Assessing Angle's malocclusion among cleft lip and/or palate patients in Jammu.

PubMed

Gupta, Akshay; Gupta, Anur; Bhardwaj, Amit; Vikram, S; Gomathi, Ajeetha; Singh, Karanprakash

2016-04-01

The study was conducted to examine the patients with abnormalities of cleft lip and/or palate and its association with different types of malocclusion. This descriptive study was done among 168 patients with abnormalities of cleft lip and/or palate. Angle's classification of malocclusion was applied for assessment of occlusion as Class I, Class II, and Class III. The types of oral clefts classification such as cleft lip unilateral and cleft lip bilateral, cleft palate (CP), unilateral cleft lip with palate (UCLP) and bilateral cleft lip with palate (BCLP) was considered. Chi-square test was applied to analyze the data at P < 0.05. The study showed different categories of clefts patients as cleft lip (81), CP (31), and both cleft lip and palate (53). The occurrence of unilateral cleft lip (44) was maximum among the sample followed by UCLP (39), and bilateral cleft lip (31). Maximum subjects with Class II (10.7%) and Class III (4.9%) malocclusion were seen with unilateral cleft lip deformities. None of the patients with UCLP had Class III malocclusion. Cleft lip was the most commonly observed deformity and high frequency of Class II and III malocclusion was evident. Therefore, patients with such abnormalities should be screened timely.

Soft tissue thin-plate spline analysis of pre-pubertal Korean and European-Americans with untreated Angle's Class III malocclusions.

PubMed

Singh, G D; McNamara, J A; Lozanoff, S

1999-01-01

The purpose of this study was to assess soft tissue facial matrices in subjects of diverse ethnic origins with underlying dentoskeletal malocclusions. Pre-treatment lateral cephalographs of 71 Korean and 70 European-American children aged between 5 and 11 years with Angle's Class III malocclusions were traced, and 12 homologous, soft tissue landmarks digitized. Comparing mean Korean and European-American Class III soft tissue profiles, Procrustes analysis established statistical difference (P < 0.001) between the configurations, and this difference was also true at all seven age groups tested (P < 0.001). Comparing the overall European-American and Korean transformation, thin-plate spline analysis indicated that both affine and non-affine transformations contribute towards the total spline (deformation) of the averaged Class III soft tissue configurations. For non-affine transformations, partial warp (PW) 8 had the highest magnitude, indicating large-scale deformations visualized as labio-mental protrusion, predominantly. In addition, PW9, PW4, and PW5 also had high magnitudes, demonstrating labio-mental vertical compression and antero-posterior compression of the lower labio-mental soft tissues. Thus, Korean children with Class III malocclusions demonstrate antero-posterior and vertical deformations of the labio-mental soft tissue complex with respect to their European-American counterparts. Morphological heterogeneity of the soft tissue integument in subjects of diverse ethnic origin may obscure the underlying skeletal morphology, but the soft tissue integument appears to have minimal ontogenetic association with Class III malocclusions.

Retrospective 25-year follow-up of treatment outcomes in angle Class III patients : Early versus late treatment.

PubMed

Wendl, B; Muchitsch, A P; Winsauer, H; Walter, A; Droschl, H; Jakse, N; Wendl, M; Wendl, T

2017-05-01

To assess early versus late treatment of Class III syndrome for skeletal and dental differences. Thirty-eight Class III patients treated with a chincup were retrospectively analyzed. Baseline data were obtained by reviewing pretreatment (T0) anamnestic records, cephalograms, and casts. The cases were assigned to an early or a late treatment group based on age at T0 (up to 9 years or older than 9 years but before the pubertal growth spurt). Both groups were further compared based on posttreatment data (T1) and long-term follow-up data collected approximately 25 years after treatment (T2). Early treatment was successful in 74% and late treatment in 67% of cases. More failures were noted among male patients. The late treatment group was characterized post therapeutically by significantly more pronounced skeletal parameters of jaw size relative to normal Class I values; in addition, a greater skeletal discrepancy between maxilla and mandible, higher values for mandibular length, Cond-Pog, ramus height, overjet, anterior posterior dysplasia indicator (APDI), lower anterior face height, and gonial angle were measured at T1. The angle between the AB line and mandibular plane was found to be larger at T0, T1, and T2, as well as more pronounced camouflage positions of the lower anterior teeth at T0. The early treatment group was found to exhibit greater amounts of negative overjet at T0 but more effective correction at T1. Early treatment of Class III syndrome resulted in greater skeletal changes with less dental compensation.

Components of soft tissue deformations in subjects with untreated angle's Class III malocclusions: thin-plate spline analysis.

PubMed

Singh, G D; McNamara, J A; Lozanoff, S

1998-01-01

While the dynamics of maxillo-mandibular allometry associated with treatment modalities available for the management of Class III malocclusions currently are under investigation, developmental aberration of the soft tissues in untreated Class III malocclusions requires specification. In this study, lateral cephalographs of 124 prepubertal European-American children (71 with untreated Class III malocclusion; 53 with Class I occlusion) were traced, and 12 soft-tissue landmarks digitized. Resultant geometries were scaled to an equivalent size and mean Class III and Class I configurations compared. Procrustes analysis established statistical difference (P < 0.001) between the mean configurations. Comparing the overall untreated Class III and Class I configurations, thin-plate spline (TPS) analysis indicated that both affine and non-affine transformations contribute towards the deformation (total spline) of the averaged Class III soft tissue configuration. For non-affine transformations, partial warp 8 had the highest magnitude, indicating large-scale deformations visualized as a combination of columellar retrusion and lower labial protrusion. In addition, partial warp 5 also had a high magnitude, demonstrating upper labial vertical compression with antero-inferior elongation of the lower labio-mental soft tissue complex. Thus, children with Class III malocclusions demonstrate antero-posterior and vertical deformations of the maxillary soft tissue complex in combination with antero-inferior mandibular soft tissue elongation. This pattern of deformations may represent gene-environment interactions, resulting in Class III malocclusions with characteristic phenotypes, that are amenable to orthodontic and dentofacial orthopedic manipulations.

Cone Beam Computed Tomography Analysis in 3D Position of Maxillary Denture

PubMed Central

Jia, Ying; Yang, Hua; Li, Ping; Xiong, Jiangyan; Chen, Bo

2017-01-01

Abstract The dynamic correlation between teeth and denture morphology as well as the morphological positions needs to be explored. Methodology 63 adult patients with skeletal class III malocclusions that met the inclusion criteria were enrolled and imaged with Cone Beam Computed Tomography (CBCT), and Digital Imaging and Communications in Medicine (DICOM) data were collected. The torque angle and axial inclination were measured and analyzed for the corona, root, and entire body of every tooth on the maxilla. Results There is a statistically significant difference between the coronal axial inclination/coronal torque angle for the skeletal class III malocclusion cases and Andrew’s six keys of occlusion. On the sagittal plane of the maxillary denture (except that the secondary molar is inclined medial-distally), the remaining teeth are inclined towards the labia with slightly larger angles compared to the normal occlusion. In the coronal direction, the maxillary anterior teeth tend to have a corona that inclines medial-distally, whereas the posterior teeth have a buccal inclination compared to the normal occlusion. Conclusion Sagittal and transversal compensations prevail in maxillary dentures; for the camouflaged treatment design for skeletal class III, there is limited scope of sagittal and transversal movements on the maxillary denture. PMID:29104942

A study of Class III treatment: orthodontic camouflage vs orthognathic surgery.

PubMed

Georgalis, Katherine; Woods, Michael G

2015-11-01

To evaluate the differences in pretreatment and post-treatment characteristics of Class III patients treated with orthodontic camouflage or orthognathic surgery, and to compare the range of skeletal, dental and soft tissue changes that are likely to occur with treatment, with particular reference to the influence of extractions on the resultant incisor angulations. Pretreatment and post-treatment cephalograms of 31 Class III orthodontically-camouflaged patients and 36 Class III surgical patients (without genioplasty) were obtained from one specialist practice. From the surgical group, 26 pre-surgical lateral cephalograms were also obtained. Inclusion criteria for the two groups were at least three of the following: (1) an ANB angle of 1 degree or less, (2) a Wits appraisal less than -4 mm, (3) an incisal overjet ≤ 0 mm, and (14) a Class III molar relationship. All lateral cephalograms were traced and digitised and a number of skeletal, dental and soft tissue variables were measured. The camouflage and surgical groups were also divided into premolar extraction and non-extraction subgroups to allow for a specific analysis of extraction effects. Before treatment, the surgical group demonstrated, on average, a more severe skeletal discrepancy and increased dental compensations, compared with the orthodontically camouflaged group. After treatment, the mean SNA angle was greater, the ANB angle was more positive, the Wits appraisal was closer to ideal and the lower incisors were less retroclined in the surgery group. There was a small mean reduction in horizontal chin projection in the surgery group compared with a small increase in the camouflage group. The mentolabial fold and the lower lip curve were deeper, on average, and the lips less retrusive after surgery. There was a mean increase in upper incisor proclination during treatment in both the surgical and camouflage groups with a greater increase in the camouflage group. There was a significant reduction in upper incisor proclination and a subsequent greater increase in the ANB angle associated with upper premolar extractions in the surgical group compared with the non-extraction group. Lower premolar extractions in the camouflage group resulted only in a deeper mentolabial fold compared with those treated without lower extractions. Class III patients selected for surgical treatment are likely to have more severe pretreatment dental and skeletal discrepancies than those selected for camouflage treatment. Surgical treatment is associated with significant decompensation of the lower incisors but, ultimately, not the upper incisors. Class III patients treated with either camouflage or surgery treatment are likely to finish with slightly proclined upper incisors. Generally, surgical treatment results in greater skeletal change, involving normalisation of the skeletal base relationship, a reduction in chin prominence, fuller lips, and a more favourable lip and chin contour.

Radiographic assessment of lower third molar eruption in different anteroposterior skeletal patterns and age-related groups.

PubMed

Jakovljevic, Aleksandar; Lazic, Emira; Soldatovic, Ivan; Nedeljkovic, Nenad; Andric, Miroslav

2015-07-01

To analyze radiographic predictors for lower third molar eruption among subjects with different anteroposterior skeletal relations and of different age groups. In total, 300 lower third molars were recorded on diagnostic digital orthopantomograms (DPTs) and lateral cephalograms (LCs). The radiographs were grouped according to sagittal intermaxillary angle (ANB), subject age, and level of lower third molar eruption. The DPT was used to analyze retromolar space, mesiodistal crown width, space/width ratio, third and second molar angulation (α, γ), third molar inclination (β), and gonion angle. The LC was used to determine ANB, angles of maxillar and mandibular prognathism (SNA, SNB), mandibular plane angle (SN/MP), and mandibular lengths. A logistic regression model was created using the statistically significant predictors. The logistic regression analysis revealed a statistically significant impact of β angle and distance between gonion and gnathion (Go-Gn) on the level of lower third molar eruption (P < .001 and P < .015, respectively). The retromolar space was significantly increased in the adult subgroup for all skeletal classes. The lower third molar impaction rate was significantly higher in the adult subgroup with the Class II (62.3%) compared with Class III subjects (31.7%; P < .013). The most favorable values of linear and angular predictors of mandibular third molar eruption were measured in Class III subjects. For valid estimation of mandibular third molar eruption, certain linear and angular measures (β angle, Go-Gn), as well as the size of the retromolar space, need to be considered.

Lower incisor dentoalveolar compensation and symphysis dimensions among Class I and III malocclusion patients with different facial vertical skeletal patterns.

PubMed

Molina-Berlanga, Núria; Llopis-Perez, Jaume; Flores-Mir, Carlos; Puigdollers, Andreu

2013-11-01

To compare lower incisor dentoalveolar compensation and mandible symphysis morphology among Class I and Class III malocclusion patients with different facial vertical skeletal patterns. Lower incisor extrusion and inclination, as well as buccal (LA) and lingual (LP) cortex depth, and mandibular symphysis height (LH) were measured in 107 lateral cephalometric x-rays of adult patients without prior orthodontic treatment. In addition, malocclusion type (Class I or III) and facial vertical skeletal pattern were considered. Through a principal component analysis (PCA) related variables were reduced. Simple regression equation and multivariate analyses of variance were also used. Incisor mandibular plane angle (P < .001) and extrusion (P  =  .03) values showed significant differences between the sagittal malocclusion groups. Variations in the mandibular plane have a negative correlation with LA (Class I P  =  .03 and Class III P  =  .01) and a positive correlation with LH (Class I P  =  .01 and Class III P  =  .02) in both groups. Within the Class III group, there was a negative correlation between the mandibular plane and LP (P  =  .02). PCA showed that the tendency toward a long face causes the symphysis to elongate and narrow. In Class III, alveolar narrowing is also found in normal faces. Vertical facial pattern is a significant factor in mandibular symphysis alveolar morphology and lower incisor positioning, both for Class I and Class III patients. Short-faced Class III patients have a widened alveolar bone. However, for long-faced and normal-faced Class III, natural compensation elongates the symphysis and influences lower incisor position.

Severe Angle Class III skeletal malocclusion associated to mandibular prognathism: orthodontic-surgical treatment

PubMed Central

Souki, Marcelo Quiroga

2016-01-01

ABSTRACT The present case report describes the orthodontic treatment of a young adult patient (18y / 1m), Class III skeletal malocclusion, with mandibular prognathism and significant dental compensation. The canine relation was Class III, incisors with tendency to crossbite and open bite, moderate inferior crowding, and concave profile. Skeletal correction of malocclusion, facial profile harmony with satisfactory labial relationship, correction of tooth compensation and normal occlusal relationship were obtained with orthodontic treatment associated to orthognathic surgery. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO), as part of the requirements to become a BBO diplomate. PMID:28125146

Influence of the cranial base flexion on Class I, II and III malocclusions: a systematic review.

PubMed

Almeida, Kélei Cristina Mathias de; Raveli, Taísa Boamorte; Vieira, Camila Ivini Viana; Santos-Pinto, Ary Dos; Raveli, Dirceu Barnabé

2017-01-01

The aim of this study was to perform a systematic review on the morphological characteristics of the skull base (flexion, anterior length and posterior length) and the concomitant development of malocclusions, by comparing differences in dimorphism, ethnicity and age. The articles were selected by means of electronic search on BBO, MEDLINE and LILACS databases from 1966 to 2016. A qualitative evaluation of the methodologies used on the articles was also performed. Although the literature on this topic is abundant, only 16 articles were selected for the present systematic review. The cranial base angle itself does not seem to play a significant role in the development of malocclusions. In fact, the cranial base angle is relatively stable at the ages of 5 to 15 years. A more obtuse angle at the skull base, in association or not with a greater anterior length of the cranial base, can contribute to the development of Class II division 1 malocclusions. On the other hand, a more acute angle at the skull base can contribute to a more anterior positioning of the mandible and to the development of Class III malocclusions.

Influence of the cranial base flexion on Class I, II and III malocclusions: a systematic review

PubMed Central

de Almeida, Kélei Cristina Mathias; Raveli, Taísa Boamorte; Vieira, Camila Ivini Viana; dos Santos-Pinto, Ary; Raveli, Dirceu Barnabé

2017-01-01

ABSTRACT Objective: The aim of this study was to perform a systematic review on the morphological characteristics of the skull base (flexion, anterior length and posterior length) and the concomitant development of malocclusions, by comparing differences in dimorphism, ethnicity and age. Methods: The articles were selected by means of electronic search on BBO, MEDLINE and LILACS databases from 1966 to 2016. A qualitative evaluation of the methodologies used on the articles was also performed. Results: Although the literature on this topic is abundant, only 16 articles were selected for the present systematic review. The cranial base angle itself does not seem to play a significant role in the development of malocclusions. In fact, the cranial base angle is relatively stable at the ages of 5 to 15 years. Conclusions: A more obtuse angle at the skull base, in association or not with a greater anterior length of the cranial base, can contribute to the development of Class II division 1 malocclusions. On the other hand, a more acute angle at the skull base can contribute to a more anterior positioning of the mandible and to the development of Class III malocclusions. PMID:29160345

Assessment of Soft Tissue Changes by Cephalometry and Two-Dimensional Photogrammetry in Bilateral Sagittal Split Ramus Osteotomy Cases

PubMed Central

Martin, Alice

2011-01-01

ABSTRACT Objectives We aimed to compare the standard methods of cephalometry and two-dimensional photogrammetry, to evaluate the reliability and accuracy of both methods. Material and Methods Twenty-six patients (mean age 25.5, standard deviation (SD) 5.2 years) with Class II relationship and 23 patients with Class III relationship (mean age 26.4, SD 4.7 years) who had undergone bilateral sagittal split ramus osteotomy were selected, with a median follow-up of 8 months between pre- and postsurgical evaluation. Pre- and postsurgical cephalograms and lateral photograms were traced and changes were recorded. Results Pre- and postsurgical measurements of hard tissue angles and distances revealed higher correlations with cephalometrically performed soft tissue measurements of facial convexity (Class II: N-PG, r = - 0.50, P = 0.047; Class III: ANB, r = 0.73, P = 0.005; NaPg , r = 0.71, P = 0.007;) and labiomental angle (Class II: SNB, r = 0.72, P = 0.002; ANB, r = - 0.72, P = 0.002; N-B, r = - 0.68, P = 0.004; ANS-Gn, r = 0.71, P = 0.002; Class III: ANS-Gn, r = 0.65, P = 0.043) compared with two-dimensional photogrammetry. However, two-dimensional photogrammetry revealed higher correlation between lower lip length and cephalometrically assessed angular hard tissue changes (Class II: SNB, r = 0.98, P = 0.007; N-B, r = 0.89, P = 0.037; N-Pg, r = 0.90, P = 0.033; Class III: SNB, r = - 0.54, P = 0.060; NAPg, r = - 0.65, P = 0.041; N-Pg, r = 0.58, P = 0.039). Conclusions Our findings suggest that cephalometry and two-dimensional photogrammetry offer the possibility to complement one another. PMID:24421994

Retrospective 25-year follow-up of treatment outcomes in Angle Class III patients : Success versus failure.

PubMed

Wendl, Brigitte; Kamenica, A; Droschl, H; Jakse, N; Weiland, F; Wendl, T; Wendl, M

2017-03-01

Despite recommendations for early treatment of hereditary Angle Class III syndrome, late pubertal growth may cause a relapse requiring surgical intervention. This study was performed to identify predictors of successful Class III treatment. Thirty-eight Class III patients treated with a chincup were retrospectively analyzed. Data were collected from the data archive, cephalograms, and casts, including pretreatment (T0) and posttreatment (T1) data, as well as long-term follow-up data collected approximately 25 years after treatment (T2). Each patient was assigned to a success or a failure group. Data were analyzed based on time (T0, T1, T2), deviations from normal (Class I), and prognathism types (true mandibular prognathism, maxillary retrognathism, combined pro- and retrognathism). Compared to Class I normal values, the data obtained in both groups yielded 11 significant parameters. The success group showed values closer to normal at all times (T0, T1, T2) and vertical parameters decreased from T0 to T2. The failure group showed higher values for vertical and horizontal mandibular growth, as well as dentally more protrusion of the lower anterior teeth and more negative overjet at all times. In adittion, total gonial and upper gonial angle were higher at T0 and T1. A prognostic score-yet to be evaluated in clinical practice-was developed from the results. The failure group showed greater amounts of horizontal development during the years between T1 and T2. Treatment of true mandibular prognathism achieved better outcomes in female patients. Cases of maxillary retrognathism were treated very successfully without gender difference. Failure was clearly more prevalent, again without gender difference, among the patients with combined mandibular prognathism and maxillary retrognathism. Crossbite situations were observed in 44% of cases at T0. Even though this finding had been resolved by T1, it relapsed in 16% of the cases by T2. The failure rate increased in cases of combined mandibular prognathism and maxillary retrognathism. Precisely in these combined Class III situations, it should be useful to apply the diagnostic and prognostic parameters identified in the present study and to provide the patients with specific information about the increased risk of failure.

Skeletal pattern in subjects with temporomandibular joint disorders

PubMed Central

Almăşan, Oana Cristina; Almăşan, Horea Artimoniu; Bran, Simion; Lascu, Liana; Iancu, Mihaela; Băciuţ, Grigore

2013-01-01

Introduction To establish the skeletal pattern in subjects with malocclusions and temporomandibular disorders (TMD); to assess the relationship between craniofacial skeletal structures and TMD in subjects with malocclusions. Material and methods Sixty-four subjects with malocclusions, over 18 years of age, were included in the study. Temporomandibular disorders were clinically assessed according to the Helkimo Anamnestic Index. Subjects underwent a lateral cephalogram. Subjects were grouped according to the sagittal skeletal pattern (ANB angle) into class I, II and III. Parametric Student tests with equal or unequal variations were used (variations were previously tested with Levene test). Results Twenty-four patients with TMD (experimental sample); 40 patients without TMD (control group); interincisal angle was higher in class I and II (p < 0.05) experimental subjects; overjet was larger in experimental subjects; midline shift and Wits appraisal were broader in the experimental group in all three classes. In class III subjects, the SNB angle was higher in the experimental group (p = 0.01). Joint noises followed by reduced mandible mobility, muscular pain and temporomandibular joint (TMJ) pain were the most frequent symptoms in subjects with TMD and malocclusions. Conclusions Temporomandibular joint status is an important factor to consider when planning orthodontic treatment in patients with severe malocclusions; midline shift, large overjet and deep overbite have been associated with signs and symptoms of TMD. PMID:23515361

Correlation between occlusion and cervical posture in patients with bruxism.

PubMed

Cesar, Guilherme Manna; Tosato, Juliana de Paiva; Biasotto-Gonzalez, Daniela Ap

2006-08-01

The goal of this study was to evaluate head and neck posture in the rest position of patients with bruxism and patients without temporomandibular disorder signs or symptoms to further relate them with Angle's class of malocclusion. Fifty-six volunteers participated in this study, ages 18 to 27 years with an average age of 22.5 years. They were divided into 2 groups: Group B--28 subjects with parafunctions (teeth grinding or clenching); and Group C--28 subjects without parafunctional habits (control group). All participants were photographed, and their pictures were analyzed and compared with the software Alcimagem (Instrumental Concept and Movement Analysis Laboratory, Uberlândia, Minas Gerais, Brazil). The results demonstrated that variation of angular values did not present statistical difference for the studied groups. Regarding Angle's class of malocclusion, class I was predominant in Group C, and classes II and III were predominant in Group B. The mental-sternal angle calculated did not present statistical significance between the groups; however, there was a greater variation between the smaller angle and the higher angle in Group B, contrary to Group C.

Diagnosis and conservative treatment of skeletal Class III malocclusion with anterior crossbite and asymmetric maxillary crowding.

PubMed

Tseng, Linda L Y; Chang, Chris H; Roberts, W Eugene

2016-04-01

A man, aged 28 years 9 months, came for an orthodontic consultation for a skeletal Class III malocclusion (ANB angle, -3°) with a modest asymmetric Class II and Class III molar relationship, complicated by an anterior crossbite, a deepbite, and 12 mm of asymmetric maxillary crowding. Despite the severity of the malocclusion (Discrepancy Index, 37), the patient desired noninvasive camouflage treatment. The 3-Ring diagnosis showed that treatment without extractions or orthognathic surgery was a viable approach. Arch length analysis indicated that differential interproximal enamel reduction could resolve the crowding and midline discrepancy, but a miniscrew in the infrazygomatic crest was needed to retract the right buccal segment. The patient accepted the complex, staged treatment plan with the understanding that it would require about 3.5 years. Fixed appliance treatment with passive self-ligating brackets, early light short elastics, bite turbos, interproximal enamel reduction, and infrazygomatic crest retraction opened the vertical dimension of the occlusion, improved the ANB angle by 2°, and achieved excellent alignment, as evidenced by a Cast Radiograph Evaluation score of 28 and a Pink and White dental esthetic score of 3. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

General anesthesia in orthognathic surgeries: does it affect horizontal jaw relations?

PubMed

Yaghmaei, Masoud; Ejlali, Masoud; Nikzad, Sekieneh; Sayyedi, Ashraf; Shafaeifard, Shahrouz; Pourdanesh, Fereydoun

2013-10-01

The aim of this study was to evaluate the influence of general anesthesia on centric jaw relation (CR) records of orthognathic surgical patients in different postural positions. Fifty patients undergoing orthognathic surgery at Taleghani Hospital (Tehran, Iran) in 2008 were prospectively studied. CR records were obtained in conscious patients in 2 different positions (upright and supine) 1 day before surgery and in the supine position under general anesthesia. The impressions were made and the corresponding casts were mounted on a semiadjustable articulator. Differences were measured to the nearest 0.10 mm using a caliper. Paired t test and a general linear regression model were used for statistical analysis. Fifty patients (27 women and 23 men; mean age, 22.5 ± 3.5 yr) were enrolled. Angle Class I (group I), Class II (group II), and Class III (group III) malocclusions were detected in 16% (n = 8), 54% (n = 27), and 30% (n = 15) of patients, respectively. Although mean changes were smaller than 2 mm, statistically significant differences were found by paired t test in all Angle classification groups. No significant differences were found between the supine and conscious and the supine and unconscious patient positions in groups I and III (P > .05). However, in group II, this difference was statistically significant (P = .001). Regarding the impact of anesthesia on CR records of patients with different Angle classes, this study showed a significant effect, particularly in group II. Assessment of the outcome of interest (difference between the supine and conscious and the upright and conscious positions) versus position after adjustment for Angle class using a general linear regression model showed that the difference was significant only for Angle class (β = +0.29; t = 3.05; P = .003). General anesthesia may not adversely affect the mandibular condylar position in orthognathic patients in a supine position compared with a supine and conscious position. However, among all study groups, group II showed more significant changes in CR records under general anesthesia. Oral and maxillofacial surgeons should be well aware of such changes in these particular positions and avoid possible mismanagement and potential complications. Copyright © 2013 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Evolution of Class III treatment in orthodontics.

PubMed

Ngan, Peter; Moon, Won

2015-07-01

Angle, Tweed, and Moyers classified Class III malocclusions into 3 types: pseudo, dentoalveolar, and skeletal. Clinicians have been trying to identify the best timing to intercept a Class III malocclusion that develops as early as the deciduous dentition. With microimplants as skeletal anchorage, orthopedic growth modification became more effective, and it also increased the scope of camouflage orthodontic treatment for patients who were not eligible for orthognathic surgery. However, orthodontic treatment combined with orthognathic surgery remains the only option for patients with a severe skeletal Class III malocclusion or a craniofacial anomaly. Distraction osteogenesis can now be performed intraorally at an earlier age. The surgery-first approach can minimize the length of time that the malocclusion needs to worsen before orthognathic surgery. Finally, the use of computed tomography scans for 3-dimensional diagnosis and treatment planning together with advances in imaging technology can improve the accuracy of surgical movements and the esthetic outcomes for these patients. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Treatment of skeletal Class III malocclusions: orthognathic surgery or orthodontic camouflage? How to decide.

PubMed

Benyahia, Hicham; Azaroual, Mohamed Faouzi; Garcia, Claude; Hamou, Edith; Abouqal, Redouane; Zaoui, Fatima

2011-06-01

The choice of treatment in adult skeletal Class III occlusions often poses a particularly tricky problem for the orthodontist. Faced with the option of either orthodontic camouflage or orthognathic surgery, the clinician's clinical experience is of paramount importance, especially in borderline cases. The aim of our study was to uncover a guide model enabling the practitioner to distinguish between skeletal Class III cases which can be suitably treated with orthodontics and those requiring orthognathic surgery. The lateral headfilms of 47 adult patients exhibiting skeletal Class III occlusions were analyzed. The orthodontic group comprised 22 patients and the surgical group 25. Twenty-seven linear, proportional and angular measurements were scrutinized. Stepwise discriminant analysis was used to identify the dentoskeletal and esthetic variables which most distinguished the two groups. The Holdaway angle was chosen to differentiate between patients prior to treatment. This model enables us to classify 87.2% of patients correctly. Copyright © 2011 CEO. Published by Elsevier Masson SAS. All rights reserved.

Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report

PubMed Central

Farret, Marcel Marchiori; Farret, Milton M. Benitez; Farret, Alessandro Marchiori

2016-01-01

ABSTRACT Introduction: Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. Objective: To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. Methods: The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. Results: After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results. PMID:27653269

Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report.

PubMed

Farret, Marcel Marchiori; Farret, Milton M Benitez; Farret, Alessandro Marchiori

2016-01-01

Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.

Camouflage treatment of skeletal Class III malocclusion with multiloop edgewise arch wire and modified Class III elastics by maxillary mini-implant anchorage.

PubMed

He, Shushu; Gao, Jinhui; Wamalwa, Peter; Wang, Yunji; Zou, Shujuan; Chen, Song

2013-07-01

To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.

Progressive changes in patients with skeletal Class III malocclusion treated by 2-jaw surgery with minimal and conventional presurgical orthodontics: A comparative study.

PubMed

Zhou, Yang; Li, Zili; Wang, Xiaoxia; Zou, Bingshuang; Zhou, Yanheng

2016-02-01

In this study, we aimed to compare treatment efficacy and postsurgical stability between minimal presurgical orthodontics and conventional presurgical orthodontics for patients with skeletal Class III malocclusion. Forty patients received minimal presurgical orthodontics (n = 20) or conventional presurgical orthodontics (n = 20). Lateral cephalograms were obtained before treatment, before orthognathic surgery, and at 1 week, 3 months, 6 months, and 12 months after surgery. Changes of overjet and mandibular incisal angle before surgery were greater in the conventional presurgical orthodontics group than in the minimal presurgical orthodontics group. Postsurgical horizontal changes in Points A and B, overjet, and mandibular incisal angle showed significant differences among the time points. Most of the horizontal and vertical relapses in the maxilla and the mandible occurred within the first 6 months in both groups. Minimal presurgical orthodontics and conventional presurgical orthodontics showed similar extents and directions of skeletal changes in patients with Class III malocclusion. However, orthodontists and surgeons should preoperatively consider the postsurgical counterclockwise rotation of the mandible when using minimal presurgical orthodontics. Close and frequent observations are recommended in the early postsurgical stages. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Orthodontic camouflage versus orthognathic surgery for class III deformity: comparative cephalometric analysis.

PubMed

Martinez, P; Bellot-Arcís, C; Llamas, J M; Cibrian, R; Gandia, J L; Paredes-Gallardo, V

2017-04-01

The objective of this study was to compare different cephalometric variables in adult patients with class III malocclusions before and after treatment, in order to determine which variables are indicative of orthodontic camouflage or orthognathic surgery. The cases of 156 adult patients were assessed: 77 treated with orthodontic camouflage and 79 treated with orthodontics and orthognathic surgery. The following cephalometric variables were measured on pre-treatment (T1) and post-treatment (T2) lateral cephalograms: sella-nasion-A-point (SNA), sella-nasion-B-point (SNB), and A-point-nasion-B-point (ANB) angles, Wits appraisal, facial axis angle, mandibular plane angle, upper and lower incisor inclination, and inter-incisal angle. There were statistically significant differences in cephalometric variables before and after treatment between the two groups. The percentage of normal pre-treatment measurements in the camouflage orthodontics group was 30.7%, which worsened slightly to 28.4% post-treatment. However in the group receiving surgery, this was 24.5% pre-treatment, improving to 33.5% after surgery. SNA, SNB, Wits appraisal, lower incisor inclination, and inter-incisal angle showed differences between the two groups before and after treatment. Wits appraisal, lower incisor inclination, and inter-incisal angle were indicative of one or other treatment. Upper and lower incisor decompensation in both groups did not reach ideal values, which impeded complete skeletal correction in 52% of surgical cases. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Occlusal Classification in Relation to Original Cleft Width in Patients With Unilateral Cleft Lip and Palate.

PubMed

Huang, Andrew H; Patel, Kamlesh B; Maschhoff, Clayton W; Huebener, Donald V; Skolnick, Gary B; Naidoo, Sybill D; Woo, Albert S

2015-09-01

To determine a correlation between the width of the cleft palate measured at the time of lip adhesion, definitive lip repair, and palatoplasty and the subsequent occlusal classification of patients born with unilateral cleft lip and palate. Retrospective, observational study. Referral, urban, children's hospital Participants : Dental models and records of 270 patients were analyzed. None. Angle occlusion classification. The mean age at which occlusal classification was determined was 11 ± 0.3 years. Of the children studies, 84 were diagnosed with Class I or II occlusion, 67 were diagnosed with Class III occlusion, and 119 were lost to follow up or transferred care. Mean cleft widths were significantly larger in subjects with Class III occlusion for all measures at time of lip adhesion and definitive lip repair (P < .02). At time of palatoplasty, cleft widths were significantly greater at the alveolus (P = .025) but not at the midportion of the hard palate (P = .35) or posterior hard palate (P = .10). Cleft widths from the lip through to the posterior hard palate are generally greater in children who are diagnosed with Class III occlusion later in life. Notably, the alveolar cleft width is significantly greater at each time point for patients who went on to develop Class III occlusion. There were no significant differences in cleft widths between patients diagnosed later with Class I and Class II occlusions.

Dentoskeletal Effects of the Modified Tandem Appliance vs the Facemask Appliance in the Treatment of Skeletal Class III Malocclusion: A Single-center, Randomized Controlled Trial.

PubMed

Husson, Amro H; Burhan, Ahmad S; Salma, Fadwa B; Nawaya, Fehmieh R

2016-07-01

The aim of this randomized controlled trial was to compare the skeletal and dentoalveolar effects of the modified tandem appliance (MTA) vs the facemask (FM) with rapid maxillary expansion. Thirty-two patients, aged 7 to 9 years were recruited. Eligibility criteria included skeletal class III malocclusion that resulted from the retrusion of the maxilla. Randomization was accomplished to divide the sample into two equal groups to be treated with either MTA or FM. Lateral cephalometric radiographs were obtained before treatment and after 2 mm positive overjet was achieved. Intragroup comparisons were performed using paired-sample t-test, and intergroup comparisons were performed using two-sample t-test at the p ≤ 0.05 level. Thirty-two patients (16 in each group) were available for statistical analysis. The pretreatment variables of both groups were similar. Both treatment therapies showed similar significant increase in the SNA and ANB angles, accompanied by slight decrease in the SNB angle. The increase in the SN:GoMe angle, Bjork's sum, and the overjet were significantly greater in the FM group. The forward movement of upper dentition was similar in both groups. Although the lower incisors retrusion was significantly greater in the FM group than in the MTA group, the uprighting of the lower molars was significantly greater in the MTA group. Both appliances showed similar effects apart from less clockwise rotation of the mandible, less retrusion of the lower incisors, and greater uprighting of the lower molars in the MTA group. Both the MTA and the FM groups are effective in treating class III malocclusion. The MTA group is more efficient in controlling the clockwise rotation and gaining some space in the lower arch.

Class III camouflage treatment: what are the limits?

PubMed

Burns, Nikia R; Musich, David R; Martin, Chris; Razmus, Thomas; Gunel, Erdogan; Ngan, Peter

2010-01-01

The purpose of this study was to determine the skeletal, dental, and soft-tissue changes in response to camouflage Class III treatment. Thirty patients (average age, 12.4 + or - 1.0 years) with skeletal Class III malocclusions who completed comprehensive nonextraction orthodontic treatment were studied. Skeletal, dental, and soft-tissue changes were determined by using published cephalometric analyses. The quality of orthodontic treatment was standardized by registering the peer assessment rating index on the pretreatment and posttreatment study models. The change in the level of gingival attachment with treatment was determined on the study casts. The results were compared with a group of untreated subjects. Data were analyzed with repeated measures analysis and paired t tests. The average change in the Wits appraisal was greater in the treated group (1.2 + or - 0.1 mm) than in the control group (-0.5 + or - 0.3 mm). The average peer assessment rating index score improved from 33.5 to 4.1. No significant differences were found for the level of gingival attachments between the treatment and control groups. The sagittal jaw relationship (ANB angle) did not improve with camouflage treatment. A wide range of tooth movements compensated for the skeletal changes in both groups. The upper and lower limits for incisal movement to compensate for Class III skeletal changes were 120 degrees to the sella-nasion line and 80 degrees to the mandibular plane, respectively. Greater increases in the angle of convexity were found in the treated group, indicating improved facial profiles. Greater increases in length of the upper lip were found in the treated group, corresponding to the changes in the hard tissues with treatment. Significant dental and soft-tissue changes can be expected in young Class III patients treated with camouflage orthodontic tooth movement. A wide range of skeletal dysplasias can be camouflaged with tooth movement without deleterious effects to the periodontium. However, proper diagnosis and realistic treatment objectives are necessary to prevent undesirable sequelae. Copyright 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Study on the difference of corresponding age at cervical vertebral maturation stages among different skeletal malocclusions].

PubMed

Zuo, Changyan; Cong, Chao; Wang, Shihui; Gu, Yan

2015-10-01

To compare the difference of corresponding age at cervical vertebral maturation (CVM) stages among different skeletal malocclusions and provide clinic guideline on optimal treatment timing for skeletal malocclusion. Based on ANB angle, 2 575 cephalograms collected from Department of Orthodontics, Peking University School and Hospital of Stomatology from May, 2006 to November, 2014 were classified into skeletal Class I (ANB 0°~5°, 1 317 subjects), Class II (ANB > 5°, 685 subjects) and Class III (ANB < 0°, 573 subjects) groups. CVM stages were evaluated with the modified version of CVM method. Independent sample t test was performed to analyze the difference of age at different CVM stages among various skeletal groups. Significant gender difference of age was found at CS3 to CS6 for skeletal Class I group (P < 0.05), at CS5 and CS6 for skeletal Class II group (P < 0.05), and at CS3 and CS5 for skeletal Class III group (P < 0.05). At CS3 stage, the average age of male in skeletal Class II and skeletal Class III groups was (11.6 ± 1.5) years old and (10.3 ± 1.9) years old, respectively; the average age of females in those two groups was (11.7 ± 1.3) years old and (9.3 ± 1.5) years old, respectively, and significant difference was found in both comparisons (P < 0.05). Compared average age at CS5 and CS6 between skeletal Class II and skeletal Class III groups [the ages of male was (15.1 ± 1.7) and (16.8 ± 1.6) years old, the ages of male was (14.6 ± 1.2) and (15.7 ± 2.5) years old], significant difference was also found (P < 0.05). Significant gender differences were found when evaluated CVM stage and age in skeletal Class I, II and III groups. Significant differences of age at different CVM stage was noted when skeletal Class II was compared with skeletal Class III groups.

Epidemiology of Malocclusion and Assessment of Orthodontic Treatment Need for Nepalese Children.

PubMed

Singh, Varun Pratap; Sharma, Amita

2014-01-01

Objective. To evaluate the prevalence of malocclusion and orthodontic treatment needs among 12- to 15-year-old schoolchildren in eastern Nepal and compare the findings with those of other populations. Methods. Two thousand seventy-four children (1149 males and 925 females) aged between 12 and 15 years were evaluated. Their orthodontic treatment need was assessed using the Index of Orthodontic Treatment Needs (IOTN) (dental health component (DHC)). Angle's classes of malocclusion were also evaluated. Results. The prevalence of classes I, II, and III was 48.50%, 32.68%, and 4.32%, respectively. The IOTN showed that 21.59% had an extreme treatment need, 24.67% had severe treatment need, 24.07% had moderate treatment need, 14.7% had mild treatment need, and 15.02% had no treatment need. Conclusion. Class I malocclusion is the most common, while class III is the least prevalent in eastern Nepal. The majority of the children need orthodontic treatment.

Class III malocclusion with complex problems of lateral open bite and severe crowding successfully treated with miniscrew anchorage and lingual orthodontic brackets.

PubMed

Yanagita, Takeshi; Kuroda, Shingo; Takano-Yamamoto, Teruko; Yamashiro, Takashi

2011-05-01

In this article, we report the successful use of miniscrews in a patient with an Angle Class III malocclusion, lateral open bite, midline deviation, and severe crowding. Simultaneously resolving such problems with conventional Class III treatment is difficult. In this case, the treatment procedure was even more challenging because the patient preferred to have lingual brackets on the maxillary teeth. As a result, miniscrews were used to facilitate significant asymmetric tooth movement in the posterior and downward directions; this contributed to the camouflage of the skeletal mandibular protrusion together with complete resolution of the severe crowding and lateral open bite. Analysis of the jaw motion showed that irregularities in chewing movement were also resolved, and a stable occlusion was achieved. Improvements in the facial profile and dental arches remained stable at the 18-month follow-up. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Transverse dental compensation in relation to sagittal and transverse skeletal discrepancies in skeletal Class III patients.

PubMed

Ahn, Jaechan; Kim, Sung-Jin; Lee, Ji-Yeon; Chung, Chooryung J; Kim, Kyung-Ho

2017-01-01

The purposes of this study were to compare the buccolingual inclinations of the posterior teeth in skeletal Class III patients with and without facial asymmetry with those of skeletal Class I patients and to investigate their relationships with sagittal and transverse skeletal discrepancies. Sixty-three skeletal Class III adult patients were divided into 2 groups according to the degree of menton deviation: a symmetry group with deviation less than 2 mm (n = 30), and an asymmetry group with deviation greater than 4 mm (n = 33). The control group comprised 25 skeletal Class I patients. The buccolingual inclinations of the posterior teeth measured on cone-beam computed tomography images were compared among the 3 groups, and regression analysis was performed to investigate the relationships between the inclinations and the sagittal and transverse skeletal discrepancies. The symmetry group showed greater buccal inclinations of the maxillary posterior teeth and lingual inclinations of the mandibular second molars than did the control, and this was correlated with the ANB angles. The deviated sides in the asymmetry group showed the greatest transverse dental compensation, which was correlated with menton deviation, whereas the nondeviated sides showed no significant transverse dental compensation. Transverse dental compensation is closely related to sagittal and transverse skeletal discrepancy in skeletal Class III patients. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Skeletal Class lll severe openbite treatment using implant anchorage.

PubMed

Sakai, Yuichi; Kuroda, Shingo; Murshid, Sakhr A; Takano-Yamamoto, Teruko

2008-01-01

A female patient with a skeletal Class III severe anterior openbite was treated using miniplates as the anchorage. The patient was 15 years and 10 months of age when she reported to our university hospital with a chief complaint of anterior openbite and reversed occlusion. The patient had an anterior openbite with an overjet of -3.0 mm and overbite of -5.0 mm and a Class III molar relationship. The cephalometric analysis showed a skeletal Class III relationship (ANB 0 degrees ). After the extraction of the bilateral mandibular third molars, miniplates were placed in the mandibular external oblique line. The mandibular dentition was retracted using elastic chain and miniplates. After treatment, an Angle Class I molar relationship was achieved and overjet and overbite had become 2.0 mm and 1.5 mm. A good facial appearance and occlusal relationship were obtained. The total active orthodontic treatment period was 23 months. Wrap-around type retainers were placed on both jaws and a lingual bonded retainer was also attached in the mandibular incisors. After 1 year of retention, the occlusion was stable, and a good facial profile was also retained. The mandibular deviation to the left was improved and the strain in the circumoral musculature during lip closure disappeared. An appropriate interincisal relationship was achieved by the uprighting of mandibular dentition without changing the vertical intermaxillary relationship. A panoramic radiograph showed no marked root resorption. Our results suggest that implant anchorage is useful for correction of skeletal Class III severe anterior openbite cases.

Cone-Beam Computed Tomography Assessment of Lower Facial Asymmetry in Unilateral Cleft Lip and Palate and Non-Cleft Patients with Class III Skeletal Relationship.

PubMed

Lin, Yifan; Chen, Gui; Fu, Zhen; Ma, Lian; Li, Weiran

2015-01-01

To evaluate, using cone-beam computed tomography (CBCT), both the condylar-fossa relationships and the mandibular and condylar asymmetries between unilateral cleft lip and palate (UCLP) patients and non-cleft patients with class III skeletal relationship, and to investigate the factors of asymmetry contributing to chin deviation. The UCLP and non-cleft groups consisted of 30 and 40 subjects, respectively, in mixed dentition with class III skeletal relationships. Condylar-fossa relationships and the dimensional and positional asymmetries of the condyles and mandibles were examined using CBCT. Intra-group differences were compared between two sides in both groups using a paired t-test. Furthermore, correlations between each measurement and chin deviation were assessed. It was observed that 90% of UCLP and 67.5% of non-cleft subjects had both condyles centered, and no significant asymmetry was found. The axial angle and the condylar center distances to the midsagittal plane were significantly greater on the cleft side than on the non-cleft side (P=0.001 and P=0.028, respectively) and were positively correlated with chin deviation in the UCLP group. Except for a larger gonial angle on the cleft side, the two groups presented with consistent asymmetries showing shorter mandibular bodies and total mandibular lengths on the cleft (deviated) side. The average chin deviation was 1.63 mm to the cleft side, and the average absolute chin deviation was significantly greater in the UCLP group than in the non-cleft group (P=0.037). Compared with non-cleft subjects with similar class III skeletal relationships, the subjects with UCLP showed more severe lower facial asymmetry. The subjects with UCLP presented with more asymmetrical positions and rotations of the condyles on axial slices, which were positively correlated with chin deviation.

Orthodontic Camouflage: A Treatment Option - A Clinical Case Report.

PubMed

Mazzini, William Ubilla; Torres, Fátima Mazzini

2017-01-01

Orthodontic camouflage provides an alternative treatment for angle III malocclusion since patients with limited economic resources cannot opt for orthognathic surgery, it being clear that correction will be achieved at the dental level and not at the bone complex. To determine an alternative treatment for patients who do not have the possibility of having orthognathic surgery. A 13-year-old female patient, dolico facial biotype with slightly concave profile, with Class III Skeletal by mandibular prognathism, anterior crossbite, anterior diastema, and large mandibular body, molar class, and canine III. Alexander technique brackets were placed; premolar extraction was not planned. Once the case was completed, the correction of the anterior crossbite was achieved, thanks to the use of the spaces that existed at the beginning of the treatment and also that a correct distalization of canines and retraction of the lower anterior segment were performed.

Orthodontic Camouflage: A Treatment Option – A Clinical Case Report

PubMed Central

Mazzini, William Ubilla; Torres, Fátima Mazzini

2017-01-01

Orthodontic camouflage provides an alternative treatment for angle III malocclusion since patients with limited economic resources cannot opt for orthognathic surgery, it being clear that correction will be achieved at the dental level and not at the bone complex. Objective: To determine an alternative treatment for patients who do not have the possibility of having orthognathic surgery. Clinical case: A 13-year-old female patient, dolico facial biotype with slightly concave profile, with Class III Skeletal by mandibular prognathism, anterior crossbite, anterior diastema, and large mandibular body, molar class, and canine III. Alexander technique brackets were placed; premolar extraction was not planned. Once the case was completed, the correction of the anterior crossbite was achieved, thanks to the use of the spaces that existed at the beginning of the treatment and also that a correct distalization of canines and retraction of the lower anterior segment were performed. PMID:29326524

Dentoalveolar class III treatment using retromolar miniscrew anchorage.

PubMed

Poletti, Laura; Silvera, Aimara A; Ghislanzoni, Luis T Huanca

2013-05-23

In this article, we report the successful use of miniscrews in the distalization of the lower dentition to correct an Angle class III malocclusion with lower anterior crowding in a dolichofacial adult patient. Conventional intraoral and extraoral appliances have many disadvantages, including the need for patient cooperation, potential for anchorage loss, and vertical extrusion of upper molars and lower incisors. Extrusion should be prevented or minimized when treating long-faced patients with reduced overbite. After third molar extractions, miniscrews were placed in the retromolar area. A sliding jig was applied to distalize the lower molars, while the anterior teeth were bonded and retracted secondarily to avoid round tripping. After 18 months of treatment, molar and canine class I relationship with normal overjet and overbite were achieved. In addition, there was an esthetic improvement in the profile with only a small increase of the lower anterior facial height. These results remained stable at a 12-month follow-up.

Occlusal features and need for orthodontic treatment in persons with osteogenesis imperfecta.

PubMed

Nguyen, Minh Son; Binh, Ho Duy; Nguyen, Khac Minh; Maasalu, Katre; Kõks, Sulev; Märtson, Aare; Saag, Mare; Jagomägi, Triin

2017-02-01

The aim of the study was to (a) analyse dental occlusion and determine the need for orthodontic treatment of persons with osteogenesis imperfecta (OI) in comparison with the healthy population and (b) investigate the associations between OI and malocclusion. A case-control study included 26 OI persons and 400 healthy participants (control group). Occlusal features and the need for orthodontic treatment were defined according to Dental Health Component-Index of Orthodontic Treatment Need and Dental Aesthetic Index. Results showed that Angle Class I, II, and III relationship was found in 23.1%, 3.8%, and 73.1% of OI group, and in the control group, it was 67%, 17.5%, and 15.5%, respectively. OI group had significantly higher prevalence of reverse overjet >1 mm (76.9%), missing teeth (42.3%), posterior crossbite (34.6%), and open bite >2 mm (19.2%) compared to the control group (8.5%, 2.2%, 6.2%, and 3.5%, respectively). OI group had less incisal segment crowding and more incisal segment spacing than the control group ( p  < 0.05). The need for orthodontic treatment of OI group according to Dental Health Component-Index of Orthodontic Treatment Need and Dental Aesthetic Index was 88.5% and 61.5%, respectively, while in the control group, it was 24.8% and 51.8%. The malocclusion in OI persons was associated with reverse overjet > 1 mm (OR = 13.3, 95% CI = 3.9-44.7, p  < .001), Angle Class III malocclusion (OR = 8.0, 95% CI = 2.0-30.8, p  = .003), and missing teeth (OR = 4.7, 95% CI = 1.0-22.4, p  = .049). In conclusion, there is the high probability of malocclusion in OI persons. Persons with OI require early orthodontic treatment because of significant correlation of OI disease with Angle Class III malocclusion, reverse overjet, and missing teeth.

Orthognathic Surgery and Rhinoplasty to Address Nasomaxillary Hypoplasia.

PubMed

Veeramani, Anamika; Sawh, Raj; Steinbacher, Derek M

2017-11-01

The treatment of nasomaxillary hypoplasia is challenging. The phenotype of Binder "syndrome" includes the following: midfacial hypoplasia, class III malocclusion, small or absent anterior nasal spine, flattened nose, horizontal nostrils, short columella, acute nasolabial angle, and a flat frontonasal angle. A staged approach is used, with orthognathic surgery to achieve vertical maxillary length and sagittal advancement, followed by rhinoplasty aimed to increase nasal tip projection, rotation, and columellar length. This article details the diagnosis and treatment of nasomaxillary hypoplasia, demonstrating the senior author's (D.M.S.) preferred approach and technical steps. Therapeutic, V.

Correlation Between Cephalometric Measures and End-of-Treatment Facial Attractiveness.

PubMed

Yu, Xiao-nan; Bai, Ding; Feng, Xue; Liu, Yue-hua; Chen, Wen-jing; Li, Song; Han, Guang-li; Jiang, Ruo-ping; Xu, Tian-min

2016-03-01

Sixty-nine experienced Chinese orthodontists evaluated 108 Chinese patients' facial attractiveness from set of photographs (frontal, lateral, and frontal smiling photos) taken at the end of orthodontic treatment. These 108 patients, which contained an equal number of patients with Class I, II, and III malocclusion, were randomly selected from 6 orthodontic treatment centers throughout China. Spearman rank-order correlation coefficients (rs) analyses were performed to examine agreement in ranking between all judge pairs. Pearson correlation and multivariate regression were performed to examine the correlation between cephalometric measures and end-of-treatment Photo Attractiveness Rank.96.68% judge pairs showed moderate correlated (+0.4 ≤ rs < +0.7) subjective rankings. Cephalometric measures significantly correlated with end-of-treatment Photo Attractiveness Rank included interincisal angle (r = 0.330, P < 0.05), L1/MP° (r = 0.386, P < 0.05), L1-NBmm (r = 0.451, P < 0.01), L1/NB° (r = 0.374, P < 0.05), and profile angle (r = 0.353, P < 0.05) in Class I patients with an explained variance of 32.8%, and ANB angle (r = 0.432, P < 0.01), angle of convexity (r = 0.448, P < 0.01), profile angle (r = 0.488, P < 0.01), Li to E-line (r = 0.374, P < 0.05), Li to B-line (r = 0.543, P < 0.01), and Z angle (r = 0.543, P < 0.01) in Class II patient with an explained variance of 43.3%.There was less association than expected between objective measurements on the lateral cephalograms and clinicians' rankings of facial attractiveness on clinical photography in Chinese patients. Straight-stand lower incisor was desired for facial attractiveness of Class I malocclusion; and sagittal relationship and lip prominence influence the esthetics of Class II malocclusion in Chinese population.

Evaluation of arch form between Vietnamese and North American Caucasians using 3-dimensional virtual models.

PubMed

Trang, Vu Thi Thu; Park, Jae Hyun; Bayome, Mohamed; Shastry, Shruti; Mellion, Alex; Kook, Yoon-Ah

2015-01-01

The purpose of this study was to investigate the three-dimensional (3D) morphologic differences in the mandibular arch of Vietnamese and North American White subjects. The sample included 113 Vietnamese subjects (41 Class I, 37 Class II and 35 Class III) and 96 White subjects (29 Class I, 30 Class II and 37 Class III). The samples were regrouped according to arch form types (tapered, ovoid, and square) to compare the frequency distribution of the three arch forms between ethnic groups in each angle classification. The facial axis point of each tooth was digitized on 3D virtual models. Four linear and two ratio variables were measured. In comparing arch dimensions, the intercanine and intermolar widths were wider in Vietnamese than in Whites (p < 0.001, p = 0.042, respectively). In the White group, there was even frequency distribution of the three arch forms. However, in the Vietnamese group, the square arch form was the most frequent followed by tapered and ovoid arch forms. The arch forms of Whites were narrower than Vietnamese. In North American Whites, the distribution of the arch form types showed similar frequency. In Vietnamese, the square arch form was more frequent.

Evaluation of cervical posture of children in skeletal class I, II, and III.

PubMed

D'Attilio, Michele; Caputi, Sergio; Epifania, Ettore; Festa, Felice; Tecco, Simona

2005-07-01

Previous studies on the relationship between morphological structure of the face and cervical posture have predominantly focused on vertical dimensions of the face. The aim of this study was to investigate whether there are significant differences in cervical posture in subjects with a different sagittal morphology of the face, i.e., a different skeletal class. One hundred twenty (120) children (60 males and 60 females, average age 9.5 yrs., SD+/-0.5) were admitted for orthodontic treatment. Selection criteria was: European ethnic origin, date of birth, considerable skeletal growth potential remaining and an absence of temporomandibular joint dysfunction (TMD). Lateral skull radiographs were taken in mirror position. Subjects were divided into three groups based on their skeletal class. The cephalometric tracings included postural variables. The most interesting findings were: 1. children in skeletal class III showed a significantly lower cervical lordosis angle (p<0.001) than the children in skeletal class I and skeletal class II; 2. children in skeletal class II showed a significantly higher extension of the head upon the spinal column compared to children in skeletal class I and skeletal class III (p<0.001 and p<0.01, respectively). This is probably because the lower part of their spinal column was straighter than those of subjects in skeletal class I and II (p<0.01 and p<0.001, respectively). Significant differences among the three groups were also observed in the inclination of maxillary and mandibular bases to the spinal column. The posture of the neck seems to be strongly associated with the sagittal as well as the vertical structure of the face.

What Controls the Magnetic Exchange and Anisotropy in a Family of Tetranuclear {Mn2IIMn2III} Single-Molecule Magnets?

PubMed

Vignesh, Kuduva R; Langley, Stuart K; Gartshore, Christopher J; Moubaraki, Boujemaa; Murray, Keith S; Rajaraman, Gopalan

2017-02-20

Twelve heterovalent, tetranuclear manganese(II/III) planar diamond or "butterfly" complexes, 1-12, have been synthesized and structurally characterized, and their magnetic properties have been probed using experimental and theoretical techniques. The 12 structures are divided into two distinct "classes". Compounds 1-8 place the Mn(III), S = 2, ions in the body positions of the butterfly metallic core, while the Mn(II), S = 5/2, ions occupy the outer wing sites and are described as "Class 1". Compounds 9-12 display the reverse arrangement of ions and are described as "Class 2". Direct current susceptibility measurements for 1-12 reveal ground spin states ranging from S = 1 to S = 9, with each complex displaying unique magnetic exchange parameters (J). Alternating current susceptibility measurements found that that slow magnetic relaxation is observed for all complexes, except for 10 and 12, and display differing anisotropy barriers to magnetization reversal. First, we determined the magnitude of the magnetic exchange parameters for all complexes. Three exchange coupling constants (J bb , J wb , and J ww ) were determined by DFT methods which are found to be in good agreement with the experimental fits. It was found that the orientation of the Jahn-Teller axes and the Mn-Mn distances play a pivotal role in determining the sign and strength of the J bb parameter. Extensive magneto-structural correlations have been developed for the two classes of {Mn II 2 Mn III 2 } butterfly complexes by varying the Mn b -O distance, Mn w -O distance, Mn b -O-Mn b angle (α), Mn b -O-Mn b -O dihedral angle (γ), and out-of-plane shift of the Mn w atoms (β). For the magnetic anisotropy the DFT calculations yielded larger negative D value for complexes 2, 3, 4, and 6 compared to the other complexes. This is found to be correlated to the electron-donating/withdrawing substituents attached to the ligand moiety and suggests a possible way to fine tune the magnetic anisotropy in polynuclear Mn ion complexes.

Videofluoroscopy of the oral phase of swallowing in eight to twelve years old children with dental malocclusion.

