A Graphical User Interface for the Low Cost Combat Direction System

DTIC Science & Technology

1991-09-16

the same tasks. These shipboard tasks, which include contact management , moving geometry calculations, intelligence compila- tion, area plotting and...Display Defaults Analysis This category covers a wide range of required data input and system configuration issues. To keep the screen display manageable ...parts or dialog boxes. The implementation of an Ada application using STARS is quite straightforward, although knowlede of X Protocol primitives is

Insulator (Heat and Frost). Occupational Analyses Series.

ERIC Educational Resources Information Center

McRory, Aline; Ally, Mohamed

This analysis covers tasks performed by an insulator, an occupational title some provinces and territories of Canada have also identified as heat and frost insulator. A guide to analysis discusses development, structure, and validation method; scope of the occupation; trends; and safety. To facilitate understanding the nature of the occupation,…

Twentieth Annual Conference on Manual Control, Volume 2

NASA Technical Reports Server (NTRS)

Hart, S. G. (Compiler); Hartzell, E. J. (Compiler)

1984-01-01

Volume II contains thirty two complete manuscripts and five abstracts. The topics covered include the application of event-related brain potential analysis to operational problems, the subjective evaluation of workload, mental models, training, crew interaction analysis, multiple task performance, and the measurement of workload and performance in simulation.

Truck and Transport Mechanic. Occupational Analyses Series.

ERIC Educational Resources Information Center

McRory, Aline; Ally, Mohamed

This analysis covers tasks performed by a truck and transport mechanic, an occupational title some provinces and territories of Canada have also identified as commercial transport vehicle mechanic; transport truck mechanic; truck and coach technician; and truck and transport service technician. A guide to analysis discusses development, structure,…

Novel Composites for Wing and Fuselage Applications

NASA Technical Reports Server (NTRS)

Suarez, J. A.; Buttitta, C.

1996-01-01

Design development was successfully completed for textile preforms with continuous cross-stiffened epoxy panels with cut-outs. The preforms developed included 3-D angle interlock weaving of graphite structural fibers impregnated by resin film infiltration (RFI) and shown to be structurally suitable under conditions requiring minimum acquisition costs. Design guidelines/analysis methodology for such textile structures are given. The development was expanded to a fuselage side-panel component of a subsonic commercial airframe and found to be readily scalable. The successfully manufactured panel was delivered to NASA Langley for biaxial testing. This report covers the work performed under Task 3 -- Cross-Stiffened Subcomponent; Task 4 -- Design Guidelines/Analysis of Textile-Reinforced Composites; and Task 5 -- Integrally Woven Fuselage Panel.

Georgetown University Integrated Community Energy System (GU-ICES). Phase III, Stage I. Feasibility analysis. Final report. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This Feasibility Analysis covers a wide range of studies and evaluations. The Report is divided into five parts. Section 1 contains all material relating to the Institutional Assessment including consideration of the requirements and position of the Potomac Electric Co. as they relate to cogeneration at Georgetown in parallel with the utility (Task 1). Sections 2 through 7 contain all technical information relating to the Alternative Subsystems Analysis (Task 4). This includes the energy demand profiles upon which the evaluations were based (Task 3). It further includes the results of the Life-Cycle-Cost Analyses (Task 5) which are developed in detailmore » in the Appendix for evaluation in the Technical Report. Also included is the material relating to Incremental Savings and Optimization (Task 6) and the Conceptual Design for candidate alternate subsystems (Task 7). Section 8 contains all material relating to the Environmental Impact Assessment (Task 2). The Appendix contains supplementary material including the budget cost estimates used in the life-cycle-cost analyses, the basic assumptions upon which the life-cycle analyses were developed, and the detailed life-cycle-cost anlysis for each subsystem considered in detail.« less

Introduction to Personnel Management: Participants' Manual.

ERIC Educational Resources Information Center

Civil Service Commission, Denver, CO. Regional Training Center.

This manual for the introductory Federal personnel management course covers: major personnel laws and sources of information; position classification (standards and task analysis); staffing and placement (competitive appointments, temporary appointments/promotions, recruitment, and noncompetitive actions); merit promotion; qualification standards;…

Visual Experience Enhances Infants' Use of Task-Relevant Information in an Action Task

ERIC Educational Resources Information Center

Wang, Su-hua; Kohne, Lisa

2007-01-01

Four experiments examined whether infants' use of task-relevant information in an action task could be facilitated by visual experience in the laboratory. Twelve- but not 9-month-old infants spontaneously used height information and chose an appropriate (taller) cover in search of a hidden tall toy. After watching examples of covering events in a…

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles : Task 7 : final report : thesis.

DOT National Transportation Integrated Search

2015-05-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 7, Final Report - Thesis. : This final report covers Tasks 1, 2, 3, 5 ...

Investigating the Potential of Deep Neural Networks for Large-Scale Classification of Very High Resolution Satellite Images

NASA Astrophysics Data System (ADS)

Postadjian, T.; Le Bris, A.; Sahbi, H.; Mallet, C.

2017-05-01

Semantic classification is a core remote sensing task as it provides the fundamental input for land-cover map generation. The very recent literature has shown the superior performance of deep convolutional neural networks (DCNN) for many classification tasks including the automatic analysis of Very High Spatial Resolution (VHR) geospatial images. Most of the recent initiatives have focused on very high discrimination capacity combined with accurate object boundary retrieval. Therefore, current architectures are perfectly tailored for urban areas over restricted areas but not designed for large-scale purposes. This paper presents an end-to-end automatic processing chain, based on DCNNs, that aims at performing large-scale classification of VHR satellite images (here SPOT 6/7). Since this work assesses, through various experiments, the potential of DCNNs for country-scale VHR land-cover map generation, a simple yet effective architecture is proposed, efficiently discriminating the main classes of interest (namely buildings, roads, water, crops, vegetated areas) by exploiting existing VHR land-cover maps for training.

Instructional Design: System Strategies.

ERIC Educational Resources Information Center

Ledford, Bruce R.; Sleeman, Phillip J.

This book is intended as a source for those who desire to apply a coherent system of instructional design, thereby insuring accountability. Chapter 1 covers the instructional design process, including: instructional technology; the role of evaluation; goal setting; the psychology of teaching and learning; task analysis; operational objectives;…

Review of Department of Defense Education Activity (DoDEA) Schools. Volume II: Quantitative Analysis of Educational Quality. IDA Paper.

ERIC Educational Resources Information Center

Anderson, Lowell Bruce; Bracken, Jerome; Bracken, Marilyn C.

This volume compiles, and presents in integrated form, the Institute for Defense Analyses' (IDA) quantitative analysis of educational quality provided by the Department of Defense's dependent schools. It covers the quantitative aspects of volume 1 in greater detail and presents some analyses deemed too technical for that volume. The first task in…

Participation in High Energy Physics at the University of Chicago

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinec, Emil J.

2013-06-27

This report covers research at the University of Chicago in theoretical high energy physics and its connections to cosmology, over the period Nov. 1, 2009 to April 30, 2013. This research is divided broadly into two tasks: Task A, which covers a broad array of topics in high energy physics; and task C, primarily concerned with cosmology.

Artificial Neural Network Analysis System

DTIC Science & Technology

2001-02-27

Contract No. DASG60-00-M-0201 Purchase request no.: Foot in the Door-01 Title Name: Artificial Neural Network Analysis System Company: Atlantic... Artificial Neural Network Analysis System 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Powell, Bruce C 5d. PROJECT NUMBER 5e. TASK NUMBER...34) 27-02-2001 Report Type N/A Dates Covered (from... to) ("DD MON YYYY") 28-10-2000 27-02-2001 Title and Subtitle Artificial Neural Network Analysis

Air Vehicles Division Computational Structural Analysis Facilities Policy and Guidelines for Users

DTIC Science & Technology

2005-05-01

34 Thermal " as appropriate and the tolerance set to "default". b) Create the model geometry. c) Create the finite elements. d) Create the...linear, non-linear, dynamic, thermal , acoustic analysis. The modelling of composite materials, creep, fatigue and plasticity are also covered...perform professional, high quality finite element analysis (FEA). FE analysts from many tasks within AVD are using the facilities to conduct FEA with

The Role of Research in Making Interactive Products Effective.

ERIC Educational Resources Information Center

Rossi, Robert J.

1986-01-01

Argues that research and development (R&D) methods should be utilized to develop new technologies for training and retailing and describes useful research tools--critical incident methodology, task analysis, performance recording. Discussion covers R&D applications to interactive systems development in the areas of product need, customer…

Development of LANDSAT Derived Forest Cover Information for Integration into Adirondack Park GIS

NASA Technical Reports Server (NTRS)

Curran, R. P.; Banta, J. S.

1982-01-01

Based upon observed changes in timber harvest practices partially attributable to forest biomass removable for energy supply purposes, the Adirondack Park Agency began in 1979 a multi-year project to implement a digital geographic information system (GIS). An initial developmental task was an inventory of forest cover information and analysis of forest resource change and availability. While developing the GIS, a pilot project was undertaken to evaluate the usefulness of LANDSAT derived land cover information for this purpose, and to explore the integration of LANDSAT data into the GIS. The prototype LANDSAT analysis project involved: (1) the use of both recent and historic data to derive land cover information for two dates; and (2) comparison of land cover over time to determine quantitative and geographic changes. The "recent data," 1978 full foliage data over portions of four LANDSAT scenes, was classified, using ground truth derived training samples in various forested and non-forested categories. Forested categories include the following: northern hardwoods, pine, spruce-fir, and pine plantation, while nonforested categories include wet-conifer, pasture, grassland, urban, exposed soil, agriculture, and water.

GRASP/Ada: Graphical Representations of Algorithms, Structures, and Processes for Ada. The development of a program analysis environment for Ada: Reverse engineering tools for Ada, task 2, phase 3

NASA Technical Reports Server (NTRS)

Cross, James H., II

1991-01-01

The main objective is the investigation, formulation, and generation of graphical representations of algorithms, structures, and processes for Ada (GRASP/Ada). The presented task, in which various graphical representations that can be extracted or generated from source code are described and categorized, is focused on reverse engineering. The following subject areas are covered: the system model; control structure diagram generator; object oriented design diagram generator; user interface; and the GRASP library.

Performance on a stage IV object-permanence task with standard and nonstandard covers.

PubMed

Rader, N; Spiro, D J; Firestone, P B

1979-09-01

Piaget's description of object concept development is based on success in performing a series of search tasks. However, failure to perform successfully may result from undeveloped aspects of the cognitive or motor system unrelated to a concept of objects. This study examined the role of perceptual-motor development in a typical Stage IV task by comparing performance given a standard cloth cover or a small card cover. Subjects were 10 infants 147--187 days old (median age = 160 days). A pass was defined as the retrieval of the toy within 30 sec on 2 out of 3 trials. The difference in performance between the 2 cover conditions was significant (p = .032). These results advise caution in interpreting Stage IV performance in terms of a developing object concept.

49 CFR 192.809 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of individuals performing covered tasks by October 28, 2002. (c) Work performance history review may be used as a sole evaluation method for individuals who were performing a covered task prior to October 26, 1999. (d) After October 28, 2002, work performance history may not be used as a sole...

49 CFR 195.509 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... state agency. (b) Operators must complete the qualification of individuals performing covered tasks by October 28, 2002. (c) Work performance history review may be used as a sole evaluation method for individuals who were performing a covered task prior to October 26, 1999. (d) After October 28, 2002, work...

High energy physics at UC Riverside

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-07-01

This report discusses progress made for the following two tasks: experimental high energy physics, Task A, and theoretical high energy physics, Task B. Task A1 covers hadron collider physics. Information for Task A1 includes: personnel/talks/publications; D0: proton-antiproton interactions at 2 TeV; SDC: proton-proton interactions at 40 TeV; computing facilities; equipment needs; and budget notes. The physics program of Task A2 has been the systematic study of leptons and hadrons. Information covered for Task A2 includes: personnel/talks/publications; OPAL at LEP; OPAL at LEP200; CMS at LHC; the RD5 experiment; LSND at LAMPF; and budget notes. The research activities of the Theorymore » Group are briefly discussed and a list of completed or published papers for this period is given.« less

Determinants of linear judgment: a meta-analysis of lens model studies.

PubMed

Karelaia, Natalia; Hogarth, Robin M

2008-05-01

The mathematical representation of E. Brunswik's (1952) lens model has been used extensively to study human judgment and provides a unique opportunity to conduct a meta-analysis of studies that covers roughly 5 decades. Specifically, the authors analyzed statistics of the "lens model equation" (L. R. Tucker, 1964) associated with 249 different task environments obtained from 86 articles. On average, fairly high levels of judgmental achievement were found, and people were seen to be capable of achieving similar levels of cognitive performance in noisy and predictable environments. Further, the effects of task characteristics that influence judgment (numbers and types of cues, inter-cue redundancy, function forms and cue weights in the ecology, laboratory versus field studies, and experience with the task) were identified and estimated. A detailed analysis of learning studies revealed that the most effective form of feedback was information about the task. The authors also analyzed empirically under what conditions the application of bootstrapping--or replacing judges by their linear models--is advantageous. Finally, the authors note shortcomings of the kinds of studies conducted to date, limitations in the lens model methodology, and possibilities for future research. (Copyright) 2008 APA, all rights reserved.

Conjoint analysis applications in health--a checklist: a report of the ISPOR Good Research Practices for Conjoint Analysis Task Force.

PubMed

Bridges, John F P; Hauber, A Brett; Marshall, Deborah; Lloyd, Andrew; Prosser, Lisa A; Regier, Dean A; Johnson, F Reed; Mauskopf, Josephine

2011-06-01

The application of conjoint analysis (including discrete-choice experiments and other multiattribute stated-preference methods) in health has increased rapidly over the past decade. A wider acceptance of these methods is limited by an absence of consensus-based methodological standards. The International Society for Pharmacoeconomics and Outcomes Research (ISPOR) Good Research Practices for Conjoint Analysis Task Force was established to identify good research practices for conjoint-analysis applications in health. The task force met regularly to identify the important steps in a conjoint analysis, to discuss good research practices for conjoint analysis, and to develop and refine the key criteria for identifying good research practices. ISPOR members contributed to this process through an extensive consultation process. A final consensus meeting was held to revise the article using these comments, and those of a number of international reviewers. Task force findings are presented as a 10-item checklist covering: 1) research question; 2) attributes and levels; 3) construction of tasks; 4) experimental design; 5) preference elicitation; 6) instrument design; 7) data-collection plan; 8) statistical analyses; 9) results and conclusions; and 10) study presentation. A primary question relating to each of the 10 items is posed, and three sub-questions examine finer issues within items. Although the checklist should not be interpreted as endorsing any specific methodological approach to conjoint analysis, it can facilitate future training activities and discussions of good research practices for the application of conjoint-analysis methods in health care studies. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Modeling Personnel Turnover in the Parametric Organization

NASA Technical Reports Server (NTRS)

Dean, Edwin B.

1991-01-01

A primary issue in organizing a new parametric cost analysis function is to determine the skill mix and number of personnel required. The skill mix can be obtained by a functional decomposition of the tasks required within the organization and a matrixed correlation with educational or experience backgrounds. The number of personnel is a function of the skills required to cover all tasks, personnel skill background and cross training, the intensity of the workload for each task, migration through various tasks by personnel along a career path, personnel hiring limitations imposed by management and the applicant marketplace, personnel training limitations imposed by management and personnel capability, and the rate at which personnel leave the organization for whatever reason. Faced with the task of relating all of these organizational facets in order to grow a parametric cost analysis (PCA) organization from scratch, it was decided that a dynamic model was required in order to account for the obvious dynamics of the forming organization. The challenge was to create such a simple model which would be credible during all phases of organizational development. The model development process was broken down into the activities of determining the tasks required for PCA, determining the skills required for each PCA task, determining the skills available in the applicant marketplace, determining the structure of the dynamic model, implementing the dynamic model, and testing the dynamic model.

NASA upper atmosphere research program: Research summaries, 1990 - 1991. Report to the Congress and the Environmental Protection Agency

NASA Technical Reports Server (NTRS)

1992-01-01

The objectives, status, and accomplishments of the research tasks supported under the NASA Upper Atmosphere Research Program (UARP) are presented. The topics covered include the following: balloon-borne in situ measurements; balloon-borne remote measurements; ground-based measurements; aircraft-borne measurements; rocket-borne measurements; instrument development; reaction kinetics and photochemistry; spectroscopy; stratospheric dynamics and related analysis; stratospheric chemistry, analysis, and related modeling; and global chemical modeling.

An efficient liner cooling scheme for advanced small gas turbine combustors

NASA Technical Reports Server (NTRS)

Paskin, Marc D.; Mongia, Hukam C.; Acosta, Waldo A.

1993-01-01

A joint Army/NASA program was conducted to design, fabricate, and test an advanced, small gas turbine, reverse-flow combustor utilizing a compliant metal/ceramic (CMC) wall cooling concept. The objectives of this effort were to develop a design method (basic design data base and analysis) for the CMC cooling technique and then demonstrate its application to an advanced cycle, small, reverse-flow combustor with 3000 F burner outlet temperature. The CMC concept offers significant improvements in wall cooling effectiveness resulting in a large reduction in cooling air requirements. Therefore, more air is available for control of burner outlet temperature pattern in addition to the benefits of improved efficiency, reduced emissions, and lower smoke levels. The program was divided into four tasks. Task 1 defined component materials and localized design of the composite wall structure in conjunction with development of basic design models for the analysis of flow and heat transfer through the wall. Task 2 included implementation of the selected materials and validated design models during combustor preliminary design. Detail design of the selected combustor concept and its refinement with 3D aerothermal analysis were completed in Task 3. Task 4 covered detail drawings, process development and fabrication, and a series of burner rig tests. The purpose of this paper is to provide details of the investigation into the fundamental flow and heat transfer characteristics of the CMC wall structure as well as implementation of the fundamental analysis method for full-scale combustor design.

Progeny testing: proceedings of servicewide genetics workshop

Treesearch

Dick Miller

1984-01-01

The primary objective of this workshop was to discuss in detail the state- of-the-art of progeny testing. All aspects, from setting objectives through data collection and analysis, was be covered. We all know progeny testing is a highly technical phase of our tree improvement programs. Each task is critical and must be performed accurately and within a prescribed time...

DOE Office of Scientific and Technical Information (OSTI.GOV)

T. Nakamura; C.L. Senior

Most of the anthropogenic emissions of carbon dioxide result from the combustion of fossil fuels for energy production. Photosynthesis has long been recognized as a means, at least in theory, to sequester anthropogenic carbon dioxide. Aquatic microalgae have been identified as fast growing species whose carbon fixing rates are higher than those of land-based plants by one order of magnitude. Physical Sciences Inc. (PSI), Aquasearch, and the Hawaii Natural Energy Institute at the University of Hawaii are jointly developing technologies for recovery and sequestration of CO{sub 2} from stationary combustion systems by photosynthesis of microalgae. The research is aimed primarilymore » at demonstrating the ability of selected species of microalgae to effectively fix carbon from typical power plant exhaust gases. This report covers the reporting period 1 October 2000 to 31 March 2005 in which PSI, Aquasearch and University of Hawaii conducted their tasks. This report discusses results of the work pertaining to five tasks: Task 1--Supply of CO2 from Power Plant Flue Gas to Photobioreactor; Task 2--Selection of Microalgae; Task 3--Optimization and Demonstration of Industrial Scale Photobioreactor; Task 4--Carbon Sequestration System Design; and Task 5--Economic Analysis. Based on the work conducted in each task summary conclusion is presented.« less

Research on the use of space resources

NASA Technical Reports Server (NTRS)

Carroll, W. F. (Editor)

1983-01-01

The second year of a multiyear research program on the processing and use of extraterrestrial resources is covered. The research tasks included: (1) silicate processing, (2) magma electrolysis, (3) vapor phase reduction, and (4) metals separation. Concomitant studies included: (1) energy systems, (2) transportation systems, (3) utilization analysis, and (4) resource exploration missions. Emphasis in fiscal year 1982 was placed on the magma electrolysis and vapor phase reduction processes (both analytical and experimental) for separation of oxygen and metals from lunar regolith. The early experimental work on magma electrolysis resulted in gram quantities of iron (mixed metals) and the identification of significant anode, cathode, and container problems. In the vapor phase reduction tasks a detailed analysis of various process concepts led to the selection of two specific processes designated as ""Vapor Separation'' and ""Selective Ionization.'' Experimental work was deferred to fiscal year 1983. In the Silicate Processing task a thermophysical model of the casting process was developed and used to study the effect of variations in material properties on the cooling behavior of lunar basalt.

Power Consumption Analysis of Operating Systems for Wireless Sensor Networks

PubMed Central

Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J.

2010-01-01

In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems—TinyOS v1.0, TinyOS v2.0, Mantis and Contiki—running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks. PMID:22219688

Power consumption analysis of operating systems for wireless sensor networks.

PubMed

Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J

2010-01-01

In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems--TinyOS v1.0, TinyOS v2.0, Mantis and Contiki--running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks.

Baseline Description and Analysis of the Operations Related to Warehouse Controlled Documents at the Navy Publications and Forms Center, Philadelphia, Pennsylvania. Volume I. Phase I.

DTIC Science & Technology

1980-03-06

performing the present NPFC tasks. Potential automation technologies may include order processing mechanization, demand printing from micrographic or...effort and documented in this volume included the following: a. Functional description of the order processing activities as they currently operate. b...covered under each analysis area. i It is obvious from the exhibit that the functional description of order processing operations was to include COG I

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

Multi-disciplinary optimization of aeroservoelastic systems

NASA Technical Reports Server (NTRS)

Karpel, Mordechay

1991-01-01

New methods were developed for efficient aeroservoelastic analysis and optimization. The main target was to develop a method for investigating large structural variations using a single set of modal coordinates. This task was accomplished by basing the structural modal coordinates on normal modes calculated with a set of fictitious masses loading the locations of anticipated structural changes. The following subject areas are covered: (1) modal coordinates for aeroelastic analysis with large local structural variations; and (2) time simulation of flutter with large stiffness changes.

Embodied simulation as part of affective evaluation processes: task dependence of valence concordant EMG activity.

PubMed

Weinreich, André; Funcke, Jakob Maria

2014-01-01

Drawing on recent findings, this study examines whether valence concordant electromyography (EMG) responses can be explained as an unconditional effect of mere stimulus processing or as somatosensory simulation driven by task-dependent processing strategies. While facial EMG over the Corrugator supercilii and the Zygomaticus major was measured, each participant performed two tasks with pictures of album covers. One task was an affective evaluation task and the other was to attribute the album covers to one of five decades. The Embodied Emotion Account predicts that valence concordant EMG is more likely to occur if the task necessitates a somatosensory simulation of the evaluative meaning of stimuli. Results support this prediction with regard to Corrugator supercilii in that valence concordant EMG activity was only present in the affective evaluation task but not in the non-evaluative task. Results for the Zygomaticus major were ambiguous. Our findings are in line with the view that EMG activity is an embodied part of the evaluation process and not a mere physical outcome.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rutherfoord, John; Toussaint, Doug; Sarcevic, Ina

The following pages describe the high energy physics program at the University of Arizona which was funded by DOE grant DE-FG03-95ER40906, for the period 1 February 1995 to 31 January 2004. In this report, emphasis was placed on more recent accomplishments. This grant was divided into two tasks, a theory task (Task A) and an experimental task (Task B but called Task C early in the grant period) with separate budgets. Faculty supported by this grant, for at least part of this period, include, for the theory task, Adrian Patrascioiu (now deceased), Ina Sarcevic, and Douglas Toussaint., and, for themore » experimental task, Elliott Cheu, Geoffrey Forden, Kenneth Johns, John Rutherfoord, Michael Shupe, and Erich Varnes. Grant monitors from the Germantown DOE office, overseeing our grant, changed over the years. Dr. Marvin Gettner covered the first years and then he retired from the DOE. Dr. Patrick Rapp worked with us for just a few years and then left for a position at the University of Puerto Rico. Dr. Kathleen Turner took his place and continues as our grant monitor. The next section of this report covers the activities of the theory task (Task A) and the last section the activities of the experimental task (Task B).« less

Research Activities in Support of High-Resolution Land Cover Mapping in the North Central United States

Treesearch

Dacia M. Meneguzzo; Greg C. Liknes

2015-01-01

The USDA Agroforestry Strategic Framework and the 2014 Farm Bill call for inventory and monitoring of agroforestry practices; however, collecting such data over very large non-forested areas is costly. The Forest Inventory and Analysis (FIA) program at the Northern Research Station has addressed this challenge by forming a targeted task team whose primary purpose is to...

Future applications of associative processor systems to operational KSC systems for optimizing cost and enhancing performance characteristics

NASA Technical Reports Server (NTRS)

Perkinson, J. A.

1974-01-01

The application of associative memory processor equipment to conventional host processors type systems is discussed. Efforts were made to demonstrate how such application relieves the task burden of conventional systems, and enhance system speed and efficiency. Data cover comparative theoretical performance analysis, demonstration of expanded growth capabilities, and demonstrations of actual hardware in simulated environment.

UAS Integration in the NAS Project Test Site Kick-off Meeting

NASA Technical Reports Server (NTRS)

Kopardekar, Parimal; Witzberger, Kevin; Hackenberg, Davis L.; Murphy, Jim

2015-01-01

This briefing was presented during the Test Site Kick Off Meeting to discuss the contract awards for Task 1 and Task 2. This briefing covered a high level overview for contract deliverables, Task 1 - UAS Traffic Management and Task 2, Live Virtual Constructive Distributed Environment.

Neural networks for structural design - An integrated system implementation

NASA Technical Reports Server (NTRS)

Berke, Laszlo; Hafez, Wassim; Pao, Yoh-Han

1992-01-01

The development of powerful automated procedures to aid the creative designer is becoming increasingly critical for complex design tasks. In the work described here Artificial Neural Nets are applied to acquire structural analysis and optimization domain expertise. Based on initial instructions from the user an automated procedure generates random instances of structural analysis and/or optimization 'experiences' that cover a desired domain. It extracts training patterns from the created instances, constructs and trains an appropriate network architecture and checks the accuracy of net predictions. The final product is a trained neural net that can estimate analysis and/or optimization results instantaneously.

Managing Large Scale Project Analysis Teams through a Web Accessible Database

NASA Technical Reports Server (NTRS)

O'Neil, Daniel A.

2008-01-01

Large scale space programs analyze thousands of requirements while mitigating safety, performance, schedule, and cost risks. These efforts involve a variety of roles with interdependent use cases and goals. For example, study managers and facilitators identify ground-rules and assumptions for a collection of studies required for a program or project milestone. Task leaders derive product requirements from the ground rules and assumptions and describe activities to produce needed analytical products. Disciplined specialists produce the specified products and load results into a file management system. Organizational and project managers provide the personnel and funds to conduct the tasks. Each role has responsibilities to establish information linkages and provide status reports to management. Projects conduct design and analysis cycles to refine designs to meet the requirements and implement risk mitigation plans. At the program level, integrated design and analysis cycles studies are conducted to eliminate every 'to-be-determined' and develop plans to mitigate every risk. At the agency level, strategic studies analyze different approaches to exploration architectures and campaigns. This paper describes a web-accessible database developed by NASA to coordinate and manage tasks at three organizational levels. Other topics in this paper cover integration technologies and techniques for process modeling and enterprise architectures.

Development of Management Metrics for Research and Technology

NASA Technical Reports Server (NTRS)

Sheskin, Theodore J.

2003-01-01

Professor Ted Sheskin from CSU will be tasked to research and investigate metrics that can be used to determine the technical progress for advanced development and research tasks. These metrics will be implemented in a software environment that hosts engineering design, analysis and management tools to be used to support power system and component research work at GRC. Professor Sheskin is an Industrial Engineer and has been involved in issues related to management of engineering tasks and will use his knowledge from this area to allow extrapolation into the research and technology management area. Over the course of the summer, Professor Sheskin will develop a bibliography of management papers covering current management methods that may be applicable to research management. At the completion of the summer work we expect to have him recommend a metric system to be reviewed prior to implementation in the software environment. This task has been discussed with Professor Sheskin and some review material has already been given to him.

Improving Running Times for the Determination of Fractional Snow-Covered Area from Landsat TM/ETM+ via Utilization of the CUDA® Programming Paradigm

NASA Astrophysics Data System (ADS)

McGibbney, L. J.; Rittger, K.; Painter, T. H.; Selkowitz, D.; Mattmann, C. A.; Ramirez, P.

2014-12-01

As part of a JPL-USGS collaboration to expand distribution of essential climate variables (ECV) to include on-demand fractional snow cover we describe our experience and implementation of a shift towards the use of NVIDIA's CUDA® parallel computing platform and programming model. In particular the on-demand aspect of this work involves the improvement (via faster processing and a reduction in overall running times) for determination of fractional snow-covered area (fSCA) from Landsat TM/ETM+. Our observations indicate that processing tasks associated with remote sensing including the Snow Covered Area and Grain Size Model (SCAG) when applied to MODIS or LANDSAT TM/ETM+ are computationally intensive processes. We believe the shift to the CUDA programming paradigm represents a significant improvement in the ability to more quickly assert the outcomes of such activities. We use the TMSCAG model as our subject to highlight this argument. We do this by describing how we can ingest a LANDSAT surface reflectance image (typically provided in HDF format), perform spectral mixture analysis to produce land cover fractions including snow, vegetation and rock/soil whilst greatly reducing running time for such tasks. Within the scope of this work we first document the original workflow used to assert fSCA for Landsat TM and it's primary shortcomings. We then introduce the logic and justification behind the switch to the CUDA paradigm for running single as well as batch jobs on the GPU in order to achieve parallel processing. Finally we share lessons learned from the implementation of myriad of existing algorithms to a single set of code in a single target language as well as benefits this ultimately provides scientists at the USGS.

DEVELOPMENT AND APPLICATION OF METHODS TO ASSESS HUMAN EXPOSURE TO PESTICIDES

EPA Science Inventory

Note: this task is schedule to end September 2003. Two tasks will take its place: method development for emerging pesticides including chiral chemistry applications, and in-house laboratory operations. Field sampling methods are covered under a new task proposed this year.
<...

Aerodynamic preliminary analysis system 2. Part 1: Theory

NASA Technical Reports Server (NTRS)

Bonner, E.; Clever, W.; Dunn, K.

1981-01-01

A subsonic/supersonic/hypersonic aerodynamic analysis was developed by integrating the Aerodynamic Preliminary Analysis System (APAS), and the inviscid force calculation modules of the Hypersonic Arbitrary Body Program. APAS analysis was extended for nonlinear vortex forces using a generalization of the Polhamus analogy. The interactive system provides appropriate aerodynamic models for a single input geometry data base and has a run/output format similar to a wind tunnel test program. The user's manual was organized to cover the principle system activities of a typical application, geometric input/editing, aerodynamic evaluation, and post analysis review/display. Sample sessions are included to illustrate the specific task involved and are followed by a comprehensive command/subcommand dictionary used to operate the system.

48 CFR 1852.232-81 - Contract funding.

Code of Federal Regulations, 2010 CFR

2010-10-01

... allotment is for [Insert applicable item number(s), task(s), or work description] _____ and covers the following estimated period of performance: _____. (b) An additional amount of $______ is obligated under...

High dimensional land cover inference using remotely sensed modis data

NASA Astrophysics Data System (ADS)

Glanz, Hunter S.

Image segmentation persists as a major statistical problem, with the volume and complexity of data expanding alongside new technologies. Land cover classification, one of the most studied problems in Remote Sensing, provides an important example of image segmentation whose needs transcend the choice of a particular classification method. That is, the challenges associated with land cover classification pervade the analysis process from data pre-processing to estimation of a final land cover map. Many of the same challenges also plague the task of land cover change detection. Multispectral, multitemporal data with inherent spatial relationships have hardly received adequate treatment due to the large size of the data and the presence of missing values. In this work we propose a novel, concerted application of methods which provide a unified way to estimate model parameters, impute missing data, reduce dimensionality, classify land cover, and detect land cover changes. This comprehensive analysis adopts a Bayesian approach which incorporates prior knowledge to improve the interpretability, efficiency, and versatility of land cover classification and change detection. We explore a parsimonious, parametric model that allows for a natural application of principal components analysis to isolate important spectral characteristics while preserving temporal information. Moreover, it allows us to impute missing data and estimate parameters via expectation-maximization (EM). A significant byproduct of our framework includes a suite of training data assessment tools. To classify land cover, we employ a spanning tree approximation to a lattice Potts prior to incorporate spatial relationships in a judicious way and more efficiently access the posterior distribution of pixel labels. We then achieve exact inference of the labels via the centroid estimator. To detect land cover changes, we develop a new EM algorithm based on the same parametric model. We perform simulation studies to validate our models and methods, and conduct an extensive continental scale case study using MODIS data. The results show that we successfully classify land cover and recover the spatial patterns present in large scale data. Application of our change point method to an area in the Amazon successfully identifies the progression of deforestation through portions of the region.

Risk assessment of maintenance operations: the analysis of performing task and accident mechanism.

PubMed

Carrillo-Castrillo, Jesús A; Rubio-Romero, Juan Carlos; Guadix, Jose; Onieva, Luis

2015-01-01

Maintenance operations cover a great number of occupations. Most small and medium-sized enterprises lack the appropriate information to conduct risk assessments of maintenance operations. The objective of this research is to provide a method based on the concepts of task and accident mechanisms for an initial risk assessment by taking into consideration the prevalence and severity of the maintenance accidents reported. Data were gathered from 11,190 reported accidents in maintenance operations in the manufacturing sector of Andalusia from 2003 to 2012. By using a semi-quantitative methodology, likelihood and severity were evaluated based on the actual distribution of accident mechanisms in each of the tasks. Accident mechanisms and tasks were identified by using those variables included in the European Statistics of Accidents at Work methodology. As main results, the estimated risk of the most frequent accident mechanisms identified for each of the analysed tasks is low and the only accident mechanisms with medium risk are accidents when lifting or pushing with physical stress on the musculoskeletal system in tasks involving carrying, and impacts against objects after slipping or stumbling for tasks involving movements. The prioritisation of public preventive actions for the accident mechanisms with a higher estimated risk is highly recommended.

Conceptual design of advanced central receiver power systems sodium-cooled receiver concept. Volume 1. Executive summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

The conceptual design of an advanced central receiver power system using liquid sodium as a heat transport medium has been completed by a team consisting of the Energy Systems Group (prime contractor), McDonnell Douglas, Stearns-Roger, The University of Houston, and Salt River Project. The purpose of this study was to determine the technical and economic advantages of this concept for commercial-scale power plants. This final report covers all tasks of the project. These tasks were as follows: (1) review and analysis of preliminary specification; (2) parametric analysis; (3) select commercial configuration; (4) commercial plant conceptual design; (5) assessment of commercialmore » plant; (6) advanced central receiver power system development plan; (7) program plan; (8) reports and data; (9) program management; and (10) safety analysis. A programmatic overview of the accomplishments of this program is given. The 100-MW conceptual commercial plant, the 281-MW optimum plant, and the 10-MW pilot plant are described. (WHK)« less

Applied Meteorology Unit (AMU) Quarterly Report Fourth Quarter FY-04

NASA Technical Reports Server (NTRS)

Bauman, William; Wheeler, Mark; Lambert, Winifred; Case, Jonathan; Short, David

2004-01-01

This report summarizes the Applied Meteorology Unit (A MU) activities for the fourth quarter of Fiscal Year 2004 (July -Sept 2004). Tasks covered are: (1) Objective Lightning Probability Forecast: Phase I, (2) Severe Weather Forecast Decision Aid, (3) Hail Index, (4) Shuttle Ascent Camera Cloud Obstruction Forecast, (5) Advanced Regional Prediction System (ARPS) Optimization and Training Extension and (5) User Control Interface for ARPS Data Analysis System (ADAS) Data Ingest.

SHC Project 3.63, Task 2, Beneficial Use of Waste Materials

EPA Science Inventory

SHC Project 3.63, Task 2, “Beneficial Use of Waste Materials”, is designed to conduct research and analyses to characterize and quantify the risks and benefits of using or reusing waste materials. There are 6 primary research areas in Task 2 that cover a broad spectr...

An expert system shell for inferring vegetation characteristics: Changes to the historical cover type database (Task F)

NASA Technical Reports Server (NTRS)

1993-01-01

All the options in the NASA VEGetation Workbench (VEG) make use of a database of historical cover types. This database contains results from experiments by scientists on a wide variety of different cover types. The learning system uses the database to provide positive and negative training examples of classes that enable it to learn distinguishing features between classes of vegetation. All the other VEG options use the database to estimate the error bounds involved in the results obtained when various analysis techniques are applied to the sample of cover type data that is being studied. In the previous version of VEG, the historical cover type database was stored as part of the VEG knowledge base. This database was removed from the knowledge base. It is now stored as a series of flat files that are external to VEG. An interface between VEG and these files was provided. The interface allows the user to select which files of historical data to use. The files are then read, and the data are stored in Knowledge Engineering Environment (KEE) units using the same organization of units as in the previous version of VEG. The interface also allows the user to delete some or all of the historical database units from VEG and load new historical data from a file. This report summarizes the use of the historical cover type database in VEG. It then describes the new interface to the files containing the historical data. It describes minor changes that were made to VEG to enable the externally stored database to be used. Test runs to test the operation of the new interface and also to test the operation of VEG using historical data loaded from external files are described. Task F was completed. A Sun cartridge tape containing the KEE and Common Lisp code for the new interface and the modified version of the VEG knowledge base was delivered to the NASA GSFC technical representative.

Human Factors in Aeronautics at NASA

NASA Technical Reports Server (NTRS)

Mogford, Richard

2016-01-01

This is a briefing to a regularly meeting DoD group called the Human Systems Community of Interest: Mission Effectiveness. I was asked to address human factors in aeronautics at NASA. (Exploration (space) human factors has apparently already been covered.) The briefing describes human factors organizations at NASA Ames and Langley. It then summarizes some aeronautics tasks that involve the application of human factors in the development of specific tools and capabilities. The tasks covered include aircrew checklists, dispatch operations, Playbook, Dynamic Weather Routes, Traffic Aware Strategic Aircrew Requests, and Airplane State Awareness and Prediction Technologies. I mention that most of our aeronautics work involves human factors as embedded in development tasks rather than basic research.

Comparative Anatomy of Maintenance Tasks (CAMT): A Feasibility Study

DTIC Science & Technology

1992-03-01

systems. Methods for task primitive definition were developed, then taken into the field for testing . Task primitives were defined to cover three remove...engine maintenance) and to test whether task primitives developed for one weapon system could have applicability to other weapon systems (Phase 2...requirements, levying MPT constraints and predicting MPT requirements are only ritualistic exercises until the operational test and evaluation of a

Parts Counterperson. Auto, Agriculture & Truck. Task List Competency Record.

ERIC Educational Resources Information Center

Minnesota Instructional Materials Center, White Bear Lake.

Developed by industry representatives and educators for use by vocational instructors, this guide focuses on the tasks and competencies necessary for a student to develop in order to secure employment as a counterperson in automobile, agriculture, and truck parts. The task list is an outline of various skills and proficiencies and covers sales,…

Brick and Stone Masonry Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This task list is intended for use in planning and/or evaluating a competency-based course in brick and stone masonry. The tasks required for 15 different duties performed by bricklayers and 13 different duties typically performed by rocklayers are outlined. The following bricklaying duties are covered: estimating materials for and laying out a…

Applications of artificial intelligence to mission planning

NASA Technical Reports Server (NTRS)

Ford, Donnie R.; Floyd, Stephen A.; Rogers, John S.

1990-01-01

The following subject areas are covered: object-oriented programming task; rule-based programming task; algorithms for resource allocation; connecting a Symbolics to a VAX; FORTRAN from Lisp; trees and forest task; software data structure conversion; software functionality modifications and enhancements; portability of resource allocation to a TI MicroExplorer; frontier of feasibility software system; and conclusions.

An Analysis of U.S. Army Unmanned Ground Vehicle Strategy

DTIC Science & Technology

2012-07-28

submitted in partial fulfillment of the requirements of the Senior Service College Fellowship. The views expressed in this student academic research paper ...THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 28-07-2012 2. REPORT TYPE Civilian Research Paper 3. DATES COVERED (From - To) 4. TITLE AND...AUTHOR(S) COL Glenn Baca, U.S. Army 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S

48 CFR 2052.211-71 - Technical progress report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... investigator, the contract period of performance, and the period covered by the report. Each report must include the following for each discrete task/task order: (a) A listing of the efforts completed during the...

FTS evolution

NASA Technical Reports Server (NTRS)

Provost, David E.

1990-01-01

Viewgraphs on flight telerobotic servicer evolution are presented. Topics covered include: paths for FTS evolution; frequently performed actions; primary task states; EPS radiator panel installation; generic task definitions; path planning; non-contact alignment; contact planning and control; and human operator interface.

NBS (National Bureau of Standards): Materials measurements

NASA Technical Reports Server (NTRS)

Manning, J. R.

1985-01-01

NBS work for NASA in support of NASA's Microgravity Science and Applications Program under NASA Government Order H-27954B (Properties of Electronic Materials) covering the period April 1, 1984 to March 31, 1985 is described. The work has been carried out in three independent tasks: Task 1--Surface Tensions and Their Variations with Temperature and Impurities; Task 2--Convention during Unidirectional Solidification; Task 3--Measurement of High Temperature Thermodynamic Properties. The results for each task are given separately in the body of the report.

Support of the Laboratory for Terrestrial Physics for Dynamics of the Solid Earth (DOSE)

NASA Technical Reports Server (NTRS)

Vandenberg, Nancy R.; Ma, C. (Technical Monitor)

2001-01-01

This final report summarizes the accomplishments during the contract period. Under the contract NVI, Inc. provided support to the VLBI group at NASA's Goddard Space Flight Center. The contract covered a period of approximately eight years during which geodetic and astrometric VLBI evolved through several major changes. This report is divided into four sections which correspond to major task areas in the contract: A) Coordination and Scheduling, B) Field System, C) Station Support, and D) Analysis and Research and Development.

Support for the Laboratory for Terrestrial Physics for Dynamics of the Solid Earth (DOSE)

NASA Technical Reports Server (NTRS)

Ma, C. (Technical Monitor)

2001-01-01

This final report summarizes the accomplishments during the contract period. Under the contract NVI, Inc. provided support to the VLBI group at NASA's Goddard Space Flight Center. The contract covered a period of approximately eight years during which geodetic and astrometric VLBI evolved through several major changes. This report is divided into four sections which correspond to major task areas in the contract: A) Coordination and Scheduling, B) Field System, C) Station Support, and D) Analysis and Research and Development.

Health Occupations Cluster.

ERIC Educational Resources Information Center

Walraven, Catherine; And Others

These instructional materials consist of a series of curriculum worksheets that cover tasks to be mastered by students in health occupations cluster programs. Covered in the curriculum worksheets are diagnostic procedures; observing/recording/reporting/planning; safety; nutrition/elimination; hygiene/personal care/comfort;…

Disruption of self-organized actions in monkeys with progressive MPTP-induced parkinsonism. I. Effects of task complexity.

PubMed

Pessiglione, Mathias; Guehl, Dominique; Hirsch, Etienne C; Féger, Jean; Tremblay, Léon

2004-01-01

Parkinson's disease (PD) is characterized by motor symptoms, usually accompanied by cognitive deficits. The question addressed in this study is whether complexity of routine actions can exacerbate parkinsonian disorders that are often considered to be motor symptoms. To examine this question, we trained four vervet monkeys (Cercopithecus aethiops) to perform three multiple-choice retrieval tasks. In order of ascending complexity, rewards were freely available (task 1), covered with transparent sliding plaques (task 2), and covered with opaque sliding plaques cued by symbols (task 3). Thus, from task 1 to task 2 we added a motor difficulty--the recall of context-adapted movement; and from task 2 to task 3 we added a cognitive difficulty: the recall of symbol-reward associations. The more complex the task, the longer it took to learn, but after extensive training the performance was stable in all tasks, with similar retrieval durations. The monkeys then received systemic 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) injections (0.3-0.4 mg/kg) every 4-7 days, until the first motor symptoms appeared. In the course of MPTP intoxication, the behavioural performance declined while the motor symptoms were absent or mild--the retrieval duration increased, and non-initiated choices and hesitations between choices became frequent. Interestingly, this decline was in proportion to task complexity, and was particularly pronounced with the cognitive difficulty. Furthermore, freezing appeared only with the cognitive difficulty. We therefore suggest that everyday cognitive difficulties may exacerbate hypokinesia (lack of initiation, abnormal slowness) and executive disorders (hesitations, freezing) in the early stages of human PD.

Node, Node-Link, and Node-Link-Group Diagrams: An Evaluation.

PubMed

Saket, Bahador; Simonetto, Paolo; Kobourov, Stephen; Börner, Katy

2014-12-01

Effectively showing the relationships between objects in a dataset is one of the main tasks in information visualization. Typically there is a well-defined notion of distance between pairs of objects, and traditional approaches such as principal component analysis or multi-dimensional scaling are used to place the objects as points in 2D space, so that similar objects are close to each other. In another typical setting, the dataset is visualized as a network graph, where related nodes are connected by links. More recently, datasets are also visualized as maps, where in addition to nodes and links, there is an explicit representation of groups and clusters. We consider these three Techniques, characterized by a progressive increase of the amount of encoded information: node diagrams, node-link diagrams and node-link-group diagrams. We assess these three types of diagrams with a controlled experiment that covers nine different tasks falling broadly in three categories: node-based tasks, network-based tasks and group-based tasks. Our findings indicate that adding links, or links and group representations, does not negatively impact performance (time and accuracy) of node-based tasks. Similarly, adding group representations does not negatively impact the performance of network-based tasks. Node-link-group diagrams outperform the others on group-based tasks. These conclusions contradict results in other studies, in similar but subtly different settings. Taken together, however, such results can have significant implications for the design of standard and domain snecific visualizations tools.

Developing learning community model with soft skill integration for the building engineering apprenticeship programme in vocational high school

NASA Astrophysics Data System (ADS)

Sutrisno, Dardiri, Ahmad; Sugandi, R. Machmud

2017-09-01

This study aimed to address the procedure, effectiveness, and problems in the implementation of learning model for Building Engineering Apprenticeship Training Programme. This study was carried out through survey method and experiment. The data were collected using questionnaire, test, and assessment sheet. The collected data were examined through description, t-test, and covariance analysis. The results of the study showed that (1) the model's procedure covered preparation course, readiness assessment, assignment distribution, handing over students to apprenticeship instructors, task completion, assisting, field assessment, report writing, and follow-up examination, (2) the Learning Community model could significantly improve students' active learning, but not improve students' hard skills and soft skills, and (3) the problems emerging in the implementation of the model were (1) students' difficulties in finding apprenticeship places and qualified instructors, and asking for relevant tasks, (2) teachers' difficulties in determining relevant tasks and monitoring students, and (3) apprenticeship instructors' difficulties in assigning, monitoring, and assessing students.

Applications of flight control system methods to an advanced combat rotorcraft

NASA Technical Reports Server (NTRS)

Tischler, Mark B.; Fletcher, Jay W.; Morris, Patrick M.; Tucker, George T.

1989-01-01

Advanced flight control system design, analysis, and testing methodologies developed at the Ames Research Center are applied in an analytical and flight test evaluation of the Advanced Digital Optical Control System (ADOCS) demonstrator. The primary objectives are to describe the knowledge gained about the implications of digital flight control system design for rotorcraft, and to illustrate the analysis of the resulting handling-qualities in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered in-depth are digital flight control design and analysis methods, flight testing techniques, ADOCS handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the ADOCS demonstrator indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time-delays (exceeding 240 m sec in all axes). Piloted handling-qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks; but handling-qualities are inadequate for ultra-high gain tasks such as slope and running landings.

Earth mapping - aerial or satellite imagery comparative analysis

NASA Astrophysics Data System (ADS)

Fotev, Svetlin; Jordanov, Dimitar; Lukarski, Hristo

Nowadays, solving the tasks for revision of existing map products and creation of new maps requires making a choice of the land cover image source. The issue of the effectiveness and cost of the usage of aerial mapping systems versus the efficiency and cost of very-high resolution satellite imagery is topical [1, 2, 3, 4]. The price of any remotely sensed image depends on the product (panchromatic or multispectral), resolution, processing level, scale, urgency of task and on whether the needed image is available in the archive or has to be requested. The purpose of the present work is: to make a comparative analysis between the two approaches for mapping the Earth having in mind two parameters: quality and cost. To suggest an approach for selection of the map information sources - airplane-based or spacecraft-based imaging systems with very-high spatial resolution. Two cases are considered: area that equals approximately one satellite scene and area that equals approximately the territory of Bulgaria.

