Academic Affiliations of Social Work Authors: A Citation Analysis of Six Major Journals.
ERIC Educational Resources Information Center
Thyer, Bruce; Bentley, Kia J.
1986-01-01
Citation analysis as an indicator of scholarly activity is examined, and a discrepancy is noted between two previously published studies on the academic affiliations of social work authors, in light of the authors' present citation analysis of six major work journals. (Author/MH)
Towards a Standardized Line List for G 191-B2B and other DA Type Objects
NASA Astrophysics Data System (ADS)
Preval, S. P.; Barstow, M. A.; Holberg, J. B.; Dickinson, N. J.
2013-01-01
We present a comprehensive analysis of the far UV spectrum of G 191-B2B over the range of 900-1700Å using co-added data from the FUSE and STIS archives. While previous identifications made by Holberg et al. (2003) are reaffirmed in this work, it is found that many previously unidentified lines can now be attributed to Fe, Ni, and a few lighter metals. Future work includes extending this detailed analysis to a wider range of DA objects, in the expectation that a more complete analysis of their atmospheres can be realised.
Steenstra, Ivan A; Knol, Dirk L; Bongers, Paulien M; Anema, Johannes R; van Mechelen, Willem; de Vet, Henrica C W
2009-05-20
Exploratory subgroup analysis in a randomized controlled trial (RCT). To detect possible moderators in the effectiveness of a workplace intervention in a population of workers with sick leave due to sub acute nonspecific low back pain. In a recently published RCT, a workplace intervention was effective on return to work, compared to usual care. Examining the heterogeneity of effect sizes within the population in this RCT (n = 196) can lead to information on the effectiveness of the intervention in subgroups of patients. A subgroup analysis was performed by adding interaction terms to the statistical model. Before analysis the following possible moderators for treatment were identified: age, gender, pain, functional status, heavy work, and sick leave in the previous 12 months. Cox regression analyses were performed and survival curves were plotted. The interaction (P = 0.02) between age (dichotomized at the median value) and the workplace intervention indicates a modifying effect. The workplace intervention is more effective for workers > or =44 years (HR, 95% CI = 2.5, [1.6, 4.1] vs. 1.2 [0.8, 1.8] for workers <44 years old). The interaction between sick leave in the previous 12 months and the workplace intervention is significant (P = 0.02). The intervention is more effective for workers with previous sick leave (HR, 95% CI = 2.8 [1.7, 4.9] vs. 1.3 [0.8, 2.0]). A modifying effect of gender, heavy work, and pain score and functional status on the effectiveness of this intervention was not found. The findings from these exploratory analyses should be tested in future RCTs. This workplace intervention seems very suitable for return to work of older workers and workers with previous sick leave. Gender, perceived heavy work, and baseline scores in pain and functional status should not be a basis for assignment to this intervention.
Massive Open Online Course Completion Rates Revisited: Assessment, Length and Attrition
ERIC Educational Resources Information Center
Jordan, Katy
2015-01-01
This analysis is based upon enrolment and completion data collected for a total of 221 Massive Open Online Courses (MOOCs). It extends previously reported work (Jordan, 2014) with an expanded dataset; the original work is extended to include a multiple regression analysis of factors that affect completion rates and analysis of attrition rates…
ERIC Educational Resources Information Center
Marill, Thomas; And Others
The aim of the CYCLOPS Project research is the development of techniques for allowing computers to perform visual scene analysis, pre-processing of visual imagery, and perceptual learning. Work on scene analysis and learning has previously been described. The present report deals with research on pre-processing and with further work on scene…
DuVernet, Amy M; Dierdorff, Erich C; Wilson, Mark A
2015-09-01
Work analysis is fundamental to designing effective human resource systems. The current investigation extends previous research by identifying the differential effects of common design decisions, purposes, and organizational contexts on the data generated by work analyses. The effects of 19 distinct factors that span choices of descriptor, collection method, rating scale, and data source, as well as project purpose and organizational features, are explored. Meta-analytic results cumulated from 205 articles indicate that many of these variables hold significant consequences for work analysis data. Factors pertaining to descriptor choice, collection method, rating scale, and the purpose for conducting the work analysis each showed strong associations with work analysis data. The source of the work analysis information and organizational context in which it was conducted displayed fewer relationships. Findings can be used to inform choices work analysts make about methodology and postcollection evaluations of work analysis information. (c) 2015 APA, all rights reserved).
Power Analysis in Two-Level Unbalanced Designs
ERIC Educational Resources Information Center
Konstantopoulos, Spyros
2010-01-01
Previous work on statistical power has discussed mainly single-level designs or 2-level balanced designs with random effects. Although balanced experiments are common, in practice balance cannot always be achieved. Work on class size is one example of unbalanced designs. This study provides methods for power analysis in 2-level unbalanced designs…
Karlsson, Nadine; Skargren, Elisabeth; Kristenson, Margareta
2010-10-26
While back pain and stressful work environment are shown to be important causes of sickness absence the effect of psychosocial resources on sickness absence, and on self assessed work ability, is less commonly investigated. The aim of this study was to assess these associations in a two-year follow-up study. 341 working people aged 45 to 64, randomly drawn from the population, responded to a questionnaire at baseline and at a two-year follow-up. Poisson regression was used to analyse the association of psychosocial factors (psychosocial instruments on work environment, emotional support and psychological resources) and previous back pain (low back and/or neck) at baseline with sickness absence (spells and days) at follow-up, controlling for effects of age, sex, BMI, smoking, alcohol, occupation, disease and previous sickness absence. Logistic regression was used to study the associations of psychosocial factors and previous back pain at baseline with self assessed prognosis of poor work ability six months from follow-up. Finally, a multivariate analysis tested the independent effects of previous back pain and 3 psychosocial factors derived in a factor analysis: 1. work environment; 2. emotional support; 3. psychological resources, on work ability and absence days and spells. 80% of the sickness absence spells within the last 12 months before follow-up were short-term (≤ 14 days). In the final model, high emotional support predicted more sickness absence spells (RR 1.36; 1.11-1.67) and days (RR 1.68, 1.22-2.31). Previous back pain (OR 2.56; 1.13-5.81), high emotional support (OR 1.58; 1.02-2.46), and low psychological resources (OR 0.62; 0.44-0.89) were related to poorer self assessed prognosis of work ability at follow up. In a general middle aged working population high emotional support was related to more sickness absence and also poorer self assessed prognosis of work ability. Our findings suggest that both sickness absence and self assessed work ability are dependent of life outside work and can be affected by a person's close community.
Augmenting Conceptual Design Trajectory Tradespace Exploration with Graph Theory
NASA Technical Reports Server (NTRS)
Dees, Patrick D.; Zwack, Mathew R.; Steffens, Michael; Edwards, Stephen
2016-01-01
Within conceptual design changes occur rapidly due to a combination of uncertainty and shifting requirements. To stay relevant in this fluid time, trade studies must also be performed rapidly. In order to drive down analysis time while improving the information gained by these studies, surrogate models can be created to represent the complex output of a tool or tools within a specified tradespace. In order to create this model however, a large amount of data must be collected in a short amount of time. By this method, the historical approach of relying on subject matter experts to generate the data required is schedule infeasible. However, by implementing automation and distributed analysis the required data can be generated in a fraction of the time. Previous work focused on setting up a tool called multiPOST capable of orchestrating many simultaneous runs of an analysis tool assessing these automated analyses utilizing heuristics gleaned from the best practices of current subject matter experts. In this update to the previous work, elements of graph theory are included to further drive down analysis time by leveraging data previously gathered. It is shown to outperform the previous method in both time required, and the quantity and quality of data produced.
Wavelet Statistical Analysis of Low-Latitude Geomagnetic Measurements
NASA Astrophysics Data System (ADS)
Papa, A. R.; Akel, A. F.
2009-05-01
Following previous works by our group (Papa et al., JASTP, 2006), where we analyzed a series of records acquired at the Vassouras National Geomagnetic Observatory in Brazil for the month of October 2000, we introduced a wavelet analysis for the same type of data and for other periods. It is well known that wavelets allow a more detailed study in several senses: the time window for analysis can be drastically reduced if compared to other traditional methods (Fourier, for example) and at the same time allow an almost continuous accompaniment of both amplitude and frequency of signals as time goes by. This advantage brings some possibilities for potentially useful forecasting methods of the type also advanced by our group in previous works (see for example, Papa and Sosman, JASTP, 2008). However, the simultaneous statistical analysis of both time series (in our case amplitude and frequency) is a challenging matter and is in this sense that we have found what we consider our main goal. Some possible trends for future works are advanced.
Long working hours and sickness absence-a fixed effects design.
Bernstrøm, Vilde Hoff
2018-05-02
While long working hours seem to lead to impaired health, several studies have also shown that long working hours are related to lower levels of sickness absence. Previous studies on the relationship between long working hours and sickness absence have compared those who work long hours to those who do not, looking only at between-individual correlations. Those results might therefore reflect relatively stable differences between employees who typically work long hours and employees who typically do not. The aim of the present study is to examine within-individual correlations between long working hours and sickness absence. Records from the Human Resources department in a large Norwegian hospital from 2012 to 2015 provided objective data on both working hours and sickness absence. Two analyses were performed: a prospective cohort analysis to replicate the results from previous between-individual analyses and a second analysis of within-individual correlations using a fixed effect design. In line with existing research, both between-individual and within-individual analyses showed a negative relationship between long working hours (> 48 h/week) and short-term sickness absence (1-8 days) and no significant difference in incidence of long-term sickness absence (> 8 days). The results indicate that the negative relationship between long working hours and sickness absence is not due only to relatively stable individual differences between those who typically work long hours and those who do not. The results from both analyses therefore still contrast with previous research showing a negative relationship between long working hours and other health indicators.
DOT National Transportation Integrated Search
1994-12-01
This working paper is the fourth in a series to document analysis and results : from the 1990 MTC household travel survey. Previous working papers on the 1990 : travel survey covered survey design issues, sample weighting and expansion, and : trip li...
Managing a work-life balance: the experiences of midwives working in a group practice setting.
Fereday, Jennifer; Oster, Candice
2010-06-01
To explore how a group of midwives achieved a work-life balance working within a caseload model of care with flexible work hours and on-call work. in-depth interviews were conducted and the data were analysed using a data-driven thematic analysis technique. Children, Youth and Women's Health Service (CYWHS) (previously Women's and Children's Hospital), Adelaide, where a midwifery service known as Midwifery Group Practice (MGP) offers a caseload model of care to women within a midwife-managed unit. 17 midwives who were currently working, or had previously worked, in MGP. analysis of the midwives' individual experiences provided insight into how midwives managed the flexible hours and on-call work to achieve a sustainable work-life balance within a caseload model of care. it is important for midwives working in MGP to actively manage the flexibility of their role with time on call. Organisational, team and individual structure influenced how flexibility of hours was managed; however, a period of adjustment was required to achieve this balance. the study findings offer a description of effective, sustainable strategies to manage flexible hours and on-call work that may assist other midwives working in a similar role or considering this type of work setting. Copyright 2008 Elsevier Ltd. All rights reserved.
ERIC Educational Resources Information Center
Jones, C. M.; Green, J. P.; Higson, H. E.
2017-01-01
This study investigates whether the completion of an optional sandwich work placement enhances student performance in final year examinations. Using Propensity Score Matching, our analysis departs from the literature by controlling for self-selection. Previous studies may have overestimated the impact of sandwich work placements on performance…
Ramsauer, F
2001-12-01
This prevention concept offers a contribution to the expansion of the set of instruments for occupational safety and health protection within workplace prevention. The concept involves the multilateral analysis of work conditions. The utilized instruments include a strategy group, a survey, a health issue round table, and an analysis of work demands, and lead to synergy effects at the results level. Employees are drawn into the analysis of work conditions and workplace design solutions for the improvement of the work situation. The prevention concept was tested in a large company and its application established in practice. It was accepted by all participants, and the comparison with the previous situation (defined only through the analysis of work demands) demonstrated a significant improvement in health protection.
Calibration of work zone impact analysis software for Missouri.
DOT National Transportation Integrated Search
2013-12-01
This project calibrated two software programs used for estimating the traffic impacts of work zones. The WZ Spreadsheet : and VISSIM programs were recommended in a previous study by the authors. The two programs were calibrated using : field data fro...
Family Policies and Institutional Satisfaction: An Intersectional Analysis of Tenure-Track Faculty
ERIC Educational Resources Information Center
Schneller, Heather Lee
2012-01-01
Gender and faculty career advancement have been examined with a focus on academic work environment, including faculty workloads, mentoring relationships, access to research networks, and work-life balance. Previous studies concerned with gender, employment, and care work only have considered child care. Additionally, the exploration of faculty and…
A Theory of Electrical Conductivity of Pseudo-Binary Equivalent Molten Salt
NASA Astrophysics Data System (ADS)
Matsunaga, Shigeki; Koishi, Takahiro; Tamaki, Shigeru
2008-02-01
Many years ago, Sundheim proposed the "universal golden rule" by experiments, i.e. the ratio of the partial ionic conductivities in molten binary salt is equal to the inverse mass ratio of each ions, σ+/σ- = m-/m-. In the previous works, we have proved this relation by the theory using Langevin equation, and by molecular dynamics simulations (MD). In this study, the pseudo binary molten salt NaCl-KCl system is investigated in the same theoretical framework as previous works as the serial work in molten salts. The MD results are also reported in connection with the theoretical analysis.
Spain, Seth M; Miner, Andrew G; Kroonenberg, Pieter M; Drasgow, Fritz
2010-08-06
Questions about the dynamic processes that drive behavior at work have been the focus of increasing attention in recent years. Models describing behavior at work and research on momentary behavior indicate that substantial variation exists within individuals. This article examines the rationale behind this body of work and explores a method of analyzing momentary work behavior using experience sampling methods. The article also examines a previously unused set of methods for analyzing data produced by experience sampling. These methods are known collectively as multiway component analysis. Two archetypal techniques of multimode factor analysis, the Parallel factor analysis and the Tucker3 models, are used to analyze data from Miner, Glomb, and Hulin's (2010) experience sampling study of work behavior. The efficacy of these techniques for analyzing experience sampling data is discussed as are the substantive multimode component models obtained.
Professions and Working Conditions Associated With Community-Acquired Pneumonia.
Almirall, Jordi; Serra-Prat, Mateu; Bolíbar, Ignasi; Palomera, Elisabet; Roig, Jordi; Boixeda, Ramon; Bartolomé, Maria; de la Torre, Mari; Parra, Olga; Torres, Antoni
2015-12-01
Community-acquired pneumonia (CAP) is not considered a professional disease, and the effect of different occupations and working conditions on susceptibility to CAP is unknown. The aim of this study is to determine whether different jobs and certain working conditions are risk factors for CAP. Over a 1-year period, all radiologically confirmed cases of CAP (n=1,336) and age- and sex-matched controls (n=1,326) were enrolled in a population-based case-control study. A questionnaire on CAP risk factors, including work-related questions, was administered to all participants during an in-person interview. The bivariate analysis showed that office work is a protective factor against CAP, while building work, contact with dust and sudden changes of temperature in the workplace were risk factors for CAP. The occupational factor disappeared when the multivariate analysis was adjusted for working conditions. Contact with dust (previous month) and sudden changes of temperature (previous 3 months) were risk factors for CAP, irrespective of the number of years spent working in these conditions, suggesting reversibility. Some recent working conditions such as exposure to dust and sudden changes of temperature in the workplace are risk factors for CAP. Both factors are reversible and preventable. Copyright © 2014 SEPAR. Published by Elsevier Espana. All rights reserved.
A Dynamic Simulation of Musculoskeletal Function in the Mouse Hindlimb During Trotting Locomotion
Charles, James P.; Cappellari, Ornella; Hutchinson, John R.
2018-01-01
Mice are often used as animal models of various human neuromuscular diseases, and analysis of these models often requires detailed gait analysis. However, little is known of the dynamics of the mouse musculoskeletal system during locomotion. In this study, we used computer optimization procedures to create a simulation of trotting in a mouse, using a previously developed mouse hindlimb musculoskeletal model in conjunction with new experimental data, allowing muscle forces, activation patterns, and levels of mechanical work to be estimated. Analyzing musculotendon unit (MTU) mechanical work throughout the stride allowed a deeper understanding of their respective functions, with the rectus femoris MTU dominating the generation of positive and negative mechanical work during the swing and stance phases. This analysis also tested previous functional inferences of the mouse hindlimb made from anatomical data alone, such as the existence of a proximo-distal gradient of muscle function, thought to reflect adaptations for energy-efficient locomotion. The results do not strongly support the presence of this gradient within the mouse musculoskeletal system, particularly given relatively high negative net work output from the ankle plantarflexor MTUs, although more detailed simulations could test this further. This modeling analysis lays a foundation for future studies of the control of vertebrate movement through the development of neuromechanical simulations. PMID:29868576
Eyal-Altman, Noah; Last, Mark; Rubin, Eitan
2017-01-17
Numerous publications attempt to predict cancer survival outcome from gene expression data using machine-learning methods. A direct comparison of these works is challenging for the following reasons: (1) inconsistent measures used to evaluate the performance of different models, and (2) incomplete specification of critical stages in the process of knowledge discovery. There is a need for a platform that would allow researchers to replicate previous works and to test the impact of changes in the knowledge discovery process on the accuracy of the induced models. We developed the PCM-SABRE platform, which supports the entire knowledge discovery process for cancer outcome analysis. PCM-SABRE was developed using KNIME. By using PCM-SABRE to reproduce the results of previously published works on breast cancer survival, we define a baseline for evaluating future attempts to predict cancer outcome with machine learning. We used PCM-SABRE to replicate previous work that describe predictive models of breast cancer recurrence, and tested the performance of all possible combinations of feature selection methods and data mining algorithms that was used in either of the works. We reconstructed the work of Chou et al. observing similar trends - superior performance of Probabilistic Neural Network (PNN) and logistic regression (LR) algorithms and inconclusive impact of feature pre-selection with the decision tree algorithm on subsequent analysis. PCM-SABRE is a software tool that provides an intuitive environment for rapid development of predictive models in cancer precision medicine.
Nonlinear calculations of the time evolution of black hole accretion disks
NASA Technical Reports Server (NTRS)
Luo, C.
1994-01-01
Based on previous works on black hole accretion disks, I continue to explore the disk dynamics using the finite difference method to solve the highly nonlinear problem of time-dependent alpha disk equations. Here a radially zoned model is used to develop a computational scheme in order to accommodate functional dependence of the viscosity parameter alpha on the disk scale height and/or surface density. This work is based on the author's previous work on the steady disk structure and the linear analysis of disk dynamics to try to apply to x-ray emissions from black candidates (i.e., multiple-state spectra, instabilities, QPO's, etc.).
Modelling of thermal stresses in bearing steel structure generated by electrical current impulses
NASA Astrophysics Data System (ADS)
Birjukovs, M.; Jakovics, A.; Holweger, W.
2018-05-01
This work is the study of one particular candidate for white etching crack (WEC) initiation mechanism in wind turbine gearbox bearings: discharge current impulses flowing through bearing steel with associated thermal stresses and material fatigue. Using data/results from previously published works, the authors develop a series of models that are utilized to simulate these processes under various conditions/local microstructure configurations, as well as to verify the results of the previous numerical studies. Presented models show that the resulting stresses are several orders of magnitude below the fatigue limit/yield strength for the parameters used herein. Results and analysis of models provided by Scepanskis, M. et al. also indicate that certain effects predicted in their previous work resulted from a physically unfounded assumption about material thermodynamic properties and numerical model implementation issues.
NASA Astrophysics Data System (ADS)
Kravitz, K.; Furuya, M.; Mueller, K. J.
2013-12-01
The Needles District, in Canyonlands National Park in Utah exposes an array of actively creeping normal faults that accommodate gravity-driven extension above a plastically deforming substrate of evaporite deposits. Previous interferogram stacking and InSAR analysis of faults in the Needles District using 35 ERS satellite scenes from 1992 to 2002 showed line-of-sight deformation rates of ~1-2 mm/yr along active normal faults, with a wide strain gradient along the eastern margin of the deforming region. More rapid subsidence of ~2-2.5 mm/yr was also evident south of the main fault array across a broad platform bounded by the Colorado River and a single fault scarp to the south. In this study, time series analysis was performed on SAR scenes from Envisat, PALSAR, and ERS satellites ranging from 1992 to 2010 to expand upon previous results. Both persistent scatterer and small baseline methods were implemented using StaMPS. Preliminary results from Envisat data indicate equally distributed slip rates along the length of faults within the Needles District and very little subsidence in the broad region further southwest identified in previous work. A phase ramp that appears to be present within the initial interferograms creates uncertainty in the current analysis and future work is aimed at removing this artifact. Our new results suggest, however that a clear deformation signal is present along a number of large grabens in the northern part of the region at higher rates of up to 3-4 mm/yr. Little to no creep is evident along the single fault zone that bounds the southern Needles, in spite of the presence of a large and apparently active fault. This includes a segment of this fault that is instrumented by a creepmeter that yields slip rates on the order of ~1mm/yr. Further work using time series analysis and a larger sampling of SAR scenes will be used in an effort to determine why differences exist between previous and current work and to test mechanics-based modeling of extension in the region.
ERIC Educational Resources Information Center
Cowan, Nelson; Saults, J. Scott
2013-01-01
It is often proposed that individuals with high working memory span overcome proactive interference (PI) from previous trials, saving working memory for task-relevant items. We examined this hypothesis in word-list probe recognition. We found no difference in PI related to span. Instead, ex-Gaussian analysis of reaction time showed speed…
ERIC Educational Resources Information Center
Stakhovych, Stanislav; Bijmolt, Tammo H. A.; Wedel, Michel
2012-01-01
In this article, we present a Bayesian spatial factor analysis model. We extend previous work on confirmatory factor analysis by including geographically distributed latent variables and accounting for heterogeneity and spatial autocorrelation. The simulation study shows excellent recovery of the model parameters and demonstrates the consequences…
Prediction of axial limit capacity of stone columns using dimensional analysis
NASA Astrophysics Data System (ADS)
Nazaruddin A., T.; Mohamed, Zainab; Mohd Azizul, L.; Hafez M., A.
2017-08-01
Stone column is the most favorable method used by engineers in designing work for stabilization of soft ground for road embankment, and foundation for liquid structure. Easy installation and cheaper cost are among the factors that make stone column more preferable than other method. Furthermore, stone column also can acts as vertical drain to increase the rate of consolidation during preloading stage before construction work started. According to previous studied there are several parameters that influence the capacity of stone column. Among of them are angle friction of among the stones, arrangement of column (two pattern arrangement most applied triangular and square), spacing center to center between columns, shear strength of soil, and physical size of column (diameter and length). Dimensional analysis method (Buckingham-Pi Theorem) has used to carry out the new formula for prediction of load capacity stone columns. Experimental data from two previous studies was used for analysis of study.
Modeling spanwise nonuniformity in the cross-sectional analysis of composite beams
NASA Astrophysics Data System (ADS)
Ho, Jimmy Cheng-Chung
Spanwise nonuniformity effects are modeled in the cross-sectional analysis of beam theory. This modeling adheres to an established numerical framework on cross-sectional analysis of uniform beams with arbitrary cross-sections. This framework is based on two concepts: decomposition of the rotation tensor and the variational-asymptotic method. Allowance of arbitrary materials and geometries in the cross-section is from discretization of the warping field by finite elements. By this approach, dimensional reduction from three-dimensional elasticity is performed rigorously and the sectional strain energy is derived to be asymptotically-correct. Elastic stiffness matrices are derived for inputs into the global beam analysis. Recovery relations for the displacement, stress, and strain fields are also derived with care to be consistent with the energy. Spanwise nonuniformity effects appear in the form of pointwise and sectionwise derivatives, which are approximated by finite differences. The formulation also accounts for the effects of spanwise variations in initial twist and/or curvature. A linearly tapered isotropic strip is analyzed to demonstrate spanwise nonuniformity effects on the cross-sectional analysis. The analysis is performed analytically by the variational-asymptotic method. Results from beam theory are validated against solutions from plane stress elasticity. These results demonstrate that spanwise nonuniformity effects become significant as the rate at which the cross-sections vary increases. The modeling of transverse shear modes of deformation is accomplished by transforming the strain energy into generalized Timoshenko form. Approximations in this transformation procedure from previous works, when applied to uniform beams, are identified. The approximations are not used in the present work so as to retain more accuracy. Comparison of present results with those previously published shows that these approximations sometimes change the results measurably and thus are inappropriate. Static and dynamic results, from the global beam analysis, are calculated to show the differences between using stiffness constants from previous works and the present work. As a form of validation of the transformation procedure, calculations from the global beam analysis of initially twisted isotropic beams from using curvilinear coordinate axes featuring twist are shown to be equivalent to calculations using Cartesian coordinates.
Class, gender and time poverty: a time-use analysis of British workers' free time resources.
Chatzitheochari, Stella; Arber, Sara
2012-09-01
Free time, that is, the time that remains at one's own discretion after conducting daily work and personal care activities, has been previously recognized as a 'primary good' and an important welfare resource that provides opportunities for participation in social life and leisure. However, recent years have witnessed an increasing preoccupation with the phenomenon of time poverty, drawing attention to the distribution of free time and its relationship to structural and family circumstances. In this article we propose a novel approach to the measurement of time poverty and document its occurrence amongst British workers. In line with previous literature, a conceptualization of time poverty as a relative lack of free time resources vis-à-vis other members of the community is adopted. However, unlike previous empirical studies, we investigate the differential configuration of time poverty on weekdays and weekend days, alongside indicators of the quality of free time, taking into account insights from theoretical and empirical work within the field of the sociology of time. Our analysis of the 2000 UK Time Use Survey highlights class and gender inequalities that have been missed by previous measurement approaches and demonstrates that, overall, working women experience multiple and more severe free time constraints, which may constitute an additional barrier for their leisure and social participation. © London School of Economics and Political Science 2012.
Domestic Work and the Wage Penalty for Motherhood in West Germany
ERIC Educational Resources Information Center
Kuhhirt, Michael; Ludwig, Volker
2012-01-01
Previous research suggests that household tasks prohibit women from unfolding their full earning potential by depleting their work effort and limiting their time flexibility. The present study investigated whether this relationship can explain the wage gap between mothers and nonmothers in West Germany. The empirical analysis applied fixed-effects…
Fulton, Lawrence; Kerr, Bernie; Inglis, James M; Brooks, Matthew; Bastian, Nathaniel D
2015-07-01
In this study, we re-evaluate air ambulance requirements (rules of allocation) and planning considerations based on an Army-approved, Theater Army Analysis scenario. A previous study using workload only estimated a requirement of 0.4 to 0.6 aircraft per admission, a significant bolus over existence-based rules. In this updated study, we estimate requirements for Phase III (major combat operations) using a simulation grounded in previously published work and Phase IV (stability operations) based on four rules of allocation: unit existence rules, workload factors, theater structure (geography), and manual input. This study improves upon previous work by including the new air ambulance mission requirements of Department of Defense 51001.1, Roles and Functions of the Services, by expanding the analysis over two phases, and by considering unit rotation requirements known as Army Force Generation based on Department of Defense policy. The recommendations of this study are intended to inform future planning factors and already provided decision support to the Army Aviation Branch in determining force structure requirements. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.
Illias, Hazlee Azil; Chai, Xin Rui; Abu Bakar, Ab Halim; Mokhlis, Hazlie
2015-01-01
It is important to predict the incipient fault in transformer oil accurately so that the maintenance of transformer oil can be performed correctly, reducing the cost of maintenance and minimise the error. Dissolved gas analysis (DGA) has been widely used to predict the incipient fault in power transformers. However, sometimes the existing DGA methods yield inaccurate prediction of the incipient fault in transformer oil because each method is only suitable for certain conditions. Many previous works have reported on the use of intelligence methods to predict the transformer faults. However, it is believed that the accuracy of the previously proposed methods can still be improved. Since artificial neural network (ANN) and particle swarm optimisation (PSO) techniques have never been used in the previously reported work, this work proposes a combination of ANN and various PSO techniques to predict the transformer incipient fault. The advantages of PSO are simplicity and easy implementation. The effectiveness of various PSO techniques in combination with ANN is validated by comparison with the results from the actual fault diagnosis, an existing diagnosis method and ANN alone. Comparison of the results from the proposed methods with the previously reported work was also performed to show the improvement of the proposed methods. It was found that the proposed ANN-Evolutionary PSO method yields the highest percentage of correct identification for transformer fault type than the existing diagnosis method and previously reported works.
2015-01-01
It is important to predict the incipient fault in transformer oil accurately so that the maintenance of transformer oil can be performed correctly, reducing the cost of maintenance and minimise the error. Dissolved gas analysis (DGA) has been widely used to predict the incipient fault in power transformers. However, sometimes the existing DGA methods yield inaccurate prediction of the incipient fault in transformer oil because each method is only suitable for certain conditions. Many previous works have reported on the use of intelligence methods to predict the transformer faults. However, it is believed that the accuracy of the previously proposed methods can still be improved. Since artificial neural network (ANN) and particle swarm optimisation (PSO) techniques have never been used in the previously reported work, this work proposes a combination of ANN and various PSO techniques to predict the transformer incipient fault. The advantages of PSO are simplicity and easy implementation. The effectiveness of various PSO techniques in combination with ANN is validated by comparison with the results from the actual fault diagnosis, an existing diagnosis method and ANN alone. Comparison of the results from the proposed methods with the previously reported work was also performed to show the improvement of the proposed methods. It was found that the proposed ANN-Evolutionary PSO method yields the highest percentage of correct identification for transformer fault type than the existing diagnosis method and previously reported works. PMID:26103634
Behaviour State Analysis in Rett Syndrome: Continuous Data Reliability Measurement
ERIC Educational Resources Information Center
Woodyatt, Gail; Marinac, Julie; Darnell, Ross; Sigafoos, Jeff; Halle, James
2004-01-01
Awareness of optimal behaviour states of children with profound intellectual disability has been reported in the literature as a potentially useful tool for planning intervention within this population. Some arguments have been raised, however, which question the reliability and validity of previously published work on behaviour state analysis.…
Availability analysis of an HTGR fuel recycle facility. Summary report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sharmahd, J.N.
1979-11-01
An availability analysis of reprocessing systems in a high-temperature gas-cooled reactor (HTGR) fuel recycle facility was completed. This report summarizes work done to date to define and determine reprocessing system availability for a previously planned HTGR recycle reference facility (HRRF). Schedules and procedures for further work during reprocessing development and for HRRF design and construction are proposed in this report. Probable failure rates, transfer times, and repair times are estimated for major system components. Unscheduled down times are summarized.
Informal Peer-Assisted Learning Groups Did Not Lead to Better Performance of Saudi Dental Students.
AbdelSalam, Maha; El Tantawi, Maha; Al-Ansari, Asim; AlAgl, Adel; Al-Harbi, Fahad
2017-01-01
To describe peer-assisted learning (PAL) groups formed by dental undergraduate students in a biomedical course and to investigate the association of individual and group characteristics with academic performance. In 2015, 92 fourth-year students (43 males and 49 females) in the College of Dentistry, University of Dammam, Saudi Arabia, were invited to form PAL groups to study a unit of a biomedical course. An examination was used to assess their knowledge after 2 weeks. In addition, a questionnaire and social network analysis were used to investigate (1) individual student attributes: gender, role, subject matter knowledge, grade in previous year, teaming with friends, previous communication with teammates, and content discussion, and (2) group attributes: group teacher's previous grade, number of colleagues with whom a student connected, teaming with friends, similarity of teammates' previous grades, and teacher having higher previous grades than other teammates. Regression analysis was used to assess the association of examination scores with individual and group attributes. The response rate was 80.4% (74 students: 36 males and 38 females). Students who previously scored grades A and B had higher examination scores than students with grades C/less (regression coefficient = 18.50 and 13.39) within the groups. Higher scores were not associated with working in groups including friends only (regression coefficient = 1.17) or when all students had similar previous grades (regression coefficient = 0.85). Students with previous high grades benefited to a greater extent from working in PAL groups. Similarity of teammates in PAL groups was not associated with better scores. © 2017 S. Karger AG, Basel.
Operation, Modeling and Analysis of the Reverse Water Gas Shift Process
NASA Technical Reports Server (NTRS)
Whitlow, Jonathan E.
2001-01-01
The Reverse Water Gas Shift process is a candidate technology for water and oxygen production on Mars under the In-Situ Propellant Production project. This report focuses on the operation and analysis of the Reverse Water Gas Shift (RWGS) process, which has been constructed at Kennedy Space Center. A summary of results from the initial operation of the RWGS, process along with an analysis of these results is included in this report. In addition an evaluation of a material balance model developed from the work performed previously under the summer program is included along with recommendations for further experimental work.
Radiolysis Model Sensitivity Analysis for a Used Fuel Storage Canister
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wittman, Richard S.
2013-09-20
This report fulfills the M3 milestone (M3FT-13PN0810027) to report on a radiolysis computer model analysis that estimates the generation of radiolytic products for a storage canister. The analysis considers radiolysis outside storage canister walls and within the canister fill gas over a possible 300-year lifetime. Previous work relied on estimates based directly on a water radiolysis G-value. This work also includes that effect with the addition of coupled kinetics for 111 reactions for 40 gas species to account for radiolytic-induced chemistry, which includes water recombination and reactions with air.
Work-Life and Well-Being in U.K. Therapeutic Prison Officers: A Thematic Analysis.
Walker, Emma J; Egan, Helen H; Jackson, Craig A; Tonkin, Matthew
2018-06-01
Previous research has clearly demonstrated the positive impact of therapeutic interventions on offenders' well-being. Much less is known about the impact on prison staff facilitating and delivering such interventions. We employed qualitative methodology to capture a deeper understanding of the work of therapeutic prison officers. Seven prison officers working in a U.K. Category B therapeutic community prison were interviewed about their working lives, including their own participation in therapy. Following a thematic analysis approach, key findings indicated that the physical and cultural work environment was very important to staff; the therapeutic element of their job role, although demanding, was both satisfying and rewarding; and that working in a therapeutic prison environment provided the opportunity for personal as well as professional development. We conclude that further attention should be given to the unique nature of therapeutic prison work and the positive impact it can have on well-being at work.
Integrated Formulation of Beacon-Based Exception Analysis for Multimissions
NASA Technical Reports Server (NTRS)
Mackey, Ryan; James, Mark; Park, Han; Zak, Mickail
2003-01-01
Further work on beacon-based exception analysis for multimissions (BEAM), a method of real-time, automated diagnosis of a complex electromechanical systems, has greatly expanded its capability and suitability of application. This expanded formulation, which fully integrates physical models and symbolic analysis, is described. The new formulation of BEAM expands upon previous advanced techniques for analysis of signal data, utilizing mathematical modeling of the system physics, and expert-system reasoning,
Colarusso, Calvin A
2006-01-01
The four-year analysis of Mr. T, a highly intelligent, successful professional who entered analysis primarily because of a depression is presented; he had had no previous therapeutic experience but was very curious about analysis. The analytic work led to the discovery of a deeply held unconscious conviction of premature death that was related to interaction among the effects of a traumatic parental divorce during childhood, estrangement from both parents prior to their deaths, and signs of aging and illness in midlife. Before this analytic work the patient was unable to conceptualize, let alone plan for, late-life developmental experiences such as retirement and grandparenthood. Transference-countertransference themes are discussed, as is the importance of an understanding of midlife developmental concepts to successful analytic work with patients in this age group.
Factors That Promote Innovativeness and Being an Innovative Learner at Work--Results from PIAAC
ERIC Educational Resources Information Center
Støren, Liv Anne
2016-01-01
In this article, innovative activity is considered in the light of broader conceptualisations of innovativeness and what it means to be innovative. Central to the definition of innovativeness used in the analysis is that the worker actively seeks new knowledge and uses it for work-related tasks. This is based on previous research emphasising…
ERIC Educational Resources Information Center
Poell, Rob F.; Yorks, Lyle; Marsick, Victoria J.
2009-01-01
The authors describe research aimed at developing a more comprehensive framework for project-based learning in work contexts. This grows out of a cross-cultural reanalysis of data from two previous studies using two different frameworks: actor-centered learning network theory and a critical pragmatist lens on action reflection learning. Findings…
A Hop-Count Analysis Scheme for Avoiding Wormhole Attacks in MANET
Jen, Shang-Ming; Laih, Chi-Sung; Kuo, Wen-Chung
2009-01-01
MANET, due to the nature of wireless transmission, has more security issues compared to wired environments. A specific type of attack, the Wormhole attack does not require exploiting any nodes in the network and can interfere with the route establishment process. Instead of detecting wormholes from the role of administrators as in previous methods, we implement a new protocol, MHA, using a hop-count analysis from the viewpoint of users without any special environment assumptions. We also discuss previous works which require the role of administrator and their reliance on impractical assumptions, thus showing the advantages of MHA. PMID:22408566
Occupied Volume Integrity Testing : Elastic Test Results and Analyses
DOT National Transportation Integrated Search
2011-09-21
Federal Railroad Administration (FRA) and the Volpe Center have been conducting research into developing an alternative method of demonstrating occupied volume integrity (OVI) through a combination of testing and analysis. Previous works have been pu...
Why People Choose to Teach in Urban Schools: The Case for a Push-Pull Factor Analysis
ERIC Educational Resources Information Center
Knell, Paul F.; Castro, Antonio J.
2014-01-01
This qualitative research study traces the motivations for teaching of 13 teacher candidates enrolled in an urban-based alternative certification program. After using a push-pull factor analysis, the data suggest that most participants left their previous careers due to financial shortcomings or work instability. As a result, these participants…
Transcription Analysis of the Myometrium of Labouring and Non-Labouring Women
Hutchinson, James L.; Hibbert, Nanette; Freeman, Tom C.; Saunders, Philippa T. K.; Norman, Jane E.
2016-01-01
An incomplete understanding of the molecular mechanisms that initiate normal human labour at term seriously hampers the development of effective ways to predict, prevent and treat disorders such as preterm labour. Appropriate analysis of large microarray experiments that compare gene expression in non-labouring and labouring gestational tissues is necessary to help bridge these gaps in our knowledge. In this work, gene expression in 48 (22 labouring, 26 non-labouring) lower-segment myometrial samples collected at Caesarean section were analysed using Illumina HT-12 v4.0 BeadChips. Normalised data were compared between labouring and non-labouring groups using traditional statistical methods and a novel network graph approach. We sought technical validation with quantitative real-time PCR, and biological replication through inverse variance-weighted meta-analysis with published microarray data. We have extended the list of genes suggested to be associated with labour: Compared to non-labouring samples, labouring samples showed apparent higher expression at 960 probes (949 genes) and apparent lower expression at 801 probes (789 genes) (absolute fold change ≥1.2, rank product percentage of false positive value (RP-PFP) <0.05). Although half of the women in the labouring group had received pharmaceutical treatment to induce or augment labour, sensitivity analysis suggested that this did not confound our results. In agreement with previous studies, functional analysis suggested that labour was characterised by an increase in the expression of inflammatory genes and network analysis suggested a strong neutrophil signature. Our analysis also suggested that labour is characterised by a decrease in the expression of muscle-specific processes, which has not been explicitly discussed previously. We validated these findings through the first formal meta-analysis of raw data from previous experiments and we hypothesise that this represents a change in the composition of myometrial tissue at labour. Further work will be necessary to reveal whether these results are solely due to leukocyte infiltration into the myometrium as a mechanism initiating labour, or in addition whether they also represent gene changes in the myocytes themselves. We have made all our data available at www.ebi.ac.uk/arrayexpress/ (accession number E-MTAB-3136) to facilitate progression of this work. PMID:27176052
Prognostic Value of RUNX1 Mutations in AML: A Meta-Analysis
Jalili, Mahdi; Yaghmaie, Marjan; Ahmadvand, Mohammad; Alimoghaddam, Kamran; Mousavi, Seyed Asadollah; Vaezi, Mohammad; Ghavamzadeh, Ardeshir
2018-02-26
The RUNX1 (AML1) gene is a relatively infrequent mutational target in cases of acute myeloid leukemia (AML). Previous work indicated that RUNX1 mutations can have pathological and prognostic implications. To evaluate prognostic value, we conducted a meta-analysis of 4 previous published works with data for survival according to RUNX1 mutation status. Pooled hazard ratios for overall survival and disease-free survival were 1.55 (95% confidence interval (CI) = 1.11–2.15; p-value = 0.01) and 1.76 (95% CI = 1.24–2.52; p-value = 0.002), respectively, for cases positive for RUNX1 mutations. This evidence supports clinical implications of RUNX1 mutations in the development and progression of AML cases and points to the possibility of a distinct category within the newer WHO classification. Though it must be kept in mind that the present work was based on data extracted from observational studies, the findings suggest that the RUNX1 status can contribute to risk-stratification and decision-making in management of AML. Creative Commons Attribution License
Student pharmacists’ career choices: a survey of three Nigerian schools of pharmacy
Ubaka, Chukwuemeka M.; Ochie, Uche M.; Adibe, Maxwell O.
Background There is little data on the preferences of pharmacy students as regards their future pharmacy job choices in Africa and this has created concerns amongst licensing bodies, employers and also the institutions they graduate from. Objective Career choices and factors that influence these choices of pre-registration pharmacists were assessed. Methods Final and fourth year students from three schools of pharmacy were approached with a previously validated and employed questionnaire comprising questions on future job choices and reasons for that job choice. Data collected were subjected to descriptive and inferential analysis. Results Four hundred and eighty eight students took part in the study (response rate 71.5%). Majority (78.8%) was younger than 26 years and had a work experience (68.2%). Job flexibility was significantly more important to females, while younger students considered salary most important (p<0.05). Hospital and community practice were most preferred career choices. Other demographic factors (especially gender, marital status, previous degree and previous work experience) significantly affected career choices. Conclusions Age, gender, and previous work experience affect career choices of graduating pharmacy students. Patient-oriented practices (e.g. hospital and community) remain the most preferred careers. PMID:24223080
Performance Analysis: Work Control Events Identified January - August 2010
DOE Office of Scientific and Technical Information (OSTI.GOV)
De Grange, C E; Freeman, J W; Kerr, C E
2011-01-14
This performance analysis evaluated 24 events that occurred at LLNL from January through August 2010. The analysis identified areas of potential work control process and/or implementation weaknesses and several common underlying causes. Human performance improvement and safety culture factors were part of the causal analysis of each event and were analyzed. The collective significance of all events in 2010, as measured by the occurrence reporting significance category and by the proportion of events that have been reported to the DOE ORPS under the ''management concerns'' reporting criteria, does not appear to have increased in 2010. The frequency of reporting inmore » each of the significance categories has not changed in 2010 compared to the previous four years. There is no change indicating a trend in the significance category and there has been no increase in the proportion of occurrences reported in the higher significance category. Also, the frequency of events, 42 events reported through August 2010, is not greater than in previous years and is below the average of 63 occurrences per year at LLNL since 2006. Over the previous four years, an average of 43% of the LLNL's reported occurrences have been reported as either ''management concerns'' or ''near misses.'' In 2010, 29% of the occurrences have been reported as ''management concerns'' or ''near misses.'' This rate indicates that LLNL is now reporting fewer ''management concern'' and ''near miss'' occurrences compared to the previous four years. From 2008 to the present, LLNL senior management has undertaken a series of initiatives to strengthen the work planning and control system with the primary objective to improve worker safety. In 2008, the LLNL Deputy Director established the Work Control Integrated Project Team to develop the core requirements and graded elements of an institutional work planning and control system. By the end of that year this system was documented and implementation had begun. In 2009, training of the workforce began and as of the time of this report more than 50% of authorized Integration Work Sheets (IWS) use the activity-based planning process. In 2010, LSO independently reviewed the work planning and control process and confirmed to the Laboratory that the Integrated Safety Management (ISM) System was implemented. LLNL conducted a cross-directorate management self-assessment of work planning and control and is developing actions to respond to the issues identified. Ongoing efforts to strengthen the work planning and control process and to improve the quality of LLNL work packages are in progress: completion of remaining actions in response to the 2009 DOE Office of Health, Safety, and Security (HSS) evaluation of LLNL's ISM System; scheduling more than 14 work planning and control self-assessments in FY11; continuing to align subcontractor work control with the Institutional work planning and control system; and continuing to maintain the electronic IWS application. The 24 events included in this analysis were caused by errors in the first four of the five ISMS functions. The most frequent cause was errors in analyzing the hazards (Function 2). The second most frequent cause was errors occurring when defining the work (Function 1), followed by errors during the performance of work (Function 4). Interestingly, very few errors in developing controls (Function 3) resulted in events. This leads one to conclude that if improvements are made to defining the scope of work and analyzing the potential hazards, LLNL may reduce the frequency or severity of events. Analysis of the 24 events resulted in the identification of ten common causes. Some events had multiple causes, resulting in the mention of 39 causes being identified for the 24 events. The most frequent cause was workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete. The second most frequent cause was unclear, incomplete or confusing documents directing the work. Together, these two causes were mentioned 17 times and contributed to 13 of the events. All of the events with the cause of ''workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete'' had this error in the first two ISMS functions: define the work and analyze the hazard. This means that these causes result in the scope of work being ill-defined or the hazard(s) improperly analyzed. Incomplete implementation of these functional steps leads to the hazards not being controlled. The causes are then manifested in events when the work is conducted. The process to operate safely relies on accurately defining the scope of work. This review has identified a number of examples of latent organizational weakness in the execution of work control processes.« less
Risk and risk management for Australian sex workers.
Harris, Margaret; Nilan, Pam; Kirby, Emma
2011-03-01
In this article, we address the experiences of female sex workers in urban Australia through analysis of interviews using a feminist approach. Although many previous studies have been conducted, our focus was on the voices of sex workers in an area that was rapidly gentrifying, leading to local community tensions. Intensive analysis of interview transcripts was employed to derive thematic codes for understanding how the women viewed and managed everyday risk in sex work. They were well aware of the health risks associated with sex work. For women working on premises, domain separation between sex work and other life domains was an important management strategy for maintaining self-esteem. For women working on the street, instincts honed by years of dangerous work provided a measure of safety. Our findings have implications for health and other agencies dealing with sex workers in situations in which community pressure is exerted to move sex workers away from the area.
Read, Gemma J M; Salmon, Paul M; Lenné, Michael G; Stanton, Neville A
2016-03-01
Pedestrian fatalities at rail level crossings (RLXs) are a public safety concern for governments worldwide. There is little literature examining pedestrian behaviour at RLXs and no previous studies have adopted a formative approach to understanding behaviour in this context. In this article, cognitive work analysis is applied to understand the constraints that shape pedestrian behaviour at RLXs in Melbourne, Australia. The five phases of cognitive work analysis were developed using data gathered via document analysis, behavioural observation, walk-throughs and critical decision method interviews. The analysis demonstrates the complex nature of pedestrian decision making at RLXs and the findings are synthesised to provide a model illustrating the influences on pedestrian decision making in this context (i.e. time, effort and social pressures). Further, the CWA outputs are used to inform an analysis of the risks to safety associated with pedestrian behaviour at RLXs and the identification of potential interventions to reduce risk. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.
NASA Astrophysics Data System (ADS)
Rezaei, M. P.; Zamanian, M.
2017-01-01
In this paper, the influences of nonideal boundary conditions (due to flexibility) on the primary resonant behavior of a piezoelectrically actuated microbeam have been studied, for the first time. The structure has been assumed to treat as an Euler-Bernoulli beam, considering the effects of geometric nonlinearity. In this work, the general nonideal supports have been modeled as a the combination of horizontal, vertical and rotational springs, simultaneously. Allocating particular values to the stiffness of these springs provides the mathematical models for the majority of boundary conditions. This consideration leads to use a two-dimensional analysis of the multiple scales method instead of previous works' method (one-dimensional analysis). If one neglects the nonideal effects, then this paper would be an effort to solve the two-dimensional equations of motion without a need of a combination of these equations using the shortening or stretching effect. Letting the nonideal effects equal to zero and comparing their results with the results of previous approaches have been demonstrated the accuracy of the two-dimensional solutions. The results have been identified the unique effects of constraining and stiffening of boundaries in horizontal, vertical and rotational directions. This means that it is inaccurate to suppose the nonideality of supports only in one or two of these directions like as previous works. The findings are of vital importance as a better prediction of the frequency response for the nonideal supports. Furthermore, the main findings of this effort can help to choose appropriate boundary conditions for desired systems.
NASA Astrophysics Data System (ADS)
Brawner, Erik
Earth's surface movement may cause as a potential hazard to infrastructure and people. Associated earthquake hazards pose a potential side effect of geothermal activity. Modern remote sensing techniques known as Interferometric Synthetic Aperture Radar (InSAR) can measure surface change with a high degree of precision to mm scale movements. Previous work has identified a deformation anomaly within the Coso Geothermal site in eastern California. Surface changes have not been analyzed since the 1990s, allowing a decade of geothermal production impact to occur since previously assessed. In this study, InSAR data was acquired and analyzed between the years 2005 and 2010. Acquired by the ENVISAT satellite from both ascending and descending modes. This provides an independent dataset from previous work. Incorporating data generated from a new sensor covering a more modern temporal study period. Analysis of this time period revealed a subsidence anomaly in correlation with the extents of the geothermal production area under current operation. Maximum subsidence rates in the region reached approximately 3.8 cm/yr. A similar rate assessed from previous work throughout the 1990s. The correlation of subsidence patterns suggests a linear source of deformation from measurements spanning multiple decades. Regions of subsidence branch out from the main anomaly to the North-Northeast and to the South where additional significant peaks of subsidence occurring. The extents of the deformation anomaly directly correlate with the dispersal of geothermal production well site locations. Depressurization within the geothermal system provides a leading cause to surface subsidence from excessive extraction of hydrothermal fluids. As a result of minimal reinjection of production fluids.
NASA Astrophysics Data System (ADS)
Surblys, Donatas; Leroy, Frédéric; Yamaguchi, Yasutaka; Müller-Plathe, Florian
2018-04-01
We investigated the solid-liquid work of adhesion of water on a model silica surface by molecular dynamics simulations, where a methodology previously developed to determine the work of adhesion through thermodynamic integration was extended to a system with long-range electrostatic interactions between solid and liquid. In agreement with previous studies, the work of adhesion increased when the magnitude of the surface polarity was increased. On the other hand, we found that when comparing two systems with and without solid-liquid electrostatic interactions, which were set to have approximately the same total solid-liquid interfacial energy, former had a significantly smaller work of adhesion and a broader distribution in the interfacial energies, which has not been previously reported in detail. This was explained by the entropy contribution to the adhesion free energy; i.e., the former with a broader energy distribution had a larger interfacial entropy than the latter. While the entropy contribution to the work of adhesion has already been known, as a work of adhesion itself is free energy, these results indicate that, contrary to common belief, wetting behavior such as the contact angle is not only governed by the interfacial energy but also significantly affected by the interfacial entropy. Finally, a new interpretation of interfacial entropy in the context of solid-liquid energy variance was offered, from which a fast way to qualitatively estimate the work of adhesion was also presented.
Sullivan, Barbara Stevens
2007-02-01
A long term, intensive analysis with a woman in old old age is reported. An attempt is made to answer the question, 'What, in analytic work, is healing?'. The patient's previous classical Jungian work is contrasted with the author's developmental perspective. It is suggested that an enactment, representing what Neville Symington has called an analyst's act of freedom, was crucial in effecting a profound transformation in the patient's psyche.
Carlson, Elisabeth; Idvall, Ewa
2015-07-01
The aging population is a globally recognized challenge for the health care service. The growing number of older people will probably lead to increased demands for nurses working in elderly care. Clinical practice has been shown to have an impact on how student nurses perceive a particular field of nursing. To compare perceptions of the clinical learning environment in nursing homes among students considering a career in aged care or not, and to examine the difference in age, gender and previous working experience as health care assistants in elderly care between the two groups. This was a cross-sectional study using the Swedish version of the Clinical Learning Environment and Nurse Teacher evaluation scale. Consecutive sampling was performed over three semesters from September 2011 to December 2012. The survey was conducted with 183 student nurses. Mann-Whitney U-test was used to examine differences in relation to two groups namely student nurses who did or did not consider to work in elderly care. A chi-square test of independence was performed to examine the difference in age, gender and previous working experience between the two groups. The analysis leaned towards an overall positive evaluation of the clinical learning environment with more positive values for students considering a career. There were no significant differences between younger students (18-23) and older students (24-50) regarding willingness to work in elderly care or not. Neither was any significant difference displayed between students, based on gender nor for previous work experience. Age, gender and previous work experiences as health care assistants did not impact on students' willingness to work in elderly care. Future studies need to acknowledge the complexity of why student nurses choose a particular pathway in nursing by longitudinal studies following cohorts of students during the course of the nursing programme. Copyright © 2015 Elsevier Ltd. All rights reserved.
Determination of Realistic Fire Scenarios in Spacecraft
NASA Technical Reports Server (NTRS)
Dietrich, Daniel L.; Ruff, Gary A.; Urban, David
2013-01-01
This paper expands on previous work that examined how large a fire a crew member could successfully survive and extinguish in the confines of a spacecraft. The hazards to the crew and equipment during an accidental fire include excessive pressure rise resulting in a catastrophic rupture of the vehicle skin, excessive temperatures that burn or incapacitate the crew (due to hyperthermia), carbon dioxide build-up or accumulation of other combustion products (e.g. carbon monoxide). The previous work introduced a simplified model that treated the fire primarily as a source of heat and combustion products and sink for oxygen prescribed (input to the model) based on terrestrial standards. The model further treated the spacecraft as a closed system with no capability to vent to the vacuum of space. The model in the present work extends this analysis to more realistically treat the pressure relief system(s) of the spacecraft, include more combustion products (e.g. HF) in the analysis and attempt to predict the fire spread and limiting fire size (based on knowledge of terrestrial fires and the known characteristics of microgravity fires) rather than prescribe them in the analysis. Including the characteristics of vehicle pressure relief systems has a dramatic mitigating effect by eliminating vehicle overpressure for all but very large fires and reducing average gas-phase temperatures.
A cluster analysis investigation of workaholism as a syndrome.
Aziz, Shahnaz; Zickar, Michael J
2006-01-01
Workaholism has been conceptualized as a syndrome although there have been few tests that explicitly consider its syndrome status. The authors analyzed a three-dimensional scale of workaholism developed by Spence and Robbins (1992) using cluster analysis. The authors identified three clusters of individuals, one of which corresponded to Spence and Robbins's profile of the workaholic (high work involvement, high drive to work, low work enjoyment). Consistent with previously conjectured relations with workaholism, individuals in the workaholic cluster were more likely to label themselves as workaholics, more likely to have acquaintances label them as workaholics, and more likely to have lower life satisfaction and higher work-life imbalance. The importance of considering workaholism as a syndrome and the implications for effective interventions are discussed. Copyright 2006 APA.
[Study on empowerment factors for career continuity of hospital nurses].
Kato, Hirosato; Ito, Yukie; Yoshida, Aki; Mizuno, Shizue; Ogoshi, Kumiko; Imamura, Tomoaki
2015-01-01
The resignation rate of nurses working in hospitals is extremely high. This study aims to identify both the factors related to the resignation of nurses and the empowerment factors supporting their job retention. In 2011 we conducted a Web-based questionnaire survey of nurses with less than 10 years of working experience. There were 25 survey items including the following reasons for choosing the current employment position, intention of continuing work, sense of fulfillment and the presence or absence of problems in the current workplace. In addition, nurses who previously had resigned were asked why they left their last workplace. The reasons why they chose the current workplace were markedly different between the not-resigned (A group) and previously resigned (B group) nurses. As a result of cluster analysis, the reasons for resignation were classified into six clusters; "overwork", "burnout", "bad atmosphere", "work life balance factors", "working conditions" and "marriage". In this study, it is shown that there is a positive correlation between the sense of fulfillment at work and the intention to do research work. It is suggested that encouragement of nurses to undertake research work is one of the empowerment factors supporting their job retention.
Multiscale modelling and analysis of collective decision making in swarm robotics.
Vigelius, Matthias; Meyer, Bernd; Pascoe, Geoffrey
2014-01-01
We present a unified approach to describing certain types of collective decision making in swarm robotics that bridges from a microscopic individual-based description to aggregate properties. Our approach encompasses robot swarm experiments, microscopic and probabilistic macroscopic-discrete simulations as well as an analytic mathematical model. Following up on previous work, we identify the symmetry parameter, a measure of the progress of the swarm towards a decision, as a fundamental integrated swarm property and formulate its time evolution as a continuous-time Markov process. Contrary to previous work, which justified this approach only empirically and a posteriori, we justify it from first principles and derive hard limits on the parameter regime in which it is applicable.
Macroscopic relationship in primal-dual portfolio optimization problem
NASA Astrophysics Data System (ADS)
Shinzato, Takashi
2018-02-01
In the present paper, using a replica analysis, we examine the portfolio optimization problem handled in previous work and discuss the minimization of investment risk under constraints of budget and expected return for the case that the distribution of the hyperparameters of the mean and variance of the return rate of each asset are not limited to a specific probability family. Findings derived using our proposed method are compared with those in previous work to verify the effectiveness of our proposed method. Further, we derive a Pythagorean theorem of the Sharpe ratio and macroscopic relations of opportunity loss. Using numerical experiments, the effectiveness of our proposed method is demonstrated for a specific situation.
A Re-examination of the Black English Copula. Working Papers in Sociolinguistics, No. 66.
ERIC Educational Resources Information Center
Baugh, John
A corpus of Black English (BEV) data is re-examined with exclusive attention to the "is" form of the copula. This analysis differs from previous examinations in that more constraints have been introduced, and the Cedergren/Sankoff computer program for multivariant analysis has been employed. The analytic techniques that are used allow for a finer…
DOT National Transportation Integrated Search
2013-10-01
In this work, a previously-developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, a...
DOT National Transportation Integrated Search
2013-10-01
In this work, a previously developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation : system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types,...
DOT National Transportation Integrated Search
2013-10-01
In this work, a previously developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, a...
Statistical Analysis of CFD Solutions From the Fifth AIAA Drag Prediction Workshop
NASA Technical Reports Server (NTRS)
Morrison, Joseph H.
2013-01-01
A graphical framework is used for statistical analysis of the results from an extensive N-version test of a collection of Reynolds-averaged Navier-Stokes computational fluid dynamics codes. The solutions were obtained by code developers and users from North America, Europe, Asia, and South America using a common grid sequence and multiple turbulence models for the June 2012 fifth Drag Prediction Workshop sponsored by the AIAA Applied Aerodynamics Technical Committee. The aerodynamic configuration for this workshop was the Common Research Model subsonic transport wing-body previously used for the 4th Drag Prediction Workshop. This work continues the statistical analysis begun in the earlier workshops and compares the results from the grid convergence study of the most recent workshop with previous workshops.
Optical spectroscopy of laser-produced plasmas for standoff isotopic analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harilal, Sivanandan S.; Brumfield, Brian E.; LaHaye, Nicole L.
2018-04-20
This review article covers the present status of isotope detection through emission, absorption, and fluorescence spectroscopy of atoms and molecules in a laser-produced plasma formed from a solid sample. A description of the physics behind isotope shifts in atoms and molecules is presented, followed by the physics behind solid sampling of laser ablation plumes, optical methods for isotope measurements, the suitable physical conditions of laser-produced plasma plumes for isotopic analysis, and the current status. Finally, concluding remarks will be made on the existing gaps between previous works in the literature and suggestions for future work.
Optical spectroscopy of laser-produced plasmas for standoff isotopic analysis
Harilal, S. S.; Brumfield, B. E.; LaHaye, N. L.; ...
2018-04-20
This review article covers the present status of isotope detection through emission, absorption, and fluorescence spectroscopy of atoms and molecules in a laser-produced plasma formed from a solid sample. A description of the physics behind isotope shifts in atoms and molecules is presented, followed by the physics behind solid sampling of laser ablation plumes, optical methods for isotope measurements, the suitable physical conditions of laser-produced plasma plumes for isotopic analysis, and the current status. Lastly, concluding remarks will be made on the existing gaps between previous works in the literature and suggestions for future work.
Optical spectroscopy of laser-produced plasmas for standoff isotopic analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harilal, S. S.; Brumfield, B. E.; LaHaye, N. L.
This review article covers the present status of isotope detection through emission, absorption, and fluorescence spectroscopy of atoms and molecules in a laser-produced plasma formed from a solid sample. A description of the physics behind isotope shifts in atoms and molecules is presented, followed by the physics behind solid sampling of laser ablation plumes, optical methods for isotope measurements, the suitable physical conditions of laser-produced plasma plumes for isotopic analysis, and the current status. Finally, concluding remarks will be made on the existing gaps between previous works in the literature and suggestions for future work.
Optical spectroscopy of laser-produced plasmas for standoff isotopic analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harilal, S. S.; Brumfield, B. E.; LaHaye, N. L.
This review article covers the present status of isotope detection through emission, absorption, and fluorescence spectroscopy of atoms and molecules in a laser-produced plasma formed from a solid sample. A description of the physics behind isotope shifts in atoms and molecules is presented, followed by the physics behind solid sampling of laser ablation plumes, optical methods for isotope measurements, the suitable physical conditions of laser-produced plasma plumes for isotopic analysis, and the current status. Lastly, concluding remarks will be made on the existing gaps between previous works in the literature and suggestions for future work.
