Pipe Storage and Movement Study
1986-02-01
API 5L Points Higher Price Than API 5L Grades A or B Wall Range—X Grades X42 * X46* X52 * X60 X65 X70* * All Walls...thereof may be used at Mill Option for API 5L Grades X42, X46 and X52 unless specifically prohibited. * * DSAW only. NOTES: For Intermediate Grodes, apply...A53, BW, S 80, GALV 1-1/4", STL, A53, BW, S 80, GALV 2", STL, A53, BW, S 80, GALV 8", STL, API - 5L GR X-42, ERW, STD 3-1/2"OD, STL, API - 5L GR
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-23
...; API 5L Grades A & B....... Two--HSLA & HSLA-F Quality Grades: A572, A1011-HSLAS; A1018-HSLAS, A1011-HSLAS- $661.92 F; A1018-HSLAS-F; API 5L Gr. X42, X46, X52, X56, X60; API 5CT Grades J55 and K55 Three--High Grade Coils and Sheets for Pipes and Casings API 5L Gr. X65, X70, and X80 $770.24 Section III.E is...
Welding needs specified for X-80 offshore line pipe
DOE Office of Scientific and Technical Information (OSTI.GOV)
Price, J.C.
1993-12-20
High-quality, defect-free welds can be deposited in API Grade 5L X-80 line pipe with pulsed gas-metal-arc welding (GMAW) and shielded metal-arc welding (SMAW) processes. The newly developed Grade X-80 combines higher yield-strength pipe with thinner walls to reduce fabrication costs and improve some projects' economics. Use of X-80 pipe can yield as much as 7.5% cost savings over construction with X-65 steel. Increased demand of natural gas has prompted development of large gas fields which will require large-diameter pipelines at higher operating pressures. API 5L X-80 line pipe could, therefore, become commonplace by the end of the decade if weldingmore » technology can be developed to match mechanical properties without affecting productivity. The paper discusses large-diameter projects, welding processes, GMAW shielding gas, SMAW filler wires, hardness and weldability, toughness and corrosion resistance, economics, and what's been learned.« less
Investigation on size tolerance of pore defect of girth weld pipe.
Li, Yan; Shuai, Jian; Xu, Kui
2018-01-01
Welding quality control is an important parameter for safe operation of oil and gas pipes, especially for high-strength steel pipes. Size control of welding defect is a bottleneck problem for current pipe construction. As a key part of construction procedure for butt-welding of pipes, pore defects in girth weld is difficult to ignore. A three-dimensional non-linear finite element numerical model is established to study applicability of size control indices based on groove shape and softening phenomenon of material in heat-affected zone of practical pipe girth weld. Taking design criteria of pipe as the basis, basic tensile, extremely tensile and extremely compressive loading conditions are determined for pipe stress analysis, and failure criteria based on flow stress is employed to perform stress analysis for pipe girth weld with pore defect. Results show that pipe girth welding stresses of pores at various radial locations are similar. Whereas, stress for pores of different sharpness varied significantly. Besides, tolerance capability of API 5L X90 grade pipe to pore defect of girth weld is lower than that of API 5L X80 grade pipe, and size control index of 3 mm related to pore defect in current standards is applicable to API 5L X80 and X90 grade girth welded pipes with radially non-sharp pore defects.
Investigation on size tolerance of pore defect of girth weld pipe
Shuai, Jian; Xu, Kui
2018-01-01
Welding quality control is an important parameter for safe operation of oil and gas pipes, especially for high-strength steel pipes. Size control of welding defect is a bottleneck problem for current pipe construction. As a key part of construction procedure for butt-welding of pipes, pore defects in girth weld is difficult to ignore. A three-dimensional non-linear finite element numerical model is established to study applicability of size control indices based on groove shape and softening phenomenon of material in heat-affected zone of practical pipe girth weld. Taking design criteria of pipe as the basis, basic tensile, extremely tensile and extremely compressive loading conditions are determined for pipe stress analysis, and failure criteria based on flow stress is employed to perform stress analysis for pipe girth weld with pore defect. Results show that pipe girth welding stresses of pores at various radial locations are similar. Whereas, stress for pores of different sharpness varied significantly. Besides, tolerance capability of API 5L X90 grade pipe to pore defect of girth weld is lower than that of API 5L X80 grade pipe, and size control index of 3 mm related to pore defect in current standards is applicable to API 5L X80 and X90 grade girth welded pipes with radially non-sharp pore defects. PMID:29364986
Characterization of Mechanical Properties and Residual Stress in API 5L X80 Steel Welded Joints
NASA Astrophysics Data System (ADS)
de Sousa Lins, Amilton; de Souza, Luís Felipe Guimarães; Fonseca, Maria Cindra
2018-01-01
The use of high-strength and low-alloy steels, high design factors and increasingly stringent safety requirements have increased the operating pressure levels and, consequently, the need for further studies to avoid and prevent premature pipe failure. To evaluate the possibility of improving productivity in manual arc welding of this type of steel, this work characterizes the mechanical properties and residual stresses in API 5L X80 steel welded joints using the SMAW and FCAW processes. The residual stresses were analyzed using x-ray diffraction with the sin2 ψ method at the top and root of the welded joints in the longitudinal and transverse directions of the weld bead. The mechanical properties of the welded joints by both processes were characterized in terms of tensile strength, impact toughness and Vickers microhardness in the welded and shot peening conditions. A predominantly compressive residual stress was found, and shot peening increased the tensile strength and impact toughness in both welded joints.
75 FR 37874 - Buy America Waiver Notification
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-30
... steel tubing API 5L, grade X52-PSLI, for construction of Federal-aid project IM-HPP-080-5(086) in New... is appropriate to use non- domestic Steel tubing, APL 5L, grade X52-PSLI, in New Jersey State. In... review to locate potential domestic manufacturers for the steel tubing, APL 5L, grade X52-PSLI. Based on...
NASA Astrophysics Data System (ADS)
Masoumi, Mohammad; Echeverri, Edwan Anderson Ariza; Silva, Cleiton Carvalho; Béreš, Miloslav; de Abreu, Hamilton Ferreira Gomes
2018-03-01
A commercial API 5L X70 steel plate was subjected to different thermomechanical processes to propose a novel thermomechanical rolling path to achieve improved mechanical properties. Scanning electron microscopy, electron backscatter diffraction, and x-ray texture analysis were employed for microstructural characterization. The results showed that strain-free recrystallized {001} ferrite grains that developed at higher rolling temperature could not meet the American Petroleum Institute (API) requirements. Also, refined and work-hardened grains that have formed in the intercritical region with high stored energy do not provide suitable tensile properties. However, fine martensite-austenite constituents dispersed in ferrite matrix with grains having predominantly {111} and {110} orientations parallel to the normal direction that developed under isothermal rolling at 850 °C provided an outstanding combination of tensile strength and ductility.
Long-Term Corrosion Fatigue of Welded Marine Steels.
1984-01-01
MPa ksi MPa I C API 5L Grade B 35 240 60 min. 415 mrin. ASTM A53 Grade B 35 240 60 min. 415 min. ASTM A135 Grade B 35 240 60 min. 415 min. ASTM A139...2% max. cold expansion 42 290 60 min. 415 min. API 5LX Grade X52 2% max. cold expansion 52 360 66 min. 455 min. ASTM AS00 Grade B 42-46 290-320 58 mi...Environments 3.38 " 3.5 Influence of Load Ratio on the Corrosion Fatigue Crack Growth Rates in API X-70 Linepipe Steel in 3.5% NaCl (From (3.30]) 3.39 3.6
Sherif, El-Sayed M
2014-07-09
In this work, the results obtained from studying the anodic dissolution of pure iron and API X-65 5L pipeline steel after 40 min and 12 h exposure period in 4.0 wt % NaCl solutions at room temperature were reported. Potential-time, electrochemical impedance spectroscopy, potentiodynamic polarization, and chronoamperometric current-time at constant potential techniques were employed. It has been found that the iron electrode corrodes in the chloride test solutions faster than the API X-65 5L steel does under the same conditions. Increasing the exposure period for the electrodes from 40 min to 12 h showed a significant reduction in the corrosion parameters for both iron and steel in the 4.0 wt % NaCl solution. Results together confirmed clearly that the X-65 steel is superior to iron against corrosion in sodium chloride solutions.
Bluhm, Martina E. C.; Schneider, Viktoria A. F.; Schäfer, Ingo; Piantavigna, Stefania; Goldbach, Tina; Knappe, Daniel; Seibel, Peter; Martin, Lisandra L.; Veldhuizen, Edwin J. A.; Hoffmann, Ralf
2016-01-01
The Gram-negative bacterium Pseudomonas aeruginosa is a life-threatening nosocomial pathogen due to its generally low susceptibility toward antibiotics. Furthermore, many strains have acquired resistance mechanisms requiring new antimicrobials with novel mechanisms to enhance treatment options. Proline-rich antimicrobial peptides, such as the apidaecin analog Api137, are highly efficient against various Enterobacteriaceae infections in mice, but less active against P. aeruginosa in vitro. Here, we extended our recent work by optimizing lead peptides Api755 (gu-OIORPVYOPRPRPPHPRL-OH; gu = N,N,N′,N′-tetramethylguanidino, O = L-ornithine) and Api760 (gu-OWORPVYOPRPRPPHPRL-OH) by incorporation of Ile-Orn- and Trp-Orn-motifs, respectively. Api795 (gu-O(IO)2RPVYOPRPRPPHPRL-OH) and Api794 (gu-O(WO)3RPVYOPRPRPPHPRL-OH) were highly active against P. aeruginosa with minimal inhibitory concentrations of 8–16 and 8–32 μg/mL against Escherichia coli and Klebsiella pneumoniae. Assessed using a quartz crystal microbalance, these peptides inserted into a membrane layer and the surface activity increased gradually from Api137, over Api795, to Api794. This mode of action was confirmed by transmission electron microscopy indicating some membrane damage only at the high peptide concentrations. Api794 and Api795 were highly stable against serum proteases (half-life times >5 h) and non-hemolytic to human erythrocytes at peptide concentrations of 0.6 g/L. At this concentration, Api795 reduced the cell viability of HeLa cells only slightly, whereas the IC50 of Api794 was 0.23 ± 0.09 g/L. Confocal fluorescence microscopy revealed no colocalization of 5(6)-carboxyfluorescein-labeled Api794 or Api795 with the mitochondria, excluding interactions with the mitochondrial membrane. Interestingly, Api795 was localized in endosomes, whereas Api794 was present in endosomes and the cytosol. This was verified using flow cytometry showing a 50% higher uptake of Api794 in HeLa cells compared with Api795. The uptake was reduced for both peptides by 50 and 80%, respectively, after inhibiting endocytotic uptake with dynasore. In summary, Api794 and Api795 were highly active against P. aeruginosa in vitro. Both peptides passed across the bacterial membrane efficiently, most likely then disturbing the ribosome assembly, and resulting in further intracellular damage. Api795 with its IOIO-motif, which was particularly active and only slightly toxic in vitro, appears to represent a promising third generation lead compound for the development of novel antibiotics against P. aeruginosa. PMID:27243004
Microstructural Evolution of HSLA ISO 3183 X80M (API 5L X80) Friction Stir Welded Joints
NASA Astrophysics Data System (ADS)
Hermenegildo, Tahiana F. C.; Santos, Tiago F. A.; Torres, Edwar A.; Afonso, Conrado R. M.; Ramirez, Antonio J.
2018-03-01
Evaluation was made of friction stir welded joints, identifying conditions that resulted in satisfactory welded joints free from defects and with microstructural characteristics that provided good mechanical properties. Microstructural characterization and cooling curve analysis of the joints with lower and higher heat inputs evidenced deformation below and above the non-recrystallization temperature (Tnr) and dynamic recrystallization during microstructural evolution. Microscopy analyses showed acicular ferrite, bainitic ferrite, and coalesced bainite microstructures in the stir zone of the cold weld (lower heat input), while the stir zone of the hot weld (higher heat input) contained bainitic ferrite, acicular ferrite, coalesced bainite, martensite, and dispersed carbides. Granular bainite and dispersed carbides were observed in all the heat affected zones. Analysis of the microstructural transformations, together with the thermal history of the joints, showed that the variable that had the greatest influence on the morphology of the bainite (granular bainite/bainitic ferrite) was the deformation temperature.
Determination of sorption of seventy-five pharmaceuticals in sewage sludge.
Hörsing, Maritha; Ledin, Anna; Grabic, Roman; Fick, Jerker; Tysklind, Mats; la Cour Jansen, Jes; Andersen, Henrik R
2011-10-01
Sorption of 75 active pharmaceutical ingredients (APIs) to three different types of sludge (primary sludge, secondary sludge with short and long sludge age respectively) were investigated. To obtain the sorption isotherms batch studies with the APIs mixture were performed in four nominal concentrations to water containing 1 g of sludge. The range of APIs concentrations was between ng L(-1) to μg L(-1) which are found in the wastewater effluents. Isotherms were obtained for approximately 45 of the APIs, providing distribution coefficients for linear (Kd), Freundlich (Kf) and Langmuir (KL) isotherms. Kd, Kf and KL ranging between 7.1×10(4) and 3.8×10(7), 1.1×10(-2) and 6.1×10(4) and 9.2×10(-3) and 1.1 L kg(-1), respectively. The obtained coefficients were applied to estimate the fraction of APIs in the water phase (see Abstract Graphic). For 37 of the 75 APIs, the predicted presence in the liquid phase was estimated to >80%. 24 APIs were estimated to be present in the liquid phase between 20 and 80%, and 14 APIs were found to have <20% presence in the liquid phase, i.e. high affinity towards sludge. Furthermore, the effect of pH at values 6, 7 and 8 was evaluated using one way ANOVA-test. A significant difference in Kds due to pH changes were found for 6 of the APIs (variation 10-20%). Copyright © 2011 Elsevier Ltd. All rights reserved.
Very-High Level Concurrent Programming.
1984-12-01
8217 O-. ----------- !NODE NAME !DIMENSION NO. ASSERTjiON( 5l ): AASS 1 0 I AAS. IV LMrGA I V, ’*ANAME(FNJ RECIPELI. *r..-NAME: INTFOEI.) i’IV P~jflC.l...RECORD, 4 PROCID FLO (CHAR 10i, 1* MAIL ADDRESS * 4 ;M$2),PX$, X$2L,LIS- APY ,LISAY.UjSAR) ARE FLD ’DEC FLOAT( 15)): END. UlSARC (TI =T= I MYPD: 1 .0P FILE...LAO THEN X51(T) - (X111(T) + 151(T) + X11’(T) + XS14(T)+XW1(T)+516(T)) ELSE TS...EATA($,. 7): Y527(T) IF F;,LAOi THEN X52 (T) - (1521(T) + Y$5&2(TI
Mechanical Characteristics of Submerged Arc Weldment in API Gas Pipeline Steel of Grade X65
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hashemi, S. H.; Mohammadyani, D.
The mechanical properties of submerged arc weldment (SAW) in gas transportation pipeline steel of grade API X65 (65 ksi yield strength) were investigated. This steel is produced by thermo mechanical control rolled (TMC), and is largely used in Iran gas piping systems and networks. The results from laboratory study on three different regions; i.e. base metal (BM), fusion zone (FZ) and heat affected zone (HAZ) were used to compare weldment mechanical characteristics with those specified by API 5L (revision 2004) standard code. Different laboratory experiments were conducted on test specimens taken from 48 inch outside diameter and 14.3 mm wallmore » thickness gas pipeline. The test results showed a gradient of microstructure and Vickers hardness data from the centerline of FZ towards the unaffected MB. Similarly, lower Charpy absorbed energy (compared to BM) was observed in the FZ impact specimens. Despite this, the API specifications were fulfilled in three tested zones, ensuring pipeline structural integrity under working conditions.« less
1988-08-01
5l "x1Ol’x14" 7597*/ 2C8 0.1160 Portable 8’X8’xS’ 512 0.698 0.0109 Primer mag. 14’z12’r7* 1260 27.5...8217x26x10’ 162q8 118.0 0.1835 Richoond 61"x26"x1O’ 1625 48.0 0.C747 Rectangular 220’ x52 ’x12’ 137280 473.0 0.1777 Pine Bluff Igloo 60’z26*x12...T ": a a £ a . i e p * *l S807 HrY $wo ft~o t" i * *-* guMt’ *s too ,~y IFIGURE 2 -MA.’N RANGE - API , MO 808 .Qr. 3 U t.6 II 41s 3* w
NASA Astrophysics Data System (ADS)
Avila, Julian A.; Lucon, Enrico; Sowards, Jeffrey; Mei, Paulo Roberto; Ramirez, Antonio J.
2016-06-01
Friction-stir welding (FSW) is an alternative welding process for pipelines. This technology offers sound welds, good repeatability, and excellent mechanical properties. However, it is of paramount importance to determine the toughness of the welds at low temperatures in order to establish the limits of this technology. Ductile-to-brittle transition curves were generated in the present study by using a small-scale instrumented Charpy machine and miniaturized V-notch specimens (Kleinstprobe, KLST); notches were located in base metal, heat-affected, stirred, and hard zones within a FSW joint of API-5L X80 Pipeline Steel. Specimens were tested at temperatures between 77 K (-196 °C) and 298 K (25 °C). Based on the results obtained, the transition temperatures for the base material and heat-affected zone were below 173 K (-100 °C); conversely, for the stirred and hard zones, it was located around 213 K (-60 °C). Fracture surfaces were characterized and showed a ductile fracture mechanism at high impact energies and a mixture of ductile and brittle mechanisms at low impact energies.
49 CFR 195.106 - Internal design pressure.
Code of Federal Regulations, 2013 CFR
2013-10-01
... temperature higher than 900 °F (482 °C) for any period of time or over 600 °F (316 °C) for more than 1 hour... 1.00 Electric resistance welded 1.00 Furnace lap welded 0.80 Furnace butt welded 0.60 ASTM A106... 1.00 API 5L Seamless 1.00 Electric resistance welded 1.00 Electric flash welded 1.00 Submerged arc...
2013-01-01
Background Alpha-1 proteinase inhibitor (API) is a plasma serpin superfamily member that inhibits neutrophil elastase; variant API M358R inhibits thrombin and activated protein C (APC). Fusing residues 1-75 of another serpin, heparin cofactor II (HCII), to API M358R (in HAPI M358R) was previously shown to accelerate thrombin inhibition over API M358R by conferring thrombin exosite 1 binding properties. We hypothesized that replacing HCII 1-75 region with the 13 C-terminal residues (triskaidecapeptide) of hirudin variant 3 (HV354-66) would further enhance the inhibitory potency of API M358R fusion proteins. We therefore expressed HV3API M358R (HV354-66 fused to API M358R) and HV3API RCL5 (HV354-66 fused to API F352A/L353V/E354V/A355I/I356A/I460L/M358R) API M358R) as N-terminally hexahistidine-tagged polypeptides in E. coli. Results HV3API M358R inhibited thrombin 3.3-fold more rapidly than API M358R; for HV3API RCL5 the rate enhancement was 1.9-fold versus API RCL5; neither protein inhibited thrombin as rapidly as HAPI M358R. While the thrombin/Activated Protein C rate constant ratio was 77-fold higher for HV3API RCL5 than for HV3API M358R, most of the increased specificity derived from the API F352A/L353V/E354V/A355I/I356A/I460L API RCL 5 mutations, since API RCL5 remained 3-fold more specific than HV3API RCL5. An HV3 54-66 peptide doubled the Thrombin Clotting Time (TCT) and halved the binding of thrombin to immobilized HCII 1-75 at lower concentrations than free HCII 1-75. HV3API RCL5 bound active site-inhibited FPR-chloromethyl ketone-thrombin more effectively than HAPI RCL5. Transferring the position of the fused HV3 triskaidecapeptide to the C-terminus of API M358R decreased the rate of thrombin inhibition relative to that mediated by HV3API M358R by 11-to 14-fold. Conclusions Fusing the C-terminal triskaidecapeptide of HV3 to API M358R-containing serpins significantly increased their effectiveness as thrombin inhibitors, but the enhancement was less than that seen in HCII 1-75–API M358R fusion proteins. HCII 1-75 was a superior fusion partner, in spite of the greater affinity of the HV3 triskaidecapeptide, manifested both in isolated and API-fused form, for thrombin exosite 1. Our results suggest that HCII 1-75 binds thrombin exosite 1 and orients the attached serpin scaffold for more efficient interaction with the active site of thrombin than the HV3 triskaidecapeptide. PMID:24215622
Song, Min; Qian, Wen; Hang, Tai-Jun; Zhang, Zheng-Xing
2005-10-01
To establish a sensitive and accurate method to study the pharmacokinetics of (-)-clausenamide [(-)-clau] and its major metabolite 6-hydroxyl-clausenamide (6-OH-clau) in the plasma of the Beagle dog. (-)-Clau was orally administered to six Beagle dogs at the dose of 30 mg x kg(-1), venous blood from front leg was sampled and plasma was separated for analysis. After extraction with ethyl acetate, the plasma samples were analyzed by HPLC/MS and the mobile phase was a mixture of methanol-water-acetic acid (60: 40: 0. 8) at the flow rate of 1.0 mL x min(-1). The API-ES positive ion SIM detection was carried out for the detection of both (-)-clau ([M + H] (+), m/z 298 ) and 6-OH-clau ([M + H - H2 O](+), m/z 296) with glipzide (glip) ([M + H](+), m/z 446) as internal standard. The pharmacokinetic parameters were calculated by 3P97 software. There was good linear relationship ( r > 0. 999) between the SIM responses and the concentrations for (-)-clau and 6-OH-clau at the range from 1.0 to 200 ng x mL(-1) and 0.2 to 40.0 ng x mL(-1), respectively. The absolute recovery was greater than 85%. The plasma concentration-time curves of (-)-clau and 6-OH-clau were both best fitted to a two-compartment model. The C(max) of (-)-clau and 6-OH-clau were (21 +/- 10) ng x mL(-1) and (3.9 +/- 2.2) ng x mL(-1), T(max) were (0.8 +/- 0.5) h and (1.3 +/- 0.5) h, T 1/2 alpha were (0.9 +/- 0.6) hand (1.4 +/- 0.6) h, T 1/2 beta were (19 +/- 23) hand (13 +/- 12) h, AUC(0-24 h) were (69 +/- 14) h x ng x mL(-1) and (12 +/- 7) h x ng x mL(-1) respectively. The established HPLC/MS method was sensitive and specific for the determination of (-)-clau. It was shown that the absorption and first phase elimination of (-)-clau were very quick in Beagle dogs, but the terminal elimination was very slow. The plasma concentration profile of its major metabolite 6-OH-clau was similar to (-)-clau and the AUC was relatively small in comparison with (-)-clau.
2010-06-01
fruitfly Drosophila melanogaster and the honey bee Apis mellifera . Prog Neurobiol 80:1–19. 28. Larkin MA, et al. (2007) Clustal W and Clustal X version...receptors predicted or annotated in the Acyrthosiphon pisum, Pediculus humanus corporis, andApis mellifera genomes. The CAPA-related peptides in insects...prolixus CAPA Receptor Gene. CAPA receptor protein sequences identified or predicted in D. melanogaster (AAS65092) (13, 14), A. mellifera (NP_001091702
VIPS: A Visual Imagery and Perception System; the Result of a Protocol Analysis. Volume 2
1974-05-01
note the difference between subject and program descriptions and renresentat.ons of this appendix and the previous appendix API , This is a (me eia...Figure 11.11.7(c) i R 0 c 1 k c Ik V U T f^ t * 2. 2. Z KOX * H S ool * i X ToU ♦ 5L X Tot.\\ * 1 » ToUK ♦ Z 2. •Vot^T. ♦ 1 1 TOLL...VSPEC (UO DP, SPEC TE TYPE VEPTEX),P.9 K~ 3 ft55 X5fl A53 X52 Aol) ) i7(CR E38 VSPEC DIAGONAL TYPE SIDE)...) .n[rnQirrT, . ilOIVAS A3a V2.5 A15
Ferreira, Anderson O; Polonini, Hudson C; Silva, Sharlene L; Patrício, Fernando B; Brandão, Marcos Antônio F; Raposo, Nádia R B
2016-01-25
The objective of this study was to evaluate the feasibility of 10 commonly used active pharmaceutical ingredients (APIs) compounded in oral suspensions using an internationally used suspending vehicle (SyrSpend(®) SF PH4 liquid): (i) amlodipine, (as besylate) 1.0mg/mL; (ii) chloroquine phosphate,15.0 mg/mL; (iii) dapsone, 2.0 mg/mL; (iv) phenytoin, 15.0 mg/mL; (v) pyridoxine hydrochloride, 50.0 mg/mL; (vi) sulfadiazine, 100.0 mg/mL; (vii) sulfasalazine, 100.0 mg/mL; (viii) tetracycline hydrochloride, 25.0 mg/mL; (ix) trimethoprim, 10.0 mg/mL; and (x) zonisamide, 10.0 mg/mL. All suspensions were stored both at controlled refrigeration (2-8 °C) and controlled room temperature (20-25 °C). Feasibility was assessed by measuring the percent recovery at varying time points throughout a 90-day period. API quantification was performed by high-performance liquid chromatography (HPLC-UV), via a stability-indicating method. Given the percentage of recovery of the APIs within the suspensions, the expiration date of the final products (API+vehicle) was at least 90 days for all suspensions with regard to both the controlled temperatures. This suggests that the vehicle is stable for compounding APIs from different pharmacological classes. Copyright © 2015 Elsevier B.V. All rights reserved.
Piezoelectric and Electrostrictive Materials for Transducer Applications. Volume 1
1991-01-31
compo sition No. i, 24.S kV/cm oaxmposition No. 12 and 29 kV/cm ofomposi. sitsm No. 4. tia No. 4. 62 J. ApI . P M., Vol. 6,, No. 12. 15 Oecenulm ItOU Pan...symmetry Pm3m is I I: G 1 = 3Xo(T-To)P32 + P34 + P36 + 13032 + v034 +0P32032 - 1/2sll(X12+X22+X32)- S12(XIX 2+X2X 3+X3XI) - 1/2s44(X4 2 + X52 + X62) - (Qi 1...Piewitt, Acta Cryst. B25, 925 (1969). FIG. 7. Inhomogeneous order in a PST ceramic grain. 5L . E. Cross, Ferroelectrics 76, 241-267 (1987). J. Mater
Ren, Ke; Zhang, Wei; Shi, Yujun; Gong, Jianping
2010-06-01
Pim-2 is proved to be relevant to the tumorigenesis of hepatocellular carcinoma (HCC), but the mechanism is unclear. We studied the relationship among Pim-2, NF-kappaB and API-5. In our experiment, expression level of the three factors and phosphorylation level of API-5, as well as NF-kappaB activity, were detected in HCC tissues and the nontumorous controls. Then Pim-2 gene was transfected into nontumorous liver cells L02, and Pim-2 SiRNA was transfected into hepatoblastoma cell line HepG2. Parthenolide was added as NF-kappaB inhibitor. The same detections as above were repeated in the cells, along with the apoptosis analysis. We found the levels of Pim-2, NF-kappaB and API-5, as well as NF-kappaB activity, were significantly higher in HCC tissues. Pim-2 level was increased in L02 cells after the transfection of Pim-2 gene, but decreased in HepG2 cells after the transfection of Pim-2 SiRNA. The levels of NF-kappaB and API-5, as well as NF-kappaB activity and API-5 phosphorylation level, were in accordance with Pim-2 level, but could be reversed by Parthenolide. Cell apoptosis rates were negatively correlated with API-5 phosphorylation level. Therefore, we infer that Pim-2 could activate API-5 to inhibit the apoptosis of liver cells, and NF-kappaB is the key regulator.
NASA Astrophysics Data System (ADS)
Yin, Q. H.; Zhu, D. M.; Yang, D. Z.; Hu, Q. F.; Yang, Y. L.
2018-01-01
Clutaraldehyde cross-linked magnetic chitosan nanoparticles were synthesized and used as an adsorbent for the dispersive solid-phase extraction of palladium in active pharmaceutical ingredients (APIs) prior to analysis by a flame atomic absorption spectrophotometer. FT-IR, X-ray diffraction, and TEM were used to characterize the adsorbent. Various parameters of experimental performance, such as adsorbent amount, pH, adsorption time, desorption solutions, coexisting ions, and adsorbent reusability, were investigated and optimized. Under the optimized conditions, good linearity was achieved in the 5.0-500 μg/L concentration range, with correlation coefficients of 0.9989. The limit of detection is 2.8 μg/L and the recoveries of spiked samples ranged from 91.7 to 97.6%. It was confirmed that the GMCNs nanocomposite was a promising adsorbing material for extraction and preconcentration of Pd in APIs.
NASA Astrophysics Data System (ADS)
Shin, Sang Yong
2013-06-01
The effects of microstructure on tensile, Charpy impact, and crack tip opening displacement (CTOD) properties of two API X80 pipeline steels were investigated in this study. Two API X80 pipeline steels consisting of acicular ferrite and granular bainite, and a small amount of hard phases such as martensite and secondary phases have elongated grains along the rolling direction, so that they show different mechanical properties as the specimens' directions change. The 90 deg specimens have high tensile strength due to the low stress concentration on the fine hard phases and the high loads for the deformation of the elongated grains. In contrast, the 30 deg specimens have less elongated grains and larger hard phases such as martensite, with the size of about 3 μm, than the 90 deg specimens. Hence, the 30 deg specimens have low tensile strength because of the high stress concentration on the large hard phases and the low loads to deform grains. In the 90 deg specimen, brittle crack propagation surfaces are even since cracks propagate in a straight line along the elongated grain structure. In the 30 deg specimen, however, brittle crack propagation surfaces are uneven, and secondary cracks are observed, because of the zigzag brittle crack propagation path. In the CTOD properties, the 90 deg specimens have maximum forces of higher magnitude than the 30 deg specimens, because of the elongated grain structure. However, CTODs of the 90 deg specimens are lower than those of the 30 deg specimens because of the low plastic deformation areas by the elongated grains in the 90 deg specimens.
NASA Astrophysics Data System (ADS)
Miao, Jian; Wang, Qiang
2016-09-01
Multipurpose pipeline is often seriously corroded during its service life, and the phenomenon is more prominent once the transportation medium is changed. Electrochemical polarization curves and impedance spectroscopy of the API 5L Gr. X60 steel pipeline's corrosion process in sedimentary water with different ion types and their concentrations have been studied in this work. The results showed that the corrosion rates were found to be 0.00418 and 0.00232 mm/a for pure water and crude oil, respectively. However, for the mixtures of water and crude oil (with water content increased from 0.2 vol% to 10 vol%), the corrosion rate increased consistently and reached a maximum value of 0.15557 mm/a for 10 vol% water in crude oil. The effect of the concentration of various ions, namely, chloride, bicarbonate and sulfate in (oil/water) mixtures on the corrosion rate was characterized by weight-loss method. The results showed that with increasing the ions' concentrations, the corresponding exchange current density increased significantly. The results were further supported by the observations of corrosion morphology using scanning electron microscopy and are helpful in devising guidelines which would help in reducing corrosion in multipurpose transport pipelines involving a change of transported medium during their service life.
Cheema, M; Hristov, A N; Harte, F M
2017-11-01
Casein proteins (α S1 -, α S2 -, β- and κ-casein) account for 80% of the total protein content in bovine milk and form casein micelles (average diameter = 130 nm, approximately 10 15 micelles/mL). The affinity of native casein micelles with the 3 hydrophobic active pharmaceutical ingredients (API), meloxicam [351.4 g/mol; log P = 3.43; acid dissociation constant (pK a ) = 4.08], flunixin (296.2 g/mol; log P = 4.1; pK a = 5.82), and thiabendazole (201.2 g/mol; log P = 2.92; pK a = 4.64), was evaluated in bovine milk collected from dosed Holstein cows. Native casein micelles were separated from raw bovine milk by mild techniques such as ultracentrifugation, diafiltration, isoelectric point precipitation (pH 4.6), and size exclusion chromatography. Acetonitrile extraction of hydrophobic API was then done, followed by quantification using HPLC-UV. For the API or metabolites meloxicam, 5-hyroxy flunixin and 5-hydroxy thiabendazole, 31 ± 3.90, 31 ± 1.3, and 28 ± 0.5% of the content in milk was associated with casein micelles, respectively. Less than ∼5.0% of the recovered hydrophobic API were found in the milk fat fraction, and the remaining ∼65% were associated with the whey/serum fraction. A separate in vitro study showed that 66 ± 6.4% of meloxicam, 29 ± 0.58% of flunixin, 34 ± 0.21% of the metabolite 5-hyroxy flunixin, 50 ± 4.5% of thiabendazole, and 33 ± 3.8% of metabolite 5-hydroxy thiabendazole was found partitioned into casein micelles. Our study supports the hypothesis that casein micelles are native carriers for hydrophobic compounds in bovine milk. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2014 CFR
2014-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2013 CFR
2013-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2012 CFR
2012-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
49 CFR 192.65 - Transportation of pipe.
Code of Federal Regulations, 2011 CFR
2011-10-01
... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...
Bacteriocin production by Pediococcus pentosaceus isolated from marula (Scerocarya birrea).
Todorov, Svetoslav D; Dicks, Leon M T
2009-06-30
Strain ST44AM, isolated from marula, was identified as Pediococcus pentosaceus based on biochemical tests, sugar fermentation reactions (API 50CHL), PCR with species-specific primers and 16S rDNA sequencing. Strain ST44AM produces a 6.5 kDa class IIa bacteriocin, active against lactic acid bacteria, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, Listeria innocua, Listeria ivanovii subsp. ivanovii and Listeria monocytogenes. The peptide is inactivated by proteolytic enzymes, but not when treated with alpha-amylase, Triton X-100, Triton X-114, SDS, Tween 20, Tween 80, urea, NaCl and EDTA. No change in activity was recorded after 2 h at pH values between 2.0 and 12.0, and after treatment at 100 degrees C for 120 min or 121 degrees C for 20 min. The mode of activity against L. ivanovii susbp. ivanovii ATCC19119 and Enterococcus faecium HKLHS is bactericidal, resulting in cell lyses and enzyme- and DNA-leakage. No significant differences in cell growth and bacteriocin production were observed when strain ST44AM was cultured in MRS broth at 26 degrees C, 30 degrees C and 37 degrees C for 24 h and tested against the same target strain. L. ivanovii subsp. ivanovii ATCC 19119 and E. faecium HKLHS did, however, differ in sensitivity to bacteriocin ST44AM (3.3x10(6) AU/mL and 2.6x10(4) AU/mL, respectively). Peptide ST44AM adsorbs at high levels (1600 AU/mL) to producer cells. Bacteriocin ST44AM may be a derivative of pediocin PA-1. This is the first report on the presence of P. pentosaceus in marula and a pediocin PA-1 derivative produced by this species. We are also the first to report on the synergetic effect ciprofloxacin has on a pediocin-like bacteriocin.
Yu, Linsheng; Zou, Yunding; Bi, Shoudong; Wu, Houzhang; Cao, Yifeng
2006-08-01
In 2002 to approximately 2004, an investigation was made on the bee population dynamics and its relationships with the ecological environment in four ecological regions of Anhui Province. The results indicated that in the mountainous areas of south and west Anhui, there were 46 and 37 species of nectariferous plants, and the distribution density of Apis cerena cerena population was 2.01 and 1.95 colony x km(-2), respectively. In Jianghuai area and Huaibei plain, there were 17 and 12 species of nectariferous plants, which had concentrated and short flowering period and fitted for Apis mellifera Ligustica oysterring and producing, and the distribution density of Apis cerena cerena population was 0. 06 and 0. 02 colony x km(-2), respectively. Bee population fluctuation and distribution was affected by wasp predation. The breeding proportion of Apis cerena cerena to local apis population was 41.5%, 36.8%, 3.1% and 1.1%, and that of Apis mellifera Ligustica was 58.5%, 63.2%, 96.9% and 98.9% in the mountainous areas of south and west Anhui, Jianghuai area, and Huaibei plain, respectively.
49 CFR 195.207 - Transportation of pipe.
Code of Federal Regulations, 2014 CFR
2014-10-01
... in accordance with API Recommended Practice 5L1 (incorporated by reference, see § 195.3). (b) Ship or... with API Recommended Practice 5LW (incorporated by reference, see § 195.3). [ Amdt. 195-94, 75 FR 48606...
49 CFR 195.207 - Transportation of pipe.
Code of Federal Regulations, 2013 CFR
2013-10-01
... in accordance with API Recommended Practice 5L1 (incorporated by reference, see § 195.3). (b) Ship or... with API Recommended Practice 5LW (incorporated by reference, see § 195.3). [ Amdt. 195-94, 75 FR 48606...
Three pharmaceuticals cocrystals of adefovir: Syntheses, structures and dissolution study
NASA Astrophysics Data System (ADS)
Zhang, Xiaoming; Sun, Fuxing; Zhang, Tingting; Jia, Jiangtao; Su, Hongmin; Wang, Chenhui; Zhu, Guangshan
2015-11-01
We report here three novel cocrystals, which are composed of adefovir as the API (Active Pharmaceutical Ingredient) with p-aminobenzoic acid (1, 2C8H12N5O4P·C7H6NO2·3H2O), 3,5-dihydroxybenzoic acid (2, C8H12N5O4P·C7H6O4·H2O) and 2,6-pyridinedicarboxlic acid (3, C8H12N5O4P·C7H5NO4) as CCFs (cocrystal formers) respectively by crystal engineering strategy. Their structures were characterized by single crystal X-ray diffraction, powder X-ray diffraction (PXRD) analysis, thermogravimetric analyses (TGA), elemental analysis (EA) and infrared spectral analysis (IR). The analysis of single crystal X-ray diffraction demonstrate that cocrystal 1 and 2 form a strong hydrogen-bonded assembly through the phosphoric acids of API with water in the lattice and carboxylic acids of CCF respectively. Cocrystal 3 is formed in which the phosphoric acid groups of API are also held by the carboxylic acid groups of CCF. The PXRD results indicate their high purity of as-synthesized samples. The TGA, EA, IR and dissolution study of API and the cocrystals were also measured and discussed.
Solid State Clipper Diodes for High Power Modulators.
1978-11-01
modeled at low powers and later confirmed in actua l P W pulsar operation. 0~ \\ ~~~~~~~~~ . ~~~~~ .. . .— - - I. ~~~~~ 3 J~ItV~ . \\ W \\_ UNC l ASSIFIE...and CG is the di ide api-i tance to 1avg — Ip ~ j- ground . In our design the worst case diode leakage (I 2( lO ~C) was 15 milliamperes (mA) at I kV...without it. I2rms 1p 2 ~~ ( 4) the diode junction capacitance and stray l’nns — 5 x lO ~ A 2 capacitance affect the voltage division whenever the
Obot, I B; Onyeachu, Ikenna B; Kumar, A Madhan
2017-12-15
Sodium alginate (SA), a polysaccharide biopolymer, has been studied as an effective inhibitor against the corrosion of API X60 steel in neutral 3.5% NaCl using gravimetric and electrochemical techniques (OCP, EIS and EFM). The inhibition efficiency of the SA increased with concentration but was lower at higher temperature (70°C). Electrochemical measurements showed that the SA shifted the steel corrosion potential to more positive value and reduced the kinetics of corrosion by forming an adsorbed layer which mitigated the steel surface wetting, based on contact angle measurement. SEM-EDAX was used to confirm the inhibition of SA on API X60 steel surfaces. The SA adsorbs on the steel surface through a physisorption mechanism using its carboxylate oxygen according to UV-vis and ATR-IR measurements, respectively. This phenomena result in decreased localized pitting corrosion of the API X60 steel in 3.5% NaCl solution. Theoretical results using quantum chemical calculations and Monte Carlo simulations provide further atomic level insights into the interaction of SA with steel surface. Copyright © 2017 Elsevier Ltd. All rights reserved.
Wu, Fei; Zhang, Kai-Qiang; Bai, Bo; Wang, Hong-Lun; Suo, You-Rui
2015-02-01
In this work, the adsorption potential of TiO2@ yeast composite microspheres to remove Fluorescent Whitening Agent-VBL (FWA-VBL) from aqueous solution was investigated using fixed-bed adsorption column. The effects of pH(2.0-8.0), bed height (1-3 cm), inlet concentration (20-80 mg x L(-1)) and feed flow rate (5-11 mL x min(-1)) on the breakthrough characteristics of the adsorption system were determined. The results showed that the highest bed capacity of 223.80 mg x g(-1) was obtained under the condition of pH 2.0, 80 mg x L(-1) inlet dye concentration, 1.0 cm bed height and 5 mL x min(-1) flow rate. The adsorption data were fitted to three well-established fixed-bed adsorption models, namely, BDST model, Thomas model and Yoon-Nelson model. The results fitted well to the three models with coefficients of correlation R2 > 0.980 in different conditions. The TiO2 @ yeast composite microspheres have desired regeneration ability and could be reused for four times.
Donaldson, Keri J; Shaw, Leslie M
2010-01-01
We describe a multiple reaction monitoring positive ion HPLC/tandem mass spectrometric method for quantification of tacrolimus in human whole blood with online extraction and cleanup. Included in this procedure: API 2000 triple quadrupole mass spectrometer with turbo-ion spray source (Applied Biosystems, Foster City, CA); 10-port diverter/switching valve (Valco, Houston, TX); HPLC system (Agilent Technologies series 1100, Wilmington, DE); 10 mm (C(18)) guard cartridge (Perkin Elmer, Norwalk, CT) used as an extraction column; a Nova-Pak C18 analytical column (2.1 x 150 mm I.D., 4 microm, Waters Corp, Milford, MA); washing solution, methanol: 30 mM ammonium acetate pH 5.1 (80:20); eluting solution, methanol:30 mM ammonium acetate pH 5.1 (97:3); flow rate 0.8 mL/min; and a run-time of 2.8 min. The first and third quadrupoles were set to detect the ammonium adduct ion and a high mass fragment of tacrolimus (m/z 821.5-->768.3), and of an internal standard (ascomycin) (m/z 901.8-->834.4). The lower limit of quantification of this method is 3.75 mg/L. The concentration of drug is determined by comparing peak-area ratios for tacrolimus and internal standard to a standard curve constructed using non-weighted linear through zero regression.
Effects of Cooling Conditions on Tensile and Charpy Impact Properties of API X80 Linepipe Steels
NASA Astrophysics Data System (ADS)
Han, Seung Youb; Shin, Sang Yong; Lee, Sunghak; Kim, Nack J.; Bae, Jin-Ho; Kim, Kisoo
2010-02-01
In this study, four API X80 linepipe steel specimens were fabricated by varying the cooling rate and finish cooling temperature, and their microstructures and crystallographic orientations were analyzed to investigate the effects of the cooling conditions on the tensile and Charpy impact properties. All the specimens consisted of acicular ferrite (AF), granular bainite (GB), and martensite-austenite (MA) constituents. The volume fraction of MA increased with an increasing cooling rate, and the volume fraction and size of MA tended to decrease with an increasing finish cooling temperature. According to the crystallographic orientation analysis data, the effective grain size and unit crack path decreased as fine ACs having a large amount of high-angle grain boundaries were homogeneously formed, thereby leading to the improvement in the Charpy impact properties. The specimen fabricated with the higher cooling rate and lower finish cooling temperature had the highest upper-shelf energy (USE) and the lowest energy transition temperature (ETT), because it contained a large amount of MA homogeneously distributed inside fine AFs, while its tensile properties remained excellent.
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2013 CFR
2013-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2011 CFR
2011-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2010 CFR
2010-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2012 CFR
2012-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
49 CFR 192.8 - How are onshore gathering lines and regulated onshore gathering lines determined?
Code of Federal Regulations, 2014 CFR
2014-10-01
...? (a) An operator must use API RP 80 (incorporated by reference, see § 192.7), to determine if an... section. (1) The beginning of gathering, under section 2.2(a)(1) of API RP 80, may not extend beyond the furthermost downstream point in a production operation as defined in section 2.3 of API RP 80. This...
Polonini, H C; Silva, S L; Cunha, C N; Brandão, M A F; Ferreira, A O
2016-04-01
A challenge with compounding oral liquid formulations is the limited availability of data to support the physical, chemical and microbiological stability of the formulation. This poses a patient safety concern and a risk for medication errors. The objective of this study was to evaluate the compatibility of the following active pharmaceutical ingredients (APIs) in 10 oral suspensions, using SyrSpend SF PH4 (liquid) as the suspending vehicle: cholecalciferol 50,000 IU/mL, haloperidol 0.5 mg/mL, imipramine hydrochloride 5.0 mg/mL, levodopa/carbidopa 5.0/1.25 mg/mL, lorazepam 1.0 mg/mL, minocycline hydrochloride 10.0 mg/mL, tacrolimus monohydrate 1.0 mg/mL, terbinafine 25.0 mg/mL, tramadol hydrochloride 10.0 mg/mL and valsartan 4.0 mg/mL. The suspensions were stored both refrigerated (2 - 8 degrees C) and at controlled room temperature (20 - 25 degrees C). This is the first stability study for these APIs in SyrSpend SF PH4 (liquid). Further, the stability of haloperidol,ilmipramine hydrochloride, minocycline, and valsartan in oral suspension has not been previously reported in the literature. Compatibility was assessed by measuring percent recovery at varying time points throughout a 90 days period. Quantification of the APIs was performed by high performance liquid chromatography (HPLC-UV). Given the percentage of recovery of the APIs within the suspensions, the beyond-use date of the final preparations was found to be at least 90 days for most suspensions both refrigerated and at room temperature. Exceptions were: Minocycline hydrochloride at both storage temperatures (60 days), levodopa/carbidopa at room temperature (30 days), and lorazepam at room temperature (60 days). This suggests that compounded suspensions of APIs from different pharmacological classes in SyrSpend SF PH4 (liquid) are stable.
A Transport and Diffusion Model for Smoke Munitions.
1979-08-01
oo cri r^ <a- CM «1- »*■ l-H CO in en oo in cri vo Tt 4- CO CO i-) CM tD Z LU —I ts Z O LU Z2 O _l Q (_> =3 O LU _l S» O I-H I...DX * ^ Pox -xceMTPOO/^*^11-) + DY*CP(»y - ycr»JTP(^J)/<SVdti- s = -BA t- apis- zstA/Jj/JiCr))1’ ct = C--^*cJ //=• ^cc - ue. -zr) GO TD s5?? P...50 FORMAT(1101 PRINT m.NRPV 14 FORMAT! IHQ , •NUMBER Of ROUNDS PER VOLLEY ’.It/ ? IHO.-IDEAL IMPACT POINTS •/ ’ •O".’ NO. •,6X
NASA Astrophysics Data System (ADS)
Wu, Ying
2009-11-01
The development of a prototype compact neutron generator for the application of associated particle imaging (API) to be used for explosive and contraband detection will be presented. The API technique makes use of the 3.5 MeV alpha particles that are produced simultaneously with the 14 MeV neutrons in the deuterium-tritium (^2D(^3T,n)^4α) fusion reaction to determine the direction of the neutrons and reduce background noise. This method determines the spatial position of each neutron interaction and requires the neutrons to be generated from a small spot in order to achieve high spatial resolution. In this work an axial type neutron generator was designed and built with a predicted neutron yield of 10^8 n/s for a 50 μA D/T ion beam current accelerated to 80 kV. It was shown that the measured yield for a D/D gas filled generator was 2x10^5n/s, which scales to 2x10^7 n/s if a D/T gas fill is used. The generator utilizes an RF planar spiral antenna at 13.56 MHz to create a highly efficient inductively coupled plasma at the ion source. Experimental results show that beams with an atomic ion fraction of > 80% can be obtained with only 100 watts of RF power in the ion source. A single acceleration gap with a secondary electron suppression electrode is used in the acceleration column, to suppress secondary backscattered electrons produced at the target. Initial measurements of the neutron generator performance including the beam spot size and neutron yield under sealed operation will be discussed, along with suggestions for future improvements.
Granato, Luigi; Vander Elst, Luce; Henoumont, Celine; Muller, Robert N; Laurent, Sophie
2018-02-01
Thanks to the understanding of the relationships between the residence lifetime τ M of the coordinated water molecules to macrocyclic Gd-complexes and the rotational mobility τ R of these structures, and according to the theory for paramagnetic relaxation, it is now possible to design macromolecular contrast agents with enhanced relaxivities by optimizing these two parameters through ligand structural modification. We succeeded in accelerating the water exchange rate by inducing steric compression around the water binding site, and by removing the amide function from the DOTA-AA ligand [1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid mono(p-aminoanilide)] (L) previously designed. This new ligand 10[2(1-oxo-1-p-propylthioureidophenylpropyl]-1,4,7,10-tetraazacyclodecane-1,4,7-tetraacetic acid (L 1 ) was then covalently conjugated to API [O-(aminopropyl)inulin] to get the complex API-(GdL 1 )x with intent to slow down the rotational correlation time (τ R ) of the macromolecular complex. The evaluation of the longitudinal relaxivity at different magnetic fields and the study of the 17 O-NMR at variable temperature of the low-molecular-weight compound (GdL 1 ) showed a slight decrease of the τ M value (τM310 = 331 ns vs. τM310 = 450 ns for the GdL complex). Consequently to the increase of the size of the API-(GdL 1 )x complex, the rotational correlation time becomes about 360 times longer compared to the monomeric GdL 1 complex (τ R = 33,700 ps), which results in an enhanced proton relaxivity. © 2018 Wiley-VHCA AG, Zurich, Switzerland.
DOE Office of Scientific and Technical Information (OSTI.GOV)
LeGendre, M.
2012-04-01
We are seeking a code review of patches against DyninstAPI 8.0. DyninstAPI is an open source binary instrumentation library from the University of Wisconsin and University of Maryland. Our patches port DyninstAPI to the BlueGene/P and BlueGene/Q systems, as well as fix DyninstAPI bugs and implement minor new features in DyninstAPI.
NASA Astrophysics Data System (ADS)
Han, Seung Youb; Shin, Sang Yong; Seo, Chang-Hyo; Lee, Hakcheol; Bae, Jin-Ho; Kim, Kisoo; Lee, Sunghak; Kim, Nack J.
2009-08-01
In this study, four API X80 pipeline steels were fabricated by varying Mo, Cr, and V additions, and their microstructures and crystallographic orientations were analyzed to investigate the effects of their alloying compositions on tensile properties and Charpy impact properties. Because additions of Mo and V promoted the formation of fine acicular ferrite (AF) and granular bainite (GB) while prohibiting the formation of coarse GB, they increased the strength and upper-shelf energy (USE) and decreased the energy transition temperature (ETT). The addition of Cr promoted the formation of coarse GB and hard secondary phases, thereby leading to an increased effective grain size, ETT, and strength, and a decreased USE. The addition of V resulted in a higher strength, a higher USE, a smaller effective grain size, and a lower ETT, because it promoted the formation of fine and homogeneous of AF and GB. The steel that contains 0.3 wt pct Mo and 0.06 wt pct V without Cr had the highest USE and the lowest ETT, because its microstructure was composed of fine AF and GB while its maintained excellent tensile properties.
Wee, Young-Jung; Yun, Jong-Sun; Kang, Kui-Hyun; Ryu, Hwa-Won
2002-01-01
Enterococcus faecalis RKY1, a fumarate-reducing bacterium, was immobilized in an asymmetric hollow-fiber bioreactor (HFBR) for the continuous production of succinic acid. The cells were inoculated into the shell side of the HFBR, which was operated in transverse mode. Since the pH values in the HFBR declined during continuous operation to about 5.7, it was necessary to change the feed pH from 7.0 to 8.0 after 24 h of operation in order to enhance production of succinic acid. During continuous operation with a medium containing fumarate and glycerol, the productivity of succinate was 3.0-10.9 g/(L x h) with an initial concentration of 30 g/L of fumarate, 4.9-14.9 g/(L x h) with 50 g/L of fumarate, and 7.2-17.1 g/(L x h) with 80 g/L of fumarate for dilution rates between 0.1 and 0.4 h(-1). The maximum productivity of succinate obtained by the HFBR (17.1 g of succinate/[L x h]) was 1.7 times higher than that of the batch bioconversions (9.9 g of succinate/ [L x h]) with 80 g/L of fumarate. Furthermore, the long-term stability of the HFBR was demonstrated with a continuously efficient production of succinate for more than 15 d (360 h).
Lartigue, Audrey; Gruez, Arnaud; Briand, Loïc; Pernollet, Jean-Claude; Spinelli, Silvia; Tegoni, Mariella; Cambillau, Christian
2003-05-01
Pheromone-binding proteins (PBPs) are small helical proteins ( approximately 13-17 kDa) present in various sensory organs from moths and other insect species. They are involved in the transport of pheromones from the sensillar lymph to the olfactory receptors. Here, crystals of a PBP (Amel-ASP1) originating from honeybee (Apis mellifera L.) antennae and expressed as recombinant protein using the yeast Pichia pastoris are reported. Crystals of Amel-ASP1 have been obtained by the sitting-drop vapour-diffusion method using a nanodrop-dispensing robot under the following conditions: 200 nl of 40 mg ml(-1) protein solution in 10 mM Tris, 25 mM NaCl pH 8.0 was mixed with 100 nl of well solution containing 0.15 M sodium citrate, 1.5 M ammonium sulfate pH 5.5. The protein crystallizes in space group C222(1), with unit-cell parameters a = 74.8, b = 85.8, c = 50.2 A. With one molecule in the asymmetric unit, V(M) is 3.05 A(3) Da(-1) and the solvent content is 60%. A complete data set has been collected at 1.6 A resolution on beamline ID14-2 (ESRF, Grenoble). The nanodrop crystallization technique used with a novel optimization procedure made it possible to consume small amounts of protein and to obtain a unique crystal per nanodrop, suitable directly for data collection in-house or at a synchrotron-radiation source.
Nielsen, U; Hastrup, C; Klausen, M M; Pedersen, B M; Kristensen, G H; Jansen, J L C; Bak, S N; Tuerk, J
2013-01-01
The objective of this study has been to develop technologies that can reduce the content of active pharmaceutical ingredients (APIs) and bacteria from hospital wastewater. The results from the laboratory- and pilot-scale testings showed that efficient removal of the vast majority of APIs could be achieved by a membrane bioreactor (MBR) followed by ozone, ozone + hydrogen peroxide or powdered activated carbon (PAC). Chlorine dioxide (ClO(2)) was significantly less effective. MBR + PAC (450 mg/l) was the most efficient technology, while the most cost-efficient technology was MBR + ozone (156 mg O(3)/l applied over 20 min). With MBR an efficient removal of Escherichia coli and enterococci was measured, and no antibiotic resistant bacteria were detected in the effluent. With MBR + ozone and MBR + PAC also the measured effluent concentrations of APIs (e.g. ciprofloxacin, sulfamethoxazole and sulfamethizole) were below available predicted no-effect concentrations (PNEC) for the marine environment without dilution. Iodinated contrast media were also reduced significantly (80-99% for iohexol, iopromide and ioversol and 40-99% for amidotrizoateacid). A full-scale MBR treatment plant with ozone at a hospital with 900 beds is estimated to require an investment cost of €1.6 mill. and an operating cost of €1/m(3) of treated water.
Molina, Diana; Patiño, Luisa; Quintero, Mónica; Cortes, José; Bastos, Sara
2014-02-01
The coffee berry borer Hypothenemus hampei is a pest that causes great economic damage to coffee grains worldwide. Because the proteins consumed are digested by aspartic proteases in the insect's midgut, the inhibition of these proteases by transferring a gene encoding an aspartic protease inhibitor from Lupinus bogotensis Benth. to coffee plants could provide a promising strategy to control this pest. Five aspartic protease inhibitors from L. bogotensis (LbAPI) were accordingly purified and characterized. The gene encoding the L. bogotensis aspartic protease inhibitor (LbAPI), with the highest inhibitory activity against H. hampei, was expressed in Escherichia coli and the purified recombinant protein (rLbAPI), with a molecular mass of 15 kDa, was subsequently assessed for its ability to inhibit the aspartic protease activity present in the H. hampei midgut in vitro, as well as its effects on the growth and development of H. hampei in vivo. The in vitro experiments showed that rLbAPI was highly effective against aspartic proteases from H. hampei guts, with a half maximal inhibitory concentration (IC50) of 2.9 μg. The in vivo experiments showed that the concentration of rLbAPI (w/w) in the artificial diet necessary to cause 50% mortality (LD50) of the larvae was 0.91%. The amino acid sequence of LbAPI had high homology (52-80%) to the seed storage proteins, vicilin and β-conglutin, suggesting that this protein was generated by evolutionary events from a β-conglutin precursor. Based on these results, LbAPI may have a dual function as storage protein, and as defense protein against H. hampei. These results provide a promising alternative to obtain a coffee plant resistant to H. hampei. Copyright © 2013 Elsevier Ltd. All rights reserved.
Alexander, Anthony J; Ma, Lianjia
2009-02-27
This paper focuses on the application of RPLC x RPLC to pharmaceutical analysis and addresses the specific problem of separating co-eluting impurities/degradation products that maybe "hidden" within the peak envelope of the active pharmaceutical ingredient (API) and thus may escape detection by conventional methods. A comprehensive two-dimensional liquid chromatograph (LC x LC) was constructed from commercially available HPLC equipment. This system utilizes two independently configurable 2nd dimension binary pumping systems to deliver independent flow rates, gradient profiles and mobile phase compositions to dual Fused-Core secondary columns. Very fast gradient separations (30s total cycle time) were achieved at ambient temperature without excessive backpressure and without compromising optimal 1st dimension sampling rates. The operation of the interface is demonstrated for the analysis of a 1mg/ml standard mixture containing 0.05% of a minor component. The practicality of using RPLC x RPLC for the analysis of actual co-eluting pharmaceutical degradation products, by exploiting pH-induced changes in selectivity, is also demonstrated using a three component mixture. This mixture (an API, an oxidation product of the API at 1.0%, w/w, and a photo degradant of the API at 0.5%, w/w) was used to assess the stability indicating nature of an established LC method for analysis of the API.
Infections of Nosema ceranae in four different honeybee species.
Chaimanee, Veeranan; Warrit, Natapot; Chantawannakul, Panuwan
2010-10-01
The microsporidium Nosema ceranae is detected in honeybees in Thailand for the first time. This endoparasite has recently been reported to infect most Apis mellifera honeybee colonies in Europe, the US, and parts of Asia, and is suspected to have displaced the endemic endoparasite species, Nosema apis, from the western A. mellifera. We collected and identified species of microsporidia from the European honeybee (A. mellifera), the cavity nesting Asian honeybee (Apis cerana), the dwarf Asian honeybee (Apis florea) and the giant Asian honeybee (Apis dorsata) from colonies in Northern Thailand. We used multiplex PCR technique with two pairs of primers to differentiate N. ceranae from N. apis. From 80 A. mellifera samples, 62 (77.5%) were positively identified for the presence of the N. ceranae. Amongst 46 feral colonies of Asian honeybees (A. cerana, A. florea and A. dorsata) examined for Nosema infections, only N. ceranae could be detected. No N. apis was found in our samples. N. ceranae is found to be the only microsporidium infesting honeybees in Thailand. Moreover, we found the frequencies of N. ceranae infection in native bees to be less than that of A. mellifera. Copyright 2010 Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Wang, W.
2017-12-01
Theory resultsWang wanli left-skew L distribution density function is formula below, its interval is from -∞ to +1 , x indicates center pressure of hurricane, xA represents its long term mean, [(x-xA)/x] is standard random variable on boundary condition f(+1) =0 and f(-∞) =0 Standard variable is negative when x is less than xA ;standard variable is positive when x is more than xA : the standard variable is equal to zero when x is just xA; thus, standard variable is just -∞ if x is zero ,standard variable is also +1 if x is +∞ , finally standard random variable fall into interval of - ∞ 1 to +1 Application in table "-" signal presents individual hurricane center pressure is less than the hurricane long term averaged value; "+" signal presents individual hurricane center pressure is more than the hurricane its mean of long term, of course the mean (xA) is also substituted by other "standard" or "expected value" Tab multi-levels of hurricane strength or intense Index of Hurricane [(X-XA)/X]% XA / X Categories Descriptions X/ XA Probabilities Formula -∞ +∞ → 0 → 0 …… …… …… …… …… …… < -900 > 10.0 < -15 > extreme ( Ⅵ ) < 0.10 -800, -900 9.0, 10.0 -15 extreme ( Ⅵ ) 0.11, 0.10 -700, -800 8.0, 9.0 -14 extreme ( Ⅴ ) 0.13, 0.11 -600, -700 7.0, 8.0 -13 extreme ( Ⅳ ) 0.14, 0.13 -500, -600 6.0, 7.0 -12 extreme ( Ⅲ ) 0.17, 0.14 0.05287 % L(-5.0)- L(-6.0) -400, -500 5.0, 6.0 -11 extreme ( Ⅱ ) 0.20, 0.17 0.003 % L(-4.0)- L(-5.0) -300, -400 4.0, 5.0 -10 extreme ( Ⅰ ) 0.25, 0.20 0.132 % L(-3.0)- L(-4.0) -267, -300 3.67, 4.00 -9 strongest ( Ⅲ )-superior 0.27, 0.25 0.24 % L(-2.67)-L(-3.00) -233, -267 3.33, 3.67 -8 strongest ( Ⅱ )-medium 0.30, 0.27 0.61 % L(-2.33)-L(-2.67) -200, -233 3.00, 3.33 -7 strongest ( Ⅰ )-inferior 0.33, 0.30 1.28 % L(-2.00)- L(-2.33) -167, -200 2.67, 3.00 -6 strong ( Ⅲ )-superior 0.37, 0.33 2.47 % L(-1.67)-L(-2.00) -133, -167 2.33, 2.67 -5 strong ( Ⅱ )-medium 0.43, 0.37 4.43 % L(-1.33)- L(-1.67) -100, -133 2.00, 2.33 -4 strong ( Ⅰ )-inferior 0.50, 0.43 6.69 % L(-1.00) -L(-1.33) -67, -100 1.67, 2.00 -3 normal ( Ⅲ ) -superior 0.60, 0.50 9.27 % L(-0.67)-L(-1.00) -33, -67 1.33, 1.67 -2 normal ( Ⅱ )-medium 0.75, 0.60 11.93 % L(-0.33)-L(-0.67) 00, -33 1.00, 1.33 -1 normal ( Ⅰ )-inferior 1.0, 0.75 12.93 % L(0.00)-L(-0.33) 33, 00 0.67, 1.00 +1 normal 1.49, 1.00 34.79 % L(0.33)-L(0.00) 67, 33 0.33, 0.67 +2 weak 3.03, 1.49 12.12 % L(0.67)-L(0.33) 100, 67 0.00, 0.33 +3 more weaker ∞, 3.03 3.08 % L(1.00)-L(0.67)
Lg and Other Regional Phases in South America
1990-09-01
L-StLdi’: del sistema crtoza -- mantc’ super io:r; entre eil’:’s s!:, puioden men’: ir-nar lo:s sig~uientest Mt:dc’s Sismi’:os, ciravime-tr icc’s...difarentes prc’piedades fisi’:ez. Este rn~ toc utiliza las leyes de Snell y de las velcidades aparuntes (Dcubrin y Olhc’vich, 1959). Con la api icaci~’I de...2.97 45 3.0 4.45 3.30 4t 8.0 4.40 3.32 140 S . 5 .50 3.35 100 TCC-CUS ( tabla * 2 ) El per fil Toc -onc:e-Cuzco (fig.2) est6 reduc.ido casi
Effect of Temperature on the Corrosion Behavior of API X120 Pipeline Steel in H2S Environment
NASA Astrophysics Data System (ADS)
Okonkwo, Paul C.; Sliem, Mostafa H.; Shakoor, R. A.; Mohamed, A. M. A.; Abdullah, Aboubakr M.
2017-08-01
The corrosion behavior of newly developed API X120 C-steel that is commenced to be used for oil pipelines was studied in a H2S saturated 3.5 wt.% NaCl solution between 20 and 60 °C using potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The corrosion products formed on the surface of the alloy were characterized using x-ray diffraction and scanning electron microscopy. It has been noticed that the formation of corrosion product layer takes place at both lower and higher temperatures which is mainly comprised of iron oxides and sulfides. The electrochemical results confirmed that the corrosion rate decreases with increasing temperature up to 60 °C. This decrease in corrosion rate with increasing temperature can be attributed to the formation of a protective layer of mackinawite layer. However, cracking in the formed mackinawite layer may not be responsible for the increase in the corrosion rate. More specifically, developed pourbaix diagrams at different temperatures showed that the formed protective layer belongs to mackinawite (FeS), a group of classified polymorphous iron sulfide, which is in good agreement with the experimental results. It is also noticed that the thickness of corrosion products layer increases significantly with decrease in the corrosion rate of API X120 steel exposed to H2S environment. These findings indicate that API X120 C-steel is susceptible to sour corrosion under the above stated experimental conditions.
Macedo, Iara T F; Bevilaqua, Claudia M L; de Oliveira, Lorena M B; Camurça-Vasconcelos, Ana L F; Vieira, Luiz da S; Oliveira, Fabrício R; Queiroz-Junior, Eudson M; Portela, Bruno G; Barros, Renata S; Chagas, Ana C S
2009-01-01
The objective of this work was to evaluate ovicidal and larvicidal effects of Eucalyptus globulus essential oil (EGEO) on Haemonchus contortus. The chemical composition determination of EGEO was through gas chromatography and mass spectrometry. Egg hatch test (EHT) was performed in concentrations 21.75; 17.4; 8.7; 5.43 e 2.71 mg x mL(-1). In larval development test (LDT) were used the concentrations 43.5; 21.75; 10.87; 5.43 e 2.71 mg x mL(-1). Each trial was conducted by negative control with Tween 80 (3%) and positive control, 0.02 mg x mL(-1) of thiabendazole in EHT and 0.008 mg x mL(-1) of ivermectin in LDT. The maximum effectiveness of EGEO on eggs was 99.3% in concentration of 21.75 mg x mL(-1) and on larvae was 98.7% in concentration 43.5 mg x mL(-1). The concentration of EGEO that inhibits 50% of the eggs and larvae was 8.3 and 6.92 mg x mL(-1), respectively. The oil chemical analysis identified as main component the monoterpen 1,8-cineol. EGEO presented ovicidal and larvicidal activities in vitro, revealing a good potential for use in the control of sheep and goat gastrointestinal nematodes.
Required ozone doses for removing pharmaceuticals from wastewater effluents.
Antoniou, Maria G; Hey, Gerly; Rodríguez Vega, Sergio; Spiliotopoulou, Aikaterini; Fick, Jerker; Tysklind, Mats; la Cour Jansen, Jes; Andersen, Henrik Rasmus
2013-07-01
The aim of the this study was to investigate the ozone dosage required to remove active pharmaceutical ingredients (APIs) from biologically treated wastewater of varying quality, originated from different raw wastewater and wastewater treatment processes. Secondary effluents from six Swedish wastewater treatment plants (WWTP) were spiked with 42 APIs (nominal concentration μg/L) and treated with different O₃ doses (0.5-12.0 mg/L ozone) in bench-scale experiments. In order to compare the sensitivity of APIs in each matrix, the specific dose of ozone required to achieve reduction by one decade of each investigated API (DDO₃) was determined for each effluent by fitting a first order equation to the remaining concentration of API at each applied ozone dose. Ozone dose requirements were found to vary significantly between effluents depending on their matrix characteristics. The specific ozone dose was then normalized to the dissolved organic carbon (DOC) of each effluent. The DDO₃/DOC ratios were comparable for each API between the effluents. 15 of the 42 investigated APIs could be classified as easily degradable (DDO₃/DOC ≤ 0.7), while 19 were moderately degradable (0.7 < DDO₃/DOC ≤ 1.4), and 8 were recalcitrant towards O₃-treatment (DDO₃/DOC >1.4). Furthermore, we predict that a reasonable estimate of the ozone dose required to remove any of the investigated APIs may be attained by multiplying the experimental average DDO₃/DOC obtained with the actual DOC of any effluent. Copyright © 2013 Elsevier B.V. All rights reserved.
Grigori, Katerina; Loukas, Yannis L; Malenović, Anđelija; Samara, Vicky; Kalaskani, Anastasia; Dimovasili, Efi; Kalovidouri, Magda; Dotsikas, Yannis
2017-10-25
A sensitive Liquid Chromatography tandem mass spectrometry (LC-MS/MS) method was developed and validated for the quantitative analysis of three potential genotoxic impurities (318BP, M9, S5) in meropenem Active Pharmaceutical Ingredient (API). Due to the requirement for LOD values in ppb range, a high concentration of meropenem API (30mg/mL) had to be injected. Therefore, efficient determination of meropenem from its impurities became a critical aim of this study, in order to divert meropenem to waste, via a switching valve. After the selection of the important factors affecting analytes' elution, a Box-Behnken design was utilized to set the plan of experiments conducted with UV detector. As responses, the separation factor s between the last eluting impurity and meropenem, as well as meropenem retention factor k were used. Grid point search methodology was implemented aiming to obtain the optimal conditions that simultaneously comply to the conflicted criteria. Optimal mobile phase consisted of ACN, methanol and 0.09% HCOOH at a ratio 71/3.5/15.5v/v. All impurities and internal standard omeprazole were eluted before 7.5min and at 8.0min the eluents were directed to waste. The protocol was transferred to LC-MS/MS and validated according to ICH guidelines. Copyright © 2017 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Goto, Sota; Nakata, Hiroshi; Toyoda, Shunsuke; Okabe, Takatoshi; Inoue, Tomohiro
2017-10-01
This paper describes development of heavy-walled API X80 grade high-frequency electric resistance-welded (HFW) line pipes and conductor-casing pipes with wall thicknesses up to 20.6 mm. A fine bainitic-ferrite microstructure, which is preferable for low-temperature toughness, was obtained by optimizing the carbon content and applying the thermomechanical controlled hot-rolling process. As a result, the Charpy ductile-brittle transition temperature (DBTT) was well below 227 K (-46 °C) in the base metal of the HFW line pipe. When the controlled hot-rolling ratio (CR) was increased from 23 to 48 pct, the area average grain size decreased from 15 to 8 μm. The dependence of CTOD properties on CR was caused by the largest grain which is represented by the area average grain size. No texture development due to the increase of CR from 23 to 48 pct was observed. In addition, because controlled in-line heat treatment of the longitudinal weld seam also produced the fine bainitic-ferrite microstructure at the weld seam, DBTT was lower than 227 K (-46 °C) at the weld portion. The developed pipes showed good girth weldability without preheat treatment, and fracture in the tensile test initiated from the base metal in all cases.
Han, Xi; Ghoroi, Chinmay; Davé, Rajesh
2013-02-14
Motivated by our recent study showing improved flow and dissolution rate of the active pharmaceutical ingredient (API) powders (20 μm) produced via simultaneous micronization and surface modification through continuous fluid energy milling (FEM) process, the performance of blends and direct compacted tablets with high drug loading is examined. Performance of 50 μm API powders dry coated without micronization is also considered for comparison. Blends of micronized, non-micronized, dry coated or uncoated API powders at 30, 60 and 70% drug loading, are examined. The results show that the blends containing dry coated API powders, even micronized ones, have excellent flowability and high bulk density compared to the blends containing uncoated API, which are required for direct compaction. As the drug loading increases, the difference between dry coated and uncoated blends is more pronounced, as seen in the proposed bulk density-FFC phase map. Dry coating led to improved tablet compactibility profiles, corresponding with the improvements in blend compressibility. The most significant advantage is in tablet dissolution where for all drug loadings, the t(80) for the tablets with dry coated APIs was well under 5 min, indicating that this approach can produce nearly instant release direct compacted tablets at high drug loadings. Copyright © 2012 Elsevier B.V. All rights reserved.
Yao, Ru-Xin; Cui, Xin; Jia, Xiao-Xia; Zhang, Fu-Qiang; Zhang, Xian-Ming
2016-09-19
A porous luminescent zinc(II) metal-organic framework (MOF) with a NbO net [Zn2(tptc)(apy)2-x(H2O)x]·H2O (1) (where x ≈ 1, apy = aminopyridine, H4tptc = terphenyl-3,3″,5,5″-tetracarboxylic acid), constructed using paddlewheel [Zn2(COO)4] clusters and π-electron-rich terphenyl-tetracarboxylic acid, has been solvothermally synthesized and characterized. Interestingly, the material displays efficient, reversible adsorption of radioactive I2 in vapor and in solution (up to 216 wt %). The strong affinity for I2 is mainly due to it having large porosity, a conjugated π-electron aromatic system, halogen bonds, and electron-donating aminos. Furthermore, luminescent study indicated that 1 exhibits high sensitivity to electron-deficient nitrobenzene explosives via fluorescence quenching.
A Case of Onychomycosis Caused by Rhodotorula glutinis.
Uludag Altun, Hatice; Meral, Tuba; Turk Aribas, Emel; Gorpelioglu, Canan; Karabicak, Nilgun
2014-01-01
Rhodotorula spp. have emerged as opportunistic pathogens, particularly in immunocompromised patients. The current study reports a case of onychomycosis caused by Rhodotorula glutinis in a 74-year-old immunocompetent female. The causative agent was identified as R. glutinis based on the pinkish-orange color; mucoid-appearing yeast colonies on Sabouraud Dextrose Agar at 25°C; morphological evaluation in the Corn Meal-Tween 80 agar; observed oval/round budding yeast at 25°C for 72 hours; no observed pseudohyphae; positive urease activity at 25°C for 4 days; and assimilation features detected by API ID 32C kit and automated Vitek Yeast Biochemical Card 2 system. Antifungal susceptibility test results were as follows: amphotericin B (MIC = 0.5 µg/mL), fluconazole (MIC = 128 µg/mL), itraconazole (MIC = 0.125 µg/mL), voriconazole (MIC = 1 µg/mL), posaconazole (MIC = 0.5 µg/mL), anidulafungin (MIC = 0.5 µg/mL), and caspofungin (MIC = 16 µg/mL). Antifungal therapy was initiated with oral itraconazole at a dose of 400 mg/day; seven-day pulse therapy was planned at intervals of three weeks. Clinical recovery was observed in the clinical evaluation of the patient before the start of the third cure. Although R. glutinis has rarely been reported as the causative agent of onychomycosis, it should be considered.
NASA Astrophysics Data System (ADS)
Shaari, M. S.; Akramin, M. R. M.; Ariffin, A. K.; Abdullah, S.; Kikuchi, M.
2018-02-01
The paper is presenting the fatigue crack growth (FCG) behavior of semi-elliptical surface cracks for API X65 gas pipeline using S-version FEM. A method known as global-local overlay technique was used in this study to predict the fatigue behavior that involve of two separate meshes each specifically for global (geometry) and local (crack). The pre-post program was used to model the global geometry (coarser mesh) known as FAST including the material and boundary conditions. Hence, the local crack (finer mesh) will be defined the exact location and the mesh control accordingly. The local mesh was overlaid along with the global before the numerical computation taken place to solve the engineering problem. The stress intensity factors were computed using the virtual crack closure-integral method (VCCM). The most important results is the behavior of the fatigue crack growth, which contains the crack depth (a), crack length (c) and stress intensity factors (SIF). The correlation between the fatigue crack growth and the SIF shows a good growth for the crack depth (a) and dissimilar for the crack length (c) where stunned behavior was resulted. The S-version FEM will benefiting the user due to the overlay technique where it will shorten the computation process.
[Inhibition of osthole for resorption of rats femur tissue in vitro].
Zhou, Jian; Ren, Xue-mei; Ma, Xiao-ni; Gao, Yu-hai; Yan, Li-juan; Shi, Wen-gui; Chen, Ke-ming
2015-09-01
To investigate osthole effect on femoral tissue resorption activity of rat in vitro. Six SD rats weighted (80 ± 5) g were used to isolate and culture femoral tissue (diaphyses and metaphysis) in vitro. The cultured tissue were devided into control group, estradiol group and osthole group. The femoral tissue was treated with final concentration of 1 x 10(-5) mol/L osthole and 1 x 10(-8) mol/L estradiol culture in vitro at 48 hours after cultured. Tartrate-resistant acid phosphatase (StrACP) activity, glucose and Lactic acid content, StrACP, MCSF (Macrophage colony stimulating factor) and CTSK (Cathepsin K) mRNA was detected by Real-Time RT-PCR were detected. Concetration of Alkaline phosphatase activity were 2226 and 2498 in 1 x 10(-5) mol/L osthole and 1 x 10(-8) mol/L estradiol respectively. As compared with control group, the activity of StrACP of 1 x 10(-5) mol/L osthole and 1 x 10(-8) mol/L estradiol were inhibited at 6, 9, 12 days (P < 0.05); under treatment of in l x 10(-5) mol/L osthole, the content of Lactic acid were increased and the content of glucose were decreased at 3, 6, 9 days (P < 0.05); StrACP, MCSF and CTSK mRNA expression level were inhibited at 6, 9 days (P < 0.05). Osthole can inhibit bone resorption and raise the level of nutrition metabolism of femurs tissue.
