Sample records for anova analysis showed

  1. The Peter Effect in Early Experimental Education Research.

    ERIC Educational Resources Information Center

    Little, Joseph

    2003-01-01

    Traces the ways in which educational researchers referred to Ronald A. Fisher's analysis of variance (ANOVA) between 1932 and 1944 in the "Journal of Experimental Education" (JXE). Shows how the changes in citational practices served to separate the ANOVA from its affiliation with Fisher, essentially effacing the memory of its human…

  2. Analysis of Variance in Statistical Image Processing

    NASA Astrophysics Data System (ADS)

    Kurz, Ludwik; Hafed Benteftifa, M.

    1997-04-01

    A key problem in practical image processing is the detection of specific features in a noisy image. Analysis of variance (ANOVA) techniques can be very effective in such situations, and this book gives a detailed account of the use of ANOVA in statistical image processing. The book begins by describing the statistical representation of images in the various ANOVA models. The authors present a number of computationally efficient algorithms and techniques to deal with such problems as line, edge, and object detection, as well as image restoration and enhancement. By describing the basic principles of these techniques, and showing their use in specific situations, the book will facilitate the design of new algorithms for particular applications. It will be of great interest to graduate students and engineers in the field of image processing and pattern recognition.

  3. Analysis of Variance: What Is Your Statistical Software Actually Doing?

    ERIC Educational Resources Information Center

    Li, Jian; Lomax, Richard G.

    2011-01-01

    Users assume statistical software packages produce accurate results. In this article, the authors systematically examined Statistical Package for the Social Sciences (SPSS) and Statistical Analysis System (SAS) for 3 analysis of variance (ANOVA) designs, mixed-effects ANOVA, fixed-effects analysis of covariance (ANCOVA), and nested ANOVA. For each…

  4. Testing Interaction Effects without Discarding Variance.

    ERIC Educational Resources Information Center

    Lopez, Kay A.

    Analysis of variance (ANOVA) and multiple regression are two of the most commonly used methods of data analysis in behavioral science research. Although ANOVA was intended for use with experimental designs, educational researchers have used ANOVA extensively in aptitude-treatment interaction (ATI) research. This practice tends to make researchers…

  5. Multiple comparison analysis testing in ANOVA.

    PubMed

    McHugh, Mary L

    2011-01-01

    The Analysis of Variance (ANOVA) test has long been an important tool for researchers conducting studies on multiple experimental groups and one or more control groups. However, ANOVA cannot provide detailed information on differences among the various study groups, or on complex combinations of study groups. To fully understand group differences in an ANOVA, researchers must conduct tests of the differences between particular pairs of experimental and control groups. Tests conducted on subsets of data tested previously in another analysis are called post hoc tests. A class of post hoc tests that provide this type of detailed information for ANOVA results are called "multiple comparison analysis" tests. The most commonly used multiple comparison analysis statistics include the following tests: Tukey, Newman-Keuls, Scheffee, Bonferroni and Dunnett. These statistical tools each have specific uses, advantages and disadvantages. Some are best used for testing theory while others are useful in generating new theory. Selection of the appropriate post hoc test will provide researchers with the most detailed information while limiting Type 1 errors due to alpha inflation.

  6. Analysis of Variance: Variably Complex

    ERIC Educational Resources Information Center

    Drummond, Gordon B.; Vowler, Sarah L.

    2012-01-01

    These authors have previously described how to use the "t" test to compare two groups. In this article, they describe the use of a different test, analysis of variance (ANOVA) to compare more than two groups. ANOVA is a test of group differences: do at least two of the means differ from each other? ANOVA assumes (1) normal distribution…

  7. Combining ANOVA-PCA with POCHEMON to analyse micro-organism development in a polymicrobial environment.

    PubMed

    Geurts, Brigitte P; Neerincx, Anne H; Bertrand, Samuel; Leemans, Manja A A P; Postma, Geert J; Wolfender, Jean-Luc; Cristescu, Simona M; Buydens, Lutgarde M C; Jansen, Jeroen J

    2017-04-22

    Revealing the biochemistry associated to micro-organismal interspecies interactions is highly relevant for many purposes. Each pathogen has a characteristic metabolic fingerprint that allows identification based on their unique multivariate biochemistry. When pathogen species come into mutual contact, their co-culture will display a chemistry that may be attributed both to mixing of the characteristic chemistries of the mono-cultures and to competition between the pathogens. Therefore, investigating pathogen development in a polymicrobial environment requires dedicated chemometric methods to untangle and focus upon these sources of variation. The multivariate data analysis method Projected Orthogonalised Chemical Encounter Monitoring (POCHEMON) is dedicated to highlight metabolites characteristic for the interaction of two micro-organisms in co-culture. However, this approach is currently limited to a single time-point, while development of polymicrobial interactions may be highly dynamic. A well-known multivariate implementation of Analysis of Variance (ANOVA) uses Principal Component Analysis (ANOVA-PCA). This allows the overall dynamics to be separated from the pathogen-specific chemistry to analyse the contributions of both aspects separately. For this reason, we propose to integrate ANOVA-PCA with the POCHEMON approach to disentangle the pathogen dynamics and the specific biochemistry in interspecies interactions. Two complementary case studies show great potential for both liquid and gas chromatography - mass spectrometry to reveal novel information on chemistry specific to interspecies interaction during pathogen development. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

  8. Teaching Principles of Inference with ANOVA

    ERIC Educational Resources Information Center

    Tarlow, Kevin R.

    2016-01-01

    Analysis of variance (ANOVA) is a test of "mean" differences, but the reference to "variances" in the name is often overlooked. Classroom activities are presented to illustrate how ANOVA works with emphasis on how to think critically about inferential reasoning.

  9. 40 CFR 264.97 - General ground-water monitoring requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... paragraph (i) of this section. (1) A parametric analysis of variance (ANOVA) followed by multiple... mean levels for each constituent. (2) An analysis of variance (ANOVA) based on ranks followed by...

  10. Analysis of Variance in the Modern Design of Experiments

    NASA Technical Reports Server (NTRS)

    Deloach, Richard

    2010-01-01

    This paper is a tutorial introduction to the analysis of variance (ANOVA), intended as a reference for aerospace researchers who are being introduced to the analytical methods of the Modern Design of Experiments (MDOE), or who may have other opportunities to apply this method. One-way and two-way fixed-effects ANOVA, as well as random effects ANOVA, are illustrated in practical terms that will be familiar to most practicing aerospace researchers.

  11. Cytocompatibility, cytotoxicity and genotoxicity analysis of dental implants

    NASA Astrophysics Data System (ADS)

    Reigosa, M.; Labarta, V.; Molinari, G.; Bernales, D.

    2007-11-01

    Several types of materials are frequently used for dental prostheses in dental medicine. Different treatments with titanium are the most used. The aim of the present study was to analyze by means of cytotoxicity and cytocompatibility techniques the capacity of dental implants to integrate to the bone tissue. Cultures of UMR 106 cell line derived from an osteosarcoma were used for bioassays mainly because they show many of the properties of osteoblasts. Dental implant samples provided by B&W company were compared with others of recognized trademarks. The first ones contain ASTM titanium (8348 GR2) with acid printing. Cytotoxicity was analyzed by means of lysosome activity, using the neutral red technique and alkaline phosphatase enzyme activity. Cell variability was determined by means of the acridine ethidium-orange bromide technique. One-way ANOVA and Bonferroni and Duncan post-ANOVA tests were used for the statistical analysis. The assays did not show significant differences among the dental implants analyzed. Our findings show that the dental prostheses studied present high biocompatibility, quantified by the bioassays performed. The techniques employed revealed that they can be a useful tool for the analysis of other materials for dental medicine use.

  12. Inhibition of Orthopaedic Implant Infections by Immunomodulatory Effects of Host Defense Peptides

    DTIC Science & Technology

    2014-12-01

    significance was determined by t- tests or by one-way analysis of variance (ANOVA) followed by Bonferroni post hoc tests in experiments with multiple...groups. Non- parametric Mann-Whitney tests , Kruskal-Wallis ANOVA followed by Newman-Kuels post hoc tests , or van Elteren’s two-way tests were applied to...in D, and black symbols in A), statistical analysis was by one-way ANOVA followed by Bonferroni versus control, post hoc tests . Otherwise, statistical

  13. Nutritional status, fertility and factors associated with anaemia: a cross sectional study among a rural population of Muslim women in Assam, India.

    PubMed

    Haloi, Anjali; Limbu, Dhruba Kumar

    2013-01-01

    In the present study an attempt has been made to report on the nutritional status of the Assamese Muslim women of Dadara and Agyathuri villages of the Kamrup district in Assam, India on their basis of body mass index (BMI) and haemoglobin (hb) content. Cross sectional data on 1034 women belonging to the age group of 19 years and above were collected following internationally accepted standards. The fertility of mothers by BMI range was found to be highest (6.50 (mean) +/- 0.14 (SE) and range being 1-11) amongst underweight mothers. The one-way analysis of variance (ANOVA) test of BMI and fertility shows significant relation between different BMI groups withp < 0.01. Highest haemoglobin levels were recorded in the age group of < or = 23 years with a mean of 11.61 +/- 0.06 g/dl, the range being 9.8-13.9 g/dl. Whereas lowest levels of haemoglobin were found in the age groups of 44+ years having a mean value of 10.26 +/- 0.04 g/dl and a range of 9.2-11.8 g/dl. The ANOVA analysis for haemoglobin content and corresponding fertility rates show significant difference between different hemoglobin levels with their live births at p < 0.01. The summary of ANOVA analysis for haemoglobin and BMI range shows the significant difference between groups i.e., normal, overweight and underweight. The t-value and F-ratio is 118.61 and 14068.42, respectively, which is significant at 1% probability. The authors conclude a general trend in the study population of women with high fertility having poor nutritional status. These findings might be important in formulating responsive health policies in an underdeveloped region.

  14. On statistical analysis of factors affecting anthocyanin extraction from Ixora siamensis

    NASA Astrophysics Data System (ADS)

    Mat Nor, N. A.; Arof, A. K.

    2016-10-01

    This study focused on designing an experimental model in order to evaluate the influence of operative extraction parameters employed for anthocyanin extraction from Ixora siamensis on CIE color measurements (a*, b* and color saturation). Extractions were conducted at temperatures of 30, 55 and 80°C, soaking time of 60, 120 and 180 min using acidified methanol solvent with different trifluoroacetic acid (TFA) contents of 0.5, 1.75 and 3% (v/v). The statistical evaluation was performed by running analysis of variance (ANOVA) and regression calculation to investigate the significance of the generated model. Results show that the generated regression models adequately explain the data variation and significantly represented the actual relationship between the independent variables and the responses. Analysis of variance (ANOVA) showed high coefficient determination values (R2) of 0.9687 for a*, 0.9621 for b* and 0.9758 for color saturation, thus ensuring a satisfactory fit of the developed models with the experimental data. Interaction between TFA content and extraction temperature exhibited to the highest significant influence on CIE color parameter.

  15. Goals and potential career advancement of licensed practical nurses in Japan.

    PubMed

    Ikeda, Mari; Inoue, Katsuya; Kamibeppu, Kiyoko

    2008-10-01

    To investigate the effects of personal and professional variables on career advancement intentions of working Licensed Practical Nurses (LPNs). In Japan, two levels of professional nursing licensures, the LPN and the registered nurse (RN), are likely to be integrated in the future. Therefore, it is important to know the career advancement intentions of LPNs. Questionnaires were sent to a sample of 356 LPNs. Analysis of variance (anova) and discriminative analysis were used. We found that those who had a positive image of LPNs along with a positive image of RNs were identified as showing interest in career advancement. The results of anova showed that age had a negative effect; however, discriminative analysis suggested that age is not as significant compared with other variables. Our results indicate that the 'image of RNs', and 'role-acceptance factors' have an effect on career advancement intentions of LPNs. Our results suggest that Nursing Managers should create a supportive working environment where the LPN would feel encouraged to carry out the nursing role, thereby creating a positive image of nursing in general which would lead to career motivation and pursuing RN status.

  16. WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

    PubMed

    Grech, Victor

    2018-06-01

    Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Visual analysis of variance: a tool for quantitative assessment of fMRI data processing and analysis.

    PubMed

    McNamee, R L; Eddy, W F

    2001-12-01

    Analysis of variance (ANOVA) is widely used for the study of experimental data. Here, the reach of this tool is extended to cover the preprocessing of functional magnetic resonance imaging (fMRI) data. This technique, termed visual ANOVA (VANOVA), provides both numerical and pictorial information to aid the user in understanding the effects of various parts of the data analysis. Unlike a formal ANOVA, this method does not depend on the mathematics of orthogonal projections or strictly additive decompositions. An illustrative example is presented and the application of the method to a large number of fMRI experiments is discussed. Copyright 2001 Wiley-Liss, Inc.

  18. Tools for Basic Statistical Analysis

    NASA Technical Reports Server (NTRS)

    Luz, Paul L.

    2005-01-01

    Statistical Analysis Toolset is a collection of eight Microsoft Excel spreadsheet programs, each of which performs calculations pertaining to an aspect of statistical analysis. These programs present input and output data in user-friendly, menu-driven formats, with automatic execution. The following types of calculations are performed: Descriptive statistics are computed for a set of data x(i) (i = 1, 2, 3 . . . ) entered by the user. Normal Distribution Estimates will calculate the statistical value that corresponds to cumulative probability values, given a sample mean and standard deviation of the normal distribution. Normal Distribution from two Data Points will extend and generate a cumulative normal distribution for the user, given two data points and their associated probability values. Two programs perform two-way analysis of variance (ANOVA) with no replication or generalized ANOVA for two factors with four levels and three repetitions. Linear Regression-ANOVA will curvefit data to the linear equation y=f(x) and will do an ANOVA to check its significance.

  19. SMAR Sessions

    NASA Technical Reports Server (NTRS)

    Ploutz-Snyder, Robert

    2011-01-01

    This slide presentation is a series of educational presentations that are on the statistical function of analysis of variance (ANOVA). Analysis of Variance (ANOVA) examines variability between groups, relative to within groups, to determine whether there's evidence that the groups are not from the same population. One other presentation reviews hypothesis testing.

  20. Formative Use of Intuitive Analysis of Variance

    ERIC Educational Resources Information Center

    Trumpower, David L.

    2013-01-01

    Students' informal inferential reasoning (IIR) is often inconsistent with the normative logic underlying formal statistical methods such as Analysis of Variance (ANOVA), even after instruction. In two experiments reported here, student's IIR was assessed using an intuitive ANOVA task at the beginning and end of a statistics course. In both…

  1. Robustness of S1 statistic with Hodges-Lehmann for skewed distributions

    NASA Astrophysics Data System (ADS)

    Ahad, Nor Aishah; Yahaya, Sharipah Soaad Syed; Yin, Lee Ping

    2016-10-01

    Analysis of variance (ANOVA) is a common use parametric method to test the differences in means for more than two groups when the populations are normally distributed. ANOVA is highly inefficient under the influence of non- normal and heteroscedastic settings. When the assumptions are violated, researchers are looking for alternative such as Kruskal-Wallis under nonparametric or robust method. This study focused on flexible method, S1 statistic for comparing groups using median as the location estimator. S1 statistic was modified by substituting the median with Hodges-Lehmann and the default scale estimator with the variance of Hodges-Lehmann and MADn to produce two different test statistics for comparing groups. Bootstrap method was used for testing the hypotheses since the sampling distributions of these modified S1 statistics are unknown. The performance of the proposed statistic in terms of Type I error was measured and compared against the original S1 statistic, ANOVA and Kruskal-Wallis. The propose procedures show improvement compared to the original statistic especially under extremely skewed distribution.

  2. A LISREL Model for the Analysis of Repeated Measures with a Patterned Covariance Matrix.

    ERIC Educational Resources Information Center

    Rovine, Michael J.; Molenaar, Peter C. M.

    1998-01-01

    Presents a LISREL model for the estimation of the repeated measures analysis of variance (ANOVA) with a patterned covariance matrix. The model is demonstrated for a 5 x 2 (Time x Group) ANOVA in which the data are assumed to be serially correlated. Similarities with the Statistical Analysis System PROC MIXED model are discussed. (SLD)

  3. Multiple Regression as a Flexible Alternative to ANOVA in L2 Research

    ERIC Educational Resources Information Center

    Plonsky, Luke; Oswald, Frederick L.

    2017-01-01

    Second language (L2) research relies heavily and increasingly on ANOVA (analysis of variance)-based results as a means to advance theory and practice. This fact alone should merit some reflection on the utility and value of ANOVA. It is possible that we could use this procedure more appropriately and, as argued here, other analyses such as…

  4. Coding and Commonality Analysis: Non-ANOVA Methods for Analyzing Data from Experiments.

    ERIC Educational Resources Information Center

    Thompson, Bruce

    The advantages and disadvantages of three analytic methods used to analyze experimental data in educational research are discussed. The same hypothetical data set is used with all methods for a direct comparison. The Analysis of Variance (ANOVA) method and its several analogs are collectively labeled OVA methods and are evaluated. Regression…

  5. A Demonstration of the Analysis of Variance Using Physical Movement and Space

    ERIC Educational Resources Information Center

    Owen, William J.; Siakaluk, Paul D.

    2011-01-01

    Classroom demonstrations help students better understand challenging concepts. This article introduces an activity that demonstrates the basic concepts involved in analysis of variance (ANOVA). Students who physically participated in the activity had a better understanding of ANOVA concepts (i.e., higher scores on an exam question answered 2…

  6. [Procedural learning and anxiolytic effects: electroencephalographic, motor and attentional measures].

    PubMed

    Portella, Claudio Elidio; Silva, Julio Guilherme; Bastos, Victor Hugo; Machado, Dionis; Cunha, Marlo; Cagy, Maurício; Basile, Luis; Piedade, Roberto; Ribeiro, Pedro

    2006-06-01

    The objective of the present study was to evaluate attentional, motor and electroencephalographic (EEG) parameters during a procedural task when subjects have ingested 6 mg of bromazepam. The sample consisted of 26 healthy subjects, male or female, between 19 and 36 years of age. The control (placebo) and experimental (bromazepam 6 mg) groups were submitted to a typewriting task in a randomized, double-blind design. The findings did not show significant differences in attentional and motor measures between groups. Coherence measures (qEEG) were evaluated between scalp regions, in theta, alpha and beta bands. A first analysis revealed a main effect for condition (Anova 2-way--condition versus blocks). A second Anova 2-way (condition versus scalp regions) showed a main effect for both factors. The coherence measure was not a sensitive tool at demonstrating differences between cortical areas as a function of procedural learning.

  7. Reaction times of moderate and severe stutterers to monaural verbal stimuli: some implications for neurolinguistic organization.

    PubMed

    Rastatter, M P; Dell, C W

    1987-03-01

    Fourteen right-handed stutterers and 14 normal speakers (7 men & 7 women) responded to monaurally presented stimuli with their right and left hands. Results of an ANOVA with repeated measures showed that a significant ear-hand interaction existed in the normal subjects' data, with the right-ear, right-hand configuration producing the fastest responses. These findings were in concert with an efficiency model of neurolinguistic organization that suggests that the left hemisphere is dominant for language processing with the right hemisphere being capable of performing less efficient auditory-verbal analysis. Results of a similar ANOVA procedure showed that all main effects and interactions were nonsignificant for the stutterers. From these data a bilateral model of neurolinguistic organization was derived for the stutterers where both hemispheres must participate simultaneously in the decoding process. This held true regardless of sex or severity of stuttering.

  8. Detection of burst suppression patterns in EEG using recurrence rate.

    PubMed

    Liang, Zhenhu; Wang, Yinghua; Ren, Yongshao; Li, Duan; Voss, Logan; Sleigh, Jamie; Li, Xiaoli

    2014-01-01

    Burst suppression is a unique electroencephalogram (EEG) pattern commonly seen in cases of severely reduced brain activity such as overdose of general anesthesia. It is important to detect burst suppression reliably during the administration of anesthetic or sedative agents, especially for cerebral-protective treatments in various neurosurgical diseases. This study investigates recurrent plot (RP) analysis for the detection of the burst suppression pattern (BSP) in EEG. The RP analysis is applied to EEG data containing BSPs collected from 14 patients. Firstly we obtain the best selection of parameters for RP analysis. Then, the recurrence rate (RR), determinism (DET), and entropy (ENTR) are calculated. Then RR was selected as the best BSP index one-way analysis of variance (ANOVA) and multiple comparison tests. Finally, the performance of RR analysis is compared with spectral analysis, bispectral analysis, approximate entropy, and the nonlinear energy operator (NLEO). ANOVA and multiple comparison tests showed that the RR could detect BSP and that it was superior to other measures with the highest sensitivity of suppression detection (96.49%, P = 0.03). Tracking BSP patterns is essential for clinical monitoring in critically ill and anesthetized patients. The purposed RR may provide an effective burst suppression detector for developing new patient monitoring systems.

  9. An investigation of thermal changes of various permanent dental cements.

    PubMed

    Duymus, Zeynep Yesil; Yilmaz, Baykal; Karaalioglu, F Osman

    2009-05-01

    The aim of this study was to investigate and compare the temperature rises which occurred during the setting reactions of different permanent cements used to lute fixed partial prosthodontics. In this study, four cements were used. They were mixed in three different proportions: according to manufacturers' recommendations, at doubled powder ratio, and at doubled liquid ratio. With a thermocouple, the temperature rises which occurred during the setting reactions were measured. For each proportion, the measurement was repeated five times such that a total of 60 measurements were done for the four different cements. Data were analyzed using analysis of variance (ANOVA). ANOVA results showed that cement type and the interaction between cement type and the powder-liquid ratio were statistically significant factors (p<0.001). Similarly, the powder-liquid ratio was a statistically significant (p<0.01) factor. Among the dental cements tested, zinc phosphate cement showed the highest temperature rise during setting reaction, whereas glass ionomer cement showed the lowest.

  10. Teaching Principles of One-Way Analysis of Variance Using M&M's Candy

    ERIC Educational Resources Information Center

    Schwartz, Todd A.

    2013-01-01

    I present an active learning classroom exercise illustrating essential principles of one-way analysis of variance (ANOVA) methods. The exercise is easily conducted by the instructor and is instructive (as well as enjoyable) for the students. This is conducive for demonstrating many theoretical and practical issues related to ANOVA and lends itself…

  11. Effect of Dentin Wetness on the Bond Strength of Universal Adhesives.

    PubMed

    Choi, An-Na; Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon; Park, Jeong-Kil

    2017-10-25

    The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey's post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed ( p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives.

  12. Effect of Dentin Wetness on the Bond Strength of Universal Adhesives

    PubMed Central

    Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon

    2017-01-01

    The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey’s post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed (p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives. PMID:29068404

  13. The use of analysis of variance procedures in biological studies

    USGS Publications Warehouse

    Williams, B.K.

    1987-01-01

    The analysis of variance (ANOVA) is widely used in biological studies, yet there remains considerable confusion among researchers about the interpretation of hypotheses being tested. Ambiguities arise when statistical designs are unbalanced, and in particular when not all combinations of design factors are represented in the data. This paper clarifies the relationship among hypothesis testing, statistical modelling and computing procedures in ANOVA for unbalanced data. A simple two-factor fixed effects design is used to illustrate three common parametrizations for ANOVA models, and some associations among these parametrizations are developed. Biologically meaningful hypotheses for main effects and interactions are given in terms of each parametrization, and procedures for testing the hypotheses are described. The standard statistical computing procedures in ANOVA are given along with their corresponding hypotheses. Throughout the development unbalanced designs are assumed and attention is given to problems that arise with missing cells.

  14. A Didactic Experience of Statistical Analysis for the Determination of Glycine in a Nonaqueous Medium Using ANOVA and a Computer Program

    ERIC Educational Resources Information Center

    Santos-Delgado, M. J.; Larrea-Tarruella, L.

    2004-01-01

    The back-titration methods are compared statistically to establish glycine in a nonaqueous medium of acetic acid. Important variations in the mean values of glycine are observed due to the interaction effects between the analysis of variance (ANOVA) technique and a statistical study through a computer software.

  15. Unequal Cell Frequencies in Analysis of Variance: A Review and Extension of Methodology for Multiple Missing Observations.

    ERIC Educational Resources Information Center

    Proger, Barton B.; And Others

    Many researchers assume that unequal cell frequencies in analysis of variance (ANOVA) designs result from poor planning. However, there are several valid reasons why one might have to analyze an unequal-n data matrix. The present study reviewed four categories of methods for treating unequal-n matrices by ANOVA: (a) unaltered data (least-squares…

  16. Effect of spatial resolution on remote sensing estimation of total evaporation in the uMngeni catchment, South Africa

    NASA Astrophysics Data System (ADS)

    Shoko, Cletah; Clark, David; Mengistu, Michael; Dube, Timothy; Bulcock, Hartley

    2015-01-01

    This study evaluated the effect of two readily available multispectral sensors: the newly launched 30 m spatial resolution Landsat 8 and the long-serving 1000 m moderate resolution imaging spectroradiometer (MODIS) datasets in the spatial representation of total evaporation in the heterogeneous uMngeni catchment, South Africa, using the surface energy balance system model. The results showed that sensor spatial resolution plays a critical role in the accurate estimation of energy fluxes and total evaporation across a heterogeneous catchment. Landsat 8 estimates showed better spatial representation of the biophysical parameters and total evaporation for different land cover types, due to the relatively higher spatial resolution compared to the coarse spatial resolution MODIS sensor. Moreover, MODIS failed to capture the spatial variations of total evaporation estimates across the catchment. Analysis of variance (ANOVA) results showed that MODIS-based total evaporation estimates did not show any significant differences across different land cover types (one-way ANOVA; F1.924=1.412, p=0.186). However, Landsat 8 images yielded significantly different estimates between different land cover types (one-way ANOVA; F1.993=5.185, p<0.001). The validation results showed that Landsat 8 estimates were more comparable to eddy covariance (EC) measurements than the MODIS-based total evaporation estimates. EC measurement on May 23, 2013, was 3.8 mm/day, whereas the Landsat 8 estimate on the same day was 3.6 mm/day, with MODIS showing significantly lower estimates of 2.3 mm/day. The findings of this study underscore the importance of spatial resolution in estimating spatial variations of total evaporation at the catchment scale, thus, they provide critical information on the relevance of the readily available remote sensing products in water resources management in data-scarce environments.

  17. A Comparison of implant impression precision: Different materials and techniques

    PubMed Central

    Tabesh, Mahtab; Alikhasi, Marzieh

    2018-01-01

    Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (P<0.001), PVS and VSE (P<0.001) in indirect technique. One-way ANOVA and t-test showed significant difference between the two techniques in PVS groups (P<0.001) and in PE groups (P=0.02). Two-way ANOVA showed mean values of rotational displacement of implants were significantly different among materials. One-way ANOVA and Tukey test showed significant difference between PVS and PE (P=0.001) and between PVS and VSE (P=0.012) in indirect groups. Conclusions On the basis of the results, when deciding on the material to make an impression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

  18. Syllabic patterns in typical and atypical phonological development: ultrasonographic analysis.

    PubMed

    Vassoler, Aline Mara de Oliveira; Berti, Larissa Cristina

    2018-01-01

    Objective The present study aims to compare the production of syllabic patterns of the CVC and CV types performed by Brazilian children with typical and atypical phonological development through ultrasonography of tongue. Methods Ten children (five with typical and with five atypical phonological development) recorded nine pairs of words from the syllables: CCV and CV. The images and audios were captured simultaneously by the Articulate Assistant Advanced software. The data were submitted to perceptive analysis and ultrasonographic articulatory analysis (the area between the tip and the blade of the tongue). The area measurements were submitted to one-way repeated measures ANOVA. Results ANOVA demonstrated a significant effect for the clinical condition (typical and atypical), (F (1.8) = 172.48, p> 0.000) forthe area measurements. In both syllabic patterns (CCV and CV) the atypical children showed greater values ​​of the area between the tip and the blade of the tongue. Regarding the syllabic patterns analyzed, the statistical test showed no significant effect (F (1.8)=0.19, p>0.658). Conclusion The use of a greater area of ​​the tongue by children with atypical phonological development suggests the non-differentiation of the tip and the anterior body gestures of the tongue in the production of CV and CCV.

  19. Morphometric analysis of root canal cleaning after rotary instrumentation with or without laser irradiation

    NASA Astrophysics Data System (ADS)

    Marchesan, Melissa A.; Geurisoli, Danilo M. Z.; Brugnera, Aldo, Jr.; Barbin, Eduardo L.; Pecora, Jesus D.

    2002-06-01

    The present study examined root canal cleaning, using the optic microscope, after rotary instrumentation with ProFile.04 with or without laser application with different output energies. Cleaning and shaping can be accomplished manually, with ultra-sonic and sub-sonic devices, with rotary instruments and recently, increasing development in laser radiation has shown promising results for disinfection and smear layer removal. In this study, 30 palatal maxillary molar roots were examined using an optic microscope after rotary instrumentation with ProFile .04 with or without Er:YAG laser application (KaVo KeyLaser II, Germany) with different output energies (2940 nm, 15 Hz, 300 pulses, 500 milli-sec duration, 42 J, 140 mJ showed on the display- input, 61 mJ at fiberoptic tip-output and 140 mJ showed on the display-input and 51 mJ at fiberoptic tip-output). Statistical analysis showed no statistical differences between the tested treatments (ANOVA, p>0.05). ANOVA also showed a statistically significant difference (p<0.01) between the root canal thirds, indicating that the middle third had less debris than the apical third. We conclude that: 1) none of the tested treatments led to totally cleaned root canals; 2) all treatments removed debris similarly, 3) the middle third had less debris than the apical third; 4) variation in output energy did not increase cleaning.

  20. LED Curing Lights and Temperature Changes in Different Tooth Sites

    PubMed Central

    Armellin, E.; Bovesecchi, G.; Coppa, P.; Pasquantonio, G.; Cerroni, L.

    2016-01-01

    Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ 2. After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure. PMID:27195282

  1. The effectivenes of science domain-based science learning integrated with local potency

    NASA Astrophysics Data System (ADS)

    Kurniawati, Arifah Putri; Prasetyo, Zuhdan Kun; Wilujeng, Insih; Suryadarma, I. Gusti Putu

    2017-08-01

    This research aimed to determine the significant effect of science domain-based science learning integrated with local potency toward science process skills. The research method used was a quasi-experimental design with nonequivalent control group design. The population of this research was all students of class VII SMP Negeri 1 Muntilan. The sample of this research was selected through cluster random sampling, namely class VII B as an experiment class (24 students) and class VII C as a control class (24 students). This research used a test instrument that was adapted from Agus Dwianto's research. The aspect of science process skills in this research was observation, classification, interpretation and communication. The analysis of data used the one factor anova at 0,05 significance level and normalized gain score. The significance level result of science process skills with one factor anova is 0,000. It shows that the significance level < alpha (0,05). It means that there was significant effect of science domain-based science learning integrated with local potency toward science learning process skills. The results of analysis show that the normalized gain score are 0,29 (low category) in control class and 0,67 (medium category) in experiment class.

  2. LED Curing Lights and Temperature Changes in Different Tooth Sites.

    PubMed

    Armellin, E; Bovesecchi, G; Coppa, P; Pasquantonio, G; Cerroni, L

    2016-01-01

    Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ (2). After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure.

  3. Rapid development of xylanase assay conditions using Taguchi methodology.

    PubMed

    Prasad Uday, Uma Shankar; Bandyopadhyay, Tarun Kanti; Bhunia, Biswanath

    2016-11-01

    The present investigation is mainly concerned with the rapid development of extracellular xylanase assay conditions by using Taguchi methodology. The extracellular xylanase was produced from Aspergillus niger (KP874102.1), a new strain isolated from a soil sample of the Baramura forest, Tripura West, India. Four physical parameters including temperature, pH, buffer concentration and incubation time were considered as key factors for xylanase activity and were optimized using Taguchi robust design methodology for enhanced xylanase activity. The main effect, interaction effects and optimal levels of the process factors were determined using signal-to-noise (S/N) ratio. The Taguchi method recommends the use of S/N ratio to measure quality characteristics. Based on analysis of the S/N ratio, optimal levels of the process factors were determined. Analysis of variance (ANOVA) was performed to evaluate statistically significant process factors. ANOVA results showed that temperature contributed the maximum impact (62.58%) on xylanase activity, followed by pH (22.69%), buffer concentration (9.55%) and incubation time (5.16%). Predicted results showed that enhanced xylanase activity (81.47%) can be achieved with pH 2, temperature 50°C, buffer concentration 50 Mm and incubation time 10 min.

  4. Wheat crown rot pathogens Fusarium graminearum and F. pseudograminearum lack specialization.

    PubMed

    Chakraborty, Sukumar; Obanor, Friday; Westecott, Rhyannyn; Abeywickrama, Krishanthi

    2010-10-01

    This article reports a lack of pathogenic specialization among Australian Fusarium graminearum and F. pseudograminearum causing crown rot (CR) of wheat using analysis of variance (ANOVA), principal component and biplot analysis, Kendall's coefficient of concordance (W), and κ statistics. Overall, F. pseudograminearum was more aggressive than F. graminearum, supporting earlier delineation of the crown-infecting group as a new species. Although significant wheat line-pathogen isolate interaction in ANOVA suggested putative specialization when seedlings of 60 wheat lines were inoculated with 4 pathogen isolates or 26 wheat lines were inoculated with 10 isolates, significant W and κ showed agreement in rank order of wheat lines, indicating a lack of specialization. The first principal component representing nondifferential aggressiveness explained a large part (up to 65%) of the variation in CR severity. The differential components were small and more pronounced in seedlings than in adult plants. By maximizing variance on the first two principal components, biplots were useful for highlighting the association between isolates and wheat lines. A key finding of this work is that a range of analytical tools are needed to explore pathogenic specialization, and a statistically significant interaction in an ANOVA cannot be taken as conclusive evidence of specialization. With no highly resistant wheat cultivars, Fusarium isolates mostly differ in aggressiveness; however, specialization may appear as more resistant cultivars become widespread.

  5. An ANOVA approach for statistical comparisons of brain networks.

    PubMed

    Fraiman, Daniel; Fraiman, Ricardo

    2018-03-16

    The study of brain networks has developed extensively over the last couple of decades. By contrast, techniques for the statistical analysis of these networks are less developed. In this paper, we focus on the statistical comparison of brain networks in a nonparametric framework and discuss the associated detection and identification problems. We tested network differences between groups with an analysis of variance (ANOVA) test we developed specifically for networks. We also propose and analyse the behaviour of a new statistical procedure designed to identify different subnetworks. As an example, we show the application of this tool in resting-state fMRI data obtained from the Human Connectome Project. We identify, among other variables, that the amount of sleep the days before the scan is a relevant variable that must be controlled. Finally, we discuss the potential bias in neuroimaging findings that is generated by some behavioural and brain structure variables. Our method can also be applied to other kind of networks such as protein interaction networks, gene networks or social networks.

  6. An experiment with spectral analysis of emotional speech affected by orthodontic appliances

    NASA Astrophysics Data System (ADS)

    Přibil, Jiří; Přibilová, Anna; Ďuračková, Daniela

    2012-11-01

    The contribution describes the effect of the fixed and removable orthodontic appliances on spectral properties of emotional speech. Spectral changes were analyzed and evaluated by spectrograms and mean Welch’s periodograms. This alternative approach to the standard listening test enables to obtain objective comparison based on statistical analysis by ANOVA and hypothesis tests. Obtained results of analysis performed on short sentences of a female speaker in four emotional states (joyous, sad, angry, and neutral) show that, first of all, the removable orthodontic appliance affects the spectrograms of produced speech.

  7. Laser and plasma dental soldering techniques applied to Ti-6Al-4V alloy: ultimate tensile strength and finite element analysis.

    PubMed

    Castro, Morgana G; Araújo, Cleudmar A; Menegaz, Gabriela L; Silva, João Paulo L; Nóbilo, Mauro Antônio A; Simamoto Júnior, Paulo Cézar

    2015-05-01

    The literature provides limited information regarding the performance of Ti-6Al-4V laser and plasma joints welded in prefabricated bars in dental applications. The purpose of this study was to evaluate the mechanical strength of different diameters of Ti-6Al-4V alloy welded with laser and plasma techniques. Forty-five dumbbell-shaped rods were created from Ti-6Al-4V and divided into 9 groups (n=5): a control group with 3-mm and intact bars; groups PL2.5, PL3, PL4, and PL5 (specimens with 2.5-, 3-, 4-, and 5-mm diameters welded with plasma); and groups L2.5, L3, L4, and L5 (specimens with 2.5-, 3-, 4-, and 5-mm diameters welded with laser). The specimens were tested for ultimate tensile strength (UTS), and elongation percentages (EP) were obtained. Fractured specimens were analyzed by stereomicroscopy, and welded area percentages (WAP) were calculated. Images were made with scanning electron microscopy. In the initial analysis, the data were analyzed with a 2-way ANOVA (2×4) and the Tukey Honestly Significant Difference (HSD) test. In the second analysis, the UTS and EP data were analyzed with 1-way ANOVA, and the Dunnett test was used to compare the 4 experimental groups with the control group (α=.05). The Pearson and Spearman correlation coefficient tests were applied to correlate the study factors. Finite element models were developed in a workbench environment with boundary conditions simulating those of a tensile test. The 2-way ANOVA showed that the factors welding type and diameter were significant for the UTS and WAP values. However, the interaction between them was not significant. The 1-way ANOVA showed statistically significant differences among the groups for UTS, WAP, and EP values. The Dunnett test showed that all the tested groups had lower UTS and EP values than the control group. The 2.5- and 3-mm diameter groups showed higher values for UTS and WAP than the other test groups. A positive correlation was found between welded area percentage and UTS and a negative correlation between these parameters and the diameters of the specimens. No statistically significant difference was found between the weld techniques. Under the experimental conditions described, diameters of 2.5 and 3 mm resulted in higher UTS and WAP for both laser and plasma welding and appear to be the best option for joining prefabricated rods in this kind of union. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  8. Bias, precision and statistical power of analysis of covariance in the analysis of randomized trials with baseline imbalance: a simulation study.

    PubMed

    Egbewale, Bolaji E; Lewis, Martyn; Sim, Julius

    2014-04-09

    Analysis of variance (ANOVA), change-score analysis (CSA) and analysis of covariance (ANCOVA) respond differently to baseline imbalance in randomized controlled trials. However, no empirical studies appear to have quantified the differential bias and precision of estimates derived from these methods of analysis, and their relative statistical power, in relation to combinations of levels of key trial characteristics. This simulation study therefore examined the relative bias, precision and statistical power of these three analyses using simulated trial data. 126 hypothetical trial scenarios were evaluated (126,000 datasets), each with continuous data simulated by using a combination of levels of: treatment effect; pretest-posttest correlation; direction and magnitude of baseline imbalance. The bias, precision and power of each method of analysis were calculated for each scenario. Compared to the unbiased estimates produced by ANCOVA, both ANOVA and CSA are subject to bias, in relation to pretest-posttest correlation and the direction of baseline imbalance. Additionally, ANOVA and CSA are less precise than ANCOVA, especially when pretest-posttest correlation ≥ 0.3. When groups are balanced at baseline, ANCOVA is at least as powerful as the other analyses. Apparently greater power of ANOVA and CSA at certain imbalances is achieved in respect of a biased treatment effect. Across a range of correlations between pre- and post-treatment scores and at varying levels and direction of baseline imbalance, ANCOVA remains the optimum statistical method for the analysis of continuous outcomes in RCTs, in terms of bias, precision and statistical power.

  9. Bias, precision and statistical power of analysis of covariance in the analysis of randomized trials with baseline imbalance: a simulation study

    PubMed Central

    2014-01-01

    Background Analysis of variance (ANOVA), change-score analysis (CSA) and analysis of covariance (ANCOVA) respond differently to baseline imbalance in randomized controlled trials. However, no empirical studies appear to have quantified the differential bias and precision of estimates derived from these methods of analysis, and their relative statistical power, in relation to combinations of levels of key trial characteristics. This simulation study therefore examined the relative bias, precision and statistical power of these three analyses using simulated trial data. Methods 126 hypothetical trial scenarios were evaluated (126 000 datasets), each with continuous data simulated by using a combination of levels of: treatment effect; pretest-posttest correlation; direction and magnitude of baseline imbalance. The bias, precision and power of each method of analysis were calculated for each scenario. Results Compared to the unbiased estimates produced by ANCOVA, both ANOVA and CSA are subject to bias, in relation to pretest-posttest correlation and the direction of baseline imbalance. Additionally, ANOVA and CSA are less precise than ANCOVA, especially when pretest-posttest correlation ≥ 0.3. When groups are balanced at baseline, ANCOVA is at least as powerful as the other analyses. Apparently greater power of ANOVA and CSA at certain imbalances is achieved in respect of a biased treatment effect. Conclusions Across a range of correlations between pre- and post-treatment scores and at varying levels and direction of baseline imbalance, ANCOVA remains the optimum statistical method for the analysis of continuous outcomes in RCTs, in terms of bias, precision and statistical power. PMID:24712304

  10. Influence of training and competitive sessions on peripheral β-endorphin levels in training show jumping horses.

    PubMed

    Cravana, Cristina; Medica, P; Ragonese, G; Fazio, E

    2017-01-01

    To investigate the effects of training sessions on circulating β-endorphin changes in sport horses before and after competition and to ascertain whether competition would affect this response. A total of 24 trained jumping horses were randomly assigned to one of two training groups: Group A (competing) and Group B (not competing). To determined plasma β-endorphin concentrations, two pre- and post-competition training weeks at aerobic workout and two competitive show jumping event days at anaerobic workout were measured before, 5 and 30 min after exercise. Exercise intensity is described using lactate concentrations and heart rate. The circuit design, intensity, and duration of training sessions were the same for both groups. In Group A, one-way analysis of variance for repeated measures (RM-ANOVA) showed significant effects of exercise on β-endorphin changes (F=14.41; p<0.001), only in the post-competition training sessions, while in Group B showed no significant effects. Two-way RM-ANOVA showed, after post-competition training sessions, a significant difference between Group A and Group B (F=6.235; p=0.023), with higher β-endorphin changes in Group A, compared to Group B. During the competitive show jumping sessions, one-way RM ANOVA showed significant effects of exercise on β-endorphin changes (F=51.10; p<0.001). The statistical analysis, in Group A, showed a significant difference between post-competition training and competitive exercise (F=6.32; p=0.024) with higher β-endorphin values in competitive sessions compared to those of post-competition training. Lactate concentrations seem to be the main factors being correlated with the raise of β-endorphin during anaerobic exercise of competitive events. Exercise of low intensity, as well as that one of training sessions, does not appear to stimulate a significant increased release of β-endorphin and it may depend on the duration of the exercise program. Moreover, the responses during exercise in the course of post-competition training sessions seem to be significantly different from those the pre-competition training. These data show that the preliminary competitive stress induced additional significant changes of β-endorphin pattern. It would reflect the need of a long-lasting modulation of fatigue and pain perception related to the effect of an additional physical and mental effort for the consecutive competitive and training sessions.

  11. Behavioral phenomenology in Alzheimer's disease, frontotemporal dementia, and late-life depression: a retrospective analysis.

    PubMed

    Swartz, J R; Miller, B L; Lesser, I M; Booth, R; Darby, A; Wohl, M; Benson, D F

    1997-04-01

    Often patients in the early stages of Alzheimer's disease (AD), frontotemporal dementia (FTD), and late-life depression can be difficult to differentiate clinically. Although subtle cognitive distinctions exist between these disorders, noncognitive behavioral phenomenology may provide additional discriminating power. In 19 subjects with AD, 19 with FTD, 16 with late-life psychotic depression (LLPD), and 19 with late-life nonpsychotic depression (LLNPD), noncognitive behavioral symptoms were quantified retrospectively using the Schedules for Clinical Assessment in Neuropsychiatry (SCAN) and compared using both a one-way ANOVA and a multivariate stepwise discriminant analysis, which utilized a jackknife procedure. The FTD group showed the highest mean total SCAN score, while the AD group showed the lowest. ANOVA showed significant differences in the mean total SCAN scores between the four diagnostic groups (P < .0001). With the discriminant analysis, the four disorders demonstrated different clusters of behavioral abnormalities and were differentiated by these symptoms (P < .0001). A subset of 14 SCAN item group symptoms was identified that collectively classified the following percentages of subjects in each diagnostic category: AD 94.7%, FTD 100%, LLPD 87.5%, and LLNPD 100%. These results indicate that AD, FTD, LLPD, and LLNPD were distinguished retrospectively by the SCAN without using cognitive data. Better definition of the longitudinal course of noncognitive behavioral symptoms in different dementias and psychiatric disorders will be valuable both for diagnosis and to help define behavioral syndromes that are associated with selective neuroanatomic and neurochemical brain pathology.

  12. Two-way ANOVA Problems with Simple Numbers.

    ERIC Educational Resources Information Center

    Read, K. L. Q.; Shihab, L. H.

    1998-01-01

    Describes how to construct simple numerical examples in two-way ANOVAs, specifically randomized blocks, balanced two-way layouts, and Latin squares. Indicates that working through simple numerical problems is helpful to students meeting a technique for the first time and should be followed by computer-based analysis of larger, real datasets when…

  13. The Effectiveness of Worked Examples Associated with Presentation Format and Prior Knowledge: A Web-Based Experiment

    ERIC Educational Resources Information Center

    Hsiao, E-Ling

    2010-01-01

    The aim of this study is to explore whether presentation format and prior knowledge affect the effectiveness of worked examples. The experiment was conducted through a specially designed online instrument. A 2X2X3 factorial before-and-after design was conducted. Three-way ANOVA was employed for data analysis. The result showed first, that prior…

  14. ERP evidence suggests executive dysfunction in ecstasy polydrug users.

    PubMed

    Roberts, C A; Fairclough, S H; Fisk, J E; Tames, F; Montgomery, C

    2013-08-01

    Deficits in executive functions such as access to semantic/long-term memory have been shown in ecstasy users in previous research. Equally, there have been many reports of equivocal findings in this area. The current study sought to further investigate behavioural and electro-physiological measures of this executive function in ecstasy users. Twenty ecstasy-polydrug users, 20 non-ecstasy-polydrug users and 20 drug-naïve controls were recruited. Participants completed background questionnaires about their drug use, sleep quality, fluid intelligence and mood state. Each individual also completed a semantic retrieval task whilst 64 channel Electroencephalography (EEG) measures were recorded. Analysis of Variance (ANOVA) revealed no between-group differences in behavioural performance on the task. Mixed ANOVA on event-related potential (ERP) components P2, N2 and P3 revealed significant between-group differences in the N2 component. Subsequent exploratory univariate ANOVAs on the N2 component revealed marginally significant between-group differences, generally showing greater negativity at occipito-parietal electrodes in ecstasy users compared to drug-naïve controls. Despite absence of behavioural differences, differences in N2 magnitude are evidence of abnormal executive functioning in ecstasy-polydrug users.

  15. Comparative study on bioremediation of heavy metals by solitary ascidian, Phallusia nigra, between Thoothukudi and Vizhinjam ports of India.

    PubMed

    Abdul Jaffar Ali, H; Tamilselvi, M; Akram, A Soban; Kaleem Arshan, M L; Sivakumar, V

    2015-11-01

    Ascidians belonging to the sub-phylum Uro-chordata are used as potential model organisms in various parts of the world for biosorption of metals. The sedentary nature, filter feeding habits, presence of vanadocytes and the absence of kidneys cause them to accumulate metals. The present study was aimed to compare biosorption of metals such as cadmium, copper, lead, mercury and vanadium in test and mantle body of solitary ascidian Phallusia nigra between two ecologically significant stations such as Thoothukudi (Station 1) and Vizhinjam (Station 2) ports of India. Monthly samplings of water and P. nigra were done for a period of one year from September 2010 to August 2011 and subjected to analysis of metal accumulation. The average metal concentrations except mercury in the Thoothukudi water were found to be higher of comparable magnitudes than the Vizhinjam water. One-way ANOVA showed significant differences between the stations. A comparison of average metal concentrations in the test and mantle body of P. nigra between two stations showed that the enrichment of V, Cd, Pb, Cu and Hg in the Thoothukudi samples may be due to high bioaccumulation factors of these elements as compared to other species of ascidians. The bioaccumulation factors were in the order of V>Pb>Cd>Cu> Hg for the test and mantle body in stations 1 and 2. Application of one-way ANOVA for the concentration of these metals between test and mantle body showed significant differences in both stations. Similarly, ANOVA for biosorption of these trace metals by P. nigra showed significant difference between stations. Metal concentrations recorded in this ascidian could effectively be used as good reference material for monitoring metal contamination in Indian sea waters. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Modelling uncertainty in incompressible flow simulation using Galerkin based generalized ANOVA

    NASA Astrophysics Data System (ADS)

    Chakraborty, Souvik; Chowdhury, Rajib

    2016-11-01

    This paper presents a new algorithm, referred to here as Galerkin based generalized analysis of variance decomposition (GG-ANOVA) for modelling input uncertainties and its propagation in incompressible fluid flow. The proposed approach utilizes ANOVA to represent the unknown stochastic response. Further, the unknown component functions of ANOVA are represented using the generalized polynomial chaos expansion (PCE). The resulting functional form obtained by coupling the ANOVA and PCE is substituted into the stochastic Navier-Stokes equation (NSE) and Galerkin projection is employed to decompose it into a set of coupled deterministic 'Navier-Stokes alike' equations. Temporal discretization of the set of coupled deterministic equations is performed by employing Adams-Bashforth scheme for convective term and Crank-Nicolson scheme for diffusion term. Spatial discretization is performed by employing finite difference scheme. Implementation of the proposed approach has been illustrated by two examples. In the first example, a stochastic ordinary differential equation has been considered. This example illustrates the performance of proposed approach with change in nature of random variable. Furthermore, convergence characteristics of GG-ANOVA has also been demonstrated. The second example investigates flow through a micro channel. Two case studies, namely the stochastic Kelvin-Helmholtz instability and stochastic vortex dipole, have been investigated. For all the problems results obtained using GG-ANOVA are in excellent agreement with benchmark solutions.

  17. The relative age effect among elite youth competitive swimmers.

    PubMed

    Costa, Aldo M; Marques, Mário C; Louro, Hugo; Ferreira, Sandra S; Marinho, Daniel A

    2013-01-01

    The aim of this study was to analyse the relative age effect (RAE) in competitive swimming. The best 50 Portuguese swimmers (12- to 18-year-olds) for the main individual swimming pool events of both genders were considered. Analysis was conducted on 7813 swimming event participants, taking account of respective swimmer birth dates and the Fédération Internationale de Natation points gained. Differences in the distribution of birth dates by quarter year were determined using the Chi-square. A one-way analysis of variance ANOVA was used to test for differences measured in points between individuals by quarterly birth year intervals. A two-way analysis of variance ANOVA was also conducted to test the interaction between gender and seasonal birth date with regard to performance. The results show an inequitable distribution (p<0.01) of birth dates by quarter for almost all age groups and both genders. However, the distribution of birth dates by quarter for each considered swim event shows that RAE seems to exist only for 12-year-old females and 12- to 15-year-old males. Analysing mean swimming performance, post-hoc results (p<0.01) show no consistency in RAE. Higher performance occurs among older swimmers only in 100 m butterfly (female 1998, 1st≠2nd quarter, p=0.003). The results also show no interaction between gender and seasonal birth date (p<0.01). Findings of this study show that a higher number of swimmers, particular males, are born in the first two quarters of the year, although there is mostly no effect of seasonal birth date on performance differences within the top 50 swimmers.

  18. Application of texture analysis method for mammogram density classification

    NASA Astrophysics Data System (ADS)

    Nithya, R.; Santhi, B.

    2017-07-01

    Mammographic density is considered a major risk factor for developing breast cancer. This paper proposes an automated approach to classify breast tissue types in digital mammogram. The main objective of the proposed Computer-Aided Diagnosis (CAD) system is to investigate various feature extraction methods and classifiers to improve the diagnostic accuracy in mammogram density classification. Texture analysis methods are used to extract the features from the mammogram. Texture features are extracted by using histogram, Gray Level Co-Occurrence Matrix (GLCM), Gray Level Run Length Matrix (GLRLM), Gray Level Difference Matrix (GLDM), Local Binary Pattern (LBP), Entropy, Discrete Wavelet Transform (DWT), Wavelet Packet Transform (WPT), Gabor transform and trace transform. These extracted features are selected using Analysis of Variance (ANOVA). The features selected by ANOVA are fed into the classifiers to characterize the mammogram into two-class (fatty/dense) and three-class (fatty/glandular/dense) breast density classification. This work has been carried out by using the mini-Mammographic Image Analysis Society (MIAS) database. Five classifiers are employed namely, Artificial Neural Network (ANN), Linear Discriminant Analysis (LDA), Naive Bayes (NB), K-Nearest Neighbor (KNN), and Support Vector Machine (SVM). Experimental results show that ANN provides better performance than LDA, NB, KNN and SVM classifiers. The proposed methodology has achieved 97.5% accuracy for three-class and 99.37% for two-class density classification.

  19. Optimization of Dimensional accuracy in plasma arc cutting process employing parametric modelling approach

    NASA Astrophysics Data System (ADS)

    Naik, Deepak kumar; Maity, K. P.

    2018-03-01

    Plasma arc cutting (PAC) is a high temperature thermal cutting process employed for the cutting of extensively high strength material which are difficult to cut through any other manufacturing process. This process involves high energized plasma arc to cut any conducting material with better dimensional accuracy in lesser time. This research work presents the effect of process parameter on to the dimensional accuracy of PAC process. The input process parameters were selected as arc voltage, standoff distance and cutting speed. A rectangular plate of 304L stainless steel of 10 mm thickness was taken for the experiment as a workpiece. Stainless steel is very extensively used material in manufacturing industries. Linear dimension were measured following Taguchi’s L16 orthogonal array design approach. Three levels were selected to conduct the experiment for each of the process parameter. In all experiments, clockwise cut direction was followed. The result obtained thorough measurement is further analyzed. Analysis of variance (ANOVA) and Analysis of means (ANOM) were performed to evaluate the effect of each process parameter. ANOVA analysis reveals the effect of input process parameter upon leaner dimension in X axis. The results of the work shows that the optimal setting of process parameter values for the leaner dimension on the X axis. The result of the investigations clearly show that the specific range of input process parameter achieved the improved machinability.

  20. Waddell non-organic signs: new evidence suggests somatic amplification among outpatient chronic pain patients.

    PubMed

    Wygant, Dustin B; Arbisi, Paul A; Bianchini, Kevin J; Umlauf, Robert L

    2017-04-01

    Waddell et al. identified a set of eight non-organic signs in 1980. There has been controversy about their meaning, particularly with respect to their use as validity indicators. The current study examined the Waddell signs in relation to measures of somatic amplification or over-reporting in a sample of outpatient chronic pain patients. We examined the degree to which these signs were associated with measures of over-reporting. This study examined scores on the Waddell signs in relation to over-reporting indicators in an outpatient chronic pain sample. We examined 230 chronic pain patients treated at a multidisciplinary pain clinic. The majority of these patients presented with primary back or spinal injuries. The outcome measures used in the study were Waddell signs, Modified Somatic Perception Questionnaire, Pain Disability Index, and the Minnesota Multiphasic Personality Inventory-2 Restructured Form. We examined Waddell signs using multivariate analysis of variance (MANOVA) and analysis of variance (ANOVA), receiver operating characteristic analysis, classification accuracy, and relative risk ratios. Multivariate analysis of variance and ANOVA showed a significant association between Waddell signs and somatic amplification. Classification analyses showed increased odds of somatic amplification at a Waddell score of 2 or 3. Our results found significant evidence of an association between Waddell signs and somatic over-reporting. Elevated scores on the Waddell signs (particularly scores higher than 2 and 3) were associated with increased odds of exhibiting somatic over-reporting. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. ANOVA like analysis of cancer death age

    NASA Astrophysics Data System (ADS)

    Areia, Aníbal; Mexia, João T.

    2016-06-01

    We use ANOVA to study the influence of year, sex, country and location on the average cancer death age. The data used was from the World Health Organization (WHO) files for 1999, 2003, 2007 and 2011. The locations considered were: kidney, leukaemia, melanoma of skin and oesophagus and the countries: Portugal, Norway, Greece and Romania.

  2. Cautionary Note on Reporting Eta-Squared Values from Multifactor ANOVA Designs

    ERIC Educational Resources Information Center

    Pierce, Charles A.; Block, Richard A.; Aguinis, Herman

    2004-01-01

    The authors provide a cautionary note on reporting accurate eta-squared values from multifactor analysis of variance (ANOVA) designs. They reinforce the distinction between classical and partial eta-squared as measures of strength of association. They provide examples from articles published in premier psychology journals in which the authors…

  3. Should a First Course in ANOVA Be Taught Through MLR?

    ERIC Educational Resources Information Center

    Williams, John D.

    Before implementing a course in the analysis of variance (ANOVA) taught through multiple linear regression, several concerns must be addressed. Adequate computer facilities that are available to students on a low-cost or cost-free basis are necessary; also students must be able to meaningfully communicate with their major advisor regarding their…

  4. Planned Comparisons as Better Alternatives to ANOVA Omnibus Tests.

    ERIC Educational Resources Information Center

    Benton, Roberta L.

    Analyses of data are presented to illustrate the advantages of using a priori or planned comparisons rather than omnibus analysis of variance (ANOVA) tests followed by post hoc or posteriori testing. The two types of planned comparisons considered are planned orthogonal non-trend coding contrasts and orthogonal polynomial or trend contrast coding.…

  5. Use of "t"-Test and ANOVA in Career-Technical Education Research

    ERIC Educational Resources Information Center

    Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

    2012-01-01

    Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

  6. Assessment of Adolescent Perceptions on Parental Attitudes on Different Variables

    ERIC Educational Resources Information Center

    Ersoy, Evren

    2015-01-01

    The purpose of this study is to examine secondary school student perceptions of parental attitudes with regards to specific variables. Independent samples t test for parametric distributions and one-way variance analysis (ANOVA) was used for analyzing the data, when the ANOVA analyses were significant Scheffe test was conducted on homogeneous…

  7. Analysis of repeated measurement data in the clinical trials

    PubMed Central

    Singh, Vineeta; Rana, Rakesh Kumar; Singhal, Richa

    2013-01-01

    Statistics is an integral part of Clinical Trials. Elements of statistics span Clinical Trial design, data monitoring, analyses and reporting. A solid understanding of statistical concepts by clinicians improves the comprehension and the resulting quality of Clinical Trials. In biomedical research it has been seen that researcher frequently use t-test and ANOVA to compare means between the groups of interest irrespective of the nature of the data. In Clinical Trials we record the data on the patients more than two times. In such a situation using the standard ANOVA procedures is not appropriate as it does not consider dependencies between observations within subjects in the analysis. To deal with such types of study data Repeated Measure ANOVA should be used. In this article the application of One-way Repeated Measure ANOVA has been demonstrated by using the software SPSS (Statistical Package for Social Sciences) Version 15.0 on the data collected at four time points 0 day, 15th day, 30th day, and 45th day of multicentre clinical trial conducted on Pandu Roga (~Iron Deficiency Anemia) with an Ayurvedic formulation Dhatrilauha. PMID:23930038

  8. Evaluation of the three-dimensional accuracy of implant impression techniques in two simulated clinical conditions by optical scanning.

    PubMed

    Sabouhi, Mahmoud; Bajoghli, Farshad; Abolhasani, Majid

    2015-01-01

    The success of an implant-supported prosthesis is dependent on the passive fit of its framework fabricated on a precise cast. The aim of this in vitro study was to digitally compare the three-dimensional accuracy of implant impression techniques in partially and completely edentulous conditions. The master model simulated two clinical conditions. The first condition was a partially edentulous mandibular arch with an anterior edentulous space (D condition). Two implant analogs were inserted in bilateral canine sites. After elimination of the teeth, the model was converted to a completely edentulous condition (E condition). Three different impression techniques were performed (open splinted [OS], open unsplinted [OU], closed [C]) for each condition. Six groups of casts (DOS, DOU, DC, EOS, EOU, EC) (n = 8), totaling 48 casts, were made. Two scan bodies were secured onto the master edentulous model and onto each test cast and digitized by an optical scanning system. The related scans were superimposed, and the mean discrepancy for each cast was determined. The statistical analysis showed no significant difference in the accuracy of casts as a function of model status (P = .78, analysis of variance [ANOVA] test), impression technique (P = .57, ANOVA test), or as the combination of both (P = .29, ANOVA test). The distribution of data was normal (Kolmogorov-Smirnov test). Model status (dentate or edentulous) and impression technique did not influence the precision of the casts. There is no difference among any of the impression techniques in either simulated clinical condition.

  9. Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach

    PubMed Central

    Seeley, Matthew K.; Francom, Devin; Reese, C. Shane; Hopkins, J. Ty

    2017-01-01

    Abstract In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle, knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. When using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function. PMID:29339984

  10. Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach.

    PubMed

    Park, Jihong; Seeley, Matthew K; Francom, Devin; Reese, C Shane; Hopkins, J Ty

    2017-12-01

    In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle, knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. When using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function.

  11. Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Park, Jihong; Seeley, Matthew K.; Francom, Devin

    In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle,more » knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. Thus when using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function.« less

  12. Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach

    DOE PAGES

    Park, Jihong; Seeley, Matthew K.; Francom, Devin; ...

    2017-12-28

    In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle,more » knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. Thus when using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function.« less

  13. Four-way-leaning test shows larger limits of stability than a circular-leaning test.

    PubMed

    Thomsen, Mikkel Højgaard; Støttrup, Nicolai; Larsen, Frederik Greve; Pedersen, Ann-Marie Sydow Krogh; Poulsen, Anne Grove; Hirata, Rogerio Pessoto

    2017-01-01

    Limits of stability (LOS) have extensive clinical and rehabilitational value yet no standard consensus on measuring LOS exists. LOS measured using a leaning or a circling protocol is commonly used in research and clinical settings, however differences in protocols and reliability problems exist. This study measured LOS using a four-way-leaning test and a circular-leaning test to test which showed larger LOS measurements. Furthermore, number of adaptation trials needed for consistent results was assessed. Limits of stability were measured using a force plate (Metitur Good Balance System ® ) sampling at 50Hz. Thirty healthy subjects completed 30 trials assessing LOS alternating between four-way-leaning test and circular-leaning test. A main effect of methods (ANOVA:F(1,28)=45.86, P<0.01) with the four-way-leaning test showing larger values than the circular-leaning test (NK, P<0.01). An interaction between method×directions was found (ANOVA:F(3, 84)=24.87, P<0.01). The four-way-leaning test showed larger LOS in anterior (NK, P<0.05), right (NK, P<0.01) and left direction (NK, P<0.01). Analysis of LOS for the four-way-leaning test showed a difference between trials (ANOVA:F(14,392)=7.81, P<0.01). Differences were found between trial 1 and 7 (NK, P<0.03), trial 6 and 8 (NK, P<0.02) and trial 7 and 15 (NK, P<0.02). Four-way-leaning test showed high correlation (ICC>0.87) between first and second trial for all directions. Four-way-leaning test yields larger LOS in anterior, right and left direction making it more reliable when measuring LOS. A learning effect was found up to the 8th trial, which suggests using 8 adaptation trials before reliable LOS is measured. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Role of Adenosine Receptor A2A in Traumatic Optic Neuropathies (Addendum)

    DTIC Science & Technology

    2016-03-01

    inflammation was evaluated using Western blot, Real-Time PCR and immuno-staining analyses. Role of A2AAR signaling in the anti-inflammation effect of ABT...Neuroimmunology 277 (2014) 96–104were evaluated by analysis of variance (one-way ANOVA), and the significance of differences between groups was assessed by the...Ahmad et al. / Journal of Neuroimmunology 277 (2014) 96–104were evaluated by analysis of variance (one-way ANOVA), and the significance of differences

  15. Cytocompatibility and biocompatibility of nanostructured carbonated hydroxyapatite spheres for bone repair

    PubMed Central

    CALASANS-MAIA, Mônica Diuana; de MELO, Bruno Raposo; ALVES, Adriana Terezinha Neves Novellino; RESENDE, Rodrigo Figueiredo de Brito; LOURO, Rafael Seabra; SARTORETTO, Suelen Cristina; GRANJEIRO, José Mauro; ALVES, Gutemberg Gomes

    2015-01-01

    ABSTRACT Objective The aim of this study was to investigate the in vitro and in vivo biological responses to nanostructured carbonated hydroxyapatite/calcium alginate (CHA) microspheres used for alveolar bone repair, compared to sintered hydroxyapatite (HA). Material and Methods The maxillary central incisors of 45 Wistar rats were extracted, and the dental sockets were filled with HA, CHA, and blood clot (control group) (n=5/period/group). After 7, 21 and 42 days, the samples of bone with the biomaterials were obtained for histological and histomorphometric analysis, and the plasma levels of RANKL and OPG were determined via immunoassay. Statistical analysis was performed by Two-Way ANOVA with post-hoc Tukey test at 95% level of significance. Results The CHA and HA microspheres were cytocompatible with both human and murine cells on an in vitro assay. Histological analysis showed the time-dependent increase of newly formed bone in control group characterized by an intense osteoblast activity. In HA and CHA groups, the presence of a slight granulation reaction around the spheres was observed after seven days, which was reduced by the 42nd day. A considerable amount of newly formed bone was observed surrounding the CHA spheres and the biomaterials particles at 42-day time point compared with HA. Histomorphometric analysis showed a significant increase of newly formed bone in CHA group compared with HA after 21 and 42 days from surgery, moreover, CHA showed almost 2-fold greater biosorption than HA at 42 days (two-way ANOVA, p<0.05) indicating greater biosorption. An increase in the RANKL/OPG ratio was observed in the CHA group on the 7th day. Conclusion CHA spheres were osteoconductive and presented earlier biosorption, inducing early increases in the levels of proteins involved in resorption. PMID:26814461

  16. Eta Squared, Partial Eta Squared, and Misreporting of Effect Size in Communication Research.

    ERIC Educational Resources Information Center

    Levine, Timothy R.; Hullett, Craig R.

    2002-01-01

    Alerts communication researchers to potential errors stemming from the use of SPSS (Statistical Package for the Social Sciences) to obtain estimates of eta squared in analysis of variance (ANOVA). Strives to clarify issues concerning the development and appropriate use of eta squared and partial eta squared in ANOVA. Discusses the reporting of…

  17. Finding P-Values for F Tests of Hypothesis on a Spreadsheet.

    ERIC Educational Resources Information Center

    Rochowicz, John A., Jr.

    The calculation of the F statistic for a one-factor analysis of variance (ANOVA) and the construction of an ANOVA tables are easily implemented on a spreadsheet. This paper describes how to compute the p-value (observed significance level) for a particular F statistic on a spreadsheet. Decision making on a spreadsheet and applications to the…

  18. [The most common vital events in women 45-64 years of age. Repercussions as psychophysical stressors].

    PubMed

    Marín Torrens, R M; Sánchez Cánovas, J; Donat Colomer, F; Dupuy Layo, M J; Salas Trejo, M D

    1996-05-15

    To find what vital events middle-aged women in our society most often experience and their influence as stress factors on physical health and subjective psychological well-being. A multivariant transversal study. 5 primary care centres in Valencia and Alicante. 306 women chosen at random among those seen at these health centres. Frequency analysis of vital events. Correlation analysis with questionnaires on physical symptoms and diseases, psychological well-being, work situation, emotional behaviour, sexuality and relationships with their partner. ANOVA: dividing the sample into 2 groups based on mean adaptive effort. The most common events numbered 23. The ANOVA showed a significant association between greater adaptive effort and negative emotional behaviour, personal control, material well-being, relationship with the partner, and physical and psychological symptoms. The relevance of daily events as generators of stress was confirmed, as was the impact of these and major events on these women's physical and psychological health. The importance of attending women at this stage of their lives from an integrated and interdisciplinary perspective, which tackles the physiological, psychological and cultural features together, was shown.

  19. Morphometric assessment of the red stripe weevils, Rhynchophorus vulneratus (Coleoptera: Curculionidae) from several localities in Malaysia

    NASA Astrophysics Data System (ADS)

    Sazali, Siti Nurlydia; Hazmi, Izfa Riza; Rahim, Faszly; Abang, Fatimah; Jemain, Abdul Aziz

    2018-04-01

    The recognition of intraspecific variation could enhance knowledge and understanding on the population divergence that might be resulted from different geographical areas. To study the possible effect derived from different locations, a morphometric study of the red stripe weevils, Rhynchophorus vulneratus from different localities in Malaysia was conducted using field and voucher specimens. A total of twenty-three morphological characters were examined from 108 individuals of R. vulneratus representing population of Kota Samarahan, Mukah and central of Peninsular Malaysia. The data were subjected to univariate one-way single factor analysis of variance (ANOVA) and analysed in factor analysis using SPSS version 22.0 software. Univariate ANOVA showed that all tested variables were significantly different (p<0.05) except for mesocoxal distance (MSD), meanwhile from the factor analysis, the first three factors with eigenvalues greater than 1.0 were successfully extracted, resulting in a high variation of 82.687%. For factor 1, 39.213% of total variation was recorded, factor 2 accounted for 34.096% and factor 3 contributing to 9.377%, respectively. The mixed plotting among the twenty-three morphological characters suggests a strong correlation among the parameters examined and further statistical analysis should be conducted to include environmental factors such as habitat types, food availability and predation effect.

  20. One-way ANOVA based on interval information

    NASA Astrophysics Data System (ADS)

    Hesamian, Gholamreza

    2016-08-01

    This paper deals with extending the one-way analysis of variance (ANOVA) to the case where the observed data are represented by closed intervals rather than real numbers. In this approach, first a notion of interval random variable is introduced. Especially, a normal distribution with interval parameters is introduced to investigate hypotheses about the equality of interval means or test the homogeneity of interval variances assumption. Moreover, the least significant difference (LSD method) for investigating multiple comparison of interval means is developed when the null hypothesis about the equality of means is rejected. Then, at a given interval significance level, an index is applied to compare the interval test statistic and the related interval critical value as a criterion to accept or reject the null interval hypothesis of interest. Finally, the method of decision-making leads to some degrees to accept or reject the interval hypotheses. An applied example will be used to show the performance of this method.

  1. The comet assay for the evaluation of genotoxic potential of landfill leachate.

    PubMed

    Widziewicz, Kamila; Kalka, Joanna; Skonieczna, Magdalena; Madej, Paweł

    2012-01-01

    Genotoxic assessment of landfill leachate before and after biological treatment was conducted with two human cell lines (Me45 and NHDF) and Daphnia magna somatic cells. The alkali version of comet assay was used to examine genotoxicity of leachate by DNA strand breaks analysis and its repair dynamics. The leachate samples were collected from Zabrze landfill, situated in the Upper Silesian Industrial District, Poland. Statistically significant differences (Kruskal-Wallice ANOVA rank model) were observed between DNA strand breaks in cells incubated with leachate before and after treatment (P < 0.001). Nonparametric Friedman ANOVA confirmed time-reliable and concentration-reliable cells response to leachate concentration. Examinations of chemical properties showed a marked decrease in leachate parameters after treatment which correlate to reduced genotoxicity towards tested cells. Obtained results demonstrate that biological cotreatment of leachate together with municipal wastewater is an efficient method for its genotoxic potential reduction; however, treated leachate still possessed genotoxic character.

  2. The Comet Assay for the Evaluation of Genotoxic Potential of Landfill Leachate

    PubMed Central

    Widziewicz, Kamila; Kalka, Joanna; Skonieczna, Magdalena; Madej, Paweł

    2012-01-01

    Genotoxic assessment of landfill leachate before and after biological treatment was conducted with two human cell lines (Me45 and NHDF) and Daphnia magna somatic cells. The alkali version of comet assay was used to examine genotoxicity of leachate by DNA strand breaks analysis and its repair dynamics. The leachate samples were collected from Zabrze landfill, situated in the Upper Silesian Industrial District, Poland. Statistically significant differences (Kruskal-Wallice ANOVA rank model) were observed between DNA strand breaks in cells incubated with leachate before and after treatment (P < 0.001). Nonparametric Friedman ANOVA confirmed time-reliable and concentration-reliable cells response to leachate concentration. Examinations of chemical properties showed a marked decrease in leachate parameters after treatment which correlate to reduced genotoxicity towards tested cells. Obtained results demonstrate that biological cotreatment of leachate together with municipal wastewater is an efficient method for its genotoxic potential reduction; however, treated leachate still possessed genotoxic character. PMID:22666120

  3. Counting with Colours? Effect of Colours on the Numerical Abilities of House Crows (Corvus splendens) and Common Myna (Acridotheres tristis)

    PubMed Central

    Rahman, Nor Amira Abdul; Ali, Zalila; Zuharah, Wan Fatma; Fadzly, Nik

    2016-01-01

    We conducted several aviary experiments to investigate the influence of colours in quantity judgments of two species of birds; house crow (Corvus splendens) and common myna (Acridotheres tristis). Different quantity (in seven different food proportions) of mealworms were presented nonsequentially to all birds using artificially coloured red mealworms, for experiment 1, and using artificially coloured green mealworms, for experiment 2. Both red and green coloured mealworms have no significant effect on house crow’s quantity judgments (red: ANOVA: F6,30 = 1.748, p = 0.144; and green: ANOVA: F6,30= 1.085, p = 0.394). Common myna, however, showed a strong influence of red colour in their quantity judgment (ANOVA: F6,30 = 2.922, p = 0.023) as they succeeded in choosing the largest amount of food between two cups, but not when offered food using green coloured mealworms (ANOVA: F6,30 = 1.183, p = 0.342). In the next experiment, we hypothesised that both house crow and common myna will prefer red coloured food items over green coloured food items, when factors such as the amount of food is equal. We chose to test red and green colours because both colours play an important role in most avian food selections. Results showed that there were no significant differences in the selection of red or green coloured mealworms for both house crows (ANOVA: F6,30 = 2.310, p = 0.06) and common myna (ANOVA: F6,30 = 0.823, p = 0.561). PMID:27688847

  4. Racial/ethnic variation in mental health correlates of substance use among college students.

    PubMed

    Sumstine, Stephanie; Cruz, Sheena; Schroeder, Cassandra; Takeda, Summer; Bavarian, Niloofar

    2018-01-01

    This study investigated mental health indicators, substance use, and their relationships, by race/ethnicity. A probability sample of 1,053 students at two California universities self-reported their frequency of substance use and rated their experience with indicators of mental health. One-way analysis of variance (ANOVA), chi-square tests, and multivariate censored regression models were estimated to examine which indicators of mental health were associated with each substance use form by race/ethnicity. Results from the one-way ANOVA and chi-square tests showed differences in substance use prevalence and mental health by race/ethnicity. For example, students who identified as White demonstrate a higher prevalence for every form of substance use in comparison to the Asian, Latino, and "All other" categories. Results from the regression showed, among Whites, inattention was associated with prescription stimulant misuse, and psychological distress was associated with marijuana use. Among Latinos, inattention was associated with cocaine and prescription stimulant use. Among Asians, psychological distress was associated with tobacco use and the misuse of prescription painkillers. Findings highlight the need to ensure subpopulations receive needed services.

  5. Retentive force and microleakage of stainless steel crowns cemented with three different luting agents.

    PubMed

    Yilmaz, Yucel; Dalmis, Anya; Gurbuz, Taskin; Simsek, Sera

    2004-12-01

    The aim of this investigation was to compare the tensile strength, microleakage, and Scanning Electron Microscope (SEM) evaluations of SSCs cemented using different adhesive cements on primary molars. Sixty-three extracted primary first molars were used. Tooth preparations were done. Crowns were altered and adapted for investigation purpose, and then cemented using glass ionomer cement (Aqua Meron), resin modified cement (RelyX Luting), and resin cement (Panavia F) on the prepared teeth. Samples were divided into two groups of 30 samples each for tensile strength and microleakage tests. The remaining three samples were used for SEM evaluation. Data were analyzed with one-way ANOVA and Tukey test. The statistical analysis of ANOVA revealed significant differences among the groups for both tensile strength and microleakage tests (p < 0.05). Tukey test showed statistically significant difference between Panavia F and RelyX Luting (p < 0.05), but none between the others (p > 0.05). This study showed that the higher the retentive force a crown possessed, the lower would be the possibility of microleakage.

  6. The analysis of morphometric data on rocky mountain wolves and artic wolves using statistical method

    NASA Astrophysics Data System (ADS)

    Ammar Shafi, Muhammad; Saifullah Rusiman, Mohd; Hamzah, Nor Shamsidah Amir; Nor, Maria Elena; Ahmad, Noor’ani; Azia Hazida Mohamad Azmi, Nur; Latip, Muhammad Faez Ab; Hilmi Azman, Ahmad

    2018-04-01

    Morphometrics is a quantitative analysis depending on the shape and size of several specimens. Morphometric quantitative analyses are commonly used to analyse fossil record, shape and size of specimens and others. The aim of the study is to find the differences between rocky mountain wolves and arctic wolves based on gender. The sample utilised secondary data which included seven variables as independent variables and two dependent variables. Statistical modelling was used in the analysis such was the analysis of variance (ANOVA) and multivariate analysis of variance (MANOVA). The results showed there exist differentiating results between arctic wolves and rocky mountain wolves based on independent factors and gender.

  7. Influence of training and competitive sessions on peripheral β-endorphin levels in training show jumping horses

    PubMed Central

    Cravana, Cristina; Medica, P.; Ragonese, G.; Fazio, E.