Terminal Area Productivity Airport Wind Analysis and Chicago O'Hare Model Description

NASA Technical Reports Server (NTRS)

Hemm, Robert; Shapiro, Gerald

1998-01-01

This paper describes two results from a continuing effort to provide accurate cost-benefit analyses of the NASA Terminal Area Productivity (TAP) program technologies. Previous tasks have developed airport capacity and delay models and completed preliminary cost benefit estimates for TAP technologies at 10 U.S. airports. This task covers two improvements to the capacity and delay models. The first improvement is the completion of a detailed model set for the Chicago O'Hare (ORD) airport. Previous analyses used a more general model to estimate the benefits for ORD. This paper contains a description of the model details with results corresponding to current conditions. The second improvement is the development of specific wind speed and direction criteria for use in the delay models to predict when the Aircraft Vortex Spacing System (AVOSS) will allow use of reduced landing separations. This paper includes a description of the criteria and an estimate of AVOSS utility for 10 airports based on analysis of 35 years of weather data.

Numerical algorithm for optimization of positive electrode in lead-acid batteries

NASA Astrophysics Data System (ADS)

Murariu, Ancuta Teodora; Buimaga-Iarinca, Luiza; Morari, Cristian

2017-12-01

The positive electrode in lead-acid batteries is one of the most sensitive parts of the whole battery, since it is affected by various aggresive chemical processes during its life. Therefore, an optimal design of the positive electrode of the battery may have as efect a dramatic improvement of the properties of the battery - such as total capacity or endurance during its life. Our efforts dedicated to this goal cover a range of rather complex tasks, from the design based on numerical analysis to statistic analysis. We present the structure of the software implementation and the results obtained for three types of positive electrodes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hallenbeck, L.D.; Harpole, K.J.; Gerard, M.G.

The work reported here covers Budget Phase I of the project. The principal tasks in Budget Phase I are the Reservoir Analysis and Characterization Task and the Advanced Technology Definition Task. Completion of these tasks have enabled an optimum carbon dioxide (CO{sub 2}) flood project to be designed and evaluated from an economic and risk analysis standpoint. Field implementation of the project has been recommended to the working interest owner of the South Cowden Unit (SCU) and approval has been obtained. The current project has focused on reducing initial investment cost by utilizing horizontal injection wells and concentrating the projectmore » in the best productivity area of the field. An innovative CO{sub 2} purchase agreement (no take or pay requirements, CO{sub 2} purchase price tied to West Texas Intermediate crude oil price) and gas recycle agreements (expensing cost as opposed to large capital investments for compression) were negotiated to further improve project economics. A detailed reservoir characterization study was completed by an integrated team of geoscientists and engineers. The study consisted of detailed core description, integration of log response to core descriptions, mapping of the major flow units, evaluation of porosity and permeability relationships, geostatistical analysis of permeability trends, and direct integration of reservoir performance with the geological interpretation. The study methodology fostered iterative bidirectional feedback between the reservoir characterization team and the reservoir engineering/simulation team to allow simultaneous refinement and convergence of the geological interpretation with the reservoir model. The fundamental conclusion from the study is that South Cowden exhibits favorable enhanced oil recovery characteristics, particularly reservoir quality and continuity.« less

Heavy vehicle driver workload assessment. Task 6, baseline data study

DOT National Transportation Integrated Search

This report covers the sixth in a series of tasks involving the assessment of driver workload in heavy vehicle operation associated with in-cab devices or systems. A review of the overall study was provided by Tijerina, Kantowitz, Kiger, and Rockwell...

Development of a Task-Exposure Matrix (TEM) for Pesticide Use (TEMPEST).

PubMed

Dick, F D; Semple, S E; van Tongeren, M; Miller, B G; Ritchie, P; Sherriff, D; Cherrie, J W

2010-06-01

Pesticides have been associated with increased risks for a range of conditions including Parkinson's disease, but identifying the agents responsible has proven challenging. Improved pesticide exposure estimates would increase the power of epidemiological studies to detect such an association if one exists. Categories of pesticide use were identified from the tasks reported in a previous community-based case-control study in Scotland. Typical pesticides used in each task in each decade were identified from published scientific and grey literature and from expert interviews, with the number of potential agents collapsed into 10 groups of pesticides. A pesticide usage database was then created, using the task list and the typical pesticide groups employed in those tasks across seven decades spanning the period 1945-2005. Information about the method of application and concentration of pesticides used in these tasks was then incorporated into the database. A list was generated of 81 tasks involving pesticide exposure in Scotland covering seven decades producing a total of 846 task per pesticide per decade combinations. A Task-Exposure Matrix for PESTicides (TEMPEST) was produced by two occupational hygienists who quantified the likely probability and intensity of inhalation and dermal exposures for each pesticide group for a given use during each decade. TEMPEST provides a basis for assessing exposures to specific pesticide groups in Scotland covering the period 1945-2005. The methods used to develop TEMPEST could be used in a retrospective assessment of occupational exposure to pesticides for Scottish epidemiological studies or adapted for use in other countries.

Applying Behavior-Based Robotics Concepts to Telerobotic Use of Power Tooling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noakes, Mark W; Hamel, Dr. William R.

While it has long been recognized that telerobotics has potential advantages to reduce operator fatigue, to permit lower skilled operators to function as if they had higher skill levels, and to protect tools and manipulators from excessive forces during operation, relatively little laboratory research in telerobotics has actually been implemented in fielded systems. Much of this has to do with the complexity of the implementation and its lack of ability to operate in complex unstructured remote systems environments. One possible solution is to approach the tooling task using an adaptation of behavior-based techniques to facilitate task decomposition to a simplermore » perspective and to provide sensor registration to the task target object in the field. An approach derived from behavior-based concepts has been implemented to provide automated tool operation for a teleoperated manipulator system. The generic approach is adaptable to a wide range of typical remote tools used in hot-cell and decontamination and dismantlement-type operations. Two tasks are used in this work to test the validity of the concept. First, a reciprocating saw is used to cut a pipe. The second task is bolt removal from mockup process equipment. This paper explains the technique, its implementation, and covers experimental data, analysis of results, and suggestions for implementation on fielded systems.« less

Influence of malnutrition on cognitive development assessed by Piagetian tasks.

PubMed

Agarwal, D K; Upadhyay, S K; Agarwal, K N

1989-01-01

Cognitive development of 1336 children (6-8 yr) was studied in relation to their nutritional status. Seven Piagetian tasks covering the mental process of a concrete operational period were given to each child to assess the cognitive development. Weschler intelligence scale for Indian Children was used to assess the IQ of each child. The percentage of malnourished children in stage I of development (preoperational) was significantly higher as that of wellnourished children. A higher percentage of children in the latter group was in stage III of development (concrete operation). In boys performance on all the tasks was influenced by undernutrition except for class inclusion. In girls this was true only for conservation of liquid, substance and ordinal relation. The results of the regression analysis showed that nutrition was the only factor weakly associated with the poor performance of the children in various tasks. Further, the effect of nutrition was more pronounced in conservation tasks indicating poor verbal reasoning and comprehension in malnourished children. Information was also collected regarding the parental education and occupation, socio-economic status, caste, economic sufficiency, psychosocial stimulation and home environment. However, these environmental factors did not influence the development of rural children. This might be due to the fact that the population in the present study did not vary much with regard to these variables.

Autobody Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Idaho state curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction in auto body technology. Following a curriculum framework that explains major content, laboratory activities, and intended outcomes, the document lists all tasks covered in the curriculum. The bulk of the document consists of…

International Energy Agency (IEA): Implementing Agreement for Co-operation in the Research and Development of Wind Turbine Systems (IEA Wind)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinclair, Karin C

This fact sheet covers the work that is being done via the International Energy Agency Task 34 (WREN). The fact sheet highlights the objective, strategy, primary activities, members, and contacts for this task.

A Population of Assessment Tasks

ERIC Educational Resources Information Center

Daro, Phil; Burkhardt, Hugh

2012-01-01

We propose the development of a "population" of high-quality assessment tasks that cover the performance goals set out in the "Common Core State Standards for Mathematics." The population will be published. Tests are drawn from this population as a structured random sample guided by a "balancing algorithm."

High-spatial resolution multispectral and panchromatic satellite imagery for mapping perennial desert plants

NASA Astrophysics Data System (ADS)

Alsharrah, Saad A.; Bruce, David A.; Bouabid, Rachid; Somenahalli, Sekhar; Corcoran, Paul A.

2015-10-01

The use of remote sensing techniques to extract vegetation cover information for the assessment and monitoring of land degradation in arid environments has gained increased interest in recent years. However, such a task can be challenging, especially for medium-spatial resolution satellite sensors, due to soil background effects and the distribution and structure of perennial desert vegetation. In this study, we utilised Pleiades high-spatial resolution, multispectral (2m) and panchromatic (0.5m) imagery and focused on mapping small shrubs and low-lying trees using three classification techniques: 1) vegetation indices (VI) threshold analysis, 2) pre-built object-oriented image analysis (OBIA), and 3) a developed vegetation shadow model (VSM). We evaluated the success of each approach using a root of the sum of the squares (RSS) metric, which incorporated field data as control and three error metrics relating to commission, omission, and percent cover. Results showed that optimum VI performers returned good vegetation cover estimates at certain thresholds, but failed to accurately map the distribution of the desert plants. Using the pre-built IMAGINE Objective OBIA approach, we improved the vegetation distribution mapping accuracy, but this came at the cost of over classification, similar to results of lowering VI thresholds. We further introduced the VSM which takes into account shadow for further refining vegetation cover classification derived from VI. The results showed significant improvements in vegetation cover and distribution accuracy compared to the other techniques. We argue that the VSM approach using high-spatial resolution imagery provides a more accurate representation of desert landscape vegetation and should be considered in assessments of desertification.

Improved silicon nitride for advanced heat engines

NASA Technical Reports Server (NTRS)

Yeh, Hun C.; Fang, Ho T.

1987-01-01

The technology base required to fabricate silicon nitride components with the strength, reliability, and reproducibility necessary for actual heat engine applications is presented. Task 2 was set up to develop test bars with high Weibull slope and greater high temperature strength, and to conduct an initial net shape component fabrication evaluation. Screening experiments were performed in Task 7 on advanced materials and processing for input to Task 2. The technical efforts performed in the second year of a 5-yr program are covered. The first iteration of Task 2 was completed as planned. Two half-replicated, fractional factorial (2 sup 5), statistically designed matrix experiments were conducted. These experiments have identified Denka 9FW Si3N4 as an alternate raw material to GTE SN502 Si3N4 for subsequent process evaluation. A detailed statistical analysis was conducted to correlate processing conditions with as-processed test bar properties. One processing condition produced a material with a 97 ksi average room temperature MOR (100 percent of goal) with 13.2 Weibull slope (83 percent of goal); another condition produced 86 ksi (6 percent over baseline) room temperature strength with a Weibull slope of 20 (125 percent of goal).

A globally complete map of supraglacial debris cover and a new toolkit for debris cover research

NASA Astrophysics Data System (ADS)

Herreid, Sam; Pellicciotti, Francesca

2017-04-01

A growing canon of literature is focused on resolving the processes and implications of debris cover on glaciers. However, this work is often confined to a handful of glaciers that were likely selected based on criteria optimizing their suitability to test a specific hypothesis or logistical ease. The role of debris cover in a glacier system is likely to not go overlooked in forthcoming research, yet the magnitude of this role at a global scale has not yet been fully described. Here, we present a map of debris cover for all glacierized regions on Earth including the Greenland Ice Sheet using 30 m Landsat data. This dataset will begin to open a wider context to the high quality, localized findings from the debris-covered glacier research community and help inform large-scale modeling efforts. A global map of debris cover also facilitates analysis attempting to isolate first order geomorphological and climate controls of supraglacial debris production. Furthering the objective of expanding the inclusion of debris cover in forthcoming research, we also present an under development suite of open-source, Python based tools. Requiring minimal and often freely available input data, we have automated the mapping of: i) debris cover, ii) ice cliffs, iii) debris cover evolution over the Landsat era and iv) glacier flow instabilities from altered debris structures. At the present time, debris extent is the only globally complete quantity but with the expanding repository of high quality global datasets and further tool development minimizing manual tasks and computational cost, we foresee all of these tools being applied globally in the near future.

Automotive Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Idaho state curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction in automotive technology. The document begins with a list of all tasks covered by the curriculum, a short course outline, and a curriculum framework that explains major content, laboratory activities, and intended outcomes.…

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles : Task 4A : design specifications.

DOT National Transportation Integrated Search

2015-08-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 4A, Design Specifications. : Structural design specifications are base...

V/STOL Dynamics, Control, and Flying Qualities

NASA Technical Reports Server (NTRS)

Franklin, James A.

2000-01-01

This publication presents material that constituted the lectures presented by the author as part of Course AA 234, Dynamics, Control, and Flying Qualities of Vertical/Short Takeoff and Landing (V/STOL) Aircraft that was taught in the Department of Aeronautics and Astronautics at Stanford University. It covers representative operations of vertical and short takeoff and landing (V/STOL) aircraft, a discussion of the pilot's strategy in controlling these aircraft, the equations of motion pertinent to V/STOL tasks, and their application in the analysis of longitudinal and lateral-directional control in hover and forward flight. Following that development, which applies to the characteristics of the basic airframe and propulsion system, the text concludes with a discussion of the contributions of control augmentation in specific flight tasks and of the integration of modern electronic displays with these controls.

Experiment definition phase shuttle laboratory LDRL-10.6 experiment

NASA Technical Reports Server (NTRS)

1975-01-01

This report for the Experiment Definition Phase of the Shuttle Laboratory LDRL 10.6 Micrometer Experiment covers period 27 June through 26 September 1975. Activities during the fifth quarter included: (1) reevaluation of system obscuration ratio with a subsequent reduction of this ratio from 0.417 to 0.362, (2) completion of detail drawings for the 6X pre-expander, (3) completion of detail drawings for the nine mirrors that comprise pointing and tracking optomechanical subsystem, (4) continuation of detailing of mechanical portions of CMSS and modifications to accommodate new obscuration ratio, (5) qualitative operation of the optomechanical subsystem of the 10.6 um receiver achieved under experiment measurement task; receiver fully integrated and operation demonstrated over a 10 km experimental link, and (6) data collection task initiated to begin preparation of link analysis volumes.

49 CFR 110.90 - Grant monitoring, reports, and records retention.

Code of Federal Regulations, 2010 CFR

2010-10-01

... performance of supported activities to assure compliance with applicable Federal requirements and achievement of performance goals. Monitoring must cover each program, function, activity, or task covered by the... shall submit a performance report at the completion of an activity for which reimbursement is being...

U.S. Preventive Services Task Force recommendations and cancer screening among female Medicare beneficiaries.

PubMed

Salloum, Ramzi G; Kohler, Racquel E; Jensen, Gail A; Sheridan, Stacey L; Carpenter, William R; Biddle, Andrea K

2014-03-01

Medicare covers several cancer screening tests not currently recommended by the U.S. Preventive Services Task Force (Task Force). In September 2002, the Task Force relaxed the upper age limit of 70 years for breast cancer screening recommendations, and in March 2003 an upper age limit of 65 years was introduced for cervical cancer screening recommendations. We assessed whether mammogram and Pap test utilization among women with Medicare coverage is influenced by changes in the Task Force's recommendations for screening. We identified female Medicare beneficiaries aged 66-80 years and used bivariate probit regression to examine the receipt of breast (mammogram) and cervical (Pap test) cancer screening reflecting changes in the Task Force recommendations. We analyzed 9,760 Medicare Current Beneficiary Survey responses from 2001 to 2007. More than two-thirds reported receiving a mammogram and more than one-third a Pap test in the previous 2 years. Lack of recommendation was given as a reason for not getting screened among the majority (51% for mammogram and 75% for Pap). After controlling for beneficiary-level socioeconomic characteristics and access to care factors, we did not observe a significant change in breast and cervical cancer screening patterns following the changes in Task Force recommendations. Although there is evidence that many Medicare beneficiaries adhere to screening guidelines, some women may be receiving non-recommended screening services covered by Medicare.

The 2011 nuclear medicine technology job analysis project of the American Registry of Radiologic Technologists.

PubMed

Anderson, Dan; Hubble, William; Press, Bret A; Hall, Scott K; Michels, Ann D; Koenen, Roxanne; Vespie, Alan W

2010-12-01

The American Registry of Radiologic Technologists (ARRT) conducts periodic job analysis projects to update the content and eligibility requirements for all certification examinations. In 2009, the ARRT conducted a comprehensive job analysis project to update the content specifications and clinical competency requirements for the nuclear medicine technology examination. ARRT staff and a committee of volunteer nuclear medicine technologists designed a job analysis survey that was sent to a random sample of 1,000 entry-level staff nuclear medicine technologists. Through analysis of the survey data and judgments of the committee, the project resulted in changes to the nuclear medicine technology examination task list, content specifications, and clinical competency requirements. The primary changes inspired by the project were the introduction of CT content to the examination and the expansion of the content covering cardiac procedures.

A natural command language for C/3/I applications

NASA Astrophysics Data System (ADS)

Mergler, J. P.

1980-03-01

The article discusses the development of a natural command language and a control and analysis console designed to simplify the task of the operator in field of Command, Control, Communications, and Intelligence. The console is based on a DEC LSI-11 microcomputer, supported by 16-K words of memory and a serial interface component. Discussion covers the language, which utilizes English and a natural syntax, and how it is integrated with the hardware. It is concluded that results have demonstrated the effectiveness of this natural command language.

Support of the Laboratory for Terrestrial Physics for Dynamics of the Solid Earth (DOSE)

NASA Technical Reports Server (NTRS)

Vandenberg, N. R.; Ma, C. (Technical Monitor)

2002-01-01

This final report summarizes the accomplishments during the contract period. Under the contract Nepal, Inc. provided support to the VLBI group at NASA's Goddard Space Flight Center. The contract covered a period of approximately eight years during high geodetic and astrometric VLBI evolved through several major changes. This report is divided into five sections that correspond to major task areas in the contract: A) Coordination rid Scheduling, B) Field System, CN Station Support, D) Analysis and Research and Development, and E) Computer Support.

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles : Task 4B : material & construction specifications : final report.

DOT National Transportation Integrated Search

2015-07-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 4B, Materials and Construction Specifications. : This technical report...

National Aspects of Creating and Using MARC/RECON Records.

ERIC Educational Resources Information Center

Rather, John C., Ed.; Avram, Henriette D., Ed.

The Retrospective Conversion (RECON) Working Task Force investigated the problems of converting retrospective catalog records to machine readable form. The major conclusions and recommendations of the Task Force cover five areas: the level of machine-readable records, conversion of other machine-readable data bases, a machine-readable National…

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles, task 3 - FRP composite pile flexural testing.

DOT National Transportation Integrated Search

2014-06-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP : composite piles for load-bearing in bridges. This report covers Task 3, FRP Composite Pile Flexural Testing. : Hollow and concrete filled...

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles, task 6 - FRP composite pile axial compression testing.

DOT National Transportation Integrated Search

2015-04-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP : composite piles for load-bearing in bridges. This report covers Task 6, FRP Composite Pile Axial Compression : Testing. : Hollow and conc...

Clinical Laboratory Helper.

ERIC Educational Resources Information Center

Szucs, Susan C.; And Others

This curriculum guide provides competencies and tasks for the position of clinical laboratory helper; it serves as both a career exploration experience and/or entry-level employment training. A list of 25 validated competencies and tasks covers careers from entry level to those that must be mastered to earn an associate degree in clinical…

Using Technology to Support STEM Reading

ERIC Educational Resources Information Center

Schneps, Matthew H.; O'Keeffe, Jamie K.; Heffner-Wong, Amanda; Sonnert, Gerhard

2010-01-01

Tasks in science, technology, engineering, and mathematics (STEM) are unusually varied because they target phenomena occurring in diverse domains and call upon a wide range of abilities to perform them. The fact that STEM tasks cover such a broad spectrum of abilities makes these fields uncharacteristically inclusive: Individuals with disabilities…

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles : Task 5 : laminate durability testing : final report.

DOT National Transportation Integrated Search

2015-05-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 5, Laminate Durability Testing. : Mechanical properties of the FRP mat...

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles, task 1 - mechanical properties of FRP piles.

DOT National Transportation Integrated Search

2014-10-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP : composite piles for load-bearing in bridges. This report covers Task 1, Mechanical Properties of FRP Piles. : Mechanical and geotechnic...

Mobile Applications for Diabetes Self-Management: Status and Potential

PubMed Central

El-Gayar, Omar; Timsina, Prem; Nawar, Nevine; Eid, Wael

2013-01-01

Background Advancements in smartphone technology coupled with the proliferation of data connectivity has resulted in increased interest and unprecedented growth in mobile applications for diabetes self-management. The objective of this article is to determine, in a systematic review, whether diabetes applications have been helping patients with type 1 or type 2 diabetes self-manage their condition and to identify issues necessary for large-scale adoption of such interventions. Methods The review covers commercial applications available on the Apple App Store (as a representative of commercially available applications) and articles published in relevant databases covering a period from January 1995 to August 2012. The review included all applications supporting any diabetes self-management task where the patient is the primary actor. Results Available applications support self-management tasks such as physical exercise, insulin dosage or medication, blood glucose testing, and diet. Other support tasks considered include decision support, notification/alert, tagging of input data, and integration with social media. The review points to the potential for mobile applications to have a positive impact on diabetes self-management. Analysis indicates that application usage is associated with improved attitudes favorable to diabetes self-management. Limitations of the applications include lack of personalized feedback; usability issues, particularly the ease of data entry; and integration with patients and electronic health records. Conclusions Research into the adoption and use of user-centered and sociotechnical design principles is needed to improve usability, perceived usefulness, and, ultimately, adoption of the technology. Proliferation and efficacy of interventions involving mobile applications will benefit from a holistic approach that takes into account patients’ expectations and providers’ needs. PMID:23439183

Rangeland Brush Estimation Toolbox (RaBET): An Approach for Evaluating Brush Management Conservation Efforts in Western Grazing Lands

NASA Astrophysics Data System (ADS)

Holifield Collins, C.; Kautz, M. A.; Skirvin, S. M.; Metz, L. J.

2016-12-01

There are over 180 million hectares of rangelands and grazed forests in the central and western United States. Due to the loss of perennial grasses and subsequent increased runoff and erosion that can degrade the system, woody cover species cannot be allowed to proliferate unchecked. The USDA-Natural Resources Conservation Service (NRCS) has allocated extensive resources to employ brush management (removal) as a conservation practice to control woody species encroachment. The Rangeland-Conservation Effects Assessment Project (CEAP) has been tasked with determining how effective the practice has been, however their land managers lack a cost-effective means to conduct these assessments at the necessary scale. An ArcGIS toolbox for generating large-scale, Landsat-based, spatial maps of woody cover on grazing lands in the western United States was developed through a collaboration with NRCS Rangeland-CEAP. The toolbox contains two main components of operation, image generation and temporal analysis, and utilizes simple interfaces requiring minimum user inputs. The image generation tool utilizes geographically specific algorithms developed from combining moderate-resolution (30-m) Landsat imagery and high-resolution (1-m) National Agricultural Imagery Program (NAIP) aerial photography to produce the woody cover scenes at the Major Land Resource (MLRA) scale. The temporal analysis tool can be used on these scenes to assess treatment effectiveness and monitor woody cover reemergence. RaBET provides rangeland managers an operational, inexpensive decision support tool to aid in the application of brush removal treatments and assessing their effectiveness.

National Agricultural-Based Lubricants (NABL) Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honary, Lou

2013-09-30

This project, while defined as a one year project from September 30, 2012 – September 30, 2013, was a continuation of a number of tasks that were defined in previous years. Those tasks were performed and were finalized in this period. The UNI-NABL Center, which has been in operation in various forms since 1991, has closed its facilities since September 2013 and will be phasing out in June 2014. This report covers the individual tasks that were identified in the previous reports and provides closure to each task in its final stage.

The Effects of Multimodal Mobile Communications on Cooperative Team Interactions Executing Distributed Tasks

DTIC Science & Technology

2013-07-01

AFRL-RH-WP-TP-2013-0046 The Effects of Multimodal Mobile Communications on Cooperative Team Interactions Executing Distributed Tasks Gregory...3. DATES COVERED (From - To) 31-07-13 Interim 01 August 2011 – 01 August 2013 4. TITLE AND SUBTITLE The Effects of Multimodal Mobile... multimodal communication capabilities can con- tribute to the effectiveness and efficiency of real-time, task outcome and per- formance. In this paper, we

Effects of Rifle Handling, Target Acquisition, and Trigger Control on Simulated Shooting Performance

DTIC Science & Technology

2014-05-06

qualification task, and covers all of the training requirements listed in the Soldier’s Manual of Common Tasks: Warrior Skills Level 1 handbook...allow for more direct and standardized training based on common Soldier errors. If discernible patterns in these core elements of marksmanship were...more than 50 percent of variance in marksmanship performance on a standard EST weapons qualification task for participants whose 3 Snellen acuity

Task Descriptions in Diagnostic Radiology. Research Report No. 7. Volume 3, Machine-Related, Patient Care and Administrative Tasks: What Radiologists, Technologists, Nurses and Physicists Do to Run Things and Look After Patients and Equipment.

ERIC Educational Resources Information Center

Gilpatrick, Eleanor

The third of four volumes in Research Report No. 7 of the Health Services Mobility Study (HSMS), this book contains 149 diagnostic radiologist task descriptions that cover activities in the area of nursing (patient care), film processing, quality assurance, radiation protection, machine maintenance, housekeeping, and administration at the…

Developing Remote Sensing Capabilities for Meter-Scale Sea Ice Properties

DTIC Science & Technology

2013-09-30

such as MODIS . APPROACH 1. Task and acquire high resolution panchromatic and multispectral optical (e.g. Quickbird, Worldview, National Assets...does not display a currently valid OMB control number. 1. REPORT DATE 30 SEP 2013 2. REPORT TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4...cloud cover , an excessive percentage of the imagery acquired over drifting sites was cloud covered , and the vendor did not delay acquisitions or

Measuring Individual Differences in Decision Biases: Methodological Considerations

PubMed Central

Aczel, Balazs; Bago, Bence; Szollosi, Aba; Foldes, Andrei; Lukacs, Bence

2015-01-01

Individual differences in people's susceptibility to heuristics and biases (HB) are often measured by multiple-bias questionnaires consisting of one or a few items for each bias. This research approach relies on the assumptions that (1) different versions of a decision bias task measure are interchangeable as they measure the same cognitive failure; and (2) that some combination of these tasks measures the same underlying construct. Based on these assumptions, in Study 1 we developed two versions of a new decision bias survey for which we modified 13 HB tasks to increase their comparability, construct validity, and the participants' motivation. The analysis of the responses (N = 1279) showed weak internal consistency within the surveys and a great level of discrepancy between the extracted patterns of the underlying factors. To explore these inconsistencies, in Study 2 we used three original examples of HB tasks for each of seven biases. We created three decision bias surveys by allocating one version of each HB task to each survey. The participants' responses (N = 527) showed a similar pattern as in Study 1, questioning the assumption that the different examples of the HB tasks are interchangeable and that they measure the same underlying construct. These results emphasize the need to understand the domain-specificity of cognitive biases as well as the effect of the wording of the cover story and the response mode on bias susceptibility before employing them in multiple-bias questionnaires. PMID:26635677

Report of the Task Force on De-Regulation Initiatives.

ERIC Educational Resources Information Center

Fishbein, Estelle A.; Blumer, Dennis H.

In response to a request by the Presidential Task Force on Regulatory Relief, this report offers specific recommendations for reform of federal regulations. A cover letter explains the constraints imposed by the recommended format: that the report is unable to address adequately the area of federal regulatory activity generating the most adverse…

Heavy vehicle driver workload assessment. Task 7A, in-cab text message system and cellular phone use by heavy vehicle drivers on road

DOT National Transportation Integrated Search

This report covers the seventh in a series of tasks involving the assessment of driver workload in heavy vehicle operation associated with in-cab devices or systems. This report addresses the application of a workload assessment protocol and measurem...

Teaching Speaking

ERIC Educational Resources Information Center

Bleistein, T.; Smith, M. K.; Lewis, M.

2013-01-01

To meet the needs of students, teachers of oral English have three main tasks: find out all they can about how speaking works, look for ways to introduce their classes to the language of conversation, and provide students with opportunities to practice speaking English. This book covers these three tasks in an easy-to-follow guide that language…

Meta-tools for software development and knowledge acquisition

NASA Technical Reports Server (NTRS)

Eriksson, Henrik; Musen, Mark A.

1992-01-01

The effectiveness of tools that provide support for software development is highly dependent on the match between the tools and their task. Knowledge-acquisition (KA) tools constitute a class of development tools targeted at knowledge-based systems. Generally, KA tools that are custom-tailored for particular application domains are more effective than are general KA tools that cover a large class of domains. The high cost of custom-tailoring KA tools manually has encouraged researchers to develop meta-tools for KA tools. Current research issues in meta-tools for knowledge acquisition are the specification styles, or meta-views, for target KA tools used, and the relationships between the specification entered in the meta-tool and other specifications for the target program under development. We examine different types of meta-views and meta-tools. Our current project is to provide meta-tools that produce KA tools from multiple specification sources--for instance, from a task analysis of the target application.

Applications of integrated human error identification techniques on the chemical cylinder change task.

PubMed

Cheng, Ching-Min; Hwang, Sheue-Ling

2015-03-01

This paper outlines the human error identification (HEI) techniques that currently exist to assess latent human errors. Many formal error identification techniques have existed for years, but few have been validated to cover latent human error analysis in different domains. This study considers many possible error modes and influential factors, including external error modes, internal error modes, psychological error mechanisms, and performance shaping factors, and integrates several execution procedures and frameworks of HEI techniques. The case study in this research was the operational process of changing chemical cylinders in a factory. In addition, the integrated HEI method was used to assess the operational processes and the system's reliability. It was concluded that the integrated method is a valuable aid to develop much safer operational processes and can be used to predict human error rates on critical tasks in the plant. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Urban Land Cover/use Change Detection Using High Resolution SPOT 5 and SPOT 6 Images and Urban Atlas Nomenclature

NASA Astrophysics Data System (ADS)

Akay, S. S.; Sertel, E.

2016-06-01

Urban land cover/use changes like urbanization and urban sprawl have been impacting the urban ecosystems significantly therefore determination of urban land cover/use changes is an important task to understand trends and status of urban ecosystems, to support urban planning and to aid decision-making for urban-based projects. High resolution satellite images could be used to accurately, periodically and quickly map urban land cover/use and their changes by time. This paper aims to determine urban land cover/use changes in Gaziantep city centre between 2010 and 2105 using object based images analysis and high resolution SPOT 5 and SPOT 6 images. 2.5 m SPOT 5 image obtained in 5th of June 2010 and 1.5 m SPOT 6 image obtained in 7th of July 2015 were used in this research to precisely determine land changes in five-year period. In addition to satellite images, various ancillary data namely Normalized Difference Vegetation Index (NDVI), Difference Water Index (NDWI) maps, cadastral maps, OpenStreetMaps, road maps and Land Cover maps, were integrated into the classification process to produce high accuracy urban land cover/use maps for these two years. Both images were geometrically corrected to fulfil the 1/10,000 scale geometric accuracy. Decision tree based object oriented classification was applied to identify twenty different urban land cover/use classes defined in European Urban Atlas project. Not only satellite images and satellite image-derived indices but also different thematic maps were integrated into decision tree analysis to create rule sets for accurate mapping of each class. Rule sets of each satellite image for the object based classification involves spectral, spatial and geometric parameter to automatically produce urban map of the city centre region. Total area of each class per related year and their changes in five-year period were determined and change trend in terms of class transformation were presented. Classification accuracy assessment was conducted by creating a confusion matrix to illustrate the thematic accuracy of each class.

Study of electrical and chemical propulsion systems for auxiliary propulsion of large space systems, volume 2

NASA Technical Reports Server (NTRS)

Smith, W. W.

1981-01-01

The five major tasks of the program are reported. Task 1 is a literature search followed by selection and definition of seven generic spacecraft classes. Task 2 covers the determination and description of important disturbance effects. Task 3 applies the disturbances to the generic spacecraft and adds maneuver and stationkeeping functions to define total auxiliary propulsion systems requirements for control. The important auxiliary propulsion system characteristics are identified and sensitivities to control functions and large space system characteristics determined. In Task 4, these sensitivities are quantified and the optimum auxiliary propulsion system characteristics determined. Task 5 compares the desired characteristics with those available for both electrical and chemical auxiliary propulsion systems to identify the directions technology advances should take.

Rotation, Reflection, and Frame Changes; Orthogonal tensors in computational engineering mechanics

NASA Astrophysics Data System (ADS)

Brannon, R. M.

2018-04-01

Whilst vast literature is available for the most common rotation-related tasks such as coordinate changes, most reference books tend to cover one or two methods, and resources for less-common tasks are scarce. Specialized research applications can be found in disparate journal articles, but a self-contained comprehensive review that covers both elementary and advanced concepts in a manner comprehensible to engineers is rare. Rotation, Reflection, and Frame Changes surveys a refreshingly broad range of rotation-related research that is routinely needed in engineering practice. By illustrating key concepts in computer source code, this book stands out as an unusually accessible guide for engineers and scientists in engineering mechanics.

National facilities study. Volume 3: Mission and requirements model report

NASA Technical Reports Server (NTRS)

1994-01-01

The National Facility Study (NFS) was initiated in 1992 by Daniel S. Goldin, Administrator of NASA as an initiative to develop a comprehensive and integrated long-term plan for future facilities. The resulting, multi-agency NFS consisted of three Task Groups: Aeronautics, Space Operations, and Space Research and Development (R&D) Task Groups. A fourth group, the Engineering and Cost Analysis Task Group, was subsequently added to provide cross-cutting functions, such as assuring consistency in developing an inventory of space facilities. Space facilities decisions require an assessment of current and future needs. Therefore, the two task groups dealing with space developed a consistent model of future space mission programs, operations and R&D. The model is a middle ground baseline constructed for NFS analytical purposes with excursions to cover potential space program strategies. The model includes three major sectors: DOD, civilian government, and commercial space. The model spans the next 30 years because of the long lead times associated with facilities development and usage. This document, Volume 3 of the final NFS report, is organized along the following lines: Executive Summary -- provides a summary view of the 30-year mission forecast and requirements baseline, an overview of excursions from that baseline that were studied, and organization of the report; Introduction -- provides discussions of the methodology used in this analysis; Baseline Model -- provides the mission and requirements model baseline developed for Space Operations and Space R&D analyses; Excursions from the baseline -- reviews the details of variations or 'excursions' that were developed to test the future program projections captured in the baseline; and a Glossary of Acronyms.

A Report of the Child Labor Task Force.

ERIC Educational Resources Information Center

Oregon State Bureau of Labor and Industry, Portland.

A task force studied youth work and its impact on the health, education, and safety of 16- and 17-year-olds. The study covered such issues as the following: effects of work on school performance, work's physical and psychological effects on young people, the effects work can have on young people's preparation for lifelong work, and what steps can…

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles, task 2 - FRP composite pile driving at the Richmond-Dresden bridge over the Kennebec River.

DOT National Transportation Integrated Search

2014-01-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP : composite piles for load-bearing in bridges. This report covers Task 2, FRP Composite Pile Driving at the : Richmond-Dresden Bridge over ...

Development and testing of LANDSAT-assisted procedures for cost-effective forest management

NASA Technical Reports Server (NTRS)

Colwell, J. E.; Sanders, P. A.; Thomson, F. J.

1982-01-01

The capability of LANDSAT data to make certain forest management activities on the Clearwater National Forest in Idaho more efficient and/or more effective was examined. One task was designed to evaluate the utility of single-date categorized LANDSAT data as a source of land cover information for use in assessing elk habitat quality. LANDSAT data was used to categorize conifer forest on the basis of the percentage crown closure. This information was used to evaluate elk habitat quality on the basis of the ratio of cover to forage. A preliminary conclusion is that categorized LANDSAT data can be helpful for assessing current elk habitat quality if the relationships between crown closure and hiding cover can be adequately defined. Another task was designed to evaluate the utility of merged two-date LANDSAT data for updating the existing (1972) Clearwater Forest land cover information. LANDSAT data from 1972 and 1981 were merged, and change images were created. These products indicated where major changes were taking place. These areas could then be examined on aerial photography or in the field to further characterize the nature and magnitude of the change. The 1972 land cover information could be subsequently altered in these changed areas, whereas areas with no change would not have to be re-examined.

Data base on physical observations of near-Earth asteroids and establishment of a network to coordinate observations of newly discovered near-Earth asteroids

NASA Technical Reports Server (NTRS)

Davis, D. R.; Chapman, C. R.; Campins, H.

1990-01-01

This program consists of two tasks: (1) development of a data base of physical observations of near-earth asteroids and establishment of a network to coordinate observations of newly discovered earth-approaching asteroids; and (2) a simulation of the surface of low-activity comets. Significant progress was made on task one and, and task two was completed during the period covered by this progress report.

An Integrative Wave Model for the Marginal Ice Zone Based on a Rheological Parameterization

DTIC Science & Technology

2015-09-30

2015) Characterizing the behavior of gravity wave propagation into a floating or submerged viscous layer , 2015 AGU Joint Assembly Meeting, May 3–7...are the PI and a PhD student. Task 1: Use an analytical method to determine the propagation of waves through a floating viscoelastic mat for a wide...and Ben Holt. 2 Task 3: Assemble all existing laboratory and field data of wave propagation in ice covers. Task 4: Determine if all existing

Overview of the Machine-Tool Task Force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.

1981-06-08

The Machine Tool Task Force, (MTTF) surveyed the state of the art of machine tool technology for material removal for two and one-half years. This overview gives a brief summary of the approach, specific subjects covered, principal conclusions and some of the key recommendations aimed at improving the technology and advancing the productivity of machine tools. The Task Force consisted of 123 experts from the US and other countries. Their findings are documented in a five-volume report, Technology of Machine Tools.

Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Task 4 Report: Virtual Mockup Maintenance Task Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Timothy Shaw; Anthony Baratta; Vaughn Whisker

2005-02-28

Task 4 report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. This report focuses on using Full-scale virtual mockups for nuclear power plant training applications.

A System Approach to Navy Medical Education and Training. Appendix 17. Preventive Medicine Technician.

DTIC Science & Technology

1974-08-31

A System Approach to Navy Medical F Education and Training FINAL REPORT S. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(s) S. CONTRACT OR GRANT NUMUER( E ...covering some 50 Do , 1473 E ,,N o .Iov.6,1 Ii O,.,.Te, -o----,--, ,r"UNCLA.SIFIE,ECU,,,r. CLASSIFICATION OF TWIG ,.A,,9 €.,- =,,- ., UNCLASSIFIED t~tj41T...34 S𔃻+I’ TASK ANALYSIS BACKGflOU’D "/ __DATA SHEET INSTRUCTIONS 6 2 1. Use Mo. 2 pencil ONLY. E 2. Indicate responses with solid black mark in space

Shuttle orbiter Ku-band radar/communications system design evaluation

NASA Technical Reports Server (NTRS)

Dodds, J.; Holmes, J.; Huth, G. K.; Iwasaki, R.; Maronde, R.; Polydoros, A.; Weber, C.; Broad, P.

1980-01-01

Tasks performed in an examination and critique of a Ku-band radar communications system for the shuttle orbiter are reported. Topics cover: (1) Ku-band high gain antenna/widebeam horn design evaluation; (2) evaluation of the Ku-band SPA and EA-1 LRU software; (3) system test evaluation; (4) critical design review and development test evaluation; (5) Ku-band bent pipe channel performance evaluation; (6) Ku-band LRU interchangeability analysis; and (7) deliverable test equipment evaluation. Where discrepancies were found, modifications and improvements to the Ku-band system and the associated test procedures are suggested.

Keeping Track of Locations during Movement in 8- to 10-Month-Old Infants.

ERIC Educational Resources Information Center

Goldfield, Eugene C.; Dickerson, Donald J.

1981-01-01

Infants 8.5 and 9.5 months of age were tested for ability to determine the location of an object hidden in one of two covered containers before their left-right positions were reversed. Only the older infants provided with different colored covers to their containers were able to do this task. (Author/DB)

Using linear programming to minimize the cost of nurse personnel.

PubMed

Matthews, Charles H

2005-01-01

Nursing personnel costs make up a major portion of most hospital budgets. This report evaluates and optimizes the utility of the nurse personnel at the Internal Medicine Outpatient Clinic of Wake Forest University Baptist Medical Center. Linear programming (LP) was employed to determine the effective combination of nurses that would allow for all weekly clinic tasks to be covered while providing the lowest possible cost to the department. Linear programming is a standard application of standard spreadsheet software that allows the operator to establish the variables to be optimized and then requires the operator to enter a series of constraints that will each have an impact on the ultimate outcome. The application is therefore able to quantify and stratify the nurses necessary to execute the tasks. With the report, a specific sensitivity analysis can be performed to assess just how sensitive the outcome is to the stress of adding or deleting a nurse to or from the payroll. The nurse employee cost structure in this study consisted of five certified nurse assistants (CNA), three licensed practicing nurses (LPN), and five registered nurses (RN). The LP revealed that the outpatient clinic should staff four RNs, three LPNs, and four CNAs with 95 percent confidence of covering nurse demand on the floor. This combination of nurses would enable the clinic to: 1. Reduce annual staffing costs by 16 percent; 2. Force each level of nurse to be optimally productive by focusing on tasks specific to their expertise; 3. Assign accountability more efficiently as the nurses adhere to their specific duties; and 4. Ultimately provide a competitive advantage to the clinic as it relates to nurse employee and patient satisfaction. Linear programming can be used to solve capacity problems for just about any staffing situation, provided the model is indeed linear.

Analysis of speech sounds is left-hemisphere predominant at 100-150ms after sound onset.

PubMed

Rinne, T; Alho, K; Alku, P; Holi, M; Sinkkonen, J; Virtanen, J; Bertrand, O; Näätänen, R

1999-04-06

Hemispheric specialization of human speech processing has been found in brain imaging studies using fMRI and PET. Due to the restricted time resolution, these methods cannot, however, determine the stage of auditory processing at which this specialization first emerges. We used a dense electrode array covering the whole scalp to record the mismatch negativity (MMN), an event-related brain potential (ERP) automatically elicited by occasional changes in sounds, which ranged from non-phonetic (tones) to phonetic (vowels). MMN can be used to probe auditory central processing on a millisecond scale with no attention-dependent task requirements. Our results indicate that speech processing occurs predominantly in the left hemisphere at the early, pre-attentive level of auditory analysis.

[Financing of regional occupational health service centers: structure and financial criteria in years 2000-2001].

PubMed

Rydlewska-Liszkowska, Izabela

2003-01-01

The rational planning and financing of occupational health services at the national level have to be based on an appropriate system of information about individual units and their financial status that could illustrate their financial administration. This is required not only in view of the internal needs of public money management, but also in view of the national health accounts. The major task in this regard is to assess the level and structure of financing to individual units and to check the soundness of criteria used in the process of supplying financial means. The results of such an analysis can be a valuable source of information for planning carried out also by the institutions which provide funds to cover the cost of tasks performed by individual units. The aim of the project implemented by the Nofer Institute of Occupational Medicine was to collect, process and analyze data on the level and structure of financing of provincial occupational medicine centers. In this paper, the objectives, methodology and analytical tools are discussed. The results and structural data on the level and structure of financing of regional occupational health services centers covering a two-year period are presented. At the same time, the criteria for allocating funds were identified, which made it possible to evaluate the situation and to propose new solutions.

Lessons Learned from Deploying an Analytical Task Management Database

NASA Technical Reports Server (NTRS)

O'Neil, Daniel A.; Welch, Clara; Arceneaux, Joshua; Bulgatz, Dennis; Hunt, Mitch; Young, Stephen

2007-01-01

Defining requirements, missions, technologies, and concepts for space exploration involves multiple levels of organizations, teams of people with complementary skills, and analytical models and simulations. Analytical activities range from filling a To-Be-Determined (TBD) in a requirement to creating animations and simulations of exploration missions. In a program as large as returning to the Moon, there are hundreds of simultaneous analysis activities. A way to manage and integrate efforts of this magnitude is to deploy a centralized database that provides the capability to define tasks, identify resources, describe products, schedule deliveries, and generate a variety of reports. This paper describes a web-accessible task management system and explains the lessons learned during the development and deployment of the database. Through the database, managers and team leaders can define tasks, establish review schedules, assign teams, link tasks to specific requirements, identify products, and link the task data records to external repositories that contain the products. Data filters and spreadsheet export utilities provide a powerful capability to create custom reports. Import utilities provide a means to populate the database from previously filled form files. Within a four month period, a small team analyzed requirements, developed a prototype, conducted multiple system demonstrations, and deployed a working system supporting hundreds of users across the aeros pace community. Open-source technologies and agile software development techniques, applied by a skilled team enabled this impressive achievement. Topics in the paper cover the web application technologies, agile software development, an overview of the system's functions and features, dealing with increasing scope, and deploying new versions of the system.

Flow-induced vibration and fretting-wear damage in a moisture separator reheater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pettigrew, M.J.; Taylor, C.E.; Fisher, N.J.

1996-12-01

Tube failures due to excessive flow-induced vibration were experienced in the tube bundles of moisture separator reheaters in a BWR nuclear station. This paper presents the results of a root cause analysis and covers recommendations for continued operation and for replacement tube bundles. The following tasks are discussed: tube failure analysis; flow velocity distribution calculations; flow-induced vibration analysis with particular emphasis on finned-tubes; fretting-wear testing of a tube and tube-support material combination under simulated operating conditions; field measurements of flow-induced vibration; and development of vibration specifications for replacement tube bundles. The effect of transient operating conditions and of other operationalmore » changes such as tube fouling were considered in the analysis. This paper outlines a typical field problem and illustrates the application of flow-induced vibration technology for the solution of a practical problem.« less

Learning Activity Packets for Milling Machines. Unit II--Horizontal Milling Machines.

ERIC Educational Resources Information Center

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to set up and operate a horizontal mill. Tasks addressed in the LAP include mounting style "A" or "B" arbors and adjusting arbor…

78 FR 46792 - Federal Acquisition Regulation; Repeal of Sunset for Certain Protests of Task or Delivery Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... Defense Authorization Act (NDAA) for Fiscal Year 2013. This section removes the sunset date for protests against certain orders under a task-order contract or delivery-order contract for title 10 agencies only... agencies covered by title 10 of the United States Code, namely DoD, NASA, and Coast Guard. This section...

Deep Learning for Classification of Colorectal Polyps on Whole-slide Images

PubMed Central

Korbar, Bruno; Olofson, Andrea M.; Miraflor, Allen P.; Nicka, Catherine M.; Suriawinata, Matthew A.; Torresani, Lorenzo; Suriawinata, Arief A.; Hassanpour, Saeed

2017-01-01

Context: Histopathological characterization of colorectal polyps is critical for determining the risk of colorectal cancer and future rates of surveillance for patients. However, this characterization is a challenging task and suffers from significant inter- and intra-observer variability. Aims: We built an automatic image analysis method that can accurately classify different types of colorectal polyps on whole-slide images to help pathologists with this characterization and diagnosis. Setting and Design: Our method is based on deep-learning techniques, which rely on numerous levels of abstraction for data representation and have shown state-of-the-art results for various image analysis tasks. Subjects and Methods: Our method covers five common types of polyps (i.e., hyperplastic, sessile serrated, traditional serrated, tubular, and tubulovillous/villous) that are included in the US Multisociety Task Force guidelines for colorectal cancer risk assessment and surveillance. We developed multiple deep-learning approaches by leveraging a dataset of 2074 crop images, which were annotated by multiple domain expert pathologists as reference standards. Statistical Analysis: We evaluated our method on an independent test set of 239 whole-slide images and measured standard machine-learning evaluation metrics of accuracy, precision, recall, and F1 score and their 95% confidence intervals. Results: Our evaluation shows that our method with residual network architecture achieves the best performance for classification of colorectal polyps on whole-slide images (overall accuracy: 93.0%, 95% confidence interval: 89.0%–95.9%). Conclusions: Our method can reduce the cognitive burden on pathologists and improve their efficacy in histopathological characterization of colorectal polyps and in subsequent risk assessment and follow-up recommendations. PMID:28828201

Automatic design of magazine covers

NASA Astrophysics Data System (ADS)

Jahanian, Ali; Liu, Jerry; Tretter, Daniel R.; Lin, Qian; Damera-Venkata, Niranjan; O'Brien-Strain, Eamonn; Lee, Seungyon; Fan, Jian; Allebach, Jan P.

2012-03-01

In this paper, we propose a system for automatic design of magazine covers that quantifies a number of concepts from art and aesthetics. Our solution to automatic design of this type of media has been shaped by input from professional designers, magazine art directors and editorial boards, and journalists. Consequently, a number of principles in design and rules in designing magazine covers are delineated. Several techniques are derived and employed in order to quantify and implement these principles and rules in the format of a software framework. At this stage, our framework divides the task of design into three main modules: layout of magazine cover elements, choice of color for masthead and cover lines, and typography of cover lines. Feedback from professional designers on our designs suggests that our results are congruent with their intuition.

