Sample records for appendix vi calculation

  1. 40 CFR Appendix Vi to Part 266 - Stack Plume Rise

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Stack Plume Rise VI Appendix VI to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED... FACILITIES Pt. 266, App. VI Appendix VI to Part 266—Stack Plume Rise [Estimated Plume Rise (in Meters) Based...

  2. 40 CFR Appendix Vi to Part 266 - Stack Plume Rise

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Stack Plume Rise VI Appendix VI to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED... FACILITIES Pt. 266, App. VI Appendix VI to Part 266—Stack Plume Rise [Estimated Plume Rise (in Meters) Based...

  3. 40 CFR Appendix Vi to Part 1039 - Nonroad Compression-ignition Composite Transient Cycle

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Nonroad Compression-ignition Composite Transient Cycle VI Appendix VI to Part 1039 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... ENGINES Pt. 1039, App. VI Appendix VI to Part 1039—Nonroad Compression-ignition Composite Transient Cycle...

  4. 40 CFR Appendixes Vi-Vii to Part 600 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false [Reserved] VI Appendixes VI-VII to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Appendixes VI-VII to Part 600 [Reserved] ...

  5. 40 CFR Appendixes Vi-Vii to Part 600 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false [Reserved] VI Appendixes VI-VII to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Appendixes VI-VII to Part 600 [Reserved] ...

  6. 15 CFR Appendix Vi to Subpart P of... - Special-Use Areas Boundary Coordinates and Use Designations

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Special-Use Areas Boundary Coordinates and Use Designations VI Appendix VI to Subpart P of Part 922 Commerce and Foreign Trade Regulations... Florida Keys National Marine Sanctuary Pt. 922, Subpt. P, App. VI Appendix VI to Subpart P of Part 922...

  7. 15 CFR Appendix Vi to Subpart P of... - Special-Use Areas Boundary Coordinates and Use Designations

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Special-Use Areas Boundary Coordinates and Use Designations VI Appendix VI to Subpart P of Part 922 Commerce and Foreign Trade Regulations... Florida Keys National Marine Sanctuary Pt. 922, Subpt. P, App. VI Appendix VI to Subpart P of Part 922...

  8. 15 CFR Appendix Vi to Subpart P of... - Special-Use Areas Boundary Coordinates and Use Designations

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 3 2014-01-01 2014-01-01 false Special-Use Areas Boundary Coordinates and Use Designations VI Appendix VI to Subpart P of Part 922 Commerce and Foreign Trade Regulations... Florida Keys National Marine Sanctuary Pt. 922, Subpt. P, App. VI Appendix VI to Subpart P of Part 922...

  9. 40 CFR Appendix Vi to Part 261 - Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AND LISTING OF HAZARDOUS WASTE Financial Requirements for Management of Excluded Hazardous Secondary Materials Wording of the instruments. Appendix VI to Part 261 [Reserved for Etiologic Agents] ...

  10. 20 CFR Appendix Vi to Subpart C of... - Percentage of Automatic Increases in Primary Insurance Amounts Since 1978

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Percentage of Automatic Increases in Primary Insurance Amounts Since 1978 VI Appendix VI to Subpart C of Part 404 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts...

  11. 40 CFR Appendix Vi to Part 265 - Compounds With Henry's Law Constant Less Than 0.1 Y/X

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 27 2013-07-01 2013-07-01 false Compounds With Henry's Law Constant Less Than 0.1 Y/X VI Appendix VI to Part 265 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Law Constant Less Than 0.1 Y/X Compound name CAS No. Acetaldol 107-89-1 Acetamide 60-35-5 2...

  12. 40 CFR Appendix Vi to Part 265 - Compounds With Henry's Law Constant Less Than 0.1 Y/X

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Compounds With Henry's Law Constant Less Than 0.1 Y/X VI Appendix VI to Part 265 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Law Constant Less Than 0.1 Y/X Compound name CAS No. Acetaldol 107-89-1 Acetamide 60-35-5 2...