    2017-01-01

    Aim: To investigate the effects of training sessions on circulating β-endorphin changes in sport horses before and after competition and to ascertain whether competition would affect this response. Materials and Methods: A total of 24 trained jumping horses were randomly assigned to one of two training groups: Group A (competing) and Group B (not competing). To determined plasma β-endorphin concentrations, two pre- and post-competition training weeks at aerobic workout and two competitive show jumping event days at anaerobic workout were measured before, 5 and 30 min after exercise. Exercise intensity is described using lactate concentrations and heart rate. The circuit design, intensity, and duration of training sessions were the same for both groups. Results: In Group A, one-way analysis of variance for repeated measures (RM-ANOVA) showed significant effects of exercise on β-endorphin changes (F=14.41; p<0.001), only in the post-competition training sessions, while in Group B showed no significant effects. Two-way RM-ANOVA showed, after post-competition training sessions, a significant difference between Group A and Group B (F=6.235; p=0.023), with higher β-endorphin changes in Group A, compared to Group B. During the competitive show jumping sessions, one-way RM ANOVA showed significant effects of exercise on β-endorphin changes (F=51.10; p<0.001). The statistical analysis, in Group A, showed a significant difference between post-competition training and competitive exercise (F=6.32; p=0.024) with higher β-endorphin values in competitive sessions compared to those of post-competition training. Conclusion: Lactate concentrations seem to be the main factors being correlated with the raise of β-endorphin during anaerobic exercise of competitive events. Exercise of low intensity, as well as that one of training sessions, does not appear to stimulate a significant increased release of β-endorphin and it may depend on the duration of the exercise program. Moreover, the responses during exercise in the course of post-competition training sessions seem to be significantly different from those the pre-competition training. These data show that the preliminary competitive stress induced additional significant changes of β-endorphin pattern. It would reflect the need of a long-lasting modulation of fatigue and pain perception related to the effect of an additional physical and mental effort for the consecutive competitive and training sessions. PMID:28246449

  8. Determining baselines and variability of elements in plants and soils near the Kenai National Wildlife Refuge, Alaska

    USGS Publications Warehouse

    Crock, J.G.; Severson, R.C.; Gough, L.P.

    1992-01-01

    Recent investigations on the Kenai Peninsula had two major objectives: (1) to establish elemental baseline concentrations ranges for native vegetation and soils; and, (2) to determine the sampling density required for preparing stable regional geochemical maps for various elements in native plants and soils. These objectives were accomplished using an unbalanced, nested analysis-of-variance (ANOVA) barbell sampling design. Hylocomium splendens (Hedw.) BSG (feather moss, whole plant), Picea glauca (Moench) Voss (white spruce, twigs and needles), and soil horizons (02 and C) were collected and analyzed for major and trace total element concentrations. Using geometric means and geometric deviations, expected baseline ranges for elements were calculated. Results of the ANOVA show that intensive soil or plant sampling is needed to reliably map the geochemistry of the area, due to large local variability. For example, producing reliable element maps of feather moss using a 50 km cell (at 95% probability) would require sampling densities of from 4 samples per cell for Al, Co, Fe, La, Li, and V, to more than 15 samples per cell for Cu, Pb, Se, and Zn.Recent investigations on the Kenai Peninsula had two major objectives: (1) to establish elemental baseline concentrations ranges for native vegetation and soils; and, (2) to determine the sampling density required for preparing stable regional geochemical maps for various elements in native plants and soils. These objectives were accomplished using an unbalanced, nested analysis-of-variance (ANOVA) barbell sampling design. Hylocomium splendens (Hedw.) BSG (feather moss, whole plant), Picea glauca (Moench) Voss (white spruce, twigs and needles), and soil horizons (02 and C) were collected and analyzed for major and trace total element concentrations. Using geometric means and geometric deviations, expected baseline ranges for elements were calculated. Results of the ANOVA show that intensive soil or plant sampling is needed to reliably map the geochemistry of the area, due to large local variability. For example, producing reliable element maps of feather moss using a 50 km cell (at 95% probability) would require sampling densities of from 4 samples per cell Al, Co, Fe, La, Li, and V, to more than 15 samples per cell for Cu, Pb, Se, and Zn.

  9. Meta-analysis of the relationship between TQM and Business Performance

    NASA Astrophysics Data System (ADS)

    F, Ahmad M.; N, Zakuan; A, Jusoh; Z, Tasir; J, Takala

    2013-06-01

    Meta-analysis has been conducted based on 20 previous works from 4,040 firms at 16 countries from Asia, Europe and America. Throughout this paper a meta-analysis, this paper reviews the relationships between TQM and business performance amongst the regions. Meta-analysis result concludes that the average of rc is 0.47; Asia (rc=0.54), America (rc=0.43) and Europe (rc=0.38). The analysis also shows that Asia developed countries have greatest impact of TQM (rc=0.56). However, the analysis of ANOVA and t-test show that there is no significant difference amongst type of country (developed and developing countries) and regions at p=0.05. In addition, the average result of rc2 is 0.24; Asia (rc2=0.33), America (rc2=0.22) and Europe (rc2=0.15). Meanwhile, rc2 in developing countries (rc2=0.28) are higher than developed countries (rc2=0.21).

  10. [How medical students perform academically by admission types?].

    PubMed

    Kim, Se-Hoon; Lee, Keumho; Hur, Yera; Kim, Ji-Ha

    2013-09-01

    Despite the importance of selecting students whom are capable for medical education and to become a good doctor, not enough studies have been done in the category. This study focused on analysing the medical students' academic performance (grade point average, GPA) differences, flunk and dropout rates by admission types. From 2004 to 2010, we gathered 369 Konyang University College of Medicine's students admission data and analyzed the differences between admission method and academic achievement, differences in failure and dropout rates. Analysis of variance (ANOVA), ordinary least square, and logistic regression were used. The rolling students showed higher academic achievement from year 1 to 3 than regular students (p < 0.01). Using admission type variable as control variable in multiple regression model similar results were shown. But unlike the results of ANOVA, GPA differences by admission types were shown not only in lower academic years but also in year 6 (p < 0.01). From the regression analysis of flunk and dropout rate by admission types, regular admission type students showed higher drop out rate than the rolling ones which demonstrates admission types gives significant effect on flunk or dropout rates in medical students (p < 0.01). The rolling admissions type students tend to show lower flunk rate and dropout rates and perform better academically. This implies selecting students primarily by Korean College Scholastic Ability Test does not guarantee their academic success in medical education. Thus we suggest a more in-depth comprehensive method of selecting students that are appropriate to individual medical school's educational goal.

  11. Increasing the Efficiency on Producing Radiology Reports for Breast Cancer Diagnosis by Means of Structured Reports. A Comparative Study.

    PubMed

    Segrelles, J Damian; Medina, Rosana; Blanquer, Ignacio; Martí-Bonmatí, Luis

    2017-05-18

    Radiology reports are commonly written on free-text using voice recognition devices. Structured reports (SR) have a high potential but they are usually considered more difficult to fill-in so their adoption in clinical practice leads to a lower efficiency. However, some studies have demonstrated that in some cases, producing SRs may require shorter time than plain-text ones. This work focuses on the definition and demonstration of a methodology to evaluate the productivity of software tools for producing radiology reports. A set of SRs for breast cancer diagnosis based on BI-RADS have been developed using this method. An analysis of their efficiency with respect to free-text reports has been performed. The methodology proposed compares the Elapsed Time (ET) on a set of radiological reports. Free-text reports are produced with the speech recognition devices used in the clinical practice. Structured reports are generated using a web application generated with TRENCADIS framework. A team of six radiologists with three different levels of experience in the breast cancer diagnosis was recruited. These radiologists performed the evaluation, each one introducing 50 reports for mammography, 50 for ultrasound scan and 50 for MRI using both approaches. Also, the Relative Efficiency (REF) was computed for each report, dividing the ET of both methods. We applied the T-Student (T-S) test to compare the ETs and the ANOVA test to compare the REFs. Both tests were computed using the SPSS software. The study produced three DICOM-SR templates for Breast Cancer Diagnosis on mammography, ultrasound and MRI, using RADLEX terms based on BIRADs 5th edition. The T-S test on radiologists with high or intermediate profile, showed that the difference between the ET was only statistically significant for mammography and ultrasound. The ANOVA test performed grouping the REF by modalities, indicated that there were no significant differences between mammograms and ultrasound scans, but both have significant statistical differences with MRI. The ANOVA test of the REF for each modality, indicated that there were only significant differences in Mammography (ANOVA p = 0.024) and Ultrasound (ANOVA p = 0.008). The ANOVA test for each radiologist profile, indicated that there were significant differences on the high profile (ANOVA p = 0.028) and medium (ANOVA p = 0.045). In this work, we have defined and demonstrated a methodology to evaluate the productivity of software tools for producing radiology reports in Breast Cancer. We have evaluated that adopting Structured Reporting in mammography and ultrasound studies in breast cancer diagnosis improves the performance in producing reports.

  12. Evaluation of recovery and quality of sexual activity in women during postpartum in relation to the different mode of delivery: a retrospective analysis.

    PubMed

    Laganà, A S; Burgio, M A; Ciancimino, L; Sicilia, A; Pizzo, A; Magno, C; Butticè, S; Triolo, O

    2015-08-01

    Aim of the study was to assess the recovery and quality of sexual activity of women during postpartum, in relation to delivery. We recruited 200 women at 8 weeks after delivery. For each patient we recorded mode of delivery, age, body mass index (BMI), parity and test Female Sexual Function Index (FSFI) score. Sixty-four women (32%) had spontaneous deliveries without episiotomy, 48 (24%) had it with episiotomy, 88 (44%) had caesarean sections. The analysis of variance (ANOVA) test showed no significant differences among the 3 groups for age, BMI, parity. The test FSFI evidenced 68 cases (34%) of Regular Female Sexual Function (RFSF) and 132 (66%) of Female Sexual Dysfunction (FSD). The ANOVA test showed significant differences among the 3 groups in RFSF (F [2, 14]=8.075, P=0.005), but not in FSD (F [2, 30]=2.646, P=0.087). In RFSF, FSFI score was higher in women who had vaginal delivery with episiotomy compared with the other two groups. Conversely, in FSD (both with or without resumed sexual activity at 8 weeks postpartum) we evidenced that patients who had vaginal delivery with episiotomy showed lower FSFI score than the other two groups, with a decrease in lubrication, orgasm and satisfaction scores. Furthermore, we observed that most of the RFSF patients had a job and breastfed. Our results did not evidence a direct and significant correlation between mode of delivery and onset of female postpartum sexual dysfunction, even if FSD patients who underwent episiotomy during delivery markedly showed low FSFI scores.

  13. Factors Associated with the Competencies of Public Health Workers in Township Hospitals: A Cross-Sectional Survey in Chongqing Municipality, China

    PubMed Central

    He, Zhifei; Cheng, Zhaohui; Fu, Hang; Tang, Shangfeng; Fu, Qian; Fang, Haiqing; Xian, Yue; Ming, Hui; Feng, Zhanchun

    2015-01-01

    Purpose: This study aimed to explore the competencies of public health workers (PHWs) of township hospitals in Chongqing Municipality (China), and determine the related impact factors of the competencies of PHWs; Methods: A cross-sectional research was conducted on 314 PHWs from 27 township hospitals in three districts in Chongqing Municipality (China), from June to August 2014. A self-assessment questionnaire was established on the basis of literature reviews and a competency dictionary. The differences in competencies among the three districts were determined by adopting the chi-square test, t-test, analysis of variance (ANOVA) method, and the impact factors of the competencies of PHWs were determined by adopting stepwise regression analysis. Results: (1) Results of the demographic characteristics of PHWs in three sample districts of Chongqing Municipality showed that a significant difference in age of PHWs (p = 0.021 < 0.05) and the majors of PHWs (p = 0.045 < 0.05); (2) In terms of the self-evaluation competency results of PHWs in township hospitals, seven among the 11 aspects were found to have significant differences in the three districts by the ANOVA test; (3) By adopting the t-test and ANOVA method, results of the relationship between the characteristics of PHWs and their competency scores showed that significant differences were found in the economic level (p = 0.000 < 0.05), age (p = 0.000 < 0.05), years of working (p = 0.000 < 0.05) and title of PHWs (p = 0.000 < 0.05); (4) Stepwise regression analysis was used to determine the impact factors of the competencies of PHWs in township hospitals, including the economic level (p = 0.000 < 0.001), years of working (p = 0.000 < 0.001), title (p = 0.001 < 0.005), and public health major (p = 0.007 < 0.01). Conclusions: The competencies of the township hospital staff in Chongqing Municipality (China), are generally insufficient, therefore, regulating the medical education and training skills of PHWs is crucial to improve the competencies of PHWs in the township hospitals of Chongqing Municipality. The results of this study can be mirrored in other areas of China. PMID:26569273

  14. Factors Associated with the Competencies of Public Health Workers in Township Hospitals: A Cross-Sectional Survey in Chongqing Municipality, China.

    PubMed

    He, Zhifei; Cheng, Zhaohui; Fu, Hang; Tang, Shangfeng; Fu, Qian; Fang, Haiqing; Xian, Yue; Ming, Hui; Feng, Zhanchun

    2015-11-09

    This study aimed to explore the competencies of public health workers (PHWs) of township hospitals in Chongqing Municipality (China), and determine the related impact factors of the competencies of PHWs; A cross-sectional research was conducted on 314 PHWs from 27 township hospitals in three districts in Chongqing Municipality (China), from June to August 2014. A self-assessment questionnaire was established on the basis of literature reviews and a competency dictionary. The differences in competencies among the three districts were determined by adopting the chi-square test, t-test, analysis of variance (ANOVA) method, and the impact factors of the competencies of PHWs were determined by adopting stepwise regression analysis. (1) RESULTS of the demographic characteristics of PHWs in three sample districts of Chongqing Municipality showed that a significant difference in age of PHWs (p = 0.021 < 0.05) and the majors of PHWs (p = 0.045 < 0.05); (2) In terms of the self-evaluation competency results of PHWs in township hospitals, seven among the 11 aspects were found to have significant differences in the three districts by the ANOVA test; (3) By adopting the t-test and ANOVA method, results of the relationship between the characteristics of PHWs and their competency scores showed that significant differences were found in the economic level (p = 0.000 < 0.05), age (p = 0.000 < 0.05), years of working (p = 0.000 < 0.05) and title of PHWs (p = 0.000 < 0.05); (4) Stepwise regression analysis was used to determine the impact factors of the competencies of PHWs in township hospitals, including the economic level (p = 0.000 < 0.001), years of working (p = 0.000 < 0.001), title (p = 0.001 < 0.005), and public health major (p = 0.007 < 0.01). The competencies of the township hospital staff in Chongqing Municipality (China), are generally insufficient, therefore, regulating the medical education and training skills of PHWs is crucial to improve the competencies of PHWs in the township hospitals of Chongqing Municipality. The results of this study can be mirrored in other areas of China.

  15. Learning style-based teaching harvests a superior comprehension of respiratory physiology.

    PubMed

    Anbarasi, M; Rajkumar, G; Krishnakumar, S; Rajendran, P; Venkatesan, R; Dinesh, T; Mohan, J; Venkidusamy, S

    2015-09-01

    Students entering medical college generally show vast diversity in their school education. It becomes the responsibility of teachers to motivate students and meet the needs of all diversities. One such measure is teaching students in their own preferred learning style. The present study was aimed to incorporate a learning style-based teaching-learning program for medical students and to reveal its significance and utility. Learning styles of students were assessed online using the visual-auditory-kinesthetic (VAK) learning style self-assessment questionnaire. When respiratory physiology was taught, students were divided into three groups, namely, visual (n = 34), auditory (n = 44), and kinesthetic (n = 28), based on their learning style. A fourth group (the traditional group; n = 40) was formed by choosing students randomly from the above three groups. Visual, auditory, and kinesthetic groups were taught following the appropriate teaching-learning strategies. The traditional group was taught via the routine didactic lecture method. The effectiveness of this intervention was evaluated by a pretest and two posttests, posttest 1 immediately after the intervention and posttest 2 after a month. In posttest 1, one-way ANOVA showed a significant statistical difference (P=0.005). Post hoc analysis showed significance between the kinesthetic group and traditional group (P=0.002). One-way ANOVA showed a significant difference in posttest 2 scores (P < 0.0001). Post hoc analysis showed significance between the three learning style-based groups compared with the traditional group [visual vs. traditional groups (p=0.002), auditory vs. traditional groups (p=0.03), and Kinesthetic vs. traditional groups (p=0.001)]. This study emphasizes that teaching methods tailored to students' style of learning definitely improve their understanding, performance, and retrieval of the subject. Copyright © 2015 The American Physiological Society.

  16. [Effect of occupational stress on mental health].

    PubMed

    Yu, Shan-fa; Zhang, Rui; Ma, Liang-qing; Gu, Gui-zhen; Yang, Yan; Li, Kui-rong

    2003-02-01

    To study the effect of job psychological demands and job control on mental health and their interaction. 93 male freight train dispatchers were evaluated by using revised Job Demand-Control Scale and 7 strain scales. Stepwise regression analysis, Univariate ANOVA, Kruskal-Wallis H and Modian methods were used in statistic analysis. Kruskal-Wallis H and Modian methods analysis revealed the difference in mental health scores among groups of decision latitude (mean rank 55.57, 47.95, 48.42, 33.50, P < 0.05), the differences in scores of mental health (37.45, 40.01, 58.35), job satisfaction (53.18, 46.91, 32.43), daily life strains (33.00, 44.96, 56.12) and depression (36.45, 42.25, 53.61) among groups of job time demands (P < 0.05) were all statistically significant. ANOVA showed that job time demands and decision latitude had interaction effects on physical complains (R(2) = 0.24), state-anxiety (R(2) = 0.26), and daytime fatigue (R(2) = 0.28) (P < 0.05). Regression analysis revealed a significant job time demands and job decision latitude interaction effect as well as significant main effects of the some independent variables on different job strains (R(2) > 0.05). Job time demands and job decision latitude have direct and interactive effects on psychosomatic health, the more time demands, the more psychological strains, the effect of job time demands is greater than that of job decision latitude.

  17. Efficacy of Miswak toothpaste and mouthwash on cariogenic bacteria

    PubMed Central

    Al-Dabbagh, Samim A.; Qasim, Huda J.; Al-Derzi, Nadia A.

    2016-01-01

    Objectives: To evaluate the efficacy of Salvadora persica (Miswak) products on cariogenic bacteria in comparison with ordinary toothpaste. Methods: The study was conducted in Zakho city, Kurdistan region, Iraq during the period from October 2013 to January 2014. A randomized controlled clinical trial of 40 students randomly allocated into 4 groups. They were instructed to use Mismark toothpaste, Miswak mouthwash, and ordinary toothpaste with water or with normal saline. Salivary samples were collected at 3-time intervals: before, immediately after use, and after 2 weeks of use. The effect of each method on Streptococcus mutans and Lactobacilli was evaluated by using caries risk test. Results: One-way repeated measure analysis of variance (ANOVA), one-way ANOVA, and least significant difference tests were used. Miswak wash has a significant reduction effect on both bacteria immediately and after 2 weeks of use. Miswak paste has a similar effect on Lactobacilli, while Streptococcus mutans showed a significant decrease only after 2 weeks of use. Ordinary paste showed a non significant effect on both bacteria at both time intervals; while the addition of normal saline showed a significant effect on both bacteria only after 2 weeks of use. Conclusion: Miswak products, especially mouth wash, were more effective in reducing the growth of cariogenic bacteria than ordinary toothpaste. PMID:27570858

  18. A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength.

    PubMed

    Song, Minju; Shin, Yooseok; Park, Jeong-Won; Roh, Byoung-Duck

    2015-02-01

    This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil S(3) Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

  19. Evaluating the efficacy of a chemistry video game

    NASA Astrophysics Data System (ADS)

    Shapiro, Marina

    A quasi-experimental design pre-test/post-test intervention study utilizing a within group analysis was conducted with 45 undergraduate college chemistry students that investigated the effect of implementing a game-based learning environment into an undergraduate college chemistry course in order to learn if serious educational games (SEGs) can be used to achieve knowledge gains of complex chemistry concepts and to achieve increase in students' positive attitude toward chemistry. To evaluate if students learn chemistry concepts by participating in a chemistry game-based learning environment, a one-way repeated measures analysis of variance (ANOVA) was conducted across three time points (pre-test, post-test, delayed post-test which were chemistry content exams). Results showed that there was an increase in exam scores over time. The results of the ANOVA indicated a statistically significant time effect. To evaluate if students' attitude towards chemistry increased as a result of participating in a chemistry game-based learning environment a paired samples t-test was conducted using a chemistry attitudinal survey by Mahdi (2014) as the pre- and post-test. Results of the paired-samples t-test indicated that there was no significant difference in pre-attitudinal scores and post-attitudinal scores.

  20. Influence of translucence/opacity and shade in the flexural strength of lithium disilicate ceramics

    PubMed Central

    Santos, Mila Oliveira; do Amaral, Flávia Lucisano Botelho; França, Fabiana Mantovani Gomes; Basting, Roberta Tarkany

    2015-01-01

    Background: Lithium disilicate ceramic system consists of glass ceramic ingots with different grades of translucence which may influence its flexural strength. Aims: To assess the three-point flexural strength of the different lithium disilicate-based ceramic ingots (IPS e.max Press/Ivoclar Vivadent) with different levels of translucence and shade. Materials and Methods: Six groups of ceramic ingots were selected to represent different levels of translucence and shade (HTA1, HTBL2, LTA2, LTB2, MO2, and HO). They measured 25 mm × 5 mm × 2 mm (n = 10), according to ISO 6872 specifications, and tested on a universal test machine (EMIC). Statistical Analysis Used: A one-way analysis of variance (ANOVA) was used (α = 0.05). Results: The results (in MPa) were: HTA1 = 392.98; HTBL2 = 390.74; LTA2 = 390.46; LTB2 = 389.92; MO2 = 390.43; HO = 391.96. ANOVA showed no significant difference among groups (P = 0.1528). Conclusions: Different levels of translucence, opacity and shade of ingots did not affect their mechanical strength, and the use of these ceramics should be guided by the esthetic demands of each clinical situation. PMID:26430304

  1. Factor analysis of the catatonia rating scale and catatonic symptom distribution across four diagnostic groups.

    PubMed

    Krüger, Stephanie; Bagby, R Michael; Höffler, Jürgen; Bräunig, Peter

    2003-01-01

    Catatonia is a frequent psychomotor syndrome, which has received increasing recognition over the last decade. The assessment of the catatonic syndrome requires systematic rating scales that cover the complex spectrum of catatonic motor signs and behaviors. The Catatonia Rating Scale (CRS) is such an instrument, which has been validated and which has undergone extensive reliability testing. In the present study, to further validate the CRS, the items composing this scale were submitted to principal components factor extraction followed by a varimax rotation. An analysis of variance (ANOVA) was performed to assess group differences on the extracted factors in patients with schizophrenia, pure mania, mixed mania, and major depression (N=165). Four factors were extracted, which accounted for 71.5% of the variance. The factors corresponded to the clinical syndromes of (1) catatonic excitement, (2) abnormal involuntary movements/mannerisms, (3) disturbance of volition/catalepsy, and (4) catatonic inhibition. The ANOVA revealed that each of the groups showed a distinctive catatonic symptom pattern and that the overlap between diagnostic groups was minimal. We conclude that this four-factor symptom structure of catatonia challenges the current conceptualization, which proposes only two symptom subtypes.

  2. Fractal Analysis of Radiologists Visual Scanning Pattern in Screening Mammography

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alamudun, Folami T; Yoon, Hong-Jun; Hudson, Kathy

    2015-01-01

    Several investigators have investigated radiologists visual scanning patterns with respect to features such as total time examining a case, time to initially hit true lesions, number of hits, etc. The purpose of this study was to examine the complexity of the radiologists visual scanning pattern when viewing 4-view mammographic cases, as they typically do in clinical practice. Gaze data were collected from 10 readers (3 breast imaging experts and 7 radiology residents) while reviewing 100 screening mammograms (24 normal, 26 benign, 50 malignant). The radiologists scanpaths across the 4 mammographic views were mapped to a single 2-D image plane. Then,more » fractal analysis was applied on the derived scanpaths using the box counting method. For each case, the complexity of each radiologist s scanpath was estimated using fractal dimension. The association between gaze complexity, case pathology, case density, and radiologist experience was evaluated using 3 factor fixed effects ANOVA. ANOVA showed that case pathology, breast density, and experience level are all independent predictors of the visual scanning pattern complexity. Visual scanning patterns are significantly different for benign and malignant cases than for normal cases as well as when breast parenchyma density changes.« less

  3. fMRI of parents of children with Asperger Syndrome: a pilot study.

    PubMed

    Baron-Cohen, Simon; Ring, Howard; Chitnis, Xavier; Wheelwright, Sally; Gregory, Lloyd; Williams, Steve; Brammer, Mick; Bullmore, Ed

    2006-06-01

    People with autism or Asperger Syndrome (AS) show altered patterns of brain activity during visual search and emotion recognition tasks. Autism and AS are genetic conditions and parents may show the 'broader autism phenotype.' (1) To test if parents of children with AS show atypical brain activity during a visual search and an empathy task; (2) to test for sex differences during these tasks at the neural level; (3) to test if parents of children with autism are hyper-masculinized, as might be predicted by the 'extreme male brain' theory. We used fMRI during a visual search task (the Embedded Figures Test (EFT)) and an emotion recognition test (the 'Reading the Mind in the Eyes' (or Eyes) test). Twelve parents of children with AS, vs. 12 sex-matched controls. Factorial analysis was used to map main effects of sex, group (parents vs. controls), and sexxgroup interaction on brain function. An ordinal ANOVA also tested for regions of brain activity where females>males>fathers=mothers, to test for parental hyper-masculinization. RESULTS ON EFT TASK: Female controls showed more activity in extrastriate cortex than male controls, and both mothers and fathers showed even less activity in this area than sex-matched controls. There were no differences in group activation between mothers and fathers of children with AS. The ordinal ANOVA identified two specific regions in visual cortex (right and left, respectively) that showed the pattern Females>Males>Fathers=Mothers, both in BA 19. RESULTS ON EYES TASK: Male controls showed more activity in the left inferior frontal gyrus than female controls, and both mothers and fathers showed even more activity in this area compared to sex-matched controls. Female controls showed greater bilateral inferior frontal activation than males. This was not seen when comparing mothers to males, or mothers to fathers. The ordinal ANOVA identified two specific regions that showed the pattern Females>Males>Mothers=Fathers: left medial temporal gyrus (BA 21) and left dorsolateral prefrontal cortex (BA 44). Parents of children with AS show atypical brain function during both visual search and emotion recognition, in the direction of hyper-masculinization of the brain. Because of the small sample size, and lack of age-matching between parents and controls, such results constitute a pilot study that needs replicating with larger samples.

  4. Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Matsuo, Yukinori, E-mail: ymatsuo@kuhp.kyoto-u.ac.

    Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiplemore » causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.« less

  5. A hybrid anchored-ANOVA - POD/Kriging method for uncertainty quantification in unsteady high-fidelity CFD simulations

    NASA Astrophysics Data System (ADS)

    Margheri, Luca; Sagaut, Pierre

    2016-11-01

    To significantly increase the contribution of numerical computational fluid dynamics (CFD) simulation for risk assessment and decision making, it is important to quantitatively measure the impact of uncertainties to assess the reliability and robustness of the results. As unsteady high-fidelity CFD simulations are becoming the standard for industrial applications, reducing the number of required samples to perform sensitivity (SA) and uncertainty quantification (UQ) analysis is an actual engineering challenge. The novel approach presented in this paper is based on an efficient hybridization between the anchored-ANOVA and the POD/Kriging methods, which have already been used in CFD-UQ realistic applications, and the definition of best practices to achieve global accuracy. The anchored-ANOVA method is used to efficiently reduce the UQ dimension space, while the POD/Kriging is used to smooth and interpolate each anchored-ANOVA term. The main advantages of the proposed method are illustrated through four applications with increasing complexity, most of them based on Large-Eddy Simulation as a high-fidelity CFD tool: the turbulent channel flow, the flow around an isolated bluff-body, a pedestrian wind comfort study in a full scale urban area and an application to toxic gas dispersion in a full scale city area. The proposed c-APK method (anchored-ANOVA-POD/Kriging) inherits the advantages of each key element: interpolation through POD/Kriging precludes the use of quadrature schemes therefore allowing for a more flexible sampling strategy while the ANOVA decomposition allows for a better domain exploration. A comparison of the three methods is given for each application. In addition, the importance of adding flexibility to the control parameters and the choice of the quantity of interest (QoI) are discussed. As a result, global accuracy can be achieved with a reasonable number of samples allowing computationally expensive CFD-UQ analysis.

  6. Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

    NASA Astrophysics Data System (ADS)

    Lin, Lianghua; Liu, Zhiyi; Ying, Puyou; Liu, Meng

    2015-12-01

    Multi-step heat treatment effectively enhances the stress corrosion cracking (SCC) resistance but usually degrades the mechanical properties of Al-Zn-Mg-Cu alloys. With the aim to enhance SCC resistance as well as strength of Al-Zn-Mg-Cu alloys, we have optimized the process parameters during two-step aging of Al-6.1Zn-2.8Mg-1.9Cu alloy by Taguchi's L9 orthogonal array. In this work, analysis of variance (ANOVA) was performed to find out the significant heat treatment parameters. The slow strain rate testing combined with scanning electron microscope and transmission electron microscope was employed to study the SCC behaviors of Al-Zn-Mg-Cu alloy. Results showed that the contour map produced by ANOVA offered a reliable reference for selection of optimum heat treatment parameters. By using this method, a desired combination of mechanical performances and SCC resistance was obtained.

  7. Comparison of soymilk, powdered milk, Hank's balanced salt solution and tap water on periodontal ligament cell survival.

    PubMed

    Moazami, Fariborz; Mirhadi, Hosein; Geramizadeh, Bita; Sahebi, Safoura

    2012-04-01

    The purpose of this study was to evaluate the ability of soymilk, powdered milk, and Hank's balanced salt solution (HBSS) to maintain human periodontal ligament (PDL) cell viability in vitro. PDL cells were obtained from extracted healthy third molars and cultured in Dulbecco's modified Eagles medium (DMEM). The cultures were exposed for 1, 2, 4, and 8 h to experimental solutions (tap water served as negative control and DMEM as positive control) at 37°C. The viable cells were then counted using the trypan blue exclusion technique. Data were analyzed by using one-way anova, post hoc Scheffe and two-way anova test. Statistical analysis showed that HBSS, powdered baby formula, and soymilk maintain cell viability equally well in different periods of times. Tap water cannot keep cells viable as well as other solutions. Soymilk and powdered baby formula can be recommended as suitable storage media for avulsed teeth for up to 8 h. © 2011 John Wiley & Sons A/S.

  8. E-WOM Review Adoption: Consumers’ Demographic Profile Influence on Green Purchase Intention

    NASA Astrophysics Data System (ADS)

    Rahim, Roslin Abdul; Sulaiman, Zuraidah; Chin, Thoo Ai; Arif, Mohd Shoki Mohd; Hamid, Mohd Hakim Abdul

    2017-06-01

    Nowadays, green products are getting popular in their acceptance by the Malaysian consumers. Due to the advancement of the Internet technologies and the wide spread of electronic word of mouth (E-WOM), consumers seem to be more influenced in purchasing the green products. In this study, consumers’ demographic profiles, such as age, gender, income, education background, and occupation are being explored to investigate their influences on consumers’ green product purchase intention. The purpose of this paper is to showcase the results of the differences between several demographic profile groups on green product purchase intention using descriptive analysis, ANOVA and independent sample T-Test. T-test results showed that there is a statistically significant difference between gender on consumers’ green product purchase intention. Meanwhile, the results generated by ANOVA indicated that there are no significant differences between age, income, education background and occupation on consumers’ green product purchase intention. These results shed light on the potential market segment that should be targeted by marketers and producers of green products in Malaysia.

  9. Pharmacological and Behavioral Enhancement of Neuroplasticity in the MPTP Lesioned Mouse and Nonhuman Primate

    DTIC Science & Technology

    2007-05-01

    and post - synaptic dopamine biosynthesis, uptake and receptor expression as well as glutamatergic synapses. This hypothesis will be tested through...0.05) compared to mice at 7 days (9.6 ± 3.2%) or 30 days post -MPTP (16.5 ± 7.3%). The tail suspension test showed a significant increase in percent of...were compared using one-way analysis of variance (ANOVA), followed by the Fisher post hoc test for comparison of multiple means for the following

  10. A Vignette (User's Guide) for “An R Package for Statistical ...

    EPA Pesticide Factsheets

    StatCharrms is a graphical user front-end for ease of use in analyzing data generated from OCSPP 890.2200, Medaka Extended One Generation Reproduction Test (MEOGRT) and OCSPP 890.2300, Larval Amphibian Gonad Development Assay (LAGDA). The analyses StatCharrms is capable of performing are: Rao-Scott adjusted Cochran-Armitage test for trend By Slices (RSCABS), a Standard Cochran-Armitage test for trend By Slices (SCABS), mixed effects Cox proportional model, Jonckheere-Terpstra step down trend test, Dunn test, one way ANOVA, weighted ANOVA, mixed effects ANOVA, repeated measures ANOVA, and Dunnett test. This document provides a User’s Manual (termed a Vignette by the Comprehensive R Archive Network (CRAN)) for the previously created R-code tool called StatCharrms (Statistical analysis of Chemistry, Histopathology, and Reproduction endpoints using Repeated measures and Multi-generation Studies). The StatCharrms R-code has been publically available directly from EPA staff since the approval of OCSPP 890.2200 and 890.2300, and now is available publically available at the CRAN.

  11. Smoothing spline ANOVA frailty model for recurrent event data.

    PubMed

    Du, Pang; Jiang, Yihua; Wang, Yuedong

    2011-12-01

    Gap time hazard estimation is of particular interest in recurrent event data. This article proposes a fully nonparametric approach for estimating the gap time hazard. Smoothing spline analysis of variance (ANOVA) decompositions are used to model the log gap time hazard as a joint function of gap time and covariates, and general frailty is introduced to account for between-subject heterogeneity and within-subject correlation. We estimate the nonparametric gap time hazard function and parameters in the frailty distribution using a combination of the Newton-Raphson procedure, the stochastic approximation algorithm (SAA), and the Markov chain Monte Carlo (MCMC) method. The convergence of the algorithm is guaranteed by decreasing the step size of parameter update and/or increasing the MCMC sample size along iterations. Model selection procedure is also developed to identify negligible components in a functional ANOVA decomposition of the log gap time hazard. We evaluate the proposed methods with simulation studies and illustrate its use through the analysis of bladder tumor data. © 2011, The International Biometric Society.

  12. The overuse of the implant motor: effect on the output torque in overloading condition.

    PubMed

    Lee, Du-Hyeong; Cho, Sung-Am; Lee, Cheong-Hee; Lee, Kyu-Bok

    2015-06-01

    The overloading of the motor affects its performance. The output torque of the implant motor under overloading condition has not been reported. The purpose of this study was to determine the reliability and the tendency of the output torque when an implant motor is consecutively used. Three implant motors were evaluated: SurgicXT/X-SG20L (NSK), INTRAsurg300/CL3-09 (KaVo), and XIP10/CRB26LX (Saeshin). The output torque was measured using an electronic torque gauge fixed with jigs. For the 40 and 50 Ncm torque settings, 300 measurements were taken at 30 rpm. Repeated measures of analysis of variance (ANOVA) and one-way ANOVA were used to compare the torque values within each group and between the groups. As repeating measures, the output torque values decreased gradually compared with the baseline. In within-group analysis, the different torque value from the first measurement appeared earliest in NSK motor, followed in order by Saeshin and KaVo motors. NSK motor showed a different torque decrease between 40 and 50 Ncm settings (p < .05). Intergroup analysis revealed Saeshin motor to have the least deviation from the baseline, followed by KaVo motor. NSK motor had the most inconsistent torque at the 6, 8, 9, and 10 repeat counts (p < .05). The actual torque decreases when the surgical motor is continuously used. The NSK motor showed more significant decreases in torque than KaVo and Saeshin motors in overloading condition. © 2014 Wiley Periodicals, Inc.

  13. Effects of measurement errors on psychometric measurements in ergonomics studies: Implications for correlations, ANOVA, linear regression, factor analysis, and linear discriminant analysis.

    PubMed

    Liu, Yan; Salvendy, Gavriel

    2009-05-01

    This paper aims to demonstrate the effects of measurement errors on psychometric measurements in ergonomics studies. A variety of sources can cause random measurement errors in ergonomics studies and these errors can distort virtually every statistic computed and lead investigators to erroneous conclusions. The effects of measurement errors on five most widely used statistical analysis tools have been discussed and illustrated: correlation; ANOVA; linear regression; factor analysis; linear discriminant analysis. It has been shown that measurement errors can greatly attenuate correlations between variables, reduce statistical power of ANOVA, distort (overestimate, underestimate or even change the sign of) regression coefficients, underrate the explanation contributions of the most important factors in factor analysis and depreciate the significance of discriminant function and discrimination abilities of individual variables in discrimination analysis. The discussions will be restricted to subjective scales and survey methods and their reliability estimates. Other methods applied in ergonomics research, such as physical and electrophysiological measurements and chemical and biomedical analysis methods, also have issues of measurement errors, but they are beyond the scope of this paper. As there has been increasing interest in the development and testing of theories in ergonomics research, it has become very important for ergonomics researchers to understand the effects of measurement errors on their experiment results, which the authors believe is very critical to research progress in theory development and cumulative knowledge in the ergonomics field.

  14. Gloss and Stain Resistance of Ceramic-Polymer CAD/CAM Restorative Blocks.

    PubMed

    Lawson, Nathaniel C; Burgess, John O

    2016-03-01

    To evaluate the gloss and stain resistance of several new ceramic-polymer CAD/CAM blocks Specimens (4 mm) were sectioned from: Enamic (polymer-infused ceramic), LAVA Ultimate (nano-ceramic reinforced polymer), e.max (lithium disilicate), Paradigm C (porcelain), and Paradigm MZ100 (composite). Specimens were wet polished on a polishing wheel to either 320 grit silicon paper (un-polished, N = 8) or 2000 grit silicon carbide papers followed by a 0.05 μm alumina slurry (polished, N = 8). Initial gloss and color (L*a*b*) values were measured. Specimens were stored in a staining solution at 37°C in darkness for 12 days (simulating 1 year). After storage, L*a*b* values re-measured. Change in color was reported as ΔE00 based on the CIEDE2000 formula. Gloss and ΔE00 were analyzed by two-way analysis of variance (ANOVA) (alpha = .05). Separate one-way ANOVA and Tukey post-hoc analyses were performed for both polish conditions and all materials. Two-way ANOVA showed that factors material, polish and their interaction were significant for both gloss and ΔE00 (p < .01). Post-hoc analysis reveals that polished specimens had significantly less color change than un-polished specimens for Paradigm C and LAVA Ultimate. E.max had significantly higher gloss and less color change than all other materials. The composition and polish of CAD/CAM materials affects gloss and stain resistance. Ceramic-polymer hybrid materials can achieve the high gloss required for esthetic restorations. These materials should be polished in order to minimize staining. If polished, all of the tested materials exhibited clinically acceptable color changes at 1 year of simulated staining. (J Esthet Restor Dent 28:S40-S45, 2016). © 2015 Wiley Periodicals, Inc.

  15. Longitudinal analysis of bioaccumulative contaminants in freshwater fishes

    USGS Publications Warehouse

    Sun, Jielun; Kim, Y.; Schmitt, C.J.

    2003-01-01

    The National Contaminant Biomonitoring Program (NCBP) was initiated in 1967 as a component of the National Pesticide Monitoring program. It consists of periodic collection of freshwater fish and other samples and the analysis of the concentrations of persistent environmental contaminants in these samples. For the analysis, the common approach has been to apply the mixed two-way ANOVA model to combined data. A main disadvantage of this method is that it cannot give a detailed temporal trend of the concentrations since the data are grouped. In this paper, we present an alternative approach that performs a longitudinal analysis of the information using random effects models. In the new approach, no grouping is needed and the data are treated as samples from continuous stochastic processes, which seems more appropriate than ANOVA for the problem.

  16. Color alteration, hydrogen peroxide diffusion, and cytotoxicity caused by in-office bleaching protocols.

    PubMed

    de Almeida, Letícia Cunha Amaral Gonzaga; Soares, Diana Gabriela; Gallinari, Marjorie Oliveira; de Souza Costa, Carlos Alberto; Dos Santos, Paulo Henrique; Briso, André Luiz Fraga

    2015-04-01

    This study evaluated the color alteration, cytotoxicity, and hydrogen peroxide (HP) diffusion associated with different in-office bleaching protocols. Bovine enamel/dentin disks were subjected to three bleaching sessions with 35 % HP (three 15-min applications), 35 % HP (one 45-min application), or 20 % HP (one 45-min application). The control group was not bleached. Before bleaching, the disks were adapted to artificial pulp chambers positioned in compartments containing 1 ml of acetate buffer or medium, so that the dentin remained in contact with these substances. Immediately after bleaching, the HP that diffused through the disks was stabilized by acetate buffer and was quantified (two-way repeated measures ANOVA/Fisher's protected least significant difference (PLSD) test; α = 5 %). Cells of mouse dental papilla cell-23 (MDPC-23) were incubated in this culture media for 1 h, followed by analysis of cellular metabolism (methyl tetrazolium assay) (one-way ANOVA/Tukey test; α = 5 %) and morphology (scanning electron microscopy). The specimen color alteration (ΔE) was analyzed by reflection spectrophotometry (two-way repeated measures ANOVA/Fisher's PLSD test; α = 5 %). All protocols showed equal effectiveness at the end of the treatment. HP diffusion was significantly higher in the groups bleached with 35 % HP. Reapplication of 35 % HP resulted in increased diffusion only in the first session; however, the decrease in cell metabolism was similar for all studied protocols. Despite greater peroxide diffusion in the groups treated with 35 % HP, all protocols showed the same effectiveness and were cytotoxic to MDPC-23 cells. Bleaching protocols using high HP concentrations should be avoided because they exert aggressive actions on odontoblast-like cells.

  17. [Analysis of variance of repeated data measured by water maze with SPSS].

    PubMed

    Qiu, Hong; Jin, Guo-qin; Jin, Ru-feng; Zhao, Wei-kang

    2007-01-01

    To introduce the method of analyzing repeated data measured by water maze with SPSS 11.0, and offer a reference statistical method to clinical and basic medicine researchers who take the design of repeated measures. Using repeated measures and multivariate analysis of variance (ANOVA) process of the general linear model in SPSS and giving comparison among different groups and different measure time pairwise. Firstly, Mauchly's test of sphericity should be used to judge whether there were relations among the repeatedly measured data. If any (P

  18. Improved Test Planning and Analysis Through the Use of Advanced Statistical Methods

    NASA Technical Reports Server (NTRS)

    Green, Lawrence L.; Maxwell, Katherine A.; Glass, David E.; Vaughn, Wallace L.; Barger, Weston; Cook, Mylan

    2016-01-01

    The goal of this work is, through computational simulations, to provide statistically-based evidence to convince the testing community that a distributed testing approach is superior to a clustered testing approach for most situations. For clustered testing, numerous, repeated test points are acquired at a limited number of test conditions. For distributed testing, only one or a few test points are requested at many different conditions. The statistical techniques of Analysis of Variance (ANOVA), Design of Experiments (DOE) and Response Surface Methods (RSM) are applied to enable distributed test planning, data analysis and test augmentation. The D-Optimal class of DOE is used to plan an optimally efficient single- and multi-factor test. The resulting simulated test data are analyzed via ANOVA and a parametric model is constructed using RSM. Finally, ANOVA can be used to plan a second round of testing to augment the existing data set with new data points. The use of these techniques is demonstrated through several illustrative examples. To date, many thousands of comparisons have been performed and the results strongly support the conclusion that the distributed testing approach outperforms the clustered testing approach.

  19. Measurement Consistency from Magnetic Resonance Images

    PubMed Central

    Chung, Dongjun; Chung, Moo K.; Durtschi, Reid B.; Lindell, R. Gentry; Vorperian, Houri K.

    2010-01-01

    Rationale and Objectives In quantifying medical images, length-based measurements are still obtained manually. Due to possible human error, a measurement protocol is required to guarantee the consistency of measurements. In this paper, we review various statistical techniques that can be used in determining measurement consistency. The focus is on detecting a possible measurement bias and determining the robustness of the procedures to outliers. Materials and Methods We review correlation analysis, linear regression, Bland-Altman method, paired t-test, and analysis of variance (ANOVA). These techniques were applied to measurements, obtained by two raters, of head and neck structures from magnetic resonance images (MRI). Results The correlation analysis and the linear regression were shown to be insufficient for detecting measurement inconsistency. They are also very sensitive to outliers. The widely used Bland-Altman method is a visualization technique so it lacks the numerical quantification. The paired t-test tends to be sensitive to small measurement bias. On the other hand, ANOVA performs well even under small measurement bias. Conclusion In almost all cases, using only one method is insufficient and it is recommended to use several methods simultaneously. In general, ANOVA performs the best. PMID:18790405

  20. Does Vitamin D Supplementation Enhance Musculoskeletal Performance in Individuals Identified as Vitamin D Deficient through Blood Spot Testing?

    NASA Astrophysics Data System (ADS)

    Murphy, Kellie A.

    This thesis investigated possible changes in performance after one month of vitamin D supplementation in individuals found to be vitamin D deficient or insufficient through blood spot testing. Thirty-two males, ages 18-32, participated. Each subject visited the lab three times in one-month, completing four performance tests each session, including an isometric mid-thigh pull and a vertical jump on a force plate, a isometric 90-degree elbow flexion test using a load cell, and a psychomotor vigilance test on a palm pilot. The initial lab included blood spot tests to find vitamin D levels. In a single blind manner, 16 subjects were assigned vitamin D and 16 the placebo. Repeated measures ANOVA analysis did not reveal any main effects for time (F=2.626, p=0.364), treatment (vitamin D3 vs placebo; F=1.282, p=0.999), or interaction effects for treatment by time (F=0.304, p=0.999) for maximum force production during an isometric mid-thigh pull. Repeated measures ANOVA analysis did not reveal any main effects for time (F=1.323, p=0.999), treatment (vitamin D3 vs placebo; F=0.510, p=0.999), or interaction effects for treatment by time (F= 1.625, p=0.860) for rate of force production during a vertical jump. Repeated measures ANOVA analysis did not reveal any main effects for time (F=0.194, p=0.999), treatment (vitamin D3 vs placebo; F=2.452, p=0.513), or interaction effects for treatment by time (F= 1.179, p=0.999) for maximal force production during a 90-degree isometric elbow flexion. Repeated measures ANOVA analysis did not reveal any main effects for time (F=1.710, p=0.804), treatment (vitamin D3 vs placebo; F=1.471, p=0.94), or interaction effects for treatment by time (F= 0.293, p=0.999) for mean reaction time to random stimuli during the psychomotor vigilance test. Repeated measures ANOVA analysis did not reveal any main effects for time (F=0.530, p=0.999), treatment (vitamin D3 vs placebo; F=0.141, p=0.999), or interaction effects for treatment by time (F=0.784 p=0.999) for incidence of minor lapses during the psychomotor vigilance test.

  1. Associations of age, aerobic fitness, and body mass index with injury in an operational Army brigade.

    PubMed

    Rappole, Catherine; Grier, Tyson; Anderson, Morgan K; Hauschild, Veronique; Jones, Bruce H

    2017-11-01

    To investigate the effects of age, aerobic fitness, and body mass index (BMI) on injury risk in operational Army soldiers. Retrospective cohort study. Male soldiers from an operational Army brigade were administered electronic surveys regarding personal characteristics, physical fitness, and injuries occurring over the last 12 months. Injury risks were stratified by age, 2-mile run time, and BMI. Analyses included descriptive incidence, a Mantel-Haenszel χ 2 test to determine trends, a multivariable logistic regression to determine factors associated with injury, and a one-way analysis of variance (ANOVA). Forty-seventy percent of 1099 respondents reported at least one injury. A linear trend showed that as age, 2-mile run time, and BMI increased, so did injury risk (p<0.01). When controlling for BMI, the most significant independent injury risk factors were older age (odd ratio (OR) 30years-35years/≤24years=1.25, 95%CI: 1.08-2.32), (OR≥36years/≤24years=2.05, 95%CI: 1.36-3.10), and slow run times (OR≥15.9min/≤13.9min=1.91, 95%CI: 1.28-2.85). An ANOVA showed that both run times and BMI increased with age. The stratified analysis and the multivariable logistic regression suggested that older age and poor aerobic fitness are stronger predictors of injury than BMI. Copyright © 2017 Sports Medicine Australia. All rights reserved.

  2. [Use of the reliable change index to evaluate the effectiveness of clinical interventions: Application of an asthma training program].

    PubMed

    Montero, Mikel; Iraurgi, Ioseba; Matellanes, Begoña; Montero, José Manuel

    2015-12-01

    To compare two methods for the evaluation of outcomes to assess effectiveness of a therapeutic intervention of a professional education program on asthma control. A naturalistic, intervention study in which asthmatic patients were attended by clinicians (IG group) who Had taken part in a special education program and a control group (CG) that received medical assistance from clinicians still waiting to be trained. Five urban Primary Care Health Centres of the same region. From an initial sample of 100 patients, 76 formed the final sample for analysis. The study included 37 males and 39 females, aged between 18 and 65 years (M=41.2 years). The two study groups were found to be homogeneous except for the sex variable. Training program for clinical treatment adherence. Peak flow as spirometric index, and structured interview. The results were initially analysed using classical techniques based on robust ANOVA models, and then by calculating the Reliable Change Index (RCI). ANOVA models, conducted separately for each sex, showed no significant differences, due to sample size. RCI methodology showed significant differences in the percentage of patients improved in both groups, as well as clinically relevant changes being observed individually. The RCI method is presented as an attractive alternative as regards the classical methods of analysis that can help in the clinical decision. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

  3. Effectiveness of probiotic, chlorhexidine and fluoride mouthwash against Streptococcus mutans – Randomized, single-blind, in vivo study

    PubMed Central

    Jothika, Mohan; Vanajassun, P. Pranav; Someshwar, Battu

    2015-01-01

    Aim: To determine the short-term efficiency of probiotic, chlorhexidine, and fluoride mouthwashes on plaque Streptococcus mutans level at four periodic intervals. Materials and Methods: This was a single-blind, randomized control study in which each subject was tested with only one mouthwash regimen. Fifty-two healthy qualified adult patients were selected randomly for the study and were divided into the following groups: group 1- 10 ml of distilled water, group 2- 10 ml of 0.2% chlorhexidine mouthwash, group 3- 10 ml of 500 ppm F/400 ml sodium fluoride mouthwash, and group 4- 10 ml of probiotic mouthwash. Plaque samples were collected from the buccal surface of premolars and molars in the maxillary quadrant. Sampling procedure was carried out by a single examiner after 7 days, 14 days, and 30 days, respectively, after the use of the mouthwash. All the samples were subjected to microbiological analysis and statistically analyzed with one-way analysis of variance (ANOVA) and post-hoc test. Results: One-way ANOVA comparison among groups 2, 3, and 4 showed no statistical significance, whereas group 1 showed statistically significant difference when compared with groups 2, 3, and 4 at 7th, 14th, and 30th day. Conclusion: Chlorhexidine, sodium fluoride, and probiotic mouthwashes reduce plaque S. mutans levels. Probiotic mouthwash is effective and equivalent to chlorhexidine and sodium fluoride mouthwashes. Thus, probiotic mouthwash can also be considered as an effective oral hygiene regimen. PMID:25984467

  4. Accuracy of different impression materials in parallel and nonparallel implants

    PubMed Central

    Vojdani, Mahroo; Torabi, Kianoosh; Ansarifard, Elham

    2015-01-01

    Background: A precise impression is mandatory to obtain passive fit in implant-supported prostheses. The aim of this study was to compare the accuracy of three impression materials in both parallel and nonparallel implant positions. Materials and Methods: In this experimental study, two partial dentate maxillary acrylic models with four implant analogues in canines and lateral incisors areas were used. One model was simulating the parallel condition and the other nonparallel one, in which implants were tilted 30° bucally and 20° in either mesial or distal directions. Thirty stone casts were made from each model using polyether (Impregum), additional silicone (Monopren) and vinyl siloxanether (Identium), with open tray technique. The distortion values in three-dimensions (X, Y and Z-axis) were measured by coordinate measuring machine. Two-way analysis of variance (ANOVA), one-way ANOVA and Tukey tests were used for data analysis (α = 0.05). Results: Under parallel condition, all the materials showed comparable, accurate casts (P = 0.74). In the presence of angulated implants, while Monopren showed more accurate results compared to Impregum (P = 0.01), Identium yielded almost similar results to those produced by Impregum (P = 0.27) and Monopren (P = 0.26). Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively. PMID:26288620

  5. Coupled semivariogram uncertainty of hydrogeological and geophysical data on capture zone uncertainty analysis

    USGS Publications Warehouse

    Rahman, A.; Tsai, F.T.-C.; White, C.D.; Willson, C.S.

    2008-01-01

    This study investigates capture zone uncertainty that relates to the coupled semivariogram uncertainty of hydrogeological and geophysical data. Semivariogram uncertainty is represented by the uncertainty in structural parameters (range, sill, and nugget). We used the beta distribution function to derive the prior distributions of structural parameters. The probability distributions of structural parameters were further updated through the Bayesian approach with the Gaussian likelihood functions. Cokriging of noncollocated pumping test data and electrical resistivity data was conducted to better estimate hydraulic conductivity through autosemivariograms and pseudo-cross-semivariogram. Sensitivities of capture zone variability with respect to the spatial variability of hydraulic conductivity, porosity and aquifer thickness were analyzed using ANOVA. The proposed methodology was applied to the analysis of capture zone uncertainty at the Chicot aquifer in Southwestern Louisiana, where a regional groundwater flow model was developed. MODFLOW-MODPATH was adopted to delineate the capture zone. The ANOVA results showed that both capture zone area and compactness were sensitive to hydraulic conductivity variation. We concluded that the capture zone uncertainty due to the semivariogram uncertainty is much higher than that due to the kriging uncertainty for given semivariograms. In other words, the sole use of conditional variances of kriging may greatly underestimate the flow response uncertainty. Semivariogram uncertainty should also be taken into account in the uncertainty analysis. ?? 2008 ASCE.

  6. Reviewing and comparing self-concept in patients undergoing hemodialysis and peritoneal dialysis

    PubMed Central

    Shahgholian, Nahid; Tajdari, Setareh; Nasiri, Mahmoud

    2012-01-01

    Background: Chronic renal disease is a health problem in today’s world. In the end-stages of renal disease patients depend upon alternative therapies including dialysis for their survival. However, dialysis causes several stressors on physical, mental and social performance of patients. The present study aimed to review and compare the self-concept in patients undergoing hemodialysis and peritoneal dialysis. Materials and Methods: This was a case-control study including two groups of patients, undergoing hemodialysis and peritoneal dialysis, who referred to Al-Zahra and Ali Asghar Hospitals, which are affiliated to Isfahan University of Medical Sciences. These groups were compared to the control group. Data were collected through completing the form of demographic characteristics and a questionnaire, written by the researcher, pertaining to the self-concept which was collected by the samples. The data were analyzed by the Software SPSS version 18. Findings: ANOVA (analysis of variance) showed that statistically there was a significant difference between mean score of self-concept in the three physical (body-image), psychological, and social self aspects in the two groups of hemodialysis and peritoneal dialysis with the control group; however, Duncan’s post-hoc analysis showed no significant difference between mean score of self-concept in the three mentioned aspects in the two groups of hemodialysis and peritoneal dialysis. Furthermore, ANOVA (analysis of variance) showed that there was no significant difference between mean score of the spiritual aspect of the self-concept in the two groups of hemodialysis and peritoneal dialysis with the control group. Duncan’s post-hoc analysis also showed no significant difference in this aspect between the two groups of hemodialysis and peritoneal dialysis. Conclusions: Patients undergoing dialysis have many psychological disorders and the type of dialysis is not of much importance in this regard; therefore, adequate education and information for clients in order to use appropriate methods of adaptation as well as appropriate social relationship, continuing social support and developing health policies seem necessary in order to prevent mental disorders and providing required services and supports for patients. PMID:23833607

  7. Optimization of multiple quality characteristics in bone drilling using grey relational analysis

    PubMed Central

    Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

    2014-01-01

    Purpose Drilling of bone is common during bone fracture treatment to fix the fractured parts with screws wires or plates. Minimally invasive drilling of the bone has a great demand as it helps in better fixation and quick healing of the broken bones. The purpose of the present investigation is to determine the optimum cutting condition for the minimization of the temperature, force and surface roughness simultaneously during bone drilling. Method In this study, drilling experiments have been performed on bovine bone with different conditions of feed rate and drill rotational speed using full factorial design. Optimal level of the drilling parameters is determined by the grey relational grade (GRG) obtained from the GRA as the performance index of multiple quality characteristics. The effect of each drilling parameter on GRG is determined using analysis of variance (ANOVA) and the results obtained are validated by confirmation experiment. Results Grey relational analysis showed that the investigation with feed rate of 40 mm/min and spindle speed of 500 rpm has the highest grey relational grade and is recommended setting for minimum temperature, force and surface roughness simultaneously during bone drilling. Feed rate has the highest contribution (59.49%) on the multiple performance characteristics followed by the spindle speed (37.69%) as obtained from ANOVA analysis. Conclusions The use of grey relational analysis will simplify the complex process of optimization of the multi response characteristics in bone drilling by converting them into a single grey relational grade. The use of the above suggested methodology can greatly minimize the bone tissue injury during drilling. PMID:25829751

  8. Optimization of multiple quality characteristics in bone drilling using grey relational analysis.

    PubMed

    Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

    2015-03-01

    Drilling of bone is common during bone fracture treatment to fix the fractured parts with screws wires or plates. Minimally invasive drilling of the bone has a great demand as it helps in better fixation and quick healing of the broken bones. The purpose of the present investigation is to determine the optimum cutting condition for the minimization of the temperature, force and surface roughness simultaneously during bone drilling. In this study, drilling experiments have been performed on bovine bone with different conditions of feed rate and drill rotational speed using full factorial design. Optimal level of the drilling parameters is determined by the grey relational grade (GRG) obtained from the GRA as the performance index of multiple quality characteristics. The effect of each drilling parameter on GRG is determined using analysis of variance (ANOVA) and the results obtained are validated by confirmation experiment. Grey relational analysis showed that the investigation with feed rate of 40 mm/min and spindle speed of 500 rpm has the highest grey relational grade and is recommended setting for minimum temperature, force and surface roughness simultaneously during bone drilling. Feed rate has the highest contribution (59.49%) on the multiple performance characteristics followed by the spindle speed (37.69%) as obtained from ANOVA analysis. The use of grey relational analysis will simplify the complex process of optimization of the multi response characteristics in bone drilling by converting them into a single grey relational grade. The use of the above suggested methodology can greatly minimize the bone tissue injury during drilling.

  9. Daily rhythm of salivary and serum urea concentration in sheep

    PubMed Central

    Piccione, Giuseppe; Foà, Augusto; Bertolucci, Cristiano; Caola, Giovanni

    2006-01-01

    Background In domestic animals many biochemical and physiological processes exhibit daily rhythmicity. The aim of the present study was to investigate the rhythmic pattern of salivary and serum urea concentrations in sheep. Methods Six 3-year-old female sheep kept in the same environmental conditions were used. Sheep were sampled at 4 hour intervals for 48 consecutive hours starting at 08:00 of the first day and finishing at 04:00 of the second day. Blood samples were collected via intravenous cannulae inserted into the jugular vein; saliva samples were collected through a specific tube, the "Salivette". Salivary and serum urea concentrations were assayed by means of UV spectrophotometer. ANOVA was used to determine significant differences. The single Cosinor procedure was applied to the results showing significant differences over time. Results ANOVA showed a significant effect of time on salivary and serum urea concentrations. Serum and salivary urea peaked during the light phase. In the dark phase serum and salivary urea concentrations decreased, and the diurnal trough occurred at midnight. Cosinor analysis showed diurnal acrophases for salivary and serum urea concentrations. Daily mean levels were significantly higher in the serum than in the saliva. Conclusion In sheep both salivary and serum urea concentrations showed daily fluctuations. Urea is synthesized in the liver and its production is strongly influenced by food intake. Future investigation should clarify whether daily urea rhythms in sheep are endogenous or are simply the result of the temporal administration of food. PMID:17123442

  10. Fractal analysis of radiologists' visual scanning pattern in screening mammography

    NASA Astrophysics Data System (ADS)

    Alamudun, Folami T.; Yoon, Hong-Jun; Hudson, Kathy; Morin-Ducote, Garnetta; Tourassi, Georgia

    2015-03-01

    Several researchers have investigated radiologists' visual scanning patterns with respect to features such as total time examining a case, time to initially hit true lesions, number of hits, etc. The purpose of this study was to examine the complexity of the radiologists' visual scanning pattern when viewing 4-view mammographic cases, as they typically do in clinical practice. Gaze data were collected from 10 readers (3 breast imaging experts and 7 radiology residents) while reviewing 100 screening mammograms (24 normal, 26 benign, 50 malignant). The radiologists' scanpaths across the 4 mammographic views were mapped to a single 2-D image plane. Then, fractal analysis was applied on the composite 4- view scanpaths. For each case, the complexity of each radiologist's scanpath was measured using fractal dimension estimated with the box counting method. The association between the fractal dimension of the radiologists' visual scanpath, case pathology, case density, and radiologist experience was evaluated using fixed effects ANOVA. ANOVA showed that the complexity of the radiologists' visual search pattern in screening mammography is dependent on case specific attributes (breast parenchyma density and case pathology) as well as on reader attributes, namely experience level. Visual scanning patterns are significantly different for benign and malignant cases than for normal cases. There is also substantial inter-observer variability which cannot be explained only by experience level.

  11. An evaluation of shear bond strength of self-etch adhesive on pre-etched enamel: an in vitro study.

    PubMed

    Rao, Bhadra; Reddy, Satti Narayana; Mujeeb, Abdul; Mehta, Kanchan; Saritha, G

    2013-11-01

    To determine the shear bond strength of self-etch adhesive G-bond on pre-etched enamel. Thirty caries free human mandibular premolars extracted for orthodontic purpose were used for the study. Occlusal surfaces of all the teeth were flattened with diamond bur and a silicon carbide paper was used for surface smoothening. The thirty samples were randomly grouped into three groups. Three different etch systems were used for the composite build up: group 1 (G-bond self-etch adhesive system), group 2 (G-bond) and group 3 (Adper single bond). Light cured was applied for 10 seconds with a LED unit for composite buildup on the occlusal surface of each tooth with 8 millimeters (mm) in diameter and 3 mm in thickness. The specimens in each group were tested in shear mode using a knife-edge testing apparatus in a universal testing machine across head speed of 1 mm/ minute. Shear bond strength values in Mpa were calculated from the peak load at failure divided by the specimen surface area. The mean shear bond strength of all the groups were calculated and statistical analysis was carried out using one-way Analysis of Variance (ANOVA). The mean bond strength of group 1 is 15.5 Mpa, group 2 is 19.5 Mpa and group 3 is 20.1 Mpa. Statistical analysis was carried out between the groups using one-way ANOVA. Group 1 showed statistically significant lower bond strength when compared to groups 2 and 3. No statistical significant difference between groups 2 and 3 (p < 0.05). Self-etch adhesive G-bond showed increase in shear bond strength on pre-etched enamel.

  12. INNOVATIVE INSTRUMENTATION AND ANALYSIS OF THE TEMPERATURE MEASUREMENT FOR HIGH TEMPERATURE GASIFICATION

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Seong W. Lee

    2004-10-01

    The systematic tests of the gasifier simulator on the clean thermocouple were completed in this reporting period. Within the systematic tests on the clean thermocouple, five (5) factors were considered as the experimental parameters including air flow rate, water flow rate, fine dust particle amount, ammonia addition and high/low frequency device (electric motor). The fractional factorial design method was used in the experiment design with sixteen (16) data sets of readings. Analysis of Variances (ANOVA) was applied to the results from systematic tests. The ANOVA results show that the un-balanced motor vibration frequency did not have the significant impact onmore » the temperature changes in the gasifier simulator. For the fine dust particles testing, the amount of fine dust particles has significant impact to the temperature measurements in the gasifier simulator. The effects of the air and water on the temperature measurements show the same results as reported in the previous report. The ammonia concentration was included as an experimental parameter for the reducing environment in this reporting period. The ammonia concentration does not seem to be a significant factor on the temperature changes. The linear regression analysis was applied to the temperature reading with five (5) factors. The accuracy of the linear regression is relatively low, which is less than 10% accuracy. Nonlinear regression was also conducted to the temperature reading with the same factors. Since the experiments were designed in two (2) levels, the nonlinear regression is not very effective with the dataset (16 readings). An extra central point test was conducted. With the data of the center point testing, the accuracy of the nonlinear regression is much better than the linear regression.« less

  13. Digital versus conventional techniques for pattern fabrication of implant-supported frameworks

    PubMed Central

    Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

    2018-01-01

    Objective: The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Materials and Methods: Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method (n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal–Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. Statistical Analysis Used: One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. Results: The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups (P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group (P < 0.001), while there was no significant difference between the two other groups (P = 0.54). CAD/CAM group required significantly more adjustments (P < 0.001). Conclusions: CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations. PMID:29657528

  14. Recent advances in analysis of differential item functioning in health research using the Rasch model.

    PubMed

    Hagquist, Curt; Andrich, David

    2017-09-19

    Rasch analysis with a focus on Differential Item Functioning (DIF) is increasingly used for examination of psychometric properties of health outcome measures. To take account of DIF in order to retain precision of measurement, split of DIF-items into separate sample specific items has become a frequently used technique. The purpose of the paper is to present and summarise recent advances of analysis of DIF in a unified methodology. In particular, the paper focuses on the use of analysis of variance (ANOVA) as a method to simultaneously detect uniform and non-uniform DIF, the need to distinguish between real and artificial DIF and the trade-off between reliability and validity. An illustrative example from health research is used to demonstrate how DIF, in this case between genders, can be identified, quantified and under specific circumstances accounted for using the Rasch model. Rasch analyses of DIF were conducted of a composite measure of psychosomatic problems using Swedish data from the Health Behaviour in School-aged Children study for grade 9 students collected during the 1985-2014 time periods. The procedures demonstrate how DIF can be identified efficiently by ANOVA of residuals, and how the magnitude of DIF can be quantified and potentially accounted for by resolving items according to identifiable groups and using principles of test equating on the resolved items. The results of the analysis also show that the real DIF in some items does affect person measurement estimates. Firstly, in order to distinguish between real and artificial DIF, the items showing DIF initially should not be resolved simultaneously but sequentially. Secondly, while resolving instead of deleting a DIF item may retain reliability, both options may affect the content validity negatively. Resolving items with DIF is not justified if the source of the DIF is relevant for the content of the variable; then resolving DIF may deteriorate the validity of the instrument. Generally, decisions on resolving items to deal with DIF should also rely on external information.

  15. Unraveling bacterial fingerprints of city subways from microbiome 16S gene profiles.

    PubMed

    Walker, Alejandro R; Grimes, Tyler L; Datta, Somnath; Datta, Susmita

    2018-05-22

    Microbial communities can be location specific, and the abundance of species within locations can influence our ability to determine whether a sample belongs to one city or another. As part of the 2017 CAMDA MetaSUB Inter-City Challenge, next generation sequencing (NGS) data was generated from swipe samples collected from subway stations in Boston, New York City hereafter New York, and Sacramento. DNA was extracted and Illumina sequenced. Sequencing data was provided for all cities as part of 2017 CAMDA contest challenge dataset. Principal component analysis (PCA) showed clear clustering of the samples for the three cities, with a substantial proportion of the variance explained by the first three components. We ran two different classifiers and results were robust for error rate (< 6%) and accuracy (> 95%). The analysis of variance (ANOVA) demonstrated that overall, bacterial composition across the three cities is significantly different. A similar conclusion was reached using a novel bootstrap based test using diversity indices. Last but not least, a co-abundance association network analyses for the taxonomic levels "order", "family", and "genus" found different patterns of bacterial networks for the three cities. Bacterial fingerprint can be useful to predict sample provenance. In this work prediction of provenance reported with over 95% accuracy. Association based network analysis, emphasized similarities between the closest cities sharing common bacterial composition. ANOVA showed different patterns of bacterial amongst cities, and these findings strongly suggest that bacterial signature across multiple cities are different. This work advocates a data analysis pipeline which could be followed in order to get biological insight from this data. However, the biological conclusions from this analysis is just an early indication out of a pilot microbiome data provided to us through CAMDA 2017 challenge and will be subject to change as we get more complete data sets in the near future. This microbiome data can have potential applications in forensics, ecology, and other sciences. This article was reviewed by Klas Udekwu, Alexandra Graf, and Rafal Mostowy.

  16. Reducing Anxiety in the Pediatric Emergency Department: A Comparative Trial

    PubMed Central

    Heilbrunn, Benjamin R.; Wittern, Rachael E.; Lee, Justin B.; Pham, Phung K.; Hamilton, Anita H.; Nager, Alan L.

    2014-01-01

    Background Anxiety among patients in a Pediatric Emergency Department (PED) can be significant but often goes unaddressed. Objective To determine whether exposure to Child Life (CL) or Hospital Clowning (HC) can reduce anxiety in children presenting to a PED. Methods Patients were randomized to CL, HC or control and assessed upon: entry to examination room (T1), prior to physician arrival (T2) and during physician examination (T3), using the modified Yale Preoperative Anxiety Scale (m-YPAS). CL and HC interventions occurred for 5–10 minutes prior to physician entry. Effects were analyzed using mixed ANOVA. Results m-YPAS scores ranged from 23 to 59, with a higher score indicating increased anxiety. Mixed ANOVA on the study sample (n=113) showed a significant interaction between groups (CL, HC, control) and time, p = .02. Further analyses indicated effect of group only at T2 (MCL = 23.8, 95% CI 23.2–24.5; MHC = 25.2, 95% CI 24.2–26.2; Mcontrol = 26.1, 95% CI 24.2–27.9), p = .02. Sub-analysis of patients with T1 m-YPAS score ≥ 28 (n=56) showed a significant interaction between group and time, p = .01. Further analysis showed effect of group only at T2 (MCL = 24.4, 95% CI 23.3–25.6; MHC = 27.0, 95% CI 25.2–28.7; Mcontrol = 29.2, 95% CI 25.6–32.7), p = .003. Conclusion CL services can reduce SA for patients presenting to a PED with heightened anxiety at baseline. This reduction occurred immediately following CL intervention, but was not observed in patients exposed to HC or during physician examination. PMID:25271180

  17. Effects of reward and punishment on task performance, mood and autonomic nervous function, and the interaction with personality.

    PubMed

    Sakuragi, Sokichi; Sugiyama, Yoshiki

    2009-06-01

    The effects of reward and punishment are different, and there are individual differences in sensitivity to reward and punishment. The purpose of this study was to investigate the effects of reward and punishment on task performance, mood, and autonomic nervous function, along with the interaction with personality. Twenty-one healthy female subjects volunteered for the experiment. The task performance was evaluated by required time and total errors while performing a Wisconsin Card Sorting Test. We assessed their personalities using the Minnesota Multiphasic Personality Inventory (MMPI) questionnaire, and mood states by a profile of mood states. Autonomic nervous function was estimated by a spectral analysis of heart rate variability, baroreflex sensitivity, and blood pressure. Repeated measures analysis of variance (ANOVA) revealed significant interaction of condition x time course on mood and autonomic nervous activity, which would indicate a less stressed state under the rewarding condition, but revealed no significant interaction of condition x time course on the task performance. The interactions with personality were further analyzed by repeated measures ANOVA applying the clinical scales of MMPI as independent variables, and significant interactions of condition x time course x Pt (psychasthenia) on task performance, mood, and blood pressure, were revealed. That is, the high Pt group, whose members tend to be sensitive and prone to worry, showed gradual improvement of task performance under the punishing situation with slight increase in systolic blood pressure, while showed no improvement under the rewarding situation with fatigue sense attenuation. In contrast, the low Pt group, whose members tend to be adaptive and self-confident, showed gradual improvement under the rewarding situation. Therefore, we should carefully choose the strategy of reward or punishment, considering the interaction with personality as well as the context in which it is given.

  18. Exploring Omics data from designed experiments using analysis of variance multiblock Orthogonal Partial Least Squares.

    PubMed

    Boccard, Julien; Rudaz, Serge

    2016-05-12

    Many experimental factors may have an impact on chemical or biological systems. A thorough investigation of the potential effects and interactions between the factors is made possible by rationally planning the trials using systematic procedures, i.e. design of experiments. However, assessing factors' influences remains often a challenging task when dealing with hundreds to thousands of correlated variables, whereas only a limited number of samples is available. In that context, most of the existing strategies involve the ANOVA-based partitioning of sources of variation and the separate analysis of ANOVA submatrices using multivariate methods, to account for both the intrinsic characteristics of the data and the study design. However, these approaches lack the ability to summarise the data using a single model and remain somewhat limited for detecting and interpreting subtle perturbations hidden in complex Omics datasets. In the present work, a supervised multiblock algorithm based on the Orthogonal Partial Least Squares (OPLS) framework, is proposed for the joint analysis of ANOVA submatrices. This strategy has several advantages: (i) the evaluation of a unique multiblock model accounting for all sources of variation; (ii) the computation of a robust estimator (goodness of fit) for assessing the ANOVA decomposition reliability; (iii) the investigation of an effect-to-residuals ratio to quickly evaluate the relative importance of each effect and (iv) an easy interpretation of the model with appropriate outputs. Case studies from metabolomics and transcriptomics, highlighting the ability of the method to handle Omics data obtained from fixed-effects full factorial designs, are proposed for illustration purposes. Signal variations are easily related to main effects or interaction terms, while relevant biochemical information can be derived from the models. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Impact of bleaching agents on water sorption and solubility of resin luting cements.

    PubMed

    Torabi Ardakani, Mahshid; Atashkar, Berivan; Bagheri, Rafat; Burrow, Michael F

    2017-08-01

    The aim of the present study was to evaluate the effect of distilled water and home and office bleaching agents on the sorption and solubility of resin luting cements. A total of 18 disc-shaped specimens were prepared from each of four resin cements: G-CEM LinkAce, Panavia F, Rely X Unicem, and seT. Specimens were cured according to the manufacturers' instructions and randomly divided into three groups of six, where they were treated with either an office or home bleaching agent or immersed in distilled water (control). Water sorption and solubility were measured by weighing the specimens before and after immersion and desiccation. Data were analyzed using Pearson correlation coefficient, two-way analysis of variance (ANOVA) and Tukey's test. There was a significant, positive correlation between sorption and solubility. Two-way anova showed significant differences among all resin cements tested for either sorption or solubility. Water sorption and solubility of all cements were affected significantly by office bleaching, and even more by home bleaching agents. Sorption and solubility behavior of the studied cements were highly correlated and significantly affected by applying either office or home bleaching agents; seT showed the highest sorption and solubility, whereas Rely X Unicem revealed the lowest. © 2016 John Wiley & Sons Australia, Ltd.

  20. Absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by Taguchi and ANOVA approaches

    NASA Astrophysics Data System (ADS)

    Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H.; Nassir, Mohamed H.; Al-Amiery, Ahmed A.

    The variation of the results of the mechanical properties of halloysite nanotubes (HNTs) reinforced thermoplastic polyurethane (TPU) at different HNTs loadings was implemented as a tool for analysis. The preparation of HNTs-TPU nanocomposites was performed under four controlled parameters of mixing temperature, mixing speed, mixing time, and HNTs loading at three levels each to satisfy Taguchi method orthogonal array L9 aiming to optimize these parameters for the best measurements of tensile strength, Young's modulus, and tensile strain (known as responses). The maximum variation of the experimental results for each response was determined and analysed based on the optimized results predicted by Taguchi method and ANOVA. It was found that the maximum absolute variations of the three mentioned responses are 69%, 352%, and 126%, respectively. The analysis has shown that the preparation of the optimized tensile strength requires 1 wt.% HNTs loading (excluding 2 wt.% and 3 wt.%), mixing temperature of 190 °C (excluding 200 °C and 210 °C), and mixing speed of 30 rpm (excluding 40 rpm and 50 rpm). In addition, the analysis has determined that the mixing time at 20 min has no effect on the preparation. The mentioned analysis was fortified by ANOVA, images of FESEM, and DSC results. Seemingly, the agglomeration and distribution of HNTs in the nanocomposite play an important role in the process. The outcome of the analysis could be considered as a very important step towards the reliability of Taguchi method.

  1. Organizational and leadership perceptions assessment: opportunities and challenges using the Baldrige companion surveys.

    PubMed

    Colombo, Lisa M; Perla, Rocco J; Carifio, James; Bernhardt, Jean M; Slayton, Val W

    2011-01-01

    Combining the use of employee perception surveys with sound analytical techniques and models is critical to capturing high quality data from which effective decisions can be made in complex healthcare settings. This study used the Baldrige Award companion surveys with an analysis of variance (ANOVA) framework to identify discordant perceptions of hospital staff and leadership in the areas of customer focus, knowledge management, and results that were significant at the 0.05 and 0.01 levels. Senior leaders in the organization found the ANOVA framework helpful as they interpreted results from the Baldrige companion surveys and planned future improvement activities. During the execution of our study a number of difficulties and challenges arose that are not uncommon to survey administration in smaller settings, such as community hospitals, or in larger hospital settings with no research staff or research staff with relevant psychometric expertise. Our experience suggests that the Baldrige companion survey process would be enhanced by providing organizations with general guidance and protocols for optimal survey administration and data analysis. The purpose of this article is to outline the ANOVA model we used with the Baldrige companion surveys and to provide guidance related to the administration and analysis of these companion surveys for those that use them. © 2010 National Association for Healthcare Quality.

  2. Characterization of Spanish honeys with protected designation of origin "Miel de Granada" according to their mineral content.

    PubMed

    de Alda-Garcilope, C; Gallego-Picó, A; Bravo-Yagüe, J C; Garcinuño-Martínez, R M; Fernández-Hernando, P

    2012-12-01

    Honey attributes such as geographical origin or specified botanical sources often command a premium price due to their organoleptic or pharmacoactive properties. "Miel de Granada" is a highly quality product with protected designation of origin (PDO) which includes six monofloral honeys and two multifloral honeys. Our objective was the characterization of "Miel de Granada" according to their metal content. Metal content was specific enough and allowed discrimination from honeys of different botanical and geographical origins and confirmed the authenticity of PDO labelling as Granada product with the determination of only five elements (K, Na, Ca, Mg and Zn). Chemometric techniques as cluster analysis and ANOVA were used to classify honeys according to their botanical and geographical origin in the metal data. Metal content marks the differences in honey samples and can be used as a tool to assess the quality of honeys. ANOVA showed significant differences among rosemary honeys from different geographical areas despite the botanical factor weight. Our research contributes to the groundwork studies to determine the geographical origin of Spanish honeys. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. A Probabilistic Collocation Based Iterative Kalman Filter for Landfill Data Assimilation

    NASA Astrophysics Data System (ADS)

    Qiang, Z.; Zeng, L.; Wu, L.