Component-resolved diagnosis in hymenoptera allergy.
Antolín-Amérigo, D; Ruiz-León, B; Boni, E; Alfaya-Arias, T; Álvarez-Mon, M; Barbarroja-Escudero, J; González-de-Olano, D; Moreno-Aguilar, C; Rodríguez-Rodríguez, M; Sánchez-González, M J; Sánchez-Morillas, L; Vega-Castro, A
Component-resolved diagnosis based on the use of well-defined, properly characterised and purified natural and recombinant allergens constitutes a new approach in the diagnosis of venom allergy. Prospective readers may benefit from an up-to-date review on the allergens. The best characterised venom is that of Apis mellifera, whose main allergens are phospholipase A2 (Api m1), hyaluronidase (Api m2) and melittin (Api m4). Additionally, in recent years, new allergens of Vespula vulgaris have been identified and include phospholipase A1 (Ves v1), hyaluronidase (Ves v2) and antigen 5 (Ves v5). Polistes species are becoming an increasing cause of allergy in Europe, although only few allergens have been identified in this venom. In this review, we evaluate the current knowledge about molecular diagnosis in hymenoptera venom allergy. Copyright © 2017 SEICAP. Published by Elsevier España, S.L.U. All rights reserved.
NASA Astrophysics Data System (ADS)
Solehudin, Agus; Nurdin, Isdiriayani
2014-03-01
Corrosion and inhibition studies on API 5LX65 carbon steel in chloride solution containing various concentrations of benzotriazole has been conducted at temperature of 70°C using Electrochemical Impedance Spectroscopy (EIS). Corroded carbon steel surface with and without inhibitor have been observed using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Energy Dispersive Spectroscopy (EDS). The objectives of this research are to study the performance of benzotriazole as corrosion inhibitors. The experimental results of carbon steel corrosion in 3.5% NaCl solution containing 500 mg/l H2S at different BTAH concentrations showed that corrosion rate of carbon steel decreases with increasing of BTAH concentrations from 0 to 10 mmol/l. The inhibition efficiency of BTAH was found to be affected by its concentration. The optimum efficiency obtained of BTAH is 93% at concentration of 5 mmol/l. The result of XRD and EDS analysis reveal the iron sulfide (FeS) formation on corroded carbon steel surface without inhibitor. The EDS spectrum show the Nitrogen (N) bond on carbon steel surface inhibited by BTAH.
Bacteriological contamination of well water in Makurdi town, Benue State, Nigeria.
Mile, I I; Jande, J A; Dagba, B I
2012-11-01
Bacteriological contamination of well water in Makurdi town, of Benue State, Nigeria was investigated. A total of 15 water samples were collected from hand dug wells and analyzed for total bacteria count as it affect the quality of drinking water for both wet and dry season. The analysis was done according to standard methods of water examination and as reported in WHO guide limit for drinking water. The investigation revealed that the wells examined were highly contaminated with bacteria. Wells 6 and 7 showed highest total bacteria counts of 7.0 x 10(5)/100 mL and 8.2 x 10(5)/100 mL in the wet season, while wells 7 and 2 showed highest total bacteria counts of 8.0 x 10(5)/100 mL and 5.5 x 10(5)/100 mL in the dry season. The contamination of all wells could be due to improper construction of wells, refuse dumping sites and various human activities around the wells. Water generally from these wells is not safe for drinking except some form of treatment is carried out.
[Nitrogen and phosphorus composition in urban runoff from the new development area in Beijing].
Li, Li-Qing; Lü, Shu-Cong; Zhu, Ren-Xiao; Liu, Ze-Quan; Shan, Bao-Qing
2012-11-01
Stormwater runoff samples were collected from two impervious roof and road of the new development area in Beijing, during three rainfall events in an attempt to characterize the urban runoff and determine nitrogen and phosphorus composition. The outcomes are expected to offer the practical guidance in sources control of urban runoff pollution. The results indicated that the stormwater runoff from the studied area presented a strong first flush for all monitored events and constituents. Eighty percent of the total pollutant loads were transported by the first 10 mm flow volume for roof runoff, whereas 80% of the total pollutant loads were discharged by the first 15 mm flow volume for road runoff. Average EMCs of TSS, COD, TN, NH4(+) -N, NO3(-) -N and TP for roof runoff were 50.2 mg x L(-1), 81.7 mg x L(-1), 6.07 mg x L(-1), 2.94 mg x L(-1), 1.05 mg x L(-1), and 0.11 mg x L(-1), respectively. Average EMCs of TSS, COD, TN, NH4(+) -N, NO3(-)-N and TP for road runoff were 539.0 mg x L(-1), 276.4 mg x L(-1), 7.00 mg x L(-1), 1.71 mg x L(-1), 1.51 mg x L(-1), and 0.61 mg x L(-1), respectively. Moreover, for the roof runoff, the particle-bound fraction was 20.8% for COD, 12.3% for TN, and 49.7% for TP. For road runoff, the particle-bound fraction was 68.6% for COD, 20.0% for TN, and 73.6% for TP. Nitrogen in roof runoff was predominantly dissolved (87.7%), with ammonia (57.6%) and nitrate (22.5%). Nitrogen in road runoff was also predominantly dissolved (80.0%), with ammonia (42.1%) and nitrate (35.0%). These findings can assist the development of effective source control strategies to immobilize dissolved and particulate-bound nitrogen/phosphorus in urban stormwater.
Artificial periodic irregularities in the high-latitude ionosphere excited by the HAARP facility
NASA Astrophysics Data System (ADS)
Bakhmetieva, N. V.; Grach, S. M.; Sergeev, E. N.; Shindin, A. V.; Milikh, G. M.; Siefring, C. L.; Bernhardt, P. A.; McCarrick, M.
2016-07-01
We present results of the new observations of artificial periodic irregularities (APIs) in the ionosphere using the High Frequency Active Auroral Research Program (HAARP) heating facility carried out in late May and early June 2014.The objective of this work is to detect API using high-latitude facility and analyze possible differences of the temporal and spatial variations of the API echoes in the high (HAARP) and middle (Sura) latitudes. Irregularities were created by the powerful wave of X mode and were sounded using the short probing pulses signals of X mode. API echoes were observed in the D, E, and F regions of the ionosphere. Amplitudes and characteristic times of the API echoes were measured. The API growth and decay times at HAARP (high latitudes) observed were similar to those at the Sura heating facility (midlatitudes).
Genetics Home Reference: X-linked juvenile retinoschisis
... juvenile retinoschisis (XLRS): a review of genotype-phenotype relationships. Semin Ophthalmol. 2013 Sep-Nov;28(5-6): ... for Links Data Files & API Site Map Subscribe Customer Support USA.gov Copyright Privacy Accessibility FOIA Viewers & ...
X-ray Full Field Microscopy at 30 keV
NASA Astrophysics Data System (ADS)
Marschall, F.; Last, A.; Simon, M.; Kluge, M.; Nazmov, V.; Vogt, H.; Ogurreck, M.; Greving, I.; Mohr, J.
2014-04-01
In our X-ray full field microscopy experiments, we demonstrated a resolution better than 260 nm over the entire field of view of 80 μm × 80 μm at 30 keV. Our experimental setup at PETRA III, P05, had a length of about 5 m consisting of an illumination optics, an imaging lens and a detector. For imaging, we used a compound refractive lens (CLR) consisting of mr-L negative photo resist, which was fabricated by deep X-ray lithography. As illumination optics, we choose a refractive rolled X-ray prism lens, which was adapted to the numerical aperture of the imaging lens.
Optimizing Secure Communication Standards for Disadvantaged Networks
2009-09-01
created using LATEX with the editor Kile [5]. 5.1.2 Libraries and APIs Several libraries were important to the successful completion of this study. The...Explorer. http://www.microsoft.com/windows/ internet-explorer/default.aspx. [5] Kile - An Integrated LaTeX Environment. http://kile.sourceforge.net/. [6
Code of Federal Regulations, 2013 CFR
2013-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
Code of Federal Regulations, 2014 CFR
2014-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
Code of Federal Regulations, 2012 CFR
2012-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
Code of Federal Regulations, 2011 CFR
2011-01-01
... (“API”), Publication 1509, Thirteenth Edition, January 1995. API Publication 1509, Thirteenth Edition has been updated to API Publication 1509, Fifteenth Edition, April 2002. API Publication 1509... the materials incorporated by reference may be obtained from: API, 1220 L Street, NW., Washington, DC...
1988-01-01
steels. The high quality linepipe steels are During the last few years, a large scale conducted. During the last few years, API X52 of efforts has been...with satisfied results. mass production of API X52 steels in production line will be demonstrated. The mass production of line pipe steels in the plate...mill of China Steel Corporation has also been conducted. More than eighty Procedures thousand tons of API X52 has been manufactured during the last 2
Detection of Xeljanz enantiomers in diethyl amine active pharmaceutical ingredients and tablets.
Wang, Na-Na; Zhang, Dao-Lin; Jiang, Xin-Hui
2015-03-01
A high-performance liquid chromatography (HPLC) method was established to detect Xeljanz enantiomers in active pharmaceutical ingredients (APIs) and tablets. The separation was achieved on a Chiralpak IC column using a mobile phase of hexane-ethanol-diethylamine (65:35:0.1, v/v). The detection wavelength was 289 nm. The peak areas and the enantiomer concentrations in the range of 0.15-2.25 μg•mL(-1) were in high linearity, with correlation coefficients higher than 0.999. The recoveries were 86.44% at the concentrations of 7.5, 18.75, and 37.5 μg•mL(-1) . The limit of detection (LOD) and limit of quantification (LOQ) were 0.042 and 0.14 μg•mL(-1) , respectively. This HPLC method is suitable for detecting the enantiomers of Xeljanz in its APIs and tablets. © 2014 Wiley Periodicals, Inc.
Chicken pox associated thrombocytopenia in adults.
Ali, Nadir; Anwar, Masood; Majeed, Irfan; Tariq, Waheed Uz Zaman
2006-04-01
To determine the frequency and magnitude of thrombocytopenia associated with chicken pox in adults. Observational descriptive study. Combined Military Hospital, Attock, from July 2003 to June 2004. All patients of age 15 years and above with history of fever, followed by appearance of the typical vesicular chicken pox rash, were inducted after informed consent. Two milliliters of whole blood was collected on day 1 of admission, and blood counts were performed. Patients were admitted and given 800 mg oral acyclovir, 5 times/day, for 7 days, in addition to symptomatic treatment. Patients were followed till 8 weeks. A total of 410 patients of chicken pox were received, out of which 270 were included. Age of patients ranged between 15 and 40 years with median age of 21 years. Platelet count on the day of admission ranged between 29 x 10(9)/L to 513 x 10(9)/L, mean platelet count 178 x 10(9)/L. Platelet count < 150 x 10(9)/L was detected in 80/270 (30%) patients. Platelet count in thrombocytopenia patients was from 29 x 10(9)/L to 149 x 10(9)/L with mean 121 x 10(9)/L. Thrombocytopenia recovered within 02 weeks in 78/80 (97%) patients. In 2 patients, thrombocytopenia recovered in 3 weeks. None of the patients developed purpuric spots, ecchymosis or bleeding manifestations. Thrombocytopenia in chicken pox is a common entity. Platelet count remains above 25 x 10(9) /L, which is usually not associated with bleeding manifestations. None of the patients in this series developed purpura. No specific pattern of total leukocyte counts was predictive of the progression or regression in platelet count.
Putra, Ramadhani Eka; Kinasih, Ida
2014-01-01
Tomato (Lycopersicon esculentum Mill.) is considered as one of major agricultural commodity of Indonesia farming. However, monthly production is unstable due to lack of pollination services. Common pollinator agent of tomatoes is bumblebees which is unsuitable for tropical climate of Indonesia and the possibility of alteration of local wild plant interaction with their pollinator. Indonesia is rich with wild bees and some of the species already domesticated for years with prospect as pollinating agent for tomatoes. This research aimed to assess the efficiency of local honey bee (Apis cerana L.) and stingless bee (Trigona iridipennis), as pollinator of tomato. During this research, total visitation rate and total numbers of pollinated flowers by honey bee and stingless bee were compared between them with bagged flowers as control. Total fruit production, average weight and size also measured in order to correlated pollination efficiency with quantity and quality of fruit produced. Result of this research showed that A. cerana has slightly higher rate of visitation (p>0.05) and significantly shorter handling time (p < 0.05) than T. iridipennis due to their larger colony demand and low reward provide by tomato flowers. However, honey bee pollinated tomato flowers more efficient pollinator than stingless bee (80.3 and 70.2% efficiency, respectively; p < 0.05) even though the average weight and size of tomatoes were similar (p>0.05). Based on the results, it is concluded that the use of Apis cerana and Trigona spp., for pollinating tomatoes in tropical climates could be an alternative to the use of non-native Apis mellifera and bumblebees (Bombus spp.). However, more researches are needed to evaluate the cost/benefit on large-scale farming and greenhouse pollination using both bees against other bee species and pollination methods.
[Anaphylactoid reactions induced by polysorbate 80 on Beagle dogs].
Sun, Weiwei; Li, Yikui; Wang, Naijie; Du, Feng; Hao, Wei; Zhao, Le
2011-07-01
To evaluate the sensitization effect of polysorbate 80 from different factories on Beagle dogs. Beagles dogs were randomly divided into 5 groups, 3 in each group, received respectively the intravenous infusion of polysorbate 80 made by four factories in the concentration of 0.5%, with the constant infusing speed of 5 mL x min(-1) and volume of 10 mL x kg(-1). Changes were observed before infusion and in the 24 h after infusion, time of symptom appearance and disappearance was recorded, and the grade of response was determined. Moreover, blood pressure and heart rates were tested by the machine of Bp-98E, blood samples of animals were collected before infusion and at 10 min after ending infusion for measuring histamine content in plasma using ELISA. Then the sensitization effect was comprehensively estimated by combined consideration of the responding grade and histamine level. Typical symptoms of anaphylactoid reactions were found in sample 3 group, atypical symptoms were found in other polysorbate 80 groups. Different degrees of heart rate speeding and blood pressure downing were found in polysorbate 80 groups. No over 1-fold increase of plasma histamine level was found in all groups. The atypical anaphylactoid reactions and blood pressure of sample 2 group was lighter than other polysorbate 80 groups. Estimation showed that the sample 3 induced the suspicious anaphylactoid reactions, other test solutions did not induce the typical anaphylactoid reactions on Beagle dogs. For allergies and other special populations, there is still a certain risk to applicate polysorbate 80 in the concentration of 0.5%. Production process of polysorbate 80 have a certain influence on allergenicity, refined polysorbate 80 increase the security, but further reasearchs are needed to confirmed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Solehudin, Agus, E-mail: asolehudin@upi.edu; Nurdin, Isdiriayani
2014-03-24
Corrosion and inhibition studies on API 5LX65 carbon steel in chloride solution containing various concentrations of benzotriazole has been conducted at temperature of 70°C using Electrochemical Impedance Spectroscopy (EIS). Corroded carbon steel surface with and without inhibitor have been observed using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Energy Dispersive Spectroscopy (EDS). The objectives of this research are to study the performance of benzotriazole as corrosion inhibitors. The experimental results of carbon steel corrosion in 3.5% NaCl solution containing 500 mg/l H{sub 2}S at different BTAH concentrations showed that corrosion rate of carbon steel decreases with increasing of BTAHmore » concentrations from 0 to 10 mmol/l. The inhibition efficiency of BTAH was found to be affected by its concentration. The optimum efficiency obtained of BTAH is 93% at concentration of 5 mmol/l. The result of XRD and EDS analysis reveal the iron sulfide (FeS) formation on corroded carbon steel surface without inhibitor. The EDS spectrum show the Nitrogen (N) bond on carbon steel surface inhibited by BTAH.« less
Liu, Yu; Yang, Juan; Tuo, Yang-ling; Wei, Ting; Zeng, Yong; Wang, Ping; Meng, Xian-li
2015-10-01
To establish an HPLC-MS/MS method for the analysis of quercetin, kaempferid and isorhamnetin in rats plasma and study its pharmamacokinetics after an intragastrical administration of Hippophae rhamnoides extracts. Five healthy male Sprague-Dawley (SD) rats were given single doses of H. rhamnoides extracts (quercetin 26.35 mg x kg(-1), kaempferid 4.040 mg x kg(-1), isorhamnetin 31.37 mg x kg(-1)), and then their orbital sinus blood samples were collected at different time points. The drug plasma concentration of the three flavonoids was determined by HPLC-MS/MS method. After that, the main pharmacokinetics parameters were calculated by using Kinetica 5. 0. 11 software. The methodological test showed that the linear concentration ranges of quercetin, kaempferid and isorhamnetin were 7.500-600.0 μg x L(-1) (R2 = 0.998 5), 1.000-80.00 μg x L(-1) (R2 = 0.998 5 ) and 10.00-800.0 μg x L(-1) (R2 = 0.998 0), respectively. The inner and inter-days precisions were both less than 14.0%. The plasma samples showed a good stability and consistency with the requirement of biological sample analysis after the samples were frozen once and placed at - 20 degrees C for 15 d and room temperature for 6 h and the treated analytes were placed at -20 degrees C for 24 h. For quercetin, the pharmacokinetic parameter t(½β), AUC(0-∞), MRT(0.∞), C.(max) and T(max) were (113.3 ± 19.37) min, (12 542.14 ± 3 504.05) μg x h x L(-1), (119.6 ± 13.29) h, (164.6 ± 27.33) μg x L(-1) and (5.199 ± 0.840 3) h, respectively. For kaempferid, the pharmacokinetic parameters t(½β), AUC(0-t), MRT(0-∞), C(max) and T(max) were (79.85 ± 17.15) min, (934.51 ± 94.59) μg x h x L(-1), (81.50 ± 13.75) h, (80.15 ± 14.24) μg x L(-1) and (3.827 ± 0.902 7) h, respectively. For isorhamnetin, the pharmacokinetic parameters t1,2,, AUC(0-t), MRT(0-∞), C(max) and T(max) were (118.3 ± 20.73) min, (26 067.77 ± 4 124.60) μg x h x L(-1), (129.0 ± 16.30) h, (269.6 ± 29.32) μg x L(-1) and (6.513 ± 1.450) h, respectively. The HPLC-MS/MS analysis method established in this study was proved to be sensitive and accurate and could be applied in the pharmacokinetic study of quercetin, kaempferid and isorhamnetin in rat plasma.
DC-7B Aircraft Spray System for Large-Area Insect Control
1975-11-01
the ground. The two inert aerosol samnplers used were a 2.5-inch-diameter can wrapped with Printflex-card stock and a 2-mm-diameter pipe cleaner. The...mph (i to 6 m/sec). (2) One inert aerosol sampler (can wrapped with Printflex- card stock ) was positioned 20, 40, 60, and 80 meters above terrain on...4.040x105 2.174x105 9.195x104 2.950x105 1. 035x10 5 ETf 0.501 0.927 1.00 0.501 0.501 L (m) 1.408x104 7.376x103 7.488x103 1.028x104 8.662x103 H (i) 15
Bai, S; Hua, L; Wang, X; Liu, Q; Bao, Y
2018-05-11
Asthma is a complex and heterogeneous disease. We found that gene-gene interactions among IL13 rs20541, IL4 rs2243250, ADRB2 rs1042713, and FCER1B rs569108 in asthmatic children of Chinese Han nationality. This four-locus set constituted an optimal statistical interaction model. Objective: This study examined associations of the four-gene model consisting of IL13, IL4, FCER1B, and ADRB2 with the Asthma Predictive Index (API) and atopy in Chinese Han children. Four single-nucleotide polymorphisms (SNPs) in the four genes were genotyped in 385 preschool children with wheezing symptoms using matrix-assisted laser desorption ionization time-of-flight mass spectrometry. Student's t test and x2 tests were used for this analysis. : Significant correlations were found between the four-locus gene model and the stringent and loose API (both P<0.0001). Additionally, a high-risk asthma genotype was a risk factor for the positive API (stringent API: OR= 4.08, loose API: OR=2.36). We also found a statistically significant association of the four-locus gene model with atopy (P<0.01, OR= 2.09). Our results indicated that the four-locus gene model consisting of L13 rs20541, IL4 rs2243250, ADRB2 rs1042713 and FCER1B rs569108 was associated with the API and atopy. These findings provide an evidence of the gene model for determining a high risk of developing asthma and atopy in Chinese Han children.
Microbiological quality of drinking water from dispensers in roadside restaurants of Bangladesh.
Moniruzzaman, M; Akter, S; Islam, M A; Mia, Z
2011-01-15
The microbiological status of water from dispensers in different roadside restaurants of Dhaka city and Savar area was analyzed in this study. Seven samples from Dhaka and 8 samples of Savar were checked. The heterotrophic plate count was in a range of 1.0 x 10(3) CFU mL(-1) to 2.0 x 10(4) CFU mL(-1) (from new bottles), 1.0 x 10(3) to 1.5 x 10(4) CFU mL(-1) (after dispensation), and 1.5 x 10(3) CFU mL(-1) to 1.0 x l0(5) CFU mL(-1) (from serving glass). In several of the samples, the heterotrophic plate count was higher than the count in water from new bottle or after dispensation, suggesting added contamination from the serving glass. 80% of the samples were contaminated with total and fecal coliform bacteria, which render these waters unacceptable for human consumption. The samples were found to contain gram negative bacteria like E coli, Shigella sp., Klebsiella sp., Enterobacter sp., Pseudomonas sp., and Salmonella sp., which are potential pathogens and thus pose a serious threat to public health. This study elucidates the importance of monitoring the bottling companies and the restaurants and put them under strict regulations to prevent future outbreak of any water borne diseases caused by consumption of dispensed water.
Anaerobic Decolorization and Detoxification of Cationic Red X-GRL by Shewanella oneidensis MR-1.
Li, Qian; Feng, Xiao-Li; Li, Ting-Ting; Lu, Xue-Rong; Liu, Qiu-Yue; Han, Xue; Feng, Yu-Jie; Liu, Zhao-Ying; Zhang, Xi-Jia; Xiao, Xiang
2017-07-14
The ability of a electrochemically active bacterium, Shewanella oneidensis MR-1, to decolorize azo dye cationic red X-GRL (X-GRL) was investigated. S. oneidensis MR-1 showed a high decolorization capability for X-GRL under anaerobic conditions. The Mtr respiratory pathway was proved to be involved in the extracellular decolorization of X-GRL. The decolorization efficiency of S. oneidensis MR-1 was significantly inhibited when initial X-GRL concentration was over 200 mg L -1 . Increasing the inoculum volume of S. oneidensis MR-1 could obviously promote the X-GRL decolorization. The 100 mg L -1 X-GRL and 6% (v/v) inoculum volume were chosen as the optimal parameter. Under such a condition, almost all of X-GRL (100 mg L -1 ) could be completely reduced after 12-h incubation at the pH range of 5.5∼8.0 and temperature range of 30∼40 °C. Salinity in the medium also affected X-GRL decolorization. Lactate and citric acid were found to be the suitable electron donors for X-GRL decolorization. Although the genotoxicity increased slightly, the phytotoxicity of X-GRL in the decolorization process was significantly reduced by S. oneidensis MR-1.
Design and Industrial Production of Frequency Standards in the USSR
1990-12-01
VNIIFTRI ), the measurement data, taken in January-May interval of 1990, the frequency drift of four CHI-80 instruments was less than 1 x 10-l6 per day13...hydrogen keeper specifications received by VNIIFTRI . The frequency reproducibility is 5 x 10-l4 for the measurement interval up to 16 hours[16]. At...in hydrogen maser in new materials Proc. VNIIFTRI Issledovarliya v oblasty izmereny vremeny i chastoty. Moscow, 1978, v.37(67), P.81-85 2. S.B
Summary of Structural Evaluation and Design Support for the Underground Nuclear Test Program.
1979-07-01
consider using API -5LX pipe as this pipe has been shown to have high ductility (better than A36). This pipe comes in several grades (X42, X46, X52 , X56, X60...X65, X70) with the grade number representing the yield strength (ksi) of the steel. Grades X42 and X52 are readily available while the higher yield...strength steels are less readily available. I believe X52 has certainly a high enough yield strength (52,000 psi) for your application and that even
Lestremau, François; Cooper, Andrew; Szucs, Roman; David, Frank; Sandra, Pat
2006-03-24
High plate numbers were obtained in conventional LC by coupling columns and by using temperature to reduce the viscosity of the mobile phase. At 80 degrees C up to eight columns of 25 cm x 4.6 mm I.D. packed with 5 microm ODS particles could be coupled generating 180,000 effective plates while the pressure drop was only 350bar. For routine work, a set of four columns is preferred. The analysis times on one column operated at 30 degrees C and 1 mL/min flow rate and on four columns at 80 degrees C and 2 mL/min flow rate are the same in isoeluotropic conditions while the resolution is doubled. Multicolumn systems were successfully applied in isocratic and gradient mode for the analysis of pharmaceutical and environmental samples.
Plasma L-5-oxoproline carbon and nitrogen kinetics in healthy young adults.
Metges, C C; Yu, Y M; Cai, W; Lu, X M; Wong, S; Ajami, A M; Young, V R
1999-11-01
L-5-oxoproline (OP), an intermediate of the gamma-glutamyl cycle of glutathione synthesis and degradation, may serve as a probe for the state of glutathione kinetics. We explored the whole-body carbon and nitrogen kinetics of OP in five male healthy subjects (75.2 kg; 181 cm; 26 y) after a 5-d adaptation to an adequate L-amino acid-based diet (160 mg N x kg(-1) x d(-1); 188 kJ x kg(-1) x d(-1)), using a crossover design. On day 6 of the diet period, we carried out an 8-h tracer protocol (3 h fast; 5 h fed; 2/3 of daily nitrogen intake) with intravenous infusion of L-[1-(13)C]oxoproline and L-[3, 3-(2)H]cysteine or, in randomized order, on the second occasion, L-[(15)N]oxoproline and L-[3,3-(2)H]cysteine. Plasma OP was isolated by cation exchange and after addition of internal standards (DL-[(2)H(3)]-5-oxoproline; L-[(15)N, U-(13)C(5)]-5-oxoproline; DL-[(2)H(3)]-glutamic acid) derivatized to form TBDMS esters and measured by gas chromatography/mass spectrometry. Plasma OP concentration did not differ between fed and fasted state (fast: 59. 4 +/- 8.3; fed 59.2 +/- 8.9 nmol/mL). (13)C- and (15)N OP flux during the fasted and fed state were 19 +/- 3.6, 21.2 +/- 3.2, and 22.6 +/- 3.9, 25.8 +/- 4.3 micromol x kg(-1) x 30 min(-1), respectively. OP oxidation was 15.6 +/- 3.6 and 17.9 +/- 3.5 micromol x kg(-1) x 30 min(-1), in fasting and feeding, respectively, (P < 0.05). More than 80% of the plasma flux was oxidized. These findings are compared with the published literature on GSH turnover in plasma of human subjects and underscore the need to define more completely the dynamic aspects of glutathione metabolism and of the intermediates of the gamma-glutamyl cycle.
Ludvigsen, Jane; Porcellato, Davide; Amdam, Gro V; Rudi, Knut
2018-05-01
The gut microbiota of honeybees (Apis) and bumblebees (Bombus) include the symbiotic bacterial genus Gilliamella. This genus shows a high degree of functional and genomic diversity and separates into distinct lineages. Gilliamella apicola wkB1 T , which was isolated from Apis, was the first species to be described. Recently four new species, isolated from Bombus, were identified. In this paper, we compare several genomes/strains from previous studies spanning this diversity, which gives insight into the phylogenetic relationship among different Gilliamella species. We show that one lineage, isolated only from Apis, is different from other gilliamellas described, based on average nucleotide identity calculation (about 80 %) and phenotypic characterizations. We propose the new species name for this lineage: Gilliamella apis sp. nov. We present the characterization of the type strain NO3 T (=DSM 105629 T =LMG 30293 T ), a strain isolated from the Western honeybee Apis mellifera, which clusters within this lineage. Cells of strain NO3 T grow best in a microaerophilic atmosphere with enhanced CO2 levels at 36 °C and pH 7.0-7.5. Cells also grow well in anaerobic conditions, but not in aerobic conditions. Cells are approximately 1 µm in length and rod-shaped, and the genomic G+C content is 34.7 mol%. Differential characteristics between strain NO3 T and the different type strains of Gilliamella were revealed based on API kit tests and genomic content comparisons. The main respiratory quinone of strain NO3 T was ubiquinone-8, and the predominant fatty acids were C18 : 1ω7c/C18 : 1ω6c, C16 : 0, consistent with the genus Gilliamella.
Experience API: Flexible, Decentralized and Activity-Centric Data Collection
ERIC Educational Resources Information Center
Kevan, Jonathan M.; Ryan, Paul R.
2016-01-01
This emerging technology report describes the Experience API (xAPI), a new e-learning specification designed to support the learning community in standardizing and collecting both formal and informal distributed learning activities. Informed by Activity Theory, a framework aligned with constructivism, data is collected in the form of activity…
González-Olvera, Rodrigo; Román-Rodríguez, Viridiana; Negrón-Silva, Guillermo E; Espinoza-Vázquez, Araceli; Rodríguez-Gómez, Francisco Javier; Santillan, Rosa
2016-02-22
An efficient one-pot synthesis of 1,2,3-triazole derivatives of dihydropyrimidinones has been developed using two multicomponent reactions. The aldehyde-1,2,3-triazoles were obtained in good yields from in situ-generated organic azides and O-propargylbenzaldehyde. The target heterocycles were synthesized through the Biginelli reaction in which the aldehyde-1,2,3-triazoles reacted with ethyl acetoacetate and urea in the presence of Ce(OTf)₃ as the catalyst. The corrosion inhibition of steel grade API 5 L X52 in 1 M HCl by the synthesized compounds was investigated using the electrochemical impedance spectroscopy technique. The measurements revealed that these heterocycles are promising candidates to inhibit acidic corrosion of steel.
In Vivo Efficacy and Pharmacokinetics of Optimized Apidaecin Analogs
NASA Astrophysics Data System (ADS)
Schmidt, Rico; Knappe, Daniel; Wende, Elisabeth; Ostorházi, Eszter; Hoffmann, Ralf
2017-03-01
Proline-rich antimicrobial peptides (PrAMPs) represent promising alternative therapeutic options for the treatment of multidrug-resistant bacterial infections. PrAMPs are predominantly active against Gram-negative bacteria by inhibiting protein expression via at least two different modes of action, i.e., blocking the ribosomal exit tunnel of 70S ribosomes (oncocin-type binding) or inhibiting the assembly of the 50S ribosomal subunit (apidaecin-type binding). The in vivo efficacy and favorable biodistribution of oncocins confirmed the therapeutic potential of short PrAMPs for the first time, whereas the in vivo evaluation of apidaecins is still limited despite the promising efficacy of apidaecin-analog Api88 in an intraperitoneal murine infection model. Here, the in vivo efficacy of apidaecin-analog Api137 was studied, which rescued all NMRI mice from a lethal intraperitoneal infection with E. coli ATCC 25922 when administered three times intraperitoneal at doses of 0.6 mg/kg starting one hour after infection. When Api88 and Api137 were administered intravenous or intraperitoneal at doses of 5 and 20 mg/kg, their plasma levels were similarly low (<3 µg/mL) and fourfold lower than for oncocin-analog Onc72. This contradicted earlier expectation based on the very low serum stability of Api88 with a half-life time of only 5 min compared to 6 hrs and 3 hrs for Api137 and Onc72, respectively. Pharmacokinetic data relying on a sensitive mass spectrometry method utilizing multiple reaction monitoring and isotope-labeled peptides revealed that Api88 and Api137 were present in blood, urine, and kidney, and liver homogenates at similar levels accompanied by the same major metabolites comprising residues 1-16 and 1-17. The pretended discrepancy was solved, when all peptides were incubated in peritoneal lavage. Api137 was rapidly degraded at the C-terminus, while Api88 was rather stable despite releasing the same degradation products. Onc72 was very stable explaining its higher plasma levels compared to Api88 and Api137 after intraperitoneal administration illuminating its good in vivo efficacy. The data indicate that the degradation of therapeutic peptides should be studied in serum and further body fluids. Moreover, the high efficacy in murine infection models and the fast clearance of Api88 and Api137 within 60 min after intravenous and 90 min after intraperitoneal injections indicate that
Nuvagah Forti, L; Van Roie, E; Njemini, R; Coudyzer, W; Beyer, I; Delecluse, C; Bautmans, I
2017-01-01
Previously we showed that 12 weeks of mixed-low resistance training (LOW+) significantly increased circulating BDNF in older male individuals. To examine the impact of 24 weeks detraining on circulating BDNF. Randomized intervention study. Community-dwelling older adults. Forty-seven out of 56 participants stopped training (detraining) after 12 weeks of resistance exercise (3x/week) at either HIGH-resistance (5 Males, 5 Females, 2x10-15 repetitions at 80%1RM), LOW-resistance (6 Males, 7 Females, 1x80-100 repetitions at 20%1RM), or mixed-low LOW+-resistance (6 Males, 8 Females, 1x60 repetitions at 20%1RM followed by 1x10-20 repetitions at 40%1RM), of whom 37 (aged 68±5 years) provided sufficient serum samples for BDNF analysis at baseline, 12 week and at 36 weeks (24 weeks detraining). BDNF had initially increased by 31% (from 33.4±10.9 ng/mL to 44.5±13.2 ng/mL, p=0.005) after 12 weeks in the LOW+ exercise group in males and decreased by 26% (from 44.5±13.2 ng/mL to 32.9±10.7 ng/mL) after detraining, though not statistically significant (p=0.082). In females, no significant change in BDNF was found in any of the intervention groups (p>0.05), neither after training, nor detraining. At 36 weeks all of the subgroups showed BDNF levels comparable (all p>0.10) to baseline (before the exercise intervention). Our results show that a 12-weeks LOW+ resistance exercise increases circulating BDNF in older male subjects but that this reduces back to baseline levels after 24 weeks of detraining. Continuous exercise adherence seems to be needed to sustain the training-induced effects on BDNF in older persons. Additional studies are needed to unravel the underlying mechanisms, as well as to confirm the observed sex difference.
NASA Astrophysics Data System (ADS)
Chávez-Gonzalez, A. F.; Martínez-Ortiz, P.; Pérez-Benítez, J. A.; Espina-Hernández, J. H.; Caleyo, F.
2018-01-01
This work analyzes the differences between the magnetic Barkhausen noise corresponding to the initial magnetization curve and Barkhausen noise corresponding to one branch of the hysteresis loop in API-5L steel. The outcomes show that the Barkhausen noise signal corresponding to the initial magnetization curve and that corresponding to the hysteresis are significantly different. This difference is due to the presence of different processes of the domain wall dynamics in both phenomena. To study the processes present in magnetization dynamics for an applied field of H > 0, research into the angular dependence of a Barkhausen signal using applied field bands has revealed that a Barkhausen signal corresponding to the initial magnetization curve is more suitable than a Barkhausen signal corresponding to the hysteresis loop.
Avdeef, Alex
2017-12-15
A novel general computational approach is described to address many aspects of cocrystal (CC) solubility product (K sp ) determination of drug substances. The CC analysis program, pDISOL-X, was developed and validated with published model systems of various acid-base combinations of active pharmaceutical ingredients (APIs) and coformers: (i) carbamazepine cocrystal systems with 4-aminobenzoic acid, cinnamic acid, saccharin, and salicylic acid, (ii) for indomethacin with saccharin, (iii) for nevirapine with maleic acid, saccharin, and salicylic acid, and (iv) for gabapentin with 3-hydroxybenzoic acid. In all systems but gabapentin, the coformer is much more soluble than the API. The model systems selected are those with available published dual concentration-pH data, one set for the API and one set for the coformer, generally measured at eutectic points (thermodynamically-stable three phases: solution, cocrystal, and crystalline API or coformer). The carbamazepine-cinnamic acid CC showed a substantial elevation in the API equilibrium concentration above pH5, consistent with the formation of a complex between carbamazepine and cinnamate anion. The analysis of the gabapentin:3-hydroxybenzoic acid 1:1 CC system indicated four zones of solid suspensions: coformer (pH<3.25), coformer and cocrystal eutectic (pH3.25-4.44), cocrystal (pH4.44-5.62), and API (pH>5.62). The general approach allows for testing of many possible equilibrium models, including those comprising drug-coformer complexation. The program calculates the ionic strength at each pH. From this, the equilibrium constants are adjusted for activity effects, based on the Stokes-Robinson hydration theory. The complete speciation analysis of the CC systems may provide useful insights into pH-sensitive dissolution effects that could potentially influence bioavailability. Copyright © 2017 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Shin, Sang Yong; Woo, Kuk Je; Hwang, Byoungchul; Kim, Sangho; Lee, Sunghak
2009-04-01
The fracture toughness in the transition-temperature region of three American Petroleum Institute (API) X70 and X80 pipeline steels was analyzed in accordance with the American Society for Testing and Materials (ASTM) E1921-05 standard test method. The elastic-plastic cleavage fracture toughness ( K Jc ) was determined by three-point bend tests, using precracked Charpy V-notch (PCVN) specimens; the measured K Jc values were then interpreted by the three-parameter Weibull distribution. The fracture-toughness test results indicated that the master curve and the 98 pct confidence curves explained the variation in the measured fracture toughness well. The reference temperatures obtained from the fracture-toughness test and index temperatures obtained from the Charpy impact test were lowest in the X70 steel rolled in the two-phase region, because this steel had smaller effective grains and the lowest volume fraction of hard phases. In this steel, few hard phases led to a higher resistance to cleavage crack initiation, and the smaller effective grain size led to a higher possibility of crack arrest, thereby resulting in the best overall fracture properties. Measured reference temperatures were then comparatively analyzed with the index temperatures obtained from the Charpy impact test, and the effects of microstructures on these temperatures were discussed.
Synthesis, characterization and dissolution of three pharmaceutical cocrystals based on deferiprone
NASA Astrophysics Data System (ADS)
Zhang, Xiaoming; Tian, Yuyang; Jia, Jiangtao; Zhang, Tingting; Zhu, Guangshan
2016-03-01
In this paper we present three new cocrystals based on deferiprone which is the first oral medicine as iron chelator. Solitary deferiprone possesses some known problems due to its good solubility and frequent dosing side effects. For these three novel co crystals, deferiprone is the active pharmaceutical ingredient (API), p-hydroxybenzoic acid (1, C7H9NO2·C7H6O3), 2, 5-dihydroxybenzoic acid (2, C7H9NO2·C7H6O4) and maleic acid (3, C7H9NO2·C4H4O4) are used as cocrystal formers (CCFs), respectively. Their structures were characterized by single crystal X-ray diffraction, powder X-ray diffraction (PXRD) analysis, thermogravimetric analyses (TGA), differential thermal analysis (DTA), elemental analysis (EA) and infrared spectral analysis (IR). Single crystal X-ray diffraction demonstrates that all three cocrystals (1-3) possess strong hydrogen-bondings assembled through hydroxyl of API and carboxylic acids of CCFs. The PXRD results indicate their high purity of as-synthesized samples. TGA, DTA, EA, IR and dissolution study of API and cocrystals were also measured and discussed, respectively. The results suggest that the cocrystals exhibit low dissolution rates comparing with solitary deferiprone, which is very advantageous for the oral medicine with frequent dosing side effects.
2007-12-04
emitting diodes 6. Optical and material characterization of ZnO nanostructures 7. Fabrication of anodized - aluminum - oxide ( AAO ) ? preparing for patterned...Using InGaN for improving the efficiency of solar cell Theme: MOCVD and MBE growths of nitride and oxide semiconductor nanostructures for energy...0 20 40 60 80 100 120 P L E n h a n c e m e n t R a t i o Wavelength (nm) Silver -- 13X Gold --4X Aluminum -- 10X 0.0 0.5 1.0 1.5 2.0 2.5 I n
Testicular volume measurement: comparison of ultrasonography, orchidometry, and water displacement.
Sakamoto, Hideo; Saito, Katsuyuki; Oohta, Michiya; Inoue, Katuki; Ogawa, Yoshio; Yoshida, Hideki
2007-01-01
To determine the accuracy of orchidometry and ultrasonography for measuring the testicular volume by comparing the resultant measurements with the actual testicular volume in humans. The testicular volume of 40 testes from 20 patients with prostate cancer (mean age +/- SD 74.5 +/- 7.5 years) was measured using the Prader orchidometer and ultrasonography before therapeutic bilateral orchiectomy. The ultrasound measurements of testicular volume were calculated using three formulas: length (L) x width (W) x height (H) x 0.52, L x W2 x 0.52, and L x W x H x 0.71. The actual testicular volumes were determined by water displacement of the surgical specimen. The mean actual testicular volume of the 40 testes was 9.3 cm3 (range 2.5 to 23.0). A strong correlation was found between the testicular volume calculated by the three ultrasound formulas and the actual volume (r = 0.910 to 0.965, P <0.0001) and was stronger than the correlation with the Prader orchidometer (r = 0.818, P <0.0001). The smallest mean difference from the actual testicular volume was observed with the formula L x W x H x 0.71, which overestimated the actual volume by 0.80 cm3 (7.42%). The measurements using the Prader orchidometer correlated with the actual testicular volume and with the testicular volume calculated using the three ultrasound formulas (r = 0.801 to 0.816, P <0.0001). However, the orchidometer measurements had the largest mean difference from the actual testicular volume (6.68 cm3, 81.7%). The results of this study have shown that measuring the testicular volume by ultrasonography is more accurate than by the Prader orchidometer, and the formula L x W x H x 0.71 was the most accurate for calculating the testicular volume.
Measurement of testicular volume in smaller testes: how accurate is the conventional orchidometer?
Lin, Chih-Chieh; Huang, William J S; Chen, Kuang-Kuo
2009-01-01
The aim of this study was to evaluate the accuracy of different methods, including the Seager orchidometer (SO) and ultrasonography (US), for assessing testicular volume of smaller testes (testes volume less than 18 mL). Moreover, the equations used for the calculations--the Hansen formula (length [L] x width [W](2) x 0.52, equation A), the prolate ellipsoid formula (L x W x height [H] x 0.52, equation B), and the Lambert equation (L x W x H x 0.71, equation C)--were also examined and compared with the gold standard testicular volume obtained by water displacement (Archimedes principle). In this study, 30 testes from 15 men, mean age 75.3 (+/-8.3) years, were included. They all had advanced prostate cancer and were admitted for orchiectomy. Before the procedure, all the testes were assessed using SO and US. The dimensions were then input into each equation to obtain the volume estimates. The testicular volume by water displacement was 8.1 +/- 3.5 mL. Correlation coefficients (R(2)) of the 2 different methods (SO, US) to the gold standard were 0.70 and 0.85, respectively. The calculated testicular volumes were 9.2 +/- 3.9 mL (measured by SO, equation A), 11.9 +/- 5.2 mL (measured by SO, equation C), 7.3 +/- 4.2 mL (measured by US, equation A), 6.5 +/- 3.3 mL (measured by US, equation B) and 8.9 +/- 4.5 mL (measured by US, equation C). Only the mean size measured by US and volume calculated with the Hansen equation (equation A) and the mean size measured by US and volume calculated with the Lambert equation (equation C) showed no significant differences when compared with the volumes estimated by water displacement (mean difference 0.81 mL, P = .053, and 0.81 mL, P = .056, respectively). Based on our measurements, we categorized testicular volume by different cutoff values (7.0 mL, 7.5 mL, 8.0 mL, and 8.5 mL) to calculate a new constant for use in the Hansen equation. The new constant was 0.59. We then reexamined the equations using the new 0.59 constant, and found that the equation Volume (V) = L x W(2) x 0.59 was the best for describing testicular volume among our subjects (difference between the new equation and the gold standard of water displacement = 0.19 mL, P = .726). We also found that US was more precise in measuring testicular dimensions. We propose a new formula, V = L x W(2) x 0.59, to assess the volumes of smaller testes.
ERIC Educational Resources Information Center
Levin, Jesse; Haertel, Edward; Kirst, Michael; Williams, Trish
2006-01-01
This research project surveyed 80% of the K-5 classroom teachers (over 5,500) and every principal at 257 elementary schools in California serving large percentages of low-income, minority, and English Learner students. Specifically, 98% percent of the schools in the sample qualified for Title I funding. The goal was to identify which specific…
Kamalzadeh, Zahra; Babanezhad, Esmaeil; Ghaffari, Solmaz; Mohseni Ezhiyeh, Alireza; Mohammadnejad, Mahdieh; Naghibfar, Mehdi; Bararjanian, Morteza; Attar, Hossein
2017-08-01
A new, normal phase high performance liquid chromatography (NP-HPLC) method was developed for separation of Bortezomib (BZB) enantiomers and quantitative determination of (1S,2R)-enantiomer of BZB in active pharmaceutical ingredient (API) samples. The developed method was validated based on International Conference on Harmonisation (ICH) guidelines and it was proved to be accurate, precise and robust. The obtained resolution (RS) between the enantiomers was more than 2. The calibration curve for (1S,2R)-enantiomer was found to be linear in the concentration range of 0.24-5.36 mg/L with regression coefficient (R2) of 0.9998. Additionally, the limit of detection (LOD) and limit of quantification (LOQ) were 0.052 and 0.16 mg/L, respectively. Also, in this study, a precise, sensitive and robust gradient reversed-phase HPLC (RP-HPLC) method was developed and validated for determination of BZB in API samples. The detector response was linear over the concentration range of 0.26-1110.5 mg/L. The values of R2, LOD and LOQ were 0.9999, 0.084 and 0.25 mg/L, respectively. For both NP-HPLC and RP-HPLC methods, all of the RSD (%) values obtained in the precision study were <1.0%. System suitability parameters in terms of tailing factor (TF), number of theoretical plates (N) and RS were TF < 2.0, N > 2,000 and RS > 2.0. The performance of two common integration methods of valley to valley and drop perpendicular for drawing the baseline between two adjacent peaks were investigated for the determination of diastereomeric impurity (Imp-D) in the BZB-API samples. The results showed that the valley to valley method outperform the drop perpendicular method for calculation of Imp-D peak areas. Therefore, valley to valley method was chosen for peak integration. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chungbin, S; Fatyga, M
Purpose: To verify that a photon total body irradiation (TBI) calculation method scales properly from adult to pediatric dimensions and to determine TBI in-vivo dosimetry correction factors for diodes and optically stimulated luminescent dosimeters (OSLD's). Methods: TBI technique used is 400 SAD 18 MV opposed laterals with beam spoiler. Water bags are used to supplement narrower lateral dimensions for patient treatments. To verify that dose calculations scale properly with decreasing dimensions, CAX doses were measured and compared to calculations for different rectangular phantom geometries: (L=length(cm), H=height(cm), d=depth(cm)): L(30)xH(30) (d=3-25), L(30)xH(12)(d=2–20), L(13)xH(13) (d=5–13), L(30)x(H=10–40) d=15, L(30–150) x H(10) (d=15). In infantmore » geometry, measured off axis “leg” dose (L(30)xH(2.5–10.6), d=7)) was compared to CAX (“body” L(30)xH(10)(d=7) adjacent to “leg”). Entrance and exit doses were measured with surface diodes, diodes with buildup, OSLD's, as well as ion chambers for comparison. Correction factors ((ion chamber CAX dose)/(in vivo dose)) were calculated for surface diodes, diodes with buildup, OSLD's, and ion chamber. Results: All rectangular phantom measurements agree with calculated within 2.5%. For L(30)xH(30), L(30)xH(12), L(13)xH(13), L(30)x(H=10–40) and L(30–80)xH(10) agreement was within 1%. For the infant geometry, the ratio of leg dose to CAX varies from 0.956 (h=2.5) to 0.995 (h=10.6). The range of in-vivo dosimetry entrance+exit to CAX dose correction factors varied by dosimeter (diode: 0.883–1.015, surface diode: 1.008–1.214, ion chamber: 0.924–1.084, OSLD: 0.920–1.106). Conclusion: TBI calculations scaled properly to pediatric dimensions. In-vivo dosimetry with various detectors demonstrated similar trends with different magnitudes. OSLD measurements agreed well with ion chamber measurements.« less
Students academic performance based on behavior
NASA Astrophysics Data System (ADS)
Maulida, Juwita Dien; Kariyam
2017-12-01
Utilization of data in an information system that can be used for decision making that utilizes existing data warehouse to help dig useful information to make decisions correctly and accurately. Experience API (xAPI) is one of the enabling technologies for collecting data, so xAPI can be used as a data warehouse that can be used for various needs. One software application whose data is collected in xAPI is LMS. LMS is a software used in an electronic learning process that can handle all aspects of learning, by using LMS can also be known how the learning process and the aspects that can affect learning achievement. One of the aspects that can affect the learning achievement is the background of each student, which is not necessarily the student with a good background is an outstanding student or vice versa. Therefore, an action is needed to anticipate this problem. Prediction of student academic performance using Naive Bayes algorithm obtained accuracy of 67.7983% and error 32.2917%.
Effects of C and Si on strain aging of strain-based API X60 pipeline steels
NASA Astrophysics Data System (ADS)
Sung, Hyo Kyung; Lee, Dong Ho; Lee, Sunghak; Lee, Byeong-Joo; Hong, Seung-Pyo; Kim, Young-Woon; Yoo, Jang Yong; Hwang, Byoungchul; Shin, Sang Yong
2017-05-01
Four types of strain-based API X60 pipeline steels were fabricated by varying the C and Si contents, and the effects of C and Si on strain aging were investigated. The 0.05 wt% C steels consisted mainly of polygonal ferrite (PF), whereas the 0.08 wt% C steels consisted of acicular ferrite (AF). The volume fraction of AF increased with increasing C content because C is an austenite stabilizer element. The volume fractions of bainitic ferrite (BF) of the 0.15 wt% Si steels were higher than those of the 0.25 wt% Si steels, whereas the volume fractions of the secondary phases were lower. From the tensile properties before and after the aging process of the strainbased API X60 pipeline steels, the yield strength increased and the uniform and total elongation decreased, which is the strain aging effect. The strain aging effect in the strain-based API X60 pipeline steels was minimized when the volume fraction of AF was increased and secondary phases were distributed uniformly. On the other hand, an excessively high C content formed fine precipitates, and the strain aging effect occurred because of the interactions among dislocations and fine precipitates.
NASA Astrophysics Data System (ADS)
Elramady, Alyaa Gamal
The aim of this research project is to correlate the plastic deformation and mechanical instability of casing steel materials with corrosion behavior and surface change, in order to identify a tolerable degree of deformation for casing steel materials. While the corrosion of pipeline and casing steels has been investigated extensively, corrosion of these steels in sweet environments with respect to plastic deformation due to bending, rolling, autofrettage, or handling needs more investigation. Downhole tubular expansion of pipes (casings) is becoming standard practice in the petroleum industry to repair damaged casings, shutdown perforations, and ultimately achieve mono-diameter wells. Tubular expansion is a cold-drawing metal forming process, which consists of running conical mandrels through casings either mechanically using a piston or hydraulically by applying a back pressure. This mechanism subjects the pipes to large radial plastic deformations of up to 30 pct. of the inner diameter. It is known that cold-working is a way of strengthening materials such as low carbon steel, but given that this material will be subjected to corrosive environments, susceptibility to stress corrosion cracking (SCC) should be investigated. This research studies the effect of cold-work, in the form of cold-rolling and cold-expansion, on the surface behavior of API 5CT steels when it is exposed to a CO2-containing environment. Cold-work has a pronounced influence on the corrosion behavior of both API 5CT K55 and P110 grade steels. The lowest strength grade steel, API 5CT K55, performed poorly in a corrosive environment in the slow strain rate test. The ductile material exhibited the highest loss in strength and highest susceptibility to stress corrosion cracking in a CO 2-containing environment. The loss in strength declined with cold-rolling, which can be ascribed to the surface compressive stresses induced by cold-work. On the other hand, API 5CT P110 grade steels showed higher susceptibility to SCC when they were cold-rolled and cold-expanded. The research found that surface compressive stresses have an effect on the SCC behavior of casing and tubing steels. The CO2 corrosion behavior and atomic processes at the corroding interface were investigated at laboratory temperature using electrochemical techniques. Cold-work was found to have an influence on the corrosion behavior of both API 5CT K55 and P110 grade steels. These behaviors were found to be material and process dependent. Surface evaluation techniques such as field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD) analysis did not detect formation of a protective scale. X-ray diffraction and X-ray photoelectron spectroscopy (XPS) analysis both detected the appearance of a scale that was traced back to magnetite.
IgE-Api m 4 Is Useful for Identifying a Particular Phenotype of Bee Venom Allergy.
Ruiz, B; Serrano, P; Moreno, C
Different clinical behaviors have been identified in patients allergic to bee venom. Compound-resolved diagnosis could be an appropriate tool for investigating these differences. The aims of this study were to analyze whether specific IgE to Api m 4 (sIgE-Api m 4) can identify a particular kind of bee venom allergy and to describe response to bee venom immunotherapy (bVIT). Prospective study of 31 patients allergic to bee venom who were assigned to phenotype group A (sIgE-Api m 4 <0.98 kU/L), treated with native aqueous (NA) extract, or phenotype group B (sIgE-Api m 4 ≥0.98 kU/L), treated with purified aqueous (PA) extract. Sex, age, cardiovascular risk, severity of preceding sting reaction, exposure to beekeeping, and immunological data (intradermal test, sIgE/sIgG4-Apis-nApi m 1, and sIgE-rApi m 2-Api m 4 were analyzed. Systemic reactions (SRs) during bVIT build-up were analyzed. Immunological and sting challenge outcomes were evaluated in each group after 1 and 2 years of bVIT. Phenotype B patients had more severe reactions (P=.049) and higher skin sensitivity (P=.011), baseline sIgE-Apis (P=.0004), sIgE-nApi m 1 (P=.0004), and sIgG4-Apis (P=.027) than phenotype A patients. Furthermore, 41% of patients in group B experienced SRs during the build-up phase with NA; the sting challenge success rate in this group was 82%. There were no significant reductions in serial intradermal test results, but an intense reduction in sIgE-nApi m 1 (P=.013) and sIgE-Api m 4 (P=.004) was observed after the first year of bVIT. Use of IgE-Api m 4 as the only discrimination criterion demonstrated differences in bee venom allergy. Further investigation with larger populations is necessary.
NASA Astrophysics Data System (ADS)
Sari, Shaimah Rinda; Sari, Eli Novita; Rizky, Yoel; Sulistijono, Triana, Yunita
2018-05-01
This research studied the inhibition of corrosion by bawang dayak leaves extract (EleutherineamericanaMerr.) on API 5L steel in brine water environment (3.5% NaCl). The inhibitor was extracted using maceration process from bawang dayak leaves that was cultivated in Paser District, East Kalimantan. The test of antioxidant activity showed that bawang dayak leaves extract is a very powerful antioxidant with IC50 value of 27.30204. The results from FTIR test show the presence of electronegative atoms and double bonds of the alkenes groups that provide the potential of the extract as a corrosion inhibitor. Efficiency of inhibition reached up to 93.158% for the addition of inhibitor with 300 ppm concentration and 20 days of immersion time. This inhibitory behavior is also supported by polarization measurements where the lowest corrosion rate of 0.00128 mm/year is obtained at the same concentration and immersion time.
A ditopic colorimetric sensor for fluoride ion based on thiourea mercury complex.
Sun, Mei-Zhen; Wu, Fang-Ying; Wu, Yu-Mei; Liu, Wen-Ming
2008-12-01
A novel ditopic chromogenic receptor, N-5-(8-hydroxy)quinoline-N'-4'-nitro-phenyl thiourea (1), was synthesized. The metal complex 1-Hg(2+) showed sensitive and highly selective responses to F(-) over other anions such as CH(3)CO(2)(-), H(2)PO(4)(-), HSO(4)(-) and Cl(-). 1-Hg(2+)-F(-) complex formed, which promoted the intramolecular charge transfer and led to a dramatic spectral change. The color of 1-Hg(2+) solution changed from colorless to red upon addition of F(-). Thus, a colorimetric assay of F(-) was developed in acetonitrile by naked-eye detection. F(-) behaved linearly in the 8.0 x 10(-6) to 2.0 x 10(-5) mol L(-1) concentration range with LOD as 1.4 x 10(-6) mol L(-1).
Nomura, Akira; Shin, Shigemitsu; Mehdi, Othman Oulad; Kauffmann, Jean-Michel
2004-09-15
Enzyme-immobilized magnetic microparticles (EMMP) have been prepared for use as a microreactor in flow injection analysis (FI). The microparticles were directly injected into the FI system. Their retention occurred within the flow line by small permanent magnets located near the detector. The analytical utility of this concept was illustrated by the assay of glucose using glucose oxidase (GOx), immobilized microparticles, and amperometric detection of liberated hydrogen peroxide. The microparticles were derived from silica gel (nominal pore diameter, 15-80 nm) by impregnation with a citric acid/ethanol solution and a ferric nitrate/ethanol solution and then by calcination in a nitrogen atmosphere to produce ferrimagnetic fine particles of spinel-type iron oxide (gamma-Fe(2)O(3)) inside the pore. They were characterized by X-ray diffraction. The calibration curve of the glucose sample (2 microL injected) was linear between 2.5 x 10(-6) and 5 x 10(-4) mol/L (R = 0.9995), and the detection limit was 1.0 x 10(-6) mol/L or 0.36 ng of injected glucose (S/N = 3). The repeatability for a 5 x 10(-4) mol/L glucose solution was RSD = 1.5% (n = 6). Application to the assay of glucose in a fermentation broth is illustrated. The GOx MMP were stable and active for more than eight months when kept at 10 degrees C.
[Comparative data regarding two HPLC methods for determination of isoniazid].
Gârbuleţ, Daniela; Spac, A F; Dorneanu, V
2009-01-01
For the determination of isoniazide (isonicotinic acid hydrazide - HIN) two different HPLC methods were developed and validated. Both experiments were performed using a Waters 2695 liquid chromatograph and a UV - Waters 2489 detector. The first method (I) used a Nucleosil 100-10 C18 column (250 x 4.6 mm), a mobile phase formed by a mixture of acetonitrile/10(-2) M oxalic acid (80/20) and a flow of 1.5 mL/ min; detection was done at 230 nm. The second method (II) used a Luna 100-5 C18 column (250 x 4.6 mm), a mobile phase formed by a mixture of methanol/acetate buffer, pH = 5.0 (20/ 80), a flow of 1 mL/min; detection was done at 270 nm. Both methods were validated, the correlation coefficients were 0.9998 (I) and 0.9999 (II), the detection limits were 0.6 microg/mL (I) and 0.055 microg/mL (II), the quantitation limits were 1.9 microg/mL (I) and 0.2 microg/ mL (II). There were also studied: the system precision (RSD = 0.1692% (I) and 0.2000% (II)), the method precision (RSD = 1.1844% (I) and 0.6170% (II)) and the intermediate precision (RSD = 1.8058% (I) and 0.5970% (II)). The accuracy was good, the calculated recoveries were 102.66% (I) and 101.36 (II). Both validated methods were applied for HIN determination from tablets with good and comparable results.
Heidinger, Ina Monika Margret; Meixner, Marina Doris; Berg, Stefan; Büchler, Ralph
2014-01-01
We used radio-frequency identification (RFID) to record the duration and frequency of nuptial flights of honey bee queens (Apis mellifera carnica) at two mainland mating apiaries. We investigated the effect of a number of factors on flight duration and frequency: mating apiary, number of drone colonies, queen’s age and temperature. We found significant differences between the two locations concerning the number of flights on the first three days. We also observed an effect of the ambient temperature, with queens flying less often but longer at high temperatures compared to lower temperatures. Increasing the number of drone colonies from 33 to 80 colonies had no effect on the duration or on the frequency of nuptial flights. Since our results agree well with the results of previous studies, we suggest RFID as an appropriate tool to investigate the mating behavior of honey bee queens. PMID:26462822
Analysis of gene expression profiles of CR80, a neuroprotective 1,8-Naphthyridine.
Ramos, Eva; Romero, Alejandro; Egea, Javier; Marco-Contelles, José; Del Pino, Javier; de Los Ríos, Cristóbal
2018-06-01
The 1,8-naphthyridine CR80 (ethyl 5-amino-2-methyl-6,7,8,9-tetrahydrobenzo[b] [1,8]naphthyridine-3-carboxylate) has shown interesting neuroprotective properties in in vitro and in vivo models of neurodegeneration. In spite of these promising outcomes, the molecular and cellular mechanisms underlying CR80 actions need to be further explored. We herein report the signal transduction pathways involved in developmental, neuroprotective and stress-activated processes, as well as the gene expression regulation by CR80 in SH-SY5Y neuroblastoma cells. The CR80 exposure upregulated several antioxidant enzymes (HO-1, GSR, SQSTM1, and TRXR1) and anti-apoptotic proteins (Bcl-xL, Bcl-2, P21, and Wnt6). The observed changes in gene expression would afford new insights on the neuroprotective profile of CR80.
Quality of water sources used as drinking water in a Brazilian peri-urban area.
Razzolini, Maria Tereza Pepe; Günther, Wanda Maria Risso; Peternella, Francisca Alzira Dos Santos; Martone-Rocha, Solange; Bastos, Veridiana Karmann; Santos, Thaís Filomena da Silva; Cardoso, Maria Regina Alves
2011-04-01
The objective of this paper was to assess bacteriological quality of drinking water in a peri-urban area located in the Metropolitan Region of São Paulo, Brazil. A total of 89 water samples were collected from community plastic tanks and 177 water samples from wells were collected bimonthly, from September 2007 to November 2008, for evaluating bacteriological parameters including: Escherichia coli, Enterococcus and heterotrophic plate count (HPC). Clostridium perfringens was investigated in a subsample (40 samples from community plastic tank and 40 from wells). E. coli was present in 5 (5.6%) samples from community plastic tanks (2.0 - 5.1x10(4) MPN/100mL) and in 70 (39.5%) well samples (2.0 - 8.6x10(4) MPN/100mL). Thus, these samples were not in accordance with the Brazilian Regulation. Enterococcus was detected in 20 (22.5%) samples of the community plastic tanks (1 to 79 NC/100mL) and in 142 (80.2%) well samples (1 to >200 NC/100mL). C. perfringens was detected in 5 (12.5%) community plastic tanks samples and in 35 (87.5%) wells samples (2.2 to >16 MPN/100mL). HPC were above 500 CFU/mL in 5 (5.6%) waters from community plastic tanks. In wells samples, the HPC ranged from <1 to 1.6x10(4) CFU/mL. The residual chlorine did not attend the standard established in the drinking water legislation (0.2 mg/L), except in 20 (22.5%) samples. These results confirm the vulnerability of the water supply systems in this peri-urban area what is clearly a public health concern.
Training and overtraining markers in selected sport events.
Hartmann, U; Mester, J
2000-01-01
Varieties of symptoms are supposed to detect overtraining (OT). Besides the problems of diagnosis and analysis in elite athletes, a daily monitoring of training status takes place with measurement of the parameters serum urea (SU) and serum creatine kinase (CK); therefore, their meaningfulness will be examined, with special respect inter- and intra-individually. Data were obtained from determinations during training from athletes in rowing and athletes of international level. For 6981 SU determinations (male, N = 717; female, N = 285), a slightly asymmetric normal distribution was found (male, 80%, 5-7 mmol x L(-1); female, 75%, 4-6 mmol x L(-1)). Values for women were approximately 1.5 mmol x L(-1) lower. Individual variability was enormous; there seems little point in setting fixed value as 8.3 mmol x L(-1) for men and 7.0 mmol x L(-1) for women as a critical limit for OT. CK has also been measured and evaluated in sports as an essential parameter for determination of muscular stress. Frequency distributions of CK in 2790 samples (male, N = 497; female, N = 350) presented an asymmetric normal distribution with distinct trend toward higher values being evident for the range between 100 and 250 U x L(-1). Conspicuously elevated values occurred in the ranges 250-350 U x L(-1) and 1000-2000 U x L(-1). Men's maximal values were 3000 U x L(-1) and 1150 U x L(-1) for women. Individual variability was enormous. Athletes with chronically low CK exhibited mainly low variability; those with chronically higher values exhibited considerable variability. Establishment of both parameters should be useful to determine individual baselines from a large number of samples. Determinations should be made at least every 3 d in standardized conditions. If a large increase is observed in combination with reduced exercise tolerance after a phase of exertion (2-4 d), then the possibility of a catabolic/metabolic activity or insufficient exercise tolerance becomes much more likely.
Fan, Hong-xi; Liu, Ying; Liu, Zhi-pei
2009-08-15
By single factor experiments, the fermentation conditions for cold-adapted amylase production from Micrococcus antarcticus were determined as follows(medium g/L): Na2 HPO4 2.0, KH2PO4 1.0, MgSO4 x 7H2O 0.1, NaCl 5.0, (NH4)2SO4 2.5, maltose 5.0, trace element solution 5.0 mL, pH 8.0, 100 mL/Erlenmeyer flask (500 mL); cultivation was in a rotating shaker at 12 degrees C and 160 r/min for 64 h.Under those conditions,the highest total enzyme activity (2.6 U/mL) was obtained and increased by 10.8 fold compared with the original value of 0.24 U/mL before optimization. This amylase was purified by concentration with ultrafiltration membrane module, Hitrap Q anion exchange chromatography and Superdex 200 gel filtration chromatography. The optimal temperature and pH for the purified amylase were 30 degrees C and 6.0, respectively.It still showed high activity at low temperature 10-15 degrees C. It was sensitive to high temperature but was stable at pH 6.0-10.0 with at least 70% activity remained. These results indicated that it was a typical cold-adapted enzyme. The enzyme activity was stimulated by Ca2+, Mn2+, Co2+ and Mg2+; but inhibited by Zn2+, Ba2+, Ag+, Cu2+, Al3+, Fe2, Fe3+, Hg2+, EDTA and citrate. This cold-adapted amylase showed resistance to inactivation of 0.1% nonionic surfactants such as Tween 80, TrintonX-100, etc. Its Km was 0.90 mg/mL.
Wang, Ju Peng; Li, Nian Bing; Luo, Hong Qun
2008-11-01
A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with rhodamine 6G and ceric sulfate in sulphuric acid medium. Strong chemiluminescence signal was observed when ferulic acid was injected into the acidic ceric sulfate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 8.0 x 10(-6) to 1.0 x 10(-4) mol l(-1) and the detection limit for ferulic acid was 8.7 x 10(-9) mol l(-1). The relative standard deviation was 2.4% for 10 replicate analyses of 1.0 x 10(-5) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in Taita Beauty Essence samples with satisfactory results.
Koo, Hyun-Na; Lee, Soon-Gyu; Yun, Seung-Hwan; Kim, Hyun Kyung; Choi, Yong Soo; Kim, Gil-Hah
2016-01-01
This study compared stress-induced expression of Cu-Zn superoxide dismutase (SOD1) and thioredoxin reductase (TrxR) genes in the European honeybee Apis mellifera L. and Asian honeybee Apis cerana F. Expression of both SOD1 and TrxR rapidly increased up to 5 h after exposure to cold (4 °C) or heat (37 °C) treatment and then gradually decreased, with a stronger effect induced by cold stress in A. mellifera compared with A. cerana. Injection of stress-inducing substances (methyl viologen, [MV] and H2O2) also increased SOD1 and TrxR expression in both A. mellifera and A. cerana, and this effect was more pronounced with MV than H2O2. Additionally, we heterologously expressed the A. mellifera and A. cerana SOD1 and TrxR proteins in an Escherichia coli expression system, and detection by SDS-PAGE, confirmed by Western blotting using anti-His tag antibodies, revealed bands at 16 and 60 kDa, respectively. Our results show that the expression patterns of SOD1 and TrxR differ between A. mellifera and A. cerana under conditions of low or high temperature as well as oxidative stress. © The Author 2016. Published by Oxford University Press on behalf of the Entomological Society of America.
Elicitation of macrophages from the peritoneal cavity of channel catfish
Jenkins, J.A.; Klesius, P.H.
1998-01-01
Four chemicals were evaluated for elicitation of macrophages in peritoneal cavities of 250-300g healthy channel catfish Ictalurus punctatus. Cellular exudates were collected at 3, 5, 7, 10, 14, and 20 d following intraperitoneal injections with squalene, Freund's incomplete adjuvant (FIA), goat serum, thioglycollate, or as a control, phosphate-buffered saline. Injection with either squalene or FIA induced significantly greater (P ??? 0.0001) macrophage recruitment than the other chemicals. The effectiveness of squalene and FIA was compared further by macrophage collection daily for 7 d. Squalene and FIA elicited similarly high macrophage responses (P ??? 0.0450), the highest being 3.43 x 106 macrophages/mL (SE, 2.4 x l06) at 99% purity at day 2 and 2.1 X 106 macrophages/mL (SE, 0.7 x 106) at day 14 at 80% purity, respectively. In both experiments, the time after injection was not statistically significant, nor was there an interaction between time and chemicals. The occurrence of cells other than macrophages decreased with time to yield macrophage recoveries of 47-99% for squalene and 30-80% for FIA. Two subsets of macrophages were observed by means of flow cytometry. As demonstrated by chemiluminescence, the squalene-elicited cells produced high-energy oxygen compounds important to the phagocytic process.
Geographical influences on content of 10-hydroxy-trans-2-decenoic acid in royal jelly in China.
Wei, Wen-Ting; Hu, Yuan-Qiang; Zheng, Huo-Qing; Cao, Lian-Fei; Hu, Fu-Liang; Hepburn, H Randall
2013-10-01
The content of 10-hydroxy-trans-2-decenoic acid (10-HDA), a marker compound in royal jelly (RJ), is the most important criterion in grading RJ for commercial trade and varies with its origin. To identify the effect of geographical origin on 10-HDA content in RJ, 138 samples were collected from 19 provinces of China (divided into three groups) produced by either Apis mellifera ligustica Spinola, 1806 or a hybrid of A. m. ligustica and Apis mellifera carnica Pollman, 1879 and analyzed for moisture, sugar, crude protein, ash, acid, and 10-HDA concentration. The results show that RJ from western China has a significantly higher 10-HDA level (2.01 +/- 0.05%) than those from northeastern (1.87 +/- 0.05%) and eastern (1.75 +/- 0.03%) China. RJ secreted by hybrid bees contained more 10-HDA (1.89 +/- 0.03%) than that secreted by A. m. ligustica (1.78 +/- 0.03%). The 10-HDA content of RJ produced during flowering of rape (Brassica campestris L.), lime (Tilia amurensis Ruprecht), and vitex (Vitex negundo L. variety heterophylla (Franch.) Rehder) was 1.92, 1.80, and 1.68%, respectively. The results would be helpful during the process of price determination of RJ by providing some basis of geographical, bee strain, and botanical information for commercial trade.
[Staphylococcus aureus infection in Apis mellifera L. (honeybees)].
Keskin, N
1989-07-01
The causative agent of American foulbrood is Bacillus larvae, the causes of the European foulbrood diseases are Streptococcus pluton and Bacillus alvei and the causes of the septicemia are Pseudomonas apiseptica and Escherichia coli in honeybees (Apis mellifera). Apart from the above causative agents in this study, Staphylococcus aureus has been isolated and identified from honeybees (Apis mellifera).
Properties of different lactic acid bacteria isolated from Apis mellifera L. bee-gut.
Carina Audisio, M; Torres, María J; Sabaté, Daniela C; Ibarguren, Carolina; Apella, María C
2011-01-20
Eight strains belonging to Lactobacillus spp. and five to Enterococcus spp. were isolated from the gut of worker Apis mellifera L. bees. Studies based on 16S rRNA sequencing revealed that AJ5, IG9, A15 and CRL1647 strains had a 99% identity with Lactobacillus johnsonii, while SM21 showed a 99% similarity with Enterococcus faecium. L. johnsonii CRL1647, AJ5 and IG9 were high lactic acid producers (values were between 177 and 275 mM), and in vitro they inhibited different human food-borne pathogens and Paenibacillus larvae, the American foulbrood agent. This bacterium was the most sensitive to the lactic acid effect being inhibited by 44 mM of this metabolite. L. johnsonii CRL1647, AJ5 and IG9 also presented important surface properties. These cells showed between 77% and 93% of auto-aggregation. The preliminary study of the chemical nature of the aggregating factors revealed that the molecules involved in the surface of each L. johnsonii strain were quite complex; and something of a peptidic nature was mainly involved. E. faecium SM21 produced bacteriocin-like compounds with anti-Listeria effects. Furthermore, a band close to 6.0-7.5 kDA was detected by SDS-PAGE studies, and the entA, B and P structural genes were amplified by PCR reactions. For the first time, bee-gut associated L. johnsonii and E. faecium strains have been isolated, identified, cultivated and some of their functional properties reported. Copyright © 2010 Elsevier GmbH. All rights reserved.
Hsieh, Cheng-Huan; Meher, Anil Kumar; Chen, Yu-Chie
2013-01-01
Contactless atmospheric pressure ionization (C-API) method has been recently developed for mass spectrometric analysis. A tapered capillary is used as both the sampling tube and spray emitter in C-API. No electric contact is required on the capillary tip during C-API mass spectrometric analysis. The simple design of the ionization method enables the automation of the C-API sampling system. In this study, we propose an automatic C-API sampling system consisting of a capillary (∼1 cm), an aluminium sample holder, and a movable XY stage for the mass spectrometric analysis of organics and biomolecules. The aluminium sample holder is controlled by the movable XY stage. The outlet of the C-API capillary is placed in front of the orifice of a mass spectrometer, whereas the sample well on the sample holder is moved underneath the capillary inlet. The sample droplet on the well can be readily infused into the C-API capillary through capillary action. When the sample solution reaches the capillary outlet, the sample spray is readily formed in the proximity of the mass spectrometer applied with a high electric field. The gas phase ions generated from the spray can be readily monitored by the mass spectrometer. We demonstrate that six samples can be analyzed in sequence within 3.5 min using this automatic C-API MS setup. Furthermore, the well containing the rinsing solvent is alternately arranged between the sample wells. Therefore, the C-API capillary could be readily flushed between runs. No carryover problems are observed during the analyses. The sample volume required for the C-API MS analysis is minimal, with less than 1 nL of the sample solution being sufficient for analysis. The feasibility of using this setup for quantitative analysis is also demonstrated.
Xia, Tian; Liu, De-Ding; Shi, Li-Fu; Hu, Jin-Hong
2011-08-01
The study aims to elucidate the characteristics of pharmacokinetics of scopolamine hydrobromide oral disintegrative microencapsule tablets in healthy Beagle dogs. Chromatographic separation was performed on a C18 column (100 mm x 3.0 mm, 3.5 microm) with methanol - 2 mmol x L(-1) ammonium formate (25 : 75) as the mobile phase. A trip-quadrupole tandem mass spectrum with the electrospray ionization (ESI) source was applied and positive ion multiple reaction monitoring mode was operated. Six Beagle dogs were randomly devided into two groups. They received oral single dose of scopolamine hydrobromide oral disintegrative microencapsule tablets 0.6 mg (test tablet) or scopolamine hydrobromide normal tablets (reference tablet). Plasma samples were collected at designed time. Plasma concentration of scopolamine hydrobromide was determined by LC-MS/MS and pharmacokinetic parameters were calculated. The pharmacokinetic parameters of test tablet vs reference tablet were as follows: C(max): (8.16 +/- 0.67) ng x mL(-1) vs (3.54 +/- 0.64) ng x mL(-1); t1/2: (2.83 +/- 0.45) h vs (3.85 +/- 0.82) h; t(max): (1.25 +/- 0.27) h vs (0.42 +/- 0.09) h; AUC(0-12h): (25.06 +/- 3.75) h x ng x mL(-1) vs (9.59 +/- 1.02) h x ng x mL(-1); AUC(0-infinity): (26.30 +/- 3.92) h x ng x mL(-1) vs (10.80 +/- 1.45) h x ng x mL(-1); MRT(0-12h): (3.38 +/- 0.34) h vs (3.86 +/- 0.26) h; MRT(0-infinity): (3.98 +/- 0.63) h vs (5.37 +/- 1.00) h. The absorption rate and AUC of test tablet is different from that of reference tablet. The bioavailability of test tablet is better than those of reference tablet.
