chronic Periodontitis.

PubMed

Zhang, Qian; Qin, Xue Yan; Jiang, Wei Peng; Zheng, Hui; Xu, Xin Li; Chen, Feng

2015-09-01

To analyse the microbia composition of 10 healthy dental implants and 10 chronic periodontitis patients. Subgingival plaque and peri-implant biofilm were sampled at the first molar site before and after implant restoration. The analysis was conducted by 454-prosequencing of bacterial V1 to V3 regions of 16S rDNA. Chronic periodontitis subjects showed greater bacterial diversity compared with implant subjects. The relative abundance of sixteen genera and twelve species differed significantly between implant and chronic periodontitis subjects. The genera Catonella, Desulfovibrio, Mogibacterium, Peptostreptococcus and Propionibacterium were present in higher abundance in chronic periodontitis subjects, while implant subjects had higher proportions of Brevundimonas and Pseudomonas species. Our results demonstrate that implant restoration changes the oral microbiota. The analysis suggests that periodontal bacteria can remain for a prolonged period of time at non-dental sites, from where they can colonise the peri-implant.

Molecular modelling, spectroscopic characterization and biological studies of tetraazamacrocyclic metal complexes

NASA Astrophysics Data System (ADS)

Rathi, Parveen; Sharma, Kavita; Singh, Dharam Pal

2014-09-01

Macrocyclic complexes of the type [MLX]X2; where L is (C30H28N4), a macrocyclic ligand, M = Cr(III) and Fe(III) and X = Cl-, CH3COO- or NO3-, have been synthesized by template condensation reaction of 1,8-diaminonaphthalene and acetylacetone in the presence of trivalent metal salts in a methanolic medium. The complexes have been formulated as [MLX]X2 due to 1:2 electrolytic nature of these complexes. The complexes have been characterized with the help of elemental analyses, molar conductance measurements, magnetic susceptibility measurements, electronic, infrared, far infrared, Mass spectral studies and molecular modelling. Molecular weight of these complexes indicates their monomeric nature. On the basis of all these studies, a five coordinated square pyramidal geometry has been proposed for all these complexes. These metal complexes have also been screened for their in vitro antimicrobial activities.

Phase stability and microstructures of high entropy alloys ion irradiated to high doses

NASA Astrophysics Data System (ADS)

Xia, Songqin; Gao, Michael C.; Yang, Tengfei; Liaw, Peter K.; Zhang, Yong

2016-11-01

The microstructures of AlxCoCrFeNi (x = 0.1, 0.75 and 1.5 in molar ratio) high entropy alloys (HEAs) irradiated at room temperature with 3 MeV Au ions at the highest fluence of 105, 91, and 81 displacement per atom, respectively, were studied. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) analyses show that the initial microstructures and phase composition of all three alloys are retained after ion irradiation and no phase decomposition is observed. Furthermore, it is demonstrated that the disordered face-centered cubic (FCC) and disordered body-centered cubic (BCC) phases show much less defect cluster formation and structural damage than the NiAl-type ordered B2 phase. This effect is explained by higher entropy of mixing, higher defect formation/migration energies, substantially lower thermal conductivity, and higher atomic level stress in the disordered phases.

Complexation of nitrogen and sulphur donor Schiff's base ligand to Cr(III) and Ni(II) metal ions: synthesis, spectroscopic and antipathogenic studies.

PubMed

Sharma, Amit Kumar; Chandra, Sulekh

2011-01-01

2,6-diacetyl pyridine based ligand was synthesized by the reaction of 2,6-diacetyl pyridine with thiocarbohydrazide in presence of acetic acid. The coordination compounds with Cr(III) and Ni(II) metal ions having [Cr(L)X]X2 and [Ni(L)X]X compositions (where L=ligand and X=NO3-, Cl- and CH3COO-) were synthesized and characterized by physicochemical and spectral studies. The studies like elemental analyses, molar conductance measurements, magnetic susceptibility measurements, IR, UV-Vis, NMR, mass and EPR reveal that the complexes are octahedral. The compounds were examined against the pathogenic fungal and bacterial strains like Alternaria brassicae, Aspergillus niger, Fusarium oxysporum, Xanthomonas compestris and Pseudomonas aeruginosa. A. niger causes the diseases Apergillosis and Otomycosis in humans. Copyright © 2010. Published by Elsevier B.V.

Spectroscopic and mycological studies of Co(II), Ni(II) and Cu(II) complexes with 4-aminoantipyrine derivative

NASA Astrophysics Data System (ADS)

Sharma, Amit Kumar; Chandra, Sulekh

2011-10-01

Complexes of the type [M(L)X 2], where M = Co(II), Ni(II) and Cu(II), have been synthesized with novel NO-donor Schiff's base ligand, 1,4-diformylpiperazine bis(4-imino-2,3-dimethyl-1-phenyl-3-pyrazolin-5-one) which is obtained by the acid catalyzed condensation of 1,4-diformylpiperazine with 4-aminoantipyrine. The elemental analyses, molar conductance measurements, magnetic susceptibility measurements, IR, UV, NMR, mass and EPR studies of the compounds led to the conclusion that the ligand acts as tetradentate chelate. The Schiff's base ligand forms hexacoordinated complexes having octahedral geometry for Ni(II) and tetragonal geometry for Co(II) and Cu(II) complexes. The mycological studies of the compounds were examined against the several opportunistic pathogens, i.e., Alternaria brassicae, Aspergillus niger and Fusarium oxysporum. The Cu(II) complexes were found to have most fungicidal behavior.

Effect of compositional heterogeneity on dissolution of non-ideal LNAPL mixtures

NASA Astrophysics Data System (ADS)

Vasudevan, M.; Johnston, C. D.; Bastow, T. P.; Lekmine, G.; Rayner, J. L.; Nambi, I. M.; Suresh Kumar, G.; Ravi Krishna, R.; Davis, G. B.

2016-11-01

The extent of dissolution of petroleum hydrocarbon fuels into groundwater depends greatly on fuel composition. Petroleum fuels can consist of thousands of compounds creating different interactions within the non-aqueous phase liquid (NAPL), thereby affecting the relative dissolution of the components and hence a groundwater plume's composition over long periods. Laboratory experiments were conducted to study the variability in the effective solubilities and activity coefficients for common constituents of gasoline fuels (benzene, toluene, p-xylene and 1,2,4-trimethylbenzene) (BTX) in matrices with an extreme range of molar volumes and chemical affinities. Four synthetic mixtures were investigated comprising BTX with the bulk of the NAPL mixtures made up of either, ethylbenzene (an aromatic like BTX with similar molar volume); 1,3,5-trimethylbenzene (an aromatic with a greater molar volume); n-hexane (an aliphatic with a low molar volume); and n-decane (an aliphatic with a high molar volume). Equilibrium solubility values for the constituents were under-predicted by Raoult's law by up to 30% (higher experimental concentrations) for the mixture with n-hexane as a filler and over-predicted by up to 12% (lower experimental concentrations) for the aromatic mixtures with ethylbenzene and 1,3,5-trimethylbenzene as fillers. Application of PP-LFER (poly-parameter linear free energy relationship) model for non-ideal mixtures also resulted in poor correlation between experimentally measured and predicted concentrations, indicating that differences in chemical affinities can be the major cause of deviation from ideal behavior. Synthetic mixtures were compared with the dissolution behavior of fresh and naturally weathered unleaded gasoline. The presence of lighter aliphatic components in the gasoline had a profound effect on estimating effective solubility due to chemical affinity differences (estimated at 0.0055 per percentage increase in the molar proportion of aliphatic) as well as reduced molar volumes (estimated at - 0.0091 in the activity coefficient per unit increase in molar volume, mL/mol). Previously measured changes in activity coefficients due to natural weathering of 0.25 compares well to 0.27 calculated here based on changes in the chemical affinity and molar volumes. The study suggests that the initial estimation of the composition of a fuel is crucial in evaluating dissolution processes due to ideal and non-ideal dissolution, and in predicting long term dissolution trends and the longevity of NAPL petroleum plume risks.

Third molar maturity index by measurements of open apices in a Libyan sample of living subjects.

PubMed

Dardouri, Ashref Ali Khalifa; Cameriere, Roberto; De Luca, Stefano; Vanin, Stefano

2016-10-01

In most countries, forensic age estimation in living subjects has become increasingly important in the last few years. In addition, as the age of legal majority ranges from 14 to 18 in many countries, and in Libya it is 18 years, radiographic assessment of the degree of third molar development is essential for forensic age estimation of adolescents and young adults. The aim of this paper is to assess the accuracy of the cut-off value of 0.08, by measurements of third molar index (I 3M ), in determining if a subject is adult or not in Libyan population. Digital panoramic radiographs of 307 healthy subjects (163 girls, 144 boys), aged between 14 and 22, were analysed. The I 3M, the age and the sex of the subjects were used as predictive variable for age estimation. Using a cut-off of 0.08, the sensitivity of the test for boys was 90.9% and the specificity 100%. The proportion of correctly classified individuals was 95.1% (95% CI: 91.5-98.7%). The sensitivity for girls was 90.6% and the specificity 100%. The proportion of correctly classified individuals was 94.5% (95% CI: 90.9-98.1%). Estimated post-test probability in boys and girls was 100%. Further analyses, performed using a cut-off of 0.09, do not affect the specificity (100%) while they improve the sensitivity for both boys and girls. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Extruded upper first molar intrusion: Comparison between unilateral and bilateral miniscrew anchorage.

PubMed

Sugii, Mari Miura; Barreto, Bruno de Castro Ferreira; Francisco Vieira-Júnior, Waldemir; Simone, Katia Regina Izola; Bacchi, Ataís; Caldas, Ricardo Armini

2018-01-01

The aim of his study was to evaluate the stress on tooth and alveolar bone caused by orthodontic intrusion forces in a supraerupted upper molar, by using a three-dimensional Finite Element Method (FEM). A superior maxillary segment was modeled in the software SolidWorks 2010 (SolidWorks Corporation, Waltham, MA, USA) containing: cortical and cancellous bone, supraerupted first molar, periodontal tissue and orthodontic components. A finite element model has simulated intrusion forces of 4N onto a tooth, directed to different mini-screw locations. Three different intrusion mechanics vectors were simulated: anchoring on a buccal mini-implant; anchoring on a palatal mini-implant and the association of both anchorage systems. All analyses were performed considering the minimum principal stress and total deformation. Qualitative analyses exhibited stress distribution by color maps. Quantitative analysis was performed with a specific software for reading and solving numerical equations (ANSYS Workbench 14, Ansys, Canonsburg, Pennsylvania, USA). Intrusion forces applied from both sides (buccal and palatal) resulted in a more homogeneous stress distribution; no high peak of stress was detected and it has allowed a vertical resultant movement. Buccal or palatal single-sided forces resulted in concentrated stress zones with higher values and tooth tipping to respective force side. Unilateral forces promoted higher stress in root apex and higher dental tipping. The bilateral forces promoted better distribution without evidence of dental tipping. Bilateral intrusion technique suggested lower probability of root apex resorption.

Clinical and radiographic success of mineral trioxide aggregate compared with formocresol as a pulpotomy treatment in primary molars: a systematic review and meta-analysis.

PubMed

Marghalani, Abdullah A; Omar, Samah; Chen, Jung-Wei

2014-07-01

The authors conducted a systematic review and meta-analysis to compare the long-term clinical and radiographic success of using mineral trioxide aggregate (MTA) and formocresol (FC) as a pulp-dressing material in pulpotomy treatment in primary molars. The authors searched MEDLINE, Thomson Reuters Web of Science and the Cochrane Central Register of Controlled Trials for randomized controlled trials (RCTs) published from Jan. 1, 1990, to May 9, 2013. For an RCT to be included, the authors required that the primary molars treated with a pulpotomy procedure must have received stainless steel crowns as a final restoration and that rubber dam isolation was used during treatment; that the pulp must have been vital as determined clinically by means of hemorrhage control with a cotton pellet; and that the RCT must have included a follow-up period of at least two years. For each included RCT, two authors assessed the risk of bias independently. The authors identified 20 trials and included five of them. A total of 377 primary molars were treated. The authors judged that none of the included RCTs had a low risk of bias. They noted no significant differences in clinical success (relative risk [RR] = 1.01; 95 percent confidence interval [CI], 0.98-1.05) and radiographic success (RR = 1.09; 95 percent CI, 0.97-1.21) for primary molars treated with MTA versus those treated with FC. On the basis of the limited evidence, pulpotomy procedures performed in primary molars involving the use of MTA or FC showed comparable clinical success rates.

Internal and external morphology of mandibular molars: An original micro-CT study and meta-analysis with review of implications for endodontic therapy.

PubMed

Tomaszewska, Iwona M; Skinningsrud, Bendik; Jarzębska, Anna; Pękala, Jakub R; Tarasiuk, Jacek; Iwanaga, Joe

2018-03-25

The aim of this radiological micro-CT study and meta-analysis was to determine the morphological features of the root canal anatomy of the mandibular molars. The radiological study included micro-CT scans of 108 mandibular first, 120 mandibular second, and 146 mandibular third molars. For our meta-analysis, an extensive search was conducted through PubMed, Embase, and Web of Science to identify articles eligible for inclusion. Data extracted included investigative method (cadaveric, intraoperative, or imaging), Vertucci type of canal configuration, presence/number of canals, roots, apical foramina, apical deltas, and intercanal communications. In the mesial roots of mandibular molars, the most frequent Vertucci type of canal configuration was type IV, except for the mandibular third molar where type I was most common. Type I was most common in the distal root. There were usually two canals in the mesial root and one in the distal root. Two was the most common number of roots, and a third root was most prevalent in Asia. One apical foramen was most common in the distal root and two apical foramina in the mesial root. Intercanal communications were most frequent in the mesial root. Knowledge of the complex anatomy of the mandibular molars can make root canal therapy more likely to succeed. We recommend the use of cone-beam computed tomography before and after endodontic treatment to enable the root anatomy to be accurately described and properly diagnosed, and treatment outcome to be assessed. Clin. Anat. 00:000-000, 2018. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.

Fluid inclusion volatile analysis by gas chromatography with photoionization micro-thermal conductivity detectors: Applications to magmatic MoS 2 and other H 2O-CO 2 and H 2O-CH 4 fluids

NASA Astrophysics Data System (ADS)

Bray, C. J.; Spooner, E. T. C.

1992-01-01

Eighteen fluid inclusion volatile peaks have been detected and identified from 1-2 g samples (quartz) by gas chromatography using heated (~105°C) on-line crushing, helium carrier gas, a single porous polymer column (HayeSep R; 10' × 1/8″: 100/120#; Ni alloy tubing), two temperature programme conditions for separate sample aliquots, micro-thermal conductivity (TCD) and photoionization detectors (PID; 11.7 eV lamp), and off-line digital peak processing. In order of retention time these volatile peaks are: N 2, Ar, CO, CH 4, CO 2, C 2H 4, C 2H 6, C 2H 2, COS, C 3H 6, C 3H 8, C 3H 4 (propyne), H 2O (22.7 min at 80°C), SO 2, ± iso- C4H10 ± C4H8 (1-butene) ± CH3SH, C 4H 8 (iso-butylene), (?) C 4H 6 (1,3 butadiene) and ± n- C4H10 ± C4H8 (trans-2-butene) (80 and -70°C temperature programme conditions combined). H 2O is analysed directly. O 2 can be analysed cryogenically between N 2 and Ar, but has not been detected in natural samples to date in this study. H 2S, SO 2, NH 3, HCl, HCN, and H 2 ca nnot be analysed at present. Blanks determined by crushing heat-treated Brazilian quartz (800-900°C/4 h) are zero for 80°C temperature programme conditions, except for a large, unidentified peak at ~64 min, but contain H 2O, CO 2, and some low molecular weight hydrocarbons at -70°C temperature conditions due to cryogenic accumulation from the carrier gas and subsequent elution. TCD detection limits are ~30 ppm molar in inclusions; PID detection limits are ~ 1 ppm molar in inclusions and lower for unsaturated hydrocarbons (e.g., ~0.2 ppm for C 2H 4; ~ 1 ppb for C 2H 2; ~0.3 ppb for C 3H 6). Precisions (1σ) are ~ ±1-2% and ~ ± 13% for H 2O in terms of total moles detected; the latter value is equivalent to ±0.6 mol% at the 95 mol% H 2O level. Major fluid inclusion volatile species have been successfully analysed on a ~50 mg fluid inclusion section chip (~7 mm × ~10 mm × ~100 μm). Initial inclusion volatile analyses of fluids of interpreted magmatic origin from the Cretaceous Boss Mtn. monzogranite stock-related MoS 2 deposit, central British Columbia of ~97 mol% H 2O, ~3% CO 2, ~ 140-150 ppm N 2, and ~16-39 ppm CH 4 (~300-350°C) are reasonable in comparison with high temperature (~400-900°C) volcanic gas analyses from four, active calc-alkaline volcanoes; e.g., the H 2O contents of volcanic gases from the White Island (New Zealand), Mount St. Helens (Washington, USA), Merapi (Bali, Indonesia), and Momotombo (Nicaragua) volcanoes are 88-95%, >90% (often >95%), 88-95% and ~93%, respectively; CO 2 contents are ~3-10%, 1-10%, 3-8%, and ~3.5%. CO 2/N 2 ratios for the Boss Mtn. MoS 2 fluids of ~ 190-220 are in the range for known volcanic gas ratios (e.g., ~ 150- 240; White Island). The ∑S content of the Boss Mtn. MoS 2 fluid prior to S loss by sulphide precipitation may have been ~2 mol% since CO 2/∑S molar ratios of analysed high-temperature volcanic gases are ~ 1.5. This estimate is supported by ∑S contents for White Island, Merapi and Momotombo volcanic gases of ~2%, ~0.5-2.5%, and ~2%. COS has been determined in H 2O-CO 2 fluid inclusions of interpreted magmatic origin from the Boss Mtn. MoS 2 deposit and the Tanco zoned granitic pegmatite, S.E. Manitoba at ~50-100 ppm molar levels, which are consistent with levels in volcanic gases. It appears that low, but significant, concentrations of C 2-C 4 alkanes (~ 1-20 ppm), C 2-C 4 alkenes (~ 1-480 ppb) and alkynes (e.g., C 3H 4) have been detected in magmatically derived fluids (Boss Mtn. MoS 2 deposit; Tanco granitic pegmatite). Significantly higher, low molecular weight hydrocarbon concentrations have been determined in a CH 4-rich (~ 2%), externally derived fluid of possible metamorphic or deep crustal origin trapped as inclusions in metasomatic wall-rock tourmaline adjacent to the Tanco pegmatite (e.g., 300/470 ppm C 2H 6; 50/90 ppm C 3H 8; 3-60 ppm C 2H 4/C 3H 6 n-C 4H 10).

Compositional dependent partial molar volume and compressibility of CO2 in rhyolite, phonolite and basalt glasses

NASA Astrophysics Data System (ADS)

Lerch, P.; Seifert, R.; Malfait, W. J.; Sanchez-Valle, C.

2012-12-01

Carbon dioxide is the second most abundant volatile in magmatic systems and plays an important role in many magmatic processes, e.g. partial melting, volatile saturation, outgassing. Despite this relevance, the volumetric properties of carbon-bearing silicates at relevant pressure and temperature conditions remain largely unknown because of considerable experimental difficulties associated with in situ measurements. Density and elasticity measurements on quenched glasses can provide an alternative source of information. For dissolved water, such measurements indicate that the partial molar volume is independent of compositions at ambient pressure [1], but the partial molar compressibility is not [2, 3]. Thus the partial molar volume of water may depend on melt composition at elevated pressure. For dissolved CO2, no such data is available. In order to constrain the effect of magma composition on the partial molar volume and compressibility of dissolved carbon, we determined the density and elasticity for three series of carbon-bearing basalt, phonolite and rhyolite glasses, quenched from 3.5 GPa and relaxed at ambient pressure. The CO2 content varies between 0 to 3.90 wt% depending on the glass composition. Glass densities were determined using the sink/float method in a diiodomethane (CH2I2) - acetone mixture. Brillouin measurements were conducted on relaxed and unrelaxed silicate glasses in platelet geometry to determine the compressional (VP) and shear (VS) wave velocities and elastic moduli. The partial molar volume of CO2 in rhyolite, phonolite and basalt glasses is 25.4 ± 0.9, 22.1 ± 0.6 and 26.6 ±1.8 cm3/mol, respectively. Thus, unlike for dissolved water, the partial molar volume of CO2 displays a resolvable compositional effect. Although the composition and CO2/carbonate speciation of the phonolite glasses is intermediate between that of the rhyolite and basalt glasses, the molar volume is not. Similar to dissolved water, the partial molar bulk modulus of CO2 displays a strong compositional effect. If these compositional dependencies persist in the analogue melts, the partial molar volume of dissolved CO2 will depend on melt composition, both at low and elevated pressure. Thus, for CO2-bearing melts, a full quantitative understanding of density dependent magmatic processes, such as crystal fractionation, magma mixing and melt extraction will require in situ measurements for a range of melt compositions. [1] Richet, P. et al., 2000, Contrib Mineral Petrol, 138, 337-347. [2] Malfait et al. 2011, Am. Mineral. 96, 1402-1409. [3] Whittington et al., 2012, Am. Mineral. 97, 455-467.

Analysis of the gutta-percha filled area in C-shaped mandibular molars obturated with a modified MicroSeal technique.

PubMed

Ordinola-Zapata, R; Bramante, C M; de Moraes, I G; Bernardineli, N; Garcia, R B; Gutmann, J L

2009-03-01

To analyse the gutta-percha filled area of C-shaped molar teeth root filled with the modified MicroSeal technique with reference to the radiographic features and the C-shaped canal configuration. Twenty-three mandibular second molar teeth with C-shaped roots were classified according to their radiographic features as: type I--merging, type II--symmetrical and type III--asymmetrical. The canals were root filled using a modified technique of the MicroSeal system. Horizontal sections at intervals of 600 mum were made 1 mm from the apex to the subpulpal floor level. The percentage of gutta-percha area from the apical, middle and coronal levels of the radiographic types was analysed using the Kruskal-Wallis test. Complementary analysis of the C-shaped canal configurations (C1, C2 and C3) determined from cross-sections from the apical third was performed in a similar way. No significant differences were found between the radiographic types in terms of the percentage of gutta-percha area at any level (P > 0.05): apical third, type I: 77.04%, II: 70.48% and III: 77.13%, middle third, type I: 95.72%, II: 93.17%, III: 91.13% and coronal level, type I: 98.30%, II: 98.25%, III: 97.14%. Overall, the percentage of the filling material was lower in the apical third (P < 0.05). No significant differences were found between the C-shaped canal configurations apically; C1: 72.64%, C2: 79.62%, C3: 73.51% (P > 0.05). The percentage of area filled with gutta-percha was similar in the three radiographic types and canal configuration categories of C-shaped molars. These results show the difficulty of achieving predictable filling of the root canal system when this anatomical variation exists. In general, the apical third was less completely filled.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Yuanyuan; Smith, Charles E.; Cai, Zhonghou

Amelogenin is required for normal enamel formation and is the most abundant protein in developing enamel. Methods. Amelx +/+, Amelx +/- and Amelx -/- molars and incisors from C57BL/6 mice were characterized using RT-PCR, Western blotting, dissecting and light microscopy, immunohistochemistry (IHC), transmission electron microscopy (TEM), scanning electron microscopy (SEM), backscattered SEM (bSEM), nanohardness testing, and X-ray diffraction. No amelogenin protein was detected by Western blot analyses of enamel extracts from Amelx -/- mice. Amelx -/- incisor enamel averaged 20.3±3.3 μm in thickness, or only 1/6th that of the wild-type (122.3±7.9 μm). Amelx -/- incisor enamel nanohardness was 1.6 Gpa,more » less than half that of wild-type enamel (3.6 Gpa). Amelx +/- incisors and molars showed vertical banding patterns unique to each tooth. IHC detected no amelogenin in Amelx -/- enamel and varied levels of amelogenin in Amelx +/- incisors, which correlated positively with enamel thickness, strongly supporting lyonization as the cause of the variations in enamel thickness. TEM analyses showed characteristic mineral ribbons in Amelx +/+ and Amelx -/- enamel extending from mineralized dentin collagen to the ameloblast. The Amelx-/- enamel ribbons were not well-separated by matrix and appeared to fuse together, forming plates. Furthermore, x-ray diffraction determined that the predominant mineral in Amelx -/- enamel is octacalcium phosphate (not calcium hydroxyapatite). Amelx -/- ameloblasts were similar to wild-type ameloblasts except no Tomes’ processes extended into the thin enamel. Amelx -/- and Amelx +/- molars both showed calcified nodules on their occlusal surfaces. Histology of D5 and D11 developing molars showed nodules forming during the maturation stage. Amelogenin forms a resorbable matrix that separates and supports, but does not shape early secretory stage enamel ribbons. Amelogenin may facilitate the conversion of enamel ribbons into hydroxyapatite by inhibiting the formation of octacalcium phosphate. Finally, amelogenin is necessary for thickening the enamel layer, which helps maintain ribbon organization and development and maintenance of the Tomes process.« less

The relationship between mineral contents, particle matter and bottom ash distribution during pellet combustion: molar balance and chemometric analysis.

PubMed

Jeguirim, Mejdi; Kraiem, Nesrine; Lajili, Marzouk; Guizani, Chamseddine; Zorpas, Antonis; Leva, Yann; Michelin, Laure; Josien, Ludovic; Limousy, Lionel

2017-04-01

This paper aims to identify the correlation between the mineral contents in agropellets and particle matter and bottom ash characteristics during combustion in domestic boilers. Four agrifood residues with higher mineral contents, namely grape marc (GM), tomato waste (TW), exhausted olive mill solid waste (EOMSW) and olive mill wastewater (OMWW), were selected. Then, seven different pellets were produced from pure residues or their mixture and blending with sawdust. The physico-chemical properties of the produced pellets were analysed using different analytical techniques, and a particular attention was paid to their mineral contents. Combustion tests were performed in 12-kW domestic boiler. The particle matter (PM) emission was characterised through the particle number and mass quantification for different particle size. The bottom ash composition and size distribution were also characterised. Molar balance and chemometric analyses were performed to identify the correlation between the mineral contents and PM and bottom ash characteristics. The performed analyses indicate that K, Na, S and Cl are released partially or completely during combustion tests. In contrast, Ca, Mg, Si, P, Al, Fe and Mn are retained in the bottom ash. The chemometric analyses indicate that, in addition to the operating conditions and the pellet ash contents, K and Si concentrations have a significant effect on the PM emissions as well as on the agglomeration of bottom ash.

Testing the inhibitory cascade model in Mesozoic and Cenozoic mammaliaforms

PubMed Central

2013-01-01

Background Much of the current research in the growing field of evolutionary development concerns relating developmental pathways to large-scale patterns of morphological evolution, with developmental constraints on variation, and hence diversity, a field of particular interest. Tooth morphology offers an excellent model system for such ‘evo-devo’ studies, because teeth are well preserved in the fossil record, and are commonly used in phylogenetic analyses and as ecological proxies. Moreover, tooth development is relatively well studied, and has provided several testable hypotheses of developmental influences on macroevolutionary patterns. The recently-described Inhibitory Cascade (IC) Model provides just such a hypothesis for mammalian lower molar evolution. Derived from experimental data, the IC Model suggests that a balance between mesenchymal activators and molar-derived inhibitors determines the size of the immediately posterior molar, predicting firstly that molars either decrease in size along the tooth row, or increase in size, or are all of equal size, and secondly that the second lower molar should occupy one third of lower molar area. Here, we tested the IC Model in a large selection of taxa from diverse extant and fossil mammalian groups, ranging from the Middle Jurassic (~176 to 161 Ma) to the Recent. Results Results show that most taxa (~65%) fell within the predicted areas of the Inhibitory Cascade Model. However, members of several extinct groups fell into the regions where m2 was largest, or rarely, smallest, including the majority of the polyphyletic “condylarths”. Most Mesozoic mammals fell near the centre of the space with equality of size in all three molars. The distribution of taxa was significantly clustered by diet and by phylogenetic group. Conclusions Overall, the IC Model was supported as a plesiomorphic developmental system for Mammalia, suggesting that mammal tooth size has been subjected to this developmental constraint at least since the divergence of australosphenidans and boreosphenidans approximately 180 Ma. Although exceptions exist, including many ‘condylarths’, these are most likely to be secondarily derived states, rather than alternative ancestral developmental models for Mammalia. PMID:23565593

Enhancement of bismuth antibacterial activity with lipophilic thiol chelators.

PubMed Central

Domenico, P; Salo, R J; Novick, S G; Schoch, P E; Van Horn, K; Cunha, B A

1997-01-01

The antibacterial properties of bismuth are greatly enhanced when bismuth is combined with certain lipophilic thiol compounds. Antibacterial activity was enhanced from 25- to 300-fold by the following seven different thiols, in order of decreasing synergy: 1,3-propanedithiol, dimercaprol (BAL), dithiothreitol, 3-mercapto-2-butanol, beta-mercaptoethanol, 1-monothioglycerol, and mercaptoethylamine. The dithiols produced the greatest synergy with bismuth at optimum bismuth-thiol molar ratios of from 3:1 to 1:1. The monothiols were generally not as synergistic and required molar ratios of from 1:1 to 1:4 for optimum antibacterial activity. The most-active mono- or dithiols were also the most soluble in butanol. The intensity of the yellow formed by bismuth-thiol complexes reflected the degree of chelation and correlated with antibacterial potency at high molar ratios. The bismuth-BAL compound (BisBAL) was active against most bacteria, as assessed by broth dilution, agar diffusion, and agar dilution analyses. Staphylococci (MIC, 5 to 7 microM Bi3+) and Helicobacter pylori (MIC, 2.2 microM) were among the most sensitive bacteria. Gram-negative bacteria were sensitive (MIC, < 17 microM). Enterococci were relatively resistant (MIC, 63 microM Bi3+). The MIC range for anaerobes was 15 to 100 microM Bi3+, except for Clostridium difficile (MIC, 7.5 microM). Bactericidal activity averaged 29% above the MIC. Bactericidal activity increased with increasing pH and/or increasing temperature. Bismuth-thiol solubility, stability, and antibacterial activity depended on pH and the bismuth-thiol molar ratio. BisBAL was stable but ineffective against Escherichia coli at pH 4. Activity and instability (reactivity) increased with increasing alkalinity. BisBAL was acid soluble at a molar ratio of greater than 3:2 and alkaline soluble at a molar ratio of less than 2:3. In conclusion, certain lipophilic thiol compounds enhanced bismuth antibacterial activity against a broad spectrum of bacteria. The activity, solubility, and stability of BisBAL were strongly dependent on the pH, temperature, and molar ratio. Chelation of bismuth with certain thiol agents enhanced the solubility and lipophilicity of this cationic heavy metal, thereby significantly enhancing its potency and versatility as an antibacterial agent. PMID:9257744

Syntheses and characterization of Ru(III) with chelating containing ONNO donor quadridentate Schiff bases.

PubMed

Refat, Moamen S; El-Korashy, Sabry A; Kumar, Deo Nandan; Ahmed, Ahmed S

2008-09-01

Complexes of ruthenium(III) with N,N'-disalicylidene-l,2-phenylenediamine (H2dsp), N,N'-disalicylidene-3,4-diaminotoluene (H2dst), 4-nitro-N,N'-disalicylidene-1,2-phenylenediamine (H2ndsp) and N,N'-disalicylidene ethylenediamine (H2salen) have been prepared and characterized by elemental analysis, molar conductivity, spectral methods (mid-infrared, 1H NMR and UV-vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. The molar conductance measurements proved that all these complexes are non-electrolytes. The electronic spectra measurements were used to infer the structures. The IR spectra of the ligands and their complexes are used to identify the type of bonding. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The four ligands and their complexes have been studied for their possible biological antifungal activity.

Transparent and conducting ZnO films grown by spray pyrolysis

NASA Astrophysics Data System (ADS)

Hadjeris, Lazhar; Herissi, Labidi; Badreddine Assouar, M.; Easwarakhanthan, Thomas; Bougdira, Jamal; Attaf, Nadhir; Salah Aida, M.

2009-03-01

ZnO films were prepared using the simple, flexible and cost-effective spray pyrolysis technique at different substrate temperatures and precursor molarity values. The films' structural, optical and electrical properties were investigated by x-ray diffraction, UV-VIS transmittance spectroscopy, profilometry and voltage-current-temperature (VIT) measurements. The films prepared at substrate temperatures above 400 °C appear better crystallized with (0 0 2) preferred orientation and exhibit higher visible transmittance (65-80%), higher electrical n-type semiconductor conductivity (10-50 (Ω cm)-1), lower activation energy (<0.35 eV) and smaller Urbach energy (80 meV). These results indicate that such sprayed ZnO films are chemically purer and have many fewer defects and less disorder owing to an almost complete chemical decomposition of the precursor droplets. ZnO films having desired optical and electrical properties for cheaper large-area solar cells may thus be tailored through the substrate temperature and the precursor molarity.

Preparation and Antioxidant Activity of Ethyl-Linked Anthocyanin-Flavanol Pigments from Model Wine Solutions.

PubMed

Li, Lingxi; Zhang, Minna; Zhang, Shuting; Cui, Yan; Sun, Baoshan

2018-05-03

Anthocyanin-flavanol pigments, formed during red wine fermentation and storage by condensation reactions between anthocyanins and flavanols (monomers, oligomers, and polymers), are one of the major groups of polyphenols in aged red wine. However, knowledge of their biological activities is lacking. This is probably due to the structural diversity and complexity of these molecules, which makes the large-scale separation and isolation of the individual compounds very difficult, thus restricting their further study. In this study, anthocyanins (i.e., malvidin-3-glucoside, cyanidin-3-glucoside, and peonidin-3-glucoside) and (⁻)-epicatechin were first isolated at a preparative scale by high-speed counter-current chromatography. The condensation reaction between each of the isolated anthocyanins and (⁻)-epicatechin, mediated by acetaldehyde, was conducted in model wine solutions to obtain ethyl-linked anthocyanin-flavanol pigments. The effects of pH, molar ratio, and temperature on the reaction rate were investigated, and the reaction conditions of pH 1.7, molar ratio 1:6:10 (anthocyanin/(⁻)-epicatechin/acetaldehyde), and reaction temperature of 35 °C were identified as optimal for conversion of anthocyanins to ethyl-linked anthocyanin-flavanol pigments. Six ethyl-linked anthocyanin-flavanol pigments were isolated in larger quantities and collected under optimal reaction conditions, and their chemical structures were identified by HPLC-QTOF-MS and ECD analyses. Furthermore, DPPH, ABTS, and FRAP assays indicate that ethyl-linked anthocyanin-flavanol pigments show stronger antioxidant activities than their precursor anthocyanins.

A novel multi-tiered experimental approach unfolding the mechanisms behind cyclodextrin-vitamin inclusion complexes for enhanced vitamin solubility and stability.

PubMed

Braithwaite, Miles C; Kumar, Pradeep; Choonara, Yahya E; du Toit, Lisa C; Tomar, Lomas K; Tyagi, Charu; Pillay, Viness

2017-10-30

This study was conducted to provide a mechanistic account for understanding the synthesis, characterization and solubility phenomena of vitamin complexes with cyclodextrins (CD) for enhanced solubility and stability employing experimental and in silico molecular modeling strategies. New geometric, molecular and energetic analyses were pursued to explicate experimentally derived cholecalciferol complexes. Various CD molecules (α-, β-, γ-, and hydroxypropyl β-) were complexed with three vitamins: cholecalciferol, ascorbic acid and α-tocopherol. The Inclusion Efficiency (IE%) was computed for each CD-vitamin complex. The highest IE% achieved for a cholecalciferol complex was for 'βCDD 3 -8', after utilizing a unique CD:cholecalciferol molar synthesis ratio of 2.5:1, never before reported as successful. 2HPβCD-cholecalciferol, γCD-cholecalciferol and α-tocopherol inclusion complexes (IC's) reached maximal IE% with a CD:vitamin molar ratio of 5:1. The results demonstrate that IE%, thermal stability, concentration, carrier solubility, molecular mechanics and intended release profile are key factors to consider when synthesizing vitamin-CD complexes. Phase-solubility data provided insights into the design of formulations with IC's that may provide analogous oral vitamin release profiles even when hydrophobic and hydrophilic vitamins are co-incorporated. Static lattice atomistic simulations were able to validate experimentally derived cholecalciferol IE phenomena and are invaluable parameters when approaching formulation strategies using CD's for improved solubility and efficacy of vitamins. Copyright © 2017 Elsevier B.V. All rights reserved.

Thermophysical Properties of Cold and Vacuum Plasma Sprayed Cu-Cr-X Alloys, NiAl and NiCrAlY Coatings. Part 2; Specific Heat Capacity

NASA Technical Reports Server (NTRS)

Raj, S. V.

2017-01-01

Part I of the paper discussed the temperature dependencies of the electrical resistivities, thermal conductivities, thermal diffusivities and total hemispherical emissivities of several vacuum plasma sprayed (VPS) and cold sprayed copper alloy monolithic coatings, VPS NiAl, VPS NiCrAlY, extruded GRCop-84 and as-cast Cu-17(wt.%)Cr-5%Al. Part II discusses the temperature dependencies of the constant pressure specific heat capacities, CP, of these coatings. The data were empirically were regression-fitted with the equation: CP = AT4 + BT3 + CT2 + DT +E where T is the absolute temperature and A, B, C, D and E are regression constants. The temperature dependencies of the molar enthalpy, molar entropy and Gibbs molar free energy determined from experimental values of molar specific heat capacity are reported. Calculated values of CP using the Neumann-Kopp (NK) rule were in poor agreement with experimental data. Instead, a modification of the Neumann-Kopp rule was found to predict values closer to the experimental data with an absolute deviation less than 6.5%. The specific molar heat capacities for all the alloys did not agree with the Dulong-Petit law, and CP is greater than 3R, where R is the universal gas constant, were measured for all the alloys except NiAl for which CP is less than 3R at all temperatures.

Effect of flap design on periodontal healing after impacted third molar extraction: a systematic review and meta-analysis.

PubMed

Chen, Y-W; Lee, C-T; Hum, L; Chuang, S-K

2017-03-01

The extraction of an impacted third molar violates the surrounding soft and bony tissues. The surgeon's access to the tooth, for which there are various surgical approaches, has an important impact on the periodontium of the adjacent second molar. The aim of this review was to analyze the relationships between the different flap techniques and postoperative periodontal outcomes for the mandibular second molars (LM2) adjacent to the impacted mandibular third molars (LM3). An electronic search of MEDLINE and other databases was conducted to identify randomized controlled trials fulfilling the eligibility criteria. To assess the impact of flap design on the periodontal condition, the weighted mean difference of the probing depth reduction (WDPDR) and the weighted mean difference of the clinical attachment level gain (WDCAG) at the distal surface of LM2 were used as the primary outcomes. The results showed that, overall, the different flap techniques had no significant impact on the probing depth reduction (WDPDR -0.14mm, 95% confidence interval -0.44 to 0.17), or on the clinical attachment level gain (WDCAG 0.05mm, 95% confidence interval -0.84 to 0.94). However, a subgroup analysis revealed that the Szmyd and paramarginal flap designs may be the most effective in reducing the probing depth in impacted LM3 extraction, and the envelope flap may be the least effective. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Maxillary molar distalization with MGBM-system in class II malocclusion

PubMed Central

Maino, Giuliano; Mariani, Lisa; Bozzo, Ida; Maino, Giovanna; Caprioglio, Alberto

2013-01-01

Aims: Objective of this retrospective study was to evaluate the treatment effects of the MGBM-System (G.B Maino, A. Giannelly, R. Bernard, P. Mura), a new intraoral device to treat Class II malocclusions Materials and Methods: A retrospective study was conducted to compare the pre-distalization and post-distalization cephalograms and dental model casts of 30 patients (15 male, 15 female) with Class II malocclusion treated with MGBM-System. Mean age at the beginning of treatment was 13.3 years (standard deviation 3.3). Angular, horizontal and vertical measurements were recorded to monitor skeletal and dental-alveolar changes. Molar movements in horizontal plane were monitored by making dental measurements on dental model casts. Results: The MGBM-System produced a rapid molar distalization and Class II relationship was corrected in 8 months ± 2.05, on average. The maxillary first molars were distalized of 4.14 (PTV-6 cemento-enamel junction), associated with a significant distal axis incline of 10. 5° referred to SN and a significant intrusion of 1.3 mm (PP). As for anchorage loss, the first premolar exhibited a significant mesial movement of 0.86 mm, associated with a significant mesial axis incline of 2.46°. No significative changes in either sagittal or vertical skeletal relationship were observed. Conclusion: The results suggest that the MGBM-System is an efficient and reliable device for distalizing the maxillary permanent first and second molars. PMID:24987649

Thermophysical Properties of Cold- and Vacuum Plasma-Sprayed Cu-Cr-X Alloys, NiAl and NiCrAlY Coatings II: Specific Heat Capacity

NASA Astrophysics Data System (ADS)

Raj, S. V.

2017-11-01

Part I of the paper discussed the temperature dependencies of the electrical resistivities, thermal conductivities, thermal diffusivities and total hemispherical emissivities of several vacuum plasma-sprayed (VPS) and cold-sprayed (CS) copper alloy monolithic coatings, VPS NiAl, VPS NiCrAlY, extruded GRCop-84 and as-cast Cu-17(wt.%)Cr-5%Al. Part II discusses the temperature dependencies of the constant-pressure specific heat capacities, C P, of these coatings. The data were empirically regression-fitted with the equation: \\varvec{C}_{P} = {AT}^{4} + {BT}^{3} + {CT}^{2} + DT + \\varvec{E}where T is the absolute temperature and A, B, C, D and E are regression constants. The temperature dependencies of the molar enthalpy, molar entropy and Gibbs molar free energy determined from experimental values of molar specific heat capacity are reported. Calculated values of C P using the Neumann-Kopp (NK) rule were in poor agreement with experimental data. Instead, a modification of the NK rule was found to predict values closer to the experimental data with an absolute deviation less than 6.5%. The specific molar heat capacities for all the alloys did not agree with the Dulong-Petit law, and C P > 3 R, where R is the universal gas constant, were measured for all the alloys except NiAl for which C P < 3 R at all temperatures.

Masticatory loadings and cranial deformation in Macaca fascicularis: a finite element analysis sensitivity study.

PubMed

Fitton, L C; Shi, J F; Fagan, M J; O'Higgins, P

2012-07-01

Biomechanical analyses are commonly conducted to investigate how craniofacial form relates to function, particularly in relation to dietary adaptations. However, in the absence of corresponding muscle activation patterns, incomplete muscle data recorded experimentally for different individuals during different feeding tasks are frequently substituted. This study uses finite element analysis (FEA) to examine the sensitivity of the mechanical response of a Macaca fascicularis cranium to varying muscle activation patterns predicted via multibody dynamic analysis. Relative to the effects of varying bite location, the consequences of simulated variations in muscle activation patterns and of the inclusion/exclusion of whole muscle groups were investigated. The resulting cranial deformations were compared using two approaches; strain maps and geometric morphometric analyses. The results indicate that, with bite force magnitude controlled, the variations among the mechanical responses of the cranium to bite location far outweigh those observed as a consequence of varying muscle activations. However, zygomatic deformation was an exception, with the activation levels of superficial masseter being most influential in this regard. The anterior portion of temporalis deforms the cranial vault, but the remaining muscles have less profound effects. This study for the first time systematically quantifies the sensitivity of an FEA model of a primate skull to widely varying masticatory muscle activations and finds that, with the exception of the zygomatic arch, reasonable variants of muscle loading for a second molar bite have considerably less effect on cranial deformation and the resulting strain map than does varying molar bite point. The implication is that FEA models of biting crania will generally produce acceptable estimates of deformation under load as long as muscle activations and forces are reasonably approximated. In any one FEA study, the biological significance of the error in applied muscle forces is best judged against the magnitude of the effect that is being investigated. © 2012 The Authors. Journal of Anatomy © 2012 Anatomical Society.

Masticatory loadings and cranial deformation in Macaca fascicularis: a finite element analysis sensitivity study

PubMed Central

Fitton, L C; Shi, J F; Fagan, M J; O’Higgins, P

2012-01-01

Biomechanical analyses are commonly conducted to investigate how craniofacial form relates to function, particularly in relation to dietary adaptations. However, in the absence of corresponding muscle activation patterns, incomplete muscle data recorded experimentally for different individuals during different feeding tasks are frequently substituted. This study uses finite element analysis (FEA) to examine the sensitivity of the mechanical response of a Macaca fascicularis cranium to varying muscle activation patterns predicted via multibody dynamic analysis. Relative to the effects of varying bite location, the consequences of simulated variations in muscle activation patterns and of the inclusion/exclusion of whole muscle groups were investigated. The resulting cranial deformations were compared using two approaches; strain maps and geometric morphometric analyses. The results indicate that, with bite force magnitude controlled, the variations among the mechanical responses of the cranium to bite location far outweigh those observed as a consequence of varying muscle activations. However, zygomatic deformation was an exception, with the activation levels of superficial masseter being most influential in this regard. The anterior portion of temporalis deforms the cranial vault, but the remaining muscles have less profound effects. This study for the first time systematically quantifies the sensitivity of an FEA model of a primate skull to widely varying masticatory muscle activations and finds that, with the exception of the zygomatic arch, reasonable variants of muscle loading for a second molar bite have considerably less effect on cranial deformation and the resulting strain map than does varying molar bite point. The implication is that FEA models of biting crania will generally produce acceptable estimates of deformation under load as long as muscle activations and forces are reasonably approximated. In any one FEA study, the biological significance of the error in applied muscle forces is best judged against the magnitude of the effect that is being investigated. PMID:22690885

Synthesis of Non-Toxic Silica Particles Stabilized by Molecular Complex Oleic-Acid/Sodium Oleate

PubMed Central

Spataru, Catalin Ilie; Ianchis, Raluca; Petcu, Cristian; Nistor, Cristina Lavinia; Purcar, Violeta; Trica, Bogdan; Nitu, Sabina Georgiana; Somoghi, Raluca; Alexandrescu, Elvira; Oancea, Florin; Donescu, Dan

2016-01-01

The present work is focused on the preparation of biocompatible silica particles from sodium silicate, stabilized by a vesicular system containing oleic acid (OLA) and its alkaline salt (OLANa). Silica nanoparticles were generated by the partial neutralization of oleic acid (OLA), with the sodium cation present in the aqueous solutions of sodium silicate. At the molar ratio OLA/Na+ = 2:1, the molar ratio (OLA/OLANa = 1:1) required to form vesicles, in which the carboxyl and carboxylate groups have equal concentrations, was achieved. In order to obtain hydrophobically modified silica particles, octadecyltriethoxysilane (ODTES) was added in a sodium silicate sol–gel mixture at different molar ratios. The interactions between the octadecyl groups from the modified silica and the oleyl chains from the OLA/OLANa stabilizing system were investigated via simultaneous thermogravimetry (TG) and differential scanning calorimetry (DSC) (TG-DSC) analyses.A significant decrease in vaporization enthalpy and an increase in amount of ODTES were observed. Additionally, that the hydrophobic interaction between OLA and ODTES has a strong impact on the hybrids’ final morphology and on their textural characteristics was revealed. The highest hydrodynamic average diameter and the most negative ζ potential were recorded for the hybrid in which the ODTES/sodium silicate molar ratio was 1:5. The obtained mesoporous silica particles, stabilized by the OLA/OLANa vesicular system, may find application as carriers for hydrophobic bioactive molecules. PMID:27869768

[The influence of tobacco-smoke toxic components on glucosaminoglycans in biologic tissues].

PubMed

Zurabashvili, D Z; Chanturiia, I R; Kapanadze, L R; Kikalishvili, B Iu; Daneliia, G G

2010-04-01

The aim of the work is detailed analysis of glucosaminoglikans and glukuronic acid in chisel tooth and molars of tobacco-smokers and non-smokers. The total number of 140 patients (tobacco-smokers - 60) by acute serous pulpit is investigated. The conducted quantative and qualitative analyzes show that tobacco-smokers tooth contains les glucosaminoglikans (chondroitinsulfats A and C) and more glucuronic acid than non-smokers individuals. The chisel tooth pulp contained considerably more glucuronic acid as compared with molars. These studies support the hypothesis of important role of cigarette smoke toxical components in the tooth support mechanisms. The studies are necessary to be held in different directions.

Electrical Conductivity of Molten DyCl3-NaCl and DyCl3-KCl Systems: An Approach to Structural Interpretations of Rare Earth Chloride Melts

NASA Astrophysics Data System (ADS)

Iwadate, Yasuhiko; Ohkubo, Takahiro

2017-11-01

Electrical conductivities (κs) of molten DyCl3-NaCl and DyCl3-KCl systems were estimated by measuring the impedances of each mixture melt at any temperature and/or frequency. The molar volumes (Vms) were measured by dilatometry and represented as a polynomial empirical equation of temperature and composition. Due to both the properties, the molar conductivities (Λms) were calculated and their temperature and/or composition dependences were discussed from the standpoint of structural features as well. The κs increased curvilinearly with increasing temperature across the whole composition ranges. This trend was also applied to the Λms which was fitted by an Arrhenius-type equation. The relationship of Λms with melt composition was studied and the Λms were found to decrease with increasing composition of DyCl3. These findings were interpreted based on the results of structural science so far reported, and finally, the relationship between Λms and the structures of pure rare earth chloride melts was discussed.

Effectiveness of Antimicrobial Therapy after Extraction of Impacted Mandibular Third Molar: A Randomized Clinical Trial.

PubMed

Rabi, A; Maheshwari, Rahul; Srinivasan, Bhuvaneshwari; Warad, Lata P; Suvarna, C C; Tank, Kartik S

2018-01-01

The present study was conducted with the aim of evaluating the effectiveness of antimicrobial therapy following extraction of an impacted mandibular third molar. This randomized controlled trial was conducted on a total of 60 patients who were randomly assigned into three groups: Group I individuals were given 625 mg of combined amoxicillin and clavulanic acid tablet; 625 mg of combined amoxicillin and clavulanic acid tablet + 400 mg metronidazole tablet was given to group II individuals; whereas group III individuals were assigned no treatment. All the individuals underwent surgical extraction of impacted mandibular third molars under strict aseptic techniques, with minimal trauma to the surrounding tissues. Mouth opening in millimeters was recorded postoperatively using Vernier calipers on the 1st, 3rd, 5th, and 7th days. A 4-point visual analog scale (VAS) was used for assessing postoperative pain. Patient satisfaction was further assessed in a subjective manner using a graded scale from "very satisfied" to "very unsatisfied". The present study included individuals between the ages of 20 and 35 years. Group II individuals showed slightly better satisfaction than the other group individuals. There was no statistically significant difference between the mean age of groups. It was observed that on day 3, the number of individuals with severe pain was slightly reduced in the group I compared with group III individuals. On day 5, participants with no pain were significantly more in group II followed by group I. Furthermore, there was a statistically significant difference between the study groups with respect to mouth opening on days 3 and 5. It was concluded from this trial that the administration of postoperative antimicrobials showed no significant differences in the degree of postoperative complications that occur following the surgical extraction of impacted mandibular third molars. Antimicrobial drugs are routinely used to reduce the chances of surgical site infection, either preopera-tively or postoperatively. Therefore, the clinicians should have sound knowledge about choosing the better antimicrobial drug after the extraction of impacted third molars.

Melting relations in the MgO-MgSiO3 system up to 70 GPa

NASA Astrophysics Data System (ADS)

Ohnishi, Satoka; Kuwayama, Yasuhiro; Inoue, Toru

2017-06-01

Melting experiments in a binary system MgO-MgSiO3 were performed up to 70 GPa using a CO2 laser heated diamond anvil cell. The quenched samples were polished and analyzed by a dualbeam focused ion beam (FIB) and a field emission scanning electron microscope (FE-SEM), respectively. The liquidus phase and the eutectic composition were determined on the basis of textual and chemical analyses of sample cross sections. Our experimental results show that the eutectic composition is the Si/Mg molar ratio of 0.76 at 35 GPa and it decreases with increasing pressure. Above 45 GPa, it becomes relatively constant at about 0.64-0.65 Si/Mg molar ratio. Using our experimental data collected at a wide pressure range up to 70 GPa together with previous experimental data, we have constructed a thermodynamic model of the eutectic composition of the MgO-MgSiO3 system. The eutectic composition extrapolated to the pressure and temperature conditions at the base of the mantle is about 0.64 Si/Mg molar ratio. The modeled eutectic composition is quite consistent with a previous prediction from ab initio calculations (de Koker et al. in Earth Planet Sci Lett 361:58-63, 2013), suggesting that the simple assumption of a non-ideal regular solution model can well describe the melting relation of the MgO-MgSiO3 system at high pressure. Our results show that the liquidus phase changes from MgO-periclase to MgSiO3-bridgmanite at 35 GPa for the simplified pyrolite composition ( 0.7 Si/Mg molar ratio), while MgSiO3-bridgmanite is the liquidus phase at the entire lower mantle conditions for the chondritic composition ( 0.84 Si/Mg molar ratio).

Structural and Magnetic Properties of {Eu}(3+) Eu 3 + -Doped {CdNb}_{2} {O}_{6} CdNb 2 O 6 Powders

NASA Astrophysics Data System (ADS)

Topkaya, Ramazan; Boyraz, Cihat; Ekmekçi, Mete Kaan

2018-03-01

Europium-doped CdNb2O6 powders with the molar concentration of Eu^{3+} (0.5, 3 and 6 mol%) were successfully prepared at 900°C by using molten salt synthesis method. The effect of europium (Eu) molar concentration on the structural and temperature-dependent magnetic properties of CdNb2O6 powders has been investigated by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), vibrating sample magnetometer (VSM) and ferromagnetic resonance (FMR) techniques in the temperature range of 10-300 K. XRD results confirm that all the powders have orthorhombic crystal structure. It has been confirmed from VSM and FMR measurements that Eu^{3+}-doped CdNb2O6 powders have ferromagnetic behaviour for each Eu^{3+} molar concentration between 10 and 300 K. XRD and EDX analyses indicate that there is no magnetic impurity in Eu^{3+}-doped CdNb_2O_6 powders, supporting that the ferromagnetic behaviour of the powders arises from Eu^{3+} ions. The observed ferromagnetism was elucidated with the intrinsic exchange interactions between the magnetic moments associated with the unpaired 4 f electrons in Eu^{3+} ions. The saturation magnetization decreases with increasing Eu^{3+} molar concentration. The temperature-dependent magnetization behaviour was observed not to agree with Curie-Weiss law because europium obeys Van Vleck paramagnetism. Broad FMR spectra and a g-value higher than 2 were observed from FMR measurements, indicating the ferromagnetic behaviour of the powders. It was found that while the resonance field of FMR spectra decreases, the linewidth increases as a function of Eu^{3+} molar concentration.

Does fluoride in drinking water delay tooth eruption?