Advanced transportation system studies technical area 3: Alternate propulsion subsystem concepts, volume 2

NASA Technical Reports Server (NTRS)

Levak, Daniel

1993-01-01

The Alternate Propulsion Subsystem Concepts contract had five tasks defined for the first year. The tasks were: F-1A Restart Study, J-2S Restart Study, Propulsion Database Development, Space Shuttle Main Engine (SSME) Upper Stage Use, and CER's for Liquid Propellant Rocket Engines. The detailed study results, with the data to support the conclusions from various analyses, are being reported as a series of five separate Final Task Reports. Consequently, this volume only reports the required programmatic information concerning Computer Aided Design Documentation, and New Technology Reports. A detailed Executive Summary, covering all the tasks, is also available as Volume 1.

A group-based tasks allocation algorithm for the optimization of long leave opportunities in academic departments

NASA Astrophysics Data System (ADS)

Eyono Obono, S. D.; Basak, Sujit Kumar

2011-12-01

The general formulation of the assignment problem consists in the optimal allocation of a given set of tasks to a workforce. This problem is covered by existing literature for different domains such as distributed databases, distributed systems, transportation, packets radio networks, IT outsourcing, and teaching allocation. This paper presents a new version of the assignment problem for the allocation of academic tasks to staff members in departments with long leave opportunities. It presents the description of a workload allocation scheme and its algorithm, for the allocation of an equitable number of tasks in academic departments where long leaves are necessary.

HiC-bench: comprehensive and reproducible Hi-C data analysis designed for parameter exploration and benchmarking.

PubMed

Lazaris, Charalampos; Kelly, Stephen; Ntziachristos, Panagiotis; Aifantis, Iannis; Tsirigos, Aristotelis

2017-01-05

Chromatin conformation capture techniques have evolved rapidly over the last few years and have provided new insights into genome organization at an unprecedented resolution. Analysis of Hi-C data is complex and computationally intensive involving multiple tasks and requiring robust quality assessment. This has led to the development of several tools and methods for processing Hi-C data. However, most of the existing tools do not cover all aspects of the analysis and only offer few quality assessment options. Additionally, availability of a multitude of tools makes scientists wonder how these tools and associated parameters can be optimally used, and how potential discrepancies can be interpreted and resolved. Most importantly, investigators need to be ensured that slight changes in parameters and/or methods do not affect the conclusions of their studies. To address these issues (compare, explore and reproduce), we introduce HiC-bench, a configurable computational platform for comprehensive and reproducible analysis of Hi-C sequencing data. HiC-bench performs all common Hi-C analysis tasks, such as alignment, filtering, contact matrix generation and normalization, identification of topological domains, scoring and annotation of specific interactions using both published tools and our own. We have also embedded various tasks that perform quality assessment and visualization. HiC-bench is implemented as a data flow platform with an emphasis on analysis reproducibility. Additionally, the user can readily perform parameter exploration and comparison of different tools in a combinatorial manner that takes into account all desired parameter settings in each pipeline task. This unique feature facilitates the design and execution of complex benchmark studies that may involve combinations of multiple tool/parameter choices in each step of the analysis. To demonstrate the usefulness of our platform, we performed a comprehensive benchmark of existing and new TAD callers exploring different matrix correction methods, parameter settings and sequencing depths. Users can extend our pipeline by adding more tools as they become available. HiC-bench consists an easy-to-use and extensible platform for comprehensive analysis of Hi-C datasets. We expect that it will facilitate current analyses and help scientists formulate and test new hypotheses in the field of three-dimensional genome organization.

Space and Earth Sciences, Computer Systems, and Scientific Data Analysis Support, Volume 1

NASA Technical Reports Server (NTRS)

Estes, Ronald H. (Editor)

1993-01-01

This Final Progress Report covers the specific technical activities of Hughes STX Corporation for the last contract triannual period of 1 June through 30 Sep. 1993, in support of assigned task activities at Goddard Space Flight Center (GSFC). It also provides a brief summary of work throughout the contract period of performance on each active task. Technical activity is presented in Volume 1, while financial and level-of-effort data is presented in Volume 2. Technical support was provided to all Division and Laboratories of Goddard's Space Sciences and Earth Sciences Directorates. Types of support include: scientific programming, systems programming, computer management, mission planning, scientific investigation, data analysis, data processing, data base creation and maintenance, instrumentation development, and management services. Mission and instruments supported include: ROSAT, Astro-D, BBXRT, XTE, AXAF, GRO, COBE, WIND, UIT, SMM, STIS, HEIDI, DE, URAP, CRRES, Voyagers, ISEE, San Marco, LAGEOS, TOPEX/Poseidon, Pioneer-Venus, Galileo, Cassini, Nimbus-7/TOMS, Meteor-3/TOMS, FIFE, BOREAS, TRMM, AVHRR, and Landsat. Accomplishments include: development of computing programs for mission science and data analysis, supercomputer applications support, computer network support, computational upgrades for data archival and analysis centers, end-to-end management for mission data flow, scientific modeling and results in the fields of space and Earth physics, planning and design of GSFC VO DAAC and VO IMS, fabrication, assembly, and testing of mission instrumentation, and design of mission operations center.

Optical properties of fly ash. Volume 1, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Self, S.A.

1994-12-01

Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executivemore » summary of the whole program followed by the dissertation of Ghosal. Volume 1 contains the dissertation of Ghosal which covers the characterization of fly ash and the measurements of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.« less

Specific PET Imaging Probes for Early Detection of Prostate Cancer Metastases

DTIC Science & Technology

2009-05-01

REPORT DATE (DD-MM-YYYY) 31/05/2009 2 . REPORT TYPE Annual 3. DATES COVERED (From - To) 1 MAY 2008-30 APR 2009 4. TITLE AND SUBTITLE Specific...specific” GAG (Objective I) Task 2 : Synthesis of L-, D-, or mixed L/D polyargines (Objective II) Task 3: In vitro and in vivo evaluation of the FITC...tagged polyarginines (Objective II) Months 6 – 24: Task 4: Prepare p-SCN-Bn-CB-TE2A and the multivalent scaffolds (CB-TE2O-(PEG-COOH) 2 or CB- TE2A-(PEG

Modelling multi-rotor UAVs swarm deployment using virtual pheromones

PubMed Central

Pujol, Mar; Rizo, Ramón; Rizo, Carlos

2018-01-01

In this work, a swarm behaviour for multi-rotor Unmanned Aerial Vehicles (UAVs) deployment will be presented. The main contribution of this behaviour is the use of a virtual device for quantitative sematectonic stigmergy providing more adaptable behaviours in complex environments. It is a fault tolerant highly robust behaviour that does not require prior information of the area to be covered, or to assume the existence of any kind of information signals (GPS, mobile communication networks …), taking into account the specific features of UAVs. This behaviour will be oriented towards emergency tasks. Their main goal will be to cover an area of the environment for later creating an ad-hoc communication network, that can be used to establish communications inside this zone. Although there are several papers on robotic deployment it is more difficult to find applications with UAV systems, mainly because of the existence of various problems that must be overcome including limitations in available sensory and on-board processing capabilities and low flight endurance. In addition, those behaviours designed for UAVs often have significant limitations on their ability to be used in real tasks, because they assume specific features, not easily applicable in a general way. Firstly, in this article the characteristics of the simulation environment will be presented. Secondly, a microscopic model for deployment and creation of ad-hoc networks, that implicitly includes stigmergy features, will be shown. Then, the overall swarm behaviour will be modeled, providing a macroscopic model of this behaviour. This model can accurately predict the number of agents needed to cover an area as well as the time required for the deployment process. An experimental analysis through simulation will be carried out in order to verify our models. In this analysis the influence of both the complexity of the environment and the stigmergy system will be discussed, given the data obtained in the simulation. In addition, the macroscopic and microscopic models will be compared verifying the number of predicted individuals for each state regarding the simulation. PMID:29370203

A SURVEY INSTRUMENT FOR IDENTIFYING CLUSTERS OF KNOWLEDGE AND COMPETENCIES ASSOCIATED WITH PERFORMANCE OF FOOD SERVICE WORK, REPORT NUMBER 9.

ERIC Educational Resources Information Center

RAHMLOW, HAROLD F.; AND OTHERS

AS AN INITIAL STEP TOWARD IMPROVING VOCATIONAL CURRICULUMS IN FOOD SERVICING, A SPECIAL RESEARCH TEAM DEVELOPED AND FIELD TESTED A SURVEY INSTRUMENT FOR OBTAINING UP-TO-DATE INFORMATION ABOUT MAJOR TYPES AND COMBINATIONS OF TASKS PERFORMED BY FOOD SERVICE WORKERS. THE INSTRUMENT COVERED THE FOLLOWING BASIC TASKS OF FOOD SERVICING--(1) FOOD…

Commentary 1: The Challenging Task of Addressing Power, Control, and Influence in Sibling Relationships after the First Two Decades of Life

ERIC Educational Resources Information Center

Bedford, Victoria Hilkevitch

2017-01-01

Extending the topic of power, control, and influence in the sibling relationship past the years covered in this issue is not an easy task because most adult siblings neither interact frequently nor live in geographic proximity, although there are considerable ethnic and social class variations. Thus, there are limited opportunities to observe how…

Learning to Predict Demand in a Transport-Resource Sharing Task

DTIC Science & Technology

2015-09-01

exhaustive manner. We experimented with the scikit- learn machine- learning library for Python and a range of R packages before settling on R. We...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release; distribution is unlimited LEARNING TO...COVERED Master’s thesis 4. TITLE AND SUBTITLE LEARNING TO PREDICT DEMAND IN A TRANSPORT-RESOURCE SHARING TASK 5. FUNDING NUMBERS 6. AUTHOR

Rapid Dispersion of Polymicrobial Wound Biofilms with Depolymerase Enzymes

DTIC Science & Technology

2012-11-01

reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of...second annual report for DM102823. The first annual report covered the following aims: Aim 1. Task 1. IACUC review Aim 1. Task 2. Bioinformatic...mannosidase from New England Biolabs and evaluated its anti -biofilm properties. Preliminary data (figure, next page) suggests that this enzyme cleaves

Medical and Healthcare Curriculum Exploratory Analysis.

PubMed

Komenda, Martin; Karolyi, Matěj; Pokorná, Andrea; Vaitsis, Christos

2017-01-01

In the recent years, medical and healthcare higher education institutions compile their curricula in different ways in order to cover all necessary topics and sections that the students will need to go through to success in their future clinical practice. A medical and healthcare curriculum consists of many descriptive parameters, which define statements of what, when, and how students will learn in the course of their studies. For the purpose of understanding a complicated medical and healthcare curriculum structure, we have developed a web-oriented platform for curriculum management covering in detail formal metadata specifications in accordance with the approved pedagogical background, namely outcome-based approach. Our platform provides a rich database that can be used for innovative detailed educational data analysis. In this contribution we would like to present how we used a proven process model as a way of increasing accuracy in solving individual analytical tasks with the available data. Moreover, we introduce an innovative approach on how to explore a dataset in accordance with the selected methodology. The achieved results from the selected analytical issues are presented here in clear visual interpretations in an attempt to visually describe the entire medical and healthcare curriculum.

Cycle O(CY1991) NLS trade studies and analyses report. Book 2, part 2: Propulsion

NASA Technical Reports Server (NTRS)

Cronin, R.; Werner, M.; Bonson, S.; Spring, R.; Houston, R.

1992-01-01

This report documents the propulsion system tasks performed in support of the National Launch System (NLS) Cycle O preliminary design activities. The report includes trades and analyses covering the following subjects: (1) Maximum Tank Stretch Study; (2) No LOX Bleed Performance Analysis; (3) LOX Bleed Trade Study; (4) LO2 Tank Pressure Limits; (5) LOX Tank Pressurization System Using Helium; (6) Space Transportation Main Engine (STME) Heat Exchanger Performance; (7) LH2 Passive Recirculation Performance Analysis; (8) LH2 Bleed/Recirculation Study; (9) LH2 Tank Pressure Limits; and (10) LH2 Pressurization System. For each trade study an executive summary and a detailed trade study are provided. For the convenience of the reader, a separate section containing a compilation of only the executive summaries is also provided.

Advanced turbine study

NASA Technical Reports Server (NTRS)

Castro, J. H.

1985-01-01

The feasibility of an advanced convective cooling concept applied to rocket turbine airfoils which operate in a high pressure hydrogen and methane environment was investigated. The concept consists of a central structural member in which grooves are machined. The grooves are temporarily filled with a removable filler and the entire airfoil is covered with a layer of electroformed nickel, or nickel base alloy. After removal of the filler, the low thermal resistance of the nickel closure causes the wall temperature to be reduced by heat transfer to the coolant. The program is divided in the following tasks: (1) turbine performance appraisal; (2) coolant geometry evaluation; (3) test hardware design and analysis; and (4) test airfoil fabrication.

The identification of van Hiele level students on the topic of space analytic geometry

NASA Astrophysics Data System (ADS)

Yudianto, E.; Sunardi; Sugiarti, T.; Susanto; Suharto; Trapsilasiwi, D.

2018-03-01

Geometry topics are still considered difficult by most students. Therefore, this study focused on the identification of students related to van Hiele levels. The task used from result of the development of questions related to analytical geometry of space. The results of the work involving 78 students who worked on these questions covered 11.54% (nine students) classified on a visual level; 5.13% (four students) on analysis level; 1.28% (one student) on informal deduction level; 2.56% (two students) on deduction and 2.56% (two students) on rigor level, and 76.93% (sixty students) classified on the pre-visualization level.

Cycle 0(CY1991) NLS trade studies and analyses report. Book 1: Structures and core vehicle

NASA Technical Reports Server (NTRS)

1992-01-01

This report (SR-1: Structures, Trades, and Analysis), documents the Core Tankage Trades and analyses performed in support of the National Launch System (NLS) Cycle 0 preliminary design activities. The report covers trades that were conducted on the Vehicle Assembly, Fwd Skirt, LO2 Tank, Intertank, LH2 Tank, and Aft Skirt of the NLS Core Tankage. For each trade study, a two page executive summary and the detail trade study are provided. The trade studies contain study results, recommended changes to the Cycle 0 Baselines, and suggested follow on tasks to be performed during Cycle 1.

Theoretical Studies of Processes Affecting the Stratospheric and Free Tropospheric Aerosols

NASA Technical Reports Server (NTRS)

Hamill, Patrick

1999-01-01

This report describes the work done with funding from NASA Grant during the past three years. Funding commenced in June, 1996 and had a planned duration of three years. This report covers the time period June 1996 to June 1999. Here we present a short description of the projects carried out and documentation of the work done in terms of publications, papers presented, and conferences attended: microphysical modeling consist of two related tasks (1) development of a simple microphysical model for modeling the Pinatubo plume and (2) carrying out a study of sulfate particle formation in volcanic plume.Also analysis of sun photometer measurements are presented.

Software Development Standard Processes (SDSP)

NASA Technical Reports Server (NTRS)

Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.;

An economic framework for preventive care advice.

PubMed

Pauly, Mark V; Sloan, Frank A; Sullivan, Sean D

2014-11-01

Under the Affordable Care Act, preventive care measures, including vaccinations and screenings, recommended by the Advisory Committee on Immunization Practices and the US Preventive Services Task Force must be covered in full by insurance. These recommendations affect the cost of medical care. Yet neither organization explicitly incorporates measures of efficiency or cost-effectiveness in making its recommendations. To redress this shortcoming, we propose a decision-making framework for these two organizations based on the principles of economic efficiency. Our analysis suggests that routine use of a preventive service should be recommended for full insurance coverage if the service's cost-effectiveness exceeds a socially determined threshold. For less cost-effective services, we suggest that information about effectiveness and cost should be provided to consumers by physicians or government, but the choice of care and insurance coverage for care should be made by individuals. For the least cost-effective services, the two organizations should discourage public and private insurers from covering such services and report their unfavorable cost-effectiveness. Project HOPE—The People-to-People Health Foundation, Inc.

Saccadic eye movement applications for psychiatric disorders

PubMed Central

Bittencourt, Juliana; Velasques, Bruna; Teixeira, Silmar; Basile, Luis F; Salles, José Inácio; Nardi, Antonio Egídio; Budde, Henning; Cagy, Mauricio; Piedade, Roberto; Ribeiro, Pedro

2013-01-01

Objective The study presented here analyzed the patterns of relationship between oculomotor performance and psychopathology, focusing on depression, bipolar disorder, schizophrenia, attention-deficit hyperactivity disorder, and anxiety disorder. Methods Scientific articles published from 1967 to 2013 in the PubMed/Medline, ISI Web of Knowledge, Cochrane, and SciELO databases were reviewed. Results Saccadic eye movement appears to be heavily involved in psychiatric diseases covered in this review via a direct mechanism. The changes seen in the execution of eye movement tasks in patients with psychopathologies of various studies confirm that eye movement is associated with the cognitive and motor system. Conclusion Saccadic eye movement changes appear to be heavily involved in the psychiatric disorders covered in this review and may be considered a possible marker of some disorders. The few existing studies that approach the topic demonstrate a need to improve the experimental paradigms, as well as the methods of analysis. Most of them report behavioral variables (latency/reaction time), though electrophysiological measures are absent. PMID:24072973

Recent progress of task-specific ionic liquids in chiral resolution and extraction of biological samples and metal ions.

PubMed

Wu, Datong; Cai, Pengfei; Zhao, Xiaoyong; Kong, Yong; Pan, Yuanjiang

2018-01-01

Ionic liquids have been functionalized for modern applications. The functional ionic liquids are also called task-specific ionic liquids. Various task-specific ionic liquids with certain groups have been constructed and exploited widely in the field of separation. To take advantage of their properties in separation science, task-specific ionic liquids are generally used in techniques such as liquid-liquid extraction, solid-phase extraction, gas chromatography, high-performance liquid chromatography, and capillary electrophoresis. This review mainly covers original research papers published in the last five years, and we will focus on task-specific ionic liquids as the chiral selectors in chiral resolution and as extractant or sensor for biological samples and metal ion purification. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Activities of the Oil Implementation Task Force, reporting period March--August 1991; Contracts for field projects and supporting research on enhanced oil recovery, reporting period October--December 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Activities of DOE's Oil Implementation Task Force for the period March--August 1991 are reviewed. Contracts for fields projects and supporting research on enhanced oil recovery are discussed, with a list of related publications given. Enhanced recovery processes covered include chemical flooding, gas displacement, thermal recovery, and microbial recovery.

The Difficulty of "Length x Width": Is a Square the Unit of Measurement?

ERIC Educational Resources Information Center

Kamii, Constance; Kysh, Judith

2006-01-01

In individual interviews, 220 students in grades 4, 6, 8, and 9 were given one task, and 72 eighth graders were given three tasks to answer two questions: (a) Is a square the unit of measurement for an area for students in grades 4-8? and (b) Does a square have a space-covering characteristic for students in grade 8? The answers to both questions…

Skill components of task analysis

PubMed Central

Rogers, Wendy A.; Fisk, Arthur D.

2017-01-01

Some task analysis methods break down a task into a hierarchy of subgoals. Although an important tool of many fields of study, learning to create such a hierarchy (redescription) is not trivial. To further the understanding of what makes task analysis a skill, the present research examined novices’ problems with learning Hierarchical Task Analysis and captured practitioners’ performance. All participants received a task description and analyzed three cooking and three communication tasks by drawing on their knowledge of those tasks. Thirty six younger adults (18–28 years) in Study 1 analyzed one task before training and five afterwards. Training consisted of a general handout that all participants received and an additional handout that differed between three conditions: a list of steps, a flow-diagram, and concept map. In Study 2, eight experienced task analysts received the same task descriptions as in Study 1 and demonstrated their understanding of task analysis while thinking aloud. Novices’ initial task analysis scored low on all coding criteria. Performance improved on some criteria but was well below 100 % on others. Practitioners’ task analyses were 2–3 levels deep but also scored low on some criteria. A task analyst’s purpose of analysis may be the reason for higher specificity of analysis. This research furthers the understanding of Hierarchical Task Analysis and provides insights into the varying nature of task analyses as a function of experience. The derived skill components can inform training objectives. PMID:29075044

A combinatorial approach to the design of vaccines.

PubMed

Martínez, Luis; Milanič, Martin; Legarreta, Leire; Medvedev, Paul; Malaina, Iker; de la Fuente, Ildefonso M

2015-05-01

We present two new problems of combinatorial optimization and discuss their applications to the computational design of vaccines. In the shortest λ-superstring problem, given a family S1,...,S(k) of strings over a finite alphabet, a set Τ of "target" strings over that alphabet, and an integer λ, the task is to find a string of minimum length containing, for each i, at least λ target strings as substrings of S(i). In the shortest λ-cover superstring problem, given a collection X1,...,X(n) of finite sets of strings over a finite alphabet and an integer λ, the task is to find a string of minimum length containing, for each i, at least λ elements of X(i) as substrings. The two problems are polynomially equivalent, and the shortest λ-cover superstring problem is a common generalization of two well known combinatorial optimization problems, the shortest common superstring problem and the set cover problem. We present two approaches to obtain exact or approximate solutions to the shortest λ-superstring and λ-cover superstring problems: one based on integer programming, and a hill-climbing algorithm. An application is given to the computational design of vaccines and the algorithms are applied to experimental data taken from patients infected by H5N1 and HIV-1.

Methods for Conducting Cognitive Task Analysis for a Decision Making Task.

DTIC Science & Technology

1996-01-01

Cognitive task analysis (CTA) improves traditional task analysis procedures by analyzing the thought processes of performers while they complete a...for using these methods to conduct a CTA for domains which involve critical decision making tasks in naturalistic settings. The cognitive task analysis methods

Hands-on Approach to Prepare Specialists in Climate Changes Modeling and Analysis Using an Information-Computational Web-GIS Portal "Climate"

NASA Astrophysics Data System (ADS)

Shulgina, T. M.; Gordova, Y. E.; Martynova, Y. V.

2014-12-01

A problem of making education relevant to the workplace tasks is a key problem of higher education in the professional field of environmental sciences. To answer this challenge several new courses for students of "Climatology" and "Meteorology" specialties were developed and implemented at the Tomsk State University, which comprises theoretical knowledge from up-to-date environmental sciences with computational tasks. To organize the educational process we use an open-source course management system Moodle (www.moodle.org). It gave us an opportunity to combine text and multimedia in a theoretical part of educational courses. The hands-on approach is realized through development of innovative trainings which are performed within the information-computational web GIS platform "Climate" (http://climate.scert.ru/). The platform has a set of tools and data bases allowing a researcher to perform climate changes analysis on the selected territory. The tools are also used for students' trainings, which contain practical tasks on climate modeling and climate changes assessment and analysis. Laboratory exercises are covering three topics: "Analysis of regional climate changes"; "Analysis of climate extreme indices on the regional scale"; and "Analysis of future climate". They designed to consolidate students' knowledge of discipline, to instill in them the skills to work independently with large amounts of geophysical data using modern processing and analysis tools of web-GIS platform "Climate" and to train them to present results obtained on laboratory work as reports with the statement of the problem, the results of calculations and logically justified conclusion. Thus, students are engaged in n the use of modern tools of the geophysical data analysis and it cultivates dynamic of their professional learning. The approach can help us to fill in this gap because it is the only approach that offers experience, increases students involvement, advance the use of modern information and communication tools. Financial support for this research from the RFBR (13-05-12034, 14-05-00502), SB RAS project VIII.80.2.1 and grant of the President of RF (№ 181) is acknowledged.

COVER Project and Earth resources research transition

NASA Technical Reports Server (NTRS)

Botkin, D. B.; Estes, J. E. (Principal Investigator)

1986-01-01

Results of research in the remote sensing of natural boreal forest vegetation (the COVER project) are summarized. The study objectives were to establish a baseline forest test site; develop transforms of LANDSAT MSS and TM data for forest composition, biomass, leaf area index, and net primary productivity; and perform tasks required for testing hypotheses regarding observed spectral responses to changes in leaf area index in aspen. In addition, the transfer and documentation of data collected in the COVER project (removed from the Johnson Space Center following the discontinuation of Earth resources research at that facility) is described.

The Land Use and Land Cover Dichotomy: A Comparison of Two Land Classification Systems in Support of Urban Earth Science Applications

NASA Technical Reports Server (NTRS)

McAllister, William K.

2003-01-01

One is likely to read the terms 'land use' and 'land cover' in the same sentence, yet these concepts have different origins and different applications. Land cover is typically analyzed by earth scientists working with remotely sensed images. Land use is typically studied by urban planners who must prescribe solutions that could prevent future problems. This apparent dichotomy has led to different classification systems for land-based data. The works of earth scientists and urban planning practitioners are beginning to come together in the field of spatial analysis and in their common use of new spatial analysis technology. In this context, the technology can stimulate a common 'language' that allows a broader sharing of ideas. The increasing amount of land use and land cover change challenges the various efforts to classify in ways that are efficient, effective, and agreeable to all groups of users. If land cover and land uses can be identified by remote methods using aerial photography and satellites, then these ways are more efficient than field surveys of the same area. New technology, such as high-resolution satellite sensors, and new methods, such as more refined algorithms for image interpretation, are providing refined data to better identify the actual cover and apparent use of land, thus effectiveness is improved. However, the closer together and the more vertical the land uses are, the more difficult the task of identification is, and the greater is the need to supplement remotely sensed data with field study (in situ). Thus, a number of land classification methods were developed in order to organize the greatly expanding volume of data on land characteristics in ways useful to different groups. This paper distinguishes two land based classification systems, one developed primarily for remotely sensed data, and the other, a more comprehensive system requiring in situ collection methods. The intent is to look at how the two systems developed and how they can work together so that land based information can be shared among different users and compared over time.

Quality Evaluation of Land-Cover Classification Using Convolutional Neural Network

NASA Astrophysics Data System (ADS)

Dang, Y.; Zhang, J.; Zhao, Y.; Luo, F.; Ma, W.; Yu, F.

2018-04-01

Land-cover classification is one of the most important products of earth observation, which focuses mainly on profiling the physical characters of the land surface with temporal and distribution attributes and contains the information of both natural and man-made coverage elements, such as vegetation, soil, glaciers, rivers, lakes, marsh wetlands and various man-made structures. In recent years, the amount of high-resolution remote sensing data has increased sharply. Accordingly, the volume of land-cover classification products increases, as well as the need to evaluate such frequently updated products that is a big challenge. Conventionally, the automatic quality evaluation of land-cover classification is made through pixel-based classifying algorithms, which lead to a much trickier task and consequently hard to keep peace with the required updating frequency. In this paper, we propose a novel quality evaluation approach for evaluating the land-cover classification by a scene classification method Convolutional Neural Network (CNN) model. By learning from remote sensing data, those randomly generated kernels that serve as filter matrixes evolved to some operators that has similar functions to man-crafted operators, like Sobel operator or Canny operator, and there are other kernels learned by the CNN model that are much more complex and can't be understood as existing filters. The method using CNN approach as the core algorithm serves quality-evaluation tasks well since it calculates a bunch of outputs which directly represent the image's membership grade to certain classes. An automatic quality evaluation approach for the land-cover DLG-DOM coupling data (DLG for Digital Line Graphic, DOM for Digital Orthophoto Map) will be introduced in this paper. The CNN model as an robustness method for image evaluation, then brought out the idea of an automatic quality evaluation approach for land-cover classification. Based on this experiment, new ideas of quality evaluation of DLG-DOM coupling land-cover classification or other kinds of labelled remote sensing data can be further studied.

Optical properties of fly ash. Volume 2, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Self, S.A.

1994-12-01

Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executivemore » summary of the whole program followed by the dissertation of Ghosal and Ebert. Volume 2 contains the dissertation of Ebert which covers the measurements of the optical constants of slags, and calculations of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.« less

Validating Human Behavioral Models for Combat Simulations Using Techniques for the Evaluation of Human Performance

DTIC Science & Technology

2004-01-01

Cognitive Task Analysis Abstract As Department of Defense (DoD) leaders rely more on modeling and simulation to provide information on which to base...capabilities and intent. Cognitive Task Analysis (CTA) Cognitive Task Analysis (CTA) is an extensive/detailed look at tasks and subtasks performed by a...Domain Analysis and Task Analysis: A Difference That Matters. In Cognitive Task Analysis , edited by J. M. Schraagen, S.

Test-retest and between-site reliability in a multicenter fMRI study.

PubMed

Friedman, Lee; Stern, Hal; Brown, Gregory G; Mathalon, Daniel H; Turner, Jessica; Glover, Gary H; Gollub, Randy L; Lauriello, John; Lim, Kelvin O; Cannon, Tyrone; Greve, Douglas N; Bockholt, Henry Jeremy; Belger, Aysenil; Mueller, Bryon; Doty, Michael J; He, Jianchun; Wells, William; Smyth, Padhraic; Pieper, Steve; Kim, Seyoung; Kubicki, Marek; Vangel, Mark; Potkin, Steven G

2008-08-01

In the present report, estimates of test-retest and between-site reliability of fMRI assessments were produced in the context of a multicenter fMRI reliability study (FBIRN Phase 1, www.nbirn.net). Five subjects were scanned on 10 MRI scanners on two occasions. The fMRI task was a simple block design sensorimotor task. The impulse response functions to the stimulation block were derived using an FIR-deconvolution analysis with FMRISTAT. Six functionally-derived ROIs covering the visual, auditory and motor cortices, created from a prior analysis, were used. Two dependent variables were compared: percent signal change and contrast-to-noise-ratio. Reliability was assessed with intraclass correlation coefficients derived from a variance components analysis. Test-retest reliability was high, but initially, between-site reliability was low, indicating a strong contribution from site and site-by-subject variance. However, a number of factors that can markedly improve between-site reliability were uncovered, including increasing the size of the ROIs, adjusting for smoothness differences, and inclusion of additional runs. By employing multiple steps, between-site reliability for 3T scanners was increased by 123%. Dropping one site at a time and assessing reliability can be a useful method of assessing the sensitivity of the results to particular sites. These findings should provide guidance toothers on the best practices for future multicenter studies.

Summaries of Minnehaha Creek Watershed District Plans/Studies/Reports

DTIC Science & Technology

2004-01-30

34+ Management of all wetland functional assessment data in a Microsoft Access© database "+ Development of a GIS wetland data management system "+ Recommendations...General Task B Design GIS -Based Decision Making Model: Scenario-Based $125,000 $125,000 Model of Landuse Hydro Data Monitoring Task C Water Quality...Landuse and Land cover data + Watershed GIS data layers + Flood Insurance Rate Maps + Proposed project locations + Stream miles, reaches and conditions

Vector Magnetograph Design

NASA Technical Reports Server (NTRS)

Chipman, Russell A.

1996-01-01

This report covers work performed during the period of November 1994 through March 1996 on the design of a Space-borne Solar Vector Magnetograph. This work has been performed as part of a design team under the supervision of Dr. Mona Hagyard and Dr. Alan Gary of the Space Science Laboratory. Many tasks were performed and this report documents the results from some of those tasks, each contained in the corresponding appendix. Appendices are organized in chronological order.

[Progress of the ATM Crew}

NASA Technical Reports Server (NTRS)

Krabill, W. (Technical Monitor)

2001-01-01

Contract NAS5-99094 was initiated on December 1, 1998. The subject contract contains 5 tasks covering specific activities in support of 3 major sensor programs, each with a separate NASA Principal Investigator (PI). Accordingly, the bimonthly narrative is organized such that each of the programs are discussed separately with individual task activities presented within each of the programs. Acronyms are used throughout the report to keep the writing succinct. An attached glossary contains definitions for these acronyms.

Cognitive task analysis: harmonizing tasks to human capacities.

PubMed

Neerincx, M A; Griffioen, E

1996-04-01

This paper presents the development of a cognitive task analysis that assesses the task load of jobs and provides indicators for the redesign of jobs. General principles of human task performance were selected and, subsequently, integrated into current task modelling techniques. The resulting cognitive task analysis centres around four aspects of task load: the number of actions in a period, the ratio between knowledge- and rule-based actions, lengthy uninterrupted actions, and momentary overloading. The method consists of three stages: (1) construction of a hierarchical task model, (2) a time-line analysis and task load assessment, and (3), if necessary, adjustment of the task model. An application of the cognitive task analysis in railway traffic control showed its benefits over the 'old' task load analysis of the Netherlands Railways. It provided a provisional standard for traffic control jobs, conveyed two load risks -- momentary overloading and underloading -- and resulted in proposals to satisfy the standard and to diminish the two load risk.

Driver fitness medical guidelines.

DOT National Transportation Integrated Search

2009-09-01

This guide provides guidance to assist licensing agencies in making decisions about an individuals fitness for driving. This is the first attempt to produce a consolidated document covering medical conditions included in the task agreement between...

Microgravity science and applications program tasks, 1991 revision

NASA Technical Reports Server (NTRS)

1992-01-01

Presented here is a compilation of the active research tasks for FY 1991 sponsored by the Microgravity Science and Applications Division of the NASA Office of Space Science and Applications. The purpose is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. Included is an introductory description of the program, the strategy and overall goal, identification of the organizational structures and the people involved, and a description of each. The tasks are grouped into several categories: electronic materials; solidification of metals, alloys, and composites; fluids, interfaces, and transport; biotechnology; combustion science; glasses and ceramics; experimental technology, instrumentation, and facilities; and Physical and Chemistry Experiments (PACE). The tasks cover both the ground based and flight programs.

Analysis of post-mining excavations as places for municipal waste

NASA Astrophysics Data System (ADS)

Górniak-Zimroz, Justyna

2018-01-01

Waste management planning is an interdisciplinary task covering a wide range of issues including costs, legal requirements, spatial planning, environmental protection, geography, demographics, and techniques used in collecting, transporting, processing and disposing of waste. Designing and analyzing this issue is difficult and requires the use of advanced analysis methods and tools available in GIS geographic information systems containing readily available graphical and descriptive databases, data analysis tools providing expert decision support while selecting the best-designed alternative, and simulation models that allow the user to simulate many variants of waste management together with graphical visualization of the results of performed analyzes. As part of the research study, there have been works undertaken concerning the use of multi-criteria data analysis in waste management in areas located in southwestern Poland. These works have proposed the inclusion in waste management of post-mining excavations as places for the final or temporary collection of waste assessed in terms of their suitability with the tools available in GIS systems.

Launch vehicle design and GNC sizing with ASTOS

NASA Astrophysics Data System (ADS)

Cremaschi, Francesco; Winter, Sebastian; Rossi, Valerio; Wiegand, Andreas

2018-03-01

The European Space Agency (ESA) is currently involved in several activities related to launch vehicle designs (Future Launcher Preparatory Program, Ariane 6, VEGA evolutions, etc.). Within these activities, ESA has identified the importance of developing a simulation infrastructure capable of supporting the multi-disciplinary design and preliminary guidance navigation and control (GNC) design of different launch vehicle configurations. Astos Solutions has developed the multi-disciplinary optimization and launcher GNC simulation and sizing tool (LGSST) under ESA contract. The functionality is integrated in the Analysis, Simulation and Trajectory Optimization Software for space applications (ASTOS) and is intended to be used from the early design phases up to phase B1 activities. ASTOS shall enable the user to perform detailed vehicle design tasks and assessment of GNC systems, covering all aspects of rapid configuration and scenario management, sizing of stages, trajectory-dependent estimation of structural masses, rigid and flexible body dynamics, navigation, guidance and control, worst case analysis, launch safety analysis, performance analysis, and reporting.

AppEEARS: A Simple Tool that Eases Complex Data Integration and Visualization Challenges for Users

NASA Astrophysics Data System (ADS)

Maiersperger, T.

2017-12-01

The Application for Extracting and Exploring Analysis-Ready Samples (AppEEARS) offers a simple and efficient way to perform discovery, processing, visualization, and acquisition across large quantities and varieties of Earth science data. AppEEARS brings significant value to a very broad array of user communities by 1) significantly reducing data volumes, at-archive, based on user-defined space-time-variable subsets, 2) promoting interoperability across a wide variety of datasets via format and coordinate reference system harmonization, 3) increasing the velocity of both data analysis and insight by providing analysis-ready data packages and by allowing interactive visual exploration of those packages, and 4) ensuring veracity by making data quality measures more apparent and usable and by providing standards-based metadata and processing provenance. Development and operation of AppEEARS is led by the National Aeronautics and Space Administration (NASA) Land Processes Distributed Active Archive Center (LP DAAC). The LP DAAC also partners with several other archives to extend the capability across a larger federation of geospatial data providers. Over one hundred datasets are currently available, covering a diversity of variables including land cover, population, elevation, vegetation indices, and land surface temperature. Many hundreds of users have already used this new web-based capability to make the complex tasks of data integration and visualization much simpler and more efficient.

Text Mining in Cancer Gene and Pathway Prioritization

PubMed Central

Luo, Yuan; Riedlinger, Gregory; Szolovits, Peter

2014-01-01

Prioritization of cancer implicated genes has received growing attention as an effective way to reduce wet lab cost by computational analysis that ranks candidate genes according to the likelihood that experimental verifications will succeed. A multitude of gene prioritization tools have been developed, each integrating different data sources covering gene sequences, differential expressions, function annotations, gene regulations, protein domains, protein interactions, and pathways. This review places existing gene prioritization tools against the backdrop of an integrative Omic hierarchy view toward cancer and focuses on the analysis of their text mining components. We explain the relatively slow progress of text mining in gene prioritization, identify several challenges to current text mining methods, and highlight a few directions where more effective text mining algorithms may improve the overall prioritization task and where prioritizing the pathways may be more desirable than prioritizing only genes. PMID:25392685

Text mining in cancer gene and pathway prioritization.

PubMed

Luo, Yuan; Riedlinger, Gregory; Szolovits, Peter

2014-01-01

Prioritization of cancer implicated genes has received growing attention as an effective way to reduce wet lab cost by computational analysis that ranks candidate genes according to the likelihood that experimental verifications will succeed. A multitude of gene prioritization tools have been developed, each integrating different data sources covering gene sequences, differential expressions, function annotations, gene regulations, protein domains, protein interactions, and pathways. This review places existing gene prioritization tools against the backdrop of an integrative Omic hierarchy view toward cancer and focuses on the analysis of their text mining components. We explain the relatively slow progress of text mining in gene prioritization, identify several challenges to current text mining methods, and highlight a few directions where more effective text mining algorithms may improve the overall prioritization task and where prioritizing the pathways may be more desirable than prioritizing only genes.

Modeling of Instrument Landing System (ILS) localizer signal on runway 25L at Los Angeles International Airport

NASA Technical Reports Server (NTRS)

Hueschen, Richard M.; Knox, Charles E.

1994-01-01

A joint NASA/FAA flight test has been made to record instrument landing system (ILS) localizer receiver signals for use in mathematically modeling the ILS localizer for future simulation studies and airplane flight tracking tasks. The flight test was conducted on a portion of the ILS localizer installed on runway 25L at the Los Angeles International Airport. The tests covered the range from 10 to 32 n.mi. from the localizer antenna. Precision radar tracking information was compared with the recorded localizer deviation data. Data analysis showed that the ILS signal centerline was offset to the left of runway centerline by 0.071 degrees and that no significant bends existed on the localizer beam. Suggested simulation models for the ILS localizer are formed from a statistical analysis.

PEP solar array definition study

NASA Technical Reports Server (NTRS)

1979-01-01

The conceptual design of a large, flexible, lightweight solar array is presented focusing on a solar array overview assessment, solar array blanket definition, structural-mechanical systems definition, and launch/reentry blanket protection features. The overview assessment includes a requirements and constraints review, the thermal environment assessment on the design selection, an evaluation of blanket integration sequence, a conceptual blanket/harness design, and a hot spot analysis considering the effects of shadowing and cell failures on overall array reliability. The solar array blanket definition includes the substrate design, hinge designs and blanket/harness flexibility assessment. The structural/mechanical systems definition includes an overall loads and deflection assessment, a frequency analysis of the deployed assembly, a components weights estimate, design of the blanket housing and tensioning mechanism. The launch/reentry blanket protection task includes assessment of solar cell/cover glass cushioning concepts during ascent and reentry flight condition.

A study of the utilization of ERTS-1 data from the Wabash River Basin

NASA Technical Reports Server (NTRS)

Landgrebe, D. A. (Principal Investigator)

1973-01-01

The author has identified the following significant results. Nine projects are defined, five ERTS data applications experiments and four supporting technology tasks. The most significant applications results were achieved in the soil association mapping, earth surface feature identification, and urban land use mapping efforts. Four soil association boundaries were accurately delineated from ERTS-1 imagery. A data bank has been developed to test surface feature classifications obtained from ERTS-1 data. Preliminary forest cover classifications indicated that the number of acres estimated tended to be greater than actually existed by 25%. Urban land use analysis of ERTS-1 data indicated highly accurate classification could be obtained for many urban catagories. The wooded residential category tended to be misclassified as woods or agricultural land. Further statistical analysis revealed that these classes could be separated using sample variance.

Automating a Detailed Cognitive Task Analysis for Structuring Curriculum

DTIC Science & Technology

1991-06-01

Cognitive Task Analysis For... cognitive task analysis o3 0 chniques. A rather substantial literature has been amassed relative to _ - cutonqed knowledge acquisition but only seven...references have been found in LO V*r data base seaci of literature specifically addressing cognitive task analysis . - A variety of forms of cognitive task analysis

Minimum time search in uncertain dynamic domains with complex sensorial platforms.

PubMed

Lanillos, Pablo; Besada-Portas, Eva; Lopez-Orozco, Jose Antonio; de la Cruz, Jesus Manuel

2014-08-04

The minimum time search in uncertain domains is a searching task, which appears in real world problems such as natural disasters and sea rescue operations, where a target has to be found, as soon as possible, by a set of sensor-equipped searchers. The automation of this task, where the time to detect the target is critical, can be achieved by new probabilistic techniques that directly minimize the Expected Time (ET) to detect a dynamic target using the observation probability models and actual observations collected by the sensors on board the searchers. The selected technique, described in algorithmic form in this paper for completeness, has only been previously partially tested with an ideal binary detection model, in spite of being designed to deal with complex non-linear/non-differential sensorial models. This paper covers the gap, testing its performance and applicability over different searching tasks with searchers equipped with different complex sensors. The sensorial models under test vary from stepped detection probabilities to continuous/discontinuous differentiable/non-differentiable detection probabilities dependent on distance, orientation, and structured maps. The analysis of the simulated results of several static and dynamic scenarios performed in this paper validates the applicability of the technique with different types of sensor models.

Minimum Time Search in Uncertain Dynamic Domains with Complex Sensorial Platforms

PubMed Central

Lanillos, Pablo; Besada-Portas, Eva; Lopez-Orozco, Jose Antonio; de la Cruz, Jesus Manuel

2014-01-01

The minimum time search in uncertain domains is a searching task, which appears in real world problems such as natural disasters and sea rescue operations, where a target has to be found, as soon as possible, by a set of sensor-equipped searchers. The automation of this task, where the time to detect the target is critical, can be achieved by new probabilistic techniques that directly minimize the Expected Time (ET) to detect a dynamic target using the observation probability models and actual observations collected by the sensors on board the searchers. The selected technique, described in algorithmic form in this paper for completeness, has only been previously partially tested with an ideal binary detection model, in spite of being designed to deal with complex non-linear/non-differential sensorial models. This paper covers the gap, testing its performance and applicability over different searching tasks with searchers equipped with different complex sensors. The sensorial models under test vary from stepped detection probabilities to continuous/discontinuous differentiable/non-differentiable detection probabilities dependent on distance, orientation, and structured maps. The analysis of the simulated results of several static and dynamic scenarios performed in this paper validates the applicability of the technique with different types of sensor models. PMID:25093345

International Space Station Increment Operations Services

NASA Astrophysics Data System (ADS)

Michaelis, Horst; Sielaff, Christian

2002-01-01

The Industrial Operator (IO) has defined End-to-End services to perform efficiently all required operations tasks for the Manned Space Program (MSP) as agreed during the Ministerial Council in Edinburgh in November 2001. Those services are the result of a detailed task analysis based on the operations processes as derived from the Space Station Program Implementation Plans (SPIP) and defined in the Operations Processes Documents (OPD). These services are related to ISS Increment Operations and ATV Mission Operations. Each of these End-to-End services is typically characterised by the following properties: It has a clearly defined starting point, where all requirements on the end-product are fixed and associated performance metrics of the customer are well defined. It has a clearly defined ending point, when the product or service is delivered to the customer and accepted by him, according to the performance metrics defined at the start point. The implementation of the process might be restricted by external boundary conditions and constraints mutually agreed with the customer. As far as those are respected the IO has the free choice to select methods and means of implementation. The ISS Increment Operations Service (IOS) activities required for the MSP Exploitation program cover the complete increment specific cycle starting with the support to strategic planning and ending with the post increment evaluation. These activities are divided into sub-services including the following tasks: - ISS Planning Support covering the support to strategic and tactical planning up to the generation - Development &Payload Integration Support - ISS Increment Preparation - ISS Increment Execution These processes are tight together by the Increment Integration Management, which provides the planning and scheduling of all activities as well as the technical management of the overall process . The paper describes the entire End-to-End ISS Increment Operations service and the implementation to support the Columbus Flight 1E related increment and subsequent ISS increments. Special attention is paid to the implications caused by long term operations on hardware, software and operations personnel.

Automating a Detailed Cognitive Task Analysis for Structuring Curriculum

DTIC Science & Technology

1991-08-01

1991-- ] Aleeo/i ISM’-19# l Title: Automating a Detailed Cognitive Task Analysis for Structuring Curriculum Activities: To date we have completed task...The Institute for Management Sciences. Although the particular application of the modified GOMS cognitive task analysis technique under development is...Laboratories 91 9 23 074 Automnating a Detailed Cognitive Task Analysis For Stucuring Curriculum Research Plan Year 1 Task 1.0 Design Task 1.1 Conduct body

Usefulness of the group-comparison method to demonstrate sex differences in spatial orientation and spatial visualization in older men and women.

PubMed

Cohen, D

1976-10-01

This paper reports an analysis of sex differences in cognitive test scores covering the dimensions of spatial orientation and spatial visualization in groups of 6 older men and 6 women matched for speed of performance on a maze test and level of performance on a spatial relations task. Older men were more proficient solving spatial problems using the body as a referent, whereas there was no significant difference between the sexes in imagining spatial displacement. Matched comparisons appear a useful adjunct to population research to understand the type(s) of cognitive processes where differential performance by the sexes is observed.

2016 Consequence Management Advisory Division's (CMAD) Annual Report

EPA Pesticide Factsheets

CMAD annual report for 2016 which covers activities such as radiation task force leaders annual training, national criminal enforcement response team annual training, field technology demonstrations, and a new method to detect perfluorinated compounds.

Heuristic Analysis Model of Nitrided Layers’ Formation Consisting of the Image Processing and Analysis and Elements of Artificial Intelligence

PubMed Central

Wójcicki, Tomasz; Nowicki, Michał

2016-01-01

The article presents a selected area of research and development concerning the methods of material analysis based on the automatic image recognition of the investigated metallographic sections. The objectives of the analyses of the materials for gas nitriding technology are described. The methods of the preparation of nitrided layers, the steps of the process and the construction and operation of devices for gas nitriding are given. We discuss the possibility of using the methods of digital images processing in the analysis of the materials, as well as their essential task groups: improving the quality of the images, segmentation, morphological transformations and image recognition. The developed analysis model of the nitrided layers formation, covering image processing and analysis techniques, as well as selected methods of artificial intelligence are presented. The model is divided into stages, which are formalized in order to better reproduce their actions. The validation of the presented method is performed. The advantages and limitations of the developed solution, as well as the possibilities of its practical use, are listed. PMID:28773389

Using a Knowledge Representations Approach to Cognitive Task Analysis.

ERIC Educational Resources Information Center

Black, John B.; And Others

Task analyses have traditionally been framed in terms of overt behaviors performed in accomplishing tasks and goals. Pioneering work at the Learning Research and Development Center looked at what contribution a cognitive analysis might make to current task analysis procedures, since traditional task analysis methods neither elicit nor capture…

GeoVision Exploration Task Force Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doughty, Christine; Dobson, Patrick F.; Wall, Anna

The GeoVision study effort included ground-breaking, detailed research on current and future market conditions and geothermal technologies in order to forecast and quantify the electric and non-electric deployment potentials under a range of scenarios, in addition to their impacts on the Nation’s jobs, economy and environment. Coordinated by the U.S. Department of Energy’s (DOE’s) Geothermal Technologies Office (GTO), the GeoVision study development relied on the collection, modeling, and analysis of robust datasets through seven national laboratory partners, which were organized into eight technical Task Force groups. The purpose of this report is to provide a central repository for the researchmore » conducted by the Exploration Task Force. The Exploration Task Force consists of four individuals representing three national laboratories: Patrick Dobson (task lead) and Christine Doughty of Lawrence Berkeley National Laboratory, Anna Wall of National Renewable Energy Laboratory, Travis McLing of Idaho National Laboratory, and Chester Weiss of Sandia National Laboratories. As part of the GeoVision analysis, our team conducted extensive scientific and financial analyses on a number of topics related to current and future geothermal exploration methods. The GeoVision Exploration Task Force complements the drilling and resource technology investigations conducted as part of the Reservoir Maintenance and Development Task Force. The Exploration Task Force however has focused primarily on early stage R&D technologies in exploration and confirmation drilling, along with an evaluation of geothermal financing challenges and assumptions, and innovative “blue-sky” technologies. This research was used to develop geothermal resource supply curves (through the use of GETEM) for use in the ReEDS capacity expansion modeling that determines geothermal technology deployment potential. It also catalogues and explores the large array of early-stage R&D technologies with the potential to dramatically reduce exploration and geothermal development costs, forming the basis of the GeoVision Technology Improvement (TI) scenario. These modeling topics are covered in detail in Potential to Penetration task force report. Most of the research contained herein has been published in peer-reviewed papers or conference proceedings and are cited and referenced accordingly. The sections that follow provide a central repository for all of the research findings of the Exploration and Confirmation Task Force. In summary, it provides a comprehensive discussion of Engineered Geothermal Systems (EGS) and associated technology challenges, the risks and costs of conducting geothermal exploration, a review of existing government efforts to date in advancing early-stage R&D in both exploration and EGS technologies, as well as a discussion of promising and innovative technologies and implementation of blue-sky concepts that could significantly reduce costs, lower risks, and shorten the time needed to explore and develop geothermal resources of all types.« less

Computing shifts to monitor ATLAS distributed computing infrastructure and operations

NASA Astrophysics Data System (ADS)

Adam, C.; Barberis, D.; Crépé-Renaudin, S.; De, K.; Fassi, F.; Stradling, A.; Svatos, M.; Vartapetian, A.; Wolters, H.