Optical spectroscopy of laser-produced plasmas for standoff isotopic analysis
Harilal, S. S.; Brumfield, B. E.; LaHaye, N. L.; ...
2018-06-01
This review article covers the present status of isotope detection through emission, absorption, and fluorescence spectroscopy of atoms and molecules in a laser-produced plasma formed from a solid sample. A description of the physics behind isotope shifts in atoms and molecules is presented, followed by the physics behind solid sampling of laser ablation plumes, optical methods for isotope measurements, the suitable physical conditions of laser-produced plasma plumes for isotopic analysis, and the current status. Finally, concluding remarks will be made on the existing gaps between previous works in the literature and suggestions for future work.
Symptoms of musculoskeletal disorders among ammunition factory workers in Turkey.
Pinar, Tevfik; Cakmak, Z Aytul; Saygun, Meral; Akdur, Recep; Ulu, Nuriye; Keles, Isik; Saylam, Hamdi Saim
2013-01-01
The aim of this study was to assess the prevalence of symptoms of work-related musculoskeletal disorders (MSDs) and to determine the risk factors among ammunition factory workers in Turkey. This cross-sectional study was performed on 955 ammunition factory workers. Potential risk factors were investigated with a questionnaire and multivariate logistic regression analysis was performed. During the previous year, 39.3% of ammunition workers experienced symptoms of work-related MSDs. Logistic regression analysis showed smoking (odds ratio [OR] = 1.372), chronic diseases (OR = 1.795), body mass index (BMI; overweight) (OR = 1.631), working year (OR = 1.509), cold temperature (OR = 1.838), and work load (OR = 2.210) were significant independent risk factors for the development of symptoms of MSDs. It was found that both work-related conditions and personal and environmental factors are important for the development of occupational MSDs.
1980-10-01
Previous Investigations 9 3.2 Ockleston’s Work 9 3.3 Wood’s Work 11 3.3.1 Experimental Investigation 11 3.3.2 Analytical investigation 13 3.3.3 Load...Deflection Relationship 16 3.4 Sawczuck’s Work 17 3.5 Park’s Work on Compressive Membrane Action 19 3.5.1 Experimental Investigation 19 3.5.2 Analysis of...DEFLECTION CAPACITY 104 8.1 Idealized Load-Deflection Behavior of a Restrained Strip 104 8.2 A Comparison with Experimental Results 110 9. DEVELOPMENT OF
IDENTIFICATION OF REGIME SHIFTS IN TIME SERIES USING NEIGHBORHOOD STATISTICS
The identification of alternative dynamic regimes in ecological systems requires several lines of evidence. Previous work on time series analysis of dynamic regimes includes mainly model-fitting methods. We introduce two methods that do not use models. These approaches use state-...
RESEARCH ASSOCIATED WITH THE DEVELOPMENT OF EPA METHOD 552.2
The work presented in this paper entails the development of a method for haloacetic acid (HAA) analysis, Environmental Protection Agency (EPA)method 552.2, that improves the saftey and efficiency of previous methods and incorporates three additional trihalogenated acetic acids: b...
puma: a Bioconductor package for propagating uncertainty in microarray analysis.
Pearson, Richard D; Liu, Xuejun; Sanguinetti, Guido; Milo, Marta; Lawrence, Neil D; Rattray, Magnus
2009-07-09
Most analyses of microarray data are based on point estimates of expression levels and ignore the uncertainty of such estimates. By determining uncertainties from Affymetrix GeneChip data and propagating these uncertainties to downstream analyses it has been shown that we can improve results of differential expression detection, principal component analysis and clustering. Previously, implementations of these uncertainty propagation methods have only been available as separate packages, written in different languages. Previous implementations have also suffered from being very costly to compute, and in the case of differential expression detection, have been limited in the experimental designs to which they can be applied. puma is a Bioconductor package incorporating a suite of analysis methods for use on Affymetrix GeneChip data. puma extends the differential expression detection methods of previous work from the 2-class case to the multi-factorial case. puma can be used to automatically create design and contrast matrices for typical experimental designs, which can be used both within the package itself but also in other Bioconductor packages. The implementation of differential expression detection methods has been parallelised leading to significant decreases in processing time on a range of computer architectures. puma incorporates the first R implementation of an uncertainty propagation version of principal component analysis, and an implementation of a clustering method based on uncertainty propagation. All of these techniques are brought together in a single, easy-to-use package with clear, task-based documentation. For the first time, the puma package makes a suite of uncertainty propagation methods available to a general audience. These methods can be used to improve results from more traditional analyses of microarray data. puma also offers improvements in terms of scope and speed of execution over previously available methods. puma is recommended for anyone working with the Affymetrix GeneChip platform for gene expression analysis and can also be applied more generally.
NASA Technical Reports Server (NTRS)
Hornberger, G. M.; Rastetter, E. B.
1982-01-01
A literature review of the use of sensitivity analyses in modelling nonlinear, ill-defined systems, such as ecological interactions is presented. Discussions of previous work, and a proposed scheme for generalized sensitivity analysis applicable to ill-defined systems are included. This scheme considers classes of mathematical models, problem-defining behavior, analysis procedures (especially the use of Monte-Carlo methods), sensitivity ranking of parameters, and extension to control system design.
General Aviation Interior Noise. Part 3; Noise Control Measure Evaluation
NASA Technical Reports Server (NTRS)
Unruh, James F.; Till, Paul D.; Palumbo, Daniel L. (Technical Monitor)
2002-01-01
The work reported herein is an extension to the work accomplished under NASA Grant NAG1-2091 on the development of noise/source/path identification techniques for single engine propeller driven General Aviation aircraft. The previous work developed a Conditioned Response Analysis (CRA) technique to identify potential noise sources that contributed to the dominating tonal responses within the aircraft cabin. The objective of the present effort was to improve and verify the findings of the CRA and develop and demonstrate noise control measures for single engine propeller driven General Aviation aircraft.
The Work Compatibility Improvement Framework: an integrated perspective of the human-at-work system.
Genaidy, Ash; Salem, Sam; Karwowski, Waldemar; Paez, Omar; Tuncel, Setenay
2007-01-15
The industrial revolution demonstrated the limitations of a pure mechanistic approach towards work design. Human work is now seen as a complex entity that involves different scientific branches and blurs the line between mental and physical activities. Job design has been a traditional concern of applied psychology, which has provided insight into the interaction between the individual and the work environment. The goal of this paper is to introduce the human-at-work system as a holistic approach to organizational design. It postulates that the well-being of workers and work outcomes are issues that need to be addressed jointly, moving beyond traditional concepts of job satisfaction and work stress. The work compatibility model (WCM) is introduced as an engineering approach that seeks to integrate previous constructs of job and organizational design. The WCM seeks a balance between energy expenditure and replenishment. The implementation of the WCM in industrial settings is described within the context of the Work Compatibility Improvement Framework. A sample review of six models (motivation-hygiene theory; job characteristics theory; person-environment fit; demand-control model; and balance theory) provides the foundation for the interaction between the individual and the work environment. A review of three workload assessment methods (position analysis questionnaire, job task analysis and NASA task load index) gives an example of the foundation for the taxonomy of work environment domains. Previous models have sought to identify a balance state for the human-at-work system. They differentiated between the objective and subjective effects of the environment and the worker. An imbalance between the person and the environment has been proven to increase health risks. The WCM works with a taxonomy of 12 work domains classified in terms of the direct (acting) or indirect (experienced) effect on the worker. In terms of measurement, two quantitative methods are proposed to measure the state of the system. The first method introduced by Abdallah et al. (2004) identifies operating zones. The second method introduced by Salem et al. (2006) identifies the distribution of the work elements on the x/y coordinate plane. While previous efforts have identified some relevant elements of the systems, they failed to provide a holistic, quantitative approach combining organizational and human factors into a common framework. It is postulated that improving the well-being of workers will simultaneously improve organizational outcomes. The WCM moves beyond previous models by providing a hierarchical structure of work domains and a combination of methods to diagnose any organizational setting. The WCM is an attempt to achieve organizational excellence in human resource management, moving beyond job design to an integrated improvement strategy. A joint approach to organizational and job design will not only result in decreased prevalence of health risks, but in enhanced organizational effectiveness as well. The implementation of the WCM, that is, the Work Compatibility Improvement Framework, provides the basis for integrating different elements of the work environment into a single reliable construct. An improvement framework is essential to ensure that the measures of the WCM result in a system that is adaptive and self-regulated.
Chaos in neurons and its application: perspective of chaos engineering.
Hirata, Yoshito; Oku, Makito; Aihara, Kazuyuki
2012-12-01
We review our recent work on chaos in neurons and its application to neural networks from perspective of chaos engineering. Especially, we analyze a dataset of a squid giant axon by newly combining our previous work of identifying Devaney's chaos with surrogate data analysis, and show that an axon can behave chaotically. Based on this knowledge, we use a chaotic neuron model to investigate possible information processing in the brain.
ERIC Educational Resources Information Center
Sitlington, Patricia L.; Easterday, Joseph R.
The purpose of Project COMPETE is to use previous research and exemplary practices to develop and validate a model and training sequence to assist retarded youth to make the transition from school to employment in the most competitive environment possible. The study reported in this project working paper sought to identify potential factors that…
Bornmann, Lutz; de Moya Anegón, Félix; Leydesdorff, Loet
2010-10-13
In contrast to Newton's well-known aphorism that he had been able "to see further only by standing on the shoulders of giants," one attributes to the Spanish philosopher Ortega y Gasset the hypothesis saying that top-level research cannot be successful without a mass of medium researchers on which the top rests comparable to an iceberg. The Ortega hypothesis predicts that highly-cited papers and medium-cited (or lowly-cited) papers would equally refer to papers with a medium impact. The Newton hypothesis would be supported if the top-level research more frequently cites previously highly-cited work than that medium-level research cites highly-cited work. Our analysis is based on (i) all articles and proceedings papers which were published in 2003 in the life sciences, health sciences, physical sciences, and social sciences, and (ii) all articles and proceeding papers which were cited within these publications. The results show that highly-cited work in all scientific fields more frequently cites previously highly-cited papers than that medium-cited work cites highly-cited work. We demonstrate that papers contributing to the scientific progress in a field lean to a larger extent on previously important contributions than papers contributing little. These findings support the Newton hypothesis and call into question the Ortega hypothesis (given our usage of citation counts as a proxy for impact).
Tool for Rapid Analysis of Monte Carlo Simulations
NASA Technical Reports Server (NTRS)
Restrepo, Carolina; McCall, Kurt E.; Hurtado, John E.
2011-01-01
Designing a spacecraft, or any other complex engineering system, requires extensive simulation and analysis work. Oftentimes, the large amounts of simulation data generated are very di cult and time consuming to analyze, with the added risk of overlooking potentially critical problems in the design. The authors have developed a generic data analysis tool that can quickly sort through large data sets and point an analyst to the areas in the data set that cause specific types of failures. The Tool for Rapid Analysis of Monte Carlo simulations (TRAM) has been used in recent design and analysis work for the Orion vehicle, greatly decreasing the time it takes to evaluate performance requirements. A previous version of this tool was developed to automatically identify driving design variables in Monte Carlo data sets. This paper describes a new, parallel version, of TRAM implemented on a graphical processing unit, and presents analysis results for NASA's Orion Monte Carlo data to demonstrate its capabilities.
Time Series Data Analysis of Wireless Sensor Network Measurements of Temperature.
Bhandari, Siddhartha; Bergmann, Neil; Jurdak, Raja; Kusy, Branislav
2017-05-26
Wireless sensor networks have gained significant traction in environmental signal monitoring and analysis. The cost or lifetime of the system typically depends on the frequency at which environmental phenomena are monitored. If sampling rates are reduced, energy is saved. Using empirical datasets collected from environmental monitoring sensor networks, this work performs time series analyses of measured temperature time series. Unlike previous works which have concentrated on suppressing the transmission of some data samples by time-series analysis but still maintaining high sampling rates, this work investigates reducing the sampling rate (and sensor wake up rate) and looks at the effects on accuracy. Results show that the sampling period of the sensor can be increased up to one hour while still allowing intermediate and future states to be estimated with interpolation RMSE less than 0.2 °C and forecasting RMSE less than 1 °C.
Multiscale Modelling and Analysis of Collective Decision Making in Swarm Robotics
Vigelius, Matthias; Meyer, Bernd; Pascoe, Geoffrey
2014-01-01
We present a unified approach to describing certain types of collective decision making in swarm robotics that bridges from a microscopic individual-based description to aggregate properties. Our approach encompasses robot swarm experiments, microscopic and probabilistic macroscopic-discrete simulations as well as an analytic mathematical model. Following up on previous work, we identify the symmetry parameter, a measure of the progress of the swarm towards a decision, as a fundamental integrated swarm property and formulate its time evolution as a continuous-time Markov process. Contrary to previous work, which justified this approach only empirically and a posteriori, we justify it from first principles and derive hard limits on the parameter regime in which it is applicable. PMID:25369026
High energy PIXE: A tool to characterize multi-layer thick samples
NASA Astrophysics Data System (ADS)
Subercaze, A.; Koumeir, C.; Métivier, V.; Servagent, N.; Guertin, A.; Haddad, F.
2018-02-01
High energy PIXE is a useful and non-destructive tool to characterize multi-layer thick samples such as cultural heritage objects. In a previous work, we demonstrated the possibility to perform quantitative analysis of simple multi-layer samples using high energy PIXE, without any assumption on their composition. In this work an in-depth study of the parameters involved in the method previously published is proposed. Its extension to more complex samples with a repeated layer is also presented. Experiments have been performed at the ARRONAX cyclotron using 68 MeV protons. The thicknesses and sequences of a multi-layer sample including two different layers of the same element have been determined. Performances and limits of this method are presented and discussed.
Automatic detection of sleep macrostructure based on a sensorized T-shirt.
Bianchi, Anna M; Mendez, Martin O
2010-01-01
In the present work we apply a fully automatic procedure to the analysis of signal coming from a sensorized T-shit, worn during the night, for sleep evaluation. The goodness and reliability of the signals recorded trough the T-shirt was previously tested, while the employed algorithms for feature extraction and sleep classification were previously developed on standard ECG recordings and the obtained classification was compared to the standard clinical practice based on polysomnography (PSG). In the present work we combined T-shirt recordings and automatic classification and could obtain reliable sleep profiles, i.e. the sleep classification in WAKE, REM (rapid eye movement) and NREM stages, based on heart rate variability (HRV), respiration and movement signals.
Millimeter and Submillimeter Wave Spectroscopy of Higher Energy Conformers of 1,2-PROPANEDIOL
NASA Astrophysics Data System (ADS)
Zakharenko, Olena; Bossa, Jean-Baptiste; Lewen, Frank; Schlemmer, Stephan; Müller, Holger S. P.
2017-06-01
We have performed a study of the millimeter/submillimeter wave spectrum of four higher energy conformers of 1,2-propanediol (continuation of the previous study on the three lowest energy conformers. The present analysis of rotational transitions carried out in the frequency range 38 - 400 GHz represents a significant extension of previous microwave work. The new data were combined with previously-measured microwave transitions and fitted using a Watson's S-reduced Hamiltonian. The final fits were within experimental accuracy, and included spectroscopic parameters up to sixth order of angular momentum, for the ground states of the four higher energy conformers following previously studied ones: g'Ga, gG'g', aGg' and g'Gg. The present analysis provides reliable frequency predictions for astrophysical detection of 1,2-propanediol by radio telescope arrays at millimeter wavelengths. J.-B. Bossa, M.H. Ordu, H.S.P. Müller, F. Lewen, S. Schlemmer, A&A 570 (2014) A12)
Shift Work and Occupational Stress in Police Officers
Ma, Claudia C.; Andrew, Michael E.; Fekedulegn, Desta; Gu, Ja K.; Hartley, Tara A.; Charles, Luenda E.; Violanti, John M.; Burchfiel, Cecil M.
2014-01-01
Background Shift work has been associated with occupational stress in health providers and in those working in some industrial companies. The association is not well established in the law enforcement workforce. Our objective was to examine the association between shift work and police work-related stress. Methods The number of stressful events that occurred in the previous month and year was obtained using the Spielberger Police Stress Survey among 365 police officers aged 27–66 years. Work hours were derived from daily payroll records. A dominant shift (day, afternoon, or night) was defined for each participant as the shift with the largest percentage of total time a participant worked (starting time from 4:00 AM to 11:59 AM, from 12 PM to 7:59 PM, and from 8:00 PM to 3:59 AM for day, afternoon, and night shift, respectively) in the previous month or year. Analysis of variance and covariance were used to examine the number of total and subscale (administrative/professional pressure, physical/psychological danger, or organizational support) stressful events across the shift. Results During the previous month and year, officers working the afternoon and night shifts reported more stressful events than day shift officers for total stress, administrative/professional pressure, and physical/psychological danger (p < 0.05). These differences were independent of age, sex, race/ethnicity, and police rank. The frequency of these stressful events did not differ significantly between officers working the afternoon and night shifts. Conclusion Non–day shift workers may be exposed to more stressful events in this cohort. Interventions to reduce or manage police stress that are tailored by shift may be considered. PMID:25830066
Wavelet-based clustering of resting state MRI data in the rat.
Medda, Alessio; Hoffmann, Lukas; Magnuson, Matthew; Thompson, Garth; Pan, Wen-Ju; Keilholz, Shella
2016-01-01
While functional connectivity has typically been calculated over the entire length of the scan (5-10min), interest has been growing in dynamic analysis methods that can detect changes in connectivity on the order of cognitive processes (seconds). Previous work with sliding window correlation has shown that changes in functional connectivity can be observed on these time scales in the awake human and in anesthetized animals. This exciting advance creates a need for improved approaches to characterize dynamic functional networks in the brain. Previous studies were performed using sliding window analysis on regions of interest defined based on anatomy or obtained from traditional steady-state analysis methods. The parcellation of the brain may therefore be suboptimal, and the characteristics of the time-varying connectivity between regions are dependent upon the length of the sliding window chosen. This manuscript describes an algorithm based on wavelet decomposition that allows data-driven clustering of voxels into functional regions based on temporal and spectral properties. Previous work has shown that different networks have characteristic frequency fingerprints, and the use of wavelets ensures that both the frequency and the timing of the BOLD fluctuations are considered during the clustering process. The method was applied to resting state data acquired from anesthetized rats, and the resulting clusters agreed well with known anatomical areas. Clusters were highly reproducible across subjects. Wavelet cross-correlation values between clusters from a single scan were significantly higher than the values from randomly matched clusters that shared no temporal information, indicating that wavelet-based analysis is sensitive to the relationship between areas. Copyright © 2015 Elsevier Inc. All rights reserved.
Weigl, M; Müller, A; Angerer, P
2012-05-01
The ongoing demographic development creates distinctive challenges for the management of hospitals. Due to the demographic change hospitals will be more and more dependent on the work ability and performance of an aging workforce. Therefore, age-specific work design and interventions are inevitable to create a work environment that sustainably promotes health and well-being. This study reports the work conditions, health impairments (work ability, musculoskeletal complaints), and turnover intentions (intentions to leave the organisation within the previous year, intentions to leave before official retirement age) of N=210 employees working in a specialist hospital. Age-specific analyses show that correlations between working conditions, health, and turnover intention differ substantially across the age groups. From the results an exemplary approach for the analysis and management of demography-related challenges for hospital employees has been deduced. With it, this study presents a promising strategy to identify age-related work stressors and health complaints and to promote health and well-being of hospital employees in different age groups. © Georg Thieme Verlag KG Stuttgart · New York.
St-Maurice, Justin D; Burns, Catherine M
2017-07-28
Health care is a complex sociotechnical system. Patient treatment is evolving and needs to incorporate the use of technology and new patient-centered treatment paradigms. Cognitive work analysis (CWA) is an effective framework for understanding complex systems, and work domain analysis (WDA) is useful for understanding complex ecologies. Although previous applications of CWA have described patient treatment, due to their scope of work patients were previously characterized as biomedical machines, rather than patient actors involved in their own care. An abstraction hierarchy that characterizes patients as beings with complex social values and priorities is needed. This can help better understand treatment in a modern approach to care. The purpose of this study was to perform a WDA to represent the treatment of patients with medical records. The methods to develop this model included the analysis of written texts and collaboration with subject matter experts. Our WDA represents the ecology through its functional purposes, abstract functions, generalized functions, physical functions, and physical forms. Compared with other work domain models, this model is able to articulate the nuanced balance between medical treatment, patient education, and limited health care resources. Concepts in the analysis were similar to the modeling choices of other WDAs but combined them in as a comprehensive, systematic, and contextual overview. The model is helpful to understand user competencies and needs. Future models could be developed to model the patient's domain and enable the exploration of the shared decision-making (SDM) paradigm. Our work domain model links treatment goals, decision-making constraints, and task workflows. This model can be used by system developers who would like to use ecological interface design (EID) to improve systems. Our hierarchy is the first in a future set that could explore new treatment paradigms. Future hierarchies could model the patient as a controller and could be useful for mobile app development. ©Justin D St-Maurice, Catherine M Burns. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 28.07.2017.
2017-01-01
Background Health care is a complex sociotechnical system. Patient treatment is evolving and needs to incorporate the use of technology and new patient-centered treatment paradigms. Cognitive work analysis (CWA) is an effective framework for understanding complex systems, and work domain analysis (WDA) is useful for understanding complex ecologies. Although previous applications of CWA have described patient treatment, due to their scope of work patients were previously characterized as biomedical machines, rather than patient actors involved in their own care. Objective An abstraction hierarchy that characterizes patients as beings with complex social values and priorities is needed. This can help better understand treatment in a modern approach to care. The purpose of this study was to perform a WDA to represent the treatment of patients with medical records. Methods The methods to develop this model included the analysis of written texts and collaboration with subject matter experts. Our WDA represents the ecology through its functional purposes, abstract functions, generalized functions, physical functions, and physical forms. Results Compared with other work domain models, this model is able to articulate the nuanced balance between medical treatment, patient education, and limited health care resources. Concepts in the analysis were similar to the modeling choices of other WDAs but combined them in as a comprehensive, systematic, and contextual overview. The model is helpful to understand user competencies and needs. Future models could be developed to model the patient’s domain and enable the exploration of the shared decision-making (SDM) paradigm. Conclusion Our work domain model links treatment goals, decision-making constraints, and task workflows. This model can be used by system developers who would like to use ecological interface design (EID) to improve systems. Our hierarchy is the first in a future set that could explore new treatment paradigms. Future hierarchies could model the patient as a controller and could be useful for mobile app development. PMID:28754650
Propagation analysis of transverse defects originating at the lower gage corner of rail
DOT National Transportation Integrated Search
1998-12-01
This report describes analyses performed to examine the growth rate of a particular transverse defect that forms in the rail head. The most common transverse defect found in rail, known as the detail fracture, has been studied in previous work. The p...
Development of a Multi-Sensor Cancer Detection Probe Final Report CRADA No. TC-2026-01
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marion, J.; Hular, R.
This collaboration continued work started under a previous CRADA (TSB-2023-00) to take a detailed concept specification for a multi-sensor needle/probe suitable for breast cancer analysis and produce a prototype system suitable for human FDA trials.
Prevost, Luanna B.; Smith, Michelle K.; Knight, Jennifer K.
2016-01-01
Previous work has shown that students have persistent difficulties in understanding how central dogma processes can be affected by a stop codon mutation. To explore these difficulties, we modified two multiple-choice questions from the Genetics Concept Assessment into three open-ended questions that asked students to write about how a stop codon mutation potentially impacts replication, transcription, and translation. We then used computer-assisted lexical analysis combined with human scoring to categorize student responses. The lexical analysis models showed high agreement with human scoring, demonstrating that this approach can be successfully used to analyze large numbers of student written responses. The results of this analysis show that students’ ideas about one process in the central dogma can affect their thinking about subsequent and previous processes, leading to mixed models of conceptual understanding. PMID:27909016
2014-06-01
intelligence analysis processes. However, as has been noted in previous work (e.g., [42]), there are a number of important differences between the nature of the...problem encountered in the context of the ELICIT task and the problems dealt with by intelligence analysts. Perhaps most importantly, the fact that a...see Section 7). 6 departure from the reality of most intelligence analysis situations: in most real-world intelligence analysis problems agents have
Lo Bartolo, Luciano; Sheahan, Marie
2009-01-01
The 2005 WorkChoices legislation delivered a significant diminution of Australian workers' rights in the form of choice and control over numerous aspects of working life. WorkChoices extended previous neoliberal reforms and consolidated the negative impacts of those reforms on marginalized groups of workers, especially those in precarious employment. This paper reports on the findings of an occupational science-based, critical discourse analysis of a government newspaper advertisement that promotes the reforms. The construction of a WorkChoices discourse, one that was based on and sought to extend neoliberal hegemony, is identified by exploring the ways that particular ideas are presented as natural and mutually beneficial and, in response, the development of a counter-hegemonic argument, based on occupational justice theory, is discussed. The broader application of critical social research is also recommended in extending the occupational justice paradigm.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Farmer, M. T.
The overall objective of the current work is to carry out a scoping analysis to determine the impact of ATF on late phase accident progression; in particular, the molten core-concrete interaction portion of the sequence that occurs after the core debris fails the reactor vessel and relocates into containment. This additional study augments previous work by including kinetic effects that govern chemical reaction rates during core-concrete interaction. The specific ATF considered as part of this study is SiC-clad UO 2.
UEDGE Simulations for Power and Particle Flow Analysis of FRC Rocket
NASA Astrophysics Data System (ADS)
Zheng, Fred; Evans, Eugene S.; McGreivy, Nick; Kaptanoglu, Alan; Izacard, Olivier; Cohen, Samuel A.
2017-10-01
The field-reversed configuration (FRC) is under consideration for use in a direct fusion drive (DFD) rocket propulsion system for future space missions. To achieve a rocket configuration, the FRC is embedded within an asymmetric magnetic mirror, in which one end is closed and contains a gas box, and the other end is open and incorporates a magnetic nozzle. Neutral deuterium is injected into the gas box, and flows through the scrape-off layer (SOL) around the core plasma and out the magnetic nozzle, both cooling the core and serving as propellant. Previous studies have examined a range of operating conditions for the SOL of a DFD using UEDGE, a 2D fluid code; discrepancies on the order of 5% were found during the analysis of overall power balance. This work extends the analysis of the previously-studied SOL geometry by updating boundary conditions and conducting a detailed study of power and particle flows within the simulation with the goals of modeling electrical power generation instead of thrust and achieving higher specific impulse. This work was supported, in part, by DOE Contract Number DE-AC02-09CH11466 and Princeton Environmental Institute.
Aurally-adequate time-frequency analysis for scattered sound in auditoria
NASA Astrophysics Data System (ADS)
Norris, Molly K.; Xiang, Ning; Kleiner, Mendel
2005-04-01
The goal of this work was to apply an aurally-adequate time-frequency analysis technique to the analysis of sound scattering effects in auditoria. Time-frequency representations were developed as a motivated effort that takes into account binaural hearing, with a specific implementation of interaural cross-correlation process. A model of the human auditory system was implemented in the MATLAB platform based on two previous models [A. Härmä and K. Palomäki, HUTear, Espoo, Finland; and M. A. Akeroyd, A. Binaural Cross-correlogram Toolbox for MATLAB (2001), University of Sussex, Brighton]. These stages include proper frequency selectivity, the conversion of the mechanical motion of the basilar membrane to neural impulses, and binaural hearing effects. The model was then used in the analysis of room impulse responses with varying scattering characteristics. This paper discusses the analysis results using simulated and measured room impulse responses. [Work supported by the Frank H. and Eva B. Buck Foundation.
Vaillancourt, Samuel; Schultz, Susan E; Leaver, Chad; Stukel, Thérèse A; Schull, Michael J
2013-01-01
Recently, many Canadian emergency departments (EDs) have struggled with physician staffing shortages. In 2006, the Ontario Ministry of Health and Long-Term Care funded a brief "emergency medicine primer" (EMP) course for family physicians to upgrade or refresh skills, with the goal of increasing their ED work intensity. We sought to determine the effect of the EMP on the ED work intensity of family physicians. A retrospective longitudinal study was conducted of the ED work of 239 family physicians in the 2 years before and after a minimum of 6 months and up to 2 years from completing an EMP course in 2006 to 2008 compared to non-EMP physicians. ED work intensity was defined as the number of ED shifts per month and the number of ED patients seen per month. We conducted two analyses: a before and after comparison of all EMP physicians and a matched cohort analysis matching each EMP physician to four non-EMP physicians on sex, year of medical school graduation, rurality, and pre-EMP ED work intensity. Postcourse, EMP physicians worked 0.5 more ED shifts per month (13% increase, p = 0.027). Compared to their matched controls, EMP physicians worked 0.7 more shifts per month (13% increase, p = 0.0032) and saw 15 more patients per month (17% increase, p = 0.0008) compared to matched non-EMP physicians. The greatest increases were among EMP physicians who were younger, were urban, had previous ED experience, or worked in a high-volume ED. The effect of the EMP course was negligible for physicians with no previous ED experience or working in rural areas. The EMP course is associated with modest increases in ED work intensity among some family physicians, in particular younger physicians in urban areas. No increase was seen among physicians without previous ED experience or working in rural areas.
Correcting Spellings in Second Language Learners' Computer-Assisted Collaborative Writing
ERIC Educational Resources Information Center
Musk, Nigel
2016-01-01
The present study uses multimodal conversation analysis to examine how pupils studying English as a foreign language make spelling corrections in real time while doing collaborative computer-assisted project work. Unlike most previous related investigations, this study focuses on the "process" rather than evaluating the final…
Ammosamides Unveil Novel Biosynthetic Machinery.
Colosimo, Dominic A; MacMillan, John B
2016-12-22
In this issue of Cell Chemical Biology, Jordan and Moore (2016) present a thorough biosynthetic analysis of ammosamides, a bacterial natural product. The work highlights the previously unknown overlap between two natural products families: pyrroloquinoline alkaloids and ribosomally synthesized posttranslationally modified peptides (RiPPs). Copyright © 2016. Published by Elsevier Ltd.
Understanding the mechanism of resistance breaking on tomato by Tomato mottle mosaic virus
USDA-ARS?s Scientific Manuscript database
Tomato mottle mosaic virus (ToMMV) has broadened it’s distribution around the world. In our previous work, we observed a partial resistance breaking by ToMMV on tomato. To understand the mechanism of this resistance breaking, we carried out comparative analysis through Sanger sequencing, genotyping ...
Academic Capitalism in the Pasteur's Quadrant
ERIC Educational Resources Information Center
Mendoza, Pilar
2009-01-01
Based on previous empirical studies, in this work the author presents an analysis of the role of context in academic capitalism. In particular, she argues that the literature on academic capitalism fails to properly acknowledge disciplinary and institutional differences, which results in an oversimplification of the effects of industry-academia…
Listening to More Voices: Why Being Heard Matters
ERIC Educational Resources Information Center
Elisha-Primo, Iris; Sandler, Simone; Goldfrad, Keren
2015-01-01
This article examines various voices in a triangulated needs analysis project aimed at reevaluating the curriculum of a graduate level EAP program. Previous work (Elisha-Primo, et al., 2010) presented students' voices; this article focuses on department chairpersons and graduate advisors, and graduate EFL instructors with respect to the perceived…
Tree mortality risk of oak due to gypsy moth
K.W. Gottschalk; J.J. Colbert; D.L. Feicht
1998-01-01
We present prediction models for estimating tree mortality resulting from gypsy moth, Lymantria dispar, defoliation in mixed oak, Quercus sp., forests. These models differ from previous work by including defoliation as a factor in the analysis. Defoliation intensity, initial tree crown condition (crown vigour), crown position, and...
The minimal SUSY B - L model: simultaneous Wilson lines and string thresholds
Deen, Rehan; Ovrut, Burt A.; Purves, Austin
2016-07-08
In previous work, we presented a statistical scan over the soft supersymmetry breaking parameters of the minimal SUSY B - L model. For specificity of calculation, unification of the gauge parameters was enforced by allowing the two Z 3×Z 3 Wilson lines to have mass scales separated by approximately an order of magnitude. This introduced an additional “left-right” sector below the unification scale. In this paper, for three important reasons, we modify our previous analysis by demanding that the mass scales of the two Wilson lines be simultaneous and equal to an “average unification” mass U >. The present analysismore » is 1) more “natural” than the previous calculations, which were only valid in a very specific region of the Calabi-Yau moduli space, 2) the theory is conceptually simpler in that the left-right sector has been removed and 3) in the present analysis the lack of gauge unification is due to threshold effects — particularly heavy string thresholds, which we calculate statistically in detail. As in our previous work, the theory is renormalization group evolved from U > to the electroweak scale — being subjected, sequentially, to the requirement of radiative B - L and electroweak symmetry breaking, the present experimental lower bounds on the B - L vector boson and sparticle masses, as well as the lightest neutral Higgs mass of ~125 GeV. The subspace of soft supersymmetry breaking masses that satisfies all such constraints is presented and shown to be substantial.« less
Fabrication Materials for a Closed Cycle Brayton Turbine Wheel
NASA Technical Reports Server (NTRS)
Khandelwal, Suresh; Hah, Chunill; Powers, Lynn M.; Stewart, Mark E.; Suresh, Ambady; Owen, Albert K.
2006-01-01
A multidisciplinary analysis of a radial inflow turbine rotor is presented. This work couples high-fidelity fluid, structural, and thermal simulations in a seamless multidisciplinary analysis to investigate the consequences of material selection. This analysis extends multidisciplinary techniques previously demonstrated on rocket turbopumps and hypersonic engines. Since no design information is available for the anticipated Brayton rotating machinery, an existing rotor design (the Brayton Rotating Unit (BRU)) was used in the analysis. Steady state analysis results of a notional turbine rotor indicate that stress levels are easily manageable at the turbine inlet temperature, and stress levels anticipated using either superalloys or ceramics.
O'Sullivan, Patricia S; Mkony, Charles; Beard, Jessica; Irby, David M
2016-09-01
Previous studies on the identity development and motivation of faculty developers have occurred with seasoned developers in a research-rich environment. We sought to determine if the findings of those studies could be replicated with novice faculty developers in a resource-constrained environment. We interviewed 15 novice faculty developers from Muhimbili University of Health and Allied Sciences (MUHAS) who, at the time, had led faculty development activities for no more than two years. We conducted a qualitative analysis sensitized by the previous findings. Results were very similar to the previous work. The developers described compartmentalized, hierarchical, and merged identities. The impact was on their teaching as well as on others at MUHAS and on the institution itself. The motivations related to mastery, purpose, duty, satisfaction, and relatedness. This replication led us to conclude that identity development as a faculty developer occurs even in novice developers who do faculty development as only part of their work and despite constrained resources and a different culture. These developers find the work richly rewarding and their motivations benefit the institution. This body of research highlights how faculty development provides benefits to the institution as well as engaging career opportunities.
The complexity of classical music networks
NASA Astrophysics Data System (ADS)
Rolla, Vitor; Kestenberg, Juliano; Velho, Luiz
2018-02-01
Previous works suggest that musical networks often present the scale-free and the small-world properties. From a musician's perspective, the most important aspect missing in those studies was harmony. In addition to that, the previous works made use of outdated statistical methods. Traditionally, least-squares linear regression is utilised to fit a power law to a given data set. However, according to Clauset et al. such a traditional method can produce inaccurate estimates for the power law exponent. In this paper, we present an analysis of musical networks which considers the existence of chords (an essential element of harmony). Here we show that only 52.5% of music in our database presents the scale-free property, while 62.5% of those pieces present the small-world property. Previous works argue that music is highly scale-free; consequently, it sounds appealing and coherent. In contrast, our results show that not all pieces of music present the scale-free and the small-world properties. In summary, this research is focused on the relationship between musical notes (Do, Re, Mi, Fa, Sol, La, Si, and their sharps) and accompaniment in classical music compositions. More information about this research project is available at https://eden.dei.uc.pt/~vitorgr/MS.html.
Analytic Closed-Form Solution of a Mixed Layer Model for Stratocumulus Clouds
NASA Astrophysics Data System (ADS)
Akyurek, Bengu Ozge
Stratocumulus clouds play an important role in climate cooling and are hard to predict using global climate and weather forecast models. Thus, previous studies in the literature use observations and numerical simulation tools, such as large-eddy simulation (LES), to solve the governing equations for the evolution of stratocumulus clouds. In contrast to the previous works, this work provides an analytic closed-form solution to the cloud thickness evolution of stratocumulus clouds in a mixed-layer model framework. With a focus on application over coastal lands, the diurnal cycle of cloud thickness and whether or not clouds dissipate are of particular interest. An analytic solution enables the sensitivity analysis of implicitly interdependent variables and extrema analysis of cloud variables that are hard to achieve using numerical solutions. In this work, the sensitivity of inversion height, cloud-base height, and cloud thickness with respect to initial and boundary conditions, such as Bowen ratio, subsidence, surface temperature, and initial inversion height, are studied. A critical initial cloud thickness value that can be dissipated pre- and post-sunrise is provided. Furthermore, an extrema analysis is provided to obtain the minima and maxima of the inversion height and cloud thickness within 24 h. The proposed solution is validated against LES results under the same initial and boundary conditions. Then, the proposed analytic framework is extended to incorporate multiple vertical columns that are coupled by advection through wind flow. This enables a bridge between the micro-scale and the mesoscale relations. The effect of advection on cloud evolution is studied and a sensitivity analysis is provided.
Statistical Analysis of CFD Solutions from the 6th AIAA CFD Drag Prediction Workshop
NASA Technical Reports Server (NTRS)
Derlaga, Joseph M.; Morrison, Joseph H.
2017-01-01
A graphical framework is used for statistical analysis of the results from an extensive N- version test of a collection of Reynolds-averaged Navier-Stokes computational uid dynam- ics codes. The solutions were obtained by code developers and users from North America, Europe, Asia, and South America using both common and custom grid sequencees as well as multiple turbulence models for the June 2016 6th AIAA CFD Drag Prediction Workshop sponsored by the AIAA Applied Aerodynamics Technical Committee. The aerodynamic con guration for this workshop was the Common Research Model subsonic transport wing- body previously used for both the 4th and 5th Drag Prediction Workshops. This work continues the statistical analysis begun in the earlier workshops and compares the results from the grid convergence study of the most recent workshop with previous workshops.
The association between loss of work ability and depression: a focus on employment status.
Lee, Sang Ah; Ju, Yeong Jun; Han, Kyu-Tae; Choi, Jae Woo; Yoon, Hyo Jung; Park, Eun-Cheol
2017-01-01
Work-related factors are one of the known risk factors for depression. Given that the ability to work is considered an important aspect of well-being and health status, we investigated the association between the loss of work ability and depression. We further examined the association stratified by employment status. We used data from the Korea Welfare Panel Study. The dependent variable of the present study was depression, which is measured by the Center for Epidemiologic Studies Depression Scale. Work ability transition from the previous year was divided into three categories: maintained, loss, and complete loss. A linear mixed-effects model was performed for the analysis. The work ability loss group (β = 2.071, p < 0.0002) and the work ability completely loss group (β = 2.651, p = 0.015) had higher depression scores compared to those who maintained their work ability from the previous year. Specifically, those who lost their work ability and their job (β = 3.685, p = 0.0068) had the highest depression scores compared to those who maintained their work ability and job. We found that those who lost their ability to work may be at risk of depression, and this finding was particularly prominent among those who also became unemployed. Therefore, psychological support is needed for these individuals to overcome the negative influence of the loss of work ability.
Technology Transition Pull: A Case Study of Rate Monotonic Analysis (Part 2).
1995-04-01
met in software-intensive real - time systems . RMA allows engineers to under- stand and predict the timing behavior of real-time software to a degree...not previously possible. The Rate Monotonic Analysis for Real - Time Systems (RMARTS) Project at the SEI has dem- onstrated how to design, implement...troubleshoot, and maintain real - time systems using RMA. From 1987-1992, the project worked to develop the technology and encourage its widespread
Reply to "Comment on `Particle path through a nested Mach-Zehnder interferometer' "
NASA Astrophysics Data System (ADS)
Griffiths, Robert B.
2018-02-01
While much of the technical analysis in the preceding Comment is correct, in the end it confirms the conclusion reached in my previous work [Phys. Rev. A 94, 032115 (2016), 10.1103/PhysRevA.94.032115]: A consistent histories analysis provides no support for the claim of counterfactual quantum communication put forward by Salih et al. [Phys. Rev. Lett. 110, 170502 (2013), 10.1103/PhysRevLett.110.170502].
IOMEDEX Sound Velocity Analysis and Environmental Data Summary
1974-08-01
WORK UNIT NUMBERS INaval OceaIoogra-~hic Office Coup 61,S0 - Lashi..qton, DC 20373 _____________________ I - CNTOLIN OFIE AM AD DDES...exact nature of the exercise can be found in the IOMEDEX LRAPP Operation Order (Maury Center for Ocean Science , 1971). Much of the analysis contained...in this report has appeared previously in the IOM[DEX Synopsis Report (Maury Center for Ocean Science , 1972a) and in the IGMEDEX Summary Report (Maury
Exercise and Bone Density: Meta-Analysis
2003-10-01
were estimat- included in our analysis. Thus, for example, if BMD ed using previously developed methods .ŕ T- was also assessed in women performing...from 12.6% unpublished work is inappropriate because it has in the placebo group to 9.0% in the alendronate not gone through the peer review process...Olkin I. Statistical Methods for Meta-Analy- taken that could enhance BMD, cigarette smoking, 0 sis. San Diego, CA: Academic Press; 1985. take tht
Interface Technology for Geometrically Nonlinear Analysis of Multiple Connected Subdomains
NASA Technical Reports Server (NTRS)
Ransom, Jonathan B.
1997-01-01
Interface technology for geometrically nonlinear analysis is presented and demonstrated. This technology is based on an interface element which makes use of a hybrid variational formulation to provide for compatibility between independently modeled connected subdomains. The interface element developed herein extends previous work to include geometric nonlinearity and to use standard linear and nonlinear solution procedures. Several benchmark nonlinear applications of the interface technology are presented and aspects of the implementation are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Carla J. Miller
This report provides a summary of the literature review that was performed and based on previous work performed at the Idaho National Laboratory studying the Three Mile Island 2 (TMI-2) nuclear reactor accident, specifically the melted fuel debris. The purpose of the literature review was to document prior published work that supports the feasibility of the analytical techniques that were developed to provide quantitative results of the make-up of the fuel and reactor component debris located inside and outside the containment. The quantitative analysis provides a technique to perform nuclear fuel accountancy measurements
Maximum Work of Free-Piston Stirling Engine Generators
NASA Astrophysics Data System (ADS)
Kojima, Shinji
2017-04-01
Using the method of adjoint equations described in Ref. [1], we have calculated the maximum thermal efficiencies that are theoretically attainable by free-piston Stirling and Carnot engine generators by considering the work loss due to friction and Joule heat. The net work done by the Carnot cycle is negative even when the duration of heat addition is optimized to give the maximum amount of heat addition, which is the same situation for the Brayton cycle described in our previous paper. For the Stirling cycle, the net work done is positive, and the thermal efficiency is greater than that of the Otto cycle described in our previous paper by a factor of about 2.7-1.4 for compression ratios of 5-30. The Stirling cycle is much better than the Otto, Brayton, and Carnot cycles. We have found that the optimized piston trajectories of the isothermal, isobaric, and adiabatic processes are the same when the compression ratio and the maximum volume of the same working fluid of the three processes are the same, which has facilitated the present analysis because the optimized piston trajectories of the Carnot and Stirling cycles are the same as those of the Brayton and Otto cycles, respectively.
Central and Peripheral Components of Working Memory Storage
Cowan, Nelson; Saults, J. Scott; Blume, Christopher L.
2014-01-01
This study re-examines the issue of how much of working memory storage is central, or shared across sensory modalities and verbal and nonverbal codes, and how much is peripheral, or specific to a modality or code. In addition to the exploration of many parameters in 9 new dual-task experiments and re-analysis of some prior evidence, the innovations of the present work compared to previous studies of memory for two stimulus sets include (1) use of a principled set of formulas to estimate the number of items in working memory, and (2) a model to dissociate central components, which are allocated to very different stimulus sets depending on the instructions, from peripheral components, which are used for only one kind of material. We consistently find that the central contribution is smaller than was suggested by Saults and Cowan (2007), and that the peripheral contribution is often much larger when the task does not require the binding of features within an object. Previous capacity estimates are consistent with the sum of central plus peripheral components observed here. We consider the implications of the data as constraints on theories of working memory storage and maintenance. PMID:24867488
Bottema-Beutel, Kristen; Louick, Rebecca; White, Rachael
2015-01-01
This Conversation Analytic study examined the talk of an adolescent with Asperger syndrome (under previously used diagnostic criteria), Nathan, as he interacts with peers in a small group setting. We focused on Nathan's repetition aimed at pursuing response, and rely on analytical frameworks including response mobilization, face-work, and agreement preference. We found that while Nathan's repetitions resembled 'topic perseveration' previously described in the literature, they showed evidence of interactional awareness as they were employed when peers offered little or no response to his original utterance. However, we also found that while much of Nathan's talk was sophisticatedly structured, his repetition to pursue response eschewed interaction rituals that work to maintain social cohesion. As a result, Nathan's interactional priorities appeared mis-aligned with those of his peers, and failed to produce extended interactions in most cases. Readers will be able to describe features of conversational interaction, including response mobilization, agreement preference, and face work. They will understand the relevance of conversation analysis to the study of interaction in individuals with autism spectrum disorder. Lastly, they will be able to describe the conditions under which the subject used repetition within peer interactions, and the effects of his repetition on interaction. Copyright © 2015 Elsevier Inc. All rights reserved.
Detecting population-environmental interactions with mismatched time series data.
Ferguson, Jake M; Reichert, Brian E; Fletcher, Robert J; Jager, Henriëtte I
2017-11-01
Time series analysis is an essential method for decomposing the influences of density and exogenous factors such as weather and climate on population regulation. However, there has been little work focused on understanding how well commonly collected data can reconstruct the effects of environmental factors on population dynamics. We show that, analogous to similar scale issues in spatial data analysis, coarsely sampled temporal data can fail to detect covariate effects when interactions occur on timescales that are fast relative to the survey period. We propose a method for modeling mismatched time series data that couples high-resolution environmental data to low-resolution abundance data. We illustrate our approach with simulations and by applying it to Florida's southern Snail kite population. Our simulation results show that our method can reliably detect linear environmental effects and that detecting nonlinear effects requires high-resolution covariate data even when the population turnover rate is slow. In the Snail kite analysis, our approach performed among the best in a suite of previously used environmental covariates explaining Snail kite dynamics and was able to detect a potential phenological shift in the environmental dependence of Snail kites. Our work provides a statistical framework for reliably detecting population-environment interactions from coarsely surveyed time series. An important implication of this work is that the low predictability of animal population growth by weather variables found in previous studies may be due, in part, to how these data are utilized as covariates. © 2017 by the Ecological Society of America.
Detecting population–environmental interactions with mismatched time series data
Ferguson, Jake M.; Reichert, Brian E.; Fletcher, Robert J.; Jager, Henriëtte I.
2017-01-01
Time series analysis is an essential method for decomposing the influences of density and exogenous factors such as weather and climate on population regulation. However, there has been little work focused on understanding how well commonly collected data can reconstruct the effects of environmental factors on population dynamics. We show that, analogous to similar scale issues in spatial data analysis, coarsely sampled temporal data can fail to detect covariate effects when interactions occur on timescales that are fast relative to the survey period. We propose a method for modeling mismatched time series data that couples high-resolution environmental data to low-resolution abundance data. We illustrate our approach with simulations and by applying it to Florida’s southern Snail kite population. Our simulation results show that our method can reliably detect linear environmental effects and that detecting nonlinear effects requires high-resolution covariate data even when the population turnover rate is slow. In the Snail kite analysis, our approach performed among the best in a suite of previously used environmental covariates explaining Snail kite dynamics and was able to detect a potential phenological shift in the environmental dependence of Snail kites. Our work provides a statistical framework for reliably detecting population–environment interactions from coarsely surveyed time series. An important implication of this work is that the low predictability of animal population growth by weather variables found in previous studies may be due, in part, to how these data are utilized as covariates. PMID:28759123
Massad, Tara Joy
2013-05-01
The effect of herbivory on plant performance is the subject of a large number of ecological studies, and plant responses to herbivory range from reduced reproduction to overcompensation. Because plant defenses, stored resources, and allocation demands change throughout a plant's lifetime, it can be hypothesized the effects of herbivory also vary with development. The present work extends previous analyses to incorporate hundreds of studies in a new meta-analysis addressing this topic. Herbivores had an overall negative effect on plant growth and reproduction, and, in contrast to a previous meta-analysis, this work shows the timing of herbivory is relevant. Differences in the effects of herbivory between life stages existed for woody plant reproduction and perennial herb growth. In addition, tree and shrub growth was reduced by herbivore damage at early ontogenetic stages, and perennial herb reproduction was limited by adult stage herbivory. These results partially support the continuum of an ontogenetic response model. Finally, consideration of this synthesis in conjunction with other work led to the conclusion that different plant groups optimize their defense investments in unique ways. Slow-growing plants may strongly chemically defend young tissues, supporting the plant-age hypothesis, because early herbivory is detrimental to growth. Faster-growing herbs may invest more in antiherbivore defense when they are older, supporting the growth-differentiation balance hypothesis, because later herbivory limits their reproduction.
Raising household saving: does financial education work?
Gale, William G; Harris, Benjamin H; Levine, Ruth
2012-01-01
This article highlights the prevalence and economic outcomes of financial illiteracy among American households, and reviews previous research that examines how improving financial literacy affects household saving. Analysis of the research literature suggests that previous financial literacy efforts have yielded mixed results. Evidence suggests that interventions provided for employees in the workplace have helped increase household saving, but estimates of the magnitude of the impact vary widely. For financial education initiatives targeted to other groups, the evidence is much more ambiguous, suggesting a need for more econometrically rigorous evaluations.
Zelik, Karl E; Takahashi, Kota Z; Sawicki, Gregory S
2015-03-01
Measuring biomechanical work performed by humans and other animals is critical for understanding muscle-tendon function, joint-specific contributions and energy-saving mechanisms during locomotion. Inverse dynamics is often employed to estimate joint-level contributions, and deformable body estimates can be used to study work performed by the foot. We recently discovered that these commonly used experimental estimates fail to explain whole-body energy changes observed during human walking. By re-analyzing previously published data, we found that about 25% (8 J) of total positive energy changes of/about the body's center-of-mass and >30% of the energy changes during the Push-off phase of walking were not explained by conventional joint- and segment-level work estimates, exposing a gap in our fundamental understanding of work production during gait. Here, we present a novel Energy-Accounting analysis that integrates various empirical measures of work and energy to elucidate the source of unexplained biomechanical work. We discovered that by extending conventional 3 degree-of-freedom (DOF) inverse dynamics (estimating rotational work about joints) to 6DOF (rotational and translational) analysis of the hip, knee, ankle and foot, we could fully explain the missing positive work. This revealed that Push-off work performed about the hip may be >50% greater than conventionally estimated (9.3 versus 6.0 J, P=0.0002, at 1.4 m s(-1)). Our findings demonstrate that 6DOF analysis (of hip-knee-ankle-foot) better captures energy changes of the body than more conventional 3DOF estimates. These findings refine our fundamental understanding of how work is distributed within the body, which has implications for assistive technology, biomechanical simulations and potentially clinical treatment. © 2015. Published by The Company of Biologists Ltd.
Variability of the proton-to-electron mass ratio on cosmological scales
NASA Astrophysics Data System (ADS)
Wendt, M.; Reimers, D.
2008-10-01
The search for a possible variation of fundamental physical constants isnewsworthy more than ever. A multitude of methods were developed. So far theonly seemingly significant indication of a cosmological variation existsfor the proton-to-electron massratio as stated by Reinhold et al. [1]. The measuredindication of variation is based on the combined analysis of H2 absorptionsystems in the spectra of Q0405-443 and Q0347-383 at zabs=2.595 and zabs=3.025, respectively. The high resolution data of the latteris reanalyzed in this work to examine the influence of different fittingprocedures and further potential nonconformities. This analysis cannotreproduce the significance achieved by the previous works.
Clemente, M; Goggiamani, A
2012-01-01
The authors analyze the budget accident at work and occupational diseases in the construction industry through the data banks Inail. This analysis is carried out by comparing the data for this sector of economic activity (classification of economic activities ATECO 2002) with those general with particular attention to how an event, occurrence, mortality, by plotting the trends of this phenomenon than in previous years. It also analyzes the phenomenon of the complaints of occupational diseases with the comparison with the general data as well as with the analysis of the most frequent types of occupational diseases in this sector in the last two years.
Documentation of indigenous Pacific agroforestry systems: a review of methodologies
Bill Raynor
1993-01-01
Recent interest in indigenous agroforestry has led to a need for documentation of these systems. However, previous work is very limited, and few methodologies are well-known or widely accepted. This paper outlines various methodologies (including sampling methods, data to be collected, and considerations in analysis) for documenting structure and productivity of...
Automated Analysis of CT Images for the Inspection of Hardwood Logs
Harbin Li; A. Lynn Abbott; Daniel L. Schmoldt
1996-01-01
This paper investigates several classifiers for labeling internal features of hardwood logs using computed tomography (CT) images. A primary motivation is to locate and classify internal defects so that an optimal cutting strategy can be chosen. Previous work has relied on combinations of low-level processing, image segmentation, autoregressive texture modeling, and...
ERIC Educational Resources Information Center
Ramful, Ajay; Nenduradu, Rajeev
2013-01-01
While previous work in the domain of proportional reasoning has primarily focused on the coordination of integer quantities, this study investigates how students coordinate fractional quantities. Fine-grained analysis of two seventh graders' responses to a set of systematically designed proportional tasks, shows how their knowledge of…
Historical Analysis of the Inorganic Chemistry Curriculum Using ACS Examinations as Artifacts
ERIC Educational Resources Information Center
Srinivasan, Shalini; Reisner, Barbara A.; Smith, Sheila R.; Stewart, Joanne L.; Johnson, Adam R.; Lin, Shirley; Marek, Keith A.; Nataro, Chip; Murphy, Kristen L.; Raker, Jeffrey R.
2018-01-01
ACS Examinations provide a lens through which to examine historical changes in topic coverage via analyses of course-specific examinations. This study is an extension of work completed previously by the ACS Exams Research Staff and collaborators in general chemistry, organic chemistry, and physical chemistry to explore content changes in the…
2012-01-01
EMG studies). Data Management and Analysis Descriptive statistics for subject demographics and nerve conduction study variables were calculated using...military N/A Family history of CTS; previous work history as electrician, guitar player 49 (R) None N/A Dental assistant; waiter NCS indicates
ERIC Educational Resources Information Center
Bouapao, Lytou; Sengchandavong, Ouam; Sihavong, Siphandone
This study provides an indepth description of financial management and budgetary procedures for education as well as a detailed analysis of major problems, recent developments, and new issues in Cambodia, Laos, and Vietnam. Laos, formerly one of the centrally planned economies, was previously considered "dormant" because of its limited…
Preliminary Experiments with a Triple-Layer Phoswich Detector for Radioxenon Detection
2008-09-01
Figure 7b; with a significant attenuation which was predicted by our MCNP modeling (Farsoni et al., 2007). The 81 keV peak in the NaI spectrum has a...analysis technique and confirmed our previous MCNP modeling. Our future work includes use of commercially available radioxenon gas (133Xe) to test
A Re-Examination of the Community of Inquiry Framework: Social Network and Content Analysis
ERIC Educational Resources Information Center
Shea, Peter; Hayes, Suzanne; Vickers, Jason; Gozza-Cohen, Mary; Uzuner, Sedef; Mehta, Ruchi; Valchova, Anna; Rangan, Prahalad
2010-01-01
This study provides a simultaneous examination of all components of the Community of Inquiry (CoI) framework (Garrison, Anderson & Archer, 2000; Anderson, Rourke, Garrison & Archer, 2001; and Rourke, Garrison, Anderson & Archer, 1999) and seeks to extend previous work into the nature, development, and relationships between the constructs of…
Assessment of Infant Cry: Acoustic Cry Analysis and Parental Perception
ERIC Educational Resources Information Center
LaGasse, Linda L.; Neal, A. Rebecca; Lester, Barry M.
2005-01-01
Infant crying signals distress to potential caretakers who can alleviate the aversive conditions that gave rise to the cry. The cry signal results from coordination among several brain regions that control respiration and vocal cord vibration from which the cry sounds are produced. Previous work has shown a relationship between acoustic…
Mission analysis of solar powered aircraft
NASA Technical Reports Server (NTRS)
Hall, D. W.; Watson, D. A.; Tuttle, R. P.; Hall, S. A.
1985-01-01
The effect of a real mission scenario on a solar powered airplane configuration which had been developed in previous work were assessed. The mission used was surveillance of crop conditions over a route from Phoenix to Tucson to Tombstone, Arizona. Appendices are attached which address the applicability of existing platforms and payloads to do this mission.
ERIC Educational Resources Information Center
Christopher, Micaela E.; Miyake, Akira; Keenan, Janice M.; Pennington, Bruce; DeFries, John C.; Wadsworth, Sally J.; Willcutt, Erik; Olson, Richard K.
2012-01-01
The present study explored whether different executive control and speed measures (working memory, inhibition, processing speed, and naming speed) independently predict individual differences in word reading and reading comprehension. Although previous studies suggest these cognitive constructs are important for reading, the authors analyze the…
Dibromoacetic acid (DBA) and bromochloroacetic acid (BCA) are prevalent disinfection by-products of drinking water known to produce defects in spermatogenesis and fertility in adult rats. Previous work in our laboratory demonstated a high correlation between fertility of sperm fr...
Appraising Lexical Bundles in Mathematics Classroom Discourse: Obligation and Choice
ERIC Educational Resources Information Center
Herbel-Eisenmann, Beth; Wagner, David
2010-01-01
Working from a large corpus of transcripts from secondary mathematics classrooms, we identify patterns of speech that encode interpersonal positioning. We extend our analysis from a previous article (Herbel-Eisenmann, Wagner & Cortes, Educ Stud Math, 2010, in press), in which we introduced a concept from corpus linguistics--a "lexical bundle,"…
Supercritical wing sections 2, volume 108
NASA Technical Reports Server (NTRS)
Bauer, F.; Garabedian, P.; Korn, D.; Jameson, A.; Beckmann, M. (Editor); Kuenzi, H. P. (Editor)
1975-01-01
A mathematical theory for the design and analysis of supercritical wing sections was previously presented. Examples and computer programs showing how this method works were included. The work on transonics is presented in a more definitive form. For design, a better model of the trailing edge is introduced which should eliminate a loss of fifteen or twenty percent in lift experienced with previous heavily aft loaded models, which is attributed to boundary layer separation. How drag creep can be reduced at off-design conditions is indicated. A rotated finite difference scheme is presented that enables the application of Murman's method of analysis in more or less arbitrary curvilinear coordinate systems. This allows the use of supersonic as well as subsonic free stream Mach numbers and to capture shock waves as far back on an airfoil as desired. Moreover, it leads to an effective three dimensional program for the computation of transonic flow past an oblique wing. In the case of two dimensional flow, the method is extended to take into account the displacement thickness computed by a semi-empirical turbulent boundary layer correction.
Whistler waves with electron temperature anisotropy and non-Maxwellian distribution functions
NASA Astrophysics Data System (ADS)
Malik, M. Usman; Masood, W.; Qureshi, M. N. S.; Mirza, Arshad M.
2018-05-01
The previous works on whistler waves with electron temperature anisotropy narrated the dependence on plasma parameters, however, they did not explore the reasons behind the observed differences. A comparative analysis of the whistler waves with different electron distributions has not been made to date. This paper attempts to address both these issues in detail by making a detailed comparison of the dispersion relations and growth rates of whistler waves with electron temperature anisotropy for Maxwellian, Cairns, kappa and generalized (r, q) distributions by varying the key plasma parameters for the problem under consideration. It has been found that the growth rate of whistler instability is maximum for flat-topped distribution whereas it is minimum for the Maxwellian distribution. This work not only summarizes and complements the previous work done on the whistler waves with electron temperature anisotropy but also provides a general framework to understand the linear propagation of whistler waves with electron temperature anisotropy that is applicable in all regions of space plasmas where the satellite missions have indicated their presence.
Current Issues and Challenges in Global Analysis of Parton Distributions
NASA Astrophysics Data System (ADS)
Tung, Wu-Ki
2007-01-01
A new implementation of precise perturbative QCD calculation of deep inelastic scattering structure functions and cross sections, incorporating heavy quark mass effects, is applied to the global analysis of the full HERA I data sets on NC and CC cross sections, in conjunction with other experiments. Improved agreement between the NLO QCD theory and the global data sets are obtained. Comparison of the new results to that of previous analysis based on conventional zero-mass parton formalism is made. Exploratory work on implications of new fixed-target neutrino scattering and Drell-Yan data on global analysis is also discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1981-01-01
This bibliography contains general studies as well as chemical analysis of archaeological specimens. The chemical analysis is mainly activation analysis of articles such as metals, pottery, coins, paintings, soils, glass and paper from Medieval, Grecian, Egyptian, Mayan, and prehistoric times. The general studies include results of excavation from the United States. Also covered is work on preservation of artifacts and remote sensing for the site location. (This updated bibliography contains 237 citations, none of which are new entries to the previous edition.)