PubMed

Jolaoso, Ismail Adeyemi; Kumar, Jayanth; Moss, Mark E

2014-01-01

The objectives of this study are to determine the effect of fluoride exposure on permanent tooth eruption patterns as well as to understand its effect on caries attack rate by accounting for the number of erupted tooth surfaces. We analyzed data from the 1986-1987 National Survey of Oral Health of US Schoolchildren to determine the mean number of erupted permanent teeth and permanent first molars according to fluoride level in drinking water. The analysis included 13,348 children aged 5-17 years with a history of single residence. We also estimated the attack rate (decayed, missing, and filled surfaces/surfaces at risk) for fluoride deficient, suboptimal, and optimally fluoridated areas adjusting for covariates. Multivariable statistical analyses were performed to control for potential confounders. By age 7, almost all permanent first molars had erupted. The adjusted mean number of erupted permanent first molars per child were 3.81, 3.67, and 3.92 in areas with <0.3, 0.3-<0.7, and 0.7-1.2 ppm of fluoride, respectively. The adjusted caries attack rate in the first permanent molars among 5- to 17-year-old children was 93, 81, and 78 per 1,000 surfaces in fluoride deficient, suboptimal, and optimally fluoridated areas, respectively (P < 0.0001). This pattern of higher first molar attack rate among children in the fluoride-deficient communities was also observed in all erupted teeth. Exposure to fluoride in drinking water did not delay the eruption of permanent teeth. The observed difference in dental caries experience among children exposed to different fluoride levels could not be explained by the timing of eruption of permanent teeth. © 2014 American Association of Public Health Dentistry.

Carabelli's trait revisited: an examination of mesiolingual features at the enamel-dentine junction and enamel surface of Pan and Homo sapiens upper molars.

PubMed

Ortiz, Alejandra; Skinner, Matthew M; Bailey, Shara E; Hublin, Jean-Jacques

2012-10-01

Carabelli's trait is a morphological feature that frequently occurs on the mesiolingual aspect of Homo sapiens upper molars. Similar structures also referred to as Carabelli's trait have been reported in apes and fossil hominins. However, the morphological development and homology of these mesiolingual structures among hominoids are poorly understood. In this study, we employ micro-computed tomography to image the enamel-dentine junction (EDJ) and outer enamel surface (OES) of Pan (n = 48) and H. sapiens (n = 52) upper molars. We investigate the developmental origin of mesiolingual features in these taxa and establish the relative contribution of the EDJ and enamel cap to feature expression. Results demonstrate that mesiolingual features of H. sapiens molars develop at the EDJ and are similarly expressed at the OES. Morphological variation at both surfaces in this taxon can satisfactorily be assessed using standards for Carabelli's trait developed by the Arizona State University Dental Anthropology System (ASUDAS). Relative to H. sapiens, Pan has an even greater degree of correspondence in feature expression between the EDJ and OES. Morphological manifestations in Pan molars are not necessarily limited to the protocone and are best characterized by a lingual cingulum that cannot be captured by the ASUDAS. Cusp-like structures, similar to those seen in marked Carabelli's trait expressions in H. sapiens, were not found in Pan. This study provides a foundation for further analyses on the evolutionary history of mesiolingual dental traits within the hominoid lineage. It also highlights the wealth of morphological data that can be obtained at the EDJ for understanding tooth development and for characterizing tooth crown variation in worn fossil teeth. Copyright © 2012 Elsevier Ltd. All rights reserved.

Spectroscopic, thermal, catalytic and biological studies of Cu(II) azo dye complexes

NASA Astrophysics Data System (ADS)

El-Sonbati, A. Z.; Diab, M. A.; El-Bindary, A. A.; Shoair, A. F.; Hussein, M. A.; El-Boz, R. A.

2017-08-01

New complexes of copper(II) with azo compounds of 5-amino-2-(aryl diazenyl)phenol (HLn) are prepared and investigated by elemental analyses, molar conductance, IR, 1H NMR, UV-Visible, mass, ESR spectra, magnetic susceptibility measurements and thermal analyses. The complexes have a square planar structure and general formula [Cu(Ln)(OAc)]H2O. Study the catalytic activities of Cu(II) complexes toward oxidation of benzyl alcohol derivatives to carbonyl compounds were tested using H2O2 as the oxidant. The intrinsic binding constants (Kb) of the ligands (HLn) and Cu(II) complexes (1-4) with CT-DNA are determined. The formed compounds have been tested for biological activity of antioxidants, antibacterial against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and yeast Candida albicans. Antibiotic (Ampicillin) and antifungal against (Colitrimazole) and cytotoxic compounds HL1, HL2, HL3 and complex (1) showed moderate to good activity against S. aureus, E. coli and Candida albicans, and also to be moderate on antioxidants and toxic substances. Molecular docking is used to predict the binding between the ligands with the receptor of breast cancer (2a91).

Synthesis and characterization of tin(II) complexes of fluorinated Schiff bases derived from amino acids.

PubMed

Singh, Har Lal

2010-07-01

New tin(II) complexes of general formula Sn(L)(2) (L=monoanion of 3-methyl-4-fluoro-acetophenone phenylalanine L(1)H, 3-methyl-4-fluoro-acetophenone alanine L(2)H, 3-methyl-4-fluoro acetophenone tryptophan L(3)H, 3-methyl-4-fluoro-acetophenone valine L(4)H, 3-methyl-4-fluoro-acetophenone isoleucine L(5)H and 3-methyl-4-fluoro-acetophenone glycine L(6)H) have been prepared. It is characterized by elemental analyses, molar conductance measurements and molecular weight determinations. Bonding of these complexes is discussed in terms of their UV-visible, infrared, and nuclear magnetic resonance ((1)H, (13)C, (19)F and (119)Sn NMR) spectral studies. The ligands act as bidentate towards metal ions, via the azomethine nitrogen and deprotonated oxygen of the respective amino acid. Elemental analyses and NMR spectral data of the ligands with their tin(II) complexes agree with their proposed square pyramidal structures. A few representative ligands and their tin complexes have been screened for their antibacterial activities and found to be quite active in this respect. Copyright 2010 Elsevier B.V. All rights reserved.

Comparative Study on Corrosion Protection of Reinforcing Steel by Using Amino Alcohol and Lithium Nitrite Inhibitors

PubMed Central

Lee, Han-Seung; Ryu, Hwa-Sung; Park, Won-Jun; Ismail, Mohamed A.

2015-01-01

In this study, the ability of lithium nitrite and amino alcohol inhibitors to provide corrosion protection to reinforcing steel was investigated. Two types of specimens—reinforcing steel and a reinforced concrete prism that were exposed to chloride ion levels resembling the chloride attack environment—were prepared. An autoclave accelerated corrosion test was then conducted. The variables tested included the chloride-ion concentration and molar ratios of anti-corrosion ingredients in a CaOH2-saturated aqueous solution that simulated a cement-pore solution. A concentration of 25% was used for the lithium nitrite inhibitor LiNO2, and an 80% solution of dimethyl ethanolamine ((CH3)2NCH2CH2OH, hereinafter DMEA) was used for the amino alcohol inhibitor. The test results indicated that the lithium nitrite inhibitor displayed anti-corrosion properties at a molar ratio of inhibitor of ≥0.6; the amino alcohol inhibitor also displayed anti-corrosion properties at molar ratios of inhibitor greater than approximately 0.3. PMID:28787936

Syntheses and structural analyses of cocondensed resins from urea and methylolphenols

Treesearch

Bunchiro Tomita; Chung-Yun Hse

1993-01-01

The reactions of urea with polymethylolphenol mixtures in acidic states were investigated by changing the reaction condition such as the molar ratio and acidity. The cocondensates were analyzed with carbon 13 nuclear magnetic resonance (13C-NMR) spectroscopy and gel permeation chromatography(GPC). The quantity of each chemical structure in the...

Getting the Most out of Electrophoresis Units

ERIC Educational Resources Information Center

Mulvihill, Charlotte

2007-01-01

At Oklahoma City Community College, they have developed gel electrophoresis activities that support active learning of many scientific concepts, including: pH, electrolysis, oxidation reduction, electrical currents, potentials, conductivity, molarity, gel electrophoresis, DNA and protein separation, and DNA fingerprinting. This article presents…

Evaluation of Buccal Infiltration with Articaine and Inferior Alveolar Nerve Block with Lignocaine for Pulp Therapy in Mandibular Primary Molars.

PubMed

Chopra, Radhika; Marwaha, Mohita; Bansal, Kalpana; Mittal, Meenu

2016-01-01

Failure of inferior alveolar nerve block in achieving profound anesthesia of the pulp due to various reasons has led to the introduction of more potent local anesthetic agents like articaine. This study was conducted to compare the efficacy of buccal infiltration with articaine in achieving pulpal anesthesia of primary molars as compared to inferior alveolar nerve block with lignocaine. 30 patients (4-8 years) with indication of pulp therapy in at least two mandibular primary molars were selected. Patients were randomly assigned to receive nerve block with lignocaine or infiltration with articaine on first appointment and the other solution on second appointment. All the pulpotomies and pulpectomies were performed by a pediatric dentist. Two researchers standing at a distance of 1.5 m recorded the Pain Scores and Sound, Eye, Motor (SEM) scores. After the completion of procedure, the patient was asked to record the Facial Image score and Heft-Parker Visual Analogue Score (HP-VAS). Pain Score recorded at the time of injection showed significantly more movements with block as compared to infiltration (p<0.001). SEM scores at time of pulp extirpation were also higher for block than infiltration (p<0.001). Articaine infiltration has the potential to replace inferior alveolar nerve block for primary mandibular molars.

Thermally conductive polymers

NASA Technical Reports Server (NTRS)

Byrd, N. R.; Jenkins, R. K.; Lister, J. L. (Inventor)

1971-01-01

A thermally conductive polymer is provided having physical and chemical properties suited to use as a medium for potting electrical components. The polymer is prepared from hydroquinone, phenol, and formaldehyde, by conventional procedures employed for the preparation of phenol-formaldehyde resins. While the proportions of the monomers can be varied, a preferred polymer is formed from the monomers in a 1:1:2.4 molar or ratio of hydroquinone:phenol:formaldehyde.

Synthesis, spectroscopic, thermogravimetric and antimicrobial studies of mixed ligands complexes

NASA Astrophysics Data System (ADS)

Mahmoud, Walaa H.; Mahmoud, Nessma F.; Mohamed, Gehad G.; El-Sonbati, Adel Z.; El-Bindary, Ashraf A.

2015-09-01

An interesting series of mixed ligand complexes have been synthesized by the reaction of metal chloride with guaifenesin (GFS) in the presence of 2-aminoacetic acid (HGly) (1:1:1 molar ratio). The elemental analysis, magnetic moments, molar conductance, spectral (UV-Vis, IR, 1H NMR and ESR) and thermal studies were used to characterize the isolated complexes. The molecular structure of GFS is optimized theoretically and the quantum chemical parameters are calculated. The IR showed that the ligand (GFS) acts as monobasic tridentate through the hydroxyl, phenoxy etheric and methoxy oxygen atoms and co-ligand (HGly) as monobasic bidentate through the deprotonated carboxylate oxygen atom and nitrogen atom of amino group. The molar conductivities showed that all the complexes are non-electrolytes except Cr(III) complex is electrolyte. Electronic and magnetic data proposed the octahedral structure for all complexes under investigation. ESR spectrum for Cu(II) revealed data which confirm the proposed structure. Antibacterial screening of the compounds were carried out in vitro on gram positive (Bacillus subtilis and Staphylococcus aureus), gram negative (Escherichia coli and Neisseria gonorrhoeae) bacteria and for in vitro antifungal activity against Candida albicans organism. However, some complexes showed more chemotherapeutic efficiency than the parent GFS drug. The complexes were also screened for their in vitro anticancer activity against the breast cell line (MFC7) and the results obtained showed that they exhibit a considerable anticancer activity.

Strength Performance of Blended Ash Based Geopolymer Mortar

NASA Astrophysics Data System (ADS)

Zahib, Zaidahtulakmal M.; Kamaruddin, Kartini; Saman, Hamidah M.

2018-03-01

Geopolymer is a based on inorganic alumino-silicate binder system. Geopolymeric materials are formed using materials that containing silica and aluminium such as fly ash and rice husk ash, which activated by alkaline solution. This paper presents the study on the effect of replacement of SSA in RHA based geopolymer, types of curing and different molarity of NaOH used on the strength of Sewage Sludge Ash (SSA) and Rice Husk Ash (RHA) based geopolymer mortar incorporating with three (3) different mix proportions. Based geopolymer mortar was synthesized from treated sewage sludge and rice husk undergoing incineration process in producing ashes, activated with sodium silicate and sodium hydroxide solution by ratio of 2.5:1 and solution to ash ratio of 1:1. Molarity of 8M and 10M NaOH were used. The percentages of SSA replacement were 0%, 10% and 20% by weight. Compressive strength was conducted at age 7, 14 and 28 days to see the development of strength with two curing regimes, which are air curing and oven curing (60°C for 24 hours). From the research conducted, the ultimate compressive strength (6.28MPa) was obtained at zero replacement of SSA taken at 28 days of oven curing with 10M of NaOH. This shows that RHA, which is rich in silica content is enough to enhance the strength of geopolymer mortar especially with high molarity of NaOH.

Synthesis, spectroscopic, molecular orbital calculation, cytotoxic, molecular docking of DNA binding and DNA cleavage studies of transition metal complexes with N-benzylidene-N'-salicylidene-1,1-diaminopropane

NASA Astrophysics Data System (ADS)

Al-Mogren, Muneerah M.; Alaghaz, Abdel-Nasser M. A.; Elbohy, Salwa A. H.

2013-10-01

Eight mononuclear chromium(III), manganese(II), iron(III), cobalt(II), nickel(II), copper(II), zinc(II) and cadmium(II) complexes of Schiff's base ligand were synthesized and determined by different physical techniques. The complexes are insoluble in common organic solvents but soluble in DMF and DMSO. The measured molar conductance values in DMSO indicate that the complexes are non-electrolytic in nature. All the eight metal complexes have been fully characterized with the help of elemental analyses, molecular weights, molar conductance values, magnetic moments and spectroscopic data. The analytical data helped to elucidate the structure of the metal complexes. The Schiff base is found to act as tridentate ligand using N2O donor set of atoms leading to an octahedral geometry for the complexes around all the metal ions. Quantum chemical calculations were performed with semi-empirical method to find the optimum geometry of the ligand and its complexes. Additionally in silico, the docking studies and the calculated pharmacokinetic parameters show promising futures for application of the ligand and complexes as high potency agents for DNA binding activity. The interaction of the complexes with calf thymus DNA (CT-DNA) has been investigated by UV absorption method, and the mode of CT-DNA binding to the complexes has been explored. Furthermore, the DNA cleavage activity by the complexes was performed. The Schiff base and their complexes have been screened for their antibacterial activity against bacterial strains [Staphylococcus aureus (RCMB010027), Staphylococcus epidermidis (RCMB010024), Bacillis subtilis (RCMB010063), Proteous vulgaris (RCMB 010085), Klebsiella pneumonia (RCMB 010093) and Shigella flexneri (RCMB 0100542)] and fungi [(Aspergillus fumigates (RCMB 02564), Aspergillus clavatus (RCMB 02593) and Candida albicans (RCMB05035)] by disk diffusion method. All the metal complexes have potent biocidal activity than the free ligand.

Structural, spectroscopic and thermal characterization of 2-tert-butylaminomethylpyridine-6-carboxylic acid methylester and its Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and UO(2)(II) complexes.

PubMed

Mohamed, Gehad G; El-Gamel, Nadia E A

2005-04-01

Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and UO(2)(II) complexes with the ligand 2-tert-butylaminomethylpyridine-6-carboxylic acid methylester (HL(2)) have been prepared and characterized by elemental analyses, molar conductance, magnetic moment, thermal analysis and spectral data. 1:1 M:HL(2) complexes, with the general formula [M(HL(2))X(2)].nH(2)O (where M = Co(II) (X = Cl, n = 0), Ni(II) (X = Cl, n = 3), Cu(II) (grey colour, X = AcO, n = 1), Cu(II) (yellow colour, X = Cl, n = 0) and Zn(II) (X = Br, n = 0). In addition, the Fe(III) and UO(2)(II) complexes of the type 1:2 M:HL(2) and with the formulae [Fe(L(2))(2)]Cl and [UO(2)(HL(2))(2)](NO(3))(2) are prepared. From the IR data, it is seen that HL(2) ligand behaves as a terdentate ligand coordinated to the metal ions via the pyridyl N, carboxylate O and protonated NH group; except the Fe(III) complex, it coordinates via the deprotonated NH group. This is supported by the molar conductance data, which show that all the complexes are non-electrolytes, while the Fe(III) and UO(2)(II) complexes are 1:1 electrolytes. IR and H1-NMR spectral studies suggest a similar behaviour of the Zn(II) complex in solid and solution states. From the solid reflectance spectral data and magnetic moment measurements, the complexes have a trigonal bipyramidal (Co(II), Ni(II), Cu(II) and Zn(II) complexes) and octahedral (Fe(III), UO(2)(II) complexes) geometrical structures. The thermal behaviour of the complexes is studied and the different dynamic parameters are calculated applying Coats-Redfern equation.

The effectiveness and cost-effectiveness of prophylactic removal of wisdom teeth.

PubMed

Song, F; O'Meara, S; Wilson, P; Golder, S; Kleijnen, J

2000-01-01

Removal of wisdom teeth is one of the most common surgical procedures performed in the UK. Little controversy surrounds the removal of impacted third molars when they are associated with pathological changes such as infection, non-restorable carious lesions, cysts, tumours, and destruction of adjacent teeth and bone. However, the justification for prophylactic removal of impacted third molars is less certain and has been debated for many years. To provide a summary of existing evidence on prophylactic removal of impacted wisdom teeth, in terms of the incidence of surgical complications associated with prophylactic removal, and the morbidity associated with retention. A systematic review of the research literature was undertaken. METHODS - DATA SOURCES: An existing review formed the basis of this report, and additional literature searches were undertaken, including searches of electronic databases (MEDLINE, 1984-99; EMBASE, 1984-99; Science Citation Index, Cochrane Controlled Trials Register, National Research Register; Database of Abstracts of Reviews of Effectiveness), paper sources (including Clinical Evidence), and web-based resources. Relevant organisations and professional bodies were contacted for further information. Studies were selected for inclusion if they met the following criteria: (1) design - randomised controlled trials (RCTs), literature reviews, or decision analyses; (2) participants - people with unerupted or impacted third molars, or those undergoing surgical removal of third molars either as prophylaxis or due to associated pathological changes; (3) reported outcomes - either the pathological changes associated with retention of third molars, or post-operative complications following extraction. There were no language restrictions on study selection. METHODS - DATA EXTRACTION AND SYNTHESIS: Data from included studies were extracted into structured tables and individual study validity was assessed against methodological checklists. Data were summarised descriptively. Decisions relating to study selection, data extraction and validity assessment were made by two independent reviewers, and disagreements were resolved by discussion. For non-English papers, translators were recruited to assist with study selection and data extraction. Forty studies were included in the review: two RCTs, 34 literature reviews, and four decision analysis studies. One RCT in the UK focused on the effects of retained third molars on incisor crowding (predominantly a cosmetic problem) in patients who had previously undergone orthodontic treatment. The results of this trial suggested that the removal of third molars to prevent late incisor crowding cannot be justified. Another on-going RCT in Denmark compares the effects and costs of prophylactic removal of third molars with removal according to morbidity. So far, this trial has recruited 200 participants, and preliminary results indicate that watchful waiting may be a promising strategy. However, more data and longer follow-up of patients are needed to conclude which treatment strategy is the most cost-effective. It is also known that a trial is on-going in the USA but no results are available so far. The methodological quality of the literature reviews was generally poor, and none of the reviews was systematic. Conclusions from nine reviews on anterior crowding suggested that there was only a weak association between retention of third molars and crowding. Six out of 21 reviews with a more general scope also concluded that the prophylactic removal of third molars was unjustified. Twelve general reviews did not conclude with a clear message about the management of third molars. Three reviews suggested that prophylactic removal of third molars is appropriate, but these reviews were of poorer methodological quality than the majority of other reviews. Three out of four papers focusing on surgical management expressed

Potential Moderating Effects of Selenium on Mercury Uptake and Selenium:Mercury Molar Ratios in Fish From Oak Ridge and Savannah River Site - 12086

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burger, Joanna; Gochfeld, Michael; Donio, Mark

2012-07-01

Mercury contamination is an important remediation issue at the U.S. Department of Energy's (DOE) Oak Ridge Reservation and to a lesser extent at other DOE sites because of the hazard it presents, potential consequences to humans and eco-receptors, and completed pathways, to offsite receptors. Recent work has emphasized that selenium might ameliorate the toxicity of mercury, and we examine the selenium:mercury (Se:Hg) molar ratios in fish from Oak Ridge, and compare them to Se:Hg molar ratios in fish from the Savannah River. Selenium/mercury molar ratios varied considerably among and within fish species. There was considerable variation in the molar ratiosmore » for individual fish (as opposed to mean ratios by species) for freshwater fish from both sites. The inter-individual variation in molar ratios indicates that such that the molar ratios of mean Se and Hg concentrations may not be representative. Even for fish species with relatively low mercury levels, some individual fish have molar ratios less than unity, the value sometime thought to be protective. Selenium levels varied narrowly regardless of fish size, consistent with homeostatic regulation of this essential trace element. The data indicate that considerable attention will need to be directed toward variations and variances, as well as the mechanisms of the interaction of selenium and mercury, before risk assessment and risk management policies can use this information to manage mercury pollution and risk. Even so, if there are high levels of selenium in the fish from Poplar Creek on Oak Ridge, then the potential exists for some amelioration of adverse health effects, on the fish themselves, predators that eat them, and people who consume them. This work will aid DOE because it will allow managers and scientists to understand another aspect that affects fate and transport of mercury, as well as the potential effects of methylmercury in fish for human and ecological receptors. The variability within fish species, however, suggests that the relative Se:Hg molar ratios in fish are not stable enough to be used in risk assessment at this time. Nor is it known how much excess selenium is required to confer any degree of protectiveness. That is, in conducting risk assessments, it is not possible to determine the spread of ratios, which would be needed for probabilistic risk assessment. Significantly more fish samples per species are required to begin to generate data that would allow it use in risk assessment. Adding Se:Hg molar ratios seems to complicate risk assessment for the potential adverse effects of mercury exposure, and using mercury levels at this time remains the most viable option. (authors)« less

Age estimation based on pulp chamber volume of first molars from cone-beam computed tomography images.

PubMed

Ge, Zhi-pu; Ma, Ruo-han; Li, Gang; Zhang, Ji-zong; Ma, Xu-chen

2015-08-01

To establish a method that can be used for human age estimation on the basis of pulp chamber volume of first molars and to identify whether the method is good enough for age estimation in real human cases. CBCT images of 373 maxillary first molars and 372 mandibular first molars were collected to establish the mathematical model from 190 female and 213 male patients whose age between 12 and 69 years old. The inclusion criteria of the first molars were: no caries, no excessive tooth wear, no dental restorations, no artifacts due to metal restorative materials present in adjacent teeth, and no pulpal calcification. All the CBCT images were acquired with a CBCT unit NewTom VG (Quantitative Radiology, Verona, Italy) and reconstructed with a voxel-size of 0.15mm. The images were subsequently exported as DICOM data sets and imported into an open source 3D image semi-automatic segmenting and voxel-counting software ITK-SNAP 2.4 for the calculation of pulp chamber volumes. A logarithmic regression analysis was conducted with age as dependent variable and pulp chamber volume as independent variables to establish a mathematical model for the human age estimation. To identify the precision and accuracy of the model for human age estimation, another 104 maxillary first molars and 103 mandibular first molars from 55 female and 57 male patients whose age between 12 and 67 years old were collected, too. Mean absolute error and root mean square error between the actual age and estimated age were used to determine the precision and accuracy of the mathematical model. The study was approved by the Institutional Review Board of Peking University School and Hospital of Stomatology. A mathematical model was suggested for: AGE=117.691-26.442×ln (pulp chamber volume). The regression was statistically significant (p=0.000<0.01). The coefficient of determination (R(2)) was 0.564. There is a mean absolute error of 8.122 and root mean square error of 5.603 between the actual age and estimated age for all the tested teeth. The pulp chamber volume of first molar is a useful index for the estimation of human age with reasonable precision and accuracy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Electronic and thermal properties of non-stoichiometric and doped cobaltum antimonide

NASA Astrophysics Data System (ADS)

Velasco-Soto, Diego; Menéndez-Proupin, Eduardo; Realyvazquez-Guevara, Rebeca; Andrés Matutes-Aquino, José

2018-02-01

The electronic, vibrational and thermal properties of stoichiometric and non-stoichiometric cobalt antimonide CoSb x (x = 2.81, 2.875, and 3) are investigated by means of first principle calculations and thermal measurements. The molar heat capacity, electrical conductivity, and the electronic thermal conductivity are increased by the effect of Sb vacancies. Doping with Te and Ge also increases the electrical and thermal conductivity, suggesting that it can be used to enhance cobaltum antimonide as a thermoelectric material.

Prevalence of missing and impacted third molars in adults aged 25 years and above

PubMed Central

Jung, Yun-Hoa

2013-01-01

Purpose The purpose of this study was to determine the prevalence of missing and impacted third molars in people aged 25 years and above. Materials and Methods The study sample of 3,799 patients was chosen randomly from patients who visited Pusan National University Dental Hospital and had panoramic radiographs taken. The data collected included presence and impaction state, angulation, and depth of impaction of third molars, and radiographically detected lesions of third molars and adjacent second molars. Results A greater percentage of men than women retained at least one third molar. The incidence of third molars decreased with increasing age. The incidence of partially impacted third molars greatly declined after the age of 30. Vertically impacted maxillary third molars and horizontally impacted mandibular third molars were most frequent in all age groups. Among the maxillary third molars, those impacted below the cervical line of the second molar were most frequent in all age groups, and among the mandibular third molars, deeply impacted third molars were most frequent in those aged over 40. Dental caries was the most common radiographic lesion of the third molars. Mesioangularly impacted third molars showed radiographic lesions in 13 (9.5%) adjacent maxillary second molars and 117 (27.4%) mandibular second molars. Conclusion The number of remaining third molars decreased and the percentage of Class C depth increased with age. Caries was the most frequent lesion in third molars. Partially impacted mesioangular third molars showed a high incidence of caries or periodontal bone loss of the adjacent second molar. Regular oral examination will be essential to keep asymptomatic third molars in good health. PMID:24380060

Correlation between chronological age and third molar developmental stages in an Iranian population (Demirjian method)

PubMed Central

Khosronejad, Aria; Navabi, Manijeh; Sakhdari, Shirin; Rakhshan, Vahid

2017-01-01

Background: Third molar development is the only available tool for estimating the age of individuals after puberty. Since this tooth has very high interethnic variability, formulas calculated to estimate the age from its development stages cannot be generalized to other populations and should be adjusted for each region. Therefore, this study was conducted to evaluate this method in a sample of Tehran individuals for the first time, and also to compare the development of third molars across sexes and arches, and to estimate cutoff developmental stages for legal minor/major identification. Materials and Methods: A total of 150 dental patients aged between 15 and 25 years old were prospectively enrolled, and their Demirjian stages were recorded. The associations between chronological age and Demirjian stages were evaluated. Dental formation was compared between sexes and jaws. Cutoff stages were determined to identify legal minor/major cases (above or below 18 years old). Age estimation formula was found for this population. Results: Of the 150 included patients, 56 were males. The difference between the ages of males and females at each given developmental stage was nonsignificant (P > 0.05), except for the H stage. Age difference between same stage teeth of the maxilla and mandible was nonsignificant. Each of the G and H stages was significantly above 18 years old (P < 0.001). Furthermore, E and F stages were below 18 years old (P < 0.001). All the correlations between Demirjian stages and age were above 90% (all P < 0.001). Third molar development was positively affected by the chronological age (P = 0.000) and being maxillary (P = 0.000) but not sex (P = 0.113). Regression formula for age estimation was: age = 6.52+ (0.64 × sex) + (0.32 × arch) + (1.86 × Demirjian stage). Conclusion: Development of third molar might complete after the age 22. Iranian individuals with third molars at the G and H stages are likely above 18 while those at E and F are likely below 18. Pace of molar development differs for jaws, but intergender differences are open to further investigations. PMID:28584539

Correlation between chronological age and third molar developmental stages in an Iranian population (Demirjian method).

PubMed

Khosronejad, Aria; Navabi, Manijeh; Sakhdari, Shirin; Rakhshan, Vahid

2017-01-01

Third molar development is the only available tool for estimating the age of individuals after puberty. Since this tooth has very high interethnic variability, formulas calculated to estimate the age from its development stages cannot be generalized to other populations and should be adjusted for each region. Therefore, this study was conducted to evaluate this method in a sample of Tehran individuals for the first time, and also to compare the development of third molars across sexes and arches, and to estimate cutoff developmental stages for legal minor/major identification. A total of 150 dental patients aged between 15 and 25 years old were prospectively enrolled, and their Demirjian stages were recorded. The associations between chronological age and Demirjian stages were evaluated. Dental formation was compared between sexes and jaws. Cutoff stages were determined to identify legal minor/major cases (above or below 18 years old). Age estimation formula was found for this population. Of the 150 included patients, 56 were males. The difference between the ages of males and females at each given developmental stage was nonsignificant ( P > 0.05), except for the H stage. Age difference between same stage teeth of the maxilla and mandible was nonsignificant. Each of the G and H stages was significantly above 18 years old ( P < 0.001). Furthermore, E and F stages were below 18 years old ( P < 0.001). All the correlations between Demirjian stages and age were above 90% (all P < 0.001). Third molar development was positively affected by the chronological age ( P = 0.000) and being maxillary ( P = 0.000) but not sex ( P = 0.113). Regression formula for age estimation was: age = 6.52+ (0.64 × sex) + (0.32 × arch) + (1.86 × Demirjian stage). Development of third molar might complete after the age 22. Iranian individuals with third molars at the G and H stages are likely above 18 while those at E and F are likely below 18. Pace of molar development differs for jaws, but intergender differences are open to further investigations.

Piezoelectric Versus Conventional Rotary Techniques for Impacted Third Molar Extraction

PubMed Central

Jiang, Qian; Qiu, Yating; Yang, Chi; Yang, Jingyun; Chen, Minjie; Zhang, Zhiyuan

2015-01-01

Abstract Impacted third molars are frequently encountered in clinical work. Surgical removal of impacted third molars is often required to prevent clinical symptoms. Traditional rotary cutting instruments are potentially injurious, and piezosurgery, as a new osteotomy technique, has been introduced in oral and maxillofacial surgery. No consistent conclusion has been reached regarding whether this new technique is associated with fewer or less severe postoperative sequelae after third molar extraction. The aim of this study was to compare piezosurgery with rotary osteotomy techniques, with regard to surgery time and the severity of postoperative sequelae, including pain, swelling, and trismus. We conducted a systematic literature search in the Cochrane Library, PubMed, Embase, and Google Scholar. The eligibility criteria of this study included the following: the patients were clearly diagnosed as having impacted mandibular third molars; the patients underwent piezosurgery osteotomy, and in the control group rotary osteotomy techniques, for removing impacted third molars; the outcomes of interest include surgery time, trismus, swelling or pain; the studies are randomized controlled trials. We used random-effects models to calculate the difference in the outcomes, and the corresponding 95% confidence interval. We calculated the weighted mean difference if the trials used the same measurement, and a standardized mean difference if otherwise. A total of seven studies met the eligibility criteria and were included in our analysis. Compared with rotary osteotomy, patients undergoing piezosurgery experienced longer surgery time (mean difference 4.13 minutes, 95% confidence interval 2.75–5.52, P < 0.0001). Patients receiving the piezoelectric technique had less swelling at postoperative days 1, 3, 5, and 7 (all Ps ≤0.023). Additionally, there was a trend of less postoperative pain and trismus in the piezosurgery groups. The number of included randomized controlled trials and the sample size of each trial were relatively small, double blinding was not possible, and cost analysis was unavailable due to a lack of data. Our meta-analysis indicates that although patients undergoing piezosurgery experienced longer surgery time, they had less postoperative swelling, indicating that piezosurgery is a promising alternative technique for extraction of impacted third molars. PMID:26469902

Piezoelectric Versus Conventional Rotary Techniques for Impacted Third Molar Extraction: A Meta-analysis of Randomized Controlled Trials.

PubMed

Jiang, Qian; Qiu, Yating; Yang, Chi; Yang, Jingyun; Chen, Minjie; Zhang, Zhiyuan

2015-10-01

Impacted third molars are frequently encountered in clinical work. Surgical removal of impacted third molars is often required to prevent clinical symptoms. Traditional rotary cutting instruments are potentially injurious, and piezosurgery, as a new osteotomy technique, has been introduced in oral and maxillofacial surgery. No consistent conclusion has been reached regarding whether this new technique is associated with fewer or less severe postoperative sequelae after third molar extraction.The aim of this study was to compare piezosurgery with rotary osteotomy techniques, with regard to surgery time and the severity of postoperative sequelae, including pain, swelling, and trismus.We conducted a systematic literature search in the Cochrane Library, PubMed, Embase, and Google Scholar.The eligibility criteria of this study included the following: the patients were clearly diagnosed as having impacted mandibular third molars; the patients underwent piezosurgery osteotomy, and in the control group rotary osteotomy techniques, for removing impacted third molars; the outcomes of interest include surgery time, trismus, swelling or pain; the studies are randomized controlled trials.We used random-effects models to calculate the difference in the outcomes, and the corresponding 95% confidence interval. We calculated the weighted mean difference if the trials used the same measurement, and a standardized mean difference if otherwise.A total of seven studies met the eligibility criteria and were included in our analysis. Compared with rotary osteotomy, patients undergoing piezosurgery experienced longer surgery time (mean difference 4.13 minutes, 95% confidence interval 2.75-5.52, P < 0.0001). Patients receiving the piezoelectric technique had less swelling at postoperative days 1, 3, 5, and 7 (all Ps ≤0.023). Additionally, there was a trend of less postoperative pain and trismus in the piezosurgery groups.The number of included randomized controlled trials and the sample size of each trial were relatively small, double blinding was not possible, and cost analysis was unavailable due to a lack of data.Our meta-analysis indicates that although patients undergoing piezosurgery experienced longer surgery time, they had less postoperative swelling, indicating that piezosurgery is a promising alternative technique for extraction of impacted third molars.

Excess protons in water-acetone mixtures. II. A conductivity study.

PubMed

Semino, Rocío; Longinotti, M Paula

2013-10-28

In the present work we complement a previous simulation study [R. Semino and D. Laria, J. Chem. Phys. 136, 194503 (2012)] on the disruption of the proton transfer mechanism in water by the addition of an aprotic solvent, such as acetone. We provide experimental measurements of the mobility of protons in aqueous-acetone mixtures in a wide composition range, for water molar fractions, xw, between 0.05 and 1.00. Furthermore, new molecular dynamics simulation results are presented for rich acetone mixtures, which provide further insight into the proton transport mechanism in water-non-protic solvent mixtures. The proton mobility was analyzed between xw 0.05 and 1.00 and compared to molecular dynamics simulation data. Results show two qualitative changes in the proton transport composition dependence at xw ∼ 0.25 and 0.8. At xw < 0.25 the ratio of the infinite dilution molar conductivities of HCl and LiCl, Λ(0)(HCl).Λ(0)(LiCl)(-1), is approximately constant and equal to one, since the proton diffusion is vehicular and equal to that of Li(+). At xw ∼ 0.25, proton mobility starts to differ from that of Li(+) indicating that above this concentration the Grotthuss transport mechanism starts to be possible. Molecular dynamics simulation results showed that at this threshold concentration the probability of interconversion between two Eigen structures starts to be non-negligible. At xw ∼ 0.8, the infinite molar conductivity of HCl concentration dependence qualitatively changes. This result is in excellent agreement with the analysis presented in the previous simulation work and it has been ascribed to the interchange of water and acetone molecules in the second solvation shell of the hydronium ion.

Relationship Between Third Mandibular Molar Angulation and Distal Cervical Caries in the Second Molar.

PubMed

Claudia, Andreescu; Barbu, Horia Mihail; Adi, Lorean; Gultekin, Alper; Reiser, Vadim; Gultekin, Pinar; Mijiritsky, Eitan

2018-03-16

Third lower molar partially erupted is commonly encountered in dental practice. This situation challenges clinicians with the dilemma whether to remove or to monitor it, because this molar can cause pathology of the adjacent second molar. The aim of this retrospective study is to evaluate the relationship between third mandibular molar and distal cervical caries in second molar. This retrospective study analyzed 55 digital orthopantograms of adult patients and a total number of 95 mandibular third molars were assessed for eruption status, angulation, radiographic evidence of caries or restoration in the mandibular third molar, and radiographic evidence of caries or restoration in the distal surface of the mandibular second molar. The distal cervical caries in second molar is associated with fully erupted and partially erupted wisdom molar in horizontal, mesioangular and vertical position and less with presence of caries in third molar. There are caries lesions in distal second molars in mesioangular position when adjacent third molar is caries free.

Molecular dynamics simulation of ZnO wurtzite phase under high and low pressures and temperatures

NASA Astrophysics Data System (ADS)

Chergui, Y.; Aouaroun, T.; Hadley, M. J.; Belkada, R.; Chemam, R.; Mekki, D. E.

2017-11-01

Isothermal and isobaric ensembles behaviours of ZnO wurtzite phase have been investigated, by parallel molecular dynamics method and using Buckingham potential, which contains long-range Coulomb, repulsive exponential, and attractive dispersion terms. To conduct our calculations, we have used dl_poly 4 software, under which the method is implemented. We have examined the influence of the temperature and pressure on molar volume in the ranges of 300-3000 K and 0-200 GPa. Isothermal-isobaric relationships, fluctuations, standard error, equilibrium time, molar volume and its variation versus time are predicted and analyzed. Our results are close to available experimental data and theoretical results.

Coordination modes, spectral, thermal and biological evaluation of hetero-metal copper containing 2-thiouracil complexes

NASA Astrophysics Data System (ADS)

Masoud, Mamdouh S.; Soayed, Amina A.; El-Husseiny, Amel F.

2012-12-01

Mononuclear copper complex [CuL(NH3)4]Cl2·0.5H2O and three new hetero-metallic complexes: [Cu2Ni(L)2(NH3)2Cl2·6H2O] 2H2O, [Cu3Co(L)4·8H2O]Cl·4·5H2O, and [Cu4Co2Ni(L)3(OH)4(NH3)Cl4·3H2O]4H2O where L is 2-thiouracil, were prepared and characterized by elemental analyses, molar conductance, room-temperature magnetic susceptibility, spectral (IR, UV-Vis and ESR) studies and thermal analyses techniques (TG, DTG and DTA). The molar conductance data revealed that [CuL(NH3)4]Cl2·0.5H2O and [Cu3Co(L)4·8H2O]Cl·4.5H2O are electrolytes, while, [Cu2Ni(L)2(NH3)2Cl2·6H2O]·2H2O and [Cu4Co2Ni(L)3(OH)4(NH3)Cl4·3H2O]4H2O are non-electrolytes. IR spectra showed, that 2-thiouracil ligand behaves as a bidentate or tetradentate ligand. The geometry around the metal atoms is octahedral in all the prepared complexes except in [Cu4Co2Ni(L)3(OH)4(NH3)Cl4·3H2O]4H2O complex where square planar environment around Co(II), Ni(II) and Cu(II) were suggested. Thermal decomposition study of the prepared complexes was monitored by TG, DTG and DTA analyses under N2 atmosphere. The decomposition course and steps were analyzed. The order of chemical reactions (n) was calculated via the peak symmetry method and the activation parameters of the non- isothermal decomposition were computed from the thermal decomposition data. The negative values of ΔS∗ deduced the ordered structures of the prepared complexes compared to their starting reactants. The antimicrobial activity of the prepared complexes were screened in vitro against a Gram positive, a Gram negative bacteria, a filamentous fungi and a yeast. The antimicrobial screening data showed that the studied compounds exhibited a good level of activity against Escherichia coli, Staphylococcus aureus and Candida albicans but have no efficacy against Aspergillus flavus. It was observed that [Cu4Co2Ni(L)3(OH)4(NH3)Cl4·3H2O]4H2O complex showed the most intensive activity against the tested microorganisms. Trials to prepare single crystals from complexes were failed.

Diagnostic value of panoramic radiography in predicting inferior alveolar nerve injury after mandibular third molar extraction: a meta-analysis.

PubMed

Liu, W; Yin, W; Zhang, R; Li, J; Zheng, Y

2015-06-01

The aim of this study was to evaluate the predictive value of panoramic radiography on inferior alveolar nerve (IAN) injury after extraction of the mandibular third molar. Relevant studies up to 1 June 2014 that discussed the association of panoramic radiography signs and post-mandibular third molar extraction IAN injury were systematically retrieved from the databases of PubMed, Embase, Springerlink, Web of Science and Cochrane library. The effect size of pooled sensitivity, specificity, positive likelihood ratios (PLR), negative likelihood ratios (NLR) and diagnostic odds ratio (DOR) with their 95% confidence intervals (CI) were statistically analysed with Meta-disc 1.4 software. Nine articles were included in this meta-analysis. The pooled estimates of sensitivity and specificity were 0.56 (95% CI: 0.50-0.61) and 0.86 (95% CI: 0.84-0.87), respectively. The overall PLR was 3.46 (95% CI: 2.02-5.92) and overall NLR was 0.58 (95% CI: 0.45-0.73). The pooled estimate of DOR was 6.49 (95% CI: 2.92-14.44). The area under the summary receiver operating characteristic curve was 0.7143 ± 0.0604. The meta-analysis indicated that interpretation of panoramic radiography based on darkening of the root had a high specificity in predicting IAN injury after mandibular third molar extraction. However, the ability of this panoramic radiography marker to detect true positive IAN injury was not satisfactory. © 2015 Australian Dental Association.

Morphologic study of the maxillary molars. Part II: Internal anatomy.

PubMed

Pécora, J D; Woelfel, J B; Sousa Neto, M D; Issa, E P

1992-01-01

The internal anatomy of three hundred and seventy (370) decalcified and cleared human maxillary molars was studied. Seventy-five percent of the first molars, 58% of the second molars and 68% of the third molars studied presented three (3) root canals and 25% of the first molars, 42% of the second molars and 32% of the third molars presented four (4) root canals. The authors observed that the incidence of two root canals in the mesiobuccal root was higher in second maxillary molars than in first maxillary molars.

Decreased Serum IGF-1/IGFBP-3 Molar Ratio is Associated with Executive Function Behaviors in Type 2 Diabetic Patients with Mild Cognitive Impairment.

PubMed

Huang, Rong; Wang, Pin; Han, Jing; Xia, Wenqing; Cai, Rongrong; Sun, Haixia; Sun, Jie; Wang, Shaohua

2015-01-01

Insulin-like growth factor (IGF)-1, through insulin/IGF-1 signaling pathway, is involved in the pathogenesis of type 2 diabetes mellitus (T2DM) and Alzheimer's disease. This study aimed to assess the association of serum IGF-1 and IGF binding protein (IGFBP)-3 levels with cognition status and to determine whether IGF-1 rs972936 polymorphism is associated with T2DM with mild cognitive impairment (MCI). A total of 150 T2DM patients, 75 satisfying the MCI diagnostic criteria and 75 exhibiting healthy cognition, were enrolled in this study. The cognitive function of the subjects was extensively assessed. Serum IGF-1 and IGFBP-3 levels were measured through enzyme-linked immunosorbent assay; IGF-1/IGFBP-3 molar ratio was calculated. Single nucleotide polymorphisms of the IGF-1-(rs972936) gene were analyzed. Serum IGF-1/IGFBP-3 molar ratio in MCI patients was significantly lower than that in the control group (p = 0.003). Significant negative correlations were found between IGF-1/IGFBP-3 molar ratio and Trail Making Test A and B (TMT-A and TMT-B) scores (p = 0.003; p <  0.001, respectively), which indicated executive function. Further multiple step-wise regression analysis revealed that the TMT-A or TMT-B score was significantly associated only with serum IGF-1/IGFBP-3 molar ratio (p = 0.016; p <  0.001, respectively). No significant difference was found in the genotype or allele distribution of IGF-1 rs972936 polymorphism between MCI and control groups. A low serum IGF-1/IGFBP-3 molar ratio is associated with the pathogenesis of MCI, particularly executive function in T2DM populations. Further investigation with a large population size should be conducted to confirm this observed association.

Synthesis, characterization, thermal and biological evaluation of Cu (II), Co (II) and Ni (II) complexes of azo dye ligand containing sulfamethaxazole moiety

NASA Astrophysics Data System (ADS)

Mallikarjuna, N. M.; Keshavayya, J.; Maliyappa, M. R.; Shoukat Ali, R. A.; Venkatesh, Talavara

2018-08-01

A novel bioactive Cu (II), Co (II) and Ni (II) complexes of the azo dye ligand (L) derived from sulfamethoxazole were synthesized. The structures of the newly synthesized compounds were characterized by elemental analysis, molar conductance, magnetic susceptibility, FTIR, UV-visible, 1H NMR, mass, thermal and powder XRD spectral techniques. Molar conductivity measurements in DMSO solution confirmed the non-electrolytic nature of the complexes. All the synthesized metal complexes were found to be monomeric and showed square planar geometry except the Co (II) complex which has six coordinate, octahedral environment. The metal complexes have exhibited potential growth inhibitory effect against tested bacterial strains as compared to the free ligand. The ligand and complexes have also shown significant antioxidant and Calf Thymus DNA cleavage activities. Further, the in silico molecular docking studies were performed to predict the possible binding sites of the ligand (L) and its metal complexes with target receptor Glu-6P.

Evaluation of the Self-Adjusting File system (SAF) for the instrumentation of primary molar root canals: a micro-computed tomographic study.

PubMed

Kaya, E; Elbay, M; Yiğit, D

2017-06-01

The Self-Adjusting File (SAF) system has been recommended for use in permanent teeth since it offers more conservative and effective root-canal preparation when compared to traditional rotary systems. However, no study had evaluated the usage of SAF in primary teeth. The aim of this study was to evaluate and compare the use of SAF, K file (manual instrumentation) and Profile (traditional rotary instrumentation) systems for primary-tooth root-canal preparation in terms of instrumentation time and amounts of dentin removed using micro-computed tomography (μCT) technology. Study Design: The study was conducted with 60 human primary mandibular second molar teeth divided into 3 groups according to instrumentation technique: Group I: SAF (n=20); Group II: K file (n=20); Group III; Profile (n=20). Teeth were embedded in acrylic blocks and scanned with a μCT scanner prior to instrumentation. All distal root canals were prepared up to size 30 for K file,.04/30 for Profile and 2 mm thickness, size 25 for SAF; instrumentation time was recorded for each tooth, and a second μCT scan was performed after instrumentation was complete. Amounts of dentin removed were measured using the three-dimensional images by calculating the difference in root-canal volume before and after preparation. Data was statistically analysed using the Kolmogorov-Smirnov and Kruskal-Wallis tests. Manual instrumentation (K file) resulted in significantly more dentin removal when compared to rotary instrumentation (Profile and SAF), while the SAF system generated significantly less dentin removal than both manual instrumentation (K file) and traditional rotary instrumentation (Profile) (p<.05). Instrumentation time was significantly greater with manual instrumentation when compared to rotary instrumentation (p<.05), whereas instrumentation time did not differ significantly between the Profile and SAF systems. Within the experimental conditions of the present study, the SAF seems as a useful system for root-canal instrumentation in primary molars because it removed less dentin than other systems, which is especially important for the relatively thin-walled canals of primary teeth, and because it involves less clinical time, which is particularly important in the treatment of paediatric patients.

The effect of orthognathic surgery on the lip lines while smiling in skeletal class III patients with facial asymmetry.

PubMed

Kang, Sang-Hoon; Kim, Moon-Key; An, Sang-In; Lee, Ji-Yeon

2016-12-01

The aim of this study was to examine the relationship between improvements in lip asymmetry at rest and while smiling after orthognathic surgery in patients with skeletal class III malocclusion. This study included 21 patients with skeletal class III malocclusion and facial asymmetry. We used preoperative and postoperative CT data and photographs to measure the vertical distance of the lips when smiling. The photographs were calibrated based on these distances and the CT image. We compared preoperative and postoperative results with the t test and correlations between measurements at rest and when smiling by regression analyses. There were significant correlations between the postoperative changes in canting of the mouth corners at rest, canting of the canines, canting of the first molars, the slope of the line connecting the canines, and the slope of the line connecting first molars. The magnitude of the postoperative lip line improvement while smiling was not significantly correlated with changes in the canting and slopes of the canines, molars, and lip lines at rest. It remains difficult to predict lip line changes while smiling compared with at rest after orthognathic surgery in patients with mandibular prognathism, accompanied by facial asymmetry.

Experimental evaluation of new chitin-chitosan graft for duraplasty.

PubMed

Pogorielov, M; Kravtsova, A; Reilly, G C; Deineka, V; Tetteh, G; Kalinkevich, O; Pogorielova, O; Moskalenko, R; Tkach, G

2017-02-01

Natural materials such as collagen and alginate have promising applications as dural graft substitutes. These materials are able to restore the dural defect and create optimal conditions for the development of connective tissue at the site of injury. A promising material for biomedical applications is chitosan-a linear polysaccharide obtained by the deacetylation of chitin. It has been found to be nontoxic, biodegradable, biofunctional and biocompatible in addition to having antimicrobial characteristics. In this study we designed new chitin-chitosan substitutes for dura mater closure and evaluated their effectiveness and safety. Chitosan films were produced from 3 % of chitosan (molar mass-200, 500 or 700 kDa, deacetylation rate 80-90%) with addition of 20% of chitin. Antimicrobial effictively and cell viability were analysed for the different molar masses of chitosan. The film containing chitosan of molar mass 200 kDa, had the best antimicrobial and biological activity and was successfully used for experimental duraplasty in an in vivo model. In conclusion the chitin-chitosan membrane designed here met the requirements for a dura matter graft exhibiting the ability to support cell growth, inhibit microbial growth and biodegradade at an appropriate rate. Therefore this is a promising material for clinical duroplasty.

Genome-wide association study (GWAS) for molar-incisor hypomineralization (MIH).

PubMed

Kühnisch, Jan; Thiering, Elisabeth; Heitmüller, Daniela; Tiesler, Carla M T; Grallert, Harald; Heinrich-Weltzien, Roswitha; Hickel, Reinhard; Heinrich, Joachim

2014-01-01

This genome-wide association study (GWAS) investigated the relationship between molar-incisor hypomineralization (MIH) and possible genetic loci. Clinical and genetic data from the 10-year follow-up of 668 children from the Munich GINI-plus and LISA-plus birth cohort studies were analyzed. The dental examinations included the diagnosis of MIH according to the criteria of the European Academy of Paediatric Dentistry (EAPD). Children with MIH were categorized as those with a minimum of one hypomineralized first permanent molar. A GWAS was implemented following a quality-control step and an additive genetic effect was assumed. A total of 2,013,491 single-nucleotide polymorphisms (SNPs) were available for analysis. Rs13058467, which is located near the SCUBE1 gene on chromosome 22 (p < 3.72E-7), was identified as a possible locus linked to MIH when using a threshold of p value <1E-6. After considering the limitations of the present study (e.g., limited sample size and lack of an independent replication sample), it can be concluded that (1) replication analyses in an independent cohort study are strongly recommended and (2) large-scale and well-powered studies are needed to investigate a possible genetic link to MIH.

Enamel ribbons, surface nodules, and octacalcium phosphate in C57BL/6 Amelx -/- mice and Amelx +/- lyonization

DOE PAGES

Hu, Yuanyuan; Smith, Charles E.; Cai, Zhonghou; ...

2016-10-05

Amelogenin is required for normal enamel formation and is the most abundant protein in developing enamel. Methods. Amelx +/+, Amelx +/- and Amelx -/- molars and incisors from C57BL/6 mice were characterized using RT-PCR, Western blotting, dissecting and light microscopy, immunohistochemistry (IHC), transmission electron microscopy (TEM), scanning electron microscopy (SEM), backscattered SEM (bSEM), nanohardness testing, and X-ray diffraction. No amelogenin protein was detected by Western blot analyses of enamel extracts from Amelx -/- mice. Amelx -/- incisor enamel averaged 20.3±3.3 μm in thickness, or only 1/6th that of the wild-type (122.3±7.9 μm). Amelx -/- incisor enamel nanohardness was 1.6 Gpa,more » less than half that of wild-type enamel (3.6 Gpa). Amelx +/- incisors and molars showed vertical banding patterns unique to each tooth. IHC detected no amelogenin in Amelx -/- enamel and varied levels of amelogenin in Amelx +/- incisors, which correlated positively with enamel thickness, strongly supporting lyonization as the cause of the variations in enamel thickness. TEM analyses showed characteristic mineral ribbons in Amelx +/+ and Amelx -/- enamel extending from mineralized dentin collagen to the ameloblast. The Amelx-/- enamel ribbons were not well-separated by matrix and appeared to fuse together, forming plates. Furthermore, x-ray diffraction determined that the predominant mineral in Amelx -/- enamel is octacalcium phosphate (not calcium hydroxyapatite). Amelx -/- ameloblasts were similar to wild-type ameloblasts except no Tomes’ processes extended into the thin enamel. Amelx -/- and Amelx +/- molars both showed calcified nodules on their occlusal surfaces. Histology of D5 and D11 developing molars showed nodules forming during the maturation stage. Amelogenin forms a resorbable matrix that separates and supports, but does not shape early secretory stage enamel ribbons. Amelogenin may facilitate the conversion of enamel ribbons into hydroxyapatite by inhibiting the formation of octacalcium phosphate. Finally, amelogenin is necessary for thickening the enamel layer, which helps maintain ribbon organization and development and maintenance of the Tomes process.« less

Periodicity in the BrO/SO2 molar ratios in the volcanic gas plume of Cotopaxi and its correlation with the Earth tides during the eruption in 2015

NASA Astrophysics Data System (ADS)

Dinger, Florian; Bobrowski, Nicole; Warnach, Simon; Bredemeyer, Stefan; Hidalgo, Silvana; Arellano, Santiago; Galle, Bo; Platt, Ulrich; Wagner, Thomas

2018-03-01

We evaluated NOVAC (Network for Observation of Volcanic and Atmospheric Change) gas emission data from the 2015 eruption of the Cotopaxi volcano (Ecuador) for BrO/SO2 molar ratios. The BrO/SO2 molar ratios were very small prior to the phreatomagmatic explosions in August 2015, significantly higher after the explosions, and continuously increasing until the end of the unrest period in December 2015. These observations together with similar findings in previous studies at other volcanoes (Mt. Etna, Nevado del Ruiz, Tungurahua) suggest a possible link between a drop in BrO/SO2 and a future explosion. In addition, the observed relatively high BrO/SO2 molar ratios after December 2015 imply that bromine degassed predominately after sulfur from the magmatic melt. Furthermore, statistical analysis of the data revealed a conspicuous periodic pattern with a periodicity of about 2 weeks in a 3-month time series. While the time series is too short to rule out a chance recurrence of transient geological or meteorological events as a possible origin for the periodic signal, we nevertheless took this observation as a motivation to examine the influence of natural forcings with periodicities of around 2 weeks on volcanic gas emissions. One strong aspirant with such a periodicity are the Earth tides, which are thus central in this study. We present the BrO/SO2 data, analyse the reliability of the periodic signal, discuss a possible meteorological or eruption-induced origin of this signal, and compare the signal with the theoretical ground surface displacement pattern caused by the Earth tides. Our central result is the observation of a significant correlation between the BrO/SO2 molar ratios with the north-south and vertical components of the calculated tide-induced surface displacement with correlation coefficients of 47 and 36 %, respectively. From all other investigated parameters, only the correlation between the BrO/SO2 molar ratios and the relative humidity in the local atmosphere resulted in a comparable correlation coefficient of about 33 %.