PubMed

Junqueira, Patricia; Costa, Milton Melciades

2013-11-01

The objective of this study was to describe the oral phase of swallowing in individuals with dental malocclusion and to generate data that would contribute to the rehabilitation of those patients. The study was based on the evaluation of the swallowing system through videofluoroscopy on thirty-four children of both genders, aged eight to twelve years old who present with Angle Class II and III dental malocclusions. Thirteen children of similar age and gender presenting normal dental occlusion formed the control group. The results indicated that the oral phase of swallowing is different between individuals with normal occlusion and malocclusion. Dental occlusion types Angle Class II and III did not present a swallowing pattern, independently of the amount of liquid ingested. The swallowing appeared effective in the oral phase of individuals with dental malocclusion, even though adaptations were identified. The outcome, in the absence of a single pattern and the efficiency of the adapted swallowing demonstrates, first a need for additional research investigating orofacial myofunctional treatment for patients with malocclusion and second how such analyses should focus on contributing positively to the rehabilitation of these patients.

Compensation trends of the angulation of first molars: retrospective study of 1403 malocclusion cases.

PubMed

Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

2014-09-01

We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged <12 years and least distally in cases aged >16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability.

Surgery-first approach using a three-dimensional virtual setup and surgical simulation for skeletal Class III correction

PubMed Central

Im, Joon; Kang, Sang Hoon; Lee, Ji Yeon; Kim, Moon Key

2014-01-01

A 19-year-old woman presented to our dental clinic with anterior crossbite and mandibular prognathism. She had a concave profile, long face, and Angle Class III molar relationship. She showed disharmony in the crowding of the maxillomandibular dentition and midline deviation. The diagnosis and treatment plan were established by a three-dimensional (3D) virtual setup and 3D surgical simulation, and a surgical wafer was produced using the stereolithography technique. No presurgical orthodontic treatment was performed. Using the surgery-first approach, Le Fort I maxillary osteotomy and mandibular bilateral intraoral vertical ramus osteotomy setback were carried out. Treatment was completed with postorthodontic treatment. Thus, symmetrical and balanced facial soft tissue and facial form as well as stabilized and well-balanced occlusion were achieved. PMID:25473649

Professionals' and laypersons' appreciation of various options for Class III surgical correction.

PubMed

Fabré, M; Mossaz, C; Christou, P; Kiliaridis, S

2010-08-01

The objectives of this study were to evaluate the assessments of maxillofacial surgeons, orthodontists, and laypersons on the predicted aesthetic outcome of various surgical options in Class III correction and the associations between certain initial cephalometric values and the judges' preferred option. Pre-surgical lateral headfilms and coloured profile photographs of 18 skeletal Class III Caucasian adult patients (10 males and 8 females) with a mean age of 24.5 years were used. The headfilms were hand traced and digitized. Conventional cephalometric analysis was performed. Computerized predictions of three surgical options, mandibular setback, Le Fort I advancement, and bimaxillary surgery, were made. For each case, the pre-surgical profile photograph with the three predictions was presented on a printed page. The questionnaire was sent to 51 maxillofacial surgeons (response rate 45.1 per cent), 78 orthodontists (response rate 71.8 per cent), and 61 laypersons (response rate 100 per cent) to aesthetically evaluate the pre-surgical photographs and the surgical predictions by placing a mark along a 10-graded visual analogue scale (VAS) using a standard profile for calibration. Confidence interval was calculated for each patient. An independent samples t-test was used to detect initial cephalometric values associated with the judges' preferred option and analysis of variance/Tukey's honestly significant differences to evaluate differences between judges. Intra-observer reliability was assessed with a paired t-test. All treatment predictions led to improved scoring of facial aesthetics with the exception of the setback option for three patients. For 14 patients, general agreement for the preferred option existed between the three groups of judges. Laypersons tended to give lower improvement scores than professionals. Overjet, nasofacial, and nasomental angles were important in decision making between the mandibular setback and Le Fort I options (the more negative the overjet, the larger the nasofacial angle, the smaller the nasomental angle, the greater the preference for the Le Fort I option). Wits appraisal seemed to be important in decision making between the mandibular setback and bimaxillary options (the more negative the Wits appraisal, the greater the preference for the latter option).

Occlusal features and need for orthodontic treatment in persons with osteogenesis imperfecta

PubMed Central

Binh, Ho Duy; Nguyen, Khac Minh; Maasalu, Katre; Kõks, Sulev; Märtson, Aare; Saag, Mare; Jagomägi, Triin

2017-01-01

Abstract The aim of the study was to (a) analyse dental occlusion and determine the need for orthodontic treatment of persons with osteogenesis imperfecta (OI) in comparison with the healthy population and (b) investigate the associations between OI and malocclusion. A case‐control study included 26 OI persons and 400 healthy participants (control group). Occlusal features and the need for orthodontic treatment were defined according to Dental Health Component‐Index of Orthodontic Treatment Need and Dental Aesthetic Index. Results showed that Angle Class I, II, and III relationship was found in 23.1%, 3.8%, and 73.1% of OI group, and in the control group, it was 67%, 17.5%, and 15.5%, respectively. OI group had significantly higher prevalence of reverse overjet >1 mm (76.9%), missing teeth (42.3%), posterior crossbite (34.6%), and open bite >2 mm (19.2%) compared to the control group (8.5%, 2.2%, 6.2%, and 3.5%, respectively). OI group had less incisal segment crowding and more incisal segment spacing than the control group (p < 0.05). The need for orthodontic treatment of OI group according to Dental Health Component‐Index of Orthodontic Treatment Need and Dental Aesthetic Index was 88.5% and 61.5%, respectively, while in the control group, it was 24.8% and 51.8%. The malocclusion in OI persons was associated with reverse overjet > 1 mm (OR = 13.3, 95% CI = 3.9–44.7, p < .001), Angle Class III malocclusion (OR = 8.0, 95% CI = 2.0–30.8, p = .003), and missing teeth (OR = 4.7, 95% CI = 1.0–22.4, p = .049). In conclusion, there is the high probability of malocclusion in OI persons. Persons with OI require early orthodontic treatment because of significant correlation of OI disease with Angle Class III malocclusion, reverse overjet, and missing teeth. PMID:29744175

Three dimensional reliability analyses of currently used methods for assessment of sagittal jaw discrepancy

PubMed Central

Almaqrami, Bushra-Sufyan; Alhammadi, Maged-Sultan

2018-01-01

Background The objective of this study was to analyse three dimensionally the reliability and correlation of angular and linear measurements in assessment of anteroposterior skeletal discrepancy. Material and Methods In this retrospective cross sectional study, a sample of 213 subjects were three-dimensionally analysed from cone-beam computed tomography scans. The sample was divided according to three dimensional measurement of anteroposterior relation (ANB angle) into three groups (skeletal Class I, Class II and Class III). The anterior-posterior cephalometric indicators were measured on volumetric images using Anatomage software (InVivo5.2). These measurements included three angular and seven linear measurements. Cross tabulations were performed to correlate the ANB angle with each method. Intra-class Correlation Coefficient (ICC) test was applied for the difference between the two reliability measurements. P value of < 0.05 was considered significant. Results There was a statistically significant (P<0.05) agreement between all methods used with variability in assessment of different anteroposterior relations. The highest correlation was between ANB and DSOJ (0.913), strong correlation with AB/FH, AB/SN/, MM bisector, AB/PP, Wits appraisal (0.896, 0.890, 0.878, 0.867,and 0.858, respectively), moderate with AD/SN and Beta angle (0.787 and 0.760), and weak correlation with corrected ANB angle (0.550). Conclusions Conjunctive usage of ANB angle with DSOJ, AB/FH, AB/SN/, MM bisector, AB/PP and Wits appraisal in 3D cephalometric analysis provide a more reliable and valid indicator of the skeletal anteroposterior relationship. Clinical relevance: Most of orthodontic literature depends on single method (ANB) with its drawbacks in assessment of skeletal discrepancy which is a cardinal factors for proper treatment planning, this study assessed three dimensionally the degree of correlation between all available methods to make clinical judgement more accurate based on more than one method of assessment. Key words:Anteroposterior relationships, ANB angle, Three-dimension, CBCT. PMID:29750096

Relationship between formation/eruption of maxillary teeth and skeletal pattern of maxilla.

PubMed

Suda, Naoto; Hiyama, Shigetoshi; Kuroda, Takayuki

2002-01-01

Previous reports have indicated that formation and eruption of the maxillary teeth, especially the molars, are delayed in skeletal Class III patients compared with Class I and Class II patients. However, the relationship between the formation/eruption of maxillary teeth and the skeletal pattern of the maxilla is not yet clear. To examine this relationship, we studied 81 skeletal Class III Japanese patients (mean age, 8.8 years). The sample was divided into 2 groups: a maxillary retrusion (MR) group, characterized by a small SNA angle and a short palatal length, and a control group in which those values were in the normal range for patients of Japanese descent. There was no significant difference in the rate of formation for the maxillary and mandibular teeth between the 2 groups. The eruption of the maxillary second molars was delayed in the MR group compared with the control group. There were no significant differences between the 2 groups for any other teeth. A multiple-regression analysis was carried out to examine whether the skeletal pattern of the maxilla is a useful indicator for predicting the eruption of the maxillary teeth. The results showed that palatal length and chronologic age were significant independent (explanatory) variables for predicting eruption of the maxillary second molars. These findings indicated that the skeletal pattern of the maxilla is a useful indicator for predicting the timing of maxillary molar eruption when considering treatment of skeletal Class III malocclusions.

Maxillary Distraction Osteogenesis in Unilateral Cleft Lip and Palate Patients with Rigid External Distraction System.

PubMed

Alkhouri, Shadi; Waite, Peter D; Davis, Matthew B; Lamani, Ejvis; Kau, Chung How

2017-01-01

Distraction osteogenesis (DO) is a treatment option for patients with maxillary hypoplasia secondary to cleft lip and palate (CLP). The aim of this study is to present a technique for maxillary DO using Le Fort I osteotomy with rigid external distraction (RED) system. The patient presented in this paper was an Asian female with CLP aged 13 years and 6 months. She presented with severe midfacial deficiency with a Class III dental malocclusion with a negative overjet and concave facial profile. Cone-beam computed tomography images were recorded preoperatively and the operation performed involved a high Le Fort I osteotomy. The appliance fabricated was banded to upper first molars used for anchorage of the RED system. Distraction of the maxilla was initiated after 7-day latency period. Postoperative cephalometric analysis showed maxillary advancement anteriorly and superiorly, the total distraction treatment period was 10 days. The maxillary advancement was 10.5 mm and the SNA angle increased from 67.5° to 77.9°. Furthermore, the ANB angle changed from -9.8° to 1.6° and the occlusion changed from Class III to Class I. The profile of the face changed from concave to convex and a much better esthetic result was achieved. The study suggests RED system to be a reliable alternative procedure for the treatment of midfacial hypoplasia with or without cleft. Furthermore, it minimizes the risk of the surgical procedure and shortens the operating time.

Maxillary Advancement for Unilateral Crossbite in a Patient with Sleep Apnea Syndrome.

PubMed

Hoshijima, Mitsuhiro; Honjo, Tadashi; Moritani, Norifumi; Iida, Seiji; Yamashiro, Takashi; Kamioka, Hiroshi

2015-01-01

This article reports the case of a 44-year-old male with skeletal Class III, Angle Class III malocclusion and unilateral crossbite with concerns about obstructive sleep apnea syndrome (OSAS), esthetics and functional problems. To correct the skeletal deformities, the maxilla was anteriorly repositioned by employing LeFort I osteotomy following pre-surgical orthodontic treatment, because a mandibular setback might induce disordered breathing and cause OSAS. After active treatment for 13 months, satisfactory occlusion was achieved and an acceptable facial and oral profile was obtained. In addition, the apnea hypopnea index (AHI) decreased from 18.8 preoperatively to 10.6 postoperatively. Furthermore, after a follow-up period of 7 months, the AHI again significantly decreased from 10.6 to 6.2. In conclusion, surgical advancement of the maxilla using LeFort I osteotomy has proven to be useful in patients with this kind of skeletal malocclusion, while preventing a worsening of the OSAS.

Compensation trends of the angulation of first molars: retrospective study of 1 403 malocclusion cases

PubMed Central

Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

2014-01-01

We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1 403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged <12 years and least distally in cases aged >16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability. PMID:24699185

Frontal Changes in the Lower Face After Clockwise Rotation of the Maxillomandibular Complex Without Perisurgical Orthodontic Treatment in Angle Class I and Skeletal Class III Women.

PubMed

Lee, Sang Woo; Cho, Jeongmok; Kim, Kikap; Ahn, Seung Hyun

2017-06-01

Orthognathic surgery has become more popular to slenderize a wide lower face and to improve facial esthetics in Asian patients with normal occlusion. Clockwise rotation (CR) of the maxillomandibular complex (MMC) steepens the mandibular plane. This study performed a quantitative analysis on the influence of CR on slenderness of the lower face from the frontal view. This retrospective study included 36 female patients with Angle Class I occlusion and skeletal Class III pattern. The subjects underwent CR of the MMC without perioperative orthodontic treatment and change in the occlusion only for the purpose of esthetic improvement. Linear and angular variables were measured on a cephalogram and three-dimensional computed tomography (3D CT) obtained before and at least 6 months after surgery. Data were analyzed using paired t tests and Spearman correlations. Univariate regression analysis was used to predict the postoperative change according to the amount of posterior impaction. The mean posterior impaction was 3.81 mm. All mandibular plane angle (MPA) measurements were increased (ranged from 5.69° to 13.12°, p < 0.001), exhibiting a significant correlation with the amount of posterior impaction. Bigonial width measurements were decreased after surgery (ranged from 4.97 to 5.51 mm, p < 0.001). Among the MPAs derived from the 3D CT, the coronal projection from the frontal view exhibited a discrepancy between right and left side. The changes in linear and angular measurements in this study indicate that the lower face becomes narrower and more slender as the MMC rotates in a clockwise direction. Orthognathic surgery with CR has the advantage of increasing the MPAs and obtaining natural soft tissue contouring while minimizing the amount of bone resection. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266c .

[Cephalometric analysis in cases with Class III malocclusions].

PubMed

Rak, D

1989-01-01

Various orthodontic class III anomalies, classified into several experimental groups, and eugnathic occlusions serving as controls were studied by roentgencephalometry. The objective of the study was to detect possible distinctions in the quantitative values of two variables chosen and to select the variables which most significantly discriminate the group of class III orthodontic anomalies. Attempts were made to ascertain whether or not there were sex-related differences. The teleroentgenograms of 269 examines, aged 10-18 years, of both sexes were analyzed. The experimental group consisted of 89 examinees class III orthodontic anomalies. The control group consisted of 180 examines with eugnathic occlusion. Latero-lateral skull roentgenograms were taken observing the rules of roentgenocephalometry. Using acetate paper, the drawings of profile teleroentgenograms were elaborated and the reference points and lines were entered. A total of 38 variables were analyzed, of which there were 10 linear, 19 angular, and 8 variables were obtained by mathematical calculation; the age variable was also analyzed. In statistical analyses an electronic computer was used. The results are presented in tables and graphs. The results obtained showed that: --compared to the findings in the control group, the subjects in the experimental group displayed significant changes in the following craniofacial characteristics a negative difference in the position of the apical base of the jaw, manifest concavity of the osseous profile and diminished convexity of the profile of soft parts, retroinclination of the lower incisors, mandibular prognathism, increased mandibular angle and increased mandibular proportion compared to maxillary and the anterior cranial base; --with regard to the sex of the examinees, only four linear variables of significantly discriminating character were selected, so that in can be concluded that there were no significant sex differences among the morphological characteristics of the viscerocranium.

Augmented corticotomy-assisted surgical orthodontics decompensates lower incisors in Class III malocclusion patients.

PubMed

Wang, Bo; Shen, Guofang; Fang, Bing; Yu, Hongbo; Wu, Yong; Sun, Liangyan

2014-03-01

To quantitatively evaluate lower incisor decompensation and the surrounding periodontal region after augmented corticotomy-assisted surgical orthodontics in patients with Class III malocclusion. This prospective study enrolled patients with severe Class III malocclusion who underwent augmented corticotomy in the lower anterior region before orthodontic surgery. Cone-beam computed tomograms and lateral cephalograms were obtained before treatment (T0), after presurgical orthodontic treatment (T1), and at removal of the orthodontic surgical appliances (T2). Repeated measures analysis of variance was used to compare variables at each time point: root length (RL), anterior vertical alveolar bone level at the labial side (AVBL), posterior vertical alveolar bone level at the lingual side (PVBL), labial alveolar bone thickness at the apex (LA), lingual alveolar bone thickness at the apex (LP), and angle of the incisor to the mandibular plane (L1-MP). In the 8 subjects studied, RL was maintained from T0 to T2 (P > .05), whereas AVBL and PVBL increased from T0 to T1 (P < .05) and then decreased from T1 to T2 (P < .05). LA and L1-MP increased from T0 to T1 (P < .001) but remained steady from T1 to T2 (P > .05). LP decreased from T0 to T1 (P < .05) but increased from T1 to T2 (P < .05) with no further change. Augmented corticotomy-assisted surgical orthodontics can achieve adequate tooth decompensation with minimal periodontal side-effects in the lower anterior region in patients with Class III malocclusion. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Maxillary Distraction Osteogenesis in Unilateral Cleft Lip and Palate Patients with Rigid External Distraction System

PubMed Central

Alkhouri, Shadi; Waite, Peter D.; Davis, Matthew B.; Lamani, Ejvis; Kau, Chung How

2017-01-01

Aim: Distraction osteogenesis (DO) is a treatment option for patients with maxillary hypoplasia secondary to cleft lip and palate (CLP). Purpose: The aim of this study is to present a technique for maxillary DO using Le Fort I osteotomy with rigid external distraction (RED) system. Subjects and Methods: The patient presented in this paper was an Asian female with CLP aged 13 years and 6 months. She presented with severe midfacial deficiency with a Class III dental malocclusion with a negative overjet and concave facial profile. Cone-beam computed tomography images were recorded preoperatively and the operation performed involved a high Le Fort I osteotomy. The appliance fabricated was banded to upper first molars used for anchorage of the RED system. Distraction of the maxilla was initiated after 7-day latency period. Results: Postoperative cephalometric analysis showed maxillary advancement anteriorly and superiorly, the total distraction treatment period was 10 days. The maxillary advancement was 10.5 mm and the SNA angle increased from 67.5° to 77.9°. Furthermore, the ANB angle changed from −9.8° to 1.6° and the occlusion changed from Class III to Class I. The profile of the face changed from concave to convex and a much better esthetic result was achieved. Conclusion: The study suggests RED system to be a reliable alternative procedure for the treatment of midfacial hypoplasia with or without cleft. Furthermore, it minimizes the risk of the surgical procedure and shortens the operating time. PMID:28713737

Comparison of arch forms between Egyptian and North American white populations.

PubMed

Bayome, Mohamed; Sameshima, Glenn T; Kim, Yoonji; Nojima, Kunihiko; Baek, Seung-Hak; Kook, Yoon-Ah

2011-03-01

The aim of this study was to evaluate the morphologic differences in the mandibular arches of Egyptian and North American white subjects. The sample included 94 Egyptian subjects (35 Class I, 32 Class II, and 27 Class III) and 92 white subjects (37 Class I, 29 Class II, and 26 Class III). The subjects were grouped according to arch form types (tapered, ovoid, and square) to compare their frequency distribution between ethnic groups in each Angle classification. The most facial portions of 13 proximal contact areas were digitized on scanned images of mandibular casts to estimate the corresponding clinical bracket point for each tooth. Four linear and 2 proportional measurements were taken. In comparing arch dimensions, intermolar width was narrower in Egyptians than in the whites (P = 0.001). There was an even frequency distribution of the 3 arch forms in the Egyptian group. On the other hand, the most frequent arch form was ovoid followed by tapered and square in the white group; the square arch form was significantly less frequent than the tapered and ovoid arch forms (P = 0.029). The arch forms of Egyptians are narrower than those of whites. The distribution of the arch form types in Egyptians showed similar frequency, but the square arch form was less frequent in whites. It is recommended to select narrower archwires from the available variations to suit many Egyptian patients. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Alveolar bone thickness and lower incisor position in skeletal Class I and Class II malocclusions assessed with cone-beam computed tomography

PubMed Central

Ucar, Faruk Izzet; Buyuk, Suleyman Kutalmis; Ozer, Torun; Uysal, Tancan

2013-01-01

Objective To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. Methods CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal-Wallis, and Dunn post-hoc tests were performed for statistical comparisons. Results Labial alveolar bone thickness was significantly higher in Class I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). Conclusions Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients. PMID:23814708

Alveolar bone thickness and lower incisor position in skeletal Class I and Class II malocclusions assessed with cone-beam computed tomography.

PubMed

Baysal, Asli; Ucar, Faruk Izzet; Buyuk, Suleyman Kutalmis; Ozer, Torun; Uysal, Tancan

2013-06-01

To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal-Wallis, and Dunn post-hoc tests were performed for statistical comparisons. Labial alveolar bone thickness was significantly higher in Class I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients.

Quantitative validation of a computer-aided maxillofacial planning system, focusing on soft tissue deformations.

PubMed

Nadjmi, Nasser; Defrancq, Ellen; Mollemans, Wouter; Hemelen, Geert Van; Bergé, Stefaan

2014-01-01

The aim of this study was to evaluate the accuracy of 3D soft tissue predictions generated by a computer-aided maxillofacial planning system in patients undergoing orthognathic surgery. Twenty patients with dentofacial dysmorphosis were treated with orthognathic surgery after a preoperative orthodontic treatment. Fourteen patients had an Angle Class II malocclusion; three patients had an Angle class III malocclusion, and three patients had an Angle Class I malocclusion. Skeletal asymmetry was observed in six patient. The surgeries were planned using the Maxilim software. Computer assisted surgical planning was transferred to the patient by digitally generated splints. The validation procedures were performed in the following steps: (1) Standardized registration of the pre- and postoperative Cone Beam CT volumes; (2) Automated adjustment of the bone-related planning to the actual operative bony displacement; (3) Simulation of soft tissue changes; (4) Calculation of the soft tissue differences between the predicted and the postoperative results by distance mapping. Eighty four percent of the mapped distances between the predicted and actual postoperative results measured between -2 mm and +2 mm. The mean absolute linear measurements between the predicted and actual postoperative surface was 1.18. Our study shows the overall prediction was dependent on neither the surgical procedures nor the dentofacial deformity type. Despite some shortcomings in the prediction of the final position of the lower lip and cheek area, this software promises a clinically acceptable soft tissue prediction for orthognathic surgical procedures.

Dentofacial effects of skeletal anchored treatment modalities for the correction of maxillary retrognathia.

PubMed

Sar, Cağla; Sahinoğlu, Zahire; Özçirpici, Ayça Arman; Uçkan, Sina

2014-01-01

The aim of this clinical study was to investigate the skeletal, dentoalveolar, and soft-tissue effects of 2 skeletal anchorage rationales for Class III treatment compared with an untreated Class III control group. Fifty-one subjects who were in the prepubertal or pubertal growth period were included in the study. In group 1 (n = 17), facemasks were applied from miniplates placed in the lateral nasal walls of the maxilla, and intermaxillary Class III elastics were applied from symphyseal miniplates to a bonded appliance on the maxilla in group 2 (n = 17). These skeletal anchored groups were compared with an untreated control group (n = 17). Lateral cephalometric radiographs were obtained at the beginning and the end of the observation periods in all groups and analyzed according to the structural superimposition method. Differences between the groups were assessed with the Wilcoxon signed rank test or the paired-samples t test. The treatment periods were 7.4 and 7.6 months in groups 1 and 2, respectively, and the untreated control group was observed for 7.5 months. The maxilla moved forward by 3.11 mm in group 1 and by 3.82 mm in group 2. The counterclockwise rotation of the maxilla was significantly less in group 1 compared with group 2 (P <0.01). The mandible showed clockwise rotation and was positioned downward and backward in the treatment groups, and it was significantly greater in group 2 compared with group 1 (P <0.01). Changes in the maxillary incisor measurements were negligible in group 1 compared with group 2. A significant amount of mandibular incisor retroclination was seen in group 1, and a significant proclination was seen in group 2. The maxillomandibular relationships and the soft-tissue profiles were improved remarkably in both treatment groups. The protocols of miniplates with facemasks and miniplates with Class III elastics offer valid alternatives to conventional methods in severe skeletal Class III patients. However, the 2 maxillary protraction protocols demonstrated significant skeletal and dentoalveolar effects. The miniplate with facemask protocol is preferred for patients with severe maxillary retrusion and a high-angle vertical pattern, whereas in patients with a decreased or normal vertical pattern and retroclined mandibular incisors, miniplates with Class III elastics can be the intraoral treatment option. Therefore, the exact indication of the procedure should be considered carefully. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Validity of the American Board of Orthodontics Discrepancy Index and the Peer Assessment Rating Index for comprehensive evaluation of malocclusion severity.

PubMed

Liu, S; Oh, H; Chambers, D W; Baumrind, S; Xu, T

2017-08-01

To assess the validity of the American Board of Orthodontics Discrepancy Index (ABO-DI) and Peer Assessment Rating (PAR) Index in evaluating malocclusion severity in Chinese orthodontic patients. A stratified random sample of 120 orthodontic patients based on Angle classification was collected from six university orthodontic centres. Sixty-nine orthodontists rated malocclusion severity on a five-point scale by assessing a full set of pre-treatment records for each case and listed reasons for their decision. Their judgement was then compared with ABO-DI and PAR scores determined by three calibrated examiners. Excellent interexaminer reliability of clinician judgement, ABO-DI and PAR index was demonstrated by the Intraclass Correlation Coefficient (rho= 0.995, 0.990 and 0.964, respectively). Both the ABO-DI and US-PAR index showed good correlation with clinician judgement (r=.700 and r=.707, respectively). There was variability among the different Angle classifications: the ABO-DI showed the highest correlation with clinician judgement in Class II patients (r=.780), whereas the US-PAR index showed the highest correlation with clinician judgement in Class III patients (r=.710). Both indices demonstrated the lowest correlations with clinician judgement in Class I patients. With strong interexaminer agreement, the panel consensus was used for validating the ABO-DI and US-PAR index for malocclusion severity. Overall, the ABO-DI and US-PAR index were reliable for measuring malocclusion severity with significantly variable weightings for different Angle classifications. Further modification of the indices for different Angle classification may be indicated. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Constraints On the Emission Geometries and Spin Evolution Of Gamma-Ray Millisecond Pulsars

NASA Technical Reports Server (NTRS)

Johnson, T. J.; Venter, C.; Harding, A. K.; Guillemot, L.; Smith, D. A.; Kramer, M.; Celik, O.; den Hartog, P. R.; Ferrara, E. C.; Hou, X.;

Constraints On The Emission Geometries And Spin Evolution Of Gamma-Ray Millisecond Pulsars

DOE PAGES

Johnson, T. J.; Venter, C.; Harding, A. K.; ...

2014-06-18

Millisecond pulsars (MSPs) are a growing class of gamma-ray emitters. Pulsed gamma-ray signals have been detected from more than 40 MSPs with the Fermi Large Area Telescope (LAT). The wider radio beams and more compact magnetospheres of MSPs enable studies of emission geometries over a broader range of phase space than non-recycled radio-loud gamma-ray pulsars. We have modeled the gamma-ray light curves of 40 LAT-detected MSPs using geometric emission models assuming a vacuum retarded-dipole magnetic eld. We modeled the radio pro les using a single-altitude hollow-cone beam, with a core component when indicated by polarimetry; however, for MSPs with gamma-raymore » and radio light curve peaks occurring at nearly the same rotational phase we assume that the radio emission is co-located with the gamma rays and caustic in nature. The best- t parameters and con dence intervals are determined using a maximum likelihood technique. We divide the light curves into three model classes, with gamma-ray peaks trailing (Class I), aligned (Class II) or leading (Class III) the radio peaks. Outer gap and slot gap (two-pole caustic) models best t roughly equal numbers of Class I and II, while Class III are exclusively t with pair-starved polar cap models. Distinguishing between the model classes based on typical derived parameters is diffcult. We explore the evolution of magnetic inclination angle with period and spin-down power, nding possible correlations. While the presence of signi cant off- peak emission can often be used as a discriminator between outer gap and slot gap models, a hybrid model may be needed.« less

25 CFR 522.10 - Individually owned class II and class III gaming operations other than those operating on...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Individually owned class II and class III gaming... GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.10 Individually owned class II and class III...

25 CFR 291.5 - Where must the proposal requesting Class III gaming procedures be filed?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Where must the proposal requesting Class III gaming... ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.5 Where must the proposal requesting Class III gaming procedures be filed? Any proposal requesting Class III gaming procedures must be filed with the...

25 CFR 291.13 - When do Class III gaming procedures for an Indian tribe become effective?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false When do Class III gaming procedures for an Indian tribe... ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.13 When do Class III gaming procedures for an Indian tribe become effective? Upon approval of Class III gaming procedures for the Indian tribe under either...

25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or until...

25 CFR 291.14 - How can Class III gaming procedures approved by the Secretary be amended?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How can Class III gaming procedures approved by the... ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.14 How can Class III gaming procedures approved by the Secretary be amended? An Indian tribe may ask the Secretary to amend approved Class III gaming...

25 CFR 522.8 - Publication of class III ordinance and approval.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 522.8 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.8 Publication of class III ordinance and approval. The Chairman shall publish a class III tribal gaming...

25 CFR 522.12 - Revocation of class III gaming.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Revocation of class III gaming. 522.12 Section 522.12 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.12 Revocation of class III...

Early orthodontic treatment for Class III malocclusion: A systematic review and meta-analysis.

PubMed

Woon, See Choong; Thiruvenkatachari, Badri

2017-01-01

Class III malocclusion affects between 5% and 15% of our population. The 2 most common dilemmas surrounding Class III treatment are the timing of treatment and the type of appliance. A number of appliances have been used to correct a Class III skeletal discrepancy, but there is little evidence available on their effectiveness in the long term. Similarly, early treatment of Class III malocclusion has been practiced with increasing interest. However, there has been no solid evidence on the benefits in the long term. The aim of this systematic review was to evaluate the effectiveness of orthodontic/orthopedic methods used in the early treatment of Class III malocclusion in the short and long terms. Several sources were used to identify all relevant studies independently of language. The Cochrane Central Register of Controlled Trials, Cochrane Database of Systematic Reviews, Embase (Ovid), and MEDLINE (Ovid) were searched to June 2016. The selection criteria included randomized controlled trials (RCTs) and prospective controlled clinical trials (CCTs) of children between the ages of 7 and 12 years on early treatment with any type of orthodontic/orthopedic appliance compared with another appliance to correct Class III malocclusion or with an untreated control group. The primary outcome measure was correction of reverse overjet, and the secondary outcomes included skeletal changes, soft tissue changes, quality of life, patient compliance, adverse effect, Peer Assessment Rating score, and treatment time. The search results were screened for inclusion, and the data extracted by 2 independent authors. The data were analyzed using software (version 5.1, Review Manager; The Nordic Cochrane Centre, The Cochrane Collaboration; Copenhagen, Denmark). The mean differences with 95% confidence intervals were expressed for the continuous data. Random effects were carried out with high levels of clinical or statistical heterogeneity and fixed affects when the heterogeneity was low. Fifteen studies, 9 RCTs and 6 CCTs, were included in this review. In the RCT group, only 3 of 9 studies were assessed at low risk of bias, and the others were at high or unclear risk of bias. All 6 CCT studies were classified as high risk of bias. Three RCTs involving 141 participants looked at the comparison between protraction facemask and untreated control. The results for reverse overjet (mean difference, 2.5 mm; 95% CI, 1.21-3.79; P = 0.0001) and ANB angle (mean difference, 3.90°; 95% CI, 3.54-4.25; P <0.0001) were statistically significant favoring the facemask group. All CCTs demonstrated a statistically significant benefit in favor of the use of each appliance. However, the studies had high risk of bias. There is a moderate amount of evidence to show that early treatment with a facemask results in positive improvement for both skeletal and dental effects in the short term. However, there was lack of evidence on long-term benefits. There is some evidence with regard to the chincup, tandem traction bow appliance, and removable mandibular retractor, but the studies had a high risk of bias. Further high-quality, long-term studies are required to evaluate the early treatment effects for Class III malocclusion patients. PROSPERO CRD42015024252. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

25 CFR 522.7 - Disapproval of a class III ordinance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Disapproval of a class III ordinance. 522.7 Section 522.7 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.7 Disapproval of a class III...

Nuclear Resonance Vibrational Spectroscopic Definition of Peroxy Intermediates in Nonheme Iron Sites

DOE PAGES

Sutherlin, Kyle D.; Liu, Lei V.; Lee, Yong-Min; ...

2016-11-02

Fe III-(hydro)peroxy intermediates have been isolated in two classes of mononuclear nonheme Fe enzymes that are important in bioremediation: the Rieske dioxygenases and the extradiol dioxygenases. The binding mode and protonation state of the peroxide moieties in these intermediates are not well-defined, due to a lack of vibrational structural data. Nuclear resonance vibrational spectroscopy (NRVS) is an important technique for obtaining vibrational information on these and other intermediates, as it is sensitive to all normal modes with Fe displacement. Here in this paper, we present the NRVS spectra of side-on Fe III-peroxy and end-on Fe III-hydroperoxy model complexes and assignmore » these spectra using calibrated DFT calculations. We then use DFT calculations to define and understand the changes in the NRVS spectra that arise from protonation and from opening the Fe–O–O angle. This study identifies four spectroscopic handles that will enable definition of the binding mode and protonation state of Fe III-peroxy intermediates in mononuclear nonheme Fe enzymes. These structural differences are important in determining the frontier molecular orbitals available for reactivity.« less

Nuclear Resonance Vibrational Spectroscopic Definition of Peroxy Intermediates in Nonheme Iron Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutherlin, Kyle D.; Liu, Lei V.; Lee, Yong-Min

Fe III-(hydro)peroxy intermediates have been isolated in two classes of mononuclear nonheme Fe enzymes that are important in bioremediation: the Rieske dioxygenases and the extradiol dioxygenases. The binding mode and protonation state of the peroxide moieties in these intermediates are not well-defined, due to a lack of vibrational structural data. Nuclear resonance vibrational spectroscopy (NRVS) is an important technique for obtaining vibrational information on these and other intermediates, as it is sensitive to all normal modes with Fe displacement. Here in this paper, we present the NRVS spectra of side-on Fe III-peroxy and end-on Fe III-hydroperoxy model complexes and assignmore » these spectra using calibrated DFT calculations. We then use DFT calculations to define and understand the changes in the NRVS spectra that arise from protonation and from opening the Fe–O–O angle. This study identifies four spectroscopic handles that will enable definition of the binding mode and protonation state of Fe III-peroxy intermediates in mononuclear nonheme Fe enzymes. These structural differences are important in determining the frontier molecular orbitals available for reactivity.« less

Nuclear Resonance Vibrational Spectroscopic Definition of Peroxy Intermediates in Nonheme Iron Sites.

PubMed

Sutherlin, Kyle D; Liu, Lei V; Lee, Yong-Min; Kwak, Yeonju; Yoda, Yoshitaka; Saito, Makina; Kurokuzu, Masayuki; Kobayashi, Yasuhiro; Seto, Makoto; Que, Lawrence; Nam, Wonwoo; Solomon, Edward I

2016-11-02

Fe III -(hydro)peroxy intermediates have been isolated in two classes of mononuclear nonheme Fe enzymes that are important in bioremediation: the Rieske dioxygenases and the extradiol dioxygenases. The binding mode and protonation state of the peroxide moieties in these intermediates are not well-defined, due to a lack of vibrational structural data. Nuclear resonance vibrational spectroscopy (NRVS) is an important technique for obtaining vibrational information on these and other intermediates, as it is sensitive to all normal modes with Fe displacement. Here, we present the NRVS spectra of side-on Fe III -peroxy and end-on Fe III -hydroperoxy model complexes and assign these spectra using calibrated DFT calculations. We then use DFT calculations to define and understand the changes in the NRVS spectra that arise from protonation and from opening the Fe-O-O angle. This study identifies four spectroscopic handles that will enable definition of the binding mode and protonation state of Fe III -peroxy intermediates in mononuclear nonheme Fe enzymes. These structural differences are important in determining the frontier molecular orbitals available for reactivity.

25 CFR 291.3 - When may an Indian tribe ask the Secretary to issue Class III gaming procedures?

Code of Federal Regulations, 2010 CFR

2010-04-01

... III gaming procedures? 291.3 Section 291.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.3 When may an Indian tribe ask the Secretary to issue Class III gaming procedures? An Indian tribe may ask the Secretary to issue Class III...

Pattern of clefts and dental anomalies in six-year-old children: a retrospective observational study in western Norway.

PubMed

Sæle, Paul; Østhus, Eirik; Ådalen, Sondre; Nasir, Elwalid F; Mustafa, Manal

2017-03-01

Clefts of the lip and/or palate (CL/P) are the most common congenital disorders of the head and neck. In Norway, the incidence is 1.9/1000 live births. The aim of this study was to investigate the frequency and distribution of various types of clefts and dental anomalies in patients treated by the cleft lip and palate (CLP) team in Bergen, Norway. The material comprised the records of patients 6 years of age, examined by the CLP team in Bergen from spring 1993 to autumn 2012, incomplete records were excluded. The records of 989 patients were analysed, using frequencies and Chi-square test to compare differences in percentages between groups. The gender distribution was 58.8% male and 41.2% female. Isolated cleft palate (CP) was the most common condition (39.5%). Clefts of the lip, jaw and palate (CLP) constituted (30%) of cases and (30.5%) had isolated cleft lip (CL). The frequencies of agenesis, supernumerary and peg-shaped teeth were (36.5%), (17.8%) and (7.5%), respectively. Over 50% of the study population were diagnosed with one or more malocclusion. Of the CLP patients, 61.4% had Angle Class III occlusion. Statistical analysis disclosed a positive association of agenesis with Class III occlusion (OR =1.8, p≤ 0.001). The findings supported the hypothesis that the distribution of dental anomalies and occlusal disorders varied among patients with CL, CP and CLP. In patients with cleft, there is a twofold chance to get Class III malocclusion in the presence of agenesis.

Nasal changes after orthognathic surgery for patients with prognathism and Class III malocclusion: analysis using three-dimensional photogrammetry.

PubMed

Worasakwutiphong, Saran; Chuang, Ya-Fang; Chang, Hsin-Wen; Lin, Hsiu-Hsia; Lin, Pei-Ju; Lo, Lun-Jou

2015-02-01

Orthognathic surgery alters the position of maxilla and mandible, and consequently changes the nasal shape. The nasal change remains a concern to Asian patients. The aim of this study was to measure the nasal changes using a novel three-dimensional photographic imaging method. A total of 38 patients with Class III malocclusion and prognathism were enrolled. All patients underwent two-jaw surgery with the standard technique. A nasal alar cinching suture was included at the end of procedure. Facial landmarks and nasal morphology were defined and measured from pre- and postoperative three-dimensional photographic images. Intra-rater errors on landmark identification were controlled. Patient's reports of perceptual nasal changes were recorded. The average width of the alar base and subalare remained similar after surgery. Alar width was increased by 0.74 mm. Nasal height and length remained the same. Nasolabial angle increased significantly. The area of nostril show revealed a significant increase and was correlated with a decrease of columella inclination. Nasal tip projection decreased significantly, by 1.99 mm. Preoperative nasal morphology was different between patients with and without cleft lip/palate, but most nasal changes were concordant. In the self-perception, 37% of patients reported improved nasal appearance, 58% reported no change, and 5% were not satisfied with the nasal changes. After the surgery, characteristic nasal changes occurred with an increase of nasolabial angle and nostril show, but a preserved nasal width. The majority of patients did not perceive adverse nasal changes. Copyright © 2014. Published by Elsevier B.V.

Pathological (late) fractures of the mandibular angle after lower third molar removal: a case series.

PubMed

Cutilli, Tommaso; Bourelaki, Theodora; Scarsella, Secondo; Fabio, Desiderio Di; Pontecorvi, Emanuele; Cargini, Pasqualino; Junquera, Luis

2013-04-30

Pathological (late) fracture of the mandibular angle after third molar surgery is very rare (0.005% of third molar removals). There are 94 cases reported in the literature; cases associated with osseous pathologies such as osteomyelitis or any local and systemic diseases that may compromise mandibular bone strength have not been included. We describe three new cases of pathological (late) fracture of the mandibular angle after third molar surgery. The first patient was a 27-year-old Caucasian man who had undergone surgical removal of a 3.8, mesioangular variety, class II-C third molar 20 days before admission to our clinic. The fracture of his left mandibular angle, complete and composed, occurred during chewing. The second patient was a 32-year-old Caucasian man. He had undergone surgical removal of a 3.8, mesioangular variety, class II-B third molar 22 days before his admission. The fracture, which occurred during mastication, was studied by computed tomography that showed reparative tissue in the fracture site. The third patient was a 36-year-old Caucasian man who had undergone surgical removal of a 3.8, vertical variety, class II-C third molar 25 days before the observation. In this case the fracture of his mandibular angle was oblique (unfavorable), complete and composed. The fracture had occurred during chewing. We studied the fracture by optical projection tomography and computed tomography.All of the surgical removals of the 3.8 third molars, performed by the patients' dentists who had more than 10 years of experience, were difficult. We treated the fractures with open surgical reduction, internal fixation by titanium miniplates and intermaxillary elastic fixation removed after 6 weeks. The literature indicates that the risk of pathological (late) fracture of the mandibular angle after third molar surgery for total inclusions (class II-III, type C) is twice that of partial inclusions due to the necessity of ostectomies more generous than those for partial inclusions. Other important factors are the anatomy of the teeth and the features of the teeth roots. These fractures predominantly occur in patients who are older than 25 years. The highest incidence (67.8% of cases) is found in the second and third week postsurgery. We emphasize that before the third molar surgery it is extremely important to always provide adequate instructions to the patient in order to avoid early masticatory loads and prevent this rare event.

25 CFR 291.12 - Who will monitor and enforce tribal compliance with the Class III gaming procedures?

Code of Federal Regulations, 2010 CFR

2010-04-01

... Class III gaming procedures? 291.12 Section 291.12 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.12 Who will monitor and enforce tribal compliance with the Class III gaming procedures? The Indian tribe and the State may have an agreement...

49 CFR 1150.33 - Information to be contained in notice-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... that involve creation of Class III carriers. 1150.33 Section 1150.33 Transportation Other Regulations.... 10901 § 1150.33 Information to be contained in notice—transactions that involve creation of Class III...: § 1150.33 Information to be contained in notice—transactions that involve creation of Class III carriers...

[Evaluation of the correction of the skeletal class III malocclusion by distalization of the whole mandible dentition with micro-implant anchorage].

PubMed

2017-06-18

To evaluate the clinical effect of distalizing mandibular dentition with micro-implant in patients with skeletal class III malocclusion. In the study, 20 patients with skeletal class IIImalocclusion were selected. They are consist of 8 males and 12 female with an age range from 16 to 38 years old and an average age of (21.5±5.6) years.They were treated with straight wire technique and the implant were inserted into the mandibular external oblique line to distlize the lower dentition to a class I molar relationships. Cephalometrics films were taken before and after treatment. The changes of hard tissue and soft tissue were analyzed by evaluating 26 measurement measurements. Class I molar relationships were achieved, and the profile were improved after treatment. ANB increased by (0.80±1.02) °,Wits increased by (1.67±1.74) mm,after treatment (P<0.05). The lower dentition were significantly retracted after treatment with L1-NB distance decreased by(2.64±1.50) mm, P<0.05; the mesial buccal cusp and mesial root of the lower first molars were retracted by (3.26±1.95) mm and (0.79±1.27) mm respectively (P<0.05); the mesial buccal cusp of the lower second molars were retracted by (3.06±1.80) mm (P<0.05). After treatment, mandibular teeth got up-righted distally. From incisors to molar, L1/MP, L5/MP, L6/MP, L7/MP angle decreased by (6.37±8.53)°, (10.59±8.50)°, (11.48±7.22)°, (15.72±7.16)°on average respectively (P<0.05), all of those changes had the statically significant effects. Soft tissue change after treatment, the distance from lower lip to esthetic plane were decreased by (1.70±1.59) mm on average (P<0.05). Distalizing mandibular dentition with micro-implant can get an satisfying result in patients with skeletal class III malocclusion, the lower teeth were retracted by controlled tipping movement.

Postoperative surgical complications of lymphadenohysterocolpectomy

PubMed Central

Marin, F; Pleşca, M; Bordea, CI; Voinea, SC; Burlănescu, I; Ichim, E; Jianu, CG; Nicolăescu, RR; Teodosie, MP; Maher, K; Blidaru, A

2014-01-01

Rationale The current standard surgical treatment for the cervix and uterine cancer is the radical hysterectomy (lymphadenohysterocolpectomy). This has the risk of intraoperative accidents and postoperative associated morbidity. Objective The purpose of this article is the evaluation and quantification of the associated complications in comparison to the postoperative morbidity which resulted after different types of radical hysterectomy. Methods and results Patients were divided according to the type of surgery performed as follows: for cervical cancer – group A- 37 classic radical hysterectomies Class III Piver - Rutledge -Smith ( PRS ), group B -208 modified radical hysterectomies Class II PRS and for uterine cancer- group C -79 extended hysterectomies with pelvic lymphadenectomy from which 17 patients with paraaortic lymphnode biopsy . All patients performed preoperative radiotherapy and 88 of them associated radiosensitization. Discussion Early complications were intra-abdominal bleeding ( 2.7% Class III PRS vs 0.48% Class II PRS), supra-aponeurotic hematoma ( 5.4% III vs 2.4% II) , dynamic ileus (2.7% III vs 0.96% II) and uro - genital fistulas (5.4% III vs 0.96% II).The late complications were the bladder dysfunction (21.6% III vs 16.35% II) , lower limb lymphedema (13.5% III vs 11.5% II), urethral strictures (10.8% III vs 4.8% II) , incisional hernias ( 8.1% III vs 7.2% II), persistent pelvic pain (18.91% III vs 7.7% II), bowel obstruction (5.4% III vs 1.4% II) and deterioration of sexual function (83.3% III vs 53.8% II). PRS class II radical hysterectomy is associated with fewer complications than PRS class III radical hysterectomy , except for the complications of lymphadenectomy . A new method that might reduce these complications is a selective lymphadenectomy represented by sentinel node biopsy . In conclusion PRS class II radical hysterectomy associated with neoadjuvant radiotherapy is a therapeutic option for the incipient stages of cervical cancer. Abbreviations: PRS- Piver Rutledge-Smith, II- class II, III- class III PMID:24653760

How Do Patients and Parents Decide for Orthodontic Treatment-Effects of Malocclusion, Personal Expectations, Education and Media.

PubMed

Tuncer, C; Canigur Bavbek, N; Balos Tuncer, B; Ayhan Bani, A; Çelik, B

2015-01-01

To examine patients' and parents' perceptions and expectations from orthodontic treatment. 491 patients (274 female, 217 male) aged 14-22 years, and 399 parents (245 female, 154 male) completed a questionnaire about preferences, needs and expectations about orthodontic treatment, and scored the present problem. Continuous variables were compared by Mann-Whitney U and Kruskal-Wallis tests, whereas Chi-square test was used for categorical variables. Patients'(77.1%) and parents'(84.6%), decision about orthodontic treatments were influenced by suggestion of dentists. Patients who decided to attend to clinic by themselves were higher than parents (p=0.006). Dental aesthetics was the determinant factor for treatment demand for patients(61.0%) and parents(57.3%). Improvement in oral functions was more important for Class III patients than Class I patients (p=0.040). Adult patients/parents with higher education gave more importance to oral functions as well as dental aesthetics (p=0.031). There was no difference among Angle classifications regarding orthodontic problem scores. Parents found media sources valuable (p=0.018) but majority expected dentists for information about orthodontic treatments. Education degree of adult patients/parents effected this decision(p=0.002). Desire to have better dental aesthetics was the primary motivating factor for all participants. Clinicians should consider concerns of Class III patients about oral functions during treatment planning.

The Effect of Excipients on the Permeability of BCS Class III Compounds and Implications for Biowaivers.

PubMed

Parr, Alan; Hidalgo, Ismael J; Bode, Chris; Brown, William; Yazdanian, Mehran; Gonzalez, Mario A; Sagawa, Kazuko; Miller, Kevin; Jiang, Wenlei; Stippler, Erika S

2016-01-01

Currently, the FDA allows biowaivers for Class I (high solubility and high permeability) and Class III (high solubility and low permeability) compounds of the Biopharmaceutics Classification System (BCS). Scientific evidence should be provided to support biowaivers for BCS Class I and Class III (high solubility and low permeability) compounds. Data on the effects of excipients on drug permeability are needed to demonstrate that commonly used excipients do not affect the permeability of BCS Class III compounds, which would support the application of biowaivers to Class III compounds. This study was designed to generate such data by assessing the permeability of four BCS Class III compounds and one Class I compound in the presence and absence of five commonly used excipients. The permeability of each of the compounds was assessed, at three to five concentrations, with each excipient in two different models: Caco-2 cell monolayers, and in situ rat intestinal perfusion. No substantial increases in the permeability of any of the compounds were observed in the presence of any of the tested excipients in either of the models, with the exception of disruption of Caco-2 cell monolayer integrity by sodium lauryl sulfate at 0.1 mg/ml and higher. The results suggest that the absorption of these four BCS Class III compounds would not be greatly affected by the tested excipients. This may have implications in supporting biowaivers for BCS Class III compounds in general.

Latent Class Analysis of Differential Item Functioning on the Peabody Picture Vocabulary Test-III

ERIC Educational Resources Information Center

Webb, Mi-young Lee; Cohen, Allan S.; Schwanenflugel, Paula J.

2008-01-01

This study investigated the use of latent class analysis for the detection of differences in item functioning on the Peabody Picture Vocabulary Test-Third Edition (PPVT-III). A two-class solution for a latent class model appeared to be defined in part by ability because Class 1 was lower in ability than Class 2 on both the PPVT-III and the…

49 CFR 572.146 - Test conditions and instrumentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Head acceleration—Class 1000 (2) Neck (i) Force—Class 1000 (ii) Moments—Class 600 (iii) Pendulum... acceleration—Class 1000 (ii) Spine and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv...

49 CFR 572.146 - Test conditions and instrumentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Head acceleration—Class 1000 (2) Neck (i) Force—Class 1000 (ii) Moments—Class 600 (iii) Pendulum... acceleration—Class 1000 (ii) Spine and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv...

49 CFR 572.146 - Test conditions and instrumentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Head acceleration—Class 1000 (2) Neck (i) Force—Class 1000 (ii) Moments—Class 600 (iii) Pendulum... acceleration—Class 1000 (ii) Spine and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv...

49 CFR 572.146 - Test conditions and instrumentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Head acceleration—Class 1000 (2) Neck (i) Force—Class 1000 (ii) Moments—Class 600 (iii) Pendulum... acceleration—Class 1000 (ii) Spine and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv...

49 CFR 572.146 - Test conditions and instrumentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Head acceleration—Class 1000 (2) Neck (i) Force—Class 1000 (ii) Moments—Class 600 (iii) Pendulum... acceleration—Class 1000 (ii) Spine and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv...

Ethnicity and skeletal Class III morphology: a pubertal growth analysis using thin-plate spline analysis.

PubMed

Alkhamrah, B; Terada, K; Yamaki, M; Ali, I M; Hanada, K

2001-01-01

A longitudinal retrospective study using thin-plate spline analysis was used to investigate skeletal Class III etiology in Japanese female adolescents. Headfilms of 40 subjects were chosen from the archives of the Orthodontic department at Niigata University Dental Hospital, and were traced at IIIB and IVA Hellman dental ages. Twenty-eight homologous landmarks, representing hard and soft tissue, were digitized. These were used to reproduce a consensus for the profilogram, craniomaxillary complex, mandible, and soft tissue for each age and skeletal group. Generalized least-square analysis revealed a significant shape difference between age-matched groups (P < .001), except for the craniomaxillary complex at stage IVA. T test for size analysis showed unequivocally increased mandibular size in skeletal Class III, which directly increased the craniofacial size collectively (P < .05). A deviant profilogram showed anisotropy displaying as maxillary deficiency, acute cranial base, and obtuse gonial angle in addition to increased facial height at stage IIIB. Maxillary retrusion decreased while the mandible showed excessive incremental growth and a forward position caused by deficient orthocephalization at stage IVA. Craniomaxillary complex total spline and partial warps (PW)3 and 2 showed a maxillary retrusion at stage IIIB opposite an acute cranial base at stage IVA. Mandibular total spline and PW4, 5 showed changes affecting most landmarks and their spatial interrelationship, especially a stretch along the articulare-pogonion axis. In soft tissue analysis, PW8 showed large and local changes which paralleled the underlying hard tissue components. Allometry of the mandible and anisotropy of the cranial base, the maxilla, and the mandible asserted the complexity of craniofacial growth and the difficulty of predicting its outcome.

Modeling the chelation of As(III) in lewisite by dithiols using density functional theory and solvent-assisted proton exchange.

PubMed

Harper, Lenora K; Bayse, Craig A

2015-12-01

Dithiols such as British anti-lewisite (BAL, rac-2,3-dimercaptopropanol) are an important class of antidotes for the blister agent lewisite (trans-2-chlorovinyldichloroarsine) and, more generally, are chelating agents for arsenic and other toxic metals. The reaction of the vicinal thiols of BAL with lewisite through the chelation of the As(III) center has been modeled using density functional theory (DFT) and solvent-assisted proton exchange (SAPE), a microsolvation method that uses a network of water molecules to mimic the role of bulk solvent in models of aqueous phase chemical reactions. The small activation barriers for the stepwise SN2-type nucleophilic attack of BAL on lewisite (0.7-4.9kcal/mol) are consistent with the favorable leaving group properties of the chloride and the affinity of As(III) for soft sulfur nucleophiles. Small, but insignificant, differences in activation barriers were found for the initial attack of the primary versus secondary thiol of BAL and the R vs S enantiomer. An examination of the relative stability of various dithiol-lewisite complexes shows that ethanedithiols like BAL form the most favorable chelation complexes because the angles formed in five-membered ring are most consistent with the hybridization of As(III). More obtuse S-As-S angles are required for larger chelate rings, but internal As⋯N or As⋯O interactions can enhance the stability of moderate-sized rings. The low barriers for lewisite detoxification by BAL and the greater stability of the chelation complexes of small dithiols are consistent with the rapid reversal of toxicity demonstrated in previously reported animal models. Copyright © 2015 Elsevier Inc. All rights reserved.

Skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances and lower premolar extractions.

PubMed

Abu Alhaija, Elham S J; Al-Khateeb, Susan N

2011-05-01

Mild Class III malocciusions can be treated by upper incisor proclination and lower incisor retroclination following extraction of the lower first premolars. To compare the skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances, Class III traction and lower first premolar extractions with the changes in a group of untreated Class III patients. The Treatment group consisted of 30 Class III patients (Mean age 13.69 +/- 1.48 years) who were treated by upper and lower fixed appliances, Class III intermaxillary traction and lower first premolar extractions for 2.88 +/- 1.12 years. The Control group consisted of 20 untreated Class III patients (Mean age 13.51 +/- 0.95) matched for age and gender. The T1 to T2 changes in the treated and untreated groups were compared using a paired t-test while differences between the two groups were compared with an independent t-test. During treatment, the upper incisors were proclined about 1 degree and the lower incisors were retroclined 8 degrees. Small, but statistically significant changes in SNB, Wits and the overlying soft tissues accompanied the changes in incisor inclination. At the end of treatment a positive overbite and overjet were achieved. The increase in lower facial height in the Treatment group was comparable with the change in the Control group. A range of mild to moderate Class III malocclusions can be treated by dentoalveolar compensation.

Characterization of a posed smile and evaluation of facial attractiveness by panel perception and its correlation with hard and soft tissue.

PubMed

Malhotra, Smriti; Sidhu, Maninder Singh; Prabhakar, Mona; Kochhar, Anuraj Singh

2012-01-01

To examine whether specific hard and soft tissue had any effect on smile characteristics and to ascertain the opinions of laypersons and clinicians in evaluating facial attractiveness among different occlusions. Photographs of posed smiles, along with profiles and full faces, of 76 patients with different occlusions were captured, and a lateral cephalogram of each subject was traced. These photographs were judged by a panel of 10 clinicians and 10 laypersons on a 5-point visual analog scale. Quantitative measurements were carried out on the smile images for 14 smile characteristics. The effect of hard and soft tissue on these characteristics was also examined. The upper vermilion lip thickness was affected by Pt.A-UI and E-line to upper lip, while the lower vermilion lip thickness was affected by lower anterior facial height. FMA had a significant positive effect on gingival display (P ≤ .05). This meant that an increase in FMA also caused the gingival display to increase. The nasolabial angle showed a significant positive effect on incisal display, while FMA showed a negative effect on intercanine width. Lower facial height and FMA had a significant negative effect on the smile index. A correlation was found between the judgments of clinicians and laypersons. Both judged Class I relationships to be the most attractive. FMA was found to have a positive effect on the amount of gingival display. It was also observed that patients with Class II Division 1 relationships had the thickest lips compared with patients having other types of occlusions. Class III patients exhibited no gingival display on smile. Patients with Class I showed the maximum smile width, while patients with Class III showed the least amount of buccal corridor.

Age and skeletal type-related changes of some cephalometric parameters in Finnish girls.

PubMed

Haavikko, K; Rahkamo, A

1989-08-01

The aim of the present study was to define some cephalometric standards in a group of 217 Finnish girls from 7.0 to 18.0 years of age and furthermore to estimate the influence of the skeletal classes on these standards. Age-related changes were seen between the standards of the youngest (7.0-9.5 years) and the oldest (14.5-18.0 years) group where 9 out of 15 of the inspected angles increased with age, three of them ANPr***, SNPg** and SNB* significantly, and 6 decreased, four of them significantly: ANPg***, ANB**, NL/ML* and RL/ML*. The cranial base angles did not show any significant age-related or skeletal type-related variations. Between the skeletal groups I and II significant differences were seen in 11 variables. Between skeletal I and III groups, 7 angles were significantly different. The results demonstrate that when cephalometric standards are used, they should be derived from that population, they should be age related, and the skeletal pattern should be taken into account.

