Anderson, D Y; Vredeveld, G N; Brake, S R; Buchanan, T F; Lewis, J F
1983-12-01
A previous study indicated that the API 230E system can identify coagulase-negative Staphylococcus species. A study was devised to evaluate the use of the API 20E system for this purpose. Because of the current interest in Staphylococcus saprophyticus the relationship of the API 20E results to novobiocin susceptibility was also examined. One hundred forty-nine isolates of coagulase-negative staphylococci from urine cultures were tested with the API 20E system. The identification of 49 isolates was confirmed by Kloos and Schleifer method. We found that the routine API 20E system did not provide more information than novobiocin susceptibility studies alone, and that there was good but not absolute correlation between novobiocin resistance and identification of S. saprophyticus.
Martinez-Urtaza, Jaime; Lozano-Leon, Antonio; Viña-Feas, Alejandro; de Novoa, Jacobo; Garcia-Martin, Oscar
2006-02-01
Genetic differences in clinical and environmental strains of Vibrio parahaemolyticus have been widely used as criteria in identifying pathogenic isolates. However, few studies have been carried out to assess the differences in biochemical characteristics of V. parahaemolyticus isolates from human and environmental sources. We compared the biochemical profiles obtained by the characterization of V. parahaemolyticus isolates from human infections and the marine environment using the API 20E system. Environmental and clinical isolates showed significant differences in the gelatin and arabinose tests. Additionally, clinical isolates were correctly identified according to the API 20E profile using 0.85% NaCl diluent, but they presented nonspecific profiles with 2% NaCl diluent. In contrast, use of 2% NaCl diluent facilitated correct identification of the environmental isolates. Clinical isolates showed significant differences in up to five biochemical tests with respect to the API 20E database. The API 20E system is widely used in routine identification of bacteria in clinical laboratories, and this discrepancy in an important number of biochemical tests may lead to misidentification of V. parahaemolyticus infection.
Determination of sorption of seventy-five pharmaceuticals in sewage sludge.
Hörsing, Maritha; Ledin, Anna; Grabic, Roman; Fick, Jerker; Tysklind, Mats; la Cour Jansen, Jes; Andersen, Henrik R
2011-10-01
Sorption of 75 active pharmaceutical ingredients (APIs) to three different types of sludge (primary sludge, secondary sludge with short and long sludge age respectively) were investigated. To obtain the sorption isotherms batch studies with the APIs mixture were performed in four nominal concentrations to water containing 1 g of sludge. The range of APIs concentrations was between ng L(-1) to μg L(-1) which are found in the wastewater effluents. Isotherms were obtained for approximately 45 of the APIs, providing distribution coefficients for linear (Kd), Freundlich (Kf) and Langmuir (KL) isotherms. Kd, Kf and KL ranging between 7.1×10(4) and 3.8×10(7), 1.1×10(-2) and 6.1×10(4) and 9.2×10(-3) and 1.1 L kg(-1), respectively. The obtained coefficients were applied to estimate the fraction of APIs in the water phase (see Abstract Graphic). For 37 of the 75 APIs, the predicted presence in the liquid phase was estimated to >80%. 24 APIs were estimated to be present in the liquid phase between 20 and 80%, and 14 APIs were found to have <20% presence in the liquid phase, i.e. high affinity towards sludge. Furthermore, the effect of pH at values 6, 7 and 8 was evaluated using one way ANOVA-test. A significant difference in Kds due to pH changes were found for 6 of the APIs (variation 10-20%). Copyright © 2011 Elsevier Ltd. All rights reserved.
Gepp, Barbara; Lengger, Nina; Bublin, Merima; Hemmer, Wolfgang; Breiteneder, Heimo; Radauer, Christian
2014-01-01
Background Characterization of IgE-binding epitopes of allergens and determination of their patient-specific relevance is crucial for the diagnosis and treatment of allergy. Objective We sought to assess the contribution of specific surface areas of the major birch pollen allergen Bet v 1.0101 to binding IgE of individual patients. Methods Four distinct areas of Bet v 1 representing in total 81% of its surface were grafted onto the scaffold of its homolog, Api g 1.0101, to yield the chimeras Api-Bet-1 to Api-Bet-4. The chimeras were expressed in Escherichia coli and purified. IgE binding of 64 sera from Bet v 1–sensitized subjects with birch pollen allergy was determined by using direct ELISA. Specificity was assessed by means of inhibition ELISA. Results rApi g 1.0101, Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4 bound IgE from 44%, 89%, 80%, 78%, and 48% of the patients, respectively. By comparing the amount of IgE binding to the chimeras and to rApi g 1.0101, 81%, 70%, 75%, and 45% of the patients showed significantly enhanced IgE binding to Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4, respectively. The minority (8%) of the sera revealed enhanced IgE binding exclusively to a single chimera, whereas 31% showed increased IgE binding to all 4 chimeras compared with rApi g 1.0101. The chimeras inhibited up to 70% of IgE binding to rBet v 1.0101, confirming the specific IgE recognition of the grafted regions. Conclusion The Bet v 1–specific IgE response is polyclonal, and epitopes are spread across the entire Bet v 1 surface. Furthermore, the IgE recognition profile of Bet v 1 is highly patient specific. PMID:24529686
Gepp, Barbara; Lengger, Nina; Bublin, Merima; Hemmer, Wolfgang; Breiteneder, Heimo; Radauer, Christian
2014-07-01
Characterization of IgE-binding epitopes of allergens and determination of their patient-specific relevance is crucial for the diagnosis and treatment of allergy. We sought to assess the contribution of specific surface areas of the major birch pollen allergen Bet v 1.0101 to binding IgE of individual patients. Four distinct areas of Bet v 1 representing in total 81% of its surface were grafted onto the scaffold of its homolog, Api g 1.0101, to yield the chimeras Api-Bet-1 to Api-Bet-4. The chimeras were expressed in Escherichia coli and purified. IgE binding of 64 sera from Bet v 1-sensitized subjects with birch pollen allergy was determined by using direct ELISA. Specificity was assessed by means of inhibition ELISA. rApi g 1.0101, Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4 bound IgE from 44%, 89%, 80%, 78%, and 48% of the patients, respectively. By comparing the amount of IgE binding to the chimeras and to rApi g 1.0101, 81%, 70%, 75%, and 45% of the patients showed significantly enhanced IgE binding to Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4, respectively. The minority (8%) of the sera revealed enhanced IgE binding exclusively to a single chimera, whereas 31% showed increased IgE binding to all 4 chimeras compared with rApi g 1.0101. The chimeras inhibited up to 70% of IgE binding to rBet v 1.0101, confirming the specific IgE recognition of the grafted regions. The Bet v 1-specific IgE response is polyclonal, and epitopes are spread across the entire Bet v 1 surface. Furthermore, the IgE recognition profile of Bet v 1 is highly patient specific. Copyright © 2014 The Authors. Published by Mosby, Inc. All rights reserved.
IgE-Api m 4 Is Useful for Identifying a Particular Phenotype of Bee Venom Allergy.
Ruiz, B; Serrano, P; Moreno, C
Different clinical behaviors have been identified in patients allergic to bee venom. Compound-resolved diagnosis could be an appropriate tool for investigating these differences. The aims of this study were to analyze whether specific IgE to Api m 4 (sIgE-Api m 4) can identify a particular kind of bee venom allergy and to describe response to bee venom immunotherapy (bVIT). Prospective study of 31 patients allergic to bee venom who were assigned to phenotype group A (sIgE-Api m 4 <0.98 kU/L), treated with native aqueous (NA) extract, or phenotype group B (sIgE-Api m 4 ≥0.98 kU/L), treated with purified aqueous (PA) extract. Sex, age, cardiovascular risk, severity of preceding sting reaction, exposure to beekeeping, and immunological data (intradermal test, sIgE/sIgG4-Apis-nApi m 1, and sIgE-rApi m 2-Api m 4 were analyzed. Systemic reactions (SRs) during bVIT build-up were analyzed. Immunological and sting challenge outcomes were evaluated in each group after 1 and 2 years of bVIT. Phenotype B patients had more severe reactions (P=.049) and higher skin sensitivity (P=.011), baseline sIgE-Apis (P=.0004), sIgE-nApi m 1 (P=.0004), and sIgG4-Apis (P=.027) than phenotype A patients. Furthermore, 41% of patients in group B experienced SRs during the build-up phase with NA; the sting challenge success rate in this group was 82%. There were no significant reductions in serial intradermal test results, but an intense reduction in sIgE-nApi m 1 (P=.013) and sIgE-Api m 4 (P=.004) was observed after the first year of bVIT. Use of IgE-Api m 4 as the only discrimination criterion demonstrated differences in bee venom allergy. Further investigation with larger populations is necessary.
Frick, Marcel; Fischer, Jörg; Helbling, Arthur; Ruëff, Franziska; Wieczorek, Dorothea; Ollert, Markus; Pfützner, Wolfgang; Müller, Sabine; Huss-Marp, Johannes; Dorn, Britta; Biedermann, Tilo; Lidholm, Jonas; Ruecker, Gerta; Bantleon, Frank; Miehe, Michaela; Spillner, Edzard; Jakob, Thilo
2016-12-01
Component resolution recently identified distinct sensitization profiles in honey bee venom (HBV) allergy, some of which were dominated by specific IgE to Api m 3 and/or Api m 10, which have been reported to be underrepresented in therapeutic HBV preparations. We performed a retrospective analysis of component-resolved sensitization profiles in HBV-allergic patients and association with treatment outcome. HBV-allergic patients who had undergone controlled honey bee sting challenge after at least 6 months of HBV immunotherapy (n = 115) were included and classified as responder (n = 79) or treatment failure (n = 36) on the basis of absence or presence of systemic allergic reactions upon sting challenge. IgE reactivity to a panel of HBV allergens was analyzed in sera obtained before immunotherapy and before sting challenge. No differences were observed between responders and nonresponders regarding levels of IgE sensitization to Api m 1, Api m 2, Api m 3, and Api m 5. In contrast, Api m 10 specific IgE was moderately but significantly increased in nonresponders. Predominant Api m 10 sensitization (>50% of specific IgE to HBV) was the best discriminator (specificity, 95%; sensitivity, 25%) with an odds ratio of 8.444 (2.127-33.53; P = .0013) for treatment failure. Some but not all therapeutic HBV preparations displayed a lack of Api m 10, whereas Api m 1 and Api m 3 immunoreactivity was comparable to that of crude HBV. In line with this, significant Api m 10 sIgG 4 induction was observed only in those patients who were treated with HBV in which Api m 10 was detectable. Component-resolved sensitization profiles in HBV allergy suggest predominant IgE sensitization to Api m 10 as a risk factor for treatment failure in HBV immunotherapy. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.
Ren, Hui; Koo, Junghui; Guan, Baoxiang; Yue, Ping; Deng, Xingming; Chen, Mingwei; Khuri, Fadlo R; Sun, Shi-Yong
2013-11-22
The novel Akt inhibitor, API-1, induces apoptosis through undefined mechanisms. The current study focuses on revealing the mechanisms by which API-1 induces apoptosis. API-1 rapidly and potently reduced the levels of Mcl-1 primarily in API-1-senstive lung cancer cell lines. Ectopic expression of Mcl-1 protected cells from induction of apoptosis by API-1. API-1 treatment decreased the half-life of Mcl-1, whereas inhibition of the proteasome with MG132 rescued Mcl-1 reduction induced by API-1. API-1 decreased Mcl-1 levels accompanied with a rapid increase in Mcl-1 phosphorylation (S159/T163). Moreover, inhibition of GSK3 inhibited Mcl-1 phosphorylation and reduction induced by API-1 and antagonized the effect of API-1 on induction of apoptosis. Knockdown of either FBXW7 or β-TrCP alone, both of which are E3 ubiquitin ligases involved in Mcl-1 degradation, only partially rescued Mcl-1 reduction induced by API-1. However, double knockdown of both E3 ubiquitin ligases enhanced the rescue of API-1-induced Mcl-1 reduction. API-1 induces GSK3-dependent, β-TrCP- and FBXW7-mediated Mcl-1 degradation, resulting in induction of apoptosis.
2013-01-01
Background The novel Akt inhibitor, API-1, induces apoptosis through undefined mechanisms. The current study focuses on revealing the mechanisms by which API-1 induces apoptosis. Results API-1 rapidly and potently reduced the levels of Mcl-1 primarily in API-1-senstive lung cancer cell lines. Ectopic expression of Mcl-1 protected cells from induction of apoptosis by API-1. API-1 treatment decreased the half-life of Mcl-1, whereas inhibition of the proteasome with MG132 rescued Mcl-1 reduction induced by API-1. API-1 decreased Mcl-1 levels accompanied with a rapid increase in Mcl-1 phosphorylation (S159/T163). Moreover, inhibition of GSK3 inhibited Mcl-1 phosphorylation and reduction induced by API-1 and antagonized the effect of API-1 on induction of apoptosis. Knockdown of either FBXW7 or β-TrCP alone, both of which are E3 ubiquitin ligases involved in Mcl-1 degradation, only partially rescued Mcl-1 reduction induced by API-1. However, double knockdown of both E3 ubiquitin ligases enhanced the rescue of API-1-induced Mcl-1 reduction. Conclusions API-1 induces GSK3-dependent, β-TrCP- and FBXW7-mediated Mcl-1 degradation, resulting in induction of apoptosis. PMID:24261825
Keçeli, Sema Aşkın; Dündar, Devrim; Tamer, Gülden Sönmez
2016-02-01
Candida species are generally identified by conventional methods such as germ tube or morphological appearance on corn meal agar, biochemical methods using API kits and molecular biological methods. Alternative to these methods, rapid and accurate identification methods of microorganisms called matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDİ-TOF MS) has recently been described. In this study, Candida identification results by API Candida kit, API 20C AUX kit and identifications on corn meal agar (CMA) are compared with the results obtained on Vitek-MS. All results were confirmed by sequencing internal transcribed spacer (ITS) regions of rDNA. Totally, 97 Candida strains were identified by germ tube test, CMA, API and Vitek-MS. Vitek-MS results were compatible with 74.2 % of API 20C AUX and 81.4 % of CMA results. The difference between the results of API Candida and API 20C AUX was detected. The ratio of discrepancy between Vitek-MS and API 20C AUX was 25.8 %. Candida species mostly identified as C. famata or C. tropicalis by and not compatible with API kits were identified as C. albicans by Vitek-MS. Sixteen Candida species having discrepant results with Vitek-MS, API or CMA were randomly chosen, and ITS sequence analysis was performed. The results of sequencing were compatible 56.2 % with API 20C AUX, 50 % with CMA and 93.7 % with Vitek-MS. When compared with conventional identification methods, MS results are more reliable and rapid for Candida identification. MS system may be used as routine identification method in clinical microbiology laboratories.
In Vivo Efficacy and Pharmacokinetics of Optimized Apidaecin Analogs
NASA Astrophysics Data System (ADS)
Schmidt, Rico; Knappe, Daniel; Wende, Elisabeth; Ostorházi, Eszter; Hoffmann, Ralf
2017-03-01
Proline-rich antimicrobial peptides (PrAMPs) represent promising alternative therapeutic options for the treatment of multidrug-resistant bacterial infections. PrAMPs are predominantly active against Gram-negative bacteria by inhibiting protein expression via at least two different modes of action, i.e., blocking the ribosomal exit tunnel of 70S ribosomes (oncocin-type binding) or inhibiting the assembly of the 50S ribosomal subunit (apidaecin-type binding). The in vivo efficacy and favorable biodistribution of oncocins confirmed the therapeutic potential of short PrAMPs for the first time, whereas the in vivo evaluation of apidaecins is still limited despite the promising efficacy of apidaecin-analog Api88 in an intraperitoneal murine infection model. Here, the in vivo efficacy of apidaecin-analog Api137 was studied, which rescued all NMRI mice from a lethal intraperitoneal infection with E. coli ATCC 25922 when administered three times intraperitoneal at doses of 0.6 mg/kg starting one hour after infection. When Api88 and Api137 were administered intravenous or intraperitoneal at doses of 5 and 20 mg/kg, their plasma levels were similarly low (<3 µg/mL) and fourfold lower than for oncocin-analog Onc72. This contradicted earlier expectation based on the very low serum stability of Api88 with a half-life time of only 5 min compared to 6 hrs and 3 hrs for Api137 and Onc72, respectively. Pharmacokinetic data relying on a sensitive mass spectrometry method utilizing multiple reaction monitoring and isotope-labeled peptides revealed that Api88 and Api137 were present in blood, urine, and kidney, and liver homogenates at similar levels accompanied by the same major metabolites comprising residues 1-16 and 1-17. The pretended discrepancy was solved, when all peptides were incubated in peritoneal lavage. Api137 was rapidly degraded at the C-terminus, while Api88 was rather stable despite releasing the same degradation products. Onc72 was very stable explaining its higher plasma levels compared to Api88 and Api137 after intraperitoneal administration illuminating its good in vivo efficacy. The data indicate that the degradation of therapeutic peptides should be studied in serum and further body fluids. Moreover, the high efficacy in murine infection models and the fast clearance of Api88 and Api137 within 60 min after intravenous and 90 min after intraperitoneal injections indicate that
Component resolution reveals additional major allergens in patients with honeybee venom allergy.
Köhler, Julian; Blank, Simon; Müller, Sabine; Bantleon, Frank; Frick, Marcel; Huss-Marp, Johannes; Lidholm, Jonas; Spillner, Edzard; Jakob, Thilo
2014-05-01
Detection of IgE to recombinant Hymenoptera venom allergens has been suggested to improve the diagnostic precision in Hymenoptera venom allergy. However, the frequency of sensitization to the only available recombinant honeybee venom (HBV) allergen, rApi m 1, in patients with HBV allergy is limited, suggesting that additional HBV allergens might be of relevance. We performed an analysis of sensitization profiles of patients with HBV allergy to a panel of HBV allergens. Diagnosis of HBV allergy (n = 144) was based on history, skin test results, and allergen-specific IgE levels to HBV. IgE reactivity to 6 HBV allergens devoid of cross-reactive carbohydrate determinants (CCD) was analyzed by ImmunoCAP. IgE reactivity to rApi m 1, rApi m 2, rApi m 3, nApi m 4, rApi m 5, and rApi m 10 was detected in 72.2%, 47.9%, 50.0%, 22.9%, 58.3%, and 61.8% of the patients with HBV allergy, respectively. Positive results to at least 1 HBV allergen were detected in 94.4%. IgE reactivity to Api m 3, Api m 10, or both was detected in 68.0% and represented the only HBV allergen-specific IgE in 5% of the patients. Limited inhibition of IgE binding by therapeutic HBV and limited induction of Api m 3- and Api m 10-specific IgG4 in patients obtaining immunotherapy supports recent reports on the underrepresentation of these allergens in therapeutic HBV preparations. Analysis of a panel of CCD-free HBV allergens improved diagnostic sensitivity compared with use of rApi m 1 alone, identified additional major allergens, and revealed sensitizations to allergens that have been reported to be absent or underrepresented in therapeutic HBV preparations. Copyright © 2014 The Authors. Published by Mosby, Inc. All rights reserved.
Michel, Y; McIntyre, M; Ginglinger, H; Ollert, M; Cifuentes, L; Blank, S; Spillner, E
2012-01-01
Immunoglobulin (Ig) E-mediated reactions to honeybee venom can cause severe anaphylaxis, sometimes with fatal consequences. Detailed knowledge of the allergic potential of all venom components is necessary to ensure proper diagnosis and treatment of allergy and to gain a better understanding of the allergological mechanisms of insect venoms. Our objective was to undertake an immunochemical and structural evaluation of the putative low-molecular-weight serine protease inhibitor Api m 6, a component of honeybee venom. We recombinantly produced Api m 6 as a soluble protein in Escherichia coli and in Spodoptera frugiperda (Sf9) insect cells.We also assessed specific IgE reactivity of venom-sensitized patients with 2 prokaryotically produced Api m 6 variants using enzyme-linked immunosorbent assay. Moreover, we built a structural model ofApi m 6 and compared it with other protease inhibitor structures to gain insights into the function of Api m 6. In a population of 31 honeybee venom-allergic patients, 26% showed specific IgE reactivity with prokaryotically produced Api m 6, showing it to be a minor but relevant allergen. Molecular modeling of Api m 6 revealed a typical fold of canonical protease inhibitors, supporting the putative function of this venom allergen. Although Api m 6 has a highly variant surface charge, its epitope distribution appears to be similar to that of related proteins. Api m 6 is a honeybee venom component with IgE-sensitizing potential in a fraction of venom-allergic patients. Recombinant Api m 6 can help elucidate individual component-resolved reactivity profiles and increase our understanding of immune responses to low-molecular-weight allergens
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-09
... depend upon the Application Programming Interface (``API'') a Permit Holder is using.\\4\\ Currently, the Exchange offers two APIs: CBOE Market Interface (``CMi'') API and Financial Information eXchange (``FIX... available APIs, and if applicable, which version, it would like to use. \\4\\ An API is a computer interface...
2013-01-01
Background Alpha-1 proteinase inhibitor (API) is a plasma serpin superfamily member that inhibits neutrophil elastase; variant API M358R inhibits thrombin and activated protein C (APC). Fusing residues 1-75 of another serpin, heparin cofactor II (HCII), to API M358R (in HAPI M358R) was previously shown to accelerate thrombin inhibition over API M358R by conferring thrombin exosite 1 binding properties. We hypothesized that replacing HCII 1-75 region with the 13 C-terminal residues (triskaidecapeptide) of hirudin variant 3 (HV354-66) would further enhance the inhibitory potency of API M358R fusion proteins. We therefore expressed HV3API M358R (HV354-66 fused to API M358R) and HV3API RCL5 (HV354-66 fused to API F352A/L353V/E354V/A355I/I356A/I460L/M358R) API M358R) as N-terminally hexahistidine-tagged polypeptides in E. coli. Results HV3API M358R inhibited thrombin 3.3-fold more rapidly than API M358R; for HV3API RCL5 the rate enhancement was 1.9-fold versus API RCL5; neither protein inhibited thrombin as rapidly as HAPI M358R. While the thrombin/Activated Protein C rate constant ratio was 77-fold higher for HV3API RCL5 than for HV3API M358R, most of the increased specificity derived from the API F352A/L353V/E354V/A355I/I356A/I460L API RCL 5 mutations, since API RCL5 remained 3-fold more specific than HV3API RCL5. An HV3 54-66 peptide doubled the Thrombin Clotting Time (TCT) and halved the binding of thrombin to immobilized HCII 1-75 at lower concentrations than free HCII 1-75. HV3API RCL5 bound active site-inhibited FPR-chloromethyl ketone-thrombin more effectively than HAPI RCL5. Transferring the position of the fused HV3 triskaidecapeptide to the C-terminus of API M358R decreased the rate of thrombin inhibition relative to that mediated by HV3API M358R by 11-to 14-fold. Conclusions Fusing the C-terminal triskaidecapeptide of HV3 to API M358R-containing serpins significantly increased their effectiveness as thrombin inhibitors, but the enhancement was less than that seen in HCII 1-75–API M358R fusion proteins. HCII 1-75 was a superior fusion partner, in spite of the greater affinity of the HV3 triskaidecapeptide, manifested both in isolated and API-fused form, for thrombin exosite 1. Our results suggest that HCII 1-75 binds thrombin exosite 1 and orients the attached serpin scaffold for more efficient interaction with the active site of thrombin than the HV3 triskaidecapeptide. PMID:24215622
Rapid identification of antibiotic-resistant corynebacteria with the API 20S system.
Kelly, M C; Smith, I D; Anstey, R J; Thornley, J H; Rennie, R P
1984-01-01
The API 20S system (Analytab Products, Plainview, N.Y.) was evaluated for the rapid identification of multiply antibiotic-resistant aerobic diphtheroids. Sixty-eight clinical isolates of multiply resistant Centers for Disease Control group JK and group D2 corynebacteria had API 20S profiles which were clearly different from those of a number of strains of other Corynebacterium species which were tested. The API 20S system allowed more rapid identification of antibiotic-resistant diphtheroids than conventional biochemical tests. Its use for corynebacteria other than group JK and group D2 is not recommended at this time. PMID:6699150
Identification of clinical yeasts by Vitek MS system compared with API ID 32 C.
Durán-Valle, M Teresa; Sanz-Rodríguez, Nuria; Muñoz-Paraíso, Carmen; Almagro-Moltó, María; Gómez-Garcés, José Luis
2014-05-01
We performed a clinical evaluation of the Vitek MS matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) system with the commercial database version 2.0 for rapid identification of medically important yeasts as compared with the conventional phenotypic method API ID 32 C. We tested 161 clinical isolates, nine isolates from culture collections and five reference strains. In case of discrepant results or no identification with one or both methods, molecular identification techniques were employed. Concordance between both methods was observed with 160/175 isolates (91.42%) and misidentifications by both systems occurred only when taxa were not included in the respective databases, i.e., one isolate of Candida etchellsii was identified as C. globosa by Vitek MS and two isolates of C. orthopsilosis were identified as C. parapsilosis by API ID 32 C. Vitek MS could not identify nine strains (5.14%) and API ID 32 C did not identify 13 (7.42%). Vitek MS was more reliable than API ID 32 C and reduced the time required for the identification of clinical isolates to only a few minutes.
Blank, S; Seismann, H; Michel, Y; McIntyre, M; Cifuentes, L; Braren, I; Grunwald, T; Darsow, U; Ring, J; Bredehorst, R; Ollert, M; Spillner, E
2011-10-01
Generalized systemic reactions to stinging hymenoptera venom constitute a potentially fatal condition in venom-allergic individuals. Hence, the identification and characterization of all allergens is imperative for improvement of diagnosis and design of effective immunotherapeutic approaches. Our aim was the immunochemical characterization of the carbohydrate-rich protein Api m 10, an Apis mellifera venom component and putative allergen, with focus on the relevance of glycosylation. Furthermore, the presence of Api m 10 in honeybee venom (HBV) and licensed venom immunotherapy preparations was addressed. Api m 10 was produced as soluble, aglycosylated protein in Escherichia coli and as differentially glycosylated protein providing a varying degree of fucosylation in insect cells. IgE reactivity and basophil activation of allergic patients were analyzed. For detection of Api m 10 in different venom preparations, a monoclonal human IgE antibody was generated. Both, the aglycosylated and the glycosylated variant of Api m 10 devoid of cross-reactive carbohydrate determinants (CCD), exhibited IgE reactivity with approximately 50% of HBV-sensitized patients. A corresponding reactivity could be documented for the activation of basophils. Although the detection of the native protein in crude HBV suggested content comparable to other relevant allergens, three therapeutical HBV extracts lacked detectable amounts of this component. Api m 10 is a genuine allergen of A. mellifera venom with IgE sensitizing potential in a significant fraction of allergic patients independent of CCD reactivity. Thus, Api m 10 could become a key element for component-resolved diagnostic tests and improved immunotherapeutic approaches in hymenoptera venom allergy. © 2011 John Wiley & Sons A/S.
Teng, L J; Luh, K T; Ho, S W
1985-11-01
Species identifications of 71 strains of viridans streptococci isolated from blood and 4 reference strains were made by the API 20 STREP system (API system S. A., Montalieu-Vercien, France) and the conventional method. There are high levels of agreement between results obtained with the both methods for determining acidification from carbohydrate except inulin. The API 20 STREP system correctly identified 74.7% of the viridans streptococci with 9.3% low descrimination, 12% incorrect and 4% unidentified. All strains of S. mitis, S. mutans, S. salivarius and S. anginosus-constellatus were correctly identified. The correct identification rates for S. sanguis I, S. sanguis II and S. MG-intermedius were 88.9%, 68% and 61% respectively. The difference of inulin reaction and the taxonomy discrepancy may be the cause of different identification. The study indicates that the API 20 STREP system has a good potentiality for species identification of viridans streptococci at present time, however, further refinement in needed.
Wu, Qing; Zhao, Xinhua; Yu, Qing; Li, Jun
2008-07-01
To understand the corrosion of different material water supply pipelines and bacterium in drinking water and biofilms. A pilot distribution network was built and water quality detection was made on popular pipelines of galvanized iron pipe, PPR and ABS plastic pipes by ESEM (environmental scanning electron microscopy). Bacterium in drinking water and biofilms were identified by API Bacteria Identification System 10s and 20E (Biomerieux, France), and pathogenicity of bacterium were estimated. Galvanized zinc pipes were seriously corroded; there were thin layers on inner face of PPR and ABS plastic pipes. 10 bacterium (got from water samples) were identified by API10S, in which 7 bacterium were opportunistic pathogens. 21 bacterium (got from water and biofilms samples) were identified by API20E, in which 5 bacterium were pathogens and 11 bacterium were opportunistic pathogens and 5 bacteria were not reported for their pathogenicities to human beings. The bacterial water quality of drinking water distribution networks were not good. Most bacterium in drinking water and biofilms on the inner face of pipeline of the drinking water distribution network were opportunistic pathogens, it could cause serious water supply accident, if bacteria spread in suitable conditions. In the aspect of pipe material, old pipelines should be changed by new material pipes.
Tokajian, S; Hashwa, F
2004-02-01
Antibiotic-resistant bacteria were common in samples collected from an intermittent water distribution system in Lebanon. Multiply-resistant isolates were also present and most commonly to amoxycillin, cephalexin and sulfamethoxazole/trimethoprim. The aminoglycosides (amikacin, gentamicin and kanamycin) were the most effective, with almost all tested strains showing susceptibility to these antimicrobial agents. Both the Biolog GN MicroPlates and the API 20E strips can be used for the identification of coliform bacteria isolated from potable water, but the outcome of the identification should be viewed with caution. 51% of isolates were assigned similar identities by both the Biolog MicroPlates and the API 20E strips. The similarity at the species level was lower (33%) compared to that at the genus level (67%). The identification of Escherichia coli strains, which represented 30% of all tested organisms, showed 95% similarity in the assigned genus and species using both identification schemes.
Magnetic Material Arrangement In Apis Mellifera Abdomens
2002-04-01
UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP014406 TITLE: Magnetic Material Arrangement In Apis Mellifera Abdomens...Magnetic Material Arrangement In Apis Mellifera Abdomens Darci M. S. Esquivel, Eliane Wajnberg, Geraldo R. Cernicchiaro, Daniel Acosta-Avalos’ and B.E...transition (52 K- 91 K). Hysteresis curves of Apis mellifera abdomens organized parallel and perpendicular to the applied magnetic field were obtained
Van Vaerenbergh, Matthias; De Smet, Lina; Rafei-Shamsabadi, David; Blank, Simon; Spillner, Edzard; Ebo, Didier G; Devreese, Bart; Jakob, Thilo; de Graaf, Dirk C
2015-02-01
Api m 10 has recently been established as novel major allergen that is recognized by more than 60% of honeybee venom (HBV) allergic patients. Previous studies suggest Api m 10 protein heterogeneity which may have implications for diagnosis and immunotherapy of HBV allergy. In the present study, RT-PCR revealed the expression of at least nine additional Api m 10 transcript isoforms by the venom glands. Two distinct mechanisms are responsible for the generation of these isoforms: while the previously known variant 2 is produced by an alternative splicing event, novel identified isoforms are intragenic chimeric transcripts. To the best of our knowledge, this is the first report of the identification of chimeric transcripts generated by the honeybee. By a retrospective proteomic analysis we found evidence for the presence of several of these isoforms in the venom proteome. Additionally, we analyzed IgE reactivity to different isoforms by protein array technology using sera from HBV allergic patients, which revealed that IgE recognition of Api m 10 is both isoform- and patient-specific. While it was previously demonstrated that the majority of HBV allergic patients display IgE reactivity to variant 2, our study also shows that some patients lacking IgE antibodies for variant 2 display IgE reactivity to two of the novel identified Api m 10 variants, i.e. variants 3 and 4. Copyright © 2014 Elsevier Ltd. All rights reserved.
Oldenkamp, Rik; Huijbregts, Mark A J; Ragas, Ad M J
2016-05-01
The selection of priority APIs (Active Pharmaceutical Ingredients) can benefit from a spatially explicit approach, since an API might exceed the threshold of environmental concern in one location, while staying below that same threshold in another. However, such a spatially explicit approach is relatively data intensive and subject to parameter uncertainty due to limited data. This raises the question to what extent a spatially explicit approach for the environmental prioritisation of APIs remains worthwhile when accounting for uncertainty in parameter settings. We show here that the inclusion of spatially explicit information enables a more efficient environmental prioritisation of APIs in Europe, compared with a non-spatial EU-wide approach, also under uncertain conditions. In a case study with nine antibiotics, uncertainty distributions of the PAF (Potentially Affected Fraction) of aquatic species were calculated in 100∗100km(2) environmental grid cells throughout Europe, and used for the selection of priority APIs. Two APIs have median PAF values that exceed a threshold PAF of 1% in at least one environmental grid cell in Europe, i.e., oxytetracycline and erythromycin. At a tenfold lower threshold PAF (i.e., 0.1%), two additional APIs would be selected, i.e., cefuroxime and ciprofloxacin. However, in 94% of the environmental grid cells in Europe, no APIs exceed either of the thresholds. This illustrates the advantage of following a location-specific approach in the prioritisation of APIs. This added value remains when accounting for uncertainty in parameter settings, i.e., if the 95th percentile of the PAF instead of its median value is compared with the threshold. In 96% of the environmental grid cells, the location-specific approach still enables a reduction of the selection of priority APIs of at least 50%, compared with a EU-wide prioritisation. Copyright © 2016 Elsevier Ltd. All rights reserved.
Validation of the Abdominal Pain Index using a revised scoring method.
Laird, Kelsey T; Sherman, Amanda L; Smith, Craig A; Walker, Lynn S
2015-06-01
Evaluate the psychometric properties of child- and parent-report versions of the four-item Abdominal Pain Index (API) in children with functional abdominal pain (FAP) and healthy controls, using a revised scoring method that facilitates comparisons of scores across samples and time. Pediatric patients aged 8-18 years with FAP and controls completed the API at baseline (N = 1,967); a subset of their parents (N = 290) completed the API regarding the child's pain. Subsets of patients completed follow-up assessments at 2 weeks (N = 231), 3 months (N = 330), and 6 months (N = 107). Subsets of both patients (N = 389) and healthy controls (N = 172) completed a long-term follow-up assessment (mean age at follow-up = 20.21 years, SD = 3.75). The API demonstrated good concurrent, discriminant, and construct validity, as well as good internal consistency. We conclude that the API, using the revised scoring method, is a useful, reliable, and valid measure of abdominal pain severity. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
pH and Heat Resistance of the Major Celery Allergen Api g 1.
Rib-Schmidt, Carina; Riedl, Philipp; Meisinger, Veronika; Schwaben, Luisa; Schulenborg, Thomas; Reuter, Andreas; Schiller, Dirk; Seutter von Loetzen, Christian; Rösch, Paul
2018-05-25
The major celery allergen Api g 1 is a member of the pathogenesis-related 10 class protein family. Here we aimed to investigate the impact of heat and pH on the native protein conformation required for Immunoglobulin E (IgE) recognition. Spectroscopic methods, MS and IgE binding analyses were used to study the effects of pH and thermal treatment on Api g 1.0101. Heat processing results in a loss of the native protein fold via denaturation, oligomerisation and precipitation along with a subsequent reduction of IgE recognition. The induced effects and timescales are strongly pH depended. While Api g 1 refolds partially into an IgE-binding conformation at physiological pH, acidic pH treatment leads to the formation of structurally heat resistant, IgE-reactive oligomers. Thermal processing in the presence of a celery matrix or at pH conditions close to the isoelectric point (pI = 4.63) of Api g 1.0101 results in almost instant precipitation. Our data demonstrate that Api g 1.0101 is not intrinsically susceptible to heat treatment in vitro. However, the pH and the celery matrix strongly influence the stability of Api g 1.0101 and might be the main reasons for the observed temperature lability of this important food allergen. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
Wadlin, Jill K.; Hanko, Gayle; Stewart, Rebecca; Pape, John; Nachamkin, Irving
1999-01-01
We evaluated three commercial systems (RapID Yeast Plus System; Innovative Diagnostic Systems, Norcross, Ga.; API 20C Aux; bioMerieux-Vitek, Hazelwood, Mo.; and Vitek Yeast Biochemical Card, bioMerieux-Vitek) against an auxinographic and microscopic morphologic reference method for the ability to identify yeasts commonly isolated in our clinical microbiology laboratory. Two-hundred one yeast isolates were compared in the study. The RapID Yeast Plus System was significantly better than either API 20C Aux (193 versus 167 correct identifications; P < 0.0001) or the Vitek Yeast Biochemical Card (193 versus 173 correct identifications; P = 0.003) for obtaining correct identifications to the species level without additional testing. There was no significant difference between results obtained with API 20C Aux and the Vitek Yeast Biochemical Card system (P = 0.39). The API 20C Aux system did not correctly identify any of the Candida krusei isolates (n = 23) without supplemental testing and accounted for the major differences between the API 20C Aux and RapID Yeast Plus systems. Overall, the RapID Yeast Plus System was easy to use and is a good system for the routine identification of clinically relevant yeasts. PMID:10325356
Faulhammer, E; Zellnitz, S; Wutscher, T; Stranzinger, S; Zimmer, A; Paudel, A
2018-01-30
This study investigates engineered carrier, as well as engineered API particles, and shows that there are distinct performance indicators of particle engineering for carrier-based dry powder inhalers (DPIs). Spray dried (SDSS) and jet-milled (JMSS) salbutamol sulphate (SS) was blended with untreated α-lactose monohydrate (LAC_R) and α-lactose monohydrate engineered (LAC_E). Subsequent capsule filling was performed with different process settings on a dosator nozzle capsule filling machine in order to reach a target fill weight of 20-25 mg. To evaluate the performance of the different mixtures, in vitro lung deposition experiments were carried out with a next generation impactor, the emitted dose (ED) and fine particle fraction (FPF) were calculated based on the specification of the European pharmacopoeia. The FPF of micronised powder blends is significantly higher (20%) compared to the FPF of spray dried blends (5%). Compared to API engineering, carrier engineering had a positive effect on the capsule filling performance (weight variability and mean fill weight) at lower compression ratios (setting 1). Results further showed that higher compression ratios appear to be beneficial in terms of capsule filling performance (higher fill weight and less fill weight variation). Concluding, it can be stated that the carrier engineering, or generally carrier properties, govern downstream processing, whereas the API engineering and API properties govern the aerosolisation performance and thereby significantly affect the dose delivery to the lungs. Copyright © 2017 Elsevier B.V. All rights reserved.
Guinebretiere, M H; Berge, O; Normand, P; Morris, C; Carlin, F; Nguyen-The, C
2001-10-01
One hundred nineteen isolates from a commercial zucchini purée stored at 4, 10, and 20 to 25 degrees C were fingerprinted using repetitive sequence-based PCR (REP-PCR) and classified into 35 REP types. One representative isolate of each REP type was subsequently identified by API50CHB/20E profile and partial rrs gene sequence analysis. Nine REP types were misidentified by the API system. Strains were misidentified as being in the Bacillus circulans (group 2) API taxon or in taxa with a low number of positive API characters such as Brevibacillus brevis. A phylogenetic analysis pointed to one new species of Bacillus and three new species of Paenibacillus among the misidentified REP types. Bacterial components in zucchini purée were compared phenotypically with those obtained in previous work on broccoli, carrot, leek, potato, and split pea purées, based on simple matching coefficient and unweighted pair group method with averages cluster analysis. Out of 254 strains, 69 strains previously identified as B. circulans (group 2) or B. circulans/B. macerans/B. polymyxa were assigned to a new Paenibacillus taxon phylogenetically related to P. azotofixans. Storage conditions at 4 degrees C favored the development of "B. macroides/B. maroccanus" and Paenibacillus spp. in zucchini purées and Paenibacillus spp. in other purées. Storage conditions at 20 to 25 degrees C favored the development of B. subtilis group (B. licheniformis and B. subtilis) and B. cereus group strains. At 10 degrees C, Paenibacillus spp. were always present at high frequencies, whereas the occurrence of B. macroides/B. maroccanus (in zucchini purées), B. cereus, and B. pumilus varied with the experiment.
Guinebretiere, Marie-Hélène; Berge, Odile; Normand, Philippe; Morris, Cindy; Carlin, Frédéric; Nguyen-The, Christophe
2001-01-01
One hundred nineteen isolates from a commercial zucchini purée stored at 4, 10, and 20 to 25°C were fingerprinted using repetitive sequence-based PCR (REP-PCR) and classified into 35 REP types. One representative isolate of each REP type was subsequently identified by API50CHB/20E profile and partial rrs gene sequence analysis. Nine REP types were misidentified by the API system. Strains were misidentified as being in the Bacillus circulans (group 2) API taxon or in taxa with a low number of positive API characters such as Brevibacillus brevis. A phylogenetic analysis pointed to one new species of Bacillus and three new species of Paenibacillus among the misidentified REP types. Bacterial components in zucchini purée were compared phenotypically with those obtained in previous work on broccoli, carrot, leek, potato, and split pea purées, based on simple matching coefficient and unweighted pair group method with averages cluster analysis. Out of 254 strains, 69 strains previously identified as B. circulans (group 2) or B. circulans/B. macerans/B. polymyxa were assigned to a new Paenibacillus taxon phylogenetically related to P. azotofixans. Storage conditions at 4°C favored the development of “B. macroides/B. maroccanus” and Paenibacillus spp. in zucchini purées and Paenibacillus spp. in other purées. Storage conditions at 20 to 25°C favored the development of B. subtilis group (B. licheniformis and B. subtilis) and B. cereus group strains. At 10°C, Paenibacillus spp. were always present at high frequencies, whereas the occurrence of B. macroides/B. maroccanus (in zucchini purées), B. cereus, and B. pumilus varied with the experiment. PMID:11571151
Experience API: Flexible, Decentralized and Activity-Centric Data Collection
ERIC Educational Resources Information Center
Kevan, Jonathan M.; Ryan, Paul R.
2016-01-01
This emerging technology report describes the Experience API (xAPI), a new e-learning specification designed to support the learning community in standardizing and collecting both formal and informal distributed learning activities. Informed by Activity Theory, a framework aligned with constructivism, data is collected in the form of activity…
Oruba, Z; Pac, A; Olszewska-Czyż, I; Chomyszyn-Gajewska, M
2014-09-01
Motivation plays an important role in the treatment process of chronic diseases, as treatment requires behavioural change and lifelong adherence to medical recommendations. Periodontitis is a good example of such health condition as to maintain good periodontal health patients have to adhere to a strict oral hygiene regimen. To examine whether the motivation of patients suffering from chronic periodontitis influences their clinical periodontal condition. Cross sectional study. Department of Periodontology and Oral Medicine, Dental University Clinic, Jagiellonian University, Krakow, Poland. 199 adult periodontal patients, aged 20-78 years. Questionnaire concerning patients' medical and dental history, modified Zychlińscy motivation assessment questionnaire, clinical periodontal examination. The extent of motivation. Periodontal status evaluated with the use of periodontal indices (API, BOP, CPITN). The mean motivation score was 57.4. The mean API and BOP values were 55.7% and 46.4%, respectively. For most of the patients the recorded CPITN value was 3. Correlations were observed between motivation and both API and BOP, and between API and BOP. Periodontal patients with greater motivation having better oral health (lower API and BOP) suggests an influence on the quality of their self-management of the disease (i.e. adherence to their oral hygiene regimen).
Zhang, Shuang; Yao, Feng; Jing, Ting; Zhang, Mengchen; Zhao, Wei; Zou, Xiangyang; Sui, Linlin; Hou, Lin
2017-09-10
During the embryonic development of Artemia sinica, the diapause phenomenon can be induced by high salinity or low temperature conditions. The diapause embryo at the gastrula stage is maintained under the threat of apoptosis to guarantee the embryo's normal development. In this process, apoptosis inhibitor proteins play vital roles in protecting embryos against apoptosis. Apoptosis inhibitor5 (API5) plays a pivotal role in regulating the cell cycle and preventing programmed cell death after growth factor starvation. In the present study, we cloned the full-length cDNA representing the api5 gene from A. sinica (As-api5), which encodes a 372-amino acid protein. In situ hybridization experiments revealed that As-api5 expression is not tissue or organ specific. Quantitative real-time PCR analyses of the developmental expression of As-api5 showed that it reached its highest level at 10h, after which its expression decreased. High salinity and low temperature treatments increased the expression of As-api5. Western blotting was used to assess the abundance of As-API5 and related proteins (As-CyclinA, As-CyclinE, As-E2F1, As-CDK2, As-APAF1, and As-Caspase9). Downregulation of As-api5 expression using a short interfering RNA resulted in increased mortality and embryo malformation of A. sinica. Taken together, the results indicated that API5 plays a crucial role in embryonic diapause termination and early embryo development of A. sinica. Copyright © 2017. Published by Elsevier B.V.
Šelb, J; Kogovšek, R; Šilar, M; Košnik, M; Korošec, P
2016-04-01
No study has assessed the diagnostic sensitivity of rApi m 1 and rVes v 5 on Immulite testing system. To compare the diagnostic sensitivity of commercially available venom recombinant allergens between the currently available immunoassays [ImmunoCAP (CAP) and Immulite (LITE)] and establish their correlation with the severity of the sting reaction. This study evaluated 95 bee venom and 110 yellow jacket venom-allergic subjects. We measured the levels of sIgE to rApi m 1, rVes v 5 (LITE and CAP), rApi m 2 (LITE), rVes v 1 (CAP) and total IgE (CAP). Forty-nine healthy subjects served as controls. The diagnostic sensitivity of rApi m 1 and rVes v 5 was significantly higher with the LITE than with the CAP system (71% vs. 88% and 82% vs. 93%). The specificity of both assays for both allergens was between 94% and 98%. Twenty-nine patients that tested negative for rApi m 1 or rVes v 5 with CAP were positive with LITE, but none of the patients that tested negative with LITE were positive with CAP. The positive values of rApi m 1 and rVes v 5 were on average 2.7 and 2.3 times higher, with the LITE than with the CAP system. The combination of rApi m 1 and rApi m 2 (LITE) and the combination of rVes v 5 (LITE) and rVes v 1 (CAP) almost matched the sensitivity of native venoms (95% and 97%, respectively), whereas the diagnostic sensitivity of the combination of rVes v 5 and rVes v 1 (CAP) did not reach the sensitivity of rVes v 5 (LITE) alone (90% vs. 93%). IgE levels to venom recombinants and total IgE did not correlate with the severity of sting reaction. The use of rApi m 1 and rVes v 5 with the LITE system significantly enhanced diagnostic utility of venom recombinants and should improve the dissection of bee and yellow jacket venom allergy. © 2015 John Wiley & Sons Ltd.
Recombinant allergen-based IgE testing to distinguish bee and wasp allergy.
Mittermann, Irene; Zidarn, Mihaela; Silar, Mira; Markovic-Housley, Zora; Aberer, Werner; Korosec, Peter; Kosnik, Mitja; Valenta, Rudolf
2010-06-01
The identification of the disease-causing insect in venom allergy is often difficult. To establish recombinant allergen-based IgE tests to diagnose bee and yellow jacket wasp allergy. Sera from patients with bee and/or wasp allergy (n = 43) and patients with pollen allergy with false-positive IgE serology to venom extracts were tested for IgE reactivity in allergen extract-based tests or with purified allergens, including nonglycosylated Escherichia coli-expressed recombinant (r) Api m 1, rApi m 2, rVes v 5, and insect cell-expressed, glycosylated rApi m 2 as well as 2 natural plant glycoproteins (Phl p 4, bromelain). The patients with venom allergy could be diagnosed with a combination of E coli-expressed rApi m 1, rApi m 2, and rVes v 5 whereas patients with pollen allergy remained negative. For a group of 29 patients for whom the sensitizing venom could not be identified with natural allergen extracts, testing with nonglycosylated allergens allowed identification of the sensitizing venom. Recombinant nonglycosylated allergens also allowed definition of the sensitizing venom for those 14 patients who had reacted either with bee or wasp venom extracts. By IgE inhibition studies, it is shown that glycosylated Api m 2 contains carbohydrate epitopes that cross-react with natural Api m 1, Ves v 2, natural Phl p 4, and bromelain, thus identifying cross-reactive structures responsible for serologic false-positive test results or double-positivity to bee and wasp extracts. Nonglycosylated recombinant bee and wasp venom allergens allow the identification of patients with bee and wasp allergy and should facilitate accurate prescription of venom immunotherapy. Copyright (c) 2010 American Academy of Allergy, Asthma & Immunology. Published by Mosby, Inc. All rights reserved.
Artificial periodic irregularities in the high-latitude ionosphere excited by the HAARP facility
NASA Astrophysics Data System (ADS)
Bakhmetieva, N. V.; Grach, S. M.; Sergeev, E. N.; Shindin, A. V.; Milikh, G. M.; Siefring, C. L.; Bernhardt, P. A.; McCarrick, M.
2016-07-01
We present results of the new observations of artificial periodic irregularities (APIs) in the ionosphere using the High Frequency Active Auroral Research Program (HAARP) heating facility carried out in late May and early June 2014.The objective of this work is to detect API using high-latitude facility and analyze possible differences of the temporal and spatial variations of the API echoes in the high (HAARP) and middle (Sura) latitudes. Irregularities were created by the powerful wave of X mode and were sounded using the short probing pulses signals of X mode. API echoes were observed in the D, E, and F regions of the ionosphere. Amplitudes and characteristic times of the API echoes were measured. The API growth and decay times at HAARP (high latitudes) observed were similar to those at the Sura heating facility (midlatitudes).
Vejvar, Eva; Himly, Martin; Briza, Peter; Eichhorn, Stephanie; Ebner, Christof; Hemmer, Wolfgang; Ferreira, Fatima; Gadermaier, Gabriele
2013-11-01
Apium graveolens represents a relevant food allergen source linked with severe systemic reactions. We sought to identify an IgE-binding nonspecific lipid transfer protein (nsLTP) in celery tuber. A low molecular weight protein exclusively present in celery tuber was purified and designated Api g 6. The entire protein sequence was obtained by MS and classified as member of the nsLTP2 family. Api g 6 is monomeric in solution with a molecular mass of 6936 Da. The alpha-helical disulfide bond-stabilized structure confers tremendous thermal stability (Tm > 90°C) and high resistance to gastrointestinal digestion. Endolysosomal degradation demonstrated low susceptibility and the presence of a dominant peptide cluster at the C-terminus. Thirty-eight percent of A. graveolens allergic patients demonstrated IgE reactivity to purified natural Api g 6 in ELISA and heat treatment did only partially reduce its allergenic activity. No correlation in IgE binding and limited cross-reactivity was observed with Api g 2 and Art v 3, nsLTP1 from celery stalks and mugwort pollen. Api g 6, a novel nsLTP2 from celery tuber represents the first well-characterized allergen in this protein family. Despite similar structural and physicochemical features as nsLTP1, immunological properties of Api g 6 are distinct which warrants its inclusion in molecule-based diagnosis of A. graveolens allergy. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-23
...; API 5L Grades A & B....... Two--HSLA & HSLA-F Quality Grades: A572, A1011-HSLAS; A1018-HSLAS, A1011-HSLAS- $661.92 F; A1018-HSLAS-F; API 5L Gr. X42, X46, X52, X56, X60; API 5CT Grades J55 and K55 Three--High Grade Coils and Sheets for Pipes and Casings API 5L Gr. X65, X70, and X80 $770.24 Section III.E is...
Mayank, A K; Sharma, S; Nailwal, H; Lal, S K
2015-12-17
Apoptosis of host cells profoundly influences virus propagation and dissemination, events that are integral to influenza A virus (IAV) pathogenesis. The trigger for activation of apoptosis is regulated by an intricate interplay between cellular and viral proteins, with a strong bearing on IAV replication. Though the knowledge of viral proteins and mechanisms employed by IAV to induce apoptosis has advanced considerably of late, we know relatively little about the repertoire of host factors targeted by viral proteins. Thus, identification of cellular proteins that are hijacked by the virus will help us not only to understand the molecular underpinnings of IAV-induced apoptosis, but also to design future antiviral therapies. Here we show that the nucleoprotein (NP) of IAV directly interacts with and suppresses the expression of API5, a host antiapoptotic protein that antagonizes E2F1-dependent apoptosis. siRNA-mediated depletion of API5, in NP-overexpressed as well as IAV-infected cells, leads to upregulation of apoptotic protease activating factor 1 (APAF1), a downstream modulator of E2F1-mediated apoptosis, and cleavage of caspases 9 and 3, although a reciprocal pattern of these events was observed on ectopic overexpression of API5. In concordance with these observations, annexin V and 7AAD staining assays exhibit downregulation of early and late apoptosis in IAV-infected or NP-transfected cells on overexpression of API5. Most significantly, while overexpression of API5 decreases viral titers, cellular NP protein as well as mRNA levels in IAV-infected A549 cells, silencing of API5 expression causes a steep rise in the same parameters. From the data reported in this manuscript, we propose a proapoptotic role for NP in IAV pathogenesis, whereby it suppresses expression of antiapoptotic factor API5, thus potentiating the E2F1-dependent apoptotic pathway and ensuring viral replication.
Thaochan, N.; Drew, R. A. I.; Hughes, J. M.; Vijaysegaran, S.; Chinajariyawong, A.
2010-01-01
Bacteria were isolated from the crop and midgut of field collected Bactrocera cacuminata (Hering) and Bactrocera tryoni (Froggatt) (Diptera: Tephritidae). Two methods were used, firstly isolation onto two types of bacteriological culture media (PYEA and TSA) and identification using the API-20E diagnostic kit, and secondly, analysis of samples using the 16S rRNA gene molecular diagnostic method. Using the API-20E method, 10 genera and 17 species of bacteria in the family Enterobacteriaceae were identified from cultures growing on the nutrient agar. The dominant species in both the crop and midgut were Citrobacter freundii, Enterobacter cloacae and Klebsiella oxytoca. Providencia rettgeri, Klebsiella pneumoniae ssp ozaenae and Serratia marcescens were isolated from B. tryoni only. Using the molecular cloning technique that is based on 16S rRNA gene sequences, five bacteria classes were dignosed — Alpha-, Beta-, Gamma- and Delta- Proteobacteria and Firmicutes — including five families, Leuconostocaceae, Enterococcaceae, Acetobacteriaceae, Comamonadaceae and Enterobacteriaceae. The bacteria affiliated with Firmicutes were found mainly in the crop while the Gammaproteobacteria, especially the family Enterobacteriaceae, was dominant in the midgut. This paper presents results from the first known application of molecular cloning techniques to study bacteria within tephritid species and the first record of Firmicutes bacteria in these flies. PMID:20883132
Mickle, Travis C; Guenther, Sven M; Barrett, Andrew C; Roupe, Kathryn Ann; Zhou, Jing; Dickerson, Daniel; Webster, Lynn R
2017-10-28
Developing an acetaminophen-free, immediate-release hydrocodone product remains an unmet medical need; however, new opioid analgesics should not introduce new abuse risks. Benzhydrocodone is a prodrug of hydrocodone that must be metabolized into hydrocodone by enzymes in the intestinal tract to optimally deliver its pharmacologic effects. This study evaluated the intranasal pharmacokinetics and abuse potential of benzhydrocodone active pharmaceutical ingredient (API) compared with hydrocodone bitartrate (HB) API. Single-center, randomized, double-blind, crossover study. Clinical research site. Healthy adult, nondependent, recreational opioid users. Subjects (N = 51 Completers) were randomized to receive 13.34 mg of intranasal benzhydrocodone API and 15.0 mg of intranasal HB API (molar-equivalent doses of hydrocodone). Blood samples were taken, and Drug Liking scores (assessed on a bipolar visual analog scale) were obtained throughout each dosing interval. Nasal irritation and safety were assessed. Peak hydrocodone plasma concentration (Cmax) was 36.0% lower, and total hydrocodone exposures (AUClast and AUCinf) were 20.3% and 19.5% lower, respectively, for benzhydrocodone API compared with HB API (P < 0.0001). All partial AUC values were lower for benzhydrocodone API, with a ≥ 75% reduction in hydrocodone exposure at all time intervals up to one hour postdose (P < 0.0001). Median Tmax of hydrocodone following benzhydrocodone API was delayed by more than one hour compared with HB. Drug Liking score, as assessed by maximal liking (Emax), was significantly lower for benzhydrocodone API vs HB API (P = 0.004), with 45% of subjects showing a ≥ 30% reduction in Drug Liking Emax. Reductions in hydrocodone exposure and associated decreases in Drug Liking relative to HB suggest that the prodrug benzhydrocodone may deter intranasal abuse. © 2017 American Academy of Pain Medicine.
De Leersnyder, Fien; Peeters, Elisabeth; Djalabi, Hasna; Vanhoorne, Valérie; Van Snick, Bernd; Hong, Ke; Hammond, Stephen; Liu, Angela Yang; Ziemons, Eric; Vervaet, Chris; De Beer, Thomas
2018-03-20
A calibration model for in-line API quantification based on near infrared (NIR) spectra collection during tableting in the tablet press feed frame was developed and validated. First, the measurement set-up was optimised and the effect of filling degree of the feed frame on the NIR spectra was investigated. Secondly, a predictive API quantification model was developed and validated by calculating the accuracy profile based on the analysis results of validation experiments. Furthermore, based on the data of the accuracy profile, the measurement uncertainty was determined. Finally, the robustness of the API quantification model was evaluated. An NIR probe (SentroPAT FO) was implemented into the feed frame of a rotary tablet press (Modul™ P) to monitor physical mixtures of a model API (sodium saccharine) and excipients with two different API target concentrations: 5 and 20% (w/w). Cutting notches into the paddle wheel fingers did avoid disturbances of the NIR signal caused by the rotating paddle wheel fingers and hence allowed better and more complete feed frame monitoring. The effect of the design of the notched paddle wheel fingers was also investigated and elucidated that straight paddle wheel fingers did cause less variation in NIR signal compared to curved paddle wheel fingers. The filling degree of the feed frame was reflected in the raw NIR spectra. Several different calibration models for the prediction of the API content were developed, based on the use of single spectra or averaged spectra, and using partial least squares (PLS) regression or ratio models. These predictive models were then evaluated and validated by processing physical mixtures with different API concentrations not used in the calibration models (validation set). The β-expectation tolerance intervals were calculated for each model and for each of the validated API concentration levels (β was set at 95%). PLS models showed the best predictive performance. For each examined saccharine concentration range (i.e., between 4.5 and 6.5% and between 15 and 25%), at least 95% of future measurements will not deviate more than 15% from the true value. Copyright © 2018 Elsevier B.V. All rights reserved.
Pharmaceuticals in water, fish and osprey nestlings in Delaware River and Bay
Bean, Thomas G.; Rattner, Barnett A.; Lazarus, Rebecca S.; Day, Daniel D.; Burket, S. Rebekah; Brooks, Bryan W.; Haddad, Samuel P.; Bowerman, William W.
2018-01-01
Exposure of wildlife to Active Pharmaceutical Ingredients (APIs) is likely to occur but studies of risk are limited. One exposure pathway that has received attention is trophic transfer of APIs in a water-fish-osprey food chain. Samples of water, fish plasma and osprey plasma were collected from Delaware River and Bay, and analyzed for 21 APIs. Only 2 of 21 analytes exceeded method detection limits in osprey plasma (acetaminophen and diclofenac) with plasma levels typically 2–3 orders of magnitude below human therapeutic concentrations (HTC). We built upon a screening level model used to predict osprey exposure to APIs in Chesapeake Bay and evaluated whether exposure levels could have been predicted in Delaware Bay had we just measured concentrations in water or fish. Use of surface water and BCFs did not predict API concentrations in fish well, likely due to fish movement patterns, and partitioning and bioaccumulation uncertainties associated with these ionizable chemicals. Input of highest measured API concentration in fish plasma combined with pharmacokinetic data accurately predicted that diclofenac and acetaminophen would be the APIs most likely detected in osprey plasma. For the majority of APIs modeled, levels were not predicted to exceed 1 ng/mL or method detection limits in osprey plasma. Based on the target analytes examined, there is little evidence that APIs represent a significant risk to ospreys nesting in Delaware Bay. If an API is present in fish orders of magnitude below HTC, sampling of fish-eating birds is unlikely to be necessary. However, several human pharmaceuticals accumulated in fish plasma within a recommended safety factor for HTC. It is now important to expand the scope of diet-based API exposure modeling to include alternative exposure pathways (e.g., uptake from landfills, dumps and wastewater treatment plants) and geographic locations (developing countries) where API contamination of the environment may represent greater risk.
Milbrath, Meghan O; van Tran, Toan; Huang, Wei-Fong; Solter, Leellen F; Tarpy, David R; Lawrence, Frank; Huang, Zachary Y
2015-02-01
Honey bees (Apis mellifera) are infected by two species of microsporidia: Nosema apis and Nosemaceranae. Epidemiological evidence indicates that N. ceranae may be replacing N. apis globally in A. mellifera populations, suggesting a potential competitive advantage of N. ceranae. Mixed infections of the two species occur, and little is known about the interactions among the host and the two pathogens that have allowed N. ceranae to become dominant in most geographical areas. We demonstrated that mixed Nosema species infections negatively affected honey bee survival (median survival=15-17days) more than single species infections (median survival=21days and 20days for N. apis and N. ceranae, respectively), with median survival of control bees of 27days. We found similar rates of infection (percentage of bees with active infections after inoculation) for both species in mixed infections, with N. apis having a slightly higher rate (91% compared to 86% for N. ceranae). We observed slightly higher spore counts in bees infected with N. ceranae than in bees infected with N. apis in single microsporidia infections, especially at the midpoint of infection (day 10). Bees with mixed infections of both species had higher spore counts than bees with single infections, but spore counts in mixed infections were highly variable. We did not see a competitive advantage for N. ceranae in mixed infections; N. apis spore counts were either higher or counts were similar for both species and more N. apis spores were produced in 62% of bees inoculated with equal dosages of the two microsporidian species. N. ceranae does not, therefore, appear to have a strong within-host advantage for either infectivity or spore growth, suggesting that direct competition in these worker bee mid-guts is not responsible for its apparent replacement of N. apis. Copyright © 2014 Elsevier Inc. All rights reserved.
Petzoldt, Christine; Bley, Oliver; Byard, Stephen J; Andert, Doris; Baumgartner, Bruno; Nagel, Norbert; Tappertzhofen, Christoph; Feth, Martin Philipp
2014-04-01
The so-called pharmaceutical solid chain, which encompasses drug substance micronisation to the final tablet production, at pilot plant scale is presented as a case study for a novel, highly potent, pharmaceutical compound: SAR114137. Various solid-state analytical methods, such as solid-state Nuclear Magnetic Resonance (ssNMR), Differential Scanning Calorimetry (DSC), Dynamic Water Vapour Sorption Gravimetry (DWVSG), hot-stage Raman spectroscopy and X-ray Powder Diffraction (XRPD) were applied and evaluated to characterise and quantify amorphous content during the course of the physical treatment of crystalline active pharmaceutical ingredient (API). DSC was successfully used to monitor the changes in amorphous content during micronisation of the API, as well as during stability studies. (19)F solid-state NMR was found to be the method of choice for the detection and quantification of low levels of amorphous API, even in the final drug product (DP), since compaction during tablet manufacture was identified as a further source for the formation of amorphous API. The application of different jet milling techniques was a critical factor with respect to amorphous content formation. In the present case, the change from spiral jet milling to loop jet milling led to a decrease in amorphous API content from 20-30 w/w% to nearly 0 w/w% respectively. The use of loop jet milling also improved the processability of the API. Stability investigations on both the milled API and the DP showed a marked tendency for recrystallisation of the amorphous API content on exposure to elevated levels of relative humidity. No significant impact of amorphous API on either the chemical stability or the dissolution rate of the API in drug formulation was observed. Therefore, the presence of amorphous content in the oral formulation was of no consequence for the clinical trial phases I and II. Copyright © 2013 Elsevier B.V. All rights reserved.