Anatomical landmarks for the localization of the greater palatine foramen – a study of 1200 head CTs, 150 dry skulls, systematic review of literature and meta-analysis

PubMed Central

Tomaszewska, Iwona M; Tomaszewski, Krzysztof A; Kmiotek, Elizabeth K; Pena, Iwona Z; Urbanik, Andrzej; Nowakowski, Michał; Walocha, Jerzy A

2014-01-01

Accurate knowledge of greater palatine foramen (GPF) anatomy is necessary when performing a variety of anaesthesiological, dental or surgical procedures. The first aim of this study was to localize the GPF in relation to multiple anatomical landmarks. The second aim was to perform a systematic review of literature, and to conduct a meta-analysis on the subject of GPF position to aid clinicians in their practice. One-hundred and fifty dry, adult, human skulls and 1200 archived head computed tomography scans were assessed and measured in terms of GPF relation to other anatomical reference points. A systematic literature search was performed using the PubMed, Embase and Web of Science databases, and a meta-analysis on the subject of GPF relation to the maxillary molars was conducted. On average, in the Polish population, the GPF was positioned 15.9 ± 1.5 mm from the midline maxillary suture (MMS), 3.0 ± 1.2 mm from the alveolar ridge (AR) and 17.0 ± 1.5 mm from the posterior nasal spine (PNS); 74.7% of GPF were positioned opposite the third maxillary molar (M3). Twenty-seven studies were included in the systematic review and 23 in the meta-analysis (n = 6927 GPF). The pooled prevalence of the GPF being positioned opposite the M3 was 63.9% (95% confidence interval = 56.6–70.9%). Concluding, the GPF is most often located opposite the M3 in the majority of the world's populations. The maxillary molars are the best landmarks for locating the GPF. In edentulous patients the most useful points for approximating the position of the GPF are the AR, MMS and PNS. This study introduces an easy and repeatable classification to reference the GPF to the maxillary molars. PMID:25131842

Replacement of a first molar and 3 second molars by the mesial inclination of 4 impacted third molars in an adult with a Class II Division 1 malocclusion.

PubMed

Tomonari, Hiroshi; Yagi, Takakazu; Kuninori, Takaharu; Ikemori, Takahiro; Miyawaki, Shouichi

2015-06-01

This case report presents the successful replacement of 1 first molar and 3 second molars by the mesial inclination of 4 impacted third molars. A woman, 23 years 6 months old, had a chief complaint of crowding of her anterior teeth and linguoclination of a second molar on the left side. The panoramic radiographic images showed that the maxillary and mandibular third molars on both sides were impacted. Root resorption on the distal surfaces of the maxillary second molars was suspected. The patient was given a diagnosis of Angle Class II Division 1 malocclusion with severe crowding of the anterior teeth and 4 impacted third molars. After we extracted the treated maxillary second premolars and the second molars on both sides, the treated mandibular second premolar and the second molar on the left side, and the root canal-filled mandibular first molar on the right side, the 4 impacted third molars were uprighted and formed part of the posterior functional occlusion. The total active treatment period was 39 months. The maxillary and mandibular third molars on both sides successfully replaced the first and second molars. The replacement of a damaged molar by an impacted third molar is a useful treatment option for using sound teeth. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage.

PubMed

Kang, Ju-Man; Park, Jae Hyun; Bayome, Mohamed; Oh, Moonbee; Park, Chong Ook; Kook, Yoon-Ah; Mo, Sung-Seo

2016-09-01

This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

The Effect of Si and Al Concentration Ratios on the Removal of U(VI) under Hanford Site 200 Area Conditions-12115

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katsenovich, Yelena; Gonzalez, Nathan; Moreno-Pastor, Carol

2012-07-01

Injection of reactive gases, such as NH{sub 3}, is an innovative technique to mitigate uranium contamination in soil for a vadose zone (VZ) contaminated with radionuclides. A series of experiments were conducted to examine the effect of the concentration ratio of silicon to aluminum in the presence of various bicarbonate concentrations on the coprecipitation process of U(VI). The concentration of Al in all tests remained unchanged at 2.8 mM. Experiments showed that the removal efficiency of uranium was not significantly affected by the different bicarbonate and U(VI) concentrations tested. For the lower Si:Al molar ratios of 2:1 and 18:1, themore » removal efficiency of uranium was relatively low (≤ 8%). For the Si:Al molar ratio of 35:1, the removal efficiency of uranium was increased to an average of ∼82% for all bicarbonate concentrations tested. At higher Si:Al molar ratios (53:1 and above), a relatively high removal efficiency of U(VI), approximately 85% and higher, was observed. These results demonstrate that the U(VI) removal efficiency is more affected by the Si:Al molar ratio than by the bicarbonate concentration in solution. The results of this experiment are promising for the potential implementation of NH{sub 3} gas injection for the remediation of U(VI) -contaminated VZ. (authors)« less

Self-assembly of myristic acid in the presence of choline hydroxide: effect of molar ratio and temperature.

PubMed

Arnould, Audrey; Perez, Adrian A; Gaillard, Cédric; Douliez, Jean-Paul; Cousin, Fabrice; Santiago, Liliana G; Zemb, Thomas; Anton, Marc; Fameau, Anne-Laure

2015-05-01

Salt-free catanionic systems based on fatty acids exhibit a broad polymorphism by simply tuning the molar ratio between the two components. For fatty acid combined with organic amino counter-ions, very few data are available on the phase behavior obtained as a function of the molar ratio between the counter-ion and the fatty acid. We investigated the choline hydroxide/myristic acid system by varying the molar ratio, R=n(choline hydroxide)/n(myristic acid), and the temperature. Myristic acid ionization state was determined by coupling pH, conductivity and infra-red spectroscopy measurements. Self-assemblies were characterized by small angle neutron scattering and microscopy experiments. Self-assembly thermal behavior was investigated by differential scanning calorimetry, wide angle X-ray scattering and nuclear magnetic resonance. For R<1, ionized and protonated myristic acid molecules coexisted leading to the formation of facetted self-assemblies and lamellar phases. The melting process between the gel and the fluid state of these bilayers induced a structural change from facetted or lamellar objects to spherical vesicles. For R>1, myristic acid molecules were ionized and formed spherical micelles. Our study highlights that both R and temperature are two key parameters to finely control the self-assembly structure formed by myristic acid in the presence of choline hydroxide. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison of Mineral Trioxide Aggregate and Diluted Formocresol in Pulpotomized Human Primary Molars: 42-month Follow-up and Survival Analysis

PubMed Central

Mettlach, Sarah E.; Zealand, Cameron M.; Botero, Tatiana M.; Boynton, James R.; Majewski, Robert F.; Hu, Jan ChingChun

2015-01-01

Purpose The purpose of this study was to test the hypothesis that there is no significant difference in the clinical and radiographic outcomes of diluted formocresol (DFC) compared to gray mineral trioxide aggregate (GMTA) pulpotomy in human primary molars. Methods A total of 152 children with 252 primary molars met selection criteria. Of those, 119 and 133 teeth were randomly assigned to the GMTA and DFC groups, respectively. Periapical radiographs, taken pre- and/or postoperatively and at each 6-month follow-up, were digitized and evaluated by three blinded and calibrated examiners. Results Over a 42-month period, a total of 865 clinical and radiographic evaluations were conducted. There was no significant difference in clinical success, with the cumulative proportion of GMTA-treated teeth surviving at 0.98 vs DFC-treated teeth at 0.95 (P>.05). Radiographic success, however, was significantly greater for GMTA vs DFC, with the cumulative proportion of GMTA-treated teeth surviving at 0.90 vs DFC-treated teeth at 0.47 (P<.001). Overall, DFC-treated teeth were 5.1 times more likely to fail than GMTA-treated teeth. Radiographic pathologies were observed more frequently in the DFC-treated teeth (P<.05). Conclusion Gray mineral trioxide aggregate can be considered an acceptable replacement for diluted formocresol when used as a medicament for primary molar pulpotomies. PMID:23756301

Cocrystal Screening of Ibuprofen with Oxalic Acid and Citric Acid via Grinding Method

NASA Astrophysics Data System (ADS)

Othman, M. F.; Anuar, N.; Rahman, S. Ad; Taifuddin, N. A. Ahmad

2018-05-01

Ibuprofen is a Class II Biological Safety Class (BSC) drugs used for relief of arthritis, as an analgesic and possesses the effect of antiplatelet. The major problem involves in ibuprofen is it has a low solubility and high permeability thus causes an unsatisfactory therapeutic effect to humans. Thus, in this work, alteration of ibuprofen’s physicochemical properties is conducted by means of cocrystallization technique. Co-crystallizations of ibuprofen were prepared with selected coformers using dry grinding and liquid assisted grinding (LAG) techniques in different molar ratios while ethanol and propanol were used as a solvent. The new crystalline forms were identified and characterized by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and fourier transform infrared spectroscopy (FTIR). Analysis for Ibuprofen-Citric acid (IBP-CA) system, co-crystal was successfully formed in 1:2, 1:3, 2:1 and 3:1 molar ratios for neat grinding method although the co-crystal produced is unstable. Meanwhile, for Ibuprofen-Oxalic acid (IBP-OA) system, the co-crystal formation was identified only in 1:1, 1:2 and 1:3 molar ratios for the neat grinding method. LAG method shows that co-crystal formation was unsuccessful in both solvents for IBP-CA, while IBP-OA co-crystal was formed in the molar ratio 1:1, 2:1 and 3:1 in ethanol, and 2:1 and 3:1 in propanol.

A Neanderthal lower molar from Stajnia Cave, Poland.

PubMed

Dąbrowski, P; Nowaczewska, W; Stringer, C B; Compton, T; Kruszyński, R; Nadachowski, A; Stefaniak, K; Urbanowski, M

2013-04-01

The primary aim of this study was to conduct a taxonomic assessment of the second of three isolated human teeth found in the Stajnia Cave (north of the Carpathians, Poland) in 2008. The specimen was located near a human tooth (S5000), which was identified by Urbanowski et al. (2010) as a Neanderthal permanent upper molar. Both of these teeth were excavated from the D2 layer, which belongs to the D stratigraphic complex comprising the archaeological assemblage associated with the Micoquian tradition. An Ursus spelaeus bone and Mammuthus primigenius tooth that were also excavated from the D2 layer were dated to >49,000 years BP (by AMS (14)C) and 52.9 ka BP (by U-Th), respectively. The sediment overlying stratigraphic complex D was dated to 45.9 ka BP by the OSL method. The S4300 tooth is a lower first or second permanent molar belonging to an individual other than that who once possessed the S5000 tooth. The S4300 tooth exhibits a combination of traits typical of Neanderthal lower molars, including a mid-trigonid crest, large anterior fovea, taurodontism and subvertical grooves on the interproximal face, indicating that this tooth belonged to a Neanderthal individual. The S4300 tooth from Stajnia Cave is one of the oldest human remains found in Poland. Copyright © 2013 Elsevier GmbH. All rights reserved.

Retained asymptomatic third molars and risk for second molar pathology.

PubMed

Nunn, M E; Fish, M D; Garcia, R I; Kaye, E K; Figueroa, R; Gohel, A; Ito, M; Lee, H J; Williams, D E; Miyamoto, T

2013-12-01

Prophylactic extraction of unerupted asymptomatic third molars is the most common oral surgery procedure in the United States. However, limited evidence exists to justify its costs and associated morbidity. We analyzed data collected over 25 years from 416 adult men enrolled in the Veterans Affairs Dental Longitudinal Study to evaluate the association of retained asymptomatic third molars with risk of adjacent second molar pathology (caries and/or periodontitis), based on third molar status (i.e., absent, erupted, or unerupted). Unerupted molars were further categorized as either "soft tissue" or "bony" impacted. We found that the lowest prevalence and incidence of second molar pathology occurred when the adjacent third molar was absent. The presence of a third molar that was soft tissue impacted increased the risk of incident second molar pathology 4.88-fold (95% confidence interval: 2.62, 9.08). Having an erupted or "bony" impacted third molar increased the risk of incident second molar pathology by 1.74 (95% confidence interval: 1.34, 2.25) and 2.16 (95% confidence interval: 1.56, 2.99), respectively. The retention of third molars is associated with increased risk of second molar pathology in middle-aged and older adult men.

Retained Asymptomatic Third Molars and Risk for Second Molar Pathology

PubMed Central

Nunn, M.E.; Fish, M.D.; Garcia, R.I.; Kaye, E.K.; Figueroa, R.; Gohel, A.; Ito, M.; Lee, H.J.; Williams, D.E.; Miyamoto, T.

2013-01-01

Prophylactic extraction of unerupted asymptomatic third molars is the most common oral surgery procedure in the United States. However, limited evidence exists to justify its costs and associated morbidity. We analyzed data collected over 25 years from 416 adult men enrolled in the Veterans Affairs Dental Longitudinal Study to evaluate the association of retained asymptomatic third molars with risk of adjacent second molar pathology (caries and/or periodontitis), based on third molar status (i.e., absent, erupted, or unerupted). Unerupted molars were further categorized as either “soft tissue” or “bony” impacted. We found that the lowest prevalence and incidence of second molar pathology occurred when the adjacent third molar was absent. The presence of a third molar that was soft tissue impacted increased the risk of incident second molar pathology 4.88-fold (95% confidence interval: 2.62, 9.08). Having an erupted or “bony” impacted third molar increased the risk of incident second molar pathology by 1.74 (95% confidence interval: 1.34, 2.25) and 2.16 (95% confidence interval: 1.56, 2.99), respectively. The retention of third molars is associated with increased risk of second molar pathology in middle-aged and older adult men. PMID:24132082

The Anxiolytic Effect of Midazolam in Third Molar Extraction: A Systematic Review

PubMed Central

Chen, Qi; Wang, Lufei; Ge, Lina; Gao, Yuan; Wang, Hang

2015-01-01

Purpose To assess the efficacy of midazolam for anxiety control in third molar extraction surgery. Methods Electronic retrievals were conducted in Medline (via PubMed, 1950-2013.12), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2013, Issue 3), Embase (via OVID 1974-2013.12), and the System for Information on Grey Literature in Europe (SIGLE). The bibliographies of relevant clinical trials were also checked. Randomized controlled trials satisfying the inclusion criteria were evaluated, with data extraction done independently by two well-trained investigators. Disagreements were resolved by discussion or by consultation with a third member of the review team. Results Ten studies were included, but meta-analysis could not be conducted because of the significant differences among articles. All but one article demonstrated that midazolam could relieve anxiety. One article demonstrated that propofol offered superior anxiolysis, with more rapid recovery than with midazolam. Compared with lorazepam and diazepam, midazolam did not distinctly dominate in its sedative effect, but was safer. Two articles used midazolam in multidrug intravenous sedation and proved it to be more effective than midazolam alone. Conclusion It was found, by comparison and analysis, that midazolam might be effective for use for anxiety control during third molar extraction and can be safely administered by a dedicated staff member. It can also be used with other drugs to obtain better sedative effects, but the patient’s respiratory function must be monitored closely, because multidrug sedation is also more risky. PMID:25849859

The anxiolytic effect of midazolam in third molar extraction: a systematic review.

PubMed

Chen, Qi; Wang, Lufei; Ge, Lina; Gao, Yuan; Wang, Hang

2015-01-01

To assess the efficacy of midazolam for anxiety control in third molar extraction surgery. Electronic retrievals were conducted in Medline (via PubMed, 1950-2013.12), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2013, Issue 3), Embase (via OVID 1974-2013.12), and the System for Information on Grey Literature in Europe (SIGLE). The bibliographies of relevant clinical trials were also checked. Randomized controlled trials satisfying the inclusion criteria were evaluated, with data extraction done independently by two well-trained investigators. Disagreements were resolved by discussion or by consultation with a third member of the review team. Ten studies were included, but meta-analysis could not be conducted because of the significant differences among articles. All but one article demonstrated that midazolam could relieve anxiety. One article demonstrated that propofol offered superior anxiolysis, with more rapid recovery than with midazolam. Compared with lorazepam and diazepam, midazolam did not distinctly dominate in its sedative effect, but was safer. Two articles used midazolam in multidrug intravenous sedation and proved it to be more effective than midazolam alone. It was found, by comparison and analysis, that midazolam might be effective for use for anxiety control during third molar extraction and can be safely administered by a dedicated staff member. It can also be used with other drugs to obtain better sedative effects, but the patient's respiratory function must be monitored closely, because multidrug sedation is also more risky.

Association between Molar Incisor Hypomineralization in Schoolchildren and Both Prenatal and Postnatal Factors: A Population-Based Study

PubMed Central

Corrêa-Faria, Patrícia; Ferreira, Raquel Conceição; Bendo, Cristiane Baccin; Zarzar, Patrícia Maria; Vale, Miriam Pimenta

2016-01-01

Background Although studies throughout the world have investigated potential factors involved in the occurrence of molar incisor hypomineralization (MIH), the findings are varied and inconclusive. Objective The aim of the present study was to evaluate the prevalence of MIH and identify associated prenatal, perinatal and postnatal factors among Brazilian schoolchildren aged 8 and 9 years. Methods A cross-sectional study was conducted with a randomly selected population-based sample of 1181 schoolchildren. Information on demographic and socioeconomic characteristics as well as prenatal, perinatal and postnatal aspects was obtained through questionnaires. The clinical examination included the investigation of MIH based on the criteria of the European Academy of Paediatric Dentistry. Dental caries in the permanent dentition and developmental defects of enamel (DDE) on the primary second molars were also recorded. Data analysis involved descriptive statistics, bivariate tests and Poisson regression with robust variance. Results The prevalence of MIH was 20.4%. MIH was more frequent among children with dental caries in the permanent dentition (PR: 2.67; 95% CI: 1.98–3.61), those with DDE on the primary second molars (PR: 2.54; 95% CI: 1.87–3.45) and those who experienced asthma/bronchitis in the first four years of life (PR: 1.93; 95% CI: 1.45–2.56). Conclusions The prevalence of MIH was high and was associated with dental caries, the presence of DDE on primary second molars and the experience of asthma/bronchitis in early life. These findings could be useful in the identification of children in need of shorter recall intervals to prevent the consequences of MIH, such as enamel breakdown dental caries. PMID:27280451

Does the piezoelectric surgical technique produce fewer postoperative sequelae after lower third molar surgery than conventional rotary instruments? A systematic review and meta analysis.

PubMed

Al-Moraissi, E A; Elmansi, Y A; Al-Sharaee, Y A; Alrmali, A E; Alkhutari, A S

2016-03-01

A systematic review and meta-analysis was conducted to answer the clinical question "Does the piezoelectric surgical technique produce fewer postoperative sequelae after lower third molar surgery than conventional rotary instruments?" A systematic and electronic search of several databases with specific key words, a reference search, and a manual search were performed from respective dates of inception through November 2014. The inclusion criteria were clinical human studies, including randomized controlled trials (RCTs), controlled clinical trials (CCTs), and retrospective studies, with the aim of comparing the piezoelectric surgical osteotomy technique to the standard rotary instrument technique in lower third molar surgery. Postoperative sequelae (oedema, trismus, and pain), the total number of analgesics taken, and the duration of surgery were analyzed. A total of nine articles were included, six RCTs, two CCTs, and one retrospective study. Six studies had a low risk of bias and three had a moderate risk of bias. A statistically significant difference was found between piezoelectric surgery and conventional rotary instrument surgery for lower third molar extraction with regard to postoperative sequelae (oedema, trismus, and pain) and the total number of analgesics taken (P=0.0001, P=0.0001, P<0.00001, and P<0.0001, respectively). However, a statistically significant increased surgery time was required in the piezoelectric osteotomy group (P<0.00001). The results of the meta-analysis showed that piezoelectric surgery significantly reduced the occurrence of postoperative sequelae (oedema, trismus, and pain) and the total number of analgesics taken compared to the conventional rotary instrument technique in lower third molar surgery, but required a longer surgery time. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Randomized controlled trial to compare oral analgesic requirements and patient satisfaction in using oral non-steroidal anti-inflammatory drugs versus benzydamine hydrochloride oral rinses after mandibular third molar extraction: a pilot study.

PubMed

Goswami, Devalina; Jain, Gaurav; Mohod, Mangesh; Baidya, Dalim Kumar; Bhutia, Ongkila; Roychoudhury, Ajoy

2018-02-01

Third molar extraction is associated with considerable pain and discomfort, which is mostly managed with oral analgesic medication. We assessed the analgesic effect of benzydamine hydrochloride, a topical analgesic oral rinse, for controlling postoperative pain following third molar extraction. A randomized controlled trial was conducted in 40 patients divided into two groups, for extraction of fully erupted third molar. Groups A received benzydamine hydrochloride mouthwash and group B received normal saline gargle with oral ibuprofen and paracetamol. Oral ibuprofen and paracetamol was the rescue analgesic drug in group A. Patients were evaluated on the 3 rd and 7 th post-operative days (POD) for pain using the visual analogue score (VAS), trismus, total number of analgesics consumed, and satisfaction level of patients. The VAS in groups A and B on POD3 and POD7 was 4.55 ± 2.54 and 3.95 ± 1.8, and 1.2 ± 1.64 and 0.95 ± 1.14, respectively and was statistically insignificant. The number of analgesics consumed in groups A and B on POD3 (5.25 ± 2.22 and 6.05 ± 2.43) was not statistically different from that consumed on POD7 (9.15 ± 5.93 and 10.65 ± 6.46). The p values for trismus on POD3 and POD7 were 0.609 and 0.490, respectively and those for patient satisfaction level on POD3 and POD7 were 0.283 and 0.217, respectively. Benzydamine hydrochloride oral rinses do not significantly reduce intake of oral analgesics and are inadequate for pain relief following mandibular third molar extraction.

Third molar removal and its impact on quality of life: systematic review and meta-analysis.

PubMed

Duarte-Rodrigues, Lucas; Miranda, Ednele Fabyene Primo; Souza, Taiane Oliveira; de Paiva, Haroldo Neves; Falci, Saulo Gabriel Moreira; Galvão, Endi Lanza

2018-05-24

The purpose of this systematic review was to assess the impact of third molar removal on patient's quality of life. To address the study purpose, investigators designed and implemented a systematic review. The primary outcome variable was the quality of life after third molar extraction. An electronic search was conducted through March, 2017, on the PUBMED, Virtual Health Library (VHL), Web of Science, and OVID, to identify relevant literatures. Research studies (randomized or non-randomized clinical trials) were included that evaluated the quality of life in individuals before and after third molar extraction, using validated measures of oral health-related quality of life with quantitative approach, besides procedures performed under local anesthesia. The R software was used to measure the mean difference on the quality of life between the preoperative period and follow-up days. A total of 1141 studies were identified. Of this total, 13 articles were selected in the present systematic review, of which six studies were included in the meta-analysis. All of these 13 articles used the OHIP-14, and 4 of this 13 used OHQoLUK-16 to evaluate the quality of life. Regarding quality assessment, four of the 13 included studies in this review received a maximum score of 9 points, according to the Newcastle-Ottawa (NOS). The OHIP-14 mean score on the first postoperative day was 17.57 (95% CI 11.84-23.30, I 2  = 96%) higher than the preoperative period. On the seventh postoperative day, the quality of life assessed by OHIP-14 got worse again. This systematic review revealed that the highest negative impact on quality of life of individuals submitted to third molar surgery was observed on the first postoperative day, decreasing over the follow-up period.

Free volume of mixed cation borosilicate glass sealants elucidated by positron annihilation lifetime spectroscopy and its correlation with glass properties

NASA Astrophysics Data System (ADS)

Ojha, Prasanta K.; Rath, Sangram K.; Sharma, Sandeep K.; Sudarshan, Kathi; Pujari, Pradeep K.; Chongdar, Tapas K.; Gokhale, Nitin M.

2015-01-01

The role of La+3/Sr+2 ratios, which is varied from 0.08 to 5.09, on density, molar volume, packing fraction, free volume, thermal and electrical properties in strontium lanthanum aluminoborosilicate based glass sealants intended for solid oxide fuel cell (SOFC) applications is evaluated. The studies reveal expansion of the glass network evident from increasing molar volume and decreasing packing fraction of glasses with progressive La+3 substitutions. The molecular origin of these macroscopic structural features can be accounted for by the free volume parameters measured from positron annihilation lifetime spectroscopy (PALS). The La+3 induced expanded glass networks show increased number of subnanoscopic voids with larger sizes, as revealed from the ortho-positronium (o-Ps) lifetime and its intensity. A remarkably direct correspondence between the molar volume and fractional free volume trend is established with progressive La2O3 substitution in the glasses. The effect of these structural changes on the glass transition temperature, softening temperature, coefficient of thermal expansion, thermal stability as well as electrical conductivity has been studied.

Impacted lower third molars and distal caries in the mandibular second molar. Is prophylactic removal of lower third molars justified?

PubMed

Marques, José; Montserrat-Bosch, Marta; Figueiredo, Rui; Vilchez-Pérez, Miguel-Angel; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2017-06-01

The objective of this study was to evaluate the association between the presence of mandibular third molars and the occurrence of carious lesions in the distal aspect of the mandibular second molar. A retrospective cohort study comprising 327 lower third molars extracted in the Oral Surgery and Implantology Master's Degree program of the School of Dentistry of the University of Barcelona (Barcelona, Spain) was carried out. A descriptive and bivariate analysis was made. The diagnosis of caries in the second molar and the position of the mandibular third molar were evaluated through panoramic radiographies. The sample included 203 patients, 94 males (46.3%) and 109 females (53.7%), with a mean age of 26,8 years and 327 lower third molars. The prevalence of second molar distal caries was 25.4% (95% CI= 20.6% to 30.2%). This pathology was significantly more frequent when the third molar was in a horizontal position (27.7%), when the contact point was at (45,8%) or below (47.0%) the cementoenamel junction (CEJ), and when the distal CEJ of the mandibular second molar and the mesial CEJ of the third molar was 7 to 12 mm apart. Horizontal lower third molars with contact points at or below the CEJ are more likely to produce distal caries in the mandibular second molars. Due to the high prevalence of this pathology (20.6% to 30.2%), a prophylactic removal of lower third molars with the above-mentioned features might be advisable. Key words: Second molar, caries, third molar, prophylactic removal.

A new mixed-ligand copper(II) complex of (E)-N";-(2-hydroxybenzylidene) acetohydrazide: Synthesis, characterization, NLO behavior, DFT calculation and biological activities

NASA Astrophysics Data System (ADS)

Yousef Ebrahimipour, S.; Sheikhshoaie, Iran; Crochet, Aurelien; Khaleghi, Moj; Fromm, Katharina M.

2014-08-01

A tridentate hydrazone Schiff base ligand, (E)-N";-(2-hydroxybenzylidene)acetohydrazide [HL], and its mixed-ligand Cu(II) complex [CuL(phen)], have been synthesized and characterized by elemental analyses, FT-IR, molar conductivity, UV-Vis spectroscopy. The structure of the complex has been determined by X-ray diffraction. This complex has square pyramidal geometry and the positions around central atom are occupied with donor atoms of Schiff base ligand and two nitrogens of 1,10-phenanthroline. Computational studies of compounds were performed by using DFT calculations. The linear polarizabilities and first hyperpolarizabilities of the studied molecules indicate that these compounds can be good candidates of nonlinear optical materials. It is in accordance with experimental data. In addition, invitro antimicrobial results show that these compounds specially [CuL(phen)] have great potential of antibacterial activity against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Listeria monocytogenes bacteria and antifungal activity against Candida Albicans in comparison to some standard drugs.

Synthesis, antimicrobial, antioxidant and molecular docking studies of thiophene based macrocyclic Schiff base complexes

NASA Astrophysics Data System (ADS)

Rathi, Parveen; Singh, D. P.

2015-11-01

The macrocyclic complexes of pharmaceutical importance with trivalent transition metals have been synthesized by [1 + 1] condensation of succinyldihydrazide and thiophenedicarboxaldehyde, via template method, resulting in the formation of the complex [MLX] X2; where L is (C10H10N4O2S), a macrocyclic ligand, M = Cr (III) and Fe (III) and X = Cl-, CH3COO- or NO3- . These complexes have been characterized with the help of elemental analyses, molar conductance measurements, magnetic susceptibility measurements, ultraviolet, infrared, far infrared, electron spin resonance, mass spectral studies and powder x-ray diffraction analysis. On the basis of all these studies, mononuclear complexes having 1:2 electrolytic nature with a five coordinated square pyramidal geometry have been proposed. Powder diffraction XRD indicates the presence of triclinic crystal system with p bravais lattice for the representative complex. All the metal complexes have also been explored for their in vitro antimicrobial and antioxidant activities.

Mosaic Convergence of Rodent Dentitions

PubMed Central

Lazzari, Vincent; Charles, Cyril; Tafforeau, Paul; Vianey-Liaud, Monique; Aguilar, Jean-Pierre; Jaeger, Jean-Jacques; Michaux, Jacques; Viriot, Laurent

2008-01-01

Background Understanding mechanisms responsible for changes in tooth morphology in the course of evolution is an area of investigation common to both paleontology and developmental biology. Detailed analyses of molar tooth crown shape have shown frequent homoplasia in mammalian evolution, which requires accurate investigation of the evolutionary pathways provided by the fossil record. The necessity of preservation of an effective occlusion has been hypothesized to functionally constrain crown morphological changes and to also facilitate convergent evolution. The Muroidea superfamily constitutes a relevant model for the study of molar crown diversification because it encompasses one third of the extant mammalian biodiversity. Methodology/Principal Findings Combined microwear and 3D-topographic analyses performed on fossil and extant muroid molars allow for a first quantification of the relationships between changes in crown morphology and functionality of occlusion. Based on an abundant fossil record and on a well resolved phylogeny, our results show that the most derived functional condition associates longitudinal chewing and non interlocking of cusps. This condition has been reached at least 7 times within muroids via two main types of evolutionary pathways each respecting functional continuity. In the first type, the flattening of tooth crown which induces the removal of cusp interlocking occurs before the rotation of the chewing movement. In the second type however, flattening is subsequent to rotation of the chewing movement which can be associated with certain changes in cusp morphology. Conclusion/Significance The reverse orders of the changes involved in these different pathways reveal a mosaic evolution of mammalian dentition in which direction of chewing and crown shape seem to be partly decoupled. Either can change in respect to strong functional constraints affecting occlusion which thereby limit the number of the possible pathways. Because convergent pathways imply distinct ontogenetic trajectories, new Evo/Devo comparative studies on cusp morphogenesis are necessary. PMID:18974837

Pre- and Postnatal Determinants of Deciduous Molar Hypomineralisation in 6-Year-Old Children. The Generation R Study

PubMed Central

Elfrink, Marlies E. C.; Moll, Henriette A.; Kiefte-de Jong, Jessica C.; Jaddoe, Vincent W. V.; Hofman, Albert; ten Cate, Jacob M.; Veerkamp, Jaap S. J.

2014-01-01

Background Deciduous Molar Hypomineralisation (DMH) and Molar Incisor Hypomineralisation (MIH) are common developmental disturbances in pediatric dentistry. Their occurrence is related. The same determinants as suggested for MIH are expected for DMH, though somewhat earlier in life. Perinatal medical problems may influence the prevalence of DMH but this has not been studied sufficiently. Objective This study aimed to identify possible determinants of DMH in a prospective cohort study among 6-year-old children. Study Design This study was embedded in the Generation R Study, a population-based prospective cohort study from fetal life until young adulthood. The the data were used to identify the determinants of DMH. Clinical photographs of clean, moist teeth were taken with an intra-oral camera in 6690 children (mean age 6.2 years; 49.9% girls). Data on possible determinants that had occurred during pregnancy and/or the child's first year of life were on the basis of manual standardized measurements (like length and weight) and questionnaires. Multivariate analyse with backward and forward selection was performed. Results A number of factors in the pre-, peri- and postnatal phase were found to be associated with DMH. After multivariate logistic regression analyses, Dutch ethnic background, low birth weight, maternal alcohol consumption during pregnancy, and fever episodes in the first year of the child's life were found to play a role in the development of DMH in 6-year-old children. Conclusion This study shows that Dutch ethnicity, low birth weight, alcohol consumption by the mother during pregnancy and any fever in the first year of the child's life are associated with DMH. Not only childhood factors but also prenatal lifestyle factors need to be taken into account when studying determinants for DMH. PMID:24988443

Force system generated by elastic archwires with vertical V bends: a three-dimensional analysis.

PubMed

Upadhyay, Madhur; Shah, Raja; Peterson, Donald; Asaki, Takafumi; Yadav, Sumit; Agarwal, Sachin

2017-04-01

Our previous understanding of V-bend mechanics is primarily from two-dimensional (2D) analysis of archwire bracket interactions in the second order. These analyses do not take into consideration the three-dimensional (3D) nature of orthodontic appliances involving the third order. To quantify the force system generated in a 3D two bracket set up involving the molar and incisors with vertical V-bends. Maxillary molar and incisor brackets were arranged in a dental arch form and attached to load cells capable of measuring forces and moments in all three planes (x, y, and z) of space. Symmetrical V-bends (right and left sides) were placed at 11 different locations along rectangular beta-titanium archwires of various sizes at an angle of 150degrees. Each wire was evaluated for the 11 bend positions. Specifically, the vertical forces (Fz) and anterio-posterior moments (Mx) were analysed. Descriptive statistics were used to interpret the results. With increasing archwire size, Fz and Mx increased at the two brackets (P < 0.05). The vertical forces were linear and symmetric in nature, increasing in magnitude as the bends moved closer to either bracket. The Mx curves were asymmetric and non-linear displaying higher magnitudes for molar bracket. As the bends were moved closer to either bracket a distinct flattening of the incisor Mx curve was noted, implying no change in its magnitude. This article provides critical information on V-bend mechanics involving second order and third order archwire-bracket interactions. A model for determining this force system is described that might allow for easier translation to actual clinical practice. © The Author 2016. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage

PubMed Central

Kang, Ju-Man; Park, Jae Hyun; Bayome, Mohamed; Oh, Moonbee; Park, Chong Ook; Mo, Sung-Seo

2016-01-01

Objective This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization. PMID:27668192

Structural characterization of an acetylated glucomannan with antiinflammatory activity and gastroprotective property from Cyrtopodium andersonii.

PubMed

Parente, José P; Adão, Camila R; da Silva, Bernadete P; Tinoco, Luzineide W

2014-06-04

A polysaccharide with an estimated weight-average molar mass of 5.35×10(5) was obtained from an aqueous extract of pseudobulbs of Cyrtopodium andersonii R. Br. It was composed of d-glucose and d-mannose in 1:3 molar ratio. Chemical and spectroscopic analyses revealed a linear structure of the polymer with a backbone composed of (1→4)-linked β-d-glucopyranosyl and mannopyranosyl units slightly branched at C-2, C-3, and C-6 by side chains, as terminal non reducing residues of d-mannopyranose and d-glucopyranose. It was found to contain 14.6% of acetyl groups substituted at C-2 of (1→4)-linked β-d-mannopyranosyl units. The acetylated glucomannan demonstrated antiinflammatory and antiulcerogenic activities. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cone-beam Computed Tomographic Study of Root Anatomy and Canal Configuration of Molars in a Spanish Population.

PubMed

Pérez-Heredia, Mercedes; Ferrer-Luque, Carmen María; Bravo, Manuel; Castelo-Baz, Pablo; Ruíz-Piñón, Manuel; Baca, Pilar

2017-09-01

The aim of this study was to identify morphologic peculiarities of roots and analyze the root canal configuration in maxillary and mandibular first and second molars by means using cone-beam computed tomographic (CBCT) imaging in a Spanish population. A total of 284 maxillary molars and 242 mandibular molars from 112 patients were examined in vivo by CBCT imaging; only untreated molars with healthy and fully matured apices were included in this study. Details regarding the number of roots, number of canals, and root canal configuration were recorded. Maxillary first and second molars had 3 roots in 97.2% and 79%, respectively. In mandibular molars, the frequency of 2 roots was 94% in first molars and 83% in second molars. The canal configuration of the palatal root was 100% Vertucci type I (1-1) in first and second molars. The distobuccal root showed a Vertucci type I configuration in 97% of first and 100% of maxillary second molars. The mesiobuccal root for first molars showed a Vertucci type II configuration (2-1) in 56.5% cases and Vertucci type IV (2-2) in 23.2%. For maxillary second molars, the Vertucci type I configuration reached 52.7%. In mandibular molars, the mesial root showed higher variability. Most frequent was the presence of 2 canals, Vertucci type II for first and second molars. In the distal root, the most common configuration was Vertucci type I in both molars. The greater percentage of fused roots was observed in maxillary molars. Vertucci type II configuration was more frequent than type IV in the mesial root of mandibular molars and the mesiobuccal root of maxillary molars. A third canal in the mesial root of first mandibular molars (6.7%) was higher than expected. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Quantitative analysis of the orthodontic and orthopedic effects of maxillary traction.

PubMed

Baumrind, S; Korn, E L; Isaacson, R J; West, E E; Molthen, R

1983-11-01

This article analyzes differences in displacement of ANS and of the upper first molar when different vectors of force are delivered to the maxilla in non-full-banded Phase I mixed-dentition treatment of Class II malocclusion. The sample is identical to that for which we have previously reported differences in change in several key measures of mandibular and facial shape. It includes a cervical-traction group, a high-pull-to-upper-molar group, a modified-activator group, and an untreated Class II control group. Using newly developed computer-conducted procedures, which are described, we have been able to partition the orthodontic and orthopedic components of upper molar displacement and also to isolate treatment effects from those attributable to spontaneous growth and development. In the region of ANS, small but statistically significant and clinically meaningful differences were noted between treatments. When the intercurrent effects of growth and development had been factored out (Table III), orthopedic distal displacement of ANS was significantly greater in the high-pull and cervical groups than in the activator group. Orthopedic downward displacement of ANS was seen to be significantly greater in the cervical group than in the high-pull and activator groups. In the region of the first molar cusp, mean distal displacement of the tooth as an orthopedic effect was found to be almost identical in the cervical and high-pull groups (although variability was greater in the cervical group), but the mean orthodontic effect was significantly greater in the high-pull group than in the cervical group. In the cervical group, where relatively light forces were used for relatively long treatment periods on average, more of the total distal displacement of the upper molar was of an orthopedic character than of an orthodontic character. Conversely, in the high-pull group, in which relatively heavier forces tended to be used for briefer treatment periods, most of the distal displacement at the upper molar was of an orthodontic character. These observations are contrary to expectations from conventional orthodontic theory. In the activator-treated group, roughly equal components of the treatment-associated distal displacement of the upper molar were of the orthodontic and orthopedic types. As concerns changes in the vertical direction in the region of the molar cusp, significant intrusion of both the orthopedic and orthodontic types was seen in the high-pull sample as compared to each of the other groups examined.(ABSTRACT TRUNCATED AT 400 WORDS)

Impacted lower third molars and distal caries in the mandibular second molar. Is prophylactic removal of lower third molars justified?

PubMed Central

Marques, José; Montserrat-Bosch, Marta; Vilchez-Pérez, Miguel-Angel; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2017-01-01

Background The objective of this study was to evaluate the association between the presence of mandibular third molars and the occurrence of carious lesions in the distal aspect of the mandibular second molar. Material and Methods A retrospective cohort study comprising 327 lower third molars extracted in the Oral Surgery and Implantology Master’s Degree program of the School of Dentistry of the University of Barcelona (Barcelona, Spain) was carried out. A descriptive and bivariate analysis was made. The diagnosis of caries in the second molar and the position of the mandibular third molar were evaluated through panoramic radiographies. Results The sample included 203 patients, 94 males (46.3%) and 109 females (53.7%), with a mean age of 26,8 years and 327 lower third molars. The prevalence of second molar distal caries was 25.4% (95% CI= 20.6% to 30.2%). This pathology was significantly more frequent when the third molar was in a horizontal position (27.7%), when the contact point was at (45,8%) or below (47.0%) the cementoenamel junction (CEJ), and when the distal CEJ of the mandibular second molar and the mesial CEJ of the third molar was 7 to 12 mm apart. Conclusions Horizontal lower third molars with contact points at or below the CEJ are more likely to produce distal caries in the mandibular second molars. Due to the high prevalence of this pathology (20.6% to 30.2%), a prophylactic removal of lower third molars with the above-mentioned features might be advisable. Key words:Second molar, caries, third molar, prophylactic removal. PMID:28638558

Ionic association and solvation of the ionic liquid 1-hexyl-3-methylimidazolium chloride in molecular solvents revealed by vapor pressure osmometry, conductometry, volumetry, and acoustic measurements.

PubMed

Sadeghi, Rahmat; Ebrahimi, Nosaibah

2011-11-17

A systematic study of osmotic coefficient, conductivity, volumetric and acoustic properties of solutions of ionic liquid 1-hexyl-3-methylimidazolium chloride ([C(6)mim][Cl]) in various molecular solvents has been made at different temperatures in order to study of ionic association and solvation behavior of [C(6)mim][Cl] in different solutions. Precise measurements on electrical conductances of solutions of [C(6)mim][Cl] in water, methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and acetonitrile at 293.15, 298.15, and 303.15 K are reported and analyzed with Barthel's low-concentration chemical model (lcCM) to obtain the limiting molar conductivities and association constants of this ionic liquid in the investigated solvents. Strong ion pairing was found for the ionic liquid in 2-propanol, 1-butanol, and 1-propanol, whereas ion association in acetonitrile, methanol and ethanol is rather weak and in water the ionic liquid is fully dissociated. In the second part of this work, the apparent molar volumes and isentropic compressibilities of [C(6)mim][Cl] in water, methanol, ethanol, acetonitrile, 1-propanol, 2-propanol, and 1-butanol are obtained at the 288.15-313.15 K temperature range at 5 K intervals at atmospheric pressure from the precise measurements of density and sound velocity. The infinite dilution apparent molar volume and isentropic compressibility values of the free ions and ion pairs of [C(6)mim][Cl] in the investigated solvents as well as the excess molar volume of the investigated solutions are determined and their variations with temperature and type of solvents are also studied. Finally, the experimental measurements of osmotic coefficient at 318.15 K for binary solutions of [C(6)mim][Cl] in water, methanol, ethanol, 2-propanol, and acetonitrile are taken using the vapor pressure osmometry (VPO) method and from which the values of the solvent activity, vapor pressure, activity coefficients, and Gibbs free energies are calculated. The results are interpreted in terms of ion association, ion-dipole interactions, and structural factors of the ionic liquid and investigated organic solvents. The ionic liquid is solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation.

Predictive model of third molar eruption after second molar extraction.

PubMed

De-la-Rosa-Gay, Cristina; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2010-03-01

Extraction of second permanent molars is an option for providing space in orthodontic treatment. Although many articles have described its impact on the outcome, there are few data on the prognosis of the eruption of the adjacent third molars. The aims of this investigation were to provide predictive models of eruption of third molars after second permanent molar extraction and to validate them. A total of 48 patients (ages, 11-23 years) who had 128 second permanent molars (54 maxillary, 74 mandibular) extracted during orthodontic treatment were followed until eruption of the third molars was complete. A lineal regression model predicted the final angle of the third molars with the permanent first molar by using the variables of initial angle, jaw, and the developmental stage of the third molar. A logistic regression model predicted the probability of correct eruption by using the variables of initial angle, jaw, sex, age, and the developmental stage of the third molar. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Heterogeneous photocatalytic degradation of gallic acid under different experimental conditions.

PubMed

Quici, Natalia; Litter, Marta I

2009-07-01

UV/TiO(2)-heterogeneous photocatalysis was tested as a process to degrade gallic acid (Gal) in oxygenated solutions at pH 3. In the absence of oxidants other than oxygen, decay followed a zero order rate at different concentrations and was slow at concentrations higher than 0.5 mM. Addition of Fe(3+), H(2)O(2) and the combination Fe(3+)/H(2)O(2) improved Gal degradation. In the absence of H(2)O(2), an optimal Fe : Gal molar ratio of 0.33 : 1 was found for the photocatalytic decay, beyond which addition of Fe(3+) was detrimental and even worse in comparison with the system in the absence of Fe(3+). TiO(2) addition was beneficial compared with the same system in the absence of the photocatalyst if Fe(3+) was added at low concentration (0.33 : 1 Fe : Gal molar ratio), while at high concentration (1 : 1 Fe : Gal molar ratio) TiO(2) did not exert any significant effect. H(2)O(2) addition (1 : 0.33 Gal : H(2)O(2) molar ratio, absence of Fe(iii)) also enhanced the heterogeneous photocatalytic reaction. Simultaneous addition of Fe(3+) and H(2)O(2) was more effective than the addition of the separate oxidants. This system was compared with Fenton and photo-Fenton systems. At low H(2)O(2) concentration (0.33 : 1 : 0.2 Fe : Gal : H(2)O(2) molar ratio), the presence of TiO(2) also enhanced the reaction. The influence of the thermal charge transfer reaction between Gal and Fe(iii), which leads to an important Gal depletion in the dark with formation of quinones, was analysed. The mechanisms taking place in these complex systems are proposed, paying particular attention to the important charge transfer reaction of the Fe(iii)-Gal complex operative in dark conditions.

Orthodontic space closure without counterbalancing extractions in patients with bilateral aplasia of the lower second premolars.

PubMed

Zimmer, Bernd; Rottwinkel, Yvonne

2002-09-01

Orthodontic space closure in situations with bilateral aplastic lower second premolars without maxillary extractions is a rarely practiced treatment method. Due to the high risk of severe side effects, preference is currently given to the maintenance of deciduous second molars and subsequent prosthodontic solutions. As a combination of Class I push and Class II pull mechanics seemed likely to reduce secondary effects by transferring the anchorage site from the reactive lower anterior teeth to the more resistant upper arch, a clinical study was carried out in order to investigate effects and secondary effects of the mechanics. Casts, panoramic radiographs and lateral headfilms of 13 consecutively treated, non-selected adolescents (seven boys, six girls, mean age at start of treatment 13 years 4 months) were evaluated. In six patients a Jasper Jumper trade mark was inserted in addition for a mean period of 6 months. The treatment outcome after a mean period of 3 years and 1 month showed in almost all cases the desired Class III molar occlusion of one cusp width (+/- 1/4 cw) with overbite and overjet within the normal range. Analyses of static and dynamic occlusion revealed anterior/canine protected articulation and a satisfactory number of centric contact points. A significant space gain (p

Study the chemical composition and biological outcomes resulting from the interaction of the hormone adrenaline with heavy elements: Infrared, Raman, electronic, 1H NMR, XRD and SEM studies

NASA Astrophysics Data System (ADS)

Ibrahim, Omar B.; Mohamed, Mahmoud A.; Refat, Moamen S.

2014-01-01

Heavy metal adrenaline complexes formed from the reaction of adrenaline with Al3+, Zn2+, Sn2+, Sb3+, Pb2+and Bi3+ ions in methanolic solvent at 60 °C. The final reaction products have been isolated and characterization using elemental analyses (% of carbon, hydrogen and nitrogen), conductivity measurements, mid infrared, Raman laser, UV-Vis, 1H NMR spectra, X-ray powder diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDX). Upon the spectroscopic, conductivity and elemental analyses, the stoichiometric reactions indicated that the data obtained refer to 1:2 (M:L) for Zn2+, Sn2+, Pb2+and Bi3+ complexes [Zn(Adr)2(Cl)2], [Sn(Adr)2]Cl2, [Pb(Adr)2](NO3)2 and [Bi(Adr)2(Cl)2]Cl, while the molar ratio 1:3 (M:L) for Al3+ and Sb3+ with formulas [Al(Adr)3](NO3)3 and [Sb(Adr)3]Cl3. The infrared and Raman laser spectra interpreted the mode of interactions which associated through the two phenolic groups of catechol moiety. The adrenaline chelates have been screened for their in vitro antibacterial activity against four bacteria, Gram-positive (Bacillus subtilis and Staphylococcus aureus) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and two strains of fungus (Aspergillus flavus and Candida albicans). The metal chelates were shown to possess more antibacterial and antifungal activities than the free adrenaline chelate.

Correction of a mutilated dentition with mini-implants as anchorage.

PubMed

Hyun, Jae-Man; Kim, Tae-Woo

2010-11-01

The patient was an adolescent boy, aged 15.6 years, with a mutilated dentition. He had extrusion of the maxillary left first molar because of loss of the mandibular first molar and lingual tilting and rotation of the mandibular second molars. Both left and right second molars were in scissors-bite that was more severe on the left side. By using mini-implants and a TPA with hooks, a 3-mm intrusion was successfully made on the maxillary left first molar. This provided room for mesial movement of the mandibular left second molar. The second molar was protracted into the space of the missing first molar, and the mandibular left third molar was positioned in place of the second molar. The second molars scissors-bite was corrected. Active treatment took 45 months, and the treatment result remained stable 2 years after debonding. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Lingual vs. labial fixed orthodontic appliances: systematic review and meta-analysis of treatment effects.

PubMed

Papageorgiou, Spyridon N; Gölz, Lina; Jäger, Andreas; Eliades, Theodore; Bourauel, Christoph

2016-04-01

The aim of this systematic review was to compare the therapeutic and adverse effects of lingual and labial orthodontic fixed appliances from clinical trials on human patients in an evidence-based manner. Randomized and prospective non-randomized clinical trials comparing lingual and labial appliances were included. Risk of bias within and across studies was assessed using the Cochrane tool and the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach. Random-effects meta-analyses were conducted, followed by subgroup and sensitivity analyses. Six electronic databases were searched from inception to July 2015, without limitations. A total of 13 papers pertaining to 11 clinical trials were included with a total of 407 (34% male/66% female) patients. Compared with labial appliances, lingual appliances were associated with increased overall oral discomfort, increased speech impediment (measured using auditory analysis), worse speech performance assessed by laypersons, increased eating difficulty, and decreased intermolar width. On the other hand, lingual appliances were associated with increased intercanine width and significantly decreased anchorage loss of the maxillary first molar during space closure. Based on existing trials, there is insufficient evidence to make robust recommendations for lingual fixed orthodontic appliances regarding their therapeutic or adverse effects, as the quality of evidence was low. © 2016 Eur J Oral Sci.

Synthesis and Characterization of Al-Doped Mg2Si Thermoelectric Materials

NASA Astrophysics Data System (ADS)

Battiston, S.; Fiameni, S.; Saleemi, M.; Boldrini, S.; Famengo, A.; Agresti, F.; Stingaciu, M.; Toprak, M. S.; Fabrizio, M.; Barison, S.

2013-07-01

Magnesium silicide (Mg2Si)-based alloys are promising candidates for thermoelectric (TE) energy conversion for the middle to high range of temperature. These materials are very attractive for TE research because of the abundance of their constituent elements in the Earth's crust. Mg2Si could replace lead-based TE materials, due to its low cost, nontoxicity, and low density. In this work, the role of aluminum doping (Mg2Si:Al = 1: x for x = 0.005, 0.01, 0.02, and 0.04 molar ratio) in dense Mg2Si materials was investigated. The synthesis process was performed by planetary milling under inert atmosphere starting from commercial Mg2Si pieces and Al powder. After ball milling, the samples were sintered by means of spark plasma sintering to density >95%. The morphology, composition, and crystal structure of the samples were characterized by field-emission scanning electron microscopy, energy-dispersive spectroscopy, and x-ray diffraction analyses. Moreover, Seebeck coefficient analyses, as well as electrical and thermal conductivity measurements were performed for all samples up to 600°C. The resultant estimated ZT values are comparable to those reported in the literature for these materials. In particular, the maximum ZT achieved was 0.50 for the x = 0.01 Al-doped sample at 600°C.

Function of pretribosphenic and tribosphenic mammalian molars inferred from 3D animation

NASA Astrophysics Data System (ADS)

Schultz, Julia A.; Martin, Thomas

2014-10-01

Appearance of the tribosphenic molar in the Late Jurassic (160 Ma) is a crucial innovation for food processing in mammalian evolution. This molar type is characterized by a protocone, a talonid basin and a two-phased chewing cycle, all of which are apomorphic. In this functional study on the teeth of Late Jurassic Dryolestes leiriensis and the living marsupial Monodelphis domestica, we demonstrate that pretribosphenic and tribosphenic molars show fundamental differences of food reduction strategies, representing a shift in dental function during the transition of tribosphenic mammals. By using the Occlusal Fingerprint Analyser (OFA), we simulated the chewing motions of the pretribosphenic Dryolestes that represents an evolutionary precursor condition to such tribosphenic mammals as Monodelphis. Animation of chewing path and detection of collisional contacts between virtual models of teeth suggests that Dryolestes differs from the classical two-phased chewing movement of tribosphenidans, due to the narrowing of the interdental space in cervical (crown-root transition) direction, the inclination angle of the hypoflexid groove, and the unicuspid talonid. The pretribosphenic chewing cycle is equivalent to phase I of the tribosphenic chewing cycle, but the former lacks phase II of the tribosphenic chewing. The new approach can analyze the chewing cycle of the jaw by using polygonal 3D models of tooth surfaces, in a way that is complementary to the electromyography and strain gauge studies of muscle function of living animals. The technique allows alignment and scaling of isolated fossil teeth and utilizes the wear facet orientation and striation of the teeth to reconstruct the chewing path of extinct mammals.

Function of pretribosphenic and tribosphenic mammalian molars inferred from 3D animation.

PubMed

Schultz, Julia A; Martin, Thomas

2014-10-01

Appearance of the tribosphenic molar in the Late Jurassic (160 Ma) is a crucial innovation for food processing in mammalian evolution. This molar type is characterized by a protocone, a talonid basin and a two-phased chewing cycle, all of which are apomorphic. In this functional study on the teeth of Late Jurassic Dryolestes leiriensis and the living marsupial Monodelphis domestica, we demonstrate that pretribosphenic and tribosphenic molars show fundamental differences of food reduction strategies, representing a shift in dental function during the transition of tribosphenic mammals. By using the Occlusal Fingerprint Analyser (OFA), we simulated the chewing motions of the pretribosphenic Dryolestes that represents an evolutionary precursor condition to such tribosphenic mammals as Monodelphis. Animation of chewing path and detection of collisional contacts between virtual models of teeth suggests that Dryolestes differs from the classical two-phased chewing movement of tribosphenidans, due to the narrowing of the interdental space in cervical (crown-root transition) direction, the inclination angle of the hypoflexid groove, and the unicuspid talonid. The pretribosphenic chewing cycle is equivalent to phase I of the tribosphenic chewing cycle, but the former lacks phase II of the tribosphenic chewing. The new approach can analyze the chewing cycle of the jaw by using polygonal 3D models of tooth surfaces, in a way that is complementary to the electromyography and strain gauge studies of muscle function of living animals. The technique allows alignment and scaling of isolated fossil teeth and utilizes the wear facet orientation and striation of the teeth to reconstruct the chewing path of extinct mammals.