Chemical tests: Propellants, Gases, and Metals
1975-12-11
14 Determination of Chromium and Nickel in Stainless Steels by X-ray Spectroscopy 80 5. 15 Determination of Furfural in Furfuryl Alcohol by Infrared...and b for nickel. 81 TOP 5-2-5S5 11 December 1975 5. 15 l)eterminazocn of Furfural in Furfury iAlcohol by 1 nfrared Spectroscoov 5. 15. 1 Objective...To determine the furfural content of furfuryl alcohol. Fart. ryl alcohol is manufactured from furfural atA elevated pressure and temperatare; resi.dual
Clinical reactivity of celery cultivars in allergic patients: Role of Api g 1.
Dölle, S; Welter, S; Ruppel, E; Lehmann, K; Schwarz, D; Jensen-Jarolim, E; Zieglmayer, P; Franken, P; Worm, M
2018-04-01
Celery (Apium graveolens L.) is a vegetable consumed world-wide. Celery stalks and celeriac roots are often ingredients in convenient food products like spice blends and soups. In this study, we examined the allergenicity of distinct celeriac cultivars. Sixteen celery-allergic patients were identified using a double-blind, placebo-controlled food challenge. Ten different celeriac cultivars were used for skin prick testing in the patients. Two cultivars were further applied for oral food challenges; their protein composition was analysed by immunoblotting, and contents of major allergen Api g 1 were quantified. From the 10 investigated celeriac cultivars, two cultivars elicited significantly different skin reactivity ("Anita": 5.0 [2.0-12.0] mm vs "Prinz": 7.0 [3.0-9.5] mm; P = .047). Moreover, "Anita" induced fewer symptoms after a controlled oral-celeriac challenge in 14 patient (P < .001). The protein profiles on 2DE protein gels showed distinct protein patterns and higher protein amounts of Api g 1 in "Prinz" than in "Anita." Taken together, the data from this study suggest that cultivar Anita is better tolerated in celery-allergic patients than "Prinz." Differences in the protein expression profile between the cultivars, particularly the different content of Api g 1, could cause the different allergenicity. © 2018 John Wiley & Sons Ltd.
New Tween-80 microbiological assay of serum folate levels in humans and animals.
Zhou, Zhenghua; Yang, Yuan; Li, Ming; Kou, Chong; Xiao, Ping; Jiang, Yan; Hong, Junrong; Huang, Chengyu
2012-01-01
The objective of this study was to develop a new Tween-80 microbiological assay (Tween-80 MBA) to determine human or animal serum folate levels and to verify its reliability. The effects of the Lactobacillius casei subspecies rhamnosus (L. casei, ATCC No. 7469) inoculum concentration, incubation time, and Tween-80 on L. casei growth were studied, and the serum folate levels were investigated. Serum samples were collected from patients with esophageal cancer (EC) and healthy control subjects in Yanting, healthy adult subjects in Chengdu, Sichuan, and in male Sprague-Dawley rats. Optimal conditions for the new MBA were as follows: 1.28 x 10(7) CFU/mL working inoculum, vitamin folic acid assay broth with 0.24% (w/w) Tween-80, and anaerobic incubation with L. casei at 37 degrees C for 22 h. Under the optimal conditions, the working curve was in simple linear rather than logarithmic equation; the linear working curve of the folic acid standard working solution concentration versus the turbidity (adsorption value) of medium with L. casei ranged from 0.05 to 1.00 microg/L; the linear correlation coefficient was 0.9989 (SD 0.0007); the recovery rate of folate was 105.4-112.7%; and the minimum concentration for detecting folate was 0.03 microg/L. The RSD within-day and between-day precisions were 5.6 and 3.3%, respectively. The serum folate level of 100 EC patients was 6.4 (SEM 0.4) microg/L which was significantly lower than that of healthy control subjects [8.0 (SEM 0.6) microg/L, n = 100, P=0.020]. The new Tween-80 MBA is considered to be a reliable method for measuring serum folate level.
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
33 CFR 127.003 - Incorporation by reference.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Requirements, Combustible Gas Detectors, 1986 127.1203 American Petroleum Institute (API) 1220 L Street NW., Washington, DC 20005: API RP 2003, Protection Against Ignitions Arising Out of Static, Lightning and Stray...
RXTE All-Sky Slew Survey. Catalog of X-Ray Sources at B Greater Than 10 deg
NASA Technical Reports Server (NTRS)
Revnivtsev, M.; Sazonov, S.; Jahoda, K.; Gilfanov, M.
2004-01-01
We report results of a serendipitous hard X-ray (3-20 keV), nearly all-sky (absolute value of b greater than l0 deg.) survey based on RXTE/PCA observations performed during satellite reorientations in 1996-2002. The survey is 80% (90%) complete to a 4(sigma) limiting flux of approx. = 1.8 (2.5) x 10(exp -l1) erg/s sq cm in the 3-20 keV band. The achieved sensitivity in the 3-8 keV and 8-20 keV subbands is similar to and an order of magnitude higher than that of the previously record HEAO-1 A1 and HEAO-1 A4 all-sky surveys, respectively. A combined 7 x 10(exp 3) sq. deg area of the sky is sampled to flux levels below l0(exp -11) erg/ s sq cm (3-20 keV). In total 294 sources are detected and localized to better than 1 deg. 236 (80%) of these can be confidently associated with a known astrophysical object; another 22 likely result from the superposition of 2 or 3 closely located known sources. 35 detected sources remain unidentified, although for 12 of these we report a likely soft X-ray counterpart from the ROSAT all-sky survey bright source catalog. Of the reliably identified sources, 63 have local origin (Milky Way, LMC or SMC), 64 are clusters of galaxies and 100 are active galactic nuclei (AGN). The fact that the unidentified X-ray sources have hard spectra suggests that the majority of them are AGN, including highly obscured ones (N(sub H) greater than l0(exp 23)/sq cm). For the first time we present a log N-log S diagram for extragalactic sources above 4 x l0(exp -12) erg/ s sq cm at 8-20 keV. Key words. cosmo1ogy:observations - diffuse radiation - X-rays general
Simulation of the Interaction Between Airdrop Platforms and Aircraft Rollers
1982-04-01
0? y coordinates 1 36 138 1 40 42 Ask 46 89.0 7879 80 8’W82 83 84 495211 2 I 5 2 60.0 -& - --------- 59 6006 26 Eg I 20.0 10.0 ~1 ;94:2 57 %- A 63 5...o5: cc0 C’)L cl Cl 0- 0.0 CRC X 00 1%0. z -J .1L vi co 02.~j_____ I- i __________ _ Il ) co V~fC M T 0 O) C)0 f - CW - N - - ciOc’o 0) - 0) - Ws 8 M
Wei, Ze-Xiu; Liang, Yin-Li; Inoue, Mitsuhiro; Zhou, Mao-Juan; Huang, Mao-Lin; Gu, Jian-Feng; Wu, Yan
2009-07-01
With cucumber (Cucumis sativus L.) variety Jinyou 1 as test material, a greenhouse experiment was conducted to study the effects of different water and fertilizer supply on the cucumber soil nutrient content, enzyme activity, and microbial diversity. Three water regimes (50%-60%, 70%-80%, and 90%-100% soil relative moisture content) and two fertilization practices (600 kg N x hm(-2) + 420 kg P2O5 x hm(-2) and 420 kg N x hm(-2) + 294 kg P2O5 x hm(-2)) were designed. The increase of water and fertilizer supply benefited the increase of soil available P content and sucrase activity. Increasing fertilization rate increased soil NH(4+)-N content but decreased soil protease activity, and increasing soil relative moisture content decreased the soil NH(4+)-N content and urease activity. Soil microbial diversity had no significant correlations with soil nutrient contents, but significantly positively correlated with soil urease activity and negatively correlated with soil sucrase activity. Among the treatments, the treatment 70%-80% soil relative moisture content + 600 kg N x hm(-2) and 420 kg P2O5 x hm(-2) had the highest soil nutrient contents, soil urease, sucrase, and phosphatase activities, and soil microbial diversity and evenness, being the best in soil potential productivity.
FONSECA, Rodrigo Borges; BRANCO, Carolina Assaf; QUAGLIATTO, Paulo Sérgio; GONÇALVES, Luciano de Souza; SOARES, Carlos José; CARLO, Hugo Lemes; CORRER-SOBRINHO, Lourenço
2010-01-01
Objective To determine the influence of P/L ratio on the radiodensity and diametral tensile strength (DTS) of glass ionomer cements. Material and Methods There were 2 factors under study: P/L ratio (manufacturer's recommended P/L ratio and a 50% reduced P/L ratio), and materials (Vitro Molar, Vitro Fil, Vitro Cem conventional GICs and Vitro Fil LC, Ortho Glass LC RMGICs). Five 1-mm-thick samples of each material-P/L ratio were produced for radiodensity evaluation. Samples were x-ray exposed onto Digora phosphor plate and radiodensity was obtained using the software Digora for Windows 2.5 Rev 0. For DTS, five (4.0x8.0 mm) cylinder samples of each material were tested (0.5 mm/min). Data were subjected to one- and two-way ANOVA (5x2) followed by Tukey's HSD test, or Kruskal-Wallis and Dunn's method. For paired comparisons, t-test or Mann-Whitney test were used (a=0.05). Results There was a significant interaction (P=0.001) for the studied factors (materials vs. P/L ratio). Reduced P/L ratio resulted in significantly lower DTS for the RMGICs, but radiodensity was affected for all materials (P<0.05). Conclusions Reduced P/L ratio affected properties of the tested glass ionomer cements. RMGICs were more susceptible to lower values of DTS, but radiodensity decreased for all materials following P/L ratio reduction. PMID:21308288
Administration and Stenographic Career Ladders, AFS 702x0/A/B/C and 702X1.
1980-04-01
MEN mIIIIIIIII hhhllllhlhhl UNITED STATES AIR FORCE _Si -j.- 0 ADMINISTRATION AND5$TENOGRAPHIC -CAREER LADDERS AIS 702XO/ A /B/C AND 702X1 -J AFPT- 9...7J2-389 ( ,/ " ’ _ LA. -IAPRI 180 This document has n a :’.-pro+ved1 + ,for pil s’ s ;i - , OqCUPATIONAL ANALYSIS PROGRAM USAF OCCUPATIONAL...79 APPENDIX A O--------------------------------------------- 80 Acc22~C~For 1 -* ii L PREFACE This report presents the results of a detailed Air
Cetinkaya, Zafer; Altindiş, Mustafa; Aktepe, Orhan Cem; Karabiçak, Nilgün
2003-10-01
The aim of this study was to compare the different methods for the identification of Candida strains isolated from clinical specimens. The methods of germ tube examination, chlamydospore examination formed on the rice Tween-80 (RT-80) agar and evaluation of colony morphologies on the two chromogenic agars (CHROMagar Candida, Albicans ID), were compared with a reference API 20C AUX (bioMerieux, France) automated system based on the carbohydrate assimilation, for the identification of a total 255 Candida isolates. Of them, 173 (67.8%) were identified as C. albicans, 37 (14.5%) were C. glabrata, 23 (9%) were C. krusei, 9 (3.5%) were C. tropicalis, 9 (3.5%) were C. kefyr, 2 (0.8%) were C. guillermondii and 2 (0.8%) were C. parapsilosis, by API 20C AUX system. In the view of these results, 146 (84.4%) of C. albicans strains were identified by germ tube examination, 161 (93.1%) of C. albicans strains and 208 (81.5%) of total strains were identified by chlamydospore examination. 169 (97.7%) of C. albicans strains and 231 (90.6%) of total strains were identified by CHROMagar Candida method, and 168 (97.1%) of C. albicans strains were identified by Albicans ID method, correctly. In the CHROMagar Candida medium, 169 C. albicans isolates have produced bright green colored colonies, whereas 33 (89.2%) isolates which produced dark pink/purple colored colonies were identified as C. glabrata, 7 (77.8%) isolates which produced metalical blue colored colonies were identified as C. tropicalis and 22 (95.6%) isolates which produced pale pink colored colonies were identified as C. krusei. In the Albicans ID medium, four of the 172 isolates which were evaluated as C. albicans initially by producing blue colored colonies, have been identified as C. tropicalis by API 20C AUX system. The sensitivities and specificities of germ tube examination, RT-80, CHROMagar Candida and Albicans ID methods were found as follows, respectively; 84.4% and 100%, 93.1% and 100%, 97.7% and 100%, 99.4% and 95.3 percent. In conclusion, CHROMagar Candida medium seems the most favorable rapid and practical method with high sensitivity and specificity for the identification of Candida species, but its cost-effectiveness should be kept in view.
The use of fatty acid esters to enhance free acid sophorolipid synthesis.
Ashby, Richard D; Solaiman, Daniel K Y; Foglia, Thomas A
2006-02-01
Fatty acid esters were prepared by transesterification of soy oil with methanol (methyl-soyate, Me-Soy), ethanol (ethyl-soyate, Et-Soy) and propanol (propyl-soyate, Pro-Soy) and used with glycerol as fermentation substrates to enhance production of free-acid sophorolipids (SLs). Fed-batch fermentations of Candida bombicola resulted in SL yields of 46 +/- 4 g/l, 42 +/- 7 g/l and 18 +/- 6 g/l from Me-Soy, Et-Soy, and Pro-Soy, respectively. Liquid chromatography with atmospheric pressure ionization mass spectrometry (LC/API-MS) showed that Me-Soy resulted in 71% open-chain SLs with 59% of those molecules remaining esterified at the carboxyl end of the fatty acids. Et-Soy and Pro-Soy resulted in 43% and 80% open-chain free-acid SLs, respectively (containing linoleic acid and oleic acid as the principal fatty acid species linked to the sophorose sugar at the omega-1 position), with no evidence of residual esterification.
Apoptosis inhibitor 5 (API-5; AAC-11; FIF) is upregulated in human carcinomas in vivo.
Koci, Lenka; Chlebova, Katarina; Hyzdalova, Martina; Hofmanova, Jirina; Jira, Miroslav; Kysela, Petr; Kozubik, Alois; Kala, Zdenek; Krejci, Pavel
2012-04-01
Apoptosis inhibitor 5 (API-5) is a 55 kDa nuclear protein with potent anti-apoptotic signaling in tumor cells in vitro. In this study, we analyzed the expression of the API-5 protein in vivo in a broad spectrum of human carcinomas, including those of the colon, lung, liver, kidney, pancreas, stomach and esophagus using tumor tissues obtained during tumor resection. The results showed significant upregulation of API-5 expression in biopsies of lung (23%, n=13) and colorectal tumors (33%, n=27) in comparison with biopsies from the adjacent normal tissue. Colon cancer biopsies were used to study the cell populations with an upregulated level of expression of API-5 more closely. Using a magnetic bead-based selection for the epithelial cell marker EpCAM, we purified epithelial cells from the tumor and control tissues and analyzed these cells for API-5 expression by western immunoblotting. We observed that EpCAM-positive tumor cells expressed API-5 in all three colorectal cancer cases tested, in contrast to the control EpCAM-positive and EpCAM-negative cells isolated from the control or tumor tissues. These data suggest that the expression of the API-5 protein is upregulated in tumor epithelial cells and may serve as a prognostic marker in colorectal cancer.
An, Jianguo; Sun, Mingjiang; Bai, Lin; Chen, Ted; Liu, David Q; Kord, Alireza
2008-11-04
Derivatization LC/MS methodology has been developed for the determination of a group of commonly encountered alkyl esters of sulfonates or sulfates in drug substances at low ppm levels. This general method uses trimethylamine as the derivatizing reagent for ethyl/propyl/isopropyl esters and triethylamine for methyl esters. The resulting quaternary ammonium derivatization products are highly polar (ionic) and can be retained by a hydrophilic interaction liquid chromatography (HILIC) column and readily separated from the main interfering active pharmaceutical ingredient (API) peak that is usually present at very high concentration. The method gives excellent sensitivity for all the alkyl esters at typical target analyte level of 1-2 ppm when the API samples were prepared at 5mg/mL. The recoveries at 1-2 ppm were generally above 85% for all the alkyl esters in the various APIs tested. The injection precisions of the lowest concentration standards were excellent with R.S.D.=0.4-4%. A linear range for concentrations from 0.2 to 20 ppm has been established with R(2)>or=0.99. This general method has been tested in a number of API matrices and used successfully for determination of alkyl sulfonates or dialkyl sulfates in support of API batch releases at GlaxoSmithKline.
Gepp, Barbara; Lengger, Nina; Bublin, Merima; Hemmer, Wolfgang; Breiteneder, Heimo; Radauer, Christian
2014-01-01
Background Characterization of IgE-binding epitopes of allergens and determination of their patient-specific relevance is crucial for the diagnosis and treatment of allergy. Objective We sought to assess the contribution of specific surface areas of the major birch pollen allergen Bet v 1.0101 to binding IgE of individual patients. Methods Four distinct areas of Bet v 1 representing in total 81% of its surface were grafted onto the scaffold of its homolog, Api g 1.0101, to yield the chimeras Api-Bet-1 to Api-Bet-4. The chimeras were expressed in Escherichia coli and purified. IgE binding of 64 sera from Bet v 1–sensitized subjects with birch pollen allergy was determined by using direct ELISA. Specificity was assessed by means of inhibition ELISA. Results rApi g 1.0101, Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4 bound IgE from 44%, 89%, 80%, 78%, and 48% of the patients, respectively. By comparing the amount of IgE binding to the chimeras and to rApi g 1.0101, 81%, 70%, 75%, and 45% of the patients showed significantly enhanced IgE binding to Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4, respectively. The minority (8%) of the sera revealed enhanced IgE binding exclusively to a single chimera, whereas 31% showed increased IgE binding to all 4 chimeras compared with rApi g 1.0101. The chimeras inhibited up to 70% of IgE binding to rBet v 1.0101, confirming the specific IgE recognition of the grafted regions. Conclusion The Bet v 1–specific IgE response is polyclonal, and epitopes are spread across the entire Bet v 1 surface. Furthermore, the IgE recognition profile of Bet v 1 is highly patient specific. PMID:24529686
Gepp, Barbara; Lengger, Nina; Bublin, Merima; Hemmer, Wolfgang; Breiteneder, Heimo; Radauer, Christian
2014-07-01
Characterization of IgE-binding epitopes of allergens and determination of their patient-specific relevance is crucial for the diagnosis and treatment of allergy. We sought to assess the contribution of specific surface areas of the major birch pollen allergen Bet v 1.0101 to binding IgE of individual patients. Four distinct areas of Bet v 1 representing in total 81% of its surface were grafted onto the scaffold of its homolog, Api g 1.0101, to yield the chimeras Api-Bet-1 to Api-Bet-4. The chimeras were expressed in Escherichia coli and purified. IgE binding of 64 sera from Bet v 1-sensitized subjects with birch pollen allergy was determined by using direct ELISA. Specificity was assessed by means of inhibition ELISA. rApi g 1.0101, Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4 bound IgE from 44%, 89%, 80%, 78%, and 48% of the patients, respectively. By comparing the amount of IgE binding to the chimeras and to rApi g 1.0101, 81%, 70%, 75%, and 45% of the patients showed significantly enhanced IgE binding to Api-Bet-1, Api-Bet-2, Api-Bet-3, and Api-Bet-4, respectively. The minority (8%) of the sera revealed enhanced IgE binding exclusively to a single chimera, whereas 31% showed increased IgE binding to all 4 chimeras compared with rApi g 1.0101. The chimeras inhibited up to 70% of IgE binding to rBet v 1.0101, confirming the specific IgE recognition of the grafted regions. The Bet v 1-specific IgE response is polyclonal, and epitopes are spread across the entire Bet v 1 surface. Furthermore, the IgE recognition profile of Bet v 1 is highly patient specific. Copyright © 2014 The Authors. Published by Mosby, Inc. All rights reserved.
Scaling Problems for Wave Propagation in Layered Systems. Volume 2
1989-09-01
PROPERTIES OF ALUMINIUM , LEXAN AND CONCRETE ^lumiunui Lexan Concrete* Bulk Modulus (Gpa) 80 3.47 13.1 Shear Modulus (Gpa) 30 0.90 9.4 Density (kg/’m3...783 TXXii3. TZZW=O. SzX11=0. EhiO. S 0J . zDKiEi=xD (LVABI5) YDliki!D WLAF.4) F T 3. 1 8011 = 0. 1ASSSD. L 3= LVIRS C-PI1, THE COOBD. OF CELLS AROUND
[Effects of carbon and nitrogen sources on 5-keto-gluconic acid production].
Tan, Zhilei; Wang, Hongcui; Wei, Yuqiao; Li, Yanyan; Zhong, Cheng; Jia, Shiru
2014-01-01
Gluconobacter oxydans is known to oxidize glucose to gluconic acid (GA), and subsequently, to 2-keto-gluconic acid (2KGA) and 5-keto-gluconic acid (5KGA), while 5KGA can be converted to L-(+)-tartaric acid. In order to increase the production of 5KGA, Gluconobacter oxydans HGI-1 that converts GA to 5KGA exclusively was chosen in this study, and effects of carbon sources (lactose, maltose, sucrose, amylum and glucose) and nitrogen sources (yeast extract, fish meal, corn steep liquor, soybean meal and cotton-seed meal) on 5KGA production were investigated. Results of experiment in 500 mL shake-flask show that the highest yield of 5KGA (98.20 g/L) was obtained using 100 g/L glucose as carbon source. 5KGA reached 100.20 g/L, 109.10 g/L, 99.83 g/L with yeast extract, fish meal and corn steep liquor as nitrogen source respectively, among which the optimal nitrogen source was fish meal. The yield of 5KGA by corn steep liquor is slightly lower than that by yeast extract. For the economic reason, corn steep liquor was selected as nitrogen source and scaled up to 5 L stirred-tank fermentor, and the final concentration of 5KGA reached 93.80 g/L, with its maximum volumetric productivity of 3.48 g/(L x h) and average volumetric productivity of 1.56 g/(L x h). The result obtained in this study showed that carbon and nitrogen sourses for large-scale production of 5KGA by Gluconobacter oxydans HGI-1 were glucose and corn steep liquor, respectively, and the available glucose almost completely (85.93%) into 5KGA.
Thermal Design of Boiler Unit (Standard Method).
1980-04-29
T-0411-80" h EhlllllEI mhEhhhhh m~lEElhElllllE Elhllllllhllll llllllllmllllu llllllllhllllu "’FTD-ID(RS)T-0411-80 FOREIGN TECHNOLOGY DIVISION THERMAL...Block italic Transliter. - - A a A, a P p p p R, r S B, b C C S B V, v T m , t r g Y y SD, d SE a Ye, ye; E, e* x X x Kh, , W Zc h , z h L 4 Ti , L...sh sn arc_4n 6 ch cosh arc or -. tar. th tanh arc t- Scot zth cct arc c’- h sec Sch sech arc sc- . - o-ec csc cscn cs ch aronc sc Russian Er.I n h rot
Parametric Crowd Generation Software for MS&T Simulations and Training
2007-02-20
3 Technology Overview 5 Dynemotion System Components 5 Dynemotion System Architecture 6 Dynemotion-Enabled NPC Brain Cycles 9 Dynemotion API...Contents 10 Development Project Background Information 11 Potential Application and Impact for the DoD 13 Project Objectives, Scope...Methodology 13 Benefits of the Project 13 Project Innovation 14 *l_essons Learned and Open Questions 14 Research and Development Challenges 16
Inverse relationship between VO2max and economy/efficiency in world-class cyclists.
Lucía, Alejandro; Hoyos, Jesus; Pérez, Margarita; Santalla, Alfredo; Chicharro, José L
2002-12-01
To determine the relationship that exists between VO2max and cycling economy/efficiency during intense, submaximal exercise in world-class road professional cyclists. METHODS Each of 11 male cyclists (26+/-1 yr (mean +/- SEM); VO2max: 72.0 +/- 1.8 mL x kg(-1) x min(-1)) performed: 1) a ramp test for O2max determination and 2) a constant-load test of 20-min duration at the power output eliciting 80% of subjects' VO2max during the previous ramp test (mean power output of 385 +/- 7 W). Cycling economy (CE) and gross mechanical efficiency (GE) were calculated during the constant-load tests. CE and GE averaged 85.2 +/- 2.3 W x L(-1) x min(-1) and 24.5 +/- 0.7%, respectively. An inverse, significant correlation was found between 1) VO2max (mL x kg(-0.32) x min(-1)) and both CE (r = -0.71; P = 0.01) and GE (-0.72; P = 0.01), and 2) VO2max (mL x kg(-1) x min(-1)) and both CE (r = -0.65; P = 0.03) and GE (-0.64; P = 0.03). A high CE/GE seems to compensate for a relatively low VO2max in professional cyclists.
Zhang, Shuang; Yao, Feng; Jing, Ting; Zhang, Mengchen; Zhao, Wei; Zou, Xiangyang; Sui, Linlin; Hou, Lin
2017-09-10
During the embryonic development of Artemia sinica, the diapause phenomenon can be induced by high salinity or low temperature conditions. The diapause embryo at the gastrula stage is maintained under the threat of apoptosis to guarantee the embryo's normal development. In this process, apoptosis inhibitor proteins play vital roles in protecting embryos against apoptosis. Apoptosis inhibitor5 (API5) plays a pivotal role in regulating the cell cycle and preventing programmed cell death after growth factor starvation. In the present study, we cloned the full-length cDNA representing the api5 gene from A. sinica (As-api5), which encodes a 372-amino acid protein. In situ hybridization experiments revealed that As-api5 expression is not tissue or organ specific. Quantitative real-time PCR analyses of the developmental expression of As-api5 showed that it reached its highest level at 10h, after which its expression decreased. High salinity and low temperature treatments increased the expression of As-api5. Western blotting was used to assess the abundance of As-API5 and related proteins (As-CyclinA, As-CyclinE, As-E2F1, As-CDK2, As-APAF1, and As-Caspase9). Downregulation of As-api5 expression using a short interfering RNA resulted in increased mortality and embryo malformation of A. sinica. Taken together, the results indicated that API5 plays a crucial role in embryonic diapause termination and early embryo development of A. sinica. Copyright © 2017. Published by Elsevier B.V.
Numerical Electromagnetic Code (NEC)-Reflector Antenna Code: Part II. Code Manual.
1979-09-01
SI N*I~iSl NTE. L%) I 82 GO ) 242 182 1b8. 3 ZL=P3 84 [) HHO =ZL-HOS( I) b5 If- (r)RH,.L[-..21.AND.DRIIO.GF.O.) ZL=RiOS(1)-9).05 80DFHO=ZL-PHOS(2...ALPHA(2) ,X(2),Y(2),Z(2),XS(3), HHOS (2) DIMENSION MI.J(2 ),.ML(2 ),SIGN(2) I]I LOGI CAL L’f[ST, LI)E13! * 12 COMMON /RFFr)Y/fHOS I -"’ICOMMAON /FOCAL
Ji, Yu-Bin; Ji, Chen-Feng; Zou, Xiang; Liu, Hui-Xin
2007-09-01
In the present research we used gas chromatography-mass spectrometry (G C-MS) to determine metabolites of toluene diisocyanate (TDI) in mice and deduce the pathway for toluene diisocyanate metabolism in the organism. Conditions for TDI chromatography: Supelco PTETM-5 chromatographic column (30 mm x 0.25 mm x 0.25 microm); initial column temperature: 90 degrees C, which was maintained for 30 min, then the temperature was increased at a rate of 40 degrees C x min(-1) to 280 degrees C, and maintained for 5.25 min; temperature for the vaporizing chamber: 250 degrees C; carrier gas: helium flowing at 1.0 microL x min(-1). Conditions for chromatography of TDI metabolites in the organism: 94% methyl, 4% ethenyl-bonded-phase fused-silica capillary column (30 + 2 m x 0.25 + 0.02 mm); initial column temperature: 30 degrees C, which was maintained for 5 min, after and then was increased at a rate of 80 degrees C x min(-1) to 280 degrees C, and maintained for 5 min; temperature for the vaporizing chamber: 250 degrees C; carrier gas: helium flowing at 1.0 microL x min(-1). Conditions for mass spectrometry: EI for ionization; 70 eV for ionization energy; 280 degrees C for connecting tube temperature; 35-350 micro for range of scanning; and 1.0 microL for sample size. The results showed that 2 ,4-toluene diisocyanate was metabolized into 2,4-diaminotoluene. Under the conditions selected for GC-MS, TDI metabolites in the organism can be isolated and identified.
Xu, Heng-Yi; Tian, Wan-Hong; Wan, Cui-Xiang; Jia, Li-Jun; Wang, Lan-Yin; Yuan, Jing; Liu, Chun-Mei; Zeng, Ming; Wei, Hua
2008-10-01
To investigate the indigenous lactobacilli from the vagina of pregnant women and to screen the isolates with antagonistic potential against pathogenic microorganisms. The strains were isolated from pregnant women's vagina and identified using the API50CH system. The ability of the isolates to produce hydrogen peroxide was analyzed semi-quantitatively using the TMB-HRP-MRS agar. The antagonistic effects of the isolates on pathogenic microorganisms were determined with a double layer agar plate. One hundred and three lactobacilli strains were isolated from 60 samples of vaginal secretion from healthy pregnant women. Among them, 78 strains could produce hydrogen peroxide, in which 68%, 80%, 80%, and 88% had antagonistic effects against Candida albicans CMCC98001, Staphylococcus aureus CMCC26003, Escherichia coli CMCC44113, and Pseudomonas aeruginosa CMCC10110, respectively. The recovery of hydrogen peroxide-producing lactobacilli decreases with the increasing pregnant age and time. The most commonly isolated species from vagina of Chinese pregnant women are Lactobacillus acidophilus and Lactobacillus crispatus. Most of L. acidophilus and L. crispatus produce a high H2O2 level.
Arayne, M Saeed; Sultana, Najma; Tabassum, Arman
2015-02-01
An efficient, selective and cost-effective liquid chromatographic assay was developed and validated for the simultaneous quantification of ciprofloxacin and rosuvastatin in Active Pharmaceutical Ingredients (API), pharmaceutical formulations and in human serum. The chromatographic system consisted of mobile phase methanol-water, 90:10 v/v at pH 3.0 adjusted with o-phosphoric acid, pumped at 1.0 mL/min through a prepacked Purospher Star C18 (5 µm, 25 × 0.46 cm) column and effluent was monitored at the isosbestic point (255 nm) as well as at the λmax of individual drugs (243 and 271 nm). The method was validated over a linear concentration range of 0.25-15 µg/mL for ciprofloxacin and 0.33-20 µg/mL for rosuvastatin (r(2) ≥ 0.999). The ranges of reliable response (limits of detection and quantitation) for ciprofloxacin were 3-15 and 9-45 ng/mL and 17-29 and 52-88 ng/mL, respectively, for rosuvastatin in all API, pharmaceutical formulations and human serum. Analytical recovery from human serum was >98% and relative standard deviation (RSD) was <2. The accuracies were 97.13-102.55 and 97.41-101.31% and precisions in RSD were 0.04-1.90 and 0.02-1.23% for ciprofloxacin and rosuvastatin, respectively. No matrix interferences, ion suppression/enhancement and carry-over were detected. The total assay run time was less than 5 min. In another study, for optimum performance the detector was programmed for multiwavelength scanning at the absorption maxima of each component. Consequently, the linearity range was improved and limit of detection and quantitation values were down to 1-4 and 4-12 ng/mL for ciprofloxacin and 3-5 and 9-15 ng/mL for rosuvastatin, respectively. The validation parameters fitted ICH guidelines through the isosbestic and individual λmax approach. The small sample volume and simplicity of preparation make this method suitable for use in human serum samples, pharmaceutical formulations, quality control, drug-drug interaction studies, clinical laboratories, drug research centers and forensic medical centers. Copyright © 2014 John Wiley & Sons, Ltd.
Kostich, Mitchell S; Batt, Angela L; Lazorchak, James M
2014-01-01
We measured concentrations of 56 active pharmaceutical ingredients (APIs) in effluent samples from 50 large wastewater treatment plants across the US. Hydrochlorothiazide was found in every sample. Metoprolol, atenolol, and carbamazepine were found in over 90% of the samples. Valsartan had the highest concentration (5300 ng/L), and also had the highest average concentration (1600 ng/L) across all 50 samples. Estimates of potential risks to healthy human adults were greatest for six anti-hypertensive APIs (lisinopril, hydrochlorothiazide, valsartan, atenolol, enalaprilat, and metoprolol), but nevertheless suggest risks of exposure to individual APIs as well as their mixtures are generally very low. Estimates of potential risks to aquatic life were also low for most APIs, but suggest more detailed study of potential ecological impacts from four analytes (sertraline, propranolol, desmethylsertraline, and valsartan). Published by Elsevier Ltd.
Mechanisms of arsenic-containing pyrite oxidation by aqueous arsenate under anoxic conditions
NASA Astrophysics Data System (ADS)
Qiu, Guohong; Gao, Tianyu; Hong, Jun; Tan, Wenfeng; Liu, Fan; Zheng, Lirong
2017-11-01
Adsorption and redox reactions occur between arsenic-containing pyrite and arsenate, which affect the migration and conversion of arsenic in soils and waters. However, the influence of arsenic incorporated in pyrite on the interaction processes is still enigmatic. In this work, arsenic-containing pyrites were hydrothermally synthesized with composition similar to naturally surface-oxidized pyrites in supergene environments. The effects of arsenic incorporation on the chemical composition and physicochemical properties were analyzed, and the interaction mechanism between arsenic-containing pyrites and aqueous arsenate was also studied within pH 3.0-11.0. Arsenic-containing pyrites with the arsenic contents of 0 (Apy0), 4.4 (Apy5) and 9.9 wt.% (Apy10) were produced in hydrothermal systems. As(III) and As(-I) respectively substituted Fe(II) and S2(-II) in the pyrite, and their relative contents respectively reached 76.6% and 17.2% in Apy5, and 91.0% and 8.0% in Apy10. Arsenic substitution resulted in a high content of Fe(III) in the form of Fe(III)sbnd S and a decrease in pyrite crystallinity. During the redox processes of arsenic-containing pyrites and arsenate, elemental S0, SO42- and goethite were formed as the main products with the adsorption of As(III,V), and As(III) was released due to the collapse of the crystal structure of pyrite and the oxidation of As(-I). Different redox mechanisms were achieved with pH increasing from 3.0 to 11.0 in the reaction system. At pH 3.0-6.0, Fe(III) contributed much to the oxidation of arsenic-containing pyrites, and arsenate and released As(III) were adsorbed on the surface of solid products. At pH 7.0-11.0, aqueous arsenate worked as the major oxidant, and its oxidation capacity increased with increasing pH. When the pH was increased from 3.0 to 7.0 and 11.0, the release ratio of incorporated arsenic from Apy10 particles increased from 34.1% to 45.0% and 56.8%, respectively. The present study facilitates a better understanding about the interaction mechanisms between arsenic-containing pyrite and arsenate in supergene environments.
Potential use of Lemna minor for the phytoremediation of isoproturon and glyphosate.
Dosnon-Olette, Rachel; Couderchet, Michel; Oturan, Mehmet A; Oturan, Nihal; Eullaffroy, Philippe
2011-07-01
Pesticides are being detected in water bodies on an increasingly frequent basis. The present study focused on toxicity and phytoremediation potential of aquatic plants to remove phytosanitary products from contaminated water. We investigated the capacity of Lemna minor (L. minor) to eliminate two herbicides isoproturon and glyphosate from their medium. Since phytoremediation relies on healthy plants, pesticide toxicity was evaluated by exposing plants to 5 concentrations (0-20 microg L(-1) for isoproturon and 0-120 microg L(-1) for glyphosate) in culture media for 4 d using growth rate and chlorophyll a fluorescence as endpoints. At exposure concentrations of 10 microg x L(-1) for isoproturon and 80 microg x L(-1) for glyphosate, effects on growth rate and chlorophyll fluorescence were minor (< 25%), so that this initial concentration was selected to study herbicide removal After a 4-d incubation, removal yields were 25% and 8% for isoproturon and glyphosate, respectively.
1984-02-01
Al -Zn-Mg alloy having only shearable...8217,.,...,..~~~ . . ... .--....-...-,,’’"....." --......-. ’. •"............ - ",- *S7/•a, .• • . .. . x / x . . v - ...... + + * - . . . . .. 1.. . . .. . . . . . . . . . . . . . . . . . . . . . . . .• 13 Al ...Zn-Mg (a) Al -Zn-Mg -, 0-15Mm D - 80m 0 -7 % o . - -9-. -.9-0 2 10 2 10 (0 0 16111 1011 1 23 4 56 3 45 6 7 -612 2 * ** t 2 -L. ** J 10 1 2 3 4 5
Yang, Fuyi; Shao, Qingchun; Li, Jinglin; Chen, Guoshuang
2004-08-01
Under field condition with 16-18 degree C water temperature, single-factor acute toxicity test was used to study the toxicity effects of water pH, salinity and carbonate-alkalinity on abnormal tadpole (R. chensinensis). The results showed that when the water salinity was 0.18 g x L(-1), carbonate-alkalinity was 1.41 mmol x L(-1), and water pH was 4.3-9.7, the survival rate of abnormal tadpole within 96 hours was not affected. The upper limit of LC50 for the pH within 24, 48, 72 and 96 hours was 10.33, 10.18, 10.08 and 10.02, and the prescribed minimum was 3.92, 4.07, 4.11 and 4.16, respectively. The upper limit of LC0 was 9.95, 9.80, 9.70 and 9.70, and the prescribed minimum was 4.23, 4.45, 4.30 and 4.30, and that of LC100 was 10.70, 10.55, 10.45 and 10.33, and the prescribed minimum was 3.55, 3.70, 3.92 and 4.03, respectively. The survival rate of abnormal tadpole within 96 hours was not affected in the water salinity between 2.0-3.0 g x L(-1). When water pH was 7.0-8.5 and carbonate-alkalinity was 1.41 mmol x L(-1), the LC50 of the salinity within 24, 48, 72 and 96 hours was 8.21, 7.25, 5.17 and 3.70 g x L(-1), the LC0 was 7.14, 6.00, 2.67 and 2.20 g x L(-1), and the LC100 was 9.98, 9.00, 7.67 and 5.20 g x L(-1), respectively, while the SC was 1.70 g x L(-1). Under the same water pH and when the water salinity was 0.18 g x L(-1), the LC50 of carbonate-alkalinity within 24, 48, 72 and 96 hours was 14.36, 11.83, 10.35, and 7.68 mmol x L(-1), the LC0 was 8.76, 8.51, 4.65 and 3.88 mmol x L(-1), and the LC100 was 19.96, 15.14, 16.05 and 11.48 mmol x L(-1), respectively, while the SC was 1.70 mmol x L(-1). The survival rate of abnormal tadpole (R. chensinensis) was decreased with increasing water pH, salinity and carbonate-alkalinity. The optimum water salinity and carbonate-alkalinity to the survival and the growth of abnormal tadpole (R. chensinensis) were below 2.0 g x L(-1) and 3.0 mmol x L(-1), respectively, and water pH was between 6.0 and 9.0.
A Class of Organopolysulfides As Liquid Cathode Materials for High-Energy-Density Lithium Batteries.
Bhargav, Amruth; Bell, Michaela Elaine; Karty, Jonathan; Cui, Yi; Fu, Yongzhu
2018-06-27
Sulfur-based cathodes are promising to enable high-energy-density lithium-sulfur batteries; however, elemental sulfur as active material faces several challenges, including undesirable volume change (∼80%) when completely reduced and high dependence on liquid electrolyte wherein an electrolyte/sulfur ratio >10 μL mg -1 is required for high material utilization. These limit the attainable energy densities of these batteries. Herein, we introduce a new class of phenyl polysulfides C 6 H 5 S x C 6 H 5 (4 ≤ x ≤ 6) as liquid cathode materials synthesized in a facile and scalable route to mitigate these setbacks. These polysulfides possess sufficiently high theoretical specific capacities, specific energies, and energy densities. Spectroscopic techniques verify their chemical composition and computation shows that the volume change when reduced is about 37%. Lithium half-cell testing shows that phenyl hexasulfide (C 6 H 5 S 6 C 6 H 5 ) can provide a specific capacity of 650 mAh g -1 and capacity retention of 80% through 500 cycles at 1 C rate along with superlative performance up to 10 C. Furthermore, 1302 Wh kg -1 and 1720 Wh L -1 are achievable at a low electrolyte/active material ratio, i.e., 3 μL mg -1 . This work adds new members to the cathode family for Li-S batteries, reduces the gap between the theoretical and practical energy densities of batteries, and provides a new direction for the development of alternative high-capacity cathode materials.
Stone, P J; Lucey, E C; Virca, G D; Christensen, T G; Breuer, R; Snider, G L
1990-06-01
A study was undertaken to determine whether emphysema and airway secretory cell metaplasia, induced in hamsters by intratracheal treatment with human neutrophil elastase (HNE), could be moderated by pretreatment with human alpha 1-protease inhibitor (API). API (4.9 mg) was given intratracheally to hamsters 1 h before 0.3 mg HNE. Eight weeks later, lung volumes and pressure-volume relationships were measured in the anaesthetized animals. Mean linear intercepts and secretory cell indices were measured in lung sections. API given 1 h before HNE moderated the development of bronchial secretory cell metaplasia. The severity of emphysema was reduced by 75%. Clearance studies indicated that 80% of the functional activity of instilled API could be lavaged from the lungs after 1 h, indicating a 4 h half-life in the lavageable compartment of the lungs. We calculate that for 50% protection from emphysema the molar ratio of lavageable API to HNE at the time of HNE instillation was 4.8 as compared with 0.78 for 50% inhibition of elastolytic activity in vitro, indicating that API is only 16% as efficient in vivo as compared with its in vitro HNE inhibitory effectiveness. Nevertheless, we conclude that human API given intratracheally is efficacious against HNE-induced emphysema and secretory cell metaplasia.
Code of Federal Regulations, 2011 CFR
2011-01-01
...) Galangal, frozen. (j) Gelatin (CAS # 9000-70-8). (k) Gums—water extracted only (Arabic; Guar; Locust bean; and Carob bean). (l) Hops (Humulus luplus). (m) Inulin-oligofructose enriched (CAS # 9005-80-5). (n... bean thread production only. (v) Tragacanth gum (CAS #-9000-65-1). (w) Turkish bay leaves. (x) Wakame...
Temporal and spatial behavior of pharmaceuticals in ...
The behavior of active pharmaceutical ingredients (APIs) in urban estuaries is not well understood. In this study, 15 high volume usage APIs were measured over a one year period throughout Narragansett Bay, RI, USA to determine factors controlling their concentration and distribution. Dissolved APIs ranged in concentration from not detected to 310 ng/L, with numerous APIs present at all sites and sampling periods. Eight APIs were present in suspended particulate material, ranging in concentration from <1 ng/g to 44 ng/g. Partitioning coefficients (Kds) were determined for APIs present in both the dissolved and particulate phases, with their range and variability remaining relatively constant during the study. Organic carbon normalization reduced the observed variability of several APIs to a small extent; however, other factors appear to play a role in controlling partitioning behavior. The continuous discharge of wastewater treatment plant effluents into upper Narragansett Bay resulted in sustained levels of APIs, resulting in a zone of “pseudo-persistence.” For most of the APIs, there was a strong relationship with salinity, indicating conservative behavior within the estuary. Short flushing times in Narragansett Bay coupled with APIs present primarily in the dissolved phase suggests that most APIs will be diluted and transported out of the estuary, with only small amounts of several compounds removed to and sequestered in sediments. This study ide
Stevanovic, Jevrosima; Schwarz, Ryan S; Vejnovic, Branislav; Evans, Jay D; Irwin, Rebecca E; Glavinic, Uros; Stanimirovic, Zoran
2016-09-01
In this study, honey bees collected in Serbia over 9 consecutive years (2007-2015) were retrospectively surveyed to determine the prevalence of eukaryotic gut parasites by molecular screening of archival DNA samples. We developed species-specific primers for PCR to detect the two known honey bee trypanosomatid species, Crithidia mellificae and the recently described Lotmaria passim. These primers were validated for target specificity under single and mixed-species conditions as well as against the bumblebee trypanosomatid Crithidia bombi. Infections by Nosema apis and Nosema ceranae (Microsporidia) were also determined using PCR. Samples from 162 colonies (18 from each year) originating from 57 different localities were surveyed. L. passim was detected in every year with an overall frequency of 62.3% and annual frequencies ranging from 38.9% to 83.3%. This provides the earliest confirmed record to date for L. passim and the first report of this species in Serbia. N. ceranae was ubiquitous, occurring in every year and at 95.7% overall frequency, ranging annually from 83.3% to 100%. The majority of colonies (60.5%) were co-infected with L. passim and N. ceranae, but colony infections by each species were statistically independent of one another over the nine years. Although C. mellificae and N. apis have both been reported recently at low frequency in Europe, neither of these species was detected in Serbia. These results support the hypothesis that L. passim has predominated over C. mellificae in A. mellifera during the past decade. Copyright © 2016 Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Zhang, Jie; Tan, Gai-Xiu; Liu, Bao-Lin; Dai, Yu-Bei; Xu, Na; Wen, Wei-Fen; Cao, Chong; Xiao, Hong-Ping
2017-05-01
Five Ag(I) coordination complexes, namely, [Ag6(2-stp)2(3-methyl-2-apy)3·H2O]n (1), [Ag3(2-stp)(4-methyl-2-apy)3]n (2), [Na2Ag18(2-stp)4(2-Hstp)4(5-methyl-2-apy)16 (H2O)4·11H2O]n (3), Ag3(2-stp)(6-methy-2-apy)4·H2O (4), and [Ag6(2-stp)2(6-methyl-2-apy)8(H2O)2·H2O]n (5) (2-NaH2stp = 2-sulfoterephthalic acid monosodium salt, 3-methyl-2-apy = 3-methyl-2-aminopyridine, 4-methyl-2-apy = 4-methyl-2-aminopyridine, 5-methyl-2-apy = 5-methyl-2-aminopyridine, 6-methyl-2-apy = 6-methyl-2-aminopyridine), have been synthesized and structurally characterized. Complexes 1 and 2 show two-dimensional network. In complex 3, the adjacent Ag10 units are bridged by 5-methyl-2-apy ligands to form a 2D infinite undulated sheet. Adjacent 2D sheets are linked by coordinative bonds between carboxylic oxygen atoms and Na(I) ions to form a 3D coordination polymer. Complex 4 is a 0-D discrete trinuclear molecule, and the self-complementary the Osbnd H⋯O and Nsbnd H⋯O hydrogen bonds incorporating hydrogen bond motifs extend these molecules into a 2D supramolecular framework. Compound 5 exhibits 1D-chain structure. However, complex 5 shows 3D supramolecular structure results from the linkage of neighboring layers through a rich hydrogen-bonding between uncoordinated sulfonates, amino groups and coordinated carboxylates. The thermogravimetric analyses and photoluminescence of the complexes were also investigated.
Alattal, Yehya; AlGhamdi, Ahmad; Single, Arif; Ansari, Mohammad Javed; Alkathiri, Hussien
2017-07-01
Varroa mite is the most destructive pest to bee colonies worldwide. In Saudi Arabia, preliminary data indicated high infestation levels in the exotic honeybee colonies; such as Apis mellifera carnica and Apis mellifera ligustica , compared to native honeybee subspecies Apis mellifera jemenitica , which may imply higher tolerance to Varroasis . In this study, fertility and reproductive rate of Varroa mite, Varroa destructor , in capped brood cells of the native honeybee subspecies were investigated and compared with an exotic honeybee subspecies, A. m . carnica . Mite fertility was almost alike (87.5% and 89.4%) in the native and craniolan colonies respectively. Similarly, results did not show significant differences in reproduction rate between both subspecies ( F = 0.66, Pr > F = 0.42). Number of adult Varroa daughters per fertile mother mite was 2.0 and 2.1 for native and craniolan honeybee subspecies respectively. This may indicate that mechanisms of keeping low infestation rates in the native honeybee colonies are not associated with Varroa reproduction. Therefore, potential factors of keeping lower Varroa infestation rates in native honey bee subspecies should be further investigated.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-21
...- 795, and the American Petroleum Institute (API) 5L specifications and meeting the physical parameters... standard, line, or pressure pipe applications and meeting the physical parameters described below.... The scope of this review includes all seamless pipe meeting the physical parameters described above...
Kanaujia, Parijat; Lau, Grace; Ng, Wai Kiong; Widjaja, Effendi; Schreyer, Martin; Hanefeld, Andrea; Fischbach, Matthias; Saal, Christoph; Maio, Mario; Tan, Reginald B H
2011-09-01
Enhanced dissolution of poorly soluble active pharmaceutical ingredients (APIs) in amorphous solid dispersions often diminishes during storage due to moisture-induced re-crystallization. This study aims to investigate the influence of moisture protection on solid-state stability and dissolution profiles of melt-extruded fenofibrate (FF) and ketoconazole (KC) solid dispersions. Samples were kept in open, closed and Activ-vials(®) to control the moisture uptake under accelerated conditions. During 13-week storage, changes in API crystallinity were quantified using powder X-ray diffraction (PXRD) (Rietveld analysis) and high sensitivity differential scanning calorimetry (HSDSC) and compared with any change in dissolution profiles. Trace crystallinity was observed by Raman microscopy, which otherwise was undetected by PXRD and HSDSC. Results showed that while moisture protection was ineffective in preventing the re-crystallization of amorphous FF, KC remained X-ray amorphous despite 5% moisture uptake. Regardless of the degree of crystallinity increase in FF, the enhanced dissolution properties were similarly diminished. Moisture uptake above 10% in KC samples also led to re-crystallization and significant decrease in dissolution rates. In conclusion, eliminating moisture sorption may not be sufficient in ensuring the stability of solid dispersions. Analytical quantification of API crystallinity is crucial in detecting subtle increase in crystallinity that can diminish the enhanced dissolution properties of solid dispersions.
Numerical Integration with Graphical Processing Unit for QKD Simulation
2014-03-27
Windows system application programming interface (API) timer. The problem sizes studied produce speedups greater than 60x on the NVIDIA Tesla C2075...13 2.3.3 CUDA API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.3.4 CUDA and NVIDIA GPU Hardware...Theoretical Floating-Point Operations per Second for Intel CPUs and NVIDIA GPUs [3
Multi-Robot Systems in Military Domains (Les Systemes Multi-Robots Dans les Domaines Militaires)
2008-12-01
to allow him to react quickly to improve his personal safety , it is mandatory to shorten the current very long delay needed for the human operator to...Hard RT tasks 2 OS / API Process monitoring 3 H / API Flexible communication medium 4 H / API Networking capabilities 5 H / API Safety 6 API...also be considered between high level services and legacy systems. 4) This is the one of the basic requirement for CoRoDe. 5) Safety : CRC, Timeouts
Absorption and pharmacokinetics of grapefruit flavanones in beagles.
Mata-Bilbao, Maria de Lourdes; Andrés-Lacueva, Cristina; Roura, Elena; Jáuregui, Olga; Escribano, Elvira; Torre, Celina; Lamuela-Raventós, Rosa Maria
2007-07-01
The present study evaluated the pharmacokinetics of three different grapefruit flavanone forms in dog plasma and demonstrated their absorption after an oral intake of a grapefruit extract; pharmacokinetic parameters of these forms were also determined. Ten healthy beagles were administered 70 mg citrus flavonoids as a grapefruit extract contained in capsules, while two additional dogs were used as controls and given an excipient. The grapefruit flavanone naringin, along with its metabolites naringenin and naringenin glucuronide, was detected in dog plasma. Blood samples were collected between 0 and 24 h after administration of the extract. Naringin reached its maximun plasma concentration at around 80 min, whereas naringenin and naringenin glucuronide reached their maximun plasma concentrations at around 20 and 30 min, respectively. Maximum plasma concentrations of naringin, naringenin and naringenin glucuronide (medians and ranges) were 0.24 (0.05-2.08), 0.021 (0.001-0.3) and 0.09 (0.034-0.12) micromol/l, respectively. The areas under the curves were 23.16 l (14.04-70.62) min x micromol/for nariningin, 1.78 (0.09-4.95) min x micromol/l for naringenin and 22.5 (2.74-99.23) min x micromol/l for naringenin glucuronide. The median and range values for mean residence time were 3.3 (1.5-9.3), 2.8 (0.8-11.2) and 8.0 (2.3-13.1) h for naringin, naringenin and naringenin glucuronide, respectively. The results of the present study demonstrate the absorption of grapefruit flavanones via the presence of their metabolites in plasma, thus making an important contribution to the field since the biological activities ascribed to these compounds rely on their specific forms of absorption.
Goel, Meenakshi; Larson, Eli; Venkatramani, C J; Al-Sayah, Mohammad A
2018-05-01
Enantioselective analysis is an essential requirement during the pharmaceutical development of chiral drug molecules. In pre-clinical and clinical studies, the Food and Drug Administration (FDA) mandates the assessment of "in vivo" inter-conversion of chiral drugs to determine their physiological effects. In-vivo analysis of the active pharmaceutical ingredient (API) and its potential metabolites could be quite challenging due to their low abundance (ng/mL levels) and matrix interferences. Therefore, highly selective and sensitive analytical techniques are required to separate the API and its metabolites from the matrix components and one another. Additionally, for chiral APIs, further analytical separation is required to resolve the API and its potential metabolites from their corresponding enantiomers. In this work, we demonstrate the optimization of our previously designed two-dimensional liquid chromatography-supercritical fluid chromatography-mass spectrometry (2D-LC-SFC -MS) system to achieve 10 ng/mL detection limit [1]. The first LC dimension, used as a desalting step, could efficiently separate the API from its potential metabolites and matrix components. The API and its metabolites were then trapped/focused on small trapping columns and transferred onto the second SFC dimension for chiral separation. Detection can be achieved by ultra-violet (UV) or MS detection. Different system parameters such as column dimensions, transfer volumes, trapping column stationary phase, system tubing internal diameter (i.d.), and detection techniques, were optimized to enhance the sensitivity of the 2D-LC-SFC-MS system. The limit of detection was determined to be 10 ng/mL. An application is described where a mouse hepatocyte treated sample was analyzed using the optimized 2D-LC-SFC-MS system with successful assessment of the ratio of API to its metabolite (1D-LC), as well as the corresponding enantiomeric excess values (% e.e.) of each (2D-SFC). Copyright © 2018 Elsevier B.V. All rights reserved.
USDA-ARS?s Scientific Manuscript database
Chalkbrood is an invasive mycosis in honey bees (Apis mellifera L.) produced by Ascosphaera apis fungus. Although fatal to individual larvae, the disease does not usually destroy an entire bee colony. However, it can cause significant losses in terms of both bee numbers and colony productivity. Chal...
Chalkbrood disease in honey bees
USDA-ARS?s Scientific Manuscript database
Chalkbrood is an invasive mycosis in honey bees (Apis mellifera L.) produced by Ascosphaera apis (Maassen ex Claussen) Olive and Spiltoir (Spiltoir, 1955) that exclusively affects bee brood. Although fatal to individual larvae, the disease does not usually destroy an entire bee colony. However, it c...
Word Frequency Analysis. MOS: 16P. Skill Levels 1 & 2.
1981-05-01
8217 ALSC1 ALP ESECATE I API’LYI A-129 I AjI ~ AS-L-%/VIC I ATTAIN I1As~L2r v L% WORO FAeQUIEN#rM r Tf~16O RIATE 80142 131? PACE 3 I AV-@ ____ I...ENOJ 21..i~u. 191.4PME 21MAV UOi.~lO51’.iNEe;W~1CA2SP1tF4i H4PiI**IAPI C, 4DS-I*~4A5-II..... ROJOS 1.....9 PM4 21 MY §So.OOH 512 CH.PN~..IAR
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2013 CFR
2013-10-01
...: Prevention measure Standard Credit(percent) Secondary containment >100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2010 CFR
2010-10-01
...: Prevention measure Standard Credit(percent) Secondary containment > 100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2014 CFR
2014-10-01
...: Prevention measure Standard Credit(percent) Secondary containment >100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2012 CFR
2012-10-01
...: Prevention measure Standard Credit(percent) Secondary containment > 100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
49 CFR 194.105 - Worst case discharge.
Code of Federal Regulations, 2011 CFR
2011-10-01
...: Prevention measure Standard Credit(percent) Secondary containment > 100% NFPA 30 50 Built/repaired to API standards API STD 620/650/653 10 Overfill protection standards API RP 2350 5 Testing/cathodic protection API...
[Study of ammonium-nitrogen removal in suspended carrier biofilm reactor].
Wang, Wen-bin; Qi, Pei-shi
2006-12-01
In order to improve the ammonium-nitrogen (NH4+ -N) biodegradation rate, a suspended carrier was exploited and biofilm was cultivated in three different phases in a sequencing batch reactor (SBR). A flimsy honeycomb-shape biofilm was formed between the endocentric columns on the suspended carrier,which increased the cling amount of nitrobacteria and provided the better condition for nitrobacteria. The bioreactor was operated at the temperature ranges of 24-29 degrees C and pH between 7.8 and 8.2. When the influent COD and NH4+-N concentrations varied in a range of 140-300 mg x L(-1) and 40- 78 mg x L(-1) , respectively, under 90 min aeration, the effluent concentrations were less than 40 mg x L(-1) and 2 mg x L(-1) , respectively. Under 180 min aeration, the influent COD concentration varied from 150 to 350 mg x L(-1) and NH4+-N concentration in the range of 80 - 130 mg x L (-1), the effluent concentration below 45 mg x L(-1) and 3.5 mg x L(-1), respectively. The results indicated that the ammonium-nitrogen biodegradation rate is much greater than that of the conventional activated sludge process. The active fraction of the biofilm is affected by the concentration of substrates in the bulk liquid, the actual metabolic rates within the biofilm, and the thickness of the biofilm. The suspended carrier configuration used in this investigation and the method of cultivating biofilm are beneficial for decreasing biofilm thickness, for increasing the activated biomass of nitrobacteria, and for increasing surface area of the biofilm relative to the volume of the reactors, which insulting in a high rate of nitrification.
[Optimized condition for protoplast isolation from maize, wheat and rice leaves].
Sun, He; Lang, Zhihong; Zhu, Li; Huang, Dafang
2013-02-01
Maize (Zea mays L.), wheat (Triticum aestivum L.) and rice (Oryza sativa L.) are three staple crops and accordingly it is very meaningful to optimize the condition of their protoplasts isolation. The concentration of the enzyme, the time of isolation and centrifugal force in protoplast isolation were investigated to find their effects on protoplast yield and viability using leaves of maize (Zong 3), wheat (Chinese Spring) and rice (Nipponbare). The results show that the concentration of the enzyme and the time of isolation affected the protoplast yield significantly. Although the yield of protoplast was increased with high concentration of enzyme and long incubated time, it led to too much cells breakdown. The orthogonal experimental design results show that the best condition of maize protoplast isolation was Cellulase R-10 1.5%, Macerozyme R-10 0.5%, 50 r/min 7 h, 100 x g 2 min and the protoplasts yield was 7x106 cells/g fresh weight (FW); the best condition of wheat protoplast isolation was Cellulase R-10 1.5%, Macerozyme R-10 0.5%, 50 r/min 5 h, 100 x g 2 min and the protoplasts yield was 6 x 10(6) cells/g FW; the best condition of rice protoplast isolation was Cellulase R-10 2.0%, Macerozyme R-10 0.7%, 50 r/min 7 h, 1 000 x g 2 min and the protoplasts yield was 6x10(6) cells/g FW. The vitalities were more than 90% using fluorescein diacetate staining method. 50%-80% transformation efficiency was obtained when protoplasts were transformed by green fluorescent protein using PEG-Ca2+ method.
Liu, Yu-Jia; Zhao, Tian-Rui; Zhao, Feng-Yun
2013-01-01
In 2010 and 2011, the honey samples of Apis cerana cerana and A. mellifera ligustica were collected from Kunming and Mengzi of Yunnan Province, respectively, aimed to analyze the melissopalynology and tropic niche of the two bee species. The absolute pollen concentration of the honey of A. cerana cerana was 1.55 x 10(4) ind x g(-1), being significantly higher than that (1.01 x 10(4) ind x g(-1)) of A. mellifera ligustica, and the number of nectar plant species collected by A. cerana cerana was 12.9, also significantly higher than that (7.7) collected by A. mellifera ligustica, indicating that A. cerana cerana could utilize more nectar plants, while A. mellifera ligustica had stronger selectivity to the nectar plants. The trophic niche breadth of A. cerana cerana was 0.35, which was significantly higher than that (0.23) of A. mellifera ligustica. The trophic niche overlap index between the two bee species was 0.71, and the interspecific competition index was 0.93, suggesting that the food competition between A. cerana cerana and A. mellifera ligustica was fierce.
Zheng, Jie; Pritts, Wayne A; Zhang, Shuhong; Wittenberger, Steve
2009-12-05
Dimethyl sulfate (DMS) is an alkylating reagent commonly used in organic syntheses and pharmaceutical manufacturing processes. Due to its potential carcinogenicity, the level of DMS in the API process needs to be carefully monitored. However, in-process testing for DMS is challenging because of its reactivity and polarity as well as complex matrix effects. In this short communication, we report a GC-MS method for determination of DMS in an API intermediate that is a methyl sulfate salt. To overcome the complex matrix interference, DMS and an internal standard, d6-DMS, were extracted from the matrix with methyl tert-butyl ether. GC separation was conducted on a DB-624 column (30 m long, 0.32 mm ID, 1.8 microm film thickness). MS detection was performed on a single-quad Agilent MSD equipped with an electron impact source while the MSD signal was acquired in selected ion monitoring mode. This GC/MS method showed a linear response for DMS equivalent from 1.0 to 60 ppm. The practical quantitation limit for DMS was 1.0 ppm and the practical detection limit was 0.3 ppm. The relative standard derivation for analyte response was found as 0.1% for six injections of a working standard equivalent to 18.6 ppm of DMS. The spike recovery was ranged from 102.1 to 108.5% for a sample of API intermediate spiked with 8.0 ppm of DMS. In summary, the GC/MS method showed adequate specificity, linearity, sensitivity, repeatability and accuracy for determination of DMS in the API intermediate. This method has been successfully applied to study the efficiency of removing DMS from the process.
Nonlinear Viscoelastic Breakup in a High-Velocity Airstream.
1981-03-01
viscoelasticity PMMA /Poly (ethyl/butylacrylate) Jet analysis Extensional viscosity 106 SdhACV a. -- N .MM~OMW I~*it l -,’ bi. ab Weiss and Worshern’s...Zero shear viscosity (viscosity-avg.) %/ poise Polymethyl- 6 x 106 2.1 100. methacrylate ( PMMA ) 1.5 16. 1.0 2.0 0.5 0.3 Copolymer 80% PMMA 20% Polyethyl...Measured 2.1% Poly(methylmethacrylate) /diethylmalonate ( PMMA /DEM) 210 1980 + 250 (400) 1.5% PMMA /DEM 110 1780 + 200 (250) 1.0% PMMA /DEM 60 1480 + 150
Guo, Feng-Xia; Zeng, Yang; Li, Jin-Ping; Chen, Zhen-Ning; Ma, Ji-Xiong
2013-04-01
The enzyme-inhibitor model and the sugar tolerance mouse model were used to evaluate the relationship between the inhibition rate of enzyme activity and concentration of Hippophae rhamnoides L. subsp. chinensis Rousi polysaccharide (HRP). The inhibitory patterns of enzyme and dose-dependent effects of HRP's effect on blood glucose using acarbose tablets as control were also examined. The mechanism underlying hypoglycemic effects of HRP was discussed. The results showed: in the enzyme-inhibitor model, the inhibitory activity of different concentrations of HRP (9.80, 19.60, 39.20, 78.40, 156.80 and 312.50 mg x L(-1)) on alpha-glucosaminidase (AG) inhibitory activity were 6.62%, 18.02%, 33.26%, 48.23%, 62.11%, 76.31%, 90.12%, IC50 was 31.59 mg x L(-1). The inhibitory rate of 25.00 x 10(3) mg x L(-1) acarbose tablets was only 64.87%, and IC50 was 10.75 x 10(3) mg x L(-1). In the sugar tolerance mouse model, different doses of HRP (240, 480, 960 mg x kg(-1)) tended to decrease levels of blood glucose compared with control group (acarbose tablets 375 mg x kg(-1)) at 15, 30, 60 and 120 min. It's further confirmed that HRP is a kind of competitive inhibitor of AG activity. Its inhibition rate increases with the increase of concentration in normal mice, and it subsequently improves the sugar tolerance showing the effect of reducing blood sugar.
A Study of Flicker Noise in MOSFETS.
1980-05-01
Rooge’s Parameter , which often has a value around 2 x 10- . With the help of Eq. (9) a number of data can then be explained. There are several experiments...bias is described by Sid(f)/V2 = (q212 w/L 2f) INT(Ef)ieff/C (5) where w is the device width, L is length and e is McWhorter’s tunneling parameter ...18. A. L. McWhorter, 1/f Noise and Related Surface Effects in Germanium, MIT Lincoln Lab. Rept., No. 80, May 1955. 19. F. N. Hooge , Physica 60, 130
BEYOND THE MEDICINE CABINET: AN ANALYSIS OF WHERE AND WHY MEDICATIONS ACCUMULATE
Active pharmaceutical ingredients (APIs) from medications can enter the environment as trace contaminants, at individual concentrations generally below a part per billion (μg/L). APIs enter the environment primarily via the discharge of raw and treated sewage. Residues of unmet...
Gattinger, Pia; Lupinek, Christian; Kalogiros, Lampros; Silar, Mira; Zidarn, Mihaela; Korosec, Peter; Koessler, Christine; Novak, Natalija; Valenta, Rudolf; Mittermann, Irene
2018-01-01
Allergy to bee and wasp venom can lead to life-threatening systemic reactions. The identification of the culprit species is important for allergen-specific immunotherapy. To determine a panel of recombinant bee and wasp allergens which is suitable for the identification of bee or wasp as culprit allergen sources and to search for molecular surrogates of clinical severity of sting reactions. Sera from eighty-seven patients with a detailed documentation of their severity of sting reaction (Mueller grade) and who had been subjected to titrated skin testing with bee and wasp venom were analyzed for bee and wasp-specific IgE levels by ImmunoCAPTM. IgE-reactivity testing was performed using a comprehensive panel of recombinant bee and wasp venom allergens (rApi m 1, 2, 3, 4, 5 and 10; rVes v 1 and 5) by ISAC chip technology, ImmunoCAP and ELISA. IgG4 antibodies to rApi m 1 and rVes v 5 were determined by ELISA and IgE/IgG4 ratios were calculated. Results from skin testing, IgE serology and IgE/IgG4 ratios were compared with severity of sting reactions. The panel of rApi m 1, rApi m 10, rVes v 1 and rVes v 5 allowed identification of the culprit venom in all but two of the 87 patients with good agreement to skin testing. Severities of sting reactions were not associated with results obtained by skin testing, venom-specific IgE levels or molecular diagnosis. Severe sting reactions were observed in patients showing < 1 ISU and < 2kUA/L of IgE to Api m 1 and/or Ves v 5. We identified a minimal panel of recombinant bee and wasp allergens for molecular diagnosis which may permit identification of bee and/or wasp as culprit insect in venom-sensitized subjects. The severity of sting reactions was not associated with parameters obtained by molecular diagnosis.
Somanathan, Hema; Warrant, Eric J; Borges, Renee M; Wallén, Rita; Kelber, Almut
2009-08-01
Bees of the genus Apis are important foragers of nectar and pollen resources. Although the European honeybee, Apis mellifera, has been well studied with respect to its sensory abilities, learning behaviour and role as pollinators, much less is known about the other Apis species. We studied the anatomical spatial resolution and absolute sensitivity of the eyes of three sympatric species of Asian honeybees, Apis cerana, Apis florea and Apis dorsata and compared them with the eyes of A. mellifera. Of these four species, the giant honeybee A. dorsata (which forages during moonlit nights) has the lowest spatial resolution and the most sensitive eyes, followed by A. mellifera, A. cerana and the dwarf honeybee, A. florea (which has the smallest acceptance angles and the least sensitive eyes). Moreover, unlike the strictly diurnal A. cerana and A. florea, A. dorsata possess large ocelli, a feature that it shares with all dim-light bees. However, the eyes of the facultatively nocturnal A. dorsata are much less sensitive than those of known obligately nocturnal bees such as Megalopta genalis in Panama and Xylocopa tranquebarica in India. The differences in sensitivity between the eyes of A. dorsata and other strictly diurnal Apis species cannot alone explain why the former is able to fly, orient and forage at half-moon light levels. We assume that additional neuronal adaptations, as has been proposed for A. mellifera, M. genalis and X. tranquebarica, might exist in A. dorsata.
Phosphorus fertilizer and grazing management effects on phosphorus in runoff from dairy pastures.
Dougherty, Warwick J; Nicholls, Paul J; Milham, Paul J; Havilah, Euie J; Lawrie, Roy A
2008-01-01
Fertilizer phosphorus (P) and grazing-related factors can influence runoff P concentrations from grazed pastures. To investigate these effects, we monitored the concentrations of P in surface runoff from grazed dairy pasture plots (50 x 25 m) treated with four fertilizer P rates (0, 20, 40, and 80 kg ha(-1) yr(-1)) for 3.5 yr at Camden, New South Wales. Total P concentrations in runoff were high (0.86-11.13 mg L(-1)) even from the control plot (average 1.94 mg L(-1)). Phosphorus fertilizer significantly (P < 0.001) increased runoff P concentrations (average runoff P concentrations from the P(20), P(40), and P(80) treatments were 2.78, 3.32, and 5.57 mg L(-1), respectively). However, the magnitude of the effect of P fertilizer varied between runoff events (P < 0.01). Further analysis revealed the combined effects on runoff P concentration of P rate, P rate x number of applications (P < 0.001), P rate x time since fertilizer (P < 0.001), dung P (P < 0.001), time since grazing (P < 0.05), and pasture biomass (P < 0.001). A conceptual model of the sources of P in runoff comprising three components is proposed to explain the mobilization of P in runoff and to identify strategies to reduce runoff P concentrations. Our data suggest that the principal strategy for minimizing runoff P concentrations from grazed dairy pastures should be the maintenance of soil P at or near the agronomic optimum by the use of appropriate rates of P fertilizer.
Wei, Tao; Jin, Fei; Guan, Runnan; Huang, Jing; Chen, Muqing; Li, Qunxiang; Yang, Shangfeng
2018-02-11
Rare-earth metals have been mostly entrapped into fullerene cages to form endohedral clusterfullerenes, whereas non-Group-3 transition metals that can form clusterfullerenes are limited to titanium (Ti) and vanadium (V), and both are exclusively entrapped within an I h -C 80 cage. Non-Group-3 transition-metal-containing endohedral fullerenes based on a C 80 cage with D 5h symmetry, V x Sc 3-x N@D 5h -C 80 (x=1, 2), have now been synthesized, which exhibit two variable cluster compositions. The molecular structure of VSc 2 N@D 5h -C 80 was unambiguously determined by X-ray crystallography. According to a comparative study with the reported Ti- and V-containing clusterfullerenes based on a I h -C 80 cage and the analogous D 5h -C 80 -based metal nitride clusterfullerenes containing rare-earth metals only, the decisive role of the non-Group-3 transition metal on the formation of the corresponding D 5h -C 80 -based clusterfullerenes is unraveled. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Yazici, Y; Sokka, T; Kautiainen, H; Swearingen, C; Kulman, I; Pincus, T
2005-01-01
Objective: To analyse patients with rheumatoid arthritis, treated with methotrexate in a weekly academic rheumatology clinic over 13 years, for continuation of courses and reasons for discontinuation. Methods: All 248 patients with an analysable longitudinal course who took methotrexate in standard care between 1990 and 2003 were studied. Continuation of courses was analysed using life tables. All abnormal and severely abnormal values for aspartate aminotransferase (AST) >40 U/l, >80 U/l, albumin <35 g/l, <30 g/l, white blood cell (WBC) count <4.0x109/l, <3.0x109/l, and platelet count <150x109/l, <100x109/l, were identified. Responses of the clinician and subsequent laboratory values were reviewed. Results: Over 1007 person-years, the probability of continuing methotrexate over five years was 79% (95% confidence interval, 72% to 84%). Severe laboratory abnormalities occurred in 2.9 per 100 person-years, specifically 0.9 for AST >80 U/l, 1.1 for albumin <30 g/l, 0.7 for WBC <3.0x109/l, and 0.3 for platelets <100x109/l. No severe laboratory abnormality progressed to further severity or clinical disease. Permanent discontinuations of methotrexate occurred in 46 patients (19%), 26 (10% of all patients) for adverse effects, 15 (32.6%) for inefficacy; only two discontinuations resulted from laboratory abnormalities, both of WBC, possibly from other sources. Conclusions: Methotrexate was associated with a high rate of continuation, and few clinically significant laboratory abnormalities. Discontinuation primarily reflected clinical rather than laboratory findings. Vigilance for methotrexate toxicity is required but methotrexate appears among the safest treatments for rheumatoid arthritis. PMID:15208176
2009-01-01
with a modified FastMoc 0.25 procedure using an Fmoc-strategy starting from Rink amide resin (Novabiochem, San Diego, CA, 0.5 mM/g). The Fmoc protecting...In vitro release of amylase by culekinins in two insects: Opsinia arenosella (Lepidoptera) and Rhynchophorus ferrugineus (Coleoptera). Trends Life...Drosophila melanogaster and the honey bee Apis mellifera. Prog. Neurobiol. 80, 1–19. Holman, G.M., Nachman, R.J., Wright, M.S., 1990. Insect
Telford, Sam R
2010-02-01
The Florida kingsnake, Lampropeltis getula floridana, is host to 3 species of Hepatozoon at the type locality, Miramar, Broward County, Florida, and 2, possibly all 3, species at Cedar Key, Levy County, approximately 480 km to the northwest. Hepatozoon eurytopis, n. sp. was present also in Diadophis punctatus and Elaphe guttata in Jupiter Farms, Palm Beach County, and in Thamnophis sirtalis at Gainesville, Alachua County. Specific identity in D. punctatus was determined from gamont morphology and from sporogonic stages and gamont morphology in the infections obtained from E. guttata and T. sirtalis. Infection with all 3 species by ingestion of infected mosquitoes was easily obtained in E. guttata, but only H. eurytopis produced experimental infection in T. sirtalis and Storeria occipitomaculata. Hepatozoon eurytopis differed from the other 2 species, H. karyolysi n. sp. and H. rexi n. sp., by its short and broad, recurved gamonts with average dimensions 11.2-13.1 x 4.5-5.4 microm, length x maximum width (LW) 56-64 microm(2), and L/W ratios 2.13-2.80 in all host species, large round oocysts 95-303 x 91-285 microm, L/W ratios 1.03-1.05 with spherical to ovoid sporocysts 22-50 x 21-44 microm, L/W ratios 1.00-1.82 that contain 33.5-44.4 (16-76) sporozoites. The nucleus in immature gamonts is highly irregular, often fragmented in separate masses of chromatin, and commonly appears to form binucleate gamonts before maturity. Hepatozoon karyolysi has elongate, non-recurved gamonts, 15-20 x 4-7 microm, LW 64-143 microm(2), L/W ratios 2.3-4.5 that usually cause lysis or irregular margins of the nucleus in infected erythrocytes of the type host. Oocysts are spherical, 127-243 x 122-233 microm, L/W ratio 1.0-1.1 that contain spherical to usually ovoid sporocysts 17-30 x 17-24 microm, and produce 12-20 sporozoites. Gamonts of Hepatozoon rexi are non-recurved, 14-18 x 4-6 microm, LW 67-102 microm(2), and L/W ratio 2.8-4.1, and are usually surrounded by a prominent cyst wall within the host erythrocyte. Oocysts are nearly spherical, 103-178 x 103-172 microm, form usually elongate sporocysts, 30-39 x 20-25 microm L/W ratio 1.33-1.94 that contain 16-36 sporozoites. An oocyst of H. eurytopis was present in the salivary gland of an infected Aedes aegypti , which is the second report of sporogony by a Hepatozoon species occurring in this site.