Single cell array impedance analysis in a microfluidic device
NASA Astrophysics Data System (ADS)
Altinagac, Emre; Taskin, Selen; Kizil, Huseyin
2016-10-01
Impedance analysis of single cells is presented in this paper. Following the separation of a target cell type by dielectrophoresis in our previous work, this paper focuses on capturing the cells as a single array and performing impedance analysis to point out the signature difference between each cell type. Lab-on-a-chip devices having a titanium interdigitated electrode layer on a glass substrate and a PDMS microchannel are fabricated to capture each cell in a single form and perform impedance analysis. HCT116 (homosapiens colon colorectal carcin) and HEK293 (human embryonic kidney) cells are used in our experiments.
Exergy Analysis of Rocket Systems
NASA Technical Reports Server (NTRS)
Gilbert, Andrew; Mesmer, Bryan; Watson, Michael D.
2015-01-01
Exergy is defined as the useful work available from a system in a specified environment. Exergy analysis allows for comparison between different system designs, and allows for comparison of subsystem efficiencies within system designs. The proposed paper explores the relationship between the fundamental rocket equation and an exergy balance equation. A previously derived exergy equation related to rocket systems is investigated, and a higher fidelity analysis will be derived. The exergy assessments will enable informed, value-based decision making when comparing alternative rocket system designs, and will allow the most efficient configuration among candidate configurations to be determined.
Analysis of advanced solid rocket motor ignition phenomena
NASA Technical Reports Server (NTRS)
Foster, Winfred A., Jr.; Jenkins, Rhonald M.
1995-01-01
This report presents the results obtained from an experimental analysis of the flow field in the slots of the star grain section in the head-end of the advanced solid rocket motor during the ignition transient. This work represents an extension of the previous tests and analysis to include the effects of using a center port in conjunction with multiple canted igniter ports. The flow field measurements include oil smear data on the star slot walls, pressure and heat transfer coefficient measurements on the star slot walls and velocity measurements in the star slot.
NASA Astrophysics Data System (ADS)
Mori, Kaya; Chonko, James C.; Hailey, Charles J.
2005-10-01
We have reanalyzed the 260 ks XMM-Newton observation of 1E 1207.4-5209. There are several significant improvements over previous work. First, a much broader range of physically plausible spectral models was used. Second, we have used a more rigorous statistical analysis. The standard F-distribution was not employed, but rather the exact finite statistics F-distribution was determined by Monte Carlo simulations. This approach was motivated by the recent work of Protassov and coworkers and Freeman and coworkers. They demonstrated that the standard F-distribution is not even asymptotically correct when applied to assess the significance of additional absorption features in a spectrum. With our improved analysis we do not find a third and fourth spectral feature in 1E 1207.4-5209 but only the two broad absorption features previously reported. Two additional statistical tests, one line model dependent and the other line model independent, confirmed our modified F-test analysis. For all physically plausible continuum models in which the weak residuals are strong enough to fit, the residuals occur at the instrument Au M edge. As a sanity check we confirmed that the residuals are consistent in strength and position with the instrument Au M residuals observed in 3C 273.
Technologies for Nondestructive Evaluation of Surfaces and Thin Coatings
NASA Technical Reports Server (NTRS)
1999-01-01
The effort included in this project included several related activities encompassing basic understanding, technological development, customer identification and commercial transfer of several methodologies for nondestructive evaluation of surfaces and thin surface coatings. Consistent with the academic environment, students were involved in the effort working with established investigators to further their training, provide a nucleus of experienced practitioners in the new technologies during their industrial introduction, and utilize their talents for project goals. As will be seen in various portions of the report, some of the effort has led to commercialization. This process has spawned other efforts related to this project which are supported from outside sources. These activities are occupying the efforts of some of the people who were previously supported within this grant and its predecessors. The most advanced of the supported technologies is thermography, for which the previous joint efforts of the investigators and NASA researchers have developed several techniques for extending the utility of straight thermographic inspection by producing methods of interpretation and analysis accessible to automatic image processing with computer data analysis. The effort reported for this technology has been to introduce the techniques to new user communities, who are then be able to add to the effective uses of existing products with only slight development work. In a related development, analysis of a thermal measurement situation in past efforts led to a new insight into the behavior of simple temperature probes. This insight, previously reported to the narrow community in which the particular measurement was made, was reported to the community of generic temperature measurement experts this year. In addition to the propagation of mature thermographic techniques, the development of a thermoelastic imaging system has been an important related development. Part of the work carried out in the effort reported here has been to prepare reports introducing the newly commercially available thermoelastic measurements to the appropriate user communities.
Analysis of a front suspension system for UniART FSAE car using FEA
NASA Astrophysics Data System (ADS)
Zaidie, M. N. A.; Hashim, M. S. M.; Tasyrif, M.; Basha, M. H.; Ibrahim, I.; Kamaruddin, N. S.; Shahriman, A. B.
2017-10-01
In recent years, many research works from institutions that participated in Formula SAE had highlighted on suspension systems. The aim is to improve the system in term of performance and robustness. However, every suspension system for a racing car is tailored to the car itself. Thus, this paper proposes a new design for front suspension system for UniART FSAE car. The new design was than being compared to the previous suspension system for enhancement. The analysis covered in this paper based on several conditions such as braking, cornering and bumping condition and was carried out using finite element analysis. Each main component for the suspension system such as lower arm, upper arm and knuckle has been analysed in term of strength and performance. From the results, the proposed new design of the suspension system has improved in term of strength and performance compared to the previous suspension system.
Rhythmic patterning in Malaysian and Singapore English.
Tan, Rachel Siew Kuang; Low, Ee-Ling
2014-06-01
Previous work on the rhythm of Malaysian English has been based on impressionistic observations. This paper utilizes acoustic analysis to measure the rhythmic patterns of Malaysian English. Recordings of the read speech and spontaneous speech of 10 Malaysian English speakers were analyzed and compared with recordings of an equivalent sample of Singaporean English speakers. Analysis was done using two rhythmic indexes, the PVI and VarcoV. It was found that although the rhythm of read speech of the Singaporean speakers was syllable-based as described by previous studies, the rhythm of the Malaysian speakers was even more syllable-based. Analysis of the syllables in specific utterances showed that Malaysian speakers did not reduce vowels as much as Singaporean speakers in cases of syllables in utterances. Results of the spontaneous speech confirmed the findings for the read speech; that is, the same rhythmic patterning was found which normally triggers vowel reductions.
13C labeling analysis of sugars by high resolution-mass spectrometry for metabolic flux analysis.
Acket, Sébastien; Degournay, Anthony; Merlier, Franck; Thomasset, Brigitte
2017-06-15
Metabolic flux analysis is particularly complex in plant cells because of highly compartmented metabolism. Analysis of free sugars is interesting because it provides data to define fluxes around hexose, pentose, and triose phosphate pools in different compartment. In this work, we present a method to analyze the isotopomer distribution of free sugars labeled with carbon 13 using a liquid chromatography-high resolution mass spectrometry, without derivatized procedure, adapted for Metabolic flux analysis. Our results showed a good sensitivity, reproducibility and better accuracy to determine isotopic enrichments of free sugars compared to our previous methods [5, 6]. Copyright © 2017 Elsevier Inc. All rights reserved.
Nonlinear regimes on polygonal hydraulic jumps
NASA Astrophysics Data System (ADS)
Rojas, Nicolas
2016-11-01
This work extends previous leading and higher order results on the polygonal hydraulic jump in the framework of inertial lubrication theory. The rotation of steady polygonal jumps is observed in the transition from one wavenumber to the next one, induced by a change in height of an external obstacle near the outer edge. In a previous publication, the study of stationary polygons is considered under the assumption that the reference frame rotates with the polygons when the number of corners change, in order to preserve their orientation. In this research work I provide a Hamiltonian approach and the stability analysis of the nonlinear oscillator that describe the polygonal structures at the jump interface, in addition to a perturbation method that enables to explain, for instance, the diversity of patterns found in experiments. GRASP, Institute of Physics, University of Liege, Belgium.
Inchauspe, Adrián Angel
2016-01-01
AIM: To present an inclusion criterion for patients who have suffered bilateral amputation in order to be treated with the supplementary resuscitation treatment which is hereby proposed by the author. METHODS: This work is based on a Retrospective Cohort model so that a certainly lethal risk to the control group is avoided. RESULTS: This paper presents a hypothesis on acupunctural PC-9 Zhong chong point, further supported by previous statistical work recorded for the K-1 Yong quan resuscitation point. CONCLUSION: Thanks to the application of the resuscitation maneuver herein proposed on the previously mentioned point, patients with bilateral amputation would have another alternative treatment available in case basic and advanced CPR should fail. PMID:27152257
Work and excessive sleepiness among Brazilian evening high school students: effects on days off.
Teixeira, Liliane; Lowden, Arne; Moreno, Claudia Roberta; Turte, Samantha; Nagai, Roberta; Latorre, Maria Do Rosário; Valente, Daniel; Fischer, Frida Marina
2010-01-01
Previous studies have revealed that students who work and study build up sleep deficits during the workweek, which can trigger a sleep rebound during days off. The objective of this study was to investigate the impact of working/non-working on sleepiness during days off among high school students. The study population, aged 14-21 years, attended evening classes in São Paulo, Brazil. For the study, the students completed questionnaires on living conditions, health, and work; wore actigraphs; and completed the Karolinska Sleepiness Scale (KSS). To predict sleepiness, a logistic regression analysis was performed. Excessive sleepiness was observed on the first day off among working students. Results suggest that working is a significant predictor for sleepiness and that two shifts of daily systematic activities, study and work, might lead to excessive daytime sleepiness on the first day off. Further, this observed excessive sleepiness may reflect the sleep debt accumulated during the workweek.
Cowan, Nelson; Saults, J Scott
2013-02-01
It is often proposed that individuals with high working memory span overcome proactive interference (PI) from previous trials, saving working memory for task-relevant items. We examined this hypothesis in word-list probe recognition. We found no difference in PI related to span. Instead, ex-gaussian analysis of reaction time showed speed advantages for high spans specific to short lists (3 or 4 items) but absent from longer lists (6 or 8 items). We suggest that high-span advantages in reaction time are based on finesse during easy trials, not on overcoming PI. 2013 APA, all rights reserved
Associations of self estimated workloads with musculoskeletal symptoms among hospital nurses
Ando, S.; Ono, Y.; Shimaoka, M.; Hiruta, S.; Hattori, Y.; Hori, F.; Takeuchi, Y.
2000-01-01
OBJECTIVES—To investigate the prevalence of neck, shoulder, and arm pain (NSAP) as well as low back pain (LBP) among hospital nurses, and to examine the association of work tasks and self estimated risk factors with NSAP and LBP. METHODS—A cross sectional study was carried out in a national university hospital in Japan. Full time registered nurses in the wards (n=314) were selected for analysis. The questionnaire was composed of items on demographic conditions, severity of workloads in actual tasks, self estimated risk factors for fatigue, and musculoskeletal pain in the previous month. Rate ratios (RRs) and 95% confidence intervals (95% CIs) were calculated by the Cox's proportional hazards model to study the association of pain with variables related to work and demographic conditions. RESULTS—The prevalences of low back, shoulder, neck, and arm pain in the previous month were 54.7%, 42.8%, 31.3%, and 18.6%, respectively. The prevalence of musculoskeletal symptoms among hospital nurses was higher than in previous studies. In the Cox's models for LBP and NSAP, there were no significant associations between musculoskeletal pain and the items related to work and demographic conditions. The RRs for LBP tended to be relatively higher for "accepting emergency patients" and some actual tasks. Some items of self estimated risk factors for fatigue tended to have relatively higher RRs for LBP and NSAP. CONCLUSIONS—It was suggested that musculoskeletal pain among hospital nurses may have associations with some actual tasks and items related to work postures, work control, and work organisation. Further studies, however, are necessary, as clear evidence of this potential association was not shown in the study. Keywords: workloads; musculoskeletal pain; nurses PMID:10810105
Scerri, Anthony; Scerri, Charles
2017-11-08
Dementia training programmes for staff working in long-term care settings have been found to be effective in improving staff outcomes. This study investigated the impact of a dementia training programme for all Maltese nursing staff working in public nursing/residential homes on their knowledge, attitudes and confidence. Additionally, we identified the predictors of these domains before and after the programme. A 14-hour training programme focusing on dementia management, care and policy was developed for all nursing staff working in public nursing and residential homes in Malta. A pretest-posttest design was used to evaluate the participants' knowledge of dementia, attitudes and confidence in working with residents with dementia using validated tools. Demographic variables were measured and compared with each staff domain. The majority of nursing staff attended the training programme with 261 fully completed questionnaires being collected pre-training and 214 post-training. The programme significantly improved nursing staff knowledge, attitudes and confidence. Stepwise regression analysis of each staff domain showed that the strongest predictor in all models at pre-training was the intensity of previous training programmes. Furthermore, staff who attended previous training continued to improve in their attitudes and confidence following programme completion. The study continues to shed further evidence on the impact of dementia training programs on staff outcomes. It also indicated that the intensity of previous participation in dementia training programmes was related to the participants' knowledge, attitudes and confidence and that continual exposure to training had a cumulative effect.
Night work and prostate cancer in men: a Swedish prospective cohort study
Åkerstedt, Torbjrn; Narusyte, Jurgita; Svedberg, Pia; Kecklund, Göran; Alexanderson, Kristina
2017-01-01
Objectives Prostate cancer is the most common cancer and the second leading cause of cancer-related deaths among men, but the contributing factors are unclear. One such may be night work because of the day/night alternation of work and the resulting disturbance of the circadian system. The purpose of the present study was to investigate the prospective relation between number of years with night work and prostate cancer in men. Design Cohort study comparing night and day working twins with respect to incident prostate cancer in 12 322 men. Setting Individuals in the Swedish Twin Registry. Participants 12 322 male twins. Outcome measures Prostate cancer diagnoses obtained from the Swedish Cancer Registry with a follow-up time of 12 years, with a total number of cases=454. Results Multiple Cox proportional hazard regression analysis, adjusted for a number of covariates, showed no association between ever night work and prostate cancer, nor for duration of night work and prostate cancer. Analysis of twin pairs discordant for prostate cancer (n=332) showed no significant association between night work and prostate cancer. Conclusions The results, together with previous studies, suggest that night work does not seem to constitute a risk factor for prostate cancer. PMID:28600375
Weather is the main driver in both plant use of nutrients and fate and transport of nutrients in the environment. In previous work, we evaluated a green tax for control of agricultural nutrients in a bi-level optimization framework that linked deterministic models. In this study,...
Predictive Cache Modeling and Analysis
2011-11-01
metaheuristic /bin-packing algorithm to optimize task placement based on task communication characterization. Our previous work on task allocation showed...Cache Miss Minimization Technology To efficiently explore combinations and discover nearly-optimal task-assignment algorithms , we extended to our...it was possible to use our algorithmic techniques to decrease network bandwidth consumption by ~25%. In this effort, we adapted these existing
The Effects of Education Quality on Income Growth and Mortality Decline
ERIC Educational Resources Information Center
Jamison, Eliot A.; Jamison, Dean T.; Hanushek, Eric A.
2007-01-01
Previous work shows that higher levels of education quality (as measured by international student achievement tests) increase growth rates of national income. This paper begins by confirming those findings in an analysis involving more countries over more time with additional controls. We then use the panel structure of our data to assess whether…
Modifying Taper-Derived Merchantable Height Estimates to Account for Tree Characteristics
James A. Westfall
2006-01-01
The U.S. Department of Agriculture Forest Service Northeastern Forest Inventory and Analysis program (NE-FIA) is developing regionwide tree-taper equations. Unlike most previous work on modeling tree form, this effort necessarily includes a wide array of tree species. For some species, branching patterns can produce undesirable tree form that reduces the merchantable...
Unit area control--its development and application
William E. Hallin
1954-01-01
Thirty years of research in the ponderosa pine and mixed conifer forests of the Sierra of California by Dunning and his associates have shown that previous methods of silviculture were not providing adequate restocking of pine. Analysis of records indicated a new approach was necessary. From this work, new procedures that gave most promise of success were formulated...
ERIC Educational Resources Information Center
May, Josephine
2018-01-01
Building on the author's previous work on Australian national cinema and schooling, this article explores the representation of the female primary school teacher in the television mini-series entitled "Marion" (Australian Broadcasting Commission, 1974). Using narrative analysis, it argues that this representation is disruptive of…
Duncan S. Wilson; Paul D. Anderson; Klaus J. Puettmann
2009-01-01
We attempted to extend the inference scope of several detailed songbird habitat restoration studies in western Oregon to the broader region through a reanalysis and synthesis of five largescale management experiments. This previous work demonstrated the importance of understorey vegetation to songbird habitat. However, individual studies have shown conflicting results...
ERIC Educational Resources Information Center
Settlage, Daniel Murray; Wollscheid, Jim R.
2015-01-01
The Major Field Test is a commonly used assessment instrument, but little emphasis has been put on analyzing student-level subject area indicator scores. The Educational Testing Service recently made these data available to institutions, and it is analyzed here. This analysis builds on previous work by incorporating demographic and programmatic…
Incidence and impact of damage to Virginia's timber, 1986
Cindy M. Huber; Joe P. McClure; Noel D. Cost
1987-01-01
This bulletin reports survey data on agents damaging trees in Virginia's forests. Data were collected in 1984 and 1985 by the Forest Inventory and Analysis Work Unit of the Southeastern Forest Experiment Station. This effort was part of the fifth inventory of the State's forests. Damage information similiar to the previous survey was gathered for this...
Integrated Formal Analysis of Timed-Triggered Ethernet
NASA Technical Reports Server (NTRS)
Dutertre, Bruno; Shankar, Nstarajan; Owre, Sam
2012-01-01
We present new results related to the verification of the Timed-Triggered Ethernet (TTE) clock synchronization protocol. This work extends previous verification of TTE based on model checking. We identify a suboptimal design choice in a compression function used in clock synchronization, and propose an improvement. We compare the original design and the improved definition using the SAL model checker.
The dynamic spillover of satisfaction between work and marriage: the role of time and mood.
Heller, Daniel; Watson, David
2005-11-01
Previous research has indicated important linkages between work and family domains and roles. However, the nature of the dynamic spillover between job and marital satisfaction remains poorly understood. The current study tests both the concurrent and lagged associations between job and marital satisfaction at a within-individual level of analysis using a diary study of 76 fully employed, married adults. The authors further examine the mediating role of mood in this spillover process. Consistent with their hypotheses, findings indicate both a concurrent and a lagged (job to marital and marital to job) job satisfaction-marital satisfaction association at the within-subject level of analysis and lend some support for the mediating role of mood (most notably positive affect) in these associations. The authors hope these findings stimulate new research that uses more complex designs and comprehensive theoretical models to investigate work-family links. ((c) 2005 APA, all rights reserved).
Analysis of Former Learning Assistants' Views on Cooperative Learning
NASA Astrophysics Data System (ADS)
Gray, Kara E.; Otero, Valerie K.
2009-11-01
The University of Colorado Learning Assistant (LA) program integrates a weekly education seminar, meetings with science faculty to review content, and a semester-long teaching experience that hires undergraduates to work with groups of students in university science courses. Following this three-pronged learning experience, some of the LAs continue into the teacher certification program. While previous research has shown that this model has more than doubled the number of science and math majors graduating with a teaching certification, the question remains whether these teachers are better prepared to teach. The analysis presented here addresses this question by comparing the views of former LAs to the views of comparable teachers on the issue of cooperative learning. Interviews were conducted with ten middle school and high school science teachers throughout their first year of teaching. Results suggest differences in former LAs views toward group work and their purposes for using group work.
MALDI-MS analysis and imaging of small molecule metabolites with 1,5-diaminonaphthalene (DAN).
Korte, Andrew R; Lee, Young Jin
2014-08-01
1,5-Diaminonaphthalene (DAN) has previously been reported as an effective matrix for matrix-assisted laser desorption ionization-mass spectrometry of phospholipids. In the current work, we investigate the use of DAN as a matrix for small metabolite analysis in negative ion mode. DAN was found to provide superior ionization to the compared matrices for MW < ~400 Da; however, 9-aminoacridine (9-AA) was found to be superior for a uridine diphosphate standard (MW 566 Da). DAN was also found to provide a more representative profile of a natural phospholipid mixture than 9-AA. Finally, DAN and 9-AA were applied for imaging of metabolites directly from corn leaf sections. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.
Analysis of Network Clustering Algorithms and Cluster Quality Metrics at Scale
Kobourov, Stephen; Gallant, Mike; Börner, Katy
2016-01-01
Overview Notions of community quality underlie the clustering of networks. While studies surrounding network clustering are increasingly common, a precise understanding of the realtionship between different cluster quality metrics is unknown. In this paper, we examine the relationship between stand-alone cluster quality metrics and information recovery metrics through a rigorous analysis of four widely-used network clustering algorithms—Louvain, Infomap, label propagation, and smart local moving. We consider the stand-alone quality metrics of modularity, conductance, and coverage, and we consider the information recovery metrics of adjusted Rand score, normalized mutual information, and a variant of normalized mutual information used in previous work. Our study includes both synthetic graphs and empirical data sets of sizes varying from 1,000 to 1,000,000 nodes. Cluster Quality Metrics We find significant differences among the results of the different cluster quality metrics. For example, clustering algorithms can return a value of 0.4 out of 1 on modularity but score 0 out of 1 on information recovery. We find conductance, though imperfect, to be the stand-alone quality metric that best indicates performance on the information recovery metrics. Additionally, our study shows that the variant of normalized mutual information used in previous work cannot be assumed to differ only slightly from traditional normalized mutual information. Network Clustering Algorithms Smart local moving is the overall best performing algorithm in our study, but discrepancies between cluster evaluation metrics prevent us from declaring it an absolutely superior algorithm. Interestingly, Louvain performed better than Infomap in nearly all the tests in our study, contradicting the results of previous work in which Infomap was superior to Louvain. We find that although label propagation performs poorly when clusters are less clearly defined, it scales efficiently and accurately to large graphs with well-defined clusters. PMID:27391786
Analysis of Network Clustering Algorithms and Cluster Quality Metrics at Scale.
Emmons, Scott; Kobourov, Stephen; Gallant, Mike; Börner, Katy
2016-01-01
Notions of community quality underlie the clustering of networks. While studies surrounding network clustering are increasingly common, a precise understanding of the realtionship between different cluster quality metrics is unknown. In this paper, we examine the relationship between stand-alone cluster quality metrics and information recovery metrics through a rigorous analysis of four widely-used network clustering algorithms-Louvain, Infomap, label propagation, and smart local moving. We consider the stand-alone quality metrics of modularity, conductance, and coverage, and we consider the information recovery metrics of adjusted Rand score, normalized mutual information, and a variant of normalized mutual information used in previous work. Our study includes both synthetic graphs and empirical data sets of sizes varying from 1,000 to 1,000,000 nodes. We find significant differences among the results of the different cluster quality metrics. For example, clustering algorithms can return a value of 0.4 out of 1 on modularity but score 0 out of 1 on information recovery. We find conductance, though imperfect, to be the stand-alone quality metric that best indicates performance on the information recovery metrics. Additionally, our study shows that the variant of normalized mutual information used in previous work cannot be assumed to differ only slightly from traditional normalized mutual information. Smart local moving is the overall best performing algorithm in our study, but discrepancies between cluster evaluation metrics prevent us from declaring it an absolutely superior algorithm. Interestingly, Louvain performed better than Infomap in nearly all the tests in our study, contradicting the results of previous work in which Infomap was superior to Louvain. We find that although label propagation performs poorly when clusters are less clearly defined, it scales efficiently and accurately to large graphs with well-defined clusters.
Parker, Stephen; Meurk, Carla; Newman, Ellie; Fletcher, Clayton; Swinson, Isabella; Dark, Frances
2018-04-16
This study explores how consumers expect community-based residential mental health rehabilitation to compare with previous experiences of care. Understanding what consumers hope to receive from mental health services, and listening to their perspectives about what has and has not worked in previous care settings, may illuminate pathways to improved service engagement and outcomes. A mixed-methods research design taking a pragmatic approach to grounded theory guided the analysis of 24 semi-structured interviews with consumers on commencement at three Community Care Units (CCUs) in Australia. Two of these CCUs were trialling a staffing model integrating peer support work with clinical care. All interviews were conducted by an independent interviewer within the first 6 weeks of the consumer's stay. All participants expected the CCU to offer an improvement on previous experiences of care. Comparisons were made to acute and subacute inpatient settings, supported accommodation, and outpatient care. Consumers expected differences in the people (staff and co-residents), the focus of care, physical environ, and rules and regulations. Participants from the integrated staffing model sites articulated the expected value of a less clinical approach to care. Overall, consumers' expectations aligned with the principles articulated in policy frameworks for recovery-oriented practice. However, their reflections on past care suggest that these services continue to face significant challenges realizing these principles in practice. Paying attention to the kind of working relationship consumers want to have with mental health services, such as the provision of choice and maintaining a practical and therapeutic supportive focus, could improve their engagement and outcomes. © 2018 Australian College of Mental Health Nurses Inc.
Mendelism: New Insights from Gregor Mendel's Lectures in Brno.
Zhang, Hui; Chen, Wen; Sun, Kun
2017-09-01
Interpretation of Gregor Mendel's work has previously been based on study of his published paper "Experiments in Plant Hybridization." In contrast, the lectures that he gave preceding publication of this work have been largely neglected for more than 150 years. Here, we report on and interpret the content of Mendel's previous two lectures, as they were reported in a local newspaper. We comprehensively reference both the text of his paper and the historical background of his experiments. Our analysis shows that while Mendel had inherited the traditional research program on interspecific hybridization in plants, he introduced the novel method of ratio analysis for representing the variation of unit-characters among offspring of hybrids. His aim was to characterize and explain the developmental features of the distributional pattern of unit-characters in two series of hybrid experiments, using self-crosses and backcrosses with parents. In doing so, he not only answered the question of what the unit-characters were and the nature of their hierarchical classification, but also successfully inferred the numerical principle of unit-character transmission from generation to generation. He also established the nature of the composition and behaviors of reproductive cells from one generation to the next. Here we highlight the evidence from Mendel's lectures, clearly announcing that he had discovered the general law of cross-generation transmission of unit-characters through reproductive cells containing unit-factors. The recovered content of these previous lectures more accurately describes the work he performed with his garden peas than his published paper and shows how he first presented it in Brno. It is thus an invaluable resource for understanding the origin of the science of genetics. Copyright © 2017 by the Genetics Society of America.
Propulsion Technology Development for Sample Return Missions Under NASA's ISPT Program
NASA Technical Reports Server (NTRS)
Anderson, David J.; Pencil, Eric J.; Vento, Daniel; Dankanich, John W.; Munk, Michelle M.; Hahne, David
2011-01-01
The In-Space Propulsion Technology (ISPT) Program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. Sample return missions could be quite varied, from collecting and bringing back samples of comets or asteroids, to soil, rocks, or atmosphere from planets or moons. The paper will describe the ISPT Program s propulsion technology development activities relevant to future sample return missions. The sample return propulsion technology development areas for ISPT are: 1) Sample Return Propulsion (SRP), 2) Planetary Ascent Vehicles (PAV), 3) Entry Vehicle Technologies (EVT), and 4) Systems/mission analysis and tools that focuses on sample return propulsion. The Sample Return Propulsion area is subdivided into: a) Electric propulsion for sample return and low cost Discovery-class missions, b) Propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and c) Low TRL advanced propulsion technologies. The SRP effort will continue work on HIVHAC thruster development in FY2011 and then transitions into developing a HIVHAC system under future Electric Propulsion for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks will continue under advanced propulsion technologies for sample return with direct applicability to a Mars Sample Return (MSR) mission and with general applicability to all future planetary spacecraft. A major effort under the EVT area is multi-mission technologies for Earth Entry Vehicles (MMEEV), which will leverage and build upon previous work related to Earth Entry Vehicles (EEV). The major effort under the PAV area is the Mars Ascent Vehicle (MAV). The MAV is a new development area to ISPT, and builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies.
Men’s Facial Width-to-Height Ratio Predicts Aggression: A Meta-Analysis
Haselhuhn, Michael P.; Ormiston, Margaret E.; Wong, Elaine M.
2015-01-01
Recent research has identified men’s facial width-to-height ratio (fWHR) as a reliable predictor of aggressive tendencies and behavior. Other research, however, has failed to replicate the fWHR-aggression relationship and has questioned whether previous findings are robust. In the current paper, we synthesize existing work by conducting a meta-analysis to estimate whether and how fWHR predicts aggression. Our results indicate a small, but significant, positive relationship between men’s fWHR and aggression. PMID:25849992
Analysis of Hepatic Blood Flow Using Chaotic Models
Cohen, M. E.; Moazamipour, H.; Hudson, D. L.; Anderson, M. F.
1990-01-01
The study of chaos in physical systems is an important new theoretical development in modeling which has emerged in the last fifteen years. It is particularly useful in explaining phenomena which arise in nonlinear dynamic systems, for which previous mathematical models produced results with intractable solutions. Analysis of blood flow is such an application. In the work described here, chaotic models are used to analyze hepatic artery and portal vein blood flow obtained from a pulsed Doppler ultrasonic flowmeter implanted in dogs. ImagesFigure 3
NASA Technical Reports Server (NTRS)
Gibbel, Mark; Larson, Timothy
2000-01-01
An Engineering-of-Failure approach to designing and executing an accelerated product qualification test was performed to support a risk assessment of a "work-around" necessitated by an on-orbit failure of another piece of hardware on the Mars Global Surveyor spacecraft. The proposed work-around involved exceeding the previous qualification experience both in terms of extreme cold exposure level and in terms of demonstrated low cycle fatigue life for the power shunt assemblies. An analysis was performed to identify potential failure sites, modes and associated failure mechanisms consistent with the new use conditions. A test was then designed and executed which accelerated the failure mechanisms identified by analysis. Verification of the resulting failure mechanism concluded the effort.
Mathematical analysis of deception.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rogers, Deanna Tamae Koike; Durgin, Nancy Ann
This report describes the results of a three year research project about the use of deception in information protection. The work involved a collaboration between Sandia employees and students in the Center for Cyber Defenders (CCD) and at the University of California at Davis. This report includes a review of the history of deception, a discussion of some cognitive issues, an overview of previous work in deception, the results of experiments on the effects of deception on an attacker, and a mathematical model of error types associated with deception in computer systems.
Large angle magnetic suspension test fixture
NASA Technical Reports Server (NTRS)
Britcher, Colin P. (Principal Investigator); Huang, Jen-Kuang (Principal Investigator)
1996-01-01
Good progress is being made in several major areas. These include eddy current modelling and analysis, design optimization methods, wind tunnel Magnetic Suspension and Balance Systems (MSBS), payload pointing and vibration isolation systems, and system identification. In addition, another successful International Symposium has been completed, with the Proceedings being printed at the time of writing. These activities continue current work under this Grant and extend previous work on magnetic suspension systems and devices in the Guidance and Control Branch and will permit the demonstration of several new developments in the field of magnetic suspension technology.
Rouse, R A
1991-01-01
Work by both advertising and health researchers has independently yielded hierarchy of effects models which can be used to predict campaign success. Unfortunately, however, previous work has been criticized as "common sense" approaches which are more "assumed" than "proven." This analysis argues that much of the problem is due to the lack of precision often associated with over-simplified "uni-dimensional" models. Instead, this perspective synthesized a "two-dimensional" health hierarchy of effects model and outlines a pragmatic strategy for campaign measurement.
Revisiting Higgs inflation in the context of collapse theories
NASA Astrophysics Data System (ADS)
Rodriguez, Saul; Sudarsky, Daniel
2018-03-01
In this work we consider the Higgs inflation scenario, but in contrast with past works, the present analysis is done in the context of a spontaneous collapse theory for the quantum state of the inflaton field. In particular, we will rely on a previously studied adaptation of the Continuous Spontaneous Localization model for the treatment of inflationary cosmology. We will show that with the introduction of the dynamical collapse hypothesis, some of the most serious problems of the Higgs inflation proposal can be resolved in a natural way.
Analysis of construction injury burden by type of work.
Lowery, J T; Glazner, J; Borgerding, J A; Bondy, J; Lezotte, D C; Kreiss, K
2000-04-01
To lay groundwork for identifying patterns of injury etiology, we sought to describe injury experience associated with types of work performed at construction sites by examining workers' compensation (WC) claims for the 32,081 construction workers who built Denver International Airport (DIA). Injury rates and WC payment rates were calculated for 25 types of work based on claims and payroll data reported to DIA's owner-controlled insurance program according to National Council on Compensation Insurance job classifications. By linking DIA claims with corresponding lost-work-time (LWT) claims filed with Colorado's Workers' Compensation Division, we were also able to obtain and examine both total and median lost days for each type of work. Injury experience varied widely among the types of construction work. Workers building elevators and conduits and installing glass, metal, or steel were at particularly high risk of both LWT and non-LWT injury. Median days lost by injured workers was highest (202 days) for driving/trucking. Median days lost for most types of work was much greater than previously reported for construction: 40 days or more for 18 of the 25 types of work analyzed. WC payment rates reflect both number and severity of injuries and were generally not significantly different from expected losses. They were, however, significantly higher than expected for driving/trucking, metal/steel installation, inspection/analysis, and elevator construction. Analysis of injury data by type of work allows targeting of safety resources to high risk construction work and would be useful in prospective surveillance at large construction sites with centrally administered workers' compensation plans. Copyright 2000 Wiley-Liss, Inc.
NASA Astrophysics Data System (ADS)
Tang, Xiaolin; Yang, Wei; Hu, Xiaosong; Zhang, Dejiu
2017-02-01
In this study, based on our previous work, a novel simplified torsional vibration dynamic model is established to study the torsional vibration characteristics of a compound planetary hybrid propulsion system. The main frequencies of the hybrid driveline are determined. In contrast to vibration characteristics of the previous 16-degree of freedom model, the simplified model can be used to accurately describe the low-frequency vibration property of this hybrid powertrain. This study provides a basis for further vibration control of the hybrid powertrain during the process of engine start/stop.
McMunn, Anne; Lacey, Rebecca E; Kumari, Meena; Worts, Diana; McDonough, Peggy; Sacker, Amanda
2016-01-01
Background Previous studies have found generally better health among those who combine employment and family responsibilities; however, most research excludes men, and relies on subjective measures of health and information on work and family activities from only 1 or 2 time points in the life course. This study investigated associations between work-family life course types (LCTs) and markers of metabolic risk in a British birth cohort study. Methods Multichannel sequence analysis was used to generate work-family LCTs, combining annual information on work, partnership and parenthood between 16 and 42 years for men and women in the British National Child Development Study (NCDS, followed since their birth in 1958). Associations between work-family LCTs and metabolic risk factors in mid-life (age 44–45) were tested using multivariate linear regression in multiply imputed data. Results Life courses characterised by earlier transitions into parenthood were associated with significantly increased metabolic risk, regardless of attachment to paid work or marital stability over the life course. These associations were only partially attenuated by educational qualifications, early life circumstances and adult mediators. The positive association between weak labour markets ties and metabolic risk was weaker than might be expected from previous studies. Associations between work-family LCTs and metabolic risk factors did not differ significantly by gender. Conclusions Earlier transitions to parenthood are linked to metabolic risk in mid-life. PMID:26659761
Saponin Profile of Wild Asparagus Species.
Jaramillo-Carmona, Sara; Rodriguez-Arcos, Rocío; Jiménez-Araujo, Ana; López, Sergio; Gil, Juan; Moreno, Roberto; Guillén-Bejarano, Rafael
2017-03-01
The aim of this work was to study the saponin profiles from spears of different wild asparagus species in the context of its genetic diversity aside from geographical seed origin. They included Asparagus pseudoscaber Grecescu, Asparagus maritimus (L.) Mill., Asparagus brachiphyllus Turcz., Asparagus prostrates Dumort., and Asparagus officinalis L. The saponin analysis by LC-MS has shown that saponin profile from wild asparagus is similar to that previously described for triguero asparagus from Huétor-Tájar landrace (triguero HT), which had not ever been reported in the edible part of asparagus. All the samples, except A. officinalis, were characterized for having saponins distinct to protodioscin and the total saponin contents were 10-fold higher than those described for commercial hybrids of green asparagus. In particular, A. maritimus from different origins were rich in saponins previously found in triguero HT. These findings supported previous suggestion, based on genetic analysis, about A. maritimus being the origin of triguero HT. Multivariate statistics including principal component analysis and hierarchical clustering analysis were used to define both similarities and differences among samples. The results showed that the greatest variance of the tested wild asparagus could be attributed to differences in the concentration of particular saponins and this knowledge could be a tool for identifying similar species. © 2017 Institute of Food Technologists®.
Multi-Point Combustion System: Final Report
NASA Technical Reports Server (NTRS)
Goeke, Jerry; Pack, Spencer; Zink, Gregory; Ryon, Jason
2014-01-01
A low-NOx emission combustor concept has been developed for NASA's Environmentally Responsible Aircraft (ERA) program to meet N+2 emissions goals for a 70,000 lb thrust engine application. These goals include 75 percent reduction of LTO NOx from CAEP6 standards without increasing CO, UHC, or smoke from that of current state of the art. An additional key factor in this work is to improve lean combustion stability over that of previous work performed on similar technology in the early 2000s. The purpose of this paper is to present the final report for the NASA contract. This work included the design, analysis, and test of a multi-point combustion system. All design work was based on the results of Computational Fluid Dynamics modeling with the end results tested on a medium pressure combustion rig at the UC and a medium pressure combustion rig at GRC. The theories behind the designs, results of analysis, and experimental test data will be discussed in this report. The combustion system consists of five radially staged rows of injectors, where ten small scale injectors are used in place of a single traditional nozzle. Major accomplishments of the current work include the design of a Multipoint Lean Direct Injection (MLDI) array and associated air blast and pilot fuel injectors, which is expected to meet or exceed the goal of a 75 percent reduction in LTO NOx from CAEP6 standards. This design incorporates a reduced number of injectors over previous multipoint designs, simplified and lightweight components, and a very compact combustor section. Additional outcomes of the program are validation that the design of these combustion systems can be aided by the use of Computational Fluid Dynamics to predict and reduce emissions. Furthermore, the staging of fuel through the individually controlled radially staged injector rows successfully demonstrated improved low power operability as well as improvements in emissions over previous multipoint designs. Additional comparison between Jet- A fuel and a hydrotreated biofuel is made to determine viability of the technology for use with alternative fuels. Finally, the operability of the array and associated nozzles proved to be very stable without requiring additional active or passive control systems. A number of publications have been publish
Geometric Lagrangian approach to the physical degree of freedom count in field theory
NASA Astrophysics Data System (ADS)
Díaz, Bogar; Montesinos, Merced
2018-05-01
To circumvent some technical difficulties faced by the geometric Lagrangian approach to the physical degree of freedom count presented in the work of Díaz, Higuita, and Montesinos [J. Math. Phys. 55, 122901 (2014)] that prevent its direct implementation to field theory, in this paper, we slightly modify the geometric Lagrangian approach in such a way that its resulting version works perfectly for field theory (and for particle systems, of course). As in previous work, the current approach also allows us to directly get the Lagrangian constraints, a new Lagrangian formula for the counting of the number of physical degrees of freedom, the gauge transformations, and the number of first- and second-class constraints for any action principle based on a Lagrangian depending on the fields and their first derivatives without performing any Dirac's canonical analysis. An advantage of this approach over the previous work is that it also allows us to handle the reducibility of the constraints and to get the off-shell gauge transformations. The theoretical framework is illustrated in 3-dimensional generalized general relativity (Palatini and Witten's exotic actions), Chern-Simons theory, 4-dimensional BF theory, and 4-dimensional general relativity given by Palatini's action with a cosmological constant.
Theory, Image Simulation, and Data Analysis of Chemical Release Experiments
NASA Technical Reports Server (NTRS)
Wescott, Eugene M.
1994-01-01
The final phase of Grant NAG6-1 involved analysis of physics of chemical releases in the upper atmosphere and analysis of data obtained on previous NASA sponsored chemical release rocket experiments. Several lines of investigation of past chemical release experiments and computer simulations have been proceeding in parallel. This report summarizes the work performed and the resulting publications. The following topics are addressed: analysis of the 1987 Greenland rocket experiments; calculation of emission rates for barium, strontium, and calcium; the CRIT 1 and 2 experiments (Collisional Ionization Cross Section experiments); image calibration using background stars; rapid ray motions in ionospheric plasma clouds; and the NOONCUSP rocket experiments.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cavagnaro, D.
1979-12-01
These citations of federally-funded research are divided into two parts; namely, a chemical analysis of archaeological specimens, and general studies. The chemical analysis section deals primarily with activation analysis. Articles examined include metals, pottery, coins, paintings, soils, glass, and paper from Medieval, Grecian, Egyptian, Mayan, and prehistoric times. The general studies section cites other archaeological research, including results of excavation from the United States. Also covered is work on preservation of artifacts and remote sensing for the site location. (This updated bibliography contains 237 abstracts, 149 of which are new entries to the previous edition.)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1981-01-01
These citations of federally-funded research contains the chemical analysis of archaeological specimens, as well as general studies. The chemical analysis deals primarily with activation analysis. Articles examined include metals, pottery, coins, paintings, soils, glass, and paper from Medieval, Grecian, Egyptian, Mayan, and prehistoric times. The general studies cites other archaeological research, including results of excavation from the United States. Also covered is work on preservation of artifacts and remote sensing for the site location. (This updated bibliography contains 133 citations, all of which are new entries to the previous edition.)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cavagnaro, D.
1979-12-01
The cited reports of Federally-funded research are divided into two parts: namely, a chemical analysis of archaeological specimens, and general studies. The chemical analysis section deals primarily with activation analysis. Artifacts examined include metals, pottery, coins, paintings, soils, glass, and paper from Medieval, Grecian, Egyptian, Mayan, and prehistoric times. The general studies section discusses other archaeological research, including results of excavation from the United States. Also covered is work on preservation of artifacts and remote sensing for the site location. (This updated bibliography contains 128 abstracts, none of which are new entries to the previous edition.)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cavagnaro, D.M.
1978-11-01
These citations of Federally-funded research are divided into two parts; namely, a chemical analysis of archaeological specimens, and general studies. The chemical analysis section deals primarily with activation analysis. Articles examined include metals, pottery, coins, paintings, soils, glass, and paper from Medieval, Grecian, Egyptian, Mayan and prehistoric times. The general studies section cites other archaeological research, including results of excavation from the United States. Also covered is work on preservation of artifacts and remote sensing for the site location. (This updated bibliography contains 209 abstracts, 141 of which are new entries to the previous edition.)
Chen, Chenglong; Ni, Jiangqun; Shen, Zhaoyi; Shi, Yun Qing
2017-06-01
Geometric transformations, such as resizing and rotation, are almost always needed when two or more images are spliced together to create convincing image forgeries. In recent years, researchers have developed many digital forensic techniques to identify these operations. Most previous works in this area focus on the analysis of images that have undergone single geometric transformations, e.g., resizing or rotation. In several recent works, researchers have addressed yet another practical and realistic situation: successive geometric transformations, e.g., repeated resizing, resizing-rotation, rotation-resizing, and repeated rotation. We will also concentrate on this topic in this paper. Specifically, we present an in-depth analysis in the frequency domain of the second-order statistics of the geometrically transformed images. We give an exact formulation of how the parameters of the first and second geometric transformations influence the appearance of periodic artifacts. The expected positions of characteristic resampling peaks are analytically derived. The theory developed here helps to address the gap left by previous works on this topic and is useful for image security and authentication, in particular, the forensics of geometric transformations in digital images. As an application of the developed theory, we present an effective method that allows one to distinguish between the aforementioned four different processing chains. The proposed method can further estimate all the geometric transformation parameters. This may provide useful clues for image forgery detection.
NASA Astrophysics Data System (ADS)
Wallace, William; Miller, Jared; Diallo, Ahmed
2015-11-01
MultiPoint Thomson Scattering (MPTS) is an established, accurate method of finding the temperature, density, and pressure of a magnetically confined plasma. Two Nd:YAG (1064 nm) lasers are fired into the plasma with a effective frequency of 60 Hz, and the light is Doppler shifted by Thomson scattering. Polychromators on the NSTX-U midplane collect the scattered photons at various radii/scattering angles, and the avalanche photodiode voltages are saved to an MDSplus tree for later analysis. IDL code is then used to determine plasma temperature, pressure, and density from the captured polychromator measurements via Selden formulas. [1] Previous work [2] converted the single-processor IDL code into Python code, and prepared a new architecture for multiprocessing MPTS in parallel. However, that work was not completed to the generation of output data and curve fits that match with the previous IDL. This project refactored the Python code into a object-oriented architecture, and created a software test suite for the new architecture which allowed identification of the code which generated the difference in output. Another effort currently underway is to display the Thomson data in an intuitive, interactive format. This work was supported in part by the U.S. Department of Energy, Office of Science, Office of Workforce Development for Teachers and Scientists (WDTS) under the Community College Internship (CCI) program.
Self-consistent analysis of high drift velocity measurements with the STARE system
NASA Technical Reports Server (NTRS)
Reinleitner, L. A.; Nielsen, E.
1985-01-01
The use of the STARE and SABRE coherent radar systems as valuable tools for geophysical research has been enhanced by a new technique called the Superimposed-Grid-Point method. This method permits an analysis of E-layer plasma irregularity phase velocity versus flow angle utilizing only STARE or SABRE data. As previous work with STARE has indicated, this analysis has clearly shown that the cosine law assumption breaks down for velocities near and exceeding the local ion acoustic velocities. Use of this method is improving understanding of naturally-occurring plasma irregularities in the E-layer.
White, Sara C
2013-02-04
A cross-sectional study to investigate musculoskeletal discomfort (MSD) surveyed 219 veterinarians who currently or previously perform spays and neuters at least 4 hours per week. Participants were asked about the presence and severity of hand and body MSD during the previous month, whether MSD interfered with work or daily activities, whether they attributed their MSD to their spay/neuter work, and whether MSD had ever necessitated absence from work. The period prevalence of MSD was 99.1%, with 76.7% experiencing hand or wrist pain and 98.2% experiencing body pain. Hand discomfort was most commonly reported in the right thumb and/or thumb base (49.8%) and the right wrist (37.9%). Body discomfort was most commonly reported in the lower back (76.7%), shoulders (72.6%), and neck (71.7%). Increasing career length, increasing weekly hours in surgery and decreasing job satisfaction were the work-related factors with the greatest relative contribution accounting for variation in hand pain severity and total pain. Although 94.4% of respondents felt that posture during surgery is important, only 30.6% had received any instruction in posture and positioning for surgery. Future interventions should aim to optimize surgical efficiency, surgeon work schedules, and working environment. Analysis and intervention studies are required to determine further causes of MSD in these veterinarians and develop interventions to prevent MSD.
Determinants of Chronic Respiratory Symptoms among Pharmaceutical Factory Workers
Enquselassie, Fikre; Tefera, Yifokire; Gizaw, Muluken; Wakuma, Samson; Woldemariam, Messay
2018-01-01
Background Chronic respiratory symptoms including chronic cough, chronic phlegm, wheezing, shortness of breath, and chest pain are manifestations of respiratory problems which are mainly evolved as a result of occupational exposures. This study aims to assess determinants of chronic respiratory symptoms among pharmaceutical factory workers. Methods A case control study was carried out among 453 pharmaceutical factory workers with 151 cases and 302 controls. Data was collected using pretested and structured questionnaire. The data was analyzed using descriptive statistics and bivariate and multivariate analysis. Result Previous history of chronic respiratory diseases (AOR = 3.36, 95% CI = 1.85–6.12), family history of chronic respiratory diseases (AOR = 2.55, 95% CI = 1.51–4.32), previous dusty working environment (AOR = 2.26, 95% CI = 1.07–4.78), ever smoking (AOR = 3.66, 95% CI = 1.05–12.72), and service years (AOR = 1.86, 95% CI = 1.16–2.99) showed statistically significant association with chronic respiratory symptoms. Conclusion Previous history of respiratory diseases, family history of chronic respiratory diseases, previous dusty working environment, smoking, and service years were determinants of chronic respiratory symptoms. Public health endeavors to prevent the burden of chronic respiratory symptoms among pharmaceutical factory workers should target the reduction of adverse workplace exposures and discouragement of smoking. PMID:29666655
A landscape inventory framework: scenic analyses of the Northern Great Plains
Litton R. Burton Jr.; Robert J. Tetlow
1978-01-01
A set of four visual inventories are proposed. They are designed to document scenic resources for varied scales of application, from regional and general to local and specific. The Northern Great Plains is used as a case study. Scenic analysis and identification of criteria extend earlier work. The inventory is based on (1) study of previously developed landscape...
ERIC Educational Resources Information Center
Martins, Jose Alexandre; Nascimento, Maria Manuel; Estrada, Assumpta
2012-01-01
Teachers' attitudes towards statistics can have a significant effect on their own statistical training, their teaching of statistics, and the future attitudes of their students. The influence of attitudes in teaching statistics in different contexts was previously studied in the work of Estrada et al. (2004, 2010a, 2010b) and Martins et al.…
The Inhibitation of Pb(IV) Oxide Formation in Chlorinated Water by Orthophosphate
Previous work showed that PbO2 can form in water in the absence of phosphate. The analysis of many pipe scales and deposits removed from real DWDS has shown that PbO2 is present in some cases and absent in others. High ORP has been shown to favor PbO
Possible mechanism for anthraquinone species diffusion in alkaline pulping
X.-S. Chai; J. Samp; Q.X. Hou; S.-H Yoon; J.Y. Zhu
2007-01-01
An analysis of the effectiveness of anthraquinone (AQ) in kraft-AQ pulping in terms of its mechanism of transport has been conducted. Our previous work showed that caustic solutions of wood lignin can decrease the membrane exclusion for anthraquinones, i.e., the presence of wood lignin enhances the ability of AQ to pass through a membrane when a reducing agent is...
A Latent Variable Approach to Determining the Structure of Executive Function in Preschool Children
ERIC Educational Resources Information Center
Miller, Michael R.; Giesbrecht, Gerald F.; Muller, Ulrich; McInerney, Robert J.; Kerns, Kimberly A.
2012-01-01
The composition of executive function (EF) in preschool children was examined using confirmatory factor analysis (CFA). A sample of 129 children between 3 and 5 years of age completed a battery of EF tasks. Using performance indicators of working memory and inhibition similar to previous CFA studies with preschoolers, we replicated a unitary EF…
Novel Magnetic Fluids for Breast Cancer Therapy
2005-04-01
synthesis and characterization efforts concerning nickel-based alloys have been reported previously [5]. Nano-material has been obtained using an inverse...gar gel d ork his task regularly accompanies the synthesis work. Characterization analysis includes size, composition, magnetic pro perties. The...currently available magnetic fluids used in hyperthermia. The specific goals are: 1. Develop a synthesis process to fabricate magnetic nano
Study of the $$\\beta $$ Decay of Fission Products with the DTAS Detector
Guadilla, V.; Algora, A.; Tain, J. L.; ...
2017-01-01
Total Absorption Spectroscopy measurements of the β decay of 103Mo and 103Tc, important contributors to the decay heat summation calculation in reactors, are reported in this work. Furthermore, the analysis of the experiment, performed at IGISOL with the new DTAS detector, show new β intensity that was not detected in previous measurements with Ge detectors.
Sound Radiated by a Wave-Like Structure in a Compressible Jet
NASA Technical Reports Server (NTRS)
Golubev, V. V.; Prieto, A. F.; Mankbadi, R. R.; Dahl, M. D.; Hixon, R.
2003-01-01
This paper extends the analysis of acoustic radiation from the source model representing spatially-growing instability waves in a round jet at high speeds. Compared to previous work, a modified approach to the sound source modeling is examined that employs a set of solutions to linearized Euler equations. The sound radiation is then calculated using an integral surface method.
USDA-ARS?s Scientific Manuscript database
In previous work, we reported on the isolation and genome sequence analysis of Bacillus cereus strain tsu1 NCBI accession number JPYN00000000. The 36 scaffolds in the assembled tsu1 genome were all aligned with B. cereus B4264 genome with variations. Genes encoding for xylanase and cellulase and the...
Characterisation of semi-insulating GaAs
NASA Technical Reports Server (NTRS)
Walukiewicz, W.; Pawlowicz, L.; Lagowski, J.; Gatos, H. C.
1982-01-01
Hole and electron mobilities as functions of temperature and ionised impurity concentration are calculated for GaAs. It is shown that these calculations, when used to analyse electrical properties of semi-insulating GaAs, enable an assessment of the Fermi energy position and ionised impurity concentration to be made. In contrast to previous work, the analysis does not require any phenomenological assumptions.
Francis A. Roesch; Paul C. van Deusen; Zhiliang Zhu
1995-01-01
Various methods of adjusting low-cost and possibly biased estimates of percent forest coverage from AVHRR data with a subsample of higher-cost estimates from the USDA Forest Service's Forest Inventory and Analysis plots were investigated. Two ratio and two regression estimators were evaluated. Previous work (Zhu and Teuber, 1991) finding that the estimates from...
Non-invasive prenatal diagnosis using cell-free fetal DNA technology: applications and implications.
Hall, Alison; Bostanci, A; Wright, C F
2010-01-01
Cell-free fetal DNA and RNA circulating in maternal blood can be used for the early non-invasive prenatal diagnosis (NIPD) of an increasing number of genetic conditions, both for pregnancy management and to aid reproductive decision-making. Here we present a brief review of the scientific and clinical status of the technology, and an overview of key ethical, legal and social issues raised by the analysis of cell-free fetal DNA for NIPD. We suggest that the less invasive nature of the technology brings some distinctive issues into focus, such as the possibility of broader uptake of prenatal diagnosis and access to the technology directly by the consumer via the internet, which have not been emphasised in previous work in this area. We also revisit significant issues that are familiar from previous debates about prenatal testing. Since the technology seems to transect existing distinctions between screening and diagnostic tests, there are important implications for the form and process involved in obtaining informed consent or choice. This analysis forms part of the work undertaken by a multidisciplinary group of experts which made recommendations about the implementation of this technology within the UK National Health Service. Copyright 2010 S. Karger AG, Basel.
Fawcett, Richard John; Kernohan, George
2017-09-12
To discover if healthcare professionals working within an ED are able to make a diagnosis of female genital mutilation (FGM) in those patients who have previously undergone the procedure and report it as per UK law. A retrospective analysis of patients' notes who were assigned an FGM code during the period of May 2015 to August 2016. Single-centre, large UK major trauma centre offering a tertiary FGM clinic. Any woman coded during the study period as having undergone FGM. Number of FGM cases identified by the ED. Mean age, presenting complaint, discharge diagnosis, genitourinary exam and defibulation status. 34 patients were identified as having undergone FGM, 19 had previously attended ED and none had their FGM identified during their ED attendance. The age range of those identified was 23 to 40 years. None had undergone defibulation. This study demonstrates that the identification of FGM victims by an ED is very poor, and more work needs to be done to increase awareness of the subject by front-line staff. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
NASA Astrophysics Data System (ADS)
Liu, Qing; Li, Hejun; Zhang, Yulei; Zhao, Zhigang
2018-06-01
A series of theoretical analysis is carried out for the axial vapor-liquid-solid (VLS) growth of nanowires starting with a binary eutectic droplet. The growth model considering the entire process of axial VLS growth is a development of the approaches already developed by previous studies. In this model, the steady and unsteady state growth are considered both. The amount of solute species in a variable liquid droplet, the nanowire length, radius, growth rate and all other parameters during the entire axial growth process are treated as functions of growth time. The model provides theoretical predictions for the formation of nanowire shape, the length-radius and growth rate-radius dependences. It is also suggested by the model that the initial growth of single nanowire is significantly affected by Gibbs-Thompson effect due to the shape change. The model was applied on predictions of available experimental data of Si and Ge nanowires grown from Au-Si and Au-Ge systems respectively reported by other works. The calculations with the proposed model are in satisfactory agreement with the experimental results of the previous works.
Manavella, Pablo A; Dezar, Carlos A; Ariel, Federico D; Chan, Raquel L
2008-10-01
HAHB4 is a sunflower gene encoding a homeodomain-leucine zipper (HD-Zip) transcription factor. It was previously demonstrated that this gene is regulated at the transcriptional level by several abiotic factors and hormones. A previous analysis in the PLACE database revealed the presence of four putative ABREs. In this work these four elements and also one W-box and two root-specific expression elements were characterized as functional. Site-directed mutagenesis on the promoter, stable transformation of Arabidopis plants as well as transient transformation of sunflower leaves, were performed. The analysis of the transformants was carried out by histochemistry and real time RT-PCR. The results indicate that just one ABRE out of the four is responsible for ABA, NaCl and drought regulation. However, NaCl induction occurs also by an additional ABA-independent way involving another two overlapped ABREs. On the other hand, it was determined that the W-box located 5' upstream is responsive to ethylene and only two root-specific expression elements, among the several detected, are functional but redundant. Conservation of molecular mechanisms between sunflower and Arabidopsis is strongly supported by this experimental work.
Torén, Kjell; Blanc, Paul D
2009-01-01
Background The aim of this paper is to highlight emerging data on occupational attributable risk in asthma. Despite well documented outbreaks of disease and the recognition of numerous specific causal agents, occupational exposures previously had been relegated a fairly minor role relative to other causes of adult onset asthma. In recent years there has been a growing recognition of the potential importance of asthma induced by work-related exposures Methods We searched Pub Med from June 1999 through December 2007. We identified six longitudinal general population-based studies; three case-control studies and eight cross-sectional analyses from seven general population-based samples. For an integrated analysis we added ten estimates prior to 1999 included in a previous review. Results The longitudinal studies indicate that 16.3% of all adult-onset asthma is caused by occupational exposures. In an overall synthesis of all included studies the overall median PAR value was 17.6%. Conclusion Clinicians should consider the occupational history when evaluating patients in working age who have asthma. At a societal level, these findings underscore the need for further preventive action to reduce the occupational exposures to asthma-causing agents. PMID:19178702
Recognizing the Effects of Language Mode on the Cognitive Advantages of Bilingualism.
Yu, Ziying; Schwieter, John W
2018-01-01
For bilinguals, it is argued that a cognitive advantage can be linked to the constant management and need for conflict resolution that occurs when the two languages are co-activated (Bialystok, 2015). Language mode (Grosjean, 1998, 2001) is a significant variable that defines and shapes the language experiences of bilinguals and consequently, the cognitive advantages of bilingualism. Previous work, however, has not sufficiently tested the effects of language mode on the bilingual experience. In this brief conceptual analysis, we discuss the significance of language mode in bilingual work on speech perception, production, and reading. We offer possible explanations for conflicting findings and ways in which future work should control for its modulating effects.
Young, Amanda; Muhlner, Stasia; Kurowski, Alicia; Cifuentes, Manuel
2015-06-05
Rural residents with work-related fractures utilize healthcare differently and return to work (RTW) sooner than their similarly-injured urban peers. To elucidate the relationship between physical medicine and rehabilitation (PM&R) service usage and work-disability duration following work-related injury. Retrospective cohort study, employing a two-phase sequential analysis. The project involved a longitudinal analysis of PM&R utilization and work-disability duration of 2,216 people across the U.S. who fractured a bone, received PM&R services, and had at least seven days off work. In the first phase of the analysis each individual was assigned a PM&R utilization score based on how similar his or her usage was to that typical of rural residents. The second phase tested the relationship between assigned PM&R utilization scores and work-disability duration. Differences in urban versus rural PM&R utilization included less total PM&R services and fewer passive services in the first 8 weeks for rural claimants. Among those off work for more than a month, rural residents used more active services just prior to RTW, with a gradual decreasing of services leading up to RTW. Controlling for covariates, aggregate PM&R utilization scores were found to relate to time to first RTW (Hazard Ratio=1.66, p<0.005). Findings suggest that using services in a way that is more consistent with rural patterns is associated with decreased work-disability durations. Consistent with previous studies, results suggest that passive services, prolonged episodes of care, and failure to focus on transitioning to self-management are related to longer work-disability durations.
Laurent, J; Bragard, I; Coucke, P; Hansez, I
2015-05-01
This national survey aims, on the one hand, to perform a comparative analysis of working conditions, job strain and burnout of Belgian nurses, physicists and radiation oncologists working in radiotherapy and, on the other hand, to explore the role of emotional labor in the development of stress and burnout. We used the Working Conditions and Control Questionnaire, the Positive and Negative Occupational States Inventory, the Maslach Burnout Inventory, the negative work-home interaction subscale of the Survey Work-Home Interaction Nijmegen (NEGWHI), Perceived Organizational Support Scale and Emotional Labor Scale. One open question asked about problematic job situations. Ninety-eight nurses and physicists participated (33 % response rate), in addition to 66 radiation oncologists from a previous study. Although global scores of working conditions, job strain and burnout corresponded to normal scores, comparative analysis identified physicists as focus group concerning job strain and burnout. Moreover, nurses and physicists surface acting was a good predictor of job strain (β=0.22, P=0.01), emotional exhaustion (β=0.32, P<0.001) and depersonalization (β=0.43, P<0.001). Nevertheless, perceived organizational support was a moderator in this relation. Radiotherapy employees were in the norms. The importance of organizational support was demonstrated to avoid potential health problems, for workers experiencing high levels of emotional demands. Copyright © 2015 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.