Posterior dental size reduction in hominids: the Atapuerca evidence.

PubMed

Bermúdez de Castro, J M; Nicolas, M E

1995-04-01

In order to reassess previous hypotheses concerning dental size reduction of the posterior teeth during Pleistocene human evolution, current fossil dental evidence is examined. This evidence includes the large sample of hominid teeth found in recent excavations (1984-1993) in the Sima de los Huesos Middle Pleistocene cave site of the Sierra de Atapuerca (Burgos, Spain). The lower fourth premolars and molars of the Atapuerca hominids, probably older than 300 Kyr, have dimensions similar to those of modern humans. Further, these hominids share the derived state of other features of the posterior teeth with modern humans, such as a similar relative molar size and frequent absence of the hypoconulid, thus suggesting a possible case of parallelism. We believe that dietary changes allowed size reduction of the posterior teeth during the Middle Pleistocene, and the present evidence suggests that the selective pressures that operated on the size variability of these teeth were less restrictive than what is assumed by previous models of dental reduction. Thus, the causal relationship between tooth size decrease and changes in food-preparation techniques during the Pleistocene should be reconsidered. Moreover, the present evidence indicates that the differential reduction of the molars cannot be explained in terms of restriction of available growth space. The molar crown area measurements of a modern human sample were also investigated. The results of this study, as well as previous similar analyses, suggest that a decrease of the rate of cell proliferation, which affected the later-forming crown regions to a greater extent, may be the biological process responsible for the general and differential dental size reduction that occurred during human evolution.

Treatability of nonylphenol ethoxylate surfactants in on-site wastewater disposal systems.

PubMed

Huntsman, Brent E; Staples, Charles A; Naylor, Carter G; Williams, Jim-Bob

2006-11-01

The fate of nine-mole nonylphenol ethoxylate (NPE9) discharged to an on-site wastewater disposal (septic) system was the focus of a 2-year investigation. Known amounts of NPE9-based detergent were metered daily into the plumbing at a single-family household. The ethoxylate-containing wastewater was discharged to the highly anoxic environment of a 4500-L septic tank before distribution to the oxic subsurface via 100 m of leach line. After 180 days of injecting detergent to the septic system, periodic soil pore water and/or groundwater samples were collected and analyzed for nonylphenol ethoxylates (NPEs), nonylphenol ether carboxylates, and nonylphenol. The NPE9 and degradation intermediates that were measured were reduced by 99.99% on a molar basis. An 18% reduction in molar concentration within the septic tank was observed. This was followed by a further 96.7% reduction of molar concentration within the leach lines. As the pore water migrated through the vadose zone, an additional 99.69% reduction in molar concentration was measured between the bottom of the leach lines (leach line effluent) and the lowest vadose zone monitoring location. The results obtained from these analyses indicate that degradation of the surfactant occurs within the anoxic portion of the disposal system with continued rapid biodegradation in the oxic unsaturated zone. Only trace amounts of degradation residuals were detected in soil pore water. The concentration and distribution of various degradation intermediates with respect to location, time, and ambient physical conditions were evaluated. Rapid and systematic degradation of NPE in on-site wastewater disposal systems was documented.

Knowledge, management and perceived barriers to treatment of molar-incisor hypomineralisation in general dental practitioners and dental nurses in Malaysia.

PubMed

Hussein, A S; Ghanim, A M; Abu-Hassan, M I; Manton, D J

2014-10-01

Molar-incisor hypomineralisation (MIH) is a global dental problem, yet little is known about the knowledge of the general dental practitioners (GDPs) and dental nurses (DNs) regarding this defect in South East Asia. To assess and compare the knowledge of the GDPs and DNs in Malaysia regarding the frequency of occurrence of MIH within their practice, its diagnosis, putative aetiological factors and management. A questionnaire was distributed to GDPs and DNs during a nationwide dental conference in Melaka, Malaysia and who were asked to answer questions about demographic variables, knowledge, attitudes and practices in the management of MIH. Descriptive statistics and bivariate analysis were performed. A 5% level of statistical significance was applied for the analyses. A response rate of 58.2% (131/225) was obtained. Most respondents were aware of MIH and encountered it in their practice (GDPs = 82.5%, DNs = 82.4%). The condition was observed by respondents less in primary molars compared to first permanent molars. Full agreement between GDPs and DNs did not exist concerning the aetiological factors and management of MIH. Glass ionomer cements were the most popular material used in treating MIH. Most respondents (GDPs = 93%, DNs = 76.5%) indicated that they had not received sufficient information about MIH and were willing to have clinical training in the diagnosis and therapeutic modalities of MIH. MIH is identified and encountered by most respondents. Agreement did not exist between GDPs and DNs concerning MIH frequency of occurrence within their practice, its diagnosis, aetiological factors and management.

Chemical thermodynamics of ultrasound speed in solutions and liquid mixtures.

PubMed

Reis, João Carlos R; Santos, Angela F S; Lampreia, Isabel M S

2010-02-01

A comprehensive formalism is developed to treat thermodynamically speed of ultrasound data for solutions and liquid mixtures. For solutions, the apparent speed of ultrasound of a solute is introduced and proposed to take the place of empirically defined quantities. The partial speed of ultrasound of a solute is defined and related to the partial molar volume and partial molar isentropic compression. For liquid mixtures, the concept of speed of sound before mixing pure liquids is presented and used to define the change in speed of ultrasound upon ideal mixing, which is predicted to be generally a negative quantity. A new thermodynamic equation is derived linking the values for excess speed of ultrasound, excess molar volume and excess molar isentropic compression of a mixture, and its applications are discussed. Ideal and excess apparent speeds of ultrasound, as well as ideal and excess partial speeds of ultrasound, are defined for substances making up a liquid mixture. Accurate speeds of ultrasound in 31 mixtures of water with the amphiphile 2-(ethylamino)ethanol at 293.15 K are reported. These data are used to demonstrate the ability of the apparent speed of ultrasound to describe the impact of solutes on sonic properties of solutions and the advantages of analysing thermodynamic properties of binary liquid mixtures in terms of the dependence on composition of Balankina's ratios between excess and ideal values. It is concluded that the new thermodynamic functions defined for speeds of ultrasound in solutions and liquid mixtures give, at the least, equivalent information on molecular aspects to the usual functions related to the isentropic compressibility, without needing density data for this purpose.

Age-related changes in molar topography and shearing crest length in a wild population of mountain Gorillas from Volcanoes National Park, Rwanda.

PubMed

Glowacka, Halszka; McFarlin, Shannon C; Catlett, Kierstin K; Mudakikwa, Antoine; Bromage, Timothy G; Cranfield, Michael R; Stoinski, Tara S; Schwartz, Gary T

2016-05-01

Great ape teeth must remain functional over long lifespans. The molars of the most folivorous apes, the mountain gorillas, must maintain shearing function for 40+ years while the animals consume large quantities of mechanically challenging foods. While other folivorous primates experience dental senescence, which compromises their occlusal surfaces and affects their reproductive success as they age, it is unknown whether dental senescence also occurs in mountain gorillas. In this article, we quantified and evaluated how mountain gorilla molars change throughout their long lifespans. We collected high-resolution replicas of M(1)s (n = 15), M(2)s (n = 13), and M(3)s (n = 11) from a cross-sectional sample of wild mountain gorilla skeletons from the Virunga Volcanoes, ranging in age from 4 to 43 years. We employed dental topographic analyses to track how aspects of occlusal slope, angularity, relief index, and orientation patch count rotated change with age. In addition, we measured the relative length of shearing crests in two- and three-dimensions. Occlusal topography was found to decrease, while 2D relative shearing crest length increased, and 3D relative crest lengths were maintained with age. Our findings indicate that shearing function is maintained throughout the long lifetimes of mountain gorillas. Unlike the dental senescence experienced by other folivorous primates, mountain gorillas do not appear to possess senesced molars despite their long lifetimes, mechanically challenging diets, and decreases in occlusal topography with age. © 2016 Wiley Periodicals, Inc.

AXIAL MODIFICATIONS OF PERMANENT LOWER MOLARS AFTER PREMATURE LOSSES OF TEMPORARY MOLARS.

PubMed

Cernei, E R; Mavru, R B; Zetu, Irina Nicoleta

2016-01-01

The aim of our study was to determine the impact of premature loss of temporary lower molars upon the longitudinal axis of the first and second permanent molars. The study groups included 61 patients, 6-9 year olds with premature loss of primary molars and a control group of 24 patients with intact temporary teeth. We evaluated the angle between longitudinal axis of first and second lower permanent molars and occlusal plane. It was observed that premature loss of lower second deciduous molar modifies more the vertical axis of first and second permanent molars than the premature loss of first lower primary molar. Reducing space occurs mainly through mesial inclination of molars that separates the edentulous breach. Temporary loss of both lower first molars on the same quadrant causes an accelerated eruption of both premolars increasing the prevalence of eruption sequence: "4-5-3-7". The preservation of the occlusal morpho-functional complex using space maintainers mainly when the premature loss of the second primary molars occurs is the best interceptive treatment option.

Early extraction of the mandibular third molar in case of eruption disturbances of the second molar.

PubMed

Kavadia, S; Antoniades, K; Kaklamanos, E; Antoniades, V; Markovitsi, E; Zafiriadis, L

2003-01-01

General consensus has been reached on extracting mandibular third molars when they are involved in pathologic processes. However, early extraction is advisable in cases of eruption disturbances of the mandibular second molar, before or during orthodontic treatment. Thirty-two patients with early extraction of the mandibular third molar before or during orthodontic treatment were examined. In these cases either the presence of the third molar presented an obstacle in the eruption path of the second, or third molar germ removal was considered beneficial to the course of orthodontic treatment. Early extraction of the mandibular third molar facilitates the eruption of the second molar, especially in cases where evidence of crowding and lack of space in the posterior mandibular region exist. Orthodontic treatment may, in some cases, aggravate eruption disturbances of the second molar.

Influence of third molar space on angulation and dental arch crowding.

PubMed

Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsuchimochi, Takashi; Ishikawa, Fujiro; Nakahara, Sen

2013-01-01

The influence of the third molars on mandibular incisor crowding has been extensively studied but remains controversial. The purpose of this study was to ascertain whether, in Mongolian subjects, the lower third molar can affect anterior crowding and/or the inclination of teeth in the lower lateral segments. Panoramic radiographs, 45° oblique cephalograms, and dental casts were taken from Mongolian subjects (age range 18.3-24.1 years, mean 21.0 years) exhibiting impaction of all four third molars and an Angle Class I molar relationship. The Ganss ratio was calculated using panoramic radiographs, whereas the gonial angle and angulation of lower canines, premolars and molars were measured using 45° oblique cephalograms. Little's index of irregularity was calculated using dental casts. Significant relationships between the angulation of the third and second molars and between the first molars and second premolars were found. Conversely, there was no significant correlation between the angulation of third molars, first premolars and canines. The Ganss ratio calculations showed that the lower first and second molars and the second premolars inclined mesially if there was insufficient space for the lower third molars. However, there was no significant correlation between Little's index of irregularity and third molar angulation. Furthermore, although the third molar influences the lateral segments, no obvious relationship between the third molar and anterior crowding was observed. Therefore, the angulation of the third molar appears not to cause anterior crowding.

Taking advantage of an unerupted third molar: a case report.

PubMed

Pereira, Igor Figueiredo; Santiago, Fernando Zander Mucci; Sette-Dias, Augusto Cesar; Noronha, Vladimir Reimar Augusto de Souza

2017-01-01

Treatments with dental surgery seek to displace tooth to the correct position within the dental arch. To report a clinical case that took advantage of an unerupted third molar. A male patient, 18 years of age, was referred by his dentist to evaluate the third molars. The clinical exam revealed no visible lower third molars. The computed tomography (CT) exam showed the presence of a supernumerary tooth in the region of the mandibular ramus, on the left side, and impaction of the third molar, which was causing root resorption on the second molar, thus making it impossible to remain in the buccal cavity. The preferred option, therefore, was to remove both second molar and the supernumerary tooth, in addition to attaching a device to the third molar during surgery for further traction. After 12 months, the third molar reached the proper position. When a mandibular second permanent molar shows an atypical root resorption, an impacted third molar can effectively substitute the tooth by using an appropriate orthodontic-surgical approach.

Bilateral maxillary fused second and third molars: a rare occurrence

PubMed Central

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-01-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months. PMID:23222992

Bilateral maxillary fused second and third molars: a rare occurrence.

PubMed

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-12-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months.

Endodontic management of a mandibular third molar fused with a fourth molar.

PubMed

Turell, I L; Zmener, O

1999-05-01

Developmental anomalies in permanent molars frequently require surgical intervention. A case of a mandibular third molar fused with a fourth molar which was successfully treated with conservative endodontic therapy is reported.

Skeletal anchorage for orthodontic correction of severe maxillary protrusion after previous orthodontic treatment.

PubMed

Tanaka, Eiji; Nishi-Sasaki, Akiko; Hasegawa, Takuro; Nishio, Clarice; Kawai, Nobuhiko; Tanne, Kazuo

2008-01-01

The correction of a severe maxillary protrusion in an adult by distal movement of the maxillary molars has been one of the most difficult biomechanical problems in orthodontics. This article reports on the treatment of an adult case of severe maxillary protrusion and a large overjet treated with a skeletal anchorage system. A female patient, age 22 years and 3 months, complained of the difficulty of lip closure due to severe maxillary protrusion with a gummy smile. Overjet and overbite were +7.6 mm and -0.9 mm, respectively. She had a history of orthodontic treatment in which her maxillary first premolars were extracted. In order to conduct distal movement of the maxillary molars, anchor plates were placed in the zygomatic process. After achieving a Class I molar relationship, retraction and intrusion of the maxillary incisors were performed. After a 2-year treatment, an acceptable occlusion was achieved with a Class I molar relationship. Her convex facial profile with upper lip protrusion was considerably improved, and the lips showed less tension in lip closure. After a 2-year retention period, an acceptable occlusion was maintained without recurrence of maxillary protrusion, indicating a stability of the occlusion. The result of this treatment indicated that skeletal anchorage is of great importance as a remedy for achieving intrusion and retraction of the maxillary incisors in cases of severe maxillary protrusion with a patient who had previous orthodontic treatment.

Prenatal and familial factors of caries in first permanent molars in schoolchildren living in urban area of Łódź, Poland.

PubMed

Borowska-Strugińska, Beata; Żądzińska, Elżbieta; Bruzda-Zwiech, Agnieszka; Filipińska, Renata; Lubowiecka-Gontarek, Beata; Szydłowska-Walendowska, Beata; Wochna-Sobańska, Magdalena

2016-06-01

The objective of the present work is to identify the set of prenatal and familial factors that contribute to dental caries of first permanent molars in preschool and young schoolchildren, which will make it possible to determine a high-risk group that should be considered for special preventive measures. This study contributes to the evidence for the multifactorial nature of dental caries. Material was collected during a 2009-2010 study conducted in randomly selected schools and kindergartens in the city of Łódź (Poland). Only children with first permanent molars present were considered for the analysis, which limited the database to 1131 children. Dental examinations were accompanied by a questionnaire completed by the parents, covering items pertaining to prenatal and familial determinants. The present study shows that there are significant differences in the prevalence of caries in first molars between children of different ages (5-13 lat) and that no such differences exist between boys and girls. The prenatal and familial factors conducive to caries include maternal education level (OR=0.55), mode of delivery (OR=0.63) and birth order (OR=0.63). Mothers' smoking habit is also associated with increased caries prevalence in children. Caries prevention should already begin during the prenatal period primarily in respect of mothers with lower educational attainment who are pregnant with a second or subsequent child. Copyright © 2015 Elsevier GmbH. All rights reserved.

An Ex-vivo Shear and tensile bond strengths of orthodontic molar tubes bonded using different techniques.

PubMed

Abu-Alhaija, Elham; Jaradat, Mohammad; Alwahadni, Ahed

2017-03-01

Molar bonding procedures need continuous improvement to be widely accepted clinically and eventually replace molar bands. The purpose of this study was to determine the effects of enamel micro-abrasion and silane coating of the base of molar tubes on shear and tensile bond strengths of orthodontic molar tubes. A total of 200 third molars were randomly allocated into five groups of 40 teeth as follows: group 1: molar tubes bonded to etched teeth (37% phosphoric acid gel; control group); group 2: molar tubes bonded to etched teeth (37% phosphoric acid) with the addition of silane to the base of molar tubes; group 3: molar tubes bonded to teeth pre-treated with 18% hydrochloric acid and pumice (micro-abrasion); group 4: molar tubes bonded to teeth pre-treated with microabrasion with the addition of silane to the base of molar tubes; group 5: molar tubes bonded to teeth pre-treated with microabrasion before conventional acid etching combined with the addition of silane to the base of molar tubes. The bond strength testing was performed using a computer control electromechanical universal testing machine. The highest mean shear and tensile bond strengths were recorded in group 5 (13.81±2.54MPa and 13.97±2.29 MPa, respectively). Micro-abrasion alone (group 3) and the combination of enamel micro-abrasion and the addition of silane (group 4) produced bond strength values comparable to the control. Enamel surface pre-treatment (micro abrasion) before conventional acid etching combined with the addition of silane to the base of the molar tube produced the highest bond strengths among all tested groups. Key words: Molar, shear strength, tensile strength, orthodontic appliances.

An Ex-vivo Shear and tensile bond strengths of orthodontic molar tubes bonded using different techniques

PubMed Central

Alwahadni, Ahed

2017-01-01

Background Molar bonding procedures need continuous improvement to be widely accepted clinically and eventually replace molar bands. Material and Methods The purpose of this study was to determine the effects of enamel micro-abrasion and silane coating of the base of molar tubes on shear and tensile bond strengths of orthodontic molar tubes. A total of 200 third molars were randomly allocated into five groups of 40 teeth as follows: group 1: molar tubes bonded to etched teeth (37% phosphoric acid gel; control group); group 2: molar tubes bonded to etched teeth (37% phosphoric acid) with the addition of silane to the base of molar tubes; group 3: molar tubes bonded to teeth pre-treated with 18% hydrochloric acid and pumice (micro-abrasion); group 4: molar tubes bonded to teeth pre-treated with microabrasion with the addition of silane to the base of molar tubes; group 5: molar tubes bonded to teeth pre-treated with microabrasion before conventional acid etching combined with the addition of silane to the base of molar tubes. The bond strength testing was performed using a computer control electromechanical universal testing machine. Results The highest mean shear and tensile bond strengths were recorded in group 5 (13.81±2.54MPa and 13.97±2.29 MPa, respectively). Micro-abrasion alone (group 3) and the combination of enamel micro-abrasion and the addition of silane (group 4) produced bond strength values comparable to the control. Conclusions Enamel surface pre-treatment (micro abrasion) before conventional acid etching combined with the addition of silane to the base of the molar tube produced the highest bond strengths among all tested groups. Key words:Molar, shear strength, tensile strength, orthodontic appliances. PMID:28298990

Relationship between mandibular condyle and angle fractures and the presence of mandibular third molars.

PubMed

Mah, Deuk-Hyun; Kim, Su-Gwan; Moon, Seong-Yong; Oh, Ji-Su; You, Jae-Seek

2015-02-01

We retrospectively evaluated the impact of mandibular third molars on the occurrence of angle and condyle fractures. This was a retrospective investigation using patient records and radiographs. The sample set consisted of 440 patients with mandibular fractures. Eruption space, depth and angulation of the third molar were measured. Of the 144 angle fracture patients, 130 patients had third molars and 14 patients did not. The ratio of angle fractures when a third molar was present (1.26 : 1) was greater than when no third molar was present (0.19 : 1; odds ratio, 6.58; P<0.001). Of the 141 condyle fractures patients, the third molar was present in 84 patients and absent in 57 patients. The ratio of condyle fractures when a third molar was present (0.56 : 1) was lower than when no third molar was present (1.90 : 1; odds ratio, 0.30; P<0.001). The increased ratio of angle fractures with third molars and the ratio of condyle fractures without a third molar were statistically significant. The occurrence of angle and condyle fractures was more affected by the continuity of the cortical bone at the angle than by the depth of a third molar. These results demonstrate that a third molar can be a determining factor in angle and condyle fractures.

The influence of premature loss of temporary upper molars on permanent molars.

PubMed

Cernei, E R; Maxim, Dana Cristiana; Zetu, Irina Nicoleta

2015-01-01

Premature loss of primary molars due to dental caries and their complications has been associated with space loss and eruptive difficulties, especially when the loss occurs early. The aim of our study was to determine the impact of premature loss of temporary upper molars upon the longitudinal axis of the first and second upper permanent molar. The study group included 64 patients 6-9 years old with premature loss of primary molars and a control group of 48 patients with intact temporary teeth. It was evaluated the angle between longitudinal axis of first and second upper permanent molars and occlusal plane. The sofware used is Easy Dent 4 Viewer®.The data were analyzed by using the Statistical Package for the Social Sciences (version 20.0; SPSS, Chicago, III). It was observed that premature loss of upper second deciduous molars modifies greater the vertical axis of the permanent molars than the premature loss of first upper primary molar. First upper primary molar loss cause an acceleration eruption of first premolar, which will produce a distal inclintion of the both permanent molars. The use of space maintainers after premature loss of the second upper temporary molar is a last solution in preventing tridimensional lesions in the dental arch and occlusion.

Effects of first molar extraction on third molar angulation and eruption space.

PubMed

Bayram, Mehmet; Ozer, Mete; Arici, Selim

2009-02-01

The aim was to investigate the effects of orthodontic treatment with 4 first molar extractions on the angulations and eruption spaces of all third molars and to compare these changes with outcomes of nonextraction samples used as a control group. This study was carried out on standardized panoramic radiographs of 41 subjects (8 male, 33 female) with a mean age of 16.6 years (range 13 to 20 years). Twenty-one of the subjects were orthodontically treated with extraction of the 4 first permanent molars, and 20 had nonextraction treatment. The angulational changes and eruption spaces of third molars were evaluated on the panoramic radiographs taken before treatment and at the end of the observation period. Analysis of the linear variables demonstrated a statistically significant difference between the 2 groups for all third molar eruption spaces (P < .001). The mean differences in the third molar eruption spaces between the pretreatment and posttreatment values for the first molar extraction group were higher than those of the nonextraction cases. Orthodontic treatment accomplished with extractions of the permanent first molars increases the eruption spaces of third molars and decreases their impaction. In addition, it has greater favorable effect on the angulation of the upper third molars than of the lower third molars.

Impacted Lower Second Permanent Molars at the Ramus and Coronoid Process: A New Clinical Symptom of the WNT10A Mutation in Ectodermal Dysplasia.

PubMed

Sfeir, Elia; Aboujaoude, Samia

2017-01-01

Hidrotic ectodermal dysplasia (ED) with the WNT10A mutation produces variable dentofacial symptoms. The aim of this study was to describe a new clinical symptom, i.e., specific to the WNT10A mutation in hidrotic ED. The study investigated the migratory trend of the lower second permanent molars to the ramus or coronoid process. To the best of authors' knowledge, no data in the literature describe this trend in cases of hidrotic ED. A three-generation family pedigree was established for seven families after the diagnosis of hidrotic ED in a 10-year-old boy. Thereafter, a genetic and clinical study was conducted on three families with at least one individual affected by hidrotic ED (20 individuals). We selected the children with molar germs 37 and 47. The eruption axes of these germs were then traced on the panoramic images at the initial time (T 0 ) and 1 year later (T 0 + 1 year), and the deviations between these axes were measured. A significant familial consanguinity was shown. Eight subjects presented with the hidrotic ED phenotype. Among them, three individuals carried germs 37 and 47. Over time, the measured deviations between the eruption axes of the latter displayed, in the majority of the cases, a distal inclination toward the ramus. A larger sample size is mandatory to assess the frequencies and treatment modalities. The presence of germs in the lower second permanent molars in patients with hidrotic ED is an important clinical symptom that should be monitored to detect and prevent ectopic migration of these teeth. In hidrotic ED cases, the study of the presence of the second lower permanent germs must include clinical and radiological examinations. Establishing an inter-ceptive treatment is necessary to prevent the migration of the molars in question. How to cite this article: Sfeir E, Aboujaoude S. Impacted Lower Second Permanent Molars at the Ramus and Coronoid Process: A New Clinical Symptom of the WNT10A Mutation in Ectodermal Dysplasia. Int J Clin Pediatr Dent 2017;10(4):363-368.

Class III correction using an inter-arch spring-loaded module

PubMed Central

2014-01-01

Background A retrospective study was conducted to determine the cephalometric changes in a group of Class III patients treated with the inter-arch spring-loaded module (CS2000®, Dynaflex, St. Ann, MO, USA). Methods Thirty Caucasian patients (15 males, 15 females) with an average pre-treatment age of 9.6 years were treated consecutively with this appliance and compared with a control group of subjects from the Bolton-Brush Study who were matched in age, gender, and craniofacial morphology to the treatment group. Lateral cephalograms were taken before treatment and after removal of the CS2000® appliance. The treatment effects of the CS2000® appliance were calculated by subtracting the changes due to growth (control group) from the treatment changes. Results All patients were improved to a Class I dental arch relationship with a positive overjet. Significant sagittal, vertical, and angular changes were found between the pre- and post-treatment radiographs. With an average treatment time of 1.3 years, the maxillary base moved forward by 0.8 mm, while the mandibular base moved backward by 2.8 mm together with improvements in the ANB and Wits measurements. The maxillary incisor moved forward by 1.3 mm and the mandibular incisor moved forward by 1.0 mm. The maxillary molar moved forward by 1.0 mm while the mandibular molar moved backward by 0.6 mm. The average overjet correction was 3.9 mm and 92% of the correction was due to skeletal contribution and 8% was due to dental contribution. The average molar correction was 5.2 mm and 69% of the correction was due to skeletal contribution and 31% was due to dental contribution. Conclusions Mild to moderate Class III malocclusion can be corrected using the inter-arch spring-loaded appliance with minimal patient compliance. The overjet correction was contributed by forward movement of the maxilla, backward and downward movement of the mandible, and proclination of the maxillary incisors. The molar relationship was corrected by mesialization of the maxillary molars, distalization of the mandibular molars together with a rotation of the occlusal plane. PMID:24934153

Efficacy of Codeine When Added to Paracetamol (Acetaminophen) and Ibuprofen for Relief of Postoperative Pain After Surgical Removal of Impacted Third Molars: A Double-Blinded Randomized Control Trial.

PubMed

Best, Adrian D; De Silva, R K; Thomson, W M; Tong, Darryl C; Cameron, Claire M; De Silva, Harsha L

2017-10-01

The use of opioids in combination with nonopioids is common practice for acute pain management after third molar surgery. One such combination is paracetamol, ibuprofen, and codeine. The authors assessed the efficacy of codeine when added to a regimen of paracetamol and ibuprofen for pain relief after third molar surgery. This study was a randomized, double-blinded, placebo-controlled trial conducted in patients undergoing the surgical removal of at least 1 impacted mandibular third molar requiring bone removal. Participants were randomly allocated to a control group (paracetamol 1,000 mg and ibuprofen 400 mg) or an intervention group (paracetamol 1,000 mg, ibuprofen 400 mg, and codeine 60 mg). All participants were treated under intravenous sedation and using identical surgical conditions and technique. Postoperative pain was assessed using the visual analog scale (VAS) every 3 hours (while awake) for the first 48 hours after surgery. Pain was globally assessed using a questionnaire on day 3 after surgery. There were 131 participants (36% men; control group, n = 67; intervention group, n = 64). Baseline characteristics were similar for the 2 groups. Data were analyzed using a modified intention-to-treat analysis and, for this, a linear mixed model was used. The model showed that the baseline VAS score was associated with subsequent VAS scores and that, with each 3-hour period, the VAS score increased by an average of 0.08. The treatment effect was not statistically meaningful, indicating there was no difference in recorded pain levels between the 2 groups during the first 48 hours after mandibular third molar surgery. Similarly, the 2 groups did not differ in their global ratings of postoperative pain. Codeine 60 mg added to a regimen of paracetamol 1,000 mg and ibuprofen 400 mg does not improve analgesia after third molar surgery. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Cesium Eluate Physical Property Determination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baich, M.A.

2001-02-13

Two bench-scale process simulations of the proposed cesium eluate evaporation process of concentrating eluate produced in the Hanford Site Waste Treatment Plant were conducted. The primary objective of these experiments was to determine the physical properties and the saturation concentration of the eluate evaporator bottoms while producing condensate approximately 0.50 molar HN03.

Physicochemical properties of betaine monohydrate-carboxylic acid mixtures

NASA Astrophysics Data System (ADS)

Zahrina, I.; Nasikin, M.; Mulia, K.

2018-05-01

Green solvents are widely used to minimize environmental problems associated with the use of volatile organic solvents in many industries. DES are new green solvents in recent. The physicochemical properties of DES can be varied by properly combining of salts with different hydrogen bond donors. The objective of this work is to investigate the effect of varying molar ratios on the physicochemical properties of betaine monohydrate-carboxylic acid (i.e,. propionic or acetic acid) mixtures. Properties of mixtures were measured at 40°C. The viscosity, polarity scale (ENR), density, pH, and water content tend to decrease with the decrease in a molar ratio of betaine monohydrate to acid. Conversely, the ionic conductivity was increased. The physicochemical properties of these mixtures depend on the hydrogen bonding interactions between betaine, water and acid molecules. Betaine monohydratecarboxylic acid mixtures have wide range of polarity, low viscosity, high ionic conductivity, and density higher than 1 g·cm-3 that make them fit for numerous various applications. Additionally, due to these mixtures have acidic pH, it should be properly selected of metal type to minimize corrosion problems in industrial application.

Treatment modalities in children with teeth affected by molar-incisor enamel hypomineralisation (MIH): A systematic review.

PubMed

Lygidakis, N A

2010-04-01

This was to review the literature concerning the treatment of permanent teeth with molar-incisor hypomineralised enamel (MIH), comment about possible shortcomings and propose areas of future research. A search of MedLine, Scopus, ResearchGate, Isis and Google Scholar databases was conducted using all terms relevant to the subject. Relevant papers published in English were identified after a review of their titles, abstracts or full reading of the papers. Of 189 references initially found, 66 papers were included; 34 directly relevant to the subject. From the latter, only 14 concerned laboratory or clinical studies dealing with treatment for MIH. Since 2000 11 reviews evaluated, to a certain extent, treatment options for affected teeth. Analysis of the proposed treatment modalities indicated options for prevention, restorations, and adhesion to hypomineralised enamel, full coronal coverage and extraction followed by orthodontics. Based on these findings, a treatment decision plan is proposed. Although treatment approaches for MIH have started to be clearer, long-term clinical trials, supported by laboratory studies, should be conducted to further facilitate the clinical management of this dental defect.

Pattern of mandibular third molar impaction and its association to caries in mandibular second molar: A clinical variant.

PubMed

Prajapati, V K; Mitra, Ruchi; Vinayak, K M

2017-01-01

Caries in second molar is common and prophylactic removal of the impacted teeth may be considered appropriate. Caries detection and restoration can be difficult and a restored second molar can undergo recurrent caries if the third molar is not removed prophylactically. In this study, the clinical findings related to impaction and its association with angular position and depth of impacted third molar were evaluated. A retrospective descriptive study was carried out among the patients visiting the outpatient, department of Dentistry, RIMS, Ranchi. The clinical examination, periapical radiographs and Pre-op OPG were taken. Teeth positions were analyzed by Pell and Gregory and Winter classification. The angulation and depth of mandibular third molar impaction and caries in the second molar with the eruption status of the mandibular third molar was determined. A total of 200 patients were included in the study between age group 17-45 years. Majority of the Patients reported to the hospital with complaints of decayed tooth (66%) and pain (59%). The most common third molar impaction was mesioangular followed by distoangular. A statistically highly significant difference ( P = 0.001) was obtained with the presence of caries in second molar adjacent to mesioangular third molar in class I and level B. According to this study, pattern of mandibular third molar impaction is in association to caries in mandibular second molar. More future studies are needed. In addition, the results of the present study can be used to screen and inform the patients about the possibility of caries in relation to third molar mandibular impaction.

Use of cone-beam computed tomography to evaluate root and canal morphology of mandibular first and second molars in Turkish individuals

PubMed Central

Sekerci, Ahmet E.; Dinçer, Asiye N.; Cayabatmaz, Muhammed; Zorba, Yahya O.

2013-01-01

Objective: The aim of this study was to investigate the root and canal morphology of mandibular first and second molars in a Turkish population by using cone beam computed tomography (CBCT). Study design: CBCT images of mandibular first (n = 823) and second molar (n = 925) teeth from 605 Turkish patients were analyzed. The root canal configurations were classified according to the method of Vertucci. Results: The majority of mandibular molars (95.8% of first molars, 85.4% of second molars) had two separate roots; however, three roots were identified in 2.06% of first molars and 3.45% of second molars. C-shaped canals occurred 0.85% of first molars and 4.1% of second molars. Three canals were found in 79.9% of first molars and 72.8% of second molars. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal. The most common root morphology of first and second molars is the two rooted morphology with three canals. Both the mesial and distal roots showed wide variations in canal anatomy with type IV and type I canal configuration predominating in the mesial and distal roots, respectively. Conclusion: Vertucci type I and IV canal configurations were the most prevalent in the distal and mesial roots, respectively, of both the mandibular first and second permanent molar teeth. Key words:Cone-beam CT, Turkish, mandibular molars, root and canal morphology. PMID:23524421

Utilization of acetone-butanol-ethanol-water mixture obtained from biomass fermentation as renewable feedstock for hydrogen production via steam reforming: Thermodynamic and energy analyses.

PubMed

Kumar, Brajesh; Kumar, Shashi; Sinha, Shishir; Kumar, Surendra

2018-08-01

A thermodynamic equilibrium analysis on steam reforming process to utilize acetone-butanol-ethanol-water mixture obtained from biomass fermentation as biorenewable fuel has been performed to produce clean energy carrier H 2 via non-stoichiometric approach namely Gibbs free energy minimization method. The effect of process variables such as temperature (573-1473 K), pressure (1-10 atm), and steam/fuel molar feed ratio (F ABE  = 5.5-12) have been investigated on equilibrium compositions of products, H 2 , CO, CO 2 , CH 4 and solid carbon. The best suitable conditions for maximization of desired product H 2 , suppression of CH 4 , and inhibition of solid carbon are 973 K, 1 atm, steam/fuel molar feed ratio = 12. Under these conditions, the maximum molar production of hydrogen is 8.35 with negligible formation of carbon and methane. Furthermore, the energy requirement per mol of H 2 (48.96 kJ), thermal efficiency (69.13%), exergy efficiency (55.09%), exergy destruction (85.36 kJ/mol), and generated entropy (0.29 kJ/mol.K) have been achieved at same operating conditions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Apical extrusion of debris in primary molar root canals using mechanical and manual systems.

PubMed

Buldur, B; Hascizmeci, C; Aksoy, S; Nur Aydin, M; Guvendi, O N

2018-03-01

Apical extrusion of debris in primary root canal treatment has not been well elucidated. The purpose of this study is to compare the amount of apically extruded debris during the preparation of primary molar root canals using ProTaper, ProTaper Next, Self-adjusting File (SAF) and hand files. One hundred sixty extracted primary mandibular molar teeth were assigned to 2 groups: Group 1: Resorbed (n=80) and Group 2: Non-resorbed (n=80) and randomly to four subgroups (n=20 teeth for each subgroup) according to the instruments used, ProTaper, ProTaper Next, SAF, and hand file. The apically extruded debris was collected and dried in preweighed Eppendof tubes. The dry weight was calculated by subtracting the preoperative weight from the postoperative weight. Data were analysed statistically using the ANOVA and the Bonferroni post hoc t-test. The amount of apically extruded debris was significantly less for the non-resorbed group compared to the resorbed group (P<0.05). Regardless of the resorption groups, ProTaper Next and SAF extruded significantly less debris than did the ProTaper and hand files (P<0.05), while no statistically significant difference was found between ProTaper Next and SAF (P>0.05). All instruments caused apically extruded debris in primary teeth.

Masticatory biomechanics in the rabbit: a multi-body dynamics analysis.

PubMed

Watson, Peter J; Gröning, Flora; Curtis, Neil; Fitton, Laura C; Herrel, Anthony; McCormack, Steven W; Fagan, Michael J

2014-10-06

Multi-body dynamics is a powerful engineering tool which is becoming increasingly popular for the simulation and analysis of skull biomechanics. This paper presents the first application of multi-body dynamics to analyse the biomechanics of the rabbit skull. A model has been constructed through the combination of manual dissection and three-dimensional imaging techniques (magnetic resonance imaging and micro-computed tomography). Individual muscles are represented with multiple layers, thus more accurately modelling muscle fibres with complex lines of action. Model validity was sought through comparing experimentally measured maximum incisor bite forces with those predicted by the model. Simulations of molar biting highlighted the ability of the masticatory system to alter recruitment of two muscle groups, in order to generate shearing or crushing movements. Molar shearing is capable of processing a food bolus in all three orthogonal directions, whereas molar crushing and incisor biting are predominately directed vertically. Simulations also show that the masticatory system is adapted to process foods through several cycles with low muscle activations, presumably in order to prevent rapidly fatiguing fast fibres during repeated chewing cycles. Our study demonstrates the usefulness of a validated multi-body dynamics model for investigating feeding biomechanics in the rabbit, and shows the potential for complementing and eventually reducing in vivo experiments.

Infant breast-feeding and childhood caries: a nine-year study.

PubMed

Hong, Liang; Levy, Steven M; Warren, John J; Broffitt, Barbara

2014-01-01

This study's purpose was to assess the association between infant breast-feeding and caries experience of primary second molars in a nine-year longitudinal cohort study. Study sample was 509 subjects recruited at birth. Information about breast-feeding duration and other factors was collected through parents' responses to periodic questionnaires. Primary teeth were examined for dental caries at five years old and nine years old by calibrated dentist examiners. Caries experience (yes/no) and number of decayed and/or filled surfaces (dfs) were determined for five- and nine-year-olds. For primary second molars at five years old, 18 percent of children who were breast-fed less than six months had caries (mean dfs=0.55) while only 9 percent of children who were breast-fed at least six months had caries (mean dfs=0.33). From five to nine years old, caries incidence was 32 percent and 31 percent, respectively, for children breast-fed less than six months and at least six months. In multivariable regression analyses, shorter breast-feeding duration was positively associated with caries experience of primary second molars at five years old (P=.005), both before and after controlling for other important factors. Shorter duration of breast-feeding is suggested to be associated with increased risk for early childhood caries, but its impact might diminish with age.

Masticatory biomechanics in the rabbit: a multi-body dynamics analysis

PubMed Central

Watson, Peter J.; Gröning, Flora; Curtis, Neil; Fitton, Laura C.; Herrel, Anthony; McCormack, Steven W.; Fagan, Michael J.

2014-01-01

Multi-body dynamics is a powerful engineering tool which is becoming increasingly popular for the simulation and analysis of skull biomechanics. This paper presents the first application of multi-body dynamics to analyse the biomechanics of the rabbit skull. A model has been constructed through the combination of manual dissection and three-dimensional imaging techniques (magnetic resonance imaging and micro-computed tomography). Individual muscles are represented with multiple layers, thus more accurately modelling muscle fibres with complex lines of action. Model validity was sought through comparing experimentally measured maximum incisor bite forces with those predicted by the model. Simulations of molar biting highlighted the ability of the masticatory system to alter recruitment of two muscle groups, in order to generate shearing or crushing movements. Molar shearing is capable of processing a food bolus in all three orthogonal directions, whereas molar crushing and incisor biting are predominately directed vertically. Simulations also show that the masticatory system is adapted to process foods through several cycles with low muscle activations, presumably in order to prevent rapidly fatiguing fast fibres during repeated chewing cycles. Our study demonstrates the usefulness of a validated multi-body dynamics model for investigating feeding biomechanics in the rabbit, and shows the potential for complementing and eventually reducing in vivo experiments. PMID:25121650

Topographic relationship between root apex of mesially and horizontally impacted mandibular third molar and lingual plate: cross-sectional analysis using CBCT

PubMed Central

Wang, Dongmiao; He, Xiaotong; Wang, Yanling; Zhou, Guangchao; Sun, Chao; Yang, Lianfeng; Bai, Jianling; Gao, Jun; Wu, Yunong; Cheng, Jie

2016-01-01

The present study was aimed to determine the topographic relationship between root apex of the mesially and horizontally impacted mandibular third molar and lingual plate of mandible. The original cone beam computed tomography (CBCT) data of 364 teeth from 223 patients were retrospectively collected and analyzed. The topographic relationship between root apex and lingual plate on cross-sectional CBCT images was classified as non-contact (99), contact (145) and perforation (120). The cross-sectional morphology of lingual plate at the level of root apex was defined as parallel (28), undercut (38), slanted (29) and round (4). The distribution of topographic relationship between root apex and lingual plate significantly associated with gender, impaction depth, root number and lingual plate morphology. Moreover, the average bone thickness of lingual cortex and distance between root apex and the outer surface of lingual plate were 1.02 and 1.39 mm, respectively. Furthermore, multivariate regression analyses identified impaction depth and lingual plate morphology as the risk factors for the contact and perforation subtypes between root apex and lingual plate. Collectively, our findings reveal the topographic proximity of root apex of impacted mandibular third molar to the lingual plate, which might be associated with intraoperative and postoperative complications during tooth extraction. PMID:27991572

Low-Temperature Heat Capacities and Standard Molar Enthalpy of Formation of Potassium Benzoate C7H5O2K(s)

NASA Astrophysics Data System (ADS)

Yang, Wei-Wei; di, You-Ying; Yin, Zhen-Fen; Kong, Yu-Xia; Tan, Zhi-Cheng

2009-04-01

Potassium benzoate C7H5O2K (CAS Registry No. 582-25-2) was synthesized by the method of liquid phase reaction. Chemical and elemental analyses, FTIR, and X-ray powder diffraction (XRD) techniques were applied to characterize the composition and structure of the compound. Low-temperature heat capacities of the compound were measured by a precision automated adiabatic calorimeter over the temperature range from 78 K to 398 K. A polynomial equation of the heat capacities as a function of temperature was fitted by the least-squares method. Smoothed heat capacities and thermodynamic functions of the compound were calculated based on the fitted polynomial. In accordance with Hess’s law, a reasonable thermochemical cycle was designed, and 100 mL of 1 mol · dm-3 NaOH solution was chosen as the calorimetric solvent. The standard molar enthalpies of dissolution for the reactants and products of the supposed reaction in the selected solvent were measured by an isoperibol solution-reaction calorimeter. Finally, the standard molar enthalpy of formation of the title compound C7H5O2K (s) was derived to be -(610.94 ± 0.77) kJ · mol-1.

Prevalence of infraocclusion of primary molars determined using a new 2D image analysis methodology.

PubMed

Odeh, R; Mihailidis, S; Townsend, G; Lähdesmäki, R; Hughes, T; Brook, A

2016-06-01

The reported prevalence of infraocclusion varies widely, reflecting differences in definitions and measurement/scoring approaches. This study aimed to quantify the prevalence and extent of infraocclusion in singletons and twins during the late mixed dentition stage of dental development using a new diagnostic imaging method and objective criteria. The study also aimed to determine any associations between infraocclusion and gender, arch type, arch side and tooth type. Two samples were analysed, 1454 panoramic radiographs of singletons and 270 dental models of twins. Both samples ranged in age from 8 to 11 years. Adobe Photoshop CS5 was used to measure the extent of infraocclusion. Repeatability tests showed systematic and random errors were small. The prevalence in the maxilla was low (<1%), whereas the prevalence in the mandible was 22% in the singleton sample and 32% in the twin sample. The primary mandibular first molar was affected more often than the second molar. There was no significant difference in the expression between genders or sides. A new technique for measuring infraocclusion has been developed with high intra- and interoperator reproducibility. This method should enhance early diagnosis of tooth developmental abnormalities and treatment planning during the late mixed dentition stage of development. © 2016 Australian Dental Association.

New evidence for mammaliaform ear evolution and feeding adaptation in a Jurassic ecosystem

NASA Astrophysics Data System (ADS)

Luo, Zhe-Xi; Meng, Qing-Jin; Grossnickle, David M.; Liu, Di; Neander, April I.; Zhang, Yu-Guang; Ji, Qiang

2017-08-01

Stem mammaliaforms are forerunners to modern mammals, and they achieved considerable ecomorphological diversity in their own right. Recent discoveries suggest that eleutherodontids, a subclade of Haramiyida, were more species-rich during the Jurassic period in Asia than previously recognized. Here we report a new Jurassic eleutherodontid mammaliaform with an unusual mosaic of highly specialized characteristics, and the results of phylogenetic analyses that support the hypothesis that haramiyidans are stem mammaliaforms. The new fossil shows fossilized skin membranes that are interpreted to be for gliding and a mandibular middle ear with a unique character combination previously unknown in mammaliaforms. Incisor replacement is prolonged until well after molars are fully erupted, a timing pattern unique to most other mammaliaforms. In situ molar occlusion and a functional analysis reveal a new mode of dental occlusion: dual mortar-pestle occlusion of opposing upper and lower molars, probably for dual crushing and grinding. This suggests that eleutherodontids are herbivorous, and probably specialized for granivory or feeding on soft plant tissues. The inferred dietary adaptation of eleutherodontid gliders represents a remarkable evolutionary convergence with herbivorous gliders in Theria. These Jurassic fossils represent volant, herbivorous stem mammaliaforms associated with pre-angiosperm plants that appear long before the later, iterative associations between angiosperm plants and volant herbivores in various therian clades.

New evidence for mammaliaform ear evolution and feeding adaptation in a Jurassic ecosystem.

PubMed

Luo, Zhe-Xi; Meng, Qing-Jin; Grossnickle, David M; Liu, Di; Neander, April I; Zhang, Yu-Guang; Ji, Qiang

2017-08-17

Stem mammaliaforms are forerunners to modern mammals, and they achieved considerable ecomorphological diversity in their own right. Recent discoveries suggest that eleutherodontids, a subclade of Haramiyida, were more species-rich during the Jurassic period in Asia than previously recognized. Here we report a new Jurassic eleutherodontid mammaliaform with an unusual mosaic of highly specialized characteristics, and the results of phylogenetic analyses that support the hypothesis that haramiyidans are stem mammaliaforms. The new fossil shows fossilized skin membranes that are interpreted to be for gliding and a mandibular middle ear with a unique character combination previously unknown in mammaliaforms. Incisor replacement is prolonged until well after molars are fully erupted, a timing pattern unique to most other mammaliaforms. In situ molar occlusion and a functional analysis reveal a new mode of dental occlusion: dual mortar-pestle occlusion of opposing upper and lower molars, probably for dual crushing and grinding. This suggests that eleutherodontids are herbivorous, and probably specialized for granivory or feeding on soft plant tissues. The inferred dietary adaptation of eleutherodontid gliders represents a remarkable evolutionary convergence with herbivorous gliders in Theria. These Jurassic fossils represent volant, herbivorous stem mammaliaforms associated with pre-angiosperm plants that appear long before the later, iterative associations between angiosperm plants and volant herbivores in various therian clades.

Ligational behavior of clioquinol antifungal drug towards Ag(I), Hg(II), Cr(III) and Fe(III) metal ions: Synthesis, spectroscopic, thermal, morphological and antimicrobial studies

NASA Astrophysics Data System (ADS)

El-Megharbel, Samy M.; Refat, Moamen S.

2015-04-01

This article presents a synthesis, characterization, theoretical and biological (anti-bacterial, and anti-fugal) evaluation studies of Ag(I), Hg(II), Cr(III) and Fe(III) complexes of clioquinol (CQ) drug ligand. Structures of the titled complexes cited herein were discussed using elemental analyses and spectral measurements e.g., IR, 1H NMR, and electronic studies. The results confirmed the formation of the clioquinol complexes by three molar ratios (1:1) for Ag(I), (1:2) for Hg(II) and (1:3) for both Cr(III) and Fe(III) metal ions. The clioquinol reacts as a bidentate chelate bound to all respected metal ions through the oxygen and nitrogen of quinoline-8-ol. The metal(II) ions coordinated to clioquinol ligand through deprotonation of sbnd OH terminal group. Infrared and 1H NMR spectral data confirm that coordination is via the oxygen of phenolic group and nitrogen atom of quinoline moiety. The molar conductance measurements of the CQ complexes in DMSO correspond to be non-electrolyte nature. Thus, these complexes may be formulated as [Ag(CQ)(H2O)2] H2O, [Hg(CQ)2]ṡ2H2O, [Cr(CQ)3] and [Fe(CQ)3]H2O. The Coats-Redfern method, the kinetic thermodynamic parameters like activation energies (E∗), entropies (ΔS∗), enthalpies (ΔH∗), and Gibbs free energies (ΔG∗) of the thermal decomposition reactions have been deduced from thermogravimetric curves (TG) with helpful of differential thermo gravimetric (DTG) curves. The narrow size distribution in nano-scale range for the clioquinol complexes have been discussed using X-ray powder diffraction (XRD), scanning electron microscope (SEM), and X-ray energy dispersive spectrometer (EDX) analyzer.

A revision of hominin fossil teeth from Fontana Ranuccio (Middle Pleistocene, Anagni, Frosinone, Italy).

PubMed

Rubini, Mauro; Cerroni, Vittorio; Festa, Giulia; Sardella, Raffaele; Zaio, Paola

2014-12-01

The Fontana Ranuccio hominin teeth (FR, Latium, Italy) are dated to the Middle Pleistocene. In previous studies these teeth were classified as two lower (left and right) second molars, one lower left central incisor and a badly worn incisor crown, the exact position of which could not be determined. In 2012 these remains were acquired by the Anthropological Service of S.B.A.L. (Italian Ministry of Culture) and for this reason re-analysed. In a thorough revision we have reassessed them both morphologically and dimensionally as two lower (left and right) first molars, one lower left lateral incisor and a possible upper left canine. The comparison with penecontemporaneous and diachronic samples shows that the Fontana Ranuccio teeth are morphologically similar to Atapuerca-Sima de los Huesos, Arago XIII and Neanderthal samples. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rigid endosseous implant utilized as anchorage to protract molars and close an atrophic extraction site.

PubMed

Roberts, W E; Marshall, K J; Mozsary, P G

1990-01-01

A two-stage endosseous implant, placed in the retromolar area of the mandible was utilized as rigid anchorage to translate two molars 10-12 millimeters mesially into an atrophic endentulous ridge. Despite substantial anchorage demand over a three year period, the endosseous implant remained rigid ("osseointegrated"). At the end of treatment the implant and adjacent, intravitally labeled bone were recovered. Microradiographic and polarized light analyses revealed that about 80 percent of the endosseous portion of the implant was in direct contact with mature lamellar bone. Bone labels demonstrated a remarkably high remodeling rate (about 30 percent/year) for cortical bone within 0.5 millimeter of the interface. Continuous remodeling may be the long-term mechanism whereby loaded implants resist bone fatigue and maintain "osseointegration." Clinical use of orthodontic implants, placed outside the dental arches, requires careful attention to soft tissue management.

Spectroscopic, cyclic voltammetric and biological studies of transition metal complexes with mixed nitrogen-sulphur (NS) donor macrocyclic ligand derived from thiosemicarbazide

NASA Astrophysics Data System (ADS)

Chandra, Sulekh; Gupta, Lokesh Kumar; Sangeetika

2005-11-01

The complexation of new mixed thia-aza-oxa macrocycle viz., 2,12-dithio-5,9,14,18-tetraoxo-7,16-dithia-1,3,4,10,11,13-hexaazacyclooctadecane containing thiosemicarba-zone unit with a series of transition metals Co(II), Ni(II) and Cu(II) has been investigated, by different spectroscopic techniques. The structural features of the ligand have been studied by EI-mass, 1H NMR and IR spectral techniques. Elemental analyses, magnetic moment susceptibility, molar conductance, IR, electronic, and EPR spectral studies characterized the complexes. Electronic absorption and IR spectra of the complexes indicate octahedral geometry for chloro, nitrato, thiocyanato or acetato complexes. The dimeric and neutral nature of the sulphato complexes are confirmed from magnetic susceptibility and low conductance values. Electronic spectra suggests square-planar geometry for all sulphato complexes. The redox behaviour was studied by cyclic voltammetry, show metal-centered reduction processes for all complexes. The complexes of copper show both oxidation and reduction process. The redox potentials depend on the conformation of central atom in the macrocyclic complexes. Newly synthesized macrocyclic ligand and its transition metal complexes show markedly growth inhibitory activity against pathogenic bacterias and plant pathogenic fungi under study. Most of the complexes have higher activity than that of the metal free ligand.

Polymeric material prepared from Schiff base based on O-carboxymethyl chitosan and its Cu(II) and Pd(II) complexes

NASA Astrophysics Data System (ADS)

Baran, Talat; Menteş, Ayfer

2016-07-01

In this study, a new eco-friendly Schiff base based on O-carboxymethyl chitosan ([OCMCS-7a]) and its copper(II) and palladium(II) complexes were synthesized. Characterizations of [OCMCS-7a] and its metal complexes were conducted using FTIR, 1H NMR, 13C NMR, TG/DTG, XRD, SEM-EDAX, ICP, UV-VIS, GC-MS, elemental analysis, magnetic moment and molar conductivity measurements. The degree of substitution (DS) of [OCMCS-7a] was determined by elemental analysis to be 0.44. It was shown by the solubility test that [OCMCS-7a] was completely soluble in water. Surface images of chitosan, [OCMCS-7a] and its Cu(II) and Pd(II) complexes were investigated using the SEM-EDAX technique. Their thermal behaviors and crystallinities of the synthesized complexes were determined by TG/DTG and X-ray powder diffraction techniques, respectively. The metal contents of the obtained complexes were determined using an ICP-OES instrument. From the analyses, it was noted that the thermal stabilities and crystallinities of [OCMCS-7a] and its complexes decreased compared to chitosan. As a consequence of surface screening, it was also noted that the surface structure of the chitosan was smoother than that of the obtained compounds.

Rapid Thermal Annealing for Solution Synthesis of Transparent Conducting Aluminum Zinc Oxide Thin Films

NASA Astrophysics Data System (ADS)

Ullah, Sana; De Matteis, Fabio; Davoli, Ivan

2017-11-01

Transparent conducting oxide films with optimized dopant molar ratio have been prepared with limited pre- and postdeposition annealing duration of 10 min. Multiple aluminum zinc oxide (AZO) layers were spin-coated on ordinary glass substrates. The predeposition consolidation temperature and dopant molar ratio were optimized for electrical conductivity and optical transparency. Next, a group of films were deposited on Corning glass substrates from precursor solutions with the optimized dopant ratio, followed by postdeposition rapid thermal annealing (RTA) at different temperatures and in controlled environments. The lowest resistivity of 10.1 × 10-3 Ω cm was obtained for films receiving RTA at 600°C for 10 min each in vacuum then in N2-5%H2 environment, while resistivity of 20.3 × 10-3 Ω cm was obtained for films subjected to RTA directly in N2-5%H2. Optical measurements revealed average total transmittance of about 85% in the visible region. A direct allowed transition bandgap was determined based on the absorption edge with a value slightly above 3.0 eV, within the typical range for semiconductors. RTA resulted in desorption of oxygen with enhanced carrier concentration and crystallinity, which increased the carrier mobility with decreased bulk resistivity while maintaining the required optical transparency.