Gadermaier, Gabriele; Hauser, Michael; Egger, Matthias; Ferrara, Rosetta; Briza, Peter; Santos, Keity Souza; Zennaro, Danila; Girbl, Tamara; Zuidmeer-Jongejan, Laurian; Mari, Adriano; Ferreira, Fatima
2011-01-01
Celery (Apium graveolens) represents a relevant allergen source that can elicit severe reactions in the adult population. To investigate the sensitization prevalence and cross-reactivity of Api g 2 from celery stalks in a Mediterranean population and in a mouse model. 786 non-randomized subjects from Italy were screened for IgE reactivity to rApi g 2, rArt v 3 (mugwort pollen LTP) and nPru p 3 (peach LTP) using an allergen microarray. Clinical data of 32 selected patients with reactivity to LTP under investigation were evaluated. Specific IgE titers and cross-inhibitions were performed in ELISA and allergen microarray. Balb/c mice were immunized with purified LTPs; IgG titers were determined in ELISA and mediator release was examined using RBL-2H3 cells. Simulated endolysosomal digestion was performed using microsomes obtained from human DCs. IgE testing showed a sensitization prevalence of 25.6% to Api g 2, 18.6% to Art v 3, and 28.6% to Pru p 3 and frequent co-sensitization and correlating IgE-reactivity was observed. 10/32 patients suffering from LTP-related allergy reported symptoms upon consumption of celery stalks which mainly presented as OAS. Considerable IgE cross-reactivity was observed between Api g 2, Art v 3, and Pru p 3 with varying inhibition degrees of individual patients' sera. Simulating LTP mono-sensitization in a mouse model showed development of more congruent antibody specificities between Api g 2 and Art v 3. Notably, biologically relevant murine IgE cross-reactivity was restricted to the latter and diverse from Pru p 3 epitopes. Endolysosomal processing of LTP showed generation of similar clusters, which presumably represent T-cell peptides. Api g 2 represents a relevant celery stalk allergen in the LTP-sensitized population. The molecule displays common B cell epitopes and endolysosomal peptides that encompass T cell epitopes with pollen and plant-food derived LTP.
Scala, Enrico; Pirrotta, Lia; Uasuf, Carina G; Mistrello, Gianni; Amato, Stefano; Guerra, Emma Cristina; Locanto, Maria; Meneguzzi, Giorgia; Giani, Mauro; Cecchi, Lorenzo; Abeni, Damiano; Asero, Riccardo
2018-01-01
Mosquito bite is usually followed by a local reaction, but severe or systemic reaction may, in rare cases, occur. Allergic reactions to Aedes communis (Ac) may be underestimated due to the lack of reliable diagnostic tools. In this multicenter study, 205 individuals reporting large local reactions to Ac were enrolled and studied for cutaneous or IgE reactivity to Ac, Blattella germanica, Penaeus monodon, and Dermatophagoides pteronyssinus. Extract and molecular IgE reactivity to bees, wasps, hornets, and yellow jacket venoms were also studied in 119 patients with a clinical history of adverse reaction to Hymenoptera. Immunoblot (IB) analysis and immunoCAP IgE inhibition experiments were carried out in selected sera. Ac sensitization was recorded in 96 (46.8%) patients on SPT. Strict relationship between Ac and D. pteronyssinus, B. germanica, P. monodon, or Apis mellifera reactivity on SPT was observed. Ac IgE recognition was seen in 60/131 (45.8%) patients, 49 (81.6%) of them SPT positive, and 5/14 IB reactors. Ac IgE sensitization was associated with Tabanus spp, A. mellifera, Vespula vulgaris, and Polistes dominula reactivity. A strict relationship between Ac IgE reactivity and Api m 1, Api m 2, Api m 3, Api m 5, and Api m 10 was recorded. IgE reactivity to AC was inhibited in 9/15 cases after serum absorption with the A. mellifera extract. Both SPT and IgE Ac reactivity is observed in about half of patients with a history of large local reactions to mosquito bites. The significant relationship between Ac sensitization and either extract or single bee venom components is suggestive of a "bee-mosquito syndrome" occurrence. © 2018 S. Karger AG, Basel.
ERIC Educational Resources Information Center
Geddes, Lisa H.; McQuillan, H. James; Aiken, Alastair; Vergoz, Vanina; Mercer, Alison R.
2013-01-01
Here, we examine effects of the steroid hormone, 20-hydroxyecdysone (20-E), on associative olfactory learning in the honeybee, "Apis mellifera." 20-E impaired the bees' ability to associate odors with punishment during aversive conditioning, but did not interfere with their ability to associate odors with a food reward (appetitive…
30 CFR 250.920 - What are the MMS requirements for assessment of fixed platforms?
Code of Federal Regulations, 2011 CFR
2011-07-01
.... Assessment categories are defined in API RP 2A-WSD, Section 17.3. If MMS objects to the assessment category... more restrictive level (see Sections 17.2.1 through 17.2.5 of API RP 2A-WSD for a description of... assessment process of API RP 2A-WSD. You must submit applications for your mitigation actions (e.g., repair...
Role of the Wasp Venom Peptide Mastoparan in the Study of Mechanisms Involved in Cell Death
1989-08-23
The vespid venom, unlike the honey bee ( Apis mellifera ) venom, has phospholipase B in addition to phospholipase A2 , proteases, and the peptide...Olson, F.C., D. Munjal, and A.N. Malviya. 1974. structural and respiratory effects of melittin ( apis mellifera ) on rat liver mitochondria. Toxicon...M.D. and A.R. Bridges. 1982. Catechclamines in honey bee ( Apis mellifera ) and various vespid (hymenoptera) venoms. Toxicon 20: 1075-1084. Reinert, M
Code of Federal Regulations, 2013 CFR
2013-07-01
... liquids greater than or equal to 20°API are considered “light crude.” 5 “Others” category includes... vents. 6 Hydrocarbon liquids less than 20°API are considered “heavy crude.” [77 FR 51494, Aug. 24, 2012] ...
Code of Federal Regulations, 2014 CFR
2014-07-01
... liquids greater than or equal to 20°API are considered “light crude.” 5 “Others” category includes... vents. 6 Hydrocarbon liquids less than 20°API are considered “heavy crude.” [77 FR 51494, Aug. 24, 2012] ...
Han, Xi; Ghoroi, Chinmay; Davé, Rajesh
2013-02-14
Motivated by our recent study showing improved flow and dissolution rate of the active pharmaceutical ingredient (API) powders (20 μm) produced via simultaneous micronization and surface modification through continuous fluid energy milling (FEM) process, the performance of blends and direct compacted tablets with high drug loading is examined. Performance of 50 μm API powders dry coated without micronization is also considered for comparison. Blends of micronized, non-micronized, dry coated or uncoated API powders at 30, 60 and 70% drug loading, are examined. The results show that the blends containing dry coated API powders, even micronized ones, have excellent flowability and high bulk density compared to the blends containing uncoated API, which are required for direct compaction. As the drug loading increases, the difference between dry coated and uncoated blends is more pronounced, as seen in the proposed bulk density-FFC phase map. Dry coating led to improved tablet compactibility profiles, corresponding with the improvements in blend compressibility. The most significant advantage is in tablet dissolution where for all drug loadings, the t(80) for the tablets with dry coated APIs was well under 5 min, indicating that this approach can produce nearly instant release direct compacted tablets at high drug loadings. Copyright © 2012 Elsevier B.V. All rights reserved.
Gadermaier, Gabriele; Egger, Matthias; Girbl, Tamara; Erler, Anja; Harrer, Andrea; Vejvar, Eva; Liso, Marina; Richter, Klaus; Zuidmeer, Laurian; Mari, Adriano; Ferreira, Fatima
2011-04-01
Celery represents a relevant cross-reactive food allergen source in the adult population. As the currently known allergens are not typical elicitors of severe symptoms, we aimed to identify and characterize a non-specific lipid transfer protein (nsLTP). MS and cDNA cloning were applied to obtain the full-length sequence of a novel allergenic nsLTP from celery stalks. The purified natural molecule consisted of a single isoallergen designated as Api g 2.0101, which was recombinantly produced in Escherichia coli Rosetta-gami. The natural and recombinant molecules displayed equivalent physicochemical and immunological properties. Circular dichroism revealed a typical α-helical fold and high thermal stability. Moreover, Api g 2 was highly resistant to simulated gastrointestinal digestion. As assessed by ELISA, thermal denaturation did not affect the IgE binding of Api g 2. Natural and recombinant Api g 2 showed similar allergenic activity in mediator release assays. Api g 2-specific IgE antibodies cross-reacted with peach and mugwort pollen nsLTPs. Based on our results, it can be anticipated that inclusion of recombinant Api g 2 in the current panel of allergens for molecule-based diagnosis will facilitate the evaluation of the clinical relevance of nsLTP sensitization in celery allergy and help clinicians in the management of food allergic patients. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Continuous API-crystal coating via coacervation in a tubular reactor.
Besenhard, M O; Thurnberger, A; Hohl, R; Faulhammer, E; Rattenberger, J; Khinast, J G
2014-11-20
We present a proof-of-concept study of a continuous coating process of single API crystals in a tubular reactor using coacervation as a microencapsulation technique. Continuous API crystal coating can have several advantages, as in a single step (following crystallization) individual crystals can be prepared with a functional coating, either to change the release behavior, to protect the API from gastric juice or to modify the surface energetics of the API (i.e., to tailor the hydrophobic/hydrophilic characteristics, flowability or agglomeration tendency, etc.). The coating process was developed for the microencapsulation of a lipophilic core material (ibuprofen crystals of 20 μm- to 100 μm-size), with either hypromellose phthalate (HPMCP) or Eudragit L100-55. The core material was suspended in an aqueous solution containing one of these enteric polymers, fed into the tubing and mixed continuously with a sodium sulfate solution as an antisolvent to induce coacervation. A subsequent temperature treatment was applied to optimize the microencapsulation of crystals via the polymer-rich coacervate phase. Cross-linking of the coating shell was achieved by mixing the processed material with an acidic solution (pH<3). Flow rates, temperature profiles and polymer-to-antisolvent ratios had to be tightly controlled to avoid excessive aggregation, leading to pipe plugging. This work demonstrates the potential of a tubular reactor design for continuous coating applications and is the basis for future work, combining continuous crystallization and coating. Copyright © 2014 Elsevier B.V. All rights reserved.
Code of Federal Regulations, 2013 CFR
2013-01-01
... gravity of 20.0 degrees API or lower, at an average volume not to exceed 25 MB/D, will be authorized as... that the California heavy crude oil: (i) Has a gravity of 20.0 degrees API or lower; (ii) Was produced... least 2,000 meters water depth). Exceptions can be made at the discretion of the captain only in order...
Code of Federal Regulations, 2012 CFR
2012-01-01
... gravity of 20.0 degrees API or lower, at an average volume not to exceed 25 MB/D, will be authorized as... that the California heavy crude oil: (i) Has a gravity of 20.0 degrees API or lower; (ii) Was produced... least 2,000 meters water depth). Exceptions can be made at the discretion of the captain only in order...
Code of Federal Regulations, 2014 CFR
2014-01-01
... gravity of 20.0 degrees API or lower, at an average volume not to exceed 25 MB/D, will be authorized as... that the California heavy crude oil: (i) Has a gravity of 20.0 degrees API or lower; (ii) Was produced... least 2,000 meters water depth). Exceptions can be made at the discretion of the captain only in order...
Solid state stability and solubility of triethylenetetramine dihydrochloride.
Henriet, Théo; Gana, Inès; Ghaddar, Carine; Barrio, Maria; Cartigny, Yohann; Yagoubi, Najet; Do, Bernard; Tamarit, Josep-Lluis; Rietveld, Ivo B
2016-09-10
The API triethylenetetramine dihydrochloride used as an alternative treatment of Wilson's disease is sensitive to water and it exhibits polymorphism. As this may become an issue for the drug formulation, the physical stability has been studied by differential scanning calorimetry, high-pressure thermal analysis, dynamic vapor sorption, and X-ray diffraction as a function of temperature. In addition, high-pressure liquid chromatography and mass spectrometry have been used to study the purity and chemical stability of the API. A pressure-temperature phase diagram of the pure compound has been constructed and it can be concluded that form II is monotropic in relation to form I, which is the only stable solid. The solubilities of the different solid forms have been determined with the help of a temperature - composition phase diagram. The API is very soluble, at 20° C about 10% of the saturated solution with respect to the dihydrate consists of API and the solubility of the pure form I is twice as high. Moreover, it has been shown that at 20°C, a relative humidity above 40% induces the formation of the dihydrate and at 70% a saturated solution appears. At higher temperatures, the formation of the dihydrate appears at lower relative humidity values. A clear link has been established between the API's chemical stability, its physical stability and the relative humidity in the air. Humidity levels above 40% are detrimental to the quality of the API. Copyright © 2016 Elsevier B.V. All rights reserved.
Chen, Huey Jen
2005-12-01
The stigma of mental illness is one of the factors that prevents Asian Americans/Pacific Islanders (APIs) from seeking formal mental health services. A somatic complaint is more acceptable in expressing psychiatric/emotional distress. Admission diagnoses in API emergency service users with secondary psychiatric diagnoses were identified from the 2001 National Inpatient Sample (NIS) of the Healthcare Cost and Utilization Project (HCUP). The sample consisted of 10,623 adult APIs. The study examined the differences in the six leading principal physical admission diagnoses between API emergency service users with psychiatric diagnoses and those without psychiatric diagnoses. Several of the study findings create concern (e.g., the higher percentage of APIs with psychiatric diagnosis who were discharged against medical advice, the high percentage admitted with medication intoxication). Further study is needed to provide guidance for clinical practice.
Gadermaier, Gabriele; Hauser, Michael; Egger, Matthias; Ferrara, Rosetta; Briza, Peter; Souza Santos, Keity; Zennaro, Danila; Girbl, Tamara; Zuidmeer-Jongejan, Laurian; Mari, Adriano; Ferreira, Fatima
2011-01-01
Background Celery (Apium graveolens) represents a relevant allergen source that can elicit severe reactions in the adult population. To investigate the sensitization prevalence and cross-reactivity of Api g 2 from celery stalks in a Mediterranean population and in a mouse model. Methodology 786 non-randomized subjects from Italy were screened for IgE reactivity to rApi g 2, rArt v 3 (mugwort pollen LTP) and nPru p 3 (peach LTP) using an allergen microarray. Clinical data of 32 selected patients with reactivity to LTP under investigation were evaluated. Specific IgE titers and cross-inhibitions were performed in ELISA and allergen microarray. Balb/c mice were immunized with purified LTPs; IgG titers were determined in ELISA and mediator release was examined using RBL-2H3 cells. Simulated endolysosomal digestion was performed using microsomes obtained from human DCs. Results IgE testing showed a sensitization prevalence of 25.6% to Api g 2, 18.6% to Art v 3, and 28.6% to Pru p 3 and frequent co-sensitization and correlating IgE-reactivity was observed. 10/32 patients suffering from LTP-related allergy reported symptoms upon consumption of celery stalks which mainly presented as OAS. Considerable IgE cross-reactivity was observed between Api g 2, Art v 3, and Pru p 3 with varying inhibition degrees of individual patients' sera. Simulating LTP mono-sensitization in a mouse model showed development of more congruent antibody specificities between Api g 2 and Art v 3. Notably, biologically relevant murine IgE cross-reactivity was restricted to the latter and diverse from Pru p 3 epitopes. Endolysosomal processing of LTP showed generation of similar clusters, which presumably represent T-cell peptides. Conclusions Api g 2 represents a relevant celery stalk allergen in the LTP-sensitized population. The molecule displays common B cell epitopes and endolysosomal peptides that encompass T cell epitopes with pollen and plant-food derived LTP. PMID:21897872
Develop 3G Application with The J2ME SATSA API
NASA Astrophysics Data System (ADS)
JunWu, Xu; JunLing, Liang
This paper describes research in the use of the Security and Trust Services API for J2ME (SATSA) to develop mobile applications. for 3G networks. SATSA defines a set of APIs that allows J2ME applications to communicate with and access functionality, secure storage and cryptographic operations provided by security elements such as smart cards and Wireless Identification Modules (WIM). A Java Card application could also work as an authentication module in a J2ME-based e-bank application. The e-bank application would allow its users to access their bank accounts using their cell phones.
Pokhrel, Pallav; Fagan, Pebbles; Cassel, Kevin; Trinidad, Dennis R.; Kaholokula, Joseph Keawe‘aimoku; Herzog, Thaddeus A.
2016-01-01
Cigarette smoking may be one of the factors contributing to the high levels of cancer-related mortality experienced by certain Asian/Pacific Islander (A/PI) subgroups (e.g., Native Hawaiian). Given the collectivist cultural orientation attributed to A/PI groups, social strategies are recommended for substance abuse or smoking cessation treatment among A/PI. However, research examining how social network characteristics and social support relate to smoking across A/PI subgroups has been lacking. This study investigated the associations between social network characteristics (e.g., size, composition), perceived social support, and recent cigarette use across Native Hawaiian, Filipino, and East Asian (e.g., Japanese, Chinese) young adults (18–35 year old). Cross-sectional, self-report data were collected from N = 435 participants (M age = 25.6, SD = 8.3; 61% women). Ethnic differences were found in a number of pathways linking social network characteristics, perceived social support, and cigarette smoking. Larger network size was strongly associated with higher perceived social support and lower recent cigarette smoking among Native Hawaiians but not Filipinos or East Asians. Higher perceived social support was associated with lower recent smoking among East Asians and Filipinos but not Native Hawaiians. Implications are discussed with regard to smoking prevention and cessation among A/PI. PMID:27297612
Temporal genetic structure of a drone congregation area of the giant Asian honeybee ( Apis dorsata)
NASA Astrophysics Data System (ADS)
Kraus, F. B.; Koeniger, N.; Tingek, S.; Moritz, R. F. A.
2005-12-01
The giant Asian honeybee ( Apis dorsata), like all other members of the genus Apis, has a complex mating system in which the queens and males (drones) mate at spatially defined drone congregation areas (DCAs). Here, we studied the temporal genetic structure of a DCA of A. dorsata over an 8-day time window by the genotyping of sampled drones with microsatellite markers. Analysis of the genotypic data revealed a significant genetic differentiation between 3 sampling days and indicated that the DCA was used by at least two subpopulations at all days in varying proportions. The estimation of the number of colonies which used the DCA ranged between 20 and 40 colonies per subpopulation, depending on the estimation procedure and population. The overall effective population size was estimated as high as N e=140. The DCA seems to counteract known tendencies of A. dorsata for inbreeding within colony aggregations by facilitating gene flow among subpopulations and increasing the effective population size.
Bostijn, N; Hellings, M; Van Der Veen, M; Vervaet, C; De Beer, T
2018-07-12
UltraViolet (UV) spectroscopy was evaluated as an innovative Process Analytical Technology (PAT) - tool for the in-line and real-time quantitative determination of low-dosed active pharmaceutical ingredients (APIs) in a semi-solid (gel) and a liquid (suspension) pharmaceutical formulation during their batch production process. The performance of this new PAT-tool (i.e., UV spectroscopy) was compared with an already more established PAT-method based on Raman spectroscopy. In-line UV measurements were carried out with an immersion probe while for the Raman measurements a non-contact PhAT probe was used. For both studied formulations, an in-line API quantification model was developed and validated per spectroscopic technique. The known API concentrations (Y) were correlated with the corresponding in-line collected preprocessed spectra (X) through a Partial Least Squares (PLS) regression. Each developed quantification method was validated by calculating the accuracy profile on the basis of the validation experiments. Furthermore, the measurement uncertainty was determined based on the data generated for the determination of the accuracy profiles. From the accuracy profile of the UV- and Raman-based quantification method for the gel, it was concluded that at the target API concentration of 2% (w/w), 95 out of 100 future routine measurements given by the Raman method will not deviate more than 10% (relative error) from the true API concentration, whereas for the UV method the acceptance limits of 10% were exceeded. For the liquid formulation, the Raman method was not able to quantify the API in the low-dosed suspension (0.09% (w/w) API). In contrast, the in-line UV method was able to adequately quantify the API in the suspension. This study demonstrated that UV spectroscopy can be adopted as a novel in-line PAT-technique for low-dose quantification purposes in pharmaceutical processes. Important is that none of the two spectroscopic techniques was superior to the other for both formulations: the Raman method was more accurate in quantifying the API in the gel (2% (w/w) API), while the UV method performed better for API quantification in the suspension (0.09% (w/w) API). Copyright © 2018 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
LeGendre, M.
2012-04-01
We are seeking a code review of patches against DyninstAPI 8.0. DyninstAPI is an open source binary instrumentation library from the University of Wisconsin and University of Maryland. Our patches port DyninstAPI to the BlueGene/P and BlueGene/Q systems, as well as fix DyninstAPI bugs and implement minor new features in DyninstAPI.
Determinants of quality, latency, and amount of Stack Overflow answers about recent Android APIs
Filkov, Vladimir
2018-01-01
Stack Overflow is a popular crowdsourced question and answer website for programming-related issues. It is an invaluable resource for software developers; on average, questions posted there get answered in minutes to an hour. Questions about well established topics, e.g., the coercion operator in C++, or the difference between canonical and class names in Java, get asked often in one form or another, and answered very quickly. On the other hand, questions on previously unseen or niche topics take a while to get a good answer. This is particularly the case with questions about current updates to or the introduction of new application programming interfaces (APIs). In a hyper-competitive online market, getting good answers to current programming questions sooner could increase the chances of an app getting released and used. So, can developers anyhow, e.g., hasten the speed to good answers to questions about new APIs? Here, we empirically study Stack Overflow questions pertaining to new Android APIs and their associated answers. We contrast the interest in these questions, their answer quality, and timeliness of their answers to questions about old APIs. We find that Stack Overflow answerers in general prioritize with respect to currentness: questions about new APIs do get more answers, but good quality answers take longer. We also find that incentives in terms of question bounties, if used appropriately, can significantly shorten the time and increase answer quality. Interestingly, no operationalization of bounty amount shows significance in our models. In practice, our findings confirm the value of bounties in enhancing expert participation. In addition, they show that the Stack Overflow style of crowdsourcing, for all its glory in providing answers about established programming knowledge, is less effective with new API questions. PMID:29547620
Determinants of quality, latency, and amount of Stack Overflow answers about recent Android APIs.
Kavaler, David; Filkov, Vladimir
2018-01-01
Stack Overflow is a popular crowdsourced question and answer website for programming-related issues. It is an invaluable resource for software developers; on average, questions posted there get answered in minutes to an hour. Questions about well established topics, e.g., the coercion operator in C++, or the difference between canonical and class names in Java, get asked often in one form or another, and answered very quickly. On the other hand, questions on previously unseen or niche topics take a while to get a good answer. This is particularly the case with questions about current updates to or the introduction of new application programming interfaces (APIs). In a hyper-competitive online market, getting good answers to current programming questions sooner could increase the chances of an app getting released and used. So, can developers anyhow, e.g., hasten the speed to good answers to questions about new APIs? Here, we empirically study Stack Overflow questions pertaining to new Android APIs and their associated answers. We contrast the interest in these questions, their answer quality, and timeliness of their answers to questions about old APIs. We find that Stack Overflow answerers in general prioritize with respect to currentness: questions about new APIs do get more answers, but good quality answers take longer. We also find that incentives in terms of question bounties, if used appropriately, can significantly shorten the time and increase answer quality. Interestingly, no operationalization of bounty amount shows significance in our models. In practice, our findings confirm the value of bounties in enhancing expert participation. In addition, they show that the Stack Overflow style of crowdsourcing, for all its glory in providing answers about established programming knowledge, is less effective with new API questions.
Prioritization of pharmaceuticals based on risks to aquatic environments in Kazakhstan.
Aubakirova, Bakhyt; Beisenova, Raikhan; Boxall, Alistair Ba
2017-09-01
Over the last 20 years, there has been increasing interest in the occurrence, fate, effects, and risk of pharmaceuticals in the natural environment. However, we still have only limited or no data on ecotoxicological risks of many of the active pharmaceutical ingredients (APIs) currently in use. This is partly due to the fact that the environmental assessment of an API is an expensive, time-consuming, and complicated process. Prioritization methodologies, which aim to identify APIs of most concern in a particular situation, could therefore be invaluable in focusing experimental work on APIs that really matter. The majority of approaches for prioritizing APIs require annual pharmaceutical usage data. These methods cannot therefore be applied to countries, such as Kazakhstan, that have very limited data on API usage. The present paper therefore offers an approach for prioritizing APIs in surface waters in information-poor regions such as Kazakhstan. Initially data were collected on the number of products and active ingredients for different therapeutic classes in use in Kazakhstan and on the typical doses. These data were then used alongside simple exposure modeling approaches to estimate exposure indices for active ingredients (about 240 APIs) in surface waters in the country. Ecotoxicological effects data were obtained from the literature or predicted. Risk quotients were then calculated for each pharmaceutical based on the exposure and the substances were ranked in order of risk quotient. Highest exposure indices were obtained for benzylpenicillin, metronidazole, sulbactam, ceftriaxone, and sulfamethoxazole. The highest risk was estimated for amoxicillin, clarithromycin, azithromycin, ketoconazole, and benzylpenicillin. In the future, the approach could be employed in other regions where usage information is limited. Integr Environ Assess Manag 2017;13:832-839. © 2017 SETAC. © 2017 SETAC.
Maside, Xulio; Gómez-Moracho, Tamara; Jara, Laura; Martín-Hernández, Raquel; De la Rúa, Pilar; Higes, Mariano; Bartolomé, Carolina
2015-01-01
Two microsporidians are known to infect honey bees: Nosema apis and Nosema ceranae. Whereas population genetics data for the latter have been released in the last few years, such information is still missing for N. apis. Here we analyze the patterns of nucleotide polymorphism at three single-copy loci (PTP2, PTP3 and RPB1) in a collection of Apis mellifera isolates from all over the world, naturally infected either with N. apis (N = 22) or N. ceranae (N = 23), to provide new insights into the genetic diversity, demography and evolution of N. apis, as well as to compare them with evidence from N. ceranae. Neutral variation in N. apis and N. ceranae is of the order of 1%. This amount of diversity suggests that there is no substantial differentiation between the genetic content of the two nuclei present in these parasites, and evidence for genetic recombination provides a putative mechanism for the flow of genetic information between chromosomes. The analysis of the frequency spectrum of neutral variants reveals a significant surplus of low frequency variants, particularly in N. ceranae, and suggests that the populations of the two pathogens are not in mutation-drift equilibrium and that they have experienced a population expansion. Most of the variation in both species occurs within honey bee colonies (between 62%-90% of the total genetic variance), although in N. apis there is evidence for differentiation between parasites isolated from distinct A. mellifera lineages (20%-34% of the total variance), specifically between those collected from lineages A and C (or M). This scenario is consistent with a long-term host-parasite relationship and contrasts with the lack of differentiation observed among host-lineages in N. ceranae (< 4% of the variance), which suggests that the spread of this emergent pathogen throughout the A. mellifera worldwide population is a recent event. PMID:26720131
Maside, Xulio; Gómez-Moracho, Tamara; Jara, Laura; Martín-Hernández, Raquel; De la Rúa, Pilar; Higes, Mariano; Bartolomé, Carolina
2015-01-01
Two microsporidians are known to infect honey bees: Nosema apis and Nosema ceranae. Whereas population genetics data for the latter have been released in the last few years, such information is still missing for N. apis. Here we analyze the patterns of nucleotide polymorphism at three single-copy loci (PTP2, PTP3 and RPB1) in a collection of Apis mellifera isolates from all over the world, naturally infected either with N. apis (N = 22) or N. ceranae (N = 23), to provide new insights into the genetic diversity, demography and evolution of N. apis, as well as to compare them with evidence from N. ceranae. Neutral variation in N. apis and N. ceranae is of the order of 1%. This amount of diversity suggests that there is no substantial differentiation between the genetic content of the two nuclei present in these parasites, and evidence for genetic recombination provides a putative mechanism for the flow of genetic information between chromosomes. The analysis of the frequency spectrum of neutral variants reveals a significant surplus of low frequency variants, particularly in N. ceranae, and suggests that the populations of the two pathogens are not in mutation-drift equilibrium and that they have experienced a population expansion. Most of the variation in both species occurs within honey bee colonies (between 62%-90% of the total genetic variance), although in N. apis there is evidence for differentiation between parasites isolated from distinct A. mellifera lineages (20%-34% of the total variance), specifically between those collected from lineages A and C (or M). This scenario is consistent with a long-term host-parasite relationship and contrasts with the lack of differentiation observed among host-lineages in N. ceranae (< 4% of the variance), which suggests that the spread of this emergent pathogen throughout the A. mellifera worldwide population is a recent event.
The M358R variant of α{sub 1}-proteinase inhibitor inhibits coagulation factor VIIa
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sheffield, William P., E-mail: sheffiel@mcmaster.ca; Department of Pathology and Molecular Medicine, McMaster University, Hamilton, Ontario; Bhakta, Varsha
The naturally occurring M358R mutation of the plasma serpin α{sub 1}-proteinase inhibitor (API) changes both its cleavable reactive centre bond to Arg–Ser and the efficacy with which it inhibits different proteases, reducing the rate of inhibition of neutrophil elastase, and enhancing that of thrombin, factor XIa, and kallikrein, by several orders of magnitude. Although another plasma serpin with an Arg–Ser reactive centre, antithrombin (AT), has been shown to inhibit factor VIIa (FVIIa), no published data are available with respect to FVIIa inhibition by API M358R. Recombinant bacterially-expressed API M358R and plasma-derived AT were therefore compared using gel-based and kinetic assaysmore » of FVIIa integrity and activity. Under pseudo-first order conditions of excess serpin over protease, both AT and API M358R formed denaturation-resistant inhibitory complexes with FVIIa in reactions accelerated by TF; AT, but not API M358R, also required heparin for maximal activity. The second order rate constant for heparin-independent API M358R-mediated FVIIa inhibition was determined to be 7.8 ± 0.8 × 10{sup 2} M{sup −1}sec{sup −1}. We conclude that API M358R inhibits FVIIa by forming inhibitory complexes of the serpin type more rapidly than AT in the absence of heparin. The likely 20-fold excess of API M358R over AT in patient plasma during inflammation raises the possibility that it could contribute to the hemorrhagic tendencies manifested by rare individuals expressing this mutant serpin. - Highlights: • The inhibitory specificity of the serpin alpha-1-proteinase inhibitor (API) is sharply altered in the M358R variant. • API M358R forms denaturation-resistant complexes with coagulation factor VIIa at a rate accelerated by tissue factor but unaffected by heparin. • Complex formation was shown by gel-based assays and quantified kinetically by inhibition of FVIIa-dependent amidolysis.« less
Blank, Simon; Etzold, Stefanie; Darsow, Ulf; Schiener, Maximilian; Eberlein, Bernadette; Russkamp, Dennis; Wolf, Sara; Graessel, Anke; Biedermann, Tilo; Ollert, Markus; Schmidt-Weber, Carsten B.
2017-01-01
ABSTRACT Allergen-specific immunotherapy is the only curative treatment of honeybee venom (HBV) allergy, which is able to protect against further anaphylactic sting reactions. Recent analyses on a molecular level have demonstrated that HBV represents a complex allergen source that contains more relevant major allergens than formerly anticipated. Moreover, allergic patients show very diverse sensitization profiles with the different allergens. HBV-specific immunotherapy is conducted with HBV extracts which are derived from pure venom. The allergen content of these therapeutic extracts might differ due to natural variations of the source material or different down-stream processing strategies of the manufacturers. Since variations of the allergen content of therapeutic HBV extracts might be associated with therapeutic failure, we adressed the component-resolved allergen composition of different therapeutic grade HBV extracts which are approved for immunotherapy in numerous countries. The extracts were analyzed for their content of the major allergens Api m 1, Api m 2, Api m 3, Api m 5 and Api m 10. Using allergen-specific antibodies we were able to demonstrate the underrepresentation of relevant major allergens such as Api m 3, Api m 5 and Api m 10 in particular therapeutic extracts. Taken together, standardization of therapeutic extracts by determination of the total allergenic potency might imply the intrinsic pitfall of losing information about particular major allergens. Moreover, the variable allergen composition of different therapeutic HBV extracts might have an impact on therapy outcome and the clinical management of HBV-allergic patients with specific IgE to particular allergens. PMID:28494206
Improved blend and tablet properties of fine pharmaceutical powders via dry particle coating.
Huang, Zhonghui; Scicolone, James V; Han, Xi; Davé, Rajesh N
2015-01-30
The improvements in the flow and packing of fine pharmaceutical powder blends due to dry coating of micronized acetaminophen (mAPAP, ∼11μm), a model poorly flowing drug, are quantified. Poor flow and packing density of fine excipients (∼20μm) allowed testing the hypothesis that dry coating of cohesive API may counteract poor flow and packing of fine pharmaceutical powder blends. Further, fine excipients could improve compaction and reduce segregation tendency. It was found that flow function coefficient (FFC) and bulk density enhancements for 10%, 30%, and 60% (w/w), API loading blends with dry coated API are significantly higher than those without coated silica. At the highest API loading, for which coarser excipients were also used as reference, the flow and packing of dry coated mAPAP blends were significantly increased regardless of the excipient particle size, exceeding those of a well compacting excipient, Avicel 102. In addition, tensile strength of tablets with fine excipients was significantly higher, indicating improved compactibility. These results show for the first time that dry coating of fine, cohesive API powder leads to significantly improved flow and packing of high API loading blends consisting of fine excipients, while achieving improved tablet compactibility, suggesting suitability for direct compaction. Copyright © 2014 Elsevier B.V. All rights reserved.
Karabıçak, Nilgün; Uludağ Altun, Hatice; Karatuna, Onur; Hazırolan, Gülşen; Aksu, Neriman; Adiloğlu, Ali; Akyar, Işın
2015-04-01
Accurate and rapid identification of yeast isolates have become important in recent years for not only antifungal susceptibility testing due to the species-specific clinical resistance breakpoints but also early initiation of appropriate antifungal therapy. In clinical microbiology laboratories species identification of yeasts is often performed with several commercial systems based on biochemical properties and rarely according to the physiological and morphological characteristics. The aim of this study was to compare the two common commercial systems, VITEK 2 YST ID Card (Vitek; bioMérieux, France) and API 20C AUX (API; bioMérieux, France) with conventional mycological methods. A total of 473 clinical yeast strains isolated from clinical specimens in different university and training/research hospitals and identified by Vitek system were included in the study. The isolates were re-identified with API and conventional methods including morphological identification in the Mycology Reference Laboratory of the Public Health Institute of Turkey. Candida dubliniensis MYA 583, Candida krusei ATCC 6258, Candida parapsilosis ATCC 22019, Candida albicans ATCC 10231 and Cryptococcus neoformans ATCC 32268 were used as quality control strains and those standard strains were studied consecutively 10 days with both of the methods. The results of identification by Vitek and API were compared with the results of conventional methods for those 473 yeast isolates [6 genus (Candida, Cryptococcus, Blastoshizomyces, Rhodotorula, Saccharomyces, Trichosporon), 17 species (5 common and 12 rarely isolated)]. The performances of the systems were better (Vitek: 95%; API: 96%) for the commonly detected species (C.albicans, C.parapsilosis, C.glabrata, C.tropicalis and C.krusei) than those for rarely detected species (Vitek: 78.4%; API: 71.6%) (p= 0.155). Misidentification or unidentification were mostly detected for C.parapsilosis (Vitek: 6/87; API: 7/87) and C.glabrata (Vitek: 9/104; API: 3/104) by both of the systems. For rarely detected yeast isolates, misidentification or unidentification were most frequently observed in species of C.pelliculosa (Vitek: 3/11; API: 6/11) and C.dubliniensis (API and Vitek: 2/5) isolates. Candida guilliermondii (API: 2/5) isolates had lower rate of identification with API compared to other species. Blastoschizomyces capitatus and Saccharomyces cerevisiae isolates could not be identified by both of the systems. As a result, the accurate diagnosis of Vitek and API systems were similar in terms of consistency (86.3%). Two systems performed well in correct identification of common clinical yeast species (at least 95%), while the identification of rare species was more challenging indicating that they require further morphological and physiological testing. The addition of morphological identification to commercial systems will be useful for accurate diagnosis and treatment of mixed infections.
Bluhm, Martina E. C.; Schneider, Viktoria A. F.; Schäfer, Ingo; Piantavigna, Stefania; Goldbach, Tina; Knappe, Daniel; Seibel, Peter; Martin, Lisandra L.; Veldhuizen, Edwin J. A.; Hoffmann, Ralf
2016-01-01
The Gram-negative bacterium Pseudomonas aeruginosa is a life-threatening nosocomial pathogen due to its generally low susceptibility toward antibiotics. Furthermore, many strains have acquired resistance mechanisms requiring new antimicrobials with novel mechanisms to enhance treatment options. Proline-rich antimicrobial peptides, such as the apidaecin analog Api137, are highly efficient against various Enterobacteriaceae infections in mice, but less active against P. aeruginosa in vitro. Here, we extended our recent work by optimizing lead peptides Api755 (gu-OIORPVYOPRPRPPHPRL-OH; gu = N,N,N′,N′-tetramethylguanidino, O = L-ornithine) and Api760 (gu-OWORPVYOPRPRPPHPRL-OH) by incorporation of Ile-Orn- and Trp-Orn-motifs, respectively. Api795 (gu-O(IO)2RPVYOPRPRPPHPRL-OH) and Api794 (gu-O(WO)3RPVYOPRPRPPHPRL-OH) were highly active against P. aeruginosa with minimal inhibitory concentrations of 8–16 and 8–32 μg/mL against Escherichia coli and Klebsiella pneumoniae. Assessed using a quartz crystal microbalance, these peptides inserted into a membrane layer and the surface activity increased gradually from Api137, over Api795, to Api794. This mode of action was confirmed by transmission electron microscopy indicating some membrane damage only at the high peptide concentrations. Api794 and Api795 were highly stable against serum proteases (half-life times >5 h) and non-hemolytic to human erythrocytes at peptide concentrations of 0.6 g/L. At this concentration, Api795 reduced the cell viability of HeLa cells only slightly, whereas the IC50 of Api794 was 0.23 ± 0.09 g/L. Confocal fluorescence microscopy revealed no colocalization of 5(6)-carboxyfluorescein-labeled Api794 or Api795 with the mitochondria, excluding interactions with the mitochondrial membrane. Interestingly, Api795 was localized in endosomes, whereas Api794 was present in endosomes and the cytosol. This was verified using flow cytometry showing a 50% higher uptake of Api794 in HeLa cells compared with Api795. The uptake was reduced for both peptides by 50 and 80%, respectively, after inhibiting endocytotic uptake with dynasore. In summary, Api794 and Api795 were highly active against P. aeruginosa in vitro. Both peptides passed across the bacterial membrane efficiently, most likely then disturbing the ribosome assembly, and resulting in further intracellular damage. Api795 with its IOIO-motif, which was particularly active and only slightly toxic in vitro, appears to represent a promising third generation lead compound for the development of novel antibiotics against P. aeruginosa. PMID:27243004
The Application Programming Interface (API) for Uncertainty Analysis, Sensitivity Analysis, and Parameter Estimation (UA/SA/PE API) tool development, here fore referred to as the Calibration, Optimization, and Sensitivity and Uncertainty Algorithms API (COSU-API), was initially d...
Validation of the Abdominal Pain Index Using a Revised Scoring Method
Sherman, Amanda L.; Smith, Craig A.; Walker, Lynn S.
2015-01-01
Objective Evaluate the psychometric properties of child- and parent-report versions of the four-item Abdominal Pain Index (API) in children with functional abdominal pain (FAP) and healthy controls, using a revised scoring method that facilitates comparisons of scores across samples and time. Methods Pediatric patients aged 8–18 years with FAP and controls completed the API at baseline (N = 1,967); a subset of their parents (N = 290) completed the API regarding the child’s pain. Subsets of patients completed follow-up assessments at 2 weeks (N = 231), 3 months (N = 330), and 6 months (N = 107). Subsets of both patients (N = 389) and healthy controls (N = 172) completed a long-term follow-up assessment (mean age at follow-up = 20.21 years, SD = 3.75). Results The API demonstrated good concurrent, discriminant, and construct validity, as well as good internal consistency. Conclusion We conclude that the API, using the revised scoring method, is a useful, reliable, and valid measure of abdominal pain severity. PMID:25617048
Sinpoo, Chainarong; Paxton, Robert J; Disayathanoowat, Terd; Krongdang, Sasiprapa; Chantawannakul, Panuwan
Nosema apis and Nosema ceranae are obligate intracellular microsporidian parasites infecting midgut epithelial cells of host adult honey bees, originally Apis mellifera and Apis cerana respectively. Each microsporidia cross-infects the other host and both microsporidia nowadays have a worldwide distribution. In this study, cross-infection experiments using both N. apis and N. ceranae in both A. mellifera and A. cerana were carried out to compare pathogen proliferation and impact on hosts, including host immune response. Infection by N. ceranae led to higher spore loads than by N. apis in both host species, and there was greater proliferation of microsporidia in A. mellifera compared to A. cerana. Both N. apis and N. ceranae were pathogenic in both host Apis species. N. ceranae induced subtly, though not significantly, higher mortality than N. apis in both host species, yet survival of A. cerana was no different to that of A. mellifera in response to N. apis or N. ceranae. Infections of both host species with N. apis and N. ceranae caused significant up-regulation of AMP genes and cellular mediated immune genes but did not greatly alter apoptosis-related gene expression. In this study, A. cerana enlisted a higher immune response and displayed lower loads of N. apis and N. ceranae spores than A. mellifera, suggesting it may be better able to defend itself against microsporidia infection. We caution against over-interpretation of our results, though, because differences between host and parasite species in survival were insignificant and because size differences between microsporidia species and between host Apis species may alternatively explain the differential proliferation of N. ceranae in A. mellifera. Copyright © 2017 Elsevier Ltd. All rights reserved.
Miyagi, Etsuko; Maruyama, Yasuyo; Mogami, Tae; Numazaki, Reiko; Ikeda, Atsuko; Yamamoto, Hiroshi; Hirahara, Fumiki
2017-02-01
We previously developed a new plasma amino acid profile-based index (API) to detect ovarian, cervical, and endometrial cancers. Here, we compared API to serum cancer antigen 125 (CA125) for distinguishing epithelial ovarian malignant tumors from benign growths. API and CA125 were measured preoperatively in patients with ovarian tumors, which were later classified into 59 epithelial ovarian cancers, 21 epithelial borderline malignant tumors, and 97 benign tumors including 40 endometriotic cysts. The diagnostic accuracy and cutoff points of API were evaluated using receiver operating characteristic (ROC) curves. The area under the ROC curves showed the equivalent performance of API and CA125 to discriminate between malignant/borderline malignant and benign tumors (both 0.77), and API was superior to CA125 for discrimination between malignant/borderline malignant lesions and endometriotic cysts (API, 0.75 vs. CA125, 0.59; p < 0.05). At the API cutoff level of 6.0, API and CA125 had equal positive rates of detecting cancers and borderline malignancies (API, 0.71 vs. CA125, 0.74; p = 0.84) or cancers alone (API, 0.73 vs. CA125, 0.85; p = 0.12). However, API had a significantly lower detection rate of benign endometriotic cysts (0.35; 95 % CI, 0.21-0.52) compared with that of CA125 (0.65; 95 % CI, 0.48-0.79) (p < 0.05). API is an effective new tumor marker to detect ovarian cancers and borderline malignancies with a low false-positive rate for endometriosis. A large-scale prospective clinical study using the cutoff value of API determined in this study is warranted to validate API for practical clinical use.
Pokhrel, Pallav; Fagan, Pebbles; Cassel, Kevin; Trinidad, Dennis R; Kaholokula, Joseph Keawe'aimoku; Herzog, Thaddeus A
2016-06-01
Cigarette smoking may be one of the factors contributing to the high levels of cancer-related mortality experienced by certain Asian/Pacific Islander (A/PI) subgroups (e.g., Native Hawaiian). Given the collectivist cultural orientation attributed to A/PI groups, social strategies are recommended for substance abuse or smoking cessation treatment among A/PI. However, research examining how social network characteristics and social support relate to smoking across A/PI subgroups has been lacking. This study investigated the associations between social network characteristics (e.g., size, composition), perceived social support, and recent cigarette use across Native Hawaiian, Filipino, and East Asian (e.g., Japanese, Chinese) young adults (18-35 year old). Cross-sectional, self-report data were collected from N = 435 participants (M age = 25.6, SD = 8.3; 61% women). Ethnic differences were found in a number of pathways linking social network characteristics, perceived social support, and cigarette smoking. Larger network size was strongly associated with higher perceived social support and lower recent cigarette smoking among Native Hawaiians but not Filipinos or East Asians. Higher perceived social support was associated with lower recent smoking among East Asians and Filipinos but not Native Hawaiians. Implications are discussed with regard to smoking prevention and cessation among A/PI. © Society for Community Research and Action 2016.
Fortunak, Joseph M; de Souza, Rodrigo O M A; Kulkarni, Amol A; King, Christopher L; Ellison, Tiffany; Miranda, Leandro S M
2014-01-01
Active pharmaceutical ingredients (APIs) are the molecular entities that exert the therapeutic effects of medicines. This article provides an overview of the major APIs that are entered into antiretroviral therapy (ART), outlines how APIs are manufactured, and examines the regulatory and cost frameworks of manufacturing ART APIs used in low- and middle-income countries (LMICs). Almost all APIs for ART are prepared by chemical synthesis. Roughly 15 APIs account for essentially all of the ARTs used in LMICs. Nearly all of the ART APIs purchased through the Global Fund for AIDS, TB and Malaria (GFATM) or the United States President's Emergency Plan for AIDS Relief (PEPFAR) are produced by generic companies. API costs are very important because they are the largest contribution to the overall cost of ART. Efficient API production requires substantial investment in chemical manufacturing technologies and the ready availability of raw materials and energy at competitive prices. Generic API production is practiced in only a limited number of countries; the API market for ART is dominated by Indian companies. The quality of these APIs is ensured by manufacturing under good manufacturing practice (GMP), including process validation, testing against previously established specifications and the demonstration of clinical bioequivalence. The investment and personnel costs of a quality management system for GMP contribute significantly to the cost of API production. Chinese companies are the major suppliers for many advanced intermediates in API production. Improved chemistry of manufacturing, economies of scale and optimization of procurement have enabled drastic cost reductions for many ART APIs. The available capacity for global production of quality-assured APIs is likely adequate to meet forecasted demand for 2015. The increased use of ART for paediatric treatment, for second-line and salvage therapy, and the introduction of new APIs and combinations are important factors for the future of treatment in LMICs. The introduction of new fixed-dose combinations for ART and use of new drug delivery technologies could plausibly provide robust, durable ART for all patients in need, at an overall cost that is only moderately higher than what is presently being spent.
Fortunak, Joseph M; de Souza, Rodrigo OMA; Kulkarni, Amol A; King, Christopher L; Ellison, Tiffany; Miranda, Leandro SM
2015-01-01
Active pharmaceutical ingredients (APIs) are the molecular entities that exert the therapeutic effects of medicines. This article provides an overview of the major APIs that are entered into antiretroviral therapy (ART), outlines how APIs are manufactured, and examines the regulatory and cost frameworks of manufacturing ART APIs used in low- and middle-income countries (LMICs). Almost all APIs for ART are prepared by chemical synthesis. Roughly 15 APIs account for essentially all of the ARTs used in LMICs. Nearly all of the ART APIs purchased through the Global Fund for AIDS, TB and Malaria (GFATM) or the United States President’s Emergency Plan for AIDS Relief (PEPFAR) are produced by generic companies. API costs are very important because they are the largest contribution to the overall cost of ART. Efficient API production requires substantial investment in chemical manufacturing technologies and the ready availability of raw materials and energy at competitive prices. Generic API production is practiced in only a limited number of countries; the API market for ART is dominated by Indian companies. The quality of these APIs is ensured by manufacturing under good manufacturing practice (GMP), including process validation, testing against previously established specifications and the demonstration of clinical bioequivalence. The investment and personnel costs of a quality management system for GMP contribute significantly to the cost of API production. Chinese companies are the major suppliers for many advanced intermediates in API production. Improved chemistry of manufacturing, economies of scale and optimization of procurement have enabled drastic cost reductions for many ART APIs. The available capacity for global production of quality-assured APIs is likely adequate to meet forecasted demand for 2015. The increased use of ART for paediatric treatment, for second-line and salvage therapy, and the introduction of new APIs and combinations are important factors for the future of treatment in LMICs. The introduction of new fixed-dose combinations for ART and use of new drug delivery technologies could plausibly provide robust, durable ART for all patients in need, at an overall cost that is only moderately higher than what is presently being spent. PMID:25310430
Lau, Michael; Young, Paul M; Traini, Daniela
2017-08-01
The aim of the study was to understand the impact of different concentrations of the additive material, magnesium stearate (MGST), and the active pharmaceutical ingredient (API), respectively, on the physicochemical properties and aerosol performance of comilled formulations for high-dose delivery. Initially, blends of API/lactose with different concentrations of MGST (1-7.5% w/w) were prepared and comilled by the jet-mill apparatus. The optimal concentration of MGST in comilled formulations was investigated, specifically for agglomerate structure and strength, particle size, uniformity of content, surface coverage, and aerosol performance. Secondly, comilled formulations with different API (1-40% w/w) concentrations were prepared and similarly analyzed. Comilled 5% MGST (w/w) formulation resulted in a significant improvement in in vitro aerosol performance due to the reduction in agglomerate size and strength compared to the formulation comilled without MGST. Higher concentrations of MGST (7.5% w/w) led to reduction in aerosol performance likely due to excessive surface coverage of the micronized particles by MGST, which led to failure in uniformity of content and an increase in agglomerate strength and size. Generally, comilled formulations with higher concentrations of API increased the agglomerate strength and size, which subsequently caused a reduction in aerosol performance. High-dose delivery was achieved at API concentration of >20% (w/w). The study provided a platform for the investigation of aerosol performance and physicochemical properties of other API and additive materials in comilled formulations for the emerging field of high-dose delivery by dry powder inhalation.
Nielsen, U; Hastrup, C; Klausen, M M; Pedersen, B M; Kristensen, G H; Jansen, J L C; Bak, S N; Tuerk, J
2013-01-01
The objective of this study has been to develop technologies that can reduce the content of active pharmaceutical ingredients (APIs) and bacteria from hospital wastewater. The results from the laboratory- and pilot-scale testings showed that efficient removal of the vast majority of APIs could be achieved by a membrane bioreactor (MBR) followed by ozone, ozone + hydrogen peroxide or powdered activated carbon (PAC). Chlorine dioxide (ClO(2)) was significantly less effective. MBR + PAC (450 mg/l) was the most efficient technology, while the most cost-efficient technology was MBR + ozone (156 mg O(3)/l applied over 20 min). With MBR an efficient removal of Escherichia coli and enterococci was measured, and no antibiotic resistant bacteria were detected in the effluent. With MBR + ozone and MBR + PAC also the measured effluent concentrations of APIs (e.g. ciprofloxacin, sulfamethoxazole and sulfamethizole) were below available predicted no-effect concentrations (PNEC) for the marine environment without dilution. Iodinated contrast media were also reduced significantly (80-99% for iohexol, iopromide and ioversol and 40-99% for amidotrizoateacid). A full-scale MBR treatment plant with ozone at a hospital with 900 beds is estimated to require an investment cost of €1.6 mill. and an operating cost of €1/m(3) of treated water.
Temporal and spatial behavior of pharmaceuticals in ...
The behavior of active pharmaceutical ingredients (APIs) in urban estuaries is not well understood. In this study, 15 high volume usage APIs were measured over a one year period throughout Narragansett Bay, RI, USA to determine factors controlling their concentration and distribution. Dissolved APIs ranged in concentration from not detected to 310 ng/L, with numerous APIs present at all sites and sampling periods. Eight APIs were present in suspended particulate material, ranging in concentration from <1 ng/g to 44 ng/g. Partitioning coefficients (Kds) were determined for APIs present in both the dissolved and particulate phases, with their range and variability remaining relatively constant during the study. Organic carbon normalization reduced the observed variability of several APIs to a small extent; however, other factors appear to play a role in controlling partitioning behavior. The continuous discharge of wastewater treatment plant effluents into upper Narragansett Bay resulted in sustained levels of APIs, resulting in a zone of “pseudo-persistence.” For most of the APIs, there was a strong relationship with salinity, indicating conservative behavior within the estuary. Short flushing times in Narragansett Bay coupled with APIs present primarily in the dissolved phase suggests that most APIs will be diluted and transported out of the estuary, with only small amounts of several compounds removed to and sequestered in sediments. This study ide
49 CFR 195.565 - How do I install cathodic protection on breakout tanks?
Code of Federal Regulations, 2011 CFR
2011-10-01
...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...
49 CFR 195.579 - What must I do to mitigate internal corrosion?
Code of Federal Regulations, 2012 CFR
2012-10-01
... API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the lining in accordance with API Recommended Practice 652. However, installation of the lining need not comply with API Recommended Practice 652 on any tank for which you note in the corrosion...
49 CFR 195.565 - How do I install cathodic protection on breakout tanks?
Code of Federal Regulations, 2014 CFR
2014-10-01
...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...
49 CFR 195.565 - How do I install cathodic protection on breakout tanks?
Code of Federal Regulations, 2013 CFR
2013-10-01
...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...
49 CFR 195.579 - What must I do to mitigate internal corrosion?
Code of Federal Regulations, 2010 CFR
2010-10-01
... API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the lining in accordance with API Recommended Practice 652. However, installation of the lining need not comply with API Recommended Practice 652 on any tank for which you note in the corrosion...
49 CFR 195.579 - What must I do to mitigate internal corrosion?
Code of Federal Regulations, 2013 CFR
2013-10-01
... API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the lining in accordance with API Recommended Practice 652. However, installation of the lining need not comply with API Recommended Practice 652 on any tank for which you note in the corrosion...
49 CFR 195.579 - What must I do to mitigate internal corrosion?
Code of Federal Regulations, 2011 CFR
2011-10-01
... API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the lining in accordance with API Recommended Practice 652. However, installation of the lining need not comply with API Recommended Practice 652 on any tank for which you note in the corrosion...
49 CFR 195.565 - How do I install cathodic protection on breakout tanks?
Code of Federal Regulations, 2012 CFR
2012-10-01
...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...
49 CFR 195.579 - What must I do to mitigate internal corrosion?
Code of Federal Regulations, 2014 CFR
2014-10-01
... API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the lining in accordance with API Recommended Practice 652. However, installation of the lining need not comply with API Recommended Practice 652 on any tank for which you note in the corrosion...
49 CFR 195.565 - How do I install cathodic protection on breakout tanks?
Code of Federal Regulations, 2010 CFR
2010-10-01
...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...
Lukschal, Anna; Wallmann, Julia; Bublin, Merima; Hofstetter, Gerlinde; Mothes-Luksch, Nadine; Breiteneder, Heimo; Pali-Schöll, Isabella; Jensen-Jarolim, Erika
2016-03-01
In the celery-mugwort-birch-spice syndrome, a significant proportion of IgE is directed against high molecular weight (HMW) glycoproteins, including the celery allergen Api g 5. BIP3, a monoclonal antibody originally raised against birch pollen, recognizes HMW allergens in birch and mugwort pollens, celery, and Apiaceae spices. Our aim was to generate mimotopes using BIP3 for immunization against the HMW allergens relevant in the celery-mugwort-birch-spice cross reactivity syndrome. Mimotopes were selected from a random-peptide display library by BIP3 and applied in IgE inhibition assays. The 3 phage clones with the highest inhibitory capacity were chosen for immunization of BALB/c mice. Mouse immune sera were tested for IgG binding to blotted birch pollen extract and used for inhibiting patients' IgE binding. Furthermore, sera were tested for binding to Api g 5, to horseradish peroxidase (HRP) as a second glycoprotein, or to non-glycosylated control allergen Phl p 5 in ELISA, and the specific Api g 5-specific IgG titers were determined. Three rounds of biopanning resulted in phage clones exhibiting 7 different sequences including 1 dominant, 1-6-cyclo-CHKLRCDKAIA. Three phage clones had the capacity to inhibit human IgE binding and induced IgG to the HMW antigen when used for immunizing BALB/c mice. The induced BIP3-mimotope IgG reached titers of 1:500 specifically to Api g 5, but hardly reacted to glycoprotein HRP, revealing a minor role of carbohydrates in their epitope. The mimotopes characterized in this study mimic the epitope of BIP3 relevant for Api g 5, one of the cross-reactive HMW allergens relevant in the celery-mugwort-birch-spice syndrome. BIP3 mimotopes may be used in the future for hyposensitization in this clinical syndrome by virtue of good and specific immunogenicity.
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2013 CFR
2013-10-01
...: Prevention measure Standard Credit(percent) Secondary containment >100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2010 CFR
2010-10-01
...: Prevention measure Standard Credit(percent) Secondary containment > 100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2014 CFR
2014-10-01
...: Prevention measure Standard Credit(percent) Secondary containment >100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2012 CFR
2012-10-01
...: Prevention measure Standard Credit(percent) Secondary containment > 100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2011 CFR
2011-10-01
...: Prevention measure Standard Credit(percent) Secondary containment > 100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
Li, Bo; Ren, Hui; Yue, Ping; Chen, Mingwei; Khuri, Fadlo R.; Sun, Shi-Yong
2012-01-01
API-1 is a novel small molecule inhibitor of Akt, which acts by binding to Akt and preventing its membrane translocation, and has promising preclinical antitumor activity. In this study, we reveal a novel function of API-1 in regulation of c-FLIP levels and tumor necrosis factor-related apoptosis-inducing ligand (TRAIL)-induced apoptosis, independent of Akt inhibition. API-1 effectively induced apoptosis in tested cancer cell lines including activation of caspase-8 and caspase-9. It reduced the levels of c-FLIP without increasing the expression of DR4 or DR5. Accordingly, it synergized with TRAIL to induce apoptosis. Enforced expression of ectopic c-FLIP did not attenuate API-1-induced apoptosis, but inhibited its ability to enhance TRAIL-induced apoptosis. These data indicate that downregulation of c-FLIP mediates enhancement of TRAIL-induced apoptosis by API-1, but is not sufficient for API-1-induced apoptosis. API-1-induced reduction of c-FLIP could be blocked by the proteasome inhibitor MG132. Moreover, API-1 increased c-FLIP ubiquitination and decreased c-FLIP stability. These data together suggest that API-1 downregulates c-FLIP by facilitating its ubiquitination and proteasome-mediated degradation. Since other Akt inhibitors including API-2 and MK2206 had minimal effects on reducing c-FLIP and enhancement of TRAIL-induced apoptosis, it is likely that API-1 reduces c-FLIP and enhances TRAIL-induced apoptosis independent of its Akt-inhibitory activity. PMID:22345097
Abstraction and Encoding of Sensory Information
1975-01-25
of the visual system of the honeybee ( Apis mellifera ). II. The lamina. J. Ultras:ruct. Res. 31, .178-194 (1970). Varela, F.G.; Wiitanen, W.: The optics...on other insects, e.g. the bee Apis (Kunze 1961), the fruitfly Drosophila (Gotz 1964-1973), the housefly Musca (Fermi und Reichardt 1963, review
The Apis mellifera filamentous virus genome
USDA-ARS?s Scientific Manuscript database
A complete reference genome of the Apis mellifera Filamentous virus (AmFV) was determined using Illumina Hiseq sequencing. The AmFV genome is a double strand DNA molecule of approximately 498’500 nucleotides with a GC content of 50.8%. It encompasses 251 non overlapping open reading frames (ORFs), e...
Goel, Meenakshi; Larson, Eli; Venkatramani, C J; Al-Sayah, Mohammad A
2018-05-01
Enantioselective analysis is an essential requirement during the pharmaceutical development of chiral drug molecules. In pre-clinical and clinical studies, the Food and Drug Administration (FDA) mandates the assessment of "in vivo" inter-conversion of chiral drugs to determine their physiological effects. In-vivo analysis of the active pharmaceutical ingredient (API) and its potential metabolites could be quite challenging due to their low abundance (ng/mL levels) and matrix interferences. Therefore, highly selective and sensitive analytical techniques are required to separate the API and its metabolites from the matrix components and one another. Additionally, for chiral APIs, further analytical separation is required to resolve the API and its potential metabolites from their corresponding enantiomers. In this work, we demonstrate the optimization of our previously designed two-dimensional liquid chromatography-supercritical fluid chromatography-mass spectrometry (2D-LC-SFC -MS) system to achieve 10 ng/mL detection limit [1]. The first LC dimension, used as a desalting step, could efficiently separate the API from its potential metabolites and matrix components. The API and its metabolites were then trapped/focused on small trapping columns and transferred onto the second SFC dimension for chiral separation. Detection can be achieved by ultra-violet (UV) or MS detection. Different system parameters such as column dimensions, transfer volumes, trapping column stationary phase, system tubing internal diameter (i.d.), and detection techniques, were optimized to enhance the sensitivity of the 2D-LC-SFC-MS system. The limit of detection was determined to be 10 ng/mL. An application is described where a mouse hepatocyte treated sample was analyzed using the optimized 2D-LC-SFC-MS system with successful assessment of the ratio of API to its metabolite (1D-LC), as well as the corresponding enantiomeric excess values (% e.e.) of each (2D-SFC). Copyright © 2018 Elsevier B.V. All rights reserved.
A Ruby API to query the Ensembl database for genomic features.
Strozzi, Francesco; Aerts, Jan
2011-04-01
The Ensembl database makes genomic features available via its Genome Browser. It is also possible to access the underlying data through a Perl API for advanced querying. We have developed a full-featured Ruby API to the Ensembl databases, providing the same functionality as the Perl interface with additional features. A single Ruby API is used to access different releases of the Ensembl databases and is also able to query multi-species databases. Most functionality of the API is provided using the ActiveRecord pattern. The library depends on introspection to make it release independent. The API is available through the Rubygem system and can be installed with the command gem install ruby-ensembl-api.
Code of Federal Regulations, 2014 CFR
2014-10-01
...-refrigerated and tanks built to API Standard 650 or its predecessor Standard 12C, repair, alteration, and reconstruction must be in accordance with API Standard 653. (2) For tanks built to API Specification 12F or API..., examination, and material requirements of those respective standards. (3) For high pressure tanks built to API...
Code of Federal Regulations, 2013 CFR
2013-10-01
...-refrigerated and tanks built to API Standard 650 or its predecessor Standard 12C, repair, alteration, and reconstruction must be in accordance with API Standard 653. (2) For tanks built to API Specification 12F or API..., examination, and material requirements of those respective standards. (3) For high pressure tanks built to API...
Code of Federal Regulations, 2012 CFR
2012-10-01
...-refrigerated and tanks built to API Standard 650 or its predecessor Standard 12C, repair, alteration, and reconstruction must be in accordance with API Standard 653. (2) For tanks built to API Specification 12F or API..., examination, and material requirements of those respective standards. (3) For high pressure tanks built to API...
Code of Federal Regulations, 2011 CFR
2011-10-01
...-refrigerated and tanks built to API Standard 650 or its predecessor Standard 12C, repair, alteration, and reconstruction must be in accordance with API Standard 653. (2) For tanks built to API Specification 12F or API..., examination, and material requirements of those respective standards. (3) For high pressure tanks built to API...
Williams, Geoffrey R.; Shutler, Dave; Burgher-MacLellan, Karen L.; Rogers, Richard E. L.