The Role of Vision and Mechanosensation in Insect Flight Control
2012-01-01
intensity. We used bumblebees (Bombus terrestris), honeybees ( Apis mellifera ), the common wasp (Vespa vulgaris), hornets (Vespa crabro) flies (Mousca...bees ( Apis mellifera L.). J. Exp. Biol. 209, 978-984. Beyeler, A., Zufferey, J.-C. and Floreano, D. (2009). Vision-based control of near- obstacle
HDF-EOS 2 and HDF-EOS 5 Compatibility Library
NASA Technical Reports Server (NTRS)
Ullman, Richard; Bane, Bob; Yang, Jingli
2008-01-01
The HDF-EOS 2 and HDF-EOS 5 Compatibility Library contains C-language functions that provide uniform access to HDF-EOS 2 and HDF-EOS 5 files through one set of application programming interface (API) calls. ("HDFEOS 2" and "HDF-EOS 5" are defined in the immediately preceding article.) Without this library, differences between the APIs of HDF-EOS 2 and HDF-EOS 5 would necessitate writing of different programs to cover HDF-EOS 2 and HDF-EOS 5. The API associated with this library is denoted "he25." For nearly every HDF-EOS 5 API call, there is a corresponding he25 API call. If a file in question is in the HDF-EOS 5 format, the code reverts to the corresponding HDF-EOS 5 call; if the file is in the HDF-EOS 2 format, the code translates the arguments to HDF-EOS 2 equivalents (if necessary), calls the HDFEOS 2 call, and retranslates the results back to HDF-EOS 5 (if necessary).
[Metabolic kinetics of MN9202 in Beagle dog liver microsomes].
Yang, Zhi-fu; Zhou, Si-yuan; Mei, Qi-bing; Yang, Tie-hong; Liu, Zhen-guo
2005-11-01
To study the metabolic kinetics of MN9202 in Beagle dog liver microsome. Beagle dog liver microsomes were prepared by using ultracentrifuge method. After incubating 0.4 micromol x L(-1) MN9202 with 1 g x L(-1) microsomes for 30 min at 37 degrees C, the reaction was terminated by adding 0.5 mL alkalization. The RP-HPLC was used to determine the drug in the incubation mixture. The Michaelis-Menten parameters Km, and Vmax in Beagle dog liver microsomes were initially estimated by analyzing Lineweave-Brurk plot. Various selective CYP inhibitors were used to investigate their inhibitory effect on the metabolism of MN9202. The Km, Vmax and CLint of MN9202 were (22.6 +/- 8.0) micromol x L(-1), (0.54 +/- 0.17) micromol x g(-1) x min(-1) and (0.0242 +/- 0.0009) L x g(-1) x min(-1), respectively. The metabolism of MN9202 was significantly inhibited by ketoconazole (Ket) and troleandomycin (Tro) in Beagle dog liver microsomes. Tranylcypromine (Tra) could inhibit the metabolism of drug as well. While other inhibitors showed little inhibitory effect on the metabolism of MN9202. It was shown that CYP3A and CYP2C19 were involved in MN9202 metabolism. The inhibitors of human CYP3A and CYP2C19 may have potential interaction with MN9202, and this can reduce the metabolism rate and increase the toxicity of MN9202.
Vials, A.; Burnstock, G.
1992-01-01
1. The effects of L-NG-nitroarginine (L-NOARG) and L-NG-nitroarginine methyl ester (L-NAME) on vasodilatation induced by ATP, substance P, 5-hydroxytryptamine (5-HT), bradykinin and sodium nitroprusside (SNP) were examined in the guinea-pig coronary bed, by use of a Langendorff technique. The effects of these inhibitors of nitric oxide synthesis were assessed on their ability to inhibit both the amplitude and the area of the vasodilator response. 2. The vasodilator responses evoked by low doses of 5-HT (5 x 10(-10)-10(-8) mol) were almost abolished by L-NAME and L-NOARG (both at 10(-5), 3 x 10(-5) and 10(-4) M), although L-NOARG (3 x 10(-5) M) was significantly less potent than L-NAME (3 x 10(-5) M) as an inhibitor of vasodilator responses to 5-HT (5 x 10(-8) mol). 3. The vasodilator responses evoked by substance P (5 x 10(-12)-5 x 10(-9) mol) were reduced in the presence of L-NAME and L-NOARG (both at 10(-5) and 3 x 10(-5) M). The response to substance P was almost abolished by L-NAME and L-NOARG (both at 10(-4) M). 4. The amplitude of the vasodilator responses to ATP (5 x 10(-11) and 5 x 10(-9)-5 x 10(-7) mol) was little affected by either L-NAME or L-NOARG (both at 10(-5), 3 x 10(-5) and 10(-4) M).(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1384916
Standard methods for Apis mellifera propolis research
USDA-ARS?s Scientific Manuscript database
Propolis is one of the most fascinating honey bee (Apis mellifera L.) products. It is a plant derived product that bees produce from resins that they collect from different plant organs and with which they mix beeswax. Propolis is a building material and a protective agent in the beehive. It also pl...
Responses of Varroa-resistant honey bees (Apis mellifera L.) to Deformed wing virus
USDA-ARS?s Scientific Manuscript database
The negative impact of Deformedwing virus (DWV) on European honey bees Apis mellifera is magnified by Varroa destructor parasitism. This study compared the responses of two Varroa-resistant honey bee stocks, pure Russian honey bees (RHB) and out-crossed Varroa Sensitive Hygienic bees, Pol-line (POL)...
Saglam, Atiye Seda Yar; Alp, Ebru; Elmazoglu, Zubeyir; Menevse, Emine Sevda
2016-01-01
The activation of the phosphatidylinositol-3 kinase/v-akt murine thymoma viral oncogene homolog (Akt) and mitogen activated protein kinase kinase/extracellular signal-regulated kinase (ERK) pathways are implicated in the majority of cancers. Selective inhibition of Akt and ERK represents a potential approach for cancer therapy. Therefore, the present study aimed to investigate the apoptotic and anti-proliferative effects of the novel and selective Akt inhibitor 4-amino-5,8-dihydro-5-oxo-8-β-D-ribofuranosyl-pyrido[2,3-d]pyrimidine-6-carboxamide (API-1) and selective ERK1/2 inhibitor FR180204 (FR) alone and in combination on colorectal cancer (CRC) cells (DLD-1 and LoVo). In addition, the effects of API-1 and FR on Akt and ERK signaling pathways were also investigated. The effects of the agents on DLD-1 and LoVo cells were evaluated in terms of cell viability, cytotoxicity, DNA synthesis rate, DNA fragmentation and caspase-3 activity levels. In addition, quantitative reverse transcription-polymerase chain reaction and western blot analysis were performed to examine relevant mRNA and protein levels. The present study observed that the combination of FR with API-1 resulted in significant apoptosis and cytotoxicity compared with any single agent alone in a time-dependent manner in these cells. Also, treatment with FR and API-1 in combination decreased the expression levels of B-cell lymphoma-2 (BCL2), Bcl-2-like1, cyclin D1 and cMYC, and increased the expression levels of BCL2-associated X protein and BCL2 antagonist/killer via phosphorylated Akt and phosphorylated ERK1/2 downregulation. The combination of Akt and ERK1/2 inhibitors resulted in enhanced apoptotic and anti-proliferative effects against CRC cells. The present study hypothesizes that the combination of FR and API-1 in CRC cells may contribute toward potential anti-carcinogenic effects. Additional analyses using other cancer cell lines and animal models are required to confirm these findings in vitro and in vivo. PMID:27698814
Saglam, Atiye Seda Yar; Alp, Ebru; Elmazoglu, Zubeyir; Menevse, Emine Sevda
2016-10-01
The activation of the phosphatidylinositol-3 kinase/v-akt murine thymoma viral oncogene homolog (Akt) and mitogen activated protein kinase kinase/extracellular signal-regulated kinase (ERK) pathways are implicated in the majority of cancers. Selective inhibition of Akt and ERK represents a potential approach for cancer therapy. Therefore, the present study aimed to investigate the apoptotic and anti-proliferative effects of the novel and selective Akt inhibitor 4-amino-5,8-dihydro-5-oxo-8-β-D-ribofuranosyl-pyrido[2,3-d]pyrimidine-6-carboxamide (API-1) and selective ERK1/2 inhibitor FR180204 (FR) alone and in combination on colorectal cancer (CRC) cells (DLD-1 and LoVo). In addition, the effects of API-1 and FR on Akt and ERK signaling pathways were also investigated. The effects of the agents on DLD-1 and LoVo cells were evaluated in terms of cell viability, cytotoxicity, DNA synthesis rate, DNA fragmentation and caspase-3 activity levels. In addition, quantitative reverse transcription-polymerase chain reaction and western blot analysis were performed to examine relevant mRNA and protein levels. The present study observed that the combination of FR with API-1 resulted in significant apoptosis and cytotoxicity compared with any single agent alone in a time-dependent manner in these cells. Also, treatment with FR and API-1 in combination decreased the expression levels of B-cell lymphoma-2 (BCL2), Bcl-2-like1, cyclin D1 and cMYC, and increased the expression levels of BCL2-associated X protein and BCL2 antagonist/killer via phosphorylated Akt and phosphorylated ERK1/2 downregulation. The combination of Akt and ERK1/2 inhibitors resulted in enhanced apoptotic and anti-proliferative effects against CRC cells. The present study hypothesizes that the combination of FR and API-1 in CRC cells may contribute toward potential anti-carcinogenic effects. Additional analyses using other cancer cell lines and animal models are required to confirm these findings in vitro and in vivo .
Agglomeration behavior of lipid-capped gold nanoparticles
NASA Astrophysics Data System (ADS)
Ranjan, Rajeev; Kirillova, Maria A.; Esimbekova, Elena N.; Zharkov, Sergey M.; Kratasyuk, Valentina A.
2018-04-01
The current investigation deciphers aggregation pattern of gold nanoparticles (AuNPs) and lipid-treated AuNPs when subjected to aqueous sodium chloride solution with increasing ionic strengths (100-400 nM). AuNPs were synthesized using 0.29 mM chloroauric acid and by varying the concentrations of trisodium citrate (AuNP1 1.55 mM, AuNP2 3.1 mM) and silver nitrate (AuNP3 5.3 μM, AuNP4 10.6 μM) with characteristic LSPR peaks in the range of 525-533 nm. TEM analysis revealed AuNPs to be predominantly faceted nanocrystals with the average size of AuNP1 to be 35 ± 5 nm, AuNP2 15 ± 5 nm, AuNP3 30 ± 5 nm, and AuNP4 30 ± 5 nm and the zeta-average for AuNPs were calculated to be 31.23, 63.80, 26.08, and 28 nm respectively. Induced aggregation was observed within 10 s in all synthesized AuNPs while lipid-treated AuNP2 (AuNP2-L) was found to withstand ionic interferences at all concentration levels. However, lipid-treated AuNPs synthesized using silver nitrate and 1.55 mM trisodium citrate (AuNP3, AuNP4) showed much lower stability. The zeta potential values of lipid-treated AuNPs (AuNP1-L-1 x/200, - 17.93 ± 1.02 mV; AuNP2-L-1 x/200, - 21.63 ± 0.70; AuNP3-L-1 x/200, - 14.54 ± 0.90; AuNP3-L-1 x/200 - 13.77 ± 0.83) justified these observations. To summarize, AuNP1 and AuNP2 treated with lipid mixture 1 equals or above 1 x/200 or 1 x/1000 respectively showed strong resistance against ionic interferences (up to 400 mM NaCl). Use of lipid mixture 1 for obtaining highly stable AuNPs also provided functional arms of various lengths which can be used for covalent coupling. [Figure not available: see fulltext.
Production, purification and characterization of l-asparaginase from streptomyces gulbargensis.
Amena, S; Vishalakshi, N; Prabhakar, M; Dayanand, A; Lingappa, K
2010-01-01
L-asparaginase is an anti-neoplastic agent used in the lymphoblastic leukaemia chemotherapy. In the present study a novel strain, Streptomyces gulbargensis was explored for the production of extra-cellular L-asparaginase using groundnut cake extract. The optimum pH, temperature, inoculum size and agitation speed for enzyme production were pH 8.5, 40°C, 1x10(8)spores/ml and 200 rev/min respectively. Maltose (0.5%) and L-asparagine (0.5%) proved to be the best carbon and nitrogen sources respectively. The enzyme was purified 82.12 fold and the apparent molecular weight of the enzyme was found to be 85 kDa. The optima pH and temperature for the enzyme were 9.0 and 40°C respectively. The enzyme was more stable at the alkaline pH than at the acidic one and it retained 55% of the activity at 80°C for 60 min.
Vassou, Sophie Lorraine; Nithaniyal, Stalin; Raju, Balaji; Parani, Madasamy
2016-07-18
Ayurveda is a system of traditional medicine that originated in ancient India, and it is still in practice. Medicinal plants are the backbone of Ayurveda, which heavily relies on the plant-derived therapeutics. While Ayurveda is becoming more popular in several countries throughout the World, lack of authenticated medicinal plant raw drugs is a growing concern. Our aim was to DNA barcode the medicinal plants that are listed in the Ayurvedic Pharmacopoeia of India (API) to create a reference DNA barcode library, and to use the same to authenticate the raw drugs that are sold in markets. We have DNA barcoded 347 medicinal plants using rbcL marker, and curated rbcL DNA barcodes for 27 medicinal plants from public databases. These sequences were used to create Ayurvedic Pharmacopoeia of India - Reference DNA Barcode Library (API-RDBL). This library was used to authenticate 100 medicinal plant raw drugs, which were in the form of powders (82) and seeds (18). Ayurvedic Pharmacopoeia of India - Reference DNA Barcode Library (API-RDBL) was created with high quality and authentic rbcL barcodes for 374 out of the 395 medicinal plants that are included in the API. The rbcL DNA barcode differentiated 319 species (85 %) with the pairwise divergence ranging between 0.2 and 29.9 %. PCR amplification and DNA sequencing success rate of rbcL marker was 100 % even for the poorly preserved medicinal plant raw drugs that were collected from local markets. DNA barcoding revealed that only 79 % raw drugs were authentic, and the remaining 21 % samples were adulterated. Further, adulteration was found to be much higher with powders (ca. 25 %) when compared to seeds (ca. 5 %). The present study demonstrated the utility of DNA barcoding in authenticating medicinal plant raw drugs, and found that approximately one fifth of the market samples were adulterated. Powdered raw drugs, which are very difficult to be identified by taxonomists as well as common people, seem to be the easy target for adulteration. Developing a quality control protocol for medicinal plant raw drugs by incorporating DNA barcoding as a component is essential to ensure safety to the consumers.
NASA Astrophysics Data System (ADS)
Qiao, Yu; Ren, Shan-Shan; Liu, Li-Hui; Guan, Wei-Sheng; Li, Zhi-Min; Che, Guang-Bo; Liu, Chun-Bo; Wang, Yan-Yan; Wang, Qing-Wei; Li, Xiu-Ying; Zhu, En-Wei
2018-06-01
A new coordination polymeric zinc(II) complex, namely, [Zn2(L)(H2O)3]n·nNO3(1), (H3L = 5-(4-(tetrazol-5-yl)phenyl)isophthalic acid) has been synthesized under solvothermal conditions and structurally characterized by elemental analysis, IR spectroscopy, single-crystal X-ray diffraction analysis and powder X-ray diffraction. Complex 1 exhibits a three-dimensional structure with a Schläfli symbol of 44•69•82 topologies, constructed from two crystallographically independent five and six coordinated mode with metal center and connected H3L ligands. The complex has good thermal stability and excellent photoluminescent property. Furthermore, by comparing the photoluminescent and photocatalytic mutation results induced by interconversion of metal ions, we confirm that the properties mutation induced by metal ions is much controllable and obvious. In addition, the complex exhibits significantly enhanced photocatalytic activity for methylene blue (MB) under UV light irradiation (λ < 400 nm), and the degradation rate could reach 75% in 80 min. Meanwhile trapping experiments indicated that the •O2- and h+ are the main activated species.
Ma, Zhongsen; Hu, Hualei; Sun, Zhongqiang; Fang, Wenting; Zhang, Jian; Yang, Longfei; Zhang, Yajie; Wang, Lei
2017-04-22
Zeolite L was synthesized by the hydrothermal method and post-treated by NH 4 exchange to adjust its acidity. The samples were systematic characterized by various techniques including XRD, X-ray fluorescence spectroscopy, N 2 adsorption-desorption, scanning electron microscopy, pyridine IR spectroscopy, and NH 3 temperature-programmed desorption. The results demonstrated that the NH 4 -exchange post-treatment increased the surface area, micropore volume, and acidity of zeolite L. The catalytic performance of the samples was tested in the dehydration of fructose to 5-hydroxymethylfurfural (HMF) in ionic liquid (1-butyl-3-methylimidazolium bromide, [bmim]Br). 99.1 % yield of HMF was obtained when the KL-80 °C-1 h sample (KL zeolite treated with 1 m NH 4 NO 3 solution at 80 °C for 1 h) was used. The high efficiency could be attributed to the appropriate acid properties of the catalyst. The zeolite catalyst could be reused four times without significant decrease in activity. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
NASA Astrophysics Data System (ADS)
Lestari, Yulinda; Priyotomo, Gadang
2018-05-01
Taro leaf (Colocasia esculenta) has the potential to be used as a corrosion inhibitor because it has a substance called polyphenol that binds to the hydroxyl group and essential amino acids. Taro leaf extract is taken by maceration method. In this study, the specimen was steel API 5L grade B that would measured the corosivity in 0.1 M HCl solution + taro leaf extract with a specific concentration (in ppm). Tests conducted by FTIR method taro leaves, potentiodynamic polarization (Tafel) and Electrochemical Impedance Spectroscopy (EIS). Based on the results revealed that there is a phenolic group in taro leaves, which has polyphenol content 0.053 % (mg/100 mg). The optimum composition of taro leaf extract is 4000 ppm which generate corrosion rate value of 30.22 mpy and efficiency inhibitor performance of 72.7 %. In this study, the Kads value of taro leaf extract ranged from 0.885 to greater than Kads value of ginger extract in hydrochloric acid solution. The high Kads values indicate a more efficient process of adsorption and better value of inhibition efficiency.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hammel, Michal; Yu, Yaping; Radhakrishnan, Sarvan K.
DNA double-strand break (DSB) repair by non-homologous end joining (NHEJ) in human cells is initiated by Ku heterodimer binding to a DSB, followed by recruitment of core NHEJ factors including DNA-dependent protein kinase catalytic subunit (DNA-PKcs), XRCC4-like factor (XLF), and XRCC4 (X4)-DNA ligase IV (L4). Ku also interacts with accessory factors such as aprataxin and polynucleotide kinase/phosphatase-like factor (APLF). But, how these factors interact to tether, process, and ligate DSB ends while allowing regulation and chromatin interactions remains enigmatic. Here, small angle X-ray scattering (SAXS) and mutational analyses show APLF is largely an intrinsically disordered protein that binds Ku, Ku/DNA-PKcsmore » (DNA-PK), and X4L4 within an extended flexible NHEJ core complex. X4L4 assembles with Ku heterodimers linked to DNA-PKcs via flexible Ku80 C-terminal regions (Ku80CTR) in a complex stabilized through APLF interactions with Ku, DNA-PK, and X4L4. Our collective results unveil the solution architecture of the six-protein complex and suggest cooperative assembly of an extended flexible NHEJ core complex that supports APLF accessibility while possibly providing flexible attachment of the core complex to chromatin. The resulting dynamic tethering furthermore, provides geometric access of L4 catalytic domains to the DNA ends during ligation and of DNA-PKcs for targeted phosphorylation of other NHEJ proteins as well as trans-phosphorylation of DNA-PKcs on the opposing DSB without disrupting the core ligation complex. Overall the results shed light on evolutionary conservation of Ku, X4, and L4 activities, while explaining the observation that Ku80CTR and DNA-PKcs only occur in a subset of higher eukaryotes.« less
Hammel, Michal; Yu, Yaping; Radhakrishnan, Sarvan K.; ...
2016-11-14
DNA double-strand break (DSB) repair by non-homologous end joining (NHEJ) in human cells is initiated by Ku heterodimer binding to a DSB, followed by recruitment of core NHEJ factors including DNA-dependent protein kinase catalytic subunit (DNA-PKcs), XRCC4-like factor (XLF), and XRCC4 (X4)-DNA ligase IV (L4). Ku also interacts with accessory factors such as aprataxin and polynucleotide kinase/phosphatase-like factor (APLF). But, how these factors interact to tether, process, and ligate DSB ends while allowing regulation and chromatin interactions remains enigmatic. Here, small angle X-ray scattering (SAXS) and mutational analyses show APLF is largely an intrinsically disordered protein that binds Ku, Ku/DNA-PKcsmore » (DNA-PK), and X4L4 within an extended flexible NHEJ core complex. X4L4 assembles with Ku heterodimers linked to DNA-PKcs via flexible Ku80 C-terminal regions (Ku80CTR) in a complex stabilized through APLF interactions with Ku, DNA-PK, and X4L4. Our collective results unveil the solution architecture of the six-protein complex and suggest cooperative assembly of an extended flexible NHEJ core complex that supports APLF accessibility while possibly providing flexible attachment of the core complex to chromatin. The resulting dynamic tethering furthermore, provides geometric access of L4 catalytic domains to the DNA ends during ligation and of DNA-PKcs for targeted phosphorylation of other NHEJ proteins as well as trans-phosphorylation of DNA-PKcs on the opposing DSB without disrupting the core ligation complex. Overall the results shed light on evolutionary conservation of Ku, X4, and L4 activities, while explaining the observation that Ku80CTR and DNA-PKcs only occur in a subset of higher eukaryotes.« less
Qing, Si-han; Chang, Yun-feng; Dong, Xiao-ai; Li, Yuan; Chen, Xiao-gang; Shu, Yong-kang; Deng, Zhen-hua
2013-10-01
To establish the mathematical models of stature estimation for Sichuan Han female with measurement of lumbar vertebrae by X-ray to provide essential data for forensic anthropology research. The samples, 206 Sichuan Han females, were divided into three groups including group A, B and C according to the ages. Group A (206 samples) consisted of all ages, group B (116 samples) were 20-45 years old and 90 samples over 45 years old were group C. All the samples were examined lumbar vertebrae through CR technology, including the parameters of five centrums (L1-L5) as anterior border, posterior border and central heights (x1-x15), total central height of lumbar spine (x16), and the real height of every sample. The linear regression analysis was produced using the parameters to establish the mathematical models of stature estimation. Sixty-two trained subjects were tested to verify the accuracy of the mathematical models. The established mathematical models by hypothesis test of linear regression equation model were statistically significant (P<0.05). The standard errors of the equation were 2.982-5.004 cm, while correlation coefficients were 0.370-0.779 and multiple correlation coefficients were 0.533-0.834. The return tests of the highest correlation coefficient and multiple correlation coefficient of each group showed that the highest accuracy of the multiple regression equation, y = 100.33 + 1.489 x3 - 0.548 x6 + 0.772 x9 + 0.058 x12 + 0.645 x15, in group A were 80.6% (+/- lSE) and 100% (+/- 2SE). The established mathematical models in this study could be applied for the stature estimation for Sichuan Han females.
Šelb, J; Kogovšek, R; Šilar, M; Košnik, M; Korošec, P
2016-04-01
No study has assessed the diagnostic sensitivity of rApi m 1 and rVes v 5 on Immulite testing system. To compare the diagnostic sensitivity of commercially available venom recombinant allergens between the currently available immunoassays [ImmunoCAP (CAP) and Immulite (LITE)] and establish their correlation with the severity of the sting reaction. This study evaluated 95 bee venom and 110 yellow jacket venom-allergic subjects. We measured the levels of sIgE to rApi m 1, rVes v 5 (LITE and CAP), rApi m 2 (LITE), rVes v 1 (CAP) and total IgE (CAP). Forty-nine healthy subjects served as controls. The diagnostic sensitivity of rApi m 1 and rVes v 5 was significantly higher with the LITE than with the CAP system (71% vs. 88% and 82% vs. 93%). The specificity of both assays for both allergens was between 94% and 98%. Twenty-nine patients that tested negative for rApi m 1 or rVes v 5 with CAP were positive with LITE, but none of the patients that tested negative with LITE were positive with CAP. The positive values of rApi m 1 and rVes v 5 were on average 2.7 and 2.3 times higher, with the LITE than with the CAP system. The combination of rApi m 1 and rApi m 2 (LITE) and the combination of rVes v 5 (LITE) and rVes v 1 (CAP) almost matched the sensitivity of native venoms (95% and 97%, respectively), whereas the diagnostic sensitivity of the combination of rVes v 5 and rVes v 1 (CAP) did not reach the sensitivity of rVes v 5 (LITE) alone (90% vs. 93%). IgE levels to venom recombinants and total IgE did not correlate with the severity of sting reaction. The use of rApi m 1 and rVes v 5 with the LITE system significantly enhanced diagnostic utility of venom recombinants and should improve the dissection of bee and yellow jacket venom allergy. © 2015 John Wiley & Sons Ltd.
Code of Federal Regulations, 2014 CFR
2014-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Code of Federal Regulations, 2012 CFR
2012-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Code of Federal Regulations, 2013 CFR
2013-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Code of Federal Regulations, 2011 CFR
2011-10-01
... specified: (1) For tanks built to API Specification 12F, API Standard 620, and others (such as API Standard... accordance with section 4.3.2.3.1. (2) For tanks built to API 2510, the installation of impoundment must be in accordance with section 5 or 11 of API 2510 (incorporated by reference, see § 195.3). (c...
Development of Co-based bulk metallic glasses as potential biomaterials.
Zhou, Zeyan; Wei, Qin; Li, Qiang; Jiang, Bingliang; Chen, You; Sun, Yanfei
2016-12-01
A new series of Co80-x-yCrxMoyP14B6 (x=5 y=5; x=5 y=10; x=10 y=10, all values in at.%) bulk metallic glasses (BMGs) with a maximum diameter of 1.5mm has been developed for using them as potential bio-implant materials by a combination of fluxing treatment and J-quenching technique. The performance of the present Co-based BMGs in biomedical implant applications was investigated as compared to the CoCrMo biomedical alloy (ASTM F75) and 316L stainless steel (316L SS). The corrosion behavior of the samples was investigated in both Hank's solution (pH=7.4) and artificial saliva solution (pH=6.3) at 37°C employing electrochemical measurements. The results indicate that the Co-based BMGs exhibit much higher corrosion resistance in the simulated body solutions than that of 316L SS. Compared with the corrosion resistance of ASTM F75, that of Co70Cr5Mo5P14B6 and Co65Cr5Mo10P14B6 BMGs is found to be lower and that of Co60Cr10Mo10P14B6 BMG is higher. The concentrations of Co, Cr, and Mo ions released into the simulated body solutions from our Co-based BMGs after potentiodynamic polarization are significantly lower than that released from ASTM F75. The biocompatibility of the specimens was evaluated using an in vitro test of NIH3T3 cell culture in the specimen extraction media for 1, 3, 5, and 7days, revealing the non-cytotoxicity of the Co-based BMGs towards NIH3T3 cells. Moreover, examinations on the cell adhesion and growth on the surface of the specimens indicate that the Co-based BMGs exhibit better cell viability compared to ASTM F75 and 316L SS biomedical alloys. Copyright © 2016 Elsevier B.V. All rights reserved.
Motion Adaptation, its Role in Motion Detection Under Natural Image Conditions and Target Detection
2005-06-02
Ibbotson, M.R. & Goodman, L.J. (1990) “Response characteristics of four wide-field motion sensitive descending interneurons in Apis mellifera ,” J. Exp...libraries (in particular a module, PyGame, original designed as an API for computer games applications). Andrew’s contribution to this effort was a
USDA-ARS?s Scientific Manuscript database
Numerous viruses have been detected in honeybees, which can be roughly divided into 14 unique and distinct species-complexes, each with one or more strains or sub-species. Here we present the initial characterization of an entirely new virus species-complex discovered in honeybee (Apis mellifera L.)...
Responses of Varroa-resistant honey bees (Apis mellifera L.) to Deformed Wing Virus
USDA-ARS?s Scientific Manuscript database
The impact of Deformed wing virus (DWV) on Apis mellifera is magnified by Varroa destructor parasitism. This study compared the responses of two Varroa-resistant honey bee stocks [Russian honey bees (RHB) and an outcross of Varroa Sensitive Hygienic bees (POL)] to DWV infection to that of Italian ho...
Pipeline welding goes mechanized
DOE Office of Scientific and Technical Information (OSTI.GOV)
Beeson, R.
1999-11-01
Spread four has bugs in the cornfield--but not to worry. The bug referred to here is a mechanized welding bug, specifically a single welding head, computer-aided gas metal arc (GMAW) system from CRC-Evans Automatic Welding powered by a Miller Electric XMT{reg{underscore}sign} 304 inverter-based welding machine. The bug operator and owner of 32 inverters is Welded Construction, L.P., of Perrysburgh, Ohio. Spread four is a 147-mile stretch of the Alliance Pipeline system (Alliance) cutting through the cornfields of northeast Iowa. While used successfully in Canada and Europe for onshore and offshore pipeline construction for 30 years, this is the first large-scalemore » use of mechanized welding in the US on a cross-country pipeline. On longer, larger-diameter and thicker-wall pipe projects--the Alliance mainline has 1,844 miles of pipe, most of it 36-in. diameter with a 0.622-in. wall thickness--mechanized GMAW offers better productivity than manual shielded metal arc welding (SMAW). In addition, high-strength steels, such as the API 5L Grade X70 pipe used on the Alliance, benefit from the low-hydrogen content of certain solid and tubular wire electrodes.« less
NASA Astrophysics Data System (ADS)
Yusoff, Nik Yusliyana Nik; Mohamad, Suharni; Abdullah, Haswati@Nurhayati; Rahman, Nurhayu Ab
2016-12-01
Malaysian honey and propolis extracts were investigated for their antifungal properties against pathogens implicated in denture stomatitis. Each of the honey and aqueous extracts propolis at net preparation, 1:1 and 1:2 dilutions was evaluated by using agar well diffusion assay and further investigated by minimum inhibitory concentration (MIC) within the range of 500 mg/mL to 62.5 mg/mL against oral fungi. The findings indicated that there was no effect of propolis on Candida spp for both types of propolis based on no inhibition zones was recorded. Meanwhile, for antifungal activity of honey, only honey from Trigona spp has shown activity at net preparation against C. albicans (10.47 ± 0.23 mm), C. tropicalis (12.29 ± 0.23 mm) and C. glabrata (8.69 ± 0.53 mm). For minimum inhibitory concentration, the data indicates that both propolis have shown inhibitory effect at 500 mg/mL. As for honey, Trigona spp was the effective honey that give MIC value at 250 mg/mL against Candida spp. Apis dorsata honey has shown MIC value at 500 mg/mL while Apis mellifera honey had inhibited C.albicans and C.glabrata at 500 mg/mL except for C.tropicalis at 250 mg/mL. It can be concluded that both propolis has shown weaker antifungal activity against oral fungi while only honey produced from Trigona spp had strong antifungal activity compare to other honey against oral fungi implicated in denture stomatitis.
den Brok, Monique W J; Nuijen, Bastiaan; Hillebrand, Michel J X; Grieshaber, Charles K; Harvey, Michael D; Beijnen, Jos H
2005-09-01
C1311 (5-[[2-(diethylamino)ethyl]amino]-8-hydroxyimidazo [4,5,1-de]-acridin-6-one-dihydrochloride trihydrate) is the lead compound from the group of imidazoacridinones, a novel group of rationally designed anticancer agents. The pharmaceutical development of C1311 necessitated the availability of an assay for the quantification and purity determination of C1311 active pharmaceutical ingredient (API) and its pharmaceutical dosage form. A reversed-phase liquid chromatographic method (RP-LC) with ultraviolet (UV) detection was developed, consisting of separation on a C18 column with phosphate buffer (60 mM; pH 3 with 1 M citric acid)-acetonitrile-triethylamine (83:17:0.05, v/v/v) as the mobile phase and UV-detection at 280 nm. The method was found to be linear over a concentration range of 2.50-100 microg/mL, precise and accurate. Accelerated stress testing showed degradation products, which were well separated from the parent compound, confirming its stability-indicating capacity. Moreover, the use of LC-MS and on-line photo diode array detection enabled us to propose structures for four degradation products. Two of these products were also found as impurities in the API and more abundantly in an impure lot of API.
Completion of Embankment, Spillway and Outlet Works
1990-08-01
Protection Against Slides and Rockfalls 42 5 PILE DRIVING AND SPECIAL FOUNDATIONS 42 6 TUNNELS, SHAFTS, AND UNDERGROUND STRUCTURES 42 7 FOUNDATION ANCHOR TEST...TW r tyVs.. l ti rs 80 .S0.90 R 4oeS . 14.0-..19.01 Noe 2ale 3" 0 34. lattafro14 600.0j 33.0’ S. 38.0-.39.01 631.0 for gi . x 0% WI APnbdcE
Analysis of molecular interactions in solid dosage forms; challenge to molecular pharmaceutics.
Yamamoto, Keiji; Limwikrant, Waree; Moribe, Kunikazu
2011-01-01
The molecular states of active pharmaceutical ingredients (APIs) in pharmaceutical dosage forms strongly affect the properties and quality of a drug. Various important fundamental physicochemical studies were reviewed from the standpoint of molecular pharmaceutics. Mechanochemical effects were evaluated in mixtures of APIs and pharmaceutical additives. Amorphization, complex formation and nanoparticle formation are observed after grinding process depending on the combination of APIs and pharmaceutical additives. Sealed-heating method and mesoporous materials have been used to investigate drug molecular interactions in dosage forms. Molecular states have been investigated using powder X-ray diffraction, thermal analysis, IR, solid state fluorometry, and NMR. © 2011 Pharmaceutical Society of Japan
Supporting palladium metal on gold nanoparticles improves its catalysis for nitrite reduction
NASA Astrophysics Data System (ADS)
Qian, Huifeng; Zhao, Zhun; Velazquez, Juan C.; Pretzer, Lori A.; Heck, Kimberly N.; Wong, Michael S.
2013-12-01
Nitrate (NO3-) and nitrite (NO2-) anions are often found in groundwater and surface water as contaminants globally, especially in agricultural areas due to nitrate-rich fertilizer use. One popular approach to studying the removal of nitrite/nitrate from water has been their degradation to dinitrogen via Pd-based reduction catalysis. However, little progress has been made towards understanding how the catalyst structure can improve activity. Focusing on the catalytic reduction of nitrite in this study, we report that Au NPs supporting Pd metal ("Pd-on-Au NPs") show catalytic activity that varies with volcano-shape dependence on Pd surface coverage. At room temperature, in CO2-buffered water, and under H2 headspace, the NPs were maximally active at a Pd surface coverage of 80%, with a first-order rate constant (kcat = 576 L gPd-1 min-1) that was 15x and 7.5x higher than monometallic Pd NPs (~4 nm; 40 L gPd-1 min-1) and Pd/Al2O3 (1 wt% Pd; 76 L gPd-1 min-1), respectively. Accounting only for surface Pd atoms, these NPs (576 L gsurface-Pd-1 min-1) were 3.6x and 1.6x higher than monometallic Pd NPs (160 L gsurface-Pd-1 min-1) and Pd/Al2O3 (361 L gsurface-Pd-1 min-1). These NPs retained ~98% of catalytic activity at a chloride concentration of 1 mM, whereas Pd/Al2O3 lost ~50%. The Pd-on-Au nanostructure is a promising approach to improve the catalytic reduction process for nitrite and, with further development, also for nitrate anions.Nitrate (NO3-) and nitrite (NO2-) anions are often found in groundwater and surface water as contaminants globally, especially in agricultural areas due to nitrate-rich fertilizer use. One popular approach to studying the removal of nitrite/nitrate from water has been their degradation to dinitrogen via Pd-based reduction catalysis. However, little progress has been made towards understanding how the catalyst structure can improve activity. Focusing on the catalytic reduction of nitrite in this study, we report that Au NPs supporting Pd metal ("Pd-on-Au NPs") show catalytic activity that varies with volcano-shape dependence on Pd surface coverage. At room temperature, in CO2-buffered water, and under H2 headspace, the NPs were maximally active at a Pd surface coverage of 80%, with a first-order rate constant (kcat = 576 L gPd-1 min-1) that was 15x and 7.5x higher than monometallic Pd NPs (~4 nm; 40 L gPd-1 min-1) and Pd/Al2O3 (1 wt% Pd; 76 L gPd-1 min-1), respectively. Accounting only for surface Pd atoms, these NPs (576 L gsurface-Pd-1 min-1) were 3.6x and 1.6x higher than monometallic Pd NPs (160 L gsurface-Pd-1 min-1) and Pd/Al2O3 (361 L gsurface-Pd-1 min-1). These NPs retained ~98% of catalytic activity at a chloride concentration of 1 mM, whereas Pd/Al2O3 lost ~50%. The Pd-on-Au nanostructure is a promising approach to improve the catalytic reduction process for nitrite and, with further development, also for nitrate anions. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr04540d
Quality investigation of hydroxyprogesterone caproate active pharmaceutical ingredient and injection
Chollet, John L.; Jozwiakowski, Michael J.
2012-01-01
The purpose of this study was to investigate the quality of hydroxyprogesterone caproate (HPC) active pharmaceutical ingredient (API) sources that may be used by compounding pharmacies, compared to the FDA-approved source of the API; and to investigate the quality of HPC injection samples obtained from compounding pharmacies in the US, compared to the FDA-approved product (Makena®). Samples of API were obtained from every source confirmed to be an original manufacturer of the drug for human use, which were all companies in China that were not registered with FDA. Eight of the ten API samples (80%) did not meet the impurity specifications required by FDA for the API used in the approved product. One API sample was found to not be HPC at all; additional laboratory testing showed that it was glucose. Thirty samples of HPC injection obtained from com pounding pharmacies throughout the US were also tested, and eight of these samples (27%) failed to meet the potency requirement listed in the USP monograph for HPC injection and/or the HPLC assay. Sixteen of the thirty injection samples (53%) exceeded the impurity limit setforthe FDA-approved drug product. These results confirm the inconsistency of compounded HPC Injections and suggest that the risk-benefit ratio of using an unapproved compounded preparation, when an FDA-approved drug product is available, is not favorable. PMID:22329865
Welding Thermal Simulation and Corrosion Study of X-70 Deep Sea Pipeline Steel
NASA Astrophysics Data System (ADS)
Zhang, Weipeng; Li, Zhuoran; Gao, Jixiang; Peng, Zhengwu
2017-12-01
Gleeble thermomechanical processing machine was used to simulate coarse grain heat affected zone (CGHAZ) of API X-70 thick wall pipeline steel used in deep sea. Microstructures and corresponding corrosion behavior of the simulated CGHAZs using different cooling rate were investigated and compared to the as-received material by scanning electron microscope and electrochemical experiments carried out in 3.5 wt. % NaCl solution. Results of this study show that the as-received samples exhibited a little bit higher corrosion resistance than the simulated CGHAZs. Among 3 sets of simulation experiments, the maximum corrosion tendency was exhibited at the t8/5 = 20 s with the most martensite-austensite (M-A) microstructure and highest corrosion potential was shown at the t8/5 = 60 s.
Kuki, S; Taniguchi, K; Masai, T; Yoshida, K; Yamamoto, K; Matsuda, H
2001-01-01
The most important limitation in the use of an intra-aortic balloon pumping (IABP) is the risk of vascular complications. Recently, an IABP catheter with an 8.0 French shaft and low profile that may decrease the risk of vascular morbidity has been developed. We evaluated the in vitro balloon performance and the prevention of limb ischemia in clinical use. An 8.0 French IABP catheter was compared with a standard 9.5 French catheter. Inflation time (IT), deflation time (DT), and changes in volume (V) generated by the balloon were measured during the pumping cycle in an experimental model. The inflation velocity (V/IT) and deflation velocity (V/DT) were calculated as parameters of balloon performance. At 120 bpm the V/IT and V/DT were 0.34 ml/msec and 0.28 ml/msec with the 8.0 French, and 0.33 ml/msec and 0.24 ml/msec with the 9.5 French catheter. Twelve patients with coronary artery disease, ranging in age from 41 to 87 years (mean, 66 years), who underwent IABP support, were divided into group 1 (8.0 French, n = 4) and group 2 (9.5 French, n = 8). Ankle-arm pressure index (API), lactate extraction ratio (LER) in the limb with IABP insertion, and cardiac index (CI) were measured at 1, 12, and 24 hours postoperatively. There were no major vascular complications and no counterpulsation related morbidity. There was no significant difference between the two groups with regard to age, duration of IABP support, and incidence of peripheral vascular disease and diabetes. The percentage of women patients was significantly higher in group 1 (100% vs. 25%), whereas body surface area was significantly smaller (1.45 +/- 0.14 vs. 1.68 +/- 0.12 m2). The API in group 1 were slightly higher than those in group 2 throughout the observed period (not significant). The LER and Cl showed no significant differences between the two groups. These results suggest that the 8.0 French IABP catheter with a low profile has an acceptable in vitro performance, and its clinical application may be effective in preventing limb ischemia in a high-risk subset of patients such as women and smaller patients.
Hsu, Jack W.; Wingard, John R.; Logan, Brent R.; Chitphakdithai, Pintip; Akpek, Gorgun; Anderlini, Paolo; Artz, Andrew S.; Bredeson, Chris; Goldstein, Steven; Hale, Gregory; Hematti, Pieman; Joshi, Sarita; Kamble, Rammurti T.; Lazarus, Hillard M.; O'Donnell, Paul V.; Pulsipher, Michael A.; Savani, Bipin; Schears, Raquel M.; Shaw, Bronwen E.; Confer, Dennis L.
2014-01-01
Little information exists on the effect of race and ethnicity on collection of peripheral blood stem cells (PBSC) for allogeneic transplantation. We studied 10776 donors from the National Marrow Donor Program who underwent PBSC collection from 2006-2012. Self-reported donor race/ethnic information included Caucasian, Hispanic, Black/African American (AA), Asian/Pacific Islander (API), and Native American (NA). All donors were mobilized with subcutaneous filgrastim (G-CSF) at an approximate dose of 10 µg/kg/d for 5 days. Overall, AA donors had the highest median yields of mononuclear cells (MNC)/L and CD34+ cells/L blood processed (3.1 × 109 and 44 × 106 respectively) while Caucasians had the lowest median yields at 2.8 × 109 and 33.7 × 106 respectively. Multivariate analysis of CD34+/L mobilization yields using Caucasians as the comparator and controlling for age, gender, body mass index, and year of apheresis revealed increased yields in overweight and obese AA and API donors. In Hispanic donors, only male obese donors had higher CD34+/L mobilization yields compared to Caucasian donors. No differences in CD34+/L yields were seen between Caucasian and NA donors. Characterization of these differences may allow optimization of mobilization regimens to allow enhancement of mobilization yields without compromising donor safety. PMID:25316111
USDA-ARS?s Scientific Manuscript database
Although Varroa destructor is the most serious ecto-parasite to the honeybee, Apis mellifera L., some honeybee populations such as Apis mellifera scutellata in Kenya can survive mite infestations without treatment. Previously, we reported that grooming behavior could be a potential tolerant mechanis...
NASA Astrophysics Data System (ADS)
László, Márton
2010-05-01
Widely well know that the potato is an important vegetable crop at Brazíl. Plant grown on about 173.000 ha, with total yield of 2.6 million tons year-1. The average yield is about 15 t ha-1. This level is very low because degeneration of crop is rapid under high temperature and high viruses pressure. Therefore seed potato propagation and production is principal on consumption potato production. This is why we found it necessary to develop it. The latossolo vermelho soil-farmyard manure- burnt rice straw-fertilizer 4N:14P:8K greenhouse pot trial was set up at the National Vegetable Crops Research Center, Brasília-DF, Brazíl in 1990. The methods of the experiments were soil x farmyard manure x burnt rice straw, soil x 4N:14P:8K fertilizer and soil x farmyard manure x burnt rice straw x 4N:14P:8K fertilizer on randomized block design in total 29 combination of treatments in 5, 5 and 3 repetitions with in a total parcel of 116. According to chemical analysis of the a., soil, b., farmyard manure and c., burnt rice straw the agrochemistry parameters were as follows: a., latossolo vermelho soil: CaCO3 0.3-0.7%, humo 0.9-1.0%, pH (H2O) 5.3, pH (KCl) 4.5, AL- P2O5 3.2-3.5 mg kg-1, AL- K2O 180 mg kg-1, Mg (KCl) 70 mg kg-1, EDTA-Zn 0.5-0.8 mg kg-1, EDTA-Cu 0.5-0.6 mg kg-1, b., farmyard manure: N 1.8 g kg-1, P2O5 2.0 g kg-1, K2O 4.0 g kg-1, c., burnt rice straw: N 0.8 g kg-1, P2O5 7.0 g kg-1, K2O 4.5 g kg-1. The experimental datas were estimated by analysis of variance, ANOVA and MANOVA. The main conclusions were as follows: 1. Mixture of 80% latossolo vermelho, 10% burnt rice straw and 10% farmyard manure were shown best performance on seed potato productivity. The piece of tubers with a 0-20 mm (consumption seeds) was increased by 77%. 2. Total seed potato number was reached maximum at 10.8 g pot-1 4N:14P:8K fertilizer regarding to average of treatments with a 33%. 3. Dry biomassa production plant-1 was decreased by high dose of 4N:14P:8K fertilizer (18.0 g pot-1) with a hard effect (57%). Our results are shown that it was possible developing of the seed potato production under tropical greenhouse conditions by optimalised soil-organic matter-fertilizer system. This datas should be as indicators to sustainable field potato advisory systems. Keywords: potato (Solanum tuberosum L.), greenhouse, latossolo vermelho soil, farmyard manure, burnt rice straw, 4N:14P:8K fertilizer, sustainability, yield RESUMO A batata é atualmente uma das hortaliças de maior importância no Brasíl. Nos conduzirémos os três experimentos para aumentár-se do produção e produtividade da batata (Solanum tuberosum L.) semente pré- básica no casa de vegetação da Brazília-DF, no Empresa Brasileira de Pesquisa Agropecuaria- Centro Nacional de Pesquisas de Hortaliças no 1990. Os três experimentos (latossolo vermelho novo x esterco de curral x palha de arroz queimado, latossolo vermelho novo x adubo 4:14:8 NPK, latossolo vermelho novo x esterco de curral x palha de arroz queimado x adubo 4:14:8 NPK) no casa de vegetação foram conduzidos com total 29 combinações, no 5-5-3 repetições com total parcelas de 116. Os resultados foram submetidos a analise de variáncia, ANOVA e MANOVA. Nossos principal resultados estam apresentándo abaixo. 1. A mistura de 80% latossolo vermelho novo, 10% palha de arroz queimado e 10% de esterco de curral, apresentou os maiores valores para numero de tuberculos com 0-20 mm, peso total de tuberculos com 0-20 mm e peso total de tuberculos por vaso. 2. Há um efeito grande crescente das doses de 4N:14P:8K nos caracteres observados. 3. Analise-se do latossolo vermelho novo x esterco de curral x palha de arroz queimado x adubo 4:14:8 NPK experimento os resultados apresentárám-se que entre nas misturas também foi melhor a 80% latossolo vermelho novo, 10% palha de arroz queimado, 10% esterco de curral. Examinando-se 15 fatores, entre 11 casos afirmou-se a mistura como para melhor que a outra mistura. Nossos resultados apresentam- se que possivel aumentar em grande volumens o produção da batata semente pré- básica com a optimalisou solo-materia orgnicânico-adubo sistema. Estes informações oferecendo-se aplicar no sustentar-se extenção rural para aumentár o produção e produtividade da bata semente e consumo. Chave palavras: batata (Solanum tuberosum L.), casa de vegetação, latossolo vermelho novo, esterco de curral, palha de arroz queimado, adubo de 4:14:8 NPK, sustentação, produção
Moniruzzaman, Mohammed; Khalil, Md Ibrahim; Sulaiman, Siti Amrah; Gan, Siew Hua
2013-02-23
The aim of the present study was to evaluate the physicochemical and antioxidant properties of Malaysian monofloral honey samples-acacia, pineapple and borneo honey-and compare them with tualang honey. Acacia and pineapple honey are produced by Apis mellifera bees while borneo and tualang honey are produced by Apis cerana and Apis dorsata bees, respectively. The physical parameters of honey, such as pH, moisture content, electrical conductivity (EC), total dissolved solids (TDS), color intensity, total sugar and apparent sucrose content, were measured. Hydroxymethylfurfural (HMF) was measured using high performance liquid chromatography, and a number of biochemical and antioxidant tests were performed to determine the antioxidant properties of the honey samples. Acacia honey was the most acidic (pH 3.53), whereas pineapple honey had the lowest moisture content (14.86%), indicating that both types of honey can resist microbial spoilage more effectively when compared to tualang honey (pH 3.80 and 17.53% moisture content). Acacia honey contained the highest EC (0.76 mS/cm), whereas borneo honey had the highest (377 ppm) TDS. The mean HMF content in Malaysian honey was 35.98 mg/kg. Tualang honey, which is amber color, had the highest color intensity (544.33 mAU). Acacia honey is the sweetest, and contained the highest concentration of total sugar, reducing sugar and apparent sucrose. Tualang honey had the highest concentration of phenolic compounds (352.73 ± 0.81 mg galic acid/kg), flavonoids (65.65 ± 0.74 mg catechin/kg), DPPH (59.89%), FRAP values (576.91 ± 0.64 μM Fe (II)/100 g) and protein content (4.83 ± 0.02 g/kg) as well as the lowest AEAC values (244.10 ± 5.24 mg/kg), indicating its strong antioxidant properties. Proline, an important amino acid that is present in honey was also measured in the present study and it was found at the highest concentration in pineapple honey. Several strong correlations were found among the biochemical and antioxidant parameters of all the Malaysian honeys. Although Malaysian honeys are of good quality, tualang honey contains the strongest antioxidant properties by far.
Operator Influence of Unexploded Ordnance Sensor Technologies
2007-03-01
chart display ActiveX control Mscomct2.dll – date/time display ActiveX control Pnpscr.dll – Systran SCRAMNet replicated shared memory device...response value database rgm_p2.dll – Phase 2 shared memory API and implementation Commercial components StripM.ocx – strip chart display ActiveX
Developing of Library for Proofs of Data Possession in Charm
2013-06-01
INTENTIONALLY LEFT BLANK x LIST OF ACRONYMS AND ABBREVIATIONS API Application Programmer Interface DTP Datatype -preserving Encryption FedRAMP U.S...proposed block-cipher mode for Datatype -Preserving Encryption (DTP) uses the Knuth Shuffle in one of its steps [19]. It may be advantageous to...http://www.clustal.org/omega/clustalo-api/util_8c.html. [19] U. T. Mattsson, “Format-controlling encryption using datatype -preserving encryption
Cassidy, A M C; Gardner, C E; Jones, W
2009-09-08
Active pharmaceutical ingredient (API) stability in solid state tablet formulation is frequently a function of the relative humidity (RH) environment in which the drug is stored. Caffeine is one such problematic API. Previously reported caffeine cocrystals, however, were found to offer increased resistance to caffeine hydrate formation. Here we report on the use of atomic force microscopy (AFM) to image the surface of two caffeine cocrystal systems to look for differences between the surface and bulk response of the cocrystal to storage in controlled humidity environments. Bulk responses have previously been assessed by powder X-ray diffraction. With AFM, pinning sites were identified at step edges on caffeine/oxalic acid, with these sites leading to non-uniform step movement on going from ambient to 0% RH. At RH >75%, areas of fresh crystal growth were seen on the cocrystal surface. In the case of caffeine/malonic acid the cocrystals were observed to absorb water anisotropically after storage at 75% RH for 2 days, affecting the surface topography of the cocrystal. These results show that AFM expands on the data gathered by bulk analytical techniques, such as powder X-ray diffraction, by providing localised surface information. This surface information may be important for better predicting API stability in isolation and at a solid state API-excipient interface.
12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation
Code of Federal Regulations, 2010 CFR
2010-01-01
... following simple formula: APY=100 (Interest/Principal) Examples (1) If an institution pays $61.68 in... percentage yield is 5.39%, using the simple formula: APY=100(134.75/2,500) APY=5.39% For $15,000, interest is... Yield Calculation The annual percentage yield measures the total amount of interest paid on an account...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-23
... American Society for Testing and Materials (ASTM) A- 53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A- 795, and the American Petroleum Institute (API) 5L specifications and meeting the... to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM A- 106...
75 FR 78339 - Buy America Waiver Notification
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-15
... of steel pipe API 5L, Grade B, PSL 2 as an alternate equivalent product to steel pipe A53 Grade B, 26... Buy America waiver for the use of non-domestic steel pipe; A53 Grade B, 26'' OD, 0.375'' wall for the... Register on October 19, 2010, at 75 FR 64394, for the use of non-domestic steel pipe; A53 Grade B, 26'' OD...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-21
... Republic of Korea, Mexico, and Venezuela, 61 FR 11608 (March 21, 1996), pipe certified to the API 5L line... Antidumping Duties, 68 FR 23954 (May 6, 2003) (``Assessment Policy Notice''). This clarification will apply to... there is no rate for the intermediary involved in the transaction. See Assessment Policy Notice for a...
Mayank, A K; Sharma, S; Nailwal, H; Lal, S K
2015-12-17
Apoptosis of host cells profoundly influences virus propagation and dissemination, events that are integral to influenza A virus (IAV) pathogenesis. The trigger for activation of apoptosis is regulated by an intricate interplay between cellular and viral proteins, with a strong bearing on IAV replication. Though the knowledge of viral proteins and mechanisms employed by IAV to induce apoptosis has advanced considerably of late, we know relatively little about the repertoire of host factors targeted by viral proteins. Thus, identification of cellular proteins that are hijacked by the virus will help us not only to understand the molecular underpinnings of IAV-induced apoptosis, but also to design future antiviral therapies. Here we show that the nucleoprotein (NP) of IAV directly interacts with and suppresses the expression of API5, a host antiapoptotic protein that antagonizes E2F1-dependent apoptosis. siRNA-mediated depletion of API5, in NP-overexpressed as well as IAV-infected cells, leads to upregulation of apoptotic protease activating factor 1 (APAF1), a downstream modulator of E2F1-mediated apoptosis, and cleavage of caspases 9 and 3, although a reciprocal pattern of these events was observed on ectopic overexpression of API5. In concordance with these observations, annexin V and 7AAD staining assays exhibit downregulation of early and late apoptosis in IAV-infected or NP-transfected cells on overexpression of API5. Most significantly, while overexpression of API5 decreases viral titers, cellular NP protein as well as mRNA levels in IAV-infected A549 cells, silencing of API5 expression causes a steep rise in the same parameters. From the data reported in this manuscript, we propose a proapoptotic role for NP in IAV pathogenesis, whereby it suppresses expression of antiapoptotic factor API5, thus potentiating the E2F1-dependent apoptotic pathway and ensuring viral replication.
Lactobacillus panisapium sp. nov., from honeybee Apis cerana bee bread.
Wang, Cong; Huang, Yan; Li, Li; Guo, Jun; Wu, Zhengyun; Deng, Yu; Dai, Lirong; Ma, Shichun
2018-03-01
A novel facultatively anaerobic, Gram-stain-positive, non-motile, non-spore-forming, catalase-negative bacterium of the genus Lactobacillus, designated strain Bb 2-3 T , was isolated from bee bread of Apis cerana collected from a hive in Kunming, China. The strain was regular rod-shaped. Optimal growth occurred at 37 °C, pH 6.5 with 5.0 g l -1 NaCl. The predominant fatty acids were C18 : 1ω9c, C16 : 0 and C19 : 0 iso. Respiratory quinones were not detected. Seven glycolipids, three lipids, phosphatidylglycerol and diphosphatidylglycerol were detected. The peptidoglycan type A4α l-Lys-d-Asp was determined. Strain Bb 2-3 T was closely related to Lactobacillus bombicola DSM 28793 T , Lactobacillus apis LMG 26964 T and Lactobacillus helsingborgensis DSM 26265 T , with 97.8, 97.6 and 97.0 % 16S rRNA gene sequence similarity, respectively. A comparison of two housekeeping genes, rpoA and pheS, revealed that strain Bb 2-3 T was well separated from the reference strains of species of the genus Lactobacillus. The average nucleotide identity between strain Bb 2-3 T and the type strains of closely related species was lower than the 95-96 % threshold value for delineation of genomic prokaryotic species. The G+C content of the genomic DNA of strain Bb 2-3 T was 37.4 mol%. On the basis of phenotypic, chemotaxonomic and phylogenetic analyses, strain Bb 2-3 T is proposed to represent a novel species of the genus Lactobacillus, for which we propose the name Lactobacillus panisapium sp. nov. The type strain is Bb 2-3 T (=DSM 102188 T =ACCC 19955 T ).
Effects of caffeine on prolonged intermittent-sprint ability in team-sport athletes.
Schneiker, Knut Thomas; Bishop, David; Dawson, Brian; Hackett, Laurence Peter
2006-03-01
Caffeine can be a powerful ergogenic aid for the performance of prolonged, submaximal exercise. Little evidence, however, supports an ergogenic effect of caffeine on intermittent-sprint performance. Hence, this study was conducted to examine the effects of acute caffeine ingestion on prolonged intermittent-sprint performance. Using a double-blind, placebo-controlled design, 10 male team-sport athletes (amateur level, VO2peak 56.5 +/- 8.0 mL x kg(-1) x min(-1)) completed two exercise trials, separated by 7 d, 60 min after ingestion of either 6 mg x kg(-1) caffeine or placebo. The exercise trial was performed on a front-access cycle ergometer and consisted of 2 x 36-min halves, each composed of 18 x 4-s sprints with 2-min active recovery at 35% VO2peak between each sprint. Urinary caffeine levels were measured after exercise. The total amount of sprint work performed during the caffeine trial was 8.5% greater than that performed during the placebo trial in the first half (75,165.4 +/- 3,902.9 vs 69,265.6 +/- 3,719.7 J, P < 0.05), and was 7.6% greater in the second half (73,978.7 +/- 4,092.6 vs 68,783.2 +/- 3,574.4 J, P < 0.05). Similarly, the mean peak power score achieved during sprints in the caffeine trial was 7.0% greater than that achieved during the placebo trial in the first half (1330.9 +/- 68.2 vs 1244.2 +/- 60.7 W, P < 0.05), and was 6.6% greater in the second half (1314.5 +/- 68.4 vs 1233.2 +/- 59.9 W, P < 0.05). Urinary caffeine levels following the caffeine trial ranged from 3.5 to 9.1 microg x mL(-1) (6.9 +/- 0.6 microg x mL(-1)). This study revealed that acute caffeine ingestion can significantly enhance performance of prolonged, intermittent-sprint ability in competitive, male, team-sport athletes.
Thriveni, T; Rajesh Kumar, J; Sujatha, D; Sreedhar, N Y
2007-05-01
The cyclic voltammograms of terbacil and lenacil at the hanging mercury drop electrode showed a single well defined four electron irreversible peak in universal buffer of pH 4.0 for both compounds. The peak potentials were shifted to more negative values on the increase of pH of the medium, implying the involvement of protons in the electrode reaction and that the proton transfer reaction precedes the proper electrode process. The four electron single peak may be attributed to the simultaneous reduction of carbonyl groups present in 2 and 4 in pyrimidine ring of terbacil and lenacil to the corresponding hydroxy derivative. Based on the interfacial adsorptive character of the terbacil and lenacil onto the mercury electrode surface, a simple sensitive and low cost differential pulse adsorptive stripping voltammetric procedure was optimized for the analysis of terbacil and lenacil. The optimal operational conditions of the proposed procedure were accumulation potential E (acc) = -0.4 V, accumulation time t (acc) = 80 s, scan rate = 40 mV s(-1), pulse amplitude = 25 mV using a universal buffer pH 4.0 as a supporting electrolyte. The linear concentration range was found to be 1.5 x 10(-5) to 1.2 x 10(-9) mol/l and 1.5 x 10(-5) to 2.5 x 10(-8) mol/l with the lower detection limit of 1.22 x 10(-9) and 2.0 x 10(-8) mol/l. The correlation coefficient and relative standard deviation values are found to be 0.942, 0.996, 1.64% and 1.23%, respectively, for 10 replicants. The procedure was successfully applied for determination of terbacil and lenacil in formulations, mixed formulations, environmental samples such as fruit samples and spiked water samples.
3,4-Diaminotoluene sensor development based on hydrothermally prepared MnCoxOy nanoparticles.
Rahman, Mohammed M; Alam, M M; Asiri, Abdullah M; Islam, M A
2018-01-01
A facile hydrothermal process was used to prepare MnCo x O y nanoparticles (NPs) in alkaline medium (pH~10.5) at room temperature. The NPs were characterized by Fourier-transform infrared spectroscopy (FTIR), ultraviolet visible spectroscopy (UV/vis), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), and powder X-ray diffraction (XRD). A thin layer of NPs film as a chemical sensor was fabricated on a glassy carbon electrode (GCE) with the help of a conducting binder. The sensor was implemented successfully for the detection 3,4-DAT with reliable I-V approach at low potential. The sensor-features include good sensitivity (0.37 mAµmolL -1 cm -2 ), low detection limit (LOD=0.26±0.01 pmolL -1 at a signal to noise ratio of 3), low limit of quantification (LOQ=7.80±0.01 pmolL -1 ), good reliability, good reproducibility, ease of integration, and long-term stability were investigated. The sensor response towards 3,4-DAT is linear in logarithmic scale over a large concentration range (1.0 pmolL -1 to 1.0 µmolL -1 ). This work is introduced a route for future sensitive sensor development based on MnCo x O y NPs by reliable I-V method for the detection of hazardous and carcinogenic toxins in environmental and health care fields. Copyright © 2017 Elsevier B.V. All rights reserved.
Yoshida, M; Karasawa, M; Naruse, T; Fukuda, M; Hirashima, K; Oh, H; Ninomiya, H; Abe, T; Saito, K; Shishido, H; Moriyama, Y; Shibata, A; Motoyoshi, K; Nagata, N; Miura, Y
1999-02-01
The clinical effects of concomitant use of granulocyte-colony stimulating factor (G-CSF) on empiric antibiotic therapy in febrile neutropenic patients were evaluated in a randomized fashion. Two hundred and fourteen neutropenic febrile episodes (neutrophil counts < 1.0 x 10(9)/l) were treated with flomoxef sodium and tobramycin with or without G-CSF. The resolution of fever at day 4 (excellent response) or at day 7 (good response) was deemed effective. Among 157 evaluable episodes, the observed excellent responses were 31 (38.8%) and the good responses were 20 (25.0%) in the G-CSF group; those in the control group were 26 (33.8%) and 25 (32.5%), respectively. The overall efficacy rate was 63.8% (51/80) in the G-CSF group and 66.2% (51/77) in the control group (not significant). The initial neutrophil count was 0.186 +/- 0.249 x 10(9)/l in the G-CSF group and 0.235 +/- 0.290 x 10(9)/l in the control group, and rose to 2.889 +/- 4.198 x 10(9)/l and 0.522 +/- 0.844 x 10(9)/l, respectively, at day 7. These results indicate that G-CSF does not affect the rate of response to empiric antibiotic therapy in febrile neutropenic patients, although a significant effect of G-CSF was observed on neutrophil recovery.
Jatulan, Eduardo O; Rabajante, Jomar F; Banaay, Charina Gracia B; Fajardo, Alejandro C; Jose, Editha C
2015-01-01
American foulbrood (AFB) is one of the severe infectious diseases of European honeybees (Apis mellifera L.) and other Apis species. This disease is caused by a gram-positive, spore-forming bacterium Paenibacillus larvae. In this paper, a compartmental (SI framework) model is constructed to represent the spread of AFB within a colony. The model is analyzed to determine the long-term fate of the colony once exposed to AFB spores. It was found out that without effective and efficient treatment, AFB infection eventually leads to colony collapse. Furthermore, infection thresholds were predicted based on the stability of the equilibrium states. The number of infected cell combs is one of the factors that drive disease spread. Our results can be used to forecast the transmission timeline of AFB infection and to evaluate the control strategies for minimizing a possible epidemic.
Expediting Scientific Data Analysis with Reorganization of Data
DOE Office of Scientific and Technical Information (OSTI.GOV)
Byna, Surendra; Wu, Kesheng
2013-08-19
Data producers typically optimize the layout of data files to minimize the write time. In most cases, data analysis tasks read these files in access patterns different from the write patterns causing poor read performance. In this paper, we introduce Scientific Data Services (SDS), a framework for bridging the performance gap between writing and reading scientific data. SDS reorganizes data to match the read patterns of analysis tasks and enables transparent data reads from the reorganized data. We implemented a HDF5 Virtual Object Layer (VOL) plugin to redirect the HDF5 dataset read calls to the reorganized data. To demonstrate themore » effectiveness of SDS, we applied two parallel data organization techniques: a sort-based organization on a plasma physics data and a transpose-based organization on mass spectrometry imaging data. We also extended the HDF5 data access API to allow selection of data based on their values through a query interface, called SDS Query. We evaluated the execution time in accessing various subsets of data through existing HDF5 Read API and SDS Query. We showed that reading the reorganized data using SDS is up to 55X faster than reading the original data.« less
[Study of shear rate in modified airlift nitrifying bioreactor].
Jin, Ren-cun; Zheng, Ping
2006-06-01
The characteristics of shear rate in an airlift nitrifying bioreactor and its influencing factors were studied. The results showed that the shear rate was different in different sections of the bioreactor. With inlet gas flowrate at 430 approximately 2700 L x h(-1), the overall shear rate was (0.702 approximately 3.13) x 10(5) s(-1), shear rate in riser was (1.07 approximately 31.3) x 10(5) s(-1) and in gas-liquid separator was (1.12 approximately 25.0) x 10(5) s(-1), respectively. It indicates that the highest shear rates prevailed in the riser part of bioreactor. The operational variables and the bioreactor configurations exerted a significant influence on the shear level of the bioreactor. When inlet gas flowrate was raised from 1300 to 2700 L x h(-1), shear rate in riser and separator ascended first and then descended subsequently. The diameter of draft tube (d) was negatively correlated with shear rate. When the draft tube with diameter of 5.5 cm was installed, the shear rates in riser, separator and overall shear rate were 85.5%, 82.3% and 80.6%, respectively less as compared with that with diameter of 4.0 cm. The number of static mixers (N) was positively correlated with the shear rate. When d was set at 4.0 cm, with N of 10 and 39, the shear rates in riser were 6.14 and 7.97 times higher respectively, than that of conventional bioreactor. The ratio of maximum local shear rate to overall shear rate was 3.68 approximately 7.66, and the homogeneity of the shear field in airlift bioreactors could be improved if d and N were set at 5.5 cm and 10 approximately 13, respectively.
Petzoldt, Christine; Bley, Oliver; Byard, Stephen J; Andert, Doris; Baumgartner, Bruno; Nagel, Norbert; Tappertzhofen, Christoph; Feth, Martin Philipp
2014-04-01
The so-called pharmaceutical solid chain, which encompasses drug substance micronisation to the final tablet production, at pilot plant scale is presented as a case study for a novel, highly potent, pharmaceutical compound: SAR114137. Various solid-state analytical methods, such as solid-state Nuclear Magnetic Resonance (ssNMR), Differential Scanning Calorimetry (DSC), Dynamic Water Vapour Sorption Gravimetry (DWVSG), hot-stage Raman spectroscopy and X-ray Powder Diffraction (XRPD) were applied and evaluated to characterise and quantify amorphous content during the course of the physical treatment of crystalline active pharmaceutical ingredient (API). DSC was successfully used to monitor the changes in amorphous content during micronisation of the API, as well as during stability studies. (19)F solid-state NMR was found to be the method of choice for the detection and quantification of low levels of amorphous API, even in the final drug product (DP), since compaction during tablet manufacture was identified as a further source for the formation of amorphous API. The application of different jet milling techniques was a critical factor with respect to amorphous content formation. In the present case, the change from spiral jet milling to loop jet milling led to a decrease in amorphous API content from 20-30 w/w% to nearly 0 w/w% respectively. The use of loop jet milling also improved the processability of the API. Stability investigations on both the milled API and the DP showed a marked tendency for recrystallisation of the amorphous API content on exposure to elevated levels of relative humidity. No significant impact of amorphous API on either the chemical stability or the dissolution rate of the API in drug formulation was observed. Therefore, the presence of amorphous content in the oral formulation was of no consequence for the clinical trial phases I and II. Copyright © 2013 Elsevier B.V. All rights reserved.
Design and characterization of an ultraresolution seamlessly tiled display for data visualization
NASA Astrophysics Data System (ADS)
Bordes, Nicole; Bleha, William P.; Pailthorpe, Bernard
2003-09-01
The demand for more pixels in digital displays is beginning to be met as manufacturers increase the native resolution of projector chips. Tiling several projectors still offers one solution to augment the pixel capacity of a display. However problems of color and illumination uniformity across projectors need to be addressed as well as the computer software required to drive such devices. In this paper we present the results obtained on a desktop size tiled projector array of three D-ILA projectors sharing a common illumination source. The composite image on a 3 x 1 array, is 3840 by 1024 pixels with a resolution of about 80 dpi. The system preserves desktop resolution, is compact and can fit in a normal room or laboratory. A fiber optic beam splitting system and a single set of red, green and blue dichroic filters are the key to color and illumination uniformity. The D-ILA chips inside each projector can be adjusted individually to set or change characteristics such as contrast, brightness or gamma curves. The projectors were matched carefully and photometric variations were corrected, leading to a seamless tiled image. Photometric measurements were performed to characterize the display and losses through the optical paths, and are reported here. This system is driven by a small PC computer cluster fitted with graphics cards and is running Linux. The Chromium API can be used for tiling graphics tiles across the display and interfacing to users' software applications. There is potential for scaling the design to accommodate larger arrays, up to 4x5 projectors, increasing display system capacity to 50 Megapixels. Further increases, beyond 100 Megapixels can be anticipated with new generation D-ILA chips capable of projecting QXGA (2k x 1.5k), with ongoing evolution as QUXGA (4k x 2k) becomes available.
The C-Terminal Domain of Cernunnos/XLF Is Dispensable for DNA Repair In Vivo▿ †
Malivert, Laurent; Callebaut, Isabelle; Rivera-Munoz, Paola; Fischer, Alain; Mornon, Jean-Paul; Revy, Patrick; de Villartay, Jean-Pierre
2009-01-01
The core nonhomologous end-joining DNA repair pathway is composed of seven factors: Ku70, Ku80, DNA-PKcs, Artemis, XRCC4 (X4), DNA ligase IV (L4), and Cernunnos/XLF (Cernunnos). Although Cernunnos and X4 are structurally related and participate in the same complex together with L4, they have distinct functions during DNA repair. L4 relies on X4 but not on Cernunnos for its stability, and L4 is required for optimal interaction of Cernunnos with X4. We demonstrate here, using in vitro-generated Cernunnos mutants and a series of functional assays in vivo, that the C-terminal region of Cernunnos is dispensable for its activity during DNA repair. PMID:19103754
Study of exclusive charmless semileptonic B decays and |Vub|.
Adam, N E; Alexander, J P; Berkelman, K; Cassel, D G; Duboscq, J E; Ehrlich, R; Fields, L; Gibbons, L; Gray, R; Gray, S W; Hartill, D L; Heltsley, B K; Hertz, D; Jones, C D; Kandaswamy, J; Kreinick, D L; Kuznetsov, V E; Mahlke-Krüger, H; Meyer, T O; Onyisi, P U E; Patterson, J R; Peterson, D; Pivarski, J; Riley, D; Ryd, A; Sadoff, A J; Schwarthoff, H; Shi, X; Stroiney, S; Sun, W M; Wilksen, T; Weinberger, M; Athar, S B; Patel, R; Potlia, V; Yelton, J; Rubin, P; Cawlfield, C; Eisenstein, B I; Karliner, I; Kim, D; Lowrey, N; Naik, P; Selen, M; White, E J; Wiss, J; Mitchell, R E; Shepherd, M R; Besson, D; Pedlar, T K; Cronin-Hennessy, D; Gao, K Y; Hietala, J; Kubota, Y; Klein, T; Lang, B W; Poling, R; Scott, A W; Smith, A; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Tomaradze, A; Ernst, J; Ecklund, K M; Severini, H; Love, W; Savinov, V; Aquines, O; Li, Z; Lopez, A; Mehrabyan, S; Mendez, H; Ramirez, J; Huang, G S; Miller, D H; Pavlunin, V; Sanghi, B; Shipsey, I P J; Xin, B; Adams, G S; Anderson, M; Cummings, J P; Danko, I; Hu, D; Moziak, B; Napolitano, J; He, Q; Insler, J; Muramatsu, H; Park, C S; Thorndike, E H; Yang, F; Coan, T E; Gao, Y S; Artuso, M; Blusk, S; Butt, J; Li, J; Menaa, N; Mountain, R; Nisar, S; Randrianarivony, K; Sia, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, K; Bonvicini, G; Cinabro, D; Dubrovin, M; Lincoln, A; Asner, D M; Edwards, K W; Briere, R A; Ferguson, T; Tatishvili, G; Vogel, H; Watkins, M E; Rosner, J L
2007-07-27
We study semileptonic B decay to the exclusive charmless states pi, rho/omega, eta, and eta;{'} using the 16 fb(-1) CLEO Upsilon(4S) data sample. We find B(B0-->pi-l+nu)=(1.37+/-0.15stat+/-0.11sys)x10(-4) and B(B0-->rho-l+nu)=(2.93+/-0.37stat+/-0.37sys)x10(-4) and find evidence for B+-->eta'l+nu, with B(B+-->eta'l+nu)=(2.66+/-0.80stat+/-0.56sys)x10(-4). From our B-->pilnu rate for q2>16 GeV2 and lattice QCD, we find |Vub|=(3.6+/0.4stat+/0.2syst-0.4thy+0.6)x10(-3) [corrected
Bai, Feng; Johnson, Jennifer; Wang, Fan; Yang, Lei; Broniscer, Alberto; Stewart, Clinton F
2011-09-01
A sensitive and precise LC-ESI-MS/MS method for the determination of vandetanib (ZD6474) in human plasma and cerebrospinal fluid (CSF) using [(13)C,d(3)]-ZD6474 as an internal standard (ISTD) was developed and validated. Sample preparation consisted of a simple liquid-liquid extraction with tert-butyl methyl ether containing 0.1% or 0.5% ammonium hydroxide. ZD6474 and ISTD were separated on a Kinetex C18 column (2.6 μm, 50 mm × 2.1 mm) at ambient temperature with an isocratic mobile phase (acetonitrile/10mM ammonium formate=50/50, v/v, at pH 5.0) delivered at 0.11 mL/min. The retention time of both compounds was at 1.60 min in a runtime of three min. Detection was achieved by an API-3200 LC-MS/MS system, monitoring m/z 475.1/112.1 and m/z 479.1/116.2 for vandetanib and ISTD, respectively. The method was linear in the range of 0.25-50 ng/mL (R(2) ≥ 0.990) for the CSF curve and from 1.0 to 3000 ng/mL (R(2) ≥ 0.992) for the plasma curve. The mean recovery for vandetanib was 80%. Within-day and between-day precisions were ≤ 8.8% and ≤ 5.9% for CSF and plasma, respectively. Within-day and between-day accuracies ranged from 95.0 to 98.5% for CSF, and from 104.0 to 108.5% for plasma. Analysis of plasma from six different sources showed no matrix effect for vandetanib (MF=0.98, %CV ≤ 4.97, n=6). This method was successfully applied to the analysis of pharmacokinetic samples from children with brain tumors treated with oral vandetanib. Copyright © 2011 Elsevier B.V. All rights reserved.
Comets C/2003 X5-X11 and Y2-Y10 (SOHO)
NASA Astrophysics Data System (ADS)
Battams, K.; Boschat, M.; Zhou, X.-M.; Hoffman, T.; Leprette, X.; Matson, R.; Kracht, R.; Sachs, J.; Marsden, B. G.; Kisala, R.
2004-06-01
Further to IAUC 8356, K. Battams reports measurements for additional Kreutz sungrazing comets found on SOHO website C2 images by M. Boschat (C/2003 X5, X7, Y5, Y8), X.-m. Zhou (C/2003 X6, X9, X11), T. Hoffman (C/2003 X8), X. Leprette (C/2003 X10, Y2), R. Matson (2003 Y3, Y9, Y10), R. Kracht (C/2003 Y4, Y7), and J. Sachs (C/2003 Y6). C/2003 Y6 and Y7 were also visible on C3 images. The reductions by B. G. Marsden (and by R. Kisala for C/2003 Y8, Y9, Y10) and orbital elements by Marsden appear on the MPECs cited below. Comet 2003 UT R.A. (2000) Decl. MPEC C/2003 X5 Dec. 4.896 16 46.9 -24 12 2004-L24 C/2003 X6 6.396 16 52.2 -24 20 2004-L24 C/2003 X7 7.829 16 58.6 -24 27 2004-L24 C/2003 X8 8.246 17 00.9 -24 31 2004-L24 C/2003 X9 8.621 17 02.2 -24 34 2004-L24 C/2003 X10 11.188 17 14.5 -24 41 2004-L25 C/2003 X11 13.588 17 25.7 -24 57 2004-L25 C/2003 Y2 19.621 17 53.6 -25 08 2004-L25 C/2003 Y3 19.979 17 55.0 -25 02 2004-L25 C/2003 Y4 20.729 17 58.8 -25 14 2004-L25 C/2003 Y5 22.771 18 08.5 -25 08 2004-L25 C/2003 Y6 23.571 18 14.3 -27 22 2004-L26 C/2003 Y7 24.638 18 20.0 -27 44 2004-L26 C/2003 Y8 25.288 18 19.6 -25 00 2004-L67 C/2003 Y9 25.479 18 20.7 -24 46 2004-L67 C/2003 Y10 26.064 18 23.5 -24 50 2004-L67
2009-12-01
Protein from the Honeybee Apis mellifera L. J. Biol. Chem. 2004, 279, 4459– 4464. 12. Mead, J. C. New Scientist 2007, November issue. 13. Inscentinel...of explo- sives and other analytes.12,13 The antennal-specific protein-1 (ASP1), an OBP from honeybee, Apis mel- lifera, contains a C-terminal tail
Influence of oxygen, albumin and pH on copper dissolution in a simulated uterine fluid.