Distal cervical caries in the mandibular second molar: an indication for the prophylactic removal of third molar teeth? Update.

PubMed

McArdle, Louis W; McDonald, Fraser; Jones, Judith

2014-02-01

In 2005 we reported the clinical findings of 100 patients who had mandibular third molars removed because of distal cervical caries in the mandibular second molar. The aim of this follow-up study was to find out whether the findings in a new group of patients corroborate those of our previous study. We report on the clinical features of 239 patients (mean (SD) age 32.1 (7.85) years, range 20-65) who had 288 mandibular third molars removed because of distal cervical caries in the second molar. Patients had better dental health than average, and 67% had a DMF (decayed, missing, or filled) score of 5 or less. In 89% of third molars the mesial angulation was between 40° and 80°. Distal cervical caries in second molars is a late complication of third molar retention. The prophylactic removal of a partially erupted mesioangular third molar will prevent distal cervical caries forming in the second molar tooth. Copyright © 2013 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Positional changes of the third molar in orthodontically treated patients.

PubMed

Mihai, A M; Lulache, I R; Grigore, R; Sanabil, A S; Boiangiu, S; Ionescu, E

2013-06-15

Over the years, the effects of the third molars eruption on the dental arches have been studied extensively. Still, literature provides less data regarding the effects of the orthodontic treatment on the third molars position. The aim of our study was to assess the positional changes of the third molars relative to the occlusal plane and to the second molar long axis, changes occurred during orthodontic treatment performed with or without premolar extractions. This study included 20 orthodontic treated patients: 10 of them with premolar extractions and 10 without premolar extractions. The pretreatment and post treatment panoramic radiographs were analyzed, and the angles between the third molar long axis and the occlusal plane and between the long axis of the third molar and the long axis of the second molar were measured. Changes in third molar position, from pretreatment to post treatment, for the two groups of patients were evaluated by using the Student's t-test. The results of the statistical analysis revealed an improvement in third molars position, the best results were seen in the lower third molars, in the group of patients treated with premolar extractions.

40 CFR Table 1 to Subpart Ja of... - Molar Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Molar Exhaust Volumes and Molar Heat... Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents Constituent MEVa dscf/mol MHCb Btu/mol... standard conditions of 68 °F and 1 atmosphere. b MHC = molar heat content (higher heating value basis), Btu...

40 CFR Table 1 to Subpart Ja of... - Molar Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Molar Exhaust Volumes and Molar Heat... Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents Constituent MEVa dscf/mol MHCb Btu/mol... standard conditions of 68 °F and 1 atmosphere. b MHC = molar heat content (higher heating value basis), Btu...

Relationship between mandibular condyle and angle fractures and the presence of mandibular third molars

PubMed Central

Mah, Deuk-Hyun; Moon, Seong-Yong; Oh, Ji-Su; You, Jae-Seek

2015-01-01

Objectives We retrospectively evaluated the impact of mandibular third molars on the occurrence of angle and condyle fractures. Materials and Methods This was a retrospective investigation using patient records and radiographs. The sample set consisted of 440 patients with mandibular fractures. Eruption space, depth and angulation of the third molar were measured. Results Of the 144 angle fracture patients, 130 patients had third molars and 14 patients did not. The ratio of angle fractures when a third molar was present (1.26 : 1) was greater than when no third molar was present (0.19 : 1; odds ratio, 6.58; P<0.001). Of the 141 condyle fractures patients, the third molar was present in 84 patients and absent in 57 patients. The ratio of condyle fractures when a third molar was present (0.56 : 1) was lower than when no third molar was present (1.90 : 1; odds ratio, 0.30; P<0.001). Conclusion The increased ratio of angle fractures with third molars and the ratio of condyle fractures without a third molar were statistically significant. The occurrence of angle and condyle fractures was more affected by the continuity of the cortical bone at the angle than by the depth of a third molar. These results demonstrate that a third molar can be a determining factor in angle and condyle fractures. PMID:25741462

Root and Root Canal Morphology of Human Third Molar Teeth.

PubMed

Mohammadi, Zahed; Jafarzadeh, Hamid; Shalavi, Sousan; Bandi, Shilpa; Patil, Shankargouda

2015-04-01

Successful root canal treatment depends on having comprehensive information regarding the root(s)/canal(s) anatomy. Dentists may have some complication in treatment of third molars because the difficulty in their access, their aberrant occlusal anatomy and different patterns of eruption. The aim of this review was to review and address the number of roots and root canals in third molars, prevalence of confluent canals in third molars, C-shaped canals, dilaceration and fusion in third molars, autotransplantation of third molars and endodontic treatment strategies for third molars.

Pattern of mandibular third molar impaction and its association to caries in mandibular second molar: A clinical variant

PubMed Central

Prajapati, V. K.; Mitra, Ruchi; Vinayak, K. M.

2017-01-01

Background: Caries in second molar is common and prophylactic removal of the impacted teeth may be considered appropriate. Caries detection and restoration can be difficult and a restored second molar can undergo recurrent caries if the third molar is not removed prophylactically. In this study, the clinical findings related to impaction and its association with angular position and depth of impacted third molar were evaluated. Materials and Methods: A retrospective descriptive study was carried out among the patients visiting the outpatient, department of Dentistry, RIMS, Ranchi. The clinical examination, periapical radiographs and Pre-op OPG were taken. Teeth positions were analyzed by Pell and Gregory and Winter classification. The angulation and depth of mandibular third molar impaction and caries in the second molar with the eruption status of the mandibular third molar was determined. Results: A total of 200 patients were included in the study between age group 17-45 years. Majority of the Patients reported to the hospital with complaints of decayed tooth (66%) and pain (59%). The most common third molar impaction was mesioangular followed by distoangular. A statistically highly significant difference (P = 0.001) was obtained with the presence of caries in second molar adjacent to mesioangular third molar in class I and level B. Conclusion: According to this study, pattern of mandibular third molar impaction is in association to caries in mandibular second molar. More future studies are needed. In addition, the results of the present study can be used to screen and inform the patients about the possibility of caries in relation to third molar mandibular impaction. PMID:28584538

Effect of molar ratio of oxidizer/3-hexylthiophene monomer in chemical oxidative polymerization of poly(3-hexylthiophene)

NASA Astrophysics Data System (ADS)

Hai, Thien An Phung; Sugimoto, Ryuichi

2017-10-01

Poly(3-hexylthiophene) (P3HT) was successfully prepared by oxidative polymerization of 3-hexylthiophene (3HT) using FeCl3 in various solvents, including hexane, nitrobenzene, and acetonitrile. The range of molar ratios between the oxidant and monomer used in the reactions was 1:1-1:10. A similar result was obtained when the polymerization was conducted in ethanol-free chloroform, which indicated that the Lewis acidity of anhydrous FeCl3 was significantly affected by even a small amount of ethanol. The yield of P3HT obtained in the above solvents was proportional to the monomer/FeCl3 molar ratio, and the yield in hexane was the highest among all solvents. Analysis of the methanol extract of P3HT using Surface-Assisted Laser Desorption/Ionization Time-Of-Light Mass Spectrometry (SALDI TOF MS) showed that the 3HT dimer was formed at the initial stage of polymerization. The structure of the oligomer was also analyzed using SALDI TOF MS and 1H NMR. These results provide detailed insights into the polymerization mechanism of 3HT with FeCl3 as oxidant.

Cobalt-Mediated Radical Polymerization of Vinyl Acetate and Acrylonitrile in Supercritical Carbon Dioxide.

PubMed

Kermagoret, Anthony; Chau, Ngoc Do Quyen; Grignard, Bruno; Cordella, Daniela; Debuigne, Antoine; Jérôme, Christine; Detrembleur, Christophe

2016-03-01

Cobalt-mediated radical polymerization (CMRP) of vinyl acetate (VAc) is successfully achieved in supercritical carbon dioxide (scCO2). CMRP of VAc is conducted using an alkyl-cobalt(III) adduct that is soluble in scCO2. Kinetics studies coupled to visual observations of the polymerization medium highlight that the melt viscosity and PVAc molar mass (Mn) are key parameters that affect the CMRP in scCO2. It is noticed that CMRP is controlled for Mn up to 10 000 g mol(-1), but loss of control is progressively observed for higher molar masses when PVAc precipitates in the polymerization medium. Low molar mass PVAc macroinitiator, prepared by CMRP in scCO2, is then successfully used to initiate the acrylonitrile polymerization. PVAc-b-PAN block copolymer is collected as a free flowing powder at the end of the process although the dispersity of the copolymer increases with the reaction time. Although optimization is required to decrease the dispersity of the polymer formed, this CMRP process opens new perspectives for macromolecular engineering in scCO2 without the utilization of fluorinated comonomers or organic solvents. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fully transparent, non-volatile bipolar resistive memory based on flexible copolyimide films

NASA Astrophysics Data System (ADS)

Yu, Hwan-Chul; Kim, Moon Young; Hong, Minki; Nam, Kiyong; Choi, Ju-Young; Lee, Kwang-Hun; Baeck, Kyoung Koo; Kim, Kyoung-Kook; Cho, Soohaeng; Chung, Chan-Moon

2017-01-01

Partially aliphatic homopolyimides and copolyimides were prepared from rel-(1'R,3S,5'S)-spiro[furan-3(2H),6'-[3]oxabicyclo[3.2.1]octane]-2,2',4',5(4H)-tetrone (DAn), 2,6-diaminoanthracene (AnDA), and 4,4'-oxydianiline (ODA) by varying the molar ratio of AnDA and ODA. We utilized these polyimide films as the resistive switching layer in transparent memory devices. While WORM memory behavior was obtained with the PI-A100-O0-based device (molar feed ratio of DAn : AnDA : ODA = 1 : 1 : 0), the PI-A70-O30-based device (molar feed ratio of DAn : AnDA : ODA = 1 : 0.7 : 0.3) exhibited bipolar resistive switching behavior with stable retention for 104 s. This result implies that the memory properties can be controlled by changing the polyimide composition. The two devices prepared from PI-A100-O0 and PI-A70-O30 showed over 90% transmittance in the visible wavelength range from 400 to 800 nm. The behavior of the memory devices is considered to be governed by trap-controlled, space-charge limited conduction (SCLC) and local filament formation. [Figure not available: see fulltext.

Aging of monolithic zirconia dental prostheses: Protocol for a 5-year prospective clinical study using ex vivo analyses.

PubMed

Koenig, Vinciane; Wulfman, Claudine P; Derbanne, Mathieu A; Dupont, Nathalie M; Le Goff, Stéphane O; Tang, Mie-Leng; Seidel, Laurence; Dewael, Thibaut Y; Vanheusden, Alain J; Mainjot, Amélie K

2016-12-15

Recent introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) monolithic zirconia dental prostheses raises the issue of material low thermal degradation (LTD), a well-known problem with zirconia hip prostheses. This phenomenon could be accentuated by masticatory mechanical stress. Until now zirconia LTD process has only been studied in vitro . This work introduces an original protocol to evaluate LTD process of monolithic zirconia prostheses in the oral environment and to study their general clinical behavior, notably in terms of wear. 101 posterior monolithic zirconia tooth elements (molars and premolars) are included in a 5-year prospective clinical trial. On each element, several areas between 1 and 2 mm 2 (6 on molars, 4 on premolars) are determined on restoration surface: areas submitted or non-submitted to mastication mechanical stress, glazed or non-glazed. Before prosthesis placement, ex vivo analyses regarding LTD and wear are performed using Raman spectroscopy, SEM imagery and 3D laser profilometry. After placement, restorations are clinically evaluated following criteria of the World Dental Federation (FDI), complemented by the analysis of fracture clinical risk factors. Two independent examiners perform the evaluations. Clinical evaluation and ex vivo analyses are carried out after 6 months and then each year for up to 5 years. For clinicians and patients, the results of this trial will justify the use of monolithic zirconia restorations in dental practice. For researchers, the originality of a clinical study including ex vivo analyses of material aging will provide important data regarding zirconia properties.Trial registration: ClinicalTrials.gov Identifier: NCT02150226.

[Effects of the first premolar extraction on the third molar angulation].

PubMed

He, Yu-hong; Duan, Yin-zhong; Pan, Ji-jun; Xi, Lan-lan

2008-08-01

To analyze the effects about inclinations of the second and the third molars in patients treated with or without premolar extractions. Fifty-six adolescents were chosen and divided into the first premolar extraction and non-extraction groups, 30 and 26 patients respectively. The pre-treatment and post-treatment panoramic radiographs were made. Angles between long axis of the third molar and the occlusal plane (the second molar alike), and long axis of the second and the third molar were measured and evaluated. The maxillary and mandibular third molar angulations were all improved after treatment in two groups. Compared with non-extraction group, the average changes of angle between long axis of the third molar and the occlusal plane increased significantly in maxilla and mandible (P < 0.05). Average changes of angles between long axis of the second and the third molar decreased and had statistically significant difference (P < 0.05). The change of angle between long axis of mandibular second molar and the occlusal plane had statistically significant difference (P < 0.05), but there was no statistically significant difference in maxillary second molar (P > 0.05). The first premolar extraction in orthodontic treatment could improve the third molar angulations and it would promote the eruption of the third molar.

Synthesis, characterization and biological activity of some transition metals with Schiff base derived from 2-thiophene carboxaldehyde and aminobenzoic acid.

PubMed

Mohamed, Gehad G; Omar, M M; Hindy, Ahmed M M

2005-12-01

Metal complexes of Schiff base derived from 2-thiophene carboxaldehyde and 2-aminobenzoic acid (HL) are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance and thermal analysis (TGA). The ligand dissociation as well as the metal-ligand stability constants were calculated pH metrically at 25 degrees C and ionic strength mu=0.1 (1M NaCl). The complexes are found to have the formulae [M(HL)2](X)n.yH2O (where M=Fe(III) (X=Cl, n=3, y=3), Co(II) (X=Cl, n=2, y=1.5), Ni(II) (X=Cl, n=2, y=1) and UO2(II) (X=NO3, n=2, y=0)) and [M(L)2] (where M=Cu(II) (X=Cl) and Zn(II) (X=AcO)). The molar conductance data reveal that Fe(III) and Co(II), Ni(II) and UO2(II) chelates are ionic in nature and are of the type 3:1 and 2:1 electrolytes, respectively, while Cu(II) and Zn(II) complexes are non-electrolytes. IR spectra show that HL is coordinated to the metal ions in a terdentate manner with ONS donor sites of the carboxylate O, azomethine N and thiophene S. From the magnetic and solid reflectance spectra, it is found that the geometrical structure of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, DeltaH*, DeltaS* and DeltaG* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligands, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus pyogones and Fungi (Candida). The activity data show that the metal complexes to be more potent/antibacterial than the parent Schiff base ligand against one or more bacterial species.

Synthesis, characterization and biological activity of some transition metals with Schiff base derived from 2-thiophene carboxaldehyde and aminobenzoic acid

NASA Astrophysics Data System (ADS)

Mohamed, Gehad G.; Omar, M. M.; Hindy, Ahmed M. M.

2005-12-01

Metal complexes of Schiff base derived from 2-thiophene carboxaldehyde and 2-aminobenzoic acid (HL) are reported and characterized based on elemental analyses, IR, 1H NMR, solid reflectance, magnetic moment, molar conductance and thermal analysis (TGA). The ligand dissociation as well as the metal-ligand stability constants were calculated pH metrically at 25 °C and ionic strength μ = 0.1 (1 M NaCl). The complexes are found to have the formulae [M(HL) 2](X) n· yH 2O (where M = Fe(III) (X = Cl, n = 3, y = 3), Co(II) (X = Cl, n = 2, y = 1.5), Ni(II) (X = Cl, n = 2, y = 1) and UO 2(II) (X = NO 3, n = 2, y = 0)) and [M(L) 2] (where M = Cu(II) (X = Cl) and Zn(II) (X = AcO)). The molar conductance data reveal that Fe(III) and Co(II), Ni(II) and UO 2(II) chelates are ionic in nature and are of the type 3:1 and 2:1 electrolytes, respectively, while Cu(II) and Zn(II) complexes are non-electrolytes. IR spectra show that HL is coordinated to the metal ions in a terdentate manner with ONS donor sites of the carboxylate O, azomethine N and thiophene S. From the magnetic and solid reflectance spectra, it is found that the geometrical structure of these complexes are octahedral. The thermal behaviour of these chelates shows that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the anions and ligand molecules in the subsequent steps. The activation thermodynamic parameters, such as, E*, Δ H*, Δ S* and Δ G* are calculated from the DrTG curves using Coats-Redfern method. The synthesized ligands, in comparison to their metal complexes also were screened for their antibacterial activity against bacterial species, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus pyogones and Fungi (Candida). The activity data show that the metal complexes to be more potent/antibacterial than the parent Schiff base ligand against one or more bacterial species.

Risk of osteoradionecrosis after extraction of impacted third molars in irradiated head and neck cancer patients.

PubMed

Oh, Hee-Kyun; Chambers, Mark S; Garden, Adam S; Wong, Pei-Fong; Martin, Jack W

2004-02-01

This study was performed to compare the risk of osteoradionecrosis (ORN) in head and neck cancer patients in whom 1 or more impacted third molars were extracted before radiotherapy with patients whose impacted third molars were left intact. Eighty-one patients were selected from the medical records from 1989 to 1998. Patients had at least 1 impacted third molar and received radiotherapy for a head and neck cancer. These patients were divided into 2 groups on the basis of preirradiation extraction: group 1, patients who had impacted third molars extracted before radiotherapy (n = 55), and group 2, patients whose impacted third molars were left intact before radiotherapy (n = 38). In 12 patients of combined groups 1 and 2, at least 1 but not all of the impacted third molars were extracted before radiotherapy. Before radiotherapy, a total of 99 impacted third molars were extracted from the 55 patients in group 1 and a total of 55 impacted third molars were left intact in the 38 patients in group 2. After radiotherapy, a total of 7 impacted third molars were removed from 5 patients as treatment for infection (5 lower molars) or discomfort (2 upper molars). A total of 4 patients (2 from group 1 and 2 from group 2) developed ORN in the mandible. Of these 4 cases of ORN, 1 from group 1 appeared to be related to a dry socket that developed after preirradiation extraction of a lower impacted third molar, 1 from group 2 seemed to be related to infection of a lower impacted third molar after radiotherapy, and the remaining 2 cases appeared to be unrelated to an impacted third molar. Because few patients in this study developed ORN, the study failed to demonstrate whether preirradiation extraction versus retention of impacted third molars affects the risk for ORN.

Does Administration of Oral Versus Intravenous Antibiotics for Third Molar Removal Have an Effect on the Incidence of Alveolar Osteitis or Postoperative Surgical Site Infections?

PubMed

Reiland, Matthew D; Ettinger, Kyle S; Lohse, Christine M; Viozzi, Christopher F

2017-09-01

To compare the incidence of postoperative alveolar osteitis (AO) and surgical site infections (SSIs) in 2 separate cohorts of patients undergoing elective third molar removal: those who received postoperative oral (PO) antibiotics and those who received perioperative intravenous (IV) antibiotics. A retrospective cohort study of all patients 14 to 30 years old undergoing elective outpatient third molar removal under a single surgeon's service over a 12-year period was completed. Patients undergoing third molar removal during the first 72 months received postoperative PO antibiotics alone. Patients undergoing third molar removal during the second 72 months received perioperative IV antibiotics alone. The primary predictor variable for the study was the antibiotic regimen used at the time of third molar removal. The primary outcome variable was the postoperative development of AO or SSI. Covariates included age and gender. Univariable and multivariable regression models assessed for associations between the antibiotic regimen used and the presence of AO and SSI. The study sample consisted of 1,895 patients (1,020 patients receiving postoperative PO antibiotics and 875 patients receiving perioperative IV antibiotics). Of patients receiving postoperative PO antibiotics, 6.4% developed AO an average of 5.7 days after the procedure and 2.6% developed an SSI an average of 23.2 days after the procedure. Of patients receiving perioperative IV antibiotics, 5.5% developed AO an average of 6.2 days after the procedure and 3.3% developed an SSI an average of 18.2 days after the procedure. No statistically significant associations between the antibiotic regimen used and the presence of AO or SSI were identified in univariable (P = 0.42 for AO, P = 0.32 for SSI) or multivariable (P = 0.65 for AO, P = 0.26 for SSI) analyses. In the postoperative PO antibiotic cohort, older age (P < .001) and female gender (P < .001) were significantly associated with the development of AO, and female gender (P = .015) was significantly associated with the presence of an SSI. In the perioperative IV antibiotic cohort, female gender was significantly associated with the development of AO (P = .011), and younger age was significantly associated with the presence of an SSI (P = .011). The use of a postoperative PO versus a perioperative IV antibiotic regimen does not significantly alter the incidence of AO or SSI after elective third molar removal. If the surgeon chooses to use antibiotics in the setting of third molar surgery, then perioperative IV antibiotics are preferable over postoperative PO antibiotics because they obviate any issues with patient compliance and might be less costly. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Long-term treatment effects of the FR-2 appliance: a prospective evalution 7 years post-treatment

PubMed Central

Franchi, Lorenzo; Cevidanes, Lucia H. S.; Scanavini, Marco A.; McNamara, James A.

2014-01-01

AIM To examine the long-term effects induced by treatment with the function regulator (FR-2) appliance 7 years post-treatment compared with untreated class II subjects. SUBJECTS AND METHODS The FR-2 sample was collected prospectively and comprised 17 subjects (10 boys and 7 girls, mean age 10.8 years) who were treated with the FR-2 appliance for 1.7 years and re-evaluated 7.1 years after treatment. The step-by-step mandibular advancement was performed gradually (increments up to 3–4 mm), until a ‘super class I’ molar relationship was obtained. The control group consisted of 17 class II subjects (9 boys and 8 girls, mean age 11.3 years) with class II malocclusion, excessive overjet, and class II molar relationship, matched to the treated group as to ages at all times, gender distribution, and stages of skeletal maturity (evaluated by the cervical vertebral maturation method). The lateral cephalograms were analysed at T1 (initial), T2 (final), and T3 (7.1 years post-treatment). The compatibility between the groups and the comparisons of their changes at T1–T2, T2–T3, and T1–T3 intervals were examined by independent sample t-tests (P < 0.05). RESULTS FR-2 treatment provided a significant improvement in the maxillomandibular relationship due to an increase in mandibular length compared with controls, which remained stable over time. Also overjet, overbite, and molar relationship corrections demonstrated stability. Among dentoalveolar changes, only the increased mesial movement of the mandibular molars in the FR-2 group demonstrated stability. CONCLUSIONS Correction of class II malocclusion remained stable 7 years after FR-2 treatment mainly due to the stability of the skeletal changes. PMID:23736378

Neurosensoric disturbances after surgical removal of the mandibular third molar based on either panoramic imaging or cone beam CT scanning: A randomized controlled trial (RCT)

PubMed Central

Vaeth, Michael; Wenzel, Ann

2016-01-01

Objective: Pre-surgical CBCT has been suggested before removal of the mandibular third molar. Currently, the standard-of-care is two-dimensional (2D) panoramic imaging. The aim of this randomized controlled trial was to analyse possible differences in neurosensoric disturbances of the inferior alveolar nerve between patients undergoing either panoramic imaging or CBCT before surgical removal of the mandibular third molar. Furthermore, the aim was to perform a sensitivity analysis to assess the statistical significance of different assumptions related to sample size calculations. Methods: 230 patients were randomized to a scan group and a non-scan group. All patients were referred from practicing dentists in the Copenhagen area. Inclusion criteria were overlap of the root complex and the mandibular canal on a 2D radiographic image. Central allocation of the randomization code and double blind settings were established. The surgical removal was performed in a specialized surgical practice geographically and personally separated from the study practice. Registration of neurosensoric anomalies was performed with a Semmes–Weinstein test and a visual analogue scale questionnaire pre- and post-surgically. Results: In the scan group (n = 114), 21 episodes of neurosensoric disturbances were registered and in the non-scan group (n = 116), 13 episodes of neurosensoric disturbances were registered. There was no statistically significant difference between the two groups (p = 0.14). Performing a sensitivity analysis confirmed that CBCT was not superior to panoramic imaging in avoiding neurosensoric disturbances. Conclusions: The use of CBCT before removal of the mandibular third molar does not seem to reduce the number of neurosensoric disturbances. PMID:26648386

Impact of oral hygiene and socio-demographic factors on dental caries in a suburban population in Nigeria.

PubMed

Oyedele, T A; Fadeju, A D; Adeyemo, Y I; Nzomiwu, C L; Ladeji, A M

2018-05-14

This was to determine dental caries determinants in the study participants. This was a secondary data study extracted from primary data through a school-based study that recruited students from primary and secondary schools in a suburban population in Nigeria. The variables included age, gender, socio-economic status, oral hygiene status, type of parenting, birth rank, family size and presence of dental caries. The diagnosis of dental caries was based on the World Health Oral Health Survey recommendations while oral hygiene was determined using simplified-oral hygiene index (OHI-S). Data was analysed using STATA version 13, statistical significance was set at P < 0.05. The prevalence of dental caries for the study population was 12.2%, DMFT and dmft were 0.16 and 0.06 respectively. Children within age groups 11-13 and 14-16 years had reduced chances of having dental caries (P = 0.01; P = 0.01); children with fair oral hygiene and poor oral hygiene had increased odds of having dental caries (P ≤ 0.001; P ≤ 0.001), last child of the family also had increased odds of having dental caries while children from large family size had reduced odds of having dental caries. This study also showed that first permanent molars and second primary molars were mostly affected by dental caries but there was no significant difference between distribution of the maxillary or mandibular jaw or between right and left quadrants. Age, oral hygiene, birth rank and family size were the significant determinants of dental caries in the study population and the teeth mostly affected were first permanent molars and second primary molars.

Neurosensoric disturbances after surgical removal of the mandibular third molar based on either panoramic imaging or cone beam CT scanning: A randomized controlled trial (RCT).

PubMed

Petersen, Lars B; Vaeth, Michael; Wenzel, Ann

2016-01-01

Pre-surgical CBCT has been suggested before removal of the mandibular third molar. Currently, the standard-of-care is two-dimensional (2D) panoramic imaging. The aim of this randomized controlled trial was to analyse possible differences in neurosensoric disturbances of the inferior alveolar nerve between patients undergoing either panoramic imaging or CBCT before surgical removal of the mandibular third molar. Furthermore, the aim was to perform a sensitivity analysis to assess the statistical significance of different assumptions related to sample size calculations. 230 patients were randomized to a scan group and a non-scan group. All patients were referred from practicing dentists in the Copenhagen area. Inclusion criteria were overlap of the root complex and the mandibular canal on a 2D radiographic image. Central allocation of the randomization code and double blind settings were established. The surgical removal was performed in a specialized surgical practice geographically and personally separated from the study practice. Registration of neurosensoric anomalies was performed with a Semmes-Weinstein test and a visual analogue scale questionnaire pre- and post-surgically. In the scan group (n = 114), 21 episodes of neurosensoric disturbances were registered and in the non-scan group (n = 116), 13 episodes of neurosensoric disturbances were registered. There was no statistically significant difference between the two groups (p = 0.14). Performing a sensitivity analysis confirmed that CBCT was not superior to panoramic imaging in avoiding neurosensoric disturbances. The use of CBCT before removal of the mandibular third molar does not seem to reduce the number of neurosensoric disturbances.

Acute toxicity and antispasmodic activities of Achillea wilhelmsii C. Koch.

PubMed

Ali, Niaz; Shah, Syed Wadood Ali; Ahmed, Ghayour; Shah, Ismail; Shoaib, Mohammad; Junaid, Muhammad; Ali, Waqar

2014-03-01

Since Achillea wilhelmsii is used as antispasmodic in traditional medicine, we conducted our current work to investigate its rationale on scientific grounds. Acute toxicity studies of crude methanol extract of Achillea wilhelmsii (Aw. CMeOH) is also performed. Effect of Aw. CMeOH and its fractions were tested on isolated sections of rabbits' jejunum at test concentrations 0.01, 0.03, 1.0, 3.0, 5.0 and 10mg/ml. The test extracts, in similar concentrations, were also tested on KCl-induced contractions. Calcium chloride curves were constructed for those fractions which relaxed KCl induced contractions in the absence and presence of the test samples to investigate its possible mode of action through calcium channels. Aw. CMeOH tested positive for flavonoids, saponins, tannins, glycosides, terpenoids, sterols, phenols, carbohydrates and proteins. LD(50) for acute toxicity studies is 2707±12.6 mg/kg. Mean EC(50) values for Aw. CMeOH on spontaneous and KCl-induced contractions are 3.41±0.18 (2.56-3.8, n=6) and 0.68±0.05 (0.6-0.85, n=6) mg/ml, respectively. Respective EC(50) values for n-hexane fraction on spontaneous and KCl-induced contractions are 3.06±0.08 (2.8-3.3, n=6) and 1.68±0.8 (1.4-1.9, n=6) mg/ml, respectively. Corresponding EC(50) (mg/ml) values for chloroformic, ethylacetate and aqueous fractions of Achillea wilhelmsii on spontaneous rabbits' jejunum preparations are 4.8±0.2 (4.41-5.63, n=6), 5.07±0.15 (4.7-5.58, n=6) and 5.2±0.13 (4.91-5.64, n=4), respectively. Constructing calcium chloride curves, in the presence of 0.1 mg/ml of Aw. CMeOH, mean EC(50) value (log molar [Ca(++)]) is-1.98±0.03 (-1.89-2.05, n=6) vs. control EC(50) (log molar [Ca(++)])-2.41±0.02 (-2.32-2.44, n=6). Mean EC(50) value (log molar [Ca(++)]) for 0.3 mg/ml n-hexane fraction is-1.76±0.05 (-1.70 -1.93, n=6) vs. control EC(50) (log molar [Ca(++)]) value-2.18±0.07 (-2.0-2.46, n=6). While in the presence of chloroformic fraction (3 mg/ml), mean EC(50) (log molar [Ca(++)]) value is -2.4±0.1 (-2.78 -2.9, n=6) vs. control EC(50) (log molar [Ca(++)]) value-2.70±0.05 (-2.5-2.8, n=6). Mean EC(50) value (log molar [Ca(++)]) for ethyl acetate fraction (1 mg/ml) is-1.94±0.07 (-1.75-2.05, n=6) vs. control EC(50) (log molar [Ca(++)]) value-2.69±0.04 (-2.57-2.79, n=6). Mean EC(50) (log molar [Ca(++)]) value for residual aqueous fraction (3 mg/ml) is-1.8±0.3 (-1.71-1.84, n=6) vs. control EC(50) (log molar [Ca(++)]) -2.6±0.04 (-2.59-2.76, n=6). Whereas, the verapamil (0.1µM) EC(50) value (log molar [Ca(++)]) is-1.7±0.1 (-1.6-1.8, n=6) vs. control EC(50) value (log molar [Ca(++)])- 2.4±0.09 (-2.3-2.47, n=6). The present research work confirms that the intestinal relaxation effect of Achillea wilhelmsii is supporting its traditional use as antispasmodic. The plant species can be a source for calcium antagonist(s), which can preferably be isolated from n-hexane fraction.

Evidence-based clinical practice guideline for the use of pit-and-fissure sealants: A report of the American Dental Association and the American Academy of Pediatric Dentistry.

PubMed

Wright, John T; Crall, James J; Fontana, Margherita; Gillette, E Jane; Nový, Brian B; Dhar, Vineet; Donly, Kevin; Hewlett, Edmond R; Quinonez, Rocio B; Chaffin, Jeffrey; Crespin, Matt; Iafolla, Timothy; Siegal, Mark D; Tampi, Malavika P; Graham, Laurel; Estrich, Cameron; Carrasco-Labra, Alonso

2016-08-01

This article presents evidence-based clinical recommendations for the use of pit-and-fissure sealants on the occlusal surfaces of primary and permanent molars in children and adolescents. A guideline panel convened by the American Dental Association (ADA) Council on Scientific Affairs and the American Academy of Pediatric Dentistry conducted a systematic review and formulated recommendations to address clinical questions in relation to the efficacy, retention, and potential side effects of sealants to prevent dental caries; their efficacy compared with fluoride varnishes; and a head-to-head comparison of the different types of sealant material used to prevent caries on pits and fissures of occlusal surfaces. This is an update of the ADA 2008 recommendations on the use of pit-and-fissure sealants on the occlusal surfaces of primary and permanent molars. The authors conducted a systematic search in MEDLINE, Embase, Cochrane Central Register of Controlled Trials, and other sources to identify randomized controlled trials reporting on the effect of sealants (available on the US market) when applied to the occlusal surfaces of primary and permanent molars. The authors used the Grading of Recommendations Assessment, Development, and Evaluation approach to assess the quality of the evidence and to move from the evidence to the decisions. The guideline panel formulated 3 main recommendations. They concluded that sealants are effective in preventing and arresting pit-and-fissure occlusal carious lesions of primary and permanent molars in children and adolescents compared with the nonuse of sealants or use of fluoride varnishes. They also concluded that sealants could minimize the progression of noncavitated occlusal carious lesions (also referred to as initial lesions) that receive a sealant. Finally, based on the available limited evidence, the panel was unable to provide specific recommendations on the relative merits of 1 type of sealant material over the others. These recommendations are designed to inform practitioners during the clinical decision-making process in relation to the prevention of occlusal carious lesions in children and adolescents. Clinicians are encouraged to discuss the information in this guideline with patients or the parents of patients. The authors recommend that clinicians reorient their efforts toward increasing the use of sealants on the occlusal surfaces of primary and permanent molars in children and adolescents. Copyright © 2016 American Academy of Pediatric Dentistry and American Dental Association. Published by Elsevier Inc. All rights reserved.

Microscale determination of the spectral characteristics and carbon-isotopic compositions of porphyrins

NASA Technical Reports Server (NTRS)

Popp, B. N.; Hayes, J. M.; Boreham, C. J.

1993-01-01

Molar extinction coefficients for band III of Ni porphyrins are calculated from results of spectrophotometric and manometric analyses of individual etioporphyrins, DPEP, cyclic, and diDPEP porphyrins known to initially be pure from mass spectrometry, 1H NMR, and analytical HPLC studies. A method for determining carbon-isotopic compositions and purity of micromolar quantities of individual porphyrins using combined spectrophotometric and manometric techniques is presented.

Maxillary second molar impaction in the adjacent ectopic third molar: Report of five rare cases

PubMed Central

Souki, Bernardo Q.; Cheib, Paula L.; de Brito, Gabriela M.; Pinto, Larissa S. M. C.

2015-01-01

Maxillary second molar impaction in the adjacent ectopic third molar is a rare condition that practitioners might face in the field of pediatric dentistry and orthodontics. The early diagnosis and extraction of the adjacent ectopic third molar have been advocated, and prior research has reported a high rate of spontaneous eruption following third molar removal. However, some challenges in the daily practice are that the early diagnosis of this type of tooth impaction is difficult with conventional radiographic examination, and sometimes the early surgical removal of the maxillary third molar must be postponed because of the risks of damaging the second molar. The objective of this study is to report a case series of five young patients with maxillary second molar impaction and to discuss the difficulty of early diagnosis with the conventional radiographic examination, and unpredictability of self-correction. PMID:26321848

Maxillary molar intrusion with micro-implant anchorage (MIA).

PubMed

Park, Hyo-Sang; Jang, Bong-Kyu; Kyung, Hee-Moon

2005-11-01

Intrusion of the maxillary molars is difficult to accomplish using traditional methods of anchorage. To describe methods of maxillary molar intrusion with the aid of micro-implants. Micro-implants provide stable intra-oral anchorage and enable the maxillary molars to be intruded without the usual side effects. Three adult patients are presented showing how micro-implants can be used to intrude the maxillary molars. In the first patient micro-implants were placed in the alveolar process between the second premolar and first molar, in the second patient micro-implants were placed in the palatal alveolar process between the first and second molars, and in the third patient a micro-implant was placed in the palate paramedially. A transpalatal bar was used to prevent bucco- or linguoversion of the molars during intrusion. The maxillary molars can be intruded with intra-oral anchorage derived from microscrew implants.

Positional changes of the third molar in orthodontically treated patients

PubMed Central

Mihai, AM; Lulache, IR; Grigore, R; Sanabil, AS; Boiangiu, S; Ionescu, E

2013-01-01

Objective and Rationale. Over the years, the effects of the third molars eruption on the dental arches have been studied extensively. Still, literature provides less data regarding the effects of the orthodontic treatment on the third molars position. The aim of our study was to assess the positional changes of the third molars relative to the occlusal plane and to the second molar long axis, changes occurred during orthodontic treatment performed with or without premolar extractions. Method. This study included 20 orthodontic treated patients: 10 of them with premolar extractions and 10 without premolar extractions. The pretreatment and post treatment panoramic radiographs were analyzed, and the angles between the third molar long axis and the occlusal plane and between the long axis of the third molar and the long axis of the second molar were measured. Results. Changes in third molar position, from pretreatment to post treatment, for the two groups of patients were evaluated by using the Student’s t-test. The results of the statistical analysis revealed an improvement in third molars position, the best results were seen in the lower third molars, in the group of patients treated with premolar extractions. PMID:23904878

The indications for third-molar extractions.

PubMed

Steed, Martin B

2014-06-01

Defining the indications for third-molar extraction continues to be a topic of controversy. The dentist's management of third molars commonly hinges on identifying the presence of symptoms or disease that clearly is attributable to the third molar. Use of a guide that serves as a systematic and unambiguous way to classify third molars has been advocated. Patients' symptoms are designated as present and attributable to the third molar (Sx+) or as absent (Sx-). In addition, clinical or radiographic evidence of disease is evaluated and designated as present (D+) or absent (D-). Evidence-based clinical data developed from prospective investigations have shown that an asymptomatic third molar does not necessarily reflect the absence of disease. Current data are not sufficient to refute or support prophylactic extraction versus active surveillance for the routine management of third molars that are asymptomatic and free of disease (group D). Although decisions regarding third-molar management usually are straightforward, the evidence supporting extraction versus retention of asymptomatic disease-free (group D) third molars is lacking. Active surveillance, a prescribed program of follow-up and reassessment at regular intervals are recommended for retained third molars rather than waiting for the onset of symptoms.

Effects of Lower Third Molar Angulation and Position on Lower Arch Crowding.

PubMed

Selmani, Mimoza E; Gjorgova, Julijana; Selmani, Manushaqe E; Shkreta, Mirsad; Duci, Shkelzen B

2016-01-01

The role of the third molars in lower arch crowding has been debated for more than a century. The aim of this study was to determine the relationship between lower arch crowding and the presence of angulation and position of lower third molar. The measurements of the dental arch were made in 120 subjects aged 16 to 21 years, with average age to 18 years. The subjects were divided into two groups: Class I normal occlusion comprised 35 male and 25 female with mean age 18.87years, whereas Class I crowding comprised 27 males and 33 females with mean age 18.5 years. The dental pantomogram (DPT) were used to calculate the ratio of retromolar space (Ganss ratio), angulation of third molar to second molar and third molar to the base of the mandible. The results showed that measurements of Ganss ratio, third molar angulation to the base of the mandible, and third molar to second molar inclination, was statistically significant between crowded and normal groups. It can be concluded that there was a strong relationship between angulation and position of third molars and lower arch crowding. Key words: Third molars, angulation, lower arch, crowding

Patient with oligodontia treated with a miniscrew for unilateral mesial movement of the maxillary molars and alignment of an impacted third molar.

PubMed

Maeda, Aya; Sakoguchi, Yoko; Miyawaki, Shouichi

2013-09-01

This report describes the treatment of a 20-year-old woman with a dental midline deviation and 7 congenitally missing premolars. She had retained a maxillary right deciduous canine and 4 deciduous second molars, and she had an impacted maxillary right third molar. The maxillary right deciduous second molar was extracted, and the space was nearly closed by mesial movement of the maxillary right molars using an edgewise appliance and a miniscrew for absolute anchorage. The miniscrew was removed, and the extraction space of the maxillary right deciduous canine was closed, correcting the dental midline deviation. After the mesial movement of the maxillary right molars, the impacted right third molar was aligned. To prevent root resorption, the retained left deciduous second molars were not aligned by the edgewise appliance. The occlusal contact area and the maximum occlusal force increased over the 2 years of retention. The miniscrew was useful for absolute anchorage for unilateral mesial movement of the maxillary molars and for the creation of eruption space and alignment of the impacted third molar in a patient with oligodontia. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Effect of premolar extraction on mandibular third molar impaction in young adults.

PubMed

Türköz, Cağrı; Ulusoy, Cağrı

2013-07-01

To test the null hypothesis that orthodontic therapy with or without premolar extraction does not result in any difference in third molar impaction. Two groups were formed: 22 patients in one group with first premolar extractions and 22 patients in the other group without extractions. All patients were nongrowing subjects who had normal gonial angles and were skeletal Class I at the beginning of treatment. The available space for third molars, inclination of second and third molars, and angle between the second and third molars were evaluated. Also, the correlation of measured parameters and type of orthodontic therapy with the eruption of third molars was evaluated. Of the third molars, 81.8% were impacted in the nonextraction group and 63.6% were impacted in the extraction group. Impaction of mandibular third molars was significantly correlated to the pretreatment and posttreatment inclination of third molars and the angle between the second and third molars. In the extraction therapy group, the retromolar distance increased significantly with a mean of 1.30 ± 1.25 mm. When the inclination of the third molar is inconvenient, the tooth may remain impacted even if there is enough retromolar space.

Unique Dental Morphology of Homo floresiensis and Its Evolutionary Implications

PubMed Central

Kaifu, Yousuke; Kono, Reiko T.; Sutikna, Thomas; Saptomo, Emanuel Wahyu; Jatmiko

2015-01-01

Homo floresiensis is an extinct, diminutive hominin species discovered in the Late Pleistocene deposits of Liang Bua cave, Flores, eastern Indonesia. The nature and evolutionary origins of H. floresiensis’ unique physical characters have been intensively debated. Based on extensive comparisons using linear metric analyses, crown contour analyses, and other trait-by-trait morphological comparisons, we report here that the dental remains from multiple individuals indicate that H. floresiensis had primitive canine-premolar and advanced molar morphologies, a combination of dental traits unknown in any other hominin species. The primitive aspects are comparable to H. erectus from the Early Pleistocene, whereas some of the molar morphologies are more progressive even compared to those of modern humans. This evidence contradicts the earlier claim of an entirely modern human-like dental morphology of H. floresiensis, while at the same time does not support the hypothesis that H. floresiensis originated from a much older H. habilis or Australopithecus-like small-brained hominin species currently unknown in the Asian fossil record. These results are however consistent with the alternative hypothesis that H. floresiensis derived from an earlier Asian Homo erectus population and experienced substantial body and brain size dwarfism in an isolated insular setting. The dentition of H. floresiensis is not a simple, scaled-down version of earlier hominins. PMID:26624612

Synthesis, spectroscopic, thermal and antimicrobial investigations of charge-transfer complexes formed from the drug procaine hydrochloride with quinol, picric acid and TCNQ

NASA Astrophysics Data System (ADS)

Adam, Abdel Majid A.

2012-12-01

Intermolecular charge-transfer or proton-transfer complexes between the drug procaine hydrochloride (PC-HCl) as a donor and quinol (QL), picric acid (PA) or 7,7',8,8'-tetracyanoquinodimethane (TCNQ) as a π-acceptor have been synthesized and spectroscopically studied in methanol at room temperature. Based on elemental analyses and photometric titrations, the stoichiometry of the complexes (donor:acceptor molar ratios) was determined to be 1:1 for all three complexes. The formation constant (KCT), molar extinction coefficient (ɛCT) and other spectroscopic data have been determined using the Benesi-Hildebrand method and its modifications. The newly synthesized CT complexes have been characterized via elemental analysis, IR, Raman, 1H NMR, and electronic absorption spectroscopy. The morphological features of these complexes were investigated using scanning electron microscopy (SEM), and the sharp, well-defined Bragg reflections at specific 2θ angles have been identified from the powder X-ray diffraction patterns. Thermogravimetric analyses (TGAs) and kinetic thermodynamic parameters were also used to investigate the thermal stability of the synthesized solid CT complexes. Finally, the CT complexes were screened for their antibacterial and antifungal activities against various bacterial and fungal strains, and only the complex obtained using picric acid exhibited moderate antibacterial activity against all of the tested strains.

External root resorption of the second molar associated with third molar impaction: comparison of panoramic radiography and cone beam computed tomography.

PubMed

Oenning, Anne Caroline Costa; Neves, Frederico Sampaio; Alencar, Phillipe Nogueira Barbosa; Prado, Rodrigo Freire; Groppo, Francisco Carlos; Haiter-Neto, Francisco

2014-08-01

The aim of the present study was to compare panoramic radiography and cone beam computed tomography (CBCT) for the assessment of external root resorption (ERR) of second molars associated with impacted third molars. In addition, the prevalence of ERR in second molars and the inclinations of the third molars more associated with ERR were investigated in both imaging methods. The sample consisted of 66 individuals with maxillary and mandibular impacted third molars (n = 188) seen on panoramic radiographs and CBCT images. The presence of ERR on the adjacent second molar was investigated, and the position of the third molar was determined using Winter's classification (vertical, horizontal, mesioangular, distoangular, and transverse). Statistical analysis was performed using the χ(2) test, Fisher exact test, and 2-proportion Z test (the significance level was set at 5%). A significantly greater number of cases of ERR (P < .0001) was diagnosed from CBCT images (n = 43, 22.88%) than panoramic radiographs (n = 10, 5.31%). The agreement between the panoramic radiographs and CBCT scans for diagnosing ERR was 4.3%. Mandibular third molars in mesioangular and horizontal inclinations were more likely to cause resorption of the adjacent teeth. CBCT should be indicated for the diagnosis of ERR in second molars when direct contact between the mandibular second and third molars has been observed on panoramic radiographs, especially in mesioangular or horizontal impactions. Furthermore, considering the propensity of these teeth to cause ERR in second molars, third molar prophylactic extraction could be suggested. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Banding versus bonding of first permanent molars: a multi-centre randomized controlled trial.

PubMed

Nazir, Mariyah; Walsh, Tanya; Mandall, Nicky A; Matthew, Susie; Fox, Dee

2011-06-01

To assess the effectiveness of banding versus bonding of first permanent molars during fixed appliance treatment; in terms of attachment failure, patient discomfort and post-treatment enamel demineralization. Multi-centre randomized clinical trial. One District General Hospital Orthodontic Department and two Specialist Orthodontic Practices. Orthodontic patients aged between 10 and 18 years old, randomly allocated to either receive molar bands (n=40) or molar bonds (n=40). Bands were cemented with a conventional glass ionomer cement and tubes were bonded with light-cured composite to all four first permanent molar teeth for each subject. Attachments were reviewed at each recall appointment to assess loosening or loss. The clinical end point of the trial was the day of appliance debond. Enamel demineralization at debond was assessed using the modified International Caries Assessment and Detection System (ICDAS). The first time failure rate for molar bonds was 18·4% and 2·6% for molar bands (P=0·0002). Survival analysis demonstrated molar bonds were more likely to fail compared with molar bands. First permanent molars with bonded tubes experienced more demineralization than those with cemented bands (P=0·027). There was no statistically significant difference in discomfort experienced by patients after banding or bonding first permanent molars (P>0·05). This study shows that as part of fixed appliance therapy, American Orthodontics photoetched first permanent molar bands cemented with 3M ESPE Ketac-Cem perform better than American Orthodontics low profile photo-etched and mesh-based first permanent molar tubes bonded with 3M Unitek Transbond XT in terms of failure behaviour and molar enamel demineralization.

Effect of synthesis variables on tack in urea-formaldehyde resin

Treesearch

R.J. Leicht; C.Y. Hse; R.C. Tang

1988-01-01

The degree of tack-the ability of resin to adhere to another surface under light pressure and over short time- in urea-formaldehyde resin varies throughout the particle board manufacturing process and affects mill maintenance and board quality. A three-part study was conducted to evaluate the effects of certain synthesis variables- molar formaldehyde:urea ratio,...

Evaluation of adjunctive effect of low-level laser Therapy on pain, swelling and trismus after surgical removal of impacted lower third molar: A double blind randomized clinical trial.

PubMed

Farhadi, Farrokh; Eslami, Hosein; Majidi, Alireza; Fakhrzadeh, Vahid; Ghanizadeh, Milad; KhademNeghad, Sahar

2017-09-30

Wisdom teeth remains impacted in the jaw due to several reasons and surgery of impacted wisdom teeth is one of the most common surgeries in dental clinics. Pain, swelling and trismus are the common complications after this surgery which affect quality of life. In articles, various methods are introduced to control immediate inflammatory-response associated with third-molar surgery. The aim of this study is to evaluate the adjunctive effect of low-level laser Therapy on pain, swelling and trismus after surgical removal of impacted lower third molar. This double-blind randomized controlled trial (RCT) was conducted on two groups of 24 patients (age range of 18-35) that had referred to surgical ward of Faculty of Dentistry, Tabriz University of Medical Sciences for surgery of their mandibular third molar(2015-16). All the subjects were systemically healthy and had at least one impacted mandibular third molar. After surgery, in experimental group, the laser was applied intraorally (inside the tooth socket) and extraorally (at the insertion point of the masseter muscle) immediately after surgery in contact with the target area for 25 seconds each. The laser energy was 2.5 J per area with an energy density of 5 J/ cm 2 at the surface of the probe (spot size= 0.5 cm 2 ). In the other group, as the control group, it was pretended to radiate. Trismus, pain, and swelling were evaluated on the first and seventh days after surgery. The obtained data were evaluated using SPSS 16 software and independent samples T-test. In the group where LLLT had been used, P> 0.05 was calculated for pain, swelling, and trismus on days 1 and 7 after surgery that was not statistically significant. Under limitations of this study, using low-power laser with mentioned parameters, clinically reduces pain, swelling and trismus after surgical removal of impacted mandibular wisdom, but not statistically significant.

Dentists' perception, knowledge, and clinical management of molar-incisor-hypomineralisation in Kuwait: a cross-sectional study.

PubMed

Alanzi, Abrar; Faridoun, Anfal; Kavvadia, Katerina; Ghanim, Aghareed

2018-03-07

Molar-incisor Hypomineralisation (MIH) is considered as a global dental problem. There is little knowledge of general dental practitioners (GDPs) and dental specialists (DSs) about this condition in different parts of the world, particularly in Gulf Cooperation Council (GCC) countries. Hence, this study has been carried out to assess the knowledge of GDPS and DSs in Kuwait about MIH condition, its clinical presentation and management. Findings would help national school oral health program (SOHP) to promote good oral healthcare. A structured questionnaire was distributed to 310 attendees of the 18th Kuwait Dental Association Scientific Conference, Kuwait. Data concerning demographic variables, prevalence, diagnosis, severity, training demands and clinical management of MIH were collected. A response rate of 71.3% (221/310) was reported. 94% of respondents noticed MIH in their practice. Yellow/brown demarcation has been observed as a common clinical presentation (> 50%). Almost 10-20% of MIH prevalence has been reported by the participants. Resin composite was the dental material often used in treating MIH teeth (~ 65%), and fewer than half would use it for treating moderately affected molars. Most respondents would use preformed metal crowns for severe MIH (63%). Dental journals were the information source for DSs; whereas, the internet was the information source for GDPs. Child's behaviour was the main reported barrier for treatment of MIH affected children. Many GDPs felt unconfident when diagnosing MIH compared to dental specialists. Respondents supported the need to investigate MIH prevalence and to receive a clinical training. Molar incisor hypomineralisation is a recognised dental condition by practitioners in Kuwait. Yellow/brown demarcated opacities were the most reported clinical presentation, and the composite resin was the most preferred dental material for restoring MIH teeth. Most GDPs and dental specialists would use preformed metal crowns for severely affected molars. GDPs reported low levels of confidence in MIH diagnosis which necessitates conducting continuing education courses to provide high- quality dental care for children with MIH.

Compensation trends of the angulation of first molars: retrospective study of 1403 malocclusion cases.

PubMed

Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

2014-09-01

We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged <12 years and least distally in cases aged >16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability.

Endodontic treatment of an unusual connation of permanent mandibular molars: a case report.

PubMed

Liu, Shengbo; Fan, Bing; Peng, Bin; Fan, Mingwen; Bian, Zhuan

2006-10-01

A 27-year-old patient with an anomalous mandibular molar was referred for endodontic therapy. Clinical and radiographic examination revealed the connation of a second mandibular molar with a third molar. Challenging endodontic therapy was performed in the unusual connated molars. A 2-year recall showed good treatment result.

Third molar development: measurements versus scores as age predictor.

PubMed

Thevissen, P W; Fieuws, S; Willems, G

2011-10-01

Human third molar development is widely used to predict chronological age of sub adult individuals with unknown or doubted age. For these predictions, classically, the radiologically observed third molar growth and maturation is registered using a staging and related scoring technique. Measures of lengths and widths of the developing wisdom tooth and its adjacent second molar can be considered as an alternative registration. The aim of this study was to verify relations between mandibular third molar developmental stages or measurements of mandibular second molar and third molars and age. Age related performance of stages and measurements were compared to assess if measurements added information to age predictions from third molar formation stage. The sample was 340 orthopantomograms (170 females, 170 males) of individuals homogenously distributed in age between 7 and 24 years. Mandibular lower right, third and second molars, were staged following Gleiser and Hunt, length and width measurements were registered, and various ratios of these measurements were calculated. Univariable regression models with age as response and third molar stage, measurements and ratios of second and third molars as predictors, were considered. Multivariable regression models assessed if measurements or ratios added information to age prediction from third molar stage. Coefficients of determination (R(2)) and root mean squared errors (RMSE) obtained from all regression models were compared. The univariable regression model using stages as predictor yielded most accurate age predictions (males: R(2) 0.85, RMSE between 0.85 and 1.22 year; females: R(2) 0.77, RMSE between 1.19 and 2.11 year) compared to all models including measurements and ratios. The multivariable regression models indicated that measurements and ratios added no clinical relevant information to the age prediction from third molar stage. Ratios and measurements of second and third molars are less accurate age predictors than stages of developing third molars. Copyright © 2011 Elsevier Ltd. All rights reserved.

Monitoring for periodontal inflammatory disease in the third molar region.

PubMed

Golden, Brent A; Baldwin, Carrie; Sherwood, Colin; Abdelbaky, Omar; Phillips, Ceib; Offenbacher, Steven; White, Raymond P

2015-04-01

To assess changes at 2-year intervals in the periodontal status of the third molar region in participants enrolled with asymptomatic third molars and no clinical evidence of third molar region periodontal pathology. The included participants who presented with a healthy periodontal status (all probing depths [PDs], <4 mm) in the third molar region, defined as distal of second molars and around adjacent third molars, were from a larger longitudinal study of participants with asymptomatic third molars. Full-mouth periodontal PD data from 6 sites per tooth were obtained clinically at enrollment and at subsequent 2-year intervals. Data were aggregated to the patient level. Outcome variables were the presence or absence of periodontal pathology, defined as at least 1 PD of at least 4 mm in the third molar region. One hundred twenty-nine participants had a third molar region PD shallower than 4 mm at enrollment. Most participants were Caucasian (85%), women (60%), younger than 25 years (62%), educated beyond high school (84%), and with good oral health habits. At 6 years, excluding the 61 participants lost to follow-up, 47% participants had had third molars removed, 21% had developed at least 1 PD of at least 4 mm in the third molar region since enrollment, and 32% retained the periodontal status at enrollment (all PDs in third molar region, <4 mm). Demographic characteristics were not statistically different for participants followed for 6 years compared with those lost to follow-up. Although not all participants could be followed for 6 years after enrollment or chose to retain third molars, one third of participants maintained the third molar region periodontal status assessed at baseline for 6 years after enrollment; no clinical evidence of pathology developed over time. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Study on the temperature-dependent coupling among viscosity, conductivity and structural relaxation of ionic liquids.