    2016-12-01

    Due to the strong spatial heterogeneity of landfill, uncertainty is ubiquitous in gas transport process in landfill. To accurately characterize the landfill properties, the ensemble Kalman filter (EnKF) has been employed to assimilate the measurements, e.g., the gas pressure. As a Monte Carlo (MC) based method, the EnKF usually requires a large ensemble size, which poses a high computational cost for large scale problems. In this work, we propose a probabilistic collocation based iterative Kalman filter (PCIKF) to estimate permeability in a liquid-gas coupling model. This method employs polynomial chaos expansion (PCE) to represent and propagate the uncertainties of model parameters and states, and an iterative form of Kalman filter to assimilate the current gas pressure data. To further reduce the computation cost, the functional ANOVA (analysis of variance) decomposition is conducted, and only the first order ANOVA components are remained for PCE. Illustrated with numerical case studies, this proposed method shows significant superiority in computation efficiency compared with the traditional MC based iterative EnKF. The developed method has promising potential in reliable prediction and management of landfill gas production.

  4. Adsorptive removal of aniline by granular activated carbon from aqueous solutions with catechol and resorcinol.

    PubMed

    Suresh, S; Srivastava, V C; Mishrab, I M

    2012-01-01

    In the present paper, the removal of aniline by adsorption process onto granular activated carbon (GAC) is reported from aqueous solutions containing catechol and resorcinol separately. The Taguchi experimental design was applied to study the effect of such parameters as the initial component concentrations (C(0,i)) of two solutes (aniline and catechol or aniline and resorcinol) in the solution, temperature (T), adsorbent dosage (m) and contact time (t). The L27 orthogonal array consisting of five parameters each with three levels was used to determine the total amount of solutes adsorbed on GAC (q(tot), mmol/g) and the signal-to-noise ratio. The analysis of variance (ANOVA) was used to determine the optimum conditions. Under these conditions, the ANOVA shows that m is the most important parameter in the adsorption process. The most favourable levels of process parameters were T = 303 K, m = 10 g/l and t = 660 min for both the systems, qtot values in the confirmation experiments carried out at optimum conditions were 0.73 and 0.95 mmol/g for aniline-catechol and aniline-resorcinol systems, respectively.

  5. GAPD and tubulin are suitable internal controls for qPCR analysis of oral squamous cell carcinoma cell lines.

    PubMed

    Campos, M S; Rodini, C O; Pinto-Júnior, D S; Nunes, F D

    2009-02-01

    The selection of housekeeping genes is critical for gene expression studies. To address this issue, four candidate housekeeping genes, including several commonly used ones, were investigated in oral squamous cell carcinoma cell lines. A simple quantitative RT-PCR approach was employed by comparing relative expression of the four candidate genes within two cancerous cell lines (HN6 and HN31) and one noncancerous cell line (HaCaT) treated or not with EGF and TGF-beta1. Data were analyzed using ANOVA followed by the NormFinder software program. On this basis, stability of the candidate housekeeping genes was ranked and non statistical differences were found using ANOVA test. On the other hand, the NormFinder was able to show that GAPD and TUBB presented the less variable results, representing appropriated housekeeping genes for the samples and conditions analyzed. In conclusion, this study suggests that the GAPD and the TUBB represent adequate normalizers for gene profiling studies in OSCC cell lines, covering, respectively, high and low expression levels genes.

  6. Factors influencing sustainability of communally-managed water facilities in rural areas of Zimbabwe

    NASA Astrophysics Data System (ADS)

    Kativhu, T.; Mazvimavi, D.; Tevera, D.; Nhapi, I.

    2017-08-01

    Sustainability of point water facilities is a major development challenge in many rural settings of developing countries not sparing those in the Sub-Saharan Africa region. This study was done in Zimbabwe to investigate the factors influencing sustainability of rural water supply systems. A total of 399 water points were studied in Nyanga, Chivi and Gwanda districts. Data was collected using a questionnaire, observation checklist and key informant interview guide. Multi-Criteria analysis was used to assess the sustainability of water points and inferential statistical analysis such as Chi square tests and Analysis of Variance (ANOVA) were used to determine if there were significant differences on selected variables across districts and types of lifting devices used in the study area. The thematic approach was used to analyze qualitative data. Results show that most water points were not functional and only 17% across the districts were found to be sustainable. A fusion of social, technical, financial, environmental and institutional factors was found to be influencing sustainability. On technical factors the ANOVA results show that the type of lifting device fitted at a water point significantly influences sustainability (F = 37.4, p < 0.01). Availability of spare parts at community level was found to be determining the downtime period of different lifting devices in the studied wards. Absence of user committees was found to be central in influencing sustainability as water points that did not have user committees were not sustainable and most of them were not functional during the time of the survey. Active participation by communities at the planning stage of water projects was also found to be critical for sustainability although field results showed passive participation by communities at this critical project stage. Financial factors of adequacy of financial contributions and establishment of operation and maintenance funds were also found to be of great importance in sustaining water supply systems. It is recommended that all factors should be considered when assessing sustainability since they are interrelated.

  7. A thermographic study on eyes affected by Age-related Macular Degeneration: Comparison among various forms of the pathology and analysis of risk factors

    NASA Astrophysics Data System (ADS)

    Matteoli, Sara; Finocchio, Lucia; Biagini, Ilaria; Giacomelli, Giovanni; Sodi, Andrea; Corvi, Andrea; Virgili, Gianni; Rizzo, Stanislao

    2016-05-01

    The aims of this study are to investigate (1) the ocular thermographic profiles in eyes affected by Age related Macular Degeneration (AMD) and age-matched controls to detect possible hemodynamic abnormalities that could be involved in the pathogenesis of the disease, (2) whether any risk factors associated with the disease could affect the development of a form of AMD rather than another. Thirty-four eyes with Age-Related Maculopathy (ARM), 41 eyes with dry AMD, 60 eyes affected by wet AMD, and 74 eyes with fibrotic AMD were included in the study. The control group consisted of 48 healthy eyes. Exclusion criteria were represented by any other ocular diseases other than AMD, tear film abnormalities, systemic cardiovascular abnormalities, systemic diseases and a body temperature higher than 37.5 °C. A total of 210 eyes without pupil dilation were investigated by infrared thermography (FLIR A320). The Ocular Surface Temperature (OST) of five ocular areas was calculated by means of an image processing technique from the infrared images. Two-sample t-test, one-way ANOVA test and multivariate analysis were used for statistical analyses. ANOVA analyses showed no significant differences among AMD groups (P-value > 0.05), however, OST in AMD patients was significantly lower than in controls (P-value < 0.0001). Smokers showed higher possibility (P-value = 0.012) of developing wet AMD instead of dry AMD. Infrared thermography may be a helpful, non-invasive and not time-consuming method to be used in the management of patients with this common degenerative maculopathy.

  8. Interactive binocular treatment (I-BiT) for amblyopia: results of a pilot study of 3D shutter glasses system.

    PubMed

    Herbison, N; Cobb, S; Gregson, R; Ash, I; Eastgate, R; Purdy, J; Hepburn, T; MacKeith, D; Foss, A

    2013-09-01

    A computer-based interactive binocular treatment system (I-BiT) for amblyopia has been developed, which utilises commercially available 3D 'shutter glasses'. The purpose of this pilot study was to report the effect of treatment on visual acuity (VA) in children with amblyopia. Thirty minutes of I-BiT treatment was given once weekly for 6 weeks. Treatment sessions consisted of playing a computer game and watching a DVD through the I-BiT system. VA was assessed at baseline, mid-treatment, at the end of treatment, and at 4 weeks post treatment. Standard summary statistics and an exploratory one-way analysis of variance (ANOVA) were performed. Ten patients were enrolled with strabismic, anisometropic, or mixed amblyopia. The mean age was 5.4 years. Nine patients (90%) completed the full course of I-BiT treatment with a mean improvement of 0.18 (SD=0.143). Six out of nine patients (67%) who completed the treatment showed a clinically significant improvement of 0.125 LogMAR units or more at follow-up. The exploratory one-way ANOVA showed an overall effect over time (F=7.95, P=0.01). No adverse effects were reported. This small, uncontrolled study has shown VA gains with 3 hours of I-BiT treatment. Although it is recognised that this pilot study had significant limitations-it was unblinded, uncontrolled, and too small to permit formal statistical analysis-these results suggest that further investigation of I-BiT treatment is worthwhile.

  9. Spatial and temporal trends in water quality in a Mediterranean temporary river impacted by sewage effluents.

    PubMed

    David, Arthur; Tournoud, Marie-George; Perrin, Jean-Louis; Rosain, David; Rodier, Claire; Salles, Christian; Bancon-Montigny, Chrystelle; Picot, Bernadette

    2013-03-01

    This paper analyzes how changes in hydrological conditions can affect the water quality of a temporary river that receives direct inputs of sewage effluents. Data from 12 spatial surveys of the Vène river were examined. Physico-chemical parameters, major ion, and nutrient concentrations were measured. Analyses of variance (ANOVA) and multivariate analyses were performed. ANOVA revealed significant spatial differences for conductivity and major ion but no significant spatial differences for nutrient concentrations even if higher average concentrations were observed at stations located downstream from sewage effluent discharge points. Significant temporal differences were observed among all the parameters. Karstic springs had a marked dilution effect on the direct disposal of sewage effluents. During high-flow periods, nutrient concentrations were high to moderate whereas nutrient concentrations ranged from moderate to bad at stations located downstream from the direct inputs of sewage effluents during low-flow periods. Principal component analysis showed that water quality parameters that explained the water quality of the Vène river were highly dependent on hydrological conditions. Cluster analysis showed that when the karstic springs were flowing, water quality was homogeneous all along the river, whereas when karstic springs were dry, water quality at the monitoring stations was more fragmented. These results underline the importance of considering hydrological conditions when monitoring the water quality of temporary rivers. In view of the pollution observed in the Vène river, "good water chemical status" can probably only be achieved by improving the management of sewage effluents during low-flow periods.

  10. Order-Constrained Reference Priors with Implications for Bayesian Isotonic Regression, Analysis of Covariance and Spatial Models

    NASA Astrophysics Data System (ADS)

    Gong, Maozhen

    Selecting an appropriate prior distribution is a fundamental issue in Bayesian Statistics. In this dissertation, under the framework provided by Berger and Bernardo, I derive the reference priors for several models which include: Analysis of Variance (ANOVA)/Analysis of Covariance (ANCOVA) models with a categorical variable under common ordering constraints, the conditionally autoregressive (CAR) models and the simultaneous autoregressive (SAR) models with a spatial autoregression parameter rho considered. The performances of reference priors for ANOVA/ANCOVA models are evaluated by simulation studies with comparisons to Jeffreys' prior and Least Squares Estimation (LSE). The priors are then illustrated in a Bayesian model of the "Risk of Type 2 Diabetes in New Mexico" data, where the relationship between the type 2 diabetes risk (through Hemoglobin A1c) and different smoking levels is investigated. In both simulation studies and real data set modeling, the reference priors that incorporate internal order information show good performances and can be used as default priors. The reference priors for the CAR and SAR models are also illustrated in the "1999 SAT State Average Verbal Scores" data with a comparison to a Uniform prior distribution. Due to the complexity of the reference priors for both CAR and SAR models, only a portion (12 states in the Midwest) of the original data set is considered. The reference priors can give a different marginal posterior distribution compared to a Uniform prior, which provides an alternative for prior specifications for areal data in Spatial statistics.

  11. Smoothing Spline ANOVA Decomposition of Arbitrary Splines: An Application to Eye Movements in Reading

    PubMed Central

    Matuschek, Hannes; Kliegl, Reinhold; Holschneider, Matthias

    2015-01-01

    The Smoothing Spline ANOVA (SS-ANOVA) requires a specialized construction of basis and penalty terms in order to incorporate prior knowledge about the data to be fitted. Typically, one resorts to the most general approach using tensor product splines. This implies severe constraints on the correlation structure, i.e. the assumption of isotropy of smoothness can not be incorporated in general. This may increase the variance of the spline fit, especially if only a relatively small set of observations are given. In this article, we propose an alternative method that allows to incorporate prior knowledge without the need to construct specialized bases and penalties, allowing the researcher to choose the spline basis and penalty according to the prior knowledge of the observations rather than choosing them according to the analysis to be done. The two approaches are compared with an artificial example and with analyses of fixation durations during reading. PMID:25816246

  12. ANALYSES OF NEUROBEHAVIORAL SCREENING DATA: BENCHMARK DOSE ESTIMATION.

    EPA Science Inventory

    Analysis of neurotoxicological screening data such as those of the functional observational battery (FOB) traditionally relies on analysis of variance (ANOVA) with repeated measurements, followed by determination of a no-adverse-effect level (NOAEL). The US EPA has proposed the ...

  13. Frontal brain activation in premature infants' response to auditory stimuli in neonatal intensive care unit.

    PubMed

    Saito, Yuri; Fukuhara, Rie; Aoyama, Shiori; Toshima, Tamotsu

    2009-07-01

    The present study was focusing on the very few contacts with the mother's voice that NICU infants have in the womb as well as after birth, we examined whether they can discriminate between their mothers' utterances and those of female nurses in terms of the emotional bonding that is facilitated by prosodic utterances. Twenty-six premature infants were included in this study, and their cerebral blood flows were measured by near-infrared spectroscopy. They were exposed to auditory stimuli in the form of utterances made by their mothers and female nurses. A two (stimulus: mother and nurse) x two (recording site: right frontal area and left frontal area) analysis of variance (ANOVA) for these relative oxy-Hb values was conducted. The ANOVA showed a significant interaction between stimulus and recording site. The mother's and the nurse's voices were activated in the same way in the left frontal area, but showed different reactions in the right frontal area. We presume that the nurse's voice might become associated with pain and stress for premature infants. Our results showed that the premature infants reacted differently to the different voice stimuli. Therefore, we presume that both mothers' and nurses' voices represent positive stimuli for premature infants because both activate the frontal brain. Accordingly, we cannot explain our results only in terms of the state-dependent marker for infantile individual differences, but must also address the stressful trigger of nurses' voices for NICU infants.

  14. A procedure to evaluate the efficiency of surface sterilization methods in culture-independent fungal endophyte studies.

    PubMed

    Burgdorf, R J; Laing, M D; Morris, C D; Jamal-Ally, S F

    2014-01-01

    Extraneous DNA interferes with PCR studies of endophytic fungi. A procedure was developed with which to evaluate the removal of extraneous DNA. Wheat (Triticum aestivum) leaves were sprayed with Saccharomyces cerevisiae and then subjected to physical and chemical surface treatments. The fungal ITS1 products were amplified from whole tissue DNA extractions. ANOVA was performed on the DNA bands representing S. cerevisiae on the agarose gel. Band profile comparisons using permutational multivariate ANOVA (PERMANOVA) and non-metric multidimensional scaling (NMDS) were performed on DGGE gel data, and band numbers were compared between treatments. Leaf surfaces were viewed under variable pressure scanning electron microscopy (VPSEM). Yeast band analysis of the agarose gel showed that there was no significant difference in the mean band DNA quantity after physical and chemical treatments, but they both differed significantly (p < 0.05) from the untreated control. PERMANOVA revealed a significant difference between all treatments (p < 0.05). The mean similarity matrix showed that the physical treatment results were more reproducible than those from the chemical treatment results. The NMDS showed that the physical treatment was the most consistent. VPSEM indicated that the physical treatment was the most effective treatment to remove surface microbes and debris. The use of molecular and microscopy methods for the post-treatment detection of yeast inoculated onto wheat leaf surfaces demonstrated the effectiveness of the surface treatment employed, and this can assist researchers in optimizing their surface sterilization techniques in DNA-based fungal endophyte studies.

  15. A procedure to evaluate the efficiency of surface sterilization methods in culture-independent fungal endophyte studies

    PubMed Central

    Burgdorf, R.J.; Laing, M.D.; Morris, C.D.; Jamal-Ally, S.F.

    2014-01-01

    Extraneous DNA interferes with PCR studies of endophytic fungi. A procedure was developed with which to evaluate the removal of extraneous DNA. Wheat (Triticum aestivum) leaves were sprayed with Saccharomyces cerevisiae and then subjected to physical and chemical surface treatments. The fungal ITS1 products were amplified from whole tissue DNA extractions. ANOVA was performed on the DNA bands representing S. cerevisiae on the agarose gel. Band profile comparisons using permutational multivariate ANOVA (PERMANOVA) and non-metric multidimensional scaling (NMDS) were performed on DGGE gel data, and band numbers were compared between treatments. Leaf surfaces were viewed under variable pressure scanning electron microscopy (VPSEM). Yeast band analysis of the agarose gel showed that there was no significant difference in the mean band DNA quantity after physical and chemical treatments, but they both differed significantly (p < 0.05) from the untreated control. PERMANOVA revealed a significant difference between all treatments (p < 0.05). The mean similarity matrix showed that the physical treatment results were more reproducible than those from the chemical treatment results. The NMDS showed that the physical treatment was the most consistent. VPSEM indicated that the physical treatment was the most effective treatment to remove surface microbes and debris. The use of molecular and microscopy methods for the post-treatment detection of yeast inoculated onto wheat leaf surfaces demonstrated the effectiveness of the surface treatment employed, and this can assist researchers in optimizing their surface sterilization techniques in DNA-based fungal endophyte studies. PMID:25477934

  16. Healthy Eating Habits among the Population of Serbia: Gender and Age Differences

    PubMed Central

    2015-01-01

    ABSTRACT The purpose of the study is to examine healthy eating habits of the population of Serbia through three dimensions: knowledge, problems, and feelings as well as to determine whether there are any differences between genders and among different age-groups. The research instrument was an Eating Habits Questionnaire (EHQ) which consisted of 35 items. There were 382 respondents involved in the study. The reliability and factor structure of the questionnaire were verified by using factor analysis. The results of MANOVA showed that there is a significant difference in the habits concerning healthy eating between men and women [F (3,378)=4.26, p=0.006; Wilks’ Lambda=0.97]. When the results for the dependent variables (knowledge, problems, and feelings) were considered separately, it was determined that there is no significant difference between men and women, which confirms the results of the t-test. The effect of age on the three dimensions of healthy eating habits was examined within three age-groups, by using ANOVA. The results showed that knowledge about healthy eating increases with age [F (2,379)=6.14, p=0.002] as well as positive feelings which occur as a result of healthy eating [F (2,379)=3.66, p=0.027]. Unlike ANOVA, MANOVA showed difference among the age-groups only when it came to the ‘knowledge’ variable. This study is important as it shows the current state of awareness on healthy eating habits in the researched populace and may be the basis for further research in this field in Serbia. PMID:25995724

  17. Healthy eating habits among the population of Serbia: gender and age differences.

    PubMed

    Jovičić, Ana Đ

    2015-03-01

    The purpose of the study is to examine healthy eating habits of the population of Serbia through three dimensions: knowledge, problems, and feelings as well as to determine whether there are any differences between genders and among different age-groups. The research instrument was an Eating Habits Questionnaire (EHQ) which consisted of 35 items. There were 382 respondents involved in the study. The reliability and factor structure of the questionnaire were verified by using factor analysis. The results of MANOVA showed that there is a significant difference in the habits concerning healthy eating between men and women [F (3,378)=4.26, p=0.006; Wilks' Lambda=0.97]. When the results for the dependent variables (knowledge, problems, and feelings) were considered separately, it was determined that there is no significant difference between men and women, which confirms the results of the t-test. The effect of age on the three dimensions of healthy eating habits was examined within three age-groups, by using ANOVA. The results showed that knowledge about healthy eating increases with age [F (2,379)=6.14, p=0.002] as well as positive feelings which occur as a result of healthy eating [F (2,379)=3.66, p=0.027]. Unlike ANOVA, MANOVA showed difference among the age-groups only when it came to the 'knowledge' variable. This study is important as it shows the current state of awareness on healthy eating habits in the researched populace and may be the basis for further research in this field in Serbia.

  18. Computer-aided liver volumetry: performance of a fully-automated, prototype post-processing solution for whole-organ and lobar segmentation based on MDCT imaging.

    PubMed

    Fananapazir, Ghaneh; Bashir, Mustafa R; Marin, Daniele; Boll, Daniel T

    2015-06-01

    To evaluate the performance of a prototype, fully-automated post-processing solution for whole-liver and lobar segmentation based on MDCT datasets. A polymer liver phantom was used to assess accuracy of post-processing applications comparing phantom volumes determined via Archimedes' principle with MDCT segmented datasets. For the IRB-approved, HIPAA-compliant study, 25 patients were enrolled. Volumetry performance compared the manual approach with the automated prototype, assessing intraobserver variability, and interclass correlation for whole-organ and lobar segmentation using ANOVA comparison. Fidelity of segmentation was evaluated qualitatively. Phantom volume was 1581.0 ± 44.7 mL, manually segmented datasets estimated 1628.0 ± 47.8 mL, representing a mean overestimation of 3.0%, automatically segmented datasets estimated 1601.9 ± 0 mL, representing a mean overestimation of 1.3%. Whole-liver and segmental volumetry demonstrated no significant intraobserver variability for neither manual nor automated measurements. For whole-liver volumetry, automated measurement repetitions resulted in identical values; reproducible whole-organ volumetry was also achieved with manual segmentation, p(ANOVA) 0.98. For lobar volumetry, automated segmentation improved reproducibility over manual approach, without significant measurement differences for either methodology, p(ANOVA) 0.95-0.99. Whole-organ and lobar segmentation results from manual and automated segmentation showed no significant differences, p(ANOVA) 0.96-1.00. Assessment of segmentation fidelity found that segments I-IV/VI showed greater segmentation inaccuracies compared to the remaining right hepatic lobe segments. Automated whole-liver segmentation showed non-inferiority of fully-automated whole-liver segmentation compared to manual approaches with improved reproducibility and post-processing duration; automated dual-seed lobar segmentation showed slight tendencies for underestimating the right hepatic lobe volume and greater variability in edge detection for the left hepatic lobe compared to manual segmentation.

  19. Estimation of low back moments from video analysis: a validation study.

    PubMed

    Coenen, Pieter; Kingma, Idsart; Boot, Cécile R L; Faber, Gert S; Xu, Xu; Bongers, Paulien M; van Dieën, Jaap H

    2011-09-02

    This study aimed to develop, compare and validate two versions of a video analysis method for assessment of low back moments during occupational lifting tasks since for epidemiological studies and ergonomic practice relatively cheap and easily applicable methods to assess low back loads are needed. Ten healthy subjects participated in a protocol comprising 12 lifting conditions. Low back moments were assessed using two variants of a video analysis method and a lab-based reference method. Repeated measures ANOVAs showed no overall differences in peak moments between the two versions of the video analysis method and the reference method. However, two conditions showed a minor overestimation of one of the video analysis method moments. Standard deviations were considerable suggesting that errors in the video analysis were random. Furthermore, there was a small underestimation of dynamic components and overestimation of the static components of the moments. Intraclass correlations coefficients for peak moments showed high correspondence (>0.85) of the video analyses with the reference method. It is concluded that, when a sufficient number of measurements can be taken, the video analysis method for assessment of low back loads during lifting tasks provides valid estimates of low back moments in ergonomic practice and epidemiological studies for lifts up to a moderate level of asymmetry. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Experiential Collaborative Learning and Preferential Thinking

    NASA Astrophysics Data System (ADS)

    Volpentesta, Antonio P.; Ammirato, Salvatore; Sofo, Francesco

    The paper presents a Project-Based Learning (shortly, PBL) approach in a collaborative educational environment aimed to develop design ability and creativity of students coming from different engineering disciplines. Three collaborative learning experiences in product design were conducted in order to study their impact on preferred thinking styles of students. Using a thinking style inventory, pre- and post-survey data was collected and successively analyzed through ANOVA techniques. Statistically significant results showed students successfully developed empathy and an openness to multiple perspectives. Furthermore, data analysis confirms that the proposed collaborative learning experience positively contributes to increase awareness in students' thinking styles.

  1. Race, Socioeconomic Status, and Implicit Bias: Implications for Closing the Achievement Gap

    NASA Astrophysics Data System (ADS)

    Schlosser, Elizabeth Auretta Cox

    This study accessed the relationship between race, socioeconomic status, age and the race implicit bias held by middle and high school science teachers in Mobile and Baldwin County Public School Systems. Seventy-nine participants were administered the race Implicit Association Test (race IAT), created by Greenwald, A. G., Nosek, B. A., & Banaji, M. R., (2003) and a demographic survey. Quantitative analysis using analysis of variances, ANOVA and t-tests were used in this study. An ANOVA was performed comparing the race IAT scores of African American science teachers and their Caucasian counterparts. A statically significant difference was found (F = .4.56, p = .01). An ANOVA was also performed using the race IAT scores comparing the age of the participants; the analysis yielded no statistical difference based on age. A t-test was performed comparing the race IAT scores of African American teachers who taught at either Title I or non-Title I schools; no statistical difference was found between groups (t = -17.985, p < .001). A t-test was also performed comparing the race IAT scores of Caucasian teachers who taught at either Title I or non-Title I schools; a statistically significant difference was found between groups ( t = 2.44, p > .001). This research examines the implications of the achievement gap among African American and Caucasian students in science.

  2. Untargeted Identification of Wood Type-Specific Markers in Particulate Matter from Wood Combustion.

    PubMed

    Weggler, Benedikt A; Ly-Verdu, Saray; Jennerwein, Maximilian; Sippula, Olli; Reda, Ahmed A; Orasche, Jürgen; Gröger, Thomas; Jokiniemi, Jorma; Zimmermann, Ralf

    2016-09-20

    Residential wood combustion emissions are one of the major global sources of particulate and gaseous organic pollutants. However, the detailed chemical compositions of these emissions are poorly characterized due to their highly complex molecular compositions, nonideal combustion conditions, and sample preparation steps. In this study, the particulate organic emissions from a masonry heater using three types of wood logs, namely, beech, birch, and spruce, were chemically characterized using thermal desorption in situ derivatization coupled to a GCxGC-ToF/MS system. Untargeted data analyses were performed using the comprehensive measurements. Univariate and multivariate chemometric tools, such as analysis of variance (ANOVA), principal component analysis (PCA), and ANOVA simultaneous component analysis (ASCA), were used to reduce the data to highly significant and wood type-specific features. This study reveals substances not previously considered in the literature as meaningful markers for differentiation among wood types.

  3. Flow Injection Mass Spectral Fingerprints Demonstrate Chemical Differences in Rio Red Grapefruit with Respect to Year, Harvest Time, and Conventional versus Organic Farming

    PubMed Central

    Chen, Pei; Harnly, James M.; Lester, Gene E.

    2013-01-01

    Spectral fingerprints were acquired for Rio Red grapefruit using flow injection electrospray ionization with ion trap and time-of-flight mass spectrometry (FI-ESI-IT-MS and FI-ESI-TOF-MS). Rio Red grapefruits were harvested 3 times a year (early, mid, and late harvests) in 2005 and 2006 from conventionally and organically grown trees. Data analysis using analysis of variance principal component analysis (ANOVA-PCA) demonstrated that, for both MS systems, the chemical patterns were different as a function of farming mode (conventional vs organic), as well as growing year and time of harvest. This was visually obvious with PCA and was shown to be statistically significant using ANOVA. The spectral fingerprints provided a more inclusive view of the chemical composition of the grapefruit and extended previous conclusions regarding the chemical differences between conventionally and organically grown Rio Red grapefruit. PMID:20337420

  4. FT-Raman spectroscopy, µ-EDXRF spectrometry, and microhardness analysis of the dentin of primary and permanent teeth.

    PubMed

    Torres, Carolina Paes; Miranda Gomes-Silva, Jaciara; Menezes-Oliveira, Maria Angélica Hueb; Silva Soares, Luís Eduardo; Palma-Dibb, Regina Guenka; Borsatto, Maria Cristina

    2018-05-01

    The chemical compositions (organic and inorganic contents) and mechanical behaviors of the dentin of permanent and deciduous teeth were analyzed and compared using X-ray fluorescence spectrometry (µ-EDXRF) Fourier transform Raman spectroscopy (FT-Raman) and a microhardness test (HD). Healthy fresh human primary and permanent molars (n = 10) were selected, The buccal surfaces facing upwards were stabilized in an acrylic plate, flattened, polished, and submitted to the µ-EDXRF, FT-Raman, and HD analysis. The results of the analysis were subjected to ANOVAs and Mann-Whitney U/Student's t multiple comparisons tests. The data showed similar values for the dentin of the primary and permanent teeth in P content, organic content (amide I peak), inorganic content ( PO43- - 430 and 590), and microhardness, Nevertheless, Ca content and Ca/P weight ratio were higher, and the CO32- peak was lower in the dentin of the permanent teeth compared to primary teeth. It be concluded that despite permanent teeth showed more Ca element, both substrates showed similar behavior of chemical and physical properties. © 2018 Wiley Periodicals, Inc.

  5. In vitro rapid intraoral adjustment of porcelain prostheses using a high-speed dental handpiece.

    PubMed

    Song, Xiao-Fei; Yin, Ling; Han, Yi-Gang; Wang, Hui

    2008-03-01

    In vitro rapid intraoral adjustment of porcelain prostheses was conducted using a high-speed dental handpiece and diamond bur. The adjustment process was characterized by measurement of removal forces and energy, with scanning electron microscopic (SEM) observation of porcelain debris, surfaces and subsurface damage produced as a function of operational feed rate. Finite element analysis (FEA) was applied to evaluate subsurface stress distributions and degrees of subsurface damage. The results show that an increase in feed rate resulted in increases in both tangential and normal forces (analysis of variance (ANOVA), P<0.01). When the feed rate approached the highest rate of 60mm min(-1) at a fixed depth of cut of 100microm, the tangential force was nearly seven times that at the lowest feed rate of 15mm min(-1). Consequently, the specific removal energy increased significantly (ANOVA, P<0.01), and the maximum depth of subsurface damage obtained was approximately 110 and 120microm at the highest feed rate of 60mm min(-1) using SEM and FEA, respectively. The topographies of both the adjusted porcelain surfaces and the debris demonstrate microscopically that porcelain was removed via brittle fracture and plastic deformation. Clinicians must be cautious when pursuing rapid dental adjustments, because high operational energy, larger forces and severe surface and subsurface damage can be induced.

  6. Optimization of digestion parameters for analysing the total sulphur of mine tailings by inductively coupled plasma optical emission spectrometry.

    PubMed

    Alam, Raquibul; Shang, Julie Q; Cheng, Xiangrong

    2012-05-01

    The oxidation of sulphidic mine tailings and consequent acid generation poses challenges for the environment. Accurate and precise analysis of sulphur content is necessary for impact assessment and management of mine tailings. Here, the authors aim at developing a rapid and easy digestion procedure, which may analyse and measure the total amount of sulphur in mine tailings by using inductively coupled plasma. For evaluating effects of several variables, the researchers used a univariate (analysis of variance (ANOVA)) strategy and considered factors such as composition of the acid mixture, heating time, and refluxing device to optimize the performance. To do the experiment, the researchers have used two certified reference materials (KZK-1 and RTS-2) and samples of tailings from Musselwhite mine. ANOVA result shows that heating time is the most influencing factor on acid digestion of the reference materials whereas in case of a digestion of tailings sample, hydrochloric acid proved to be the most significant parameter. Satisfactory results between the measured and referenced values are found for all experiments. It is found that the aqua regia (1 ml HNO(3) + 3 ml HCl) digestion of 0.1 g of samples after only 40 min of heating at 95°C produced fast, safe, and accurate analytical results with a recovery of 97% for the selected reference materials.

  7. A study of tensile test on open-cell aluminum foam sandwich

    NASA Astrophysics Data System (ADS)

    Ibrahim, N. A.; Hazza, M. H. F. Al; Adesta, E. Y. T.; Abdullah Sidek, Atiah Bt.; Endut, N. A.

    2018-01-01

    Aluminum foam sandwich (AFS) panels are one of the growing materials in the various industries because of its lightweight behavior. AFS also known for having excellent stiffness to weight ratio and high-energy absorption. Due to their advantages, many researchers’ shows an interest in aluminum foam material for expanding the use of foam structure. However, there is still a gap need to be fill in order to develop reliable data on mechanical behavior of AFS with different parameters and analysis method approach. Least of researcher focusing on open-cell aluminum foam and statistical analysis. Thus, this research conducted by using open-cell aluminum foam core grade 6101 with aluminum sheets skin tested under tension. The data is analyzed using full factorial in JMP statistical analysis software (version 11). ANOVA result show a significant value of the model which less than 0.500. While scatter diagram and 3D plot surface profiler found that skins thickness gives a significant impact to stress/strain value compared to core thickness.

  8. Blood lead levels and risk factors in pregnant women from Durango, Mexico.

    PubMed

    La-Llave-León, Osmel; Estrada-Martínez, Sergio; Manuel Salas-Pacheco, José; Peña-Elósegui, Rocío; Duarte-Sustaita, Jaime; Candelas Rangel, Jorge-Luís; García Vargas, Gonzalo

    2011-01-01

    In this cross-sectional study the authors determined blood lead levels (BLLs) and some risk factors for lead exposure in pregnant women. Two hundred ninety-nine pregnant women receiving medical attention by the Secretary of Health, State of Durango, Mexico, participated in this study between 2007 and 2008. BLLs were evaluated with graphite furnace atomic absorption spectrometry. The authors used Student t test, 1-way analysis of variance (ANOVA), and linear regression as statistical treatments. BLLs ranged from 0.36 to 23.6 μg/dL (mean = 2.79 μg/dL, standard deviation = 2.14). Multivariate analysis showed that the main predictors of BLLs were working in a place where lead is used, using lead glazed pottery, and eating soil.

  9. Effect of clearfil protect bond and transbond plus self-etch primer on shear bond strength of orthodontic brackets

    PubMed Central

    Raji, S. Hamid; Ghorbanipour, Reza; Majdzade, Fateme

    2011-01-01

    Background: The aim of this study was to evaluate the shear bond strength of an antimicrobial and fluoride-releasing self-etch primer (clearfil protect bond) and compare it with transbond plus self-etch primer and conventional acid etching and priming system. Materials and Methods: Forty-eight extracted human premolars were divided randomly to three groups. In group 1, the teeth were bonded with conventional acid etching and priming method. In group 2, the teeth were bonded with clearfil protect bond self-etch primer, and transbond plus self-etch primer was used to bond the teeth in group 3. The samples were stored in 37°C distilled water and thermocycled. Then, the SBS of the sample was evaluated with Zwick testing machine. Descriptive statistics and the analysis of variances (ANOVA) and Tukey's test and Kruskal-Wallis were used to analyze the data. Results: The results of the ANOVA showed that the mean of group 3 was significantly lower than that of other groups. Most of the sample showed a pattern of failure within the adhesive resin. Conclusion: The shear bond strength of clearfil protect bond and transbond plus self-etch primer was enough for bonding the orthodontic brackets. The mode of failure of bonded brackets with these two self-etch primers is safe for enamel. PMID:23372605

  10. Soil nutrients losses by wind erosion in a citrus crop at southeast Spain

    NASA Astrophysics Data System (ADS)

    Segovia, C.; Gómez, J. D.; Gallardo, P.; Lozano, F. J.; Asensio, C.

    2017-06-01

    The purpose of this study was to analyze the influence of wind erosion on the productivity of citric crops over gypsiric Fluvisols in Gador area (Almeria, SE Spain) by blowing air through a wind tunnel. Wind erosion varies considerably depending on time since the last tillage. This is because a physical crust forms after tilling which protects the soil from wind. Crust formation in the study area is strongly favored by dew, which causes them to form in around a week. The repeated measurements ANOVA, as a nonparametric alternative to the ANOVA, using the Geiiser method and the Friedman test shows significant differences ( P ≤ 0.05) in the fractions of very fine sand and coarse silt, which confirmed that very fine sand and coarse silt are the fractions most susceptible to loss from wind. The same statistical analysis for fertility showed smaller differences in organic carbon and K2O content, while N and P2O5 increased. Nutrients lost from wind imply an additional fertilization cost for a crop to be economically feasible. The cost of this restoration of nutrients lost from the soil because of wind erosion was based on experimental data taken in crusted soil and immediately after tilling. Losses in organic matter (O.M.), N, P2O5 and K2O were estimated based on the cost of fertilizers most commonly used in the area.

  11. Uncertainty Analysis of Historical Hurricane Data

    NASA Technical Reports Server (NTRS)

    Green, Lawrence L.

    2007-01-01

    An analysis of variance (ANOVA) study was conducted for historical hurricane data dating back to 1851 that was obtained from the U. S. Department of Commerce National Oceanic and Atmospheric Administration (NOAA). The data set was chosen because it is a large, publicly available collection of information, exhibiting great variability which has made the forecasting of future states, from current and previous states, difficult. The availability of substantial, high-fidelity validation data, however, made for an excellent uncertainty assessment study. Several factors (independent variables) were identified from the data set, which could potentially influence the track and intensity of the storms. The values of these factors, along with the values of responses of interest (dependent variables) were extracted from the data base, and provided to a commercial software package for processing via the ANOVA technique. The primary goal of the study was to document the ANOVA modeling uncertainty and predictive errors in making predictions about hurricane location and intensity 24 to 120 hours beyond known conditions, as reported by the data set. A secondary goal was to expose the ANOVA technique to a broader community within NASA. The independent factors considered to have an influence on the hurricane track included the current and starting longitudes and latitudes (measured in degrees), and current and starting maximum sustained wind speeds (measured in knots), and the storm starting date, its current duration from its first appearance, and the current year fraction of each reading, all measured in years. The year fraction and starting date were included in order to attempt to account for long duration cyclic behaviors, such as seasonal weather patterns, and years in which the sea or atmosphere were unusually warm or cold. The effect of short duration weather patterns and ocean conditions could not be examined with the current data set. The responses analyzed were the storm latitude, longitude and intensity, as recorded in the data set, 24 or 120 hours beyond the current state. Several ANOVA modeling schemes were examined. Two forms of validation were used: 1) comparison with official hurricane prediction performance metrics and 2) cases studies conducted on hurricanes from the 2005 season, which were not included within the model construction and ANOVA assessment. In general, the ANOVA technique did not perform as well as the established official prediction performance metrics published by NOAA; still, the technique did remarkably well in this demonstration with a difficult data set and could probably be made to perform better with more knowledge of hurricane development and dynamics applied to the problem. The technique provides a repeatable prediction process that eliminates the need for judgment in the forecast.

  12. Comparison of the Effects of Lanolin, Peppermint, and Dexpanthenol Creams on Treatment of Traumatic Nipples in Breastfeeding Mothers.

    PubMed

    Shanazi, Mahnaz; Farshbaf Khalili, Azizeh; Kamalifard, Mahin; Asghari Jafarabadi, Mohammad; Masoudin, Kazhal; Esmaeli, Fariba

    2015-12-01

    Traumatic nipple is among the most common problems of the breastfeeding period which leads to early cessation of breastfeeding. The study aimed to compare the effects of the lanolin, peppermint, and dexpanthenol creams on the treatment of traumatic nipples. This double-blind randomized controlled trial was carried out on 126 breastfeeding mothers. The mothers had visited at the health centers and children's hospitals in Sanandaj City. The selected participants were randomly divided into the following three groups of lanolin, peppermint, and dexpanthenol cream groups. Nipple pain was measured using the Store scale while trauma was measured with the Champion scale. Analyses were carried out through the Kruskal-Wallis test, Chi-square, ANOVA, and repeated measures ANOVA by using SPSS software ver. 13. The result showed that the mean score of nipple pain and nipple trauma at the prior to intervention stage, third, seventh, and fourteenth days of intervention was not significantly different between three groups. But, repeated measures ANOVA showed a significant difference in comparison of the four time periods of intervention in each group. RESULTS of this study revealed that the lanolin, peppermint, and dexpanthenol medicines had similar therapeutic effects on traumatic nipple.

  13. Synthesis, structure characterization and catalytic activity of nickel tungstate nanoparticles

    NASA Astrophysics Data System (ADS)

    Pourmortazavi, Seied Mahdi; Rahimi-Nasrabadi, Mehdi; Khalilian-Shalamzari, Morteza; Zahedi, Mir Mahdi; Hajimirsadeghi, Seiedeh Somayyeh; Omrani, Ismail

    2012-12-01

    Taguchi robust design was applied to optimize experimental parameters for controllable, simple and fast synthesis of nickel tungstate nanoparticles. NiWO4 nanoparticles were synthesized by precipitation reaction involving addition of nickel ion solution to the tungstate aqueous reagent and then formation of nickel tungstate nucleolus which are insoluble in aqueous media. Effects of various parameters such as nickel and tungstate concentrations, flow rate of reagent addition and reactor temperature on diameter of synthesized nickel tungstate nanoparticles were investigated experimentally by the aid of orthogonal array design. The results for analysis of variance (ANOVA) showed that particle size of nickel tungstate can be effectively tuned by controlling significant variables involving nickel and tungstate concentrations and flow rate; while, temperature of the reactor has a no considerable effect on the size of NiWO4 particles. The ANOVA results proposed the optimum conditions for synthesis of nickel tungstate nanoparticles via this technique. Also, under optimum condition nanoparticles of NiWO4 were prepared and their structure and chemical composition were characterized by means of EDAX, XRD, SEM, FT-IR spectroscopy, UV-vis spectroscopy, and photoluminescence. Finally, catalytic activity of the nanoparticles in a cycloaddition reaction was examined.

  14. Comparison of the Effect of Toothbrushing Education Via Video, Lecture and Pamphlet on the Dental Plaque Index of 12-Year-Old Children.

    PubMed

    Ramezaninia, Javad; Naghibi Sistani, Mohammad Mehdi; Ahangari, Zohreh; Gholinia, Hemmat; Jahanian, Iman; Gharekhani, Samaneh

    2018-04-11

    The aim of this study was to compare the effect of different modes of toothbrushing education (lecture, video and pamphlet) on the dental plaque index (PI) of adolescents. The cluster randomized intervention was performed on 128 participants aged 12 years, who were allocated into four groups based on the type of intervention. Group 1: no intervention; and groups 2, 3, 4: education via lecture, video, and pamphlet, respectively (n = 32). Their plaque index was measured at the baseline, 24 h and two months later. Data were analyzed by repeated measures analysis of variance (ANOVA), one-way ANOVA, independent and paired t-test. The plaque indices of groups 2, 3, 4 at 24 h (p values < 0.001) and two months (p values < 0.001) showed a significant reduction when compared to the baseline. The lowest PI score was observed in the pamphlet, video and lecture groups at 24 h, respectively. After 2 months, the lowest score of PI was measured in lecture, video and pamphlet groups, respectively; however, these differences were non-significant. Therefore, toothbrushing education via lecture, video and pamphlet reduced the dental plaque index with the same effectiveness.

  15. Masticatory and cervical muscle tenderness and pain sensitivity in a remote area in subjects with a temporomandibular disorder and neck disability.

    PubMed

    Silveira, Anelise; Armijo-Olivo, Susan; Gadotti, Inae C; Magee, David

    2014-01-01

    To compare the masticatory and cervical muscle tenderness and pain sensitivity in the hand (remote region) between patients with temporomandibular disorders (TMD) and healthy controls. Twenty female subjects were diagnosed with chronic TMD, and 20 were considered healthy. Subjects completed the Neck Disability Index and Limitations of Daily Functions in a TMD questionnaire. Tenderness of the masticatory and cervical muscles and pain sensitivity in the hand were measured using an algometer. Three-way mixed analysis of variance (ANOVA) evaluated differences in muscle tenderness between groups. One-way ANOVA compared pain sensitivity in the hand between groups. Effect sizes were assessed using Cohen guidelines. Significantly increased masticatory and cervical muscle tenderness and pain sensitivity in the hand were found in subjects with TMD when compared with healthy subjects. Moderate to high effect sizes showed the clinical relevance of the findings. The results of this study have highlighted the importance of assessing TMD patients not only in the craniofacial region but also in the neck and other parts of the body. Future studies should focus on testing the effectiveness of treatments addressing the neck and the pain sensitivity in the hand in patients with TMD.

  16. Comparison of the effect of three autogenous bone harvesting methods on cell viability in rabbits

    PubMed Central

    Moradi Haghgoo, Janet; Arabi, Seyed Reza; Hosseinipanah, Seyyed Mohammad; Solgi, Ghasem; Rastegarfard, Neda; Farhadian, Maryam

    2017-01-01

    Background. This study was designed to compare the viability of autogenous bone grafts, harvested using different methods, in order to determine the best harvesting technique with respect to more viable cells. Methods. In this animal experimental study, three harvesting methods, including manual instrument (chisel), rotary device and piezosurgery, were used for harvesting bone grafts from the lateral body of the mandible on the left and right sides of 10 rabbits. In each group, 20 bone samples were collected and their viability was assessed using MTS kit. Statistical analyses, including ANOVA and post hoc Tukey tests, were used for evaluating significant differences between the groups. Results. One-way ANOVA showed significant differences between all the groups (P=0.000). Data analysis using post hoc Tukey tests indicated that manual instrument and piezosurgery had no significant differences with regard to cell viability (P=0.749) and the cell viability in both groups was higher than that with the use of a rotary instrument (P=0.000). Conclusion. Autogenous bone grafts harvested with a manual instrument and piezosurgery had more viable cells in comparison to the bone chips harvested with a rotary device. PMID:28748046

  17. Findings regarding the relationships between sociodemographic, psychological, comorbidity factors, and functional status, in geriatric inpatients.

    PubMed

    Capisizu, Ana; Aurelian, Sorina; Zamfirescu, Andreea; Omer, Ioana; Haras, Monica; Ciobotaru, Camelia; Onose, Liliana; Spircu, Tiberiu; Onose, Gelu

    2015-01-01

    To assess the impact of socio-demographic and comorbidity factors, and quantified depressive symptoms on disability in inpatients. Observational cross-sectional study, including a number of 80 elderly (16 men, 64 women; mean age 72.48 years; standard deviation 9.95 years) admitted in the Geriatrics Clinic of "St. Luca" Hospital, Bucharest, between May-July, 2012. We used the Functional Independence Measure, Geriatric Depression Scale and an array of socio-demographic and poly-pathology parameters. Statistical analysis included Wilcoxon and Kruskal-Wallis tests for ordinal variables, linear bivariate correlations, general linear model analysis, ANOVA. FIM scores were negatively correlated with age (R=-0.301; 95%CI=-0.439 -0.163; p=0.007); GDS scores had a statistically significant negative correlation (R=-0.322; 95% CI=-0.324 -0.052; p=0.004) with FIM scores. A general linear model, including other variables (gender, age, provenance, matrimonial state, living conditions, education, respectively number of chronic illnesses) as factors, found living conditions (p=0.027) and the combination of matrimonial state and gender (p=0.004) to significantly influence FIM scores. ANOVA showed significant differences in FIM scores stratified by the number of chronic diseases (p=0.035). Our study objectified the negative impact of depression on functional status; interestingly, education had no influence on FIM scores; living conditions and a combination of matrimonial state and gender had an important impact: patients with living spouses showed better functional scores than divorced/widowers; the number of chronic diseases also affected the FIM scores: lower in patients with significant polypathology. These findings should be considered when designing geriatric rehabilitation programs, especially for home--including skilled--cares.

  18. Characterization of Italian honeys (Marche Region) on the basis of their mineral content and some typical quality parameters

    PubMed Central

    Conti, Marcelo Enrique; Stripeikis, Jorge; Campanella, Luigi; Cucina, Domenico; Tudino, Mabel Beatriz

    2007-01-01

    Background The characterization of three types of Marche (Italy) honeys (Acacia, Multifloral, Honeydew) was carried out on the basis of the their quality parameters (pH, sugar content, humidity) and mineral content (Na, K, Ca, Mg, Cu, Fe, and Mn). Pattern recognition methods such as principal components analysis (PCA) and linear discriminant analysis (LDA) were performed in order to classify honey samples whose botanical origins were different, and identify the most discriminant parameters. Lastly, using ANOVA and correlations for all parameters, significant differences between diverse types of honey were examined. Results Most of the samples' water content showed good maturity (98%) whilst pH values were in the range 3.50 – 4.21 confirming the good quality of the honeys analysed. Potassium was quantitatively the most relevant mineral (mean = 643 ppm), accounting for 79% of the total mineral content. The Ca, Na and Mg contents account for 14, 3 and 3% of the total mineral content respectively, while other minerals (Cu, Mn, Fe) were present at very low levels. PCA explained 75% or more of the variance with the first two PC variables. The variables with higher discrimination power according to the multivariate statistical procedure were Mg and pH. On the other hand, all samples of acacia and honeydew, and more than 90% of samples of multifloral type have been correctly classified using the LDA. ANOVA shows significant differences between diverse floral origins for all variables except sugar, moisture and Fe. Conclusion In general, the analytical results obtained for the Marche honeys indicate the products' high quality. The determination of physicochemical parameters and mineral content in combination with modern statistical techniques can be a useful tool for honey classification. PMID:17880749

  19. Development of a Vitality Scan related to workers' sustainable employability: a study assessing its internal consistency and construct validity.

    PubMed

    Brouwers, Livia A M; Engels, Josephine A; Heerkens, Yvonne F; van der Beek, Allard J

    2015-06-16

    Most validated sustainable employability questionnaires are extensive and difficult to obtain. Our objective was to develop a usable and valid tool, a Vitality Scan, to determine possible signs of stagnation in one's functioning related to sustainable employability and to establish the instrument's internal consistency and construct validity. A literature review was performed and expert input was obtained to develop an online survey of 31 items. A sample of 1722 Dutch employees was recruited. Internal consistency was assessed by Cronbach's alpha. The underlying theoretical concepts were extracted by factor analysis using a principal component method. For construct validity, a priori hypotheses were defined for expected differences between known subgroups: 1) older workers would report more stagnation than younger workers, and 2) less educated workers would report more problems than the highly educated ones. Both hypotheses were statistically tested using ANOVA. Internal consistency measures and factor analysis resulted in five subscales with acceptable to good reliability (Cronbach's alpha 0.72-0.87). These subscales included: balance and competence, motivation and involvement, resilience, mental and physical health, and social support at work. Three items were removed following these analyses. In accordance with our a priori hypothesis 1, the ANOVA showed that older workers reported the most problems, while younger workers reported the least problems. However, hypothesis 2 was not confirmed: no significant differences were found for education level. The developed Vitality Scan - with the 28 remaining items - showed good measurement properties. It is applicable as a user-friendly, evaluative instrument for worker's sustainable employability. The scan's value for determining whether or not the employee is at risk for a decrease in functioning during present and future work, should be further tested.

  20. Transcranial direct current stimulation (tDCS) neuromodulatory effects on mechanical hyperalgesia and cortical BDNF levels in ovariectomized rats.

    PubMed

    da Silva Moreira, Sônia Fátima; Medeiros, Liciane Fernandes; de Souza, Andressa; de Oliveira, Carla; Scarabelot, Vanessa Leal; Fregni, Felipe; Caumo, Wolnei; Torres, Iraci L S

    2016-01-15

    Epidemiological studies show that painful disorders are more prevalent in women than in men, and the transcranial direct current stimulation (tDCS) technique has been tested in chronic pain states. We explored the effect of tDCS on pain behavior and brain-derived neurotrophic factor (BDNF) levels in ovariectomized rats. Forty-five female Wistar adult rats were distributed into five groups: control (CT), ovariectomy + tDCS (OT), ovariectomy + sham tDCS (OS), sham ovariectomy + tDCS (ST), and sham ovariectomy+shamtDCS (SS). The rats were subjected to cathodal tDCS. The vaginal cytology and the estradiol levels confirmed the hormonal status. In addition, nociceptive behavior was evaluated using the tail-flick, von Frey, and hot-plate tests, as well as the BDNF levels in the serum, hypothalamus, hippocampus, spinal cord, and cerebral cortex. One-way analysis of variance (ANOVA) or two-way ANOVA was used for statistical analysis, followed by the Bonferroni, and P-value b 0.05 was considered significant. The ovariectomized animals presented a hypersensitivity response in the hot-plate (P b 0.01) and von Frey (P b 0.05) tests, as well as increased serum BDNF (P b 0.05) and decreased hypothalamic BDNF (P b 0.01) levels. The OT, OS, ST, and SS groups showed decreased hippocampal BDNF levels as compared with the control group (P b 0.001). The interaction between tDCS and ovariectomy on the cortical BDNF levels (P b 0.01) was observed. The ovariectomy induced nociceptive hypersensitivity and altered serum and hypothalamic BDNF levels. The cathodal tDCS partially reversed nociceptive hypersensitivity.

  1. Digital versus conventional techniques for pattern fabrication of implant-supported frameworks.

    PubMed

    Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

    2018-01-01

    The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method ( n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal-Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups ( P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group ( P < 0.001), while there was no significant difference between the two other groups ( P = 0.54). CAD/CAM group required significantly more adjustments ( P < 0.001). CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations.

  2. Lower incisor inclination regarding different reference planes.

    PubMed

    Zataráin, Brenda; Avila, Josué; Moyaho, Angeles; Carrasco, Rosendo; Velasco, Carmen

    2016-09-01

    The purpose of this study was to assess the degree of lower incisor inclination with respect to different reference planes. It was an observational, analytical, longitudinal, prospective study conducted on 100 lateral cephalograms which were corrected according to the photograph in natural head position in order to draw the true vertical plane (TVP). The incisor mandibular plane angle (IMPA) was compensated to eliminate the variation of the mandibular plane growth type with the formula "FMApx.- 25 (FMA) + IMPApx. = compensated IMPA (IMPACOM)". As the data followed normal distribution determined by the KolmogorovSmirnov test, parametric tests were used for the statistical analysis, Ttest, ANOVA and Pearson coefficient correlation test. Statistical analysis was performed using a statistical significance of p <0.05. There is correlation between TVP and NB line (NB) (0.8614), Frankfort mandibular incisor angle (FMIA) (0.8894), IMPA (0.6351), Apo line (Apo) (0.609), IMPACOM (0.8895) and McHorris angle (MH) (0.7769). ANOVA showed statistically significant differences between the means for the 7 variables with 95% confidence level, P=0.0001. The multiple range test showed no significant difference among means: APoNB (0.88), IMPAMH (0.36), IMPANB (0.65), FMIAIMPACOM (0.01), FMIATVP (0.18), TVPIMPACOM (0.17). There was correlation among all reference planes. There were statistically significant differences among the means of the planes measured, except for IMPACOM, FMIA and TVP. The IMPA differed significantly from the IMPACOM. The compensated IMPA and the FMIA did not differ significantly from the TVP. The true horizontal plane was mismatched with Frankfort plane in 84% of the sample with a range of 19°. The true vertical plane is adequate for measuring lower incisor inclination. Sociedad Argentina de Investigación Odontológica.

  3. Immediate effects of atlanto-occipital joint manipulation on active mouth opening and pressure pain sensitivity in women with mechanical neck pain.

    PubMed

    Mansilla-Ferragut, Pilar; Fernández-de-Las Peñas, César; Alburquerque-Sendín, Francisco; Cleland, Joshua A; Boscá-Gandía, Juan José

    2009-02-01

    The purpose of this study was to investigate the effects of a spinal thrust manipulation directed to the upper cervical segments (atlanto-occipital joint) on active mouth opening and pressure pain sensitivity in a trigeminal nerve innervated region (sphenoid bone) in women with mechanical neck pain. Thirty-seven women, ages 21 to 50 years old (mean age, 35 +/- 8 years) with mechanical neck pain were recruited for this study. Participants were randomly assigned into 1 of 2 groups as follows: an experimental group that received a spinal manipulation of the atlanto-occipital joint and a control group that received a manual contact placebo intervention. Outcomes collected were assessed pretreatment and 5 minutes posttreatment by an assessor blinded to the treatment allocation and included active mouth opening and pressure pain thresholds (PPTs) over both sides of the sphenoid bone. A 2-way repeated measures analysis of variance (ANOVA) with time (pre-post) as the within subjects variable and group (control, experimental) as the between subjects variable was used to examine the effects of the intervention. The hypothesis of interest was group-time interaction. The ANOVA showed a significant effect for time (F = 23.1; P < .001) and an interaction between group and time (F = 37.7; P < .001) for active mouth opening as follows: the experimental group showed a greater improvement when compared to the control group. A large positive within-group effect size (d > 1.5) for the experimental group, whereas a negative medium within-group effect size (d = -0.5) for the control group were identified. The ANOVA showed a significant interaction between group and time (F = 14.4; P < .001) for PPT levels at the sphenoid bone as follows: the experimental group showed a greater improvement when compared to the control group. A medium positive within-group effect size (d = -0.5) for the experimental group, whereas a negative medium within-group effect size (d = -0.5) for the control group was found. Our findings suggest that the application of an atlantoaxial joint thrust manipulation resulted in an increase in active mouth opening and PPT over a trigeminal nerve distribution area (sphenoid bone) in women with mechanical neck pain.

  4. Protein differences between human trapezius and vastus lateralis muscles determined with a proteomic approach.

    PubMed

    Hadrévi, Jenny; Hellström, Fredrik; Kieselbach, Thomas; Malm, Christer; Pedrosa-Domellöf, Fatima

    2011-08-10

    The trapezius muscle is a neck muscle that is susceptible to chronic pain conditions associated with repetitive tasks, commonly referred to as chronic work-related myalgia, hence making the trapezius a muscle of clinical interest. To provide a basis for further investigations of the proteomic traits of the trapezius muscle in disease, two-dimensional difference gel electrophoresis (2D-DIGE) was performed on the healthy trapezius using vastus lateralis as a reference. To obtain as much information as possible from the vast proteomic data set, both one-way ANOVA, with and without false discovery rate (FDR) correlation, and partial least square projection to latent structures with discriminant analysis (PLS-DA) were combined to compare the outcome of the analysis. The trapezius and vastus lateralis showed significant differences in metabolic, contractile and regulatory proteins, with different results depending on choice of statistical approach and pre-processing technique. Using the standard method, FDR correlated one-way ANOVA, 42 protein spots differed significantly in abundance between the two muscles. Complementary analysis using immunohistochemistry and western blot confirmed the results from the 2D-DIGE analysis. The proteomic approach used in the present study combining 2D-DIGE and multivariate modelling provided a more comprehensive comparison of the protein profiles of the human trapezius and vastus lateralis muscle, than previously possible to obtain with immunohistochemistry or SDS-PAGE alone. Although 2D-DIGE has inherent limitations it is particularly useful to comprehensively screen for important structural and metabolic proteins, and appears to be a promising tool for future studies of patients suffering from chronic work related myalgia or other muscle diseases.

  5. Higher cortisol levels at diurnal trough predict greater attentional bias towards threat in healthy young adults.

    PubMed

    Hakamata, Yuko; Izawa, Shuhei; Sato, Eisuke; Komi, Shotaro; Murayama, Norio; Moriguchi, Yoshiya; Hanakawa, Takashi; Inoue, Yusuke; Tagaya, Hirokuni

    2013-11-01

    Attentional bias (AB), selective information processing towards threat, can exacerbate anxiety and depression. Despite growing interest, physiological determinants of AB are yet to be understood. We examined whether stress hormone cortisol and its diurnal variation pattern contribute to AB. Eighty-seven healthy young adults underwent assessments for AB, anxious personality traits, depressive symptoms, and attentional function. Salivary cortisol was collected at three time points daily (at awakening, 30 min after awakening, and bedtime) for 2 consecutive days. We performed: (1) multiple regression analysis to examine the relationships between AB and the other measures and (2) analysis of variance (ANOVA) between groups with different cortisol variation patterns for the other measures. Multiple regression analysis revealed that higher cortisol levels at bedtime (p<0.001), an anxious personality trait (p=0.011), and years of education (p=0.036) were included in the optimal model to predict AB (adjusted R(2)=0.234, p<0.001). ANOVA further demonstrated significant mean differences in AB and depressive symptoms; individuals with blunted cortisol variation exhibited significantly greater AB and depression than those with moderate variation (p=0.037 and p=0.009, respectively). Neuropsychological assessment focused on attention and cortisol measurement at three time points daily. We showed that higher cortisol levels at bedtime and blunted cortisol variation are associated with greater AB. Individuals who have higher cortisol levels at diurnal trough might be at risk of clinical anxiety or depression but could also derive more benefits from the attentional-bias-modification program. © 2013 Elsevier B.V. All rights reserved.

  6. Analysis of factors that affect shoulder balance after correction surgery in scoliosis: a global analysis of all the curvature types.

    PubMed

    Hong, Jae-Young; Suh, Seung-Woo; Modi, Hitesh N; Yang, Jae-Hyuk; Park, Si-Young

    2013-06-01

    To identify factors that can affect postoperative shoulder balance in AIS. 89 adolescent idiopathic scoliosis patients with six types of curvatures who underwent surgery were included in this study. Whole spine antero-posterior and lateral radiographs were obtained pre- and postoperatively. In radiograms, shape and changes in curvatures were analyzed. In addition, four shoulder parameters and coronal balance were analyzed in an effort to identify factors significantly related to postoperative shoulder balance. In general, all the four shoulder parameters (CHD, CA, CRID, RSH) were slightly increased at final follow up (t test, P < 0.05), although there was a decrease in Lenke type II and IV curvatures. However, pre- and postoperative shoulder parameters were not significantly different between each curvature types (ANOVA, P > 0.05). Moreover, no significant differences of pre- and postoperative shoulder level between different level of proximal fusion groups (ANOVA, P > 0.05) existed. In the analysis of coronal curvature changes, no difference was observed in every individual coronal curvatures between improved shoulder balance and aggravated groups (P > 0.05). However, the middle to distal curve change ratio was significantly lower in patients with aggravated shoulder balance (P < 0.05). In addition, patients with smaller preoperative shoulder imbalance showed the higher chance of aggravation after surgery with similar postoperative changes (P < 0.05). Significant relations were found between correction rate of middle, and distal curvature, and postoperative shoulder balance. In addition, preoperative shoulder level difference can be a determinant of postoperative shoulder balance.

  7. Determining Sample Sizes for Precise Contrast Analysis with Heterogeneous Variances

    ERIC Educational Resources Information Center

    Jan, Show-Li; Shieh, Gwowen

    2014-01-01

    The analysis of variance (ANOVA) is one of the most frequently used statistical analyses in practical applications. Accordingly, the single and multiple comparison procedures are frequently applied to assess the differences among mean effects. However, the underlying assumption of homogeneous variances may not always be tenable. This study…

  8. Fluorescence hyperspectral imaging technique for the foreign substance detection on fresh-cut lettuce

    USDA-ARS?s Scientific Manuscript database

    Nondestructive methods based on fluorescence hyperspectral imaging (HSI) techniques were developed in order to detect worms on fresh-cut lettuce. The optimal wavebands for detecting worms on fresh-cut lettuce were investigated using the one-way ANOVA analysis and correlation analysis. The worm detec...

  9. Uncertainty Analysis for a Jet Flap Airfoil

    NASA Technical Reports Server (NTRS)

    Green, Lawrence L.; Cruz, Josue

    2006-01-01

    An analysis of variance (ANOVA) study was performed to quantify the potential uncertainties of lift and pitching moment coefficient calculations from a computational fluid dynamics code, relative to an experiment, for a jet flap airfoil configuration. Uncertainties due to a number of factors including grid density, angle of attack and jet flap blowing coefficient were examined. The ANOVA software produced a numerical model of the input coefficient data, as functions of the selected factors, to a user-specified order (linear, 2-factor interference, quadratic, or cubic). Residuals between the model and actual data were also produced at each of the input conditions, and uncertainty confidence intervals (in the form of Least Significant Differences or LSD) for experimental, computational, and combined experimental / computational data sets were computed. The LSD bars indicate the smallest resolvable differences in the functional values (lift or pitching moment coefficient) attributable solely to changes in independent variable, given just the input data points from selected data sets. The software also provided a collection of diagnostics which evaluate the suitability of the input data set for use within the ANOVA process, and which examine the behavior of the resultant data, possibly suggesting transformations which should be applied to the data to reduce the LSD. The results illustrate some of the key features of, and results from, the uncertainty analysis studies, including the use of both numerical (continuous) and categorical (discrete) factors, the effects of the number and range of the input data points, and the effects of the number of factors considered simultaneously.

  10. Initial oral biofilm formation on titanium implants with different surface treatments: An in vivo study.

    PubMed

    Ferreira Ribeiro, Cyntia; Cogo-Müller, Karina; Franco, Gilson Cesar; Silva-Concílio, Laís Regiane; Sampaio Campos, Márcia; de Mello Rode, Sigmar; Claro Neves, Ana Christina

    2016-09-01

    The aim of this study was to examine in vivo the initial bacterial adhesion on titanium implants with different surface treatments. Ten subjects wore oral splints containing machined pure titanium disks (Ti-M), acid-etched titanium (Ti-AE) and anodized and laser irradiated disks (Ti-AL) for 24h. After this period, disks were removed from the splints and adherent bacteria were quantified by an enzymatic assay to assess total viable bacteria and by Real Time PCR to evaluate total bacteria and Streptococcus oralis levels. Additionally, the initial adherent microorganisms were visualized by scanning electron microscopy (SEM). Titanium surface morphology was verified using SEM, and roughness was evaluated by profilometer analysis. Regarding titanium surface roughness, Ti-AL (1.423±0.397) showed significantly higher Ra values than did Ti-M (0.771±0.182) and Ti-AE (0.735±0.196) (p<0.05, ANOVA - Tahame). Ti-AE and Ti-AL presented roughened micro-structure surfaces characterized by open pores, whereas Ti-M showed long grooves alternating with planed areas. Comparing the Ti-M, Ti-AE and Ti-AL groups for viable bacteria (MTT assay), total bacteria and S. oralis quantification (qPCR), no significant differences were observed among these three groups (p>0.05, ANOVA - Tahame). SEM images showed similar bacterial adhesion on the three titanium surfaces, predominantly characterized by cocci and several bacilli, indicating an initial colonization of the oral biofilm. In conclusion, roughness and microtopography did not stimulate initial biofilm formation on titanium surfaces with different surface treatments. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. A Practical Guide to Estimating the Heritability of Pathogen Traits.

    PubMed

    Mitov, Venelin; Stadler, Tanja

    2018-01-09

    Pathogen traits, such as the virulence of an infection, can vary significantly between patients. A major challenge is to measure the extent to which genetic differences between infecting strains explain the observed variation of the trait. This is quantified by the trait's broad-sense heritability, H2. A recent discrepancy between estimates of the heritability of HIV-virulence has opened a debate on the estimators' accuracy. Here, we show that the discrepancy originates from model limitations and important lifecycle differences between sexually reproducing organisms and transmittable pathogens. In particular, current quantitative genetics methods, such as donor-recipient regression (DR) of surveyed serodiscordant couples and the phylogenetic mixed model (PMM), are prone to underestimate H2, because they neglect or do not fit to the loss of resemblance between transmission partners caused by within-host evolution. In a phylogenetic analysis of 8,483 HIV patients from the UK, we show that the phenotypic correlation between transmission partners decays with the amount of within-host evolution of the virus. We reproduce this pattern in toy-model simulations and show that a phylogenetic Ornstein-Uhlenbeck model (POUMM) outperforms the PMM in capturing this correlation pattern and in quantifying H2. In particular, we show that POUMM outperforms PMM even in simulations without selection - as it captures the mentioned correlation pattern - which has not been appreciated until now. By cross-validating the POUMM estimates with ANOVA on closest phylogenetic pairs (ANOVA-CPP), we obtain H2≈0.2, meaning about 20% of the variation in HIV-virulence is explained by the virus genome both for European and African data. © The Author(s) 2018. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

  12. Does the Rotator Cuff Tear Pattern Influence Clinical Outcomes After Surgical Repair?

    PubMed Central

    Watson, Scott; Allen, Benjamin; Robbins, Chris; Bedi, Asheesh; Gagnier, Joel J.; Miller, Bruce

    2018-01-01

    Background: Limited literature exists regarding the influence of rotator cuff tear morphology on patient outcomes. Purpose: To determine the effect of rotator cuff tear pattern (crescent, U-shape, L-shape) on patient-reported outcomes after rotator cuff repair. Study Design: Cohort study; Level of evidence, 3. Methods: Patients undergoing arthroscopic repair of known full-thickness rotator cuff tears were observed prospectively at regular intervals from baseline to 1 year. The tear pattern was classified at the time of surgery as crescent, U-shaped, or L-shaped. Primary outcome measures were the Western Ontario Rotator Cuff Index (WORC), the American Shoulder and Elbow Surgeons (ASES), and a visual analog scale (VAS) for pain. The tear pattern was evaluated as the primary predictor while controlling for variables known to affect rotator cuff outcomes. Mixed-methods regression and analysis of variance (ANOVA) were used to examine the effects of tear morphology on patient-reported outcomes after surgical repair from baseline to 1 year. Results: A total of 82 patients were included in the study (53 male, 29 female; mean age, 58 years [range, 41-75 years]). A crescent shape was the most common tear pattern (54%), followed by U-shaped (25%) and L-shaped tears (21%). There were no significant differences in outcome scores between the 3 groups at baseline. All 3 groups showed statistically significant improvement from baseline to 1 year, but analysis failed to show any predictive effect in the change in outcome scores from baseline to 1 year for the WORC, ASES, or VAS when tear pattern was the primary predictor. Further ANOVA also failed to show any significant difference in the change in outcome scores from baseline to 1 year for the WORC (P = .96), ASES (P = .71), or VAS (P = .86). Conclusion: Rotator cuff tear pattern is not a predictor of functional outcomes after arthroscopic rotator cuff repair. PMID:29623283

  13. Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system.

    PubMed

    Shim, Ji Suk; Lee, Jin Sook; Lee, Jeong Yol; Choi, Yeon Jo; Shin, Sang Wan; Ryu, Jae Jun

    2015-10-01

    This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sirona's BlueCam), also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns. Forty digital impressions of a master model previously prepared were acquired using an intraoral scanner and divided into four groups based on the software version and on the spacer settings used. The versions 3.8 and 4.2 of the software were used, and the spacer parameter was set at either 40 μm or 80 μm. The marginal and internal fit of the crowns were measured using the replica technique, which uses a low viscosity silicone material that simulates the thickness of the cement layer. The data were analyzed using a Friedman two-way analysis of variance (ANOVA) and paired t-tests with significance level set at p<0.05. The two-way ANOVA analysis showed the software version (p<0.05) and the spacer parameter (p<0.05) significantly affected the crown adaptation. The crowns designed with the version 4.2 of the software showed a better fit than those designed with the version 3.8, particularly in the axial wall and in the inner margin. The spacer parameter was more accurately represented in the version 4.2 of the software than in the version 3.8. In addition, the use of the version 4.2 of the software combined with the spacer parameter set at 80 μm showed the least variation. On the other hand, the outer margin was not affected by the variables. Compared to the version 3.8 of the software, the version 4.2 can be recommended for the fabrication of well-fitting crown restorations, and for the appropriate regulation of the spacer parameter.

  14. Does the Rotator Cuff Tear Pattern Influence Clinical Outcomes After Surgical Repair?

    PubMed

    Watson, Scott; Allen, Benjamin; Robbins, Chris; Bedi, Asheesh; Gagnier, Joel J; Miller, Bruce

    2018-03-01

    Limited literature exists regarding the influence of rotator cuff tear morphology on patient outcomes. To determine the effect of rotator cuff tear pattern (crescent, U-shape, L-shape) on patient-reported outcomes after rotator cuff repair. Cohort study; Level of evidence, 3. Patients undergoing arthroscopic repair of known full-thickness rotator cuff tears were observed prospectively at regular intervals from baseline to 1 year. The tear pattern was classified at the time of surgery as crescent, U-shaped, or L-shaped. Primary outcome measures were the Western Ontario Rotator Cuff Index (WORC), the American Shoulder and Elbow Surgeons (ASES), and a visual analog scale (VAS) for pain. The tear pattern was evaluated as the primary predictor while controlling for variables known to affect rotator cuff outcomes. Mixed-methods regression and analysis of variance (ANOVA) were used to examine the effects of tear morphology on patient-reported outcomes after surgical repair from baseline to 1 year. A total of 82 patients were included in the study (53 male, 29 female; mean age, 58 years [range, 41-75 years]). A crescent shape was the most common tear pattern (54%), followed by U-shaped (25%) and L-shaped tears (21%). There were no significant differences in outcome scores between the 3 groups at baseline. All 3 groups showed statistically significant improvement from baseline to 1 year, but analysis failed to show any predictive effect in the change in outcome scores from baseline to 1 year for the WORC, ASES, or VAS when tear pattern was the primary predictor. Further ANOVA also failed to show any significant difference in the change in outcome scores from baseline to 1 year for the WORC ( P = .96), ASES ( P = .71), or VAS ( P = .86). Rotator cuff tear pattern is not a predictor of functional outcomes after arthroscopic rotator cuff repair.

  15. Sublittoral meiofauna with particular reference to nematodes in the southern Yellow Sea, China

    NASA Astrophysics Data System (ADS)

    Liu, Xiao-Shou; Zhang, Zhi-Nan; Huang, Yong

    2007-02-01

    Densities of major meiofaunal taxa were investigated at 34 sampling stations during six cruises by R/V Beidou to the southern Yellow Sea, China from 2000 to 2004, and the community structure of free-living marine nematodes was studied during one of the cruises in 2003. Meiofauna abundance ranged from 487.4 to 1655.3 individuals per 10 cm 2. Nematodes and harpacticoid copepods were the two most dominant groups, contributing 73.8-92.8% and 3.5-18.7%, respectively, to the total meiofauna abundance. One-way ANOVA showed no significant annual fluctuation of meiofauna and nematode abundances from 2000 to 2004 in the southern Yellow Sea. However, two-way ANOVA based on six stations sampled in 4 years (2001-2004) showed that there were significant differences among the six stations and the 4 sampling years for meiofauna, nematode and copepod abundance. Correlation analysis demonstrated that meiofauna abundance was mainly linked to chloroplastic pigments. Other environmental factors could not be ruled out, however. A total of 232 free-living marine nematode species, belonging to 149 genera, 35 families and 4 orders, were identified. The dominant species in the sampling area were the following: Dorylaimopsis rabalaisi, Microlaimus sp.1, Prochromadorella sp., Promonohystera sp., Cobbia sp.1, Daptonema sp.1, Leptolaimus sp.1, Halalaimus sp.2, Aegialoalaimus sp., Chromadorita sp., Parodontophora marina, Parasphaerolaimus paradoxus, Quadricoma sp.1, Campylaimus sp.1, Halalaimus gracilis, Paramesacanthion sp.1, Paramonohystera sp.1, and Metalinhomoeus longiseta. CLUSTER and SIMPROF analyses revealed three main types of nematode community (or station groups) in the sampling area, including I: coastal community, II: transitory community between coastal and YSCWM (Yellow Sea Cold Water Mass), and III: YSCWM community. Each community was indicated by a number of dominant nematode species. Bio-Env correlation analysis between the nematode community and environmental variables showed that water depth, sediment water content, organic matter, chlorophyll a (Chl- a) and phaeophorbide a (Pha- a) were the most important factors to determine the community structure.

  16. Definition of improvement in juvenile idiopathic arthritis using the juvenile arthritis disease activity score.

    PubMed

    Horneff, Gerd; Becker, Ingrid

    2014-07-01

    The aim of this study was to define improvement thresholds for the Juvenile Arthritis Disease Activity Score (JADAS). Physicians' and parents' judgements on treatment efficacy, the ACR paediatric response measure (PedACR) and JADAS were extracted from BIKER. Patients were categorized by baseline classes in the 10-joint JADAS (JADAS10) as low (5 to <15), moderate (15 to <25) and high (25 to ≤40). Cut-offs for defining improvement following treatment with biologics or MTX were chosen by calculating the interquartile ranges (IQRs) of the judgement groups and considering the accuracy, sensitivity and specificity of the resulting model. Differences in the change of JADAS10 by JIA category were also analysed by analysis of variance (ANOVA). Sensitivity, specificity and accuracy were calculated. A total of 1315 treatment courses were analysed. The ANOVA of the JIA categories showed no significant differences of the mean JADAS10 in all baseline classes and IQRs also showed good overall limits. Therefore all JIA categories were combined for a collective cut-off. Analysis by baseline class revealed clear cut-off points. Improvement could be defined by the minimal decrease in the JADAS10 in baseline class low by 4 (41%), moderate by 10 (53%) and high by 17 (57%). The model shows values for accuracy from 75.6 to 85.5% and comparable values for sensitivity and specificity. Improvement after 3 months can be defined efficiently by the decrease of the JADAS10, depending on the baseline JADAS10 score, which specifies low, moderate or high disease activity. Our model demonstrates clear cut-off values. The JADAS10 may be used in addition to ACR criteria in clinical trials. Also, since the JADAS10 can easily be calculated at each patient visit, it also can be used for clinical decisions. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

    PubMed

    Lazar, Dolores R R; Bottino, Marco C; Ozcan, Mutlu; Valandro, Luiz Felipe; Amaral, Regina; Ussui, Valter; Bressiani, Ana H A

    2008-12-01

    (1) To synthesize 3mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. A coprecipitation route was used to synthesize a 3mol% yttria-stabilized zirconia ceramic processed by uniaxial compaction and pressureless sintering. Commercially available alumina or alumina/zirconia ceramics, namely Procera AllCeram (PA), In-Ceram Zirconia Block (CAZ) and In-Ceram Zirconia (IZ) were chosen for comparison. All specimens (6mmx5mmx5mm) were polished and ultrasonically cleaned. Qualitative phase analysis was performed by XRD and apparent densities were measured on the basis of Archimedes principle. Ceramics were also characterized using SEM, TEM and EDS. The hardness measurements were made employing Vickers hardness test. Fracture toughness (K(IC)) was calculated. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey's test (alpha=0.05). ANOVA revealed that the Vickers hardness (p<0.0001) and fracture toughness (p<0.0001) were affected by the ceramic materials composition. It was confirmed that the PA ceramic was constituted of a rhombohedral alumina matrix, so-called alpha-alumina. Both CAZ and IZ ceramics presented tetragonal zirconia and alpha-alumina mixture of phases. The SEM/EDS analysis confirmed the presence of aluminum in PA ceramic. In the IZ and CAZ ceramics aluminum, zirconium and cerium in grains involved by a second phase containing aluminum, silicon and lanthanum were identified. PA showed significantly higher mean Vickers hardness values (H(V)) (18.4+/-0.5GPa) compared to vitreous CAZ (10.3+/-0.2GPa) and IZ (10.6+/-0.4GPa) ceramics. Experimental Y-TZP showed significantly lower results than that of the other monophased ceramic (PA) (p<0.05) but it showed significantly higher fracture toughness (6.0+/-0.2MPam(1/2)) values when compared to the other tested ceramics (p<0.05). The coprecipitation method used to synthesize zirconia powders and the adopted ceramic processing conditions led to ceramics with mechanical properties comparable to commercially available reinforced ceramic materials.