2014-01-01
Nosema spp. fungal gut parasites are among myriad possible explanations for contemporary increased mortality of western honey bees (Apis mellifera, hereafter honey bee) in many regions of the world. Invasive Nosema ceranae is particularly worrisome because some evidence suggests it has greater virulence than its congener N. apis. N. ceranae appears to have recently switched hosts from Asian honey bees (Apis cerana) and now has a nearly global distribution in honey bees, apparently displacing N. apis. We examined parasite reproduction and effects of N. apis, N. ceranae, and mixed Nosema infections on honey bee hosts in laboratory experiments. Both infection intensity and honey bee mortality were significantly greater for N. ceranae than for N. apis or mixed infections; mixed infection resulted in mortality similar to N. apis parasitism and reduced spore intensity, possibly due to inter-specific competition. This is the first long-term laboratory study to demonstrate lethal consequences of N. apis and N. ceranae and mixed Nosema parasitism in honey bees, and suggests that differences in reproduction and intra-host competition may explain apparent heterogeneous exclusion of the historic parasite by the invasive species. PMID:24987989
Williams, Geoffrey R; Shutler, Dave; Burgher-MacLellan, Karen L; Rogers, Richard E L
2014-01-01
Nosema spp. fungal gut parasites are among myriad possible explanations for contemporary increased mortality of western honey bees (Apis mellifera, hereafter honey bee) in many regions of the world. Invasive Nosema ceranae is particularly worrisome because some evidence suggests it has greater virulence than its congener N. apis. N. ceranae appears to have recently switched hosts from Asian honey bees (Apis cerana) and now has a nearly global distribution in honey bees, apparently displacing N. apis. We examined parasite reproduction and effects of N. apis, N. ceranae, and mixed Nosema infections on honey bee hosts in laboratory experiments. Both infection intensity and honey bee mortality were significantly greater for N. ceranae than for N. apis or mixed infections; mixed infection resulted in mortality similar to N. apis parasitism and reduced spore intensity, possibly due to inter-specific competition. This is the first long-term laboratory study to demonstrate lethal consequences of N. apis and N. ceranae and mixed Nosema parasitism in honey bees, and suggests that differences in reproduction and intra-host competition may explain apparent heterogeneous exclusion of the historic parasite by the invasive species.
Rueppell, Olav; Kuster, Ryan; Miller, Katelyn; Fouks, Bertrand; Rubio Correa, Sara; Collazo, Juan; Phaincharoen, Mananya; Tingek, Salim; Koeniger, Nikolaus
2016-12-01
Western honey bees (Apis mellifera) far exceed the commonly observed 1–2 meiotic recombination events per chromosome and exhibit the highest Metazoan recombination rate (20 cM/Mb) described thus far. However, the reasons for this exceptional rate of recombination are not sufficiently understood. In a comparative study, we report on the newly constructed genomic linkage maps of Apis florea and Apis dorsata that represent the two honey bee lineages without recombination rate estimates so far. Each linkage map was generated de novo, based on SNP genotypes of haploid male offspring of a single female. The A. florea map spans 4,782 cM with 1,279 markers in 16 linkage groups. The A. dorsata map is 5,762 cM long and contains 1,189 markers in 16 linkage groups. Respectively, these map sizes result in average recombination rate estimates of 20.8 and 25.1 cM/Mb. Synteny analyses indicate that frequent intra-chromosomal rearrangements but no translocations among chromosomes accompany the high rates of recombination during the independent evolution of the three major honey bee lineages. Our results imply a common cause for the evolution of very high recombination rates in Apis. Our findings also suggest that frequent homologous recombination during meiosis might increase ectopic recombination and rearrangements within but not between chromosomes. It remains to be investigated whether the resulting inversions may have been important in the evolutionary differentiation between honey bee species.
Ferreira, Anderson O; Polonini, Hudson C; Silva, Sharlene L; Patrício, Fernando B; Brandão, Marcos Antônio F; Raposo, Nádia R B
2016-01-25
The objective of this study was to evaluate the feasibility of 10 commonly used active pharmaceutical ingredients (APIs) compounded in oral suspensions using an internationally used suspending vehicle (SyrSpend(®) SF PH4 liquid): (i) amlodipine, (as besylate) 1.0mg/mL; (ii) chloroquine phosphate,15.0 mg/mL; (iii) dapsone, 2.0 mg/mL; (iv) phenytoin, 15.0 mg/mL; (v) pyridoxine hydrochloride, 50.0 mg/mL; (vi) sulfadiazine, 100.0 mg/mL; (vii) sulfasalazine, 100.0 mg/mL; (viii) tetracycline hydrochloride, 25.0 mg/mL; (ix) trimethoprim, 10.0 mg/mL; and (x) zonisamide, 10.0 mg/mL. All suspensions were stored both at controlled refrigeration (2-8 °C) and controlled room temperature (20-25 °C). Feasibility was assessed by measuring the percent recovery at varying time points throughout a 90-day period. API quantification was performed by high-performance liquid chromatography (HPLC-UV), via a stability-indicating method. Given the percentage of recovery of the APIs within the suspensions, the expiration date of the final products (API+vehicle) was at least 90 days for all suspensions with regard to both the controlled temperatures. This suggests that the vehicle is stable for compounding APIs from different pharmacological classes. Copyright © 2015 Elsevier B.V. All rights reserved.
Liu, Hao; Wang, Zi-Long; Tian, Liu-Qing; Qin, Qiu-Hong; Wu, Xiao-Bo; Yan, Wei-Yu; Zeng, Zhi-Jiang
2014-08-30
Apis mellifera and Apis cerana are two sibling species of Apidae. Apis cerana is adept at collecting sporadic nectar in mountain and forest region and exhibits stiffer hardiness and acarid resistance as a result of natural selection, whereas Apis mellifera has the advantage of producing royal jelly. To identify differentially expressed genes (DEGs) that affect the development of hypopharyngeal gland (HG) and/or the secretion of royal jelly between these two honeybee species, we performed a digital gene expression (DGE) analysis of the HGs of these two species at three developmental stages (newly emerged worker, nurse and forager). Twelve DGE-tag libraries were constructed and sequenced using the total RNA extracted from the HGs of newly emerged workers, nurses, and foragers of Apis mellifera and Apis cerana. Finally, a total of 1482 genes in Apis mellifera and 1313 in Apis cerana were found to exhibit an expression difference among the three developmental stages. A total of 1417 DEGs were identified between these two species. Of these, 623, 1072, and 462 genes showed an expression difference at the newly emerged worker, nurse, and forager stages, respectively. The nurse stage exhibited the highest number of DEGs between these two species and most of these were found to be up-regulated in Apis mellifera. These results suggest that the higher yield of royal jelly in Apis mellifera may be due to the higher expression level of these DEGs. In this study, we investigated the DEGs between the HGs of two sibling honeybee species (Apis mellifera and Apis cerana). Our results indicated that the gene expression difference was associated with the difference in the royal jelly yield between these two species. These results provide an important clue for clarifying the mechanisms underlying hypopharyngeal gland development and the production of royal jelly.
Code of Federal Regulations, 2014 CFR
2014-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Code of Federal Regulations, 2012 CFR
2012-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Code of Federal Regulations, 2013 CFR
2013-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Code of Federal Regulations, 2011 CFR
2011-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Li, Bo; Ren, Hui; Yue, Ping; Chen, Mingwei; Khuri, Fadlo R; Sun, Shi-Yong
2012-04-01
API-1 (pyrido[2,3-d]pyrimidines) is a novel small-molecule inhibitor of Akt, which acts by binding to Akt and preventing its membrane translocation and has promising preclinical antitumor activity. In this study, we reveal a novel function of API-1 in regulation of cellular FLICE-inhibitory protein (c-FLIP) levels and TRAIL-induced apoptosis, independent of Akt inhibition. API-1 effectively induced apoptosis in tested cancer cell lines including activation of caspase-8 and caspase-9. It reduced the levels of c-FLIP without increasing the expression of death receptor 4 (DR4) or DR5. Accordingly, it synergized with TRAIL to induce apoptosis. Enforced expression of ectopic c-FLIP did not attenuate API-1-induced apoptosis but inhibited its ability to enhance TRAIL-induced apoptosis. These data indicate that downregulation of c-FLIP mediates enhancement of TRAIL-induced apoptosis by API-1 but is not sufficient for API-1-induced apoptosis. API-1-induced reduction of c-FLIP could be blocked by the proteasome inhibitor MG132. Moreover, API-1 increased c-FLIP ubiquitination and decreased c-FLIP stability. These data together suggest that API-1 downregulates c-FLIP by facilitating its ubiquitination and proteasome-mediated degradation. Because other Akt inhibitors including API-2 and MK2206 had minimal effects on reducing c-FLIP and enhancement of TRAIL-induced apoptosis, it is likely that API-1 reduces c-FLIP and enhances TRAIL-induced apoptosis independent of its Akt-inhibitory activity. 2012 AACR
Lakshman, Jay P; Cao, Yu; Kowalski, James; Serajuddin, Abu T M
2008-01-01
Formulation of active pharmaceutical ingredients (API) in high-energy amorphous forms is a common strategy to enhance solubility, dissolution rate and, consequently, oral bioavailability of poorly water-soluble drugs. Amorphous APIs are, however, susceptible to recrystallization and, therefore, there is a need to physically stabilize them as solid dispersions in polymeric carriers. Hot melt extrusion has in recent years gained wide acceptance as a method of choice for the preparation of solid dispersions. There is a potential that the API, the polymer or both may degrade if excessively high temperature is needed in the melt extrusion process, especially when the melting point of the API is high. This report details a novel method where the API was first converted to an amorphous form by solvent evaporation and then melt-extruded with a suitable polymer at a drug load of at least 20% w/w. By this means, melt extrusion could be performed much below the melting temperature of the drug substance. Since the glass transition temperature of the amorphous drug was lower than that of the polymer used, the drug substance itself served as the plasticizer for the polymer. The addition of surfactants in the matrix enhanced dispersion and subsequent dissolution of the drug in aqueous media. The amorphous melt extrusion formulations showed higher bioavailability than formulations containing the crystalline API. There was no conversion of amorphous solid to its crystalline form during accelerated stability testing of dosage forms.
Bhugra, Chandan; Telang, Chitra; Schwabe, Robert; Zhong, Li
2016-09-06
API-polymer interactions, used to select the right polymeric matrix with an aim to stabilize an amorphous dispersion, are routinely studied using spectroscopic and/or calorimetric techniques (i.e., melting point depression). An alternate selection tool has been explored to rank order polymers for formation of stable amorphous dispersions as a pragmatic method for polymer selection. Reduced crystallization temperature of API, a parameter introduced by Zhou et al.,1 was utilized in this study for rank ordering interactions in API-polymeric systems. The trends in reduced crystallization temperature monitored over polymer concentration range of up to 20% polymer loading were utilized to calculate "crystallization parameter" or CP for two model systems (nifedipine and BI ABC). The rank order of CP, i.e., a measure of API-polymer interaction, for nifedipine followed the order PVP > PVP-VA > Soluplus > HPMCAS > PV Ac > PAA. This rank ordering was correlated to published results of molecular interactions and physical stability for nifedipine. A different rank ordering was observed for BI ABC: PAA > PVP > HPMCAS > Soluplus > PVPV-VA > PVAc. Interactions for BI ABC were not as differentiated when compared to nifedipine based on CP trends. BI ABC dispersions at drug loadings between 40 and 60% were physically stable for prolonged periods under ICH conditions as well as accelerated stress. We propose that large CP differences among polymers could be predictive of stability outcomes. Acceptable stability at pharmaceutically relevant drug loadings would suggest that the relative influence of downstream processes, such as polymer solubility in various solvents, process suitability and selection, and more importantly supersaturation potential, should be higher compared to stability considerations while developing compounds like BI ABC.
Context-Based Mobile Security Enclave
2012-09-01
29 c. Change IMSI .............................30 d. Change CellID ...........................31 e. Change Geolocation ...Assisted Global Positioning System ADB Android Debugger API Application Programming Interface APK Android Application Package BSC Base Station...Programming Interfaces ( APIs ), which use Java compatible libraries based on Apache Harmony (an open source Java implementation developed by the Apache
Code of Federal Regulations, 2013 CFR
2013-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
Code of Federal Regulations, 2014 CFR
2014-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
Code of Federal Regulations, 2012 CFR
2012-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
Code of Federal Regulations, 2011 CFR
2011-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
MetNetAPI: A flexible method to access and manipulate biological network data from MetNet
2010-01-01
Background Convenient programmatic access to different biological databases allows automated integration of scientific knowledge. Many databases support a function to download files or data snapshots, or a webservice that offers "live" data. However, the functionality that a database offers cannot be represented in a static data download file, and webservices may consume considerable computational resources from the host server. Results MetNetAPI is a versatile Application Programming Interface (API) to the MetNetDB database. It abstracts, captures and retains operations away from a biological network repository and website. A range of database functions, previously only available online, can be immediately (and independently from the website) applied to a dataset of interest. Data is available in four layers: molecular entities, localized entities (linked to a specific organelle), interactions, and pathways. Navigation between these layers is intuitive (e.g. one can request the molecular entities in a pathway, as well as request in what pathways a specific entity participates). Data retrieval can be customized: Network objects allow the construction of new and integration of existing pathways and interactions, which can be uploaded back to our server. In contrast to webservices, the computational demand on the host server is limited to processing data-related queries only. Conclusions An API provides several advantages to a systems biology software platform. MetNetAPI illustrates an interface with a central repository of data that represents the complex interrelationships of a metabolic and regulatory network. As an alternative to data-dumps and webservices, it allows access to a current and "live" database and exposes analytical functions to application developers. Yet it only requires limited resources on the server-side (thin server/fat client setup). The API is available for Java, Microsoft.NET and R programming environments and offers flexible query and broad data- retrieval methods. Data retrieval can be customized to client needs and the API offers a framework to construct and manipulate user-defined networks. The design principles can be used as a template to build programmable interfaces for other biological databases. The API software and tutorials are available at http://www.metnetonline.org/api. PMID:21083943
Terahertz absorption spectra of commonly used antimalarial drugs
NASA Astrophysics Data System (ADS)
Bawuah, Prince; Zeitler, J. Axel; Ketolainen, Jarkko; Peiponen, Kai-Erik
2018-06-01
Terahertz (THz) spectra from the pure forms [i.e. the active pharmaceutical ingredients (APIs)] of four commonly used antimalarial drugs are reported. The well-defined spectral fingerprints obtained for these APIs in the spectral range of 0.1 THz-3 THz show the sensitivity of the THz time-domain spectroscopic (THz-TDS) method for screening antimalarial drugs. For identification purpose, two commercially available antimalarial tablets were detected. Clear spectral fingerprints of the APIs in the antimalarial tablets were obtained even amidst the several types of excipients present in the tablets. This observation further proves the high sensitivity of the THz techniques in tracking the presence or absence of API in a pharmaceutical tablet. We envisage that the spectral data obtained for these drugs can contribute to a spectroscopic database in the far infrared spectral region and hence support the modelling of THz sensing to differentiate between genuine and counterfeit antimalarial tablets.
Pisklak, Dariusz Maciej; Zielińska-Pisklak, Monika; Szeleszczuk, Łukasz
2016-11-20
Solid-state nuclear magnetic resonance (ssNMR) is a powerful and unique method for analyzing solid forms of the active pharmaceutical ingredients (APIs) directly in their original formulations. Unfortunately, despite their wide range of application, the ssNMR experiments often suffer from low sensitivity and peaks overlapping between API and excipients. To overcome these limitations, the crosspolarization inversion recovery method was successfully used. The differences in the spin-lattice relaxation time constants for hydrogen atoms T1(H) between API and excipients were employed in order to separate and discriminate their peaks in ssNMR spectra as well as to increase the intensity of API signals in low-dose formulations. The versatility of this method was demonstrated by different examples, including the excipients mixture and commercial solid dosage forms (e.g. granules and tablets). Copyright © 2016 Elsevier B.V. All rights reserved.
Terahertz absorption spectra of commonly used antimalarial drugs
NASA Astrophysics Data System (ADS)
Bawuah, Prince; Zeitler, J. Axel; Ketolainen, Jarkko; Peiponen, Kai-Erik
2018-03-01
Terahertz (THz) spectra from the pure forms [i.e. the active pharmaceutical ingredients (APIs)] of four commonly used antimalarial drugs are reported. The well-defined spectral fingerprints obtained for these APIs in the spectral range of 0.1 THz-3 THz show the sensitivity of the THz time-domain spectroscopic (THz-TDS) method for screening antimalarial drugs. For identification purpose, two commercially available antimalarial tablets were detected. Clear spectral fingerprints of the APIs in the antimalarial tablets were obtained even amidst the several types of excipients present in the tablets. This observation further proves the high sensitivity of the THz techniques in tracking the presence or absence of API in a pharmaceutical tablet. We envisage that the spectral data obtained for these drugs can contribute to a spectroscopic database in the far infrared spectral region and hence support the modelling of THz sensing to differentiate between genuine and counterfeit antimalarial tablets.
Integration of Experience API Into CDET’s E-Learning
2016-06-01
based on customers ’ actual usage on a transaction basis. Value-based Penetration Pricing • Market segments where buyers have high price...they need to accomplish the course learning objectives (see Figure 6). This method allows each student to customize their own learning experiences ... EXPERIENCE API INTO CDET’S E- LEARNING by Clayton C. MacAloney June 2016 Thesis Advisor: Man-Tak Shing Co-Advisor: Arijit Das THIS PAGE
Multilingual Speech and Language Processing
2003-04-01
client software handles the user end of the transaction. Historically, four clients were provided: e-mail, web, FrameMaker , and command line. By...command-line client and an API. The API allows integration of CyberTrans into a number of processes including word processing packages ( FrameMaker ...preservation and logging, and others. The available clients remain e-mail, Web and FrameMaker . Platforms include both Unix and PC for clients, with
In Vitro and In Vivo Anti-tumoral Effects of the Flavonoid Apigenin in Malignant Mesothelioma
Masuelli, Laura; Benvenuto, Monica; Mattera, Rosanna; Di Stefano, Enrica; Zago, Erika; Taffera, Gloria; Tresoldi, Ilaria; Giganti, Maria Gabriella; Frajese, Giovanni Vanni; Berardi, Ginevra; Modesti, Andrea; Bei, Roberto
2017-01-01
Malignant mesothelioma (MM) is a tumor arising from mesothelium. MM patients’ survival is poor. The polyphenol 4′,5,7,-trihydroxyflavone Apigenin (API) is a “multifunctional drug”. Several studies have demonstrated API anti-tumoral effects. However, little is known on the in vitro and in vivo anti-tumoral effects of API in MM. Thus, we analyzed the in vitro effects of API on cell proliferation, cell cycle regulation, pro-survival signaling pathways, apoptosis, and autophagy of human and mouse MM cells. We evaluated the in vivo anti-tumor activities of API in mice transplanted with MM #40a cells forming ascites. API inhibited in vitro MM cells survival, increased reactive oxygen species intracellular production and induced DNA damage. API activated apoptosis but not autophagy. API-induced apoptosis was sustained by the increase of Bax/Bcl-2 ratio, increase of p53 expression, activation of both caspase 9 and caspase 8, cleavage of PARP-1, and increase of the percentage of cells in subG1 phase. API treatment affected the phosphorylation of ERK1/2, JNK and p38 MAPKs in a cell-type specific manner, inhibited AKT phosphorylation, decreased c-Jun expression and phosphorylation, and inhibited NF-κB nuclear translocation. Intraperitoneal administration of API increased the median survival of C57BL/6 mice intraperitoneally transplanted with #40a cells and reduced the risk of tumor growth. Our findings may have important implications for the design of MM treatment using API. PMID:28674496
Fung, Scott; Gordon, Stuart C; Krastev, Zahary; Horban, Andrzej; Petersen, Jörg; Sperl, Jan; Gane, Edward; Jacobson, Ira M; Yee, Leland J; Dinh, Phillip; Martins, Eduardo B; Flaherty, John F; Kitrinos, Kathryn M; Dusheiko, Geoffrey; Trinh, Huy; Flisiak, Robert; Rustgi, Vinod K; Buti, Maria; Marcellin, Patrick
2015-02-01
We evaluated the antiviral response of Asian or Pacific Islander (API) patients with chronic hepatitis B (CHB) who had baseline high viral load (HVL), defined as pre-treatment hepatitis B virus (HBV) DNA ≥9 log10 copies/ml, following up to 288 weeks of tenofovir disoproxil fumarate (TDF) treatment. A total of 205 HBeAg-negative and HBeAg-positive self-described API patients received 48 weeks of TDF 300 mg (HVL n = 18) or adefovir dipivoxil 10 mg (HVL n = 15) in a blinded fashion, followed by open-label TDF for an additional 240 weeks. The proportions of HVL vs. non-HVL patients with HBV DNA <400 copies/ml were compared. Mean declines in HBV DNA were evaluated in API vs. non-API patients. Throughout the first 72 weeks of treatment, a smaller proportion of HVL API patients reached HBV DNA <400 copies/ml than non-HVL API patients. However, after this timepoint similar proportions of HVL and non-HVL API patients achieved HBV DNA <400 copies/ml (100% vs. 97%, respectively), which was maintained through week 288, where 92% of HVL patients and 99% of non-HVL API patients on treatment had HBV DNA <400 copies/ml. During the 288 weeks of treatment, API patients had similar mean HBV DNA declines as non-API patients, regardless of whether patients were HVL or non-HVL. No API HVL patient had persistent viremia at week 288. No resistance was detected among HVL or non-HVL patients. API patients with HVL CHB achieve HBV DNA <400 copies/ml with long-term TDF treatment; however, achieving viral suppression may take longer for HVL patients relative to non-HVL API patients. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Li, Li; Qian, Jun; Ou, Chun-Quan; Zhou, Ying-Xue; Guo, Cui; Guo, Yuming
2014-07-01
There is an increasing interest in spatial and temporal variation of air pollution and its association with weather conditions. We presented the spatial and temporal variation of Air Pollution Index (API) and examined the associations between API and meteorological factors during 2001-2011 in Guangzhou, China. A Seasonal-Trend Decomposition Procedure Based on Loess (STL) was used to decompose API. Wavelet analyses were performed to examine the relationships between API and several meteorological factors. Air quality has improved since 2005. APIs were highly correlated among five monitoring stations, and there were substantial temporal variations. Timescale-dependent relationships were found between API and a variety of meteorological factors. Temperature, relative humidity, precipitation and wind speed were negatively correlated with API, while diurnal temperature range and atmospheric pressure were positively correlated with API in the annual cycle. Our findings should be taken into account when determining air quality forecasts and pollution control measures. Copyright © 2014 Elsevier Ltd. All rights reserved.
Grevskott, Didrik Hjertaker; Svanevik, Cecilie Smith; Wester, Astrid Louise; Lunestad, Bjørn Tore
2016-12-01
Continuous European Union programmes with specified methods for enumeration of Escherichia coli in bivalves for human consumption are currently running. The objective of this research was to examine the species accuracy of the five times three tube Most Probable Number (MPN) EU reference method used for detection of E. coli in marine bivalves. Among 549 samples of bivalves harvested from Norwegian localities during 2014 and 2015, a total number of 200 bacterial isolates were prepared from randomly selected culture-positive bivalves. These presumptive E. coli isolates were characterized biochemically by the Analytical Profile Index (API) 20E, as well as by Matrix Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry (MALDI-TOF MS). The majority of isolates (90%) were identified as E. coli, by both API 20E and MALDI-TOF MS. Ten isolates (5%) were identified as Klebsiella pneumoniae, while one isolate was identified as K. oxytoca by both methods, whereas three isolates were identified as Acinetobacter baumannii, Citrobacter braakii, and Enterobacter cloacae, respectively. The identification of the remaining six isolates were not in compliance between the two methods. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Hsu, P. C.; Hsu, H. H.
2016-12-01
Changes in extratropical disturbance behavior could play an important role in climate dynamics and be responsible for a part of climate-related damage. However, robust observational evidence for long-term trends in the activity is still lacking, and understanding of how it is linked with climate phenomena is limited. In this study, we define an accumulated perturbation index (API) to quantify the variation in some scalar quantities of atmospheric disturbances. API measures the areas (e.g., % of total surface area of Earth) where a certain perturbation quantity exceeds the long-term mean value plus 0.5 standard deviations. This index reflects more realistically the ensemble impacts of a climate perturbation and/or trend (such as global warming and ENSO) on the extratropical disturbances, even though its impact on different regions might vary from year to year due to stochastic processes. API represents an integrated activity of extratropical disturbances at a given time relative to a long time span. API is calculated for the 5-day running mean and 10-30-day stream function fluctuations during DJF and JJA. The analysis reveals an increasing trend in API and variance of stream function, especially in the Southern Hemisphere. The findings suggest that atmospheric extratropical disturbances have strengthened in widening areas during the past six decades, even though there might not be robust trends in wave activity at regional scales. Whether the observed trends in API are associated with certain climate patterns is under investigation. Impact of global warming is likely one of the major sources for the increasing activity. The future change in API under global warming scenarios will be further studied by analyzing the projection of the CMIP5 models.
75 FR 58014 - Pipeline Safety: Information Collection Activity; Request for Comments
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-23
... detection systems must comply with the standards set out in American Petroleum Institute (API) publication API 1130. API 1130 requires operators to record and retain certain information regarding the operation and testing of CPM systems. Compliance with API 1130, including its recordkeeping requirements...
Restful API Architecture Based on Laravel Framework
NASA Astrophysics Data System (ADS)
Chen, Xianjun; Ji, Zhoupeng; Fan, Yu; Zhan, Yongsong
2017-10-01
Web service has been an industry standard tech for message communication and integration between heterogeneous systems. RESTFUL API has become mainstream web service development paradigm after SOAP, how to effectively construct RESTFUL API remains a research hotspots. This paper presents a development model of RESTFUL API construction based on PHP language and LARAVEL framework. The key technical problems that need to be solved during the construction of RESTFUL API are discussed, and implementation details based on LARAVEL are given.
Ionic liquids in drug delivery.
Shamshina, Julia L; Barber, Patrick S; Rogers, Robin D
2013-10-01
To overcome potential problems with solid-state APIs, such as polymorphism, solubility and bioavailability, pure liquid salt (ionic liquid) forms of active pharmaceutical ingredients (API-ILs) are considered here as a design strategy. After a critical review of the current literature, the recent development of the API-ILs strategy is presented, with a particular focus on the liquefaction of drugs. A variety of IL tools for control over the liquid salt state of matter are discussed including choice of counterion to produce an IL from a given API; the concept of oligomeric ions that enables liquefaction of solid ILs by changing the stoichiometry or complexity of the ions; formation of 'liquid co-crystals' where hydrogen bonding is the driving force in the liquefaction of a neutral acid-base complex; combining an IL strategy with the prodrug strategy to improve the delivery of solid APIs; using ILs as delivery agents via trapping a drug in a micelle and finally ILs designed with tunable hydrophilic-lipophilic balance that matches the structural requirements needed to solubilize poorly water-soluble APIs. The authors believe that API-IL approaches may save failed lead candidates, extend the patent life of current APIs, lead to new delivery options or even new pharmaceutical action. They encourage the pharmaceutical industry to invest more research into the API-IL platform as it could lead to fast-tracked approval based on similarities to the APIs already approved.
Banta, Edward R.; Poeter, Eileen P.; Doherty, John E.; Hill, Mary C.
2006-01-01
he Joint Universal Parameter IdenTification and Evaluation of Reliability Application Programming Interface (JUPITER API) improves the computer programming resources available to those developing applications (computer programs) for model analysis.The JUPITER API consists of eleven Fortran-90 modules that provide for encapsulation of data and operations on that data. Each module contains one or more entities: data, data types, subroutines, functions, and generic interfaces. The modules do not constitute computer programs themselves; instead, they are used to construct computer programs. Such computer programs are called applications of the API. The API provides common modeling operations for use by a variety of computer applications.The models being analyzed are referred to here as process models, and may, for example, represent the physics, chemistry, and(or) biology of a field or laboratory system. Process models commonly are constructed using published models such as MODFLOW (Harbaugh et al., 2000; Harbaugh, 2005), MT3DMS (Zheng and Wang, 1996), HSPF (Bicknell et al., 1997), PRMS (Leavesley and Stannard, 1995), and many others. The process model may be accessed by a JUPITER API application as an external program, or it may be implemented as a subroutine within a JUPITER API application . In either case, execution of the model takes place in a framework designed by the application programmer. This framework can be designed to take advantage of any parallel processing capabilities possessed by the process model, as well as the parallel-processing capabilities of the JUPITER API.Model analyses for which the JUPITER API could be useful include, for example: Compare model results to observed values to determine how well the model reproduces system processes and characteristics.Use sensitivity analysis to determine the information provided by observations to parameters and predictions of interest.Determine the additional data needed to improve selected model predictions.Use calibration methods to modify parameter values and other aspects of the model.Compare predictions to regulatory limits.Quantify the uncertainty of predictions based on the results of one or many simulations using inferential or Monte Carlo methods.Determine how to manage the system to achieve stated objectives.The capabilities provided by the JUPITER API include, for example, communication with process models, parallel computations, compressed storage of matrices, and flexible input capabilities. The input capabilities use input blocks suitable for lists or arrays of data. The input blocks needed for one application can be included within one data file or distributed among many files. Data exchange between different JUPITER API applications or between applications and other programs is supported by data-exchange files.The JUPITER API has already been used to construct a number of applications. Three simple example applications are presented in this report. More complicated applications include the universal inverse code UCODE_2005 (Poeter et al., 2005), the multi-model analysis MMA (Eileen P. Poeter, Mary C. Hill, E.R. Banta, S.W. Mehl, and Steen Christensen, written commun., 2006), and a code named OPR_PPR (Matthew J. Tonkin, Claire R. Tiedeman, Mary C. Hill, and D. Matthew Ely, written communication, 2006).This report describes a set of underlying organizational concepts and complete specifics about the JUPITER API. While understanding the organizational concept presented is useful to understanding the modules, other organizational concepts can be used in applications constructed using the JUPITER API.
An, Jianguo; Sun, Mingjiang; Bai, Lin; Chen, Ted; Liu, David Q; Kord, Alireza
2008-11-04
Derivatization LC/MS methodology has been developed for the determination of a group of commonly encountered alkyl esters of sulfonates or sulfates in drug substances at low ppm levels. This general method uses trimethylamine as the derivatizing reagent for ethyl/propyl/isopropyl esters and triethylamine for methyl esters. The resulting quaternary ammonium derivatization products are highly polar (ionic) and can be retained by a hydrophilic interaction liquid chromatography (HILIC) column and readily separated from the main interfering active pharmaceutical ingredient (API) peak that is usually present at very high concentration. The method gives excellent sensitivity for all the alkyl esters at typical target analyte level of 1-2 ppm when the API samples were prepared at 5mg/mL. The recoveries at 1-2 ppm were generally above 85% for all the alkyl esters in the various APIs tested. The injection precisions of the lowest concentration standards were excellent with R.S.D.=0.4-4%. A linear range for concentrations from 0.2 to 20 ppm has been established with R(2)>or=0.99. This general method has been tested in a number of API matrices and used successfully for determination of alkyl sulfonates or dialkyl sulfates in support of API batch releases at GlaxoSmithKline.
Yong, Yuk Lin; Plançon, Aline; Lau, Yen Hui; Hostetler, Dana M.; Fernández, Facundo M.; Green, Michael D.; Sounvoravong, Sourisak; Nara, Suon; Boravann, Mam; Dumrong, Thitikornkovit; Bangsawan, Nurjaya; Low, Min Yong; Lim, Chin-Chin; Ai, Ruth Lee Choo; Newton, Paul N.
2015-01-01
Counterfeit (or falsified) and substandard medicines pose a major public health risk. We describe the findings of Operation Storm I and II conducted in 2008–2009 to combat counterfeit medicines through partnership between national customs, Drug Regulatory Agencies (DRAs), and police in Cambodia, Indonesia, Laos, Myanmar, Singapore, Thailand, and Vietnam. Samples were obtained from seizures and market surveillance by national DRAs. Laboratory analysis using spectroscopic and chromatographic techniques and examination of packaging were performed. Ninety-three suspect antibiotics and 95 antimalarial samples were collected. Of the 93 antibiotics, 29 (31%) had % active pharmaceutical ingredient content (%API) < 85% or > 115% (including one counterfeit). Of the 95 antimalarials, 30 (32%) had %API < 85 > 115% API (including one counterfeit). A significant minority of samples, antimalarials (13%) and antibiotics (15%), were collected in plastic bags with minimal or no labeling. Of 20 ampicillin samples, 13 (65%) contained < 85% API (with one counterfeit containing additional amoxicillin). Of 34 oral artesunate samples, 7 (21%) contained %API out of the 85–115% range. Coordinated and synergistic partnership adopted by the participating countries, International Criminal Police Organization (INTERPOL), World Health Organization (WHO), and laboratories facilitated a platform for discussions and intelligence sharing, helping to improve each participating country's capacity to combat poor-quality medicines. PMID:25897069
Mao, Xiao-Yuan; Yu, Jing; Liu, Zhao-Qian; Zhou, Hong-Hao
2015-01-01
Our present investigation aimed to determine the neuroprotection of apigenin (API) against diabetes-associated cognitive decline (DACD) a diabetic rat model and exploring its potential mechanism. Diabetic rat model was induced by intraperitoneal injection of streptozotocin. All experiment animals treated with vehicle or API by doses of 10, 20 and 40 mg/kg for seven weeks. Firstly, the body weight and blood glucose levels were detected. We used Morris water maze test to evaluate learning and memory function. The oxidative indicators (malondialdehyde (MDA), superoxide dismutase (SOD) and glutathione (GSH)), cNOS, iNOS, caspase-3 and caspase-9 were measured in cerebral cortex and hippocampus using corresponding commercial kits. API can increase body weight, reduce the blood glucose levels, and improve the cognitive function in rats induced by diabetes. API decrease the MDA content, and increase SOD activity and GSH level of diabetic animals in the cerebral cortex and hippocampus of diabetic rats. Meanwhile, constitutive nitric oxide synthase (cNOS), inducible nitric oxide synthase (iNOS), caspase-3/9 were markedly exhibited in the cerebral cortex and hippocampus of diabetic rats. In summary, our current work discloses that API attenuates DACD in rats via suppressing oxidative stress, nitric oxide and apoptotic cascades synthase pathway. PMID:26629041
The Ruby UCSC API: accessing the UCSC genome database using Ruby.
Mishima, Hiroyuki; Aerts, Jan; Katayama, Toshiaki; Bonnal, Raoul J P; Yoshiura, Koh-ichiro
2012-09-21
The University of California, Santa Cruz (UCSC) genome database is among the most used sources of genomic annotation in human and other organisms. The database offers an excellent web-based graphical user interface (the UCSC genome browser) and several means for programmatic queries. A simple application programming interface (API) in a scripting language aimed at the biologist was however not yet available. Here, we present the Ruby UCSC API, a library to access the UCSC genome database using Ruby. The API is designed as a BioRuby plug-in and built on the ActiveRecord 3 framework for the object-relational mapping, making writing SQL statements unnecessary. The current version of the API supports databases of all organisms in the UCSC genome database including human, mammals, vertebrates, deuterostomes, insects, nematodes, and yeast.The API uses the bin index-if available-when querying for genomic intervals. The API also supports genomic sequence queries using locally downloaded *.2bit files that are not stored in the official MySQL database. The API is implemented in pure Ruby and is therefore available in different environments and with different Ruby interpreters (including JRuby). Assisted by the straightforward object-oriented design of Ruby and ActiveRecord, the Ruby UCSC API will facilitate biologists to query the UCSC genome database programmatically. The API is available through the RubyGem system. Source code and documentation are available at https://github.com/misshie/bioruby-ucsc-api/ under the Ruby license. Feedback and help is provided via the website at http://rubyucscapi.userecho.com/.
The Ruby UCSC API: accessing the UCSC genome database using Ruby
2012-01-01
Background The University of California, Santa Cruz (UCSC) genome database is among the most used sources of genomic annotation in human and other organisms. The database offers an excellent web-based graphical user interface (the UCSC genome browser) and several means for programmatic queries. A simple application programming interface (API) in a scripting language aimed at the biologist was however not yet available. Here, we present the Ruby UCSC API, a library to access the UCSC genome database using Ruby. Results The API is designed as a BioRuby plug-in and built on the ActiveRecord 3 framework for the object-relational mapping, making writing SQL statements unnecessary. The current version of the API supports databases of all organisms in the UCSC genome database including human, mammals, vertebrates, deuterostomes, insects, nematodes, and yeast. The API uses the bin index—if available—when querying for genomic intervals. The API also supports genomic sequence queries using locally downloaded *.2bit files that are not stored in the official MySQL database. The API is implemented in pure Ruby and is therefore available in different environments and with different Ruby interpreters (including JRuby). Conclusions Assisted by the straightforward object-oriented design of Ruby and ActiveRecord, the Ruby UCSC API will facilitate biologists to query the UCSC genome database programmatically. The API is available through the RubyGem system. Source code and documentation are available at https://github.com/misshie/bioruby-ucsc-api/ under the Ruby license. Feedback and help is provided via the website at http://rubyucscapi.userecho.com/. PMID:22994508
Yang, Xiaojing; Xiong, Xuewu; Cao, Ji; Luan, Baolei; Liu, Yongjun; Liu, Guozhu; Zhang, Lei
2015-01-30
Matrix interference, which can lead to false positive/negative results, contamination of injector or separation column, incompatibility between sample solution and the selected analytical instrument, and response inhibition or even quenching, is commonly suffered for the analysis of trace level toxic impurities in drug substance. In this study, a simple matrix precipitation strategy is proposed to eliminate or minimize the above stated matrix interference problems. Generally, a sample of active pharmaceutical ingredients (APIs) is dissolved in an appropriate solvent to achieve the desired high concentration and then an anti-solvent is added to precipitate the matrix substance. As a result, the target analyte is extracted into the mixed solution with very less residual of APIs. This strategy has the characteristics of simple manipulation, high recovery and excellent anti-interference capability. It was found that the precipitation ratio (R, representing the ability to remove matrix substance) and the proportion of solvent (the one used to dissolve APIs) in final solution (P, affecting R and also affecting the method sensitivity) are two important factors of the precipitation process. The correlation between R and P was investigated by performing precipitation with various APIs in different solvent/anti-solvent systems. After a detailed mathematical reasoning process, P=20% was proved to be an effective and robust condition to perform the precipitation strategy. The precipitation method with P=20% can be used as a general strategy for toxic impurity analysis in APIs. Finally, several typical examples are described in this article, where the challenging matrix interference issues have been resolved successfully. Copyright © 2014 Elsevier B.V. All rights reserved.
Detecting Runtime Anomalies in AJAX Applications through Trace Analysis
2011-08-10
statements by adding the instrumentation to the GWT UI classes, leaving the user code untouched. Some content management frameworks such as Drupal [12...Google web toolkit.” http://code.google.com/webtoolkit/. [12] “Form generation – drupal api.” http://api.drupal.org/api/group/form_api/6. 9
Multi-Robot Systems in Military Domains (Les Systemes Multi-Robots Dans les Domaines Militaires)
2008-12-01
to allow him to react quickly to improve his personal safety , it is mandatory to shorten the current very long delay needed for the human operator to...Hard RT tasks 2 OS / API Process monitoring 3 H / API Flexible communication medium 4 H / API Networking capabilities 5 H / API Safety 6 API...also be considered between high level services and legacy systems. 4) This is the one of the basic requirement for CoRoDe. 5) Safety : CRC, Timeouts
Klee, Julia; Besana, Andrea M; Genersch, Elke; Gisder, Sebastian; Nanetti, Antonio; Tam, Dinh Quyet; Chinh, Tong Xuan; Puerta, Francisco; Ruz, José Maria; Kryger, Per; Message, Dejair; Hatjina, Fani; Korpela, Seppo; Fries, Ingemar; Paxton, Robert J
2007-09-01
The economically most important honey bee species, Apis mellifera, was formerly considered to be parasitized by one microsporidian, Nosema apis. Recently, [Higes, M., Martín, R., Meana, A., 2006. Nosema ceranae, a new microsporidian parasite in honeybees in Europe, J. Invertebr. Pathol. 92, 93-95] and [Huang, W.-F., Jiang, J.-H., Chen, Y.-W., Wang, C.-H., 2007. A Nosema ceranae isolate from the honeybee Apis mellifera. Apidologie 38, 30-37] used 16S (SSU) rRNA gene sequences to demonstrate the presence of Nosema ceranae in A. mellifera from Spain and Taiwan, respectively. We developed a rapid method to differentiate between N. apis and N. ceranae based on PCR-RFLPs of partial SSU rRNA. The reliability of the method was confirmed by sequencing 29 isolates from across the world (N =9 isolates gave N. apis RFLPs and sequences, N =20 isolates gave N. ceranae RFLPs and sequences; 100% correct classification). We then employed the method to analyze N =115 isolates from across the world. Our data, combined with N =36 additional published sequences demonstrate that (i) N. ceranae most likely jumped host to A. mellifera, probably within the last decade, (ii) that host colonies and individuals may be co-infected by both microsporidia species, and that (iii) N. ceranae is now a parasite of A. mellifera across most of the world. The rapid, long-distance dispersal of N. ceranae is likely due to transport of infected honey bees by commercial or hobbyist beekeepers. We discuss the implications of this emergent pathogen for worldwide beekeeping.
Diagnosis and treatment of limb fractures associated with acute peripheral ischemia.
Popescu, G I; Lupescu, O; Nagea, M; Patru, C
2013-01-01
Acute Peripheral Ischemia (API) is the most severe acute complication after both open and closed fractures, as ischemia compromises not only the vitality of the affected limb, but also the patient's life, because metabolic anaerobic changes following ischemia have serious local and general consequences. These explain why early diagnosis of API is very important for the prognosis of the traumatized limb.The authors analyse cases when API was not diagnosed immediately after trauma, but some time after the first examination, due to either low systolic BP or to late onset of API. The patients were analysed concerning the type of the fracture, the reason for delayed diagnosis of API, the moment of API diagnosis and the arterial injury. In all those cases, surgery was performed immediately after API diagnosis, in order to identify and treat the complex injuries(bone and vascular). Celsius.
Nyenje, Mirriam E.; Odjadjare, Collins E.; Tanih, Nicoline F.; Green, Ezekiel; Ndip, Roland N.
2012-01-01
This study assessed the microbiological quality of various ready-to-eat foods sold in Alice, South Africa. Microbiological analysis was conducted on 252 samples which included vegetables, potatoes, rice, pies, beef and chicken stew. The isolates were identified using biochemical tests and the API 20E, API 20NE and API Listeria kits; results were analyzed using the one-way-ANOVA test. Bacterial growth was present in all the food types tested; high levels of total aerobic count were observed in vegetables, 6.8 ± 0.07 followed by rice, 6.7 ± 1.7 while pies had the lowest count (2.58 ± 0.24). Organisms isolated included: Listeria spp. (22%), Enterobacter spp. (18%), Aeromonas hydrophila (12%), Klebsiella oxytoca (8%), Proteus mirabilis (6.3%), Staphylococcus aureus (3.2%) and Pseudomonas luteola (2.4%). Interestingly, Salmonella spp. and Escherichia coli were not isolated in any of the samples. There was a statistically significant difference (p < 0.05) in the prevalence of foodborne pathogens from hygienic and unhygienic cafeterias. The results indicated that most of the ready-to-eat food samples examined in this study did not meet bacteriological quality standards, therefore posing potential risks to consumers. This should draw the attention of the relevant authorities to ensure that hygienic standards are improved to curtain foodborne infections. PMID:23066386
USDA-ARS?s Scientific Manuscript database
Nosema ceranae infection is ubiquitous in western honey bees, Apis mellifera. In the US, displacement of N. apis in bee colonies suggests that N. ceranae has competitive advantages. Our study, however, showed that N. ceranae was significantly less infective and less virulent than N. apis in commerc...
47 CFR 61.46 - Adjustments to the API.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 47 Telecommunication 3 2014-10-01 2014-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... cap local exchange carrier must calculate an API for each affected basket pursuant to the following...
47 CFR 61.46 - Adjustments to the API.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 47 Telecommunication 3 2012-10-01 2012-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... cap local exchange carrier must calculate an API for each affected basket pursuant to the following...
47 CFR 61.46 - Adjustments to the API.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... cap local exchange carrier must calculate an API for each affected basket pursuant to the following...
47 CFR 61.46 - Adjustments to the API.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... carrier must calculate an API for each affected basket pursuant to the following methodology: APIt = APIt...
47 CFR 61.46 - Adjustments to the API.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 47 Telecommunication 3 2013-10-01 2013-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... cap local exchange carrier must calculate an API for each affected basket pursuant to the following...
Compositional mining of multiple object API protocols through state abstraction.
Dai, Ziying; Mao, Xiaoguang; Lei, Yan; Qi, Yuhua; Wang, Rui; Gu, Bin
2013-01-01
API protocols specify correct sequences of method invocations. Despite their usefulness, API protocols are often unavailable in practice because writing them is cumbersome and error prone. Multiple object API protocols are more expressive than single object API protocols. However, the huge number of objects of typical object-oriented programs poses a major challenge to the automatic mining of multiple object API protocols: besides maintaining scalability, it is important to capture various object interactions. Current approaches utilize various heuristics to focus on small sets of methods. In this paper, we present a general, scalable, multiple object API protocols mining approach that can capture all object interactions. Our approach uses abstract field values to label object states during the mining process. We first mine single object typestates as finite state automata whose transitions are annotated with states of interacting objects before and after the execution of the corresponding method and then construct multiple object API protocols by composing these annotated single object typestates. We implement our approach for Java and evaluate it through a series of experiments.
Compositional Mining of Multiple Object API Protocols through State Abstraction
Mao, Xiaoguang; Qi, Yuhua; Wang, Rui; Gu, Bin
2013-01-01
API protocols specify correct sequences of method invocations. Despite their usefulness, API protocols are often unavailable in practice because writing them is cumbersome and error prone. Multiple object API protocols are more expressive than single object API protocols. However, the huge number of objects of typical object-oriented programs poses a major challenge to the automatic mining of multiple object API protocols: besides maintaining scalability, it is important to capture various object interactions. Current approaches utilize various heuristics to focus on small sets of methods. In this paper, we present a general, scalable, multiple object API protocols mining approach that can capture all object interactions. Our approach uses abstract field values to label object states during the mining process. We first mine single object typestates as finite state automata whose transitions are annotated with states of interacting objects before and after the execution of the corresponding method and then construct multiple object API protocols by composing these annotated single object typestates. We implement our approach for Java and evaluate it through a series of experiments. PMID:23844378
NASA Astrophysics Data System (ADS)
Dong, Shihao; Wen, Ping; Zhang, Qi; Li, Xinyu; Tan, Ken; Nieh, James
2017-03-01
In highly social bees, queen mandibular pheromone (QMP) is vital for colony life. Both Apis cerana (Ac) and Apis mellifera (Am) share an evolutionarily conserved set of QMP compounds: (E)-9-oxodec-2-enoic acid (9-ODA), (E)-9-hydroxydec-2-enoic acid (9-HDA), (E)-10-hydroxy-dec-2-enoic acid (10-HDA), 10-hydroxy-decanoic acid (10-HDAA), and methyl p-hydroxybenzoate (HOB) found at similar levels. However, evidence suggests there may be species-specific sensitivity differences to QMP compounds because Ac workers have higher levels of ovarian activation than Am workers. Using electroantennograms, we found species-specific sensitivity differences for a blend of the major QMP compounds and three individual compounds (9-HDA, 10-HDAA, and 10-HDA). As predicted, Am was more sensitive than Ac in all cases (1.3- to 2.7- fold higher responses). There were also species differences in worker retinue attraction to three compounds (9-HDA, HOB, and 10-HDA). In all significantly different cases, Am workers were 4.5- to 6.2-fold more strongly attracted than Ac workers were. Thus, Ac workers responded less strongly to QMP than Ac workers, and 9-HDA and 10-HDA consistently elicited stronger antennal and retinue formation responses.
Dong, Shihao; Wen, Ping; Zhang, Qi; Li, Xinyu; Tan, Ken; Nieh, James
2017-03-15
In highly social bees, queen mandibular pheromone (QMP) is vital for colony life. Both Apis cerana (Ac) and Apis mellifera (Am) share an evolutionarily conserved set of QMP compounds: (E)-9-oxodec-2-enoic acid (9-ODA), (E)-9-hydroxydec-2-enoic acid (9-HDA), (E)-10-hydroxy-dec-2-enoic acid (10-HDA), 10-hydroxy-decanoic acid (10-HDAA), and methyl p-hydroxybenzoate (HOB) found at similar levels. However, evidence suggests there may be species-specific sensitivity differences to QMP compounds because Ac workers have higher levels of ovarian activation than Am workers. Using electroantennograms, we found species-specific sensitivity differences for a blend of the major QMP compounds and three individual compounds (9-HDA, 10-HDAA, and 10-HDA). As predicted, Am was more sensitive than Ac in all cases (1.3- to 2.7- fold higher responses). There were also species differences in worker retinue attraction to three compounds (9-HDA, HOB, and 10-HDA). In all significantly different cases, Am workers were 4.5- to 6.2-fold more strongly attracted than Ac workers were. Thus, Ac workers responded less strongly to QMP than Am workers, and 9-HDA and 10-HDA consistently elicited stronger antennal and retinue formation responses [corrected].
Sipos, Barbara; Pintye-Hódi, Klára; Kónya, Zoltán; Kelemen, András; Regdon, Géza; Sovány, Tamás
2017-02-25
Titanate nanotube (TNT) has recently been explored as a new carrier material for active pharmaceutical ingredients (API). The aim of the present work was to reveal the physicochemical properties of API-TNT composites, focusing on the interactions between the TNTs and the incorporated APIs. Drugs belonging to different Biopharmaceutical Classification System (BCS) classes were loaded into TNTs: diltiazem hydrochloride (BCS I.), diclofenac sodium (BCS II.), atenolol (BCS III.) and hydrochlorothiazide (BCS IV.). Experimental results demonstrated that it is feasible for spiral cross-sectioned titanate nanotubes to carry drugs and maintain their bioactivity. The structural properties of the composites were characterized by a range of analytical techniques, including FT-IR, DSC, TG-MS, etc. The interactions between APIs and TNTs were identified as electrostatic attractions, mainly dominated by hydrogen bonds. Based on the results, it can be stated that the strength of the association depends on the hydrogen donor strength of the API. The drug release of incorporated APIs was evaluated from compressed tablets and compared to that of pure APIs. Differences noticed in the dissolution profiles due to incorporation showed a correlation with the strength of interactions between the APIs and the TNTs observed in the above analytical studies. Copyright © 2016 Elsevier B.V. All rights reserved.
Somanathan, Hema; Warrant, Eric J; Borges, Renee M; Wallén, Rita; Kelber, Almut
2009-08-01
Bees of the genus Apis are important foragers of nectar and pollen resources. Although the European honeybee, Apis mellifera, has been well studied with respect to its sensory abilities, learning behaviour and role as pollinators, much less is known about the other Apis species. We studied the anatomical spatial resolution and absolute sensitivity of the eyes of three sympatric species of Asian honeybees, Apis cerana, Apis florea and Apis dorsata and compared them with the eyes of A. mellifera. Of these four species, the giant honeybee A. dorsata (which forages during moonlit nights) has the lowest spatial resolution and the most sensitive eyes, followed by A. mellifera, A. cerana and the dwarf honeybee, A. florea (which has the smallest acceptance angles and the least sensitive eyes). Moreover, unlike the strictly diurnal A. cerana and A. florea, A. dorsata possess large ocelli, a feature that it shares with all dim-light bees. However, the eyes of the facultatively nocturnal A. dorsata are much less sensitive than those of known obligately nocturnal bees such as Megalopta genalis in Panama and Xylocopa tranquebarica in India. The differences in sensitivity between the eyes of A. dorsata and other strictly diurnal Apis species cannot alone explain why the former is able to fly, orient and forage at half-moon light levels. We assume that additional neuronal adaptations, as has been proposed for A. mellifera, M. genalis and X. tranquebarica, might exist in A. dorsata.
Li, Meng; Gogos, Costas G; Ioannidis, Nicolas
2015-01-15
The dissolution rate of the active pharmaceutical ingredients in pharmaceutical hot-melt extrusion is the most critical elementary step during the extrusion of amorphous solid solutions - total dissolution has to be achieved within the short residence time in the extruder. Dissolution and dissolution rates are affected by process, material and equipment variables. In this work, we examine the effect of one of the material variables and one of the equipment variables, namely, the API particle size and extruder screw configuration on the API dissolution rate, in a co-rotating, twin-screw extruder. By rapidly removing the extruder screws from the barrel after achieving a steady state, we collected samples along the length of the extruder screws that were characterized by polarized optical microscopy (POM) and differential scanning calorimetry (DSC) to determine the amount of undissolved API. Analyses of samples indicate that reduction of particle size of the API and appropriate selection of screw design can markedly improve the dissolution rate of the API during extrusion. In addition, angle of repose measurements and light microscopy images show that the reduction of particle size of the API can improve the flowability of the physical mixture feed and the adhesiveness between its components, respectively, through dry coating of the polymer particles by the API particles. Copyright © 2014. Published by Elsevier B.V.
Harting, Julia; Kleinebudde, Peter
2018-04-01
Raman spectroscopy was evaluated as a process analytical technology (PAT) tool for continuous API quantification during twin-screw wet granulation. Therefore, a Raman probe was implemented in front of the granulator barrel. This setup enabled the collection of Raman spectra upon a constant granule flow. To develop an in-line PLS calibration model, eight binary mixtures of the API and lactose monohydrate with API contents between 5 and 50% were pre-blended and granulated in a twin-screw granulator with a screw speed of 150 rpm and a powder feed rate of 40 g/min. Water was used as a granulation liquid with different liquid to solid ratios depending on the API content. Ibuprofen and diclofenac sodium were chosen as model drugs and separated PLS models were built for each API. The predictive performance of the developed PLS models was determined by granulating and monitoring new test samples containing different API concentrations. This evaluation showed that the models were able to predict the API concentration with an RMSEP of 0.59% for ibuprofen and 1.5% for diclofenac sodium. In a second part, the developed in-line Raman spectroscopic method was used to determine the API concentration during a split feeding process. Therefore, the API and lactose monohydrate were added by two independently adjustable feeders into the twin-screw granulator barrel. The in-line spectroscopy analysis which was verified by UV-analysis indicated that the mixing ability of the twin-screw granulator was good for the used settings and all adjusted API concentrations. Copyright © 2018 Elsevier B.V. All rights reserved.
Gisder, Sebastian; Schüler, Vivian; Horchler, Lennart L; Groth, Detlef; Genersch, Elke
2017-01-01
The Western honey bee ( Apis mellifera ) is widely used as commercial pollinator in worldwide agriculture and, therefore, plays an important role in global food security. Among the parasites and pathogens threatening health and survival of honey bees are two species of microsporidia, Nosema apis and Nosema ceranae. Nosema ceranae is considered an emerging pathogen of the Western honey bee. Reports on the spread of N. ceranae suggested that this presumably highly virulent species is replacing its more benign congener N. apis in the global A. mellifera population. We here present a 12 year longitudinal cohort study on the prevalence of N. apis and N. ceranae in Northeast Germany. Between 2005 and 2016, a cohort of about 230 honey bee colonies originating from 23 apiaries was sampled twice a year (spring and autumn) resulting in a total of 5,600 bee samples which were subjected to microscopic and molecular analysis for determining the presence of infections with N. apis or/and N. ceranae . Throughout the entire study period, both N. apis - and N. ceranae -infections could be diagnosed within the cohort. Logistic regression analysis of the prevalence data demonstrated a significant increase of N. ceranae -infections over the last 12 years, both in autumn (reflecting the development during the summer) and in spring (reflecting the development over winter) samples. Cell culture experiments confirmed that N. ceranae has a higher proliferative potential than N. apis at 27° and 33°C potentially explaining the increase in N. ceranae prevalence during summer. In autumn, characterized by generally low infection prevalence, this increase was accompanied by a significant decrease in N. apis -infection prevalence. In contrast, in spring, the season with a higher prevalence of infection, no significant decrease of N. apis infections despite a significant increase in N. ceranae infections could be observed. Therefore, our data do not support a general advantage of N. ceranae over N. apis and an overall replacement of N. apis by N. ceranae in the studied honey bee population.
Gisder, Sebastian; Schüler, Vivian; Horchler, Lennart L.; Groth, Detlef; Genersch, Elke
2017-01-01
The Western honey bee (Apis mellifera) is widely used as commercial pollinator in worldwide agriculture and, therefore, plays an important role in global food security. Among the parasites and pathogens threatening health and survival of honey bees are two species of microsporidia, Nosema apis and Nosema ceranae. Nosema ceranae is considered an emerging pathogen of the Western honey bee. Reports on the spread of N. ceranae suggested that this presumably highly virulent species is replacing its more benign congener N. apis in the global A. mellifera population. We here present a 12 year longitudinal cohort study on the prevalence of N. apis and N. ceranae in Northeast Germany. Between 2005 and 2016, a cohort of about 230 honey bee colonies originating from 23 apiaries was sampled twice a year (spring and autumn) resulting in a total of 5,600 bee samples which were subjected to microscopic and molecular analysis for determining the presence of infections with N. apis or/and N. ceranae. Throughout the entire study period, both N. apis- and N. ceranae-infections could be diagnosed within the cohort. Logistic regression analysis of the prevalence data demonstrated a significant increase of N. ceranae-infections over the last 12 years, both in autumn (reflecting the development during the summer) and in spring (reflecting the development over winter) samples. Cell culture experiments confirmed that N. ceranae has a higher proliferative potential than N. apis at 27° and 33°C potentially explaining the increase in N. ceranae prevalence during summer. In autumn, characterized by generally low infection prevalence, this increase was accompanied by a significant decrease in N. apis-infection prevalence. In contrast, in spring, the season with a higher prevalence of infection, no significant decrease of N. apis infections despite a significant increase in N. ceranae infections could be observed. Therefore, our data do not support a general advantage of N. ceranae over N. apis and an overall replacement of N. apis by N. ceranae in the studied honey bee population. PMID:28730143
Shalgunov, Vladimir; Zaytseva-Zotova, Daria; Zintchenko, Arkadi; Levada, Tatiana; Shilov, Yuri; Andreyev, Dmitry; Dzhumashev, Dzhangar; Metelkin, Evgeny; Urusova, Alexandra; Demin, Oleg; McDonnell, Kevin; Troiano, Greg; Zale, Stephen; Safarovа, Elmira
2017-09-10
Nanoparticles made of polylactide-poly(ethylene glycol) block-copolymer (PLA-PEG) are promising vehicles for drug delivery due to their biodegradability and controllable payload release. However, published data on the drug delivery properties of PLA-PEG nanoparticles are heterogeneous in terms of nanoparticle characteristics and mostly refer to low injected doses (a few mg nanoparticles per kg body weight). We have performed a comprehensive study of the biodistribution of nanoparticle formulations based on PLA-PEG nanoparticles of ~100nm size at injected doses of 30 to 140mg/kg body weight in healthy rats and nude tumor-bearing mice. Nanoparticle formulations differed by surface PEG coverage and by release kinetics of the encapsulated model active pharmaceutical ingredient (API). Increase in PEG coverage prolonged nanoparticle circulation half-life up to ~20h in rats and ~10h in mice and decreased retention in liver, spleen and lungs. Circulation half-life of the encapsulated API grew monotonously as the release rate slowed down. Plasma and tissue pharmacokinetics was dose-linear for inactive nanoparticles, but markedly dose-dependent for the model therapeutic formulation, presumably because of the toxic effects of released API. A mathematical model of API distribution calibrated on the data for inactive nanoparticles and conventional API form correctly predicted the distribution of the model therapeutic formulation at the lowest investigated dose, but for higher doses the toxic action of the released API had to be explicitly modelled. Our results provide a coherent illustration of the ability of controllable-release PLA-PEG nanoparticles to serve as an effective drug delivery platform to alter API biodistribution. They also underscore the importance of physiological effects of released drug in determining the biodistribution of therapeutic drug formulations at doses approaching tolerability limits. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.
USDA-ARS?s Scientific Manuscript database
Two stereochemical variant insect kinin mimetic analogs 1796 and 1797 containing (2S,4S)-APy (APy) and (2R,4S)-APy (Apy), respectively, were synthesized and evaluated on isolated Malpighian tubules of the house cricket Acheta domesticus to determine if they could retain the fluid secretion stimulat...
Web Services--A Buzz Word with Potentials
János T. Füstös
2006-01-01
The simplest definition of a web service is an application that provides a web API. The web API exposes the functionality of the solution to other applications. The web API relies on other Internet-based technologies to manage communications. The resulting web services are pervasive, vendor-independent, language-neutral, and very low-cost. The main purpose of a web API...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Paulson, Patrick R.; Gibson, Tara D.; Schuchardt, Karen L.
2008-03-01
Requirements for the provenance store and access API are developed. Existing RDF stores and APIs are evaluated against the requirements and performance benchmarks. The team’s conclusion is to use MySQL as a database backend, with a possible move to Oracle in the near-term future. Both Jena and Sesame’s APIs will be supported, but new code will use the Jena API
PedVizApi: a Java API for the interactive, visual analysis of extended pedigrees.
Fuchsberger, Christian; Falchi, Mario; Forer, Lukas; Pramstaller, Peter P
2008-01-15
PedVizApi is a Java API (application program interface) for the visual analysis of large and complex pedigrees. It provides all the necessary functionality for the interactive exploration of extended genealogies. While available packages are mostly focused on a static representation or cannot be added to an existing application, PedVizApi is a highly flexible open source library for the efficient construction of visual-based applications for the analysis of family data. An extensive demo application and a R interface is provided. http://www.pedvizapi.org
A Monte Carlo modeling alternative for the API Gamma Ray Calibration Facility.
Galford, J E
2017-04-01
The gamma ray pit at the API Calibration Facility, located on the University of Houston campus, defines the API unit for natural gamma ray logs used throughout the petroleum logging industry. Future use of the facility is uncertain. An alternative method is proposed to preserve the gamma ray API unit definition as an industry standard by using Monte Carlo modeling to obtain accurate counting rate-to-API unit conversion factors for gross-counting and spectral gamma ray tool designs. Copyright © 2017 Elsevier Ltd. All rights reserved.
Mechanical Characteristics of Submerged Arc Weldment in API Gas Pipeline Steel of Grade X65
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hashemi, S. H.; Mohammadyani, D.