2017-10-01

The ATLAS Distributed Computing (ADC) group established a new Computing Run Coordinator (CRC) shift at the start of LHC Run 2 in 2015. The main goal was to rely on a person with a good overview of the ADC activities to ease the ADC experts’ workload. The CRC shifter keeps track of ADC tasks related to their fields of expertise and responsibility. At the same time, the shifter maintains a global view of the day-to-day operations of the ADC system. During Run 1, this task was accomplished by a person of the expert team called the ADC Manager on Duty (AMOD), a position that was removed during the shutdown period due to the reduced number and availability of ADC experts foreseen for Run 2. The CRC position was proposed to cover some of the AMODs former functions, while allowing more people involved in computing to participate. In this way, CRC shifters help with the training of future ADC experts. The CRC shifters coordinate daily ADC shift operations, including tracking open issues, reporting, and representing ADC in relevant meetings. The CRC also facilitates communication between the ADC experts team and the other ADC shifters. These include the Distributed Analysis Support Team (DAST), which is the first point of contact for addressing all distributed analysis questions, and the ATLAS Distributed Computing Shifters (ADCoS), which check and report problems in central services, sites, Tier-0 export, data transfers and production tasks. Finally, the CRC looks at the level of ADC activities on a weekly or monthly timescale to ensure that ADC resources are used efficiently.

Deep Learning for Classification of Colorectal Polyps on Whole-slide Images.

PubMed

Korbar, Bruno; Olofson, Andrea M; Miraflor, Allen P; Nicka, Catherine M; Suriawinata, Matthew A; Torresani, Lorenzo; Suriawinata, Arief A; Hassanpour, Saeed

2017-01-01

Histopathological characterization of colorectal polyps is critical for determining the risk of colorectal cancer and future rates of surveillance for patients. However, this characterization is a challenging task and suffers from significant inter- and intra-observer variability. We built an automatic image analysis method that can accurately classify different types of colorectal polyps on whole-slide images to help pathologists with this characterization and diagnosis. Our method is based on deep-learning techniques, which rely on numerous levels of abstraction for data representation and have shown state-of-the-art results for various image analysis tasks. Our method covers five common types of polyps (i.e., hyperplastic, sessile serrated, traditional serrated, tubular, and tubulovillous/villous) that are included in the US Multisociety Task Force guidelines for colorectal cancer risk assessment and surveillance. We developed multiple deep-learning approaches by leveraging a dataset of 2074 crop images, which were annotated by multiple domain expert pathologists as reference standards. We evaluated our method on an independent test set of 239 whole-slide images and measured standard machine-learning evaluation metrics of accuracy, precision, recall, and F1 score and their 95% confidence intervals. Our evaluation shows that our method with residual network architecture achieves the best performance for classification of colorectal polyps on whole-slide images (overall accuracy: 93.0%, 95% confidence interval: 89.0%-95.9%). Our method can reduce the cognitive burden on pathologists and improve their efficacy in histopathological characterization of colorectal polyps and in subsequent risk assessment and follow-up recommendations.

Comparative Cognitive Task Analysis

DTIC Science & Technology

2007-01-01

is to perform a task analyses to determine how people operate in a specific domain on a specific task. Cognitive Task Analysis (CTA) is a set of...accomplish a task. In this chapter, we build on CTA methods by suggesting that comparative cognitive task analysis (C2TA) can help solve the aforementioned

Correlations between Physical Fitness Tests and Performance of Military Tasks: A Systematic Review and Meta-Analyses

DTIC Science & Technology

2014-06-30

U.S. Army Public Health Command Correlations between Physical Fitness Tests and Performance of Military Tasks: A Systematic Review and Meta...30 JUN 2014 2. REPORT TYPE Final 3. DATES COVERE D 4. TITLE AN D SUBTITLE Correlations between Physical Fitness Tests and Performance of... Physical Fitness Test (APFT) and ensure a future test is associated with Soldiers’ performance of common physical job requirements, the USAPHC applied

RMA Abandoned Well Closure Program. Final Task Plan, Version 3.0.

DTIC Science & Technology

1989-05-01

20503. 1 . AGENCY USE ONLY (Leave blank) 2. REPORT DATE" 0 3. REPORT TYPE AND DATES COVERED _T 05/00/89 __________________ 4. TITLE AND SUBTITLE S...AQUIFERS. THE SCOPE OF WORK INCLUDES: 1 . COMPILATION OF A WELL INVENTORY AND DATABASE 2. FIELD LOCATION OF WELLS 3. CLEANING AND CLOSURE OF...APPROXIMATELY 350 WELT- 4. DOCUMENTATION OF CLOSURE ACTIVITIES. SECTIONS OF THIS TASK PLAN DETAIL-INFORMATION ON: 1 . ABANDONED WELL IDENTIFICATION AND LOCATION

Twelfth Annual Conference on Manual Control

NASA Technical Reports Server (NTRS)

Wempe, T. E.

1976-01-01

Main topics discussed cover multi-task decision making, attention allocation and workload measurement, displays and controls, nonvisual displays, tracking and other psychomotor tasks, automobile driving, handling qualities and pilot ratings, remote manipulation, system identification, control models, and motion and visual cues. Sixty-five papers are included with presentations on results of analytical studies to develop and evaluate human operator models for a range of control task, vehicle dynamics and display situations; results of tests of physiological control systems and applications to medical problems; and on results of simulator and flight tests to determine display, control and dynamics effects on operator performance and workload for aircraft, automobile, and remote control systems.

Comparison of Spacecraft Contamination Models with Well-Defined Flight Experiment

NASA Technical Reports Server (NTRS)

Pippin, G. H.

1998-01-01

The report presents analyzed surface areas on particular experiment trays from the Long Duration Exposure Facility (LDEF) for silicone-based molecular contamination. The trays for examination were part of the Ultra-Heavy Cosmic Ray Experiment (UHCRE). These particular trays were chosen because each tray was identical to the others in construction, and the materials on each tray were well known, documented, and characterized. In particular, a known specific source of silicone contamination was present on each tray. Only the exposure conditions varied from tray to tray. The results of post-flight analyses of surfaces of three trays were compared with the predictions of the three different spacecraft molecular contamination models. Phase one tasks included: 1) documenting the detailed geometry of the hardware; 2) determining essential properties of the anodized aluminum, Velcro(Tm), silverized Teflon(Tm), silicone gaskets, and DC6-1104(Tm) silicone adhesive materials used to make the trays, tray covers, and thermal control blankets; 3) selecting and removing areas from each tray; and 4) beginning surface analysis of the selected tray walls. Phase two tasks included: 1) completion of surface analysis measurements of the selected tray surface, 2) obtaining auger depth profiles at selected locations, and 3) running versions of the ISEM, MOFLUX, and PLIMP (Plume Impingement) contamination prediction models and making comparisons with experimental results.

Integrating knowledge-based multi-criteria evaluation techniques with GIS for landfill site selection: A case study using AHP

NASA Astrophysics Data System (ADS)

Fagbohun, B. J.; Aladejana, O. O.

2016-09-01

A major challenge in most growing urban areas of developing countries, without a pre-existing land use plan is the sustainable and efficient management of solid wastes. Siting a landfill is a complicated task because of several environmental regulations. This challenge gives birth to the need to develop efficient strategies for the selection of proper waste disposal sites in accordance with all existing environmental regulations. This paper presents a knowledge-based multi-criteria decision analysis using GIS for the selection of suitable landfill site in Ado-Ekiti, Nigeria. In order to identify suitable sites for landfill, seven factors - land use/cover, geology, river, soil, slope, lineament and roads - were taken into consideration. Each factor was classified and ranked based on prior knowledge about the area and existing guidelines. Weights for each factor were determined through pair-wise comparison using Saaty's 9 point scale and AHP. The integration of factors according to their weights using weighted index overlay analysis revealed that 39.23 km2 within the area was suitable to site a landfill. The resulting suitable area was classified as high suitability covering 6.47 km2 (16.49%), moderate suitability 25.48 km2 (64.95%) and low suitability 7.28 km2 (18.56%) based on their overall weights.

Effects of a cognitive modulator in the theta and alpha asymmetry during a typewriting task: a sensorimotor integration perspective.

PubMed

Cunha, Marlo; Machado, Sergio; Miana, Luiz Cláudio; Machado, Dionis; Bastos, Victor Hugo; Velasques, Bruna; Cagy, Maurício; Basile, Luis F; Piedade, Roberto; Ribeiro, Pedro

2009-06-01

This study aimed to elucidate cortical mechanisms and to identify the areas where occur such mechanisms due to interaction between bromazepam and motor learning. The sample was composed of 45 healthy subjects randomly distributed in 3 groups: placebo (n=15), bromazepam 3 mg (n=15) or bromazepam 6 mg (n=15). To perform the experimental task, subjects sat comfortably at a distance of approximately 20 cm from the typewriter. The typewriter keyboard was covered with a wooden box to avoid visual information about the hands' position. The typewriting task was performed concomitantly with EEG recording. ANOVA two-way results indicated a decreased asymmetry in sensorimotor areas in the experimental groups. Our interpretation is that moderate doses of bromazepam may improve performance on tasks with predictable elements to promote stability of psychomotor functions, but may also impair performance on tasks executed in unpredictable environments.

Robotics/Automated Systems Task Analysis and Description of Required Job Competencies Report. Task Analysis and Description of Required Job Competencies of Robotics/Automated Systems Technicians.

ERIC Educational Resources Information Center

Hull, Daniel M.; Lovett, James E.

This task analysis report for the Robotics/Automated Systems Technician (RAST) curriculum project first provides a RAST job description. It then discusses the task analysis, including the identification of tasks, the grouping of tasks according to major areas of specialty, and the comparison of the competencies to existing or new courses to…

Three-dimensional rendering of segmented object using matlab - biomed 2010.

PubMed

Anderson, Jeffrey R; Barrett, Steven F

2010-01-01

The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.

Tank vapor mitigation requirements for Hanford Tank Farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rakestraw, L.D.

1994-11-15

Westinghouse Hanford Company has contracted Los Alamos Technical Associates to listing of vapors and aerosols that are or may be emitted from the High Level Waste (HLW) tanks at Hanford. Mitigation requirements under Federal and State law, as well as DOE Orders, are included in the listing. The lists will be used to support permitting activities relative to tank farm ventilation system up-grades. This task is designated Task 108 under MJB-SWV-312057 and is an extension of efforts begun under Task 53 of Purchase Order MPB-SVV-03291 5 for Mechanical Engineering Support. The results of that task, which covered only thirty-nine tanks,more » are repeated here to provide a single source document for vapor mitigation requirements for all 177 HLW tanks.« less

A study of performance assessment task organization in high school optics

NASA Astrophysics Data System (ADS)

Zawicki, Joseph Leo

2002-01-01

This investigation was undertaken to validate three performance assessment tasks in high school physics. The tasks that were studied were developed around three organizational models of performance assessments: integrated, independent and surrogate. The integrated model required students to answer questions, make observations and demonstrate skills related to the index of refraction of a particular material. All of the questions and activities the students completed were related to a sample of a particular plastic sample that was the focus of this task. The independent model is analogous to the station model that is currently used on three New York State assessments: the Grade 4 - Elementary Science Program Evaluation Test, the Intermediate Level Science (ILS) Test, and the Physical Setting: Earth Science Regents Exam. Students took measurements related to the index of refraction of a plastic sample that was the focus of the initial portion of this task; the remaining questions on the assessment were generally related to the concept of the index of refraction but did not refer back to the initial sample. The final task organization followed the surrogate model. In this model, students reviewed data that was collected and analyzed by other (fictitious) students. The students completing this task were asked to review the work presented on this assessment for errors; they evaluated the conclusions and statements presented on the assessment. Students were also asked to determine if the student work was acceptable or if this investigation should be repeated. Approximately 300 students from urban, suburban and rural districts across Western New York State participated in the study. The tasks were administered during the spring semester of the 2000--2001 school year. The participating schools had at least covered the topic of refraction, both in classroom lectures and in laboratory activities. Each student completed only one form of the task---either the integrated, the independent or the surrogate form. A set of ten questions, compiled from past New York State Regents Examinations in Physics, was used as an additional measurement of student conceptual understanding. This question set was identified as the "Optics Baseline Test" (OBT). Additionally, classroom teachers ranked the academic performance of each of the students in their classroom on the outcomes of the physics course; these rankings were compared with student scores on the performance assessment tasks. The process skills incorporated within the individual questions on each task were reviewed by a panel of expert teachers. Student scores on the tasks themselves were examined using a principal component analysis. This analysis provided support for the process skill subtests organized around the general process skills of planning, performing, and reasoning. Scoring guides and inter-rater reliabilities were established for each task. The reliabilities for tasks, subtests and questions were fairly high, indicting adequate task reliability. Correlations between student performance on the individual tasks and the OBT were not significant. Teacher ranking of student achievement in individual classrooms also failed to correlate significantly with student performance on tasks. The lack of correlation could be attributed to several factors, including (among others) a wide range of student opportunities to learn from the seven schools in the sample. As has been reported in the performance assessment literature, there were no significant differences between the performance of male and female students. (Abstract shortened by UMI.)

Developing a Systematic Corrosion Control Evaluation Approach in Flint

EPA Science Inventory

Presentation covers what the projects were that were recommended by the Flint Safe Drinking Water Task Force for corrosion control assessment for Flint, focusing on the sequential sampling project, the pipe rigs, and pipe scale analyses.

Applying Cognitive Work Analysis to Time Critical Targeting Functionality

DTIC Science & Technology

2004-10-01

Cognitive Task Analysis , CTA, Cognitive Task Analysis , Human Factors, GUI, Graphical User Interface, Heuristic Evaluation... Cognitive Task Analysis MITRE Briefing January 2000 Dynamic Battle Management Functional Architecture 3-1 Section 3 Human Factors...clear distinction between Cognitive Work Analysis (CWA) and Cognitive Task Analysis (CTA), therefore this document will refer to these

Evaluating a Computerized Aid for Conducting a Cognitive Task Analysis

DTIC Science & Technology

2000-01-01

in conducting a cognitive task analysis . The conduct of a cognitive task analysis is costly and labor intensive. As a result, a few computerized aids...evaluation of a computerized aid, specifically CAT-HCI (Cognitive Analysis Tool - Human Computer Interface), for the conduct of a detailed cognitive task analysis . A

Helicopter roll control effectiveness criteria program summary

NASA Technical Reports Server (NTRS)

Heffley, Robert K.; Bourne, Simon M.; Mnich, Marc A.

1988-01-01

A study of helicopter roll control effectiveness is summarized for the purpose of defining military helicopter handling qualities requirements. The study is based on an analysis of pilot-in-the-loop task performance of several basic maneuvers. This is extended by a series of piloted simulations using the NASA Ames Vertical Motion Simulator and selected flight data. The main results cover roll control power and short-term response characteristics. In general the handling qualities requirements recommended are set in conjunction with desired levels of flight task and maneuver response which can be directly observed in actual flight. An important aspect of this, however, is that vehicle handling qualities need to be set with regard to some quantitative aspect of mission performance. Specific examples of how this can be accomplished include a lateral unmask/remask maneuver in the presence of a threat and an air tracking maneuver which recognizes the kill probability enhancement connected with decreasing the range to the target. Conclusions and recommendations address not only the handling qualities recommendations, but also the general use of flight simulators and the dependence of mission performance on handling qualities.

Application of speech recognition and synthesis in the general aviation cockpit

NASA Technical Reports Server (NTRS)

North, R. A.; Mountford, S. J.; Bergeron, H.

1984-01-01

Interactive speech recognition/synthesis technology is assessed as a method for the aleviation of single-pilot IFR flight workloads. Attention was given during this series of evaluations to the conditions typical of general aviation twin-engine aircrft cockpits, covering several commonly encountered IFR flight condition scenarios. The most beneficial speech command tasks are noted to be in the data retrieval domain, which would allow the pilot access to uplinked data, checklists, and performance charts. Data entry tasks also appear to benefit from this technology.

Test Administrator's Handbook and Student Instructions for Job-Task Performance Tests for Doppler Radar, AN/APN-147 and its Computer AN/ASN-35, and Associated Test Equipment and Hand Tools. Report for June-December 1972.

ERIC Educational Resources Information Center

Matrix Research Co., Alexandria, VA.

The handbook covers a comprehensive series of Job-Task Performance Tests for the Doppler Radar (AN/APN) and its Associated Computer (AN/ASN-35). The test series has been developed to measure job performance of the electronic technician. These tests encompass all phases of day-to-day preventative and corrective maintenance that technicians are…

Report of the Task Force on Specifications and Standards

DTIC Science & Technology

1977-04-01

pro- cedures covering interim changes or corrections to specifications and standar (ls required to effect a procurement . A language change was proposed...DEFENSE SCIENCE BOARD SREPORT OF THE TASK FORCE ON 0 ’SPECIFICATIONS AND STANDARDS APRIL 1977 I S-J APPROVED FOR PUBLIC RELEASE; DISTRIBUTION...FORCE ON SPECIFICATIONS aSTANDARDS :::nm,1UTION STA T,~~ i vl for public Weeae; .-Aibution Ulnlimited Office of, 11h1 I irel-4,r. I )eh- iss R se rc

More Capable Warfighting Through Reduced Fuel Burden. The Defense Science Board Task Force on Improving Fuel Efficiency of Weapons Platforms

DTIC Science & Technology

2001-01-01

Date 00 Jan 2001 Report Type N/A Dates Covered (from... to) - Title and Subtitle The Defense Science Board Task Force on Improving Fuel Efficency ...equipment, people , facilities and other overhead costs) known, understood and factored into the cost of fuel, there would be proper visibility to focus...work- ES- 7 logistics shortfalls impose on operational commanders. Logistics should be played and when it breaks, wargamers must account for it rather

Novel Genetic Models to Study the Role of Inflammation in Brain Injury-Induced Alzheimer’s Pathology

DTIC Science & Technology

2013-10-01

REPORT TYPE Annual 3. DATES COVERED 30 Sep 2012 – 29 Sep 2013 4 . TITLE AND SUBTITLE 5a. CONTRACT NUMBER Novel Genetic Models to Study the Role...infiltration and activation of monocytes due to disruption of the blood-brain barrier [ 4 -6]. Assessing the exact roles of these cells in AD pathogenesis...paradigm of TBI Statement of Work: Task 1. Generate animals required for studies (timeframe, months 2- 4 ) Task 2. Perform FPI (timeframe, months 4 -8

Addendum: Development of a preprototype times wastewater recovery subsystem

NASA Technical Reports Server (NTRS)

Dehner, G. F.

1984-01-01

The results of the second generation operational improvements and the TIMES (Thermoelectric Integrated Membrane Evaporation Subsystem) 2 study are covered. Areas covered in the second generation operational improvements are improved temperature control, water quality improvements, subsytem operational improvements, solid handling improvements, wastewater pretreatment optimization, and membrane rejuvenation concepts. The task for the TIMES 2 study are thermoelectric regenerator improvement, recycle loop pH operational criteria, recycle loop component optimization, and hollow fiber membrane evaporator improvement. Results are presented and conclusions are drawn from both studies.

Training Objectives for Tank Platoon Leaders Covering Tasks Performed during Four Armor Operations

DTIC Science & Technology

1983-01-01

screens to conceal their movement to covered and concealed positions. The M250 grenade launcher consists of two six-barreled dischargers wired for two...generates smoke by the injestion of fuel onto the hot engine exhaust system. The smoke screen generated by VEESS is used to compli- ment the M250 smoke...grenade system by reinforcing and sustaining the screen created by the M250 system. The purpose of the smoke producing systems is to make it more

Range Scheduling Aid (RSA)

NASA Technical Reports Server (NTRS)

Logan, J. R.; Pulvermacher, M. K.

1991-01-01

Range Scheduling Aid (RSA) is presented in the form of the viewgraphs. The following subject areas are covered: satellite control network; current and new approaches to range scheduling; MITRE tasking; RSA features; RSA display; constraint based analytic capability; RSA architecture; and RSA benefits.

Effects of Cognitive Load on Trust

DTIC Science & Technology

2011-11-01

individualistic culture ; (2) examining the relationship between cognitive load and trust. 15. SUBJECT TERMS Cognitive Psychology , Behavioural...This report covers results of two research tasks: (1) evaluating the relative strength of Mayer?s trustworthiness indicators in both a collectivistic and

Mining protein-protein interaction networks: denoising effects

NASA Astrophysics Data System (ADS)

Marras, Elisabetta; Capobianco, Enrico

2009-01-01

A typical instrument to pursue analysis in complex network studies is the analysis of the statistical distributions. They are usually computed for measures which characterize network topology, and are aimed at capturing both structural and dynamics aspects. Protein-protein interaction networks (PPIN) have also been studied through several measures. It is in general observed that a power law is expected to characterize scale-free networks. However, mixing the original noise cover with outlying information and other system-dependent fluctuations makes the empirical detection of the power law a difficult task. As a result the uncertainty level increases when looking at the observed sample; in particular, one may wonder whether the computed features may be sufficient to explain the interactome. We then address noise problems by implementing both decomposition and denoising techniques that reduce the impact of factors known to affect the accuracy of power law detection.

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOLID OXIDE FUEL CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2003-12-08

The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with the option of piped-in water (Demonstration System A). Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burnmore » internal combustion engine. This technical progress report covers work performed by Delphi from January 1, 2003 to June 30, 2003, under Department of Energy Cooperative Agreement DE-FC-02NT41246. This report highlights technical results of the work performed under the following tasks: Task 1 System Design and Integration; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant (BOP) Components; Task 5 Manufacturing Development (Privately Funded); Task 6 System Fabrication; Task 7 System Testing; Task 8 Program Management; and Task 9 Stack Testing with Coal-Based Reformate.« less

Quantitative evaluation of variations in rule-based classifications of land cover in urban neighbourhoods using WorldView-2 imagery.

PubMed

Belgiu, Mariana; Dr Guţ, Lucian; Strobl, Josef

2014-01-01

The increasing availability of high resolution imagery has triggered the need for automated image analysis techniques, with reduced human intervention and reproducible analysis procedures. The knowledge gained in the past might be of use to achieving this goal, if systematically organized into libraries which would guide the image analysis procedure. In this study we aimed at evaluating the variability of digital classifications carried out by three experts who were all assigned the same interpretation task. Besides the three classifications performed by independent operators, we developed an additional rule-based classification that relied on the image classifications best practices found in the literature, and used it as a surrogate for libraries of object characteristics. The results showed statistically significant differences among all operators who classified the same reference imagery. The classifications carried out by the experts achieved satisfactory results when transferred to another area for extracting the same classes of interest, without modification of the developed rules.

Quantitative evaluation of variations in rule-based classifications of land cover in urban neighbourhoods using WorldView-2 imagery

PubMed Central

Belgiu, Mariana; Drǎguţ, Lucian; Strobl, Josef

2014-01-01

The increasing availability of high resolution imagery has triggered the need for automated image analysis techniques, with reduced human intervention and reproducible analysis procedures. The knowledge gained in the past might be of use to achieving this goal, if systematically organized into libraries which would guide the image analysis procedure. In this study we aimed at evaluating the variability of digital classifications carried out by three experts who were all assigned the same interpretation task. Besides the three classifications performed by independent operators, we developed an additional rule-based classification that relied on the image classifications best practices found in the literature, and used it as a surrogate for libraries of object characteristics. The results showed statistically significant differences among all operators who classified the same reference imagery. The classifications carried out by the experts achieved satisfactory results when transferred to another area for extracting the same classes of interest, without modification of the developed rules. PMID:24623959

Scientific and Technical Support for the Galileo Net Flux Radiometer Experiment

NASA Technical Reports Server (NTRS)

Sromovsky, Lawrence A.

1997-01-01

This report describes work in support of the Galileo Net Flux Radiometer (NFR), an instrument mounted on the Galileo probe, a spacecraft designed for entry into and direct measurements of Jupiter's atmosphere. Tasks originally proposed for the post launch period covered by NCC 2-854 are briefly as follows: attend and support PSG (Project Science Group) and other project science meetings; support in-flight checkouts; maintain and keep safe the spare instrument and GSE (Ground Support Equipment); organize and maintain documentation; finish NFR calibration measurements, documentation, and analysis; characterize and diagnose instrument anomalies; develop descent data analysis tools; and science data analysis and publication. Because we had the capability to satisfy a project support need we also subsequently proposed and were funded to make ground-based observations of Jupiter during the period surrounding the Galileo arrival at Jupiter, using the Swedish Solar Telescope at La Palma, Canary Islands. The following section provides background information on the NFR instrument. Section 3 contains the final report of work done.

Unmanned and Unattended Response Capability for Homeland Defense

DOE Office of Scientific and Technical Information (OSTI.GOV)

BENNETT, PHIL C.

2002-11-01

An analysis was conducted of the potential for unmanned and unattended robotic technologies for forward-based, immediate response capabilities that enables access and controlled task performance. The authors analyze high-impact response scenarios in conjunction with homeland security organizations, such as the NNSA Office of Emergency Response, the FBI, the National Guard, and the Army Technical Escort Unit, to cover a range of radiological, chemical and biological threats. They conducted an analysis of the potential of forward-based, unmanned and unattended robotic technologies to accelerate and enhance emergency and crisis response by Homeland Defense organizations. Response systems concepts were developed utilizing new technologiesmore » supported by existing emerging threats base technologies to meet the defined response scenarios. These systems will pre-position robotic and remote sensing capabilities stationed close to multiple sites for immediate action. Analysis of assembled systems included experimental activities to determine potential efficacy in the response scenarios, and iteration on systems concepts and remote sensing and robotic technologies, creating new immediate response capabilities for Homeland Defense.« less

Quantitative evaluation of variations in rule-based classifications of land cover in urban neighbourhoods using WorldView-2 imagery

NASA Astrophysics Data System (ADS)

Belgiu, Mariana; ǎguţ, Lucian, , Dr; Strobl, Josef

2014-01-01

The increasing availability of high resolution imagery has triggered the need for automated image analysis techniques, with reduced human intervention and reproducible analysis procedures. The knowledge gained in the past might be of use to achieving this goal, if systematically organized into libraries which would guide the image analysis procedure. In this study we aimed at evaluating the variability of digital classifications carried out by three experts who were all assigned the same interpretation task. Besides the three classifications performed by independent operators, we developed an additional rule-based classification that relied on the image classifications best practices found in the literature, and used it as a surrogate for libraries of object characteristics. The results showed statistically significant differences among all operators who classified the same reference imagery. The classifications carried out by the experts achieved satisfactory results when transferred to another area for extracting the same classes of interest, without modification of the developed rules.

Cognitive task analysis: Techniques applied to airborne weapons training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terranova, M.; Seamster, T.L.; Snyder, C.E.

1989-01-01

This is an introduction to cognitive task analysis as it may be used in Naval Air Systems Command (NAVAIR) training development. The focus of a cognitive task analysis is human knowledge, and its methods of analysis are those developed by cognitive psychologists. This paper explains the role that cognitive task analysis and presents the findings from a preliminary cognitive task analysis of airborne weapons operators. Cognitive task analysis is a collection of powerful techniques that are quantitative, computational, and rigorous. The techniques are currently not in wide use in the training community, so examples of this methodology are presented alongmore » with the results. 6 refs., 2 figs., 4 tabs.« less

A Method for Cognitive Task Analysis

DTIC Science & Technology

1992-07-01

A method for cognitive task analysis is described based on the notion of ’generic tasks’. The method distinguishes three layers of analysis. At the...model for applied areas such as the development of knowledge-based systems and training, are discussed. Problem solving, Cognitive Task Analysis , Knowledge, Strategies.

Using Cognitive Task Analysis and Eye Tracking to Understand Imagery Analysis

DTIC Science & Technology

2006-01-01

Using Cognitive Task Analysis and Eye Tracking to Understand Imagery Analysis Laura Kurland, Abigail Gertner, Tom Bartee, Michael Chisholm and...have used these to study the analysts search behavior in detail. 2 EXPERIMENT Using a Cognitive Task Analysis (CTA) framework for knowledge...TITLE AND SUBTITLE Using Cognitive Task Analysis and Eye Tracking to Understand Imagery Analysis 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

Integrating Cognitive Task Analysis into Instructional Systems Development.

ERIC Educational Resources Information Center

Ryder, Joan M.; Redding, Richard E.

1993-01-01

Discussion of instructional systems development (ISD) focuses on recent developments in cognitive task analysis and describes the Integrated Task Analysis Model, a framework for integrating cognitive and behavioral task analysis methods within the ISD model. Three components of expertise are analyzed: skills, knowledge, and mental models. (96…

Human factors evaluation of TSO-C129A GPS receivers

DOT National Transportation Integrated Search

1998-10-22

This report documents an evaluation of the usability of TSO-C129a-certified Global Positioning System (GPS) receivers. Bench and flight tests were conducted on six GPS receivers. The evaluations covered 23 flight tasks. Both subjective and objective ...

Development of a decision support system for crop disease monitoring, surveillance and prediction in Bomet county, Kenya

NASA Astrophysics Data System (ADS)

Otieno, O. M.

2015-12-01

The study proposes to use Geographic Information Systems and Remote Sensing techniques to spatially model Maize Lethal Necrosis (MLN) disease in maize growing areas in Kenya. Results from this work will be used for prediction, monitoring and to guide intervention on MLN. This will minimize maize yield losses resulting from MLN infestation and thus safeguard the livelihoods of maize farmers in Kenya. MLN was first reported in Kenya in September 2011 in Bomet county. It then subsequently spread to other parts in Kenya. Maize crops are susceptible to MLN at all growth stages. Once infected the only option left for the farmers is to burn their maize plantations. Infection rate and damage is very high affecting yields and sometimes causing complete loss of maize yield.The modelling exercise will cover the period prior to and after the incidence of MLN. Specifically, the analysis will integrate spatio-temporal information on maize phenology and field surveys with the intention of delineating the extent of MLN infestation and the degree of damage as a result of MLN. Additionally, the task will identify potential predisposing factors leading to MLN resurgence and spread and to predict potential areas where MLN is likely to spread and to estimate the potential impact of MLN on the farm holders. The area of study for this task will be Bomet County. Historical and current environmental and spatial indicators including temperature, rainfall, soil moisture, vegetation health and crop cover will be fed into a model in order to determine the main factors that aide the occurrence and the spread of MLN. Multi-spectral image processing will be used to produce indices to study maize crop health whilst image classification techniques will be used to identify crop cover clusters by differentiating the variations in spectral signatures in the area of study and hence distinguish infected, unaffected maize crops and other crop cover classes. Variables from these indicators will then be weighted in a spatial model and be used as a basis for generating site-specific MLN prediction maps that will guide policy on MLN management in Kenya. The broaderobjective is to document a model that can be up-scaled and replicated in other maize producing areas in Kenya affected by MLN.

Open-set speaker identification with diverse-duration speech data

NASA Astrophysics Data System (ADS)

Karadaghi, Rawande; Hertlein, Heinz; Ariyaeeinia, Aladdin

2015-05-01

The concern in this paper is an important category of applications of open-set speaker identification in criminal investigation, which involves operating with short and varied duration speech. The study presents investigations into the adverse effects of such an operating condition on the accuracy of open-set speaker identification, based on both GMMUBM and i-vector approaches. The experiments are conducted using a protocol developed for the identification task, based on the NIST speaker recognition evaluation corpus of 2008. In order to closely cover the real-world operating conditions in the considered application area, the study includes experiments with various combinations of training and testing data duration. The paper details the characteristics of the experimental investigations conducted and provides a thorough analysis of the results obtained.

Cause and cure of sloppiness in ordinary differential equation models.

PubMed

Tönsing, Christian; Timmer, Jens; Kreutz, Clemens

2014-08-01

Data-based mathematical modeling of biochemical reaction networks, e.g., by nonlinear ordinary differential equation (ODE) models, has been successfully applied. In this context, parameter estimation and uncertainty analysis is a major task in order to assess the quality of the description of the system by the model. Recently, a broadened eigenvalue spectrum of the Hessian matrix of the objective function covering orders of magnitudes was observed and has been termed as sloppiness. In this work, we investigate the origin of sloppiness from structures in the sensitivity matrix arising from the properties of the model topology and the experimental design. Furthermore, we present strategies using optimal experimental design methods in order to circumvent the sloppiness issue and present nonsloppy designs for a benchmark model.

NASA systems engineering handbook

NASA Astrophysics Data System (ADS)

Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; McDuffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

1995-06-01

This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive.

Cause and cure of sloppiness in ordinary differential equation models

NASA Astrophysics Data System (ADS)

Tönsing, Christian; Timmer, Jens; Kreutz, Clemens

2014-08-01

Data-based mathematical modeling of biochemical reaction networks, e.g., by nonlinear ordinary differential equation (ODE) models, has been successfully applied. In this context, parameter estimation and uncertainty analysis is a major task in order to assess the quality of the description of the system by the model. Recently, a broadened eigenvalue spectrum of the Hessian matrix of the objective function covering orders of magnitudes was observed and has been termed as sloppiness. In this work, we investigate the origin of sloppiness from structures in the sensitivity matrix arising from the properties of the model topology and the experimental design. Furthermore, we present strategies using optimal experimental design methods in order to circumvent the sloppiness issue and present nonsloppy designs for a benchmark model.

Social cognition and neurocognition as independent domains in psychosis.

PubMed

van Hooren, S; Versmissen, D; Janssen, I; Myin-Germeys, I; à Campo, J; Mengelers, R; van Os, J; Krabbendam, L

2008-08-01

Patients with psychosis display alterations in social cognition as well as in the realm of neurocognition. It is unclear, however, to what degree these cognitive domains represent two separate dimensions of liability or the pleiotropic expression of a single deficit. The purpose of the present study was to investigate (i) to what extent alterations in social cognition represent an independent area of vulnerability to psychosis, separate from neurocognitive deficits and (ii) whether social cognition is one construct or can be divided into several subcomponents. Five social cognition and three neurocognitive tasks were completed by 186 participants with different levels of vulnerability for psychosis: 44 patients with psychotic disorder; 47 subjects at familial risk; 41 subjects at psychometric risk and 54 control subjects. The social cognition tasks covered important basic subcomponents of social cognition, i.e. mentalisation (or theory of mind), data gathering bias (jumping to conclusions), source monitoring and attribution style. Neurocognitive tasks assessed speed of information processing, inhibition, cognitive shifting and strategy-driven retrieval from semantic memory. The results of factor analysis suggested that neurocognition and social cognition are two separate areas of vulnerability in psychosis. Furthermore, the social cognition measures lacked significant overlap, suggesting a multidimensional construct. Cognitive liabilities to psychosis are manifold, and include key processes underlying basic person-environment interactions in daily life, independent of cognition quantified by neuropsychological tests.

Phenotypic regional fMRI activation patterns during memory encoding in MCI and AD

PubMed Central

Browndyke, Jeffrey N.; Giovanello, Kelly; Petrella, Jeffrey; Hayden, Kathleen; Chiba-Falek, Ornit; Tucker, Karen A.; Burke, James R.; Welsh-Bohmer, Kathleen A.

2014-01-01

Background Reliable blood-oxygen-level-dependent (BOLD) fMRI phenotypic biomarkers of Alzheimer's disease (AD) or mild cognitive impairment (MCI) are likely to emerge only from a systematic, quantitative, and aggregate examination of the functional neuroimaging research literature. Methods A series of random-effects, activation likelihood estimation (ALE) meta-analyses were conducted on studies of episodic memory encoding operations in AD and MCI samples relative to normal controls. ALE analyses were based upon a thorough literature search for all task-based functional neuroimaging studies in AD and MCI published up to January 2010. Analyses covered 16 fMRI studies, which yielded 144 distinct foci for ALE meta-analysis. Results ALE results indicated several regional task-based BOLD consistencies in MCI and AD patients relative to normal controls across the aggregate BOLD functional neuroimaging research literature. Patients with AD and those at significant risk (MCI) showed statistically significant consistent activation differences during episodic memory encoding in the medial temporal lobe (MTL), specifically parahippocampal gyrus, as well superior frontal gyrus, precuneus, and cuneus, relative to normal controls. Conclusions ALE consistencies broadly support the presence of frontal compensatory activity, MTL activity alteration, and posterior midline “default mode” hyperactivation during episodic memory encoding attempts in the diseased or prospective pre-disease condition. Taken together these robust commonalities may form the foundation for a task-based fMRI phenotype of memory encoding in AD. PMID:22841497

Development of a shuttle recovery Commercial Materials Processing in Space (CMPS) program

NASA Technical Reports Server (NTRS)

1989-01-01

The work performed has covered the following tasks: update commercial users requirements; assess availability of carriers and facilities; shuttle availability assessment; development of optimum accommodations plan; and payload documentation requirements assessment. The results from the first four tasks are presented. To update commercial user requirements, contacts were made with the JEA and CCDS partners to obtain copies of their most recent official flight requests. From these requests the commercial partners' short and long range plans for flight dates, flight frequency, experiment hardware and carriers was determined. A 34 by 44 inch chart was completed to give a snapshot view of the progress of commercialization in space. Further, an assessment was made of the availability of carriers and facilities. Both existing carriers and those under development were identified for use by the commercial partners. A data base was compiled to show the capabilities of the carriers. A shuttle availability assessment was performed using the primary and secondary shuttle manifests released by NASA. Analysis of the manifest produced a flight-by-flight list of flight opportunities available to commercial users. Using inputs from the first three tasks, an Optimum Accommodations Plan was developed. The Accommodation Plan shows the commercial users manifested by flight, the experiment flown, the carrier used and complete list of commercial users that could not be manifested in each calendar year.

Distinguishing response conflict and task conflict in the Stroop task: evidence from ex-Gaussian distribution analysis.

PubMed

Steinhauser, Marco; Hübner, Ronald

2009-10-01

It has been suggested that performance in the Stroop task is influenced by response conflict as well as task conflict. The present study investigated the idea that both conflict types can be isolated by applying ex-Gaussian distribution analysis which decomposes response time into a Gaussian and an exponential component. Two experiments were conducted in which manual versions of a standard Stroop task (Experiment 1) and a separated Stroop task (Experiment 2) were performed under task-switching conditions. Effects of response congruency and stimulus bivalency were used to measure response conflict and task conflict, respectively. Ex-Gaussian analysis revealed that response conflict was mainly observed in the Gaussian component, whereas task conflict was stronger in the exponential component. Moreover, task conflict in the exponential component was selectively enhanced under task-switching conditions. The results suggest that ex-Gaussian analysis can be used as a tool to isolate different conflict types in the Stroop task. PsycINFO Database Record (c) 2009 APA, all rights reserved.

Single-trial EEG-informed fMRI analysis of emotional decision problems in hot executive function.

PubMed

Guo, Qian; Zhou, Tiantong; Li, Wenjie; Dong, Li; Wang, Suhong; Zou, Ling

2017-07-01

Executive function refers to conscious control in psychological process which relates to thinking and action. Emotional decision is a part of hot executive function and contains emotion and logic elements. As a kind of important social adaptation ability, more and more attention has been paid in recent years. Gambling task can be well performed in the study of emotional decision. As fMRI researches focused on gambling task show not completely consistent brain activation regions, this study adopted EEG-fMRI fusion technology to reveal brain neural activity related with feedback stimuli. In this study, an EEG-informed fMRI analysis was applied to process simultaneous EEG-fMRI data. First, relative power-spectrum analysis and K-means clustering method were performed separately to extract EEG-fMRI features. Then, Generalized linear models were structured using fMRI data and using different EEG features as regressors. The results showed that in the win versus loss stimuli, the activated regions almost covered the caudate, the ventral striatum (VS), the orbital frontal cortex (OFC), and the cingulate. Wide activation areas associated with reward and punishment were revealed by the EEG-fMRI integration analysis than the conventional fMRI results, such as the posterior cingulate and the OFC. The VS and the medial prefrontal cortex (mPFC) were found when EEG power features were performed as regressors of GLM compared with results entering the amplitudes of feedback-related negativity (FRN) as regressors. Furthermore, the brain region activation intensity was the strongest when theta-band power was used as a regressor compared with the other two fusion results. The EEG-based fMRI analysis can more accurately depict the whole-brain activation map and analyze emotional decision problems.

I-NERI Quarterly Technical Report (April 1 to June 30, 2005)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang Oh; Prof. Hee Cheon NO; Prof. John Lee

2005-06-01

The objective of this Korean/United States/laboratory/university collaboration is to develop new advanced computational methods for safety analysis codes for very-high-temperature gas-cooled reactors (VHTGRs) and numerical and experimental validation of these computer codes. This study consists of five tasks for FY-03: (1) development of computational methods for the VHTGR, (2) theoretical modification of aforementioned computer codes for molecular diffusion (RELAP5/ATHENA) and modeling CO and CO2 equilibrium (MELCOR), (3) development of a state-of-the-art methodology for VHTGR neutronic analysis and calculation of accurate power distributions and decay heat deposition rates, (4) reactor cavity cooling system experiment, and (5) graphite oxidation experiment. Second quartermore » of Year 3: (A) Prof. NO and Kim continued Task 1. As a further plant application of GAMMA code, we conducted two analyses: IAEA GT-MHR benchmark calculation for LPCC and air ingress analysis for PMR 600MWt. The GAMMA code shows comparable peak fuel temperature trend to those of other country codes. The analysis results for air ingress show much different trend from that of previous PBR analysis: later onset of natural circulation and less significant rise in graphite temperature. (B) Prof. Park continued Task 2. We have designed new separate effect test device having same heat transfer area and different diameter and total number of U-bands of air cooling pipe. New design has smaller pressure drop in the air cooling pipe than the previous one as designed with larger diameter and less number of U-bands. With the device, additional experiments have been performed to obtain temperature distributions of the water tank, the surface and the center of cooling pipe on axis. The results will be used to optimize the design of SNU-RCCS. (C) Prof. NO continued Task 3. The experimental work of air ingress is going on without any concern: With nuclear graphite IG-110, various kinetic parameters and reaction rates for the C/CO2 reaction were measured. Then, the rates of C/CO2 reaction were compared to the ones of C/O2 reaction. The rate equation for C/CO2 has been developed. (D) INL added models to RELAP5/ATHENA to cacilate the chemical reactions in a VHTR during an air ingress accident. Limited testing of the models indicate that they are calculating a correct special distribution in gas compositions. (E) INL benchmarked NACOK natural circulation data. (F) Professor Lee et al at the University of Michigan (UM) Task 5. The funding was received from the DOE Richland Office at the end of May and the subcontract paperwork was delivered to the UM on the sixth of June. The objective of this task is to develop a state of the art neutronics model for determining power distributions and decay heat deposition rates in a VHTGR core. Our effort during the reporting period covered reactor physics analysis of coated particles and coupled nuclear-thermal-hydraulic (TH) calculations, together with initial calculations for decay heat deposition rates in the core.« less

Linking Task Analysis with Student Learning.

ERIC Educational Resources Information Center

Sherman, Thomas M.; Wildman, Terry M.

An examination of task analysis from several perspectives in order to identify some of its purposes and advantages reveals that, as the interest in learning theory has shifted from a predominately behavioral perspective to a more cognitive orientation, the purpose of task analysis has also shifted. Formerly the purpose of task analysis was to aid…

Task Analysis of Shuttle Entry and Landing Activities

NASA Technical Reports Server (NTRS)

Holland, Albert W.; Vanderark, Stephen T.

1993-01-01

The Task Analysis of Shuttle Entry and Landing (E/L) Activities documents all tasks required to land the Orbiter following an STS mission. In addition to analysis of tasks performed, task conditions are described, including estimated time for completion, altitude, relative velocity, normal and lateral acceleration, location of controls operated or monitored, and level of g's experienced. This analysis precedes further investigations into potential effects of zero g on piloting capabilities for landing the Orbiter following long-duration missions. This includes, but is not limited to, researching the effects of extended duration missions on piloting capabilities. Four primary constraints of the analysis must be clarified: (1) the analysis depicts E/L in a static manner--the actual process is dynamic; (2) the task analysis was limited to a paper analysis, since it was not feasible to conduct research in the actual setting (i.e., observing or filming duration an actual E/L); (3) the tasks included are those required for E/L during nominal, daylight conditions; and (4) certain E/L tasks will vary according to the flying style of each commander.

Integrating Remote Sensing Data with Directional Two- Dimensional Wavelet Analysis and Open Geospatial Techniques for Efficient Disaster Monitoring and Management.

PubMed

Lin, Yun-Bin; Lin, Yu-Pin; Deng, Dong-Po; Chen, Kuan-Wei

2008-02-19

In Taiwan, earthquakes have long been recognized as a major cause oflandslides that are wide spread by floods brought by typhoons followed. Distinguishingbetween landslide spatial patterns in different disturbance regimes is fundamental fordisaster monitoring, management, and land-cover restoration. To circumscribe landslides,this study adopts the normalized difference vegetation index (NDVI), which can bedetermined by simply applying mathematical operations of near-infrared and visible-redspectral data immediately after remotely sensed data is acquired. In real-time disastermonitoring, the NDVI is more effective than using land-cover classifications generatedfrom remotely sensed data as land-cover classification tasks are extremely time consuming.Directional two-dimensional (2D) wavelet analysis has an advantage over traditionalspectrum analysis in that it determines localized variations along a specific direction whenidentifying dominant modes of change, and where those modes are located in multi-temporal remotely sensed images. Open geospatial techniques comprise a series ofsolutions developed based on Open Geospatial Consortium specifications that can beapplied to encode data for interoperability and develop an open geospatial service for sharing data. This study presents a novel approach and framework that uses directional 2Dwavelet analysis of real-time NDVI images to effectively identify landslide patterns andshare resulting patterns via open geospatial techniques. As a case study, this study analyzedNDVI images derived from SPOT HRV images before and after the ChiChi earthquake(7.3 on the Richter scale) that hit the Chenyulan basin in Taiwan, as well as images aftertwo large typhoons (Xangsane and Toraji) to delineate the spatial patterns of landslidescaused by major disturbances. Disturbed spatial patterns of landslides that followed theseevents were successfully delineated using 2D wavelet analysis, and results of patternrecognitions of landslides were distributed simultaneously to other agents using geographymarkup language. Real-time information allows successive platforms (agents) to work withlocal geospatial data for disaster management. Furthermore, the proposed is suitable fordetecting landslides in various regions on continental, regional, and local scales usingremotely sensed data in various resolutions derived from SPOT HRV, IKONOS, andQuickBird multispectral images.

Three Techniques for Task Analysis: Examples from the Nuclear Utilities.

ERIC Educational Resources Information Center

Carlisle, Kenneth E.

1984-01-01

Discusses three task analysis techniques utilized at the Palo Verde Nuclear Generating Station to review training programs: analysis of (1) job positions, (2) procedures, and (3) instructional presentations. All of these include task breakdown, relationship determination, and task restructuring. (MBR)

Student Task Analysis for the Development of E-Learning Lectural System in Basic Chemistry Courses in FKIP UMMY Solok

NASA Astrophysics Data System (ADS)

Afrahamiryano, A.; Ariani, D.

2018-04-01

The student task analysis is one part of the define stage in development research using the 4-D development model. Analysis of this task is useful to determine the level of understanding of students on lecture materials that have been given. The results of this task analysis serve as a measuring tool to determine the level of success of learning and as a basis in the development of lecture system. Analysis of this task is done by the method of observation and documentation study of the tasks undertaken by students. The results of this analysis are then described and after that triangulation are done to draw conclusions. The results of the analysis indicate that the students' level of understanding is high for theoretical and low material for counting material. Based on the results of this task analysis, it can be concluded that e-learning lecture system developed should be able to increase students' understanding on basic chemicals that are calculated.

The CARIPANDA project: Climate change and water resources in the Adamello Natural Park of Italy

NASA Astrophysics Data System (ADS)

Bocchiola, D.