  18. Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

    NASA Astrophysics Data System (ADS)

    Přibil, Jiří; Přibilová, Anna; Frollo, Ivan

    2017-12-01

    The paper focuses on two methods of evaluation of successfulness of speech signal enhancement recorded in the open-air magnetic resonance imager during phonation for the 3D human vocal tract modeling. The first approach enables to obtain a comparison based on statistical analysis by ANOVA and hypothesis tests. The second method is based on classification by Gaussian mixture models (GMM). The performed experiments have confirmed that the proposed ANOVA and GMM classifiers for automatic evaluation of the speech quality are functional and produce fully comparable results with the standard evaluation based on the listening test method.

  19. Planetarium instructional efficacy: A research synthesis

    NASA Astrophysics Data System (ADS)

    Brazell, Bruce D.

    The purpose of the current study was to explore the instructional effectiveness of the planetarium in astronomy education using meta-analysis. A review of the literature revealed 46 studies related to planetarium efficacy. However, only 19 of the studies satisfied selection criteria for inclusion in the meta-analysis. Selected studies were then subjected to coding procedures, which extracted information such as subject characteristics, experimental design, and outcome measures. From these data, 24 effect sizes were calculated in the area of student achievement and five effect sizes were determined in the area of student attitudes using reported statistical information. Mean effect sizes were calculated for both the achievement and the attitude distributions. Additionally, each effect size distribution was subjected to homogeneity analysis. The attitude distribution was found to be homogeneous with a mean effect size of -0.09, which was not significant, p = .2535. The achievement distribution was found to be heterogeneous with a statistically significant mean effect size of +0.28, p < .05. Since the achievement distribution was heterogeneous, the analog to the ANOVA procedure was employed to explore variability in this distribution in terms of the coded variables. The analog to the ANOVA procedure revealed that the variability introduced by the coded variables did not fully explain the variability in the achievement distribution beyond subject-level sampling error under a fixed effects model. Therefore, a random effects model analysis was performed which resulted in a mean effect size of +0.18, which was not significant, p = .2363. However, a large random effect variance component was determined indicating that the differences between studies were systematic and yet to be revealed. The findings of this meta-analysis showed that the planetarium has been an effective instructional tool in astronomy education in terms of student achievement. However, the meta-analysis revealed that the planetarium has not been a very effective tool for improving student attitudes towards astronomy.

  20. Next-generation sequencing facilitates quantitative analysis of wild-type and Nrl−/− retinal transcriptomes

    PubMed Central

    Brooks, Matthew J.; Rajasimha, Harsha K.; Roger, Jerome E.

    2011-01-01

    Purpose Next-generation sequencing (NGS) has revolutionized systems-based analysis of cellular pathways. The goals of this study are to compare NGS-derived retinal transcriptome profiling (RNA-seq) to microarray and quantitative reverse transcription polymerase chain reaction (qRT–PCR) methods and to evaluate protocols for optimal high-throughput data analysis. Methods Retinal mRNA profiles of 21-day-old wild-type (WT) and neural retina leucine zipper knockout (Nrl−/−) mice were generated by deep sequencing, in triplicate, using Illumina GAIIx. The sequence reads that passed quality filters were analyzed at the transcript isoform level with two methods: Burrows–Wheeler Aligner (BWA) followed by ANOVA (ANOVA) and TopHat followed by Cufflinks. qRT–PCR validation was performed using TaqMan and SYBR Green assays. Results Using an optimized data analysis workflow, we mapped about 30 million sequence reads per sample to the mouse genome (build mm9) and identified 16,014 transcripts in the retinas of WT and Nrl−/− mice with BWA workflow and 34,115 transcripts with TopHat workflow. RNA-seq data confirmed stable expression of 25 known housekeeping genes, and 12 of these were validated with qRT–PCR. RNA-seq data had a linear relationship with qRT–PCR for more than four orders of magnitude and a goodness of fit (R2) of 0.8798. Approximately 10% of the transcripts showed differential expression between the WT and Nrl−/− retina, with a fold change ≥1.5 and p value <0.05. Altered expression of 25 genes was confirmed with qRT–PCR, demonstrating the high degree of sensitivity of the RNA-seq method. Hierarchical clustering of differentially expressed genes uncovered several as yet uncharacterized genes that may contribute to retinal function. Data analysis with BWA and TopHat workflows revealed a significant overlap yet provided complementary insights in transcriptome profiling. Conclusions Our study represents the first detailed analysis of retinal transcriptomes, with biologic replicates, generated by RNA-seq technology. The optimized data analysis workflows reported here should provide a framework for comparative investigations of expression profiles. Our results show that NGS offers a comprehensive and more accurate quantitative and qualitative evaluation of mRNA content within a cell or tissue. We conclude that RNA-seq based transcriptome characterization would expedite genetic network analyses and permit the dissection of complex biologic functions. PMID:22162623

  1. The Stability of Perceived Pubertal Timing across Adolescence

    PubMed Central

    Cance, Jessica Duncan; Ennett, Susan T.; Morgan-Lopez, Antonio A.; Foshee, Vangie A.

    2011-01-01

    It is unknown whether perceived pubertal timing changes as puberty progresses or whether it is an important component of adolescent identity formation that is fixed early in pubertal development. The purpose of this study is to examine the stability of perceived pubertal timing among a school-based sample of rural adolescents aged 11 to 17 (N=6,425; 50% female; 53% White). Two measures of pubertal timing were used, stage-normative, based on the Pubertal Development Scale, a self-report scale of secondary sexual characteristics, and peer-normative, a one-item measure of perceived pubertal timing. Two longitudinal methods were used: one-way random effects ANOVA models and latent class analysis. When calculating intraclass correlation coefficients using the one-way random effects ANOVA models, which is based on the average reliability from one time point to the next, both measures had similar, but poor, stability. In contrast, latent class analysis, which looks at the longitudinal response pattern of each individual and treats deviation from that pattern as measurement error, showed three stable and distinct response patterns for both measures: always early, always on-time, and always late. Study results suggest instability in perceived pubertal timing from one age to the next, but this instability is likely due to measurement error. Thus, it may be necessary to take into account the longitudinal pattern of perceived pubertal timing across adolescence rather than measuring perceived pubertal timing at one point in time. PMID:21983873

  2. Profiling elements in Puerh tea from Yunnan province, China.

    PubMed

    Zhang, Jianyang; Ma, Guicen; Chen, Liyan; Liu, Ting; Liu, Xin; Lu, Chengyin

    2017-09-01

    Puerh tea, as the most representative Chinese dark tea, has attracted global interest in recent years. Profiling the levels of metal elements in Puerh tea is very important since its presence is related to human health. In this study, 41 elements in 98 Puerh tea samples from Yunnan province, China including Puerh raw tea and Puerh ripe tea were evaluated by microwave digestion combined with inductively coupled plasma mass spectrometry . The content of toxic elements, essential elements and rare earth elements of Puerh tea from different regions was discussed in detail. The concentrations of Ba, Cr, As, Pb, Bi, Fe, Zn, V, Mn, Be, Ag and Tl showed significant differences (p < 0.05) by ANOVA analysis. Principal component analysis and linear discriminant analysis were used to describe the relationship of Puerh tea from different regions. This study provided a comprehensive database for Puerh tea quality control and intake risk assessment.

  3. Inquiring the Most Critical Teacher's Technology Education Competences in the Highest Efficient Technology Education Learning Organization

    ERIC Educational Resources Information Center

    Yung-Kuan, Chan; Hsieh, Ming-Yuan; Lee, Chin-Feng; Huang, Chih-Cheng; Ho, Li-Chih

    2017-01-01

    Under the hyper-dynamic education situation, this research, in order to comprehensively explore the interplays between Teacher Competence Demands (TCD) and Learning Organization Requests (LOR), cross-employs the data refined method of Descriptive Statistics (DS) method and Analysis of Variance (ANOVA) and Principal Components Analysis (PCA)…

  4. The Partitioning of Variance Habits of Correlational and Experimental Psychologists: The Two Disciplines of Scientific Psychology Revisited

    ERIC Educational Resources Information Center

    Krus, David J.; Krus, Patricia H.

    1978-01-01

    The conceptual differences between coded regression analysis and traditional analysis of variance are discussed. Also, a modification of several SPSS routines is proposed which allows for direct interpretation of ANOVA and ANCOVA results in a form stressing the strength and significance of scrutinized relationships. (Author)

  5. Comparison of the Effects of Lanolin, Peppermint, and Dexpanthenol Creams on Treatment of Traumatic Nipples in Breastfeeding Mothers

    PubMed Central

    Shanazi, Mahnaz; Farshbaf Khalili, Azizeh; Kamalifard, Mahin; Asghari Jafarabadi, Mohammad; Masoudin, Kazhal; Esmaeli, Fariba

    2015-01-01

    Introduction: Traumatic nipple is among the most common problems of the breastfeeding period which leads to early cessation of breastfeeding. The study aimed to compare the effects of the lanolin, peppermint, and dexpanthenol creams on the treatment of traumatic nipples. Methods: This double-blind randomized controlled trial was carried out on 126 breastfeeding mothers. The mothers had visited at the health centers and children’s hospitals in Sanandaj City. The selected participants were randomly divided into the following three groups of lanolin, peppermint, and dexpanthenol cream groups. Nipple pain was measured using the Store scale while trauma was measured with the Champion scale. Analyses were carried out through the Kruskal–Wallis test, Chi-square, ANOVA, and repeated measures ANOVA by using SPSS software ver. 13. Results: The result showed that the mean score of nipple pain and nipple trauma at the prior to intervention stage, third, seventh, and fourteenth days of intervention was not significantly different between three groups. But, repeated measures ANOVA showed a significant difference in comparison of the four time periods of intervention in each group. Conclusion: Results of this study revealed that the lanolin, peppermint, and dexpanthenol medicines had similar therapeutic effects on traumatic nipple. PMID:26744729

  6. The Changes of Tear Status after Conventional and Wavefront-Guided IntraLASIK

    PubMed Central

    Foo, Say Kiang; Kaur, Sharanjeet; Abd Manan, Faudziah; Low, Aloysius Joseph

    2011-01-01

    Background: IntraLASIK is a LASIK surgery that involved IntraLase femtosecond laser for the corneal flap creating. The objective of this research was to investigate and compare the changes in tear status at 1 and 3 months after undergoing conventional IntraLASIK with Bausch & Lomb PlanoScan (PS) algorithm, Bausch & Lomb Zyoptix Tissue Saving (ZTS) algorithm, and wavefront-guided (WG) IntraLASIK with VISX CustomVue. Methods: Tear status of 36 patients who were divided into 3 groups depending on the type of IntraLASIK they underwent (PS, n = 13; ZTS, n = 9; WG, n = 14) was evaluated. Tear status was determined by classifying the category of the thickness of pre-corneal tear lipid layer, non-invasive tear break-up time, and tear meniscus height. Repeated measures analysis of variance (ANOVA) and one way ANOVA were used for the statistical analyses. Results: The category of the thickness of tear lipid layer, non-invasive tear break up time and tear meniscus height were neither significantly changed after IntraLASIK for all groups nor showed significant difference among groups at 1 and 3 months post-IntraLASIK (P > 0.05). Blinking rate and palpebral aperture also had no significant changed after IntraLASIK. Conclusion: Both conventional (PS and ZTS) and WG IntraLASIK did not affect tear status up to 3 months post-IntraLASIK. WG IntraLASIK did not show superiority in preserving tear status 1 and 3 months post-surgery compared with conventional IntraLASIK. PMID:22135584

  7. A Comparison of Face to Face and Video-Based Self Care Education on Quality of Life of Hemodialysis Patients

    PubMed Central

    Hemmati Maslakpak, Masumeh; Shams, Shadi

    2015-01-01

    Background End stage renal disease negatively affects the patients’ quality of life. There are different educational methods to help these patients. This study was performed to compare the effectiveness of self-care education in two methods, face to face and video educational, on the quality of life in patients under treatment by hemodialysis in education-medical centers in Urmia. Methods In this quasi-experimental study, 120 hemodialysis patients were selected randomly; they were then randomly allocated to three groups: the control, face to face education and video education. For face to face group, education was given individually in two sessions of 35 to 45 minutes. For video educational group, CD was shown. Kidney Disease Quality Of Life- Short Form (KDQOL-SF) questionnaire was filled out before and two months after the intervention. Data analysis was performed in SPSS software by using one-way ANOVA. Results ANOVA test showed a statistically significant difference in the quality of life scores among the three groups after the intervention (P=0.024). After the intervention, Tukey’s post-hoc test showed a statistically significant difference between the two groups of video and face to face education regarding the quality of life (P>0.05). Conclusion Implementation of the face to face and video education methods improves the quality of life in hemodialysis patients. So, it is suggested that video educational should be used along with face to face education. PMID:26171412

  8. Group in-course assessment promotes cooperative learning and increases performance.

    PubMed

    Pratten, Margaret K; Merrick, Deborah; Burr, Steven A

    2014-01-01

    The authors describe and evaluate a method to motivate medical students to maximize the effectiveness of dissection opportunities by using In-Course-Assessments (ICAs) to encourage teamwork. A student's final mark was derived by combining the group dissection mark, group mark for questions, and their individual question mark. An analysis of the impact of the ICA was performed by comparing end of module practical summative marks in student cohorts who had, or had not, participated in the ICAs. Summative marks were compared by two-way ANOVA followed by Dunnets test, or by repeated measures ANOVA, as appropriate. A cohort of medical students was selected that had experienced both practical classes without (year one) and with the new ICA structure (year two). Comparison of summative year one and year two marks illustrated an increased improvement in year two performance in this cohort. A significant increase was also noted when comparing this cohort with five preceding year two cohorts who had not experienced the ICAs (P <0.0001). To ensure that variation in the practical summative examination was not impacting on the data, a comparison was made between three cohorts who had performed the same summative examination. Results show that students who had undertook weekly ICAs showed significantly improved summative marks, compared with those who did not (P <0.0001). This approach to ICA promotes engagement with learning resources in an active, team-based, cooperative learning environment. © 2013 American Association of Anatomists.

  9. Marginal and internal fits of fixed dental prostheses zirconia retainers.

    PubMed

    Beuer, Florian; Aggstaller, Hans; Edelhoff, Daniel; Gernet, Wolfgang; Sorensen, John

    2009-01-01

    CAM (computer-aided manufacturing) and CAD (computer-aided design)/CAM systems facilitate the use of zirconia substructure materials for all-ceramic fixed partial dentures. This in vitro study compared the precision of fit of frameworks milled from semi-sintered zirconia blocks that were designed and machined with two CAD/CAM and one CAM system. Three-unit posterior fixed dental prostheses (FDP) (n=10) were fabricated for standardized dies by: a milling center CAD/CAM system (Etkon), a laboratory CAD/CAM system (Cerec InLab), and a laboratory CAM system (Cercon). After adaptation by a dental technician, the FDP were cemented on definitive dies, embedded and sectioned. The marginal and internal fits were measured under an optical microscope at 50x magnification. A one-way analysis of variance (ANOVA) was used to compare data (alpha=0.05). The mean (S.D.) for the marginal fit and internal fit adaptation were: 29.1 microm (14.0) and 62.7 microm (18.9) for the milling center system, 56.6 microm (19.6) and 73.5 microm (20.6) for the laboratory CAD/CAM system, and 81.4 microm (20.3) and 119.2 microm (37.5) for the laboratory CAM system. One-way ANOVA showed significant differences between systems for marginal fit (P<0.001) and internal fit (P<0.001). All systems showed marginal gaps below 120 microm and were therefore considered clinically acceptable. The CAD/CAM systems were more precise than the CAM system.

  10. A comprehensive morphometric analysis of the internal thoracic artery with emphasis on age, gender and left-to-right specific differences.

    PubMed

    Borović, Milica Labudovi; Borović, Saša; Marinković-Erić, Jelena; Todorović, Vera; Puškaš, Nela; Kočica, Mladen; Radak, Đorđe; Lačković, Vesna

    2013-10-01

    The aim of this analysis was the morphometric description of the internal thoracic artery (ITA) with an emphasis on age, gender and left-to-right specific differences, as well as on age and atherosclerosis related changes of the elastic skeleton. Forty eight arteries were obtained during forensic autopsies from 32 persons who had died of non-vascular causes. The following morphometric parameters were analyzed: thickness of the intima, the medial layer and the wall, the intima-to media-ratio and the elastic skeleton parameters. The intima thickness increases significantly with aging (ANOVA F=34.061, p⟨0.001), as does the intima-to-media ratio (ANOVA F=10.831, p⟨0.001). With aging, there is a significant increase in the thickness of the media (F=56.519; p⟨0.001) and of the wall (F=34.094; p⟨0,001). There is a significant increase in the media thickness during the development of atherosclerosis in the ITA (ANOVA F=11.848, p⟨0.001). No significant difference was found when these data were analyzed based on the left-to-right principle or depending on gender of the patients. However, the analysis of the elastic skeleton parameters indicated that the combined effects of aging, atherosclerosis and male gender lead to the degeneration of the elastic skeleton of the ITA. The grade of atherosclerosis gradually increases with aging as shown by morphometric analysis. The increase in the medial layer thickness suggests the potential for positive remodeling of the ITA during aging and atherosclerosis. The left/right position has no influence on morphometric parameters of the ITA, while male gender affects parameters of the elastic skeleton.

  11. An Examination of Mixed Martial Arts Spectators’ Motives and their Sports Media Consumption in Poland

    PubMed Central

    Zembura, Paweł; Żyśko, Jolanta

    2015-01-01

    The study attempted to analyse the concept of spectators’ motives at mixed martial arts (MMA) events in Poland. In addition, we investigated the relation between motives and sports media consumption. The sample consisted of 273 people attending three similar, regional MMA events. Exploratory factor analysis was used to refine the structure of motives. Confirmatory factor analysis showed a reasonable fit of the obtained model (RMSEA = 0.41). Using ANOVA we found three significant differences in assessment of motives, based on gender. The factor of aesthetics and knowledge was ranked the highest for men and women. Men rated drama and violence, while women perceived socializing and crowd experience, and drama, as the following factors. Path analysis indicated that these motives explained 56% of variance in media consumption for men and 57% for women. The findings showed that the motive of vicarious achievement was the main predictor of media consumption for men, while aesthetics and knowledge were the key predictors for women. The results and ideas for further research are discussed. PMID:26240663

  12. Proximate and elemental analysis of five selected medicinal plants of family Solanaceae.

    PubMed

    Hameed, Ishfaq; Hussain, Farrukh

    2015-07-01

    The proximate analysis revealed the presence of ash, moisture, protein, fiber, fats and carbohydrate. ANOVA showed that ash and moisture contents was non significant between the plant parts and phenological stages. Crude protein was non significant between the plant parts and phenological stages except for Datura innoxia parts but not for its phenolgical stages, while crude fats were non significant between the plant parts and phenological stages except for Solanum nigrum and Solanum surattense parts but not for their phenolgical stages. Crude fiber was non significant between the plant parts and phenological stages except for Datura innoxia parts but not for its phenolgical stages. And carbohydrates was non significant between the plant parts and phenological stages except for the phenolgical stages of Solanum surattense and Withania coagulans. The mineral analysis showed the presence of Cr, Zn, Cu, Mn, Fe, Ca, K, Mg and Na in the roots, stems, leaves, flowers and fruits of the plants in three different phenological stages. Only the micro-minerals were present in traces while the macro-minerals were present high quantities as compared to the micro-minerals.

  13. Assessment of heavy metals in Egretta thula: case study: Coroa Grande mangrove, Sepetiba Bay, Rio de Janeiro, Brazil.

    PubMed

    Ferreira, A P

    2011-02-01

    This study focuses on metals analysis in kidney and liver tissues of Egretta thula which were collected prostrate or newly dead in Coroa Grande mangrove, Sepetiba Bay, Rio de Janeiro, Brazil, between March 2005 and October 2008. Kidney and liver were collected and analysed to evaluate heavy metal pollution. High values and widest range were detected for all metals in liver and kidney tissues. Geometric mean differences from metals concentrations for Zn, Cd, Ni, Pb, Cu, and Cr, respectively, were found in both organs. Results from linear regression analysis were non-significant in kidney (r = -0.79975, P = 0.10428), and in liver (r = -0.53193, P = 0.35618). With ANOVA analysis for metal accumulation differences (kidney*liver), at the 0.05 level, the results were significantly different (F = 33.17676, P = 0.00000; F = 12.47880, P = 0.00000). These results indicate that Sepetiba Bay shows worrying levels of metals in this study with E. thula, showing potential power of widespread biological and mutagenic adverse effects in trophic levels, and therefore, signalling risk to human health.

  14. GPU Accelerated Browser for Neuroimaging Genomics.

    PubMed

    Zigon, Bob; Li, Huang; Yao, Xiaohui; Fang, Shiaofen; Hasan, Mohammad Al; Yan, Jingwen; Moore, Jason H; Saykin, Andrew J; Shen, Li

    2018-04-25

    Neuroimaging genomics is an emerging field that provides exciting opportunities to understand the genetic basis of brain structure and function. The unprecedented scale and complexity of the imaging and genomics data, however, have presented critical computational bottlenecks. In this work we present our initial efforts towards building an interactive visual exploratory system for mining big data in neuroimaging genomics. A GPU accelerated browsing tool for neuroimaging genomics is created that implements the ANOVA algorithm for single nucleotide polymorphism (SNP) based analysis and the VEGAS algorithm for gene-based analysis, and executes them at interactive rates. The ANOVA algorithm is 110 times faster than the 4-core OpenMP version, while the VEGAS algorithm is 375 times faster than its 4-core OpenMP counter part. This approach lays a solid foundation for researchers to address the challenges of mining large-scale imaging genomics datasets via interactive visual exploration.

  15. Assessment of respondent acceptability of preference measures: discriminatory power of graphic positioning scale versus traditional scaling measures.

    PubMed

    Franic, Duska M; Pathak, Dev S

    2003-01-01

    The objective of this study was to compare discriminatory power of two different measures-graphic positioning scale (GPS) versus traditional scale (TS)-in assessing respondent acceptability of three preference measures: visual analog scale (VAS), standard gamble (SG), and willingness to pay (WTP). Two face-to-face interviews were conducted at least 1 week apart in a convenience sample of women aged 22 to 50 years with no history of breast cancer or cancer requiring chemotherapy. Study participation required completion of two surveys: one evaluating health preferences for an acute condition (chemotherapy-induced nausea and vomiting) and one evaluating a chronic condition (breast cancer). Data were collected from March 2000 to June 2000 at Ohio State University. Respondents were randomized to either GPS or TS surveys. Data analysis was a two-step process. First, a four-way multivariate repeated-measures analysis of variance (MANOVA) was conducted to assess respondent acceptability of three-preference metrics-VAS, SG, and WTP-in health-care decision making. Each of the four dependent variables, difficulty, clarity, reasonableness, and comfort in use in decision making, was measured on 9-point Likert scale. Second, a mixed design univariate analysis of variance (ANOVA) was performed for each dependent variable to optimize MANOVA analysis. Univariate ANOVAs, 2 x (2 x 3), were composed of three independent variables: assessment (GPS/TS), condition (acute and chronic), and preferences (VAS, SG, WTP). Of 126 respondents, 119 were usable and complete. MANOVA results showed (P <.05) for two main effects, condition (F4,114 = 6.375) and preferences (F8,110 = 9.290), and two significant interactions, condition x assessment (F4,114 = 3.421) and condition x preferences (F8,110 = 2.087). GPS has higher discriminatory power than TS in assessing respondent attitudes toward health preference measures. Results showed that respondents had more difficulty and less comfort when making decisions for chronic than for acute conditions. Results also show that respondents regard WTP as a more reasonable decision-making tool when assessing acute interventions in preference to SG and vice versa for chronic conditions. Of VAS, SG, and WTP methods, VAS was perceived as being the easiest to understand. These results can be explained by direct versus indirect comparisons made with GPS and TS methods, respectively.

  16. Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances.

    PubMed

    Pestana Passos, S; Dias Vanderlei, A; Ozcan, M; Felipe Valandro, L F; Felipe Valandro, L

    2011-03-01

    This study evaluated, by scanning electron microscope (SEM) and EDS, the effect of different strategies for silica coating (sandblasters, time and distance) of a glass-infiltrated ceramic (In-Ceram Alumina). Forty-one ceramic blocks were produced. For comparison of the three air-abrasion devices, 15 ceramic samples were divided in three groups (N.=5): Bioart, Microetcher and Ronvig (air-abrasion parameters: 20 s at a distance of 10 mm). For evaluation of the time and distance factors, ceramic samples (N.=5) were allocated in groups considering three applied times (5 s, 13 s and 20 s) and two distances (10 mm and 20 mm), using the Ronvig device. In a control sample, no surface treatment was performed. After that, the micro-morphologic analyzes of the ceramic surfaces were made using SEM. EDS analyzes were carried out to detect the % of silica on representative ceramic surface. ANOVA and Tukey tests were used to analyze the results. One-way ANOVA showed the silica deposition was different for different devices (P=0.0054). The Ronvig device promoted the highest silica coating compared to the other devices (Tukey test). Two-way ANOVA showed the distance and time factors did not affect significantly the silica deposition (application time and distance showed no statistical difference). The Ronvig device provided the most effective silica deposition on glass-infiltrated alumina ceramic surface and the studied time and distance for air-abrasion did not affect the silica coating.

  17. MicroCT Analysis of Micro-Nano Titanium Implant Surface on the Osseointegration.

    PubMed

    Ban, Jaesam; Kang, Seongsoo; Kim, Jihyun; Lee, Kwangmin; Hyunpil, Lim; Vang, Mongsook; Yang, Hongso; Oh, Gyejeong; Kim, Hyunseung; Hwang, Gabwoon; Jung, Yongho; Lee, Kyungku; Park, Sangwon; Yunl, Kwidug

    2015-01-01

    This study was to investigate the effects of micro-nano titanium implant surface on the osseointegration. A total of 36 screw-shaped implants were used. The implant surfaces were classified into 3 groups (n = 12): machined surface (M group), nanosurface which is nanotube formation on the machined surface (MA group) and nano-micro surface which is nanotube formation on the RBM surface (RA group). Anodic oxidation was performed at a 20 V for 10 min with 1 M H3PO4 and 1.5 wt% HF solutions. The implants were installed on the humerus on 6 beagles. After 4 and 12 weeks, the morphometric analysis with micro CT (skyscan 1172, SKYSCAN, Antwerpen, Belgium) was done. The data were statistically analyzed with two-way ANOVA. Bone mineral density and bone volume were significantly increased depending on time. RA group showed the highest bone mineral density and bone volume at 4 weeks and 12 weeks significantly. It indicated that nano-micro titanium implant surface showed faster and more mature osseointegration.

  18. [The Influence of Subjective Health Status, Post-Traumatic Growth, and Social Support on Successful Aging in Middle-Aged Women].

    PubMed

    Lee, Seung Hee; Jang, Hyung Suk; Yang, Young Hee

    2016-10-01

    This study was done to investigate factors influencing successful aging in middle-aged women. A convenience sample of 103 middle-aged women was selected from the community. Data were collected using a structured questionnaire and analyzed using descriptive statistics, two-sample t-test, one-way ANOVA, Kruskal Wallis test, Pearson correlations, Spearman correlations and multiple regression analysis with the SPSS/WIN 22.0 program. Results of regression analysis showed that significant factors influencing successful aging were post-traumatic growth and social support. This regression model explained 48% of the variance in successful aging. Findings show that the concept 'post-traumatic growth' is an important factor influencing successful aging in middle-aged women. In addition, social support from friends/co-workers had greater influence on successful aging than social support from family. Thus, we need to consider the positive impact of post-traumatic growth and increase the chances of social participation in a successful aging program for middle-aged women.

  19. Cognitive rehabilitation for individuals with opioid use disorder: A randomized controlled trial.

    PubMed

    Rezapour, Tara; Hatami, Javad; Farhoudian, Ali; Sofuoglu, Mehmet; Noroozi, Alireza; Daneshmand, Reza; Samiei, Ahmadreza; Ekhtiari, Hamed

    2017-11-21

    To examine the efficacy of cognitive rehabilitation treatment (CRT) for people with opioid use disorder who were recruited into a methadone maintenance treatment (MMT) programme. 120 male subjects were randomly assigned to (1) MMT plus CRT in two months or (2) MMT plus a control intervention. Subjects were assessed at the beginning, mid-point and post-intervention as well as at 1-, 3- and 6-month follow-up time points. Analysis with repeated measure ANOVA showed that the CRT group performed significantly better in tests of learning, switching, processing speed, working memory and memory span. Moreover, the CRT group had significantly lower opiate use over the control group during 3-months follow-up. Analysis including only those with a history of methamphetamine use showed that the CRT group had significantly lower amphetamine use. No group differences were observed for treatment retention. Our findings provide evidence that adding CRT as an adjunct intervention to MMT can improve cognitive performance as well as abstinence from both opiates and stimulants.

  20. Application of response surface methodology for optimization of parameters for microwave heating of rare earth carbonates

    NASA Astrophysics Data System (ADS)

    Yin, Shaohua; Lin, Guo; Li, Shiwei; Peng, Jinhui; Zhang, Libo

    2016-09-01

    Microwave heating has been applied in the field of drying rare earth carbonates to improve drying efficiency and reduce energy consumption. The effects of power density, material thickness and drying time on the weight reduction (WR) are studied using response surface methodology (RSM). The results show that RSM is feasible to describe the relationship between the independent variables and weight reduction. Based on the analysis of variance (ANOVA), the model is in accordance with the experimental data. The optimum experiment conditions are power density 6 w/g, material thickness 15 mm and drying time 15 min, resulting in an experimental weight reduction of 73%. Comparative experiments show that microwave drying has the advantages of rapid dehydration and energy conservation. Particle analysis shows that the size distribution of rare earth carbonates after microwave drying is more even than those in an oven. Based on these findings, microwave heating technology has an important meaning to energy-saving and improvement of production efficiency for rare earth smelting enterprises and is a green heating process.

  1. Role strain among male RNs in the critical care setting: Perceptions of an unfriendly workplace.

    PubMed

    Carte, Nicholas S; Williams, Collette

    2017-12-01

    Traditionally, nursing has been a female-dominated profession. Men employed as registered nurses have been in the minority and little is known about the experiences of this demographic. The purpose of this descriptive, quantitative study was to understand the relationship between the variables of demographics and causes of role strain among male nurses in critical care settings. The Sherrod Role Strain Scale assesses role strain within the context of role conflict, role overload, role ambiguity and role incongruity. Data analysis of the results included descriptive and inferential statistics. Inferential statistics involved the use of repeated measures ANOVA testing for significant difference in the causes of role strain between male nurses employed in critical care settings and a post hoc comparison of specific demographic data using multivariate analyses of variance (MANOVAs). Data from 37 male nurses in critical care settings from the northeast of the United States were used to calculate descriptive statistics standard deviation, mean of the data analysis and results of the repeated ANOVA and the post hoc secondary MANOVA analysis. The descriptive data showed that all participants worked full-time. There was an even split from those participants who worked day shift (46%) vs. night shift (43%), most the participants indicated they had 15 years or more experience as an registered nurse (54%). Significant findings of this study include two causes of role strain in male nurses employed in critical care settings which are: role ambiguity and role overload based on ethnicity. Consistent with previous research findings, the results of this study suggest that male registered nurses employed in critical care settings do experience role strain. The two main causes of role strain in male nurses are role ambiguity and role overload. Copyright © 2017. Published by Elsevier Ltd.

  2. MRI-determined liver proton density fat fraction, with MRS validation: Comparison of regions of interest sampling methods in patients with type 2 diabetes.

    PubMed

    Vu, Kim-Nhien; Gilbert, Guillaume; Chalut, Marianne; Chagnon, Miguel; Chartrand, Gabriel; Tang, An

    2016-05-01

    To assess the agreement between published magnetic resonance imaging (MRI)-based regions of interest (ROI) sampling methods using liver mean proton density fat fraction (PDFF) as the reference standard. This retrospective, internal review board-approved study was conducted in 35 patients with type 2 diabetes. Liver PDFF was measured by magnetic resonance spectroscopy (MRS) using a stimulated-echo acquisition mode sequence and MRI using a multiecho spoiled gradient-recalled echo sequence at 3.0T. ROI sampling methods reported in the literature were reproduced and liver mean PDFF obtained by whole-liver segmentation was used as the reference standard. Intraclass correlation coefficients (ICCs), Bland-Altman analysis, repeated-measures analysis of variance (ANOVA), and paired t-tests were performed. ICC between MRS and MRI-PDFF was 0.916. Bland-Altman analysis showed excellent intermethod agreement with a bias of -1.5 ± 2.8%. The repeated-measures ANOVA found no systematic variation of PDFF among the nine liver segments. The correlation between liver mean PDFF and ROI sampling methods was very good to excellent (0.873 to 0.975). Paired t-tests revealed significant differences (P < 0.05) with ROI sampling methods that exclusively or predominantly sampled the right lobe. Significant correlations with mean PDFF were found with sampling methods that included higher number of segments, total area equal or larger than 5 cm(2) , or sampled both lobes (P = 0.001, 0.023, and 0.002, respectively). MRI-PDFF quantification methods should sample each liver segment in both lobes and include a total surface area equal or larger than 5 cm(2) to provide a close estimate of the liver mean PDFF. © 2015 Wiley Periodicals, Inc.

  3. The relationship between consumption of tyrosine and phenylalanine as precursors of catecholamine at breakfast and the circadian typology and mental health in Japanese infants aged 2 to 5 years

    PubMed Central

    2013-01-01

    Background This study aims to examine the relationship between tyrosine and phenylalanine intake at breakfast as precursors of dopamine, and scores on the Torsvall-Åkerstedt Diurnal Type Scale and of mental health in Japanese infants aged 2 to 5 years. Results An integrated questionnaire was administered to parents of 1,367 infants attending one of ten nursery schools governed by Kochi City or a kindergarten affiliated with the Faculty of Education at Kochi University (775 answers for analysis: 56.7%) in May and June 2008. Questionnaires included the Torsvall-Åkerstedt Diurnal Type Scale and questions on sleep habits (onset, offset, quality, quantity, and so on), meal habits (content and regularity of timing), and mental health (depressive states). Amount of tyrosine and phenylalanine intake was calculated based on a breakfast content questionnaire and data on the components of amino acids in foods. Infants who ingested more than 800 mg of tyrosine or phenylalanine at breakfast per meal were more morning-type than those who ingested less than 800 mg (ANOVA: P= 0.005). However, this relationship disappeared in the ANCOVA analysis (with the covariance of tryptophan intake, P= 0.894). Infants who ingested more than 800 mg of the two amino acids at breakfast showed significantly higher mental health scores (lower frequency of depressive states) than those who ingested less than 800 mg (ANOVA: P = 0.004). This relationship remained significant when ANCOVA analysis was performed with the covariance of tryptophan (ANCOVA: P= 0.017). Conclusions These results suggest that tyrosine and phenylalanine ingested at breakfast are not related with circadian phase, but are relate with mental health in infants. PMID:24083356

  4. The Grapefruit: An Alternative Arthroscopic Tool Skill Platform.

    PubMed

    Molho, David A; Sylvia, Stephen M; Schwartz, Daniel L; Merwin, Sara L; Levy, I Martin

    2017-08-01

    To establish the construct validity of an arthroscopic training model that teaches arthroscopic tool skills including triangulation, grasping, precision biting, implant delivery and ambidexterity and uses a whole grapefruit for its training platform. For the grapefruit training model (GTM), an arthroscope and arthroscopic instruments were introduced through portals cut in the grapefruit skin of a whole prepared grapefruit. After institutional review board approval, participants performed a set of tasks inside the grapefruit. Performance for each component was assessed by recording errors, achievement of criteria, and time to completion. A total of 19 medical students, orthopaedic surgery residents, and fellowship-trained orthopaedic surgeons were included in the analysis and were divided into 3 groups based on arthroscopic experience. One-way analysis of variance (ANOVA) and the post hoc Tukey test were used for statistical analysis. One-way ANOVA showed significant differences in both time to completion and errors between groups, F(2, 16) = 16.10, P < .001; F(2, 16) = 17.43, P < .001. Group A had a longer time to completion and more errors than group B (P = .025, P = .019), and group B had a longer time to completion and more errors than group C (P = .023, P = .018). The GTM is an easily assembled and an alternative arthroscopic training model that bridges the gap between box trainers, cadavers, and virtual reality simulators. Our findings suggest construct validity when evaluating its use for teaching the basic arthroscopic tool skills. As such, it is a useful addition to the arthroscopic training toolbox. There is a need for validated low-cost arthroscopic training models that are easily accessible. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  5. Functional morphology of the douc langur (Pygathrix spp.) scapula.

    PubMed

    Bailey, Katie E; Lad, Susan E; Pampush, James D

    2017-06-01

    Most colobine monkeys primarily move through their arboreal environment quadrupedally. Douc langurs (Pygathrix spp.), however, are regularly observed to use suspensory behaviors at the Endangered Primate Rescue Center (EPRC) in Northern Vietnam. Previous work has linked variation in scapular morphology to different modes of primate arboreal locomotion. Here we investigate whether the shape of the Pygathrix scapula resembles obligate brachiators (gibbons) or obligate arboreal quadrupeds (other cercopithecoids). Using a MicroScribe G2X 3D digitizer, the positions of 17 landmarks were recorded on 15 different species of nonhuman primates (n = 100) from three categories of locomotor behavior: brachiator, arboreal quadruped, and unknown (Pygathrix). All analyses were conducted in the R package geomorph. A Procrustes analysis uniformly scaled the shape data and placed specimens into the same morphospace. A Principal Component Analysis was used to examine scapular shape and a Procrustes ANOVA was conducted to test for shape difference in the scapulae. A pairwise analysis was used to compare the means of the locomotor categories and identify any statistically significant differences. A phylogenetically controlled Procrustes ANOVA was also conducted using a phylogeny from 10kTrees. Results show Pygathrix scapular morphology is significantly different from both arboreal colobine quadrupeds (p < 0.01) and hylobatid brachiators (p < 0.01). It does, however, share some features with each including a long vertebral border, like other cercopithecoids, and a more laterally projecting acromion process, like the hylobatids. The principal difference segregating Pygathrix from both the arboreal quadrupeds and the brachiators is the more medially placed superior angle. These nuanced morphological characteristics associated with suspensory behaviors may be useful for inferring suspensory locomotion in the primate fossil record. © 2017 Wiley Periodicals, Inc.

  6. The role of anthropometric, growth and maturity index (AGaMI) influencing youth soccer relative performance

    NASA Astrophysics Data System (ADS)

    Bisyri Husin Musawi Maliki, Ahmad; Razali Abdullah, Mohamad; Juahir, Hafizan; Muhamad, Wan Siti Amalina Wan; Afiqah Mohamad Nasir, Nur; Muazu Musa, Rabiu; Musliha Mat-Rasid, Siti; Adnan, Aleesha; Azura Kosni, Norlaila; Abdullah, Farhana; Ain Shahirah Abdullah, Nurul

    2018-04-01

    The main purpose of this study was to develop Anthropometric, Growth and Maturity Index (AGaMI) in soccer and explore its differences to soccer player physical attributes, fitness, motivation and skills. A total 223 adolescent soccer athletes aged 12 to 18 years old were selected as respondent. AGaMI was develop based on anthropometric components (bicep, tricep, subscapular, suprailiac, calf circumference and muac) with growth and maturity component using tanner scale. Meanwhile, relative performance namely physical, fitness, motivation and skills attributes of soccer were measured as dependent variables. The Principal Component Analysis (PCA) and Analysis of Variance (ANOVA) are used to achieve the objective in this study. AGaMI had categorized players into three different groups namely; high (5 players), moderate (88 players) and low (91 players). PCA revealed a moderate to very strong dominant range of 0.69 to 0.90 of factor loading on AGaMI. Further analysis assigned AGaMI groups as treated as independent variables (IV) and physical, fitness, motivation and skills attributes were treated as dependent variables (DV). Finally, ANOVA showed that flexibility, leg power, age, weight, height, sitting height, short and long pass are the most significant parameters statistically differentiate by the groups of AGaMI (p<0.05). As a summary, body fat mass, growth and maturity are an essential component differentiating the output of the soccer players relative performance. In future, information of the AGaMI model are useful to the coach and players for identifying the suitable biological and physiological demand reflects more comprehensive means of youth soccer relative performance. This study further highlights the importance of assessing AGaMI when identifying soccer relative performance.

  7. Gene set differential analysis of time course expression profiles via sparse estimation in functional logistic model with application to time-dependent biomarker detection.

    PubMed

    Kayano, Mitsunori; Matsui, Hidetoshi; Yamaguchi, Rui; Imoto, Seiya; Miyano, Satoru

    2016-04-01

    High-throughput time course expression profiles have been available in the last decade due to developments in measurement techniques and devices. Functional data analysis, which treats smoothed curves instead of originally observed discrete data, is effective for the time course expression profiles in terms of dimension reduction, robustness, and applicability to data measured at small and irregularly spaced time points. However, the statistical method of differential analysis for time course expression profiles has not been well established. We propose a functional logistic model based on elastic net regularization (F-Logistic) in order to identify the genes with dynamic alterations in case/control study. We employ a mixed model as a smoothing method to obtain functional data; then F-Logistic is applied to time course profiles measured at small and irregularly spaced time points. We evaluate the performance of F-Logistic in comparison with another functional data approach, i.e. functional ANOVA test (F-ANOVA), by applying the methods to real and synthetic time course data sets. The real data sets consist of the time course gene expression profiles for long-term effects of recombinant interferon β on disease progression in multiple sclerosis. F-Logistic distinguishes dynamic alterations, which cannot be found by competitive approaches such as F-ANOVA, in case/control study based on time course expression profiles. F-Logistic is effective for time-dependent biomarker detection, diagnosis, and therapy. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Metabolic Profiling of a Mapping Population Exposes New Insights in the Regulation of Seed Metabolism and Seed, Fruit, and Plant Relations

    PubMed Central

    Toubiana, David; Semel, Yaniv; Tohge, Takayuki; Beleggia, Romina; Cattivelli, Luigi; Rosental, Leah; Nikoloski, Zoran; Zamir, Dani; Fernie, Alisdair R.; Fait, Aaron

    2012-01-01

    To investigate the regulation of seed metabolism and to estimate the degree of metabolic natural variability, metabolite profiling and network analysis were applied to a collection of 76 different homozygous tomato introgression lines (ILs) grown in the field in two consecutive harvest seasons. Factorial ANOVA confirmed the presence of 30 metabolite quantitative trait loci (mQTL). Amino acid contents displayed a high degree of variability across the population, with similar patterns across the two seasons, while sugars exhibited significant seasonal fluctuations. Upon integration of data for tomato pericarp metabolite profiling, factorial ANOVA identified the main factor for metabolic polymorphism to be the genotypic background rather than the environment or the tissue. Analysis of the coefficient of variance indicated greater phenotypic plasticity in the ILs than in the M82 tomato cultivar. Broad-sense estimate of heritability suggested that the mode of inheritance of metabolite traits in the seed differed from that in the fruit. Correlation-based metabolic network analysis comparing metabolite data for the seed with that for the pericarp showed that the seed network displayed tighter interdependence of metabolic processes than the fruit. Amino acids in the seed metabolic network were shown to play a central hub-like role in the topology of the network, maintaining high interactions with other metabolite categories, i.e., sugars and organic acids. Network analysis identified six exceptionally highly co-regulated amino acids, Gly, Ser, Thr, Ile, Val, and Pro. The strong interdependence of this group was confirmed by the mQTL mapping. Taken together these results (i) reflect the extensive redundancy of the regulation underlying seed metabolism, (ii) demonstrate the tight co-ordination of seed metabolism with respect to fruit metabolism, and (iii) emphasize the centrality of the amino acid module in the seed metabolic network. Finally, the study highlights the added value of integrating metabolic network analysis with mQTL mapping. PMID:22479206

  9. Effects of receiving-water quality and wastewater treatment on injury, survival, and regrowth of fecal-indicator bacteria and implications for assessment of recreational water quality

    USGS Publications Warehouse

    Francy, D.S.; Hart, T.L.; Virosteck, C.M.

    1996-01-01

    Bacterial injury, survival, and regrowth were investigated by use of replicate flow-through incubation chambers placed in the Cuyahoga River or Lake Erie in the greater Cleveland metropolitan area during seven 4-day field studies. The chambers contained wastewater or combined-sewer-overflow (CSO) effluents treated three ways-unchlorinated, chlorinated, and dechlorinated. At timestep intervals, the chamber contents were analyzed for concentrations of injured and healthy fecal coliforms by use of standard selective and enhanced-recovery membrane-filtration methods. Mean percent injuries and survivals were calculated from the fecal-coliform concentration data for each field study. The results of analysis of variance (ANOVA) indicated that treatment affected mean percent injury and survival, whereas site did not. In the warm-weather Lake Erie field study, but not in the warm-weather Cuyahoga River studies, the results of ANOVA indicated that dechlorination enhanced the repair of injuries and regrowth of chlorine-injured fecal coliforms on culture media over chlorination alone. The results of ANOVA on the percent injury from CSO effluent field studies indicated that dechlorination reduced the ability of organisms to recover and regrow on culture media over chlorination alone. However, because of atypical patterns of concentration increases and decreases in some CSO effluent samples, more work needs to be done before the effect of dechlorination and chlorination on reducing fecal-coliform concentrations in CSO effluents can be confirmed. The results of ANOVA on percent survivals found statistically significant differences among the three treatment methods for all but one study. Dechlorination was found to be less effective than chlorination alone in reducing the survival of fecal coliforms in wastewater effluent, but not in CSO effluent. If the concentration of fecal coliforms determined by use of the enhanced-recovery method can be predicted accurately from the concentration found by use of the standard method, then increased monitoring and expense to detect chlorine-injured organisms would be unnecessary. The results of linear regression analysis, however, indicated that the relation between enhanced-recovery and standard-method concentrations was best represented when the data were grouped by treatment. The model generated from linear regression of the unchlorinated data set provided an accurate estimate of enhanced-recovery concentrations from standard-method concentrations, whereas the models generated from the chlorinated and dechlorinated data sets did not. In addition, evaluation of fecal-coliform concentrations found in field studies in terms of Ohio recreational water-quality standards showed that concentrations obtained by standard and enhanced-recovery methods were not comparable. Sample treatment and analysis methods were found to affect the percentage of samples meeting and exceeding Ohio's bathing-water, primary-contact, and secondary-contact standards. Therefore, determining the health risk of swimming in receiving waters was often difficult without information on enhanced-recovery method concentrations and was especially difficult in waters receiving high proportions of chlorinated or dechlorinated effluents.

  10. Comparative evaluation of low cost materials as constructed wetland filling media

    NASA Astrophysics Data System (ADS)

    Pinho, Henrique J. O.; Vaz, Mafalda M.; Mateus, Dina M. R.

    2017-11-01

    Three waste materials from civil construction activities were assessed as low cost alternative filling materials used in Constructed Wetlands (CW). CW are green processes for wastewater treatment, whose design includes an appropriate selection of vegetation and filling material. The sustainability of such processes may be incremented using recovered wastes as filling materials. The abilities of the materials to support plant growth and to contribute to pollutants removal from wastewater were assessed and compared to expanded clay, a filling usually used in CW design. Statistical analysis, using one-way ANOVA and Welch's ANOVA, demonstrate that limestone fragments are a better choice of filling material than brick fragments and basalt gravel.

  11. The Influencing Factor Analysis on the Performance Evaluation of Assembly Line Balancing Problem Level 1 (SALBP-1) Based on ANOVA Method

    NASA Astrophysics Data System (ADS)

    Chen, Jie; Hu, Jiangnan

    2017-06-01

    Industry 4.0 and lean production has become the focus of manufacturing. A current issue is to analyse the performance of the assembly line balancing. This study focus on distinguishing the factors influencing the assembly line balancing. The one-way ANOVA method is applied to explore the significant degree of distinguished factors. And regression model is built to find key points. The maximal task time (tmax ), the quantity of tasks (n), and degree of convergence of precedence graph (conv) are critical for the performance of assembly line balancing. The conclusion will do a favor to the lean production in the manufacturing.

  12. Biostatistics Series Module 3: Comparing Groups: Numerical Variables.

    PubMed

    Hazra, Avijit; Gogtay, Nithya

    2016-01-01

    Numerical data that are normally distributed can be analyzed with parametric tests, that is, tests which are based on the parameters that define a normal distribution curve. If the distribution is uncertain, the data can be plotted as a normal probability plot and visually inspected, or tested for normality using one of a number of goodness of fit tests, such as the Kolmogorov-Smirnov test. The widely used Student's t-test has three variants. The one-sample t-test is used to assess if a sample mean (as an estimate of the population mean) differs significantly from a given population mean. The means of two independent samples may be compared for a statistically significant difference by the unpaired or independent samples t-test. If the data sets are related in some way, their means may be compared by the paired or dependent samples t-test. The t-test should not be used to compare the means of more than two groups. Although it is possible to compare groups in pairs, when there are more than two groups, this will increase the probability of a Type I error. The one-way analysis of variance (ANOVA) is employed to compare the means of three or more independent data sets that are normally distributed. Multiple measurements from the same set of subjects cannot be treated as separate, unrelated data sets. Comparison of means in such a situation requires repeated measures ANOVA. It is to be noted that while a multiple group comparison test such as ANOVA can point to a significant difference, it does not identify exactly between which two groups the difference lies. To do this, multiple group comparison needs to be followed up by an appropriate post hoc test. An example is the Tukey's honestly significant difference test following ANOVA. If the assumptions for parametric tests are not met, there are nonparametric alternatives for comparing data sets. These include Mann-Whitney U-test as the nonparametric counterpart of the unpaired Student's t-test, Wilcoxon signed-rank test as the counterpart of the paired Student's t-test, Kruskal-Wallis test as the nonparametric equivalent of ANOVA and the Friedman's test as the counterpart of repeated measures ANOVA.

  13. LED traffic signal replacement schedules : facilitating smooth freight flows.

    DOT National Transportation Integrated Search

    2011-11-01

    This research details a field study of LED traffic signals in Missouri and develops a replacement schedule based on key findings. : Rates of degradation were statistically analyzed using Analysis of Variance (ANOVA). Results of this research will pro...

  14. Effect of silver nano particles on flexural strength of acrylic resins.

    PubMed

    Sodagar, Ahmad; Kassaee, Mohammad Zaman; Akhavan, Azam; Javadi, Negar; Arab, Sepideh; Kharazifard, Mohammad Javad

    2012-04-01

    Poly(methyl methacrylate), PMMA, is widely used for fabrication of removable orthodontic appliances. Silver nano particles (AgNps) have been added to PMMA because of their antimicrobial properties. The aim of this study is to investigate the effect of AgNps on the flexural strength of PMMA. Acrylic liquid containing 0.05% and 0.2% AgNps was prepared for two kinds of acrylic resins: Rapid Repair &Selecta Plus. Two groups without AgNps were used as control groups. For each one, flexural strength was investigated via Three Point Bending method for the 15 acrylic blocks. Two-way ANOVA, one way ANOVA and Tukey tests were used for statistical analysis. Rapid Repair without AgNps showed the highest flexural strength. Addition of 0.05% AgNps to Rapid Repair, significantly decreased its flexural strength while, continuing the addition up to 0.2% increased it nearly up to its primary level. In contrast, addition of AgNps to Selecta Plus increased its flexural strength but addition of 0.05% nano particles was more effective than 0.2%. The effect of AgNps on flexural strength of PMMA depends on several factors including the type of acrylics and the concentrations of nano particles. Copyright © 2011 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  15. Evaluation of removal efficiency of residual diclofenac in aqueous solution by nanocomposite tungsten-carbon using design of experiment.

    PubMed

    Salmani, M H; Mokhtari, M; Raeisi, Z; Ehrampoush, M H; Sadeghian, H A

    2017-09-01

    Wastewater containing pharmaceutical residual components must be treated before being discharged to the environment. This study was conducted to investigate the efficiency of tungsten-carbon nanocomposite in diclofenac removal using design of experiment (DOE). The 27 batch adsorption experiments were done by choosing three effective parameters (pH, adsorbent dose, and initial concentration) at three levels. The nanocomposite was prepared by tungsten oxide and activated carbon powder in a ratio of 1 to 4 mass. The remaining concentration of diclofenac was measured by a spectrometer with adding reagents of 2, 2'-bipyridine, and ferric chloride. Analysis of variance (ANOVA) was applied to determine the main and interaction effects. The equilibrium time for removal process was determined as 30 min. It was observed that the pH had the lowest influence on the removal efficiency of diclofenac. Nanocomposite gave a high removal at low concentration of 5.0 mg/L. The maximum removal for an initial concentration of 5.0 mg/L was 88.0% at contact time of 30 min. The results of ANOVA showed that adsorbent mass was among the most effective variables. Using DOE as an efficient method revealed that tungsten-carbon nanocomposite has high efficiency in the removal of residual diclofenac from the aqueous solution.

  16. Friction Forces during Sliding of Various Brackets for Malaligned Teeth: An In Vitro Study

    PubMed Central

    Crincoli, Vito; Di Bisceglie, Maria Beatrice; Balsamo, Antonio; Serpico, Vitaliano; Chiatante, Francesco; Pappalettere, Carmine; Boccaccio, Antonio

    2013-01-01

    Aims. To measure the friction force generated during sliding mechanics with conventional, self-ligating (Damon 3 mx, Smart Clip, and Time 3) and low-friction (Synergy) brackets using different archwire diameters and ligating systems in the presence of apical and buccal malalignments of the canine. Methods. An experimental setup reproducing the right buccal segment of the maxillary arch was designed to measure the friction force generated at the bracket/wire and wire/ligature interfaces of different brackets. A complete factorial plan was drawn up and a three-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of friction force: (i) degree of malalignment, (ii) diameter of the orthodontic wire, and (iii) bracket/ligature combination. Tukey post hoc test was also conducted to evaluate any statistically significant differences between the bracket/ligature combinations analyzed. Results. ANOVA showed that all the above factors affect the friction force values. The friction force released during sliding mechanics with conventional brackets is about 5-6times higher than that released with the other investigated brackets. A quasilinear increase of the frictional forces was observed for increasing amounts of apical and buccal malalignments. Conclusion. The Synergy bracket with silicone ligature placed around the inner tie-wings appears to yield the best performance. PMID:23533364

  17. Promising hypotensive effect of hawthorn extract: a randomized double-blind pilot study of mild, essential hypertension.

    PubMed

    Walker, Ann F; Marakis, Georgios; Morris, Andrew P; Robinson, Paul A

    2002-02-01

    This pilot study was aimed at investigating the hypotensive potential of hawthorn extract and magnesium dietary supplements individually and in combination, compared with a placebo. Thirty-six mildly hypertensive subjects completed the study. At baseline, anthropometric and dietary assessment, as well as blood pressure measurements were taken at rest, after exercise and after a computer 'stress' test. Volunteers were then randomly assigned to a daily supplement for 10 weeks of either: (a) 600 mg Mg, (b) 500 mg hawthorn extract, (c) a combination of (a) and (b), (d) placebo. Measurements were repeated at 5 and 10 weeks of intervention. There was a decline in both systolic and diastolic blood pressure in all treatment groups, including placebo, but ANOVA provided no evidence of difference between treatments. However, factorial contrast analysis in ANOVA showed a promising reduction (p = 0.081) in the resting diastolic blood pressure at week 10 in the 19 subjects who were assigned to the hawthorn extract, compared with the other groups. Furthermore, a trend towards a reduction in anxiety (p = 0.094) was also observed in those taking hawthorn compared with the other groups. These findings warrant further study, particularly in view of the low dose of hawthorn extract used. Copyright 2002 John Wiley & Sons, Ltd.

  18. Investigation of mechanical, thermal and recycled characteristics of reinforced ternary blends of LDPE/LLDPE/HDPE by ANOVA

    NASA Astrophysics Data System (ADS)

    Maleki, Mahnam; Farzin, Mahmud; Mosaddegh, Peiman

    2018-06-01

    In this study, the effect of high density polyethylene (HDPE) and calcium carbonate (CaCO3) addition into constant amount of low density polyethylene/linear low density polyethylene (LDPE/LLDPE) matrix was investigated by using different mechanical and thermal parameters. Then, analysis of variance (ANOVA) was used to investigate the normal distribution of obtained data. Finally, sample containing 50 Phr of HDPE and 7 Phr of CaCO3 microparticles, was determined as optimized sample. The effect of different process parameters such as injecting back pressure, cooling and retention time, on mechanical and thermal properties of optimized sample was investigated as well. Also to investigate the effect of the number of recycling processes on the mechanical and thermal properties, two dominant degradation mechanisms were suggested. The first was the decreasing of chains molecular weight and formation of short length chains and the later was the formation of crosslinks and three dimensional networks. Results indicated that by increasing the number of recycling processes, crystallinity, melting point, modulus, strength at yielding point and toughness in comparison to pristine sample decreased at first and then showed an ascending trend. Elongation at break by increasing of the number of recycling processes, generally increased in comparison with initial sample.

  19. An Analysis of Research Methods and Statistical Techniques Used by Doctoral Dissertation at the Education Sciences in Turkey

    ERIC Educational Resources Information Center

    Karadag, Engin

    2010-01-01

    To assess research methods and analysis of statistical techniques employed by educational researchers, this study surveyed unpublished doctoral dissertation from 2003 to 2007. Frequently used research methods consisted of experimental research; a survey; a correlational study; and a case study. Descriptive statistics, t-test, ANOVA, factor…

  20. Implications of Therapist Effects for the Design and Analysis of Comparative Studies of Psychotherapies.

    ERIC Educational Resources Information Center

    Crits-Christoph, Paul; Mintz, Jim

    1991-01-01

    Presents reasons therapist should be included as random design factor in nested analysis of (co)variance (AN[C]OVA) design used in psychotherapy research. Reviews studies which indicate majority of investigators ignore issue of effects from incorrect specification of ANOVA design. Presents reanalysis of data from 10 psychotherapy outcome studies…

  1. Heuristics for Understanding the Concepts of Interaction, Polynomial Trend, and the General Linear Model.

    ERIC Educational Resources Information Center

    Thompson, Bruce

    The relationship between analysis of variance (ANOVA) methods and their analogs (analysis of covariance and multiple analyses of variance and covariance--collectively referred to as OVA methods) and the more general analytic case is explored. A small heuristic data set is used, with a hypothetical sample of 20 subjects, randomly assigned to five…

  2. Information and Communication Technology (ICT) Usage and Achievement of Turkish Students in Pisa 2006

    ERIC Educational Resources Information Center

    Aypay, Ahmet

    2010-01-01

    The purpose of this study is to examine the ICT usage and academic achievement of Turkish students in PISA 2006 data. The sample of the study included 4942 students from 160 schools. Frequencies, independent samples t-tests, ANOVAs, pearson correlation coefficients, exploratory factor analysis, and regression analysis were used. A high percentage…

  3. Analysis of residual stress and hardness in regions of pre-manufactured and manual bends in fixation plates for maxillary advancement.

    PubMed

    Araújo, Marcelo Marotta; Lauria, Andrezza; Mendes, Marcelo Breno Meneses; Claro, Ana Paula Rosifini Alves; Claro, Cristiane Aparecida de Assis; Moreira, Roger William Fernandes

    2015-12-01

    The aim of this study was to analyze, through Vickers hardness test and photoelasticity analysis, pre-bent areas, manually bent areas, and areas without bends of 10-mm advancement pre-bent titanium plates (Leibinger system). The work was divided into three groups: group I-region without bend, group II-region of 90° manual bend, and group III-region of 90° pre-fabricated bends. All the materials were evaluated through hardness analysis by the Vickers hardness test, stress analysis by residual images obtained in a polariscope, and photoelastic analysis by reflection during the manual bending. The data obtained from the hardness tests were statistically analyzed using ANOVA and Tukey's tests at a significance level of 5 %. The pre-bent plate (group III) showed hardness means statistically significantly higher (P < 0.05) than those of the other groups (I-region without bends, II-90° manually bent region). Through the study of photoelastic reflection, it was possible to identify that the stress gradually increased, reaching a pink color (1.81 δ / λ), as the bending was performed. A general analysis of the results showed that the bent plate region of pre-bent titanium presented the best results.

  4. Antinociceptive and anticonvulsant activities of hydroalcoholic extract of Jasminum grandiflorum (jasmine) leaves in experimental animals.

    PubMed

    Gupta, Rajesh K; Reddy, Pooja S

    2013-10-01

    Jasminum grandiflorum belongs to the family Oleaceae and is known to have anti-inflammatory, antimicrobial, antioxidant, and antiulcer activities. The present study was undertaken to study its analgesic and anticonvulsant effects in rats and mice. The antinociceptive activity of the hydroalcoholic extract of J. grandiflorum leaves (HEJGL) was studied using tail flick and acetic acid - induced writhing method. Similarly, its anticonvulsant activity was observed by maximal electroshock (MES) method and pentylenetetrazol (PTZ) method. Statistical analysis was performed using one-way analysis of variance (ANOVA) followed by Dunnett's test. At doses of 50, 100, and 200 mg/kg, HEJGL showed significant analgesic and anticonvulsant effects in experimental animals. In view of its analgesic and anticonvulsant activity, the JGL extract can be used in painful conditions as well as in seizure disorders.

  5. Antinociceptive and anticonvulsant activities of hydroalcoholic extract of Jasminum grandiflorum (jasmine) leaves in experimental animals

    PubMed Central

    Gupta, Rajesh K.; Reddy, Pooja S.

    2013-01-01

    Jasminum grandiflorum belongs to the family Oleaceae and is known to have anti-inflammatory, antimicrobial, antioxidant, and antiulcer activities. The present study was undertaken to study its analgesic and anticonvulsant effects in rats and mice. The antinociceptive activity of the hydroalcoholic extract of J. grandiflorum leaves (HEJGL) was studied using tail flick and acetic acid – induced writhing method. Similarly, its anticonvulsant activity was observed by maximal electroshock (MES) method and pentylenetetrazol (PTZ) method. Statistical analysis was performed using one-way analysis of variance (ANOVA) followed by Dunnett's test. At doses of 50, 100, and 200 mg/kg, HEJGL showed significant analgesic and anticonvulsant effects in experimental animals. In view of its analgesic and anticonvulsant activity, the JGL extract can be used in painful conditions as well as in seizure disorders. PMID:24174823

  6. Analysis of Longitudinal Outcome Data with Missing Values in Total Knee Arthroplasty.

    PubMed

    Kang, Yeon Gwi; Lee, Jang Taek; Kang, Jong Yeal; Kim, Ga Hye; Kim, Tae Kyun

    2016-01-01

    We sought to determine the influence of missing data on the statistical results, and to determine which statistical method is most appropriate for the analysis of longitudinal outcome data of TKA with missing values among repeated measures ANOVA, generalized estimating equation (GEE) and mixed effects model repeated measures (MMRM). Data sets with missing values were generated with different proportion of missing data, sample size and missing-data generation mechanism. Each data set was analyzed with three statistical methods. The influence of missing data was greater with higher proportion of missing data and smaller sample size. MMRM tended to show least changes in the statistics. When missing values were generated by 'missing not at random' mechanism, no statistical methods could fully avoid deviations in the results. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Experience of Anti-VEGF Treatment and Clinical Levels of Depression and Anxiety in Patients With Wet Age-Related Macular Degeneration.

    PubMed

    Senra, Hugo; Balaskas, Konstantinos; Mahmoodi, Neda; Aslam, Tariq

    2017-05-01

    To investigate detailed patient experiences specific to receiving vascular endothelial growth factor inhibitors (anti-VEGF) for wet age-related macular degeneration (wAMD), and to acquire a snapshot of the frequency of clinically significant levels of depression, anxiety, and posttraumatic stress among patients and levels of burden in patients' carers. Observational cross-sectional mixed-methods study. Three hundred patients with wAMD receiving anti-VEGF treatment and 100 patient carers were recruited. Qualitative data on patients' experience of treatment were collected using a structured survey. Standardized validated questionnaires were used to quantify clinically significant levels of anxiety, depression, and posttraumatic stress, as well as cognitive function and carers' burden. Qualitative data showed that 56% of patients (n = 132) reported anxiety related to anti-VEGF treatment. The main sources of anxiety were fear of going blind owing to intravitreal injections and concerns about treatment effectiveness, rather than around pain. From validated questionnaires, 17% of patients (n = 52) showed clinical levels of anxiety and 12% (n = 36) showed clinical levels of depression. Depression levels, but not anxiety, were significantly higher in patients who received up to 3 injections compared with patients who received from 4 to 12 injections (analysis of variance [ANOVA] P = .027) and compared with patients who received more than 12 injections (ANOVA P = .001). Anti-VEGF treatment is often experienced with some anxiety related to treatment, regardless of the number of injections received. Clinical levels of depression seem to be more frequent in patients at early stages of anti-VEGF treatment. Strategies to improve patient experience of treatment and minimize morbidity are suggested. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  8. Comparison of the frictional characteristics of aesthetic orthodontic brackets measured using a modified in vitro technique

    PubMed Central

    Arici, Nursel

    2015-01-01

    Objective The coefficients of friction (COFs) of aesthetic ceramic and stainless steel brackets used in conjunction with stainless steel archwires were investigated using a modified linear tribometer and special computer software, and the effects of the bracket slot size (0.018 inches [in] or 0.022 in) and materials (ceramic or metal) on the COF were determined. Methods Four types of ceramic (one with a stainless steel slot) and one conventional stainless steel bracket were tested with two types of archwire sizes: a 0.017 × 0.025-in wire in the 0.018-in slots and a 0.019 × 0.025-in wire in the 0.022-in slot brackets. For pairwise comparisons between the 0.018-in and 0.022-in slot sizes in the same bracket, an independent sample t-test was used. One-way and two-way analysis of variance (ANOVA) and Tukey's post-hoc test at the 95% confidence level (α = 0.05) were also used for statistical analyses. Results There were significant differences between the 0.022-in and 0.018-in slot sizes for the same brand of bracket. ANOVA also showed that both slot size and bracket slot material had significant effects on COF values (p < 0.001). The ceramic bracket with a 0.022-in stainless steel slot showed the lowest mean COF (µ = 0.18), followed by the conventional stainless steel bracket with a 0.022-in slot (µ = 0.21). The monocrystalline alumina ceramic bracket with a 0.018-in slot had the highest COF (µ = 0.85). Conclusions Brackets with stainless steel slots exhibit lower COFs than ceramic slot brackets. All brackets show lower COFs as the slot size increases. PMID:25667915

  9. Oxygen Saturation of Retinal Vessels in All Stages of Diabetic Retinopathy and Correlation to Ultra-Wide Field Fluorescein Angiography.

    PubMed

    Guduru, Abhilash; Martz, Teresa G; Waters, Alexa; Kshirsagar, Abhijit V; Garg, Seema

    2016-10-01

    The purpose of this study was to determine retinal hemoglobin oxygen saturation (SO2) in patients with diabetic retinopathy (DR) using retinal oximetry (RO) and to correlate the degree of retinal ischemia using intravenous fluorescein angiography (IVFA). This is a single-center cross-sectional cohort study. Twenty-seven controls and 60 adult patients with diabetes mellitus (16 without DR and 44 with DR) were enrolled. Patients were stratified according to DR severity. Using RO, SO2 was measured in major retinal arterioles (SaO2) and venules (SvO2). Using IVFA, the percentage of retinal ischemia in 31 patients with DR was calculated and correlated with RO. Pairwise one-way analysis of variance (ANOVA) showed a significant increase in SaO2 and SvO2 in patients with proliferative DR (PDR) compared with controls (SaO2: PDR, 100 ± 7% vs. controls, 91 ± 4% [P = 0.003]; SvO2: PDR, 66 ± 11% vs. controls, 53 ± 6% [P < 0.00001]). The percentage of retinal ischemia also increased with DR severity: ANOVA showed a significant difference in retinal ischemia between all categories of nonproliferative DR vs. PDR: 2.31 ± 2% vs. 7.92 ± 9% (P = 0.017), respectively. Pearson two-tailed correlation showed significant correlation between SaO2 and ischemia (R = 0.467, P = 0.011). Hemoglobin oxygen saturation of retinal arterioles and venules increases with DR severity; SaO2 correlates with increasing ischemia measured by IVFA. Retinal oximetry may complement current imaging strategies to noninvasively augment the diagnosis and risk stratification of patients with diabetes.

  10. Is there a first night effect on sleep bruxism? A sleep laboratory study.

    PubMed

    Hasegawa, Yoko; Lavigne, Gilles; Rompré, Pierre; Kato, Takafumi; Urade, Masahiro; Huynh, Nelly

    2013-11-15

    Sleep bruxism (SB) is reported to vary in frequency over time. The aim of this study was to assess the first night effect on SB. A retrospective polysomnographic (PSG) analysis was performed of data from a sample of SB patients (12 females, 4 males; age range: 17-39 years) recorded in a sleep laboratory over 2 consecutive nights. Sleep parameters and jaw muscle activity variables (i.e., rhythmic masticatory muscle activity [RMMA]) for SB were quantified and compared between the 2 nights. Subjects were classified into groups according to severity of RMMA frequency, such as low frequency (2-4 episodes/h and/or < 25 bursts/h) and moderate-high frequency (≥ 4 episodes/h and ≥ 25 bursts/h). Overall, no first night effects were found for most sleep variables. However, total sleep time, sleep efficiency, and stage transitions showed significant time and group interactions (repeated measures ANOVAs, p ≤ 0.05). The RMMA episode index did not differ between the 2 nights, whereas the second night showed significantly higher burst index, bruxism time index, and mean burst duration (repeated measure ANOVAs, p ≤ 0.05). Five patients of 8 in the low frequency group were classified into the moderate-high frequency group on the second night, whereas only one patient in the moderate-high frequency group moved to the low frequency group. The results showed no overall first night effect on severity of RMMA frequency in young and healthy patients with SB. In clinical practice, one-night sleep recording may be sufficient for moderate-high frequency SB patients. However, low RMMA frequency in the first night could be confirmed by a second night based on the patient's medical and dental history.

  11. An investigation of the effects of therapeutic touch plan on acute chemotherapy-induced nausea in women with breast cancer in Isfahan, Iran, 2012–2013

    PubMed Central

    Matourypour, Pegah; Zare, Zahra; Mehrzad, Valiolah; Musarezaie, Amir; Dehghan, Mojtaba; Vanaki, Zohre

    2015-01-01

    Introduction: Nausea is the worst and most prevalent chemotherapy-induced complication experienced by 70–80% of patients despite mediation therapy. Reduction of nausea is one of the most important roles of oncologist nurses. Today, complementary therapies in addition to classic medicine, because of their lower costs, receive much attention. Nonetheless, their safety and effectiveness are not yet proven. The purpose of this research was to investigate the effect of therapeutic touch plan as a complementary therapy on acute nausea in women with breast cancer in 2012–2013 in Isfahan, Iran. Materials and Methods: A quasi-experimental, single-blind, randomized control trial with three groups (control, placebo and intervention) was performed at the Isfahan Seyedolshohada (AS) Teaching Hospital, Isfahan, in 2012–2013. The intervention was therapeutic touch plan on women with breast cancer, with the three groups receiving the same medicine regimen. Information was recorded by a checklist after infusion of chemotherapy drugs. Data analysis was performed by SPSS, ANOVA and Kruskal–Wallis tests. Results: The ANOVA test showed that the therapeutic touch plan was significantly effective in reducing the duration of nausea compared with the control and placebo groups (P < 0.001). The Kruskal–Wallis test showed that the frequency of occurrence of nausea was also reduced in the intervention and placebo groups compared with the control group (P < 0.001). The therapeutic touch plan was significantly effective in delaying the onset of nausea compared with the control and placebo groups (P < 0.001). Conclusion: This research showed that the therapeutic touch plan is effective in reducing acute chemotherapy-induced nausea; thus, education and implementation of the therapeutic touch plan is proposed for clinical nurses. PMID:26430688

  12. An investigation of the effects of therapeutic touch plan on acute chemotherapy-induced nausea in women with breast cancer in Isfahan, Iran, 2012-2013.

    PubMed

    Matourypour, Pegah; Zare, Zahra; Mehrzad, Valiolah; Musarezaie, Amir; Dehghan, Mojtaba; Vanaki, Zohre

    2015-01-01

    Nausea is the worst and most prevalent chemotherapy-induced complication experienced by 70-80% of patients despite mediation therapy. Reduction of nausea is one of the most important roles of oncologist nurses. Today, complementary therapies in addition to classic medicine, because of their lower costs, receive much attention. Nonetheless, their safety and effectiveness are not yet proven. The purpose of this research was to investigate the effect of therapeutic touch plan as a complementary therapy on acute nausea in women with breast cancer in 2012-2013 in Isfahan, Iran. A quasi-experimental, single-blind, randomized control trial with three groups (control, placebo and intervention) was performed at the Isfahan Seyedolshohada (AS) Teaching Hospital, Isfahan, in 2012-2013. The intervention was therapeutic touch plan on women with breast cancer, with the three groups receiving the same medicine regimen. Information was recorded by a checklist after infusion of chemotherapy drugs. Data analysis was performed by SPSS, ANOVA and Kruskal-Wallis tests. The ANOVA test showed that the therapeutic touch plan was significantly effective in reducing the duration of nausea compared with the control and placebo groups (P < 0.001). The Kruskal-Wallis test showed that the frequency of occurrence of nausea was also reduced in the intervention and placebo groups compared with the control group (P < 0.001). The therapeutic touch plan was significantly effective in delaying the onset of nausea compared with the control and placebo groups (P < 0.001). This research showed that the therapeutic touch plan is effective in reducing acute chemotherapy-induced nausea; thus, education and implementation of the therapeutic touch plan is proposed for clinical nurses.

  13. The decrease of cylindrical pempek quality during boiling

    NASA Astrophysics Data System (ADS)

    Karneta, R.; Gultom, N. F.

    2017-09-01

    The research objective was to study the effects of temperature and formulation on quality of pempek lenjer during boiling. Treatments in this study were four levels of pempek formulation and five levels of temperature. Data was processed by using analysis of variance (Anova). If test results showed that samples were significantly different or highly significantly different, then further test was conducted by using Honestly Significant Different. The results showed that chemical analysis showed that fish dominant formula of cylindrical pempek had higher water content, protein content, lipid content and ash content than that of tapioca starch dominant formula, but it had lower carbohydrate content and fibre content than that of tapioca starch dominant formula.The higher the temperature at center point of cylindrical pempek, the lower the chemical quality of cylindrical pempek. The effect of formula on physical quality of cylindrical pempek showed that tapioca starch dominant formula had more rubbery texture, more neutral pH and brighter color than that of fish dominant formula.The temperature change had no significant effect on texture and pH of cylindrical pempek, but it had significant effect on lightness, intensity and chromatic color especially after exceeding optimum time of boiling.

  14. Enamel Wetness Effects on Microshear Bond Strength of Different Bonding Agents (Adhesive Systems): An in vitro Comparative Evaluation Study.

    PubMed

    Kulkarni, Girish; Mishra, Vinay K

    2016-05-01

    The purpose of this study was to compare the effect of enamel wetness on microshear bond strength using different adhesive systems. To evaluate microshear bond strength of three bonding agents on dry enamel; to evaluate microshear bond strength of three bonding agents on wet enamel; and to compare microshear bond strength of three different bonding agents on dry and wet enamel. Sixty extracted noncarious human premolars were selected for this study. Flat enamel surfaces of approximately 3 mm were obtained by grinding the buccal surfaces of premolars with water-cooled diamond disks. This study evaluated one etch-and-rinse adhesive system (Single Bond 2) and two self-etching adhesive systems (Clearfil SE Bond and Xeno-V). The specimens were divided into two groups (n = 30). Group I (dry) was air-dried for 30 seconds and in group II (wet) surfaces were blotted with absorbent paper to remove excess water. These groups were further divided into six subgroups (n = 10) according to the adhesives used. The resin composite, Filtek Z 250, was bonded to flat enamel surfaces that had been treated with one of the adhesives, following the manufacturer's instructions. After being stored in water at 37°C for 24 hours, bonded specimens were stressed in universal testing machine (Fig. 3) at a crosshead speed of 1 mm/min. The data were evaluated with one-way and two-way analysis of variance (ANOVA), t-test, and Tukey's Multiple Post hoc tests (a = 0.05). The two-way ANOVA and Tukey's Multiple Post hoc tests showed significant differences among adhesive systems, but wetness did not influence microshear bond strength (p = 0.1762). The one-way ANOVA and t-test showed that the all-in-one adhesive (Xeno-V) was the only material influenced by the presence of water on the enamel surface. Xeno-V showed significantly higher microshear bond strength when the enamel was kept wet. Single Bond 2 adhesive showed significantly higher microshear bond strength as compared with Xeno-V adhesive but no significant difference when compared with Clearfil SE Bond adhesive in dry enamel. Single Bond 2 adhesive showed no significant difference in microshear bond strength as compared with self-etching adhesive systems (Clearfil SE Bond and Xeno-V), when the enamel was kept wet. From the findings of the results, it was concluded that self-etching adhesives were not negatively affected by the presence of water on the enamel surface. The all-in-one adhesive showed different behavior depending on whether the enamel surface was dry or wet. So the enamel surface should not be desiccated, when self-etching adhesives are used.

  15. Effect of ethanolic fruit extract of Cucumis trigonus Roxb. on antioxidants and lipid peroxidation in urolithiasis induced wistar albino rats

    PubMed Central

    Balakrishnan, A.; Kokilavani, R; Gurusamy, K.; Teepa, K. S. Ananta; Sathya, M.

    2011-01-01

    Urolithiasis was induced using ethylene glycol in wistar albino rats, the formation of calcium stones in the kidney results with the damage of antioxidant system. Ethanolic extract of Cucumis trigonus Roxb fruit of family Curcurbitaceae was used to treat urolithiasis. On this course, the extract also repairs the changes that happened in the enzymatic, non enzymatic antioxidants and lipid peroxidation in liver and kidney of urolithiasis induced rats. The results obtained from the analysis were compared at 5% level of significance using one way ANOVA. The results show that the ethanolic fruit extract has repaired the levels of antioxidants and malondialdehyde to their normal levels. PMID:22736884

  16. Vehicle operation characteristic under different ramp entrance conditions in underground road: Analysis, simulation and modelling

    NASA Astrophysics Data System (ADS)

    Yao, Qiming; Liu, Shuo; Liu, Yang

    2018-05-01

    An experimental design was used to study the vehicle operation characteristics of different ramp entrance conditions in underground road. With driving simulator, the experimental scenarios include left or right ramp with first, second and third service level, respectively, to collect vehicle speed, acceleration, lateral displacement and location information at the ramp entrance section. By using paired t-test and ANOVA, the influence factors of vehicle operating characteristics are studied. The result shows that effects of ramp layout and mainline traffic environment on vehicle operation characteristics are significant. The regression model of vehicle traveling distance on acceleration lane is established. Suggestions are made for ramp entrance design of underground road.