The mechanical properties of submerged arc weldment (SAW) in gas transportation pipeline steel of grade API X65 (65 ksi yield strength) were investigated. This steel is produced by thermo mechanical control rolled (TMC), and is largely used in Iran gas piping systems and networks. The results from laboratory study on three different regions; i.e. base metal (BM), fusion zone (FZ) and heat affected zone (HAZ) were used to compare weldment mechanical characteristics with those specified by API 5L (revision 2004) standard code. Different laboratory experiments were conducted on test specimens taken from 48 inch outside diameter and 14.3 mm wallmore » thickness gas pipeline. The test results showed a gradient of microstructure and Vickers hardness data from the centerline of FZ towards the unaffected MB. Similarly, lower Charpy absorbed energy (compared to BM) was observed in the FZ impact specimens. Despite this, the API specifications were fulfilled in three tested zones, ensuring pipeline structural integrity under working conditions.« less
Li, Zhiguo; Li, Meng; He, Jingfang; Zhao, Xiaomeng; Chaimanee, Veeranan; Huang, Wei-Fone; Nie, Hongyi; Zhao, Yazhou; Su, Songkun
2017-08-01
Acute toxicities (LD50s) of imidacloprid and clothianidin to Apis mellifera and A. cerana were investigated. Changing patterns of immune-related gene expressions and the activities of four enzymes between the two bee species were compared and analyzed after exposure to sublethal doses of insecticides. Results indicated that A. cerana was more sensitive to imidacloprid and clothianidin than A. mellifera. The acute oral LD50 values of imidacloprid and clothianidin for A. mellifera were 8.6 and 2.0ng/bee, respectively, whereas the corresponding values for A. cerana were 2.7 and 0.5ng/bee. The two bee species possessed distinct abilities to mount innate immune response against neonicotinoids. After 48h of imidacloprid treatment, carboxylesterase (CCE), prophenol oxidase (PPO), and acetylcholinesterase (AChE) activities were significantly downregulated in A. mellifera but were upregulated in A. cerana. Glutathione-S-transferase (GST) activity was significantly elevated in A. mellifera at 48h after exposure to imidacloprid, but no significant change was observed in A. cerana. AChE was downregulated in both bee species at three different time points during clothianidin exposure, and GST activities were upregulated in both species exposed to clothianidin. Different patterns of immune-related gene expression and enzymatic activities implied distinct detoxification and immune responses of A. cerana and A. mellifera to imidacloprid and clothianidin. Copyright © 2017 Elsevier Inc. All rights reserved.
Berninger, Jason P; LaLone, Carlie A; Villeneuve, Daniel L; Ankley, Gerald T
2016-04-01
The potential for pharmaceuticals in the environment to cause adverse ecological effects is of increasing concern. Given the thousands of active pharmaceutical ingredients (APIs) that can enter the aquatic environment through human and/or animal (e.g., livestock) waste, a current challenge in aquatic toxicology is identifying those that pose the greatest risk. Because empirical toxicity information for aquatic species is generally lacking for pharmaceuticals, an important data source for prioritization is that generated during the mammalian drug development process. Applying concepts of species read-across, mammalian pharmacokinetic data were used to systematically prioritize APIs by estimating their potential to cause adverse biological consequences to aquatic organisms, using fish as an example. Mammalian absorption, distribution, metabolism, and excretion (ADME) data (e.g., peak plasma concentration, apparent volume of distribution, clearance rate, and half-life) were collected and curated, creating the Mammalian Pharmacokinetic Prioritization For Aquatic Species Targeting (MaPPFAST) database representing 1070 APIs. From these data, a probabilistic model and scoring system were developed and evaluated. Individual APIs and therapeutic classes were ranked based on clearly defined read-across assumptions for translating mammalian-derived ADME parameters to estimate potential hazard in fish (i.e., greatest predicted hazard associated with lowest mammalian peak plasma concentrations, total clearance and highest volume of distribution, half-life). It is anticipated that the MaPPFAST database and the associated API prioritization approach will help guide research and/or inform ecological risk assessment. Published 2015 Wiley Periodicals Inc. on behalf of SETAC. This article is a US Government work and, as such, is in the public domain in the United States of America.
49 CFR 195.3 - Incorporation by reference.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Fittings Industry, Inc. (MSS), 127 Park Street, NE., Vienna, VA 22180. 5. American Society for Testing and...)) §§ 195.205(b)(1); 195.432(b). (12) API Standard 1104, “Welding of Pipelines and Related Facilities” (20th....307(e). (7) 2007 ASME Boiler & Pressure Vessel Code, Section IX: “Qualification Standard for Welding...
Trementozzi, Andrea N; Leung, Cheuk-Yui; Osei-Yeboah, Frederick; Irdam, Erwin; Lin, Yiqing; MacPhee, J Michael; Boulas, Pierre; Karki, Shyam B; Zawaneh, Peter N
2017-05-15
Optimizing powder flow and compaction properties are critical for ensuring a robust tablet manufacturing process. The impact of flow and compaction properties of the active pharmaceutical ingredient (API) becomes progressively significant for higher drug load formulations, and for scaling up manufacturing processes. This study demonstrated that flow properties of a powder blend can be improved through API particle engineering, without critically impacting blend tabletability at elevated drug loadings. In studying a jet milled API (D 50 =24μm) and particle engineered wet milled API (D 50 =70μm and 90μm), flow functions of all API lots were similarly poor despite the vast difference in average particle size (ff c <4). This finding strays from the common notion that powder flow properties are directly correlated to particle size distribution. Upon adding excipients, however, clear trends in flow functions based on API particle size were observed. Wet milled API blends had a much improved flow function (ff c >10) compared with the jet milled API blends. Investigation of the compaction properties of both wet and jet milled powder blends also revealed that both jet and wet milled material produced robust tablets at the drug loadings used. The ability to practically demonstrate this uncommon observation that similarly poor flowing APIs can lead to a marked difference upon blending is important for pharmaceutical development. It is especially important in early phase development during API selection, and is advantageous particularly when material-sparing techniques are utilized. Copyright © 2017 Elsevier B.V. All rights reserved.
Environmental Models as a Service: Enabling Interoperability ...
Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantage of streamlined deployment processes and affordable cloud access to move algorithms and data to the web for discoverability and consumption. In these deployments, environmental models can become available to end users through RESTful web services and consistent application program interfaces (APIs) that consume, manipulate, and store modeling data. RESTful modeling APIs also promote discoverability and guide usability through self-documentation. Embracing the RESTful paradigm allows models to be accessible via a web standard, and the resulting endpoints are platform- and implementation-agnostic while simultaneously presenting significant computational capabilities for spatial and temporal scaling. RESTful APIs present data in a simple verb-noun web request interface: the verb dictates how a resource is consumed using HTTP methods (e.g., GET, POST, and PUT) and the noun represents the URL reference of the resource on which the verb will act. The RESTful API can self-document in both the HTTP response and an interactive web page using the Open API standard. This lets models function as an interoperable service that promotes sharing, documentation, and discoverability. Here, we discuss the
Calcareous microfossil-based orbital cyclostratigraphy in the Arctic Ocean
Marzen, Rachel; DeNinno, Lauren H.; Cronin, Thomas M.
2016-01-01
Microfaunal and geochemical proxies from marine sediment records from central Arctic Ocean (CAO) submarine ridges suggest a close relationship over the last 550 thousand years (kyr) between orbital-scale climatic oscillations, sea-ice cover, marine biological productivity and other parameters. Multiple paleoclimate proxies record glacial to interglacial cycles. To understand the climate-cryosphere-productivity relationship, we examined the cyclostratigraphy of calcareous microfossils and constructed a composite Arctic Paleoclimate Index (API) "stack" from benthic foraminiferal and ostracode density from 14 sediment cores. Following the hypothesis that API is driven mainly by changes in sea-ice related productivity, the API stack shows the Arctic experienced a series of highly productive interglacials and interstadials every ∼20 kyr. These periods signify minimal ice shelf and sea-ice cover and maximum marine productivity. Rapid transitions in productivity are seen during shifts from interglacial to glacial climate states. Discrepancies between the Arctic API curves and various global climatic, sea-level and ice-volume curves suggest abrupt growth and decay of Arctic ice shelves related to climatic and sea level oscillations.
Public evaluation of an announcement of public interests communicated by an AIDS patient.
Lau, J T; Cheung, C K
1999-01-01
Announcements of public interests (APIs) on television (TV) have been an important means of AIDS prevention. Recently in Hong Kong, the first API on TV which was communicated by a male AIDS patient, named J.J., was displayed on the screen from April to December, 1995. The objective of this study is to examine the effectiveness of this API, as compared with other APIs previously shown in Hong Kong. Collecting data from a random sample of 1,275 residential respondents in Hong Kong through a telephone survey, this study demonstrated that the public gave very favorable evaluation on J.J.'s API, when compared with other APIs. Remarkable impacts of J.J.'s API on the public included increasing concern for AIDS, condom use, and testing blood for HIV infection, and reducing the number of sex partners. The impacts tended to be more salient on male than female viewers. Some of these impacts also appeared to vary by different levels of education and family income.
GIANT API: an application programming interface for functional genomics
Roberts, Andrew M.; Wong, Aaron K.; Fisk, Ian; Troyanskaya, Olga G.
2016-01-01
GIANT API provides biomedical researchers programmatic access to tissue-specific and global networks in humans and model organisms, and associated tools, which includes functional re-prioritization of existing genome-wide association study (GWAS) data. Using tissue-specific interaction networks, researchers are able to predict relationships between genes specific to a tissue or cell lineage, identify the changing roles of genes across tissues and uncover disease-gene associations. Additionally, GIANT API enables computational tools like NetWAS, which leverages tissue-specific networks for re-prioritization of GWAS results. The web services covered by the API include 144 tissue-specific functional gene networks in human, global functional networks for human and six common model organisms and the NetWAS method. GIANT API conforms to the REST architecture, which makes it stateless, cacheable and highly scalable. It can be used by a diverse range of clients including web browsers, command terminals, programming languages and standalone apps for data analysis and visualization. The API is freely available for use at http://giant-api.princeton.edu. PMID:27098035
Programmatic access to logical models in the Cell Collective modeling environment via a REST API.
Kowal, Bryan M; Schreier, Travis R; Dauer, Joseph T; Helikar, Tomáš
2016-01-01
Cell Collective (www.cellcollective.org) is a web-based interactive environment for constructing, simulating and analyzing logical models of biological systems. Herein, we present a Web service to access models, annotations, and simulation data in the Cell Collective platform through the Representational State Transfer (REST) Application Programming Interface (API). The REST API provides a convenient method for obtaining Cell Collective data through almost any programming language. To ensure easy processing of the retrieved data, the request output from the API is available in a standard JSON format. The Cell Collective REST API is freely available at http://thecellcollective.org/tccapi. All public models in Cell Collective are available through the REST API. For users interested in creating and accessing their own models through the REST API first need to create an account in Cell Collective (http://thecellcollective.org). thelikar2@unl.edu. Technical user documentation: https://goo.gl/U52GWo. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Can the Air Pollution Index be used to communicate the health risks of air pollution?
Li, Li; Lin, Guo-Zhen; Liu, Hua-Zhang; Guo, Yuming; Ou, Chun-Quan; Chen, Ping-Yan
2015-10-01
The validity of using the Air Pollution Index (API) to assess health impacts of air pollution and potential modification by individual characteristics on air pollution effects remain uncertain. We applied distributed lag non-linear models (DLNMs) to assess associations of daily API, specific pollution indices for PM10, SO2, NO2 and the weighted combined API (APIw) with mortality during 2003-2011 in Guangzhou, China. An increase of 10 in API was associated with a 0.88% (95% confidence interval (CI): 0.50, 1.27%) increase of non-accidental mortality at lag 0-2 days. Harvesting effects appeared after 2 days' exposure. The effect estimate of API over lag 0-15 days was statistically significant and similar with those of pollutant-specific indices and APIw. Stronger associations between API and mortality were observed in the elderly, females and residents with low educational attainment. In conclusion, the API can be used to communicate health risks of air pollution. Copyright © 2015 Elsevier Ltd. All rights reserved.
Müller, U; Schmid-Grendelmeier, P; Hausmann, O; Helbling, A
2012-08-01
Diagnostic tests in patients with Hymenoptera venom allergy are frequently positive to venoms of both honey bee and wasp (Vespula). Component-resolved analysis with recombinant species-specific major allergens (rSSMA) may help to distinguish true double sensitization from crossreactivity. Included were 121 patients with systemic allergic reactions to Hymenoptera stings, 76 with double positivity of serum-specific IgE (sIgE) to both venoms, 45 with single positivity to bee or wasp venom, and 32 controls without history of systemic reactions to Hymenoptera stings and no sIgE to whole venoms. In venom-allergic patients and controls, sIgE to rSSMA Api m 1 of bee venom and to Ves v 1 and Ves v 5 of wasp venom were tested by ImmunoCAP. Only 47% of 76 patients with double positivity to whole venoms reacted also to rSSMA of both species. Specificity of sIgE to the 3 rSSMA was very high, with no sIgE to rSSMA of the other species in single-positive venom-allergic patients and only one control with low sIgE to Ves v 1. All wasp-allergic single-positive patients had sIgE to Ves v 5 and/or Ves v 1, and 78.3% of single-positive bee venom-allergic patients had sIgE to Api m 1. Specificity of sIgE to rSSMA of both species is excellent. Sensitivity of sIgE to rSSMA was optimal for wasp venom. Sensitivity of bee venom Api m 1 could be increased by adding rSSMA of other important bee venom allergens. © 2012 John Wiley & Sons A/S.
Govindarajan, Ramprakash; Landis, Margaret; Hancock, Bruno; Gatlin, Larry A; Suryanarayanan, Raj; Shalaev, Evgenyi Y
2015-04-01
The objectives of this study were to measure the apparent surface acidity of common excipients and to correlate the acidity with the chemical stability of an acid-sensitive active pharmaceutical ingredient (API) in binary API-excipient powder mixtures. The acidity of 26 solid excipients was determined by two methods, (i) by measuring the pH of their suspensions or solutions and (ii) the pH equivalent (pHeq) measured via ionization of probe molecules deposited on the surface of the excipients. The chemical stability of an API, atorvastatin calcium (AC), in mixtures with the excipients was evaluated by monitoring the appearance of an acid-induced degradant, atorvastatin lactone, under accelerated storage conditions. The extent of lactone formation in AC-excipient mixtures was presented as a function of either solution/suspension pH or pHeq. No lactone formation was observed in mixtures with excipients having pHeq > 6, while the lactone levels were pronounced (> 0.6% after 6 weeks at 50°C/20% RH) with excipients exhibiting pHeq < 3. The three pHeq regions (> 6, 3-6, and < 3) were consistent with the reported solution pH-stability profile of AC. In contrast to the pHeq scale, lactone formation did not show any clear trend when plotted as a function of the suspension/solution pH. Two mechanisms to explain the discrepancy between the suspension/solution pH and the chemical stability data were discussed. Acidic excipients, which are expected to be incompatible with an acid-sensitive API, were identified based on pHeq measurements. The incompatibility prediction was confirmed in the chemical stability tests using AC as an example of an acid-sensitive API.
Koop, G; De Visscher, A; Collar, C A; Bacon, D A C; Maga, E A; Murray, J D; Supré, K; De Vliegher, S; Haesebrouck, F; Rowe, J D; Nielen, M; van Werven, T
2012-12-01
Coagulase-negative staphylococci (CNS) are the most commonly isolated bacteria from goat milk, but they have often been identified with phenotypic methods, which may have resulted in misclassification. The aims of this paper were to assess the amount of misclassification of a phenotypic test for identifying CNS species from goat milk compared with transfer RNA intergenic spacer PCR (tDNA-PCR) followed by capillary electrophoresis, and to apply the tDNA-PCR technique on different capillary electrophoresis equipment. Milk samples were collected from 416 does in 5 Californian dairy goat herds on 3 occasions during lactation. In total, 219 CNS isolates were identified at the species level with tDNA-PCR and subjected to the API 20 Staph identification test kit (API Staph; bioMérieux, Durham, NC). If the same species was isolated multiple times from the same udder gland, only the first isolate was used for further analyses, resulting in 115 unique CNS isolates. According to the tDNA-PCR test, the most prevalent CNS species were Staphylococcus epidermidis, Staphylococcus caprae, and Staphylococcus simulans. Typeability with API staph was low (72%). Although the API Staph test was capable of identifying the majority of Staph. epidermidis and Staph. caprae isolates, sensitivity for identification of Staph. simulans was low. The true positive fraction was high for the 3 most prevalent species. It was concluded that the overall performance of API Staph in differentiating CNS species from goat milk was moderate to low, mainly because of the low typeability, and that genotypic methods such as tDNA-PCR are preferred. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Hutchinson, Thomas H.; Madden, Judith C.; Naidoo, Vinny; Walker, Colin H.
2014-01-01
Human and veterinary drug development addresses absorption, distribution, metabolism, elimination and toxicology (ADMET) of the Active Pharmaceutical Ingredient (API) in the target species. Metabolism is an important factor in controlling circulating plasma and target tissue API concentrations and in generating metabolites which are more easily eliminated in bile, faeces and urine. The essential purpose of xenobiotic metabolism is to convert lipid-soluble, non-polar and non-excretable chemicals into water soluble, polar molecules that are readily excreted. Xenobiotic metabolism is classified into Phase I enzymatic reactions (which add or expose reactive functional groups on xenobiotic molecules), Phase II reactions (resulting in xenobiotic conjugation with large water-soluble, polar molecules) and Phase III cellular efflux transport processes. The human–fish plasma model provides a useful approach to understanding the pharmacokinetics of APIs (e.g. diclofenac, ibuprofen and propranolol) in freshwater fish, where gill and liver metabolism of APIs have been shown to be of importance. By contrast, wildlife species with low metabolic competency may exhibit zero-order metabolic (pharmacokinetic) profiles and thus high API toxicity, as in the case of diclofenac and the dramatic decline of vulture populations across the Indian subcontinent. A similar threat looms for African Cape Griffon vultures exposed to ketoprofen and meloxicam, recent studies indicating toxicity relates to zero-order metabolism (suggesting P450 Phase I enzyme system or Phase II glucuronidation deficiencies). While all aspects of ADMET are important in toxicity evaluations, these observations demonstrate the importance of methods for predicting API comparative metabolism as a central part of environmental risk assessment. PMID:25405970
A Shellcode Detection Method Based on Full Native API Sequence and Support Vector Machine
NASA Astrophysics Data System (ADS)
Cheng, Yixuan; Fan, Wenqing; Huang, Wei; An, Jing
2017-09-01
Dynamic monitoring the behavior of a program is widely used to discriminate between benign program and malware. It is usually based on the dynamic characteristics of a program, such as API call sequence or API call frequency to judge. The key innovation of this paper is to consider the full Native API sequence and use the support vector machine to detect the shellcode. We also use the Markov chain to extract and digitize Native API sequence features. Our experimental results show that the method proposed in this paper has high accuracy and low detection rate.
Efficient Strategies for Active Interface-Level Network Topology Discovery
2013-09-01
Network Information Centre API Application Programming Interface APNIC Asia-Pacific Network Information Centre ARIN American Registry for Internet Numbers...very convenient Application Programming Interface ( API ) for easy primitive implementation. Ark’s API facilitates easy development and rapid...prototyping – important attributes as the char- acteristics of our primitives evolve. The API allows a high-level of abstraction, which in turn leads to rapid
USDA-ARS?s Scientific Manuscript database
The objective of this study was to provide initial results in an application of single-step genomic BLUP with a genomic relationship matrix (G^-1APY) calculated using the Algorithm of Proven and Young (APY) to 305-day protein yield for US Holsteins. Two G^-1APY were tested; one was from 139,057 geno...
Curtin, Vincent; Amharar, Youness; Hu, Yun; Erxleben, Andrea; McArdle, Patrick; Caron, Vincent; Tajber, Lidia; Corrigan, Owen I; Healy, Anne Marie
2013-01-07
The coprocessing of active pharmaceutical ingredient (API) with an excipient which has a high glass transition temperature (T(g)) is a recognized strategy to stabilize the amorphous form of a drug. This work investigates whether coprocessing a model API, sulfadimidine (SDM) with a series of low T(g) excipients, prevents or reduces amorphization of the crystalline drug. It was hypothesized that these excipients could exert a T(g) lowering effect, resulting in composite T(g) values lower than that of the API alone and promote crystallization of the drug. Milled SDM and comilled SDM with glutaric acid (GA), adipic acid (AA), succinic acid (SA), and malic acid (MA) were characterized with respect to their thermal, X-ray diffraction, spectroscopic, and vapor sorption properties. SDM was predominantly amorphous when milled alone, with an amorphous content of 82%. No amorphous content was detected by dynamic vapor sorption (DVS) on comilling SDM with 50% w/w GA, and amorphous content of the API was reduced by almost 30%, relative to the API milled alone, on comilling with 50% w/w AA. In contrast, amorphization of SDM was promoted on comilling with 50% w/w SA and MA, as indicated by near-infrared (NIR) spectroscopy. Results indicated that the API was completely amorphized in the SDM:MA comilled composite. The saturated solubility of GA and AA in the amorphous API was estimated by thermal methods. It was observed that the T(g) of the comelt quenched composites reached a minimum and leveled out at this solubility concentration. Maximum crystallinity of API on comilling was reached at excipient concentrations comparable to the saturated concentration solubility of excipient in the API. Moreover, the closer the Hildebrand solubility parameter of the excipient to the API, the greater the inhibition of API amorphization on comilling. The results reported here indicate that an excipient with a low T(g) coupled with high solubility in the API can prevent or reduce the generation of an amorphous phase on comilling.
interPopula: a Python API to access the HapMap Project dataset
2010-01-01
Background The HapMap project is a publicly available catalogue of common genetic variants that occur in humans, currently including several million SNPs across 1115 individuals spanning 11 different populations. This important database does not provide any programmatic access to the dataset, furthermore no standard relational database interface is provided. Results interPopula is a Python API to access the HapMap dataset. interPopula provides integration facilities with both the Python ecology of software (e.g. Biopython and matplotlib) and other relevant human population datasets (e.g. Ensembl gene annotation and UCSC Known Genes). A set of guidelines and code examples to address possible inconsistencies across heterogeneous data sources is also provided. Conclusions interPopula is a straightforward and flexible Python API that facilitates the construction of scripts and applications that require access to the HapMap dataset. PMID:21210977
A Fine-Grained API Link Prediction Approach Supporting CMDA Mashup Recommendation
NASA Astrophysics Data System (ADS)
Zhang, J.; Bao, Q.; Lee, T. J.; Ramachandran, R.; Lee, S.; Pan, L.; Gatlin, P. N.; Maskey, M.
2017-12-01
Service (API) discovery and recommendation is key to the wide spread of service oriented architecture and service oriented software engineering. Service recommendation typically relies on service linkage prediction calculated by the semantic distances (or similarities) among services based on their collection of inherent attributes. Given a specific context (mashup goal), however, different attributes may contribute differently to a service linkage. In this work, instead of training a model for all attributes as a whole, a novel approach is presented to simultaneously train separate models for individual attributes. Our contributions are summarized in three-fold. First is that we have developed a scalable attribute-level data model, featuring scalability and extensibility. We have extended Multiplicative Attribute Graph (MAG) model to represent node profiles featuring rich categorical attributes, while relaxing its constraint of requiring a priori knowledge of predefined attributes. LDA is leveraged to dynamically identify attributes based on attribute modeling, and multiple Gaussian fit is applied to find global optimal values. The second contribution is that we have seamlessly integrated the latent relationships between API attributes as well as observed network structure based on historical API usage data. Such a layered information model enables us to predict the probability of a link between two APIs based on their attribute link affinities carrying a variety of information including meta data, semantic data, historical usage data, as well as crowdsourcing user comments and annotations. The third contribution is that we have developed a finegrained context-aware mashup-API recommendation technique. On top of individual models trained for separate attributes, a dedicated layer is trained to represent the latent attribute distribution regarding mashup purpose, i.e., sensitivity of attributes to context. Thus, given the description of an intended mashup, the attributes sensitive to the goal will be identified, and corresponding attribute models will be exploited to compute the possibility of API linkages under the context. Such a layered model increases search accuracy.
Zhang, Cui; Li, Zhenkui; Cui, Huiting; Jiang, Yuanyuan; Yang, Zhenke; Wang, Xu; Gao, Han; Liu, Cong; Zhang, Shujia
2017-01-01
ABSTRACT Malaria parasites have a complex life cycle with multiple developmental stages in mosquito and vertebrate hosts, and different developmental stages express unique sets of genes. Unexpectedly, many transcription factors (TFs) commonly found in eukaryotic organisms are absent in malaria parasites; instead, a family of genes encoding proteins similar to the plant Apetala2 (ApiAP2) transcription factors is expanded in the parasites. Several malaria ApiAP2 genes have been shown to play a critical role in parasite development; however, the functions of the majority of the ApiAP2 genes remain to be elucidated. In particular, no study on the Plasmodium yoelii ApiAP2 (PyApiAP2) gene family has been reported so far. This study systematically investigated the functional roles of PyApiAP2 genes in parasite development. Twenty-four of the 26 PyApiAP2 genes were selected for disruption, and 12 were successfully knocked out using the clustered regularly interspaced short palindromic repeat–CRISPR-associated protein 9 (CRISPR-Cas9) method. The effects of gene knockout (KO) on parasite development in mouse and mosquito stages were evaluated. Ten of 12 successfully disrupted genes, including two genes that have not been functionally characterized in any Plasmodium species previously, were shown to be critical for P. yoelii development of sexual and mosquito stages. Additionally, seven of the genes were labeled for protein expression analysis, revealing important information supporting their functions. This study represents the first systematic functional characterization of the P. yoelii ApiAP2 gene family and discovers important insights on the roles of the ApiAP2 genes in parasite development. PMID:29233900
NASA Astrophysics Data System (ADS)
Zhang, Jie; Tan, Gai-Xiu; Liu, Bao-Lin; Dai, Yu-Bei; Xu, Na; Wen, Wei-Fen; Cao, Chong; Xiao, Hong-Ping
2017-05-01
Five Ag(I) coordination complexes, namely, [Ag6(2-stp)2(3-methyl-2-apy)3·H2O]n (1), [Ag3(2-stp)(4-methyl-2-apy)3]n (2), [Na2Ag18(2-stp)4(2-Hstp)4(5-methyl-2-apy)16 (H2O)4·11H2O]n (3), Ag3(2-stp)(6-methy-2-apy)4·H2O (4), and [Ag6(2-stp)2(6-methyl-2-apy)8(H2O)2·H2O]n (5) (2-NaH2stp = 2-sulfoterephthalic acid monosodium salt, 3-methyl-2-apy = 3-methyl-2-aminopyridine, 4-methyl-2-apy = 4-methyl-2-aminopyridine, 5-methyl-2-apy = 5-methyl-2-aminopyridine, 6-methyl-2-apy = 6-methyl-2-aminopyridine), have been synthesized and structurally characterized. Complexes 1 and 2 show two-dimensional network. In complex 3, the adjacent Ag10 units are bridged by 5-methyl-2-apy ligands to form a 2D infinite undulated sheet. Adjacent 2D sheets are linked by coordinative bonds between carboxylic oxygen atoms and Na(I) ions to form a 3D coordination polymer. Complex 4 is a 0-D discrete trinuclear molecule, and the self-complementary the Osbnd H⋯O and Nsbnd H⋯O hydrogen bonds incorporating hydrogen bond motifs extend these molecules into a 2D supramolecular framework. Compound 5 exhibits 1D-chain structure. However, complex 5 shows 3D supramolecular structure results from the linkage of neighboring layers through a rich hydrogen-bonding between uncoordinated sulfonates, amino groups and coordinated carboxylates. The thermogravimetric analyses and photoluminescence of the complexes were also investigated.
The geospatial data quality REST API for primary biodiversity data
Otegui, Javier; Guralnick, Robert P.
2016-01-01
Summary: We present a REST web service to assess the geospatial quality of primary biodiversity data. It enables access to basic and advanced functions to detect completeness and consistency issues as well as general errors in the provided record or set of records. The API uses JSON for data interchange and efficient parallelization techniques for fast assessments of large datasets. Availability and implementation: The Geospatial Data Quality API is part of the VertNet set of APIs. It can be accessed at http://api-geospatial.vertnet-portal.appspot.com/geospatial and is already implemented in the VertNet data portal for quality reporting. Source code is freely available under GPL license from http://www.github.com/vertnet/api-geospatial. Contact: javier.otegui@gmail.com or rguralnick@flmnh.ufl.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:26833340
The geospatial data quality REST API for primary biodiversity data.
Otegui, Javier; Guralnick, Robert P
2016-06-01
We present a REST web service to assess the geospatial quality of primary biodiversity data. It enables access to basic and advanced functions to detect completeness and consistency issues as well as general errors in the provided record or set of records. The API uses JSON for data interchange and efficient parallelization techniques for fast assessments of large datasets. The Geospatial Data Quality API is part of the VertNet set of APIs. It can be accessed at http://api-geospatial.vertnet-portal.appspot.com/geospatial and is already implemented in the VertNet data portal for quality reporting. Source code is freely available under GPL license from http://www.github.com/vertnet/api-geospatial javier.otegui@gmail.com or rguralnick@flmnh.ufl.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.
Hahm, Hyeouk Chris; Song, In Han; Ozonoff, Al; Sassani, Jessica C
2009-01-01
To describe the proportion of HIV testing in the past 12 months among sexually experienced Asian and Pacific Islander (API) women and to investigate to what extent routine gynecologic care (RGC) increases HIV testing among API women. Data were derived from Wave III of the National Longitudinal Study of Adolescent Health (Add Health). Analyses were limited to 7,576 sexually experienced women (White, n = 4,482 [68.5%]; Black, n = 1,693 [25.6%]; Hispanic, n = 923 [13.9%]; API, n = 478 [7.2%]) aged 18-27 years. Multiple logistic regression analyses were used to estimate the association between RGC and HIV testing after controlling for predisposing, need, and enabling factors. On average, 22.8% (n = 1,504) of sexually experienced women reported HIV testing in the past year. API women had the lowest proportion of testing (17.2%), and Black women had the highest (26.2%). Overall, 60.2% of API women reported receiving RGC; however, only 15.5% of API who received RGC reported HIV testing. After controlling for covariates, significantly positive associations were found for White, Black, and Hispanic women between RGC and HIV testing; however, there was no evidence that RGC was associated with HIV testing among API women. Our data suggest that RGC does not [corrected] increase HIV testing among API women. To eliminate disparities in HIV testing service utilization among API women, appropriate efforts should be directed to better understand the barriers and facilitators of HIV testing among this population.
Influence of humidity on the phase behavior of API/polymer formulations.
Prudic, Anke; Ji, Yuanhui; Luebbert, Christian; Sadowski, Gabriele
2015-08-01
Amorphous formulations of APIs in polymers tend to absorb water from the atmosphere. This absorption of water can induce API recrystallization, leading to reduced long-term stability during storage. In this work, the phase behavior of different formulations was investigated as a function of relative humidity. Indomethacin and naproxen were chosen as model APIs and poly(vinyl pyrrolidone) (PVP) and poly(vinyl pyrrolidone-co-vinyl acetate) (PVPVA64) as excipients. The formulations were prepared by spray drying. The water sorption in pure polymers and in formulations was measured at 25°C and at different values of relative humidity (RH=25%, 50% and 75%). Most water was absorbed in PVP-containing systems, and water sorption was decreasing with increasing API content. These trends could also be predicted in good agreement with the experimental data using the thermodynamic model PC-SAFT. Furthermore, the effect of absorbed water on API solubility in the polymer and on the glass-transition temperature of the formulations was predicted with PC-SAFT and the Gordon-Taylor equation, respectively. The absorbed water was found to significantly decrease the API solubility in the polymer as well as the glass-transition temperature of the formulation. Based on a quantitative modeling of the API/polymer phase diagrams as a function of relative humidity, appropriate API/polymer compositions can now be selected to ensure long-term stable amorphous formulations at given storage conditions. Copyright © 2015 Elsevier B.V. All rights reserved.
Bagnis, Simone; Fitzsimons, Mark; Snape, Jason; Tappin, Alan; Comber, Sean
2018-05-15
Evidence of ecotoxicological effects of active pharmaceuticals ingredients (APIs) has increased research into their environmental fate. In low and low-middle income countries (LLMICs) the main source of APIs to surface waters is from discharge of untreated wastewater. Consequently, concentrations of APIs can be relatively high in the "impact zone" downstream of a discharge point. Little is known about the fate of APIs in these impact zones. In this laboratory scale investigation, the effect of successive dilution of synthetic untreated wastewater (dilution factor 1 to 10) on the distribution of APIs was studied. The sorption was consistent with the chemical properties of each compound: charge, lipophilicity, and structure. Dilution increased desorption of the basic and neutral APIs (up to 27.7%) and correlated with their lipophilicity (R 2 >0.980); the positive charge was of secondary importance. Anions did not significantly desorb (<10% loss). Increased concentrations of dissolved organic matter at dilutions of 8 and 10 times that of untreated wastewater coincided with lower dissolved API concentrations. The data showed a clear trend in the desorption process of APIs that may lead to higher exposure risk than anticipated. Therefore, it is suggested that these aspects should be accounted for in the development of dedicated environmental risk assessment approach for APIs in riverine impact zones of LLMICs countries. Copyright © 2017 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Piao, Chunhui; Han, Xufang; Wu, Harris
2010-08-01
We provide a formal definition of an e-commerce transaction network. Agent-based modelling is used to simulate e-commerce transaction networks. For real-world analysis, we studied the open application programming interfaces (APIs) from eBay and Taobao e-commerce websites and captured real transaction data. Pajek is used to visualise the agent relationships in the transaction network. We derived one-mode networks from the transaction network and analysed them using degree and betweenness centrality. Integrating multi-agent modelling, open APIs and social network analysis, we propose a new way to study large-scale e-commerce systems.
NASA Astrophysics Data System (ADS)
Dong, Jingnuo; Ochsner, Tyson E.
2018-03-01
Soil moisture patterns are commonly thought to be dominated by land surface characteristics, such as soil texture, at small scales and by atmospheric processes, such as precipitation, at larger scales. However, a growing body of evidence challenges this conceptual model. We investigated the structural similarity and spatial correlations between mesoscale (˜1-100 km) soil moisture patterns and land surface and atmospheric factors along a 150 km transect using 4 km multisensor precipitation data and a cosmic-ray neutron rover, with a 400 m diameter footprint. The rover was used to measure soil moisture along the transect 18 times over 13 months. Spatial structures of soil moisture, soil texture (sand content), and antecedent precipitation index (API) were characterized using autocorrelation functions and fitted with exponential models. Relative importance of land surface characteristics and atmospheric processes were compared using correlation coefficients (r) between soil moisture and sand content or API. The correlation lengths of soil moisture, sand content, and API ranged from 12-32 km, 13-20 km, and 14-45 km, respectively. Soil moisture was more strongly correlated with sand content (r = -0.536 to -0.704) than with API for all but one date. Thus, land surface characteristics exhibit coherent spatial patterns at scales up to 20 km, and those patterns often exert a stronger influence than do precipitation patterns on mesoscale spatial patterns of soil moisture.
IgE, IgG4 and IgA specific to Bet v 1-related food allergens do not predict oral allergy syndrome.
Guhsl, E E; Hofstetter, G; Lengger, N; Hemmer, W; Ebner, C; Fröschl, R; Bublin, M; Lupinek, C; Breiteneder, H; Radauer, C
2015-01-01
Birch pollen-associated plant food allergy is caused by Bet v 1-specific IgE, but presence of cross-reactive IgE to related allergens does not predict food allergy. The role of other immunoglobulin isotypes in the birch pollen-plant food syndrome has not been investigated in detail. Bet v 1-sensitized birch pollen-allergic patients (n = 35) were diagnosed for food allergy by standardized interviews, skin prick tests, prick-to-prick tests and ImmunoCAP. Concentrations of allergen-specific IgE, IgG1, IgG4 and IgA to seven Bet v 1-related food allergens were determined by ELISA. Bet v 1, Cor a 1, Mal d 1 and Pru p 1 bound IgE from all and IgG4 and IgA from the majority of sera. Immunoglobulins to Gly m 4, Vig r 1 and Api g 1.01 were detected in <65% of the sera. No significant correlation was observed between plant food allergy and increased or reduced levels of IgE, IgG1, IgG4 or IgA specific to most Bet v 1-related allergens. Api g 1-specific IgE was significantly (P = 0.01) elevated in celeriac-allergic compared with celeriac-tolerant patients. Likewise, frequencies of IgE (71% vs 15%; P = 0.01) and IgA (86% vs 38%; P = 0.04) binding to Api g 1.01 were increased. Measurements of allergen-specific immunoglobulins are not suitable for diagnosing Bet v 1-mediated plant food allergy to hazelnut and Rosaceae fruits. In contrast, IgE and IgA to the distantly related allergen Api g 1 correlate with allergy to celeriac. © 2014 The Authors. Allergy Published by John Wiley & Sons Ltd.
2005-04-12
Hardware, Database, and Operating System independence using Java • Enterprise-class Architecture using Java2 Enterprise Edition 1.4 • Standards based...portal applications. Compliance with the Java Specification Request for Portlet APIs (JSR-168) (Portlet API) and Web Services for Remote Portals...authentication and authorization • Portal Standards using Java Specification Request for Portlet APIs (JSR-168) (Portlet API) and Web Services for Remote
Multicomponent Pharmaceutical Cocrystals: A Novel Approach for Combination Therapy.
Fatima, Zeeshan; Srivastava, Dipti; Kaur, Chanchal Deep
2018-03-05
Cocrystallization is a technique for modifying the physicochemical and pharmacokinetic properties of an active pharmaceutical ingredient (API) embodying the concept of supramolecular synthon. Most of the examples cited in the literature are of cocrystals formed between an API and a coformer chosen from the generally recognized as safe (GRAS) substance list, however, few examples exist where a cocrystal consists of two or more APIs. These cocrystals are commonly known as multi API, multi drug or drug- drug cocrystals. The formation of such cocrystals is feasible by virtue of non covalent interactions between the APIs, which help them in retaining their biologic activity. In addition, drug- drug cocrystals also offer the potential solution to the limitations such as solubility, stability differences and chemical interaction between the APIs which is often faced during the traditional combination therapy. Cocrystallization of two or more APIs can be employed for delivery of combination drugs for the better and efficacious management of many complex disorders where existing monotherapies do not furnish the desired therapeutic effect. This review on the existing drug-drug cocrystals is to gain insight for better designing of multi API cocrystals with improved physicochemical and pharmacokinetic profile and its application in multiple target therapy. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.
Investigation into process-induced de-aggregation of cohesive micronised API particles.
Hoffmann, Magnus; Wray, Patrick S; Gamble, John F; Tobyn, Mike
2015-09-30
The aim of this study was to assess the impact of unit processes on the de-aggregation of a cohesive micronised API within a pharmaceutical formulation using near-infrared chemical imaging. The impact on the primary API particles was also investigated using an image-based particle characterization system with integrated Raman analysis. The blended material was shown to contain large, API rich domains which were distributed in-homogeneously across the sample, suggesting that the blending process was not aggressive enough to disperse aggregates of micronised drug particles. Cone milling, routinely used to improve the homogeneity of such cohesive formulations, was observed to substantially reduce the number and size of API rich domains; however, several smaller API domains survived the milling process. Conveyance of the cone milled formulation through the Alexanderwerk WP120 powder feed system completely dispersed all remaining aggregates. Importantly, powder feed transmission of the un-milled formulation was observed to produce an equally homogeneous API distribution. The size of the micronised primary drug particles remained unchanged during powder feed transmission. These findings provide further evidence that this powder feed system does induce shear, and is in fact better able to disperse aggregates of a cohesive micronised API within a blend than the blend-mill-blend step. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.
Apoptosis inhibitor 5 (API-5; AAC-11; FIF) is upregulated in human carcinomas in vivo.
Koci, Lenka; Chlebova, Katarina; Hyzdalova, Martina; Hofmanova, Jirina; Jira, Miroslav; Kysela, Petr; Kozubik, Alois; Kala, Zdenek; Krejci, Pavel
2012-04-01
Apoptosis inhibitor 5 (API-5) is a 55 kDa nuclear protein with potent anti-apoptotic signaling in tumor cells in vitro. In this study, we analyzed the expression of the API-5 protein in vivo in a broad spectrum of human carcinomas, including those of the colon, lung, liver, kidney, pancreas, stomach and esophagus using tumor tissues obtained during tumor resection. The results showed significant upregulation of API-5 expression in biopsies of lung (23%, n=13) and colorectal tumors (33%, n=27) in comparison with biopsies from the adjacent normal tissue. Colon cancer biopsies were used to study the cell populations with an upregulated level of expression of API-5 more closely. Using a magnetic bead-based selection for the epithelial cell marker EpCAM, we purified epithelial cells from the tumor and control tissues and analyzed these cells for API-5 expression by western immunoblotting. We observed that EpCAM-positive tumor cells expressed API-5 in all three colorectal cancer cases tested, in contrast to the control EpCAM-positive and EpCAM-negative cells isolated from the control or tumor tissues. These data suggest that the expression of the API-5 protein is upregulated in tumor epithelial cells and may serve as a prognostic marker in colorectal cancer.
Gattinger, Pia; Lupinek, Christian; Kalogiros, Lampros; Silar, Mira; Zidarn, Mihaela; Korosec, Peter; Koessler, Christine; Novak, Natalija; Valenta, Rudolf; Mittermann, Irene
2018-01-01
Allergy to bee and wasp venom can lead to life-threatening systemic reactions. The identification of the culprit species is important for allergen-specific immunotherapy. To determine a panel of recombinant bee and wasp allergens which is suitable for the identification of bee or wasp as culprit allergen sources and to search for molecular surrogates of clinical severity of sting reactions. Sera from eighty-seven patients with a detailed documentation of their severity of sting reaction (Mueller grade) and who had been subjected to titrated skin testing with bee and wasp venom were analyzed for bee and wasp-specific IgE levels by ImmunoCAPTM. IgE-reactivity testing was performed using a comprehensive panel of recombinant bee and wasp venom allergens (rApi m 1, 2, 3, 4, 5 and 10; rVes v 1 and 5) by ISAC chip technology, ImmunoCAP and ELISA. IgG4 antibodies to rApi m 1 and rVes v 5 were determined by ELISA and IgE/IgG4 ratios were calculated. Results from skin testing, IgE serology and IgE/IgG4 ratios were compared with severity of sting reactions. The panel of rApi m 1, rApi m 10, rVes v 1 and rVes v 5 allowed identification of the culprit venom in all but two of the 87 patients with good agreement to skin testing. Severities of sting reactions were not associated with results obtained by skin testing, venom-specific IgE levels or molecular diagnosis. Severe sting reactions were observed in patients showing < 1 ISU and < 2kUA/L of IgE to Api m 1 and/or Ves v 5. We identified a minimal panel of recombinant bee and wasp allergens for molecular diagnosis which may permit identification of bee and/or wasp as culprit insect in venom-sensitized subjects. The severity of sting reactions was not associated with parameters obtained by molecular diagnosis.
Pipe Storage and Movement Study
1986-02-01
API 5L Points Higher Price Than API 5L Grades A or B Wall Range—X Grades X42 * X46* X52 * X60 X65 X70* * All Walls...thereof may be used at Mill Option for API 5L Grades X42, X46 and X52 unless specifically prohibited. * * DSAW only. NOTES: For Intermediate Grodes, apply...A53, BW, S 80, GALV 1-1/4", STL, A53, BW, S 80, GALV 2", STL, A53, BW, S 80, GALV 8", STL, API - 5L GR X-42, ERW, STD 3-1/2"OD, STL, API - 5L GR
49 CFR 195.432 - Inspection of in-service breakout tanks.
Code of Federal Regulations, 2014 CFR
2014-10-01
... low-pressure steel aboveground breakout tanks according to API Standard 653 (incorporated by reference... breakout tanks built to API Standard 2510 according to section 6 of API 510. (d) The intervals of...
49 CFR 195.432 - Inspection of in-service breakout tanks.
Code of Federal Regulations, 2012 CFR
2012-10-01
... low-pressure steel aboveground breakout tanks according to API Standard 653 (incorporated by reference... breakout tanks built to API Standard 2510 according to section 6 of API 510. (d) The intervals of...
49 CFR 195.432 - Inspection of in-service breakout tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... low-pressure steel aboveground breakout tanks according to API Standard 653 (incorporated by reference... breakout tanks built to API Standard 2510 according to section 6 of API 510. (d) The intervals of...
49 CFR 195.432 - Inspection of in-service breakout tanks.
Code of Federal Regulations, 2010 CFR
2010-10-01
... low-pressure steel aboveground breakout tanks according to API Standard 653 (incorporated by reference... breakout tanks built to API Standard 2510 according to section 6 of API 510. (d) The intervals of...
49 CFR 195.432 - Inspection of in-service breakout tanks.
Code of Federal Regulations, 2013 CFR
2013-10-01
... low-pressure steel aboveground breakout tanks according to API Standard 653 (incorporated by reference... breakout tanks built to API Standard 2510 according to section 6 of API 510. (d) The intervals of...
Grassl, Julia; Peng, Yan; Baer-Imhoof, Barbara; Welch, Mat; Millar, A Harvey; Baer, Boris
2017-01-06
Honey bee (Apis mellifera) males are highly susceptible to infections with the sexually transmitted fungal pathogen Nosema apis. However, they are able to suppress this parasite in the ejaculate using immune molecules in the seminal fluid. We predicted that males respond to infections by altering the seminal fluid proteome to minimize the risk to sexually transmit the parasite to the queen and her colony. We used iTRAQ isotopic labeling to compare seminal fluid proteins from infected and noninfected males and found that N. apis infections resulted in significant abundance changes in 111 of the 260 seminal fluid proteins quantitated. The largest group of proteins with significantly changed abundances consisted of 15 proteins with well-known immune-related functions, which included two significantly more abundant chitinases in the seminal fluid of infected males. Chitinases were previously hypothesized to be involved in honey bee antifungal activity against N. apis. Here we show that infection with N. apis triggers a highly specific immune response in the seminal fluid of honey bee males.
Hot-stage microscopy for determination of API particles in a formulated tablet.
Simek, Michal; Grünwaldová, Veronika; Kratochvíl, Bohumil
2014-01-01
Although methods exist to readily determine the particle size distribution (PSD) of an active pharmaceutical ingredient (API) before its formulation into a final product, the primary challenge is to develop a method to determine the PSD of APIs in a finished tablet. To address the limitations of existing PSD methods, we used hot-stage microscopy to observe tablet disintegration during temperature change and, thus, reveal the API particles in a tablet. Both mechanical and liquid disintegration were evaluated after we had identified optimum milling time for mechanical disintegration and optimum volume of water for liquid disintegration. In each case, hot-stage micrographs, taken before and after the API melting point, were compared with image analysis software to obtain the PSDs. Then, the PSDs of the APIs from the disintegrated tablets were compared with the PSDs of raw APIs. Good agreement was obtained, thereby confirming the robustness of our methodology. The availability of such a method equips pharmaceutical scientists with an in vitro assessment method that will more reliably determine the PSD of active substances in finished tablets.
GIANT API: an application programming interface for functional genomics.
Roberts, Andrew M; Wong, Aaron K; Fisk, Ian; Troyanskaya, Olga G
2016-07-08
GIANT API provides biomedical researchers programmatic access to tissue-specific and global networks in humans and model organisms, and associated tools, which includes functional re-prioritization of existing genome-wide association study (GWAS) data. Using tissue-specific interaction networks, researchers are able to predict relationships between genes specific to a tissue or cell lineage, identify the changing roles of genes across tissues and uncover disease-gene associations. Additionally, GIANT API enables computational tools like NetWAS, which leverages tissue-specific networks for re-prioritization of GWAS results. The web services covered by the API include 144 tissue-specific functional gene networks in human, global functional networks for human and six common model organisms and the NetWAS method. GIANT API conforms to the REST architecture, which makes it stateless, cacheable and highly scalable. It can be used by a diverse range of clients including web browsers, command terminals, programming languages and standalone apps for data analysis and visualization. The API is freely available for use at http://giant-api.princeton.edu. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.
Cunningham, Virginia L; D'Aco, Vincent J; Pfeiffer, Danielle; Anderson, Paul D; Buzby, Mary E; Hannah, Robert E; Jahnke, James; Parke, Neil J
2012-07-01
This article presents the capability expansion of the PhATE™ (pharmaceutical assessment and transport evaluation) model to predict concentrations of trace organics in sludges and biosolids from municipal wastewater treatment plants (WWTPs). PhATE was originally developed as an empirical model to estimate potential concentrations of active pharmaceutical ingredients (APIs) in US surface and drinking waters that could result from patient use of medicines. However, many compounds, including pharmaceuticals, are not completely transformed in WWTPs and remain in biosolids that may be applied to land as a soil amendment. This practice leads to concerns about potential exposures of people who may come into contact with amended soils and also about potential effects to plants and animals living in or contacting such soils. The model estimates the mass of API in WWTP influent based on the population served, the API per capita use, and the potential loss of the compound associated with human use (e.g., metabolism). The mass of API on the treated biosolids is then estimated based on partitioning to primary and secondary solids, potential loss due to biodegradation in secondary treatment (e.g., activated sludge), and potential loss during sludge treatment (e.g., aerobic digestion, anaerobic digestion, composting). Simulations using 2 surrogate compounds show that predicted environmental concentrations (PECs) generated by PhATE are in very good agreement with measured concentrations, i.e., well within 1 order of magnitude. Model simulations were then carried out for 18 APIs representing a broad range of chemical and use characteristics. These simulations yielded 4 categories of results: 1) PECs are in good agreement with measured data for 9 compounds with high analytical detection frequencies, 2) PECs are greater than measured data for 3 compounds with high analytical detection frequencies, possibly as a result of as yet unidentified depletion mechanisms, 3) PECs are less than analytical reporting limits for 5 compounds with low analytical detection frequencies, and 4) the PEC is greater than the analytical method reporting limit for 1 compound with a low analytical detection frequency, possibly again as a result of insufficient depletion data. Overall, these results demonstrate that PhATE has the potential to be a very useful tool in the evaluation of APIs in biosolids. Possible applications include: prioritizing APIs for assessment even in the absence of analytical methods; evaluating sludge processing scenarios to explore potential mitigation approaches; using in risk assessments; and developing realistic nationwide concentrations, because PECs can be represented as a cumulative probability distribution. Finally, comparison of PECs to measured concentrations can also be used to identify the need for fate studies of compounds of interest in biosolids. Copyright © 2011 SETAC.
Prioritizing pharmaceuticals in municipal wastewater
Oral presentation at SETAC North America 32nd annual meeting, describing our prioritization of active pharmaceutical ingredients (APIs), based on estimates of risks posed by API residues originating from municipal wastewater. Goals of this project include prioritization of APIs f...
Nervous system active pharmaceutical ingredients (APIs), including anti-depressants and opioids, are important clinically administered pharmaceuticals within healthcare facilities. Concentrations and mass loadings of ten nervous system APIs and three nervous system API metaboli...
[Effect of habitat and interspecific competition on Apis cerana cerana colony distribution].
Yu, Linsheng; Han, Shengming
2003-04-01
Habitat change and interspecific competition were the main factors affecting, Apis cerana cerana colony distribution among Wannan and Wanxi Dabie mountainous areas, Jianghuai area and Huaibei plain. Wannan and Wanxi Dabie mountainous areas were the ideal places for Apis cerana cerana' habitation and propogation, in which, there were integrated natural vegetation, fine ecological condition, abundant nectariferous plants, and Apis cerana cerana had large colony size, wide distribution, high density, no disturbances of natural mating, and was dominant interspecific competition. In Jianghuai area and Huaibei plain, there were small covering of natural vegetation, different degree of degradation of ecological balance, few kinds of nectariferous plants with almost the same blooming periods, natural mating perturbed by Apis mellifera ligustica for Apis cerana cerana, and which was inferior in interspecific competition, colony size sharply decreased, distribution area reduced, and density cut down to a great extent. In Huaibei plain, the negative factors were more conspicuous.
Yoink: An interaction-based partitioning API.
Zheng, Min; Waller, Mark P
2018-05-15
Herein, we describe the implementation details of our interaction-based partitioning API (application programming interface) called Yoink for QM/MM modeling and fragment-based quantum chemistry studies. Interactions are detected by computing density descriptors such as reduced density gradient, density overlap regions indicator, and single exponential decay detector. Only molecules having an interaction with a user-definable QM core are added to the QM region of a hybrid QM/MM calculation. Moreover, a set of molecule pairs having density-based interactions within a molecular system can be computed in Yoink, and an interaction graph can then be constructed. Standard graph clustering methods can then be applied to construct fragments for further quantum chemical calculations. The Yoink API is licensed under Apache 2.0 and can be accessed via yoink.wallerlab.org. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.
PyPDB: a Python API for the Protein Data Bank.
Gilpin, William
2016-01-01
We have created a Python programming interface for the RCSB Protein Data Bank (PDB) that allows search and data retrieval for a wide range of result types, including BLAST and sequence motif queries. The API relies on the existing XML-based API and operates by creating custom XML requests from native Python types, allowing extensibility and straightforward modification. The package has the ability to perform many types of advanced search of the PDB that are otherwise only available through the PDB website. PyPDB is implemented exclusively in Python 3 using standard libraries for maximal compatibility. The most up-to-date version, including iPython notebooks containing usage tutorials, is available free-of-charge under an open-source MIT license via GitHub at https://github.com/williamgilpin/pypdb, and the full API reference is at http://williamgilpin.github.io/pypdb_docs/html/. The latest stable release is also available on PyPI. wgilpin@stanford.edu. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.
Thabet, Yasmin; Lunter, Dominique; Breitkreutz, Joerg
2018-05-30
Various drug therapies require more than one active pharmaceutical ingredient (API) for an effective treatment. There are many advantages, e.g. to improve the compliance or pharmacodynamic response in comparison to a monotherapy or to increase the therapy safety. Until now, there are only a few products available for the paediatric population due to the lack of age appropriate dosage forms or studies proving the efficacy and safety of these products. This study aims to develop orodispersible films (ODFs) in a continuous solvent casting process as child appropriate dosage form containing both enalapril maleate (EM) and hydrochlorothiazide (HCT) separated in different film layers. Furthermore, they should be characterised and the API migration analysed by confocal Raman microscopy (CRM). ODFs were successfully produced in a continuous manufacturing process in form of double- and triple-layer formulations based on hydroxypropylcellulose (HPC) or a combination of HPC and polyvinyl alcohol (PVA). CRM revealed that both APIs migrate within the film layers shortly after manufacturing. PVA inhibits the migration inside the double-layer film, but is not able to prevent the API migration as an interlayer inside a triple-layer ODF. With increasing film layers, the content of residual solvents and the disintegration time increases (mono-layer films: <10 s, triple-layer films: 37 s). In conclusion, it was feasible to produce fixed-dose combinations in therapeutic doses up to 9 mg HCT and 3.5 mg EM for the double-layer film with adequate mechanical properties, which enable coiling up onto jumbo rolls directly after production. The best separation of the two APIs was achieved by casting a double-layer ODF consisting of different film forming polymers, which can be beneficial when processing two incompatible APIs. Copyright © 2018 Elsevier B.V. All rights reserved.
Phenotypic and genotypic characterization of phenanthrene-degrading fluorescent Pseudomonas biovars.
Johnsen, K; Andersen, S; Jacobsen, C S
1996-01-01
A total of 41 phenanthrene degraders were isolated from a former coal gasification site by using Pseudomonas-selective Gould's S1 medium. All isolates were found to belong to the fluorescent Pseudomonas group and were subjected to characterization by phenotypic methods, including classical taxonomic tests, API 20NE, and Biolog GN, and the strains were further characterized by the genotypic method repetitive extragenic palindromic PCR (REP-PCR). By using classical tests, the population was found to consist of 38 strains belonging to P. fluorescens, 2 P. putida strains, and 1 Pseudomonas sp. Bacteria in phenograms from Biolog GN and REP-PCR data were divided into groups, which were in good agreement with classical test and API 20NE results. We found a nonfluorescent group of 22 bacteria inconsistent with any Pseudomonas sp. in Bergey's Manual of Systematic Bacteriology. The group showed small differences in the genotypic test, indicating that all 22 isolates were not recent clones of the same isolate. Analyses of the nonfluorescent group indicated that it belonged to Pseudomonas, but the group could not be affiliated with P. fluorescens because of differences in DNA-DNA hybridization. Identifications using classical tests and API 20NE were found to correlate, but Biolog GN identifications after 24-h incubation resulted very often in the distantly related P. corrugata. The reproducibilities of individual tests of each phenotypic method were assessed, and low reproducibilities were mainly found to be associated with specific Biolog GN test wells. Classical tests and API 20NE proved to be the best for identification of isolates, whereas Biolog GN and REP-PCR were found to be the best tests for high resolution among these closely related isolates. PMID:8837438
Huang, Wei-Fone; Solter, Leellen; Aronstein, Katherine; Huang, Zachary
2015-01-01
Nosema ceranae infection is ubiquitous in western honey bees, Apis mellifera, in the United States and the pathogen has apparently replaced Nosema apis in colonies nationwide. Displacement of N. apis suggests that N. ceranae has competitive advantages but N. ceranae was significantly less infective and less virulent than N. apis in commercially available lineages of honey bees in studies conducted in Illinois and Texas. At 5 days post eclosion, the most susceptible age of adult bees tested, the mean ID50 for N. apis was 359 spores compared to 3217 N. ceranae spores, a nearly 9-fold difference. Infectivity of N. ceranae was also lower than N. apis for 24-h and 14-day worker bees. N. ceranae was less infective than reported in studies using European strains of honey bees, while N. apis infectivity, tested in the same cohort of honey bees, corresponded to results reported globally from 1972 to 2010. Mortality of worker bees was similar for both pathogens at a dosage of 50 spores and was not different from the uninfected controls, but was significantly higher for N. apis than N. ceranae at dosages ⩾500 spores. Our results provide comparisons for evaluating research using different ages of bees and pathogen dosages and clarify some controversies. In addition, comparisons among studies suggest that the mixed lineages of US honey bees may be less susceptible to N. ceranae infections than are European bees or that the US isolates of the pathogen are less infective and less virulent than European isolates. Copyright © 2014 Elsevier Inc. All rights reserved.
Thiruchelvam, Loshini; Dass, Sarat C; Zaki, Rafdzah; Yahya, Abqariyah; Asirvadam, Vijanth S
2018-05-07
This study investigated the potential relationship between dengue cases and air quality - as measured by the Air Pollution Index (API) for five zones in the state of Selangor, Malaysia. Dengue case patterns can be learned using prediction models based on feedback (lagged terms). However, the question whether air quality affects dengue cases is still not thoroughly investigated based on such feedback models. This work developed dengue prediction models using the autoregressive integrated moving average (ARIMA) and ARIMA with an exogeneous variable (ARIMAX) time series methodologies with API as the exogeneous variable. The Box Jenkins approach based on maximum likelihood was used for analysis as it gives effective model estimates and prediction. Three stages of model comparison were carried out for each zone: first with ARIMA models without API, then ARIMAX models with API data from the API station for that zone and finally, ARIMAX models with API data from the zone and spatially neighbouring zones. Bayesian Information Criterion (BIC) gives goodness-of-fit versus parsimony comparisons between all elicited models. Our study found that ARIMA models, with the lowest BIC value, outperformed the rest in all five zones. The BIC values for the zone of Kuala Selangor were -800.66, -796.22, and -790.5229, respectively, for ARIMA only, ARIMAX with single API component and ARIMAX with API components from its zone and spatially neighbouring zones. Therefore, we concluded that API levels, either temporally for each zone or spatio- temporally based on neighbouring zones, do not have a significant effect on dengue cases.
Official Guard and Reserve Manpower Strengths and Statistics. FY 2004
2004-01-01
Comments concerned with policy issues of use of these reports for Reserve Component studies should be addressed to the Office of the Assistant Secretary...CD in v eg o COCOCOI^COGOCOGOr-COinr-. OJCOCOOJCDr-cn*- CDCDCDCDCDCDCDCncn& cnCD cocooiNtotoncocMcococoeor^o ddr^wi^wtbp ccccr-eci-trcTO...API 1 OASD (RA> RESERVE FORCES POLICY BOARD 5 OASD (MM&PP) (O&EPM) 1 OASD (HAKMRl (MP&T) 1 OASD (FM&P) (MM&PP) (APi 1 OASD/RA(M&Pl 20 OASD (FM
Liu, Longjian; Yang, Xuan; Liu, Hui; Wang, Mingquan; Welles, Seth; Márquez, Shannon; Frank, Arthur; Haas, Charles N
2016-01-01
China has had a rapid increase in its economy over the past three decades. However, the economic boom came at a certain cost of depleting air quality. In the study, we aimed to examine the burden of air pollution and its association with climatic factors and health outcomes using data from Chinese national and city-level air quality and public health surveillance systems. City-level daily air pollution index (API, a sum weighted index of SO2, NO2, PM10, CO, and Ozone) in 120 cities in 2012 and 2013, and its association with climate factors were analyzed using multiple linear regression analysis, spatial autocorrelation analysis, and panel fixed models. City-level ecological association between annual average API and total mortality were examined using univariate and partial correlation analysis. Sensitivity analysis was conducted by taking the consideration of time-lag effect between exposures and outcomes. The results show that among the 120 cities, annual average API significantly increased from 2012 to 2013 (65.05 vs. 75.99, p < 0.0001). The highest average API was in winter, and the lowest in summer. A significantly spatial clustering of elevated API was observed, with the highest API in northwest China in 2012 and with the highest in east China in 2013. In 2012, 5 (4%) of the 120 cities had ≥60 days with API >100 (defined as "slightly polluted"), however, it increased to 21 cities (18%) that experienced API >100 for ≥60 days in 2013. Furthermore, 16 cities (13%) in 2012 and 35 (29%) in 2013 experienced a maximum API >300 (defined as "severely polluted"). API was negatively and significantly correlated with heat index, precipitation, and sunshine hours, but positively with air pressure. Cities with higher API concentrations had significantly higher total mortality rates than those with lower API. About a 4-7% of the variation in total mortality could be explained by the difference in API across the nation. In conclusion, the study highlights an increased trend of air pollution from 2012 to 2013 in China. The magnitude of air pollution varied by seasons and regions and correlated with climatic factors and total mortality across the country.
NSLS-II HIGH LEVEL APPLICATION INFRASTRUCTURE AND CLIENT API DESIGN
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shen, G.; Yang; L.
2011-03-28
The beam commissioning software framework of NSLS-II project adopts a client/server based architecture to replace the more traditional monolithic high level application approach. It is an open structure platform, and we try to provide a narrow API set for client application. With this narrow API, existing applications developed in different language under different architecture could be ported to our platform with small modification. This paper describes system infrastructure design, client API and system integration, and latest progress. As a new 3rd generation synchrotron light source with ultra low emittance, there are new requirements and challenges to control and manipulate themore » beam. A use case study and a theoretical analysis have been performed to clarify requirements and challenges to the high level applications (HLA) software environment. To satisfy those requirements and challenges, adequate system architecture of the software framework is critical for beam commissioning, study and operation. The existing traditional approaches are self-consistent, and monolithic. Some of them have adopted a concept of middle layer to separate low level hardware processing from numerical algorithm computing, physics modelling, data manipulating, plotting, and error handling. However, none of the existing approaches can satisfy the requirement. A new design has been proposed by introducing service oriented architecture technology. The HLA is combination of tools for accelerator physicists and operators, which is same as traditional approach. In NSLS-II, they include monitoring applications and control routines. Scripting environment is very important for the later part of HLA and both parts are designed based on a common set of APIs. Physicists and operators are users of these APIs, while control system engineers and a few accelerator physicists are the developers of these APIs. With our Client/Server mode based approach, we leave how to retrieve information to the developers of APIs and how to use them to form a physics application to the users. For example, how the channels are related to magnet and what the current real-time setting of a magnet is in physics unit are the internals of APIs. Measuring chromaticities are the users of APIs. All the users of APIs are working with magnet and instrument names in a physics unit. The low level communications in current or voltage unit are minimized. In this paper, we discussed our recent progress of our infrastructure development, and client API.« less
Liu, Longjian; Yang, Xuan; Liu, Hui; Wang, Mingquan; Welles, Seth; Márquez, Shannon; Frank, Arthur; Haas, Charles N.