  13. 40 CFR Appendix Vi to Part 265 - Compounds With Henry's Law Constant Less Than 0.1 Y/X

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Compounds With Henry's Law Constant Less Than 0.1 Y/X VI Appendix VI to Part 265 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Law Constant Less Than 0.1 Y/X Compound name CAS No. Acetaldol 107-89-1 Acetamide 60-35-5 2...

  14. 40 CFR Appendix Vi to Part 265 - Compounds With Henry's Law Constant Less Than 0.1 Y/X

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Compounds With Henry's Law Constant Less Than 0.1 Y/X VI Appendix VI to Part 265 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Law Constant Less Than 0.1 Y/X Compound name CAS No. Acetaldol 107-89-1 Acetamide 60-35-5 2...

  15. 40 CFR Appendix Vi to Part 265 - Compounds With Henry's Law Constant Less Than 0.1 Y/X

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Compounds With Henry's Law Constant Less Than 0.1 Y/X VI Appendix VI to Part 265 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Law Constant Less Than 0.1 Y/X Compound name CAS No. Acetaldol 107-89-1 Acetamide 60-35-5 2...

  16. (20-22) Proposals to add Gerard, FL gallo-Prov. 1761, Kramer, Elench. Veg. 156, and Miller, Gard. Dict. Abr. ed. 4 1754 to the list of suppressed works in Appendix VI

    USDA-ARS?s Scientific Manuscript database

    The International Code of Nomenclature for algae, fungi and plants in its current edition, the 2012 Melbourne Code, includes in Art. 34 provisions for the suppression of names in specified publications that are listed in its Appendix VI. Any publication can be proposed for suppression, and if such a...

  17. IR Materials Producibility

    DTIC Science & Technology

    1994-02-01

    LiNbO 3. Preliminary prediction of the defect densities in X = 0.17 LWIR Hgl.xZnxTe were made and compared to results in HgCdTe. We continued to...Preliminary prediction of the defect densities in z = 0.17 LWIR Hgl-,Zn:Te. * Continued development of a method to calculate the temperature de- pendence of... LWIR HgZnTe 4 3 WIDE-GAP I-VI COMPOUNDS (ZnSe AS PROTOTYPE) 6 4 NONLINEAR OPTICAL MATERIALS (LiNb0 3 AS THE PROTOTYPE) 9 5 WORK PLANNED 9 APPENDIX A

  18. Air Force Officials did not Consistently Comply with Requirements for Assessing Contractor Performance

    DTIC Science & Technology

    2016-01-29

    31 Appendix B. Improvement in PAR Completion Statistics _________________________________ 33 vi...agencies must perform frequent evaluation of compliance with reporting requirements so they can readily identify delinquent past performance efforts...Reporting Program,” August 13, 2011 Appendixes DODIG-2016-043 │ 33 Appendix B Improvement in PAR Completion Statistics The Senate Armed Services Committee

  19. 38 CFR Appendix B to Subpart A of... - Illustrative Applications

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 General Pt. 18, Subpt. A, App. B Appendix B to Subpart... purchased or otherwise obtained by the grantee (or political subdivision) from hospitals, nursing homes...

  20. 38 CFR Appendix B to Subpart A of... - Illustrative Applications

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 General Pt. 18, Subpt. A, App. B Appendix B to Subpart... purchased or otherwise obtained by the grantee (or political subdivision) from hospitals, nursing homes...

  1. 13 CFR Appendix A to Part 112 - Appendix A to Part 112

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... FEDERALLY ASSISTED PROGRAMS OF SBA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 112, App. A...—economic injury Small Business Act, sec. 7(b)(4). Other Federal Financial Assistance Women's business...