Biased Target Ion Beam Deposition and Nanoskiving for Fabricating NiTi Alloy Nanowires
NASA Astrophysics Data System (ADS)
Hou, Huilong; Horn, Mark W.; Hamilton, Reginald F.
2016-12-01
Nanoskiving is a novel nanofabrication technique to produce shape memory alloy nanowires. Our previous work was the first to successfully fabricate NiTi alloy nanowires using the top-down approach, which leverages thin film technology and ultramicrotomy for ultra-thin sectioning. For this work, we utilized biased target ion beam deposition technology to fabricate nanoscale (i.e., sub-micrometer) NiTi alloy thin films. In contrast to our previous work, rapid thermal annealing was employed for heat treatment, and the B2 austenite to R-phase martensitic transformation was confirmed using stress-temperature and diffraction measurements. The ultramicrotome was programmable and facilitated sectioning the films to produce nanowires with thickness-to-width ratios ranging from 4:1 to 16:1. Energy dispersive X-ray spectroscopy analysis confirmed the elemental Ni and Ti make-up of the wires. The findings exposed the nanowires exhibited a natural ribbon-like curvature, which depended on the thickness-to-width ratio. The results demonstrate nanoskiving is a potential nanofabrication technique for producing NiTi alloy nanowires that are continuous with an unprecedented length on the order of hundreds of micrometers.
NASA Astrophysics Data System (ADS)
Cederman, Daniel; Hellstrom, Daniel
2016-08-01
The VxWorks operating system together with the Cobham Grislier LEON architectural port provides an efficient platform for the development of software for space applications. It supports both uni-and multiprocessor mode (SMP or AMP) and comes with an integrated development environment with several debugging and analysis tools. The LEON architectural port from Cobham Grislier supports LEON2/3/4 systems and includes drivers for all standard on-chip peripherals, as well as support for RASTA boards. In this paper we will highlight some the many features of VxWorks and the LEON architectural port. The latest version of the architectural port now supports VxWorks 6.9 (the previous version was for VxWorks 6.7) and has the support for the GR740, the commercially available quad-core LEON system, designed as the European Space Agency's Next Generation Microprocessor (NGMP).
Smith, Peter M; Ibrahim-Dost, Jihan; Keegel, Tessa; MacFarlane, Ewan
2013-08-01
To examine the relationship between shiftwork and work injury among men and women, taking into account the presence of dependent children. An analysis of respondents to the 2009-2010 Multipurpose Household Survey (n = 6927 women and 7340 men). Logistic regression models examined the work injury risk, adjusting for various covariates. The risk of work injury associated with shiftwork was higher for women than for men. Nevertheless, gender differences were present only among respondents with dependent children. Shiftworking women with children also had a greater risk of work injury than shiftworking women without children. This previously noted elevated risk of injury associated with shiftwork among women compared with that in men may be a product of increased household responsibilities or other factors particular to female shiftworkers with dependent children.
Scalability of Several Asynchronous Many-Task Models for In Situ Statistical Analysis.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pebay, Philippe Pierre; Bennett, Janine Camille; Kolla, Hemanth
This report is a sequel to [PB16], in which we provided a first progress report on research and development towards a scalable, asynchronous many-task, in situ statistical analysis engine using the Legion runtime system. This earlier work included a prototype implementation of a proposed solution, using a proxy mini-application as a surrogate for a full-scale scientific simulation code. The first scalability studies were conducted with the above on modestly-sized experimental clusters. In contrast, in the current work we have integrated our in situ analysis engines with a full-size scientific application (S3D, using the Legion-SPMD model), and have conducted nu- mericalmore » tests on the largest computational platform currently available for DOE science ap- plications. We also provide details regarding the design and development of a light-weight asynchronous collectives library. We describe how this library is utilized within our SPMD- Legion S3D workflow, and compare the data aggregation technique deployed herein to the approach taken within our previous work.« less
Empirical research on the influencing factors of the occupational stress for construction workers
NASA Astrophysics Data System (ADS)
LV, Xing; WU, Xiang; CI, Huipeng; LIU, Qing; YAO, Yongzheng
2017-04-01
Employee’s occupational stress and safety performance are highly related, which has been generally recognized by the researchers. We did this research to understand the status of the stress for construction workers, and explore the influence factors of pressure source with characteristics of construction industry. Based on the results of previous studies, we designed questionnaire to collect the influence factors on occupational stressors. The study selected workers from certain construction units at the grass-roots level as sample source. According to the results of the questionnaire, we redesigned the interview outline, and did the semi-structured interviews on workers randomly selected. Finally, we developed a scale which combined the characteristics of construction projects in China. Using SPSS software for factor analysis, reliability analysis, and descriptive statistical analysis, the results show that there are six factors affecting the workers’ occupational stress, including The Work Itself, Family-Work, Career Development, Organization Style, Interpersonal Relationship and Role Management Style. The work itself is the main sources of occupational stress. The results can be used by the construction company to provide guidance for workers to control and manage occupational stress.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kleese van Dam, Kerstin; Lansing, Carina S.; Elsethagen, Todd O.
2014-01-28
Modern workflow systems enable scientists to run ensemble simulations at unprecedented scales and levels of complexity, allowing them to study system sizes previously impossible to achieve, due to the inherent resource requirements needed for the modeling work. However as a result of these new capabilities the science teams suddenly also face unprecedented data volumes that they are unable to analyze with their existing tools and methodologies in a timely fashion. In this paper we will describe the ongoing development work to create an integrated data intensive scientific workflow and analysis environment that offers researchers the ability to easily create andmore » execute complex simulation studies and provides them with different scalable methods to analyze the resulting data volumes. The integration of simulation and analysis environments is hereby not only a question of ease of use, but supports fundamental functions in the correlated analysis of simulation input, execution details and derived results for multi-variant, complex studies. To this end the team extended and integrated the existing capabilities of the Velo data management and analysis infrastructure, the MeDICi data intensive workflow system and RHIPE the R for Hadoop version of the well-known statistics package, as well as developing a new visual analytics interface for the result exploitation by multi-domain users. The capabilities of the new environment are demonstrated on a use case that focusses on the Pacific Northwest National Laboratory (PNNL) building energy team, showing how they were able to take their previously local scale simulations to a nationwide level by utilizing data intensive computing techniques not only for their modeling work, but also for the subsequent analysis of their modeling results. As part of the PNNL research initiative PRIMA (Platform for Regional Integrated Modeling and Analysis) the team performed an initial 3 year study of building energy demands for the US Eastern Interconnect domain, which they are now planning to extend to predict the demand for the complete century. The initial study raised their data demands from a few GBs to 400GB for the 3year study and expected tens of TBs for the full century.« less
Probing sub-GeV dark matter-baryon scattering with cosmological observables
NASA Astrophysics Data System (ADS)
Xu, Weishuang Linda; Dvorkin, Cora; Chael, Andrew
2018-05-01
We derive new limits on the elastic scattering cross section between baryons and dark matter using cosmic microwave background data from the Planck satellite and measurements of the Lyman-alpha forest flux power spectrum from the Sloan Digital Sky Survey. Our analysis addresses generic cross sections of the form σ ∝vn , where v is the dark matter-baryon relative velocity, allowing for constraints on the cross section independent of specific particle physics models. We include high-ℓ polarization data from Planck in our analysis, improving over previous constraints. We apply a more careful treatment of dark matter thermal evolution than previously done, allowing us to extend our constraints down to dark matter masses of ˜MeV . We show in this work that cosmological probes are complementary to current direct detection and astrophysical searches.
Hypercube matrix computation task
NASA Technical Reports Server (NTRS)
Calalo, Ruel H.; Imbriale, William A.; Jacobi, Nathan; Liewer, Paulett C.; Lockhart, Thomas G.; Lyzenga, Gregory A.; Lyons, James R.; Manshadi, Farzin; Patterson, Jean E.
1988-01-01
A major objective of the Hypercube Matrix Computation effort at the Jet Propulsion Laboratory (JPL) is to investigate the applicability of a parallel computing architecture to the solution of large-scale electromagnetic scattering problems. Three scattering analysis codes are being implemented and assessed on a JPL/California Institute of Technology (Caltech) Mark 3 Hypercube. The codes, which utilize different underlying algorithms, give a means of evaluating the general applicability of this parallel architecture. The three analysis codes being implemented are a frequency domain method of moments code, a time domain finite difference code, and a frequency domain finite elements code. These analysis capabilities are being integrated into an electromagnetics interactive analysis workstation which can serve as a design tool for the construction of antennas and other radiating or scattering structures. The first two years of work on the Hypercube Matrix Computation effort is summarized. It includes both new developments and results as well as work previously reported in the Hypercube Matrix Computation Task: Final Report for 1986 to 1987 (JPL Publication 87-18).
Hossain, Mohammad B; Li, Huiqi; Hedmer, Maria; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin
2015-01-01
Background Welders are at risk for cardiovascular disease. Recent studies linked tobacco smoke exposure to hypomethylation of the F2RL3 (coagulation factor II (thrombin) receptor-like 3) gene, a marker for cardiovascular disease prognosis and mortality. However, whether welding fumes cause hypomethylation of F2RL3 remains unknown. Methods We investigated 101 welders (median span of working as a welder: 7 years) and 127 unexposed controls (non-welders with no obvious exposure to respirable dust at work), age range 23–60 years, all currently non-smoking, in Sweden. The participants were interviewed about their work history, lifestyle factors and diseases. Personal sampling of respirable dust was performed for the welders. DNA methylation of F2RL3 in blood was assessed by pyrosequencing of four CpG sites, CpG_2 (corresponds to cg03636183) to CpG_5, in F2RL3. Multivariable linear regression analysis was used to assess the association between exposure to welding fumes and F2RL3 methylation. Results Welders had 2.6% lower methylation of CpG_5 than controls (p<0.001). Higher concentrations of measured respirable dust among the welders were associated with hypomethylation of CpG_2, CpG_4 and CpG_5 (β=−0.49 to −1.4, p<0.012); p<0.029 adjusted for age, previous smoking, passive smoking, education, current residence and respirator use. Increasing the number of years working as a welder was associated with hypomethylation of CpG_4 (linear regression analysis, β=−0.11, p=0.039, adjusted for previous smoking). Previous tobacco smokers had 1.5–4.7% (p<0.014) lower methylation of 3 of the 4 CpG sites in F2RL3 (CpG_2, CpG_4 and CpG_5) compared to never-smokers. A non-significant lower risk of cardiovascular disease with more methylation was observed for all CpG sites. Conclusions Welding fumes exposure and previous smoking were associated with F2RL3 hypomethylation. This finding links low-to-moderate exposure to welding fumes to adverse effects on the cardiovascular system, and suggests a potential mechanistic pathway for this link, via epigenetic effects on F2RL3 expression. PMID:26395445
NASA Astrophysics Data System (ADS)
Corda, Christian
2013-12-01
Introducing a black hole (BH) effective temperature, which takes into account both the non-strictly thermal character of Hawking radiation and the countable behavior of emissions of subsequent Hawking quanta, we recently re-analysed BH quasi-normal modes (QNMs) and interpreted them naturally in terms of quantum levels. In this work we improve such an analysis removing some approximations that have been implicitly used in our previous works and obtaining the corrected expressions for the formulas of the horizon's area quantization and the number of quanta of area and hence also for Bekenstein-Hawking entropy, its subleading corrections and the number of micro-states, i.e. quantities which are fundamental to realize the underlying quantum gravity theory, like functions of the QNMs quantum "overtone" number n and, in turn, of the BH quantum excited level. An approximation concerning the maximum value of n is also corrected. On the other hand, our previous results were strictly corrected only for scalar and gravitational perturbations. Here we show that the discussion holds also for vector perturbations. The analysis is totally consistent with the general conviction that BHs result in highly excited states representing both the "hydrogen atom" and the "quasi-thermal emission" in quantum gravity. Our BH model is somewhat similar to the semi-classical Bohr's model of the structure of a hydrogen atom. The thermal approximation of previous results in the literature is consistent with the results in this paper. In principle, such results could also have important implications for the BH information paradox.
Gibbs, Simon; Powell, Ben
2012-12-01
Previous work has yielded knowledge of teachers' attributions for children's behaviour. Other studies have helped to develop understanding of teachers' efficacy beliefs. Little work has been undertaken to examine teachers' efficacy beliefs with regard to classroom behaviour. This study aimed to investigate the relationship between teachers' individual and collective beliefs about their efficacy with children's behaviour and whether these beliefs were associated with the use of exclusion as a sanction. A total of 197 teachers from 31 primary and nursery schools in the North East of England participated. Participants responded to questionnaires to assess their individual and collective efficacy beliefs. Demographic and school level data were also collected. Factor analysis indicated that teachers' individual efficacy beliefs were best represented by three factors: 'Classroom Management', 'Children's Engagement', 'Instructional Strategies' that corresponded well to previous findings. Analysis of collective efficacy beliefs showed a similar structure that differed from previous findings. Individual efficacy was not associated with numbers of children excluded. One factor 'Addressing External Influences' in the collective beliefs was negatively correlated with numbers of children excluded and appeared to mitigate the deleterious effects associated with socio-economic deprivation. This study adds weight to the importance of understanding and supporting teachers' beliefs in their collective efficacy. In particular, this study underlines the need for strategies that will endorse and develop teachers' beliefs in their ability to manage children's behaviour successfully. ©2011 The British Psychological Society.
Age-related differences in working hours among male and female GPs: an SMS-based time use study.
van Hassel, Daniël; van der Velden, Lud; de Bakker, Dinny; Batenburg, Ronald
2017-12-19
In several countries, the number of hours worked by general practitioners (GPs) has decreased, raising concern about current and impending workforce shortages. This shorter working week has been ascribed both to the feminisation of the workforce and to a younger generation of GPs who prefer more flexible working arrangements. There is, however, limited insight into how the impact of these determinants interact. We investigated the relative importance of differences in GPs' working hours in relation to gender, age, and employment position. An analysis was performed on real-time monitoring data collected by sending SMS text messages to 1051 Dutch GPs, who participated during a 1-week time use study. We used descriptive statistics, independent sample t-tests, and one-way ANOVA analysis to compare the working time of different GP groups. A path analysis was conducted to examine the difference in working time by gender, age, employment position, and their combinations. Female GPs worked significantly fewer hours than their male peers. GPs in their 50s worked the highest number of hours, followed by GPs age 60 and older. GPs younger than 40 worked the lowest number of hours. This relationship between working hours and age was not significantly different for women and men. As shown by path analysis, female GPs consistently worked fewer hours than their male counterparts, regardless of their age and employment position. The relationship between age and working hours was largely influenced by gender and employment position. The variation in working hours among GPs can be explained by the combination of gender, age, and employment position. Gender appears to be the most important predictor as the largest part of the variation in working hours is explained by a direct effect of this variable. It has previously been reported that the difference in working hours between male and female GPs had decreased over time. However, our findings suggest that gender remains a critical factor for variation in time use and for policy instruments such as health workforce planning.
NASA Astrophysics Data System (ADS)
Loveday, S.; Harris, D. B.; Schiappa, T.; Pecha, M.
2017-12-01
The specific sources of sediments deposited in the Appalachian basin prior to and immediately following the Alleghenian orogeny has long been a topic of debate. Recent advances in U-Pb dating of detrital zircons have greatly helped to determine some of the sources of these sediments. For this study, sandstone samples were collected from the Pottsville Formation in the northern Appalachian Foreland Basin, Venango County, Pennsylvania to provide supplementary data for previous work that sought to describe the provenance of the same sediments by point counts of thin sections of the same units. Results of this previous work established that the provenance for these units was transitional recycled orogenic, including multiple recycled sediments, and that a cratonic contribution was not able to be determined clearly. The previous results suggested that the paleoenvironment was a fluvial dominated delta prograding in the northern direction. However, no geochronologic data was found during this study to confirm this interpretation. We sought to verify these results by U-Pb analysis of detrital zircons. Samples were collected from the areas where the previous research took place. U-Pb ages were found from sample at the highest elevation and lowest elevation. In the first sample, sample 17SL01 (younger sample stratigraphically), the zircons yield U-Pb age range peaks at 442-468 ma and 1037-1081 ma. The probability density plot for this specific sample displays a complete age gap from 500 ma to 811 ma. In the second sample, sample 17SL03 (older rock stratigraphically), the zircons yield U-Pb ages range peaks of 424-616 ma and 975-1057 ma. This sample doesn't show any ages younger than 424 ma and it doesn't display the sample age gap as sample 17SL01 does. The ages of zircons are consistent with thin section point counting provenance results from previous research suggesting zircon transport from the northern direction.
Gil, Modesta Inmaculada; Benrimoj, Shalom Isaac; Martínez-Martínez, Fernando; Cardero, Manuel; Gastelurrutia, Miguel Ángel
2013-01-01
to prioritize previously identified in Spain facilitators for the implementation of new Pharmaceutical Services that allow designing strategies for the implementation of Medication Review with follow-up (MRFup) service. Exploratory factor analysis (EFA). A draft of a questionnaire was performed based on a previous literature review and following the RAND/UCLA methodology. An expert panel worked with it and generated a definitive questionnaire which, after piloting, was used with a representative sample of pharmacists, owners or staff members, who were working in community pharmacy, using computer-assisted telephone interviewing (CATI) methodology. To understand underlying constructs in the questionnaire an EFA was performed. Different approaches were tested such as principal components factor analysis and principal axis factoring method. The best interpretability was achieved using the Factorization of Principal axis method with Direct Oblimin rotation, which explained the 40.0% of total variance. This produced four factors defined as: «Incentives», «External campaigns», «Expert in MRFup» and «Professionalism of the pharmacist». It can be stated that for implementation and sustainability of MRFup Service it is necessary being paid; also it must be explained to health professional and society in general. Practice of MRFup service demands pharmacists receiving a more clinical education and assuming more responsibilities as health professionals. Copyright © 2012 Elsevier España, S.L. All rights reserved.
Measurement of fracture properties of concrete at high strain rates
Cendón, D. A.; Sánchez-Gálvez, V.; Gálvez, F.
2017-01-01
An analysis of the spalling technique of concrete bars using the modified Hopkinson bar was carried out. A new experimental configuration is proposed adding some variations to previous works. An increased length for concrete specimens was chosen and finite-element analysis was used for designing a conic projectile to obtain a suitable triangular impulse wave. The aim of this initial work is to establish an experimental framework which allows a simple and direct analysis of concrete subjected to high strain rates. The efforts and configuration of these primary tests, as well as the selected geometry and dimensions for the different elements, have been focused to achieve a simple way of identifying the fracture position and so the tensile strength of tested specimens. This dynamic tensile strength can be easily compared with previous values published in literature giving an idea of the accuracy of the method and technique proposed and the possibility to extend it in a near future to obtain other mechanical properties such as the fracture energy. The tests were instrumented with strain gauges, accelerometers and high-speed camera in order to validate the results by different ways. Results of the dynamic tensile strength of the tested concrete are presented. This article is part of the themed issue ‘Experimental testing and modelling of brittle materials at high strain rates’. PMID:27956510
NASA Astrophysics Data System (ADS)
Aab, A.; Abreu, P.; Aglietta, M.; Samarai, I. Al; Albuquerque, I. F. M.; Allekotte, I.; Almela, A.; Alvarez Castillo, J.; Alvarez-Muñiz, J.; Anastasi, G. A.; Anchordoqui, L.; Andrada, B.; Andringa, S.; Aramo, C.; Arqueros, F.; Arsene, N.; Asorey, H.; Assis, P.; Aublin, J.; Avila, G.; Badescu, A. M.; Balaceanu, A.; Barreira Luz, R. J.; Baus, C.; Beatty, J. J.; Becker, K. H.; Bellido, J. A.; Berat, C.; Bertaina, M. E.; Bertou, X.; Biermann, P. L.; Billoir, P.; Biteau, J.; Blaess, S. G.; Blanco, A.; Blazek, J.; Bleve, C.; Boháčová, M.; Boncioli, D.; Bonifazi, C.; Borodai, N.; Botti, A. M.; Brack, J.; Brancus, I.; Bretz, T.; Bridgeman, A.; Briechle, F. L.; Buchholz, P.; Bueno, A.; Buitink, S.; Buscemi, M.; Caballero-Mora, K. S.; Caccianiga, L.; Cancio, A.; Canfora, F.; Caramete, L.; Caruso, R.; Castellina, A.; Cataldi, G.; Cazon, L.; Chavez, A. G.; Chinellato, J. A.; Chudoba, J.; Clay, R. W.; Colalillo, R.; Coleman, A.; Collica, L.; Coluccia, M. R.; Conceição, R.; Contreras, F.; Cooper, M. J.; Coutu, S.; Covault, C. E.; Cronin, J.; D'Amico, S.; Daniel, B.; Dasso, S.; Daumiller, K.; Dawson, B. R.; de Almeida, R. M.; de Jong, S. J.; De Mauro, G.; de Mello Neto, J. R. T.; De Mitri, I.; de Oliveira, J.; de Souza, V.; Debatin, J.; Deligny, O.; Di Giulio, C.; Di Matteo, A.; Díaz Castro, M. L.; Diogo, F.; Dobrigkeit, C.; D'Olivo, J. C.; dos Anjos, R. C.; Dova, M. T.; Dundovic, A.; Ebr, J.; Engel, R.; Erdmann, M.; Erfani, M.; Escobar, C. O.; Espadanal, J.; Etchegoyen, A.; Falcke, H.; Farrar, G.; Fauth, A. C.; Fazzini, N.; Fick, B.; Figueira, J. M.; Filipčič, A.; Fratu, O.; Freire, M. M.; Fujii, T.; Fuster, A.; Gaior, R.; García, B.; Garcia-Pinto, D.; Gaté, F.; Gemmeke, H.; Gherghel-Lascu, A.; Ghia, P. L.; Giaccari, U.; Giammarchi, M.; Giller, M.; Głas, D.; Glaser, C.; Golup, G.; Gómez Berisso, M.; Gómez Vitale, P. F.; González, N.; Gorgi, A.; Gorham, P.; Gouffon, P.; Grillo, A. F.; Grubb, T. D.; Guarino, F.; Guedes, G. P.; Hampel, M. R.; Hansen, P.; Harari, D.; Harrison, T. A.; Harton, J. L.; Hasankiadeh, Q.; Haungs, A.; Hebbeker, T.; Heck, D.; Heimann, P.; Herve, A. E.; Hill, G. C.; Hojvat, C.; Holt, E.; Homola, P.; Hörandel, J. R.; Horvath, P.; Hrabovský, M.; Huege, T.; Hulsman, J.; Insolia, A.; Isar, P. G.; Jandt, I.; Jansen, S.; Johnsen, J. A.; Josebachuili, M.; Kääpä, A.; Kambeitz, O.; Kampert, K. H.; Katkov, I.; Keilhauer, B.; Kemp, E.; Kemp, J.; Kieckhafer, R. M.; Klages, H. O.; Kleifges, M.; Kleinfeller, J.; Krause, R.; Krohm, N.; Kuempel, D.; Kukec Mezek, G.; Kunka, N.; Kuotb Awad, A.; LaHurd, D.; Lauscher, M.; Legumina, R.; Leigui de Oliveira, M. A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; Link, K.; Lopes, L.; López, R.; López Casado, A.; Luce, Q.; Lucero, A.; Malacari, M.; Mallamaci, M.; Mandat, D.; Mantsch, P.; Mariazzi, A. G.; Mariş, I. C.; Marsella, G.; Martello, D.; Martinez, H.; Martínez Bravo, O.; Masías Meza, J. J.; Mathes, H. J.; Mathys, S.; Matthews, J.; Matthews, J. A. J.; Matthiae, G.; Mayotte, E.; Mazur, P. O.; Medina, C.; Medina-Tanco, G.; Melo, D.; Menshikov, A.; Messina, S.; Micheletti, M. I.; Middendorf, L.; Minaya, I. A.; Miramonti, L.; Mitrica, B.; Mockler, D.; Mollerach, S.; Montanet, F.; Morello, C.; Mostafá, M.; Müller, A. L.; Müller, G.; Muller, M. A.; Müller, S.; Mussa, R.; Naranjo, I.; Nellen, L.; Nguyen, P. H.; Niculescu-Oglinzanu, M.; Niechciol, M.; Niemietz, L.; Niggemann, T.; Nitz, D.; Nosek, D.; Novotny, V.; Nožka, H.; Núñez, L. A.; Ochilo, L.; Oikonomou, F.; Olinto, A.; Pakk Selmi-Dei, D.; Palatka, M.; Pallotta, J.; Papenbreer, P.; Parente, G.; Parra, A.; Paul, T.; Pech, M.; Pedreira, F.; Pȩkala, J.; Pelayo, R.; Peña-Rodriguez, J.; Pereira, L. A. S.; Perlín, M.; Perrone, L.; Peters, C.; Petrera, S.; Phuntsok, J.; Piegaia, R.; Pierog, T.; Pieroni, P.; Pimenta, M.; Pirronello, V.; Platino, M.; Plum, M.; Porowski, C.; Prado, R. R.; Privitera, P.; Prouza, M.; Quel, E. J.; Querchfeld, S.; Quinn, S.; Ramos-Pollan, R.; Rautenberg, J.; Ravignani, D.; Revenu, B.; Ridky, J.; Risse, M.; Ristori, P.; Rizi, V.; Rodrigues de Carvalho, W.; Rodriguez Fernandez, G.; Rodriguez Rojo, J.; Rogozin, D.; Roncoroni, M. J.; Roth, M.; Roulet, E.; Rovero, A. C.; Ruehl, P.; Saffi, S. J.; Saftoiu, A.; Salazar, H.; Saleh, A.; Salesa Greus, F.; Salina, G.; Sánchez, F.; Sanchez-Lucas, P.; Santos, E. M.; Santos, E.; Sarazin, F.; Sarmento, R.; Sarmiento, C. A.; Sato, R.; Schauer, M.; Scherini, V.; Schieler, H.; Schimp, M.; Schmidt, D.; Scholten, O.; Schovánek, P.; Schröder, F. G.; Schulz, A.; Schulz, J.; Schumacher, J.; Sciutto, S. J.; Segreto, A.; Settimo, M.; Shadkam, A.; Shellard, R. C.; Sigl, G.; Silli, G.; Sima, O.; Śmiałkowski, A.; Šmída, R.; Snow, G. R.; Sommers, P.; Sonntag, S.; Sorokin, J.; Squartini, R.; Stanca, D.; Stanič, S.; Stasielak, J.; Stassi, P.; Strafella, F.; Suarez, F.; Suarez Durán, M.; Sudholz, T.; Suomijärvi, T.; Supanitsky, A. D.; Swain, J.; Szadkowski, Z.; Taboada, A.; Taborda, O. A.; Tapia, A.; Theodoro, V. M.; Timmermans, C.; Todero Peixoto, C. J.; Tomankova, L.; Tomé, B.; Torralba Elipe, G.; Torri, M.; Travnicek, P.; Trini, M.; Ulrich, R.; Unger, M.; Urban, M.; Valdés Galicia, J. F.; Valiño, I.; Valore, L.; van Aar, G.; van Bodegom, P.; van den Berg, A. M.; van Vliet, A.; Varela, E.; Vargas Cárdenas, B.; Varner, G.; Vázquez, J. R.; Vázquez, R. A.; Veberič, D.; Vergara Quispe, I. D.; Verzi, V.; Vicha, J.; Villaseñor, L.; Vorobiov, S.; Wahlberg, H.; Wainberg, O.; Walz, D.; Watson, A. A.; Weber, M.; Weindl, A.; Wiencke, L.; Wilczyński, H.; Winchen, T.; Wittkowski, D.; Wundheiler, B.; Yang, L.; Yelos, D.; Yushkov, A.; Zas, E.; Zavrtanik, D.; Zavrtanik, M.; Zepeda, A.; Zimmermann, B.; Ziolkowski, M.; Zong, Z.; Zuccarello, F.
2017-06-01
We report a multi-resolution search for anisotropies in the arrival directions of cosmic rays detected at the Pierre Auger Observatory with local zenith angles up to 80o and energies in excess of 4 EeV (4 × 1018 eV). This search is conducted by measuring the angular power spectrum and performing a needlet wavelet analysis in two independent energy ranges. Both analyses are complementary since the angular power spectrum achieves a better performance in identifying large-scale patterns while the needlet wavelet analysis, considering the parameters used in this work, presents a higher efficiency in detecting smaller-scale anisotropies, potentially providing directional information on any observed anisotropies. No deviation from isotropy is observed on any angular scale in the energy range between 4 and 8 EeV. Above 8 EeV, an indication for a dipole moment is captured; while no other deviation from isotropy is observed for moments beyond the dipole one. The corresponding p-values obtained after accounting for searches blindly performed at several angular scales, are 1.3 × 10-5 in the case of the angular power spectrum, and 2.5 × 10-3 in the case of the needlet analysis. While these results are consistent with previous reports making use of the same data set, they provide extensions of the previous works through the thorough scans of the angular scales.
Khan, Adil Mehmood; Siddiqi, Muhammad Hameed; Lee, Seok-Won
2013-09-27
Smartphone-based activity recognition (SP-AR) recognizes users' activities using the embedded accelerometer sensor. Only a small number of previous works can be classified as online systems, i.e., the whole process (pre-processing, feature extraction, and classification) is performed on the device. Most of these online systems use either a high sampling rate (SR) or long data-window (DW) to achieve high accuracy, resulting in short battery life or delayed system response, respectively. This paper introduces a real-time/online SP-AR system that solves this problem. Exploratory data analysis was performed on acceleration signals of 6 activities, collected from 30 subjects, to show that these signals are generated by an autoregressive (AR) process, and an accurate AR-model in this case can be built using a low SR (20 Hz) and a small DW (3 s). The high within class variance resulting from placing the phone at different positions was reduced using kernel discriminant analysis to achieve position-independent recognition. Neural networks were used as classifiers. Unlike previous works, true subject-independent evaluation was performed, where 10 new subjects evaluated the system at their homes for 1 week. The results show that our features outperformed three commonly used features by 40% in terms of accuracy for the given SR and DW.
Recent variations in seasonality of temperature and precipitation in Canada, 1976-95
NASA Astrophysics Data System (ADS)
Whitfield, Paul H.; Bodtker, Karin; Cannon, Alex J.
2002-11-01
A previously reported analysis of rehabilitated monthly temperature and precipitation time series for several hundred stations across Canada showed generally spatially coherent patterns of variation between two decades (1976-85 and 1986-95). The present work expands that analysis to finer time scales and a greater number of stations. We demonstrate how the finer temporal resolution, at 5 day or 11 day intervals, increases the separation between clusters of recent variations in seasonal patterns of temperature and precipitation. We also expand the analysis by increasing the number of stations from only rehabilitated monthly data sets to rehabilitated daily sets, then to approximately 1500 daily observation stations. This increases the spatial density of data and allows a finer spatial resolution of patterns between the two decades. We also examine the success of clustering partial records, i.e. sites where the data record is incomplete. The intent of this study was to be consistent with previous work and explore how greater temporal and spatial detail in the climate data affects the resolution of patterns of recent climate variations. The variations we report for temperature and precipitation are taking place at different temporal and spatial scales. Further, the spatial patterns are much broader than local climate regions and ecozones, indicating that the differences observed may be the result of variations in atmospheric circulation.
Improving accuracy and power with transfer learning using a meta-analytic database.
Schwartz, Yannick; Varoquaux, Gaël; Pallier, Christophe; Pinel, Philippe; Poline, Jean-Baptiste; Thirion, Bertrand
2012-01-01
Typical cohorts in brain imaging studies are not large enough for systematic testing of all the information contained in the images. To build testable working hypotheses, investigators thus rely on analysis of previous work, sometimes formalized in a so-called meta-analysis. In brain imaging, this approach underlies the specification of regions of interest (ROIs) that are usually selected on the basis of the coordinates of previously detected effects. In this paper, we propose to use a database of images, rather than coordinates, and frame the problem as transfer learning: learning a discriminant model on a reference task to apply it to a different but related new task. To facilitate statistical analysis of small cohorts, we use a sparse discriminant model that selects predictive voxels on the reference task and thus provides a principled procedure to define ROIs. The benefits of our approach are twofold. First it uses the reference database for prediction, i.e., to provide potential biomarkers in a clinical setting. Second it increases statistical power on the new task. We demonstrate on a set of 18 pairs of functional MRI experimental conditions that our approach gives good prediction. In addition, on a specific transfer situation involving different scanners at different locations, we show that voxel selection based on transfer learning leads to higher detection power on small cohorts.
Analysis of 20 magnetic clouds at 1 AU during a solar minimum
NASA Astrophysics Data System (ADS)
Gulisano, A. M.; Dasso, S.; Mandrini, C. H.; Démoulin, P.
We study 20 magnetic clouds, observed in situ by the spacecraft Wind, at the Lagrangian point L1, from 22 August, 1995, to 7 November, 1997. In previous works, assuming a cylindrical symmetry for the local magnetic configuration and a satellite trajectory crossing the axis of the cloud, we obtained their orientations using a minimum variance analysis. In this work we compute the orientations and magnetic configurations using a non-linear simultaneous fit of the geometric and physical parameters for a linear force-free model, including the possibility of a not null impact parameter. We quantify global magnitudes such as the relative magnetic helicity per unit length and compare the values found with both methods (minimum variance and the simultaneous fit). FULL TEXT IN SPANISH
[Pierre Bourdieu and health: a sociological analysis of Actes de la Recherche en Sciences Sociales].
Montagner, Miguel Angelo
2008-07-01
This study aimed to highlight, illustrate, describe, and comment on the presence of the health category in the work of Pierre Bourdieu, by underlining the themes traditionally related to the sociology of the body. After a systematic analysis of his work in the sociology of medicine and health, the article also addresses the main vehicle for his line of thought, namely Actes de la Recherche en Sciences Sociales, viewed here as the prime channel for most of the research taking Bourdieu's "genetic structuralism" as the main theoretical reference. We analyze the articles published from 1975 to 2001, from the thematic and theoretical/conceptual perspective, by comparing the changes appearing in this journal in opposition to the model previously adopted by the Revue Française de Sociologie.
The roles of energy and material efficiency in meeting steel industry CO2 targets.
Milford, Rachel L; Pauliuk, Stefan; Allwood, Julian M; Müller, Daniel B
2013-04-02
Identifying strategies for reducing greenhouse gas emissions from steel production requires a comprehensive model of the sector but previous work has either failed to consider the whole supply chain or considered only a subset of possible abatement options. In this work, a global mass flow analysis is combined with process emissions intensities to allow forecasts of future steel sector emissions under all abatement options. Scenario analysis shows that global capacity for primary steel production is already near to a peak and that if sectoral emissions are to be reduced by 50% by 2050, the last required blast furnace will be built by 2020. Emissions reduction targets cannot be met by energy and emissions efficiency alone, but deploying material efficiency provides sufficient extra abatement potential.
Night work and prostate cancer in men: a Swedish prospective cohort study.
Åkerstedt, Torbjrn; Narusyte, Jurgita; Svedberg, Pia; Kecklund, Göran; Alexanderson, Kristina
2017-06-08
Prostate cancer is the most common cancer and the second leading cause of cancer-related deaths among men, but the contributing factors are unclear. One such may be night work because of the day/night alternation of work and the resulting disturbance of the circadian system. The purpose of the present study was to investigate the prospective relation between number of years with night work and prostate cancer in men. Cohort study comparing night and day working twins with respect to incident prostate cancer in 12 322 men. Individuals in the Swedish Twin Registry. 12 322 male twins. Prostate cancer diagnoses obtained from the Swedish Cancer Registry with a follow-up time of 12 years, with a total number of cases=454. Multiple Cox proportional hazard regression analysis, adjusted for a number of covariates, showed no association between ever night work and prostate cancer, nor for duration of night work and prostate cancer. Analysis of twin pairs discordant for prostate cancer (n=332) showed no significant association between night work and prostate cancer. The results, together with previous studies, suggest that night work does not seem to constitute a risk factor for prostate cancer. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Hospital nurses' work environment, quality of care provided and career plans.
Hinno, S; Partanen, P; Vehviläinen-Julkunen, K
2011-06-01
In several European countries, the availability of qualified nurses is insufficient to meet current healthcare requirements. Nurses are highly dissatisfied with the rising demands of the healthcare environment and increasingly considering leaving their jobs. The study aims to investigate the relationships between the characteristics of hospital nurses' work environment and the quality of care provided, and furthermore to examine Dutch nurses' career plans. A cross-sectional, questionnaire survey of registered nurses (n = 334) working in the academic and district hospitals was conducted in 2005/2006. Previously validated questionnaires translated into the participants' language were used. Factor and regression analysis were used for data analysis. Overall, nurses rated their work environment rather favourably. Five work environment characteristics were identified: support for professional development, adequate staffing, nursing competence, supportive management and teamwork. Significant relationships were found between nurses' perceptions of their work environment characteristics and quality of care provided and nurses' career plans. When work environment characteristics were evaluated to be better, nurse-assessed quality of care also increased and intentions to leave current job decreased linearly. Study findings suggest that nurses' perceptions of their work environment are important for nurse outcomes in hospital settings. Further research is needed to explore the predictive ability of the work environment for nurse, patient and organizational outcomes in hospitals. © 2011 The Authors. International Nursing Review © 2011 International Council of Nurses.
Dentists' attitude to provision of care for people with learning disabilities in Udaipur, India.
Nagarajappa, Ramesh; Tak, Mridula; Sharda, Archana J; Asawa, Kailash; Jalihal, Sagar; Kakatkar, Gauri
2013-03-01
This study determines and compares the attitudes of dentists to the provision of care for people with learning disabilities according to gender, qualification, previous experience of treating patients with learning disabilities and work experience of dentists. A cross-sectional study was conducted among 247 dentists (166 men and 81 women) using a pretested structured questionnaire. This questionnaire assessed the respondent's attitude towards learning-disabled patients in five categories: beliefs about treating them, their capabilities, discrimination against these patients, their social behaviour and quality of care to be received by these patients. The information on dentist's gender, qualification, work experience and previous experience of treating patients with learning disabilities was also collected through questionnaire. The Student's t-test and anova test were used for statistical analysis. The mean attitude score was found to be 71.13 ± 8.97. A statistically significant difference was found in the mean attitude scores of dentists with work experience (p = 0.000). Study subjects with postgraduate qualification and previous experience of treating patients with learning disabilities had significantly greater mean attitude score than their counterparts (p = 0.000). The overall attitude of dentists towards provision of care for people with learning disabilities was favourable, which increased with higher qualification and past experience. © 2012 The Authors. Scandinavian Journal of Caring Sciences © 2012 Nordic College of Caring Science.
Selective updating of working memory content modulates meso-cortico-striatal activity.
Murty, Vishnu P; Sambataro, Fabio; Radulescu, Eugenia; Altamura, Mario; Iudicello, Jennifer; Zoltick, Bradley; Weinberger, Daniel R; Goldberg, Terry E; Mattay, Venkata S
2011-08-01
Accumulating evidence from non-human primates and computational modeling suggests that dopaminergic signals arising from the midbrain (substantia nigra/ventral tegmental area) mediate striatal gating of the prefrontal cortex during the selective updating of working memory. Using event-related functional magnetic resonance imaging, we explored the neural mechanisms underlying the selective updating of information stored in working memory. Participants were scanned during a novel working memory task that parses the neurophysiology underlying working memory maintenance, overwriting, and selective updating. Analyses revealed a functionally coupled network consisting of a midbrain region encompassing the substantia nigra/ventral tegmental area, caudate, and dorsolateral prefrontal cortex that was selectively engaged during working memory updating compared to the overwriting and maintenance of working memory content. Further analysis revealed differential midbrain-dorsolateral prefrontal interactions during selective updating between low-performing and high-performing individuals. These findings highlight the role of this meso-cortico-striatal circuitry during the selective updating of working memory in humans, which complements previous research in behavioral neuroscience and computational modeling. Published by Elsevier Inc.
Evaluation of Savings in Energy-Efficient Public Housing in the Pacific Northwest
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
2013-10-01
This report presents the results of an energy performance and cost-effectiveness analysis. The Salishan phase 7 and demonstration homes were compared to Salishan phase 6 homes built to 2006 Washington State Energy Code specifications 2. Predicted annual energy savings (over Salishan phase 6) was 19% for Salishan phase 7, and between 19-24% for the demonstration homes (depending on ventilation strategy). Approximately two-thirds of the savings are attributable to the DHP. Working with the electric utility provider, Tacoma Public Utilities, researchers conducted a billing analysis for Salishan phase 7. Median energy use for the development is 11,000 kWh; annual energy costsmore » are $780, with a fair amount of variation dependent on size of home. Preliminary analysis of savings between Salishan 7 and previous phases (4 through 6) suggest savings of between 20 and 30 percent. A more comprehensive comparison between Salishan 7 and previous phases will take place in year two of this project.« less
Evaluation of Savings in Energy-Efficient Public Housing in the Pacific Northwest
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gordon, A.; Lubliner, M.; Howard, L.
2013-10-01
This report presents the results of an energy performance and cost-effectiveness analysis. The Salishan phase 7 and demonstration homes were compared to Salishan phase 6 homes built to 2006 Washington State Energy Code specifications 2. Predicted annual energy savings (over Salishan phase 6) was 19% for Salishan phase 7, and between 19-24% for the demonstration homes (depending on ventilationstrategy). Approximately two-thirds of the savings are attributable to the DHP. Working with the electric utility provider, Tacoma Public Utilities, researchers conducted a billing analysis for Salishan phase 7. Median energy use for the development is 11,000 kWh; annual energy costs aremore » $780, with a fair amount of variation dependent on size of home. Preliminary analysis of savings betweenSalishan 7 and previous phases (4 through 6) suggest savings of between 20 and 30 percent. A more comprehensive comparison between Salishan 7 and previous phases will take place in year two of this project.« less
Volatility and correlation-based systemic risk measures in the US market
NASA Astrophysics Data System (ADS)
Civitarese, Jamil
2016-10-01
This paper deals with the problem of how to use simple systemic risk measures to assess portfolio risk characteristics. Using three simple examples taken from previous literature, one based on raw and partial correlations, another based on the eigenvalue decomposition of the covariance matrix and the last one based on an eigenvalue entropy, a Granger-causation analysis revealed some of them are not always a good measure of risk in the S&P 500 and in the VIX. The measures selected do not Granger-cause the VIX index in all windows selected; therefore, in the sense of risk as volatility, the indicators are not always suitable. Nevertheless, their results towards returns are similar to previous works that accept them. A deeper analysis has shown that any symmetric measure based on eigenvalue decomposition of correlation matrices, however, is not useful as a measure of "correlation" risk. The empirical counterpart analysis of this proposition stated that negative correlations are usually small and, therefore, do not heavily distort the behavior of the indicator.
Fry, John C; Webster, Gordon; Cragg, Barry A; Weightman, Andrew J; Parkes, R John
2006-10-01
The aim of this work was to relate depth profiles of prokaryotic community composition with geochemical processes in the deep subseafloor biosphere at two shallow-water sites on the Peru Margin in the Pacific Ocean (ODP Leg 201, sites 1228 and 1229). Principal component analysis of denaturing gradient gel electrophoresis banding patterns of deep-sediment Bacteria, Archaea, Euryarchaeota and the novel candidate division JS1, followed by multiple regression, showed strong relationships with prokaryotic activity and geochemistry (R(2)=55-100%). Further correlation analysis, at one site, between the principal components from the community composition profiles for Bacteria and 12 other variables quantitatively confirmed their relationship with activity and geochemistry, which had previously only been implied. Comparison with previously published cell counts enumerated by fluorescent in situ hybridization with rRNA-targeted probes confirmed that these denaturing gradient gel electrophoresis profiles described an active prokaryotic community.
2013-01-01
Introduction The Severe Impairment Battery (SIB) is validated for assessing cognition in patients with severe dementia. The current analysis aimed to further investigate the cognitive efficacy of rivastigmine capsules, as assessed by SIB factor scores, in patients with moderately severe-to-severe Alzheimer’s disease (AD). Methods This was a retrospective analysis of a 26-week, multicenter, randomized, double-blind, placebo-controlled study of oral rivastigmine conducted in Spain. Previously reported outcome measures included the full SIB. Current analyses examined calculated scores and effect sizes for the change from baseline at Week 26 on: newly defined SIB subscales (derived by a factor analysis of the 40 SIB items, using the PROC FACTOR function (SAS)); previously defined memory, language and praxis subscales (derived by previous analysis of the nine SIB domains); and the individual SIB items. Treatment differences were assessed. Results SIB data were provided by 104 rivastigmine-treated patients and 106 patients receiving placebo (Intent-To-Treat Last Observation Carried Forward population). Significantly less decline was observed on the previously defined memory and language subscales, and the newly defined working memory/memory subscale in rivastigmine-treated patients (all P < 0.05 versus placebo). Calculation of effect sizes demonstrated numerically greater efficacy of rivastigmine versus placebo on each of the subscales, and a broad range of SIB items; greatest effect sizes were observed on SIB items assessing the current month (effect size = 0.30) and digit span series (effect size = 0.33). Conclusions These data suggest the observed efficacy of rivastigmine in moderately severe-to-severe AD is likely a cumulative effect across a range of tasks. Rivastigmine demonstrates broad cognitive efficacy in this patient population. PMID:24351447
The 1943 K emission spectrum of H216O between 6600 and 7050 cm-1
NASA Astrophysics Data System (ADS)
Czinki, Eszter; Furtenbacher, Tibor; Császár, Attila G.; Eckhardt, André K.; Mellau, Georg Ch.
2018-02-01
An emission spectrum of H216O has been recorded, with Doppler-limited resolution, at 1943 K using Hot Gas Molecular Emission (HOTGAME) spectroscopy. The wavenumber range covered is 6600 to 7050 cm-1. This work reports the analysis and subsequent assignment of close to 3700 H216O transitions out of a total of more than 6700 measured peaks. The analysis is based on the Measured Active Rotational-Vibrational Energy Levels (MARVEL) energy levels of H216O determined in 2013 and emission line intensities obtained from accurate variational nuclear-motion computations. The analysis of the spectrum yields about 1300 transitions not measured previously and 23 experimentally previously unidentified rovibrational energy levels. The accuracy of the line positions and intensities used in the analysis was improved with the spectrum deconvolution software SyMath via creating a peak list corresponding to the dense emission spectrum. The extensive list of labeled transitions and the new experimental energy levels obtained are deposited in the Supplementary Material of this article as well as in the ReSpecTh (http://www.respecth.hu) information system.
Long-term cycles in the history of life: periodic biodiversity in the paleobiology database.
Melott, Adrian L
2008-01-01
Time series analysis of fossil biodiversity of marine invertebrates in the Paleobiology Database (PBDB) shows a significant periodicity at approximately 63 My, in agreement with previous analyses based on the Sepkoski database. I discuss how this result did not appear in a previous analysis of the PBDB. The existence of the 63 My periodicity, despite very different treatment of systematic error in both PBDB and Sepkoski databases strongly argues for consideration of its reality in the fossil record. Cross-spectral analysis of the two datasets finds that a 62 My periodicity coincides in phase by 1.6 My, equivalent to better than the errors in either measurement. Consequently, the two data sets not only contain the same strong periodicity, but its peaks and valleys closely correspond in time. Two other spectral peaks appear in the PBDB analysis, but appear to be artifacts associated with detrending and with the increased interval length. Sampling-standardization procedures implemented by the PBDB collaboration suggest that the signal is not an artifact of sampling bias. Further work should focus on finding the cause of the 62 My periodicity.
Combustion-acoustic stability analysis for premixed gas turbine combustors
NASA Technical Reports Server (NTRS)
Darling, Douglas; Radhakrishnan, Krishnan; Oyediran, Ayo; Cowan, Lizabeth
1995-01-01
Lean, prevaporized, premixed combustors are susceptible to combustion-acoustic instabilities. A model was developed to predict eigenvalues of axial modes for combustion-acoustic interactions in a premixed combustor. This work extends previous work by including variable area and detailed chemical kinetics mechanisms, using the code LSENS. Thus the acoustic equations could be integrated through the flame zone. Linear perturbations were made of the continuity, momentum, energy, chemical species, and state equations. The qualitative accuracy of our approach was checked by examining its predictions for various unsteady heat release rate models. Perturbations in fuel flow rate are currently being added to the model.
Continued Development of a Precision Cryogenic Dilatometer for the James Webb Space Telescope
NASA Technical Reports Server (NTRS)
Karlmann, Paul B.; Dudik, Matthew J.; Halverson, Peter G.; Levine, Marie; Marcin, Martin; Peters, Robert D.; Shaklan, Stuart; VanBuren, David
2004-01-01
As part of the James Webb Space Telescope (JWST) materials working group, a novel cryogenic dilatometer was designed and built at NASA Jet Propulsion Laboratory to help address stringent coefficient of thermal expansion (CTE) knowledge requirements. Previously reported results and error analysis have estimated a CTE measurement accuracy for ULE of 1.7 ppb/K with a 20K thermal load and 0.1 ppb/K with a 280K thermal load. Presented here is a further discussion of the cryogenic dilatometer system and a description of recent work including system modifications and investigations.
Flow induced vibrations in the SSME injector heads
NASA Technical Reports Server (NTRS)
Lepore, Frank A.
1991-01-01
A description is given of the flowfield in the Space Shuttle Main Engine (SSME) powerhead, the mechanisms which control flow-induced vibrations, and previous experimental work. An in-depth description is given of the development phase of the program , which includes the analysis, design, and fabrication of liquid oxygen (LOX) posts models used in the experimental phase, as well as test facilities, equipment, and procedures used. Also covered is the experimental data analysis, which includes overall steady state powerhead flowfield as well as the high frequency response of the LOX posts.
Avoidance of criminality in abused and neglected children.
Widom, C S
1991-05-01
This paper compares previously abused and neglected children who have avoided official records of delinquency and adult criminality with those who have not. The goal of this analysis is to uncover potential mediating variables that may act to buffer or protect maltreated children from later delinquency and criminality. It is hoped that this analysis will provoke others to consider the "invulnerable" among the abused and neglected so that we might ultimately learn what works to protect them. In terms of "competence" as an outcome, these findings must be treated as preliminary.
Bartram, Timothy; Casimir, Gian; Djurkovic, Nick; Leggat, Sandra G; Stanton, Pauline
2012-07-01
The purpose of this article was to explore the relationships between perceived high performance work systems, emotional labour, burnout and intention to leave among nurses in Australia. Previous studies show that emotional labour and burnout are associated with an increase in intention to leave of nurses. There is evidence that high performance work systems are in association with a decrease in turnover. There are no previous studies that examine the relationship between high performance work systems and emotional labour. A cross-sectional, correlational survey. The study was conducted in Australia in 2008 with 183 nurses. Three hypotheses were tested with validated measures of emotional labour, burnout, intention to leave, and perceived high performance work systems. Principal component analysis was used to examine the structure of the measures. The mediation hypothesis was tested using Baron and Kenny's procedure and the moderation hypothesis was tested using hierarchical regression and the product-term. Emotional labour is positively associated with both burnout and intention to leave. Burnout mediates the relationship between emotional labour and intention to leave. Perceived high performance work systems negatively moderates the relationship between emotional labour and burnout. Perceived high performance work systems not only reduces the strength of the negative effect of emotional labour on burnout but also has a unique negative effect on intention to leave. Ensuring effective human resource management practice through the implementation of high performance work systems may reduce the burnout associated with emotional labour. This may assist healthcare organizations to reduce nurse turnover. © 2012 Blackwell Publishing Ltd.
McMunn, Anne; Lacey, Rebecca E; Kumari, Meena; Worts, Diana; McDonough, Peggy; Sacker, Amanda
2016-05-01
Previous studies have found generally better health among those who combine employment and family responsibilities; however, most research excludes men, and relies on subjective measures of health and information on work and family activities from only 1 or 2 time points in the life course. This study investigated associations between work-family life course types (LCTs) and markers of metabolic risk in a British birth cohort study. Multichannel sequence analysis was used to generate work-family LCTs, combining annual information on work, partnership and parenthood between 16 and 42 years for men and women in the British National Child Development Study (NCDS, followed since their birth in 1958). Associations between work-family LCTs and metabolic risk factors in mid-life (age 44-45) were tested using multivariate linear regression in multiply imputed data. Life courses characterised by earlier transitions into parenthood were associated with significantly increased metabolic risk, regardless of attachment to paid work or marital stability over the life course. These associations were only partially attenuated by educational qualifications, early life circumstances and adult mediators. The positive association between weak labour markets ties and metabolic risk was weaker than might be expected from previous studies. Associations between work-family LCTs and metabolic risk factors did not differ significantly by gender. Earlier transitions to parenthood are linked to metabolic risk in mid-life. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Utilization of non-conventional systems for conversion of biomass to food components
NASA Technical Reports Server (NTRS)
Karel, M.; Nakhost, Z.
1989-01-01
Described here is work accomplished in investigating the potential use of micro-algae in yielding useful macronutrients for closed ecological life support systems in space habitats. Analysis of the chemical composition of the blue-green alga Synechoccus 6311 was done in the present work, and was compared to values found in previous work on the green algae Scenedesmus obliquus. Similar values were obtained for proteins, and lower values for nucleic acids and lipids. A second part of the work involved fabrication of food products containing various levels of incorporated algae (S. obliquus) proteins and/or lipids. Protein isolate was incorporated into a variety of food products such as bran muffins, fettuccine (spinach noodle imitation), and chocolate chip cookies. In the sensory analysis, the greenish color of the bran muffins and cookies was not found to be objectionable. The mild spinachy flavor was less detectable in chocolate chip cookies than in bran muffins. The color and taste of the algae noodles were found to be pleasant and compared well with commercially available spinach noodles.
NASA Astrophysics Data System (ADS)
Sánchez, D.; Muñoz de Escalona, J. M.; Monje, B.; Chacartegui, R.; Sánchez, T.
This article presents a novel proposal for complex hybrid systems comprising high temperature fuel cells and thermal engines. In this case, the system is composed by a molten carbonate fuel cell with cascaded hot air turbine and Organic Rankine Cycle (ORC), a layout that is based on subsequent waste heat recovery for additional power production. The work will credit that it is possible to achieve 60% efficiency even if the fuel cell operates at atmospheric pressure. The first part of the analysis focuses on selecting the working fluid of the Organic Rankine Cycle. After a thermodynamic optimisation, toluene turns out to be the most efficient fluid in terms of cycle performance. However, it is also detected that the performance of the heat recovery vapour generator is equally important, what makes R245fa be the most interesting fluid due to its balanced thermal and HRVG efficiencies that yield the highest global bottoming cycle efficiency. When this fluid is employed in the compound system, conservative operating conditions permit achieving 60% global system efficiency, therefore accomplishing the initial objective set up in the work. A simultaneous optimisation of gas turbine (pressure ratio) and ORC (live vapour pressure) is then presented, to check if the previous results are improved or if the fluid of choice must be replaced. Eventually, even if system performance improves for some fluids, it is concluded that (i) R245fa is the most efficient fluid and (ii) the operating conditions considered in the previous analysis are still valid. The work concludes with an assessment about safety-related aspects of using hydrocarbons in the system. Flammability is studied, showing that R245fa is the most interesting fluid also in this regard due to its inert behaviour, as opposed to the other fluids under consideration all of which are highly flammable.
A mixed-methods study of interprofessional learning of resuscitation skills.
Bradley, Paul; Cooper, Simon; Duncan, Fiona
2009-09-01
This study aimed to identify the effects of interprofessional resuscitation skills teaching on medical and nursing students' attitudes, leadership, team-working and performance skills. Year 2 medical and nursing students learned resuscitation skills in uniprofessional or interprofessional settings, prior to undergoing observational ratings of video-recorded leadership, teamwork and skills performance and subsequent focus group interviews. The Readiness for Interprofessional Learning Scale (RIPLS) was administered pre- and post-intervention and again 3-4 months later. There was no significant difference between interprofessional and uniprofessional teams for leadership, team dynamics or resuscitation tasks performance. Gender, previous interprofessional learning experience, professional background and previous leadership experience had no significant effect. Interview analysis showed broad support for interprofessional education (IPE) matched to clinical reality with perceived benefits for teamwork, communication and improved understanding of roles and perspectives. Concerns included inappropriate role adoption, hierarchy issues, professional identity and the timing of IPE episodes. The RIPLS subscales for professional identity and team-working increased significantly post-intervention for interprofessional groups but returned to pre-test levels by 3-4 months. However, interviews showed interprofessional groups retained a 'residual positivity' towards IPE, more so than uniprofessional groups. An intervention based on common, relevant, shared learning outcomes set in a realistic educational context can work with students who have differing levels of previous IPE and skills training experience. Qualitatively, positive attitudes outlast quantitative changes measured using the RIPLS. Further quantitative and qualitative work is required to examine other domains of learning, the timing of interventions and impact on attitudes towards IPE.
Dzyubachyk, Oleh; Essers, Jeroen; van Cappellen, Wiggert A; Baldeyron, Céline; Inagaki, Akiko; Niessen, Wiro J; Meijering, Erik
2010-10-01
Complete, accurate and reproducible analysis of intracellular foci from fluorescence microscopy image sequences of live cells requires full automation of all processing steps involved: cell segmentation and tracking followed by foci segmentation and pattern analysis. Integrated systems for this purpose are lacking. Extending our previous work in cell segmentation and tracking, we developed a new system for performing fully automated analysis of fluorescent foci in single cells. The system was validated by applying it to two common tasks: intracellular foci counting (in DNA damage repair experiments) and cell-phase identification based on foci pattern analysis (in DNA replication experiments). Experimental results show that the system performs comparably to expert human observers. Thus, it may replace tedious manual analyses for the considered tasks, and enables high-content screening. The described system was implemented in MATLAB (The MathWorks, Inc., USA) and compiled to run within the MATLAB environment. The routines together with four sample datasets are available at http://celmia.bigr.nl/. The software is planned for public release, free of charge for non-commercial use, after publication of this article.
A New Class of Macrocyclic Chiral Selectors for Stereochemical Analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1999-03-11
This report summarizes the work accomplished in the authors laboratories over the previous three years. During the funding period they have had 23 monographs published or in press, 1 book chapter, 1 patent issued and have delivered 28 invited seminars or plenary lectures on DOE sponsored research. This report covers the work that has been published (or accepted). The most notable aspect of this work involves the successful development and understanding of a new class of fused macrocyclic compounds as pseudophases and selectors in high performance separations (including high performance liquid chromatography, HPLC; capillary electrophoresis, CE; and thin layer chromatography,more » TLC). They have considerably extended their chiral biomarker work from amber to crude oil and coal. In the process of doing this we've developed several novel separation approaches. They finished their work on the new GSC-PLOT column which is now being used by researchers world-wide for the analysis of gases, light hydrocarbons and halocarbons. Finally, we completed basic studies on immobilizing a cyclodextrin/oligosiloxane hybrid on the wall of fused silica, as well as a basic study on the separation behavior of buckminster fullerene and higher fullerenes.« less
Meteor showers of the southern hemisphere
NASA Astrophysics Data System (ADS)
Molau, Sirko; Kerr, Steve
2014-04-01
We present the results of an exhaustive meteor shower search in the southern hemisphere. The underlying data set is a subset of the IMO Video Meteor Database comprising 50,000 single station meteors obtained by three Australian cameras between 2001 and 2012. The detection technique was similar to previous single station analysis. In the data set we find 4 major and 6 minor northern hemisphere meteor showers, and 12 segments of the Antihelion source (including the Northern and Southern Taurids and six streams from the MDC working list). We present details for 14 southern hemisphere showers plus the Centaurid and Puppid-Velid complex, with the η Aquariids and the Southern δ Aquariids being the strongest southern showers. Two of the showers (θ^2 Sagittariids and τ Cetids) were previously unknown and have received preliminary designations by the MDC. Overall we find that the fraction of southern meteor showers south of -30deg declination (roughly 25%) is clearly smaller than the fraction of northern meteor showers north of +30deg declination (more than 50%) obtained in our previous analysis.
ERIC Educational Resources Information Center
Kellow, J. Thomas; Frey, Georgia C.; Sandt, Dawn Rosser
2007-01-01
This study is a conceptual replication of previous work by Storey, Stern, & Parker (1990) that examined the influence of participation in integrated vs. segregated recreation/sports activities on evaluations of a person with mental retardation by persons without a disability. The Storey et al., (1990) study observed that people with mental…
NASA Technical Reports Server (NTRS)
Morgan, R. S.; Sattilaro, R. F.
1972-01-01
Atomic absorption spectroscopy, electron microprobe analysis, and dithizone staining of trophozoites and cysts of Entamoeba invadens demonstrate that these cells have a high concentration of zinc (approximately one picogram per cell or 1% of their dry weight). In the cysts of this organism, the zinc is confined to the chromatoid bodies, which previous work has shown to contain crystals of ribosomes. The chemical state and function of this zinc are unknown.
ERIC Educational Resources Information Center
Prevost, Luanna B.; Smith, Michelle K.; Knight, Jennifer K.