2016-01-01
China has had a rapid increase in its economy over the past three decades. However, the economic boom came at a certain cost of depleting air quality. In the study, we aimed to examine the burden of air pollution and its association with climatic factors and health outcomes using data from Chinese national and city-level air quality and public health surveillance systems. City-level daily air pollution index (API, a sum weighted index of SO2, NO2, PM10, CO, and Ozone) in 120 cities in 2012 and 2013, and its association with climate factors were analyzed using multiple linear regression analysis, spatial autocorrelation analysis, and panel fixed models. City-level ecological association between annual average API and total mortality were examined using univariate and partial correlation analysis. Sensitivity analysis was conducted by taking the consideration of time-lag effect between exposures and outcomes. The results show that among the 120 cities, annual average API significantly increased from 2012 to 2013 (65.05 vs. 75.99, p < 0.0001). The highest average API was in winter, and the lowest in summer. A significantly spatial clustering of elevated API was observed, with the highest API in northwest China in 2012 and with the highest in east China in 2013. In 2012, 5 (4%) of the 120 cities had ≥60 days with API >100 (defined as “slightly polluted”), however, it increased to 21 cities (18%) that experienced API >100 for ≥60 days in 2013. Furthermore, 16 cities (13%) in 2012 and 35 (29%) in 2013 experienced a maximum API >300 (defined as “severely polluted”). API was negatively and significantly correlated with heat index, precipitation, and sunshine hours, but positively with air pressure. Cities with higher API concentrations had significantly higher total mortality rates than those with lower API. About a 4–7% of the variation in total mortality could be explained by the difference in API across the nation. In conclusion, the study highlights an increased trend of air pollution from 2012 to 2013 in China. The magnitude of air pollution varied by seasons and regions and correlated with climatic factors and total mortality across the country. PMID:27486572
Alattal, Yehya; AlGhamdi, Ahmad; Single, Arif; Ansari, Mohammad Javed; Alkathiri, Hussien
2017-07-01
Varroa mite is the most destructive pest to bee colonies worldwide. In Saudi Arabia, preliminary data indicated high infestation levels in the exotic honeybee colonies; such as Apis mellifera carnica and Apis mellifera ligustica , compared to native honeybee subspecies Apis mellifera jemenitica , which may imply higher tolerance to Varroasis . In this study, fertility and reproductive rate of Varroa mite, Varroa destructor , in capped brood cells of the native honeybee subspecies were investigated and compared with an exotic honeybee subspecies, A. m . carnica . Mite fertility was almost alike (87.5% and 89.4%) in the native and craniolan colonies respectively. Similarly, results did not show significant differences in reproduction rate between both subspecies ( F = 0.66, Pr > F = 0.42). Number of adult Varroa daughters per fertile mother mite was 2.0 and 2.1 for native and craniolan honeybee subspecies respectively. This may indicate that mechanisms of keeping low infestation rates in the native honeybee colonies are not associated with Varroa reproduction. Therefore, potential factors of keeping lower Varroa infestation rates in native honey bee subspecies should be further investigated.
Hu, Wen-Jian; Liu, Jing; Zhong, Lun-Kun; Wang, Jian
2018-06-01
Nasopharyngeal carcinoma (NPC) is a type of head and neck cancers with poor prognosis. Despite that platinum-based chemotherapy concurrent with radiotherapy have made great achievements for the treatment of NPC, the therapeutic reaction and toxicity varies dramatically among individuals. Apigenin (API), a naturally occurring plant flavone, is considered to have anti-cancer effect. Cetuximab (CET), a well known epidermal growth factor receptor (EGFR) inhibitor, is widely used in various cancers, especially head and neck cancers. The aim of our study was to measure the combination of API and CET for the treatment of NPC in vitro and in vivo. Results demonstrated that combining API and CET could better suppress the viability of the human nasopharyngeal carcinoma cell lines (HONE1 and CNE2) and inhibit the growth of NPC than API or CET used alone. Besides, the combination of API with CET produced greater pro-apoptosis effect. Moreover, the increased G2/M phase arrest caused by CET could be remarkably enhanced by adding API in HONE1 and CNE2 cells. Although, both API and CET could decrease the expressions of p-EGFR, p-Akt, p-STAT3 and Cyclin D1. Combining them produced greater inhibition effect. These results suggested that the combination of API and CET may be a promising therapeutic approach for the treatment of NPC. Copyright © 2018 Elsevier Masson SAS. All rights reserved.
An Application Programming Interface for Synthetic Snowflake Particle Structure and Scattering Data
NASA Technical Reports Server (NTRS)
Lammers, Matthew; Kuo, Kwo-Sen
2017-01-01
The work by Kuo and colleagues on growing synthetic snowflakes and calculating their single-scattering properties has demonstrated great potential to improve the retrievals of snowfall. To grant colleagues flexible and targeted access to their large collection of sizes and shapes at fifteen (15) microwave frequencies, we have developed a web-based Application Programming Interface (API) integrated with NASA Goddard's Precipitation Processing System (PPS) Group. It is our hope that the API will enable convenient programmatic utilization of the database. To help users better understand the API's capabilities, we have developed an interactive web interface called the OpenSSP API Query Builder, which implements an intuitive system of mechanisms for selecting shapes, sizes, and frequencies to generate queries, with which the API can then extract and return data from the database. The Query Builder also allows for the specification of normalized particle size distributions by setting pertinent parameters, with which the API can also return mean geometric and scattering properties for each size bin. Additionally, the Query Builder interface enables downloading of raw scattering and particle structure data packages. This presentation will describe some of the challenges and successes associated with developing such an API. Examples of its usage will be shown both through downloading output and pulling it into a spreadsheet, as well as querying the API programmatically and working with the output in code.
Harris, Stephen C; Perrino, Peter J; Smith, Ira; Shram, Megan J; Colucci, Salvatore V; Bartlett, Cynthia; Sellers, Edward M
2014-01-01
The objective of this study was to evaluate abuse potential, pharmacokinetics, pharmacodynamics, and safety of intranasally administered, crushed reformulated OxyContin® (oxycodone HCl controlled-release) tablets (ORF), relative to crushed original OxyContin® (OC), oxycodone powder (Oxy API), and OC placebo. This randomized, double-blind, positive- and placebo-controlled crossover study enrolled healthy, adult, nonphysically dependent recreational opioid users with recent history of intranasal drug abuse (N = 27). Active treatments contained oxycodone (30 mg). Pharmacokinetics, pharmacodynamics (e.g., Overall Drug Liking [ODL], Take Drug Again [TDA], and High Visual Analog Scales [VAS]; Subjective Drug Value [SDV]; pupillometry; intranasal irritation), and safety (e.g., adverse events, vital signs, laboratory tests) were assessed to 24 hours postdose. Crushed ORF administration yielded reduced oxycodone Cmax and increased Tmax versus crushed OC and Oxy API. Peak effects for pharmacodynamic measures were delayed with ORF (1–2 hours) versus OC and Oxy API (0.5–1 hour). ODL, TDA, High VAS, and SDV Emax values were significantly lower (P ≤ .05) and some intranasal irritation ratings were greater for ORF versus OC and Oxy API. No significant or unexpected safety findings were observed. Compared with OC and Oxy API, intranasally administered ORF was associated with lower and delayed peak plasma concentrations, decreased drug-liking, and decreased intranasal tolerability. This suggests that ORF has a decreased potential for intranasal oxycodone abuse. There were no significant or unexpected safety findings. As is true for all abuse potential studies, epidemiological or other appropriate post-marketing studies are required to assess the impact of the reduction in intranasal oxycodone abuse potential observed in the present study on real-world patterns of ORF misuse, abuse, and diversion. PMID:24243216
Hsieh, Cheng-Huan; Meher, Anil Kumar; Chen, Yu-Chie
2013-01-01
Contactless atmospheric pressure ionization (C-API) method has been recently developed for mass spectrometric analysis. A tapered capillary is used as both the sampling tube and spray emitter in C-API. No electric contact is required on the capillary tip during C-API mass spectrometric analysis. The simple design of the ionization method enables the automation of the C-API sampling system. In this study, we propose an automatic C-API sampling system consisting of a capillary (∼1 cm), an aluminium sample holder, and a movable XY stage for the mass spectrometric analysis of organics and biomolecules. The aluminium sample holder is controlled by the movable XY stage. The outlet of the C-API capillary is placed in front of the orifice of a mass spectrometer, whereas the sample well on the sample holder is moved underneath the capillary inlet. The sample droplet on the well can be readily infused into the C-API capillary through capillary action. When the sample solution reaches the capillary outlet, the sample spray is readily formed in the proximity of the mass spectrometer applied with a high electric field. The gas phase ions generated from the spray can be readily monitored by the mass spectrometer. We demonstrate that six samples can be analyzed in sequence within 3.5 min using this automatic C-API MS setup. Furthermore, the well containing the rinsing solvent is alternately arranged between the sample wells. Therefore, the C-API capillary could be readily flushed between runs. No carryover problems are observed during the analyses. The sample volume required for the C-API MS analysis is minimal, with less than 1 nL of the sample solution being sufficient for analysis. The feasibility of using this setup for quantitative analysis is also demonstrated.
Automated chart review utilizing natural language processing algorithm for asthma predictive index.
Kaur, Harsheen; Sohn, Sunghwan; Wi, Chung-Il; Ryu, Euijung; Park, Miguel A; Bachman, Kay; Kita, Hirohito; Croghan, Ivana; Castro-Rodriguez, Jose A; Voge, Gretchen A; Liu, Hongfang; Juhn, Young J
2018-02-13
Thus far, no algorithms have been developed to automatically extract patients who meet Asthma Predictive Index (API) criteria from the Electronic health records (EHR) yet. Our objective is to develop and validate a natural language processing (NLP) algorithm to identify patients that meet API criteria. This is a cross-sectional study nested in a birth cohort study in Olmsted County, MN. Asthma status ascertained by manual chart review based on API criteria served as gold standard. NLP-API was developed on a training cohort (n = 87) and validated on a test cohort (n = 427). Criterion validity was measured by sensitivity, specificity, positive predictive value and negative predictive value of the NLP algorithm against manual chart review for asthma status. Construct validity was determined by associations of asthma status defined by NLP-API with known risk factors for asthma. Among the eligible 427 subjects of the test cohort, 48% were males and 74% were White. Median age was 5.3 years (interquartile range 3.6-6.8). 35 (8%) had a history of asthma by NLP-API vs. 36 (8%) by abstractor with 31 by both approaches. NLP-API predicted asthma status with sensitivity 86%, specificity 98%, positive predictive value 88%, negative predictive value 98%. Asthma status by both NLP and manual chart review were significantly associated with the known asthma risk factors, such as history of allergic rhinitis, eczema, family history of asthma, and maternal history of smoking during pregnancy (p value < 0.05). Maternal smoking [odds ratio: 4.4, 95% confidence interval 1.8-10.7] was associated with asthma status determined by NLP-API and abstractor, and the effect sizes were similar between the reviews with 4.4 vs 4.2 respectively. NLP-API was able to ascertain asthma status in children mining from EHR and has a potential to enhance asthma care and research through population management and large-scale studies when identifying children who meet API criteria.
Infections of Nosema ceranae in four different honeybee species.
Chaimanee, Veeranan; Warrit, Natapot; Chantawannakul, Panuwan
2010-10-01
The microsporidium Nosema ceranae is detected in honeybees in Thailand for the first time. This endoparasite has recently been reported to infect most Apis mellifera honeybee colonies in Europe, the US, and parts of Asia, and is suspected to have displaced the endemic endoparasite species, Nosema apis, from the western A. mellifera. We collected and identified species of microsporidia from the European honeybee (A. mellifera), the cavity nesting Asian honeybee (Apis cerana), the dwarf Asian honeybee (Apis florea) and the giant Asian honeybee (Apis dorsata) from colonies in Northern Thailand. We used multiplex PCR technique with two pairs of primers to differentiate N. ceranae from N. apis. From 80 A. mellifera samples, 62 (77.5%) were positively identified for the presence of the N. ceranae. Amongst 46 feral colonies of Asian honeybees (A. cerana, A. florea and A. dorsata) examined for Nosema infections, only N. ceranae could be detected. No N. apis was found in our samples. N. ceranae is found to be the only microsporidium infesting honeybees in Thailand. Moreover, we found the frequencies of N. ceranae infection in native bees to be less than that of A. mellifera. Copyright 2010 Elsevier Inc. All rights reserved.
Consequences of Nosema apis infection for male honey bees and their fertility
Peng, Yan; Baer-Imhoof, Barbara; Harvey Millar, A.; Baer, Boris
2015-01-01
The queens of eusocial bees, ants and wasps mate only during a very short period early in life and males therefore produce ejaculates consisting of large numbers of high quality sperm. Such extreme selection for high fecundity resulted in males investing minimally into their somatic survival, including their immune system. However, if susceptible males are unable to protect their reproductive tissue from infections, they compromise queen fitness if they transfer pathogens during mating. We used the honey bee Apis mellifera and investigated the course of infection of the sexually transmitted pathogen Nosema apis. We predicted that honey bee males are susceptible but protect their reproductive tissues from infections. We investigated the effects of N. apis infections on the midgut, the accessory glands and the accessory testes and quantified the consequences of infection on male survival and fecundity. We found that N. apis is able to infect males, and as infections progressed, it significantly impacted fertility and survival in older males. Even though we confirm males to be able to minimize N. apis infections of their reproductive tissues, the parasite is present in ejaculates of older males. Consequently N. apis evolved alternative routes to successfully infect ejaculates and get sexually transmitted. PMID:26123530
Consequences of Nosema apis infection for male honey bees and their fertility.
Peng, Yan; Baer-Imhoof, Barbara; Millar, A Harvey; Baer, Boris
2015-06-30
The queens of eusocial bees, ants and wasps mate only during a very short period early in life and males therefore produce ejaculates consisting of large numbers of high quality sperm. Such extreme selection for high fecundity resulted in males investing minimally into their somatic survival, including their immune system. However, if susceptible males are unable to protect their reproductive tissue from infections, they compromise queen fitness if they transfer pathogens during mating. We used the honey bee Apis mellifera and investigated the course of infection of the sexually transmitted pathogen Nosema apis. We predicted that honey bee males are susceptible but protect their reproductive tissues from infections. We investigated the effects of N. apis infections on the midgut, the accessory glands and the accessory testes and quantified the consequences of infection on male survival and fecundity. We found that N. apis is able to infect males, and as infections progressed, it significantly impacted fertility and survival in older males. Even though we confirm males to be able to minimize N. apis infections of their reproductive tissues, the parasite is present in ejaculates of older males. Consequently N. apis evolved alternative routes to successfully infect ejaculates and get sexually transmitted.
Chen, Wei-Ti; Guthrie, Barbara; Shiu, Cheng-Shi; Yang, Joyce P; Weng, Zhongqi; Wang, Lixuan; Kamitani, Emiko; Fukuda, Yumiko; Luu, Binh Vinh
2014-01-01
Asians and Pacific Islanders (API) are among the fastest growing minority groups within the USA, and this growth has been accompanied by an increase in HIV incidence. Between 2000 and 2010, the API HIV infection rate increased from 4.5% to 8.7%; however, there is a paucity of HIV-related research for this group, and even less is known about the prevalence and correlates of antiretroviral therapy adherence behavior, quality of life, impact of stress, and efficacious self-management among HIV+ API Americans. This paper examines how acculturation and perceived stress affect depression symptomatology and treatment seeking in the HIV+ API population. A series of cross-sectional audio computer-assisted self-interviews were conducted with a convenience sample of 50 HIV+ API (29 in San Francisco and 21 in New York City). The relationship between acculturation and perceived stress was analyzed, and the results indicate that for those HIV+ API who reported low or moderate acculturation (as compared to those who reported high acculturation), stress was significantly mediated by depression symptomology. Interventions to address acculturation and reduce perceived stress among API generally and Asians specifically are therefore needed.
Abraham, Anuji; Crull, George
2014-10-06
A simple and robust method for obtaining fluorine-carbon proximities was established using a (19)F-(13)C heteronuclear correlation (HETCOR) two-dimensional (2D) solid-state nuclear magnetic resonance (ssNMR) experiment under magic-angle spinning (MAS). The method was applied to study a crystalline active pharmaceutical ingredient (API), avagacestat, containing two types of fluorine atoms and its API-polymer composite drug product. These results provide insight into the molecular structure, aid with assigning the carbon resonances, and probe API-polymer proximities in amorphous spray dried dispersions (SDD). This method has an advantage over the commonly used (1)H-(13)C HETCOR because of the large chemical shift dispersion in the fluorine dimension. In the present study, fluorine-carbon distances up to 8 Å were probed, giving insight into the API structure, crystal packing, and assignments. Most importantly, the study demonstrates a method for probing an intimate molecular level contact between an amorphous API and a polymer in an SDD, giving insights into molecular association and understanding of the role of the polymer in API stability (such as recrystallization, degradation, etc.) in such novel composite drug products.
Kougoulos, Eleftherios; Smales, Ian; Verrier, Hugh M
2011-03-01
A novel experimental approach describing the integration of drug substance and drug production design using particle engineering techniques such as sonocrystallization, high shear wet milling (HSWM) and dry impact (hammer) milling were used to manufacture samples of an active pharmaceutical ingredient (API) with diverse particle size and size distributions. The API instability was addressed using particle engineering and through judicious selection of excipients to reduce degradation reactions. API produced using a conventional batch cooling crystallization process resulted in content uniformity issues. Hammer milling increased fine particle formation resulting in reduced content uniformity and increased degradation compared to sonocrystallized and HSWM API in the formulation. To ensure at least a 2-year shelf life based on predictions using an Accelerated Stability Assessment Program, this API should have a D [v, 0.1] of 55 μm and a D [v, 0.5] of 140 μm. The particle size of the chief excipient in the drug product formulation needed to be close to that of the API to avoid content uniformity and stability issues but large enough to reduce lactam formation. The novel methodology described here has potential for application to other APIs. © 2011 American Association of Pharmaceutical Scientists
49 CFR 195.440 - Public awareness.
Code of Federal Regulations, 2014 CFR
2014-10-01
... Petroleum Institute's (API) Recommended Practice (RP) 1162 (incorporated by reference, see § 195.3). (b) The operator's program must follow the general program recommendations of API RP 1162 and assess the unique... general program recommendations, including baseline and supplemental requirements of API RP 1162, unless...
49 CFR 195.440 - Public awareness.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Petroleum Institute's (API) Recommended Practice (RP) 1162 (incorporated by reference, see § 195.3). (b) The operator's program must follow the general program recommendations of API RP 1162 and assess the unique... general program recommendations, including baseline and supplemental requirements of API RP 1162, unless...
49 CFR 195.440 - Public awareness.
Code of Federal Regulations, 2012 CFR
2012-10-01
... Petroleum Institute's (API) Recommended Practice (RP) 1162 (incorporated by reference, see § 195.3). (b) The operator's program must follow the general program recommendations of API RP 1162 and assess the unique... general program recommendations, including baseline and supplemental requirements of API RP 1162, unless...
Carballada, F; Boquete, M; Núñez, R; Lombardero, M; de la Torre, F
2010-01-01
To assess the efficacy of venom immunotherapy (VIT) and monitor changes in in vivo and in vitro test results after 5 years of treatment and subsequent follow-up. To study the profile of immunoglobulin (Ig) E to individual allergens prior to treatment and 1 year afterwards. We studied 562 patients with hymenoptera venom allergy (438 to bee, 124 to wasp), all of whom underwent immunotherapy with Apis or Vespula extract. The patients were followed up using conventional in vivo and in vitro tests, and in 51 cases, specific IgE against the main hymenoptera allergens was measured before starting and after 1 year of treatment. Of the 387 patients who completed VLT, 130 sensitized to Apis and 68 to Vespula suffered spontaneous re-stings during treatment. Of these, 123 (94.6%) did not suffer any reaction and 64 (94.1%) suffered only a local reaction. Sixty-two patients sensitized to Apis and 14 sensitized to Vespula suffered spontaneous re-stings after stopping treatment. Only 3 patients suffered a systemic reaction (grade I Müller). At the end of treatment, the results of skin tests and specific IgE to whole extract improved significantly. Reductions in IgE to the main allergens were observed after 1 year of treatment (median differences in Ves v 5, -238.0, P = .0425; and in Api m 1, -183.0, P = .0024). The high rate of spontaneous re-stings shows that efficacy is maintained for years after completing treatment in a real-world setting. Determination of IgE to individual venom allergens may offer new perspectives in the diagnosis and follow-up of these patients.
Blank, Simon; Seismann, Henning; McIntyre, Mareike; Ollert, Markus; Wolf, Sara; Bantleon, Frank I.; Spillner, Edzard
2013-01-01
Background/Objectives Anaphylaxis due to hymenoptera stings is one of the most severe clinical outcomes of IgE-mediated hypersensitivity reactions. Although allergic reactions to hymenoptera stings are often considered as a general model for the underlying principles of allergic disease, venom immunotherapy is still hampered by severe systemic side effects and incomplete protection. The identification and detailed characterization of all allergens of hymenoptera venoms might result in an improvement in this field and promote the detailed understanding of the allergological mechanism. Our aim was the identification and detailed immunochemical and allergological characterization of the low abundant IgE-reactive 200 kDa proteins of Apis mellifera and Vespula vulgaris venom. Methods/Principal Findings Tandem mass spectrometry-based sequencing of a 200 kDa venom protein yielded peptides that could be assigned to honeybee vitellogenin. The coding regions of the honeybee protein as well as of the homologue from yellow jacket venom were cloned from venom gland cDNA. The newly identified 200 kDa proteins share a sequence identity on protein level of 40% and belong to the family of vitellogenins, present in all oviparous animals, and are the first vitellogenins identified as components of venom. Both vitellogenins could be recombinantly produced as soluble proteins in insect cells and assessed for their specific IgE reactivity. The particular vitellogenins were recognized by approximately 40% of sera of venom-allergic patients even in the absence of cross-reactive carbohydrate determinants. Conclusion With the vitellogenins of Apis mellifera and Vespula vulgaris venom a new homologous pair of venom allergens was identified and becomes available for future applications. Due to their allergenic properties the honeybee and the yellow jacket venom vitellogenin were designated as allergens Api m 12 and Ves v 6, respectively. PMID:23626765
2014-08-01
with the Department of Emergency Medicine, Massachusetts General Hospital, Boston, MA 02114 USA (corresponding author; phone: 617 -726-2241; e-mail...programming interface ( API ). Algorithms are used to determine the reliability of waveform (e.g., electrocardiogram) and vital-sign data (e.g., heart rate...and comparing of real-time decision- support algorithms in mobile environments," Conf Proc IEEE Eng Med Biol Soc, vol. 2009 , pp. 3417-20, 2009 . [3
A RESTful API for accessing microbial community data for MG-RAST.
Wilke, Andreas; Bischof, Jared; Harrison, Travis; Brettin, Tom; D'Souza, Mark; Gerlach, Wolfgang; Matthews, Hunter; Paczian, Tobias; Wilkening, Jared; Glass, Elizabeth M; Desai, Narayan; Meyer, Folker
2015-01-01
Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MG-RAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface) we have greatly expanded access to MG-RAST data, as well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http://kbase.us) we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase's microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer) implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service.
Pulido, M J; Alvarado, E A; Berger, W; Nelson, A; Todoroff, C
2001-01-01
Hepatitis B virus (HBV) is a known cause of liver cancer, especially among Asian and Pacific Islanders (API). Despite national recommendations and school entry requirements for vaccination, many children are not fully vaccinated with the Hepatitis B vaccine (Hep B) before entering school. The purpose of this study was to measure ethnic group-specific hepatitis B vaccination rates among school-aged API children after implementation of universal recommendations and school laws, and quantify ethnic-specific risk factors associated with late and incomplete vaccinations. A multilingual questionnaire was distributed to parents of second and fourth graders in nine Los Angeles County (LAC) elementary schools with high proportions of API students. Data on Hepatitis B vaccination dates, source of health care and health information, cultural factors, and general knowledge and attitudes about HBV and vaccination were collected and analyzed. Overall, 1,696 (77%) of 2,183 questionnaires were returned. Of these, 1,024 were from API children. The API second graders in this survey had a 72% coverage rate, ranging from 46% to 94% among the individual ethnic groups. Fifty-one percent of API fourth graders had three doses of Hep B vaccine, ranging from 38% to 69% among the individual ethnic groups. Factors influencing coverage levels among API fourth graders were speaking limited English at home, living in the United States less than five years, and not having discussed hepatitis B vaccination with a health care provider. Factors influencing low immunization levels differed among the API ethnic groups. Analysis and intervention on a non-aggregate level are necessary for designing both effective and cultural-specific outreach programs for diverse API communities such as LAC's.
Deng, Shurong; Sun, Jian; Zhao, Rui; Ding, Mingquan; Zhang, Yinan; Sun, Yuanling; Wang, Wei; Tan, Yeqing; Liu, Dandan; Ma, Xujun; Hou, Peichen; Wang, Meijuan; Lu, Cunfu; Shen, Xin; Chen, Shaoliang
2015-09-01
Apyrase and extracellular ATP play crucial roles in mediating plant growth and defense responses. In the cold-tolerant poplar, Populus euphratica, low temperatures up-regulate APYRASE2 (PeAPY2) expression in callus cells. We investigated the biochemical characteristics of PeAPY2 and its role in cold tolerance. We found that PeAPY2 predominantly localized to the plasma membrane, but punctate signals also appeared in the endoplasmic reticulum and Golgi apparatus. PeAPY2 exhibited broad substrate specificity, but it most efficiently hydrolyzed purine nucleotides, particularly ATP. PeAPY2 preferred Mg(2+) as a cofactor, and it was insensitive to various, specific ATPase inhibitors. When PeAPY2 was ectopically expressed in Arabidopsis (Arabidopsis thaliana), cold tolerance was enhanced, based on root growth measurements and survival rates. Moreover, under cold stress, PeAPY2-transgenic plants maintained plasma membrane integrity and showed reduced cold-elicited electrolyte leakage compared with wild-type plants. These responses probably resulted from efficient plasma membrane repair via vesicular trafficking. Indeed, transgenic plants showed accelerated endocytosis and exocytosis during cold stress and recovery. We found that low doses of extracellular ATP accelerated vesicular trafficking, but high extracellular ATP inhibited trafficking and reduced cell viability. Cold stress caused significant increases in root medium extracellular ATP. However, under these conditions, PeAPY2-transgenic lines showed greater control of extracellular ATP levels than wild-type plants. We conclude that Arabidopsis plants that overexpressed PeAPY2 could increase membrane repair by accelerating vesicular trafficking and hydrolyzing extracellular ATP to avoid excessive, cold-elicited ATP accumulation in the root medium and, thus, reduced ATP-induced inhibition of vesicular trafficking. © 2015 American Society of Plant Biologists. All Rights Reserved.
Kunnath, Kuriakose; Huang, Zhonghui; Chen, Liang; Zheng, Kai; Davé, Rajesh
2018-05-30
It has been shown that dry coating cohesive active pharmaceutical ingredients (APIs) with nano-silica can improve packing and flow of their blends, facilitating high speed direct compression tableting. This paper examines the broader scope and generality of previous work by examining three fine APIs; micronized Acetaminophen (mAPAP), coarse Acetaminophen (cAPAP) and micronized Ibuprofen (mIBU), and considers dry coating with both hydrophobic or hydrophilic nano-silica to examine the effect not only on packing density and flow of their blends, but also dissolution and tensile strength of their tablets. The impact of the excipient size on blend and tablet properties are also investigated, indicating blend flow is most improved when matching API particle size with excipient particle size. In all cases where the API is dry coated, the blend packing and flow improve, so as to suggest such high drug loaded blends could enable direct compression. Using dry coated API along with finer excipients in blends lead to improved hardness of the corresponding tablets. Interestingly, dissolution profiles show dry coated API tablets generally have faster dissolution rates, regardless of silica hydrophilicity, suggesting API powder deagglomeration via nano-silica coating plays a crucial role. The most significant conclusion is that, although there are differences in properties of blends that depend on the API, hydrophobic or hydrophilic nano-silica coating, as well as large or fine excipients, in all cases, dry coating of APIs significantly improves the possibility of using the specific blend at high drug loading in direct compression tableting. Copyright © 2018 Elsevier B.V. All rights reserved.
Kämpfer, Peter; Nienhüser, Anita; Packroff, Gabriele; Wernicke, Frank; Mehling, Arnd; Nixdorf, Katja; Fiedler, Stefanie; Kolauch, Claudia; Esser, Michael
2008-07-01
The accuracy of a traditional method (lactose utilization with acid and gas production) for the detection of coliform bacteria and E. coli was tested in comparison with method ISO 9308-1 (based on acid formation from lactose) and the Colilert-18 system (detection of beta-galactosidase). A total of 345 isolates were identified after isolation from water samples using API 20E strips. The Colilert-18 led to the highest number of positive findings (95% of the isolates were assigned to coliforms), whereas the ISO-9308-1 method resulted only in 29% coliform findings. With the traditional method only 15% were rated positive. Most of the isolates were identified by the API 20E system as Enterobacter spp. (species of the Enterobacter cloacae complex), Serratia spp., Citrobacter spp.and Klebsiella spp.; but species identification remained vague in several cases. A more detailed identification of 126 pure cultures by using 16S rRNA gene sequence analysis and analysis of the hsp60 gene resulted in the identification of Enterobacter nimipressuralis, E. amnigenus, E. asburiae, E. hormaechei, and Serratia fonticola as predominat coliforms. These species are beta-galactosidase positive, but show acid formation from lactose often after a prolonged incubation time. They are often not of fecal origin and may interfere with the ability to accurately detect coliforms of fecal origin.
Abia, Akebe Luther King; Ubomba-Jaswa, Eunice; Momba, Maggy Ndombo Benteke
2015-10-01
This study aimed at investigating the presence of antibiotic-resistant Escherichia coli in river bed sediments of the Apies River, Gauteng, South Africa, in order to better inform health management decisions designed to protect users of the river. Overall, 180 water and sediment samples were collected at 10 sites along the Apies River from January to February 2014. E. coli was enumerated using the Colilert® 18/Quanti-Tray® 2000 (IDEXX). Isolates were purified by streaking on eosin methylene blue agar followed by the indole test. Pure E. coli isolates were tested for resistance to nine antibiotics by the Kirby-Bauer disc diffusion method. Over 98% of the isolates were resistant to at least one of the antibiotics tested. The highest resistance was observed against nitrofurantoin (sediments) and ampicillin (water). Over 80% of all resistant isolates showed multiple antibiotic resistance (resistance to ≥3 antibiotics). The abundance of E. coli in the sediments not only adds to the evidence that sediments are a reservoir for bacteria and possibly other pathogens including antibiotic-resistant bacteria but also suggests that antibiotic-resistant genes could be transferred to pathogens due to the high prevalence of multiple-antibiotic-resistant (MAR) strains of E. coli observed in the sediment. Using untreated water from the Apies River following resuspension for drinking and other household purposes could pose serious health risks for users. Our results suggest that river bed sediments could serve as reservoirs for MAR bacteria including pathogens under different climatic conditions and their analysis could provide information of public health concerns.
49 CFR 192.616 - Public awareness.
Code of Federal Regulations, 2012 CFR
2012-10-01
... follows the guidance provided in the American Petroleum Institute's (API) Recommended Practice (RP) 1162... recommendations of API RP 1162 and assess the unique attributes and characteristics of the operator's pipeline and... supplemental requirements of API RP 1162, unless the operator provides justification in its program or...
49 CFR 192.616 - Public awareness.
Code of Federal Regulations, 2014 CFR
2014-10-01
... follows the guidance provided in the American Petroleum Institute's (API) Recommended Practice (RP) 1162... recommendations of API RP 1162 and assess the unique attributes and characteristics of the operator's pipeline and... supplemental requirements of API RP 1162, unless the operator provides justification in its program or...
49 CFR 192.616 - Public awareness.
Code of Federal Regulations, 2013 CFR
2013-10-01
... follows the guidance provided in the American Petroleum Institute's (API) Recommended Practice (RP) 1162... recommendations of API RP 1162 and assess the unique attributes and characteristics of the operator's pipeline and... supplemental requirements of API RP 1162, unless the operator provides justification in its program or...
A knowledge discovery object model API for Java
Zuyderduyn, Scott D; Jones, Steven JM
2003-01-01
Background Biological data resources have become heterogeneous and derive from multiple sources. This introduces challenges in the management and utilization of this data in software development. Although efforts are underway to create a standard format for the transmission and storage of biological data, this objective has yet to be fully realized. Results This work describes an application programming interface (API) that provides a framework for developing an effective biological knowledge ontology for Java-based software projects. The API provides a robust framework for the data acquisition and management needs of an ontology implementation. In addition, the API contains classes to assist in creating GUIs to represent this data visually. Conclusions The Knowledge Discovery Object Model (KDOM) API is particularly useful for medium to large applications, or for a number of smaller software projects with common characteristics or objectives. KDOM can be coupled effectively with other biologically relevant APIs and classes. Source code, libraries, documentation and examples are available at . PMID:14583100
Integrative Advanced Oxidation and Biofiltration for Treating Pharmaceuticals in Wastewater.
Lester, Yaal; Aga, Diana S; Love, Nancy G; Singh, Randolph R; Morrissey, Ian; Linden, Karl G
2016-11-01
Advanced oxidation of active pharmaceutical ingredients (APIs) in wastewater produces transformation products (TPs) that are often more biodegradable than the parent compounds. Secondary effluent from a wastewater treatment plant was treated using UV-based advanced oxidation (LPUV/H2O2 and MPUV/NO3) followed by biological aerated filtration (BAF), and different APIs and their transformation products were monitored. The advanced oxidation processes degraded the APIs by 55-87% (LPUV/H2O2) and 58-95% (MPUV/NO3), while minor loss of APIs was achieved in the downstream BAF system. Eleven TPs were detected following oxidation of carbamazepine (5) and iopromide (6); three key TPs were biodegraded in the BAF system. The other TPs remained relatively constant in the BAF. The decrease in UV absorbance (UVA254) of the effluent in the BAF system was linearly correlated to the degradation of the APIs (for the MPUV/NO3-BAF), and can be applied to monitor the biotransformation of APIs in biological-based systems.
A Development of Lightweight Grid Interface
NASA Astrophysics Data System (ADS)
Iwai, G.; Kawai, Y.; Sasaki, T.; Watase, Y.
2011-12-01
In order to help a rapid development of Grid/Cloud aware applications, we have developed API to abstract the distributed computing infrastructures based on SAGA (A Simple API for Grid Applications). SAGA, which is standardized in the OGF (Open Grid Forum), defines API specifications to access distributed computing infrastructures, such as Grid, Cloud and local computing resources. The Universal Grid API (UGAPI), which is a set of command line interfaces (CLI) and APIs, aims to offer simpler API to combine several SAGA interfaces with richer functionalities. These CLIs of the UGAPI offer typical functionalities required by end users for job management and file access to the different distributed computing infrastructures as well as local computing resources. We have also built a web interface for the particle therapy simulation and demonstrated the large scale calculation using the different infrastructures at the same time. In this paper, we would like to present how the web interface based on UGAPI and SAGA achieve more efficient utilization of computing resources over the different infrastructures with technical details and practical experiences.
Kasthurirathne, Suranga N; Mamlin, Burke; Grieve, Grahame; Biondich, Paul
2015-01-01
Interoperability is essential to address limitations caused by the ad hoc implementation of clinical information systems and the distributed nature of modern medical care. The HL7 V2 and V3 standards have played a significant role in ensuring interoperability for healthcare. FHIR is a next generation standard created to address fundamental limitations in HL7 V2 and V3. FHIR is particularly relevant to OpenMRS, an Open Source Medical Record System widely used across emerging economies. FHIR has the potential to allow OpenMRS to move away from a bespoke, application specific API to a standards based API. We describe efforts to design and implement a FHIR based API for the OpenMRS platform. Lessons learned from this effort were used to define long term plans to transition from the legacy OpenMRS API to a FHIR based API that greatly reduces the learning curve for developers and helps enhance adhernce to standards.
Banta, E.R.; Hill, M.C.; Poeter, E.; Doherty, J.E.; Babendreier, J.
2008-01-01
The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input and output conventions allow application users to access various applications and the analysis methods they embody with a minimum of time and effort. Process models simulate, for example, physical, chemical, and (or) biological systems of interest using phenomenological, theoretical, or heuristic approaches. The types of model analyses supported by the JUPITER API include, but are not limited to, sensitivity analysis, data needs assessment, calibration, uncertainty analysis, model discrimination, and optimization. The advantages provided by the JUPITER API for users and programmers allow for rapid programming and testing of new ideas. Application-specific coding can be in languages other than the Fortran-90 of the API. This article briefly describes the capabilities and utility of the JUPITER API, lists existing applications, and uses UCODE_2005 as an example.
Required ozone doses for removing pharmaceuticals from wastewater effluents.
Antoniou, Maria G; Hey, Gerly; Rodríguez Vega, Sergio; Spiliotopoulou, Aikaterini; Fick, Jerker; Tysklind, Mats; la Cour Jansen, Jes; Andersen, Henrik Rasmus
2013-07-01
The aim of the this study was to investigate the ozone dosage required to remove active pharmaceutical ingredients (APIs) from biologically treated wastewater of varying quality, originated from different raw wastewater and wastewater treatment processes. Secondary effluents from six Swedish wastewater treatment plants (WWTP) were spiked with 42 APIs (nominal concentration μg/L) and treated with different O₃ doses (0.5-12.0 mg/L ozone) in bench-scale experiments. In order to compare the sensitivity of APIs in each matrix, the specific dose of ozone required to achieve reduction by one decade of each investigated API (DDO₃) was determined for each effluent by fitting a first order equation to the remaining concentration of API at each applied ozone dose. Ozone dose requirements were found to vary significantly between effluents depending on their matrix characteristics. The specific ozone dose was then normalized to the dissolved organic carbon (DOC) of each effluent. The DDO₃/DOC ratios were comparable for each API between the effluents. 15 of the 42 investigated APIs could be classified as easily degradable (DDO₃/DOC ≤ 0.7), while 19 were moderately degradable (0.7 < DDO₃/DOC ≤ 1.4), and 8 were recalcitrant towards O₃-treatment (DDO₃/DOC >1.4). Furthermore, we predict that a reasonable estimate of the ozone dose required to remove any of the investigated APIs may be attained by multiplying the experimental average DDO₃/DOC obtained with the actual DOC of any effluent. Copyright © 2013 Elsevier B.V. All rights reserved.
Development of NETCONF-Based Network Management Systems in Web Services Framework
NASA Astrophysics Data System (ADS)
Iijima, Tomoyuki; Kimura, Hiroyasu; Kitani, Makoto; Atarashi, Yoshifumi
To develop a network management system (NMS) more easily, the authors developed an application programming interface (API) for configuring network devices. Because this API is used in a Java development environment, an NMS can be developed by utilizing the API and other commonly available Java libraries. It is thus possible to easily develop an NMS that is highly compatible with other IT systems. And operations that are generated from the API and that are exchanged between the NMS and network devices are based on NETCONF, which is standardized by the Internet Engineering Task Force (IETF) as a next-generation network-configuration protocol. Adopting a standardized technology ensures that the NMS developed by using the API can manage network devices provided from multi-vendors in a unified manner. Furthermore, the configuration items exchanged over NETCONF are specified in an object-oriented design. They are therefore easier to manage than such items in the Management Information Base (MIB), which is defined as data to be managed by the Simple Network Management Protocol (SNMP). We actually developed several NMSs by using the API. Evaluation of these NMSs showed that, in terms of configuration time and development time, the NMS developed by using the API performed as well as NMSs developed by using a command line interface (CLI) and SNMP. The NMS developed by using the API showed feasibility to achieve “autonomic network management” and “high interoperability with IT systems.”
Schempf, Ashley H; Mendola, Pauline; Hamilton, Brady E; Hayes, Donald K; Makuc, Diane M
2010-05-01
We examined characteristics and birth outcomes of Asian/Pacific Islander (API) mothers to determine whether differences in outcomes existed between mothers of single race/ethnicity and multiple race/ethnicity. We used data from California and Hawaii birth certificates from 2003 through 2005 to describe variation in birth outcomes for API subgroups by self-reported maternal race/ethnicity (single versus multiple race or API subgroup), and we also compared these outcomes to those of non-Hispanic White women. Low birthweight (LBW) and preterm birth (PTB) varied more among API subgroups than between mothers of single versus multiple race/ethnicity. After adjustment for sociodemographic and behavioral risk factors, API mothers of multiple race/ethnicity had outcomes similar to mothers of single race/ethnicity, with exceptions for multiple-race/ethnicity Chinese (higher PTB), Filipino (lower LBW and PTB), and Thai (higher LBW) subgroups. Compared with single-race non-Hispanic Whites, adverse outcomes were elevated for most API subgroups: only single-race/ethnicity Korean mothers had lower rates of both LBW (3.4%) and PTB (5.6%); single-race/ethnicity Cambodian, Laotian, and Marshallese mothers had the highest rates of both LBW (8.8%, 9.2%, and 8.4%, respectively) and PTB (14.0%, 13.7%, and 18.8%, respectively). Strategies to improve birth outcomes for API mothers should consider variations in risk by API subgroup and multiple race/ethnicity.
Ren, Ke; Zhang, Wei; Shi, Yujun; Gong, Jianping
2010-06-01
Pim-2 is proved to be relevant to the tumorigenesis of hepatocellular carcinoma (HCC), but the mechanism is unclear. We studied the relationship among Pim-2, NF-kappaB and API-5. In our experiment, expression level of the three factors and phosphorylation level of API-5, as well as NF-kappaB activity, were detected in HCC tissues and the nontumorous controls. Then Pim-2 gene was transfected into nontumorous liver cells L02, and Pim-2 SiRNA was transfected into hepatoblastoma cell line HepG2. Parthenolide was added as NF-kappaB inhibitor. The same detections as above were repeated in the cells, along with the apoptosis analysis. We found the levels of Pim-2, NF-kappaB and API-5, as well as NF-kappaB activity, were significantly higher in HCC tissues. Pim-2 level was increased in L02 cells after the transfection of Pim-2 gene, but decreased in HepG2 cells after the transfection of Pim-2 SiRNA. The levels of NF-kappaB and API-5, as well as NF-kappaB activity and API-5 phosphorylation level, were in accordance with Pim-2 level, but could be reversed by Parthenolide. Cell apoptosis rates were negatively correlated with API-5 phosphorylation level. Therefore, we infer that Pim-2 could activate API-5 to inhibit the apoptosis of liver cells, and NF-kappaB is the key regulator.
NASA Technical Reports Server (NTRS)
Harrington, A. D.; McCubbin, F. M.; Kaur, J.; Smirnov, A.; Galdanes, K.; Schoonen, M. A. A.; Chen, L. C.; Tsirka, S. E.; Gordon, T.
2017-01-01
New initiatives to begin lunar and martian colonization within the next few decades are illustrative of the resurgence of interest in space travel. One of NASA's major concerns with extended human space exploration is the inadvertent and repeated exposure to unknown dust. This highly interdisciplinary study evaluates both the geochemical reactivity (e.g. iron solubility and acellular reactive oxygen species (ROS) generation) and the relative toxicity (e.g. in vitro and in vivo pulmonary inflammation) of six meteorite samples representing either basalt or regolith breccia on the surface of the Moon, Mars, and Asteroid 4Vesta. Terrestrial mid-ocean ridge basalt (MORB) is also used for comparison. The MORB demonstrated higher geochemical reactivity than most of the meteorite samples but caused the lowest acute pulmonary inflammation (API). Notably, the two martian meteorites generated some of the highest API but only the basaltic sample is significantly reactive geochemically. Furthermore, while there is a correlation between a meteorite's soluble iron content and its ability to generate acellular ROS, there is no direct correlation between a particle's ability to generate ROS acellularly and its ability to generate API. However, assorted in vivo API markers did demonstrate strong positive correlations with increasing bulk Fenton metal content. In summary, this comprehensive dataset allows for not only the toxicological evaluation of astromaterials but also clarifies important correlations between geochemistry and health.
Test Operations Procedure (TOP) 02-2-603A Vehicle Fuel Consumption
2012-05-10
API) Hydrometer . The API Hydrometer is used for accurate determination of the density, relative density (specific gravity), or API gravity of... Hydrometer Method. 5. TOP 02-2-505, Inspection and Preliminary Operation of Vehicles, 4 February 1987. 6. TOP 02-1-003, Hybrid Electric
NASA Astrophysics Data System (ADS)
Larour, Eric; Cheng, Daniel; Perez, Gilberto; Quinn, Justin; Morlighem, Mathieu; Duong, Bao; Nguyen, Lan; Petrie, Kit; Harounian, Silva; Halkides, Daria; Hayes, Wayne
2017-12-01
Earth system models (ESMs) are becoming increasingly complex, requiring extensive knowledge and experience to deploy and use in an efficient manner. They run on high-performance architectures that are significantly different from the everyday environments that scientists use to pre- and post-process results (i.e., MATLAB, Python). This results in models that are hard to use for non-specialists and are increasingly specific in their application. It also makes them relatively inaccessible to the wider science community, not to mention to the general public. Here, we present a new software/model paradigm that attempts to bridge the gap between the science community and the complexity of ESMs by developing a new JavaScript application program interface (API) for the Ice Sheet System Model (ISSM). The aforementioned API allows cryosphere scientists to run ISSM on the client side of a web page within the JavaScript environment. When combined with a web server running ISSM (using a Python API), it enables the serving of ISSM computations in an easy and straightforward way. The deep integration and similarities between all the APIs in ISSM (MATLAB, Python, and now JavaScript) significantly shortens and simplifies the turnaround of state-of-the-art science runs and their use by the larger community. We demonstrate our approach via a new Virtual Earth System Laboratory (VESL) website (http://vesl.jpl.nasa.gov, VESL(2017)).
Twitter data analysis: temporal and term frequency analysis with real-time event
NASA Astrophysics Data System (ADS)
Yadav, Garima; Joshi, Mansi; Sasikala, R.
2017-11-01
From the past few years, World Wide Web (www) has become a prominent and huge source for user generated content and opinionative data. Among various social media, Twitter gained popularity as it offers a fast and effective way of sharing users’ perspective towards various critical and other issues in different domain. As the data is hugely generated on cloud, it has opened doors for the researchers in the field of data science and analysis. There are various domains such as ‘Political’ domain, ‘Entertainment’ domain and ‘Business’ domain. Also there are various APIs that Twitter provides for developers 1) Search API, focus on the old tweets 2) Rest API, focuses on user details and allow to collect the user profile, friends and followers 3) Streaming API, which collects details like tweets, hashtags, geo locations. In our work we are accessing Streaming API in order to fetch real-time tweets for the dynamic happening event. For this we are focusing on ‘Entertainment’ domain especially ‘Sports’ as IPL-T20 is currently the trending on-going event. We are collecting these numerous amounts of tweets and storing them in MongoDB database where the tweets are stored in JSON document format. On this document we are performing time-series analysis and term frequency analysis using different techniques such as filtering, information extraction for text-mining that fulfils our objective of finding interesting moments for temporal data in the event and finding the ranking among the players or the teams based on popularity which helps people in understanding key influencers on the social media platform.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Piburn, Jesse
2016-04-22
Availability of accessing the World Bank Data API through the R language was limited to one existing package, which is limited in its ability. The software provides access to all of the features in World Bank API in one software package for the R language and provides functions for searching and downloading data from the World Bank API.
30 CFR 250.114 - How must I install and operate electrical equipment?
Code of Federal Regulations, 2010 CFR
2010-07-01
.... (a) You must classify all areas according to API RP 500, Recommended Practice for Classification of... Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... and hazards of electrical equipment. (c) You must install all electrical systems according to API RP...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2011 CFR
2011-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
30 CFR 250.1203 - Gas measurement.
Code of Federal Regulations, 2013 CFR
2013-07-01
... follow the recommendations in API MPMS or RP and AGA as incorporated by reference in 30 CFR 250.198, including the following additional editions: (i) API RP 86 (incorporated by reference as specified in § 250.... If an electronic data recorder is used, you must follow the recommendations in API MPMS. (5) Take...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2014 CFR
2014-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2013 CFR
2013-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
30 CFR 250.1203 - Gas measurement.
Code of Federal Regulations, 2014 CFR
2014-07-01
... follow the recommendations in API MPMS or RP and AGA as incorporated by reference in 30 CFR 250.198, including the following additional editions: (i) API RP 86 (incorporated by reference as specified in § 250.... If an electronic data recorder is used, you must follow the recommendations in API MPMS. (5) Take...
30 CFR 250.1203 - Gas measurement.
Code of Federal Regulations, 2012 CFR
2012-07-01
... follow the recommendations in API MPMS or RP and AGA as incorporated by reference in 30 CFR 250.198, including the following additional editions: (i) API RP 86 (incorporated by reference as specified in § 250.... If an electronic data recorder is used, you must follow the recommendations in API MPMS. (5) Take...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2012 CFR
2012-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
The Application Programming Interface (API) for Uncertainty Analysis, Sensitivity Analysis, and
Parameter Estimation (UA/SA/PE API) (also known as Calibration, Optimization and Sensitivity and Uncertainty (CUSO)) was developed in a joint effort between several members of both ...
Pharmaceutical solvates, hydrates and amorphous forms: A special emphasis on cocrystals.
Healy, Anne Marie; Worku, Zelalem Ayenew; Kumar, Dinesh; Madi, Atif M
2017-08-01
Active pharmaceutical ingredients (APIs) may exist in various solid forms, which can lead to differences in the intermolecular interactions, affecting the internal energy and enthalpy, and the degree of disorder, affecting the entropy. Differences in solid forms often lead to differences in thermodynamic parameters and physicochemical properties for example solubility, dissolution rate, stability and mechanical properties of APIs and excipients. Hence, solid forms of APIs play a vital role in drug discovery and development in the context of optimization of bioavailability, filing intellectual property rights and developing suitable manufacturing methods. In this review, the fundamental characteristics and trends observed for pharmaceutical hydrates, solvates and amorphous forms are presented, with special emphasis, due to their relative abundance, on pharmaceutical hydrates with single and two-component (i.e. cocrystal) host molecules. Copyright © 2017 Elsevier B.V. All rights reserved.
Buske, Orion J.; Schiettecatte, François; Hutton, Benjamin; Dumitriu, Sergiu; Misyura, Andriy; Huang, Lijia; Hartley, Taila; Girdea, Marta; Sobreira, Nara; Mungall, Chris; Brudno, Michael
2016-01-01
Despite the increasing prevalence of clinical sequencing, the difficulty of identifying additional affected families is a key obstacle to solving many rare diseases. There may only be a handful of similar patients worldwide, and their data may be stored in diverse clinical and research databases. Computational methods are necessary to enable finding similar patients across the growing number of patient repositories and registries. We present the Matchmaker Exchange Application Programming Interface (MME API), a protocol and data format for exchanging phenotype and genotype profiles to enable matchmaking among patient databases, facilitate the identification of additional cohorts, and increase the rate with which rare diseases can be researched and diagnosed. We designed the API to be straightforward and flexible in order to simplify its adoption on a large number of data types and workflows. We also provide a public test data set, curated from the literature, to facilitate implementation of the API and development of new matching algorithms. The initial version of the API has been successfully implemented by three members of the Matchmaker Exchange and was immediately able to reproduce previously-identified matches and generate several new leads currently being validated. The API is available at https://github.com/ga4gh/mme-apis. PMID:26255989
Ahkola, Heidi; Tuominen, Sirkku; Karlsson, Sanja; Perkola, Noora; Huttula, Timo; Saraperä, Sami; Artimo, Aki; Korpiharju, Taina; Äystö, Lauri; Fjäder, Päivi; Assmuth, Timo; Rosendahl, Kirsi; Nysten, Taina
2017-12-01
Anthropogenic chemicals in surface water and groundwater cause concern especially when the water is used in drinking water production. Due to their continuous release or spill-over at waste water treatment plants, active pharmaceutical ingredients (APIs) are constantly present in aquatic environment and despite their low concentrations, APIs can still cause effects on the organisms. In the present study, Chemcatcher passive sampling was applied in surface water, surface water intake site, and groundwater observation wells to estimate whether the selected APIs are able to end up in drinking water supply through an artificial groundwater recharge system. The API concentrations measured in conventional wastewater, surface water, and groundwater grab samples were assessed with the results obtained with passive samplers. Out of the 25 APIs studied with passive sampling, four were observed in groundwater and 21 in surface water. This suggests that many anthropogenic APIs released to waste water proceed downstream and can be detectable in groundwater recharge. Chemcatcher passive samplers have previously been used in monitoring several harmful chemicals in surface and wastewaters, but the path of chemicals to groundwater has not been studied. This study provides novel information on the suitability of the Chemcatcher passive samplers for detecting APIs in groundwater wells.
Charbonneau, Lise R.; Hillier, Neil Kirk; Rogers, Richard E. L.; Williams, Geoffrey R.; Shutler, Dave
2016-01-01
Western honey bees (Apis mellifera) face an increasing number of challenges that in recent years have led to significant economic effects on apiculture, with attendant consequences for agriculture. Nosemosis is a fungal infection of honey bees caused by either Nosema apis or N. ceranae. The putative greater virulence of N. ceranae has spurred interest in understanding how it differs from N. apis. Little is known of effects of N. apis or N. ceranae on honey bee learning and memory. Following a Pavlovian model that relies on the proboscis extension reflex, we compared acquisition learning and long-term memory recall of uninfected (control) honey bees versus those inoculated with N. apis, N. ceranae, or both. We also tested whether spore intensity was associated with variation in learning and memory. Neither learning nor memory differed among treatments. There was no evidence of a relationship between spore intensity and learning, and only limited evidence of a negative effect on memory; this occurred only in the co-inoculation treatment. Our results suggest that if Nosema spp. are contributing to unusually high colony losses in recent years, the mechanism by which they may affect honey bees is probably not related to effects on learning or memory, at least as assessed by the proboscis extension reflex. PMID:26961062
Stone, P J; Lucey, E C; Virca, G D; Christensen, T G; Breuer, R; Snider, G L
1990-06-01
A study was undertaken to determine whether emphysema and airway secretory cell metaplasia, induced in hamsters by intratracheal treatment with human neutrophil elastase (HNE), could be moderated by pretreatment with human alpha 1-protease inhibitor (API). API (4.9 mg) was given intratracheally to hamsters 1 h before 0.3 mg HNE. Eight weeks later, lung volumes and pressure-volume relationships were measured in the anaesthetized animals. Mean linear intercepts and secretory cell indices were measured in lung sections. API given 1 h before HNE moderated the development of bronchial secretory cell metaplasia. The severity of emphysema was reduced by 75%. Clearance studies indicated that 80% of the functional activity of instilled API could be lavaged from the lungs after 1 h, indicating a 4 h half-life in the lavageable compartment of the lungs. We calculate that for 50% protection from emphysema the molar ratio of lavageable API to HNE at the time of HNE instillation was 4.8 as compared with 0.78 for 50% inhibition of elastolytic activity in vitro, indicating that API is only 16% as efficient in vivo as compared with its in vitro HNE inhibitory effectiveness. Nevertheless, we conclude that human API given intratracheally is efficacious against HNE-induced emphysema and secretory cell metaplasia.
Emsen, Berna; Guzman-Novoa, Ernesto; Hamiduzzaman, Mollah Md; Eccles, Les; Lacey, Brian; Ruiz-Pérez, Rosario A; Nasr, Medhat
2016-01-01
This study was conducted to determine the prevalence and infection levels of the microsporidia fungi Nosema apis and/or Nosema ceranae in honey bee colonies of two Canadian provinces. Three surveys were conducted in the springs of 2008, 2010 and 2012 and PCR identification of Nosema species were performed in samples from 169 and 181 Ontario colonies and from 76 Alberta colonies that tested positive to Nosema spp. Infection levels of positive colonies were determined by microscopy and analyzed by Nosema spp. Results showed that N. ceranae was the dominant species in all three surveys (prevalence range of 41-91 vs. 4-34 % for N. apis), whereas mixed infections were less frequent than single infections (5-25 %). Infection levels of colonies parasitized by N. ceranae were three to five times higher than those of colonies parasitized by N. apis in the three surveys whereas mixed infections showed the highest spore counts. This is the first field study demonstrating significantly higher infection levels in colonies parasitized with either N. ceranae only or with both, N. ceranae and N. apis, than in colonies parasitized with N. apis only. Taken together, these results suggest that N. ceranae may be more virulent and better adapted than N. apis in cold climates such as Canadian environments.
Charbonneau, Lise R; Hillier, Neil Kirk; Rogers, Richard E L; Williams, Geoffrey R; Shutler, Dave
2016-03-10
Western honey bees (Apis mellifera) face an increasing number of challenges that in recent years have led to significant economic effects on apiculture, with attendant consequences for agriculture. Nosemosis is a fungal infection of honey bees caused by either Nosema apis or N. ceranae. The putative greater virulence of N. ceranae has spurred interest in understanding how it differs from N. apis. Little is known of effects of N. apis or N. ceranae on honey bee learning and memory. Following a Pavlovian model that relies on the proboscis extension reflex, we compared acquisition learning and long-term memory recall of uninfected (control) honey bees versus those inoculated with N. apis, N. ceranae, or both. We also tested whether spore intensity was associated with variation in learning and memory. Neither learning nor memory differed among treatments. There was no evidence of a relationship between spore intensity and learning, and only limited evidence of a negative effect on memory; this occurred only in the co-inoculation treatment. Our results suggest that if Nosema spp. are contributing to unusually high colony losses in recent years, the mechanism by which they may affect honey bees is probably not related to effects on learning or memory, at least as assessed by the proboscis extension reflex.
Buske, Orion J; Schiettecatte, François; Hutton, Benjamin; Dumitriu, Sergiu; Misyura, Andriy; Huang, Lijia; Hartley, Taila; Girdea, Marta; Sobreira, Nara; Mungall, Chris; Brudno, Michael
2015-10-01
Despite the increasing prevalence of clinical sequencing, the difficulty of identifying additional affected families is a key obstacle to solving many rare diseases. There may only be a handful of similar patients worldwide, and their data may be stored in diverse clinical and research databases. Computational methods are necessary to enable finding similar patients across the growing number of patient repositories and registries. We present the Matchmaker Exchange Application Programming Interface (MME API), a protocol and data format for exchanging phenotype and genotype profiles to enable matchmaking among patient databases, facilitate the identification of additional cohorts, and increase the rate with which rare diseases can be researched and diagnosed. We designed the API to be straightforward and flexible in order to simplify its adoption on a large number of data types and workflows. We also provide a public test data set, curated from the literature, to facilitate implementation of the API and development of new matching algorithms. The initial version of the API has been successfully implemented by three members of the Matchmaker Exchange and was immediately able to reproduce previously identified matches and generate several new leads currently being validated. The API is available at https://github.com/ga4gh/mme-apis. © 2015 WILEY PERIODICALS, INC.
Rios-Romenets, S; Giraldo-Chica, M; López, H; Piedrahita, F; Ramos, C; Acosta-Baena, N; Muñoz, C; Ospina, P; Tobón, C; Cho, W; Ward, M; Langbaum, J B; Tariot, P N; Reiman, E M; Lopera, F
2018-01-01
The Alzheimer's Prevention Initiative (API) Autosomal Dominant Alzheimer's Disease (ADAD) trial evaluates the anti-amyloid-β antibody crenezumab in cognitively unimpaired persons who, based on genetic background and age, are at high imminent risk of clinical progression, and provides a powerful test of the amyloid hypothesis. The Neurosciences Group of Antioquia implemented a pre-screening process with the goals of decreasing screen failures and identifying participants most likely to adhere to trial requirements of the API ADAD trial in cognitively unimpaired members of Presenilin1 E280A mutation kindreds. The pre-screening failure rate was 48.2%: the primary reason was expected inability to comply with the protocol, chiefly due to work requirements. More carriers compared to non-carriers, and more males compared to females, failed pre-screening. Carriers with illiteracy or learning/comprehension difficulties failed pre-screening more than non-carriers. With the Colombian API Registry and our prescreening efforts, we randomized 169 30-60 year-old cognitively unimpaired carriers and 83 non-carriers who agreed to participate in the trial for at least 60 months. Our findings suggest multiple benefits of implementing a pre-screening process for enrolling prevention trials in ADAD.
Miksík, I; Vylitová, M; Pácha, J; Deyl, Z
1999-04-16
High-performance liquid chromatography coupled to atmospheric pressure ionization-electrospray ionization mass spectrometry (API-ESI-MS) was investigated for the analysis of corticosterone metabolites; their characterization was obtained by combining the separation on Zorbax Eclipse XDB C18 column (eluted with a methanol-water-acetic acid gradient) with identification using positive ion mode API-ESI-MS and selected ion analysis. The applicability of this method was verified by monitoring the activity of steroid converting enzymes (20beta-hydroxysteroid dehydrogenase and 11beta-hydroxysteroid dehydrogenase) in avian intestines.
OSCAR API for Real-Time Low-Power Multicores and Its Performance on Multicores and SMP Servers
NASA Astrophysics Data System (ADS)
Kimura, Keiji; Mase, Masayoshi; Mikami, Hiroki; Miyamoto, Takamichi; Shirako, Jun; Kasahara, Hironori
OSCAR (Optimally Scheduled Advanced Multiprocessor) API has been designed for real-time embedded low-power multicores to generate parallel programs for various multicores from different vendors by using the OSCAR parallelizing compiler. The OSCAR API has been developed by Waseda University in collaboration with Fujitsu Laboratory, Hitachi, NEC, Panasonic, Renesas Technology, and Toshiba in an METI/NEDO project entitled "Multicore Technology for Realtime Consumer Electronics." By using the OSCAR API as an interface between the OSCAR compiler and backend compilers, the OSCAR compiler enables hierarchical multigrain parallel processing with memory optimization under capacity restriction for cache memory, local memory, distributed shared memory, and on-chip/off-chip shared memory; data transfer using a DMA controller; and power reduction control using DVFS (Dynamic Voltage and Frequency Scaling), clock gating, and power gating for various embedded multicores. In addition, a parallelized program automatically generated by the OSCAR compiler with OSCAR API can be compiled by the ordinary OpenMP compilers since the OSCAR API is designed on a subset of the OpenMP. This paper describes the OSCAR API and its compatibility with the OSCAR compiler by showing code examples. Performance evaluations of the OSCAR compiler and the OSCAR API are carried out using an IBM Power5+ workstation, an IBM Power6 high-end SMP server, and a newly developed consumer electronics multicore chip RP2 by Renesas, Hitachi and Waseda. From the results of scalability evaluation, it is found that on an average, the OSCAR compiler with the OSCAR API can exploit 5.8 times speedup over the sequential execution on the Power5+ workstation with eight cores and 2.9 times speedup on RP2 with four cores, respectively. In addition, the OSCAR compiler can accelerate an IBM XL Fortran compiler up to 3.3 times on the Power6 SMP server. Due to low-power optimization on RP2, the OSCAR compiler with the OSCAR API achieves a maximum power reduction of 84% in the real-time execution mode.
Teti, G; Burdash, N M; Zamboni, C; Fava, C; Tomasello, F; Mastroeni, P
1984-01-01
A new commercial method intended to exclude the presence of Salmonella spp., Shigella spp., and Yersinia enterocolitica and to presumptively identify Salmonella isolates within 2 h after primary isolation from stool specimens was evaluated. This system is marketed in Europe as API Z and in the United States as Rapid SST. The strip consists of five pairs of cupules for the screening of five lactose-negative colonies. The first cupule of each pair detects the presence of five enzymatic activities, whereas the second serves to maintain the strain for additional testing if necessary. A total of 197 fresh isolates from stool specimens and 217 stock cultures of Salmonella spp., Shigella spp., and Yersinia enterocolitica were tested, with the API 20E system as a reference method. In the stool specimens, 77.3% of the bacteria could be excluded from further workup for the presence of these organisms within 2 h. Over 97% of the stock strains and each of three fresh Salmonella isolates tested produced a reaction pattern corresponding to a correct presumptive identification. This reaction pattern was not produced by any isolate other than the Salmonella isolates. The API Z system can be used as a screen for the presence of Salmonella and Shigella spp. and can provide an accurate presumptive identification of Salmonella isolates within 2 h after primary isolation. PMID:6394610
Home Energy Scoring Tools (website) and Application Programming Interfaces, APIs (aka HEScore)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mills, Evan; Bourassa, Norm; Rainer, Leo
A web-based residential energy rating tool with APIs that runs the LBNL website: Provides customized estimates of residential energy use and energy bills based on building description information provided by the user. Energy use is estimated using engineering models developed at LBNL. Space heating and cooling use is based on the DOE-2. 1E building simulation model. Other end-users (water heating, appliances, lighting, and misc. equipment) are based on engineering models developed by LBNL.