  17. The relationship investigation between factors affecting demand for broadband and the level of satisfaction among broadband customers in the South East Coast of Sabah, Malaysia

    NASA Astrophysics Data System (ADS)

    Hashim, S. H. A.; Hamid, F. A.; Kiram, J. J.; Sulaiman, J.

    2017-09-01

    This paper aims to investigate the relationship between factors that affecting the demand for broadband and the level of satisfaction. Previous researchers have found that the adoption of broadband is greatly influenced by many factors. Thus, in this study, a self-administered questionnaire was developed to obtain the factors affecting demand for broadband among broadband customers as well as their level of satisfaction. Pearson correlation, one-way analysis of variance (ANOVA) and t-test were used for statistical interpretation of the relationship. This study shows that there are better relationships between several factors over demand for broadband and satisfaction level.

  18. Yeast and Macroinvertebrate Communities Associated with Leaf Litter Decomposition in a Second Order Stream

    NASA Astrophysics Data System (ADS)

    Sampaio, Ana; Cortes, Rui; Leão, Cecília

    2004-11-01

    The composition of yeast and macroinvertebrate communities was studied on black alder, blue gum eucalyptus and English oak leaves decaying in a stream during a six-month period. ANOVA analysis showed significantly different values (p < 0.0001) of yeast and macroinvertebrate densities among the three leaf litters. Some yeast species such as Cryptococcus albidus (Saito), C. laurentii (Kufferath), Rhodothorula glutinis (Fresenius), R. colostri (Castelli), and Debaryomyces hansenii (Lodder and Kreger-van Rij) were present in all litter types. Other yeasts were restricted to a specific type of litter. Macroinvertebrates were dominated by collectors-gatherers on oak and eucalyptus leaves. Shredders reached highest densities in alder leaves. (

  19. Work-related musculoskeletal disorders, job stressors and gender responses in foundry industry.

    PubMed

    Sharma, Rohit; Singh, Ranjit

    2014-01-01

    The main aim of this paper was to identify job stressors, gender responses and association of psychosocial work stressors with prevalence of work related musculoskeletal disorders (MSDs) among foundry workers. The data were obtained with ergonomics checklist using Likert scale. The results of this study showed a high prevalence of MSDs among workers. The male workers were more prone to pain in neck while the female workers were more prone to MSDs in upper back and shoulders. Correlation analysis showed significant relationship of dimensions of work aspects with pain and discomfort. It proved that the work-related MSDs are the results of interaction of multiple stressors associated with work and work environment, and other personal factors. ANOVA indicated that the perception of work aspects as stressors differed significantly between male and female workers.

  20. Effect of bentonite modification on hardness and mechanical properties of natural rubber nanocomposites

    NASA Astrophysics Data System (ADS)

    Santiago, Denise Ester O.; Pajarito, Bryan B.; Mangaccat, Winna Faye F.; Tigue, Maelyn Rose M.; Tipton, Monica T.

    2016-05-01

    The effect of sodium activation, ion-exchange with tertiary amine salt, surface treatment with non-ionic surfactant, and wet grinding of bentonite on hardness and mechanical properties of natural rubber nanocomposites (NRN) was studied using full factorial design of experiment. Results of X-ray diffraction (XRD) show increase in basal spacing d of bentonite due to modification, while attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) confirm the organic modification of bentonite. Analysis of variance (ANOVA) shows that the main effect of surface treatment increases the hardness and decreases the tensile modulus of the NRN. The surface treatment and wet grinding of bentonite decrease the tensile stresses at 100, 200 and 300% strain of NRN. Sodium activation and ion-exchange negatively affect the compressive properties, while surface treatment significantly improves the compressive properties of NRN.

  1. Chaperones CCS, ATOX and COXIV responses to copper supplementation in healthy adults.

    PubMed

    Araya, Magdalena; Andrews, Monica; Pizarro, Fernando; Arredondo, Miguel

    2012-04-01

    Assessment of proteins in blood and other tissues has failed to identify markers of early copper effects on health. Studies in animal models show that chaperone of SOD (CCS) respond to changes of copper status. Evidence about other copper chaperones (COXIV, ATOX) is not clear. The aim of this study was to assess by means of an in vitro challenge the mRNA relative abundance of ccs, sod1, coxIV, mtIIa and atox in peripheral mononuclear cells (PMNCs) obtained from healthy individuals, acutely and chronically supplemented with small-to-moderate amounts of copper. Healthy participants received 8 mg Cu/d (supplemented group, SG) or placebo, (placebo group, PG) for 2 months. Biochemical indicators were assessed at basal (T0) and after 2 (T2) and 60 days (T60). At these times PMNCs were obtained, challenged with 1, 5 or 20 μM Cu-histidine for 20 h and the mRNA relative abundance of the selected genes assessed by real time PCR. The results showed that at T0, intracellular copper was not different between experimental and control groups. This increased at T2 and T60 when the copper in the media increased (two-way ANOVA, P < 0.001). In PG, CCS mRNA transcripts showed no significant changes (two-way ANOVA) at T2 and T60. In SG, CCS changed by treatment, time and interaction (two-way ANOVA, all P < 0.001). SOD, ATOX and COXIV expressions changed in both PG and SG showing various patterns of response, requiring further study. MTII responded as expected. We conclude that using healthy individuals as a human model, CCS but not SOD, ATOX or COXIV responded consistently to controlled changes of copper availability in an in vitro copper challenge.

  2. Randomized trial of the effect of contact lens wear on self-perception in children.

    PubMed

    Walline, Jeffrey J; Jones, Lisa A; Sinnott, Loraine; Chitkara, Monica; Coffey, Bradley; Jackson, John Mark; Manny, Ruth E; Rah, Marjorie J; Prinstein, Mitchell J

    2009-03-01

    To determine whether contact lens wear affects children's self-perceptions. The Adolescent and Child Health Initiative to Encourage Vision Empowerment Study was a randomized, single-masked trial conducted at five clinical centers in the United States. Subjects were 8- to 11-year-old myopic children randomly assigned to wear spectacles (n = 237) or soft contact lenses (n = 247) for 3 years. The primary endpoint was the Self-Perception Profile for Children Global Self-Worth scale. Secondary outcomes included the Physical Appearance, Athletic Competence, Scholastic Competence, Behavioral Conduct, and Social Acceptance Self-Perception Profile for Children scales. Global self-worth was not affected by contact lens wear [analysis of variance (ANOVA), difference = 0.06; 95% CI, -0.004 to 0.117]. Physical appearance (ANOVA, difference = 0.15; 95% CI, 0.07 to 0.22), athletic competence (ANOVA, difference = 0.08; 95% CI, 0.01 to 0.15), and social acceptance (ANOVA, difference = 0.10; 95% CI, 0.03 to 0.17) were all greater for contact lens wearers. Although contact lens wear does not affect global self-perceptions of 8- to 11-year-old myopic children their physical appearance, athletic competence, and social acceptance self-perceptions are likely to improve with contact lens wear. Eye care practitioners should consider the social and visual benefits of contact lens wear when choosing the most appropriate vision correction modality for children as young as 8 years of age.

  3. Statistical Tutorial | Center for Cancer Research

    Cancer.gov

    Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data.  ST is designed as a follow up to Statistical Analysis of Research Data (SARD) held in April 2018.  The tutorial will apply the general principles of statistical analysis of research data including descriptive statistics, z- and t-tests of means and mean differences, simple and multiple linear regression, ANOVA tests, and Chi-Squared distribution.

  4. [Anxiety in eating disorders: a comparative study].

    PubMed

    Solano Pinto, Natalia; Cano Vindel, Antonio

    2012-01-01

    Scientific literature shows that anxiety is an important factor in eating disorders. The aim of this case-control study was to compare the anxiety manifestations obtained by means of the Anxiety Situations and Responses Inventory of in a clinical sample of 74 females (46, anorexia nervosa; 28, bulimia) to those obtained by a control group (130 girls without disorders). The between-group ANOVA results showed higher anxiety scores in the clinical group with a medium effect size for the anxiety trait, finding a flat profile (within-group ANOVA) for the three response systems (cognitive, physiological and motor) and the four specific anxiety traits (test, interpersonal, phobic, and daily life situations). Moreover, high scores in anxiety involved a greater risk of being diagnosed with an eating disorder in the 8 bivariate comparisons. The estimations were more precise for cognitive anxiety and for the specific interpersonal anxiety trait.

  5. Phonological awareness intervention and attention efficiency in children at risk: evidence of effectiveness on visual attention.

    PubMed

    Porta, María Elsa; Carrada, Mariana Andrea; Ison, Mirta Susana

    2016-05-31

    Using a pretest and posttest comparison group design, this 20 weeks study investigated the effects of a phonological awareness training program (PATP) on attention efficiency (AE) in 57 children (age = 5 to 6 years) at risk. The experimental group received the PATP (EG; n=30). We obtained pretest and posttest measures of phonological awareness and AE. The ANOVA showed significant interaction effects of the PATP and time on phonological awareness and AE. For both groups, posttest AE score means were higher than pretest score means. Pretest measures showed that the AE score mean for the EG was lower than that for the Control Group (CG; n=31); whereas posttest data showed no between group differences. Contrast analysis showed that the EG gained a greater level of phonological awareness ability and AE over CG. Our results indicate that children's attention efficiency not only improved as they developed, but also increased by means of a PATP.

  6. Monte Carlo simulation of edge placement error

    NASA Astrophysics Data System (ADS)

    Kobayashi, Shinji; Okada, Soichiro; Shimura, Satoru; Nafus, Kathleen; Fonseca, Carlos; Estrella, Joel; Enomoto, Masashi

    2018-03-01

    In the discussion of edge placement error (EPE), we proposed interactive pattern fidelity error (IPFE) as an indicator to judge pass/fail of integrated patterns. IPFE consists of lower and upper layer EPEs (CD and center of gravity: COG) and overlay, which is decided from the combination of each maximum variation. We succeeded in obtaining the IPFE density function by Monte Carlo simulation. In the results, we also found that the standard deviation (σ) of each indicator should be controlled by 4.0σ, at the semiconductor grade, such as 100 billion patterns per die. Moreover, CD, COG and overlay were analyzed by analysis of variance (ANOVA); we can discuss all variations from wafer to wafer (WTW), pattern to pattern (PTP), line edge roughness (LWR) and stochastic pattern noise (SPN) on an equal footing. From the analysis results, we can determine that these variations belong to which process and tools. Furthermore, measurement length of LWR is also discussed in ANOVA. We propose that the measurement length for IPFE analysis should not be decided to the micro meter order, such as >2 μm length, but for which device is actually desired.

  7. Multivariate analysis of variance of designed chromatographic data. A case study involving fermentation of rooibos tea.

    PubMed

    Marini, Federico; de Beer, Dalene; Walters, Nico A; de Villiers, André; Joubert, Elizabeth; Walczak, Beata

    2017-03-17

    An ultimate goal of investigations of rooibos plant material subjected to different stages of fermentation is to identify the chemical changes taking place in the phenolic composition, using an untargeted approach and chromatographic fingerprints. Realization of this goal requires, among others, identification of the main components of the plant material involved in chemical reactions during the fermentation process. Quantitative chromatographic data for the compounds for extracts of green, semi-fermented and fermented rooibos form the basis of preliminary study following a targeted approach. The aim is to estimate whether treatment has a significant effect based on all quantified compounds and to identify the compounds, which contribute significantly to it. Analysis of variance is performed using modern multivariate methods such as ANOVA-Simultaneous Component Analysis, ANOVA - Target Projection and regularized MANOVA. This study is the first one in which all three approaches are compared and evaluated. For the data studied, all tree methods reveal the same significance of the fermentation effect on the extract compositions, but they lead to its different interpretation. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. A Comparative Study of Shaping Ability of four Rotary Systems.

    PubMed

    Rubio, Jorge; Zarzosa, José Ignacio; Pallarés, Antonio

    2015-12-01

    This study compared the cutting area, instrumentation time, root canal anatomy preservation and non-instrumented areas obtained by F360(®), Mtwo(®), RaCe(®) and Hyflex(®) files with ISO size 35. 120 teeth with a single straight root and root canal were divided into 4 groups. Working length was calculated by using X-rays. The teeth were sectioned with a handpiece and a diamond disc, and the sections were observed with Nikon SMZ-2T stereoscopic microscope and an Intralux 4000-1 light source. The groups were adjusted with a preoperative analysis with AutoCAD. The teeth were reconstructed by a #10 K-File and epoxy glue. Each group was instrumented with one of the four file systems. The instrumentation time was calculated with a 1/100 second chronometer. The area of the thirds and root canal anatomy preservation were analyzed with AutoCAD 2013 and the non-instrumented areas with AutoCAD 2013 and SMZ-2T stereoscopic microscope. The statistical analysis was made with Levene's Test, ANOVA, Bonferroni Test and Pearson´s Chi-square. Equal variances were shown by Levene's Test (P > 0.05). ANOVA (P > 0.05) showed the absence of significant differences. There were significant differences in the instrumentation time (P < 0.05). For root canal anatomy preservation and non-instrumented areas, there were no significant differences between all systems (P > 0.05). The 4 different rotary systems produced similar cutting area, root canal anatomy preservation and non-instrumented areas. Regarding instrumentation time, F360(®) was the fastest system statistically.

  9. A Comparative Study of Shaping Ability of four Rotary Systems

    PubMed Central

    Zarzosa, José Ignacio; Pallarés, Antonio

    2015-01-01

    Purpose This study compared the cutting area, instrumentation time, root canal anatomy preservation and non-instrumented areas obtained by F360®, Mtwo®, RaCe® and Hyflex® files with ISO size 35. Material and Methods 120 teeth with a single straight root and root canal were divided into 4 groups. Working length was calculated by using X-rays. The teeth were sectioned with a handpiece and a diamond disc, and the sections were observed with Nikon SMZ-2T stereoscopic microscope and an Intralux 4000-1 light source. The groups were adjusted with a preoperative analysis with AutoCAD. The teeth were reconstructed by a #10 K-File and epoxy glue. Each group was instrumented with one of the four file systems. The instrumentation time was calculated with a 1/100 second chronometer. The area of the thirds and root canal anatomy preservation were analyzed with AutoCAD 2013 and the non-instrumented areas with AutoCAD 2013 and SMZ-2T stereoscopic microscope. The statistical analysis was made with Levene’s Test, ANOVA, Bonferroni Test and Pearson´s Chi-square. Results Equal variances were shown by Levene’s Test (P > 0.05). ANOVA (P > 0.05) showed the absence of significant differences. There were significant differences in the instrumentation time (P < 0.05). For root canal anatomy preservation and non-instrumented areas, there were no significant differences between all systems (P > 0.05). Conclusions The 4 different rotary systems produced similar cutting area, root canal anatomy preservation and non-instrumented areas. Regarding instrumentation time, F360® was the fastest system statistically. PMID:27688412

  10. Work Ability Index (WAI) and its health-related determinants among Iranian farmers working in small farm enterprises.

    PubMed

    Rostamabadi, Akbar; Mazloumi, Adel; Rahimi Foroushani, Abbas

    2014-01-01

    This study aimed to determine the Work Ability Index (WAI) and examine the influence of health dimensions and demographic variables on the work ability of Iranian farmers working in small farm enterprises. A cross-sectional study was conducted among 294 male farmers. The WAI and SF-36 questionnaires were used to determine work ability and health status. The effect of demographics variables on the work ability index was investigated with the independent samples t-test and one-way ANOVA. Also, multiple linear regression analysis was used to test the association between the mean WAI score and the SF-36 scales. The mean WAI score was 35.1 (SD=10.6). One-way ANOVA revealed a significant relationship between the mean WAI and age. Multiple linear regression analysis showed that work ability was more influenced by physical scales of the health dimensions, such as physical function, role-physical, and general health, whereas a lower association was found for mental scales such as mental health. The average WAI was at a moderate work ability level for the sample population of farmers in this study. Based on the WAI guidelines, improvement of work ability and identification of factors affecting it should be considered a priority in interventional programs. Given the influence of health dimensions on WAI, any intervention program for preservation and promotion of work ability among the studied farmers should be based on balancing and optimizing the physical and psychosocial work environments, with a special focus on reducing physical work load.(J Occup Health 2014; 56: 478-484).

  11. Long-term experimental warming alters nitrogen-cycling communities but site factors remain the primary drivers of community structure in high arctic tundra soils.

    PubMed

    Walker, Jennifer K M; Egger, Keith N; Henry, Gregory H R

    2008-09-01

    Arctic air temperatures are expected to rise significantly over the next century. Experimental warming of arctic tundra has been shown to increase plant productivity and cause community shifts and may also alter microbial community structure. Hence, the objective of this study was to determine whether experimental warming caused shifts in soil microbial communities by measuring changes in the frequency, relative abundance and/or richness of nosZ and nifH genotypes. Five sites at a high arctic coastal lowland were subjected to a 13-year warming experiment using open-top chambers (OTCs). Sites differed by dominant plant community, soil parent material and/or moisture regimen. Six soil cores were collected from each of four replicate OTC and ambient plots at each site and subdivided into upper and lower samples. Differences in frequency and relative abundance of terminal restriction fragments were assessed graphically by two-way cluster analysis and tested statistically with permutational multivariate analysis of variance (ANOVA). Genotypic richness was compared using factorial ANOVA. The genotype frequency, relative abundance and genotype richness of both nosZ and nifH communities differed significantly by site, and by OTC treatment and/or depth at some sites. The site that showed the most pronounced treatment effect was a wet sedge meadow, where community structure and genotype richness of both nosZ and nifH were significantly affected by warming. Although warming was an important factor affecting these communities at some sites at this high arctic lowland, overall, site factors were the main determinants of community structure.

  12. Power analysis for multivariate and repeated measurements designs via SPSS: correction and extension of D'Amico, Neilands, and Zambarano (2001).

    PubMed

    Osborne, Jason W

    2006-05-01

    D'Amico, Neilands, and Zambarano (2001) published SPSS syntax to perform power analyses for three complex procedures: ANCOVA, MANOVA, and repeated measures ANOVA. Unfortunately, the published SPSS syntax for performing the repeated measures analysis needed some minor revision in order to perform the analysis correctly. This article presents the corrected syntax that will successfully perform the repeated measures analysis and provides some guidance on modifying the syntax to customize the analysis.

  13. Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

    Treesearch

    G.R. Johnson; J.N. King

    1998-01-01

    Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

  14. Impact of physicochemical parameters on phytoplankton compositions and abundances in Selameko Manmade Reservoir, Debre Tabor, South Gondar, Ethiopia

    NASA Astrophysics Data System (ADS)

    Wassie, Tilahun Adugna; Melese, Ayalew Wondie

    2017-07-01

    Impact of physicochemical parameters on 2 compositions and abundances in Selameko Reservoir, Debre Tabor, South Gondar from August 2009 to May 2010 was assessed. Water quality parameters, such as temperature, water transparency, water depth, dissolved oxygen, pH, total dissolved solids, phosphate, nitrate, and silicate were measured in situ from two sites (littoral and open water zone) of the reservoir. Phytoplankton compositions and abundances were analyzed in Tana fisheries and other aquatic organisms' research center. ANOVA result of the physicochemical parameters included chlorophyll-a showed the presence of significance difference among seasons and between sites ( P < 0.05). A total of seven families, 36 genera from three groups (Diatom, Blue green algae and Green algae) of phytoplankton were identified during the study period. From all groups, diatoms were the most abundant at both sites and Blue green algae were the least abundant. ANOVA of all phytoplankton showed highly significant difference among seasons and between sites ( P < 0.05). ANOVA of all phytoplankton showed highly significant difference among seasons and between sites ( P < 0.05). Based on the stepwise regression, a total number of phytoplanktons had positive correlation with some of the physicochemical parameters (R2 = 0.99, P < 0.001, N = 16). The study concluded that some of physicochemical parameters (NO3-N and PO4-P) indicated the presence of reservoir water pollution. This is supported by the presence of pollution-resistant phytoplankton species such as Melosira and Microcystis. The reservoir water was eutrophic (productive) throughout the year. To avoid such pollution, basin and reservoir management are recommended.

  15. Life expectancy evaluation and development of a replacement schedule for LED traffic signals.

    DOT National Transportation Integrated Search

    2011-03-01

    This research details a field study of LED traffic signals in Missouri and develops a replacement schedule : based on key findings. Rates of degradation were statistically analyzed using Analysis of Variance : (ANOVA). Results of this research will p...

  16. Technical note: Application of the Box-Cox data transformation to animal science experiments.

    PubMed

    Peltier, M R; Wilcox, C J; Sharp, D C

    1998-03-01

    In the use of ANOVA for hypothesis testing in animal science experiments, the assumption of homogeneity of errors often is violated because of scale effects and the nature of the measurements. We demonstrate a method for transforming data so that the assumptions of ANOVA are met (or violated to a lesser degree) and apply it in analysis of data from a physiology experiment. Our study examined whether melatonin implantation would affect progesterone secretion in cycling pony mares. Overall treatment variances were greater in the melatonin-treated group, and several common transformation procedures failed. Application of the Box-Cox transformation algorithm reduced the heterogeneity of error and permitted the assumption of equal variance to be met.

  17. Effects of Single-Gender Middle School Classes on Science Achievement and Attitude

    NASA Astrophysics Data System (ADS)

    Brooks, Tanisha

    Many girls continue to achieve below their male counterparts and portray negative attitudes towards science classes. Some school districts are using single-gender education as a way to shrink the gender gap in school achievement and science related attitude. The purpose of this study was to compare achievement and science-related attitudes of 7th grade girls in single-gender education to 7th grade girls in mixed-gender education. The theoretical base for this study included knowledge from brain-based learning and assimilation, accommodation and age factors of Piaget's theory of cognitive development. The 12-week study included 48 7th grade girls, 21 in the single-gender classroom and 14 in each mixed-gender classroom. This quantitative randomized posttest only control group design utilized the TerraNova Science Assessment and the Test of Science Related Attitudes. Analysis of Variance (ANOVA) was used to determine if significant differences existed in the achievement and attitudes of girls in single and mixed-gender science classes. ANOVA analyses revealed that the girls in the single-gender classroom showed a significantly higher achievement level when compared to girls in the mixed-gender classrooms. Results showed no significant difference in attitude between the two groups. The results of this study contribute to social change by raising awareness about gender issues in science achievement and attitude, addressing a deficiency in the single-gender science education literature, and assisting educational systems in decision making to address achievement gaps while moving toward adequate yearly progress and meeting the requirements of the No Child Left Behind Act of 2001.

  18. [The effects of different welding wires on the mechanical properties of laser welding joints].

    PubMed

    Huang, Qing-feng; Zhang, Jian-zhong; Jiang, Wei-dong; Li, Quan; Yu, Jin-xing

    2006-08-01

    To evaluate the mechanical properties and microstructure of laser-welded joints with different welding wires for clinical use of welding wire. The standard tensile test and three-point bending test rods were made from Co-Cr and Ni-Cr alloy, and were laser-welded with different welding wire (commercially welding wire and casting wire). Then the tensile rods were tested for the ultimate tensile strength (UTS), and the bending rods for the ultimate bending strength (UBS). The results was analyzed by one-way ANOVA. The tensile fracture surface were examined by scanning electron microscopy (SEM). Metallurgical analysis were also performed on polished longitudinal sectioned samples. For Co-Cr alloy, the UTS of casting wire group and commercially welding wire group was respectively (606.40+/-82.53)MPa and (693.61+/-47.68)MPa; the UBS was respectively (997.95+/-88.89)MPa and (1160.76+/-91.59)MPa. ANOVA showed a significant difference of UTS and UBS between the two groups at the 0.05 level (P<0.05). For Ni-Cr alloy, the UTS of casting wire group and commercially welding wire group was respectively (558.14+/-46.75)MPa and (582.32+/-35.43)MPa; the UBS was respectively (1084.75+/-46.02)MPa and (1078.29+/-36.25)MPa. There was no significant difference between the two groups (P>0.05). SEM and metallurgical examination showed the welded zone exhibiting more cracks in the casting wire group than in the commercially welding wire group. It would be advisable to work with commercially welding wire for the joints that need better strength.

  19. Photoactivation of curcumin and sodium hypochlorite to enhance antibiofilm efficacy in root canal dentin.

    PubMed

    Neelakantan, Prasanna; Cheng, Cheng Qing; Ravichandran, Vinoddhine; Mao, Teresa; Sriraman, Priyanka; Sridharan, Swetha; Subbarao, Chandana; Sharma, Subash; Kishen, Anil

    2015-03-01

    To test the effect of ultrasonic or light activated curcumin and sodium hypochlorite against Enterococcus faecalis biofilms in vitro. E. faecalis biofilms were grown within root canals (n=175) and divided into 7 groups (n=25). Group 1, sterile saline; group 2, 3% sodium hypochlorite; group 3, 3% sodium hypochlorite activated with ultrasonic files (30s cycles for 4min); group 4, 3% sodium hypochlorite irradiated with blue light (1200mw/cm(2) for 4min); group 5, curcumin (2.5mg/mL); group 6, curcumin (2.5mg/mL) activated with ultrasonic files (30s cycles for 4min); group 7, curcumin (2.5mg/mL) irradiated with blue light. The biofilms' ultrastructure was examined using scanning electron microscopy. Bacterial viability was assessed by confocal microscopy. Data were analyzed by one-way ANOVA and Student-Newman-Keuls test (P=0.05). The quantitative analysis of the colony-forming units was carried out from dentinal shaving and analyzed by One-way ANOVA and Tukey multiple comparison test (P=0.05). All treatment groups showed a significantly higher percentage of dead bacteria than the saline control (P<0.05). The percentage of dead bacteria was significantly higher when light activated curcumin was used (P<0.05). At both depths (200 and 400 microns), light activated curcumin showed no growth of bacteria. Light activation produced significantly higher antibacterial efficacy than ultrasonic agitation, with light activated curcumin producing the maximum elimination of biofilm bacteria within the root canal lumen and dentinal tubules. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Spectral transmittance of UV-blocking soft contact lenses: a comparative study.

    PubMed

    Rahmani, Saeed; Mohammadi Nia, Mohadeseh; Akbarzadeh Baghban, Alireza; Nazari, Mohammad Reza; Ghassemi-Broumand, Mohammad

    2014-12-01

    Three major parts of sunlight consist of visible, ultraviolet and infrared radiation. Exposure to ultraviolet radiation (UVR) can result in a spectrum of skin and ocular diseases. UV-blocking contact lenses help provide protection against harmful UV radiation. We studied the ultraviolet and visible light rays transmission in some soft UV-blocking contact lenses. Four available tinted soft lenses (Acuvue Moist, Zeiss CONTACT Day 30 Air spheric, Pretty Eyes and Sauflon 56 UV) have been evaluated for UV and visible transmission. One-way ANOVA testing was performed to establish is there a statistically significant difference between the UV regions and visible spectra means for the contact lenses (α=0.05). Pretty Eyes, Zeiss CONTACT, Acuvue Moist and Sauflon 56 UV showed UV-B transmittance value of 0.65%, 10.69%, 1.22%, and 5.78%, respectively. Pretty Eyes and Acuvue Moist had UV-A transmittance values of 32% and 34%, Sauflon 56 UV and Zeiss CONTACT had transmittance values of 48% and 43%, respectively. All of the studied lenses transmitted at least 94.6% on the visible spectrum. The results of the one-way ANOVA statistical analysis show that a statistically significant difference exists within the group of contact lenses tested for the visible (p<0.001), UV-B (p<0.001) and UV-A (p<0.001) portions of the spectrum (α=0.05). Acuvue Moist has the best UV-blocking property and also visible transmission between other tested contact lenses in this study. Copyright © 2014 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  1. Contribution of attachment insecurity to health-related quality of life in depressed patients.

    PubMed

    Ponizovsky, Alexander M; Drannikov, Angela

    2013-06-22

    To examine the individual contributions of insecure attachment styles and depression symptom severity to health-related quality of life (HRQoL) in patients diagnosed with adjustment disorder (AJD) with depressed mood. Participants were 67 patients diagnosed with International Classification of Diseases, Tenth edition AJD with depressed mood, who completed standardised self-report questionnaires measuring study variables. Mean scores and SDs were computed for the outcome and predictor measures. Pearson correlations among the measures were computed. The study hypotheses were tested using analysis of variance (ANOVA) and multiple regression analyses. All analyses were performed using the SPSS-17 software package (SPSS Inc., Chicago, IL, United States). ANOVA showed a significant main effect of the insecure attachment styles on depression symptom severity and life satisfaction scores. The results suggest that depressive symptoms were more severe (F = 4.13, df = 2.67, P < 0.05) and life satisfaction was poorer (F = 5.69, df = 2.67, P < 0.01) in both anxious-ambivalently and avoidantly attached patients compared with their securely attached counterparts, whereas the two insecure groups did not significantly differ by these variables. The anxious/ambivalent attachment style and depression symptom severity significantly contributed to HRQoL, accounting for 21.4% and 29.7% of the total variance, respectively [R(2) = 0.79; Adjusted R(2) = 0.77; F (5, 67) = 33.68, P < 0.0001], even after controlling for gender, marital and employment status confounders. The results show that the anxious/ambivalent attachment style together with depression symptom severity substantially and independently predict the HRQoL outcome in AJD with depressed mood.

  2. The effect of repeated torque in small diameter implants with machined and premachined abutments.

    PubMed

    Saboury, Abolfazl; Neshandar Asli, Hamid; Vaziri, Shahram

    2012-05-01

    Detorquing value is an important factor in the amount of preload stresses during abutment screw fastening. This study evaluated the percentage of detorque values in two-piece machined titanium and premachined cast abutments in small diameter implants. Three groups of five samples were evaluated. Group 1 (G1), machined titanium abutments, group 2 (G2), premachined cast straight abutments that cast with gold-palladium, and group 3 (G3), premachined angled cast abutments that cast with the same alloy, were angled before casting. Each abutment was torque to 24 Ncm according to the manufacturer's instructions and detorqued five times. The means of detorquing and torquing values in all groups were recorded. The mean of detorque in each group as a percentage of the toque value was calculated. The data for all groups were compared and calculated using analysis of variance (ANOVA) and t-test. Mean detorque values in G1, G2, and G3 were 88.1 ± 1.69, 93.1 ± 2.68, and 80.9 ± 4.95%, respectively. The ANOVA showed significant differences in mean of applied detorque (p < .001) and torque (p = .06) tightening among different groups. G2 had significantly greater detorque values (p < .05). No significant differences were found between G1 and G2. Surprisingly, abutment screw fracture occurred in three samples of G3. G3 showed significant percentage torque reduction (p < .05) and exhibited abutment screw fracture during evaluation. G2 presented the lowest torque reduction. Screw fracture occurred only in G3. © 2012 Wiley Periodicals, Inc.

  3. Adaptive surrogate modeling by ANOVA and sparse polynomial dimensional decomposition for global sensitivity analysis in fluid simulation

    NASA Astrophysics Data System (ADS)

    Tang, Kunkun; Congedo, Pietro M.; Abgrall, Rémi

    2016-06-01

    The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable for real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.

  4. The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments.

    PubMed

    Pieralini, Anelise R F; Benjamin, Camila M; Ribeiro, Ricardo Faria; Scaf, Gulnara; Adabo, Gelson Luis

    2010-10-01

    This study evaluated the effect of pattern coating with spinel-based investment Rematitan Ultra (RU) on the castability and internal porosity of commercially pure (CP) titanium invested into phosphate-bonded investments. The apparent porosity of the investment was also measured. Square patterns (15 × 15 × 0.3 mm(3)) were either coated with RU, or not and invested into the phosphate-bonded investments: Rematitan Plus (RP), Rema Exakt (RE), Castorit Super C (CA), and RU (control group). The castings were made in an Ar-arc vacuum-pressure machine. The castability area (mm(2) ) was measured by an image-analysis system (n = 10). For internal porosity, the casting (12 × 12 × 2 mm(3) ) was studied by the X-ray method, and the projected porous area percentage was measured by an image-analysis system (n = 10). The apparent porosity of the investment (n = 10) was measured in accordance with the ASTM C373-88 standard. Analysis of variance (One-way ANOVA) of castability was significant, and the Tukey test indicated that RU had the highest mean but the investing technique with coating increased the castability for all phosphate-bonded investments. The analysis of the internal porosity of the cast by the nonparametric test demonstrated that the RP, RE, and CA with coating and RP without coating did not differ from the control group (RU), while the CA and RE casts without coating were more porous. The one-way ANOVA of apparent porosity of the investment was significant, and the Tukey test showed that the means of RU (36.10%) and CA (37.22%) were higher than those of RP (25.91%) and RE (26.02%). Pattern coating with spinel-based material prior to phosphate-bonded investments can influence the castability and the internal porosity of CP Ti. © 2010 by The American College of Prosthodontists.

  5. Effects of UGT1A9 genetic polymorphisms on monohydroxylated derivative of oxcarbazepine concentrations and oxcarbazepine monotherapeutic efficacy in Chinese patients with epilepsy.

    PubMed

    Lu, Yao; Fang, Youxin; Wu, Xunyi; Ma, Chunlai; Wang, Yue; Xu, Lan

    2017-03-01

    The human UDP-glucuronosyltransferase which is genetically polymorphic catalyzes glucuronidations of various drugs. The interactions among UGT1A4, UGT1A6, UGT1A9, and UGT2B15 genetic polymorphisms, monohydroxylated derivative (MHD) of oxcarbazepine (OXC) plasma concentrations, and OXC monotherapeutic efficacy were explored in 124 Chinese patients with epilepsy receiving OXC monotherapy. MHD is the major active metabolite of OXC, and its plasma concentration was measured using high-performance liquid chromatography when patients reached their maintenance dose of OXC. Genomic DNA was extracted from whole blood and SNP genotyping performed using PCR followed by dideoxy chain termination sequencing. We followed the patients for at least 1 year to evaluate the OXC monotherapy efficacy. Patients were divided into two groups according to their therapeutic outcome: group 1, seizure free; group 2, not seizure free. The data were analyzed using T test, one-way analysis of variance (ANOVA), Kruskal-Wallis test, chi-square test, Fisher's exact test, correlation analysis, and multivariate regression analysis. T test analysis showed that MHD plasma concentrations were significantly different between the two groups (p = 0.002). One-way ANOVA followed by Bonferroni post hoc testing of four candidate SNPs revealed that carriers of the UGT1A9 variant allele I399 C > T (TT 13.28 ± 7.44 mg/L, TC 16.41 ± 6.53 mg/L) had significantly lower MHD plasma concentrations and poorer seizure control than noncarriers (CC 22.24 ± 8.49 mg/L, p < 0.05). In our study, we have demonstrated the effects of UGT1A9 genetic polymorphisms on MHD plasma concentrations and OXC therapeutic efficacy. Through MHD monitoring, we can predict OXC therapeutic efficacy, which may be useful for the personalization of OXC therapy in epileptic patients.

  6. Effects of changes in dietary fatty acids on isolated skeletal muscle functions in rats.

    PubMed

    Ayre, K J; Hulbert, A J

    1996-02-01

    The effects of manipulating dietary levels of essential polyunsaturated fatty acids on the function of isolated skeletal muscles in male Wistar rats were examined. Three isoenergetic diets were used: an essential fatty acid-deficient diet (EFAD), a diet high in essential (n-6) fatty acids [High (n-6)], and a diet enriched with essential (n-3) fatty acids [High (n-3)]. After 9 wk, groups of rats on each test diet were fed a stock diet of laboratory chow for a further 6 wk. Muscle function was examined by using a battery of five tests for soleus (slow twitch) and extensor digitorum longus (EDL; fast twitch). Tests included single muscle twitches, sustained tetanic contractions, posttetanic potentiation, sustained high-frequency stimulation, and intermittent low-frequency stimulation. Results for muscles from the High (n-6) and High (n-3) groups were very similar. However, the EFAD diet resulted in significantly lower muscular tensions and reduced response times compared with the High (n-6) and High (n-3) diets. Peak twitch tension in soleus muscles was 16-21% less in the EFAD group than in the High (n-6) and High (n-3) groups, respectively [analysis of variance (ANOVA), P < 0.01). During high-frequency stimulation, EDL muscles from the EFAD rats fatigued 32% more quickly (ANOVA, P < 0.01)]. Also, twitch contraction and half-relaxation times were significantly 5-7% reduced in the EFAD group (ANOVA, P < 0.01). During intermittent low-frequency stimulation, soleus muscles from the EFAD group generated 25-28% less tension than did the other groups (ANOVA, P < 0.01), but in EDL muscles from the EFAD group, endurance was 20% greater than in the High (n-6) group (ANOVA, P < 0.05). After 6 wk on the stock diet, there were no longer any differences between the dietary groups. Manipulation of dietary fatty acids results in significant, but reversible, effects in muscles of rats fed an EFAD diet.

  7. Quality-by-design (QbD): effects of testing parameters and formulation variables on the segregation tendency of pharmaceutical powder measured by the ASTM D 6940-04 segregation tester.

    PubMed

    Xie, Lin; Wu, Huiquan; Shen, Meiyu; Augsburger, Larry L; Lyon, Robbe C; Khan, Mansoor A; Hussain, Ajaz S; Hoag, Stephen W

    2008-10-01

    The objective of this study was to examine the effects of testing parameters and formulation variables on the segregation tendency of pharmaceutical powders measured by the ASTM D 6940-04 segregation tester using design of experiments (DOE) approaches. The test blends consisted of 4% aspirin (ASP) and 96% microcrystalline cellulose (MCC) with and without magnesium stearate (MgS). The segregation tendency of a blend was determined by measuring the last/first (L/F) ratio, the ratio of aspirin concentrations between the first and last samples discharged from the tester. A 2(2) factorial design was used to determine the effects of measurement parameters [amount of material loaded (W), number of segregation cycles] with number of replicates 6. ANOVA showed that W was a critical parameter for segregation testing. The L/F value deviated further from 1 (greater segregation tendency) with increasing W. A 2(3) full factorial design was used to assess the effects of formulation variables: grade of ASP (unmilled, milled), grade of MCC, and amount of lubricant, MgS. MLR and ANOVA showed that the grade of ASP was the main effect contributing to segregation tendency. Principal Component Regression Analysis established a correlation between L/F and the physical properties of the blend related to ASP and MCC, the ASP/MCC particle size ratio (PSR) and powder cohesion. The physical properties of the blend related to density and flow were not influenced by the grade of ASP and were not related to the segregation tendency of the blend. The direct relationship between L/F and PSR was determined by univariate analysis. Segregation tendency increased as the ASP to MCC particle size increased. This study highlighted critical test parameters for segregation testing and identified critical physical properties of the blends that influence segregation tendency. (c) 2008 Wiley-Liss, Inc. and the American Pharmacists Association

  8. Effect of mixing scanner types and reconstruction kernels on the characterization of lung parenchymal pathologies: emphysema, interstitial pulmonary fibrosis and normal non-smokers

    NASA Astrophysics Data System (ADS)

    Xu, Ye; van Beek, Edwin J.; McLennan, Geoffrey; Guo, Junfeng; Sonka, Milan; Hoffman, Eric

    2006-03-01

    In this study we utilize our texture characterization software (3-D AMFM) to characterize interstitial lung diseases (including emphysema) based on MDCT generated volumetric data using 3-dimensional texture features. We have sought to test whether the scanner and reconstruction filter (kernel) type affect the classification of lung diseases using the 3-D AMFM. We collected MDCT images in three subject groups: emphysema (n=9), interstitial pulmonary fibrosis (IPF) (n=10), and normal non-smokers (n=9). In each group, images were scanned either on a Siemens Sensation 16 or 64-slice scanner, (B50f or B30 recon. kernel) or a Philips 4-slice scanner (B recon. kernel). A total of 1516 volumes of interest (VOIs; 21x21 pixels in plane) were marked by two chest imaging experts using the Iowa Pulmonary Analysis Software Suite (PASS). We calculated 24 volumetric features. Bayesian methods were used for classification. Images from different scanners/kernels were combined in all possible combinations to test how robust the tissue classification was relative to the differences in image characteristics. We used 10-fold cross validation for testing the result. Sensitivity, specificity and accuracy were calculated. One-way Analysis of Variances (ANOVA) was used to compare the classification result between the various combinations of scanner and reconstruction kernel types. This study yielded a sensitivity of 94%, 91%, 97%, and 93% for emphysema, ground-glass, honeycombing, and normal non-smoker patterns respectively using a mixture of all three subject groups. The specificity for these characterizations was 97%, 99%, 99%, and 98%, respectively. The F test result of ANOVA shows there is no significant difference (p <0.05) between different combinations of data with respect to scanner and convolution kernel type. Since different MDCT and reconstruction kernel types did not show significant differences in regards to the classification result, this study suggests that the 3-D AMFM can be generally introduced.

  9. The efficacy of adding dexamethasone, midazolam, or epinephrine to 0.5% bupivacaine in supraclavicular brachial plexus block.

    PubMed

    El-Baradey, Ghada F; Elshmaa, Nagat S

    2014-11-01

    The aim was to assess the effectiveness of adding either dexamethasone or midazolam in comparison with epinephrine addition to 0.5% bupivacaine in supraclavicular brachial plexus block. This is a prospective randomized controlled observer-blinded study. This study was carried out in Tanta University Hospital on 60 patients of both sexes; American Society of Anesthesiologists physical Status I and II, age range from 18 to 45 years undergo elective surgery to upper limb. All patients were anesthetized with ultrasound guided supraclavicular brachial plexus block and randomly divided into three groups (each group 20 patients) Group E (epinephrine): 30 mL bupivacaine 0.5%with 1:200,000 epinephrine (5 μg/mL). Group D (dexamethasone): 30 mL bupivacaine 0.5% and dexamethasone 8 mg. Group M (midazolam): 30 ml bupivacaine 0.5% and midazolam 50 μg/kg. The primary outcome measures were onset and duration of sensory and motor block and time to first analgesic request. The windows version of SPSS 11.0.1 (SPSS Inc., Chicago, IL, USA) was used for statistical analysis. Data were presented in form of mean ± standard deviation multiple analysis of variance (ANOVA) was used to compare the three groups and Scheffe test was used after ANOVA. Power of significance P < 0.05 was considered to be statistically significant. Onset of sensory and motor block was significantly rapid (P < 0.05) in Groups D and M in comparison with Group E. Time of administration of rescue analgesic, duration of sensory and motor block showed significant increase (P < 0.05) in Group D in comparison with Group M which showed significant increase (P < 0.05) in comparison with Group E. In comparison with epinephrine and midazolam addition of dexamethasone to bupivacaine had rapid onset of block and longer time to first analgesic request with fewer side-effects.

  10. Investigation of marital satisfaction and its relationship with job stress and general health of nurses in Qazvin, Iran.

    PubMed

    Azimian, Jalil; Piran, Pegah; Jahanihashemi, Hassan; Dehghankar, Leila

    2017-04-01

    Pressures in nursing can affect family life and marital problems, disrupt common social problems, increase work-family conflicts and endanger people's general health. To determine marital satisfaction and its relationship with job stress and general health of nurses. This descriptive and cross-sectional study was done in 2015 in medical educational centers of Qazvin by using an ENRICH marital satisfaction scale and General Health and Job Stress questionnaires completed by 123 nurses. Analysis was done by SPSS version 19 using descriptive and analytical statistics (Pearson correlation, t-test, ANOVA, Chi-square, regression line, multiple regression analysis). The findings showed that 64.4% of nurses had marital satisfaction. There was significant relationship between age (p=0.03), job experience (p=0.01), age of spouse (p=0.01) and marital satisfaction. The results showed that there was a significant relationship between marital satisfaction and general health (p<0.0001). Multiple regression analysis showed that there was a significant relationship between depression (p=0.012) and anxiety (p=0.001) with marital satisfaction. Due to high levels of job stress and disorder in general health of nurses and low marital satisfaction by running health promotion programs and paying attention to its dimensions can help work and family health of nurses.

  11. The physicochemical quality and meat microstructure of post laying hen with addition of Biduri (Calotropis gigantea) latex extract

    NASA Astrophysics Data System (ADS)

    Nuhriawangsa, A. M. P.; Hertanto, B. S.; Kartikasari, L. R.; Swastike, W.; Cahyadi, M.; Rasid, S.

    2018-01-01

    The objective of this study was to evaluate the effect of extract level of Biduri latex on the meat quality of laying hens. The materials of this research were Biduri latex and thigh meat from hens strain Lohman. The latex was tapped from a young tissue stem and centrifuged for its supernatant. Meats were smeared with latex, punctured and incubated for 30 minutes. Concentrations of latex were 0, 3, 6 and 9% from the weight of meat (w/w). The variables were water, dissolved protein, crude fat content, tenderness and microstructure of meat. The statistical analysis method using ANOVA and if there was a mean difference, Duncan test was used. Descriptive analysis was used for microstructures of meat by comparing its hydrolysis conditions. The study showed that fat had significant difference (P <0.05), dissolved protein and tenderness had very significance (P <0.01). Descriptive analysis showed that there were different compositions of microstructures on meat structure. The fat content increased with addition of 3% latex. The value of dissolved protein increased but tenderness decreased by addition extract of 6% latex. The addition of Biduri latex extract showed that hydrolysis in the microstructure of meat. The addition of 6% latex was the best meat quality.

  12. Master Regulators of Oncogenic KRAS Response in Pancreatic Cancer: An Integrative Network Biology Analysis

    PubMed Central

    2017-01-01

    Background KRAS is the most frequently mutated gene in pancreatic ductal adenocarcinoma (PDAC), but the mechanisms underlying the transcriptional response to oncogenic KRAS are still not fully understood. We aimed to uncover transcription factors that regulate the transcriptional response of oncogenic KRAS in pancreatic cancer and to understand their clinical relevance. Methods and Findings We applied a well-established network biology approach (master regulator analysis) to combine a transcriptional signature for oncogenic KRAS derived from a murine isogenic cell line with a coexpression network derived by integrating 560 human pancreatic cancer cases across seven studies. The datasets included the ICGC cohort (n = 242), the TCGA cohort (n = 178), and five smaller studies (n = 17, 25, 26, 36, and 36). 55 transcription factors were coexpressed with a significant number of genes in the transcriptional signature (gene set enrichment analysis [GSEA] p < 0.01). Community detection in the coexpression network identified 27 of the 55 transcription factors contributing to three major biological processes: Notch pathway, down-regulated Hedgehog/Wnt pathway, and cell cycle. The activities of these processes define three distinct subtypes of PDAC, which demonstrate differences in survival and mutational load as well as stromal and immune cell composition. The Hedgehog subgroup showed worst survival (hazard ratio 1.73, 95% CI 1.1 to 2.72, coxPH test p = 0.018) and the Notch subgroup the best (hazard ratio 0.62, 95% CI 0.42 to 0.93, coxPH test p = 0.019). The cell cycle subtype showed highest mutational burden (ANOVA p < 0.01) and the smallest amount of stromal admixture (ANOVA p < 2.2e–16). This study is limited by the information provided in published datasets, not all of which provide mutational profiles, survival data, or the specifics of treatment history. Conclusions Our results characterize the regulatory mechanisms underlying the transcriptional response to oncogenic KRAS and provide a framework to develop strategies for specific subtypes of this disease using current therapeutics and by identifying targets for new groups. PMID:28141826

  13. White Matter Tract Integrity in Alzheimer's Disease vs. Late Onset Bipolar Disorder and Its Correlation with Systemic Inflammation and Oxidative Stress Biomarkers.

    PubMed

    Besga, Ariadna; Chyzhyk, Darya; Gonzalez-Ortega, Itxaso; Echeveste, Jon; Graña-Lecuona, Marina; Graña, Manuel; Gonzalez-Pinto, Ana

    2017-01-01

    Background: Late Onset Bipolar Disorder (LOBD) is the development of Bipolar Disorder (BD) at an age above 50 years old. It is often difficult to differentiate from other aging dementias, such as Alzheimer's Disease (AD), because they share cognitive and behavioral impairment symptoms. Objectives: We look for WM tract voxel clusters showing significant differences when comparing of AD vs. LOBD, and its correlations with systemic blood plasma biomarkers (inflammatory, neurotrophic factors, and oxidative stress). Materials: A sample of healthy controls (HC) ( n = 19), AD patients ( n = 35), and LOBD patients ( n = 24) was recruited at the Alava University Hospital. Blood plasma samples were obtained at recruitment time and analyzed to extract the inflammatory, oxidative stress, and neurotrophic factors. Several modalities of MRI were acquired for each subject, Methods: Fractional anisotropy (FA) coefficients are obtained from diffusion weighted imaging (DWI). Tract based spatial statistics (TBSS) finds FA skeleton clusters of WM tract voxels showing significant differences for all possible contrasts between HC, AD, and LOBD. An ANOVA F -test over all contrasts is carried out. Results of F -test are used to mask TBSS detected clusters for the AD > LOBD and LOBD > AD contrast to select the image clusters used for correlation analysis. Finally, Pearson's correlation coefficients between FA values at cluster sites and systemic blood plasma biomarker values are computed. Results: The TBSS contrasts with by ANOVA F -test has identified strongly significant clusters in the forceps minor, inferior longitudinal fasciculus, inferior fronto-occipital fasciculus, and cingulum gyrus. The correlation analysis of these tract clusters found strong negative correlation of AD with the nerve growth factor (NGF) and brain derived neurotrophic factor (BDNF) blood biomarkers. Negative correlation of AD and positive correlation of LOBD with inflammation biomarker IL6 was also found. Conclusion: TBSS voxel clusters tract atlas localizations are consistent with greater behavioral impairment and mood disorders in LOBD than in AD. Correlation analysis confirms that neurotrophic factors (i.e., NGF, BDNF) play a great role in AD while are absent in LOBD pathophysiology. Also, correlation results of IL1 and IL6 suggest stronger inflammatory effects in LOBD than in AD.

  14. The Statistical Power of Planned Comparisons.

    ERIC Educational Resources Information Center

    Benton, Roberta L.

    Basic principles underlying statistical power are examined; and issues pertaining to effect size, sample size, error variance, and significance level are highlighted via the use of specific hypothetical examples. Analysis of variance (ANOVA) and related methods remain popular, although other procedures sometimes have more statistical power against…

  15. Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network technique

    NASA Astrophysics Data System (ADS)

    Arif, Sajjad; Tanwir Alam, Md; Ansari, Akhter H.; Bilal Naim Shaikh, Mohd; Arif Siddiqui, M.

    2018-05-01

    The tribological performance of aluminium hybrid composites reinforced with micro SiC (5 wt%) and nano zirconia (0, 3, 6 and 9 wt%) fabricated through powder metallurgy technique were investigated using statistical and artificial neural network (ANN) approach. The influence of zirconia reinforcement, sliding distance and applied load were analyzed with test based on full factorial design of experiments. Analysis of variance (ANOVA) was used to evaluate the percentage contribution of each process parameters on wear loss. ANOVA approach suggested that wear loss be mainly influenced by sliding distance followed by zirconia reinforcement and applied load. Further, a feed forward back propagation neural network was applied on input/output date for predicting and analyzing the wear behaviour of fabricated composite. A very close correlation between experimental and ANN output were achieved by implementing the model. Finally, ANN model was effectively used to find the influence of various control factors on wear behaviour of hybrid composites.

  16. Sequential experimental design based generalised ANOVA

    NASA Astrophysics Data System (ADS)

    Chakraborty, Souvik; Chowdhury, Rajib

    2016-07-01

    Over the last decade, surrogate modelling technique has gained wide popularity in the field of uncertainty quantification, optimization, model exploration and sensitivity analysis. This approach relies on experimental design to generate training points and regression/interpolation for generating the surrogate. In this work, it is argued that conventional experimental design may render a surrogate model inefficient. In order to address this issue, this paper presents a novel distribution adaptive sequential experimental design (DA-SED). The proposed DA-SED has been coupled with a variant of generalised analysis of variance (G-ANOVA), developed by representing the component function using the generalised polynomial chaos expansion. Moreover, generalised analytical expressions for calculating the first two statistical moments of the response, which are utilized in predicting the probability of failure, have also been developed. The proposed approach has been utilized in predicting probability of failure of three structural mechanics problems. It is observed that the proposed approach yields accurate and computationally efficient estimate of the failure probability.

  17. Sequential experimental design based generalised ANOVA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chakraborty, Souvik, E-mail: csouvik41@gmail.com; Chowdhury, Rajib, E-mail: rajibfce@iitr.ac.in

    Over the last decade, surrogate modelling technique has gained wide popularity in the field of uncertainty quantification, optimization, model exploration and sensitivity analysis. This approach relies on experimental design to generate training points and regression/interpolation for generating the surrogate. In this work, it is argued that conventional experimental design may render a surrogate model inefficient. In order to address this issue, this paper presents a novel distribution adaptive sequential experimental design (DA-SED). The proposed DA-SED has been coupled with a variant of generalised analysis of variance (G-ANOVA), developed by representing the component function using the generalised polynomial chaos expansion. Moreover,more » generalised analytical expressions for calculating the first two statistical moments of the response, which are utilized in predicting the probability of failure, have also been developed. The proposed approach has been utilized in predicting probability of failure of three structural mechanics problems. It is observed that the proposed approach yields accurate and computationally efficient estimate of the failure probability.« less

  18. Split-plot microarray experiments: issues of design, power and sample size.

    PubMed

    Tsai, Pi-Wen; Lee, Mei-Ling Ting

    2005-01-01

    This article focuses on microarray experiments with two or more factors in which treatment combinations of the factors corresponding to the samples paired together onto arrays are not completely random. A main effect of one (or more) factor(s) is confounded with arrays (the experimental blocks). This is called a split-plot microarray experiment. We utilise an analysis of variance (ANOVA) model to assess differentially expressed genes for between-array and within-array comparisons that are generic under a split-plot microarray experiment. Instead of standard t- or F-test statistics that rely on mean square errors of the ANOVA model, we use a robust method, referred to as 'a pooled percentile estimator', to identify genes that are differentially expressed across different treatment conditions. We illustrate the design and analysis of split-plot microarray experiments based on a case application described by Jin et al. A brief discussion of power and sample size for split-plot microarray experiments is also presented.

  19. Efficacy and tolerability of lodenafil carbonate for oral therapy of erectile dysfunction: a phase III clinical trial.

    PubMed

    Glina, Sidney; Fonseca, Gilvan N; Bertero, Eduardo B; Damião, Ronaldo; Rocha, Luíz C A; Jardim, Carlos R F; Cairoli, Carlos E; Teloken, Cláudio; Torres, Luiz O; Faria, Geraldo E; da Silva, Marcelo B; Pagani, Eduardo

    2010-05-01

    This is a phase III, prospective, randomized, double-blind, placebo-controlled clinical trial on lodenafil carbonate (LC), a novel phosphodiesterase 5 inhibitor developed in Brazil. Expanding information on LC efficacy and safety. International Index of Erectile Function (IIEF) erectile domain, positive answers to the sexual encounter profile (SEP)-2 and SEP-3 questions and incidence of adverse events (AEs). A total of 350 men with erectile dysfunction (ED) of all degrees were randomized to placebo, LC 40 mg or LC 80 mg and followed for 4 weeks. They completed the IIEF and answered the SEP questions 2 and 3 after each intercourse without and with the use of LC. IIEF Erectile Domain scores without and with the use of medication were the following (mean [M] +/- standard deviation [SD]): placebo = 13.9 +/- 5.2 and 14.8 +/- 7.8; LC 40 mg = 13.6 +/- 5.3 and 18.6 +/- 8.0; LC 80 mg = 13.4 +/- 4.9 and 20.6 +/- 7.7 (analysis of variance [ANOVA] P < 0.01). Positive answers to SEP-2 without and with the use of medication were the following (M +/- SD): placebo = 55.3 +/- 43.2% and 52.1 +/- 41.4%; LC 40 mg = 46.4 +/- 44.3% and 63.5 +/- 42.0%; LC 80 mg = 50.2 +/- 40.9% and 80.8 +/- 32.3% (ANOVA P < 0.01). Positive answers to SEP-3 were the following: placebo = 20.2 +/- 32.3% and 29.7 +/- 38.1%; LC 40 mg = 19.6 +/- 34.3% and 50.8 +/- 44.4%; LC 80 mg = 20.8 +/- 33.2% and 66.0 +/- 39.3% (ANOVA P < 0.01). The patients with at least one AE were placebo = 28.7%, LC 40 mg = 40.9%, and LC 80 mg = 49.5%. AEs whose incidence was significantly higher with LC than with placebo included rhinitis, headache, flushing, visual disorder, and dizziness. LC showed a satisfactory efficacy-safety profile for oral therapy of ED.

  20. Extending the reach of an evidence-based theatrical intervention.

    PubMed

    Noice, Helga; Noice, Tony

    2013-01-01

    BACKGROUND/STUDY CONTEXT: In Experiment 1, the authors investigated whether they could train retirement home activity directors with no previous experience in theatre to successfully execute an evidence-based 4-week theatre-arts intervention. In Experiment 2, they investigated whether an outside professional acting teacher who received only minimal training via e-mail and telephone could successfully execute the same intervention heretofore only carried out by the actor/director/professor who devised it. A total of 115 participants (ages 68-94) in four different retirement homes were taught theatre arts either by their in-house activity director who had no formal training in theatre or a professional acting teacher recruited through a local community college. The intervention consisted of twice-weekly 70-min lessons for 4 weeks. After random assignment to experimental or waiting-list control groups, participants were given pre- and posttests on both functional and cognitive measures. Experiment 1 showed that activity directors were able to run this intervention and achieve significant results on the 28-item functional measure (Observed Tasks of Daily Living, Revised [OTDL-R]) as measured by a mixed-design analysis of variance (ANOVA) and paired-sample t tests (p < .001), and on one cognitive measure, Means-End Problem-Solving (MEPS), as measured by a multivariate ANOVA (MANCOVA) and follow-up univariate ANOVAs. Experiment 2 (outside acting teacher) used the identical measures and revealed significant results on the OTDL-R (p = .002), word recall, MEPS, and verbal fluency (η²(p) ranging from .28 to .59). This study addressed the feasibility of training multiple instructors of varying experience to administer this theatre-arts intervention. Previous iterations had all been administered by the professional actor/director/theatre professor who devised the program. These current results demonstrate that widespread administration of this short-term (4-week) evidence-based intervention is feasible.

  1. Comparison of central corneal thickness measurements using ultrasound pachymetry, ultrasound biomicroscopy, and the Artemis-2 VHF scanner in normal eyes

    PubMed Central

    Al-Farhan, Haya M; Al-Otaibi, Wafa’a Majed

    2012-01-01

    Purpose To compare the precision of central corneal thickness (CCT) measurements taken with the handheld ultrasound pachymeter (USP), ultrasound biomicroscopy (UBM), and the Artemis-2 very high frequency ultrasound scanner (VHFUS) on normal subjects. Design Prospective study. Methods One eye from each of 61 normal subjects was randomly selected for this study. The measurements of the CCT were taken with the USP, VHFUS, and UBM. Results were compared statistically using repeated-measures analysis of variance (ANOVA), Pearson’s correlation coefficient, and limits of agreement. Results The average CCT (± standard deviation) was 530.1 ± 30.5 μm, 554.9 ± 31.7 μm, and 559.5 ± 30.7 μm for UBM, VHFUS, and USP respectively. The intraobserver repeatability analyses of variance are not significant for USP, UBM, and VHFUS. P-values were 0.17, 0.19, and 0.37 respectively. Repeated-measures ANOVA showed a significant difference between the three different methods of measuring CCT (P = 0.0001). The ANOVA test revealed no statistically significant difference between USP and VHFUS (P > 0.05), yet statistical significant differences with UBM versus USP and UBM versus VHFUS (P < 0.001). There were high correlations between the three instruments (P < 0.0001). The mean differences (and upper/lower limits of agreement) for CCT measurements were 29.4 ± 14.3 (2.7/56), 4.6 ± 8.6 (−14.7/23.8), and −24.8 ± 13.1 (−50.4/0.8) for USP versus UBM, USP versus VHFUS, and UBM versus VHFUS, respectively. Conclusion The UBM produces CCT measurements that vary significantly from those returned by the USP and the VHFUS, suggesting that the UBM may not be used interchangeably with either equipment for monitoring the CCT in the clinical setting. PMID:22848145

  2. Vestibular-dependent inter-stimulus interval effects on sound evoked potentials of central origin.

    PubMed

    Todd, N P M; Govender, S; Colebatch, J G

    2016-11-01

    Todd et al. (2014ab) have recently demonstrated the presence of vestibular-dependent contributions to auditory evoked potentials (AEPs) when passing through the vestibular threshold as determined by vestibular evoked myogenic potentials (VEMPs), including a particular deflection labeled as an N42/P52 prior to the long-latency AEPs N1 and P2. In this paper we report the results of an experiment to determine the effect of inter-stimulus interval (ISI) and regularity on potentials recorded above and below VEMP threshold. Five healthy, right-handed subjects were recruited and evoked potentials were recorded to binaurally presented sound stimulation, above and below vestibular threshold, at seven stimulus rates with ISIs of 212, 300, 424, 600, 848, 1200 and 1696 ms. The inner five intervals, i.e. 300, 424, 600, 848, 1200 ms, were presented twice in both regular and irregular conditions. ANOVA on the global field power (GFP) were conducted for each of four waves, N42, P52, N1 and P2 with factors of intensity, ISI and regularity. Both N42 and P52 waves showed significant ANOVA effects of intensity but no other main effects or interactions. In contrast both N1 and P2 showed additional effects of ISI, as well as intensity, and evidence of non-linear interactions between ISI and intensity. A source analysis was carried out consistent with prior work suggesting that when above vestibular threshold, in addition to bilateral superior temporal cortex, ocular, cerebellar and cingulate sources are recruited. Further statistical analysis of the source currents indicated that the origin of the interactions with intensity may be the ISI sensitivity of the vestibular-dependent sources. This in turn may reflect a specific vestibular preference for stimulus rates associated with locomotion, i.e. rates close to 2 Hz, or ISIs close to 500 ms, where saccular afferents show increased gain and the corresponding reflexes are most sensitive. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  3. Reliability, repeatability, and reproducibility of pulmonary transit time assessment by contrast enhanced echocardiography.

    PubMed

    Herold, Ingeborg H F; Saporito, Salvatore; Bouwman, R Arthur; Houthuizen, Patrick; van Assen, Hans C; Mischi, Massimo; Korsten, Hendrikus H M

    2016-01-05

    The aim of this study is to investigate the inter and intra-rater reliability, repeatability, and reproducibility of pulmonary transit time (PTT) measurement in patients using contrast enhanced ultrasound (CEUS), as an indirect measure of preload and left ventricular function. Mean transit times (MTT) were measured by drawing a region of interest (ROI) in right and left cardiac ventricle in the CEUS loops. Acoustic intensity dilution curves were obtained from the ROIs. MTTs were calculated by applying model-based fitting on the dilution curves. PTT was calculated as the difference of the MTTs. Eight raters with different levels of experience measured the PTT (time moment 1) and repeated the measurement within a week (time moment 2). Reliability and agreement were assessed using intra-class correlations (ICC) and Bland-Altman analysis. Repeatability was tested by estimating the variance of means (ANOVA) of three injections in each patient at different doses. Reproducibility was tested by the ICC of the two time moments. Fifteen patients with heart failure were included. The mean PTT was 11.8 ± 3.1 s at time moment 1 and 11.7 ± 2.9 s at time moment 2. The inter-rater reliability for PTT was excellent (ICC = 0.94). The intra-rater reliability per rater was between 0.81-0.99. Bland-Altman analysis revealed a bias of 0.10 s within the rater groups. Reproducibility for PTT showed an ICC = 0.94 between the two time moments. ANOVA showed no significant difference between the means of the three different doses F = 0.048 (P = 0.95). The mean and standard deviation for PTT estimates at three different doses was 11.6 ± 3.3 s. PTT estimation using CEUS shows a high inter- and intra-rater reliability, repeatability at three different doses, and reproducibility by ROI drawing. This makes the minimally invasive PTT measurement using contrast echocardiography ready for clinical evaluation in patients with heart failure and for preload estimation.

  4. Effects of forest fragmentation on the beetle assemblage at the relict forest of Fray Jorge, Chile.

    PubMed

    Barbosa, Olga; Marquet, Pablo A

    2002-07-01

    Habitat fragmentation is recognized as one of the main factors associated with species extinction and is particularly acute in South American forest habitats. In this study, we examined the effects of forest fragmentation on the beetle assemblage at the relict temperate forest of Fray Jorge (Chile). We evaluated the following hypotheses: (1) there is a strong edge effect, so that the number of beetle species and individuals increases away from the edge, towards the inner part of each fragment, (2) this pattern should be apparent in the larger fragments but not in the smaller ones, where edge effects are expected to be stronger, and (3) there should be a significant interaction between number of species/individuals found inside and outside fragments (i.e., in the matrix) and season, because of an increase in aridity and water stress during austral summer months. We found that the relationship between the number of individuals and number of species vs distance from the matrix towards the forest interior was affected by fragment size and season. In general, both number of species and individuals tended to increase from the matrix towards the forest edge and then either decrease, increase or maintain a constant level, depending on fragment size and season. The result of an ANOVA analysis, which used season, size, and position (inside vs outside fragments) as factors and number of individuals as the response variable, showed a significant effect of fragment size, position, and season and a significant interaction between fragment size and season, season and position, and size and position. ANOVA analysis using number of species as the response variable showed that area, season, and position all had significant effects. The results also showed a significant interaction between size and season and between season and position. Our results emphasize the existence of strong fragment-size and seasonal effects modulating both the response of beetles to fragmentation and their abundance and distribution in temperate areas. Thus, seasonal dynamic effects can be of paramount importance to demonstrate and understand the effect of habitat fragmentation upon arthropod assemblages in temperate areas.

  5. Optimization conditions of samples saponification for tocopherol analysis.

    PubMed

    Souza, Aloisio Henrique Pereira; Gohara, Aline Kirie; Rodrigues, Ângela Claudia; Ströher, Gisely Luzia; Silva, Danielle Cristina; Visentainer, Jesuí Vergílio; Souza, Nilson Evelázio; Matsushita, Makoto

    2014-09-01

    A full factorial design 2(2) (two factors at two levels) with duplicates was performed to investigate the influence of the factors agitation time (2 and 4 h) and the percentage of KOH (60% and 80% w/v) in the saponification of samples for the determination of α, β and γ+δ-tocopherols. The study used samples of peanuts (cultivar armadillo), produced and marketed in Maringá, PR. The factors % KOH and agitation time were significant, and an increase in their values contributed negatively to the responses. The interaction effect was not significant for the response δ-tocopherol, and the contribution of this effect to the other responses was positive, but less than 10%. The ANOVA and response surfaces analysis showed that the most efficient saponification procedure was obtained using a 60% (w/v) solution of KOH and with an agitation time of 2 h. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. A Comparison of Analytical and Data Preprocessing Methods for Spectral Fingerprinting

    PubMed Central

    LUTHRIA, DEVANAND L.; MUKHOPADHYAY, SUDARSAN; LIN, LONG-ZE; HARNLY, JAMES M.

    2013-01-01

    Spectral fingerprinting, as a method of discriminating between plant cultivars and growing treatments for a common set of broccoli samples, was compared for six analytical instruments. Spectra were acquired for finely powdered solid samples using Fourier transform infrared (FT-IR) and Fourier transform near-infrared (NIR) spectrometry. Spectra were also acquired for unfractionated aqueous methanol extracts of the powders using molecular absorption in the ultraviolet (UV) and visible (VIS) regions and mass spectrometry with negative (MS−) and positive (MS+) ionization. The spectra were analyzed using nested one-way analysis of variance (ANOVA) and principal component analysis (PCA) to statistically evaluate the quality of discrimination. All six methods showed statistically significant differences between the cultivars and treatments. The significance of the statistical tests was improved by the judicious selection of spectral regions (IR and NIR), masses (MS+ and MS−), and derivatives (IR, NIR, UV, and VIS). PMID:21352644

  7. Corneal Structural Changes in Nonneoplastic and Neoplastic Monoclonal Gammopathies.

    PubMed

    Aragona, Pasquale; Allegra, Alessandro; Postorino, Elisa Imelde; Rania, Laura; Innao, Vanessa; Wylegala, Edward; Nowinska, Anna; Ieni, Antonio; Pisani, Antonina; Musolino, Caterina; Puzzolo, Domenico; Micali, Antonio

    2016-05-01

    To investigate corneal confocal microscopic changes in nonneoplastic and neoplastic monoclonal gammopathies. Three groups of subjects were considered: group 1, twenty normal subjects; group 2, fifteen patients with monoclonal gammopathy of undetermined significance (MGUS); group 3, eight patients with smoldering multiple myeloma and eight patients with untreated multiple myeloma. After hematologic diagnosis, patients underwent ophthalmologic exam and in vivo confocal microscopic study. The statistical analysis was performed using ANOVA and Student-Newman-Keuls tests and receiver operating characteristic (ROC) curve analysis. Epithelial cells of gammopathic patients showed significantly higher reflectivity than controls, demonstrated by optical density (P < 0.001). Subbasal nerve density, branching, and beading were significantly altered in gammopathic patients (P = 0.01, P = 0.02, P = 0.02, respectively). The number of keratocytes was significantly reduced in neoplastic patients (P < 0.001 versus both normal and MGUS) in the anterior, medium, and posterior stroma. The ROC curve analysis showed good sensitivity and specificity for this parameter. Group 2 and 3 keratocytes showed higher nuclear and cytoplasmatic reflectivity in the medium and posterior stroma. Endothelial cells were not affected. Patients with neoplastic gammopathies showed peculiar alterations of the keratocyte number, which appeared significantly reduced. A follow-up with corneal confocal microscopy of patients with MGUS is suggested as a useful tool to identify peripheral tissue alterations linked to possible neoplastic disease development.

  8. Experimental Investigation and Optimization of Response Variables in WEDM of Inconel - 718

    NASA Astrophysics Data System (ADS)

    Karidkar, S. S.; Dabade, U. A.

    2016-02-01

    Effective utilisation of Wire Electrical Discharge Machining (WEDM) technology is challenge for modern manufacturing industries. Day by day new materials with high strengths and capabilities are being developed to fulfil the customers need. Inconel - 718 is similar kind of material which is extensively used in aerospace applications, such as gas turbine, rocket motors, and spacecraft as well as in nuclear reactors and pumps etc. This paper deals with the experimental investigation of optimal machining parameters in WEDM for Surface Roughness, Kerf Width and Dimensional Deviation using DoE such as Taguchi methodology, L9 orthogonal array. By keeping peak current constant at 70 A, the effect of other process parameters on above response variables were analysed. Obtained experimental results were statistically analysed using Minitab-16 software. Analysis of Variance (ANOVA) shows pulse on time as the most influential parameter followed by wire tension whereas spark gap set voltage is observed to be non-influencing parameter. Multi-objective optimization technique, Grey Relational Analysis (GRA), shows optimal machining parameters such as pulse on time 108 Machine unit, spark gap set voltage 50 V and wire tension 12 gm for optimal response variables considered for the experimental analysis.

  9. Quantile regression for the statistical analysis of immunological data with many non-detects.

    PubMed

    Eilers, Paul H C; Röder, Esther; Savelkoul, Huub F J; van Wijk, Roy Gerth

    2012-07-07

    Immunological parameters are hard to measure. A well-known problem is the occurrence of values below the detection limit, the non-detects. Non-detects are a nuisance, because classical statistical analyses, like ANOVA and regression, cannot be applied. The more advanced statistical techniques currently available for the analysis of datasets with non-detects can only be used if a small percentage of the data are non-detects. Quantile regression, a generalization of percentiles to regression models, models the median or higher percentiles and tolerates very high numbers of non-detects. We present a non-technical introduction and illustrate it with an implementation to real data from a clinical trial. We show that by using quantile regression, groups can be compared and that meaningful linear trends can be computed, even if more than half of the data consists of non-detects. Quantile regression is a valuable addition to the statistical methods that can be used for the analysis of immunological datasets with non-detects.

  10. An application of Six Sigma methodology to turnover intentions in health care.

    PubMed

    Taner, Mehmet

    2009-01-01

    The purpose of this study is to show how the principles of Six Sigma can be applied to the high turnover problem of doctors in medical emergency services and paramedic backup. Six Sigma's define-measure-analyse-improve-control (DMAIC) is applied for reducing the turnover rate of doctors in an organisation operating in emergency services. Variables of the model are determined. Explanatory factor analysis, multiple regression, analysis of variance (ANOVA) and Gage R&R are employed for the analysis. Personal burnout/stress and dissatisfaction from salary were found to be the "vital few" variables. The organisation took a new approach by improving its initiatives to doctors' working conditions. Sigma level of the process is increased. New policy and process changes have been found to effectively decrease the incidence of turnover intentions. The improved process is gained, standardised and institutionalised. This study is one of the few papers in the literature that elaborates the turnover problem of doctors working in the emergency and paramedic backup services.

  11. TSP Symposium 2012 Proceedings

    DTIC Science & Technology

    2012-11-01

    and Statistical Model 78 7.3 Analysis and Results 79 7.4 Threats to Validity and Limitations 85 7.5 Conclusions 86 7.6 Acknowledgments 87 7.7...Table 12: Overall Statistics of the Experiment 32 Table 13: Results of Pairwise ANOVA Analysis, Highlighting Statistically Significant Differences...we calculated the percentage of defects injected. The distribution statistics are shown in Table 2. Table 2: Mean Lower, Upper Confidence Interval

  12. Acute effect of a complex training protocol of back squats on 30-m sprint times of elite male military athletes

    PubMed Central

    Ojeda, Álvaro Huerta; Ríos, Luis Chirosa; Barrilao, Rafael Guisado; Serrano, Pablo Cáceres

    2016-01-01

    [Purpose] The aim of this study was to determine the acute effect temporal of a complex training protocol on 30 meter sprint times. A secondary objective was to evaluate the fatigue indexes of military athletes. [Subjects and Methods] Seven military athletes were the subjects of this study. The variables measured were times in 30-meter sprint, and average power and peak power of squats. The intervention session with complex training consisted of 4 sets of 5 repetitions at 30% 1RM + 4 repetitions at 60% 1RM + 3 repetitions of 30 meters with 120-second rests. For the statistical analysis repeated measures of ANOVA was used, and for the post hoc analysis, student’s t-test was used. [Results] Times in 30 meter sprints showed a significant reduction between the control set and the four experimental sets, but the average power and peak power of squats did not show significant changes. [Conclusion] The results of the study show the acute positive effect of complex training, over time, in 30-meter sprint by military athletes. This effect is due to the post activation potentiation of the lower limbs’ muscles in the 30 meters sprint. PMID:27134353

  13. Acute effect of a complex training protocol of back squats on 30-m sprint times of elite male military athletes.

    PubMed

    Ojeda, Álvaro Huerta; Ríos, Luis Chirosa; Barrilao, Rafael Guisado; Serrano, Pablo Cáceres

    2016-03-01

    [Purpose] The aim of this study was to determine the acute effect temporal of a complex training protocol on 30 meter sprint times. A secondary objective was to evaluate the fatigue indexes of military athletes. [Subjects and Methods] Seven military athletes were the subjects of this study. The variables measured were times in 30-meter sprint, and average power and peak power of squats. The intervention session with complex training consisted of 4 sets of 5 repetitions at 30% 1RM + 4 repetitions at 60% 1RM + 3 repetitions of 30 meters with 120-second rests. For the statistical analysis repeated measures of ANOVA was used, and for the post hoc analysis, student's t-test was used. [Results] Times in 30 meter sprints showed a significant reduction between the control set and the four experimental sets, but the average power and peak power of squats did not show significant changes. [Conclusion] The results of the study show the acute positive effect of complex training, over time, in 30-meter sprint by military athletes. This effect is due to the post activation potentiation of the lower limbs' muscles in the 30 meters sprint.

  14. Effect of bentonite modification on hardness and mechanical properties of natural rubber nanocomposites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Santiago, Denise Ester O.; Department of Chemical Engineering, University of the Philippines, Los Baños, College, Laguna 4031 Philippines; Pajarito, Bryan B.

    The effect of sodium activation, ion-exchange with tertiary amine salt, surface treatment with non-ionic surfactant, and wet grinding of bentonite on hardness and mechanical properties of natural rubber nanocomposites (NRN) was studied using full factorial design of experiment. Results of X-ray diffraction (XRD) show increase in basal spacing d of bentonite due to modification, while attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) confirm the organic modification of bentonite. Analysis of variance (ANOVA) shows that the main effect of surface treatment increases the hardness and decreases the tensile modulus of the NRN. The surface treatment and wet grinding of bentonitemore » decrease the tensile stresses at 100, 200 and 300% strain of NRN. Sodium activation and ion-exchange negatively affect the compressive properties, while surface treatment significantly improves the compressive properties of NRN.« less

  15. Cognitive and academic achievement changes associated with day hospital rehabilitation in children with acquired brain injury.

    PubMed

    Goldstein, Gerald; Mayfield, Joan; Thaler, Nicholas S; Walker, Jon; Allen, Daniel N

    2018-01-01

    An evaluation was made of the outcome of a day hospital rehabilitation program for children who experienced an acquired neurological illness, mainly traumatic brain injury. Participants were administered neuropsychological and academic evaluations upon entry to the program, immediately upon discharge and several months after discharge Repeated measures ANOVA results for variables selected from the Reynolds Intellectual Assessment and the Delis-Kaplan Executive Function System found that comparisons showed significant (≥p < .01) improvement occurred between the first and second assessment, generally with large effect sizes. There were some nonsignificant decrements in performance between the discharge and follow-up assessments. A correlational analysis showed that while the association between cognitive function and academic achievement was robust, correlation coefficients did not differ in strength before and following rehabilitation. The study demonstrates significant improvement in children with acquired neurological disorders following rehabilitation.