2016-01-01
Previous work has shown that students have persistent difficulties in understanding how central dogma processes can be affected by a stop codon mutation. To explore these difficulties, we modified two multiple-choice questions from the Genetics Concept Assessment into three open-ended questions that asked students to write about how a stop codon…
Beyond harmonic sounds in a simple model for birdsong production.
Amador, Ana; Mindlin, Gabriel B
2008-12-01
In this work we present an analysis of the dynamics displayed by a simple bidimensional model of labial oscillations during birdsong production. We show that the same model capable of generating tonal sounds can present, for a wide range of parameters, solutions which are spectrally rich. The role of physiologically sensible parameters is discussed in each oscillatory regime, allowing us to interpret previously reported data.
A homogeneous spectroscopic analysis of host stars of transiting planets
NASA Astrophysics Data System (ADS)
Ammler-von Eiff, M.; Santos, N. C.; Sousa, S. G.; Fernandes, J.; Guillot, T.; Israelian, G.; Mayor, M.; Melo, C.
2009-11-01
Context: The analysis of transiting extra-solar planets provides an enormous amount of information about the formation and evolution of planetary systems. A precise knowledge of the host stars is necessary to derive the planetary properties accurately. The properties of the host stars, especially their chemical composition, are also of interest in their own right. Aims: Information about planet formation is inferred by, among others, correlations between different parameters such as the orbital period and the metallicity of the host stars. The stellar properties studied should be derived as homogeneously as possible. The present work provides new, uniformly derived parameters for 13 host stars of transiting planets. Methods: Effective temperature, surface gravity, microturbulence parameter, and iron abundance were derived from spectra of both high signal-to-noise ratio and high resolution by assuming iron excitation and ionization equilibria. Results: For some stars, the new parameters differ from previous determinations, which is indicative of changes in the planetary radii. A systematic offset in the abundance scale with respect to previous assessments is found for the TrES and HAT objects. Our abundance measurements are remarkably robust in terms of the uncertainties in surface gravities. The iron abundances measured in the present work are supplemented by all previous determinations using the same analysis technique. The distribution of iron abundance then agrees well with the known metal-rich distribution of planet host stars. To facilitate future studies, the spectroscopic results of the current work are supplemented by the findings for other host stars of transiting planets, for a total dataset of 50 objects. Based on observations made with the Italian Telescopio Nazionale Galileo (TNG) operated on the island of La Palma by the Fundación Galileo Galilei of the INAF (Istituto Nazionale di Astrofisica) at the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofisica de Canarias. Based in part on observations made at Observatoire de Haute Provence (CNRS), France. Based on observations made with ESO Telescopes at the La Silla Paranal Observatory under programme ID 080.C-0661.
Confidence regions for neutrino oscillation parameters from double-Chooz data
NASA Astrophysics Data System (ADS)
Vargas Perez, B.; García-Ravelo, J.; Tun, Dionisio; Garcia Bello, Jorge; Escamilla Roa, Jesús
2018-05-01
In this work, an independent and detailed statistical analysis of the double-Chooz experiment is performed. In order to have a thorough understanding of the implications of the double-Chooz data on both oscillation parameters sin2(2 θ13) and Δ m312, we decided to analyze the data corresponding to the Far detector, with no additional restriction. This differs from previous analyses, which only aim to estimate the mixing angle θ13, without mentioning the effects on Δ m312. By doing this, confidence regions and best fit values are obtained for (sin2(2 θ13),Δ m312). This analysis yields an out-of-order Δ m312 minimum, which has already been mentioned in previous works, and it is corrected with the inclusion of additional restrictions. With such restrictions it is obtained that sin2(2 θ13)=0.08 4-0.028+0.030 and Δ m312=2.44 4-0.215+0.187×10-3 eV2/c4 . Our analysis allows us to study the effects of the so-called "spectral bump" around 5 MeV; it is observed that a variation of this spectral bump may be able to move the Δ m312 best fit value, in such a way that Δ m312 takes the order of magnitude of the MINOS value. In other words, if we allow the variation of the spectral bump, then we may be able to determine both oscillation parameters using Far detector data only, with no further restrictions from other experiments. Finally, and with the intention of understanding the effects of the preliminary Near detector data, we performed two different analyses, aiming to eliminate the effects of the energy bump. As a consequence, it is found that unlike the Far detector analysis, the Near detector data may be able to fully determine both oscillation parameters by itself, resulting in sin2(2 θ13)=0.095 ±0.053 and Δ m312=2.6 3-1.15+0.98×10-3 eV2/c4 . The later analyses represent an improvement with respect to previous works, where additional constraints for Δ m312 were necessary.
Impact of model-based risk analysis for liver surgery planning.
Hansen, C; Zidowitz, S; Preim, B; Stavrou, G; Oldhafer, K J; Hahn, H K
2014-05-01
A model-based risk analysis for oncologic liver surgery was described in previous work (Preim et al. in Proceedings of international symposium on computer assisted radiology and surgery (CARS), Elsevier, Amsterdam, pp. 353–358, 2002; Hansen et al. Int I Comput Assist Radiol Surg 4(5):469–474, 2009). In this paper, we present an evaluation of this method. To prove whether and how the risk analysis facilitates the process of liver surgery planning, an explorative user study with 10 liver experts was conducted. The purpose was to compare and analyze their decision-making. The results of the study show that model-based risk analysis enhances the awareness of surgical risk in the planning stage. Participants preferred smaller resection volumes and agreed more on the safety margins’ width in case the risk analysis was available. In addition, time to complete the planning task and confidence of participants were not increased when using the risk analysis. This work shows that the applied model-based risk analysis may influence important planning decisions in liver surgery. It lays a basis for further clinical evaluations and points out important fields for future research.
Yang, Litao; Quan, Sheng; Zhang, Dabing
2017-01-01
Endogenous reference genes (ERG) and their derivate analytical methods are standard requirements for analysis of genetically modified organisms (GMOs). Development and validation of suitable ERGs is the primary step for establishing assays that monitoring the genetically modified (GM) contents in food/feed samples. Herein, we give a review of the ERGs currently used for GM wheat analysis, such as ACC1, PKABA1, ALMT1, and Waxy-D1, as well as their performances in GM wheat analysis. Also, we discussed one model for developing and validating one ideal RG for one plant species based on our previous research work.
NASA Astrophysics Data System (ADS)
Climente-Alarcon, V.; Antonino-Daviu, J.; Riera-Guasp, M.; Pons-Llinares, J.; Roger-Folch, J.; Jover-Rodriguez, P.; Arkkio, A.
2011-02-01
The present work is focused on the diagnosis of mixed eccentricity faults in induction motors via the study of currents demanded by the machine. Unlike traditional methods, based on the analysis of stationary currents (Motor Current Signature Analysis (MCSA)), this work provides new findings regarding the diagnosis approach proposed by the authors in recent years, which is mainly focused on the fault diagnosis based on the analysis of transient quantities, such as startup or plug stopping currents (Transient Motor Current Signature Analysis (TMCSA)), using suitable time-frequency decomposition (TFD) tools. The main novelty of this work is to prove the usefulness of tracking the transient evolution of high-order eccentricity-related harmonics in order to diagnose the condition of the machine, complementing the information obtained with the low-order components, whose transient evolution was well characterised in previous works. Tracking of high-order eccentricity-related harmonics during the transient, through their associated patterns in the time-frequency plane, may significantly increase the reliability of the diagnosis, since the set of fault-related patterns arising after application of the corresponding TFD tool is very unlikely to be caused by other faults or phenomena. Although there are different TFD tools which could be suitable for the transient extraction of these harmonics, this paper makes use of a Wigner-Ville distribution (WVD)-based algorithm in order to carry out the time-frequency decomposition of the startup current signal, since this is a tool showing an excellent trade-off between frequency resolution at both high and low frequencies. Several simulation results obtained with a finite element-based model and experimental results show the validity of this fault diagnosis approach under several faulty and operating conditions. Also, additional signals corresponding to the coexistence of the eccentricity and other non-fault related phenomena making difficult the diagnosis (fluctuating load torque) are included in the paper. Finally, a comparison with an alternative TFD tool - the discrete wavelet transform (DWT) - applied in previous papers, is also carried out in the contribution. The results are promising regarding the usefulness of the methodology for the reliable diagnosis of eccentricities and for their discrimination against other phenomena.
Madsen, Ida E H; Hannerz, Harald; Nyberg, Solja T; Magnusson Hanson, Linda L; Ahola, Kirsi; Alfredsson, Lars; Batty, G David; Bjorner, Jakob B; Borritz, Marianne; Burr, Hermann; Dragano, Nico; Ferrie, Jane E; Hamer, Mark; Jokela, Markus; Knutsson, Anders; Koskenvuo, Markku; Koskinen, Aki; Leineweber, Constanze; Nielsen, Martin L; Nordin, Maria; Oksanen, Tuula; Pejtersen, Jan H; Pentti, Jaana; Salo, Paula; Singh-Manoux, Archana; Suominen, Sakari; Theorell, Töres; Toppinen-Tanner, Salla; Vahtera, Jussi; Väänänen, Ari; Westerholm, Peter J M; Westerlund, Hugo; Fransson, Eleonor; Heikkilä, Katriina; Virtanen, Marianna; Rugulies, Reiner; Kivimäki, Mika
2013-01-01
Previous studies have shown that gainfully employed individuals with high work demands and low control at work (denoted "job strain") are at increased risk of common mental disorders, including depression. Most existing studies have, however, measured depression using self-rated symptom scales that do not necessarily correspond to clinically diagnosed depression. In addition, a meta-analysis from 2008 indicated publication bias in the field. This study protocol describes the planned design and analyses of an individual participant data meta-analysis, to examine whether job strain is associated with an increased risk of clinically diagnosed unipolar depression based on hospital treatment registers. The study will be based on data from approximately 120,000 individuals who participated in 14 studies on work environment and health in 4 European countries. The self-reported working conditions data will be merged with national registers on psychiatric hospital treatment, primarily hospital admissions. Study-specific risk estimates for the association between job strain and depression will be calculated using Cox regressions. The study-specific risk estimates will be pooled using random effects meta-analysis. The planned analyses will help clarify whether job strain is associated with an increased risk of clinically diagnosed unipolar depression. As the analysis is based on pre-planned study protocols and an individual participant data meta-analysis, the pooled risk estimates will not be influenced by selective reporting and publication bias. However, the results of the planned study may only pertain to severe cases of unipolar depression, because of the outcome measure applied.
NASA Astrophysics Data System (ADS)
Darius, D.; Misaran, M. S.; Rahman, Md. M.; Ismail, M. A.; Amaludin, A.
2017-07-01
The study on the effect of the working parameters such as pipe material, pipe length, pipe diameter, depth of burial of the pipe, air flow rate and different types of soils on the thermal performance of earth-air heat exchanger (EAHE) systems is very crucial to ensure that thermal comfort can be achieved. In the past decade, researchers have performed studies to develop numerical models for analysis of EAHE systems. Until recently, two-dimensional models replaced the numerical models in the 1990s and in recent times, more advanced analysis using three-dimensional models, specifically the Computational Fluid Dynamics (CFD) simulation in the analysis of EAHE system. This paper reviews previous models used to analyse the EAHE system and working parameters that affects the earth-air heat exchanger (EAHE) thermal performance as of February 2017. Recent findings on the parameters affecting EAHE performance are also presented and discussed. As a conclusion, with the advent of CFD methods, investigational work have geared up to modelling and simulation work as it saves time and cost. Comprehension of the EAHE working parameters and its effect on system performance is largely established. However, the study on type of soil and its characteristics on the performance of EAHEs systems are surprisingly barren. Therefore, future studies should focus on the effect of soil characteristics such as moisture content, density of soil, and type of soil on the thermal performance of EAHEs system.
Casini, Annalisa; Godin, Isabelle; Clays, Els; Kittel, France
2013-08-01
Previous research has shown that job characteristics, private life and psychosocial factors partially account for gender difference in work absences because of sickness. Most studies have analysed these factors separately. The aim of the present study was to evaluate whether these explanatory factors act as mediators when they are considered simultaneously. The evaluated data set comprises the merger of two Belgian longitudinal studies, BELSTRESS III and SOMSTRESS. It includes 3821 workers (1541 men) aged 21-66 years, employed in eight organizations. A multiple mediation analysis was performed to explain the higher prevalence among women. Estimated factors were occupational grade, total number of paid working hours per week, job strain, overcommitment, home-work interference and social support at and outside work. Prospective data concerning duration and frequency of medically justified sickness absence (registered by the organizations) were used as outcomes. Overall, the mediating factors partially account for gender difference in sickness absence. The strongest mediator for both outcomes is job strain. In addition, difference in absence duration is mediated by social support at work, whereas difference in frequency is mediated by professional grade and home-work interference. Our results call attention to the necessity to elaborate actual preventive actions aiming at favouring a better positioning of women on the labour market in term of hierarchical level as well as in terms of quality of work for reducing sickness absence in this group.
Factors associated with work productivity among people with COPD: Birmingham COPD Cohort.
Rai, Kiran K; Adab, Peymané; Ayres, Jon G; Siebert, W Stanley; Sadhra, Steven S; Sitch, Alice J; Fitzmaurice, David A; Jordan, Rachel E
2017-12-01
Patients with chronic obstructive pulmonary disease (COPD) are more likely to take time off work (absenteeism) and report poor performance at work (presenteeism) compared to those without COPD. Little is known about the modifiable factors associated with these work productivity outcomes. To assess the factors associated with work productivity among COPD patients. Cross-sectional analysis of baseline data from a subsample (those in paid employment) of the Birmingham COPD Cohort study. Absenteeism was defined by self-report over the previous 12 months. Presenteeism was assessed using the Stanford Presenteeism Scale. Logistic regression analysis was used to assess the effects of sociodemographic, clinical and occupational characteristics on work productivity. Among 348 included participants, increasing dyspnoea was the only factor associated with both absenteeism and presenteeism (p for trend<0.01). Additionally, increasing history of occupational exposure to vapours, gases, dusts or fumes (VGDF) was independently associated with presenteeism (p for trend<0.01). This is the first study to identify important factors associated with poor work productivity among patients with COPD. Future studies should evaluate interventions aimed at managing breathlessness and reducing occupational exposures to VGDF on work productivity among patients with COPD. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Psychosocial risk exposures and labour management practices. An exploratory approach.
Llorens, Clara; Alós, Ramon; Cano, Ernest; Font, Ariadna; Jódar, Pere; López, Vicente; Navarro, Albert; Sánchez, Amat; Utzet, Mireia; Moncada, Salvador
2010-02-01
The purpose was to explore the relationship between psychosocial risk exposures and labour management practices (LMP), as indicators of work organization and pertinent features for primary preventive intervention. Cross-sectional study of a representative sample of salaried working population in Spain (n = 7,612). Information was obtained in 2004-2005 using a standardized questionnaire administered through personal interviews at the household. Questions on working conditions were used to establish LMP indicators and the psychosocial exposures data were obtained on the basis of the Copenhagen Psychosocial Questionnaire (COPSOQ) I (ISTAS21). A multivariate description was performed through multiple correspondence analysis, and associations between LMPs and psychosocial exposures were assessed by ordinal logistic analysis adjusting for age and sex. Correspondence analysis showed a good-bad coherent pattern regarding both psychosocial dimension and LMPs, though several LMPs categories were placed in the centre. Among the 14 possible associations of each psychosocial scale with LMP variables, several scales showed significant associations with more than eight LMP variables. Most relevant results referred to the LMP variable ''Consultative and delegative participation in methods''. In line with previous research, psychosocial exposures were associated with LMP. LMP may constitute a step on a pathway from work organization to health. Our exploratory work suggested that good psychosocial exposures were related to participatory working methods, being hired with a permanent labour contract, not being made to feel easily replaceable, having superiors with non-authoritarian and non-aggressive manners, not being threatened with dismissal, upward functional mobility, being paid according to the number of working hours and occupation, working between 31 and 40 hours per week and in regular morning shifts. Hence, the more these features became part of LMP in the workplace, the better the psychosocial work environment would be.
Time for children: trends in the employment patterns of parents, 1967-2009.
Fox, Liana; Han, Wen-Jui; Ruhm, Christopher; Waldfogel, Jane
2013-02-01
Using data from the 1967-2009 years of the March Current Population Surveys (CPS), we examine two important resources for children's well-being: time and money. We document trends in parental employment, from the perspective of children, and show what underlies these trends. We find that increases in family work hours mainly reflect movements into jobs by parents-particularly mothers, who in prior decades would have remained at home. This increase in market work has raised incomes for children in the typical two-parent family but not for those in lone-parent households. Time use data from 1975 and 2003-2008 reveal that working parents spend less time engaged in primary childcare than their counterparts without jobs but more than employed peers in previous cohorts. Analysis of 2004 work schedule data suggests that non-daytime work provides an alternative method of coordinating employment schedules for some dual-earner families.
The Quality of Work in the Belgian Service Voucher System.
Mousaid, Sarah; Huegaerts, Kelly; Bosmans, Kim; Julià, Mireia; Benach, Joan; Vanroelen, Christophe
2017-01-01
Several European countries implemented initiatives to boost the growth of the domestic cleaning sector. Few studies investigated the quality of work in these initiatives, although effects on workers' health and on social health inequalities can be expected. This study contributes to the scant research on this subject, by investigating the quality of work in the Belgian service voucher system - a subsidized system for domestic work. The applied research methodology includes a qualitative content analysis of parliamentary debates, legislation and previous research about the service voucher system and of 40 in-depth interviews with service voucher workers. The study shows that the legal framework that regulates the system must be further enhanced in order to improve the quality of work in the service voucher system. In addition, the actors involved must be better controlled, and sanctioned in case of non-compliance with legislation. © The Author(s) 2016.
Factor structure of a standards-based inventory of competencies in social work with groups.
Macgowan, Mark J; Dillon, Frank R; Spadola, Christine E
2018-01-01
This study extends previous findings on a measure of competencies based on Standards for Social Work Practice with Groups. The Inventory of Competencies in Social Work with Groups (ICSWG) measures confidence in performing the Standards. This study examines the latent structure of the Inventory, while illuminating the underlying structure of the Standards. A multinational sample of 586 persons completed the ICSWG. Exploratory factor analysis (EFA), reliability estimates, standard error of measurement estimates, and a range of validity tests were conducted. The EFA yielded a six-factor solution consisting of core values, mutuality/connectivity, collaboration, and three phases of group development (planning, beginnings/middles, endings). The alphas were .98 for the scale and ranged from .85 to .95 for the subscales. Correlations between the subscales and validators supported evidence of construct validity. The findings suggest key group work domains that should be taught and practiced in social work with groups.
Finite Element Analysis of Poroelastic Composites Undergoing Thermal and Gas Diffusion
NASA Technical Reports Server (NTRS)
Salamon, N. J. (Principal Investigator); Sullivan, Roy M.; Lee, Sunpyo
1995-01-01
A theory for time-dependent thermal and gas diffusion in mechanically time-rate-independent anisotropic poroelastic composites has been developed. This theory advances previous work by the latter two authors by providing for critical transverse shear through a three-dimensional axisymmetric formulation and using it in a new hypothesis for determining the Biot fluid pressure-solid stress coupling factor. The derived governing equations couple material deformation with temperature and internal pore pressure and more strongly couple gas diffusion and heat transfer than the previous theory. Hence the theory accounts for the interactions between conductive heat transfer in the porous body and convective heat carried by the mass flux through the pores. The Bubnov Galerkin finite element method is applied to the governing equations to transform them into a semidiscrete finite element system. A numerical procedure is developed to solve the coupled equations in the space and time domains. The method is used to simulate two high temperature tests involving thermal-chemical decomposition of carbon-phenolic composites. In comparison with measured data, the results are accurate. Moreover unlike previous work, for a single set of poroelastic parameters, they are consistent with two measurements in a restrained thermal growth test.
Analysis and control of the METC fluid bed gasifier. Quarterly report, April 1995--June 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-06-01
This document summarizes work performed for the period 4/1/95 to 7/31/95 on contract no. DE-FG21-94MC31384 (Work accomplished during the period 10/1/94 to 3/31/94 was summarized in the previous technical progress report included in the appendix of this report). In this work, three components will form the basis for design of a control scheme for the Fluidized Bed Gasifier (FBG) at METC: (1) a control systems analysis based on simple linear models derived from process data, (2) review of the literature on fluid bed gasifier operation and control, and (3) understanding of present FBG operation and real world considerations. Tasks accomplishedmore » during the present reporting period include: (1) Completion of a literature survey on Fluid Bed Gasifier control, (2) Observation of the FBG during the week of July 17 to July 21, and (3) Suggested improvements to the control of FBG backpressure and MGCR pressure.« less
Usability Flaws in Medication Alerting Systems: Impact on Usage and Work System.
Marcilly, R; Ammenwerth, E; Roehrer, E; Pelayo, S; Vasseur, F; Beuscart-Zéphir, M-C
2015-08-13
Previous research has shown that medication alerting systems face usability issues. There has been no previous attempt to systematically explore the consequences of usability flaws in such systems on users (i.e. usage problems) and work systems (i.e. negative outcomes). This paper aims at exploring and synthesizing the consequences of usability flaws in terms of usage problems and negative outcomes on the work system. A secondary analysis of 26 papers included in a prior systematic review of the usability flaws in medication alerting was performed. Usage problems and negative outcomes were extracted and sorted. Links between usability flaws, usage problems, and negative outcomes were also analyzed. Poor usability generates a large variety of consequences. It impacts the user from a cognitive, behavioral, emotional, and attitudinal perspective. Ultimately, usability flaws have negative consequences on the workflow, the effectiveness of the technology, the medication management process, and, more importantly, patient safety. Only few complete pathways leading from usability flaws to negative outcomes were identified. Usability flaws in medication alerting systems impede users, and ultimately their work system, and negatively impact patient safety. Therefore, the usability dimension may act as a hidden explanatory variable that could explain, at least partly, the (absence of) intended outcomes of new technology.
Usability Flaws in Medication Alerting Systems: Impact on Usage and Work System
Ammenwerth, E.; Roehrer, E.; Pelayo, S.; Vasseur, F.; Beuscart-Zéphir, M.-C.
2015-01-01
Summary Objectives Previous research has shown that medication alerting systems face usability issues. There has been no previous attempt to systematically explore the consequences of usability flaws in such systems on users (i.e. usage problems) and work systems (i.e. negative outcomes). This paper aims at exploring and synthesizing the consequences of usability flaws in terms of usage problems and negative outcomes on the work system. Methods A secondary analysis of 26 papers included in a prior systematic review of the usability flaws in medication alerting was performed. Usage problems and negative outcomes were extracted and sorted. Links between usability flaws, usage problems, and negative outcomes were also analyzed. Results Poor usability generates a large variety of consequences. It impacts the user from a cognitive, behavioral, emotional, and attitudinal perspective. Ultimately, usability flaws have negative consequences on the workflow, the effectiveness of the technology, the medication management process, and, more importantly, patient safety. Only few complete pathways leading from usability flaws to negative outcomes were identified. Conclusion Usability flaws in medication alerting systems impede users, and ultimately their work system, and negatively impact patient safety. Therefore, the usability dimension may act as a hidden explanatory variable that could explain, at least partly, the (absence of) intended outcomes of new technology. PMID:26123906
Grässel, E; Schirmer, B
2006-06-01
Caring for a dementia patient in the family often turns out to be a full-time job for family carers. So home visitors-for example volunteers spending time with the patient and thus offering some respite to the family-may be a very important aspect of stabilizing home care. This study investigates the expectations of volunteers concerning their training and their future voluntary work, as well as their visiting experiences, and their reasons for stopping the voluntary work. A total of 40 volunteers were interviewed three times over a 18 month period. The interviews were based on interview guidelines and were problem-centered. The interviewees' replies were subject to a summarizing qualitative content analysis. Of the study participants 85% were women, 48% had previously been family carers themselves, and 50% had previous experience of other voluntary work. Their wish "to do something useful" and "to learn more about dementia" were the main reasons for participation in voluntary work. The interviewed persons tend to learn most about communicating with dementia patients through case studies and practical exercises. Work pressures or restarting employment were the most common reasons to stop the voluntary work. Only if the volunteers are supported by professionals--particularly in the form of a contact person who is always available when problems occur--can this type of respite for family carers be maintained.
[Factors associated with work-related accidents in the informal commercial sector].
Rios, Marcela Andrade; Nery, Adriana Alves; Rios, Polianna Alves Andrade; Casotti, Cezar Augusto; Cardoso, Jefferson Paixão
2015-06-01
This study aimed to estimate the incidence of non-fatal work-related accidents in the informal commercial sector and analyze associated socio-demographic, occupational, workplace, and health factors, in a cross-sectional survey of 434 workers in the business district of Jequié, Bahia State, Brazil, in 2013. Logistic regression was used to assess factors associated with accidents. Incidence of accidents in the previous 12 months was estimated at 32.3%, and multivariate analysis showed higher odds of accidents in male sex workers (OR = 1.61), young individuals (OR = 4.62), meat or poultry workers (OR = 9.55), and workers performing heavy physical work (OR = 1.71). The results show the need for public policies to prevent accidents in the informal commercial sector.
Analysis of bathymetric surveys to identify coastal vulnerabilities at Cape Canaveral, Florida
Thompson, David M.; Plant, Nathaniel G.; Hansen, Mark E.
2015-10-07
The purpose of this work is to describe an updated bathymetric dataset collected in 2014 and compare it to previous datasets. The updated data focus on the bathymetric features and sediment transport pathways that connect the offshore regions to the shoreline and, therefore, are related to the protection of other portions of the coastal environment, such as dunes, that support infrastructure and ecosystems. Previous survey data include National Oceanic and Atmospheric Administration’s (NOAA) National Ocean Service (NOS) hydrographic survey from 1956 and a USGS survey from 2010 that is augmented with NOS surveys from 2006 and 2007. The primary result of this analysis is documentation and quantification of the nature and rates of bathymetric changes that are near (within about 2.5 km) the current Cape Canaveral shoreline and interpretation of the impact of these changes on future erosion vulnerability.
Extracting Cross-Ontology Weighted Association Rules from Gene Ontology Annotations.
Agapito, Giuseppe; Milano, Marianna; Guzzi, Pietro Hiram; Cannataro, Mario
2016-01-01
Gene Ontology (GO) is a structured repository of concepts (GO Terms) that are associated to one or more gene products through a process referred to as annotation. The analysis of annotated data is an important opportunity for bioinformatics. There are different approaches of analysis, among those, the use of association rules (AR) which provides useful knowledge, discovering biologically relevant associations between terms of GO, not previously known. In a previous work, we introduced GO-WAR (Gene Ontology-based Weighted Association Rules), a methodology for extracting weighted association rules from ontology-based annotated datasets. We here adapt the GO-WAR algorithm to mine cross-ontology association rules, i.e., rules that involve GO terms present in the three sub-ontologies of GO. We conduct a deep performance evaluation of GO-WAR by mining publicly available GO annotated datasets, showing how GO-WAR outperforms current state of the art approaches.
Stress and psychiatric disorder in healthcare professionals and hospital staff.
Weinberg, A; Creed, F
2000-02-12
Previous studies of stress in healthcare staff have indicated a probable high prevalence of distress. Whether this distress can be attributed to the stressful nature of the work situation is not clear. No previous study has used a detailed interview method to ascertain the link between stress in and outside of work and anxiety and depressive disorders. Doctors, nurses, and administrative and ancillary staff were screened using the general health questionnaire (GHQ). High scorers (GHQ>4) and matched individuals with low GHQ scores were interviewed by means of the clinical interview schedule to ascertain definite anxiety and depressive disorders (cases). Cases and controls, matched for age, sex, and occupational group were interviewed with the life events and difficulties schedule classification and an objective measure of work stress to find out the amount of stress at work and outside of work. Sociodemographic and stress variables were entered into a logistic-regression analysis to find out the variables associated with anxiety and depressive disorders. 64 cases and 64 controls were matched. Cases and controls did not differ on demographic variables but cases were less likely to have a confidant (odds ratio 0.09 [95% CI 0.01-0.79]) and more likely to have had a previous episode of psychiatric disorder (3.07 [1.10-8.57]). Cases and controls worked similar hours and had similar responsibility but cases had a greater number of objective stressful situations both in and out of work (severe event or substantial difficulty in and out of work-45 cases vs 18 controls 6.05 [2.81-13.00], p<0.001; severe chronic difficulty outside of work-27 vs 8, 5.12 [2.09-12.46], p<0.001). Cases had significantly more objective work problems than controls (median 6 vs 4, z=3.81, p<0.001). The logistic-regression analyses indicated that even after the effects of personal vulnerability to psychiatric disorder and ongoing social stress outside of work had been taken into account, stressful situations at work contributed to anxiety and depressive disorders. Both stress at work and outside of work contribute to the anxiety and depressive disorders experienced by healthcare staff. Our findings suggest that the best way to decrease the prevalence of these disorders is individual treatment, which may focus on personal difficulties outside of work, combined with organisational attempts to reduce work stress. The latter may involve more assistance for staff who have a conflict between their managerial role and clinical role.
Model of the best-of-N nest-site selection process in honeybees.
Reina, Andreagiovanni; Marshall, James A R; Trianni, Vito; Bose, Thomas
2017-05-01
The ability of a honeybee swarm to select the best nest site plays a fundamental role in determining the future colony's fitness. To date, the nest-site selection process has mostly been modeled and theoretically analyzed for the case of binary decisions. However, when the number of alternative nests is larger than two, the decision-process dynamics qualitatively change. In this work, we extend previous analyses of a value-sensitive decision-making mechanism to a decision process among N nests. First, we present the decision-making dynamics in the symmetric case of N equal-quality nests. Then, we generalize our findings to a best-of-N decision scenario with one superior nest and N-1 inferior nests, previously studied empirically in bees and ants. Whereas previous binary models highlighted the crucial role of inhibitory stop-signaling, the key parameter in our new analysis is the relative time invested by swarm members in individual discovery and in signaling behaviors. Our new analysis reveals conflicting pressures on this ratio in symmetric and best-of-N decisions, which could be solved through a time-dependent signaling strategy. Additionally, our analysis suggests how ecological factors determining the density of suitable nest sites may have led to selective pressures for an optimal stable signaling ratio.
Model of the best-of-N nest-site selection process in honeybees
NASA Astrophysics Data System (ADS)
Reina, Andreagiovanni; Marshall, James A. R.; Trianni, Vito; Bose, Thomas
2017-05-01
The ability of a honeybee swarm to select the best nest site plays a fundamental role in determining the future colony's fitness. To date, the nest-site selection process has mostly been modeled and theoretically analyzed for the case of binary decisions. However, when the number of alternative nests is larger than two, the decision-process dynamics qualitatively change. In this work, we extend previous analyses of a value-sensitive decision-making mechanism to a decision process among N nests. First, we present the decision-making dynamics in the symmetric case of N equal-quality nests. Then, we generalize our findings to a best-of-N decision scenario with one superior nest and N -1 inferior nests, previously studied empirically in bees and ants. Whereas previous binary models highlighted the crucial role of inhibitory stop-signaling, the key parameter in our new analysis is the relative time invested by swarm members in individual discovery and in signaling behaviors. Our new analysis reveals conflicting pressures on this ratio in symmetric and best-of-N decisions, which could be solved through a time-dependent signaling strategy. Additionally, our analysis suggests how ecological factors determining the density of suitable nest sites may have led to selective pressures for an optimal stable signaling ratio.
Carlini, Luigi; Fidenzi, Luca; Gualtieri, Giacomo; Nucci, Giulia; Fagiolini, Andrea; Coluccia, Anna; Gabbrielli, Mario
2016-01-01
After a survey of the definition and etiopathogenesis of burnout syndrome (BOS) carried out with the support of the most reliable available literature on the subject, the essay focuses on clinical evaluation (psychometric identification and quantification) of burn-out. In accordance with Circular 71/2003 of INAIL, it is assumed to be essential both legally and scientifically knowledge that the syndrome of burnout, knowledge, which involves an analysis of the case conducted with objective strictness and critical sensibility. It is carried out by collecting data on work history, physiological history, remote and proximal pathological history and performing a physical examination including neuro-psychiatric and psycho-diagnostic tests surveys. Only after the ascertainment of an effective existence of a psychiatric syndrome related to burnout phenomenon indeed, it will be possible (and necessary) to quantify the period of illness and the potential temporary biological damage or, more rarely, a permanent one. Given the difficulty of applying the forensic methodology to BOS (among which: the evaluation of the previous state of the person, the assessment of the causal link, the difficulties of nosographic of mental illness, the near impossibility of adequate prognostic evaluation, the difficulty to identify suitable criteria for establishing the importance and nature of limitations of daily living), in order to quantify the damage as objective as possible, it will be necessary to: 1) reconstruct the previous mental state of the subject; 2) assess the psychopathological condition following the event which the action of recognition focuses on; 3) express the clinical severity graduation judgment of the framework as well as a prognosis regarding the mental disorder found. The second part of the analysis focuses on the relationship between BOS and "helping profession"; specific attention is paid, in this section of work, to the analysis of the relationship between a typical BOS work-related stress and suicide.
Tuckett, Anthony; Parker, Deborah; Eley, Robert M; Hegney, Desley
2009-12-01
Aim. The aim of this qualitative analysis - a component of a larger survey study, was to provide insights and understandings about intrinsic and extrinsic work values for nurses in aged-care. Background. Intrinsic and extrinsic work values impact on nurses' job satisfaction and ultimately nursing retention. This study contributes further to knowledge development in this area by building on a previous work values study in aged-care nursing. Methods. This paper presents the qualitative research findings from the final open-ended question from a survey of nurses employed in the aged-care sector in the State of Queensland, Australia in 2007. Data from a cohort of 105 aged care sector nurses was analysed relying on deductive content analysis. Findings. Two intrinsic work values emerged - low morale and images of nursing and two extrinsic work values emerged - remuneration and working conditions. The work value 'working conditions' comprised four aspects of aged-care work, specifically staff turnover, workplace violence, care team membership specifically the Assistants-in-Nursing and paperwork. A single social workplace value 'support by management' is discussed as identified as important to these nurses. Conclusion. Qualitative insights into aged-care nurses' intrinsic and extrinsic work values suggest that work satisfaction is low. Workforce policy makers and employers of nurses in aged-care need to comprehend the relationship between job satisfaction, retention and work values. Relevance to clinical practice. These findings have implications for recruitment, retention and workforce planning within the aged-care environment. © 2009 Blackwell Publishing Ltd.
AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT
DOE Office of Scientific and Technical Information (OSTI.GOV)
Potts, T. Todd; Hylko, James M.; Douglas, Terence A.
2003-02-27
WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHAmore » then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment controls in the field.« less
A Meta-Analysis of the Relationship between Trait Mindfulness and Substance Use Behaviors
Karyadi, Kenny A.; VanderVeen, J. Davis; Cyders, Melissa A.
2014-01-01
Background The relationship between trait mindfulness and substance use behaviors has been inconsistent across studies. The current study is a meta-analysis aimed at quantifying the magnitude of this relationship, and at determining how this relationship varies in context of (1) mindfulness facets, (2) substance type, (3) sample characteristics, and (4) substance use severity. Methods A literature search was conducted using electronic databases. The literature search yielded 303 articles, but only 39 articles met inclusion criteria to be included in this meta-analysis. The relationship was quantified as a Pearson's r correlation coefficient for all studies. Results Findings indicated a small, negative, and significant relationship between trait mindfulness and substance use behaviors (r = -0.13). This relationship varied across substance type, clinical status of the sample, and substance use severity. Although not significant, relationship sizes showed different patterns across mindfulness facets. Conclusions This meta-analysis quantified the relationship between trait mindfulness and substance use behaviors, which can be used as future effect size estimates. Findings also clarify inconsistency in previous work by indicating that the trait mindfulness-substance use behaviors relationship was more robust: (1) for alcohol use and tobacco use behaviors; (2) for problematic substance use behaviors; and (3) with inpatient clinical samples. Further work should continue to examine if acting with awareness, non-judgment, and non-reactivity mindfulness facets are more robustly associated with substance use behaviors. Failure to consider these factors, or collapsing across these factors, could explain the smaller or inconsistently reported associations across previous studies. PMID:25113434
Qvirist, Linnea A.; De Filippo, Carlotta; Strati, Francesco; Stefanini, Irene; Sordo, Maddalena; Andlid, Thomas; Felis, Giovanna E.; Mattarelli, Paola; Cavalieri, Duccio
2016-01-01
The geographically isolated region of the Yaghnob Valley, Tajikistan, has allowed its inhabitants to maintain a unique culture and lifestyle. Their fermented goat milk constitutes one of the staple foods for the Yaghnob population, and is produced by backslopping, i.e., using the previous fermentation batch to inoculate the new one. This study addresses the yeast composition of the fermented milk, assessing genotypic, and phenotypic properties. The 52 isolates included in this study revealed small species diversity, belonging to Kluyveromyces marxianus, Pichia fermentans, Saccharomyces cerevisiae, and one Kazachstania unispora. The K. marxianus strains showed two different genotypes, one of which never described previously. The two genetically different groups also differed significantly in several phenotypic characteristics, such as tolerance toward high temperatures, low pH, and presence of acid. Microsatellite analysis of the S. cerevisiae strains from this study, compared to 350 previously described strains, attributed the Yaghnobi S. cerevisiae to two different ancestry origins, both distinct from the wine and beer strains, and similar to strains isolated from human and insects feces, suggesting a peculiar origin of these strains, and the existence of a gut reservoir for S. cerevisiae. Our work constitutes a foundation for strain selection for future applications as starter cultures in food fermentations. This work is the first ever on yeast diversity from fermented milk of the previously unexplored area of the Yaghnob Valley. PMID:27857705
Clark, William C; Tomich, Thomas P; van Noordwijk, Meine; Guston, David; Catacutan, Delia; Dickson, Nancy M; McNie, Elizabeth
2016-04-26
Previous research on the determinants of effectiveness in knowledge systems seeking to support sustainable development has highlighted the importance of "boundary work" through which research communities organize their relations with new science, other sources of knowledge, and the worlds of action and policymaking. A growing body of scholarship postulates specific attributes of boundary work that promote used and useful research. These propositions, however, are largely based on the experience of a few industrialized countries. We report here on an effort to evaluate their relevance for efforts to harness science in support of sustainability in the developing world. We carried out a multicountry comparative analysis of natural resource management programs conducted under the auspices of the Consultative Group on International Agricultural Research. We discovered six distinctive kinds of boundary work contributing to the successes of those programs-a greater variety than has been documented in previous studies. We argue that these different kinds of boundary work can be understood as a dual response to the different uses for which the results of specific research programs are intended, and the different sources of knowledge drawn on by those programs. We show that these distinctive kinds of boundary work require distinctive strategies to organize them effectively. Especially important are arrangements regarding participation of stakeholders, accountability in governance, and the use of "boundary objects." We conclude that improving the ability of research programs to produce useful knowledge for sustainable development will require both greater and differentiated support for multiple forms of boundary work.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tralshawala, Nilesh; Howard, Don; Knight, Bryon
2008-02-28
In conventional infrared thermography, determination of thermal diffusivity requires thickness information. Recently GE has been experimenting with the use of lateral heat flow to determine thermal diffusivity without thickness information. This work builds on previous work at NASA Langley and Wayne State University but we incorporate thermal time of flight (tof) analysis rather than curve fitting to obtain quantitative information. We have developed appropriate theoretical models and a tof based data analysis framework to experimentally determine all components of thermal diffusivity from the time-temperature measurements. Initial validation was carried out using finite difference simulations. Experimental validation was done using anisotropicmore » carbon fiber reinforced polymer (CFRP) composites. We found that in the CFRP samples used, the in-plane component of diffusivity is about eight times larger than the through-thickness component.« less
The Role of Datasets on Scientific Influence within Conflict Research
Van Holt, Tracy; Johnson, Jeffery C.; Moates, Shiloh; Carley, Kathleen M.
2016-01-01
We inductively tested if a coherent field of inquiry in human conflict research emerged in an analysis of published research involving “conflict” in the Web of Science (WoS) over a 66-year period (1945–2011). We created a citation network that linked the 62,504 WoS records and their cited literature. We performed a critical path analysis (CPA), a specialized social network analysis on this citation network (~1.5 million works), to highlight the main contributions in conflict research and to test if research on conflict has in fact evolved to represent a coherent field of inquiry. Out of this vast dataset, 49 academic works were highlighted by the CPA suggesting a coherent field of inquiry; which means that researchers in the field acknowledge seminal contributions and share a common knowledge base. Other conflict concepts that were also analyzed—such as interpersonal conflict or conflict among pharmaceuticals, for example, did not form their own CP. A single path formed, meaning that there was a cohesive set of ideas that built upon previous research. This is in contrast to a main path analysis of conflict from 1957–1971 where ideas didn’t persist in that multiple paths existed and died or emerged reflecting lack of scientific coherence (Carley, Hummon, and Harty, 1993). The critical path consisted of a number of key features: 1) Concepts that built throughout include the notion that resource availability drives conflict, which emerged in the 1960s-1990s and continued on until 2011. More recent intrastate studies that focused on inequalities emerged from interstate studies on the democracy of peace earlier on the path. 2) Recent research on the path focused on forecasting conflict, which depends on well-developed metrics and theories to model. 3) We used keyword analysis to independently show how the CP was topically linked (i.e., through democracy, modeling, resources, and geography). Publically available conflict datasets developed early on helped shape the operationalization of conflict. In fact, 94% of the works on the CP that analyzed data either relied on publically available datasets, or they generated a dataset and made it public. These datasets appear to be important in the development of conflict research, allowing for cross-case comparisons, and comparisons to previous works. PMID:27124569
The Role of Datasets on Scientific Influence within Conflict Research.
Van Holt, Tracy; Johnson, Jeffery C; Moates, Shiloh; Carley, Kathleen M
2016-01-01
We inductively tested if a coherent field of inquiry in human conflict research emerged in an analysis of published research involving "conflict" in the Web of Science (WoS) over a 66-year period (1945-2011). We created a citation network that linked the 62,504 WoS records and their cited literature. We performed a critical path analysis (CPA), a specialized social network analysis on this citation network (~1.5 million works), to highlight the main contributions in conflict research and to test if research on conflict has in fact evolved to represent a coherent field of inquiry. Out of this vast dataset, 49 academic works were highlighted by the CPA suggesting a coherent field of inquiry; which means that researchers in the field acknowledge seminal contributions and share a common knowledge base. Other conflict concepts that were also analyzed-such as interpersonal conflict or conflict among pharmaceuticals, for example, did not form their own CP. A single path formed, meaning that there was a cohesive set of ideas that built upon previous research. This is in contrast to a main path analysis of conflict from 1957-1971 where ideas didn't persist in that multiple paths existed and died or emerged reflecting lack of scientific coherence (Carley, Hummon, and Harty, 1993). The critical path consisted of a number of key features: 1) Concepts that built throughout include the notion that resource availability drives conflict, which emerged in the 1960s-1990s and continued on until 2011. More recent intrastate studies that focused on inequalities emerged from interstate studies on the democracy of peace earlier on the path. 2) Recent research on the path focused on forecasting conflict, which depends on well-developed metrics and theories to model. 3) We used keyword analysis to independently show how the CP was topically linked (i.e., through democracy, modeling, resources, and geography). Publically available conflict datasets developed early on helped shape the operationalization of conflict. In fact, 94% of the works on the CP that analyzed data either relied on publically available datasets, or they generated a dataset and made it public. These datasets appear to be important in the development of conflict research, allowing for cross-case comparisons, and comparisons to previous works.
2014-04-01
13. SUPPLEMENTARY NOTES Author’s email: grace.d.metcalfe.civ@mail.mil 14. ABSTRACT Polarimetry is the analysis of the polarization state of...been virtually no polarimetry work at terahertz (THz) frequencies because, until recently, it has been difficult to create components to control the...develop the essential components such that THz polarimetry may enhance the ability to study previously unexploited spectral responses in the THz
Development of High-Speed IV-VI Photodiodes
1976-06-01
is not yet an adequate theoretical analysis. However, early experimental results indicated that collection efficienclea near unitv are attainable...82171~$* te g w w ( I .f 1 INTRODUCTION 2 EXPERIMENTAL 3 JUNCTION CAPACITANCE 4 THE PINCHED-OFF PHOTODIODE 4.1 Genaral Considerations 4.2...developed by Ford Research Staff. The essential references to this previous work and to new experimental detVKji are given In Section 2 of the
Triggered and Untriggered Searches for GRB Optical Bursts with ROTSE
NASA Astrophysics Data System (ADS)
Kehoe, R.; Akerlof, C.; Lee, B.; McKay, T.; Rykoff, E.; Marshall, S.; Bloch, J.; Casperson, D.; Gisler, G.; Szymanski, J.; Wren, J.
2000-12-01
The ROTSE project is dedicated to the observation of early optical emission from gamma-ray bursts. We have pursued this goal both by analysis of data taken from satellite-derived triggers via GCN, as well as through the study of untriggered data. Recent work now permits us to analyze much larger fields than previously possible. We will discuss our searches for GRB optical bursts which utilize this capability.
ERIC Educational Resources Information Center
Frisch, Larry; Plessinger, Alexander
2007-01-01
Context: A small number of fatalities continue to occur due to motor vehicle crashes on highways in which at least 1 passenger vehicle (automobile, van, or small truck) is driven by a child younger than 15 years. Purpose: The purpose of this study was to extend previous work suggesting that such crashes occur frequently in the Southern states and…
NASA Technical Reports Server (NTRS)
Grossman, Robert
1991-01-01
Algorithms previously developed by the author give formulas which can be used for the efficient symbolic computation of series expansions to solutions of nonlinear systems of ordinary differential equations. As a by product of this analysis, formulas are derived which relate to trees to the coefficients of the series expansions, similar to the work of Leroux and Viennot, and Lamnabhi, Leroux and Viennot.
Broadband Scattering from Sand and Sand/Mud Sediments with Extensive Environmental Characterization
2017-01-30
experiment , extensive envi- ronmental characterization was also performed to support data/model comparisons for both experimental efforts. The site...mechanisms, potentially addressing questions left unresolved from the previous sediment acoustics experiments , SAX99 and SAX04. This work was also to provide...environmental characterization to support the analysis of data collected during the Target and Reverberation Experiment in 2013 (TREX13) as well as
Automated Generation of Fault Management Artifacts from a Simple System Model
NASA Technical Reports Server (NTRS)
Kennedy, Andrew K.; Day, John C.
2013-01-01
Our understanding of off-nominal behavior - failure modes and fault propagation - in complex systems is often based purely on engineering intuition; specific cases are assessed in an ad hoc fashion as a (fallible) fault management engineer sees fit. This work is an attempt to provide a more rigorous approach to this understanding and assessment by automating the creation of a fault management artifact, the Failure Modes and Effects Analysis (FMEA) through querying a representation of the system in a SysML model. This work builds off the previous development of an off-nominal behavior model for the upcoming Soil Moisture Active-Passive (SMAP) mission at the Jet Propulsion Laboratory. We further developed the previous system model to more fully incorporate the ideas of State Analysis, and it was restructured in an organizational hierarchy that models the system as layers of control systems while also incorporating the concept of "design authority". We present software that was developed to traverse the elements and relationships in this model to automatically construct an FMEA spreadsheet. We further discuss extending this model to automatically generate other typical fault management artifacts, such as Fault Trees, to efficiently portray system behavior, and depend less on the intuition of fault management engineers to ensure complete examination of off-nominal behavior.
Kermansaravi, Fatihe; Navidian, Ali; Navabi Rigi, Shahindokht; Yaghoubinia, Fariba
2014-10-29
Quality of work life is one of the most important factors for human motivating and improving of job satisfaction. The current study was carried out aimed to determine the relationship between quality of work life and job satisfaction in faculty members of Zahedan University of Medical Sciences. In this descriptive-analytic study, 202 faculty members of Zahedan University of Medical Sciences in 2012 were entered the study through census. The job satisfaction questionnaire of Smith and Kendall and Walton Quality of Work Life questionnaire were used for data collection. Validity and reliability of questionnaires were confirmed in previous studies. Data analysis was done using SPSS 18. The Pearson correlation coefficient and multiple regression tests were used for data analysis. The mean score of quality of work life was 121/30±37/08 and job satisfaction was 135/98 ±33/78. There was a significant and positive correlation between job satisfaction of faculty members and their quality of work life (P=0.003). In addition, two components of quality of work life "adequate and fair compensation" (β=0.3) and "Social Integration" (β=0.4) can predict job satisfaction of faculty members. According to correlation between job satisfaction and quality of work life in faculty members, job satisfaction can be improved through the changing and manipulating the components of quality of work life and in this way; the suitable environment for organization development should be provided.
Return to work outcomes for workers with mental health conditions: A retrospective cohort study.
Prang, Khic-Houy; Bohensky, Megan; Smith, Peter; Collie, Alex
2016-01-01
The aims of this study were to describe predictors of sustained return to work (RTW) among a cohort of workers with compensated work-related mental health conditions (MHCs); and to examine predictors of subsequent absences due to the same condition. This study was a retrospective analysis of compensation claims data in Victoria, Australia. We selected workers with an accepted wage replacement claim due to a work-related MHC from 1 January 2002 to 31 December 2009, with two years of follow-up data. We identified 8358 workers meeting our inclusion criteria. The median age of workers was 44 years (Interquartile range (IQR): 36-51) and 56% were female. In a multivariable Cox regression analysis, older age, being from a small organisation, working in some specific industry segments, consulting a psychiatrist or psychologist, using medications, and having a previous claim were all associated with a delayed RTW. Workers experiencing work pressure, assault/workplace violence or other mental stress factors, working in the public administration and safety industry and having a medical incapacity certification between 3-4 days and 5-7 days had a higher rate of multiple RTW attempts. This study identified a number of risk factors associated with a delayed RTW and multiple attempts at RTW. Predictors may help identify high-risk groups and facilitate the RTW process of workers with MHCs. Copyright © 2015 Elsevier Ltd. All rights reserved.
Understanding visualization: a formal approach using category theory and semiotics.
Vickers, Paul; Faith, Joe; Rossiter, Nick
2013-06-01
This paper combines the vocabulary of semiotics and category theory to provide a formal analysis of visualization. It shows how familiar processes of visualization fit the semiotic frameworks of both Saussure and Peirce, and extends these structures using the tools of category theory to provide a general framework for understanding visualization in practice, including: Relationships between systems, data collected from those systems, renderings of those data in the form of representations, the reading of those representations to create visualizations, and the use of those visualizations to create knowledge and understanding of the system under inspection. The resulting framework is validated by demonstrating how familiar information visualization concepts (such as literalness, sensitivity, redundancy, ambiguity, generalizability, and chart junk) arise naturally from it and can be defined formally and precisely. This paper generalizes previous work on the formal characterization of visualization by, inter alia, Ziemkiewicz and Kosara and allows us to formally distinguish properties of the visualization process that previous work does not.
Performance analysis of the toroidal field ITER production conductors
NASA Astrophysics Data System (ADS)
Breschi, M.; Macioce, D.; Devred, A.
2017-05-01
The production of the superconducting cables for the toroidal field (TF) magnets of the ITER machine has recently been completed at the manufacturing companies selected during the previous qualification phase. The quality assurance/quality control programs that have been implemented to ensure production uniformity across numerous suppliers include performance tests of several conductor samples from selected unit lengths. The short full-size samples (4 m long) were subjected to DC and AC tests in the SULTAN facility at CRPP in Villigen, Switzerland. In a previous work the results of the tests of the conductor performance qualification samples were reported. This work reports the analyses of the results of the tests of the production conductor samples. The results reported here concern the values of current sharing temperature, critical current, effective strain and n-value from the DC tests and the energy dissipated per cycle from the AC loss tests. A detailed comparison is also presented between the performance of the conductors and that of their constituting strands.
Impact of compressibility and a guide field on Fermi acceleration during magnetic island coalescence
NASA Astrophysics Data System (ADS)
Montag, Peter; Egedal, Jan; Lichko, Emily; Wetherton, Blake
2017-10-01
Previous work has shown that Fermi acceleration can be an effective heating mechanism during magnetic island coalescence, where electrons may undergo repeated reflections as the magnetic field lines contract. This energization has the potential to account for the power-law distributions of particle energy inferred from observations of solar flares. Here, we develop a generalized framework for the analysis of Fermi acceleration that can incorporate the effects of compressibility and non-uniformity along field lines, which have commonly been neglected in previous treatments of the problem. Applying this framework to the simplified case of the uniform flux tube allows us to find both the power-law scaling of the distribution function and the rate at which the power-law behavior develops. We find that a guide magnetic field of order unity effectively suppresses the development of power-law distributions. The work was supported by NASA Grant No. NNX14AC68G, NSF GEM Grant No. 1405166, NSF Award 1404166, and NASA Award NNX15AJ73G.
New graduate RN work satisfaction after completing an interactive nurse residency.
Anderson, Teresa; Linden, Lois; Allen, Marsha; Gibbs, Elizabeth
2009-04-01
The aims of this study were to measure job satisfaction and engagement perceptions of new nurses after completing interactive residency modules and to test the reliability and validity of the Halfer-Graf Job/Work Environment Nursing Satisfaction Survey. US nursing shortages are estimated to increase to 36% by 2020, requiring emphasis on hiring new graduate nurses. Improved retention of new graduates through innovative orientations such as interactive nurse residencies is one option. This mixed qualitative and quantitative study compared perceived job satisfaction and employee engagement of 90 new graduate nurses completing an interactive nurse residency. Reliability and validity of the Halfer-Graf tool were supported. Qualitative analysis yielded trends related to satisfiers (patients, patient outcomes, and teamwork) and dissatisfiers (staffing/scheduling, lack of teamwork, and physician disrespect). Simulation scenarios, debriefing, and e-mail communication with peers ranked high as beneficial teaching strategies. Study findings support previous research. An interactive learning environment was perceived as beneficial. First and second year nurse retention was consistent with previous residency programming.
New technologies for advanced three-dimensional optimum shape design in aeronautics
NASA Astrophysics Data System (ADS)
Dervieux, Alain; Lanteri, Stéphane; Malé, Jean-Michel; Marco, Nathalie; Rostaing-Schmidt, Nicole; Stoufflet, Bruno
1999-05-01
The analysis of complex flows around realistic aircraft geometries is becoming more and more predictive. In order to obtain this result, the complexity of flow analysis codes has been constantly increasing, involving more refined fluid models and sophisticated numerical methods. These codes can only run on top computers, exhausting their memory and CPU capabilities. It is, therefore, difficult to introduce best analysis codes in a shape optimization loop: most previous works in the optimum shape design field used only simplified analysis codes. Moreover, as the most popular optimization methods are the gradient-based ones, the more complex the flow solver, the more difficult it is to compute the sensitivity code. However, emerging technologies are contributing to make such an ambitious project, of including a state-of-the-art flow analysis code into an optimisation loop, feasible. Among those technologies, there are three important issues that this paper wishes to address: shape parametrization, automated differentiation and parallel computing. Shape parametrization allows faster optimization by reducing the number of design variable; in this work, it relies on a hierarchical multilevel approach. The sensitivity code can be obtained using automated differentiation. The automated approach is based on software manipulation tools, which allow the differentiation to be quick and the resulting differentiated code to be rather fast and reliable. In addition, the parallel algorithms implemented in this work allow the resulting optimization software to run on increasingly larger geometries. Copyright
Analysis of functional redundancies within the Arabidopsis TCP transcription factor family.
Danisman, Selahattin; van Dijk, Aalt D J; Bimbo, Andrea; van der Wal, Froukje; Hennig, Lars; de Folter, Stefan; Angenent, Gerco C; Immink, Richard G H
2013-12-01
Analyses of the functions of TEOSINTE-LIKE1, CYCLOIDEA, and PROLIFERATING CELL FACTOR1 (TCP) transcription factors have been hampered by functional redundancy between its individual members. In general, putative functionally redundant genes are predicted based on sequence similarity and confirmed by genetic analysis. In the TCP family, however, identification is impeded by relatively low overall sequence similarity. In a search for functionally redundant TCP pairs that control Arabidopsis leaf development, this work performed an integrative bioinformatics analysis, combining protein sequence similarities, gene expression data, and results of pair-wise protein-protein interaction studies for the 24 members of the Arabidopsis TCP transcription factor family. For this, the work completed any lacking gene expression and protein-protein interaction data experimentally and then performed a comprehensive prediction of potential functional redundant TCP pairs. Subsequently, redundant functions could be confirmed for selected predicted TCP pairs by genetic and molecular analyses. It is demonstrated that the previously uncharacterized class I TCP19 gene plays a role in the control of leaf senescence in a redundant fashion with TCP20. Altogether, this work shows the power of combining classical genetic and molecular approaches with bioinformatics predictions to unravel functional redundancies in the TCP transcription factor family.
Analysis of functional redundancies within the Arabidopsis TCP transcription factor family
Danisman, Selahattin; de Folter, Stefan; Immink, Richard G. H.
2013-01-01
Analyses of the functions of TEOSINTE-LIKE1, CYCLOIDEA, and PROLIFERATING CELL FACTOR1 (TCP) transcription factors have been hampered by functional redundancy between its individual members. In general, putative functionally redundant genes are predicted based on sequence similarity and confirmed by genetic analysis. In the TCP family, however, identification is impeded by relatively low overall sequence similarity. In a search for functionally redundant TCP pairs that control Arabidopsis leaf development, this work performed an integrative bioinformatics analysis, combining protein sequence similarities, gene expression data, and results of pair-wise protein–protein interaction studies for the 24 members of the Arabidopsis TCP transcription factor family. For this, the work completed any lacking gene expression and protein–protein interaction data experimentally and then performed a comprehensive prediction of potential functional redundant TCP pairs. Subsequently, redundant functions could be confirmed for selected predicted TCP pairs by genetic and molecular analyses. It is demonstrated that the previously uncharacterized class I TCP19 gene plays a role in the control of leaf senescence in a redundant fashion with TCP20. Altogether, this work shows the power of combining classical genetic and molecular approaches with bioinformatics predictions to unravel functional redundancies in the TCP transcription factor family. PMID:24129704
Status of Sample Return Propulsion Technology Development Under NASA's ISPT Program
NASA Technical Reports Server (NTRS)
Anderson, David J.; Glaab, Louis J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Peterson, Todd T.
2012-01-01
The In-Space Propulsion Technology (ISPT) program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. ISPT s sample return technology development areas are diverse. Sample Return Propulsion (SRP) addresses electric propulsion for sample return and low cost Discovery-class missions, propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and low technology readiness level (TRL) advanced propulsion technologies. The SRP effort continues work on HIVHAC thruster development to transition into developing a Hall-effect propulsion system for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks continues for sample return with direct applicability to a Mars Sample Return (MSR) mission with general applicability to all future planetary spacecraft. The Earth Entry Vehicle (EEV) work focuses on building a fundamental base of multi-mission technologies for Earth Entry Vehicles (MMEEV). The main focus of the Planetary Ascent Vehicles (PAV) area is technology development for the Mars Ascent Vehicle (MAV), which builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies
Graphics Processing Unit Assisted Thermographic Compositing
NASA Technical Reports Server (NTRS)
Ragasa, Scott; McDougal, Matthew; Russell, Sam
2012-01-01
Objective: To develop a software application utilizing general purpose graphics processing units (GPUs) for the analysis of large sets of thermographic data. Background: Over the past few years, an increasing effort among scientists and engineers to utilize the GPU in a more general purpose fashion is allowing for supercomputer level results at individual workstations. As data sets grow, the methods to work them grow at an equal, and often great, pace. Certain common computations can take advantage of the massively parallel and optimized hardware constructs of the GPU to allow for throughput that was previously reserved for compute clusters. These common computations have high degrees of data parallelism, that is, they are the same computation applied to a large set of data where the result does not depend on other data elements. Signal (image) processing is one area were GPUs are being used to greatly increase the performance of certain algorithms and analysis techniques. Technical Methodology/Approach: Apply massively parallel algorithms and data structures to the specific analysis requirements presented when working with thermographic data sets.
Local regression type methods applied to the study of geophysics and high frequency financial data
NASA Astrophysics Data System (ADS)
Mariani, M. C.; Basu, K.
2014-09-01
In this work we applied locally weighted scatterplot smoothing techniques (Lowess/Loess) to Geophysical and high frequency financial data. We first analyze and apply this technique to the California earthquake geological data. A spatial analysis was performed to show that the estimation of the earthquake magnitude at a fixed location is very accurate up to the relative error of 0.01%. We also applied the same method to a high frequency data set arising in the financial sector and obtained similar satisfactory results. The application of this approach to the two different data sets demonstrates that the overall method is accurate and efficient, and the Lowess approach is much more desirable than the Loess method. The previous works studied the time series analysis; in this paper our local regression models perform a spatial analysis for the geophysics data providing different information. For the high frequency data, our models estimate the curve of best fit where data are dependent on time.
Zero-moment point determination of worst-case manoeuvres leading to vehicle wheel lift
NASA Astrophysics Data System (ADS)
Lapapong, S.; Brown, A. A.; Swanson, K. S.; Brennan, S. N.