Home Energy Scoring Tools (website) and Application Programming Interfaces, APIs (aka HEScore)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mills, Evan; Bourassa, Norm; Rainer, Leo
2016-04-22
A web-based residential energy rating tool with APIs that runs the LBNL website: Provides customized estimates of residential energy use and energy bills based on building description information provided by the user. Energy use is estimated using engineering models developed at LBNL. Space heating and cooling use is based on the DOE-2. 1E building simulation model. Other end-users (water heating, appliances, lighting, and misc. equipment) are based on engineering models developed by LBNL.
Rosebeck, Shaun; Lim, Megan S; Elenitoba-Johnson, Kojo S J; McAllister-Lucas, Linda M; Lucas, Peter C
2016-01-01
Lymphoma of mucosa-associated lymphoid tissue (MALT lymphoma) is the most common extranodal B cell tumor and accounts for 8% of non-Hodgkin’s lymphomas. Gastric MALT lymphoma is the best-studied example and is a prototypical neoplasm that occurs in the setting of chronic inflammation brought on by persistent infection or autoimmune disease. Cytogenetic abnormalities are commonly acquired during the course of disease and the most common is chromosomal translocation t(11;18)(q21;q21), which creates the API2-MALT1 fusion oncoprotein. t(11;18)-positive lymphomas can be clinically aggressive and have a higher rate of dissemination than t(11;18)-negative tumors. Many cancers, including MALT lymphomas, characteristically exhibit deregulated over-activation of cellular survival pathways, such as the nuclear factor-κB (NF-κB) pathway. Molecular characterization of API2-MALT1 has revealed it to be a potent activator of NF-κB, which is required for API2-MALT1-induced cellular transformation, however the mechanisms by which API2-MALT1 exerts these effects are only recently becoming apparent. The API2 moiety of the fusion binds tumor necrosis factor (TNF) receptor associated factor (TRAF) 2 and receptor interacting protein 1 (RIP1), two proteins essential for TNF receptor-induced NF-κB activation. By effectively mimicking ligand-bound TNF receptor, API2-MALT1 promotes TRAF2-dependent ubiquitination of RIP1, which then acts as a scaffold for nucleating and activating the canonical NF-κB machinery. Activation occurs, in part, through MALT1 moiety-dependent recruitment of TRAF6, which can directly modify NF-κB essential modulator, the principal downstream regulator of NF-κB. While the intrinsic MALT1 protease catalytic activity is dispensable for this canonical NF-κB signaling, it is critical for non-canonical NF-κB activation. In this regard, API2-MALT1 recognizes NF-κB inducing kinase (NIK), the essential upstream regulator of non-canonical NF-κB, and cleaves it to generate a stable, constitutively active fragment. Thus, API2-MALT1 harnesses multiple unique pathways to achieve deregulated NF-κB activation. Emerging data from our group and others have also detailed additional gain-of-function activities of API2-MALT1 that extend beyond NF-κB activation. Specifically, API2-MALT1 recruits and subverts multiple other signaling factors, including LIM domain and actin-binding protein 1 (LIMA1) and Smac/DIABLO. Like NIK, LIMA1 represents a unique substrate for API2-MALT1 protease activity, but unlike NIK, its cleavage sets in motion a major NF-κB-independent pathway for promoting oncogenesis. In this review, we highlight the most recent results characterizing these unique and diverse gain-of-function activities of API2-MALT1 and how they contribute to lymphomagenesis. PMID:26981201
Nosema ceranae, a newly identified pathogen of Apis mellifera in the U.S. and Asia
USDA-ARS?s Scientific Manuscript database
Nosemosis (Nosema disease) is one of the most serious and prevalent adult honey bee diseases worldwide. For years, Nosema apis was thought to be the only microsporidia infecting domestic bee colonies. However, recently it was discovered that N. ceranae could jump from Asian honey bees (Apis cerana...
Targeted Information Dissemination
2008-03-01
SETUP, RESULTS AND PERFORMANCE ANALYSIS .......................................... 36 APPENDIX C: TID API SPECIFICATION...are developed using FreePastry1. FreePastry provides an API for a structured P2P overlay network. Information Routing and address resolution is...the TID architecture to demonstrate its key features. TID interface API specifications are described in Appendix C. RSS feeds were used to obtain
30 CFR 250.114 - How must I install and operate electrical equipment?
Code of Federal Regulations, 2012 CFR
2012-07-01
... their facilities. (a) You must classify all areas according to API RP 500, Recommended Practice for... 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... electrical systems according to API RP 14F, Recommended Practice for Design and Installation of Electrical...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2013 CFR
2013-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.
Code of Federal Regulations, 2010 CFR
2010-10-01
... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...
30 CFR 250.114 - How must I install and operate electrical equipment?
Code of Federal Regulations, 2011 CFR
2011-07-01
... structures, and their facilities. (a) You must classify all areas according to API RP 500, Recommended... Class I, Division 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations... according to API RP 14F, Recommended Practice for Design and Installation of Electrical Systems for Fixed...
30 CFR 250.114 - How must I install and operate electrical equipment?
Code of Federal Regulations, 2014 CFR
2014-07-01
... their facilities. (a) You must classify all areas according to API RP 500, Recommended Practice for... 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... electrical systems according to API RP 14F, Recommended Practice for Design and Installation of Electrical...
49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.
Code of Federal Regulations, 2011 CFR
2011-10-01
... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...
49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.
Code of Federal Regulations, 2012 CFR
2012-10-01
... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...
49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.
Code of Federal Regulations, 2013 CFR
2013-10-01
... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2012 CFR
2012-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.
Code of Federal Regulations, 2014 CFR
2014-10-01
... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
30 CFR 250.114 - How must I install and operate electrical equipment?
Code of Federal Regulations, 2013 CFR
2013-07-01
... their facilities. (a) You must classify all areas according to API RP 500, Recommended Practice for... 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... electrical systems according to API RP 14F, Recommended Practice for Design and Installation of Electrical...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2014 CFR
2014-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
43 CFR 3103.4-3 - Heavy oil royalty reductions.
Code of Federal Regulations, 2013 CFR
2013-10-01
... must certify that the API oil gravity for the initial and subsequent 12-month periods was not subject... reduction for a property if BLM determines that the API oil gravity was manipulated or adulterated by the... effective date of the royalty rate reduction resulting from a manipulated or adulterated API oil gravity so...
43 CFR 3103.4-3 - Heavy oil royalty reductions.
Code of Federal Regulations, 2012 CFR
2012-10-01
... must certify that the API oil gravity for the initial and subsequent 12-month periods was not subject... reduction for a property if BLM determines that the API oil gravity was manipulated or adulterated by the... effective date of the royalty rate reduction resulting from a manipulated or adulterated API oil gravity so...
43 CFR 3103.4-3 - Heavy oil royalty reductions.
Code of Federal Regulations, 2014 CFR
2014-10-01
... must certify that the API oil gravity for the initial and subsequent 12-month periods was not subject... reduction for a property if BLM determines that the API oil gravity was manipulated or adulterated by the... effective date of the royalty rate reduction resulting from a manipulated or adulterated API oil gravity so...
43 CFR 3103.4-3 - Heavy oil royalty reductions.
Code of Federal Regulations, 2011 CFR
2011-10-01
... must certify that the API oil gravity for the initial and subsequent 12-month periods was not subject... reduction for a property if BLM determines that the API oil gravity was manipulated or adulterated by the... effective date of the royalty rate reduction resulting from a manipulated or adulterated API oil gravity so...
Salud, Margaret C; Marshak, Helen Hopp; Natto, Zuhair S; Montgomery, Susanne
2014-01-01
While HIV rates are low for Asian/Pacific Islanders (APIs), they have been increasing, especially for API women in the USA. We conducted a cross-sectional study with 299 young API women (18-24 years old) in the Inland Empire region of Southern California to better understand their intention for HIV testing and their perceptions about HIV/AIDS. Data analyses included descriptive statistics, bivariate exploration for model building and multivariate analyses to determine variables associated with HIV-testing intentions. Results suggest that more lifetime sexual partners, greater perceived gender susceptibility, higher HIV/AIDS knowledge, sexually active, more positive attitudes about HIV testing and higher self-perceptions/experiences related to risk contribute to stronger intentions for HIV testing in young API women. Findings from this study will contribute to the limited literature on HIV/AIDS in API women and provide information that can be used for developing and implementing culturally appropriate programs that encourage HIV prevention and testing in this population.
Salud, Margaret C.; Marshak, Helen Hopp; Natto, Zuhair S.; Montgomery, Susanne
2015-01-01
While HIV rates are low for Asian/Pacific Islanders (APIs), they have been increasing, especially for API women in the USA. We conducted a cross-sectional study with 299 young API women (18–24 years old) in the Inland Empire region of Southern California to better understand their intention for HIV testing and their perceptions about HIV/AIDS. Data analyses included descriptive statistics, bivariate exploration for model building and multivariate analyses to determine variables associated with HIV-testing intentions. Results suggest that more lifetime sexual partners, greater perceived gender susceptibility, higher HIV/AIDS knowledge, sexually active, more positive attitudes about HIV testing and higher self-perceptions/experiences related to risk contribute to stronger intentions for HIV testing in young API women. Findings from this study will contribute to the limited literature on HIV/AIDS in API women and provide information that can be used for developing and implementing culturally appropriate programs that encourage HIV prevention and testing in this population. PMID:24111859
Thermodynamic phase behavior of API/polymer solid dispersions.
Prudic, Anke; Ji, Yuanhui; Sadowski, Gabriele
2014-07-07
To improve the bioavailability of poorly soluble active pharmaceutical ingredients (APIs), these materials are often integrated into a polymer matrix that acts as a carrier. The resulting mixture is called a solid dispersion. In this work, the phase behaviors of solid dispersions were investigated as a function of the API as well as of the type and molecular weight of the carrier polymer. Specifically, the solubility of artemisinin and indomethacin was measured in different poly(ethylene glycol)s (PEG 400, PEG 6000, and PEG 35000). The measured solubility data and the solubility of sulfonamides in poly(vinylpyrrolidone) (PVP) K10 and PEG 35000 were modeled using the perturbed-chain statistical associating fluid theory (PC-SAFT). The results show that PC-SAFT predictions are in a good accordance with the experimental data, and PC-SAFT can be used to predict the whole phase diagram of an API/polymer solid dispersion as a function of the kind of API and polymer and of the polymer's molecular weight. This remarkably simplifies the screening process for suitable API/polymer combinations.
Yu, Linsheng; Zou, Yunding; Bi, Shoudong; Wu, Houzhang; Cao, Yifeng
2006-08-01
In 2002 to approximately 2004, an investigation was made on the bee population dynamics and its relationships with the ecological environment in four ecological regions of Anhui Province. The results indicated that in the mountainous areas of south and west Anhui, there were 46 and 37 species of nectariferous plants, and the distribution density of Apis cerena cerena population was 2.01 and 1.95 colony x km(-2), respectively. In Jianghuai area and Huaibei plain, there were 17 and 12 species of nectariferous plants, which had concentrated and short flowering period and fitted for Apis mellifera Ligustica oysterring and producing, and the distribution density of Apis cerena cerena population was 0. 06 and 0. 02 colony x km(-2), respectively. Bee population fluctuation and distribution was affected by wasp predation. The breeding proportion of Apis cerena cerena to local apis population was 41.5%, 36.8%, 3.1% and 1.1%, and that of Apis mellifera Ligustica was 58.5%, 63.2%, 96.9% and 98.9% in the mountainous areas of south and west Anhui, Jianghuai area, and Huaibei plain, respectively.
Rapid identification of Prototheca species by the API 20C system.
Padhye, A A; Baker, J G; D'Amato, R F
1979-01-01
The conventional auxanographic method of testing for the assimilation of carbohydrates and alcohols by the various species of Prototheca requires at least 2 weeks of incubation at 25 to 30 degrees C before definitive results are obtained. Even though Prototheca spp., in culture as well as in fixed tissues, can be identified more rapidly by fluorescent-antibody techniques in which species-specific reagents are used, such diagnostic facilities and reagents are not available in most diagnostic laboratories. The API 20C clinical yeast identification system, a commercially available ready-to-use micromethod, was found to permit the definitive identification of P. stagnora, P. wickerhamii, and P. zopfii within 4 days. Images PMID:393722
Vocabulary services to support scientific data interoperability
NASA Astrophysics Data System (ADS)
Cox, Simon; Mills, Katie; Tan, Florence
2013-04-01
Shared vocabularies are a core element in interoperable systems. Vocabularies need to be available at run-time, and where the vocabularies are shared by a distributed community this implies the use of web technology to provide vocabulary services. Given the ubiquity of vocabularies or classifiers in systems, vocabulary services are effectively the base of the interoperability stack. In contemporary knowledge organization systems, a vocabulary item is considered a concept, with the "terms" denoting it appearing as labels. The Simple Knowledge Organization System (SKOS) formalizes this as an RDF Schema (RDFS) application, with a bridge to formal logic in Web Ontology Language (OWL). For maximum utility, a vocabulary should be made available through the following interfaces: * the vocabulary as a whole - at an ontology URI corresponding to a vocabulary document * each item in the vocabulary - at the item URI * summaries, subsets, and resources derived by transformation * through the standard RDF web API - i.e. a SPARQL endpoint * through a query form for human users. However, the vocabulary data model may be leveraged directly in a standard vocabulary API that uses the semantics provided by SKOS. SISSvoc3 [1] accomplishes this as a standard set of URI templates for a vocabulary. Any URI comforming to the template selects a vocabulary subset based on the SKOS properties, including labels (skos:prefLabel, skos:altLabel, rdfs:label) and a subset of the semantic relations (skos:broader, skos:narrower, etc). SISSvoc3 thus provides a RESTFul SKOS API to query a vocabulary, but hiding the complexity of SPARQL. It has been implemented using the Linked Data API (LDA) [2], which connects to a SPARQL endpoint. By using LDA, we also get content-negotiation, alternative views, paging, metadata and other functionality provided in a standard way. A number of vocabularies have been formalized in SKOS and deployed by CSIRO, the Australian Bureau of Meteorology (BOM) and their collaborators using SISSvoc3, including: * geologic timescale (multiple versions) * soils classification * definitions from OGC standards * geosciml vocabularies * mining commodities * hyperspectral scalars Several other agencies in Australia have adopted SISSvoc3 for their vocabularies. SISSvoc3 differs from other SKOS-based vocabulary-access APIs such as GEMET [3] and NVS [4] in that (a) the service is decoupled from the content store, (b) the service URI is independent of the content URIs This means that a SISSvoc3 interface can be deployed over any SKOS vocabulary which is available at a SPARQL endpoint. As an example, a SISSvoc3 query and presentation interface has been deployed over the NERC vocabulary service hosted by the BODC, providing a search interface which is not available natively. We use vocabulary services to populate menus in user interfaces, to support data validation, and to configure data conversion routines. Related services built on LDA have also been used as a generic registry interface, and extended for serving gazetteer information. ACKNOWLEDGEMENTS The CSIRO SISSvoc3 implementation is built using the Epimorphics ELDA platform http://code.google.com/p/elda/. We thank Jacqui Githaiga and Terry Rankine for their contributions to SISSvoc design and implementation. REFERENCES 1. SISSvoc3 Specification https://www.seegrid.csiro.au/wiki/Siss/SISSvoc30Specification 2. Linked Data API http://code.google.com/p/linked-data-api/wiki/Specification 3. GEMET https://svn.eionet.europa.eu/projects/Zope/wiki/GEMETWebServiceAPI 4. NVS 2.0 http://vocab.nerc.ac.uk/
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hollman, David; Lifflander, Jonathon; Wilke, Jeremiah
2017-03-14
DARMA is a portability layer for asynchronous many-task (AMT) runtime systems. AMT runtime systems show promise to mitigate challenges imposed by next generation high performance computing architectures. However, current runtime system technologies are not production-ready. DARMA is a portability layer that seeks to insulate application developers from idiosyncrasies of individual runtime systems, thereby facilitating application-developer use of these technologies. DARMA comprises a frontend application programming interface (API) for application developers, a backend API for runtime system developers, and a translation that translates frontend API calls into backend API calls. Application developers use C++ abstractions to annotate both data and tasksmore » in their code. The DARMA translation layer uses C++ template metaprogramming to capture data-task dependencies, and provides this information to a potential backend runtime system via a series of backend API calls.« less
A RESTful API for accessing microbial community data for MG-RAST
Wilke, Andreas; Bischof, Jared; Harrison, Travis; ...
2015-01-08
Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MGRAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface) we have greatly expanded access to MG-RAST data, asmore » well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http:// kbase.us) we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase’s microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer) implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service.« less
The development, validity, and reliability of the Addiction Profile Index (API).
Ögel, Kültegin; Evren, Cüneyt; Karadağ, Figen; Gürol, Defne Tamar
2012-01-01
The objective of this study was to develop a practical questionnaire for multidimensional assessment of problems associated with alcohol and substance abuse that would also be useful for treatment planning. The Addiction Profile Index (API) is a self-report questionnaire consisting of 37 items and the following 5 subscales: characteristics of substance use; dependency diagnosis; the effects of subsance use on the user; craving; motivation to quit using substances. The study included 345 alcohol and/or substance abusers from 2 addiction treatment clinics and a prison addiction service. The validity of the questionnaire was assessed using the Michigan Alcoholism Screening Test (MAST), Readiness to Change Questionnaire (SOCRATES), Penn Alcohol Craving Scale (PACS), Drug Craving Scale (DCS), Structured Clinical Interview for DSM-IV Axis I Disorders (SCID-I), and Addiction Severity Index (ASI). The Cronbach's alpha coefficient for the total API was 0.89 and for the subscales it ranged from 0.63 to 0.86. Item-total correlation coefficients ranged from 0.42 to 0.89. The Spearman Brown split-half method coefficient for the total API was 0.83. In all, 4 factors were obtained using explanatory factor analysis that represented 52.3% of the total variance. The API craving subscale was observed to be consistent with PACS and the API motivation subscale was consistent with SOCRATES. The API total score was strongly correlated with the mean MAST score, and the composite ASI medical status, substance use, legal status, and family social relations subscale scores. Based on ROC analyses, the area under curve was 0.90. With a total API cut-off score of 4, the scale's sensitivity and specificity 0.85 was 0.78, respectively. The findings show that the API is a valid and reliable questionnaire that can be used to measure the severity of different dimensions of substance dependency.
A RESTful API for Accessing Microbial Community Data for MG-RAST
Wilke, Andreas; Bischof, Jared; Harrison, Travis; Brettin, Tom; D'Souza, Mark; Gerlach, Wolfgang; Matthews, Hunter; Paczian, Tobias; Wilkening, Jared; Glass, Elizabeth M.; Desai, Narayan; Meyer, Folker
2015-01-01
Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MG-RAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface) we have greatly expanded access to MG-RAST data, as well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http://kbase.us) we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase's microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer) implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service. PMID:25569221
The Disinfecting Potential of Contact Lens Soutions used by Sultan Qaboos University Students
Nzeako, B. C.; Al-Sumri, Sara H.
2011-01-01
Objectives: This study aimed to determine the disinfecting potential of some contact lens solutions used by some university students in Oman. Methods: This work was carried out from January to June 2010 in the Department of Microbiology & Immunology, College of Medicine and Health Sciences, Sultan Qaboos University, Oman. Fifty disinfecting solutions, in which contact lenses were disinfected according to the manufacturers’ instructions, were collected from the students and plated on various microbiological culture media. Bacterial isolates were identified by API-20E, API-20NE and Phoenix automated systems while fungi were identified by their cultural characteristics and biochemistry. Results: From 98 isolates, Pseudomonas aeruginosa was 23.5%; Penicillium, 13%; Candida species, 9.2%; coagulase negative staphylococci, 9.2%; Serratia marcescens, 6.1%; Bacillus, 5.1%; Aspergillus flavus, 5.1%; Serratia liquefaciens, Pseudomonas fluorescens, Enterobacter cloacae and Aspergillus niger, 4.1% each; Chryseomonas luteola and Chryseomonas indologenes, 3.1% each; Stenotrophomonas maltophilia, Serratia odorifera, 2.0% each; Enterobacter aerogenes and Klebsiella pneumoniae, 1% each. Most isolates (65%) came from polyhexanide containing solutions. Conclusion: Contact lens disinfecting solutions with the same formulations, but manufactured by different companies, possessed different disinfecting potentials. PMID:21969898
Huading, Shi; Critto, Andrea; Torresan, Silvia; Qingxian, Gao
2018-06-13
With the rapid economic development and the continuous population growth, several important cities in China suffer serious air pollution, especially in the Beijing-Tianjin-Hebei economic developing area. Based on the daily air pollution index (API) and surface meteorological elements in Beijing, Tianjin and Shijiazhuang from 2001 to 2010, the relationships between API and meteorological elements were analyzed. The statistical analysis focused on the relationships at seasonal and monthly average scales, on different air pollution grades and air pollution processes. The results revealed that the air pollution conditions in the three areas gradually improved from 2001 to 2010, especially during summer; and the worst conditions in air quality were recorded in Beijing in spring due to the influences of dust, while in Tianjin and Shijiazhuang in winter due to household heating. Meteorological elements exhibited different influences on air pollution, showing similar relationships between API in monthly averages and four meteorological elements (i.e., the average, maximum and minimum temperatures, maximum air pressure, vapor pressure, and maximum wind speed); while the relationships on a seasonal average scale demonstrated significant differences. Compared with seasonal and monthly average scales of API, the relation coefficients based on different air pollution grades were significatively lower; while the relationship between API and meteorological elements based on air pollution process reduced the smoothing effect due to the average processing of seasonal and monthly API and improved the accuracy of the results based on different air pollution grades. Finally, statistical analysis of the distribution of pollution days in different wind directions indicated the directions of extreme and maximum wind speeds that mainly influence air pollution; representing a valuable information that could support the definition of air pollution control strategies through the identification of the regions (and the located emission sources) where to focus the implementation of emission reduction actions. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
Hartmann, K; Ferk, G; North, T W; Pedersen, N C
1997-09-01
9-[(2R,5R-2,5-dihydro-5-phosphonomethoxy)-2-furanyl]adenine, or D4API, was tested in the feline immunodeficiency virus (FIV) infection model and found to be significantly more inhibitory in vitro than its parent compound 9-phosphonylmethoxethyl adenine (PMEA). Cytotoxicity was less than for PMEA or azidothymidine (AZT) for culture periods of 7 days, but more toxic after 10 days. D4API was rapidly absorbed by cats following subcutaneous inoculation, with a plasma half-life of less than 1 h after intravenous inoculation and between 2 and 3 h after subcutaneous injection. Peripheral blood mononuclear cells collected from cats given a single dose of D4API were refractory, however, to FIV infection in vitro for up to 24 h. Given its prolonged intracellular phase and high selectivity index, high dose D4API therapy was tested for its ability to abort an acute (i.e. 2 week) FIV infection. A divided daily dose of D4API, which was one-fourth the toxic dose and 125 times the concentration that would totally inhibit virus replication in vitro, completely abrogated the anticipated viremia and antibody responses. Unfortunately, a majority of treated/uninfected and treated/infected test cats died acutely of drug toxicity after 47 days of treatment. Toxicity in vivo mirrored what was observed in vitro, being precipitous and cumulative in nature. Toxic signs included widespread hepatic and lymphoid necrosis. A surviving treated/FIV infected cat remained healthy to day 175 when the study was terminated; antibodies appeared 2 months later than in untreated/infected cats and virus was only detectable at low levels on day 175. In contrast, untreated/infected cats were viremic and antibody positive from 3 to 4 weeks post-infection onwards. Therefore, it was possible to alter, but not abort, an early FIV infection with prolonged, high-dose D4API treatment.
Kurnatowska, A; Białasiewicz, D
2001-01-01
Hydrolase activity of (enzymograms, biotypes) in Geotrichum candidum, one of the poorly described pathogenic fungi, was studied 81 strains were isolated from oral cavity and faeces of patients with gastrointestinal tract disorders. Axenic strains were differentiated with API 20C Aux and API ZYM tests. Then, enzymograms and biotypes were determined for all strains based on the activity of 19 hydrolases. High variability of enzymograms (17 different types) was found. The highest activity was noted in case of: e2 - alkaline phosphatase, e6 - leucine arylamidase, e11 - acid phosphatase. E5 - lipase, e7 - valine arylamidase, e12 - naphtol-AS-BI-phosphohydrolase and e17 - beta-glucosidase were used for biotyping procedures. Our own system of biotyping of 81 strains of G. candidum was based on the mathematical binominal distribution formula (1 : 4 : 6 : 4 : 1) - all "+"; one "-", three "+"; two "two "+"; three "-", one "+"; all "-". We have found: A (11.1 +/- 3.5%), BI (6.17 +/- 2.67%), B2 (1.23 +/- 1.22%), B4 (4.94 +/- 2.41%), C, (1.23 +/-1.22%), C3 (63.0 +/- 5.4%), D2 (9.88 +/-3.31%), D3 (2.47 +/- 1.72%). Among all strains from 8 various biotypes of G. candidum.
Daughton, Christian G; Ruhoy, Ilene S
2009-12-01
The combined excretion of active pharmaceutical ingredients (APIs) via urine and feces is considered the primary route by which APIs from human pharmaceuticals enter the environment. Disposal of unwanted, leftover medications by flushing into sewers has been considered a secondary route-one that does not contribute substantially to overall environmental loadings. The present study presents the first comprehensive examination of secondary routes of API release to the environment and for direct but unintentional human exposure. These include bathing, washing, and laundering, all of which release APIs remaining on the skin from the use of high-content dermal applications or from excretion to the skin via sweating, and disposal of unused and partially used high-content devices. Also discussed are the health hazards associated with: partially used devices, medication disposal practices of consumers, and interpersonal dermal transfer of API residues. Understanding these secondary routes is important from the perspective of pollution prevention, because actions can be designed more easily for reducing the environmental impact of APIs compared with the route of direct excretion (via urine and feces), for reducing the incidence of unintentional and purposeful poisonings of humans and pets, and for improving the quality and cost-effectiveness of health care. Overall, unintentional exposure to APIs for humans via these routes is possibly more important than exposure to trace residues recycled from the environment in drinking water or foods.
Martín-Hernández, Raquel; Botías, Cristina; Barrios, Laura; Martínez-Salvador, Amparo; Meana, Aránzazu; Mayack, Christopher; Higes, Mariano
2011-09-01
Nosema ceranae is a relatively new and widespread parasite of the western honeybee Apis mellifera that provokes a new form of nosemosis. In comparison to Nosema apis, which has been infecting the honeybee for much longer, N. ceranae seems to have co-evolved less with this host, causing a more virulent disease. Given that N. apis and N. ceranae are obligate intracellular microsporidian parasites, needing host energy to reproduce, energetic stress may be an important factor contributing to the increased virulence observed. Through feeding experiments on caged bees, we show that both mortality and sugar syrup consumption were higher in N. ceranae-infected bees than in N. apis-infected and control bees. The mortality and sugar syrup consumption are also higher in N. apis-infected bees than in controls, but are less than in N. ceranae-infected bees. With both microsporidia, mortality and sugar syrup consumption increased in function of the increasing spore counts administered for infection. The differences in energetic requirements between both Nosema spp. confirm that their metabolic patterns are not the same, which may depend critically on host-parasite interactions and, ultimately, on host pathology. The repercussions of this increased energetic stress may even explain the changes in host behavior due to starvation, lack of thermoregulatory capacity, or higher rates of trophallaxis, which might enhance transmission and bee death.
Search without Boundaries Using Simple APIs
Tong, Qi
2009-01-01
The U.S. Geological Survey (USGS) Library, where the author serves as the digital services librarian, is increasingly challenged to make it easier for users to find information from many heterogeneous information sources. Information is scattered throughout different software applications (i.e., library catalog, federated search engine, link resolver, and vendor websites), and each specializes in one thing. How could the library integrate the functionalities of one application with another and provide a single point of entry for users to search across? To improve the user experience, the library launched an effort to integrate the federated search engine into the library's intranet website. The result is a simple search box that leverages the federated search engine's built-in application programming interfaces (APIs). In this article, the author describes how this project demonstrated the power of APIs and their potential to be used by other enterprise search portals inside or outside of the library.
Medical Administration: Patient Regulating To and Within the Continental United States
1990-03-30
the muscles, neuromuscular junctions, peripheral nerves, spinal cord, and brain. APY Electroencephalography See EVALUATIONS. APM Electromyography See...Oxygen Ther- apy See EVALUATIONS. SSTX Kidney Transplants See SURGERY/Urology. SSF Morbid Obesity Surgery Patients requiring surgery for morbid obesity...Scans. APG Cytogenetics Patients having, or suspected of having, genetic abnormalities, or chromosomal study is indi- cated. APY
12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation
Code of Federal Regulations, 2010 CFR
2010-01-01
... following simple formula: APY=100 (Interest/Principal) Examples (1) If an institution pays $61.68 in... percentage yield is 5.39%, using the simple formula: APY=100(134.75/2,500) APY=5.39% For $15,000, interest is... Yield Calculation The annual percentage yield measures the total amount of interest paid on an account...
[Staphylococcus aureus infection in Apis mellifera L. (honeybees)].
Keskin, N
1989-07-01
The causative agent of American foulbrood is Bacillus larvae, the causes of the European foulbrood diseases are Streptococcus pluton and Bacillus alvei and the causes of the septicemia are Pseudomonas apiseptica and Escherichia coli in honeybees (Apis mellifera). Apart from the above causative agents in this study, Staphylococcus aureus has been isolated and identified from honeybees (Apis mellifera).
A Guide to Communicating with Asian American Families. For Parents/about Parents.
ERIC Educational Resources Information Center
Schwartz, Wendy
The enrollment of Asian and Pacific Islander (API) students is increasing rapidly, so it is important for school personnel and community members to learn to communicate with API families. This guide describes how the backgrounds and cultures of the various API groups affect their attitudes and behavior. The three general ethnicities within the API…
30 CFR 250.198 - Documents incorporated by reference.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Conditions, May 2007; incorporated by reference at § 250.901; (3) API Bulletin 2INT-EX, Interim Guidance for...; incorporated by reference at § 250.1202; (34) API MPMS, Chapter 11.1—Volume Correction Factors, Volume 1, Table...; (35) API MPMS, Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density...
30 CFR 250.198 - Documents incorporated by reference.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Conditions, May 2007; incorporated by reference at § 250.901; (3) API Bulletin 2INT-EX, Interim Guidance for...; incorporated by reference at § 250.1202; (34) API MPMS, Chapter 11.1—Volume Correction Factors, Volume 1, Table...; (35) API MPMS, Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density...
30 CFR 250.1920 - What are the auditing requirements for my SEMS program?
Code of Federal Regulations, 2011 CFR
2011-07-01
... or your designated and qualified personnel according to the requirements of this subpart and API RP... subpart and API RP 75 to identify areas in which safety and environmental performance needs to be improved. (b) Your audit plan and procedures must meet or exceed all of the recommendations included in API RP...
30 CFR 250.1920 - What are the auditing requirements for my SEMS program?
Code of Federal Regulations, 2012 CFR
2012-07-01
... designated and qualified personnel according to the requirements of this subpart and API RP 75, Section 12... thirteen elements of your SEMS program to evaluate compliance with the requirements of this subpart and API... audit plan and procedures must meet or exceed all of the recommendations included in API RP 75 section...
ERIC Educational Resources Information Center
Choi, Yoonsun
2008-01-01
This study compares problem behaviors across a range of adolescent Asian Pacific Islander (API) subgroups using the Add Health data, and controlling for parental education or immigrant status. The study finds that Filipino, "other" API, and multiethnic API American youth are at higher risk for poorer outcomes than Chinese, Korean, and Vietnamese…
Park, Doori; Jung, Je Won; Lee, Mi Ok; Lee, Si Young; Kim, Boyun; Jin, Hye Jun; Kim, Jiyoung; Ahn, Young-Joon; Lee, Ki Won; Song, Yong Sang; Hong, Seunghun; Womack, James E; Kwon, Hyung Wook
2014-03-01
Insect-derived antimicrobial peptides (AMPs) have diverse effects on antimicrobial properties and pharmacological activities such as anti-inflammation and anticancer properties. Naturally occurring genetic polymorphism have a direct and/or indirect influence on pharmacological effect of AMPs, therefore information on single nucleotide polymorphism (SNP) occurring in natural AMPs provides an important clue to therapeutic applications. Here we identified nucleotide polymorphisms in melittin gene of honey bee populations, which is one of the potent AMP in bee venoms. We found that the novel SNP of melittin gene exists in these two honey bee species, Apis mellifera and Apis cerana. Nine polymorphisms were identified within the coding region of the melittin gene, of which one polymorphism that resulted in serine (Ser) to asparagine (Asp) substitution that can potentially effect on biological activities of melittin peptide. Serine-substituted melittin (Mel-S) showed more cytotoxic effect than asparagine-substituted melittin (Mel-N) against E. coli. Also, Mel-N and Mel-S had different inhibitory effects on the production of inflammatory factors such as IL-6 and TNF-α in BV-2 cells. Moreover, Mel-S showed stronger cytotoxic activities than Mel-N peptide against two human ovarian cancer cell lines. Using carbon nanotube-based transistor, we here characterized that Mel-S interacted with small unilamellar liposomes more strongly than Mel-N. Taken together, our present study demonstrates that there exist different characteristics of the gene frequency and the biological activities of the melittin peptide in two honey bee species, Apis mellifera and A. cerana. Copyright © 2014 Elsevier Inc. All rights reserved.
Cern, Ahuva; Marcus, David; Tropsha, Alexander; Barenholz, Yechezkel; Goldblum, Amiram
2017-04-28
Remote drug loading into nano-liposomes is in most cases the best method for achieving high concentrations of active pharmaceutical ingredients (API) per nano-liposome that enable therapeutically viable API-loaded nano-liposomes, referred to as nano-drugs. This approach also enables controlled drug release. Recently, we constructed computational models to identify APIs that can achieve the desired high concentrations in nano-liposomes by remote loading. While those previous models included a broad spectrum of experimental conditions and dealt only with loading, here we reduced the scope to the molecular characteristics alone. We model and predict API suitability for nano-liposomal delivery by fixing the main experimental conditions: liposome lipid composition and size to be similar to those of Doxil® liposomes. On that basis, we add a prediction of drug leakage from the nano-liposomes during storage. The latter is critical for having pharmaceutically viable nano-drugs. The "load and leak" models were used to screen two large molecular databases in search of candidate APIs for delivery by nano-liposomes. The distribution of positive instances in both loading and leakage models was similar in the two databases screened. The screening process identified 667 molecules that were positives by both loading and leakage models (i.e., both high-loading and stable). Among them, 318 molecules received a high score in both properties and of these, 67 are FDA-approved drugs. This group of molecules, having diverse pharmacological activities, may be the basis for future liposomal drug development. Copyright © 2017 Elsevier B.V. All rights reserved.
Influence of formulation and processing factors on stability of levothyroxine sodium pentahydrate.
Collier, Jarrod W; Shah, Rakhi B; Gupta, Abhay; Sayeed, Vilayat; Habib, Muhammad J; Khan, Mansoor A
2010-06-01
Stability of formulations over shelf-life is critical for having a quality product. Choice of excipients, manufacturing process, storage conditions, and packaging can either mitigate or enhance the degradation of the active pharmaceutical ingredient (API), affecting potency and/or stability. The purpose was to investigate the influence of processing and formulation factors on stability of levothyroxine (API). The API was stored at long-term (25 degrees C/60%RH), accelerated (40 degrees C/75%RH), and low-humidity (25 degrees C/0%RH and 40 degrees C/0%RH) conditions for 28 days. Effect of moisture loss was evaluated by drying it (room temperature, N(2)) and placed at 25 degrees C/0%RH and 40 degrees C/0%RH. The API was incubated with various excipients (based on package insert of marketed tablets) in either 1:1, 1:10, or 1:100 ratios with 5% moisture at 60 degrees C. Commonly used ratios for excipients were used. The equilibrium sorption data was collected on the API and excipients. The API was stable in solid state for the study duration under all conditions for both forms (potency between 90% and 110%). Excipients effect on stability varied and crospovidone, povidone, and sodium laurel sulfate (SLS) caused significant API degradation where deiodination and deamination occurred. Moisture sorption values were different across excipients. Crospovidone and povidone were hygroscopic whereas SLS showed deliquescence at high RH. The transient formulation procedures where temperature might go up or humidity might go down would not have major impact on the API stability. Excipients influence stability and if possible, those three should either be avoided or used in minimum quantity which could provide more stable tablet formulations with minimum potency loss throughout its shelf-life.
Role for apyrases in polar auxin transport in Arabidopsis.
Liu, Xing; Wu, Jian; Clark, Greg; Lundy, Stacey; Lim, Minhui; Arnold, David; Chan, Jing; Tang, Wenqiang; Muday, Gloria K; Gardner, Gary; Roux, Stanley J
2012-12-01
Recent evidence indicates that extracellular nucleotides regulate plant growth. Exogenous ATP has been shown to block auxin transport and gravitropic growth in primary roots of Arabidopsis (Arabidopsis thaliana). Cells limit the concentration of extracellular ATP in part through the activity of ectoapyrases (ectonucleoside triphosphate diphosphohydrolases), and two nearly identical Arabidopsis apyrases, APY1 and APY2, appear to share this function. These findings, plus the fact that suppression of APY1 and APY2 blocks growth in Arabidopsis, suggested that the expression of these apyrases could influence auxin transport. This report tests that hypothesis. The polar movement of [(3)H]indole-3-acetic acid in both hypocotyl sections and primary roots of Arabidopsis seedlings was measured. In both tissues, polar auxin transport was significantly reduced in apy2 null mutants when they were induced by estradiol to suppress the expression of APY1 by RNA interference. In the hypocotyl assays, the basal halves of APY-suppressed hypocotyls contained considerably lower free indole-3-acetic acid levels when compared with wild-type plants, and disrupted auxin transport in the APY-suppressed roots was reflected by their significant morphological abnormalities. When a green fluorescent protein fluorescence signal encoded by a DR5:green fluorescent protein construct was measured in primary roots whose apyrase expression was suppressed either genetically or chemically, the roots showed no signal asymmetry following gravistimulation, and both their growth and gravitropic curvature were inhibited. Chemicals that suppress apyrase activity also inhibit gravitropic curvature and, to a lesser extent, growth. Taken together, these results indicate that a critical step connecting apyrase suppression to growth suppression is the inhibition of polar auxin transport.
Yang, Fengyuan; Su, Yongchao; Zhang, Jingtao; DiNunzio, James; Leone, Anthony; Huang, Chengbin; Brown, Chad D
2016-10-03
The production of amorphous solid dispersions via hot melt extrusion (HME) relies on elevated temperature and prolonged residence time, which can result in potential degradation and decomposition of thermally sensitive components. Herein, the rheological properties of a physical mixture of polymer and an active pharmaceutical ingredient (API) were utilized to guide the selection of appropriate HME processing temperature. In the currently studied copovidone-nifedipine system, a critical temperature, which is substantially lower (∼13 °C) than the melting point of crystalline API, was captured during a temperature ramp examination and regarded as the critical point at which the API could molecularly dissolve into the polymer. Based on the identification of this critical point, various solid dispersions were prepared by HME processing below, at, and above the critical temperature (both below and above the melting temperature (T m ) of crystalline API). In addition, the resultant extrudates along with two control solid dispersions prepared by physical mixing and cryogenic milling were assessed by X-ray diffraction, differential scanning calorimetry, hot stage microscopy, rheology, and solid-state NMR. Physicochemical properties of resultant solid dispersions indicated that the identified critical temperature is sufficient for the polymer-API system to reach a molecular-level mixing, manifested by the transparent and smooth appearance of extrudates, the absence of API crystalline diffraction and melting peaks, dramatically decreased rheological properties, and significantly improved polymer-API miscibility. Once the critical temperature has been achieved, further raising the processing temperature only results in limited improvement of API dispersion, reflected by slightly reduced storage modulus and complex viscosity and limited improvement in miscibility.
Ludvigsen, Jane; Porcellato, Davide; Amdam, Gro V; Rudi, Knut
2018-05-01
The gut microbiota of honeybees (Apis) and bumblebees (Bombus) include the symbiotic bacterial genus Gilliamella. This genus shows a high degree of functional and genomic diversity and separates into distinct lineages. Gilliamella apicola wkB1 T , which was isolated from Apis, was the first species to be described. Recently four new species, isolated from Bombus, were identified. In this paper, we compare several genomes/strains from previous studies spanning this diversity, which gives insight into the phylogenetic relationship among different Gilliamella species. We show that one lineage, isolated only from Apis, is different from other gilliamellas described, based on average nucleotide identity calculation (about 80 %) and phenotypic characterizations. We propose the new species name for this lineage: Gilliamella apis sp. nov. We present the characterization of the type strain NO3 T (=DSM 105629 T =LMG 30293 T ), a strain isolated from the Western honeybee Apis mellifera, which clusters within this lineage. Cells of strain NO3 T grow best in a microaerophilic atmosphere with enhanced CO2 levels at 36 °C and pH 7.0-7.5. Cells also grow well in anaerobic conditions, but not in aerobic conditions. Cells are approximately 1 µm in length and rod-shaped, and the genomic G+C content is 34.7 mol%. Differential characteristics between strain NO3 T and the different type strains of Gilliamella were revealed based on API kit tests and genomic content comparisons. The main respiratory quinone of strain NO3 T was ubiquinone-8, and the predominant fatty acids were C18 : 1ω7c/C18 : 1ω6c, C16 : 0, consistent with the genus Gilliamella.
NASA Astrophysics Data System (ADS)
Urbanova, Martina; Brus, Jiri; Sedenkova, Ivana; Policianova, Olivia; Kobera, Libor
In this contribution the ability of 19F MAS NMR spectroscopy to probe structural variability of poorly water-soluble drugs formulated as solid dispersions in polymer matrices is discussed. The application potentiality of the proposed approach is demonstrated on a moderately sized active pharmaceutical ingredient (API, Atorvastatin) exhibiting extensive polymorphism. In this respect, a range of model systems with the API incorporated in the matrix of polvinylpyrrolidone (PVP) was prepared. The extent of mixing of both components was determined by T1(1H) and T1ρ(1H) relaxation experiments, and it was found that the API forms nanosized domains. Subsequently it was found out that the polymer matrix induces two kinds of changes in 19F MAS NMR spectra. At first, this is a high-frequency shift reaching 2-3 ppm which is independent on molecular structure of the API and which results from the long-range polarization of the electron cloud around 19F nucleus induced by electrostatic fields of the polymer matrix. At second, this is broadening of the signals and formation of shoulders reflecting changes in molecular arrangement of the API. To avoid misleading in the interpretation of the recorded 19F MAS NMR spectra, because both the contributions act simultaneously, we applied chemometric approach based on multivariate analysis. It is demonstrated that factor analysis of the recorded spectra can separate both these spectral contributions, and the subtle structural differences in the molecular arrangement of the API in the nanosized domains can be traced. In this way 19F MAS NMR spectra of both pure APIs and APIs in solid dispersions can be directly compared. The proposed strategy thus provides a powerful tool for the analysis of new formulations of fluorinated pharmaceutical substances in polymer matrices.
Zielonka, Anja; Gedvilaite, Alma; Reetz, Jochen; Rösler, Uwe; Müller, Hermann; Johne, Reimar
2012-12-01
Polyomaviruses are aetiological agents of fatal acute diseases in various bird species. Genomic analysis revealed that avian polyomavirus (APyV), crow polyomavirus (CPyV), finch polyomavirus (FPyV) and goose hemorrhagic polyomavirus (GHPyV) are closely related to each other, but nevertheless form separate viral species; however, their serological relationship was previously unknown. As only APyV can be grown efficiently in tissue culture, virus-like particles (VLPs) were generated by expression of the genomic regions encoding the major structural protein VP1 of these viruses in yeast; these were used to elicit type-specific antibodies in rabbits and as antigens in serological reactions. For increased VLP assembly, a nuclear-localization signal was introduced into APyV-VP1. VLPs derived from the VP1 of the monkey polyomavirus simian virus 40 served as control. APyV-, GHPyV- and CPyV-VLPs showed haemagglutinating activity with chicken and human erythrocytes. CPyV- and GHPyV-specific sera showed slight cross-reactions in immunoblotting, haemagglutination-inhibition assay and indirect ELISA. The FPyV-specific serum inhibited the haemagglutination activity of APyV-VLPs slightly and showed a weak cross-neutralizing activity against APyV in cell-culture tests. Generally, these data indicate that the four polyomaviruses of birds are serologically distinct. However, in accordance with genetic data, a relationship between CPyV and GHPyV as well as between APyV and FPyV is evident, and grouping into two different serogroups may be suggested. The haemagglutinating activity of APyV, CPyV and GHPyV may indicate similar receptor-binding mechanisms for these viruses. Our data could be useful for the development of vaccines against the polyomavirus-induced diseases in birds and for interpretation of diagnostic test results.
Theil, Frank; Milsmann, Johanna; Anantharaman, Sankaran; van Lishaut, Holger
2018-05-07
The preparation of an amorphous solid dispersion (ASD) by dissolving a poorly water-soluble active pharmaceutical ingredient (API) in a polymer matrix can improve the bioavailability by orders of magnitude. Crystallization of the API in the ASD, though, is an inherent threat for bioavailability. Commonly, the impact of crystalline API on the drug release of the dosage form is studied with samples containing spiked crystallinity. These spiked samples possess implicit differences compared to native crystalline samples, regarding size and spatial distribution of the crystals as well as their molecular environment. In this study, we demonstrate that it is possible to grow defined amounts of crystalline API in solid dosage forms, which enables us to study the biopharmaceutical impact of actual crystallization. For this purpose, we studied the crystal growth in fenofibrate tablets over time under an elevated moisture using transmission Raman spectroscopy (TRS). As a nondestructive method to assess API crystallinity in ASD formulations, TRS enables the monitoring of crystal growth in individual dosage forms. Once the kinetic trace of the crystal growth for a certain environmental condition is determined, this method can be used to produce samples with defined amounts of crystallized API. To investigate the biopharmaceutical impact of crystallized API, non-QC dissolution methods were used, designed to identify differences between the various amounts of crystalline materials present. The drug release in the samples manufactured in this fashion was compared to that of samples with spiked crystallinity. In this study, we present for the first time a method for targeted crystallization of amorphous tablets to simulate crystallized ASDs. This methodology is a valuable tool to generate model systems for biopharmaceutical studies on the impact of crystallinity on the bioavailability.
Khafipour, E; Plaizier, J C; Aikman, P C; Krause, D O
2011-01-01
Previous studies indicated that only subacute ruminal acidosis (SARA), induced by feeding a high-grain diet, is associated with an inflammatory response and increased abundance of Escherichia coli in the rumen. We hypothesized that ruminal E. coli in grain pellet-induced SARA carried virulence factors that potentially contribute to the immune activation during SARA. One hundred twenty-nine E. coli isolates were cultured from the rumens of 8 cows (4 animals per treatment) in which SARA had been nutritionally induced by feeding a high-grain diet (GPI-SARA) or a diet containing alfalfa pellets (API-SARA). The population structure of the E. coli was evaluated with the ABD genotyping system and repetitive sequence-based (rep)-PCR fingerprinting. Twenty-five virulence factors were evaluated with PCR. Escherichia coli numbers were higher in the GPI-SARA treatment than in the API-SARA treatment. The genetic structure of the E. coli was significantly different between SARA challenge models. Isolates from GPI-control (46%), API-control (70%), and API-SARA (53%) were closely related and fell into one cluster, whereas isolates from GPI-SARA (54%) grouped separately. The ABD typing indicated a shift from an A-type E. coli population to a B1-type population only due to GPI-SARA. Of the 25 virulence factors tested, curli fiber genes were highly associated with GPI. Curli fibers were first identified in E. coli mastitis isolates and are potent virulence factors that induce a range of immune responses. Results suggest that under low rumen pH conditions induced by a grain diet, there is a burst in the number of E. coli with virulence genes that can take advantage of these rumen conditions to trigger an inflammatory response. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wieczorek, L.M.; Barnes, D.A.
1989-08-01
Lithofacies comprising the massive sand in the Michigan basin are very similar to the lithofacies of the St. Peter Sandstone in parts of the adjacent Midwestern basin and arches region. Lithostratigraphic and biostratigraphic correlations justify application of the name St. Peter Sandstone to the gas-productive massive sand in the Michigan basin. Four lithofacies have been determined by core-log integration. The two lowermost lithofacies (1 and 2) were deposited in marginal-marine peritidal shoreface to sand-flat environments. Lithofacies 1A comprises cross-bedded, quartz-cemented quartzarenites. Lithofacies 1B comprises dolomitic, cross-bedded, subfeldspathic arenites. Lithofacies 1A is recognized in logs by low gamma-ray response (less thanmore » 20-25 API units) and photoelectric effect (Pe) of 1.8. Lithofacies 1B log characteristics include low gamma ray response (15-30 API units) and Pe of 2-2.5. Lithofacies 2 log signatures include moderate to high gamma-ray (30-120 API units) and Pe values that range from 2.5-3.5. The uppermost two lithofacies (3 and 4) were deposited in storm-dominated lower shoreface, to offshore, to distal marine shelf environments. Lithofacies 3 consists of burrowed, massive, wavy to planar stratified quartzarenites to subfeldspathic arenites. Log signature is generally low gamma-ray response (15-30 API units) and Pe that ranges from 1.8 to 2.5. Lithofacies 4 consists of massive, burrowed and bioturbated, dominantly authigenic clay and dolomite-cemented subfeldspathic arenite. Lithofacies 4 log response is moderate to high gamma-ray response (30-105 API units) and Pe ranging from 2.25 to 3.5.« less
DAX - The Next Generation: Towards One Million Processes on Commodity Hardware.
Damon, Stephen M; Boyd, Brian D; Plassard, Andrew J; Taylor, Warren; Landman, Bennett A
2017-01-01
Large scale image processing demands a standardized way of not only storage but also a method for job distribution and scheduling. The eXtensible Neuroimaging Archive Toolkit (XNAT) is one of several platforms that seeks to solve the storage issues. Distributed Automation for XNAT (DAX) is a job control and distribution manager. Recent massive data projects have revealed several bottlenecks for projects with >100,000 assessors (i.e., data processing pipelines in XNAT). In order to address these concerns, we have developed a new API, which exposes a direct connection to the database rather than REST API calls to accomplish the generation of assessors. This method, consistent with XNAT, keeps a full history for auditing purposes. Additionally, we have optimized DAX to keep track of processing status on disk (called DISKQ) rather than on XNAT, which greatly reduces load on XNAT by vastly dropping the number of API calls. Finally, we have integrated DAX into a Docker container with the idea of using it as a Docker controller to launch Docker containers of image processing pipelines. Using our new API, we reduced the time to create 1,000 assessors (a sub-cohort of our case project) from 65040 seconds to 229 seconds (a decrease of over 270 fold). DISKQ, using pyXnat, allows launching of 400 jobs in under 10 seconds which previously took 2,000 seconds. Together these updates position DAX to support projects with hundreds of thousands of scans and to run them in a time-efficient manner.
DAX - the next generation: towards one million processes on commodity hardware
NASA Astrophysics Data System (ADS)
Damon, Stephen M.; Boyd, Brian D.; Plassard, Andrew J.; Taylor, Warren; Landman, Bennett A.
2017-03-01
Large scale image processing demands a standardized way of not only storage but also a method for job distribution and scheduling. The eXtensible Neuroimaging Archive Toolkit (XNAT) is one of several platforms that seeks to solve the storage issues. Distributed Automation for XNAT (DAX) is a job control and distribution manager. Recent massive data projects have revealed several bottlenecks for projects with <100,000 assessors (i.e., data processing pipelines in XNAT). In order to address these concerns, we have developed a new API, which exposes a direct connection to the database rather than REST API calls to accomplish the generation of assessors. This method, consistent with XNAT, keeps a full history for auditing purposes. Additionally, we have optimized DAX to keep track of processing status on disk (called DISKQ) rather than on XNAT, which greatly reduces load on XNAT by vastly dropping the number of API calls. Finally, we have integrated DAX into a Docker container with the idea of using it as a Docker controller to launch Docker containers of image processing pipelines. Using our new API, we reduced the time to create 1,000 assessors (a sub-cohort of our case project) from 65040 seconds to 229 seconds (a decrease of over 270 fold). DISKQ, using pyXnat, allows launching of 400 jobs in under 10 seconds which previously took 2,000 seconds. Together these updates position DAX to support projects with hundreds of thousands of scans and to run them in a time-efficient manner.
DAX - The Next Generation: Towards One Million Processes on Commodity Hardware
Boyd, Brian D.; Plassard, Andrew J.; Taylor, Warren; Landman, Bennett A.
2017-01-01
Large scale image processing demands a standardized way of not only storage but also a method for job distribution and scheduling. The eXtensible Neuroimaging Archive Toolkit (XNAT) is one of several platforms that seeks to solve the storage issues. Distributed Automation for XNAT (DAX) is a job control and distribution manager. Recent massive data projects have revealed several bottlenecks for projects with >100,000 assessors (i.e., data processing pipelines in XNAT). In order to address these concerns, we have developed a new API, which exposes a direct connection to the database rather than REST API calls to accomplish the generation of assessors. This method, consistent with XNAT, keeps a full history for auditing purposes. Additionally, we have optimized DAX to keep track of processing status on disk (called DISKQ) rather than on XNAT, which greatly reduces load on XNAT by vastly dropping the number of API calls. Finally, we have integrated DAX into a Docker container with the idea of using it as a Docker controller to launch Docker containers of image processing pipelines. Using our new API, we reduced the time to create 1,000 assessors (a sub-cohort of our case project) from 65040 seconds to 229 seconds (a decrease of over 270 fold). DISKQ, using pyXnat, allows launching of 400 jobs in under 10 seconds which previously took 2,000 seconds. Together these updates position DAX to support projects with hundreds of thousands of scans and to run them in a time-efficient manner. PMID:28919661
Alqarni, Abdulaziz S; Hannan, Mohammed A; Owayss, Ayman A; Engel, Michael S
2011-01-01
Apis mellifera jemenitica Ruttner (= yemenitica auctorum: videEngel 1999) has been used in apiculture throughout the Arabian Peninsula since at least 2000 BC. Existing literature demonstrates that these populations are well adapted for the harsh extremes of the region. Populations of Apis mellifera jemenitica native to Saudi Arabia are far more heat tolerant than the standard races often imported from Europe. Central Saudi Arabia has the highest summer temperatures for the Arabian Peninsula, and it is in this region where only Apis mellifera jemenitica survives, while other subspecies fail to persist. The indigenous race of Saudi Arabia differs from other subspecies in the region in some morphological, biological, and behavioral characteristics. Further taxonomic investigation, as well as molecular studies, is needed in order to confirm whether the Saudi indigenous bee populations represent a race distinct from Apis mellifera jemenitica, or merely an ecotype of this subspecies.
Jetzer, M W; Morrical, B D; Schneider, M; Edge, S; Imanidis, G
2018-03-01
The in-vitro aerosol performance of two combination dry powder inhaler (DPI) products, Foster ® NEXThaler ® and Seretide ® Diskus ® were investigated with single particle aerosol mass spectrometry (SPAMS). The in-vitro pharmaceutical performance is markedly different for both inhalers. Foster ® NEXThaler ® generates a higher fine particle fraction (FPF <5 μm) and a much higher relative extra fine particle fraction (eFPF <2 μm). In terms of the composition of the aerodynamic particle size distribution (APSD), it could be verified with SPAMS that overall Foster ® NEXThaler ® emits a significantly higher number of fine and extra fine particles with a median aerodynamic diameter (MAD) of 2.1 μm while Seretide ® Diskus ® had a larger MAD of 3.1 μm. Additionally, the interactions between the two active pharmaceutical ingredients (APIs) in both products are different. While Seretide ® Diskus ® emits a significant (37%) number of co-associated API particles, only a negligible number of co-associated API particles were found in Foster ® NEXThaler ® (<1%). A major difference with Foster ® NEXThaler ® is that it contains magnesium stearate (MgSt) as a second excipient besides lactose in a so-called 'dual excipient' platform. The data generated using SPAMS suggested that nearly all of the beclomethasone dipropionate particles in Foster ® NEXThaler ® also contain MgSt and must therefore be co-associated with this additional excipient. This may help explain why beclomethasone dipropionate in Foster ® NEXThaler ® forms less particle co-associations with the second API, formoterol fumarate, shows a lower cohesive strength in respect to beclomethasone itself and why both APIs exhibit superior detachment from the carrier as evidenced by the increased eFPF and smaller MAD. Copyright © 2018 Elsevier B.V. All rights reserved.
Environmental contaminants of health-care origin: Exposure and potential effects in wildlife
Bean, Thomas; Rattner, Barnett A.
2018-01-01
A diverse range of fauna could be exposed to active pharmaceutical ingredients (APIs) via diet, dermal absorption or bioconcentration. Low level exposures of free-ranging wildlife to APIs has only been demonstrated for a few pathways (e.g., ingestion of fish in estuaries by piscivorous birds), and many remain hypothetical (e.g., ingestion of invertebrates in sludge amended fields by terrestrial vertebrates). Our understanding of API dose-response relationships in wildlife have only been assessed for endocrine disrupting compounds and a few veterinary therapeutics. Drug specific responses at various levels of biological organization are poorly characterized for nearly all wildlife species, and thus our understanding of risk is limited. There is interest in using a read-across approach to fill knowledge gaps for risk. This approach, using data collected in laboratory mammals and humans, would enable predictions for likelihood of adverse effects in wildlife. Given the great diversities in physiologies among species, a combination of in vivo, in vitro and in silico approaches will be required to fill the knowledge gaps for exposure, hazard and risk.
Miniature Brain Decision Making in Complex Visual Environments
2008-07-18
release; distribution unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT The grantee investigated, using the honeybee ( Apis mellifera ) as a model...successful for understanding face processing in both human adults and infants. Individual honeybees ( Apis mellifera ) were trained with...for 30 bees (group 3) of the target stimuli. Bernard J, Stach S, Giurfa M (2007) Categorization of visual stimuli in the honeybee Apis mellifera
USDA-ARS?s Scientific Manuscript database
Survival of Ascosphaera aggregata and A. apis over the course of a year were tested using different storage treatments. For spores, the methods tested were freeze drying and ultra-low temperature storage, and for hyphae, freeze drying, agar slants covered with water, and two methods of ultra-low tem...
There-apy: The Use of Task, Imagery, and Symbolism To Connect the Inner and Outer Worlds.
ERIC Educational Resources Information Center
Eisenstein-Naveh, A. Rosa
2001-01-01
Presents a model of therapy called there-apy, which weaves together the use of task, symbolism, and imagery into an ongoing process. Concrete tasks take on symbolic meaning, and symbolism gets actualized through achieving concrete tasks. There-apy connects the individual's outside and inside worlds and often involves the partner or family in the…
Code of Federal Regulations, 2014 CFR
2014-10-01
... accompanied by supporting materials sufficient to calculate required adjustments to each PCI, API, and SBI... that results in an API value that is equal to or less than the applicable PCI value, must be... proposed rates. (d) Each price cap tariff filing that proposes rates that will result in an API value that...
30 CFR 250.920 - What are the BSEE requirements for assessment of fixed platforms?
Code of Federal Regulations, 2012 CFR
2012-07-01
.... Assessment categories are defined in API RP 2A-WSD, Section 17.3 (as incorporated by reference in § 250.198... of API RP 2A-WSD, incorporated by reference in § 250.198, for a description of assessment initiators). (c) You must initiate mitigation actions for platforms that do not pass the assessment process of API...
30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...
Code of Federal Regulations, 2013 CFR
2013-10-01
... accompanied by supporting materials sufficient to calculate required adjustments to each PCI, API, and SBI... that results in an API value that is equal to or less than the applicable PCI value, must be... proposed rates. (d) Each price cap tariff filing that proposes rates that will result in an API value that...
30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...
30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...
30 CFR 250.920 - What are the BSEE requirements for assessment of fixed platforms?
Code of Federal Regulations, 2013 CFR
2013-07-01
.... Assessment categories are defined in API RP 2A-WSD, Section 17.3 (as incorporated by reference in § 250.198... of API RP 2A-WSD, incorporated by reference in § 250.198, for a description of assessment initiators). (c) You must initiate mitigation actions for platforms that do not pass the assessment process of API...
Code of Federal Regulations, 2012 CFR
2012-10-01
... accompanied by supporting materials sufficient to calculate required adjustments to each PCI, API, and SBI... that results in an API value that is equal to or less than the applicable PCI value, must be... proposed rates. (d) Each price cap tariff filing that proposes rates that will result in an API value that...
30 CFR 250.920 - What are the BSEE requirements for assessment of fixed platforms?
Code of Federal Regulations, 2014 CFR
2014-07-01
.... Assessment categories are defined in API RP 2A-WSD, Section 17.3 (as incorporated by reference in § 250.198... of API RP 2A-WSD, incorporated by reference in § 250.198, for a description of assessment initiators). (c) You must initiate mitigation actions for platforms that do not pass the assessment process of API...
Code of Federal Regulations, 2011 CFR
2011-10-01
... accompanied by supporting materials sufficient to calculate required adjustments to each PCI, API, and SBI... that results in an API value that is equal to or less than the applicable PCI value, must be... proposed rates. (d) Each price cap tariff filing that proposes rates that will result in an API value that...
USDA-ARS?s Scientific Manuscript database
In this study we developed a multiplex PCR for identification of mating type idiomorphs in the filamentous fungus, Ascosphaera apis, the causative agent of chalkbrood disease in the honey bee (Apis melliffera). A combination of gene-specific primers was designed to amplify Mat1-1 and Mat1-2 gene fra...
Internet SCADA Utilizing API's as Data Source
NASA Astrophysics Data System (ADS)
Robles, Rosslin John; Kim, Haeng-Kon; Kim, Tai-Hoon
An Application programming interface or API is an interface implemented by a software program that enables it to interact with other software. Many companies provide free API services which can be utilized in Control Systems. SCADA is an example of a control system and it is a system that collects data from various sensors at a factory, plant or in other remote locations and then sends this data to a central computer which then manages and controls the data. In this paper, we designed a scheme for Weather Condition in Internet SCADA Environment utilizing data from external API services. The scheme was designed to double check the weather information in SCADA.
The JANA calibrations and conditions database API
NASA Astrophysics Data System (ADS)
Lawrence, David
2010-04-01
Calibrations and conditions databases can be accessed from within the JANA Event Processing framework through the API defined in its JCalibration base class. The API is designed to support everything from databases, to web services to flat files for the backend. A Web Service backend using the gSOAP toolkit has been implemented which is particularly interesting since it addresses many modern cybersecurity issues including support for SSL. The API allows constants to be retrieved through a single line of C++ code with most of the context, including the transport mechanism, being implied by the run currently being analyzed and the environment relieving developers from implementing such details.