PubMed

Yamaguchi, Tsuyoshi; Yonezawa, Takuya; Koda, Shinobu

2015-07-15

The frequency-dependent viscosity and conductivity of three imidazolium-based ionic liquids were measured at several temperatures in the MHz region, and the results are compared with the intermediate scattering functions determined by neutron spin echo spectroscopy. The relaxations of both the conductivity and the viscosity agree with that of the intermediate scattering function at the ionic correlation when the relaxation time is short. As the relaxation time increases, the relaxations of the two transport properties deviate to lower frequencies than that of the ionic structure. The deviation begins at a shorter relaxation time for viscosity than for conductivity, which explains the fractional Walden rule between the zero-frequency values of the shear viscosity and the molar conductivity.

Electrical conductivity of solutions of copper(II) nitrate crystalohydrate in dimethyl sulfoxide

NASA Astrophysics Data System (ADS)

Mamyrbekova, Aigul K.; Mamitova, A. D.; Mamyrbekova, Aizhan K.

2016-06-01

Conductometry is used to investigate the electric conductivity of Cu(NO3)2 ṡ 3H2O solutions in dimethyl sulfoxide in the 0.01-2.82 M range of concentrations and at temperatures of 288-318 K. The limiting molar conductivity of the electrolyte and the mobility of Cu2+ and NO 3 - ions, the effective coefficients of diffusion of copper(II) ions and nitrate ions, and the degree and constant of electrolytic dissociation are calculated for different temperatures from the experimental results. It is established that solutions containing 0.1-0.6 M copper nitrate trihydrate in DMSO having low viscosity and high electrical conductivity can be used in electrochemical deposition.

Radiographic assessment of third molars development and it's relation to dental and chronological age in an Iranian population.

PubMed

Monirifard, Mohamad; Yaraghi, Navid; Vali, Ava; Vali, Asana; Vali, Amrita

2015-01-01

The aim of the present study was to estimate chronological age based on third molar development and to determine the association between dental age and third molar calcification stages. In this cross-sectional study, 505 digital panoramic radiographs of 223 males (44.2%) and 282 females (55.8%) between the age of 6 and 17 were selected from patients who were treated in Departments of Pediatrics and Orthodontics of Isfahan University of Medical Sciences between the years of 2009 and 2013. Correlation between chronological age and third molar development was analyzed with SPSS 21 using Spearman's Rank correlation coefficient, Chi-square test and multiple regression statistical tests (P < 0.05). All third molars demonstrated a highly significant correlation with dental age (P < 0.001). The teeth showing the highest relationship with dental age were mandibular left third molar in males and mandibular right third molar in females (r s = 0.072). When multiple regression was used to predict dental age based on molar calcification stage, the only significant correlation was between maxillary left third molar in males (P < 0.05). There was no statistically significant correlation for any of third molars in females. Relationship between chronological age and molars development stage was significant in all age subgroups and in both gender (P < 0.001). Strong correlation was observed between left third molars and dental age in males. Results showed that third molar calcification stage can be used as an age predictor and in general mandibular teeth seems to be more reliable for this purpose in both genders and in all ages.

4% lidocaine versus 4% articaine for inferior alveolar nerve block in impacted lower third molar surgery.

PubMed

Boonsiriseth, Kiatanant; Chaimanakarn, Sittipong; Chewpreecha, Prued; Nonpassopon, Natee; Khanijou, Manop; Ping, Bushara; Wongsirichat, Natthamet

2017-03-01

No study has compared lidocaine with articaine, each at a concentration of 4% and combined with epinephrine. The purpose of this study was to compare the effectiveness of 4% lidocaine with that of 4% articaine, with a concentration of 1:100,000 epinephrine added to each, in an inferior alveolar nerve block for surgery on impacted lower third molars. This study was conducted at the Faculty of Dentistry, Mahidol University in Bangkok, Thailand. The randomized, single-blind, comparative split-mouth study was carried out in patients with symmetrically impacted lower third molars, as identified on panoramic radiographs. Each patient underwent surgery for the removal of the lower third molars by the same surgeon under local anesthesia at two separate visits, 3 weeks apart. The onset and duration of local anesthesia, intra-operative pain, surgical duration, and number of additional anesthetics administered were recorded. The subjective and objective onset of action for the local anesthetics showed statistically significant differences (P < 0.05). However, the intra-operative pain, surgical duration, duration of local anesthesia, and number of additional anesthetics administered did not show statistically significant differences. The use of 4% articaine for the inferior alveolar nerve block was clinically more effective in the onset of subjective and objective anesthesia as compared with the use of 4% lidocaine. Based on the pain scores from the visual analogue scale, 4% lidocaine provided more analgesia during the procedure, and patients noted less intra-operative pain than with 4% articaine; however, the difference was not clinically significant.

Demirjian's stages and Cameriere's third molar maturity index to estimate legal adult age in Peruvian population.

PubMed

Quispe Lizarbe, Roselhy Juliana; Solís Adrianzén, Christian; Quezada-Márquez, Milushka Miroslava; Galić, Ivan; Cameriere, Roberto

2017-03-01

To compare the accuracy of Demirjian's stages (DS) and Cameriere's third molar maturity index cut-off value (I 3M <0.08) to estimate the age of majority on panoramic radiographs (OPTs) from the dental clinic of the Scientific University of the South (UCSUR), Lima, Peru. An observational cross-sectional study was conducted on the sample of 208 digital panoramic radiographs of patients aged 14-22years examined during 2015 in UCSUR. The left lower third molars were analyzed using Adobe Photoshop® CS6. An effectiveness of specific DS and I 3M <0.08 was evaluated by using accurate classification, sensitivity, specificity, positive (LR+) and negative (LR-) likelihood ratios and Bayes post-test probability (p). Only G and H stages were practical for classify adults and minors in the tested sample, while I 3M <0.08 showed the best performance in both sexes. For I 3M <0.08, the accurate classification, sensitivity and specificity were 0.96, 0.96, 0.96 and 0.90, 0.84 and 0.95 in males and females, respectively. Values of LR+, LR- and p were 24.96, 0.04, 0.97 and 15.68, 0.17, 0.95 in males and females, respectively. The specific cut-off value of third molar maturity index (I 3M <0.08) showed to be more accurate in discriminating adults and minors in Peruvian sample when a test with high sensitivity and specificity is required. Copyright © 2017 Elsevier B.V. All rights reserved.

Racemized and Isomerized Proteins in Aging Rat Teeth and Eye Lens

PubMed Central

Warmack, Rebeccah A.; Mansilla, Eduardo; Goya, Rodolfo G.

2016-01-01

Abstract The quantification of aspartic acid racemization in the proteins of nonmetabolically active tissues can be used as a measure of chronological aging in humans and other long-lived organisms. However, very few studies have been conducted in shorter-lived animals such as rodents, which are increasingly used as genetic and metabolic models of aging. An initial study had reported significant changes in the ratio of d- to l-aspartate in rat molars with age. Using a sensitive HPLC method for the determination of d- and l-aspartate from protein hydrolysates, we found no accumulation of d-aspartate in the molars of 17 rats that ranged in age from 2 to 44 months, and the amount of d-aspartate per molar did not correspond with molar eruption date as had been previously reported. However, developing an alternate approach, we found significant accumulation of isomerized aspartyl residues in eye lens proteins that are also formed by spontaneous degradation processes. In this study, we used the human protein l-isoaspartate/d-aspartate O-methyltransferase (PCMT1) as an analytical reagent in a sensitive and convenient procedure that could be used to rapidly examine multiple samples simultaneously. We found levels of isomerized aspartyl residues to be about 35 times higher in the lens extracts of 18-month-old rats versus 2-month-old rats, suggesting that isomerization may be an effective marker for biological aging in this range of ages. Importantly, we found that the accumulation appeared to plateau in rats of 18 months and older, indicating that potentially novel mechanisms for removing altered proteins may develop with age. PMID:26650547

Radiographic study of the mandibular retromolar canal: an anatomic structure with clinical importance.

PubMed

von Arx, Thomas; Hänni, Andrea; Sendi, Pedram; Buser, Daniel; Bornstein, Michael M

2011-12-01

The retromolar canal is an anatomic structure of the mandible with clinical importance. This canal branches off from the mandibular canal behind the third molar and travels to the retromolar foramen in the retromolar fossa. The retromolar canal might conduct accessory innervation to the mandibular molars or contain an aberrant buccal nerve. Patients referred for panoramic radiography were consecutively enrolled, provided a limited cone-beam computed tomography (CBCT) scan had also been taken in the area of interest. Radiographs were retrospectively screened for the presence of a retromolar canal, and linear measurements (distance to second molar, height, width) were taken. One hundred twenty-one sides in 100 patients were evaluated (100 unilateral and 21 bilateral cases). A total of 31 retromolar canals were identified with CBCT (25.6%). Only 7 of these canals were also seen on the corresponding panoramic radiographs. The existence of a retromolar canal was not statistically related to gender or side. With regard to the linear measurements, the mean distance from the retromolar canal to the second molar was 15.16 mm (±2.39 mm), the mean height of the canal was 11.34 mm (±2.36 mm), and the mean width was 0.99 mm (±0.31 mm). This radiographic study documents a frequency of 25% for the presence of a retromolar canal. The clinician is advised to preserve this anatomic variation when performing surgery in the retromolar area and to consider additional locoregional anesthesia in the case of failed mandibular block anesthesia. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Role of reduced precursor and solvolytic reagent molar ratio on preparation and properties of ionogel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupta, Abhishek Kumar; Verma, Yogendra Lal; Singh, Manish Pratap

In the present study, ionogels have been synthesized by immobilizing IL (1-ethyl-3-methylimidazolium tetrafluoroborate) in silica gel matrices using non-aqueous route. In this process, tetraethyl orho-silane (TEOS) as a precursor to silicon dioxide and formic acid as a solvolytic gelating reagent in reduced molar ratio 1:4 were used. We find that reduced molar concentration of formic acid results the formation of ionogels having less number of closed pores (totally isolated from their neighbours), larger density and stable monolithic form. TEM and SEM measurements are used to visualize the morphology of sample and closed pores present in the sample. N{sub 2}-sorption measurementmore » is used to measure the pore parameters of the silica matrices which shows the mesoporous structure. DSC and TGA results show the change in phase transition temperature and thermal stability of IL upon confinement in silica matrices. Moreover, ionic conductivity of bulk and confined IL is measured using impedance spectroscopy and it has been found that it increases with increasing the temperature as well as concentration of IL in ionogels. Apart from these characterization techniques, ionogels have been characterized using FTIR and fluorescence spectroscopy which exhibit the change in vibrational frequencies and fluorescence behaviour of confined IL. - Highlights: • Synthesis of stable ionogel using non-hydrolytic route with reduced precursor and solvolytic reagent molar ratio. • Ionogels are free from entrapped residual reaction product. • The ionogels synthesized with higher amount of ionic liquids show bulk liquid like electrical behaviour.« less

Comparison of Clinical Efficacies of Preoperatively Initiated Naproxen Sodium-Codeine Phosphate in Combination, Diclofenac Potassium, and Benzydamine Hydrochloride for Pain, Edema, and Trismus After Extraction of Impacted Lower Third Molar: A Randomized Double-Blind Study.

PubMed

Cigerim, Levent; Eroglu, Cennet Neslihan

2018-03-01

The aim of this study was to compare the clinical efficacies of naproxen sodium-codeine phosphate in combination, benzydamine hydrochloride, and diclofenac potassium for pain, edema, and trismus after lower third molar extraction. Ninety healthy volunteers in whom impacted third molar extraction was indicated were randomly distributed into 3 groups. One hour before the tooth-extraction process, patients were administered one of the following drugs: naproxen sodium, 550 mg, and codeine phosphate, 30 mg, in a tablet; diclofenac potassium, 50 mg, in a coated pill; or benzydamine hydrochloride, 50 mg, in a coated pill. Pain assessment was conducted via a visual analog scale; edema assessment, by measuring the distances between predetermined facial landmarks; and trismus assessment, by measuring interincisal distance. Regarding rescue analgesics (paracetamol, 500 mg), the number and time of use by patients were recorded. Naproxen sodium-codeine phosphate was more effective for pain, edema, and trismus than diclofenac potassium and benzydamine hydrochloride (P < .05). Benzydamine hydrochloride yielded similar clinical responses to diclofenac potassium (P > .05). No drug-related side effects were observed. Naproxen sodium-codeine phosphate constitutes the drug of choice after the extraction of a patient's impacted lower third molar. Benzydamine hydrochloride has similar efficacy to diclofenac potassium, and it can be used as a nonsteroidal anti-inflammatory analgesic drug. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Consequences of early extraction of compromised first permanent molar: a systematic review.

PubMed

Saber, Afnan M; Altoukhi, Doua H; Horaib, Mariam F; El-Housseiny, Azza A; Alamoudi, Najlaa M; Sabbagh, Heba J

2018-04-05

The aim of this study was to systematically review the literature to determine the sequelae of early extraction of compromised first permanent molars (FPMs) with regard to the skeletal and dental development of 5- to 15-year-old children. Meta-analysis was conducted when applicable. Our research protocol included a search strategy, inclusion/exclusion criteria, and a data extraction plan. The search engines used were PubMed, Scopus, and Science Direct. Study selection was performed independently by three reviewers. Articles published from 1960 to 2017 were reviewed based on inclusion and exclusion criteria. Meta-analysis was performed to compare space closure between upper and lower arches. Eleven studies fulfilled the inclusion criteria. The consequences were decrease in post extraction space, accelerated development and eruption of second permanents molars (SPMs) and third molars, a decrease in caries and/or fillings on the proximal surfaces of adjacent teeth, lingual tipping and retrusion of incisors, and counter clockwise rotation of the occlusal plane. There were several consequences of early extraction of FPMs, which were related to skeletal and dental development. Our systematic review suggests that comprehensive evaluation of the compromised FPMs should be performed before planning an extraction. The ideal time for FPM extraction is when the SPM is at the early bifurcation stage in order to achieve complete closure of the extraction space by the SPM. Benefits should be weighed over the risks to decrease the risk of unfavorable outcomes as much as possible. However, due to the limited evidence on the outcomes and variables that influence them, high-quality prospective studies are needed.

Size of the lower third molar space in relation to age in Serbian population.

PubMed

Zelić, Ksenija; Nedeljković, Nenad

2013-10-01

It is considered that the shortage of space is the major cause of the third molar impaction. The aim of this study was to establish the frequency of insufficient lower third molar eruption space in Serbian population, to question the differences in this frequency in the subjects of different age, to determine the influence of the lower third molar space (retromolar space) size on third molar eruption, and to investigate a possible correlation between the size of gonial angle and the space/third molar width ratio. Digital orthopantomograms were taken from 93 patients divided into two groups: early adult (16-18 years of age) and adult (18-26) patients. Retromolar space, mesiodistal third molar crown width, gonial angle and eruption levels were measured. The space/third molar width in early adult subjects was smaller (p < 0.0001) and insufficient space was significantly more frequent (p = 0.0003) than in adult patients. Considerably more third molars erupted in case of enough space in both age groups (p < 0.0001). There was no difference between the means of gonial angle size in relations to the available space. The retromolar space/third molar width ratio is more favorable in adult subjects. Gonial angle is not in correlation with the retromolar space/third molar width ratio.

Clinical significance of computed tomography assessment for third molar surgery

PubMed Central

Nakamori, Kenji; Tomihara, Kei; Noguchi, Makoto

2014-01-01

Surgical extraction of the third molar is the most commonly performed surgical procedure in the clinical practice of oral surgery. Third molar surgery is warranted when there is inadequate space for eruption, malpositioning, or risk for cyst or odontogenic tumor formation. Preoperative assessment should include a detailed morphologic analysis of the third molar and its relationship to adjacent structures and surrounding tissues. Due to developments in medical engineering technology, computed tomography (CT) now plays a critical role in providing the clear images required for adequate assessment prior to third molar surgery. Removal of the maxillary third molar is associated with a risk for maxillary sinus perforation, whereas removal of the mandibular third molar can put patients at risk for a neurosensory deficit from damage to the lingual nerve or inferior alveolar nerve. Multiple factors, including demographic, anatomic, and treatment-related factors, influence the incidence of nerve injury during or following removal of the third molar. CT assessment of the third molar prior to surgery can identify some of these risk factors, such as the absence of cortication between the mandibular third molar and the inferior alveolar canal, prior to surgery to reduce the risk for nerve damage. This topic highlight presents an overview of the clinical significance of CT assessment in third molar surgery. PMID:25071882

Comparative evaluation of molar distalization therapy with erupted second molar: Segmented versus Quad Pendulum appliance.

PubMed

Caprioglio, Alberto; Cozzani, Mauro; Fontana, Mattia

2014-01-01

There are controversial opinions about the effect of erupted second molars on distalization of the first molars. Most of the distalizing devices are anchored on the first molars, without including second molars; so, differences between sequentially distalize maxillary molars (second molar followed by the first molar) or distalize second and first molars together are not clear. The aim of the study was to compare sequential versus simultaneous molar distalization therapy with erupted second molar using two different modified Pendulum appliances followed by fixed appliances. The treatment sample consisted of 35 class II malocclusion subjects, divided in two groups: group 1 consisted of 24 patients (13 males and 11 females) with a mean pre-treatment age of 12.9 years, treated with the Segmented Pendulum (SP) and fixed appliances; group 2 consisted of 11 patients (6 males and 5 females) with a mean pre-treatment age of 13.2 years, treated with the Quad Pendulum (QP) and fixed appliances. Lateral cephalograms were obtained before treatment (T1), at the end of distalization (T2), and at the end of orthodontic fixed appliance therapy (T3). A Student t test was used to identify significant between-group differences between T1 to T2, T2 to T3, and T1 to T3. QP and SP were equally effective in distalizing maxillary molars (3.5 and 4 mm, respectively) between T1 and T2; however, the maxillary first molar showed less distal tipping (4.6° vs. 9.6°) and more extrusion (1.1 vs. 0.2 mm) in the QP group than in the SP group, as well as the vertical facial dimension, which increased more in the QP group (1.2°) than in the SP group (0.7°). At T3, the QP group maintained greater increase in lower anterior facial height and molar extrusion and decrease in overbite than the SP group. Quad Pendulum seems to have greater increase in vertical dimension and molar extrusion than the Segmented Pendulum.

Ultrasonographic signs of partial hydatidiform mole.

PubMed

Muminhodzic, Lejla; Bogdanovic, Gordana

2013-01-01

This study aimed at investigating ultrasonographic features of partial hydatidiform mole to establish a proper diagnosis. This was a retrospective study of 70 pregnancies which were divided into two groups: group I--35 pregnant women with a molar pregnancy diagnosed in the first trimester; group II--35 pregnant women with physiological pregnancy spontaneously aborted in the first trimester caused by the cervical insufficiency. Evacuation of the uterus by uterine suction or curettage and pathomorphological analysis ofovular tissue were conducted in both groups. Ultrasonographic parameters were analyzed. Theca lutein cysts and hydropic degeneration of villi, enlarged uterus and empty gestational sac, intrauterine hematoma significantly prevailed in the pregnant women with the molar pregnancies. Diagnosis of the partial hydatidiform mole in the first trimester is likely though not enough reliable. Thereby, additional diagnostic methods might be important as well to confirm an early diagnosis of mole.

The third molar as an age marker in adolescents: new approach to age evaluation.

PubMed

Rozkovcova, Eva; Dostalova, Tatjana; Markova, Marie; Broukal, Zdenek

2012-09-01

Adolescence is a relatively short period between childhood and adulthood. It is very difficult to determine adulthood based on biological indicators. The third molar may be considered a potential age marker for the period between the ages of 16-21. Our study evaluated a set of 1700 panoramic radiographs of individuals aged between 5 and 21 years. Results confirmed the statistically significant difference in the course of third molars development. The mean deviation for individuals with one third molar agenesis is -0.98 years, for individuals with two third molars agenesis -1.89 years, and with three molars agenesis -3.28 years. Thus, the extent of the deviation is directly proportional to the number of unformed third molars. The calculation of age according to the mean of stages of all third molars could lead to the underestimation of age. No intergender differences were found. Age determination using third molars could be used for forensic purposes. © 2012 American Academy of Forensic Sciences.

Loss of Permanent First Molars in the Mixed Dentition: Circumstances Resulting in Extraction and Requiring Orthodontic Management.

PubMed

Mathu-Muju, Kavita R; Kennedy, David B

2016-10-15

Extraction of significantly compromised permanent first molars may be indicated during the mixed dentition stage of occlusal development. The purpose of this article was to review circumstances that can result in the loss of a permanent first molar-including dental caries, molar incisor hypomineralization, eruption disturbances of permanent teeth, and failure of restorative treatment to affirm that a complete dental arch is not necessary for the existence of a functional dental arch. The extraction of permanent first molar(s) with subsequent orthodontic treatment in a young patient can be considered a cost-effective alternative to placing complex restorations that require replacement over the lifespan. Approaches to establish a functional dental arch in the event of the loss of a permanent first molar(s) are outlined. Additionally, orthodontic diagnostic and treatment principles are reviewed. Case histories are provided to illustrate the clinical management of permanent first molar extractions to achieve a functional dental arch.

The flap recovery on the impacted lower third molar surgery comparing 3 different flap designs: a clinical study.

PubMed

Ottria, L; Luciani, F; Piva, P; Alagna, A M; Arcuri, C; Bartuli, F N

2017-01-01

The purpose of the study was to analyze the healing of the deep and superficial lower first and second molars periodontium, after the surgical extraction of the contiguous impacted third molar, comparing 3 mucoperiosteal flap designs. 150 patients which had to undergo a impacted lower third molar surgery were enrolled in this study. They were checked from day 0 to day 90, in order to focus on the recovery quality of the soft tissues around the lower second molar, comparing 3 different flap designs. No intraoperatory incident happened. The complete recovery of the periodontium around the second molar has been shown in each patient after 90 days from surgery and each adverse reaction happened within the sixth week after surgery. Only 2 slight gengival recessions 0,5 mm have been find out. The impacted third molar surgery is an operation that, if rightly programmed and performed, is relatively safe. Besides, the correct handling and management of periodontium around the second molar and the choice of the flap type to be used support a correct recovery on the second molar periodontium, avoiding any long-term damage. This study wanted to analyze the healing of the deep and superficial lower second molar periodontium, after the impacted lower third molar surgery. In order to improve the surgical technique used for lower third molar germectomies, we wanted to compare 3 different kind of flap designs.

Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

PubMed Central

Sodagar, A.; Ahmad Akhoundi, M. S.; Rafighii, A.; Arab, S.

2011-01-01

Objective Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD) which is a simple molar distalizing appliance. Materials and Methods Sixteen patients (12 girls, four boys) with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. The screws were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance. Results Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was 0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH) decreased 1.28±1.36 mm. Conclusion BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance. PMID:22457837

Compensation trends of the angulation of first molars: retrospective study of 1 403 malocclusion cases

PubMed Central

Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

2014-01-01

We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1 403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged <12 years and least distally in cases aged >16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability. PMID:24699185

The flap recovery on the impacted lower third molar surgery comparing 3 different flap designs: a clinical study

PubMed Central

OTTRIA, L.; LUCIANI, F.; PIVA, P.; ALAGNA, A.M.; ARCURI, C.; BARTULI, F.N.

2017-01-01

SUMMARY Aim The purpose of the study was to analyze the healing of the deep and superficial lower first and second molars periodontium, after the surgical extraction of the contiguous impacted third molar, comparing 3 mucoperiosteal flap designs. Materials and methods 150 patients which had to undergo a impacted lower third molar surgery were enrolled in this study. They were checked from day 0 to day 90, in order to focus on the recovery quality of the soft tissues around the lower second molar, comparing 3 different flap designs. Results No intraoperatory incident happened. The complete recovery of the periodontium around the second molar has been shown in each patient after 90 days from surgery and each adverse reaction happened within the sixth week after surgery. Only 2 slight gengival recessions 0,5 mm have been find out. Conclusions The impacted third molar surgery is an operation that, if rightly programmed and performed, is relatively safe. Besides, the correct handling and management of periodontium around the second molar and the choice of the flap type to be used support a correct recovery on the second molar periodontium, avoiding any long-term damage. Clinical significance This study wanted to analyze the healing of the deep and superficial lower second molar periodontium, after the impacted lower third molar surgery. In order to improve the surgical technique used for lower third molar germectomies, we wanted to compare 3 different kind of flap designs. PMID:29285329

Analysis of C-shaped root canal configuration in maxillary molars in a Korean population using cone-beam computed tomography

PubMed Central

Jo, Hyoung-Hoon; Min, Jeong-Bum

2016-01-01

Objectives The purpose of this study was to investigate the incidence of root fusion and C-shaped root canals in maxillary molars, and to classify the types of C-shaped canal by analyzing cone-beam computed tomography (CBCT) in a Korean population. Materials and Methods Digitized CBCT images from 911 subjects were obtained in Chosun University Dental Hospital between February 2010 and July 2012 for orthodontic treatment. Among them, a total of selected 3,553 data of maxillary molars were analyzed retrospectively. Tomography sections in the axial, coronal, and sagittal planes were displayed by PiViewstar and Rapidia MPR software (Infinitt Co.). The incidence and types of root fusion and C-shaped root canals were evaluated and the incidence between the first and the second molar was compared using Chi-square test. Results Root fusion was present in 3.2% of the first molars and 19.5% of the second molars, and fusion of mesiobuccal and palatal root was dominant. C-shaped root canals were present in 0.8% of the first molars and 2.7% of the second molars. The frequency of root fusion and C-shaped canal was significantly higher in the second molar than the first molar (p < 0.001). Conclusions In a Korean population, maxillary molars showed total 11.3% of root fusion and 1.8% of C-shaped root canals. Furthermore, root fusion and C-shaped root canals were seen more frequently in the maxillary second molars. PMID:26877991

Cryotherapy and Topical Minocycline as Adjunctive Measures to Control Pain After Third Molar Surgery: An Exploratory Study

PubMed Central

Gelesko, Savannah; Long, Leann; Faulk, Jan; Phillips, Ceib; Dicus, Carolyn; White, Raymond P.

2013-01-01

Purpose To assess the impact of cryotherapy or topical minocycline on patients’ perceptions of recovery from pain after third molar surgery in an exploratory comparative-effectiveness study. Patients and Methods Subjects aged at least 14 years who were having all 4 third molars removed were enrolled in 3 separate institutional review board–approved studies. Study groups included subjects treated with a passively applied cold wrap for 24 hours postoperatively, subjects treated with topical minocycline during surgery, and subjects enrolled in a nonconcurrent comparison group who had received neither topical minocycline nor directed cryotherapy. Third molar surgery was performed in all cases by trained surgeons using the same protocol. An exact Kruskal-Wallis test was used to compare the distributions of the worst and average pain scores and a Fisher exact test to compare verbal responses from Gracely pain scales among the 3 groups for postsurgical days (PSDs) 1 to 3. Results This study comprised 51 cryotherapy subjects (2005–2009), 63 minocycline subjects (2003–2004), and 92 comparison-group subjects (2002–2006) who were treated at academic centers and in community practices across the United States (N = 206). Demographic descriptors were similar among all groups. For PSDs 1 through 3 (unadjusted), the highest scores for worst pain (6–7 [out of 7] on Likert-type scale) were reported less frequently in each of the study groups than in subjects in the comparison group, although the numbers of subjects reporting the highest scores were few. The distribution of pain outcomes was significantly different among the 3 groups for worst pain and affective words on PSD 1 (P = .04 for both). However, the small number of subjects who reported the highest pain scores precluded adequate multivariate statistical analyses for all outcomes on PSD 1 to 3. Conclusions Data from this exploratory study suggest that adjunctive therapy to decrease postoperative pain—cryotherapy or topical minocycline—might be effective at moderating the patient’s highest pain levels after third molar surgery. The topic should be studied further in a multicenter, prospective, randomized trial. PMID:21802812

Which risk factors are associated with neurosensory deficits of inferior alveolar nerve after mandibular third molar extraction?

PubMed

Kim, Jin-Woo; Cha, In-Ho; Kim, Sun-Jong; Kim, Myung-Rae

2012-11-01

Mandibular third molar extraction is a commonly performed procedure and is recognized as a relatively frequent cause of inferior alveolar nerve (IAN) injury. The aim of the present study was to investigate the specific risk factors for neurosensory deficits, including age, gender, impaction depth, angulation of the third molar, and various radiographic superimposition signs. In a case-control study of patients who had undergone mandibular third molar extraction, a case group was developed of patients showing neurosensory deficits of the IAN, and a control group was formed of randomly selected patients without any neurosensory symptoms. Bivariate analyses were performed to assess the relationship between each variable and IAN injury. A multivariate logistic regression model was used to compute the odds ratios, P values, and predictive values of the radiographic superimposition signs. Of 12,842 total patients, the study group included 104 cases and 135 controls. The results indicated that older age and deeper impaction status were significant risk factors (P < .05). Darkening of the roots, deflection of the roots, narrowing of the roots, dark and bifid apexes of the roots, and narrowing of the canal were also significant risk factors. The positive predictive values ranged from 0.7% to 6.9% and the negative predictive values from 99% to 100%, with adjustment for the definitive prevalence of IAN injury (0.81%, 104/12,842 patients). However, the relatively low positive predictive value renders questionable the predictability of superimposition signs on orthopantomography. In the absence of specific radiographic signs, the risk of neurosensory deficit of the IAN could be negligible. The sensory symptoms disappeared after 6 months in 92.3% of the patients and 98.1% showed recovery after 1 year. The results of the present study have demonstrated a significant association between several risk factors and neurosensory deficits of the IAN after third molar extraction. With a case group of 104 patients, the number of subjects was significantly greater than that in previous studies, increasing the reliability of these results. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Predictive Value of Dental Maturity for a Positive Gonadotropin-Releasing Hormone Stimulation Test Result in Girls with Precocious Puberty

PubMed Central

2017-01-01

Dental maturity is associated with skeletal maturity, which is advanced in girls with central precocious puberty (CPP). We investigated the performance of dental maturity as a screening method for CPP using mandibular second premolar and molar calcification stages, assessed the associated anthropometric and laboratory factors, and evaluated pubertal response predictors using the gonadotropin-releasing hormone stimulation test (GnRHST) in prepubertal and pubertal girls. A prospective case-control study was conducted in girls, aged 7.0–8.9 years, classified into pubertal (peak luteinizing hormone [LH] after GnRHST ≥ 5 IU/L), prepubertal (peak LH < 5 IU/L), and control groups. Auxological and biochemical tests, panoramic radiographs, and GnRHSTs in participants with breast development were conducted. Dental maturity was assessed using the Demirjian index (DI). We included 103 girls (pubertal, 40; prepubertal, 19; control, 44). Chronological age (CA) was not significantly different between groups. Bone age (BA) and BA advancement was higher in the pubertal and prepubertal groups. Increased DI values at the mandibular second premolar and molar were significantly associated with CA, BA, BA advancement, height standard deviation score (SDS), peak LH after GnRHST, and insulin-like growth factor-I (IGF-I) (all P < 0.05). Moreover, odds ratio (OR) of the mandibular second premolar and molar (a DI value of ≥ E) for predicting a positive response to GnRHST was 8.7 (95% confidence intervals [CI], 2.9–26.1) and 5.2 (95% CI, 2.2–12.7), respectively. Dental maturity was a strong predictor for diagnosing CPP. Determining dental maturity in girls with suspected precocious puberty might help determine the performance of GnRHSTs. PMID:28049241

Predictive Value of Dental Maturity for a Positive Gonadotropin-Releasing Hormone Stimulation Test Result in Girls with Precocious Puberty.

PubMed

Baik, Jee Seon; Choi, Jin Woo; Kim, Su Jin; Kim, Ji Hyun; Kim, Sollip; Kim, Jae Hyun

2017-02-01

Dental maturity is associated with skeletal maturity, which is advanced in girls with central precocious puberty (CPP). We investigated the performance of dental maturity as a screening method for CPP using mandibular second premolar and molar calcification stages, assessed the associated anthropometric and laboratory factors, and evaluated pubertal response predictors using the gonadotropin-releasing hormone stimulation test (GnRHST) in prepubertal and pubertal girls. A prospective case-control study was conducted in girls, aged 7.0-8.9 years, classified into pubertal (peak luteinizing hormone [LH] after GnRHST ≥ 5 IU/L), prepubertal (peak LH < 5 IU/L), and control groups. Auxological and biochemical tests, panoramic radiographs, and GnRHSTs in participants with breast development were conducted. Dental maturity was assessed using the Demirjian index (DI). We included 103 girls (pubertal, 40; prepubertal, 19; control, 44). Chronological age (CA) was not significantly different between groups. Bone age (BA) and BA advancement was higher in the pubertal and prepubertal groups. Increased DI values at the mandibular second premolar and molar were significantly associated with CA, BA, BA advancement, height standard deviation score (SDS), peak LH after GnRHST, and insulin-like growth factor-I (IGF-I) (all P < 0.05). Moreover, odds ratio (OR) of the mandibular second premolar and molar (a DI value of ≥ E) for predicting a positive response to GnRHST was 8.7 (95% confidence intervals [CI], 2.9-26.1) and 5.2 (95% CI, 2.2-12.7), respectively. Dental maturity was a strong predictor for diagnosing CPP. Determining dental maturity in girls with suspected precocious puberty might help determine the performance of GnRHSTs.

Four impacted fourth molars in a young patient: a case report

PubMed Central

CLEMENTINI, M.; OTTRIA, L.; PANDOLFI, C.; AGRESTINI, C.; BARLATTANI, A.

2013-01-01

Summary The occurrence of supernumerary teeth is a relatively uncommon dental anomaly and it’s rare for patients to have impacted fourth molars in all quadrant. Aim of this work is to describe the presence of bilateral fourth molars in the maxilla and the mandible in a young male patient aged 22 years came to our hospital with acute pericoronal infection around unerupted third inferior molars. Routine radiographic examination revealed impacted inferior third molars but also unerupted bilateral upper and inferior fourth molars. The acute infection was treated by local measures and the patient was subsequently admitted for removal of third and fourth impacted upper and lower molars under general anesthesia. PMID:23741604

A Prospective Study of Clinical Outcomes Related to Third Molar Removal or Retention

PubMed Central

Cunha-Cruz, Joana; Rothen, Marilynn; Spiekerman, Charles; Drangsholt, Mark; Anderson, Loren; Roset, Gayle A.

2014-01-01

Objectives. We investigated outcomes of third molar removal or retention in adolescents and young adults. Methods. We recruited patients aged 16 to 22 years from a dental practice–based research network in the Pacific Northwest from May 2009 through September 2010 who had at least 1 third molar present and had never undergone third molar removal. Data were acquired via questionnaire and clinical examination at baseline, periodic online questionnaires, and clinical examination at 24 months. Results. A total of 801 patients participated. Among patients undergoing third molar removal, rates of paresthesia and jaw joint symptoms lasting more than 1 month were 6.3 and 34.3 per 100 person-years, respectively. Among patients not undergoing removal, corresponding rates were 0.7 and 8.8. Periodontal attachment loss at distal sites of second molars did not significantly differ by third molar removal status. Incident caries at the distal surfaces of second molars occurred in fewer than 1% of all sites. Conclusions. Rates of paresthesia and temporomandibular joint disorder were higher after third molar removal. Periodontal attachment loss and incident caries at the distal sites of second molars were not affected by extraction status. PMID:24524521

Forensic age estimation based on magnetic resonance imaging of third molars: converting 2D staging into 3D staging.

PubMed

De Tobel, Jannick; Hillewig, Elke; Verstraete, Koenraad

2017-03-01

Established methods to stage development of third molars for forensic age estimation are based on the evaluation of radiographs, which show a 2D projection. It has not been investigated whether these methods require any adjustments in order to apply them to stage third molars on magnetic resonance imaging (MRI), which shows 3D information. To prospectively study root stage assessment of third molars in age estimation using 3 Tesla MRI and to compare this with panoramic radiographs, in order to provide considerations for converting 2D staging into 3D staging and to determine the decisive root. All third molars were evaluated in 52 healthy participants aged 14-26 years using MRI in three planes. Three staging methods were investigated by two observers. In sixteen of the participants, MRI findings were compared with findings on panoramic radiographs. Decisive roots were palatal in upper third molars and distal in lower third molars. Fifty-seven per cent of upper third molars were not assessable on the radiograph, while 96.9% were on MRI. Upper third molars were more difficult to evaluate on radiographs than on MRI (p < .001). Lower third molars were equally assessable on both imaging techniques (93.8% MRI, 98.4% radiograph), with no difference in level of difficulty (p = .375). Inter- and intra-observer agreement for evaluation was higher in MRI than in radiographs. In both imaging techniques lower third molars showed greater inter- and intra-observer agreement compared to upper third molars. MR images in the sagittal plane proved to be essential for staging. In age estimation, 3T MRI of third molars could be valuable. Some considerations are, however, necessary to transfer known staging methods to this 3D technique.

Age estimation using development of third molars in South Indian population: A radiological study.

PubMed

Priyadharshini, K Indra; Idiculla, Jose Joy; Sivapathasundaram, B; Mohanbabu, V; Augustine, Dominic; Patil, Shankargouda

2015-05-01

To assess the estimation of chronological age based on the stages of third molar development following the eight stages (A-H) method of Demirjian et al. in Chennai population of South India. A sample consisting of 848 individuals (471 males and 377 females) aged between 14 and 30 years was randomly selected for the clinical evaluation and 323 orthopantomograms with clinically missing third molars were taken for radiological evaluation using Demirjian's method from a Chennai population of known chronological age and sex. Statistical analysis was performed using Pearson's Chi-square test and mean values were compared between the study groups using t-test or analysis of variance (ANOVA) followed by Tukey's highly significant difference (HSD). In the present study, P < 0.05 was considered as the level of significance. The results showed that the mean age of having clinically completely erupted maxillary third molars was 22.41 years in male subjects and 23.81 years in female subjects and that of mandibular third molars was 21.49 years in male subjects and 23.34 years in female subjects. Mandibular third molars were clinically missing more often in females than in males. Eruption of mandibular third molars was generally ahead of the emergence of maxillary third molars into the oral cavity. Third molar development between male and female subjects showed statistically significant differences at calcification stage F and stage G in maxillary third molars and stage F in mandibular third molars (P < 0.05). There are differences indicating that maxillary and mandibular third molar eruption reached Demirjian's formation stages earlier in males than in females. It is suggested that in future studies, to increase the accuracy of age determination, indications of sexual maturity and ossification should also be evaluated in addition to third molar mineralization.

Radiographic assessment of third molars development and it's relation to dental and chronological age in an Iranian population

PubMed Central

Monirifard, Mohamad; Yaraghi, Navid; Vali, Ava; Vali, Asana; Vali, Amrita

2015-01-01

Background: The aim of the present study was to estimate chronological age based on third molar development and to determine the association between dental age and third molar calcification stages. Materials and Methods: In this cross-sectional study, 505 digital panoramic radiographs of 223 males (44.2%) and 282 females (55.8%) between the age of 6 and 17 were selected from patients who were treated in Departments of Pediatrics and Orthodontics of Isfahan University of Medical Sciences between the years of 2009 and 2013. Correlation between chronological age and third molar development was analyzed with SPSS 21 using Spearman's Rank correlation coefficient, Chi-square test and multiple regression statistical tests (P < 0.05). Results: All third molars demonstrated a highly significant correlation with dental age (P < 0.001). The teeth showing the highest relationship with dental age were mandibular left third molar in males and mandibular right third molar in females (rs = 0.072). When multiple regression was used to predict dental age based on molar calcification stage, the only significant correlation was between maxillary left third molar in males (P < 0.05). There was no statistically significant correlation for any of third molars in females. Relationship between chronological age and molars development stage was significant in all age subgroups and in both gender (P < 0.001). Conclusion: Strong correlation was observed between left third molars and dental age in males. Results showed that third molar calcification stage can be used as an age predictor and in general mandibular teeth seems to be more reliable for this purpose in both genders and in all ages. PMID:25709677

Stresses around a miniscrew. 3-D analysis with the finite element method (FEM).

PubMed

Geramy, Allahyar

2009-11-01

Miniscrews used for absolute anchorage may induce stresses in the surrounding tissues that are dependent on their proximity to the miniscrew. To determine the stresses in the buccal walls of the sockets of lower molars adjacent to a miniscrew under load when the position and angulation of the miniscrew are changed. Five 3-D FEM models containing the first and second lower molars, their periodontal ligaments and the surrounding spongy and cortical bone, were modelled in SolidWorks 2006 (SolidWorks, Concord, MA, USA) and transferred to the ANSYS Workbench (ANSYS Inc., Southpointe, Canonsburg, PA, U.S.A.). A tensile force of 2 N, decomposed in 3-D space, was applied to a miniscrew inserted between the lower first and second molars. The von Mises (equivalent) stresses along the buccal walls of the sockets of the first and second molars were derived following changes in miniscrew position and angulation. No direct force was applied to the molars. When the miniscrew was inserted at right angles to the bone and midway between the molars the stress in the crestal area was 0.093 MPa. This stress increased proportionally in the first molar socket as the miniscrew was moved towards the first molar and declined when the miniscrew was tipped towards the second molar. Stresses also decreased in the crestal area of the second molar as the miniscrew was moved towards the first molar, but increased when it was tipped towards the second molar. A 30-55 per cent increase in crestal stress in the first molar socket was detected. Stress occurred in the tissues surrounding a miniscrew subjected to a force vector. Changes in the position or angulation of a miniscrew can affect the stress in the socket walls of adjacent teeth.

Effects of clodronate on early alveolar bone remodeling and root resorption related to orthodontic forces: a histomorphometric analysis.

PubMed

Choi, Josefina; Baek, Seung-Hak; Lee, Jae-Il; Chang, Young-Il

2010-11-01

The objective of this study was to evaluate the short-term effects of clodronate, a first-generation bisphosphonate, on early alveolar bone remodeling and root resorption related to orthodontic tooth movement. The samples consisted of 54 sex-matched Wistar rats (weight, 180-230 g) allocated to the 2.5 mmol/L clodronate, 10 mmol/L clodronate, and control groups (n = 18 for each group). After application of a nickel-titanium closed-coil spring (force, 60 g) between the maxillary central incisor and first molar, 2.5 mmol/L of clodronate, 10 mmol/L of clodronate, or saline solution was injected into the subperiosteum adjacent to the maxillary first molar every third day. All animals received tetracycline, calcein, and alizarin red by intraperitoneal injection at 1, 6, and 14 days, respectively. The amounts of tooth movement were measured at 3, 6, 9, 12, and 15 days. The animals were killed at 4, 7, and 17 days. Histomorphometric analyses of bone mineral appositional rate, labeled surface, percentage of root resorption area, and number of root resorption lacunae of the mesiobuccal root of the maxillary first molar at 4, 7, and 17 days were done. One-way analysis of variance (ANOVA) with the post-hoc test were done for statistical analyses. Rats in the 10 mmol/L clodronate group had significant decreases of tooth movement (12 and 15 days, P <0.05) and percentages of root resorption area and numbers of root resorption lacunae (7 day, P <0.05), and increases of labeled surface and mineral appositional rates (17 day, P <0.05) over those of the 2.5 mmol/L clodronate and control groups. Although clodronate might decrease root resorption related to orthodontic tooth movement, patients should be informed about a possible decrease in the amount of tooth movement and a prolonged period of orthodontic treatment. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Synthesis, spectral and antimicrobial activity of Zn(II) complexes with Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and benzaldehyde/2-hydroxyacetophenone/indoline-2,3-dione

NASA Astrophysics Data System (ADS)

Singh, Ajay K.; Pandey, O. P.; Sengupta, S. K.

2013-09-01

Zn(II) complexes have been synthesized by reacting zinc acetate with Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and 2-hydroxyacetophenone/benzaldehyde/indoline-2,3-dione. All these complexes are soluble in DMF and DMSO; low molar conductance values indicate that they are non electrolytes. Elemental analyses suggest that the complexes have 1:2 metal to ligands stoichiometry of the types [ZnL2(H2O)2](L = monoanionic Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and 2-hydroxyacetophenone/indoline-2,3-dione) [ZnL2‧(OOCCH3)2(H2O)2](L‧ = neutral Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and benzaldehyde), and they were characterized by IR, 1H NMR, and 13C NMR. Particle sizes of synthesized compounds were measured with dynamic light scattering (DLS) analyser which indicates that particle diameter are of the range ca. 100-200 nm. All these Schiff bases and their complexes have also been screened for their antibacterial (Bacillus subtilis (B. subtilis), Escherichia coli (E. coli) and antifungal activities (Colletotrichum falcatum (C. falcatum), Aspergillus niger (A. niger), Fusarium oxysporium (F. oxysporium) Curvularia pallescence (C. pallescence). The antimicrobial activities have shown that upon complexation the activity increases.

Synthesis and Spectral Characterization of Antifungal Sensitive Schiff Base Transition Metal Complexes

PubMed Central

Sakthivel, A.; Rajasekaran, K.

2007-01-01

New N2O2 donor type Schiff base has been designed and synthesized by condensing acetoacetanilido-4-aminoantipyrine with 2-aminobenzoic acid in ethanol. Solid metal complexes of the Schiff base with Cu(II), Ni(II), Co(II), Mn(II), Zn(II), VO(IV), Hg(II) and Cd(II) metal ions were synthesized and characterized by elemental analyses, magnetic susceptibility, molar conduction, fast atom bombardment (FAB) mass, IR, UV-Vis, and 1H NMR spectral studies. The data show that the complexes have the composition of ML type. The UV-Vis. and magnetic susceptibility data of the complexes suggest a square-planar geometry around the central metal ion except VO(IV) complex which has square-pyramidal geometry. The in vitro antifungal activities of the compounds were tested against fungi such as Aspergillus niger, Aspergillus flavus, Rhizopus stolonifer, Candida albicans, Rhizoctonia bataicola and Trichoderma harizanum. All the metal complexes showed stronger antifungal activities than the free ligand. The minimum inhibitory concentrations (MIC) of the metal complexes were found in the range of 10~31 µg/ml. PMID:24015086

Antimicrobial, spectral, magnetic and thermal studies of Cu(II), Ni(II), Co(II), UO(2)(VI) and Fe(III) complexes of the Schiff base derived from oxalylhydrazide.

PubMed

Melha, Khlood Abou

2008-04-01

The Schiff base ligand, oxalyl [( 2 - hydroxybenzylidene) hydrazone] [corrected].H(2)L, and its Cu(II), Ni(II), Co(II), UO(2)(VI) and Fe(III) complexes were prepared and tested as antibacterial agents. The Schiff base acts as a dibasic tetra- or hexadentate ligand with metal cations in molar ratio 1:1 or 2:1 (M:L) to yield either mono- or binuclear complexes, respectively. The ligand and its metal complexes were characterized by elemental analyses, IR, (1)H NMR, Mass, and UV-Visible spectra and the magnetic moments and electrical conductance of the complexes were also determined. For binuclear complexes, the magnetic moments are quite low compared to the calculated value for two metal ions complexes and this shows antiferromagnetic interactions between the two adjacent metal ions. The ligand and its metal complexes were tested against a Gram + ve bacteria (Staphylococcus aureus), a Gram -ve bacteria (Escherichia coli), and a fungi (Candida albicans). The tested compounds exhibited high antibacterial activities.

Efficiency of a pendulum appliance for molar distalization related to second and third molar eruption stage.

PubMed

Kinzinger, Gero S M; Fritz, Ulrike B; Sander, Franz-Günter; Diedrich, Peter R

2004-01-01

A modified pendulum appliance, including a distal screw and special preactivated pendulum springs (built-in straightening activation and toe-in bending), was used for bilateral maxillary molar distalization in 36 adolescent patients in various stages of the molar dentition. The patients were divided into 3 groups (PG 1-3) according to the stage of eruption of their second and third molars. In PG 1 (18 patients), eruption of the second molars had either not yet taken place or was not complete. In PG 2 (15 patients), the second molars had already developed as far as the occlusal plane, with the third molars at the budding stage. In PG 3 (3 patients), germectomy of the wisdom teeth had been carried out, and the first and second molars on both sides had completely erupted. Analysis of cephalograms to identify any changes in the sagittal plane showed that, in the direction of distalization, a tooth bud acts on the mesial neighboring tooth like a fulcrum, and that tipping of the first molars in patients in whom the second molar was still at the budding stage was thus greater. In patients whose second molars had erupted completely, the degree of tipping was greater again when a third molar bud was located in the direction of movement. After previously completed germectomy of the wisdom teeth, almost exclusively bodily distalization of both molars is possible, even without bands being applied to the second molars. However, if the first and second molars are distalized simultaneously with a pendulum appliance, the duration of therapy will be longer, greater forces will have to be applied, and more anchorage will be lost. Statistical analysis of the results of dental-angular measurements showed significant differences in the degree of molar tipping and reciprocal incisor protrusion. The degree of distal tipping of first molars was less in patients with erupted second molars (PG 2 and PG 3) than in those whose second molars were not yet erupted (PG 1). For instance, the measured angles were 0.9 degrees +/- 3.43 degrees (to the palatal plane) and 0.8 degrees +/- 3.4 degrees (to the anterior cranium floor) in PG 2, and -0.33 degrees +/- 0.58 degrees and 0.67 degrees +/- 2.08 degrees, respectively, in PG 3, contrasting with respective values of 5.89 degrees +/- 3.74 degrees and 5.36 degrees +/- 3.49 degrees in PG 1. Tipping of erupted second molars was much more marked in PG 2 (7.92 degrees +/- 5.83 degrees to the palatal plane and 7.55 degrees +/- 5.28 degrees to the anterior cranium floor), but much less pronounced in PG 3 (2 degrees +/- 1.73 degrees to the palatal plane and 2 degrees +/- 2 degrees to the anterior cranium floor) than the corresponding movement of the second budding-stage molars in PG 1 (4.06 degrees +/- 2.15 degrees and 3.97 degrees +/- 2.27 degrees, respectively). The degree of incisor protrusion occurring reciprocally with molar distalization was much less in these patients (measured angles of 3.28 degrees +/- 1.97 degrees and 2.89 degrees +/- 2.17 degrees to the palatal plane and anterior cranium floor, respectively) than in the patients presenting different stages of the dentition (angles of 5.5 degrees +/- 3.33 degrees and 6.03 degrees +/- 4.29 degrees, respectively, in PG 2, and angles of 5.5 degrees +/- 3.28 degrees and 6.67 degrees +/- 3.09 degrees, respectively, in PG 3). Moreover, measurement of dental casts in the horizontal plane showed not only the targeted mesiobuccal rotation of both maxillary molars, but also a vestibular drift of the unbanded second molars.

Uranium-series disequilibrium data for tooth fragments from the fossil hominid site at Ternifine, Algeria.

USGS Publications Warehouse

Szabo, B. J.

1982-01-01

I report here analyses of elephant molar-tooth fragments that were submitted by the late K.P.Oakley for uranium-series dating. The tooth fragments were collected by the late C. Arambourg from Pleistocene sand in association with the hominid fossils of Ternifine Man, Algeria. Of the results reported the minimum age of over 360 000 yr BP for the enamel appears to be the most reliable. -Authors

Factors affecting direction and strength of patient preferences for treatment of molar teeth with nonvital pulps.

PubMed

Vernazza, C R; Steele, J G; Whitworth, J M; Wildman, J R; Donaldson, C

2015-12-01

To elicit the factors affecting willingness to pay (WTP) values for the preferred options of participants for dealing with a molar tooth with a nonvital pulp, a common but difficult problem. A total of 503 patients were recruited from dental practices in the North East of England and interviewed. Their preferred treatment option for a molar tooth with a nonvital pulp (endodontics, extraction and various prosthetic restorative options) and WTP for this preferred option were elicited. Factors affecting preferred option and WTP were analysed using econometric modelling. Overall, 53% of the sample wished to save the tooth with a mean WTP of £373. The variance in WTP was high. Of those opting for extraction, the majority chose to leave a gap or have an implant. The preferred option was influenced by previous treatment experience. WTP was only influenced by having a low income. The high level of variance in WTP and its relatively unpredictable nature pose difficult questions for policy makers trying to ensure the delivery of an equitable service. For dentists, it is important not to make assumptions about patient preference and strength of preference when making decisions. Ideally, WTP values should be considered alongside effectiveness data, and those on costs, in policy making. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Modeling methylene blue aggregation in acidic solution to the limits of factor analysis.

PubMed

Golz, Emily K; Vander Griend, Douglas A

2013-01-15

Methylene blue (MB(+)), a common cationic thiazine dye, aggregates in acidic solutions. Absorbance data for equilibrated solutions of the chloride salt were analyzed over a concentration range of 1.0 × 10(-3) to 2.6 × 10(-5) M, in both 0.1 M HCl and 0.1 M HNO(3). Factor analyses of the raw absorbance data sets (categorically a better choice than effective absorbance) definitively show there are at least three distinct molecular absorbers regardless of acid type. A model with monomer, dimer, and trimer works well, but extensive testing has resulted in several other good models, some with higher order aggregates and some with chloride anions. Good models were frequently indistinguishable from each other by quality of fit or reasonability of molar absorptivity curves. The modeling of simulated data sets demonstrates the cases and degrees to which signal noise in the original data obscure the true model. In particular, the more mathematically similar (less orthogonal) the molar absorptivity curves of the chemical species in a model are, the less signal noise it takes to obscure the true model from other potentially good models. Unfortunately, the molar absorptivity curves in dye aggregation systems like that of methylene blue tend to be sufficiently similar so as to lead to the obscuration of models even at the noise levels (0.0001 ABS) of typical benchtop spectrophotometers.

Incomplete caries removal and indirect pulp capping in primary molars: a randomized controlled trial.

PubMed

Bressani, Ana Eliza Lemes; Mariath, Adriela Azevedo Souza; Haas, Alex Nogueira; Garcia-Godoy, Franklin; de Araujo, Fernando Borba

2013-08-01

To compare the effect of incomplete caries removal (ICR) and indirect pulp capping (IPC) with calcium hydroxide (CH) or an inert material (wax) on color, consistency and contamination of the remaining dentin of primary molars. This double-blind, parallel-design, randomized controlled trial included 30 children presenting one primary molar with deep caries lesion. Children were randomly assigned after ICR to receive IPC with CH or wax. All teeth were then restored with resin composite. Baseline dentin color and consistency were evaluated after ICR, and dentin samples were collected for contamination analyses using scanning electron microscopy. After 3 months, restorations were removed and the three parameters were re-evaluated. In both groups, dentin became significantly darker after 3 months. No cases of yellow dentin were observed after 3 months with CH compared to 33.3% of the wax cases (P < 0.05). A statistically significant difference over time was observed only for CH regarding consistency. CH stimulated a dentin hardening process in a statistically higher number of cases than wax (86.7% vs. 33.3%; P = 0.008). Contamination changed significantly over time in CH and wax without significant difference between groups. It was concluded that CH and wax arrested the carious process of the remaining carious dentin after indirect pulp capping, but CH showed superior dentin color and consistency after 3 months.