2012-01-01
This paper proposes a method to evaluate vehicle rollover propensity based on a frequency-domain representation of the zero-moment point (ZMP). Unlike other rollover metrics such as the static stability factor, which is based on the steady-state behaviour, and the load transfer ratio, which requires the calculation of tyre forces, the ZMP is based on a simplified kinematic model of the vehicle and the analysis of the contact point of the vehicle relative to the edge of the support polygon. Previous work has validated the use of the ZMP experimentally in its ability to predict wheel lift in the time domain. This work explores the use of the ZMP in the frequency domain to allow a chassis designer to understand how operating conditions and vehicle parameters affect rollover propensity. The ZMP analysis is then extended to calculate worst-case sinusoidal manoeuvres that lead to untripped wheel lift, and the analysis is tested across several vehicle configurations and compared with that of the standard Toyota J manoeuvre.
NASA Astrophysics Data System (ADS)
Armando, Alessandro; Giunchiglia, Enrico; Ponta, Serena Elisa
We present an approach to the formal specification and automatic analysis of business processes under authorization constraints based on the action language \\cal{C}. The use of \\cal{C} allows for a natural and concise modeling of the business process and the associated security policy and for the automatic analysis of the resulting specification by using the Causal Calculator (CCALC). Our approach improves upon previous work by greatly simplifying the specification step while retaining the ability to perform a fully automatic analysis. To illustrate the effectiveness of the approach we describe its application to a version of a business process taken from the banking domain and use CCALC to determine resource allocation plans complying with the security policy.
Bifurcation analysis of a heterogeneous traffic flow model
NASA Astrophysics Data System (ADS)
Wang, Yu-Qing; Yan, Bo-Wen; Zhou, Chao-Fan; Li, Wei-Kang; Jia, Bin
2018-03-01
In this work, a heterogeneous traffic flow model coupled with the periodic boundary condition is proposed. Based on the previous models, a heterogeneous system composed of more than one kind of vehicles is considered. By bifurcation analysis, bifurcation patterns of the heterogeneous system are discussed in three situations in detail and illustrated by diagrams of bifurcation patterns. Besides, the stability analysis of the heterogeneous system is performed to test its anti-interference ability. The relationship between the number of vehicles and the stability is obtained. Furthermore, the attractor analysis is applied to investigate the nature of the heterogeneous system near its steady-state neighborhood. Phase diagrams of the process of the heterogeneous system from initial state to equilibrium state are intuitively presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Aab, A.; Abreu, P.; Andringa, S.
2017-06-01
We report a multi-resolution search for anisotropies in the arrival directions of cosmic rays detected at the Pierre Auger Observatory with local zenith angles up to 80{sup o} and energies in excess of 4 EeV (4 × 10{sup 18} eV). This search is conducted by measuring the angular power spectrum and performing a needlet wavelet analysis in two independent energy ranges. Both analyses are complementary since the angular power spectrum achieves a better performance in identifying large-scale patterns while the needlet wavelet analysis, considering the parameters used in this work, presents a higher efficiency in detecting smaller-scale anisotropies, potentially providingmore » directional information on any observed anisotropies. No deviation from isotropy is observed on any angular scale in the energy range between 4 and 8 EeV. Above 8 EeV, an indication for a dipole moment is captured; while no other deviation from isotropy is observed for moments beyond the dipole one. The corresponding p -values obtained after accounting for searches blindly performed at several angular scales, are 1.3 × 10{sup −5} in the case of the angular power spectrum, and 2.5 × 10{sup −3} in the case of the needlet analysis. While these results are consistent with previous reports making use of the same data set, they provide extensions of the previous works through the thorough scans of the angular scales.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Aab, A.; Abreu, P.; Aglietta, M.
We report a multi-resolution search for anisotropies in the arrival directions of cosmic rays detected at the Pierre Auger Observatory with local zenith angles up to 80(o) and energies in excess of 4 EeV (4 × 10 18 eV). This search is conducted by measuring the angular power spectrum and performing a needlet wavelet analysis in two independent energy ranges. Both analyses are complementary since the angular power spectrum achieves a better performance in identifying large-scale patterns while the needlet wavelet analysis, considering the parameters used in this work, presents a higher efficiency in detecting smaller-scale anisotropies, potentially providing directional information onmore » any observed anisotropies. No deviation from isotropy is observed on any angular scale in the energy range between 4 and 8 EeV. Above 8 EeV, an indication for a dipole moment is captured, while no other deviation from isotropy is observed for moments beyond the dipole one. The corresponding p-values obtained after accounting for searches blindly performed at several angular scales, are 1.3 × 10 -5 in the case of the angular power spectrum, and 2.5 × 10 -3 in the case of the needlet analysis. While these results are consistent with previous reports making use of the same data set, they provide extensions of the previous works through the thorough scans of the angular scales.« less
Hornung, Severin; Glaser, Jürgen
2009-04-01
Building on previous research, further evidence for the potential of home-based telecommuting as an employee-oriented human resource practice is provided from a study in the German public administration. Survey data from 1,008 public employees were analyzed using structural equation modeling. Mean age of the sample was 43.6 yr. (SD = 8.8 yr.), and 27.5% (277) of the participants were women. Analysis supported the roles of higher Autonomy and lower Work-Family Conflict as psychological mediators between Telecommunication Intensity and both Job Satisfaction and Quality of Life. Implications for the design of flexible working arrangements are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chakraborty, Pritam; Sabharwall, Piyush; Spears, Robert Edward
2015-09-30
The objective of this work is to understand the integrity of Used Nuclear Fuel (UNF) during transportation. Previous analysis work has been performed to look at the integrity of UNF during transportation but these analyses have neglected to analyze the effect of hydrides and flaws (fracture mechanics models to capture radial cracking in the cladding). In this study, the clad regions of interest are near the pellet-pellet interfaces. These regions can experience more complex stress-states than the rest of the clad during cooling and have a greater possibility to develop radially reoriented hydrides during vacuum drying.
A lung sound classification system based on the rational dilation wavelet transform.
Ulukaya, Sezer; Serbes, Gorkem; Sen, Ipek; Kahya, Yasemin P
2016-08-01
In this work, a wavelet based classification system that aims to discriminate crackle, normal and wheeze lung sounds is presented. While the previous works related with this problem use constant low Q-factor wavelets, which have limited frequency resolution and can not cope with oscillatory signals, in the proposed system, the Rational Dilation Wavelet Transform, whose Q-factors can be tuned, is employed. Proposed system yields an accuracy of 95 % for crackle, 97 % for wheeze, 93.50 % for normal and 95.17 % for total sound signal types using energy feature subset and proposed approach is superior to conventional low Q-factor wavelet analysis.
Agarwal, A.; Lasenby, J.
2017-01-01
We present a novel application of rotors in geometric algebra to represent the change of curvature tensor that is used in shell theory as part of the constitutive law. We introduce a new decomposition of the change of curvature tensor, which has explicit terms for changes of curvature due to initial curvature combined with strain, and changes in rotation over the surface. We use this decomposition to perform a scaling analysis of the relative importance of bending and stretching in flexible tubes undergoing self-excited oscillations. These oscillations have relevance to the lung, in which it is believed that they are responsible for wheezing. The new analysis is necessitated by the fact that the working fluid is air, compared to water in most previous work. We use stereographic imaging to empirically measure the relative importance of bending and stretching energy in observed self-excited oscillations. This enables us to validate our scaling analysis. We show that bending energy is dominated by stretching energy, and the scaling analysis makes clear that this will remain true for tubes in the airways of the lung. PMID:29291106
Gregory, A L; Agarwal, A; Lasenby, J
2017-11-01
We present a novel application of rotors in geometric algebra to represent the change of curvature tensor that is used in shell theory as part of the constitutive law. We introduce a new decomposition of the change of curvature tensor, which has explicit terms for changes of curvature due to initial curvature combined with strain, and changes in rotation over the surface. We use this decomposition to perform a scaling analysis of the relative importance of bending and stretching in flexible tubes undergoing self-excited oscillations. These oscillations have relevance to the lung, in which it is believed that they are responsible for wheezing. The new analysis is necessitated by the fact that the working fluid is air, compared to water in most previous work. We use stereographic imaging to empirically measure the relative importance of bending and stretching energy in observed self-excited oscillations. This enables us to validate our scaling analysis. We show that bending energy is dominated by stretching energy, and the scaling analysis makes clear that this will remain true for tubes in the airways of the lung.
[Job stressors in software developers--a comparison with other occupations].
Kadokura, M
1997-09-01
The aim of this study is to investigate the difference in job stressors among software developers, the sales staff and the clerical staff (n = 2,079) in two companies (A Co. and B Co.) using a self-administered questionnaire that included a job stressor scale and the 30-item General Health Questionnaire (GHQ). We developed the job stressor scale based on the interviews with out-patients who engaged in software development and previous studies about job stressors. Factor analysis with a seven-factor solution showed that seven subscales were abstracted from the job stressor scale, namely, quantitative load of work, dissatisfaction with work, demanding work, uneasiness about work, human relations, ambiguity of work and shortage of private time. Each subscale was significantly (r = .313-.442, p < 0.0001) correlated with the GHQ score and proved to be a reliable instrument, as indicated by a Cronbach's alpha of greater than 0.73. Stepwise multiple regression analysis revealed that quantitative load of work and shortage of private time subscale scores were significantly high in software developers in A Co. Software developers in A Co. tended to score higher (P < .10) than the others in demanding work and ambiguity of work subscale. All subscale scores were significantly low in the clerical staff in B Co. There was no significant difference between the sales staff and software developers in B Co. Results of the interviews with out-patients showed that demanding work, hard deadline, ambiguity of work and precarious work would cause trouble in software developers. The implications of these findings with respect to occupational issues related to software developers are discussed.
Elwér, Sofia; Johansson, Klara; Hammarström, Anne
2014-03-10
Health consequences of the gender segregated labour market have previously been demonstrated in the light of gender composition of occupations and workplaces, with somewhat mixed results. Associations between the gender composition and health status have been suggested to be shaped by the psychosocial work environment. The present study aims to analyse how workplace gender composition is related to psychological distress and to explore the importance of the psychosocial work environment for psychological distress at workplaces with different gender compositions. The study population consisted of participants from the Northern Swedish Cohort with a registered workplace in 2007 when the participants were 42 years old (N=795). Questionnaire data were supplemented with register data on the gender composition of the participants' workplaces divided into three groups: workplaces with more women, mixed workplaces, and workplaces with more men. Associations between psychological distress and gender composition were analysed with multivariate logistic regression analysis adjusting for socioeconomic position, previous psychological distress, psychosocial work environment factors and gender. Logistic regression analyses (including interaction terms for gender composition and each work environment factor) were also used to assess differential associations between psychosocial work factor and psychological distress according to gender composition. Working at workplaces with a mixed gender composition was related to a higher likelihood of psychological distress compared to workplaces with more men, after adjustments for socioeconomic position, psychological distress at age 21, psychosocial work environment factors and gender. Psychosocial work environment factors did not explain the association between gender composition and psychological distress. The association between gender composition and psychological distress cannot be explained by differences in the perception of the psychosocial work environment and thus the work environment hypothesis is not supported. Workplaces with a mixed gender composition needs further research attention to explain the negative development of psychological distress during working life for both women and men at these workplaces.
2014-01-01
Background Health consequences of the gender segregated labour market have previously been demonstrated in the light of gender composition of occupations and workplaces, with somewhat mixed results. Associations between the gender composition and health status have been suggested to be shaped by the psychosocial work environment. The present study aims to analyse how workplace gender composition is related to psychological distress and to explore the importance of the psychosocial work environment for psychological distress at workplaces with different gender compositions. Methods The study population consisted of participants from the Northern Swedish Cohort with a registered workplace in 2007 when the participants were 42 years old (N = 795). Questionnaire data were supplemented with register data on the gender composition of the participants’ workplaces divided into three groups: workplaces with more women, mixed workplaces, and workplaces with more men. Associations between psychological distress and gender composition were analysed with multivariate logistic regression analysis adjusting for socioeconomic position, previous psychological distress, psychosocial work environment factors and gender. Logistic regression analyses (including interaction terms for gender composition and each work environment factor) were also used to assess differential associations between psychosocial work factor and psychological distress according to gender composition. Results Working at workplaces with a mixed gender composition was related to a higher likelihood of psychological distress compared to workplaces with more men, after adjustments for socioeconomic position, psychological distress at age 21, psychosocial work environment factors and gender. Psychosocial work environment factors did not explain the association between gender composition and psychological distress. Conclusions The association between gender composition and psychological distress cannot be explained by differences in the perception of the psychosocial work environment and thus the work environment hypothesis is not supported. Workplaces with a mixed gender composition needs further research attention to explain the negative development of psychological distress during working life for both women and men at these workplaces. PMID:24612791
Low energy e-Ar momentum transfer cross-section
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brennan, M.J.
1992-12-01
Recent work has shown that solutions of the Boltzmann equation which use the so called {open_quotes}two-term{close_quotes} approximation provide an inadequate description of the transverse diffusion of electrons in argon gas at low values of E/N, contrary to earlier evidence. Previous determinations of the momentum transfer cross section for argon from the analysis of transport data have used two-term codes in good faith. Progress towards the determination of a new cross section in the energy range O - 4 eV, including an analysis of the energy dependence of the uncertainty in the derived cross section is reported.
Large and Small Magellanic Clouds age-metallicity relationships
NASA Astrophysics Data System (ADS)
Perren, G. I.; Piatti, A. E.; Vázquez, R. A.
2017-10-01
We present a new determination of the age-metallicity relation for both Magellanic Clouds, estimated through the homogeneous analysis of 239 observed star clusters. All clusters in our set were observed with the filters of the Washington photometric system. The Automated Stellar cluster Analysis package (ASteCA) was employed to derive the cluster's fundamental parameters, in particular their ages and metallicities, through an unassisted process. We find that our age-metallicity relations (AMRs) can not be fully matched to any of the estimations found in twelve previous works, and are better explained by a combination of several of them in different age intervals.
Three-dimensional rendering of segmented object using matlab - biomed 2010.
Anderson, Jeffrey R; Barrett, Steven F
2010-01-01
The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.
Modality specificity in the cerebro-cerebellar neurocircuitry during working memory.
Ng, H B Tommy; Kao, K-L Cathy; Chan, Y C; Chew, Effie; Chuang, K H; Chen, S H Annabel
2016-05-15
Previous studies have suggested cerebro-cerebellar circuitry in working memory. The present fMRI study aims to distinguish differential cerebro-cerebellar activation patterns in verbal and visual working memory, and employs a quantitative analysis to deterimine lateralization of the activation patterns observed. Consistent with Chen and Desmond (2005a,b) predictions, verbal working memory activated a cerebro-cerebellar circuitry that comprised left-lateralized language-related brain regions including the inferior frontal and posterior parietal areas, and subcortically, right-lateralized superior (lobule VI) and inferior cerebellar (lobule VIIIA/VIIB) areas. In contrast, a distributed network of bilateral inferior frontal and inferior temporal areas, and bilateral superior (lobule VI) and inferior (lobule VIIB) cerebellar areas, was recruited during visual working memory. Results of the study verified that a distinct cross cerebro-cerebellar circuitry underlies verbal working memory. However, a neural circuitry involving specialized brain areas in bilateral neocortical and bilateral cerebellar hemispheres subserving visual working memory is observed. Findings are discussed in the light of current models of working memory and data from related neuroimaging studies. Copyright © 2016 Elsevier B.V. All rights reserved.
Amagasa, Takashi; Nakayama, Takeo
2012-07-01
To test the hypothesis that relationship reported between long working hours and depression was inconsistent in previous studies because job demand was treated as a confounder. Structural equation modeling was used to construct five models, using work-related factors and depressive mood scale obtained from 218 clerical workers, to test for goodness of fit and was externally validated with data obtained from 1160 sales workers. Multiple logistic regression analysis was also performed. The model that showed that long working hours increased depression risk when job demand was regarded as an intermediate variable was the best fitted model (goodness-of-fit index/root-mean-square error of approximation: 0.981 to 0.996/0.042 to 0.044). The odds ratio for depression risk with work that was high demand and 60 hours or more per week was estimated at 2 to 4 versus work that was low demand and less than 60 hours per week. Long working hours increased depression risk, with job demand being an intermediate variable.
Preservice teachers' objectives and their experience of practical work
NASA Astrophysics Data System (ADS)
Nivalainen, V.; Asikainen, M. A.; Hirvonen, P. E.
2013-06-01
This study explores third-year preservice physics teachers’ (n=32) views concerning the objectives of practical work at school and university. Content analysis of their essays about practical work revealed not only the objectives of the practical work undertaken but also how they had experienced teaching as school and university students. The objectives most commonly referred to were related to the connections between theory and practice, motivation, understanding phenomena, learning how to observe, and learning how to report. In contrast, some objectives were recognized only rarely, which is an important issue for discussion as a future challenge. Preservice teachers’ positive experiences of practical work resulted from the successful implementation of practical work. According to our findings, practical work can in many cases be regarded as successful, especially when the participants understand the objectives of the teaching. In contrast, negative experiences reflected failures or difficulties in implementation. We conclude by suggesting that preservice teachers should be offered opportunities to reflect on their previous experiences and to see and experience in practice the advantages of practical work.
On analyzing free-response data on location level
NASA Astrophysics Data System (ADS)
Bandos, Andriy I.; Obuchowski, Nancy A.
2017-03-01
Free-response ROC (FROC) data are typically collected when primary question of interest is focused on the proportions of the correct detection-localization of known targets and frequencies of false positive responses, which can be multiple per subject (image). These studies are particularly relevant for CAD and related applications. The fundamental tool of the location-level FROC analysis is the FROC curve. Although there are many methods of FROC analysis, as we describe in this work, some of the standard and popular approaches, while important, are not suitable for analyzing specifically the location-level FROC performance as summarized by the FROC curve. Analysis of the FROC curve, on the other hand, might not be straightforward. Recently we developed an approach for the location-level analysis of the FROC data using the well-known tools for clustered ROC analysis. In the current work, based on previously developed concepts, and using specific examples, we demonstrate the key reasons why specifically location-level FROC performance cannot be fully addressed by the common approaches as well as illustrate the proposed solution. Specifically, we consider the two most salient FROC approaches, namely JAFROC and the area under the exponentially transformed FROC curve (AFE) and show that clearly superior FROC curves can have lower values for these indices. We describe the specific features that make these approaches inconsistent with FROC curves. This work illustrates some caveats for using the common approaches for location-level FROC analysis and provides guidelines for the appropriate assessment or comparison of FROC systems.
An overview of data acquisition, signal coding and data analysis techniques for MST radars
NASA Technical Reports Server (NTRS)
Rastogi, P. K.
1986-01-01
An overview is given of the data acquisition, signal processing, and data analysis techniques that are currently in use with high power MST/ST (mesosphere stratosphere troposphere/stratosphere troposphere) radars. This review supplements the works of Rastogi (1983) and Farley (1984) presented at previous MAP workshops. A general description is given of data acquisition and signal processing operations and they are characterized on the basis of their disparate time scales. Then signal coding, a brief description of frequently used codes, and their limitations are discussed, and finally, several aspects of statistical data processing such as signal statistics, power spectrum and autocovariance analysis, outlier removal techniques are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cavagnaro, D.M.
1978-11-01
This bibliography was prepared in order to bring together Federally-funded research relating to archaeology. It is divided into two sections. The first deals with the chemical analysis of archaeological specimens primarily using activation analysis. Articles studied include metals, pottery, coins, paintings, soils, glass, and paper from Medieval, Grecian, Egyptian, Mayan, and prehistoric times. The second section cites other archaeological research, including results of excavations from the United States. Also covered is work on preservation of artifacts and remote sensing for site location. (This updated bibliography contains 137 abstracts, none of which are new entries to the previous edition.)
Hossain, Mohammad B; Li, Huiqi; Hedmer, Maria; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin
2015-12-01
Welders are at risk for cardiovascular disease. Recent studies linked tobacco smoke exposure to hypomethylation of the F2RL3 (coagulation factor II (thrombin) receptor-like 3) gene, a marker for cardiovascular disease prognosis and mortality. However, whether welding fumes cause hypomethylation of F2RL3 remains unknown. We investigated 101 welders (median span of working as a welder: 7 years) and 127 unexposed controls (non-welders with no obvious exposure to respirable dust at work), age range 23-60 years, all currently non-smoking, in Sweden. The participants were interviewed about their work history, lifestyle factors and diseases. Personal sampling of respirable dust was performed for the welders. DNA methylation of F2RL3 in blood was assessed by pyrosequencing of four CpG sites, CpG_2 (corresponds to cg03636183) to CpG_5, in F2RL3. Multivariable linear regression analysis was used to assess the association between exposure to welding fumes and F2RL3 methylation. Welders had 2.6% lower methylation of CpG_5 than controls (p<0.001). Higher concentrations of measured respirable dust among the welders were associated with hypomethylation of CpG_2, CpG_4 and CpG_5 (β=-0.49 to -1.4, p<0.012); p<0.029 adjusted for age, previous smoking, passive smoking, education, current residence and respirator use. Increasing the number of years working as a welder was associated with hypomethylation of CpG_4 (linear regression analysis, β=-0.11, p=0.039, adjusted for previous smoking). Previous tobacco smokers had 1.5-4.7% (p<0.014) lower methylation of 3 of the 4 CpG sites in F2RL3 (CpG_2, CpG_4 and CpG_5) compared to never-smokers. A non-significant lower risk of cardiovascular disease with more methylation was observed for all CpG sites. Welding fumes exposure and previous smoking were associated with F2RL3 hypomethylation. This finding links low-to-moderate exposure to welding fumes to adverse effects on the cardiovascular system, and suggests a potential mechanistic pathway for this link, via epigenetic effects on F2RL3 expression. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Innstrand, Siw Tone; Langballe, Ellen Melbye; Espnes, Geir Arild; Aasland, Olaf Gjerløw; Falkum, Erik
2010-12-01
The aim of the present study was to examine the longitudinal relationship between job performance-based self-esteem (JPB-SE) and work-home interaction (WHI) in terms of the direction of the interaction (work-to-home vs. home-to-work) and the effect (conflict vs. facilitation). A sample of 3,475 respondents from eight different occupational groups (lawyers, physicians, nurses, teachers, church ministers, bus drivers, and people working in advertising and information technology) supplied data at two points of time with a two-year time interval. The two-wave, cross-lagged structural equations modeling (SEM) analysis demonstrated reciprocal relationships between these variables, i.e., job performance-based self-esteem may act as a precursor as well as an outcome of work-home interaction. The strongest association was between job performance-based self-esteem and work-to-home conflict. Previous research on work-home interaction has mainly focused on situational factors. This longitudinal study expands the work-home literature by demonstrating how individual vulnerability (job performance-based self-esteem) contributes to the explanation of work-home interactions. © 2010 The Authors. Scandinavian Journal of Psychology © 2010 The Scandinavian Psychological Associations.
Yu, Yue; Wang, Yuchen; Zhang, Jianxin
2017-09-01
Previous studies have revealed the association between work-family balance and job satisfaction. The present research further explored the underlying mechanism of this association and aimed to provide a moderated mediation model to explain if personality traits moderate the relationship between work-family balance and job satisfaction through work engagement. A cross-sectional study was conducted in which 263 employees from a petrochemical enterprise in China completed self-report questionnaires including the Work-Family Balance Scale, the Utrecht Work Engagement Scale, the Big Five Inventory-10, and the Job Satisfaction Scale. Hierarchical regression analysis and structural equation modeling showed that work engagement partially mediated the relationship between work-family balance and job satisfaction, and the indirect effect was further moderated only by extraversion. Therefore, an integrative moderated mediation model was proposed wherein work-family balance boosts job satisfaction by first enhancing employees' work engagement, while the indirect effect was in turn moderated by extraversion. The results suggest that interventions for improving job satisfaction may be enhanced by targeting work engagement, especially for employees with higher extraversion. © 2017 The Institute of Psychology, Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.
Cognitive work analysis to evaluate the problem of patient falls in an inpatient setting
Lopez, Karen Dunn; Cary, Michael P; Kanak, Mary F
2010-01-01
Objective To identify factors in the nursing work domain that contribute to the problem of inpatient falls, aside from patient risk, using cognitive work analysis. Design A mix of qualitative and quantitative methods were used to identify work constraints imposed on nurses, which may underlie patient falls. Measurements Data collection was done on a neurology unit staffed by 27 registered nurses and utilized field observations, focus groups, time–motion studies and written surveys (AHRQ Hospital Survey on Patient Culture, NASA-TLX, and custom Nursing Knowledge of Fall Prevention Subscale). Results Four major constraints were identified that inhibit nurses' ability to prevent patient falls. All constraints relate to work processes and the physical work environment, opposed to safety culture or nursing knowledge, as currently emphasized. The constraints were: cognitive ‘head data’, temporal workload, inconsistencies in written and verbal transfer of patient data, and limitations in the physical environment. To deal with these constraints, the nurses tend to employ four workarounds: written and mental chunking schemas, bed alarms, informal querying of the previous care nurse, and informal video and audio surveillance. These workarounds reflect systemic design flaws and may only be minimally effective in decreasing risk to patients. Conclusion Cognitive engineering techniques helped identify seemingly hidden constraints in the work domain that impact the problem of patient falls. System redesign strategies aimed at improving work processes and environmental limitations hold promise for decreasing the incidence of falls in inpatient nursing units. PMID:20442150
Cognitive work analysis to evaluate the problem of patient falls in an inpatient setting.
Lopez, Karen Dunn; Gerling, Gregory J; Cary, Michael P; Kanak, Mary F
2010-01-01
To identify factors in the nursing work domain that contribute to the problem of inpatient falls, aside from patient risk, using cognitive work analysis. A mix of qualitative and quantitative methods were used to identify work constraints imposed on nurses, which may underlie patient falls. Data collection was done on a neurology unit staffed by 27 registered nurses and utilized field observations, focus groups, time-motion studies and written surveys (AHRQ Hospital Survey on Patient Culture, NASA-TLX, and custom Nursing Knowledge of Fall Prevention Subscale). Four major constraints were identified that inhibit nurses' ability to prevent patient falls. All constraints relate to work processes and the physical work environment, opposed to safety culture or nursing knowledge, as currently emphasized. The constraints were: cognitive 'head data', temporal workload, inconsistencies in written and verbal transfer of patient data, and limitations in the physical environment. To deal with these constraints, the nurses tend to employ four workarounds: written and mental chunking schemas, bed alarms, informal querying of the previous care nurse, and informal video and audio surveillance. These workarounds reflect systemic design flaws and may only be minimally effective in decreasing risk to patients. Cognitive engineering techniques helped identify seemingly hidden constraints in the work domain that impact the problem of patient falls. System redesign strategies aimed at improving work processes and environmental limitations hold promise for decreasing the incidence of falls in inpatient nursing units.
Ergonomic analysis jobs in recovered factories.
Cuenca, Gabriela; Zotta, Gastón
2012-01-01
With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.
Racial Differences in the Association Between Night Shift Work and Melatonin Levels Among Women
Bhatti, Parveen; Mirick, Dana K.; Davis, Scott
2013-01-01
Reduced suppression of melatonin in response to working the night shift among people of Asian ancestry has been suggested as a possible explanation for the null results observed in a recent analysis of shift work and breast cancer risk in a Chinese cohort. The authors analyzed the impact of Asian versus white race on previously reported differences in urinary 6-sulfatoxymelatonin levels in a 2003–2008 study in Seattle, Washington, of female health-care workers that exclusively worked night or day shifts. A total of 225 white and 51 Asian participants were included in the analysis. Although 6-sulfatoxymelatonin levels were affected by night shift work in both racial groups, Asian night shift workers consistently showed 6-sulfatoxymelatonin levels that were closer to levels in day shift workers than did white night shift workers. Furthermore, differences in 6-sulfatoxymelatonin levels between white and Asian night shift workers relative to day shift workers were statistically significant in every instance (P < 0.05). These results suggest that Asians may be better able to maintain a “normal” circadian pattern of melatonin production compared with whites and suggest a biological mechanism by which Asian night shift workers may be at a reduced risk of cancer. PMID:23380044
Schedule Risk Analysis Of Southern Mainway Construction In Jember Regency
NASA Astrophysics Data System (ADS)
Susilo, K.; Wiguna, I. P. A.; Adi, T. J. W.
2017-11-01
In Jember Regency, it has been built Southern Cross Road (JLS) as part of regional project. On the implementation of previous construction, there were still some events which gave negative impact to the project. The purpose of this research is to analyze risk and its effect on schedule at the construction phase of JLS at Jember Regency. Risk identification process is carried out by site survey, literature studies and supporting data. The use of Probability and Impact Matrix were aimed to obtain the level of risk. Based on the analysis, it was obtained six highest risk that could affecting schedule, such as difficult access locations, heavy rains, increases of material price, broken road pavement work, change order, and work accident. Risk responses were proposed by applying agreement to guarantee stock and price of materials, prioritized drainage, and constructing bridge to solve difficult access. An intense coordination in the site, routine checks of quality, manufacturing of retailing walls were also needed to reduce possibility of distruption to pavement work. To avoid work accident, it is needed to socialize about harsh terrain condition, mutual allertness among supervisor, worker and the others, and also all personals must comply with savety rules.
Examples of challenges and opportunities in visual analysis in the digital humanities
NASA Astrophysics Data System (ADS)
Rushmeier, Holly; Pintus, Ruggero; Yang, Ying; Wong, Christiana; Li, David
2015-03-01
The massive digitization of books and manuscripts has converted millions of works that were once only physical into electronic documents. This conversion has made it possible for scholars to study large bodies of work, rather than just individual texts. This has offered new opportunities for scholarship in the humanities. Much previous work on digital collections has relied on optical character recognition and focused on the textual content of books. New work is emerging that is analyzing the visual layout and content of books and manuscripts. We present two different digital humanities projects in progress that present new opportunities for extracting data about the past, with new challenges for designing systems for scholars to interact with this data. The first project we consider is the layout and spectral content of thousands of pages from medieval manuscripts. We present the techniques used to study content variations in sets of similar manuscripts, and to study material variations that may indicate the location of manuscript production. The second project is the analysis of representations in the complete archive of Vogue magazine over 120 years. We present samples of applying computer vision techniques to understanding the changes in representation of women over time.
2018-01-01
Background Many studies have tried to develop predictors for return-to-work (RTW). However, since complex factors have been demonstrated to predict RTW, it is difficult to use them practically. This study investigated whether factors used in previous studies could predict whether an individual had returned to his/her original work by four years after termination of the worker's recovery period. Methods An initial logistic regression analysis of 1,567 participants of the fourth Panel Study of Worker's Compensation Insurance yielded odds ratios. The participants were divided into two subsets, a training dataset and a test dataset. Using the training dataset, logistic regression, decision tree, random forest, and support vector machine models were established, and important variables of each model were identified. The predictive abilities of the different models were compared. Results The analysis showed that only earned income and company-related factors significantly affected return-to-original-work (RTOW). The random forest model showed the best accuracy among the tested machine learning models; however, the difference was not prominent. Conclusion It is possible to predict a worker's probability of RTOW using machine learning techniques with moderate accuracy. PMID:29736160
Fuel Cycle Research & Development Technical Monthly-March 2012
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miller, Michael C.
2012-05-10
Several MPACT BCPs were executed in February, reflecting the shift in MPACT priorities directed late last year. Work continued on the FY2014 IPL, also bringing it in line with the new priorities. Preparations were made for the March MPACT Working Group meeting, in conjunction with Savannah River which is hosting the meeting. Steps were taken to initiate a new project with the World Institute for Nuclear Security, including discussions with WINS staff and preliminary work on the required procurement documentation. Several hardware issues were worked through. The newest detector array is working at LANL. A thorough analysis of previously collectedmore » Pu sample data using recently developed analysis code with improved spectral energy calibrations was completed. We now have a significantly better understanding of measurement uncertainties. Post-test analyses of the salt and sensor material for the first sensor test are almost complete. Sensor testing with different arrangements will continue and will be oriented based on post-test analysis of the first sensor test. Sensor materials for the next couple of tests are being fabricated. Materials with different annealing temperatures are being prepared for analysis. Fast Neutron Imaging to Quantify Nuclear Materials - The imager detectors repairs are complete and work with the imager is under way. The milestone requiring a report on LANSCE experiments was completed and submitted. Analysis of previous experiments and comparisons to simulations is near complete. Results are being compared with previous LANSCE-LSDS and RPI results. Additional data library (TENDL) is also being checked to see whether there are differences in the simulation results. The mid-year MIP Monitor project accomplishments and progress was presented at the MPACT meeting held in March at SRNL. Discussions around the meeting included inquiries into the feasibility of collecting process measurement data at H-Canyon, and it was explored further after the meeting. Kenneth Dayman, the graduate student from University of Texas, completed an initial draft of his master's thesis. His research will contribute to the multivariate classifier currently under development. Sarah Bender, the graduate student from Pennsylvania State University, presented her work on a poster and in a conference paper at the MARC IX meeting. A mass balance flowsheet for the fast reactor fuel was completed and a model simulation is scheduled to begin construction next month. The development of a mass balance flowsheet for light water reactor fuel will predict the behavior of the separation process using mathematical functions. The completed flowsheet will be utilized as the basis for constructing the model simulation for the electrochemical separations. Comments and review of the model from the MPACT Working Group meeting have been used to evaluate updates to the EChem model. A preliminary physical security layout has been developed in ATLAS. Thermal stability tests for high temperature microfluidic interconnections were completed on all compounds tested for bonding strength. An interconnection strategy was determined based on these results that we expect will allow for operation at 400C in the first generation of sampling systems. Design of the sampling system using the chosen interconnections was initiated, with handoff to an external foundry for fabrication based on ANL specified process conditions expected by the middle of the month. Monte Carlo simulations of the sampling system were conducted under conditions of realistic sampling size distributions, electrorefiner inhomogeneity distributions, and detector efficiencies. These simulations were used to establish a baseline limit of detection for system operation, assuming an on-line separation step is conducted before detection. Sensor for measuring density and depth of molten electrolyte - The procurement effort continued. 80% of the components ordered to assemble the double bubbler have arrived at the INL. Pratap Sadasivan, and his team have been working on the new metrics for proliferation and security. They have defined the basic structure and method, implementation strategy, needed data, and approach to application. Initial drafting of several sections of the milestone document was started. The MPACT Working Group meeting was hosted at SRS on March 13-15, 2012. Approximately 65 researchers from national labs, industry and universities attended the technical meetings at the Center for Hydrogen Research on March 13-14 with a working lunch each day. 37 persons participated in a site tour, including H-Canyon and the MOX Facility, on March 15. As part of the WG meeting, a presentation by SRNL was given on H-Canyon history, capabilities and opportunities for its use as an MPACT technology test bed. Used fuels storage security analysis, guidance and best practices - Coordination discussions continued for the MPACT used fuel security work packages.« less
Clark, William C.; Tomich, Thomas P.; van Noordwijk, Meine; Guston, David; Catacutan, Delia; Dickson, Nancy M.; McNie, Elizabeth
2016-01-01
Previous research on the determinants of effectiveness in knowledge systems seeking to support sustainable development has highlighted the importance of “boundary work” through which research communities organize their relations with new science, other sources of knowledge, and the worlds of action and policymaking. A growing body of scholarship postulates specific attributes of boundary work that promote used and useful research. These propositions, however, are largely based on the experience of a few industrialized countries. We report here on an effort to evaluate their relevance for efforts to harness science in support of sustainability in the developing world. We carried out a multicountry comparative analysis of natural resource management programs conducted under the auspices of the Consultative Group on International Agricultural Research. We discovered six distinctive kinds of boundary work contributing to the successes of those programs—a greater variety than has been documented in previous studies. We argue that these different kinds of boundary work can be understood as a dual response to the different uses for which the results of specific research programs are intended, and the different sources of knowledge drawn on by those programs. We show that these distinctive kinds of boundary work require distinctive strategies to organize them effectively. Especially important are arrangements regarding participation of stakeholders, accountability in governance, and the use of “boundary objects.” We conclude that improving the ability of research programs to produce useful knowledge for sustainable development will require both greater and differentiated support for multiple forms of boundary work. PMID:21844351
An Experimental and Computational Analysis of Primary Cilia Deflection Under Fluid Flow
Downs, Matthew E.; Nguyen, An M.; Herzog, Florian A.; Hoey, David A.; Jacobs, Christopher R.
2013-01-01
In this work we have developed a novel model of the deflection of primary cilia experiencing fluid flow accounting for phenomena not previously considered. Specifically, we developed a large rotation formulation that accounts for rotation at the base of the cilium, the initial shape of the cilium and fluid drag at high deflection angles. We utilized this model to analyze full three dimensional datasets of primary cilia deflecting under fluid flow acquired with high-speed confocal microscopy. We found a wide variety of previously unreported bending shapes and behaviors. We also analyzed post-flow relaxation patterns. Results from our combined experimental and theoretical approach suggest that the average flexural rigidity of primary cilia might be higher than previously reported (Schwartz et al. 1997). In addition our findings indicate the mechanics of primary cilia are richly varied and mechanisms may exist to alter their mechanical behavior. PMID:22452422
3D landmarking in multiexpression face analysis: a preliminary study on eyebrows and mouth.
Vezzetti, Enrico; Marcolin, Federica
2014-08-01
The application of three-dimensional (3D) facial analysis and landmarking algorithms in the field of maxillofacial surgery and other medical applications, such as diagnosis of diseases by facial anomalies and dysmorphism, has gained a lot of attention. In a previous work, we used a geometric approach to automatically extract some 3D facial key points, called landmarks, working in the differential geometry domain, through the coefficients of fundamental forms, principal curvatures, mean and Gaussian curvatures, derivatives, shape and curvedness indexes, and tangent map. In this article we describe the extension of our previous landmarking algorithm, which is now able to extract eyebrows and mouth landmarks using both old and new meshes. The algorithm has been tested on our face database and on the public Bosphorus 3D database. We chose to work on the mouth and eyebrows as a separate study because of the role that these parts play in facial expressions. In fact, since the mouth is the part of the face that moves the most and affects mainly facial expressions, extracting mouth landmarks from various facial poses means that the newly developed algorithm is pose-independent. This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors http://www.springer.com/00266 .
Bergkvist, Jonas; Ekström, Simon; Wallman, Lars; Löfgren, Mikael; Marko-Varga, György; Nilsson, Johan; Laurell, Thomas
2002-04-01
A recently introduced silicon microextraction chip (SMEC), used for on-line proteomic sample preparation, has proved to facilitate the process of protein identification by sample clean up and enrichment of peptides. It is demonstrated that a novel grid-SMEC design improves the operating characteristics for solid-phase microextraction, by reducing dispersion effects and thereby improving the sample preparation conditions. The structures investigated in this paper are treated both numerically and experimentally. The numerical approach is based on finite element analysis of the microfluidic flow in the microchip. The analysis is accomplished by use of the computational fluid dynamics-module FLOTRAN in the ANSYS software package. The modeling and analysis of the previously reported weir-SMEC design indicates some severe drawbacks, that can be reduced by changing the microextraction chip geometry to the grid-SMEC design. The overall analytical performance was thereby improved and also verified by experimental work. Matrix-assisted laser desorption/ionization mass spectra of model peptides extracted from both the weir-SMEC and the new grid-SMEC support the numerical analysis results. Further use of numerical modeling and analysis of the SMEC structures is also discussed and suggested in this work.
An assessment of emergency medicine residents' ability to perform in a multitasking environment.
Ledrick, David; Fisher, Susan; Thompson, Justin; Sniadanko, Mark
2009-09-01
Multitasking (MT) is a term often applied to emergency medicine (EM), but it is still poorly understood. In an effort to facilitate MT research in EM, the authors conducted this pilot study to describe EM residents' scores on a Multi-Tasking Assessment Tool (MTAT) and compare these scores with the residents' work efficiency in the emergency department. The authors administered a previously developed test of MT ability to EM residents. They performed a multiple regression analysis to determine the effect of MT ability on resident work efficiency, defining efficiency as the number of relative value units billed per hour. They controlled the analysis for year of training and medical knowledge using as a standard the in-service exam administered by the American Board of Emergency Medicine. Complete data for 35 residents were available for analysis. Work efficiency was multivariately correlated with MTAT scores and year of training (P < .05). Whereas year of training explained the majority of the variance, a resident's MT ability accounted for a smaller but still significant portion. This pilot study further validates the MTAT and lays the groundwork for further research in MT in EM. Resident year of training and MTAT scores explain the variability in resident work efficiency significantly more than medical knowledge. Understanding MT ability may ultimately help in resident selection, education, and remediation as well as career counseling and improvement of practice systems in EM.
DOE Office of Scientific and Technical Information (OSTI.GOV)
The plpdfa software is a product of an LDRD project at LLNL entitked "Adaptive Sampling for Very High Throughput Data Streams" (tracking number 11-ERD-035). This software was developed by a graduate student summer intern, Chris Challis, who worked under project PI Dan Merl furing the summer of 2011. The software the source code is implementing is a statistical analysis technique for clustering and classification of text-valued data. The method had been previously published by the PI in the open literature.
ERIC Educational Resources Information Center
Harrison, Colin; Lunzer, Eric A.; Tymms, Peter; Fitz-Gibbon, Carol Taylor; Restorick, Jane
2004-01-01
This paper reports a previously unpublished comparative analysis of data from the ImpaCT2 study investigating the relationship between students' performance in England on national tests and their reported use of information technology (particularly networked technology) for school work, at three age levels (11, 14 and 16), in English, Maths and…
ERIC Educational Resources Information Center
Metcalf, Richard M.
Although there has been previous research concerned with image size, brightness, and contrast in projection standards, the work has lacked careful conceptualization. In this study, size was measured in terms of the visual angle subtended by the material, brightness was stated in foot-lamberts, and contrast was defined as the ratio of the…
Image watermarking capacity analysis based on Hopfield neural network
NASA Astrophysics Data System (ADS)
Zhang, Fan; Zhang, Hongbin
2004-11-01
In watermarking schemes, watermarking can be viewed as a form of communication problems. Almost all of previous works on image watermarking capacity are based on information theory, using Shannon formula to calculate the capacity of watermarking. In this paper, we present a blind watermarking algorithm using Hopfield neural network, and analyze watermarking capacity based on neural network. In our watermarking algorithm, watermarking capacity is decided by attraction basin of associative memory.
External Mask Based Depth and Light Field Camera
2013-12-08
laid out in the previous light field cameras. A good overview of the sampling of the plenoptic function can be found in the survey work by Wetzstein et...view is shown in Figure 6. 5. Applications High spatial resolution depth and light fields are a rich source of information about the plenoptic ...http://www.pelicanimaging.com/. [4] E. Adelson and J. Wang. Single lens stereo with a plenoptic camera. Pattern Analysis and Machine Intelligence
Data Warehouse Design from HL7 Clinical Document Architecture Schema.
Pecoraro, Fabrizio; Luzi, Daniela; Ricci, Fabrizio L
2015-01-01
This paper proposes a semi-automatic approach to extract clinical information structured in a HL7 Clinical Document Architecture (CDA) and transform it in a data warehouse dimensional model schema. It is based on a conceptual framework published in a previous work that maps the dimensional model primitives with CDA elements. Its feasibility is demonstrated providing a case study based on the analysis of vital signs gathered during laboratory tests.
Options for Educating Students Attending Department of Defense Schools in the United States
2016-01-01
Middlemiss, Martha Brown, Stephen F. Hovanic, Joel Hansen, Frank O’Gara, Elaine Kanellis, Robert M. Brady, Claudia Shaw , Jessica Ray Huffman, Rita...could receive students. Chapter Three explains our methods and data sources for assessing options, including the business case analysis approach...account for these analyses. We also identify implementation issues and barriers for each option, based on work of previous studies with updates to
Functional Analysis of Human NF1 in Drosophila
2008-12-01
also have learning problem. Such learning phenotypes have been recapitulated in animal models, including in mouse and Drosophila mutants. This proposal...by examining the phenotypes of mutated human genes expressed in Drosophila NF1 null mutants. We also propose that Gsα/NF1 activated AC pathway...in both Drosophila and mouse NF1 models. Our previous work has shown that defective cAMP signaling leads to the learning phenotype in Drosophila Nf1
Study of the ink-paper interaction by image analysis: surface and bulk inspection
NASA Astrophysics Data System (ADS)
Fiadeiro, Paulo T.; de O. Mendes, António; M. Ramos, Ana M.; L. de Sousa, Sónia C.
2013-11-01
In this work, two optical systems previously designed and implemented by our research team, were used to enable the surface and bulk inspection of the ink-paper interaction by image analysis. Basically, the first system works by ejecting micro-liter ink drops onto the papers surface while monitoring the event under three different views over time. The second system is used for sectioning the paper samples through their thickness and to simultaneously acquire images of the ink penetration of each section cut. In the performed experiments, three black inks of different brands and a common copy paper were chosen, used, and tested with the two developed optical systems. Both qualitative and quantitative analyses were carried out at the surface level and in the bulk of the paper. In terms of conclusions, it was shown that the three tested ink-paper combinations revealed very distinct characteristics.
Rabbetts, Lyn
2017-06-02
A specific set of assessment scales can underpin the management of distressing symptoms of patients requiring palliative care. A research assistant supported nurses working in a rural hospital setting during the introduction of these scales. A secondary analysis was conducted to further explore the qualitative data of a previously reported mixed-method study. In particular, the experiences of nurses working alongside a research assistant in the facilitation of using a new assessment form. Purposeful sampling was employed: participating nurses were invited to attend one of three focus group meetings. Data analysis revealed three main themes: a contact person, coach/mentor and extra help initiatives. Three to four subthemes corresponded with each main theme. Findings suggest nurses benefit from having someone to assist in learning about new documentation. Nurses respond positively to mentorship and practical guidance when integrating a new assessment form into routine evidence-based practice.
Parmenter, Christopher D J; Fay, Michael W; Hartfield, Cheryl; Eltaher, Hoda M
2016-04-01
The preparation of thinned lamellae from bulk samples for transmission electron microscopy (TEM) analysis has been possible in the focussed ion beam scanning electron microscope (FIB-SEM) for over 20 years via the in situ lift-out method. Lift-out offers a fast and site specific preparation method for TEM analysis, typically in the field of materials science. More recently it has been applied to a low-water content biological sample (Rubino 2012). This work presents the successful lift-out of high-water content lamellae, under cryogenic conditions (cryo-FIB lift-out) and using a nanomanipulator retaining its full range of motion, which are advances on the work previously done by Rubino (2012). Strategies are explored for maintaining cryogenic conditions, grid attachment using cryo-condensation of water and protection of the lamella when transferring to the TEM. © 2016 Wiley Periodicals, Inc.
NASA Astrophysics Data System (ADS)
Babilotte, P.; Dubreuil, M.; Rivet, S.; Lijour, Y.; Sevrain, D.; Martin, L.; Le Brun, G.; Le Grand, Y.; Le Jeune, B.
2011-10-01
Human liver biopsy samples, consisting into a 16 μm thickness biomaterial chemically fixed into a formaldehyde matrix, and stained by red picrosirius dye, are analysed for different states of fibrosis degeneration. Polarimetric methods, and specially Mueller polarimetry based on wavelength coding, have been qualified as an efficient tool to describe many different biological aspects. The polarimetric characteristics of the media, extracted from a Lu and Chipman decomposition1, 2 of their Mueller Matrix (MM), are correlated with the degeneracy level of tissue. Different works and results linked to the clinical analysis will be presented and compared to previous performed works.3 Polarimetric imaging will be presented and compared with SHG measurements. A statistical analysis of the distribution of polarimetric parameters (such as the retardance R and depolarisation Pd) will be presented too, in order to characterise the liver fibrosis level into the biomaterial under study.
Ntaios, George; Papavasileiou, Vasileios; Diener, Hans-Chris; Makaritsis, Konstantinos; Michel, Patrik
2017-08-01
Background In a previous systematic review and meta-analysis, we assessed the efficacy and safety of nonvitamin-K antagonist oral anticoagulants versus warfarin in patients with atrial fibrillation and stroke or transient ischemic attack. Since then, new information became available. Aim The aim of the present work was to update the results of the previous systematic review and meta-analysis. Methods We searched PubMed until 24 August 2016 for randomized controlled trials using the following search items: "atrial fibrillation" and "anticoagulation" and "warfarin" and "previous stroke or transient ischemic attack." Eligible studies had to be phase III trials in patients with atrial fibrillation comparing warfarin with nonvitamin-K antagonist oral anticoagulants currently on the market or with the intention to be brought to the market in North America or Europe. The outcomes assessed in the efficacy analysis included stroke or systemic embolism, stroke, ischemic or unknown stroke, disabling or fatal stroke, hemorrhagic stroke, cardiovascular death, death from any cause, and myocardial infarction. The outcomes assessed in the safety analysis included major bleeding, intracranial bleeding, and major gastrointestinal bleeding. We performed fixed effects analyses on intention-to-treat basis. Results Among 183 potentially eligible articles, four were included in the meta-analysis. In 20,500 patients, compared to warfarin, nonvitamin-K antagonist oral anticoagulants were associated with a significant reduction of stroke/systemic embolism (relative risk reduction: 13.7%, absolute risk reduction: 0.78%, number needed to treat to prevent one event: 127), hemorrhagic stroke (relative risk reduction: 50.0%, absolute risk reduction: 0.63%, number needed to treat: 157), any stroke (relative risk reduction: 13.1%, absolute risk reduction: 0.7%, number needed to treat: 142), and intracranial hemorrhage (relative risk reduction: 46.1%, absolute risk reduction: 0.88%, number needed to treat: 113) over 1.8-2.8 years. Conclusions This updated meta-analysis in 20,500 atrial fibrillation patients with previous stroke or transient ischemic attack shows that compared to warfarin non-vitamin-K antagonist oral anticoagulants are associated with a significant reduction of stroke, stroke or systemic embolism, hemorrhagic stroke, and intracranial bleeding.
Spatial earthquake hazard assessment of Evansville, Indiana
Rockaway, T.D.; Frost, J.D.; Eggert, D.L.; Luna, R.
1997-01-01
The earthquake hazard has been evaluated for a 150-square-kilometer area around Evansville, Indiana. GIS-QUAKE, a system that combines liquefaction and ground motion analysis routines with site-specific geological, geotechnical, and seismological information, was used for the analysis. The hazard potential was determined by using 586 SPT borings, 27 CPT sounding, 39 shear-wave velocity profiles and synthesized acceleration records for body-wave magnitude 6.5 and 7.3 mid-continental earthquakes, occurring at distances of 50 km and 250 km, respectively. The results of the GIS-QUAKE hazard analyses for Evansville identify areas with a high hazard potential that had not previously been identified in earthquake zonation studies. The Pigeon Creek area specifically is identified as having significant potential for liquefaction-induced damage. Damage as a result of ground motion amplification is determined to be a moderate concern throughout the area. Differences in the findings of this zonation study and previous work are attributed to the size and range of the database, the hazard evaluation methodologies, and the geostatistical interpolation techniques used to estimate the hazard potential. Further, assumptions regarding the groundwater elevations made in previous studies are also considered to have had a significant effect on the results.
Media multitasking and implicit learning.
Edwards, Kathleen S; Shin, Myoungju
2017-07-01
Media multitasking refers to the simultaneous use of different forms of media. Previous research comparing heavy media multitaskers and light media multitaskers suggests that heavy media multitaskers have a broader scope of attention. The present study explored whether these differences in attentional scope would lead to a greater degree of implicit learning for heavy media multitaskers. The study also examined whether media multitasking behaviour is associated with differences in visual working memory, and whether visual working memory differentially affects the ability to process contextual information. In addition to comparing extreme groups (heavy and light media multitaskers) the study included analysis of people who media multitask in moderation (intermediate media multitaskers). Ninety-four participants were divided into groups based on responses to the media use questionnaire, and completed the contextual cueing and n-back tasks. Results indicated that the speed at which implicit learning occurred was slower in heavy media multitaskers relative to both light and intermediate media multitaskers. There was no relationship between working memory performance and media multitasking group, and no relationship between working memory and implicit learning. There was also no evidence for superior performance of intermediate media multitaskers. A deficit in implicit learning observed in heavy media multitaskers is consistent with previous literature, which suggests that heavy media multitaskers perform more poorly than light media multitaskers in attentional tasks due to their wider attentional scope.
Sick of inequality: gender and support for paid sick days.
Lindemann, Danielle J; Houser, Linda; White, Karen
2015-01-01
The availability of paid sick days (PSD) is on the forefront of policy issues relating to women's health and well-being. Previous research regarding PSD and other forms of family-work balance legislation has linked access to paid time off from work for addressing one's own or another's health concerns to a range of health benefits for working women and their families. In general, public support for such policies is high, but little work has tested the extent to which support extends to PSD. Researchers have yet to engage in a rigorous statistical analysis of public opinion on PSD, including whether opinion varies by gender. Using data from a 2013 poll of adults in New Jersey (n = 925), we bridged this research gap by conducting the first multivariate analysis of public attitudes toward PSD. As expected, we found markedly high levels of support for PSD across all respondents, with a preponderance of most sociodemographic categories supporting proposed PSD legislation in New Jersey. We also found that gender was a strong predictor of support for PSD, with women significantly (odds ratio, 1.916; p ≤ .01) more likely than men to be in favor of such legislation. We discuss the implications of our findings for future work on PSD as well as for research concerning women, wellness, and work-life legislation more broadly. Published by Elsevier Inc.
Using Cognitive Work Analysis to Fit Decision Support Tools to Nurse Managers’ Work Flow
Brewer, Barbara B.; Logue, Melanie D.; Gephart, Sheila; Verran, Joyce A.
2011-01-01
Purpose To better understand the environmental constraints on nurse managers that impact their need for and use of decision support tools, we conducted a Cognitive Work Analysis (CWA). A complete CWA includes system analyses at five levels: work domain, decision-making procedures, decision-making strategies, social organization/collaboration, and worker skill level. Here we describe the results of the Work Domain Analysis (WDA) portion in detail then integrate the WDA with other portions of the CWA, reported previously, to generate a more complete picture of the nurse manager’s work domain. Methods Data for the WDA were obtained from semi-structured interviews with nurse managers, division directors, CNOs, and other managers (n = 20) on 10 patient care units in 3 Arizona hospitals. The WDA described the nurse manager’s environment in terms of the constraints it imposes on the nurse manager’s ability to achieve targeted outcomes through organizational goals and priorities, functions, processes, as well as work objects and resources (e.g., people, equipment, technology, and data). Constraints were identified and summarized through qualitative thematic analysis. Results The results highlight the competing priorities, and external and internal constraints that today’s nurse managers must satisfy as they try to improve quality and safety outcomes on their units. Nurse managers receive a great deal of data, much in electronic format. Although dashboards were perceived as helpful because they integrated some data elements, no decision support tools were available to help nurse managers with planning or answering “what if” questions. The results suggest both the need for additional decision support to manage the growing complexity of the environment, and the constraints the environment places on the design of that technology if it is to be effective. Limitations of the study include the small homogenous sample and the reliance on interview data targeting safety and quality. PMID:21862397
Using Cognitive Work Analysis to fit decision support tools to nurse managers' work flow.
Effken, Judith A; Brewer, Barbara B; Logue, Melanie D; Gephart, Sheila M; Verran, Joyce A
2011-10-01
To better understand the environmental constraints on nurse managers that impact their need for and use of decision support tools, we conducted a Cognitive Work Analysis (CWA). A complete CWA includes system analyses at five levels: work domain, decision-making procedures, decision-making strategies, social organization/collaboration, and worker skill level. Here we describe the results of the Work Domain Analysis (WDA) portion in detail then integrate the WDA with other portions of the CWA, reported previously, to generate a more complete picture of the nurse manager's work domain. Data for the WDA were obtained from semi-structured interviews with nurse managers, division directors, CNOs, and other managers (n = 20) on 10 patient care units in three Arizona hospitals. The WDA described the nurse manager's environment in terms of the constraints it imposes on the nurse manager's ability to achieve targeted outcomes through organizational goals and priorities, functions, processes, as well as work objects and resources (e.g., people, equipment, technology, and data). Constraints were identified and summarized through qualitative thematic analysis. The results highlight the competing priorities, and external and internal constraints that today's nurse managers must satisfy as they try to improve quality and safety outcomes on their units. Nurse managers receive a great deal of data, much in electronic format. Although dashboards were perceived as helpful because they integrated some data elements, no decision support tools were available to help nurse managers with planning or answering "what if" questions. The results suggest both the need for additional decision support to manage the growing complexity of the environment, and the constraints the environment places on the design of that technology if it is to be effective. Limitations of the study include the small homogeneous sample and the reliance on interview data targeting safety and quality. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.
Determinants for return to work among sickness certified patients in general practice.
von Celsing, Anna-Sophia; Svärdsudd, Kurt; Eriksson, Hans-G; Björkegren, Karin; Eriksson, Margaretha; Wallman, Thorne
2012-12-14
Long-term sickness absence is one of the main risk factors for permanent exit out of the labour market. Early identification of the condition is essential to facilitate return to work. The aim of this study was to analyse possible determinants of return to work and their relative impact. All 943 subjects aged 18 to 63 years, sickness certified at a Primary Health Care Centre in Sweden from 1 January until 31 August 2004, were followed up for three years. Baseline information on sex, age, sick leave diagnosis, employment status, extent of sick leave, and sickness absence during the year before baseline was obtained, as was information on all compensated days of sick leave, disability pension and death during follow-up. Slightly more than half the subjects were women, mean age was 39 years. Half of the study population returned to work within 14 days after baseline, and after three years only 15 subjects were still on sick leave. In multivariate proportional hazards regression analysis the extent of previous sick leave, age, being on part-time sick leave, and having a psychiatric, musculoskeletal, cardiovascular, nervous disease, digestive system, or injury or poisoning diagnosis decreased the return to work rate, while being employed increased it. Marital status, sex, being born in Sweden, citizenship, and annual salary had no influence. In logistic regression analyses across follow-up time these variables altogether explained 88-90% of return to work variation. Return to work was positively or negatively associated by a number of variables easily accessible in the GP's office. Track record data in the form of previous sick leave was the most influential variable.
Wickrama, Kandauda K A S; O'Neal, Catherine Walker; Lorenz, Frederick O
2017-03-30
Although the detrimental physical health effects of work insecurity have been noted in previous research, less is known about the mediating processes, such as anxiety symptoms, that link work insecurity to physical health. Even less research has explored these effects at specific life stages and how these effects may impact significant others, even though the impact of this stress may vary across the life course and the mutual influences between married partners may cause dyadic effects stemming from partners' work insecurity. To fill these gaps, the current study incorporates theories that emphasize the stress-work connection, such as stress appraisal theory (Lazarus, 1999) and resource conservation theory (Hobfoll, 1989), into a neurobiological stress-health perspective. This study uses a sample of 330 consistently married, dual-earner husbands and wives who provided data at multiple time points over a 10-year period from 1991 to 2001. Results from a model including growth curves of work insecurity and anxiety symptoms when respondents were in their early middle years and reports of physical illness in their later middle years generally supported the hypothesized model. Both the level and rate of change in work insecurity were related to the change in anxiety symptoms over time. Similarly, the level and rate of change in anxiety symptoms from 1991 to 1994 were linked to subsequent illness years later in 2001. There was only partial support for the existence of partner effects. Findings are discussed as they relate to previous research as well as policy and clinical implications. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Ethics expertise for health technology assessment: a Canadian national survey.
Bond, Kenneth; Oremus, Mark; Duthie, Katherine M; Griener, Glenn G
2014-04-01
The aim of this study was to identify individuals with expertise in ethics analysis in Canada, who might contribute to health technology assessment (HTA); to gauge these individuals' familiarity with, and experience participating in, the production of HTA. A contact list was developed using the Canadian Bioethics Society membership list and faculty listings of Canadian universities, bioethics centers, and health agencies. An eighteen-question email survey was distributed to potential respondents to collect data on demographic information, education and work experience in applied ethics, and involvement in HTA. The survey response rate was 52.8 percent (350/663). Respondents worked primarily in academic institutions (50.4 percent) or hospitals (15.4 percent). Many respondents (83.1 percent) had education, formal training, or work-related experience in practical ethics related to health care, with many having a doctorate (34.5 percent) or master's degree (19.0 percent). One quarter (24.5 percent; n = 87) of respondents indicated they had been involved in an analysis of ethical issues for HTA. Almost two-thirds (65.4 percent; n = 165) of those who had not previously participated in ethics analysis believed they might usefully contribute to an analysis of ethical issues in HTA. Experts who have conducted ethics analysis in HTA had more than twice the odds of having education and training in ethics and a PhD than those who might contribute to ethics analysis. Many people have contributed to ethics analysis in HTA in Canada, and more are willing to do so. Given the absence of a reliable credential for ethics expertise, HTA producers should exercise caution when enlisting ethics experts.
Sports- and Work-Related Outcomes After Shoulder Hemiarthroplasty.