2009-04-01

The three years (2007-2009) CARIPANDA project funded by the Cariplo Foundation of Italy is aimed to evaluate scenarios for water resources in the Adamello natural Park of Italy in a window of 50 years or so (until 2050). The project is led by Ente Parco Adamello and involves Politecnico di Milano, Università Statale di Milano, Università di Brescia, and ARPA Lombardia as scientific partners, while ENEL hydropower Company of Italy joins the project as stake holder. The Adamello Natural Park is a noteworthy resource in the Italian Alps. The Adamello Group is made of several glacierized areas (c. 24 km2), of both debris covered and free ice types, including the widest Italian Glacier, named Adamello, spreading on an area of about c. 18 km2. Also the Adamello Natural Reserve, covering 217 km2 inside the Adamello Park and including the Adamello glaciers, hosts a number of high altitude safeguarded vegetal and animal species, the safety of which is a primary task of the Reserve. Project's activity involves analysis of local climate trend, field campaigns on glaciers, hydrological modelling and remote sensing of snow and ice covered areas, aimed to build a consistent model of the present hydrological conditions and of the areas. Then, properly tailored climate change projections for the area, obtained using local data driven downscaling of climate change projections from GCMs model, are used to infer the likely response to expected climate change conditions. With two years in the project now some preliminary findings can be highlighted and some preliminary trend analysis carried out. The proposed poster provides a resume of the main results of the project insofar, of interest as a benchmark for similar ongoing and foregoing projects about climate change impact on European mountainous natural areas.

A resource for assessing information processing in the developing brain using EEG and eye tracking

PubMed Central

Langer, Nicolas; Ho, Erica J.; Alexander, Lindsay M.; Xu, Helen Y.; Jozanovic, Renee K.; Henin, Simon; Petroni, Agustin; Cohen, Samantha; Marcelle, Enitan T.; Parra, Lucas C.; Milham, Michael P.; Kelly, Simon P.

2017-01-01

We present a dataset combining electrophysiology and eye tracking intended as a resource for the investigation of information processing in the developing brain. The dataset includes high-density task-based and task-free EEG, eye tracking, and cognitive and behavioral data collected from 126 individuals (ages: 6–44). The task battery spans both the simple/complex and passive/active dimensions to cover a range of approaches prevalent in modern cognitive neuroscience. The active task paradigms facilitate principled deconstruction of core components of task performance in the developing brain, whereas the passive paradigms permit the examination of intrinsic functional network activity during varying amounts of external stimulation. Alongside these neurophysiological data, we include an abbreviated cognitive test battery and questionnaire-based measures of psychiatric functioning. We hope that this dataset will lead to the development of novel assays of neural processes fundamental to information processing, which can be used to index healthy brain development as well as detect pathologic processes. PMID:28398357

A resource for assessing information processing in the developing brain using EEG and eye tracking.

PubMed

Langer, Nicolas; Ho, Erica J; Alexander, Lindsay M; Xu, Helen Y; Jozanovic, Renee K; Henin, Simon; Petroni, Agustin; Cohen, Samantha; Marcelle, Enitan T; Parra, Lucas C; Milham, Michael P; Kelly, Simon P

2017-04-11

We present a dataset combining electrophysiology and eye tracking intended as a resource for the investigation of information processing in the developing brain. The dataset includes high-density task-based and task-free EEG, eye tracking, and cognitive and behavioral data collected from 126 individuals (ages: 6-44). The task battery spans both the simple/complex and passive/active dimensions to cover a range of approaches prevalent in modern cognitive neuroscience. The active task paradigms facilitate principled deconstruction of core components of task performance in the developing brain, whereas the passive paradigms permit the examination of intrinsic functional network activity during varying amounts of external stimulation. Alongside these neurophysiological data, we include an abbreviated cognitive test battery and questionnaire-based measures of psychiatric functioning. We hope that this dataset will lead to the development of novel assays of neural processes fundamental to information processing, which can be used to index healthy brain development as well as detect pathologic processes.

The effects of absence of stereopsis on performance of a simulated surgical task in two-dimensional and three-dimensional viewing conditions

PubMed Central

Bloch, Edward; Uddin, Nabil; Gannon, Laura; Rantell, Khadija; Jain, Saurabh

2015-01-01

Background Stereopsis is believed to be advantageous for surgical tasks that require precise hand-eye coordination. We investigated the effects of short-term and long-term absence of stereopsis on motor task performance in three-dimensional (3D) and two-dimensional (2D) viewing conditions. Methods 30 participants with normal stereopsis and 15 participants with absent stereopsis performed a simulated surgical task both in free space under direct vision (3D) and via a monitor (2D), with both eyes open and one eye covered in each condition. Results The stereo-normal group scored higher, on average, than the stereo-absent group with both eyes open under direct vision (p<0.001). Both groups performed comparably in monocular and binocular monitor viewing conditions (p=0.579). Conclusions High-grade stereopsis confers an advantage when performing a fine motor task under direct vision. However, stereopsis does not appear advantageous to task performance under 2D viewing conditions, such as in video-assisted surgery. PMID:25185439

Installation Restoration Program Environmental Technology Development. Biodegradation of DIMP, Dieldrin, Isodrin, DBCP, and PCPMSO in Rocky Mountain Arsenal Soils

DTIC Science & Technology

1989-01-30

D-007 & Hazardous Materials Agency 1 CETHA-TE Task No. 11 . ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS ATTN: CETHA-TE-D...PROGRAM IPROJECT TASK IWORK UNIT Aberdeen Proving Ground, MD 21010-5401 ELEMENT NO. NO. NO. ACCESSION NO. 1 . TITLE (Include SecurityClassification...Peter J. Marks 3a. TYPE OF REPORT 13b. TIME COVERED T14. DATE OF REPORT (Year, Month, Day) 115. PAGE COUNT Final FROM 1 /87 TO_1/89 11989 January 3 6

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOLID OXIDE FUEL CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2004-05-07

The objective of this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with the option of piped-in water (Demonstration System A). Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustion engine.more » This technical progress report covers work performed by Delphi from July 1, 2003 to December 31, 2003, under Department of Energy Cooperative Agreement DE-FC-02NT41246. This report highlights technical results of the work performed under the following tasks: Task 1 System Design and Integration; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant (BOP) Components; Task 5 Manufacturing Development (Privately Funded); Task 6 System Fabrication; Task 7 System Testing; Task 8 Program Management; Task 9 Stack Testing with Coal-Based Reformate; and Task 10 Technology Transfer from SECA CORE Technology Program. In this reporting period, unless otherwise noted Task 6--System Fabrication and Task 7--System Testing will be reported within Task 1 System Design and Integration. Task 8--Program Management, Task 9--Stack Testing with Coal Based Reformate, and Task 10--Technology Transfer from SECA CORE Technology Program will be reported on in the Executive Summary section of this report.« less

Improving patient care over weekends by reducing on-call work load and better time management.

PubMed

Gardezi, Syed Anjum Ali

2014-01-01

The Royal College of Physicians states that "handover, particularly of temporary 'on-call' responsibility, has been identified as a point at which errors are likely to occur."[1] Working a weekend on-call covering medical wards is often busy and stressful for all junior doctors. The high volume of routine and unplanned tasks make the situation even worse. In Nevill Hall hospital Abergavenny, we measured the workload on a junior doctor for medical ward cover on weekends by counting the number of times he/she was bleeped for routine tasks. Initial study demonstrated that on average 30-40% of time on a long day shift was spent on jobs which could have been done on the preceding Friday. The "FRIDAYS" checklist was introduced for clinical staff (particularly junior doctors) to identify these jobs. According to this model, all the junior doctors were encouraged to review: F: Phlebotomy R: Rewriting drug charts I: IV fluids D: discharge summaries A: Antibiotic review Y: Yellow book/Warfarin dose S: Status of resuscitation and escalation plans before leaving the wards on Friday afternoon. This implementation successfully showed reduction in weekend workload, allowing the ward cover to be focused on care and safety of comparatively sick patients while at the same time reducing the stress for the on-call team.

Monitoring the Deterioration of Stone at Mindener MUSEUM'S Lapidarium

NASA Astrophysics Data System (ADS)

Pomaska, G.

2013-07-01

Mindener Museum's Lapidarium incorporates a collection of stone work like reliefs, sculptures and inscriptions from different time epochs as advices of the city's history. These gems must be protected against environmental influences and deterioration. In advance of the measures a 3D reconstruction and detailed documentation has to be taken. The framework to establish hard- and software must match the museum's infrastructure. Two major question will be answered. Are low-cost scanning devices like depth cameras and digital of the shelf cameras suitable for the data acquisition? Does the functionality of open source and freeware covers the demand on investigation and analysis in this application? The working chain described in this contribution covers the structure from motion method and the reconstruction with RGB-D cameras. Mesh processing such as cleaning, smoothing, poisson surface reconstruction and texturing will be accomplished with MeshLab. Data acquisition and modelling continues in structure analysis. Therefore the focus lies as well on latest software developments related to 3D printing technologies. Repairing and finishing of meshes is a task for MeshMixer. Netfabb as a tool for positioning, dimensioning and slicing enables virtual handling of the items. On the Sketchfab web site one can publish and share 3D objects with integration into web pages supported by WebGL. Finally if a prototype is needed, the mesh can be uploaded to a 3D printing device provided by an online service.

Nonequilibrium radiation and chemistry models for aerocapture vehicle flowfields

NASA Technical Reports Server (NTRS)

Carlson, Leland A.

1993-01-01

The period from Jan. 1993 thru Aug. 1993 is covered. The primary tasks during this period were the development of a single and multi-vibrational temperature preferential vibration-dissociation coupling model, the development of a normal shock nonequilibrium radiation-gasdynamic coupling model based upon the blunt body model, and the comparison of results obtained with these models with experimental data. In addition, an extensive series of computations were conducted using the blunt body model to develop a set of reference results covering a wide range of vehicle sizes, altitudes, and entry velocities.

Optimized extreme learning machine for urban land cover classification using hyperspectral imagery

NASA Astrophysics Data System (ADS)

Su, Hongjun; Tian, Shufang; Cai, Yue; Sheng, Yehua; Chen, Chen; Najafian, Maryam

2017-12-01

This work presents a new urban land cover classification framework using the firefly algorithm (FA) optimized extreme learning machine (ELM). FA is adopted to optimize the regularization coefficient C and Gaussian kernel σ for kernel ELM. Additionally, effectiveness of spectral features derived from an FA-based band selection algorithm is studied for the proposed classification task. Three sets of hyperspectral databases were recorded using different sensors, namely HYDICE, HyMap, and AVIRIS. Our study shows that the proposed method outperforms traditional classification algorithms such as SVM and reduces computational cost significantly.

Vibration isolation technology: Sensitivity of selected classes of space experiments to residual accelerations

NASA Technical Reports Server (NTRS)

Alexander, J. Iwan D.; Zhang, Y. Q.; Adebiyi, Adebimpe

1989-01-01

Progress performed on each task is described. Order of magnitude analyses related to liquid zone sensitivity and thermo-capillary flow sensitivity are covered. Progress with numerical models of the sensitivity of isothermal liquid zones is described. Progress towards a numerical model of coupled buoyancy-driven and thermo-capillary convection experiments is also described. Interaction with NASA personnel is covered. Results to date are summarized and they are discussed in terms of the predicted space station acceleration environment. Work planned for the second year is also discussed.

A System Approach to Navy Medical Education and Training. Appendix 27. Competency Curriculum for Nuclear Medicine Technician.

DTIC Science & Technology

1974-08-31

AD)AOBS 703 TECHNOMICS INC OAKTON VA F.* A SYSTEM APPROACH TO NAVY MEDICAL EDUCATION AD TRAIMINS. APPD$-ftTC(U~ AUG 74 MOOI469-C-O34 UNCLASSIFIED N...ACCESSION NO. . RECIPIENT’S CATALOG NUMBERrnai epor t (Vols. I & 10 ._77 I. TI.T d.E .d /1trls TYPE OF REPORT A PEROD COVERED A System Approach to Navy... system of job analyses applicable to all system wide health care manpower tasks. A means of postulating simplified occupational clusters covering some

Information system for preserving culture heritage in areas affected by heavy industry and mining

NASA Astrophysics Data System (ADS)

Pacina, Jan; Kopecký, Jiří; Bedrníková, Lenka; Handrychová, Barbora; Švarcová, Martina; Holá, Markéta; Pončíková, Edita

2014-05-01

The natural development of the Ústí region (North-West Bohemia, the Czech Republic) has been affected by the human activity during the past hundred years. The heavy industrialization and the brown coal mining have completely changed the land-use in the region. The open-pit coal mines are completely destroying the surrounding landscape, including settlement, communications, hydrological network and the over-all natural development of the region. The other factor affecting the natural development of the landscape, land-use and settlement was the political situation in 1945 (end of the 2nd World War) when the borderland was depopulated. All these factors caused vanishing of more than two hundreds of colonies, villages and towns during this period of time. The task of this project is to prepare and offer for public use a comprehensive information system preserving the cultural heritage in the form of processed old maps, aerial imagery, land-use and georelief reconstructions, local studies, text and photo documents covering the extinct landscape and settlement. Wide range of various maps was used for this area - Müller's map of Bohemia (ca. 1720) followed by the 1st, 2nd and 3rd Military survey of Habsburg empire (1792, 1894, 1938), maps of Stabile cadaster (ca. 1840) and State map derived in the scale 1:5000 (1953, 1972, 1981). All the maps were processed, georeferenced, hand digitized and are further used as base layers for visualization and analysis. The historical aerial imagery was processed in standard ways of photogrammetry and is covering the year 1938, 1953 and the current state. The other important task covered by this project is the georelief reconstruction. We use the old maps and aerial imagery to reconstruct the complete time-line of the georelief development. This time-line is covering the period since 1938 until now. The derived digital terrain models and further on analyzed and printed on a 3D printer. Other reconstruction task are performed using the processed old maps - here we are studying the land-use change, settlement development and the industrialization and brown coal mining effect on the hydrological network structure. The processed data (old maps, aerial photographs, land-use and georelief reconstructions) are published as a web-mapping application built using the ArcGIS API for Flex technology. The application is offering visualization and overlay tools so the user can perform basic landscape and land-use development analyses. The resulting information system will consist of three parts - the web-mapping application, database containing the text and photo information about the vanished towns and villages (spatially linked to the web-mapping application) and other local studies performed on single sites in the region. The local studies are focused on application of data collection methods as UAV (Unmanned Aerial Vehicle), KAP (Kite Aerial Photography) and LIDAR.

A Workbench for Discovering Task-Specific Theories of Learning

DTIC Science & Technology

1989-03-03

mind (the cognitive architecture) will not be of much use to educators who wish to perform a cognitive task analysis of their subject matter before...analysis packages that can be added to a cognitive architecture, thus creating a ’workbench’ for performing cognitive task analysis . Such tools becomes...learning theories have been. Keywords: Cognitive task analysis , Instructional design, Cognitive modelling, Learning.

Naturalistic Decision Making: Implications for Design

DTIC Science & Technology

1993-04-01

Cognitive Task Analysis Decision Making Design Engineer Design System Human-Computer Interface System Development 15. NUMBER OF PAGES 182 16...people use to select a course of action. The SOAR explains how stress affects the decision making of both individuals and teams. COGNITIVE TASK ANALYSIS : This...procedures for Cognitive Task Analysis , contrasting the strengths and weaknesses of each, and showing how a Cognitive Task Analysis

Multiplexer/demultiplexer flexibility enhancement program

NASA Technical Reports Server (NTRS)

1978-01-01

This final report summarizes the accomplishments of the NASA/JSC MDM Flexibility Enhancement Program, Contract NAS9-15359 as carried out by Sperry Flight Systems from April through December 1977. Included are discussions of major statement of work tasks and the results, conclusions and recommended actions. All tasks called out in the amended SOW were carried out. Significant development tasks which were completed included the following: (1) Development, breadboard and test of a Pulse Output 28-volt Module. (2) Development and test of a 32-channel DC Analog Input (DCIN) Differential Module. (3) Development and test of a sequence memory module using an M2708 EPROM which can be programmed in the unit. (4) Development and test of a radiator top cover for a radiation-cooled Flexible MDM.

Supersonics--Airport Noise

NASA Technical Reports Server (NTRS)

Bridges, James

2007-01-01

At this, the first year-end meeting of the Fundamental Aeronautics Program, an overview of the Airport Noise discipline of the Supersonics Project leads the presentation of technical plans and achievements in this area of the Project. The overview starts by defining the Technical Challenges targeted by Airport Noise efforts, and the Approaches planned to meet these challenges. These are fleshed out in Elements, namely Prediction, Diagnostics, and Engineering, and broken down into Tasks. The Tasks level is where individual researchers' work is defined and from whence the technical presentations to follow this presentation come. This overview also presents the Milestones accomplished to date and to be completed in the next year. Finally, the NASA Research Announcement cooperative agreement activities are covered and tied to the Tasks and Milestones.

Cognitive rigidity in unipolar depression and obsessive compulsive disorder: examination of task switching, Stroop, working memory updating and post-conflict adaptation.

PubMed

Meiran, Nachshon; Diamond, Gary M; Toder, Doron; Nemets, Boris

2011-01-30

Obsessive compulsive disorder (OCD) and depressive rumination are both characterized by cognitive rigidity. We examined the performance of 17 patients (9 suffering from unipolar depression [UD] without OCD, and 8 suffering from OCD without UD), and 17 control participants matched on age, gender, language and education, on a battery covering the four main executive functions. Results indicated that, across both disorders, patients required more trials to adjust to single-task conditions after experiencing task switching, reflecting slow disengagement from switching mode, and showed abnormal post-conflict adaptation of processing mode following high conflict Stroop trials in comparison to controls. Rumination, which was elevated in UD and not in OCD, was associated with poor working memory updating and less task preparation. The results show that OCD and UD are associated with similar cognitive rigidity in the presently tested paradigms. Copyright © 2010 Elsevier Ltd. All rights reserved.

Cue Representation and Situational Awareness in Task Analysis

ERIC Educational Resources Information Center

Carl, Diana R.

2009-01-01

Task analysis in human performance technology is used to determine how human performance can be well supported with training, job aids, environmental changes, and other interventions. Early work by Miller (1953) and Gilbert (1969, 1974) addressed cue processing in task execution and recommended cue descriptions in task analysis. Modern task…

Skill Components of Task Analysis

ERIC Educational Resources Information Center

Adams, Anne E.; Rogers, Wendy A.; Fisk, Arthur D.

2013-01-01

Some task analysis methods break down a task into a hierarchy of subgoals. Although an important tool of many fields of study, learning to create such a hierarchy (redescription) is not trivial. To further the understanding of what makes task analysis a skill, the present research examined novices' problems with learning Hierarchical Task…

Basic Drafting. Revised.

ERIC Educational Resources Information Center

Schertz, Karen

This introductory module on drafting includes the technical content and tasks necessary for a student to be employed in an entry-level drafting occupation. The module contains 18 instructional units that cover the following topics: introduction to drafting; tools and equipment; supplies and materials; sketching; scales; drawing format; lettering;…

Carpentry. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains 17 modules for completing a course in carpentry. It is designed especially for use in secondary schools in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student…

Professional Development and TransLink[R]. Final Report.

ERIC Educational Resources Information Center

Kuhn, Beverly T.; Jasek, Deborah

This report covers one segment of a larger professional development program for transportation professionals that addresses the need to develop a larger cadre of transportation professionals capable of designing, planning, managing, operating, and maintaining the transportation infrastructure nationwide. Three specific tasks were undertaken and…

Masonry. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains nine modules for completing a course in masonry. It is designed especially for use in secondary schools in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student…

Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Precesses with Applications to Hybrid Rocket Motors. Part 1; Experimental Investigation

NASA Technical Reports Server (NTRS)

Kuo, Kenneth K.; Lu, Yeu-Cherng; Chiaverini, Martin J.; Johnson, David K.; Serin, Nadir; Risha, Grant A.; Merkle, Charles L.; Venkateswaran, Sankaran

1996-01-01

This final report summarizes the major findings on the subject of 'Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Processes with Applications to Hybrid Rocket Motors', performed from 1 April 1994 to 30 June 1996. Both experimental results from Task 1 and theoretical/numerical results from Task 2 are reported here in two parts. Part 1 covers the experimental work performed and describes the test facility setup, data reduction techniques employed, and results of the test firings, including effects of operating conditions and fuel additives on solid fuel regression rate and thermal profiles of the condensed phase. Part 2 concerns the theoretical/numerical work. It covers physical modeling of the combustion processes including gas/surface coupling, and radiation effect on regression rate. The numerical solution of the flowfield structure and condensed phase regression behavior are presented. Experimental data from the test firings were used for numerical model validation.

Medical Writing Competency Model - Section 1: Functions, Tasks, and Activities.

PubMed

Clemow, David B; Wagner, Bertil; Marshallsay, Christopher; Benau, Dan; L'Heureux, Darryl; Brown, David H; Dasgupta, Devjani Ghosh; Girten, Eileen; Hubbard, Frank; Gawrylewski, Helle-Mai; Ebina, Hiroko; Stoltenborg, Janet; York, J P; Green, Kim; Wood, Linda Fossati; Toth, Lisa; Mihm, Michael; Katz, Nancy R; Vasconcelos, Nina-Maria; Sakiyama, Norihisa; Whitsell, Robin; Gopalakrishnan, Shobha; Bairnsfather, Susan; Wanderer, Tatyana; Schindler, Thomas M; Mikyas, Yeshi; Aoyama, Yumiko

2018-01-01

This article provides Section 1 of the 2017 Edition 2 Medical Writing Competency Model that describes the core work functions and associated tasks and activities related to professional medical writing within the life sciences industry. The functions in the Model are scientific communication strategy; document preparation, development, and finalization; document project management; document template, standard, format, and style development and maintenance; outsourcing, alliance partner, and client management; knowledge, skill, ability, and behavior development and sharing; and process improvement. The full Model also includes Section 2, which covers the knowledge, skills, abilities, and behaviors needed for medical writers to be effective in their roles; Section 2 is presented in a companion article. Regulatory, publication, and other scientific writing as well as management of writing activities are covered. The Model was developed to aid medical writers and managers within the life sciences industry regarding medical writing hiring, training, expectation and goal setting, performance evaluation, career development, retention, and role value sharing to cross-functional partners.

Benthic habitat map of U.S. Coral Reef Task Force Faga‘alu Bay priority study area, Tutuila, American Samoa

USGS Publications Warehouse

Cochran, Susan A.; Gibbs, Ann E.; D'Antonio, Nicole L.; Storlazzi, Curt D.

2016-05-18

The coral reef in Faga‘alu Bay, Tutuila, American Samoa, has suffered numerous natural and anthropogenic stresses. Areas once dominated by live coral are now mostly rubble surfaces covered with turf or macroalgae. In an effort to improve the health and resilience of the coral reef system, the U.S. Coral Reef Task Force selected Faga‘alu Bay as a priority study area. To support these efforts, the U.S. Geological Survey mapped nearly 1 km2 of seafloor to depths of about 60 m. Unconsolidated sediment (predominantly sand) constitutes slightly greater than 50 percent of the seafloor in the mapped area; reef and other hardbottom potentially available for coral recruitment constitute nearly 50 percent of the mapped area. Of this potentially available hardbottom, only slightly greater than 37 percent is covered with at least 10 percent coral, which is fairly evenly distributed between the reef flat, fore reef, and offshore bank/shelf. 

Wide coverage biomedical event extraction using multiple partially overlapping corpora

PubMed Central

2013-01-01

Background Biomedical events are key to understanding physiological processes and disease, and wide coverage extraction is required for comprehensive automatic analysis of statements describing biomedical systems in the literature. In turn, the training and evaluation of extraction methods requires manually annotated corpora. However, as manual annotation is time-consuming and expensive, any single event-annotated corpus can only cover a limited number of semantic types. Although combined use of several such corpora could potentially allow an extraction system to achieve broad semantic coverage, there has been little research into learning from multiple corpora with partially overlapping semantic annotation scopes. Results We propose a method for learning from multiple corpora with partial semantic annotation overlap, and implement this method to improve our existing event extraction system, EventMine. An evaluation using seven event annotated corpora, including 65 event types in total, shows that learning from overlapping corpora can produce a single, corpus-independent, wide coverage extraction system that outperforms systems trained on single corpora and exceeds previously reported results on two established event extraction tasks from the BioNLP Shared Task 2011. Conclusions The proposed method allows the training of a wide-coverage, state-of-the-art event extraction system from multiple corpora with partial semantic annotation overlap. The resulting single model makes broad-coverage extraction straightforward in practice by removing the need to either select a subset of compatible corpora or semantic types, or to merge results from several models trained on different individual corpora. Multi-corpus learning also allows annotation efforts to focus on covering additional semantic types, rather than aiming for exhaustive coverage in any single annotation effort, or extending the coverage of semantic types annotated in existing corpora. PMID:23731785

Cellular Automata

NASA Astrophysics Data System (ADS)

Gutowitz, Howard

1991-08-01

Cellular automata, dynamic systems in which space and time are discrete, are yielding interesting applications in both the physical and natural sciences. The thirty four contributions in this book cover many aspects of contemporary studies on cellular automata and include reviews, research reports, and guides to recent literature and available software. Chapters cover mathematical analysis, the structure of the space of cellular automata, learning rules with specified properties: cellular automata in biology, physics, chemistry, and computation theory; and generalizations of cellular automata in neural nets, Boolean nets, and coupled map lattices. Current work on cellular automata may be viewed as revolving around two central and closely related problems: the forward problem and the inverse problem. The forward problem concerns the description of properties of given cellular automata. Properties considered include reversibility, invariants, criticality, fractal dimension, and computational power. The role of cellular automata in computation theory is seen as a particularly exciting venue for exploring parallel computers as theoretical and practical tools in mathematical physics. The inverse problem, an area of study gaining prominence particularly in the natural sciences, involves designing rules that possess specified properties or perform specified task. A long-term goal is to develop a set of techniques that can find a rule or set of rules that can reproduce quantitative observations of a physical system. Studies of the inverse problem take up the organization and structure of the set of automata, in particular the parameterization of the space of cellular automata. Optimization and learning techniques, like the genetic algorithm and adaptive stochastic cellular automata are applied to find cellular automaton rules that model such physical phenomena as crystal growth or perform such adaptive-learning tasks as balancing an inverted pole. Howard Gutowitz is Collaborateur in the Service de Physique du Solide et Résonance Magnetique, Commissariat a I'Energie Atomique, Saclay, France.

Beam shaping for laser initiated optical primers

NASA Astrophysics Data System (ADS)

Lizotte, Todd E.

2008-08-01

Remington was one of the first firearm manufacturing companies to file a patent for laser initiated firearms, in 1969. Nearly 40 years later, the development of laser initiated firearms has not become a mainstream technology in the civilian market. Requiring a battery is definitely a short coming, so it is easy to see how such a concept would be problematic. Having a firearm operate reliably and the delivery of laser energy in an efficient manner to ignite the shock-sensitive explosive primer mixtures is a tall task indeed. There has been considerable research on optical element based methods of transferring or compressing laser energy to ignite primer charges, including windows, laser chip primers and various lens shaped windows to focus the laser energy. The focusing of laser light needs to achieve igniting temperatures upwards of >400°C. Many of the patent filings covering this type of technology discuss simple approaches where a single point of light might be sufficient to perform this task. Alternatively a multi-point method might provide better performance, especially for mission critical applications, such as precision military firearms. This paper covers initial design and performance test of the laser beam shaping optics to create simultaneous multiple point ignition locations and a circumferential intense ring for igniting primer charge compounds. A simple initial test of the ring beam shaping technique was evaluated on a standard large caliber primer to determine its effectiveness on igniting the primer material. Several tests were conducted to gauge the feasibility of laser beam shaping, including optic fabrication and mounting on a cartridge, optic durability and functional ignition performance. Initial data will be presented, including testing of optically elements and empirical primer ignition / burn analysis.

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2003-06-09

The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with piped-in water (Demonstration System A); and Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustionmore » engine. This technical progress report covers work performed by Delphi from July through December 2002 under Department of Energy Cooperative Agreement DE-FC-02NT41246 for the 5 kW mass-market automotive (gasoline) auxiliary power unit. This report highlights technical results of the work performed under the following tasks for the automotive 5 kW system: Task 1--System Design and Integration; Task 2--Solid Oxide Fuel Cell Stack Developments; Task 3--Reformer Developments; Task 4--Development of Balance of Plant (BOP) Components; Task 5--Manufacturing Development (Privately Funded); Task 6--System Fabrication; and Task 7--System Testing.« less

Professional or administrative value patterns? Clinical pathways in medical problem-solving processes.

PubMed

Holmberg, Leif

2007-11-01

A health-care organization simultaneously belongs to two different institutional value patterns: a professional and an administrative value pattern. At the administrative level, medical problem-solving processes are generally perceived as the efficient application of familiar chains of activities to well-defined problems; and a low task uncertainty is therefore assumed at the work-floor level. This assumption is further reinforced through clinical pathways and other administrative guidelines. However, studies have shown that in clinical practice such administrative guidelines are often considered inadequate and difficult to implement mainly because physicians generally perceive task uncertainty to be high and that the guidelines do not cover the scope of encountered deviations. The current administrative level guidelines impose uniform structural features that meet the requirement for low task uncertainty. Within these structural constraints, physicians must organize medical problem-solving processes to meet any task uncertainty that may be encountered. Medical problem-solving processes with low task uncertainty need to be organized independently of processes with high task uncertainty. Each process must be evaluated according to different performance standards and needs to have autonomous administrative guideline models. Although clinical pathways seem appropriate when there is low task uncertainty, other kinds of guidelines are required when the task uncertainty is high.

The Validity of Functional Near-Infrared Spectroscopy Recordings of Visuospatial Working Memory Processes in Humans.

PubMed

Witmer, Joëlle S; Aeschlimann, Eva A; Metz, Andreas J; Troche, Stefan J; Rammsayer, Thomas H

2018-04-05

Functional near infrared spectroscopy (fNIRS) is increasingly used for investigating cognitive processes. To provide converging evidence for the validity of fNIRS recordings in cognitive neuroscience, we investigated functional activation in the frontal cortex in 43 participants during the processing of a visuospatial working memory (WM) task and a sensory duration discrimination (DD) task functionally unrelated to WM. To distinguish WM-related processes from a general effect of increased task demand, we applied an adaptive approach, which ensured that subjective task demand was virtually identical for all individuals and across both tasks. Our specified region of interest covered Brodmann Area 8 of the left hemisphere, known for its important role in the execution of WM processes. Functional activation, as indicated by an increase of oxygenated and a decrease of deoxygenated hemoglobin, was shown for the WM task, but not in the DD task. The overall pattern of results indicated that hemodynamic responses recorded by fNIRS are sensitive to specific visuospatial WM capacity-related processes and do not reflect a general effect of increased task demand. In addition, the finding that no such functional activation could be shown for participants with far above-average mental ability suggested different cognitive processes adopted by this latter group.

The Validity of Functional Near-Infrared Spectroscopy Recordings of Visuospatial Working Memory Processes in Humans

PubMed Central

Witmer, Joëlle S.; Aeschlimann, Eva A.; Metz, Andreas J.; Rammsayer, Thomas H.

2018-01-01

Functional near infrared spectroscopy (fNIRS) is increasingly used for investigating cognitive processes. To provide converging evidence for the validity of fNIRS recordings in cognitive neuroscience, we investigated functional activation in the frontal cortex in 43 participants during the processing of a visuospatial working memory (WM) task and a sensory duration discrimination (DD) task functionally unrelated to WM. To distinguish WM-related processes from a general effect of increased task demand, we applied an adaptive approach, which ensured that subjective task demand was virtually identical for all individuals and across both tasks. Our specified region of interest covered Brodmann Area 8 of the left hemisphere, known for its important role in the execution of WM processes. Functional activation, as indicated by an increase of oxygenated and a decrease of deoxygenated hemoglobin, was shown for the WM task, but not in the DD task. The overall pattern of results indicated that hemodynamic responses recorded by fNIRS are sensitive to specific visuospatial WM capacity-related processes and do not reflect a general effect of increased task demand. In addition, the finding that no such functional activation could be shown for participants with far above-average mental ability suggested different cognitive processes adopted by this latter group. PMID:29621179

Task Analysis Assessment on Intrastate Bus Traffic Controllers

NASA Astrophysics Data System (ADS)

Yen Bin, Teo; Azlis-Sani, Jalil; Nur Annuar Mohd Yunos, Muhammad; Ismail, S. M. Sabri S. M.; Tajedi, Noor Aqilah Ahmad

2016-11-01

Public transportation acts as social mobility and caters the daily needs of the society for passengers to travel from one place to another. This is true for a country like Malaysia where international trade has been growing significantly over the past few decades. Task analysis assessment was conducted with the consideration of cognitive ergonomic view towards problem related to human factors. Conducting research regarding the task analysis on bus traffic controllers had allowed a better understanding regarding the nature of work and the overall monitoring activities of the bus services. This paper served to study the task analysis assessment on intrastate bus traffic controllers and the objectives of this study include to conduct task analysis assessment on the bus traffic controllers. Task analysis assessment for the bus traffic controllers was developed via Hierarchical Task Analysis (HTA). There are a total of five subsidiary tasks on level one and only two were able to be further broken down in level two. Development of HTA allowed a better understanding regarding the work and this could further ease the evaluation of the tasks conducted by the bus traffic controllers. Thus, human error could be reduced for the safety of all passengers and increase the overall efficiency of the system. Besides, it could assist in improving the operation of the bus traffic controllers by modelling or synthesizing the existing tasks if necessary.

Comparison and harmonization of measuring methods for air contaminants in the working environment.

PubMed

Leichnitz, K

1998-09-01

The objective of this work was to demonstrate that the measurement of air contaminants in the workplace requires a special approach. Decisive in carrying out the measuring task is the quality of the sampling strategy, including selection of the appropriate measuring method. Methods developed at a national level may be more suitable for this purpose than methods described in international standards. Measurements of air contaminants in the workplace should always be the basis for the prevention and control of occupational hazards. Such measurements, therefore, are also an essential element of risk assessment. Industrial processes and chemical agents are myriad. Each manufacturing stage may apply different conditions (e.g., batch production or continuous process, temperature, pressure) and agents (e.g. a wide variety of chemical substances): In each of these stages, different job functions may be necessary and may be subject to different exposure conditions. Distance from emission sources and physical parameters, such as rates of release, air current, meteorological variations, also have a profound influence. The measuring task in the workplace is quite different in comparison to many others (e.g., blood or soil sample analysis). Firstly, the selection of sampling time and sampling location are crucial steps in air analysis. Transportation and storage of the samples, may however, also influence measuring results; interlaboratory tests show the existing problems. Generally, in analytics, the substance to be determined remains "well covered" in its matrix during sampling, transportation and storage. In air analysis, however, the contaminant is usually "torn" from its surrounding matrix (the air) and "forced" into the sorbent, where it finds a completely new environment; reactions yielding artefacts may take place. Several international organizations have issued guidelines and standards on measuring methods for air contaminants in the working environment, such as the World Health Organization (WHO), the International Union of Pure and Applied Chemistry (IUPAC), and the International Organization for Standardization (ISO). Most of these international documents are substance-related and mainly cover the analytical steps, which constitute only part of the whole measuring process. The approach of the Commission of the European Union is useful in solving the task of air testing in the workplace. This body has issued an EU Directive which includes general requirements for measuring methods. In the Directive it is also stated that persons who carry out measurements must possess the necessary expertise. The Directive, in addition, refers to the European Committee for Standardization (CEN), and that to general requirements for measuring procedures. The advantage of the EU/CEN approach is its aspect of general requirements. This allows the development of new or improved methods without any restricting effect on existing substance-related standards.

Applied Cognitive Task Analysis (ACTA) Methodology

DTIC Science & Technology

1997-11-01

experienced based cognitive skills. The primary goal of this project was to develop streamlined methods of Cognitive Task Analysis that would fill this need...We have made important progression this direction. We have developed streamlined methods of Cognitive Task Analysis . Our evaluation study indicates...developed a CD-based stand alone instructional package, which will make the Applied Cognitive Task Analysis (ACTA) tools widely accessible. A survey of the

Exemplar Training for Battalion Visualization (CD-ROM)

DTIC Science & Technology

cognitive task analysis to identify important visualization skill at a battalion level of command. The cognitive task analysis consisted of a review of...findings from the cognitive task analysis , 11 skill areas were identified as potential focal points of future training development. The findings from the... cognitive task analysis were used to design and develop exemplar training exercises for two skill areas; identify key problem elements employing the

Task Analysis Strategies and Practices. Practice Application Brief.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Worker-oriented, job-oriented, and cognitive task analyses have all been used as tools for closing the gap between what curriculum teaches and what workers do. Although they share a commonality of purpose, the focus, cost, and practicality of task analysis techniques vary. Worker-oriented task analysis focuses on general human behaviors required…

Identification of Child Pedestrian Training Objectives: The Role of Task Analysis and Empirical Research.

ERIC Educational Resources Information Center

van der Molen, Hugo H.

1984-01-01

Describes a study designed to demonstrate that child pedestrian training objectives may be identified systematically through various task analysis methods, making use of different types of empirical information. Early approaches to analysis of pedestrian tasks are reviewed, and an outline of the Traffic Research Centre's pedestrian task analysis…

A Standard Procedure for Conducting Cognitive Task Analysis.

ERIC Educational Resources Information Center

Redding, Richard E.

Traditional methods for task analysis have been largely based on the Instructional Systems Development (ISD) model, which is widely used throughout industry and the military. The first part of this document gives an overview of cognitive task analysis, which is conducted within the first phase of ISD. The following steps of cognitive task analysis…

Tool and Task Analysis Guide for Vocational Welding (150 Tasks). Performance Based Vocational Education.

ERIC Educational Resources Information Center

John H. Hinds Area Vocational School, Elwood, IN.

This book contains a task inventory, a task analysis of 150 tasks from that inventory, and a tool list for performance-based welding courses in the state of Indiana. The task inventory and tool list reflect 28 job titles found in Indiana. In the first part of the guide, tasks are listed by these domains: carbon-arc, electron beam, G.M.A.W., gas…

Scheduling techniques in the Request Oriented Scheduling Engine (ROSE)

NASA Technical Reports Server (NTRS)

Zoch, David R.

1991-01-01

Scheduling techniques in the ROSE are presented in the form of the viewgraphs. The following subject areas are covered: agenda; ROSE summary and history; NCC-ROSE task goals; accomplishments; ROSE timeline manager; scheduling concerns; current and ROSE approaches; initial scheduling; BFSSE overview and example; and summary.

Handbook of Occupational Programs. Task Linkage Project Publication No. 1.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. School of Education.

To demonstrate the continuity between secondary and postsecondary occupational programs and the link between them and industrial manpower roles, this handbook cross references Georgia occupational educational programs and related job titles. Nineteen occupational clusters included in secondary schools are covered: agricultural power and mechanics;…

78 FR 48765 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... safety appliance arrangements on modern railcar types not explicitly covered by 49 CFR Part 231. The Task... all car types, plus industry safety appliance standards for specific car types. These industry... arrangements for individual car types. AAR also included deviation tables that show where the AAR standard...

Towards a Methodology for the Design of Multimedia Public Access Interfaces.

ERIC Educational Resources Information Center

Rowley, Jennifer

1998-01-01

Discussion of information systems methodologies that can contribute to interface design for public access systems covers: the systems life cycle; advantages of adopting information systems methodologies; soft systems methodologies; task-oriented approaches to user interface design; holistic design, the Star model, and prototyping; the…

Welding. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains 30 modules for completing a course in welding. It is designed especially for use in secondary schools in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student self-check…

Assessment of Children with Attention Problems.

ERIC Educational Resources Information Center

Bacon, Ellen H.

The category of attention deficit disorder is defined in terms of diagnostic symptoms (inattention, impulsivity, and hyperactivity) and definitions. Aspects which need to be covered in the classroom evaluation of a child with suspected attention deficit disorder are reviewed, including examination of the task for its appropriateness; determination…

Cluster: Carpentry. Course: Carpentry. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The course on carpentry is divided into 14 sequential units, with several task packages within each, covering the following topics: carpentry hand tools; portable power tools; working machine tools; lumber; fasteners and adhesives; plans, specifications, and codes for houses; footings and foundations for a house; household cabinets; floor framing…

The Importance of Context in Development and Application of Ecosystem Services Production Functions

EPA Science Inventory

The task of estimating ecosystem service production and delivery deserves special attention. When approached as a function of land cover at any given time, context driven facets of ecosystem service production, delivery, and resulting effects on human well-being can be overlooke...

Arizona Industrial Arts Manufacturing Technology. Teacher's Curriculum Guide.

ERIC Educational Resources Information Center

Miller, Milton; And Others

This curriculum guide is intended to assist junior and senior high school vocational instructors in presenting a course in manufacturing technology. The package contains a competency/skill and task list, an instructor's guide, and a bibliography. The following competencies are covered: the historical development of manufacturing (the…

STRATEGIES FOR INSTRUCTIONAL CHANGE--PROMISING IDEAS AND PERPLEXING PROBLEMS.

ERIC Educational Resources Information Center

HARRIS, BEN M.

SUPERVISION, BECAUSE IT COVERS A MULTIPLICITY OF TASKS PERFORMED IN NO FIXED LOCUS, ITS ALMOST IMMUNE TO SYSTEMATIC EVALUATION. ELABORATE DESCRIPTIVE STUDIES ARE NEEDED (POSSIBLY REPLICATIONS OF EDUCATIONAL ADMINISTRATION STUDIES) ON SUCH TOPICS AS RESISTANCE TO CHANGE AND SUPERVISOR-SUPERVISOR RELATIONSHIPS. THEORETICAL MODELS AND CONCEPTS WHICH…

NASA Systems Engineering Handbook

NASA Technical Reports Server (NTRS)

Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; Mcduffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

1995-01-01

This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive. Superseded by: NASA/SP-2007-6105 Rev 1 (20080008301).

Mars Science Laboratory CHIMRA/IC/DRT Flight Software for Sample Acquisition and Processing

NASA Technical Reports Server (NTRS)

Kim, Won S.; Leger, Chris; Carsten, Joseph; Helmick, Daniel; Kuhn, Stephen; Redick, Richard; Trujillo, Diana

2013-01-01

The design methodologies of using sequence diagrams, multi-process functional flow diagrams, and hierarchical state machines were successfully applied in designing three MSL (Mars Science Laboratory) flight software modules responsible for handling actuator motions of the CHIMRA (Collection and Handling for In Situ Martian Rock Analysis), IC (Inlet Covers), and DRT (Dust Removal Tool) mechanisms. The methodologies were essential to specify complex interactions with other modules, support concurrent foreground and background motions, and handle various fault protections. Studying task scenarios with multi-process functional flow diagrams yielded great insight to overall design perspectives. Since the three modules require three different levels of background motion support, the methodologies presented in this paper provide an excellent comparison. All three modules are fully operational in flight.

Assessing, understanding, and conveying the state of the Arctic sea ice cover

NASA Astrophysics Data System (ADS)

Perovich, D. K.; Richter-Menge, J. A.; Rigor, I.; Parkinson, C. L.; Weatherly, J. W.; Nghiem, S. V.; Proshutinsky, A.; Overland, J. E.

2003-12-01

Recent studies indicate that the Arctic sea ice cover is undergoing significant climate-induced changes, affecting both its extent and thickness. Satellite-derived estimates of Arctic sea ice extent suggest a reduction of about 3% per decade since 1978. Ice thickness data from submarines suggest a net thinning of the sea ice cover since 1958. Changes (including oscillatory changes) in atmospheric circulation and the thermohaline properties of the upper ocean have also been observed. These changes impact not only the Arctic, but the global climate system and are likely accelerated by such processes as the ice-albedo feedback. It is important to continue and expand long-term observations of these changes to (a) improve the fundamental understanding of the role of the sea ice cover in the global climate system and (b) use the changes in the sea ice cover as an early indicator of climate change. This is a formidable task that spans a range of temporal and spatial scales. Fortunately, there are numerous tools that can be brought to bear on this task, including satellite remote sensing, autonomous buoys, ocean moorings, field campaigns and numerical models. We suggest the integrated and coordinated use of these tools during the International Polar Year to monitor the state of the Arctic sea ice cover and investigate its governing processes. For example, satellite remote sensing provides the large-scale snapshots of such basic parameters as ice distribution, melt zone, and cloud fraction at intervals of half a day to a week. Buoys and moorings can contribute high temporal resolution and can measure parameters currently unavailable from space including ice thickness, internal ice temperature, and ocean temperature and salinity. Field campaigns can be used to explore, in detail, the processes that govern the ice cover. Numerical models can be used to assess the character of the changes in the ice cover and predict their impacts on the rest of the climate system. This work affords extraordinary opportunities for outreach activities, because of the public interest in both the Arctic and climate change. Data can be streamed to public web sites in near real time, as can photographs and commentaries from field camps. The breadth of activities affords considerable opportunities to engage the next generation of researchers in such diverse fields as computer science, engineering, and geophysics.

Use of cognitive artifacts in chemistry learning

NASA Astrophysics Data System (ADS)

Yengin, Ilker

In everyday life, we interact with cognitive artifacts to receive and/or manipulate information so as to alter our thinking processes. CHEM/TEAC 869Q is a distance course that includes extensive explicit instruction in the use of a cognitive artifact. This study investigates issues related to the design of that online artifact. In order to understand design implications and how cognitive artifacts contribute to students' thinking and learning, a qualitative research methodology was engaged that utilized think aloud sessions. Participants' described constrained and structured cognitive models while using the artifact. The study also was informed by interviews and researcher's field notes. A purposeful sampling method led to the selection of participants, four males and two females, who had no prior history of using a course from the 869 series but who had experienced the scientific content covered by the CHEM869Q course. Analysis of the results showed both that a cognitive artifact may lead users' minds in decision making, and that problem solving processes were affected by cognitive artifact's design. When there is no design flaw, users generally thought that the cognitive artifact was helpful by simplifying steps, overcoming other limitations, and reducing errors in a reliable, effective, and easy to use way. Moreover, results showed that successful implementation of cognitive artifacts into teaching --learning practices depended on user willingness to transfer a task to the artifact. While users may like the idea of benefiting from a cognitive artifact, nevertheless, they may tend to limit their usage. They sometimes think that delegating a task to a cognitive artifact makes them dependent, and that they may not learn how to perform the tasks by themselves. They appear more willing to use a cognitive artifact after they have done the task by themselves.

Basic Information Processing Abilities at 11 years Account for Deficits in IQ Associated with Preterm Birth.

PubMed

Rose, Susan A; Feldman, Judith F; Jankowski, Jeffery J; Van Rossem, Ronan

2011-07-01

Although it is well established that preterms as a group do poorly relative to their full-term peers on tests of global cognitive functioning, the basis for this relative deficiency is less understood. The present paper examines preterm deficits in core cognitive abilities and determines their role in mediating preterm/full-term differences in IQ. The performance of 11-year-old children born preterm (birth weight <1750g) and their full-term controls were compared on a large battery of 15 tasks, covering four basic cognitive domains -- memory, attention, speed of processing and representational competence. The validity of these four domains was established using latent variables and confirmatory factor analysis (CFA). Preterms showed pervasive deficits within and across domains. Additionally, preterm deficits in IQ were completely mediated by these four cognitive domains in a structural equation model involving a cascade from elementary abilities (attention and speed), to more complex abilities (memory and representational competence), to IQ. The similarity of findings to those obtained with this cohort in infancy and toddlerhood suggest that preterm deficits persist - across time, across task, and from the non-verbal to the verbal period.

ZK DrugResist 2.0: A TextMiner to extract semantic relations of drug resistance from PubMed.

PubMed

Khalid, Zoya; Sezerman, Osman Ugur

2017-05-01

Extracting useful knowledge from an unstructured textual data is a challenging task for biologists, since biomedical literature is growing exponentially on a daily basis. Building an automated method for such tasks is gaining much attention of researchers. ZK DrugResist is an online tool that automatically extracts mutations and expression changes associated with drug resistance from PubMed. In this study we have extended our tool to include semantic relations extracted from biomedical text covering drug resistance and established a server including both of these features. Our system was tested for three relations, Resistance (R), Intermediate (I) and Susceptible (S) by applying hybrid feature set. From the last few decades the focus has changed to hybrid approaches as it provides better results. In our case this approach combines rule-based methods with machine learning techniques. The results showed 97.67% accuracy with 96% precision, recall and F-measure. The results have outperformed the previously existing relation extraction systems thus can facilitate computational analysis of drug resistance against complex diseases and further can be implemented on other areas of biomedicine. Copyright © 2017 Elsevier Inc. All rights reserved.

Ergonomic evaluation of a wheelchair transportation securement system.

PubMed

Ahmed, Madiha; Campbell-Kyureghyan, Naira; Frost, Karen; Bertocci, Gina

2012-01-01

The Americans with Disabilities Act (ADA) specifies guidelines covering the securement system and environment for wheeled mobility device (WhMD) passengers on the public bus system in the United States, referred to as the wheelchair tiedown and occupant restraint system (WTORS). The misuse or disuse of the WTORS system can be a source of injury for WhMD passengers riding the buses. The purpose of this study was to quantify the risks posed to the bus driver while performing the WTORS procedure using traditional ergonomic analysis methods. Four bus drivers completed the WTORS procedure for a representative passenger seated in three different WhMDs: manual wheelchair (MWC), scooter (SCTR), and power wheelchair (PWC). Potential work-related risks were identified using the four most applicable ergonomic assessment tools: PLIBEL, RULA, REBA, and iLMM. Task evaluation results revealed high levels of risk to be present to drivers during the WTORS procedure. The securement station space design and equipment layout were identified as contributing factors forcing drivers to adopt awkward postures while performing the WTORS task. These risk factors are known contributors to injury and the drivers could opt to improperly secure the passengers to avoid that risk.