Synthesis and characterization of lead sulphide thin films from ethanolamine (ETA) complexing agent chemical bath

NASA Astrophysics Data System (ADS)

Gashaw Hone, Fekadu; Dejene, F. B.

2018-02-01

Polycrystalline lead sulphide (PbS) thin films were grown on glass substrates by chemical bath deposition route using ethanolamine (ETA) as a complexing agent. The effects of ETA molar concentration on the structural, morphological, electrical and optical properties of lead sulphide thin films were thoroughly studied. The XRD analyses revealed that all the deposited thin films were face center cubic crystal structure and their preferred orientations were varied along the (111) and (200) planes. The XRD results further confirmed that ETA concentration had a significant effects on the strain, average crystalline size and dislocation density of the deposited thin films. The SEM studies illustrated the evolution and transformation of surface morphology as ETA molar concentration increased from 0.41 M to 1.64 M. The energy dispersive x-ray analysis was used to verify the compositional elements of the deposited thin films. Optical spectroscopy investigation established that the band gap of the PbS thin films were reduced from 0.98 eV to 0.68 eV as ETA concentration increased. The photoluminescence spectra showed a well defined peak at 428 nm and shoulder around 468 nm for all PbS thin films. The electrical resistivity of the thin films found in the order of 103 Ω cm at room temperature and decreased as the ETA molar concentration was increased.

Infant Breast-feeding and Childhood Caries: A Nine-year Study

PubMed Central

Hong, Liang; Levy, Steven M.; Warren, John J.; Broffitt, Barbara

2017-01-01

Purpose This study’s purpose was to assess the association between infant breast-feeding and caries experience of primary second molars in a nine-year longitudinal cohort study. Methods Study sample was 509 subjects recruited at birth. Information about breast-feeding duration and other factors was collected through parents’ responses to periodic questionnaires. Primary teeth were examined for dental caries at five years old and nine years old by calibrated dentist examiners. Caries experience (yes/no) and number of decayed and/or filled surfaces (dfs) were determined for five- and nine-year-olds. Results For primary second molars at five years old, 18 percent of children who were breast-fed less than six months had caries (mean dfs=0.55) while only 9 percent of children who were breast-fed at least six months had caries (mean dfs=0.33). From five to nine years old, caries incidence was 32 percent and 31 percent, respectively, for children breast-fed less than six months and at least six months. In multivariable regression analyses, shorter breast-feeding duration was positively associated with caries experience of primary second molars at five years old (P=.005), both before and after controlling for other important factors. Conclusions Shorter duration of breast-feeding is suggested to be associated with increased risk for early childhood caries, but its impact might diminish with age. PMID:25198001

An in vitro morphological investigation of the endodontic spaces of third molars.

PubMed

Cosić, Jozo; Galić, Nada; Vodanović, Marin; Njemirovskij, Vera; Segović, Sanja; Pavelić, Bozidar; Anić, Ivica

2013-06-01

Aim of this paper was to investigate the particular anatomic features of the endodontic space of third molars in the general population of Croatia. A total of 106 fully developed third molars (56 maxillar and 50 mandibular) has been analyzed. The respective number of roots and of root canals, the structure of the roots, and the curvature and absolute length of the root-canals were analyzed. In most cases, upper third molars had three roots (83.9%), while most of the lower molars were single rooted (56.0%). Upper third molars had mostly three root canals (75.1%), lower third molars two (90.0%). In both jaws, most third molars had curved canals (60.7% in the upper and 84.0% in the lower jaw). 12.5% of upper third molars had lateral and accessory canals, whereas only 4.0% of the lower third molars were found to have them. The Student t-test showed statistically significant differences (p < 0.05) in the length of the root-canals, mesiobuccal and distobuccal canals being significantly shorter than palatinal canals. The same test showed that in the lower third molars the mesial root canals were significantly longer that the distal ones, although slightly. The results obtained are in compliance with similar results by other authors; however, they tend to show some specific population-related features.

Prevalence of third molars and pathological changes related to them in dental medicine.

PubMed

Mikić, Ivana Medvedec; Zore, Irina Filipović; Crcić, Vlatka Fuchs; Matijević, Jurica; Plancak, Dario; Katunarić, Marina; Buković, Dino

2013-09-01

The purpose of this study was to determine the prevalence of third molars in terms of respondents' age. Furthermore it was desired to determine the extent of the manifestation of pathological changes, such as caries, apical lesions, and alveolar bone resorption. This study was based on 500 OPGs of patients from the Faculty of Dentistry, University of Zagreb. Patients were divided into seven age groups. The total number of molars, the number of cavities on remaining molars, the quality of endodontic treatment and the evaluation of their performance and presence of periapical lesions was analyzed. As apart of the periodontal status, the number of inadequate fillings, the number of damaged furcations and bone resorption was analyzed. The statistical analysis was performed by means of STATISTICA 7 statistical package (StatSoft, Tulsa, USA). The correlation between the total number of molars and the age of patients was analyzed by means of Spearman's correlation to the level of significance of 0.05. The number of first, second and third molars significantly decreased in higher age groups. The prevalence of caries in third molars as compared to first and second molars was generally lower, third molars were endodontic treated at least. Assessment of involved furcations showed that the lowest percentage of 8% was found in third molars. The majority of all remaining molars had bone resorption of 1-3 mm.

Retrospective study of root canal configurations of maxillary third molars in Central India population using cone beam computed tomography Part- I.

PubMed

Rawtiya, Manjusha; Somasundaram, Pavithra; Wadhwani, Shefali; Munuga, Swapna; Agarwal, Manish; Sethi, Priyank

2016-01-01

The aim of this study was to investigate the root and canal morphology of maxillary third molars in Central India population using cone-beam computed tomography (CBCT) analysis. CBCT images of 116 maxillary third molars were observed, and data regarding the number of roots, the number of canals, and Vertucci's Classification in each root was statistically evaluated. Majority of Maxillary third molars had three roots (55.2%) and three canals (37.9%). Most MB root (43.8%), DB root (87.5%), and palatal root (100%) of maxillary third molars had Vertucci Type I. Mesiobuccal root of three-rooted maxillary third molars had Vertucci Type I (43.8%) and Type IV (40.6%) configuration. Overall prevalence of C-shaped canals in maxillary third molars was 3.4%. There was a high prevalence of three-rooted maxillary molars with three canals.

Clinical investigation of second mesiobuccal canals in endodontically treated and retreated maxillary molars.

PubMed

Wolcott, James; Ishley, Dave; Kennedy, Wade; Johnson, Scott; Minnich, Scott

2002-06-01

An examination of 1873 conventionally treated and retreated maxillary first and second molars was made in an attempt to determine the percentage of second mesiobuccal (MB2) canals that could be located routinely and evaluate if there were any significant differences between initial treatments and retreatments. The teeth examined were 1193 first molars and 680 second molars treated consecutively over a 2-yr period by five endodontists. Overall the MB2 canal was found in 724 (61%) first molars and 245 (36%) second molars. The incidence of a MB2 canal in first molar retreatments was 67% compared to a 59% incidence in initial treatments. Whereas in second molars, the retreatment incidence was 44% compared with 35% in initial treatments. The significant difference in the incidence of a MB2 canal between initial treatments and retreatments suggests that failure to find and treat existing MB2 canals will decrease the long-term prognosis.

A 5 yr clinical investigation of second mesiobuccal canals in endodontically treated and retreated maxillary molars.

PubMed

Wolcott, James; Ishley, Dave; Kennedy, Wade; Johnson, Scott; Minnich, Scott; Meyers, John

2005-04-01

An examination of 5616 endodontically treated and retreated maxillary first and second molars was made in an attempt to determine the percentage of MB2 canals that could be located routinely, and evaluate if there were any significant differences between initial treatments and retreatments. The teeth examined were 3578 first molars and 2038 second molars treated consecutively over a 5-yr period by six endodontists. Overall the MB2 canal was found in 2133 (60%) first molars, and 712 (35%) second molars. The incidence of a MB2 canal in first molar retreatments was 66% compared to a 58% incidence in initial treatments. Whereas in second molars the retreatment incidence was 40% compared to 34% in initial treatments. The significant difference in the incidence of a MB2 canal between initial treatments and retreatments suggests that failure to find and treat existing MB2 canals will decrease the long-term prognosis.

Rare Occurrence of the Left Maxillary Horizontal Third Molar Impaction, the Right Maxillary Third Molar Vertical Impaction and the Left Mandibular Third Molar Vertical Impaction with Inferior Alveolar Nerve Proximity in a 30 Year Old Female: A Case Report.

PubMed

Shunmugavelu, Karthik

2017-01-01

A combination of horizontal and vertical third molar impaction is a rare occurrence.When the tooth is unable to erupt to its proper position and fail to achieve a normal occlusion, it is known as impacted tooth. In this scientific article, case report of a female patient aged 30 years reported with acombination of horizontally and vertically impacted third molars in the maxilla and mandible has been presented. The treatment included surgical removal of the impacted teeth without any damage to underlying structures. Horizontal impaction of left maxillary third molar, vertical impaction of right maxillary third molar and left mandibular third molar is a rare occurrence. If symptomatic, surgical removal has to be planned as earlier as possible rather than late complications.

Psychometric Evaluation of the Tagalog and German Subjective Happiness Scales and a Cross-Cultural Comparison

ERIC Educational Resources Information Center

Swami, Viren; Stieger, Stefan; Voracek, Martin; Dressler, Stefan G.; Eisma, Laura; Furnham, Adrian

2009-01-01

The Subjective Happiness Scale (SHS) has recently been developed as a more complete measure for the assessment of molar subjective happiness. In the present study, we report on the translation and validation of German and Tagalog versions of the SHS and conduct an initial cross-cultural examination of subjective happiness. In Study 1, 960…

78 FR 25469 - Notice of Inventory Completion: University of South Alabama Center for Archaeological Studies...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-01

... represent, at minimum, two individuals, consisting of 9 molars, 2 molar fragments, 8 pre-molars, 4 canines..., three individuals, consisting of 16 molars, 10 premolars, 9 incisors, 7 canines, 61 unidentifiable tooth...

Root canal configurations of third molar teeth. A comparison with first and second molars in the Turkish population.

PubMed

Sert, Semih; Sahinkesen, Güneş; Topçu, Fulya T; Eroğlu, Seyda E; Oktay, Elif A

2011-12-01

The purpose of the current study was to determine the similarities of maxillary and mandibular third molars with the other molar teeth. A total of 2016 extracted maxillary and mandibular permanent teeth were evaluated. The teeth were divided into six groups. The teeth were stored in 5% nitric acid solution for 7 days, then placed in increasing concentrations of ethyl alcohol. The teeth were rendered transparent by immersion in xylene solution for 4 days until complete transparency was achieved. Three roots were present in 93.0% of the maxillary molars, and 91.3% of the second molars. Among the maxillary third molars, 35.5% were single-rooted and 24.9% of the mandibular third molars had single roots. Double roots were present in 69.2% of the mandibular third molars, and 5.4% had three roots. Four new root canal configurations were encountered in this study. The root canal configurations of the mandibular and maxillary teeth showed similarities with the results of other studies performed in different populations. © 2010 The Authors. Australian Endodontic Journal © 2010 Australian Society of Endodontology.

[Clinical analysis of caries status of the mandibular second molar].

PubMed

You, Chun-an; Zheng, Ping; Hu, Ning; Su, Qin

2014-04-01

To collect the cases which have caries on the mandibular second molar and analyze the caries status and correlative factors. Patients treated in the Department of Endodontics in West China Hospital of Stomatology were randomly collected. The baseline information, primary sites and severity of dental caries on the mandibular second molar, and eruption pattern of the mandibular third molar were recorded. The data was analyzed with SPSS13.0 software package. Four hundred eighty-one patients including 227 males and 254 females were collected. Caries on the mandibular second molar starting from the occlusal, distal proximal and buccal surfaces accounted for 33.8%, 33.2% and 24.4%, respectively. Caries involving dental pulp (49.7%) were significantly more than deep and shallow to moderate caries (31.7% and 18.6%). Gender was not correlated with the site and severity of caries. However, impacted mandibular third molars and age were significantly related to both caries site and severity. Occlusal and distal proximal surfaces are the most predisposed sites to have caries on mandibular second molar. Impacted mandibular third molar and age are significantly related to caries of mandibular second molar.

Molar axis estimation from computed tomography images.

PubMed

Dongxia Zhang; Yangzhou Gan; Zeyang Xia; Xinwen Zhou; Shoubin Liu; Jing Xiong; Guanglin Li

2016-08-01

Estimation of tooth axis is needed for some clinical dental treatment. Existing methods require to segment the tooth volume from Computed Tomography (CT) images, and then estimate the axis from the tooth volume. However, they may fail during estimating molar axis due to that the tooth segmentation from CT images is challenging and current segmentation methods may get poor segmentation results especially for these molars with angle which will result in the failure of axis estimation. To resolve this problem, this paper proposes a new method for molar axis estimation from CT images. The key innovation point is that: instead of estimating the 3D axis of each molar from the segmented volume, the method estimates the 3D axis from two projection images. The method includes three steps. (1) The 3D images of each molar are projected to two 2D image planes. (2) The molar contour are segmented and the contour's 2D axis are extracted in each 2D projection image. Principal Component Analysis (PCA) and a modified symmetry axis detection algorithm are employed to extract the 2D axis from the segmented molar contour. (3) A 3D molar axis is obtained by combining the two 2D axes. Experimental results verified that the proposed method was effective to estimate the axis of molar from CT images.

Mandibular molar uprighting using mini-implants: different approaches for different clinical cases--two case reports.

PubMed

Derton, Nicola; Perini, Alessandro; Mutinelli, Sabrina; Gracco, Antonio

2012-01-01

To detail two different clinical protocols and case studies using mini-implant anchorage developed to respond to certain clinical conditions. Two clinical protocols are described to upright mesially tilted mandibular molars. In the first protocol, a single mini-implant is inserted distally to the molar to be uprighted, and an elastic traction chain is applied to the tooth. In the second clinical approach, two mini-implants are inserted mesially. A screw-suspended TMA sectional archwire is applied (Derton-Perini technique). Two cases, descriptive of the two different treatment protocols, are described. In the first case, the mandibular right second premolar was missing and the adjacent first molar needed to be uprighted. A single screw was inserted distally to the first molar, and an elastic chain was applied. In the second case, the mandibular left second molar was missing and the third molar needed to be uprighted. Two mini-implants were inserted mesially and a fully screw-supported sectional archwire was used to upright and bodily mesialize the third molar. Both uprighting approaches uprighted the molar axis without loss of anchorage. The two approaches to mandibular molar uprighting, developed as rational responses to different clinical cases, were both found to be effective.

[Orthodontic Management of the Impacted Mandibular Second Molar Tooth].

PubMed

Mah, Michael; Takada, Kenji

2016-09-01

When the mandibular permanent second molar becomes impacted, it is identified as a malocclusion that needs treatment as it often leads to unwanted complications such as caries and periodontitis of the adjacent permanent first molar. Other less common complications include root resorption of the adjacent first molar root or continued root development to be in close proximity to the inferior dental alveolar nerve. This paper seeks to differentiate various levels of severity of impaction and review treatment options that are considered clinically available for the proper management of the impacted mandibular permanent second molar. Treatment options that will be discussed in this article include timing of second molar removal for replacement by the third molar, relief of impaction via second premolar removal, surgical repositioning and the combination of third molar removal, surgical exposure and orthodontic uprighting of the impacted tooth. Depending on the severity of the impaction, most impactions can be easily and predictably corrected with nickel titanium archwires or auxillary open coil springs or uprighting springs. Uncommonly, the mandibular permanent second molar can become severely impacted and in close proximity to the inferior dentoalveolar nerve. In these instances, the use of temporary anchorage devices such as microimplants has shown to be successful in uprighting the severely impacted mandibular permanent second molars. © EDP Sciences, SFODF, 2016.

Volumetric analysis of hand, reciprocating and rotary instrumentation techniques in primary molars using spiral computed tomography: An in vitro comparative study.

PubMed

Jeevanandan, Ganesh; Thomas, Eapen

2018-01-01

This present study was conducted to analyze the volumetric change in the root canal space and instrumentation time between hand files, hand files in reciprocating motion, and three rotary files in primary molars. One hundred primary mandibular molars were randomly allotted to one of the five groups. Instrumentation was done using Group I; nickel-titanium (Ni-Ti) hand file, Group II; Ni-Ti hand files in reciprocating motion, Group III; Race rotary files, Group IV; prodesign pediatric rotary files, and Group V; ProTaper rotary files. The mean volumetric changes were assessed using pre- and post-operative spiral computed tomography scans. Instrumentation time was recorded. Statistical analysis to access intergroup comparison for mean canal volume and instrumentation time was done using Bonferroni-adjusted Mann-Whitney test and Mann-Whitney test, respectively. Intergroup comparison of mean canal volume showed statistically significant difference between Groups II versus IV, Groups III versus V, and Groups IV versus V. Intergroup comparison of mean instrumentation time showed statistically significant difference among all the groups except Groups IV versus V. Among the various instrumentation techniques available, rotary instrumentation is the considered to be the better instrumentation technique for canal preparation in primary teeth.

MOLAR: Modular Linux and Adaptive Runtime Support for HEC OS/R Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frank Mueller

2009-02-05

MOLAR is a multi-institution research effort that concentrates on adaptive, reliable,and efficient operating and runtime system solutions for ultra-scale high-end scientific computing on the next generation of supercomputers. This research addresses the challenges outlined by the FAST-OS - forum to address scalable technology for runtime and operating systems --- and HECRTF --- high-end computing revitalization task force --- activities by providing a modular Linux and adaptable runtime support for high-end computing operating and runtime systems. The MOLAR research has the following goals to address these issues. (1) Create a modular and configurable Linux system that allows customized changes based onmore » the requirements of the applications, runtime systems, and cluster management software. (2) Build runtime systems that leverage the OS modularity and configurability to improve efficiency, reliability, scalability, ease-of-use, and provide support to legacy and promising programming models. (3) Advance computer reliability, availability and serviceability (RAS) management systems to work cooperatively with the OS/R to identify and preemptively resolve system issues. (4) Explore the use of advanced monitoring and adaptation to improve application performance and predictability of system interruptions. The overall goal of the research conducted at NCSU is to develop scalable algorithms for high-availability without single points of failure and without single points of control.« less

Relationship Between the Remaining Dentin Thickness and Coronal Pulp Status of Decayed Primary Molars.

PubMed

Berbari, Roula; Fayyad-Kazan, Hussein; Ezzedine, Mohamad; Fayyad-Kazan, Mohammad; Bandon, Daniel; Sfeir, Elia

2017-01-01

The aim of this study was to assess the correlation between the remaining dentin thickness (RDT) in deep decayed primary molars and the inflammatory status and bacterial composition of the corresponding coronal pulp. We hypothesized that RDT could be used as a reference for clinicians in assigning the indication for pulpotomy. Pulpotomies were conducted on the cameral pulp of 48 primary molars. Microorganisms, such as Lactobacillus sp., Streptococcus sp., and Prevotella sp., were identified and quantified and levels of tumor necrosis factor-alpha (TNF-α) and interlukin-6 (IL-6) were assessed. The correlation between the pre-operative RDT based on radiographic images and inflammatory-microbial profiles in vitro was evaluated using Spearman's rho correlation coefficient. All data analysis was performed using a statistical software program (SPSS 20.0, SPSS Inc., Chicago, IL, USA). Immunological and microbiological studies revealed elevated levels of TNF-α and IL-6 cytokines, and Lactobacillus sp., Streptococcus sp. and Prevotella sp. in the cameral pulp with an RDT measuring up to 1.1 mm. No significant relationship could be established between RDT, inflammatory status and microbial content of the pulps. The RDT remains a key clinical factor that needs to be assessed when establishing the indication for pulpotomy. Additional parameters that can improve this therapy should be investigated in the future.

Molar heat capacity at constant volume of difluoromethane (R32) and pentafluoroethane (R125) from the triple-point temperature to 345 K at pressures to 35 MPa

NASA Astrophysics Data System (ADS)

Lüddecke, T. O.; Magee, J. W.

1996-07-01

Molar heat capacities at constant volume ( C v) of dill uoromethane (R32) and pentalluoroethane (R125) were measured with an adiabatic calorimeter. Temperatures ranged from their triple points to 345 K, and pressures up to 35 MPa. Measurements were conducted on the liquid in equilibrium with its vapor and on compressed liquid samples. The samples were of a high purity, verified by chemical analysis of each fluid. For the samples, calorimetric results were obtained for two-phase ( C {v/(2)}), saturated liquid ( C σ or C' x ), and singlephase ( C v) molar heat capacities. The C σ data were used to estimate vapor pressures for values less than 0.3 MPa by applying a thermodynamic relationship between the saturated liquid heat capacity and the temperature derivatives of the vapor pressure. The triple-point temperature ( T tr) and the enthalpy of fusion (Δfus H) were also measured for each substance. The principal sources of uncertainty are the temperature rise measurement and the change-ofvolume work adjustment. The expanded uncertainty (at the two-sigma level) for C v is estimated to be 0.7%, for C {v/(2)} it is 0.5%, and for C σ it is 0.7%.

Root growth during molar eruption in extant great apes.

PubMed

Kelley, Jay; Dean, Christopher; Ross, Sasha

2009-01-01

While there is gradually accumulating knowledge about molar crown formation and the timing of molar eruption in extant great apes, very little is known about root formation during the eruption process. We measured mandibular first and second molar root lengths in extant great ape osteological specimens that died while either the first or second molars were in the process of erupting. For most specimens, teeth were removed so that root lengths could be measured directly. When this was not possible, roots were measured radiographically. We were particularly interested in the variation in the lengths of first molar roots near the point of gingival emergence, so specimens were divided into early, middle and late phases of eruption based on the number of cusps that showed protein staining, with one or two cusps stained equated with immediate post-gingival emergence. For first molars at this stage, Gorilla has the longest roots, followed by Pongo and Pan. Variation in first molar mesial root lengths at this stage in Gorilla and Pan, which comprise the largest samples, is relatively low and represents no more than a few months of growth in both taxa. Knowledge of root length at first molar emergence permits an assessment of the contribution of root growth toward differences between great apes and humans in the age at first molar emergence. Root growth makes up a greater percentage of the time between birth and first molar emergence in humans than it does in any of the great apes. Copyright (c) 2009 S. Karger AG, Basel.

Expressly fabricated molar tube bases: enhanced adhesion.

PubMed

Sharma, Tarun; Phull, Tarun Singh; Rana, Tarun; Kumar, Varun

2014-06-01

Clinicians, Orthodontists and their patients' parents often expect the best results in the shortest time span possible. Orthodontic bonding of molar tubes has been an acceptable risk in a modern era of refined biomaterials and instrumentation. Although many orthodontists still prefer banding to bonding, it is the failure rate of the tubes on molars which accounts to an impedance in molar bonding. One of the reasons for molar attachment failures is attributed to improper adaptation of the buccal tube base with or without increased thickness of composite. Merits of banding the second molars especially when these are the terminal teeth for anchorage have been overemphasized in the literature. The present article presents a simple and relatively less time consuming technique of preparing molar tubes to be bonded on tooth surfaces which may be quite difficult to isolate especially for bonding, for example, mandibular second molars. The increased surface area of the composite scaffold helps not only in enhanced bond strength but also serves to reduce the incidence of plaque accumulation given the dexterity of invitro preparation. The removal of the occlusal part of the molar tube scaffold helps in prevention of open / raised bite tendencies. The present innovation, therefore, is not merely serendipity but a structured technique to overcome a common dilemma for the clinical orthodontist. The present dictum of banding being superior to molar tube bonding may prove to be futile with trendsetting molar attachments. It is also an established fact that bonding proves to be a lesser expensive modality when compared to banding procedures.

The Relation Between Dermatoglyphics And Mesiodistal Width Of The Deciduous Second Molar And Permanent First Molar

PubMed Central

Kumar, Vinod; Adusumilli, Hamsini; Reddy, KM Parveen; Kumar, NH Praveen

2017-01-01

Introduction Dermatoglyphics is one of the important diagnostic tools used in the recent days for identification of an individual. Dermatoglyphics is the study of type of patterns present on digits, palms and foot. The mesiodistal diameter of the tooth is an important factor which reveals the tooth-bone discrepancy. Deciduous second molar and permanent first molar exhibit least degree of variation. Both the dermal ridges and the enamel layer of the tooth originate from ectodermal layer and during the same period of intrauterine life. Aim To determine and compare the dermatoglyphics with the mesiodistal width of the deciduous second molar and permanent first molar. Materials and Methods A sample of 120 child ranaged between 6-12 years were included in the study whose digital and palmer traits were recorded using ink method and the mesiodistal widths of the deciduous second molar and permanent first molar were recorded using a vernier caliper. The data was subjected to statistical analysis using unpaired t test. Results The ‘ATD’ angle was found in the range of 40°-50°. The loop patterns were more common followed by whorls and arch patterns. Girls expressed a greater mesiodistal diameter of deciduous second molar than boys. No significant correlation was found in between the dermatoglyphics and tooth size. Conclusion There was no significant correlation between the finger print patterns, ‘ATD’ angle and the mesiodistal diameter of the deciduous second molar and the permanent first molar. PMID:28969275

Fast sodium ionic conduction in Na2B10H10-Na2B12H12 pseudo-binary complex hydride and application to a bulk-type all-solid-state battery

NASA Astrophysics Data System (ADS)

Yoshida, Koji; Sato, Toyoto; Unemoto, Atsushi; Matsuo, Motoaki; Ikeshoji, Tamio; Udovic, Terrence J.; Orimo, Shin-ichi

2017-03-01

In the present work, we developed highly sodium-ion conductive Na2B10H10-Na2B12H12 pseudo-binary complex hydride via mechanically ball-milling admixtures of the pure Na2B10H10 and Na2B12H12 components. Both of these components show a monoclinic phase at room temperature, but ball-milled mixtures partially stabilized highly ion-conductive, disordered cubic phases, whose fraction and favored structural symmetry (body-centered cubic or face-centered cubic) depended on the conditions of mechanical ball-milling and molar ratio of the component compounds. First-principles molecular-dynamics simulations demonstrated that the total energy of the closo-borane mixtures and pure materials is quite close, helping to explain the observed stabilization of the mixed compounds. The ionic conductivity of the closo-borane mixtures appeared to be correlated with the fraction of the body-centered-cubic phase, exhibiting a maximum at a molar ratio of Na2B10H10:Na2B12H12 = 1:3. A conductivity as high as log(σ/S cm-1) = -3.5 was observed for the above ratio at 303 K, being approximately 2-3 orders of magnitude higher than that of either pure material. A bulk-type all-solid-state sodium-ion battery with a closo-borane-mixture electrolyte, sodium-metal negative-electrode, and TiS2 positive-electrode demonstrated a high specific capacity, close to the theoretical value of NaTiS2 formation and a stable discharge/charge cycling for at least eleven cycles, with a high discharge capacity retention ratio above 91% from the second cycle.

Autotransplantation of third molars as treatment in advanced periodontal disease.

PubMed

Kristerson, L; Johansson, L A; Kisch, J; Stadler, L E

1991-08-01

The aim of this study was to investigate the prognosis of replacing molars with advanced periodontitis by autotransplanted fully developed third molars. The patient sample consisted of 18 subjects, 24-58 years of age. The patients selected had at least 1 molar with advanced periodontal tissue destruction. After extraction of the diseased molar, autotransplantation of a third molar was immediately performed. After a splinting and healing period of 2-3 weeks, endodontic treatment was carried out. The follow-up included recordings of the clinical parameters, probing periodontal pocket depth, probing attachment level, percussion sound, and mobility. Radiographs were taken immediately after the surgical procedure, after 6 months, 1 year, and thereafter annually. The results of this study indicate that autotransplantation may be an alternative treatment procedure for molars with advanced periodontal disease.

Automation of data processing and calculation of retention parameters and thermodynamic data for gas chromatography

NASA Astrophysics Data System (ADS)

Makarycheva, A. I.; Faerman, V. A.

2017-02-01

The analyses of automation patterns is performed and the programming solution for the automation of data processing of the chromatographic data and their further information storage with a help of a software package, Mathcad and MS Excel spreadsheets, is developed. The offered approach concedes the ability of data processing algorithm modification and does not require any programming experts participation. The approach provides making a measurement of the given time and retention volumes, specific retention volumes, a measurement of differential molar free adsorption energy, and a measurement of partial molar solution enthalpies and isosteric heats of adsorption. The developed solution is focused on the appliance in a small research group and is tested on the series of some new gas chromatography sorbents. More than 20 analytes were submitted to calculation of retention parameters and thermodynamic sorption quantities. The received data are provided in the form accessible to comparative analysis, and they are able to find sorbing agents with the most profitable properties to solve some concrete analytic issues.

Dentition of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, part 1: quantitative variation.

PubMed

Tornow, Matthew A; Ford, Susan M; Garber, Paul A; de Sa Sauerbrunn, Edward

2006-07-01

Analyses of dental variation in geographically restricted, wild populations of primates are extremely rare; however, such data form the best source for models of likely degrees of variation within and between fossil species. Data from dental casts of a geographically restricted population of moustached tamarins (Saguinus mystax mystax) from Padre Isla, Peru, document high levels of dental variability, as measured by coefficients of variation, in a nonsexually dimorphic species, despite its isolation and small population size. Like other primates, moustached tamarins show lower variability in the dimensions of the first molars and increased variability in the dimensions of the final molars in the toothrow. Moustached tamarins from Padre Isla have a distinctive pattern of variability in the remaining teeth, including more stable tooth lengths in the anterior and posterior portions of the toothrow, and more stable tooth widths in the midregion of the toothrow. High variability in incisor width may be due to age effects of a distinctive diet and pattern of dental wear.

Characterisation of cationic potato starch by asymmetrical flow field-flow fractionation. Influence of ionic strength and degree of substitution.

PubMed

Santacruz, Stalin

2014-06-15

The properties of a paper sheet depend on the absorption together with the physico-chemical properties of additives used in the paper processing. The effect of ionic strength and degree of substitution of cationic potato starch on the elution pattern of asymmetrical flow field-flow fractionation was analysed. The effect of starch derivatisation, in either dry or wet phase, was also investigated. Average molar mass showed no difference between the starches obtained from the two derivatisation processes. Apparent densities showed that dry cationic starch had higher density than wet cationic starch for a hydrodynamic radius between 50 and 100 nm. Elution times of native and three cationic starches increased when the ionic strength increased from 50 to 100mM. No differences in the molar mass among cationic starches with different degree of substitution suggested no degradation due to a derivatisation process. Large sample loads can be used at 100mM without overloading. Copyright © 2014 Elsevier Ltd. All rights reserved.

Spectroscopic and physical measurements on charge-transfer complexes: Interactions between norfloxacin and ciprofloxacin drugs with picric acid and 3,5-dinitrobenzoic acid acceptors

NASA Astrophysics Data System (ADS)

Refat, Moamen S.; Elfalaky, A.; Elesh, Eman

2011-03-01

Charge-transfer complexes formed between norfloxacin (nor) or ciprofloxacin (cip) drugs as donors with picric acid (PA) and/or 3,5-dinitrobenzoic acid (DNB) as π-acceptors have been studied spectrophotometrically in methanol solvent at room temperature. The results indicated the formation of CT-complexes with molar ratio1:1 between donor and acceptor at maximum CT-bands. In the terms of formation constant ( KCT), molar extinction coefficient ( ɛCT), standard free energy (Δ Go), oscillator strength ( f), transition dipole moment (μ), resonance energy ( RN) and ionization potential ( ID) were estimated. IR, H NMR, UV-Vis techniques, elemental analyses (CHN) and TG-DTG investigations were used to characterize the structural of charge-transfer complexes. It indicates that the CT interaction was associated with a proton migration from each acceptor to nor or cip donors which followed by appearing intermolecular hydrogen bond. In addition, X-ray investigation was carried out to scrutinize the crystal structure of the resulted CT-complexes.

Spectroscopic and thermal investigations of charge-transfer complexes formed between sulfadoxine drug and different types of acceptors

NASA Astrophysics Data System (ADS)

Refat, Moamen S.

2011-01-01

Charge-transfer reactions between sulfadoxine (SDOX) as a donor with iodine (I 2), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), p-chloranil (CHL) and picric acid (PA) have been studied in solid and solution forms. The stoichiometry of all complexes was found to be 1:1 by molar ratio method between donor and acceptor at a CT-band absorption bands. The data are discussed in terms of formation constant ( KCT), molar extinction coefficient ( ɛCT), standard free energy (Δ Go), oscillator strength (ƒ), transition dipole moment ( μ), resonance energy ( RN) and ionization potential ( ID). The results indicate that the formation constant ( KCT) for the complexes were shown to be dependent upon the nature of electron acceptor, donor and polarity of solvents which were used. IR, 1H NMR and UV-Vis spectroscopic techniques, Elemental analyses (CHN) and TG-DTG investigation were used to characterize the four sulfadoxine charge-transfer complexes.

Challenges in analysis of high-molar mass dextrans: comparison of HPSEC, AsFlFFF and DOSY NMR spectroscopy.

PubMed

Maina, Ndegwa Henry; Pitkänen, Leena; Heikkinen, Sami; Tuomainen, Päivi; Virkki, Liisa; Tenkanen, Maija

2014-01-01

Dilute solutions of various dextran standards, a high-molar mass (HMM) commercial dextran from Leuconostoc spp., and HMM dextrans isolated from Weissella confusa and Leuconostoc citreum were analyzed with high-performance size-exclusion chromatography (HPSEC), asymmetric flow field-flow fractionation (AsFlFFF), and diffusion-ordered NMR spectroscopy (DOSY). HPSEC analyses were performed in aqueous and dimethyl sulfoxide (DMSO) solutions, while only aqueous solutions were utilized in AsFlFFF and DOSY. The study showed that all methods were applicable to dextran analysis, but differences between the aqueous and DMSO-based solutions were obtained for HMM samples. These differences were attributed to the presence of aggregates in aqueous solution that were less prevalent in DMSO. The study showed that DOSY provides an estimate of the size of HMM dextrans, though calibration standards may be required for each experimental set-up. To our knowledge, this is the first study utilizing these three methods in analyzing HMM dextrans. Copyright © 2013 Elsevier Ltd. All rights reserved.

IR, 1H NMR, mass, XRD and TGA/DTA investigations on the ciprofloxacin/iodine charge-transfer complex.

PubMed

Refat, Moamen S; El-Hawary, W F; Moussa, Mohamed A A

2011-05-01

The charge-transfer complex (CTC) of ciprofloxacin drug (CIP) as a donor with iodine (I(2)) as a sigma acceptor has been studied spectrophotometrically in CHCl(3). At maximum absorption bands, the stoichiometry of CIP:iodine system was found to be 1:1 ratio according to molar ratio method. The essential spectroscopic data like formation constant (K(CT)), molar extinction coefficient (ɛ(CT)), standard free energy (ΔG°), oscillator strength (f), transition dipole moment (μ), resonance energy (R(N)) and ionization potential (I(D)) were estimated. The spectroscopic techniques such as IR, (1)H NMR, mass and UV-vis spectra and elemental analyses (CHN) as well as TG-DTG and DTA investigations were used to characterize the chelating behavior of CIP/iodine charge-transfer complex. The iodine CT interaction was associated with a presence of intermolecular hydrogen bond. The X-ray investigation was carried out to investigate the iodine doping in the synthetic CT complex. Copyright © 2011 Elsevier B.V. All rights reserved.

Patterns of third-molar agenesis and associated dental anomalies in an orthodontic population.

PubMed

Celikoglu, Mevlut; Bayram, Mehmet; Nur, Metin

2011-12-01

The aim of this study was to investigate the frequency of dental anomalies in orthodontic patients with different patterns of third-molar agenesis, comparing them with patients without third-molar agenesis. A sample of 374 patients with agenesis of at least 1 third molar was divided into 4 groups according to the third-molar agenesis pattern, and a control group of 98 patients without third-molar agenesis was randomly selected from the patient archives. Panoramic radiographs and cast models were used to determine the associated dental anomalies, such as hypodontia, hyperdontia, impaction, dilaceration, microdontia, ectopic eruption, transposition, and transmigration. The Pearson chi-square and Fisher exact tests were used to determine the differences in the distribution of the associated dental anomalies among the groups. The prevalence of agenesis of other teeth (11.2%, n = 42) was significantly greater in our study sample (groups 1-4) than in the control group (group 5) (4.1%, n = 4; P <0.05). When we compared the groups according to the various third-molar agenesis patterns, we found that agenesis of other teeth was more common in patients with agenesis of 3 and 4 third molars. In addition, the patients with agenesis of 4 third molars exhibited maxillary lateral-incisor microdontia more frequently. Another important finding was a higher prevalence of total dental anomalies in patients with agenesis of 3 and 4 third molars compared with the control group. Permanent tooth agenesis, microdontia of maxillary lateral incisors, and total dental anomalies are more frequently associated with agenesis of 4 third molars than with the presence of third molars. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Long- and short-term effects of headgear traction with and without the maxillary second molars.

PubMed

Shpack, Nir; Brosh, Tamar; Mazor, Yoav; Shapinko, Yoav; Davidovitch, Moshe; Sarig, Rachel; Reimann, Susanne; Bourauel, Christoph; Vardimon, Alexander D

2014-10-01

A quantitative assessment of maxillary first molar distalization with and without the maxillary second molar (M2) was carried out. Fifty-six cervical headgear patients undergoing fixed appliance orthodontic treatment were divided into 2 groups: before (G - M2) and after (G + M2) eruption of the maxillary second molars (ages, 11.87 ± 1.20, and 13.05 ± 1.55 years, respectively). The tightness of the dental contact point (TDCP) and the space between the second premolar and the maxillary first molar were measured at 6 levels of headgear force (0-15 N) at 3 intervals 6 months apart (T0, T1, T2). Relationships were found between space and TDCP, time, and presence or absence of the maxillary second molar at T1 and T2 (P <0.001). The TDCP decreased and space increased with increase in initial headgear force. An increase in initial force beyond 6 to 9 N did not significantly increase the initial maxillary first molar distalization. The G - M2 TDCP and space measurements were similar to those of G + M2 at T2 with the eruption of the maxillary second molar. From T0 to T1, maxillary first molar distalization was greater in G - M2. In comparison with our previous headgear-alone study, initial distalization with a fully bonded appliance was reduced by 4-fold. Headgear therapy is more effective before the eruption of the maxillary second molar. Once it erupts, the distalization pace of the maxillary first molar is reduced, but it can nevertheless be pursued at a slower pace when the maxillary second molar is present. Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Effectiveness of a personalized device in the evaluation of mandibular second molar periodontal healing after surgical extraction of adjacent third molar.

PubMed

Pippi, Roberto

2013-01-01

The primary aim of the present study was to validate the effectiveness of a personalized device able to guide periodontal probing in evaluation of second molar periodontal healing after adjacent third molar surgical extraction. Secondarily, the study analyzed if any patient and tooth related factors affected the second molar periodontal healing as well as if they were able to affect the periodontal probing depth performed with or without the personalized device. Thirty-five lower second molars were evaluated after extraction of the adjacent third molar. Pre-operative as well as 3 and 12 month post-operative probing depths of the distal surface of the second molar were evaluated. All measurements were taken by two different methods: standard two-point and four-point probing using a personalized onlay-type guide. Periapical radiographs were also evaluated. The Pearson product moment and the general linear model with backward stepwise procedure were used for inferential statistics. The mean 12-month post-operative probing depth/mean pre-operative probing depth ratio obtained with the guided probing method showed a highly significant effect on the 12-month radiographic post-operative/pre-operative radiographic measure ratio. None of the examined patient- or tooth-related factors showed a significant effect on pre-operative/12-month post-operative radiographic measure ratio. The use of the proposed personalized device seems to provide a more reliable estimate of second molar periodontal healing after adjacent third molar surgical extraction. No patient-or tooth-related factors seem to be able to affect either second molar periodontal healing or probing depth measures obtained with or without the personalized device in individuals younger than 25 years old. It can be therefore recommended that lower third molar surgical extraction be performed in young adults.

Development of caries in permanent first molars adjacent to primary second molars with interproximal caries: four-year prospective radiographic study.

PubMed

Vanderas, Apostole P; Kavvadia, Katerina; Papagiannoulis, Lisa

2004-01-01

This study investigated the effect of the primary second molars' distal surface caries on the incidence of the permanent first molars' mesial surface caries in 613 paired tooth surfaces of children ages 6 to 8 years at baseline examination. Proximal caries and its progression were diagnosed by bite-wing radiographs taken at a 1-year interval over a period of 4 years. The permanent first molars' mesial surfaces and primary second molars' distal surfaces were examined. Recorded were: (1) sound surfaces; (2) carious lesions on the enamel's external and internal half and on the dentin's external, middle, and internal third; (3) filled, extracted, and exfoliated teeth. The logistic model for panel data was employed to estimate the effect of proximal caries of the primary second molars' distal surfaces on the incidence of the permanent first molars' mesial surface caries. The 95% confidence interval probability was used. Sensitivity and specificity as well as the positive and negative predictive rates were computed. The results showed that the presence of proximal caries on each primary second molars' distal surfaces significantly affected the development of proximal caries on the corresponding permanent first molar's mesial surfaces. Age was estimated to exert a positive and highly significant impact, while gender had no effect. The odds ratio values ranged from 4.86 to 63.43. The values of sensitivity and specificity ranged from 45% to 97% and 80% to 89%, respectively, while the positive and negative rates ranged from 40% to 56% and 90% to 99%, respectively. Proximal caries present on the primary second molars' distal surfaces increases the risk of developing caries on the permanent first molars' mesial surfaces. This risk, however, is different among the paired surfaces studied.

Development of efficient electrocatalysts via molecular hybridization of NiMn layered double hydroxide nanosheets and graphene

NASA Astrophysics Data System (ADS)

Ma, Wei; Ma, Renzhi; Wu, Jinghua; Sun, Pengzhan; Liu, Xiaohe; Zhou, Kechao; Sasaki, Takayoshi

2016-05-01

Ni2+Mn3+ layered double hydroxide (LDH) nanoplatelets have been hydrothermally synthesized in a homogeneous precipitation of mixed Ni2+/Mn2+ salts at a molar ratio of 2 : 1 via the hydrolysis of hexamethylenetetramine (HMT) and in situ oxidation with H2O2. After anion-exchange, NiMn LDH was exfoliated into unilamellar nanosheets. Subsequent flocculation of NiMn LDH nanosheets with (reduced) graphene oxide (GO/rGO) into superlattice composites was achieved and further tested as electrocatalysts for oxygen evolution reaction (OER). The face-to-face heteroassembly of NiMn LDH nanosheets with conductive rGO at an alternating sequence resulted in a small overpotential of 0.26 V and a Tafel slope of 46 mV per decade, which is much superior to as-exfoliated nanosheets. The analyses of electrochemical activity surface area (ECSA) and impedance spectra clearly indicated that the superlattice structure was ideal in facilitating the migration/transfer of the charge and reactants, revealing the electrochemical energetics and mechanism behind the synergistic effect arising from molecular hybridization. The proof of concept toward total water splitting using the newly developed hybrid electrocatalyst was demonstrated by an electrolysis cell powered by a single AA battery.Ni2+Mn3+ layered double hydroxide (LDH) nanoplatelets have been hydrothermally synthesized in a homogeneous precipitation of mixed Ni2+/Mn2+ salts at a molar ratio of 2 : 1 via the hydrolysis of hexamethylenetetramine (HMT) and in situ oxidation with H2O2. After anion-exchange, NiMn LDH was exfoliated into unilamellar nanosheets. Subsequent flocculation of NiMn LDH nanosheets with (reduced) graphene oxide (GO/rGO) into superlattice composites was achieved and further tested as electrocatalysts for oxygen evolution reaction (OER). The face-to-face heteroassembly of NiMn LDH nanosheets with conductive rGO at an alternating sequence resulted in a small overpotential of 0.26 V and a Tafel slope of 46 mV per decade, which is much superior to as-exfoliated nanosheets. The analyses of electrochemical activity surface area (ECSA) and impedance spectra clearly indicated that the superlattice structure was ideal in facilitating the migration/transfer of the charge and reactants, revealing the electrochemical energetics and mechanism behind the synergistic effect arising from molecular hybridization. The proof of concept toward total water splitting using the newly developed hybrid electrocatalyst was demonstrated by an electrolysis cell powered by a single AA battery. Electronic supplementary information (ESI) available: Typical TG-DSC curves, XRD patterns, elemental mapping profiles, LSV curves, Tafel plots, current density difference curves, current density against ECSA curves and designed water-splitting cell. See DOI: 10.1039/c6nr00988c

Endodontic management of contralateral mandibular first molars with six root canals

PubMed Central

Bhargav, Kambhampati; Sirisha, Kantheti; Jyothi, Mandava; Boddeda, Mohan Rao

2017-01-01

The knowledge of variations in root canal morphology is essential for a successful endodontic outcome. Contralateral mandibular molar with six root canals is a rare entity. Root canal treatment of mandibular molars with aberrant canal configuration can be diagnostically and technically challenging. While dealing with variant mandibular molars, mishaps may happen. This case report describes variations in contralateral mandibular molars and also an endodontic mishap while managing them. PMID:29259369

Age estimation using development of third molars in South Indian population: A radiological study

PubMed Central

Priyadharshini, K. Indra; Idiculla, Jose Joy; Sivapathasundaram, B.; Mohanbabu, V.; Augustine, Dominic; Patil, Shankargouda

2015-01-01

Aim: To assess the estimation of chronological age based on the stages of third molar development following the eight stages (A–H) method of Demirjian et al. in Chennai population of South India. Materials and Methods: A sample consisting of 848 individuals (471 males and 377 females) aged between 14 and 30 years was randomly selected for the clinical evaluation and 323 orthopantomograms with clinically missing third molars were taken for radiological evaluation using Demirjian's method from a Chennai population of known chronological age and sex. Statistical analysis was performed using Pearson's Chi-square test and mean values were compared between the study groups using t-test or analysis of variance (ANOVA) followed by Tukey's highly significant difference (HSD). In the present study, P < 0.05 was considered as the level of significance. Results: The results showed that the mean age of having clinically completely erupted maxillary third molars was 22.41 years in male subjects and 23.81 years in female subjects and that of mandibular third molars was 21.49 years in male subjects and 23.34 years in female subjects. Mandibular third molars were clinically missing more often in females than in males. Eruption of mandibular third molars was generally ahead of the emergence of maxillary third molars into the oral cavity. Third molar development between male and female subjects showed statistically significant differences at calcification stage F and stage G in maxillary third molars and stage F in mandibular third molars (P < 0.05). Conclusion: There are differences indicating that maxillary and mandibular third molar eruption reached Demirjian's formation stages earlier in males than in females. It is suggested that in future studies, to increase the accuracy of age determination, indications of sexual maturity and ossification should also be evaluated in addition to third molar mineralization. PMID:25984465

Retrospective study of root canal configurations of maxillary third molars in Central India population using cone beam computed tomography Part- I

PubMed Central

Rawtiya, Manjusha; Somasundaram, Pavithra; Wadhwani, Shefali; Munuga, Swapna; Agarwal, Manish; Sethi, Priyank

2016-01-01

Objective: The aim of this study was to investigate the root and canal morphology of maxillary third molars in Central India population using cone-beam computed tomography (CBCT) analysis. Materials and Methods: CBCT images of 116 maxillary third molars were observed, and data regarding the number of roots, the number of canals, and Vertucci's Classification in each root was statistically evaluated. Results: Majority of Maxillary third molars had three roots (55.2%) and three canals (37.9%). Most MB root (43.8%), DB root (87.5%), and palatal root (100%) of maxillary third molars had Vertucci Type I. Mesiobuccal root of three-rooted maxillary third molars had Vertucci Type I (43.8%) and Type IV (40.6%) configuration. Overall prevalence of C-shaped canals in maxillary third molars was 3.4%. Conclusion: There was a high prevalence of three-rooted maxillary molars with three canals. PMID:27011747

Retrospective Study of Root Canal Configurations of Mandibular Third Molars Using CBCT- Part-II.

PubMed

Somasundaram, Pavithra; Rawtiya, Manjusha; Wadhwani, Shefali; Uthappa, Roshan; Shivagange, Vinay; Khan, Sheeba

2017-06-01

Abnormal root canal morphologies of third molars can be diagnostically and technically challenging during root canal treatment. The aim of this retrospective study was to investigate the root and canal morphology of mandibular third molars in Central India population by using Cone Beam Computed Tomography (CBCT) analysis. CBCT images of 171 mandibular third molars were observed and data regarding number of roots, number of canals, Vertucci's classification in each root, prevalence of C shaped canal, gender and topographical relation of morphology in mandibular third molar was statistically evaluated. Majority of mandibular third molars had two roots (84.2%) and three canals (64.3%). Most mesial root had Vertucci Type II (55.6%) and Vertucci Type IV (22.2%), distal root had Type I canals (87.5%). Over all prevalence of C shaped canals in mandibular third molars was 9.4%. There was a high prevalence of two rooted mandibular third molars with three canals.

Molar distalization with 2K appliance: one-year follow-up

PubMed Central

Tripathi, Tulika; Rai, Priyank; Singh, Navneet

2017-01-01

Correction of class II molars in growing patients with acceptable facial profile can be performed by distalization of maxillary first molars. However, in patients where compliance is difficult intraoral means of molar distalization is required. This case report describes the use and effectiveness of a novel 2K appliance in an 11-year-old female having an orthognathic profile, skeletal Class I relation, and Angle's Class II division 1 malocclusion with crowding of 8 mm and 3 mm in the maxillary and mandibular arches, respectively. Nonextraction treatment was planned with bilateral distalization of the maxillary first molars. The amount of distalization achieved by 2K appliance was 3.5 mm with only 1° distal tipping. The 2K appliance required minimal patient cooperation, produced bodily movement of molars with minimal tipping/rotation, and prevented anchorage loss of the anterior teeth. This 2K molar distalization appliance was found to be an effective technique to control molars in all three planes of space. PMID:28717634

Uprighting of severely impacted mandibular second molars: a case report.

PubMed

Fujita, Tadashi; Shirakura, Maya; Hayashi, Hidetaka; Tsuka, Yuji; Fujii, Eri; Tanne, Kazuo

2012-11-01

The incidence of mandibular first and second molar impaction is increasing but still recorded as rare. Treatment methods involving uprighting, extraction, or autologous tooth transplantation have been described. The present study describes the uprighting of 3 impacted mandibular second molars presenting with eruptive disorders. The application of limited and appropriate orthodontic therapy completed treatment in 11 months, 5 months, and 2 years and 3 months, respectively. Although no absolute anchorage in the form of miniscrews was required, no significant anchorage demands were considered necessary. Although the third molar tooth germs were identified and preserved in each case, no adverse influence on the uprighting of the second molars was encountered. The favourable molar repositioning results were likely due to the youth of the 3 patients as the third molars were in early development and bone remodelling was marked. Furthermore, no problems related to anchorage or alveolar bone loss were identified after treatment. The results indicated the benefits of limited orthodontic treatment and early intervention for the uprighting of impacted mandibular second molars.

Retrospective Study of Root Canal Configurations of Mandibular Third Molars Using CBCT- Part-II

PubMed Central

Somasundaram, Pavithra; Wadhwani, Shefali; Uthappa, Roshan; Shivagange, Vinay; Khan, Sheeba

2017-01-01

Introduction Abnormal root canal morphologies of third molars can be diagnostically and technically challenging during root canal treatment. Aim The aim of this retrospective study was to investigate the root and canal morphology of mandibular third molars in Central India population by using Cone Beam Computed Tomography (CBCT) analysis. Materials and Methods CBCT images of 171 mandibular third molars were observed and data regarding number of roots, number of canals, Vertucci’s classification in each root, prevalence of C shaped canal, gender and topographical relation of morphology in mandibular third molar was statistically evaluated. Results Majority of mandibular third molars had two roots (84.2%) and three canals (64.3%). Most mesial root had Vertucci Type II (55.6%) and Vertucci Type IV (22.2%), distal root had Type I canals (87.5%). Over all prevalence of C shaped canals in mandibular third molars was 9.4%. Conclusion There was a high prevalence of two rooted mandibular third molars with three canals. PMID:28764294

Autogenous transplantation of mandibular third molar to replace tooth with vertical root fracture

PubMed Central

Asgary, Saeed

2009-01-01

Autogenous tooth transplantation (ATT) can be considered when there is a hopeless molar tooth and suitable donor present. This report presents an unconventional case of successful ATT of a third molar replacing the adjacent fractured second molar in a 33 year old woman. This wisdom tooth had completely developed roots. Root-end filling with Calcium Enriched Mixture (CEM) cement was performed in the third molar. The second molar was extracted non-traumatically without any bone removal; the wisdom tooth was immediately transplanted into the recipient socket. No endodontic treatment was carried out either during or after the ATT. At six-month and 2-year clinical examination the patient was asymptomatic; the transplanted tooth was still functional, with no evidence of marginal periodontal pathosis. At the same follow ups, radiographic evaluation illustrated bone regeneration, normal PDL, and absence of external root resorption. Transplantation of mature third molar seems to be a promising method for replacing a lost permanent molar tooth and restoring aesthetics and function. PMID:24003333

Synthesis, spectral, DFT modeling, cytotoxicity and microbial studies of novel Zr(IV), Ce(IV) and U(VI) piroxicam complexes

NASA Astrophysics Data System (ADS)

El-Shwiniy, Walaa H.; Zordok, Wael A.

2018-06-01

The Zr(IV), Ce(IV) and U(VI) piroxicam anti-inflammatory drug complexes were prepared and characterized using elemental analyses, conductance, IR, UV-Vis, magnetic moment, IHNMR and thermal analysis. The ratio of metal: Pir is found to be 1:2 in all complexes estimated by using molar ratio method. The conductance data reveal that Zr(IV) and U(VI) chelates are non-electrolytes except Ce(IV) complex is electrolyte. Infrared spectroscopic confirm that the Pir behaves as a bidentate ligand co-ordinated to the metal ions via the oxygen and nitrogen atoms of ν(Cdbnd O)carbonyl and ν(Cdbnd N)pyridyl, respectively. The kinetic parameters of thermogravimetric and its differential, such as activation energy, entropy of activation, enthalpy of activation, and Gibbs free energy evaluated using Coats-Redfern and Horowitz-Metzger equations for Pir and complexes. The geometry of the piroxicam drug in the Free State differs significantly from that in the metal complex. In the time of metal ion-drug bond formation the drug switches-on from the closed structure (equilibrium geometry) to the open one. The antimicrobial tests were assessed towards some types of bacteria and fungi. The in vitro cell cytotoxicity of the complexes in comparison with Pir against colon carcinoma (HCT-116) cell line was measured. Optimized geometrical structure of piroxicam ligand by using DFT calculations.