  16. Exfoliative cytology of oral epithelial cells from patients with type 2 diabetes: cytomorphometric analysis

    PubMed Central

    Rivera, César; Núñez-de-Mendoza, Camila

    2013-01-01

    This research objective is to identify cytomorphometrical changes using exfoliative cytology (EC) and later Papanicolaou (Pap) staining, for oral epithelial cells of patients with type 2 diabetes (DM2) (n = 30), while being compared to patients without the disease (n = 30). Additionally, we investigated an association between cellular changes and salivary flow levels; relationship that until now has not been reported. Results show that the cell diameter and the nuclear-cytoplasmic ratio was significantly higher compared to those patients without the disease (p ≤ 0.001 Student and Welch test). Decreased salivary flow was significantly associated with increased cell diameter and nuclear-cytoplasmic ratio (p ≤ 0.001 ANOVA with Tukey test). Evidence and clinical observations show that DM2 and decreased salivary flow are related to detectable cytomorphometrical changes in exfoliated cells, which may extend the horizon of this cytological technique. PMID:24040475

  17. Exfoliative cytology of oral epithelial cells from patients with type 2 diabetes: cytomorphometric analysis.

    PubMed

    Rivera, César; Núñez-de-Mendoza, Camila

    2013-01-01

    This research objective is to identify cytomorphometrical changes using exfoliative cytology (EC) and later Papanicolaou (Pap) staining, for oral epithelial cells of patients with type 2 diabetes (DM2) (n = 30), while being compared to patients without the disease (n = 30). Additionally, we investigated an association between cellular changes and salivary flow levels; relationship that until now has not been reported. Results show that the cell diameter and the nuclear-cytoplasmic ratio was significantly higher compared to those patients without the disease (p ≤ 0.001 Student and Welch test). Decreased salivary flow was significantly associated with increased cell diameter and nuclear-cytoplasmic ratio (p ≤ 0.001 ANOVA with Tukey test). Evidence and clinical observations show that DM2 and decreased salivary flow are related to detectable cytomorphometrical changes in exfoliated cells, which may extend the horizon of this cytological technique.

  18. Scaffolding in geometry based on self regulated learning

    NASA Astrophysics Data System (ADS)

    Bayuningsih, A. S.; Usodo, B.; Subanti, S.

    2017-12-01

    This research aim to know the influence of problem based learning model by scaffolding technique on junior high school student’s learning achievement. This research took location on the junior high school in Banyumas. The research data obtained through mathematic learning achievement test and self-regulated learning (SRL) questioner. Then, the data analysis used two ways ANOVA. The results showed that scaffolding has positive effect to the mathematic learning achievement. The mathematic learning achievement use PBL-Scaffolding model is better than use PBL. The high SRL category student has better mathematic learning achievement than middle and low SRL categories, and then the middle SRL category has better than low SRL category. So, there are interactions between learning model with self-regulated learning in increasing mathematic learning achievement.

  19. The Outlier Detection for Ordinal Data Using Scalling Technique of Regression Coefficients

    NASA Astrophysics Data System (ADS)

    Adnan, Arisman; Sugiarto, Sigit

    2017-06-01

    The aims of this study is to detect the outliers by using coefficients of Ordinal Logistic Regression (OLR) for the case of k category responses where the score from 1 (the best) to 8 (the worst). We detect them by using the sum of moduli of the ordinal regression coefficients calculated by jackknife technique. This technique is improved by scalling the regression coefficients to their means. R language has been used on a set of ordinal data from reference distribution. Furthermore, we compare this approach by using studentised residual plots of jackknife technique for ANOVA (Analysis of Variance) and OLR. This study shows that the jackknifing technique along with the proper scaling may lead us to reveal outliers in ordinal regression reasonably well.

  20. Influence of the bracket on bonding and physical behavior of orthodontic resin cements.

    PubMed

    Bolaños-Carmona, Victoria; Zein, Bilal; Menéndez-Núñez, Mario; Sánchez-Sánchez, Purificación; Ceballos-García, Laura; González-López, Santiago

    2015-01-01

    The aim of the study is to determine the influence of the type of bracket, on bond strength, microhardness and conversion degree (CD) of four resin orthodontic cements. Micro-tensile bond strength (µTBS) test between the bracket base and the cement was carried out on glass-hour-shaped specimens (n=20). Vickers Hardness Number (VHN) and micro-Raman spectra were recorded in situ under the bracket base. Weibull distribution, ANOVA and non-parametric test were applied for data analysis (p<0.05). The highest values of ή as well as the β Weibull parameter were obtained for metallic brackets with Transbond™ plastic brackets with the self-curing cement showing the worst performance. The CD was from 80% to 62.5%.

  1. Concurrent validation of CHIRP, a new instrument for measuring healthcare student attitudes towards interdisciplinary teamwork.

    PubMed

    Hollar, David; Hobgood, Cherri; Foster, Beverly; Aleman, Marco; Sawning, Susan

    2012-01-01

    Positive attitudes towards teamwork among health care professionals are critical to patient safety. The purpose of this study is to describe the development and concurrent validation of a new instrument to measure attitudes towards healthcare teamwork that is generalizable across various populations of healthcare students. The Collaborative Healthcare Interdisciplinary Planning (CHIRP) scale was validated against the Readiness for Inter-Professional Learning Scale (RIPLS). Analyses included student (n = 266) demographics, ANOVA, internal consistency, factor analysis, and Rasch analysis. The two instruments correlated at r = .582. The CHIRP showed a multifactorial structure having excellent internal consistency (alpha = .850), with 25 of the 36 scale items loading onto a single Teamwork Attitudes factor. The RIPLS likewise had strong internal consistency (alpha = .796) and a three-factor structure, supporting previous studies of the instrument. However, Rasch analyses showed 14 (38.9%) of the 36 CHIRP items, but only four (21.1%) of the 19 RIPLS items remaining within the satisfactory standardized OUTFIT zone of 2.0 standard deviation units. We propose the 14 fitting items as a new, validated teamwork attitudes scale.

  2. Assessment of honking impact on traffic noise in urban traffic environment of Nagpur, India.

    PubMed

    Vijay, Ritesh; Sharma, Asheesh; Chakrabarti, Tapan; Gupta, Rajesh

    2015-01-01

    In context of increasing traffic noise in urban India, the objective of the research study is to assess noise due to heterogeneous traffic conditions and the impact of honking on it. Traffic volume, noise levels, honking, road geometry and vehicular speed were measured on national highway, major and minor roads in Nagpur, India. Initial study showed lack of correlation between traffic volume and equivalent noise due to some factors, later identified as honking, road geometry and vehicular speed. Further, frequency analysis of traffic noise showed that honking contributed an additional 2 to 5 dB (A) noise, which is quite significant. Vehicular speed was also found to increase traffic noise. Statistical method of analysis of variance (ANOVA) confirms that frequent honking (p < 0.01) and vehicular speed (p < 0.05) have substantial impact on traffic noise apart from traffic volume and type of road. The study suggests that honking must also be a component in traffic noise assessment and to identify and monitor "No Honking" zones in urban agglomerations.

  3. Modeling neuroendocrine stress reactivity in salivary cortisol: adjusting for peak latency variability.

    PubMed

    Lopez-Duran, Nestor L; Mayer, Stefanie E; Abelson, James L

    2014-07-01

    In this report, we present growth curve modeling (GCM) with landmark registration as an alternative statistical approach for the analysis of time series cortisol data. This approach addresses an often-ignored but critical source of variability in salivary cortisol analyses: individual and group differences in the time latency of post-stress peak concentrations. It allows for the simultaneous examination of cortisol changes before and after the peak while controlling for timing differences, and thus provides additional information that can help elucidate group differences in the underlying biological processes (e.g., intensity of response, regulatory capacity). We tested whether GCM with landmark registration is more sensitive than traditional statistical approaches (e.g., repeated measures ANOVA--rANOVA) in identifying sex differences in salivary cortisol responses to a psychosocial stressor (Trier Social Stress Test--TSST) in healthy adults (mean age 23). We used plasma ACTH measures as our "standard" and show that the new approach confirms in salivary cortisol the ACTH finding that males had longer peak latencies, higher post-stress peaks but a more intense post-peak decline. This finding would have been missed if only saliva cortisol was available and only more traditional analytic methods were used. This new approach may provide neuroendocrine researchers with a highly sensitive complementary tool to examine the dynamics of the cortisol response in a way that reduces risk of false negative findings when blood samples are not feasible.

  4. Diffusion Tensor Imaging of Heterotopia: Changes of Fractional Anisotropy during Radial Migration of Neurons

    PubMed Central

    Kim, Jinna

    2010-01-01

    Purpose Diffusion tensor imaging provides better understanding of pathophysiology of congenital anomalies, involving central nervous system. This study was aimed to specify the pathogenetic mechanism of heterotopia, proved by diffusion tensor imaging, and establish new findings of heterotopia on fractional anisotropy maps. Materials and Methods Diffusion-weighted imaging data from 11 patients (M : F = 7 : 4, aged from 1 to 22 years, mean = 12.3 years) who visited the epilepsy clinic and received a routine seizure protocol MRI exam were retrospectively analyzed. Fractional anisotropy (FA) maps were generated from diffusion tensor imaging of 11 patients with heterotopia. Regions of interests (ROI) were placed in cerebral cortex, heterotopic gray matter and deep gray matter, including putamen. ANOVA analysis was performed for comparison of different gray matter tissues. Results Heterotopic gray matter showed signal intensities similar to normal gray matter on T1 and T2 weighted MRI. The measured FA of heterotopic gray matter was higher than that of cortical gray matter (0.236 ± 0.011 vs. 0.169 ± 0.015, p < 0.01, one way ANOVA), and slightly lower than that of deep gray matter (0.236 ± 0.011 vs. 0.259 ± 0.016, p < 0.01). Conclusion Increased FA of heterotopic gray matter suggests arrested neuron during radial migration and provides better understanding of neurodevelopment. PMID:20499428

  5. Effect of electrical spot welding on load deflection rate of orthodontic wires.

    PubMed

    Alavi, Shiva; Abrishami, Arezoo

    2015-01-01

    One of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. This study evaluated the effect of electric spot welding on the load deflection rate of stainless steel and chromium-cobalt orthodontic wires. In this experimental-laboratory study, load deflection rate of 0.016 × 0.022 inch stainless steel and chromium cobalt wires were evaluated in five groups (n =18): group one: Stainless steel wires, group two: chromium-cobalt wires, group three: stainless steel wires welded to stainless steel wires, group four: Stainless steel wires welded to chromium-cobalt wires, group five: chromium-cobalt wire welded to chromium-cobalt wires. Afterward, the forces induced by the samples in 0.5 mm, 1 mm, 1.5 mm deflection were measured using a universal testing machine. Then mean force measured for each group was compared with other groups. The data were analyzed using repeated measure analysis of variance (ANOVA), one-way ANOVA, and paired t-test by the SPSS software. The significance level was set as 0.05. The Tukey test showed that there were significant differences between the load deflection rates of welded groups compared to control ones (P < 0.001). Considering the limitation of this study, the electric spot welding process performed on stainless steel and chromium-cobalt wires increased their load deflection rates.

  6. Construct validity and expert benchmarking of the haptic virtual reality dental simulator.

    PubMed

    Suebnukarn, Siriwan; Chaisombat, Monthalee; Kongpunwijit, Thanapohn; Rhienmora, Phattanapon

    2014-10-01

    The aim of this study was to demonstrate construct validation of the haptic virtual reality (VR) dental simulator and to define expert benchmarking criteria for skills assessment. Thirty-four self-selected participants (fourteen novices, fourteen intermediates, and six experts in endodontics) at one dental school performed ten repetitions of three mode tasks of endodontic cavity preparation: easy (mandibular premolar with one canal), medium (maxillary premolar with two canals), and hard (mandibular molar with three canals). The virtual instrument's path length was registered by the simulator. The outcomes were assessed by an expert. The error scores in easy and medium modes accurately distinguished the experts from novices and intermediates at the onset of training, when there was a significant difference between groups (ANOVA, p<0.05). The trend was consistent until trial 5. From trial 6 on, the three groups achieved similar scores. No significant difference was found between groups at the end of training. Error score analysis was not able to distinguish any group at the hard level of training. Instrument path length showed a difference in performance according to groups at the onset of training (ANOVA, p<0.05). This study established construct validity for the haptic VR dental simulator by demonstrating its discriminant capabilities between that of experts and non-experts. The experts' error scores and path length were used to define benchmarking criteria for optimal performance.

  7. Systematic methods for knowledge acquisition and expert system development

    NASA Technical Reports Server (NTRS)

    Belkin, Brenda L.; Stengel, Robert F.

    1991-01-01

    Nine cooperating rule-based systems, collectively called AUTOCREW which were designed to automate functions and decisions associated with a combat aircraft's subsystems, are discussed. The organization of tasks within each system is described; performance metrics were developed to evaluate the workload of each rule base and to assess the cooperation between the rule bases. Simulation and comparative workload results for two mission scenarios are given. The scenarios are inbound surface-to-air-missile attack on the aircraft and pilot incapacitation. The methodology used to develop the AUTOCREW knowledge bases is summarized. Issues involved in designing the navigation sensor selection expert in AUTOCREW's NAVIGATOR knowledge base are discussed in detail. The performance of seven navigation systems aiding a medium-accuracy INS was investigated using Kalman filter covariance analyses. A navigation sensor management (NSM) expert system was formulated from covariance simulation data using the analysis of variance (ANOVA) method and the ID3 algorithm. ANOVA results show that statistically different position accuracies are obtained when different navaids are used, the number of navaids aiding the INS is varied, the aircraft's trajectory is varied, and the performance history is varied. The ID3 algorithm determines the NSM expert's classification rules in the form of decision trees. The performance of these decision trees was assessed on two arbitrary trajectories, and the results demonstrate that the NSM expert adapts to new situations and provides reasonable estimates of the expected hybrid performance.

  8. Effect of saliva contamination on cementation of orthodontic brackets using different adhesive systems.

    PubMed

    Robaski, Aliden-Willian; Pamato, Saulo; Tomás-de Oliveira, Marcelo; Pereira, Jefferson-Ricardo

    2017-07-01

    The enamel condition and the quality of surface are points that need to be considered for achieving optimal efficiency in the treatment with orthodontic brackets. The aim of this study was to assess the immediate bond strength of metallic brackets cemented to dental. Forty human premolars were double-sectioned, placed in PVC matrices and randomly divided into 10 groups (n=8). They received artificial saliva contamination before or after the application of adhesive systems, except for the control groups. The metallic brackets were cemented using two orthodontic cements (Transbond™ Plus Color Change, 3M Unitek e Transbond™ XT Light, 3M Unitek). The specimens were subjected to mechanical shear bond strength testing and classified according to the fracture pattern. The results were analyzed using a two-way ANOVA and Tukey's test for multiple comparisons ( p <0.05). ANOVA analysis showed statistically significant differences between the groups ( p =0.01). The Tukey's multiple comparison test indicated statistically significant difference between G6 and G7 groups ( p <0.05). A high prevalence of adhesive failure in the groups receiving the hydrophobic adhesive system. The saliva contamination prior to the application of a hydrophobic simplified conventional adhesive system was responsible for decreasing the immediate bond strength values of brackets cemented on the dental enamel. Key words: Bonding, orthodontic brackets, shear bond strength, saliva, adhesive systems.

  9. Systematic methods for knowledge acquisition and expert system development

    NASA Technical Reports Server (NTRS)

    Belkin, Brenda L.; Stengel, Robert F.

    1991-01-01

    Nine cooperating rule-based systems, collectively called AUTOCREW, were designed to automate functions and decisions associated with a combat aircraft's subsystem. The organization of tasks within each system is described; performance metrics were developed to evaluate the workload of each rule base, and to assess the cooperation between the rule-bases. Each AUTOCREW subsystem is composed of several expert systems that perform specific tasks. AUTOCREW's NAVIGATOR was analyzed in detail to understand the difficulties involved in designing the system and to identify tools and methodologies that ease development. The NAVIGATOR determines optimal navigation strategies from a set of available sensors. A Navigation Sensor Management (NSM) expert system was systematically designed from Kalman filter covariance data; four ground-based, a satellite-based, and two on-board INS-aiding sensors were modeled and simulated to aid an INS. The NSM Expert was developed using the Analysis of Variance (ANOVA) and the ID3 algorithm. Navigation strategy selection is based on an RSS position error decision metric, which is computed from the covariance data. Results show that the NSM Expert predicts position error correctly between 45 and 100 percent of the time for a specified navaid configuration and aircraft trajectory. The NSM Expert adapts to new situations, and provides reasonable estimates of hybrid performance. The systematic nature of the ANOVA/ID3 method makes it broadly applicable to expert system design when experimental or simulation data is available.

  10. Interaction of Soil Heavy Metal Pollution with Industrialisation and the Landscape Pattern in Taiyuan City, China

    PubMed Central

    Liu, Yong; Su, Chao; Zhang, Hong; Li, Xiaoting; Pei, Jingfei

    2014-01-01

    Many studies indicated that industrialization and urbanization caused serious soil heavy metal pollution from industrialized age. However, fewer previous studies have conducted a combined analysis of the landscape pattern, urbanization, industrialization, and heavy metal pollution. This paper was aimed at exploring the relationships of heavy metals in the soil (Pb, Cu, Ni, As, Cd, Cr, Hg, and Zn) with landscape pattern, industrialisation, urbanisation in Taiyuan city using multivariate analysis. The multivariate analysis included correlation analysis, analysis of variance (ANOVA), independent-sample T test, and principal component analysis (PCA). Geographic information system (GIS) was also applied to determine the spatial distribution of the heavy metals. The spatial distribution maps showed that the heavy metal pollution of the soil was more serious in the centre of the study area. The results of the multivariate analysis indicated that the correlations among heavy metals were significant, and industrialisation could significantly affect the concentrations of some heavy metals. Landscape diversity showed a significant negative correlation with the heavy metal concentrations. The PCA showed that a two-factor model for heavy metal pollution, industrialisation, and the landscape pattern could effectively demonstrate the relationships between these variables. The model explained 86.71% of the total variance of the data. Moreover, the first factor was mainly loaded with the comprehensive pollution index (P), and the second factor was primarily loaded with landscape diversity and dominance (H and D). An ordination of 80 samples could show the pollution pattern of all the samples. The results revealed that local industrialisation caused heavy metal pollution of the soil, but such pollution could respond negatively to the landscape pattern. The results of the study could provide a basis for agricultural, suburban, and urban planning. PMID:25251460

  11. Interaction of soil heavy metal pollution with industrialisation and the landscape pattern in Taiyuan city, China.

    PubMed

    Liu, Yong; Su, Chao; Zhang, Hong; Li, Xiaoting; Pei, Jingfei

    2014-01-01

    Many studies indicated that industrialization and urbanization caused serious soil heavy metal pollution from industrialized age. However, fewer previous studies have conducted a combined analysis of the landscape pattern, urbanization, industrialization, and heavy metal pollution. This paper was aimed at exploring the relationships of heavy metals in the soil (Pb, Cu, Ni, As, Cd, Cr, Hg, and Zn) with landscape pattern, industrialisation, urbanisation in Taiyuan city using multivariate analysis. The multivariate analysis included correlation analysis, analysis of variance (ANOVA), independent-sample T test, and principal component analysis (PCA). Geographic information system (GIS) was also applied to determine the spatial distribution of the heavy metals. The spatial distribution maps showed that the heavy metal pollution of the soil was more serious in the centre of the study area. The results of the multivariate analysis indicated that the correlations among heavy metals were significant, and industrialisation could significantly affect the concentrations of some heavy metals. Landscape diversity showed a significant negative correlation with the heavy metal concentrations. The PCA showed that a two-factor model for heavy metal pollution, industrialisation, and the landscape pattern could effectively demonstrate the relationships between these variables. The model explained 86.71% of the total variance of the data. Moreover, the first factor was mainly loaded with the comprehensive pollution index (P), and the second factor was primarily loaded with landscape diversity and dominance (H and D). An ordination of 80 samples could show the pollution pattern of all the samples. The results revealed that local industrialisation caused heavy metal pollution of the soil, but such pollution could respond negatively to the landscape pattern. The results of the study could provide a basis for agricultural, suburban, and urban planning.

  12. Effect of Foot Hyperpronation on Lumbar Lordosis and Thoracic Kyphosis in Standing Position Using 3-Dimensional Ultrasound-Based Motion Analysis System

    PubMed Central

    Farokhmanesh, Khatere; Shirzadian, Toraj; Mahboubi, Mohammad; Shahri, Mina Neyakan

    2014-01-01

    Based on clinical observations, foot hyperpronation is very common. Excessive pronation (hyperpronation) can cause malalignment of the lower extremities. This most often leads to functional and structural deficits. The aim of this study was to assess the effect of foot hyperpronation on lumbar lordosis and thoracic kyphosis. Thirty five healthy subjects (age range, 18030 years) were asked to stand on 4 positions including a flat surface (normal position) and on wedges angled at 10, 15, and 20 degrees. Sampling was done using simple random sampling. Measurements were made by a motion analysis system. For data analysis, the SPSS software (ver. 18) using paired t-test and repeated measures analysis of variance (ANOVA) was applied. The eversion created by the wedges caused a significant increase in lumbar lordosis and thoracic kyphosis. The most significant change occurred between two consecutive positions of flat surface and the first wedge. The t-test for repeated measures showed a high correlation between each two consecutive positions. The results showed that with increased bilateral foot pronation, lumbar lordosis and thoracic kyphosis increased as well. In fact, each of these results is a compensation phenomenon. Further studies are required to determine long-term results of excessive foot pronation and its probable effect on damage progression. PMID:25169004

  13. Effect of foot hyperpronation on lumbar lordosis and thoracic kyphosis in standing position using 3-dimensional ultrasound-based motion analysis system.

    PubMed

    Farokhmanesh, Khatere; Shirzadian, Toraj; Mahboubi, Mohammad; Shahri, Mina Neyakan

    2014-06-17

    Based on clinical observations, foot hyperpronation is very common. Excessive pronation (hyperpronation) can cause malalignment of the lower extremities. This most often leads to functional and structural deficits. The aim of this study was to assess the effect of foot hyperpronation on lumbar lordosis and thoracic kyphosis. Thirty five healthy subjects (age range, 18030 years) were asked to stand on 4 positions including a flat surface (normal position) and on wedges angled at 10, 15, and 20 degrees. Sampling was done using simple random sampling. Measurements were made by a motion analysis system. For data analysis, the SPSS software (ver. 18) using paired t-test and repeated measures analysis of variance (ANOVA) was applied. The eversion created by the wedges caused a significant increase in lumbar lordosis and thoracic kyphosis. The most significant change occurred between two consecutive positions of flat surface and the first wedge. The t-test for repeated measures showed a high correlation between each two consecutive positions. The results showed that with increased bilateral foot pronation, lumbar lordosis and thoracic kyphosis increased as well. In fact, each of these results is a compensation phenomenon. Further studies are required to determine long-term results of excessive foot pronation and its probable effect on damage progression.

  14. Differences between immigrant and national students in motivational variables and classroom-motivational-climate perception.

    PubMed

    Alonso-Tapia, Jesús; Simón, Carmen

    2012-03-01

    The objective of this study is to see whether Immigrant (IM) and Spanish (National) students (SP) need different kinds of help from teachers due to differences in motivation, family expectancies and interests and classroom-motivational-climate perception. A sample of Secondary Students -242 Spanish and 243 Immigrants- completed questionnaires assessing goal orientations and expectancies, family attitudes towards academic work, perception of classroom motivational climate and of its effects, satisfaction, disruptive behavior and achievement. ANOVAs showed differences in many of the motivational variables assessed as well as in family attitudes. In most cases, Immigrant students scored lower than Spanish students in the relevant variables. Regression analyses showed that personal and family differences were related to student's satisfaction, achievement and disruptive behavior. Finally, multi-group analysis of classroom-motivational-climate (CMC) showed similarities and differences in the motivational value attributed by IM and SP to each specific teaching pattern that configure the CMC. IM lower self-esteem could explain these results, whose implications for teaching and research are discussed.

  15. Effect of exercise on cigarette cravings and ad libitum smoking following concurrent stressors.

    PubMed

    Fong, Angela J; De Jesus, Stefanie; Bray, Steven R; Prapavessis, Harry

    2014-10-01

    The health consequences of smoking are well documented, yet quit rates are modest. While exercise has supported decreased cravings and withdrawal symptoms in temporarily abstinent smokers, it has yet to be applied when smokers are experiencing concurrent stressors. This study examined the effect of an acute bout of moderate intensity exercise on cravings (primary outcome) and ad libitum smoking (secondary outcome) following concurrent stressors (i.e., temporary abstinence and environmental manipulation-Stroop cognitive task+cue-elicited smoking stimuli). Twenty-five smokers (>10cig/day; Mean age=37.4years) were randomized into either exercise (n=12) or passive sitting conditions. A repeated measure (RM) ANOVA showed that psychological withdrawal symptoms (a measure of distress) were significantly exacerbated after temporary abstinence and then again after the environmental manipulation for all participants (p<.0001, η(2)=.50). Furthermore, a treatment by time RM ANOVA revealed decreases in psychological withdrawal symptoms for only the exercise condition (p<.001, η(2)=.42). A treatment by time RM ANOVA also revealed craving reductions for only the exercise condition (p<.0001, η(2)=.82). Exercise had no effect on ad libitum smoking. This is the first study to use a lab-based scenario with high ecological validity to show that an acute bout of exercise can reduce cravings following concurrent stressors. Future work is now needed where momentary assessment is used in people's natural environment to examine changes in cigarette cravings following acute bouts of exercise. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Innovative Instrumentation and Analysis of the Temperature Measurement for High Temperature Gasification

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Seong W. Lee

    The project entitled, ''Innovative Instrumentation and Analysis of the Temperature Measurement for High Temperature Gasification'', was successfully completed by the Principal Investigator, Dr. S. Lee and his research team in the Center for Advanced Energy Systems and Environmental Control Technologies at Morgan State University. The major results and outcomes were presented in semi-annual progress reports and annual project review meetings/presentations. Specifically, the literature survey including the gasifier temperature measurement, the ultrasonic application in cleaning application, and spray coating process and the gasifier simulator (cold model) testing has been successfully conducted during the first year. The results show that four factorsmore » (blower voltage, ultrasonic application, injection time intervals, particle weight) were considered as significant factors that affect the temperature measurement. Then the gasifier simulator (hot model) design and the fabrication as well as the systematic tests on hot model were completed to test the significant factors on temperature measurement in the second year. The advanced Industrial analytic methods such as statistics-based experimental design, analysis of variance (ANOVA) and regression methods were applied in the hot model tests. The results show that operational parameters (i.e. air flow rate, water flow rate, fine dust particle amount, ammonia addition) presented significant impact on the temperature measurement inside the gasifier simulator. The experimental design and ANOVA are very efficient way to design and analyze the experiments. The results show that the air flow rate and fine dust particle amount are statistically significant to the temperature measurement. The regression model provided the functional relation between the temperature and these factors with substantial accuracy. In the last year of the project period, the ultrasonic and subsonic cleaning methods and coating materials were tested/applied on the thermocouple cleaning according to the proposed approach. Different frequency, application time and power of the ultrasonic/subsonic output were tested. The results show that the ultrasonic approach is one of the best methods to clean the thermocouple tips during the routine operation of the gasifier. In addition, the real time data acquisition system was also designed and applied in the experiments. This advanced instrumentation provided the efficient and accurate data acquisition for this project. In summary, the accomplishment of the project provided useful information of the ultrasonic cleaning method applied in thermocouple tip cleaning. The temperature measurement could be much improved both in accuracy and duration provided that the proposed approach is widely used in the gasification facilities.« less

  17. A Hybrid One-Way ANOVA Approach for the Robust and Efficient Estimation of Differential Gene Expression with Multiple Patterns

    PubMed Central

    Mollah, Mohammad Manir Hossain; Jamal, Rahman; Mokhtar, Norfilza Mohd; Harun, Roslan; Mollah, Md. Nurul Haque

    2015-01-01

    Background Identifying genes that are differentially expressed (DE) between two or more conditions with multiple patterns of expression is one of the primary objectives of gene expression data analysis. Several statistical approaches, including one-way analysis of variance (ANOVA), are used to identify DE genes. However, most of these methods provide misleading results for two or more conditions with multiple patterns of expression in the presence of outlying genes. In this paper, an attempt is made to develop a hybrid one-way ANOVA approach that unifies the robustness and efficiency of estimation using the minimum β-divergence method to overcome some problems that arise in the existing robust methods for both small- and large-sample cases with multiple patterns of expression. Results The proposed method relies on a β-weight function, which produces values between 0 and 1. The β-weight function with β = 0.2 is used as a measure of outlier detection. It assigns smaller weights (≥ 0) to outlying expressions and larger weights (≤ 1) to typical expressions. The distribution of the β-weights is used to calculate the cut-off point, which is compared to the observed β-weight of an expression to determine whether that gene expression is an outlier. This weight function plays a key role in unifying the robustness and efficiency of estimation in one-way ANOVA. Conclusion Analyses of simulated gene expression profiles revealed that all eight methods (ANOVA, SAM, LIMMA, EBarrays, eLNN, KW, robust BetaEB and proposed) perform almost identically for m = 2 conditions in the absence of outliers. However, the robust BetaEB method and the proposed method exhibited considerably better performance than the other six methods in the presence of outliers. In this case, the BetaEB method exhibited slightly better performance than the proposed method for the small-sample cases, but the the proposed method exhibited much better performance than the BetaEB method for both the small- and large-sample cases in the presence of more than 50% outlying genes. The proposed method also exhibited better performance than the other methods for m > 2 conditions with multiple patterns of expression, where the BetaEB was not extended for this condition. Therefore, the proposed approach would be more suitable and reliable on average for the identification of DE genes between two or more conditions with multiple patterns of expression. PMID:26413858

  18. Efficacy and Safety of Levosulpiride Versus Haloperidol Injection in Patients With Acute Psychosis: A Randomized Double-Blind Study.

    PubMed

    Lavania, Sagar; Praharaj, Samir Kumar; Bains, Hariender Singh; Sinha, Vishal; Kumar, Abhinav

    2016-01-01

    Injectable antipsychotics are frequently required for controlling agitation and aggression in acute psychosis. No study has examined the use of injectable levosulpiride for this indication. To compare the efficacy and safety of injectable levosulpiride and haloperidol in patients with acute psychosis. This was a randomized, double-blind, parallel-group study in which 60 drug-naive patients having acute psychosis were randomly assigned to receive either intramuscular haloperidol (10-20 mg/d) or levosulpiride (25-50 mg/d) for 5 days. All patients were rated on Brief Psychiatric Rating Scale (BPRS), Overt Agitation Severity Scale (OASS), Overt Aggression Scale-Modified (OAS-M) scores, Simpson Angus Scale (SAS), and Barnes Akathisia Rating Scale (BARS). Repeated-measures ANOVA for BPRS scores showed significant effect of time (P < 0.001) and a trend toward greater reduction in scores in haloperidol group as shown by group × time interaction (P = 0.076). Repeated-measures ANOVA for OASS showed significant effect of time (P < 0.001) but no group × time interaction. Repeated-measures ANOVA for OAS-M scores showed significant effect of time (P < 0.001) and greater reduction in scores in haloperidol group as shown by group × time interaction (P = 0.032). Lorazepam requirement was much lower in haloperidol group as compared with those receiving levosulpiride (P = 0.022). Higher rates of akathisia and extrapyramidal symptoms were noted in the haloperidol group. Haloperidol was more effective than levosulpiride injection for psychotic symptoms, aggression, and severity of agitation in acute psychosis, but extrapyramidal adverse effects were less frequent with levosulpiride as compared with those receiving haloperidol.

  19. SU-F-T-386: Analysis of Three QA Methods for Predicting Dose Deviation Pass Percentage for Lung SBRT VMAT Plans

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hardin, M; To, D; Giaddui, T

    2016-06-15

    Purpose: To investigate the significance of using pinpoint ionization chambers (IC) and RadCalc (RC) in determining the quality of lung SBRT VMAT plans with low dose deviation pass percentage (DDPP) as reported by ScandiDos Delta4 (D4). To quantify the relationship between DDPP and point dose deviations determined by IC (ICDD), RadCalc (RCDD), and median dose deviation reported by D4 (D4DD). Methods: Point dose deviations and D4 DDPP were compiled for 45 SBRT VMAT plans. Eighteen patients were treated on Varian Truebeam linear accelerators (linacs); the remaining 27 were treated on Elekta Synergy linacs with Agility collimators. A one-way analysis ofmore » variance (ANOVA) was performed to determine if there were any statistically significant differences between D4DD, ICDD, and RCDD. Tukey’s test was used to determine which pair of means was statistically different from each other. Multiple regression analysis was performed to determine if D4DD, ICDD, or RCDD are statistically significant predictors of DDPP. Results: Median DDPP, D4DD, ICDD, and RCDD were 80.5% (47.6%–99.2%), −0.3% (−2.0%–1.6%), 0.2% (−7.5%–6.3%), and 2.9% (−4.0%–19.7%), respectively. The ANOVA showed a statistically significant difference between D4DD, ICDD, and RCDD for a 95% confidence interval (p < 0.001). Tukey’s test revealed a statistically significant difference between two pairs of groups, RCDD-D4DD and RCDD-ICDD (p < 0.001), but no difference between ICDD-D4DD (p = 0.485). Multiple regression analysis revealed that ICDD (p = 0.04) and D4DD (p = 0.03) are statistically significant predictors of DDPP with an adjusted r{sup 2} of 0.115. Conclusion: This study shows ICDD predicts trends in D4 DDPP; however this trend is highly variable as shown by our low r{sup 2}. This work suggests that ICDD can be used as a method to verify DDPP in delivery of lung SBRT VMAT plans. RCDD may not validate low DDPP discovered in D4 QA for small field SBRT treatments.« less

  20. Combining chemometric tools for assessing hazard sources and factors acting simultaneously in contaminated areas. Case study: "Mar Piccolo" Taranto (South Italy).

    PubMed

    Mali, Matilda; Dell'Anna, Maria Michela; Notarnicola, Michele; Damiani, Leonardo; Mastrorilli, Piero

    2017-10-01

    Almost all marine coastal ecosystems possess complex structural and dynamic characteristics, which are influenced by anthropogenic causes and natural processes as well. Revealing the impact of sources and factors controlling the spatial distributions of contaminants within highly polluted areas is a fundamental propaedeutic step of their quality evaluation. Combination of different pattern recognition techniques, applied to one of the most polluted Mediterranean coastal basin, resulted in a more reliable hazard assessment. PCA/CA and factorial ANOVA were exploited as complementary techniques for apprehending the impact of multi-sources and multi-factors acting simultaneously and leading to similarities or differences in the spatial contamination pattern. The combination of PCA/CA and factorial ANOVA allowed, on one hand to determine the main processes and factors controlling the contamination trend within different layers and different basins, and, on the other hand, to ascertain possible synergistic effects. This approach showed the significance of a spatially representative overview given by the combination of PCA-CA/ANOVA in inferring the historical anthropogenic sources loading on the area. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Factors Influencing Stress, Burnout, and Retention of Secondary Teachers

    ERIC Educational Resources Information Center

    Fisher, Molly H.

    2011-01-01

    This study examines the stress, burnout, satisfaction, and preventive coping skills of nearly 400 secondary teachers to determine variables contributing to these major factors influencing teachers. Analysis of Variance (ANOVA) statistics were conducted that found the burnout levels between new and experienced teachers are significantly different,…

  2. Analyzing Randomized Controlled Interventions: Three Notes for Applied Linguists

    ERIC Educational Resources Information Center

    Vanhove, Jan

    2015-01-01

    I discuss three common practices that obfuscate or invalidate the statistical analysis of randomized controlled interventions in applied linguistics. These are (a) checking whether randomization produced groups that are balanced on a number of possibly relevant covariates, (b) using repeated measures ANOVA to analyze pretest-posttest designs, and…

  3. Identifying the Factors That Influence Change in SEBD Using Logistic Regression Analysis

    ERIC Educational Resources Information Center

    Camilleri, Liberato; Cefai, Carmel

    2013-01-01

    Multiple linear regression and ANOVA models are widely used in applications since they provide effective statistical tools for assessing the relationship between a continuous dependent variable and several predictors. However these models rely heavily on linearity and normality assumptions and they do not accommodate categorical dependent…

  4. Career Development in Language Education Programs

    ERIC Educational Resources Information Center

    Shawer, Saad Fathy; Alkahtani, Saad Ali

    2013-01-01

    This study assesses the influence of a two-year language program evaluation on program directors and faculty career development. The study makes use of mixed-paradigms (positivism and qualitative interpretive), mixed-strategies (survey research and qualitative evaluation), one-way analysis of variance (ANOVA) and a post-hoc test of multiple…

  5. The microcomputer scientific software series 2: general linear model--regression.

    Treesearch

    Harold M. Rauscher

    1983-01-01

    The general linear model regression (GLMR) program provides the microcomputer user with a sophisticated regression analysis capability. The output provides a regression ANOVA table, estimators of the regression model coefficients, their confidence intervals, confidence intervals around the predicted Y-values, residuals for plotting, a check for multicollinearity, a...

  6. Depression, stress and anxiety in medical students: A cross-sectional comparison between students from different semesters.

    PubMed

    Moutinho, Ivana Lúcia Damásio; Maddalena, Natalia de Castro Pecci; Roland, Ronald Kleinsorge; Lucchetti, Alessandra Lamas Granero; Tibiriçá, Sandra Helena Cerrato; Ezequiel, Oscarina da Silva; Lucchetti, Giancarlo

    2017-01-01

    To compare the prevalence of anxiety, depression, and stress in medical students from all semesters of a Brazilian medical school and assess their respective associated factors. A cross-sectional study of students from the twelve semesters of a Brazilian medical school was carried out. Students filled out a questionnaire including sociodemographics, religiosity (DUREL - Duke Religion Index), and mental health (DASS-21 - Depression, Anxiety, and Stress Scale). The students were compared for mental health variables (Chi-squared/ANOVA). Linear regression models were employed to assess factors associated with DASS-21 scores. 761 (75.4%) students answered the questionnaire; 34.6% reported depressive symptomatology, 37.2% showed anxiety symptoms, and 47.1% stress symptoms. Significant differences were found for: anxiety - ANOVA: [F = 2.536, p=0.004] between first and tenth (p=0.048) and first and eleventh (p=0.025) semesters; depression - ANOVA: [F = 2.410, p=0.006] between first and second semesters (p=0.045); and stress - ANOVA: [F = 2.968, p=0.001] between seventh and twelfth (p=0.044), tenth and twelfth (p=0.011), and eleventh and twelfth (p=0.001) semesters. The following factors were associated with (a) stress: female gender, anxiety, and depression; (b) depression: female gender, intrinsic religiosity, anxiety, and stress; and (c) anxiety: course semester, depression, and stress. Our findings revealed high levels of depression, anxiety, and stress symptoms in medical students, with marked differences among course semesters. Gender and religiosity appeared to influence the mental health of the medical students.

  7. The influence of teachers' conceptions on their students' learning: children's understanding of sheet music.

    PubMed

    López-Íñiguez, Guadalupe; Pozo, Juan Ignacio

    2014-06-01

    Despite increasing interest in teachers' and students' conceptions of learning and teaching, and how they influence their practice, there are few studies testing the influence of teachers' conceptions on their students' learning. This study tests how teaching conception (TC; with a distinction between direct and constructive) influences students' representations regarding sheet music. Sixty students (8-12 years old) from music conservatories: 30 of them took lessons with teachers with a constructive TC and another 30 with teachers shown to have a direct TC. Children were given a musical comprehension task in which they were asked to select and rank the contents they needed to learn. These contents had different levels of processing and complexity: symbolic, analytical, and referential. Three factorial ANOVAs, two-one-way ANOVAs, and four 2 × 3 repeated-measures ANOVAs were used to analyse the effects of and the interaction between the independent variables TC and class, both for/on total cards selected, their ranking, and each sub-category (the three processing levels). ANOVAs on the selection and ranking of these contents showed that teachers' conceptions seem to mediate significantly in the way the students understand the music. Students from constructive teachers have more complex and deep understanding of music. They select more elements for learning scores than those from traditional teachers. Teaching conception also influences the way in which children rank those elements. No difference exists between the way 8- and 12-year-olds learn scores. Children's understanding of the scores is more complex than assumed in other studies. © 2013 The British Psychological Society.

  8. Effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium castings.

    PubMed

    Zinelis, S

    2000-11-01

    Porosity is a frequently observed casting defect in dental titanium alloys. This study evaluated the effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium (cp Ti) castings. Eight groups (A-H) of 16 rectangular wax patterns each (30 mm in length, 3 mm in width, and 1 mm in depth) were prepared. The wax patterns were invested with a magnesia-based material and cast with cp Ti (grade II). Groups A, C, E, and G were cast under a pressure of 1 atm, and groups B, D, F, and H were cast under a pressure of 0.5 atm of He, Ar, Kr, and Xe, respectively. The extent of the porosity of the cast specimens was determined radiographically and quantified by image analysis. Three specimens of each group and 3 cylinders of the as-received cp Ti used as a reference were embedded in resin and studied metallographically after grinding, polishing, and chemical etching. These surfaces were used for determination of the Vickers hardness (VHN) as well. Eight specimens from each group were fractured in the tensile mode, and the 0.2% yield strength, fracture stress, and percentage elongation were calculated. Porosity was analyzed with 2-way ANOVA and the Newman-Keuls multiple range test. VHN measurements and tensile properties for specimen groups were compared with 1-way ANOVA and the Newman-Keuls multiple range test (95% significance level). The porosity levels per group were (%): A = 5.50 +/- 4.34, B = 0.77 +/- 1.27, C = 2.44 +/- 3.68, D = 0.06 +/- 0.12, E-H = 0. Two-way ANOVA showed that there was no detectable interaction (P<.05) between gas type and applied pressure. Metallographic examination revealed no differences in microstructure among the groups studied. A finer grain size was observed in all cast groups compared with the original cp Ti. The VHN of the as-received cp Ti was significantly greater than all the cast groups tested. Groups cast under He showed the highest VHN, yield strength, and fracture stress. No significant differences were found in percentage elongation values among the groups. Porosity and mechanical properties of cp Ti castings are dependent on the gas type and pressure, whereas the microstructure remains unaffected.

  9. Effects of a mutual recovery intervention on mental health in depressed elderly community-dwelling adults: a pilot study.

    PubMed

    Wang, Chao; Hua, Yujie; Fu, Hua; Cheng, Longfeng; Qian, Wen; Liu, Junyang; Crawford, Paul; Dai, Junming

    2017-01-03

    The prevalence of depression in the elderly is growing worldwide, and the population aging in China makes depression a major health problem for the elderly adults and a tremendous burden to the society. Effective interventions should be determined to provide an approach solving the problem and improving the situation. This study examined the effectiveness of a mutual recovery program intervention on depressive symptom, sleep quality, and well-being in community-dwelling elderly adults with depressive symptom in Shanghai. Recruitment was performed between July 2012 and August 2012. Using a cluster randomized wait-list controlled design, we randomized 6 communities (n = 237) into either the intervention group (3 communities, n = 105) or to a wait-list control group (3 communities, n = 132). All participants met the inclusion criteria for depression, which were defined by The Geriatric Depression Scale (GDS-15). From March to May of 2013, participants in the intervention group underwent a 2-month mutual recovery program intervention. The intervention included seven 90-min, weekly sessions that were based on a standardized self-designed schedule. Depression was used as primary outcome at three measurement moments: baseline (T1), before intervention at 24 weeks (T2), and immediately after intervention at 32 weeks (T3). Well-being and sleep quality were used as the secondary outcomes, and were evaluated based on the WHO-5 Well-being Index (WHO-5) and the Self-administered Sleep Questionnaire (SSQ). Finally, a total of 225 participants who completed all the sessions and the three measurements entered the final analysis. Mixed-model repeated measures ANOVAs were performed to estimate the intervention effects. There was no significant difference in gender, marriage, age structure, post-work type, and education background between the intervention and control group at baseline. Multivariate ANOVAs showed that there was no significant difference within the groups in terms of sleep, well-being, and depression at baseline and before the intervention. Mixed-model repeated measures ANOVAs detected a group × time interaction on depression, sleep, and well-being and showed a favorable intervention effect within groups immediately after the intervention. The mutual recovery program could be a creative and effective approach to improve mental health in older community-dwelling adults with depressive symptom.

  10. Generalizability Assessment of Autocorrelated Direct Observation Data: The Applicability of the Tiao-Tan Method and Alternative.

    ERIC Educational Resources Information Center

    Suen, Hoi K.; And Others

    The applicability is explored of the Bayesian random-effect analysis of variance (ANOVA) model developed by G. C. Tiao and W. Y. Tan (1966) and a method suggested by H. K. Suen and P. S. Lee (1987) for the generalizability analysis of autocorrelated data. According to Tiao and Tan, if time series data could be described as a first-order…

  11. Response format, magnitude of laterality effects, and sex differences in laterality.

    PubMed

    Voyer, Daniel; Doyle, Randi A

    2012-01-01

    The present study examined the evidence for the claim that response format might affect the magnitude of laterality effects by means of a meta-analysis. The analysis included the 396 effect sizes drawn from 266 studies retrieved by Voyer (1996) and relevant to the main effect of laterality and sex differences in laterality for verbal and non-verbal tasks in the auditory, tactile, and visual sensory modality. The response format used in specific studies was the only moderator variable of interest in the present analysis, resulting in four broad response categories (oral, written, computer, and pointing). A meta-analysis analogue to ANOVA showed no significant influence of response format on either the main effect of laterality or sex differences in laterality when all sensory modalities were combined. However, when modalities were considered separately, response format affected the main effect of laterality in the visual modality, with a clear advantage for written responses. Further pointed analyses revealed some specific differences among response formats. Results are discussed in terms of their implications for the measurement of laterality.

  12. A comparison of the effects of reflexology and relaxation on pain in women with multiple sclerosis.

    PubMed

    Nazari, Fatemeh; Soheili, Mozhgan; Hosseini, SayedMohsen; Shaygannejad, Vahid

    2016-03-01

    Pain is a common and significant symptom in many individuals with multiple sclerosis (MS). The presence and severity of pain in individuals with MS has also been shown to be associated with higher levels of depression, functional impairment, and fatigue. It is common for MS patients and their caregivers to worry about narcotic addiction in the management of chronic pain. Therefore, this study aimed to determine and compare the effects of reflexology and relaxation on pain in women suffering from MS. This study was a single-blind randomized clinical trial performed on 75 patients with MS referred to the MS Clinic of Ayatollah Kashani Hospital (Isfahan, Iran). After simple non-random sampling, using the minimization method, participants were randomly assigned to the three groups of reflexology, relaxation, and control. In the experimental groups, foot reflexology and relaxation interventions (Jacobson and Benson) were performed within 4 weeks, twice a week for 40 min. The control group received routine care and medical treatment as directed by a doctor. Data were collected using the Numerical Rating Scale before, immediately after, and 2 months after interventions in all three groups. Data analysis was performed using SPSS version 18 and descriptive and inferential statistical tests. Findings obtained from analysis of variance (ANOVA) showed no significant differences between mean pain intensity scores in the three groups preintervention and 2 months after interventions (p > 0.05). However, this difference was statistically significant immediately after the study (p < 0.05). Findings obtained from repeated measures ANOVA showed that the severity of pain significantly differed during different times in reflexology and relaxation (p < 0.05); however, this difference was not significant in the control group (p > 0.05). Furthermore, Fisher's least significant difference (LSD) revealed a significantly higher reduction in pain intensity scores in the reflexology group after the intervention, compared with the two other groups, but showed no significant differences between relaxation and control groups. There were no significant differences between the three groups 2 months after the interventions (p > 0.05). The results showed that both interventions are effective on relieving pain in women with MS; however, it appears that the effect of reflexology on pain reduction is greater than that of relaxation. Hence, these two methods can be recommended as effective techniques.

  13. Role of clinician's experience and implant design on implant stability. An ex vivo study in artificial soft bones.

    PubMed

    Romanos, Georgios E; Basha-Hijazi, Abdulaziz; Gupta, Bhumija; Ren, Yan-Fang; Malmstrom, Hans

    2014-04-01

    Clinical experience in implant placement is important in order to prevent implant failures. However, the implant design affects the primary implant stability (PS) especially in poor quality bones. Therefore, the aim of this study was to compare the effect of clinician surgical experience on PS, when placing different type of implant designs. A total of 180 implants (90 parallel walled-P and 90 tapered-T) were placed in freshly slaughtered cow ribs. Bone quality was evaluated by two examiners during surgery and considered as 'type IV' bone. Implants (ø 5 mm, length: 15 mm, Osseotite, BIOMET 3i, Palm Beach Gardens, FL, USA) were placed by three different clinicians (master/I, good/II, non-experienced/III, under direct supervision of a manufacturer representative; 30 implants/group). An independent observer assessed the accuracy of placement by resonance frequency analysis (RFA) with implant stability quotient (ISQ) values. Two-way analysis of variance (ANOVA) and Tukey's post hoc test were used to detect the surgical experience of the clinicians and their interaction and effects of implant design on the PS. All implants were mechanically stable. The mean ISQ values were: 49.57(± 18.49) for the P-implants and 67.07(± 8.79) for the T-implants. The two-way ANOVA showed significant effects of implant design (p < .0001), clinician (p < .0001), and their interaction (p < .0001). The Tukey's multiple comparison test showed significant differences in RFA for the clinician group I/II (p = .015) and highly significant (p < .0001) between I/III and II/III. The P-implants presented (for I, II, and III) mean ISQ values 31.25/49.18/68.17 and the T-implants showed higher ISQ values, 70.15/62.08/68.98, respectively. Clinicians I and II did not show extreme differences for T-implants (p = .016). In contrast, clinician III achieved high ISQ values using P- and T-implants following the exact surgical protocol based on the manufacturer guidelines. T-implants provided high stability for experienced clinicians compared with P-implants. T-implants achieved greater PS than the P-implants. All clinicians consistently achieved PS; however, experienced clinicians achieved higher ISQ values with T-implants in poor quality bone. © 2012 Wiley Periodicals, Inc.

  14. Comparing Methods to Assess Intraobserver Measurement Error of 3D Craniofacial Landmarks Using Geometric Morphometrics Through a Digitizer Arm.

    PubMed

    Menéndez, Lumila Paula

    2017-05-01

    Intraobserver error (INTRA-OE) is the difference between repeated measurements of the same variable made by the same observer. The objective of this work was to evaluate INTRA-OE from 3D landmarks registered with a Microscribe, in different datasets: (A) the 3D coordinates, (B) linear measurements calculated from A, and (C) the six-first principal component axes. INTRA-OE was analyzed by digitizing 42 landmarks from 23 skulls in three events two weeks apart from each other. Systematic error was tested through repeated measures ANOVA (ANOVA-RM), while random error through intraclass correlation coefficient. Results showed that the largest differences between the three observations were found in the first dataset. Some anatomical points like nasion, ectoconchion, temporosphenoparietal, asterion, and temporomandibular presented the highest INTRA-OE. In the second dataset, local distances had higher INTRA-OE than global distances while the third dataset showed the lowest INTRA-OE. © 2016 American Academy of Forensic Sciences.

  15. Virtual Reality simulator for dental anesthesia training in the inferior alveolar nerve block.

    PubMed

    Corrêa, Cléber Gimenez; Machado, Maria Aparecida de Andrade Moreira; Ranzini, Edith; Tori, Romero; Nunes, Fátima de Lourdes Santos

    2017-01-01

    This study shows the development and validation of a dental anesthesia-training simulator, specifically for the inferior alveolar nerve block (IANB). The system developed provides the tactile sensation of inserting a real needle in a human patient, using Virtual Reality (VR) techniques and a haptic device that can provide a perceived force feedback in the needle insertion task during the anesthesia procedure. To simulate a realistic anesthesia procedure, a Carpule syringe was coupled to a haptic device. The Volere method was used to elicit requirements from users in the Dentistry area; Repeated Measures Two-Way ANOVA (Analysis of Variance), Tukey post-hoc test and averages for the results' analysis. A questionnaire-based subjective evaluation method was applied to collect information about the simulator, and 26 people participated in the experiments (12 beginners, 12 at intermediate level, and 2 experts). The questionnaire included profile, preferences (number of viewpoints, texture of the objects, and haptic device handler), as well as visual (appearance, scale, and position of objects) and haptic aspects (motion space, tactile sensation, and motion reproduction). The visual aspect was considered appropriate and the haptic feedback must be improved, which the users can do by calibrating the virtual tissues' resistance. The evaluation of visual aspects was influenced by the participants' experience, according to ANOVA test (F=15.6, p=0.0002, with p<0.01). The user preferences were the simulator with two viewpoints, objects with texture based on images and the device with a syringe coupled to it. The simulation was considered thoroughly satisfactory for the anesthesia training, considering the needle insertion task, which includes the correct insertion point and depth, as well as the perception of tissues resistances during the insertion.

  16. Integrated Curriculum and Subject-based Curriculum: Achievement and Attitudes

    NASA Astrophysics Data System (ADS)

    Casady, Victoria

    The research conducted for this mixed-method study, qualitative and quantitative, analyzed the results of an academic year-long study to determine whether the use of an integrated fourth grade curriculum would benefit student achievement in the areas of English language arts, social studies, and science more than a subject-based traditional curriculum. The research was conducted based on the international, national, and state test scores, which show a slowing or lack of growth. Through pre- and post-assessments, student questionnaires, and administrative interviews, the researcher analyzed the phenomenological experiences of the students to determine if the integrated curriculum was a beneficial restructuring of the curriculum. The research questions for this study focused on the achievement and attitudes of the students in the study and whether the curriculum they were taught impacted their achievement and attitudes over the course of one school year. The curricula for the study were organized to cover the current standards, where the integrated curriculum focused on connections between subject areas to help students make connections to what they are learning and the world beyond the classroom. The findings of this study indicated that utilizing the integrated curriculum could increase achievement as well as students' attitudes toward specific content areas. The ANOVA analysis for English language arts was not determined to be significant; although, greater growth in the students from the integrated curriculum setting was recorded. The ANOVA for social studies (0.05) and the paired t-tests (0.001) for science both determined significant positive differences. The qualitative analysis led to the discovery that the experiences of the students from the integrated curriculum setting were more positive. The evaluation of the data from this study led the researcher to determine that the integrated curriculum was a worthwhile endeavor to increase achievement and attitudes in fourth grade students.

  17. Comparison of fracture resistance between cast, CAD/CAM milling, and direct metal laser sintering metal post systems.

    PubMed

    Bilgin, Mehmet Selim; Erdem, Ali; Dilber, Erhan; Ersoy, İbrahim

    2016-01-01

    The purpose of this study was to compare the fracture resistance of Co-Cr post-cores fabricated with 3 different techniques: traditional casting (TC), computer-aided design and manufacturing (CAD/CAM) milling (CCM) and direct metal laser sintering (DMLS). Forty intact human mandibular premolar were endodontically treated. The roots were then randomly divided into four groups according to the post systems: the control group was only filled with gutta percha. Co-Cr metal posts were fabricated with TC, CCM and DMLS in the other three groups. The posts were luted with a resin cement and subjected to compression test at a crosshead speed of 1mm/min. The statistical analysis of the data was performed using one-way analysis of variance (ANOVA) and multiple comparison post hoc Tukey tests (α=.05). The samples were examined under a stereomicroscope with ×20 magnification for the evaluation of the fracture types. The mean fracture loads were 432.69 N for control, 608.89 N for TC, 689.40 N for DMLS and 959.26 N for CCM. One-way ANOVA revealed significant difference between the groups (p<0.01). In the post hoc Tukey test, there were significant differences between groups except DMLS and TC. While Co-Cr posts fabricated by TC and DMLS systems performed similarly in terms of fracture resistance, posts fabricated by CCM techniques showed higher fracture resistance values. Co-Cr metal posts fabricated by CCM and DMLS could be an alternative to TC processing in daily clinical application. Copyright © 2015 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  18. Extended spectrum beta lactamase (ESBL) producing bacteria urinary tract infections and complex pediatric urology.

    PubMed

    Wragg, Ruth; Harris, Anna; Patel, Mitul; Robb, Andrew; Chandran, Harish; McCarthy, Liam

    2017-02-01

    Extended spectrum beta lactamase (ESBL) producing bacteria are resistant to most beta-lactam antibiotics including third-generation cephalosporins, quinolones and aminoglycosides. This resistance is plasmid-borne and can spread between species. Management of ESBL is challenging in children with recurrent urinary tract infections (UTIs) and complex urological abnormalities. We aim to quantify the risk in children and specifically in urological patients. Retrospective review of a microbiology database (April 2014 to November 2015). This identified urine isolates, pyuria, ESBL growth and patient demographics. Data analysis was by Chi square, Mann-Whitney U-test and ANOVA. A P value of <0.05 was taken as significant. Analysis of 9418 urine samples showed 2619 with pure isolates, of which 1577 had pyuria (>10×10 6 WC/L). 136 urine cultures (n=79 patients) grew purely ESBL. Overall, 5.2% of urine isolates were ESBL and 9.5% isolates with pyuria (>100×10 6 WC/L) had ESBL, whereas only 22/1032 (2.1%) with no pyuria, (P<0.0001). Urology patients had 86/136 (63%) ESBL positive cultures. These represented 86/315 (27%) of all positive cultures for urology patients vs. 50/2267 (2.2%) for all other specialties (P<0.0001). Potential ESBL transmission between organisms occurred in 3 (all on prophylactic antibiotics). Over the study period, there was no significant rise of the monthly incidence between 2014 and 2015 (ANOVA P=0.1). This study is the first to document the incidence of ESBL in children (5%), and estimate the frequency of possible plasmid transmission between bacterial species in children. This quantifies the risk of ESBL, especially to urology patients, and mandates better antibiotic stewardship. Level IIc. Copyright © 2017. Published by Elsevier Inc.

  19. Nutritional status of cancer patients admitted for chemotherapy at the National Kidney and Transplant Institute.

    PubMed

    Montoya, J E; Domingo, F; Luna, C A; Berroya, R M; Catli, C A; Ginete, J K; Sanchez, O S; Juat, N J; Tiangco, B J; Jamias, J D

    2010-11-01

    Malnutrition is common among cancer patients. This study aimed to determine the overall prevalence of malnutrition among patients undergoing chemotherapy and to determine the predictors of malnutrition among cancer patients. A cross-sectional study was conducted on 88 cancer patients admitted for chemotherapy at the National Kidney and Transplant Institute, Philippines, from October to November 2009. Subjective Global Assessment (SGA), anthropometric data and demographic variables were obtained. Descriptive statistics, ANOVA and logistic regression analysis were performed between the outcome and variables. A total of 88 cancer patients were included in the study. The mean age of the patients was 55.7 +/- 14.8 years. The mean duration of illness was 9.7 +/- 8.7 months and the mean body mass index (BMI) was 22.9 kg/m2. The mean Karnofsky performance status was 79.3. 29.55 percent of the patients had breast cancer as the aetiology of their illness. 38 patients (43.2 percent) had SGA B and four (4.5 percent) had SGA C, giving a total malnutrition prevalence of 47.7 percent. The patients were statistically different with regard to their cancer stage (p is less than 0.001), weight (p is 0.01), BMI (p is 0.004), haemoglobin level (p is 0.001) and performance status by Karnofsky score (p is less than 0.001), as evaluated by ANOVA. Logistic regression analysis showed that cancer stage and Karnofsky performance score were predictors of malnutrition. About 47.7 percent of cancer patients suffer from malnutrition, as classified by SGA. Only cancer stage and Karnofsky performance status scoring were predictive of malnutrition in this select group of patients.

  20. Nasal airway and septal variation in unilateral and bilateral cleft lip and palate.

    PubMed

    Starbuck, John M; Friel, Michael T; Ghoneima, Ahmed; Flores, Roberto L; Tholpady, Sunil; Kula, Katherine

    2014-10-01

    Cleft lip and palate (CLP) affects the dentoalveolar and nasolabial facial regions. Internal and external nasal dysmorphology may persist in individuals born with CLP despite surgical interventions. 7-18 year old individuals born with unilateral and bilateral CLP (n = 50) were retrospectively assessed using cone beam computed tomography. Anterior, middle, and posterior nasal airway volumes were measured on each facial side. Septal deviation was measured at the anterior and posterior nasal spine, and the midpoint between these two locations. Data were evaluated using principal components analysis (PCA), multivariate analysis of variance (MANOVA), and post-hoc ANOVA tests. PCA results show partial separation in high dimensional space along PC1 (48.5% variance) based on age groups and partial separation along PC2 (29.8% variance) based on CLP type and septal deviation patterns. MANOVA results indicate that age (P = 0.007) and CLP type (P ≤ 0.001) significantly affect nasal airway volume and septal deviation. ANOVA results indicate that anterior nasal volume is significantly affected by age (P ≤ 0.001), whereas septal deviation patterns are significantly affected by CLP type (P ≤ 0.001). Age and CLP type affect nasal airway volume and septal deviation patterns. Nasal airway volumes tend to be reduced on the clefted sides of the face relative to non-clefted sides of the face. Nasal airway volumes tend to strongly increase with age, whereas septal deviation values tend to increase only slightly with age. These results suggest that functional nasal breathing may be impaired in individuals born with the unilateral and bilateral CLP deformity. © 2014 Wiley Periodicals, Inc.

  1. The Effect of Different Chemical Surface Treatments of Denture Teeth on Shear Bond Strength: A Comparative Study

    PubMed Central

    Palekar, Umesh; Awinashe, Vaibav; Mishra, Sunil Kumar; Kawadkar, Abhishek; Rahangdale, Tripti

    2014-01-01

    Background: The development of better cross linked acrylic resin teeth has solved the problems related to wearing and discoloration of acrylic teeth. The same cross linking at ridge lap region acts as a double edge sword as it weakens the bond between denture base and tooth. Aim of Study: The purpose of study was to evaluate the effect of surface treatment on the bond strength of resin teeth to denture base resin using monomethyl methacrylate monomer and dichloromethane with no surface treatment acting as control. Settings and Design:Denture base cylinder samples in wax (n=180) were made with maxillary central incisor attached at 450 (JIST 6506). These samples were randomly and equally divided into three groups of 60 each. These specimens were then flasked, dewaxed as per the standard protocol. Materials and Methods: Before acrylization, ridge lap area was treated as follows: Group A- no surface treatment act as control, Group B treated with monomethyl methacrylate monomer, Group C treated with dichloromethane. Digitally controlled acryliser was used for acrylization as per manufacturer’s instructions and shear bond strength was tested on Universal Testing Machine (Servo Hydraulic, 50kN High Strain, BISS Research). Statistical Analysis used: Result was statistically analyzed with One-way analysis of variance (ANOVA) and Post-hoc ANOVA Tukey’s HSD test at 5% level of significance. Results: The application of dichloromethane showed increased bond strength between cross linked acrylic resin teeth and heat cure denture base resin followed by monomethyl methacrylate monomer and control group. Conclusion: The application of dichloromethane on the ridge lap surface of the resin teeth before packing of the dough into the mold significantly increased the bond strength between cross linked acrylic resin teeth and heat cure denture base resin. PMID:25121057

  2. A comparative study of the svm and k-nn machine learning algorithms for the diagnosis of respiratory pathologies using pulmonary acoustic signals

    PubMed Central

    2014-01-01

    Background Pulmonary acoustic parameters extracted from recorded respiratory sounds provide valuable information for the detection of respiratory pathologies. The automated analysis of pulmonary acoustic signals can serve as a differential diagnosis tool for medical professionals, a learning tool for medical students, and a self-management tool for patients. In this context, we intend to evaluate and compare the performance of the support vector machine (SVM) and K-nearest neighbour (K-nn) classifiers in diagnosis respiratory pathologies using respiratory sounds from R.A.L.E database. Results The pulmonary acoustic signals used in this study were obtained from the R.A.L.E lung sound database. The pulmonary acoustic signals were manually categorised into three different groups, namely normal, airway obstruction pathology, and parenchymal pathology. The mel-frequency cepstral coefficient (MFCC) features were extracted from the pre-processed pulmonary acoustic signals. The MFCC features were analysed by one-way ANOVA and then fed separately into the SVM and K-nn classifiers. The performances of the classifiers were analysed using the confusion matrix technique. The statistical analysis of the MFCC features using one-way ANOVA showed that the extracted MFCC features are significantly different (p < 0.001). The classification accuracies of the SVM and K-nn classifiers were found to be 92.19% and 98.26%, respectively. Conclusion Although the data used to train and test the classifiers are limited, the classification accuracies found are satisfactory. The K-nn classifier was better than the SVM classifier for the discrimination of pulmonary acoustic signals from pathological and normal subjects obtained from the RALE database. PMID:24970564

  3. A comparative study of the SVM and K-nn machine learning algorithms for the diagnosis of respiratory pathologies using pulmonary acoustic signals.

    PubMed

    Palaniappan, Rajkumar; Sundaraj, Kenneth; Sundaraj, Sebastian

    2014-06-27

    Pulmonary acoustic parameters extracted from recorded respiratory sounds provide valuable information for the detection of respiratory pathologies. The automated analysis of pulmonary acoustic signals can serve as a differential diagnosis tool for medical professionals, a learning tool for medical students, and a self-management tool for patients. In this context, we intend to evaluate and compare the performance of the support vector machine (SVM) and K-nearest neighbour (K-nn) classifiers in diagnosis respiratory pathologies using respiratory sounds from R.A.L.E database. The pulmonary acoustic signals used in this study were obtained from the R.A.L.E lung sound database. The pulmonary acoustic signals were manually categorised into three different groups, namely normal, airway obstruction pathology, and parenchymal pathology. The mel-frequency cepstral coefficient (MFCC) features were extracted from the pre-processed pulmonary acoustic signals. The MFCC features were analysed by one-way ANOVA and then fed separately into the SVM and K-nn classifiers. The performances of the classifiers were analysed using the confusion matrix technique. The statistical analysis of the MFCC features using one-way ANOVA showed that the extracted MFCC features are significantly different (p < 0.001). The classification accuracies of the SVM and K-nn classifiers were found to be 92.19% and 98.26%, respectively. Although the data used to train and test the classifiers are limited, the classification accuracies found are satisfactory. The K-nn classifier was better than the SVM classifier for the discrimination of pulmonary acoustic signals from pathological and normal subjects obtained from the RALE database.

  4. Reduced basis ANOVA methods for partial differential equations with high-dimensional random inputs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liao, Qifeng, E-mail: liaoqf@shanghaitech.edu.cn; Lin, Guang, E-mail: guanglin@purdue.edu

    2016-07-15

    In this paper we present a reduced basis ANOVA approach for partial deferential equations (PDEs) with random inputs. The ANOVA method combined with stochastic collocation methods provides model reduction in high-dimensional parameter space through decomposing high-dimensional inputs into unions of low-dimensional inputs. In this work, to further reduce the computational cost, we investigate spatial low-rank structures in the ANOVA-collocation method, and develop efficient spatial model reduction techniques using hierarchically generated reduced bases. We present a general mathematical framework of the methodology, validate its accuracy and demonstrate its efficiency with numerical experiments.

  5. Comparison of exercise capacity in COPD and other etiologies of chronic respiratory failure requiring non-invasive mechanical ventilation at home: retrospective analysis of 1-year follow-up.

    PubMed

    Salturk, Cuneyt; Karakurt, Zuhal; Takir, Huriye Berk; Balci, Merih; Kargin, Feyza; Mocin, Ozlem Yazıcıoglu; Gungor, Gokay; Ozmen, Ipek; Oztas, Selahattin; Yalcinsoy, Murat; Evin, Ruya; Ozturk, Murat; Adiguzel, Nalan

    2015-01-01

    The objective of this study was to compare the change in 6-minute walking distance (6MWD) in 1 year as an indicator of exercise capacity among patients undergoing home non-invasive mechanical ventilation (NIMV) due to chronic hypercapnic respiratory failure (CHRF) caused by different etiologies. This retrospective cohort study was conducted in a tertiary pulmonary disease hospital in patients who had completed 1-year follow-up under home NIMV because of CHRF with different etiologies (ie, chronic obstructive pulmonary disease [COPD], obesity hypoventilation syndrome [OHS], kyphoscoliosis [KS], and diffuse parenchymal lung disease [DPLD]), between January 2011 and January 2012. The results of arterial blood gas (ABG) analyses and spirometry, and 6MWD measurements with 12-month interval were recorded from the patient files, in addition to demographics, comorbidities, and body mass indices. The groups were compared in terms of 6MWD via analysis of variance (ANOVA) and multiple linear regression (MLR) analysis (independent variables: analysis age, sex, baseline 6MWD, baseline forced expiratory volume in 1 second, and baseline partial carbon dioxide pressure, in reference to COPD group). A total of 105 patients with a mean age (± standard deviation) of 61±12 years of whom 37 had COPD, 34 had OHS, 20 had KS, and 14 had DPLD were included in statistical analysis. There were no significant differences between groups in the baseline and delta values of ABG and spirometry findings. Both univariate ANOVA and MLR showed that the OHS group had the lowest baseline 6MWD and the highest decrease in 1 year (linear regression coefficient -24.48; 95% CI -48.74 to -0.21, P=0.048); while the KS group had the best baseline values and the biggest improvement under home NIMV (linear regression coefficient 26.94; 95% CI -3.79 to 57.66, P=0.085). The 6MWD measurements revealed improvement in exercise capacity test in CHRF patients receiving home NIMV treatment on long-term depends on etiological diagnoses.

  6. Detection of the airway obstruction stage in asthma using impulse oscillometry system.

    PubMed

    Qi, Guang-Sheng; Zhou, Zhi-Cai; Gu, Wen-Chao; Xi, Feng; Wu, Hao; Yang, Wen-Lan; Liu, Jin-Ming

    2013-02-01

    Although spirometry is the most common method for evaluating the airway obstruction stage in asthma patients, it is difficult to perform in some patients. The aim of this study was to evaluate whether impulse oscillometry, an easy-to-perform technique, can detect asthmatic airway obstruction stage. A total of 80 subjects, including healthy volunteers and patients with asthma, were enrolled in this study. The asthma patients were classified into three groups according to American Thoracic Society (ATS)/European Respiratory Society (ERS)-2005: the mild group (forced expiratory volume in 1 second (FEV(1)) ≥ 70% predicted (Pred), n = 20), the moderate group (50% Pred ≤ FEV(1) <70% Pred, n = 20), and the severe group (FEV(1) < 50% Pred, n = 20). Spirometry and impulse oscillometry (IOS) parameters were obtained from every subject. Correlation analysis was used to compare spirometry measurements and IOS parameters. One-way analysis of variance (ANOVA) was performed to compare IOS parameters among different groups. The potential of using all individual IOS parameters to detect the different stages of asthmatic airway obstruction was evaluated by the receiver operating characteristic (ROC) curve analysis. The correlation analysis showed that IOS parameters, such as respiratory resistance at 5 Hz (R(5)), respiratory resistance at 10 Hz (R(10)), respiratory resistance at 20 Hz (R(20)), difference in resistance between 5 Hz and 20 Hz (R(5-20)), impedance at 5 Hz (Z(5)), resonant frequency (Fres), and area of reactance (AX) were negatively correlated with FEV(1) and peak expiratory flow (PEF), while reactance at 5 Hz (X(5)) was positively correlated with FEV(1) and PEF. The increase in R(5), R(10), R(20), Z(5), R(5-20), Fres, (-X(5)), and AX parameters corresponded significantly with an increase in the airway obstruction stage, as determined by one-way ANOVA . ROC curve analysis revealed that all the IOS parameters studied, except for Fres, were capable of classifying asthmatic airway obstruction. R(5), R(5-20), and Z(5) were the most accurate parameters. IOS provides an accurate, reliable, and patient-friendly technique for classifying asthmatic airway obstruction.

  7. Which is the best method of sterilization for recycled bone autograft in limb salvage surgery: a radiological, biomechanical and histopathological study in rabbit.

    PubMed

    Yasin, Nor Faissal; Ajit Singh, Vivek; Saad, Marniza; Omar, Effat

    2015-04-15

    Limb salvage surgery is a treatment of choice for sarcomas of the extremities. One of the options in skeletal reconstruction after tumour resection is by using a recycled bone autograft. The present accepted methods of recycling bone autografts include autoclaving, pasteurization and irradiation. At the moment there is lack of studies that compare the effectiveness of various sterilization methods used for recycling bone autografts and their effects in terms of bone incorporation. This study was performed to determine the effects of different methods of sterilization on bone autografts in rabbit by radiological, biomechanical and histopathological evaluations. Fresh rabbit cortical bone is harvested from the tibial diaphysis and sterilized extracorporeally by pasteurization (n = 6), autoclaving (n = 6), irradiation (n = 6) and normal saline as control group (n = 6). The cortical bones were immediately reimplanted after the sterilization process. The subsequent process of graft incorporation was examined over a period of 12 weeks by serial radiographs, biomechanical and histopathological evaluations. Statistical analysis (ANOVA) was performed on these results. Significance level (α) and power (β) were set to 0.05 and 0.90, respectively. Radiographic analysis showed that irradiation group has higher score in bony union compared to other sterilization groups (p = 0.041). ANOVA analysis of 'failure stress', 'modulus' and 'strain to failure' demonstrated no significant differences (p = 0.389) between treated and untreated specimens under mechanical loading. In macroscopic histopathological analysis, the irradiated group has the highest percentage of bony union (91.7 percent). However in microscopic analysis of union, the pasteurization group has significantly higher score (p = 0.041) in callus formation, osteocytes percentage and bone marrow cellularity at the end of the study indicating good union potential. This experimental study shown that both irradiation and pasteurization techniques have more favourable outcome in terms of bony union based on radiographic and histopathological evaluations. Autoclaving has the worst outcome. These results indicate that extracorporeal irradiation or pasteurization of bone autografts, are viable option for recycling bone autografts. However, pasteurization has the best overall outcomes because of its osteocytes preservation and bone marrow cellularity.

  8. Reinforcing Sampling Distributions through a Randomization-Based Activity for Introducing ANOVA

    ERIC Educational Resources Information Center

    Taylor, Laura; Doehler, Kirsten

    2015-01-01

    This paper examines the use of a randomization-based activity to introduce the ANOVA F-test to students. The two main goals of this activity are to successfully teach students to comprehend ANOVA F-tests and to increase student comprehension of sampling distributions. Four sections of students in an advanced introductory statistics course…

  9. Scheduling Anesthesia Time Reduces Case Cancellations and Improves Operating Room Workflow in a University Hospital Setting.

    PubMed

    van Veen-Berkx, Elizabeth; van Dijk, Menno V; Cornelisse, Diederich C; Kazemier, Geert; Mokken, Fleur C

    2016-08-01

    A new method of scheduling anesthesia-controlled time (ACT) was implemented on July 1, 2012 in an academic inpatient operating room (OR) department. This study examined the relationship between this new scheduling method and OR performance. The new method comprised the development of predetermined time frames per anesthetic technique based on historical data of the actual time needed for anesthesia induction and emergence. Seven "anesthesia scheduling packages" (0 to 6) were established. Several options based on the quantity of anesthesia monitoring and the complexity of the patient were differentiated in time within each package. This was a quasi-experimental time-series design. Relevant data were divided into 4 equal periods of time. These time periods were compared with ANOVA with contrast analysis: an intervention, pre-intervention, and post-intervention contrast were tested. All emergency cases were excluded. A total of 34,976 inpatient elective cases performed from January 1, 2010 to December 31, 2014 were included for statistical analyses. The intervention contrast showed a significant decrease (p < 0.001) of 4.5% in the prediction error. The total number of cancellations decreased to 19.9%. The ANOVA with contrast analyses showed no significant differences with respect to under- and over-used OR time and raw use. Unanticipated results derived from this study, allowing for a smoother workflow: eg anesthesia nurses know exactly which medical equipment and devices need to be assembled and tested beforehand, based on the scheduled anesthesia package. Scheduling the 2 major components of a procedure (anesthesia- and surgeon-controlled time) more accurately leads to fewer case cancellations, lower prediction errors, and smoother OR workflow in a university hospital setting. Copyright © 2016 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

  10. Effects of streptozotocin-induced diabetes on bladder and erectile (dys)function in the same rat in vivo.

    PubMed

    Christ, George J; Hsieh, Yi; Zhao, Weixin; Schenk, Gregory; Venkateswarlu, Karicheti; Wang, Hong-Zhan; Tar, Moses T; Melman, Arnold

    2006-05-01

    To establish the methods, feasibility and utility of evaluating the impact of diabetes on bladder and erectile function in the same rat, as more than half of diabetic patients have bladder dysfunction, and half of diabetic men have erectile dysfunction, but the severity of coincident disease has not been rigorously assessed. In all, 16 F-344 rats had diabetes induced by streptozotocin (STZ), and were divided into insulin-treated (five) and untreated (11), and compared with age-matched controls (10), all assessed in parallel. All STZ rats were diabetic for 8-11 weeks. Cystometric studies were conducted on all rats, with cavernosometric studies conducted on a subset of rats. There were insulin-reversible increases in the following cystometric variables; bladder weight, bladder capacity, micturition volume, residual volume, micturition pressure and spontaneous activity (P < 0.05, in all, one-way analysis of variance, anova). Cavernosometry showed a diabetes-related, insulin-reversible decline in the cavernosal nerve-stimulated intracavernosal pressure (ICP) response at all levels of current stimulation (P < 0.05, in all one-way anova). Plotting erectile capacity (i.e. ICP) against bladder capacity showed no correlation between the extent of the decline in erectile capacity and the magnitude of the increase in bladder capacity. These studies extend previous work to indicate that the extent of diabetes-related bladder and erectile dysfunction can vary in the same rat. As such, these findings highlight the importance of evaluating the impact of diabetes on multiple organ systems in the lower urinary tract. Future studies using this model system should lead to a better understanding of the initiation, development, progression and coincidence of these common diabetic complications.

  11. Leucine-rich amelogenin peptide (LRAP) as a surface primer for biomimetic remineralization of superficial enamel defects: An in vitro study.