A three-dimensional analysis of skeletal and dental characteristics in skeletal class III patients with facial asymmetry.

PubMed

Yu, Jinfeng; Hu, Yun; Huang, Mingna; Chen, Jun; Ding, Xiaoqian; Zheng, Leilei

2018-03-15

To evaluate the skeletal and dental characteristics in skeletal class III patients with facial asymmetry and to analyse the relationships among various parts of the stomatognathic system to provide a theoretical basis for clinical practice. Asymmetric cone-beam computed tomography data acquired from 56 patients were evaluated using Mimics 10.0 and 3-Matic software. Skeletal and dental measurements were performed to assess the three-dimensional differences between two sides. Pearson correlation analysis was used to determine the correlations among measurements. Linear measurements, such as ramal height, mandible body length, ramal height above the sigmoid notch (RHASN), maxillary height, condylar height, buccal and total cancellous bone thickness, and measurements of condylar size, were significantly larger on the nondeviated side than on the deviated side (P <  0.05). Crown root ratio and buccolingual angle of mandibular first molar were found to be significantly smaller on the nondeviated side than on the deviated side (P <  0.05). A negative correlation was also discovered between the buccolingual angle of mandibular first molar and the ramal height (P <  0.01). In patients with facial asymmetry, asymmetries in the mandible, maxilla and condylar morphology, and skeletal canting served as major components of skeletal asymmetry. Furthermore, a reduced thickness of buccal cancellous bone and a larger crown root ratio were found on the deviated side, indicating that orthodontic camouflage has limitations and potential risks. A combination of orthodontics and orthognathic surgery may be the advisable choice in patients with a menton deviation greater than 4 mm. An important association between vertical skeletal disharmony and dental compensation was also observed.

Treatment Options for Class III Malocclusion in Growing Patients with Emphasis on Maxillary Protraction

PubMed Central

Azamian, Zeinab; Shirban, Farinaz

2016-01-01

It is very difficult to diagnose and treat Class III malocclusion. This type of malocclusion involves a number of cranial base and maxillary and mandibular skeletal and dental compensation components. In Class III malocclusion originating from mandibular prognathism, orthodontic treatment in growing patients is not a good choice and in most cases orthognathic surgery is recommended after the end of growth. Approximately 30–40% of Class III patients exhibit some degree of maxillary deficiency; therefore, devices can be used for maxillary protraction for orthodontic treatment in early mixed dentition. In cases in which dental components are primarily responsible for Class III malocclusion, early therapeutic intervention is recommended. An electronic search was conducted using the Medline database (Entrez PubMed), the Cochrane Collaboration Oral Health Group Database of Clinical Trials, Science Direct, and Scopus. In this review article, we described the treatment options for Class III malocclusion in growing patient with an emphasis on maxillary protraction. It seems that the most important factor for treatment of Class III malocclusion in growing patient is case selection. PMID:27144056

Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

PubMed

Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

2015-12-01

In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3 mm. There was a 4° decrease in the mandibular plane angle to close the skeletal open bite. Retrospective sequential iterations (FEA animation) simulated the clinical response, as documented with longitudinal cephalometrics. The level of periodontal ligament stress was relatively uniform (<5 kPa) for all teeth in the mandibular arch segment. En-masse retraction of the mandibular arch is efficient for conservatively treating a skeletal Class III malocclusion. Posterior mandibular anchorage causes intrusion of the molars to close the vertical dimension of the occlusion and the mandibular plane angle. Instantaneous FEA as modeled here could be used to reasonably predict the clinical results of an applied load. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Interpreting weightings of the peer assessment rating index and the discrepancy index across contexts on Chinese patients.

PubMed

Liu, Siqi; Oh, Heesoo; Chambers, David William; Xu, Tianmin; Baumrind, Sheldon

2018-04-06

Determine optimal weightings of Peer Assessment Rating (PAR) index and Discrepancy Index (DI) for malocclusion severity assessment in Chinese orthodontic patients. Sixty-nine Chinese orthodontists assessed a full set of pre-treatment records from a stratified random sample of 120 subjects gathered from six university orthodontic centres. Using professional judgment as the outcome variable, multiple regression analyses were performed to derive customized weighting systems for the PAR index and DI, for all subjects and each Angle classification subgroup. Professional judgment was consistent, with an Intraclass Correlation Coefficient (ICC) of 0.995. The PAR index or DI can be reliably measured, with ICC = 0.959 and 0.990, respectively. The predictive accuracy of PAR index was greatly improved by the Chinese weighting process (from r = 0.431 to r = 0.788) with almost equal distribution in each Angle classification subgroup. The Chinese-weighted DI showed a higher predictive accuracy, at P = 0.01, compared with the PAR index (r = 0.851 versus r = 0.788). A better performance was found in the Class II group (r = 0.890) when compared to Class I (r = 0.736) and III (r = 0.785) groups. The Chinese-weighted PAR index and DI were capable of predicting 62 per cent and 73 per cent of total variance in the professional judgment of malocclusion severity in Chinese patients. Differential prediction across Angle classifications merits attention since different weighting formulas were found.

49 CFR 572.137 - Test conditions and instrumentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

...—Class 1000 (2) Neck: (i) Forces—Class 1000 (ii) Moments—Class 600 (iii) Pendulum acceleration—Class 180... and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv) Forces—Class 1000 (v...—Class 180 (6) Femur forces and knee pendulum—Class 600 (n) Coordinate signs for instrumentation polarity...

49 CFR 572.137 - Test conditions and instrumentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

...—Class 1000 (2) Neck: (i) Forces—Class 1000 (ii) Moments—Class 600 (iii) Pendulum acceleration—Class 180... and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv) Forces—Class 1000 (v...—Class 180 (6) Femur forces and knee pendulum—Class 600 (n) Coordinate signs for instrumentation polarity...

49 CFR 572.137 - Test conditions and instrumentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

...—Class 1000 (2) Neck: (i) Forces—Class 1000 (ii) Moments—Class 600 (iii) Pendulum acceleration—Class 180... and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv) Forces—Class 1000 (v...—Class 180 (6) Femur forces and knee pendulum—Class 600 (n) Coordinate signs for instrumentation polarity...

49 CFR 572.137 - Test conditions and instrumentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

...—Class 1000 (2) Neck: (i) Forces—Class 1000 (ii) Moments—Class 600 (iii) Pendulum acceleration—Class 180... and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv) Forces—Class 1000 (v...—Class 180 (6) Femur forces and knee pendulum—Class 600 (n) Coordinate signs for instrumentation polarity...

49 CFR 572.137 - Test conditions and instrumentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

...—Class 1000 (2) Neck: (i) Forces—Class 1000 (ii) Moments—Class 600 (iii) Pendulum acceleration—Class 180... and pendulum accelerations—Class 180 (iii) Sternum deflection—Class 600 (iv) Forces—Class 1000 (v...—Class 180 (6) Femur forces and knee pendulum—Class 600 (n) Coordinate signs for instrumentation polarity...

Efficiency of compensatory orthodontic treatment of mild Class III malocclusion with two different bracket systems

PubMed Central

Aragón, Mônica L. C.; Bichara, Lívia M.; Flores-Mir, Carlos; Almeida, Guilherme; Normando, David

2017-01-01

ABSTRACT Objective: The purpose of this study was to assess the efficiency of compensatory orthodontic treatment of patients with mild Class III malocclusion with two preadjusted bracket systems. Method: Fifty-six matched patients consecutively treated for mild Class III malocclusion through compensatory dentoalveolar movements were retrospectively evaluated after analysis of orthodontic records. The sample was divided into two groups according to the brackets used: Group 1 = non-Class III compensated preadjusted brackets, Roth prescription (n = 28); Group 2 = compensated Class III preadjusted brackets, Capelozza III prescription (n = 28). Cephalometric analysis, number of appointments and missed appointments, months using Class III elastics, and bond/band failures were considered. Treatment time, Peer Assessment Rating (PAR) index at the beginning (PAR T1) and end of treatment (PAR T2) were used to calculate treatment efficiency. Comparison was performed using a MANOVA at p< 0.05. Results: Missed appointments, bond or band failures, number of months using the Class III intermaxillary elastics, and cephalometric measurements showed no statistically significant difference (p> 0.05) between groups. Patients treated with Roth brackets had a treatment time 7 months longer (p= 0.01). Significant improvement in the patient’s occlusion (PAR T2-T1) was observed for both groups without difference (p= 0.22). Conclusions: Orthodontic brackets designed for compensation of mild Class III malocclusions appear to be more efficient than non-compensated straight-wire prescription brackets. Treatment time for Class III patients treated with brackets designed for compensation was shorter than with Roth prescription and no difference in the quality of the occlusal outcome was observed. A prospective randomized study is suggested to provide a deeper look into this subject. PMID:29364379

Angle classification revisited 2: a modified Angle classification.

PubMed

Katz, M I

1992-09-01

Edward Angle, in his classification of malocclusions, appears to have made Class I a range of abnormality, not a point of ideal occlusion. Current goals of orthodontic treatment, however, strive for the designation "Class I occlusion" to be synonymous with the point of ideal intermeshing and not a broad range. If contemporary orthodontists are to continue to use Class I as a goal, then it is appropriate that Dr. Angle's century-old classification, be modified to be more precise.

Non-surgical treatment of skeletal class III malocclusion

PubMed Central

Kapadia, Romina M; Shah, Adit P; Diyora, Shamil D; Rathva, Vandana J

2014-01-01

The incidence of skeletal class III malocclusion has a mean of 3% in the Caucasian population, 5% in African-American adolescents and about 14% in the Asian population. In India, the incidence of class III malocclusion is reported to be 3.4%. A patient having class III malocclusion shows findings ranging from edge-to-edge bite to large reverse overjet, with extreme variations of underlying skeletal jaw bases and craniofacial form. This is a case report of a 20-year-old man having skeletal class III malocclusion with concave profile, anterior crossbite and a negative overjet of 3 mm treated non-surgically with extraction of only one lower left first premolar. PMID:24722711

40 CFR 131.35 - Colville Confederated Tribes Indian Reservation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... would be limited to the extent that bacterial infections of eyes, ears, respiratory, or digestive... Creek Class I Coyote Creek Class II Deerhorn Creek Class III Dick Creek Class III Dry Creek Class I...

Relationship between crown-root angulation (collum angle) of maxillary central incisors in Class II, division 2 malocclusion and lower lip line.

PubMed

Srinivasan, Bhadrinath; Kailasam, Vignesh; Chitharanjan, Arun; Ramalingam, Arthi

2013-01-01

The present study aimed to measure the magnitude of the collum angle (crown-root angulation) of maxillary central incisors present in Class II, division 2 malocclusion and to relate the changes in its magnitude with variations in the lower lip line. A set of 120 conventional lateral cephalograms were selected and divided into three groups of 40 each based on the type of malocclusion presented: Class II, division 2 (group 1); Class II, division 1 (group 2); and Class I (group 3). The collum angle of the maxillary central incisor was measured, and the lower lip line was recorded. Analysis of variance (ANOVA) revealed that the mean collum angle was statistically significantly different in the three groups. The mean collum angle was greatest in Class II, division 2 malocclusion (group 1). The mean collum angles were 3.24 ± 4.69 degrees, 0.95 ± 1.06 degrees, and 1.05 ± 1.50 degrees in groups 1, 2, and 3 respectively. In χ ² test comparison of the location of the lower lip line (incisal, middle, or apical third of the central incisor) among the three groups, the lower lip line was found to contact the middle third of the central incisor most frequently in Class II, division 2 malocclusion. ANOVA followed by Tukey honestly significant difference (HSD) test showed that the mean collum angle is significantly increased when the lower lip is in the middle third (P < .05) of the central incisor. Variations in magnitude of the collum angle with the change in the lower lip line suggest a probable etiologic role of the lower lip line in the development of the collum angle.

A Ferredoxin Disulfide Reductase Delivers Electrons to the Methanosarcina barkeri Class III Ribonucleotide Reductase

DOE PAGES

Wei, Yifeng; Li, Bin; Prakash, Divya; ...

2015-11-04

Two subtypes of class III anaerobic ribonucleotide reductases (RNRs) studied so far couple the reduction of ribonucleotides to the oxidation of formate, or the oxidation of NADPH via thioredoxin and thioredoxin reductase. Certain methanogenic archaea contain a phylogenetically distinct third subtype of class III RNR, with distinct active-site residues. Here we report the cloning and recombinant expression of the Methanosarcina barkeri class III RNR and show that the electrons required for ribonucleotide reduction can be delivered by a [4Fe-4S] protein ferredoxin disulfide reductase, and a conserved thioredoxin-like protein NrdH present in the RNR operon. The diversity of class III RNRsmore » reflects the diversity of electron carriers used in anaerobic metabolism« less

Finishing occlusion in Class II or Class III molar relation: therapeutic Class II and III.

PubMed

Nangia, A; Darendeliler, M A

2001-11-01

The most frequent extraction regime consists of the removal of upper and lower premolars. Depending on anchorage requirements, camouflage treatment options, surgical intervention, or the absence of teeth in only one arch, it may become necessary to finalize the occlusion with a one-dental-unit discrepancy between the upper and lower dental arches. Guidelines are presented for finishing occlusions in Class II or Class III molar relation.

Expansion/Facemask Treatment of an Adult Class III Malocclusion.

PubMed

Jackson, Gregory W; Kravitz, Neal D

2014-01-01

The orthodontic treatment of class III malocclusion with a maxillary deficiency is often treated with maxillary protraction with or without expansion. Skeletal and dental changes have been documented which have combined for the protraction of the maxilla and the correction of the class III malocclusion. Concerning the ideal time to treat a developing class III malocclusion, studies have reported that, although early treatment may be the most effective, face mask therapy can provide a viable option for older children as well. But what about young adults? Can the skeletal and dental changes seen in expansion/facemask therapy in children and adolescents be demonstrated in this age group as well, possibly eliminating the need for orthodontic dental camouflage treatment or orthognathic surgery? A case report is presented of an adult class III malocclusion with a Class III skeletal pattern and maxillary retrusion. Treatment was with nonextraction, comprehensive edgewise mechanics with slow maxillary expansion with a bonded expander and protraction facemask.

Comparison of three facebow/semi-adjustable articulator systems for planning orthognathic surgery.

PubMed

O'Malley, A M; Milosevic, A

2000-06-01

Our aim was to measure the steepness of the occlusal plane produced by three different semi-adjustable articulators: the Dentatus Type ARL, Denar MkII, and the Whipmix Quickmount 8800, and to assess the influence of possible systematic errors in positioning of study casts on articulators that are used to plan orthognathic surgery. Twenty patients (10 skeletal class II, and 10 skeletal class III) who were having pre-surgical orthodontics at Liverpool University Dental Hospital were studied. The measurement of the steepness of the occlusal plane was taken as the angle between the facebow bite-fork and the horizontal arm of the articulator. This was compared with the angle of the maxillary occlusal plane to the Frankfort plane as measured on lateral cephalometry (the gold standard). The Whipmix was closest to the gold standard as it flattened the occlusal plane by only 2 degrees (P<0.05). The results of the Denar and Dentatus differed significantly from those of the cephalogram as they flattened the occlusal plane by 5 degrees and 6. 5 degrees (P<0.01), respectively. Clinicians are encouraged to verify the steepness of the occlusal plane on mounted study casts before the technician makes the model. Copyright 2000 The British Association of Oral and Maxillofacial Surgeons.

A multicenter interracial study of facial appearance. Part 2: A comparison of intraoral parameters.

PubMed

Owens, Edward G; Goodacre, Charles J; Loh, Poey Ling; Hanke, Gilberto; Okamura, Mitsunobu; Jo, Kwang-hun; Muñoz, Carlos A; Naylor, W Patrick

2002-01-01

This article compares interracial or gender differences of six intraoral dental parameters among six racial groups (African American, Caucasian, Chinese, Hispanic, Japanese, and Korean). The same 253 patients participating in part 1 were included in this portion of the study to evaluate six intraoral parameters. The data were collected and analyzed using a one-way analysis of variance, followed by the Tukey-Kramer test for honestly significant difference when statistically significant differences were found (P < .05). Women displayed significantly more gingival tissue in four of the six races, and African Americans displayed significantly more gingival tissue than any other race. Women had significantly more missing teeth than men in three of the six races studied. Japanese subjects had significantly fewer missing teeth and smaller maxillary central incisors than all other groups except Caucasians. Women had significantly narrower maxillary central incisors in three of the races. There was a significantly higher prevalence of Angle Class III relationships in Chinese subjects. The Japanese had significantly more Class II molar relationships than other races. Racial and gender differences were found in gingival tissue display, the number of missing teeth, maxillary right central incisor crown width, and Angle molar classification, but not in the amount of vertical or horizontal overlap of the anterior teeth.

Second Class Resolver: a retrospective analysis.

PubMed

D'Attilio, M; Rodolfino, D; Filippakos, A; Saccucci, M; Festa, F; Tripodi, D

2014-03-01

To evaluate the use of Second Class Resolver (SCR), a new fixed orthopaedic appliance, for the treatment of skeletal Class II malocclusion in growing subjects. Design Retrospective analysis. Forty subjects were treated with Second Class Resolver (SCR). The mean age was 8 years at the beginning of treatment and 10 years at the end of treatment. Digital cephalometric superimpositions on lateral radiographs taken at start and end of treatment were assessed. The cephalometric values were statistically analysed. Cephalometric analysis of changes during treatment shows reduction of ANB angle (mean 2°); reduction of Witts Index (mean 3 mm); reduction of Maxillo-Mandibular angle (MM) (mean 1°); reduction of SNA (angle mean 3°); reduction of gonial angle (mean 1.8°); increase of the mandibular branch length (mean 5 mm); increase of mandibular body (mean 2.9°). The Second Class Resolver can be beneficially used for the treatment of Class II malocclusion.

An automatic method for skeletal patterns classification using craniomaxillary variables on a Colombian population.

PubMed

Niño-Sandoval, Tania Camila; Guevara Perez, Sonia V; González, Fabio A; Jaque, Robinson Andrés; Infante-Contreras, Clementina

2016-04-01

The mandibular bone is an important part of the forensic facial reconstruction and it has the possibility of getting lost in skeletonized remains; for this reason, it is necessary to facilitate the identification process simulating the mandibular position only through craniomaxillary measures, for this task, different modeling techniques have been performed, but they only contemplate a straight facial profile that belong to skeletal pattern Class I, but the 24.5% corresponding to the Colombian skeletal patterns Class II and III are not taking into account, besides, craniofacial measures do not follow a parametric trend or a normal distribution. The aim of this study was to employ an automatic non-parametric method as the Support Vector Machines to classify skeletal patterns through craniomaxillary variables, in order to simulate the natural mandibular position on a contemporary Colombian sample. Lateral cephalograms (229) of Colombian young adults of both sexes were collected. Landmark coordinates protocols were used to create craniomaxillary variables. A Support Vector Machine with a linear kernel classifier model was trained on a subset of the available data and evaluated over the remaining samples. The weights of the model were used to select the 10 best variables for classification accuracy. An accuracy of 74.51% was obtained, defined by Pr-A-N, N-Pr-A, A-N-Pr, A-Te-Pr, A-Pr-Rhi, Rhi-A-Pr, Pr-A-Te, Te-Pr-A, Zm-A-Pr and PNS-A-Pr angles. The Class Precision and the Class Recall showed a correct distinction of the Class II from the Class III and vice versa. Support Vector Machines created an important model of classification of skeletal patterns using craniomaxillary variables that are not commonly used in the literature and could be applicable to the 24.5% of the contemporary Colombian sample. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

77 FR 50760 - Notice and request for comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... rehabilitation to Class II and Class III railroad infrastructure damaged by hurricanes, floods, and natural... issued by the President ( http://www.fema.gov/news/disasters.fema#sev1 ). Class II and Class III railroad...

A three-dimensional soft tissue analysis of Class III malocclusion: a case-controlled cross-sectional study.

PubMed

Johal, Ama; Chaggar, Amrit; Zou, Li Fong

2018-03-01

The present study used the optical surface laser scanning technique to compare the facial features of patients aged 8-18 years presenting with Class I and Class III incisor relationship in a case-control design. Subjects with a Class III incisor relationship, aged 8-18 years, were age and gender matched with Class I control and underwent a 3-dimensional (3-D) optical surface scan of the facial soft tissues. Landmark analysis revealed Class III subjects displayed greater mean dimensions compared to the control group most notably between the ages of 8-10 and 17-18 years in both males and females, in respect of antero-posterior (P = 0.01) and vertical (P = 0.006) facial dimensions. Surface-based analysis, revealed the greatest difference in the lower facial region, followed by the mid-face, whilst the upper face remained fairly consistent. Significant detectable differences were found in the surface facial features of developing Class III subjects.

Class III / short line system inventory to determine 286,000 lb (129,844 kg) railcar operational status in Kansas : final report.

DOT National Transportation Integrated Search

2017-08-01

The rail industrys recent shift towards larger and heavier railcars has influenced Class III/short line railroad operation and track maintenance costs. Class III railroads earn less than $38.1 million in annual revenue and generally operate first ...

Class III / short line system inventory to determine 286,000 lb (129,844 kg) railcar operational status in Kansas : technical summary.

DOT National Transportation Integrated Search

2017-08-01

The rail industrys recent shift towards larger and heavier railcars has influenced Class III/short line railroad operation and track maintenance costs. Class III railroads earn less than $38.1 million in annual revenue and generally operate first ...

49 CFR 1150.34 - Caption summary-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 8 2013-10-01 2013-10-01 false Caption summary-transactions that involve creation of Class III carriers. 1150.34 Section 1150.34 Transportation Other Regulations Relating to....34 Caption summary—transactions that involve creation of Class III carriers. The caption summary must...

49 CFR 1150.34 - Caption summary-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Caption summary-transactions that involve creation of Class III carriers. 1150.34 Section 1150.34 Transportation Other Regulations Relating to....34 Caption summary—transactions that involve creation of Class III carriers. The caption summary must...

49 CFR 1150.34 - Caption summary-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 8 2012-10-01 2012-10-01 false Caption summary-transactions that involve creation of Class III carriers. 1150.34 Section 1150.34 Transportation Other Regulations Relating to....34 Caption summary—transactions that involve creation of Class III carriers. The caption summary must...

49 CFR 1150.34 - Caption summary-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 8 2011-10-01 2011-10-01 false Caption summary-transactions that involve creation of Class III carriers. 1150.34 Section 1150.34 Transportation Other Regulations Relating to....34 Caption summary—transactions that involve creation of Class III carriers. The caption summary must...

49 CFR 1150.34 - Caption summary-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 8 2014-10-01 2014-10-01 false Caption summary-transactions that involve creation of Class III carriers. 1150.34 Section 1150.34 Transportation Other Regulations Relating to....34 Caption summary—transactions that involve creation of Class III carriers. The caption summary must...

Skeletal maturation of the cervical vertebrae: association with various types of malocclusion.

PubMed

Armond, Mônica Costa; Generoso, Rodrigo; Falci, Saulo Gabriel Moreira; Ramos-Jorge, Maria Letícia; Marques, Leandro Silva

2012-01-01

The identification of the skeletal maturation stage of the cervical vertebrae has proven an important reference for orthodontic diagnosis. The aim of the present study was to determine the association between the skeletal maturation stage of the cervical vertebrae and types of malocclusion according to the age and gender of participants. A total of 361 individuals (168 males and 193 females) between 8 and 14 years of age were selected from a convenience sample. Malocclusions were diagnosed through study models using the Angle classification. Maturation stages of the cervical vertebrae were determined using the method proposed by Hassel and Farman. Statistical analysis involved the chi-square test (p £ 0.05) and multiple logistic regression (forward stepwise procedure). Significant differences were observed between the stage of skeletal maturation of the cervical vertebrae and gender at ages 11, 12 and 14 years. Males with Class II malocclusion were twice as likely to be in Stage 1 or 2 of cervical vertebra maturation than individuals with Class I malocclusion (OR = 2.1 [CI 95%, 1.33-3.18]). There were no differences between individuals with Class I and Class III malocclusions. The association between skeletal maturation of the cervical vertebrae and type of malocclusion was significant, suggesting a skeletal component in the determination of Class II malocclusions.

Acculturation levels and personalizing orthognathic surgery for the Asian American patient.

PubMed

Sy, A A; Kim, W S; Chen, J; Shen, Y; Tao, C; Lee, J S

2016-10-01

This study was performed to investigate whether the level of acculturation among Asians living in the USA plays a significant role in their opinion of facial profiles. One hundred and ninety-eight Asian American subjects were asked to complete a pre-validated survey to measure their level of acculturation and to evaluate four sets of pictures that displayed a class II male, class II female, class III male, and class III female. Each set consisted of three lateral profile pictures: an initial unaltered photo, a picture simulating a flatter profile (orthodontic camouflage in class II; mandibular setback in class III), and a picture simulating a fuller profile (mandibular advancement in class II; maxillary advancement in class III). For the class II male, subjects who were more acculturated indicated that a flatter profile (orthodontic camouflage) was less attractive. For the class II female, higher acculturated subjects chose expansive treatment (mandibular advancement) as more aesthetic compared to the less acculturated subjects. Each of these scenarios had statistically significant odds ratios. In general, highly acculturated subjects preferred a fuller facial profile, while low acculturated subjects preferred a flatter facial profile appearance, except for the class III female profile, which did not follow this trend. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Comparison of temporomandibular joint and ramus morphology between class II and class III cases before and after bi-maxillary osteotomy.

PubMed

Iguchi, Ran; Yoshizawa, Kunio; Moroi, Akinori; Tsutsui, Takamitsu; Hotta, Asami; Hiraide, Ryota; Takayama, Akihiro; Tsunoda, Tatsuya; Saito, Yuki; Sato, Momoko; Baba, Nana; Ueki, Koichiro

2017-12-01

The purpose of this study was to compare changes in temporomandibular joint (TMJ) and ramus morphology between class II and III cases before and after sagittal split ramus osteotomy (SSRO) and Le Fort I osteotomy. The subjects were 39 patients (78 sides) who underwent bi-maxillary surgery. They consisted of 2 groups (18 class II cases and 21 class III cases), and were selected randomly from among patients who underwent surgery between 2012 and 2016. The TMJ disc tissue and joint effusion were assessed by magnetic resonance imaging (MRI) and the TMJ space, condylar height, ramus height, ramus inclination and condylar square were assessed by computed tomography (CT), pre- and post-operatively. The number of joints with anterior disc displacement in class II was significantly higher than that in class III (p < 0.0001). However, there were no significant differences between the two classes regarding ratio of joint symptoms and ratio of joint effusion pre- and post-operatively. Class II was significantly better than class III regarding reduction ratio of condylar height (p < 0.0001) and square (p = 0.0005). The study findings suggest that condylar morphology could change in both class II and III after bi-maxillary surgery. The findings of the numerical analysis also demonstrated that reduction of condylar volume occurred frequently in class II, although TMJ disc position classification did not change significantly, as previously reported. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Crown-root morphology of lower incisors in patients with class III malocclusion.

PubMed

Wang, Bo; Shen, Guofang; Fang, Bing; Zhang, Li

2012-07-01

The purpose of this study was to investigate the crown-root morphology of lower incisors in patients with class III malocclusion using cone-beam computed tomography. Cone-beam computed tomography images were analyzed from 53 adult class I patients (group 1), 37 preadolescent class III patients (group 2), and 66 adult class III patients (group 3) comprising 3 divisions (divisions 1, 2, and 3 corresponded to mild, moderate, and severe class III malocclusions). The size and crown-root angulations of lower incisors in different groups and divisions were statistically appraised with group 1 used as the control group. No significant differences were found for the size of lower incisors among different groups and divisions (P > 0.05). Compared with group 1, the crown-root angulations of lower incisors in groups 2 and 3 were significantly larger (P < 0.01), and among 3 divisions, the lower incisors of division 3 rather than divisions 2 and 3 exhibited larger crown-root angulations (P < 0.01). Attention should be paid to the enlarged crown-root angulations of lower incisors in class III patients during orthodontic and orthognathic treatment, especially in severe ones.

Comparison of psychosocial status in treatment-seeking women with class III vs. class I-II obesity.

PubMed

Wadden, Thomas A; Butryn, Meghan L; Sarwer, David B; Fabricatore, Anthony N; Crerand, Canice E; Lipschutz, Patti E; Faulconbridge, Lucy; Raper, Steven; Williams, Noel N

2006-01-01

This study compared the psychosocial status and weight loss expectations of women with extreme (class III) obesity who sought bariatric surgery with those of women with class I-II obesity who enrolled in a research study on behavioral weight control. Before treatment, all participants completed the Beck Depression Inventory-II and the Weight and Lifestyle Inventory. This latter questionnaire assesses several domains including symptoms of depression and low self-esteem, history of psychiatric complications, current stressors, and weight loss expectations. Women with class III obesity, as compared with class I-II, reported significantly more symptoms of depression. Fully 25% of women in the former group appeared to have a significant mood disorder that would benefit from treatment. As compared with women with class I-II obesity, significantly more women with class III obesity also reported a history of psychiatric complications, which included physical and sexual abuse and greater stress related to their physical health and financial/legal matters. Both groups of women had unrealistic weight loss expectations. Those who sought surgery expected to lose 47.6 +/- 9.3% of initial weight, compared with 24.8 +/- 8.7% for those who enrolled in behavioral weight control. These findings suggest that women with extreme obesity who seek bariatric surgery should be screened for psychosocial complications. Those determined to have significant psychiatric distress should be referred for behavioral or pharmacological treatment to alleviate their suffering. Long-term studies are needed to provide definitive guidance concerning the relationship between preoperative psychopathology and the outcome of bariatric surgery.

49 CFR 1150.32 - Procedures and relevant dates-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 8 2014-10-01 2014-10-01 false Procedures and relevant dates-transactions that involve creation of Class III carriers. 1150.32 Section 1150.32 Transportation Other Regulations Relating.... 10901 § 1150.32 Procedures and relevant dates—transactions that involve creation of Class III carriers...

49 CFR 1150.32 - Procedures and relevant dates-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 8 2012-10-01 2012-10-01 false Procedures and relevant dates-transactions that involve creation of Class III carriers. 1150.32 Section 1150.32 Transportation Other Regulations Relating.... 10901 § 1150.32 Procedures and relevant dates—transactions that involve creation of Class III carriers...

49 CFR 1150.32 - Procedures and relevant dates-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 8 2013-10-01 2013-10-01 false Procedures and relevant dates-transactions that involve creation of Class III carriers. 1150.32 Section 1150.32 Transportation Other Regulations Relating.... 10901 § 1150.32 Procedures and relevant dates—transactions that involve creation of Class III carriers...

49 CFR 1150.32 - Procedures and relevant dates-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 8 2011-10-01 2011-10-01 false Procedures and relevant dates-transactions that involve creation of Class III carriers. 1150.32 Section 1150.32 Transportation Other Regulations Relating.... 10901 § 1150.32 Procedures and relevant dates—transactions that involve creation of Class III carriers...

Effectiveness of laparoscopic Roux-en-Y gastric bypass on obese class I type 2 diabetes mellitus patients.

PubMed

Xu, Lu; Yin, Jun; Mikami, Dean J; Portenier, Dana D; Zhou, Xiaojun; Mao, Zhongqi

2015-01-01

Laparoscopic Roux-en-Y gastric bypass (LRYGB) can dramatically improve type 2 diabetes mellitus (T2D) in obese class II and III patients. There is increasing evidence that shows bariatric surgery can also ameliorate T2D in patients with BMI between 30 kg/m(2) and 35 kg/m(2) (obese class I). To compare the effectiveness of LRYGB on T2D in obese class I patients with that of obese class II and III T2D patients. University Hospital, China A prospective study was performed in the authors' center from March 2010 to July 2011. Forty-two consecutive obese patients were included in the study. Anthropometric and metabolism parameters were compared between obese class II and III patients and obese class I patients before and after LRYGB. No patients were lost to follow up. After 36 months, metabolic parameters significantly improved in both groups. Partial remission rates between the 2 groups at each time point (12 months, 24 months, and 36 months) were comparable. Obese class II and III patients had higher complete remission rates at 12 months and 24 months, but no difference was observed at 36 months. Both obese class II and III patients and obese class I T2D patients showed significant improvement in multiple parameters after LRYGB. Obese class II and III patients had a higher complete remission rate than obese class I patients. Standardized remission criteria are needed to make outcomes form different centers comparable. Large prospective studies are needed and long-term outcomes have to be observed to better evaluate effectiveness of LRYGB on obese class I T2D patients. Copyright © 2015 American Society for Bariatric Surgery. All rights reserved.

49 CFR 1150.33 - Information to be contained in notice-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 8 2012-10-01 2012-10-01 false Information to be contained in notice-transactions that involve creation of Class III carriers. 1150.33 Section 1150.33 Transportation Other Regulations.... 10901 § 1150.33 Information to be contained in notice—transactions that involve creation of Class III...

49 CFR 1150.33 - Information to be contained in notice-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Information to be contained in notice-transactions that involve creation of Class III carriers. 1150.33 Section 1150.33 Transportation Other Regulations.... 10901 § 1150.33 Information to be contained in notice—transactions that involve creation of Class III...

49 CFR 1150.33 - Information to be contained in notice-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 8 2011-10-01 2011-10-01 false Information to be contained in notice-transactions that involve creation of Class III carriers. 1150.33 Section 1150.33 Transportation Other Regulations.... 10901 § 1150.33 Information to be contained in notice—transactions that involve creation of Class III...

49 CFR 1150.33 - Information to be contained in notice-transactions that involve creation of Class III carriers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 8 2014-10-01 2014-10-01 false Information to be contained in notice-transactions that involve creation of Class III carriers. 1150.33 Section 1150.33 Transportation Other Regulations.... 10901 § 1150.33 Information to be contained in notice—transactions that involve creation of Class III...

40 CFR 144.21 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells.

Code of Federal Regulations, 2011 CFR

2011-07-01

... recovery and hydrocarbon storage) and III wells. 144.21 Section 144.21 Protection of Environment... hydrocarbon storage) and III wells. (a) An existing Class I, II (except enhanced recovery and hydrocarbon... decision; or (9) For Class II wells (except enhanced recovery and hydrocarbon storage), five years after...

40 CFR 144.21 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... recovery and hydrocarbon storage) and III wells. 144.21 Section 144.21 Protection of Environment... hydrocarbon storage) and III wells. (a) An existing Class I, II (except enhanced recovery and hydrocarbon... decision; or (9) For Class II wells (except enhanced recovery and hydrocarbon storage), five years after...

The Classification for Early-onset Scoliosis (C-EOS) Correlates With the Speed of Vertical Expandable Prosthetic Titanium Rib (VEPTR) Proximal Anchor Failure.

PubMed

Park, Howard Y; Matsumoto, Hiroko; Feinberg, Nicholas; Roye, David P; Kanj, Wajdi W; Betz, Randal R; Cahill, Patrick J; Glotzbecker, Michael P; Luhmann, Scott J; Garg, Sumeet; Sawyer, Jeffrey R; Smith, John T; Flynn, John M; Vitale, Michael G

2017-09-01

The Classification for Early-onset Scoliosis (C-EOS) was developed by a consortium of early-onset scoliosis (EOS) surgeons. This study aims to examine if the C-EOS classification correlates with the speed (failure/unit time) of proximal anchor failure in EOS surgery patients. A total of 106 EOS patients were retrospectively queried from an EOS database. All patients were treated with vertical expandable prosthetic titanium rib and experienced proximal anchor failure. Patients were classified by the C-EOS, which includes a term for etiology [C: Congenital (54.2%), M: Neuromuscular (32.3%), S: Syndromic (8.3%), I: Idiopathic (5.2%)], major curve angle [1: ≤20 degrees (0%), 2: 21 to 50 degrees (15.6%), 3: 51 to 90 degrees (66.7%), 4: >90 degrees (17.7%)], and kyphosis ["-": ≤20 (13.5%), "N": 21 to 50 (42.7%), "+": >50 (43.8%)]. Outcome was measured by time and number of lengthenings to failure. Analyzing C-EOS classes with >3 subjects, survival analysis demonstrates that the C-EOS discriminates low, medium, and high speed of failure. The low speed of failure group consisted of congenital/51-90/hypokyphosis (C3-) class. The medium-speed group consisted of congenital/51-90/normal and hyperkyphosis (C3N, C3+), and neuromuscular/51-90/hyperkyphosis (M3+) classes. The high-speed group consisted of neuromuscular/51-90/normal kyphosis (M3N), and neuromuscular/>90/normal and hyperkyphosis (M4N, M4+) classes. Significant differences were found in time (P<0.05) and number of expansions (P<0.05) before failure between congenital and neuromuscular classes.As isolated variables, neuromuscular etiology experienced a significantly faster time to failure compared with patients with idiopathic (P<0.001) and congenital (P=0.026) etiology. Patients with a major curve angle >90 degrees demonstrated significantly faster speed of failure compared with patients with major curve angle 21 to 50 degrees (P=0.011). The ability of the C-EOS to discriminate the speeds of failure of the various classification subgroups supports its validity and demonstrates its potential use in guiding decision making. Further experience with the C-EOS may allow more tailored treatment, and perhaps better outcomes of patients with EOS. Level III.

The Classification for Early-onset Scoliosis (C-EOS) Correlates With the Speed of Vertical Expandable Prosthetic Titanium Rib (VEPTR) Proximal Anchor Failure

PubMed Central

Park, Howard Y.; Matsumoto, Hiroko; Feinberg, Nicholas; Roye, David P.; Kanj, Wajdi W.; Betz, Randal R.; Cahill, Patrick J.; Glotzbecker, Michael P.; Luhmann, Scott J.; Garg, Sumeet; Sawyer, Jeffrey R.; Smith, John T.; Flynn, John M.; Vitale, Michael G.

2017-01-01

Background The Classification for Early-onset Scoliosis (C-EOS) was developed by a consortium of early-onset scoliosis (EOS) surgeons. This study aims to examine if the C-EOS classification correlates with the speed (failure/unit time) of proximal anchor failure in EOS surgery patients. Methods A total of 106 EOS patients were retrospectively queried from an EOS database. All patients were treated with vertical expandable prosthetic titanium rib and experienced proximal anchor failure. Patients were classified by the C-EOS, which includes a term for etiology [C: Congenital (54.2%), M: Neuromuscular (32.3%), S: Syndromic (8.3%), I: Idiopathic (5.2%)], major curve angle [1: ≤20 degrees (0%), 2: 21 to 50 degrees (15.6%), 3: 51 to 90 degrees (66.7%), 4: >90 degrees (17.7%)], and kyphosis [“−”: ≤20 (13.5%), “N”: 21 to 50 (42.7%), “+”: >50 (43.8%)]. Outcome was measured by time and number of lengthenings to failure. Results Analyzing C-EOS classes with >3 subjects, survival analysis demonstrates that the C-EOS discriminates low, medium, and high speed of failure. The low speed of failure group consisted of congenital/51-90/hypokyphosis (C3−) class. The medium-speed group consisted of congenital/51-90/normal and hyperkyphosis (C3N, C3+), and neuromuscular/51-90/hyperkyphosis (M3+) classes. The high-speed group consisted of neuromuscular/51-90/normal kyphosis (M3N), and neuromuscular/>90/normal and hyperkyphosis (M4N, M4+) classes. Significant differences were found in time (P < 0.05) and number of expansions (P < 0.05) before failure between congenital and neuromuscular classes. As isolated variables, neuromuscular etiology experienced a significantly faster time to failure compared with patients with idiopathic (P < 0.001) and congenital (P = 0.026) etiology. Patients with a major curve angle >90 degrees demonstrated significantly faster speed of failure compared with patients with major curve angle 21 to 50 degrees (P = 0.011). Conclusions The ability of the C-EOS to discriminate the speeds of failure of the various classification subgroups supports its validity and demonstrates its potential use in guiding decision making. Further experience with the C-EOS may allow more tailored treatment, and perhaps better outcomes of patients with EOS. Level of Evidence Level III. PMID:26566066

[Does elitism of school influence the smoking-related health behaviour among grammar school students?].

PubMed

Józwicki, Wojciech; Gołda, Ryszard; Domaniewska, Jolanta; Skok, Zdzisław; Jarzemski, Piotr; Przybylski, Grzegorz; Domaniewski, Jan

2009-01-01

The aim of the study was connected with smoking health behaviour estimation among public (SZP) and nonpublic (SZN) grammar school students. The analysis of 156 anonymous questionnaires was made. Questionnaires contained questions of parents' education, material situation of family, physical education, social relations with family and peers and positive or negative perception of smoking. In total trial we observed a strong positive correlation between style of smoking or number of smoked cigarettes and positive perception of smoking (r = 0.62 or r = 0.36 respectively). The latter correlated significantly with family presence of smoking (r = 0.18). Percentages of smoking students of SZP and SZN differed and amounted 22% and 18% respectively. Within I/II SZP classes the smoking depended on material position of family (r = 0.28) and positive perception of smoking (r = 0.68). Among students of III SZP classes the dependence on material situation was stronger (r = 0.49), while students of III SZN classes became to perceive smoking more positive (r = 0.82). Social relations of students of I/II SZN classes were inversely proportional to prevalence of smoking in their families. Smoking students of III SZN classes worked out much more variously in comparison with pupils of SZP. The main motivation of smoking within school students was the positive perception of smoking. The differences of smoking prevalence within both types of school probably formed in the families and observed in I/II classes pupils, vanished during the time of III class of studying. Elitism of school do not protect the student from smoking: during the time of III SZN class the smoking receives clearly positive appearance and became established. Probably existing antinicotinic school programs should much more decidedly deliver the negative appearance of health effects of smoking.

77 FR 37092 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

... Class III railroad infrastructure damaged by hurricanes, floods, and natural disasters that are located... President ( http://www.fema.gov/news/disasters.fema#sev1 ). Class II and Class III railroad infrastructure...

25 CFR 291.7 - What must the Secretary do if it has been determined that the Indian tribe is eligible to request...

Code of Federal Regulations, 2010 CFR

2010-04-01

... the Indian tribe is eligible to request Class III gaming procedures? 291.7 Section 291.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES... request Class III gaming procedures? (a) If the Secretary determines that the Indian tribe is eligible to...

40 CFR 147.650 - State-administrative program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTROL PROGRAMS Idaho § 147.650 State-administrative program—Class I, II, III, IV, and V wells. The UIC program for Class I, II, III, IV, and V wells in the State of Idaho, other than those on Indian lands, is the program administered by the Idaho Department of Water Resources, approved by EPA pursuant to...

The Populus Class III HD ZIP transcription factor POPCORONA affects cell differentiation during secondary growth of woody stems

Treesearch

Juan Du; Eriko Miura; Marcel Robischon; Ciera Martinez; Andrew Groover

2011-01-01

The developmental mechanisms regulating cell differentiation and patterning during the secondary growth of woody tissues are poorly understood. Class III HD ZIP transcription factors are evolutionarily ancient and play fundamental roles in various aspects of plant development. Here we investigate the role of a Class III HD ZIP transcription factor, ...

The early management of Class III malocclusions using protraction headgear.

PubMed

Macey-Dare, L V

2000-12-01

Class III malocclusions affect approximately 3% of Caucasians. Treatment options include; growth modification, dental camouflage and, once growth has ceased, orthognathic surgery. Originally, Class III malocclusions were thought to arise primarily from an overdevelopment of the mandible, but it is now known that maxillary retrusion contributes in up to 60% of cases. Maxillary retrusion is best treated with a combination of protraction headgear and rapid maxillary expansion, preferably before the age of 9 years. This article provides an overview of the management of skeletal Class III cases using protraction headgear with particular guidance for the general dental practitioner on when and how to treat.

Non-surgical Management of Skeletal Class III Malocclusion with Bilateral Posterior Crossbite: A Case Report.

PubMed

Kumari, Lalima; Nayan, Kamal

2016-12-01

A 16-year-old female patient with skeletal Class III malocclusion and bilateral posterior cross bite complaining of difficulty in chewing was treated orthodontically without surgery (camouflage treatment). The treatment comprised of fixed orthodontic treatment with MBT prescription (0.022˝×0.028˝ slot) using quad helix appliance for bilateral expansion of maxillary arch and Class III elastics for occlusal correction. Post-treatment records showed normal overbite and overjet with acceptable occlusion. So with this treatment strategy of expanding the maxillary arch using a quad helix appliance and use of Class III elastics, we achieved a good result with optimal occlusion.

Predicted versus executed surgical orthognathic treatment.

PubMed

Falter, B; Schepers, S; Vrielinck, L; Lambrichts, I; Politis, C

2013-10-01

This study aimed to analyse combined surgical-orthodontic treatment plans, compare them with the actual surgery performed, and define factors resulting in changes of the original plan during orthodontic pre-surgical preparation. The clinical files of 312 orthognathic surgery patients, operated between January 2008 and December 2010, were retrospectively reviewed. Of these 312 patients, 129 had a bimaxillary operation. One hundred sixty patients had osteotomy of the lower jaw only and 23 had osteotomy of the upper jaw only. Factors analysed in the study include Angle Class malocclusion, patient sex, and age. Lip-to-incisor relationship, overjet, overbite and midline deviations of the upper and lower jaw were recorded. Effects of surgical assisted rapid palatal expansion (SARPE) on the eventual surgery were also investigated. Reasons for changing the original treatment plan at the time of the finished pre-surgical-orthodontic alignment were analysed. The original treatment plan was changed in 42 of the 312 patients (13.5%). Changes occurred generally in case of a larger interval between set-up of the first treatment plan and the eventual operation (average 22.4 versus 16.4 months for patients with changed versus unchanged treatment plan, respectively). All Class I patients had surgery performed as planned. Class III patients had a significantly higher rate of altered treatment plan (27.3%) than Class II patients (7.6%). More men (52.4%) saw their treatment plan changed, although there were more women than men in the study population (59.6 versus 40.4%). One in seven patients (13.5%) had a different operation than was planned at the start of treatment. Class III patients with small overjet and overbite commonly have a treatment plan for a monomaxillary operation that, after decompensation, needs to be adapted to a bimaxillary operation. Copyright © 2012 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Condition-specific Quality of Life Assessment at Each Stage of Class III Surgical Orthodontic Treatment -A Prospective Study.

PubMed

Tachiki, Chie; Nishii, Yasushi; Takaki, Takashi; Sueishi, Kenji

2018-01-01

Surgical orthodontic treatment has been reported to improve oral health-related quality of life (OHRQL). Such treatment comprises three stages: pre-surgical orthodontic treatment; orthognathic surgery; and post-surgical orthodontic treatment. Most studies have focused on change in OHRQL between before and after surgery. However, it is also necessary to evaluate OHRQL at the pre-surgical orthodontic treatment stage, as it may be negatively affected by dental decompensation compared with at pre-treatment. The purpose of this prospective study was to investigate the influence of surgical orthodontic treatment on QOL by assessing change in condition-specific QOL at each stage of treatment in skeletal class III cases. Twenty skeletal class III patients requiring surgical orthodontic treatment were enrolled in the study. Each patient completed the Orthognathic Quality of Life Questionnaire (OQLQ), which was developed for patients with dentofacial deformity. Its items are grouped into 4 domains: "social aspects of dentofacial deformity"; "facial esthetics"; "oral function"; and "awareness of dentofacial esthetics". The questionnaire was completed at the pre-treatment, pre-surgical orthodontic treatment, and post-surgical orthodontic treatment stages. The results revealed a significant worsening in scores between at pre-treatment and pre-surgical orthodontic treatment in the domains of facial esthetics and oral function (p<0.01), and between at pre-surgical orthodontic and post-surgical orthodontic treatment in all domains except awareness of dentofacial esthetics (p<0.05, p<0.01). A significant correlation was observed between a negative change in overjet and worsening OQLQ scores at the pre-surgical orthodontic treatment stage. Significant correlations were also observed between improvement in upper and lower lip difference, soft tissue pogonion protrusion, and ANB angle and improvement in OQLQ scores at the post-surgical orthodontic treatment stage. These results indicate that morphologic change influences OHRQL in patients undergoing surgical orthodontic treatment not only after surgery, but also during pre-surgical orthodontic treatment.

49 CFR 179.500-6 - Heat treatment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-6 Heat treatment. (a... normalizing and tempering for Class I, Class II and Class III steel or oil quenching and tempering for Class III steel. Tempering temperatures shall not be less than 1000 °F. Heat treatment of alternate steels...

49 CFR 179.500-6 - Heat treatment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-6 Heat treatment. (a... normalizing and tempering for Class I, Class II and Class III steel or oil quenching and tempering for Class III steel. Tempering temperatures shall not be less than 1000 °F. Heat treatment of alternate steels...

49 CFR 179.500-6 - Heat treatment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-6 Heat treatment. (a... normalizing and tempering for Class I, Class II and Class III steel or oil quenching and tempering for Class III steel. Tempering temperatures shall not be less than 1000 °F. Heat treatment of alternate steels...

49 CFR 179.500-6 - Heat treatment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-6 Heat treatment. (a... normalizing and tempering for Class I, Class II and Class III steel or oil quenching and tempering for Class III steel. Tempering temperatures shall not be less than 1000 °F. Heat treatment of alternate steels...

Emission Patterns of Solar Type III Radio Bursts: Stereoscopic Observations

NASA Technical Reports Server (NTRS)

Thejappa, G.; MacDowall, R.; Bergamo, M.

2012-01-01

Simultaneous observations of solar type III radio bursts obtained by the STEREO A, B, and WIND spacecraft at low frequencies from different vantage points in the ecliptic plane are used to determine their directivity. The heliolongitudes of the sources of these bursts, estimated at different frequencies by assuming that they are located on the Parker spiral magnetic field lines emerging from the associated active regions into the spherically symmetric solar atmosphere, and the heliolongitudes of the spacecraft are used to estimate the viewing angle, which is the angle between the direction of the magnetic field at the source and the line connecting the source to the spacecraft. The normalized peak intensities at each spacecraft Rj = Ij /[Sigma]Ij (the subscript j corresponds to the spacecraft STEREO A, B, and WIND), which are defined as the directivity factors are determined using the time profiles of the type III bursts. It is shown that the distribution of the viewing angles divides the type III bursts into: (1) bursts emitting into a very narrow cone centered around the tangent to the magnetic field with angular width of approximately 2 deg and (2) bursts emitting into a wider cone with angular width spanning from [approx] -100 deg to approximately 100 deg. The plots of the directivity factors versus the viewing angles of the sources from all three spacecraft indicate that the type III emissions are very intense along the tangent to the spiral magnetic field lines at the source, and steadily fall as the viewing angles increase to higher values. The comparison of these emission patterns with the computed distributions of the ray trajectories indicate that the intense bursts visible in a narrow range of angles around the magnetic field directions probably are emitted in the fundamental mode, whereas the relatively weaker bursts visible to a wide range of angles are probably emitted in the harmonic mode.

19 CFR Appendix to Part 146 - Guidelines for Determining Producibility and Relative Values for Oil Refinery Zones

Code of Federal Regulations, 2012 CFR

2012-04-01

... × .20). Likewise, the class IV crude oil could produce aviation gasoline in an amount up to 8,500 pounds... Class III PF Crude 35,000 24,500 31,850 14,000 31,150 10,150 Class III D Crude 20,000 14,000 18,200 8,000 17,800 5,800 Class III NPF Crude 20,000 14,000 18,200 8,000 17,800 5,800 Feedstock factors are...

19 CFR Appendix to Part 146 - Guidelines for Determining Producibility and Relative Values for Oil Refinery Zones

Code of Federal Regulations, 2014 CFR

2014-04-01

... × .20). Likewise, the class IV crude oil could produce aviation gasoline in an amount up to 8,500 pounds... Class III PF Crude 35,000 24,500 31,850 14,000 31,150 10,150 Class III D Crude 20,000 14,000 18,200 8,000 17,800 5,800 Class III NPF Crude 20,000 14,000 18,200 8,000 17,800 5,800 Feedstock factors are...

Evidence report: Genetic and metabolic testing on children with global developmental delay: report of the Quality Standards Subcommittee of the American Academy of Neurology and the Practice Committee of the Child Neurology Society.

PubMed

Michelson, D J; Shevell, M I; Sherr, E H; Moeschler, J B; Gropman, A L; Ashwal, S

2011-10-25

To systematically review the evidence concerning the diagnostic yield of genetic and metabolic evaluation of children with global developmental delay or intellectual disability (GDD/ID). Relevant literature was reviewed, abstracted, and classified according to the 4-tiered American Academy of Neurology classification of evidence scheme. In patients with GDD/ID, microarray testing is diagnostic on average in 7.8% (Class III), G-banded karyotyping is abnormal in at least 4% (Class II and III), and subtelomeric fluorescence in situ hybridization is positive in 3.5% (Class I, II, and III). Testing for X-linked ID genes has a yield of up to 42% in males with an appropriate family history (Class III). FMR1 testing shows full expansion in at least 2% of patients with mild to moderate GDD/ID (Class II and III), and MeCP2 testing is diagnostic in 1.5% of females with moderate to severe GDD/ID (Class III). Tests for metabolic disorders have a yield of up to 5%, and tests for congenital disorders of glycosylation and cerebral creatine disorders have yields of up to 2.8% (Class III). Several genetic and metabolic screening tests have been shown to have a better than 1% diagnostic yield in selected populations of children with GDD/ID. These values should be among the many factors considered in planning the laboratory evaluation of such children.

46 CFR 174.255 - Restricted service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... heel at which downflooding would occur, whichever angle is less. (iii) A residual righting energy of at... the angle of heel at which downflooding would occur, whichever angle is less. (2) For this section...

46 CFR 174.255 - Restricted service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... heel at which downflooding would occur, whichever angle is less. (iii) A residual righting energy of at... the angle of heel at which downflooding would occur, whichever angle is less. (2) For this section...

Use of multi-frequency, multi-polarization, multi-angle airborne radars for class discrimination in a southern temperature forest

NASA Technical Reports Server (NTRS)

Mehta, N. C.

1984-01-01

The utility of radar scatterometers for discrimination and characterization of natural vegetation was investigated. Backscatter measurements were acquired with airborne multi-frequency, multi-polarization, multi-angle radar scatterometers over a test site in a southern temperate forest. Separability between ground cover classes was studied using a two-class separability measure. Very good separability is achieved between most classes. Longer wavelength is useful in separating trees from non-tree classes, while shorter wavelength and cross polarization are helpful for discrimination among tree classes. Using the maximum likelihood classifier, 50% overall classification accuracy is achieved using a single, short-wavelength scatterometer channel. Addition of multiple incidence angles and another radar band improves classification accuracy by 20% and 50%, respectively, over the single channel accuracy. Incorporation of a third radar band seems redundant for vegetation classification. Vertical transmit polarization is critically important for all classes.

TGF-{beta}-stimulated aberrant expression of class III {beta}-tubulin via the ERK signaling pathway in cultured retinal pigment epithelial cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, Eun Jee; Chun, Ji Na; Jung, Sun-Ah

2011-11-18

Highlights: Black-Right-Pointing-Pointer TGF-{beta} induces aberrant expression of {beta}III in RPE cells via the ERK pathway. Black-Right-Pointing-Pointer TGF-{beta} increases O-GlcNAc modification of {beta}III in RPE cells. Black-Right-Pointing-Pointer Mature RPE cells have the capacity to express a neuron-associated gene by TGF-{beta}. -- Abstract: The class III {beta}-tubulin isotype ({beta}{sub III}) is expressed exclusively by neurons within the normal human retina and is not present in normal retinal pigment epithelial (RPE) cells in situ or in the early phase of primary cultures. However, aberrant expression of class III {beta}-tubulin has been observed in passaged RPE cells and RPE cells with dedifferentiated morphology inmore » pathologic epiretinal membranes from idiopathic macular pucker, proliferative vitreoretinopathy (PVR) and proliferative diabetic retinopathy (PDR). Transforming growth factor-{beta} (TGF-{beta}) has been implicated in dedifferentiation of RPE cells and has a critical role in the development of proliferative vitreoretinal diseases. Here, we investigated the potential effects of TGF-{beta} on the aberrant expression of class III {beta}-tubulin and the intracellular signaling pathway mediating these changes. TGF-{beta}-induced aberrant expression and O-linked-{beta}-N-acetylglucosamine (O-GlcNac) modification of class III {beta}-tubulin in cultured RPE cells as determined using Western blotting, RT-PCR and immunocytochemistry. TGF-{beta} also stimulated phosphorylation of ERK. TGF-{beta}-induced aberrant expression of class III {beta}-tubulin was significantly reduced by pretreatment with U0126, an inhibitor of ERK phosphorylation. Our findings indicate that TGF-{beta} stimulated aberrant expression of class III {beta}-tubulin via activation of the ERK signaling pathway. These data demonstrate that mature RPE cells have the capacity to express a neuron-associated gene in response to TGF-{beta} stimulation and provide useful information towards understanding the pathogenesis of proliferative vitreoretinal diseases.« less

Assessment: transcranial Doppler ultrasonography: report of the Therapeutics and Technology Assessment Subcommittee of the American Academy of Neurology.