Modrzynska, Katarzyna; Pfander, Claudia; Chappell, Lia; Yu, Lu; Suarez, Catherine; Dundas, Kirsten; Gomes, Ana Rita; Goulding, David; Rayner, Julian C; Choudhary, Jyoti; Billker, Oliver
2017-01-11
A family of apicomplexa-specific proteins containing AP2 DNA-binding domains (ApiAP2s) was identified in malaria parasites. This family includes sequence-specific transcription factors that are key regulators of development. However, functions for the majority of ApiAP2 genes remain unknown. Here, a systematic knockout screen in Plasmodium berghei identified ten ApiAP2 genes that were essential for mosquito transmission: four were critical for the formation of infectious ookinetes, and three were required for sporogony. We describe non-essential functions for AP2-O and AP2-SP proteins in blood stages, and identify AP2-G2 as a repressor active in both asexual and sexual stages. Comparative transcriptomics across mutants and developmental stages revealed clusters of co-regulated genes with shared cis promoter elements, whose expression can be controlled positively or negatively by different ApiAP2 factors. We propose that stage-specific interactions between ApiAP2 proteins on partly overlapping sets of target genes generate the complex transcriptional network that controls the Plasmodium life cycle. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.
JEnsembl: a version-aware Java API to Ensembl data systems.
Paterson, Trevor; Law, Andy
2012-11-01
The Ensembl Project provides release-specific Perl APIs for efficient high-level programmatic access to data stored in various Ensembl database schema. Although Perl scripts are perfectly suited for processing large volumes of text-based data, Perl is not ideal for developing large-scale software applications nor embedding in graphical interfaces. The provision of a novel Java API would facilitate type-safe, modular, object-orientated development of new Bioinformatics tools with which to access, analyse and visualize Ensembl data. The JEnsembl API implementation provides basic data retrieval and manipulation functionality from the Core, Compara and Variation databases for all species in Ensembl and EnsemblGenomes and is a platform for the development of a richer API to Ensembl datasources. The JEnsembl architecture uses a text-based configuration module to provide evolving, versioned mappings from database schema to code objects. A single installation of the JEnsembl API can therefore simultaneously and transparently connect to current and previous database instances (such as those in the public archive) thus facilitating better analysis repeatability and allowing 'through time' comparative analyses to be performed. Project development, released code libraries, Maven repository and documentation are hosted at SourceForge (http://jensembl.sourceforge.net).
Bakri, Barbara; Weimer, Marco; Hauck, Gerrit; Reich, Gabriele
2015-11-01
Scope of the study was (1) to develop a lean quantitative calibration for real-time near-infrared (NIR) blend monitoring, which meets the requirements in early development of pharmaceutical products and (2) to compare the prediction performance of this approach with the results obtained from stratified sampling using a sample thief in combination with off-line high pressure liquid chromatography (HPLC) and at-line near-infrared chemical imaging (NIRCI). Tablets were manufactured from powder blends and analyzed with NIRCI and HPLC to verify the real-time results. The model formulation contained 25% w/w naproxen as a cohesive active pharmaceutical ingredient (API), microcrystalline cellulose and croscarmellose sodium as cohesive excipients and free-flowing mannitol. Five in-line NIR calibration approaches, all using the spectra from the end of the blending process as reference for PLS modeling, were compared in terms of selectivity, precision, prediction accuracy and robustness. High selectivity could be achieved with a "reduced" approach i.e. API and time saving approach (35% reduction of API amount) based on six concentration levels of the API with three levels realized by three independent powder blends and the additional levels obtained by simply increasing the API concentration in these blends. Accuracy and robustness were further improved by combining this calibration set with a second independent data set comprising different excipient concentrations and reflecting different environmental conditions. The combined calibration model was used to monitor the blending process of independent batches. For this model formulation the target concentration of the API could be achieved within 3 min indicating a short blending time. The in-line NIR approach was verified by stratified sampling HPLC and NIRCI results. All three methods revealed comparable results regarding blend end point determination. Differences in both mean API concentration and RSD values could be attributed to differences in effective sample size and thief sampling errors. This conclusion was supported by HPLC and NIRCI analysis of tablets manufactured from powder blends after different blending times. In summary, the study clearly demonstrates the ability to develop efficient and robust quantitative calibrations for real-time NIR powder blend monitoring with a reduced set of powder blends while avoiding any bias caused by physical sampling. Copyright © 2015 Elsevier B.V. All rights reserved.
Early pharmaceutical profiling to predict oral drug absorption: current status and unmet needs.
Bergström, Christel A S; Holm, René; Jørgensen, Søren Astrup; Andersson, Sara B E; Artursson, Per; Beato, Stefania; Borde, Anders; Box, Karl; Brewster, Marcus; Dressman, Jennifer; Feng, Kung-I; Halbert, Gavin; Kostewicz, Edmund; McAllister, Mark; Muenster, Uwe; Thinnes, Julian; Taylor, Robert; Mullertz, Anette
2014-06-16
Preformulation measurements are used to estimate the fraction absorbed in vivo for orally administered compounds and thereby allow an early evaluation of the need for enabling formulations. As part of the Oral Biopharmaceutical Tools (OrBiTo) project, this review provides a summary of the pharmaceutical profiling methods available, with focus on in silico and in vitro models typically used to forecast active pharmaceutical ingredient's (APIs) in vivo performance after oral administration. An overview of the composition of human, animal and simulated gastrointestinal (GI) fluids is provided and state-of-the art methodologies to study API properties impacting on oral absorption are reviewed. Assays performed during early development, i.e. physicochemical characterization, dissolution profiles under physiological conditions, permeability assays and the impact of excipients on these properties are discussed in detail and future demands on pharmaceutical profiling are identified. It is expected that innovative computational and experimental methods that better describe molecular processes involved in vivo during dissolution and absorption of APIs will be developed in the OrBiTo. These methods will provide early insights into successful pathways (medicinal chemistry or formulation strategy) and are anticipated to increase the number of new APIs with good oral absorption being discovered. Copyright © 2013 Elsevier B.V. All rights reserved.
Rios-Romenets, S.; Giraldo-Chica, M.; López, H.; Piedrahita, F.; Ramos, C.; Acosta-Baena, N.; Muñoz, C.; Ospina, P.; Tobón, C.; Cho, W.; Ward, M.; Langbaum, J.B.; Tariot, P.N.; Reiman, E.M.; Lopera, F.
2018-01-01
The Alzheimer’s Prevention Initiative (API) Autosomal Dominant Alzheimer’s Disease (ADAD) trial evaluates the anti-amyloid-β antibody crenezumab in cognitively unimpaired persons who, based on genetic background and age, are at high imminent risk of clinical progression, and provides a powerful test of the amyloid hypothesis. The Neurosciences Group of Antioquia implemented a pre-screening process with the goals of decreasing screen failures and identifying participants most likely to adhere to trial requirements of the API ADAD trial in cognitively unimpaired members of Presenilin1 E280A mutation kindreds. The pre-screening failure rate was 48.2%: the primary reason was expected inability to comply with the protocol, chiefly due to work requirements. More carriers compared to non-carriers, and more males compared to females, failed pre-screening. Carriers with illiteracy or learning/comprehension difficulties failed pre-screening more than non-carriers. With the Colombian API Registry and our prescreening efforts, we randomized 169 30–60 year-old cognitively unimpaired carriers and 83 non-carriers who agreed to participate in the trial for at least 60 months. Our findings suggest multiple benefits of implementing a pre-screening process for enrolling prevention trials in ADAD. PMID:29405233
Pollination Requirements of Almond (Prunus dulcis): Combining Laboratory and Field Experiments.
Henselek, Yuki; Eilers, Elisabeth J; Kremen, Claire; Hendrix, Stephen D; Klein, Alexandra-Maria
2018-05-28
Almond (Prunus dulcis (Mill.) D. A. Webb; Rosales: Rosaceae) is a cash crop with an estimated global value of over seven billion U.S. dollars annually and commercial varieties are highly dependent on insect pollination. Therefore, the understanding of basic pollination requirements of the main varieties including pollination efficiency of honey bees (Apis mellifera, Linnaeus, Hymenoptera: Apidae) and wild pollinators is essential for almond production. We first conducted two lab experiments to examine the threshold number of pollen grains needed for successful pollination and to determine if varietal identity or diversity promotes fruit set and weight. Further, we examined stigma and ovules of flowers visited by Apis and non-Apis pollinators in the field to study the proportion of almond to non-almond pollen grains deposited, visitation time per flower visit, and tube set. Results indicate that the threshold for successful fertilization is around 60 pollen grains, but pollen can be from any compatible variety as neither pollen varietal identity nor diversity enhanced fruit set or weight. Andrena cerasifolii Cockerell (Hymenoptera: Andrenidae) was a more effective pollinator on a per single visit basis than Apis and syrphid flies. Nevertheless, Apis was more efficient than A. cerasifolii and syrphid flies as they spent less time on a flower during a single visit. Hence, planting with two compatible varieties and managing for both Apis and non-Apis pollinators is likely to be an optimal strategy for farmers to secure high and stable pollination success.
NASA Astrophysics Data System (ADS)
Yudaniayanti, Ira Sari; Primarizky, Hardany; Nangoi, Lianny
2018-04-01
Osteoporosis is a chronic skeletal disease characterized by low bone mass and microarchitectural deterioration with a consequent increase in bone fragility and fracture risk. The aim of the study was to evaluate the effects of honey (Apis dorsata) supplements on increased bone strength in ovariectomized rat as animal models of osteoporosis. Twenty female rats at 3 months of age, weighing 150-200 g were used in the study. The rats were divided into five groups (n=4) : Sham operation group (SH); ovariectomy group no treatment(OVX); ovariectomy with treatment Apis dorsata 1g/Kg BW (AD-1); ovariectomy with treatment Apis dorsata 2g/Kg BW (AD-2); ovariectomy with treatment Apis dorsata 4g/Kg BW (AD-3). The treatment started to be given the next day after ovariectomy operation for 12 weeks. The Rats were sacrified within 12 weeks, and then the right femur were taken bone strength test. Based on the statistical analysis of the bone strength test, the greatest score belongs to the Sham operation group (SH) that have significant difference (p<0.05) with OVX group and AD-1 group, but there was no significant difference with AD-2 and AD-3 (p>0,05). In conclusion, honey (Apis dorsata) supplements has the effect of increasing bone strength in ovariectomized rat as animal models of osteoporosis, so that honey (Apis dorsata) supplements has the potential to be used as an alternative treatment for osteoporosis.
Validation results of specifications for motion control interoperability
NASA Astrophysics Data System (ADS)
Szabo, Sandor; Proctor, Frederick M.
1997-01-01
The National Institute of Standards and Technology (NIST) is participating in the Department of Energy Technologies Enabling Agile Manufacturing (TEAM) program to establish interface standards for machine tool, robot, and coordinate measuring machine controllers. At NIST, the focus is to validate potential application programming interfaces (APIs) that make it possible to exchange machine controller components with a minimal impact on the rest of the system. This validation is taking place in the enhanced machine controller (EMC) consortium and is in cooperation with users and vendors of motion control equipment. An area of interest is motion control, including closed-loop control of individual axes and coordinated path planning. Initial tests of the motion control APIs are complete. The APIs were implemented on two commercial motion control boards that run on two different machine tools. The results for a baseline set of APIs look promising, but several issues were raised. These include resolving differing approaches in how motions are programmed and defining a standard measurement of performance for motion control. This paper starts with a summary of the process used in developing a set of specifications for motion control interoperability. Next, the EMC architecture and its classification of motion control APIs into two classes, Servo Control and Trajectory Planning, are reviewed. Selected APIs are presented to explain the basic functionality and some of the major issues involved in porting the APIs to other motion controllers. The paper concludes with a summary of the main issues and ways to continue the standards process.
Shibata, Shigemori; Kawano, Hiroaki; Maemura, Koji
Objective The Nagasaki Kunchi Festival is one of the most famous festivals in Nagasaki. The bearers the floats that are used in this festival undergo long-term training for the performance. However, there have not been any studies on the effects of this training on the health of the float bearers. Methods Thirty-four men ranging in age from 20 to 49 years (mean age: 35.77.6 years) were included in the study. We examined the following parameters before and after the training: body weight (BW), body mass index (BMI), body fat percentage, muscle volume, systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse rate (PR), pulse pressure (PP), bearing power, arterial pressure volume index (API), and arterial velocity pulse index (AVI). Results For all participants, the BW, BMI, body fat percentage, and PR were significantly decreased, and the muscle volume and bearing power were significantly increased after the training; however, there were no significant changes in the SBP, DBP, PP, API, or AVI. In the participants with hypertension, in addition to decreases in BW, BMI, body fat percentage, PR, and PP, the SBP, DBP, and API were significantly decreased after the training. Conclusion Training for bearing a float during Nagasaki Kunchi effectively improved the body structure of all participants and reduced the BP and API in participants with hypertension.
Effects of Long-term Physical Training on the Bearers of a Float during the Nagasaki Kunchi Festival
Shibata, Shigemori; Kawano, Hiroaki; Maemura, Koji
2017-01-01
Objective The Nagasaki Kunchi Festival is one of the most famous festivals in Nagasaki. The bearers the floats that are used in this festival undergo long-term training for the performance. However, there have not been any studies on the effects of this training on the health of the float bearers. Methods Thirty-four men ranging in age from 20 to 49 years (mean age: 35.7±7.6 years) were included in the study. We examined the following parameters before and after the training: body weight (BW), body mass index (BMI), body fat percentage, muscle volume, systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse rate (PR), pulse pressure (PP), bearing power, arterial pressure volume index (API), and arterial velocity pulse index (AVI). Results For all participants, the BW, BMI, body fat percentage, and PR were significantly decreased, and the muscle volume and bearing power were significantly increased after the training; however, there were no significant changes in the SBP, DBP, PP, API, or AVI. In the participants with hypertension, in addition to decreases in BW, BMI, body fat percentage, PR, and PP, the SBP, DBP, and API were significantly decreased after the training. Conclusion Training for bearing a float during Nagasaki Kunchi effectively improved the body structure of all participants and reduced the BP and API in participants with hypertension. PMID:28049988
ERIC Educational Resources Information Center
Wang, Kening; Mulvenon, Sean W.; Stegman, Charles; Anderson, Travis
2008-01-01
Google Maps API (Application Programming Interface), released in late June 2005 by Google, is an amazing technology that allows users to embed Google Maps in their own Web pages with JavaScript. Google Maps API has accelerated the development of new Google Maps based applications. This article reports a Web-based interactive mapping system…
2012-02-21
Summary of Proposed Additive Packages for API /IP 1581 4th Edition ...................................... 4 Table 2. Summary of DoD Test Results...15 Table 8. ISO 4406 Cleanliness Codes for the API /IP 1581 5th Edition...Improver WSIM Water Separation Index Measure NSN National Stock Number API American Petroleum Institute DESC Defense Energy Support Center DOE Design of
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2013 CFR
2013-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2011 CFR
2011-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2010 CFR
2010-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2012 CFR
2012-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2014 CFR
2014-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
Using the RxNorm web services API for quality assurance purposes.
Peters, Lee; Bodenreider, Olivier
2008-11-06
Auditing large, rapidly evolving terminological systems is still a challenge. In the case of RxNorm, a standardized nomenclature for clinical drugs, we argue that quality assurance processes can benefit from the recently released application programming interface (API) provided by RxNav. We demonstrate the usefulness of the API by performing a systematic comparison of alternative paths in the RxNorm graph, over several thousands of drug entities. This study revealed potential errors in RxNorm, currently under review. The results also prompted us to modify the implementation of RxNav to navigate the RxNorm graph more accurately. The RxNav web services API used in this experiment is robust and fast.
Using the RxNorm Web Services API for Quality Assurance Purposes
Peters, Lee; Bodenreider, Olivier
2008-01-01
Auditing large, rapidly evolving terminological systems is still a challenge. In the case of RxNorm, a standardized nomenclature for clinical drugs, we argue that quality assurance processes can benefit from the recently released application programming interface (API) provided by RxNav. We demonstrate the usefulness of the API by performing a systematic comparison of alternative paths in the RxNorm graph, over several thousands of drug entities. This study revealed potential errors in RxNorm, currently under review. The results also prompted us to modify the implementation of RxNav to navigate the RxNorm graph more accurately. The RxNorm web services API used in this experiment is robust and fast. PMID:18999038
From WSN towards WoT: Open API Scheme Based on oneM2M Platforms.
Kim, Jaeho; Choi, Sung-Chan; Ahn, Il-Yeup; Sung, Nak-Myoung; Yun, Jaeseok
2016-10-06
Conventional computing systems have been able to be integrated into daily objects and connected to each other due to advances in computing and network technologies, such as wireless sensor networks (WSNs), forming a global network infrastructure, called the Internet of Things (IoT). To support the interconnection and interoperability between heterogeneous IoT systems, the availability of standardized, open application programming interfaces (APIs) is one of the key features of common software platforms for IoT devices, gateways, and servers. In this paper, we present a standardized way of extending previously-existing WSNs towards IoT systems, building the world of the Web of Things (WoT). Based on the oneM2M software platforms developed in the previous project, we introduce a well-designed open API scheme and device-specific thing adaptation software (TAS) enabling WSN elements, such as a wireless sensor node, to be accessed in a standardized way on a global scale. Three pilot services are implemented (i.e., a WiFi-enabled smart flowerpot, voice-based control for ZigBee-connected home appliances, and WiFi-connected AR.Drone control) to demonstrate the practical usability of the open API scheme and TAS modules. Full details on the method of integrating WSN elements into three example systems are described at the programming code level, which is expected to help future researchers in integrating their WSN systems in IoT platforms, such as oneM2M. We hope that the flexibly-deployable, easily-reusable common open API scheme and TAS-based integration method working with the oneM2M platforms will help the conventional WSNs in diverse industries evolve into the emerging WoT solutions.
França, Luís; Simões, Catarina; Taborda, Marco; Diogo, Catarina; da Costa, Milton S.
2015-01-01
Over a period of ten months a total of 5618 cord blood units (CBU) were screened for microbial contamination under routine conditions. The antibiotic resistance profile for all isolates was also examined using ATB strips. The detection rate for culture positive units was 7.5%, corresponding to 422 samples.16S rRNA sequence analysis and identification with API test system were used to identify the culturable aerobic, microaerophilic and anaerobic bacteria from CBUs. From these samples we recovered 485 isolates (84 operational taxonomic units, OTUs) assigned to the classes Bacteroidia, Actinobacteria, Clostridia, Bacilli, Betaproteobacteria and primarily to the Gammaproteobacteria. Sixty-nine OTUs, corresponding to 447 isolates, showed 16S rRNA sequence similarities above 99.0% with known cultured bacteria. However, 14 OTUs had 16S rRNA sequence similarities between 95 and 99% in support of genus level identification and one OTU with 16S rRNA sequence similarity of 90.3% supporting a family level identification only. The phenotypic identification formed 29 OTUs that could be identified to the species level and 9 OTUs that could be identified to the genus level by API test system. We failed to obtain identification for 14 OTUs, while 32 OTUs comprised organisms producing mixed identifications. Forty-two OTUs covered species not included in the API system databases. The API test system Rapid ID 32 Strep and Rapid ID 32 E showed the highest proportion of identifications to the species level, the lowest ratio of unidentified results and the highest agreement to the results of 16S rRNA assignments. Isolates affiliated to the Bacilli and Bacteroidia showed the highest antibiotic multi-resistance indices and microorganisms of the Clostridia displayed the most antibiotic sensitive phenotypes. PMID:26512991
França, Luís; Simões, Catarina; Taborda, Marco; Diogo, Catarina; da Costa, Milton S
2015-01-01
Over a period of ten months a total of 5618 cord blood units (CBU) were screened for microbial contamination under routine conditions. The antibiotic resistance profile for all isolates was also examined using ATB strips. The detection rate for culture positive units was 7.5%, corresponding to 422 samples.16S rRNA sequence analysis and identification with API test system were used to identify the culturable aerobic, microaerophilic and anaerobic bacteria from CBUs. From these samples we recovered 485 isolates (84 operational taxonomic units, OTUs) assigned to the classes Bacteroidia, Actinobacteria, Clostridia, Bacilli, Betaproteobacteria and primarily to the Gammaproteobacteria. Sixty-nine OTUs, corresponding to 447 isolates, showed 16S rRNA sequence similarities above 99.0% with known cultured bacteria. However, 14 OTUs had 16S rRNA sequence similarities between 95 and 99% in support of genus level identification and one OTU with 16S rRNA sequence similarity of 90.3% supporting a family level identification only. The phenotypic identification formed 29 OTUs that could be identified to the species level and 9 OTUs that could be identified to the genus level by API test system. We failed to obtain identification for 14 OTUs, while 32 OTUs comprised organisms producing mixed identifications. Forty-two OTUs covered species not included in the API system databases. The API test system Rapid ID 32 Strep and Rapid ID 32 E showed the highest proportion of identifications to the species level, the lowest ratio of unidentified results and the highest agreement to the results of 16S rRNA assignments. Isolates affiliated to the Bacilli and Bacteroidia showed the highest antibiotic multi-resistance indices and microorganisms of the Clostridia displayed the most antibiotic sensitive phenotypes.
From WSN towards WoT: Open API Scheme Based on oneM2M Platforms
Kim, Jaeho; Choi, Sung-Chan; Ahn, Il-Yeup; Sung, Nak-Myoung; Yun, Jaeseok
2016-01-01
Conventional computing systems have been able to be integrated into daily objects and connected to each other due to advances in computing and network technologies, such as wireless sensor networks (WSNs), forming a global network infrastructure, called the Internet of Things (IoT). To support the interconnection and interoperability between heterogeneous IoT systems, the availability of standardized, open application programming interfaces (APIs) is one of the key features of common software platforms for IoT devices, gateways, and servers. In this paper, we present a standardized way of extending previously-existing WSNs towards IoT systems, building the world of the Web of Things (WoT). Based on the oneM2M software platforms developed in the previous project, we introduce a well-designed open API scheme and device-specific thing adaptation software (TAS) enabling WSN elements, such as a wireless sensor node, to be accessed in a standardized way on a global scale. Three pilot services are implemented (i.e., a WiFi-enabled smart flowerpot, voice-based control for ZigBee-connected home appliances, and WiFi-connected AR.Drone control) to demonstrate the practical usability of the open API scheme and TAS modules. Full details on the method of integrating WSN elements into three example systems are described at the programming code level, which is expected to help future researchers in integrating their WSN systems in IoT platforms, such as oneM2M. We hope that the flexibly-deployable, easily-reusable common open API scheme and TAS-based integration method working with the oneM2M platforms will help the conventional WSNs in diverse industries evolve into the emerging WoT solutions. PMID:27782058
Alqarni, Abdulaziz S.; Hannan, Mohammed A.; Owayss, Ayman A.; Engel, Michael S.
2011-01-01
Abstract Apis mellifera jemenitica Ruttner (= yemenitica auctorum: vide Engel 1999) has been used in apiculture throughout the Arabian Peninsula since at least 2000 BC. Existing literature demonstrates that these populations are well adapted for the harsh extremes of the region. Populations of Apis mellifera jemenitica native to Saudi Arabia are far more heat tolerant than the standard races often imported from Europe. Central Saudi Arabia has the highest summer temperatures for the Arabian Peninsula, and it is in this region where only Apis mellifera jemenitica survives, while other subspecies fail to persist. The indigenous race of Saudi Arabia differs from other subspecies in the region in some morphological, biological, and behavioral characteristics. Further taxonomic investigation, as well as molecular studies, is needed in order to confirm whether the Saudi indigenous bee populations represent a race distinct from Apis mellifera jemenitica, or merely an ecotype of this subspecies. PMID:22140343
Asadi, N; Rahimi, A; Ghaheri, M; Kahrizi, D; Bagheri Dehbaghi, M; Khederzadeh, S; Banabazi, M H; Esmaeilkhanian, S; Veisi, B; Geravandi, M; Karim, H; Vaziri, S; Daneshgar, F; Zargooshi, J
2016-10-31
Apis florea is one of two species of small, wild honeybee. The present study was conducted to evaluate the genetic diversity of Apis florea honeybee from 48 nests (colonies) using microsatellite markers in the South of Iran. All honeybee samples were analyzed for six microsatellite loci (A88, A107, A7, B124, A113 and A35). The six loci had different numbers of alleles in the sampled colonies ranging from 7 (loci A107) to 3 (loci A7, A35). Gene diversity in Apis florea ranged from 0.491 to 0.595. This range probably reflects the spreading of nests in a large region with a varied climate. Phylogenetic tree showed two distinct clusters including a) Minab region samples and b) Bandar Abbas, Bandar Khamir and Qeshm Island regions. All of these regions are geographically rich, having varied vegetation and climate conditions. Our findings are an important contribution to the methods of studying distribution and conservation of Apis florea.
HDF-EOS 2 and HDF-EOS 5 Compatibility Library
NASA Technical Reports Server (NTRS)
Ullman, Richard; Bane, Bob; Yang, Jingli
2008-01-01
The HDF-EOS 2 and HDF-EOS 5 Compatibility Library contains C-language functions that provide uniform access to HDF-EOS 2 and HDF-EOS 5 files through one set of application programming interface (API) calls. ("HDFEOS 2" and "HDF-EOS 5" are defined in the immediately preceding article.) Without this library, differences between the APIs of HDF-EOS 2 and HDF-EOS 5 would necessitate writing of different programs to cover HDF-EOS 2 and HDF-EOS 5. The API associated with this library is denoted "he25." For nearly every HDF-EOS 5 API call, there is a corresponding he25 API call. If a file in question is in the HDF-EOS 5 format, the code reverts to the corresponding HDF-EOS 5 call; if the file is in the HDF-EOS 2 format, the code translates the arguments to HDF-EOS 2 equivalents (if necessary), calls the HDFEOS 2 call, and retranslates the results back to HDF-EOS 5 (if necessary).
Effect of pH on the functional properties of Arthrospira (Spirulina) platensis protein isolate.
Benelhadj, Sonda; Gharsallaoui, Adem; Degraeve, Pascal; Attia, Hamadi; Ghorbel, Dorra
2016-03-01
In the present study, a protein isolate extracted from Arthrospira platensis by isoelectric precipitation was evaluated for its functional properties. The maximum nitrogen solubility was 59.6±0.7% (w/w) at pH 10. The A. platensis protein isolate (API) showed relatively high oil (252.7±0.3g oil/100g API) and water (428.8±15.4g of water/100g of API at pH 10) absorption capacities. The protein zeta potential, the emulsifying capacity, the emulsion ageing stability, the emulsion microstructure and the emulsion opacity as well as the foaming capacity and the foam stability were shown to be greatly affected by pH. Especially, emulsifying and foaming capacities were positively correlated to the protein solubility. Moreover, the API was able to form films when sorbitol (30% (w/w)) was used as plasticizer and to form gels when the API concentration exceeded 12% (w/w). Copyright © 2015 Elsevier Ltd. All rights reserved.
Measuring the impact of an API-first mentality with ScienceBase after 4.5 years
NASA Astrophysics Data System (ADS)
Bristol, S.; Tekell, S.
2016-12-01
ScienceBase is a research infrastructure developed and operated by the U.S. Geological Survey with users and uses across a number of other agency and organization partners. Over four years ago, we released an Application Programming Interface (API) as the foundation of the system and took on the mindset that our progress would be measured by the uptake of the API by others beyond ourselves in developing interesting applications. We now measure success more by someone finding ScienceBase, organizing their data and information, developing an innovative API-driven application and then serendipitous discovery through a science meeting. Because of the way we built the RESTful API, we can characterize what parts of the system are employed. Analysis of usage data helps us take the supposition out of what works and guides design and funding decisions. This analytics-based process facilitates regular adjustments to our thinking and allows us to test design decisions as hypotheses rather than untestable aspirations.
Characterization of nanoscale spatial distribution of small molecules in amorphous polymer matrices
NASA Astrophysics Data System (ADS)
Ricarte, Ralm; Hillmyer, Marc; Lodge, Timothy
Hydroxypropyl methylcellulose acetate succinate (HPMCAS) can significantly enhance the efficacy of active pharmaceutical ingredients (APIs). Yet, the interactions between species in HPMCAS-API blends are not understood. Elucidating these interactions is difficult because the spatial distributions of HPMCAS and API in the blends are ambiguous; the polymer and drug may be molecularly mixed or the species may form phase separated domains. As these phase separated domains may be less than 100 nm in size, traditional characterization techniques may not accurately evaluate the spatial distribution. To address this challenge, we explore the use of electron energy-loss spectroscopy (EELS) for detecting the model API phenytoin in an HPMCAS-phenytoin blend. Using EELS, we directly measured with high accuracy and precision the phenytoin concentrations in several blends. We present evidence that suggests phase separation occurs in blends that have a phenytoin loading of approximately 50 wt percent. Finally, we demonstrate that this technique achieves a sub-100 nm spatial resolution and can detect several other APIs.
Han, Chong-suk
2008-10-01
Although reported cases of HIV/AIDS among gay Asian Pacific Islander (API) American men and API men who have sex with men (MSM) are still relatively low, current research findings indicate that incidences of unsafe sexual activity may be higher for this group than for any other group. Among the explanations offered to explain the levels of increasing unsafe sex among gay API men have been sexual norms found in Asian cultures, the lack of culturally relevant and/or linguistically appropriate intervention material, lack of integration into the mainstream gay community, and internalized homophobia. What are often ignored in these analyses are the contextual norms in which sexual behavior for gay API men occur. In this article, I develop the argument that racism within the gay community leads to socially and contextually prescribed sexual roles for gay API men that may also contribute to the practice of unsafe sex among this group.
JASPAR RESTful API: accessing JASPAR data from any programming language.
Khan, Aziz; Mathelier, Anthony
2018-05-01
JASPAR is a widely used open-access database of curated, non-redundant transcription factor binding profiles. Currently, data from JASPAR can be retrieved as flat files or by using programming language-specific interfaces. Here, we present a programming language-independent application programming interface (API) to access JASPAR data using the Representational State Transfer (REST) architecture. The REST API enables programmatic access to JASPAR by most programming languages and returns data in eight widely used formats. Several endpoints are available to access the data and an endpoint is available to infer the TF binding profile(s) likely bound by a given DNA binding domain protein sequence. Additionally, it provides an interactive browsable interface for bioinformatics tool developers. This REST API is implemented in Python using the Django REST Framework. It is accessible at http://jaspar.genereg.net/api/ and the source code is freely available at https://bitbucket.org/CBGR/jaspar under GPL v3 license. aziz.khan@ncmm.uio.no or anthony.mathelier@ncmm.uio.no. Supplementary data are available at Bioinformatics online.
Finding, Weighting and Describing Venues: CSIRO at the 2012 TREC Contextual Suggestion Track
2012-11-01
commercial system (namely the Google Places API ), and whether the current experimental setup encourages diversity. The remaining two submissions...baseline systems that rely on the Google Places API and the user reviews it provides, and two more complex systems that incorporate information...from the Foursquare API , and are sensitive to personal preference and time. The remainder of this paper is structured as follows. The next section
Commercial Building Energy Saver, API
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hong, Tianzhen; Piette, Mary; Lee, Sang Hoon
2015-08-27
The CBES API provides Application Programming Interface to a suite of functions to improve energy efficiency of buildings, including building energy benchmarking, preliminary retrofit analysis using a pre-simulation database DEEP, and detailed retrofit analysis using energy modeling with the EnergyPlus simulation engine. The CBES API is used to power the LBNL CBES Web App. It can be adopted by third party developers and vendors into their software tools and platforms.
Ptaszyńska, Aneta A; Borsuk, Grzegorz; Woźniakowski, Grzegorz; Gnat, Sebastian; Małek, Wanda
2014-08-01
Nosemosis is a contagious disease of honeybees (Apis mellifera) manifested by increased winter mortality, poor spring build-up and even the total extinction of infected bee colonies. In this paper, loop-mediated isothermal amplifications (LAMP) were used for the first time to identify and differentiate N. apis and N. ceranae, the causative agents of nosemosis. LAMP assays were performed at a constant temperature of 60 °C using two sets of six species-specific primers, recognising eight distinct fragments of 16S rDNA gene and GspSSD polymerase with strand displacement activity. The optimal time for LAMP and its Nosema species sensitivity and specificity were assessed. LAMP only required 30 min for robust identification of the amplicons. Ten-fold serial dilutions of total DNA isolated from bees infected with microsporidia were used to determine the detection limit of N. apis and N. ceranae DNAs by LAMP and standard PCR assays. LAMP appeared to be 10(3) -fold more sensitive than a standard PCR in detecting N. apis and N. ceranae. LAMP methods developed by us are highly Nosema species specific and allow to identify and differentiate N. apis and N. ceranae. © 2014 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.
Tahara, Kohei; Nishikawa, Masahiro; Matsui, Ko; Hisazumi, Koji; Onodera, Risako; Tozuka, Yuichi; Takeuchi, Hirofumi
2016-09-01
The aim of this study was to enhance the dissolution and oral absorption of poorly water-soluble active pharmaceutical ingredients (APIs) using nanoparticle suspensions prepared with a PureNano™ continuous crystallizer (PCC). Nanoparticle suspensions were prepared with a PCC, which is based on microfluidics reaction technology and solvent-antisolvent crystallization. Phenytoin, bezafibrate, flurbiprofen, and miconazole were used as model APIs. These APIs were dissolved in ethanol and precipitated by the addition of water and polyvinyl alcohol. Batch crystallization (BC) using a beaker was also performed to prepare the suspensions. Both PCC and BC formulations were freeze-dried before being characterized in vitro and in vivo. The particle sizes of the nanoparticle suspensions prepared with the PCC were smaller than those prepared by BC. The dissolution rate of each API in vitro significantly increased after crystallization. Reducing the particle size of either the BC or PCC formulation led to increased API flux across Caco-2 cell monolayers. PCC preparations showed higher plasma concentrations after oral administration, demonstrating the advantages of a fast dissolution rate and increased interaction with the gastrointestinal tract owing to the smaller particle size. PCC can continuously produce nanoparticle APIs and is an efficient approach for improving their oral bioavailability.
Factor structure of the autonomy preference index in people with severe mental illness.
Bonfils, Kelsey A; Adams, Erin L; Mueser, Kim T; Wright-Berryman, Jennifer L; Salyers, Michelle P
2015-08-30
People vary in the amount of control they want to exercise over decisions about their healthcare. Given the importance of patient-centered care, accurate measurement of these autonomy preferences is critical. This study aimed to assess the factor structure of the Autonomy Preference Index (API), used widely in general healthcare, in individuals with severe mental illness. Data came from two studies of people with severe mental illness (N=293) who were receiving mental health and/or primary care/integrated care services. Autonomy preferences were assessed with the API regarding both psychiatric and primary care services. Confirmatory factor analysis was used to evaluate fit of the hypothesized two-factor structure of the API (decision-making autonomy and information-seeking autonomy). Results indicated the hypothesized structure for the API did not adequately fit the data for either psychiatric or primary care services. Three problematic items were dropped, resulting in adequate fit for both types of treatment. These results suggest that with relatively minor modifications the API has an acceptable factor structure when asking people with severe mental illness about their preferences to be involved in decision-making. The modified API has clinical and research utility for this population in the burgeoning field of autonomy in patient-centered healthcare. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Xiong, Wenhao; Tian, Xin; Chen, Genshe; Pham, Khanh; Blasch, Erik
2017-05-01
Software defined radio (SDR) has become a popular tool for the implementation and testing for communications performance. The advantage of the SDR approach includes: a re-configurable design, adaptive response to changing conditions, efficient development, and highly versatile implementation. In order to understand the benefits of SDR, the space telecommunication radio system (STRS) was proposed by NASA Glenn research center (GRC) along with the standard application program interface (API) structure. Each component of the system uses a well-defined API to communicate with other components. The benefit of standard API is to relax the platform limitation of each component for addition options. For example, the waveform generating process can support a field programmable gate array (FPGA), personal computer (PC), or an embedded system. As long as the API defines the requirements, the generated waveform selection will work with the complete system. In this paper, we demonstrate the design and development of adaptive SDR following the STRS and standard API protocol. We introduce step by step the SDR testbed system including the controlling graphic user interface (GUI), database, GNU radio hardware control, and universal software radio peripheral (USRP) tranceiving front end. In addition, a performance evaluation in shown on the effectiveness of the SDR approach for space telecommunication.
Peng, Yan; Grassl, Julia; Millar, A Harvey; Baer, Boris
2016-01-27
The societies of ants, bees and wasps are genetically closed systems where queens only mate during a brief mating episode prior to their eusocial life and males therefore provide queens with a lifetime supply of high-quality sperm. These ejaculates also contain a number of defence proteins that have been detected in the seminal fluid but their function and efficiency have never been investigated in great detail. Here, we used the honeybee Apis mellifera and quantified whether seminal fluid is able to combat infections of the fungal pathogen Nosema apis, a widespread honeybee parasite that is also sexually transmitted. We provide the first empirical evidence that seminal fluid has a remarkable antimicrobial activity against N. apis spores and that antimicrobial seminal fluid components kill spores in multiple ways. The protein fraction of seminal fluid induces extracellular spore germination, which disrupts the life cycle of N. apis, whereas the non-protein fraction of seminal fluid induces a direct viability loss of intact spores. We conclude that males provide their ejaculates with efficient antimicrobial molecules that are able to kill N. apis spores and thereby reduce the risk of disease transmission during mating. Our findings could be of broader significance to master honeybee diseases in managed honeybee stock in the future. © 2016 The Author(s).
JEnsembl: a version-aware Java API to Ensembl data systems
Paterson, Trevor; Law, Andy
2012-01-01
Motivation: The Ensembl Project provides release-specific Perl APIs for efficient high-level programmatic access to data stored in various Ensembl database schema. Although Perl scripts are perfectly suited for processing large volumes of text-based data, Perl is not ideal for developing large-scale software applications nor embedding in graphical interfaces. The provision of a novel Java API would facilitate type-safe, modular, object-orientated development of new Bioinformatics tools with which to access, analyse and visualize Ensembl data. Results: The JEnsembl API implementation provides basic data retrieval and manipulation functionality from the Core, Compara and Variation databases for all species in Ensembl and EnsemblGenomes and is a platform for the development of a richer API to Ensembl datasources. The JEnsembl architecture uses a text-based configuration module to provide evolving, versioned mappings from database schema to code objects. A single installation of the JEnsembl API can therefore simultaneously and transparently connect to current and previous database instances (such as those in the public archive) thus facilitating better analysis repeatability and allowing ‘through time’ comparative analyses to be performed. Availability: Project development, released code libraries, Maven repository and documentation are hosted at SourceForge (http://jensembl.sourceforge.net). Contact: jensembl-develop@lists.sf.net, andy.law@roslin.ed.ac.uk, trevor.paterson@roslin.ed.ac.uk PMID:22945789
A Driving Cycle Detection Approach Using Map Service API
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhu, Lei; Gonder, Jeffrey D
Following advancements in smartphone and portable global positioning system (GPS) data collection, wearable GPS data have realized extensive use in transportation surveys and studies. The task of detecting driving cycles (driving or car-mode trajectory segments) from wearable GPS data has been the subject of much research. Specifically, distinguishing driving cycles from other motorized trips (such as taking a bus) is the main research problem in this paper. Many mode detection methods only focus on raw GPS speed data while some studies apply additional information, such as geographic information system (GIS) data, to obtain better detection performance. Procuring and maintaining dedicatedmore » road GIS data are costly and not trivial, whereas the technical maturity and broad use of map service application program interface (API) queries offers opportunities for mode detection tasks. The proposed driving cycle detection method takes advantage of map service APIs to obtain high-quality car-mode API route information and uses a trajectory segmentation algorithm to find the best-matched API route. The car-mode API route data combined with the actual route information, including the actual mode information, are used to train a logistic regression machine learning model, which estimates car modes and non-car modes with probability rates. The experimental results show promise for the proposed method's ability to detect vehicle mode accurately.« less
Does Nosema ceranae Wipe Out Nosema apis in Turkey?
Ivgin Tunca, Rahşan; Oskay, Devrim; Gosterit, Ayhan; Tekin, Olgay Kaan
2016-01-01
The aim of this study was to determine the prevalence of the Nosema ceranae and Nosema apis among apiaries using both spore counts and multiplex PCR and the replacement of N. apis by N. ceranae in some regions of Turkey. A hundred honey bee samples were collected from 99 apiaries in 11 different locations in 2011-2012 in Turkey. Nosema infection degree from collected samples was determined using light microscope and molecular detection of Nosema spp. ( N. ceranae and N. apis ) was performed using specific primers by multiplex PCR. N. ceranae was only found spores in sampling areas using molecular diagnosis. N. apis was not detected in whole sampling areas using both techniques. There are no Nosema spores detected in Konya one location using two techniques. The nucleotide sequences from amplification products of the Nosema infested honeybee samples were (98%) identical with the sequence of N. ceranae for many countries deposited in the GenBank database in this study. The present study illustrated that N. ceranae is the only spores for sampled areas in 2011-2012. The study could also indicate that N. ceranae has been replaced instead of N . apis in Turkey. In addition, the prevalence of N. ceranae and two microsporodia spores effects on honey bee colonies in Turkey were needed to determine with intensive sampling, periodically.
Steele, C Brooke; Townsend, Julie S; Tai, Eric; Thomas, Cheryll C
2014-03-01
Published literature on receipt of preventive healthcare services among Asian American and Pacific Islander (API) cancer survivors is scarce. We describe patterns in receipt of preventive services among API long-term colorectal cancer (CRC) survivors. Surveillance, Epidemiology, and End Results registry-Medicare data were used to identify 9,737 API and white patients who were diagnosed with CRC during 1996-2000 and who survived 5 or more years beyond their diagnoses. We examined receipt of vaccines, mammography (females), bone densitometry (females), and cholesterol screening among the survivors and how the physician specialties they visited for follow-up care correlated to services received. APIs were less likely than whites to receive mammography (52.0 vs. 69.3 %, respectively; P < 0.0001) but more likely to receive influenza vaccine, cholesterol screening, and bone densitometry. These findings remained significant in our multivariable model, except for receipt of bone densitometry. APIs visited PCPs only and both PCPs and oncologists more frequently than whites (P < 0.0001). Women who visited both PCPs and oncologists compared with PCPs only were more likely to receive mammography (odds ratio = 1.40; 95 % confidence interval, 1.05-1.86). Visits to both PCPs and oncologists were associated with increased use of mammography. Although API survivors visited these specialties more frequently than white survivors, API women may need culturally appropriate outreach to increase their use of this test. Long-term cancer survivors need to be aware of recommended preventive healthcare services, as well as who will manage their primary care and cancer surveillance follow-up.
Stauffer, F; Vanhoorne, V; Pilcer, G; Chavez, P-F; Rome, S; Schubert, M A; Aerts, L; De Beer, T
2018-06-01
Active Pharmaceutical Ingredients (API) raw material variability is not always thoroughly considered during pharmaceutical process development, mainly due to low quantities of drug substance available. However, synthesis, crystallization routes and production sites evolve during product development and product life cycle leading to changes in physical material attributes which can potentially affect their processability. Recent literature highlights the need for a global approach to understand the link between material synthesis, material variability, process and product quality. The study described in this article aims at explaining the raw material variability of an API using extensive material characterization on a restricted number of representative batches using multivariate data analysis. It is part of a larger investigation trying to link the API drug substance manufacturing process, the resulting physical API raw material attributes and the drug product continuous manufacturing process. Eight API batches produced using different synthetic routes, crystallization, drying, delumping processes and processing equipment were characterized, extensively. Seventeen properties from seven characterization techniques were retained for further analysis using Principal Component Analysis (PCA). Three principal components (PCs) were sufficient to explain 92.9% of the API raw material variability. The first PC was related to crystal length, agglomerate size and fraction, flowability and electrostatic charging. The second PC was driven by the span of the particle size distribution and the agglomerates strength. The third PC was related to surface energy. Additionally, the PCA allowed to summarize the API batch-to-batch variability in only three PCs which can be used in future drug product development studies to quantitatively evaluate the impact of the API raw material variability upon the drug product process. The approach described in this article could be applied to any other compound which is prone to batch-to-batch variability. Copyright © 2018 Elsevier B.V. All rights reserved.
Information Security Considerations for Applications Using Apache Accumulo
2014-09-01
Distributed File System INSCOM United States Army Intelligence and Security Command JPA Java Persistence API JSON JavaScript Object Notation MAC Mandatory... MySQL [13]. BigTable can process 20 petabytes per day [14]. High degree of scalability on commodity hardware. NoSQL databases do not rely on highly...manipulation in relational databases. NoSQL databases each have a unique programming interface that uses a lower level procedural language (e.g., Java
Herrmann, Manuel; Olsson, Oliver; Fiehn, Rainer; Herrel, Markus; Kümmerer, Klaus
2015-12-01
Active pharmaceutical ingredients (APIs) have been frequently found in the environment. It is, however, still not quite clear who is mainly responsible for API emissions. Hospitals have been considered to be the main contributing point sources for wastewater (WW) discharge of APIs. However, recent studies have shown that the contribution of hospitals to the input of APIs into the aquatic environment is quite low. Due to demographic change and the increase of psychiatric diseases, health institutions (HIs) such as psychiatric hospitals and nursing homes are likely to be important sources as well, but no data is available in this respect. This study aims to assess the impact of HIs and to provide a methodology to measure their respective contributions. Drawing on pharmaceutical consumption data for the years 2010, 2011, and 2012, this study identified API usage patterns for a psychiatric hospital (146 beds), a nursing home (286 inhabitants), and a general hospital (741 beds), the latter of which comprises three separate locations. All the HIs are located in two sub-regions of a county district with about 400,000 citizens in southwestern Germany. A selection of neurological drugs was quantified in the sewer of these facilities to evaluate the correlation between consumption and emission. The API contribution of HIs was assessed by comparing the specific consumption in the facilities with the consumption in households, expressed as the emission potential (IEP). The study shows that the usage patterns of APIs in the psychiatric hospital and the nursing home were different from the general hospital. Neurological drugs such as anticonvulsants, psycholeptics, and psychoanaleptics were mainly consumed in the psychiatric hospital and the nursing home (74% and 65%, respectively). Predicted and average measured concentrations in the effluent of the investigated HIs differed mostly by less than one order of magnitude. Therefore, the consumption-based approach is a useful method to assess usage patterns of APIs in HIs and to predict their respective contributions to WW. The national contribution of HIs on total WW discharge of APIs compared to households was very low. Only the results for the sedative clomethiazole in general hospitals as well as the antidepressant moclobemide and the antipsychotic quetiapine for the nursing homes were found to deserve some attention. The regional comparison showed that in sub-regions with a comparably higher density of HIs, the allocated facilities could be seen as point sources emitting particular APIs. However, in general, the bulk of the consumed pharmaceuticals to WW discharge has to be attributed to households. Copyright © 2015 Elsevier Ltd. All rights reserved.
The Ensembl REST API: Ensembl Data for Any Language.
Yates, Andrew; Beal, Kathryn; Keenan, Stephen; McLaren, William; Pignatelli, Miguel; Ritchie, Graham R S; Ruffier, Magali; Taylor, Kieron; Vullo, Alessandro; Flicek, Paul
2015-01-01
We present a Web service to access Ensembl data using Representational State Transfer (REST). The Ensembl REST server enables the easy retrieval of a wide range of Ensembl data by most programming languages, using standard formats such as JSON and FASTA while minimizing client work. We also introduce bindings to the popular Ensembl Variant Effect Predictor tool permitting large-scale programmatic variant analysis independent of any specific programming language. The Ensembl REST API can be accessed at http://rest.ensembl.org and source code is freely available under an Apache 2.0 license from http://github.com/Ensembl/ensembl-rest. © The Author 2014. Published by Oxford University Press.
NASA Astrophysics Data System (ADS)
Omar, Ahmad Fairuz; Mardziah Yahaya, Ommi Kalsom; Tan, Kok Chooi; Mail, Mohd Hafiz; Seeni, Azman
2016-04-01
The major issues concerning to food products are related to its authenticity. Honey is one of the common food products that suffer from adulteration, mainly due to its constant high market demand and price. Several studies on the authenticity detection have been done mainly on honey from genus Apis (GA), but less research has been conducted on Stingless Bee Honey (SBH) even the market demand for this food product is increasing, particularly in Malaysia due to its possible health benefits. Thus, identification of unadulterated and authenticity of honey is a very key issue for products processors, retailers, consumers and regulatory authorities. There is an increasing demand for appropriate instruments and methods to shield consumers against fraud and to guarantee a fair competition between honey producers. The study presented in this paper shows the effect of diluting pure honey from both genus Apis and Stingless Bee towards its physicochemical attributes (i.e. soluble solids content and pH) and VIS-NIR spectral absorbance features.
Investigating an API for resilient exascale computing.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stearley, Jon R.; Tomkins, James; VanDyke, John P.
2013-05-01
Increased HPC capability comes with increased complexity, part counts, and fault occurrences. In- creasing the resilience of systems and applications to faults is a critical requirement facing the viability of exascale systems, as the overhead of traditional checkpoint/restart is projected to outweigh its bene ts due to fault rates outpacing I/O bandwidths. As faults occur and propagate throughout hardware and software layers, pervasive noti cation and handling mechanisms are necessary. This report describes an initial investigation of fault types and programming interfaces to mitigate them. Proof-of-concept APIs are presented for the frequent and important cases of memory errors and nodemore » failures, and a strategy proposed for lesystem failures. These involve changes to the operating system, runtime, I/O library, and application layers. While a single API for fault handling among hardware and OS and application system-wide remains elusive, the e ort increased our understanding of both the mountainous challenges and the promising trailheads. 3« less
Dynamic Policy-Driven Quality of Service in Service-Oriented Information Management Systems
2011-01-01
both DiffServ and IntServ net- work QoS mechanisms. Wang et al [48] provide middleware APIs to shield applications from directly interacting with...complex network QoS mechanism APIs . Middleware frameworks transparently converted the specified application QoS requirements into low- er-level network...QoS mechanism APIs and provided network QoS assurances. Deployment-time resource allocation. Other prior work has focused on deploying ap- plications
Open SHMEM Reference Implementation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pritchard, Howard; Curtis, Anthony; Welch, Aaron
2016-05-12
OpenSHMEM is an effort to create a specification for a standardized API for parallel programming in the Partitioned Global Address Space. Along with the specification the project is also creating a reference implementation of the API. This implementation attempts to be portable, to allow it to be deployed in multiple environments, and to be a starting point for implementations targeted to particular hardware platforms. It will also serve as a springboard for future development of the API.
Xu, Xiaoming; Al-Ghabeish, Manar; Rahman, Ziyaur; Krishnaiah, Yellela S R; Yerlikaya, Firat; Yang, Yang; Manda, Prashanth; Hunt, Robert L; Khan, Mansoor A
2015-09-30
Owing to its unique anatomical and physiological functions, ocular surface presents special challenges for both design and performance evaluation of the ophthalmic ointment drug products formulated with a variety of bases. The current investigation was carried out to understand and identify the appropriate in vitro methods suitable for quality and performance evaluation of ophthalmic ointment, and to study the effect of formulation and process variables on its critical quality attributes (CQA). The evaluated critical formulation variables include API initial size, drug percentage, and mineral oil percentage while the critical process parameters include mixing rate, temperature, time and cooling rate. The investigated quality and performance attributes include drug assay, content uniformity, API particle size in ointment, rheological characteristics, in vitro drug release and in vitro transcorneal drug permeation. Using design of experiments (DoE) as well as a novel principle component analysis approach, five of the quality and performance attributes (API particle size, storage modulus of ointment, high shear viscosity of ointment, in vitro drug release constant and in vitro transcorneal drug permeation rate constant) were found to be highly influenced by the formulation, in particular the strength of API, and to a lesser degree by processing variables. Correlating the ocular physiology with the physicochemical characteristics of acyclovir ophthalmic ointment suggested that in vitro quality metrics could be a valuable predictor of its in vivo performance. Published by Elsevier B.V.
Sóti, Péter Lajos; Bocz, Katalin; Pataki, Hajnalka; Eke, Zsuzsanna; Farkas, Attila; Verreck, Geert; Kiss, Éva; Fekete, Pál; Vigh, Tamás; Wagner, István; Nagy, Zsombor K; Marosi, György
2015-10-15
Three solvent based methods: spray drying (SD), electrospinning (ES) and air-assisted electrospinning (electroblowing; EB) were used to prepare solid dispersions of itraconazole and Eudragit E. Samples with the same API/polymer ratios were prepared in order to make the three technologies comparable. The structure and morphology of solid dispersions were identified by scanning electron microscopy and solid phase analytical methods such as, X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC) and Raman chemical mapping. Moreover, the residual organic solvents of the solid products were determined by static headspace-gas chromatography/mass spectroscopy measurements and the wettability of samples was characterized by contact angle measurement. The pharmaceutical performance of the three dispersion type, evaluated by dissolution tests, proved to be very similar. According to XRPD and DSC analyses, made after the production, all the solid dispersions were free of any API crystal clusters but about 10 wt% drug crystallinity was observed after three months of storage in the case of the SD samples in contrast to the samples produced by ES and EB in which the polymer matrix preserved the API in amorphous state. Copyright © 2015 Elsevier B.V. All rights reserved.
Abia, Akebe Luther King; Ubomba-Jaswa, Eunice; Momba, Maggy Ndombo Benteke
2015-12-15
Many South Africans living in resource-poor settings with little or no access to pipe-borne water still rely on rivers as alternative water sources for drinking and other purposes. The poor microbial quality of such water bodies calls for appropriate monitoring. However, routine monitoring only takes into consideration the microbial quality of the water column, and does not include monitoring of the riverbed sediments for microbial pollution. This study sought to investigate the microbial quality of riverbed sediments in the Apies River, Gauteng Province, South Africa, using Escherichia coli as a faecal indicator organism and to investigate the impact of seasonal variation on its abundance. Weekly samples were collected at 10 sampling sites on the Apies River between May and August 2013 (dry season) and between January and February 2014 (wet season). E. coli was enumerated using the Colilert®-18 Quanti-Tray® 2000 system. All sites tested positive for E. coli. Wastewater treatment work effluents had the highest negative impact on the river water quality. Seasonal variations had an impact on the concentration of E. coli both in water and sediments with concentrations increasing during the wet season. A strong positive correlation was observed between temperature and the E. coli concentrations. We therefore conclude that the sediments of the Apies River are heavily polluted with faecal indicator bacteria and could also harbour other microorganisms including pathogens. The release of such pathogens into the water column as a result of the resuspension of sediments due to extreme events like floods or human activities could increase the health risk of the populations using the untreated river water for recreation and other household purposes. There is therefore an urgent need to reconsider and review the current South African guidelines for water quality monitoring to include sediments, so as to protect human health and other aquatic lives. Copyright © 2015 Elsevier B.V. All rights reserved.
30 CFR 250.1201 - Definitions.
Code of Federal Regulations, 2013 CFR
2013-07-01
... production from a royalty or allocation measurement point. API MPMS—the American Petroleum Institute's Manual of Petroleum Measurement Standards, chapters 1, 20, and 21. British Thermal Unit (Btu)—the amount of...
30 CFR 250.1201 - Definitions.
Code of Federal Regulations, 2014 CFR
2014-07-01
... production from a royalty or allocation measurement point. API MPMS—the American Petroleum Institute's Manual of Petroleum Measurement Standards, chapters 1, 20, and 21. British Thermal Unit (Btu)—the amount of...
30 CFR 250.1201 - Definitions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... production from a royalty or allocation measurement point. API MPMS—the American Petroleum Institute's Manual of Petroleum Measurement Standards, chapters 1, 20, and 21. British Thermal Unit (Btu)—the amount of...
Figueirêdo, Camila Bezerra Melo; Nadvorny, Daniela; de Medeiros Vieira, Amanda Carla Quintas; Soares Sobrinho, José Lamartine; Rolim Neto, Pedro José; Lee, Ping I; de La Roca Soares, Monica Felts
2017-06-15
Benznidazole (BNZ), the only commercialized antichagasic drug, and the antifungal compound posaconazole (PCZ) have shown synergistic action in the therapy of Chagas disease, however both active pharmaceutical ingredients (APIs) exhibit low aqueous solubility potentially limiting their bioavailability and therapeutic efficacy. In this paper, we report for the first time the formation of a eutectic mixture as well as an amorphous solid solution of PCZ and BNZ (at the same characteristic ratio of 80:20wt%), which provided enhanced solubility and dissolution rate for both APIs. This eutectic system was characterized by DSC and the melting points obtained were used for the construction of a phase diagram. The preservation of the characteristic PXRD patterns and the IR spectra of the parent APIs, and the visualization of a characteristic eutectic lamellar crystalline microstructure using Confocal Raman Microscopy confirm this system as a true eutectic mixture. The PXRD result also confirms the amorphous nature of the prepared solid solution. Theoretical chemical analyses indicate the predominance of π-stacking interactions in the amorphous solid solution, whereas an electrostatic interaction between the APIs is responsible for maintaining the alternating lamellar crystalline microstructure in the eutectic mixture. Both the eutectic mixture and the amorphous solid solution happen to have a characteristic PCZ to BNZ ratio similar to that of their pharmacological doses for treating Chagas disease, thus providing a unique therapeutic combination dose with enhanced apparent solubility and dissolution rate. Copyright © 2017 Elsevier B.V. All rights reserved.
Effect of Temperature on the Corrosion Behavior of API X120 Pipeline Steel in H2S Environment
NASA Astrophysics Data System (ADS)
Okonkwo, Paul C.; Sliem, Mostafa H.; Shakoor, R. A.; Mohamed, A. M. A.; Abdullah, Aboubakr M.
2017-08-01
The corrosion behavior of newly developed API X120 C-steel that is commenced to be used for oil pipelines was studied in a H2S saturated 3.5 wt.% NaCl solution between 20 and 60 °C using potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The corrosion products formed on the surface of the alloy were characterized using x-ray diffraction and scanning electron microscopy. It has been noticed that the formation of corrosion product layer takes place at both lower and higher temperatures which is mainly comprised of iron oxides and sulfides. The electrochemical results confirmed that the corrosion rate decreases with increasing temperature up to 60 °C. This decrease in corrosion rate with increasing temperature can be attributed to the formation of a protective layer of mackinawite layer. However, cracking in the formed mackinawite layer may not be responsible for the increase in the corrosion rate. More specifically, developed pourbaix diagrams at different temperatures showed that the formed protective layer belongs to mackinawite (FeS), a group of classified polymorphous iron sulfide, which is in good agreement with the experimental results. It is also noticed that the thickness of corrosion products layer increases significantly with decrease in the corrosion rate of API X120 steel exposed to H2S environment. These findings indicate that API X120 C-steel is susceptible to sour corrosion under the above stated experimental conditions.
An overview of the CellML API and its implementation
2010-01-01
Background CellML is an XML based language for representing mathematical models, in a machine-independent form which is suitable for their exchange between different authors, and for archival in a model repository. Allowing for the exchange and archival of models in a computer readable form is a key strategic goal in bioinformatics, because of the associated improvements in scientific record accuracy, the faster iterative process of scientific development, and the ability to combine models into large integrative models. However, for CellML models to be useful, tools which can process them correctly are needed. Due to some of the more complex features present in CellML models, such as imports, developing code ab initio to correctly process models can be an onerous task. For this reason, there is a clear and pressing need for an application programming interface (API), and a good implementation of that API, upon which tools can base their support for CellML. Results We developed an API which allows the information in CellML models to be retrieved and/or modified. We also developed a series of optional extension APIs, for tasks such as simplifying the handling of connections between variables, dealing with physical units, validating models, and translating models into different procedural languages. We have also provided a Free/Open Source implementation of this application programming interface, optimised to achieve good performance. Conclusions Tools have been developed using the API which are mature enough for widespread use. The API has the potential to accelerate the development of additional tools capable of processing CellML, and ultimately lead to an increased level of sharing of mathematical model descriptions. PMID:20377909
Identification of (2-aminopropyl)indole positional isomers in forensic samples.
Scott, Kenneth R; Power, John D; McDermott, Seán D; O'Brien, John E; Talbot, Brian N; Barry, Michael G; Kavanagh, Pierce V
2014-01-01
In 2012, 5-(2-aminopropyl)indole (5-API, 5-IT) was reported by Norwegian authorities to the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA) via the Early Warning System (EWS). The 3- isomer, 3-(2-aminopropyl)indole (3-API, AMT, alpha-methyltryptamine), has been available on the recreational drugs market for a somewhat longer time, having first been reported to the EMCDDA by Finnish authorities in 2001. Both isomers are available from online vendors of 'legal highs'. Recently, three forensic drug cases (two tablets and one powder) were presented for routine analysis and the active constituent was tentatively identified as an API isomer. The six positional isomers (2-, 3-, 4-, 5-, 6- and 7-(2-aminopropyl)indoles) were synthesized and analyses by a combination gas chromatography-mass spectrometry (GC-MS), and liquid chromatography-mass spectrometry (LC-MS) showed that these could be readily discriminated thus facilitating the identification of 3-API in the tablets and 5-API in the powder. With exception of 5- and 6-APIs, which co-eluted, it was found possible to separate the isomers by GC without derivatization. LC separation also proved to be a feasible method for the discrimination of the isomers. Although the 2- and 7- isomers were not fully resolved by LC, it was found possible to distinguish them using their product ion spectra as the 2- isomer produced the m/z 132 fragment ion formed by loss of vinylamine, whereas the 7- isomer formed m/z 158 through loss of methylamine. In the synthesis 2-API, a novel tricyclic by-product was formed in an annulation reaction where the reaction solvent, tetrahydrofuran, was incorporated into the molecule. Copyright © 2013 John Wiley & Sons, Ltd.
Biewer, M; Lechner, S; Hasselmann, M
2016-01-01
Studying the fate of duplicated genes provides informative insight into the evolutionary plasticity of biological pathways to which they belong. In the paralogous sex-determining genes complementary sex determiner (csd) and feminizer (fem) of honey bee species (genus Apis), only heterozygous csd initiates female development. Here, the full-length coding sequences of the genes csd and fem of the phylogenetically basal dwarf honey bee Apis florea are characterized. Compared with other Apis species, remarkable evolutionary changes in the formation and localization of a protein-interacting (coiled-coil) motif and in the amino acids coding for the csd characteristic hypervariable region (HVR) are observed. Furthermore, functionally different csd alleles were isolated as genomic fragments from a random population sample. In the predicted potential specifying domain (PSD), a high ratio of πN/πS=1.6 indicated positive selection, whereas signs of balancing selection, commonly found in other Apis species, are missing. Low nucleotide diversity on synonymous and genome-wide, non-coding sites as well as site frequency analyses indicated a strong impact of genetic drift in A. florea, likely linked to its biology. Along the evolutionary trajectory of ~30 million years of csd evolution, episodic diversifying selection seems to have acted differently among distinct Apis branches. Consistently low amino-acid differences within the PSD among pairs of functional heterozygous csd alleles indicate that the HVR is the most important region for determining allele specificity. We propose that in the early history of the lineage-specific fem duplication giving rise to csd in Apis, A. florea csd stands as a remarkable example for the plasticity of initial sex-determining signals.
An overview of the CellML API and its implementation.
Miller, Andrew K; Marsh, Justin; Reeve, Adam; Garny, Alan; Britten, Randall; Halstead, Matt; Cooper, Jonathan; Nickerson, David P; Nielsen, Poul F
2010-04-08
CellML is an XML based language for representing mathematical models, in a machine-independent form which is suitable for their exchange between different authors, and for archival in a model repository. Allowing for the exchange and archival of models in a computer readable form is a key strategic goal in bioinformatics, because of the associated improvements in scientific record accuracy, the faster iterative process of scientific development, and the ability to combine models into large integrative models.However, for CellML models to be useful, tools which can process them correctly are needed. Due to some of the more complex features present in CellML models, such as imports, developing code ab initio to correctly process models can be an onerous task. For this reason, there is a clear and pressing need for an application programming interface (API), and a good implementation of that API, upon which tools can base their support for CellML. We developed an API which allows the information in CellML models to be retrieved and/or modified. We also developed a series of optional extension APIs, for tasks such as simplifying the handling of connections between variables, dealing with physical units, validating models, and translating models into different procedural languages.We have also provided a Free/Open Source implementation of this application programming interface, optimised to achieve good performance. Tools have been developed using the API which are mature enough for widespread use. The API has the potential to accelerate the development of additional tools capable of processing CellML, and ultimately lead to an increased level of sharing of mathematical model descriptions.