Garcia, Grant H; Mahony, Gregory T; Fabricant, Peter D; Wu, Hao-Hua; Dines, David M; Warren, Russell F; Craig, Edward V; Gulotta, Lawrence V
2016-02-01
With an active aging population, more patients expect to return to previous activities and work after surgery. To determine the rate and timing to return of sports and employment after shoulder hemiarthroplasty. Case series; Level of evidence, 4. This was a retrospective review of consecutive patients who underwent shoulder hemiarthroplasty from 2007 to 2013. Follow-up consisted of a patient-reported questionnaire regarding physical fitness, sporting activities, and work status. From 105 patients screened, 79 were available for follow-up. The average follow-up time was 63.1 months, and the average age at follow-up was 69 years. Scores on the visual analog scale for pain improved from 6.2 to 2.1 (P < .001) postoperatively, and those on the American Shoulder and Elbow Surgeons (ASES) shoulder assessment improved from 34.6 to 71.3 (P < .001). Patients older than 65 years had significantly lower absolute postoperative ASES scores (P = .041) but experienced similar improvement from their preoperative baseline (P = .158) compared with patients younger than 65 years. There were 58 patients who played sports preoperatively, and 67.2% of these restarted at least 1 of their previous sports postoperatively. The average time to return to full sports was 6.5 months for those who returned. Direct rates of return were as follows: fitness sports (69%), swimming (65%), running (64%), cycling (63%), and doubles tennis (57%). Younger age was associated with highest demand level achieved (P = .023). Forty-nine patients worked preoperatively, with 69.4% returning to previous employment after surgery; the average time to return to work was 1.4 months. In comparative analysis, patients who did not return to work had a higher mean body mass index (32 ± 7 vs 27 ± 5 kg/m(2); P < .008). In this hemiarthroplasty cohort, there was a 67.2% rate of return to 1 or more sports at an average of 6.5 months postoperatively. Patients older than 65 years experienced similar improvements in ASES scores compared with patients younger than 65 years, although absolute scores were lower on average. Those who returned to higher demand sports were younger on average. Of patients working preoperatively, 69.4% returned to their previous employment at an average of 1.4 months. Patients who did not return to employment had significantly higher body mass index on average. These findings will help surgeons manage expectations of shoulder hemiarthroplasty candidates preoperatively. © 2015 The Author(s).
Lind-Null, Angie; Larsen, Kim
2009-01-01
The Nisqually Fall Chinook population is one of 27 stocks in the Puget Sound evolutionarily significant unit listed as threatened under the Federal Endangered Species Act (ESA). Preservation and extensive restoration of the Nisqually delta ecosystem is currently taking place to assist in recovery of the stock as juvenile Fall Chinook salmon are dependent upon the estuary. A pre-restoration baseline that includes characterization of life history types, estuary residence times, growth rates, and habitat use is needed to evaluate the potential response of hatchery and natural origin Chinook salmon to restoration efforts and determine restoration success. Otolith analysis was selected to examine Chinook salmon life history, growth, and residence in the Nisqually Estuary. Previously funded work on wild samples collected in 2004 established the growth rate and length of residence associated with various habitats. The purpose of the current study is to build on the previous work by incorporating otolith microstructure analysis from 2005 (second sampling year), to verify findings from 2004, and to evaluate between-year variation in otolith microstructure. Our results from this second year of analysis indicated no inter-annual variation in the appearance of the tidal delta check (TDCK) and delta-flats check (DFCK). However, a new life history type (fry migrant) was observed on samples collected in 2005. Fish caught in the tidal delta regardless of capture date spent an average of 17 days in the tidal delta. There was a corresponding increase in growth rate as the fish migrated from freshwater (FW) to tidal delta to nearshore (NS) habitats. Fish grew 33 percent faster in the tidal delta than in FW habitat and slightly faster (14 percent) in the delta flats (DF) habitat compared to the tidal delta.
NASA Astrophysics Data System (ADS)
Bergman, Ramona; Andersson-Sköld, Yvonne; Nyberg, Lars; Johansson, Magnus
2010-05-01
In a project funded by the Swedish Civil Contingencies Agency, the effort and work to reduce different kinds of accidents are being evaluated. The project wants to illuminate the links between actions and outcome, so we can learn from today's performance and in the future select more effective measures and overall deal with accidents more efficiently. The project ESS covers the field of frequent accidents such as sliding accidents at home, in house fires and less common accidents such as chemical and land fill accidents up to even more rare accidents such as natural accidents and hazards. In the ESS project SGI (Swedish geotechnical institute) will evaluate the work and effort concerning various natural hazards limited to landslides, erosion and flooding. The aim is to investigate how municipalities handle, especially prevention, of such natural disasters today. The project includes several aspects such as: • which are the driving forces for risk analysis in a municipality • do one use risk mapping (and what type) in municipal risk analysis • which aspects are most important when selecting preventive measures • in which way do one learn from past accidents • and from previous accidents elsewhere, by for example use existing databases • etc There are many aspects that play a role in a well-functioning safety promotion work. The overall goal is to examine present work and activities, highlight what is well functioning and identify weak points. The aim is to find out where more resources are needed and give suggestions for a more efficient security work. This includes identification of the most efficient "tools" in use or needed. Such tools can be education, directives, funding, more easily available maps and information regarding previous accidents and preventive measures etc. The project will result in recommendations for more effective ways to deal with landslides, erosion and flooding. Since different kinds of problems can occur depending on level of authority the investigation of the security work will be done with authorities on both regional and local scale. At the moment the investigation process are in progress and preliminary results will be presented.
Transient thermal stresses of work roll by coupled thermoelasticity
NASA Astrophysics Data System (ADS)
Lai, W. B.; Chen, T. C.; Weng, C. I.
1991-01-01
A numerical method, based on a two-dimensional plane strain model, is developed to predict the transient responses (that include distributions of temperature, thermal deformation, and thermal stress) of work roll during strip rolling by coupled thermoelasticity. The method consists of discretizing the space domain of the problem by finite element method first, and then treating the time domain by implicit time integration techniques. In order to avoid the difficulty in analysis due to relative movement between work roll and its thermal boundary, the energy equation is formulated with respect to a fixed Eulerian reference frame. The effect of thermoelastic coupling term, that is generally disregarded in strip rolling, can be considered and assessed. The influences of some important process parameters, such as rotational speed of the roll and intensity of heat flux, on transient solutions are also included and discussed. Furthermore, since the stress history at any point of the roll in both transient and steady state could be accurately evaluated, it is available to perform the analysis of thermal fatigue for the roll by means of previous data.
The interpersonal work of dental conscious sedation: A qualitative analysis.
Woolley, Stephen M; Chadwick, Barbara; Pugsley, Lesley
2017-08-01
Whilst there is a considerable body of literature examining the pharmacology of conscious sedation, the social tasks required to successfully provide conscious sedation have not been reported. This paper discusses data regarding the interpersonal work integral to effective conscious sedation provision, from a larger qualitative study exploring how patients and clinicians engage with secondary care conscious sedation provided within the UK. Semi-structured interviews were conducted with 13 conscious sedation providers and nine patients within UK-based secondary care sedation settings. Digital audio-recordings were transcribed verbatim and subsequently analysed using a constant comparative method within NVivo Data Analysis Software. Four main themes of interpersonal work were reported by participants: displaying care, containing emotions, demonstrating competence and maximizing the effect. This study shows that performing conscious sedation requires more than technical delivery, and involves the projection of attributes in a literal "performance." The importance of managing outward emotional appearance reflects previous dental research. The need to manage outward appearance, and the emotional impact this has, is of relevance to all clinicians. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Joseph, Gillian M; Skinner, Mark W; Yantzi, Nicole M
2013-08-01
This paper addresses the gap in health services and policy research about the implications of everyday weather for health care work. Building on previous research on the weather-related challenges of caregiving in homes and communities, it examines the experiences of 'seasonal bad weather' for health care workers in long-term care institutions. It features a hermeneutic phenomenology analysis of six transcripts from interviews with nurses and personal support workers from a qualitative study of institutional long-term care work in rural Canada. Focussing on van Manen's existential themes of lived experience (body, relations, space, time), the analysis reveals important contradictions between the lived experiences of health care workers coping with bad weather and long-term care policies and practices that mitigate weather-related risk and vulnerability. The findings contribute to the growing concern for rural health issues particularly the neglected experiences of rural health providers and, in doing so, offer insight into the recent call for greater attention to the geographies of health care work. Copyright © 2012 Elsevier Ltd. All rights reserved.
Kermansaravi, Fatihe; Navidian, Ali; Rigi, Shahindokht Navabi; Yaghoubinia, Fariba
2015-01-01
Background: Quality of work life is one of the most important factors for human motivating and improving of job satisfaction. Aim: The current study was carried out aimed to determine the relationship between quality of work life and job satisfaction in faculty members of Zahedan University of Medical Sciences. Method: In this descriptive-analytic study, 202 faculty members of Zahedan University of Medical Sciences in 2012 were entered the study through census. The job satisfaction questionnaire of Smith and Kendall and Walton Quality of Work Life questionnaire were used for data collection. Validity and reliability of questionnaires were confirmed in previous studies. Data analysis was done using SPSS 18. The Pearson correlation coefficient and multiple regression tests were used for data analysis. Result: The mean score of quality of work life was 121/30±37/08 and job satisfaction was 135/98±33/78. There was a significant and positive correlation between job satisfaction of faculty members and their quality of work life (P=0.003). In addition, two components of quality of work life “adequate and fair compensation” (β=0.3) and “Social Integration” (β=0.4) can predict job satisfaction of faculty members. Conclusion: According to correlation between job satisfaction and quality of work life in faculty members, job satisfaction can be improved through the changing and manipulating the components of quality of work life and in this way; the suitable environment for organization development should be provided. PMID:25716392
Long working hours and overweight and obesity in working adults.
Kim, Byung-Mi; Lee, Bo-Eun; Park, Hye-Sook; Kim, Young-Ju; Suh, Young-Ju; Kim, Jeong-Youn; Shin, Ji-Young; Ha, Eun-Hee
2016-01-01
Previous studies have identified a link between gender and the various risk factors associated with obesity. We examined obesity risk factors in working adults to identify the effects of differences in body mass index (BMI) and percentage body fat (PBF) between women and men. A total of 1,120 adults agreed to participate in the study. Data from 711 participants, including 411 women and 300 men, were analyzed. Multiple logistic regression analysis was used to estimate the effects of risk factors on obesity and being overweight. In addition, the least-squares (LS) means of both BMI and PBF were estimated by analysis of covariance (ANCOVA) in a generalized linear model. Increases in BMI and PBF were significantly related to an age > 50 years and long working hours in women after compensating for confounding factors. Using the PBF criterion, the odds ratio (OR) of being overweight or obese in women > 50 years of age who worked for > 9 h a day was 3.9 (95% confidence interval [CI], 1.05-11.00). For BMI, women who were > 50 years of age and worked for > 9 h a day were 3.82 times (95% CI, 1.31-11.14) more likely to be overweight or obese than those who were < 50 years of age and worked for < 9 h a day. Obesity in working adults was associated with > 50 years of age and long working hours in women. Further studies are needed to investigate the underlying mechanisms of this relationship and its potential implications for the prevention and management of excess weight and obesity.
Scaling Analysis of Alloy Solidification and Fluid Flow in a Rectangular Cavity
NASA Astrophysics Data System (ADS)
Plotkowski, A.; Fezi, K.; Krane, M. J. M.
A scaling analysis was performed to predict trends in alloy solidification in a side-cooled rectangular cavity. The governing equations for energy and momentum were scaled in order to determine the dependence of various aspects of solidification on the process parameters for a uniform initial temperature and an isothermal boundary condition. This work improved on previous analyses by adding considerations for the cooling bulk fluid flow. The analysis predicted the time required to extinguish the superheat, the maximum local solidification time, and the total solidification time. The results were compared to a numerical simulation for a Al-4.5 wt.% Cu alloy with various initial and boundary conditions. Good agreement was found between the simulation results and the trends predicted by the scaling analysis.
[Morphometric analysis of lymphocyte nuclei in chronic lymphocytic leukemia].
Ostapenko, V A; Kruchinskiĭ, N G; Smirnova, L A; Cherednik, A B; Nesterov, V N; Tepliakov, A I
1994-01-01
This work is dedicated to the study of use of quantitative analysis of cell nucleus structure for the analysis of peripheral blood lymphocytes in patients with chronic lymphocytic leukaemia. The structure of lymphocytic nuclei of healthy donors was evaluated by means of staining by toluidine blue purified cell suspensions smears. The preparations were analysed on the television measuring system "omnicon" with measurements of the following parameters: square of the nucleus, euchromatin, heterochromatin, and the ratio of heterochromatin and euchromatin squares. Actuarial analysis and nuclei classification of the previously mentioned parameters showed, that in peripheral blood of patients with chronic lymphocytic leukemia a large amount of atypical lymphocytes is present with reduced nucleus sizes. Atypical cells retain the ratio of structural components of chromatine, characteristic to normal cells, which show their low proliferative activity.
Job satisfaction in nursing: a concept analysis study.
Liu, Y; Aungsuroch, Y; Yunibhand, J
2016-03-01
This study aims to undertake a concept analysis of job satisfaction in the nursing profession. Around current global shortage of nurses, it is important to stabilize the nursing workforce. Nurses' job satisfaction has been found to be related to intention to leave. In the nursing profession, there is a lack of evidence to support the attributes of nurses' job satisfaction. Walker and Avant's approach of concept analysis was used. The main attributes of job satisfaction from this study are (1) fulfillment of desired needs within the work settings, (2) happiness or gratifying emotional responses towards working conditions, and (3) job value or equity. These attributes are influenced by antecedent conditions like demographic, emotional, work characteristics and environmental variables. Additionally, the consequences of nurses' job satisfaction have a significant impact on both nurses and patients. This study integrated both the content and process of motivational theories to generate the attributes of job satisfaction in nursing that overcome the limitation of the previous studies, which looked only at the definitions of nurses' job satisfaction based on content motivational theories. The findings of this study can facilitate both nursing researchers to develop a cultural adaption instrument and policy makers to improve clinical nursing practice. This analysis provides nurse managers with a new perspective to deal with nurses' job satisfaction by taking into account all the attributes that influence it in the nursing field. © 2015 International Council of Nurses.
Gender Differences and Styles in the Use of Digital Games
ERIC Educational Resources Information Center
Bonanno, Philip; Kommers, P. A. M.
2005-01-01
This paper reports work in progress investigating gender differences and styles in the use of digital games amongst advanced level biology students. It is an elaboration on previous work exploring the relationship between cognitive style and academic performance in Maltese students taking biology at advanced level. In this previous work the…
Baek, Kiook; Yang, Seonhee; Lee, Miyoung; Chung, Insung
2018-06-01
Many studies have reported negative psychological or physical effects of emotional labor. Relationship between work-related musculoskeletal disorder and psychosocial factors has been reported. To manage organizational and psychosocial factors of musculoskeletal disorder with work place intervention among emotional laborers, the factors contributing to musculoskeletal pain must be identified and clarified. Data from the fourth Korean Working Conditions Survey was analyzed. Based on the questionnaire, we selected emotional laborers and included 3,979 participants, excluding participants whose variables were of interest to the researcher. Weight variable was applied. The association with musculoskeletal pain and psychosocial factors, such as workload, monotonous work, job control, social support, and job satisfaction, was investigated. Univariate analysis demonstrated that there was a statistically significant relationship between social support, job satisfaction, and musculoskeletal pain. In multivariate analysis, job satisfaction showed a strong correlation with musculoskeletal pain at all sites. Social support was significantly associated with backache. Monotonous work seemed to reduce the pain in the neck and/or upper limbs. Job control and work intensity were not significantly associated with musculoskeletal pain. In this study, job satisfaction was significantly associated with musculoskeletal pain, and social support among the social psychological stressors could reduce musculoskeletal pain. However, unlike previously known, the presence of monotonous work resulted in reduced musculoskeletal pain. The results of this study will help to establish the direction of improvement of atmosphere in the workplace to prevent the musculoskeletal pain of emotional laborers.
Pańczak, Anna; Pietkiewicz, Igor
2016-01-01
Having the opportunity to work has been found meaningful for individuals suffering from severe mental illness, in order to boost their self-esteem, provide a sense of control over their lives and of belonging to a community. There are no studies in Polish literature on the process of recovery from schizophrenia with reference to work activity. The objective of this research was to explore personal experiences of people employed in Vocational Development Centers. Eight semi-structured interviews were conducted with adult patients. Their transcripts were subject to interpretative phenomenological analysis (IPA). Having the opportunity to work was significant for participants because it mobilized them and encouraged self-care. G oing to work helped them overcome social isolation by meeting people with similar difficulties and those who did not suffer from mental illness. Financial gratification enables a sense of independence and the ability to develop skills to plan and control their budget. This study finds that patients who lost their jobs due to mental illness should be encouraged to utilize rehabilitation institutions to help them undertake work activity and use previously acquired qualifications or develop new skills. Access to appropriate psychological support should be provided during vocation reorientation and adaptation into new work environments. This helps patients regain a sense of control and purpose, and cope with losing valued social roles. We also highlight the need for further studies into challenges in the workplace and the strategies patients use to cope with them.
NASA Astrophysics Data System (ADS)
Koliopanos, Filippos; Vasilopoulos, Georgios
2018-06-01
Aims: We study the temporal and spectral characteristics of SMC X-3 during its recent (2016) outburst to probe accretion onto highly magnetized neutron stars (NSs) at the Eddington limit. Methods: We obtained XMM-Newton observations of SMC X-3 and combined them with long-term observations by Swift. We performed a detailed analysis of the temporal and spectral behavior of the source, as well as its short- and long-term evolution. We have also constructed a simple toy-model (based on robust theoretical predictions) in order to gain insight into the complex emission pattern of SMC X-3. Results: We confirm the pulse period of the system that has been derived by previous works and note that the pulse has a complex three-peak shape. We find that the pulsed emission is dominated by hard photons, while at energies below 1 keV, the emission does not pulsate. We furthermore find that the shape of the pulse profile and the short- and long-term evolution of the source light-curve can be explained by invoking a combination of a "fan" and a "polar" beam. The results of our temporal study are supported by our spectroscopic analysis, which reveals a two-component emission, comprised of a hard power law and a soft thermal component. We find that the latter produces the bulk of the non-pulsating emission and is most likely the result of reprocessing the primary hard emission by optically thick material that partly obscures the central source. We also detect strong emission lines from highly ionized metals. The strength of the emission lines strongly depends on the phase. Conclusions: Our findings are in agreement with previous works. The energy and temporal evolution as well as the shape of the pulse profile and the long-term spectra evolution of the source are consistent with the expected emission pattern of the accretion column in the super-critical regime, while the large reprocessing region is consistent with the analysis of previously studied X-ray pulsars observed at high accretion rates. This reprocessing region is consistent with recently proposed theoretical and observational works that suggested that highly magnetized NSs occupy a considerable fraction of ultraluminous X-ray sources.
Lightweight and Statistical Techniques for Petascale PetaScale Debugging
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miller, Barton
2014-06-30
This project investigated novel techniques for debugging scientific applications on petascale architectures. In particular, we developed lightweight tools that narrow the problem space when bugs are encountered. We also developed techniques that either limit the number of tasks and the code regions to which a developer must apply a traditional debugger or that apply statistical techniques to provide direct suggestions of the location and type of error. We extend previous work on the Stack Trace Analysis Tool (STAT), that has already demonstrated scalability to over one hundred thousand MPI tasks. We also extended statistical techniques developed to isolate programming errorsmore » in widely used sequential or threaded applications in the Cooperative Bug Isolation (CBI) project to large scale parallel applications. Overall, our research substantially improved productivity on petascale platforms through a tool set for debugging that complements existing commercial tools. Previously, Office Of Science application developers relied either on primitive manual debugging techniques based on printf or they use tools, such as TotalView, that do not scale beyond a few thousand processors. However, bugs often arise at scale and substantial effort and computation cycles are wasted in either reproducing the problem in a smaller run that can be analyzed with the traditional tools or in repeated runs at scale that use the primitive techniques. New techniques that work at scale and automate the process of identifying the root cause of errors were needed. These techniques significantly reduced the time spent debugging petascale applications, thus leading to a greater overall amount of time for application scientists to pursue the scientific objectives for which the systems are purchased. We developed a new paradigm for debugging at scale: techniques that reduced the debugging scenario to a scale suitable for traditional debuggers, e.g., by narrowing the search for the root-cause analysis to a small set of nodes or by identifying equivalence classes of nodes and sampling our debug targets from them. We implemented these techniques as lightweight tools that efficiently work on the full scale of the target machine. We explored four lightweight debugging refinements: generic classification parameters, such as stack traces, application-specific classification parameters, such as global variables, statistical data acquisition techniques and machine learning based approaches to perform root cause analysis. Work done under this project can be divided into two categories, new algorithms and techniques for scalable debugging, and foundation infrastructure work on our MRNet multicast-reduction framework for scalability, and Dyninst binary analysis and instrumentation toolkits.« less
A young person's game: immersion and distancing in bar work.
Conway, Thomas; MacNeela, Pádraig
2012-01-01
Previous research indicates that bar workers report high levels of alcohol consumption, but the bar work experience itself has been little studied as a means to understand health threats associated with this job role. The subjective experience and meaning of bar work was explored in this study by interviewing current and ex-bar workers from a district in an Irish city that had a high density of bars and busy tourism industry. A total of 12 participants took part in focus groups (FGs) and seven in individual interviews. Four themes were identified in a thematic analysis. The central depiction of bar work was of an initial immersion in an intensive lifestyle characterised by heavy drinking, with subsequent distancing from the extremes of the lifestyle. The participants affiliated strongly with the bar work occupational identity, which included alcohol use in group scenarios for drinking during work, after work and on time off. The bar work lifestyle was most intense in the 'superpub' environment, characterised by permissive staff drinking norms and reported stress. Although an important identity, bar work was ultimately a transient role. The findings are considered in relation to research on occupation-specific stress and alcohol use, social identity and developmental needs in young adulthood.
In search of a representative sample of residential building work.
Lobb, Brenda; Woods, Gregory R
2012-09-01
Most research investigating injuries in construction work is limited by reliance on work samples unrepresentative of the multiple, variable-cycle tasks involved, resulting in incomplete characterisation of ergonomic exposures. In this case study, a participatory approach was used including hierarchical task analysis and site observations of a typical team of house builders in New Zealand, over several working days, to obtain a representative work sample. The builders' work consisted of 14 goal-defined jobs using varying subsets of 15 task types, each taking from less than 1 s to more than 1 h and performed in a variety of postures. Task type and duration varied within and between participants and days, although all participants spent at least 25% of the time moving from place to place, mostly carrying materials, and more than half the time either reaching up or bending down to work. This research has provided a description of residential building work based on a work sample more nearly representative than those previously published and has demonstrated a simple, low-cost but robust field observation method that can provide a valid basis for further study of hazard exposures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.
The discovery of the causes of leprosy: A computational analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Corruble, V.; Ganascia, J.G.
1996-12-31
The role played by the inductive inference has been studied extensively in the field of Scientific Discovery. The work presented here tackles the problem of induction in medical research. The discovery of the causes of leprosy is analyzed and simulated using computational means. An inductive algorithm is proposed, which is successful in simulating some essential steps in the progress of the understanding of the disease. It also allows us to simulate the false reasoning of previous centuries through the introduction of some medical a priori inherited form archaic medicine. Corroborating previous research, this problem illustrates the importance of the socialmore » and cultural environment on the way the inductive inference is performed in medicine.« less
Meta-analysis of the relationship between TQM and Business Performance
NASA Astrophysics Data System (ADS)
F, Ahmad M.; N, Zakuan; A, Jusoh; Z, Tasir; J, Takala
2013-06-01
Meta-analysis has been conducted based on 20 previous works from 4,040 firms at 16 countries from Asia, Europe and America. Throughout this paper a meta-analysis, this paper reviews the relationships between TQM and business performance amongst the regions. Meta-analysis result concludes that the average of rc is 0.47; Asia (rc=0.54), America (rc=0.43) and Europe (rc=0.38). The analysis also shows that Asia developed countries have greatest impact of TQM (rc=0.56). However, the analysis of ANOVA and t-test show that there is no significant difference amongst type of country (developed and developing countries) and regions at p=0.05. In addition, the average result of rc2 is 0.24; Asia (rc2=0.33), America (rc2=0.22) and Europe (rc2=0.15). Meanwhile, rc2 in developing countries (rc2=0.28) are higher than developed countries (rc2=0.21).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Borde, Amy B.; Cullinan, Valerie I.; Diefenderfer, Heida L.
The Reference Site (RS) study is part of the research, monitoring, and evaluation (RME) effort developed by the Action Agencies (Bonneville Power Administration [BPA], U.S. Army Corps of Engineers, Portland District [USACE], and U.S. Bureau of Reclamation) in response to Federal Columbia River Power System (FCRPS) Biological Opinions (BiOp). While the RS study was initiated in 2007, data have been collected at relatively undisturbed reference wetland sites in the LCRE by PNNL and collaborators since 2005. These data on habitat structural metrics were previously summarized to provide baseline characterization of 51 wetlands throughout the estuarine and tidal freshwater portions ofmore » the 235-km LCRE; however, further analysis of these data has been limited. Therefore, in 2011, we conducted additional analyses of existing field data previously collected for the Columbia Estuary Ecosystem Restoration Program (CEERP) - including data collected by PNNL and others - to help inform the multi-agency restoration planning and ecosystem management work underway in the LCRE.« less
An improved method of measuring heart rate using a webcam
NASA Astrophysics Data System (ADS)
Liu, Yi; Ouyang, Jianfei; Yan, Yonggang
2014-09-01
Measuring heart rate traditionally requires special equipment and physical contact with the subject. Reliable non-contact and low-cost measurements are highly desirable for convenient and comfortable physiological self-assessment. Previous work has shown that consumer-grade cameras can provide useful signals for remote heart rate measurements. In this paper a simple and robust method of measuring the heart rate using low-cost webcam is proposed. Blood volume pulse is extracted by proper Region of Interest (ROI) and color channel selection from image sequences of human faces without complex computation. Heart rate is subsequently quantified by spectrum analysis. The method is successfully applied under natural lighting conditions. Results of experiments show that it takes less time, is much simpler, and has similar accuracy to the previously published and widely used method of Independent Component Analysis (ICA). Benefitting from non-contact, convenience, and low-costs, it provides great promise for popularization of home healthcare and can further be applied to biomedical research.
Preferential sites for InAsP/InP quantum wire nucleation using molecular dynamics
NASA Astrophysics Data System (ADS)
Nuñez-Moraleda, Bernardo; Pizarro, Joaquin; Guerrero, Elisa; Guerrero-Lebrero, Maria P.; Yáñez, Andres; Molina, Sergio Ignacio; Galindo, Pedro Luis
2014-11-01
In this paper, stress fields at the surface of the capping layer of self-assembled InAsP quantum wires grown on an InP (001) substrate have been determined from atomistic models using molecular dynamics and Stillinger-Weber potentials. To carry out these calculations, the quantum wire compositional distribution was extracted from previous works, where the As and P distributions were determined by electron energy loss spectroscopy and high-resolution aberration-corrected Z-contrast imaging. Preferential sites for the nucleation of wires on the surface of the capping layer were studied and compared with (i) previous simulations using finite element analysis to solve anisotropic elastic theory equations and (ii) experimentally measured locations of stacked wires. Preferential nucleation sites of stacked wires were determined by the maximum stress location at the MD model surface in good agreement with experimental results and those derived from finite element analysis. This indicates that MD simulations based on empirical potentials provide a suitable and flexible tool to study strain dependent atom processes.
The Lag-Luminosity Relation in the GRB Source Frame: An Investigation with Swift BAT Bursts
NASA Technical Reports Server (NTRS)
Ukwatta, T. N.; Dhuga, K. S.; Stamatikos, M.; Dermer, C. D.; Sakamoto, T.; Sonbas, E.; Parke, W. C.; Maximon, L. C.; Linnemann, J. T.; Bhat, P. N.;
2011-01-01
Spectral lag. which is defined as the difference in time of arrival of high- and low-energy photons. is a common feature in gamma-ray bursts (GRBs). Previous investigations have shown a correlation between this lag and the isotropic peak luminosity for long duration bursts. However. most of the previous investigations used lags extracted in the observer frame only. In this work (based on a sample of 43 Swift long GRBs with known redshifts). we present an analysis of the lag-luminosity relation in the GRB source frame. Our analysis indicates a higher degree of correlation -0.82 +/- 0.05 (chance probability of approx. 5.5 x 10(exp -5) between the spectral lag and the isotropic peak luminosity, L(sub iso). with a best-fitting power-law index of -1.2 +/- 0.2. In addition, there is an anticorrelation between the source-frame spectral lag and the source-frame peak energy of the burst spectrum.
NASA Astrophysics Data System (ADS)
Rothman, Stephen; Edwards, Rhys; Vogler, Tracy J.; Furnish, M. D.
2012-03-01
Velocity-time histories of free- or windowed-surfaces have been used to calculate wave speeds and hence deduce the shear moduli for materials at high pressure. This is important to high velocity impact phenomena, e.g. shaped-charge jets, long rod penetrators, and other projectile/armour interactions. Historically the shock overtake method has required several experiments with different depths of material to account for the effect of the surface on the arrival time of the release. A characteristics method, previously used for analysis of isentropic compression experiments, has been modified to account for the effect of the surface interactions, thus only one depth of material is required. This analysis has been applied to symmetric copper impacts performed at Sandia National Laboratory's Star Facility. A shear modulus of 200GPa, at a pressure of ~180GPa, has been estimated. These results are in broad agreement with previous work by Hayes et al.
NASA Astrophysics Data System (ADS)
Rothman, Stephen; Edwards, Rhys; Vogler, Tracy; Furnish, Mike
2011-06-01
Velocity-time histories of free- or windowed-surfaces have been used to calculate wave speeds and hence deduce the shear modulus for materials at high pressure. This is important to high velocity impact phenomena, e.g. shaped-charge jets, long rod penetrators, and other projectile/armour interactions. Historically the shock overtake method has required several experiments with different depths of material to account for the effect of the surface on the arrival time of the release. A characteristics method, previously used for analysis of isentropic compression experiments, has been modified to account for the effect of the surface interactions, thus only one depth of material is required. This analysis has been applied to symmetric copper impacts performed at Sandia National Laboratory's Star Facility. A shear modulus of 200Gpa, at a pressure of ~180GPa, has been estimated. These results are in broad agreement with previous work by Hayes et al.
Upgrade Summer Severe Weather Tool in MIDDS
NASA Technical Reports Server (NTRS)
Wheeler, Mark M.
2010-01-01
The goal of this task was to upgrade the severe weather database from the previous phase by adding weather observations from the years 2004 - 2009, re-analyze the data to determine the important parameters, make adjustments to the index weights depending on the analysis results, and update the MIDDS GUI. The added data increased the period of record from 15 to 21 years. Data sources included local forecast rules, archived sounding data, surface and upper air maps, and two severe weather event databases covering east-central Florida. Four of the stability indices showed increased severe weather predication. The Total Threat Score (TTS) of the previous work was verified for the warm season of 2009 with very good skill. The TTS Probability of Detection (POD) was 88% and the False alarm rate (FAR) of 8%. Based on the results of the analyses, the MIDDS Severe Weather Worksheet GUI was updated to assist the duty forecaster by providing a level of objective guidance based on the analysis of the stability parameters and synoptic-scale dynamics.
THE SPIN OF THE BLACK HOLE 4U 1543-47
DOE Office of Scientific and Technical Information (OSTI.GOV)
Morningstar, Warren R.; Miller, Jon M., E-mail: wmorning@umich.edu, E-mail: jonmm@umich.edu
2014-10-01
We present a new analysis of Rossi X-Ray Timing Explorer observations of the 2002 outburst of the transient X-ray nova 4U 1543-47. We focus on observations in the high/soft state, and attempt to measure the ''spin'' of the black hole by simultaneously fitting the thermal disk continuum and by modeling the broadened iron k-shell emission lines and additional blurred reflection features. Previous works have found that use of these methods individually returns contradictory values for the dimensionless spin parameter a {sub *} = cJ/GM {sup 2}. We find that when used in conjunction with each other, a moderate spin ismore » obtained (a{sub ∗}=0.43{sub −0.31}{sup +0.22}) that is actually consistent with both other values within errors. We discuss limitations of our analysis, systematic uncertainties, and implications of this measurement, and compare our result to those previously claimed for 4U 1543-47.« less
Adaptive power priors with empirical Bayes for clinical trials.
Gravestock, Isaac; Held, Leonhard
2017-09-01
Incorporating historical information into the design and analysis of a new clinical trial has been the subject of much discussion as a way to increase the feasibility of trials in situations where patients are difficult to recruit. The best method to include this data is not yet clear, especially in the case when few historical studies are available. This paper looks at the power prior technique afresh in a binomial setting and examines some previously unexamined properties, such as Box P values, bias, and coverage. Additionally, it proposes an empirical Bayes-type approach to estimating the prior weight parameter by marginal likelihood. This estimate has advantages over previously criticised methods in that it varies commensurably with differences in the historical and current data and can choose weights near 1 when the data are similar enough. Fully Bayesian approaches are also considered. An analysis of the operating characteristics shows that the adaptive methods work well and that the various approaches have different strengths and weaknesses. Copyright © 2017 John Wiley & Sons, Ltd.
Magnesium replacement in formaldehyde: Theoretical rovibrational analysis of X ∼ 3B1 MgCH2
NASA Astrophysics Data System (ADS)
Bassett, Matthew K.; Fortenberry, Ryan C.
2018-02-01
A full, anharmonic set of fundamental vibrational frequencies as well as spectrosocpic constants are provided at high-level for X ∼ 3B1 MgCH2 for the first time. The present data are in line with previous computational and Ar-matrix results, but the anharmonic data show that two brightest frequencies, ν4 and ν5 , are nearly coincident with one another at 560 cm-1. Hence, this area is the best spectral region to search for signatures of this molecule. The rotational constants are also provided indicating a near-prolate rotational progression which should aid in microwave/millimeter-wave analysis of this molecule. Magnesium is known to be a significant component of the Earth, and molecules containing it may be more common in the interstellar medium/circumstellar media than previously thought. More spectral characterization of such molecules like MgCH2 should be undertaken, and this work is a step in that direction.
Photoactivable caps for reactive metal nanoparticles
NASA Astrophysics Data System (ADS)
Patel, Ashish
The synthesis and stabilization of reactive metal nanoparticles is often challenging under normal atmospheric conditions. This problem can be alleviated by capping and passivation. Our lab has focused on forming polymer coatings on the surface of reactive metal nanoparticles. We discovered a convenient and effective route for stabilization of aluminum nanoparticles (Al NPs), which uses the nascent metal core as a polymerization initiator for various organic monomers. In our previous work, we used this method to passivate the Al NPs using variety of epoxides and copolymers of epoxides and alkenes. These products have demonstrated air stability for weeks to months with little to no degradation in the active Al content. Since our previously synthesized Al NP's were not beneficial for rapid and efficient thermodynamic access to the active Al core, our goal was find polymers that could easily be photochemically activated to enhance such access. Since poly(methyl methacrylate) (PMMA) has photodegrading properties, we used PMMA as a capping agent to passivate Al NPs. In this work, we present capping and stabilization of Al NPs with PMMA, and also with 1,2-epoxyhexane/ PMMA. In our previous work, we increased the stability of Al NP capped with 1,2-epoxy-9-decene by adding 1,13-tetradecadiene as a cross-linker. Here, we used the methyl methacrylate (MMA) monomer as cross-linker for Al NP capped with 1,2-epoxy-9-decene. We have also used the MMA as capping agent. We use powder x-ray diffractametry (PXRD), differential scanning calorimetry (DSC), and thermogravity analysis (TGA) to confirm the presence of elemental Al and ATR-FTIR to confirm the presence of polymers.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-16
.... FMCSA used a look-up table for scaling the individual hours of work in the previous week. Look-up tables...). Column C (cells C93-137) presents the values scaled to our average work (52 hours per week of work) and... Evaluation to link the hours worked in the previous week to fatigue the following week. On January 28, 2011...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Geveci, Berk
The purpose of the SDAV institute is to provide tools and expertise in scientific data management, analysis, and visualization to DOE’s application scientists. Our goal is to actively work with application teams to assist them in achieving breakthrough science, and to provide technical solutions in the data management, analysis, and visualization regimes that are broadly used by the computational science community. Over the last 5 years members of our institute worked directly with application scientists and DOE leadership-class facilities to assist them by applying the best tools and technologies at our disposal. We also enhanced our tools based on inputmore » from scientists on their needs. Many of the applications we have been working with are based on connections with scientists established in previous years. However, we contacted additional scientists though our outreach activities, as well as engaging application teams running on leading DOE computing systems. Our approach is to employ an evolutionary development and deployment process: first considering the application of existing tools, followed by the customization necessary for each particular application, and then the deployment in real frameworks and infrastructures. The institute is organized into three areas, each with area leaders, who keep track of progress, engagement of application scientists, and results. The areas are: (1) Data Management, (2) Data Analysis, and (3) Visualization. Kitware has been involved in the Visualization area. This report covers Kitware’s contributions over the last 5 years (February 2012 – February 2017). For details on the work performed by the SDAV institute as a whole, please see the SDAV final report.« less
Perez-Brumer, Amaya G; Oldenburg, Catherine E; Reisner, Sari L; Clark, Jesse L; Parker, Richard G
2016-01-01
The HIV epidemic has had a widespread impact on global scientific and cultural discourses related to gender, sexuality, and identity. 'Male sex workers' have been identified as a 'key population' in the global HIV epidemic; however, there are methodological and conceptual challenges for defining inclusion and exclusion of transgender women within this group. To assess these potential implications, this study employs self-critique and reflection to grapple with the empiric and conceptual implications of shifting understandings of sexuality and gender within the externally re-created etic category of 'MSM' and 'transgender women' in epidemiologic HIV research. We conducted a sensitivity analysis of our previously published meta-analysis which aimed to identify the scope of peer-reviewed articles assessing HIV prevalence among male sex workers globally between 2004 and 2013. The inclusion of four studies previously excluded due to non-differentiation of cisgender male from transgender women participants (studies from Spain, Thailand, India, and Brazil: 421 total participants) increased the overall estimate of global HIV prevalence among 'men' who engage in sex work from 10.5% (95% CI 9.4-11.5%) to 10.8% (95% CI 9.8-11.8%). The combination of social science critique with empiric epidemiologic analysis represents a first step in defining and operationalising 'reflexive epidemiology'. Grounded in the context of sex work and HIV prevention, this paper highlights the multiplicity of genders and sexualities across a range of social and cultural settings, limitations of existing categories (i.e. 'MSM', 'transgender'), and their global implications for epidemiologic estimates of HIV prevalence.
A High-Order Transport Scheme for Collisional-Radiative and Nonequilibrium Plasma
2009-02-06
of change of the temperature is obtained, ∂E ∂T ∂T ∂t = ∂ ∂x ( κs ∂T ∂x ) (7.6) Assuming a one- dimensional discretization on a uniformly- spaced ...oscillations nor a quantitative analysis of the multi- dimensional shock structure has been provided to date. This dissertation builds upon previous...high-enthalpy nonequilibrium plasmas and is the focus of much of this work. The plasma is described as
DOE Office of Scientific and Technical Information (OSTI.GOV)
Szymanski, J.J.; Amann, J.F.; Baker, K.
The MEGA experiment is designed to search for the rare decay {mu}{r_arrow}{ital e}{gamma} with a branching ratio sensitivity of {similar_to}5{times}10{sup {minus}13}. Production data have been taken during 1992 and 1993, and the detector is working as expected. Following a complete analysis, the present data set should represent an improvement of 12--15 in sensitivity over the previous limit of {mu}{r_arrow}{ital e}{gamma}. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}.
Computer Aided Detection of Microcalcifications Utilizing Texture Analysis
1995-12-01
encouraging results using features derived from the first moment of the power spectrum of the region[13]. Chitre, et al. and Kocur have made use of...are largely concentrated around the main diagonal. For the example C matrix in Figure 3.11, the ASM value is 0.0972. Previous work by Kocur [17] and...Patterson AFB OH, 1994. BIB-1 16. Hoffmeister, Jeffery W. Personal interviews, May-Nov 1995. Aerospace Physician. AL/CFHV, Wright-Patterson AFB,OH. 17. Kocur
Gunshot identification system by integration of open source consumer electronics
NASA Astrophysics Data System (ADS)
López R., Juan Manuel; Marulanda B., Jose Ignacio
2014-05-01
This work presents a prototype of low-cost gunshots identification system that uses consumer electronics in order to ensure the existence of gunshots and then classify it according to a previously established database. The implementation of this tool in the urban areas is to set records that support the forensics, hence improving law enforcement also on developing countries. An analysis of its effectiveness is presented in comparison with theoretical results obtained with numerical simulations.
2008-07-07
from normal. Comparison with past measurement results are made where possible. I. Nomenclature As = sensor area of QCM E = beam ion...use a combination of weight-loss and QCM deposition sensor and builds upon our previous work 5-7, 9- 10 . In Section III we summarize our experimental...containing the surface normal and the incident ion directions). E. QCM Sensor and Signal Analysis In deposition mode, the QCM allows
Multi-Frequency Analysis for Landmine Detection with Forward-Looking Ground Penetrating Radar
2010-10-12
CIEXYZ tristimulus values of the red, green, and blue primaries and the white point defining the RGB images‟ color gamut , and the illuminant under...distance in CIELAB color space for the color imagery and Euclidean distance between grey levels for the IR imagery. Use of CIELAB color space was...motivated by its superior perceptual uniformity compared to RGB and slight illuminant invariance, as explained in our previous work. Use of CIELAB color
A Structural Characterization of Temporal Dynamic Controllability
NASA Technical Reports Server (NTRS)
Morris, Paul
2006-01-01
An important issue for temporal planners is the ability to handle temporal uncertainty. Recent papers have addressed the question of how to tell whether a temporal network is Dynamically Controllable, i.e., whether the temporal requirements are feasible in the light of uncertain durations of some processes. Previous work has presented an O(N5) algorithm for testing this property. Here, we introduce a new analysis of temporal cycles that leads to an O(N4) algorithm.
Integrating TV/digital data spectrograph system
NASA Technical Reports Server (NTRS)
Duncan, B. J.; Fay, T. D.; Miller, E. R.; Wamsteker, W.; Brown, R. M.; Neely, P. L.
1975-01-01
A 25-mm vidicon camera was previously modified to allow operation in an integration mode for low-light-level astronomical work. The camera was then mated to a low-dispersion spectrograph for obtaining spectral information in the 400 to 750 nm range. A high speed digital video image system was utilized to digitize the analog video signal, place the information directly into computer-type memory, and record data on digital magnetic tape for permanent storage and subsequent analysis.
Effects of biases in domain wall network evolution. II. Quantitative analysis
NASA Astrophysics Data System (ADS)
Correia, J. R. C. C. C.; Leite, I. S. C. R.; Martins, C. J. A. P.
2018-04-01
Domain walls form at phase transitions which break discrete symmetries. In a cosmological context, they often overclose the Universe (contrary to observational evidence), although one may prevent this by introducing biases or forcing anisotropic evolution of the walls. In a previous work [Correia et al., Phys. Rev. D 90, 023521 (2014), 10.1103/PhysRevD.90.023521], we numerically studied the evolution of various types of biased domain wall networks in the early Universe, confirming that anisotropic networks ultimately reach scaling while those with a biased potential or biased initial conditions decay. We also found that the analytic decay law obtained by Hindmarsh was in good agreement with simulations of biased potentials, but not of biased initial conditions, and suggested that the difference was related to the Gaussian approximation underlying the analytic law. Here, we extend our previous work in several ways. For the cases of biased potential and biased initial conditions, we study in detail the field distributions in the simulations, confirming that the validity (or not) of the Gaussian approximation is the key difference between the two cases. For anisotropic walls, we carry out a more extensive set of numerical simulations and compare them to the canonical velocity-dependent one-scale model for domain walls, finding that the model accurately predicts the linear scaling regime after isotropization. Overall, our analysis provides a quantitative description of the cosmological evolution of these networks.
Nuclear DNA C‐values in 30 Species Double the Familial Representation in Pteridophytes
OBERMAYER, RENATE; LEITCH, ILIA J.; HANSON, LYNDA; BENNETT, MICHAEL D.
2002-01-01
Nuclear DNA C‐values and genome size are important biodiversity characters with fundamental biological significance. Yet C‐value data for pteridophytes, a diverse group of vascular plants with approx. 9000 extant species, remain scarce. A recent survey by Bennett and Leitch (2001, Annals of Botany 87: 335–345) found that C‐values were reported for only 48 pteridophyte species. To improve phylogenetic representation in this group and to check previously reported estimates, C‐values for 30 taxa in 17 families were measured using flow cytometry for all but one species. This technique proved generally applicable, but the ease with which C‐value data were generated varied greatly between materials. Comparing the new data with those previously published revealed several large discrepancies. After discounting doubtful data, C‐values for 62 pteridophyte species remained acceptable for analysis. The present work has increased the number of such species’ C‐values by 93 %, and more than doubled the number of families represented (from 10 to 21). Analysis shows that pteridophyte C‐values vary approx. 450‐fold, from 0·16 pg in Selaginella kraussiana to 72·7 pg in Psilotum nudum var. gasa. Superimposing C‐value data onto a robust phylogeny of pteridophytes suggests some possible trends in C‐value evolution and highlights areas for future work. PMID:12197518
Nurse prescribing: radicalism or tokenism?
McCartney, W; Tyrer, S; Brazier, M; Prayle, D
1999-02-01
The creation of The Medical Products (Prescription by Nurses, etc.) Act 1992 has been generally welcomed by the nursing profession. This article seeks to introduce a note of scepticism about the assumed motivations for its introduction through an analysis of various legal, ethical, economic and political dimensions. In reviewing the position of nursing vis-à-vis medicine it is argued that one of the ways that nursing has sought to improve its professional position is to take on work previously done by doctors, and nurse prescribing can be seen in the context of the concurrent de-regulation of medicines, allowing greater access to medicines and therefore greater consumer choice. This de-regulation stems from the liberation ideology of the previous Conservative government. Viewed in this way nurse prescribing, particularly with reference to the limited nature of the nursing formulary, can be seen to be anomalous. In the light of this analysis, the reasons generally put forward (notably in the Crown Report 1989) for the introduction of nurse prescribing could be seen to be peripheral to its real purpose. It is argued that the most convincing reasons for its introduction relate to the medical profession as a social institution. It is proposed that the three primary aims behind the introduction of nurse prescribing are: the saving of money; the transfer of routine medical work to nursing; and a challenge to the professional monolith of medicine.
NASA Astrophysics Data System (ADS)
Bante-Guerra, J.; Conde-Contreras, M.; Trujillo, S.; Martinez-Torres, P.; Cruz-Jimenez, B.; Quintana, P.; Alvarado-Gil, J. J.
2009-02-01
Non destructive analysis of hydroxyapatite materials is an active research area mainly in the study of dental pieces and bones due to the importance these pieces have in medicine, archeology, dentistry, forensics and anthropology. Infrared thermography and photothermal techniques constitute highly valuable tools in those cases. In this work the quantitative analysis of thermal diffusion in bones is presented. The results obtained using thermographic images are compared with the ones obtained from the photothermal radiometry. Special emphasis is done in the analysis of samples with previous thermal damage. Our results show that the treatments induce changes in the physical properties of the samples. These results could be useful in the identification of the agents that induced modifications of unknown origin in hydroxyapatite structures.
Summer temperatures inferred from varved lacustrine sediment at Iceberg Lake in southcentral Alaska
NASA Astrophysics Data System (ADS)
Diedrich, K.; Loso, M. G.
2010-12-01
Iceberg Lake, a glacier-dammed lake in southcentral Alaska, has been previously shown to record over 1,500 years of continuous laminated lacustrine sediment deposition. Because previous work was based on examination of subaerial outcrops exposed by stream incision in the bed of the jökulhlaup-drained lake, the length of the record was limited by the extent of the outcrops. In August of 2010, we returned to core the remote lake; our goal was recovery of the complete sedimentary record in the lake, extending perhaps back to the onset of late Holocene glaciation—around 3-5 ka in this region. We used a Vibarcorer system to recover sediment cores from two locations, one near the site of previous work and another at the distal end of the lake. The longest cores recovered were 5.2 meters and 6.2 meters at the proximal and distal sites, respectively. Based on the average lamination thickness established previously at the proximal site (4.7 mm), these cores should each represent over 1000 years of sediment accumulation, and likely much longer at the distal site, where laminations are expected to be thinner. Having established previously that the lake’s laminations are annual varves and that they are positively correlated with summer (melt-season) temperatures, our analysis is focused on documenting a long time-series of annual sediment accumulation and summer-layer particle size. Both measurements will be used to interpret the history of summer temperatures. The cores may also provide sedimentary evidence of the timing of advances/retreats of nearby glaciers, including the Tana Glacier and Bagley Icefield, helping to clarify the poorly-constrained timing of neoglaciation in Southern Alaska. The paleoclimate record produced at Iceberg Lake will be included in the Arctic System Science 8ka project
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-07-01
This report summarizes all work of the Limited Energy Study of Steam Distribution Systems, Energy Engineering Analysis Program, Hawthorne Army Ammunition Depot (HWAAD), Nevada. The purpose of this limited energy study is to evaluate steam distribution and condensate collection systems in both the Industrial Area and Ordnance Area of HWAAD to develop a set of replacement actions that will reduce energy consumption and operating costs. These efforts consist of corrections and revisions to previously submitted funding requests. A number of facilities covering over 140,000 acres constitute HWAAD; however, this study was limited to the Industrial and Ordnance Areas.
NASA Astrophysics Data System (ADS)
Zhou, Jiangying; Lopresti, Daniel P.; Tasdizen, Tolga
1998-04-01
In this paper, we consider the problem of locating and extracting text from WWW images. A previous algorithm based on color clustering and connected components analysis works well as long as the color of each character is relatively uniform and the typography is fairly simple. It breaks down quickly, however, when these assumptions are violated. In this paper, we describe more robust techniques for dealing with this challenging problem. We present an improved color clustering algorithm that measures similarity based on both RGB and spatial proximity. Layout analysis is also incorporated to handle more complex typography. THese changes significantly enhance the performance of our text detection procedure.
High-resolution melting PCR analysis for rapid genotyping of Burkholderia mallei.
Girault, G; Wattiau, P; Saqib, M; Martin, B; Vorimore, F; Singha, H; Engelsma, M; Roest, H J; Spicic, S; Grunow, R; Vicari, N; De Keersmaecker, S C J; Roosens, N H C; Fabbi, M; Tripathi, B N; Zientara, S; Madani, N; Laroucau, K
2018-05-08
Burkholderia (B.) mallei is the causative agent of glanders. A previous work conducted on single-nucleotide polymorphisms (SNP) extracted from the whole genome sequences of 45 B. mallei isolates identified 3 lineages for this species. In this study, we designed a high-resolution melting (HRM) method for the screening of 15 phylogenetically informative SNPs within the genome of B. mallei that subtype the species into 3 lineages and 12 branches/sub-branches/groups. The present results demonstrate that SNP-based genotyping represent an interesting approach for the molecular epidemiology analysis of B. mallei. Copyright © 2018 Elsevier B.V. All rights reserved.
Optical analysis for simplified astigmatic correction of non-imaging focusing heliostat
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chong, K.K.
2010-08-15
In the previous work, non-imaging focusing heliostat that consists of m x n facet mirrors can carry out continuous astigmatic correction during sun-tracking with the use of only (m + n - 2) controllers. For this paper, a simplified astigmatic correction of non-imaging focusing heliostat is proposed for reducing the number of controllers from (m + n - 2) to only two. Furthermore, a detailed optical analysis of the new proposal has been carried out and the simulated result has shown that the two-controller system can perform comparably well in astigmatic correction with a much simpler and more cost effectivemore » design. (author)« less
NASA Technical Reports Server (NTRS)
Layland, J. W.
1974-01-01
An approximate analysis of the effect of a noisy carrier reference on the performance of sequential decoding is presented. The analysis uses previously developed techniques for evaluating noisy reference performance for medium-rate uncoded communications adapted to sequential decoding for data rates of 8 to 2048 bits/s. In estimating the ten to the minus fourth power deletion probability thresholds for Helios, the model agrees with experimental data to within the experimental tolerances. The computational problem involved in sequential decoding, carrier loop effects, the main characteristics of the medium-rate model, modeled decoding performance, and perspectives on future work are discussed.
Chang, Hsien-Tsung; Mishra, Nilamadhab; Lin, Chung-Chih
2015-01-01
The current rapid growth of Internet of Things (IoT) in various commercial and non-commercial sectors has led to the deposition of large-scale IoT data, of which the time-critical analytic and clustering of knowledge granules represent highly thought-provoking application possibilities. The objective of the present work is to inspect the structural analysis and clustering of complex knowledge granules in an IoT big-data environment. In this work, we propose a knowledge granule analytic and clustering (KGAC) framework that explores and assembles knowledge granules from IoT big-data arrays for a business intelligence (BI) application. Our work implements neuro-fuzzy analytic architecture rather than a standard fuzzified approach to discover the complex knowledge granules. Furthermore, we implement an enhanced knowledge granule clustering (e-KGC) mechanism that is more elastic than previous techniques when assembling the tactical and explicit complex knowledge granules from IoT big-data arrays. The analysis and discussion presented here show that the proposed framework and mechanism can be implemented to extract knowledge granules from an IoT big-data array in such a way as to present knowledge of strategic value to executives and enable knowledge users to perform further BI actions.
Chang, Hsien-Tsung; Mishra, Nilamadhab; Lin, Chung-Chih
2015-01-01
The current rapid growth of Internet of Things (IoT) in various commercial and non-commercial sectors has led to the deposition of large-scale IoT data, of which the time-critical analytic and clustering of knowledge granules represent highly thought-provoking application possibilities. The objective of the present work is to inspect the structural analysis and clustering of complex knowledge granules in an IoT big-data environment. In this work, we propose a knowledge granule analytic and clustering (KGAC) framework that explores and assembles knowledge granules from IoT big-data arrays for a business intelligence (BI) application. Our work implements neuro-fuzzy analytic architecture rather than a standard fuzzified approach to discover the complex knowledge granules. Furthermore, we implement an enhanced knowledge granule clustering (e-KGC) mechanism that is more elastic than previous techniques when assembling the tactical and explicit complex knowledge granules from IoT big-data arrays. The analysis and discussion presented here show that the proposed framework and mechanism can be implemented to extract knowledge granules from an IoT big-data array in such a way as to present knowledge of strategic value to executives and enable knowledge users to perform further BI actions. PMID:26600156
Single-shot work extraction in quantum thermodynamics revisited
NASA Astrophysics Data System (ADS)
Wang, Shang-Yung
2018-01-01
We revisit the problem of work extraction from a system in contact with a heat bath to a work storage system, and the reverse problem of state formation from a thermal system state in single-shot quantum thermodynamics. A physically intuitive and mathematically simple approach using only elementary majorization theory and matrix analysis is developed, and a graphical interpretation of the maximum extractable work, minimum work cost of formation, and corresponding single-shot free energies is presented. This approach provides a bridge between two previous methods based respectively on the concept of thermomajorization and a comparison of subspace dimensions. In addition, a conceptual inconsistency with regard to general work extraction involving transitions between multiple energy levels of the work storage system is clarified and resolved. It is shown that an additional contribution to the maximum extractable work in those general cases should be interpreted not as work extracted from the system, but as heat transferred from the heat bath. Indeed, the additional contribution is an artifact of a work storage system (essentially a suspended ‘weight’ that can be raised or lowered) that does not truly distinguish work from heat. The result calls into question the common concept that a work storage system in quantum thermodynamics is simply the quantum version of a suspended weight in classical thermodynamics.
Heats of Mixing Using an Isothermal Titration Calorimeter: Associated Thermal Effects
de Rivera, Manuel Rodríguez; Socorro, Fabiola; Matos, José S.
2009-01-01
The correct determination of the energy generated or absorbed in the sample cell of an Isothermal Titration Calorimeter (ITC) requires a thorough analysis of the calorimetric signal. This means the identification and quantification of any thermal effect inherent to the working method. In this work, it is carried out a review on several thermal effects, studied by us in previous work, and which appear when an ITC is used for measuring the heats of mixing of liquids in a continuous mode. These effects are due to: (i) the difference between the temperature of the injected liquid and the temperature of the mixture during the mixing process, (ii) the increase of the liquid volume located in the mixing cell and (iii) the stirring velocity. Besides, methods for the identification and quantification of the mentioned effects are suggested. PMID:19742175
Towards the Verification of Human-Robot Teams
NASA Technical Reports Server (NTRS)
Fisher, Michael; Pearce, Edward; Wooldridge, Mike; Sierhuis, Maarten; Visser, Willem; Bordini, Rafael H.
2005-01-01
Human-Agent collaboration is increasingly important. Not only do high-profile activities such as NASA missions to Mars intend to employ such teams, but our everyday activities involving interaction with computational devices falls into this category. In many of these scenarios, we are expected to trust that the agents will do what we expect and that the agents and humans will work together as expected. But how can we be sure? In this paper, we bring together previous work on the verification of multi-agent systems with work on the modelling of human-agent teamwork. Specifically, we target human-robot teamwork. This paper provides an outline of the way we are using formal verification techniques in order to analyse such collaborative activities. A particular application is the analysis of human-robot teams intended for use in future space exploration.
The linear stability of the post-Newtonian triangular equilibrium in the three-body problem
NASA Astrophysics Data System (ADS)
Yamada, Kei; Tsuchiya, Takuya
2017-12-01
Continuing a work initiated in an earlier publication (Yamada et al. in Phys Rev D 91:124016, 2015), we reexamine the linear stability of the triangular solution in the relativistic three-body problem for general masses by the standard linear algebraic analysis. In this paper, we start with the Einstein-Infeld-Hoffmann form of equations of motion for N-body systems in the uniformly rotating frame. As an extension of the previous work, we consider general perturbations to the equilibrium, i.e., we take account of perturbations orthogonal to the orbital plane, as well as perturbations lying on it. It is found that the orthogonal perturbations depend on each other by the first post-Newtonian (1PN) three-body interactions, though these are independent of the lying ones likewise the Newtonian case. We also show that the orthogonal perturbations do not affect the condition of stability. This is because these do not grow with time, but always precess with two frequency modes, namely, the same with the orbital frequency and the slightly different one due to the 1PN effect. The condition of stability, which is identical to that obtained by the previous work (Yamada et al. 2015) and is valid for the general perturbations, is obtained from the lying perturbations.
Fetterhoff, Dustin; Opris, Ioan; Simpson, Sean L.; Deadwyler, Sam A.; Hampson, Robert E.; Kraft, Robert A.
2014-01-01
Background Multifractal analysis quantifies the time-scale-invariant properties in data by describing the structure of variability over time. By applying this analysis to hippocampal interspike interval sequences recorded during performance of a working memory task, a measure of long-range temporal correlations and multifractal dynamics can reveal single neuron correlates of information processing. New method Wavelet leaders-based multifractal analysis (WLMA) was applied to hippocampal interspike intervals recorded during a working memory task. WLMA can be used to identify neurons likely to exhibit information processing relevant to operation of brain–computer interfaces and nonlinear neuronal models. Results Neurons involved in memory processing (“Functional Cell Types” or FCTs) showed a greater degree of multifractal firing properties than neurons without task-relevant firing characteristics. In addition, previously unidentified FCTs were revealed because multifractal analysis suggested further functional classification. The cannabinoid-type 1 receptor partial agonist, tetrahydrocannabinol (THC), selectively reduced multifractal dynamics in FCT neurons compared to non-FCT neurons. Comparison with existing methods WLMA is an objective tool for quantifying the memory-correlated complexity represented by FCTs that reveals additional information compared to classification of FCTs using traditional z-scores to identify neuronal correlates of behavioral events. Conclusion z-Score-based FCT classification provides limited information about the dynamical range of neuronal activity characterized by WLMA. Increased complexity, as measured with multifractal analysis, may be a marker of functional involvement in memory processing. The level of multifractal attributes can be used to differentially emphasize neural signals to improve computational models and algorithms underlying brain–computer interfaces. PMID:25086297
[Adolescents previously involved in Satanism: mental health problems experience].
Heathcote, H; Gmeiner, A; Poggenpoel, M
1998-03-01
As far as the phenomena of adolescents previously involved with satanism that experience obstacles in the strive for mental health, no research has previously been done. Adolescents previously involved in satanism, presents behaviour problems like aggressive outbursts depression, "psychosis", or suicide attempts that can even lead to suicide. In the phenomena-analysis semi-structured, phenomenological interviews with the respondents and their parents, were performed. The respondents were requested to write a naive sketch about there life. After the data-control was done, guidelines for nursing staff had been set. The guidelines are set for the management of adolescents that has previously been involved in satanism, and experiences obstacles in their strive for mental health. Interviews with experts in satanism was done, literature in the form of books, magazines and newsclippings were used to verify the findings in the research. The most important guidelines are that: the caregivers have to be reborn Christians; they are not allowed to show, any fear or sympathy; they have to have sufficient knowledge about satanism; the adolescent has to be unconditionally accepted; the caregivers have to work in a team; the adolescents have to be taught to deal with their emotions.
Adolescents previously involved in Satanism experiencing mental health problems.