PubMed

Sloan, M A; Alexandrov, A V; Tegeler, C H; Spencer, M P; Caplan, L R; Feldmann, E; Wechsler, L R; Newell, D W; Gomez, C R; Babikian, V L; Lefkowitz, D; Goldman, R S; Armon, C; Hsu, C Y; Goodin, D S

2004-05-11

To review the use of transcranial Doppler ultrasonography (TCD) and transcranial color-coded sonography (TCCS) for diagnosis. The authors searched the literature for evidence of 1) if TCD provides useful information in specific clinical settings; 2) if using this information improves clinical decision making, as reflected by improved patient outcomes; and 3) if TCD is preferable to other diagnostic tests in these clinical situations. TCD is of established value in the screening of children aged 2 to 16 years with sickle cell disease for stroke risk (Type A, Class I) and the detection and monitoring of angiographic vasospasm after spontaneous subarachnoid hemorrhage (Type A, Class I to II). TCD and TCCS provide important information and may have value for detection of intracranial steno-occlusive disease (Type B, Class II to III), vasomotor reactivity testing (Type B, Class II to III), detection of cerebral circulatory arrest/brain death (Type A, Class II), monitoring carotid endarterectomy (Type B, Class II to III), monitoring cerebral thrombolysis (Type B, Class II to III), and monitoring coronary artery bypass graft operations (Type B to C, Class II to III). Contrast-enhanced TCD/TCCS can also provide useful information in right-to-left cardiac/extracardiac shunts (Type A, Class II), intracranial occlusive disease (Type B, Class II to IV), and hemorrhagic cerebrovascular disease (Type B, Class II to IV), although other techniques may be preferable in these settings.

40 CFR 147.2200 - State-administered program-Class I, III, IV, and V wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the in situ combustion of coal are regulated by the Rail Road Commission of Texas under a separate UIC... program for Class I, III, IV, and V wells in the State of Texas, except for those wells on Indian lands... (SDWA). Notice of the original approval for Class I, III, IV, and V wells was published in the Federal...

40 CFR 147.2200 - State-administered program-Class I, III, IV, and V wells.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the in situ combustion of coal are regulated by the Rail Road Commission of Texas under a separate UIC... program for Class I, III, IV, and V wells in the State of Texas, except for those wells on Indian lands... (SDWA). Notice of the original approval for Class I, III, IV, and V wells was published in the Federal...

Prevalence of class-I, class-II and class-III obesity in Australian adults between 1995 and 2011-12.

PubMed

Keating, Catherine; Backholer, Kathryn; Gearon, Emma; Stevenson, Christopher; Swinburn, Boyd; Moodie, Marj; Carter, Rob; Peeters, Anna

2015-01-01

To compare the prevalence of class-I, II and III obesity in Australian adults between 1995, 2007-08 and 2011-12. Prevalence data for adults (aged 18+ years) were sourced from customised data from the nationally representative National Nutrition Survey (1995), the National Health Survey (2007-08), and the Australian Health Survey (2011-12) conducted by the Australian Bureau of Statistics. Obesity classifications were based on measured height and weight (class-I body mass index: 30.0-34.9 kg/m(2), class-II: 35.0-39.9 kg/m(2) and class-III: ≥ 40.0 kg/m(2)). Severe obesity was defined as class-II or class-III obesity. Between 1995 and 2011-12, the prevalence of obesity (all classes combined) increased from 19.1% to 27.2%. During this 17 year period, relative increases in class I, II and III obesity were 1.3, 1.7 and 2.2-fold respectively. In 2011-12, the prevalence of class I, II and III obesity was 19.4, 5.9 and 2.0 per cent respectively in men, and 16.1, 6.9 and 4.2 per cent respectively in women. One in every ten people was severely obese, increasing from one in twenty in 1995, and women were disproportionally represented in this population. Obesity prevalence increased with increasing levels of area-level socioeconomic disadvantage, particularly for the more severely obese classes. Severe obesity affected 6.2% and 13.4% in the least and most disadvantaged quintiles respectively. Over the last two decades, there have been substantial increases in the prevalence of obesity, particularly the more severe levels of obesity. This study highlights high risk groups who warrant targeted weight gain prevention interventions. Copyright © 2015 Asia Oceania Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Yifeng; Li, Bin; Prakash, Divya

Two subtypes of class III anaerobic ribonucleotide reductases (RNRs) studied so far couple the reduction of ribonucleotides to the oxidation of formate, or the oxidation of NADPH via thioredoxin and thioredoxin reductase. Certain methanogenic archaea contain a phylogenetically distinct third subtype of class III RNR, with distinct active-site residues. Here we report the cloning and recombinant expression of the Methanosarcina barkeri class III RNR and show that the electrons required for ribonucleotide reduction can be delivered by a [4Fe-4S] protein ferredoxin disulfide reductase, and a conserved thioredoxin-like protein NrdH present in the RNR operon. The diversity of class III RNRsmore » reflects the diversity of electron carriers used in anaerobic metabolism« less

Evaluation of the appropriateness and outcome of in-hospital telemetry monitoring.

PubMed

Fålun, Nina; Nordrehaug, Jan Erik; Hoff, Per Ivar; Langørgen, Jørund; Moons, Philip; Norekvål, Tone M

2013-10-15

The American Heart Association classifies monitored patients into 3 categories. The aims of this study were to (1) investigate how patients are assigned according to the American Heart Association classification, (2) determine the number and type of arrhythmic events experienced by these patients, and (3) describe subsequent changes in management. A prospective observational study design was used. All patients assigned to telemetry during a 3-month period were consecutively enrolled in our study. Data were collected 24/7. Only arrhythmias that might require a change in management were recorded. Monitor watchers at the central monitoring station completed a standard data sheet assessing 64 variables. These data, as well as medical records, were reviewed by the investigator. Overall, 1,194 patients were included. Eighteen percent of the patients were assigned to American Heart Association class I (monitoring indicated), 71% to class II (monitoring may be of benefit), and 11% to class III (monitoring not indicated). The overall arrhythmia event rate was 33%. Forty-three percent of class I patients, 28% of class II patients, and 47% of class III patients experienced arrhythmia events. Change in management occurred in 25% of class I patients, 14% of class II patients, and 29% of class III patients. Although the number of class III indications should have been reduced, nearly 1/2 of class III patients experienced arrhythmia events and 1/3 of them received management changes. This outcome challenges existing guidelines. In conclusion, most patients in this study were monitored appropriately, according to class I and II indications. Copyright © 2013 Elsevier Inc. All rights reserved.

Resection of Grade III cranial horn tears of the equine medial meniscus alter the contact forces on medial tibial condyle at full extension: an in-vitro cadaveric study.

PubMed

Fowlie, Jennifer; Arnoczky, Steven; Lavagnino, Michael; Maerz, Tristan; Stick, John

2011-12-01

To evaluate the magnitude and distribution of joint contact pressure on the medial tibial condyle after grade III cranial horn tears of the medial meniscus. Experimental study. Cadaveric equine stifles (n = 6). Cadaveric stifles were mounted in a materials testing system and electronic pressure sensors were placed between the medial tibial condyle and medial meniscus. Specimens were loaded parallel to the longitudinal axis of the tibia to 1800 N at 130°, 140°, 150°, and 160° stifle angle. Peak pressure and contact area were recorded from the contact maps. Testing was repeated after surgical creation of a grade III cranial horn tear of the medial meniscus, and after resection of the simulated tear. In the intact specimens, a significantly smaller contact area was observed at 160° compared with the other angles (P < .05). Creation of a grade III cranial horn tear in the medial meniscus did not significantly alter the pressure or contact area measurements at any stifle angle compared with intact specimens (P > .05). Resection of the tear resulted in significantly higher peak pressures in the central region of the medial tibial condyle at a stifle angle of 160° relative to the intact (P = .026) and torn (P = .012) specimens. Resection of grade III cranial horn tears in the medial meniscus resulted in a central focal region of increased pressure on the medial tibial condyle at 160° stifle angle. © Copyright 2011 by The American College of Veterinary Surgeons.

Craniofacial bone abnormalities and malocclusion in individuals with sickle cell anemia: a critical review of the literature

PubMed Central

Costa, Cyrene Piazera Silva; de Carvalho, Halinna Larissa Cruz Correia; Thomaz, Erika Bárbara Abreu Fonseca; Sousa, Soraia de Fátima Carvalho

2012-01-01

This study aims to critically review the literature in respect to craniofacial bone abnormalities and malocclusion in sickle cell anemia individuals. The Bireme and Pubmed electronic databases were searched using the following keywords: malocclusion, maxillofacial abnormalities, and Angle Class I, Class II and lass III malocclusions combined with sickle cell anemia. The search was limited to publications in English, Spanish or Portuguese with review articles and clinical cases being excluded from this study. Ten scientific publications were identified, of which three were not included as they were review articles. There was a consistent observation of orthodontic and orthopedic variations associated with sickle cell anemia, especially maxillary protrusions. However, convenience sampling, sometimes without any control group, and the lack of estimates of association and hypotheses testing undermined the possibility of causal inferences. It was concluded that despite the high frequency of craniofacial bone abnormalities and malocclusion among patients with sickle cell anemia, there is insufficient scientific proof that this disease causes malocclusion PMID:23049386

Assessing the influence of lower facial profile convexity on perceived attractiveness in the orthognathic patient, clinician, and layperson.

PubMed

Naini, Farhad B; Donaldson, Ana Nora A; McDonald, Fraser; Cobourne, Martyn T

2012-09-01

The aim was a quantitative evaluation of how the severity of lower facial profile convexity influences perceived attractiveness. The lower facial profile of an idealized image was altered incrementally between 14° to -16°. Images were rated on a Likert scale by orthognathic patients, laypeople, and clinicians. Attractiveness ratings were greater for straight profiles in relation to convex/concave, with no significant difference between convex and concave profiles. Ratings decreased by 0.23 of a level for every degree increase in the convexity angle. Class II/III patients gave significantly reduced ratings of attractiveness and had greater desire for surgery than class I. A straight profile is perceived as most attractive and greater degrees of convexity or concavity deemed progressively less attractive, but a range of 10° to -12° may be deemed acceptable; beyond these values surgical correction is desired. Patients are most critical, and clinicians are more critical than laypeople. Copyright © 2012 Elsevier Inc. All rights reserved.

78 FR 37998 - Electronic One Touch Bingo System

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... decision regarding the classification of server based electronic bingo system games that can be played... Class II or Class III game. DATES: The agency must receive comments on or before August 26, 2013... from the regulated community regarding the status of one touch bingo as a Class II or a Class III game...

Active Planning, Sensing and Recognition Using a Resource-Constrained Discriminant POMDP

DTIC Science & Technology

2014-06-28

classes of military vehicles, with sample images shown in Fig. 1. The vehicles were captured from various angles. 4785 images with depression angles 17...and 30◦ are used for training, and 4351 images with depression angles 15◦ and 45◦ are used for testing. The azimuth angles are quantized into 12...selection by collecting the engine sounds for the 8 vehicle classes from the Youtube . The sounds are attenuated differently in 6 view directions

76 FR 71600 - Renewal of Agency Information Collection for Class III Tribal-State Gaming Compact Process...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-18

... Process. The information collection is currently authorized by OMB Control Number 1076-0172, which expires... guarantee that we will be able to do so. III. Data OMB Control Number: 1076-0172. Title: Class III Tribal...

Effect of Class III bone anchor treatment on airway.

PubMed

Nguyen, Tung; De Clerck, Hugo; Wilson, Michael; Golden, Brent

2015-07-01

To compare airway volumes and minimum cross-section area changes of Class III patients treated with bone-anchored maxillary protraction (BAMP) versus untreated Class III controls. Twenty-eight consecutive skeletal Class III patients between the ages of 10 and 14 years (mean age, 11.9 years) were treated using Class III intermaxillary elastics and bilateral miniplates (two in the infra-zygomatic crests of the maxilla and two in the anterior mandible). The subjects had cone beam computed tomographs (CBCTs) taken before initial loading (T1) and 1 year out (T2). Twenty-eight untreated Class III patients (mean age, 12.4 years) had CBCTs taken and cephalograms generated. The airway volumes and minimum cross-sectional area measurements were performed using Dolphin Imaging 11.7 3D software. The superior border of the airway was defined by a plane that passes through the posterior nasal spine and basion, while the inferior border included the base of the epiglottis to the lower border of C3. From T1 to T2, airway volume from BAMP-treated subjects showed a statistically significant increase (1499.64 mm(3)). The area in the most constricted section of the airway (choke point) increased slightly (15.44 mm(2)). The airway volume of BAMP patients at T2 was 14136.61 mm(3), compared with 14432.98 mm(3) in untreated Class III subjects. Intraexaminer correlation coefficients values and 95% confidence interval values were all greater than .90, showing a high degree of reliability of the measurements. BAMP treatment did not hinder the development of the oropharynx.

Camouflage treatment of skeletal class III malocclusion with asymmetry using a bone-borne rapid maxillary expander.

PubMed

Seo, Yu-Jin; Chung, Kyu-Rhim; Kim, Seong-Hun; Nelson, Gerald

2015-03-01

This case report presents the successful use of palatal mini-implants for rapid maxillary expansion and mandibular distalization in a skeletal Class III malocclusion. The patient was a 13-year-old girl with the chief complaint of facial asymmetry and a protruded chin. Camouflage orthodontic treatment was chosen, acknowledging the possibility of need for orthognathic surgery after completion of her growth. A bone-borne rapid expander (BBRME) was used to correct the transverse discrepancy and was then used as indirect anchorage for distalization of the lower dentition with Class III elastics. As a result, a Class I occlusion with favorable inclination of the upper teeth was achieved without any adverse effects. The total treatment period was 25 months. Therefore, BBRME can be considered an alternative treatment in skeletal Class III malocclusion.

Class III obesity is a risk factor for the development of acute-on-chronic liver failure in patients with decompensated cirrhosis.

PubMed

Sundaram, Vinay; Jalan, Rajiv; Ahn, Joseph C; Charlton, Michael R; Goldberg, David S; Karvellas, Constantine J; Noureddin, Mazen; Wong, Robert J

2018-04-28

Acute-on-chronic liver failure (ACLF) is a syndrome of systemic inflammation and organ failures. Obesity, also characterized by chronic inflammation, is a risk factor among patients with cirrhosis for decompensation, infection, and mortality. Our aim was to test the hypothesis that obesity predisposes patients with decompensated cirrhosis to the development of ACLF. We examined the United Network for Organ Sharing (UNOS) database, from 2005-2016, characterizing patients at wait-listing as non-obese (body mass index [BMI] <30), obese class I-II (BMI 30-39.9) and obese class III (BMI ≥40). ACLF was determined based on the CANONIC study definition. We used Cox proportional hazards regression to assess the association between obesity and ACLF development at liver transplantation (LT). We confirmed our findings using the Nationwide Inpatient Sample (NIS), years 2009-2013, using validated diagnostic coding algorithms to identify obesity, hepatic decompensation and ACLF. Logistic regression evaluated the association between obesity and ACLF occurrence. Among 387,884 patient records with decompensated cirrhosis, 116,704 (30.1%) were identified as having ACLF in both databases. Multivariable modeling from the UNOS database revealed class III obesity to be an independent risk factor for ACLF at LT (hazard ratio 1.24; 95% CI 1.09-1.41; p <0.001). This finding was confirmed using the NIS (odds ratio 1.30; 95% CI 1.25-1.35; p <0.001). Regarding specific organ failures, analysis of both registries demonstrated patients with class I-II and class III obesity had a greater prevalence of renal failure. Class III obesity is a newly identified risk factor for ACLF development in patients with decompensated cirrhosis. Obese patients have a particularly high prevalence of renal failure as a component of ACLF. These findings have important implications regarding stratifying risk and preventing the occurrence of ACLF. In this study, we identify that among patients with decompensated cirrhosis, class III obesity (severe/morbid obesity) is a modifiable risk factor for the development of acute-on-chronic liver failure (ACLF). We further demonstrate that regarding the specific organ failures associated with ACLF, renal failure is significantly more prevalent in obese patients, particularly those with class III obesity. These findings underscore the importance of weight management in cirrhosis, to reduce the risk of ACLF. Patients with class III obesity should be monitored closely for the development of renal failure. Copyright © 2018 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.

Pathognomonic features of Angle's Class II division 2 malocclusion: A comparative cephalometric and arch width study

PubMed Central

Prasad, Singamsetty E.R.V.; Indukuri, Ravikishore Reddy; Singh, Rupesh; Nooney, Anitha; Palagiri, Firoz Babu; Narayana, Veera

2014-01-01

Background: A thorough knowledge of the salient features of malocclusion helps the clinician in arriving at a proper diagnosis and treatment plan, and also to predict the prognosis, prior to the onset of treatment process. Among the four classes of Angle's classification of malocclusion, Class II division 2 occurs with the least frequency. There is still continuing debate in the literature whether the Class II division 2 patients ascribe the pathognomonic skeletal and dental features. Aim of the study: The aim of this study is to describe the unique features of Angle's Class II division 2 malocclusion to differentiate it from Angle's Class II division 1 malocclusion. Materials and Methods: A total of 582 pre-treatment records (study models and cephalograms), with the age of patients ranging from 15 to 22 years, were obtained from the hospital records of Vishnu Dental College, Bhimavaram and Geetam's Dental College, Visakhapatnam. Out of these, 11 pre-treatment records were excluded because of lack of clarity. In the rest of the sample, 283 were Class II division 1 and 288 were Class II division 2. The lateral cephalograms were analyzed by using digiceph and the arch width analysis was done based on the anatomical points described by Staley et al. and Sergl et al. Results: An intergroup evaluation was done by using unpaired Student's “t” test. The skeletal vertical parameters, dental parameters, and the maxillary arch width parameters revealed a statistically significant difference between the two groups of malocclusion. Conclusion: Angle's Class II division 2 malocclusion has a pronounced horizontal growth pattern with decreased lower anterior facial height, retroclined upper anteriors, and significantly increased maxillary arch width parameters. PMID:25558449

Predictors of favorable soft tissue profile outcomes following Class II Twin-block treatment.

PubMed

Kim, Ji-Eun; Mah, Su-Jung; Kim, Tae-Woo; Kim, Su-Jung; Park, Ki-Ho; Kang, Yoon-Goo

2018-01-01

The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. An independent t -test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment.

Relationship between the curve of Spee and craniofacial variables: A regression analysis.

PubMed

Halimi, Abdelali; Benyahia, Hicham; Azeroual, Mohamed-Faouzi; Bahije, Loubna; Zaoui, Fatima

2018-06-01

The aim of this regression analysis was to identify the determining factors, which impact the curve of Spee during its genesis, its therapeutic reconstruction, and its stability, within a continuously evolving craniofacial morphology throughout life. We selected a total of 107 patients, according to the inclusion criteria. A morphological and functional clinical examination was performed for each patient: plaster models, tracing of the curve of Spee, crowding, Angle's classification, overjet and overbite were thus recorded. Then, we made a cephalometric analysis based on the standardized lateral cephalograms. In the sagittal dimension, we measured the values of angles ANB, SNA, SNB, SND, I/i; and the following distances: AoBo, I/NA, i/NB, SE and SL. In the vertical dimension, we measured the values of angles FMA, GoGn/SN, the occlusal plane, and the following distances: SAr, ArD, Ar/Con, Con/Gn, GoPo, HFP, HFA and IF. The statistical analysis was performed using the SPSS software with a significance level of 0.05. Our sample including 107 subjects was composed of 77 female patients (71.3%) and 30 male patients (27.8%) 7 hypodivergent patients (6.5%), 56 hyperdivergent patients (52.3%) and 44 normodivergent patients (41.1%). Patients' mean age was 19.35±5.95 years. The hypodivergent patients presented more pronounced curves of Spee compared to the normodivergent and the hyperdivergent populations; patients in skeletal Class I presented less pronounced curves of Spee compared to patients in skeletal Class II and Class III. These differences were non significant (P>0.05). The curve of Spee was positively and moderately correlated with Angle's classification, overjet, overbite, sellion-articulare distance, and breathing type (P<0.05). We found no correlation between age, gender and the other parameters included in the study with the curve of Spee (P>0.05). Seventy five percent (75%) of the hyperdivergent patients with an oral breathing presented an overbite of 3mm, which is quite excessive given the characteristics often admitted for this typology; this parameter could explain the overbite observed in the hyperdivergent population included in this study. For the multivariate analysis, the overbite and the sellion-articulare distance remained independently related to the curve of Spee according to the breathing type, Angle's classification, and overjet. This regression model explains 21.4% of the changes in the curve of Spee. Copyright © 2018. Published by Elsevier Masson SAS.

Predicting motor outcomes with 3 month prone hip angles in premature infants.

PubMed

Shehee, Lindsey; Coker-Bolt, Patty; Barbour, Andrew; Moss, Hunter; Brown, Truman; Jenkins, Dorothea

2016-09-02

This study used kinematic analysis to identify a reliable and rapid assessment method for abnormal patterns of motor development in preterm infants. In a retrospective analysis, we examined video of n= 35 preterm infants at 3mo corrected age (CA) who had concurrent Test of Infant Motor Performance (TIMP) scores. Hyperflexion at the hip produces common gait anomalies seen in children with CP, therefore we analyzed hip angle in the prone head lift position at 3 months CA. Magnetic Resonance Spectroscopy (MRS) was performed at term equivalent (n= 23) and Bayley-III neurodevelopmental tests were performed at 1 year (n= 28). We correlated hip angles with TIMP and Bayley-III scores, and MRS neuronal metabolites. Hip angle positively correlated with TIMP at 3 months (r= 0.642, p≤ 0.001), but not with Bayley-III at 1 year (r= 0.122, p= 0.529). Hip angle correlated negatively with myo-inositol (mI) ratios in frontal white matter tracts (mI/Cr r= -0.520, p= 0.011). These results suggest prone hip angle may be a quantitative proxy for the 42-item TIMP at 3 months, and that hypertonicity in the hip flexor musculature is a manifestation of white matter metabolic abnormalities (elevated mI ratios) that may indicate occult white matter injury.

Maternal and neonatal outcomes among obese women with weight gain below the new Institute of Medicine recommendations.

PubMed

Blomberg, Marie

2011-05-01

To estimate whether weight loss or low gestational weight gain in class I-III obese women is associated with adverse maternal and neonatal outcomes compared with gestational weight gain within the new Institute of Medicine recommendations. This was a population-based cohort study, which included 32,991 obesity class I, 10,068 obesity class II, and 3,536 obesity class III women who were divided into four gestational weight gain categories. Women with low (0-4.9 kg) or no gestational weight gain were compared with women gaining the recommended 5-9 kg concerning obstetric and neonatal outcome after suitable adjustments. Women in obesity class III who lost weight during pregnancy had a decreased risk of cesarean delivery (24.4%; odds ratio [OR] 0.77, 95% confidence interval [CI] 0.60-0.99), large-for-gestational-age births (11.2%, OR 0.64, 95% CI 0.46-0.90), and no significantly increased risk for pre-eclampsia, excessive bleeding during delivery, instrumental delivery, low Apgar score, or fetal distress compared with obese (class III) women gaining within the Institute of Medicine recommendations. There was an increased risk for small for gestational age, 3.7% (OR 2.34, 95% CI 1.15-4.76) among women in obesity class III losing weight, but there was no significantly increased risk of small for gestational age in the same group with low weight gain. Obese women (class II and III) who lose weight during pregnancy seem to have a decreased or unaffected risk for cesarean delivery, large for gestational age, pre-eclampsia, excessive postpartum bleeding, instrumental delivery, low Apgar score, and fetal distress. The twofold increased risk of small for gestational age in obesity class III and weight loss (3.7%) is slightly above the overall prevalence of small-for-gestational-age births in Sweden (3.6%).

Maxillary canine-first premolar bilateral transposition in a Class III patient: A case report.

PubMed

Potrubacz, Maciej Iancu; Tepedino, Michele; Chimenti, Claudio

2016-05-01

Tooth transposition is a rare dental anomaly that often represents a challenge for the clinician. The case of a girl with skeletal Class III malocclusion and concomitant maxillary canine-first premolar bilateral transposition, followed from 7 to 17 years of age, is presented. After a first phase of treatment aimed at resolving the Class III malocclusion, the transposition was maintained and the case finalized with a multibracket appliance.

Thin-plate spline analysis of the cranial base in subjects with Class III malocclusion.

PubMed

Singh, G D; McNamara, J A; Lozanoff, S

1997-08-01

The role of the cranial base in the emergence of Class III malocclusion is not fully understood. This study determines deformations that contribute to a Class III cranial base morphology, employing thin-plate spline analysis on lateral cephalographs. A total of 73 children of European-American descent aged between 5 and 11 years of age with Class III malocclusion were compared with an equivalent group of subjects with a normal, untreated, Class I molar occlusion. The cephalographs were traced, checked and subdivided into seven age- and sex-matched groups. Thirteen points on the cranial base were identified and digitized. The datasets were scaled to an equivalent size, and statistical analysis indicated significant differences between average Class I and Class III cranial base morphologies for each group. Thin-plate spline analysis indicated that both affine (uniform) and non-affine transformations contribute toward the total spline for each average cranial base morphology at each age group analysed. For non-affine transformations, Partial warps 10, 8 and 7 had high magnitudes, indicating large-scale deformations affecting Bolton point, basion, pterygo-maxillare, Ricketts' point and articulare. In contrast, high eigenvalues associated with Partial warps 1-3, indicating localized shape changes, were found at tuberculum sellae, sella, and the frontonasomaxillary suture. It is concluded that large spatial-scale deformations affect the occipital complex of the cranial base and sphenoidal region, in combination with localized distortions at the frontonasal suture. These deformations may contribute to reduced orthocephalization or deficient flattening of the cranial base antero-posteriorly that, in turn, leads to the formation of a Class III malocclusion.

Alteration of Occlusal Plane in Orthognathic Surgery: Clinical Features to Help Treatment Planning on Class III Patients

PubMed Central

Costa, Tony Eduardo; Barbosa, Saulo de Matos; Pereira, Rodrigo Alvitos; Chaves Netto, Henrique Duque de Miranda

2018-01-01

Dentofacial deformities (DFD) presenting mainly as Class III malocclusions that require orthognathic surgery as a part of definitive treatment. Class III patients can have obvious signs such as increasing the chin projection and chin throat length, nasolabial folds, reverse overjet, and lack of upper lip support. However, Class III patients can present different facial patterns depending on the angulation of occlusal plane (OP), and only bite correction does not always lead to the improvement of the facial esthetic. We described two Class III patients with different clinical features and inclination of OP and had undergone different treatment planning based on 6 clinical features: (I) facial type; (II) upper incisor display at rest; (III) dental and gingival display on smile; (IV) soft tissue support; (V) chin projection; and (VI) lower lip projection. These patients were submitted to orthognathic surgery with different treatment plannings: a clockwise rotation and counterclockwise rotation of OP according to their facial features. The clinical features and OP inclination helped to define treatment planning by clockwise and counterclockwise rotations of the maxillomandibular complex, and two patients undergone to bimaxillary orthognathic surgery showed harmonic outcomes and stables after 2 years of follow-up. PMID:29854480

Assessment of the changes in quality of life of patients with class II and III deformities during and after orthodontic-surgical treatment.

PubMed

Baherimoghaddam, T; Tabrizi, R; Naseri, N; Pouzesh, A; Oshagh, M; Torkan, S

2016-04-01

The aim of this longitudinal study was to assess and compare the oral health-related quality of life (OHRQoL) of patients with class II and III deformities during and after orthodontic-surgical treatment. Thirty class III and 28 class II patients were evaluated at baseline (T0), just prior to surgery (T1), at 6 months after surgery (T2), and at 12 months after debonding (T3). OHRQoL was assessed using the Oral Health Impact Profile (OHIP-14). Friedman two-way analysis of variance and the Wilcoxon signed-rank test were performed to compare the relative changes in OHRQoL during treatment. Significant changes in the overall OHIP-14 scores were observed during and after orthodontic-surgical treatment in both groups. During the pre-surgical stage, psychological discomfort and psychological disability decreased in class III patients, and class II patients experienced a significant deterioration in psychological discomfort during the same period. Six months after surgery, patients in both groups showed improvements in psychological discomfort, social disability, and handicap. Physical disability and functional limitation showed further improvement at 12 months after debonding in class II patients. This study reaffirms that orthodontic-surgical treatment has a significant effect on the OHRQoL of class III and class II patients. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Quantitative assessment of the effectiveness of phase 1 orthodontic treatment using the American Board of Orthodontics Discrepancy Index.

PubMed

Vasilakou, Nefeli; Araujo, Eustaquio A; Kim, Ki Beom; Oliver, Donald R

2016-12-01

This retrospective study included a sample of 300 randomly selected patients from the archived records of Saint Louis University's graduate orthodontic clinic, St. Louis, Mo, from 1990 to 2012. The objective of this study was to quantify the changes obtained in phase 1 of orthodontic treatment and determine how much improvement, if any, has occurred before the initiation of the second phase. For the purpose of this study, prephase 1 and prephase 2 records of 300 subjects were gathered. All were measured using the American Board of Ortodontics Discrepancy Index (DI), and a score was given for each phase. The difference of the 2 scores indicated the quantitative change of the complexity of the treatment. Paired t tests were used to compare the scores. Additionally, the sample was categorized into 3 groups according to the Angle classifications, and the same statistics were used to identify significant changes between the 2 scores. Analysis of variance was applied to compare the 3 groups and determine which had the most change. Percentages of change were calculated for the significant scores. The total DI score overall and the scores of all 3 groups were significantly reduced from before to after phase 1. Overall, 42% improvement was observed. The Class I group showed 49.3% improvement, the Class II group 34.5% and the Class III group 58.5%. Most components of the DI improved significantly, but a few showed negative changes. Significant reductions of DI scores were observed in the total sample and in all Angle classification groups. This indicates that early treatment reduces the complexity of the malocclusions. Only 2 components of the DI showed statistically significant negative changes. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Validation and extraction of molecular-geometry information from small-molecule databases.

PubMed

Long, Fei; Nicholls, Robert A; Emsley, Paul; Graǽulis, Saulius; Merkys, Andrius; Vaitkus, Antanas; Murshudov, Garib N

2017-02-01

A freely available small-molecule structure database, the Crystallography Open Database (COD), is used for the extraction of molecular-geometry information on small-molecule compounds. The results are used for the generation of new ligand descriptions, which are subsequently used by macromolecular model-building and structure-refinement software. To increase the reliability of the derived data, and therefore the new ligand descriptions, the entries from this database were subjected to very strict validation. The selection criteria made sure that the crystal structures used to derive atom types, bond and angle classes are of sufficiently high quality. Any suspicious entries at a crystal or molecular level were removed from further consideration. The selection criteria included (i) the resolution of the data used for refinement (entries solved at 0.84 Å resolution or higher) and (ii) the structure-solution method (structures must be from a single-crystal experiment and all atoms of generated molecules must have full occupancies), as well as basic sanity checks such as (iii) consistency between the valences and the number of connections between atoms, (iv) acceptable bond-length deviations from the expected values and (v) detection of atomic collisions. The derived atom types and bond classes were then validated using high-order moment-based statistical techniques. The results of the statistical analyses were fed back to fine-tune the atom typing. The developed procedure was repeated four times, resulting in fine-grained atom typing, bond and angle classes. The procedure will be repeated in the future as and when new entries are deposited in the COD. The whole procedure can also be applied to any source of small-molecule structures, including the Cambridge Structural Database and the ZINC database.

Evaluation of the closest speaking space in different dental and skeletal occlusions.

PubMed

Sakar, Olcay; Bural, Canan; Sülün, Tonguç; Öztaş, Evren; Marşan, Gülnaz

2013-04-01

The closest speaking space (CSS) together with the vertical overlap of anterior teeth during the production of the /s/ sound have not been previously investigated with respect to differences in dental and skeletal orthodontic classifications. The purpose of this study was to investigate the CSS in dental and skeletal occlusions and to analyze the cause and effect relationship of the CSS and the amount of the vertical overlap of anterior teeth. Poly vinylsiloxane interocclusal registration material was placed bilaterally onto the occlusal surfaces of premolar and molar teeth of 155 native Turkish speaking adolescent and young adult dentate participants, who were then asked to pronounce the word seyis. The thinnest point between the maxillary and mandibular teeth was recorded in millimeters as the CSS. The occlusion of each participant was classified according to the Angle dental and Steiner skeletal classifications. The differences in CSS values within each classification were statistically analyzed with the Kruskal-Wallis test, and the correlation between the CSS and the vertical overlap was statistically analyzed with the Spearman Rho Correlation tests (P<.05). The differences in the CSS were only significant between Angle Class II division 2 and Class III groups (P=.034), while the differences in the CSS between skeletal classes were not significant. The correlation between the amount of CSS and the amount of vertical overlap was not significant. The results showed that regardless of dental and skeletal occlusions, average CSS values could be used to determine the occlusal vertical dimension of prosthetic restorations. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Grade classification of neuroepithelial tumors using high-resolution magic-angle spinning proton nuclear magnetic resonance spectroscopy and pattern recognition.

PubMed

Chen, WenXue; Lou, HaiYan; Zhang, HongPing; Nie, Xiu; Lan, WenXian; Yang, YongXia; Xiang, Yun; Qi, JianPin; Lei, Hao; Tang, HuiRu; Chen, FenEr; Deng, Feng

2011-07-01

Clinical data have shown that survival rates vary considerably among brain tumor patients, according to the type and grade of the tumor. Metabolite profiles of intact tumor tissues measured with high-resolution magic-angle spinning proton nuclear magnetic resonance spectroscopy (HRMAS (1)H NMRS) can provide important information on tumor biology and metabolism. These metabolic fingerprints can then be used for tumor classification and grading, with great potential value for tumor diagnosis. We studied the metabolic characteristics of 30 neuroepithelial tumor biopsies, including two astrocytomas (grade I), 12 astrocytomas (grade II), eight anaplastic astrocytomas (grade III), three glioblastomas (grade IV) and five medulloblastomas (grade IV) from 30 patients using HRMAS (1)H NMRS. The results were correlated with pathological features using multivariate data analysis, including principal component analysis (PCA). There were significant differences in the levels of N-acetyl-aspartate (NAA), creatine, myo-inositol, glycine and lactate between tumors of different grades (P<0.05). There were also significant differences in the ratios of NAA/creatine, lactate/creatine, myo-inositol/creatine, glycine/creatine, scyllo-inositol/creatine and alanine/creatine (P<0.05). A soft independent modeling of class analogy model produced a predictive accuracy of 87% for high-grade (grade III-IV) brain tumors with a sensitivity of 87% and a specificity of 93%. HRMAS (1)H NMR spectroscopy in conjunction with pattern recognition thus provides a potentially useful tool for the rapid and accurate classification of human brain tumor grades.

The effects of forehead and neck position on esthetics of class I, II and III profiles.

PubMed

Salehi, Parisa; Oshagh, Morteza; Aleyasin, Zeinab S; Pakshir, Hamid Reza

2014-01-01

All parts of the face, other than jaw relationships, should be considered in orthodontic treatment planning. The role of forehead and neck in facial esthetics is well known; however, the majority of conventional facial analysis methods have not considered them. Neck and forehead may confer mutual effects on equilibrium and on esthetics of other facial components, and may change the overall convexity/concavity view of the profile. Therefore, the aim of this study was to assess the effect of anteroposterior position of the forehead and neck on the esthetics of skeletal class I, II and III jaw relationships using profile silhouettes. Class II and III jaw relationships were constructed on the silhouette of a class I normal profile by altering the mandibular position. Retruded, normal and protruded positions were also applied for the forehead and neck. Three hundred Iranian laypeople (150 men, 150 women) scored the esthetics of profile silhouettes from 1 to 7. Half of the participants were told to consider the profiles as a man, and the other half were told to consider them as a woman. Data were analyzed using non-parametric methods. Class I jaw relation was found to be the most beautiful profile followed by class II and III respectively. Esthetics of different positions of the neck and forehead were significantly different (P < 0.05). In subjects with a normal neck and forehead position, and those with a retruded neck, the best esthetic relationship was class I, and the worst was class III. For protruded foreheads, the best jaw relationship was class II for females and class I for males, and the worst was class III for both. In a retruded forehead position, the most preferred jaw relationship was class I, and the worst was class II. For profiles with a protruded neck, the best esthetics was found to be in class III jaw relationship, and the worst was in class II. There was a small difference in scoring for male and female profiles (P < 0.05); there were also small differences in scoring trends of men and women (P < 0.05). This study showed that the anteroposterior position of the forehead and neck affects the esthetics of jaw relationships in profile view. In laypeople's opinions, in a normal profile, the overall appearance is more important compared to the independent position of the neck and forehead; however, having jaw abnormalities, the neck plays an important independent role. The preferred jaw relation for profiles with each forehead or neck position was introduced.

46 CFR 174.255 - Restricted service.

Code of Federal Regulations, 2014 CFR

2014-10-01

... wind heeling moment, either to the angle of the second intercept of those curves or to the angle of heel at which downflooding would occur, whichever angle is less. (iii) A residual righting energy of at... righting moment and wind heeling moment, either to the angle of the second intercept of those curves or to...

46 CFR 174.255 - Restricted service.

Code of Federal Regulations, 2013 CFR

2013-10-01

... wind heeling moment, either to the angle of the second intercept of those curves or to the angle of heel at which downflooding would occur, whichever angle is less. (iii) A residual righting energy of at... righting moment and wind heeling moment, either to the angle of the second intercept of those curves or to...

46 CFR 174.255 - Restricted service.

Code of Federal Regulations, 2012 CFR

2012-10-01

... wind heeling moment, either to the angle of the second intercept of those curves or to the angle of heel at which downflooding would occur, whichever angle is less. (iii) A residual righting energy of at... righting moment and wind heeling moment, either to the angle of the second intercept of those curves or to...

25 CFR 290.11 - May an Indian tribe distribute per capita payments from net gaming revenues derived from either...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false May an Indian tribe distribute per capita payments from net gaming revenues derived from either Class II or Class III gaming without a tribal revenue... net gaming revenues derived from either Class II or Class III gaming without a tribal revenue...

Skeletal Class III and anterior open bite treatment with different retention protocols: a report of three cases.

PubMed

Farret, Milton Meri Benitez; Farret, Marcel Marchiori; Farret, Alessandro Marchiori

2012-09-01

The treatment of skeletal class III and anterior open bite can be unstable and orthodontists frequently observe relapse. Here, we report on the management of three patients with skeletal class III profiles and open bites treated by orthodontic camouflage. Each received a retention protocol involving the use of two separate appliances during the night and day accompanied by myofunctional therapy. Long-term follow-up revealed a stable outcome.

Strategies to finish orthodontic treatment with a Class III molar relationship: three patient reports.

PubMed

Farret, Milton M B; Farret, Marcel M; Farret, Alessandro M

2009-01-01

The purpose of this article is to review treatment concepts for patients with congenitally missing teeth in the mandible, for patients in whom teeth in only the mandibular arch were extracted, or for patients with Class III camouflage treatment. The therapy result in these situations is a Class III molar relationship. With this type of intercuspation, esthetic and functional aspects must be observed. © 2009 BY QUINTESSENCE PUBLISHING CO, INC.

Developmental Role and Auxin Responsiveness of Class III Homeodomain Leucine Zipper Gene Family Members in Rice1[C][W][OA

PubMed Central

Itoh, Jun-Ichi; Hibara, Ken-Ichiro; Sato, Yutaka; Nagato, Yasuo

2008-01-01

Members of the Class III homeodomain leucine zipper (Class III HD-Zip) gene family are central regulators of crucial aspects of plant development. To better understand the roles of five Class III HD-Zip genes in rice (Oryza sativa) development, we investigated their expression patterns, ectopic expression phenotypes, and auxin responsiveness. Four genes, OSHB1 to OSHB4, were expressed in a localized domain of the shoot apical meristem (SAM), the adaxial cells of leaf primordia, the leaf margins, and the xylem tissue of vascular bundles. In contrast, expression of OSHB5 was observed only in phloem tissue. Plants ectopically expressing microRNA166-resistant versions of the OSHB3 gene exhibited severe defects, including the ectopic production of leaf margins, shoots, and radialized leaves. The treatment of seedlings with auxin quickly induced ectopic OSHB3 expression in the entire region of the SAM, but not in other tissues. Furthermore, this ectopic expression of OSHB3 was correlated with leaf initiation defects. Our findings suggest that rice Class III HD-Zip genes have conserved functions with their homologs in Arabidopsis (Arabidopsis thaliana), but have also acquired specific developmental roles in grasses or monocots. In addition, some Class III HD-Zip genes may regulate the leaf initiation process in the SAM in an auxin-dependent manner. PMID:18567825

Differentiation of functional constipation and constipation predominant irritable bowel syndrome based on Rome III criteria: a population-based study.

PubMed

Koloski, N A; Jones, M; Young, M; Talley, N J

2015-05-01

While the Rome III classification recognises functional constipation (FC) and constipation predominant IBS (IBS-C) as distinct disorders, recent evidence has suggested that these disorders are difficult to separate in clinical practice. To identify whether clinical and lifestyle factors differentiate Rome III-defined IBS-C from FC based on gastrointestinal symptoms and lifestyle characteristics. 3260 people randomly selected from the Australian population returned a postal survey. FC and IBS-C were defined according to Rome III. The first model used logistic regression to differentiate IBS-C from FC based on lifestyle, quality-of-life and psychological characteristics. The second approach was data-driven employing latent class analysis (LCA) to identify naturally occurring clusters in the data considering all symptoms involved in the Rome III criteria for IBS-C and FC. We found n = 206 (6.5%; 95% CI 5.7-7.4%) people met strict Rome III FC whereas n = 109 (3.5%; 95% CI 2.8-4.1%) met strict Rome III IBS-C. The case-control approach indicated that FC patients reported an older age at onset of constipation, were less likely to exercise, had higher mental QoL and less health care seeking than IBS-C. LCA yielded one latent class that was predominantly (75%) FC, while the other class was approximately half IBS-C and half FC. The FC-dominated latent class had clearly lower levels of symptoms used to classify IBS (pain-related symptoms) and was more likely to be male (P = 0.046) but was otherwise similar in distribution of lifestyle factors to the mixed class. The latent class analysis approach suggests a differentiation based more on symptom severity rather than the Rome III view. © 2015 John Wiley & Sons Ltd.

25 CFR 522.6 - Approval requirements for class III ordinances.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 522.6 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.6 Approval...) The tribe shall have the sole proprietary interest in and responsibility for the conduct of any gaming...

Predictors of favorable soft tissue profile outcomes following Class II Twin-block treatment

PubMed Central

Kim, Ji-Eun; Mah, Su-Jung; Kim, Tae-Woo; Kim, Su-Jung; Park, Ki-Ho

2018-01-01

Objective The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Methods Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. Results An independent t-test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Conclusions Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment. PMID:29291184

Camouflage treatment for class III malocclusion combined with traction of an impacted maxillary central incisor.

PubMed

Closs, Luciane Quadrado; Mundstock, Karina Santos; Ribeiro, Darlene Santos; Reston, Eduardo Galia; Silva, Aurelício Novaes

2010-01-01

This case report describes the treatment of a patient with an unerupted maxillary left central incisor, class III malocclusion with crossbite of the maxillary posterior teeth and lateral open bite. Treatment consisted of rapid maxillary expansion followed by anterior space opening, maxillary protraction and traction of the unerupted teeth with a light force system. Favorable results were obtained in terms of correcting incisor position and class III malocclusion. The results achieved remained stable throughout a 4-year retention period.

[Work and health status of workers of shoe manufacturing industries].

PubMed

Mironov, A I; Kirillov, V F; Bul'bulian, M A; Golubeva, A P; Kraeva, G K; Kuznetsova, A I; Nikolaeva, G M

2001-01-01

According to work conditions, severity and intensity, the main shoe-making occupations are assigned to III class of I-II jeopardy grade. If new technology applied, the work is assigned to I-II jeopardy class, being optimal--allowable. Increased mortality with liver cancer and lympholeucosis was revealed among workers contacting chloroprene.

The Bacillus subtilis ywjI (glpX) gene encodes a class II fructose-1,6-bisphosphatase, functionally equivalent to the class III Fbp enzyme.

PubMed

Jules, Matthieu; Le Chat, Ludovic; Aymerich, Stéphane; Le Coq, Dominique

2009-05-01

We present here experimental evidence that the Bacillus subtilis ywjI gene encodes a class II fructose-1,6-bisphosphatase, functionally equivalent to the fbp-encoded class III enzyme, and constitutes with the upstream gene, murAB, an operon transcribed at the same level under glycolytic or gluconeogenic conditions.

The Bacillus subtilis ywjI (glpX) Gene Encodes a Class II Fructose-1,6-Bisphosphatase, Functionally Equivalent to the Class III Fbp Enzyme▿

PubMed Central

Jules, Matthieu; Le Chat, Ludovic; Aymerich, Stéphane; Le Coq, Dominique

2009-01-01

We present here experimental evidence that the Bacillus subtilis ywjI gene encodes a class II fructose-1,6-bisphosphatase, functionally equivalent to the fbp-encoded class III enzyme, and constitutes with the upstream gene, murAB, an operon transcribed at the same level under glycolytic or gluconeogenic conditions. PMID:19270101

Prevalence of vulvovaginitis and relation to physical findings in girls assessed for suspected child sexual abuse.

PubMed

Rahman, Gisel; Ocampo, Dolores; Rubinstein, Anahí; Risso, Paula

2015-10-01

The presence of sexually transmitted infections (STIs) in patients with suspected sexual abuse is uncommon in the field of pediatrics. To establish the prevalence of anogenital findings and their relation to the presence of STIs in girls referred for suspected child sexual abuse. Retrospective study conducted between January 1st, 2003 and December 31st, 2013. Physical findings and detection of STIs in girls with suspected child sexual abuse were analyzed. One thousand thirty-four patients were included. Their median age was 7.9 years old. Anogenital findings were classified as class I (normal):38.4%, class II (nonspecific):38.1%, class III (specific):19.9% and class IV (definitive):3.6%. STIs were observed in 42 patients (4.1%). A relation was established between STIs and the classification of physical findings: 10 (class II: 9; class III: 1) Neisseria gonorrhoeae, 17 (class I: 2; class II: 8; class III: 7) Chlamydia trachomatis, 15 (class I: 2; class II: 10; class III: 3) Trichomonas vaginalis. Statistically significant differences for Trichomonas vaginalis (p= 0.01) and Neisseria gonorrhoeae (p < 0.0001) were observed, with predominance of nonspecific clinical signs. Both nonspecific and specific findings were similarly observed for Chlamydia trachomatis (p= 0.03). Most cases of girls with suspected child sexual abuse had normal or nonspecific anogenital findings. The prevalence of STIs in these girls is low. Trichomonas vaginalis and Neisseria gonorrhoeae were related to nonspecific findings, while both nonspecific and specific findings were observed for Chlamydia trachomatis.

Spline analysis of the mandible in human subjects with class III malocclusion.

PubMed

Singh, G D; McNamara, J A; Lozanoff, S

1997-05-01

This study determines deformations that contribute to a Class III mandibular morphology, employing thin-plate spline (TPS) analysis. A total of 133 lateral cephalographs of prepubertal children of European-American descent with either a Class I molar occlusion or a Class III malocclusion were compared. The cephalographs were traced and checked, and eight homologous landmarks on the mandible were identified and digitized. The datasets were scaled to an equivalent size and subjected to statistical analyses. These tests indicated significant differences between average Class I and Class III mandibular morphologies. When the sample was subdivided into seven age and sex-matched groups statistical differences were maintained for each group. TPS analysis indicated that both affine (uniform) and non-affine transformations contribute towards the total spline, and towards the average mandibular morphology at each age group. For non-affine transformations, partial warp 5 had the highest magnitude, indicating large-scale deformations of the mandibular configuration between articulare and pogonion. In contrast, partial warp 1 indicated localized shape changes in the mandibular symphyseal region. It is concluded that large spatial-scale deformations affect the body of the mandible, in combination with localized distortions further anteriorly. These deformations may represent a developmental elongation of the mandibular corpus antero-posteriorly that, allied with symphyseal changes, leads to the appearance of a Class III prognathic mandibular profile.

Prediction of future uniform milk prices in Florida federal milk marketing order 6 from milk futures markets.

PubMed

De Vries, A; Feleke, S

2008-12-01

This study assessed the accuracy of 3 methods that predict the uniform milk price in Federal Milk Marketing Order 6 (Florida). Predictions were made for 1 to 12 mo into the future. Data were from January 2003 to May 2007. The CURRENT method assumed that future uniform milk prices were equal to the last announced uniform milk price. The F+BASIS and F+UTIL methods were based on the milk futures markets because the futures prices reflect the market's expectation of the class III and class IV cash prices that are announced monthly by USDA. The F+BASIS method added an exponentially weighted moving average of the difference between the class III cash price and the historical uniform milk price (also known as basis) to the class III futures price. The F+UTIL method used the class III and class IV futures prices, the most recently announced butter price, and historical utilizations to predict the skim milk prices, butterfat prices, and utilizations in all 4 classes. Predictions of future utilizations were made with a Holt-Winters smoothing method. Federal Milk Marketing Order 6 had high class I utilization (85 +/- 4.8%). Mean and standard deviation of the class III and class IV cash prices were $13.39 +/- 2.40/cwt (1 cwt = 45.36 kg) and $12.06 +/- 1.80/cwt, respectively. The actual uniform price in Tampa, Florida, was $16.62 +/- 2.16/cwt. The basis was $3.23 +/- 1.23/cwt. The F+BASIS and F+UTIL predictions were generally too low during the period considered because the class III cash prices were greater than the corresponding class III futures prices. For the 1- to 6-mo-ahead predictions, the root of the mean squared prediction errors from the F+BASIS method were $1.12, $1.20, $1.55, $1.91, $2.16, and $2.34/cwt, respectively. The root of the mean squared prediction errors ranged from $2.50 to $2.73/cwt for predictions up to 12 mo ahead. Results from the F+UTIL method were similar. The accuracies of the F+BASIS and F+UTIL methods for all 12 fore-cast horizons were not significantly different. Application of the modified Mariano-Diebold tests showed that no method included all the information contained in the other methods. In conclusion, both F+BASIS and F+UTIL methods tended to more accurately predict the future uniform milk prices than the CURRENT method, but prediction errors could be substantial even a few months into the future. The majority of the prediction error was caused by the inefficiency of the futures markets to predict the class III cash prices.

Skeletal effects in Angle Class II/1 patients treated with the functional regulator type II : Cephalometric and tensor analysis.

PubMed

Schulz, Simone; Koos, Bernd; Duske, Kathrin; Stahl, Franka

2016-11-01

The purpose of this work was to employ both cephalometric and tensor analysis in characterizing the skeletal changes experienced by patients with Angle Class II/1 malocclusion during functional orthodontic treatment with the functional regulator type II. A total of 23 patients with Class II/1 malocclusion based on lateral cephalograms obtained before and after treatment with the functional regulator type II were analyzed. Another 23 patients with Angle Class II/1 malocclusion who had not undergone treatment were included as controls. Our cephalometric data attest to significant therapeutic effects of the functional regulator type II on the skeletal mandibular system, including significant advancement of the mandible, increases in effective mandibular length with enhancement of the chin profile, and reduction of growth-related bite deepening. No treatment-related effects were observed at the cranial-base and midface levels. In addition, tensor analysis revealed significant stimulation of mandibular growth in sagittal directions, without indications of growth effects on the maxilla. Its growth-pattern findings differed from those of cephalometric analysis by indicating that the appliance did promote horizontal development, which supports the functional orthodontic treatment effect in Angle Class II/1 cases. Tensor analysis yielded additional insights into sagittal and vertical growth changes not identifiable by strictly cephalometric means. The functional regulator type II was an effective treatment modality for Angle Class II/1 malocclusion and influenced the skeletal development of these patients in favorable ways.

Patient selection for whole brain radiotherapy (WBRT) in a large lung cancer cohort: Impact of a new Dutch guideline on brain metastases.

PubMed

Hendriks, Lizza E L; Troost, Esther G C; Steward, Allan; Bootsma, Gerben P; De Jaeger, Katrien; van den Borne, Ben E E M; Dingemans, Anne-Marie C

2014-07-01

Median survival after diagnosis of brain metastases is, depending on the Recursive Partitioning Analysis (RPA) classes, 7.1 (class I) to 2.3 months (class III). In 2011 the Dutch guideline on brain metastases was revised, advising to withhold whole brain radiotherapy (WBRT) in RPA class III. In this large retrospective study, we evaluated the guideline's use in daily practice. Data of 428 lung cancer patients undergoing WBRT for brain metastases (2004-2012) referred from three Dutch hospitals were retrospectively analyzed. Details on Karnofsky performance score (KPS), age, control of primary tumor, extracranial metastases, histology, and survival after diagnosis of brain metastases were collected. RPA class was determined using the first four items. In total 327 patients had non-small cell lung cancer (NSCLC) and 101 small cell lung cancer (SCLC). For NSCLC, 6.1%, 71.9%, and 16.2% were classified as RPA I, II, and III, respectively, and 5.8% could not be classified. For SCLC this was 8.9%, 66.3%, 14.9%, and 9.9%, respectively. Before the revised guideline was implemented, 11.3-21.3% of WBRT patients were annually classified as RPA III. In the year thereafter, this was 13.0% (p = 0.646). Median survival (95% CI) for NSCLC RPA class I, II, and III was 11.4 (9.9-12.9), 4.0 (3.4-4.7), and 1.7 (1.3-2.0) months, respectively. For SCLC this was 7.9 (4.1-11.7), 4.7 (3.3-6.1), and 1.7 (1.5-1.8) months. Although it is advised to withhold WBRT in RPA class III patients, in daily practice 11.3-21.3% of WBRT-treated patients were classified as RPA III. The new guideline did not result in a decrease. Reasons for referral of RPA III patients despite a low KPS were not found. Despite WBRT, survival of RPA III patients remains poor and this poor outcome should be stressed in practice guidelines. Therefore, better awareness amongst physicians would prevent some patients from being treated unnecessarily.

Regulation of Bacteriophage T5 Development by ColI Factors

PubMed Central

Moyer, R. W.; Fu, A. S.; Szabo, C.

1972-01-01

The I-type colicinogenic factor ColIb transforms Escherichia coli from a permissive to a nonpermissive host for bacteriophage T5 reproduction by preventing complete expression of the phage genome. T5-infected ColIb+ cells synthesize only class I (early) phage protein and ribonucleic acid (RNA). Neither phage-specific class II proteins [associated with viral deoxyribonucleic acid (DNA) replication] nor class III proteins (phage structural components) are formed due to the failure of the infected ColIb+ cells to synthesize class II or class III phage-specific messenger RNA. Comparable studies with T5-infected cells colicinogenic for the related ColIa factor revealed no decrease in the yield of progeny phage although the presence of the ColIa factor leads to a significant reduction in the amount of phage-directed class III protein synthesis. Images PMID:4554465

The Effect of Chin-cup Therapy in Class III Malocclusion: A Systematic Review

PubMed Central

Mousoulea, Sophia; Tsolakis, Ioannis; Ferdianakis, Efstratios; Tsolakis, Apostolos I.

2016-01-01

Background: The treatment of Class III malocclusion has been challenging for orthodontists. Among a plethora of treatment modalities, the chin-cup is considered a traditional appliance for early orthopedic intervention. Objective: The present study aims to investigate the current scientific evidence regarding the effectiveness of chin-cup therapy in Class III malocclusion of prognathic growing patients. Method: A systematic review of the literature was conducted using PubMed/Medline and the Cochrane Central Register of Controlled Trials from January 1954 to October 2015. Articles were selected based on established inclusion/ exclusion criteria. Results: The search strategy resulted in 3285 articles.14 studies were selected for the final analysis. They were all CCTs, 13 of retrospective and 1 of prospective design. Methodological quality was evaluated by a risk of bias assessment, as suggested by the Cochrane Risk of Bias Assessment Tool for Non-Randomized Studies on Interventions. The reported evidence presented favorable short-term outcomes both in hard and soft tissues improving the Class III profile, as well as desirable dento-alveolar changes, positively affecting the Class III malocclusion. Conclusion: There is considerable agreement between studies that chin-cup therapy can be considered for the short-term treatment of growing patients with Class III malocclusion, as indicated by favorable changes both in the hard and soft tissues. The existence of considerable risk of bias in all selected studies and the unclear long-term effectiveness of chin-cup therapy highlight the need for further investigation to draw reliable conclusions. PMID:28077971

Treatment burden in patients with at least one class IV or V CFTR mutation.

PubMed

Dewulf, Jonas; Vermeulen, François; Wanyama, Simeon; Thomas, Muriel; Proesmans, Marijke; Dupont, Lieven; De Boeck, Kris

2015-12-01

CFTR mutations are grouped according to disease-causing mechanism. Several studies demonstrated that patients having at least one mutation of class IV/V, present with a milder phenotype, but little is known about their relative treatment burden. We compared treatment burden between patients with two class I, II, or III mutations and patients with at least one mutation of class IV/V in the 2010 database of the Belgian CF Registry. We calculated a "Treatment Burden Index" (TBI) by assigning long term therapies to categories low, medium and high intensity, for differential weighing in the total score. There were 779 patients with two known class I/II/III mutations and 94 patients with at least one class IV/V mutation. Compared to class I/II/III, class IV/V patients had a lower median number of clinic visits (4 vs. 5; P < 0.001), a lower risk of hospitalization (24.7% vs. 50.8%; P < 0.001) and intravenous antibiotic treatment (23.5% vs. 46.0%; P < 0.001) and a lower median TBI (6 vs. 9; P < 0.001). These differences remained significant when only class IV/V patients with pancreatic insufficiency (n = 31) were considered. This study clearly demonstrates the significantly lower treatment burden in patients with CF and at least one class IV/V mutation compared to patients with two class I/II/III mutations and contributes to providing better individual counseling at time of diagnosis. © 2015 Wiley Periodicals, Inc.

40 CFR 147.1953 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1953 Section 147.1953 Protection of... enhanced recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure...

40 CFR 147.1953 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1953 Section 147.1953 Protection of... enhanced recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure...

Variations in tooth size and arch dimensions in Malay schoolchildren.