Basic Information Processing Abilities at 11 years Account for Deficits in IQ Associated with Preterm Birth

PubMed Central

Rose, Susan A.; Feldman, Judith F.; Jankowski, Jeffery J.; Van Rossem, Ronan

2011-01-01

Although it is well established that preterms as a group do poorly relative to their full-term peers on tests of global cognitive functioning, the basis for this relative deficiency is less understood. The present paper examines preterm deficits in core cognitive abilities and determines their role in mediating preterm/full-term differences in IQ. The performance of 11-year-old children born preterm (birth weight <1750g) and their full-term controls were compared on a large battery of 15 tasks, covering four basic cognitive domains -- memory, attention, speed of processing and representational competence. The validity of these four domains was established using latent variables and confirmatory factor analysis (CFA). Preterms showed pervasive deficits within and across domains. Additionally, preterm deficits in IQ were completely mediated by these four cognitive domains in a structural equation model involving a cascade from elementary abilities (attention and speed), to more complex abilities (memory and representational competence), to IQ. The similarity of findings to those obtained with this cohort in infancy and toddlerhood suggest that preterm deficits persist – across time, across task, and from the non-verbal to the verbal period. PMID:21643482

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Professional Nurse (Associate Degree). Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This document contains a task analysis for health occupations (professional nurse) in the nursing cluster. For each task listed, occupation, duty area, performance standard, steps, knowledge, attitudes, safety, equipment/supplies, source of analysis, and Illinois state goals for learning are listed. For the duty area of "providing therapeutic…

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Home Health Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This document contains a task analysis for health occupations (home health aid) in the nursing cluster. For each task listed, occupation, duty area, performance standard, steps, knowledge, attitudes, safety, equipment/supplies, source of analysis, and Illinois state goals for learning are listed. For the duty area of "providing therapeutic…

Jet Noise Modeling for Suppressed and Unsuppressed Aircraft in Simulated Flight

NASA Technical Reports Server (NTRS)

Stone, James R.; Krejsa, Eugene A.; Clark, Bruce J; Berton, Jeffrey J.

2009-01-01

This document describes the development of further extensions and improvements to the jet noise model developed by Modern Technologies Corporation (MTC) for the National Aeronautics and Space Administration (NASA). The noise component extraction and correlation approach, first used successfully by MTC in developing a noise prediction model for two-dimensional mixer ejector (2DME) nozzles under the High Speed Research (HSR) Program, has been applied to dual-stream nozzles, then extended and improved in earlier tasks under this contract. Under Task 6, the coannular jet noise model was formulated and calibrated with limited scale model data, mainly at high bypass ratio, including a limited-range prediction of the effects of mixing-enhancement nozzle-exit chevrons on jet noise. Under Task 9 this model was extended to a wider range of conditions, particularly those appropriate for a Supersonic Business Jet, with an improvement in simulated flight effects modeling and generalization of the suppressor model. In the present task further comparisons are made over a still wider range of conditions from more test facilities. The model is also further generalized to cover single-stream nozzles of otherwise similar configuration. So the evolution of this prediction/analysis/correlation approach has been in a sense backward, from the complex to the simple; but from this approach a very robust capability is emerging. Also from these studies, some observations emerge relative to theoretical considerations. The purpose of this task is to develop an analytical, semi-empirical jet noise prediction method applicable to takeoff, sideline and approach noise of subsonic and supersonic cruise aircraft over a wide size range. The product of this task is an even more consistent and robust model for the Footprint/Radius (FOOTPR) code than even the Task 9 model. The model is validated for a wider range of cases and statistically quantified for the various reference facilities. The possible role of facility effects will thus be documented. Although the comparisons that can be accomplished within the limited resources of this task are not comprehensive, they provide a broad enough sampling to enable NASA to make an informed decision on how much further effort should be expended on such comparisons. The improved finalized model is incorporated into the FOOTPR code. MTC has also supported the adaptation of this code for incorporation in NASA s Aircraft Noise Prediction Program (ANOPP).

Acquisition and production of skilled behavior in dynamic decision-making tasks. Semiannual Status Report M.S. Thesis - Georgia Inst. of Tech., Nov. 1992

NASA Technical Reports Server (NTRS)

Kirlik, Alex; Kossack, Merrick Frank

1993-01-01

This status report consists of a thesis entitled 'Ecological Task Analysis: A Method for Display Enhancements.' Previous use of various analysis processes for the purpose of display interface design or enhancement has run the risk of failing to improve user performance due to the analysis resulting in only a sequencial listing of user tasks. Adopting an ecological approach to performing the task analysis, however, may result in the necessary modeling of an unpredictable and variable task domain required to improve user performance. Kirlik has proposed an Ecological Task Analysis framework which is designed for this purpose. It is the purpose of this research to measure this framework's effectiveness at enhancing display interfaces in order to improve user performance. Following the proposed framework, an ecological task analysis of experienced users of a complex and dynamic laboratory task, Star Cruiser, was performed. Based on this analysis, display enhancements were proposed and implemented. An experiment was then conducted to compare this new version of Star Cruiser to the original. By measuring user performance at different tasks, it was determined that during early sessions, use of the enhanced display contributed to better user performance compared to that achieved using the original display. Furthermore, the results indicate that the enhancements proposed as a result of the ecological task analysis affected user performance differently depending on whether they are enhancements which aid in the selection of a possible action or in the performance of an action. Generalizations of these findings to larger, more complex systems were avoided since the analysis was only performed on this one particular system.

Task Analysis - Its Relation to Content Analysis.

ERIC Educational Resources Information Center

Gagne, Robert M.

Task analysis is a procedure having the purpose of identifying different kinds of performances which are outcomes of learning, in order to make possible the specification of optimal instructional conditions for each kind of outcome. Task analysis may be related to content analysis in two different ways: (1) it may be used to identify the probably…

Report of the first annual airborne weapons training technology review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snyder, C.E.; Payne, G.B.; Treitler, I.E.

1990-01-01

This report documents the First Annual Airborne Weapons Training Technology Review. The Review was held at Oak Ridge Associated Universities from March 29 to 31, 1989. It was an exchange of ideas and information among the members of the network supporting the Naval Air Systems Command's (NAVAIR's) PMA205-11, Program Manager for Ordnance Training. This report describes the briefings and demonstrations presented at the Review, and summarizes the discussion at the informal caucus where significant issues were raised from the first two days' presentations. The report also contains the meeting agenda, a participant list with addresses and telephone numbers, a listmore » of the Department of Defense activities represented, NAVAIR's follow-up communication, and a brief description of Martin Marietta Energy Systems, Inc.'s training technology project support. A broad range of topics related to training systems and training support was covered during the Review. Synopses of the presentations and demonstrations included here cover computer-based and interactive systems, portability of software, reuse of training systems for different weapons, standardization of trainers, instructional systems design, cognitive task analysis, tracking of training resources, and the application of Computer-aided Acquisition and Logistic Support.« less

Azolla domestication towards a biobased economy?

PubMed

Brouwer, Paul; Bräutigam, Andrea; Külahoglu, Canan; Tazelaar, Anne O E; Kurz, Samantha; Nierop, Klaas G J; van der Werf, Adrie; Weber, Andreas P M; Schluepmann, Henriette

2014-05-01

Due to its phenomenal growth requiring neither nitrogen fertilizer nor arable land and its biomass composition, the mosquito fern Azolla is a candidate crop to yield food, fuels and chemicals sustainably. To advance Azolla domestication, we research its dissemination, storage and transcriptome. Methods for dissemination, cross-fertilization and cryopreservation of the symbiosis Azolla filiculoides-Nostoc azollae are tested based on the fern spores. To study molecular processes in Azolla including spore induction, a database of 37 649 unigenes from RNAseq of microsporocarps, megasporocarps and sporophytes was assembled, then validated. Spores obtained year-round germinated in vitro within 26 d. In vitro fertilization rates reached 25%. Cryopreservation permitted storage for at least 7 months. The unigene database entirely covered central metabolism and to a large degree covered cellular processes and regulatory networks. Analysis of genes engaged in transition to sexual reproduction revealed a FLOWERING LOCUS T-like protein in ferns with special features induced in sporulating Azolla fronds. Although domestication of a fern-cyanobacteria symbiosis may seem a daunting task, we conclude that the time is ripe and that results generated will serve to more widely access biochemicals in fern biomass for a biobased economy. No claim to original European Union works. New Phytologist © 2014 New Phytologist Trust.

A Webgis Framework for Disseminating Processed Remotely Sensed on Land Cover Transformations

NASA Astrophysics Data System (ADS)

Caradonna, Grazia; Novelli, Antonio; Tarantino, Eufemia; Cefalo, Raffaela; Fratino, Umberto

2016-06-01

Mediterranean regions have experienced significant soil degradation over the past decades. In this context, careful land observation using satellite data is crucial for understanding the long-term usage patterns of natural resources and facilitating their sustainable management to monitor and evaluate the potential degradation. Given the environmental and political interest on this problem, there is urgent need for a centralized repository and mechanism to share geospatial data, information and maps of land change. Geospatial data collecting is one of the most important task for many users because there are significant barriers in accessing and using data. This limit could be overcome by implementing a WebGIS through a combination of existing free and open source software for geographic information systems (FOSS4G). In this paper we preliminary discuss methods for collecting raster data in a geodatabase by processing open multi-temporal and multi-scale satellite data aimed at retrieving indicators for land degradation phenomenon (i.e. land cover/land use analysis, vegetation indices, trend analysis, etc.). Then we describe a methodology for designing a WebGIS framework in order to disseminate information through maps for territory monitoring. Basic WebGIS functions were extended with the help of POSTGIS database and OpenLayers libraries. Geoserver was customized to set up and enhance the website functions developing various advanced queries using PostgreSQL and innovative tools to carry out efficiently multi-layer overlay analysis. The end-product is a simple system that provides the opportunity not only to consult interactively but also download processed remote sensing data.

Application of Cognitive Task Analysis in User Requirements and Prototype Design Presentation/Briefing

DTIC Science & Technology

2005-10-01

AFRL-HE-WP-TP-2005-0030 AIR FORCE RESEARCH LABORATORY Application of Cognitive Task Analysis in User Requirements and Prototype Design Presentation...TITLE AND SUBTITLE 5a. CONTRACT NUMBER FA8650-04-C-6406 Application of Cognitive Task Analysis in User Requirements 5b.GRANTNUMBER and Prototype...maintainer experience 21 21 Questions & Answers Application of Cognitive Task Analysis in User Requirements Definition and Prototype Design Christopher Curtis

Enhancing the performance of regional land cover mapping

NASA Astrophysics Data System (ADS)

Wu, Weicheng; Zucca, Claudio; Karam, Fadi; Liu, Guangping

2016-10-01

Different pixel-based, object-based and subpixel-based methods such as time-series analysis, decision-tree, and different supervised approaches have been proposed to conduct land use/cover classification. However, despite their proven advantages in small dataset tests, their performance is variable and less satisfactory while dealing with large datasets, particularly, for regional-scale mapping with high resolution data due to the complexity and diversity in landscapes and land cover patterns, and the unacceptably long processing time. The objective of this paper is to demonstrate the comparatively highest performance of an operational approach based on integration of multisource information ensuring high mapping accuracy in large areas with acceptable processing time. The information used includes phenologically contrasted multiseasonal and multispectral bands, vegetation index, land surface temperature, and topographic features. The performance of different conventional and machine learning classifiers namely Malahanobis Distance (MD), Maximum Likelihood (ML), Artificial Neural Networks (ANNs), Support Vector Machines (SVMs) and Random Forests (RFs) was compared using the same datasets in the same IDL (Interactive Data Language) environment. An Eastern Mediterranean area with complex landscape and steep climate gradients was selected to test and develop the operational approach. The results showed that SVMs and RFs classifiers produced most accurate mapping at local-scale (up to 96.85% in Overall Accuracy), but were very time-consuming in whole-scene classification (more than five days per scene) whereas ML fulfilled the task rapidly (about 10 min per scene) with satisfying accuracy (94.2-96.4%). Thus, the approach composed of integration of seasonally contrasted multisource data and sampling at subclass level followed by a ML classification is a suitable candidate to become an operational and effective regional land cover mapping method.

Energy Conscious Design: Educational Facilities. [Brief No.] 1.

ERIC Educational Resources Information Center

American Inst. of Architects, Washington, DC.

An energy task group of the American Institute of Architects discusses design features and options that educational facility designers can use to create an energy efficient school building. Design elements cover the building envelope, energy storage system, hydronic heating/cooling systems, solar energy collection, building orientation and shape,…

General Electronics Technician.

ERIC Educational Resources Information Center

Vorderstrasse, Ron; Huston, Jane, Ed.

This module follows the "Basic Electronics" module as a guide for a course preparing students for job entry or further education. It includes those additional tasks required above Basic Electronics for job entry in the electronics field. The module contains eight instructional units that cover the following topics: (1) test equipment; (2)…

Cluster: Drafting. Course: Introduction to Technical Drafting.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of 10 units is designed for use with an instructor as an introduction to technical drafting, and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: drafting…

Cluster: Drafting. Course: Architectural Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The sequence of 10 units is designed for use with an instructor in architectural drafting, and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: architectural lettering…

Catalog of Performance Objectives and Performance Guides for Physical Therapy Occupations.

ERIC Educational Resources Information Center

Reneau, Fred; Hahn, Dave

This catalog provides a worker-based description of duties, tasks, performance objectives and guides, and related data for physical therapy occupations. Duties covered include the following: (1) performing administrative/clerical functions; (2) communicating information; (3) providing patient care services; (4) performing support service; (5)…

RADON REDUCTION AND RADON RESISTANT CONSTRUCTION DEMONSTRATIONS IN NEW YORK

EPA Science Inventory

The report covers three tasks related to indoor radon: (1) the demonstration of radon reduction techniques in 8 houses in each of two uniquely different radon prone areas of the State of New York; (2) the evaluation and repair of 14 radon mitigation systems in houses mitigated 4 ...

Mystery Fractions

ERIC Educational Resources Information Center

Bhattacharyya, Sonalee; Namakshi, Nama; Zunker, Christina; Warshauer, Hiroko K.; Warshauer, Max

2016-01-01

Making math more engaging for students is a challenge that every teacher faces on a daily basis. These authors write that they are constantly searching for rich problem-solving tasks that cover the necessary content, develop critical-thinking skills, and engage student interest. The Mystery Fraction activity provided here focuses on a key number…

Commercial Foods and Culinary Arts. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains one module for completing a course in commercial foods and culinary arts. It is designed especially for use in secondary schools in Palm Beach County, Florida. The module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information…

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

45 CFR 95.605 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... as specified in § 95.610(c). Alternative approach to APD requirements means that the State has... than the State agency to perform such tasks as feasibility studies, system studies, system design... operation of one or more of the Social Security Act programs covered by Subpart F, and (b) The State can...

45 CFR 95.605 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... as specified in § 95.610(c). Alternative approach to APD requirements means that the State has... than the State agency to perform such tasks as feasibility studies, system studies, system design... operation of one or more of the Social Security Act programs covered by Subpart F, and (b) The State can...

45 CFR 95.605 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... as specified in § 95.610(c). Alternative approach to APD requirements means that the State has... than the State agency to perform such tasks as feasibility studies, system studies, system design... operation of one or more of the Social Security Act programs covered by Subpart F, and (b) The State can...

45 CFR 95.605 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... as specified in § 95.610(c). Alternative approach to APD requirements means that the State has... than the State agency to perform such tasks as feasibility studies, system studies, system design... operation of one or more of the Social Security Act programs covered by Subpart F, and (b) The State can...

How to Plan and Implement a Workshop.

ERIC Educational Resources Information Center

Howell, Jacquie

These guidelines were developed to assist school administrators who have the responsibility of organizing a one- to three-day professional development program. The first section outlines the tasks involved in planning and implementing a workshop. The remaining sections cover the following: (1) developing and utilizing the workshop theme; (2)…

20 CFR 1002.44 - Does USERRA cover an independent contractor?

Code of Federal Regulations, 2010 CFR

2010-04-01

... managerial skill; (3) Any investment in equipment or materials required for the individual's tasks, or his or her employment of helpers; (4) Whether the service the individual performs requires a special skill... the individual performs is an integral part of the employer's business. (c) No single one of these...

Machine Shop. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains eight modules for completing a course in machine shop. It is designed especially for use in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities and resources, information sheets, student self-check with answer key,…

Piecing It Together

ERIC Educational Resources Information Center

Wickstrom, Megan H.

2014-01-01

Any of the key concepts that students need to know about area measurement are covered in the third-grade expectations detailed in the Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010). However, making sense of area measurement is not always an easy task for students; it takes time. Researchers have found that young children often…

Endophenotypes for Intelligence in Children and Adolescents

ERIC Educational Resources Information Center

van Leeuwen, Marieke; van den Berg, Stephanie M.; Hoekstra, Rosa A.; Boomsma, Dorret I.

2007-01-01

The aim of this study was to identify promising endophenotypes for intelligence in children and adolescents for future genetic studies in cognitive development. Based on the available set of endophenotypes for intelligence in adults, cognitive tasks were chosen covering the domains of working memory, processing speed, and selective attention. This…

Lower cost offshore field development utilizing autonomous vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frisbie, F.R.; Vie, K.J.; Welch, D.W.

1996-12-31

The offshore oil and gas industry has the requirement to inspect offshore oil and gas pipelines for scour, corrosion and damage as well as inspect and intervene on satellite production facilities. This task is currently performed with Remotely Operated Vehicles (ROV) operated from dynamically positioned (DP) offshore supply or diving support boats. Currently, these tasks are expensive due to the high day rates for DP ships and the slow, umbilical impeded, 1 knot inspection rates of the tethered ROVs, Emerging Autonomous Undersea Vehicle (AUV) technologies offer opportunities to perform these same inspection tasks for 50--75% lower cost, with comparable ormore » improved quality. The new generation LAPV (Linked Autonomous Power Vehicles) will operate from fixed facilities such as TLPs or FPFs and cover an operating field 10 kms in diameter.« less

Goddard High Resolution Spectrograph SV/GTO Project

NASA Technical Reports Server (NTRS)

Ebbets, Dennis

1999-01-01

Contract number NAS5-30433, known at Ball Aerospace as the GHRS SV/GTO project, supported our participation in the post-launch activities of the Goddard High Resolution Spectrograph aboard the Hubble Space Telescope. The period of performance was December 1988 through December 1998. The contract supported the involvement of Dr Dennis Ebbets in the work of the GHRS Investigation Definition Team, and several of the Ball people in the documentation and publication of results. Three main categories of tasks were covered by this contract; in-orbit calibration of the GHRS, guaranteed time observations, and education and public outreach. The nature and accomplishments of these tasks are described in the report. This summary makes many references to publications in the scientific and technical literature. Appendix A is extracted from a complete bibliography, and lists those papers that are directly related to work performed under this GHRS contract. The tasks related to the in-orbit calibration of the GHRS were by far the largest responsibility during the first six years of the project. During this period Dr. Ebbets was responsible for the definition of calibration requirements, design of experiments, preparation of observing proposals, tracking their implementation and execution, and coordinating the analysis and publication of the results. Prior to the launch of HST in 1990 the observing proposals were developed in cooperation with the scientists on the GHRS DDT, engineers at Ball Aerospace, the operations staff at the STScI, and project coordinators at GSFC.

BLINKER: Automated Extraction of Ocular Indices from EEG Enabling Large-Scale Analysis.

PubMed

Kleifges, Kelly; Bigdely-Shamlo, Nima; Kerick, Scott E; Robbins, Kay A

2017-01-01

Electroencephalography (EEG) offers a platform for studying the relationships between behavioral measures, such as blink rate and duration, with neural correlates of fatigue and attention, such as theta and alpha band power. Further, the existence of EEG studies covering a variety of subjects and tasks provides opportunities for the community to better characterize variability of these measures across tasks and subjects. We have implemented an automated pipeline (BLINKER) for extracting ocular indices such as blink rate, blink duration, and blink velocity-amplitude ratios from EEG channels, EOG channels, and/or independent components (ICs). To illustrate the use of our approach, we have applied the pipeline to a large corpus of EEG data (comprising more than 2000 datasets acquired at eight different laboratories) in order to characterize variability of certain ocular indicators across subjects. We also investigate dependence of ocular indices on task in a shooter study. We have implemented our algorithms in a freely available MATLAB toolbox called BLINKER. The toolbox, which is easy to use and can be applied to collections of data without user intervention, can automatically discover which channels or ICs capture blinks. The tools extract blinks, calculate common ocular indices, generate a report for each dataset, dump labeled images of the individual blinks, and provide summary statistics across collections. Users can run BLINKER as a script or as a plugin for EEGLAB. The toolbox is available at https://github.com/VisLab/EEG-Blinks. User documentation and examples appear at http://vislab.github.io/EEG-Blinks/.

A dimension reduction strategy for improving the efficiency of computer-aided detection for CT colonography

NASA Astrophysics Data System (ADS)

Song, Bowen; Zhang, Guopeng; Wang, Huafeng; Zhu, Wei; Liang, Zhengrong

2013-02-01

Various types of features, e.g., geometric features, texture features, projection features etc., have been introduced for polyp detection and differentiation tasks via computer aided detection and diagnosis (CAD) for computed tomography colonography (CTC). Although these features together cover more information of the data, some of them are statistically highly-related to others, which made the feature set redundant and burdened the computation task of CAD. In this paper, we proposed a new dimension reduction method which combines hierarchical clustering and principal component analysis (PCA) for false positives (FPs) reduction task. First, we group all the features based on their similarity using hierarchical clustering, and then PCA is employed within each group. Different numbers of principal components are selected from each group to form the final feature set. Support vector machine is used to perform the classification. The results show that when three principal components were chosen from each group we can achieve an area under the curve of receiver operating characteristics of 0.905, which is as high as the original dataset. Meanwhile, the computation time is reduced by 70% and the feature set size is reduce by 77%. It can be concluded that the proposed method captures the most important information of the feature set and the classification accuracy is not affected after the dimension reduction. The result is promising and further investigation, such as automatically threshold setting, are worthwhile and are under progress.

Time-Frequency Cross Mutual Information Analysis of the Brain Functional Networks Underlying Multiclass Motor Imagery.

PubMed

Gong, Anmin; Liu, Jianping; Chen, Si; Fu, Yunfa

2018-01-01

To study the physiologic mechanism of the brain during different motor imagery (MI) tasks, the authors employed a method of brain-network modeling based on time-frequency cross mutual information obtained from 4-class (left hand, right hand, feet, and tongue) MI tasks recorded as brain-computer interface (BCI) electroencephalography data. The authors explored the brain network revealed by these MI tasks using statistical analysis and the analysis of topologic characteristics, and observed significant differences in the reaction level, reaction time, and activated target during 4-class MI tasks. There was a great difference in the reaction level between the execution and resting states during different tasks: the reaction level of the left-hand MI task was the greatest, followed by that of the right-hand, feet, and tongue MI tasks. The reaction time required to perform the tasks also differed: during the left-hand and right-hand MI tasks, the brain networks of subjects reacted promptly and strongly, but there was a delay during the feet and tongue MI task. Statistical analysis and the analysis of network topology revealed the target regions of the brain network during different MI processes. In conclusion, our findings suggest a new way to explain the neural mechanism behind MI.

Inter-subject phase synchronization for exploratory analysis of task-fMRI.

PubMed

Bolt, Taylor; Nomi, Jason S; Vij, Shruti G; Chang, Catie; Uddin, Lucina Q

2018-08-01

Analysis of task-based fMRI data is conventionally carried out using a hypothesis-driven approach, where blood-oxygen-level dependent (BOLD) time courses are correlated with a hypothesized temporal structure. In some experimental designs, this temporal structure can be difficult to define. In other cases, experimenters may wish to take a more exploratory, data-driven approach to detecting task-driven BOLD activity. In this study, we demonstrate the efficiency and power of an inter-subject synchronization approach for exploratory analysis of task-based fMRI data. Combining the tools of instantaneous phase synchronization and independent component analysis, we characterize whole-brain task-driven responses in terms of group-wise similarity in temporal signal dynamics of brain networks. We applied this framework to fMRI data collected during performance of a simple motor task and a social cognitive task. Analyses using an inter-subject phase synchronization approach revealed a large number of brain networks that dynamically synchronized to various features of the task, often not predicted by the hypothesized temporal structure of the task. We suggest that this methodological framework, along with readily available tools in the fMRI community, provides a powerful exploratory, data-driven approach for analysis of task-driven BOLD activity. Copyright © 2018 Elsevier Inc. All rights reserved.

Feasibility study of a 110 watt per kilogram lightweight solar array system

NASA Technical Reports Server (NTRS)

Shepard, N. F.; Stahle, C. V.; Hanson, K. L.; Schneider, A.; Blomstrom, L. E.; Hansen, W. T.; Kirpich, A.

1973-01-01

The feasibility of a 10,000 watt solar array panel which has a minimum power-to-mass ratio of 110 watt/kg is discussed. The application of this ultralightweight solar array to three possible missions was investigated. With the interplanetary mission as a baseline, the constraining requirements for a geosynchronous mission and for a manned space station mission are presented. A review of existing lightweight solar array system concepts revealed that changes in the system approach are necessary to achieve the specified 110 watt/kg goal. A comprehensive review of existing component technology is presented in the areas of thin solar cells, solar cell covers, welded interconnectors, substrates and deployable booms. Advances in the state-of-the-art of solar cell and deployable boom technology were investigated. System level trade studies required to select the optimum boom bending stiffness, system aspect ratio, bus voltage level, and solar cell circuit arrangement are reported. Design analysis tasks included the thermal analysis of the solar cell blanket, thermal stress analysis of the solar cell interconnectors/substrate, and the thermostructural loading of the deployed boom.

Composite Overview and Composite Aerocover Overview

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Tate, LaNetra; Dokos, Adam; Taylor, Brian; Brown, Chad

2014-01-01

Materials Science Division within the Engineering Directorate tasked by the Ares Launch Vehicle Division (LX-V) and the Fluids Testing and Technology Development Branch (NE-F6) to design, fabricate and test an aerodynamic composite shield for potential Heavy Lift Launch Vehicle infusion and a composite strut that will serve as a pathfinder in evaluating calorimeter data for the CRYOSTAT (cryogenic on orbit storage and transfer) Project. ATP project is to carry the design and development of the aerodynamic composite cover or "bracket" from cradle to grave including materials research, purchasing, design, fabrication, testing, analysis and presentation of the final product. Effort consisted of support from the Materials Testing & Corrosion Control Branch (NE-L2) for mechanical testing, the Prototype Development Branch (NE-L3) for CAD drawing, design/analysis, and fabrication, Materials & Processes Engineering Branch (NE-L4) for project management and materials selection; the Applied Physics Branch (NE-LS) for NDE/NDI support; and the Chemical Analysis Branch (NE-L6) for developmental systems evaluation. Funded by the Ares Launch Vehicle Division and the Fluids Testing and Technology Development Branch will provide ODC

Development of a task analysis tool to facilitate user interface design

NASA Technical Reports Server (NTRS)

Scholtz, Jean C.

1992-01-01

A good user interface is one that facilitates the user in carrying out his task. Such interfaces are difficult and costly to produce. The most important aspect in producing a good interface is the ability to communicate to the software designers what the user's task is. The Task Analysis Tool is a system for cooperative task analysis and specification of the user interface requirements. This tool is intended to serve as a guide to development of initial prototypes for user feedback.

Coping with Uncertainty: The Joint Task Force and Multi-Service Military Operations

DTIC Science & Technology

1991-05-10

DATE =3. REPORT TYPE AND DATIS COVERED 10 -1y II ION060Nr1 4. TITLE AND SUBTITLE S. FUNDING NUMBERS cO6p i tý6, LJrTi i u N csr .-r. AJ 7y1.; -n E ryo...responsible for keeping French Morocco under control and for invading Spanish Morocco should the Franco regime become less than neutral.57 Axis control...of Ital~y, 11. 57 Ibid., 55. LT’G Mark Clark, commziandiny Fifth U.S. Army in French Morocco , would have been selected to lead the American task

Making sense of the noise: Replication difficulties of Correll's (2008) modulation of 1/f noise in a racial bias task.

PubMed

Madurski, Christine; LeBel, Etienne P

2015-08-01

Correll (Journal of Personality and Social Psychology, 94, 48-59, 2008; Study 2) found that instructions to use or avoid race information decreased the emission of 1/f noise in a weapon identification task (WIT). These results suggested that 1/f noise in racial bias tasks reflected an effortful deliberative process, providing new insights regarding the mechanisms underlying implicit racial biases. Given the potential theoretical and applied importance of understanding the psychological processes underlying implicit racial biases - and in light of the growing demand for independent direct replications of findings to ensure the cumulative nature of our science - we attempted to replicate Correll's finding in two high-powered studies. Despite considerable effort to closely duplicate all procedural and methodological details of the original study (i.e., same cover story, experimental manipulation, implicit measure task, original stimuli, task instructions, sampling frame, population, and statistical analyses), both replication attempts were unsuccessful in replicating the original finding challenging the theoretical account that 1/f noise in racial bias tasks reflects a deliberative process. However, the emission of 1/f noise did consistently emerge across samples in each of our conditions. Hence, future research is needed to clarify the psychological significance of 1/f noise in racial bias tasks.

Effort-Based Decision Making: A Novel Approach for Assessing Motivation in Schizophrenia

PubMed Central

Green, Michael F.; Horan, William P.; Barch, Deanna M.; Gold, James M.

2015-01-01

Because negative symptoms, including motivational deficits, are a critical unmet need in schizophrenia, there are many ongoing efforts to develop new pharmacological and psychosocial interventions for these impairments. A common challenge of these studies involves how to evaluate and select optimal endpoints. Currently, all studies of negative symptoms in schizophrenia depend on ratings from clinician-conducted interviews. Effort-based decision-making tasks may provide a more objective, and perhaps more sensitive, endpoint for trials of motivational negative symptoms. These tasks assess how much effort a person is willing to exert for a given level of reward. This area has been well-studied with animal models of effort and motivation, and effort-based decision-making tasks have been adapted for use in humans. Very recently, several studies have examined physical and cognitive types of effort-based decision-making tasks in cross-sectional studies of schizophrenia, providing evidence for effort-related impairment in this illness. This article covers the theoretical background on effort-based decision-making tasks to provide a context for the subsequent articles in this theme section. In addition, we review the existing literature of studies using these tasks in schizophrenia, consider some practical challenges in adapting them for use in clinical trials in schizophrenia, and discuss interpretive challenges that are central to these types of tasks. PMID:26089350

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Geriatric Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This task analysis for nursing education provides performance standards, steps to be followed, knowledge required, attitudes to be developed, safety procedures, and equipment and supplies needed for 13 tasks performed by geriatric aides in the duty area of performing diagnostic measures and for 30 tasks in the duty area of providing therapeutic…

Task Analysis for Legal Assistant Program. Final Report.

ERIC Educational Resources Information Center

Schrader, Marvin A.; Knight, John

The Legal Assistant Task Analysis Project was undertaken to provide data related to the importance of tasks and the frequency of tasks that are, or could be, assigned to an assistant. In order to accomplish this, a task survey form was constructed and distributed to a sample of attorneys in (1) private practice, (2) companies or corporations, and…

A Pragmatic Cognitive System Engineering Approach to Model Dynamic Human Decision-Making Activities in Intelligent and Automated Systems

DTIC Science & Technology

2003-10-01

Among the procedures developed to identify cognitive processes, there are the Cognitive Task Analysis (CTA) and the Cognitive Work Analysis (CWA...of Cognitive Task Design. [11] Potter, S.S., Roth, E.M., Woods, D.D., and Elm, W.C. (2000). Cognitive Task Analysis as Bootstrapping Multiple...Converging Techniques, In Schraagen, Chipman, and Shalin (Eds.). Cognitive Task Analysis . Mahwah, NJ: Lawrence Erlbaum Associates. [12] Roth, E.M

Navigating the murky waters of colorectal cancer screening and health reform.

PubMed

Green, Beverly B; Coronado, Gloria D; Devoe, Jennifer E; Allison, James

2014-06-01

The Affordable Care Act (ACA) mandates that both Medicaid and insurance plans cover life-saving preventive services recommended by the US Preventive Services Task Force, including colorectal cancer (CRC) screening and choice between colonoscopy, flexible sigmoidoscopy, and fecal occult blood testing (FOBT). People who choose FOBT or sigmoidoscopy as their initial test could face high, unexpected, out-of-pocket costs because the mandate does not cover needed follow-up colonoscopies after positive tests. Some people will have no coverage for any CRC screening because of lack of state participation in the ACA or because they do not qualify (e.g., immigrant workers). Existing disparities in CRC screening and mortality will worsen if policies are not corrected to fully cover both initial and follow-up testing.

Upgrade Summer Severe Weather Tool in MIDDS

NASA Technical Reports Server (NTRS)

Wheeler, Mark M.

2010-01-01

The goal of this task was to upgrade the severe weather database from the previous phase by adding weather observations from the years 2004 - 2009, re-analyze the data to determine the important parameters, make adjustments to the index weights depending on the analysis results, and update the MIDDS GUI. The added data increased the period of record from 15 to 21 years. Data sources included local forecast rules, archived sounding data, surface and upper air maps, and two severe weather event databases covering east-central Florida. Four of the stability indices showed increased severe weather predication. The Total Threat Score (TTS) of the previous work was verified for the warm season of 2009 with very good skill. The TTS Probability of Detection (POD) was 88% and the False alarm rate (FAR) of 8%. Based on the results of the analyses, the MIDDS Severe Weather Worksheet GUI was updated to assist the duty forecaster by providing a level of objective guidance based on the analysis of the stability parameters and synoptic-scale dynamics.

Laboratory Studies of Thermal Energy Charge Transfer of Silicon and Iron Ions in Astrophysical Plasmas

NASA Technical Reports Server (NTRS)

Kwong, Victor H. S.

1996-01-01

Charge transfer at electron-volt energies between multiply charged atomic ions and neutral atoms and molecules is of considerable importance in astrophysics, plasma physics, and in particular, fusion plasmas. In the year covered by this report, several major tasks were completed. These include: (1) the re-calibration of the ion gauge to measure the absolute particle densities of H2, He, N2, and CO for our current measurements; (2) the analysis of data for charge transfer reactions of N(exp 2 plus) ion and He, H2, N2, and CO; (3) measurement and data analysis of the charge transfer reaction of (Fe(exp 2 plus) ion and H2; (4) charge transfer measurement of Fe(exp 2 plus) ion and H2; and (5) redesign and modification of the ion detection and data acquisition system for the low energy beam facility (reflection time of flight mass spectrometer) dedicated to the study of state select charge transfer.

Development and application of operational techniques for the inventory and monitoring of resources and uses for the Texas coastal zone

NASA Technical Reports Server (NTRS)

Harwood, P. (Principal Investigator); Finley, R.; Mcculloch, S.; Marphy, D.; Hupp, B.

1976-01-01

The author has identified the following significant results. Image interpretation mapping techniques were successfully applied to test site 5, an area with a semi-arid climate. The land cover/land use classification required further modification. A new program, HGROUP, added to the ADP classification schedule provides a convenient method for examining the spectral similarity between classes. This capability greatly simplifies the task of combining 25-30 unsupervised subclasses into about 15 major classes that approximately correspond to the land use/land cover classification scheme.

Synergetic Use of Crowdsourcing for Environmental Science Research, Applications and Education

NASA Astrophysics Data System (ADS)

Nair, U. S.; Thau, D.

2015-12-01

Environmental science research and applications often utilize information that is not readily available or routinely collected by government agencies. Whereas, the quality and quantity of environmental monitoring data is continually improving (e. g., spectral and spatial resolution of satellite imagery) contextual information needed to effectively utilize the data is sparse. Examples of such contextual information include ground truth data for land cover classification, presence/absence of species, prevalence of mosquito breeding sites and characteristics of urban land cover. Often, there are no agencies tasked with routine collection of such contextual information, which could be effectively collected through crowdsourcing. Crowdsourcing of such information, that is useful for environmental science research and applications, also provide opportunities for experiential learning at all levels of education. Appropriately designed crowdsourcing activity can be transform students from passive recipients of information to generators of knowledge. Multiple examples of synergistic use of crowdsourcing, developed by the Public Environmental Education and Research Apps (PEERA) group, at the University of Alabama in Huntsville will be presented. One example is crowdsourcing of land use and land cover (LULC) data using Open Data Kit (ODK) and associated analysis of satellite imagery using Google Earth Engine (GEE). Implementation of this activity as inquiry based learning exercise, for both middle school and for pre-service teachers will be discussed. Another example will detail the synergy between crowdsourcing for biodiversity mapping in southern India and environmental education. Other crowdsourcing activities that offer potential for synergy between research and public education will also be discussed.

Mind-wandering, cognition, and performance: a theory-driven meta-analysis of attention regulation.

PubMed

Randall, Jason G; Oswald, Frederick L; Beier, Margaret E

2014-11-01

The current meta-analysis accumulates empirical findings on the phenomenon of mind-wandering, integrating and interpreting findings in light of psychological theories of cognitive resource allocation. Cognitive resource theory emphasizes both individual differences in attentional resources and task demands together to predict variance in task performance. This theory motivated our conceptual and meta-analysis framework by introducing moderators indicative of task-demand to predict who is more likely to mind-wander under what conditions, and to predict when mind-wandering and task-related thought are more (or less) predictive of task performance. Predictions were tested via a random-effects meta-analysis of correlations obtained from normal adult samples (k = 88) based on measurement of specified episodes of off-task and/or on-task thought frequency and task performance. Results demonstrated that people with fewer cognitive resources tend to engage in more mind-wandering, whereas those with more cognitive resources are more likely to engage in task-related thought. Addressing predictions of resource theory, we found that greater time-on-task-although not greater task complexity-tended to strengthen the negative relation between cognitive resources and mind-wandering. Additionally, increases in mind-wandering were generally associated with decreases in task performance, whereas increases in task-related thought were associated with increased performance. Further supporting resource theory, the negative relation between mind-wandering and performance was more pronounced for more complex tasks, though not longer tasks. Complementarily, the positive association between task-related thought and performance was stronger for more complex tasks and for longer tasks. We conclude by discussing implications and future research directions for mind-wandering as a construct of interest in psychological research. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

The Relationship between Rating Scales Used to Evaluate Tasks from Task Inventories for Licensure and Certification Examinations

ERIC Educational Resources Information Center

Cadle, Adrienne Woodley

2012-01-01

The first step in developing or updating a licensure or certification examination is to conduct a job or task analysis. Following completion of the job analysis, a survey validation study is performed to validate the results of the job analysis and to obtain task ratings so that an examination blueprint may be created. Psychometricians and job…

Improving patient care over weekends by reducing on-call work load and better time management

PubMed Central

Gardezi, Syed Anjum Ali

2014-01-01

The Royal College of Physicians states that “handover, particularly of temporary ‘on-call’ responsibility, has been identified as a point at which errors are likely to occur.”[1] Working a weekend on-call covering medical wards is often busy and stressful for all junior doctors. The high volume of routine and unplanned tasks make the situation even worse. In Nevill Hall hospital Abergavenny, we measured the workload on a junior doctor for medical ward cover on weekends by counting the number of times he/she was bleeped for routine tasks. Initial study demonstrated that on average 30–40% of time on a long day shift was spent on jobs which could have been done on the preceding Friday. The “FRIDAYS” checklist was introduced for clinical staff (particularly junior doctors) to identify these jobs. According to this model, all the junior doctors were encouraged to review: F: Phlebotomy R: Rewriting drug charts I: IV fluids D: discharge summaries A: Antibiotic review Y: Yellow book/Warfarin dose S: Status of resuscitation and escalation plans before leaving the wards on Friday afternoon. This implementation successfully showed reduction in weekend workload, allowing the ward cover to be focused on care and safety of comparatively sick patients while at the same time reducing the stress for the on-call team. PMID:26734257

Cognitive Task Analysis and Work-Centered Support System Recommendations for a Deployed Network Operations Support Center (NOSC-D)

DTIC Science & Technology

2001-08-01

This report presents the results of a preliminary Cognitive Task Analysis (CTA) of the deployed Network Operations Support Center (NOSC-D), and the...conducted Cognitive Task Analysis interviews with four (4) NOSC-D personnel. Because of the preliminary nature of the finding, the analysis is

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... classroom, simulator, computer-based, hands-on, or other formally structured training and testing, except... for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements...) Based on a formal task analysis, identify the installation, maintenance, repair, modification...

Designing Preclinical Instruction for Psychomotor Skills (II)--Instructional Engineering: Task Analysis.

ERIC Educational Resources Information Center

Knight, G. William; And Others

1994-01-01

The first step in engineering the instruction of dental psychomotor skills, task analysis, is explained. A chart details the procedural, cognitive, desired-criteria, and desired-performance analysis of a single task, occlusal preparation for amalgam restoration with carious lesion. (MSE)

Mission analysis of photovoltaic solar energy systems. Quarterly progress report, 1 March 1976-31 May 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leonard, S.L.; Munjal, P.K.; Rattin, E.J.

1976-06-01

The main emphasis of the activity during the second quarter of this project continued to be on Task 1, Analysis of Near-Term Missions, and on Task 2, Analysis of Major Mid-Term Missions. In addition, considerable progress was also made on Task 6, Comparison of the True Societal Costs of Conventional and Photovoltaic Power Production, and starts were made on Task 3, Review and Updating of the ERDA Technology Implementation Plan, and Task 4, Critical External Issues. As was planned, work on Task 5, Impact of Incentives, was deferred to the second half of the program. Progress is reported. (WHK)

Convection in Extratropical Cyclones: Analysis of GPM, NexRAD, GCMs and Re-Analysis

NASA Astrophysics Data System (ADS)

Jeyaratnam, J.; Booth, J. F.; Naud, C. M.; Luo, J.

2017-12-01

Extratropical Cyclones (ETCs) are the most common cause of extreme precipitation in mid-latitudes and are important in the general atmospheric circulation as they redistribute moisture and heat. Isentropic lifting, upright convection, and slantwise convection are mechanisms of vertical motion within an ETC, which deliver different rain rates and might respond differently to global warming. In this study we compare different metrics for identifying convection within the ETC's and calculate the relative contribution of convection to total ETC precipitation. We determine if convection occurs preferentially in specific regions of the storm and decide how to best utilize GPM retrievals covering other parts of the mid-latitudes. Additionally, mid-latitude cyclones are tracked and composites of these tracked cyclones are compared amongst multiple versions of Global Circulation Models (GCMs) from Coupled Model Intercomparison Project Phase 6 (CMIP6) prototype models and re-analysis data; Model Diagnostic Task Force (MDTF) Geophysical Fluid Dynamics Laboratory (GFDL) using a two-plume convection scheme, MDTF GFDL using the Donner convection scheme, Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), and European Reanalysis produced by the European Center for Medium-Range Weather Forecasts (ECMWF).

Landsat real-time processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, E.L.

A novel method for performing real-time acquisition and processing Landsat/EROS data covers all aspects including radiometric and geometric corrections of multispectral scanner or return-beam vidicon inputs, image enhancement, statistical analysis, feature extraction, and classification. Radiometric transformations include bias/gain adjustment, noise suppression, calibration, scan angle compensation, and illumination compensation, including topography and atmospheric effects. Correction or compensation for geometric distortion includes sensor-related distortions, such as centering, skew, size, scan nonlinearity, radial symmetry, and tangential symmetry. Also included are object image-related distortions such as aspect angle (altitude), scale distortion (altitude), terrain relief, and earth curvature. Ephemeral corrections are also applied to compensatemore » for satellite forward movement, earth rotation, altitude variations, satellite vibration, and mirror scan velocity. Image enhancement includes high-pass, low-pass, and Laplacian mask filtering and data restoration for intermittent losses. Resource classification is provided by statistical analysis including histograms, correlational analysis, matrix manipulations, and determination of spectral responses. Feature extraction includes spatial frequency analysis, which is used in parallel discriminant functions in each array processor for rapid determination. The technique uses integrated parallel array processors that decimate the tasks concurrently under supervision of a control processor. The operator-machine interface is optimized for programming ease and graphics image windowing.« less

Recombinant drugs-on-a-chip: The usage of capillary electrophoresis and trends in miniaturized systems - A review.

PubMed

Morbioli, Giorgio Gianini; Mazzu-Nascimento, Thiago; Aquino, Adriano; Cervantes, Cesar; Carrilho, Emanuel

2016-09-07

We present here a critical review covering conventional analytical tools of recombinant drug analysis and discuss their evolution towards miniaturized systems foreseeing a possible unique recombinant drug-on-a-chip device. Recombinant protein drugs and/or pro-drug analysis require sensitive and reproducible analytical techniques for quality control to ensure safety and efficacy of drugs according to regulatory agencies. The versatility of miniaturized systems combined with their low-cost could become a major trend in recombinant drugs and bioprocess analysis. Miniaturized systems are capable of performing conventional analytical and proteomic tasks, allowing for interfaces with other powerful techniques, such as mass spectrometry. Microdevices can be applied during the different stages of recombinant drug processing, such as gene isolation, DNA amplification, cell culture, protein expression, protein separation, and analysis. In addition, organs-on-chips have appeared as a viable alternative to testing biodrug pharmacokinetics and pharmacodynamics, demonstrating the capabilities of the miniaturized systems. The integration of individual established microfluidic operations and analytical tools in a single device is a challenge to be overcome to achieve a unique recombinant drug-on-a-chip device. Copyright © 2016 Elsevier B.V. All rights reserved.

Brain activity across the development of automatic categorization: A comparison of categorization tasks using multi-voxel pattern analysis

PubMed Central

Soto, Fabian A.; Waldschmidt, Jennifer G.; Helie, Sebastien; Ashby, F. Gregory

2013-01-01

Previous evidence suggests that relatively separate neural networks underlie initial learning of rule-based and information-integration categorization tasks. With the development of automaticity, categorization behavior in both tasks becomes increasingly similar and exclusively related to activity in cortical regions. The present study uses multi-voxel pattern analysis to directly compare the development of automaticity in different categorization tasks. Each of three groups of participants received extensive training in a different categorization task: either an information-integration task, or one of two rule-based tasks. Four training sessions were performed inside an MRI scanner. Three different analyses were performed on the imaging data from a number of regions of interest (ROIs). The common patterns analysis had the goal of revealing ROIs with similar patterns of activation across tasks. The unique patterns analysis had the goal of revealing ROIs with dissimilar patterns of activation across tasks. The representational similarity analysis aimed at exploring (1) the similarity of category representations across ROIs and (2) how those patterns of similarities compared across tasks. The results showed that common patterns of activation were present in motor areas and basal ganglia early in training, but only in the former later on. Unique patterns were found in a variety of cortical and subcortical areas early in training, but they were dramatically reduced with training. Finally, patterns of representational similarity between brain regions became increasingly similar across tasks with the development of automaticity. PMID:23333700

CMS tier structure and operation of the experiment-specific tasks in Germany

NASA Astrophysics Data System (ADS)

Nowack, A.

2008-07-01

In Germany, several university institutes and research centres take part in the CMS experiment. Concerning the data analysis, a couple of computing centres at different Tier levels, ranging from Tier 1 to Tier 3, exists at these places. The German Tier 1 centre GridKa at the research centre at Karlsruhe serves all four LHC experiments as well as four non-LHC experiments. With respect to the CMS experiment, GridKa is mainly involved in central tasks. The Tier 2 centre in Germany consists of two sites, one at the research centre DESY at Hamburg and one at RWTH Aachen University, forming a federated Tier 2 centre. Both parts cover different aspects of a Tier 2 centre. The German Tier 3 centres are located at the research centre DESY at Hamburg, at RWTH Aachen University, and at the University of Karlsruhe. Furthermore the building of a German user analysis facility is planned. Since the CMS community in German is rather small, a good cooperation between the different sites is essential. This cooperation includes physical topics as well as technical and operational issues. All available communication channels such as email, phone, monthly video conferences, and regular personal meetings are used. For example, the distribution of data sets is coordinated globally within Germany. Also the CMS-specific services such as the data transfer tool PhEDEx or the Monte Carlo production are operated by people from different sites in order to spread the knowledge widely and increase the redundancy in terms of operators.

[In-depth assessment of work-related stress in a major company undergoing restructuring].