Bastidas, D M; Cano, E; Mora, E M
2005-06-01
The aim of this paper is to study the influence of albumin content, from 5 to 45 g/L, on copper dissolution and compounds composition in a simulated uterine solution. Experiments were performed in atmospheric pressure conditions and with an additional oxygen pressure of 0.2 atmospheres, at 6.3 and 8.0 pH values, and at a temperature of 37 +/- 0.1 degrees C for 1, 3, 7, and 30 days experimentation time. The copper dissolution rate has been determined using absorbance measurements, finding the highest value for pH 8.0, 35 g/L albumin, and with an additional oxygen pressure of 0.2 atmospheres: 674 microg/day for 1 day, and 301 microg/day for 30 days. X-ray photoelectron spectroscopy (XPS) results show copper(II) as the main copper oxidation state at pH 8.0; and copper(I) and metallic copper at pH 6.3. The presence of albumin up to 35 g/L, accelerates copper dissolution. For high albumin content a stabilisation on the copper dissolution takes place. Corrosion product layer morphology is poorly protective, showing paths through which copper ions can release.
Sánchez-Bayo, Francisco; Belzunces, Luc; Bonmatin, Jean-Marc
2017-11-01
A previous study claimed a differential behavioural resilience between spring or summer honey bees (Apis mellifera) and bumble bees (Bombus terrestris) after exposure to syrup contaminated with 125 µg L -1 imidacloprid for 8 days. The authors of that study based their assertion on the lack of body residues and toxic effects in honey bees, whereas bumble bees showed body residues of imidacloprid and impaired locomotion during the exposure. We have reproduced their experiment using winter honey bees subject to the same protocol. After exposure to syrup contaminated with 125 µg L -1 imidacloprid, honey bees experienced high mortality rates (up to 45%), had body residues of imidacloprid in the range 2.7-5.7 ng g -1 and exhibited abnormal behaviours (restless, apathetic, trembling and falling over) that were significantly different from the controls. There was incomplete clearance of the insecticide during the 10-day exposure period. Our results contrast with the findings reported in the previous study for spring or summer honey bees, but are consistent with the results reported for the other bee species.
Knösel, Michael; Ellenberger, David; Göldner, Yvonne; Sandoval, Paulo; Wiechmann, Dirk
2015-04-15
Sealant application during fixed appliances orthodontic treatment for enamel protection is common, however, reliable data on its durability in vivo are rare. This study aims at assessing the durability of a sealant (OpalSeal, Ultradent) for protection against white-spot lesion formation in orthodontic patients over 26 weeks in vivo, taking into account the provision or absence of an adequate oral hygiene. We tested the null hypothesis of (1) no significant abatement of the sealant after 26 weeks in fixed orthodontic treatment compared to baseline, and (2) no significant influence of the factor of brushing and oral hygiene (as screened by approximal plaque index, API) on the abatement of the sealant. Integrity and abatement of OpalSeal applicated directly following bracketing was assessed in thirty-six consecutive patients (n(teeth) = 796) undergoing orthodontic treatment with fixed appliances (male/female 12/24; mean age/SD 14.4/1.33 Y). Assessment of the fluorescing sealant preservation was by a black-light lamp, using a classification that was concepted in analogy to the ARI index: (3, sealant completely preserved; 2= > 50% preserved; 1 = <50%; 0 = no sealant observable) immediately following application (Baseline, T0), after 2 (T1), 8 (T2), 14 (T3), 20 (T4) and 26 weeks (T5). API was assessed at T0 and T1. Statistical analysis was by non-parametric repeated measures ANOVA (α = 5%, power >80%). At baseline, 43.4% of teeth had a positive API. Oral hygiene deteriorated after bracketing (T1, 53%) significantly. Null hypothesis (1) was rejected, while (2) was accepted: Mean values of both the well brushed and non-brushed anterior teeth undercut the score "1" at T3 (week 14). Despite a slightly better preservation of the sealer before and after T3 in not-sufficiently brushed (API-positive) teeth, this finding was statistically not significant. One single application of OpalSeal is unlikely to last throughout the entire fixed appliance treatment stage. On average, re-application of the sealant can be expected to be necessary after 3.5 months (week 14) in treatment.
Pharmaceuticals in water, fish and osprey nestlings in Delaware River and Bay
Bean, Thomas G.; Rattner, Barnett A.; Lazarus, Rebecca S.; Day, Daniel D.; Burket, S. Rebekah; Brooks, Bryan W.; Haddad, Samuel P.; Bowerman, William W.
2018-01-01
Exposure of wildlife to Active Pharmaceutical Ingredients (APIs) is likely to occur but studies of risk are limited. One exposure pathway that has received attention is trophic transfer of APIs in a water-fish-osprey food chain. Samples of water, fish plasma and osprey plasma were collected from Delaware River and Bay, and analyzed for 21 APIs. Only 2 of 21 analytes exceeded method detection limits in osprey plasma (acetaminophen and diclofenac) with plasma levels typically 2–3 orders of magnitude below human therapeutic concentrations (HTC). We built upon a screening level model used to predict osprey exposure to APIs in Chesapeake Bay and evaluated whether exposure levels could have been predicted in Delaware Bay had we just measured concentrations in water or fish. Use of surface water and BCFs did not predict API concentrations in fish well, likely due to fish movement patterns, and partitioning and bioaccumulation uncertainties associated with these ionizable chemicals. Input of highest measured API concentration in fish plasma combined with pharmacokinetic data accurately predicted that diclofenac and acetaminophen would be the APIs most likely detected in osprey plasma. For the majority of APIs modeled, levels were not predicted to exceed 1 ng/mL or method detection limits in osprey plasma. Based on the target analytes examined, there is little evidence that APIs represent a significant risk to ospreys nesting in Delaware Bay. If an API is present in fish orders of magnitude below HTC, sampling of fish-eating birds is unlikely to be necessary. However, several human pharmaceuticals accumulated in fish plasma within a recommended safety factor for HTC. It is now important to expand the scope of diet-based API exposure modeling to include alternative exposure pathways (e.g., uptake from landfills, dumps and wastewater treatment plants) and geographic locations (developing countries) where API contamination of the environment may represent greater risk.
Behavioral studies of learning in the Africanized honey bee (Apis mellifera L.).
Abramson, Charles I; Aquino, Italo S
2002-01-01
Experiments on basic classical conditioning phenomena in adult and young Africanized honey bees (Apis mellifera L.) are described. Phenomena include conditioning to various stimuli, extinction (both unpaired and CS only), conditioned inhibition, color and odor discrimination. In addition to work on basic phenomena, experiments on practical applications of conditioning methodology are illustrated with studies demonstrating the effects of insecticides on learning and the reaction of bees to consumer products. Electron microscope photos are presented of Africanized workers, drones, and queen bees. Possible sub-species differences between Africanized and European bees are discussed. Copyright 2002 S. Karger AG, Basel
Procedure improves line pipe Charpy test interpretation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rosenfeld, M.J.
1997-04-14
The Charpy V-notch (CVN) impact test is a method of characterizing a line-pipe material`s notch toughness and resistance to fracture growth. Although CVN testing of line pipe material is routine, test results are sometimes misinterpreted because of specimen size and load rate on actual toughness transition behavior. These effects are readily accounted for by a simple mathematical procedure, offered here, which enables extrapolation of the full-scale transition curve from as little as a single subsize specimen test. This procedure is useful when the toughness transition curve is incomplete or nonexistent. Toughness data may be incomplete because the API 5L toughnessmore » test establishes minimum performance at a single temperature, which does not reveal the full transition curve. Toughness data may be nonexistent because the first requirements for toughness testing of line pipe appeared in the 16th Edition of API 5LX in 1969, and those requirements remain at the option of the purchaser today.« less
The worldwide importance of honey bees as pollinators in natural habitats.
Hung, Keng-Lou James; Kingston, Jennifer M; Albrecht, Matthias; Holway, David A; Kohn, Joshua R
2018-01-10
The western honey bee ( Apis mellifera ) is the most frequent floral visitor of crops worldwide, but quantitative knowledge of its role as a pollinator outside of managed habitats is largely lacking. Here we use a global dataset of 80 published plant-pollinator interaction networks as well as pollinator effectiveness measures from 34 plant species to assess the importance of A. mellifera in natural habitats. Apis mellifera is the most frequent floral visitor in natural habitats worldwide, averaging 13% of floral visits across all networks (range 0-85%), with 5% of plant species recorded as being exclusively visited by A. mellifera For 33% of the networks and 49% of plant species, however, A. mellifera visitation was never observed, illustrating that many flowering plant taxa and assemblages remain dependent on non- A. mellifera visitors for pollination. Apis mellifera visitation was higher in warmer, less variable climates and on mainland rather than island sites, but did not differ between its native and introduced ranges. With respect to single-visit pollination effectiveness, A. mellifera did not differ from the average non- A. mellifera floral visitor, though it was generally less effective than the most effective non- A. mellifera visitor. Our results argue for a deeper understanding of how A. mellifera , and potential future changes in its range and abundance, shape the ecology, evolution, and conservation of plants, pollinators, and their interactions in natural habitats. © 2018 The Author(s).
Albanesi, Joseph; Wang, Hanzhi; Sun, Hui-Qiao; Levine, Beth; Yin, Helen
2015-11-02
For decades, phosphatidylinositol 4-phosphate (PtdIns4P) was considered primarily as a precursor in the synthesis of phosphatidylinositol(4,5)bisphosphate (PtdIns(4,5)P 2 ). More recently, specific functions for PtdIns4P itself have been identified, particularly in the regulation of intracellular membrane trafficking. PI4K2A/PI4KIIα (phosphatidylinositol 4-kinase type 2 α), one of the 4 enzymes that catalyze PtdIns4P production in mammalian cells, promotes vesicle formation from the trans-Golgi network (TGN) and endosomes. We recently identified a novel function for PI4K2A-derived PtdIns4P, as a facilitator of autophagosome-lysosome (A-L) fusion. We further showed that that this function requires the presence of the autophagic adaptor protein GABARAP (GABA[A] receptor-associated protein), which binds to PI4K2A and recruits it to autophagosomes. The mechanism whereby GABARAP-PI4K2A-PtdIns4P promotes A-L fusion remains to be defined. Based on other examples of phosphoinositide involvement in membrane trafficking, we speculate that it acts by recruiting elements of the membrane docking and fusion machinery.
Pharmacokinetics of theophylline after administration of suppositories formulation.
Abou-Basha, L I; Wahman, L F; Hamza, A; Aboul-Enein, Hassan Y
2005-01-01
Asthma is a public health problem for developed countries. It attacks all age groups but often starts in childhood. Theophylline ethanoate of piperazine in a suppository form is one of the treatments of asthmatic children. The pharmacokinetics of theophylline were evaluated in 24 healthy male subjects after administration of theophylline ethanoate of piperazine suppositories (PR) (Minophylline 500 mg. Alexandria Co.) and single injection intravenous (IV) of theophylline ethanoate of piperazine (Minophylline ampoules 500 mg Alexandria Co.). The theophylline serum levels were determined by an ELISA method. Peak theophylline plasma concentration, Cmax, (mean +/- S.D) was 21.5 +/- 2.10 microg/mL & 14 +/- 0.90 microg/mL; AUC(0-t), values were 80.9 and 67. 4 microg x ml x hr for the reference IV preparation and suppositories, respectively. The median peak time, Tmax, was 0.5 hr for theophylline rectal administration. The above mentioned results demonstrate the possibilities of using theophylline (Minophylline Suppositories--500 mg Alexandria Co.) in asthmatic children in rural and desert areas away from health care personnel.
MicroRNA-1 promotes apoptosis of hepatocarcinoma cells by targeting apoptosis inhibitor-5 (API-5).
Li, Dong; Liu, Yu; Li, Hua; Peng, Jing-Jing; Tan, Yan; Zou, Qiang; Song, Xiao-Feng; Du, Min; Yang, Zheng-Hui; Tan, Yong; Zhou, Jin-Jun; Xu, Tao; Fu, Zeng-Qiang; Feng, Jian-Qiong; Cheng, Peng; chen, Tao; Wei, Dong; Su, Xiao-Mei; Liu, Huan-Yi; Qi, Zhong-Chun; Tang, Li-Jun; Wang, Tao; Guo, Xin; Hu, Yong-He; Zhang, Tao
2015-01-02
Although microRNA-1 (miR-1) is a known liver cancer suppressor, the role of miR-1 in apoptosis of hepatoma cells has remained largely unknown. Our study shows that ectopic miR-1 overexpression induced apoptosis of liver hepatocellular carcinoma (HepG2) cells. Apoptosis inhibitor 5 (API-5) was found to be a potential regulator of miR-1 induced apoptosis, using a bioinformatics approach. Furthermore, an inverse relationship between miR-1 and API-5 expression was observed in human liver cancer tissues and adjacent normal liver tissues. Negative regulation of API-5 expression by miR-1 was demonstrated to promote apoptosis of HepG2 cells. Our study provides a novel regulatory mechanism of miR-1 in the apoptosis of hepatoma cells. Copyright © 2014 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.
Doğan, Serap
2006-05-20
Systemic carbonic anhydrase (CA) inhibitors are among the most powerful agents to lower intraocular pressure. Unfortunately, their use is frequently accompanied by undesired side effects. Some are due to the relatively large amounts of drug that have to be systematically administered to inhibit the CA in the ciliary processes. The aim of the present work was to study in vitro effects of some pesticides on CA enzyme obtained from blood of fish, which play a key role in salt- and osmoregulation and acid-base balance in the fish, Oncorhynchus mykiss and Cyprinus carpio carpio living in freshwaters, and compared with CA inhibitors. CA activities were significantly inhibited by pesticides and inhibitors. I(50) values of O. mykiss CA enzyme inhibited by lambda-cyhalothrin, deltametrin, diozinon, dorzolamide and brinzolamide were 6.05 x 10(-4), 1.48 x 10(-5), 6.84 x 10(-3), 3.82 x 10(-5) and 1.80 x 10(-6) mol/l, and that for C. c. carpio 6.86 x 10(-4), 4.70 x 10(-4), 3.92 x 10(-3), 8.34 x 10(-6) and 1.42 x 10(-6) mol/l, respectively. The pesticides used in this study inhibited the CA activity from different fish species to various degrees. It was found that the most effective inhibitor of CA enzyme within pesticides used was detrametrin. These findings observed in vitro could be useful in the understanding of the toxic effects that pesticides elicit on aquatic organisms in vivo.
Curtin, Vincent; Amharar, Youness; Hu, Yun; Erxleben, Andrea; McArdle, Patrick; Caron, Vincent; Tajber, Lidia; Corrigan, Owen I; Healy, Anne Marie
2013-01-07
The coprocessing of active pharmaceutical ingredient (API) with an excipient which has a high glass transition temperature (T(g)) is a recognized strategy to stabilize the amorphous form of a drug. This work investigates whether coprocessing a model API, sulfadimidine (SDM) with a series of low T(g) excipients, prevents or reduces amorphization of the crystalline drug. It was hypothesized that these excipients could exert a T(g) lowering effect, resulting in composite T(g) values lower than that of the API alone and promote crystallization of the drug. Milled SDM and comilled SDM with glutaric acid (GA), adipic acid (AA), succinic acid (SA), and malic acid (MA) were characterized with respect to their thermal, X-ray diffraction, spectroscopic, and vapor sorption properties. SDM was predominantly amorphous when milled alone, with an amorphous content of 82%. No amorphous content was detected by dynamic vapor sorption (DVS) on comilling SDM with 50% w/w GA, and amorphous content of the API was reduced by almost 30%, relative to the API milled alone, on comilling with 50% w/w AA. In contrast, amorphization of SDM was promoted on comilling with 50% w/w SA and MA, as indicated by near-infrared (NIR) spectroscopy. Results indicated that the API was completely amorphized in the SDM:MA comilled composite. The saturated solubility of GA and AA in the amorphous API was estimated by thermal methods. It was observed that the T(g) of the comelt quenched composites reached a minimum and leveled out at this solubility concentration. Maximum crystallinity of API on comilling was reached at excipient concentrations comparable to the saturated concentration solubility of excipient in the API. Moreover, the closer the Hildebrand solubility parameter of the excipient to the API, the greater the inhibition of API amorphization on comilling. The results reported here indicate that an excipient with a low T(g) coupled with high solubility in the API can prevent or reduce the generation of an amorphous phase on comilling.
Mannina, Luisa; Sobolev, Anatoly P; Di Lorenzo, Arianna; Vista, Silvia; Tenore, Gian Carlo; Daglia, Maria
2015-07-01
In 2008 a Slow Food Presidium was launched in Sicily (Italy) for an early warning of the risk of extinction of the Sicilian native breed of black honeybee (Apis mellifera L. ssp sicula). Today, the honey produced by these honeybees is the only Sicilian honey produced entirely by the black honeybees. In view of few available data regarding the chemical composition of A. mellifera ssp. sicula honeys, in the present investigation the chemical compositions of sulla honey (Hedysarum coronarium L.) and dill honey (Anethum graveolens L.) were studied with a multimethodological approach, which consists of HPLC-PDA-ESI-MSn and NMR spectroscopy. Moreover, three unifloral honeys (lemon honey (obtained from Citrus limon (L.) Osbeck), orange honey (Citrus arantium L.), and medlar honey (Eriobotrya japonica (Thunb.) Lindl)), with known phenol and polyphenol compositions, were studied with NMR spectroscopy to deepen the knowledge about sugar and amino acid compositions.
2011 NASA Lunabotics Mining Competition for Universities: Results and Lessons Learned
NASA Technical Reports Server (NTRS)
Mueller, Robert P.; Murphy, Gloria A.
2011-01-01
Overview: Design, build & compete remote controlled robot (Lunabot). Excavate Black Point 1 (BP-1) Lunar Simulant. Deposit minimum of 10 kg of BP-1 within 15 minutes $5000, $2500, $1000 Scholarships for most BP-1 excavated. May 23-28, 2011. Kennedy Space Center, FL. International Teams Allowed for the First Time. What is a Lunabot? a) Robot Controlled Remotely or Autonomously. b) Visual and Auditory Isolation from Operator. c) Excavates Black Point 1 (BP-l) Simulant. d) Weight Limit - 80 kg. e)Dimension Limits -1.5m width x .75m length x 2m height. f) Designed, Built and Tested by University Student Teams.
Identification of (2-aminopropyl)indole positional isomers in forensic samples.
Scott, Kenneth R; Power, John D; McDermott, Seán D; O'Brien, John E; Talbot, Brian N; Barry, Michael G; Kavanagh, Pierce V
2014-01-01
In 2012, 5-(2-aminopropyl)indole (5-API, 5-IT) was reported by Norwegian authorities to the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA) via the Early Warning System (EWS). The 3- isomer, 3-(2-aminopropyl)indole (3-API, AMT, alpha-methyltryptamine), has been available on the recreational drugs market for a somewhat longer time, having first been reported to the EMCDDA by Finnish authorities in 2001. Both isomers are available from online vendors of 'legal highs'. Recently, three forensic drug cases (two tablets and one powder) were presented for routine analysis and the active constituent was tentatively identified as an API isomer. The six positional isomers (2-, 3-, 4-, 5-, 6- and 7-(2-aminopropyl)indoles) were synthesized and analyses by a combination gas chromatography-mass spectrometry (GC-MS), and liquid chromatography-mass spectrometry (LC-MS) showed that these could be readily discriminated thus facilitating the identification of 3-API in the tablets and 5-API in the powder. With exception of 5- and 6-APIs, which co-eluted, it was found possible to separate the isomers by GC without derivatization. LC separation also proved to be a feasible method for the discrimination of the isomers. Although the 2- and 7- isomers were not fully resolved by LC, it was found possible to distinguish them using their product ion spectra as the 2- isomer produced the m/z 132 fragment ion formed by loss of vinylamine, whereas the 7- isomer formed m/z 158 through loss of methylamine. In the synthesis 2-API, a novel tricyclic by-product was formed in an annulation reaction where the reaction solvent, tetrahydrofuran, was incorporated into the molecule. Copyright © 2013 John Wiley & Sons, Ltd.
Shu, Xiao-ming; Xu, Can-can; Liu, Rui; Zhao, Yuan; Chen, Lü-jun
2016-02-15
Nanoscale Ni/Fe was applied to biologically treated effluent of chemical dyestuff wastewater. The removal rates of absorbable organic halogens (AOX) and chroma were investigated at different Ni loadings (0-5%), initial wastewater pH (4.1-10.0), Ni/Fe dosage (1-5 g x L(-1)) and reaction time (0.5-96 h). The results showed that the removal rates of AOX and chroma firstly increased and then decreased with the increase of the Ni loading, while continuously increased with the decrease of the initial wastewater pH and the increase of Ni/Fe dosage. The optimal condition was Ni loading of 1%, initial wastewater pH of 4.1 and Ni/Fe dosage of 3 g x L(-1), under which 29.2% of AOX and 79.6% of chroma were removed after 24 h reaction, and 50.6% of AOX and 80.7% of chroma were removed after 96 h reaction. GC-MS analysis revealed that toxicants such as chlorinated anilines, p-nitroaniline, 4-methoxy-2-nitroaniline and halogenated hydrocarbons were efficiently removed.
Genetics Home Reference: Knobloch syndrome
... for This Page Fukai N, Eklund L, Marneros AG, Oh SP, Keene DR, Tamarkin L, Niemelä M, ... qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map Subscribe Customer Support USA. ...
WITHDRAWN: Ivory vertebra and systemic mastocytosis. Comments on the article by Frenzel et al.
Marhadour, Thierry; Saraux, Alain
2013-06-02
L'éditeur a le regret de vous informer que cet article ayant déjà été publié dans:
Theoretical Investigation of 3-D Shock Wave-Turbulent Boundary Layer Interactions. Part 7
1988-11-15
Particle traces - y/= 1.0 (80 SFC) 1 18II I I l U0 Flow .>4 .16. on Ange 8deg -5.0 9.81 24.6 39.4 54,2 69.0 0.1 N....,..X (b) CaseFG n Angle =8 dog . (a...generated by a sharp fin geometry. Both porn - zyada tries chosmn are ’d-mensouess’ and the interactions in the rij is the stress tensor (laminar + turbulent
Charge-Coupled Devices for Analog Signal Processing -- A Circuit Study
1976-03-01
FNG( T+H/2) ) /H (X2»Y3»Z2) 1*2*K2-^2*K3*’ɜ) /o.3 ECK TO SEE IF IT’S TIME TO PRINT OUT. SGN(L)*1.’.5E-9>=i^« THEN 1120 80 ^^^^ LEI rt=b 113^ LEI a...DISTRIBUTION LIST No. Copies 1. Defense Docmnentation Center 2 Cameron Station Alexandria, Virginia 22314 2. Library, Code 0212 2 Naval Postgraduate School
Blume, Henning H; Wedemeyer, Ralf-Steven; Donath, Frank; Roscher, Katrin; Elvert, Gerd; Wagner, Daniel; Bley, Oliver; Vuia, Alexander; Todorova-Sanjari, Marina; Villalobos, Ramon; Schug, Barbara
2015-04-01
To establish the relative bioavailability (rBA) between two p.o. 5-mg levomethadone hydrochloride formulations, i.e., L-Polamidon® 5 mg tablets (test) vs. L-Polamidon® solution for substitution (reference). To assess the safety and tolerability of both formulations. A total of 33 healthy male subjects, aged 29 ± 6 years (BMI: 23.9 ± 2.5 kg/m2) completed this single center, open-label, randomized, 2-period cross-over study with single dose administrations under fasting conditions and coadministration with naltrexone for safety reasons. Administrations of both investigational products were separated by a washout period of at least 2 weeks, i.e., 13 treatmentfree days. The total dose for each subject was 2 x 5 mg resulting in 10 mg levomethadone hydrochloride. For pharmacokinetic evaluation, blood samples were withdrawn until 72 hours postdose. A validated non-stereoselective liquid chromatography-tandem mass spectroscopy method (LC-MS/MS) was applied for the determination of levomethadone in plasma. The lower limit of quantitation was 0.100 ng/mL. Adverse events were descriptively analyzed in the study population. The geometric means of the parameters related with the extent of total exposure of levomethadone, i.e., AUC(0-tlast) and AUC(0-∞), were 244.422 ng x h/mL and 332.999 ng x h/mL for test and 246.837 ng x h/mL and 329.467 ngÃh/mL for reference, respectively. The geometric means of the peak exposure for levomethadone, i.e., Cmax, were 8.923 ng/mL for test and 8.635 ng/mL for reference. The point estimates (PEs) of the Test/Reference (T/R) adjusted geometric mean ratios of AUC(0-last), AUC(0-∞), and C(max) were 99.20%, 101.42%, and 104.11%, respectively, and all of them showed 90%-confidence intervals (CIs) within the range of 80.00 - 125.00% as suggested by regulatory requirements for bioequivalence assessment In total, 21 subjects experienced 55 AEs during the study, the most frequently reported AE, i.e., headache, accounted for 13 out of the total 55 AEs (23.6%) and no AEs of severe intensity were reported. Bioequivalence could be demonstrated in terms of rate and extent of absorption after administration of test and reference products under naltrexone protection. Concerning the safety evaluation, no negative implications on the possible use of the test formulation could be determined.
Harting, Julia; Kleinebudde, Peter
2018-04-01
Raman spectroscopy was evaluated as a process analytical technology (PAT) tool for continuous API quantification during twin-screw wet granulation. Therefore, a Raman probe was implemented in front of the granulator barrel. This setup enabled the collection of Raman spectra upon a constant granule flow. To develop an in-line PLS calibration model, eight binary mixtures of the API and lactose monohydrate with API contents between 5 and 50% were pre-blended and granulated in a twin-screw granulator with a screw speed of 150 rpm and a powder feed rate of 40 g/min. Water was used as a granulation liquid with different liquid to solid ratios depending on the API content. Ibuprofen and diclofenac sodium were chosen as model drugs and separated PLS models were built for each API. The predictive performance of the developed PLS models was determined by granulating and monitoring new test samples containing different API concentrations. This evaluation showed that the models were able to predict the API concentration with an RMSEP of 0.59% for ibuprofen and 1.5% for diclofenac sodium. In a second part, the developed in-line Raman spectroscopic method was used to determine the API concentration during a split feeding process. Therefore, the API and lactose monohydrate were added by two independently adjustable feeders into the twin-screw granulator barrel. The in-line spectroscopy analysis which was verified by UV-analysis indicated that the mixing ability of the twin-screw granulator was good for the used settings and all adjusted API concentrations. Copyright © 2018 Elsevier B.V. All rights reserved.
Terrill, T H; Larsen, M; Samples, O; Husted, S; Miller, J E; Kaplan, R M; Gelaye, S
2004-04-15
Infection with gastrointestinal nematodes, particularly Haemonchus contortus, is a major constraint to goat production in the southeastern United States. Non-anthelmintic control alternatives are needed due to increasing resistance of these nematodes to available anthelmintics. Two studies were completed in Central Georgia in August 1999, and April-May 2000, using Spanish does naturally infected with Haemonchus contortus, Trichostongylus colubriformis, and Cooperia spp. to evaluate effectiveness of nematode-trapping fungi as a biological control agent. In the first experiment, five levels of Duddingtonia flagrans spores were mixed with a complete diet and fed once daily to the does (three per treatment) in metabolism crates. The treatment concentrations were (1) 5 x 10(5), (2) 2.5 x 10(5), (3) 10(5), and (4) 5 x 10(4) spores per kilogram body weight (BW), and (5) no spores. Fungal spores were fed for the first 7 days of the 14-day trial, and fecal samples were collected daily from individual animals for analysis of fecal egg count and establishment of fecal cultures. Efficacy of the fungus at reducing development of infective larvae (L3) in the fecal cultures was evaluated. The mean reduction in L3 from day 2 of the treatment period until the day after treatment stopped (days 2-8) was 93.6, 80.2, 84.1, and 60.8% for animals given the highest to lowest spore doses, respectively. Within 3-6 days after termination of fungal spore feedings, reduction in L3 development was no longer apparent in any of the treated animals. In a second experiment, effectiveness of 2.5 x 10(5) spores of D. flagrans per kilogram BW fed to does every day, every second day, and every third day was evaluated. Reduction in L3 development by daily feeding was less in the second experiment than in the first experiment. Daily fungal spore feeding provided more consistent larval reduction than intermittant feeding (every second or third day). When fed daily under controlled conditions, D. flagrans was effective in significantly reducing development of L3 and appears to be an effective tool for biocontrol of parasitic nematodes in goats.
Reynaldi, Francisco J; Lucia, Mariano; Genchi Garcia, María L
2015-01-01
Nowadays several invertebrate pollinators of crops and wild plants are in decline as result of multiple and, sometimes, unknown factors; among them, the modern agricultural practices, pests and diseases are postulated as the most important factors. Bees of the genus Xylocopa are considered effective pollinators of passion fruit crops in tropical regions, as well as important pollinators in wild plants, but these bees are attacked by several pathogens that affect different stages in their life cycle. The fungal species of the genus Ascosphaera are commonly associated with social and solitary bee larvae causing chalkbrood disease. The aim of the present study was to demonstrate the presence of Ascosphaera apis affecting larvae of Xylocopa augusti in South America. For this purpose, A. apis was isolated from affected larvae in YGPSA medium. Final identification was run out by three techniques: (1) Microscopic examination of the hyphae and sizes of the fruiting bodies; (2) Mating test, and specific sexual compatibility test, and (3) PCR detection, using specific primers. This study demonstrates for the first time the presence of A. apis affecting larvae of X. augusti in South America. The evidence of A. apis affecting the larvae of X. augusti, and the fact that the sharing of pathogens between different bee species has been underestimated, suggests the need for further epidemiological studies in order to determine not only the prevalence of this pathogen among wild pollinators, but also its relationship to the sudden collapse of honey bee colonies in this region. Copyright © 2014 Revista Iberoamericana de Micología. Published by Elsevier Espana. All rights reserved.
Ozonation of clofibric acid catalyzed by titanium dioxide.
Rosal, Roberto; Gonzalo, María S; Rodríguez, Antonio; García-Calvo, Eloy
2009-09-30
The removal of clofibric acid from aqueous solution has been investigated in catalytic and non-catalytic semicontinuous ozonation runs. Kinetic data were analyzed using second order expressions for the reaction between organics and ozone or hydroxyl radicals. Catalytic runs used a commercial titanium dioxide catalyst consisting of fumed colloidal particles. The kinetic constant of the non-catalytic ozonation of clofibric acid at pH 3 was 8.16 x 10(-3)+/-3.4 x 10(-4)L mmol(-1)s(-1). The extent of mineralization during non-catalytic runs ranged from 50% at pH 7 to 20% at pH 3 in a reaction that essentially took place during the first 10-20 min. The catalyst increased the total extent of mineralization, its effect being more important during the first part of the reaction. The pseudo-homogeneous catalytic rate constant was 2.17 x 10(-2) L mmol(-1)s(-1) at pH 3 and 6.80 x 10(-1)L mmol(-1)s(-1) at pH 5, with up to a threefold increase with respect to non-catalytic constants using catalyst load of 1g/L. A set of stopped-flow experiments were designed to elucidate the role of catalyst, whose effect was probably due to the adsorption of organics on catalytic sites rather than to the promotion of ozone decomposition.
[Distribution of dimethylsulfoxide (DMSO) in the surface water of the Yellow Sea and the Bohai Sea].
Wang, Min; Zhang, Hong-Hai; Yang, Gui-Peng
2013-01-01
The horizontal distributions and diurnal variations of particulate and dissolved dimethylsulfoxide (DMSOp, DMSOd) were studied in the surface water of the Yellow Sea and the Bohai Sea in June, 2011. The determination of DMSO was based on the DMS produced by NaBH4 reduction, which was analyzed using the purge-and-trap technique coupled with gas chromatographic separation and flame photometric detection. The concentrations of DMSOp and DMSOd ranged from 5.43 to 18.35 nmol x L(-1) and from 4.75 to 43.80 nmol x L(-1), respectively, with average values of (11.47 +/- 0.25) nmol x L(-1) and (13.42 +/- 0.58) nmol x L(-1). The results showed that no relationship was found between DMSOp and environmental factors such as chlorophyll a (Chl-a), temperature and salinity, whereas a positive correlation was observed between DMSOp/Chl-a and salinity, indicating that intracellular DMSO could act as a cryo-osmoregulator. A significant relationship was also found between DMSOd and dimethylsulfide (DMS), whereas there was no relationship between DMSOd and DMSOp or DMSOd and bacteria, implying that DMSOd in the surface water was produced mainly through the photochemical oxidation of DMS. In addition, both the DMSOp and DMSOd concentrations exhibited obvious diurnal variations with the higher values in the day time.
Fadda, M E; Pisano, M B; Scaccabarozzi, L; Mossa, V; Deplano, M; Moroni, P; Liciardi, M; Cosentino, S
2013-01-01
This study reports a rapid PCR-based technique using a one-enzyme RFLP for discrimination of yeasts isolated from bovine clinical and subclinical mastitis milk samples. We analyzed a total of 1,486 milk samples collected over 1 yr in south Sardinia and northern Italy, and 142 yeast strains were preliminarily grouped based on their cultural morphology and physiological characteristics. Assimilation tests were conducted using the identification kit API ID 32C and APILAB Plus software (bioMérieux, Marcy l'Etoile, France). For PCR-RFLP analysis, the 18S-ITS1-5.8S ribosomal(r)DNA region was amplified and then digested with HaeIII, and dendrogram analysis of RFLP fragments was carried out. Furthermore, within each of the groups identified by the API or PCR-RFLP methods, the identification of isolates was confirmed by sequencing of the D1/D2 region using an ABI Prism 310 automatic sequencer (Applied Biosystems, Foster City, CA). The combined phenotypic and molecular approach enabled the identification of 17 yeast species belonging to the genera Candida (47.9%), Cryptococcus (21.1%), Trichosporon (19.7%), Geotrichum (7.1%), and Rhodotorula (4.2%). All Candida species were correctly identified by the API test and their identification confirmed by sequencing. All strains identified with the API system as Geotrichum candidum, Cryptococcus uniguttulatus, and Rhodotorula glutinis also produced characteristic restriction patterns and were confirmed as Galactomyces geotrichum (a teleomorph of G. candidum), Filobasidium uniguttulatum (teleomorph of Crypt. uniguttulatus), and R. glutinis, respectively, by D1/D2 rDNA sequencing. With regard to the genus Trichosporon, preliminary identification by API was problematic, whereas the RFLP technique used in this study gave characteristic restriction profiles for each species. Moreover, sequencing of the D1/D2 region allowed not only successful identification of Trichosporon gracile where API could not, but also correct identification of misidentified isolates. In conclusion, the 18S-ITS1-5.8S region appears to be useful in detecting genetic variability among yeast species, which is valuable for taxonomic purposes and for species identification. We have established an RFLP database for yeast species identified in milk samples using the software GelCompar II and the RFLP database constitutes an initial method for veterinary yeast identification. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Forbes Fld, Kansas. Revised Uniform Summary of Surface Weather Observations (RUSSWO). Parts A-F.
1981-12-23
8217 ReI. Huon. X11 Srq q SI ioI,,S £1 -OF 32F ’ .67F T 73F , .o80F * 93F - Total S Dry Bulb _________2_ 9B . l{b1 3 7 0 .1 , ! , "..’O Porn , 90310, 2...TOTAL (F) 0 1-2 3.4 5.6 7- 8 9.10 11 .12 13.14..16 17.18 9.202_22123.24 25 -2627.28 29.30 31 D.B.W.S. BoI W , b D. Po., 1/37 T"I L !.2’ 2.7’ 4.V
Test Operations Procedure (TOP) 02-2-603A Vehicle Fuel Consumption
2012-05-10
API) Hydrometer . The API Hydrometer is used for accurate determination of the density, relative density (specific gravity), or API gravity of... Hydrometer Method. 5. TOP 02-2-505, Inspection and Preliminary Operation of Vehicles, 4 February 1987. 6. TOP 02-1-003, Hybrid Electric
Social Reinforcement Delays in Free-Flying Honey Bees (Apis mellifera L.)
Craig, David Philip Arthur; Grice, James W.; Varnon, Chris A.; Gibson, B.; Sokolowski, Michel B. C.; Abramson, Charles I.
2012-01-01
Free-flying honey bees (Apis mellifera L.) reactions were observed when presented with varying schedules of post-reinforcement delays of 0 s, 300 s, or 600 s. We measured inter-visit-interval, response length, inter-response-time, and response rate. Honey bees exposed to these post-reinforcement delay intervals exhibit one of several patterns compared to groups not encountering delays, and had longer inter-visit-intervals. We observed no group differences in inter-response time. Honey bees with higher response rates tended to not finish the experiment. The removal of the delay intervals increased response rates for those subjects that completed the trials. PMID:23056425
ERIC Educational Resources Information Center
Ashwell, Tim; Elam, Jesse R.
2017-01-01
The ultimate aim of our research project was to use the Google Web Speech API to automate scoring of elicited imitation (EI) tests. However, in order to achieve this goal, we had to take a number of preparatory steps. We needed to assess how accurate this speech recognition tool is in recognizing native speakers' production of the test items; we…
Hahm, Hyeouk Chris; Song, In Han; Ozonoff, Al; Sassani, Jessica C
2009-01-01
To describe the proportion of HIV testing in the past 12 months among sexually experienced Asian and Pacific Islander (API) women and to investigate to what extent routine gynecologic care (RGC) increases HIV testing among API women. Data were derived from Wave III of the National Longitudinal Study of Adolescent Health (Add Health). Analyses were limited to 7,576 sexually experienced women (White, n = 4,482 [68.5%]; Black, n = 1,693 [25.6%]; Hispanic, n = 923 [13.9%]; API, n = 478 [7.2%]) aged 18-27 years. Multiple logistic regression analyses were used to estimate the association between RGC and HIV testing after controlling for predisposing, need, and enabling factors. On average, 22.8% (n = 1,504) of sexually experienced women reported HIV testing in the past year. API women had the lowest proportion of testing (17.2%), and Black women had the highest (26.2%). Overall, 60.2% of API women reported receiving RGC; however, only 15.5% of API who received RGC reported HIV testing. After controlling for covariates, significantly positive associations were found for White, Black, and Hispanic women between RGC and HIV testing; however, there was no evidence that RGC was associated with HIV testing among API women. Our data suggest that RGC does not [corrected] increase HIV testing among API women. To eliminate disparities in HIV testing service utilization among API women, appropriate efforts should be directed to better understand the barriers and facilitators of HIV testing among this population.
Hematologic and plasma biochemistry reference intervals of healthy adult barn owls (Tyto alba).
Szabo, Zoltan; Klein, Akos; Jakab, Csaba
2014-06-01
Hematologic and plasma biochemistry parameters of barn owls (Tyto alba) were studied in collaboration by the Exotic Division of the Faculty of Veterinary Science of the Szent Istvan University and the Eötvös Loránd University, both in Budapest, Hungary. Blood samples were taken from a total of 42 adult barn owls kept in zoos and bird repatriation stations. The following quantitative and qualitative hematologic values were determined: packed cell volume, 46.2 +/- 4%; hemoglobin concentration, 107 +/- 15 g/L; red blood cell count, 3.2 +/- 0.4 x 10(12)/L; white blood cell count, 13.7 +/- 2.7 x 10(9)/L; heterophils, 56.5 +/- 11.5% (7.8 +/- 2 x 10(9)/L); lymphocytes, 40.3 +/- 10.9% (5.5 +/- 1.9 x 10(9)/L); monocytes, 1.8 +/- 2.1% (0.3 +/- 0.3 x 10(9)/ L); eosinophils, 1 +/- 1% (0.1 +/- 0.1 x 10(9)/L); and basophils, 0.6 +/- 0.5% (0.1 +/- 0.1 x 10(9)/L). The following plasma biochemistry values also were determined: aspartate aminotransferase, 272 +/- 43 U/L; L-gamma-glutamyltransferase, 9.5 +/- 4.7 U/L; lipase, 31.7 +/- 11.1 U/L; creatine kinase, 2228 +/- 578 U/L; lactate dehydrogenase, 1702 +/- 475 U/L; alkaline phosphatase, 358 +/- 197 U/L; amylase, 563 +/- 114 U/L; glutamate dehydrogenase, 7.5 +/- 2.5 U/L; total protein, 30.6 +/- 5.3 g/L; uric acid, 428 +/- 102 micromol/L; and bile acids, 43 +/- 18 micromol/L. These results provide reliable reference values for the clinical interpretation of hematologic and plasma biochemistry results for the species.
Refrigerator storage of expressed human milk in the neonatal intensive care unit.
Slutzah, Meredith; Codipilly, Champa N; Potak, Debra; Clark, Richard M; Schanler, Richard J
2010-01-01
To provide recommendations for refrigerator storage of human milk, the overall integrity (bacterial growth, cell counts, and component concentrations) of milk was examined during 96 hours of storage at 4 degrees C. Fresh milk samples (n = 36) were divided and stored at 4 degrees C for 0, 24, 48, 72, and 96 hours. At each time, pH, white cell count, and osmolality were measured and additional samples were stored at -80 degrees C until analyzed for bacteria and concentrations of lactoferrin, secretory (s)IgA, fat, fatty acids, and protein. There were no significant changes for osmolality, total and Gram-negative bacterial colony counts or concentrations of sIgA, lactoferrin, and fat. Gram-positive colony counts (2.9 to 1.6 x 10(5) colony-forming units per mL), pH (7.21 to 6.68), white blood cell counts (2.31 to 1.85 x 10(6) cells per mL), and total protein (17.5 to 16.7 g/L) declined, and free fatty acid concentrations increased (0.35 to 1.28 g/L) as storage duration increased, P < .001. Changes were minimal and the overall integrity of milk during refrigerator storage was preserved. Fresh mother's milk may be stored at refrigerator temperature for as long as 96 hours.
Component resolution reveals additional major allergens in patients with honeybee venom allergy.
Köhler, Julian; Blank, Simon; Müller, Sabine; Bantleon, Frank; Frick, Marcel; Huss-Marp, Johannes; Lidholm, Jonas; Spillner, Edzard; Jakob, Thilo
2014-05-01
Detection of IgE to recombinant Hymenoptera venom allergens has been suggested to improve the diagnostic precision in Hymenoptera venom allergy. However, the frequency of sensitization to the only available recombinant honeybee venom (HBV) allergen, rApi m 1, in patients with HBV allergy is limited, suggesting that additional HBV allergens might be of relevance. We performed an analysis of sensitization profiles of patients with HBV allergy to a panel of HBV allergens. Diagnosis of HBV allergy (n = 144) was based on history, skin test results, and allergen-specific IgE levels to HBV. IgE reactivity to 6 HBV allergens devoid of cross-reactive carbohydrate determinants (CCD) was analyzed by ImmunoCAP. IgE reactivity to rApi m 1, rApi m 2, rApi m 3, nApi m 4, rApi m 5, and rApi m 10 was detected in 72.2%, 47.9%, 50.0%, 22.9%, 58.3%, and 61.8% of the patients with HBV allergy, respectively. Positive results to at least 1 HBV allergen were detected in 94.4%. IgE reactivity to Api m 3, Api m 10, or both was detected in 68.0% and represented the only HBV allergen-specific IgE in 5% of the patients. Limited inhibition of IgE binding by therapeutic HBV and limited induction of Api m 3- and Api m 10-specific IgG4 in patients obtaining immunotherapy supports recent reports on the underrepresentation of these allergens in therapeutic HBV preparations. Analysis of a panel of CCD-free HBV allergens improved diagnostic sensitivity compared with use of rApi m 1 alone, identified additional major allergens, and revealed sensitizations to allergens that have been reported to be absent or underrepresented in therapeutic HBV preparations. Copyright © 2014 The Authors. Published by Mosby, Inc. All rights reserved.
Yang, Fengyuan; Su, Yongchao; Zhang, Jingtao; DiNunzio, James; Leone, Anthony; Huang, Chengbin; Brown, Chad D
2016-10-03
The production of amorphous solid dispersions via hot melt extrusion (HME) relies on elevated temperature and prolonged residence time, which can result in potential degradation and decomposition of thermally sensitive components. Herein, the rheological properties of a physical mixture of polymer and an active pharmaceutical ingredient (API) were utilized to guide the selection of appropriate HME processing temperature. In the currently studied copovidone-nifedipine system, a critical temperature, which is substantially lower (∼13 °C) than the melting point of crystalline API, was captured during a temperature ramp examination and regarded as the critical point at which the API could molecularly dissolve into the polymer. Based on the identification of this critical point, various solid dispersions were prepared by HME processing below, at, and above the critical temperature (both below and above the melting temperature (T m ) of crystalline API). In addition, the resultant extrudates along with two control solid dispersions prepared by physical mixing and cryogenic milling were assessed by X-ray diffraction, differential scanning calorimetry, hot stage microscopy, rheology, and solid-state NMR. Physicochemical properties of resultant solid dispersions indicated that the identified critical temperature is sufficient for the polymer-API system to reach a molecular-level mixing, manifested by the transparent and smooth appearance of extrudates, the absence of API crystalline diffraction and melting peaks, dramatically decreased rheological properties, and significantly improved polymer-API miscibility. Once the critical temperature has been achieved, further raising the processing temperature only results in limited improvement of API dispersion, reflected by slightly reduced storage modulus and complex viscosity and limited improvement in miscibility.
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2011 CFR
2011-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
30 CFR 250.1203 - Gas measurement.
Code of Federal Regulations, 2013 CFR
2013-07-01
... follow the recommendations in API MPMS or RP and AGA as incorporated by reference in 30 CFR 250.198, including the following additional editions: (i) API RP 86 (incorporated by reference as specified in § 250.... If an electronic data recorder is used, you must follow the recommendations in API MPMS. (5) Take...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2014 CFR
2014-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2013 CFR
2013-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
30 CFR 250.1203 - Gas measurement.
Code of Federal Regulations, 2014 CFR
2014-07-01
... follow the recommendations in API MPMS or RP and AGA as incorporated by reference in 30 CFR 250.198, including the following additional editions: (i) API RP 86 (incorporated by reference as specified in § 250.... If an electronic data recorder is used, you must follow the recommendations in API MPMS. (5) Take...
30 CFR 250.1203 - Gas measurement.
Code of Federal Regulations, 2012 CFR
2012-07-01
... follow the recommendations in API MPMS or RP and AGA as incorporated by reference in 30 CFR 250.198, including the following additional editions: (i) API RP 86 (incorporated by reference as specified in § 250.... If an electronic data recorder is used, you must follow the recommendations in API MPMS. (5) Take...
49 CFR 195.428 - Overpressure safety devices and overfill protection systems.
Code of Federal Regulations, 2012 CFR
2012-10-01
... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...
Study of Helicopter Roll Control Effectiveness Criteria.
1986-04-01
a EE-E~Cd -P1 P1P1 1CP m0 cd 2 c. .4 .0 . l 0- P1 1. -P 4-NC4 aV .4 0 0 0 0 .’C d d0 df ’Sasg.- oala 8isaaaa 000000 4 Ip~ ~ W, . . 1 o5i 0~ 16a !1...0nemeee erm~ Cal S-!1 4 !1 14 C !V : - ro0 I 0 010 mm a, ma "O acaro . r * za * An PO U n249X rc W ti C! e4! 19 40: t rIet m1! C4 F. 2 ~ee i mIon f I e...Copability 20 - -80 -60 -40 -20 20 40 60 80 BANK ANGLE CHANGE, Ave (dog) IID. Sw -40 -60 HUD Tracking Pilot Wilson Configuration I -80 - Run B83
2013-01-01
Background The aim of the present study was to evaluate the physicochemical and antioxidant properties of Malaysian monofloral honey samples—acacia, pineapple and borneo honey—and compare them with tualang honey. Acacia and pineapple honey are produced by Apis mellifera bees while borneo and tualang honey are produced by Apis cerana and Apis dorsata bees, respectively. Methods The physical parameters of honey, such as pH, moisture content, electrical conductivity (EC), total dissolved solids (TDS), color intensity, total sugar and apparent sucrose content, were measured. Hydroxymethylfurfural (HMF) was measured using high performance liquid chromatography, and a number of biochemical and antioxidant tests were performed to determine the antioxidant properties of the honey samples. Results Acacia honey was the most acidic (pH 3.53), whereas pineapple honey had the lowest moisture content (14.86%), indicating that both types of honey can resist microbial spoilage more effectively when compared to tualang honey (pH 3.80 and 17.53% moisture content). Acacia honey contained the highest EC (0.76 mS/cm), whereas borneo honey had the highest (377 ppm) TDS. The mean HMF content in Malaysian honey was 35.98 mg/kg. Tualang honey, which is amber color, had the highest color intensity (544.33 mAU). Acacia honey is the sweetest, and contained the highest concentration of total sugar, reducing sugar and apparent sucrose. Tualang honey had the highest concentration of phenolic compounds (352.73 ± 0.81 mg galic acid/kg), flavonoids (65.65 ± 0.74 mg catechin/kg), DPPH (59.89%), FRAP values (576.91 ± 0.64 μM Fe (II)/100 g) and protein content (4.83 ± 0.02 g/kg) as well as the lowest AEAC values (244.10 ± 5.24 mg/kg), indicating its strong antioxidant properties. Proline, an important amino acid that is present in honey was also measured in the present study and it was found at the highest concentration in pineapple honey. Several strong correlations were found among the biochemical and antioxidant parameters of all the Malaysian honeys. Conclusion Although Malaysian honeys are of good quality, tualang honey contains the strongest antioxidant properties by far. PMID:23433009
Mass Balance Analysis of Contaminated Heparin Product
Liu, Zhenling; Xiao, Zhongping; Masuko, Sayaka; Zhao, Wenjing; Sterner, Eric; Bansal, Vinod; Fareed, Jawed; Dordick, Jonathan; Zhang, Fuming; Linhardt, Robert J.
2011-01-01
A quantitative analysis of a recalled contaminated lot of heparin (HP) sodium injection United States Pharmacopeial (USP) was undertaken in response to the controversy regarding the exact nature of the contaminant involved in the HP crisis. A mass balance analysis of the formulated drug product was performed. After freeze-drying, a 1 ml vial for injection afforded 54.8 ± 0.3 mg of dry solids. The excipients, sodium chloride and residual benzyl alcohol, accounted for 11.4 ± 0.5 mg and 0.9 ± 0.5 mg, respectively. Active pharmaceutical ingredient (API) represented 41.5 ± 1.0 mg, corresponding to 75.7 wt% of dry mass. Exhaustive treatment of API with specific enzymes, heparin lyases and/or chondroitin lyases was used to close mass balance. HP represented 30.5 ± 0.5 mg, corresponding to 73.5 wt% of the API. Dermatan sulfate (DS) impurity represented 1.7 ± 0.3 mg, corresponding to 4.1 wt% of the API. Contaminant, 9.3 ± 0.1 mg corresponding to 22.4 wt% of API, was found in the contaminated formulated drug product. The recovery of contaminant was close to quantitative (95.6-100 wt%). A single contaminant was unambiguously identified as oversulfated chondroitin sulfate (OSCS). PMID:20850409
Artificial intelligence modeling of cadmium(II) biosorption using rice straw
NASA Astrophysics Data System (ADS)
Nasr, Mahmoud; Mahmoud, Alaa El Din; Fawzy, Manal; Radwan, Ahmed
2017-05-01
The biosorption efficiency of Cd2+ using rice straw was investigated at room temperature (25 ± 4 °C), contact time (2 h) and agitation rate (5 Hz). Experiments studied the effect of three factors, biosorbent dose BD (0.1 and 0.5 g/L), pH (2 and 7) and initial Cd2+ concentration X (10 and 100 mg/L) at two levels "low" and "high". Results showed that, a variation in X from high to low revealed 31 % increase in the Cd2+ biosorption. However, a discrepancy in pH and BD from low to high achieved 28.60 and 23.61 % increase in the removal of Cd2+, respectively. From 23 factorial design, the effects of BD, pH and X achieved p value equals to 0.2248, 0.1881 and 0.1742, respectively, indicating that the influences are in the order X > pH > BD. Similarly, an adaptive neuro-fuzzy inference system indicated that X is the most influential with training and checking errors of 10.87 and 17.94, respectively. This trend was followed by "pH" with training error (15.80) and checking error (17.39), after that BD with training error (16.09) and checking error (16.29). A feed-forward back-propagation neural network with a configuration 3-6-1 achieved correlation ( R) of 0.99 (training), 0.82 (validation) and 0.97 (testing). Thus, the proposed network is capable of predicting Cd2+ biosorption with high accuracy, while the most significant variable was X.
NASA Astrophysics Data System (ADS)
Ohaeri, Enyinnaya; Omale, Joseph; Eduok, Ubong; Szpunar, Jerzy
2018-04-01
This work presents the electrochemical response of X70 pipeline steel substrates thermomechanically processed at different conditions. The WE sample was hot rolled at a temperature range of 850 °C to 805 °C and cooled at a rate of 42.75 °C/s. Another sample WD was hot rolled from 880 °C to 815 °C and cooled at a faster rate of 51.5 °C/s. Corrosion tests were conducted electrochemically by potentiodynamic polarization in hydrogen-charged and non-hydrogen-charged environments. A lower corrosion rate was measured with hydrogen charging due to the rapid formation of corrosion product film on pipeline substrate, but WE specimen emerged as the most susceptible to corrosion with and without hydrogen charging. Variations in thermomechanical rolling conditions influenced grain orientation, protective film properties, corrosion, and cracking behavior on both specimens. Cracks were seen in both specimens after hydrogen charging, but specimen WE experienced a more intense deterioration of protective corrosion product film and subsequent cracking. A large part of specimen WD retained its protective corrosion product film after the polarization test, and sites where spalling occurred resulted in pitting with less cracking. Despite weak crystallographic texture noticed in both specimens, WD showed a higher intensity of corrosion-resistant 111||ND-oriented grains, while WE showed a more random distribution of 111||ND-, 011||ND-, and 001||ND-oriented grains with a lower intensity.
NASA Astrophysics Data System (ADS)
Ohaeri, Enyinnaya; Omale, Joseph; Eduok, Ubong; Szpunar, Jerzy
2018-06-01
This work presents the electrochemical response of X70 pipeline steel substrates thermomechanically processed at different conditions. The WE sample was hot rolled at a temperature range of 850 °C to 805 °C and cooled at a rate of 42.75 °C/s. Another sample WD was hot rolled from 880 °C to 815 °C and cooled at a faster rate of 51.5 °C/s. Corrosion tests were conducted electrochemically by potentiodynamic polarization in hydrogen-charged and non-hydrogen-charged environments. A lower corrosion rate was measured with hydrogen charging due to the rapid formation of corrosion product film on pipeline substrate, but WE specimen emerged as the most susceptible to corrosion with and without hydrogen charging. Variations in thermomechanical rolling conditions influenced grain orientation, protective film properties, corrosion, and cracking behavior on both specimens. Cracks were seen in both specimens after hydrogen charging, but specimen WE experienced a more intense deterioration of protective corrosion product film and subsequent cracking. A large part of specimen WD retained its protective corrosion product film after the polarization test, and sites where spalling occurred resulted in pitting with less cracking. Despite weak crystallographic texture noticed in both specimens, WD showed a higher intensity of corrosion-resistant 111|| ND-oriented grains, while WE showed a more random distribution of 111|| ND-, 011|| ND-, and 001|| ND-oriented grains with a lower intensity.
NASA Astrophysics Data System (ADS)
Wu, Ying; Hurley, John P.; Ji, Qing; Kwan, Joe; Leung, Ka-Ngo
2009-03-01
We present recent work on a prototype compact neutron generator for associated particle imaging (API). API uses alpha particles that are produced simultaneously with neutrons in the deuterium-tritium (2D(3T,n)4α) fusion reaction to determine the direction of the neutrons upon exiting the reaction. This method determines the spatial position of each neutron interaction and requires the neutrons to be generated from a small spot in order to achieve high spatial resolution. The ion source for API is designed to produce a focused ion beam with a beam spot diameter of 1-mm or less on the target. We use an axial type neutron generator with a predicted neutron yield of 108 n/s for a 50 μA D/T ion beam current accelerated to 80 kV. The generator utilizes an RF planar spiral antenna at 13.56 MHz to create a highly efficient inductively coupled plasma at the ion source. Experimental results show that beams with an atomic ion fraction of over 80% can be obtained while utilizing only 100 watts of RF power in the ion source. A single acceleration gap with a secondary electron suppression electrode is used in the tube. Experimental results from ion source testing, such as the current density, atomic ion fraction, electron temperature, and electron density will be discussed.
Vilar, Vítor J P; Botelho, Cidália M S; Boaventura, Rui A R
2007-11-19
Biosorption of chromium and zinc ions by an industrial algal waste, from agar extraction industry has been studied in a batch system. This biosorbent was compared with the algae Gelidium itself, which is the raw material for agar extraction, and the industrial waste immobilized with polyacrylonitrile (composite material). Langmuir and Langmuir-Freundlich equilibrium models describe well the equilibrium data. The parameters of Langmuir equilibrium model at pH 5.3 and 20 degrees C were for the algae, q(L)=18 mg Cr(III)g(-1) and 13 mgZn(II)g(-1), K(L) = 0.021l mg(-1)Cr(III) and 0.026l mg(-1) Zn(II); for the algal waste, q(L)=12 mgCr(III)g(-1) and 7mgZn(II)g(-1), K(L)=0.033lmg(-1) Cr(III) and 0.042l mg(-1) Zn(II); for the composite material, q(L) = 9 mgCr(III)g(-1) and 6 mgZn(II)g(-1), K(L)=0.032l mg(-1)Cr(III) and 0.034l mg(-1)Zn(II). The biosorbents exhibited a higher preference for Cr(III) ions and algae Gelidium is the best one. The pseudo-first-order Lagergren and pseudo-second-order models fitted well the kinetic data for the two metal ions. Kinetic constants and equilibrium uptake concentrations given by the pseudo-second-order model for an initial Cr(III) and Zn(II) concentration of approximately 100 mgl(-1), at pH 5.3 and 20 degrees C were k(2,ads)=0.04 g mg(-1)Cr(III)min(-1) and 0.07 g mg(-1)Zn(II)min(-1), q(eq)=11.9 mgCr(III)g(-1) and 9.5 mgZn(II)g(-1) for algae; k(2,ads)=0.17 g mg(-1)Cr(III)min(-1) and 0.19 g mg(-1)Zn(II)min(-1), q(eq)=8.3 mgCr(III)g(-1) and 5.6 mgZn(II)g(-1) for algal waste; k(2,ads)=0.01 g mg(-1)Cr(III)min(-1) and 0.18 g mg(-1)Zn(II)min(-1), q(eq)=8.0 mgCr(III)g(-1) and 4.4 mgZn(II)g(-1) for composite material. Biosorption was modelled using a batch adsorber mass transfer kinetic model, which successfully predicts Cr(III) and Zn(II) concentration profiles. The calculated average homogeneous diffusivities, D(h), were 4.2 x 10(-8), 8.3 x 10(-8) and 1.4 x 10(-8)cm(2)s(-1) for Cr(III) and 4.8 x 10(-8), 9.7 x 10(-8) and 6.2 x 10(-8)cm(2)s(-1) for Zn(II), respectively, for Gelidium, algal waste and composite material. The algal waste has the lower intraparticle resistance.
Lee, Yung-Chi; Dalton, Chad; Regler, Brian; Harris, David
2018-06-06
Lipid-based drug delivery systems have been intensively investigated as a means of delivering poorly water-soluble drugs. Upon ingestion, the lipases in the gastrointestinal tract digest lipid ingredients, mainly triglycerides, within the formulation into monoglycerides and fatty acids. While numerous studies have addressed the solubility of drugs in triglycerides, comparatively few publications have addressed the solubility of drugs in fatty acids, which are the end product of digestion and responsible for the solubility of drug within mixed micelles. The objective of this investigation was to explore the solubility of a poorly water-soluble drug in fatty acids and raise the awareness of the importance of drug solubility in fatty acids. The model API (active pharmaceutical ingredient), a weak acid, is considered a BCS II compound with an aqueous solubility of 0.02 μg/mL and predicted partition coefficient >7. The solubility of API ranged from 120 mg/mL to over 1 g/mL in fatty acids with chain lengths across the range C18 to C6. Hydrogen bonding was found to be the main driver of the solubilization of API in fatty acids. The solubility of API was significantly reduced by water uptake in caprylic acid but not in oleic acid. This report demonstrates that solubility data generated in fatty acids can provide an indication of the solubility of the drug after lipid digestion. This report also highlights the importance of measuring the solubility of drugs in fatty acids in the course of lipid formulation development.
Energy Transfer between Post-Transition Elements & Rare Earths in Oxide & Chalcogenide Glasses.
1979-08-27
Caird [13]. A calculation of reduced matrix elements of Pr3 in 20 Na O • 80 TeO2 glass [14] showed that they differ slightly from data of ref. [121... glasses Transition (lass 35 ZnO 65 TeO2 20 Na2 O 80 TeO 2 fX 106 fX 106 l.,eas 3a, a) Ia’l. faI f.me.s f al f+ I fal 3 H4 - 3 H6 1.56 1.65 1.12...Rare-Earth Doped Glasses 20. jIST HAEV CCnFn~m ,i cn,on ra e sideit If c."*Ar’ -- ~ 14-r by t?-h.c .: r Intensity parameters, radiative transition
Microphysical Properties of Fog at Otis Air Force Base.
1982-01-26
BKN 60VC 5 F SP1 2133 M3 OVC 3 F 2 0 SAI 2155 w2X 2 F 70170 21 08’ SAi 22551 wix I F in _ _ SP 2320 WIX 1/2 L-F21 0 SA; 23551 WIX 1/2 L F 6916 1 1 1...SAI 00551 WIX 1/2 L-F 699 21 - 0511/2 L-F 6 i8 IM 1__20_____10 SA, 5 5 WX 1/2 - F o3sI 2w-x -SA I 0455, WlX 1/2 F r7 r’ _2In SP 10535 i WIX 1/4 _ F...20 - 1. S~l_555 WiXI~114 _ F 166166 f SA!O5 WIX .L -i 1/4L r___ RS SP 1 07 4 0! --X - F 1 1 I_ US SP 0755, -X ES SKN F FiR 264 0 . SP 0815 -X 5SCT
Bostijn, N; Hellings, M; Van Der Veen, M; Vervaet, C; De Beer, T
2018-07-12
UltraViolet (UV) spectroscopy was evaluated as an innovative Process Analytical Technology (PAT) - tool for the in-line and real-time quantitative determination of low-dosed active pharmaceutical ingredients (APIs) in a semi-solid (gel) and a liquid (suspension) pharmaceutical formulation during their batch production process. The performance of this new PAT-tool (i.e., UV spectroscopy) was compared with an already more established PAT-method based on Raman spectroscopy. In-line UV measurements were carried out with an immersion probe while for the Raman measurements a non-contact PhAT probe was used. For both studied formulations, an in-line API quantification model was developed and validated per spectroscopic technique. The known API concentrations (Y) were correlated with the corresponding in-line collected preprocessed spectra (X) through a Partial Least Squares (PLS) regression. Each developed quantification method was validated by calculating the accuracy profile on the basis of the validation experiments. Furthermore, the measurement uncertainty was determined based on the data generated for the determination of the accuracy profiles. From the accuracy profile of the UV- and Raman-based quantification method for the gel, it was concluded that at the target API concentration of 2% (w/w), 95 out of 100 future routine measurements given by the Raman method will not deviate more than 10% (relative error) from the true API concentration, whereas for the UV method the acceptance limits of 10% were exceeded. For the liquid formulation, the Raman method was not able to quantify the API in the low-dosed suspension (0.09% (w/w) API). In contrast, the in-line UV method was able to adequately quantify the API in the suspension. This study demonstrated that UV spectroscopy can be adopted as a novel in-line PAT-technique for low-dose quantification purposes in pharmaceutical processes. Important is that none of the two spectroscopic techniques was superior to the other for both formulations: the Raman method was more accurate in quantifying the API in the gel (2% (w/w) API), while the UV method performed better for API quantification in the suspension (0.09% (w/w) API). Copyright © 2018 Elsevier B.V. All rights reserved.
Biochemical Differences Between Official and Simulated Mixed Martial Arts (MMA) Matches
Silveira Coswig, Victor; Hideyoshi Fukuda, David; de Paula Ramos, Solange; Boscolo Del Vecchio, Fabricio
2016-01-01
Background One of the goals for training in combat sports is to mimic real situations. For mixed martial arts (MMA), simulated sparring matches are a frequent component during training, but a there is a lack of knowledge considering the differences in sparring and competitive environments. Objectives The main objective of this study was to compare biochemical responses to sparring and official MMA matches. Materials and Methods Twenty five male professional MMA fighters were evaluated during official events (OFF = 12) and simulated matches (SIM = 13). For both situations, blood samples were taken before (PRE) and immediately after (POST) matches. For statistical analysis, two-way analysis of variance (time x group and time x winner) were used to compare the dependent parametric variables. For non-parametric data, the Kruskal-Wallis test was used and differences were confirmed by Mann-Whitney tests. Results No significant differences were observed among the groups for demographic variables. The athletes were 26.5 ± 5 years with 80 ± 10 kg, 1.74 ± 0.05 m and had 39.4 ± 25 months of training experience. Primary results indicated higher blood glucose concentration prior to fights for OFF group (OFF= 6.1 ± 1.2 mmol/L and SIM= 4.4 ± 0.7 mmol/L; P < 0.01) and higher ALT values for OFF group at both time points (OFF: PRE = 41.2 ± 12 U/L, POST = 44.2 ± 14.1 U/L; SIM: PRE = 28.1 ± 13.8 U/L, POST = 30.5 ± 12.5 U/L; P = 0.001). In addition, the blood lactate showed similar responses for both groups (OFF: PRE= 4 [3.4 - 4.4] mmol/L, POST= 16.9 [13.8 - 23.5] mmol/L; SIM: PRE = 3.8 [2.8 - 5.5] mmol/L, POST= 16.8 [12.3 - 19.2] mmol/L; P < 0.001). Conclusions In conclusion, MMA official and simulated matches induce similar high intensity glycolytic demands and minimal changes to biochemical markers of muscle damage immediately following the fights. Glycolytic availability prior to the fights was raised exclusively in response to official matches. PMID:27625756
Biochemical Differences Between Official and Simulated Mixed Martial Arts (MMA) Matches.
Silveira Coswig, Victor; Hideyoshi Fukuda, David; de Paula Ramos, Solange; Boscolo Del Vecchio, Fabricio
2016-06-01
One of the goals for training in combat sports is to mimic real situations. For mixed martial arts (MMA), simulated sparring matches are a frequent component during training, but a there is a lack of knowledge considering the differences in sparring and competitive environments. The main objective of this study was to compare biochemical responses to sparring and official MMA matches. Twenty five male professional MMA fighters were evaluated during official events (OFF = 12) and simulated matches (SIM = 13). For both situations, blood samples were taken before (PRE) and immediately after (POST) matches. For statistical analysis, two-way analysis of variance (time x group and time x winner) were used to compare the dependent parametric variables. For non-parametric data, the Kruskal-Wallis test was used and differences were confirmed by Mann-Whitney tests. No significant differences were observed among the groups for demographic variables. The athletes were 26.5 ± 5 years with 80 ± 10 kg, 1.74 ± 0.05 m and had 39.4 ± 25 months of training experience. Primary results indicated higher blood glucose concentration prior to fights for OFF group (OFF= 6.1 ± 1.2 mmol/L and SIM= 4.4 ± 0.7 mmol/L; P < 0.01) and higher ALT values for OFF group at both time points (OFF: PRE = 41.2 ± 12 U/L, POST = 44.2 ± 14.1 U/L; SIM: PRE = 28.1 ± 13.8 U/L, POST = 30.5 ± 12.5 U/L; P = 0.001). In addition, the blood lactate showed similar responses for both groups (OFF: PRE= 4 [3.4 - 4.4] mmol/L, POST= 16.9 [13.8 - 23.5] mmol/L; SIM: PRE = 3.8 [2.8 - 5.5] mmol/L, POST= 16.8 [12.3 - 19.2] mmol/L; P < 0.001). In conclusion, MMA official and simulated matches induce similar high intensity glycolytic demands and minimal changes to biochemical markers of muscle damage immediately following the fights. Glycolytic availability prior to the fights was raised exclusively in response to official matches.
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2013 CFR
2013-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2012 CFR
2012-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
49 CFR 195.307 - Pressure testing aboveground breakout tanks.
Code of Federal Regulations, 2014 CFR
2014-10-01
... aboveground breakout tanks. (a) For aboveground breakout tanks built into API Specification 12F and first placed in service after October 2, 2000, pneumatic testing must be in accordance with section 5.3 of API Specification 12 F (incorporated by reference, see § 195.3). (b) For aboveground breakout tanks built to API...
Data Association Algorithms for Tracking Satellites
2008-02-05
series of (I) about the current estimate: x{k — l|fc — 1) x-(fc) = f[k, x{k - l\\k - 1)] + fx {k - l)[x{k - 1) - x{k - l\\k - 1)] + l/2^el[x(fc - 1) - x(A...l|ik - 1)]’ i=l ■ fxx{k - l)[x{k - 1) - x{k - l\\k - 1)] + higher-order terms + v(k - 1) (5) where e; is the ith Cartesian basis vector and fx ...34x x{k\\k - 1) = fx {k - l)x(fc - l|fc - 1) + l/2^e!;[x /(fc - l|fc - l)/^{fc - l)x(fc - l|fc - 1) t=l - TvifUk - l)P{k - l\\k - I)
Yang, Juan; Wang, Lijuan; Guo, Qiaoling; Yang, Gengliang
2012-03-01
A reversed-phase high performance liquid chromatographic (HPLC) method using the di-n-hexyl L-tartrate-boric acid complex as a chiral mobile phase additive was developed for the enantioseparation of five beta-blockers including propranolol, esmolol, metoprolol, bisoprolol and sotalol. In order to obtain a better enantioseparation, the influences of concentrations of di-n-butyl L-tartrate and boric acid, the type, concentration and pH of the buffer, methanol content as well as the molecular structure of analytes were extensively investigated. The separation of the analytes was performed on a Venusil MP-C18 column (250 mm x 4.6 mm, 5 microm). The mobile phase was 15 mmol/L ammonium acetate-methanol containing 60 mmol/L boric acid, 70 mmol/L di-n-hexyl L-tartrate (pH 6.00). The volume ratios of 15 mmol/L ammonium acetate to methanol were 20: 80 for propranolol, esmolol, metoprolol, bisoprolol and 30: 70 for sotalol. The flow rate was 0.5 mL/min and the detection wavelength was set at 214 nm. Under the optimized conditions, baseline enantioseparation was obtained separately for the five pairs of analytes.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goel, S.; Pandey, U.K.; Pandey, O.P.
1988-05-01
Reactions of neodymium trichloride and samarium trichloride with 6,7,13,14-R/sub 4/ - 3,10-X/sub 2/-(14)-5,7,12,14-tetraene-1,5,8,12-N/sub 4/-(2,4,9,11-N/sub 4/) (R = CH/sub 3/, X = 0 (L/sub 1//sup (1)/); R = C/sub 6/H/sub 5/, X = O (L/sub 1//sup (2)/); R = CH/sub 3/, X = S(L/sub 2//sup (1)/)) and R = C/sub 6/H/sub 5/, X = S(/sub 2//sup (2)/)) have been studied in ethanol and complexes of the type (M(L/sub 1//sup (1)/ or L/sub 1//sup (2)/))Cl/sub 3/ and (M(L/sub 2//sup (1)/ or L/sub 2//sup (2)/)(H/sub 2/O)/sub 2/)Cl/sub 3/ (M = Nd(III) and Sm(III)) have been isolated. In addition, macrocyclic complexes of Nd(III) andmore » Sm(III) with another series of tetraaza ligands, viz, 5,6,11,12-R/sub 4/-3,8-X/sub 2/-(12)-4,6,10,12-tetraene-1,4,7,10-N/sub 4/-(2,9-N/sub 2/) (R = CH/sub 3/, X = O (L/sub 3//sup (1)/); R = C/sub 6/H/sub 5/, X = O(L/sub 3//sup (2)/); R = CH/sub 3/, X = S(L/sub 4//sup (1)/); R = C/sub 6/H/sub 5/, X = S(L/sub 4//sup (2)/)), formulated as (M(L/sub 3//sup (1)/, L/sub 3//sup (2)/, L/sub 4//sup (1)/ or L/sub 4//sup (2)/)(H/sub 2/O)/sub 2/)Cl/sub 3/ (M = Nd(III) and Sm(III)) have been prepared by template condensation of Nd(III) and Sm(III) complexes of diacetylbis(semicarbazonethiosemicarbazone) or benzilibis(semicarbazonethiosemicarbazone) with diacetyl or benzil. The complexes have been identified by elemental analysis, electrical conductance, spectral and thermal measurements.« less
Pu, Wenchen; Li, Jiao; Zheng, Yuanyuan; Shen, Xianyan; Fan, Xin; Zhou, Jian-Kang; He, Juan; Deng, Yulan; Liu, Xuesha; Wang, Chun; Yang, Shengyong; Chen, Qiang; Liu, Lunxu; Zhang, Guolin; Wei, Yu-Quan; Peng, Yong
2018-01-30
Hepatocellular carcinoma (HCC) is a leading cause of cancer death worldwide, but there are few effective treatments. Aberrant microRNA (miRNA) biogenesis is correlated with HCC development. We previously demonstrated that peptidyl-prolyl cis-trans isomerase NIMA-interacting 1 (Pin1) participates in miRNA biogenesis and is a potential HCC treatment target. However, how Pin1 modulates miRNA biogenesis remains obscure. Here, we present in vivo evidence that Pin1 overexpression is directly linked to the development of HCC. Administration with the Pin1 inhibitor (API-1), a specific small molecule targeting Pin1 peptidyl-prolyl isomerase domain and inhibiting Pin1 cis-trans isomerizing activity, suppresses in vitro cell proliferation and migration of HCC cells. But API-1-induced Pin1 inhibition is insensitive to HCC cells with low Pin1 expression and/or low exportin-5 (XPO5) phosphorylation. Mechanistically, Pin1 recognizes and isomerizes the phosphorylated serine-proline motif of phosphorylated XPO5 and passivates phosphorylated XPO5. Pin1 inhibition by API-1 maintains the active conformation of phosphorylated XPO5 and restores XPO5-driven precursor miRNA nuclear-to-cytoplasm export, activating anticancer miRNA biogenesis and leading to both in vitro HCC suppression and HCC suppression in xenograft mice. Experimental evidence suggests that Pin1 inhibition by API-1 up-regulates miRNA biogenesis by retaining active XPO5 conformation and suppresses HCC development, revealing the mechanism of Pin1-mediated miRNA biogenesis and unequivocally supporting API-1 as a drug candidate for HCC therapy, especially for Pin1-overexpressing, extracellular signal-regulated kinase-activated HCC. (Hepatology 2018). © 2018 by the American Association for the Study of Liver Diseases.
Wu, Xia; Yang, Jing He; Sun, Shuna; Guo, Changying; Ran, Dehuan; Zheng, Jinhua
2006-01-01
Nucleic acids can quench resonance light scattering (RLS) intensity of the Y(III)-1,6-bi(1'-phenyl-3'-methyl-5'-pyrazolone-4'-)hexane-dione(BPMPHD) complex in the pH range 5.0-5.8. Under optimal conditions, there are linear relationships between the quenching of RLS and the concentration of nucleic acids in the range 6.3 x 10(-8)-2.1 x 10(-5) g/mL for fish sperm DNA (fsDNA), 1.2 x 10(-8)-5.0 x 10(-5) g/mL for calf thymus DNA (ctDNA) and 6.0 x 10(-8)-2.0 x 10(-5) g/mL for yeast RNA (yRNA). The detection limits (3 s) of fsDNA, ctDNA and yRNA are 0.7 ng/mL, 3.8 ng/mL and 4.2 ng/mL, respectively. Copyright (c) 2006 John Wiley & Sons, Ltd.