PubMed

Hussein, Khalid W; Rajion, Zainul A; Hassan, Rozita; Noor, Siti Noor Fazliah Mohd

2009-11-01

To compare the mesio-distal tooth sizes and dental arch dimensions in Malay boys and girls with Class I, Class II and Class III malocclusions. The dental casts of 150 subjects (78 boys, 72 girls), between 12 and 16 years of age, with Class I, Class II and Class III malocclusions were used. Each group consisted of 50 subjects. An electronic digital caliper was used to measure the mesio-distal tooth sizes of the upper and lower permanent teeth (first molar to first molar), the intercanine and intermolar widths. The arch lengths and arch perimeters were measured with AutoCAD software (Autodesk Inc., San Rafael, CA, U.S.A.). The mesio-distal dimensions of the upper lateral incisors and canines in the Class I malocclusion group were significantly smaller than the corresponding teeth in the Class III and Class II groups, respectively. The lower canines and first molars were significantly smaller in the Class I group than the corresponding teeth in the Class II group. The lower intercanine width was significantly smaller in the Class II group as compared with the Class I group, and the upper intermolar width was significantly larger in Class III group as compared with the Class II group. There were no significant differences in the arch perimeters or arch lengths. The boys had significantly wider teeth than the girls, except for the left lower second premolar. The boys also had larger upper and lower intermolar widths and lower intercanine width than the girls. Small, but statistically significant, differences in tooth sizes are not necessarily accompanied by significant arch width, arch length or arch perimeter differences. Generally, boys have wider teeth, larger lower intercanine width and upper and lower intermolar widths than girls.

Sensitizing Tb(III) and Eu(III) emission with triarylboron functionalized 1,3-diketonato ligands.

PubMed

Smith, Larissa F; Blight, Barry A; Park, Hee-Jun; Wang, Suning

2014-08-04

Four BMes2Ar (Mes = mesityl, Ar = phenyl or duryl) functionalized 1,3-diketonato ligands have been investigated for use in selective sensitization of Tb(III) and Eu(III) emission. These ligands have the general formula of [R1C(O)CR2C(O)R3](-) (R1 = Ph, R2 = H, R3 = p-Ph-BMes2, L1; R1 = R3 = p-Ph-BMes2, R2 = H, L2; R1 = R3 = Me, R2 = p-Ph-BMes2, L3; R1 = R3 = Me, R2 = p-duryl-BMes2, L4) and belong to class I (L1 and L2) and class II (L3 and L4), respectively. In class I, the boron unit is conjugated with the phenyl linker and the diketone backbone, while in class II, the boron unit, the linker unit, and the diketone unit are nonconjugated with a mutually orthogonal arrangement. To understand the impact of the location of the BMes2Ar unit on the electronic properties of the 1,3-diketone molecules and their ability in activating lanthanide emission, the difluoroboron chelate compounds (1-BF2 to 4-BF2) of ligands L1-L4 were synthesized and examined. The class I ligands were effective in activating Eu(III) emission, while the class II ligands were effective in activating Tb(III) emission. Four Ln(III) complexes, 1Eu, 2Eu, 3Tb, and 4Tb, based on the L1-L4 ligands, respectively, were prepared and examined. The emission quantum efficiency of 1Eu and 2Eu is low (Φ(Eu) ≤ 0.01 in THF, 0.07-0.13 in the solid state), but can be greatly enhanced by the addition of fluoride ions. In contrast, the complex 4Tb has a moderate emission efficiency (Φ(Tb) = 0.14 in THF, 0.47 in the solid state) and experiences a distinct emission quenching upon the addition of fluoride. The selective sensitization of Eu(III) and Tb(III) by L1-L4 and the distinct luminescent response of their Ln(III) complexes toward fluoride ions are caused by the distinct intraligand charge transfer transitions of the two different classes of ligands involving the BMes2 unit.

Ortho-surgical management of skeletal Class III malocclusion

PubMed Central

Gupta, Rahul Kumar; Tikku, Tripti; Khanna, Rohit; Gupta, Hemant; Srivastava, Kamna; Verma, Sneh Lata

2015-01-01

Class III malocclusions are considered to be one of the most difficult problems to treat. Establishment of the treatment plan is based on the efficacy and thoughtful application by the clinician and easy acceptance by the patient. We are presenting a case report of an adult male patient with skeletal Class III malocclusion who was treated by orthosurgical approach in Department of Orthodontics in collaboration with Department of Oral and Maxillofacial Surgery. The treatment was complete with a positive overbite and acceptable occlusion and satisfactory facial esthetics using a combination approach. PMID:26668466

Minimizing shrinkage of interdental papilla height when treating multiple Miller Class III gingival recession defects.

PubMed

Mahn, Douglas H

2015-04-01

Miller Class III and IV gingival recession defects have interdental bone and soft-tissue loss that limit root coverage. Given the importance of the interdental papilla, protecting the integrity of this structure would seem prudent. Tunnel techniques have been successfully used to protect the interdental papilla. This article discusses the results of two cases in which multiple Miller Class III gingival recession defects were treated using tunnel-grafting techniques and an acellular dermal matrix. In both cases, root coverage was achieved while protecting the interdental papilla height.

Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions.

PubMed

Fraga, Marcelo Reis; Rodrigues, Andréia Fialho; Ribeiro, Luiz Claudio; Campos, Marcio José da Silva; Vitral, Robert Willer Farinazzo

2013-10-29

The present study aimed to determine and compare the anteroposterior position of the condyle in the mandibular fossa between groups of asymptomatic subjects with normal occlusion and asymptomatic subjects with Class I, Class II Division 1, and Class III malocclusions. Thirty persons with normal occlusion, 30 with Class I malocclusion, 30 with Class II Division 1, and 30 with Class III had computed tomography scans of their temporomandibular joints. The anterior joint space/posterior joint space (AJS/PJS) ratio was determined for the right and left joints. The paired t test was used to analyze the AJS/PJS ratio between both sides for each group. The ANOVA test was applied to verify the differences between the groups for the measurements of the right and left sides. In case the ANOVA test confirmed significance, the Dunnett's t test was performed to compare the groups of malocclusion with that of normal occlusion. The paired t test between the AJS/PJS relationships in the right and left sides showed the following p values: Class I (0.168), Class II Division 1 (0.662), Class III (0.991), and normal occlusion (0.390). The ANOVA test showed a p value of 0.445 for the comparisons of the right side and 0.040 for the left side. The Dunnett's t test demonstrated a statistically significant difference between the Class II group and the normal occlusion group (p value of 0.026) in the joints of the left side. Bilateral symmetry and lack of condyle centralization were common characteristics among all groups. The greatest condylar decentralization was observed in the Class II group, whereas the least condylar decentralization was found in the normal occlusion group.

How much incisor decompensation is achieved prior to orthognathic surgery?

PubMed

McNeil, Calum; McIntyre, Grant T; Laverick, Sean

2014-07-01

To quantify incisor decompensation in preparation for orthognathic surgery. Pre-treatment and pre-surgery lateral cephalograms for 86 patients who had combined orthodontic and orthognathic treatment were digitised using OPAL 2.1 [http://www.opalimage.co.uk]. To assess intra-observer reproducibility, 25 images were re-digitised one month later. Random and systematic error were assessed using the Dahlberg formula and a two-sample t-test, respectively. Differences in the proportions of cases where the maxillary (1100 +/- 60) or mandibular (900 +/- 60) incisors were fully decomensated were assessed using a Chi-square test (p<0.05). Mann-Whitney U tests were used to identify if there were any differences in the amount of net decompensation for maxillary and mandibular incisors between the Class II combined and Class III groups (p<0.05). Random and systematic error were less than 0.5 degrees and p<0.05, respectively. A greater proportion of cases had decompensated mandibular incisors (80%) than maxillary incisors (62%) and this difference was statistically significant (p=0.029). The amount of maxillary incisor decompensation in the Class II and Class III groups did not statistically differ (p=0.45) whereas the mandibular incisors in the Class III group underwent statistically significantly greater decompensation (p=0.02). Mandibular incisors were decompensated for a greater proportion of cases than maxillary incisors in preparation for orthognathic surgery. There was no difference in the amount of maxillary incisor decompensation between Class II and Class III cases. There was a greater net decompensation for mandibular incisors in Class III cases when compared to Class II cases. Key words:Decompensation, orthognathic, pre-surgical orthodontics, surgical-orthodontic.

40 CFR 147.2650 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTROL PROGRAMS Puerto Rico § 147.2650 State-administered program—Class I, II, III, IV, and V wells. The Underground Injection Control Program for all classes of wells in the Commonwealth of Puerto Rico, other than those on Indian lands, is the program administered by Puerto Rico's Environmental Quality Board (EQB...

40 CFR 147.2650 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CONTROL PROGRAMS Puerto Rico § 147.2650 State-administered program—Class I, II, III, IV, and V wells. The Underground Injection Control Program for all classes of wells in the Commonwealth of Puerto Rico, other than those on Indian lands, is the program administered by Puerto Rico's Environmental Quality Board (EQB...

40 CFR 147.2650 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2013 CFR

2013-07-01

... CONTROL PROGRAMS Puerto Rico § 147.2650 State-administered program—Class I, II, III, IV, and V wells. The Underground Injection Control Program for all classes of wells in the Commonwealth of Puerto Rico, other than those on Indian lands, is the program administered by Puerto Rico's Environmental Quality Board (EQB...

Moiré edge states in twisted graphene nanoribbons

NASA Astrophysics Data System (ADS)

Fleischmann, M.; Gupta, R.; Weckbecker, D.; Landgraf, W.; Pankratov, O.; Meded, V.; Shallcross, S.

2018-05-01

The edge physics of graphene based systems is well known to be highly sensitive to the atomic structure at the boundary, with localized zero mode edge states found only on the zigzag-type termination of the lattice. Here we demonstrate that the graphene twist bilayer supports an additional class of edge states, that (i) are found for all edge geometries and thus are robust against edge roughness, (ii) occur at energies coinciding with twist induced Van Hove singularities in the bulk and (iii) possess an electron density strongly modulated by the moiré lattice. Interestingly, these "moiré edge states" exist only for certain lattice commensurations and thus the edge physics of the twist bilayer is, in dramatic contrast to that of the bulk, not uniquely determined by the twist angle.

Localisation of deformations of the midfacial complex in subjects with class III malocclusions employing thin-plate spline analysis

PubMed Central

SINGH, G. D.; McNAMARA JR, J. A.; LOZANOFF, S.

1997-01-01

This study determines deformations of the midface that contribute to a class III appearance, employing thin-plate spline analysis. A total of 135 lateral cephalographs of prepubertal children of European-American descent with either class III malocclusions or a class I molar occlusion were compared. The cephalographs were traced and checked, and 7 homologous landmarks of the midface were identified and digitised. The data sets were scaled to an equivalent size and subjected to Procrustes analysis. These statistical tests indicated significant differences (P<0.05) between the averaged class I and class III morphologies. Thin-plate spline analysis indicated that both affine and nonaffine transformations contribute towards the total spline for the averaged midfacial configuration. For nonaffine transformations, partial warp 3 had the highest magnitude, indicating the large scale deformations of the midfacial configuration. These deformations affected the palatal landmarks, and were associated with compression of the midfacial complex in the anteroposterior plane predominantly. Partial warp 4 produced some vertical compression of the posterior aspect of the midfacial complex whereas partial warps 1 and 2 indicated localised shape changes of the maxillary alveolus region. Large spatial-scale deformations therefore affect the midfacial complex in an anteroposterior axis, in combination with vertical compression and localised distortions. These deformations may represent a developmental diminution of the palatal complex anteroposteriorly that, allied with vertical shortening of midfacial height posteriorly, results in class III malocclusions with a retrusive midfacial profile. PMID:9449078

Localisation of deformations of the midfacial complex in subjects with class III malocclusions employing thin-plate spline analysis.

PubMed

Singh, G D; McNamara, J A; Lozanoff, S

1997-11-01

This study determines deformations of the midface that contribute to a class III appearance, employing thinplate spline analysis. A total of 135 lateral cephalographs of prepubertal children of European-American descent with either class III malocclusions or a class I molar occlusion were compared. The cephalographs were traced and checked, and 7 homologous landmarks of the midface were identified and digitised. The data sets were scaled to an equivalent size and subjected to Procrustes analysis. These statistical tests indicated significant differences (P < 0.05) between the averaged class I and class III morphologies. Thinplate spline analysis indicated that both affine and nonaffine transformations contribute towards the total spline for the averaged midfacial configuration. For nonaffine transformations, partial warp 3 had the highest magnitude, indicating the large scale deformations of the midfacial configuration. These deformations affected the palatal landmarks, and were associated with compression of the midfacial complex in the anteroposterior plane predominantly. Partial warp 4 produced some vertical compression of the posterior aspect of the midfacial complex whereas partial warps 1 and 2 indicated localised shape changes of the maxillary alveolus region. large spatial-scale deformations therefore affect the midfacial complex in an anteroposterior axis, in combination with vertical compression and localised distortions. These deformations may represent a developmental diminution of the palatal complex anteroposteriorly that, allied with vertical shortening of midfacial height posteriorly, results in class III malocclusions with a retrusive midfacial profile.

Relationship between vertical facial patterns and dental arch form in class II malocclusion.

PubMed

Grippaudo, Cristina; Oliva, Bruno; Greco, Anna Lucia; Sferra, Simone; Deli, Roberto

2013-11-07

The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasion/mandibular plane angle (SN-MP)) in skeletal class II untreated patients. A sample of 73 Caucasians patients with untreated skeletal class II in permanent dentition was divided into three groups according to the values of the angle SN-MP. An evaluation of the arch form was performed by angular and linear relation values on each patient. Regression analysis was used to determine the statistical significance of the relationships between SN-MP angle and dental arch form. The differences among the three groups were analyzed for significance using a variance analysis. A decrease of the upper arch transversal diameters in high SN-MP angle patients and an increase in low angle SN-MP ones (P<0.05) were shown. Result analysis showed a change in upper arch shape, with a smaller intercanine width in patients with high SN-MP angle and a greater one in low angle patients. As SN-MP angle increased, the upper arch form tended to be narrower. No statistically significant difference in mandibular arch form among the three groups was found, except the angle value related to incisors position. The results showed the association between the upper dental arch form and the vertical facial pattern. On the contrary, the lower arch form was not related to the mandibular divergence.

Ehrlichia secretes Etf-1 to induce autophagy and capture nutrients for its growth through RAB5 and class III phosphatidylinositol 3-kinase

PubMed Central

Lin, Mingqun; Liu, Hongyan; Xiong, Qingming; Niu, Hua; Cheng, Zhihui; Yamamoto, Akitsugu; Rikihisa, Yasuko

2016-01-01

Ehrlichia chaffeensis is an obligatory intracellular bacterium that causes a potentially fatal emerging zoonosis, human monocytic ehrlichiosis. E. chaffeensis has a limited capacity for biosynthesis and metabolism and thus depends mostly on host-synthesized nutrients for growth. Although the host cell cytoplasm is rich with these nutrients, as E. chaffeensis is confined within the early endosome-like membrane-bound compartment, only host nutrients that enter the compartment can be used by this bacterium. How this occurs is unknown. We found that ehrlichial replication depended on autophagy induction involving class III phosphatidylinositol 3-kinase (PtdIns3K) activity, BECN1 (Beclin 1), and ATG5 (autophagy-related 5). Ehrlichia acquired host cell preincorporated amino acids in a class III PtdIns3K-dependent manner and ehrlichial growth was enhanced by treatment with rapamycin, an autophagy inducer. Moreover, ATG5 and RAB5A/B/C were routed to ehrlichial inclusions. RAB5A/B/C siRNA knockdown, or overexpression of a RAB5-specific GTPase-activating protein or dominant-negative RAB5A inhibited ehrlichial infection, indicating the critical role of GTP-bound RAB5 during infection. Both native and ectopically expressed ehrlichial type IV secretion effector protein, Etf-1, bound RAB5 and the autophagy-initiating class III PtdIns3K complex, PIK3C3/VPS34, and BECN1, and homed to ehrlichial inclusions. Ectopically expressed Etf-1 activated class III PtdIns3K as in E. chaffeensis infection and induced autophagosome formation, cleared an aggregation-prone mutant huntingtin protein in a class III PtdIns3K-dependent manner, and enhanced ehrlichial proliferation. These data support the notion that E. chaffeensis secretes Etf-1 to induce autophagy to repurpose the host cytoplasm and capture nutrients for its growth through RAB5 and class III PtdIns3K, while avoiding autolysosomal killing. PMID:27541856

Ehrlichia secretes Etf-1 to induce autophagy and capture nutrients for its growth through RAB5 and class III phosphatidylinositol 3-kinase.

PubMed

Lin, Mingqun; Liu, Hongyan; Xiong, Qingming; Niu, Hua; Cheng, Zhihui; Yamamoto, Akitsugu; Rikihisa, Yasuko

2016-11-01

Ehrlichia chaffeensis is an obligatory intracellular bacterium that causes a potentially fatal emerging zoonosis, human monocytic ehrlichiosis. E. chaffeensis has a limited capacity for biosynthesis and metabolism and thus depends mostly on host-synthesized nutrients for growth. Although the host cell cytoplasm is rich with these nutrients, as E. chaffeensis is confined within the early endosome-like membrane-bound compartment, only host nutrients that enter the compartment can be used by this bacterium. How this occurs is unknown. We found that ehrlichial replication depended on autophagy induction involving class III phosphatidylinositol 3-kinase (PtdIns3K) activity, BECN1 (Beclin 1), and ATG5 (autophagy-related 5). Ehrlichia acquired host cell preincorporated amino acids in a class III PtdIns3K-dependent manner and ehrlichial growth was enhanced by treatment with rapamycin, an autophagy inducer. Moreover, ATG5 and RAB5A/B/C were routed to ehrlichial inclusions. RAB5A/B/C siRNA knockdown, or overexpression of a RAB5-specific GTPase-activating protein or dominant-negative RAB5A inhibited ehrlichial infection, indicating the critical role of GTP-bound RAB5 during infection. Both native and ectopically expressed ehrlichial type IV secretion effector protein, Etf-1, bound RAB5 and the autophagy-initiating class III PtdIns3K complex, PIK3C3/VPS34, and BECN1, and homed to ehrlichial inclusions. Ectopically expressed Etf-1 activated class III PtdIns3K as in E. chaffeensis infection and induced autophagosome formation, cleared an aggregation-prone mutant huntingtin protein in a class III PtdIns3K-dependent manner, and enhanced ehrlichial proliferation. These data support the notion that E. chaffeensis secretes Etf-1 to induce autophagy to repurpose the host cytoplasm and capture nutrients for its growth through RAB5 and class III PtdIns3K, while avoiding autolysosomal killing.

40 CFR 147.903 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.903 Section 147.903 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1653 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1653 Section 147.1653 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.303 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.303 Section 147.303 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.2153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.2153 Section 147.2153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.103 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.103 Section 147.103 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.903 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.903 Section 147.903 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.303 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.303 Section 147.303 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.253 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.253 Section 147.253 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1353 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1353 Section 147.1353 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1453 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1453 Section 147.1453 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1153 Section 147.1153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1353 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1353 Section 147.1353 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.253 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.253 Section 147.253 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.103 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.103 Section 147.103 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1653 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1653 Section 147.1653 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1153 Section 147.1153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.1453 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1453 Section 147.1453 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

40 CFR 147.2153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.2153 Section 147.2153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

Cloning of the Arabidopsis and Rice Formaldehyde Dehydrogenase Genes: Implications for the Origin of Plant Adh Enzymes

PubMed Central

Dolferus, R.; Osterman, J. C.; Peacock, W. J.; Dennis, E. S.

1997-01-01

This article reports the cloning of the genes encoding the Arabidopsis and rice class III ADH enzymes, members of the alcohol dehydrogenase or medium chain reductase/dehydrogenase superfamily of proteins with glutathione-dependent formaldehyde dehydrogenase activity (GSH-FDH). Both genes contain eight introns in exactly the same positions, and these positions are conserved in plant ethanol-active Adh genes (class P). These data provide further evidence that plant class P genes have evolved from class III genes by gene duplication and acquisition of new substrate specificities. The position of introns and similarities in the nucleic acid and amino acid sequences of the different classes of ADH enzymes in plants and humans suggest that plant and animal class III enzymes diverged before they duplicated to give rise to plant and animal ethanol-active ADH enzymes. Plant class P ADH enzymes have gained substrate specificities and evolved promoters with different expression properties, in keeping with their metabolic function as part of the alcohol fermentation pathway. PMID:9215914

Guide to preemption of state-law claims against Class III PMA medical devices.

PubMed

Whitney, Daniel W

2010-01-01

There is a perception that the express preemption holding of the Supreme Court in Riegel v. Medtronic, 552 U.S. 312(2008), immunizes medical device manufacturers from common law personal injury actions involving Class III devices that received FDA clearance under a premarket approval application (PMA). In the aftermath of Riegel, many lawsuits involving Class III PMA devices have been dismissed by district courts applying the new heightened pleading standard of Bell Atlantic Corp. v. Twombly, 550 U.S. 544 (2007). Other lawsuits involving Class III PMA devices premised on fraud-on-FDA have been dismissed based on the implied preemption holding of the Supreme Court in Buckman v. Plaintiffs' Legal Comm., 531 U.S. 341 (2001). When these decisions are carefully analyzed together with Medtronic, Inc. v. Lohr, 518 U.S. 470 (1996), which found no preemption regarding a Class III device receiving FDA clearance through the 510(k) mechanism, it is apparent that the preemption defense does not apply universally to Class III PMA devices. The overall methodology for framing a non-preempted claim is to first identify conduct which violated the PMA or other specific requirements related to safety or efficacy. If such conduct can also be stated in terms of a breach of a parallel common law duty (e.g, failure to warn under strict liability or negligence, manufacturing defect or breach of warranty), then it would appear the claim is not preempted. Alternatively, regardless of a specific violation, common law remedies are not preempted by general CGMP requirements.

Tooth size discrepancies in Class II division 1 and Class III malocclusion requiring surgical-orthodontic or orthodontic treatment.

PubMed

McSwiney, Timothy P; Millett, Declan T; McIntyre, Grant T; Barry, Mark K; Cronin, Michael S

2014-06-01

To compare mean anterior (AR) and mean overall (OR) tooth size ratios, prevalence of clinically significant tooth size discrepancies (TSDs) and correlation between AR and OR in subjects with Class II division 1 and Class III malocclusion treated by surgical-orthodontic or orthodontic means. Retrospective, cross-sectional. State-funded and private clinics. From pre-treatment cohorts of 770 surgical and 610 non-surgical subjects, Class II division 1 and Class III malocclusion groups were identified with 60 surgical and 60 non-surgical subjects, comprising 30 males and 30 females, in each. AR and OR were calculated by landmarking digital models. Differences in AR and OR and their relationship were analysed using two-way analysis of variance (ANOVA) and a correlation coefficient, respectively. The proportions of the surgical and non-surgical groups with a TSD were assessed using logistic regression. Intra-examiner reproducibility involved re-landmarking 30 randomly selected image sets and differences in ARs and ORs were compared using a paired t-test. Random error was assessed using the intraclass correlation coefficient (ICC). Analyses were performed using SAS (SAS Institute Inc., Cary, NC, USA) at the 5% level of significance. There were no statistically significant differences associated with the measurement of either the mean AR (P = 0·913) or the mean OR (P = 0·874). ICC values were very high (AR = 0·95; OR = 0·90). Differences existed between both Class II and Class III surgical (AR: P<0·001; OR: P<0·001) and non-surgical groups (AR: P = 0·012; OR: P = 0·003). The AR and OR relationship was strong (correlation coefficient = 0·72). The highest percentage of clinically significant TSDs was seen in the AR of both Class II and Class III surgical groups (23·3%). In the cohort examined: AR and OR differed significantly for malocclusion groups. The prevalence of clinically significant TSDs did not differ significantly between surgical and non-surgical groups although the highest percentage of clinically significant TSDs was recorded for AR in Class II and Class III surgical cases. AR and OR were closely related. © 2014 British Orthodontic Society.

25 CFR 291.6 - What must the Secretary do upon receiving a proposal?

Code of Federal Regulations, 2010 CFR

2010-04-01

... CLASS III GAMING PROCEDURES § 291.6 What must the Secretary do upon receiving a proposal? Upon receipt of a proposal requesting Class III gaming procedures, the Secretary must: (a) Within 15 days, notify...

Oxoiron(IV) complexes as synthons for the assembly of heterobimetallic centers such as the Fe/Mn active site of Class Ic ribonucleotide reductases.

PubMed

Zhou, Ang; Crossland, Patrick M; Draksharapu, Apparao; Jasniewski, Andrew J; Kleespies, Scott T; Que, Lawrence

2018-01-01

Nonheme oxoiron(IV) complexes can serve as synthons for generating heterobimetallic oxo-bridged dimetal complexes by reaction with divalent metal complexes. The formation of Fe III -O-Cr III and Fe III -O-Mn III complexes is described herein. The latter complexes may serve as models for the Fe III -X-Mn III active sites of an emerging class of Fe/Mn enzymes represented by the Class 1c ribonucleotide reductase from Chlamydia trachomatis and the R2-like ligand-binding oxidase (R2lox) found in Mycobacterium tuberculosis. These synthetic complexes have been characterized by UV-Vis, resonance Raman, and X-ray absorption spectroscopy, as well as electrospray mass spectrometry. The Fe III -O-Cr III complexes exhibit a three-band UV-Vis pattern that differs from the simpler features associated with Fe III -O-Fe III complexes. The positions of these features are modulated by the nature of the supporting polydentate ligand on the iron center, and their bands intensify dramatically in two examples upon the binding of an axial cyanate or thiocyanate ligand trans to the oxo bridge. In contrast, the Fe III -O-Mn III complexes resemble Fe III -O-Fe III complexes more closely. Resonance Raman characterization of the Fe III -O-M III complexes reveals an 18 O-sensitive vibration in the range of 760-890 cm -1 . This feature has been assigned to the asymmetric Fe III -O-M III stretching mode and correlates reasonably with the Fe-O bond distance determined by EXAFS analysis. The likely binding of an acetate as a bridging ligand to the Fe III -O-Mn III complex 12 lays the foundation for further efforts to model the heterobimetallic active sites of Fe/Mn enzymes.

Age, extraction rate and jaw surgery rate in Korean orthodontic clinics and small dental hospitals

PubMed Central

2012-01-01

Objective This study aimed to investigate the current data regarding age, sex, and Angle Classification of Korean orthodontic patients and influence of these factors on the tendency to undergo extraction and orthognathic surgery. Methods The recent trends of Korean orthodontic patients were assessed using questionnaire survey. The questionnaires were e-mailed to orthodontists who met the study criteria; 58% of the orthodontists opened the e-mails, and 27.7% replied to the e-mails. In all, the medical records of 11,340 patients who underwent orthodontic treatment at private clinics and small dental hospitals in Korea were analyzed. Results The percentage of female patients in the study sample was 69.6%, and the average age of the patients was 19.87 years. The percentage of patients who were older than 19 years was 50.2%. Class II and Class III malocclusions were noted in 33.6% and 23.6% of patients, respectively. Extraction and orthognathic surgery were performed in 60.4% and 6.9% of patients, respectively. Conclusions The results showed that there were a high percentage of adult, Class II malocclusion and extraction patients in private practices and small dental hospitals during the study period. Further, a relatively high proportion of adult patients opted to undergo orthognathic surgery. PMID:23112936

40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM 2.5 Candidate...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM 2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53...

40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM 2.5 Candidate...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM 2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53...

A benefit-risk assessment of class III antiarrhythmic agents.

PubMed

Brendorp, Bente; Pedersen, Oledyg; Torp-Pedersen, Christian; Sahebzadah, Naji; Køber, Lars

2002-01-01

With beta-blockers as the exception, increasing doubt is emerging on the value of antiarrhythmic drug therapy following a series of trials that have either shown no mortality benefit or even an excess mortality. Vaughan Williams class I drugs are generally avoided in patients with structural heart disease, and class IV drugs are avoided in heart failure. Unfortunately, arrhythmias are a growing problem due to an increase in the incidence of atrial fibrillation and sudden death. The population is becoming older and more patients survive for a longer time period with congestive heart failure, which again increases the frequency of both supraventricular as well as ventricular arrhythmias. Class III antiarrhythmic drugs act by blocking repolarising currents and thereby prolong the effective refractory period of the myocardium. This is believed to facilitate termination of re-entry tachyarrhythmias. This class of drugs is developed for treatment of both supraventricular and ventricular arrhythmias. Amiodarone, sotalol, dofetilide, and ibutilide are examples of class III drugs that are currently available. Amiodarone and sotalol have other antiarrhythmic properties in addition to pure class III action, which differentiates them from the others. However, all have potential serious adverse events. Proarrhythmia, especially torsade de pointes, is a common problem making the benefit-risk ratio of these drugs a key question. Class III drugs have been evaluated in different settings: primary and secondary prevention of ventricular arrhythmias and in treatment of atrial fibrillation or flutter. Based on existing evidence there is no routine indication for antiarrhythmic drug therapy other than beta-blockers in patients at high risk of sudden death. Subgroup analyses of trials with amiodarone and dofetilide suggest that patients with atrial fibrillation may have a mortality reduction with these drugs. However, this needs to be tested in a prospective trial. Similarly, subgroups that will benefit from prophylactic treatment with class III antiarrhythmic drugs may be found based on QT-intervals or - in the future - from genetic testing. Class III drugs are effective in converting atrial fibrillation to sinus rhythm and for the maintenance of sinus rhythm after conversion. This is currently by far the most important indication for this class of drugs. As defined by recent guidelines, amiodarone and dofetilide have their place as second-line therapy except for patients with heart failure where they are first line therapy being the only drugs where the safety has been documented for this group of high risk patients.

49 CFR 572.127 - Test conditions and instrumentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Forces—Class 1000; (ii) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation—Class 60 (if used). (3) Thorax: (i) Rib acceleration—Class 1000; (ii) Spine and pendulum accelerations—Class...

49 CFR 572.127 - Test conditions and instrumentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Forces—Class 1000; (ii) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation—Class 60 (if used). (3) Thorax: (i) Rib acceleration—Class 1000; (ii) Spine and pendulum accelerations—Class...

49 CFR 572.127 - Test conditions and instrumentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Forces—Class 1000; (ii) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation—Class 60 (if used). (3) Thorax: (i) Rib acceleration—Class 1000; (ii) Spine and pendulum accelerations—Class...

49 CFR 572.127 - Test conditions and instrumentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Forces—Class 1000; (ii) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation—Class 60 (if used). (3) Thorax: (i) Rib acceleration—Class 1000; (ii) Spine and pendulum accelerations—Class...

49 CFR 572.127 - Test conditions and instrumentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Forces—Class 1000; (ii) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation—Class 60 (if used). (3) Thorax: (i) Rib acceleration—Class 1000; (ii) Spine and pendulum accelerations—Class...

The New Class of Layered Iii-Vi Diluted Magnetic Semiconductors and Their Magnetic MEASUREMENTS*

NASA Astrophysics Data System (ADS)

Pekarek, T. M.; Maymi, C.; Watson, E.; Fuller, C. L.; Garner, J. L.; Crooker, B. C.; Miotkowski, I.; Ramdas, A. K.

2002-03-01

A new class of diluted magnetic semiconductors (DMS) based on III-VI semiconductor hosts has been studied. To date three III-VI DMS systems have been investigated (Ga1-xMnxS, Ga1-xMnxSe, and Ga1-xFexSe). Magnetization measurements on all three systems will be presented. Recent theoretical calculations (based on a Hamiltonian including crystal-field, spin-orbit, spin-spin, and Zeeman terms) have been made for Ga1-xMnxS showing excellent agreement with the experimental data. This establishes Ga1-xMnxS as the first III-VI DMS to be understood both experimentally and theoretically. This new class of III-VI DMS complements the more extensive work on II-VI DMS and III-V DMS. *Support: Research Corporation Cottrell College Science Awards CC4719, CC4845, and CC4668, FL Space Grant Consortium, NHMFL, Purdue Academic Reimbursement Grant, and NSF No. DMR-99-72196, DMR-99-75887, DMR-01-02699, and ECS-01-29853.

Genomic localization of the human gene encoding Dr1, a negative modulator of transcription of class II and class III genes.

PubMed

Purrello, M; Di Pietro, C; Rapisarda, A; Viola, A; Corsaro, C; Motta, S; Grzeschik, K H; Sichel, G

1996-01-01

Dr1 is a nuclear protein of 19 kDa that exists in the nucleoplasm as a homotetramer. By binding to TBP (the DNA-binding subunit of TFIID, and also a subunit of SL1 and TFIIIB), the protein blocks class II and class III preinitiation complex assembly, thus repressing the activity of the corresponding promoters. Since transcription of class I genes is unaffected by Dr1. it has been proposed that the protein may coordinate the expression of class I, class II and class III genes. By somatic cell genetics and fluorescence in situ hybridization, we have localized the gene (DR1), present in the genome of higher eukaryotes as a single copy, to human chromosome region 1p21-->p13. The nucleotide sequence conservation of the coding segment of the gene, as determined by Noah's ark blot analysis, and its ubiquitous transcription suggest that Dr1 has an important biological role, which could be related to the negative control of cell proliferation.

Determination of detonation wave boundary angles via hydrocode simulations using CREST

NASA Astrophysics Data System (ADS)

Whitworth, N. J.; Childs, M.

2017-01-01

A key input parameter to Detonation Shock Dynamics models is the angle that the propagating detonation wave makes with the charge edge. This is commonly referred to as the boundary angle, and is a property of the explosive/confiner material combination. Such angles can be determined: (i) experimentally from measured detonation wave-shapes, (ii) theoretically, or (iii) via hydrocode simulations using a reactive burn model. Of these approaches: (i) is difficult because of resolution, (ii) breaks down for certain configurations, while (iii) requires a well validated model. In this paper, the CREST reactive burn model, which has previously been successful in modelling a wide range of explosive phenomena, is used to simulate recent Detonation Confinement Sandwich Tests conducted at LANL using the insensitive high explosive PBX 9502. Simulated detonation wave-shapes in PBX 9502 for a number of different confiner materials and combinations closely match those recorded from the experiments. Boundary angles were subsequently extracted from the simulated results via a wave-shape analysis toolkit. The results shown demonstrate the usefulness of CREST in determining detonation wave boundary angles for a range of explosive/confiner material combinations.

Changes in Cranial Base Morphology in Class I and Class II Division 1 Malocclusions

PubMed Central

Agarwal, Anirudh; Pandey, Harsh; Bajaj, Kamal; Pandey, Lavesh

2013-01-01

Introduction: The cranial base plays a key role in craniofacial growth; it helps to integrate spatially and functionally different patterns of growth in various adjoining regions of the skull such as components of the brain, the nasal and oral cavity and the pharynx. The aim of this study was to evaluate the difference in cranial base flexure between skeletal and dental Class I and Class II division 1. Materials & Methods: Lateral cephalometric radiograph, of Class I and Class II with an average growth pattern were analyzed and compared. A total of 103 patients having class I (n=52) and class II (n=51) malocclusion, were taken from Department of Orthodontics, Rajasthan Dental College & Hospital, Jaipur. Cranial base angle (N-S-Ar) and ANB were measured on pre treatment lateral cephalograms. Results: In this study cranial base angle did not show statistically significant difference between the two groups studied. Conclusion: In the assessment of orthodontic problems involving anteroposterior malrelationships of the jaws, the problem is usually the result of size, form and position of the jaw. The present study failed to find any differences in cranial base angle between sagittal malocclusions. How to cite this article: Agarwal A, Pandey H, Bajaj K, Pandey L. Changes in Cranial Base Morphology in Class I and Class II Division 1 Malocclusion. J Int Oral Health 2013; 5(1):39-42. PMID:24155576

Evaluation of skeletal and dental asymmetries in Angle Class II subdivision malocclusions with cone-beam computed tomography.

PubMed

Minich, Craig M; Araújo, Eustáquio A; Behrents, Rolf G; Buschang, Peter H; Tanaka, Orlando M; Kim, Ki Beom

2013-07-01

The purpose of this study was to determine whether Angle Class II subdivision malocclusions have skeletal or dental asymmetries between the Class II and Class I sides. A sample of 54 untreated Angle Class II subdivision patients with pretreatment photos and cone-beam computed tomography (CBCT) scans was used. The photos were used to identify the Class II subdivision malocclusion and to record the amount of crowding per quadrant. Landmarks were plotted on each CBCT volume so that direct 3-dimensional measurements could be made to compare the positions and dimensions of the skeletal and dental structures on the Class II side vs the Class I side. Significant differences were found for 2 skeletal measurements: the position of the maxilla relative to the cranial base, and the mandibular dimension from the mandibular foramen to the mental foramen. Statistically significant dental differences were found for the position of the mandibular first molars and canines in relation to the maxilla and the mandible. Statistically significant differences were found for the maxillary first molars and canines in relation to the mandible. There were significant skeletal and dental differences between the Class I and Class II sides. The dental asymmetries accounted for about two thirds of the total asymmetry. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

76 FR 43701 - Renewal of Agency Information Collection for Class III Tribal State Gaming Compact Process...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... Compact Process. The information collection is currently authorized by OMB Control Number 1076-0172, which... OMB Control Number: 1076-0172. Title: Class III Tribal State Gaming Compact Process, 25 CFR 293. Brief...

Two-Step Extraction of the Lower First Molar for Class III Treatment in Adult Patient.

PubMed

Almeida, Kélei Cristina de Mathias; Paulin, Ricardo Fabris; Raveli, Taísa Barnabé; Raveli, Dirceu Barnabé; Santos-Pinto, Ary

2016-01-01

The aim of this article is to describe a case report of Class III malocclusion treatment with lower first molar extraction. The 27-year-old Caucasian male patient presented a symmetric face with a straight profile, hyperdivergent growth pattern, molar and cuspid Class III relation, and an anterior crossbite as well as a mild crowding on cuspids area, in both upper and lower arches and a tendency to posterior crossbite. The treatment was performed by the use of Haas expansion appliance followed by an initial alignment and leveling of the upper and lower arches with a fixed edgewise appliance, extraction of lower teeth aiming the correction of the incisors proclination and end the treatment with a Class I molar relationship. It resulted in a significant change in the patient's profile, dentoalveolar Class III correction, upper arch expansion, leveling and alignment of the upper and lower arches, and improvement of tipping of the upper and lowers incisors. In cases of a dentoalveolar compensation in well positioned bone bases the treatment with fixed appliances is an alternative and extraction of lower teeth is considered.

Redo surgery risk in patients with cardiac prosthetic valve dysfunction

PubMed Central

Maciejewski, Marek; Piestrzeniewicz, Katarzyna; Bielecka-Dąbrowa, Agata; Piechowiak, Monika; Jaszewski, Ryszard

2011-01-01

Introduction The aim of the study was to analyse the risk factors of early and late mortality in patients undergoing the first reoperation for prosthetic valve dysfunction. Material and methods A retrospective observational study was performed in 194 consecutive patients (M = 75, F = 119; mean age 53.2 ±11 years) with a mechanical prosthetic valve (n = 103 cases; 53%) or bioprosthesis (91; 47%). Univariate and multivariate Cox statistical analysis was performed to determine risk factors of early and late mortality. Results The overall early mortality was 18.6%: 31.4% in patients with symptoms of NYHA functional class III-IV and 3.4% in pts in NYHA class I-II. Multivariate analysis identified symptoms of NYHA class III-IV and endocarditis as independent predictors of early mortality. The overall late mortality (> 30 days) was 8.2% (0.62% year/patient). Multivariate analysis identified age at the time of reoperation as a strong independent predictor of late mortality. Conclusions Reoperation in patients with prosthetic valves, performed urgently, especially in patients with symptoms of NYHA class III-IV or in the case of endocarditis, bears a high mortality rate. Risk of planned reoperation, mostly in patients with symptoms of NYHA class I-II, does not differ from the risk of the first operation. PMID:22291767

The Populus class III HD ZIP, popREVOLUTA, influences cambium initiation and patterning of woody stems.

PubMed

Robischon, Marcel; Du, Juan; Miura, Eriko; Groover, Andrew

2011-03-01

The secondary growth of a woody stem requires the formation of a vascular cambium at an appropriate position and proper patterning of the vascular tissues derived from the cambium. Class III homeodomain-leucine zipper (HD ZIP) transcription factors have been implicated in polarity determination and patterning in lateral organs and primary vascular tissues and in the initiation and function of shoot apical meristems. We report here the functional characterization of a Populus class III HD ZIP gene, popREVOLUTA (PRE), that demonstrates another role for class III HD ZIPs in regulating the development of cambia and secondary vascular tissues. PRE is orthologous to Arabidopsis (Arabidopsis thaliana) REVOLUTA and is expressed in both the shoot apical meristem and in the cambial zone and secondary vascular tissues. Transgenic Populus expressing a microRNA-resistant form of PRE presents unstable phenotypic abnormalities affecting both primary and secondary growth. Surprisingly, phenotypic changes include abnormal formation of cambia within cortical parenchyma that can produce secondary vascular tissues in reverse polarity. Genes misexpressed in PRE mutants include transcription factors and auxin-related genes previously implicated in class III HD ZIP functions during primary growth. Together, these results suggest that PRE plays a fundamental role in the initiation of the cambium and in regulating the patterning of secondary vascular tissues.

Influencing factors of NT-proBNP level inheart failure patients with different cardiacfunctions and correlation with prognosis.

PubMed

Xu, Liang; Chen, Yanchun; Ji, Yanni; Yang, Song

2018-06-01

Factors influencing N-terminal pro-brain natriuretic peptide (NT-proBNP) level in heart failure patients with different cardiac functions were identified to explore the correlations with prognosis. Eighty heart failure patients with different cardiac functions treated in Yixing People's Hospital from January 2016 to June 2017 were selected, and divided into two groups (group with cardiac function in class II and below and group with cardiac function in class III and above), according to the cardiac function classification established by New York Heart Association (NYHA). Blood biochemical test and outcome analysis were conducted to measure serum NT-proBNP and matrix metalloproteinase-9 (MMP-9) levels in patients with different cardiac functions, and correlations between levels of NT-proBNP and MMP-9 and left ventricular ejection fraction (LVEF) level were analyzed in patients with different cardiac functions at the same time. In addition, risk factors for heart failure in patients with different cardiac functions were analyzed. Compared with the group with cardiac function in class III and above, the group with cardiac function in class II and below had significantly lower serum NT-proBNP and MMP-9 levels (p<0.05). For echocardiogram indexes, left ventricular end-diastolic diameter (LVEDD) and left ventricular end-systolic diameter (LVESD) in the group with cardiac function in class II and below were obviously lower than those in the group with cardiac function in class III and above (p<0.05), while LVEF was higher in group with cardiac function in class II and below than that in group with cardiac function in class III and above (p<0.05). NT-proBNP and MMP-9 levels were negatively correlated with LVEF level [r=-0.8517 and -0.8517, respectively, p<0.001 (<0.05)]. Cardiac function in class III and above, increased NT-proBNP, increased MMP-9 and decreased LVEF were relevant risk factors and independent risk factors for heart failure in patients with different cardiac functions. NT-proBNP and MMP-9 levels are negatively correlated with LVEF in patients regardless of the cardiac function class. Therefore, attention should be paid to patients who have cardiac function in class III and above, increased NT-proBNP and MMP-9 levels and decreased LVEF in clinical practices, so as to actively prevent and treat heart failure.

40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part 53... Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53—Illustration...

40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM 10-2,5 Candidate...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM 10-2,5 Candidate Equivalent Methods C Figure C-3 to Subpart C of... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM10−2.5 Candidate...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM10â2.5 Candidate Equivalent Methods C Figure C-3 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM10−2.5 Candidate...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM10â2.5 Candidate Equivalent Methods C Figure C-3 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part 53... Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53—Illustration...

40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM 10-2.5 Candidate...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM 10-2.5 Candidate Equivalent Methods C Figure C-3 to Subpart C of... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part 53... Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53—Illustration...

40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM10−2.5 Candidate...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM10â2.5 Candidate Equivalent Methods C Figure C-3 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

Three-dimensional assessment of mandibular and glenoid fossa changes after bone-anchored Class III intermaxillary traction

PubMed Central

De Clerck, Hugo; Nguyen, Tung; de Paula, Leonardo Koerich; Cevidanes, Lucia

2013-01-01

Introduction Conventional treatment for young Class III patients involves extraoral devices designed to either protract the maxilla or restrain mandibular growth. The use of skeletal anchorage offers a promising alternative to obtain orthopedic results with fewer dental compensations. Our aim was to evaluate 3-dimensional changes in the mandibles and the glenoid fossae of Class III patients treated with bone-anchored maxillary protraction. Methods Twenty-five consecutive skeletal Class III patients between the ages of 9 and 13 years (mean age, 11.10 ± 1.1 year) were treated with Class III intermaxillary elastics and bilateral miniplates (2 in the infrazygomatic crests of the maxilla and 2 in the anterior mandible). The patients had cone-beam computed tomography images taken before initial loading and at the end of active treatment. Three-dimensional models were generated from these images, registered on the anterior cranial base, and analyzed by using color maps. Results Posterior displacement of the mandible at the end of treatment was observed in all subjects (posterior ramus: mean, 2.74 ± 1.36 mm; condyles: mean, 2.07 ± 1.16 mm; chin: mean, −0.13 ± 2.89 mm). Remodeling of the glenoid fossa at the anterior eminence (mean, 1.38 ± 1.03 mm) and bone resorption at the posterior wall (mean, −1.34 ± 0.6 mm) were observed in most patients. Conclusions This new treatment approach offers a promising alternative to restrain mandibular growth for Class III patients with a component of mandibular prognathism or to compensate for maxillary deficiency in patients with hypoplasia of the midface. Future studies with long-term follow-up and comparisons with facemask and chincup therapies are needed to better understand the treatment effects. PMID:22748987

Thin-plate spline analysis of mandibular morphological changes induced by early class III treatment: a long-term evaluation.

PubMed

Franchi, Lorenzo; Pavoni, Chiara; Cerroni, Silvia; Cozza, Paola

2014-08-01

To evaluate the long-term mandibular morphological changes induced by early treatment of class III malocclusion with rapid maxillary expansion (RME) and facial mask (FM). Twenty-five subjects [10 boys, 15 girls; mean age at T1 (start of treatment) 9.3±1.6 years] with class III disharmony were treated with RME and FM therapy followed by fixed appliances. The patients were re-evaluated at the end of growth (T2), about 8.5 years after the end of the treatment (mean age, 18.6±2.0 years). Sixteen subjects with untreated class III malocclusion comprised the control group. Mandibular shape changes were analysed on the lateral cephalograms of the subjects of both groups by means of thin-plate spline (TPS) analysis. Procrustes average mandibular configurations were subjected to TPS analysis by means of both cross-sectional between-group comparisons at T1 and at T2 and longitudinal within-group comparisons. Statistical analysis of shape differences was performed using a generalized Goodall F test. In the long term, the treated group exhibited a significant upward and forward direction of condylar growth. On the contrary, untreated class III subjects showed an upward and backward direction of condylar growth associated with a downward and forward deformation of the mandibular symphysis. Limitations are related to the small sample size of both treated and control groups and to the retrospective nature of the study. Early treatment of class III malocclusion with RME and FM is able to produce significant and favourable long-term mandibular shape changes characterized by an anterior morphogenetic rotation. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Management of skeletal Class III malocclusion with face mask therapy and comprehensive orthodontic treatment.

PubMed

Muthukumar, Kirthika; Vijaykumar, N M; Sainath, M C

2016-01-01

Orthopedic correction of skeletal Class III malocclusion in a growing patient is crucial as it can circumvent future surgical procedures. Further, as surgery is done only at a later stage, early treatment helps to avoid the detrimental effects produced by the facial disfigurement on the patient's social life. This case report describes the treatment of a child aged 9 years 6 months who had a skeletal Class III malocclusion. The treatment plan involved the use of a reverse pull headgear (facemask) and multibracket appliance therapy resulting in successful correction of the malocclusion. The treatment results were highly satisfactory resulting in improved facial esthetics, a skeletal Class I with a Dental Class I molar and canine relationship, an ideal overjet and overbite. Thus, dentoalveolar camouflage, if done in properly selected cases, alleviates the need for surgical intervention. The patient is being monitored until the end of growth to ensure the stability of treatment results.

NEAs: Phase Angle Dependence of Asteroid Class and Diameter from Observational Studies

NASA Astrophysics Data System (ADS)

Wooden, Diane H.; Lederer, Susan M.; Bus, Schelte; Tokunaga, Alan; Jehin, Emmanuel; Howell, Ellen S.; Nolan, Michael C.; Ryan, Erin; Fernandez, Yan; Harker, David; Reddy, Vishnu; Benner, Lance AM; Lovell, Amy; Moskovitz, Nicholas; Kerr, Tom; Woodward, Charles

2015-08-01

We will discuss the results of a planned observation campaign of Near Earth Asteroids (NEAs), 1999 CU3, 2002 GM2, 2002 FG7, and 3691 Bede with instruments on the United Kingdom Infrared Telescope (UKIRT) from 15-Mar-2015 to 28-April 2015 UT. We will study the phase-angle dependence of the reflectance and thermal emission spectra. Recent publications reveal that the assignment of the asteroid class from visible and near-IR spectroscopy can change with phase angle for NEAs with silicate-bearing minerals on their surfaces (S-class asteroids) (Thomas et al. 2014, Icarus 228, 217; Sanchez et al. 2012 Icarus 220, 36). Only three of the larger NEAs have been measured at a dozen phase angles and the trends are not all the same, so there is not yet enough information to create a phase-angle correction. Also, the phase angle effect is not characterized well for the thermal emission including determination of the albedo and the thermal emission. The few NEAs were selected for our study amongst many possible targets based on being able to observe them through a wide range of phase angles, ranging from less than about 10 degrees to greater than 45 degrees over the constrained date range. The orbits of NEAs often generate short observing windows at phase angles higher than 45 deg (i.e., whizzing by Earth and/or close to dawn or dusk). Ultimately, lowering the uncertainty of the translation of asteroid class to meteorite analog and of albedo and size determinations are amongst our science goals. On a few specific nights, we plan to observe the 0.75-2.5 micron spectra with IRTF+SpeX for comparison with UKIRT data including 5-20 micron with UKIRT+UIST/Michelle to determine as best as possible the albedos. To ensure correct phasing of spectroscopic data, we augment with TRAPPIST-telescope light curves and R-band guider image data. Our observations will contribute to understanding single epoch mid-IR and near-IR measurements to obtain albedo, size and IR beaming parameters (the outcomes of thermal models) and asteroid spectral class.

NEAs: Phase Angle Dependence of Asteroid Class and Diameter from Observational Studies

NASA Technical Reports Server (NTRS)

Wooden, Diane H.; Lederer, Susan M.; Bus, Schlete; Tokunaga, Alan; Jehin, Emmanuel; Howell, Ellen S.; Nolan, Michael C.; Ryan, Erin; Fernandez, Yan; Harker, David;

Simultaneous small- and wide-angle scattering at high X-ray energies.

PubMed

Daniels, J E; Pontoni, D; Hoo, Rui Ping; Honkimäki, V

2010-07-01

Combined small- and wide-angle X-ray scattering (SAXS/WAXS) is a powerful technique for the study of materials at length scales ranging from atomic/molecular sizes (a few angstroms) to the mesoscopic regime ( approximately 1 nm to approximately 1 microm). A set-up to apply this technique at high X-ray energies (E > 50 keV) has been developed. Hard X-rays permit the execution of at least three classes of investigations that are significantly more difficult to perform at standard X-ray energies (8-20 keV): (i) in situ strain analysis revealing anisotropic strain behaviour both at the atomic (WAXS) as well as at the mesoscopic (SAXS) length scales, (ii) acquisition of WAXS patterns to very large q (>20 A(-1)) thus allowing atomic pair distribution function analysis (SAXS/PDF) of micro- and nano-structured materials, and (iii) utilization of complex sample environments involving thick X-ray windows and/or samples that can be penetrated only by high-energy X-rays. Using the reported set-up a time resolution of approximately two seconds was demonstrated. It is planned to further improve this time resolution in the near future.

[Prevalence of cross-bite in Mexican children].

PubMed

Ojeda León, S; De la Teja Angeles, E

1990-10-01

As observed, the problem of lining and accommodation of teeth in the child population is increasingly larger. This fact prompted the authors to attempt determining the prevalence of cross-bite in a sample of Mexican children. A total of 306 patients, aged between two and 17 and attending the Stomatology service of the National Institute of Pediatrics, were evaluated, from which all pertinent data regarding age, sex, molar-temporal relationship (terminal, rectus, distal, messial and exaggerated messial planes), permanent molar status (Angle I, II, III), cross-bite, type of dentition affected (primary, mixed or permanent), cross-bite classification (anterior, posterior or mixed), whether unilateral, bilateral, dental or skeletal, right or left, and number of teeth affected, were duly recorded. Out of 306 evaluated patients (160 males, 146 female), 112 evidenced cross-bite (36.6%), 56 of each sex; in 69.6% the teeth were anterior, in 17.8% they were posterior, and in 15.5% their position was mixed. Their average age was 8 years, and malocclusion was Angle class I. From this experience, it is to be concluded that early detection and correction of any dental occlusion abnormality will permit correcting defects in dentofacial development; it is thus necessary to ascertain the frequency of cross-bite.

Chracterization of class III peroxidases from switchgrass

USDA-ARS?s Scientific Manuscript database

Class III peroxidases (CIIIPRX) catalyze the oxidation of monolignols, generate radicals, and ultimately lead to the formation of lignin. In general, CIIIPRX genes encode a large number of isozymes with ranges of in vitro substrate specificities. In order to elucidate the mode of substrate specifici...

Crystal structure of class III chitinase from pomegranate provides the insight into its metal storage capacity.

PubMed

Masuda, Taro; Zhao, Guanghua; Mikami, Bunzo

2015-01-01

Chitinase hydrolyzes the β-1,4-glycosidic bond in chitin. In higher plants, this enzyme has been regarded as a pathogenesis-related protein. Recently, we identified a class III chitinase, which functions as a calcium storage protein in pomegranate (Punica granatum) seed (PSC, pomegranate seed chitinase). Here, we solved a crystal structure of PSC at 1.6 Å resolution. Although its overall structure, including the structure of catalytic site and non-proline cis-peptides, was closely similar to those of other class III chitinases, PSC had some unique structural characteristics. First, there were some metal-binding sites with coordinated water molecules on the surface of PSC. Second, many unconserved aspartate residues were present in the PSC sequence which rendered the surface of PSC negatively charged. This acidic electrostatic property is in contrast to that of hevamine, well-characterized plant class III chitinase, which has rather a positively charged surface. Thus, the crystal structure provides a clue for metal association property of PSC.

Aesthetic and functional outcomes using a multiloop edgewise archwire for camouflage orthodontic treatment of a severe Class III open bite malocclusion.

PubMed

Marañón-Vásquez, Guido Artemio; Soldevilla Galarza, Luciano Carlos; Tolentino Solis, Freddy Antonio; Wilson, Cliff; Romano, Fábio Lourenço

2017-09-01

Occasionally, orthodontists will be challenged to treat malocclusions and skeletal disharmonies, which by their complexity one might think that the only treatment alternative is the surgical-orthodontic approach. A male patient, aged 17 years old, was diagnosed with a skeletal Class III malocclusion, anterior open bite and negative overjet. An unpleasant profile was the patient's 'chief complaint' showing interest in facial aesthetics improvement. Nevertheless, the patient and his parents strongly preferred a non-surgical treatment approach. He was treated with a multiloop edgewise archwire to facilitate uprighting and distal en-masse movement of lower teeth, correct the Class III open bite malocclusion, change the inclination of the occlusal plane and obtain the consequent morphological-functional adaptation of the mandible. The Class III malocclusion was corrected and satisfactory changes in the patient's profile were obtained. Active treatment was completed in 2 years, and facial result remained stable at 2 years 6 months after debonding.

Morphometric analysis of treatment effects of bone-anchored maxillary protraction in growing Class III patients

PubMed Central

De Clerck, H. J.; Cevidanes, L. H.; Franchi, L.

2011-01-01

The aim of the present morphometric investigation was to evaluate the effects of bone-anchored maxillary protraction (BAMP) in the treatment of growing patients with Class III malocclusion. The shape and size changes in the craniofacial configuration of a sample of 26 children with Class III malocclusions consecutively treated with the BAMP protocol were compared with a matched sample of 15 children with untreated Class III malocclusions. All subjects in the two groups were at a prepubertal stage of skeletal development at time of first observation. Average duration of treatment was 14 months. Significant treatment-induced modifications involved both the maxilla and the mandible. The most evident deformation consisted of marked forward displacement of the maxillary complex with more moderate favourable effects in the mandible. Deformations in the vertical dimension were not detected. The significant deformations were associated with significant differences in size in the group treated with the BAMP protocol. PMID:21187527

ALMA Observations of Polarization from Dust Scattering in the IM Lup Protoplanetary Disk

NASA Astrophysics Data System (ADS)

Hull, Charles L. H.; Yang, Haifeng; Li, Zhi-Yun; Kataoka, Akimasa; Stephens, Ian W.; Andrews, Sean; Bai, Xuening; Cleeves, L. Ilsedore; Hughes, A. Meredith; Looney, Leslie; Pérez, Laura M.; Wilner, David

2018-06-01

We present 870 μm ALMA observations of polarized dust emission toward the Class II protoplanetary disk IM Lup. We find that the orientation of the polarized emission is along the minor axis of the disk, and that the value of the polarization fraction increases steadily toward the center of the disk, reaching a peak value of ∼1.1%. All of these characteristics are consistent with models of self-scattering of submillimeter-wave emission from an optically thin inclined disk. The distribution of the polarization position angles across the disk reveals that, while the average orientation is along the minor axis, the polarization orientations show a significant spread in angles; this can also be explained by models of pure scattering. We compare the polarization with that of the Class I/II source HL Tau. A comparison of cuts of the polarization fraction across the major and minor axes of both sources reveals that IM Lup has a substantially higher polarization fraction than HL Tau toward the center of the disk. This enhanced polarization fraction could be due a number of factors, including higher optical depth in HL Tau, or scattering by larger dust grains in the more evolved IM Lup disk. However, models yield similar maximum grain sizes for both HL Tau (72 μm) and IM Lup (61 μm, this work). This reveals continued tension between grain-size estimates from scattering models and from models of the dust emission spectrum, which find that the bulk of the (unpolarized) emission in disks is most likely due to millimeter-sized (or even centimeter-sized) grains.