Maxfield-Taylor, Sarah A; Mujic, Alija B; Rao, Sujaya
2015-01-01
Fungi in the genus Ascosphaera (Ascomycota: Eurotiomycetes: Ascosphaerales) cause chalkbrood disease in larvae of bees. Here, we report the first-ever detection of the fungus in adult bumble bees that were raised in captivity for studies on colony development. Wild queens of Bombus griseocollis, B. nevadensis and B. vosnesenskii were collected and maintained for establishment of nests. Queens that died during rearing or that did not lay eggs within one month of capture were dissected, and tissues were examined microscopically for the presence of pathogens. Filamentous fungi that were detected were plated on artificial media containing broad spectrum antibiotics for isolation and identification. Based on morphological characters, the fungus was identified as Ascosphaera apis (Maasen ex Claussen) Olive and Spiltoir, a species that has been reported earlier only from larvae of the European honey bee, Apis mellifera, the Asian honey bee, Apis cerana, and the carpenter bee Xylocopa californica arizonensis. The identity of the fungus was confirmed using molecular markers and phylogenetic analysis. Ascosphaera apis was detected in queens of all three bumble bee species examined. Of 150 queens dissected, 12 (8%) contained vegetative and reproductive stages of the fungus. Both fungal stages were also detected in two workers collected from colonies with Ascosphaera-infected B. nevadensis queens. In this study, wild bees could have been infected prior to capture for rearing, or, the A. apis infection could have originated via contaminated European honey bee pollen fed to the bumble bees in captivity. Thus, the discovery of A. apis in adult bumble bees in the current study has important implications for commercial production of bumble bee colonies and highlights potential risks to native bees via pathogen spillover from infected bees and infected pollen.
Kookana, Rai S.; Williams, Mike; Boxall, Alistair B. A.; Larsson, D. G. Joakim; Gaw, Sally; Choi, Kyungho; Yamamoto, Hiroshi; Thatikonda, Shashidhar; Zhu, Yong-Guan; Carriquiriborde, Pedro
2014-01-01
Active pharmaceutical ingredients (APIs) can enter the natural environment during manufacture, use and/or disposal, and consequently public concern about their potential adverse impacts in the environment is growing. Despite the bulk of the human population living in Asia and Africa (mostly in low- or middle-income countries), limited work relating to research, development and regulations on APIs in the environment have so far been conducted in these regions. Also, the API manufacturing sector is gradually shifting to countries with lower production costs. This paper focuses mainly on APIs for human consumption and highlights key differences between the low-, middle- and high-income countries, covering factors such as population and demographics, manufacture, prescriptions, treatment, disposal and reuse of waste and wastewater. The striking differences in populations (both human and animal), urbanization, sewer connectivity and other factors have revealed that the environmental compartments receiving the bulk of API residues differ markedly between low- and high-income countries. High sewer connectivity in developed countries allows capture and treatment of the waste stream (point-source). However, in many low- or middle-income countries, sewerage connectivity is generally low and in some areas waste is collected predominantly in septic systems. Consequently, the diffuse-source impact, such as on groundwater from leaking septic systems or on land due to disposal of raw sewage or septage, may be of greater concern. A screening level assessment of potential burdens of APIs in urban and rural environments of countries representing low- and middle-income as well as high-income has been made. Implications for ecological risks of APIs used by humans in lower income countries are discussed. PMID:25405973
2012-01-01
Background We present a comprehensive transcriptome analysis of the fungus Ascosphaera apis, an economically important pathogen of the Western honey bee (Apis mellifera) that causes chalkbrood disease. Our goals were to further annotate the A. apis reference genome and to identify genes that are candidates for being differentially expressed during host infection versus axenic culture. Results We compared A. apis transcriptome sequence from mycelia grown on liquid or solid media with that dissected from host-infected tissue. 454 pyrosequencing provided 252 Mb of filtered sequence reads from both culture types that were assembled into 10,087 contigs. Transcript contigs, protein sequences from multiple fungal species, and ab initio gene predictions were included as evidence sources in the Maker gene prediction pipeline, resulting in 6,992 consensus gene models. A phylogeny based on 12 of these protein-coding loci further supported the taxonomic placement of Ascosphaera as sister to the core Onygenales. Several common protein domains were less abundant in A. apis compared with related ascomycete genomes, particularly cytochrome p450 and protein kinase domains. A novel gene family was identified that has expanded in some ascomycete lineages, but not others. We manually annotated genes with homologs in other fungal genomes that have known relevance to fungal virulence and life history. Functional categories of interest included genes involved in mating-type specification, intracellular signal transduction, and stress response. Computational and manual annotations have been made publicly available on the Bee Pests and Pathogens website. Conclusions This comprehensive transcriptome analysis substantially enhances our understanding of the A. apis genome and its expression during infection of honey bee larvae. It also provides resources for future molecular studies of chalkbrood disease and ultimately improved disease management. PMID:22747707
Characterization of an Enantioselective Odorant Receptor in the Yellow Fever Mosquito Aedes aegypti
2009-09-15
between insect pheromone receptors expressed in Xenopus oocytes and their cognate pheromone ligands [24,43]. The honey bee Apis mellifera OR11 (AmOR11...136–142. 12. Laska M, Galizia CG (2001) Enantioselectivity of odor perception in honeybees ( Apis mellifera carnica). Behav Neurosci 115: 632–639. 13...Culex quinquefasciatus. Insect Biochem Mol Biol 36: 169–176. 23. Robertson HM, Wanner KW (2006) The chemoreceptor superfamily in the honey bee, Apis
Migrating Department of Defense (DoD) Web Service Based Applications to Mobile Computing Platforms
2012-03-01
World Wide Web Consortium (W3C) Geolocation API to identify the device’s location and then center the map on the device. Finally, we modify the entry...THIS PAGE INTENTIONALLY LEFT BLANK xii List of Acronyms and Abbreviations API Application Programming Interface CSS Cascading Style Sheets CLIMO...Java API for XML Web Services Reference Implementation JS JavaScript JSNI JavaScript Native Interface METOC Meteorological and Oceanographic MAA Mobile
ANTP Protocol Suite Software Implementation Architecture in Python
2011-06-03
a popular platform of networking programming, an area in which C has traditionally dominated. 2 NetController AeroRP AeroNP AeroNP API AeroTP...visualisation of the running system. For example using the Google Maps API , the main logging web page can show all the running nodes in the system. By...communication between AeroNP and AeroRP and runs on the operating system as daemon. Furthermore, it creates an API interface to mange the communication between
Khan, Usman; Bloom, Raanan A; Nicell, James A; Laurenson, James P
2017-12-31
A select few prescription drugs can be especially harmful and, in some cases, fatal with just one dose when not used as prescribed. Therefore, the U. S. Food and Drug Administration (FDA) recommends that expired, unwanted, or otherwise unused portions of most of these drugs be disposed of quickly through a take-back program. If such an option is not readily available, FDA recommends that they be flushed down the sink or toilet. The goal of the current investigation was to evaluate the ecological and human-health risks associated with the environmental release of the 15 active pharmaceutical ingredients (APIs) currently on the FDA "flush list". The evaluation suggests that even when highly conservative assumptions are used-including that the entire API mass supplied for clinical use is flushed, all relevant sources in addition to clinical use of the API are considered, and no metabolic loss, environmental degradation, or dilution of wastewater effluents are used in estimating environmental concentrations-most of these APIs present a negligible eco-toxicological risk, both as individual compounds and as a mixture. For a few of these APIs, additional eco-toxicological data will need to be developed. Using similar conservative assumptions for human-health risks, all 15 APIs present negligible risk through ingestion of water and fish. Published by Elsevier B.V.
Quality investigation of hydroxyprogesterone caproate active pharmaceutical ingredient and injection
Chollet, John L.; Jozwiakowski, Michael J.
2012-01-01
The purpose of this study was to investigate the quality of hydroxyprogesterone caproate (HPC) active pharmaceutical ingredient (API) sources that may be used by compounding pharmacies, compared to the FDA-approved source of the API; and to investigate the quality of HPC injection samples obtained from compounding pharmacies in the US, compared to the FDA-approved product (Makena®). Samples of API were obtained from every source confirmed to be an original manufacturer of the drug for human use, which were all companies in China that were not registered with FDA. Eight of the ten API samples (80%) did not meet the impurity specifications required by FDA for the API used in the approved product. One API sample was found to not be HPC at all; additional laboratory testing showed that it was glucose. Thirty samples of HPC injection obtained from com pounding pharmacies throughout the US were also tested, and eight of these samples (27%) failed to meet the potency requirement listed in the USP monograph for HPC injection and/or the HPLC assay. Sixteen of the thirty injection samples (53%) exceeded the impurity limit setforthe FDA-approved drug product. These results confirm the inconsistency of compounded HPC Injections and suggest that the risk-benefit ratio of using an unapproved compounded preparation, when an FDA-approved drug product is available, is not favorable. PMID:22329865
Using Map Service API for Driving Cycle Detection for Wearable GPS Data: Preprint
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhu, Lei; Gonder, Jeffrey D
Following advancements in smartphone and portable global positioning system (GPS) data collection, wearable GPS data have realized extensive use in transportation surveys and studies. The task of detecting driving cycles (driving or car-mode trajectory segments) from wearable GPS data has been the subject of much research. Specifically, distinguishing driving cycles from other motorized trips (such as taking a bus) is the main research problem in this paper. Many mode detection methods only focus on raw GPS speed data while some studies apply additional information, such as geographic information system (GIS) data, to obtain better detection performance. Procuring and maintaining dedicatedmore » road GIS data are costly and not trivial, whereas the technical maturity and broad use of map service application program interface (API) queries offers opportunities for mode detection tasks. The proposed driving cycle detection method takes advantage of map service APIs to obtain high-quality car-mode API route information and uses a trajectory segmentation algorithm to find the best-matched API route. The car-mode API route data combined with the actual route information, including the actual mode information, are used to train a logistic regression machine learning model, which estimates car modes and non-car modes with probability rates. The experimental results show promise for the proposed method's ability to detect vehicle mode accurately.« less
Locher, Kathrin; Borghardt, Jens M; Frank, Kerstin J; Kloft, Charlotte; Wagner, Karl G
2016-08-01
Biphasic dissolution models are proposed to have good predictive power for the in vivo absorption. The aim of this study was to improve our previously introduced mini-scale dissolution model to mimic in vivo situations more realistically and to increase the robustness of the experimental model. Six dissolved APIs (BCS II) were tested applying the improved mini-scale biphasic dissolution model (miBIdi-pH-II). The influence of experimental model parameters including various excipients, API concentrations, dual paddle and its rotation speed was investigated. The kinetics in the biphasic model was described applying a one- and four-compartment pharmacokinetic (PK) model. The improved biphasic dissolution model was robust related to differing APIs and excipient concentrations. The dual paddle guaranteed homogenous mixing in both phases; the optimal rotation speed was 25 and 75rpm for the aqueous and the octanol phase, respectively. A one-compartment PK model adequately characterised the data of fully dissolved APIs. A four-compartment PK model best quantified dissolution, precipitation, and partitioning also of undissolved amounts due to realistic pH profiles. The improved dissolution model is a powerful tool for investigating the interplay between dissolution, precipitation and partitioning of various poorly soluble APIs (BCS II). In vivo-relevant PK parameters could be estimated applying respective PK models. Copyright © 2016 Elsevier B.V. All rights reserved.
Ridgway, Cathy; Bawuah, Prince; Markl, Daniel; Zeitler, J Axel; Ketolainen, Jarkko; Peiponen, Kai-Erik; Gane, Patrick
2017-06-30
The physical properties and mechanical integrity of pharmaceutical tablets are of major importance when loading with active pharmaceutical ingredient(s) (API) in order to ensure ease of processing, control of dosage and stability during transportation and handling prior to patient consumption. The interaction between API and excipient, acting as functional extender and binder, however, is little understood in this context. The API indomethacin is combined in this study with microcrystalline cellulose (MCC) at increasing loading levels. Tablets from the defined API/MCC ratios are made under conditions of controlled porosity and tablet thickness, resulting from different compression conditions, and thus compaction levels. Mercury intrusion porosimetry is used to establish the accessible pore volume, pore size distribution and, adopting the observed region of elastic intrusion-extrusion at high pressure, an elastic bulk modulus of the skeletal material is recorded. Porosity values are compared to previously published values derived from terahertz (THz) refractive index data obtained from exactly the same tablet sample sets. It is shown that the elastic bulk modulus is dependent on API wt% loading under constant tablet preparation conditions delivering equal dimensions and porosity. The findings are considered of novel value in respect to establishing consistency of tablet production and optimisation of physical properties. Copyright © 2017 Elsevier B.V. All rights reserved.
Van Eerdenbrugh, Bernard; Raina, Shweta; Hsieh, Yi-Ling; Augustijns, Patrick; Taylor, Lynne S
2014-04-01
To classify the crystallization behavior of amorphous active pharmaceutical ingredients (API) exposed to aqueous environments. A set of approximately 50 chemically and physically diverse active pharmaceutical ingredients (APIs) was selected for this study. Two experimental setups were employed to characterize the crystallization behavior of the amorphous API in an aqueous environment. For the first approach, precipitation, as evidenced by the development of turbidity, was induced using the solvent shift method, by mixing concentrated API solutions in DMSO with an aqueous buffer in a capillary. Subsequently, crystallization was monitored in situ over time using synchrotron radiation (simultaneous SAXS/WAXS beamline 12-ID-B at the Advanced Photon Source, Argonne National Laboratories, Argonne, IL). In the second approach, amorphous films were prepared by melt quenching; after adding buffer, crystallization was monitored with time using polarized light microscopy. In general, the crystallization behavior of a given compound was similar irrespective of the experimental method employed. However, the crystallization behavior among different compounds varied significantly, ranging from immediate and complete crystallization to no observable crystallization over biorelevant time scales. Comparison of the observed behavior with previous studies of crystallization tendency in non-aqueous environments revealed that the crystallization tendency of individual APIs was somewhat similar regardless of the crystallization environment. API properties, rather than the method by which amorphous materials are generated, tend to dictate crystallization behavior in aqueous media.
Lu, Hsiao-ling; Tanguy, Sylvie; Rispe, Claude; Gauthier, Jean-Pierre; Walsh, Tom; Gordon, Karl; Edwards, Owain; Tagu, Denis; Chang, Chun-che; Jaubert-Possamai, Stéphanie
2011-01-01
Piwi-interacting RNAs (piRNAs) are known to regulate transposon activity in germ cells of several animal models that propagate sexually. However, the role of piRNAs during asexual reproduction remains almost unknown. Aphids that can alternate sexual and asexual reproduction cycles in response to seasonal changes of photoperiod provide a unique opportunity to study piRNAs and the piRNA pathway in both reproductive modes. Taking advantage of the recently sequenced genome of the pea aphid Acyrthosiphon pisum, we found an unusually large lineage-specific expansion of genes encoding the Piwi sub-clade of Argonaute proteins. In situ hybridisation showed differential expressions between the duplicated piwi copies: while Api-piwi2 and Api-piwi6 are “specialised” in germ cells their most closely related copy, respectively Api-piwi5 and Api-piwi3, are expressed in the somatic cells. The differential expression was also identified in duplicated ago3: Api-ago3a in germ cells and Api-ago3b in somatic cells. Moreover, analyses of expression profiles of the expanded piwi and ago3 genes by semi-quantitative RT-PCR showed that expressions varied according to the reproductive types. These specific expression patterns suggest that expanded aphid piwi and ago3 genes have distinct roles in asexual and sexual reproduction. PMID:22162754
Evaluation of National Adaptation Planning: A Case Study in Indonesia
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kawanishi, Masato; Ridwan, Nadia Amelia
2016-01-01
The present study aims to evaluate national adaptation planning, using the National Action Plan for Climate Change Adaptation (RAN-API) in Indonesia as a case. In doing so, the current study applies the methodology used in Preston et al. (2011), where a set of 57 adaptation plans from three developed countries was evaluated against 19 planning processes. The same criteria and scoring system were applied to the current study to evaluate RAN-API, both as identified in its document and as viewed by the stakeholders. A desktop review and questionnaires were undertaken to this end. It was found that discrepancies exist betweenmore » the status of RAN-API as documented and the stakeholders views of some criteria, suggesting that information or knowledge gaps may still exist despite the efforts made for stakeholder engagement. In some of the other criteria, the stakeholders views match the status as identified in the document. Most notably, they both agree that the weakness of RAN-API is related to limited consideration for non-climatic factors. While the development of RAN-API is a critical step taken in the country, the current study finds that there remains room for further improvement. The criteria or indicators to be used to assess the progress of RAN-API as a whole may need to be further elaborated.« less
Interspecific utilisation of wax in comb building by honeybees
NASA Astrophysics Data System (ADS)
Hepburn, H. Randall; Radloff, Sarah E.; Duangphakdee, Orawan; Phaincharoen, Mananya
2009-06-01
Beeswaxes of honeybee species share some homologous neutral lipids; but species-specific differences remain. We analysed behavioural variation for wax choice in honeybees, calculated the Euclidean distances for different beeswaxes and assessed the relationship of Euclidean distances to wax choice. We tested the beeswaxes of Apis mellifera capensis, Apis florea, Apis cerana and Apis dorsata and the plant and mineral waxes Japan, candelilla, bayberry and ozokerite as sheets placed in colonies of A. m. capensis, A. florea and A. cerana. A. m. capensis accepted the four beeswaxes but removed Japan and bayberry wax and ignored candelilla and ozokerite. A. cerana colonies accepted the wax of A. cerana, A. florea and A. dorsata but rejected or ignored that of A. m. capensis, the plant and mineral waxes. A. florea colonies accepted A. cerana, A. dorsata and A. florea wax but rejected that of A. m. capensis. The Euclidean distances for the beeswaxes are consistent with currently prevailing phylogenies for Apis. Despite post-speciation chemical differences in the beeswaxes, they remain largely acceptable interspecifically while the plant and mineral waxes are not chemically close enough to beeswax for their acceptance.
Visualizing the geography of genetic variants.
Marcus, Joseph H; Novembre, John
2017-02-15
One of the key characteristics of any genetic variant is its geographic distribution. The geographic distribution can shed light on where an allele first arose, what populations it has spread to, and in turn on how migration, genetic drift, and natural selection have acted. The geographic distribution of a genetic variant can also be of great utility for medical/clinical geneticists and collectively many genetic variants can reveal population structure. Here we develop an interactive visualization tool for rapidly displaying the geographic distribution of genetic variants. Through a REST API and dynamic front-end, the Geography of Genetic Variants (GGV) browser ( http://popgen.uchicago.edu/ggv/ ) provides maps of allele frequencies in populations distributed across the globe. GGV is implemented as a website ( http://popgen.uchicago.edu/ggv/ ) which employs an API to access frequency data ( http://popgen.uchicago.edu/freq_api/ ). Python and javascript source code for the website and the API are available at: http://github.com/NovembreLab/ggv/ and http://github.com/NovembreLab/ggv-api/ . jnovembre@uchicago.edu. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.
A theoretical analysis of deformation behavior of auxetic plied yarn structure
NASA Astrophysics Data System (ADS)
Zeng, Jifang; Hu, Hong
2018-07-01
This paper presents a theoretical analysis of the auxetic plied yarn (APY) structure formed with two types of single yarns having different diameter and modulus. A model which can be used to predict its deformation behavior under axial extension is developed based on the theoretical analysis. The developed model is first compared with the experimental data obtained in the previous study, and then used to predict the effects of different structural and material parameters on the auxetic behavior of the APY. The calculation results show that the developed model can correctly predict the variation trend of the auxetic behavior of the APY, which first increases and then decrease with the increase of the axial strain. The calculation results also indicate that the auxetic behavior of the APY simultaneously depends on the diameter ratio of the soft yarn and stiff yarn as well as the ratio between the pitch length and stiff yarn diameter. The study provides a way to design and fabricate APYs with the same auxetic behavior by using different soft and stiff yarns as long as these two ratios are kept unchanged.
PrismTech Data Distribution Service Java API Evaluation
NASA Technical Reports Server (NTRS)
Riggs, Cortney
2008-01-01
My internship duties with Launch Control Systems required me to start performance testing of an Object Management Group's (OMG) Data Distribution Service (DDS) specification implementation by PrismTech Limited through the Java programming language application programming interface (API). DDS is a networking middleware for Real-Time Data Distribution. The performance testing involves latency, redundant publishers, extended duration, redundant failover, and read performance. Time constraints allowed only for a data throughput test. I have designed the testing applications to perform all performance tests when time is allowed. Performance evaluation data such as megabits per second and central processing unit (CPU) time consumption were not easily attainable through the Java programming language; they required new methods and classes created in the test applications. Evaluation of this product showed the rate that data can be sent across the network. Performance rates are better on Linux platforms than AIX and Sun platforms. Compared to previous C++ programming language API, the performance evaluation also shows the language differences for the implementation. The Java API of the DDS has a lower throughput performance than the C++ API.
Minimizing E-factor in the continuous-flow synthesis of diazepam and atropine.
Bédard, Anne-Catherine; Longstreet, Ashley R; Britton, Joshua; Wang, Yuran; Moriguchi, Hideki; Hicklin, Robert W; Green, William H; Jamison, Timothy F
2017-12-01
Minimizing the waste stream associated with the synthesis of active pharmaceutical ingredients (APIs) and commodity chemicals is of high interest within the chemical industry from an economic and environmental perspective. In exploring solutions to this area, we herein report a highly optimized and environmentally conscious continuous-flow synthesis of two APIs identified as essential medicines by the World Health Organization, namely diazepam and atropine. Notably, these approaches significantly reduced the E-factor of previously published routes through the combination of continuous-flow chemistry techniques, computational calculations and solvent minimization. The E-factor associated with the synthesis of atropine was reduced by 94-fold (about two orders of magnitude), from 2245 to 24, while the E-factor for the synthesis of diazepam was reduced by 4-fold, from 36 to 9. Copyright © 2017 Elsevier Ltd. All rights reserved.
Polonini, H C; Silva, S L; Cunha, C N; Brandão, M A F; Ferreira, A O
2016-04-01
A challenge with compounding oral liquid formulations is the limited availability of data to support the physical, chemical and microbiological stability of the formulation. This poses a patient safety concern and a risk for medication errors. The objective of this study was to evaluate the compatibility of the following active pharmaceutical ingredients (APIs) in 10 oral suspensions, using SyrSpend SF PH4 (liquid) as the suspending vehicle: cholecalciferol 50,000 IU/mL, haloperidol 0.5 mg/mL, imipramine hydrochloride 5.0 mg/mL, levodopa/carbidopa 5.0/1.25 mg/mL, lorazepam 1.0 mg/mL, minocycline hydrochloride 10.0 mg/mL, tacrolimus monohydrate 1.0 mg/mL, terbinafine 25.0 mg/mL, tramadol hydrochloride 10.0 mg/mL and valsartan 4.0 mg/mL. The suspensions were stored both refrigerated (2 - 8 degrees C) and at controlled room temperature (20 - 25 degrees C). This is the first stability study for these APIs in SyrSpend SF PH4 (liquid). Further, the stability of haloperidol,ilmipramine hydrochloride, minocycline, and valsartan in oral suspension has not been previously reported in the literature. Compatibility was assessed by measuring percent recovery at varying time points throughout a 90 days period. Quantification of the APIs was performed by high performance liquid chromatography (HPLC-UV). Given the percentage of recovery of the APIs within the suspensions, the beyond-use date of the final preparations was found to be at least 90 days for most suspensions both refrigerated and at room temperature. Exceptions were: Minocycline hydrochloride at both storage temperatures (60 days), levodopa/carbidopa at room temperature (30 days), and lorazepam at room temperature (60 days). This suggests that compounded suspensions of APIs from different pharmacological classes in SyrSpend SF PH4 (liquid) are stable.
Reactome Pengine: A web-logic API to the homo sapiens reactome.
Neaves, Samuel R; Tsoka, Sophia; Millard, Louise A C
2018-03-30
Existing ways of accessing data from the Reactome database are limited. Either a researcher is restricted to particular queries defined by a web application programming interface (API), or they have to download the whole database. Reactome Pengine is a web service providing a logic programming based API to the human reactome. This gives researchers greater flexibility in data access than existing APIs, as users can send their own small programs (alongside queries) to Reactome Pengine. The server and an example notebook can be found at https://apps.nms.kcl.ac.uk/reactome-pengine. Source code is available at https://github.com/samwalrus/reactome-pengine and a Docker image is available at https://hub.docker.com/r/samneaves/rp4/ . samuel.neaves@kcl.ac.uk. Supplementary data are available at Bioinformatics online.
Bi, Yaw
2018-01-01
Although drug-based treatment is the primary intervention for malaria control and elimination, optimal use of targeted treatments remains unclear. From 2008 to 2016, three targeted programs on treatment were undertaken in Kachin Special Region II (KR2), Myanmar. Program I (2008–2011) treated all confirmed, clinical and suspected cases; program II (2012–2013) treated confirmed and clinical cases; and program III (2014–2016) targeted confirmed cases only. This study aims to evaluate the impacts of the three programs on malaria burden individually based on the annual parasite incidence (API), slide positivity rate (SPR) and their relative values. The API is calculated from original collected data and the incidence rate ratio (IRR) for each year is calculated by using the first-year API as a reference in each program phase across the KR2. Same method is applied to calculate SPR and risk ratio (RR) at the sentinel hospital too. During program I (2008–2011), malaria burden was reduced by 61% (95%CI: 58%-74%) and the actual API decreased from 9.8 (95%CI: 9.6–10.1) per 100 person-years in 2008 to 3.8 (3.6–4.1) per 100 person-years in 2011. Amid program II (2012–2013), the malaria burden increased by 33% (95%CI: 22%-46%) and the actual API increased from 2.1(95%CI: 2.0–2.3) per 100 person-years in 2012 to 2.8 (95%CI: 2.7–2.9) per 100 person-years in 2013. During program III (2014–2016) the malaria burden increased furtherly by 60% (95%CI: 51% - 69%) and the actual API increased from 3.2(95%CI: 3.0–3.3) per 100 person-years in 2014 to 5.1 (95%CI: 4.9–5.2) per 100 person-years in 2016. Results of the slide positivity of the sentinel hospital also confirm these results. Resurgence of malaria was mainly due to Plasmodium vivax during program II and III. This study indicates that strategy adopted in program I (2008–2011) should be more appropriate for the KR2. Quality-assured treatment of all confirmed, clinical and suspected malaria cases may be helpful for the reduction of malaria burden. PMID:29614088
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gunter, Dan; Lee, Jason; Stoufer, Martin
2003-03-28
The NetLogger Toolkit is designed to monitor, under actual operating conditions, the behavior of all the elements of the application-to-application communication path in order to determine exactly where time is spent within a complex system Using NetLogger, distnbuted application components are modified to produce timestamped logs of "interesting" events at all the critical points of the distributed system Events from each component are correlated, which allov^ one to characterize the performance of all aspects of the system and network in detail. The NetLogger Toolkit itself consists of four components an API and library of functions to simplify the generation ofmore » application-level event logs, a set of tools for collecting and sorting log files, an event archive system, and a tool for visualization and analysis of the log files In order to instrument an application to produce event logs, the application developer inserts calls to the NetLogger API at all the critical points in the code, then links the application with the NetLogger library All the tools in the NetLogger Toolkit share a common log format, and assume the existence of accurate and synchronized system clocks NetLogger messages can be logged using an easy-to-read text based format based on the lETF-proposed ULM format, or a binary format that can still be used through the same API but that is several times faster and smaller, with performance comparable or better than binary message formats such as MPI, XDR, SDDF-Binary, and PBIO. The NetLogger binary format is both highly efficient and self-describing, thus optimized for the dynamic message construction and parsing of application instrumentation. NetLogger includes an "activation" API that allows NetLogger logging to be turned on, off, or modified by changing an external file This IS useful for activating logging in daemons/services (e g GndFTP server). The NetLogger reliability API provides the ability to specify backup logging locations and penodically try to reconnect broken TCP pipe. A typical use for this is to store data on local disk while net is down. An event archiver can log one or more incoming NetLogger streams to a local disk file (netlogd) or to a mySQL database (netarchd). We have found exploratory, visual analysis of the log event data to be the most useful means of determining the causes of performance anomalies The NetLogger Visualization tool, niv, has been developed to provide a flexible and interactive graphical representation of system-level and application-level events.« less
Limitations of high dose carrier based formulations.
Yeung, Stewart; Traini, Daniela; Tweedie, Alan; Lewis, David; Church, Tanya; Young, Paul M
2018-06-10
This study was performed to investigate how increasing the active pharmaceutical ingredient (API) content within a formulation affects the dispersion of particles and the aerosol performance efficiency of a carrier based dry powder inhalable (DPI) formulation, using a custom dry powder inhaler (DPI) development rig. Five formulations with varying concentrations of API beclomethasone dipropionate (BDP) between 1% and 30% (w/w) were formulated as a multi-component carrier system containing coarse lactose and fine lactose with magnesium stearate. The morphology of the formulation and each component were investigated using scanning electron micrographs while the particle size was measured by laser diffraction. The aerosol performance, in terms of aerodynamic diameter, was assessed using the British pharmacopeia Apparatus E cascade impactor (Next generation impactor). Chemical analysis of the API was observed by high performance liquid chromatography (HPLC). Increasing the concentration of BDP in the blend resulted in increasing numbers and size of individual agglomerates and densely packed BDP multi-layers on the surface of the lactose carrier. BDP present within the multi-layer did not disperse as individual primary particles but as dense agglomerates, which led to a decrease in aerosol performance and increased percentage of BDP deposition within the Apparatus E induction port and pre-separator. As the BDP concentration in the blends increases, aerosol performance of the formulation decreases, in an inversely proportional manner. Concurrently, the percentage of API deposition in the induction port and pre-separator could also be linked to the amount of micronized particles (BDP and Micronized composite carrier) present in the formulation. The effect of such dose increase on the behaviour of aerosol dispersion was investigated to gain greater insight in the development and optimisation of higher dosed carrier-based formulations. Copyright © 2018 Elsevier B.V. All rights reserved.
[Cross reactions between Hymenoptera venoms from different families, genera and species].
Hemmer, W
2014-09-01
Simultaneous reactivity with the venoms of different Hymenoptera is commonly seen in patients allergic to insect venoms. Strong, though individually variable, cross-reactivity occurs between the venoms of different Vespinae species (Vespula, Dolichovespula, Vespa). In Middle Europe, anaphylaxis after European hornet stings is nearly always due to cross-reactivity with Vespula venom. The identification of the primary venom in patients testing positive for Vespula and Polistes (paper wasps) is particularly important in Mediterranean areas. Component-resolved diagnosis with the marker allergens Ves v 5 and Pol d 5 may directly identify the causative venom in the majority of patients. There is substantial cross-reactivity between honeybee and bumblebee venom, sometimes causing allergic symptoms in patients allergic to honeybee venom after accidental bumblebee stings. However, subjects strongly exposed to bumblebees may show bumblebee-specific sensitization and require immunotherapy with bumblebee venom. More than half of all venom-allergic patients show double-positive test results to honeybee and vespid venoms. This may be due to true double sensitization or due to cross-reactivity between homologous allergens present in both venoms and sharing around 50 % sequence identity, i.e. hyaluronidases (Api m 2/Ves v 2), dipeptidyl peptidases (Api m 5/Ves v 3), and vitellogenins (Api m 12/Ves v 6). The clinical relevance of these cross-reactions is unknown. In up to 50 % the double-positivity is caused by clinically irrelevant IgE antibodies against CCDs. Many (though not all) patients with true double sensitization may be identified by means of the species-specific marker allergens Api m 1 and Ves v 1/5. Some Vespula venom-allergic patients may clinically cross-react to fire ant stings (Solenopsis), but otherwise allergen relationships with other ant species are not well studied.
Sensitivity Analysis of Fatigue Crack Growth Model for API Steels in Gaseous Hydrogen.
Amaro, Robert L; Rustagi, Neha; Drexler, Elizabeth S; Slifka, Andrew J
2014-01-01
A model to predict fatigue crack growth of API pipeline steels in high pressure gaseous hydrogen has been developed and is presented elsewhere. The model currently has several parameters that must be calibrated for each pipeline steel of interest. This work provides a sensitivity analysis of the model parameters in order to provide (a) insight to the underlying mathematical and mechanistic aspects of the model, and (b) guidance for model calibration of other API steels.
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
Chen, Dafu; Guo, Rui; Xu, Xijian; Xiong, Cuiling; Liang, Qin; Zheng, Yanzhen; Luo, Qun; Zhang, Zhaonan; Huang, Zhijian; Kumar, Dhiraj; Xi, Weijun; Zou, Xuan; Liu, Min
2017-07-20
Honeybees are susceptible to a variety of diseases, including chalkbrood, which is capable of causing huge losses of both the number of bees and colony productivity. This research is designed to characterize the transcriptome profiles of Ascosphaera apis-treated and un-treated larval guts of Apis mellifera ligustica in an attempt to unravel the molecular mechanism underlying the immune responses of western honeybee larval guts to mycosis. In this study, 24, 296 and 2157 genes were observed to be differentially expressed in A. apis-treated Apis mellifera (4-, 5- and 6-day-old) compared with un-treated larval guts. Moreover, the expression patterns of differentially expressed genes (DEGs) were examined via trend analysis, and subsequently, gene ontology analysis and KEGG pathway enrichment analysis were conducted for DEGs involved in up- and down-regulated profiles. Immunity-related pathways were selected for further analysis, and our results demonstrated that a total of 13 and 50 DEGs were annotated in the humoral immune-related and cellular immune-related pathways, respectively. Additionally, we observed that many DEGs up-regulated in treated guts were part of cellular immune pathways, such as the lysosome, ubiquitin mediated proteolysis, and insect hormone biosynthesis pathways and were induced by A. apis invasion. However, more down-regulated DEGs were restrained. Surprisingly, a majority of DEGs within the Toll-like receptor signaling pathway, and the MAPK signaling pathway were up-regulated in treated guts, while all but two genes involved in the NF-κB signaling pathway were down-regulated, which suggested that most genes involved in humoral immune-related pathways were activated in response to the invasive fungal pathogen. This study's findings provide valuable information regarding the investigation of the molecular mechanism of immunity defenses of A. m. ligustica larval guts to infection with A. apis. Furthermore, these studies lay the groundwork for future researches on key genes controlling the susceptibility of A. m. ligustica larvae to chalkbrood. Copyright © 2017 Elsevier B.V. All rights reserved.
Schaefer, C; Lecomte, C; Clicq, D; Merschaert, A; Norrant, E; Fotiadu, F
2013-09-01
The final step of an active pharmaceutical ingredient (API) manufacturing synthesis process consists of a crystallization during which the API and residual solvent contents have to be quantified precisely in order to reach a predefined seeding point. A feasibility study was conducted to demonstrate the suitability of on-line NIR spectroscopy to control this step in line with new version of the European Medicines Agency (EMA) guideline [1]. A quantitative method was developed at laboratory scale using statistical design of experiments (DOE) and multivariate data analysis such as principal component analysis (PCA) and partial least squares (PLS) regression. NIR models were built to quantify the API in the range of 9-12% (w/w) and to quantify the residual methanol in the range of 0-3% (w/w). To improve the predictive ability of the models, the development procedure encompassed: outliers elimination, optimum model rank definition, spectral range and spectral pre-treatment selection. Conventional criteria such as, number of PLS factors, R(2), root mean square errors of calibration, cross-validation and prediction (RMSEC, RMSECV, RMSEP) enabled the selection of three model candidates. These models were tested in the industrial pilot plant during three technical campaigns. Results of the most suitable models were evaluated against to the chromatographic reference methods. Maximum relative bias of 2.88% was obtained about API target content. Absolute bias of 0.01 and 0.02% (w/w) respectively were achieved at methanol content levels of 0.10 and 0.13% (w/w). The repeatability was assessed as sufficient for the on-line monitoring of the 2 analytes. The present feasibility study confirmed the possibility to use on-line NIR spectroscopy as a PAT tool to monitor in real-time both the API and the residual methanol contents, in order to control the seeding of an API crystallization at industrial scale. Furthermore, the successful scale-up of the method proved its capability to be implemented in the manufacturing plant with the launch of the new API process. Copyright © 2013 Elsevier B.V. All rights reserved.
Nelson, Nadine; Szekeres, Karoly; Iclozan, Cristina; Rivera, Ivannie Ortiz; McGill, Andrew; Johnson, Gbemisola; Nwogu, Onyekachi
2017-01-01
Pancreatic cancer (PC) evades immune destruction by favoring the development of regulatory T cells (Tregs) that inhibit effector T cells. The transcription factor Ikaros is critical for lymphocyte development, especially T cells. We have previously shown that downregulation of Ikaros occurs as a result of its protein degradation by the ubiquitin-proteasome system in our Panc02 tumor-bearing (TB) mouse model. Mechanistically, we observed a deregulation in the balance between Casein Kinase II (CK2) and protein phosphatase 1 (PP1), which suggested that increased CK2 activity is responsible for regulating Ikaros’ stability in our model. We also showed that this loss of Ikaros expression is associated with a significant decrease in CD4+ and CD8+ T cell percentages but increased CD4+CD25+ Tregs in TB mice. In this study, we evaluated the effects of the dietary flavonoid apigenin (API), on Ikaros expression and T cell immune responses. Treatment of splenocytes from naïve mice with (API) stabilized Ikaros expression and prevented Ikaros downregulation in the presence of murine Panc02 cells in vitro, similar to the proteasome inhibitor MG132. In vivo treatment of TB mice with apigenin (TB-API) improved survival, reduced tumor weights and prevented splenomegaly. API treatment also restored protein expression of some Ikaros isoforms, which may be attributed to its moderate inhibition of CK2 activity from splenocytes of TB-API mice. This partial restoration of Ikaros expression was accompanied by a significant increase in CD4+ and CD8+ T cell percentages and a reduction in Treg percentages in TB-API mice. In addition, CD8+ T cells from TB-API mice produced more IFN-γ and their splenocytes were better able to prime allogeneic CD8+ T cell responses compared to TB mice. These results provide further evidence that Ikaros is regulated by CK2 in our pancreatic cancer model. More importantly, our findings suggest that API may be a possible therapeutic agent for stabilizing Ikaros expression and function to maintain T cell homeostasis in murine PC. PMID:28152014
Genetics Home Reference: Coffin-Lowry syndrome
... 27(1):85-9. Citation on PubMed Hunter AG. Coffin-Lowry syndrome: a 20-year follow-up ... qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map Subscribe Customer Support USA. ...
Genetics Home Reference: Dent disease
... 20. Review. Citation on PubMed Wrong OM, Norden AG, Feest TG. Dent's disease; a familial proximal renal ... qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map Subscribe Customer Support USA. ...
Miksík, Ivan; Mikulíková, Katerina; Pácha, Jirí; Kucka, Marek; Deyl, Zdenek
2004-02-05
A high-performance liquid chromatography-atmospheric pressure ionization-electrospray ionization mass spectrometry (HPLC-API-ESI-MS) method was developed for the analysis of steroids in a study of steroid-converting enzymes. Separations ware done on a Zorbax Eclipse XDB-C18 column (eluted with a linear methanol-water-acetic acid gradient) and identification of the steroids involved was done by API-ESI-MS using positive ion mode and extracted ion analysis. The applicability of the present method for studying steroid metabolism was proven in assaying two steroid-converting enzymes (20beta-hydroxysteroid dehydrogenase and 11beta-hydroxysteroid dehydrogenase) in various biological samples (rat and chicken intestine, chicken oviduct).
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2014 CFR
2014-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2013 CFR
2013-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2012 CFR
2012-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2011 CFR
2011-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Donner, G.; Subler, W.
1995-12-31
API 541 Third Edition is a standard that covers the minimum requirements for all form wound squirrel cage induction motors above NEMA 440 frame sizes (normally 250 HP and above). The standard is intended to be used to describe motors that will be used by the petroleum industry. The purpose of API 541 is to serve as a comprehensive standard which can be used by specifiers of high performance motors. Users no longer have to prepare their own purchase specifications, and manufacturers can produce a standard motor that will be widely accepted and competitively priced. The API 541 Standard ismore » revised on a 5 year cycle to insure that it is always timely and reflects the latest technology.« less
Silici, Sibel; Kutluca, Semiramis
2005-05-13
The chemical analysis and antibacterial activity of three types of propolis collected three different races of Apis mellifera bee in the same apiary were investigated. Propolis samples were investigated by GC/MS, 48 compounds were identified 32 being new for propolis. The compounds identified indicated that the main plant sources of propolis were Populus alba, Populus tremuloides and Salix alba. The antimicrobial activity against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Candida albicans was evaluated. Ethanolic extracts of propolis samples showed high antibacterial activity against Gram-positive cocci (Staphylococcus aureus), but had a weak activity against Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) and yeast (Candida albicans). Propolis sample collected by Apis mellifera caucasica showed a higher antibacterial activity than collected by Apis mellifera anatolica and Apis mellifera carnica.
Enabling Mobile Air Quality App Development with an AirNow API
NASA Astrophysics Data System (ADS)
Dye, T.; White, J. E.; Ludewig, S. A.; Dickerson, P.; Healy, A. N.; West, J. W.; Prince, L. A.
2013-12-01
The U.S. Environmental Protection Agency's (EPA) AirNow program works with over 130 participating state, local, and federal air quality agencies to obtain, quality control, and store real-time air quality observations and forecasts. From these data, the AirNow system generates thousands of maps and products each hour. Each day, information from AirNow is published online and in other media to assist the public in making health-based decisions related to air quality. However, an increasing number of people use mobile devices as their primary tool for obtaining information, and AirNow has responded to this trend by publishing an easy-to-use Web API that is useful for mobile app developers. This presentation will describe the various features of the AirNow application programming interface (API), including Representational State Transfer (REST)-type web services, file outputs, and RSS feeds. In addition, a web portal for the AirNow API will be shown, including documentation on use of the system, a query tool for configuring and running web services, and general information about the air quality data and forecasts available. Data published via the AirNow API includes corresponding Air Quality Index (AQI) levels for each pollutant. We will highlight examples of mobile apps that are using the AirNow API to provide location-based, real-time air quality information. Examples will include mobile apps developed for Minnesota ('Minnesota Air') and Washington, D.C. ('Clean Air Partners Air Quality'), and an app developed by EPA ('EPA AirNow').
Baltazar, Ludmila Matos; Werneck, Silvia Maria Cordeiro; Soares, Betânia Maria; Ferreira, Marcus Vinicius L.; Souza, Danielle G.; Pinotti, Marcos; Santos, Daniel Assis
2015-01-01
Paracoccidioidomycosis (PCM) is a public health concern in Latin America and South America that when not correctly treated can lead to patient death. In this study, the influence of melanin produced by Paracoccidioides spp. on the effects of treatment with antimicrobial photodynamic inhibition (aPI) and antifungal drugs was evaluated. aPI was performed using toluidine blue (TBO) as a photosensitizer and a 630-nm light-emitting diode (LED) light. The antifungals tested were itraconazole and amphotericin B. We evaluated the effects of each approach, aPI or antifungals, against nonmelanized and melanized yeast cells by performing susceptibility tests and by quantifying oxidative and nitrosative bursts during the experiments. aPI reduced nonmelanized cells by 3.0 log units and melanized cells by 1.3 log units. The results showed that melanization protects the fungal cell, probably by acting as a scavenger of nitric oxide and reactive oxygen species, but not of peroxynitrite. Melanin also increased the MICs of itraconazole and amphotericin B, and the drugs were fungicidal for nonmelanized and fungistatic for melanized yeast cells. Our study shows that melanin production by Paracoccidioides yeast cells serves a protective function during aPI and treatment with itraconazole and amphotericin B. The results suggest that melanin binds to the drugs, changing their antifungal activities, and also acts as a scavenger of reactive oxygen species and nitric oxide, but not of peroxynitrite, indicating that peroxynitrite is the main radical that is responsible for fungal death after aPI. PMID:25896704
Avdeef, Alex
2018-02-02
To predict the aqueous solubility product (K sp ) and the solubility enhancement of cocrystals (CCs), using an approach based on measured drug and coformer intrinsic solubility (S 0 API , S 0 cof ), combined with in silico H-bond descriptors. A regression model was constructed, assuming that the concentration of the uncharged drug (API) can be nearly equated to drug intrinsic solubility (S 0 API ) and that the concentration of the uncharged coformer can be estimated from a linear combination of the log of the coformer intrinsic solubility, S 0 cof , plus in silico H-bond descriptors (Abraham acidities, α, and basicities, β). The optimal model found for n:1 CCs (-log 10 form) is pK sp = 1.12 n pS 0 API + 1.07 pS 0 cof + 1.01 + 0.74 α API ·β cof - 0.61 β API ; r 2 = 0.95, SD = 0.62, N = 38. In illustrative CC systems with unknown K sp , predicted K sp was used in simulation of speciation-pH profiles. The extent and pH dependence of solubility enhancement due to CC formation were examined. Suggestions to improve assay design were made. The predicted CC K sp can be used to simulate pH-dependent solution characteristics of saturated systems containing CCs, with the aim of ranking the selection of coformers, and of optimizing the design of experiments.
Watanabe, Haruna; Tamura, Ikumi; Abe, Ryoko; Takanobu, Hitomi; Nakamura, Ataru; Suzuki, Toshinari; Hirose, Akihiko; Nishimura, Tetsuji; Tatarazako, Norihisa
2016-04-01
Principles of concentration addition and independent action have been used as effective tools to predict mixture toxicity based on individual component toxicity. The authors investigated the toxicity of a pharmaceutical mixture composed of the top 10 detected active pharmaceutical ingredients (APIs) in the Tama River (Tokyo, Japan) in a relevant concentration ratio. Both individual and mixture toxicities of the 10 APIs were evaluated by 3 short-term chronic toxicity tests using the alga Pseudokirchneriella subcapitata, the daphnid Ceriodaphnia dubia, and the zebrafish Danio rerio. With the exception of clarithromycin toxicity to alga, the no-observed-effect concentration of individual APIs for each test species was dramatically higher than the highest concentration of APIs found in the environment. The mixture of 10 APIs resulted in toxicity to alga, daphnid, and fish at 6.25 times, 100 times, and 15,000 times higher concentrations, respectively, than the environmental concentrations of individual APIs. Predictions by concentration addition and independent action were nearly identical for alga, as clarithromycin was the predominant toxicant in the mixture. Both predictions described the observed mixture toxicity to alga fairly well, whereas they slightly underestimated the observed mixture toxicity in the daphnid test. In the fish embryo test, the observed toxicity fell between the predicted toxicity by concentration addition and independent action. These results suggested that the toxicity of environmentally relevant pharmaceutical mixtures could be predicted by individual toxicity using either concentration addition or independent action. © 2015 SETAC.
NASA Astrophysics Data System (ADS)
Kissi, Eric Ofosu; Bawuah, Prince; Silfsten, Pertti; Peiponen, Kai-Erik
2015-03-01
In order to find counterfeit drugs quickly and reliably, we have developed `tape method' a transmission spectroscopic terahertz (THz) measurement technique and compared it with a standard attenuated total reflection (ATR) THz spectroscopic measurement. We used well-known training samples, which include commercial paracetamol and aspirin tablets to check the validity of these two measurement techniques. In this study, the spectral features of some active pharmaceutical ingredients (APIs), such as aspirin and paracetamol are characterized for identification purpose. This work covers a wide THz spectral range namely, 2-18 THz. This proposed simple but novel technique, the tape method, was used for characterizing API and identifying their presence in their dosage forms. By comparing the spectra of the APIs to their dosage forms (powder samples), all distinct fingerprints present in the APIs are also present in their respective dosage forms. The positions of the spectral features obtained with the ATR techniques were akin to that obtained from the tape method. The ATR and the tape method therefore, complement each other. The presence of distinct fingerprints in this spectral range has highlighted the possibility of developing fast THz sensors for the screening of pharmaceuticals. It is worth noting that, the ATR method is applicable to flat faced tablets whereas the tape method is suitable for powders in general (e.g. curved surface tablets that require milling before measurement). Finally, we have demonstrated that ATR techniques can be used to screen counterfeit antimalarial tablets.
Noor, Mehwish Jamil; Sultana, Shazia; Fatima, Sonia; Ahmad, Mushtaq; Zafar, Muhammad; Sarfraz, Maliha; Balkhyour, Masour A; Safi, Sher Zaman; Ashraf, Muhammad Aqeel
2015-06-01
Mitigating industrial air pollution is a big challenge, in such scenario screening of plants as a bio monitor is extremely significant. It requires proper selection and screening of sensitive and tolerant plant species which are bio indicator and sink for air pollution. The present study was designed to evaluate the Air Pollution Tolerance Index (APTI) and Anticipated Performance Index (API) of the common flora. Fifteen common plant species from among trees, herb and shrubs i.e. Chenopodium album (Chenopodiaceae), Parthenium hysterophorus (Asteraceae), Amaranthus viridis (Amaranthaceae), Lantana camara (Verbenaceaea), Ziziphus nummulari (Rhamnaceae), Silibum merianum (Asteraceae), Cannabis sativa (Cannabinaceae), Calatropis procera (Asclepediaceae), Ricinus communis (Euphorbiaceae), Melia azadirachta (Meliaceae), Psidium guajava (Myrtaceae), Eucalyptus globules (Myrtaceae), Broussonetia papyrifera (Moraceae), Withania somnifera (Solanaceae) and Sapium sabiferum (Euphorbiaceae) were selected growing frequently in vicinity of Marble industries in Potwar region. APTI and API of selected plant species were analyzed by determining important biochemical parameter i.e. total chlorophyll, ascorbic acid, relative water content and pH etc. Furthermore the selected vegetation was studied for physiological, economic, morphological and biological characteristics. The soil of studied sites was analyzed. It was found that most the selected plant species are sensitive to air pollution. However B. papyrifera, E. globulus and R. communis shows the highest API and therefore recommended for plantation in marble dust pollution stress area.
Khalifa, Ashraf Y.Z.; Alsyeeh, Abdel-Moneium; Almalki, Mohammed A.; Saleh, Farag A.
2015-01-01
The aim of the present study was to characterize the endophytic bacterial strain designated MSR1 that was isolated from inside the non-nodulating roots of Medicago sativa after surface-sterilization. MSR1 was identified as Enterobacter cloacae using both 16S rDNA gene sequence analysis and API20E biochemical identification system (Biomerieux, France). Furthermore, this bacterium was characterized using API50CH kit (Biomerieux, France) and tested for antibacterial activities against some food borne pathogens. The results showed that E. cloacae consumed certain carbohydrates such as glycerol, d-xylose, d-maltose and esculin melibiose as a sole carbon source and certain amino acids such as arginine, tryptophan ornithine as nitrogen source. Furthermore, MSR1 possessed multiple plant-growth promoting characteristics; phosphate solubility, production of phytohormones acetoin and bioactive compounds. Inoculation of Pisum sativum with MSR1 significantly improved the growth parameters (the length and dry weight) of this economically important grain legume compared to the non-treated plants. To our knowledge, this is the first report addressing E. cloacae which exist in roots of alfalfa growing in Al-Ahsaa region. The results confirmed that E. cloacae exhibited traits for plant growth promoting and could be developed as an eco-friendly biofertilizer for P. sativum and probably for other important plant species in future. PMID:26858542
FirebrowseR: an R client to the Broad Institute’s Firehose Pipeline
Deng, Mario; Brägelmann, Johannes; Kryukov, Ivan; Saraiva-Agostinho, Nuno; Perner, Sven
2017-01-01
With its Firebrowse service (http://firebrowse.org/) the Broad Institute is making large-scale multi-platform omics data analysis results publicly available through a Representational State Transfer (REST) Application Programmable Interface (API). Querying this database through an API client from an arbitrary programming environment is an essential task, allowing other developers and researchers to focus on their analysis and avoid data wrangling. Hence, as a first result, we developed a workflow to automatically generate, test and deploy such clients for rapid response to API changes. Its underlying infrastructure, a combination of free and publicly available web services, facilitates the development of API clients. It decouples changes in server software from the client software by reacting to changes in the RESTful service and removing direct dependencies on a specific implementation of an API. As a second result, FirebrowseR, an R client to the Broad Institute’s RESTful Firehose Pipeline, is provided as a working example, which is built by the means of the presented workflow. The package’s features are demonstrated by an example analysis of cancer gene expression data. Database URL: https://github.com/mariodeng/ PMID:28062517
NASA Astrophysics Data System (ADS)
Ward, K.
2015-12-01
Hidden within the terabytes of imagery in NASA's Global Imagery Browse Services (GIBS) collection are hundreds of daily natural events. Some events are newsworthy, devastating, and visibly obvious at a global scale, others are merely regional curiosities. Regardless of the scope and significance of any one event, it is likely that multiple GIBS layers can be viewed to provide a multispectral, dataset-based view of the event. To facilitate linking between the discrete event and the representative dataset imagery, NASA's Earth Observatory Group has developed a prototype application programming interface (API): the Earth Observatory Natural Event Tracker (EONET). EONET supports an API model that allows users to retrieve event-specific metadata--date/time, location, and type (wildfire, storm, etc.)--and web service layer-specific metadata which can be used to link to event-relevant dataset imagery in GIBS. GIBS' ability to ingest many near real time datasets, combined with its growing archive of past imagery, means that API users will be able to develop client applications that not only show ongoing events but can also look at imagery from before and after. In our poster, we will present the API and show examples of its use.
New forms of old drugs: improving without changing.
Domingos, Sofia; André, Vânia; Quaresma, Sílvia; Martins, Inês C B; Minas da Piedade, M Fátima; Duarte, Maria Teresa
2015-06-01
In a short approach, we want to present the improvements that have recently been done in the world of new solid forms of known active pharmaceutical ingredients (APIs). The different strategies will be addressed, and successful examples will be given. This overview presents a possible step to overcome the 10-15 years of hard work involved in launching a new drug in the market: the use of new forms of well-known APIs, and improve their efficiency by enhancing their bioavailability and pharmacokinetics. It discusses some of the latest progresses. We want to present, in a brief overview, what recently has been done to improve the discovery of innovative methods of using well-known APIs, and improve their efficiency. Multicomponent crystal forms have shown to be the most promising achievements to accomplish these aims, by altering API physico-chemical properties, such as solubility, thermal stability, shelf life, dissolution rate and compressibility. API-ionic liquids (ILs) and their advantages will be briefly referred. An outline of what has recently been achieved in metal drug coordination and in drug storage and delivery using bio-inspired metal-organic frameworks (BioMOFs) will also be addressed. © 2015 Royal Pharmaceutical Society.
The Spatial-Temporal Characteristics of Air Pollution in China from 2001–2014
Bao, Junzhe; Yang, Xiping; Zhao, Zhiyuan; Wang, Zhenkun; Yu, Chuanhua; Li, Xudong
2015-01-01
To provide some useful information about the control of air pollution in China, we studied the spatial-temporal characteristics of air pollution in China from 2001–2014. First, we drew several line charts and histograms of the Air Pollution Index (API) and Air Quality Index (AQI) of 31 capital cities and municipalities to research the distribution across different times and cities; then, we researched the spatial clustering of API and AQI; finally, we examined the shift of the gravity center of API and AQI in different years and months. The API values had a decreasing trend: the high values had a clustering trend in some northern cities, and the low values had a clustering trend in some southern cities. The AQI values were relatively low, from 15:00–17:00 during the day. The gravity center of API had a trend of moving south from 2001–2003, then fluctuated in an unordered pattern and moved north in the winter. The AQI gravity center did not have a regular shift during different months. In conclusion, the government should take action to mitigate air pollution in some typical cities, as well as air pollution during the winter. PMID:26694427
NASA Astrophysics Data System (ADS)
Lamy, L.; Henry, F.; Prangé, R.; Le Sidaner, P.
2015-10-01
The Auroral Planetary Imaging and Spectroscopy (APIS) service http://obspm.fr/apis/ provides an open and interactive access to processed auroral observations of the outer planets and their satellites. Such observations are of interest for a wide community at the interface between planetology, magnetospheric and heliospheric physics. APIS consists of (i) a high level database, built from planetary auroral observations acquired by the Hubble Space Telescope (HST) since 1997 with its mostly used Far-Ultraviolet spectro- imagers, (ii) a dedicated search interface aimed at browsing efficiently this database through relevant conditional search criteria (Figure 1) and (iii) the ability to interactively work with the data online through plotting tools developed by the Virtual Observatory (VO) community, such as Aladin and Specview. This service is VO compliant and can therefore also been queried by external search tools of the VO community. The diversity of available data and the capability to sort them out by relevant physical criteria shall in particular facilitate statistical studies, on long-term scales and/or multi-instrumental multispectral combined analysis [1,2]. We will present the updated capabilities of APIS with several examples. Several tutorials are available online.
Kameoka, Velma A.
2009-01-01
Objectives. We examined ethnic variations in high-risk sexual behaviors among Asian and Pacific Islander (API) adolescents in comparison with White adolescents. Methods. We obtained data from the 2003 Hawaii Youth Risk Behavior Survey on 4953 students in grades 9 through 12. We conducted χ2 and logistic regression analyses on these data to examine the prevalence of high-risk sexual behaviors among Japanese, Filipino, Native Hawaiian, and White adolescents. Results. We found significant ethnic variation in prevalence of high-risk sexual behaviors among API adolescents. Relative to White adolescents, Native Hawaiian adolescents were most likely to engage in lifetime sexual intercourse, recent sexual intercourse, and sexual initiation before age 13 years; Japanese adolescents were least likely to engage in these behaviors. Filipino adolescents were least likely to use substances before last sexual intercourse and condoms during last sexual intercourse. Conclusions. Our findings suggest divergent patterns of risk among API ethnic groups, underscoring the heterogeneity of API subgroups and emphasizing the need for health disparities research on disaggregated API ethnic groups. The findings of such research should be used to design ethnically relevant interventions aimed at mitigating the negative health consequences of high-risk sexual behaviors. PMID:19106424
Lillis, Paul G.
2004-01-01
Bulk oil composition is an important economic consideration of a petroleum resource assessment. Geological and geochemical interpretations from previous North Slope studies combined with recently acquired geochemical data are used to predict representative oil gravity (?API) and sulfur content (wt.% S) of the oil types for the 2002 U.S. Geological Survey resource assessment of the National Petroleum Reserve of Alaska (NPRA). The oil types are named after their respective source rock units and include Kuna-Lisburne, Shublik-Otuk, Kingak-Blankenship, and Pebble-GRZ-Torok. The composition of the oil (24?API, 1.6 wt.% S) in the South Barrow 12 well was selected as representative of Kuna-Lisburne oil. The average gravity and sulfur values (23?API and 1.6 wt.% S, respectively) of the Kuparuk field were selected to be representative of Shublik-Otuk oil type. The composition of the oil (39?API, 0.3 wt.% S) from the Alpine field discovery well (ARCO Bergschrund 1) was selected to be representative of Kingak-Blankenship oil. The oil composition (37?API, 0.1 wt.% S) of Tarn field was considered representative of the Pebble-GRZ-Torok oil type in NPRA.
Visser, J Carolina; Woerdenbag, Herman J; Crediet, Stefan; Gerrits, Edwin; Lesschen, Marjan A; Hinrichs, Wouter L J; Breitkreutz, Jörg; Frijlink, Henderik W
2015-01-15
Orodispersible films (ODFs) are promising drug delivery systems for customized small scale pharmacy preparations. The aim of the present study was to develop a versatile casting solution suitable for the extemporaneous production of ODFs to which active pharmaceutical ingredients (APIs) can be added. Different combinations of film forming agents and other excipients and different casting heights were tested for their suitability for production of ODFs. The best suitable casting solution contained hypromellose, carbomer, glycerol, disodium EDTA and trometamol. This casting solution was used to prepare ODFs containing water-soluble APIs (enalapril maleate and prednisolone disodium phosphate) and a poorly water-soluble API (diazepam) for which ethanol 96% was used as co-solvent.The water-soluble APIs as well as ethanol influenced the viscosity of the casting solution, mechanical properties and disintegration time of the ODFs. All ODFs containing API met the requirements on uniformity of mass and uniformity of content set by the European Pharmacopoeia (2014) (Ph. Eur.) 8th edition. In conclusion, ODFs of good pharmaceutical quality can be prepared on small scale. Hereby opening the perspective of using ODFs for individualized pharmacotherapy. Copyright © 2014 Elsevier B.V. All rights reserved.
FirebrowseR: an R client to the Broad Institute's Firehose Pipeline.
Deng, Mario; Brägelmann, Johannes; Kryukov, Ivan; Saraiva-Agostinho, Nuno; Perner, Sven
2017-01-01
With its Firebrowse service (http://firebrowse.org/) the Broad Institute is making large-scale multi-platform omics data analysis results publicly available through a Representational State Transfer (REST) Application Programmable Interface (API). Querying this database through an API client from an arbitrary programming environment is an essential task, allowing other developers and researchers to focus on their analysis and avoid data wrangling. Hence, as a first result, we developed a workflow to automatically generate, test and deploy such clients for rapid response to API changes. Its underlying infrastructure, a combination of free and publicly available web services, facilitates the development of API clients. It decouples changes in server software from the client software by reacting to changes in the RESTful service and removing direct dependencies on a specific implementation of an API. As a second result, FirebrowseR, an R client to the Broad Institute's RESTful Firehose Pipeline, is provided as a working example, which is built by the means of the presented workflow. The package's features are demonstrated by an example analysis of cancer gene expression data.Database URL: https://github.com/mariodeng/. © The Author(s) 2017. Published by Oxford University Press.
NASA Astrophysics Data System (ADS)
Rinehart, Matthew T.; LaCroix, Jeffrey; Henderson, Marcus; Katz, David; Wax, Adam
2011-03-01
The effectiveness of microbicidal gels, topical products developed to prevent infection by sexually transmitted diseases including HIV/AIDS, is governed by extent of gel coverage, pharmacokinetics of active pharmaceutical ingredients (APIs), and integrity of vaginal epithelium. While biopsies provide localized information about drug delivery and tissue structure, in vivo measurements are preferable in providing objective data on API and gel coating distribution as well as tissue integrity. We are developing a system combining confocal fluorescence microscopy with optical coherence tomography (OCT) to simultaneously measure local concentrations and diffusion coefficients of APIs during transport from microbicidal gels into tissue, while assessing tissue integrity. The confocal module acquires 2-D images of fluorescent APIs multiple times per second allowing analysis of lateral diffusion kinetics. The custom Fourier domain OCT module has a maximum a-scan rate of 54 kHz and provides depth-resolved tissue integrity information coregistered with the confocal fluorescence measurements. The combined system is validated by imaging phantoms with a surrogate fluorophore. Time-resolved API concentration measured at fixed depths is analyzed for diffusion kinetics. This multimodal system will eventually be implemented in vivo for objective evaluation of microbicide product performance.
30 CFR 250.1900 - Must I have a SEMS program?
Code of Federal Regulations, 2012 CFR
2012-07-01
... Environmental Management Program for Offshore Operations and Facilities (API RP 75) (as incorporated by... subpart and API RP 75 (as incorporated by reference in § 250.198), you must follow the requirements of...