    PubMed

    Shafiei, Farhad; Hossein, Bagheri G; Farajollahi, Mohammad M; Fathollah, Moztarzadeh; Marjan, Behroozibakhsh; Tahereh, Jafarzadeh Kashi

    2015-01-01

    This study was carried out to obtain more information about the assembly of hydroxyapatite bundles formed in the presence of Leucine-Rich Amelogenin Peptide (LRAP) and to evaluate its effect on the remineralization of enamel defects through a biomimetic approach. One or 2 mg/mL LRAP solutions containing 2.5 mM of Ca(+2) and 1.5 mM phosphate were prepared (pH = 7.2) and stored at 37 °C for 24 h. The products of the reaction were studied using atomic force microscopy (AFM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). Vickers surface microhardness recovery (SMR%) of acid-etched bovine enamel, with or without LRAP surface treatment, were calculated to evaluate the influence of peptide on the lesion remineralization. Distilled water and 1 or 2 mg/mL LRAP solution (pH = 7.2) were applied on the lesions and the specimens were incubated in mineralization solution (2.5mM Ca(+2) , 1.5mM PO4 (-3) , pH = 7.2) for 24 h. One-way ANOVA and Tukey's multi-comparison tests were used for statistical analysis. The pattern of enamel surface repair was studied using FE-SEM. AFM showed the formation of highly organized hierarchical structures, composed of hydroxyapatite (HA) crystals, similar to the dental enamel microstructure. ANOVA procedure showed significant effect of peptide treatment on the calculated SMR% (p < 0.001). Tukey's test revealed that peptide treated groups had significantly higher values of SMR%. In conclusion, LRAP is able to regulate the formation of HA and enhances the remineralization of acid-etched enamel as a surface treatment agent. © Wiley Periodicals, Inc.

  12. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials

    PubMed Central

    Güngör, Merve Bankoğlu; Bal, Bilge Turhan; Ünver, Senem; Doğan, Aylin

    2016-01-01

    PURPOSE The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS 120 specimens (10×10×2 mm) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with 125 µm grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin. PMID:27555894

  13. Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique.

    PubMed

    Alqahtani, Fawaz

    2017-01-01

    The purpose of this study was to determine the effect of two extraoral computer-aided design (CAD) and computer-aided manufacturing (CAM) systems, in comparison with conventional techniques, on the marginal fit of monolithic CAD/CAM lithium disilicate ceramic crowns. This is an in vitro interventional study. The study was carried out at the Department of Prosthodontics, School of Dentistry, Prince Sattam Bin Abdul-Aziz University, Saudi Arabia, from December 2015 to April 2016. A marginal gap of 60 lithium disilicate crowns was evaluated by scanning electron microscopy. In total, 20 pressable lithium disilicate (IPS e.max Press [Ivoclar Vivadent]) ceramic crowns were fabricated using the conventional lost-wax technique as a control group. The experimental all-ceramic crowns were produced based on a scan stone model and milled using two extraoral CAD/CAM systems: the Cerec group was fabricated using the Cerec CAD/CAM system, and the Trios group was fabricated using Trios CAD and milled using Wieland Zenotec CAM. One-way analysis of variance (ANOVA) and the Scheffe post hoc test were used for statistical comparison of the groups (α=0.05). The mean (±standard deviation) of the marginal gap of each group was as follows: the Control group was 91.15 (±15.35) µm, the Cerec group was 111.07 (±6.33) µm, and the Trios group was 60.17 (±11.09) µm. One-way ANOVA and the Scheffe post hoc test showed a statistically significant difference in the marginal gap between all groups. It can be concluded from the current study that all-ceramic crowns, fabricated using the CAD/CAM system, show a marginal accuracy that is acceptable in clinical environments. The Trios CAD group displayed the smallest marginal gap.

  14. The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment.

    PubMed

    de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

    2015-01-01

    Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature (T R), respiratory rate (R R), and surface temperature (T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature (T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect (P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect (P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect (P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

  15. Adaptation and Validation of the Spanish Version of OSA-18, a Quality of Life Questionnaire for Evaluation of Children with Sleep Apnea-Hypopnea Syndrome.

    PubMed

    Chiner, Eusebi; Landete, Pedro; Sancho-Chust, José Norberto; Martínez-García, Miguel Ángel; Pérez-Ferrer, Patricia; Pastor, Esther; Senent, Cristina; Arlandis, Mar; Navarro, Cristina; Selma, María José

    2016-11-01

    To analyze the reliability and validity of the Spanish version of the OSA-18 quality of life questionnaire in children with apnea-hypopnea syndrome (SAHS). Children with suspected SAHS were studied with polysomnography (PSG) before and after adenotonsillectomy (AA). Age, gender, clinical data, PSG, anthropometric data, and Mallampati and Brodsky scales were analyzed. OSA-18 was administered at baseline and 3-6months post AA. After translation and backtranslation by bilingual professionals, the internal consistency, reliability, construct validity, concurrent validity, predictive validity and sensitivity to change of the questionnaire was assessed. In total, 45 boys and 15 girls were evaluated, showing BMI 18±4, neck 28±5, Brodsky (0: 7%; <25%: 12%; 25-50%: 27%; >50 to <75%: 45%; >75%: 6%), AHI 12±7 pre AA. Global Cronbach alpha was 0.91. Correlations between domains were significant except for emotional aspects, although the total scores correlated with all domains (0.50 to 0.90). The factorial analysis was virtually identical to the original structure. The total scores showed good correlation for concurrent validity (0.2-0.45). With regard to predictive validity, the questionnaire adequately differentiated levels of severity according to Mallampati (ANOVA P=.002) and apnea-hypopnea index (ANOVA P=.006). Test-retest reliability was excellent, as was sensitivity to change, both in the total scores (P<.001) and in each domain (P<.001). The Spanish adaptation of the OSA-18 and its psychometric characteristics suggest that the Spanish version is equivalent to the original and can be used in Spanish-speaking countries. Copyright © 2016 SEPAR. Publicado por Elsevier España, S.L.U. All rights reserved.

  16. Timing considerations on the shear bond strength of orthodontic brackets after topical fluoride varnish applications

    PubMed Central

    Cossellu, Gianguido; Lanteri, Valentina; Butera, Andrea; Laffi, Nicola; Merlini, Alberto; Farronato, Giampietro

    2017-01-01

    Objectives: To assess the best temporal association between the application of a fluoride varnish on enamel and bonding procedures. Materials and Methods: Eighty mandibular bovine incisors were used. Teeth were divided into 4 groups (20 per group); Groups 1–3 were treated with fluoride varnish (Fluor Protector, Ivoclar Vivadent, Schaan, Liechtenstein), and Group 4 served as control with no pretreatment. Tooth were stored in deionized water (37°C) and subjected to thermal cycling for 400 (Group 1), 800 (Group 2), and 2500 (Group 3) cycles corresponding, respectively, to 15, 30, and 90 days in order to simulate the three different timing of bracket bonding. Shear bond strength (SBS) was measured using an Instron Universal Testing machine. Tooth surfaces were examined under a stereomicroscope at 10× magnification to assess the amount of adhesive remnant index (ARI). One-way analysis of variance (ANOVA) and Tukey's honestly significant difference post-hoc test were used for the comparison of SBS values between groups (P < 0.05). The Chi-square test was used to examine differences among ARI scores. (P < 0.05). Results: One-way ANOVA and Tukey post-hoc test showed that the SBS of different groups were significantly different and was impacted by different timing of bonding (P < 0.05). The main differences were between the control group (17.02 ± 6.38 MPa) and Group 1 (6.93 ± 4.3 MPa). The ARI scores showed that there were no significant differences between the four tested groups. Conclusions: The SBS of the brackets bonded 15 days after the application of the fluoride was set back to an optimal value. PMID:28197397

  17. Characterization of a Standardized Ex-vivo Porcine Model to Assess Short Term Intraocular Pressure Changes and Trabecular Meshwork Vitality After Pars Plana Vitrectomy with Different Silicone Oil and BSS Tamponades.

    PubMed

    Ebner, Martina; Mariacher, Siegfried; Hurst, José; Szurman, Peter; Schnichels, Sven; Spitzer, Martin S; Januschowski, Kai

    2017-08-01

    The aim of this study was to characterize a standardized porcine ex-vivo testing system for intraocular pressure (IOP) monitoring after vitrectomy with different endotamponades. Twenty-four pig eyes, six per endotamponade group were obtained immediately postmortem. After pars plana vitrectomy, vitreous substitutes (silicone oil 1000 mPas, 2000 mPas, 5000 mPas, and Balanced Salt Solution (BSS)) were instillated and IOP was observed over 24-hours. Infusion pumps with Dulbecco's Modified Eagle Medium (DMEM) simulated a constant aqueous humor circulation. A histological examination of the trabecular meshwork with DAPI- and TUNEL-staining was performed to detect the amount of apoptotic cells. TUNEL-assay showed a mean cell death rate of 3.78% (SD ± 1.46%) for silicone oil endotamponades compared to 5.05% (SD ± 2.18%) in BSS group. One-way ANOVA (p = 0.425) showed no significant difference between both groups. Mean IOP in silicone oil endotamponades was 9.50 mmHg (SD ± 1.68 mmHg) at baseline, 13.23 mmHg (SD ± 0.79 mmHg) after 1 hour, 18.46 mmHg (SD ± 2.13 mmHg) after 12 hours and 15.51 mmHg (SD ± 2.82 mmHg) 24 hours after instillation. A comparison of all silicone oil groups (one-way ANOVA, Bonferroni post-hoc test, p = 0.269 to 1.000) didn't reveal significant differences in mean IOP. The standardized ex-vivo porcine model represents an effective alternative to the in-vivo testing in animals. Maintaining the trabecular and uveoscleral outflow pathway enables a pseudo in-vivo analysis.

  18. The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment

    NASA Astrophysics Data System (ADS)

    de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

    2015-01-01

    Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature ( T R), respiratory rate ( R R), and surface temperature ( T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature ( T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect ( P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect ( P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect ( P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

  19. Why we should use simpler models if the data allow this: relevance for ANOVA designs in experimental biology.

    PubMed

    Lazic, Stanley E

    2008-07-21

    Analysis of variance (ANOVA) is a common statistical technique in physiological research, and often one or more of the independent/predictor variables such as dose, time, or age, can be treated as a continuous, rather than a categorical variable during analysis - even if subjects were randomly assigned to treatment groups. While this is not common, there are a number of advantages of such an approach, including greater statistical power due to increased precision, a simpler and more informative interpretation of the results, greater parsimony, and transformation of the predictor variable is possible. An example is given from an experiment where rats were randomly assigned to receive either 0, 60, 180, or 240 mg/L of fluoxetine in their drinking water, with performance on the forced swim test as the outcome measure. Dose was treated as either a categorical or continuous variable during analysis, with the latter analysis leading to a more powerful test (p = 0.021 vs. p = 0.159). This will be true in general, and the reasons for this are discussed. There are many advantages to treating variables as continuous numeric variables if the data allow this, and this should be employed more often in experimental biology. Failure to use the optimal analysis runs the risk of missing significant effects or relationships.

  20. Differential Effects of the Catechol-O-Methyltransferase Val158Met Genotype on the Cognitive Function of Schizophrenia Patients and Healthy Japanese Individuals

    PubMed Central

    Tsuchimine, Shoko; Yasui-Furukori, Norio; Kaneda, Ayako; Kaneko, Sunao

    2013-01-01

    Background The functional polymorphism Val158Met in the catechol-O-methyltransferase (COMT) gene has been associated with differences in prefrontal cognitive functions in patients with schizophrenia and healthy individuals. Several studies have indicated that the Met allele is associated with better performance on measures of cognitive function. We investigated whether the COMT Val158Met genotype was associated with cognitive function in 149 healthy controls and 118 patients with schizophrenia. Methods Cognitive function, including verbal memory, working memory, motor speed, attention, executive function and verbal fluency, was assessed by the Brief Assessment of Cognition in Schizophrenia (BACS-J). We employed a one-way analysis of variance (ANOVA) and a multiple regression analysis to determine the associations between the COMT Val158Met genotype and the BACS-J measurements. Results The one-way ANOVA revealed a significant difference in the scores on the Tower of London, a measure of executive function, between the different Val158Met genotypes in the healthy controls (p = 0.023), and a post-hoc analysis showed significant differences between the scores on the Tower of London in the val/val genotype group (18.6 ± 2.4) compared to the other two groups (17.6 ± 2.7 for val/met and 17.1 ± 3.2 for met/met; p = 0.027 and p = 0.024, respectively). Multiple regression analyses revealed that executive function was significantly correlated with the Val158Met genotype (p = 0.003). However, no evidence was found for an effect of the COMT on any cognitive domains of the BACS-J in the patients with schizophrenia. Conclusion These data support the hypothesis that the COMT Val158Met genotype maintains an optimal level of dopamine activity. Further studies should be performed that include a larger sample size and include patients on and off medication, as these patients would help to confirm our findings. PMID:24282499

  1. The antioxidative activity of plant extracts in cooked pork patties as evaluated by descriptive sensory profiling and chemical analysis.

    PubMed

    Nissen, Lise R; Byrne, Derek V; Bertelsen, Grete; Skibsted, Leif H

    2004-11-01

    Antioxidative efficiency of extracts of rosemary, green tea, coffee and grape skin in precooked pork patties was investigated during storage under retail conditions (10 days, 4 °C, atmospheric air), using descriptive sensory profiling following reheating and quantitative measurements of hexanal, thiobarbituric acid reactive substances (TBARS) and vitamin E as indicators of lipid oxidation. The initial oxidative status of pork patties (evaluated by ANOVA) showed a significant lower level of secondary oxidation products and higher levels of vitamin E in patties with extracts incorporated, indicating that the extracts retarded lipid oxidation during processing of the meat. Data analysis for the storage study was based on qualitative overview of sensory/chemical variation by principal component analysis (PCA) and quantitative ANOVA-PLSR for determination of the relationship between design variables (days of chill-storage, extract treatment) versus sensory-chemical variables and PLSR for elucidating the predictive ability of the chemical methods for sensory terms. Lipid oxidation was seen to involve a decrease in perception of meat flavour/odour and a concomitant increase in the off-flavour/odours linseed, rancid. TBARS, hexanal and vitamin E were all significant predictive indices (P<0.05) for the majority of the sensory terms, while vitamin E through negative correlation with TBARS and hexanal displayed its antioxidative effect and thus, its ability to preserve sensory fresh meat flavour/odour. The effect of the various extracts incorporated in the product was clearly related to the degree of lipid oxidation and an overall ranking of the antioxidative efficiency of extracts in declining order became apparent: Rosemary>Grape skin>Tea>Coffee>Reference. Furthermore, the relation between extracts and vitamin E indicated that the extracts, to some extent, interacted with the vitamin and prevented it from degrading. In conclusion, the rosemary extract displayed potential for maintaining sensory eating quality in processed pork products.

  2. Different Citrus rootstocks present high dissimilarities in their antioxidant activity and vitamins content according to the ripening stage.

    PubMed

    Cardeñosa, Vanessa; Barros, Lillian; Barreira, João C M; Arenas, Francisco; Moreno-Rojas, José M; Ferreira, Isabel C F R

    2015-02-01

    "Lane Late" sweet orange grafted on six different citrus rootstocks and grown in the Guadalquivir valley (Seville, Spain) were picked at different ripening stages in two consecutive seasons to characterize their antioxidant activity (free radicals scavenging activity, reducing power and lipid peroxidation inhibition) and quantify their main antioxidant compounds (vitamin E and vitamin C). Linear discriminant analysis and 2-way ANOVA were applied to compare the effects induced by citrus rootstock and ripening stage. The results showed that differences in antioxidant activity and related compounds are mainly dependent on the citrus rootstock, despite ripening stage had also some particular effects. Changes observed in 2012 showed less marked differences among the citrus rootstock. Nevertheless, Cleopatra rootstock showed the highest antioxidant activity in both years, indicating that an increase in its cultivation might be a good solution to sweet orange farmers. Concerning the ripening stage, samples collected in January presented higher vitamin contents, while those collected in April showed higher antioxidant activity. This result allows deciding the harvesting period according to the desired effect. Copyright © 2014 Elsevier GmbH. All rights reserved.

  3. Sparse representation based biomarker selection for schizophrenia with integrated analysis of fMRI and SNPs.

    PubMed

    Cao, Hongbao; Duan, Junbo; Lin, Dongdong; Shugart, Yin Yao; Calhoun, Vince; Wang, Yu-Ping

    2014-11-15

    Integrative analysis of multiple data types can take advantage of their complementary information and therefore may provide higher power to identify potential biomarkers that would be missed using individual data analysis. Due to different natures of diverse data modality, data integration is challenging. Here we address the data integration problem by developing a generalized sparse model (GSM) using weighting factors to integrate multi-modality data for biomarker selection. As an example, we applied the GSM model to a joint analysis of two types of schizophrenia data sets: 759,075 SNPs and 153,594 functional magnetic resonance imaging (fMRI) voxels in 208 subjects (92 cases/116 controls). To solve this small-sample-large-variable problem, we developed a novel sparse representation based variable selection (SRVS) algorithm, with the primary aim to identify biomarkers associated with schizophrenia. To validate the effectiveness of the selected variables, we performed multivariate classification followed by a ten-fold cross validation. We compared our proposed SRVS algorithm with an earlier sparse model based variable selection algorithm for integrated analysis. In addition, we compared with the traditional statistics method for uni-variant data analysis (Chi-squared test for SNP data and ANOVA for fMRI data). Results showed that our proposed SRVS method can identify novel biomarkers that show stronger capability in distinguishing schizophrenia patients from healthy controls. Moreover, better classification ratios were achieved using biomarkers from both types of data, suggesting the importance of integrative analysis. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. INNOVATIVE INSTRUMENTATION AND ANALYSIS OF THE TEMPERATURE MEASUREMENT FOR HIGH TEMPERATURE GASIFICATION

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Seong W. Lee

    During this reporting period, the literature survey including the gasifier temperature measurement literature, the ultrasonic application and its background study in cleaning application, and spray coating process are completed. The gasifier simulator (cold model) testing has been successfully conducted. Four factors (blower voltage, ultrasonic application, injection time intervals, particle weight) were considered as significant factors that affect the temperature measurement. The Analysis of Variance (ANOVA) was applied to analyze the test data. The analysis shows that all four factors are significant to the temperature measurements in the gasifier simulator (cold model). The regression analysis for the case with the normalizedmore » room temperature shows that linear model fits the temperature data with 82% accuracy (18% error). The regression analysis for the case without the normalized room temperature shows 72.5% accuracy (27.5% error). The nonlinear regression analysis indicates a better fit than that of the linear regression. The nonlinear regression model's accuracy is 88.7% (11.3% error) for normalized room temperature case, which is better than the linear regression analysis. The hot model thermocouple sleeve design and fabrication are completed. The gasifier simulator (hot model) design and the fabrication are completed. The system tests of the gasifier simulator (hot model) have been conducted and some modifications have been made. Based on the system tests and results analysis, the gasifier simulator (hot model) has met the proposed design requirement and the ready for system test. The ultrasonic cleaning method is under evaluation and will be further studied for the gasifier simulator (hot model) application. The progress of this project has been on schedule.« less

  5. Tensiomyographical responses to accelerometer loads in female collegiate basketball players.

    PubMed

    Peterson, Kyle D; Quiggle, Gabriela T

    2017-12-01

    The purpose of the present study was to characterise the relationship between relative versus absolute internal and external loads in collegiate basketball players throughout the course of a season. Five Division I basketball players wore triaxial accelerometers throughout the 2015-2016 season and were tensiomyographically assessed weekly. One-way repeated-measure analysis of variance (RM ANOVA) with least-significant-difference (LSD) pairwise comparisons was used to determine which absolute weekly loads were different across the season. Cohen's d was used to supplement the determination of meaningful relative load changes. Overall RM ANOVA models suggest absolute external load differences occurred (PlayerLoad™ F = 17.63; IMA™ F = 31.63). Two-way RM ANOVA models revealed main effect differences were revealed between muscle groups for Tc (F = 9.11) and Dm (F = 3.25). Meaningful relative load changes between weeks were observed for both external and internal. The present study observed that tensiomyography utilised as a tool to monitor internal load may be more suitable for detecting fatigue from relative external load changes versus absolute load attained. Limiting weekly training volume changes to ≤10% may maintain appropriate adaptation. Mediolateral plane IMA™ and adductor longus muscle group may be pertinent metrics when monitoring female collegiate basketball athletes.

  6. Finite element analysis on influence of implant surface treatments, connection and bone types.

    PubMed

    Santiago Junior, Joel Ferreira; Verri, Fellippo Ramos; Almeida, Daniel Augusto de Faria; de Souza Batista, Victor Eduardo; Lemos, Cleidiel Aparecido Araujo; Pellizzer, Eduardo Piza

    2016-06-01

    The aim of this study is to assess the effect of different dental implant designs, bone type, loading, and surface treatment on the stress distribution around the implant by using the 3D finite-element method. Twelve 3D models were developed with Invesalius 3.0, Rhinoceros 4.0, and Solidworks 2010 software. The analysis was processed using the FEMAP 10.2 and NeiNastran 10.0 software. The applied oblique forces were 200 N and 100 N. The results were analyzed using maps of maximum principal stress and bone microstrain. Statistical analysis was performed using ANOVA and Tukey's test. The results showed that the Morse taper design was most efficient in terms of its distribution of stresses (p<0.05); the external hexagon with platform switching did not show a significant difference from an external hexagon with a standard platform (p>0.05). The different bone types did not show a significant difference in the stress/strain distribution (p>0.05). The surface treatment increased areas of stress concentration under axial loading (p<0.05) and increased areas of microstrain under axial and oblique loading (p<0.05) on the cortical bone. The Morse taper design behaved better biomechanically in relation to the bone tissue. The treated surface increased areas of stress and strain on the cortical bone tissue. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Investigation of marital satisfaction and its relationship with job stress and general health of nurses in Qazvin, Iran

    PubMed Central

    Azimian, Jalil; Piran, Pegah; Jahanihashemi, Hassan; Dehghankar, Leila

    2017-01-01

    Background Pressures in nursing can affect family life and marital problems, disrupt common social problems, increase work-family conflicts and endanger people’s general health. Aim To determine marital satisfaction and its relationship with job stress and general health of nurses. Methods This descriptive and cross-sectional study was done in 2015 in medical educational centers of Qazvin by using an ENRICH marital satisfaction scale and General Health and Job Stress questionnaires completed by 123 nurses. Analysis was done by SPSS version 19 using descriptive and analytical statistics (Pearson correlation, t-test, ANOVA, Chi-square, regression line, multiple regression analysis). Results The findings showed that 64.4% of nurses had marital satisfaction. There was significant relationship between age (p=0.03), job experience (p=0.01), age of spouse (p=0.01) and marital satisfaction. The results showed that there was a significant relationship between marital satisfaction and general health (p<0.0001). Multiple regression analysis showed that there was a significant relationship between depression (p=0.012) and anxiety (p=0.001) with marital satisfaction. Conclusions Due to high levels of job stress and disorder in general health of nurses and low marital satisfaction by running health promotion programs and paying attention to its dimensions can help work and family health of nurses. PMID:28607660

  8. Physiological Efficacy of a Lightweight Ambient Air Cooling Unit for Various Applications

    DTIC Science & Technology

    1993-10-01

    Acei 10. Mean skin temperature during continuous work . N*TIS. CRjI DTIC TAB 11. Thermal comfort rate during continuous work. . U nagnounf. 4...perceived exertion (RPE) and thermal comfort (TC) were taken every 10 min. Statistical analysis using a 3-way analysis of variance (ANOVA) was conducted...may account for the fact that no statistically significant differences were seen for thermal comfort and ratings of perceived exertion between the IC

  9. The Relationships between Korean University Students' Reading Attitude, Reading Strategy Use, and Reading Proficiency

    ERIC Educational Resources Information Center

    Kim, Hyangil

    2016-01-01

    This present study investigated the relationships among L2 readers' reading attitude, reading strategy use, and reading proficiency in order to identify patterns caused by individuals' differences. For this study, 153 Korean university students replied to a reading attitude and reading strategy questionnaire. An ANOVA and frequency analysis were…

  10. Interpreting Regression Results: beta Weights and Structure Coefficients are Both Important.

    ERIC Educational Resources Information Center

    Thompson, Bruce

    Various realizations have led to less frequent use of the "OVA" methods (analysis of variance--ANOVA--among others) and to more frequent use of general linear model approaches such as regression. However, too few researchers understand all the various coefficients produced in regression. This paper explains these coefficients and their…

  11. Exploring Preferences of Mentoring Activities among Generational Groups of Registered Nurses in Florida

    ERIC Educational Resources Information Center

    Posey-Goodwin, Patricia Ann

    2013-01-01

    The purpose of this study was to explore differences in perceptions of mentoring activities from four generations of registered nurses in Florida, using the Alleman Mentoring Activities Questionnaire ® (AMAQ ®). Statistical procedures of analysis of variance (ANOVA) were employed to explore differences among 65 registered nurses in Florida from…

  12. The Effect of Flow Frequency on Internet Addiction to Different Internet Usage Activities

    ERIC Educational Resources Information Center

    Yang, Hui-Ling; Wu, Wei-Pang

    2017-01-01

    This study investigated the online flow frequency among college students in regard to different internet activities, and analyzed the effect of flow frequency on internet addiction. This study surveyed 525 undergraduate internet users in Taiwan by using convenience sampling to question participants. In this paper, analysis of variance (ANOVA) was…

  13. The Influence of Ability Grouping on Math Achievement in a Rural Middle School

    ERIC Educational Resources Information Center

    Pritchard, Robert R.

    2012-01-01

    The researcher examined the academic performance of low-tracked students (n = 156) using standardized math test scores to determine whether there is a statistically significant difference in achievement depending on academic environment, tracked or nontracked. An analysis of variance (ANOVA) was calculated, using a paired samples t-test for a…

  14. Stressors and Stressor Response Levels of Hong Kong Primary School Music Teachers

    ERIC Educational Resources Information Center

    Wong, Marina Wai-yee; Chik, Maria Pik-yuk; Chan, Edmund Sze Shing

    2018-01-01

    Responses from 309 randomly sampled Hong Kong primary school music teachers to the shortened version of the Chinese Teacher Stress Questionnaire were subjected to a descriptive percentage analysis, one-way ANOVA and independent t test. Obtained results identify five key stressors: "changing education policy of the government";…

  15. Video Lecture Watching Behaviors of Learners in Online Courses

    ERIC Educational Resources Information Center

    Ozan, Ozlem; Ozarslan, Yasin

    2016-01-01

    This paper examines learners' behaviors while watching online video lectures to understand learner preferences. 2927 students' 18,144 video events across 13 courses on Sakai CLE LMS, which were integrated with Kaltura Video Platform and Google Analytics, were analyzed. For the analysis of the quantitative data, one-way ANOVA, Chi-square test of…

  16. Music Teachers' Computer Anxiety and Self-Efficacy

    ERIC Educational Resources Information Center

    Kiliç, Deniz Beste Çevik

    2015-01-01

    This study aims to examine the computer anxiety and self-efficacy of music teachers in terms of different variables. The research is implemented on 124 music teachers. A personal information form and scales of Computer Anxiety and Self Efficacy are implemented on 124 music teachers. Data are analyzed with one way analysis of variance (ANOVA) and…

  17. Geophysical data integration, stochastic simulation and significance analysis of groundwater responses using ANOVA in the Chicot Aquifer system, Louisiana, USA

    USGS Publications Warehouse

    Rahman, A.; Tsai, F.T.-C.; White, C.D.; Carlson, D.A.; Willson, C.S.

    2008-01-01

    Data integration is challenging where there are different levels of support between primary and secondary data that need to be correlated in various ways. A geostatistical method is described, which integrates the hydraulic conductivity (K) measurements and electrical resistivity data to better estimate the K distribution in the Upper Chicot Aquifer of southwestern Louisiana, USA. The K measurements were obtained from pumping tests and represent the primary (hard) data. Borehole electrical resistivity data from electrical logs were regarded as the secondary (soft) data, and were used to infer K values through Archie's law and the Kozeny-Carman equation. A pseudo cross-semivariogram was developed to cope with the resistivity data non-collocation. Uncertainties in the auto-semivariograms and pseudo cross-semivariogram were quantified. The groundwater flow model responses by the regionalized and coregionalized models of K were compared using analysis of variance (ANOVA). The results indicate that non-collocated secondary data may improve estimates of K and affect groundwater flow responses of practical interest, including specific capacity and drawdown. ?? Springer-Verlag 2007.

  18. Enhancement of docosahexaenoic acid production by Schizochytrium SW1 using response surface methodology

    NASA Astrophysics Data System (ADS)

    Nazir, Mohd Yusuf Mohd; Al-Shorgani, Najeeb Kaid Nasser; Kalil, Mohd Sahaid; Hamid, Aidil Abdul

    2015-09-01

    In this study, three factors (fructose concentration, agitation speed and monosodium glutamate (MSG) concentration) were optimized to enhance DHA production by Schizochytrium SW1 using response surface methodology (RSM). Central composite design was applied as the experimental design and analysis of variance (ANOVA) was used to analyze the data. The experiments were conducted using 500 mL flask with 100 mL working volume at 30°C for 96 hours. ANOVA analysis revealed that the process was adequately represented significantly by the quadratic model (p<0.0001) and two of the factors namely agitation speed and MSG concentration significantly affect DHA production (p<0.005). Level of influence for each variable and quadratic polynomial equation were obtained for DHA production by multiple regression analyses. The estimated optimum conditions for maximizing DHA production by SW1 were 70 g/L fructose, 250 rpm agitation speed and 12 g/L MSG. Consequently, the quadratic model was validated by applying of the estimated optimum conditions, which confirmed the model validity and 52.86% of DHA was produced.

  19. Is there a First Night Effect on Sleep Bruxism? A Sleep Laboratory Study

    PubMed Central

    Hasegawa, Yoko; Lavigne, Gilles; Rompré, Pierre; Kato, Takafumi; Urade, Masahiro; Huynh, Nelly

    2013-01-01

    Study Objectives: Sleep bruxism (SB) is reported to vary in frequency over time. The aim of this study was to assess the first night effect on SB. Methods: A retrospective polysomnographic (PSG) analysis was performed of data from a sample of SB patients (12 females, 4 males; age range: 17-39 years) recorded in a sleep laboratory over 2 consecutive nights. Sleep parameters and jaw muscle activity variables (i.e., rhythmic masticatory muscle activity [RMMA]) for SB were quantified and compared between the 2 nights. Subjects were classified into groups according to severity of RMMA frequency, such as low frequency (2-4 episodes/h and/or < 25 bursts/h) and moderate-high frequency (≥ 4 episodes/h and ≥ 25 bursts/h). Results: Overall, no first night effects were found for most sleep variables. However, total sleep time, sleep efficiency, and stage transitions showed significant time and group interactions (repeated measures ANOVAs, p ≤ 0.05). The RMMA episode index did not differ between the 2 nights, whereas the second night showed significantly higher burst index, bruxism time index, and mean burst duration (repeated measure ANOVAs, p ≤ 0.05). Five patients of 8 in the low frequency group were classified into the moderate-high frequency group on the second night, whereas only one patient in the moderate-high frequency group moved to the low frequency group. Conclusions: The results showed no overall first night effect on severity of RMMA frequency in young and healthy patients with SB. In clinical practice, one-night sleep recording may be sufficient for moderate-high frequency SB patients. However, low RMMA frequency in the first night could be confirmed by a second night based on the patient's medical and dental history. Citation: Hasegawa Y; Lavigne G; Rompré P; Kato T; Urade M; Huynh N. Is there a first night effect on sleep bruxism? A sleep laboratory study. J Clin Sleep Med 2013;9(11):1139-1145. PMID:24235894

  20. Energetics of endurance exercise in young horses determined by nuclear magnetic resonance metabolomics

    PubMed Central

    Luck, Margaux M.; Le Moyec, Laurence; Barrey, Eric; Triba, Mohamed N.; Bouchemal, Nadia; Savarin, Philippe; Robert, Céline

    2015-01-01

    Long-term endurance exercise severely affects metabolism in both human and animal athletes resulting in serious risk of metabolic disorders during or after competition. Young horses (up to 6 years old) can compete in races up to 90 km despite limited scientific knowledge of energetic metabolism responses to long distance exercise in these animals. The hypothesis of this study was that there would be a strong effect of endurance exercise on the metabolomic profiles of young horses and that the energetic metabolism response in young horses would be different from that of more experienced horses. Metabolomic profiling is a powerful method that combines Nuclear Magnetic Resonance (NMR) spectrometry with supervised Orthogonal Projection on Latent Structure (OPLS) statistical analysis. 1H-NMR spectra were obtained from plasma samples drawn from young horses (before and after competition). The spectra obtained before and after the race from the same horse (92 samples) were compared using OPLS. The statistical parameters showed the robustness of the model (R2Y = 0.947, Q2Y = 0.856 and cros-validated ANOVA p < 0.001). For confirmation of the predictive value of the model, a test set of 104 sample spectra were projected by the model, which provided perfect predictions as the area under the receiving-operator curve was 1. The metabolomic profile determined with the OPLS model showed that glycemia after the race was lower than glycemia before the race, despite the involvement of lipid and protein catabolism. An OPLS model was calculated to compare spectra obtained on plasma taken after the race from 6-year-old horses and from experienced horses (cross-validated ANOVA p < 0.001). The comparison of metabolomic profiles in young horses to those from experienced horses showed that experienced horses maintained their glycemia with higher levels of lactate and a decrease of plasma lipids after the race. PMID:26347654

  1. Does Abutment Collar Length Affect Abutment Screw Loosening After Cyclic Loading?

    PubMed

    Siadat, Hakimeh; Pirmoazen, Salma; Beyabanaki, Elaheh; Alikhasi, Marzieh

    2015-07-01

    A significant vertical space that is corrected with vertical ridge augmentation may necessitate selection of longer abutments, which would lead to an increased vertical cantilever. This study investigated the influence of different abutment collar heights on single-unit dental implant screw-loosening after cyclic loading. Fifteen implant-abutment assemblies each consisted of an internal hexagonal implant were randomly assigned to 3 groups: Group1, consisting of 5 abutments with 1.5 mm gingival height (GH); Group2, 5 abutments with 3.5 mm GH; and Group3, 5 abutments with 5.5 mm GH. Each specimen was mounted in transparent auto-polymerizing acrylic resin block, and the abutment screw was tightened to 35 Ncm with an electric torque wrench. After 5 minutes, initial torque loss (ITL) was recorded for all specimens. Metal crowns were fabricated with 45° occlusal surface and were placed on the abutments. A cyclic load of 75 N and frequency of 1 Hz were applied perpendicular to the long axis of each specimen. After 500 000 cycles, secondary torque loss (STL) was recorded. One-way ANOVA analysis was used to evaluate the effects of abutment collar height before and after cyclic loading. One-way ANOVA showed that ITL among the groups was not significantly different (P = .52), while STL was significantly different among the groups (P = .008). Post-hoc Tukey HSD tests showed that STL values were significantly different between the abutments with 1.5 mm GH (Group1) and with 5.5 mm GH (Group3) (P = .007). A paired comparison t-test showed that cyclic loading significantly influenced the STL in comparison with the ITL in each group. Within the limitations of this study, it can be concluded that increase in height of the abutment collar could adversely affect the torque loss of the abutment screw.

  2. A Comparative Analysis of Master Casts Obtained using Different Surface Treatments on Impression Copings for Single Tooth Implant Replacement -An In vitro Study.

    PubMed

    Abrol, Surbhi; Nagpal, Archana; Kaur, Rupandeep; Verma, Ramit; Katna, Vishal; Gupt, Parikshit

    2017-08-01

    Minor rotation of impression coping secured in the impression is an avoidable error that needs to be minimized to ensure precise positioning of implant analog in master cast. The aim of the study was to compare the precision in obtaining master casts by improving the stability of impression copings in the impression with the use of tray adhesive along various surface treatments to increase surface area and by mechanical locking. A total of 60 samples were made (15 samples for each group). A total of 15 samples for Group I were prepared with untreated impression copings, 15 samples for Group II with impression copings treated and modified by application of tray adhesive only. Group III includes 15 samples which were fabricated with impression copings modified by making four vertical grooves on surface of impression coping and coated with adhesive. Group IV had 15 samples which were fabricated with impression copings sandblasted with 50 μm aluminum oxide powder and coated with adhesive. Profile projector was used to evaluate the rotational accuracy of the implant analogs by comparing Molar Implant Angle (MIA) and Premolar Implant Angle (PIA) of test samples with reference model. One-way ANOVA and Student t-test were used to analyze the data. One-way ANOVA didn't show any significant differences for both MIA and PIA between the Groups I, II, III and IV. Student's unpaired t-test revealed no significant difference in the mean MIA and mean PIA. Conclusion: Though results were statistically non-significant, all types of surface treatments of the impression copings showed more accurate transfer than those with no treatment. Sandblasted and adhesive coated impression copings showed minimum amount of rotation followed by those with vertical slots and adhesive coated impression copings.

  3. Torque resistance of impression copings after direct implant impression: An in vitro evaluation of impression materials with and without adhesive.

    PubMed

    Auroy, Pascal; Nicolas, Emanuel; Bedouin, Yvan

    2017-01-01

    No data are available on the ability of an impression coping to resist the manual placement of an abutment replica (implant analog) during prosthodontic laboratory procedures after a direct (pick-up) impression. The purpose of this in vitro study was to evaluate the torque resistance of impression copings after a direct impression, that is, the amount of rotational torque sufficient to induce irreversible displacement of impression copings in the impression material bulk once the impression has been made. A reference model with 5 abutment replicas was constructed. Five impression copings were screwed onto the abutment replicas, and standardized impressions were made. A controlled twisting force was applied to each impression coping. A torque tester recorded the torque variation. Three elastomeric impression materials were tested. ANOVA and the Tukey test (α=.05) were performed using an average of 30 measurements per impression material, with and without adhesive. ANOVA and the Tukey test results showed that the adhesive, cohesive, and mechanical bonds between the impression coping and the impression material depended greatly on the type of material and that the average rupture threshold of these bonds was statistically significantly different in pairwise comparisons (P<.05). The curve analysis showed that when the impression materials are used with adhesives, the deformation of the interface is irreversible beyond 5 Ncm of torque. The polyether impression material is the direct impression material that showed the highest breakdown threshold for adhesive bonding when used without an adhesive. The use of an adhesive on impression copings leads to irreversible deformation of the interface at torque stresses well below the adhesive bond threshold of the same materials used without an adhesive. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  4. ANOVA with Rasch Measures.

    ERIC Educational Resources Information Center

    Linacre, John Michael

    Various methods of estimating main effects from ordinal data are presented and contrasted. Problems discussed include: (1) at what level to accumulate ordinal data into linear measures; (2) how to maintain scaling across analyses; and (3) the inevitable confounding of within cell variance with measurement error. An example shows three methods of…

  5. Optimisation of process parameters on thin shell part using response surface methodology (RSM) and genetic algorithm (GA)

    NASA Astrophysics Data System (ADS)

    Faiz, J. M.; Shayfull, Z.; Nasir, S. M.; Fathullah, M.; Hazwan, M. H. M.

    2017-09-01

    This study conducts the simulation on optimisation of injection moulding process parameters using Autodesk Moldflow Insight (AMI) software. This study has applied some process parameters which are melt temperature, mould temperature, packing pressure, and cooling time in order to analyse the warpage value of the part. Besides, a part has been selected to be studied which made of Polypropylene (PP). The combination of the process parameters is analysed using Analysis of Variance (ANOVA) and the optimised value is obtained using Response Surface Methodology (RSM). The RSM as well as Genetic Algorithm are applied in Design Expert software in order to minimise the warpage value. The outcome of this study shows that the warpage value improved by using RSM and GA.

  6. Association between social capital and health in women of reproductive age: a population-based study.

    PubMed

    Baheiraei, Azam; Bakouei, Fatemeh; Mohammadi, Eesa; Majdzadeh, Reza; Hosseni, Mostafa

    2016-12-01

    Women's health is a public health priority. The origins of health inequalities are very complex. The present study was conducted to determine the association between social capital and health status in reproductive-age women in Tehran, Iran. In this population-based, cross-sectional study, the Social Capital Integrated Questionnaire, the SF-36 and socio-demographic questionnaires were used. Analysis of data by one-way ANOVA test and stepwise multiple linear regression showed that the manifestation dimensions of social capital (groups and networks, trust and solidarity, collective action and cooperation) can potentially lead to the outcome dimensions of social capital (social cohesion and inclusion, and empowerment and political action), which in turn affect health inequities after controlling for socio-demographic differences. © The Author(s) 2015.

  7. Application of the self-generation effect to the learning of Blissymbols by persons presenting with a severe aphasia.

    PubMed

    Rajaram, Priya; Alant, Erna; Dada, Shakila

    2012-06-01

    This study investigated the application of the self-generation effect to enhance the recognition and retention of Blissymbols in persons with severe aphasia. A 2×2×3 factorial design of two treatment types (self-generation and non-generation) was used to teach two sets of Blissymbols. These were administered during 3 training days, between which were withdrawal periods of 1 day and 7 days. Recognition and retention probes were administered at intervals during the training. ANOVA analysis showed that the self-generation treatment produced no immediate recognition advantage; however, better retention of symbol recognition may have occurred over time. Hence, the potential application of the self-generation effect in enhancing the retention of Blissymbols in persons with severe aphasia may warrant further investigation.

  8. Image quality evaluation for smart-phone displays at lighting levels of indoor and outdoor conditions

    NASA Astrophysics Data System (ADS)

    Gong, Rui; Xu, Haisong; Wang, Binyu; Luo, Ming Ronnier

    2012-08-01

    The image quality of two active matrix organic light emitting diode (AMOLED) smart-phone displays and two in-plane switching (IPS) ones was visually assessed at two levels of ambient lighting conditions corresponding to indoor and outdoor applications, respectively. Naturalness, colorfulness, brightness, contrast, sharpness, and overall image quality were evaluated via psychophysical experiment by categorical judgment method using test images selected from different application categories. The experimental results show that the AMOLED displays perform better on colorfulness because of their wide color gamut, while the high pixel resolution and high peak luminance of the IPS panels help the perception of brightness, contrast, and sharpness. Further statistical analysis of ANOVA indicates that ambient lighting levels have significant influences on the attributes of brightness and contrast.

  9. Effects of Visual, Auditory, and Tactile Navigation Cues on Navigation Performance, Situation Awareness, and Mental Workload

    DTIC Science & Technology

    2007-02-01

    Differences (ANOVA post hoc analyses) (Experiment 1) 45 Appendix D. NASA - TLX Subscale Score Mean Differences (ANOVA post hoc analyses) (Experiment 1) 47... NASA - TLX Subscale Score Mean Differences (ANOVA post hoc analyses) (Experiment 2) 55 Distribution List 56 v List of Figures Figure 1...15 Figure 16. Overall NASA - TLX score versus waypoint display modality................................... 16

  10. Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis

    PubMed Central

    Shafiq, Faizan; Sarwar, Zahid; Jilani, Muhammad Munib; Cai, Yingjie

    2018-01-01

    In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L27 orthogonal array was selected for five parameters and three levels by applying Taguchi’s design of experiments. The Taguchi technique was coupled with a grey relational analysis to obtain a grey relational grade for evaluating multiple responses, i.e., crease recovery angle (CRA), tearing strength (TE), and whiteness index (WI). The optimum parameters (values) for resin finishing were the resin concentration (80 g·L−1), the polyethylene softener (40 g·L−1), the catalyst (25 g·L−1), the curing temperature (140 °C), and the curing time (2 min). The goodness-of-fit of the data was validated by an analysis of variance (ANOVA). The optimized sample was characterized by Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscope (SEM) to better understand the structural details of the resin finishing process. The results showed an improved thermal stability and confirmed the presence of well deposited of resin on the optimized fabric surface. PMID:29543724

  11. Tumor Necrosis Factor-induced Decrease of Cochlear Blood Flow Can Be Reversed by Etanercept or JTE-013.

    PubMed

    Sharaf, Kariem; Ihler, Friedrich; Bertlich, Mattis; Reichel, Christoph A; Berghaus, Alexander; Canis, Martin

    2016-08-01

    This study aimed to quantify the effects of tumor necrosis factor (TNF) inhibitor Etanercept and sphingosine-1-phosphate receptor 2 antagonist JTE-013 on cochlear blood flow in guinea pigs after TNF-induced decrease. Sudden sensorineural hearing loss is a common cause for disability and reduced quality of life. Good understanding of the pathophysiology and strong evidence-based therapy concepts are still missing. In various inner ear disorders, inflammation and impairment of cochlear blood flow (CBF) have been considered factors in the pathophysiology. A central mediator of inflammation and microcirculation in the cochlea is TNF. S1P acts downstream in one TNF pathway. Cochlea lateral wall vessels were exposed surgically and assessed by intravital microscopy in guinea pigs in vivo. Twenty-eight animals were randomly distributed into four groups of seven each. Exposed vessels were superfused by TNF (5.0 ng/ml) and afterward repeatedly either by Etanercept (1.0 μg/ml), JTE-013 (10 μmol/L), or vehicle (0.9 % NaCl solution or ethanol: phosphate-buffered saline buffer, respectively). After decreasing CBF with TNF (p <0.001, two-way RM ANOVA), both treatments reversed CBF, compared with vehicle (p <0.001, two-way RM ANOVA). The comparison of the vehicle groups showed no difference (p = 0.969, two-way RM ANOVA), while there was also no difference between the treatment groups (p = 0.850, two-way RM ANOVA). Both Etanercept and JTE-013 reverse the decreasing effect of TNF on cochlear blood flow and, therefore, TNF and the S1P-signalling pathway might be targets for treatment of microcirculation-related hearing loss.

  12. The protective effect of hydrogen sulfide (H2S) on traumatic brain injury (TBI) induced memory deficits in rats.

    PubMed

    Karimi, Seyed Asaad; Hosseinmardi, Narges; Janahmadi, Mahyar; Sayyah, Mohammad; Hajisoltani, Razieh

    2017-09-01

    Traumatic brain injury (TBI), as an expanding public health epidemic, is a common cause of death among youth. TBI is associated with cognitive deficits and memory impairment. Hydrogen sulfide (H 2 S), a novel gaseous mediator, has been recognized as an important neuromodulator and neuroprotective agent in the central nervous system. In the present study the potential neuroprotective role of sodium hydrosulfide (NaHS), an H 2 S donor on TBI induced memory deficit in a rat model of controlled cortical impact (CCI) injury was investigated. CCI model was used to induce TBI. Male rats were randomly assigned into the following groups: control, sham, sham treated with NaHS, TBI, and TBI treated with NaHS (3 and 5mg/kg). NaHS was injected intraperitoneally 5min before TBI induction. Learning and memory were assessed using Morris water maze (MWM) on days 8-12 following injury. CCI resulted in MWM deficits. Injured animals showed a slower rate of acquisition with respect to the sham-operated animals [F (1, 24)=13.97, P<0.01, two-way ANOVA]. NaHS improved spatial memory impairment of injured rats. Treatment with NaHS (5 mg/kg) decreased the escape latency [F (1, 24)=7.559, P<0.05, two-way ANOVA] and traveled distance [F (1, 12)=6.398, P<0.05, Two way ANOVA)]. In probe test, injured animals spent less time in target zone (P<0.05, unpaired t-test) and NaHS did not have any effect on this parameter (p>0.05, one way ANOVA). These findings suggest that NaHS has a neuroprotective effect on TBI-induced memory impairment in rats. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Metabolic Effects of FecB Gene on Follicular Fluid and Ovarian Vein Serum in Sheep (Ovis aries)

    PubMed Central

    Guo, Xiaofei; Wang, Xiangyu; Di, Ran; Liu, Qiuyue; Hu, Wenping; He, Xiaoyun; Yu, Jiarui; Zhang, Xiaosheng; Zhang, Jinlong; Broniowska, Katarzyna; Chen, Wei; Wu, Changxin; Chu, Mingxing

    2018-01-01

    The FecB gene has been discovered as an important gene in sheep for its high relationship with the ovulation rate, but its regulatory mechanism remains unknown. In the present study, liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) techniques were adopted to detect the metabolic effects of FecB gene in follicular fluid (FF) and ovarian vein serum (OVS) in Small Tail Han (STH) sheep. ANOVA and random forest statistical methods were employed for the identification of important metabolic pathways and biomarkers. Changes in amino acid metabolism, redox environment, and energy metabolism were observed in FF from the three FecB genotype STH ewes. Principal component analysis (PCA) and hierarchical clustering analysis (HCA) showed that metabolic effects of FecB gene are more pronounced in FF than in OVS. Therefore, the difference of the metabolic profile in FF is also affected by the FecB genotypes. In Spearman correlation analysis, key metabolites (e.g., glucose 6-phosphate, glucose 1-phosphate, aspartate, asparagine, glutathione oxidized (GSSG), cysteine-glutathione disulfide, γ-glutamylglutamine, and 2-hydrosybutyrate) in ovine FF samples showed a significant correlation with the ovulation rate. Our findings will help to explain the metabolic mechanism of high prolificacy ewes and benefit fertility identification. PMID:29439449

  14. Empirical Testing of an Algorithm for Defining Somatization in Children

    PubMed Central

    Eisman, Howard D.; Fogel, Joshua; Lazarovich, Regina; Pustilnik, Inna

    2007-01-01

    Introduction A previous article proposed an algorithm for defining somatization in children by classifying them into three categories: well, medically ill, and somatizer; the authors suggested further empirical validation of the algorithm (Postilnik et al., 2006). We use the Child Behavior Checklist (CBCL) to provide this empirical validation. Method Parents of children seen in pediatric clinics completed the CBCL (n=126). The physicians of these children completed specially-designed questionnaires. The sample comprised of 62 boys and 64 girls (age range 2 to 15 years). Classification categories included: well (n=53), medically ill (n=55), and somatizer (n=18). Analysis of variance (ANOVA) was used for statistical comparisons. Discriminant function analysis was conducted with the CBCL subscales. Results There were significant differences between the classification categories for the somatic complaints (p=<0.001), social problems (p=0.004), thought problems (p=0.01), attention problems (0.006), and internalizing (p=0.003) subscales and also total (p=0.001), and total-t (p=0.001) scales of the CBCL. Discriminant function analysis showed that 78% of somatizers and 66% of well were accurately classified, while only 35% of medically ill were accurately classified. Conclusion The somatization classification algorithm proposed by Postilnik et al. (2006) shows promise for classification of children and adolescents with somatic symptoms. PMID:18421368

  15. Biplot evaluation of test environments and identification of mega-environment for sugarcane cultivars in China

    PubMed Central

    Luo, Jun; Pan, Yong-Bao; Que, Youxiong; Zhang, Hua; Grisham, Michael Paul; Xu, Liping

    2015-01-01

    Test environments and classification of regional ecological zones into mega environments are the two key components in regional testing of sugarcane cultivars. This study aims to provide the theoretical basis for test environment evaluation and ecological zone division for sugarcane cultivars. In the present study, sugarcane yield data from a three-year nationwide field trial involving 21 cultivars and 14 pilot test locations were analysed using both analysis of variance (ANOVA) and heritability adjusted-genotype main effect plus genotype-environment interaction (HA-GGE) biplot. The results showed that among the interactive factors, the GE interaction had the greatest impact, while the genotype and year interaction showed the lowest impact. Kaiyuan, Lincang and Baoshan of Yunnan, Zhangzhou and Fuzhou of Fujian, and Hechi, Liuzhou and Chongzuo of Guangxi, and Lingao of Hainan were ideal test environments with a demonstrated high efficiency in selecting new cultivars with a wide adaptability, whereas Baise of Guangxi was not. Based on HA-GGE biplot analysis, there are three ecological sugarcane production zones in China, the Southern China Inland Zone, the Southwestern Plateau Zone, and the Southern Coastal Zone. The HA-GGE biplot analysis here presents the ideal test environments and also identifies the mega-environment for sugarcane cultivars in China. PMID:26489689

  16. Biplot evaluation of test environments and identification of mega-environment for sugarcane cultivars in China.

    PubMed

    Luo, Jun; Pan, Yong-Bao; Que, Youxiong; Zhang, Hua; Grisham, Michael Paul; Xu, Liping

    2015-10-22

    Test environments and classification of regional ecological zones into mega environments are the two key components in regional testing of sugarcane cultivars. This study aims to provide the theoretical basis for test environment evaluation and ecological zone division for sugarcane cultivars. In the present study, sugarcane yield data from a three-year nationwide field trial involving 21 cultivars and 14 pilot test locations were analysed using both analysis of variance (ANOVA) and heritability adjusted-genotype main effect plus genotype-environment interaction (HA-GGE) biplot. The results showed that among the interactive factors, the GE interaction had the greatest impact, while the genotype and year interaction showed the lowest impact. Kaiyuan, Lincang and Baoshan of Yunnan, Zhangzhou and Fuzhou of Fujian, and Hechi, Liuzhou and Chongzuo of Guangxi, and Lingao of Hainan were ideal test environments with a demonstrated high efficiency in selecting new cultivars with a wide adaptability, whereas Baise of Guangxi was not. Based on HA-GGE biplot analysis, there are three ecological sugarcane production zones in China, the Southern China Inland Zone, the Southwestern Plateau Zone, and the Southern Coastal Zone. The HA-GGE biplot analysis here presents the ideal test environments and also identifies the mega-environment for sugarcane cultivars in China.

  17. The publication gender gap in US academic surgery.

    PubMed

    Mueller, Claudia; Wright, Robert; Girod, Sabine

    2017-02-14

    Terms such as "glass ceiling" and "sticky floor" are still commonly used to describe women's role in academic surgery. Despite continued efforts to address disparities between men and women in the field, gender inequalities persist. In this investigation we highlight gender differences in published surgical literature by both quantity and impact. Websites for departments of surgery of three academic centers were reviewed to assess the bibliometrics of publications by gender over a two-week period. A one-way ANOVA showed a significantly higher H-index for men than women (p > .05). Further, one-way ANOVA showed significantly more articles published by men than women (p = .019). These differences are most dramatic at the rank of associate professor where the H-index for men is three times that of the women. The rank of full professor showed men had double the number of articles published. These findings align with the previous research that shows a disparity between males and females as they climb the academic ladder. Conducting and publishing research is a vital part of advancement in academic medicine. This study suggests that publication productivity may be a factor that hinders women from advancing within surgery compared to men. Continuing to explore and identify reasons for this gender difference in academic surgery may highlight ways to address the imbalance.

  18. Evaluation of arbekacin anti-MRSA agents for adult in Japan.

    PubMed

    Hamada, Yukihiro; Tamura, Kazuyoshi; Koyama, Ikumi; Seki, Megumi; Yago, Kazuo; Sunakawa, Keisuke; Kuroyama, Masakazu

    2012-08-01

    There are a limited number of reports that compare the clinical efficacy of anti-MRSA agents such as arbekacin (ABK), vancomycin (VCM), teicoplanin (TEIC) and linezolid (LZD). There is a tendency for these four agents to show variation in the inflammatory response parameters, in C-reactive protein (CRP) and in white blood cell count (WBC), depending on the administration period. There was no significant difference among the agents in analysis of variance (ANOVA) in the group of days 1-3 (p = 0.0536) but there was some significant difference in the group of days 4-7, as well as days 8-14 (p < 0.001, p < 0.01) in relative variation rate of CRP. Furthermore, we compared in more detail the groups of LZD, VCM and ABK, with a significant decrease of CRP, each of which showed more decrease in comparison with the group of TEIC in the period days 4-7 (p < 0.01). We took 1-hr serum level after days 3-4, with the ABK treatment as the peak concentration (C(peak)). Having made nonlinear logistic regression analysis of CRP and C(peak)/MIC, we concluded that the decrease rate estimable by early inflammatory effect could be decreased to some 40%, assuming that C(peak)/MIC shows the high value within 4 days after ABK treatment.

  19. A new crank arm based load cell, with built-in conditioning circuit and strain gages, to measure the components of the force applied by a cyclist.

    PubMed

    Pigatto, Andre V; Moura, Karina O A; Favieiro, Gabriela W; Balbinot, Alexandre

    2016-08-01

    This report describes the development of a force platform based on instrumented load cells with built-in conditioning circuit and strain gages to measure and acquire the components of the force that is applied to the bike crank arm during pedaling in real conditions, and save them on a SD Card. To accomplish that, a complete new crank arm 3D solid model was developed in the SolidWorks, with dimensions equivalent to a commercial crank set and compatible with a conventional road bike, but with a compartment to support all the electronics necessary to measure 3 components of the force applied to the pedal during pedaling. After that, a 6082 T6 Aluminum Crankset based on the solid model was made and instrumented with three Wheatstone bridges each. The signals were conditioned on a printed circuit board, made on SMD technology, and acquired using a microcontroller with a DAC. Static deformation analysis showed a linearity error below 0.6% for all six channels. Dynamic analysis showed a natural frequency above 136Hz. A one-factor experiment design was performed with 5 amateur cyclists. ANOVA showed that the cyclist weight causes significant variation on the force applied to the bicycle pedal and its bilateral symmetry.

  20. Diffusion tensor imaging of cingulum bundle and corpus callosum in schizophrenia vs. bipolar disorder.

    PubMed

    Nenadić, Igor; Hoof, Anna; Dietzek, Maren; Langbein, Kerstin; Reichenbach, Jürgen R; Sauer, Heinrich; Güllmar, Daniel

    2017-08-30

    Both schizophrenia and bipolar disorder show abnormalities of white matter, as seen in diffusion tensor imaging (DTI) analyses of major brain fibre bundles. While studies in each of the two conditions have indicated possible overlap in anatomical location, there are few direct comparisons between the disorders. Also, it is unclear whether phenotypically similar subgroups (e.g. patients with bipolar disorder and psychotic features) might share white matter pathologies or be rather similar. Using region-of-interest (ROI) analysis of white matter with diffusion tensor imaging (DTI) at 3 T, we analysed fractional anisotropy (FA), radial diffusivity (RD), and apparent diffusion coefficient (ADC) of the corpus callosum and cingulum bundle in 33 schizophrenia patients, 17 euthymic (previously psychotic) bipolar disorder patients, and 36 healthy controls. ANOVA analysis showed significant main effects of group for RD and ADC (both elevated in schizophrenia). Across the corpus callosum ROIs, there was not group effect on FA, but for RD (elevated in schizophrenia, lower in bipolar disorder) and ADC (higher in schizophrenia, intermediate in bipolar disorder). Our findings show similarities and difference (some gradual) across regions of the two major fibre tracts implicated in these disorders, which would be consistent with a neurobiological overlap of similar clinical phenotypes. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  1. Association between Organizational Commitment and Personality Traits of Faculty Members of Ahvaz Jundishapur University of Medical Sciences.

    PubMed

    Khiavi, Farzad Faraji; Dashti, Rezvan; Mokhtari, Saeedeh

    2016-03-01

    Individual characteristics are important factors influencing organizational commitment. Also, committed human resources can lead organizations to performance improvement as well as personal and organizational achievements. This research aimed to determine the association between organizational commitment and personality traits among faculty members of Ahvaz Jundishapur University of Medical Sciences. the research population of this cross-sectional study was the faculty members of Ahvaz Jundishapur University of Medical Sciences (Ahvaz, Iran). The sample size was determined to be 83. Data collection instruments were the Allen and Meyer questionnaire for organizational commitment and Neo for characteristics' features. The data were analyzed through Pearson's product-moment correlation and the independent samples t-test, ANOVA, and simple linear regression analysis (SLR) by SPSS. Continuance commitment showed a significant positive association with neuroticism, extroversion, agreeableness, and conscientiousness. Normative commitment showed a significant positive association with conscientiousness and a negative association with extroversion (p = 0.001). Openness had a positive association with affective commitment. Openness and agreeableness, among the five characteristics' features, had the most effect on organizational commitment, as indicated by simple linear regression analysis. Faculty members' characteristics showed a significant association with their organizational commitment. Determining appropriate characteristic criteria for faculty members may lead to employing committed personnel to accomplish the University's objectives and tasks.

  2. Statistical inference methods for sparse biological time series data.

    PubMed

    Ndukum, Juliet; Fonseca, Luís L; Santos, Helena; Voit, Eberhard O; Datta, Susmita

    2011-04-25

    Comparing metabolic profiles under different biological perturbations has become a powerful approach to investigating the functioning of cells. The profiles can be taken as single snapshots of a system, but more information is gained if they are measured longitudinally over time. The results are short time series consisting of relatively sparse data that cannot be analyzed effectively with standard time series techniques, such as autocorrelation and frequency domain methods. In this work, we study longitudinal time series profiles of glucose consumption in the yeast Saccharomyces cerevisiae under different temperatures and preconditioning regimens, which we obtained with methods of in vivo nuclear magnetic resonance (NMR) spectroscopy. For the statistical analysis we first fit several nonlinear mixed effect regression models to the longitudinal profiles and then used an ANOVA likelihood ratio method in order to test for significant differences between the profiles. The proposed methods are capable of distinguishing metabolic time trends resulting from different treatments and associate significance levels to these differences. Among several nonlinear mixed-effects regression models tested, a three-parameter logistic function represents the data with highest accuracy. ANOVA and likelihood ratio tests suggest that there are significant differences between the glucose consumption rate profiles for cells that had been--or had not been--preconditioned by heat during growth. Furthermore, pair-wise t-tests reveal significant differences in the longitudinal profiles for glucose consumption rates between optimal conditions and heat stress, optimal and recovery conditions, and heat stress and recovery conditions (p-values <0.0001). We have developed a nonlinear mixed effects model that is appropriate for the analysis of sparse metabolic and physiological time profiles. The model permits sound statistical inference procedures, based on ANOVA likelihood ratio tests, for testing the significance of differences between short time course data under different biological perturbations.

  3. Why care about linear hair growth rates (LHGR)? a study using in vivo imaging and computer assisted image analysis after manual processing (CAIAMP) in unaffected male controls and men with male pattern hair loss (MPHL).

    PubMed

    Van Neste, Dominique

    2014-01-01

    The words "hair growth" frequently encompass many aspects other than just growth. Report on a validation method for precise non-invasive measurement of thickness together with linear hair growth rates of individual hair fibres. To verify the possible correlation between thickness and linear growth rate of scalp hair in male pattern hair loss as compared with healthy male controls. To document the process of validation of hair growth measurement from in vivo image capturing and manual processing, followed by computer assisted image analysis. We analysed 179 paired images obtained with the contrast-enhanced-phototrichogram method with exogen collection (CE-PTG-EC) in 13 healthy male controls and in 87 men with male pattern hair loss (MPHL). There was a global positive correlation between thickness and growth rate (ANOVA; p<0.0001) and a statistically significantly (ANOVA; p<0.0005) slower growth rate in MPHL as compared with equally thick hairs from controls. Finally, the growth rate recorded in the more severe patterns was significantly (ANOVA; P ≤ 0.001) reduced compared with equally thick hair from less severely affected MPHL or controls subjects. Reduced growth rate, together with thinning and shortening of the anagen phase duration in MPHL might contribute together to the global impression of decreased hair volume on the top of the head. Amongst other structural and functional parameters characterizing hair follicle regression, linear hair growth rate warrants further investigation, as it may be relevant in terms of self-perception of hair coverage, quantitative diagnosis and prognostic factor of the therapeutic response.

  4. A novel Hartman Shack-based topography system: repeatability and agreement for corneal power with Scheimpflug+Placido topographer and rotating prism auto-keratorefractor.

    PubMed

    Prakash, Gaurav; Srivastava, Dhruv; Choudhuri, Sounak

    2015-12-01

    The purpose of this study is to analyze the repeatability and agreement of corneal power using a new Hartman type topographer in comparison to Scheimpflug+Placido and autorefractor devices. In this cross sectional, observational study performed at the cornea services of a specialty hospital, 100 normal eyes (100 consecutive candidates) without any previous ocular surgery or morbidity except refractive error were evaluated. All candidates underwent three measurements each on a Full gradient, Hartman type topographer (FG) (iDesign, AMO), Scheimpflug+Placido topographer (SP) (Sirius, CSO) and rotating prism auto-keratorefractor (AR) (KR1, Nidek). The parameters assessed were flat keratometry (K1), steep keratometry (K2), steep axis (K2 axis), mean K, J 0 and J 45. Intra-device repeatability and inter-device agreement were evaluated. On repeatability analysis, the intra-device means were not significantly different (ANOVA, p > 0.05). Intraclass correlations (ICC) were >0.98 except for J 0 and J 45. In terms of intra-measurement standard deviation (Sw), the SP and FG groups fared better than AR group (p < 0.001, ANOVA). On Sw versus Average plots, no significantly predictive fit was seen (p > 0.05, R (2) < 0.1 for all the values). On inter-device agreement analysis, there was no difference in means (ANOVA, p > 0.05). ICC ranged from 0.92 to 0.99 (p < 0.001). Regression fits on Bland-Altman plots suggested no clinically significant effect of average values over difference in means. The repeatability of Hartman type topographer in normal eyes is comparable to SP combination device and better than AR. The agreement between the three devices is good. However, we recommend against interchanging these devices between follow-ups or pooling their data.

  5. Integration of vessel traits, wood density, and height in angiosperm shrubs and trees.

    PubMed

    Martínez-Cabrera, Hugo I; Schenk, H Jochen; Cevallos-Ferriz, Sergio R S; Jones, Cynthia S

    2011-05-01

    Trees and shrubs tend to occupy different niches within and across ecosystems; therefore, traits related to their resource use and life history are expected to differ. Here we analyzed how growth form is related to variation in integration among vessel traits, wood density, and height. We also considered the ecological and evolutionary consequences of such differences. In a sample of 200 woody plant species (65 shrubs and 135 trees) from Argentina, Mexico, and the United States, standardized major axis (SMA) regression, correlation analyses, and ANOVA were used to determine whether relationships among traits differed between growth forms. The influence of phylogenetic relationships was examined with a phylogenetic ANOVA and phylogenetically independent contrasts (PICs). A principal component analysis was conducted to determine whether trees and shrubs occupy different portions of multivariate trait space. Wood density did not differ between shrubs and trees, but there were significant differences in vessel diameter, vessel density, theoretical conductivity, and as expected, height. In addition, relationships between vessel traits and wood density differed between growth forms. Trees showed coordination among vessel traits, wood density, and height, but in shrubs, wood density and vessel traits were independent. These results hold when phylogenetic relationships were considered. In the multivariate analyses, these differences translated as significantly different positions in multivariate trait space occupied by shrubs and trees. Differences in trait integration between growth forms suggest that evolution of growth form in some lineages might be associated with the degree of trait interrelation.

  6. Effect of monomer composition of polymer matrix on flexural properties of glass fibre-reinforced orthodontic archwire.

    PubMed

    Ohtonen, J; Vallittu, P K; Lassila, L V J

    2013-02-01

    To compare force levels obtained from glass fibre-reinforced composite (FRC) archwires. Specifically, FRC wires were compared with polymer matrices having different dimethacrylate monomer compositions. FRC material (E-glass provided by Stick Tech Ltd, Turku, Finland) with continuous unidirectional glass fibres and four different types of dimethacrylate monomer compositions for the resin matrix were tested. Cross-sectionally round FRC archwires fitting into the 0.3 mm slot of a bracket were divided into 16 groups with six specimens in each group. Glass fibres were impregnated by the manufacturer, and they were initially light-cured by hand light-curing unit or additionally post-cured in light-curing oven. The FRC archwire specimens were tested at 37°C according to a three-point bending test in dry and wet conditions using a span length of 10 mm and a crosshead speed of 1.0 mm/minute. The wires were loaded until final failure. The data were statistically analysed using analysis of variance (ANOVA). The dry FRC archwire specimens revealed higher load values than water stored ones, regardless of the polymer matrix. A majority of the FRC archwires showed higher load values after being post-cured. ANOVA revealed that the polymer matrix, curing method, and water storage had a significant effect (P < 0.05) on the flexural behaviour of the FRC archwire. Polymer matrix composition, curing method, and water storage affected the flexural properties and thus, force level and working range which could be obtained from the FRC archwire.

  7. Triamcinolone Acetonide Decreases Outflow Facility in C57BL/6 Mouse Eyes

    PubMed Central

    Kumar, Sandeep; Shah, Shaily; Deutsch, Emily Rose; Tang, Hai Michael; Danias, John

    2013-01-01

    Purpose. To determine the effect of triamcinolone acetonide (TA) on outflow facility in mice. Methods. Animals received 20 μL of TA (40 mg/mL) suspension subconjunctivally either bilaterally or unilaterally and were euthanized after either 1 week or 3 weeks. Before mice were killed, IOP was measured with a rebound tonometer. Outflow facility was determined using simultaneous pressure and flow measurements. Another set of animals received bilateral injection of anecortave acetate (AA) with or without bilateral TA injection and their outflow facility was also determined. Myocilin expression was investigated in a subset of eyes using quantitative PCR (qPCR). Results. Outflow facility of eyes in animals receiving bilateral TA injection (TABL) and TA-treated eyes of animals receiving unilateral injection (TAUL) was significantly decreased compared to naïve control eyes (Cnaive) after 1 week and 3 weeks of TA treatment (ANOVA P < 0.01, P < 0.001, respectively). Eyes treated with AA (with or without TA) had higher outflow facility than animals treated with TA (P < 0.05). IOP data did not show any significant difference between groups. qPCR analysis revealed significant decrease in myocilin expression in eyes receiving AA compared to naïve control and TA-treated eyes (ANOVA P < 0.001). Conclusions. Steroid treatment significantly decreases outflow facility in C57BL/6 mice despite having small effect on IOP. This animal model can be useful for studying the pathogenesis of steroid-induced glaucoma. PMID:23322580

  8. The comparison of manual lymph drainage and ultrasound therapy on the leg swelling caused by wearing high heels.

    PubMed

    Lee, Dong-Yeop; Han, Ji-Su; Jang, Eun-Ji; Seo, Dong-Kwon; Hong, Ji-Heon; Lee, Sang-Sook; Lee, Dong-Geol; Yu Lee, Jae-Ho

    2014-01-01

    One of the major symptoms when women are wearing high heels for a long time is leg swelling. The purpose of this study was to compare the effect of manual lymph drainage with ultrasound therapy. The forty-five healthy women of twenties were participated in this study and divided randomly into three groups; manual lymph drainage group (n=15), ultrasound therapy group (n=15) and control group (n=15). Swelling was measured before wearing the high heels (10 cm-height), after one-hour of wearing the high heels, wearing the high heels of one-hour after the intervention of 15 minutes. Also swelling was calculated by using a tape measure, volumeter and body composition analyzer. Statistical analysis of the comparison between the three groups was performed by one-way ANOVA. Also comparison to the mean value in swelling according to the time was performed by repeated measure ANOVA. As the result of this study, a significant changes have emerged within each of manual lymph drainage, ultrasound therapy and control group (p< 0.05). However, there were no significant differences between each group (p> 0.05). But the mean value of manual lymph drainage group showed the tendency of fast recovering before causing swelling. Therefore, we consider that the clinical treatment of manual lymph drainage and ongoing studies will be made since manual lymph drainage is very effective in releasing the leg swelling caused by wearing high heels and standing for a long time at work.

  9. The impact of environmental and demographic factors on nursing job satisfaction.

    PubMed

    Rahnavard, Farnaz; Sadati, Ahmad Kalateh; Hemmati, Sorror; Ebrahimzade, Najmeh; Sarikhani, Yaser; Heydari, Seyed Taghi; Lankarani, Kamran Bagheri

    2018-04-01

    This study aims to evaluate all aspects of job satisfaction in registered nurses working in different hospitals in Shiraz, Iran. This cross-sectional study was performed during February to August 2015 in Shiraz, Iran. It comprised of 371 registered nurses working in government and private hospitals using multi-stage cluster sampling. Job satisfaction was evaluated using 5 items of the Job Descriptive Index (JDI) consisting of 63 questions developed by Smith, Kendall, and Hulin (1969). Statistical tests including independent sample t test and one-way analysis of variance (ANOVA) were used in order to identify the relation between job satisfaction, and demographic features and work environment. Data were analyzed by SPSS version 15.0, using descriptive statistics, independent-samples t-test, and ANOVA. Our findings showed no relationship between demographic variables and job satisfaction. However, a significant association was observed between environmental aspects such as work rotation (fixed versus rotating) nurse's status (staff vs. supervisors), type of hospitals (governmental vs. private) and work (p<0.01), promotion (p<0.02) and pay (p<0.01) items respectively; however, type of hospital was deemed exempt regarding promotion. Also regarding the number of shifts per week, nurses with more than eight shifts present a lower mean score of satisfaction about pay significantly (p=0.03). The results concerning younger nurses have different types of satisfaction based on several environmental factors. Nurses' policy makers must pay more attention to nurses' satisfaction and focus on reducing the various inequalities.

  10. Severity and prevalence of plaque-induced gingivitis in the Chinese population.

    PubMed

    Zhang, Jincai; Xuan, Dongying; Fan, Weihua; Zhang, Xiong; Dibart, Serge; De Vizio, William; Panagakos, Foti; Zhang, Yun-Po

    2010-10-01

    This study investigated the prevalence and severity of gingivitis and plaque in a representative Chinese population of adults. Using the Loe-Silness gingivitis index (GI) and the modified Quigley-Hein plaque index (PULI), researchers examined 1143 patients from Guangzhou, Shenyang, and Nanjing for the presence of gingivitis and plaque. A two-tailed t-test was used to determine significant differences in the GI and PLI scores between gender and urban/rural areas. The data pertaining to study sites and age groups were compared using the Kruskal-Wallis one-way analysis of variances (ANOVA) by ranks. The correlation between GI/PLI and age was examined using the Pearson correlation coefficient. Age differences among three sites were analyzed with the one-way ANOVA. The age and urban/rural compositions (mean age 42.2 years) paralleled the 2008 China census. The overall average and standard deviation of GI and PLI were 1.101 +/- 0.239 and 3.394 +/- 0.578, respectively. Age significantly correlated with GI and PLI (P < .0001). The PLI in males was significantly higher (P < .0001) than in females; however, no significant difference was noted between GI in males compared to females. Patients in rural areas showed a significantly higher GI and PLI (t = 7.723, P < .0001; t = 7.072, P < .0001) than those in urban ones. Clinical trials evaluating a product's antigingivitis efficacy should recruit participants from a population that represents accurately the intended product users. Variables should include gender, race, age, and geography.

  11. Time trend of butyl- and phenyl-tin contamination in organisms of the Lagoon of Venice (1999-2003).

    PubMed

    Zanon, F; Rado, N; Centanni, E; Zharova, N; Pavoni, B

    2009-05-01

    In the period 1999-2003 a monitoring study on the accumulation of organotin compounds in edible organisms in the Lagoon of Venice was conducted. Butyl and Phenyl derivatives were determined in pooled samples of Mytilus galloprovincialis and Tapes spp. with the aims of assessing organotin contamination in the Lagoon of Venice in the period just preceding their ban in Europe, monitoring the concentrations in organisms with a high commercial use, evaluating a potential hazard for human health due to seafood and identifying the possible contamination sources. Sampling stations (up to 20) were distributed around the Lagoon and particularly concentrated in the area close to the town of Chioggia. Significantly higher (analysis of variance (ANOVA), p < 0.05) tributyltin (TBT) concentrations were found in mussels (from 38 +/- 8 to 6,666 +/- 1,333 microg kg(-1) d.w., as TBT(+)), than in clams (from 6 +/- 1 to 2,256 +/- 451 microg kg(-1) d.w., as TBT(+)). During the 3 years of the survey no increase in average concentrations of the butyltin compounds (tributyltin (TBT) + dibutyltin (DBT) + monobutyltin (MBT)) was observed (ANOVA, p > 0.05) in either species. Furthermore, by analyzing the entire data set, it is evident that most stations show analogous concentrations in the 3 years for both species, whereas few have anomalously higher concentrations. If organotin concentrations in specimens from some sites are compared with the Tolerable Average Residue Level, a possible risk for human health must be considered.

  12. Comparing preseason frontal and sagittal plane plyometric programs on vertical jump height in high-school basketball players.

    PubMed

    King, Jeffrey A; Cipriani, Daniel J

    2010-08-01

    The primary purpose of this study was to evaluate whether frontal plane (FP) plyometrics, which are defined as plyometrics dominated with a lateral component, would produce similar increases in vertical jump height (VJH) compared to sagittal plane (SP) Plyometrics. Thirty-two junior varsity and varsity high-school basketball players participated in 6 weeks of plyometric training. Players participated in either FP or SP plyometrics for the entire study. Vertical jump height was measured on 3 occasions: preintervention (baseline), at week 3 of preparatory training, and at week 6 of training. Descriptive statistics were calculated for VJH. A 2-way analysis of variance (ANOVA) with repeated measures was used to test the difference in mean vertical jump scores using FP and SP training modalities. Results showed a significant effect over time for vertical jump (p < 0.001). Moreover, a significant time by protocol interaction was noted (p < 0.032). A 1-way ANOVA demonstrated that only the SP group demonstrated improvements over time, in VJH, p < 0.05. The FP group did not improve statistically. The data from this study suggest that FP plyometric training did not have a significant effect on VJH and significant improvement in VJH was seen in subjects participating in SP plyometrics thus reinforcing the specificity principle of training. However, coaches should implement both types of plyometrics because both training modalities can improve power and quickness among basketball players.

  13. Effects of Stress and Social Enrichment on Alcohol Intake, Biological and Psychological Stress Responses in Rats

    DTIC Science & Technology

    2010-06-28

    Variance (ANOVA) Table for Serum Corticosterone Table 15 – Repeated-Measures ANOVA Table for Body Weight, Within-Subject Effects Table 16...Serum Ethanol Concentration Table 21 – Repeated-Measures ANOVA Table for Rotarod Performance, Within- Subject Effects Table 22 – Repeated...and that this social environment seems to attenuate the effects of predator and unpredictable stressors on serum corticosterone . In summary, stressed

  14. Optimization of solid content, carbon/nitrogen ratio and food/inoculum ratio for biogas production from food waste.

    PubMed

    Dadaser-Celik, Filiz; Azgin, Sukru Taner; Yildiz, Yalcin Sevki

    2016-12-01

    Biogas production from food waste has been used as an efficient waste treatment option for years. The methane yields from decomposition of waste are, however, highly variable under different operating conditions. In this study, a statistical experimental design method (Taguchi OA 9 ) was implemented to investigate the effects of simultaneous variations of three parameters on methane production. The parameters investigated were solid content (SC), carbon/nitrogen ratio (C/N) and food/inoculum ratio (F/I). Two sets of experiments were conducted with nine anaerobic reactors operating under different conditions. Optimum conditions were determined using statistical analysis, such as analysis of variance (ANOVA). A confirmation experiment was carried out at optimum conditions to investigate the validity of the results. Statistical analysis showed that SC was the most important parameter for methane production with a 45% contribution, followed by F/I ratio with a 35% contribution. The optimum methane yield of 151 l kg -1 volatile solids (VS) was achieved after 24 days of digestion when SC was 4%, C/N was 28 and F/I were 0.3. The confirmation experiment provided a methane yield of 167 l kg -1 VS after 24 days. The analysis showed biogas production from food waste may be increased by optimization of operating conditions. © The Author(s) 2016.