Maher, Hadir M; Alzoman, Nourah Z; Shehata, Shereen M; Abahussain, Ashwag O
2017-04-15
Neratinib (NER) and pelitinib (PEL) are irreversible tyrosine kinase inhibitors (TKIs) that have been recently employed in cancer treatment. Apigenin (API), among other flavonoids, is known to have antioxidant, anti-proliferative, and carcinogenic effect. API can potentiate the antitumor effect of chemotherapeutic agents and/or alleviate the side effects of many anticancer agents. Since TKIs are mostly metabolized by CYP3A4 enzymes and that API could alter the enzymatic activity, potential drug interactions could be expected following their co-aministration. In the present study, a bioanalytical UPLC-MS/MS method has been developed and validated for the quantification of NER and PEL in rat plasma, using domperidone (DOM) as an internal standard. Sample preparation was carried out using solid phase extraction (SPE) with C18 cartridges with good extraction recovery of not less than 92.42% (NER) and 89.73% (PEL). Chromatographic analysis was performed on a Waters BEH C18 column with a mobile phase composed of acetonitrile and water, (70:30, v/v), each with 0.1% formic acid. Quantitation was performed using multiple reaction monitoring (MRM) of the transitions from protonated precursor ions [M+H] + , at m/z 557.30 (NER), m/z 468.21 (PEL), and at m/z 426.27 (DOM), to selected product ions at m/z 112.05 (NER), m/z 395.22 (PEL), and at m/z 175.18 (DOM). The method was fully validated as per the FDA guidelines over the concentration range of 0.5-200ng/mL with very low lower limit of quantification (LLOQ) of 0.5ng/mL for both NER and PEL. The intra- and inter-day assay precision and accuracy were evaluated for both drugs and the calculated values of percentage relative standards deviations (%RSD) and relative errors (%E r ) were within the acceptable limits (<15%) for concentrations other than LLOQ and 20% for LLOQ. The applicability of the method was extended to study the possibility of drug interactions following the oral co-administration of NER/PEL with API. Thus, this study could be readily applied in therapeutic drug monitoring (TDM) of cancerous patients receiving such drug combinations. Copyright © 2017 Elsevier B.V. All rights reserved.
Cold Test and Performance Evaluation of Prototype Cryoline-X
NASA Astrophysics Data System (ADS)
Shah, N.; Choukekar, K.; Kapoor, H.; Muralidhara, S.; Garg, A.; Kumar, U.; Jadon, M.; Dash, B.; Bhattachrya, R.; Badgujar, S.; Billot, V.; Bravais, P.; Cadeau, P.
2017-12-01
The multi-process pipe vacuum jacketed cryolines for the ITER project are probably world’s most complex cryolines in terms of layout, load cases, quality, safety and regulatory requirements. As a risk mitigation plan, design, manufacturing and testing of prototype cryoline (PTCL) was planned before the approval of final design of ITER cryolines. The 29 meter long PTCL consist of 6 process pipes encased by thermal shield inside Outer Vacuum Jacket of DN 600 size and carries cold helium at 4.5 K and 80 K. The global heat load limit was defined as 1.2 W/m at 4.5 K and 4.5 W/m at 80 K. The PTCL-X (PTCL for Group-X cryolines) was specified in detail by ITER-India and designed as well as manufactured by Air Liquide. PTCL-X was installed and tested at cryogenic temperature at ITER-India Cryogenic Laboratory in 2016. The heat load at 4.5 K and 80 K, estimated using enthalpy difference method, was found to be approximately 0.8 W/m at 4.5 K, 4.2 W/m at 80 K, which is well within the defined limits. Thermal shield temperature profile was also found to be satisfactory. Paper summarizes the cold test results of PTCL-X
Rizwanullah, Md; Amin, Saima; Ahmad, Javed
2017-01-01
In the present study, rosuvastatin calcium-loaded nanostructured lipid carriers were developed and optimized for improved efficacy. The ROS-Ca-loaded NLC was prepared using melt emulsification ultrasonication technique and optimized by Box-Behnken statistical design. The optimized NLC composed of glyceryl monostearate (solid lipid) and capmul MCM EP (liquid lipid) as lipid phase (3% w/v), poloxamer 188 (1%) and tween 80 (1%) as surfactant. The mean particle size, polydispersity index (PDI), zeta potential (ζ) and entrapment efficiency (%) of optimized NLC formulation was observed to be 150.3 ± 4.67 nm, 0.175 ± 0.022, -32.9 ± 1.36 mV and 84.95 ± 5.63%, respectively. NLC formulation showed better in vitro release in simulated intestinal fluid (pH 6.8) than API suspension. Confocal laser scanning showed deeper permeation of formulation across rat intestine compared to rhodamine B dye solution. Pharmacokinetic study on female albino Wistar rats showed 5.4-fold increase in relative bioavailability with NLC compared to API suspension. Optimized NLC formulation also showed significant (p < 0.01) lipid lowering effect in hyperlipidemic rats. Therefore, NLC represents a great potential for improved efficacy of ROS-Ca after oral administration.
Xie, Yifeng; Wang, Quansheng; Liu, Jianguo; Xie, Jiwen; Xue, Kaming; Tang, Qing
2010-08-01
To investigate the effect of dracorhodin perchlorate (DP) on inhibiting high glucose-induced serum and glucocorticoid induced protein kinase 1 (SGK1) and fibronectin (FN) expression in human mesangial cells (HMC), and its mechanism of prevention and treatment on renal fibrosis in diabetic nephropathy (DN) . The HMC were divided into normal glucose group (NG group, 5.5 mmol x L(-1) D-glucose), normal glucose +low DP group (NG + LDP group, 5.5 mmol x L(-1) D-glucose +7.5 micromol x L(-1) DP), normal glucose +high DP group (NG + HDP group, 5.5 mmol x L(-1) D-glucose + 15 micromol x L(-1) DP), high glucose group (HG group,25 mmol x L(-1) D-glucose), high glucose +low DP group (HG + LDP group, 25 mmol x L(-1) D-glucose + 7.5 micromol x L(-1) DP)and high glucose +high DP group (HG +HDP group, 25 mmol x L(-1) D-glucose + 15 micromol x L(-1) DP). Each group was examined at 24 hours. The levels of SGK1 and FN mRNA was detected by real-time fluorescence quantitative PCR,and the expression of SGK1 and FN protein was detected by Western blot or indirect immunofluorescence. A basal level of SGK1 and FN in HMC were detected in NG group, and the level of SGK1 and FN mRNA and protein were not evidently different compared to that of NG group adding 7.5 micromol x L(-1) DP for 24 hours. On the other hand, the levels of SGK1 and FN mRNA and protein were obviously decreased by adding 15 micromol x L(-1) DP for 24 hours. Compared to NG group, the levels of SGK1 and FN mRNA and protein were increased in HG group after stimulating for 24 hours (P < 0.01). Compared to HG group, the level of SGK1 and FN mRNA and protein were evidently reduced in HG + LDP and HG + HDP groups by adding 7.5 micromol x L(-1) DP and 15 micromol x L(-1) DP for 24 hours (P < 0.01). Dracorhodin perchlorate can inhibit high glucose-induced serum and glucocorticoid induced protein kinase 1 (SGK1) and fibronectin(FN) expression in human mesangial cells, and this may be part of the mechanism of preventing and treating renal fibrosis of DN.
Babu, N Jagadeesh; Reddy, L Sreenivas; Nangia, Ashwini
2007-01-01
The carboxamide-pyridine N-oxide heterosynthon is sustained by syn(amide)N-H...O-(oxide) hydrogen bond and auxiliary (N-oxide)C-H...O(amide) interaction (Reddy, L. S.; Babu, N. J.; Nangia, A. Chem. Commun. 2006, 1369). We evaluate the scope and utility of this heterosynthon in amide-containing molecules and drugs (active pharmaceutical ingredients, APIs) with pyridine N-oxide cocrystal former molecules (CCFs). Out of 10 cocrystals in this study and 7 complexes from previous work, amide-N-oxide heterosynthon is present in 12 structures and amide dimer homosynthon occurs in 5 structures. The amide dimer is favored over amide-N-oxide synthon in cocrystals when there is competition from another H-bonding functional group, e.g., 4-hydroxybenzamide, or because of steric factors, as in carbamazepine API. The molecular organization in carbamazepine.quinoxaline N,N'-dioxide 1:1 cocrystal structure is directed by amide homodimer and anti(amide)N-H...O-(oxide) hydrogen bond. Its X-ray crystal structure matches with the third lowest energy frame calculated in Polymorph Predictor (Cerius(2), COMPASS force field). Apart from generating new and diverse supramolecular structures, hydration is controlled in one substance. 4-Picoline N-oxide deliquesces within a day, but its cocrystal with barbital does not absorb moisture at 50% RH and 30 degrees C up to four weeks. Amide-N-oxide heterosynthon has potential utility in both amide and N-oxide type drug molecules with complementary CCFs. Its occurrence probability in the Cambridge Structural Database is 87% among 27 structures without competing acceptors and 78% in 41 structures containing OH, NH, H(2)O functional groups.
OSCAR API for Real-Time Low-Power Multicores and Its Performance on Multicores and SMP Servers
NASA Astrophysics Data System (ADS)
Kimura, Keiji; Mase, Masayoshi; Mikami, Hiroki; Miyamoto, Takamichi; Shirako, Jun; Kasahara, Hironori
OSCAR (Optimally Scheduled Advanced Multiprocessor) API has been designed for real-time embedded low-power multicores to generate parallel programs for various multicores from different vendors by using the OSCAR parallelizing compiler. The OSCAR API has been developed by Waseda University in collaboration with Fujitsu Laboratory, Hitachi, NEC, Panasonic, Renesas Technology, and Toshiba in an METI/NEDO project entitled "Multicore Technology for Realtime Consumer Electronics." By using the OSCAR API as an interface between the OSCAR compiler and backend compilers, the OSCAR compiler enables hierarchical multigrain parallel processing with memory optimization under capacity restriction for cache memory, local memory, distributed shared memory, and on-chip/off-chip shared memory; data transfer using a DMA controller; and power reduction control using DVFS (Dynamic Voltage and Frequency Scaling), clock gating, and power gating for various embedded multicores. In addition, a parallelized program automatically generated by the OSCAR compiler with OSCAR API can be compiled by the ordinary OpenMP compilers since the OSCAR API is designed on a subset of the OpenMP. This paper describes the OSCAR API and its compatibility with the OSCAR compiler by showing code examples. Performance evaluations of the OSCAR compiler and the OSCAR API are carried out using an IBM Power5+ workstation, an IBM Power6 high-end SMP server, and a newly developed consumer electronics multicore chip RP2 by Renesas, Hitachi and Waseda. From the results of scalability evaluation, it is found that on an average, the OSCAR compiler with the OSCAR API can exploit 5.8 times speedup over the sequential execution on the Power5+ workstation with eight cores and 2.9 times speedup on RP2 with four cores, respectively. In addition, the OSCAR compiler can accelerate an IBM XL Fortran compiler up to 3.3 times on the Power6 SMP server. Due to low-power optimization on RP2, the OSCAR compiler with the OSCAR API achieves a maximum power reduction of 84% in the real-time execution mode.
Kim, Seung Up; Jang, Hui Won; Cheong, Jae Youn; Kim, Ja Kyung; Lee, Myung Hee; Kim, Dong Joon; Yang, Jin Mo; Cho, Sung Won; Lee, Kwan Sik; Choi, Eun Hee; Park, Young Nyun; Han, Kwang-Hyub
2011-01-01
We investigated the accuracy of liver stiffness measurement (LSM) in chronic hepatitis C (CHC) in a multicenter, prospective study in South Korea. Between June 2005 and July 2009, 91 CHC patients without a previous history of antiviral treatment, clinical evidences of cirrhosis, coinfection with other viruses, and heavy alcohol consumption and with alanine aminotransferase (ALT) ≤5x upper limit of normal, total bilirubin ≤1.5 mg/dL, sufficient liver biopsy quality (≥15 mm and more than six portal tracts), interquartile range to median liver stiffness (LS) value ratio ≤0.21, and more than 10 valid measurements, were recruited. The Batts and Ludwig scoring system was used for histologic assessment. Age-platelet index (API), aspartate aminotransferase (AST)-to-platelet ratio index (APRI), and age-spleen-platelet ratio index (ASPRI) were calculated. Area under the receiver operating characteristic curve (AUROC) was used to evaluate the performance of LSM and other noninvasive models. The mean age was 47.9 years, and the mean LS value was 7.7 kPa (44 men and 47 women). LS value was highly correlated to the fibrosis stages (r=0.835, P<0.001). The AUROCs of LSM were 0.909 for ≥F2, 0.993 for ≥F3, and 0.970 for F=4 and were superior to those of API (0.72, 0.858, and 0.948, respectively), APRI (0.780, 0.887, and 0.904, respectively), and ASPRI (0.713, 0.862, and 0.957, respectively). The optimal cutoff LS values were 6.2 kPa for ≥F2, 7.7 kPa for ≥F3, and 11.0 kPa for F=4. Our data suggest that LSM can accurately assess liver fibrosis in patients with CHC and be applied in South Korea. © 2010 Journal of Gastroenterology and Hepatology Foundation and Blackwell Publishing Asia Pty Ltd.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kertesz, Z.I.
1961-10-31
Studies of the effect of gamma irradiation on four varieties of sweet cherries indicate an average radiation-induced softening threshold dosage of about 53 x lO/sup 3/ rad and about a 30% softening at the recommended 232 x lO/ sup 3/ rad "pasteurization dosage." No detrimental flavor or color changes and only slight and transient respiratory abnormalities were found. (auth) l667 At 75/sup o/F there was no eradication or arrestment of all fungi within fresh Michigan blueberries at any of the doses tested between 0.5 to 5 x 10/sup 5/ rads. After 28 days storage, all berries showed fungal growth inmore » nearly equal amounts to the non-irradiated controls regardless of the dose applied. When stored at 75/ sup o/F injury to the berries in the form of softening and produciion of abnormal red color in the flesh occurred at 5 x lO/sup 5/ and 3 x l0/sup 5/ rads after 16 days and only slightly at 2.5 x lO/sup 5/ rads after 28 days. In vitro inactivation of some blueberry decay pathogens was well below 5 x lO/sup 5/ rads. (auth)« less
Aquino, Italo S; Abramson, Charles I; Soares, Ademilson E E; Fernandes, Andrea Cardoso; Benbassat, Danny
2004-06-01
Experiments are reported on learning in virgin Africanized honey bee queens (Apis mellifera L.). Queens restrained in a "Pavlovian harness" received a pairing of hexanal odor with a 1.8-M feeding of sucrose solution. Compared to explicitly unpaired controls, acquisition was rapid in reaching about 90%. Acquisition was also rapid in queens receiving an unconditioned stimulus of "bee candy" or an unconditioned stimulus administered by worker bees. During extinction the conditioned response declines. The steepest decline was observed in queens receiving an unconditioned stimulus of bee candy. These findings extend previous work on learning of Afrianized honey bee workers to a population of queen bees.
DNA amount of X and B chromosomes in the grasshoppers Eyprepocnemis plorans and Locusta migratoria.
Ruiz-Ruano, F J; Ruiz-Estévez, M; Rodríguez-Pérez, J; López-Pino, J L; Cabrero, J; Camacho, J P M
2011-01-01
We analyzed the DNA amount in X and B chromosomes of 2 XX/X0 grasshopper species (Eyprepocnemis plorans and Locusta migratoria), by means of Feulgen image analysis densitometry (FIAD), using previous estimates in L. migratoria as standard (5.89 pg). We first analyzed spermatids of 0B males and found a bimodal distribution of integrated optical densities (IODs), suggesting that one peak corresponded to +X and the other to -X spermatids. The difference between the 2 peaks corresponded to the X chromosome DNA amount, which was 1.28 pg in E. plorans and 0.80 pg in L. migratoria. In addition, the +X peak in E. plorans gave an estimate of the C-value in this species (10.39 pg). We next analyzed diplotene cells from 1B males in E. plorans and +B males in L. migratoria (a species where Bs are mitotically unstable and no integer B number can be defined for an individual) and measured B chromosome IOD relative to X chromosome IOD, within the same cell, taking advantage of the similar degree of condensation for both positively heteropycnotic chromosomes at this meiotic stage. From this proportion, we estimated the DNA amount for 3 different B chromosome variants found in individuals from 3 E. plorans Spanish populations (0.54 pg for B1 from Saladares, 0.51 pg for B2 from Salobreña and 0.64 for B24 from Torrox). Likewise, we estimated the DNA amount of the B chromosome in L. migratoria to be 0.15 pg. To automate measurements, we wrote a GPL3 licensed Python program (pyFIA). We discuss the utility of the present approach for estimating X and B chromosome DNA amount in a variety of situations, and the meaning of the DNA amount estimates for X and B chromosomes in these 2 species. Copyright © 2011 S. Karger AG, Basel.
Verloes, R.; Atassi, G.; Dumont, P.; Kanarek, L.
1981-01-01
The experiments aimed at evaluating the optimal parameters in the chemo-immunotherapeutic treatment of the L1210 lymphoid leukaemia grafted to [female BALB/c (H2d) X male DBA/2 (H2d)]F1 hybrid mice, hereafter referred to as CDF1 mice. In vitro irradiation of leukaemic ascites cells by X- or gamma-rays and subsequent inoculation in mice showed that optimum immunogenicity is radiation dose-dependent. Grafting mice with 10(7) leukaemic ascites cells irradiated at optimum dose (80 GyX- or gamma-rays) delays mortality of the animals when challenged later with untreated L1210 cells, but is unable to cure mice. By contrast, specific immunoprophylaxis induced by Micrococcus, complement-triggering polysaccharides or BCG and irradiated leukaemic cells was able to protect mice against grafts of 10(4) L1210 cells. The i.p. route was notably superior to the i.v. route. When mice bearing advanced L1210 tumour were treated by chemotherapy (12 mg/kg of BCNU) on Day 6.5 after grafting 10(4) L1210 cells and subsequently treated by immunotherapy, a very high percentage (up to 90%) of mice with 10(8) leukaemic cells could be cured by repeated 1mg injections of bacterium or polysaccharide, and challenge with irradiated leukaemic cells was unnecessary. Because of the high cure rate obtained, the very regular response pattern and the non-pathogenicity, the bacterium Micrococcus lysodeikticus would seem a promising new candidate for chemo-immunotherapeutic antitumour strategies. PMID:7470382
Shielding properties of 80TeO2-5TiO2-(15-x) WO3-xAnOm glasses using WinXCom and MCNP5 code
NASA Astrophysics Data System (ADS)
Dong, M. G.; El-Mallawany, R.; Sayyed, M. I.; Tekin, H. O.
2017-12-01
Gamma ray shielding properties of 80TeO2-5TiO2-(15-x) WO3-xAnOm glasses, where AnOm is Nb2O5 = 0.01, 5, Nd2O3 = 3, 5 and Er2O3 = 5 mol% have been achieved. Shielding parameters; mass attenuation coefficients, half value layers, and macroscopic effective removal cross section for fast neutrons have been computed by using WinXCom program and MCNP5 Monte Carlo code. In addition, by using Geometric Progression method (G-P), exposure buildup factor values were also calculated. Variations of shielding parameters are discussed for the effect of REO addition into the glasses and photon energy.
Li, Bo; Ren, Hui; Yue, Ping; Chen, Mingwei; Khuri, Fadlo R.; Sun, Shi-Yong
2012-01-01
API-1 is a novel small molecule inhibitor of Akt, which acts by binding to Akt and preventing its membrane translocation, and has promising preclinical antitumor activity. In this study, we reveal a novel function of API-1 in regulation of c-FLIP levels and tumor necrosis factor-related apoptosis-inducing ligand (TRAIL)-induced apoptosis, independent of Akt inhibition. API-1 effectively induced apoptosis in tested cancer cell lines including activation of caspase-8 and caspase-9. It reduced the levels of c-FLIP without increasing the expression of DR4 or DR5. Accordingly, it synergized with TRAIL to induce apoptosis. Enforced expression of ectopic c-FLIP did not attenuate API-1-induced apoptosis, but inhibited its ability to enhance TRAIL-induced apoptosis. These data indicate that downregulation of c-FLIP mediates enhancement of TRAIL-induced apoptosis by API-1, but is not sufficient for API-1-induced apoptosis. API-1-induced reduction of c-FLIP could be blocked by the proteasome inhibitor MG132. Moreover, API-1 increased c-FLIP ubiquitination and decreased c-FLIP stability. These data together suggest that API-1 downregulates c-FLIP by facilitating its ubiquitination and proteasome-mediated degradation. Since other Akt inhibitors including API-2 and MK2206 had minimal effects on reducing c-FLIP and enhancement of TRAIL-induced apoptosis, it is likely that API-1 reduces c-FLIP and enhances TRAIL-induced apoptosis independent of its Akt-inhibitory activity. PMID:22345097
Na, Sang-Hoon; Lee, Hae-Young; Hong Baek, Sang; Jeon, Hui-Kyung; Kang, Jin-Ho; Kim, Yoon-Nyun; Park, Chang-Gyu; Ryu, Jae-Kean; Rhee, Moo-Yong; Kim, Moo-Hyun; Hong, Taek-Jong; Choi, Dong-Ju; Cho, Seong-Wook; Cha, Dong-Hun; Jeon, Eun-Seok; Kim, Jae-Joong; Shin, Joon-Han; Park, Sung-Ha; Lee, Seung-Hwan; John, Sung-Hee; Shin, Eun-Seok; Kim, Nam-Ho; Lee, Sung-Yun; Kwan, Jun; Jeong, Myung-Ho; Kim, Sang-Wook; Jeong, Jin-Ok; Kim, Dong-Woon; Lee, Nam-Ho; Park, Woo-Jung; Ahn, Jeong-Cheon; Won, Kyung-Heon; Uk Lee, Seung; Cho, Jang-Hyun; Kim, Soon-Kil; Ahn, Taehoon; Hong, Sukkeun; Yoo, Sang-Yong; Kim, Song-Yi; Kim, Byung-Soo; Juhn, Jae-Hyeon; Kim, Sun-Young; Lee, Yu-Jeong; Oh, Byung-Hee
2015-08-01
The objective of this study was to evaluate the efficacy and safety of the lercanidipine/valsartan combination compared with lercanidipine monotherapy in patients with hypertension. Part 1 of this study was the randomized, multicenter, double-blind, parallel group, Phase III, 8-week clinical trial to compare superiority of lercanidipine 10 mg/valsartan 80 mg (L10/V80) and lercanidipine 10 mg/valsartan 160 mg (L10/V160) combinations with lercanidipine 10 mg (L10) monotherapy. At screening, hypertensive patients, whose diastolic blood pressure (DBP) was >90 mm Hg after 4 weeks with L10, were randomized to 3 groups of L10, L10/V80, and L10/V160. The primary end point was the change in the mean sitting DBP from baseline (week 0) after 8 weeks of therapy. Patients who were randomly assigned to L10/V160 and whose mean DBP was still ≥ 90 mm Hg in part 1 were enrolled to the up-titration extension study with lercanidipine 20 mg/valsartan 160 mg (L20/V160) (part 2). Of 772 patients screened, 497 were randomized to 3 groups (166 in the L10 group, 168 in the L10/V80 group, and 163 in the L10/V160 group). Mean (SD) age was 55 (9.9) years, and male patients comprised 69%. The mean (SD) baseline systolic blood pressure (SBP)/DBP were 148.4 (15.1)/94.3 (9.5) mm Hg. No significant differences were found between groups in baseline characteristics except the percentages of previous history of antihypertensive medication. The primary end points, the changes of mean (SD) DBP at week 8 from the baseline were -2.0 (8.8) mm Hg in the L10 group, -6.7 (8.5) mm Hg in L10/V80 group, and -8.1 (8.4) mm Hg in L10/V160 group. The adjusted mean difference between the combination groups and the L10 monotherapy group was -4.6 mm Hg (95% CI, -6.5 to -2.6; P < 0.001) in the L10/V80 group and -5.9 mm Hg (95% CI, -7.9 to -4.0, P < 0.001) in the L10/V160 group, which had significantly greater efficacy in BP lowering. A total of 74 patients were enrolled in the part 2 extension study. Changes of mean (SD) DBP and SBP from week 8 to week 12 and week 16 were -5.6 (7.9)/-8.0 (12.0) mm Hg and -5.5 (7.0)/-8.5 (11.3) mm Hg, respectively. For evaluation of the safety profile, the frequencies of adverse events between groups were also not significantly different. The most frequently reported adverse events were headache (6 cases, 20.7%) in the L10 group, dizziness (8 cases, 16.3%) in L10/V80 group, and nasopharyngitis (3 cases, 9.4%) in L10/V160 group, and the incidences of adverse events were not different between groups. Treatment of L10/V80 or L10/V160 combination therapy resulted in significantly greater BP lowering compared with L10 monotherapy. Moreover, the L20/V160 high dose combination had additional BP lowering effect compared with nonresponders with the L10/V160 combination. ClinicalTrials.gov: NCT01928628. Copyright © 2015 Elsevier HS Journals, Inc. All rights reserved.
Alli, John Adeolu; Iwalokun, Bamidele A; Oluwadun, Afolabi; Okonko, Iheanyi Omezuruike
2015-01-01
Yogurt and starter culture producers are still searching strains of Lactobacillus acidophilus to produce healthier yogurt with a longer shelf life and better texture, taste, and quality. This study determined the genotyping of bacteriocin producing Lactobacillus acidophilus strains recovered from Nigerian yogurts. Yogurt samples were collected from four different states of South West regions of Nigeria. Isolates were obtained from MRS Medium and biochemically characterized. This was further confirmed by API50CH. The bacteriocin positivity and activity was determined. Genomic characterization of our Lactobacillus acidophilus strains was done with randomly amplified polymorphic DNA-PCR. All yogurt samples containing Lactobacillus acidophilus strains meet the probiotic requirement of ≥10(6) cfu/mL. The gel picture revealed 6 RAPD clonal types of Lactobacillus acidophilus strains with RAPD type C observed to be more common. Significant differences existed in the mean growth inhibition zone (t = -7.32, P < 0.05 for E. coli ATCC; t = -6.19, P < 0.05 for E. coli clinical isolates; t = -6.16, P < 0.05 for Enterobacter sp; t = -11.92, P < 0.05 for Salmonella typhi, t = -1.10, P > 0.05 Staphylococcus aureus). No correlation between the bacteriocin production, activity, and their RAPD clonal division (X(2) = 7.49, P = 0.1610, df = 5). In conclusion, L. acidophilus isolated in Nigeria samples met the probiotic requirements of ≥10(6) cfu/mL and produce bacteriocins with good spectrum of activity.
[Removal of nitrate from groundwater using permeable reactive barrier].
Li, Xiu-Li; Yang, Jun-Jun; Lu, Xiao-Xia; Zhang, Shu; Hou, Zhen
2013-03-01
To provide a cost-effective method for the remediation of nitrate-polluted groundwater, column experiments were performed to study the removal of nitrate by permeable reactive barrier filled with fermented mulch and sand (biowall), and the mechanisms and influence factors were explored. The experimental results showed that the environmental condition in the simulated biowall became highly reduced after three days of operation (oxidation-reduction potential was below - 100 mV), which was favorable for the reduction of nitrate. During the 15 days of operation, the removal rate of nitrate nitrogen (NO3(-) -N) by the simulated biowall was 80%-90% (NO3(-)-N was reduced from 20 mg x L(-1) in the inlet water to 1.6 mg x L(-1) in the outlet water); the concentration of nitrite nitrogen (NO2(-) -N) in the outlet water was below 2.5 mg x L(-1); the concentration of ammonium nitrogen (NH4(+) -N) was low in the first two days but increased to about 12 mg x L(-1) since day three. The major mechanisms involved in the removal of nitrate nitrogen were adsorption and biodegradation. When increasing the water flow velocity in the simulated biowall, the removal rate of NO3(-) -N was reduced and the concentration of NH4(+) -N in the outlet water was significantly reduced. A simulated zeolite wall was set up following the simulated biowall and 98% of the NH4(+) -N could be removed from the water.
NASA Astrophysics Data System (ADS)
Guillochon, James; Cowperthwaite, Philip S.
2018-05-01
We announce the public release of the application program interface (API) for the Open Astronomy Catalogs (OACs), the OACAPI. The OACs serve near-complete collections of supernova, tidal disruption, kilonova, and fast stars data (including photometry, spectra, radio, and X-ray observations) via a user-friendly web interface that displays the data interactively and offers full data downloads. The OACAPI, by contrast, enables users to specifically download particular pieces of the OAC dataset via a flexible programmatic syntax, either via URL GET requests, or via a module within the astroquery Python package.
Majumder, Arpi; Choudhury, Chirantan Roy; Mitra, Samiran; Rosair, Georgina M; El Fallah, M Salah; Ribas, Joan
2005-04-28
Atmospheric CO2 fixation by an aqueous solution containing Cu(ClO4)2.6H2O and 4-aminopyridine (4-apy) yields a novel example of a two-dimensional mu3-CO3 bridged copper(II) complex {[Cu(4-apy)2]3(mu3-CO3)2(ClO4)2.(1/2)CH3OH}n that has been characterized by IR, UV and X-ray crystallography; preliminary magnetic measurements show that complex exhibits long-range ordered ferromagnetic coupling.
Li, Meng; Bi, Chun-Juan; Zhang, Jing-Jing; Lü, Jin-Gang; Chen, Zhen-Lou
2011-11-01
Using a Particle Environment Simulator, laboratory simulation experiment on the influence of resuspension on the release of mercury from sediments collected from medium tidal flat and low tidal flat in Chongming Dongtan was conducted. Results indicated that the conditions of overlying water changed significantly during resuspension. The concentrations of HgD and HgP were mainly in the rang of 0.152-2.657 microg x L(-1), 0.080-2.722 microg x L(-1) separately. In the resuspension processes, mercury was released from the medium intertidal sediments under the salinity condition of 4.1 per thousand, 8.0 per thousand, 10.0 per thousand, 13.0 per thousand, and from the low intertidal sediments under the salinity condition of 13.0 per thousand. However, the release of mercury from the medium intertidal sediments is not significant under the salinity condition of 4.1 per thousand, 8.0 per thousand, 10.0 per thousand. The salinity of overlying water had an important effect on resuspension. In different salinity condition, the release of mercury was different. And the release of mercury from medium tidal flat and low tidal flat was different during the resuspension periods, the release of mercury from the medium intertidal sediment was significantly higher than the release from the low intertidal sediment. When the rotate speed was (210 +/- 5) r x min(-1), the desorption of mercury significantly increased, thereby the rotate speed had an effect on the release of mercury.
[Meningitis and white matter lesions due to Streptococcus mitis in a previously healthy child].
Yiş, Reyhan; Yüksel, Ciğdem Nükhet; Derundere, Umit; Yiş, Uluç
2011-10-01
Streptococcus mitis, an important member of viridans streptococci, is found in the normal flora of the oropharynx, gastrointestinal tract, female genital tract and skin. Although it is of low pathogenicity and virulence, it may cause serious infections in immunocompromised patients. Meningitis caused by S.mitis has been described in patients with previous spinal anesthesia, neurosurgical procedure, malignancy, bacterial endocarditis with neurological complications and alcoholics, but it is rare in patients who are previously healthy. In this report, a rare case of meningoencephalitis caused by S.mitis developed in a previously healthy child has been presented. A previously healthy eight-year-old girl who presented with fever, altered state of consciousness, and headache was hospitalized in intensive care unit with the diagnosis of meningitis. Past history revealed that she was treated with amoxicillin-clavulanate for acute sinusitis ten days before her admission. Whole blood count revealed the followings: hemoglobin 13 g/dl, white blood cell count 18.6 x 109/L (90% neutrophils), platelet count 200 x 109/L and 150 leucocytes were detected on cerebrospinal fluid (CSF) examination. Protein and glucose levels of CSF were 80 mg/dl and 40 mg/dl (concomitant blood glucose 100 mg/dl), respectively. Brain magnetic resonance imaging (MRI) revealed widespread white matter lesions, and alpha-hemolytic streptococci were grown in CSF culture. The isolate was identified as S.mitis with conventional methods, and also confirmed by VITEK2 (bioMerieux, France) and API 20 STREP (bioMerieux, France) systems. Isolate was found susceptible to penicillin, erythromycin, clindamycin, tetracycline, cefotaxime, vancomycin and chloramphenicol. Regarding the etiology, echocardiography revealed no vegetation nor valve pathology, and peripheral blood smear showed no abnormality. Immunoglobulin and complement levels were within normal limits. Ongoing inflammation in maxillary sinuses detected in brain MRI suggested that meningitis could be related to previous sinus infection. After 14 days of ceftriaxone treatment, the patient was discharged from the hospital with cure. The aim of this case presentation was to emphasize that S.mitis may cause meningitis and white matter lesions in previously healthy children with concomitant sinusitis.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Senthil, R.A.; Theerthagiri, J.; Madhavan, J., E-mail: jagan.madhavan@gmail.com
This work describes the effect of 2-aminopyrimidine (2-APY) on poly(vinylidinefluoride-co-hexafluoropropylene) (PVDF-HFP)/polyethylene oxide (PEO) blend polymer electrolyte along with binary iodide salts (tetrabutylammonium iodide (TBAI) and potassium iodide (KI)) and iodine (I{sub 2}) were studied for enhancing the efficiency of the dye-sensitized solar cells (DSSCs) consisting of g-C{sub 3}N{sub 4}/TiO{sub 2} composite as photoanode. The g-C{sub 3}N{sub 4} was synthesized from low cost urea by thermal condensation method. It was used as a precursor to synthesize the various weight percentage ratios (5%, 10% and 15%) of g-C{sub 3}N{sub 4}/TiO{sub 2} composites by wet-impregnation method. The pure and 2-APY incorporated PVDF-HFP/PEO polymermore » blend electrolytes were arranged by wet chemical process (casting method) using DMF as a solvent. The synthesized g-C{sub 3}N{sub 4}/TiO{sub 2} composites and polymer blend electrolytes were studied and analyzed by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffractometer (XRD) and scanning electron microscopy (SEM). The ionic conductivity values of the pure and 2-APY incorporated PVDF-HFP/PEO blend electrolytes were estimated to be 4.53×10{sup −5} and 1.87×10{sup −4} Scm{sup −1} respectively. The UV–vis absorption spectroscopy was carried out for the pure and different wt% of g-C{sub 3}N{sub 4}/TiO{sub 2} composites coated FTO films after N3 dye-sensitization. The 10 wt% g-C{sub 3}N{sub 4}/TiO{sub 2} composite film showed a maximum absorption compared to the others. The DSSC assembled with 10 wt% g-C{sub 3}N{sub 4}/TiO{sub 2} as photoanode using the pure polymer blend electrolyte exhibited a power conversion efficiency (PCE) of 3.17% , which was superior than that of DSSC based pure TiO{sub 2} (2.46%). However, the PCE was increased to 4.73% for the DSSC assembled using 10 wt% g-C{sub 3}N{sub 4}/TiO{sub 2} as photoanode with 2-APY incorporated polymer blend electrolyte. Hence, the present study is a successful attempt to provide a new pathway to enhance the performance of DSSCs. - Graphical abstract: In this study, the g-C{sub 3}N{sub 4} was synthesized from low cost urea and it was used as a precursor to synthesize of g-C{sub 3}N{sub 4}/TiO{sub 2} composite. The pure and 2-APY incorporated PVDF-HFP/PEO electrolytes were fabricated by solution casting method. A remarkably enhanced PCE of 4.73% was observed for 2-APY incorporated PVDF-HFP/PEO electrolyte with g-C{sub 3}N{sub 4}/TiO{sub 2} composite photoanode based DSSC. - Highlights: • 2-APY added PVDF-HFP/PEO electrolyte was prepared by solution casting method. • The g-C{sub 3}N{sub 4}/TiO{sub 2} composites were synthesized by wet-impregnation method. • DSSC with g-C{sub 3}N{sub 4}/TiO{sub 2} and 2-APY added electrolyte showed the efficiency of 4.73 %. • The g-C{sub 3}N{sub 4} and 2-APY can be a useful dopant to enhance the performance of DSSCs.« less
Yamada, Hiroyuki; Suryanarayanan, Raj
2007-08-01
The antiviral compound, 2-amino-6-(4-methoxyphenylthio)-9-[2-(phosphonomethoxy)ethyl]purine bis(2,2,2-trifluoroethyl)ester (MCC-478), can exist in several anhydrous polymorphic forms and also as a hemihydrate. The XRD patterns of the tablets, containing each form of the active pharmaceutical ingredient (API), revealed at least one peak unique to each form. A semiquantitative microdiffractometric method was developed to nondestructively characterize the physical form of the API in intact film-coated tablets. This was accomplished even though the weight fraction of the API was <0.2 and that of mannitol, a highly crystalline excipient, was approximately 0.6. The method was used to determine the effect of aqueous film-coating process on the physical form of the API. The final dosage form was also monitored following storage at 40 degrees C/75% RH for 6 months. There was no phase transformation of the API either due to the film-coating process or following accelerated storage. This technique has potential utility not only for process control during manufacture, but also for the quality control of the final product. (c) 2007 Wiley-Liss, Inc. and the American Pharmacists Association.
Lau, Michael; Young, Paul M; Traini, Daniela
2017-08-01
The aim of the study was to understand the impact of different concentrations of the additive material, magnesium stearate (MGST), and the active pharmaceutical ingredient (API), respectively, on the physicochemical properties and aerosol performance of comilled formulations for high-dose delivery. Initially, blends of API/lactose with different concentrations of MGST (1-7.5% w/w) were prepared and comilled by the jet-mill apparatus. The optimal concentration of MGST in comilled formulations was investigated, specifically for agglomerate structure and strength, particle size, uniformity of content, surface coverage, and aerosol performance. Secondly, comilled formulations with different API (1-40% w/w) concentrations were prepared and similarly analyzed. Comilled 5% MGST (w/w) formulation resulted in a significant improvement in in vitro aerosol performance due to the reduction in agglomerate size and strength compared to the formulation comilled without MGST. Higher concentrations of MGST (7.5% w/w) led to reduction in aerosol performance likely due to excessive surface coverage of the micronized particles by MGST, which led to failure in uniformity of content and an increase in agglomerate strength and size. Generally, comilled formulations with higher concentrations of API increased the agglomerate strength and size, which subsequently caused a reduction in aerosol performance. High-dose delivery was achieved at API concentration of >20% (w/w). The study provided a platform for the investigation of aerosol performance and physicochemical properties of other API and additive materials in comilled formulations for the emerging field of high-dose delivery by dry powder inhalation.
Visual Navigation for an Autonomous Mobile Vehicle
1992-03-26
Group 1 Angle Group 2 1 41 10- 0 80 60 0 20 11 1 9 o30 18 20 17 1 5 1 16-20 -17 -10 -110 -14 -40 -15 1350-30 -12 60 -1 1- 5 -1 -80 -111 70 Figure 6.2...A, M X . 0 .34 y= 267.42 - 220.59- 5 P- -C.7022 nr verify matches= 0 :, A, x- . :4 y= 266. 64 2: 2 81.8 8 .-. 8255 nr verify matches= 0 ,,. x " y...Returns 0 oiherv. ic. / 5 --------------- I--------------------------- int verticaIIr! EDGE ’r: return <(lbs~r->a\\ _phi, VERTCONSTRAINT) 1I
Solid state stability and solubility of triethylenetetramine dihydrochloride.
Henriet, Théo; Gana, Inès; Ghaddar, Carine; Barrio, Maria; Cartigny, Yohann; Yagoubi, Najet; Do, Bernard; Tamarit, Josep-Lluis; Rietveld, Ivo B
2016-09-10
The API triethylenetetramine dihydrochloride used as an alternative treatment of Wilson's disease is sensitive to water and it exhibits polymorphism. As this may become an issue for the drug formulation, the physical stability has been studied by differential scanning calorimetry, high-pressure thermal analysis, dynamic vapor sorption, and X-ray diffraction as a function of temperature. In addition, high-pressure liquid chromatography and mass spectrometry have been used to study the purity and chemical stability of the API. A pressure-temperature phase diagram of the pure compound has been constructed and it can be concluded that form II is monotropic in relation to form I, which is the only stable solid. The solubilities of the different solid forms have been determined with the help of a temperature - composition phase diagram. The API is very soluble, at 20° C about 10% of the saturated solution with respect to the dihydrate consists of API and the solubility of the pure form I is twice as high. Moreover, it has been shown that at 20°C, a relative humidity above 40% induces the formation of the dihydrate and at 70% a saturated solution appears. At higher temperatures, the formation of the dihydrate appears at lower relative humidity values. A clear link has been established between the API's chemical stability, its physical stability and the relative humidity in the air. Humidity levels above 40% are detrimental to the quality of the API. Copyright © 2016 Elsevier B.V. All rights reserved.
Impact of tire debris on in vitro and in vivo systems
Gualtieri, Maurizio; Andrioletti, Manuela; Mantecca, Paride; Vismara, Claudio; Camatini, Marina
2005-01-01
Background It is estimated that over 80% of respirable particulate matter (PM10) in cities comes from road transport and that tire and brake wear are responsible for the 3–7% emission of it. Data on the indicators of environmental impact of tire debris (TD), originated from the tire abrasion on roads, are extremely scarce, even though TD contains chemicals (zinc and organic compounds) which can be released in the environment. Methods TD particle morphology was analysed with SEM, TEM and FIB instruments. TD eluates and TD organic extracts were tested at dilution series on human cell lines and Xenopus laevis embryos. 50 and 100 g/L TD were used for the eluates obtained after 24 h at pH 3 and the quantity of zinc present was measured with a ICP-AES. Eluates diluted to 1%, 10%, 50% in culture media and undiluted were used on X. laevis embryos in the FETAX test. HepG2 cells were exposed for 24 h to 0.05 – 50 μg/ml of zinc salt while A549 cells were exposed for 24, 48 and 72 h to 10, 50, 60, or 75 μg/ml of TD extract. X. laevis embryos were exposed to 50, 80, 100, or 120 μg/ml TD extract. Results The solution of undiluted 50 g/L TD produced 80.2% mortality (p < 0.01) in X. laevis embryos and this toxic effect was three times greater than that produced by 100 g/L TD. Zn accumulation in HepG2 cells was evident after 4 h exposure. A549 cells exposed to TD organic extract for 72 h presented a modified morphology, a decrease in cell proliferation and an increase in DNA damage as shown by comet assay. The dose 80 μg/ml of TD extract produced 14.6% mortality in X. laevis embryos and 15.9% mortality at 120 μg/ml. Treatment with 80, 100, or 120 μg/ml TD organic extract increased from 14.8% to 37.8% malformed larvae percentages compared to 5.6% in the control. Conclusion Since the amount of Zn leached from TD is related to pH, aggregation of particles and elution process, the quantity of TD present in the environment has to be taken into account. Moreover the atmospheric conditions, which may deeply influence the particle properties, have to be considered. The TD organic fraction was toxic for cells and organisms. Thus, because of its chemical components, TD may have a potential environmental impact and has to be further investigated. PMID:15813962
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cruz Vieira, I. da; Fatibello-Filho, O.
An amperometric biosensor for the determination of phenols is proposed using a crude extract of sweet potato (Ipomoea batatas (L.) Lam.) as an enzymatic source of polyphenol oxidase (PPO; tyrosinase; catechol oxidase; EC 1.14.18.1). The biosensor is constructed by the immobilization of sweet potato crude extract with glutaraldehyde and bovine serum albumin onto an oxygen membrane. This biosensor provides a linear response for catechol, pyrogallol, phenol and p-cresol in the concentration ranges of 2.0 x 10{sup -5} -4.3 x 10{sup -4} mol L{sup -1}, 2.0 x 10{sup -5} -4.3 x 10{sup -4} mol L{sup -1}, 2.0 x 10{sup -5} -4.5more » x 10{sup -4} mol L{sup -1} and 2.0 x 10{sup -5} -4.5 x 10{sup -4} mol L{sup -1}, respectively. The response time was about 3-5 min for the useful response range, and the lifetime of this electrode was excellent for fifteen days (over 220 determinations for each enzymatic membrane). Application of this biosensor for the determination of phenols in industrial wastewaters is presented.« less
NASA Astrophysics Data System (ADS)
Senobari, Samaneh; Nezamzadeh-Ejhieh, Alireza
2018-05-01
Coupled CdS-CuO nanoparticles (NPs) subjected in the photocatalytic degradation of Methylene blue (MB) aqueous solution. The calcination temperature and the crystallite phase of CuO had a significant role on the photocatalytic activity of the coupled system and CuO200/2h-CdS catalyst (containing CuO calcined at 200 °C for 2 h) showed the best photocatalytic activity. The coupled system showed increased activity with respect to the monocomponent semiconductors. The prepared catalysts characterized by x-ray diffraction (XRD), scanning electron microscope equipped with energy dispersive X-ray (EDX) analyzer, x-ray mapping, Fourier transform infrared (FTIR) spectroscopy, diffuse reflectance spectroscopy (DRS) and electrochemical impedance spectroscopy (EIS) techniques. The best degradation extent of MB was obtained at: CMB: 1 mg L-1, pH 5, 80 min irradiation time and 0.8 g L-1 of the CuO200/2h-CdS catalyst. The chemical oxygen demand (COD) confirmed about 83% of MB molecules can be mineralized at the optimum conditions.
Xiao, Lizu; Cheng, Jianguo; Dai, Juanli; Zhang, Deren
2011-09-01
We aim to determine the effects of Botulinum toxin type A (BTX-A) on neuropathic pain behavior and the expression of P2X(3) receptor in dorsal root ganglion (DRG) in rats with neuropathic pain induced by L5 ventral root transection (L5 VRT). Neuropathic pain was induced by L5 VRT in male Sprague-Dawley rats. Either saline or BTX-A was administered to the plantar surface. Behavioral tests were conducted preoperatively and at predefined postoperative days. The expression of P2X(3) receptors in DRG neurons was detected by immunoreactivity at postoperative days 3, 7, 14, and 21. The number of positive P2X(3) neurons in the ipsilateral L5 DRG increased significantly after L5 VRT (P<0.001). This increase persisted for at least 3 weeks after the operation. No significant changes in P2X(3) expression were detected in the contralateral L5, or in the L4 DRGs bilaterally. Subcutaneous administration of BTX-A, performed on the left hindpaw at days 4, 8, or 16 post VRT surgery, significantly reduced mechanical allodynia bilaterally and inhibited P2X(3) over-expression induced by L5 VRT. L5 VRT led to over-expression of P2X(3) receptors in the L5 DRG and bilateral mechanical allodynia in rats. Subcutaneous injection of BTX-A significantly reversed the neuropathic pain behavior and the over-expression of P2X(3) receptor in nociceptive neurons. These data not only show over-expression of purinergic receptors in the VRT model of neuropathic pain but also reveal a novel mechanism of botulinum toxin action on nociceptive neurons. Wiley Periodicals, Inc.
Paraquat adsorption on NaX and Al-MCM-41.
Rongchapo, Wina; Deekamwong, Krittanun; Loiha, Sirinuch; Prayoonpokarach, Sanchai; Wittayakun, Jatuporn
2015-01-01
The aim of this work is to determine paraquat adsorption capacity of zeolite NaX and Al-MCM-41. All adsorbents were synthesized by hydrothermal method using rice husk silica. For Al-MCM-41, aluminum (Al) was added to the synthesis gel of MCM-41 with Al content of 10, 15, 20 and 25 wt%. The faujasite framework type of NaX and mesoporous characteristic of Al-MCM-41 were confirmed by X-ray diffraction. Surface area of all adsorbents determined by N2 adsorption-desorption analysis was higher than 650 m2/g. Al content and geometry were determined by X-ray fluorescence and 27Al nuclear magnetic resonance, respectively. Morphology of Al-MCM-41 were studied by transmission electron microscopy; macropores and defects were observed. The paraquat adsorption experiments were conducted using a concentration range of 80-720 mg/L for NaX and 80-560 mg/L for Al-MCM-41. The paraquat adsorption isotherms from all adsorbents fit well with the Langmuir model. The adsorption capacity of NaX was 120 mg/g-adsorbent. Regarding Al-MCM-41, the 10% Al-MCM-41 exhibited the lowest capacity of 52 mg/g-adsorbent while the other samples had adsorption capacity of 66 mg/g-adsorbent.
Karabıçak, Nilgün; Uludağ Altun, Hatice; Karatuna, Onur; Hazırolan, Gülşen; Aksu, Neriman; Adiloğlu, Ali; Akyar, Işın
2015-04-01
Accurate and rapid identification of yeast isolates have become important in recent years for not only antifungal susceptibility testing due to the species-specific clinical resistance breakpoints but also early initiation of appropriate antifungal therapy. In clinical microbiology laboratories species identification of yeasts is often performed with several commercial systems based on biochemical properties and rarely according to the physiological and morphological characteristics. The aim of this study was to compare the two common commercial systems, VITEK 2 YST ID Card (Vitek; bioMérieux, France) and API 20C AUX (API; bioMérieux, France) with conventional mycological methods. A total of 473 clinical yeast strains isolated from clinical specimens in different university and training/research hospitals and identified by Vitek system were included in the study. The isolates were re-identified with API and conventional methods including morphological identification in the Mycology Reference Laboratory of the Public Health Institute of Turkey. Candida dubliniensis MYA 583, Candida krusei ATCC 6258, Candida parapsilosis ATCC 22019, Candida albicans ATCC 10231 and Cryptococcus neoformans ATCC 32268 were used as quality control strains and those standard strains were studied consecutively 10 days with both of the methods. The results of identification by Vitek and API were compared with the results of conventional methods for those 473 yeast isolates [6 genus (Candida, Cryptococcus, Blastoshizomyces, Rhodotorula, Saccharomyces, Trichosporon), 17 species (5 common and 12 rarely isolated)]. The performances of the systems were better (Vitek: 95%; API: 96%) for the commonly detected species (C.albicans, C.parapsilosis, C.glabrata, C.tropicalis and C.krusei) than those for rarely detected species (Vitek: 78.4%; API: 71.6%) (p= 0.155). Misidentification or unidentification were mostly detected for C.parapsilosis (Vitek: 6/87; API: 7/87) and C.glabrata (Vitek: 9/104; API: 3/104) by both of the systems. For rarely detected yeast isolates, misidentification or unidentification were most frequently observed in species of C.pelliculosa (Vitek: 3/11; API: 6/11) and C.dubliniensis (API and Vitek: 2/5) isolates. Candida guilliermondii (API: 2/5) isolates had lower rate of identification with API compared to other species. Blastoschizomyces capitatus and Saccharomyces cerevisiae isolates could not be identified by both of the systems. As a result, the accurate diagnosis of Vitek and API systems were similar in terms of consistency (86.3%). Two systems performed well in correct identification of common clinical yeast species (at least 95%), while the identification of rare species was more challenging indicating that they require further morphological and physiological testing. The addition of morphological identification to commercial systems will be useful for accurate diagnosis and treatment of mixed infections.
Abia, Akebe Luther King; Ubomba-Jaswa, Eunice; Genthe, Bettina; Momba, Maggy Ndombo Benteke
2016-10-01
Although higher microbial concentrations have been reported in sediments than in the overlying water column, most quantitative microbial risk assessment (QMRA) studies have not clearly indicated the contribution of sediment-borne pathogens to estimated risks. Thus, the present study aimed at determining the public health risk associated with exposure to pathogenic bacteria in polluted river water under undisturbed conditions and conditions of sediment resuspension in the Apies River, Gauteng, South Africa. Microbial pathogens were isolated and identified using culture and molecular methods. The beta-Poisson dose-response model was used to estimate the probability of infection (Pi) with the various pathogens, following accidental/intentional ingestion of 1mL or 100mL (or 50mL) of untreated river water. Mean wet season Escherichia coli counts ranged between 5.8E+01 and 8.8E+04MPN/100mL (water column) and between 2.40E+03 and 1.28E+05MPN/100mL (sediments). Mean dry season E. coli counts ranged between 5.11E+00 and 3.40E+03MPN/100mL (water column) and between 5.09E+00 and 6.30E+03MPN/100mL (sediments). Overall (water and sediments) Vibrio cholerae was the most detected pathogen (58.8%) followed by Salmonella spp. (23.9%) and Shigella (10.1%). Ingestion of 1mL of river water could lead to 0%-4% and 1%-74% Pi with E. coli during the dry and wet season, respectively. During the dry season, the Pi with V. cholerae, Salmonella spp. and Shigella spp. were 0%-1.39%, 0%-4.11% and 0%-0.16% respectively, depending on volume of water ingested. The risks of infections with all microorganisms increased during the wet season. A 2-log increase in water E. coli count following sediments disturbance led to approximately 10 times higher Pi with E. coli than when sediments were undisturbed. Therefore, the use of the untreated water from the Apies River for drinking, household purposes or recreational activities poses a potential health risk to the users of the river. Copyright © 2016 Elsevier B.V. All rights reserved.
Characterization of activated carbon prepared from chicken waste and coal
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yan Zhang; Hong Cui; Riko Ozao
Activated carbons (ACs) were prepared from chicken waste (CW) and coal (E-coal) blended at the ratios of 100:0, 80:20, 50:50, 20:80, and 0:100. The process included carbonization in flowing gaseous nitrogen (300 mL min{sup -1}) at ca. 430{sup o}C for 60 min and successive steam activation (0.1 mL min{sup -1} water injection with a flow of N{sub 2} at 100 mL min{sup -1}) at 650{sup o}C for 30 min. Chicken waste is low in sulfur content but is high in volatile matter (about 55 wt %), and ACs with higher specific surface area were more successfully obtained by mixing withmore » coal. The specific surface area of the CW/Coal blend AC can be estimated by SSA{sub BET} = -65.8x{sup 2} + 158x + 168, where SSA{sub BET} is the specific surface area in m{sup 2} g{sup -1} as determined by the BET method using CO{sub 2} as the adsorbent, where x is the coal fraction by weight in the CW/coal blend ranging from 0.0 to 1.0 (e.g., x = 0.0 signifies the blend contains no coal and x = 1.0 signifies the blend consists of 100% coal). 26 refs., 7 figs., 3 tabs.« less
Theoretical and experimental study of fenofibrate and simvastatin
NASA Astrophysics Data System (ADS)
Nicolás Vázquez, Inés; Rodríguez-Núñez, Jesús Rubén; Peña-Caballero, Vicente; Ruvalcaba, Rene Miranda; Aceves-Hernandez, Juan Manuel
2017-12-01
Fenofibrate, an oral fibrate lipid lowering agent, and simvastatin, which reduces plasma levels of low-density lipoprotein cholesterol, are active pharmaceutical ingredients (APIs), currently in the market. We characterized these APIs by thermal analysis and conducted X-ray powder diffraction techniques. Studies should be carried out in the formulation stage before the final composition of a polypill may be established. Thus, it was found in thermochemical studies that both compounds present no chemical interactions in an equimolar mixture of solid samples at room temperature. Theoretical studies were employed to determine possible interactions between fenofibrate and simvastatin. A very weak intramolecular hydrogen bond is formed between the hydroxyl group (O5H5) of the simvastatin with chlorine and carbonyl group (C11O4, C1O2) of the fenofibrate molecule. These weak energy hydrogen bonds have no effect on the chemical stability of the compounds studied. The results were obtained using Density Functional Theory methods; particularly the BPE1BPE and B3LYP functional and 6-31++G** basis set. The values of energy show good approximation when are compared with similar calculations previously reported. Infrared spectra of monomers and dimers were obtained via theoretical calculations.
Billat, V L; Slawinksi, J; Bocquet, V; Chassaing, P; Demarle, A; Koralsztein, J P
2001-04-01
The purpose of this study was to compare the effectiveness of three very short interval training sessions (15-15 s of hard and easier runs) run at an average velocity equal to the critical velocity to elicit VO2 max for more than 10 minutes. We hypothesized that the interval with the smallest amplitude (defined as the ratio between the difference in velocity between the hard and the easy run divided by the average velocity and multiplied by 100) would be the most efficient to elicit VO2 max for the longer time. The subjects were middle-aged runners (52 +/- 5 yr, VO2 max of 52.1 +/- 6 mL x min(-1) x kg(-1), vVO2 max of 15.9 +/- 1.8 km x h(-1), critical velocity of 85.6 +/- 1.2% vVO2 max) who were used to long slow distance-training rather than interval training. They performed three interval-training (IT) sessions on a synthetic track (400 m) whilst breathing through the COSMED K4b2 portable metabolic analyser. These three IT sessions were: A) 90-80% vVO2 max (for hard bouts and active recovery periods, respectively), the amplitude= (90-80/85) 100=11%, B) 100-70% vVO2 max amplitude=35%, and C) 60 x 110% vVO2 max amplitude = 59%. Interval training A and B allowed the athlete to spend twice the time at VO2 max (14 min vs. 7 min) compared to interval training C. Moreover, at the end of interval training A and B the runners had a lower blood lactate than after the procedure C (9 vs. 11 mmol x l(-1)). In conclusion, short interval-training of 15s-15s at 90-80 and 100-70% of vVO2 max proved to be the most efficient in stimulating the oxygen consumption to its highest level in healthy middle-aged long-distance runners used to doing only long slow distance-training.
Genetics Home Reference: Lowe syndrome
... inheritance is that fathers cannot pass X-linked traits to their sons. In some cases of Lowe ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Genetics Home Reference: Danon disease
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Genetics Home Reference: frontometaphyseal dysplasia
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Two Energy Futures: A National Choice for the 80s.
ERIC Educational Resources Information Center
American Petroleum Inst., Washington, DC.
Examined in this American Petroleum Institute (API) publication on energy technology and energy policy, is the future potential of oil, natural gas, coal, nuclear energy, synthetic fuels, and renewable energy resources. Among the related issues emphasized are environmental protection, access to federal lands, government policies, and the national…
NASA Astrophysics Data System (ADS)
Hansel, A.; Scholz, W.; Mentler, B.; Fischer, L.; Berndt, T.
2017-12-01
The performance of the novel ammonium-CI3-TOF utilizing NH4+ adduct ion chemistry to measure quantitatively first generation oxidized product molecules (OMs) as well as highly oxidized organic molecules (HOMs) was investigated for the first time. The gas-phase ozonolysis of cyclohexene served as a test system in order to evaluate the capability of the detection systems. Experiments have been carried out in the TROPOS free-jet flow system at close to atmospheric conditions. Product ion signals were simultaneously observed by the ammonium-CI3-TOF and the acetate-CI-API-TOF. Both instruments are in remarkable good agreement within a factor of two for HOMs. For OMs not containing an OOH group the acetate technique can considerably underestimate OM concentrations by 2-3 orders of magnitude. First steps of cyclohexene ozonolysis generate ten different (m/z product peaks) main products comprising 92% of observed OMs. The remaining 8% are distributed over several (m/z peaks) minor products that can be attributed to HOMs, predominately to highly oxidized RO2 radicals. Summing up, observed ammonium-CI3-TOF products yield 4.9 x 109 molecules cm-³ in excellent agreement with the amount of reacted cyclohexene of 5.0 x 109 molecules cm-³ for reactant concentrations of [O3] = 2.25 x 1012 molecules cm-³ and [cyclohexene] = 2.0 x 1012 molecules cm-³ and a reaction time of 7.9 s. NH4+ adduct ion chemistry based CIMS techniques offer a unique opportunity for complete detection of the whole product distribution, and consequently, for a much better understanding of atmospheric oxidation processes.
[Degradation of 2, 4-dichlorophenol in aqueous solution by ZVI/EDDS/air system].
Sun, Qian; Zhou, Hai-Yan; Cao, Meng-Hua; Wu, Lin-Na; Wang, Lin-Ling; Chen, Jing; Lu, Xiao-Hua
2012-11-01
A new oxidation system of Fenton-like system (ZVI/EDDS/Air) has been developed to degrade 2,4-chlorophenols (2,4-DCP) in aqueous solution. The influences of initial conditions, i. e., EDDS concentration, iron dosage, aeration rate, 2,4-DCP concentration and pH as well as reaction temperature on the degradation of 2,4-DCP were studied. The results demonstrated that this ZVI/EDDS/Air system was able to effectively degrade 2,4-DCP in aqueous solution, and the degradation of 2,4-DCP conforms to the pseudo-first-order reaction kinetics equation. Removal of above 99% 2,4-DCP was achieved in ZVI/EDDS/Air system at room temperature and pressure after 1 h reaction when the initial conditions were 2,4-DCP 100 mg x L(-1), EDDS 0.80 mmo x L(-1), ZVI 20 g x L(-1), aeration rate 2 L x (min x L)(-1). Compared with ZVI/EDTA/Air system, ZVI/EDDS/Air system showed higher efficiency in the degradation of 2,4-DCP at ambient circumstance and was more environmentally benign.
The diffuse soft X-ray background as seen with the Einstein Observatory
NASA Technical Reports Server (NTRS)
Micela, G.; Sciortino, S.; Vaiana, G. S.; Harnden, F. R., Jr.; Rosner, R.
1991-01-01
A systematic survey of the diffuse soft X-ray background as seen directly with the Einstein Observatory is presented. With the aid of 1633 selected 1 x 1 deg fields of view obtained by the IPC to provide about 5-percent sky coverage, with some bias toward the Galactic plane, the background in the 0.16-3.5 keV spectral region was spatially resolved on this angular scale. Maps of the background are characterized and produced at different energies within the Einstein passband. It is confirmed that the Galactic ridge is not present at energies below 0.33 keV and it is demonstrated that the appearance of the ridge above this energy is not due to hard Galactic sources with a flux above 10 exp -13 ergs/sq cm/s. A southern Galactic region is identified, with l between 80 and 180 deg and b less than -5 deg, where the mean background intensity has the lowest value and is homogeneous within better than 9 percent. The implications of these results for the Galactic structure and for the nature of the extragalactic X-ray background are discussed.
Diffusive sampling of methylene chloride with solid phase microextraction.
Chen, Cheng-Yao; Hsiech, Chunming; Lin, Jia-Ming
2006-12-29
This study examined the characteristics of a solid phase microextraction (SPME) assembly as a passive sampler to determine the short-term exposure level (STEL) of methylene chloride. Two types of SPME fibers and six sampling-related factors were chosen and nested in an L(18) Taguchi's orthogonal array. Samples were thermally desorpted and analyzed by gas chromatograph equipped with an electron capture detector (GC/ECD). The use of 85-mum Carboxen/polydimethylsiloxane (Car/PDMS) fibers resulted in greater adsorbed mass, which was highly correlated with the product of concentration and sampling time (r>0.99, p<0.0001), than 85-microm polyacrylate fibers. The sampling rate (SR) of the 85-microm Carboxen/polydimethylsiloxane fibers was not significantly affected by variations in relative humidity (0-80%) and coexistent toluene (none to 100 ppm). Variance of sampling rate was predominantly attributed to the diffusive path length (86.4%) and sampling time (5.7%). With diffusive paths of 3, 10 and 15 mm, the sampling rates of 85-microm Carboxen/polydimethylsiloxane fibers for methylene chloride were 1.4 x 10(-2), 7.7 x 10(-3) and 5.1 x1 0(-3)mL min(-1), respectively. The measured sampling rates were greater than the theoretical values, and decreased with increment of sampling time until they came to constant.
[Preparation and chromaticity properties of colored dental 3Y-TZP ceramics].
Yi, Yuan-fu; Wang, Chen; Tian, Jie-mo; Liu, Hong-chen; Wen, Ning
2008-10-01
To obtain and investigate the chromaticity properties of colored dental 3Y-TZP ceramics with different colorant combinations. Colorant combinations were mixed with TZ-3Y-S powder, then the mixtures were compacted at 200 MPa using cold isostatic pressure, densely sintered at 1500 degrees C for 2 h forming 5 graded colored dental zirconia ceramics. Specimen were sectioned into 10 mm x 10 mm x 0.5 mm and 10 mm x l0 mmx 1 mm slices from the sintered blocks. Color measurement was performed under black background using spectrophotometer. The chromaticity properties were compared with that of the VITA In-Ceram YZ shade guide. Five colored dental zirconia ceramics were obtained. The lightness decreased gradually, and the chroma value increased gradually. The color differences of the two thickness specimens were little. The parameters of the color space were L*: 67.76-77.78; a*: -2.19-3.80; b*: 12.13-25.01, which was similar with that of the VITA In-Ceram YZ shade guide, while the lowest value of lightness was relatively higher than that of the VITA In-Ceram YZ shade guide. Colored 3Y-TZP dental ceramics are suitable for clinical use. There is a need to develop more darkness shaded zirconia dental ceramics.
SPECTRAL PROPERTIES OF X-RAY BINARIES IN CENTAURUS A
DOE Office of Scientific and Technical Information (OSTI.GOV)
Burke, Mark J.; Raychaudhury, Somak; Kraft, Ralph P.
2013-04-01
We present a spectral investigation of X-ray binaries (XBs) in NGC 5128 (Cen A), using six 100 ks Chandra observations taken over two months in 2007. We divide our sample into thermally and non-thermally dominated states based on the behavior of the fitted absorption column N{sub H}, and present the spectral parameters of sources with L{sub x} {approx}> 2 Multiplication-Sign 10{sup 37} erg s{sup -1}. The majority of sources are consistent with being neutron star low-mass X-ray binaries (NS LMXBs) and we identify three transient black hole (BH) LMXB candidates coincident with the dust lane, which is the remnant ofmore » a small late-type galaxy. Our results also provide tentative support for the apparent 'gap' in the mass distribution of compact objects between {approx}2-5 M{sub Sun }. We propose that BH LMXBs are preferentially found in the dust lane, and suggest this is because of the younger stellar population. The majority ({approx}70%-80%) of potential Roche lobe filling donors in the Cen A halo are {approx}> 12 Gyr old, while BH LMXBs require donors {approx}> 1 M{sub Sun} to produce the observed peak luminosities. This requirement for more massive donors may also explain recent results that claim a steepening of the X-ray luminosity function with age at L{sub x} {>=} 5 Multiplication-Sign 10{sup 38} erg s{sup -1} for the XB population of early-type galaxies; for older stellar populations, there are fewer stars {approx}> 1 M{sub Sun }, which are required to form the more luminous sources.« less
Content determination of aniracetam in aniracetam inclusion complex by HPLC.
Li, Yongjian; Hu, Dejian; Sun, Yong
2009-01-01
We established a HPLC method for content determination of aniracetam in aniracetam inclusion complex. The chromato column was Agilent ODS (4.6mm x 150mm, 5 microm), the mobile phase was methanol-0.01 mol/L Potassium dihydrogen phosphate buffer solution (25:75, pH 3.0), with the flow rate of 1.0 ml/min, column temperature of 30 degrees and the detection wave at 280 nm, the sample size was 20microL. A good linear relationship was obtained between the peak areas and the concentrations of aniracetam in the range from 5- 80microg/ml (r=0.9998), the mean recovery was 100.1% (n=15), RSD=0.19%. This method is convenient, rapid, accurate, and brings about good recovery; it can be used for content determination of aniracetam in aniracetam inclusion complex.
Li, Bo; Ren, Hui; Yue, Ping; Chen, Mingwei; Khuri, Fadlo R; Sun, Shi-Yong
2012-04-01
API-1 (pyrido[2,3-d]pyrimidines) is a novel small-molecule inhibitor of Akt, which acts by binding to Akt and preventing its membrane translocation and has promising preclinical antitumor activity. In this study, we reveal a novel function of API-1 in regulation of cellular FLICE-inhibitory protein (c-FLIP) levels and TRAIL-induced apoptosis, independent of Akt inhibition. API-1 effectively induced apoptosis in tested cancer cell lines including activation of caspase-8 and caspase-9. It reduced the levels of c-FLIP without increasing the expression of death receptor 4 (DR4) or DR5. Accordingly, it synergized with TRAIL to induce apoptosis. Enforced expression of ectopic c-FLIP did not attenuate API-1-induced apoptosis but inhibited its ability to enhance TRAIL-induced apoptosis. These data indicate that downregulation of c-FLIP mediates enhancement of TRAIL-induced apoptosis by API-1 but is not sufficient for API-1-induced apoptosis. API-1-induced reduction of c-FLIP could be blocked by the proteasome inhibitor MG132. Moreover, API-1 increased c-FLIP ubiquitination and decreased c-FLIP stability. These data together suggest that API-1 downregulates c-FLIP by facilitating its ubiquitination and proteasome-mediated degradation. Because other Akt inhibitors including API-2 and MK2206 had minimal effects on reducing c-FLIP and enhancement of TRAIL-induced apoptosis, it is likely that API-1 reduces c-FLIP and enhances TRAIL-induced apoptosis independent of its Akt-inhibitory activity. 2012 AACR
Frick, Marcel; Fischer, Jörg; Helbling, Arthur; Ruëff, Franziska; Wieczorek, Dorothea; Ollert, Markus; Pfützner, Wolfgang; Müller, Sabine; Huss-Marp, Johannes; Dorn, Britta; Biedermann, Tilo; Lidholm, Jonas; Ruecker, Gerta; Bantleon, Frank; Miehe, Michaela; Spillner, Edzard; Jakob, Thilo
2016-12-01
Component resolution recently identified distinct sensitization profiles in honey bee venom (HBV) allergy, some of which were dominated by specific IgE to Api m 3 and/or Api m 10, which have been reported to be underrepresented in therapeutic HBV preparations. We performed a retrospective analysis of component-resolved sensitization profiles in HBV-allergic patients and association with treatment outcome. HBV-allergic patients who had undergone controlled honey bee sting challenge after at least 6 months of HBV immunotherapy (n = 115) were included and classified as responder (n = 79) or treatment failure (n = 36) on the basis of absence or presence of systemic allergic reactions upon sting challenge. IgE reactivity to a panel of HBV allergens was analyzed in sera obtained before immunotherapy and before sting challenge. No differences were observed between responders and nonresponders regarding levels of IgE sensitization to Api m 1, Api m 2, Api m 3, and Api m 5. In contrast, Api m 10 specific IgE was moderately but significantly increased in nonresponders. Predominant Api m 10 sensitization (>50% of specific IgE to HBV) was the best discriminator (specificity, 95%; sensitivity, 25%) with an odds ratio of 8.444 (2.127-33.53; P = .0013) for treatment failure. Some but not all therapeutic HBV preparations displayed a lack of Api m 10, whereas Api m 1 and Api m 3 immunoreactivity was comparable to that of crude HBV. In line with this, significant Api m 10 sIgG 4 induction was observed only in those patients who were treated with HBV in which Api m 10 was detectable. Component-resolved sensitization profiles in HBV allergy suggest predominant IgE sensitization to Api m 10 as a risk factor for treatment failure in HBV immunotherapy. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.
Genetics Home Reference: mucopolysaccharidosis type II
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Genetics Home Reference: familial dilated cardiomyopathy
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Genetics Home Reference: phosphoglycerate kinase deficiency
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Genetics Home Reference: Melnick-Needles syndrome
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
In Vitro and In Vivo Anti-tumoral Effects of the Flavonoid Apigenin in Malignant Mesothelioma
Masuelli, Laura; Benvenuto, Monica; Mattera, Rosanna; Di Stefano, Enrica; Zago, Erika; Taffera, Gloria; Tresoldi, Ilaria; Giganti, Maria Gabriella; Frajese, Giovanni Vanni; Berardi, Ginevra; Modesti, Andrea; Bei, Roberto
2017-01-01
Malignant mesothelioma (MM) is a tumor arising from mesothelium. MM patients’ survival is poor. The polyphenol 4′,5,7,-trihydroxyflavone Apigenin (API) is a “multifunctional drug”. Several studies have demonstrated API anti-tumoral effects. However, little is known on the in vitro and in vivo anti-tumoral effects of API in MM. Thus, we analyzed the in vitro effects of API on cell proliferation, cell cycle regulation, pro-survival signaling pathways, apoptosis, and autophagy of human and mouse MM cells. We evaluated the in vivo anti-tumor activities of API in mice transplanted with MM #40a cells forming ascites. API inhibited in vitro MM cells survival, increased reactive oxygen species intracellular production and induced DNA damage. API activated apoptosis but not autophagy. API-induced apoptosis was sustained by the increase of Bax/Bcl-2 ratio, increase of p53 expression, activation of both caspase 9 and caspase 8, cleavage of PARP-1, and increase of the percentage of cells in subG1 phase. API treatment affected the phosphorylation of ERK1/2, JNK and p38 MAPKs in a cell-type specific manner, inhibited AKT phosphorylation, decreased c-Jun expression and phosphorylation, and inhibited NF-κB nuclear translocation. Intraperitoneal administration of API increased the median survival of C57BL/6 mice intraperitoneally transplanted with #40a cells and reduced the risk of tumor growth. Our findings may have important implications for the design of MM treatment using API. PMID:28674496
EPO, red cells, and serum transferrin receptor in continuous and intermittent hypoxia.
Koistinen, P O; Rusko, H; Irjala, K; Rajamäki, A; Penttinen, K; Sarparanta, V P; Karpakka, J; Leppäluoto, J
2000-04-01
Erythropoietic response in 10 healthy nonsmoking volunteers exposed to normobaric hypoxia continuously or intermittently 12 h daily for 7 d was evaluated in a randomized cross-over study. An oxygen content of 15.4% corresponding to an altitude of 2500 m was created by adding nitrogen into room air in a flat. Venous blood samples for hemoglobin (Hb), hematocrit (Hct), reticulocytes, serum erythropoietin (S-EPO), red cell 2,3-diphosphoglycerate (2,3-DPG), serum ferritin (S-Ferrit), and serum soluble transferrin receptor (S-TransfR) were drawn at 8:00 a.m. S-EPO was increased from baseline values of 22.9+/-9.6 and 20.5+/-10.1 U x L(-1) to 40.7+/-12.9 (P < 0.05) and 35+/-14.3 U x L(-1) (P < 0.05) after the first night in continuous and intermittent hypoxia, respectively, and remained elevated throughout both exposures. Hb and Hct values did not show any significant changes. Red cell 2,3-DPG rose from baseline a value of 5.0+/-0.8 to 5.9+/-0.7 mmol x L(-1) (P < 0.05) after the first day in continuous hypoxia and from 5.2+/-0.7 mmol x L(-1) to 6.1+/-0.5 mmol x L(-1) on day 3 (P < 0.05) during intermittent hypoxia. The reticulocyte count rose significantly (P < 0.05) after 5 d in both experiments. S-transferrin receptor level rose significantly from 2.2+/-0.4 and 2.1+/-0.5 mg x L(-1) to 2.6+/-0.5 mg x L(-1) and 2.3+/-0.6 mg x L(-1) on day 5 (P < 0.05), to 2.7+/-0.5 mg x L(-1) and 2.5+/-0.6 mg x L(-1) on day 7 (P < 0.05) under continuous and intermittent hypoxia, respectively. We suggest that intermittent exposure to moderate normobaric hypoxia 12 h daily for 1 wk induces a similar stimulation of erythropoiesis as continuous exposure.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Robbins, Mike E.; Brain Tumor Center of Excellence, Wake Forest University School of Medicine, Winston-Salem, NC; Payne, Valerie B.S.
2009-02-01
Purpose: We hypothesized that administration of the angiotensin type 1 (AT1) receptor antagonist, L-158,809, to young adult male rats would prevent or ameliorate fractionated whole-brain irradiation (WBI)-induced cognitive impairment. Materials and Methods: Groups of 80 young adult male Fischer 344 x Brown Norway (F344xBN) rats, 12-14 weeks old, received either: (1) fractionated WBI; 40 Gy of {gamma} rays in 4 weeks, 2 fractions/week, (2) sham-irradiation; (3) WBI plus L-158,809 (20 mg/L drinking water) starting 3 days prior, during, and for 14, 28, or 54 weeks postirradiation; and (4) sham-irradiation plus L-158,809 for 14, 28, or 54 weeks postirradiation. An additionalmore » group of rats (n = 20) received L-158,809 before, during, and for 5 weeks postirradiation, after which they received normal drinking water up to 28 weeks postirradiation. Results: Administration of L-158,809 before, during, and for 28 or 54 weeks after fractionated WBI prevented or ameliorated the radiation-induced cognitive impairment observed 26 and 52 weeks postirradiation. Moreover, giving L-158,809 before, during, and for only 5 weeks postirradiation ameliorated the significant cognitive impairment observed 26 weeks postirradiation. These radiation-induced cognitive impairments occurred without any changes in brain metabolites or gross histologic changes assessed at 28 and 54 weeks postirradiation, respectively. Conclusions: Administering L-158,809 before, during, and after fractionated WBI can prevent or ameliorate the chronic, progressive, cognitive impairment observed in rats at 26 and 52 weeks postirradiation. These findings offer the promise of improving the quality of life for brain tumor patients.« less
High Level Design for Distributed Application Instrumentation.