Heathcote, H; Gmeiner, A; Poggenpoel, M
1999-06-01
No research has previously been done regarding the phenomenon of adolescents who have previously been involved in Satanism and who experience obstacles in their strive for mental health. Adolescents previously involved in Satanism present behavioral problems like aggressive outbursts, depression, "psychosis" or suicide attempts, that could lead to suicide. In the phenomenon-analysis semi-structured, phenomenological interviews were performed with the respondents and their parents. The respondents were requested to write a naïve sketch about their life. After completion of the data-control, guidelines for nursing staff were set. The guidelines are set for the management of adolescents who have previously been involved in Satanism and who experience obstacles in their strive for mental health. Interviews with experts in Satanism were conducted, literature in the form of books, magazines and newspaper-clippings were used to verify the research findings. The most important guidelines are that the caregivers have to be reborn Christians; they are not allowed to show any fear or sympathy; they must have sufficient knowledge about Satanism; the adolescents have to be unconditionally accepted; the caregivers have to work in a team and the adolescents have to be taught to deal with their emotions.
Yong, Mei; Nasterlack, Michael; Messerer, Peter; Oberlinner, Christoph; Lang, Stefan
2014-02-01
Human evidence of carcinogenicity concerning shift work is inconsistent. In a previous study, we observed no elevated risk of total mortality in shift workers followed up until the end of 2006. The present study aimed to investigate cancer-specific mortality, relative to shift work. The cohort consisted of male production workers (14,038 shift work and 17,105 day work), employed at BASF Ludwigshafen for at least 1 year between 1995 and 2005. Vital status was followed from 2000 to 2009. Cause-specific mortality was obtained from death certificates. Exposure to shift work was measured both as a dichotomous and continuous variable. While lifetime job history was not available, job duration in the company was derived from personal data, which was then categorized at the quartiles. Cox proportional hazard model was used to adjust for potential confounders, in which job duration was treated as a time-dependent covariate. Between 2000 and 2009, there were 513 and 549 deaths among rotating shift and day work employees, respectively. Risks of total and cancer-specific mortalities were marginally lower among shift workers when taking age at entry and job level into consideration and were statistically significantly lower when cigarette smoking, alcohol intake, job duration, and chronic disease prevalence at entry to follow-up were included as explanatory factors. With respect to mortality risks in relation to exposure duration, no increased risks were found in any of the exposure groups after full adjustment and there was no apparent trend suggesting an exposure-response relation with duration of shift work. The present analysis extends and confirms our previous finding of no excess risk of mortality associated with work in the shift system employed at BASF Ludwigshafen. More specifically, there is also no indication of an increased risk of mortality due to cancer.
Reference Accuracy among Research Articles Published in "Research on Social Work Practice"
ERIC Educational Resources Information Center
Wilks, Scott E.; Geiger, Jennifer R.; Bates, Samantha M.; Wright, Amy L.
2017-01-01
Objective: The objective was to examine reference errors in research articles published in Research on Social Work Practice. High rates of reference errors in other top social work journals have been noted in previous studies. Methods: Via a sampling frame of 22,177 total references among 464 research articles published in the previous decade, a…
Nursing lives in the blogosphere: A thematic analysis of anonymous online nursing narratives.
Castro, Aimee; Andrews, Gavin
2018-02-01
The aim of this study was to explore the work-life narratives of nurses through a thematic analysis of the nursing accounts they post in their publicly accessible, anonymous blogs. Many nurses participate on social media. Blogs have been advocated as a self-reflective tool in nursing practice, yet as far as the authors are aware, no previous studies have explored nurses' individual blogs for their potential to reveal nurses' perceptions of nursing work. The research design was qualitative description. Between May-August 2015, Internet search engines were used to discover lists of nursing blogs recommended by organizations representing nurses' interests. Recommended blogs were purposively sampled. Four anonymous blogs written by nurses from different nursing specialties met the sampling criteria. All 520 of their entries from 2014 were read and copied into NVivo 10, where an inductive coding process was followed. Three major themes arose in these nurses' online discussions of their work lives: they truly care about and value their nursing work, but they are feeling stressed and burnt out and they are using their anonymous blogs to share factors that frustrate them in their nursing work. Three main areas of frustration were revealed: teamwork problems, challenging patients and families, and management issues. Anonymous nursing blogs offer valuable, longitudinal insights into nurses' perceptions of their work lives. Nursing blogs should be further explored for ongoing insights into nurses' experiences of nursing work, as well as nurses' recommendations for addressing issues causing them to feel frustrated in their work environments. © 2017 John Wiley & Sons Ltd.
Nordgren, Leslie D; Gerberich, Susan G; Alexander, Bruce H; Church, Timothy R; Bender, Jeff B; Ryan, Andrew D
2014-08-15
To identify risk and protective factors for work-related bite injuries among veterinary technicians certified in Minnesota. Nested case-control study. 868 certified veterinary technicians (CVTs). A questionnaire was mailed to CVTs who previously participated in a survey regarding work-related injuries and did (cases; 301 surveys sent) or did not (controls; 567) report qualifying work-related animal bite injuries in the preceding 12 months. Descriptive statistics were summarized. Demographic and work-related variables for the month preceding the bite injury (for cases) or a randomly selected month (controls) were assessed with univariate analysis (489 CVTs) and multivariate analysis of a subset of 337 CVTs who worked in small or mixed mostly small animal facilities. Responses were received from 176 case and 313 control CVTs. For the subset of 337 CVTs, risk of bite injury was higher for those < 25 years of age (OR, 3.82; 95% confidence interval [CI], 1.84 to 7.94) than for those ≥ 35 years of age, for those who had worked < 5 years (OR, 3.24; 95% CI, 1.63 to 6.45) versus ≥ 10 years in any veterinary facility, and for those who handled ≥ 5 species/d (OR, 1.99; 95% CI, 1.06 to 3.74) versus < 3 species/d. Risk was lower for CVTs who handled < 10 versus ≥ 20 animals/d (OR, 0.23; 95% CI, 0.08 to 0.71). Several work-related factors were associated with the risk of work-related bite injury to CVTs. These findings may serve as a basis for development of intervention efforts and future research regarding work-related injuries among veterinary staff.
NASA Astrophysics Data System (ADS)
Larson, Timothy P.; Schou, Jesper
2018-02-01
Building upon our previous work, in which we analyzed smoothed and subsampled velocity data from the Michelson Doppler Imager (MDI), we extend our analysis to unsmoothed, full-resolution MDI data. We also present results from the Helioseismic and Magnetic Imager (HMI), in both full resolution and processed to be a proxy for the low-resolution MDI data. We find that the systematic errors that we saw previously, namely peaks in both the high-latitude rotation rate and the normalized residuals of odd a-coefficients, are almost entirely absent in the two full-resolution analyses. Furthermore, we find that both systematic errors seem to depend almost entirely on how the input images are apodized, rather than on resolution or smoothing. Using the full-resolution HMI data, we confirm our previous findings regarding the effect of using asymmetric profiles on mode parameters, and also find that they occasionally result in more stable fits. We also confirm our previous findings regarding discrepancies between 360-day and 72-day analyses. We further investigate a six-month period previously seen in f-mode frequency shifts using the low-resolution datasets, this time accounting for solar-cycle dependence using magnetic-field data. Both HMI and MDI saw prominent six-month signals in the frequency shifts, but we were surprised to discover that the strongest signal at that frequency occurred in the mode coverage for the low-resolution proxy. Finally, a comparison of mode parameters from HMI and MDI shows that the frequencies and a-coefficients agree closely, encouraging the concatenation of the two datasets.
Not All Biofluids Are Created Equal: Chewing Over Salivary Diagnostics and the Epigenome
Wren, M.E.; Shirtcliff, E.A.; Drury, Stacy S.
2015-01-01
Purpose This article describes progress to date in the characterization of the salivary epigenome and considers the importance of previous work in the salivary microbiome, proteome, endocrine analytes, genome, and transcriptome. Methods PubMed and Web of Science were used to extensively search the existing literature (original research and reviews) related to salivary diagnostics and bio-marker development, of which 125 studies were examined. This article was derived from the most relevant 73 sources highlighting the recent state of the evolving field of salivary epigenomics and contributing significantly to the foundational work in saliva-based research. Findings Validation of any new saliva-based diagnostic or analyte will require comparison to previously accepted standards established in blood. Careful attention to the collection, processing, and analysis of salivary analytes is critical for the development and implementation of newer applications that include genomic, transcriptomic, and epigenomic markers. All these factors must be integrated into initial study design. Implications This commentary highlights the appeal of the salivary epigenome for translational applications and its utility in future studies of development and the interface among environment, disease, and health. PMID:25778408
DOE Office of Scientific and Technical Information (OSTI.GOV)
Holden, Zachary C.; Richard, Ryan M.; Herbert, John M., E-mail: herbert@chemistry.ohio-state.edu
2013-12-28
An implementation of Ewald summation for use in mixed quantum mechanics/molecular mechanics (QM/MM) calculations is presented, which builds upon previous work by others that was limited to semi-empirical electronic structure for the QM region. Unlike previous work, our implementation describes the wave function's periodic images using “ChElPG” atomic charges, which are determined by fitting to the QM electrostatic potential evaluated on a real-space grid. This implementation is stable even for large Gaussian basis sets with diffuse exponents, and is thus appropriate when the QM region is described by a correlated wave function. Derivatives of the ChElPG charges with respect tomore » the QM density matrix are a potentially serious bottleneck in this approach, so we introduce a ChElPG algorithm based on atom-centered Lebedev grids. The ChElPG charges thus obtained exhibit good rotational invariance even for sparse grids, enabling significant cost savings. Detailed analysis of the optimal choice of user-selected Ewald parameters, as well as timing breakdowns, is presented.« less
Analysis of Precursor Properties of mixed Al/Alumel Cylindrical Wire Arrays*
NASA Astrophysics Data System (ADS)
Stafford, A.; Safronova, A. S.; Kantsyrev, V. L.; Esaulov, A. A.; Weller, M. E.; Shrestha, I.; Osborne, G. C.; Shlyaptseva, V. V.; Keim, S. F.; Coverdale, C. A.; Chuvatin, A. S.
2012-10-01
Previous studies of mid-Z (Cu and Ni) cylindrical wire arrays (CWAs) on Zebra have found precursors with high electron temperatures of >300 eV. However, past experiments with Al CWAs did not find the same high temperature precursors. New precursor experiments using mixed Al/Alumel (Ni 95%, Si 2%, and Al 2%) cylindrical wire arrays have been performed to understand how the properties of L-shell Ni precursor will change and whether Al precursor will be observed. Time gated spectra and pinholes are used to determine precursor plasma conditions for comparison with previous Alumel precursor experiments. A full diagnostic set which included more than ten different beam-lines was implemented. Future work in this direction is discussed. [4pt] *This work was supported by NNSA under DOE Cooperative Agreements DE-FC52-06NA27588, and in part by DE-FC52-06NA27586, and DE-FC52-06NA27616. Sandia is a multi-program laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under Contract DE-AC04-94AL85000.
[Willingness to work abroad among Hungarian medical students].
Győrffy, Zsuzsa; Szél, Zsuzsanna
2018-01-01
Migration, drop-out and ageing of physicians are the most important challenges of the 21st century healthcare system. The young doctors' willingness to work abroad will become a decisive issue of the human resources of healthcare in the following decades. To explore the willingness of migration among medical university students. Quantitative and qualitative online survey of students from 4 Hungarian medical universities (n = 530). In the present study we investigated only the 5th- and 6th- year students' answers (n = 165). 40% of students plan to work abroad, mostly for a 2-5 year timeframe. The motivation of working abroad are the following: work conditions of medical system, inadequate pay and general living conditions in Hungary. The content analysis of open answers showed that the willingness to return depends mainly on family reasons and the objective working conditions (infrastructure, pay, abolition of the gratuity system). An equally important factor is the evolution of work culture. As opposed to previous studies, our results indicate a more prevalent willingness to work abroad while an unambiguous return is only possible with a drastic change in the healthcare system. Orv Hetil. 2018; 159(1): 31-37.
Full-motion video analysis for improved gender classification
NASA Astrophysics Data System (ADS)
Flora, Jeffrey B.; Lochtefeld, Darrell F.; Iftekharuddin, Khan M.
2014-06-01
The ability of computer systems to perform gender classification using the dynamic motion of the human subject has important applications in medicine, human factors, and human-computer interface systems. Previous works in motion analysis have used data from sensors (including gyroscopes, accelerometers, and force plates), radar signatures, and video. However, full-motion video, motion capture, range data provides a higher resolution time and spatial dataset for the analysis of dynamic motion. Works using motion capture data have been limited by small datasets in a controlled environment. In this paper, we explore machine learning techniques to a new dataset that has a larger number of subjects. Additionally, these subjects move unrestricted through a capture volume, representing a more realistic, less controlled environment. We conclude that existing linear classification methods are insufficient for the gender classification for larger dataset captured in relatively uncontrolled environment. A method based on a nonlinear support vector machine classifier is proposed to obtain gender classification for the larger dataset. In experimental testing with a dataset consisting of 98 trials (49 subjects, 2 trials per subject), classification rates using leave-one-out cross-validation are improved from 73% using linear discriminant analysis to 88% using the nonlinear support vector machine classifier.
Dios, Federico; Recolons, Jaume; Rodríguez, Alejandro; Batet, Oscar
2008-02-04
Temporal analysis of the irradiance at the detector plane is intended as the first step in the study of the mean fade time in a free optical communication system. In the present work this analysis has been performed for a Gaussian laser beam propagating in the atmospheric turbulence by means of computer simulation. To this end, we have adapted a previously known numerical method to the generation of long phase screens. The screens are displaced in a transverse direction as the wave is propagated, in order to simulate the wind effect. The amplitude of the temporal covariance and its power spectrum have been obtained at the optical axis, at the beam centroid and at a certain distance from these two points. Results have been worked out for weak, moderate and strong turbulence regimes and when possible they have been compared with theoretical models. These results show a significant contribution of beam wander to the temporal behaviour of the irradiance, even in the case of weak turbulence. We have also found that the spectral bandwidth of the covariance is hardly dependent on the Rytov variance.
A new definition of burnout syndrome based on Farber's proposal
2009-01-01
Background Although diverse definitions have been construed for burnout syndrome, most authors consider it to be a single phenomenon, the result of chronic work-related stress. However, in order to enable specific intervention strategies to be adopted, it is first necessary to establish different profiles for the syndrome. In this respect, have been proposed three burnout types ("frenetic", "underchallenged" and "worn-out"), each of which requires different means of dealing with frustration in the workplace. This study is an attempt to define and systematize the properties that characterize this typology proposal. Methods For this purpose, the documents considering preliminary typology were examined by means of qualitative content analysis supported by grounded theory. Semiotic analysis was then performed on the core category resulting from the previous analysis. Results A classification criterion, made up of three different burnout subtypes ("frenetic", "underchallenged", and "worn-out") capable of integrating the entire proposal was formulated. Discussion Understanding the development of burnout syndrome, as a succession of stages characterized by the progressive diminishing of dedication to work, could serve for the establishment of specific therapies and for the prevention of the syndrome. PMID:19948055
Optimal Parameter Design of Coarse Alignment for Fiber Optic Gyro Inertial Navigation System.
Lu, Baofeng; Wang, Qiuying; Yu, Chunmei; Gao, Wei
2015-06-25
Two different coarse alignment algorithms for Fiber Optic Gyro (FOG) Inertial Navigation System (INS) based on inertial reference frame are discussed in this paper. Both of them are based on gravity vector integration, therefore, the performance of these algorithms is determined by integration time. In previous works, integration time is selected by experience. In order to give a criterion for the selection process, and make the selection of the integration time more accurate, optimal parameter design of these algorithms for FOG INS is performed in this paper. The design process is accomplished based on the analysis of the error characteristics of these two coarse alignment algorithms. Moreover, this analysis and optimal parameter design allow us to make an adequate selection of the most accurate algorithm for FOG INS according to the actual operational conditions. The analysis and simulation results show that the parameter provided by this work is the optimal value, and indicate that in different operational conditions, the coarse alignment algorithms adopted for FOG INS are different in order to achieve better performance. Lastly, the experiment results validate the effectiveness of the proposed algorithm.
Cluster and constraint analysis in tetrahedron packings
NASA Astrophysics Data System (ADS)
Jin, Weiwei; Lu, Peng; Liu, Lufeng; Li, Shuixiang
2015-04-01
The disordered packings of tetrahedra often show no obvious macroscopic orientational or positional order for a wide range of packing densities, and it has been found that the local order in particle clusters is the main order form of tetrahedron packings. Therefore, a cluster analysis is carried out to investigate the local structures and properties of tetrahedron packings in this work. We obtain a cluster distribution of differently sized clusters, and peaks are observed at two special clusters, i.e., dimer and wagon wheel. We then calculate the amounts of dimers and wagon wheels, which are observed to have linear or approximate linear correlations with packing density. Following our previous work, the amount of particles participating in dimers is used as an order metric to evaluate the order degree of the hierarchical packing structure of tetrahedra, and an order map is consequently depicted. Furthermore, a constraint analysis is performed to determine the isostatic or hyperstatic region in the order map. We employ a Monte Carlo algorithm to test jamming and then suggest a new maximally random jammed packing of hard tetrahedra from the order map with a packing density of 0.6337.
Suicide by occupation: systematic review and meta-analysis.
Milner, Allison; Spittal, Matthew J; Pirkis, Jane; LaMontagne, Anthony D
2013-12-01
Previous research has shown that those employed in certain occupations, such as doctors and farmers, have an elevated risk of suicide, yet little research has sought to synthesise these findings across working-age populations. To summarise published research in this area through systematic review and meta-analysis. Random effects meta-analyses were used to calculate a pooled risk of suicide across occupational skill-level groups. Thirty-four studies were included in the meta-analysis. Elementary professions (e.g. labourers and cleaners) were at elevated risk compared with the working-age population (rate ratio (RR) = 1.84, 95% CI 1.46-2.33), followed by machine operators and deck crew (RR = 1.78, 95% CI 1.22-2.60) and agricultural workers (RR = 1.64, 95% CI 1.19-2.28). Results suggested a stepwise gradient in risk, with the lowest skilled occupations being at greater risk of suicide than the highest skill-level group. This is the first comprehensive meta-analytical review of suicide and occupation. There is a need for future studies to investigate explanations for the observed skill-level differences, particularly in people employed in lower skill-level groups.
Physical violence against schoolteachers: an analysis using structural equation models.
Melanda, Francine Nesello; Santos, Hellen Geremias Dos; Salvagioni, Denise Albieri Jodas; Mesas, Arthur Eumann; González, Alberto Durán; Andrade, Selma Maffei de
2018-01-01
This study aimed to identify associations between sociodemographic, workplace, and school environmental factors and the occurrence of physical violence against teachers at school. This was a cross-sectional study of teachers that had been working for at least a year in elementary or middle schools in the state school system in Londrina, Paraná State, Brazil. A convenience sample was taken of the 20 schools with the most teachers in the city of Londrina. Data were obtained through interviews and self-completed questionnaires in 2012 and 2013. Physical violence was defined as reports of attempted or actual physical aggression using cold steel weapons or firearms in the 12 months prior to the study. Structural equation models were used for the data analysis. Of the 937 teachers eligible for the study, 789 (84.2%) were interviewed. The physical violence victimization rate in schoolteachers was 8.4%. Work conditions (number of schools where the teachers worked and type of employment contract) showed a direct effect on physical violence (p = 0.032), as did having experienced previous situations of violence in the school (p = 0.059). Age (up to 40 years) was indirectly related to physical violence, correlating with worse work conditions. The results highlight the importance of improving teachers' work conditions and implementing measures to prevent violence both in schools and in society as a whole.
NASA Technical Reports Server (NTRS)
Long, Jason M.; Lane, John E.; Metzger, Philip T.
2008-01-01
A previously developed mathematical model is amended to more accurately incorporate the effects of lift and drag on single dust particles in order to predict their behavior in the wake of high velocity gas flow. The model utilizes output from a CFD or DSMC simulation of exhaust from a rocket nozzle hot gas jet. An extension of the Saffman equation for lift based on the research of McLaughlin (1991) and Mei (1992) is used, while an equation for the Magnus force modeled after the work of Oesterle (1994) and Tsuji et al (1985) is applied. A relationship for drag utilizing a particle shape factor (phi = 0.8) is taken from the work of Haider and Levenspiel (1989) for application to non-spherical particle dynamics. The drag equation is further adjusted to account for rarefaction and compressibility effects in rarefied and high Mach number flows according to the work of Davies (1945) and Loth (2007) respectively. Simulations using a more accurate model with the correction factor (Epsilon = 0.8 in a 20% particle concentration gas flow) given by Richardson and Zaki (1954) and Rowe (1961) show that particles have lower ejection angles than those that were previously calculated. This is more prevalent in smaller particles, which are shown through velocity and trajectory comparison to be more influenced by the flow of the surrounding gas. It is shown that particles are more affected by minor changes to drag forces than larger adjustments to lift forces, demanding a closer analysis of the shape and behavior of lunar dust particles and the composition of the surrounding gas flow.
Diwadkar, Vaibhav A.; Asemi, Avisa; Burgess, Ashley; Chowdury, Asadur; Bressler, Steven L.
2017-01-01
The dorsal Anterior Cingulate Cortex (dACC) and the Supplementary Motor Area (SMA) are known to interact during motor coordination behavior. We previously discovered that the directional influences underlying this interaction in a visuo-motor coordination task are asymmetric, with the dACC→SMA influence being significantly greater than that in the reverse direction. To assess the specificity of this effect, here we undertook an analysis of the interaction between dACC and SMA in two distinct contexts. In addition to the motor coordination task, we also assessed these effects during a (n-back) working memory task. We applied directed functional connectivity analysis to these two task paradigms, and also to the rest condition of each paradigm, in which rest blocks were interspersed with task blocks. We report here that the previously known asymmetric interaction between dACC and SMA, with dACC→SMA dominating, was significantly larger in the motor coordination task than the memory task. Moreover the asymmetry between dACC and SMA was reversed during the rest condition of the motor coordination task, but not of the working memory task. In sum, the dACC→SMA influence was significantly greater in the motor task than the memory task condition, and the SMA→dACC influence was significantly greater in the motor rest than the memory rest condition. We interpret these results as suggesting that the potentiation of motor sub-networks during the motor rest condition supports the motor control of SMA by dACC during the active motor task condition. PMID:28278267
Jacobson, Liron; Ezra, Adi; Berger, Uri; Lavidor, Michal
2012-05-01
Studies have mainly documented behavioral changes induced by transcranial direct current stimulation (tDCS), but recently cortical modulations of tDCS have also been investigated. Our previous work revealed behavioral inhibition modulation by anodal tDCS over the right inferior frontal gyrus (rIFG); however, the electrophysiological correlates underlying this stimulation montage have yet to be established. The current work aimed to evaluate the distribution of neuronal oscillations changes following anodal tDCS over rIFG coupled with cathodal tDCS over left orbitofrontal cortex (lOFC) using spectral power analysis. Healthy subjects underwent sham and real tDCS (15 min, 1.5 mA, anodal rIFG; cathodal lOFC) stimulation conditions in a single-blind, placebo-controlled cross-over trial. Following tDCS session, resting EEG recordings were collected during 15 min. Analysis showed a significant and selective diminution of the power of theta band. The theta diminution was observed in the rIFG area (represented the anode electrode), and was not found in the lOFC area (represented the cathode electrode). A significant effect was observed only in the theta but not in other bands. These results are the first demonstration of modulating oscillatory activity as measured by EEG with tDCS over rIFG in general, and documenting theta band reduction with this montage in particular. Our results may explain the improvement in behavioral inhibition reported in our previous work, and although this study was conducted with healthy subjects, the findings suggest that tDCS may also modulate electrophysiological changes among ADHD patients, where decreasing theta activity is the target of neuro-feedback methods aimed to improve cognitive control. Copyright © 2011 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.
How does the past of a soccer match influence its future? Concepts and statistical analysis.
Heuer, Andreas; Rubner, Oliver
2012-01-01
Scoring goals in a soccer match can be interpreted as a stochastic process. In the most simple description of a soccer match one assumes that scoring goals follows from independent rate processes of both teams. This would imply simple Poissonian and Markovian behavior. Deviations from this behavior would imply that the previous course of the match has an impact on the present match behavior. Here a general framework for the identification of deviations from this behavior is presented. For this endeavor it is essential to formulate an a priori estimate of the expected number of goals per team in a specific match. This can be done based on our previous work on the estimation of team strengths. Furthermore, the well-known general increase of the number of the goals in the course of a soccer match has to be removed by appropriate normalization. In general, three different types of deviations from a simple rate process can exist. First, the goal rate may depend on the exact time of the previous goals. Second, it may be influenced by the time passed since the previous goal and, third, it may reflect the present score. We show that the Poissonian scenario is fulfilled quite well for the German Bundesliga. However, a detailed analysis reveals significant deviations for the second and third aspect. Dramatic effects are observed if the away team leads by one or two goals in the final part of the match. This analysis allows one to identify generic features about soccer matches and to learn about the hidden complexities behind scoring goals. Among others the reason for the fact that the number of draws is larger than statistically expected can be identified.
How Does the Past of a Soccer Match Influence Its Future? Concepts and Statistical Analysis
Heuer, Andreas; Rubner, Oliver
2012-01-01
Scoring goals in a soccer match can be interpreted as a stochastic process. In the most simple description of a soccer match one assumes that scoring goals follows from independent rate processes of both teams. This would imply simple Poissonian and Markovian behavior. Deviations from this behavior would imply that the previous course of the match has an impact on the present match behavior. Here a general framework for the identification of deviations from this behavior is presented. For this endeavor it is essential to formulate an a priori estimate of the expected number of goals per team in a specific match. This can be done based on our previous work on the estimation of team strengths. Furthermore, the well-known general increase of the number of the goals in the course of a soccer match has to be removed by appropriate normalization. In general, three different types of deviations from a simple rate process can exist. First, the goal rate may depend on the exact time of the previous goals. Second, it may be influenced by the time passed since the previous goal and, third, it may reflect the present score. We show that the Poissonian scenario is fulfilled quite well for the German Bundesliga. However, a detailed analysis reveals significant deviations for the second and third aspect. Dramatic effects are observed if the away team leads by one or two goals in the final part of the match. This analysis allows one to identify generic features about soccer matches and to learn about the hidden complexities behind scoring goals. Among others the reason for the fact that the number of draws is larger than statistically expected can be identified. PMID:23226200
Effects of real fluid properties on axial turbine meanline design and off-design analysis
NASA Astrophysics Data System (ADS)
MacLean, Cameron
The effects of real fluid properties on axial turbine meanline analysis have been investigated employing two meanline analysis codes, namely Turbine Meanline Design (TMLD) and Turbine Meanline Off-Design (TMLO). The previously developed TMLD code assumed the working fluid was an ideal gas. Therefore it was modified to use real fluid properties. TMLO was then developed from TMLD Both codes can be run using either the ideal gas assumption or real fluid properties. TMLD was employed for the meanline design of several axial turbines for a range of inlet conditions, using both the ideal gas assumption and real fluid properties. The resulting designs were compared to see the effects of real fluid properties. Meanline designs, generated using the ideal gas assumption, were then analysed with TMLO using real fluid properties. This was done over a range of inlet conditions that correspond to varying degrees of departure from ideal gas conditions. The goal was to show how machines designed with the ideal gas assumption would perform with the real working fluid. The working fluid used in both investigations was supercritical carbon dioxide. Results from the investigation show that real fluid properties had a strong effect on the gas path areas of the turbine designs as well as the performance of turbines designed using the ideal gas assumption. Specifically, power output and the velocities of the working fluid were affected. It was found that accounting for losses tended to lessen the effects of the real fluid properties.
NASA Astrophysics Data System (ADS)
Bragato, P. L.
2017-10-01
The strong earthquakes that occurred in Italy between 2009 and 2016 represent an abrupt acceleration of seismicity in respect of the previous 30 years. Such behavior seems to agree with the periodic rate change I observed in a previous paper. The present work improves that study by extending the data set up to the end of 2016, adopting the latest version of the historical seismic catalog of Italy, and introducing Schuster spectrum analysis for the detection of the oscillatory period and the assessment of its statistical significance. Applied to the declustered catalog of M w ≥ 6 earthquakes that occurred between 1600 and 2016, the analysis individuates a marked periodicity of 46 years, which is recognized above the 95% confidence level. Monte Carlo simulation shows that the oscillatory behavior is stable in respect of random errors on magnitude estimation. A parametric oscillatory model for the annual rate of seismicity is estimated by likelihood maximization under the hypothesis of inhomogeneous Poisson point process. According to the Akaike Information Criterion, such model outperforms the simpler homogeneous one with constant annual rate. A further element emerges form the analysis: so far, despite recent earthquakes, the Italian seismicity is still within a long-term decreasing trend established since the first half of the twentieth century.
Prevost, Luanna B; Smith, Michelle K; Knight, Jennifer K
2016-01-01
Previous work has shown that students have persistent difficulties in understanding how central dogma processes can be affected by a stop codon mutation. To explore these difficulties, we modified two multiple-choice questions from the Genetics Concept Assessment into three open-ended questions that asked students to write about how a stop codon mutation potentially impacts replication, transcription, and translation. We then used computer-assisted lexical analysis combined with human scoring to categorize student responses. The lexical analysis models showed high agreement with human scoring, demonstrating that this approach can be successfully used to analyze large numbers of student written responses. The results of this analysis show that students' ideas about one process in the central dogma can affect their thinking about subsequent and previous processes, leading to mixed models of conceptual understanding. © 2016 L. B. Prevost et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).
Vowel selection and its effects on perturbation and nonlinear dynamic measures.
Maccallum, Julia K; Zhang, Yu; Jiang, Jack J
2011-01-01
Acoustic analysis of voice is typically conducted on recordings of sustained vowel phonation. This study applied perturbation and nonlinear dynamic analyses to the vowels /a/, /i/, and /u/ in order to determine vowel selection effects on analysis. Forty subjects (20 males and 20 females) with normal voices participated in recording. Traditional parameters of fundamental frequency, signal-to-noise ratio, percent jitter, and percent shimmer were calculated for the signals using CSpeech. Nonlinear dynamic parameters of correlation dimension and second-order entropy were also calculated. Perturbation analysis results were largely incongruous in this study and in previous research. Fundamental frequency results corroborated previous work, indicating higher fundamental frequency for /i/ and /u/ and lower fundamental frequency for /a/. Signal-to-noise ratio results showed that /i/ and /u/ have greater harmonic levels than /a/. Results of nonlinear dynamic analysis suggested that more complex activity may be evident in /a/ than in /i/ or /u/. Percent jitter and percent shimmer may not be useful for description of acoustic differences between vowels. Fundamental frequency, signal-to-noise ratio, and nonlinear dynamic parameters may be applied to characterize /a/ as having lower frequency, higher noise, and greater nonlinear components than /i/ and /u/. Copyright © 2010 S. Karger AG, Basel.
Watson, Nathanial E; Prebihalo, Sarah E; Synovec, Robert E
2017-08-29
Comprehensive three-dimensional gas chromatography with time-of-flight mass spectrometry (GC 3 -TOFMS) creates an opportunity to explore a new paradigm in chemometric analysis. Using this newly described instrument and the well understood Parallel Factor Analysis (PARAFAC) model we present one option for utilization of the novel GC 3 -TOFMS data structure. We present a method which builds upon previous work in both GC 3 and targeted analysis using PARAFAC to simplify some of the implementation challenges previously discovered. Conceptualizing the GC 3 -TOFMS instead as a one-dimensional gas chromatograph with GC × GC-TOFMS detection we allow the instrument to create the PARAFAC target window natively. Each first dimension modulation thus creates a full GC × GC-TOFMS chromatogram fully amenable to PARAFAC. A simple mixture of 115 compounds and a diesel sample are interrogated through this methodology. All test analyte targets are successfully identified in both mixtures. In addition, mass spectral matching of the PARAFAC loadings to library spectra yielded results greater than 900 in 40 of 42 test analyte cases. Twenty-nine of these cases produced match values greater than 950. Copyright © 2017 Elsevier B.V. All rights reserved.
Data-driven mapping of hypoxia-related tumor heterogeneity using DCE-MRI and OE-MRI.
Featherstone, Adam K; O'Connor, James P B; Little, Ross A; Watson, Yvonne; Cheung, Sue; Babur, Muhammad; Williams, Kaye J; Matthews, Julian C; Parker, Geoff J M
2018-04-01
Previous work has shown that combining dynamic contrast-enhanced (DCE)-MRI and oxygen-enhanced (OE)-MRI binary enhancement maps can identify tumor hypoxia. The current work proposes a novel, data-driven method for mapping tissue oxygenation and perfusion heterogeneity, based on clustering DCE/OE-MRI data. DCE-MRI and OE-MRI were performed on nine U87 (glioblastoma) and seven Calu6 (non-small cell lung cancer) murine xenograft tumors. Area under the curve and principal component analysis features were calculated and clustered separately using Gaussian mixture modelling. Evaluation metrics were calculated to determine the optimum feature set and cluster number. Outputs were quantitatively compared with a previous non data-driven approach. The optimum method located six robustly identifiable clusters in the data, yielding tumor region maps with spatially contiguous regions in a rim-core structure, suggesting a biological basis. Mean within-cluster enhancement curves showed physiologically distinct, intuitive kinetics of enhancement. Regions of DCE/OE-MRI enhancement mismatch were located, and voxel categorization agreed well with the previous non data-driven approach (Cohen's kappa = 0.61, proportional agreement = 0.75). The proposed method locates similar regions to the previous published method of binarization of DCE/OE-MRI enhancement, but renders a finer segmentation of intra-tumoral oxygenation and perfusion. This could aid in understanding the tumor microenvironment and its heterogeneity. Magn Reson Med 79:2236-2245, 2018. © 2017 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. © 2017 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine.
Gaines, Tommi L.; Rusch, Melanie L.A.; Brouwer, Kimberly C.; Goldenberg, Shira M.; Lozada, Remedios; Robertson, Angela M.; Perkins, Emily; Strathdee, Steffanie A.; Patterson, Thomas L.
2013-01-01
In Tijuana, Mexico, sex work is regulated by the municipal government, through registration cards issued to female sex workers (FSWs) for an annual fee. Registration has been associated with decreased drug use and increase condom use and HIV testing. Previously, it was demonstrated that FSWs operating in bars were more likely than street-based FSWs to be registered. This implies that certain venues may be more accessible to local authorities for the enforcement of this type of programme. Taking a novel multilevel approach, we examined whether venue characteristics of bars reflecting greater organised management and visibility affect registration status of FSWs. In an analysis of venue-level characteristics, predictors of being registered were availability of free condoms at work and distance to the main sex strip; however, these were not independently associated after inclusion of FSWs’ income, illicit drug use and history of HIV testing. Our findings suggest that sex work regulations may inadvertently exclude venues in which the more vulnerable and less visible FSWs, such as injection drug users and those with limited financial resources, are situated. Efforts to revise or reconsider sex work regulations to ensure that they best promote FSWs’ health, human and labour rights are recommended. PMID:23534477
Gaines, Tommi L; Rusch, Melanie L A; Brouwer, Kimberly C; Goldenberg, Shira M; Lozada, Remedios; Robertson, Angela M; Perkins, Emily; Strathdee, Steffanie A; Patterson, Thomas L
2013-01-01
In Tijuana, Mexico, sex work is regulated by the municipal government, through registration cards issued to female sex workers (FSWs) for an annual fee. Registration has been associated with decreased drug use and increase condom use and HIV testing. Previously, it was demonstrated that FSWs operating in bars were more likely than street-based FSWs to be registered. This implies that certain venues may be more accessible to local authorities for the enforcement of this type of programme. Taking a novel multilevel approach, we examined whether venue characteristics of bars reflecting greater organised management and visibility affect registration status of FSWs. In an analysis of venue-level characteristics, predictors of being registered were availability of free condoms at work and distance to the main sex strip; however, these were not independently associated after inclusion of FSWs' income, illicit drug use and history of HIV testing. Our findings suggest that sex work regulations may inadvertently exclude venues in which the more vulnerable and less visible FSWs, such as injection drug users and those with limited financial resources, are situated. Efforts to revise or reconsider sex work regulations to ensure that they best promote FSWs' health, human and labour rights are recommended.
Genome-wide comparative analysis of four Indian Drosophila species.
Mohanty, Sujata; Khanna, Radhika
2017-12-01
Comparative analysis of multiple genomes of closely or distantly related Drosophila species undoubtedly creates excitement among evolutionary biologists in exploring the genomic changes with an ecology and evolutionary perspective. We present herewith the de novo assembled whole genome sequences of four Drosophila species, D. bipectinata, D. takahashii, D. biarmipes and D. nasuta of Indian origin using Next Generation Sequencing technology on an Illumina platform along with their detailed assembly statistics. The comparative genomics analysis, e.g. gene predictions and annotations, functional and orthogroup analysis of coding sequences and genome wide SNP distribution were performed. The whole genome of Zaprionus indianus of Indian origin published earlier by us and the genome sequences of previously sequenced 12 Drosophila species available in the NCBI database were included in the analysis. The present work is a part of our ongoing genomics project of Indian Drosophila species.
Working memory load modulation of parieto-frontal connections: evidence from dynamic causal modeling
Ma, Liangsuo; Steinberg, Joel L.; Hasan, Khader M.; Narayana, Ponnada A.; Kramer, Larry A.; Moeller, F. Gerard
2011-01-01
Previous neuroimaging studies have shown that working memory load has marked effects on regional neural activation. However, the mechanism through which working memory load modulates brain connectivity is still unclear. In this study, this issue was addressed using dynamic causal modeling (DCM) based on functional magnetic resonance imaging (fMRI) data. Eighteen normal healthy subjects were scanned while they performed a working memory task with variable memory load, as parameterized by two levels of memory delay and three levels of digit load (number of digits presented in each visual stimulus). Eight regions of interest, i.e., bilateral middle frontal gyrus (MFG), anterior cingulate cortex (ACC), inferior frontal cortex (IFC), and posterior parietal cortex (PPC), were chosen for DCM analyses. Analysis of the behavioral data during the fMRI scan revealed that accuracy decreased as digit load increased. Bayesian inference on model structure indicated that a bilinear DCM in which memory delay was the driving input to bilateral PPC and in which digit load modulated several parieto-frontal connections was the optimal model. Analysis of model parameters showed that higher digit load enhanced connection from L PPC to L IFC, and lower digit load inhibited connection from R PPC to L ACC. These findings suggest that working memory load modulates brain connectivity in a parieto-frontal network, and may reflect altered neuronal processes, e.g., information processing or error monitoring, with the change in working memory load. PMID:21692148
Secker, Jenny; Pittam, Gail; Ford, Fiona
2012-11-01
Pathways to Work is a UK initiative aimed at supporting customers on incapacity benefits to return to work. This qualitative study complements previous evaluations of Pathways to Work by exploring customers' perceptions of the impact of the Condition Management Programme (CMP) offered to claimants with long-term health conditions. 39 customers took part in focus groups held at the seven sites where Pathways was originally piloted. The main focus of the discussions was on perceptions of the ways in which participation had impacted on health, well-being and return to work. The discussions were audio-recorded and fully transcribed for analysis using a text analysis framework to enable the development and refinement of categories and overarching patterns in the data. Perceived impacts on health and well-being included a more positive outlook, social contact, changed perceptions of conditions and improvements in health. Some customers also reported an increase in their vocational activity and others felt ready to embark on new activities. Factors associated with positive outcomes included the extent and quality of contact with CMP staff and practical advice about condition management. Factors impeding positive employment outcomes related mainly to obstacles to returning to work. The results indicated that CMP can assist customers to learn about and manage their health conditions and increase their vocational activity, and that CMP therefore provides a promising means of enabling people with long-term health conditions to regain a fulfilling, productive life.
Return to work and cancer: the Australian experience.
McKay, Georgina; Knott, Vikki; Delfabbro, Paul
2013-03-01
Research suggests that for many cancer survivors, returning to work has a range of benefits. However, considerable barriers have been identified as influencing the quality of return to work outcomes. This study explored the perspectives of Australian cancer survivors, managers and employee assistance program (EAP) professionals to gain an understanding of the return to work process and factors that affect the experience. Focus groups and interviews were conducted with cancer survivors (n = 15), managers (n = 12), and EAP professionals / psychologists (n = 4) from public and private sectors. Thematic analysis was used to analyse the data to identify common and unique themes from the three participant groups. A range of drivers were identified including maintaining normality and regaining identity, which could act positively or negatively depending on survivors' coping ability and self awareness. Analysis revealed communication difficulties in the workplace that impact on emotional and practical support. Negotiating an employee's return is complex, influenced by the level of consultation with the employee and use of an ad hoc or structured process. Direct and indirect ways of supporting employees with cancer were identified, as was the need for colleague and manager support. This study supports previous research findings of the impact of cancer on work, and reveals managers' lack of knowledge on how to respond appropriately. The process of returning to work is complex, influenced by employees' and managers' attitudes, communication skills and coping abilities. Areas for workplace interventions to optimise support for the cancer survivor are described.
Augustine, Adam A; Hemenover, Scott H
2013-05-01
In their examination of the effectiveness of affect regulation strategies, Webb, Miles, and Sheeran (2012) offered the results of a broad meta-analysis of studies on regulatory interventions. Their analysis provides an alternative to our earlier, more focused meta-analysis of the affect regulation literature (Augustine & Hemenover, 2009). Unfortunately, there are a number of errors and omissions in this new meta-analysis that could lead to misconceptions regarding both our previous work and the state of the affect regulation literature. In this comment, we examine the impact of methodological issues, inconsistent inclusion criteria, variance in manipulations, and what we perceive to be a subjective and inconsistent selection of effect sizes on the accuracy and generalizability of Webb and colleagues' estimates of affect regulation strategy effectiveness. PsycINFO Database Record (c) 2013 APA, all rights reserved.
An introduction to Item Response Theory and Rasch Analysis of the Eating Assessment Tool (EAT-10).
Kean, Jacob; Brodke, Darrel S; Biber, Joshua; Gross, Paul
2018-03-01
Item response theory has its origins in educational measurement and is now commonly applied in health-related measurement of latent traits, such as function and symptoms. This application is due in large part to gains in the precision of measurement attributable to item response theory and corresponding decreases in response burden, study costs, and study duration. The purpose of this paper is twofold: introduce basic concepts of item response theory and demonstrate this analytic approach in a worked example, a Rasch model (1PL) analysis of the Eating Assessment Tool (EAT-10), a commonly used measure for oropharyngeal dysphagia. The results of the analysis were largely concordant with previous studies of the EAT-10 and illustrate for brain impairment clinicians and researchers how IRT analysis can yield greater precision of measurement.
Uncertainty and Sensitivity Analysis of Afterbody Radiative Heating Predictions for Earth Entry
NASA Technical Reports Server (NTRS)
West, Thomas K., IV; Johnston, Christopher O.; Hosder, Serhat
2016-01-01
The objective of this work was to perform sensitivity analysis and uncertainty quantification for afterbody radiative heating predictions of Stardust capsule during Earth entry at peak afterbody radiation conditions. The radiation environment in the afterbody region poses significant challenges for accurate uncertainty quantification and sensitivity analysis due to the complexity of the flow physics, computational cost, and large number of un-certain variables. In this study, first a sparse collocation non-intrusive polynomial chaos approach along with global non-linear sensitivity analysis was used to identify the most significant uncertain variables and reduce the dimensions of the stochastic problem. Then, a total order stochastic expansion was constructed over only the important parameters for an efficient and accurate estimate of the uncertainty in radiation. Based on previous work, 388 uncertain parameters were considered in the radiation model, which came from the thermodynamics, flow field chemistry, and radiation modeling. The sensitivity analysis showed that only four of these variables contributed significantly to afterbody radiation uncertainty, accounting for almost 95% of the uncertainty. These included the electronic- impact excitation rate for N between level 2 and level 5 and rates of three chemical reactions in uencing N, N(+), O, and O(+) number densities in the flow field.
Optimization of Limestone Feed Size of a Pressurized Fluidized Bed Combustor
NASA Astrophysics Data System (ADS)
Shimizu, Tadaaki; Saastamolnen, Jaakko
Limestone attrition is a major cause of loss of limestone during pressurized fluidized bed combustion. In the authors' previous works, the analysis of published results of solid attrition and desulfurization was conducted to determine the attrition rate expression. The specific attrition rate (rate of decrease in diameter) was estimated to be second order with respect to particle diameter in the previous work. This rate expression implies that reduction of feed size of limestone is effective for suppression of loss of limestone by attrition. However, too much grinding of raw limestone will increase the content of fine particles that are readily elutriated by gas stream and do not contribute to the sulfur capture. In this work, modeling works are conducted for particle attrition and desulfurization in order to predict the effect of feed size of limestone on total consumption of limestone and desulfurization is discussed. Optimum particle size to suppress limestone consumption was approximately 0.7 mm (as D p50 ). However, the control of solid drain rate from the bottom was found to have more influence on total limestone consumption rate. Emissions of SO2 from low sulfur coal (S=0.33%) could be sufficiently low irrespective of limestone feed size but SO2 emissions from coals with higher sulfur content than 0.5% were anticipated to increase drastically. Such drastic change in SO2 emissions with the change in sulfur content is attributable to non-linear nature of reaction rate for attrition-enhanced desulfurization by limestone.
Vajda, E G; Skedros, J G; Bloebaum, R D
1998-10-01
Backscattered electron (BSE) imaging has proven to be a useful method for analyzing the mineral distribution in microscopic regions of bone. However, an accepted method of standardization has not been developed, limiting the utility of BSE imaging for truly quantitative analysis. Previous work has suggested that BSE images can be standardized by energy-dispersive x-ray spectrometry (EDX). Unfortunately, EDX-standardized BSE images tend to underestimate the mineral content of bone when compared with traditional ash measurements. The goal of this study is to investigate the nature of the deficit between EDX-standardized BSE images and ash measurements. A series of analytical standards, ashed bone specimens, and unembedded bone specimens were investigated to determine the source of the deficit previously reported. The primary source of error was found to be inaccurate ZAF corrections to account for the organic phase of the bone matrix. Conductive coatings, methylmethacrylate embedding media, and minor elemental constituents in bone mineral introduced negligible errors. It is suggested that the errors would remain constant and an empirical correction could be used to account for the deficit. However, extensive preliminary testing of the analysis equipment is essential.
Development of a Bayesian Belief Network Runway Incursion and Excursion Model
NASA Technical Reports Server (NTRS)
Green, Lawrence L.
2014-01-01
In a previous work, a statistical analysis of runway incursion (RI) event data was conducted to ascertain the relevance of this data to the top ten Technical Challenges (TC) of the National Aeronautics and Space Administration (NASA) Aviation Safety Program (AvSP). The study revealed connections to several of the AvSP top ten TC and identified numerous primary causes and contributing factors of RI events. The statistical analysis served as the basis for developing a system-level Bayesian Belief Network (BBN) model for RI events, also previously reported. Through literature searches and data analysis, this RI event network has now been extended to also model runway excursion (RE) events. These RI and RE event networks have been further modified and vetted by a Subject Matter Expert (SME) panel. The combined system-level BBN model will allow NASA to generically model the causes of RI and RE events and to assess the effectiveness of technology products being developed under NASA funding. These products are intended to reduce the frequency of runway safety incidents/accidents, and to improve runway safety in general. The development and structure of the BBN for both RI and RE events are documented in this paper.
Non-iterative determination of the stress-density relation from ramp wave data through a window
NASA Astrophysics Data System (ADS)
Dowling, Evan; Fratanduono, Dayne; Swift, Damian
2017-06-01
In the canonical ramp compression experiment, a smoothly-increasing load is applied the surface of the sample, and the particle velocity history is measured at interfaces two or more different distances into the sample. The velocity histories are used to deduce a stress-density relation by correcting for perturbations caused by reflected release waves, usually via the iterative Lagrangian analysis technique of Rothman and Maw. We previously described a non-iterative (recursive) method of analysis, which was more stable and orders of magnitude faster than iteration, but was subject to the limitation that the free surface velocity had to be sampled at uniform intervals. We have now developed more general recursive algorithms suitable for analyzing ramp data through a finite-impedance window. Free surfaces can be treated seamlessly, and the need for uniform velocity sampling has been removed. These calculations require interpolation of partially-released states using the partially-constructed isentrope, making them slower than the previous free-surface scheme, but they are still much faster than iterative analysis. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
Learning from Trending, Precursor Analysis, and System Failures
DOE Office of Scientific and Technical Information (OSTI.GOV)
Youngblood, R. W.; Duffey, R. B.
2015-11-01
Models of reliability growth relate current system unreliability to currently accumulated experience. But “experience” comes in different forms. Looking back after a major accident, one is sometimes able to identify previous events or measurable performance trends that were, in some sense, signaling the potential for that major accident: potential that could have been recognized and acted upon, but was not recognized until the accident occurred. This could be a previously unrecognized cause of accidents, or underestimation of the likelihood that a recognized potential cause would actually operate. Despite improvements in the state of practice of modeling of risk and reliability,more » operational experience still has a great deal to teach us, and work has been going on in several industries to try to do a better job of learning from experience before major accidents occur. It is not enough to say that we should review operating experience; there is too much “experience” for such general advice to be considered practical. The paper discusses the following: 1. The challenge of deciding what to focus on in analysis of operating experience. 2. Comparing what different models of learning and reliability growth imply about trending and precursor analysis.« less
NASA Astrophysics Data System (ADS)
Gambacorta, A.; Barnet, C.; Sun, F.; Goldberg, M.
2009-12-01
We investigate the water vapor component of the greenhouse effect in the tropical region using data from the Atmospheric InfraRed Sounder (AIRS). Differently from previous studies who have relayed on the assumption of constant lapse rate and performed coarse layer or total column sensitivity analysis, we resort to AIRS high vertical resolution to measure the greenhouse effect sensitivity to water vapor along the vertical column. We employ a "partial radiative perturbation" methodology and discriminate between two different dynamic regimes, convective and non-convective. This analysis provides useful insights on the occurrence and strength of the water vapor greenhouse effect and its sensitivity to spatial variations of surface temperature. By comparison with the clear-sky computation conducted in previous works, we attempt to confine an estimate for the cloud contribution to the greenhouse effect. Our results compare well with the current literature, falling in the upper range of the existing global circulation model estimates. We value the results of this analysis as a useful reference to help discriminate among model simulations and improve our capability to make predictions about the future of our climate.
Need for recovery from work and sleep-related complaints among nursing professionals.
Silva-Costa, Aline; Griep, Rosane Harter; Fischer, Frida Marina; Rotenberg, Lúcia
2012-01-01
The concept of need for recovery from work (NFR) was deduced from the effort recuperation model. In this model work produces costs in terms of effort during the working day. When there is enough time and possibilities to recuperate, a worker will arrive at the next working day with no residual symptoms of previous effort. NFR evaluates work characteristics such as psychosocial demands, professional work hours or schedules. However, sleep may be an important part of the recovery process. The aim of the study was to test the association between sleep-related complaints and NFR. A cross-sectional study was carried out at three hospitals. All females nursing professionals engaged in assistance to patients were invited to participate (N = 1,307). Participants answered a questionnaire that included four sleep-related complaints (insomnia, unsatisfactory sleep, sleepiness during work hours and insufficient sleep), work characteristics and NRF scale. Binomial logistic regression analysis showed that all sleep-related complaints are associated with a high need for recovery from work. Those who reported insufficient sleep showed a greater chance of high need for recovery; OR=2.730 (CI 95% 2.074 - 3.593). These results corroborate the hypothesis that sleep is an important aspect of the recovery process and, therefore, should be thoroughly investigated.
Occupational Physicians’ Reasoning about Recommending Early Return to Work with Work Modifications
Horppu, Ritva; Martimo, Kari-Pekka; Viikari-Juntura, Eira; Lallukka, Tea; MacEachen, Ellen
2016-01-01
Previous research indicates that work modifications can effectively enhance return to work (RTW) at an early stage of work disability. We aimed to examine how occupational physicians (OPs) reason about recommending early return to work (RTW) with work modifications. Pre-defined propositions regarding the use of work modifications in promoting early RTW were discussed in four focus groups with altogether 11 Finnish OPs. Discussions were audio recorded, and the transcribed data were analyzed using qualitative content analysis. Five different rationales for supporting early RTW were identified: to manage medical conditions, to enhance employee well-being, to help workplace stakeholders, to reduce costs to society, and to enhance OP’s own professional fulfillment. However, OPs identified situations and conditions in which early RTW may not be suitable. In addition, there were differences between the OPs in the interpretation of the rationales, suggesting variation in clinical practice. In conclusion, encouraging early RTW with work modifications was perceived by OPs as a meaningful task and, to a large extent, beneficial for employees and several stakeholders. However, this practice was not accepted without consideration to the RTW situation and context. If early RTW and work modifications are to be promoted, OPs should be offered education that addresses their views regarding this practice. PMID:27367908
Processing of a Mullite Matrix, Molybdenum Disilicide Reinforced Composite
1991-01-01
at high temperatures (best of the silicides and almost as good as SiC) is due to the formation of protective SiO2 layers on the surface of the MoSi 2...of the precipitation preparation process) consisted largely of sodium . Previous work 52 showed that the particle size was 160 A (TEM analysis) not...M.K. Brun, L.E. Szala, "Kinetics of Oxidation of Carbide and Silicide Dispersed Phases in Oxide Matrices," Adv. Ceram. Mat., 3 [5] 491-497 (1988). 5
2008-01-01
surrogate” acrolein, which was synthesized from vinyl acetate (Scheme 11, upper equation )31. This mild method was an improvement over their previous work...11, lower equation ). Both cyclizations were facile with N,S-acetals bearing strongly activating groups on aniline. The resulting 2-methylthio...kinetic studies of the MS rearrangement.144 Using a combination of Hammett analysis of substituent effects and solvent isotope effects, Edens concluded
A fundamental approach to adhesion: Synthesis, surface analysis, thermodynamics and mechanics
NASA Technical Reports Server (NTRS)
Dwight, D. W.; Wightman, J. P.
1977-01-01
The effects of composites as adherends was studied. Several other variables were studied by fractography: aluminum powder adhesive filler, fiber glass cloth scrim or adhesive carrier, new adhesives PPQ-413 and LARC-13, and strength-test temperature. When the new results were juxtaposed with previous work, it appeared that complex interactions between adhesive, adherend, bonding, and testing conditions govern the observed strength and fracture-surface features. The design parameters likely to have a significant effect upon strength-test results are listed.
A Hydrodynamic Model of Transport in the Wheat Ear
NASA Technical Reports Server (NTRS)
Stieber, Joseph; Stieber, Joli; Bubenheim, David L.; Kliss, Mark (Technical Monitor)
1996-01-01
The vascular arrangement in the main axis (rachis) of the wheat ear, studied and reported in a previous paper by the same, described a circuit-cascade system consisting of capacitance and resistance passages (so-called RC-circuits). Some hydromechanic aspects (e.g., resonance, impulse control) of this asymmetric transport system and their possible role and importance in the fluid supply are discussed. A theoretical analysis of how this system works, as well as samples of practical application are presented.
Betancourt, M.
2016-12-13
A precise understanding of quasi-elastic interactions is crucial to measure neutrino oscillations. The MINERvA experiment is currently working on different analyses of muon neutrino charged current quasi-elastic interactions. Here, we present updates to the previous quasi-elastic measurement, using a new flux, and we present the status of several analyses in progress; including double differential cross sections, a study of final state interactions using a sample with muon and a proton and the status of the CCQE analysis in the medium energy neutrino beam.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kupper, L.L.; Setzer, R.W.; Schwartzbaum, J.
1987-07-01
This document reports on a reevaluation of data obtained in a previous report on occupational factors associated with the development of malignant melanomas at Lawrence Livermore National Laboratory. The current report reduces the number of these factors from five to three based on a rigorous statistical analysis of the original data. Recommendations include restructuring the original questionnaire and trying to contact more individuals that worked with volatile photographic chemicals. 17 refs., 7 figs., 22 tabs. (TEM)
[The Significance of Work Motivation for Rehabilitation Success].
Kessemeier, Franziska; Stöckler, Christiane; Petermann, Franz; Bassler, Markus; Pfeiffer, Wolfgang; Kobelt, Axel
2017-11-28
Aim of this study Apart from the reduction of symptoms and the restoration of working ability, return to work is a long-term goal of medical rehabilitation. The aim of this study is to analyze the influence of work motivation on the outcome of rehabilitation. Methods The data basis consists of N=998 patients at the psychosomatic department of the Oberharz Rehabilitation Center as well as data from insurance accounts. Using multiple linear regression analysis the predictive power of work motivation on rehabilitation outcome as well as different facets of work motivation in their function as predictors are analyzed. Results Only minor statistical relations could be found between work motivation and rehabilitation success when also taking employment status of the previous year and subjective vocational disability into account. A small predictive power can be attributed to work motivation as a factor in rehabilitation success in the sense of a reduction of symptoms. Particular facets of work motivation are suitable to predict rehabilitation success. Patients with a work motivation risk profile differ from patients with a normal work motivation profile as regards their capacity to work in the year following rehabilitation treatment. Conclusion Work motivation represents a relevant construct in rehabilitation success but is strongly influenced by individual factors. During rehabilitation, individual problems which influence work motivation should be taken into account more strongly. © Georg Thieme Verlag KG Stuttgart · New York.
Carlson, Elisabeth; Rämgård, Margareta; Bolmsjö, Ingrid; Bengtsson, Mariette
2014-05-01
In Sweden, as well as in most industrialised countries, an increasing older population is expected to create a growing demand for health care staff. Previous studies have pointed to lack of proficient medical and nursing staff specialised in geriatric care, which poses serious threats to the care of a vulnerable population. At the same time, there are studies describing elderly care as a low-status career choice, attracting neither nurses nor student nurses. Judging from previous research it was deemed important to explore how nurses in elderly care perceive their work, thus possibly provide vital knowledge that can guide nurse educators and unit managers as a means to promote a career in elderly care. The aim of the present study was to illuminate how nurses, working in nursing homes and home-based care, perceived their professional work. This was a qualitative study using focus groups. 30 registered nurses in seven focus groups were interviewed. The participants worked in nursing homes and home-based care for the elderly in rural areas and in a larger city in southern Sweden. The interviews were analysed in line with the tradition of naturalistic inquiry. Our findings illustrate how nurses working in elderly care perceived their professional work as holistic and respectful nursing. Three categories of professional work emerged during analysis: (1) establishing long-term relationships, (2) nursing beyond technical skills, and (3) balancing independence and a sense of loneliness. The findings are important as they represent positive alternatives to the somewhat prevailing view on elderly care as depressing and undemanding. Nurse educators might use the key aspects as good examples, thus influencing student nurses' attitudes towards elderly care in a positive way. Elderly care agencies might find them helpful when recruiting and retaining nurses to a much needed area. Copyright © 2013 Elsevier Ltd. All rights reserved.
Holmlund, Lisa; Guidetti, Susanne; Eriksson, Gunilla; Asaba, Eric
2017-08-09
The aim of this follow-up study was to explore experiences of return to work in the context of everyday life among adults 7-11 years after spinal cord injury (SCI). This study used in-depth interviews and observations in a qualitative design with eight persons who had previously been interviewed in 2008. A narrative approach was used during data gathering and analysis. Return to work was experienced as something constantly needing to be negotiated in the context of everyday life. Several years after SCI expectations for work and perceptions of possibilities for meaningful work had changed. Five main themes were identified through the analysis, (1) negotiating the possibilities of working, (2) hope for future work tempered with concern, (3) education as a possible path to employment, (4) paths toward return to work in light of unmet support, and (5) unpaid occupations grounded in interest and competence. Persons who have no higher education or lack viable employment to return to after SCI seem to be vulnerable in return to work. Early and timely interventions tailored to the person's interests and competencies, in which the rehabilitation team has a distinct coordinating role, are thus critical in return to work. Implications for Rehabilitation Tensions between hope and expectations for work and unmet needs of support can lead to barriers in return to work, particularly for those who have no higher education or lack employment to return to after spinal cord injury. Rehabilitation after spinal cord injury can benefit from focus on how the balance of work fits into routines in the context of everyday life. Early and timely interventions integrating the person's interests and competencies in return to work after spinal cord injury in combination with having a health care provider who has a distinct coordinating role are critical.
Shift work, job strain and changes in the body mass index among women: a prospective study.
Fujishiro, Kaori; Lividoti Hibert, Eileen; Schernhammer, Eva; Rich-Edwards, Janet W
2017-06-01
The effects of job strain and shift work on weight gain have not been studied jointly. Cross-sectional and longitudinal studies on shift work and weight gain have reported different results. This study examines potential effect modification by job strain on the link between shift work and weight gain, and concurrent and delayed effects of shift work on weight gain. Data came from 52 622 women who participated in the Nurses' Health Study II, a prospective cohort study. Using linear regression, we modelled change in body mass index (BMI) over 4 years as a function of change in job strain, cumulative exposure to rotating night shift previously and during the 4 years (ie, previous and concurrent exposures) and the interaction between job strain and concurrent shift work exposure. Age, race/ethnicity, pregnancy history, baseline BMI, job types and health behaviours at baseline were controlled for. Job strain and rotating shift work, concurrent and previous, all had independent associations with BMI change during the 4-year period. There was no evidence for effect modification by job strain. Concurrent and previous exposures to rotating night shift had different associations with BMI change: an inverted U-shape for concurrent exposure (ranging from 0.01 to 0.14 kg/m 2 increase), a dose-response for previous exposure (-0.02 to 0.09 kg/m 2 ). Job strain and rotating night shift work have independent contributions to weight gain. Reducing job strain and supporting night shift workers are both important intervention goals. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.