Influence of pharyngeal airway respiration pressure on Class II mandibular retrusion in children: A computational fluid dynamics study of inspiration and expiration.

PubMed

Iwasaki, T; Sato, H; Suga, H; Takemoto, Y; Inada, E; Saitoh, I; Kakuno, K; Kanomi, R; Yamasaki, Y

2017-05-01

To examine the influence of negative pressure of the pharyngeal airway on mandibular retraction during inspiration in children with nasal obstruction using the computational fluid dynamics (CFD) method. Sixty-two children were divided into Classes I, II (mandibular retrusion) and III (mandibular protrusion) malocclusion groups. Cone-beam computed tomography data were used to reconstruct three-dimensional shapes of the nasal and pharyngeal airways. Airflow pressure was simulated using CFD to calculate nasal resistance and pharyngeal airway pressure during inspiration and expiration. Nasal resistance of the Class II group was significantly higher than that of the other two groups, and oropharyngeal airway inspiration pressure in the Class II (-247.64 Pa) group was larger than that in the Class I (-43.51 Pa) and Class III (-31.81 Pa) groups (P<.001). The oropharyngeal airway inspiration-expiration pressure difference in the Class II (-27.38 Pa) group was larger than that in the Class I (-5.17 Pa) and Class III (0.68 Pa) groups (P=.006). Large negative inspiratory pharyngeal airway pressure due to nasal obstruction in children with Class II malocclusion may be related to their retrognathia. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Prevalence of Malocclusion among 6 to 10 Year old Nalgonda School Children

PubMed Central

Reddy, E Rajendra; Manjula, M; Sreelakshmi, N; Rani, S Thabitha; Aduri, Rajesh; Patil, B Dharamraj

2013-01-01

Background: To evaluate the prevalence of malocclusion among 6 to 10 year old children of Nalgonda District. Materials & Methods: A total of 3000 children were examined, out of which 2135 children (1009 boys and 1126 girls) who fulfilled the inclusion criteria were included. The selected sample was examined for Class I, Class II, Class III molar relationship, lower anterior crowding, cross bite (anterior and posterior), open bite, and pseudo class III [edge to edge bite] discrepancies after obtaining the written consent from the concerned school authorities. The collected data was tabulated and statistically analysed using chi-square test. Results: Among the selected sample, 648 (30.35%) children had minor tooth alignment discrepancies. Angle’s Class I molar relation with and without minor discrepancies was observed in 78.6%, Class II in 13.9%, Class III in 7.8% of the subjects surveyed. Lower anterior crowding in 11.8%, anterior cross bite in 4.5%, posterior cross bite in 3.75%, openbite in 3% and Pseudo class III [edge to edge] in 5.97% was noticed among the studied population. There was no statistical significant difference observed gender wise. Conclusion: In the current study, 52% of the studied population had malocclusion with a higher prevalence of Angle’s Class I molar relation with lower anterior crowding. How to cite this article: Reddy ER, Manjula M, Sreelakshmi N, Rani ST, Aduri R, Patil BD. Prevalence of Malocclusion among 6 to 10 Year old Nalgonda School Children. J Int Oral Health 2013; 5(6):49-54 . PMID:24453444

Management of severe skeletal Class III malocclusion with bimaxillary orthognathic surgery

PubMed Central

Haryani, Jitesh; Nagar, Amit; Mehrotra, Divya; Ranabhatt, Rani

2016-01-01

Orthognathic surgery in conjunction with fixed orthodontics is a common indication for interdisciplinary management of severe skeletal Class III malocclusion. A thorough analysis of pretreatment investigations and development of a surgical visual treatment objective is essential to plan the type of surgical technique required. Bimaxillary orthognathic surgery is the most common type of surgical procedure for severe skeletal discrepancies. The present case report is a combined ortho-surgical team management of a skeletally Class III patient. The severity of the case required bilateral upper first premolar extraction for dentoalveolar decompensation and simultaneous “Two-jaw surgery” with maxillary advancement of 4 mm and mandibular setback of 7 mm. Postsurgery, a pleasing good facial profile was achieved with Class II molar relation and positive overjet. PMID:27994433

Note: Comparison of grazing incidence small angle x-ray scattering of a titania sponge structure at the beamlines BW4 (DORIS III) and P03 (PETRA III)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rawolle, M.; Koerstgens, V.; Ruderer, M. A.

2012-10-15

Grazing incidence small angle x-ray scattering (GISAXS) is a powerful technique for morphology investigation of nanostructured thin films. GISAXS measurements at the newly installed P03 beamline at the storage ring PETRA III in Hamburg, Germany, are compared to the GISAXS data from the beamline BW4 at the storage ring DORIS III, which had been used extensively for GISAXS investigations in the past. As an example, a titania thin film sponge structure is investigated. Compared to BW4, at beamline P03 the resolution of larger structures is slightly improved and a higher incident flux leads to a factor of 750 in scatteredmore » intensity. Therefore, the acquisition time in GISAXS geometry is reduced significantly at beamline P03.« less

Class III malocclusion treated with distalization of the mandibular dentition with miniscrew anchorage: A 2-year follow-up.

PubMed

Chen, Kun; Cao, Yang

2015-12-01

This case report describes the orthodontic camouflage treatment for a 16-year-old Chinese girl with a Class III malocclusion. The treatment included extractions of the mandibular second molars, fixed appliance therapy, and miniscrew-aided mandibular arch distalization. Pretreatment, posttreatment, and 2-year follow-up records are shown. The anterior negative overjet and the Class III molar and canine relationships were corrected. The patient's facial profile was greatly improved. The mandibular third molars erupted into the second molar spaces, with acceptable intercuspation with the maxillary dentition. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Factors associated with outcomes and inpatient 90-day cost of care in endometrial cancer patients undergoing hysterectomy - implications for bundled care payments.

PubMed

Rolston, Aimee; Spencer, Ryan J; Kevin Reynolds, R; Rice, Laurel W; Uppal, Shitanshu

2018-05-16

To investigate the association of obesity and other comorbidities as well as route of surgery with postoperative outcomes, as well as 30- and 90-day inpatient cost of care after hysterectomy for endometrial cancer. From the 2013 National Readmission Database release, patients who underwent hysterectomy for endometrial cancer were included. Obesity was classified as non-obese (body mass index [BMI] < 35 kg/m 2 ); class I/II obesity (BMI ≥ 35 but <40 kg/m 2 and without obesity related medical condition qualifying it as morbid obesity), class III obesity (BMI ≥ 40 kg/m 2 OR BMI ≥ 35 kg/m 2 with an obesity-related medical condition). Incremental cost at 30 and 90 days was calculated using cost-to-charge ratio. A total of 27,658 patients were identified. Compared to non-obese patients those with class III obesity had higher rate of any medical (non-surgical) complication (22.3% vs 17.2%, p = 0.004), and higher rate of 30-day readmission (6% vs 4.4%, p = 0.003), but similar rates of surgical complications. There were no significant differences in perioperative outcomes between non-obese patients and those with class I/II obesity. Non-obese patients had higher rates of traditional laparoscopy (8.4% vs 13.6%, p < 0.001) and lower conversion rates from a minimally invasive to abdominal (5.5% vs. 8.2%, p < 0.001) than those with class III obesity. Based on multivariate regression model compared to non-obese patients, class I/II obesity (OR 1.05, 95% CI 1.02-1.09) and class III obesity (OR 1.1, 95% CI 1.1-1.18) were associated with higher cost of care. Other factors increasing cost of care included: comorbidity score per unit increase (OR 1.08, 95% 1.07-1.08), insurance status and route of surgery. Class III obesity was associated with higher medical (but not surgical) complication rates as well as increased overall inpatient care cost when compared to the non-obese population. Number of comorbidities significantly impacted the cost and outcomes after hysterectomy. As more healthcare initiatives focus on bundled payments, our results suggest that payment packages should adjust for obesity rates and medical comorbidities stratified by region and hospital type in order to fairly compensate for increased costs of care. Copyright © 2018. Published by Elsevier Inc.

Laser Atherectomy for Treatment of Femoropopliteal In-Stent Restenosis.

PubMed

Armstrong, Ehrin J; Thiruvoipati, Thejasvi; Tanganyika, Kundai; Singh, Gagan D; Laird, John R

2015-08-01

To investigate if laser atherectomy with adjunctive balloon angioplasty can improve endovascular treatment outcomes for femoropopliteal in-stent restenosis (ISR). A dual center study included 135 symptomatic patients (mean age 71 years; 76 men) who underwent endovascular treatment of femoropopliteal ISR between 2006 and 2013. Of these, 54 (40%) were treated with laser atherectomy and the remaining 81 patients with balloon angioplasty alone. Angiographic images were reviewed for lesion morphology and characteristics, TransAtlantic InterSociety Consensus (TASC) II classification, and distal runoff. Class I ISR was defined as focal lesions ≤50 mm, class II ISR as lesions >50 mm, and class III ISR as stent total occlusion. Recurrent ISR was determined by a peak systolic velocity ratio >2.4 by duplex ultrasound. Patients treated with laser atherectomy had longer mean ISR lesion length (222 vs 114 mm, p<0.001) and more class III ISR (69% vs 20%, p=0.001). There was no association between laser atherectomy and rates of recurrent restenosis or occlusion for patients with class I/II ISR, but there was a significantly lower rate of target lesion revascularization at 2 years among patients treated with laser atherectomy (14% vs 44%, p=0.05). In comparison, patients with class III ISR treated with laser atherectomy had lower rates of recurrent restenosis at 1 year (54% vs 91%, p=0.05) and 2 years (69% vs 100%, p=0.05). Patients with class III ISR treated with laser atherectomy also had lower rates of recurrent in-stent occlusion at 2-year follow-up (33% vs 71%, p=0.04). When used to treat complex ISR, including in-stent occlusions, laser atherectomy with adjunctive balloon angioplasty may be associated with improved patency. © The Author(s) 2015.

Long-Term Incisal Relationships After Palatoplasty in Patients With Isolated Cleft Palate.

PubMed

Odom, Elizabeth B; Woo, Albert S; Mendonca, Derick A; Huebener, Donald V; Nissen, Richard J; Skolnick, Gary B; Patel, Kamlesh B

2016-06-01

Various palatoplasty techniques have limited incisions in the hard palate due to concerns that these incisions may limit maxillary growth. There is little convincing long-term evidence to support this. Our purpose is to determine incisal relationships, an indicator for future orthognathic procedure, in patients after repair of an isolated cleft of the secondary palate. Our craniofacial database was used to identify patients aged 10 years or greater with an isolated cleft of the secondary palate who underwent palatoplasty between 1985 and 2002. Data collected included age at palatoplasty and follow-up, cleft type, associated syndrome, Robin sequence, surgeon, repair technique, number of operations, and occlusion. Incisal relationship was determined through clinical observation by a pediatric dentist and orthodontist. Seventy eligible patients operated on by 9 surgeons were identified. Class III incisal relationship was seen in 5 patients (7.1%). Palatoplasty techniques over the hard palate (63 of 70 patients) included 2-flap palatoplasty, VY-pushback, and Von Langenbeck repair. There was an association between class III incisal relationship and syndromic diagnosis (P <0.001). Other study variables were not associated with class III incisal relationships. In patients with an isolated cleft of the secondary palate, there was no association between class III incisal relationship and surgeon, age at repair, cleft type, palatoplasty technique, or number of operations. Increased likelihood of class III incisal relationship was associated primarily with syndromic diagnosis.

Eclipse Shadow from NASA's G-III Research Aircraft

NASA Image and Video Library

2017-08-21

From aboard NASA's Armstrong Flight Research Center G-III aircraft, this wide angle video of the moon's umbra was captured as they flew over the coast of Oregon, near Lincoln City at 35,00 feet during the eclipse.

40 CFR 146.32 - Construction requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Construction requirements. 146.32... to Class III Wells § 146.32 Construction requirements. (a) All new Class III wells shall be cased and... would result. The casing and cement used in the construction of each newly drilled well shall be...

40 CFR 146.32 - Construction requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Construction requirements. 146.32... to Class III Wells § 146.32 Construction requirements. (a) All new Class III wells shall be cased and... would result. The casing and cement used in the construction of each newly drilled well shall be...

77 FR 48167 - Approved Tribal-State Class III Gaming Compact; Indian Gaming

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... DEPARTMENT OF THE INTERIOR Bureau of Indian Affairs Approved Tribal--State Class III Gaming Compact; Indian Gaming AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice of Approved Tribal... the Eastern Band of Cherokee Indians and the State of North Carolina. DATES: Effective Date: August 13...

46 CFR 170.173 - Criterion for vessels of unusual proportion and form.

Code of Federal Regulations, 2013 CFR

2013-10-01

... routes, there must be— (i) Positive righting arms to at least 35 degrees of heel; (ii) No down flooding... following angles: (A) Angle of maximum righting arm. (B) Angle of down flooding. (C) 40 degrees. (2) For... flooding point to at least 15 degrees; and (iii) At least 10 foot-degrees of energy to the smallest of the...

46 CFR 170.173 - Criterion for vessels of unusual proportion and form.

Code of Federal Regulations, 2014 CFR

2014-10-01

... routes, there must be— (i) Positive righting arms to at least 35 degrees of heel; (ii) No down flooding... following angles: (A) Angle of maximum righting arm. (B) Angle of down flooding. (C) 40 degrees. (2) For... flooding point to at least 15 degrees; and (iii) At least 10 foot-degrees of energy to the smallest of the...

46 CFR 170.173 - Criterion for vessels of unusual proportion and form.

Code of Federal Regulations, 2012 CFR

2012-10-01

... routes, there must be— (i) Positive righting arms to at least 35 degrees of heel; (ii) No down flooding... following angles: (A) Angle of maximum righting arm. (B) Angle of down flooding. (C) 40 degrees. (2) For... flooding point to at least 15 degrees; and (iii) At least 10 foot-degrees of energy to the smallest of the...

Biowaiver extension potential to BCS Class III high solubility-low permeability drugs: bridging evidence for metformin immediate-release tablet.

PubMed

Cheng, Ching-Ling; Yu, Lawrence X; Lee, Hwei-Ling; Yang, Chyun-Yu; Lue, Chang-Sha; Chou, Chen-Hsi

2004-07-01

The biopharmaceutics classification system (BCS) allows biowaiver for rapid dissolving immediate-release (IR) products of Class I drugs (high solubility and high permeability). The possibility of extending biowaivers to Class III high solubility and low permeability drugs is currently under scrutiny. In vivo bioequivalence data of different formulations of Class III drugs would support such an extension. The objective of this work was to demonstrate the bioequivalence of two marketed IR tablet products of a Class III drug, metformin hydrochloride, that are rapidly dissolving and have similar in vitro dissolution profiles. The effect of race on the systemic exposure of metformin was also explored. A randomized, open-label, two-period crossover study was conducted in 12 healthy Chinese male volunteers. Each subject received a single-dose of 500 mg of each product after an overnight fasting. The plasma concentrations of metformin were followed for 24 h. No significant formulation effect was found for the bioequivalence metrics: areas under concentration-time curve (AUC0-t, AUC0-infinity) and maximal concentration (Cmax). The 90% confidence intervals for the ratio of means were found within the acceptance range of 80-125% for the log-transformed data. Based on these results, it was concluded that the two IR products are bioequivalent. The pharmacokinetic parameters of metformin in Chinese for both products were similar and were in good agreement with those reported for metformin IR tablets in other ethnic populations. This study serves as an example for supporting biowaiver for BCS Class III drugs.

Comparative structural modeling of six old yellow enzymes (OYEs) from the necrotrophic fungus Ascochyta rabiei: insight into novel OYE classes with differences in cofactor binding, organization of active site residues and stereopreferences.

PubMed

Nizam, Shadab; Gazara, Rajesh Kumar; Verma, Sandhya; Singh, Kunal; Verma, Praveen Kumar

2014-01-01

Old Yellow Enzyme (OYE1) was the first flavin-dependent enzyme identified and characterized in detail by the entire range of physical techniques. Irrespective of this scrutiny, true physiological role of the enzyme remains a mystery. In a recent study, we systematically identified OYE proteins from various fungi and classified them into three classes viz. Class I, II and III. However, there is no information about the structural organization of Class III OYEs, eukaryotic Class II OYEs and Class I OYEs of filamentous fungi. Ascochyta rabiei, a filamentous phytopathogen which causes Ascochyta blight (AB) in chickpea possesses six OYEs (ArOYE1-6) belonging to the three OYE classes. Here we carried out comparative homology modeling of six ArOYEs representing all the three classes to get an in depth idea of structural and functional aspects of fungal OYEs. The predicted 3D structures of A. rabiei OYEs were refined and evaluated using various validation tools for their structural integrity. Analysis of FMN binding environment of Class III OYE revealed novel residues involved in interaction. The ligand para-hydroxybenzaldehyde (PHB) was docked into the active site of the enzymes and interacting residues were analyzed. We observed a unique active site organization of Class III OYE in comparison to Class I and II OYEs. Subsequently, analysis of stereopreference through structural features of ArOYEs was carried out, suggesting differences in R/S selectivity of these proteins. Therefore, our comparative modeling study provides insights into the FMN binding, active site organization and stereopreference of different classes of ArOYEs and indicates towards functional differences of these enzymes. This study provides the basis for future investigations towards the biochemical and functional characterization of these enigmatic enzymes.

Safety considerations in the pharmacological management of atrial fibrillation.

PubMed

Camm, A John

2008-07-21

The pharmacological management of atrial fibrillation (AF) requires careful consideration from a safety perspective. This article focuses primarily on maintenance therapy using antiarrhythmic drugs (AADs). The foremost safety issue for AADs is the propensity of class IA and III agents to cause torsade de pointes arrhythmias. Class IA drugs, particularly quinidine, can induce torsade de pointes at low or subtherapeutic doses, but higher doses are not necessarily associated with an increased incidence. 'Pure' class III drugs such as dofetilide induce torsade de pointes in a dose-related manner, but some class III agents with more complex actions such as amiodarone have a markedly lower potential to cause this arrhythmia. The risk of torsade de pointes precludes the use of class IA and 'pure' class III agents in patients with left ventricular hypertrophy and bradycardia. Class IC agents may cause sustained monomorphic ventricular tachycardias and are generally precluded in ischaemic and structural heart disease. Advanced heart failure patients may be treated with amiodarone or dofetilide, but most other AADs are unsuitable. The most important extracardiac toxicities occurring with AADs are those of amiodarone. Drug interactions are a significant safety issue in the management of AF, including pharmacokinetic interactions in which plasma levels of the AAD are raised - increasing the risk of proarrhythmia - and concomitant use of drugs that prolong the QT interval. Notwithstanding these considerations, most patients with AF can be considered for rhythm control, provided there is adequate pre-treatment assessment and protocols for initiation, dosing and monitoring are followed with care.

Usefulness of the brain natriuretic peptide to atrial natriuretic peptide ratio in determining the severity of mitral regurgitation.

PubMed

Shimamoto, Ken; Kusumoto, Miyako; Sakai, Rieko; Watanabe, Hirota; Ihara, Syunichi; Koike, Natsuka; Kawana, Masatoshi

2007-03-15

Atrial natriuretic peptide (ANP) and brain natriuretic peptide (BNP) levels were characterized in subjects with mitral regurgitation (MR). Sixty-two cases of moderate or severe chronic MR were studied. The blood levels of neurohormonal factors were stratified by the known MR prognostic factors of New York Heart Association (NYHA) functional class, left ventricular end-diastolic diameters, left ventricular end-systolic diameter (LVDs), ejection fraction (EF), left atrial diameter and presence of atrial fibrillation (AF). ANP levels were higher in NYHA class II and lower in classes I and III/IV (P=0.0206). BNP levels were higher in NYHA class II than class I (P=0.0355). The BNP/ANP ratio was significantly higher in NYHA classes II and III/IV than in class I (P=0.0007). To differentiate between NYHA classes I/II and III/IV, a cut-off BNP/ANP ratio of 2.97 produced a sensitivity of 78% and specificity of 87%. Compared with subjects in sinus rhythm, patients with AF had an enlarged left atrium and lower ANP levels. The BNP/ANP ratio correlated significantly with left atrial diameter, LVDs and EF (r=0.429, P=0.0017; r=0.351, P=0.0117; and r=-0.349, P=0.0122; respectively), and was significantly higher among all the known operative indications for MR tested (LVDs 45 mm or more, EF 60% or less, NYHA class II or greater and AF; P=0.0073, P=0.003, P=0.0102 and P=0.0149, respectively). In chronic MR, levels of ANP and BNP, and the BNP/ANP ratio are potential indicators of disease severity.

Correction of Angle Class II division 1 malocclusion with a mandibular protraction appliances and multiloop edgewise archwire technique

PubMed Central

Freitas, Heloiza; dos Santos, Pedro César F; Janson, Guilherme

2014-01-01

A Brazilian girl aged 14 years and 9 months presented with a chief complaint of protrusive teeth. She had a convex facial profile, extreme overjet, deep bite, lack of passive lip seal, acute nasolabial angle, and retrognathic mandible. Intraorally, she showed maxillary diastemas, slight mandibular incisor crowding, a small maxillary arch, 13-mm overjet, and 4-mm overbite. After the diagnosis of severe Angle Class II division 1 malocclusion, a mandibular protraction appliance was placed to correct the Class II relationships and multiloop edgewise archwires were used for finishing. Follow-up examinations revealed an improved facial profile, normal overjet and overbite, and good intercuspation. The patient was satisfied with her occlusion, smile, and facial appearance. The excellent results suggest that orthodontic camouflage by using a mandibular protraction appliance in combination with the multiloop edgewise archwire technique is an effective option for correcting Class II malocclusions in patients who refuse orthognathic surgery. PMID:25309867

49 CFR 572.155 - Test conditions and instrumentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation potentiometer response (if used)—CFC 60. (3) Thorax: (i) Spine and pendulum accelerations—Class 180; (ii) Shoulder forces—Class 600; (4...

49 CFR 572.155 - Test conditions and instrumentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation potentiometer response (if used)—CFC 60. (3) Thorax: (i) Spine and pendulum accelerations—Class 180; (ii) Shoulder forces—Class 600; (4...

49 CFR 572.155 - Test conditions and instrumentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation potentiometer response (if used)—CFC 60. (3) Thorax: (i) Spine and pendulum accelerations—Class 180; (ii) Shoulder forces—Class 600; (4...

49 CFR 572.155 - Test conditions and instrumentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation potentiometer response (if used)—CFC 60. (3) Thorax: (i) Spine and pendulum accelerations—Class 180; (ii) Shoulder forces—Class 600; (4...

49 CFR 572.155 - Test conditions and instrumentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Moments—Class 600; (iii) Pendulum acceleration—Class 180; (iv) Rotation potentiometer response (if used)—CFC 60. (3) Thorax: (i) Spine and pendulum accelerations—Class 180; (ii) Shoulder forces—Class 600; (4...

[Clinical policy for management and risk stratification of community-acquired pneumonia in patients hospitalized on the basis of conventional admission criteria].

PubMed

Putinati, Stefano; Ballerin, Licia; Piattella, Marco; Ritrovato, Lucia; Zabini, Franco; Potena, Alfredo

2003-05-01

To identify discrepancies between Pneumonia Severity Index (PSI) risk class and the conventional criteria for deciding the site of care we performed a prospective observational study on 229 patients hospitalized for community-acquired pneumonia. PSI classes and corresponding mortality rates were as following: class I, 41 patients (0%); class II, 20 (0%); class III, 58 (1.7%); class IV, 86 (8.1%); class V, 24 (33.3%). Overall, 119 patients (52%) who were hospitalized according to conventional criteria were assigned to low-risk classes (I-III). Among these low risk patients, 58 (49%) had complications as respiratory failure, pleural effusion, hypotension or shock; among remaining patients, no reasons for admission were found. This latter group deserves prospective evaluation in randomized studies comparing in-hospital versus outpatient management.

77 FR 31067 - Cleveland Commercial Railroad Company, LLC-Continuance in Control Exemption-Cleveland Harbor Belt...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... becoming a Class III rail carrier. CCR has established CHB as a limited liability company and has the... Commercial Railroad Company, LLC--Continuance in Control Exemption--Cleveland Harbor Belt Railroad Cleveland Commercial Railroad Company, LLC (CCR), a Class III rail carrier, has filed a verified notice of exemption...

25 CFR 291.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Purpose and scope. 291.1 Section 291.1 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.1... promulgate rules for the conduct of Class III Indian gaming when: (a) A State and an Indian tribe are unable...

40 CFR 147.251 - EPA-administered program-Class I, III, IV and V wells and Indian lands.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., IV and V wells and Indian lands. 147.251 Section 147.251 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS California § 147.251 EPA-administered program—Class I, III, IV and V wells and...

40 CFR 147.301 - EPA-administered program-Class I, III, IV, V wells and Indian lands.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., IV, V wells and Indian lands. 147.301 Section 147.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS Colorado § 147.301 EPA-administered program—Class I, III, IV, V wells and Indian...

40 CFR 147.753 - Existing Class I and III wells authorized by rule.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS Indiana § 147.753 Existing Class I and III wells authorized by rule. Maximum injection pressure. The owner or operator shall limit injection pressure to the lessor of: (a) A value which will not...

40 CFR 146.10 - Plugging and abandoning Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) WATER PROGRAMS (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM: CRITERIA AND STANDARDS General... of drinking water. The Director may allow Class III wells to use other plugging materials if the... sources of drinking water. (2) Placement of the cement plugs shall be accomplished by one of the following...

Excelsior Mining Arizona, Inc. Gunnison Copper Project Class III UIC Area Permit and Aquifer Exemption

EPA Pesticide Factsheets

UIC Area Permit R9UIC-AZ3-FY16-1 and supporting documents for Class III In-Situ Production of Copper: Gunnison Copper Project, Cochise County, AZ, issued to Excelsior Mining Arizona Inc., Concord Place, Suite 300, 2999 North 44th Street, Phoenix, AZ 85018.

40 CFR 147.251 - EPA-administered program-Class I, III, IV and V wells and Indian lands.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., IV and V wells and Indian lands. 147.251 Section 147.251 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS California § 147.251 EPA-administered program—Class I, III, IV and V wells and...

40 CFR 147.301 - EPA-administered program-Class I, III, IV, V wells and Indian lands.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., IV, V wells and Indian lands. 147.301 Section 147.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS Colorado § 147.301 EPA-administered program—Class I, III, IV, V wells and Indian...

Three-dimensional assessment of maxillary changes associated with bone anchored maxillary protraction

PubMed Central

Nguyen, Tung; Cevidanes, Lucia; Cornelis, Marie A.; Heymann, Gavin; de Paula, Leonardo K.; De Clerck, Hugo

2013-01-01

Introduction Bone-anchored maxillary protraction has been shown to be an effective treatment modality for the correction of Class III malocclusions. The purpose of this study was to evaluate 3-dimensional changes in the maxilla, the surrounding hard and soft tissues, and the circummaxillary sutures after bone-anchored maxillary protraction treatment. Methods Twenty-five consecutive skeletal Class III patients between the ages of 9 and 13 years (mean, 11.10 ± 1.1 years) were treated with Class III intermaxillary elastics and bilateral miniplates (2 in the infrazygomatic crests of the maxilla and 2 in the anterior mandible). Cone-beam computed tomographs were taken before initial loading and 1 year out. Three-dimensional models were generated from the tomographs, registered on the anterior cranial base, superimposed, and analyzed by using color maps. Results The maxilla showed a mean forward displacement of 3.7 mm, and the zygomas and the maxillary incisors came forward 3.7 and 4.3 mm, respectively. Conclusions This treatment approach produced significant orthopedic changes in the maxilla and the zygomas in growing Class III patients. PMID:22133943

[Distal movement of the mandibular dentition in the treatment of patients with Class III skeletal pattern].

PubMed

Mou, Lan; Xu, Gengchi; Han, Yaohui; Ge, Zhenlin

2015-06-01

To evaluate the outcome of patients with skeletal Class III malocclusion treated with extraction of mandibular third molars and distalization of molars using implant anchorage combined with MBT appliance. Fifteen patients (mean age 24.0 ± 5.8) with skeletal Class III malocclusion were selected. The mandibular third molars were extracted and the mandibular molars were moved distally using implant combined with MBT appliance. Cephalometric analysis was carried out before and after treatment. After active treatment, ANB, Wits distance, AB-NP and the distance between upper and lower lip position to SnPg' increased by 1.65° ± 1.04°, (4.39 ± 1.93) mm, 3.20° ± 1.61° and (1.13 ± 0.99) mm, respectively. The differences were statistically significant (P < 0.05). The skeletal Class III patients in the permanent dentition could be treated successfully with extraction of mandibular third molars and distalization of mandibular molars using implant anchorage combined with MBT appliance. The soft-tissue profile was improved.

Theoretical discovery of stable structures of group III-V monolayers: The materials for semiconductor devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Tatsuo, E-mail: dr.tatsuosuzuki@gmail.com

Group III-V compounds are very important as the materials of semiconductor devices. Stable structures of the monolayers of group III-V binary compounds have been discovered by using first-principles calculations. The primitive unit cell of the discovered structures is a rectangle, which includes four group-III atoms and four group-V atoms. A group-III atom and its three nearest-neighbor group-V atoms are placed on the same plane; however, these connections are not the sp{sup 2} hybridization. The bond angles around the group-V atoms are less than the bond angle of sp{sup 3} hybridization. The discovered structure of GaP is an indirect transition semiconductor,more » while the discovered structures of GaAs, InP, and InAs are direct transition semiconductors. Therefore, the discovered structures of these compounds have the potential of the materials for semiconductor devices, for example, water splitting photocatalysts. The discovered structures may become the most stable structures of monolayers which consist of other materials.« less

Identification and cloning of class II and III chitinases from alkaline floral nectar of Rhododendron irroratum, Ericaceae.

PubMed

Zha, Hong-Guang; Milne, Richard I; Zhou, Hong-Xia; Chen, Xiang-Yang; Sun, Hang

2016-10-01

Class II and III chitinases belonging to different glycoside hydrolase families were major nectarins in Rhododendron irroratum floral nectar which showed significant chitinolytic activity. Previous studies have demonstrated antimicrobial activity in plant floral nectar, but the molecular basis for the mechanism is still poorly understood. Two chitinases, class II (Rhchi2) and III (Rhchi3), were characterized from alkaline Rhododendron irroratum nectar by both SDS-PAGE and mass spectrometry. Rhchi2 (27 kDa) and Rhchi3 (29 kDa) are glycoside hydrolases (family 19 and 18) with theoretical pI of 8.19 and 7.04. The expression patterns of Rhchi2 and Rhchi3 were analyzed by semi-quantitative RT-PCR. Rhchi2 is expressed in flowers (corolla nectar pouches) and leaves while Rhchi3 is expressed in flowers. Chitinase in concentrated protein and fresh nectar samples was visualised by SDS-PAGE and chitinolytic activity in fresh nectar was determined spectrophotometrically via chitin-azure. Full length gene sequences were cloned with Tail-PCR and RACE. The amino acid sequence deduced from the coding region for these proteins showed high identity with known chitinases and predicted to be located in extracellular space. Fresh R. irroratum floral nectar showed significant chitinolytic activity. Our results demonstrate that class III chitinase (GH 18 family) also exists in floral nectar. The functional relationship between class II and III chitinases and the role of these pathogenesis-related proteins in antimicrobial activity in nectar is suggested.

Effects of landiolol, an ultra-short-acting beta1-selective blocker, on electrical storm refractory to class III antiarrhythmic drugs.

PubMed

Miwa, Yosuke; Ikeda, Takanori; Mera, Hisaaki; Miyakoshi, Mutsumi; Hoshida, Kyoko; Yanagisawa, Ryoji; Ishiguro, Haruhisa; Tsukada, Takehiro; Abe, Atsuko; Yusu, Satoru; Yoshino, Hideaki

2010-05-01

Occasionally it is difficult to inhibit electrical storm (ES) with standard pharmacological treatment. In the present study the effect of landiolol, an ultra-short-acting beta(1)-selective blocker, on ES refractory to class III antiarrhythmic drugs was evaluated. The study group comprised 42 consecutive patients who developed ES for which intravenous class III antiarrhythmic drugs, such as amiodarone and nifekalant, were ineffective. Landiolol was administered intravenously with an initial dose of 2.5 microg x kg(-1) x min(-1), which was doubled if it was ineffective, up to a maximum dose of 80 microg x kg(-1) x min(-1). Landiolol inhibited ES in 33 patients (79%) at a mean dose of 7.5+/-12.2 microg x kg(-1) x min(-1). All patients in whom landiolol was ineffective died of arrhythmia. Of the 33 patients in whom landiolol was effective, 25 survived and were discharged (60% of all patients). Landiolol significantly decreased heart rate (P<0.0001), but did not affect blood pressure. Landiolol was not discontinued for adverse effects in any of the responders. Age, APACHE II score, and pH of arterial blood gas differed significantly between the responders and nonresponders. Landiolol is useful as a life-saving drug for class III antiarrhythmic drug-resistant ES. The main mechanism of ES refractory to class III antiarrhythmic drugs could be abnormal automaticity but not reentry.

Long-Term Incisal Relationships after Palatoplasty in Patients with Isolated Cleft Palate

PubMed Central

Odom, Elizabeth B.; Woo, Albert S.; Mendonca, Derick A.; Huebener, Donald V.; Nissen, Richard J.; Skolnick, Gary B.; Patel, Kamlesh B.

2016-01-01

Purpose Various palatoplasty techniques have limited incisions in the hard palate due to concerns that these incisions may limit maxillary growth. There is little convincing long-term evidence to support this. Our purpose is to determine incisal relationships, an indicator for future orthognathic procedure, in patients after repair of an isolated cleft of the secondary palate. Methods Our craniofacial database was used to identify patients aged ten years or greater with an isolated cleft of the secondary palate who underwent palatoplasty between 1985 and 2002. Data collected included age at palatoplasty and follow-up, cleft type, associated syndrome, Robin sequence, surgeon, repair technique, number of operations, and occlusion. Incisal relationship was determined through clinical observation by a pediatric dentist and orthodontist. Results Seventy eligible patients operated on by 9 surgeons were identified. Class III incisal relationship was seen in 5 patients (7.1%). Palatoplasty techniques over the hard palate (63 of 70 patients) included two-flap palatoplasty, VY-pushback, and Von Langenbeck repair. There was an association between class III incisal relationship and syndromic diagnosis (p < 0.001). Other study variables were not associated with class III incisal relationships. Conclusion In patients with an isolated cleft of the secondary palate, there was no association between class III incisal relationship and surgeon, age at repair, cleft type, palatoplasty technique, or number of operations. Increased likelihood of class III incisal relationship was associated primarily with syndromic diagnosis. PMID:27171942

Incipient class II mixed valency in a plutonium solid-state compound

NASA Astrophysics Data System (ADS)

Cary, Samantha K.; Galley, Shane S.; Marsh, Matthew L.; Hobart, David L.; Baumbach, Ryan E.; Cross, Justin N.; Stritzinger, Jared T.; Polinski, Matthew J.; Maron, Laurent; Albrecht-Schmitt, Thomas E.

2017-09-01

Electron transfer in mixed-valent transition-metal complexes, clusters and materials is ubiquitous in both natural and synthetic systems. The degree to which intervalence charge transfer (IVCT) occurs, dependent on the degree of delocalization, places these within class II or III of the Robin-Day system. In contrast to the d-block, compounds of f-block elements typically exhibit class I behaviour (no IVCT) because of localization of the valence electrons and poor spatial overlap between metal and ligand orbitals. Here, we report experimental and computational evidence for delocalization of 5f electrons in the mixed-valent PuIII/PuIV solid-state compound, Pu3(DPA)5(H2O)2 (DPA = 2,6-pyridinedicarboxylate). The properties of this compound are benchmarked by the pure PuIII and PuIV dipicolinate complexes, [PuIII(DPA)(H2O)4]Br and PuIV(DPA)2(H2O)3·3H2O, as well as by a second mixed-valent compound, PuIII[PuIV(DPA)3H0.5]2, that falls into class I instead. Metal-to-ligand charge transfer is involved in both the formation of Pu3(DPA)5(H2O)2 and in the IVCT.

A binuclear Mn(III) complex of a scorpiand-like ligand displaying a single unsupported Mn(III)-O-Mn(III) bridge.

PubMed

Blasco, Salvador; Cano, Joan; Clares, M Paz; García-Granda, Santiago; Doménech, Antonio; Jiménez, Hermas R; Verdejo, Begoña; Lloret, Francesc; García-España, Enrique

2012-11-05

The crystal structure of a binuclear Mn(III) complex of a scorpiand-like ligand (L) displays an unsupported single oxo bridging ligand with a Mn(III)-O-Mn(III) angle of 174.7°. Magnetic susceptibility measurements indicate strong antiferromagnetic coupling between the two metal centers. DFT calculations have been carried out to understand the magnetic behavior and to analyze the nature of the observed Jahn-Teller distortion. Paramagnetic (1)H NMR has been applied to rationalize the formation and magnetic features of the complexes formed in solution.

Interstitial telomere-like repeats in the Arabidopsis thaliana genome.

PubMed

Uchida, Wakana; Matsunaga, Sachihiro; Sugiyama, Ryuji; Kawano, Shigeyuki

2002-02-01

Eukaryotic chromosomal ends are protected by telomeres, which are thought to play an important role in ensuring the complete replication of chromosomes. On the other hand, non-functional telomere-like repeats in the interchromosomal regions (interstitial telomeric repeats; ITRs) have been reported in several eukaryotes. In this study, we identified eight ITRs in the Arabidopsis thaliana genome, each consisting of complete and degenerate 300- to 1200-bp sequences. The ITRs were grouped into three classes (class IA-B, class II, and class IIIA-E) based on the degeneracy of the telomeric repeats in ITRs. The telomeric repeats of the two ITRs in class I were conserved for the most part, whereas the single ITR in class II, and the five ITRs in class III were relatively degenerated. In addition, degenerate ITRs were surrounded by common sequences that shared 70-100% homology to each other; these are named ITR-adjacent sequences (IAS). Although the genomic regions around ITRs in class I lacked IAS, those around ITRs in class II contained IAS (IASa), and those around five ITRs in class III had nine types of IAS (IASb, c, d, e, f, g, h, i, and j). Ten IAS types in classes II and III showed no significant homology to each other. The chromosomal locations of ITRs and IAS were not category-related, but most of them were adjacent to, or part of, a centromere. These results show that the A. thaliana genome has undergone chromosomal rearrangements, such as end-fusions and segmental duplications.

[Microinvasive dental treatment in pre-school children].

PubMed

Korolenkova, M V

The aim of the study was to assess the efficiency of atraumatic restorative treatment (ART) with cavity preparation by means of dental endo motor. ART method was applied in 94 children (50 females and 44 males, 301 teeth treated) aged 21-96 months. Wireless dental endo motor (Endo Mate TC2, NSK, Japan) was used for cavity preparation. The cavities (102 (33.9%) class I, 156 (51.8%) class V, 20 (6.6%) class II, 18 (6%) class III and 5 (1.7%) class IV) were then filled with glass-ionomer cement (Fuji IX, GC, Japan). Success rate was assessed 3, 6, 12 and 18 months after treatment. Overall ART procedure success rate (good marginal fit, no occlusal wearing or restoration fractures) at 18-month follow up was 88.7% (267 fillings out of 301) with the highest survival in class I (96.1%) and class V (96.2%) restoration and poorest in class II (50%), class III (44.4%) and class IV (20%) restorations. Cavity preparation with wireless dental endo motor was well tolerated even by infants (12 children were younger than 24 months), as it is noiseless and significantly faster than conventional manual preparation. ART method with the use of dental endo motor showed good success rate and proved to be highly efficient in small and apprehensive children. The method, however, should be avoided in class III and IV cavities as the success rate is poor mostly because of restoration fractures.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern.

PubMed

Farret, Marcel Marchiori

2016-06-01

This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

PubMed Central

Farret, Marcel Marchiori

2016-01-01

ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO. PMID:27409659

Image Processing Techniques for Assessment of Dental Trays

DTIC Science & Technology

2001-10-25

170 patients having Angle Class I molar relationships with minor malocclusions and teeth including second molars fully erupted without loss of tooth...Abstract-A tray selected for the dental patient must adapt to the curvature of the teeth and allow the impression material to be in appropriate...brands of perforated metal trays with 170 lower arch cast models collected from patients having Angle Class 1 type occlusion with minor malocclusions

Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult.

PubMed

Hakami, Zaki; Chen, Po Jung; Ahmida, Ahmad; Janakiraman, Nandakumar; Uribe, Flavio

2018-01-01

This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult

PubMed Central

Chen, Po Jung; Ahmida, Ahmad; Janakiraman, Nandakumar; Uribe, Flavio

2018-01-01

This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment. PMID:29721340

Maxillary Transverse Comparison of Skeletal Class I and Class III Patient Populations Using Cone Beam Computed Tomography

DTIC Science & Technology

2012-04-13

conventional CT, the newer CBCT system had a number of advantages . The most celebrated advantage of CBCT is the reduced radiation burden to the patient...anteroposterior growth or perhaps do they mirror the overall shape of the underlying maxillary basal bone? 9     In a 2005 study, Franchi and Bacetti...stated that “no information is available for the dentoskeletal transverse dimensions in Class III subjects” ( Franchi and Baccetti 2005). These

Curve of Spee and its relationship to vertical eruption of teeth among different malocclusion groups.

PubMed

Veli, Ilknur; Ozturk, Mehmet Ali; Uysal, Tancan

2015-03-01

Our objectives were to assess the depth of the curve of Spee (COS) in different malocclusion groups, to relate this to the eruption of anterior or posterior teeth quantitatively, and to determine whether the depth of the COS is affected by the vertical eruption of anterior or posterior teeth. Two hundred conventional lateral cephalograms and 3-dimensional models of untreated patients (70 boys, mean age: 16.4 ± 1.4 years; 130 young women, mean age: 18.1 ± 1.8 years) were included and assigned to 4 malocclusion groups as Class I, Class II Division 1, Class II Division 2, and Class III. The depth of the COS, overjet, and overbite were measured on 3-dimensional models. The perpendicular distance between the incisal tip of the mandibular central incisor (L1-MP), the deepest point of the COS (S-MP), and the distobuccal cusp tip of the mandibular second molar (L7-MP) to the mandibular plane were calculated and proportioned with each other. The Pearson correlation coefficient was calculated, and multiple linear regression analysis was carried out. Also, multivariate analysis of variance was performed at the P <0.05 level. The mesiobuccal cusp of the first molar was the deepest part of the COS in all groups, with a maximum depth of 2.44 ± 0.73 mm in the Class II Division 1 subjects and a minimum depth of 1.76 ± 0.94 in the Class III subjects. The depth of the COS changed as follows: Class II Division 1 > Class II Division 2 > Class I > Class III malocclusion groups. Statistically significant positive correlations were found between the depth of the COS and L1-MP/S-MP (r = 0.541) and L7-MP/S-MP (r = 0.269) in the Class I and Class III subjects, and between the depth of the COS and overjet (r = 0.483) and L7-MP/S-MP (r = 0.289) in the Class II Division 1 subjects. All variables except overjet had positive correlations with the depth of the COS in Class II Division 2 subjects. The multivariate analysis of variance showed statistically significant differences in overjet, overbite, L1-MP/S-MP, L7-MP/S-MP, and the depth of the COS (P <0.001) among the groups. Although the overjet differed, vertical eruption of the anterior teeth did not differ among the different malocclusion groups and had a significant contribution to the depth of the COS in subjects with Class I and Class III malocclusions. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Unilateral distalization of a maxillary molar with sliding mechanics: a case report.

PubMed

Keles, Ahmet

2002-06-01

A unilateral Class II relationship could arise due to early loss of an upper second deciduous molar on one side during the mixed dentition period. This would allow the mesial drift of the molars, which may block the eruption of the second premolar. A 15-year 8-month-old male patient presented with a Class II molar relationship on the right, and Class I canine and molar relationship on the left side. His E was extracted when he was 5 years old. The 54 were impacted and the 3 was ectopically positioned due to the space loss from the mesial migration of the 76. In addition 21 1 were in cross-bite. Skeletally he had Class III tendency with low MMPA. He presented with a straight profile and retruded upper lip. For maxillary molar distalization, a newly developed 'Keles Slider' was used. The appliance was composed of one premolar and two molar bands, and the anchorage unit was composed of a wide Nance button. 46 were connected to the Nance button and, therefore, included into the anchorage unit. The point of distal force application was close to the centre of resistance of the 6 and parallel to the occlusal plane. Ni-Ti coil springs were used and 200 g of distal force was applied. Seven months later the space required for eruption of the permanent premolars and canine was regained, and the anterior cross-bite corrected. The appliance was removed and final alignment of the teeth was achieved with fixed appliances. At the end of the second phase treatment Class I molar and canine relationship was achieved on the both sides, the anterior cross-bite was corrected, inter-incisal angle was improved, and ideal overbite and overjet relationship was achieved. The active treatment time was 27 months.

SiC challenging parts for GAIA

NASA Astrophysics Data System (ADS)

Bougoin, M.

2017-11-01

GAIA is one of the cornerstone ESA missions which aims at compiling a catalogue of about one billion stars of our galaxy. Reaching the highly demanding scientific requirements lead ASTRIUM engineers to design a mechanically and thermally ultra-stable instrument. This is the reason why, thanks to its physical properties, the SiC turned out to be indispensable. The GAIA payload includes the following hardware which is mainly made of SiC i) the 3 meters quasi octagonal torus structure, ii) two identical 1.5 meters TMA type telescopes, iii) the central sub-assembly which holds several folding mirrors and the "Radial Velocity Spectrometer", iv) the focal plane and v) the "Basic Angle Monitoring". Due to the required large size (1 - 3 meters class), accuracy and shape complexity, developing and manufacturing these SiC parts was a real challenge for BOOSTEC. It is reviewed in this paper.

Color-color diagrams in near infrared: (J-H)/(H-K). I

NASA Astrophysics Data System (ADS)

Gyulbudaghian, Armen L.; Baloian, N.; Sanchez, I. A.

2017-12-01

In the paper are presented the color-color diagrams (J-H)/(H-K) for all stars with visible values B<11, for which in the known catalogs the values of J, H, K, and also spectral classes and luminosity classes of these stars are given. The diagrams are constructed for luminosity classes Ia, Ib, II, III, IV, V. The similarity of diagrams for classes Ia and Ib (super giants) and II (giants), is obvious from these diagrams. The diagrams obtained by us can be used for discovering of new young stars and also for determining of color excesses of investigating stars. Maximal amounts of stars are registered in the classes V and III. There is a tendency of increasing of J-H and H-K along the sequence of spectral classes O - M, which is correct for all luminosity classes.

Cytoskeleton and paclitaxel sensitivity in breast cancer: the role of beta-tubulins.

PubMed

Tommasi, Stefania; Mangia, Anita; Lacalamita, Rosanna; Bellizzi, Antonia; Fedele, Vita; Chiriatti, Annalisa; Thomssen, Christopher; Kendzierski, Nancy; Latorre, Agnese; Lorusso, Vito; Schittulli, Francesco; Zito, Francesco; Kavallaris, Maria; Paradiso, Angelo

2007-05-15

The antineoplastic effect of paclitaxel is mainly related to its ability to bind the beta subunit of tubulin, thus preventing tubulin chain depolarization and inducing apoptosis. The relevance of the Class I beta-tubulin characteristics have also been confirmed in the clinical setting where mutations of paclitaxel-binding site of beta-tubulin Class I have been related to paclitaxel resistance in non small cell lung and ovarian cancers. In the present study, we verified the hypothesis of a relationship between molecular alterations of beta-tubulin Class I and paclitaxel sensitivity in a panel of breast cell lines with different drug IC(50). The Class I beta-tubulin gene cDNA has been sequenced detecting heterozygous missense mutations (exon 1 and 4) only in MCF-7 and SK-BR-3 lines. Furthermore, the expression (at both mRNA and protein level) of the different isotypes have been analyzed demonstrating an association between low cell sensitivity to paclitaxel and Class III beta-tubulin expression increasing. Antisense oligonucleotide (ODN) experiments confirmed that the inhibition of Class III beta-tubulin could at least partially increase paclitaxel-chemosensitivity. The hypothesis of a relationship between beta-tubulin tumor expression and paclitaxel clinical response has been finally verified in a series of 92 advanced breast cancer patients treated with a first line paclitaxel-based chemotherapy. Thirty-five percent (95% CI: 45-31) of patients with high Class III beta-tubulin expression showed a disease progression vs. only 7% of patients with low expression (35% vs. 7%, p < 0.002). Our study suggests that Class III beta-tubulin tumor expression could be considered a predictive biomarker of paclitaxel-clinical resistance for breast cancer patients. (c) 2007 Wiley-Liss, Inc.

40 CFR 147.2800 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false State-administered program-Class I, II, III, IV, and V wells. 147.2800 Section 147.2800 Protection of Environment ENVIRONMENTAL PROTECTION... Federal Register effective July 31, 1985. (1) CNMI Environmental Protection Act, 2 CMC sections 3101, et...

40 CFR 147.2800 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 23 2014-07-01 2014-07-01 false State-administered program-Class I, II, III, IV, and V wells. 147.2800 Section 147.2800 Protection of Environment ENVIRONMENTAL PROTECTION... Federal Register effective July 31, 1985. (1) CNMI Environmental Protection Act, 2 CMC sections 3101, et...

40 CFR 147.2800 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false State-administered program-Class I, II, III, IV, and V wells. 147.2800 Section 147.2800 Protection of Environment ENVIRONMENTAL PROTECTION... Federal Register effective July 31, 1985. (1) CNMI Environmental Protection Act, 2 CMC sections 3101, et...

40 CFR 147.2800 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 24 2012-07-01 2012-07-01 false State-administered program-Class I, II, III, IV, and V wells. 147.2800 Section 147.2800 Protection of Environment ENVIRONMENTAL PROTECTION... Federal Register effective July 31, 1985. (1) CNMI Environmental Protection Act, 2 CMC sections 3101, et...

40 CFR 147.2800 - State-administered program-Class I, II, III, IV, and V wells.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false State-administered program-Class I, II, III, IV, and V wells. 147.2800 Section 147.2800 Protection of Environment ENVIRONMENTAL PROTECTION... Federal Register effective July 31, 1985. (1) CNMI Environmental Protection Act, 2 CMC sections 3101, et...

40 CFR 147.2550 - State-administered program-Class I, III, IV and V wells.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Rules and Regulations, Wyoming Department of Environmental Quality, Chapter XXI: In Situ Mining... program for Class I, III, IV and V wells in the State of Wyoming, except those on Indian lands is the... section 1422 of the SDWA. Notice of this approval was published in the Federal Register on July 15, 1983...

40 CFR 147.2550 - State-administered program-Class I, III, IV and V wells.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Rules and Regulations, Wyoming Department of Environmental Quality, Chapter XXI: In Situ Mining... program for Class I, III, IV and V wells in the State of Wyoming, except those on Indian lands is the... section 1422 of the SDWA. Notice of this approval was published in the Federal Register on July 15, 1983...

76 FR 13272 - Columbia & Cowlitz Railway, LLC-Corporate Family Transaction Exemption-Patriot Woods Railroad, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

... auxiliary and temporary storage tracks, in Cowlitz County, Wash. CLC and Woods are Class III rail carriers... intended to result in more efficient and lower cost operations. \\1\\ See Tenn. S. R.R.--Continuance in... for transactions under Sec. Sec. 11324 and 11325 that involve only Class III rail carriers...

Orthodontics-surgical combination therapy for Class III skeletal malocclusion

PubMed Central

Ravi, M. S.; Shetty, Nillan K.; Prasad, Rajendra B.

2012-01-01

The correction of skeletal Class III malocclusion with severe mandibular prognathism in an adult individual requires surgical and Othodontic combination therapy. The inter disciplinary approach is the treatment of choice in most of the skeletal malocclusions. A case report of an adult individual with Class III malocclusion, having mandibular excess in sagittal and vertical plane and treated with orthodontics,, bilateral sagittal split osteotomy and Le – Forte I osteotomy for the correction of skeletal, dental and soft tissue discrepancies is herewith presented. The surgical–orthodontic combination therapy has resulted in near–normal skeletal, dental and soft tissue relationship, with marked improvement in the facial esthetics in turn, has helped the patient to improve the self-confidence level. PMID:22557903

Management of the Class III malocclusion treated with maxillary expansion, facemask therapy and corrective orthodontic. A 15-year follow-up

PubMed Central

de ALMEIDA, Renato Rodrigues; ALESSIO, Luiz Eduardo; de ALMEIDA-PEDRIN, Renata Rodrigues; de ALMEIDA, Marcio Rodrigues; PINZAN, Arnaldo; VIEIRA, Luiz Sérgio

2015-01-01

The facial growth of Class III malocclusion worsens with age, in this case, the early orthopedic treatment, providing facial balance, modifying the maxillofacial growth and development. A 7.6-year old boy presented with Class III malocclusion associated with anterior crossbite; the mandible was shifted to the right and the maxilla had a transversal deficiency. Rapid maxillary expansion followed by facemask therapy was performed, to correct the anteroposterior relationship and improve the facial profile. The patient was followed for a 15-year period, after completion of the treatment, and stability was observed. Growing patients should be monitored following their treatment, so as to prevent malocclusion relapse. PMID:25760273

Maternal breastfeeding, parafunctional oral habits and malocclusion in adolescents: a multivariate analysis.

PubMed

Thomaz, Erika Bárbara Abreu Fonseca; Cangussu, Maria Cristina Teixeira; Assis, Ana Marlúcia Oliveira

2012-04-01

Malocclusion may result in esthetic impairment and functional disorders such as bad chewing, speech and swallowing, with a negative impact on quality of life. There is uncertainty regarding the effects of breastfeeding on dentofacial malocclusions. The purpose of the study was to evaluate the relationship between maternal breastfeeding and dental malocclusions and facial characteristics in adolescents with permanent dentition. Probabilistic sampling of 2060 12- to 15-year-old students in a cross-sectional study was used. Malocclusion, as defined by Angle, and facial characteristics were the dependent variables. The duration of breastfeeding was the main independent variable. Other covariates were tested as effect modifiers or confounders. The associations were estimated using the odds ratio (OR) in multinomial logistic regression analysis (α=5%). There was an association between a short duration of breastfeeding (less than 6 months) and Angle class II (OR=3.14; 95% CI: 1.28-7.66) and class III (OR=2.78; 95% CI: 1.21-6.36) malocclusion only in students with a prolonged history of bruxism. A higher occurrence of severe convex profile (OR=3.4; 95% CI: 0.63-18.26) and a lower occurrence of cancave profile (OR=0.43; 95% CI: 0.21-0.88) were also observed only among adolescents who had been breastfed for a short period and exposed to a long periods of mouth breathing. These findings support the hypothesis that breastfeeding alone seems not to be directly associated with malocclusions, but it may have a synergetic effect with parafunctional oral habits on the development of occlusofacial problems. It is recommended that deleterious oral habits be avoided, especially by children who were breast-fed for less than 6 months. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Mode I and mixed I/III crack initiation and propagation behavior of V-4Cr-4Ti alloy at 25{degrees}C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, H.X.; Kurtz, R.J.; Jones, R.H.

1997-04-01

The mode I and mixed-mode I/III fracture behavior of the production-scale heat (No. 832665) of V-4Cr-4Ti has been investigated at 25{degrees}C using compact tension (CT) specimens for a mode I crack and modified CT specimens for a mixed-mode I/III crack. The mode III to mode I load ratio was 0.47. Test specimens were vacuum annealed at 1000{degrees}C for 1 h after final machining. Both mode I and mixed-mode I/III specimens were fatigue cracked prior to J-integral testing. It was noticed that the mixed-mode I/III crack angle decreased from an initial 25 degrees to approximately 23 degrees due to crack planemore » rotation during fatigue cracking. No crack plane rotation occurred in the mode I specimen. The crack initiation and propagation behavior was evaluated by generating J-R curves. Due to the high ductility of this alloy and the limited specimen thickness (6.35 mm), plane strain requirements were not met so valid critical J-integral values were not obtained. However, it was found that the crack initiation and propagation behavior was significantly different between the mode I and the mixed-mode I/III specimens. In the mode I specimen crack initiation did not occur, only extensive crack tip blunting due to plastic deformation. During J-integral testing the mixed-mode crack rotated to an increased crack angle (in contrast to fatigue precracking) by crack blunting. When the crack initiated, the crack angle was about 30 degrees. After crack initiation the crack plane remained at 30 degrees until the test was completed. Mixed-mode crack initiation was difficult, but propagation was easy. The fracture surface of the mixed-mode specimen was characterized by microvoid coalescence.« less

Improving Angles-Only Navigation Performance by Selecting Sufficiently Accurate Accelerometers

DTIC Science & Technology

2009-08-01

controller for thrusters and a PID controller for momentum Wheels. Translational control leverages a PD controller for station keeping, and Clohessy ... Wiltshire (CW) equations targeting for trans- fers. Navigation is detailed in Section III.A. III.A. Kalman Filter Development A Square-Root EKF is

The hierarchy of stability and predictability in orthognathic surgery with rigid fixation: an update and extension.