1992-09-01
true branch ,TRUE DD-path5 FALSE false branch SEXI .__T DECISION-TO-DECISION PATH EXAMPLE FIGURE 2 4.0 AUTOMATED TESTING TOOLS Manually testing...I I x l- I lE-4 I XX I WI I x I IH I E- 1>4 I IZI X XX I Z ~It X X XX w 1 0 1 XXX x X Il- I E-4l XXW x x X I c)l I XX x x X I4 l l XXX I X x ( l...I I lC1l XXX x X III xXX X x x X I WI rXX X X x X I I II xXX X X x I i 111 I 1W 0~l XXX X X XX X I1 10.01 XXXX x X XX x I HI0 IW 01 XXXX x Xx XX X X I
Blank, Simon; Etzold, Stefanie; Darsow, Ulf; Schiener, Maximilian; Eberlein, Bernadette; Russkamp, Dennis; Wolf, Sara; Graessel, Anke; Biedermann, Tilo; Ollert, Markus; Schmidt-Weber, Carsten B.
2017-01-01
ABSTRACT Allergen-specific immunotherapy is the only curative treatment of honeybee venom (HBV) allergy, which is able to protect against further anaphylactic sting reactions. Recent analyses on a molecular level have demonstrated that HBV represents a complex allergen source that contains more relevant major allergens than formerly anticipated. Moreover, allergic patients show very diverse sensitization profiles with the different allergens. HBV-specific immunotherapy is conducted with HBV extracts which are derived from pure venom. The allergen content of these therapeutic extracts might differ due to natural variations of the source material or different down-stream processing strategies of the manufacturers. Since variations of the allergen content of therapeutic HBV extracts might be associated with therapeutic failure, we adressed the component-resolved allergen composition of different therapeutic grade HBV extracts which are approved for immunotherapy in numerous countries. The extracts were analyzed for their content of the major allergens Api m 1, Api m 2, Api m 3, Api m 5 and Api m 10. Using allergen-specific antibodies we were able to demonstrate the underrepresentation of relevant major allergens such as Api m 3, Api m 5 and Api m 10 in particular therapeutic extracts. Taken together, standardization of therapeutic extracts by determination of the total allergenic potency might imply the intrinsic pitfall of losing information about particular major allergens. Moreover, the variable allergen composition of different therapeutic HBV extracts might have an impact on therapy outcome and the clinical management of HBV-allergic patients with specific IgE to particular allergens. PMID:28494206
Zelt, Ronald B.; Hobza, Christopher M.; Burton, Bethany L.; Schaepe, Nathaniel J.; Piatak, Nadine
2017-11-16
Sediment management is a challenge faced by reservoir managers who have several potential options, including dredging, for mitigation of storage capacity lost to sedimentation. As sediment is removed from reservoir storage, potential use of the sediment for socioeconomic or ecological benefit could potentially defray some costs of its removal. Rivers that transport a sandy sediment load will deposit the sand load along a reservoir-headwaters reach where the current of the river slackens progressively as its bed approaches and then descends below the reservoir water level. Given a rare combination of factors, a reservoir deposit of alluvial sand has potential to be suitable for use as proppant for hydraulic fracturing in unconventional oil and gas development. In 2015, the U.S. Geological Survey began a program of researching potential sources of proppant sand from reservoirs, with an initial focus on the Missouri River subbasins that receive sand loads from the Nebraska Sand Hills. This report documents the methods and results of assessments of the suitability of river delta sediment as proppant for a pilot study area in the delta headwaters of Lewis and Clark Lake, Nebraska and South Dakota. Results from surface-geophysical surveys of electrical resistivity guided borings to collect 3.7-meter long cores at 25 sites on delta sandbars using the direct-push method to recover duplicate, 3.8-centimeter-diameter cores in April 2015. In addition, the U.S. Geological Survey collected samples of upstream sand sources in the lower Niobrara River valley.At the laboratory, samples were dried, weighed, washed, dried, and weighed again. Exploratory analysis of natural sand for determining its suitability as a proppant involved application of a modified subset of the standard protocols known as American Petroleum Institute (API) Recommended Practice (RP) 19C. The RP19C methods were not intended for exploration-stage evaluation of raw materials. Results for the washed samples are not directly applicable to evaluations of suitability for use as fracture sand because, except for particle-size distribution, the API-recommended practices for assessing proppant properties (sphericity, roundness, bulk density, and crush resistance) require testing of specific proppant size classes. An optical imaging particle-size analyzer was used to make measurements of particle-size distribution and particle shape. Measured samples were sieved to separate the dominant-size fraction, and the separated subsample was further tested for roundness, sphericity, bulk density, and crush resistance.For the bulk washed samples collected from the Missouri River delta, the geometric mean size averaged 0.27 millimeters (mm), 80 percent of the samples were predominantly sand in the API 40/70 size class, and 17 percent were predominantly sand in the API 70/140 size class. Distributions of geometric mean size among the four sandbar complexes were similar, but samples collected from sandbar complex B were slightly coarser sand than those from the other three complexes. The average geometric mean sizes among the four sandbar complexes ranged only from 0.26 to 0.30 mm. For 22 main-stem sampling locations along the lower Niobrara River, geometric mean size averaged 0.26 mm, an average of 61 percent was sand in the API 40/70 size class, and 28 percent was sand in the API 70/140 size class. Average composition for lower Niobrara River samples was 48 percent medium sand, 37 percent fine sand, and about 7 percent each very fine sand and coarse sand fractions. On average, samples were moderately well sorted.Particle shape and strength were assessed for the dominant-size class of each sample. For proppant strength, crush resistance was tested at a predetermined level of stress (34.5 megapascals [MPa], or 5,000 pounds-force per square inch). To meet the API minimum requirement for proppant, after the crush test not more than 10 percent of the tested sample should be finer than the precrush dominant-size class. For particle shape, all samples surpassed the recommended minimum criteria for sphericity and roundness, with most samples being well-rounded. For proppant strength, of 57 crush-resistance tested Missouri River delta samples of 40/70-sized sand, 23 (40 percent) were interpreted as meeting the minimum criterion at 34.5 MPa, or 5,000 pounds-force per square inch. Of 12 tested samples of 70/140-sized sand, 9 (75 percent) of the Missouri River delta samples had less than 10 percent fines by volume following crush testing, achieving the minimum criterion at 34.5 MPa. Crush resistance for delta samples was strongest at sandbar complex A, where 67 percent of tested samples met the 10-percent fines criterion at the 34.5-MPa threshold. This frequency was higher than was indicated by samples from sandbar complexes B, C, and D that had rates of 50, 46, and 42 percent, respectively. The group of sandbar complex A samples also contained the largest percentages of samples dominated by the API 70/140 size class, which overall had a higher percentage of samples meeting the minimum criterion compared to samples dominated by coarser size classes; however, samples from sandbar complex A that had the API 40/70 size class tested also had a higher rate for meeting the minimum criterion (57 percent) than did samples from sandbar complexes B, C, and D (50, 43, and 40 percent, respectively). For samples collected along the lower Niobrara River, of the 25 tested samples of 40/70-sized sand, 9 samples passed the API minimum criterion at 34.5 MPa, but only 3 samples passed the more-stringent criterion of 8 percent postcrush fines. All four tested samples of 70/140 sand passed the minimum criterion at 34.5 MPa, with postcrush fines percentage of at most 4.1 percent.For two reaches of the lower Niobrara River, where hydraulic sorting was energized artificially by the hydraulic head drop at and immediately downstream from Spencer Dam, suitability of channel deposits for potential use as fracture sand was confirmed by test results. All reach A washed samples were well-rounded and had sphericity scores above 0.65, and samples for 80 percent of sampled locations met the crush-resistance criterion at the 34.5-MPa stress level. A conservative lower-bound estimate of sand volume in the reach A deposits was about 86,000 cubic meters. All reach B samples were well-rounded but sphericity averaged 0.63, a little less than the average for upstream reaches A and SP. All four samples tested passed the crush-resistance test at 34.5 MPa. Of three reach B sandbars, two had no more than 3 percent fines after the crush test, surpassing more stringent criteria for crush resistance that accept a maximum of 6 percent fines following the crush test for the API 70/140 size class.Relative to the crush-resistance test results for the API 40/70 size fraction of two samples of mine output from Loup River settling-basin dredge spoils near Genoa, Nebr., four of five reach A sample locations compared favorably. The four samples had increases in fines composition of 1.6–5.9 percentage points, whereas fines in the two mine-output samples increased by an average 6.8 percentage points.
TES/Aura L3 Atmospheric Temperatures Daily V4 (TL3ATD)
Atmospheric Science Data Center
2018-05-09
... Platform: TES Aura L1B Nadir/Limb Spatial Coverage: 5.3 x 8.5 km nadir 37 x 23 km limb Spatial ... 0.5 x 5 km nadir 2.3 x 23 km limb Temporal Coverage: 08/22/2004 - present Temporal Resolution: ...
L929 cell cytotoxicity associated with experimental and commercial dental flosses
NASA Astrophysics Data System (ADS)
Tua-ngam, P.; Supanitayanon, L.; Dechkunakorn, S.; Anuwongnukroh, N.; Srikhirin, T.; Roongrujimek, P.
2017-11-01
This aim of the study was to investigate the cytotoxicity of two commercial and two experimental dental flosses. Two commercial, Oral B® Essential Floss (nylon-waxed) and Thai Silk Floss (silk-waxed), and two experimental, Floss X (nylon-waxed) and Floss Xu (nylon-unwaxed) dental flosses were used. The cytotoxic assay was performed by using cell cultures (L929) which were subjected to cell viability test with methyl-tetrazolium. Each floss specimen (0.4 g) was placed in 1 ml of Minimum Essential Medium at 37°C with 5% CO2 at 100% humidity in an incubator for 24 hours. After incubation, the cell mitochondrial activity was evaluated for detecting viable cells using optical density as per the guidelines of ISO 10993-5:2009(E). Cytotoxic effects were evaluated by measuring percentage of cell viability at 3 points of time- 5 mins, 30 mins, and 1 hr. The results showed that two commercial dental flosses and Floss X had cell viability about 90% at the three time points; however, the experimental Floss Xu presented 80% cell viability at 5 min and <70% cell viability at 30 min and 1 hr. The results concluded that the commercial dental flosses and the experimental dental floss with wax tested in this study were acceptable for clinical use.
Computer Implementation of the Bounding Surface Plasticity Model for Cohesive Soils.
1983-12-01
Contract # DACA 39-79-M-0059), the Civil Engineering Laboratory, Naval Construction Battalion Center (Re: Orders N62583-80-M-R478, N62583-81-M- R320, N62#74...correspondinga a expression in the equation of "Modification 5" (Section 1) is treated in a similar fashion. In general, this arbitrary action does not...Contract # DACA 39-79-M-0059), April 1980. 3. Dafalias, Y.F., L.R. Herrmann and J.S. DeNatale, "Prediction of the Response of the Natural Clays X and Y
2012-02-21
Summary of Proposed Additive Packages for API /IP 1581 4th Edition ...................................... 4 Table 2. Summary of DoD Test Results...15 Table 8. ISO 4406 Cleanliness Codes for the API /IP 1581 5th Edition...Improver WSIM Water Separation Index Measure NSN National Stock Number API American Petroleum Institute DESC Defense Energy Support Center DOE Design of
30 CFR 250.920 - What are the MMS requirements for assessment of fixed platforms?
Code of Federal Regulations, 2011 CFR
2011-07-01
.... Assessment categories are defined in API RP 2A-WSD, Section 17.3. If MMS objects to the assessment category... more restrictive level (see Sections 17.2.1 through 17.2.5 of API RP 2A-WSD for a description of... assessment process of API RP 2A-WSD. You must submit applications for your mitigation actions (e.g., repair...
[Determination of protopine in Corydalis racemose by HPLC].
Jiang, Xiazhi; Ye, Jinxia; Zeng, Jianwei; Zou, Xiuhong; Wu, Jinzhong
2010-09-01
To develop a HPLC method for determining the content of protopine in Corydalis racemose. Analysis was performed on a Gemini C18 column (4.6 mm x 250 mm, 5 microm) eluted with acetonitrile-water containing 0.8% triethylamine and 3% acetic acid acetum (20:80) as the mobile phase. The flow rate was 1.0 mL x min(-1). The detection wavelength was 289 nm. The average content of protopine in Herb of Racemose Corydalis was 0.905%. The calibration curve of protopine was linear between 0.124-1.36 microg (r = 0.9999). The average recovery was 98.49% with RSD 1.9%. This method is simple, reproducible and can be used to determine the content of protopine in C. racemose.
Ohata, Masaki; Kidokoro, Toshihiro; Hioki, Akiharu
2012-01-01
The stability of Hg in an acrylonitrile-butadiene-styrene disk certified reference material (ABS disk CRM, NMIJ CRM 8116-a) during measurements by wavelength dispersion X-ray fluorescence (WD-XRF) analysis was evaluated in this study. The XRF intensities of Hg (L(α)) and Pb (L(α)) as well as the XRF intensity ratios of Hg (L(α))/Pb (L(α)) observed under different X-ray tube current conditions as well as their irradiation time were examined to evaluate the stability of Hg in the ABS disk CRM. The observed XRF intensities and the XRF intensity ratios for up to 32 h of measurements under 80 mA of X-ray tube current condition were constant, even though the surface of the ABS disk CRM was charred by the X-ray irradiation with high current for a long time. Moreover, the measurements on Hg and Pb in the charred disks by an energy dispersive XRF (ED-XRF) spectrometer showed constant XRF intensity ratios of Hg (L(α))/Pb (L(α)). From these results, Hg in the ABS disk CRM was evaluated to be sufficiently stable for XRF analysis.
Analysis of pollen load based on color, physicochemical composition and botanical source.
Modro, Anna F H; Silva, Izabel C; Luz, Cynthia F P; Message, Dejair
2009-06-01
Pollen load samples from 10 hives of Apis mellifera (L.) were analyzed based on their physicochemical composition and botanical source, considering color as a parameter for quality control. In seven samples it was possible to establish the occurrence of more than 80% of a single pollen type, characterizing them as unifloral but with protein content variation. One of the samples was exclusively composed of saprophytic fungi (Cladosporium sp.). Comparing the mean results of the fungi loads with those of the nutritional components of pollen load, the former presented higher protein, mineral matter and dry matter and lower organic matter, ethereal extract and total carbohydrate values. The monochromatic samples met the physicochemical specifications regulating pollen load quality. The results showed that homogeneous coloration of the pollen load was not found to be a good indication of unifloral pollen, confirming the importance of physicochemical analysis and melissopalynological analysis for characterization of the quality of commercial pollen load.
Mechanism of UCH-L5 Activation and Inhibition by DEUBAD Domains in RPN13 and INO80G
Sahtoe, Danny D.; van Dijk, Willem J.; El Oualid, Farid; Ekkebus, Reggy; Ovaa, Huib; Sixma, Titia K.
2015-01-01
Summary Deubiquitinating enzymes (DUBs) control vital processes in eukaryotes by hydrolyzing ubiquitin adducts. Their activities are tightly regulated, but the mechanisms remain elusive. In particular, the DUB UCH-L5 can be either activated or inhibited by conserved regulatory proteins RPN13 and INO80G, respectively. Here we show how the DEUBAD domain in RPN13 activates UCH-L5 by positioning its C-terminal ULD domain and crossover loop to promote substrate binding and catalysis. The related DEUBAD domain in INO80G inhibits UCH-L5 by exploiting similar structural elements in UCH-L5 to promote a radically different conformation, and employs molecular mimicry to block ubiquitin docking. In this process, large conformational changes create small but highly specific interfaces that mediate activity modulation of UCH-L5 by altering the affinity for substrates. Our results establish how related domains can exploit enzyme conformational plasticity to allosterically regulate DUB activity. These allosteric sites may present novel insights for pharmaceutical intervention in DUB activity. PMID:25702870
NASA Astrophysics Data System (ADS)
Hsu, P. C.; Hsu, H. H.
2016-12-01
Changes in extratropical disturbance behavior could play an important role in climate dynamics and be responsible for a part of climate-related damage. However, robust observational evidence for long-term trends in the activity is still lacking, and understanding of how it is linked with climate phenomena is limited. In this study, we define an accumulated perturbation index (API) to quantify the variation in some scalar quantities of atmospheric disturbances. API measures the areas (e.g., % of total surface area of Earth) where a certain perturbation quantity exceeds the long-term mean value plus 0.5 standard deviations. This index reflects more realistically the ensemble impacts of a climate perturbation and/or trend (such as global warming and ENSO) on the extratropical disturbances, even though its impact on different regions might vary from year to year due to stochastic processes. API represents an integrated activity of extratropical disturbances at a given time relative to a long time span. API is calculated for the 5-day running mean and 10-30-day stream function fluctuations during DJF and JJA. The analysis reveals an increasing trend in API and variance of stream function, especially in the Southern Hemisphere. The findings suggest that atmospheric extratropical disturbances have strengthened in widening areas during the past six decades, even though there might not be robust trends in wave activity at regional scales. Whether the observed trends in API are associated with certain climate patterns is under investigation. Impact of global warming is likely one of the major sources for the increasing activity. The future change in API under global warming scenarios will be further studied by analyzing the projection of the CMIP5 models.
Lukschal, Anna; Wallmann, Julia; Bublin, Merima; Hofstetter, Gerlinde; Mothes-Luksch, Nadine; Breiteneder, Heimo; Pali-Schöll, Isabella; Jensen-Jarolim, Erika
2016-03-01
In the celery-mugwort-birch-spice syndrome, a significant proportion of IgE is directed against high molecular weight (HMW) glycoproteins, including the celery allergen Api g 5. BIP3, a monoclonal antibody originally raised against birch pollen, recognizes HMW allergens in birch and mugwort pollens, celery, and Apiaceae spices. Our aim was to generate mimotopes using BIP3 for immunization against the HMW allergens relevant in the celery-mugwort-birch-spice cross reactivity syndrome. Mimotopes were selected from a random-peptide display library by BIP3 and applied in IgE inhibition assays. The 3 phage clones with the highest inhibitory capacity were chosen for immunization of BALB/c mice. Mouse immune sera were tested for IgG binding to blotted birch pollen extract and used for inhibiting patients' IgE binding. Furthermore, sera were tested for binding to Api g 5, to horseradish peroxidase (HRP) as a second glycoprotein, or to non-glycosylated control allergen Phl p 5 in ELISA, and the specific Api g 5-specific IgG titers were determined. Three rounds of biopanning resulted in phage clones exhibiting 7 different sequences including 1 dominant, 1-6-cyclo-CHKLRCDKAIA. Three phage clones had the capacity to inhibit human IgE binding and induced IgG to the HMW antigen when used for immunizing BALB/c mice. The induced BIP3-mimotope IgG reached titers of 1:500 specifically to Api g 5, but hardly reacted to glycoprotein HRP, revealing a minor role of carbohydrates in their epitope. The mimotopes characterized in this study mimic the epitope of BIP3 relevant for Api g 5, one of the cross-reactive HMW allergens relevant in the celery-mugwort-birch-spice syndrome. BIP3 mimotopes may be used in the future for hyposensitization in this clinical syndrome by virtue of good and specific immunogenicity.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brzezinski, Krzysztof; Department of Crystallography, Faculty of Chemistry, A. Mickiewicz University, Poznan; Bujacz, Grzegorz
2008-07-01
Single crystals of recombinant S-adenosyl-l-homocysteine hydrolase from L. luteus in complex with adenosine diffract X-rays to 1.17 Å resolution at 100 K. The crystals are tetragonal, space group P4{sub 3}2{sub 1}2, and contain one copy of the dimeric enzyme in the asymmetric unit. By degrading S-adenosyl-l-homocysteine, which is a byproduct of S-adenosyl-l-methionine-dependent methylation reactions, S-adenosyl-l-homocysteine hydrolase (SAHase) acts as a regulator of cellular methylation processes. S-Adenosyl-l-homocysteine hydrolase from the leguminose plant yellow lupin (Lupinus luteus), LlSAHase, which is composed of 485 amino acids and has a molecular weight of 55 kDa, has been cloned, expressed in Escherichia coli and purified.more » Crystals of LlSAHase in complex with adenosine were obtained by the hanging-drop vapour-diffusion method using 20%(w/v) PEG 4000 and 10%(v/v) 2-propanol as precipitants in 0.1 M Tris–HCl buffer pH 8.0. The crystals were tetragonal, space group P4{sub 3}2{sub 1}2, with unit-cell parameters a = 122.4, c = 126.5 Å and contained two protein molecules in the asymmetric unit, corresponding to the functional dimeric form of the enzyme. Atomic resolution (1.17 Å) X-ray diffraction data have been collected using synchrotron radiation.« less
An improved method for high precision measurement of chromium isotopes using double spike MC-ICP-MS
NASA Astrophysics Data System (ADS)
Zhu, J.; Wu, G. L.; Wang, X.; Zhang, L. X.; Han, G.
2017-12-01
Chormium(Cr) isotopes have been used to trace pollution processes and reconstruct paleo-redox conditions. However, the precise determination of Cr isotopes has still been challenged due to difficulties in purifying Cr from samples with low Cr content and complex matrices. Here we report an improved four-step column chromatographic procedure to separate Cr from matrix elements. Firstly, Cr in sample solution was mixed with 50Cr-54Cr double spike (the optimized 54Crspike/52Crsample = 0.4 and (50Cr/54Cr)spike = 1.3:1) was completely converted into Cr (III) in 8.5mol/L HCl and loaded onto 2ml of AG50W-X8(200-400m) resin conditioned with 11 mol/L HCl. The 2.65ml of eluent was adjusted to 4.5ml of 6mol/L HCl and immediately loaded onto a Bio-Rad column filled with 2ml of AG1-X8 anion resin (100-200m). These two steps can remove at least 99% of Ca, Fe and most matrix elements. Secondly, the 7.5ml of eluent was dried down and dissolved in 0.1ml of 0.5mol/L HNO3.before adding 2ml 4mol/L HF, which was then loaded onto 1ml of AG1-X8 anion resin (100-200m) to remove Ti and V. Finally, sample was dissolved in 0.1ml of 0.5 mol/L HNO3 and oxidized by 0.5mL 0.2 mol/L (NH4)2S2O8 and 4.4mL H2O, which was then centrifuged to remove Mn oxide, and supernatant was loaded onto AG1-X8 resin to remove SO42-, Ni, Al, Na and some Mg using 8ml H2O and 3ml 2mol/L HCl. Cr was eluted by 2 mol/L HNO3 containing 5% H2O2 and the dried Cr was dissolved in 3% HNO3for isotopic analysis. The total yield to Cr is great than 80% even for samples with low Cr content. Chromium isotopes was measured on a Neptune plus MC-ICP-MS in China University of Geosciences(Beijing). Using our improved method, the δ53/52CrSRM979 values of USGS reference materials BHVO-2, BCR-2 and SGR-1b are -0.12±0.06‰(n=15), -0.09±0.06‰ (n=5), and 0.30±0.06‰ (n=12), respectively, which agree well with previously reported values. The δ53/52CrSRM979 of carbonaceous shale CP0-1 and CP0-12 collected from Hubei, China are 2.05±0.08‰ (n=3) and 2.08±0.07‰ (n=3), respectively, identical to 2.17±0.08‰ and 2.14±0.08‰ determined at the Department of Geology, UIUC. This work was supported by the National Key Basic Research Program of China (2014CB238903) and the National Natural Science Foundation of China (41473028, 41273029).
Genetics Home Reference: Ohdo syndrome, Maat-Kievit-Brunner type
... inheritance is that fathers cannot pass X-linked traits to their sons. Related Information What does it ... should consult with a qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map ...
Genetics Home Reference: SYNGAP1-related intellectual disability
... TK, Ozkan ED, Shi Y, Reish NJ, Almonte AG, Miller BH, Wiltgen BJ, Miller CA, Xu X, ... qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map Subscribe Customer Support USA. ...
Liang, Dandan; Xing, Fuguo; Selvaraj, Jonathan Nimal; Liu, Xiao; Wang, Limin; Hua, Huijuan; Zhou, Lu; Zhao, Yueju; Wang, Yan; Liu, Yang
2015-12-01
In order to reveal the inhibitory effects of cinnamaldehyde, citral, and eugenol on aflatoxin biosynthesis, the expression levels of 5 key aflatoxin biosynthetic genes were evaluated by real-time PCR. Aspergillus flavus growth and AFB1 production were completely inhibited by 0.80 mmol/L of cinnamaldehyde and 2.80 mmol/L of citral. However, at lower concentration, cinnamaldehyde (0.40 mmol/L), eugenol (0.80 mmol/L), and citral (0.56 mmol/L) significantly reduced AFB1 production with inhibition rate of 68.9%, 95.4%, and 41.8%, respectively, while no effect on fungal growth. Real-time PCR showed that the expressions of aflR, aflT, aflD, aflM, and aflP were down-regulated by cinnamaldehyde (0.40 mmol/L), eugenol (0.80 mmol/L), and citral (0.56 mmol/L). In the presence of cinnamaldehyde, AflM was highly down-regulated (average of 5963 folds), followed by aflP, aflR, aflD, and aflT with the average folds of 55, 18, 6.5, and 5.8, respectively. With 0.80 mmol/L of eugenol, aflP was highly down-regulated (average of 2061-folds), followed by aflM, aflR, aflD, and aflT with average of 138-, 15-, 5.2-, and 4.8-folds reduction, respectively. With 0.56 mmol/L of citral, aflT was completely inhibited, followed by aflM, aflP, aflR, and aflD with average of 257-, 29-, 3.5-, and 2.5-folds reduction, respectively. These results suggest that the reduction in AFB1 production by cinnamaldehyde, eugenol, and citral at low concentration may be due to the down-regulations of the transcription level of aflatoxin biosynthetic genes. Cinnamaldehyde and eugenol may be employed successfully as a good candidate in controlling of toxigenic fungi and subsequently contamination with aflatoxins in practice. © 2015 Institute of Food Technologists®
Handbook for Sampling and Sample Preservation of Water and Wastewater
1992-05-01
integers from 1 to N. N E Xi = XI1 + X 2 + X 3 . ..... + XN i=l 1 In the above example (from Table 4.1), X1 = 35.8, X2 = 33.0, ... , XN = X52 32.4; N E...41e 0 b10) -4 r- -C) a) 5l %Dt C) ON qc -0 Cl qtr C -4 %D cvj qw a) C )L- L~~~J enC- ..4 m~a CV) .4 c P.. .4 cnm0 q5C) )n me .-4C) - (J 1 () e U m. 0-4...X(l) = X = 35.8, X(2) = X2 = 33.0,..., X(52) = X52 = 32.4. X(t) is the linear trend. X’(t) is the random component. In this case, the trend can be
NASA Astrophysics Data System (ADS)
Mann, Christopher; Narasimhamurthi, Natarajan
1998-08-01
This paper discusses a specific implementation of a web and complement based simulation systems. The overall simulation container is implemented within a web page viewed with Microsoft's Internet Explorer 4.0 web browser. Microsoft's ActiveX/Distributed Component Object Model object interfaces are used in conjunction with the Microsoft DirectX graphics APIs to provide visualization functionality for the simulation. The MathWorks' Matlab computer aided control system design program is used as an ActiveX automation server to provide the compute engine for the simulations.
Masaki, S; Sugimori, G; Okamoto, A; Imose, J; Hayashi, Y
1991-01-01
The effects of Tween 80 supplementation of liquid culture medium on the formation of the superficial L1 layer of the Mycobacterium avium-Mycobacterium intracellulare complex (MAC) were examined by serological and scanning electron microscopic experiments. Specific antiserum to the glycopeptidolipids on the L1 layer of M. avium S-139, made in a rabbit, was used for seroagglutination reactions with antigens prepared from strain S-139 grown in medium supplemented with various levels of Tween 80 (0, 0.05, 0.5, 5, and 50 mg/ml). The agglutination titers gradually decreased as the concentration of Tween 80 rose. Scanning electron microscopy showed that the fibrillar materials consisting mainly of glycopeptidolipids on the L1 layer of strain S-139 also disappeared with increases in the concentration of Tween 80. In addition, there was no obvious correlation between (i) the plasmid DNAs and serotypes of MAC and (ii) formation of the L1 layer of MAC. It is therefore concluded that Tween 80 used to supplement liquid culture medium affects formation of the L1 layer, which has been considered to be one of the pathogenic factors of MAC. Images PMID:1885740
Pollen collection and honey bee forager distribution in cantaloupe
USDA-ARS?s Scientific Manuscript database
Honey bee (Apis mellifera, L.) pollen collection and forager distribution were examined during the summer of 2002 in a cantaloupe (Cucumis melo, L., Cruiser cv.) field provided with plastic mulch and drip irrigation. The experimental site was located near the INIFAP Campo Experimental La Laguna, Ma...
Supercritical fluids crystallization of budesonide and flunisolide.
Velaga, Sitaram P; Berger, Rolf; Carlfors, Johan
2002-10-01
Budesonide and flunisolide anhydrate were crystallized using the solution enhanced dispersion by supercritical fluids (SEDS) technique. The aim was to investigate the possibility of preparing different pure polymorphs. 0.25% w/v solutions of each drug were prepared from acetone and methanol. Operating conditions were 40-80 degrees C and 80-200 bars. The flow rate of drug solution was 0.3 mL/min and that of CO2 was 9-25 mL/min. Sample characterizations included differential scanning calorimetry, X-ray powder diffraction, variable temperature X-ray diffraction, scanning electron microscopy, and solubility studies. The particle morphology of budesonide was dependent on the nature of the solvent. SEDS processing of flunisolide with acetone at 100 bars resulted in the formation of polymorphic mixtures at 80 degrees C and a new polymorph III at 60 C and 40 degrees C. With methanol at 100 bars another new polymorph IV was formed with different particle morphology at 80 degrees C and a polymorphic mixture at 60 degrees C. Using the SEDS, microparticles of crystalline budesonide were prepared and new polymorphs of flunisolide were produced. Particle characteristics were controlled by the temperature, pressure and relative flow rates of drug solution and CO2.
Surfactant-enhanced anaerobic acidogenesis of Canna indica L. by rumen cultures.
Yue, Zheng-Bo; Yu, Han-Qing; Hu, Zhen-Hu; Harada, Hideki; Li, Yu-You
2008-06-01
Polyoxyethylene sorbitan monoolate (Tween 80) was used to enhance the anaerobic acidogenesis of Canna indica L. (canna) by rumen culture in this study. Dose of Tween 80 at 1 ml/l enhanced the volatile fatty acids (VFA) production from the acidogenesis of canna compared to the control. However, Tween 80 at higher dosages than 5 ml/l inhibited the rumen microbial activity and reduced the VFA yield. Response surface methodology was successfully used to optimize the VFA yield. A maximum of VFA yield of 0.147 g/g total solids (TS) added was obtained at canna and Tween 80 concentrations of 6.3g TS/l and 2.0 ml/l, respectively. Dosage of Tween 80 at 1-3.75 ml/l reduced the unproductive adsorption of microbes or enzymes on the lignin part in canna and increased microbial activity. A high VFA production was achieved from canna presoaked with Tween 80, suggesting that the structure of canna was disrupted by Tween 80.
Mullan, B F; Madsen, M T; Messerle, L; Kolesnichenko, V; Kruger, J
2000-04-01
The purpose of this study was to examine the radiologic attenuation properties of the parent cluster compounds, particularly attenuation as a function of discrete photon energy, before investigating ligand substitutions, which are necessary to improve cluster biocompatibility and to impart desirable physicochemical properties. The linear attenuation coefficients for solutions of the cluster compounds Ta6Br14, K8Ta6O19, and (H3O)2W6Cl14 were determined at 60, 80, 103, 122, and 140 keV from gamma-ray transmission measurements with americium-241, xenon-133, gadolinium-153, cobalt-57, and technetium-99m radioactive sources. Transmission measurements were obtained for a fixed time interval that ensured a statistically accurate count distribution exceeding 20,000 counts through the sample for each trial. On a strictly mole per liter basis, a 0.075 mol/L aqueous solution of K8Ta6O19 showed 1.08 times the attenuation of 0.063 mol/L aqueous iohexol at 60 keV and 3.30 times the attenuation at 80 keV. Similarly, a 0.05 mol/L methanolic solution of (H3O)2W6Cl4 showed 0.96 times (96%) the attenuation of 0.063 mol/L aqueous iohexol at 60 keV but 3.09 times the attenuation of the iohexol solution at 80 keV. Attenuations of 0.063 mol/L aqueous iohexol and 0.0125 mol/L Ta6Br14 (ie, at approximately one-fifth the iohexol concentration) were comparable at greater than 60 keV. These results confirm the theoretic potential for use of early transition metal cluster compounds as radiographic contrast agents. At higher x-ray energies, cluster compounds demonstrate multiplied x-ray attenuation relative to iodinated contrast agents.
Trajectory and Force Control of a Direct Drive Arm.
1986-09-01
NUMBER 7. AUTNOn(s) . CONTRACT OR GRANT Ity"s ) Chae H. An N00014-80- C -- . O , 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT...and notations are used: 0 -W, WV CW { o ][:][ x] c (2.9) Wd X C -" W, 0 -W, cy -"X C (2) _-t V Wz 0 C , 11 W, wy W, 0 0 0 112 112 W 0[ W. I0l (2.10) 0...theorem is used to compute the inertia terms translated to the center of mass of the load. C (2.16) )M Ji = P1- tn[(#TE)l -- (ZT)] (2.17) Then, the
da Silva Cruz, Aline; da Silva-Zacarin, Elaine C M; Bueno, Odair C; Malaspina, Osmar
2010-04-01
Morphological alterations, by means of histological and ultrastructural analysis, have been used to determine the effects of boric acid and fipronil on midgut tissues of honeybee worker, Apis mellifera L. larvae. In order to observe possible morphological alterations in the midgut, two groups of bioassays were performed. In the first one, the larvae were chronically treated with different concentrations of boric acid added to the food (1.0, 2.5 and 7.5 mg/g). In the second group, the larvae were fed with diets containing different concentrations of fipronil (0.1 and 1 microg/g) and compared with control groups without these chemical compounds. In the first bioassay, the larvae were collected on day 3 and in the second bioassay on day 4, when the mortality rate obtained in the toxicological bioassay was not very high. The larval midguts were removed and processed for morphological analyses using a light and transmission electron microscopy. We observed cytoplasmic vacuolizations, with the absence of autophagic vacuoles, and chromatinic compacting in most of the cells in the groups treated with pesticides. The morphological alterations were far greater in the larvae treated with boric acid than in the larvae treated with fipronil. Our data suggest that the midgut cell death observed was in response to boric acid and fipronil action. This study significantly improves the understanding of the toxicological effect of these insecticides from the ecotoxicological perspective.
Determination of blood cyanide by HPLC-MS.
Tracqui, A; Raul, J S; Géraut, A; Berthelon, L; Ludes, B
2002-04-01
An original high-performance liquid chromatographic-mass spectrometric (HPLC-MS) procedure was developed for the determination of cyanide (CN) in whole blood. After the addition of K13C15N as internal standard, blood was placed in a microdiffusion device, the inner well of which was filled with a mixture of taurine (50mM in water)/naphthalene-2,3-dicarboxaldehyde (NDA, 10mM in methanol)/methanol/ concentrated (approximately 20%) ammonia solution (25:25:45:5, v/v). Concentrated H2SO4 was added to the blood sample, and the microdiffusion chamber was sealed. After 30 min of gentle agitation, 2 microL of the contents of the inner vial were pipetted and directly injected onto a NovaPak C18 HPLC column. Separation was performed by a gradient of acetonitrile in 2mM NH4COOH, pH 3.0 buffer (35-80% in 10 min). Detection was done with a Perkin-Elmer Sciex API-100 mass analyzer with an ionspray interface, operated in the negative ionization mode. MS data were collected as either TIC or SIM at m/z (299 + 191) and (301 + 193) for the derivatives formed with CN and 13C15N, respectively. Inspired by previous works dealing with the complexation of CN by NDA + taurine to form a 1-cyano [f] benzoisoindole derivative analyzed by HPLC-fluorimetry, this method appears simple, rapid, and extremely specific. Limits of detection and quantitation for blood CN are 5 and 15 ng/mL, respectively. The use of 13C15N as internal standard allows the quantitation of CN with elegance and accuracy in comparison with previously reported methods.
Improved extension of platelet storage in a polyolefin container with higher oxygen permeability.
Yuasa, Takeshi; Ohto, Hitoshi; Yasunaga, Reiko; Kai, Takanori; Shirahama, Noriaki; Ogata, Takashi
2004-07-01
This study evaluated a newly developed polyolefin bag, which has a 50%/m(2) higher oxygen permeability to extend the shelf-life of platelets. Single-donor aphaeresis platelets were pooled, separated equally into two bags, PO-80 (0.8 l capacity) and KBP-PO (1 l capacity) for control, and stored in plasma for up to 7 d. Platelet biochemical and functional parameters were monitored in bags containing high (4.2 x 10(11)/250 ml/bag, n = 9) and low (2.0 x 10(11)/200 ml/bag, n = 3) concentrations of platelets over the storage period. After 7 d of storage, the PO-80 bags containing high concentrations of platelets had a better pH (mean pH 6.74) than those stored in KBP-PO (pH 6.32, P < 0.01); none of the nine PO-80 bags with a high platelet concentration had a pH below 6.2, compared with four of nine controls (P < 0.05). Similarly, lactate values were 20.19 mmol/l and 28.09 mmol/l respectively (P < 0.05). Aerobic metabolism was maintained better with greater O(2) consumption and less lactate generation in high-platelet concentration PO-80 bags than in the control bags. A significant difference was also found in pH, pCO(2) and lactate levels between the two bags containing low concentrations of platelets during the 7-d period. The in vitro characteristics of platelets declined less over 7 d when stored in a higher oxygen permeable container than in a marketed bag.
Feng, Chengya; Gao, Jieying; Zhen, Qianna; Fan, Zimian; Zhu, Mingsong; Yang, Xiangchun; Ding, Min
2013-06-01
A high performance liquid chromatography-ultraviolet/fluorescence detection (HPLC-UV/FLD) with on-column derivatization was established to simultaneously determine tryptophan (Trp), kynurenine (Kyn), 5-hydroxyindole acetic acid (5-Hiaa) and kynurenic acid (Kyna). A Hypersil C-18 column (250 mm x 4.0 mm, 5 microm) was used for the analysis at 30 degrees C. The separation was carried out with the mobile phase consisting of 250 mmol/L zinc acetate (pH 5.5) and acetonitrile (95: 5, v/v) at a flow rate of 0.8 mL/min using 3-nitrotyrosine as internal standard (IS). The excitation (Ex) and emission (Em) wavelengths were set at 278 nm (lambda(ex))/343 nm (lambda(em)) for 5-Hiaa and 244 nm (lambda(ex))/400 nm (lambda(em)) for Kyna, while the wavelengths of ultraviolet detection were set at 360 nm for Kyn and IS, 302 nm for Trp. The recoveries were in the range of 91.62% to 114.17%. The linearities were from 2.50 micromol/L to 320.00 micromol/L for Trp, 0.32 micromol/L to 15.36 micromol/L for Kyn, 3.27 nmol/L to 104.60 nmol/L for 5-Hiaa, and 14.00 nmol/L to 464.80 nmol/L for Kyna. The detection limits were 0.078 micromol/L, 0.056 micromol/L, 0.690 nmol/L and 1.290 nmol/L for Trp, Kyn, 5-Hiaa, and Kyna, respectively. Thirty plasma samples of normal pregnant women and 28 plasma samples of healthy controls were tested, and the results exhibited that the concentrations of Trp, Kyn and Kyna in the plasma of the normal pregnant women were significantly different from those of the control group (all P < 0.01). The method is simple and sensitive with good reproducibility, and it is suitable for clinical measurements.
Cho, Jaehyun; Jeon, Ikseong; Kim, Seong Yun; Lim, Soonho; Jho, Jae Young
2017-08-23
A series of polyketone (PK) nanocomposite films with varying content of noncovalently functionalized graphene nanoplatelet with 1-aminopyrene (GNP/APy) is prepared by solution blending with a solvent of hexafluoro-2-propanol. GNP/APy, prepared by a facile method, can effectively induce specific interaction such as hydrogen bonding between the amine functional group of GNP/APy and the carbonyl functional group of the PK matrix. With comparison of GNP and GNP/Py as reference materials, intensive investigation on filler-matrix interaction is achieved. In addition, the dispersion state of the functionalized GNP (f-GNPs; GNP/Py and GNP/APy) in the PK matrix is analyzed by three-dimensional nondestructive X-ray microcomputed tomography, and the increased dispersion state of those fillers results in significant improvement in the water vapor transmission rate (WVTR). The enhancement in WVTR of the PK/GNP/APy nanocomposite film at 1 wt % loading of filler leads to a barrier performance approximately 2 times larger compared to that of PK/GNP nanocomposite film and an approximately 92% reduction in WVTR compared to the case of pristine PK film. We expect that this facile method of graphene functionalization to enhance graphene dispersibility as well as interfacial interaction with the polymer matrix will be widely utilized to expand the potential of graphene materials to barrier film applications.
Ananias, Karla Rubia; de Melo, Adriane Alexandre Machado; de Moura, Celso José
2013-01-01
The development of mold of environmental origin in honey affects its quality and leads to its deterioration, so yeasts and molds counts have been used as an important indicator of hygiene levels during its processing, transportation and storage. The aim of this study was to evaluate the levels of yeasts and molds contamination and their correlation with moisture and acidity levels in Apis mellifera L. honey from central Brazil. In 20% of the samples, the yeasts and molds counts exceeded the limit established by legislation for the marketing of honey in the MERCOSUR, while 42.8% and 5.7% presented above-standard acidity and moisture levels, respectively. Although samples showed yeasts and molds counts over 1.0 × 102 UFC.g−1, there was no correlation between moisture content and the number of microorganisms, since, in part of the samples with above-standard counts, the moisture level was below 20%. In some samples the acidity level was higher than that established by legislation, but only one sample presented a yeasts and molds count above the limit established by MERCOSUR, which would suggest the influence of the floral source on this parameter. In general, of the 35 samples analyzed, the quality was considered inadequate in 45.7% of cases. PMID:24516434
Ananias, Karla Rubia; de Melo, Adriane Alexandre Machado; de Moura, Celso José
2013-01-01
The development of mold of environmental origin in honey affects its quality and leads to its deterioration, so yeasts and molds counts have been used as an important indicator of hygiene levels during its processing, transportation and storage. The aim of this study was to evaluate the levels of yeasts and molds contamination and their correlation with moisture and acidity levels in Apis mellifera L. honey from central Brazil. In 20% of the samples, the yeasts and molds counts exceeded the limit established by legislation for the marketing of honey in the MERCOSUR, while 42.8% and 5.7% presented above-standard acidity and moisture levels, respectively. Although samples showed yeasts and molds counts over 1.0 × 10(2) UFC.g(-1), there was no correlation between moisture content and the number of microorganisms, since, in part of the samples with above-standard counts, the moisture level was below 20%. In some samples the acidity level was higher than that established by legislation, but only one sample presented a yeasts and molds count above the limit established by MERCOSUR, which would suggest the influence of the floral source on this parameter. In general, of the 35 samples analyzed, the quality was considered inadequate in 45.7% of cases.
NASA Astrophysics Data System (ADS)
Jauhar, RO MU; Era, Paavai; Murugakoothan, P.
2018-05-01
Single crystal of imidazolium l-tartrate (IMLT), an organic nonlinear optical material, was successfully grown by slow evaporation solution growth technique (SEST) and Sankaranarayanan - Ramasamy (SR) method. The crystal structure and its lattice parameters were confirmed by single crystal X-ray diffraction study. The IMLT crystal belongs to monoclinic crystal system having a = 7.579(6) Å, b = 6.911(4) Å, c = 8.9281(5) Å, β = 101.45(8)°, volume, V = 458.33 Å3. The d33 coefficient found from the the piezoelectric study is 23 pC/N. The relative second harmonic generation efficiency of IMLT was found to be 3.16 times that of reference KDP material.
The Development of Microbial Fuel Cells (MFCs) By Haplusterts Soil (Samo - Thod Series)
NASA Astrophysics Data System (ADS)
Intaravicha, N.; Changjan, A.
2018-05-01
In this paper, we investigated on simultaneous electric energy production and organic matter was removed from synthetic wastewater by Microbial Fuel Cells (MFCs). Single chamber MFCs was made up by Haplusterts great group soil (Samo - Thod soil group) in trial design 3 x 3 factorial design in Completely Randomize Design (CRD) which 3 levels synthetic wastewater; 0, 200 and 400 mg/l of glucose and 3 levels of flooding time: 1, 3 and 5 days. The results showed the interaction significant with decreasing sugar from synthesis wastewater and Open Circuit Voltage (OCV). The maximum OCV of 200 and 400 mg/l of glucose in 3 flooding days were 131 and 142 mV and decreasing to 110 and 126 mV in 5 flooding days, respectively. The highest percent of decreased glucose approached to 80% in 5 flooding days of 0.4 g/l of glucose. The findings suggested that not only MFCs were a significantly to reduce organic matter in wastewater but also generated electric energy in the same time.
Atypical clinical presentation of meningococcal meningitis: a case report.
Izzo, Ilaria; Pileri, Paola; Merello, Maria; Gnesin, Paolo; Cogi, Enrico; Aggiusti, Carlo; Giacomelli, Laura; Ettori, Stefano; Colombini, Paolo; Collidá, Andrea
2016-09-01
A young woman was examined in the Emergency Department for fever, pharyngitis and widespread petechial rash. Physical examination, including neurological evaluation, did not show any other abnormalities. Chest X-ray was negative. Blood exams showed leukocytosis and CPR 20 mg/dL (nv<0.5 mg/dL). On the basis of these results and petechial rash evidence, lumbar puncture was performed. CSF was opalescent; physico-chemical examination showed: total proteins 2.8 (nv 0.15-0.45), glucose 5 (nv 59-80), WBC 7600/μL (nv 0-4/ μL). In the hypothesis of meningococcal meningitis, antimicrobial therapy was started. Blood and cerebrospinal fluid cultures were positive for N. meningitidis. During the first hours the patient experienced hallucinations and mild psychomotor agitation, making a spontaneous recovery. A brain MRI showed minimal extra-axial inflammatory exudates. She was discharged after 10 days in good condition. We underline the need to consider meningococcal meningitis diagnosis when any suggestive symptom or sign is present, even in the absence of the classic meningitis triad, to obtain earlier diagnosis and an improved prognosis.
Furuhata, Katsunori; Kato, Yuko; Goto, Keiichi; Saitou, Keiko; Sugiyama, Jun-Ichi; Hara, Motonobu; Fukuyama, Masahumi
2007-06-01
Twenty-five yellow chromogenic strains isolated from hospital tap water samples collected nationwide were identified by partial 16S rDNA sequencing. In addition, the chlorine resistance of the isolates was experimentally investigated. The results showed that of the strains tested, 12 strains (48.0%) were Sphingomonas ursincola/natatoria, which was most frequently identified, followed by 2 strains (8.0%) of Mycobacterium frederiksbergense and 1 strain (4.0%) each of Sphingomonas adhaesiva, Sphingopyxis witflariensis and Porphyrobacter donghaensis. The other strains were not identified clearly but they belonged to the order of Alphaproteobacteria. On the other hand, the identification results by sequencing and biochemical property testing were not consistent in any of the strains, showing that it was difficult to accurately identify the yellow chromogenic bacteria in tap water based on only their biochemical properties. When the 25 isolates were exposed to 0.1 mg/l residual free chlorine for 1 minute, 22 isolates (88.0%) survived. When the CT (Concentration Time) value killing 99.99% of the bacteria was investigated in 6 of these survivors, M. frederiksbergense (Y-1 strain) was most resistant to chlorine with the CT value of 32 mg x min/l, followed by S. ursincola/natatoria (Y-7 strain) with the CT value of 3.3 mg x min/l. The CT values of Y-5 (Sphingomonas sp.), Y-27 (S. ursincola/natatoria) and Y-21 (Asticacaulis sp.) were within the range of 0.9-0.1 mg x min /l. Of the 6 strains, S. adhaesiva (Y-10) showed the weakest resistance with the CT value of 0.03 mg x min/l. It was clarified that most yellow chromogenic bacteria isolated from hospital tap water were Sphingomonas spp., and these bacteria were experimentally resistant to chlorine.
[Degradation kinetics of ozone oxidation on high concentration of humic substances].
Zheng, Ke; Zhou, Shao-Qi; Yang, Mei-Mei
2012-03-01
Humic substance oxidation (HS) degradation by ozone was kinetically investigated. The effects of O3 dosage, initial pH, temperature and initial concentration of HS were studied. Under the conditions of 3.46 g x h(-1) ozone dosage, 1 000 mg x L(-1) initial HS, 8.0 initial pH and 303 K temperature, the removal efficiencies of HS achieved 89.04% at 30 min. The empirical kinetic equation of ozonation degradation for landfill leachate under the conditions of 1.52-6.10 g x h(-1) ozone dosage, 250-1 000 mg x L(-1) initial HS, 2.0-10.0 initial pH, 283-323 K temperature fitted well with the experimental data (average relative error is 7.62%), with low activation energy E(a) = 1.43 x 10(4)J x mol(-1).
Ferrer, Ivet; Palatsi, Jordi; Campos, Elena; Flotats, Xavier
2010-10-01
Water hyacinth (Eichornia crassipes) is a fast growing aquatic plant which causes environmental problems in continental water bodies. Harvesting and handling this plant becomes an issue, and focus has been put on the research of treatment alternatives. Amongst others, energy production through biomethanation has been proposed. The aim of this study was to assess the anaerobic biodegradability of water hyacinth under mesophilic and thermophilic conditions. The effect of a thermal sludge pre-treatment at 80 degrees C was also evaluated. To this end, anaerobic biodegradability tests were carried out at 35 degrees C and 55 degrees C, with raw and pre-treated water hyacinth. According to the results, the thermal pre-treatment enhanced the solubilisation of water hyacinth (i.e. increase in the soluble to total chemical oxygen demand (COD)) from 4% to 12% after 30 min. However, no significant effect was observed on the methane yields (150-190 L CH(4)/kg volatile solids). Initial methane production rates for thermophilic treatments were two fold those of mesophilic ones (6-6.5L vs. 3-3.5 L CH(4)/kg COD x day). Thus, higher methane production rates might be expected from thermophilic reactors working at short retention times. The study of longer low temperature pre-treatments or pre-treatments at elevated temperatures coupled to thermophilic reactors should be considered in the future. (c) 2009 Elsevier Ltd. All rights reserved.
34 CFR 5.80 - Review of denial of a record.
Code of Federal Regulations, 2010 CFR
2010-07-01
... PURSUANT TO PUB. L. 90-23 (Eff. until 7-14-10) Administrative Review § 5.80 Review of denial of a record. This subpart provides for the review of a denial, pursuant to § 5.53, of a written request for... 34 Education 1 2010-07-01 2010-07-01 false Review of denial of a record. 5.80 Section 5.80...
Effect of administering black cumin (Nigella sativa) toward postpartum mice (MusMusculus L.)
NASA Astrophysics Data System (ADS)
Imelda, F.; Darti, N. A.
2018-03-01
The period of childbirth is a period for the health provider monitoring that less monitoring can cause the mother to suffer a variety of problemsandcomplications during childbirth such as post-partum infections. This type of research was an experimental group P0: control group, treatment groups by administering Nigella sativa P1:2.6mg/day, P2:3.9mg/day, P3:5.2mg/day, and P4:6.5mg/day, which each group 5 samples. The average amount of leukocytes after given Nigella sativa 2.6mg/day for seven days (P1) which was 7:10±0:57 (x103cells/mm3), and at least in female mice after given Nigella sativa 6.5mg/day for sevendays (P4) which was 6.62±0.52 (x103cells/mm3). The average amount lymphocytes after given Nigella sativa 2.6mg/day for seven days (P1) which was 63.40±4.77 (x103cells/mm3), and least in female mice after given Nigella sativa 3.9 mg/day for seven days (P3) which was 47.00±14:58 (x103cells/mm3). Amount of monocytes after given Nigella sativa 5.2mg/day for seven days (P3) which was 5.40±0.55 (x103cells/mm3), and least in female mice after given Nigella sativa 2.6mg/day for seven days (P1) which was 4.80±1.30 (x103cells/mm3).
Wright, Katherine E; Lyons, Thomas S; Navalta, James W
2013-05-01
The authors of this study examined the effects of muscle fatigue on balance indices and recovery time in recreationally trained individuals after incremental tests on a treadmill and a cycle ergometer. Sixteen participants (male N = 11, female N = 5) (mean age = 21.2 ± 2 years) completed this study. Balance measures were performed on a Biodex Balance System via the Dynamic Balance Test. Balance was measured pre-exercise, immediately post-exercise, and at 3-, 6-, 9-, 12-, 15-, 18-, and 21-min post-exercise. Immediately following the fatiguing treadmill test, balance increased significantly in the overall stability index (SI) (from 4.38 ± 2.48 to 6.09 ± 1.80) and the anterior/posterior index (API) (from 3.49 ± 2.18 to 5.28 ± 1.81) (p < 0.01). Immediately following the fatiguing cycle test, balance was not altered significantly in SI or API. Balance was not altered significantly for the medial/lateral index for either exercise test at any time point. Additionally, there were no significant differences in time to recovery. At 12-min post-exercise, all indices were below pre-exercise values, indicating that fatiguing exercise has a positive effect on balance over time. These results are consistent with previous research, suggesting that any effects of fatigue on balance are seen immediately and are diminished as time after exercise increases.
Hartmann, K; Ferk, G; North, T W; Pedersen, N C
1997-09-01
9-[(2R,5R-2,5-dihydro-5-phosphonomethoxy)-2-furanyl]adenine, or D4API, was tested in the feline immunodeficiency virus (FIV) infection model and found to be significantly more inhibitory in vitro than its parent compound 9-phosphonylmethoxethyl adenine (PMEA). Cytotoxicity was less than for PMEA or azidothymidine (AZT) for culture periods of 7 days, but more toxic after 10 days. D4API was rapidly absorbed by cats following subcutaneous inoculation, with a plasma half-life of less than 1 h after intravenous inoculation and between 2 and 3 h after subcutaneous injection. Peripheral blood mononuclear cells collected from cats given a single dose of D4API were refractory, however, to FIV infection in vitro for up to 24 h. Given its prolonged intracellular phase and high selectivity index, high dose D4API therapy was tested for its ability to abort an acute (i.e. 2 week) FIV infection. A divided daily dose of D4API, which was one-fourth the toxic dose and 125 times the concentration that would totally inhibit virus replication in vitro, completely abrogated the anticipated viremia and antibody responses. Unfortunately, a majority of treated/uninfected and treated/infected test cats died acutely of drug toxicity after 47 days of treatment. Toxicity in vivo mirrored what was observed in vitro, being precipitous and cumulative in nature. Toxic signs included widespread hepatic and lymphoid necrosis. A surviving treated/FIV infected cat remained healthy to day 175 when the study was terminated; antibodies appeared 2 months later than in untreated/infected cats and virus was only detectable at low levels on day 175. In contrast, untreated/infected cats were viremic and antibody positive from 3 to 4 weeks post-infection onwards. Therefore, it was possible to alter, but not abort, an early FIV infection with prolonged, high-dose D4API treatment.
MiR-224 expression increases radiation sensitivity of glioblastoma cells
DOE Office of Scientific and Technical Information (OSTI.GOV)
Upraity, Shailendra; Kazi, Sadaf; Padul, Vijay
Highlights: • MiR-224 expression in established glioblastoma cell lines and sporadic tumor tissues is low. • Exogenous miR-224 expression was found to increase radiation sensitivity of glioblastoma cells. • MiR-224 expression brought about 55–60% reduction in API5 expression levels. • Transfection with API5 siRNA increased radiation sensitivity of glioblastoma cells. • Low miR-224 and high API5 expression correlated with worse survival of GBM patients. - Abstract: Glioblastoma (GBM) is the most common and highly aggressive primary malignant brain tumor. The intrinsic resistance of this brain tumor limits the efficacy of administered treatment like radiation therapy. In the present study, effectmore » of miR-224 expression on growth characteristics of established GBM cell lines was analyzed. MiR-224 expression in the cell lines as well as in primary GBM tumor tissues was found to be low. Exogenous transient expression of miR-224 using either synthetic mimics or stable inducible expression using doxycycline inducible lentiviral vector carrying miR-224 gene, was found to bring about 30–55% reduction in clonogenic potential of U87 MG cells. MiR-224 expression reduced clonogenic potential of U87 MG cells by 85–90% on irradiation at a dose of 6 Gy, a dose that brought about 50% reduction in clonogenic potential in the absence of miR-224 expression. MiR-224 expression in glioblastoma cells resulted in 55–65% reduction in the expression levels of API5 gene, a known target of miR-224. Further, siRNA mediated down-regulation of API5 was also found to have radiation sensitizing effect on glioblastoma cell lines. Analysis of the Cancer Genome Atlas data showed lower miR-224 expression levels in male GBM patients to correlate with poorer survival. Higher expression levels of miR-224 target API5 also showed significant correlation with poorer survival of GBM patients. Up-regulation of miR-224 or down-regulation of its target API5 in combination with radiation therapy, therefore appear as promising options for the treatment of glioblastoma, which is refractory to the existing treatment strategies.« less
ChEMBL web services: streamlining access to drug discovery data and utilities
Davies, Mark; Nowotka, Michał; Papadatos, George; Dedman, Nathan; Gaulton, Anna; Atkinson, Francis; Bellis, Louisa; Overington, John P.
2015-01-01
ChEMBL is now a well-established resource in the fields of drug discovery and medicinal chemistry research. The ChEMBL database curates and stores standardized bioactivity, molecule, target and drug data extracted from multiple sources, including the primary medicinal chemistry literature. Programmatic access to ChEMBL data has been improved by a recent update to the ChEMBL web services (version 2.0.x, https://www.ebi.ac.uk/chembl/api/data/docs), which exposes significantly more data from the underlying database and introduces new functionality. To complement the data-focused services, a utility service (version 1.0.x, https://www.ebi.ac.uk/chembl/api/utils/docs), which provides RESTful access to commonly used cheminformatics methods, has also been concurrently developed. The ChEMBL web services can be used together or independently to build applications and data processing workflows relevant to drug discovery and chemical biology. PMID:25883136
Evaluating the Passivation of Corrosion of API-X100 Steel with Cyclic Voltammetry
NASA Astrophysics Data System (ADS)
Eliyan, Faysal Fayez; Alfantazi, Akram
2017-10-01
In this research, cyclic voltammetry, in oxygen-free low bicarbonate-carbonate solutions, was used to study the corrosion reactions of a high-strength steel, API-X100. With cycles of different scan ranges, the effects of cycling, transpassivation, and cathodic reduction on the electrochemistry of the passive films were analyzed. It was found that carbonate in higher concentrations reduces the anodic activity and the cathodic reactions of the surface. Bicarbonate in small concentrations in solutions that contained low carbonate concentrations catalyzed dissolution and disrupted the formation of the passive films, in reference to the measured anodic currents. From the experiments, there was electrochemical evidence that with more cycles, the passive films were growing thicker, the transpassivation deteriorated the passive films, and during the cathodic reduction, the dissolution was occurring at lower potentials to facilitate later the passivation at higher potentials.
Bartolomé, Carolina; Buendía, María; Benito, María; De la Rúa, Pilar; Ornosa, Concepción; Martín-Hernández, Raquel; Higes, Mariano; Maside, Xulio
2018-05-01
Trypanosomatids are highly prevalent pathogens of Hymenoptera; however, most molecular methods used to detect them in Apis and Bombus spp. do not allow the identification of the infecting species, which then becomes expensive and time consuming. To overcome this drawback, we developed a multiplex PCR protocol to readily identify in a single reaction the main trypanosomatids present in these hymenopterans (Lotmaria passim, Crithidia mellificae and Crithidia bombi), which will facilitate the study of their epidemiology and transmission dynamics. A battery of primers, designed to simultaneously amplify fragments of the RNA polymerase II large subunit (RPB1) of L. passim, the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) of C. mellificae and the DNA topoisomerase II (TOPII) of C. bombi, was tested for target specificity under single and mixed template conditions using DNA extracted from cell cultures (L. passim ATCC PRA403; C. mellificae ATCC 30254) and from a bumblebee specimen infected with C. bombi only (14_349). Once validated, the performance of the method was assessed using DNA extractions from seven Apis mellifera (Linnaeus, 1758) and five Bombus terrestris (Linnaeus, 1758) field samples infected with trypanosomatids whose identity had been previously determined by PCR-cloning and sequencing (P-C-S). The new method confirmed the results obtained by P-C-S: two of the honeybee samples were parasitized by L. passim, C. mellificae and C. bombi at the same time, whereas the other five were infected with L. passim only. The method confirmed the simultaneous presence of L. passim and C. mellificae in two B. terrestris, where these parasites had not previously been reported. Copyright © 2018 Elsevier Inc. All rights reserved.
Khattab, M M; Al-Hrasen, M N; El-Hadiyah, T M
2007-01-01
1. Both adenosine-5'-triphosphate (ATP) and diadenosine tetraphosphate (AP4A) produced a dose-dependent contraction of the isolated rat urinary bladder rings. AP(4)A dose-response curve was to the left of that of ATP, and maximum response was greater than that produced by ATP. 2. 8-cyclopentyl-1,3-dipropylxanthine (DPCPX), the A1-purinergic receptor blocker (0.01 mm) significantly inhibited the ATP- and AP4A-induced contractions at the whole dose range. The inhibition was between 31-41%, and 15-25% for ATP and AP4A respectively. 3. Pyridoxal phosphate 6-azophenyl-2',4'-disulphonic acid (PPADS), the P2X-purinoceptor antagonist (0.01 mm) potently inhibited the bladder contractions in response to ATP and AP4A by around 75-80%. 4. The nitric oxide (NO) precursor L-arginine reduced the bladder contractile response to ATP by about 22-41% and that of AP4A to a lesser extent by around 20-32%. 5. The nitric oxide synthase inhibitor, N(G)-nitro-L-arginine methyl ester (L-NAME, 0.1 mM), did not produce any significant effect on ATP except for a weak inhibition of about 14% at the lowest dose of ATP. The contractions in response to AP4A were only slightly reduced by L-NAME by about 20%. 6. In conclusion, the contractile response of the bladder to ATP and to the dinucleotide AP4A is mediated mainly through P2X-purinoceptors and A1-purinergic receptors. In the detrusor muscle, NO donation possesses an inhibitory effect on ATP-mediated contractility more than that produced by the dinucleotide AP4A.
Asou, H; Koike, M; Elstner, E; Cambell, M; Le, J; Uskokovic, M R; Kamada, N; Koeffler, H P
1998-10-01
We have studied the in vitro biological activities and mechanisms of action of 1,25-dihydroxyvitamin D3 (1,25D3) and nine potent 1,25D3 analogs on proliferation and differentiation of myeloid leukemia cell lines (HL-60, retinoic acid-resistant HL-60 [RA-res HL-60], NB4 and Kasumi-1). The common novel structural motiff for almost all the analogs included removal of C-19 (19-nor); each also had unsaturation of the side chain. All the compounds were potent; for example, the concentration of analogs producing a 50% clonal inhibition (ED50) ranged between 1 x 10(-9) to 4 x 10(-11) mol/L when using the HL-60 cell line. The most active compound [1, 25(OH)2-16,23E-diene-26-trifluoro-19-nor-cholecalciferol (Ro 25-9716)] had an ED50 of 4 x 10(-11) mol/L; in contrast, the 1,25D3 produced an ED50 of 10(-9) mol/L with the HL-60 target cells. Ro 25-9716 (10(-9) mol/L, 3 days) was a strong inducer of myeloid differentiation because it caused 92% of the HL-60 cells to express CD11b and 75% of these cells to reduce nitroblue tetrazolium (NBT). This compound (10(-8) mol/L, 4 days) also caused HL-60 cells to arrest in the G1 phase of the cell cycle (88% cells in G1 v 48% of the untreated control cells). The p27(kip-1), a cyclin-dependent kinase inhibitor which is important in blocking the cell cycle, was induced more quickly and potently by Ro 25-9716 (10(-7) mol/L, 0 to 5 days) than by 1,25D3, suggesting a possible mechanism by which these analogs inhibit proliferation of leukemic growth. The NB4 promyelocytic leukemia cells cultured with the Ro 25-9716 were also inhibited in their clonal proliferation (ED50, 5 x 10(-11) mol/L) and their expression of CD11b was enhanced (80% positive [10(-9) mol/L, 4 days] v 27% untreated NB4 cells). Moreover, the combination of Ro 25-9716 (10(-9) mol/L) and all-trans retinoic acid (ATRA, 10(-7) mol/L) induced 92% of the NB4 cells to reduce NBT, whereas only 26% of the cells became NBT positive after a similar exposure to the combination of 1,25D3 and ATRA. Surprisingly, Ro 25-9716 also inhibited the clonal growth of poorly differentiated leukemia cell lines (RA-res HL-60 [ED50, 4 x 10(-9) mol/L] and Kasumi-1 [ED50, 5 x 10(-10) mol/L]). For HL-60 cells, Ro 25-9716 markedly decreased the percent of the cells in S phase of the cell cycle and increased the expression of the cyclin-dependent kinase inhibitor, p27(kip-1). In summary, 19-nor vitamin D3 compounds strongly induced differentiation and inhibited clonal proliferation of various myeloid leukemia cell lines, suggesting a therapeutic niche for their use in myeloid leukemia.
Coformer screening using thermal analysis based on binary phase diagrams.
Yamashita, Hiroyuki; Hirakura, Yutaka; Yuda, Masamichi; Terada, Katsuhide
2014-08-01
The advent of cocrystals has demonstrated a growing need for efficient and comprehensive coformer screening in search of better development forms, including salt forms. Here, we investigated a coformer screening system for salts and cocrystals based on binary phase diagrams using thermal analysis and examined the effectiveness of the method. Indomethacin and tenoxicam were used as models of active pharmaceutical ingredients (APIs). Physical mixtures of an API and 42 kinds of coformers were analyzed using Differential Scanning Calorimetry (DSC) and X-ray DSC. We also conducted coformer screening using a conventional slurry method and compared these results with those from the thermal analysis method and previous studies. Compared with the slurry method, the thermal analysis method was a high-performance screening system, particularly for APIs with low solubility and/or propensity to form solvates. However, this method faced hurdles for screening coformers combined with an API in the presence of kinetic hindrance for salt or cocrystal formation during heating or if there is degradation near the metastable eutectic temperature. The thermal analysis and slurry methods are considered complementary to each other for coformer screening. Feasibility of the thermal analysis method in drug discovery practice is ensured given its small scale and high throughput.
Kaminska, E; Tarnacka, M; Wlodarczyk, P; Jurkiewicz, K; Kolodziejczyk, K; Dulski, M; Haznar-Garbacz, D; Hawelek, L; Kaminski, K; Wlodarczyk, A; Paluch, M
2015-08-03
Molecular dynamics of pure nifedipine and its solid dispersions with modified carbohydrates as well as the crystallization kinetics of active pharmaceutical ingredient (API) above and below the glass transition temperature were studied in detail by means of broadband dielectric spectroscopy (BDS), differential scanning calorimetry (DSC), and X-ray diffraction method. It was found that the activation barrier of crystallization increases in molecular dispersions composed of acetylated disaccharides, whereas it slightly decreases in those consisting of modified monocarbohydrates for the experiments carried out above the glass transition temperature. As shown by molecular dynamics simulations it can be related to the strength, character, and structure of intermolecular interactions between API and saccharides, which vary dependently on the excipient. Long-term physical stability studies showed that, in solid dispersions consisting of acetylated maltose and acetylated sucrose, the crystallization of nifedipine is dramatically slowed down, although it is still observable for a low concentration of excipients. With increasing content of modified carbohydrates, the crystallization of API becomes completely suppressed. This is most likely due to additional barriers relating to the intermolecular interactions and diffusion of nifedipine that must be overcome to trigger the crystallization process.
1980-12-01
ohms, 1/4 W, 5% R7 lOOK ohms, 1/4 W, 5% R8 50K ohms, 1/4 W, 5% R9 lOOK ohms, 1/4 W, 5% RIO 50K ohms, 1/4 W, 5% R11 100K ohms, 1/4 W, 5% R12 WOOK ohms, 1...AND-DOWN HEAD MOVEMENTS’/ C’ (DEEP BREATHING) ’,21X,lPE12.1) WRITE(3,3069) PF(6) TYPE 3069,PF(6) 3069 FORMAT(6X,’FACIAL C~ RIMACING ’,21X,lPE12.1
Honey Bees (Apis mellifera, L.) as Active Samplers of Airborne Particulate Matter.
Negri, Ilaria; Mavris, Christian; Di Prisco, Gennaro; Caprio, Emilio; Pellecchia, Marco
2015-01-01
Honey bees (Apis mellifera L.) are bioindicators of environmental pollution levels. During their wide-ranging foraging activity, these hymenopterans are exposed to pollutants, thus becoming a useful tool to trace the environmental contaminants as heavy metals, pesticides, radionuclides and volatile organic compounds. In the present work we demonstrate that bees can also be used as active samplers of airborne particulate matter. Worker bees were collected from hives located in a polluted postmining area in South West Sardinia (Italy) that is also exposed to dust emissions from industrial plants. The area is included in an official list of sites of national interest for environmental remediation, and has been characterized for the effects of pollutants on the health of the resident population. The head, wings, hind legs and alimentary canal of the bees were investigated with Scanning Electron Microscopy coupled with X-ray spectroscopy (SEM-EDX). The analyses pointed to specific morphological and chemical features of the particulate, and resulted into the identification of three categories of particles: industry-, postmining-, and soil-derived. With the exception of the gut, all the analyzed body districts displayed inorganic particles, mostly concentrated in specific areas of the body (i.e. along the costal margin of the fore wings, the medial plane of the head, and the inner surface of the hind legs). The role of both past mining activities and the industrial activity close to the study area as sources of the particulate matter is also discussed. We conclude that honey bees are able to collect samples of the main airborne particles emitted from different sources, therefore could be an ideal tool for monitoring such a kind of pollutants.
Honey Bees (Apis mellifera, L.) as Active Samplers of Airborne Particulate Matter
Di Prisco, Gennaro; Caprio, Emilio; Pellecchia, Marco
2015-01-01
Honey bees (Apis mellifera L.) are bioindicators of environmental pollution levels. During their wide-ranging foraging activity, these hymenopterans are exposed to pollutants, thus becoming a useful tool to trace the environmental contaminants as heavy metals, pesticides, radionuclides and volatile organic compounds. In the present work we demonstrate that bees can also be used as active samplers of airborne particulate matter. Worker bees were collected from hives located in a polluted postmining area in South West Sardinia (Italy) that is also exposed to dust emissions from industrial plants. The area is included in an official list of sites of national interest for environmental remediation, and has been characterized for the effects of pollutants on the health of the resident population. The head, wings, hind legs and alimentary canal of the bees were investigated with Scanning Electron Microscopy coupled with X-ray spectroscopy (SEM-EDX). The analyses pointed to specific morphological and chemical features of the particulate, and resulted into the identification of three categories of particles: industry -, postmining -, and soil –derived. With the exception of the gut, all the analyzed body districts displayed inorganic particles, mostly concentrated in specific areas of the body (i.e. along the costal margin of the fore wings, the medial plane of the head, and the inner surface of the hind legs). The role of both past mining activities and the industrial activity close to the study area as sources of the particulate matter is also discussed. We conclude that honey bees are able to collect samples of the main airborne particles emitted from different sources, therefore could be an ideal tool for monitoring such a kind of pollutants. PMID:26147982
Zhang, Jianlin; Tan, Yu'e; Ye, Jun; Han, Fangmin
2012-02-01
To explore the effectiveness of bone grafting by intervertebral disc endoscope for postoperative nonunion of fracture of lower limb. Between August 2004 and August 2008, 40 patients (23 males and 17 females) with postoperative nonunion of femoral and tibial fracture, aged 20-63 years (mean, 41.5 years) were treated. Nonunion of fracture occurred at 10-16 months after internal fixation. During the first operation, the internal fixation included interlocking intramedullary nailing of femoral fracture in 12 cases and plate in 16 cases, and interlocking intramedullary nailing of tibial fractures in 9 cases and plate in 3 cases. The X-ray films showed hypertrophic nonunion in 24 cases, common nonunion in 3 cases, and atrophic nonunion in 13 cases. The average operation time was 61 minutes (range, 40-80 minutes), and the blood loss was 80-130 mL (mean, 100 mL). The hospitalization time were 6-11 days (mean, 8.1 days). Incisions healed by first intention in all patients with no complication of infection or neurovascular injury. Forty patients were followed up 10-16 months (mean, 12.3 months). The X-ray films showed that all patients achieved healing of fracture after 4-10 months (mean, 6.8 months). No pain, disfunction, or internal fixation failure occurred. Bone grafting by intervertebral disc endoscope is an effective method for treating postoperative nonunion of femoral and tibial fracture.
The impact of insecticides to local honey bee colony Apis cerana indica in laboratory condition
NASA Astrophysics Data System (ADS)
Putra, Ramadhani E.; Permana, Agus D.; Nuriyah, Syayidah
2014-03-01
Heavy use of insecticides considered as one of common practice at local farming systems. Even though many Indonesian researchers had stated the possible detrimental effect of insecticide on agriculture environment and biodiversity, researches on this subject had been neglected. Therefore, our purpose in this research is observing the impact of insecticides usage by farmer to non target organisme like local honey bee (Apis cerana indica), which commonly kept in area near agriculture system. This research consisted of field observations out at Ciburial, Dago Pakar, Bandung and laboratory tests at School of Life Sciences and Technology, Institut Teknologi Bandung. The field observations recorded visited agriculture corps and types of pollen carried by bees to the nest while laboratory test recorderd the effect of common insecticide to mortality and behavior of honey bees. Three types of insecticides used in this research were insecticides A with active agent Chlorantraniliprol 50 g/l, insecticide B with active agent Profenofos 500 g/l, and insecticides C with active agent Chlorantraniliprol 100 g/l and λ-cyhalotrin 50g/l. The results show that during one week visit, wild flower, Wedelia montana, visited by most honey bees with average visit 60 honey bees followed by corn, Zea mays, with 21 honey bees. The most pollen carried by foragers was Wedelia montana, Calliandra callothyrsus, and Zea mays. Preference test show that honeybees tend move to flowers without insecticides as the preference to insecticides A was 12.5%, insecticides B was 0%, and insecticides was C 4.2%. Mortality test showed that insecticides A has LD50 value 0.01 μg/μl, insecticide B 0.31 μg/μl, and insecticides C 0.09 μg/μl which much lower than suggested dosage recommended by insecticides producer. This research conclude that the use of insecticide could lower the pollination service provide by honey bee due to low visitation rate to flowers and mortality of foraging bees.
Integrative Advanced Oxidation and Biofiltration for Treating Pharmaceuticals in Wastewater.
Lester, Yaal; Aga, Diana S; Love, Nancy G; Singh, Randolph R; Morrissey, Ian; Linden, Karl G
2016-11-01
Advanced oxidation of active pharmaceutical ingredients (APIs) in wastewater produces transformation products (TPs) that are often more biodegradable than the parent compounds. Secondary effluent from a wastewater treatment plant was treated using UV-based advanced oxidation (LPUV/H2O2 and MPUV/NO3) followed by biological aerated filtration (BAF), and different APIs and their transformation products were monitored. The advanced oxidation processes degraded the APIs by 55-87% (LPUV/H2O2) and 58-95% (MPUV/NO3), while minor loss of APIs was achieved in the downstream BAF system. Eleven TPs were detected following oxidation of carbamazepine (5) and iopromide (6); three key TPs were biodegraded in the BAF system. The other TPs remained relatively constant in the BAF. The decrease in UV absorbance (UVA254) of the effluent in the BAF system was linearly correlated to the degradation of the APIs (for the MPUV/NO3-BAF), and can be applied to monitor the biotransformation of APIs in biological-based systems.