Endodontic treatment of a maxillary first molar with seven root canals confirmed with cone beam computer tomography - case report.

PubMed

Martins, Jorge N R

2014-06-01

The most common configuration of the maxillary first molar is the presence of three roots and four root canals, although the presence of several other configurations have already been reported. The objective of this work is to present a rare anatomic configuration with seven root canals diagnosed during an endodontic therapy. Endodontic treatment was performed using a dental operating microscope. Exploring the grooves surrounding the main canals with ultrasonic troughing was able expose unexpected root canals. Instrumentation with files of smaller sizes and tapers was performed to prevent root physical weakness. The anatomic configuration was confirmed with a Cone Beam Computer Tomography image analysis which was able to clearly show the presence of seven root canals. An electronic database search was conducted to identify all the published similar cases and the best techniques to approach them are discussed.

Relation between heat of vaporization, ion transport, molar volume, and cation-anion binding energy for ionic liquids.

PubMed

Borodin, Oleg

2009-09-10

A number of correlations between heat of vaporization (H(vap)), cation-anion binding energy (E(+/-)), molar volume (V(m)), self-diffusion coefficient (D), and ionic conductivity for 29 ionic liquids have been investigated using molecular dynamics (MD) simulations that employed accurate and validated many-body polarizable force fields. A significant correlation between D and H(vap) has been found, while the best correlation was found for -log(DV(m)) vs H(vap) + 0.28E(+/-). A combination of enthalpy of vaporization and a fraction of the cation-anion binding energy was suggested as a measure of the effective cohesive energy for ionic liquids. A deviation of some ILs from the reported master curve is explained based upon ion packing and proposed diffusion pathways. No general correlations were found between the ion diffusion coefficient and molecular volume or the diffusion coefficient and cation/anion binding energy.

Desulfurization of Saudi Arabian crudes by oxidation-extraction method.

PubMed

Al Otaibi, Raja L; Liu, Dong; Hou, Xulian; Song, Linhua; Li, Qingyin; Li, Mengfei; Almigrin, Hamid O; Yan, Zifeng

The oxidation-extraction desulfurization of Saudi Arabian crudes was conducted with hydrogen peroxide-acetic acid oxidation system. The selection of extractant, the optimization of oxidation-extraction conditions, and the exploration of desulfurization mechanism were studied. As DMF was used as the extractant, the optimal desulfurization rate of 35.11 % and oil recovery of 95 % were obtained at 70 °C with the molar ratio of peracetic acid to sulfur of 8:1, the molar ratio of acetic acid to hydrogen peroxide of 2:1 and the volume ratio of extractant to oil of 1:1. The desulfurization effect of different fractions in the treated Saudi Arabian crudes was found to obey the following order: gasoline-diesel fraction >VGO fraction >VR fraction, due to different types and structures of sulfur compounds. The oil quality was less affected and most sulfides were mainly extracted via DMF.

Synthesis, Spectral, and In Vitro Antibacterial Studies of Organosilicon(IV) Complexes with Schiff Bases Derived from Amino Acids.

PubMed

Singh, Har Lal; Singh, Jangbhadur; Mukherjee, A

2013-01-01

The present work stems from our interest in the synthesis, characterization, and antibacterial evaluation of organosilicon(IV) complexes of a class of amino-acid-based Schiff base which have been prepared by the interaction of ethoxytrimethylsilane with the Schiff bases (N OH) in 1 : 1 molar ratio. These complexes have been characterized by elemental analysis, molar conductance, and spectroscopic studies including electronic IR and NMR ((1)H, (13)C, and (29)Si) spectroscopy. The analytical and spectral data suggest trigonal bipyramidal geometry around the silicon atom in the resulting complexes. The ligands and their organosilicon complexes have also been evaluated for in vitro antimicrobial activity against bacteria (Bacillus cereus, Nocardia spp., E. aerogenes, Escherichia coli, Klebsiella spp., and Staphylococcus spp.). The complexes were found to be more potent as compared to the ligands.

Ultrasonication aided in-situ transesterification of microbial lipids to biodiesel.

PubMed

Zhang, Xiaolei; Yan, Song; Tyagi, Rajeshwar Dayal; Surampalli, Rao Y; Valéro, Jose R

2014-10-01

In-situ transesterification of microbial lipid to biodiesel has been paid substantial attention due to the fact that the lipid extraction and transesterification can be conducted in one-stage process. To improve the feasibility of in-situ transesterification, ultrasonication was employed to reduce methanol requirement and reaction time. The results showed that the use of ultrasonication could achieve high conversion of lipid to FAMEs (92.1% w lipid conversion/w total lipids) with methanol to lipid molar ratio 60:1 and NaOH addition 1% w/w lipid in 20 min, while methanol to lipid molar ratio 360:1, NaOH addition 1% w/w lipid, and reaction time 12h was required to obtain similar yield in in-situ transesterification without ultrasonication. The compositions of FAMEs obtained in case of ultrasonication aided in-situ transesterification were similar as that of two-stage extraction followed by transesterification processes. Copyright © 2014. Published by Elsevier Ltd.

[Hyperthyroidism in molar pregnancy].

PubMed

Boufettal, H; Mahdoui, S; Noun, M; Hermas, S; Samouh, N

2014-03-01

Hyperthyroidism is a rare complication of molar pregnancy. We report a 39-year-old woman who presented a thyrotoxic syndrome accompanying a molar pregnancy. Serum thyroid hormones were elevated and returned to normal level after uterine evacuation of a molar pregnancy. The authors detail the role of thyroid stimulating property of human gonadotropin chorionic hormone and its structural changes during the gestational trophoblastic diseases. These changes give the latter the thyroid stimulating properties and signs of hyperthyroidism. Molar pregnancy may be a cause of hyperthyroidism. The diagnosis of molar pregnancy should be a mention to thyrotoxicosique syndrome in a woman of childbearing age. Copyright © 2013. Published by Elsevier SAS.

Physicochemical properties of binary solutions of propylene carbonate-acetonitrile in the range of 253.15-313.15 K

NASA Astrophysics Data System (ADS)

Tyunina, E. Yu.; Chekunova, M. D.

2017-05-01

The density, dynamic viscosity, and dielectric constant of propylene carbonate solutions with acetonitrile are measured over the composition of a mixed solvent at temperatures of 253.15, 273.15, 293.15, and 313.15 K. The molar volume, molar viscosity, and molar capacity of a mixture of propylene carbonate-acetonitrile and an excess amount of it are calculated. The effect the temperature and composition of the mixture have on the excess molar properties is discussed. A linear correlation is observed between the values of the molar fluidity, capacity, polarization, and molar volume of the studied system.

The effects of NICE guidelines on the management of third molar teeth.

PubMed

McArdle, L W; Renton, T

2012-09-01

Third molar surgery (TMS) is probably one of the most commonly performed surgical procedures undertaken in the NHS. In 2000, the National Institute of Clinical Excellence (NICE) introduced guidelines relating to TMS. These recommended against the prophylactic removal of third molars and listed specific clinical indications for surgery. The impact of these guidelines has not been fully evaluated and this research hopes to focus the effect of these guidelines over the last ten years. Using data obtained from a variety of NHS databases such as HES (Eng & Wales), the NHSBSA and data from NHS Scotland, we looked at the age range of patients requiring third molar removal and the number of patients having third molars removed in both primary and secondary care environments from 1989 to 2009. In addition we looked at the clinical indications for TMS activity in secondary care. The mean age of patients increased from 25 years in 2000 to 32 years in 2010, with the modal (most common) age increasing from 26 to 29 years. After the introduction of clinical guidelines the number of patients requiring third molar removal in secondary care dropped by over 30%, however, since 2003 the number of patients has risen by 97%. There is also a significant increase in caries as an indication for third molar removal. More patients are requiring third molar removal with an increasing number of patients having caries related to their third molars. Patients are, on average, older confirming that the removal of third molars is shifting from a young adult population group to an older adult population group. NICE guidelines did appear to have contributed to a fall in the volume of third molars removed within the NHS post 2000. However, concluding that this reduction demonstrates the success of NICE's guidance would be a premature assumption. The number of patients now requiring third molar removal is comparable to that of the mid 1990s. NICE has influenced the management of patients with third molars but this has not resulted in any reduction in the number of patients requiring third molar removal. Coding and data collection for third molars is not uniform, leading to potential misrepresentation of data. This perhaps raises the issue that an improved universal coding system is required for the NHS and that the NICE guidelines need review.

Cl/Br ratios and chlorine isotope evidences for groundwater salinization and its impact on groundwater arsenic, fluoride and iodine enrichment in the Datong basin, China.

PubMed

Li, Junxia; Wang, Yanxin; Xie, Xianjun

2016-02-15

In order to identify the salinization processes and its impact on arsenic, fluoride and iodine enrichment in groundwater, hydrogeochemical and environmental isotope studies have been conducted on groundwater from the Datong basin, China. The total dissolved solid (TDS) concentrations in groundwater ranged from 451 to 8250 mg/L, and 41% of all samples were identified as moderately saline groundwater with TDS of 3000-10,000 mg/L. The results of groundwater Cl concentrations, Cl/Br molar ratio and Cl isotope composition suggest that three processes including water-rock interaction, surface saline soil flushing, and evapotranspiration result in the groundwater salinization in the study area. The relatively higher Cl/Br molar ratio in groundwater from multiple screening wells indicates the contribution of halite dissolution from saline soil flushed by vertical infiltration to the groundwater salinization. However, the results of groundwater Cl/Br molar ratio model indicate that the effect of saline soil flushing practice is limited to account for the observed salinity variation in groundwater. The plots of groundwater Cl vs. Cl/Br molar ratio, and Cl vs δ(37)Cl perform the dominant effects of evapotranspiration on groundwater salinization. Inverse geochemical modeling results show that evapotranspiration may cause approximately 66% loss of shallow groundwater to account for the observed hydrochemical pattern. Due to the redox condition fluctuation induced by irrigation activities and evapotranspiration, groundwater salinization processes have negative effects on groundwater arsenic enrichment. For groundwater iodine and fluoride enrichment, evapotranspiration partly accounts for their elevation in slightly saline water. However, too strong evapotranspiration would restrict groundwater fluoride concentration due to the limitation of fluorite solubility. Copyright © 2015. Published by Elsevier B.V.

Ammonium Nitrogen Removal from Urea Fertilizer Plant Wastewater via Struvite Crystal Production

NASA Astrophysics Data System (ADS)

Machdar, I.; Depari, S. D.; Ulfa, R.; Muhammad, S.; Hisbullah, A. B.; Safrul, W.

2018-05-01

Elimination of ammonium concentration from urea fertilizer plant wastewater through struvite crystal (NH4MgPO4.6H2O) formation by adding MgCl2, KH2PO4, and KOH were studied. This method of elimination has two benefits, namely, reducing ammonium nitrogen content in the wastewater, as well as production of a valuable material (struvite crystal). Struvite is known as a slow-release fertilizer and less soluble. This report presents the ammonium removal efficiencies during struvite formation. The growth of struvite production under different molar ratios of Mg2+:NH4 +:PO4 3- and solution pH is also discussed. To find the efficiencies and measure the growth rates, lab-scale experiments were conducted in a batch crystallizer-reactor. SEM, XRD, and FTIR observation were also applied to investigate the characteristics of struvite. The reactant molar ratios of Mg2+:NH4 +:PO4 3- of 1.2:1:1, 1:1:1.2, and 1:1:1 were evaluated. Each of the molar ratios was treated at the solution pH of 8, 9, and 10. It was found that, the highest ammonium removal efficiency was 94.7% at the molar ratio of 1.2:1:1 and pH of 9. Primarily, the growth rate of struvite formation complied with a first-order kinetic model. The rate constants (k1) were calculated to be 2.6, 4.3, and 5.0 h-1 for solution pH of 8, 9, and 10, respectively. The findings of the study provide suggestion for an alternative sustainable recovery of ammonium nitrogen content in a urea fertilizer plant effluent.

Standardised studies on Molar Incisor Hypomineralisation (MIH) and Hypomineralised Second Primary Molars (HSPM): a need.

PubMed

Elfrink, M E C; Ghanim, A; Manton, D J; Weerheijm, K L

2015-06-01

In November 2014, a review of literature concerning prevalence data of Molar Incisor Hypomineralisation (MIH) and Hypomineralised Second Primary Molars (HSPM) was performed. A search of PubMed online databases was conducted for relevant articles published until November 2014. The reference lists of all retrieved articles were hand-searched. Studies were included after assessing the eligibility of the full-text article. Out of 1078 manuscripts, a total of 157 English written publications were selected based on title and abstract. Of these 157, 60 were included in the study and allocated as 52 MIH and 5 HSPM, and 3 for both MIH and HSPM. These studies utilised the European Academy of Paediatric Dentistry judgment criteria, the modified index of developmental defects of enamel (mDDE) and self-devised criteria, and demonstrated a wide variation in the reported prevalence (MIH 2.9-44 %; HSPM 0-21.8 %). Most values mentioned were representative for specific areas. More studies were performed in cities compared with rural areas. A great variation was found in calibration methods, number of participants, number of examiners and research protocols between the studies. The majority of the prevalence studies also investigated possible aetiological factors. To compare MIH and HSPM prevalence and or aetiological data around the world, standardisation of such studies seems essential. Standardisation of the research protocol should include a clearly described sample of children (minimum number of 300 for prevalence and 1000 for aetiology studies) and use of the same calibration sets and methods whereas aetiological studies need to be prospective in nature. A standardised protocol for future MIH and HSPM prevalence and aetiology studies is recommended.

Mandibular second molar periodontal healing after impacted third molar extraction in young adults.

PubMed

Faria, Ana Inocêncio; Gallas-Torreira, Mercedes; López-Ratón, Mónica

2012-12-01

To estimate the prevalence of preoperative periodontal defects and analyze 12-month spontaneous healing on the distal aspect of the mandibular second molar (M2) after impacted mandibular third molar (M3) extraction. This prospective clinical study was conducted in 25 healthy young patients (21.03 ± 4.38 yr old) with 40 extractions of higher-risk periodontal impacted M3s. Plaque and gingival indexes, recession, bleeding on probing, probing depth (PD), and attachment level were recorded before surgery and at 3, 6, and 12 months after surgery at 5 sites on the distal aspect of the M2. The initial mean PD was 5.70 ± 3.80 mm, with the deepest mean PD at the lingual side. At 12 months, a mean PD average of 3.77 ± 2.86 mm was recorded, with a total average recovery of 1.93 ± 2.46 mm (P < .001), that was higher at 3 months (-1.62 mm, P < .001). The PD and attachment level improvements were statistically significant (P < .001) and nearly clinically significant from baseline to 12-month follow-up and from the buccal to the lingual side of the distal aspect of the M2. Impacted M3s adjacent to M2s lead to periodontal defects that are deepest at the lingual side and almost recover at 12 months after extraction. The first 3 months is considered the cutoff for periodontal healing. Young adults with high-risk periodontal M3 impactions may benefit from early extraction, which increases spontaneous periodontal healing. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Treatment planning considerations for molar uprighting.

PubMed

Kaur, Harsimrat; Pavithra, U S; Shabeer, N N; Reji, Abraham

2014-01-01

Molar uprighting cases require individualized treatment planning depending upon condition of ridge, growth pattern of patient, periodontal condition, lower facial height, position of third molar and anchorage. Uprighting of molar was done in two cases--effectively using simple tip back spring in one case and implant in another.

Sub-10-Minute Characterization of an Ultrahigh Molar Mass Polymer by Multi-detector Hydrodynamic Chromatography

USDA-ARS?s Scientific Manuscript database

Molar mass averages, distributions, and architectural information of polymers are routinely obtained using size-exclusion chromatography (SEC). It has previously been shown that ultrahigh molar mass polymers may experience degradation during SEC analysis, leading to inaccurate molar mass averages a...

40 CFR 1065.665 - THCE and NMHCE determination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... non-oxygenated hydrocarbons, alcohols, and aldehydes. x NOTHC = The sum of the C1-equivalent... this into a C1-equivalent molar concentration. Add these C1-equivalent molar concentrations to the molar concentration of non-oxygenated total hydrocarbon (NOTHC). The result is the molar concentration...

The Effect of Molar Axial Wall Height on CAD/CAM Ceramic Crowns With Moderate Occlusal Convergence

DTIC Science & Technology

2006-05-01

CEREC e.max* CAD crowns on preparations with moderate total occlusal convergence (16 degrees). Methods: 60 recently-extracted maxillary third molars ...The Effect of Molar Axial Wall Height on CAD/CAM Ceramic Crowns With Moderate Occlusal Convergence Wyeth L. Hoopes The Effect of Molar Axial Wall... Molar Axial Wall Height on CAD/CAM Ceramic Crowns With Moderate Occlusal Convergence is appropria tely acknowledged and beyond brief excerpts, is with

Periodontal considerations in the use of bonds or bands on molars in adolescents and adults.

PubMed

Boyd, R L; Baumrind, S

1992-01-01

This longitudinal study compared the periodontal status of bonded and banded molars in 20 adult and 40 adolescent patients before, during and after treatment with fixed orthodontic appliances. Plaque accumulation (measured by the Plaque Index), gingival inflammation (measured by the Gingival Index and the bleeding tendency), and pocket depth were assessed by one examiner at sites along the mesio-buccal line angle of the maxillary right first molar and the mandibular left first molar. Assessments were made immediately prior to the placement of fixed appliances (pretreatment), at 1, 3, 6, 9, 12 and 18 months after appliances were placed; and 3 months after appliances were removed (posttreatment). Loss of attachment between the pretreatment and posttreatment visits also was determined. At pretreatment, no significant differences were found in gingival inflammation between maxillary and mandibular banded and bonded molars. During treatment, both maxillary and mandibular banded molars showed significantly (p less than 0.05) greater gingival inflammation and plaque accumulation than did bonded molars. Three months after appliance removal, the maxillary molars that had been banded continued to show significantly more gingival inflammation and loss of attachment than did the maxillary molars that had been bonded. When all banded and bonded teeth were grouped by patient age, mean values for plaque accumulation and gingival inflammation in the maxillary molar regions were significantly greater for adolescents than for adults.

Association between the presence of a partially erupted mandibular third molar and the existence of caries in the distal of the second molars.

PubMed

Falci, S G M; de Castro, C R; Santos, R C; de Souza Lima, L D; Ramos-Jorge, M L; Botelho, A M; Dos Santos, C R R

2012-10-01

The objective of this study was to verify, using periapical radiographs, whether a partially erupted mandibular third molar is a factor in the presence of dental caries on the distal surface of the adjacent second molar. Two-forty six high quality periapical radiographs were selected, each showing a partially erupted mandibular third molar. The variables analyzed were: tooth number; gender; age; radiographic presence of caries on the distal surface of the adjacent molar; Pell and Gregory classification; Winter classification; angulation and distance between the second and mandibular third molar. The examiners were previously calibrated to collect data (kappa statistics from 0.87 to 1.0). The prevalence rate of caries on the distal surface of the second molar was 13.4%. In the logistical multivariate regression analysis, the angulation (OR=8.5; IC95%: 1.7-43.8; p=0.011) and the gender (OR=3.3; IC95%: 1.4-7.7; p=0.005) remained statistically significant after an age adjustment was made. The results indicate that the presence of a partially erupted mandibular third molar with an angulation of 31 degrees or more, is a risk factor for caries on the distal surface of the mandibular second molars. Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

The effect of retentive groove, sandblasting and cement type on the retentive strength of stainless steel crowns in primary second molars--an in vitro comparative study.

PubMed

Veerabadhran, M M; Reddy, V; Nayak, U A; Rao, A P; Sundaram, M A

2012-01-01

This in vitro study was conducted to find out the effect of retentive groove, sand blasting and cement type on the retentive strength of stainless steel crowns in primary second molars. Thirty-two extracted intact human maxillary and mandibular primary second molars were embedded in aluminum blocks utilizing autopolymerising acrylic resin. After tooth preparation, the 3M stainless steel crown was adjusted to the prepared tooth. Then weldable buccal tubes were welded on the buccal and lingual surfaces of each crown as an attachment for the testing machine. A full factorial design matrix for four factors (retentive groove placement on the tooth, cement type, sandblasting and primary second molar) at two levels each was developed and the study was conducted as dictated by the matrix. The lower and upper limits for each factor were without and with retentive groove placement on the tooth, GIC and RMGIC, without and with sandblasting of crown, maxillary and mandibular second primary molar. For those teeth for which the design matrix dictated groove placement, the retentive groove was placed on the middle third of the buccal surface of the tooth horizontally and for those crowns for which sandblasting of the crowns are to be done, sandblasting was done with aluminium oxide with a particle size of 250 mm. The crowns were luted with either GIC or RMGIC, as dictated by the design matrix. Then the retentive strength of each sample was evaluated by means of an universal testing machine. The obtained data was analyzed using ANOVA for statistical analysis of the data and 't'- tests for pairwise comparison. The mean retentive strength in kg/cm 2 stainless steel crowns luted with RMGIC was 19.361 and the mean retentive strength of stainless steel crowns luted with GIC was 15.964 kg/cm 2 with a mean difference of 3.397 kg/cm 2 and was statistically significant. The mean retentive strength in kg/cm 2 of stainless steel crowns, which was not sandblasted, was 18.880 and which was sandblasted was 16.445 kg/cm 2 with a mean difference of 2.436 kg/cm 2 . These results were again statistically significant. It was found that the crowns luted with resin-modified glass ionomer cements (RMGIC's) offered better retentive strength of crowns than glass ionomer cements (GIC) and stainless steel crowns which were cemented without sandblasting showed higher mean retentive strength than with sandblasting of crowns. The presence of groove did not influence the retentive strength of stainless steel crowns.

Molar-incisor-hypomineralisation (MIH). Retrospective clinical study in Greek children. I. Prevalence and defect characteristics.

PubMed

Lygidakis, N A; Dimou, G; Briseniou, E

2008-12-01

This was to evaluate the prevalence and the clinical characteristics of MIH in a group of Greek children. During the years 2003--2005, all MIH cases diagnosed according to the recently set criteria were selected from the new patients clinic of a Community Dental Centre for Children (Athens). Age, gender and teeth involved were recorded. The severity of MIH was determined collectively by dividing the affected teeth in two groups; a) mild defect (demarcated opacities) and b) moderate/severe defect (enamel breakdown and atypical restorations). Evaluation of the distribution of the affected teeth within MIH cases was performed in a separate group of 225 affected children aged 8-12 years with their entire 12 'index' teeth erupted. From the 3,518, 5.5 to 12 year old children that were examined, there were 360 (10.2%) children with MIH, 211 (58.6%) females and 149 (41.4%) males, with 1,926 affected teeth, 1,231 molars and 695 incisors. In the molars group, maxillary molars were more frequently affected (87.8/90.3%) than mandibular (81.7/82.2%). In the central incisor group, maxillary teeth were also more frequently affected (50/55%) than mandibular (24.4/25%), while laterals were the least affected. In all there were 37.9% molars with moderate/severe defects as compared with 4.9% incisors, the remaining 62.1% and 95.1% respectively being mild. The various associations between the affected teeth were evaluated in the sub-group of 225 MIH children with all 'index' teeth erupted (1,286 affected teeth, 776 molars and 510 incisors), with mean number of affected teeth per child being 5.7; separately for molars 3.4 and for incisors 2.2. In these cases 28.4% of the children had only molars affected and 71.6% had both molars and incisors. In descending order the associations of affected teeth more frequently found were: 4 molars/2 incisors (23.5%), 4 molars/4 incisors (16.8%), 4 molars alone (15.1%) and 2 molars alone (9.7%), the remaining being much less. As age increased the clinical severity of the affected teeth became more prevalent (p=0.0001), and when the total number of affected teeth was assessed the likelihood of having severe defect was also increased (p=0.001). The prevalence of the defect in the present study was 10.2% with maxillary teeth being more frequently affected. Severity increased with age. Mild defects were much more frequent, particularly in incisors. The total number of teeth affected and the most frequently found associations were, 4 molars/2 incisors, 4 molars/4 incisors, 4 molars alone and 2 molars alone.

Autotransplantation of mandibular third molar: a case report.

PubMed

Ravi Kumar, Pabbati; Jyothi, Mandava; Sirisha, Kantheti; Racca, Khushboo; Uma, Chalasani

2012-01-01

Autogenous transplantation is a feasible, fast, and economical option for the treatment of nonsalvageable teeth when a suitable donor tooth is available. This paper presents successful autotransplantation of a mature mandibular left third molar (38) without anatomical variances is used to replace a mandibular left second molar (37). The mandibular second molar was nonrestorable due to extensive root caries and resorption of distal root. After extraction of mandibular second and third molars, root canal therapy was done for the third molar extraorally, and the tooth was reimplanted into the extracted socket of second molar site. After one year, clinical and radiographic examination revealed satisfactory outcome with no signs or symptoms suggestive of pathology. In selected cases, autogenous tooth transplantation, even after complete root formation of the donor tooth, may be considered as a practical treatment alternative to conventional prosthetic rehabilitation or implant treatment.

Protraction of mandibular second and third molars into missing first molar spaces for a patient with an anterior open bite and anterior spacing.

PubMed

Baik, Un-Bong; Chun, Youn-Sic; Jung, Min-Ho; Sugawara, Junji

2012-06-01

In a young woman, aged 18 years 8 months, who had an anterior open bite and anterior spacing, the right and left mandibular first molar extraction spaces were closed by protraction of the second and third molars without reciprocal retraction of the incisors and the premolars. The amounts of protraction for the second molars were 12 mm on the right side and 11 mm on the left side. Two miniscrews were inserted into the mesiobuccal side of the edentulous spaces, and 2 more screws were inserted into the anterior sites after removing previous miniscrews. In addition, 4 miniscrews were inserted into the buccal and palatal sides between the first and second maxillary molars to intrude the maxillary posterior teeth, which had extruded into the missing mandibular spaces. Careful biomechanical consideration was used to prevent extrusion of the molars and worsening of the anterior open bite from protraction of the posterior teeth. Ultimately, the anterior open bite was corrected by both intrusion of the maxillary molars and extrusion of the maxillary anterior teeth. Excellent occlusion and correction of the anterior open bite were achieved without tipping, rotation of the posterior teeth, or other problems. The right mandibular third molar, which had been impacted at the beginning of treatment, erupted into the second molar space and functioned properly. At the 1-year follow-up examination, the patient had a slight anterior open bite, but closure of the first molar extraction spaces was well maintained. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Oxygen from Hydrogen Peroxide. A Safe Molar Volume-Molar Mass Experiment.

ERIC Educational Resources Information Center

Bedenbaugh, John H.; And Others

1988-01-01

Describes a molar volume-molar mass experiment for use in general chemistry laboratories. Gives background technical information, procedures for the titration of aqueous hydrogen peroxide with standard potassium permanganate and catalytic decomposition of hydrogen peroxide to produce oxygen, and a discussion of the results obtained in three…

Orthodontic uprighting of a horizontally impacted third molar and protraction of mandibular second and third molars into the missing first molar space for a patient with posterior crossbites.

PubMed

Baik, Un-Bong; Kim, Myung-Rae; Yoon, Kyu-Ho; Kook, Yoon-Ah; Park, Jae Hyun

2017-03-01

A 22-year-old woman came with a unilateral missing mandibular first molar and buccal crossbite. The open space was closed by protraction of the mandibular left second molar and uprighting and protraction of the horizontally impacted third molar using temporary skeletal anchorage devices, and her buccal crossbite was corrected with modified palatal and lingual appliances. The total active treatment time was 36 months. Posttreatment records after 9 months showed excellent results with a stable occlusion. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gholipur, Reza, E-mail: gholipur.reza@gmail.com; Bahari, Ali, E-mail: a.bahari@umz.ac.ir

Highlights: • Glassy Ce{sub x}La{sub 1−x}O{sub y} nanostructure films were grown on Si(1 0 0) substrate using the sol–gel method. • G{sub p} = ωϵ{sub 0}ϵ′ tan(δ) was calculated at different temperatures. • Electrical and structural the Ce{sub x}La{sub 1−x}O{sub y} samples were studied. • The conductivity-temperature study shows that the compound obeys the Arrhenius law. - Abstract: The Ce{sub x}La{sub 1−x}O{sub y} samples are synthesized, characterized and their electrical properties are reported at different molar ratios in the frequency range of 10{sup −1}–10{sup +5} Hz. Ac conductivity and permittivity data are analyzed by using conductivity formalism. The values ofmore » capacitance and tan(δ) were recorded with respect to different frequencies and temperatures. X-ray diffraction (XRD) patterns of the films show that the films posses crystalline phases. Surface morphology of the films is analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses reveal that elemental composition is in right stoichiometry. Electrical characterizations of the Ce{sub x}La{sub 1−x}O{sub y} samples were done by capacitance–voltage (C–V) and current density–voltage (J–V) measurements of MOS structures. Investigation showed high value of k = 44.80 and low leakage current (∼1 × 10{sup −5} A/cm{sup 2}) of the Ce{sub 0.4}La{sub 0.6}O{sub y} film.« less

A simple way to intrude overerupted upper second molars with miniscrews.

PubMed

Cao, Yang; Liu, Chufeng; Wang, Chunxian; Yang, Xiaoyu; Duan, Peijia; Xu, Chenrong

2013-12-01

Various methods of using skeletal anchorage for the intrusion of overerupted maxillary molars have been reported; however, it is difficult to intrude the overerupted upper second molars because of the low bone density in the region of the tuberosity. This article illustrates a new treatment method using partial fixed edgewise appliances and miniscrews to intrude the overerupted upper second molars. The miniscrews were applied to reinforce the anchorage of the upper first molar. The intrusive force was generated by the Ni-Ti wire. The clinical results showed a significant intrusion effect without root resorption or periodontal problems. This report demonstrates that the combination of partial conventional fixed appliances with miniscrews is a simple and effective treatment option to intrude overerupted upper second molars, especially in situations where miniscrews cannot be inserted directly next to the second molar. © 2013 by the American College of Prosthodontists.

Absorption of nickel, chromium, and iron by the root surface of primary molars covered with stainless steel crowns.

PubMed

Keinan, David; Mass, Eliyahu; Zilberman, Uri

2010-01-01

Objective. The purpose of this study was to analyze the absorption of metal ions released from stainless steel crowns by root surface of primary molars. Study Design. Laboratory research: The study included 34 primary molars, exfoliated or extracted during routine dental treatment. 17 molars were covered with stainless-steel crowns for more than two years and compared to 17 intact primary molars. Chemical content of the mesial or distal root surface, 1 mm apically to the crown or the cemento-enamel junction (CEJ), was analyzed. An energy dispersive X-ray spectrometer (EDS) was used for chemical analysis. Results. Higher amounts of nickel, chromium, and iron (5-6 times) were found in the cementum of molars covered with stainless-steel crowns compared to intact molars. The differences between groups were highly significant (P < .001). Significance. Stainless-steel crowns release nickel, chromium, and iron in oral environment, and the ions are absorbed by the primary molars roots. The additional burden of allergenic metals should be reduced if possible.

Morphometric variation of extant platyrrhine molars: taxonomic implications for fossil platyrrhines

PubMed Central

Nova Delgado, Mónica; Galbany, Jordi

2016-01-01

The phylogenetic position of many fossil platyrrhines with respect to extant ones is not yet clear. Two main hypotheses have been proposed: the layered or successive radiations hypothesis suggests that Patagonian fossils are Middle Miocene stem platyrrhines lacking modern descendants, whereas the long lineage hypothesis argues for an evolutionary continuity of all fossil platyrrhines with the extant ones. Our geometric morphometric analysis of a 15 landmark-based configuration of platyrrhines’ first and second lower molars suggest that morphological stasis may explain the reduced molar shape variation observed. Platyrrhine lower molar shape might be a primitive retention of the ancestral state affected by strong ecological constraints throughout the radiation of the main platyrrhine families. The Patagonian fossil specimens showed two distinct morphological patterns of lower molars, Callicebus—like and Saguinus—like, which might be the precursors of the extant forms, whereas the Middle Miocene specimens, though showing morphological resemblances with the Patagonian fossils, also displayed new, derived molar patterns, Alouatta—like and Pitheciinae—like, thereby suggesting that despite the overall morphological stasis of molars, phenotypic diversification of molar shape was already settled during the Middle Miocene. PMID:27190704

Staging of third molar development in relation to chronological age of 5-16 year old Indian children.

PubMed

Hegde, Sapna; Patodia, Akash; Dixit, Uma

2016-12-01

The usefulness of the developmental status of the third molar has been studied in assessment of the chronological age of adolescents in whom the development of the other permanent teeth is nearly complete. However, little is known about the timing and pattern of third-molar development in the Indian population. This study aimed to stage the third molar development in relation to chronological age of 5-16year old Indian children. In this cross-sectional observational study, the status of third molar development in relation to chronological age of 1139 Indian children aged 5-16 years was evaluated radiographically, using Orhan's modification of Demirjian's method. The frequency of occurrence of the third molars varied from 47% to 70%. Crypt formation, crown completion and root completion occurred as early as 5.4, 8.7 and 15.0 years, respectively. No significant differences based on gender or side were observed in third-molar development (p>0.05). For most stages, maxillary third molars were slightly more advanced than their mandibular counterparts (p>0.05). Considering the high degree of variability observed in third molar genesis and development, the usefulness of this tooth in age determination studies may be very limited in the age group studied. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Three-dimensional analysis of third molar development to estimate age of majority.

PubMed

Márquez-Ruiz, Ana Belén; Treviño-Tijerina, María Concepción; González-Herrera, Lucas; Sánchez, Belén; González-Ramírez, Amanda Rocío; Valenzuela, Aurora

2017-09-01

Third molars are one of the few biological markers available for age estimation in undocumented juveniles close the legal age of majority, assuming an age of 18years as the most frequent legal demarcation between child and adult status. To obtain more accurate visualization and evaluation of third molar mineralization patterns from computed tomography images, a new software application, DentaVol©, was developed. Third molar mineralization according to qualitative (Demirjian's maturational stage) and quantitative parameters (third molar volume) of dental development was assessed in multi-slice helical computed tomography images of both maxillary arches displayed by DentaVol© from 135 individuals (62 females and 73 males) aged between 14 and 23years. Intra- and inter-observer agreement values were remarkably high for both evaluation procedures and for all third molars. A linear correlation between third molar mineralization and chronological age was found, with third molar maturity occurring earlier in males than in females. Assessment of dental development with both procedures, by using DentaVol© software, can be considered a good indicator of age of majority (18years or older) in all third molars. Our results indicated that virtual computed tomography imaging can be considered a valid alternative to orthopantomography for evaluations of third molar mineralization, and therefore a complementary tool for determining the age of majority. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

Radiographic assessment of lower third molar eruption in different anteroposterior skeletal patterns and age-related groups.

PubMed

Jakovljevic, Aleksandar; Lazic, Emira; Soldatovic, Ivan; Nedeljkovic, Nenad; Andric, Miroslav

2015-07-01

To analyze radiographic predictors for lower third molar eruption among subjects with different anteroposterior skeletal relations and of different age groups. In total, 300 lower third molars were recorded on diagnostic digital orthopantomograms (DPTs) and lateral cephalograms (LCs). The radiographs were grouped according to sagittal intermaxillary angle (ANB), subject age, and level of lower third molar eruption. The DPT was used to analyze retromolar space, mesiodistal crown width, space/width ratio, third and second molar angulation (α, γ), third molar inclination (β), and gonion angle. The LC was used to determine ANB, angles of maxillar and mandibular prognathism (SNA, SNB), mandibular plane angle (SN/MP), and mandibular lengths. A logistic regression model was created using the statistically significant predictors. The logistic regression analysis revealed a statistically significant impact of β angle and distance between gonion and gnathion (Go-Gn) on the level of lower third molar eruption (P < .001 and P < .015, respectively). The retromolar space was significantly increased in the adult subgroup for all skeletal classes. The lower third molar impaction rate was significantly higher in the adult subgroup with the Class II (62.3%) compared with Class III subjects (31.7%; P < .013). The most favorable values of linear and angular predictors of mandibular third molar eruption were measured in Class III subjects. For valid estimation of mandibular third molar eruption, certain linear and angular measures (β angle, Go-Gn), as well as the size of the retromolar space, need to be considered.

Cone-beam computed tomography as advanced diagnostic aid in endodontic treatment of molars with multiple canals: Two case reports

PubMed Central

Kamble, Amit Pralhad; Pawar, Rohini Rangarao; Mattigatti, Sudha; Mangala, T. M.; Makandar, Saleem

2017-01-01

The purpose of these case reports is to emphasize the importance of knowledge regarding the root canal morphology and current diagnostic aids one should have as both of these important factors going to affect the prognosis of the endodontic treatment. These two case reports describe the maxillary and mandibular first molars with multiple canals. After clinical and radiographic diagnosis, additional help of cone-beam computed tomography (CBCT) of mandibular molar has been taken to evaluate the morphology and canal pattern; while maxillary molar was evaluated using CBCT scan to evaluate the canal configuration and obturation. In CBCT evaluation, the mandibular molar was diagnosed with six separated canals with three mesial and three distal canals and with radix paramolaris and radix entomolaris. The maxillary molar had five canals with three mesiobuccal (MB) canals. Both molars were instrumented with conventional hand and rotary file systems and obturated by conventional lateral compaction method. The axial images from CBCT show Vertucci Type VIII canal pattern in both roots of first mandibular molars and in MB root of maxillary first molar Sert and Bayirli Type XVIII canal configuration and no accessory canal in distobuccal and palatal root. With the recent innovations in diagnostic and operating aids, we can come across many variations in the root canal morphology of both mandibular and maxillary teeth, especially multi-rooted one (i.e., molars), and the knowledge of which leads to successful endodontic treatment with an excellent prognosis. PMID:29259367

Efficacy of amoxicillin and amoxicillin/clavulanic acid in the prevention of infection and dry socket after third molar extraction. A systematic review and meta-analysis.

PubMed

Arteagoitia, M-I; Barbier, L; Santamaría, J; Santamaría, G; Ramos, E

2016-07-01

Prophylactic use of amoxicillin and amoxicillin/clavulanic acid, although controversial, is common in routine clinical practice in third molar surgery. Our objective was to assess the efficacy of prophylactic amoxicillin with or without clavulanic acid in reducing the incidence of dry socket and/or infection after third molar extraction. We conducted a systematic review and meta-analysis consulting electronic databases and references in retrieved articles. We included double-blind placebo-controlled randomized clinical trials published up to June 2015 investigating the efficacy of amoxicillin with or without clavulanic acid on the incidence of the aforementioned conditions after third molar extraction. Relative risks (RRs) were estimated with a generic inverse-variance approach and a random effect model using Stata/IC 13 and Review Manager Version 5.2. Stratified analysis was performed by antibiotic type. We included 10 papers in the qualitative review and in the quantitative synthesis (1997 extractions: 1072 in experimental groups and 925 in controls, with 27 and 74 events of dry socket and/or infection, respectively). The overall RR was 0.350 (p<0.001; 95% CI 0.214 to 0.574). We found no evidence of heterogeneity (I2=0%, p=0.470). The number needed to treat was 18 (95% CI 13 to 29). Five studies reported adverse reactions (RR=1.188, 95% CI 0.658 to 2.146, p =0.567). The RRs were 0.563 for amoxicillin (95% CI 0.295 to 1.08, p=0.082) and 0.215 for amoxicillin/clavulanic acid (95% CI 0.117 to 0.395, p<0.001). Prophylactic use of amoxicillin does not significantly reduce the risk of infection and/or dry socket after third molar extraction. With amoxicillin/clavulanic acid, the risk decreases significantly. Nevertheless, considering the number needed to treat, low prevalence of infection, potential adverse reactions to antibiotics and lack of serious complications in placebo groups, the routine prescription of amoxicillin with or without clavulanic acid is not justified.

Characterization of stem and progenitor cells in the dental pulp of erupted and unerupted murine molars

PubMed Central

Balic, Anamaria; Aguila, H. Leonardo; Caimano, Melissa J.; Francone, Victor P.; Mina, Mina

2010-01-01

In the past few years there have been significant advances in the identification of putative stem cells also referred to as “mesenchymal stem cells” (MSC) in dental tissues including the dental pulp. It is thought that MSC in dental pulp share certain similarities with MSC isolated from other tissues. However, cells in dental pulp are still poorly characterized. This study focused on the characterization of progenitor and stem cells in dental pulps of erupted and unerupted mice molars. Our study showed that dental pulps from unerupted molars contain a significant number of cells expressing CD90+/CD45-, CD117+/CD45-, Sca-1+/CD45- and little if any CD45+ cells. Our in vitro functional studies showed that dental pulp cells from unerupted molars displayed extensive osteo-dentinogenic potential but were unable to differentiate into chondrocytes and adipocytes. Dental pulp from erupted molars displayed a reduced number of cells, contained higher percentage of CD45+ and lower percentage of cells expressing CD90+/CD45-, CD117+/CD45- as compared to unerupted molars. In vitro functional assays demonstrated the ability of a small fraction of cells to differentiate into odontoblasts, osteoblasts, adipocytes and chondrocytes. There was a significant reduction in the osteo-dentinogenic potential of the pulp cells derived from erupted molars compared to unerupted molars. Furthermore, the adipogenic and chondrogenic differentiation of pulp cells from erupted molars was dependent on a long induction period and infrequent. Based on these findings we propose that the dental pulp of the erupted molars contain a small population of multipotent cells, whereas the dental pulp of the unerupted molars does not contain multipotent cells but is enriched in osteo-dentinogenic progenitors engaged in the formation of coronal and radicular odontoblasts. PMID:20193787

Evolution of the hypercarnivorous dentition in mammals (Metatheria, Eutheria) and its bearing on the development of tribosphenic molars.

PubMed

Solé, Floréal; Ladevèze, Sandrine

2017-03-01

One major innovation of mammals is the tribosphenic molar, characterized by the evolution of a neomorphic upper cusp (=protocone) and a lower basin (=talonid) that occlude and provide shearing and crushing functions. This type of molar is an evolutionarily flexible structure that enabled mammals to achieve complex dental adaptations. Among carnivorous mammals, hypercarnivory is a common trend that evolved several times among therians (marsupials, placentals, and stem relatives). Hypercarnivory involves an important simplification of the carnassial molar pattern from the ancestral tribosphenic molar pattern, with the modification of the triangular tooth crown, and the loss of several cusps and cuspids typical of the tribosphenic molar. These losses confer to the molars of the hypercarnivorous mammals a plesiomorphic/paedomorphic morphology that resembles more the earliest mammaliaforms than the earliest therians. Here, we demonstrate that the modification of the molar morphology is fully explained by a patterning cascade mode of cusp development. Contrary to what was previously proposed, our study concludes that the metaconid (mesiolingual cusp of lower molars, associated with a puncturing function) does not influence cusp development of the talonid (distal crushing heel of lower molars). Moreover, it provides a new example of how heterochronic changes were crucial to the evolution of mammal dentition. To overcome the difficulty of applying behavioral or ecological definitions of diets to fossil animals, we characterize hypercarnivorous dentitions on the basis of the molar morphology and more particularly on the loss or retention of crushing structures, each dentition resulting from adaptations to a distinct ecomorphotype. Despite repeated and convergent evolution of hypercarnivorous forms, hypercarnivory appears as a highly constrained specialization (i.e., "dead end") that is unlikely to evolve back to omnivorous dentition, especially when the crushing structures are lost. © 2017 Wiley Periodicals, Inc.

Dietary Inference from Upper and Lower Molar Morphology in Platyrrhine Primates

PubMed Central

Allen, Kari L.; Cooke, Siobhán B.; Gonzales, Lauren A.; Kay, Richard F.

2015-01-01

The correlation between diet and dental topography is of importance to paleontologists seeking to diagnose ecological adaptations in extinct taxa. Although the subject is well represented in the literature, few studies directly compare methods or evaluate dietary signals conveyed by both upper and lower molars. Here, we address this gap in our knowledge by comparing the efficacy of three measures of functional morphology for classifying an ecologically diverse sample of thirteen medium- to large-bodied platyrrhines by diet category (e.g., folivore, frugivore, hard object feeder). We used Shearing Quotient (SQ), an index derived from linear measurements of molar cutting edges and two indices of crown surface topography, Occlusal Relief (OR) and Relief Index (RFI). Using SQ, OR, and RFI, individuals were then classified by dietary category using Discriminate Function Analysis. Both upper and lower molar variables produce high classification rates in assigning individuals to diet categories, but lower molars are consistently more successful. SQs yield the highest classification rates. RFI and OR generally perform above chance. Upper molar RFI has a success rate below the level of chance. Adding molar length enhances the discriminatory power for all variables. We conclude that upper molar SQs are useful for dietary reconstruction, especially when combined with body size information. Additionally, we find that among our sample of platyrrhines, SQ remains the strongest predictor of diet, while RFI is less useful at signaling dietary differences in absence of body size information. The study demonstrates new ways for inferring the diets of extinct platyrrhine primates when both upper and lower molars are available, or, for taxa known only from upper molars. The techniques are useful in reconstructing diet in stem representatives of anthropoid clade, who share key aspects of molar morphology with extant platyrrhines. PMID:25738266

Rapid Palatal Expansion in the absence of posterior cross-bite to intercept maxillary incisor crowding in the mixed dentition: a CBCT evaluation of spontaneous changes of untouched permanent molars.

PubMed

Rosa, M; Lucchi, P; Manti, G; Caprioglio, A

2016-12-01

The aim of this study was to investigate the reaction of untouched permanent molars following RPE, anchored on deciduous teeth in the early mixed dentition, aimed to solve maxillary anterior crowding in the absence of posterior cross-bite. A prospective clinical trial comprised 35 consecutive patients (20 males and 15 females) treated by the same orthodontist (MR). All patients showed crowding of the upper permanent incisors in the early mixed dentition in the absence of posterior cross-bite. RPE was anchored on second deciduous molars and on the deciduous canines. CBCT was taken before and after the removal of the RPE appliance. The transverse linear changes in width and the variation in the torque of the permanent molars were measured in the coronal plane. Relief of incisor crowding was found in all patients. The transverse width between permanent molars increased significantly. The apices of the upper permanent molars spontaneously expanded more than the crowns, while the opposite happened on the lower permanent molars. Moreover, the untouched upper permanent molars spontaneously uprighted palatally, while the lower permanent molars spontaneously uprighted buccally. The variation in the torque of the permanent molars mirrored transverse normal growth. In the early mixed dentition and in the absence of posterior cross-bite, it is possible to expand transversally the palate while uprighting the upper permanent molars in the opposite direction. RPE anchored on the deciduous teeth in the early mixed dentition, in the absence of posterior cross-bite, provides an "anticipation of transverse growth" and could be indicated to expand the anterior portion of the maxillary arch perimeter to solve upper incisor crowding.

Root and Canal Morphology of Mandibular Molars in a Selected Iranian Population Using Cone-Beam Computed Tomography

PubMed Central

Madani, Zahra Sadat; Mehraban, Nika; Moudi, Ehsan; Bijani, Ali

2017-01-01

Introduction: The aim of this study was to evaluate the root canal morphology of mandibular first and second molars using cone-beam computed tomography (CBCT) in northern Iranian population and also to indicate the thinnest area around root canals. Methods and Materials: We evaluated CBCT images of 154 first molars and 147 second molars. By evaluating three axial, sagittal and coronal planes of each tooth we determined the number of root canals, prevalence of C-shaped Melton types, and prevalence of Vertucci configuration and inter orifice distance. Also the minimum wall thickness of root canals was determined by measuring buccal, lingual, distal and mesial wall thicknesses of each canal in levels with 2 mm intervals from apex to orifice. Results: Amongst 154 first mandibular molars, 149 (96.7%) had two roots, 3 (1.9%) had three roots and 2 (1.2%) had C-shaped root configuration. Of 147 second mandibular molars, 120 (81.6%) had two roots, 1 (0.6%) had three roots and 26 (17.6%) had C-shaped roots. There was no significant difference in the prevalence of Vertucci’s type between two genders. The most common configuration in mesial roots of first and second molars were type IV (57%-42.9%) and type II (31.5%-28%). Mesial and distal walls had the most frequency as the thinnest wall in all levels of root canals with mostly less than 1 mm thickness. In second molars the DB-DL inter orifice distance and in first molars the MB-ML distance were the minimum. MB-D in first molars had the maximum distance while ML-DL, MB-DB and ML-D had the same and maximum distance in second molars. Conclusion: Vertucci’s type IV and type I were the most prevalent configurations in mesial and distal roots of first and second mandibular molars and the thickness of thinnest area around the canals should be considered during endodontic treatments. PMID:28512476

Effectiveness of a personalized device in the evaluation of mandibular second molar periodontal healing after surgical extraction of adjacent third molar

PubMed Central

Pippi, Roberto

2013-01-01

Summary Aim The primary aim of the present study was to validate the effectiveness of a personalized device able to guide periodontal probing in evaluation of second molar periodontal healing after adjacent third molar surgical extraction. Secondarily, the study analyzed if any patient and tooth related factors affected the second molar periodontal healing as well as if they were able to affect the periodontal probing depth performed with or without the personalized device. Materials and methods Thirty-five lower second molars were evaluated after extraction of the adjacent third molar. Pre-operative as well as 3 and 12 month post-operative probing depths of the distal surface of the second molar were evaluated. All measurements were taken by two different methods: standard two-point and four-point probing using a personalized onlay-type guide. Periapical radiographs were also evaluated. The Pearson product moment and the general linear model with backward stepwise procedure were used for inferential statistics. Results The mean 12-month post-operative probing depth/mean pre-operative probing depth ratio obtained with the guided probing method showed a highly significant effect on the 12-month radiographic post-operative/pre-operative radiographic measure ratio. None of the examined patient- or tooth-related factors showed a significant effect on pre-operative/12-month post-operative radiographic measure ratio. Conclusions The use of the proposed personalized device seems to provide a more reliable estimate of second molar periodontal healing after adjacent third molar surgical extraction. No patient-or tooth-related factors seem to be able to affect either second molar periodontal healing or probing depth measures obtained with or without the personalized device in individuals younger than 25 years old. It can be therefore recommended that lower third molar surgical extraction be performed in young adults. PMID:24611086

Effect of removing an impacted mandibular third molar on the periodontal status of the mandibular second molar.

PubMed

Montero, Javier; Mazzaglia, Giuseppe

2011-11-01

The aim of this study was to evaluate the change in the periodontal status of mandibular second molars after surgical extraction of adjacent impacted lower third molars. The study was based on a 1-year follow-up of 48 patients (20 men and 28 women) recruited consecutively after the extraction of an impacted lower third molar. Panoramic radiographs were obtained and clinical examinations were carried out at baseline to determine the periodontal status (probing depth and dental plaque and gingival indices) both for the second molar and for the 4 posterior sextants. After surgical removal of the impacted mandibular third molars, all patients were assessed at 3, 6, 9, and 12 months for changes in periodontal status. The periodontal health of the second molar was found to improve gradually after third molar surgery in all clinical parameters. Probing depth was gradually reduced by about 0.6 mm quarterly, until a final depth of 2.6 ± 0.8 mm was attained. The relative risk of having a plaque index and gingival index coded as 0 (healthy) or 1 (minor problems) was about 10 times higher at the end of the follow-up than at baseline for both indices. The periodontal status of the 4 posterior sextants also improved gradually. Molar depth, according to the Pell and Gregory classes and types, seemed to be the main factor modulating both the baseline probing depth and the change in probing depth during follow-up. Our results suggest that the initial periodontal breakdown established on the distal surfaces of the second molars and in the periodontal health of the 4 posterior sextants can be significantly improved 1 year after surgical removal of the ipsilateral lower third molar. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

The influence of third molars in the line of mandibular angle fractures on wound and bone healing.

PubMed

Ulbrich, N; Ettl, T; Waiss, W; Gosau, M; Moralis, A; Reichert, T E; Mueller, S

2016-07-01

The objective of this study was to evaluate postoperative complications after removal or retention of the third molar in the line of mandibular angle fractures. This retrospective study included the data of 98 patients with a molar in the line of a mandibular angle fracture treated with internal reduction and mini-plate fixation at our department over 9 years. Patients were classified into two groups: tooth removal during osteosynthesis (n = 45) and tooth retention (n = 55). The primary target criterion was the incidence of minor (outpatient treatment, local measures) and major (surgical revision, rehospitalisation) complications. Time between trauma and surgery was 1.4 days (range 0 to 12), and the average follow-up 291 days (range 66 to 863). Regarding the eruption status, 26 of 52 (50.0 %) impacted third molars, 11 of 19 (57.9 %) incompletely erupted and 8 of 27 (29.6 %) completely erupted molars had been removed during open reduction. Overall, 17 (17.3 %) patients had postoperative minor (n = 7) or major (n = 10) complications, in detail 10/45 (22.0 %) patients after tooth removal and 7/55 (13 %) patients after tooth retention (p = 0.286). Complication rates between impacted and incompletely erupted third molars (impacted molars 15.0 %, incompletely erupted molars 10.0 %) did not differ significantly, but completely erupted molars had a complication rate of 26.0 %. Mandibular angle fractures with a completely erupted third molar show the highest complication rate after open reduction and osteosynthesis. Retention of a non-infectious third molar facilitates open reduction and does not increase the complication risk. The study helps with the decision of removing or retention of a third molar during surgical treatment of a mandibular angle fracture.

Evaluation of maxillary molar distalization with the distal jet: a comparison with other contemporary methods.

PubMed

Bolla, Eugenio; Muratore, Filippo; Carano, Aldo; Bowman, S Jay

2002-10-01

Maxillary molar distalization is an increasingly popular option for the resolution of Class II malocclusions. This communication describes the effects of one particular molar distalizing appliance, the distal jet, in a sample of 20 consecutively treated and growing subjects (11 females, nine males; mean starting age of 13) and compares these effects with those of similar devices. Pre- and postdistalization cephalometric radiographs and dental models were analyzed to determine the dental and skeletal effects. The distal jet appliances were constructed using a biomechanical couple to direct the distalizing force to the level of the maxillary first molar's center of resistance. The distal jet was the only appliance used during the distalization phase of treatment. Examination of the cephalometric tracings demonstrated that the crowns of the maxillary first molars were distalized an average of 3.2 mm into a Class I molar relationship. In the process, the first molars were tipped distally an average of 3.1 degrees, however, the amount of tipping in each case was influenced by the state of eruption of the second molar. In subjects whose second molars had erupted only to the level of the apical third of the first molar roots, distal tipping was almost twice that seen when the second molar had completed their eruption. Anchorage loss measured at the first premolars averaged 1.3 mm, but the crowns tipped 3.1 degrees distally because of the design of the appliance. The maxillary incisors were proclined an average of 0.6 degrees with minimal effect on the mandibular plane angle and lower facial height. This study suggests that the distal jet appliance effectively moves the maxillary molars distally into a Class I molar relationship with minimal distal tipping, however, some loss of anchorage is to be expected during this process. The distal jet appliance compares favorably with other intraoral distalization devices and with mechanics featuring mandibular protraction for the resolution of patients with Class II, despite the fact that these types of mechanics address different jaws.