PubMed

Proffit, William R; Turvey, Timothy A; Phillips, Ceib

2007-04-30

A hierarchy of stability exists among the types of surgical movements that are possible with orthognathic surgery. This report updates the hierarchy, focusing on comparison of the stability of procedures when rigid fixation is used. Two procedures not previously placed in the hierarchy now are included: correction of asymmetry is stable with rigid fixation and repositioning of the chin also is very stable. During the first post-surgical year, surgical movements in patients treated for Class II/long face problems tend to be more stable than those treated for Class III problems. Clinically relevant changes (more than 2 mm) occur in a surprisingly large percentage of orthognathic surgery patients from one to five years post-treatment, after surgical healing is complete. During the first post-surgical year, patients treated for Class II/long face problems are more stable than those treated for Class III problems; from one to five years post-treatment, some patients in both groups experience skeletal change, but the Class III patients then are more stable than the Class II/long face patients. Fewer patients exhibit long-term changes in the dental occlusion than skeletal changes, because the dentition usually adapts to the skeletal change.

Pixel based SHG probes of extracellular matrix (ECM) alterations in ovarian cancer (Conference Presentation)

NASA Astrophysics Data System (ADS)

Campbell, Kirby R.; Chaudhary, Rajeev; Handel, Julia; Campagnola, Paul J.

2017-02-01

Remodeling of the extracellular matrix in human ovarian cancer, can be reflected in increased collagen concentration, changes in alignment and/or up-regulation of different collagen isoforms, including Col III. Using fibrillar gel models, we demonstrate that Col I and Col III can be quantitatively distinguished by 3 distinct SHG polarization specific metrics: i) determination of helical pitch angle via the single axis molecular model, ii) dipole alignment via anisotropy, and iii) chirality via SHG circular dichroism (SHG-CD). These sub-resolution differentiations are possible due to differences in the α helix angles of the two isoforms, which co-mingle in the same fibrils. We also investigated the mechanism of the SHG-CD response and show that unlike conventional CD, it is dominated by electric dipole interactions and is consistent with the two state SHG model. We further applied these 3 polarization resolved analyses to human normal, high risk, benign tumors, and malignant human ovarian tissues. We found that these tissues could all be differentiated by these metrics, where high grade tissues had analogous α-helical pitch angles to the in the Col I/Col III gel model. This confirms literature suggestions based on immunofluorescence and gene expression that Col III is up-regulated in high grade ovarian cancers. The different tissues also displayed differing anisotropies, indicating the fibril assemblies are distinct and likely do not result from remodeling of existing collagen but synthesis of new collagen. Importantly, these SHG polarization methods provide structural information not otherwise possible and can serve as label-free biomarkers for ovarian and other cancers.

Velopharyngeal changes after maxillary distraction in cleft patients using a rigid external distraction device: A retrospective study.

PubMed

Taha, Mahasen; Elsheikh, Yasser M

2016-11-01

 To evaluate early and late velopharyngeal changes in cleft lip and palate (CLP) patients after use of the Rigid External Distractor (RED) device and to correlate these changes to the amount of maxillary advancement.  Thirty Class III CLP patients were included in the study. Maxillary advancement was performed using the RED device in combination with titanium miniplates and screws for anchorage. Lateral cephalograms, nasometer, and nasopharyngoscope records were taken before distraction, immediately after distraction, and 1 year after distraction. A paired t-test was used to detect differences at P < .05.  SNA angle and A point and ANS to Y axis were significantly increased after maxillary distraction (P  =  .0001). Statistically significant increases in nasopharyngeal and oropharyngeal depths, velar angle, and need ratio were also found (P  =  .0001). Nasalance scores showed a significant increase (P  =  .008 for nasal text and .044 for oral text). A significant positive correlation was observed between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality (P  =  .012 and .026, respectively).  Nasopharyngeal function was deteriorated after maxillary advancement in CLP patients. There was a significant positive correlation between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality.

78 FR 3497 - KM Railways, LLC-Acquisition and Operation Exemption-DTE Chicago Fuels Terminal, LLC and DTE Coal...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... Southern Railway Company in Chicago, Cook County, Ill.\\3\\ \\1\\ KMR is indirectly owned by noncarrier Koch Industries, Inc. (Koch). In addition to KMR, Koch also controls directly or indirectly three other Class III... Augustine Railroad, LLC), and Koch has sought Board authority to control a fourth Class III rail carrier...

40 CFR 144.28 - Requirements for Class I, II, and III wells authorized by rule.

Code of Federal Regulations, 2010 CFR

2010-07-01

... proposed test or measurement to be made; (D) The amount, size, and location (by depth) of casing to be left..., internal pressure, and axial loading; (iv) Hole size; (v) Size and grade of all casing strings; and (vi... Class III wells the owner or operator shall provide to the Director a qualitative analysis and ranges in...

Long-term Stability of a Camouflage Retreatment of an Asymmetric Class III/Posterior Open Bite Using Sliding Jigs.

PubMed

Oliveira, Dauro Douglas; de Oliveira, Bruno Franco; Figueiredo, Daniel Santos Fonseca; Antunes, Alberto Nogueira da Gama; Seraidarian, Paulo Isaías

2017-10-01

This article reports the camouflage retreatment of an adult patient presenting an asymmetric Class III malocclusion and posterior open bite. Sliding jigs (SJs) associated with intermaxillary elastics were used. The long-term stability of the excellent results suggests that the use of SJs to correct asymmetric posterior occlusions may be effective.

Non-extraction treatment of a Class III skeletal case.

PubMed

Gonzalez, Bulmario

2009-01-01

Adult Class III Skeletal treatment options have generally included some form of surgery (Maxillary advancement in midface deficient cases and/or Mandibular set-back). This article discusses non-surgical treatment of an adult patient using the combined concepts of mandibular molar distalization enhanced with TADs and non-extraction camouflage dental correction through maxillary incisor protraction and mandibular incisor lingualization.

49 CFR 173.213 - Non-bulk packagings for solid hazardous materials in Packing Group III.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Non-bulk packagings for solid hazardous materials... Hazardous Materials Other Than Class 1 and Class 7 § 173.213 Non-bulk packagings for solid hazardous materials in Packing Group III. (a) When § 172.101 of this subchapter specifies that a solid hazardous...

49 CFR 173.213 - Non-bulk packagings for solid hazardous materials in Packing Group III.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Non-bulk packagings for solid hazardous materials... Hazardous Materials Other Than Class 1 and Class 7 § 173.213 Non-bulk packagings for solid hazardous materials in Packing Group III. (a) When § 172.101 of this subchapter specifies that a solid hazardous...

YOUNG STELLAR OBJECTS IN THE GOULD BELT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunham, Michael M.; Allen, Lori E.; Evans II, Neal J.

2015-09-15

We present the full catalog of Young Stellar Objects (YSOs) identified in the 18 molecular clouds surveyed by the Spitzer Space Telescope “cores to disks” (c2d) and “Gould Belt” (GB) Legacy surveys. Using standard techniques developed by the c2d project, we identify 3239 candidate YSOs in the 18 clouds, 2966 of which survive visual inspection and form our final catalog of YSOs in the GB. We compile extinction corrected spectral energy distributions for all 2966 YSOs and calculate and tabulate the infrared spectral index, bolometric luminosity, and bolometric temperature for each object. We find that 326 (11%), 210 (7%), 1248more » (42%), and 1182 (40%) are classified as Class 0 + I, Flat-spectrum, Class II, and Class III, respectively, and show that the Class III sample suffers from an overall contamination rate by background Asymptotic Giant Branch stars between 25% and 90%. Adopting standard assumptions, we derive durations of 0.40–0.78 Myr for Class 0 + I YSOs and 0.26–0.50 Myr for Flat-spectrum YSOs, where the ranges encompass uncertainties in the adopted assumptions. Including information from (sub)millimeter wavelengths, one-third of the Class 0 + I sample is classified as Class 0, leading to durations of 0.13–0.26 Myr (Class 0) and 0.27–0.52 Myr (Class I). We revisit infrared color–color diagrams used in the literature to classify YSOs and propose minor revisions to classification boundaries in these diagrams. Finally, we show that the bolometric temperature is a poor discriminator between Class II and Class III YSOs.« less

Modern trends in Class III orthognathic treatment: A time series analysis.

PubMed

Lee, Chang-Hoon; Park, Hyun-Hee; Seo, Byoung-Moo; Lee, Shin-Jae

2017-03-01

To examine the current trends in surgical-orthodontic treatment for patients with Class III malocclusion using time-series analysis. The records of 2994 consecutive patients who underwent orthognathic surgery from January 1, 2004, through December 31, 2015, at Seoul National University Dental Hospital, Seoul, Korea, were reviewed. Clinical data from each surgical and orthodontic treatment record included patient's sex, age at the time of surgery, malocclusion classification, type of orthognathic surgical procedure, place where the orthodontic treatment was performed, orthodontic treatment modality, and time elapsed for pre- and postoperative orthodontic treatment. Out of the orthognathic surgery patients, 86% had Class III malocclusion. Among them, two-jaw surgeries have become by far the most common orthognathic surgical treatment these days. The age at the time of surgery and the number of new patients had seasonal variations, which demonstrated opposing patterns. There was neither positive nor negative correlation between pre- and postoperative orthodontic treatment time. Elapsed orthodontic treatment time for both before and after Class III orthognathic surgeries has been decreasing over the years. Results of the time series analysis might provide clinicians with some insights into current surgical and orthodontic management.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porta, Miquel; Facultat de Medicina, Universitat Autonoma de Barcelona; CIBER en Epidemiologia y Salud Publica

Background: The relationships between social factors and body concentrations of environmental chemical agents are unknown in many human populations. Some chemical compounds may play an etiopathogenic role in pancreatic cancer. Objective: To analyze the relationships between occupational social class and serum concentrations of seven selected organochlorine compounds (OCs) in exocrine pancreatic cancer: dichlorodiphenyltrichloroethane (p,p'-DDT), dichlorodiphenyldichloroethene (p,p'-DDE), 3 polychlorinated biphenyls (PCBs), hexachlorobenzene, and {beta}-hexachlorocyclohexane. Methods: Incident cases of exocrine pancreatic cancer were prospectively identified, and interviewed face-to-face during hospital admission (n=135). Serum concentrations of OCs were analyzed by high-resolution gas chromatography with electron-capture detection. Social class was classified according to occupation.more » Results: Multivariate-adjusted concentrations of all seven compounds were higher in occupational social classes IV-V (the less affluent) than in classes I-II; they were higher as well in class III than in classes I-II for four compounds. Concentrations of six OCs were higher in manual workers than in non-manual workers (p<0.05 for PCBs). Social class explained statistically between 3.7% and 5.7% of the variability in concentrations of PCBs, and 2% or less variability in the other OCs. Conclusions: Concentrations of most OCs were higher in the less affluent occupational social classes. In pancreatic cancer the putative causal role of these persistent organic pollutants may not be independent of social class. There is a need to integrate evidence on the contribution of different social processes and environmental chemical exposures to the etiology of pancreatic and other cancers.« less

Large displacement spherical joint

DOEpatents

Bieg, Lothar F.; Benavides, Gilbert L.

2002-01-01

A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

Effect of Compressive Mode I on the Mixed Mode I/II Fatigue Crack Growth Rate of 42CrMo4

NASA Astrophysics Data System (ADS)

Heirani, Hasan; Farhangdoost, Khalil

2018-01-01

Subsurface cracks in mechanical contact loading components are subjected to mixed mode I/II, so it is necessary to evaluate the fatigue behavior of materials under mixed mode loading. For this purpose, fatigue crack propagation tests are performed with compact tension shear specimens for several stress intensity factor (SIF) ratios of mode I and mode II. The effect of compressive mode I loading on mixed mode I/II crack growth rate and fracture surface is investigated. Tests are carried out for the pure mode I, pure mode II, and two different mixed mode loading angles. On the basis of the experimental results, mixed mode crack growth rate parameters are proposed according to Tanaka and Richard with Paris' law. Results show neither Richard's nor Tanaka's equivalent SIFs are very useful because these SIFs depend strongly on the loading angle, but Richard's equivalent SIF formula is more suitable than Tanaka's formula. The compressive mode I causes the crack closure, and the friction force between the crack surfaces resists against the crack growth. In compressive loading with 45° angle, d a/d N increases as K eq decreases.

WHO Class of Obesity Influences Functional Recovery Post-TKA.

PubMed

Maniar, Rajesh N; Maniar, Parul R; Singhi, Tushar; Gangaraju, Bharat Kumar

2018-03-01

No study in the literature has compared early functional recovery following total knee arthroplasty (TKA) in the obese with the nonobese using World Health Organization (WHO) classes of obesity. Our aim was to compare functional scores and flexion post-TKA in each class of obesity as per WHO classification against a matched control group of nonobese patients. Records of 885 consecutive primary TKA patients (919 knees) operated by a single surgeon were reviewed. The first 35 knees in each class I, class II and class III obesity group during the study period were then matched with a similar number of knees in nonobese TKA patients during the same period. Functional scores recorded pre- and postoperatively at 3 months and 1 year were Western Ontario and McMaster Osteoarthritis Index (WOMAC), Short-Form Health Survey (SF-12) score, and Knee Society Score (KSS). There was no difference in any parameter between the class I obese and matched nonobese at any assessment point. In the class II obese, as compared to the nonobese, there was no difference in any parameter preoperatively and 3 months postoperatively. However, 1 year postoperatively, the SF-12 physical subscore was lower in the class II obese than the nonobese (44.7 vs. 48.6, p = 0.047) and the WOMAC score was significantly higher (15.8 vs. 9.7, p = 0.04). In the class III obese, the WOMAC score was significantly higher than the nonobese (58.1 vs. 44.3, p < 0.001 preoperatively; 15.7 vs. 8.1, p = 0.005 at 1 year) and KSS was significantly lower (83.5 vs. 96.5, p = 0.049 preoperatively; 172 vs. 185; p = 0.003 at 1 year). Knee flexion was significantly lower in the class III obese than the nonobese (95 vs. 113; p < 0.001 preoperatively; 120 vs. 127; p = 0.002 at 1 year). The class I obese can expect good early and late functional recovery as the nonobese. The class II obese can expect comparable early functional recovery as the nonobese but their late function may be lesser. The class III obese would have poorer functional scores and lesser knee flexion postoperatively compared to the nonobese. However, compared to their own preoperative status, there is definite improvement in function and knee flexion.

Control of Flagellar Gene Regulation in Legionella pneumophila and Its Relation to Growth Phase▿ †

PubMed Central

Albert-Weissenberger, Christiane; Sahr, Tobias; Sismeiro, Odile; Hacker, Jörg; Heuner, Klaus; Buchrieser, Carmen

2010-01-01

The bacterial pathogen Legionella pneumophila responds to environmental changes by differentiation. At least two forms are well described: replicative bacteria are avirulent; in contrast, transmissive bacteria express virulence traits and flagella. Phenotypic analysis, Western blotting, and electron microscopy of mutants of the regulatory genes encoding RpoN, FleQ, FleR, and FliA demonstrated that flagellin expression is strongly repressed and that the mutants are nonflagellated in the transmissive phase. Transcriptome analyses elucidated that RpoN, together with FleQ, enhances transcription of 14 out of 31 flagellar class II genes, which code for the basal body, hook, and regulatory proteins. Unexpectedly, FleQ independent of RpoN enhances the transcription of fliA encoding sigma 28. Expression analysis of a fliA mutant showed that FliA activates three out of the five remaining flagellar class III genes and the flagellar class IV genes. Surprisingly, FleR does not induce but inhibits expression of at least 14 flagellar class III genes on the transcriptional level. Thus, we propose that flagellar class II genes are controlled by FleQ and RpoN, whereas the transcription of the class III gene fliA is controlled in a FleQ-dependent but RpoN-independent manner. However, RpoN and FleR might influence flagellin synthesis on a posttranscriptional level. In contrast to the commonly accepted view that enhancer-binding proteins such as FleQ always interact with RpoN to fullfill their regulatory functions, our results strongly indicate that FleQ regulates gene expression that is RpoN dependent and RpoN independent. Finally, FliA induces expression of flagellar class III and IV genes leading to the complete synthesis of the flagellum. PMID:19915024

Intravenous Vancomycin Associated With the Development of Nephrotoxicity in Patients With Class III Obesity.

PubMed

Choi, Yookyung Christy; Saw, Stephen; Soliman, Daniel; Bingham, Angela L; Pontiggia, Laura; Hunter, Krystal; Chuang, Linda; Siemianowski, Laura A; Ereshefsky, Benjamin; Hollands, James M

2017-11-01

A consensus statement recommends initial intravenous (IV) vancomycin dosing of 15-20 mg/kg every 8- 24 hours, with an optional 25- to 30-mg/kg loading dose. Although some studies have shown an association between weight and the development of vancomycin-associated nephrotoxicity, results have been inconsistent. To evaluate the correlation between incidence of nephrotoxicity associated with weight-based IV vancomycin dosing strategies in nonobese and obese patients. This retrospective cohort study evaluated hospitalized adult patients admitted who received IV vancomycin. Patients were stratified into nonobese (body mass index [BMI] <25 kg/m 2 ), obesity class I and II (BMI 30-39.9kg/m 2 ), and obesity class III (BMI≥40 kg/m 2 ) groups; patients who were overweight but not obese were excluded. Incidence of nephrotoxicity and serum vancomycin trough concentrations were evaluated. Of a total of 62 documented cases of nephrotoxicity (15.1%), 13 (8.7%), 23 (14.3%), and 26 (26.3%) cases were observed in nonobese, obesity class I and II, and obesity class III groups, respectively ( P=0.002). Longer durations of therapy ( P<0.0001), higher initial maintenance doses in both total milligrams/day ( P=0.0137) and milligrams/kilogram ( P=0.0307), and any trough level >20 mg/L ( P<0.0001) were identified as predictors of development of nephrotoxicity. Concomitant administration of piperacillin/tazobactam, diuretics, and IV contrast were associated with development of nephrotoxicity ( P<0.005, all). Patients with class III obesity were 3-times as likely to develop nephrotoxicity when compared with nonobese patients (odds ratio [OR]=2.99; CI=1.12-7.94) and obesity class I and II patients (OR=3.14; CI=1.27-7.75). Obesity and other factors are associated with a higher risk of vancomycin-associated nephrotoxicity.

Multiple Gingival Recession Coverage Treated with Vestibular Incision Subperiosteal Tunnel Access Approach with or without Platelet-Rich Fibrin - A Case Series

PubMed Central

Garg, Surbhi; Arora, Sachit Anand; Chhina, Shivjot; Singh, Padam

2017-01-01

Background: Gingival recession involves both soft tissue and hard tissue loss. In this evolutionary era of dentistry, newer techniques have evolved for complete coverage of isolated recession defects. Since 2012, vestibular incision subperiosteal tunnel access (VISTA) technique was used with various regenerative membranes to treat multiple recession defects (MRDs). Platelet-rich fibrin (PRF) membrane, a pool of growth factors but have any added advantage to recession coverage techniques is controversial. Thus, in this case series, we compare the effect of VISTA with or without PRF-membrane for the treatment of Classes I and III MRDs. Subjects and Methods: Four patients between of age 30 and 40 years (two patients having bilateral Class I and another two having bilateral Class III MRDs) were selected from the Department of Periodontics, ITS Dental College, Greater Noida and designated as Case I–IV simultaneously. Recession defects at antagonist sites in each patient were corrected by VISTA approach with or without PRF-membrane. Recorded clinical parameters included recession depth, recession width, pocket probing depth, and clinical attachment level (CAL) at baseline and 6 months postoperatively. Results: Patients having Class I recession defects showed almost complete root coverage with VISTA technique alone and reflected no added advantage of PRF-membrane. However, patients with Class III recession defects treated with VISTA + PRF-membrane showed more reduction in recession depth and gain in CAL as compared to sites treated with VISTA only. Conclusion: VISTA alone is a convenient technique for treatment of Class I MRDs. Addition of PRF-membrane for Class III recession defects give better outcome in term of reduction of recession depth and gain in CAL 6 month postoperatively. PMID:29042736

Sacubitril/Valsartan in an Elderly Patient with Heart Failure: A Case Report.

PubMed

Cameli, Matteo; Pastore, Maria Concetta; Pagliaro, Antonio; Di Tommaso, Cristina; Reccia, Rosanna; Curci, Valeria; Mandoli, Giulia Elena; Mondillo, Sergio

2017-01-01

Sacubitril/valsartan has recently been approved for the treatment of heart failure with reduced ejection fraction. Given its recent introduction in the armamentarium for the treatment of heart failure (HF), "field-practice" evidence is required to deepen the clinical management of sacubitril/valsartan therapy. We report a relevant case of an elderly patient who achieved major clinical benefits after only 3 months of sacubitril/valsartan therapy. Importantly, in our assessment, we employed speckle tracking echocardiography (STE), a recent echocardiography technique that is non-Doppler and not angle dependent, which analyzes deformations of heart chambers from standard images and allows a fast, reliable, and reproducible assessment of heart function. After 3 months of therapy, NHYA class decreased from III to I-II and hypertension was controlled. Echocardiography examination also showed a marked improvement, with a reduction of left ventricular diameter, improved diastolic function (E = 0.39 m/s; A 0.69 m/s; E/A 0.55), normalized diastolic function index (E/E' TDI = 6.93), normalized atrial volume (63 mL), and improved atrial strain (15.44%). This case report documents the fast clinical and symptom improvement with sacubitril/valsartan in an elderly patient with HF; comprehensive echocardiographic assessment, including STE, also revealed a marked functional improvement with this compound. © 2017 S. Karger AG, Basel.

A new prognostic model for chemotherapy-induced febrile neutropenia.

PubMed

Ahn, Shin; Lee, Yoon-Seon; Lee, Jae-Lyun; Lim, Kyung Soo; Yoon, Sung-Cheol

2016-02-01

The objective of this study was to develop and validate a new prognostic model for febrile neutropenia (FN). This study comprised 1001 episodes of FN: 718 for the derivation set and 283 for the validation set. Multivariate logistic regression analysis was performed with unfavorable outcome as the primary endpoint and bacteremia as the secondary endpoint. In the derivation set, risk factors for adverse outcomes comprised age ≥ 60 years (2 points), procalcitonin ≥ 0.5 ng/mL (5 points), ECOG performance score ≥ 2 (2 points), oral mucositis grade ≥ 3 (3 points), systolic blood pressure <90 mmHg (3 points), and respiratory rate ≥ 24 breaths/min (3 points). The model stratified patients into three severity classes, with adverse event rates of 6.0 % in class I (score ≤ 2), 27.3 % in class II (score 3-8), and 67.9 % in class III (score ≥ 9). Bacteremia was present in 1.1, 11.5, and 29.8 % of patients in class I, II, and III, respectively. The outcomes of the validation set were similar in each risk class. When the derivation and validation sets were integrated, unfavorable outcomes occurred in 5.9 % of the low-risk group classified by the new prognostic model and in 12.2 % classified by the Multinational Association for Supportive Care in Cancer (MASCC) risk index. With the new prognostic model, we can classify patients with FN into three classes of increasing adverse outcomes and bacteremia. Early discharge would be possible for class I patients, short-term observation could safely manage class II patients, and inpatient admission is warranted for class III patients.

Organization and variation analysis of 5S rDNA in different ploidy-level hybrids of red crucian carp × topmouth culter.

PubMed

He, Weiguo; Qin, Qinbo; Liu, Shaojun; Li, Tangluo; Wang, Jing; Xiao, Jun; Xie, Lihua; Zhang, Chun; Liu, Yun

2012-01-01

Through distant crossing, diploid, triploid and tetraploid hybrids of red crucian carp (Carassius auratus red var., RCC♀, Cyprininae, 2n = 100) × topmouth culter (Erythroculter ilishaeformis Bleeker, TC♂, Cultrinae, 2n = 48) were successfully produced. Diploid hybrids possessed 74 chromosomes with one set from RCC and one set from TC; triploid hybrids harbored 124 chromosomes with two sets from RCC and one set from TC; tetraploid hybrids had 148 chromosomes with two sets from RCC and two sets from TC. The 5S rDNA of the three different ploidy-level hybrids and their parents were sequenced and analyzed. There were three monomeric 5S rDNA classes (designated class I: 203 bp; class II: 340 bp; and class III: 477 bp) in RCC and two monomeric 5S rDNA classes (designated class IV: 188 bp, and class V: 286 bp) in TC. In the hybrid offspring, diploid hybrids inherited three 5S rDNA classes from their female parent (RCC) and only class IV from their male parent (TC). Triploid hybrids inherited class II and class III from their female parent (RCC) and class IV from their male parent (TC). Tetraploid hybrids gained class II and class III from their female parent (RCC), and generated a new 5S rDNA sequence (designated class I-N). The specific paternal 5S rDNA sequence of class V was not found in the hybrid offspring. Sequence analysis of 5S rDNA revealed the influence of hybridization and polyploidization on the organization and variation of 5S rDNA in fish. This is the first report on the coexistence in vertebrates of viable diploid, triploid and tetraploid hybrids produced by crossing parents with different chromosome numbers, and these new hybrids are novel specimens for studying the genomic variation in the first generation of interspecific hybrids, which has significance for evolution and fish genetics.

Verbal Inflectional Morphology in L1 and L2 Spanish: A Frequency Effects Study Examining Storage versus Composition

PubMed Central

Bowden, Harriet Wood; Gelfand, Matthew P.; Sanz, Cristina; Ullman, Michael T.

2009-01-01

This study examines the storage vs. composition of Spanish inflected verbal forms in L1 and L2 speakers of Spanish. L2 participants were selected to have mid-to-advanced proficiency, high classroom experience, and low immersion experience, typical of medium-to-advanced foreign language learners. Participants were shown the infinitival forms of verbs from either Class I (the default class, which takes new verbs) or Classes II and III (non-default classes), and were asked to produce either first-person singular present-tense or imperfect forms, in separate tasks. In the present tense, the L1 speakers showed inflected-form frequency effects (i.e., higher frequency forms were produced faster, which is taken as a reflection of storage) for stem-changing (irregular) verb-forms from both Class I (e.g., pensar-pienso) and Classes II and III (e.g., perder-pierdo), as well as for non-stem-changing (regular) forms in Classes II/III (e.g., vender-vendo), in which the regular transformation does not appear to constitute a default. In contrast, Class I regulars (e.g., pescar-pesco), whose non-stem-changing transformation constitutes a default (e.g., it is applied to new verbs), showed no frequency effects. L2 speakers showed frequency effects for all four conditions (Classes I and II/III, regulars and irregulars). In the imperfect tense, the L1 speakers showed frequency effects for Class II/III (-ía-suffixed) but not Class I (-aba-suffixed) forms, even though both involve non-stem-change (regular) default transformations. The L2 speakers showed frequency effects for both types of forms. The pattern of results was not explained by a wide range of potentially confounding experimental and statistical factors, and does not appear to be compatible with single-mechanism models, which argue that all linguistic forms are learned and processed in associative memory. The findings are consistent with a dual-system view in which both verb class and regularity influence the storage vs. composition of inflected forms. Specifically, the data suggest that in L1, inflected verbal forms are stored (as evidenced by frequency effects) unless they are both from Class I and undergo non-stem-changing default transformations. In contrast the findings suggest that at least these L2 participants may store all inflected verb-forms. Taken together, the results support dual-system models of L1 and L2 processing in which, at least at mid-to-advanced L2 proficiency and lower levels of immersion experience, the processing of rule-governed forms may depend not on L1 combinatorial processes, but instead on memorized representations. PMID:20419083

The Populus Class III HD ZIP, popREVOLUTA, influences cambium initiation and patterning of woody stems

Treesearch

Marcel Robischon; Juan Du; Eriko Miura; Andrew Groover

2011-01-01

The secondary growth of a woody stem requires the formation of a vascular cambium at an appropriate position and proper patterning of the vascular tissues derived from the cambium. Class III homeodomain-leucine zipper (HD ZIP) transcription factors have been implicated in polarity determination and patterning in lateral organs and primary vascular tissues and in the...

78 FR 24425 - Assay Migration Studies for In Vitro Diagnostic Devices; Guidance for Industry and Food and Drug...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-25

... approach to gain FDA approval of Class III or certain licensed in vitro diagnostic devices in cases when a... approach to gain FDA approval of Class III or certain licensed in vitro diagnostic devices in cases when a... fulfilled in order for a sponsor to utilize the migration study approach in support of the change. The FDA...

77 FR 43146 - Twin Cities & Western Railroad Company, the Estate of Douglas M. Head, and the DMH Trust fbo...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... & Western Railroad Company, the Estate of Douglas M. Head, and the DMH Trust fbo Martha M. Head--Continuance... Class III rail carrier, and the Estate of Douglas M. Head (the Estate), a noncarrier, to continue in control of Sisseton Milbank Railroad Company (SMRC) upon SMRC's becoming a Class III rail carrier in a...

76 FR 50663 - Effective Date of Requirement for Premarket Approval for Three Class III Preamendments Devices

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-16

... completion of a PDP is not filed by the latter of the two dates, and no IDE is in effect, the device is... availability of a preamendments class III devices strategy document. The strategy document set forth FDA's... approved PMA or a declared completed PDP is required to be in effect for any such devices on or before 180...

49 CFR 173.154 - Exceptions for Class 8 (corrosive materials).

Code of Federal Regulations, 2010 CFR

2010-10-01

... material meets the definition of a hazardous substance, hazardous waste, marine pollutant, or are offered... waste, or a marine pollutant, a material classed as a Class 8, Packing Group III, material solely...

37 CFR 2.6 - Trademark fees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... filing an application on paper, per class $375.00 (ii) For filing an application through TEAS, per class $325.00 (iii) For filing a TEAS Plus application under § 2.22, per class $275.00 (iv) Additional...

Obesity Cardiometabolic Comorbidity Prevalence in Children in a Rural Weight-Management Program.

PubMed

O'Hara, Valerie; Browne, Nancy; Fathima, Samreen; Sorondo, Barbara; Bayleran, Janet; Johnston, Starr; Hastey, Kathrin

2017-01-01

This descriptive study examines the prevalence of obesity-related cardiometabolic (CM) risk factors using CM laboratory metrics, in 3 to 19 year olds presenting to a rural American Academy of Pediatrics stage 3 multidisciplinary weight management clinic based on gender, age ranges, and obesity classes. From 2009 to 2016, 382 children (body mass index ≥85th percentile) enrolled. Multiple logistic regression determined the effects of age, gender, or obesity class on CM risk factors. Odds of elevated insulin were more significant in 15 to 19 year olds than in 3 to 5 year olds, or in 6 to 11 year olds. Obesity class III had higher odds than class II, class I, and overweight in having elevated insulin; twice likely than class II for having low high-density lipoprotein; and twice as likely than class I for high triglycerides. Adolescents and obesity class III categories have significant CM risk but the burden in younger and less severe obesity cohorts cannot be underestimated.

Solar-phase-angle effects on the taxonomic classification of asteroids

NASA Astrophysics Data System (ADS)

Carvano, J.; Davallos, J.

2014-07-01

Asteroid taxonomy is the effort of grouping asteroids into classes based on similarities of a number of their observational properties. The most used properties include measurements of their spectral reflectance (by means of low-resolution spectra, spectro-photometry, or colors), and geometric albedo. The usefulness of asteroid taxonomic classes derived in this way relies on the assumption that the classes bear some correspondence to the mineralogy of the asteroids, and on the fact that such classification can be made using types of observations that presently are available to a large number of asteroids. Therefore, asteroid taxonomy can be used to infer trends in the distribution of compositions in the main belt and other populations, as an additional parameter in defining asteroid families, and as a selection tool to identify candidates for more detailed observations. However, the fact that the correspondence between taxonomic class and composition is far from perfect is still sometimes overlooked in the literature. Indeed, although a taxonomic classification narrows down the possible mineralogies of a given asteroid, it will seldom point univocally to one particular mineralogy. This happens for a number of reasons, some linked to the intrinsic difficulty involved in the remote characterization of the mineralogy of an asteroid, since it depends on the presence of absorption bands in its reflectance spectrum which may be absent or not completely sampled by the observations used to derive taxonomy. Other problem here is the exposure of the material on the surface of the asteroid to space-weathering effects, such as solar wind implantation and micro-meteorite bombardment, which can change the optical properties of the material. Finally, the overall shape of the reflectance spectrum of an asteroid is also affected by the geometry of the observation, as well as by its shape. In this work, we analyze how the classification of asteroids observed by the Sloan Digital Sky Survey is affected by the solar phase angle of the observation. It is found that the number of observations assigned to several taxonomic classes has a clear dependency on the solar phase angle of the asteroid at the moment of the observation. In order to understand how variations of phase angles affect the reflectance spectra of the individual asteroids listed in the SDSS with multiple observations, we use the reflectance spectra derived from the SDSS colors to define two parameters, which measure the spectral slope in the visible and the depth of the 1-micron band, if present. It is found that most asteroids in the sample tend to be redder at higher phase angles, and that, for the classes showing a 1-μ m band, most show increasing band depth with increasing phase angle. This predominance of positive correlations for both band depth and spectral slope might suffice to explain the offsets in the distribution of classes. However, for both parameters there is a significant fraction in each sample for which there seem to be no correlation at all, and a comparable number seem to display anti-correlation between the parameters and the phase angle. Therefore, although phase-reddening effects, as currently understood in the literature, can account for the offsets in the distribution of taxonomic classes with phase angle, it cannot explain all variability seen in the SDSS data. There is also a dependency on composition and also shape effects involved, which can be reproduced using Hapke reflectance models.

Rheological and molecular weight comparisons of approved hyaluronic acid products - preliminary standards for establishing class III medical device equivalence.

PubMed

Braithwaite, Gavin J C; Daley, Michael J; Toledo-Velasquez, David

2016-01-01

Hyaluronic acid of various molecular weights has been in use for the treatment of osteoarthritis knee pain for decades. Worldwide, these products are regulated as either as drugs or devices and in some countries as both. In the US, this class of products is regulated as Class III medical devices, which places specific regulatory requirements on developers of these materials under a Pre-Market Approval process, typically requiring data from prospective randomized controlled clinical studies. In 1984 pharmaceutical manufacturers became able to file an Abbreviated New Drug Application for approval of a generic drug, thus establishing standards for demonstrating equivalence to an existing chemical entity. Recently, the first biosimilar, or 'generic biologic', was approved. Biosimilars are biological products that are approved by the FDA because they are 'highly similar' to a reference product, and have been shown to have no clinically meaningful differences from the reference product. For devices, Class II medical devices have a pathway for declaring equivalence to an existing product by filing a 510 k application for FDA clearance. However, until recently no equivalent regulatory pathway was available to Class III devices. In this paper, we consider the critical mechanical performance parameters for intra-articular hyaluronic products to demonstrate indistinguishable characteristics. Analogous to the aforementioned pathways that allow for a demonstration of equivalence, we examine these parameters for an existing, marketed device and compare molecular weight and rheological properties of multiple batches of a similar product. We propose that this establishes a scientific rationale for establishing Class III medical device equivalence.

Comparison of incisor inclination in patients with Class III malocclusion treated with orthognathic surgery or orthodontic camouflage.

PubMed

Troy, Beth A; Shanker, Shiva; Fields, Henry W; Vig, Katherine; Johnston, William

2009-02-01

Reports comparing Class III patients treated by camouflage and those treated by orthognathic surgery are not numerous. The purpose of this study was to compare the dental and skeletal values of Class III patients treated with these methods against normative data and over the course of treatment. Thirty-three surgical and 39 camouflage Class III patients were selected from a graduate orthodontic clinic and regional private practices, and lateral cephalograms were digitized. Skeletal and dental values were obtained, and mean and efficacy evaluations referenced to ethnic norms were calculated. At pretreatment, the surgery patients had more severe skeletal discrepancies and more compensated incisors. During presurgical orthodontic treatment, most of the surgery group's mandibular incisors were significantly decompensated, although half of the maxillary incisors remained compensated. The surgical move improved 90% of these patients but to only 60% to 65% of the norm. The camouflage group was compensated at pretreatment, and they became more compensated in the end. After treatment, there were no differences between the incisor positions of the 2 groups. There was no statistical difference in incisor inclination and position between the Class III surgical and camouflage groups after treatment; there was a significant difference in the pretreatment and posttreatment incisor inclination and position compared with normative values for both the surgical and the camouflage groups; the maxillary and mandibular incisors were not adequately decompensated in the surgical group, but significant improvement in mandibular incisor position and axial inclination was achieved presurgically. The outcome of the surgical correction was limited by the inadequate presurgical orthodontic incisor decompensation, and orthodontic compensation of incisors occurred postsurgically to achieve an optimal occlusal result.

Is alternate rapid maxillary expansion and constriction an effective protocol in the treatment of Class III malocclusion? A systematic review

PubMed Central

Pithon, Matheus Melo; Santos, Nathalia de Lima; dos Santos, Camila Rangel Barreto; Baião, Felipe Carvalho Souza; Pinheiro, Murilo Costa Rangel; Matos, Manoel; Souza, Ianderlei Andrade; de Paula, Rafael Pereira

2016-01-01

ABSTRACT Introduction: the treatment of Class III malocclusion in early age is one of the greatest challenges for orthodontists, and the establishment of more effective treatment method is a constant concern for these professionals. Thus, the objective of this systematic review is to verify the effectiveness of the therapy protocol for alternate rapid maxillary expansion and constriction (Alt-RAMEC) in the early treatment of Class III malocclusion. Methods: searches were performed in the following electronic databases: Cochrane Library, Medline (EBSCO and PubMed), SciELO, LILACS and Scopus. The following inclusion criteria were used: in vivo studies conducted with early intervention (patient in craniofacial development phase) with the use of the Alt-RAMEC protocol. Reviews, case reports, editorials, and studies with syndromic patients or under use of systemic drug were excluded. Duplicates were also excluded. The studies were assessed for methodological quality using the Cochrane tool for assessment of risk of bias, and classified as high or low risk of bias. Results: 53 articles were found. Duplicates exclusion was thus performed and 35 articles remained. After inclusion analysis, only 5 matched the criteria. Two articles were classified as low risk of bias and three as high risk of bias. It was observed that the Alt-RAMEC enable protraction in less time and with better results, promoting greater effectiveness in the protraction treatment of Class III malocclusion. Conclusions: Although there is positive evidence of the effectiveness of early treatment with the Alt-RAMEC protocol in patients with Class III malocclusion, further studies are needed to confirm its effectiveness using long-term methodology. PMID:28125138

Using Networks To Understand Medical Data: The Case of Class III Malocclusions

PubMed Central

Scala, Antonio; Auconi, Pietro; Scazzocchio, Marco; Caldarelli, Guido; McNamara, James A.; Franchi, Lorenzo

2012-01-01

A system of elements that interact or regulate each other can be represented by a mathematical object called a network. While network analysis has been successfully applied to high-throughput biological systems, less has been done regarding their application in more applied fields of medicine; here we show an application based on standard medical diagnostic data. We apply network analysis to Class III malocclusion, one of the most difficult to understand and treat orofacial anomaly. We hypothesize that different interactions of the skeletal components can contribute to pathological disequilibrium; in order to test this hypothesis, we apply network analysis to 532 Class III young female patients. The topology of the Class III malocclusion obtained by network analysis shows a strong co-occurrence of abnormal skeletal features. The pattern of these occurrences influences the vertical and horizontal balance of disharmony in skeletal form and position. Patients with more unbalanced orthodontic phenotypes show preponderance of the pathological skeletal nodes and minor relevance of adaptive dentoalveolar equilibrating nodes. Furthermore, by applying Power Graphs analysis we identify some functional modules among orthodontic nodes. These modules correspond to groups of tightly inter-related features and presumably constitute the key regulators of plasticity and the sites of unbalance of the growing dentofacial Class III system. The data of the present study show that, in their most basic abstraction level, the orofacial characteristics can be represented as graphs using nodes to represent orthodontic characteristics, and edges to represent their various types of interactions. The applications of this mathematical model could improve the interpretation of the quantitative, patient-specific information, and help to better targeting therapy. Last but not least, the methodology we have applied in analyzing orthodontic features can be applied easily to other fields of the medical science. PMID:23028552

Multi-angle backscatter classification and sub-bottom profiling for improved seafloor characterization

NASA Astrophysics Data System (ADS)

Alevizos, Evangelos; Snellen, Mirjam; Simons, Dick; Siemes, Kerstin; Greinert, Jens

2018-06-01

This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r2 > 0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings.

On the relevance of "ideal" occlusion concepts for incisor inclination target definition.

PubMed

Knösel, Michael; Jung, Klaus

2011-11-01

The concept of "ideal" occlusion in harmony with craniofacial structures is often proposed as an ultimate goal of orthodontic treatment. The aim of this study was to assess the impact of slight variations in posterior occlusion and the history of straight-wire orthodontic treatment on the predictability of incisor inclination and third-order angles. Axial incisor inclinations, third-order angles, and craniofacial relationships were assessed on lateral headfilms and corresponding dental casts of 75 healthy white subjects, 16 to 26 years old, selected by the general inclusion criterion of a good interincisal relationship. Four groups were formed: group A (n = 17), Angle Class I occlusion subjects with no orthodontic treatment; group B (n = 20), Angle Class I occlusion subjects treated with standardized straight-wire orthodontics; group C (n = 20), up to a half-cusp distal occlusion after straight-wire treatment; and group D (n = 18), up to a half-cusp distal occlusion and no orthodontic treatment. Regression analysis was used to insert predictor angles into selected regression equations of the subjects with "ideal" occlusion, and the absolute differences between predicted and observed response angles were determined. Small differences in incisor inclination were found between subjects with "ideal" occlusion and those who slightly deviated from "ideal" with a mild occlusion of the Angle Class II category. Posterior occlusion was not relevant to the validity of the vast majority of predictor-response pairs. Straight-wire treatment produced incisor inclination that was slightly protruded compared with subjects who had good natural occlusion. The "ideal" posterior occlusion concepts as a general orthodontic treatment goal should be reconsidered. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

The Cytophaga hutchinsonii ChTPSP: First characterized bifunctional TPS-TPP protein as putative ancestor of all eukaryotic trehalose biosynthesis proteins.

PubMed

Avonce, Nelson; Wuyts, Jan; Verschooten, Katrien; Vandesteene, Lies; Van Dijck, Patrick

2010-02-01

The most widely distributed pathway to synthesize trehalose in nature consists of two consecutive enzymatic reactions with a trehalose-6-P (T6P)-synthase (TPS) enzyme, producing the intermediate T6P, and a T6P-phosphatase (TPP) enzyme, which dephosphorylates T6P to produce trehalose and inorganic phosphate. In plants, these enzymes are called Class I and Class II proteins, respectively, with some Class I proteins being active enzymes. The Class II proteins possess both TPS and TPP consensus regions but appear to have lost enzymatic activity during evolution. Plants also contain an extra group of enzymes of small protein size, of which some members have been characterized as functional TPPs. These Class III proteins have less sequence similarity with the Class I and Class II proteins. Here, we characterize for the first time, by using biochemical analysis and yeast growth complementation assays, the existence of a natural TPS-TPP bifunctional enzyme found in the bacterial species Cytophaga hutchinsonii. Through phylogenetic analysis, we show that prokaryotic genes such as ChTPSP might be the ancestor of the eukaryotic trehalose biosynthesis genes. Second, we show that plants have recruited during evolution, possibly by horizontal transfer from bacteria such as Rhodoferax ferrireducens, a new type of small protein, encoding TPP activity, which have been named Class III proteins. RfTPP has very high TPP activity upon expression in yeast. Finally, we demonstrate that TPS gene duplication, the recruitment of the Class III enzymes, and recruitment of an N-terminal regulatory element, which regulates the Class I enzyme activity in higher plants, were initiated very early in eukaryan evolution as the three classes of trehalose biosynthesis genes are already present in the alga Ostreococcus tauri.

Association of obesity with healthcare utilization and costs in a Medicare population.

PubMed

Suehs, Brandon T; Kamble, Pravin; Huang, Joanna; Hammer, Mette; Bouchard, Jonathan; Costantino, Mary E; Renda, Andrew

2017-12-01

To examine the association of obesity with healthcare resource utilization and costs in a Medicare population. This study was a retrospective cohort study using Humana Medicare Advantage (MA) claims data. Body mass index (BMI) was assessed using ICD-9-CM status codes (V85 hierarchy) that have been validated in the data source to classify patients into BMI categories: normal (N), overweight (Ow), obese class I (ObI), obese class II (ObII), and obese class III (ObIII). Healthcare resource utilization (HRU) and costs were determined based on claims data. Descriptive statistics were used to examine baseline characteristics and HRU across BMI classes. Multivariable analysis was used to examine the association between BMI class and outcome measures. Among the 172,866 patients aged ≥65 years that were identified, BMI distribution was: N, 21%; Ow 37%; ObI, 24%, ObII, 10%; and ObIII, 9%. Inpatient, emergency department and outpatient utilization increased with greater BMI level, and greater BMI level was associated with higher total healthcare, medical and pharmacy costs. Greater prevalence of several cardiometabolic conditions, total medication use, and use of specific medication classes was observed with increasing BMI class. Greater BMI was associated with greater HRU and costs and observed increase in prevalence of cardiometabolic conditions. These results reflect an urgent need to address the epidemic of obesity and the resulting excessive clinical and economic burden on the healthcare system.

Interobserver agreement on histopathological lesions in class III or IV lupus nephritis.

PubMed

Wilhelmus, Suzanne; Cook, H Terence; Noël, Laure-Hélène; Ferrario, Franco; Wolterbeek, Ron; Bruijn, Jan A; Bajema, Ingeborg M

2015-01-07

To treat lupus nephritis effectively, proper identification of the histologic class is essential. Although the classification system for lupus nephritis is nearly 40 years old, remarkably few studies have investigated interobserver agreement. Interobserver agreement among nephropathologists was studied, particularly with respect to the recognition of class III/IV lupus nephritis lesions, and possible causes of disagreement were determined. A link to a survey containing pictures of 30 glomeruli was provided to all 360 members of the Renal Pathology Society; 34 responses were received from 12 countries (a response rate of 9.4%). The nephropathologist was asked whether glomerular lesions were present that would categorize the biopsy as class III/IV. If so, additional parameters were scored. To determine the interobserver agreement among the participants, κ or intraclass correlation values were calculated. The intraclass correlation or κ-value was also calculated for two separate levels of experience (specifically, nephropathologists who were new to the field or moderately experienced [less experienced] and nephropathologists who were highly experienced). Intraclass correlation for the presence of a class III/IV lesion was 0.39 (poor). The κ/intraclass correlation values for the additional parameters were as follows: active, chronic, or both: 0.36; segmental versus global: 0.39; endocapillary proliferation: 0.46; influx of inflammatory cells: 0.32; swelling of endothelial cells: 0.46; extracapillary proliferation: 0.57; type of crescent: 0.46; and wire loops: 0.35. The highly experienced nephropathologists had significantly less interobserver variability compared with the less experienced nephropathologists (P=0.004). There is generally poor agreement in terms of recognizing class III/IV lesions. Because experience clearly increases interobserver agreement, this agreement may be improved by training nephropathologists. These results also underscore the importance of a central review by experienced nephropathologists in clinical trials. Copyright © 2015 by the American Society of Nephrology.

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2014 CFR

2014-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2012 CFR

2012-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2013 CFR

2013-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

21 CFR 7.41 - Health hazard evaluation and recall classification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... exposed to the product being considered, with particular attention paid to the hazard to those individuals....e., Class I, Class II, or Class III, to indicate the relative degree of health hazard of the product...

SAGE III/ISS L2 Solar Event Species Profiles (Native) V5 (g3bsspb)

Atmospheric Science Data Center

2017-12-21

SAGE III/ISS L2 Solar Event Species Profiles (Native) V5 (g3bsspb)   Project ... present Temporal Resolution:  1 file per event File Format:  BINARY Tools:  Earthdata ... Radiation Longwave Radiation Shortwave Radiation Event Tag Event Type Obs Beta Angle Order Data:  ...

SAGE III/ISS L2 Lunar Event Species Profiles (Native) V5 (g3blspb)

Atmospheric Science Data Center

2018-01-08

SAGE III/ISS L2 Lunar Event Species Profiles (Native) V5 (g3blspb)   Project ... present Temporal Resolution:  1 file per event File Format:  BINARY Tools:  Earthdata ... Radiation Longwave Radiation Shortwave Radiation Event Tag Event Type Obs Beta Angle Order Data:  ...

The hierarchy of stability and predictability in orthognathic surgery with rigid fixation: an update and extension

PubMed Central

Proffit, William R; Turvey, Timothy A; Phillips, Ceib

2007-01-01

A hierarchy of stability exists among the types of surgical movements that are possible with orthognathic surgery. This report updates the hierarchy, focusing on comparison of the stability of procedures when rigid fixation is used. Two procedures not previously placed in the hierarchy now are included: correction of asymmetry is stable with rigid fixation and repositioning of the chin also is very stable. During the first post-surgical year, surgical movements in patients treated for Class II/long face problems tend to be more stable than those treated for Class III problems. Clinically relevant changes (more than 2 mm) occur in a surprisingly large percentage of orthognathic surgery patients from one to five years post-treatment, after surgical healing is complete. During the first post-surgical year, patients treated for Class II/long face problems are more stable than those treated for Class III problems; from one to five years post-treatment, some patients in both groups experience skeletal change, but the Class III patients then are more stable than the Class II/long face patients. Fewer patients exhibit long-term changes in the dental occlusion than skeletal changes, because the dentition usually adapts to the skeletal change. PMID:17470277

Camouflage of moderate Class III malocclusions with extraction of lower second molars and mandibular cervical headgear.

PubMed

Mora, Diego Rey; Oberti, Giovanni; Ealo, Martha; Baccetti, Tiziano

2007-01-01

Orthodontic camouflage in patients with slight or moderate skeletal Class III malocclusions, can be obtained through different treatment alternatives. The purpose of this paper is to present a treatment that has not been described in the literature and which consists of the extraction of lower second molars and distal movement of the posterior segments by means of mandibular cervical headgear (MCH) and fixed appliances as a camouflage alternative. The force applied by the MCH was 250 gr per side (14hr/day). The total treatment time was 1 1/2 years. the extraction of lower second molars along with the use of mandibular cervical headgear is a good treatment alternative for camouflage in moderate Class III patients in order to obtain good occlusal relationships without affecting facial esthetics or producing marked dental compensations.

Thin-plate spline analysis of treatment effects of rapid maxillary expansion and face mask therapy in early Class III malocclusions.

PubMed

Baccetti, T; Franchi, L; McNamara, J A

1999-06-01

An effective morphometric method (thin-plate spline analysis) was applied to evaluate shape changes in the craniofacial configuration of a sample of 23 children with Class III malocclusions in the early mixed dentition treated with rapid maxillary expansion and face mask therapy, and compared with a sample of 17 children with untreated Class III malocclusions. Significant treatment-induced changes involved both the maxilla and the mandible. Major deformations consisted of forward displacement of the maxillary complex from the pterygoid region and of anterior morphogenetic rotation of the mandible, due to a significant upward and forward direction of growth of the mandibular condyle. Significant differences in size changes due to reduced increments in mandibular dimensions were associated with significant shape changes in the treated group.

Quality of Life and Self-Esteem of Female Orthognathic Surgery Patients.

PubMed

Jung, Min-Ho

2016-06-01

To evaluate the effect of severe malocclusion requiring orthognathic surgery on the self-esteem (SE) and quality of life (QOL) of female adult patients undergoing orthognathic surgery compared with a group with minor malocclusions seeking only orthodontic treatment. Female patients, aged 18 to 30 years, who had presented for an orthodontic consultation for correction of a malocclusion were enrolled during an 18-month period. In group 1, all the patients required 2-jaw surgery, and they were subdivided into those with a Class II or Class III malocclusion. This group was further subdivided into those with and without clinically significant asymmetry. A second comparison group was selected. These patients had minor malocclusion. Group 2 (the minor malocclusion group; MMG) included patients with a Class I molar relationship with less than 5 mm on the irregularity index in the upper anterior teeth. Each participant completed the Rosenberg's self-esteem scale (RSE) and the Orthognathic Quality of Life Questionnaire (OQLQ) before starting treatment. The RSE and OQLQ measurements were compared using 1-way analysis of variance and Scheffe's multiple comparison. The level of statistical significance was set at P < .05. The MMG group (n = 52) showed significantly better RSE and OQOL values compared with those with Class II (n = 37) and Class III (n = 47) malocclusion (P < .01). In the OQLQ measurements, the social aspects, aesthetics, and oral function scores were also better in the MMG group (P < .01). Only the awareness component did not reveal a significant difference. No significant differences were found in QOL or SE between those with Class II and Class III malocclusion. The influence of asymmetry on the RSE and OQLQ results was not significant in the Class II and III patients. Female adult orthognathic patients showed significant impairments in QOL and SE compared with those with mild malocclusion. Copyright © 2016 The American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

25 CFR 291.9 - What must the Secretary do at the end of the 60-day comment period if the State offers an...

Code of Federal Regulations, 2010 CFR

2010-04-01

... comment period if the State offers an alternative proposal for Class III gaming procedures? 291.9 Section... GAMING PROCEDURES § 291.9 What must the Secretary do at the end of the 60-day comment period if the State offers an alternative proposal for Class III gaming procedures? Within 30 days of receiving the State's...

[Size of lower jaw as an early indicator of skeletal class III development].

PubMed

Stojanović, Zdenka; Nikodijević, Angelina; Udovicić, Bozidar; Milić, Jasmina; Nikolić, Predrag

2008-08-01

Malocclusion of skeletal class III is a complex abnormality, with a characteristic sagital position of the lower jaw in front of the upper one. A higher level of prognatism of the lower jaw in relation to the upper one can be the consequence of its excessive length. The aim of this study was to find the differences in the length of the lower jaw in the children with skeletal class III and the children with normal sagital interjaw relation (skeletal class I) in the period of mixed dentition. After clinical and x-ray diagnostics, profile tele-x-rays of the head were analyzed in 60 examinees with mixed dentition, aged from 6 to 12 years. The examinees were divided into two groups: group 1--the children with skeletal class III and group 2--the children with skeletal class I. The length of the lower jaw, upper jaw and cranial base were measured. The proportional relations between the lengths measured within each group were established and the level of difference in the lengths measured and their proportions between the groups were estimated. No significant difference between the groups was found in the body length, ramus and the total length of the lower jaw. Proportional relation between the body length and the length of the lower jaw ramus and proportional relation between the forward cranial base and the lower jaw body were not significantly different. A significant difference was found in proportional relations of the total length of the lower jaw with the total lengths of cranial base and the upper jaw and proportional relation of the length of the lower and upper jaw body. Of all the analyzed parameters, the following were selected as the early indicators of the development of skeletal class III on the lower jaw: greater total length of the lower jaw, proportional to the total lengths of cranial base and theupper jaw, as well as greater length of the lower jaw body, proportional to the length of the upper jaw body.

The prevalence of abnormal metabolic parameters in obese and overweight children.

PubMed

Salvatore, Deborah; Satnick, Ava; Abell, Rebecca; Messina, Catherine R; Chawla, Anupama

2014-09-01

This retrospective study aimed to determine the prevalence of abnormal metabolic parameters in obese children and its correlation to the degree of obesity determined by body mass index (BMI). In total, 101 children seen at the Pediatric Gastroenterology Obesity Clinic at Stony Brook Children's University Hospital were enrolled in the study. The degree of obesity was characterized according to the following formula: (patient's BMI/BMI at 95th percentile) × 100%, with class I obesity >100%-120%, class II obesity >120%-140%, and class III obesity >140%. A set of metabolic parameters was evaluated in these patients. Frequency distributions of all study variables were examined using the χ(2) test of independence. Mean differences among the obesity classes and continuous measures were examined using 1-way analysis of variance. Within our study population, we found that 80% of our obese children had a low high-density lipoprotein (HDL) cholesterol level, 58% had elevated fasting insulin levels, and 32% had an elevated alanine aminotransferase (ALT) level. Class II obese children had a 2-fold higher ALT value when compared with class I children (P = .036). Fasting insulin, ALT, HDL cholesterol, and triglyceride levels trended with class of obesity. Obese children in classes II and III are at higher risk for developing abnormal laboratory values. We recommend obese children be further classified to reflect the severity of the obesity since this has predictive significance for comorbidities. Obesity classes I, II, and III could help serve as a screening tool to help communicate risk assessment. © 2013 American Society for Parenteral and Enteral Nutrition.

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-control aircraft. (2) Airplane class ratings— (i) Single-engine land. (ii) Multiengine land. (iii) Single-engine sea. (iv) Multiengine sea. (3) Rotorcraft class ratings— (i) Helicopter. (ii) Gyroplane. (4) Lighter-than-air class ratings— (i) Airship. (ii) Balloon. (5) Weight-shift-control aircraft class ratings...

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-control aircraft. (2) Airplane class ratings— (i) Single-engine land. (ii) Multiengine land. (iii) Single-engine sea. (iv) Multiengine sea. (3) Rotorcraft class ratings— (i) Helicopter. (ii) Gyroplane. (4) Lighter-than-air class ratings— (i) Airship. (ii) Balloon. (5) Weight-shift-control aircraft class ratings...

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-control aircraft. (2) Airplane class ratings— (i) Single-engine land. (ii) Multiengine land. (iii) Single-engine sea. (iv) Multiengine sea. (3) Rotorcraft class ratings— (i) Helicopter. (ii) Gyroplane. (4) Lighter-than-air class ratings— (i) Airship. (ii) Balloon. (5) Weight-shift-control aircraft class ratings...

78 FR 5327 - Medical Devices; Ophthalmic Devices; Classification of the Scleral Plug

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... Agency) is proposing to classify the scleral plug into class II (special controls), and proposing to... controls needed to provide reasonable assurance of their safety and effectiveness. The three categories of devices are class I (general controls), class II (special controls), and class III (premarket approval...