Increasing dissolution of trospium chloride by co-crystallization with urea
NASA Astrophysics Data System (ADS)
Skořepová, Eliška; Hušák, Michal; Čejka, Jan; Zámostný, Petr; Kratochvíl, Bohumil
2014-08-01
The search for various solid forms of an active pharmaceutical ingredient (API) is an important step in drug development. Our aim was to prepare co-crystals of trospium chloride, an anticholinergic drug used for the treatment of incontinence, and to investigate if they have advantageous properties for drug formulation. Phase identification was done by powder X-ray diffraction and single-crystal X-ray diffraction. The chemical composition was verified by solution NMR and the dissolution rate of the prepared phases was studied by IDR (intrinsic dissolution rate). For further analysis of phase stability and transitions, combined thermal analysis and temperature-resolved X-ray powder diffraction were used. Urea was selected as a co-crystallization partner. Trospium chloride urea (1:1) co-crystal was prepared by a solvent evaporation. From single-crystal data, the co-crystal structure was solved in a space group P21/c and compared to previously published structures of trospium chloride. Intrinsic dissolution rate revealed that the co-crystal dissolves 32% faster than pure API. However, its low thermal and pressure stability makes it a challenging choice for the final drug formulation.
Effect of black clay soil moisture on the electrochemical behavior of API X70 pipeline steel
NASA Astrophysics Data System (ADS)
Hendi, R.; Saifi, H.; Belmokre, K.; Ouadah, M.; Smili, B.; Talhi, B.
2018-03-01
The effect of moisture content variation (20–100 wt.%) on the electrochemical behavior of API X70 pipeline steel buried in the soil of Skikda (East of Algeria) was studied using electrochemical techniques, scanning electron microscopy (SEM), X ray diffraction analysis (XRD) and weight loss measurement. The electrochemical measurements showed that the corrosion current Icorr is directly proportional to the moisture content up to 50 wt.%, beyond this content, this value becomes almost constant. The result were confirmed by electrochemical impedance spectroscopy; the capacitance of the double layer formed on the surface is the highest at 50 wt.%. A single time constant was detected by plotting the Bode diagrams. The steel surface degradation has been appreciated using the scanning electron microscopy observations. A few pitting corrosion at 20 wt.% moisture, followed by more degradation at 50 wt.% have been revealed. However, when the moisture amount exceeded 50 wt.%, the surface became entirely covered by a corrosion product. XRD analysis revealed the dominance of FeOOH and Fe3O4 phases on steel surface for a moisture content of 50 wt.%.
1978-02-01
6 .- 6 a . I a- S 0 I I C3 uI nm0 14 * N N nInA C3 f6 - ~ S C3S00 0c h )4 a1 SnI S i LU 14 0 I0 w 1 .- 4 1- pejz I C SW4 - #N0Wa*% 0( IW -W~ x...m #a CAC3 * DtoKIDft4 lp 3 I f6 . lt-C3 lat *0- IL 0 19 9 9 999 **9 U% .49 9999 I (A o3 0-1.1 N N .80* us-Ia. , NF0In m UN O.4 " 0.2 4% 1 I 1 WI "i I4...G OPIA0 0* N.4C " DI 0.3, 0=6s (A 6 4 6 4 .4 *L 7 I I f6 1 0 CLx 2 W N M9 0% *ON 40 MNca.4t C3 GON 00’p.*!fU ON N I o x11 j eS .4 4 I 6& ILI’N I L5
Medeiros, Roberta Antigo; de Carvalho, Adriana Evaristo; Rocha-Filho, Romeu C; Fatibello-Filho, Orlando
2008-07-30
A simple and highly selective electrochemical method was developed for the simultaneous determination of aspartame and cyclamate in dietary products at a boron-doped diamond (BDD) electrode. In square-wave voltammetric (SWV) measurements, the BDD electrode was able to separate the oxidation peak potentials of aspartame and cyclamate present in binary mixtures by about 400 mV. The detection limit for aspartame in the presence of 3.0x10(-4) mol L(-1) cyclamate was 4.7x10(-7) mol L(-1), and the detection limit for cyclamate in the presence of 1.0x10(-4) mol L(-1) aspartame was 4.2x10(-6) mol L(-1). When simultaneously changing the concentration of both aspartame and cyclamate in a 0.5 mol L(-1) sulfuric acid solution, the corresponding detection limits were 3.5x10(-7) and 4.5x10(-6) mol L(-1), respectively. The relative standard deviation (R.S.D.) obtained was 1.3% for the 1.0x10(-4) mol L(-1) aspartame solution (n=5) and 1.1% for the 3.0x10(-3) mol L(-1) cyclamate solution. The proposed method was successfully applied in the determination of aspartame in several dietary products with results similar to those obtained using an HPLC method at 95% confidence level.
NASA Astrophysics Data System (ADS)
Saeedi, Mohsen; Li, Loretta Y.; Grace, John R.
2017-04-01
Soils co-contaminated with polycyclic aromatic hydrocarbons (PAHs) and heavy metals are challenging for remediation. In the present study desorption of pyrene in kaolinite, co-contaminated by Ni, Pb and Zn, was examined by combinations of surfactants and chelating agents such as Triton X-100, Tween 80, Ethylene diamine tetra acetic acid (EDTA) and citric acid. Results showed that a combination of Triton X-100 (7.5 % w/w) + EDTA (0.01 M) and Tween 80 (7.5 % w/w) + EDTA (0.01 M) were effective in simultaneously desorbing both types of contaminants. Batch desorption tests were conducted using single and combined enhancing agents containing Triton X-100 and Tween 80 as non-ionic surfactants, EDTA as a chelating agent, and citric acid as an organic acid. The solution with the highest removal efficiency was the combined solution containing Triton X-100 (7.5 % w/w) + EDTA (0.01M). Triton X-100 (7.5% w/w) + EDTA (0.01M) led to removal efficiencies of 88% for pyrene in base kaolinite. Batch desorption kinetic experiments were performed using Triton X-100 (7.5% w/w) + EDTA (0.01M). During the first 24 h, desorption was rapid. Organic matter content in the kaolinite led to a reduction in the desorption rate of the contaminants. The desorption kinetic data were well fitted by a pseudo-second-order kinetic model.
Hidden Active Galactic Nuclei in Early-type Galaxies
NASA Astrophysics Data System (ADS)
Paggi, Alessandro; Fabbiano, Giuseppina; Civano, Francesca; Pellegrini, Silvia; Elvis, Martin; Kim, Dong-Woo
2016-06-01
We present a stacking analysis of the complete sample of early-type galaxies (ETGs) in the Chandra COSMOS (C-COSMOS) survey, to explore the nature of the X-ray luminosity in the redshift and stellar luminosity ranges 0\\lt z\\lt 1.5 and {10}9\\lt {L}K/{L}⊙ \\lt {10}13. Using established scaling relations, we subtract the contribution of X-ray binary populations to estimate the combined emission of hot ISM and active galactic nuclei (AGNs). To discriminate between the relative importance of these two components, we (1) compare our results with the relation observed in the local universe {L}X,{gas}\\propto {L}K4.5 for hot gaseous halos emission in ETGs, and (2) evaluate the spectral signature of each stacked bin. We find two regimes where the non-stellar X-ray emission is hard, consistent with AGN emission. First, there is evidence of hard, absorbed X-ray emission in stacked bins including relatively high z (˜1.2) ETGs with average high X-ray luminosity ({L}X {- {LMXB}}≳ 6× {10}42 {{erg}} {{{s}}}-1). These luminosities are consistent with the presence of highly absorbed “hidden” AGNs in these ETGs, which are not visible in their optical-IR spectra and spectral energy distributions. Second, confirming the early indication from our C-COSMOS study of X-ray detected ETGs, we find significantly enhanced X-ray luminosity in lower stellar mass ETGs ({L}K≲ {10}11{L}⊙ ), relative to the local {L}X,{gas}\\propto {L}K4.5 relation. The stacked spectra of these ETGs also suggest X-ray emission harder than expected from gaseous hot halos. This emission is consistent with inefficient accretion {10}-5-{10}-4{\\dot{M}}{Edd} onto {M}{BH}˜ {10}6-{10}8 {M}⊙ .
Liu, Fan; Yu, Shuxin; Tang, Tao; Sun, Yuanshe; Zhang, Weibing; Li, Tong
2011-09-01
Laser-induced fluorescence detector (LIFD) is one of the most sensitive detectors in analytical chemical files. Confocal optical configuration is widely used in LIFDs. Two effective approaches used to achieve the best signal to noise ratio (S/N) are increasing the confocal precision and minimizing the background noise. A novel three-dimensional adjustable confocal LIFD was developed, using a new three-dimensional adjustable supporter of reflector and modularized optical system. A detection limit (S/N = 3) of 1 x 10(-12) mol/L and a linear dynamic range of 3 orders of magnitude were obtained using fluorescein isothiocyanate (FITC) standard as the test sample. The noise level and drift levels were 8.0 x 10(-3) mV and 1.4 x 10(-3) mV/h, respectively, which were almost 10 times lower than before. And the stability of the LIFD was evaluated by five replicate injections of 5 x 10(-9) mol/L FITC, and the relative standard deviations (RSDs) of peak height and peak area were 0.38% and 0.41%, respectively. Further more, three biogenic amines, which were derivatized by FITC, were separated by high performance liquid chromatography (HPLC) and then detected by the novel LIFD. And the detection limits (S/N = 3) ranged 0.01 to 0.02 nmol/L, which were better than other methods. Therefore, the LIFD is highly sensitive, as well as shows a real low noise level and good reproducibility.
Air Force Office of Scientific Research Technical Report Summaries.
1992-01-01
Wo N a*1 W.V. 4 4 1 z ? mO 4 1w~ 4 00~~~~~0 N14 000 N.J 014 N ~ Q u~ 0 Nb.)(sia 4S~ 4 4 W.. 66 r- IDS 4 ag - a"u r- ma- P I" Mj 0n 1V0 ’a V 4 VW L4 W...C!z E E P L 00 8 x z 0 M 4-. z 0 C’, Al S S Oslo, Eu 0 2*’ 0 01 C. 0 . 80 0.ŔN * .u *L-3 -* .8C at U C E M let- C- L t 00 I az L ag A 0!0 400 u0U L...8217 04a M 5 L0 39 0 L0 WIC a in ag n 31c L P4 L 0 L J * 2I. 3i CU s,; w ’ V) C) 3 - u &’W( C 0)C0 ~ Eq 50 w 0 ’.6 c4e Zn Cx N -m J’ SLQO O ’ o40 0 L-C V
Physiological adaptations during endurance training below anaerobic threshold in rats.
de Araujo, Gustavo Gomes; Papoti, Marcelo; Delbin, Maria Andréia; Zanesco, Angelina; Gobatto, Claudio Alexandre
2013-07-01
To assess the effects of continuous exercise training at intensities corresponding to 80 and 90 % of the lactate minimum test (LM), we evaluated antioxidant activity, hormone concentration, biochemical analyses and aerobic and anaerobic performance, as well as glycogen stores, during 12 weeks of swimming training in rats. One-hundred rats were separated into three groups: control (CG, n = 40), exercise at 80 (EG80, n = 30) and 90% (EG90, n = 30) of LM. The training lasted 12 weeks, with sessions of 60 min/day, 6 days/week. The intensity was based at 80 and 90% of the LM. The volume did not differ between training groups (X of EG80 = 52 ± 4 min; X of EG90 = 56 ± 2 min). The glycogen concentration (mg/100 mg) in the gastrocnemius increased after the training in EG80 (0.788 ± 0.118) and EG90 (0.795 ± 0.157) in comparison to the control (0.390 ± 0.132). The glycogen stores in the soleus enhanced after the training in EG90 (0.677 ± 0.230) in comparison to the control (0.343 ± 0.142). The aerobic performance increased by 43 and 34% for EG80 and EG90, respectively, in relation to baseline. The antioxidant enzymes remain unchanged during the training. Creatine kinase (U/L) increased after 8 weeks in both groups (EG80 = 427.2 ± 97.4; EG90 = 641.1 ± 90.2) in relation to the control (246.9 ± 66.8), and corticosterone (ng/mL) increased after 12 weeks in EG90 (539 ± 54) in comparison to the control (362 ± 44). The continuous exercise at 80 and 90% of the LM has a marked aerobic impact on endurance performance without significantly biomarkers changes compared to control.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hollman, David; Lifflander, Jonathon; Wilke, Jeremiah
2017-03-14
DARMA is a portability layer for asynchronous many-task (AMT) runtime systems. AMT runtime systems show promise to mitigate challenges imposed by next generation high performance computing architectures. However, current runtime system technologies are not production-ready. DARMA is a portability layer that seeks to insulate application developers from idiosyncrasies of individual runtime systems, thereby facilitating application-developer use of these technologies. DARMA comprises a frontend application programming interface (API) for application developers, a backend API for runtime system developers, and a translation that translates frontend API calls into backend API calls. Application developers use C++ abstractions to annotate both data and tasksmore » in their code. The DARMA translation layer uses C++ template metaprogramming to capture data-task dependencies, and provides this information to a potential backend runtime system via a series of backend API calls.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chou, Jyh-Ching; Cohen, J.D.; Mulbry, W.W.
1996-11-01
Indole-3-acetyl-amino acid conjugate hydrolases are believed to be important in the regulation of indole-3-acetic acid (IAA) metabolism in plants and therefore have potential uses for the alteration of plant IAA metabolism. To isolate bacterial strains exhibiting significant indole-3-acetyl-aspartate (IAA-Asp) hydrolase activity, a sewage sludge inoculation was cultured under conditions in which IAA-Asp served as the sole source of carbon and nitrogen. One isolate, Enterobacter agglomerans, showed hydrolase activity inducible by IAA-L-Asp or N-acetyl-L-Asp but not by IAA, (NH{sub 4}){sub 2}SO{sub 4}, urea, or indoleacetamide. Among a total of 17 IAA conjugates tested as potential substrates, the enzyme had an exclusivelymore » high substrate specificity for IAA-L-Asp of 13.5 mM. The optimal pH for this enzyme was between 8.0 and 8.5. In extraction buffer containing 0.8 mM Mg{sup 2+} the hydrolase activity was inhibited to 80% by 1 mM dithiothreitol and to 60% by 1 mm CuSO{sub 4}; the activity was increased by 40% with 1mM MnSO{sub 4}. However, in extraction buffer with no trace elements, the hydrolase activity was inhibited to 50% by either 1 mM dithiothreitol or 1% Triton X-100 (Sigma). These results suggest that disulfide bonding might be essential for enzyme activity. Purification of the hydrolase by hydroxyapatite and TSK-phenyl (HP-Genenchem, South San Francisco, CA) preparative high-performance liquid chromatography yielded a major 45-kD polypeptide as shown by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. 45 refs., 5 figs., 3 tabs.« less
Abramson, Charles I; Craig, David Philip Arthur; Varnon, Christopher A; Wells, Harrington
2015-05-01
We investigated the effects of ethanol on reversal learning in honey bees (Apis mellifera anatolica). The rationale behind the present experiment was to determine the species generality of the effect of ethanol on response inhibition. Subjects were originally trained to associate either a cinnamon or lavender odor with a sucrose feeding before a reversal of the conditioned stimuli. We administered 15 μL of ethanol at varying doses (0%, 2.5%, 5%, 10%, or 20%) according to group assignment. Ethanol was either administered 5 min before original discrimination training or 5 min before the stimuli reversal. We analyzed the effects of these three manipulations via a recently developed individual analysis that eschews aggregate assessments in favor of a model that conceptualizes learning as occurring in individual organisms. We measured responding in the presence of conditioned stimuli associated with a sucrose feeding, responding in the presence of conditioned stimuli associated with distilled water, and responding in the presence of the unconditioned stimulus (sucrose). Our analyses revealed the ethanol dose manipulation lowered responding for all three measures at increasingly higher doses, which suggests ethanol served as a general behavioral suppressor. Consistent with previous ethanol reversal literature, we found administering ethanol before the original discrimination phase or before the reversal produced inconsistent patterns of responding at varying ethanol doses. Copyright © 2015 Elsevier Inc. All rights reserved.
An Update to the EARTHTIME Argon Intercalibration Pipette System (APIS): Smoking from the Same Pipe
NASA Astrophysics Data System (ADS)
Turrin, B. D.; Swisher, C. C., III; Hemming, S. R.; Renne, P. R.; Deino, A. L.; Hodges, K. V.; Van Soest, M. C.; Heizler, M. T.
2015-12-01
Background: An initial 40Ar/39Ar inter-calibration experiment, using two of the most commonly used 40Ar/39Ar mineral standards, Fish Canyon (FC, ~28.2 Ma) and Alder Creek (AC, ~1.2 Ma) sanidines, revealed significant inter-laboratory inconsistencies. The reported ages for the AC sanidines range from 1.173 to 1.200 Ma (FC 28.02) (±~2%), ~4 times greater than the reported precisions. These experiments have motivated the 40Ar/39Ar community to reevaluate procedures and subsequent informal lab intercalibrations experiments are in better agreement, but discrepancies remain that need to be addressed. Experiment: In an effort to isolate the causes of these inconsistencies, an Argon Intercalibration Pipette System (APIS) was designed and constructed. The APIS system consists of three gas canisters; one containing atmospheric Ar and the other two canisters contain 40Ar/39Ar ratios that represent FC and AC. The volumes of the pipettes, bulbs and manifold are determined to within 0.4% and both systems were initially filled to the same pressure with Ar standard gases. Each canister has 4x10-10 moles of 40Ar, is equipped with a 0.1, 0.2 and 0.4 cc pipettes and can deliver increments from 0.1-0.7 cc. APIS-1 was designated as the traveling unit that is brought to participating labs, APIS-2 is the reserve/master standard. Early Results and Impressions: APIS-1 has been to four labs (Rutgers, LDEO, New Mexico Tech, and BGC) and is heading to ASU. Early APIS experimental data indicate that the inter-laboratory 40Ar/39Ar age results can meet or exceed the EARTHTIME goal of ±1‰ precision. The inter-laboratory comparisons are ongoing, and will include additional laboratories of opportunity. Lastly, the development of additional mineral standards that "fill in" the age gaps between the existing mineral standards would significantly improve attempting to achieve interlaboratory agreement at the ±1‰ level
De Leersnyder, Fien; Peeters, Elisabeth; Djalabi, Hasna; Vanhoorne, Valérie; Van Snick, Bernd; Hong, Ke; Hammond, Stephen; Liu, Angela Yang; Ziemons, Eric; Vervaet, Chris; De Beer, Thomas
2018-03-20
A calibration model for in-line API quantification based on near infrared (NIR) spectra collection during tableting in the tablet press feed frame was developed and validated. First, the measurement set-up was optimised and the effect of filling degree of the feed frame on the NIR spectra was investigated. Secondly, a predictive API quantification model was developed and validated by calculating the accuracy profile based on the analysis results of validation experiments. Furthermore, based on the data of the accuracy profile, the measurement uncertainty was determined. Finally, the robustness of the API quantification model was evaluated. An NIR probe (SentroPAT FO) was implemented into the feed frame of a rotary tablet press (Modul™ P) to monitor physical mixtures of a model API (sodium saccharine) and excipients with two different API target concentrations: 5 and 20% (w/w). Cutting notches into the paddle wheel fingers did avoid disturbances of the NIR signal caused by the rotating paddle wheel fingers and hence allowed better and more complete feed frame monitoring. The effect of the design of the notched paddle wheel fingers was also investigated and elucidated that straight paddle wheel fingers did cause less variation in NIR signal compared to curved paddle wheel fingers. The filling degree of the feed frame was reflected in the raw NIR spectra. Several different calibration models for the prediction of the API content were developed, based on the use of single spectra or averaged spectra, and using partial least squares (PLS) regression or ratio models. These predictive models were then evaluated and validated by processing physical mixtures with different API concentrations not used in the calibration models (validation set). The β-expectation tolerance intervals were calculated for each model and for each of the validated API concentration levels (β was set at 95%). PLS models showed the best predictive performance. For each examined saccharine concentration range (i.e., between 4.5 and 6.5% and between 15 and 25%), at least 95% of future measurements will not deviate more than 15% from the true value. Copyright © 2018 Elsevier B.V. All rights reserved.
Xi, Zhijun; Zhang, Zhujun; Sun, Yonghua; Shi, Zuolong; Tian, Wei
2009-07-15
A novel method for determination of indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) in an extract from mung bean sprouts using high performance liquid chromatography (HPLC) with chemiluminescence (CL) detection is described. The method is based on the CL reaction of auxin (indole-3-acetic acid and indole-3-butyric acid) with acidic potassium permanganate (KMnO(4)) and tris(2,2'-bipyridyl)ruthenium(II), which was immobilized on the cationic ion-exchange resin. The chromatographic separation was performed on a Nucleosil RP-C18 column (i.d.: 250 mm x 4.6 mm, particle size: 5 microm, pore size: 100) with an isocratic mobile phase consisting of methanol-water-acetic acid (45:55:1, v/v/v). At a flow rate of 1.0 mL min(-1), the total run time was 20 min. Under the optimal conditions, the linear ranges were 5.0x10(-8) to 5.0x10(-6)g mL(-1) and 5.0x10(-7) to 1.0x10(-5)g mL(-1) for IAA and IBA, respectively. The detection limits were 2.0x10(-8)g mL(-1) and 2.0x10(-7)g mL(-1) for IAA and IBA, respectively. The relative standard deviation (RSD) of intra-day were 3.1% and 2.3% (n=11) for 2x10(-6)g mL(-1) IAA and 2x10(-6)g mL(-1) IBA; The relative standard deviations of inter-day precision were 6.9% and 4.9% for 2x10(-6)g mL(-1) IAA and 2x10(-6)g mL(-1) IBA. The proposed method had been successfully applied to the determination of auxin in mung bean sprouts.
Kakio, Tomoko; Yoshida, Naoko; Macha, Susan; Moriguchi, Kazunobu; Hiroshima, Takashi; Ikeda, Yukihiro; Tsuboi, Hirohito; Kimura, Kazuko
2017-09-01
Analytical methods for the detection of substandard and falsified medical products (SFs) are important for public health and patient safety. Research to understand how the physical and chemical properties of SFs can be most effectively applied to distinguish the SFs from authentic products has not yet been investigated enough. Here, we investigated the usefulness of two analytical methods, handheld Raman spectroscopy (handheld Raman) and X-ray computed tomography (X-ray CT), for detecting SFs among oral solid antihypertensive pharmaceutical products containing candesartan cilexetil as an active pharmaceutical ingredient (API). X-ray CT visualized at least two different types of falsified tablets, one containing many cracks and voids and the other containing aggregates with high electron density, such as from the presence of the heavy elements. Generic products that purported to contain equivalent amounts of API to the authentic products were discriminated from the authentic products by the handheld Raman and the different physical structure on X-ray CT. Approach to investigate both the chemical and physical properties with handheld Raman and X-ray CT, respectively, promise the accurate discrimination of the SFs, even if their visual appearance is similar with authentic products. We present a decision tree for investigating the authenticity of samples purporting to be authentic commercial tablets. Our results indicate that the combination approach of visual observation, handheld Raman and X-ray CT is a powerful strategy for nondestructive discrimination of suspect samples.
Ziaei, Ehsan; Mehdinia, Ali; Jabbari, Ali
2014-11-19
New mercapto-grafted graphene oxide-magnetic chitosan (GO-MC) has been developed as a novel biosorbent for the preconcentration and extraction of mercury ion from water samples. A facile and ecofriendly synthesis procedure was also developed for modification of GO-MC with 3-mercaptopropyltrimethoxysilane. The prepared nanocomposite material (mercapto/GO-MC) was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and energy-dispersive X-ray spectroscopy (EDX). The mercury analysis was performed by continuous-flow cold vapor atomic absorption spectrometry. The parameters affecting the extraction and preconcentration processes were carried out. The optimum conditions were found to be 60mg of sorbent, pH of 6.5, 10min for adsorption time, 3mL of HCl (0.1mol L(-1))/thiourea (2% w/v) as the eluent and 250mL for breakthrough volume. An excellent linearity was achieved in the range of 0.12-80ng mL(-1) (R(2)=0.999) at a preconcentration factor of 80. The limit of detection and quantification were achieved as 0.06ng mL(-1) and 0.12ng mL(-1), respectively. A good repeatability was obtained with the relative standard deviation (RSD) of 4.7%. Furthermore, real water samples were analyzed and good recoveries were obtained from 95 to 100%. Copyright © 2014 Elsevier B.V. All rights reserved.
Huda, Walter; Lieberman, Kristin A; Chang, Jack; Roskopf, Marsha L
2004-03-01
We investigated how patient head characteristics, as well as the choice of x-ray technique factors, affect lesion contrast and noise values in computed tomography (CT) images. Head sizes and mean Hounsfield unit (HU) values were obtained from head CT images for five classes of patients ranging from the newborn to adults. X-ray spectra with tube voltages ranging from 80 to 140 kV were used to compute the average photon energy, and energy fluence, transmitted through the heads of patients of varying size. Image contrast, and the corresponding contrast to noise ratios (CNRs), were determined for lesions of fat, muscle, and iodine relative to a uniform water background. Maintaining a constant image CNR for each lesion, the patient energy imparted was also computed to identify the x-ray tube voltage that minimized the radiation dose. For adults, increasing the tube voltage from 80 to 140 kV changed the iodine HU from 2.62 x 10(5) to 1.27 x 10(5), the fat HU from -138 to -108, and the muscle HU from 37.1 to 33.0. Increasing the x-ray tube voltage from 80 to 140 kV increased the percentage energy fluence transmission by up to a factor of 2. For a fixed x-ray tube voltage, the percentage transmitted energy fluence in adults was more than a factor of 4 lower than for newborns. For adults, increasing the x-ray tube voltage from 80 to 140 kV improved the CNR for muscle lesions by 130%, for fat lesions by a factor of 2, and for iodine lesions by 25%. As the size of the patient increased from newborn to adults, lesion CNR was reduced by about a factor of 2. The mAs value can be reduced by 80% when scanning newborns while maintaining the same lesion CNR as for adults. Maintaining the CNR of an iodine lesion at a constant level, use of 140 kV increases the energy imparted to an adult patient by nearly a factor of 3.5 in comparison to 80 kV. For fat and muscle lesions, raising the x-ray tube voltage from 80 to 140 kV at a constant CNR increased the patient dose by 37% and 7%, respectively. Our two key findings are that for head CT examinations performed at a constant CNR, the mAs can be substantially reduced when scanning infants, and that use of the lowest x-ray tube voltage will generally reduce patient doses.
Wang, Si-Cen; Chen, Qin-Hua; Wei, Yao-Yuan; Li, Han-Wen; He, Lang-Chong
2007-05-01
To analyze the constituents in supercritical fluid CO2 extraction (SFE-CO2) of Radix caulophylli, the Radix caulophylli was extracted with SFE-CO2, and analyzed by gas chromatography-mass spectrometry (GC-MS). The GC-MS analysis with a DB-5MS capillary column (30 mm x 0.32 mm ID, 0.25 microm film thickness) was used. The inlet temperature was maintained at 280 degrees C. The column oven was held at 80 degrees C for 2 min, then programmed from 80 to 280 degrees C at 5 degrees C x min(-1) and, finally, held for 4 min. Helium at a constant flow rate of 2.0 mL x min(-1) was used as the carrier gas. The mass spectrometry conditions were as follows: ionization energy, 70 eV; ion source temperature, 200 degrees C. The mass selective detector was operated in the TIC mode (m/z was from 40 - 500). For the first time 49 peaks were separated and identified, the compounds were quantitatively determined by normalization method, and the identified compounds represent 97.44% of total GC peak areas. Viz, n-hexadecanoic acid (31.4%), (E, E) -9, 12-octadecadienoic acid (26.54%), (Z)-7-tetradecenal (9.4%), hexadecenoic acid (3.23%), 10-undecenal (3.22%), octadecanoic acid (2.25%), and caulophylline (1.76%) etc. The results will provide important foundation for understanding the constituents and further exploitation of Radix caulophylli.
Chen, Wei-Ti; Guthrie, Barbara; Shiu, Cheng-Shi; Yang, Joyce P; Weng, Zhongqi; Wang, Lixuan; Kamitani, Emiko; Fukuda, Yumiko; Luu, Binh Vinh
2014-01-01
Asians and Pacific Islanders (API) are among the fastest growing minority groups within the USA, and this growth has been accompanied by an increase in HIV incidence. Between 2000 and 2010, the API HIV infection rate increased from 4.5% to 8.7%; however, there is a paucity of HIV-related research for this group, and even less is known about the prevalence and correlates of antiretroviral therapy adherence behavior, quality of life, impact of stress, and efficacious self-management among HIV+ API Americans. This paper examines how acculturation and perceived stress affect depression symptomatology and treatment seeking in the HIV+ API population. A series of cross-sectional audio computer-assisted self-interviews were conducted with a convenience sample of 50 HIV+ API (29 in San Francisco and 21 in New York City). The relationship between acculturation and perceived stress was analyzed, and the results indicate that for those HIV+ API who reported low or moderate acculturation (as compared to those who reported high acculturation), stress was significantly mediated by depression symptomology. Interventions to address acculturation and reduce perceived stress among API generally and Asians specifically are therefore needed.
Kougoulos, Eleftherios; Smales, Ian; Verrier, Hugh M
2011-03-01
A novel experimental approach describing the integration of drug substance and drug production design using particle engineering techniques such as sonocrystallization, high shear wet milling (HSWM) and dry impact (hammer) milling were used to manufacture samples of an active pharmaceutical ingredient (API) with diverse particle size and size distributions. The API instability was addressed using particle engineering and through judicious selection of excipients to reduce degradation reactions. API produced using a conventional batch cooling crystallization process resulted in content uniformity issues. Hammer milling increased fine particle formation resulting in reduced content uniformity and increased degradation compared to sonocrystallized and HSWM API in the formulation. To ensure at least a 2-year shelf life based on predictions using an Accelerated Stability Assessment Program, this API should have a D [v, 0.1] of 55 μm and a D [v, 0.5] of 140 μm. The particle size of the chief excipient in the drug product formulation needed to be close to that of the API to avoid content uniformity and stability issues but large enough to reduce lactam formation. The novel methodology described here has potential for application to other APIs. © 2011 American Association of Pharmaceutical Scientists
Kittell, Aaron W.; Hustedt, Eric J.; Hyde, James S.
2014-01-01
Site-directed spin-labeling electron paramagnetic resonance (SDSL EPR) provides insight into the local structure and motion of a spin probe strategically attached to a molecule. When a second spin is introduced to the system, macromolecular information can be obtained through measurement of inter-spin distances either by continuous wave (CW) or pulsed electron double resonance (ELDOR) techniques. If both methodologies are considered, inter-spin distances of 8 to 80 Å can be experimentally determined. However, there exists a region at the upper limit of the conventional X-band (9.5 GHz) CW technique and the lower limit of the four-pulse double electron-electron resonance (DEER) experiment where neither method is particularly reliable. The work presented here utilizes L-band (1.9 GHz) in combination with non-adiabatic rapid sweep (NARS) EPR to address this opportunity by increasing the upper limit of the CW technique. Because L-band linewidths are three to seven times narrower than those at X-band, dipolar broadenings that are small relative to the X-band inhomogeneous linewidth become observable, but the signal loss due to the frequency dependence of the Boltzmann factor, has made L-band especially challenging. NARS has been shown to increase sensitivity by a factor of five, and overcomes much of this loss, making L-band distance determination more feasible [1]. Two different systems are presented and distances of 18–30 Å have been experimentally determined at physiologically relevant temperatures. Measurements are in excellent agreement with a helical model and values determined by DEER. PMID:22750251
Effects of pyrimidines on the guinea-pig coronary vasculature.
Vials, A. J.; Burnstock, G.
1993-01-01
1. The effects of the pyrimidines, uridine 5'-triphosphate (UTP), thymidine 5'-triphosphate (TTP) and cytidine 5'-triphosphate (CTP), were examined in the guinea-pig coronary bed, by use of a Langendorff technique. Comparisons were made with the actions of the purines adenosine 5'-triphosphate (ATP), inosine 5'-triphosphate (ITP) and guanosine 5'-triphosphate (GTP). The effect of, the nitric oxide synthase inhibitor, L-NG-nitroarginine methyl ester (L-NAME) and, the prostaglandin synthesis inhibitor, indomethacin on the vasodilator response to these purines and pyrimidines was examined. The effects of these inhibitors were assessed on their ability to inhibit both the amplitude and the area of the vasodilator response. 2. The relative order of potency of the purines and pyrimidines studied was ATP > UTP > ITP >> GTP, TTP, CTP. 3. The maximum amplitude and area of the vasodilator response to the pyrimidines, UTP (5 x 10(-10)-5 x 10(-7) mol), TTP (5 x 10(-8)-5 x 10(-7) mol) and CTP (5 x 10(-7) mol), and purines, ITP (5 x 10(-9)-5 x 10(-7) mol) and GTP (5 x 10(-8)-5 x 10(-7) mol), were significantly reduced by L-NAME (3 x 10(-5) and 10(-4) M).(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8298797
NEXAFS and XPS characterization of molecular oxygen adsorbed on Ni(100) at 80 K
NASA Astrophysics Data System (ADS)
Kim, C. M.; Jeong, H. S.; Kim, E. H.
2000-07-01
X-ray photoelectron spectroscopy (XPS), thermal desorption spectroscopy (TDS) and near edge extended X-ray absorption fine structure (NEXAFS) have been combined to investigate the adsorption of oxygen on Ni(100) at 80 K. Three O(1s) XPS features were observed at 530.0, 531.1 and 534.7 eV when the Ni(100) surface was exposed to 600 L of oxygen at 80 K. They are assigned as O 2-, O 1- and molecular oxygen species, respectively. The presence of molecular oxygen has been confirmed by TDS and NEXAFS. Molecular O 2 on Ni(100) is oriented perpendicular to the surface, and the OO bond length is estimated to be 1.24 Å, based on the NEXAFS σ ∗ resonance energy.
Physicochemical Properties of Biosurfactant Produced by Pseudomonas fluorescens Grown on Whey Tofu
NASA Astrophysics Data System (ADS)
Suryanti, V.; Handayani, D. S.; Marliyana, S. D.; Suratmi, S.
2017-02-01
The research aims to examine the physicochemical properties of biosurfactant produced by Pseudomonas fluorescens. Biosurfactant was produced in whey tofu media containing 8 g/L nutrient broth and 5 g/L NaCl which was fermented for 2 days at room temperature. Biosurfactant was identified as rhamnolipids which had critical micelle concentration (CMC) value of 638 mg/L and surface tension of 54 mN/m. The biosurfactant had water in oil (w/o) emulsion type. The biosurfactant was able to decrease the interfacial tension more than 40% for emulsion of water with hexane, pentane, benzene, lubricants or kerosene. The stable emulsions were reached up to 30 days with the E24 value of about 50% when paraffin, toluene, lubricants or palm oil was used as an immiscible compound. Commercial surfactants, such as Triton X-100 and Tween-80 were investigated to compare their emulsification activities and emulsion stabilities with the produced biosurfactant.
Landgraf, R; Bilo, H J; Müller, P G
1999-05-01
To compare the efficacy and safety of repaglinide, a novel oral prandial glucose regulator, with that of glibenclamide, an oral hypoglycaemic agent, in the treatment of patients with type 2 diabetes. This was a 14-week, double-blind, parallel-group trail in which a total of 195 type 2 diabetic patients treated with oral hypoglycaemic agents were randomized to receive either repaglinide, administered preprandially three times daily, or glibenclamide, given preprandially once or twice daily, as per manufacturer's recommendations. By the end of the study, the 2-h postprandial blood glucose values were lower in the repaglinide group than in the glibenclamide group, with the difference approaching statistical significance (repaglinide, 8.1 (0.6) mol x l(-1) vs glibenclamide, 9.1 (0.6)mmol x l(-1); P = 0.07). There was no statistically significant difference in the mean blood glucose level at the end of the study between the two groups (repaglinide, 7.1 (0.5) mmol x l(-1) vs glibenclamide, 7.4 (0.5) mmol x l(-1); P = 0.42), and baseline HbA1c values had decreased to the same degree in both the repaglinide [7.8% (0.1%) to 7.5% 0.1%)] and the glibenclamide groups [8.0 (0.1%) to 7.6 (0.1%)]. There are no significant differences between the repaglinide and glibenclamide treatment groups in the levels of fasting blood glucose, fructosamine, fasting C-peptide, insulin and proinsulin. Neither treatment group showed any clinically significant changes in blood lipid profiles. Repaglinide and glibenclamide were both well tolerated. No significant differences were observed between the two treatment groups with respect to adverse events, including hypoglycaemic episodes and weight change. No accumulation of repaglinide was apparent during the maintenance period. Repaglinide is as well tolerated as glibenclamide and is equally effective in the management of type 2 diabetes. Repaglinide may, however, offer an improvement in postprandial blood glucose control compared with glibenclamide, thereby helping to reduce the relative long-term risk of diabetic complications.
[Effects of 1-bromopropane on neurological and hematological changes of female exposed workers].
Li, Wei-Hua; Zhou, Zhi-Jun; Wang, Qiang-Yi; Ichihara, Gaku; Takeuchi, Yasuhiro; Ding, Xun-Cheng
2010-05-01
To investigate the health effects of 1-bromopropane (1-BP) on female exposed workers. Four 1-BP manufacturing plants were investigated. Workers were interviewed with questionnaire and examined with neurobehavioral core test battery, nerve conduction velocity tests of nervus tibialis and nervus suralis, vibration sensation test, hematological and biochemical tests. Ambient 1-BP concentration was measured with detection tube, and time-weighed average levels of individual workers were estimated with passive samplers. 1-BP concentration in the plants ranged from 0 to 402.40 mg/m3 (Geomean 32.19 mg/m3). Time-weighted average exposure levels (TWA-8 h) ranged from 0.35 to 535.19 mg/m3 (Geomean 14.08 mg/m3). Compared with the control group, 1-BP exposed workers showed reduced motor nerve conduction velocity [(44.8 +/- 8.7) m/s] and sensory nerve conduction velocity [(45.5 +/- 4.9) m/s], prolonged distal latency [(7.5 +/- 2.1) ms], reduced toe vibration perception, and altered neurobehavior parameters(POMS vigor, tension, anxiety, confusion) significantly (P < 0.05). As to hematological and biochemical indicators, the exposed workers showed decreased white blood cell count [(5.6 +/- 2.17) x 10(3)/microl], red blood cell count [(3.9 +/- 0.4) x 10(6)/microl], hemoglobin [(121.1 +/- 14.5) g/L] and creatine kinase [(82.0 +/- 27.5) IU/L] (P < 0.05), and increased serum total protein (8.0 +/- 0.5 g/dl), lactate dehydrogenase [(335.2 +/- 356.6) IU/L], thyroid-stimulating hormone [(3.6 +/- 2.3) microIU/ml] and follicle-stimulating hormone levels (18.7 +/- 24.4 mIU/ml) (P < 0.05). 1-BP exposure may affect peripheral nerves and central nervous system, and lead to abnormal hematological and biomedical indicators.
Columbia: The first 5 flights entry heating data series. Volume 1: An overview
NASA Technical Reports Server (NTRS)
Williams, S. D.
1984-01-01
Entry heating flight data and wind tunnel data on the lower windward and upper lee side centerline, lower wing 50% and 80% semi-spans, side fuselage and payload bay door, Z-400 and 440 trace aft of X/L=0.2, and OMS Pod trace 3, are presented for the first five flights of the space shuttle orbiter. Heating rate distributions are presented in terms of normalized shock Reynolds number to show the sensitivity of heating to these parameters. The surface heating rates and temperatures were obtained via the JSC NONLIN/INVERSE computer program.
1981-07-01
MY 161b 4703266 65882 70,8 6.236 930 67.61 36.4 9,r’ 4 W., bIub_ 3345791 55711 59,9 30181 93C 1 81 1 S Dow Point 1-- - - - - - - - - - - - - --)7...zlr Z X Me N Ni. Obs. Me mle. of Now,$ wolk Tempefetw MCI. Hm 9 2 7i 1 | 1 g ~ s5. Ii3 4 9n 1 0l " F sS32V P T m73F I 80 aegO-1al3F Totsi I t, Bulb q
Building and Vegetation Rasterization for the Three-dimensional Wind Field (3DWF) Model
2010-12-01
Maps API. By design, JavaScript limits access to local resources. This is done to protect against the execution of malicious code. However, ActiveX ...to only use these types of objects ( ActiveX or XPCOM) from a trusted source in order to minimize the exposure of a computer system to malware...Microsoft ActiveX . There is also a need to restructure and rethink the implementation of the JavaScript code. It would be desirable to save the digitized
Separation of Molybdenum from Acidic High-Phosphorus Tungsten Solution by Solvent Extraction
NASA Astrophysics Data System (ADS)
Li, Yongli; Zhao, Zhongwei
2017-10-01
A solvent-extraction process for deep separation of molybdenum from an acidic high-phosphate tungsten solution was developed using tributyl phosphate (TBP) as the extractant and hydrogen peroxide (H2O2) as a complexing agent. The common aqueous complexes of tungsten and molybdenum (PMoxW12-xO40 3-, x = 0-12) are depolymerized to {PO4[Mo(O)2(O-O)]4}3- and {PO4[W(O)2(O-O)]4}3- by H2O2. The former can be preferentially extracted by TBP. The extractant concentration, phase contact time, H2O2 dosage, and H2SO4 concentration were optimized. By employing 80% by volume TBP, O:A = 1:1, 1.0 mol/L H2SO4, 1.0 mol/L H3PO4, a contact time of 2 min, and a molar ratio of H2O2/(W + Mo) equal to 1.5, 60.2% molybdenum was extracted in a single stage, while limiting tungsten co-extraction to 3.2%. An extraction isotherm indicated that the raffinate could be reduced to <0.1 g/L Mo in six stages of continuous counter-current extraction.
Magnetic properties enhancement of melt spun CoZrB ribbons by elemental substitutions
NASA Astrophysics Data System (ADS)
Chang, H. W.; Tsai, C. F.; Hsieh, C. C.; Shih, C. W.; Chang, W. C.; Shaw, C. C.
2013-11-01
Effect of elemental substitution of M (M=C, Cu, Ga, Al and Si) for Zr on the magnetic properties, phase evolution, and microstructure of melt spun Co80Zr18-xMxB2 (x=0-2) ribbons have been investigated. The x-ray diffraction (XRD) and thermal magnetic analysis (TMA) results showed that two magnetically soft phases, namely fcc-Co and Co23Zr6, coexisted with hard phase Co5Zr in Co80Zr17M1B2 ribbons with M=Cu, Ga, Al and Si, while an extra unknown magnetic phase was present in ribbons with M=C. The ribbons with M=C and Si were found to improve the remanence (σr) of the Co80Zr17M1B2 ribbons. However, only M=Si could improve the whole magnetic properties, including Br, intrinsic coercivity (iHc) and energy product ((BH)max) of the above ribbons. The optimal magnetic properties of Br=5.2 kG, iHc=4.5 kOe, and (BH)max=5.3 MGOe were obtained in Co80Zr17Si1B2 ribbons, which possessed Co5Zr and minor fcc-Co phases with much finer grain size (10-30 nm) in comparison with its counterpart Co80Zr18B2 (20-60 nm).
Graphene/cobalt nanocarrier for hyperthermia therapy and MRI diagnosis.
Hatamie, Shadie; Ahadian, Mohammad Mahdi; Ghiass, Mohammad Adel; Iraji Zad, Azam; Saber, Reza; Parseh, Benyamin; Oghabian, Mohammad Ali; Shanehsazzadeh, Saeed
2016-10-01
Graphene/cobalt nanocomposites are promising materials for theranostic nanomedicine applications, which are defined as the ability to diagnose, provide targeted therapy and monitor the response to the therapy. In this study, the composites were synthesized via chemical method, using graphene oxide as the source material and assembling cobalt nanoparticles of 15nm over the surface of graphene sheets. Various characterization techniques were then employed to reveal the morphology, size and structure of the nanocomposites, such as X-ray diffraction analysis, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, high resolution transmission electron microscopy and ultraviolet visible spectroscopy. Using ion-coupled plasma optical emission spectroscopy, cobalt concentration in the nanocomposites was found to be 80%. In addition, cytotoxicity of graphene/cobalt nanocomposites were evaluated using 3-[4,5-dimethylthiazol-2yl]-2,5-diphenyltetrazolium bromide or MTT assay. MTT viability assay exhibited biocompatibility to L929 mouse fibroblasts cells, under a high dose of 100μg/mL over 24h. Hyperthermia results showed the superior conversion of electromagnetic energy into heat at 350kHz frequency for 0.01 and 0.005g/L of the nanocomposites solution. The measured heat generation and energy transfer results were anticipated by the finite element analysis, conducted for the 3D structure. Magnetic resonance imaging characteristics also showed that negatively charge graphene/cobalt nanocomposites are suitable for T1-weighted imaging. Copyright © 2016 Elsevier B.V. All rights reserved.
pH regulation in barnacle muscle fibers: dependence on extracellular sodium and bicarbonate.
Boron, W F; McCormick, W C; Roos, A
1981-01-01
Intracellular pH (pHi) regulation was studied in barnacle muscle fibers with pH-sensitive microelectrodes. The cells were acid loaded, and the subsequent recovery of pHi was monitored. The rate of recovery was reduced by one-third when external Na+ ([Na+]o) was replaced by Li+, but recovery was completely abolished when Na+ was replaced by choline or N-methyl-D-glucamine. In other experiments, varying amounts of Na+ were replaced by choline, and the acid extrusion rate, derived from the recovery rate of pHi, was calculated at a single value of pHi, 6.80. The dependence of the acid extrusion rate on [Na+]o could be described by Michaelis-Menten kinetics; at pHo (extracellular) = 8.0 and [HCO3-]o (extracellular) = 10 mM, the apparent Km and Vmax were 59 mM and 1.3 mmol x l(-1) x min-1. When [HCO3-]o was reduced to 2.5 mM at the same pHo, Km did not change significantly, but Vmax was substantially reduced. On the other hand, when pHo was reduced to 7.4 at constant [HCO3-]o, Vmax changed only slightly, but Km increased substantially. In similar experiments, we examined the dependence of the acid extrusion rate on [HCO3-]o. At pHo = 8.0 and [Na+]o = 440 mM, the apparent Km and Vmax were 4.1 mM and 2.1 mmol x 1-1 x min-1. When pHo was reduced to 7.4, Vmax was not altered, but Km substantially increased. The kinetic data are discussed in terms of the role of pHo, [Na+]o, and [HCO3-]o in the pHi-regulating system.
Kaman K-16 in 40x80 Foot Wind Tunnel at Ames Research Center.
1962-09-19
Test No. 175 Kaman K-16 in 40x80 Foot Wind Tunnel at Ames Research Center. Kaman K-16B was an experimental tilt wing aircraft, it used the fuselage of a JRF-5 and was powered by two General Electric YT58-GE-2A engines.
Marguí, E; Van Meel, K; Van Grieken, R; Buendía, A; Fontàs, C; Hidalgo, M; Queralt, I
2009-02-15
In medicinal chemistry, Pd is perhaps the most-widely utilized precious metal, as catalyst in reactions which represent key transformations toward the synthesis of new active pharmaceutical ingredients (APIs). The disadvantage of this metal-catalyzed chemistry is that expensive and toxic metal residues are invariably left bound to the desired product. Thus, stringent regulatory guidelines exist for the amount of residual Pd that a drug candidate is allowed to contain. In this work, a rapid and simple method for the determination of Pd in API samples by high-energy polarized-beam energy dispersive X-ray fluorescence spectrometry has been developed and validated according to the specification limits of current legislation (10 mg kg(-1) Pd) and the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH guidelines). Sample and calibration standards preparation includes a first step of homogenization and then, in a second step, the pressing of the powdered material into pellets without any chemical treatment. The use of several synthetic calibration standards made of cellulose to simulate the API matrix appears to be an effective means to obtain reliable calibration curves with a good spread of data points over the working range. With the use of the best measuring conditions, the limit of detection (0.11 mg kg(-1) Pd) as well as the limit of quantitation (0.37 mg kg(-1) Pd) achieved meet rigorous requirements. The repeatability of the XRF measurement appeared to be less than 2%, while the precision of the whole method was around 7%. Trueness was evaluated by analyzing spiked API samples at the level of the specification limit and calculating the recovery factor, which was better than 95%. To study the applicability of the developed methodology for the intended purpose, three batches of the studied API were analyzed for their Pd content, and the attained results were comparable to those obtained by the daily routine method (acid digestion plus atomic spectroscopy) used in most pharmaceutical laboratories.
1980-11-01
GO 80 11 DUOIERSTAOT, R S ONG, .J P SHEERIN AFOSR-80-0029 UNCLASSIFIED AFOSR-TR-81-0075 NI. i Em~hhEE~h3 I’OS . IR -0 0 7 0 1 7 7 9 7 LAJ Repo L...Theoretical Studies of Laser Light Interaction and Optical and X-Ray Emission from IDense Metallic Plasm as, ’ I ;J. J.IDUDERSTADT R. S .J( ii JP. /SHEERIN...NUMBER OF PAGES Bldg. 410, Boiling AFB, D.C. 20332 21 14. MONITORING AGENCY NAME A ADDRESS(if diffIl- i ’ to, ConIro~ling Office) IS. SECURITY CLASS
Yunes, Fabiana; Baldini, Mónica D; Gómez, Marisa A
2009-05-01
Leachate is liquid waste from refuse biological decomposition or rainwater percolation in a landfill. This research focused on leachate produced by a landfill in Bahia Blanca, Buenos Aires, Argentina. The research studied the main microbial populations involved in wastewater treatment, analyzed the behavior of bacteria isolated from leachate at different pH values, and appraised leachate biotoxicity. The number of bacteria varied by type, ranging from 1 x 10(4) to 1 x 10(5) CUF/mL aerobic heterotrophic bacteria (AHB); 1 x 10(3) to 1 x 10(5) CUF/mL anaerobic heterotrophic bacteria (ANHB); 1 x 10(5) to 1 x 10(6) CUF/mL sulfite-reducing bacteria (SRB); 1 x 10(3) to 1 x 10(6) NMP/mL nitrate-reducing bacteria (NRB); and 1 x 10(2) to 1 x 10(4) NMP/mL ammonium-oxidizing bacteria (AOB). Several microbial strains developed at pH 5, 7, and 10. These pH values changed to 9 in the culture media after a 48-hour incubation. Leachate was used to water lettuce seeds (Lactuca sativa capitata). Its toxicity was proved by full inhibition of plant development.
Phylogenetic analysis of honey bee behavioral evolution.
Raffiudin, Rika; Crozier, Ross H
2007-05-01
DNA sequences from three mitochondrial (rrnL, cox2, nad2) and one nuclear gene (itpr) from all 9 known honey bee species (Apis), a 10th possible species, Apis dorsata binghami, and three outgroup species (Bombus terrestris, Melipona bicolor and Trigona fimbriata) were used to infer Apis phylogenetic relationships using Bayesian analysis. The dwarf honey bees were confirmed as basal, and the giant and cavity-nesting species to be monophyletic. All nodes were strongly supported except that grouping Apis cerana with A. nigrocincta. Two thousand post-burnin trees from the phylogenetic analysis were used in a Bayesian comparative analysis to explore the evolution of dance type, nest structure, comb structure and dance sound within Apis. The ancestral honey bee species was inferred with high support to have nested in the open, and to have more likely than not had a silent vertical waggle dance and a single comb. The common ancestor of the giant and cavity-dwelling bees is strongly inferred to have had a buzzing vertical directional dance. All pairwise combinations of characters showed strong association, but the multiple comparisons problem reduces the ability to infer associations between states between characters. Nevertheless, a buzzing dance is significantly associated with cavity-nesting, several vertical combs, and dancing vertically, a horizontal dance is significantly associated with a nest with a single comb wrapped around the support, and open nesting with a single pendant comb and a silent waggle dance.
Investigation of 14.5mm API Self-Sealing/Crashworthy Fuel Tank Material
1974-09-01
describes the results of a f-rogram for a crashworthy, 14.5mm API tolerant fuel cell construction developed and subjected co qualification testing. The...Paragraphs 4.6.6.4 and 4.6.6.5), which were not required by contract. Two fuel tanks were built of a construction designated by The Goodyear Tire & Rubber...TABLES 3 INTRODUCTION 4 FUEL TANK MATERIAL DESIGN STUDY (TASK I) 4 QUALIFIC/.TION OF CONSTRUCTION (TASK 11) ........ 5 FUEL TANK GUNFIRE 12
NASA Astrophysics Data System (ADS)
Zhang, Fan; Lin, Qiu-Yue; Hu, Wan-Li; Song, Wen-Ji; Shen, Shu-Ting; Gui, Pan
2013-06-01
Three new transition metal complexes [Mn2(DCA)2(bipy)2]·5H2O (1), [M2(DCA)2(bipy)2(H2O)]·10H2O(M = Ni(II)(2);Zn(II)(3)), (DCA = demethylcantharate, 7-oxabicyclo[2,2,1]heptane-2,3-dicarboxylate, C8H8O5) were synthesized and characterized by elemental analysis, molar conductance, infrared spectra and X-ray diffraction techniques. Each metal ion was six-coordinated in complexes. Complex 1 has a Mn2O2 center. Complexes 2 and 3 have asymmetric binuclear structure. Great amount of intermolecular hydrogen-bonding and π-π* stacking interactions were formed in these complex structures. The DNA-binding properties of complexes were investigated by electronic absorption spectra and viscosity measurements. The DNA binding constants Kb/(L mol-1) were 1.71 × 104 (1), 2.62 × 104 (2) and 1.59 × 104 (3) at 298 K. The complexes could quench the intrinsic fluorescence of bovine serum albumin (BSA) strongly through static quenching. The protein binding constants Ka/(L mol-1) were 7.27 × 104 (1), 4.55 × 104 (2) and 7.87 × 104 L mol-1 (3) and binding site was one. The complexes bind more tightly with DNA and BSA than with ligands. Complexes 1 and 3 had stronger inhibition ratios than Na2(DCA) against human hepatoma cells (SMMC-7721) lines and human gastric cancer cells (MGC80-3) lines in vitro. Complex 3 showed the strongest antiproliferative activity against SMMC-7721 (IC50 = 29.46 ± 2.12 μmol L-1) and MGC80-3 (IC50 = 27.02 ± 2.38 μmol L-1), which shows potential in anti-cancer drug development.
Genetics Home Reference: Dandy-Walker malformation
... KA, Lehmann OJ, Hudgins L, Chizhikov VV, Bassuk AG, Ades LC, Krantz ID, Dobyns WB, Millen KJ. ... qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map Subscribe Customer Support USA. ...
Genetics Home Reference: age-related macular degeneration
... A, Tosakulwong N, Truitt BJ, Tsironi EE, Uitterlinden AG, van Duijn CM, Vijaya L, Vingerling JR, Vithana ... qualified healthcare professional . About Selection Criteria for Links Data Files & API Site Map Subscribe Customer Support USA. ...
Pharmaceutical dust exposure at pharmacies using automatic dispensing machines: a preliminary study.
Fent, Kenneth W; Durgam, Srinivas; Mueller, Charles
2014-01-01
Automatic dispensing machines (ADMs) used in pharmacies concentrate and dispense large volumes of pharmaceuticals, including uncoated tablets that can shed dust. We evaluated 43 employees' exposures to pharmaceutical dust at three pharmacies where ADMs were used. We used an optical particle counter to identify tasks that generated pharmaceutical dust. We collected 72 inhalable dust air samples in or near the employees' breathing zones. In addition to gravimetric analysis, our contract laboratory used internal methods involving liquid chromatography to analyze these samples for active pharmaceutical ingredients (APIs) and/or lactose, an inactive filler in tablets. We had to choose samples for these additional analyses because many methods used different extraction solvents. We selected 57 samples for analysis of lactose. We used real-time particle monitoring results, observations, and information from employees on the dustiness of pharmaceuticals to select 28 samples (including 13 samples that were analyzed for lactose) for analysis of specific APIs. Pharmaceutical dust was generated during a variety of tasks like emptying and refilling of ADM canisters. Using compressed air to clean canisters and manual count machines produced the overall highest peak number concentrations (19,000-580,000 particles/L) of smallest particles (count median aerodynamic diameter ≤ 2 μm). Employees who refilled, cleaned, or repaired ADM canisters, or hand filled prescriptions were exposed to higher median air concentrations of lactose (5.0-12 μg/m(3)) than employees who did other jobs (0.04-1.3 μg/m(3)), such as administrative/office work, labeling/packaging, and verifying prescriptions. We detected 10 APIs in air, including lisinopril, a drug prescribed for high blood pressure, levothyroxine, a drug prescribed for hypothyroidism, and methotrexate, a hazardous drug prescribed for cancer and other disorders. Three air concentrations of lisinopril (1.8-2.7 μg/m(3)) exceeded the lower bound of the manufacturer's hazard control band (1-10 μg/m(3)). All other API air concentrations were below applicable occupational exposure limits. Our findings indicate that some pharmacy employees are exposed to multiple APIs and that measures are needed to control those exposures.
Gisder, Sebastian; Schüler, Vivian; Horchler, Lennart L; Groth, Detlef; Genersch, Elke
2017-01-01
The Western honey bee ( Apis mellifera ) is widely used as commercial pollinator in worldwide agriculture and, therefore, plays an important role in global food security. Among the parasites and pathogens threatening health and survival of honey bees are two species of microsporidia, Nosema apis and Nosema ceranae. Nosema ceranae is considered an emerging pathogen of the Western honey bee. Reports on the spread of N. ceranae suggested that this presumably highly virulent species is replacing its more benign congener N. apis in the global A. mellifera population. We here present a 12 year longitudinal cohort study on the prevalence of N. apis and N. ceranae in Northeast Germany. Between 2005 and 2016, a cohort of about 230 honey bee colonies originating from 23 apiaries was sampled twice a year (spring and autumn) resulting in a total of 5,600 bee samples which were subjected to microscopic and molecular analysis for determining the presence of infections with N. apis or/and N. ceranae . Throughout the entire study period, both N. apis - and N. ceranae -infections could be diagnosed within the cohort. Logistic regression analysis of the prevalence data demonstrated a significant increase of N. ceranae -infections over the last 12 years, both in autumn (reflecting the development during the summer) and in spring (reflecting the development over winter) samples. Cell culture experiments confirmed that N. ceranae has a higher proliferative potential than N. apis at 27° and 33°C potentially explaining the increase in N. ceranae prevalence during summer. In autumn, characterized by generally low infection prevalence, this increase was accompanied by a significant decrease in N. apis -infection prevalence. In contrast, in spring, the season with a higher prevalence of infection, no significant decrease of N. apis infections despite a significant increase in N. ceranae infections could be observed. Therefore, our data do not support a general advantage of N. ceranae over N. apis and an overall replacement of N. apis by N. ceranae in the studied honey bee population.
Gisder, Sebastian; Schüler, Vivian; Horchler, Lennart L.; Groth, Detlef; Genersch, Elke
2017-01-01
The Western honey bee (Apis mellifera) is widely used as commercial pollinator in worldwide agriculture and, therefore, plays an important role in global food security. Among the parasites and pathogens threatening health and survival of honey bees are two species of microsporidia, Nosema apis and Nosema ceranae. Nosema ceranae is considered an emerging pathogen of the Western honey bee. Reports on the spread of N. ceranae suggested that this presumably highly virulent species is replacing its more benign congener N. apis in the global A. mellifera population. We here present a 12 year longitudinal cohort study on the prevalence of N. apis and N. ceranae in Northeast Germany. Between 2005 and 2016, a cohort of about 230 honey bee colonies originating from 23 apiaries was sampled twice a year (spring and autumn) resulting in a total of 5,600 bee samples which were subjected to microscopic and molecular analysis for determining the presence of infections with N. apis or/and N. ceranae. Throughout the entire study period, both N. apis- and N. ceranae-infections could be diagnosed within the cohort. Logistic regression analysis of the prevalence data demonstrated a significant increase of N. ceranae-infections over the last 12 years, both in autumn (reflecting the development during the summer) and in spring (reflecting the development over winter) samples. Cell culture experiments confirmed that N. ceranae has a higher proliferative potential than N. apis at 27° and 33°C potentially explaining the increase in N. ceranae prevalence during summer. In autumn, characterized by generally low infection prevalence, this increase was accompanied by a significant decrease in N. apis-infection prevalence. In contrast, in spring, the season with a higher prevalence of infection, no significant decrease of N. apis infections despite a significant increase in N. ceranae infections could be observed. Therefore, our data do not support a general advantage of N. ceranae over N. apis and an overall replacement of N. apis by N. ceranae in the studied honey bee population. PMID:28730143
Mickle, Travis C; Guenther, Sven M; Barrett, Andrew C; Roupe, Kathryn Ann; Zhou, Jing; Dickerson, Daniel; Webster, Lynn R
2017-10-28
Developing an acetaminophen-free, immediate-release hydrocodone product remains an unmet medical need; however, new opioid analgesics should not introduce new abuse risks. Benzhydrocodone is a prodrug of hydrocodone that must be metabolized into hydrocodone by enzymes in the intestinal tract to optimally deliver its pharmacologic effects. This study evaluated the intranasal pharmacokinetics and abuse potential of benzhydrocodone active pharmaceutical ingredient (API) compared with hydrocodone bitartrate (HB) API. Single-center, randomized, double-blind, crossover study. Clinical research site. Healthy adult, nondependent, recreational opioid users. Subjects (N = 51 Completers) were randomized to receive 13.34 mg of intranasal benzhydrocodone API and 15.0 mg of intranasal HB API (molar-equivalent doses of hydrocodone). Blood samples were taken, and Drug Liking scores (assessed on a bipolar visual analog scale) were obtained throughout each dosing interval. Nasal irritation and safety were assessed. Peak hydrocodone plasma concentration (Cmax) was 36.0% lower, and total hydrocodone exposures (AUClast and AUCinf) were 20.3% and 19.5% lower, respectively, for benzhydrocodone API compared with HB API (P < 0.0001). All partial AUC values were lower for benzhydrocodone API, with a ≥ 75% reduction in hydrocodone exposure at all time intervals up to one hour postdose (P < 0.0001). Median Tmax of hydrocodone following benzhydrocodone API was delayed by more than one hour compared with HB. Drug Liking score, as assessed by maximal liking (Emax), was significantly lower for benzhydrocodone API vs HB API (P = 0.004), with 45% of subjects showing a ≥ 30% reduction in Drug Liking Emax. Reductions in hydrocodone exposure and associated decreases in Drug Liking relative to HB suggest that the prodrug benzhydrocodone may deter intranasal abuse. © 2017 American Academy of Pain Medicine.
POISON SPIDER FIELD CHEMICAL FLOOD PROJECT, WYOMING
DOE Office of Scientific and Technical Information (OSTI.GOV)
Douglas Arnell; Malcolm Pitts; Jie Qi
2004-11-01
A reservoir engineering and geologic study concluded that approximate 7,852,000 bbls of target oil exits in Poison Spider. Field pore volume, OOIP, and initial oil saturation are defined. Potential injection water has a total dissolved solids content of 1,275 mg/L with no measurable divalent cations. If the Lakota water consistently has no measurable cations, the injection water does not require softening to dissolve alkali. Produced water total dissolved solids were 2,835 mg/L and less than 20 mg/L hardness as the sum of divalent cations. Produced water requires softening to dissolve chemicals. Softened produced water was used to dissolve chemicals inmore » these evaluations. Crude oil API gravity varies across the field from 19.7 to 22.2 degrees with a dead oil viscosity of 95 to 280 cp at 75 F. Interfacial tension reductions of up to 21,025 fold (0.001 dyne/cm) were developed with fifteen alkaline-surfactant combinations at some alkali concentration. An additional three alkaline-surfactant combinations reduced the interfacial tension greater than 5,000 fold. NaOH generally produced the lowest interfacial tension values. Interfacial tension values of less than 0.021 dyne/cm were maintained when the solutions were diluted with produced water to about 60%. Na{sub 2}CO{sub 3} when mixed with surfactants did not reduce interfacial tension values to levels at which incremental oil can be expected. NaOH without surfactant interfacial tension reduction is at a level where some additional oil might be recovered. Most of the alkaline-surfactant-polymer solutions producing ultra low interfacial tension gave type II- phase behavior. Only two solutions produced type III phase behavior. Produced water dilution resulted in maintenance of phase type for a number of solutions at produced water dilutions exceeding 80% dilution. The average loss of phase type occurred at 80% dilution. Linear corefloods were performed to determine relative permeability end points, chemical-rock compatibility, polymer injectivity, dynamic chemical retention by rock, and recommended injected polymer concentration. Average initial oil saturation was 0.796 Vp. Produced water injection recovered 53% OOIP leaving an average residual oil saturation of 0.375 Vp. Poison Spider rock was strongly water-wet with a mobility ratio for produced water displacing the 280 cp crude oil of 8.6. Core was not sensitive to either alkali or surfactant injection. Injectivity increased 60 to 80% with alkali plus surfactant injection. Low and medium molecular weight polyacrylamide polymers (Flopaam 3330S and Flopaam 3430S) dissolved in either an alkaline-surfactant solution or softened produced water injected and flowed through Poison Spider rock. Recommended injected polyacrylamide concentration is 2,100 mg/L for both polymers for a unit mobility ratio. Radial corefloods were performed to evaluate oil recovery efficiency of different chemical solutions. Waterflood oil recovery averaged 46.4 OOIP and alkaline-surfactant-polymer flood oil recovery averaged an additional 18.1% OIP for a total of 64.6% OOIP. Oil cut change due to injection of a 1.5 wt% Na{sub 2}CO{sub 3} plus 0.05 wt% Petrostep B-100 plus 0.05 wt% Stepantan AS1216 plus 2100 mg/L Flopaam 3430S was from 2% to a peak of 23.5%. Additional study might determine the impact on oil recovery of a lower polymer concentration. An alkaline-surfactant-polymer flood field implementation outline report was written.« less
Fluxes of 13 selected pharmaceuticals in the water cycle of Stockholm, Sweden.
Wahlberg, C; Björlenius, B; Paxéus, N
2011-01-01
Mass flows of 13 pharmaceutical active ingredients (APIS) found in drinking water were studied in the water cycle of Stockholm. Data were collected by analyzing samples of surface water, raw water and drinking water as well as influents, effluents and sludges from waste water treatment plants (WWTPs) in Stockholm area. A mass balance was performed, based on sold amounts of pharmaceuticals and the measured concentrations in water and sludge. The selected APls were all present in WWTP effluents and the removal rates for many of them were poor. Mass balance calculations showed that the three studied WWTPs in Stockholm release considerable amounts of the selected APIs into the Baltic Sea while the portions ending up in WWTP sludge were significantly lower. The levels of APIs found in drinking water are low at present, but may increase in the future unless the releases from WWTPs in the catchment of Lake Mälären are mitigated.
Liou, Li-Min; Lin, Hsiu-Fen; Huang, I-Fang; Chang, Yang-Pei; Lin, Ruey-Tay; Lai, Chiou-Lian
2013-12-01
Vertigo can be a major presentation of posterior circulation stroke and can be easily misdiagnosed because of its complicated presentation. We thus prospectively assessed the predictive value of vertebral artery extracranial color-coded duplex sonography (ECCS) for the prediction of ischemic stroke-related vertigo. The inclusion criteria were: (1) a sensation of whirling (vertigo); (2) intractable vertigo for more than 1 hour despite appropriate treatment; and (3) those who could complete cranial magnetic resonance imaging (MRI) and vertebral artery (V2 segment) ECCS studies. Eventually, 76 consecutive participants with vertigo were enrolled from Kaohsiung Municipal Hsiao-Kang Hospital, Kaohsiung, Taiwan between August 2010 and August 2011. Demographic data, neurological symptoms, neurologic examinations, and V2 ECCS were assessed. We chose the parameters of peak systolic velocity (PSV), end diastolic velocity (EDV), PSV/EDV, mean velocity (MV), resistance index (RI), and pulsatility index (PI) to represent the hemodynamics. Values from both sides of V2 segments were averaged. We then calculated the average RI (aRI), average PI (aPI), average PSV (aPSV)/EDV, and average (aMV). Axial and coronal diffusion-weighted MRI findings determined the existence of acute ischemic stroke. We grouped and analyzed participants in two ways (way I and way II analyses) based on the diffusion-weighted MRI findings (to determine whether there was acute stroke) and neurological examinations. Using way I analysis, the "MRI (+)" group had significantly higher impedance (aRI, aPI, and aPSV/EDV ratio) and lower velocity (aPSV, aEDV, and aMV(PSV + EDV/2)), compared to the "MRI (-)" group. The cutoff value/sensitivity/specificity of aPSV, aEDV, aMV, aPI, aRI, and aPSV/EDV between the MRI (+) and MRI (-) groups were 41.15/61.5/66.0 (p = 0.0101), 14.55/69.2/72.0 (p = 0.0003), 29.10/92.1/38.0 (p = 0.0013), 1.07/76.9/64.0 (p = 0.0066), 0.62/76.9/64.0 (p = 0.0076), and 2.69/80.8/66.0 (p = 0.0068), respectively. Using way II analysis, lower aEDV and aMV, and higher aRI, aPI, and aPSV/EDV ratio could determine the "MRI (+) without focal signs" group. The cutoff value/sensitivity/specificity of aEDV, aMV, aPI, aRI, and aPSV/EDV between the MRI (+) without focal signs and MRI (-) groups were 9.10/71.4/96.0 (p = 0.0005), 15.65/57.1/96.0 (p = 0.0124), 1.10/100/70.0 (p = 0.0002), 0.64/100/70.0 (p = 0.0023), and 2.80/100/70.0 (p = 0.0017), respectively. In conclusion, using demographic data and clinical symptoms, it was difficult to determine the patients with ischemic stroke-related vertigo. Although neurological examinations still have diagnostic value, the high impedance and low velocity pattern of V2 ECCS can be an add-on method for the screening of acute ischemic stroke-related vertigo, even for those without focal neurological signs. Copyright © 2013. Published by Elsevier B.V.
A New Radiofrequency Ablation Procedure to Treat Sacroiliac Joint Pain.
Cheng, Jianguo; Chen, See Loong; Zimmerman, Nicole; Dalton, Jarrod E; LaSalle, Garret; Rosenquist, Richard
2016-01-01
Low back pain may arise from disorders of the sacroiliac joint in up to 30% of patients. Radiofrequency ablation (RFA) of the nerves innervating the sacroiliac joint has been shown to be a safe and efficacious strategy. We aimed to develop a new RFA technique to relieve low back pain secondary to sacroiliac joint disorders. Methodology development with validation through prospective observational non-randomized trial (PONRT). Academic multidisciplinary health care system, Ohio, USA. We devised a guide-block to facilitate accurate placement of multiple electrodes to simultaneously ablate the L5 dorsal ramus and lateral branches of the S1, S2, and S3 dorsal rami. This was achieved by bipolar radiofrequency ablation (b-RFA) to create a strip lesion from the lateral border of the base of the sacral superior articular process (L5-S1 facet joint) to the lateral border of the S3 sacral foramen. We applied this technique in 31 consecutive patients and compared the operating time, x-ray exposure time and dose, and clinical outcomes with patients (n = 62) who have been treated with the cooled radiofrequency technique. Patients' level of pain relief was reported as < 50%, 50 - 80%, and > 80% pain relief at one, 3, 6, and 12 months after the procedure. The relationship between RFA technique and duration of pain relief was evaluated using interval-censored multivariable Cox regression. The new technique allowed reduction of operating time by more than 50%, x-ray exposure time and dose by more than 80%, and cost by more than $1,000 per case. The percent of patients who achieved > 50% pain reduction was significantly higher in the b-RFA group at 3, 6, and 12 months follow-up, compared to the cooled radiofrequency group. No complications were observed in either group. Although the major confounding factors were taken into account in the analysis, use of historical controls does not balance observed and unobserved potential confounding variables between groups so that the reported results are potentially confounded. Compared to the cooled radiofrequency ablation (c-RFA) technique, the new b-RFA technique reduced operating time by more than 50%, decreased x-ray exposure by more than 80%, and cut the cost by more than $1000 per case. The new method was associated with significantly improved clinical outcomes despite the limitations of the study design. Thus this new technique appeared to be safe, efficacious, and cost-effective. Key words: Sacroiliac joint pain, sacroiliac joint, low back pain, radiofrequency ablation (RFA), bipolar radiofrequency ablation (b-RFA), cooled radiofrequency ablation (c-RFA), cost-effectiveness.
NASA Astrophysics Data System (ADS)
Ghasemi, Elham; Kaykhaii, Massoud
2016-07-01
A novel, green, simple and fast method was developed for spectrophotometric determination of Malachite green, Crystal violet, and Rhodamine B in water samples based on Micro-cloud Point extraction (MCPE) at room temperature. This is the first report on the application of MCPE on dyes. In this method, to reach the cloud point at room temperature, the MCPE procedure was carried out in brine using Triton X-114 as a non-ionic surfactant. The factors influencing the extraction efficiency were investigated and optimized. Under the optimized condition, calibration curves were found to be linear in the concentration range of 0.06-0.60 mg/L, 0.10-0.80 mg/L, and 0.03-0.30 mg/L with the enrichment factors of 29.26, 85.47 and 28.36, respectively for Malachite green, Crystal violet, and Rhodamine B. Limit of detections were between 2.2 and 5.1 μg/L.
Ghasemi, Elham; Kaykhaii, Massoud
2016-07-05
A novel, green, simple and fast method was developed for spectrophotometric determination of Malachite green, Crystal violet, and Rhodamine B in water samples based on Micro-cloud Point extraction (MCPE) at room temperature. This is the first report on the application of MCPE on dyes. In this method, to reach the cloud point at room temperature, the MCPE procedure was carried out in brine using Triton X-114 as a non-ionic surfactant. The factors influencing the extraction efficiency were investigated and optimized. Under the optimized condition, calibration curves were found to be linear in the concentration range of 0.06-0.60mg/L, 0.10-0.80mg/L, and 0.03-0.30mg/L with the enrichment factors of 29.26, 85.47 and 28.36, respectively for Malachite green, Crystal violet, and Rhodamine B. Limit of detections were between 2.2 and 5.1μg/L. Copyright © 2016 Elsevier B.V. All rights reserved.
Zaobidna, Ewa A; Żółtowska, Krystyna; Łopieńska-Biernat, Elżbieta
2017-12-20
The ectoparasitic mite Varroa destructor has emerged as the major pest of honeybees. Despite extensive research efforts, the pathogenesis of varroosis has not been fully explained. Earlier studies suggested that V. destructor infestation leads to the suppression of the host's immune system. The aim of this study was to analyze the immune responses of 14 genes in the Toll signal transduction pathways, including effector genes of antimicrobial peptides (AMPs), in developing Apis mellifera workers and drones infested with V. destructor. Four developmental stages (L5 larvae, prepupae, and 2 pupal stages) and newly emerged imagines were analyzed. In workers, the most significant changes were observed in L5 larvae in the initial stages of infestation. A significant increase in the relative expression of 10 of the 14 analyzed genes, including defensin-1 and defensin-2, was observed in infested bees relative to non-infested individuals. The immune response in drones developed at a slower rate. The expression of genes regulating cytoplasmic signal transduction increased in prepupae, whereas the expression of defensin-1 and defensin-2 effector genes increased in P3 pupae with red eyes. The expression of many immunity-related genes was silenced in successive life stages and in imagines, and it was more profound in workers than in drones. The results indicate that V. destructor significantly influences immune responses regulated by the Toll signal transduction pathway in bees. In infested bees, the observed changes in Toll pathway genes varied between life stages and the sexes.
Optimization Process for Configuration of Flexible Joined-Wing
2004-03-01
T5NQX&bYX& hYU deZQX&N�b p hYLvVWy p SE� p SZQyvX,L � TY�qdeZM\\CTHaMShc\\�SZWN�hYdek�b p de��OZWX[TYT deZ�b p X���deZWy3klLc��kOP�NWX[b|X[ hYU deZWdeZQy...LvdeZQX&N ��deZWy�[LvZQ�&X&aWb p ST�ZWL Z oedeZWXqSh(NWX&��L hYU �SbYdeLvZ � p ShcS�[b|X[hYdeTYbYde�[Tc\\�b p X�THbYhYVW�&bYVWhcSoOL aWbYdeUd`uOS...5^5^5^5^5^5^5^;^5^5^5^5^5^ ^ev^ r X[bYX& hYU deZQX&N © aQbYdeU�So�KfLvZQnWy VWhcSbYdeL Z¿^5^5^5^5^5^ ^ev^`ª ] VW��OoedeZQy