PubMed

Magrini, Andrea; Pelagalli, Maria Felicia; Pietroiusti, Antonio; Livigni, Lucilla; Guidi, Stefano; Moscatelli, Maurizia; Mascioli, Marco; D'Orsi, Fulvio; Zolla, Antonella; Bagnara, Sebastiano

2015-07-08

An in-depth assessment of work-related stress was conducted in a major national telecommunications company undergoing major changes. The assessment was made on three homogeneous groups of workers and covered a large representative sample of the corresponding populations. To identify the main sources of stress for the three populations of workers, stimulate a discussion on the possible corrective actions, and assess the impact of the on-going organizational changes on workers' health. The assessment started with an analysis of the objective stress indicators listed in the INAIL (National Insurance Institute for Occupational Diseases and Accidents) Checklist. This was followed by a combination of qualitative and quantitative investigations on work context and tasks and on the subjective perceptions of workers, which were carried out by using: semi-structured interviews with management, field observations of work tasks, focus groups and questionnaires (GHQ-12, HSE Indicator Tool, ad-hoc questionnaire). The assessment allowed identification of the critical areas to be addressed with specific interventions: relationship with the company, work performance, work organization, and equipment. the investigation allowed to identification of specific practical actions (improvement of technological tools; professional development through training courses) as well as strategic actions ( re-establish relationship of trust with the company) so as to mitigate the workers' level of stress. Analysis of the results also showed that the three targeted populations differed in the degree of acceptance and understanding of the organizational changes.

Deficits in working memory and motor performance in the APP/PS1ki mouse model for Alzheimer's disease.

PubMed

Wirths, Oliver; Breyhan, Henning; Schäfer, Stephanie; Roth, Christian; Bayer, Thomas A

2008-06-01

The APP/PS1ki mouse model for Alzheimer's disease (AD) exhibits robust brain and spinal cord axonal degeneration and hippocampal CA1 neuron loss starting at 6 months of age. It expresses human mutant APP751 with the Swedish and London mutations together with two FAD-linked knocked-in mutations (PS1 M233T and PS1 L235P) in the murine PS1 gene. The present report covers a phenotypical analysis of this model using either behavioral tests for working memory and motor performance, as well as an analysis of weight development and body shape. At the age of 6 months, a dramatic, age-dependent change in all of these properties and characteristics was observed, accompanied by a significantly reduced ability to perform working memory and motor tasks. The APP/PS1ki mice were smaller and showed development of a thoracolumbar kyphosis, together with an incremental loss of body weight. While 2-month-old APP/PS1ki mice were inconspicuous in all of these tasks and properties, there is a massive age-related impairment in all tested behavioral paradigms. We have previously reported robust axonal degeneration in brain and spinal cord, as well as abundant hippocampal CA1 neuron loss starting at 6 months of age in the APP/PS1ki mouse model, which coincides with the onset of motor and memory deficits described in the present report.

Is crossed laterality associated with academic achievement and intelligence? A systematic review and meta-analysis.

PubMed

Ferrero, Marta; West, Gillian; Vadillo, Miguel A

2017-01-01

Over the last century, sporadic research has suggested that people whose hand, eye, foot, or ear dominances are not consistently right- or left-sided are at special risk of suffering academic difficulties. This phenomenon is known as crossed laterality. Although the bulk of this research dates from 1960's and 1970's, crossed laterality is becoming increasingly popular in the area of school education, driving the creation of several interventions aimed at restoring or consolidating lateral dominance. However, the available evidence is fragmentary. To determine the impact of crossed laterality on academic achievement and intelligence, we conducted a systematic review and meta-analysis of articles published since 1900. The inclusion criteria for the review required that studies used one or more lateral preference tasks for at least two specific parts of the body; they included a valid measure of crossed laterality; they measured the impact of crossed laterality on academic achievement or intelligence; and they included participants between 3 and 17 years old. The final sample included 26 articles that covered a total population of 3578 children aged 5 to 12. Taken collectively, the results of these studies do not support the claim that there is a reliable association between crossed laterality and either academic achievement or intelligence. Along with this, we detected important shortcomings in the literature, such as considerable heterogeneity among the variables used to measure laterality and among the tasks utilized to measure the outcomes. The educational implications of these results are discussed.

Surgical task analysis of simulated laparoscopic cholecystectomy with a navigation system.

PubMed

Sugino, T; Kawahira, H; Nakamura, R

2014-09-01

   Advanced surgical procedures, which have become complex and difficult, increase the burden of surgeons. Quantitative analysis of surgical procedures can improve training, reduce variability, and enable optimization of surgical procedures. To this end, a surgical task analysis system was developed that uses only surgical navigation information.    Division of the surgical procedure, task progress analysis, and task efficiency analysis were done. First, the procedure was divided into five stages. Second, the operating time and progress rate were recorded to document task progress during specific stages, including the dissecting task. Third, the speed of the surgical instrument motion (mean velocity and acceleration), as well as the size and overlap ratio of the approximate ellipse of the location log data distribution, was computed to estimate the task efficiency during each stage. These analysis methods were evaluated based on experimental validation with two groups of surgeons, i.e., skilled and "other" surgeons. The performance metrics and analytical parameters included incidents during the operation, the surgical environment, and the surgeon's skills or habits.    Comparison of groups revealed that skilled surgeons tended to perform the procedure in less time and involved smaller regions; they also manipulated the surgical instruments more gently.    Surgical task analysis developed for quantitative assessment of surgical procedures and surgical performance may provide practical methods and metrics for objective evaluation of surgical expertise.

Episodic memory change in late adulthood: generalizability across samples and performance indices.

PubMed

Dixon, Roger A; Wahlin, Ake; Maitland, Scott B; Hultsch, David F; Hertzog, Christopher; Bäckman, Lars

2004-07-01

Younger adults recall more information from episodic memory tasks than do older adults. Because longitudinal studies are rare and often incompatible, the extent of actual late-life memory change is not well established. We assemble two different longitudinal samples of normal older adults, each of which is tested twice at a 3-year interval, using a large battery of episodic memory indicators. Together, two-wave data from both the Victoria Longitudinal Study in Canada (n = 400) and the Kungsholmen Project in Sweden (n = 168) cover a 40-year span of adulthood, ranging from 54 to 94 years of age. Principal memory tasks include categorizable word lists, story recall, and random word lists, as well as indicators of cognitive support. Overall, an examination of performance on sets of common and complementary episodic tasks reveals that, for both samples, actual 3-year changes are modest and that, when decline occurs, it is gradual. The exception-greater decline for more supported tasks-suggests that these may be especially sensitive to late-life changes.

Theory of mind in dogs: is the perspective-taking task a good test?

PubMed

Roberts, William A; Macpherson, Krista

2011-12-01

Udell, Dorey, and Wynne (in press) have reported an experiment in which wolves, shelter dogs, and pet dogs all showed a significant preference for begging from a person who faced them (seer) over a person whose back was turned to them (blind experimenter). On tests with the blind person's eyes covered with a bucket, a book, or a camera, pet dogs showed more preference for the seer than did wolves and shelter dogs. We agree with the authors' position that most of these findings are best explained by preexperimental learning experienced by the subjects. We argue, however, that the perspective-taking task is not a good test of the domestication theory or of the theory of mind in dogs. The problem we see is that use of the perspective-taking task, combined with preexperimental learning in all the subjects, strongly biases the outcome in favor of a behavioral learning interpretation. Tasks less influenced by preexperimental training would provide less confounded tests of domestication and theory of mind.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objective of the contract is to consolidate the advances made during the previous contract in the conversion of syngas to motor fuels using Molecular Sieve-containing catalysts and to demonstrate the practical utility and economic value of the new catalyst/process systems with appropriate laboratory runs. Work on the program is divided into the following six tasks: (1) preparation of a detailed work plan covering the entire performance of the contract; (2) techno-economic studies that will supplement those that are presently being carried out by MITRE; (3) optimization of the most promising catalysts developed under prior contract; (4) optimization of themore » UCC catalyst system in a manner that will give it the longest possible service life; (5) optimization of a UCC process/catalyst system based upon a tubular reactor with a recycle loop containing the most promising catalyst developed under Tasks 3 and 4 studies; and (6) economic evaluation of the optimal performance found under Task 5 for the UCC process/catalyst system. Progress reports are presented for Tasks 1, 3, 4, and 5.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objective of the contract is to consolidate the advances made during the previous contract in the conversion of syngas to motor fuels using Molecular Sieve-containing catalysts and to demonstrate the practical utility and economic value of the new catalyst/process systems with appropriate laboratory runs. Work on the program is divided into the following six tasks: (1) preparation of a detailed work plan covering the entire performance of the contract; (2) preliminary techno-economic assessment of the UCC catalyst/process system; (3) optimization of the most promising catalyst developed under prior contract; (4) optimization of the UCC catalyst system in a mannermore » that will give it the longest possible service life; (5) optimization of a UCC process/catalyst system based upon a tubular reactor with a recycle loop containing the most promising catalyst developed under Tasks 3 and 4 studies; and (6) economic evaluation of the optimal performance found under Task 5 for the UCC process/catalyst system. Progress reports are presented for tasks 2 through 5. 232 figs., 19 tabs.« less

Current Status and Tasks in Development of Cable Recycling Technology

NASA Astrophysics Data System (ADS)

Ezure, Takashi; Goto, Kazuhiko

This paper shows current status and tasks in development of cable recycling technology and it’s items to be solved. Electric cable recycle system has been activated especially for copper conductor recycle in Japan. Previously removed cable coverings materials were mainly land filled. But landfill capacity is decreased and limited in recent years, at the same time, recycle technology was highly developed. A cable recycle technology has 4 tasks. (1) Applying new high efficiency separation system instead of electrostatic and gravity methods to classify mixed various kind of plastics materials including recently developed ecological material (ex PE, PVC, Rubber), (2) Removing heavy metal, especially lead from PVC material, (3) Treatment of optical glass fiber core, which has possibility going to be harmful micro particles, and (4) Establishment of social recycle system for electric wire and cable. Taking action for these tasks shall be proceeded under environmentally sensitive technology together with local government, user, manufacturer, and waste-disposal company on cost performance basis.

Effects of monetary reward and punishment on information checking behaviour.

PubMed

Li, Simon Y W; Cox, Anna L; Or, Calvin; Blandford, Ann

2016-03-01

Two experiments were conducted to examine whether checking one's own work can be motivated by monetary reward and punishment. Participants were randomly assigned to one of three conditions: a flat-rate payment for completing the task (Control); payment increased for error-free performance (Reward); payment decreased for error performance (Punishment). Experiment 1 (N = 90) was conducted with liberal arts students, using a general data-entry task. Experiment 2 (N = 90) replicated Experiment 1 with clinical students and a safety-critical 'cover story' for the task. In both studies, Reward and Punishment resulted in significantly fewer errors, more frequent and longer checking, than Control. No such differences were obtained between the Reward and Punishment conditions. It is concluded that error consequences in terms of monetary reward and punishment can result in more accurate task performance and more rigorous checking behaviour than errors without consequences. However, whether punishment is more effective than reward, or vice versa, remains inconclusive. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Word Fluency: A Task Analysis.

ERIC Educational Resources Information Center

Laine, Matti

It is suggested that models of human problem solving are useful in the analysis of word fluency (WF) test performance. In problem-solving terms, WF tasks would require the subject to define and clarify the conditions of the task (task acquisition), select and employ appropriate strategies, and monitor one's performance. In modern neuropsychology,…

Applied cognitive task analysis (ACTA): a practitioner's toolkit for understanding cognitive task demands.

PubMed

Militello, L G; Hutton, R J

1998-11-01

Cognitive task analysis (CTA) is a set of methods for identifying cognitive skills, or mental demands, needed to perform a task proficiently. The product of the task analysis can be used to inform the design of interfaces and training systems. However, CTA is resource intensive and has previously been of limited use to design practitioners. A streamlined method of CTA, Applied Cognitive Task Analysis (ACTA), is presented in this paper. ACTA consists of three interview methods that help the practitioner to extract information about the cognitive demands and skills required for a task. ACTA also allows the practitioner to represent this information in a format that will translate more directly into applied products, such as improved training scenarios or interface recommendations. This paper will describe the three methods, an evaluation study conducted to assess the usability and usefulness of the methods, and some directions for future research for making cognitive task analysis accessible to practitioners. ACTA techniques were found to be easy to use, flexible, and to provide clear output. The information and training materials developed based on ACTA interviews were found to be accurate and important for training purposes.

The impact of duty cycle workflow on sign-out practices: a qualitative study of an internal medicine residency program in Maryland, USA

PubMed Central

Lee, Soo-Hoon; Desai, Sanjay V

2017-01-01

Objectives Although JCAHO requires a standardised approach to handoffs, and while many standardised protocols have been tested, sign-out practices continue to vary. We believe this is due to the variability in workflow during inpatient duty cycle. We investigate the impact of such workflows on intern sign-out practices. Design We employed a prospective, grounded theory mixed-method design. Setting The study was conducted at a residency programme in the mid-Atlantic USA. Two observers randomly evaluated three types of daily sign-outs for 1 week every 3 months from September 2013 to March 2014. The compliance of each observed behaviour to JCAHO’s Handoff Communication Checklist was recorded. Participants Thirty one interns conducting 134 patient sign-outs were observed randomly among the 52 in the programme. Results In the 06:00 to 07:00 sign-back, the night-cover focused on providing information on overnight events to the day interns. In the 11:00 to 12:00 sign-out, the night-cover focused on transferring task accountability to a day-cover intern before departure. In the 20:00 to 21:00 sign-out, the day interns focused on transferring responsibility of their patients to a night-cover. Conclusion Different sign-out periods had different emphases regarding information exchange, personal responsibility and task accountability. Sign-outs are context-specific, implying that across-the-board standardised sign-out protocols are likely to have limited efficacy and compliance. Standardisation may need to be relative to the specific type and purpose of each sign-out to be supported by interns. PMID:28487461

Wisconsin's Model Academic Standards for Marketing Education. Bulletin No. 9005.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This document contains standards for the academic content of the Wisconsin K-12 curriculum in the area of marketing education. Developed by task forces of educators, parents, board of education members, and employers and employees, the standards cover content, performance, and proficiency areas. The first part of the guide is an introduction that…

Increasing Text Comprehension and Graphic Note Taking Using a Partial Graphic Organizer

ERIC Educational Resources Information Center

Robinson, Daniel H.; Katayama, Andrew D.; Beth, Alicia; Odom, Susan; Hsieh, Ya-Ping; Vanderveen, Arthur

2006-01-01

In 3 quasi-experiments using intact classrooms and 1 true experiment using random assignment, students completed partially complete graphic organizers (GOs) or studied complete GOs that covered course content. The partial task led to increased overall examination performance in all experiments. Also, the authors measured students' note-taking…

Development of a Work Sample Criterion for General Vehicle Mechanic.

ERIC Educational Resources Information Center

Engel, John D.

A work sample criterion test was developed for General Vehicle Repairman, MOS 63C30 and 63C40. Test items covered three task categories: troubleshooting, corrective action, and preventive maintenance. Thirty-eight organizational mechanics were tested at Fort Knox, Kentucky. Data were also collected on the quality of performance, for example, use…

Interpreting Underwater Acoustic Images of the Upper Ocean Boundary Layer

ERIC Educational Resources Information Center

Ulloa, Marco J.

2007-01-01

A challenging task in physical studies of the upper ocean using underwater sound is the interpretation of high-resolution acoustic images. This paper covers a number of basic concepts necessary for undergraduate and postgraduate students to identify the most distinctive features of the images, providing a link with the acoustic signatures of…

Energy Conservation in the Home. Performance Based Lesson Plans.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery. Home Economics Service.

These ten performance-based lesson plans concentrate on tasks related to energy conservation in the home. They are (1) caulk cracks, holes, and joints; (2) apply weatherstripping to doors and windows; (3) add plastic/solar screen window covering; (4) arrange furniture for saving energy; (5) set heating/cooling thermostat; (6) replace faucet…

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

Blended Learning in a Teacher Training Course: Integrated Interactive E-Learning and Contact Learning

ERIC Educational Resources Information Center

Kupetz, Rita; Ziegenmeyer, Brigit

2005-01-01

The paper discusses a blended learning concept for a university teacher training course for prospective teachers of English. The concept aims at purposeful learning using different methods and activities, various traditional and electronic media, learning spaces covering contact and distance learning, and task-based learning modules that begin…

Workplace Literacy Programs: A Review of the Literature.

ERIC Educational Resources Information Center

Dunn-Rankin, Patricia; Beil, Drake

This literature review observes that (1) there is an increasing need for enhancing job literacy skills among workers; (2) workplace literacy programs cover both basic literacy and job-related technical training; (3) successful curricula use job-related tasks and materials; and (4) management needs to be heavily involved and committed if a program…

Basic Visual Merchandising. Second Edition. [Student's Manual and] Answer Book/Teacher's Guide.

ERIC Educational Resources Information Center

Luter, Robert R.

This student's manual that features content needed to do tasks related to visual merchandising is intended for students in co-op training stations and entry-level, master employee, and supervisory-level employees. It contains 13 assignments. Each assignment has questions covering specific information and also features activities in which students…

Trustee Essentials: A Handbook for Wisconsin Public Library Trustees.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This handbook for Trustees of the Wisconsin Public Library describes in detail the tasks involved in being a library trustee. The handbook comprises a number of "Trustee Essentials" that cover the basic essential information needed by Trustees, as well as sources of additional information. Contents include: The Trustee Job Description;…

Effects of a Short Strategy Training on Metacognitive Monitoring across the Life-Span

ERIC Educational Resources Information Center

von der Linden, Nicole; Löffler, Elisabeth; Schneider, Wolfgang

2015-01-01

The present study was conducted to explore the potential positive influence of a short strategy training on metacognitive monitoring competencies covering a life-span approach. Participants of four age groups (3rd-grade children, adolescents, younger and older adults) concluded a paired-associate learning task. Additionally, they gave delayed…

Re-Thinking Support: The Hidden School-to-Work Challenges for Individuals with Special Needs

ERIC Educational Resources Information Center

Nag, Sonali

2011-01-01

This paper examines the hidden challenges experienced by individuals with special needs during the transition years between school and work. An assessment framework is proposed that covers domains of difficulties, developmental tasks during the transition years, the matrix of support within the home-community-institutions ecosystems, and the…

PROJECTING LAND USE AND LAND COVER CHANGE FOR THE MID-ATLANTIC INTEGRATED ASSESSMENT (INTERNAL GRANT)

EPA Science Inventory

Land use change is arguably the primary driver that will impact ecological resources in the U.S. during the next 50 years. This task is developing methods to analyze potential land use changes that result from changes in human population growth, economics, public works, a...

Closing the Performance Gap; Results-Centered Employee Development.

ERIC Educational Resources Information Center

Kellogg, Marion S.

This is a handbook for those who get work done through other people; it concentrates on that part of their task which has to do with encouraging employees to develop abilities and attitudes which assure accomplishment. It presents principles and practices which apply to all employees. Chapters cover Employee Development: A Business "Must,"…

Judging Words by Their Covers and the Company They Keep: Probabilistic Cues Support Word Learning

ERIC Educational Resources Information Center

Lany, Jill

2014-01-01

Statistical learning may be central to lexical and grammatical development. The phonological and distributional properties of words provide probabilistic cues to their grammatical and semantic properties. Infants can capitalize on such probabilistic cues to learn grammatical patterns in listening tasks. However, infants often struggle to learn…

Comparative Effectiveness and Student Choice for Online and Face-to-Face Classwork

ERIC Educational Resources Information Center

Nemetz, Patricia Louise; Eager, Wendy M.; Limpaphayom, Wanthanee

2017-01-01

The authors examined learning and task choices made by students when the same interactive course design was used online and face-to-face. A survey was administered in an operations management course covering both conceptual and quantitative topics. Course grades were compared and correlations were measured to determine relevant relationships.…

[Operation/Maintenance of Fiber Placement Machine

NASA Technical Reports Server (NTRS)

Pelham, L.; Dillard, T.

2000-01-01

NASA contract NAS8-39749 was completed in January 2000. The contract period of performance covered six (6) years and included basic program technical support as required by NASA with up to thirty (30) different technical directives identified and issued by NASA for specific Advanced Composite Technology tasks during the course of the contract.

The extraction of bitumen from western oil sands. Annual report, July 1991--July 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oblad, A.G.; Bunger, J.W.; Dahlstrom, D.A.

1992-08-01

The University of Utah tar sand research and development program is concerned with research and development on Utah is extensive oil sands deposits. The program has been intended to develop a scientific and technological base required for eventual commercial recovery of the heavy oils from oil sands and processing these oils to produce synthetic crude oil and other products such as asphalt. The overall program is based on mining the oil sand, processing the mined sand to recover the heavy oils and upgrading them to products. Multiple deposits are being investigated since it is believed that a large scale (approximatelymore » 20,000 bbl/day) plant would require the use of resources from more than one deposit. The tasks or projects in the program are organized according to the following classification: Recovery technologies which includes thermal recovery methods, water extraction methods, and solvent extraction methods; upgrading and processing technologies which covers hydrotreating, hydrocracking, and hydropyrolysis; solvent extraction; production of specialty products; and environmental aspects of the production and processing technologies. These tasks are covered in this report.« less

Dispersant Effectiveness, In-Situ Droplet Size Distribution and ...

EPA Pesticide Factsheets

This report summarizes two projects covered under an Interagency Agreement between the Bureau of Safety and Environmental Enforcement (BSEE) and the U.S. Environmental Protection Agency (EPA) in collaboration with the Bedford Institute of Oceanography, Department of Fisheries and Oceans Canada (BIO DFO), New Jersey Institute of Technology (NJIT) and Dalhousie University. Both projects dovetail together in addressing the ability to differentiate physical from chemical dispersion effectiveness using dispersed oil simulations within a flume tank for improving forensic response monitoring tools. This report is split into separateTasks based upon the two projects funded by BSEE: 1) Dispersant Effectiveness, In-Situ Droplet Size Distribution and Numerical Modeling to Assess Subsurface Dispersant Injection as a Deepwater Blowout Oil Spill Response Option. 2) Evaluation of Oil Fluorescence Characteristics to Improve Forensic Response Tools. This report summarizes 2 collaborative projects funded through an Interagency Agreement with DOI BSEE and a Cooperative Agreement with DFO Canada. BSEE required that the projects be combined into one report as they are both covered under the one Interagency Agreement. Task B (Fluorescence of oils) is an SHC 3.62 FY16 product.

Dexterity: A MATLAB-based analysis software suite for processing and visualizing data from tasks that measure arm or forelimb function.

PubMed

Butensky, Samuel D; Sloan, Andrew P; Meyers, Eric; Carmel, Jason B

2017-07-15

Hand function is critical for independence, and neurological injury often impairs dexterity. To measure hand function in people or forelimb function in animals, sensors are employed to quantify manipulation. These sensors make assessment easier and more quantitative and allow automation of these tasks. While automated tasks improve objectivity and throughput, they also produce large amounts of data that can be burdensome to analyze. We created software called Dexterity that simplifies data analysis of automated reaching tasks. Dexterity is MATLAB software that enables quick analysis of data from forelimb tasks. Through a graphical user interface, files are loaded and data are identified and analyzed. These data can be annotated or graphed directly. Analysis is saved, and the graph and corresponding data can be exported. For additional analysis, Dexterity provides access to custom scripts created by other users. To determine the utility of Dexterity, we performed a study to evaluate the effects of task difficulty on the degree of impairment after injury. Dexterity analyzed two months of data and allowed new users to annotate the experiment, visualize results, and save and export data easily. Previous analysis of tasks was performed with custom data analysis, requiring expertise with analysis software. Dexterity made the tools required to analyze, visualize and annotate data easy to use by investigators without data science experience. Dexterity increases accessibility to automated tasks that measure dexterity by making analysis of large data intuitive, robust, and efficient. Copyright © 2017 Elsevier B.V. All rights reserved.

Gait assessment in mild cognitive impairment and Alzheimer's disease: the effect of dual-task challenges across the cognitive spectrum.

PubMed

Muir, Susan W; Speechley, Mark; Wells, Jennie; Borrie, Michael; Gopaul, Karen; Montero-Odasso, Manuel

2012-01-01

Gait impairment is a prominent falls risk factor and a prevalent feature among older adults with cognitive impairment. However, there is a lack of comparative studies on gait performance and fall risk covering the continuum from normal cognition through mild cognitive impairment (MCI) to Alzheimer's disease (AD). We evaluated gait performance and the response to dual-task challenges in older adults with AD, MCI and normal cognition without a history of falls. We hypothesized that, in older people without history of falls, gait performance will deteriorate across the cognitive spectrum with changes being more evident under dual-tasking. Gait was assessed using an electronic walkway under single and three dual-tasks conditions. Gait velocity and stride time variability were not significantly different between the three groups under the single-task condition. By contrast, significant differences of decreasing velocity (p<0.0001), increasing stride time (p=0.0057) and increasing stride time variability (p=0.0037) were found under dual-task testing for people with MCI and AD. Less automatic and more complex dual-task tests, such as naming animals and serial subtraction by sevens from 100, created the greatest deterioration of gait performance. Gait changes under dual-tasking for the MCI and AD groups were statistically different from the cognitively normal controls. Dual-task assessment exposed gait impairments not obvious under a single-task test condition and may facilitate falls risk identification in cognitively impaired persons without a history of falls. Copyright © 2011 Elsevier B.V. All rights reserved.

Flat-plate solar array project. Volume 3: Silicon sheet: Wafers and ribbons

NASA Technical Reports Server (NTRS)

Briglio, A.; Dumas, K.; Leipold, M.; Morrison, A.

1986-01-01

The primary objective of the Silicon Sheet Task of the Flat-Plate Solar Array (FSA) Project was the development of one or more low cost technologies for producing silicon sheet suitable for processing into cost-competitive solar cells. Silicon sheet refers to high purity crystalline silicon of size and thickness for fabrication into solar cells. Areas covered in the project were ingot growth and casting, wafering, ribbon growth, and other sheet technologies. The task made and fostered significant improvements in silicon sheet including processing of both ingot and ribbon technologies. An additional important outcome was the vastly improved understanding of the characteristics associated with high quality sheet, and the control of the parameters required for higher efficiency solar cells. Although significant sheet cost reductions were made, the technology advancements required to meet the task cost goals were not achieved.

The Use of Cognitive Task Analysis and Simulators for After Action Review of Medical Events in Iraq

DTIC Science & Technology

2007-03-01

research attempts to improve medical AAR with a novel combination of Cognitive Task Analysis (CTA) conducted while interviewees moulage simulators...combination of medical Cognitive Task Analysis combined with the moulage of instruments and depictions of the femoral artery will more accurately

Hierarchical Task Analysis and Training Decisions.

ERIC Educational Resources Information Center

Shepherd, A.

1985-01-01

Hierarchical task analysis (HTA), which requires description of a task in terms of a hierarchy of operations and plans, is reviewed and examined as a basis for making training decisions. Benefits of HTA in terms of economy of analysis and as a means of accounting for complex performance are outlined. (Author/MBR)

Claretian Medical Center Task Analysis. Worker Education Program.

ERIC Educational Resources Information Center

Union of Needletrades, Industrial and Textile Employees.

This task analysis for positions at the Claretian Medical Center in southeast Chicago was developed to improve communication and customer service in the workplace. The task analysis was prepared through clinic tours, employee interviews, and supervisor questionnaires. It is used for the purpose of curriculum development for onsite instruction in…

Analysis of Human Communication during Assembly Tasks.

DTIC Science & Technology

1986-06-01

AD-A7l 43 ANALYSIS OF HUMAN COMMUNICATION DURING ASSEMBLY TASKS in1(U) CRNEGIE-MELLO UNIY PITTSBURGH PA ROBOTICS INST UNCLSSIIEDK S BARBER ET AL...ao I Dur~~~~IngAbcbyTs; 7c .S:in i lSAo .0. Analysis of Human Communication During Assembly Tasks K. Suzanne Barber and Gerald J. Agin CMU-RI-TR-86-1...TYPE or REPORT & PE-Rioo CevCZaz Analysis of Human Communication During Assembly Inlterim Tasks I . PERFORMING 00RG. REPORT NUMBER 1. £UT~oOR~e) IL

Potential for protein surface shape analysis using spherical harmonics and 3D Zernike descriptors.

PubMed

Venkatraman, Vishwesh; Sael, Lee; Kihara, Daisuke

2009-01-01

With structure databases expanding at a rapid rate, the task at hand is to provide reliable clues to their molecular function and to be able to do so on a large scale. This, however, requires suitable encodings of the molecular structure which are amenable to fast screening. To this end, moment-based representations provide a compact and nonredundant description of molecular shape and other associated properties. In this article, we present an overview of some commonly used representations with specific focus on two schemes namely spherical harmonics and their extension, the 3D Zernike descriptors. Key features and differences of the two are reviewed and selected applications are highlighted. We further discuss recent advances covering aspects of shape and property-based comparison at both global and local levels and demonstrate their applicability through some of our studies.

Across-task priming revisited: response and task conflicts disentangled using ex-Gaussian distribution analysis.

PubMed

Moutsopoulou, Karolina; Waszak, Florian

2012-04-01

The differential effects of task and response conflict in priming paradigms where associations are strengthened between a stimulus, a task, and a response have been demonstrated in recent years with neuroimaging methods. However, such effects are not easily disentangled with only measurements of behavior, such as reaction times (RTs). Here, we report the application of ex-Gaussian distribution analysis on task-switching RT data and show that conflict related to stimulus-response associations retrieved after a switch of tasks is reflected in the Gaussian component. By contrast, conflict related to the retrieval of stimulus-task associations is reflected in the exponential component. Our data confirm that the retrieval of stimulus-task and -response associations affects behavior differently. Ex-Gaussian distribution analysis is a useful tool for pulling apart these different levels of associative priming that are not distinguishable in analyses of RT means.

Do tasks make a difference? Accounting for heterogeneity of performance of children with reading difficulties on tasks of executive function: findings from a meta-analysis.

PubMed

Booth, Josephine N; Boyle, James M E; Kelly, Steve W

2010-03-01

Research studies have implicated executive functions in reading difficulties (RD). But while some studies have found children with RD to be impaired on tasks of executive function other studies report unimpaired performance. A meta-analysis was carried out to determine whether these discrepant findings can be accounted for by differences in the tasks of executive function that are utilized. A total of 48 studies comparing the performance on tasks of executive function of children with RD with their typically developing peers were included in the meta-analysis, yielding 180 effect sizes. An overall effect size of 0.57 (SE .03) was obtained, indicating that children with RD have impairments on tasks of executive function. However, effect sizes varied considerably suggesting that the impairment is not uniform. Moderator analysis revealed that task modality and IQ-achievement discrepancy definitions of RD influenced the magnitude of effect; however, the age and gender of participants and the nature of the RD did not have an influence. While the children's RD were associated with executive function impairments, variation in effect size is a product of the assessment task employed, underlying task demands, and definitional criteria.

Heuristic Task Analysis on E-Learning Course Development: A Formative Research Study

ERIC Educational Resources Information Center

Lee, Ji-Yeon; Reigeluth, Charles M.

2009-01-01

Utilizing heuristic task analysis (HTA), a method developed for eliciting, analyzing, and representing expertise in complex cognitive tasks, a formative research study was conducted on the task of e-learning course development to further improve the HTA process. Three instructional designers from three different post-secondary institutions in the…

Agricultural Production: Task Analysis for Livestock Production. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

This task analysis guide is intended to help teachers and administrators develop instructional materials and implement competency-based education in the agricultural production program. Section 1 contains a validated task inventory for the livestock production portion of agricultural production IV and V. Tasks are divided into six duty areas:…

An expert system shell for inferring vegetation characteristics: Implementation of additional techniques (task E)

NASA Technical Reports Server (NTRS)

Harrison, P. Ann

1992-01-01

The NASA VEGetation Workbench (VEG) is a knowledge based system that infers vegetation characteristics from reflectance data. The VEG subgoal PROPORTION.GROUND.COVER has been completed and a number of additional techniques that infer the proportion ground cover of a sample have been implemented. Some techniques operate on sample data at a single wavelength. The techniques previously incorporated in VEG for other subgoals operated on data at a single wavelength so implementing the additional single wavelength techniques required no changes to the structure of VEG. Two techniques which use data at multiple wavelengths to infer proportion ground cover were also implemented. This work involved modifying the structure of VEG so that multiple wavelength techniques could be incorporated. All the new techniques were tested using both the VEG 'Research Mode' and the 'Automatic Mode.'

Walking Stroop carpet: an innovative dual-task concept for detecting cognitive impairment.

PubMed

Perrochon, A; Kemoun, G; Watelain, E; Berthoz, A

2013-01-01

Several studies have reported the potential value of the dual-task concept during locomotion in clinical evaluation because cognitive decline is strongly associated with gait abnormalities. However, current dual-task tests appear to be insufficient for early diagnosis of cognitive impairment. Forty-nine subjects (young, old, with or without mild cognitive impairment) underwent cognitive evaluation (Mini-Mental State Examination, Frontal Assessment Battery, five-word test, Stroop, clock-drawing) and single-task locomotor evaluation on an electronic walkway. They were then dual-task-tested on the Walking Stroop carpet, which is an adaptation of the Stroop color-word task for locomotion. A cluster analysis, followed by an analysis of variance, was performed to assess gait parameters. Cluster analysis of gait parameters on the Walking Stroop carpet revealed an interaction between cognitive and functional abilities because it made it possible to distinguish dysexecutive cognitive fragility or decline with a sensitivity of 89% and a specificity of 94%. Locomotor abilities differed according to the group and dual-task conditions. Healthy subjects performed less well on dual-tasking under reading conditions than when they were asked to distinguish colors, whereas dysexecutive subjects had worse motor performances when they were required to dual task. The Walking Stroop carpet is a dual-task test that enables early detection of cognitive fragility that has not been revealed by traditional neuropsychological tests or single-task walking analysis.

Walking Stroop carpet: an innovative dual-task concept for detecting cognitive impairment

PubMed Central

Perrochon, A; Kemoun, G; Watelain, E; Berthoz, A

2013-01-01

Background Several studies have reported the potential value of the dual-task concept during locomotion in clinical evaluation because cognitive decline is strongly associated with gait abnormalities. However, current dual-task tests appear to be insufficient for early diagnosis of cognitive impairment. Methods Forty-nine subjects (young, old, with or without mild cognitive impairment) underwent cognitive evaluation (Mini-Mental State Examination, Frontal Assessment Battery, five-word test, Stroop, clock-drawing) and single-task locomotor evaluation on an electronic walkway. They were then dual-task-tested on the Walking Stroop carpet, which is an adaptation of the Stroop color–word task for locomotion. A cluster analysis, followed by an analysis of variance, was performed to assess gait parameters. Results Cluster analysis of gait parameters on the Walking Stroop carpet revealed an interaction between cognitive and functional abilities because it made it possible to distinguish dysexecutive cognitive fragility or decline with a sensitivity of 89% and a specificity of 94%. Locomotor abilities differed according to the group and dual-task conditions. Healthy subjects performed less well on dual-tasking under reading conditions than when they were asked to distinguish colors, whereas dysexecutive subjects had worse motor performances when they were required to dual task. Conclusion The Walking Stroop carpet is a dual-task test that enables early detection of cognitive fragility that has not been revealed by traditional neuropsychological tests or single-task walking analysis. PMID:23682211

BioNLP Shared Task--The Bacteria Track.

PubMed

Bossy, Robert; Jourde, Julien; Manine, Alain-Pierre; Veber, Philippe; Alphonse, Erick; van de Guchte, Maarten; Bessières, Philippe; Nédellec, Claire

2012-06-26

We present the BioNLP 2011 Shared Task Bacteria Track, the first Information Extraction challenge entirely dedicated to bacteria. It includes three tasks that cover different levels of biological knowledge. The Bacteria Gene Renaming supporting task is aimed at extracting gene renaming and gene name synonymy in PubMed abstracts. The Bacteria Gene Interaction is a gene/protein interaction extraction task from individual sentences. The interactions have been categorized into ten different sub-types, thus giving a detailed account of genetic regulations at the molecular level. Finally, the Bacteria Biotopes task focuses on the localization and environment of bacteria mentioned in textbook articles. We describe the process of creation for the three corpora, including document acquisition and manual annotation, as well as the metrics used to evaluate the participants' submissions. Three teams submitted to the Bacteria Gene Renaming task; the best team achieved an F-score of 87%. For the Bacteria Gene Interaction task, the only participant's score had reached a global F-score of 77%, although the system efficiency varies significantly from one sub-type to another. Three teams submitted to the Bacteria Biotopes task with very different approaches; the best team achieved an F-score of 45%. However, the detailed study of the participating systems efficiency reveals the strengths and weaknesses of each participating system. The three tasks of the Bacteria Track offer participants a chance to address a wide range of issues in Information Extraction, including entity recognition, semantic typing and coreference resolution. We found common trends in the most efficient systems: the systematic use of syntactic dependencies and machine learning. Nevertheless, the originality of the Bacteria Biotopes task encouraged the use of interesting novel methods and techniques, such as term compositionality, scopes wider than the sentence.

MODSNOW-Tool: an operational tool for daily snow cover monitoring using MODIS data

NASA Astrophysics Data System (ADS)

Gafurov, Abror; Lüdtke, Stefan; Unger-Shayesteh, Katy; Vorogushyn, Sergiy; Schöne, Tilo; Schmidt, Sebastian; Kalashnikova, Olga; Merz, Bruno

2017-04-01

Spatially distributed snow cover information in mountain areas is extremely important for water storage estimations, seasonal water availability forecasting, or the assessment of snow-related hazards (e.g. enhanced snow-melt following intensive rains, or avalanche events). Moreover, spatially distributed snow cover information can be used to calibrate and/or validate hydrological models. We present the MODSNOW-Tool - an operational monitoring tool offers a user-friendly application which can be used for catchment-based operational snow cover monitoring. The application automatically downloads and processes freely available daily Moderate Resolution Imaging Spectroradiometer (MODIS) snow cover data. The MODSNOW-Tool uses a step-wise approach for cloud removal and delivers cloud-free snow cover maps for the selected river basins including basin specific snow cover extent statistics. The accuracy of cloud-eliminated MODSNOW snow cover maps was validated for 84 almost cloud-free days in the Karadarya river basin in Central Asia, and an average accuracy of 94 % was achieved. The MODSNOW-Tool can be used in operational and non-operational mode. In the operational mode, the tool is set up as a scheduled task on a local computer allowing automatic execution without user interaction and delivers snow cover maps on a daily basis. In the non-operational mode, the tool can be used to process historical time series of snow cover maps. The MODSNOW-Tool is currently implemented and in use at the national hydrometeorological services of four Central Asian states - Kazakhstan, Kyrgyzstan, Uzbekistan and Turkmenistan and used for seasonal water availability forecast.

Completion of the National Land Cover Database (NLCD) 1992–2001 Land Cover Change Retrofit product

USGS Publications Warehouse

Fry, J.A.; Coan, Michael; Homer, Collin G.; Meyer, Debra K.; Wickham, J.D.

2009-01-01

The Multi-Resolution Land Characteristics Consortium has supported the development of two national digital land cover products: the National Land Cover Dataset (NLCD) 1992 and National Land Cover Database (NLCD) 2001. Substantial differences in imagery, legends, and methods between these two land cover products must be overcome in order to support direct comparison. The NLCD 1992-2001 Land Cover Change Retrofit product was developed to provide more accurate and useful land cover change data than would be possible by direct comparison of NLCD 1992 and NLCD 2001. For the change analysis method to be both national in scale and timely, implementation required production across many Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) path/rows simultaneously. To meet these requirements, a hybrid change analysis process was developed to incorporate both post-classification comparison and specialized ratio differencing change analysis techniques. At a resolution of 30 meters, the completed NLCD 1992-2001 Land Cover Change Retrofit product contains unchanged pixels from the NLCD 2001 land cover dataset that have been cross-walked to a modified Anderson Level I class code, and changed pixels labeled with a 'from-to' class code. Analysis of the results for the conterminous United States indicated that about 3 percent of the land cover dataset changed between 1992 and 2001.

A framework for characterizing eHealth literacy demands and barriers.

PubMed

Chan, Connie V; Kaufman, David R

2011-11-17

Consumer eHealth interventions are of a growing importance in the individual management of health and health behaviors. However, a range of access, resources, and skills barriers prevent health care consumers from fully engaging in and benefiting from the spectrum of eHealth interventions. Consumers may engage in a range of eHealth tasks, such as participating in health discussion forums and entering information into a personal health record. eHealth literacy names a set of skills and knowledge that are essential for productive interactions with technology-based health tools, such as proficiency in information retrieval strategies, and communicating health concepts effectively. We propose a theoretical and methodological framework for characterizing complexity of eHealth tasks, which can be used to diagnose and describe literacy barriers and inform the development of solution strategies. We adapted and integrated two existing theoretical models relevant to the analysis of eHealth literacy into a single framework to systematically categorize and describe task demands and user performance on tasks needed by health care consumers in the information age. The method derived from the framework is applied to (1) code task demands using a cognitive task analysis, and (2) code user performance on tasks. The framework and method are applied to the analysis of a Web-based consumer eHealth task with information-seeking and decision-making demands. We present the results from the in-depth analysis of the task performance of a single user as well as of 20 users on the same task to illustrate both the detailed analysis and the aggregate measures obtained and potential analyses that can be performed using this method. The analysis shows that the framework can be used to classify task demands as well as the barriers encountered in user performance of the tasks. Our approach can be used to (1) characterize the challenges confronted by participants in performing the tasks, (2) determine the extent to which application of the framework to the cognitive task analysis can predict and explain the problems encountered by participants, and (3) inform revisions to the framework to increase accuracy of predictions. The results of this illustrative application suggest that the framework is useful for characterizing task complexity and for diagnosing and explaining barriers encountered in task completion. The framework and analytic approach can be a potentially powerful generative research platform to inform development of rigorous eHealth examination and design instruments, such as to assess eHealth competence, to design and evaluate consumer eHealth tools, and to develop an eHealth curriculum.

A Framework for Characterizing eHealth Literacy Demands and Barriers

PubMed Central

Chan, Connie V

2011-01-01

Background Consumer eHealth interventions are of a growing importance in the individual management of health and health behaviors. However, a range of access, resources, and skills barriers prevent health care consumers from fully engaging in and benefiting from the spectrum of eHealth interventions. Consumers may engage in a range of eHealth tasks, such as participating in health discussion forums and entering information into a personal health record. eHealth literacy names a set of skills and knowledge that are essential for productive interactions with technology-based health tools, such as proficiency in information retrieval strategies, and communicating health concepts effectively. Objective We propose a theoretical and methodological framework for characterizing complexity of eHealth tasks, which can be used to diagnose and describe literacy barriers and inform the development of solution strategies. Methods We adapted and integrated two existing theoretical models relevant to the analysis of eHealth literacy into a single framework to systematically categorize and describe task demands and user performance on tasks needed by health care consumers in the information age. The method derived from the framework is applied to (1) code task demands using a cognitive task analysis, and (2) code user performance on tasks. The framework and method are applied to the analysis of a Web-based consumer eHealth task with information-seeking and decision-making demands. We present the results from the in-depth analysis of the task performance of a single user as well as of 20 users on the same task to illustrate both the detailed analysis and the aggregate measures obtained and potential analyses that can be performed using this method. Results The analysis shows that the framework can be used to classify task demands as well as the barriers encountered in user performance of the tasks. Our approach can be used to (1) characterize the challenges confronted by participants in performing the tasks, (2) determine the extent to which application of the framework to the cognitive task analysis can predict and explain the problems encountered by participants, and (3) inform revisions to the framework to increase accuracy of predictions. Conclusions The results of this illustrative application suggest that the framework is useful for characterizing task complexity and for diagnosing and explaining barriers encountered in task completion. The framework and analytic approach can be a potentially powerful generative research platform to inform development of rigorous eHealth examination and design instruments, such as to assess eHealth competence, to design and evaluate consumer eHealth tools, and to develop an eHealth curriculum. PMID:22094891

Light Water Reactor Sustainability Program A Reference Plan for Control Room Modernization: Planning and Analysis Phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacques Hugo; Ronald Boring; Lew Hanes

2013-09-01

The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program is collaborating with a U.S. nuclear utility to bring about a systematic fleet-wide control room modernization. To facilitate this upgrade, a new distributed control system (DCS) is being introduced into the control rooms of these plants. The DCS will upgrade the legacy plant process computer and emergency response facility information system. In addition, the DCS will replace an existing analog turbine control system with a display-based system. With technology upgrades comes the opportunity to improve the overall human-system interaction between the operators and the control room. To optimize operatormore » performance, the LWRS Control Room Modernization research team followed a human-centered approach published by the U.S. Nuclear Regulatory Commission. NUREG-0711, Rev. 3, Human Factors Engineering Program Review Model (O’Hara et al., 2012), prescribes four phases for human factors engineering. This report provides examples of the first phase, Planning and Analysis. The three elements of Planning and Analysis in NUREG-0711 that are most crucial to initiating control room upgrades are: • Operating Experience Review: Identifies opportunities for improvement in the existing system and provides lessons learned from implemented systems. • Function Analysis and Allocation: Identifies which functions at the plant may be optimally handled by the DCS vs. the operators. • Task Analysis: Identifies how tasks might be optimized for the operators. Each of these elements is covered in a separate chapter. Examples are drawn from workshops with reactor operators that were conducted at the LWRS Human System Simulation Laboratory HSSL and at the respective plants. The findings in this report represent generalized accounts of more detailed proprietary reports produced for the utility for each plant. The goal of this LWRS report is to disseminate the technique and provide examples sufficient to serve as a template for other utilities’ projects for control room modernization.« less

Evaluation of Robotic Systems to Carry Out Traverse Execution, Opportunistic Science, and Landing Site Evaluation Tasks

NASA Technical Reports Server (NTRS)

Hoffman, Stephen J.; Leonard, Matther J.; Pacal, Lee

2011-01-01

This report covers the execution of and results from the activities proposed and approved in Exploration Analogs and Mission Development (EAMD) Field Test Protocol HMP2010: Evaluation of Robotic Systems to carry out Traverse Execution, Opportunistic Science, and Landing Site Evaluation Tasks. The field tests documented in this report examine one facet of a larger program of planetary surface exploration. This program has been evolving and maturing for several years, growing from a broad policy statement with a few specified milestones for NASA to an international effort with much higher fidelity descriptions of systems and operations necessary to accomplish this type of exploration.

Task Order 20: Supercritical Carbon Dioxide Brayton Cycle Energy Conversion Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, Paul; Lindsay, Edward; McDowell, Michael

2015-04-23

AREVA Inc. developed this study for the US Department of Energy (DOE) office of Nuclear Energy (NE) in accordance with Task Order 20 Statement of Work (SOW) covering research and development activities for the Supercritical Carbon Dioxide (sCO2) Brayton Cycle energy conversion. The study addresses the conversion of sCO2 heat energy to electrical output by use of a Brayton Cycle system and focuses on the potential of a net efficiency increase via cycle recuperation and recompression stages. The study also addresses issues and study needed to advance development and implementation of a 10 MWe sCO2 demonstration project.

A Health Economics Approach to US Value Assessment Frameworks-Summary and Recommendations of the ISPOR Special Task Force Report [7].

PubMed

Garrison, Louis P; Neumann, Peter J; Willke, Richard J; Basu, Anirban; Danzon, Patricia M; Doshi, Jalpa A; Drummond, Michael F; Lakdawalla, Darius N; Pauly, Mark V; Phelps, Charles E; Ramsey, Scott D; Towse, Adrian; Weinstein, Milton C

2018-02-01

This summary section first lists key points from each of the six sections of the report, followed by six key recommendations. The Special Task Force chose to take a health economics approach to the question of whether a health plan should cover and reimburse a specific technology, beginning with the view that the conventional cost-per-quality-adjusted life-year metric has both strengths as a starting point and recognized limitations. This report calls for the development of a more comprehensive economic evaluation that could include novel elements of value (e.g., insurance value and equity) as part of either an "augmented" cost-effectiveness analysis or a multicriteria decision analysis. Given an aggregation of elements to a measure of value, consistent use of a cost-effectiveness threshold can help ensure the maximization of health gain and well-being for a given budget. These decisions can benefit from the use of deliberative processes. The six recommendations are to: 1) be explicit about decision context and perspective in value assessment frameworks; 2) base health plan coverage and reimbursement decisions on an evaluation of the incremental costs and benefits of health care technologies as is provided by cost-effectiveness analysis; 3) develop value thresholds to serve as one important input to help guide coverage and reimbursement decisions; 4) manage budget constraints and affordability on the basis of cost-effectiveness principles; 5) test and consider using structured deliberative processes for health plan coverage and reimbursement decisions; and 6) explore and test novel elements of benefit to improve value measures that reflect the perspectives of both plan members and patients. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The effect of new technologies in the training and utilization of dental auxiliaries in the US armed forces--Navy.

PubMed

Pebley, H C

1976-06-01

The dental health care requirements of Navy and Marine Corps personnel exceed the treatment capabilities of the Navy Dental Corps. Through the effective training and efficient utilization of the various categories of auxiliaries, members of the naval service have all essential care completed. The staff of the Dental Technicians School has developed a task-based/self-paced curriculum for the basic dental assisting course. In the task-based curriculum instruction is limited to the psychomotor domain. Background knowledge from the cognitive domain is included only to the extent that the information is needed to perform designated tasks. There are 229 tasks in the inventory of the 12 week basic dental assisting course. These are organized into 17 instructional modules covering all aspects of chairside dental assisting. Student evaluation is based on demonstrated performance of the tasks and is graded on a pass/fail standard. The new curriculum is believed to be unique in dental auxiliary education. Because of the highly successful results in improving the quality of graduates, the positive student enthusiasm and acceptance of task-based instruction and the overall revitalization of every dimension of the basic dental assistant training program, development teams have begun to convert the other three courses of instruction conducted at the Dental Technicians School to the task-based curriculum format.