7 CFR 1000.76 - Payments by a handler operating a partially regulated distributing plant.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., compute a Class I differential price by subtracting Class III price from the current month's Class I price... by which the Class I differential price exceeds the producer price differential, both prices to be... Class I differential price nor the adjusted producer price differential shall be less than zero; (3) For...

25 CFR 522.5 - Disapproval of a class II ordinance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Disapproval of a class II ordinance. 522.5 Section 522.5 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.5 Disapproval of a class II...

Current Evidence Regarding the Diagnostic Methods for Pediatric Lumbar Spondylolisthesis: A Report From the Scoliosis Research Society Evidence Based Medicine Committee.

PubMed

Kim, Han Jo; Crawford, Charles H; Ledonio, Charles; Bess, Shay; Larson, A Noelle; Gates, Marilyn; Oetgen, Matthew; Sanders, James O; Burton, Douglas

Structured literature review. The Scoliosis Research Society (SRS) requested an assessment of the current state of peer-reviewed evidence regarding pediatric lumbar spondylolisthesis with the goal of identifying what is known and what gaps remain in further understanding the diagnostic methods for pediatric spondylolisthesis. Spondylolisthesis in the lumbar spine is common among children and adolescents and no formal synthesis of the published literature regarding diagnostic methods has been previously performed. A comprehensive literature search was performed. Abstracts were reviewed and data from included studies were analyzed by the committee. From 6600 initial citations with abstract, 663 articles underwent full-text review. The best available evidence for the clinical questions regarding diagnostic methods was provided by 26 included studies. Six of the studies were graded as Level III (retrospective comparative), and represent the current best available evidence whereas 20 of the studies were graded as Level IV (retrospective case series) evidence. No Level V (expert opinion) studies were included in the final list. None of the studies were graded as Level I or Level II. Plain radiography is the workhorse imaging modality for diagnosing spondylolisthesis. No association between radiologic grade of spondylolisthesis and clinical presentation were noted; however, grade III and IV slips more often required surgery, and increasing slip angles were associated with worse baseline outcome scores. There is Level III evidence that the Meyerding grade appears to be more accurate for measuring slip percentage whereas the Lonstein Slip angle and Dubousset Lumbosacral Kyphosis angles are the best for measuring lumbosacral kyphosis in spondylolisthesis. In addition, higher sacral table index, pelvic incidence, sacral slope, and lower sacral table angle were associated with spondylolisthesis. True incidence could not be determined by the current literature available. However, studies in adolescent athletes demonstrated an incidence of 6% to 7% across studies. The current "best available" evidence to guide the diagnosis and characterization of pediatric spondylolisthesis is presented. Future studies are needed to provide more high-quality evidence to answer these clinically relevant questions. Level III, review of Level III studies. Copyright © 2017 Scoliosis Research Society. Published by Elsevier Inc. All rights reserved.

Cephalomteric changes in airway dimensions with twin block therapy in growing Class II patients

PubMed Central

Vinoth, Santhana Krishnan; Thomas, Ashwin Varghese; Nethravathy, Ramya

2013-01-01

Introduction: Myofunctional appliances are commonly used for correction of skeletal Class II malrelationship. These appliances influence craniofacial and nasopharyngeal dimensions. Objectives: The present study was done to evaluate changes in airway with twin block therapy. Materials and Methods: Cephalometric assessment of airway was done in 25 growing children in the age group of 11-13 years with Class II skeletal pattern. All the patients were treated with twin block appliance. Pre and post treatment lateral cephalograms were taken to evaluate the changes in different airway and craniofacial dimensions during the treatment period. The average treatment duration was 14.5 months. Results: Airway: A significant increase was observed in upper and lower pharyngeal width and area of bony nasopharynx. Craniofacial dimension: There was a significant increase in effective mandibular length, ramal length and mandibular plane angle. There was an increase in SNB angle, which resulted in decreased ANB angle. Conclusion: There was a definite improvement in airway dimension following twin block therapy PMID:23946570

Temporomandibular disorders in growing patients after treatment of class II and III malocclusion with orthopaedic appliances: a systematic review.

PubMed

Jiménez-Silva, Antonio; Carnevali-Arellano, Romano; Venegas-Aguilera, Matías; Tobar-Reyes, Julio; Palomino-Montenegro, Hernán

2018-05-01

To determine if the use of orthopaedic appliances in growing patients applied to correct Class II and III malocclusion is related to the development of temporomandibular disorders (TMD). A systematic review was conducted between 1960 and July 2017, based on electronic databases: PubMed, Cochrane Library, Embase, Medline, Scopus, EBSCOhost, Scielo, Lilacs and Bireme. Controlled clinical trials (CCTs) and randomized controlled trials (RCTs) were identified. The articles were selected and analyzed by two authors independently. The quality of the evidence was determined according to the guidelines of the Cochrane Risk Bias Assessment Tool and the Cochrane Quality Study Guide. Seven articles were included, four CCTs and three RCTs. The studies were grouped according to malocclusion treatment in (a) class II appliances (n = 4) and (b) class III appliances (n = 3). The quality of evidence was low due to the high risk of bias, independent of the association reported. All studies concluded that the use of orthopaedic appliances would not contribute to the development of TMD. The quality of evidence available is insufficient to establish definitive conclusions, since the studies were very heterogeneous and presented a high risk of bias. However, it is suggested that the use of orthopaedic appliances to correct class II and III malocclusion in growing patients would not be considered as a risk factor for the development of TMD. High-quality RCTs are required to draw any definitive conclusions.

The nature of arms in spiral galaxies. IV. Symmetries and asymmetries

NASA Astrophysics Data System (ADS)

del Río, M. S.; Cepa, J.

1999-01-01

A Fourier analysis of the intensity distribution in the planes of nine spiral galaxies is performed. In terms of the arm classification scheme of \\cite[Elmegreen & Elmegreen (1987)]{ee87} seven of the galaxies have well-defined arms (classes 12 and 9) and two have intermediate-type arms (class 5). The galaxies studied are NGC 157, 753, 895, 4321, 6764, 6814, 6951, 7479 and 7723. For each object Johnson B-band images are available which are decomposed into angular components, for different angular periodicities. No a priori assumption is made concerning the form of the arms. The base function used in the analysis is a logarithmic spiral. The main result obtained with this method is that the dominant component (or mode) usually changes at corotation. In some cases, this change to a different mode persists only for a short range about corotation, but in other cases the change is permanent. The agreement between pitch angles found with this method and by fitting logarithmic spirals to mean arm positions (del Río & Cepa 1998b, hereafter \\cite[Paper III]{p3}) is good, except for those cases where bars are strong and dominant. Finally, a comparison is made with the ``symmetrization'' method introduced by Elmegreen, Elmegreen & Montenegro (1992, hereafter EEM), which also shows the different symmetric components.

Cephalometric evaluation of the effects of the Twin Block appliance in subjects with Class II, Division 1 malocclusion amongst different cervical vertebral maturation stages.

PubMed

Khoja, Aisha; Fida, Mubassar; Shaikh, Attiya

2016-06-01

To evaluate the cephalometric changes in skeletal, dentoalveolar and soft tissue variables induced by Clark's Twin Block (CTB) in Class II, Division 1 malocclusion patients and to compare these changes in different cervical vertebral maturation stages. Pre- and post-treatment/observation lateral cephalograms of 53 Class II, Division 1 malocclusion patients and 60 controls were compared to evaluate skeletal, dentoalveolar and soft tissue changes. Skeletal maturity was assessed according to cervical vertebral maturation stages. Pre- and post-treatment/observation mean changes and differences (T2-T1) were compared by means of Wilcoxon sign rank and Mann-Whitney U-tests, respectively. Intergroup comparisons between different cervical stages were performed by means of Kruskal-Wallis test and Mann-Whitney U-test (p ≤ 0.05) . When compared with controls, there was a significant reduction in ANB angle (p < 0.001), which was due to a change in SNB angle in CS-2 and CS-3 (p < 0.001), and in SNA (p < 0.001) and SNB (p = 0.016) angles in the CS-4 group. There was significant increase in the GoGn-SN angle in CS-2 (p = 0.007) and CS-4 (p = 0.024), and increase in Co-Gn and Go-Gn amongst all cervical stages (p < 0.05). There was significant decrease in U1-SN and increase in IMPA amongst all cervical stages (p < 0.05). There was significant retraction of the upper lip in CS-3 (p = 0.001), protrusion of the lower lip in CS-2 (p = 0.005), increase in nasolabial angle in CS-4 (p = 0.006) and Z-angle in CS-3 (p = 0.016), reduction in H-angle in CS-2 (p = 0.013) and CS-3 (p = 0.002) groups. When pre- and post-treatment mean differences were compared between different cervical stages, significant differences were found for SNA, SNB and UI-SN angles and overjet. . The Twin-Block along with the normal craniofacial growth improves facial esthetics in Class II, Division 1 malocclusion by changes in underlying skeletal and dentoalveolar structures. The favorable mandibular growth occurs during any of the cervical vertebral maturation stages, with more pronounced effect during CS-3 stage.

Cephalometric evaluation of the effects of the Twin Block appliance in subjects with Class II, Division 1 malocclusion amongst different cervical vertebral maturation stages

PubMed Central

Khoja, Aisha; Fida, Mubassar; Shaikh, Attiya

2016-01-01

ABSTRACT Objectives: To evaluate the cephalometric changes in skeletal, dentoalveolar and soft tissue variables induced by Clark's Twin Block (CTB) in Class II, Division 1 malocclusion patients and to compare these changes in different cervical vertebral maturation stages. Methods: Pre- and post-treatment/observation lateral cephalograms of 53 Class II, Division 1 malocclusion patients and 60 controls were compared to evaluate skeletal, dentoalveolar and soft tissue changes. Skeletal maturity was assessed according to cervical vertebral maturation stages. Pre- and post-treatment/observation mean changes and differences (T2-T1) were compared by means of Wilcoxon sign rank and Mann-Whitney U-tests, respectively. Intergroup comparisons between different cervical stages were performed by means of Kruskal-Wallis test and Mann-Whitney U-test (p ≤ 0.05) . Results: When compared with controls, there was a significant reduction in ANB angle (p < 0.001), which was due to a change in SNB angle in CS-2 and CS-3 (p < 0.001), and in SNA (p < 0.001) and SNB (p = 0.016) angles in the CS-4 group. There was significant increase in the GoGn-SN angle in CS-2 (p = 0.007) and CS-4 (p = 0.024), and increase in Co-Gn and Go-Gn amongst all cervical stages (p < 0.05). There was significant decrease in U1-SN and increase in IMPA amongst all cervical stages (p < 0.05). There was significant retraction of the upper lip in CS-3 (p = 0.001), protrusion of the lower lip in CS-2 (p = 0.005), increase in nasolabial angle in CS-4 (p = 0.006) and Z-angle in CS-3 (p = 0.016), reduction in H-angle in CS-2 (p = 0.013) and CS-3 (p = 0.002) groups. When pre- and post-treatment mean differences were compared between different cervical stages, significant differences were found for SNA, SNB and UI-SN angles and overjet. . Conclusions: The Twin-Block along with the normal craniofacial growth improves facial esthetics in Class II, Division 1 malocclusion by changes in underlying skeletal and dentoalveolar structures. The favorable mandibular growth occurs during any of the cervical vertebral maturation stages, with more pronounced effect during CS-3 stage. PMID:27409656

AGN Luminosity and Stellar Age: Two Missing Ingredients for AGN Unification as Seen with iPTF Supernovae

NASA Astrophysics Data System (ADS)

Villarroel, Beatriz; Nyholm, Anders; Karlsson, Torgny; Comerón, Sébastien; Korn, Andreas J.; Sollerman, Jesper; Zackrisson, Erik

2017-03-01

Active galactic nuclei (AGNs) are extremely powerful cosmic objects, driven by accretion of hot gas upon super-massive black holes. The zoo of AGN classes is divided into two major groups, with Type-1 AGNs displaying broad Balmer emission lines and Type-2 narrow ones. For a long time it was believed that a Type-2 AGN is a Type-1 AGN viewed through a dusty kiloparsec-sized torus, but an emerging body of observations suggests more than just the viewing angle matters. Here we report significant differences in supernova (SN) counts and classes in the first study to date of SNe near Type-1 and Type-2 AGN host galaxies, using data from the intermediate Palomar Transient Factory, the Sloan Digital Sky Survey Data Release 7, and Galaxy Zoo. We detect many more SNe in Type-2 AGN hosts (size of effect ˜5.1σ) compared to Type-1 hosts, which shows that the two classes of AGN are located inside host galaxies with different properties. In addition, Type-1 and Type-2 AGNs that are dominated by star formation according to Wide-field Infrared Survey Explorer colors {m}W1-{m}W2< 0.5 and are matched in 22 μm absolute magnitude differ by a factor of ten in L[O III] λ5007 luminosity, suggesting that when residing in similar types of host galaxies Type-1 AGNs are much more luminous. Our results demonstrate two more factors that play an important role in completing the current picture: the age of stellar populations and the AGN luminosity. This has immediate consequences for understanding the many AGN classes and galaxy evolution.

Hemodynamic-GUIDEd Management of Heart Failure

ClinicalTrials.gov

2018-03-29

Heart Failure; Heart Failure, Systolic; Heart Failure, Diastolic; Heart Failure NYHA Class II; Heart Failure NYHA Class III; Heart Failure NYHA Class IV; Heart Failure，Congestive; Heart Failure With Reduced Ejection Fraction; Heart Failure With Normal Ejection Fraction; Heart Failure; With Decompensation

Annual changes in radiographic indices of the spine in cerebral palsy patients.

PubMed

Lee, Seung Yeol; Chung, Chin Youb; Lee, Kyoung Min; Kwon, Soon-Sun; Cho, Kyu-Jung; Park, Moon Seok

2016-03-01

We estimated the annual changes in radiographic indices of the spine in cerebral palsy (CP) patients and analyzed the factors that influence its progression rate. We included CP patients who had undergone whole-spine radiography more than twice and were followed for at least 1 year. The scoliosis Cobb angle, coronal balance, apical vertebral translation, apical rotation, and pelvic obliquity were measured on anteroposterior (AP) radiographs; thoracic kyphosis and lumbar lordosis angles, and sagittal balance was measured on lateral radiographs; and migration percentage was measured on AP hip radiographs to determine hip instability. For each gross motor function classification system (GMFCS) level, the Cobb angles, apical vertebral translation, coronal and sagittal balance, and pelvic obliquity were adjusted by multiple factors with a linear mixed model. A total of 184 patients (774 radiographs) were included in this study. There was no significant annual change in scoliosis Cobb, thoracic kyphosis, and lumbar lordosis angles in the GMFCS level I-II and III groups. In the GMFCS level IV-V group, there was an annual increase of 3.4° in the scoliosis Cobb angle (p = 0.020). The thoracic kyphosis angle increased by 2.2° (p = 0.018) annually in the GMFCS level IV-V group. Apical vertebral translation increased by 5.4 mm (p = 0.029) annually in the GMFCS level IV-V group. Progression of coronal and sagittal balance and pelvic obliquity with aging were not statistically significant. Sex, hip instability, hip surgery, and triradiate cartilage did not affect the progression of scoliosis and the balance of the spine and pelvis. The scoliosis Cobb angle, thoracic kyphosis angle, and apical vertebral translation in the GMFCS level IV-V CP patients progressed with age. These findings can predict radiographic progression of scoliosis in CP patients.

Evaluation of Bone Thickness and Density in the Lower Incisors' Region in Adults with Different Types of Skeletal Malocclusion using Cone-beam Computed Tomography.

PubMed

Al-Masri, Maram M N; Ajaj, Mowaffak A; Hajeer, Mohammad Y; Al-Eed, Muataz S

2015-08-01

To evaluate the bone thickness and density in the lower incisors' region in orthodontically untreated adults, and to examine any possible relationship between thickness and density in different skeletal patterns using cone-beam computed tomography (CBCT). The CBCT records of 48 patients were obtained from the archive of orthodontic department comprising three groups of malocclusion (class I, II and III) with 16 patients in each group. Using OnDemand 3D software, sagittal sections were made for each lower incisor. Thicknesses and densities were measured at three levels of the root (cervical, middle and apical regions) from the labial and lingual sides. Accuracy and reliability tests were undertaken to assess the intraobserver reliability and to detect systematic error. Pearson correlation coefficients were calculated and one-way analysis of variance (ANOVA) was employed to detect significant differences among the three groups of skeletal malocclusion. Apical buccal thickness (ABT) in the four incisors was higher in class II and I patients than in class III patients (p < 0.05). There were significant differences between buccal and lingual surfaces at the apical and middle regions only in class II and III patients. Statistical differences were found between class I and II patients for the cervical buccal density (CBD) and between class II and III patients for apical buccal density (ABD). Relationship between bone thickness and density values ranged from strong at the cervical regions to weak at the apical regions. Sagittal skeletal patterns affect apical bone thickness and density at buccal surfaces of the four lower incisors' roots. Alveolar bone thickness and density increased from the cervical to the apical regions.

Cephalometric evaluation of maxillary retrognathism cases treated with FR-3 appliance.

PubMed

Biren, S; Erverdi, N

1993-09-01

The purpose of this investigation was to evaluate the efficiency of the FR-3 appliance on functional Cl III malocclusion cases. A total of 45 functional Cl III cases were chosen from a general clinic intake of which 25 were treated with the FR-3 appliance and 20 were untreated and were taken as a control group. Patients that were treated with FR-3 had the following characteristics: Cl III with maxillary deficiency; functional anterior cross-bite; absence of anterior open-bite; patients in mixed dentition. The mean age in the treatment group was 8.4 years 8.8 years in the control group. The observation period was one year for both groups. The results were as follows: Sagittal forward growth stimulation was not observed in the maxilla. Mandibular growth was redirected in the vertical direction. The SNB angle decreased in that the mandible rotated downward and backward. The ANB angle increased. There was an increase in total and lower anterior facial height and reduction in the overbite. Another skeletal change observed was the increase in the cranial flexure angle. Improved dental results were a significant amount of overjet increase and a decrease in the IMPA. There was also a beneficial effect on the soft tissue profile.

SAGE III/ISS L1B Solar Event Transmission Data (Native) V5 (g3btb)

Atmospheric Science Data Center

2017-12-21

SAGE III/ISS L1B Solar Event Transmission Data (Native) V5 (g3btb)   Project Title:  ... present Temporal Resolution:  1 file per event File Format:  BINARY Tools:  Earthdata ... Radiation Longwave Radiation Shortwave Radiation Event Tag Event Type Obs Beta Angle Order Data:  ...

SAGE III/ISS L2 Solar Event Species Profiles (HDF-EOS) V5 (g3bssp)

Atmospheric Science Data Center

2017-12-21

SAGE III/ISS L2 Solar Event Species Profiles (HDF-EOS) V5 (g3bssp)   Project ... present Temporal Resolution:  1 file per event File Format:  HDF-4 Tools:  Earthdata ... Radiation Longwave Radiation Shortwave Radiation Event Tag Event Type Obs Beta Angle Order Data:  ...

SAGE III/ISS L2 Lunar Event Species Profiles (HDF-EOS) V5 (g3blsp)

Atmospheric Science Data Center

2018-01-04

SAGE III/ISS L2 Lunar Event Species Profiles (HDF-EOS) V5 (g3blsp)   Project ... present Temporal Resolution:  1 file per event File Format:  HDF-4 Tools:  Earthdata ... Radiation Longwave Radiation Shortwave Radiation Event Tag Event Type Obs Beta Angle Order Data:  ...

Triple innominate osteotomy for Legg-Calvé-Perthes disease in children: does the lateral coverage change with time?

PubMed

Hosalkar, Harish; Munhoz da Cunha, Ana Laura; Baldwin, Keith; Ziebarth, Kai; Wenger, Dennis R

2012-09-01

Triple innominate osteotomy (TIO) is one of the modalities of surgical containment in Legg-Calvé-Perthes disease (LCPD). However, overcoverage with TIO can lead to pincer impingement. We therefore asked (1) whether TIO contained the femoral head in Catterall Stages III and IV of LCPD; (2) whether the center-edge (CE) angle, acetabular roof arc angle (ARA), and Sharp's angle changed during the growing years; and (3) what percentage of patients had radiographic evidence of pincer impingement beyond a minimum followup of 3 years. We identified 19 children who had 20 TIOs performed for Catterall Stages III and IV LCPD. Two blinded observers assessed sequential radiographs. Each observer made two sets of readings more than 2 weeks apart. Femoral head extrusion index, CE angle of Wiberg, ARA, and Sharp's angle were measured. Minimum followup was 3 years to document continued acetabular growth (mean, 3.8 years; range, 3-7 years). All patients exhibited femoral head containment at last followup. Eleven of 20 hips demonstrated no radiographic evidence of pincer morphology beyond a minimum followup of 3 years (mean, 3.8 years). Patients with CE angle corrected to 44° or less and an ARA of greater than -6° after TIO did not demonstrate a pincer morphology at last followup. TIO resulted in femoral head containment in all cases. Lateral acetabular coverage changed during the growing years in all patients. Surgical correction beyond 44° of CE angle and -6° of ARA should be avoided to prevent pincer morphology later.

Surgical-orthodontic correction of a Class III dentofacial deformity.

PubMed

Devanna, Raghu; Kakkirala, Neelima

2010-04-01

This case report describes the surgical-orthodontic treatment of a 26-year-old post-pubertal male patient with a Class III dentofacial deformity. In the pre-surgical orthodontic phase of treatment, a reverse overjet of 5.5 mm was created and arch compatibility was obtained. A mandibualr set back with BSSO was performed during surgery to restore ideal overjet, overbite, occlusion and optimal esthetics. After 1 year of treatment, the results remained stable.

[Orthodontic treatment of Class III patients with mandibular asymmetry].

PubMed

Duan, Yin-Zhong; Huo, Na; Chen, Lei; Chen, Xue-Peng; Lin, Yang

2008-12-01

To investigate the treatment outcome of Class III patients with dental, functional and mild skeletal mandibular asymmetry. Thirty-five patients (14 males and 21 females) with dental, functional and mild skeletal mandibular asymmetry were selected. The age range of the patients was 7 - 22 years with a mean age of 16.5 years. Dental mandibular asymmetry was treated with expansion of maxillary arch to help the mandible returning to normal position. Functional mandibular asymmetry was treated with activator or asymmetrical protraction and Class III elastics. Mild skeletal mandibular asymmetry was treated with camouflage treatment. Good occlusal relationships were achieved and facial esthetics was greatly improved after orthodontic treatment in patients with dental and functional mandibular asymmetry. However, patients with skeletal mandibular asymmetry should be treated with both extraction and genioplasty. Orthodontic treatment was suitable for patients with dental and functional mandibular asymmetry, while combined orthodontics and surgery could get good results in patients with skeletal mandibular asymmetry.

Corticotomy-assisted orthodontic camouflage in a class III adult patient with a severe transverse discrepancy.

PubMed

Gracco, Antonio; Finotti, Marco; Bruno, Giovanni; de Stefani, Alberto

2018-04-06

A 25-year-old man presented with a maxillary transverse discrepancy, posterior cross bite, anterior open bite, molar and canine class III. Treatment included a corticotomy in the upper lateral and posterior teeth, a palatal expansor and a sectional archwire to assist the expansion. The following treatment phase included bonding with Incognito System lingual appliance, interproximal reduction to solve the crowding and bite blocks to control the verticality. Two months after the bonding intermaxillary class III elastics were used to solve the sagittal discrepancy and eight months after the bonding vertical elastics were used in order to solve the anterior open bite until the end of the treatment. A Boston splint was applied for the upper arch, an essix splint was applied for the lower arch. The patient compliance was an essential aspect in the success of the orthodontic treatment. Copyright © 2018. Published by Elsevier Masson SAS.

A new modified tandem appliance for management of developing Class III malocclusion.

PubMed

Sukh, Ram; Singh, Gyan P; Tandon, Pradeep

2013-10-01

Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

Independent Review of the Defense Logistics Agencys Roles and Missions

DTIC Science & Technology

2014-12-01

remaining wholesale consumables missions of tires, packaged petroleum, oils , and lubricants, and gases and cylinders were transferred from the...housekeeping supplies and equipment. Class III: Petroleum, oils , and lubricants. Class IV: Construction materials. Class V: Ammunition. Class VI...own appropriated funds that are deposited 9 The Construction and Equipment program within DLA Troop Support provides some Class VII non- weapons

25 CFR 522.11 - Individually owned class II gaming operations operating on September 1, 1986.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Individually owned class II gaming operations operating on September 1, 1986. 522.11 Section 522.11 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING...

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... (iii) Glider. (iv) Lighter-than-air. (v) Powered-lift. (vi) Powered parachute. (vii) Weight-shift...—Airplane. (ii) Instrument—Helicopter. (iii) Instrument—Powered-lift. (c) The following ratings are placed.... (iii) Glider. (iv) Powered-lift. (2) Airplane class ratings— (i) Single-engine. (ii) Multiengine. (3...

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... (iii) Glider. (iv) Lighter-than-air. (v) Powered-lift. (vi) Powered parachute. (vii) Weight-shift...—Airplane. (ii) Instrument—Helicopter. (iii) Instrument—Powered-lift. (c) The following ratings are placed.... (iii) Glider. (iv) Powered-lift. (2) Airplane class ratings— (i) Single-engine. (ii) Multiengine. (3...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2011 CFR

2011-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

Statewide land cover derived from multiseasonal Landsat TM data: A retrospective of the WISCLAND project

USGS Publications Warehouse

Reese, H.M.; Lillesand, T.M.; Nagel, D.E.; Stewart, J.S.; Goldmann, R.A.; Simmons, T.E.; Chipman, J.W.; Tessar, P.A.

2002-01-01

Landsat Thematic Mapper (TM) data were the basis in production of a statewide land cover data set for Wisconsin, undertaken in partnership with U.S. Geological Survey's (USGS) Gap Analysis Program (GAP). The data set contained seven classes comparable to Anderson Level I and 24 classes comparable to Anderson Level II/III. Twelve scenes of dual-date TM data were processed with methods that included principal components analysis, stratification into spectrally consistent units, separate classification of upland, wetland, and urban areas, and a hybrid supervised/unsupervised classification called "guided clustering." The final data had overall accuracies of 94% for Anderson Level I upland classes, 77% for Level II/III upland classes, and 84% for Level II/III wetland classes. Classification accuracies for deciduous and coniferous forest were 95% and 93%, respectively, and forest species' overall accuracies ranged from 70% to 84%. Limited availability of acceptable imagery necessitated use of an early May date in a majority of scene pairs, perhaps contributing to lower accuracy for upland deciduous forest species. The mixed deciduous/coniferous forest class had the lowest accuracy, most likely due to distinctly classifying a purely mixed class. Mixed forest signatures containing oak were often confused with pure oak. Guided clustering was seen as an efficient classification method, especially at the tree species level, although its success relied in part on image dates, accurate ground troth, and some analyst intervention. ?? 2002 Elsevier Science Inc. All rights reserved.

Changes in the pattern of patients receiving surgical-orthodontic treatment

PubMed Central

Proffit, William R.; Jackson, Tate H.; Turvey, Timothy A.

2014-01-01

Introduction The characteristics of patients who seek and accept orthognathic surgery appear to be changing over time but have not been well documented in the 21st century. Methods Records for patients who had orthognathic surgery at the University of North Carolina from 1996 to 2000 and from 2006 to 2010 were reviewed to collect data for changes in the prevalence of patients with mandibular deficiency (Class II), maxillary deficiency or mandibular prognathism (Class III), long face, and asymmetry problems. The changes were compared with those in previous time periods and at other locations. Results Between 1996 and 2000 and between 2006 and 2010, the percentage of Class III patients increased from 35% to 54%, and the percentage of Class II patients decreased from 59% to 41%, while the percentages for long face and asymmetry showed little change. The decrease in Class II patients was accentuation of a long-term trend; the increase in Class III patients occurred only after the turn of the century. Conclusions A similar but less-marked change has been noted at some but not all other locations in the United States. It appears to be related primarily to an increase in the numbers of African Americans, Native Americans, Hispanics, and Asians who now are seeking surgical treatment, but it also has been affected by changes in where orthognathic surgery is performed, decisions by third-party payers (insurance and Medicaid) about coverage for treatment, and the availability of nonsurgical orthodontic treatment options for Class II patients. PMID:23726329

New Brown Dwarf Discs in Upper Scorpius Observed with WISE

NASA Technical Reports Server (NTRS)

Dawson, P.; Scholz, A.; Ray, T. P.; Natta, A.; Marsh, K. A.; Padgett, D.; Ressler, M. E.

2013-01-01

We present a census of the disc population for UKIDSS selected brown dwarfs in the 5-10 Myr old Upper Scorpius OB association. For 116 objects originally identified in UKIDSS, the majority of them not studied in previous publications, we obtain photometry from the Wide-Field Infrared Survey Explorer data base. The resulting colour magnitude and colour colour plots clearly show two separate populations of objects, interpreted as brown dwarfs with discs (class II) and without discs (class III). We identify 27 class II brown dwarfs, 14 of them not previously known. This disc fraction (27 out of 116, or 23%) among brown dwarfs was found to be similar to results for K/M stars in Upper Scorpius, suggesting that the lifetimes of discs are independent of the mass of the central object for low-mass stars and brown dwarfs. 5 out of 27 discs (19 per cent) lack excess at 3.4 and 4.6 microns and are potential transition discs (i.e. are in transition from class II to class III). The transition disc fraction is comparable to low-mass stars.We estimate that the time-scale for a typical transition from class II to class III is less than 0.4 Myr for brown dwarfs. These results suggest that the evolution of brown dwarf discs mirrors the behaviour of discs around low-mass stars, with disc lifetimes of the order of 5 10 Myr and a disc clearing time-scale significantly shorter than 1 Myr.

Soft tissue response in orthognathic surgery patients treated by bimaxillary osteotomy: cephalometry compared with 2-D photogrammetry.

PubMed

Rustemeyer, Jan; Martin, Alice

2013-03-01

Since improvement of facial aesthetics after orthognathic surgery moves increasingly into the focus of patients, prediction of soft tissue response to hard tissue movement becomes essential for planning. The aim of this study was to assess the facial soft tissue response in skeletal class II and III patients undergoing orthognathic surgery and to compare the potentials of cephalometry and two-dimensional (2-D) photogrammetry for predicting soft tissue changes. Twenty-eight patients with class II relationship and 33 with class III underwent bimaxillary surgery. All subjects had available both a traced lateral cephalogram and a traced lateral photogram taken pre- and postsurgery in natural head position (median follow-up, 9.4 ± 0.6 months). Facial convexity and lower lip length were highly correlated with hard tissue movements cephalometrically in class III patients and 2-D photogrammetrically in both classes. In comparison, cephalometric correlations for class II patients were weak. Correlations of hard and soft tissue movements between pre- and postoperative corresponding landmarks in horizontal and vertical planes were significant for cephalometry and 2-D photogrammetry. No significant difference was found between cephalometry and 2-D photogrammetry with respect to soft to hard tissue movement ratios. This study revealed that cephalometry is still a feasible standard for evaluating and predicting outcomes in routine orthognathic surgery cases. Accuracy could be enhanced with 2-D photogrammetry, especially in class II patients.

Practice guideline: Idiopathic normal pressure hydrocephalus: Response to shunting and predictors of response

PubMed Central

Halperin, John J.; Kurlan, Roger; Schwalb, Jason M.; Cusimano, Michael D.; Gronseth, Gary; Gloss, David

2015-01-01

Objective: We evaluated evidence for utility of shunting in idiopathic normal pressure hydrocephalus (iNPH) and for predictors of shunting effectiveness. Methods: We identified and classified relevant published studies according to 2004 and 2011 American Academy of Neurology methodology. Results: Of 21 articles, we identified 3 Class I articles. Conclusions: Shunting is possibly effective in iNPH (96% chance subjective improvement, 83% chance improvement on timed walk test at 6 months) (3 Class III). Serious adverse event risk was 11% (1 Class III). Predictors of success included elevated Ro (1 Class I, multiple Class II), impaired cerebral blood flow reactivity to acetazolamide (by SPECT) (1 Class I), and positive response to either external lumbar drainage (1 Class III) or repeated lumbar punctures. Age may not be a prognostic factor (1 Class II). Data are insufficient to judge efficacy of radionuclide cisternography or aqueductal flow measurement by MRI. Recommendations: Clinicians may choose to offer shunting for subjective iNPH symptoms and gait (Level C). Because of significant adverse event risk, risks and benefits should be carefully weighed (Level B). Clinicians should inform patients with iNPH with elevated Ro and their families that they have an increased chance of responding to shunting compared with those without such elevation (Level B). Clinicians may counsel patients with iNPH and their families that (1) positive response to external lumbar drainage or to repeated lumbar punctures increases the chance of response to shunting, and (2) increasing age does not decrease the chance of shunting being successful (both Level C). PMID:26644048

Postural effects on intracranial pressure: modeling and clinical evaluation.

PubMed

Qvarlander, Sara; Sundström, Nina; Malm, Jan; Eklund, Anders

2013-11-01

The physiological effect of posture on intracranial pressure (ICP) is not well described. This study defined and evaluated three mathematical models describing the postural effects on ICP, designed to predict ICP at different head-up tilt angles from the supine ICP value. Model I was based on a hydrostatic indifference point for the cerebrospinal fluid (CSF) system, i.e., the existence of a point in the system where pressure is independent of body position. Models II and III were based on Davson's equation for CSF absorption, which relates ICP to venous pressure, and postulated that gravitational effects within the venous system are transferred to the CSF system. Model II assumed a fully communicating venous system, and model III assumed that collapse of the jugular veins at higher tilt angles creates two separate hydrostatic compartments. Evaluation of the models was based on ICP measurements at seven tilt angles (0-71°) in 27 normal pressure hydrocephalus patients. ICP decreased with tilt angle (ANOVA: P < 0.01). The reduction was well predicted by model III (ANOVA lack-of-fit: P = 0.65), which showed excellent fit against measured ICP. Neither model I nor II adequately described the reduction in ICP (ANOVA lack-of-fit: P < 0.01). Postural changes in ICP could not be predicted based on the currently accepted theory of a hydrostatic indifference point for the CSF system, but a new model combining Davson's equation for CSF absorption and hydrostatic gradients in a collapsible venous system performed well and can be useful in future research on gravity and CSF physiology.

Magnetic exchange in {Gd(III)-radical} complexes: method assessment, mechanism of coupling and magneto-structural correlations.

PubMed

Gupta, Tulika; Rajeshkumar, Thayalan; Rajaraman, Gopalan

2014-07-28

Density functional studies have been performed on ten different {Gd(III)-radical} complexes exhibiting both ferro and antiferromagnetic exchange interaction with an aim to assess a suitable exchange-correlation functional within DFT formalism. This study has also been extended to probe the mechanism of magnetic coupling and to develop suitable magneto-structural correlations for this pair. Our method assessments reveal the following order of increasing accuracy for the evaluation of J values compared to experimental coupling constants: B(40HF)LYP < BHandHLYP < TPSSH < PW91 < PBE < BP86 < OLYP < BLYP < PBE0 < X3LYP < B3LYP < B2PLYP. Grimme's double-hybrid functional is found to be superior compared to other functionals tested and this is followed very closely by the conventional hybrid B3LYP functional. At the basis set front, our calculations reveal that the incorporation of relativistic effect is important in these calculations and the relativistically corrected effective core potential (ECP) basis set is found to yield better Js compared to other methods. The supposedly empty 5d/6s/6p orbitals of Gd(III) are found to play an important role in the mechanism of magnetic coupling and different contributions to the exchange terms are probed using Molecular Orbital (MO) and Natural Bond Orbital (NBO) analysis. Magneto-structural correlations for Gd-O distances, Gd-O-N angles and Gd-O-N-C dihedral angles are developed where the bond angles as well as dihedral angle parameters are found to dictate the sign and strength of the magnetic coupling in this series.

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2010 CFR

2010-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2012 CFR

2012-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2014 CFR

2014-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2013 CFR

2013-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2011 CFR

2011-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

The Impact of Body Mass Index on Abdominal Wall Reconstruction Outcomes: A Comparative Study

PubMed Central

Giordano, Salvatore A; Garvey, Patrick B; Baumann, Donald P; Liu, Jun; Butler, Charles E

2016-01-01

Background Obesity and higher body mass index (BMI) may be associated with higher rates of wound healing complications and hernia recurrence rates following complex abdominal wall reconstruction (AWR). We hypothesized that higher BMI’s result in higher rates of postoperative wound healing complications but similar rates of hernia recurrence in AWR patients. Methods We included 511 consecutive patients who underwent AWR with underlay mesh. Patients were divided into three groups on the basis of preoperative BMI: <30 kg/m2 (non-obese), 30–34.9 kg/m2 (class I obesity) and ≥35 kg/m2 (class II/III obesity). We compared postoperative outcomes among these three groups. Results Class I and class II/III obesity patients had higher surgical site occurrence rates than non-obese patients (26.4% vs. 14.9%; p=0.006 and 36.8% vs. 14.9%; p<0.001, respectively) and higher overall complication rates (37.9% vs. 24.7%; p=0.007 and 43.4% vs. 24.7%; p<0.001, respectively). Similarly, obese patients had significantly higher skin dehiscence (19.3% vs 7.2%; p<0.001 and 26.5% vs 7.2%; p<0.001, respectively) and fat necrosis rates (10.0% vs 2.1%; p=0.001 and 11.8% vs 2.1%; p<0.001, respectively) than non-obese patients. Obesity class II/III patients had higher infection and seroma rates than non-obese patients (9.6% vs 4.3%; p=0.041 and 8.1% vs 2.1%; p=0.006, respectively). However, class I and class II/III obesity patients experienced hernia recurrence rates (11.4% vs. 7.7%; p=0.204 and 10.3% vs. 7.7%; p=0.381, respectively) and freedom from hernia recurrence (overall log-rank p=0.41) similar to non-obese patients. Conclusions Hernia recurrence rates do not appear to be affected by obesity on long-term follow-up in AWR. PMID:28445378

Single-Dose Oritavancin Treatment of Acute Bacterial Skin and Skin Structure Infections: SOLO Trial Efficacy by Eron Severity and Management Setting.

PubMed

Deck, Daniel H; Jordan, Jennifer M; Holland, Thomas L; Fan, Weihong; Wikler, Matthew A; Sulham, Katherine A; Ralph Corey, G

2016-09-01

Introduction of new antibiotics enabling single-dose administration, such as oritavancin may significantly impact site of care decisions for patients with acute bacterial skin and skin structure infections (ABSSSI). This analysis compared the efficacy of single-dose oritavancin with multiple-dose vancomycin in patients categorized according to disease severity via modified Eron classification and management setting. SOLO I and II were phase 3 studies evaluating single-dose oritavancin versus 7-10 days of vancomycin for treatment of ABSSSI. Patient characteristics were collected at baseline and retrospectively analyzed. Study protocols were amended, allowing outpatient management at the discretion of investigators. In this post hoc analysis, patients were categorized according to a modified Eron severity classification and management setting (outpatient vs. inpatient) and the efficacy compared. Overall, 1910 patients in the SOLO trials were categorized into Class I (520, 26.5%), II (790, 40.3%), and III (600, 30.6%). Of the 767 patients (40%) in the SOLO trials who were managed entirely in the outpatient setting 40.3% were categorized as Class II and 30.6% were Class III. Clinical efficacy was similar between oritavancin and vancomycin treatment groups, regardless of severity classification and across inpatient and outpatient settings. Class III patients had lower response rates (oritavancin 73.3%, vancomycin 76.6%) at early clinical evaluation when compared to patients in Class I (82.6%) or II (86.1%); however, clinical cure rates at the post-therapy evaluation were similar for Class III patients (oritavancin 79.8%, vancomycin 79.9%) when compared to Class I and II patients (79.1-85.7%). Single-dose oritavancin therapy results in efficacy comparable to multiple-dose vancomycin in patients categorized according to modified Eron disease severity classification regardless of whether management occurred in the inpatient or outpatient setting. The Medicines Company, Parsippany, NJ, USA. ClinicalTrials.gov identifiers, NCT01252719 (SOLO I) and NCT01252732 (SOLO II).

49 CFR 173.167 - Consumer commodities.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-toxic aerosols only), Class 3 (Packing Group II and III only), Division 6.1 (Packing Group III only... packagings intended to contain liquids must be capable of meeting the pressure differential requirements (75...

Lip line changes in Class III facial asymmetry patients after orthodontic camouflage treatment, one-jaw surgery, and two-jaw surgery: A preliminary study.

PubMed

Lee, Gung-Chol; Yoo, Jo-Kwang; Kim, Seong-Hun; Moon, Cheol-Hyun

2017-03-01

To evaluate the effects of orthodontic camouflage treatment (OCT), one-jaw surgery, and two-jaw surgery on the correction of lip line cant (LLC) and to examine factors affecting the correction of LLC in Class III craniofacial asymmetry patients. A sample of 30 Class III craniofacial asymmetry patients was divided into OCT (n = 10), one-jaw surgery (n = 10), and two-jaw surgery (n = 10) groups such that the pretreatment LLC was similar in each group. Pretreatment and posttreatment cone-beam computed tomography scans were used to measure dental and skeletal parameters and LLC. Pretreatment and posttreatment measurements were compared within groups and between groups. Pearson's correlation tests and multiple regression analyses were performed to investigate factors affecting the amount and rate of LLC correction. The average LLC correction was 1.00° in the one-jaw surgery group, and in the two-jaw surgery group, it was 1.71°. In the OCT group it was -0.04°, which differed statistically significantly from the LLC correction in the other two groups. The amount and rate of LLC correction could be explained by settling of skeletal discrepancies or LLC at pretreatment with goodness of fit percentages of approximately 82% and 41%, respectively. Orthognathic surgery resulted in significant correction of LLC in Class III craniofacial asymmetry patients, while OCT did not.

Control of lower incisor inclination with a completely customized lingual appliance for dentoalveolar compensation of class III malocclusion.

PubMed

Lossdörfer, Stefan; Schwestka-Polly, Rainer; Wiechmann, Dirk

2013-09-01

Bracket slots and orthodontic archwires offering high dimensional precision are needed for fully customized lingual appliances. We aimed to investigate whether high-precision appliances of this type enable dentoalveolar compensation of class III malocclusion so that lower incisor inclination at the end of treatment will closely match the anticipated situation as defined in a pretreatment setup. This retrospective study included a total of 34 consecutive patients who had worn a fully customized lingual appliance to achieve dentoalveolar compensation for class III malocclusion by intermaxillary elastics, or proximal enamel reduction, or extraction of teeth in one or both jaws. Casts fabricated at different points in time were three-dimensionally scanned to analyze how precisely the lower incisor inclinations envisioned in the setup were implemented in clinical practice. Aside from minor deviations of ±3.75°, the lower incisor inclinations were clinically implemented as planned even in patients with major sagittal discrepancies. Treatment goals predefined in a setup of dentoalveolar compensation for class III malocclusion can be very precisely achieved via a customized lingual appliance. Correct planning can prevent undesirable lingual tipping of the lower incisors. This finding should not encourage a more liberal use of dentoalveolar compensation, but it should heighten clinicians' awareness of how essential it is to sufficiently consider the individual anatomy of the dentoalveolar complex during treatment planning.

Feasibility of Using Microsoft Kinect to Assess Upper Limb Movement in Type III Spinal Muscular Atrophy Patients

PubMed Central

Siebourg-Polster, Juliane; Wolf, Detlef; Czech, Christian; Bonati, Ulrike; Fischer, Dirk; Khwaja, Omar; Strahm, Martin

2017-01-01

Although functional rating scales are being used increasingly as primary outcome measures in spinal muscular atrophy (SMA), sensitive and objective assessment of early-stage disease progression and drug efficacy remains challenging. We have developed a game based on the Microsoft Kinect sensor, specifically designed to measure active upper limb movement. An explorative study was conducted to determine the feasibility of this new tool in 18 ambulant SMA type III patients and 19 age- and gender-matched healthy controls. Upper limb movement was analysed elaborately through derived features such as elbow flexion and extension angles, arm lifting angle, velocity and acceleration. No significant differences were found in the active range of motion between ambulant SMA type III patients and controls. Hand velocity was found to be different but further validation is necessary. This study presents an important step in the process of designing and handling digital biomarkers as complementary outcome measures for clinical trials. PMID:28122039

Feasibility of Using Microsoft Kinect to Assess Upper Limb Movement in Type III Spinal Muscular Atrophy Patients.

PubMed

Chen, Xing; Siebourg-Polster, Juliane; Wolf, Detlef; Czech, Christian; Bonati, Ulrike; Fischer, Dirk; Khwaja, Omar; Strahm, Martin

2017-01-01

Although functional rating scales are being used increasingly as primary outcome measures in spinal muscular atrophy (SMA), sensitive and objective assessment of early-stage disease progression and drug efficacy remains challenging. We have developed a game based on the Microsoft Kinect sensor, specifically designed to measure active upper limb movement. An explorative study was conducted to determine the feasibility of this new tool in 18 ambulant SMA type III patients and 19 age- and gender-matched healthy controls. Upper limb movement was analysed elaborately through derived features such as elbow flexion and extension angles, arm lifting angle, velocity and acceleration. No significant differences were found in the active range of motion between ambulant SMA type III patients and controls. Hand velocity was found to be different but further validation is necessary. This study presents an important step in the process of designing and handling digital biomarkers as complementary outcome measures for clinical trials.

Computational Analysis of the G-III Laminar Flow Glove

NASA Technical Reports Server (NTRS)

Malik, Mujeeb R.; Liao, Wei; Lee-Rausch, Elizabeth M.; Li, Fei; Choudhari, Meelan M.; Chang, Chau-Lyan

2011-01-01

Under NASA's Environmentally Responsible Aviation Project, flight experiments are planned with the primary objective of demonstrating the Discrete Roughness Elements (DRE) technology for passive laminar flow control at chord Reynolds numbers relevant to transport aircraft. In this paper, we present a preliminary computational assessment of the Gulfstream-III (G-III) aircraft wing-glove designed to attain natural laminar flow for the leading-edge sweep angle of 34.6deg. Analysis for a flight Mach number of 0.75 shows that it should be possible to achieve natural laminar flow for twice the transition Reynolds number ever achieved at this sweep angle. However, the wing-glove needs to be redesigned to effectively demonstrate passive laminar flow control using DREs. As a by-product of the computational assessment, effect of surface curvature on stationary crossflow disturbances is found to be strongly stabilizing for the current design, and it is suggested that convex surface curvature could be used as a control parameter for natural laminar flow design, provided transition occurs via stationary crossflow disturbances.

[Analysis of optimal plan of multiple acupuncture manipulations for shoulder pain after stroke at different stages].

PubMed

Chen, Dachun; Gao, Jianyu; Chen, Lu; Hao, Zhuanzhuan; Fan, Gangqi

2015-12-01

To observe the effects between acupuncture combined with rehabilitation and simple rehabilitation for shoulder pain after stroke, and to select the best plan of acupuncture manipulations at different stages by orthogonal design. Ninety patients were treated with comprehensive rehabilitation, and nine cases without acupuncture were arranged into a control group. Eighty-one patients of orthogonal design were applied by acupuncture with the same acupoints and course. The VAS score and its weighted value were regarded as the observation indices,and the effects between the acupuncture group and the control group were compared. The optimal plans of acupuncture manipulations of the early stage and the later stage were chosen after the first course treatment and the third course treatment separately. The acupuncture depth (factor A:A: shallow depth less than 25 mm, A(II): modest depth 25-40 mm, A(III): deep depth 40-50 mm), the acupuncture angle (factor B:B(I): perpendicular insertion, B(II): horizontal insertion, B(III): oblique insertion), needle manipulated frequency (factor C: C(I): zero time, C(II): one time, C(III): three times) and needle retained time(factor D:D(I):20 min, D(II): 30 min, D(III): 60 min) were studied. The differences among all factors and the diversity among major factors at different stages were analyzed. (1) Acupuncture combined with rehabilitation at the early and the later stage acquired better improvement than simple rehabilitation (all P < 0.01). (2) The optimal acupuncture manipulation plan at the early stage was A(III) B(III) C(I) D(I), which was deep acupuncture and oblique insertion for 20 min with zero-time manipulation; the optimal acupuncture manipulation plan at the later stage was A(III) B(III) C(III) D(I), which was deep acupuncture and oblique insertion for 20 min with three-time manipulation. (3) There was significance for acupuncture depth and angle at the early stage (both P < 0.01) and there was significance for insertion depth, acupuncture angle and manipulating frequency at the later stage (all P < 0.05). (4) At the early stage, the insertion depth was statistically significant between A(I) and A(II), A(I) and A(III), A(II) and A(III) (P < 0.05, P < 0.01), and the statistical significance was existed between B(I) and B(III) (P < 0.01). At the later stage, the insertion depth was statistically significant between A(I) and A(III), A(III) and A(II), A(I) and A(II) (P < 0.05, P < 0.01), and the statistical significance was existed between C(I) and C(III), C(II) and C(III) (P < 0.05). Acupuncture combined with rehabilitation acquire apparent effect for shoulder pain after stroke. At the early stage,the optimal plan is deep and oblique insertion for 20 min with zero-time manipulation. At the later stage, the best plan is deep and oblique insertion for 20 min with 3-time manipulation.

Genes of the class II and class III major histocompatibility complex are associated with typhoid fever in Vietnam.

PubMed

Dunstan, S J; Stephens, H A; Blackwell, J M; Duc, C M; Lanh, M N; Dudbridge, F; Phuong, C X; Luxemburger, C; Wain, J; Ho, V A; Hien, T T; Farrar, J; Dougan, G

2001-01-15

The influence of genes of the major histocompatibility complex (MHC) class II and class III loci on typhoid fever susceptibility was investigated. Individuals with blood culture-confirmed typhoid fever and control subjects from 2 distinct geographic locations in southern Vietnam were genotyped for HLA-DRB1 and HLA-DQB1 alleles, the gene that encodes tumor necrosis factor (TNF)-alpha (TNFA [-238] and TNFA [-308]), the gene that encodes lymphotoxin-alpha, and alleles of the TNF-alpha microsatellite. HLA-DRB1*0301/6/8, HLA-DQB1*0201-3, and TNFA*2 (-308) were associated with susceptibility to typhoid fever, whereas HLA-DRB1*04, HLA-DQB1*0401/2, and TNFA*1 (-308) were associated with disease resistance. The frequency of all possible haplotypes of the 3 individually associated loci were estimated and were found to be significantly different in typhoid case patients and control subjects (chi2=55.56, 32 df; P=.006). Haplotypes that were either protective (TNFA*1 [-308].DRB1*04) or predisposed individuals to typhoid fever (TNFA*2 [-308].DRB1*0301) were determined. This report identifies a genetic association in humans between typhoid fever and MHC class II and III genes.

Computer-aided axiography of asymptomatic individuals with Class II/2.

PubMed

Stamm, T; Vehring, A; Ehmer, U; Bollmann, F

1998-01-01

The condylar axiographic tracings of 23 asymptomatic adult volunteers (Helkimo-index DiO) with Class II/2 axiography relationships were compared to tracings of an analogous group (DiO; n = 30) with normal occlusion. The obtained measurements were evaluated statistically and discussed with respect to possible recording errors. The open-close movement proceeded uncharacteristically, differences existed only in protrusion, mediotrusion and their combined rotation component. In Class II/2 cases an approximately 7 degrees higher angle of the condylar path inclination (CPI) was measured. The Class II/2 group rotated to a significantly higher angle in protrusive and mediotrusive movements and showed longer condylar path lengths than the control group. Another significant difference was found in the location of maximum CPI values and maximum rotation angles within the condylar path, because in no case was isolated rotation or translation of the hinge axis observed. The temporomandibular joint of Class II/2 individuals shows a wider range of motion than joints of subjects with normal occlusion. The reduced capacity of motion which was assumed to exist in a so-called hack-bite could not be backed up for Class II/2 deep bite cases. The investigated differences cannot be seen as pathomechanisms, because all participants were clinically free of dysfunction. The neuromuscular engram to overcome the overbite controls a complex spatial motion pattern which cannot be described by a simplified mechanical abstraction of motion in the sagittal plane. The temporomandibular joint with its complex pattern of movement is able to create physiological mechanisms of compensation to react to different dental and skeletal features.

SAGE III/ISS L1B Solar Event Transmission Data (HDF-EOS) V5 (g3bt)

Atmospheric Science Data Center

2017-12-21

SAGE III/ISS L1B Solar Event Transmission Data (HDF-EOS) V5 (g3bt)   Project Title:  ... present Temporal Resolution:  1 file per event File Format:  HDF-4 Tools:  Earthdata ... Radiation Longwave Radiation Shortwave Radiation Event Tag Event Type Obs Beta Angle Order Data:  ...

Crystal structures of functional building blocks derived from bis(benzo[b]thiophen-2-yl)methane.

PubMed

Katzsch, Felix; Gruber, Tobias; Weber, Edwin

2016-09-01

The syntheses of three bis(benzo[b]thiophen-2-yl)methane derivatives, namely bis(benzo[b]thiophen-2-yl)methanone, C17H10OS2, (I), 1,1-bis(benzo[b]thiophen-2-yl)-3-(trimethylsilyl)prop-2-yn-1-ol, C22H20OS2Si, (II), and 1,1-bis(benzo[b]thiophen-2-yl)prop-2-yn-1-ol, C19H12OS2, (III), are described and their crystal structures discussed comparatively. The conformation of ketone (I) and the respective analogues are rather similar for most of the compounds compared. This is true for the interplanar angles, the Caryl-Cbridge-Caryl angles and the dihedral angles. The best resemblance is found for a bioisotere of (I), viz. 2,2'-dinaphthyl ketone, (VII). By way of interest, the crystal packings also reveal similarities between (I) and (VII). In (I), the edge-to-face interactions seen between two napthyl residues in (VII) are substituted by S...π contacts between the benzo[b]thiophen-2-yl units in (I). In the structures of the bis(benzo[b]thiophen-2-yl)methanols, i.e. (II) and (III), the interplanar angles are also quite similar compared with analogues and related active pharmaceutical ingredients (APIs) containing the dithiophen-2-ylmethane scaffold, though the dihedral angles show a larger variability and produce unsymmetrical molecules.

Axonal transport of class II and III beta-tubulin: evidence that the slow component wave represents the movement of only a small fraction of the tubulin in mature motor axons

PubMed Central

1992-01-01

Pulse-labeling studies demonstrate that tubulin synthesized in the neuron cell body (soma) moves somatofugally within the axon (at a rate of several millimeters per day) as a well-defined wave corresponding to the slow component of axonal transport. A major goal of the present study was to determine what proportion of the tubulin in mature motor axons is transported in this wave. Lumbar motor neurons in 9-wk-old rats were labeled by injecting [35S]methionine into the spinal cord 2 wk after motor axons were injured (axotomized) by crushing the sciatic nerve. Immunoprecipitation with mAbs which recognize either class II or III beta-tubulin were used to analyze the distributions of radioactivity in these isotypes in intact and axotomized motor fibers 5 d after labeling. We found that both isotypes were associated with the slow component wave, and that the leading edge of this wave was enriched in the class III isotype. Axotomy resulted in significant increases in the labeling and transport rates of both isotypes. Immunohistochemical examination of peripheral nerve fibers demonstrated that nearly all of the class II and III beta-tubulin in nerve fibers is located within axons. Although the amounts of radioactivity per millimeter of nerve in class II and III beta-tubulin were significantly greater in axotomized than in control nerves (with increases of +160% and +58%, respectively), immunoassay revealed no differences in the amounts of these isotypes in axotomized and control motor fibers. We consider several explanations for this paradox; these include the possibility that the total tubulin content is relatively insensitive to changes in the amount of tubulin transported in the slow component wave because this wave represents the movement of only a small fraction of the tubulin in these motor fibers. PMID:1383234

The efficacy of maxillary protraction protocols with the micro-implant-assisted rapid palatal expander (MARPE) and the novel N2 mini-implant-a finite element study.

PubMed

Moon, Won; Wu, Kimberley W; MacGinnis, Matthew; Sung, Jay; Chu, Howard; Youssef, George; Machado, Andre

2015-01-01

Maxillary protraction with the novel N2 mini-implant- and micro-implant-assisted rapid palatal expander (MARPE) can potentially provide significant skeletal effects without surgery, even in older patients where conventional facemask therapy has limited skeletal effects. However, the skeletal effects of altering the location and direction of force from mini-implant-assisted maxillary protraction have not been extensively analyzed. In this study, the application of the novel N2 mini-implant as an orthopedic anchorage device is explored in its ability to treat patients with class III malocclusions. A 3D cranial mesh model with associated sutures was developed from CT images and Mimics modeling software. Utilizing ANSYS simulation software, protraction forces were applied at different locations and directions to simulate conventional facemask therapy and seven maxillary protraction protocols utilizing the novel N2 mini-implant. Stress distribution and displacement were analyzed. Video animations and superimpositions were created. By changing the vector of force and location of N2 mini-implant, the maxilla was displaced differentially. Varying degrees of forward, downward, and rotational movements were observed in each case. For brachyfacial patients, anterior micro-implant-supported protraction at -45° or intermaxillary class III elastics at -45° are recommended. For dolicofacial patients, either anterior micro-implants at -15° or an intermaxillary spring at +30° is recommended. For mesofacial patients with favorable vertical maxillary position, palatal micro-implants at -30° are recommended; anterior micro-implants at -30° are preferred for shallow bites. For patients with a severe mid-facial deficiency, intermaxillary class III elastics at -30° are most effective in promoting anterior growth of the maxilla. By varying the location of N2 mini-implants and vector of class III mechanics, clinicians can differentially alter the magnitude of forward, downward, and rotational movement of the maxilla. As a result, treatment protocol can be customized for each unique class III patient.