  15. Factors affecting planned return to work after trauma: A prospective descriptive qualitative and quantitative study.

    PubMed

    Folkard, S S; Bloomfield, T D; Page, P R J; Wilson, D; Ricketts, D M; Rogers, B A

    2016-12-01

    The use of patient reported outcome measures (PROMs) in trauma is limited. The aim of this pilot study is to evaluate qualitative responses and factors affecting planned return to work following significant trauma, for which there is currently a poor evidence base. National ethical approval was obtained for routine prospective PROMs data collection, including EQ-5D, between Sept 2013 and March 2015 for trauma patients admitted to the Sussex Major Trauma Centre (n=92). 84 trauma patients disclosed their intended return to work at discharge. Additional open questions asked 'things done well' and 'things to be improved'. EQ-5D responses were valued using the time trade-off method. Statistical analysis between multiple variables was completed by ANOVA, and with categorical categories by Chi squared analysis. Only 18/68 of patients working at admission anticipated returning to work within 14days post-discharge. The injury severity scores (ISS) of those predicting return to work within two weeks and those predicting return to work longer than two weeks were 14.17 and 13.59, respectively. Increased physicality of work showed a trend towards poorer return to work outcomes, although non-significant in Chi-squared test in groups predicting return in less than or greater than two weeks (4.621, p=0.2017ns). No significant difference was demonstrated in the comparative incomes of patients with different estimated return to work outcomes (ANOVA r 2 =0.001, P=0.9590ns). EQ-5D scores were higher in those predicting return to work within two weeks when compared to greater than two weeks. Qualitative thematic content analysis of open responses was possible for 66/92 of respondents. Prominent positive themes were: care, staff, professionalism, and communication. Prominent negative themes were: food, ward response time, and communication. This pilot study highlights the importance of qualitative PROMs analysis in leading patient-driven improvements in trauma care. We provide standard deviations for ISS scores and EQ-5D scores in our general trauma cohort, for use in sample size calculations for further studies analysing factors affecting return to work after trauma. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  16. Finite Element Model Calibration Approach for Area I-X

    NASA Technical Reports Server (NTRS)

    Horta, Lucas G.; Reaves, Mercedes C.; Buehrle, Ralph D.; Templeton, Justin D.; Gaspar, James L.; Lazor, Daniel R.; Parks, Russell A.; Bartolotta, Paul A.

    2010-01-01

    Ares I-X is a pathfinder vehicle concept under development by NASA to demonstrate a new class of launch vehicles. Although this vehicle is essentially a shell of what the Ares I vehicle will be, efforts are underway to model and calibrate the analytical models before its maiden flight. Work reported in this document will summarize the model calibration approach used including uncertainty quantification of vehicle responses and the use of non-conventional boundary conditions during component testing. Since finite element modeling is the primary modeling tool, the calibration process uses these models, often developed by different groups, to assess model deficiencies and to update parameters to reconcile test with predictions. Data for two major component tests and the flight vehicle are presented along with the calibration results. For calibration, sensitivity analysis is conducted using Analysis of Variance (ANOVA). To reduce the computational burden associated with ANOVA calculations, response surface models are used in lieu of computationally intensive finite element solutions. From the sensitivity studies, parameter importance is assessed as a function of frequency. In addition, the work presents an approach to evaluate the probability that a parameter set exists to reconcile test with analysis. Comparisons of pretest predictions of frequency response uncertainty bounds with measured data, results from the variance-based sensitivity analysis, and results from component test models with calibrated boundary stiffness models are all presented.

  17. Finite Element Model Calibration Approach for Ares I-X

    NASA Technical Reports Server (NTRS)

    Horta, Lucas G.; Reaves, Mercedes C.; Buehrle, Ralph D.; Templeton, Justin D.; Lazor, Daniel R.; Gaspar, James L.; Parks, Russel A.; Bartolotta, Paul A.

    2010-01-01

    Ares I-X is a pathfinder vehicle concept under development by NASA to demonstrate a new class of launch vehicles. Although this vehicle is essentially a shell of what the Ares I vehicle will be, efforts are underway to model and calibrate the analytical models before its maiden flight. Work reported in this document will summarize the model calibration approach used including uncertainty quantification of vehicle responses and the use of nonconventional boundary conditions during component testing. Since finite element modeling is the primary modeling tool, the calibration process uses these models, often developed by different groups, to assess model deficiencies and to update parameters to reconcile test with predictions. Data for two major component tests and the flight vehicle are presented along with the calibration results. For calibration, sensitivity analysis is conducted using Analysis of Variance (ANOVA). To reduce the computational burden associated with ANOVA calculations, response surface models are used in lieu of computationally intensive finite element solutions. From the sensitivity studies, parameter importance is assessed as a function of frequency. In addition, the work presents an approach to evaluate the probability that a parameter set exists to reconcile test with analysis. Comparisons of pre-test predictions of frequency response uncertainty bounds with measured data, results from the variance-based sensitivity analysis, and results from component test models with calibrated boundary stiffness models are all presented.

  18. Influence of sex and ethnic tooth-size differences on mixed-dentition space analysis

    PubMed Central

    Altherr, Edward R.; Koroluk, Lorne D.; Phillips, Ceib

    2013-01-01

    Introduction Most mixed-dentition space analyses were developed by using subjects of northwestern European descent and unspecified sex. The purpose of this study was to determine the predictive accuracy of the Tanaka-Johnston analysis in white and black subjects in North Carolina. Methods A total of 120 subjects (30 males and 30 females in each ethnic group) were recruited from clinics at the University of North Carolina School of Dentistry. Ethnicity was verified to 2 previous generations. All subjects were less than 21 years of age and had a full complement of permanent teeth. Digital calipers were used to measure the mesiodistal widths of all teeth on study models fabricated from alginate impressions. The predicted widths of the canines and the premolars in both arches were compared with the actual measured widths. Results In the maxillary arch, there was a significant interaction of ethnicity and sex on the predictive accuracy of the Tanaka-Johnston analysis (P = .03, factorial ANOVA). The predictive accuracy was significantly overestimated in the white female group (P <.001, least square means). In the mandibular arch, there was no significant interaction between ethnicity and sex (P = .49). Conclusions The Tanaka-Johnston analysis significantly overestimated in females (P <.0001) and underestimated in blacks (P <.0001) (factorial ANOVA). Regression equations were developed to increase the predictive accuracy in both arches. (Am J Orthod Dentofacial Orthop 2007;132:332-9) PMID:17826601

  19. Top-down and bottom-up analysis of commercial enoxaparins.

    PubMed

    Liu, Xinyue; St Ange, Kalib; Lin, Lei; Zhang, Fuming; Chi, Lianli; Linhardt, Robert J

    2017-01-13

    A strategy for the comprehensive analysis of low molecular weight (LMW) heparins is described that relies on using an integrated top-down and bottom-up approach. Liquid chromatography-mass spectrometry, an essential component of this approach, is rapid, robust, and amenable to automated processing and interpretation. Nuclear magnetic resonance spectroscopy provides complementary top-down information on the chirality of the uronic acid residues comprising a low molecular weight heparin. Using our integrated approach four different low molecular weight heparins prepared from porcine heparin through chemical β-eliminative cleavage were comprehensively analyzed. Lovenox™ and Clexane™, the innovator versions of enoxaparin marketed in the US and Europe, respectively, and two generic enoxaparins, from Sandoz and Teva, were analyzed. The results which were supported by analysis of variation (ANOVA), while showing remarkable similarities between different versions of the product and good lot-to-lot consistency of each product, also detects subtle differences that may result from differences in their manufacturing processes or differences in the source (or parent) porcine heparin from which each product is prepared. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Organizational variables on nurses' job performance in Turkey: nursing assessments.

    PubMed

    Top, Mehmet

    2013-01-01

    The purpose of this study was to describe the influence of organizational variables on hospital staff nurses' job performance as reported by staff nurses in two cities in Turkey. Hospital ownership status, employment status were examined for their effect on this influence. The reported influence of organizational variables on job performance was measured by a questionnaire developed for this study. Nurses were asked to evaluate the influence of 28 organizational variables on their job performance using a five-point Likert-type scale (1- Never effective, 5- Very effective). The study used comparative and descriptive study design. The staff nurses who were included in this study were 831 hospital staff nurses. Descriptive statistics, frequencies, t-test, ANOVA and factor analysis were used for data analysis. The study showed the relative importance of the 28 organizational variables in influencing nurses' job performance. Nurses in this study reported that workload and technological support are the most influential organizational variables on their job performance. Factor analysis yielded a five-factor model that explained 53.99% of total variance. Administratively controllable influence job organizational variables influence job performance of nurses in different magnitude.

  1. Quantitation of flavonoid constituents in citrus fruits.

    PubMed

    Kawaii, S; Tomono, Y; Katase, E; Ogawa, K; Yano, M

    1999-09-01

    Twenty-four flavonoids have been determined in 66 Citrus species and near-citrus relatives, grown in the same field and year, by means of reversed phase high-performance liquid chromatography analysis. Statistical methods have been applied to find relations among the species. The F ratios of 21 flavonoids obtained by applying ANOVA analysis are significant, indicating that a classification of the species using these variables is reasonable to pursue. Principal component analysis revealed that the distributions of Citrus species belonging to different classes were largely in accordance with Tanaka's classification system.

  2. Perceived Gender Presentation Among Transgender and Gender Diverse Youth: Approaches to Analysis and Associations with Bullying Victimization and Emotional Distress.

    PubMed

    Gower, Amy L; Rider, G Nicole; Coleman, Eli; Brown, Camille; McMorris, Barbara J; Eisenberg, Marla E

    2018-06-19

    As measures of birth-assigned sex, gender identity, and perceived gender presentation are increasingly included in large-scale research studies, data analysis approaches incorporating such measures are needed. Large samples capable of demonstrating variation within the transgender and gender diverse (TGD) community can inform intervention efforts to improve health equity. A population-based sample of TGD youth was used to examine associations between perceived gender presentation, bullying victimization, and emotional distress using two data analysis approaches. Secondary data analysis of the Minnesota Student Survey included 2168 9th and 11th graders who identified as "transgender, genderqueer, genderfluid, or unsure about their gender identity." Youth reported their biological sex, how others perceived their gender presentation, experiences of four forms of bullying victimization, and four measures of emotional distress. Logistic regression and multifactor analysis of variance (ANOVA) were used to compare and contrast two analysis approaches. Logistic regressions indicated that TGD youth perceived as more gender incongruent had higher odds of bullying victimization and emotional distress relative to those perceived as very congruent with their biological sex. Multifactor ANOVAs demonstrated more variable patterns and allowed for comparisons of each perceived presentation group with all other groups, reflecting nuances that exist within TGD youth. Researchers should adopt data analysis strategies that allow for comparisons of all perceived gender presentation categories rather than assigning a reference group. Those working with TGD youth should be particularly attuned to youth perceived as gender incongruent as they may be more likely to experience bullying victimization and emotional distress.

  3. Application of Regression-Discontinuity Analysis in Pharmaceutical Health Services Research

    PubMed Central

    Zuckerman, Ilene H; Lee, Euni; Wutoh, Anthony K; Xue, Zhenyi; Stuart, Bruce

    2006-01-01

    Objective To demonstrate how a relatively underused design, regression-discontinuity (RD), can provide robust estimates of intervention effects when stronger designs are impossible to implement. Data Sources/Study Setting Administrative claims from a Mid-Atlantic state Medicaid program were used to evaluate the effectiveness of an educational drug utilization review intervention. Study Design Quasi-experimental design. Data Collection/Extraction Methods A drug utilization review study was conducted to evaluate a letter intervention to physicians treating Medicaid children with potentially excessive use of short-acting β2-agonist inhalers (SAB). The outcome measure is change in seasonally-adjusted SAB use 5 months pre- and postintervention. To determine if the intervention reduced monthly SAB utilization, results from an RD analysis are compared to findings from a pretest–posttest design using repeated-measure ANOVA. Principal Findings Both analyses indicated that the intervention significantly reduced SAB use among the high users. Average monthly SAB use declined by 0.9 canisters per month (p<.001) according to the repeated-measure ANOVA and by 0.2 canisters per month (p<.001) from RD analysis. Conclusions Regression-discontinuity design is a useful quasi-experimental methodology that has significant advantages in internal validity compared to other pre–post designs when assessing interventions in which subjects' assignment is based on cutoff scores for a critical variable. PMID:16584464

  4. Visuoconstructional Impairment in Subtypes of Mild Cognitive Impairment

    PubMed Central

    Ahmed, Samrah; Brennan, Laura; Eppig, Joel; Price, Catherine C.; Lamar, Melissa; Delano-Wood, Lisa; Bangen, Katherine J.; Edmonds, Emily C.; Clark, Lindsey; Nation, Daniel A.; Jak, Amy; Au, Rhoda; Swenson, Rodney; Bondi, Mark W.; Libon, David J.

    2018-01-01

    Clock Drawing Test performance was examined alongside other neuropsychological tests in mild cognitive impairment (MCI). We tested the hypothesis that clock-drawing errors are related to executive impairment. The current research examined 86 patients with MCI for whom, in prior research, cluster analysis was used to sort patients into dysexecutive (dMCI, n=22), amnestic (aMCI, n=13), and multi-domain (mMCI, n=51) subtypes. First, principal components analysis (PCA) and linear regression examined relations between clock-drawing errors and neuropsychological test performance independent of MCI subtype. Second, between-group differences were assessed with analysis of variance (ANOVA) where MCI subgroups were compared to normal controls (NC). PCA yielded a 3-group solution. Contrary to expectations, clock-drawing errors loaded with lower performance on naming/lexical retrieval, rather than with executive tests. Regression analyses found increasing clock-drawing errors to command were associated with worse performance only on naming/lexical retrieval tests. ANOVAs revealed no differences in clock-drawing errors between dMCI versus mMCI or aMCI versus NCs. Both the dMCI and mMCI groups generated more clock-drawing errors than the aMCI and NC groups in the command condition. In MCI, language-related skills contribute to clock-drawing impairment. PMID:26397732

  5. New Method for Insomnia Mongolian Mind-Body Interactive Psychotherapy in the Assessment of Chronic Insomnia: A Retrospective Study.

    PubMed

    He, Nagongbilige; Lan, Wu; Jiang, Aruna; Jia, Haserden; Bao, Shuzhi; Bao, Longmei; Qin, Altansha; Bao, Orgel; Bao, Shinjiltu; Wang, Nandin; Bao, Suyaltu; Dai, Shuangfu; Bao, Sarula; Arlud, Sarnai

    2018-06-19

    Insomnia is a common clinical complaint, and if not addressed it can increase the risk of developing other underlying diseases such as hypertension, depression and anxiety. The use of Mongolian mind-body interactive therapy as a comprehensive psychotherapeutic approach in chronic insomnia has been shown in this retrospective study. Subjects who had suffered insomnia for more than 1 month participated in the Mongolian mind-body interactive psychotherapy program between June 2012 and February 2014. They were interviewed by telephone at least 10 months before participating in the program. Their sleep was assessed using the Athens insomnia scale. Descriptive statistics, ANOVA and regression analysis were used for data analysis by SPSS software. Mongolian mind-body interactive psychotherapy significantly improved sleeping conditions. In ANOVA analysis, both short- and long-term outcomes were significantly affected by the treatment period. Patients who previously took medication and pre-treatment sleeping condition (ASI score) had a significant influence on long-term outcomes, as well as treatment time related to the duration of insomnia. Mongolian mind-body interactive psychotherapy is a new method for insomnia, and narrative therapy and hypnotic methods together improve the sleeping condition, However, a further controlled randomized clinical study is needed to understand the efficacy.

  6. Analysis and classification of optical tomographic images of rheumatoid fingers with ANOVA and discriminate analysis

    NASA Astrophysics Data System (ADS)

    Montejo, Ludguier D.; Kim, Hyun K.; Häme, Yrjö; Jia, Jingfei; Montejo, Julio D.; Netz, Uwe J.; Blaschke, Sabine; Zwaka, Paul; Müeller, Gerhard A.; Beuthan, Jürgen; Hielscher, Andreas H.

    2011-03-01

    We present a study on the effectiveness of computer-aided diagnosis (CAD) of rheumatoid arthritis (RA) from frequency-domain diffuse optical tomographic (FDOT) images. FDOT is used to obtain the distribution of tissue optical properties. Subsequently, the non-parametric Kruskal-Wallis ANOVA test is employed to verify statistically significant differences between the optical parameters of patients affected by RA and healthy volunteers. Furthermore, quadratic discriminate analysis (QDA) of the absorption (μa) and scattering (μa or μ's) distributions is used to classify subjects as affected or not affected by RA. We evaluate the classification efficiency by determining the sensitivity (Se), specificity (Sp), and the Youden index (Y). We find that combining features extracted from μa and μa or μ's images allows for more accurate classification than when μa or μa or μ's features are considered individually on their own. Combining μa and μa or μ's features yields values of up to Y = 0.75 (Se = 0.84 and Sp = 0.91). The best results when μa or μ's features are considered individually are Y = 0.65 (Se = 0.85 and Sp = 0.80) and Y = 0.70 (Se = 0.80 and Sp = 0.90), respectively.

  7. The Effect of maceration period on contents and color brightness of phycoerythrin from Gracilaria sp.

    NASA Astrophysics Data System (ADS)

    Lidiana, H.; Sulmartiwi, L.; Andriyono, S.

    2018-04-01

    Natural pigment from seaweed, is currently required by humans as one of active compounds that are usefull in the field of health, cosmetics and food. One of the pigments which potentially can be developed is red phycobilin pigment. The pigment can be obtained from Gracilaria sp. throught maceration method. This research aims to find out wheter there is influence from the long maceration time toward to the content and the phycoerytrin color brightness of Gracilaria sp. The reseach method used experimental experiment with complete randomized design (CRD) which was consisted of nine treatments of long time maceration period three replications. Data analysis was used the Analysis of Variance (ANOVA) and continued to Duncan’s Multiple Distance Test to. The result showed that treatments with the time of maceration for 30 hours was the best treatment on phycoerytrin content about 0.98 mg/g with the brightness value was 19.73 L*, reddish value was 7.23 a*, and yellowish value was 2.87 b* of Gracilaria sp.

  8. Influence of Temperature and Chloride Concentration on Passivation Mechanism and Corrosion of a DSS2209 Welded Joint

    NASA Astrophysics Data System (ADS)

    Hachemi, Hania; Azzaz, Mohamed; Djeghlal, Mohamed Elamine

    2016-10-01

    The passivity behavior of a 2209 duplex stainless steel welded joint was investigated using potentiodynamic polarization, Mott-Schottky analysis and EIS measurements. In order to evaluate the contribution of temperature, chloride concentration and microstructure, a sequence of polarization tests were carried out in aerated NaCl solutions selected according to robust design of a three level-three factors Taguchi L9 orthogonal array. Analysis of signal-to-noise ratio and ANOVA were achieved on all measured data, and the contribution of every control factor was estimated. The results showed that the corrosion resistance of 2209 duplex stainless steel welded joint is related to the evolution of the passive film formed on the surface. It was found that the passive film on the welded zone possessed n- and p-type semiconductor characteristics. With the increase of solution temperature and chlorides concentration, the corrosion resistance of the passive film is more affected in the weldment than in the base metal.

  9. Comparison of current Shuttle and pre-Challenger flight suit reach capability during launch accelerations

    NASA Technical Reports Server (NTRS)

    Bagian, James P.; Schafer, Lauren E.

    1992-01-01

    The Challenger accident prompted the creation of a crew escape system which replaced the former Launch Entry Helmet (LEH) ensemble with the current Launch Entry Suit (LES). However, questions were raised regarding the impact of this change on crew reach capability. This study addressed the question of reach capability and its effects on realistic ground-based training for Space Shuttle missions. Eleven subjects performed reach sweeps in both the LEH and LES suits during 1 and 3 Gx acceleration trials in the Brooks AFB centrifuge. These reach sweeps were recorded on videotape and subsequently analyzed using a 3D motion analysis system. The ANOVA procedure of the Statistical Analysis System program was used to evaluate differences in forward and overhead reach. The results showed that the LES provided less reach capability than its predecessor, the LEH. This study also demonstrated that, since there was no substantial difference between 1 and 3 Gx reach sweeps in the LES, realistic Shuttle launch training may be accomplished in ground based simulators.

  10. Effect of age, gender and body mass index on visual and auditory reaction times in Indian population.

    PubMed

    Nikam, Lalita H; Gadkari, Jayshree V

    2012-01-01

    The effect of Age. Gender and Body Mass Index (BMI) on the Visual (VRT) and Auditory reaction time (ART) was studied in 30 males and 30 females in the age group of 18-20 years along with 30 males and 30 females in the age group of 65-75 years. Statistical analysis of the data by one-way ANOVA and post-hoc by Tukey-HSD test showed that BMI, VRT and ART were significantly higher in old than young individuals. Females had higher BMI and longer reaction times than males. There was significant positive correlation between BMI and reaction times (VRT and ART) in both males and females by Pearson correlation analysis. Older individuals should be more careful and vigilant about the injuries and falls due to increased reaction time. Longer reaction times and higher BMI in females could be attributed to fluid and salt retention due to female sex hormones affecting sensorimotor co-ordination.

  11. Data on xylem sap proteins from Mn- and Fe-deficient tomato plants obtained using shotgun proteomics.

    PubMed

    Ceballos-Laita, Laura; Gutierrez-Carbonell, Elain; Takahashi, Daisuke; Abadía, Anunciación; Uemura, Matsuo; Abadía, Javier; López-Millán, Ana Flor

    2018-04-01

    This article contains consolidated proteomic data obtained from xylem sap collected from tomato plants grown in Fe- and Mn-sufficient control, as well as Fe-deficient and Mn-deficient conditions. Data presented here cover proteins identified and quantified by shotgun proteomics and Progenesis LC-MS analyses: proteins identified with at least two peptides and showing changes statistically significant (ANOVA; p ≤ 0.05) and above a biologically relevant selected threshold (fold ≥ 2) between treatments are listed. The comparison between Fe-deficient, Mn-deficient and control xylem sap samples using a multivariate statistical data analysis (Principal Component Analysis, PCA) is also included. Data included in this article are discussed in depth in the research article entitled "Effects of Fe and Mn deficiencies on the protein profiles of tomato ( Solanum lycopersicum) xylem sap as revealed by shotgun analyses" [1]. This dataset is made available to support the cited study as well to extend analyses at a later stage.

  12. Modeling and analysis of film composition on mechanical properties of maize starch based edible films.

    PubMed

    Prakash Maran, J; Sivakumar, V; Thirugnanasambandham, K; Kandasamy, S

    2013-11-01

    The present study investigates the influence of composition (content of maize starch (1-3 g), sorbitol (0.5-1.0 ml), agar (0.5-1.0 g) and tween-80 (0.1-0.5 ml)) on the mechanical properties (tensile strength, elongation, Young's modulus, puncture force and puncture deformation) of the maize starch based edible films using four factors with three level Box-Behnken design. The edible films were obtained by casting method. The results showed that, tween-80 increases the permeation of sorbitol in to the polymer matrix. Increasing concentration of sorbitol (hydrophilic nature and plasticizing effect of sorbitol) decreases the tensile strength, Young's modulus and puncture force of the films. The results were analyzed by Pareto analysis of variance (ANOVA) and second order polynomial models were obtained for all responses with high R(2) values (R(2)>0.95). 3D response surface plots were constructed to study the relationship between process variables and the responses. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Computation and evaluation of features of surface electromyogram to identify the force of muscle contraction and muscle fatigue.

    PubMed

    Arjunan, Sridhar P; Kumar, Dinesh K; Naik, Ganesh

    2014-01-01

    The relationship between force of muscle contraction and muscle fatigue with six different features of surface electromyogram (sEMG) was determined by conducting experiments on thirty-five volunteers. The participants performed isometric contractions at 50%, 75%, and 100% of their maximum voluntary contraction (MVC). Six features were considered in this study: normalised spectral index (NSM5), median frequency, root mean square, waveform length, normalised root mean square (NRMS), and increase in synchronization (IIS) index. Analysis of variance (ANOVA) and linear regression analysis were performed to determine the significance of the feature with respect to the three factors: muscle force, muscle fatigue, and subject. The results show that IIS index of sEMG had the highest correlation with muscle fatigue and the relationship was statistically significant (P < 0.01), while NSM5 associated best with level of muscle contraction (%MVC) (P < 0.01). Both of these features were not affected by the intersubject variations (P > 0.05).

  14. Computation and Evaluation of Features of Surface Electromyogram to Identify the Force of Muscle Contraction and Muscle Fatigue

    PubMed Central

    Arjunan, Sridhar P.; Kumar, Dinesh K.; Naik, Ganesh

    2014-01-01

    The relationship between force of muscle contraction and muscle fatigue with six different features of surface electromyogram (sEMG) was determined by conducting experiments on thirty-five volunteers. The participants performed isometric contractions at 50%, 75%, and 100% of their maximum voluntary contraction (MVC). Six features were considered in this study: normalised spectral index (NSM5), median frequency, root mean square, waveform length, normalised root mean square (NRMS), and increase in synchronization (IIS) index. Analysis of variance (ANOVA) and linear regression analysis were performed to determine the significance of the feature with respect to the three factors: muscle force, muscle fatigue, and subject. The results show that IIS index of sEMG had the highest correlation with muscle fatigue and the relationship was statistically significant (P < 0.01), while NSM5 associated best with level of muscle contraction (%MVC) (P < 0.01). Both of these features were not affected by the intersubject variations (P > 0.05). PMID:24995275

  15. Estimating linear effects in ANOVA designs: the easy way.

    PubMed

    Pinhas, Michal; Tzelgov, Joseph; Ganor-Stern, Dana

    2012-09-01

    Research in cognitive science has documented numerous phenomena that are approximated by linear relationships. In the domain of numerical cognition, the use of linear regression for estimating linear effects (e.g., distance and SNARC effects) became common following Fias, Brysbaert, Geypens, and d'Ydewalle's (1996) study on the SNARC effect. While their work has become the model for analyzing linear effects in the field, it requires statistical analysis of individual participants and does not provide measures of the proportions of variability accounted for (cf. Lorch & Myers, 1990). In the present methodological note, using both the distance and SNARC effects as examples, we demonstrate how linear effects can be estimated in a simple way within the framework of repeated measures analysis of variance. This method allows for estimating effect sizes in terms of both slope and proportions of variability accounted for. Finally, we show that our method can easily be extended to estimate linear interaction effects, not just linear effects calculated as main effects.

  16. Genome-wide transcriptome study in wheat identified candidate genes related to processing quality, majority of them showing interaction (quality x development) and having temporal and spatial distributions.

    PubMed

    Singh, Anuradha; Mantri, Shrikant; Sharma, Monica; Chaudhury, Ashok; Tuli, Rakesh; Roy, Joy

    2014-01-16

    The cultivated bread wheat (Triticum aestivum L.) possesses unique flour quality, which can be processed into many end-use food products such as bread, pasta, chapatti (unleavened flat bread), biscuit, etc. The present wheat varieties require improvement in processing quality to meet the increasing demand of better quality food products. However, processing quality is very complex and controlled by many genes, which have not been completely explored. To identify the candidate genes whose expressions changed due to variation in processing quality and interaction (quality x development), genome-wide transcriptome studies were performed in two sets of diverse Indian wheat varieties differing for chapatti quality. It is also important to understand the temporal and spatial distributions of their expressions for designing tissue and growth specific functional genomics experiments. Gene-specific two-way ANOVA analysis of expression of about 55 K transcripts in two diverse sets of Indian wheat varieties for chapatti quality at three seed developmental stages identified 236 differentially expressed probe sets (10-fold). Out of 236, 110 probe sets were identified for chapatti quality. Many processing quality related key genes such as glutenin and gliadins, puroindolines, grain softness protein, alpha and beta amylases, proteases, were identified, and many other candidate genes related to cellular and molecular functions were also identified. The ANOVA analysis revealed that the expression of 56 of 110 probe sets was involved in interaction (quality x development). Majority of the probe sets showed differential expression at early stage of seed development i.e. temporal expression. Meta-analysis revealed that the majority of the genes expressed in one or a few growth stages indicating spatial distribution of their expressions. The differential expressions of a few candidate genes such as pre-alpha/beta-gliadin and gamma gliadin were validated by RT-PCR. Therefore, this study identified several quality related key genes including many other genes, their interactions (quality x development) and temporal and spatial distributions. The candidate genes identified for processing quality and information on temporal and spatial distributions of their expressions would be useful for designing wheat improvement programs for processing quality either by changing their expression or development of single nucleotide polymorphisms (SNPs) markers.

  17. Genome-wide transcriptome study in wheat identified candidate genes related to processing quality, majority of them showing interaction (quality x development) and having temporal and spatial distributions

    PubMed Central

    2014-01-01

    Background The cultivated bread wheat (Triticum aestivum L.) possesses unique flour quality, which can be processed into many end-use food products such as bread, pasta, chapatti (unleavened flat bread), biscuit, etc. The present wheat varieties require improvement in processing quality to meet the increasing demand of better quality food products. However, processing quality is very complex and controlled by many genes, which have not been completely explored. To identify the candidate genes whose expressions changed due to variation in processing quality and interaction (quality x development), genome-wide transcriptome studies were performed in two sets of diverse Indian wheat varieties differing for chapatti quality. It is also important to understand the temporal and spatial distributions of their expressions for designing tissue and growth specific functional genomics experiments. Results Gene-specific two-way ANOVA analysis of expression of about 55 K transcripts in two diverse sets of Indian wheat varieties for chapatti quality at three seed developmental stages identified 236 differentially expressed probe sets (10-fold). Out of 236, 110 probe sets were identified for chapatti quality. Many processing quality related key genes such as glutenin and gliadins, puroindolines, grain softness protein, alpha and beta amylases, proteases, were identified, and many other candidate genes related to cellular and molecular functions were also identified. The ANOVA analysis revealed that the expression of 56 of 110 probe sets was involved in interaction (quality x development). Majority of the probe sets showed differential expression at early stage of seed development i.e. temporal expression. Meta-analysis revealed that the majority of the genes expressed in one or a few growth stages indicating spatial distribution of their expressions. The differential expressions of a few candidate genes such as pre-alpha/beta-gliadin and gamma gliadin were validated by RT-PCR. Therefore, this study identified several quality related key genes including many other genes, their interactions (quality x development) and temporal and spatial distributions. Conclusions The candidate genes identified for processing quality and information on temporal and spatial distributions of their expressions would be useful for designing wheat improvement programs for processing quality either by changing their expression or development of single nucleotide polymorphisms (SNPs) markers. PMID:24433256

  18. Estimation of the KR20 Reliability Coefficient When Data Are Incomplete.

    ERIC Educational Resources Information Center

    Huynh, Huynh

    Three techniques for estimating Kuder Richardson reliability (KR20) coefficients for incomplete data are contrasted. The methods are: (1) Henderson's Method 1 (analysis of variance, or ANOVA); (2) Henderson's Method 3 (FITCO); and (3) Koch's method of symmetric sums (SYSUM). A Monte Carlo simulation was used to assess the precision of the three…

  19. The Effect of a State Department of Education Teacher Mentor Initiative on Science Achievement

    ERIC Educational Resources Information Center

    Pruitt, Stephen L.

    2010-01-01

    This study analyzed a state department of education's ability to have actual influence over the improvement of science achievement and proficiency by having direct relationships with science teachers in Georgia's lowest performing schools. The study employed a mixed ANOVA analysis of the mean scale scores and proficiency rates of the science…

  20. The Impact of Advanced Placement Courses on High School Students Taking the Scholastic Aptitude Test.

    ERIC Educational Resources Information Center

    Thomas, L. M.; Thomas, Suzanne G.

    This obtrusive post-hoc quasi-experimental study investigated Scholastic Assessment Test (SAT) scores of 111 high school students in grades 10 through 12. Fifty-three students were enrolled in at least one Advanced Placement (AP) course at the time of the study. General factorial analysis of variance (ANOVA) tested for significant differences…

  1. Analysis of Turkish Prospective Science Teachers' Perceptions on Technology in Education

    ERIC Educational Resources Information Center

    Koksal, Mustafa Serdar; Yaman, Suleyman; Saka, Yavuz

    2016-01-01

    Purpose of this study was to determine and analyze Turkish pre-service science teachers' perceptions on technology in terms of learning style, computer competency level, possession of a computer, and gender. The study involved 264 Turkish pre-service science teachers. Analyses were conducted through four-way ANOVA, t-tests, Mann Whitney U test and…

  2. What Is Wrong with ANOVA and Multiple Regression? Analyzing Sentence Reading Times with Hierarchical Linear Models

    ERIC Educational Resources Information Center

    Richter, Tobias

    2006-01-01

    Most reading time studies using naturalistic texts yield data sets characterized by a multilevel structure: Sentences (sentence level) are nested within persons (person level). In contrast to analysis of variance and multiple regression techniques, hierarchical linear models take the multilevel structure of reading time data into account. They…

  3. Financial Aid Tipping Points: An Analysis of Aid and Academic Achievement at a California Community College

    ERIC Educational Resources Information Center

    Coria, Elizabeth; Hoffman, John L.

    2016-01-01

    The purpose of this study was to explore relationships between financial aid awards and measures of student academic achievement. Financial aid and academic records for 11,956 students attending an urban California community college were examined and analyzed using simultaneous linear regression and two-way factorial ANOVAs. Findings revealed a…

  4. Leadership Styles and School Performance: Is There a Gender Difference in Expectations for Teachers?

    ERIC Educational Resources Information Center

    Magee, Iris Denise

    2012-01-01

    In this paper, the research on the perceptions of gender differences in leadership styles is explored. The study also attempts to determine whether there are differences in overall school performance for male versus female school principals. The methodology involved a mixed-model ANOVA analysis of findings from 31 principals and 236 teachers…

  5. Regional trade market analysis: resort marketing approaches

    Treesearch

    David C. Bojanic; Rodney B. Warnick

    1995-01-01

    This paper examines the value of geographic segmentation for a regional ski resort in New England. Customers from different user groups were surveyed along with a list of inquiries and a purchased list, and grouped according to their area of origin. An ANOVA was performed to determine if there were differences in attitudes and trip behaviors between the segments. It...

  6. Chronotype influences activity circadian rhythm and sleep: differences in sleep quality between weekdays and weekend.

    PubMed

    Vitale, Jacopo A; Roveda, Eliana; Montaruli, Angela; Galasso, Letizia; Weydahl, Andi; Caumo, Andrea; Carandente, Franca

    2015-04-01

    Several studies have shown the differences among chronotypes in the circadian rhythm of different physiological variables. Individuals show variation in their preference for the daily timing of activity; additionally, there is an association between chronotype and sleep duration/sleep complaints. Few studies have investigated sleep quality during the week days and weekends in relation to the circadian typology using self-assessment questionnaires or actigraphy. The purpose of this study was to use actigraphy to assess the relationship between the three chronotypes and the circadian rhythm of activity levels and to determine whether sleep parameters respond differently with respect to time (weekdays versus the weekend) in Morning-types (M-types), Neither-types (N-types) and Evening-types (E-types). The morningness-eveningness questionnaire (MEQ) was administered to 502 college students to determine their chronotypes. Fifty subjects (16 M-types, 15 N-types and 19 E-types) were recruited to undergo a 7-days monitoring period with an actigraph (Actiwacth® actometers, CNT, Cambridge, UK) to evaluate their sleep parameters and the circadian rhythm of their activity levels. To compare the amplitude and the acrophase among the three chronotypes, we used a one-way ANOVA followed by the Tukey-Kramer post-hoc test. To compare the Midline Estimating Statistic of Rhythm (MESOR) among the three chronotypes, we used a Kruskal-Wallis non-parametric test followed by pairwise comparisons that were performed using Dunn's procedure with a Bonferroni correction for multiple comparisons. The analysis of each sleep parameter was conducted using the mixed ANOVA procedure. The results showed that the chronotype was influenced by sex (χ(2) with p = 0.011) and the photoperiod at birth (χ(2) with p < 0.05). Though the MESOR and amplitude of the activity levels were not different among the three chronotypes, the acrophases compared by the ANOVA post-hoc test were significantly different (p < 0.001). The ANOVA post-hoc test revealed the presence of a significant difference (p < 0.001) between the M-types (14:32 h) and E-types (16:53 h). There was also a significant interaction between the chronotype and four sleep parameters: Sleep end, Assumed Sleep, Immobility Time and Sleep Efficiency. Sleep Efficiency showed the same patterns as did Assumed Sleep and Immobility Time: the Sleep Efficiency of the E-types was poorer than that of the M- and N-types during weekdays (77.9% ± 7.0 versus 84.1% ± 4.9 and 84.1% ± 5.2) but was similar to that measured in the M- and N-types during the weekend. Sleep Latency and Movement and Fragmentation Index were not different among the three chronotypes and did not change on the weekend compared with weekdays. This study highlights two key findings: first, we observed that the circadian rhythm of activity levels was influenced by the chronotype; second, the chronotype had a significant effect on sleep parameters: the E-types had a reduced sleep quality and quantity compared with the M- and N-types during weekdays, whereas the E-types reached the same levels as the other chronotypes during the weekends. These findings suggest that E-types accumulate a sleep deficit during weekdays due to social and academic commitments and that they recover from this deficit during "free days" on the weekend.

  7. Effects of a High Magnetic Field on the Microstructure of Ni-Based Single-Crystal Superalloys During Directional Solidification

    NASA Astrophysics Data System (ADS)

    Xuan, Weidong; Lan, Jian; Liu, Huan; Li, Chuanjun; Wang, Jiang; Ren, Weili; Zhong, Yunbo; Li, Xi; Ren, Zhongming

    2017-08-01

    High magnetic fields are widely used to improve the microstructure and properties of materials during the solidification process. During the preparation of single-crystal turbine blades, the microstructure of the superalloy is the main factor that determines its mechanical properties. In this work, the effects of a high magnetic field on the microstructure of Ni-based single-crystal superalloys PWA1483 and CMSX-4 during directional solidification were investigated experimentally. The results showed that the magnetic field modified the primary dendrite arm spacing, γ' phase size, and microsegregation of the superalloys. In addition, the size and volume fractions of γ/ γ' eutectic and the microporosity were decreased in a high magnetic field. Analysis of variance (ANOVA) results showed that the effect of a high magnetic field on the microstructure during directional solidification was significant ( p < 0.05). Based on both experimental results and theoretical analysis, the modification of microstructure was attributed to thermoelectric magnetic convection occurring in the interdendritic regions under a high magnetic field. The present work provides a new method to optimize the microstructure of Ni-based single-crystal superalloy blades by applying a high magnetic field.

  8. Influence of dimension box differences and time differences during operations of red box for motorcycles at signalized intersection

    NASA Astrophysics Data System (ADS)

    Mulyadi, Agah Muhammad

    2017-11-01

    Performance of signalized intersection has declined due to a large number of motorcycles. The number of motorcycles reached 98.2 million units and the composition of motorcycles has reached around 81.7% of the total composition of vehicles in Indonesia (AISI, 2017). To solve that problem, the red box for motorcycles are provided at the signalized intersection. Red box for the motorcycle at signalized intersections was developed from the concept of Advance Stop Line (ASL) for bicycles. The Red Box was developed to split the queue between motorcycles and other vehicles when waiting at red light. This paper aims to evaluate the influence of the red box dimension and red time operation differences. The survey was conducted as many as 30 cycles of traffic signals per day. The data were analyzed using software IBM SPSS Statistics 20 by using Analysis of Variance (ANOVA) to obtain p-value (significant). The analysis shows that there are insignificant influences between the occupancy rates to the dimension of Red Box. Furthermore, that there is a significant difference that shows the dependency of only motorcycles in the Red Box Area towards red time operation.

  9. Empowering caregivers: impact analysis of FamilyLink Education Programme (FLEP) in Hong Kong, Taipei and Bangkok.

    PubMed

    Chiu, Marcus Y L; Wei, Grace F W; Lee, Sing; Choovanichvong, Somrak; Wong, Frank H T

    2013-02-01

    Education and support for caregivers is lacking in Asia and the peer-led FamilyLink Education Programme (FLEP) is one of the few provisions to address this service gap. This study aims to evaluate quantitatively its efficacy in reducing subjective burdens and empowering the participants. One hundred and nine caregiver participants in three Asian cities were successfully surveyed at pre-intervention, post-intervention and six-month intervals with a number of standard inventories. Mixed analysis of variance (ANOVA) procedures showed significant programme impact over time intervals for all sites, and subsequently an empowerment measurement model was tested. FLEP was found effective in reducing worry and displeasure, significantly improving intra-psychic strain, depression and all empowerment measures. The measurement model had an acceptable good fit. Baseline difference showed no interference with the programme efficacy. Apart from the initial support for FLEP, the current study also provides some hindsight on the empowerment practice in mental health for Asia, whose sociocultural political contexts are vastly different from that of the developed countries. It remains to be seen whether qualitative data or more stringent research design will yield consistent results and whether FLEP can also work in rural areas.

  10. Modeling the low-velocity impact characteristics of woven glass epoxy composite laminates using artificial neural networks

    NASA Astrophysics Data System (ADS)

    Mathivanan, N. Rajesh; Mouli, Chandra

    2012-12-01

    In this work, a new methodology based on artificial neural networks (ANN) has been developed to study the low-velocity impact characteristics of woven glass epoxy laminates of EP3 grade. To train and test the networks, multiple impact cases have been generated using statistical analysis of variance (ANOVA). Experimental tests were performed using an instrumented falling-weight impact-testing machine. Different impact velocities and impact energies on different thicknesses of laminates were considered as the input parameters of the ANN model. This model is a feed-forward back-propagation neural network. Using the input/output data of the experiments, the model was trained and tested. Further, the effects of the low-velocity impact response of the laminates at different energy levels were investigated by studying the cause-effect relationship among the influential factors using response surface methodology. The most significant parameter is determined from the other input variables through ANOVA.

  11. Physical Activity and Depressive Symptoms in Four Ethnic Groups of Midlife Women

    PubMed Central

    Im, Eun-Ok; Ham, Ok Kyung; Chee, Eunice; Chee, Wonshik

    2014-01-01

    The purpose of this study was to determine the associations between physical activity and depression and the multiple contextual factors influencing these associations in four major ethnic-groups of midlife women in the U.S. This was a secondary analysis of the data from 542 midlife women. The instruments included questions on background characteristics and health and menopausal status; the Depression Index for Midlife Women; and the Kaiser Physical Activity Survey. The data were analyzed using chi-square tests, the ANOVA, twoway ANOVA, correlation analyses, and hierarchical multiple regression analyses. The women's depressive symptoms were negatively correlated with active living and sports/exercise physical activities whereas they were positively correlated with occupational physical activities (p < .01). Family income was the strongest predictor of their depressive symptoms. Increasing physical activity may improve midlife women's depressive symptoms, but the types of physical activity and multiple contextual factors need to be considered in intervention development. PMID:24879749

  12. Evaluation of serum sialic acid, fucose levels and their ratio in oral squamous cell carcinoma.

    PubMed

    Chinnannavar, Sangamesh Ningappa; Ashok, Lingappa; Vidya, Kodige Chandrashekhar; Setty, Sunil Mysore Kantharaja; Narasimha, Guru Eraiah; Garg, Ranjana

    2015-01-01

    Detection of cancer at the early stage is of utmost importance to decrease the morbidity and mortality of the disease. Apart from the conventional biopsy, minimally invasive methods like serum evaluation are used for screening large populations. Thus, this study aimed to estimate serum levels of sialic acid and fucose and their ratio in oral cancer patients and in healthy control group to evaluate their role in diagnosis. Serum samples were collected from 52 healthy controls (group I) and 52 squamous cell carcinoma patients (group II). Estimation of serum levels of sialic acid and fucose and their ratio was performed. This was correlated histopathologically with the grades of carcinoma. Statistical analysis was done by using analysis of variance (ANOVA) test and unpaired "t" test. Results showed that serum levels of sialic acid and fucose were significantly higher in oral cancer patients compared to normal healthy controls (P < 0.001). The sialic acid to fucose ratio was significantly lower in cancer patients than in normal controls (P < 0.01). However, comparison with histological grading, habits, gender, and age group did not show any significant result. The mean serum sialic acid and fucose levels showed an increasing trend from controls to malignant group and their corresponding ratio showed decreasing trend from controls to malignant group. The ratio of sialic acid to fucose can be a useful diagnostic aid for oral cancer patients.

  13. Analysis on the spatiotemporal characteristics of water quality and trophic states in Tiegang Reservoir: A public drinking water supply reservoir in South China

    NASA Astrophysics Data System (ADS)

    Song, Yun-long; Zhu, Jia; Li, Wang; Tao, Yi; Zhang, Jin-song

    2017-08-01

    Shenzhen is the most densely populated city in China and with a severe shortage of water. The per capita water resource is less than 200 m3, which is approximately 1/12 of the national average level. In 2016, nearly 90% of Shenzhen’s drinking water needed to be imported from the Pearl River. After arrived at Shenzhen, overseas water was firstly stockpiled in local reservoirs and then was supplied to nearby water works. Tiegang Reservoir is the largest drinking water supply reservoir and its water quality has played an important role to the city’s drinking water security. A fifteen-month’s field observation was conducted from April 2013 to June 2014 in Tiegang Reservoir, in order to analyze the temporal and spatial distribution of water quality factors and seasonal variation of trophic states. One-way ANOVA showed that significant difference was found in water quality factors on month (p<0.005). The spatial heterogeneity of water quality was obvious (p<0.05). The distribution pattern of WT, TOC, Silicate, NO3 --N, TN and Fe was pre-rainy period > latter rainy period > high temperature and rain free period > temperature jump period > winter drought period, while SD showed the contrary. Two-way ANOVA showed that months rather than locations were the key influencing factors of water quality factors succession. Tiegang reservoir was seriously polluted by TN, as a result WQI were at IV∼V level. If TN was not taken into account, WQI were atI∼III level. TLI (Σ) were about 35∼60, suggesting Tiegang reservoir was in mesotrophic and light-eutrophic trophic states. The WQI and TLI (Σ) in sampling sites 9 and 10 were poorer than that of other sites. The 14 water quality factors were divided into 5 groups by factor analysis (FA). The total interpretation rate was 73.54%. F1 represents the climatic change represented by water temperature. F2 and F4 represent the concentration of nutrients. F3 and F5 represent the sensory indexes of water body, such as turbidity, transparency. The FA results indicated that water quality potential risk factors was total nitrogen (TN), and potential risk factors also include chlorophyll-a and nitrate nitrogen (NO3 --N).

  14. Teachers' Implicit Theories of Intelligence: Influences from Different Disciplines and Scientific Theories

    ERIC Educational Resources Information Center

    Jonsson, Anna-Carin; Beach, Dennis; Korp, Helena; Erlandson, Peter

    2012-01-01

    A sample of 226 Swedish high school teachers from various knowledge domains completed self-report measures of intelligence regarding implicit theories and scientific theories of intelligence. A mixed ANOVA showed that teachers from language, social science and practical disciplines had a significant preference for an incremental theory of…

  15. Simulation of Autonomic Logistics System (ALS) Sortie Generation

    DTIC Science & Technology

    2003-03-01

    84 Appendix B. ANOVA Assumptions Mission Capable Rate ANOVA Assumptions Constant Variance SSR # X cols SSE n Breusch - Pagan Chi-square 3.57E...85 Flying Scheduling Effectiveness ANOVA Assumptions Constant Variance SSR # X cols SSE n Breusch - Pagan Chi-square 2.12E-10 3 0.000816 270...Constant Variance SSR # X cols SSE n Breusch - Pagan Chi-square 1.86E-09 3 0.003758 270 3.20308814 0.9556957 Independence Durbin-Watson

  16. Levels of PCBs in Oysters Coming from Galicia Coast: Comparison to Mussels from the Same Region.

    PubMed

    Carro, N; García, I; Ignacio, M; Mouteira, A

    2016-05-01

    PCBs were analyzed in two species of oyster (Crassostrea gigas and Ostrea edulis) cultured in intertidal beds and rafts coming from the Galician Rías during the period 2011-2014. PCBs were also analyzed in mussel (Mytilus galloprovincialis) collected in the same Rías during 2011. The main objective of this work is to investigate the distribution of PCBs in Galician oysters and to study their suitability as bioindicator in comparison to mussels. The levels of ΣPCBs (ten congeners) ranged from 5.58 to 179.49 ng g(-1) d.w. The effect of biological parameters (shell length, lipid content and condition index) on bioaccumulation of PCBs was also evaluated. ANOVA showed a statistically significant difference between species for higher chlorinated biphenyls (CBs 153 and 138). The spatial patterns were investigated. Principal Component Analysis (PCA) showed differences between geographical areas (Rías Altas, Centrales and Baixas) in the distribution of PCBs.

  17. Variety and Harvesting Season Effects on Antioxidant Activity and Vitamins Content of Citrus sinensis Macfad.

    PubMed

    Cardeñosa, Vanessa; Barreira, João C M; Barros, Lillian; Arenas-Arenas, Francisco J; Moreno-Rojas, José M; Ferreira, Isabel C F R

    2015-05-07

    Five sweet orange (Citrus sinensis Osbeck) varieties cultivated in Huelva (Spain) and picked at two seasons during two consecutive years, were characterized for their antioxidant activity (free radicals scavenging activity, reducing power and lipid peroxidation inhibition) and vitamin content (vitamin E and vitamin C). The effects induced by sweet orange variety and stage of maturity were comprehensively compared by applying 2-way ANOVA and linear discriminant analysis. The results indicated higher differences in antioxidant activity and vitamin contents in response to the effect of the harvesting season, when compared to the effect of sweet orange variety. Nevertheless, the results observed in 2012 showed less marked differences among the assayed sweet orange varieties. Either way, it might be concluded that oranges sampled in January show the highest antioxidant activity and vitamin contents. Furthermore, concerning the properties evaluated in this work, all sweet orange varieties represent good alternatives, except for Rhode Summer, which would not be the preferable choice as a target to enhance sweet orange overall characteristics.

  18. Work time control and mental health of workers working long hours: the role of gender and age.

    PubMed

    Zołnierczyk-Zreda, Dorota; Bedyńska, Sylwia; Warszewska-Makuch, Magdalena

    2012-01-01

    The aim of this study was to examine the relationship between work time control and mental health in workers working long hours. The study also attempted to show how that relationship depended on age and gender. Three hundred and six white-collar workers doing clerical work for over 8 h daily were diagnosed on work time control and mental health with the 28-item General Health Questionnaire. The results of an analysis of variance (ANOVA) showed that participants working long hours but having high control over their work time had a significantly higher level of their mental health with regard to somatic complaints and anxiety and marginally higher with regard to social dysfunction than workers with low control over their work time. Male and female workers reported different problems with their mental health depending on what age (stage of life) they were at. It is hypothesized that the work-family conflict, inability to fulfil social commitments and poor working conditions can influence those effects.

  19. Mandibular position influence on pilots' postural balance analyzed under dynamic conditions.

    PubMed

    Baldini, Alberto; Nota, Alessandro; Cioffi, Clementina; Ballanti, Fabiana; Tecco, Simona

    2017-11-01

    The aim of this study is to evaluate the influence of the mandibular position on the postural stability in a sample of civilian and military pilots. Twenty military pilots (males, mean age 35.15 ± 3.14 years) and 17 civilian pilots (males, mean 34.91 ± 2.15 years) were enrolled in this study and underwent a Sensory Organization Test (SOT) using the EquiTest® (NeuroCom International Inc., Clackamas, OR, USA) computerized dynamic posturography. The composite parameter was recorded and analyzed. The equilibrium score (ES) recorded in centric occlusion is slightly higher than the ES recorded in mandibular rest position; civilian pilots showed ESs slightly higher than military pilots. The two-way ANOVA analysis shows these differences are not statistically significant. The findings of this study seem to suggest that the composite parameter of the SOT is not sensitive in analyzing the influence of the stomatognathic system on the postural balance of civilian and military pilots.

  20. Deformation of metal brackets: a comparative study.

    PubMed

    Flores, D A; Choi, L K; Caruso, J M; Tomlinson, J L; Scott, G E; Jeiroudi, M T

    1994-01-01

    The purpose of this study was to determine the effect of material and design on the force and stress required to permanently deform metal brackets. Fourteen types of metal brackets were categorized according to raw material composition, slot torque degree, and wing type. Five types of raw materials, three types of slot torque degree, and four types of wing design were tested using an archwire torque test developed by Flores. An analysis of variance (ANOVA) and t-test showed that all three categories had a significant effect on the force and stress needed to permanently deform metal brackets. Of the three, raw material had the greatest effect on the amount of force. Results showed that 17-4PH and 303S had higher yield strengths and regular twin brackets had higher resistance to deformation. Also, as slot torque degree increased, brackets deformed with less force. Result confirmed that brackets requiring the greatest stress to permanently deform were made of steel with the greatest hardness.

  1. Coping and experiential avoidance: unique or overlapping constructs?

    PubMed

    Karekla, Maria; Panayiotou, Georgia

    2011-06-01

    The present study examined associations between coping as measured by the Brief COPE and experiential avoidance as measured by the AAQ-II and the role of both constructs in predicting psychological distress and well-being. Specifically, associations between experiential avoidance and other types of coping were examined, and factor analysis addressed the question of whether experiential avoidance is part of coping or a related but independent construct. Results showed that experiential avoidance loads on the same factor as other emotion-focused and avoidant types of coping. The higher people are in experiential avoidance, the more they tend to utilize these types of coping strategies. Both experiential avoidance and coping predicted psychological distress and well-being, with most variance explained by coping but some additional variance explained by experiential avoidance. ANOVAS also showed gender differences in experiential avoidance and coping approaches. Results are discussed in light of previous relevant findings and future treatment relevant implications. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. Statistical Investigation of the Effect of Process Parameters on the Shear Strength of Metal Adhesive Joints

    NASA Astrophysics Data System (ADS)

    Rajkumar, Goribidanur Rangappa; Krishna, Munishamaih; Narasimhamurthy, Hebbale Narayanrao; Keshavamurthy, Yalanabhalli Channegowda

    2017-06-01

    The objective of the work was to optimize sheet metal joining parameters such as adhesive material, adhesive thickness, adhesive overlap length and surface roughness for single lap joint of aluminium sheet shear strength using robust design. An orthogonal array, main effect plot, signal-to-noise ratio and analysis of variance were employed to investigate the shear strength of the joints. The statistical result shows vinyl ester is best candidate among other two polymers viz. epoxy and polyester due to its low viscosity value compared to other two polymers. The experiment results shows that the adhesive thickness 0.6 mm, overlap length 50 mm and surface roughness 2.12 µm for obtained maximum shear strength of Al sheet joints. The ANOVA result shows one of the most significant factors is overlap length which affect joint strength in addition to adhesive thickness, adhesive material, and surface roughness. A confirmation test was carried out as the optimal combination of parameters will not match with the any of the experiments in the orthogonal array.

  3. High natural antibody titers of indigenous chickens are related with increased hazard in confinement

    PubMed Central

    Wondmeneh, E.; Van Arendonk, J. A. M.; Van der Waaij, E. H.; Ducro, B. J.; Parmentier, H. K.

    2015-01-01

    Natural antibody (NAb) levels and survival rates were evaluated in 4 breeds of laying hens in Ethiopia: indigenous, improved indigenous, exotic layer, and crossbred. Titers of NAb isotypes IgG and IgM binding keyhole limpet hemocyanin (KLH) in serum were measured at 20, 26, 35, and 45 wk age. Repeated-measure ANOVA showed that IgG and IgM levels vary with time within each breed (P < 0.05). Indigenous chickens had significantly (P < 0.05) higher NAb levels at all ages. The Cox proportional hazard analysis showed increased hazard with increased levels of NAbs in the exotic layers (P < 0.05). However, the reduced hazards with increased levels of NAbs were not significant in the improved indigenous and crossbred chickens. Indigenous chickens showed increased hazard with increasing levels of NAb (P > 0.05). We concluded that not only the NAb levels but also the effect of Nabs on survival vary between indigenous and improved breeds. The results indicate that NAb levels are associated with survival in elite (improved) breeds, but are associated with increased hazard in indigenous chickens. PMID:25910906

  4. Cutting efficiency of four different rotary nickel: Titanium instruments

    PubMed Central

    Cecchin, Doglas; de Sousa-Neto, Manoel Damião; Pécora, Jesus Djalma; Gariba-Silva, Ricardo

    2011-01-01

    Aim: The aim of this study was to evaluate the cutting efficiency of rotary nickel-titanium (NiTi) instruments K3, NiTi Tee, Profile, and Quantec with taper size 04/25. Materials and Methods: The number of samples was 10 for each group (n = 10). The cutting efficiency was measured by the mass loss from each acrylic resin block after instrumentation of a simulated canal using the Crown-down technique. Results: The analysis of variance (ANOVA) showed that there was a statistically significant difference among the studied groups. The Tukey's test showed that the acrylic resin blocks prepared with instruments K3 (0.00369 ± 0.00022), NiTi Tee (0.00368 ± 0.00023), and Profile (0.00351 ± 0.00026) presented the greatest mass loss, showing no statistically significant difference among them (P < 0.05). The lowest mass loss was found in the blocks prepared with Quantec instruments (0.00311 ± 0.0003) (P < 0.05). Conclusions: It could be concluded that the K3, NiTi Tee, and Profile instruments presented a greater cutting efficiency than the Quantec instruments. PMID:21814349

  5. Interlinking backscatter, grain size and benthic community structure

    NASA Astrophysics Data System (ADS)

    McGonigle, Chris; Collier, Jenny S.

    2014-06-01

    The relationship between acoustic backscatter, sediment grain size and benthic community structure is examined using three different quantitative methods, covering image- and angular response-based approaches. Multibeam time-series backscatter (300 kHz) data acquired in 2008 off the coast of East Anglia (UK) are compared with grain size properties, macrofaunal abundance and biomass from 130 Hamon and 16 Clamshell grab samples. Three predictive methods are used: 1) image-based (mean backscatter intensity); 2) angular response-based (predicted mean grain size), and 3) image-based (1st principal component and classification) from Quester Tangent Corporation Multiview software. Relationships between grain size and backscatter are explored using linear regression. Differences in grain size and benthic community structure between acoustically defined groups are examined using ANOVA and PERMANOVA+. Results for the Hamon grab stations indicate significant correlations between measured mean grain size and mean backscatter intensity, angular response predicted mean grain size, and 1st principal component of QTC analysis (all p < 0.001). Results for the Clamshell grab for two of the methods have stronger positive correlations; mean backscatter intensity (r2 = 0.619; p < 0.001) and angular response predicted mean grain size (r2 = 0.692; p < 0.001). ANOVA reveals significant differences in mean grain size (Hamon) within acoustic groups for all methods: mean backscatter (p < 0.001), angular response predicted grain size (p < 0.001), and QTC class (p = 0.009). Mean grain size (Clamshell) shows a significant difference between groups for mean backscatter (p = 0.001); other methods were not significant. PERMANOVA for the Hamon abundance shows benthic community structure was significantly different between acoustic groups for all methods (p ≤ 0.001). Overall these results show considerable promise in that more than 60% of the variance in the mean grain size of the Clamshell grab samples can be explained by mean backscatter or acoustically-predicted grain size. These results show that there is significant predictive capacity for sediment characteristics from multibeam backscatter and that these acoustic classifications can have ecological validity.

  6. Assessment of medical students’ learning and study strategies in self-regulated learning

    PubMed Central

    JOUHARI, ZAHRA; HAGHANI, FARIBA; CHANGIZ, TAHEREH

    2016-01-01

    Introduction Research on medical students shows that adopting self-regulation of effort, time, and study strategies can positively influence academic achievement. The purpose of the current study was to assess learning and study strategies in medical students. Methods This cross-sectional study was carried out in 2014-2015 at Isfahan University of Medical Sciences. The sample size was determined 360 students based on the results of a pilot study on 30 members of the study population. Medical students in the first to fourth year of their studies were selected through simple sampling randomly. A valid and reliable Persian translation of Learning and Study Strategies Inventory (LASSI) questionnaire was completed by the students. It measures three latent factors of self-regulated learning: Skill, Will, and Self-Regulation. It consists of 80 questions in ten different scales (each scale including eight questions and a variable score of 8-40). Data were analyzed using t-test, correlation analysis, and ANOVA. Results Considering the ten LASSI scales, the highest mean score belonged to test strategies (28.67±4.44), and the lowest mean to self-testing (21.91±4.91). The results showed significant statistical differences between male and female students in selecting the main idea, attitude, and self-testing. ANOVA and post hoc Tukey tests showed a significant difference between the mean scores of different areas of LASSI among students with different grade point average (GPA) in the university. In all areas except the study aids, the mean scores of students with GPA higher than 17.5 were significantly higher than those of students with GPA lower than 14.5. Conclusion The results showed that students need help and consultation in most areas of learning and study strategies. Using 10 areas of LASSI can determine the strengths and weaknesses of students in various areas. Knowing their own limitations, students will be able to improve their study habits. Hence, it is suggested to evaluate the students when enrolling at universities and design educational programs based on the students’ characteristics. PMID:27104201

  7. T-cell homeostasis in breast cancer survivors with persistent fatigue.

    PubMed

    Bower, Julienne E; Ganz, Patricia A; Aziz, Najib; Fahey, John L; Cole, Steve W

    2003-08-06

    Approximately 30% of women successfully treated for breast cancer suffer persistent fatigue of unknown origin. Recent studies linking inflammatory processes to central nervous system-mediated fatigue led us to examine cellular immune system status in 20 fatigued breast cancer survivors and 19 matched non-fatigued breast cancer survivors. Fatigued survivors, compared with non-fatigued survivors, had statistically significantly increased numbers of circulating T lymphocytes (mean 31% increase, 95% confidence interval [CI] = 6% to 56%; P =.015 by two-sided analysis of variance [ANOVA]), with pronounced elevation in the numbers of CD4+ T lymphocytes (mean 41% increase, 95% CI = 15% to 68%; P =.003 by two-sided ANOVA) and CD56+ effector T lymphocytes (mean 52% increase, 95% CI = 4% to 99%; P =.027 by two-sided ANOVA). These changes were independent of patient demographic and treatment characteristics. Absolute numbers of B cells, natural killer cells, granulocytes, and monocytes were not altered. The increased numbers of circulating T cells correlated with elevations in the level of serum interleukin 1 receptor antagonist (for CD3+ cells, r =.56 and P =.001; for CD3+/CD4+ cells, r =.68 and P<.001, by Spearman rank correlation). Results of this study suggest that persistent fatigue in breast cancer survivors might be associated with a chronic inflammatory process involving the T-cell compartment. These results require confirmation in a larger study that is specifically designed to address this hypothesis.

  8. Effectiveness of myofascial trigger point manual therapy combined with a self-stretching protocol for the management of plantar heel pain: a randomized controlled trial.

    PubMed

    Renan-Ordine, Rômulo; Alburquerque-Sendín, Francisco; de Souza, Daiana Priscila Rodrigues; Cleland, Joshua A; Fernández-de-Las-Peñas, César

    2011-02-01

    A randomized controlled clinical trial. To investigate the effects of trigger point (TrP) manual therapy combined with a self-stretching program for the management of patients with plantar heel pain. Previous studies have reported that stretching of the calf musculature and the plantar fascia are effective management strategies for plantar heel pain. However, it is not known if the inclusion of soft tissue therapy can further improve the outcomes in this population. Sixty patients, 15 men and 45 women (mean ± SD age, 44 ± 10 years) with a clinical diagnosis of plantar heel pain were randomly divided into 2 groups: a self-stretching (Str) group who received a stretching protocol, and a self-stretching and soft tissue TrP manual therapy (Str-ST) group who received TrP manual interventions (TrP pressure release and neuromuscular approach) in addition to the same self-stretching protocol. The primary outcomes were physical function and bodily pain domains of the quality of life SF-36 questionnaire. Additionally, pressure pain thresholds (PPT) were assessed over the affected gastrocnemii and soleus muscles, and over the calcaneus, by an assessor blinded to the treatment allocation. Outcomes of interest were captured at baseline and at a 1-month follow-up (end of treatment period). Mixed-model ANOVAs were used to examine the effects of the interventions on each outcome, with group as the between-subjects variable and time as the within-subjects variable. The primary analysis was the group-by-time interaction. The 2 × 2 mixed-model analysis of variance (ANOVA) revealed a significant group-by-time interaction for the main outcomes of the study: physical function (P = .001) and bodily pain (P = .005); patients receiving a combination of self-stretching and TrP tissue intervention experienced a greater improvement in physical function and a greater reduction in pain, as compared to those receiving the self-stretching protocol. The mixed ANOVA also revealed significant group-by-time interactions for changes in PPT over the gastrocnemii and soleus muscles, and the calcaneus (all P<.001). Patients receiving a combination of self-stretching and TrP tissue intervention showed a greater improvement in PPT, as compared to those who received only the self-stretching protocol. This study provides evidence that the addition of TrP manual therapies to a self-stretching protocol resulted in superior short-term outcomes as compared to a self-stretching program alone in the treatment of patients with plantar heel pain. Therapy, level 1b.

  9. Demonstrating the Effects of Shop Flow Process Variability on the Air Force Depot Level Reparable Item Pipeline

    DTIC Science & Technology

    1992-09-01

    Crawford found that pipeline contents are extremely variable about their mean (10:24) and Kettner and Wheatley said that "a statistical analysis of data...write the results from this replication "* to the ANOVA files for later analysis . The first set outputs points "* for overall pipeline contents . The...families and friends for their unselfishness and support. Marvin A. Arostegui and Jon A. Larvick ii Table of Contents Page Preface

  10. Over-the-counter pharmaceuticals: exploratory research of consumer preference toward solid oral dosage forms.

    PubMed

    Reisenwitz, T H; Wimbish, G J

    1996-01-01

    The capsule dosage form in nonprescription pharmaceuticals persists as being one of the most vulnerable to product tampering. This study examines consumer preference toward three solid oral dosage forms (capsules, caplets, and tablets) in nonprescription products. Thirteen independent variables representing dosage form attributes are measured on semantic differential scales. The data are analyzed using analysis of variance (ANOVA) and factor analysis. Implications for the pharmaceutical marketer are noted. Future directions for research are also outlined.

  11. Perception and practice regarding allergen labeling: focus on food-related employees.

    PubMed

    Park, Si-Eun; Kwon, Yong-Seok; Paik, Jin-Kyoung; Kwak, Tong-Kyung; Hong, Wan-Soo

    2016-08-01

    Most consumers are able to recognize allergenic foods. However, the frequency of checking such foods is reportedly low, resulting in higher prevalence of food-related allergic reactions in Korea compared to other countries. Thus, this study was performed to investigate the overall perception of allergenic food labeling and its practice level in food manufacturing company employees. The survey was administered to food safety employees and food development teams at food companies located in metropolitan areas. A total of 399 (93.8%) valid samples were used in the final analysis. Statistical analyses, including Frequency Analysis, t-test, Anova, PCA (Principal Component Analysis), and Pearson Correlation Analysis using SPSS ver. 21.0, were performed. The correct answer rate in the analysis of allergy-related knowledge level ranged from 15.0% to 89.7%. Analysis of differences in allergy-related perception by knowledge level showed significant differences in introduction of a food recall system, strengthening of relevant laws and regulations, content labeling, description of substitutional food, and differentiated package by age. It can be concluded that labeling of allergenic foods should be made easier and more convenient for checking by employees, developers, and consumers, and it is necessary to provide contents through the development of publicity, guidelines, or APP along with labeling.

  12. Violation of the Sphericity Assumption and Its Effect on Type-I Error Rates in Repeated Measures ANOVA and Multi-Level Linear Models (MLM).

    PubMed

    Haverkamp, Nicolas; Beauducel, André

    2017-01-01

    We investigated the effects of violations of the sphericity assumption on Type I error rates for different methodical approaches of repeated measures analysis using a simulation approach. In contrast to previous simulation studies on this topic, up to nine measurement occasions were considered. Effects of the level of inter-correlations between measurement occasions on Type I error rates were considered for the first time. Two populations with non-violation of the sphericity assumption, one with uncorrelated measurement occasions and one with moderately correlated measurement occasions, were generated. One population with violation of the sphericity assumption combines uncorrelated with highly correlated measurement occasions. A second population with violation of the sphericity assumption combines moderately correlated and highly correlated measurement occasions. From these four populations without any between-group effect or within-subject effect 5,000 random samples were drawn. Finally, the mean Type I error rates for Multilevel linear models (MLM) with an unstructured covariance matrix (MLM-UN), MLM with compound-symmetry (MLM-CS) and for repeated measures analysis of variance (rANOVA) models (without correction, with Greenhouse-Geisser-correction, and Huynh-Feldt-correction) were computed. To examine the effect of both the sample size and the number of measurement occasions, sample sizes of n = 20, 40, 60, 80, and 100 were considered as well as measurement occasions of m = 3, 6, and 9. With respect to rANOVA, the results plead for a use of rANOVA with Huynh-Feldt-correction, especially when the sphericity assumption is violated, the sample size is rather small and the number of measurement occasions is large. For MLM-UN, the results illustrate a massive progressive bias for small sample sizes ( n = 20) and m = 6 or more measurement occasions. This effect could not be found in previous simulation studies with a smaller number of measurement occasions. The proportionality of bias and number of measurement occasions should be considered when MLM-UN is used. The good news is that this proportionality can be compensated by means of large sample sizes. Accordingly, MLM-UN can be recommended even for small sample sizes for about three measurement occasions and for large sample sizes for about nine measurement occasions.

  13. Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions.

    PubMed

    Fraga, Marcelo Reis; Rodrigues, Andréia Fialho; Ribeiro, Luiz Claudio; Campos, Marcio José da Silva; Vitral, Robert Willer Farinazzo

    2013-10-29

    The present study aimed to determine and compare the anteroposterior position of the condyle in the mandibular fossa between groups of asymptomatic subjects with normal occlusion and asymptomatic subjects with Class I, Class II Division 1, and Class III malocclusions. Thirty persons with normal occlusion, 30 with Class I malocclusion, 30 with Class II Division 1, and 30 with Class III had computed tomography scans of their temporomandibular joints. The anterior joint space/posterior joint space (AJS/PJS) ratio was determined for the right and left joints. The paired t test was used to analyze the AJS/PJS ratio between both sides for each group. The ANOVA test was applied to verify the differences between the groups for the measurements of the right and left sides. In case the ANOVA test confirmed significance, the Dunnett's t test was performed to compare the groups of malocclusion with that of normal occlusion. The paired t test between the AJS/PJS relationships in the right and left sides showed the following p values: Class I (0.168), Class II Division 1 (0.662), Class III (0.991), and normal occlusion (0.390). The ANOVA test showed a p value of 0.445 for the comparisons of the right side and 0.040 for the left side. The Dunnett's t test demonstrated a statistically significant difference between the Class II group and the normal occlusion group (p value of 0.026) in the joints of the left side. Bilateral symmetry and lack of condyle centralization were common characteristics among all groups. The greatest condylar decentralization was observed in the Class II group, whereas the least condylar decentralization was found in the normal occlusion group.

  14. Binary similarity measures for fingerprint analysis of qualitative metabolomic profiles.

    PubMed

    Rácz, Anita; Andrić, Filip; Bajusz, Dávid; Héberger, Károly

    2018-01-01

    Contemporary metabolomic fingerprinting is based on multiple spectrometric and chromatographic signals, used either alone or combined with structural and chemical information of metabolic markers at the qualitative and semiquantitative level. However, signal shifting, convolution, and matrix effects may compromise metabolomic patterns. Recent increase in the use of qualitative metabolomic data, described by the presence (1) or absence (0) of particular metabolites, demonstrates great potential in the field of metabolomic profiling and fingerprint analysis. The aim of this study is a comprehensive evaluation of binary similarity measures for the elucidation of patterns among samples of different botanical origin and various metabolomic profiles. Nine qualitative metabolomic data sets covering a wide range of natural products and metabolomic profiles were applied to assess 44 binary similarity measures for the fingerprinting of plant extracts and natural products. The measures were analyzed by the novel sum of ranking differences method (SRD), searching for the most promising candidates. Baroni-Urbani-Buser (BUB) and Hawkins-Dotson (HD) similarity coefficients were selected as the best measures by SRD and analysis of variance (ANOVA), while Dice (Di1), Yule, Russel-Rao, and Consonni-Todeschini 3 ranked the worst. ANOVA revealed that concordantly and intermediately symmetric similarity coefficients are better candidates for metabolomic fingerprinting than the asymmetric and correlation based ones. The fingerprint analysis based on the BUB and HD coefficients and qualitative metabolomic data performed equally well as the quantitative metabolomic profile analysis. Fingerprint analysis based on the qualitative metabolomic profiles and binary similarity measures proved to be a reliable way in finding the same/similar patterns in metabolomic data as that extracted from quantitative data.

  15. [Mollusks community associated to Thalassia testudinum (Bank et Köning 1805), in Mochima Bay, Venezuela].

    PubMed

    Díaz, Oscar Díaz; Liñero-Arana, Ildefonso

    2004-01-01

    To study the community of mollusks associated to Thalassia testudinum, monthly samplings were made between January and December 2002 in four localities of the Bay of Mochima. A PVC corer, of 14.8 cm of diameter, was used for sampling; eight monthly replicates were taken in each locality. Each core was sifted in a sieve of 1mm of mesh opening, the mollusks were fixed in 8% formaldehide solution in sea water. 473 mollusks were analyzed and 40 species, belonging to 29 families, were identified. Mangle Quemao displayed the greater abundance, whereas Varadero the minor. Shannon-Weaver diversity average ranged between 2.02+/-0.43 bits.ind(-1) (Mangle Quemao) and 1.42+/-0.95 bits.ind(-1) (Toporo). ANOVA analysis showed significant differences in abundances of mollusks among localities.

  16. Lack of Thy1 (CD90) expression in neuroblastomas is correlated with impaired survival.

    PubMed

    Fiegel, Henning C; Kaifi, Jussuf T; Quaas, Alexander; Varol, Emine; Krickhahn, Annika; Metzger, Roman; Sauter, Guido; Till, Holger; Izbicki, Jakob R; Erttmann, Rudolf; Kluth, Dietrich

    2008-01-01

    Neuroblastoma (NBL) is the most common solid tumor in children. Tumors in advanced stage or with positive risk factors still have a poor prognosis. Thy1 (CD90) is a membrane glycoprotein expressed in thymus, retinal ganglionic cells, and several types of stem cells. The aim of this study was to assess Thy1 expression in NBL and analyze the correlation with clinical outcome. Sixty-three specimens of NBL were stained for Thy1 on a tissue microarray by immunohistochemistry. Fresh frozen tumor tissues were used for RNA isolation, and RT-PCR analysis for Thy1-mRNA expression was performed. Patients' survival data were correlated with Thy1 status using a log rank test and a Cox regression multivariate analysis. Thy1 was expressed on 51 (81%) of the tumors. Kaplan-Meier survival analysis showed a significantly impaired survival in patients with NBL missing Thy1 (P < 0.005 by log-rank test). A multivariate Cox regression showed an independent prognostic value of Thy1 status for overall survival (P < 0.05). In addition, the frequency of events and deaths was significantly higher in the group of patients with Thy1 negative tumors, as assessed by ANOVA analysis (P < 0.05 by F-test). The data showed that Thy1-negative NBL patients have a significantly impaired overall survival compared with Thy1-positive NBL patients. Thus, Thy1 seemed to be a marker with a specific prognostic value in NBL patients. Future studies are aiming at the biological role of this marker in the tumor cell differentiation.

  17. Mechanical and interfacial characterization of laser welded Co-Cr alloy with different joint configurations

    PubMed Central

    Kokolis, John; Chakmakchi, Makdad; Theocharopoulos, Antonios; Prombonas, Anthony

    2015-01-01

    PURPOSE The mechanical and interfacial characterization of laser welded Co-Cr alloy with two different joint designs. MATERIALS AND METHODS Dumbbell cast specimens (n=30) were divided into 3 groups (R, I, K, n=10). Group R consisted of intact specimens, group I of specimens sectioned with a straight cut, and group K of specimens with a 45° bevel made at the one welding edge. The microstructure and the elemental distributions of alloy and welding regions were examined by an SEM/EDX analysis and then specimens were loaded in tension up to fracture. The tensile strength (TS) and elongation (ε) were determined and statistically compared among groups employing 1-way ANOVA, SNK multiple comparison test (α=.05) and Weibull analysis where Weibull modulus m and characteristic strength σο were identified. Fractured surfaces were imaged by a SEM. RESULTS SEM/EDX analysis showed that cast alloy consists of two phases with differences in mean atomic number contrast, while no mean atomic number was identified for welded regions. EDX analysis revealed an increased Cr and Mo content at the alloy-joint interface. All mechanical properties of group I (TS, ε, m and σο) were found inferior to R while group K showed intermediated values without significant differences to R and I, apart from elongation with group R. The fractured surfaces of all groups showed extensive dendritic pattern although with a finer structure in the case of welded groups. CONCLUSION The K shape joint configuration should be preferred over the I, as it demonstrates improved mechanical strength and survival probability. PMID:25722836

  18. Domestic Division of Labor and Its Relationship to Sex Role Orientation and Work Attitudes in Working Couples.

    ERIC Educational Resources Information Center

    Gunter, Nancy C.; Gunter, B. G.

    This study examined the relationship of gender, sex role orientation, and work attitudes to the domestic division of labor in 141 working couples. Couples completed the Bem Sex Role Inventory and a questionnaire on the performance of household tasks. Analysis of variance (ANOVA) confirmed that working women performed a disproportionately larger…

  19. Gender and Ability Attentional Differences while Watching an Educational Television Program.

    ERIC Educational Resources Information Center

    Clariana, Roy B.

    This study investigated the attention or arousal of above and below average boys and girls while viewing a science television program on videotape. Skin resistance (GSR) was measured by a biosensor attached to a microcomputer and served as the dependent variable. Analysis of the data included a 2x2x8 ANOVA of gender v. ability v. GSR. The…

  20. ANOVA Analysis of Student Daily Test Scores in Multi-Day Test Periods

    ERIC Educational Resources Information Center

    Mouritsen, Matthew L.; Davis, Jefferson T.; Jones, Steven C.

    2016-01-01

    Instructors are often concerned when giving multiple-day tests because students taking the test later in the exam period may have an advantage over students taking the test early in the exam period due to information leakage. However, exam scores seemed to decline as students took the same test later in a multi-day exam period (Mouritsen and…

Top