SRM Internal Flow Test and Computational Fluid Dynamic Analysis. Volume 1; Major Task Summaries

NASA Technical Reports Server (NTRS)

Whitesides, R. Harold; Dill, Richard A.; Purinton, David C.

1995-01-01

During the four year period of performance for NASA contract, NASB-39095, ERC has performed a wide variety of tasks to support the design and continued development of new and existing solid rocket motors and the resolution of operational problems associated with existing solid rocket motor's at NASA MSFC. This report summarizes the support provided to NASA MSFC during the contractual period of performance. The report is divided into three main sections. The first section presents summaries for the major tasks performed. These tasks are grouped into three major categories: full scale motor analysis, subscale motor analysis and cold flow analysis. The second section includes summaries describing the computational fluid dynamics (CFD) tasks performed. The third section, the appendices of the report, presents detailed descriptions of the analysis efforts as well as published papers, memoranda and final reports associated with specific tasks. These appendices are referenced in the summaries. The subsection numbers for the three sections correspond to the same topics for direct cross referencing.

Old stones' song: use-wear experiments and analysis of the Oldowan quartz and quartzite assemblage from Kanjera South (Kenya).

PubMed

Lemorini, Cristina; Plummer, Thomas W; Braun, David R; Crittenden, Alyssa N; Ditchfield, Peter W; Bishop, Laura C; Hertel, Fritz; Oliver, James S; Marlowe, Frank W; Schoeninger, Margaret J; Potts, Richard

2014-07-01

Evidence of Oldowan tools by ∼2.6 million years ago (Ma) may signal a major adaptive shift in hominin evolution. While tool-dependent butchery of large mammals was important by at least 2.0 Ma, the use of artifacts for tasks other than faunal processing has been difficult to diagnose. Here we report on use-wear analysis of ∼2.0 Ma quartz and quartzite artifacts from Kanjera South, Kenya. A use-wear framework that links processing of specific materials and tool motions to their resultant use-wear patterns was developed. A blind test was then carried out to assess and improve the efficacy of this experimental use-wear framework, which was then applied to the analysis of 62 Oldowan artifacts from Kanjera South. Use-wear on a total of 23 artifact edges was attributed to the processing of specific materials. Use-wear on seven edges (30%) was attributed to animal tissue processing, corroborating zooarchaeological evidence for butchery at the site. Use-wear on 16 edges (70%) was attributed to the processing of plant tissues, including wood, grit-covered plant tissues that we interpret as underground storage organs (USOs), and stems of grass or sedges. These results expand our knowledge of the suite of behaviours carried out in the vicinity of Kanjera South to include the processing of materials that would be 'invisible' using standard archaeological methods. Wood cutting and scraping may represent the production and/or maintenance of wooden tools. Use-wear related to USO processing extends the archaeological evidence for hominin acquisition and consumption of this resource by over 1.5 Ma. Cutting of grasses, sedges or reeds may be related to a subsistence task (e.g., grass seed harvesting, cutting out papyrus culm for consumption) and/or a non-subsistence related task (e.g., production of 'twine,' simple carrying devices, or bedding). These results highlight the adaptive significance of lithic technology for hominins at Kanjera. Copyright © 2014 Elsevier Ltd. All rights reserved.

The structure of the EU mediasphere.

PubMed

Flaounas, Ilias; Turchi, Marco; Ali, Omar; Fyson, Nick; De Bie, Tijl; Mosdell, Nick; Lewis, Justin; Cristianini, Nello

2010-12-08

A trend towards automation of scientific research has recently resulted in what has been termed "data-driven inquiry" in various disciplines, including physics and biology. The automation of many tasks has been identified as a possible future also for the humanities and the social sciences, particularly in those disciplines concerned with the analysis of text, due to the recent availability of millions of books and news articles in digital format. In the social sciences, the analysis of news media is done largely by hand and in a hypothesis-driven fashion: the scholar needs to formulate a very specific assumption about the patterns that might be in the data, and then set out to verify if they are present or not. In this study, we report what we think is the first large scale content-analysis of cross-linguistic text in the social sciences, by using various artificial intelligence techniques. We analyse 1.3 M news articles in 22 languages detecting a clear structure in the choice of stories covered by the various outlets. This is significantly affected by objective national, geographic, economic and cultural relations among outlets and countries, e.g., outlets from countries sharing strong economic ties are more likely to cover the same stories. We also show that the deviation from average content is significantly correlated with membership to the eurozone, as well as with the year of accession to the EU. While independently making a multitude of small editorial decisions, the leading media of the 27 EU countries, over a period of six months, shaped the contents of the EU mediasphere in a way that reflects its deep geographic, economic and cultural relations. Detecting these subtle signals in a statistically rigorous way would be out of the reach of traditional methods. This analysis demonstrates the power of the available methods for significant automation of media content analysis.

The Structure of the EU Mediasphere

PubMed Central

Flaounas, Ilias; Turchi, Marco; Ali, Omar; Fyson, Nick; De Bie, Tijl; Mosdell, Nick; Lewis, Justin; Cristianini, Nello

2010-01-01

Background A trend towards automation of scientific research has recently resulted in what has been termed “data-driven inquiry” in various disciplines, including physics and biology. The automation of many tasks has been identified as a possible future also for the humanities and the social sciences, particularly in those disciplines concerned with the analysis of text, due to the recent availability of millions of books and news articles in digital format. In the social sciences, the analysis of news media is done largely by hand and in a hypothesis-driven fashion: the scholar needs to formulate a very specific assumption about the patterns that might be in the data, and then set out to verify if they are present or not. Methodology/Principal Findings In this study, we report what we think is the first large scale content-analysis of cross-linguistic text in the social sciences, by using various artificial intelligence techniques. We analyse 1.3 M news articles in 22 languages detecting a clear structure in the choice of stories covered by the various outlets. This is significantly affected by objective national, geographic, economic and cultural relations among outlets and countries, e.g., outlets from countries sharing strong economic ties are more likely to cover the same stories. We also show that the deviation from average content is significantly correlated with membership to the eurozone, as well as with the year of accession to the EU. Conclusions/Significance While independently making a multitude of small editorial decisions, the leading media of the 27 EU countries, over a period of six months, shaped the contents of the EU mediasphere in a way that reflects its deep geographic, economic and cultural relations. Detecting these subtle signals in a statistically rigorous way would be out of the reach of traditional methods. This analysis demonstrates the power of the available methods for significant automation of media content analysis. PMID:21170383

Encapsulation task of the low-cost silicon solar array project. Investigation of test methods, material properties, and processes for solar cell encapsulants

NASA Technical Reports Server (NTRS)

Willis, P. B.; Baum, B.; White, R. A.

1978-01-01

The results of an investigation of solar module encapsulation systems applicable to the Low-Cost Solar Array Project 1986 cost and performance goals are presented. Six basic construction elements were identified and their specific uses in module construction defined. A uniform coating basis was established for each element. The survey results were also useful in revealing price ranges for classes of materials and estimating the cost allocation for each element within the encapsulating cost goal. The six construction elements were considered to be substrates, superstrates, pottants, adhesives, outer covers and back covers.

[Psychosomatic treatment of otorhinolaryngological diseases].

PubMed

Marek, A

2009-11-01

The spectrum of psychosomatic diseases in the field of otorhinolaryngology covers reactive disorders brought on by excessive psychosocial demands, post-traumatic disorders following mental traumatization, purely psychological disorders brought on by personality development deficits or learnt false behavior, and multifactorial diseases with somatic correlatives and mental triggers. Psychosomatic medicine describes the interaction of physical and psychological processes. The central treatment method is psychotherapy. In Germany, the costs of psychodynamic psychotherapies and behavioral therapy are covered by the health insurance companies. The tasks of psychosomatic treatment in the field of otorhinolaryngology comprise differential diagnostics, basic psychosomatic treatment and the determination of differential indications for the respective forms of psychotherapy.

The Use of Cognitive Task Analysis and Simulators for After Action Review of Medical Events in Iraq

DTIC Science & Technology

2006-12-01

research attempts to improve medical AAR with a novel combination of Cognitive Task Analysis conducted while interviewees moulage simulators (Clark and...hypothesized that our protocol which employed a novel combination of medical Cognitive Task Analysis combined with the moulage of instruments and depictions

Making Sense of Sensemaking: Requirements of a Cognitive Analysis to Support C2 Decision Support System Design

DTIC Science & Technology

2006-06-01

heart of a distinction within the CSE community with respect to the differences between Cognitive Task Analysis (CTA) and Cognitive Work Analysis...Wesley. Pirolli, P. and Card, S. (2005). The sensemaking process and leverage points for analyst technology as identified through cognitive task analysis . In...D. D., and Elm, W. C. (2000). Cognitive task analysis as bootstrapping multiple converging techniques. In Schraagen, Chipman, and Shalin (Eds

Space science education based on the usage of microsatellites

NASA Astrophysics Data System (ADS)

Zaitzev, A.; Boyrchuk, K.; Panasuk, M.; Krasotkin, S.; Radchenko, V.; Fateev, V.; Tereshkov, A.

Lomonosov Moscow State University, Institute of Terrestrial Magnetism, Ionosphere and Radio Wave Propagation and Mozhaisky Engineering Space Forces Academy together with collaborators are planning to launch two microsatellites - "Kompas-Tatyana" and "Universitetsky" in 2004. In the Skobeltsyn Institute of Nuclear Physics of Moscow University the team of educators and students was formed in order to develop and to test the space science education program. The program includes few directions. First, the curriculum materials which include all basic knowledge regarding the operation of satellites in outer space. There are cover the telecommunications, navigation, and physical conditions in outer space, the instruments and related subjects. Second stage of the program includes some practical works with real satellite data. When satellite telemetry received, the data must be processed and quick-look graphs constructed. The main task for students in the second stage is the approach to the analysis and the comparison with the data that already exist. They will solve the tasks how to infer some original results from raw data and how to the received data corresponds to the models of outer space. Third, after analysis the students are expected to prepare the written reports and display the results on the open lessons in the web-page formats. The practical realization of the educational program is planned for "Kompas-Tatyana" and "Universitetsky" satellites which will be launched in the end of 2004. It will carry out several scientific instruments with telemetry in the 137 Mhz open channel. Students will able to receive the "live" telemetry data. Such practice is rather exiting and motivates them to work hard with the program tasks. The simple receiving devices will allow to get some data in the high schools as well. Additional support for teachers and students will be provided via main server in the Internet. The pilot version of curriculum materials will be tested on the databases available from other space experiments and microsatellites. Such data bases already exist in Internet and have open public access.

Development and Application of a Multi-Modal Task Analysis to Support Intelligent Tutoring of Complex Skills

ERIC Educational Resources Information Center

Skinner, Anna; Diller, David; Kumar, Rohit; Cannon-Bowers, Jan; Smith, Roger; Tanaka, Alyssa; Julian, Danielle; Perez, Ray

2018-01-01

Background: Contemporary work in the design and development of intelligent training systems employs task analysis (TA) methods for gathering knowledge that is subsequently encoded into task models. These task models form the basis of intelligent interpretation of student performance within education and training systems. Also referred to as expert…

The Effects of Describing Antecedent Stimuli and Performance Criteria in Task Analysis Instruction for Graphing

ERIC Educational Resources Information Center

Tyner, Bryan C.; Fienup, Daniel M.

2016-01-01

Task analyses are ubiquitous to applied behavior analysis interventions, yet little is known about the factors that make them effective. Numerous task analyses have been published in behavior analytic journals for constructing single-subject design graphs; however, learner outcomes using these task analyses may fall short of what could be…

Combined analysis of job and task benzene air exposures among workers at four US refinery operations

PubMed Central

Shin, Jennifer (Mi); Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2016-01-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers’ exposures to benzene over the past 30 years. PMID:26862134

Combined analysis of job and task benzene air exposures among workers at four US refinery operations.

PubMed

Burns, Amanda; Shin, Jennifer Mi; Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2017-03-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers' exposures to benzene over the past 30 years.

Next Generation Electromagnetic Pump Analysis Tools (PLM DOC-0005-2188). Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stregy, Seth; Dasilva, Ana; Yilmaz, Serkan

2015-10-29

This report provides the broad historical review of EM Pump development and details of MATRIX development under this project. This report summarizes the efforts made to modernize the legacy performance models used in previous EM Pump designs and the improvements made to the analysis tools. This report provides information on Tasks 1, 3, and 4 of the entire project. The research for Task 4 builds upon Task 1: Update EM Pump Databank and Task 3: Modernize the Existing EM Pump Analysis Model, which are summarized within this report. Where research for Task 2: Insulation Materials Development and Evaluation identified parametersmore » applicable to the analysis model with Task 4, the analysis code was updated, and analyses were made for additional materials. The important design variables for the manufacture and operation of an EM Pump that the model improvement can evaluate are: space constraints; voltage capability of insulation system; maximum flux density through iron; flow rate and outlet pressure; efficiency and manufacturability. The development of the next-generation EM Pump analysis tools during this two-year program provides information in three broad areas: Status of analysis model development; Improvements made to older simulations; and Comparison to experimental data.« less

Looking back to inform the future: The role of cognition in forest disturbance characterization from remote sensing imagery

NASA Astrophysics Data System (ADS)

Bianchetti, Raechel Anne

Remotely sensed images have become a ubiquitous part of our daily lives. From novice users, aiding in search and rescue missions using tools such as TomNod, to trained analysts, synthesizing disparate data to address complex problems like climate change, imagery has become central to geospatial problem solving. Expert image analysts are continually faced with rapidly developing sensor technologies and software systems. In response to these cognitively demanding environments, expert analysts develop specialized knowledge and analytic skills to address increasingly complex problems. This study identifies the knowledge, skills, and analytic goals of expert image analysts tasked with identification of land cover and land use change. Analysts participating in this research are currently working as part of a national level analysis of land use change, and are well versed with the use of TimeSync, forest science, and image analysis. The results of this study benefit current analysts as it improves their awareness of their mental processes used during the image interpretation process. The study also can be generalized to understand the types of knowledge and visual cues that analysts use when reasoning with imagery for purposes beyond land use change studies. Here a Cognitive Task Analysis framework is used to organize evidence from qualitative knowledge elicitation methods for characterizing the cognitive aspects of the TimeSync image analysis process. Using a combination of content analysis, diagramming, semi-structured interviews, and observation, the study highlights the perceptual and cognitive elements of expert remote sensing interpretation. Results show that image analysts perform several standard cognitive processes, but flexibly employ these processes in response to various contextual cues. Expert image analysts' ability to think flexibly during their analysis process was directly related to their amount of image analysis experience. Additionally, results show that the basic Image Interpretation Elements continue to be important despite technological augmentation of the interpretation process. These results are used to derive a set of design guidelines for developing geovisual analytic tools and training to support image analysis.

Assessment of Atmospheric Algorithms to Retrieve Vegetation in Natural Protected Areas Using Multispectral High Resolution Imagery

PubMed Central

Marcello, Javier; Eugenio, Francisco; Perdomo, Ulises; Medina, Anabella

2016-01-01

The precise mapping of vegetation covers in semi-arid areas is a complex task as this type of environment consists of sparse vegetation mainly composed of small shrubs. The launch of high resolution satellites, with additional spectral bands and the ability to alter the viewing angle, offers a useful technology to focus on this objective. In this context, atmospheric correction is a fundamental step in the pre-processing of such remote sensing imagery and, consequently, different algorithms have been developed for this purpose over the years. They are commonly categorized as imaged-based methods as well as in more advanced physical models based on the radiative transfer theory. Despite the relevance of this topic, a few comparative studies covering several methods have been carried out using high resolution data or which are specifically applied to vegetation covers. In this work, the performance of five representative atmospheric correction algorithms (DOS, QUAC, FLAASH, ATCOR and 6S) has been assessed, using high resolution Worldview-2 imagery and field spectroradiometer data collected simultaneously, with the goal of identifying the most appropriate techniques. The study also included a detailed analysis of the parameterization influence on the final results of the correction, the aerosol model and its optical thickness being important parameters to be properly adjusted. The effects of corrections were studied in vegetation and soil sites belonging to different protected semi-arid ecosystems (high mountain and coastal areas). In summary, the superior performance of model-based algorithms, 6S in particular, has been demonstrated, achieving reflectance estimations very close to the in-situ measurements (RMSE of between 2% and 3%). Finally, an example of the importance of the atmospheric correction in the vegetation estimation in these natural areas is presented, allowing the robust mapping of species and the analysis of multitemporal variations related to the human activity and climate change. PMID:27706064

Assessment of Atmospheric Algorithms to Retrieve Vegetation in Natural Protected Areas Using Multispectral High Resolution Imagery.

PubMed

Marcello, Javier; Eugenio, Francisco; Perdomo, Ulises; Medina, Anabella

2016-09-30

The precise mapping of vegetation covers in semi-arid areas is a complex task as this type of environment consists of sparse vegetation mainly composed of small shrubs. The launch of high resolution satellites, with additional spectral bands and the ability to alter the viewing angle, offers a useful technology to focus on this objective. In this context, atmospheric correction is a fundamental step in the pre-processing of such remote sensing imagery and, consequently, different algorithms have been developed for this purpose over the years. They are commonly categorized as imaged-based methods as well as in more advanced physical models based on the radiative transfer theory. Despite the relevance of this topic, a few comparative studies covering several methods have been carried out using high resolution data or which are specifically applied to vegetation covers. In this work, the performance of five representative atmospheric correction algorithms (DOS, QUAC, FLAASH, ATCOR and 6S) has been assessed, using high resolution Worldview-2 imagery and field spectroradiometer data collected simultaneously, with the goal of identifying the most appropriate techniques. The study also included a detailed analysis of the parameterization influence on the final results of the correction, the aerosol model and its optical thickness being important parameters to be properly adjusted. The effects of corrections were studied in vegetation and soil sites belonging to different protected semi-arid ecosystems (high mountain and coastal areas). In summary, the superior performance of model-based algorithms, 6S in particular, has been demonstrated, achieving reflectance estimations very close to the in-situ measurements (RMSE of between 2% and 3%). Finally, an example of the importance of the atmospheric correction in the vegetation estimation in these natural areas is presented, allowing the robust mapping of species and the analysis of multitemporal variations related to the human activity and climate change.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garono, Ralph; Anderson, Becci; Robinson, Rob

The Lower Columbia River Estuary Management Plan (Jerrick, 1991) recognizes the positive relationship between the conservation of fish and wildlife habitat, and sustaining their populations. An important component of fish and wildlife conservation and management is the identification of habitats, trends in habitat change, and delineation of habitat for preservation, restoration or enhancement. Alterations to the environment, such as hydropower generation, dredging, forestry, agriculture, channel alteration, diking, bank stabilization and floodplain development, have dramatically altered both the type and distribution of habitats along the Columbia River Estuary (CRE) and its floodplain. Along the Columbia River, tidally influenced habitats occur frommore » the river mouth to the Bonneville Dam, a distance of 230 km. If we are to effectively manage the natural resources of the Columbia River ecosystem, there is a need to understand how habitats have changed because fish and wildlife populations are known to respond to changes in habitat quality and distribution. The goal of this study was to measure the amount and type of change of CRE land cover from 1992 to 2000. We performed a change analysis on two spatial data sets describing land cover along the lower portion of the estuary (Fig. 1). The 1992 data set was created by the NOAA Coastal Remote Sensing, Coastal Change Analysis Program (C-CAP) in cooperation with Columbia River Estuary Study Task Force (CREST), the National Marine Fisheries Service (NMFS) Point Adams Field Station, and State of Washington Department of Natural Resources (DNR). The 2000 data set was produced by Earth Design Consultants, Inc. (EDC) and the Wetland Ecosystem Team (WET: University of Washington) as part of a larger Lower Columbia River Estuary Partnership (Estuary Partnership) habitat mapping study. Although the image classification methodologies used to create the data sets differed, both data sets were produced by classifying Landsat Thematic Mapper (TM) satellite imagery, making it feasible to assess land cover changes between 1992 and 2000.« less

Sensor assignment to mission in AI-TECD

NASA Astrophysics Data System (ADS)

Ganger, Robert; de Mel, Geeth; Pham, Tien; Rudnicki, Ronald; Schreiber, Yonatan

2016-05-01

Sensor-mission assignment involves the allocation of sensors and other information-providing resources to missions in order to cover the information needs of the individual tasks within each mission. The importance of efficient and effective means to find appropriate resources for tasks is exacerbated in the coalition context where the operational environment is dynamic and a multitude of critically important tasks need to achieve their collective goals to meet the objectives of the coalition. The Sensor Assignment to Mission (SAM) framework—a research product of the International Technology Alliance in Network and Information Sciences (NIS-ITA) program—provided the first knowledge intensive resource selection approach for the sensor network domain so that contextual information could be used to effectively select resources for tasks in coalition environments. Recently, CUBRC, Inc. was tasked with operationalizing the SAM framework through the use of the I2WD Common Core Ontologies for the Communications-Electronics Research, Development and Engineering Center (CERDEC) sponsored Actionable Intelligence Technology Enabled Capabilities Demonstration (AI-TECD). The demonstration event took place at Fort Dix, New Jersey during July 2015, and this paper discusses the integration and the successful demonstration of the SAM framework within the AI-TECD, lessons learned, and its potential impact in future operations.

Tropical land use land cover mapping in Pará (Brazil) using discriminative Markov random fields and multi-temporal TerraSAR-X data

NASA Astrophysics Data System (ADS)

Hagensieker, Ron; Roscher, Ribana; Rosentreter, Johannes; Jakimow, Benjamin; Waske, Björn

2017-12-01

Remote sensing satellite data offer the unique possibility to map land use land cover transformations by providing spatially explicit information. However, detection of short-term processes and land use patterns of high spatial-temporal variability is a challenging task. We present a novel framework using multi-temporal TerraSAR-X data and machine learning techniques, namely discriminative Markov random fields with spatio-temporal priors, and import vector machines, in order to advance the mapping of land cover characterized by short-term changes. Our study region covers a current deforestation frontier in the Brazilian state Pará with land cover dominated by primary forests, different types of pasture land and secondary vegetation, and land use dominated by short-term processes such as slash-and-burn activities. The data set comprises multi-temporal TerraSAR-X imagery acquired over the course of the 2014 dry season, as well as optical data (RapidEye, Landsat) for reference. Results show that land use land cover is reliably mapped, resulting in spatially adjusted overall accuracies of up to 79% in a five class setting, yet limitations for the differentiation of different pasture types remain. The proposed method is applicable on multi-temporal data sets, and constitutes a feasible approach to map land use land cover in regions that are affected by high-frequent temporal changes.

Very High Resolution Tree Cover Mapping for Continental United States using Deep Convolutional Neural Networks

NASA Technical Reports Server (NTRS)

Ganguly, Sangram; Kalia, Subodh; Li, Shuang; Michaelis, Andrew; Nemani, Ramakrishna R.; Saatchi, Sassan A

2017-01-01

Uncertainties in input land cover estimates contribute to a significant bias in modeled above ground biomass (AGB) and carbon estimates from satellite-derived data. The resolution of most currently used passive remote sensing products is not sufficient to capture tree canopy cover of less than ca. 10-20 percent, limiting their utility to estimate canopy cover and AGB for trees outside of forest land. In our study, we created a first of its kind Continental United States (CONUS) tree cover map at a spatial resolution of 1-m for the 2010-2012 epoch using the USDA NAIP imagery to address the present uncertainties in AGB estimates. The process involves different tasks including data acquisition ingestion to pre-processing and running a state-of-art encoder-decoder based deep convolutional neural network (CNN) algorithm for automatically generating a tree non-tree map for almost a quarter million scenes. The entire processing chain including generation of the largest open source existing aerial satellite image training database was performed at the NEX supercomputing and storage facility. We believe the resulting forest cover product will substantially contribute to filling the gaps in ongoing carbon and ecological monitoring research and help quantifying the errors and uncertainties in derived products.

Land-cover observations as part of a Global Earth Observation System of Systems (GEOSS): Progress, activities, and prospects

USGS Publications Warehouse

Herold, M.; Woodcock, C.E.; Loveland, Thomas R.; Townshend, J.; Brady, M.; Steenmans, C.; Schmullius, C. C.

2008-01-01

The international land-cover community has been working with GEO since 2005 to build the foundations for land-cover observations as an integral part of a Global Earth Observation System of Systems (GEOSS). The Group on Earth Observation (GEO) has provided the platform to elevate the societal relevance of land cover monitoring and helped to link a diverse set of global, regional, and national activities. A dedicated 2007-2009 GEO work plan task has resulted in achievements on the strategic and implementation levels. Integrated Global Observations of the Land (IGOL), the land theme of the Integrated Global Observation Strategy (IGOS), has been approved and is now in the process of transition into GEO implementation. New global land-cover maps at moderate spatial resolutions (i.e., GLOBCOVER) are being produced using guidelines and standards of the international community. The Middecadal Global Landsat Survey for 2005-2006 is extending previous 1990 and 2000 efforts for global, high-quality Landsat data. Despite this progress, essential challenges for building a sustained global land-cover-observing system remain, including: international cooperation on the continuity of global observations; ensuring consistency in land monitoring approaches; community engagement and country participation in mapping activities; commitment to ongoing quality assurance and validation; and regional networking and capacity building.

Very High Resolution Tree Cover Mapping for Continental United States using Deep Convolutional Neural Networks

NASA Astrophysics Data System (ADS)

Ganguly, S.; Kalia, S.; Li, S.; Michaelis, A.; Nemani, R. R.; Saatchi, S.

2017-12-01

Uncertainties in input land cover estimates contribute to a significant bias in modeled above gound biomass (AGB) and carbon estimates from satellite-derived data. The resolution of most currently used passive remote sensing products is not sufficient to capture tree canopy cover of less than ca. 10-20 percent, limiting their utility to estimate canopy cover and AGB for trees outside of forest land. In our study, we created a first of its kind Continental United States (CONUS) tree cover map at a spatial resolution of 1-m for the 2010-2012 epoch using the USDA NAIP imagery to address the present uncertainties in AGB estimates. The process involves different tasks including data acquisition/ingestion to pre-processing and running a state-of-art encoder-decoder based deep convolutional neural network (CNN) algorithm for automatically generating a tree/non-tree map for almost a quarter million scenes. The entire processing chain including generation of the largest open source existing aerial/satellite image training database was performed at the NEX supercomputing and storage facility. We believe the resulting forest cover product will substantially contribute to filling the gaps in ongoing carbon and ecological monitoring research and help quantifying the errors and uncertainties in derived products.

Dependence of behavioral performance on material category in an object grasping task with monkeys.

PubMed

Yokoi, Isao; Tachibana, Atsumichi; Minamimoto, Takafumi; Goda, Naokazu; Komatsu, Hidehiko

2018-05-02

Material perception is an essential part of our cognitive function that enables us to properly interact with our complex daily environment. One important aspect of material perception is its multimodal nature. When we see an object, we generally recognize its haptic properties as well as its visual properties. Consequently, one must examine behavior using real objects that are perceived both visually and haptically to fully understand the characteristics of material perception. As a first step, we examined whether there is any difference in the behavioral responses to different materials in monkeys trained to perform an object grasping task in which they saw and grasped rod-shaped real objects made of various materials. We found that the monkeys' behavior in the grasping task, measured based on the success rate and the pulling force, differed depending on the material category. Monkeys easily and correctly grasped objects of some materials, such as metal and glass, but failed to grasp objects of other materials. In particular, monkeys avoided grasping fur-covered objects. The differences in the behavioral responses to the material categories cannot be explained solely based on the degree of familiarity with the different materials. These results shed light on the organization of multimodal representation of materials, where their biological significance is an important factor. In addition, a monkey that avoided touching real fur-covered objects readily touched images of the same objects presented on a CRT display. This suggests employing real objects is important when studying behaviors related to material perception.

BLINKER: Automated Extraction of Ocular Indices from EEG Enabling Large-Scale Analysis

PubMed Central

Kleifges, Kelly; Bigdely-Shamlo, Nima; Kerick, Scott E.; Robbins, Kay A.

2017-01-01

Electroencephalography (EEG) offers a platform for studying the relationships between behavioral measures, such as blink rate and duration, with neural correlates of fatigue and attention, such as theta and alpha band power. Further, the existence of EEG studies covering a variety of subjects and tasks provides opportunities for the community to better characterize variability of these measures across tasks and subjects. We have implemented an automated pipeline (BLINKER) for extracting ocular indices such as blink rate, blink duration, and blink velocity-amplitude ratios from EEG channels, EOG channels, and/or independent components (ICs). To illustrate the use of our approach, we have applied the pipeline to a large corpus of EEG data (comprising more than 2000 datasets acquired at eight different laboratories) in order to characterize variability of certain ocular indicators across subjects. We also investigate dependence of ocular indices on task in a shooter study. We have implemented our algorithms in a freely available MATLAB toolbox called BLINKER. The toolbox, which is easy to use and can be applied to collections of data without user intervention, can automatically discover which channels or ICs capture blinks. The tools extract blinks, calculate common ocular indices, generate a report for each dataset, dump labeled images of the individual blinks, and provide summary statistics across collections. Users can run BLINKER as a script or as a plugin for EEGLAB. The toolbox is available at https://github.com/VisLab/EEG-Blinks. User documentation and examples appear at http://vislab.github.io/EEG-Blinks/. PMID:28217081

Mapping to Estimate Health-State Utility from Non-Preference-Based Outcome Measures: An ISPOR Good Practices for Outcomes Research Task Force Report.

PubMed

Wailoo, Allan J; Hernandez-Alava, Monica; Manca, Andrea; Mejia, Aurelio; Ray, Joshua; Crawford, Bruce; Botteman, Marc; Busschbach, Jan

2017-01-01

Economic evaluation conducted in terms of cost per quality-adjusted life-year (QALY) provides information that decision makers find useful in many parts of the world. Ideally, clinical studies designed to assess the effectiveness of health technologies would include outcome measures that are directly linked to health utility to calculate QALYs. Often this does not happen, and even when it does, clinical studies may be insufficient for a cost-utility assessment. Mapping can solve this problem. It uses an additional data set to estimate the relationship between outcomes measured in clinical studies and health utility. This bridges the evidence gap between available evidence on the effect of a health technology in one metric and the requirement for decision makers to express it in a different one (QALYs). In 2014, ISPOR established a Good Practices for Outcome Research Task Force for mapping studies. This task force report provides recommendations to analysts undertaking mapping studies, those that use the results in cost-utility analysis, and those that need to critically review such studies. The recommendations cover all areas of mapping practice: the selection of data sets for the mapping estimation, model selection and performance assessment, reporting standards, and the use of results including the appropriate reflection of variability and uncertainty. This report is unique because it takes an international perspective, is comprehensive in its coverage of the aspects of mapping practice, and reflects the current state of the art. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Form, Content, and Gender Differences in Lego[R] Block Creations by Japanese Adolescents

ERIC Educational Resources Information Center

Kato, Daiki; Morita, Miyako

2009-01-01

This study examined general features of Lego block creations produced by Japanese adolescents with no known mental health disorders. The block creations of 33 participants were assessed for form, content, and gender differences. Time spent on the task, amount of area covered, and quantity and types of blocks used were measured and correlated with…

Compendium of Lecture Notes for Training Class III Meteorological Personnel.

ERIC Educational Resources Information Center

Retallack, B. J.

This compendium of lecture notes provides a course of study for persons who may be involved in a variety of specialized meteorological tasks. The course is considered to be advanced and assumes students have had introductory experiences in meteorology and earth science (covered in a similar compendium). The material is presented in seven units…

Proceedings of the Annual Conference of the Military Testing Association (17th, Fort Benjamin Harrison, Indiana, September 15-19, 1975).

ERIC Educational Resources Information Center

1975

The 62 papers presented at the 1975 conference of the Military Testing Association cover almost all areas of military and occupational assessment and evaluation, and are arranged in 19 "common subject-matter groupings": Symposium (on Aptitude Testing), Training Extension Courses, Computerized Testing, Task Validation and Qualification…

Model Curriculum Emphasizing Transition: A Curriculum Planning Guide for Students with Mild Disabilities.

ERIC Educational Resources Information Center

Andersen, Lee; And Others

This curriculum emphasizes successful transition from school to work and to a quality adult life for students with mild disabilities. The curriculum includes a scope and sequence outlining 11 subject matter content areas, covering tasks appropriate for learners from a developmental age of 1 month to 21 years. The 11 content areas include…

Utah Migrant Council Health Specialist Training Program. Evaluation Report, May 1973.

ERIC Educational Resources Information Center

Jones, Tom; Gisler, John

The project involved 14 trainees who were employed by the Utah Migrant Council prior to their training with 8 trainers. Pre-determined by the basic job descriptions for the Health Specialist, the objectives dealt with two basic factors: trainee knowledge and trainee skills in performing specific tasks. Areas covered by the objectives were…

Study of Pu consumption in advanced light water reactors: Evaluation of GE advanced boiling water reactor plants - compilation of Phase 1B task reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1993-09-15

This report contains an extensive evaluation of GE advanced boiling water reactor plants prepared for United State Department of Energy. The general areas covered in this report are: core and system performance; fuel cycle; infrastructure and deployment; and safety and environmental approval.

The Cognitive Developmental Approach to "Epistemology" and Its Relation to Logical and Moral Stages.

ERIC Educational Resources Information Center

Broughton, John

This paper presents a cross-sectional investigation of adolescents' and young adults' reflective epistemological development. Three groups of 8 subjects (4 male and female) ages 10, 14, and 18 were given Piagetian tasks, the Kohlberg moral judgment questionnaire, and an epistemology interview covering such concepts as knowledge, thought, feeling,…

Job Ideas for Today's Woman.

ERIC Educational Resources Information Center

Lembeck, Ruth

A women entering the job market for the first time, getting back to it, or changing jobs can encounter many problems. This step-by-step guide is designed to make this task easier. Of the 1,000 jobs listed there are several special interest areas covered: foods, parties, retailing, direct or mail-order selling, real estate, insurance, animals,…

Criteria for Evaluating United States Marine Corps Installation Strategic Management

DTIC Science & Technology

2001-12-01

STATES MARINE CORPS INSTALLATION STRATEGIC MANAGEMENT by James E. Leighty December 2001 Thesis Advisor: Joseph San Miguel Report...Marine Corps Installation Strategic Management Contract Number Grant Number Program Element Number Author(s) Leighty, James Project Number Task...TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE: Criteria For Evaluating United States Marine Corps Installation Strategic

Teacher Candidates' Perception Level of Environmental Pollutant and Their Risk Factors

ERIC Educational Resources Information Center

Oztas, Fulya; Kalipci, Erkan

2009-01-01

It is generally accepted that the environmental education deals with a wide range of environmental experiences, methods and processes. Teaching the subject of the environment should not be considered as an easy task. It should not only cover pure ecology education; but also include the citizenship responsibilities and the problems that are sourced…

Kodak Skills Enhancement Program Curriculum: Math for Manufacturing and Quality Control. Report No. AEP-93-01.

ERIC Educational Resources Information Center

Beaudin, Bart P.; And Others

This teacher's guide is intended for use in helping Kodak Corporation employees develop the basic mathematics skills required to perform the manufacturing and quality control tasks expected of them. The following topics are covered in the first five modules: the four basic functions (adding, subtracting, multiplying, and dividing), calculations…

Biomedical Mathematics, Unit I: Measurement, Linear Functions and Dimensional Algebra. Student Text. Revised Version, 1975.

ERIC Educational Resources Information Center

Biomedical Interdisciplinary Curriculum Project, Berkeley, CA.

This text presents lessons relating specific mathematical concepts to the ideas, skills, and tasks pertinent to the health care field. Among other concepts covered are linear functions, vectors, trigonometry, and statistics. Many of the lessons use data acquired during science experiments as the basis for exercises in mathematics. Lessons present…

20 CFR 30.2 - In general, how have the tasks associated with the administration of EEOICPA claims process been...

Code of Federal Regulations, 2012 CFR

2012-04-01

... OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR ENERGY EMPLOYEES OCCUPATIONAL ILLNESS COMPENSATION PROGRAM ACT OF 2000 CLAIMS FOR COMPENSATION UNDER THE ENERGY EMPLOYEES OCCUPATIONAL ILLNESS... illnesses under Part B of the Act and covered illnesses under Part E of the Act. In addition, OWCP provides...

20 CFR 30.2 - In general, how have the tasks associated with the administration of EEOICPA claims process been...

Code of Federal Regulations, 2010 CFR

2010-04-01

... OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR ENERGY EMPLOYEES OCCUPATIONAL ILLNESS COMPENSATION PROGRAM ACT OF 2000 CLAIMS FOR COMPENSATION UNDER THE ENERGY EMPLOYEES OCCUPATIONAL ILLNESS... illnesses under Part B of the Act and covered illnesses under Part E of the Act. In addition, OWCP provides...

20 CFR 30.2 - In general, how have the tasks associated with the administration of EEOICPA claims process been...

Code of Federal Regulations, 2013 CFR

2013-04-01

... OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR ENERGY EMPLOYEES OCCUPATIONAL ILLNESS COMPENSATION PROGRAM ACT OF 2000 CLAIMS FOR COMPENSATION UNDER THE ENERGY EMPLOYEES OCCUPATIONAL ILLNESS... illnesses under Part B of the Act and covered illnesses under Part E of the Act. In addition, OWCP provides...

20 CFR 30.2 - In general, how have the tasks associated with the administration of EEOICPA claims process been...

Code of Federal Regulations, 2011 CFR

2011-04-01

... OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR ENERGY EMPLOYEES OCCUPATIONAL ILLNESS COMPENSATION PROGRAM ACT OF 2000 CLAIMS FOR COMPENSATION UNDER THE ENERGY EMPLOYEES OCCUPATIONAL ILLNESS... illnesses under Part B of the Act and covered illnesses under Part E of the Act. In addition, OWCP provides...

20 CFR 30.2 - In general, how have the tasks associated with the administration of EEOICPA claims process been...

Code of Federal Regulations, 2014 CFR

2014-04-01

... OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR ENERGY EMPLOYEES OCCUPATIONAL ILLNESS COMPENSATION PROGRAM ACT OF 2000 CLAIMS FOR COMPENSATION UNDER THE ENERGY EMPLOYEES OCCUPATIONAL ILLNESS... illnesses under Part B of the Act and covered illnesses under Part E of the Act. In addition, OWCP provides...

Multispectral Coatings

DTIC Science & Technology

2010-01-01

failure, whereas the polymer nanocomposite gave ductile failure with less surface damage. Task 2. Highly reflective self-assembled coatings . The...AFRL-RX-WP-TR-2010-4036 MULTISPECTRAL COATINGS Eric Grulke University of Kentucky Thad Druffel Optical Dynamics JANUARY...REPORT TYPE 3. DATES COVERED (From - To) January 2010 Final 28 November 2005 – 30 September 2008 4. TITLE AND SUBTITLE MULTISPECTRAL COATINGS 5a

Building & Property Maintenance. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents an overview of the 2-year competency-based building and property maintenance programs offered in Ohio schools at the secondary and/or adult levels. The overview covers the attributes and qualifications required to be a successful worker in the industry and the typical tasks performed by building and property maintenance…

Making the Most of Your School Site. School Buildings Planning, Design, and Construction Series No. 2.

ERIC Educational Resources Information Center

Odell, John H.

A school construction guide offers key personnel in school development projects information on the complex task of master planning and construction of schools in Australia. This chapter of the guide provides advice on site selection covering selection criteria; traffic issues; and site services, such as water, power, and sewer. Additionally…

Retailing. Instructor's Guide Sheets and Instructor's Package, Modules R 1-45. Competency-Based Education.

ERIC Educational Resources Information Center

Kentucky State Dept. of Education, Frankfort.

This package contains instructor's guide sheets and student task assignment sheets for Modules R 1-45 of the competency-based curriculum in retailing developed for use in secondary and postsecondary schools in Kentucky. Some of the topics covered in the modules include the following: retailing--past, present, and future; retailing occupations;…

VENI, video, VICI: The merging of computer and video technologies

NASA Technical Reports Server (NTRS)

Horowitz, Jay G.

1993-01-01

The topics covered include the following: High Definition Television (HDTV) milestones; visual information bandwidth; television frequency allocation and bandwidth; horizontal scanning; workstation RGB color domain; NTSC color domain; American HDTV time-table; HDTV image size; digital HDTV hierarchy; task force on digital image architecture; open architecture model; future displays; and the ULTIMATE imaging system.

The Tablecloth Pull Revisited

ERIC Educational Resources Information Center

Vollmer, Michael; Mollmann, Klaus-Peter

2015-01-01

A very old and well-known magical trick is the so-called tablecloth pull. A table is covered with a tablecloth, on top of which are certain objects. The task is to remove the tablecloth while the objects--which must not be touched--stay on top of the table. This article describes the physics behind the experiment, and presents examples recorded…

Nurse managers' decision-making in daily unit operation in peri-operative settings: a cross-sectional descriptive study.

PubMed

Siirala, Eriikka; Peltonen, Laura-Maria; Lundgrén-Laine, Heljä; Salanterä, Sanna; Junttila, Kristiina

2016-09-01

To describe the tactical and the operational decisions made by nurse managers when managing the daily unit operation in peri-operative settings. Management is challenging as situations change rapidly and decisions are constantly made. Understanding decision-making in this complex environment helps to develop decision support systems to support nurse managers' operative and tactical decision-making. Descriptive cross-sectional design. Data were collected from 20 nurse managers with the think-aloud method during the busiest working hours and analysed using thematic content analysis. Nurse managers made over 700 decisions; either ad hoc (n = 289), near future (n = 268) or long-term (n = 187) by nature. Decisions were often made simultaneously with many interruptions. Ad hoc decisions covered staff allocation, ensuring adequate staff, rescheduling surgical procedures, confirmation tangible resources and following-up the daily unit operation. Decisions in the near future were: planning of surgical procedures and tangible resources, and planning staff allocation. Long-term decisions were: human recourses, nursing development, supplies and equipment, and finances in the unit. Decision-making was vulnerable to interruptions, which sometimes complicated the managing tasks. The results can be used when planning decision support systems and when defining the nurse managers' tasks in peri-operative settings. © 2016 John Wiley & Sons Ltd.

Current state of active-fault monitoring in Taiwan

NASA Astrophysics Data System (ADS)

Hou, C.; Lin, C.; Chen, Y.; Liu, H.; Chen, C.; Lin, Y.; Chen, C.

2008-12-01

The earthquake is one of the major hazard sources in Taiwan where an arc-continent collision is on-going. For the purpose of seismic hazard mitigation, to understand current situation of each already-known active fault is urgently needed. After the 1999 Chi-chi earthquake shocked Taiwan, the Central Geological Survey (CGS) of Taiwan aggressively promoted the tasks on studying the activities of active faults. One of them is the deployment of miscellaneous monitoring networks to cover all the target areas, where the earthquake occurrence potentials on active faults are eager to be answered. Up to the end of 2007, CGS has already deployed over 1000 GPS campaign sites, 44 GPS stations in continuous mode, and 42 leveling transects across the major active faults with a total ground distance of 974 km. The campaign sites and leveling tasks have to be measured once a year. The resulted crustal deformation will be relied on to derive the fault slip model. The time series analysis on continuous mode of GPS can further help understand the details of the fault behavior. In addition, 12 down-hole strain meters, five stations for liquid flux and geochemical proxies, and two for water table monitoring have been also installed to seek possible anomalies related to the earthquake activities. It may help discover reliable earthquake precursors.

Project management web tools at the MICE experiment

NASA Astrophysics Data System (ADS)

Coney, L. R.; Tunnell, C. D.

2012-12-01

Project management tools like Trac are commonly used within the open-source community to coordinate projects. The Muon Ionization Cooling Experiment (MICE) uses the project management web application Redmine to host mice.rl.ac.uk. Many groups within the experiment have a Redmine project: analysis, computing and software (including offline, online, controls and monitoring, and database subgroups), executive board, and operations. All of these groups use the website to communicate, track effort, develop schedules, and maintain documentation. The issue tracker is a rich tool that is used to identify tasks and monitor progress within groups on timescales ranging from immediate and unexpected problems to milestones that cover the life of the experiment. It allows the prioritization of tasks according to time-sensitivity, while providing a searchable record of work that has been done. This record of work can be used to measure both individual and overall group activity, identify areas lacking sufficient personnel or effort, and as a measure of progress against the schedule. Given that MICE, like many particle physics experiments, is an international community, such a system is required to allow easy communication within a global collaboration. Unlike systems that are purely wiki-based, the structure of a project management tool like Redmine allows information to be maintained in a more structured and logical fashion.

Modeling using discrete event simulation: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--4.

PubMed

Karnon, Jonathan; Stahl, James; Brennan, Alan; Caro, J Jaime; Mar, Javier; Möller, Jörgen

2012-01-01

Discrete event simulation (DES) is a form of computer-based modeling that provides an intuitive and flexible approach to representing complex systems. It has been used in a wide range of health care applications. Most early applications involved analyses of systems with constrained resources, where the general aim was to improve the organization of delivered services. More recently, DES has increasingly been applied to evaluate specific technologies in the context of health technology assessment. The aim of this article was to provide consensus-based guidelines on the application of DES in a health care setting, covering the range of issues to which DES can be applied. The article works through the different stages of the modeling process: structural development, parameter estimation, model implementation, model analysis, and representation and reporting. For each stage, a brief description is provided, followed by consideration of issues that are of particular relevance to the application of DES in a health care setting. Each section contains a number of best practice recommendations that were iterated among the authors, as well as among the wider modeling task force. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Using link analysis to explore the impact of the physical environment on pharmacist tasks.

PubMed

Lester, Corey A; Chui, Michelle A

2016-01-01

National community pharmacy organizations have been redesigning pharmacies to better facilitate direct patient care. However, evidence suggests that changing the physical layout of a pharmacy prior to understanding how the environment impacts pharmacists' work may not achieve the desired benefits. This study describes an objective method to understanding how the physical layout of the pharmacy may affect how pharmacists perform tasks. Link analysis is a systems engineering method used to describe the influence of the physical environment on task completion. This study used a secondary data set of field notes collected from 9 h of direct observation in one mass-merchandise community pharmacy in the U.S. State, Wisconsin. A node is an individual location in the environment. A link is the movement between two nodes. Tasks were inventoried and task themes identified. The mean, minimum, and maximum number of links needed to complete each task were then determined and used to construct a link table. A link diagram is a graphical display showing the links in conjunction with the physical layout of the pharmacy. A total of 92 unique tasks were identified resulting in 221 links. Tasks were sorted into five themes: patient care activities, insurance issues, verifying prescriptions, filling prescriptions, and other. Insurance issues required the greatest number of links with a mean of 4.75. Verifying prescriptions and performing patient care were the most commonly performed tasks with 36 and 30 unique task occurrences, respectively. Link analysis provides an objective method for identifying how a pharmacist interacts with the physical environment to complete tasks. This method provides designers with useful information to target interventions to improve the effectiveness of pharmacist work. Analysis beyond link analysis should be considered for large scale system redesign. Copyright © 2015 Elsevier Inc. All rights reserved.

Task modulated brain connectivity of the amygdala: a meta-analysis of psychophysiological interactions.

PubMed

Di, Xin; Huang, Jia; Biswal, Bharat B

2017-01-01

Understanding functional connectivity of the amygdala with other brain regions, especially task modulated connectivity, is a critical step toward understanding the role of the amygdala in emotional processes and the interactions between emotion and cognition. The present study performed coordinate-based meta-analysis on studies of task modulated connectivity of the amygdala which used psychophysiological interaction (PPI) analysis. We first analyzed 49 PPI studies on different types of tasks using activation likelihood estimation (ALE) meta-analysis. Widespread cortical and subcortical regions showed consistent task modulated connectivity with the amygdala, including the medial frontal cortex, bilateral insula, anterior cingulate, fusiform gyrus, parahippocampal gyrus, thalamus, and basal ganglia. These regions were in general overlapped with those showed coactivations with the amygdala, suggesting that these regions and amygdala are not only activated together, but also show different levels of interactions during tasks. Further analyses with subsets of PPI studies revealed task specific functional connectivities with the amygdala that were modulated by fear processing, face processing, and emotion regulation. These results suggest a dynamic modulation of connectivity upon task demands, and provide new insights on the functions of the amygdala in different affective and cognitive processes. The meta-analytic approach on PPI studies may offer a framework toward systematical examinations of task modulated connectivity.

Cognitive Task Analysis: Implications for the Theory and Practice of Instructional Design.

ERIC Educational Resources Information Center

Dehoney, Joanne

Cognitive task analysis grew out of efforts by cognitive psychologists to understand problem-solving in a lab setting. It has proved a useful tool for describing expert performance in complex problem solving domains. This review considers two general models of cognitive task analysis and examines the procedures and results of analyses in three…