  2. Magnetic Resonance Spectroscopy: An Objective Modality to Identify the Pathology of Breast Neoplasms

    DTIC Science & Technology

    1999-05-01

    Zealand Journal or Surgery Appendix IV: Attached Manuscript published in Life Sciences Appendix V: Attached Figures 1-13 Appendix VI: Attached Tables 1... early diagnosis and effective management. The triage of mammography, clinical examination and fine needle aspiration biopsy is currently used to...identify early breast cancers. Magnetic resonance imaging (MRI) has now been added to select women with breast abnormalities requiring biopsy. However

  3. 49 CFR Appendix B to Part 21 - Activities to Which This Part Applies When a Primary Objective of the Federal Financial...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Primary Objective of the Federal Financial Assistance Is To Provide Employment B Appendix B to Part 21... DEPARTMENT OF TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 21, App. B Appendix B to Part 21—Activities to Which This Part Applies When a Primary Objective of the Federal Financial...

  4. The Effects of Truth Bias on Artifact-User Relationships: An Investigation of Factors for Improving Deception Detection in Artifact Produced Information

    DTIC Science & Technology

    1998-08-07

    Scenarios 124 APPENDIX B - Information Manipulation Descriptions 132 vi APPENDIX C - PC-III Screens 146 APPENDIX D - Discrepancy Reporting Sheet 162...in Figure 3-2. • A rtifact Truth Bias D e c e p tio n D ete ctio n A bility t Figure 3-2 - Artifact Truth Bias and Deception Detection...discrepancy recording sheet is provided in Appendix D . For each to the courses, a series of data manipulations was incorporated into the database

  5. 29 CFR Appendix C to Subpart Cc of... - Operator Certification: Written Examination: Technical Knowledge Criteria

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... (iv) Boom cages. (v) Proximity to electric power lines, radii, and microwave structures. (5) The...-in-place and tilt-up. (vi) Demolition operations. (vii) Operations on water. (viii) Magnet operations... extensions. (vi) Lifting loads from beneath the surface of the water. (vii) Using various approved...

  6. 29 CFR Appendix C to Subpart Cc of... - Operator Certification: Written Examination: Technical Knowledge Criteria

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... (iv) Boom cages. (v) Proximity to electric power lines, radii, and microwave structures. (5) The...-in-place and tilt-up. (vi) Demolition operations. (vii) Operations on water. (viii) Magnet operations... extensions. (vi) Lifting loads from beneath the surface of the water. (vii) Using various approved...

  7. Columbia Accident Investigation Board Report. Volume Six

    NASA Technical Reports Server (NTRS)

    Barry, J. L.; Gehmann, H. W.; Deal, D. W.; Hallock, J. N.; Hess, K. W.

    2003-01-01

    In the course of its inquiry into the February 1, 2003 destruction of the Space Shuttle Columbia, the Columbia Accident Investigation Board conducted a series of public hearings at Houston, Texas; Cape Canaveral, Florida; and Washington, DC. Testimony from these hearings was recorded and then transcribed. This appendix, Volume VI of the Report, is a compilation of those transcripts. Contents: Transcripts of Board Public Hearings; Appendix H.1 March 6, 2003 Houston, Texas; Appendix H.2 March 17, 2003 Houston, Texas; Appendix H.3 March 18, 2003 Houston, Texas; Appendix H. 4 March 25, 2003 Cape Canaveral, Florida; Appendix H.5 March 26, 2003 Cape Canaveral, Florida; Appendix H.6 April 7, 2003 Houston, Texas; Appendix H.7 April 8, 2003 Houston, Texas; Appendix H.8 April 23, 2003 Houston, Texas; Appendix H.9 May 6, 2003 Houston, Texas; Appendix H.10 June 12, 2003 Washington, DC.

  8. An Analysis of the Evolution of Government Patent Policy in Research and Development Contracts.

    DTIC Science & Technology

    1981-03-01

    LAW AMENDMENTS OF 1980 ------- 94 G. SUMMARY 98 VI . CONCLUSIONS AND RECOMMENDATIONS 100 A. GENERAL --- 100 B. SUMMARY ----- 100 C. CONCLUSIONS 103 D...Note: Appendix D contains a complete text of the 1980 amendments, Public Law 96-517. Chapter VI provides a summary to the evolution of Government...to but a small percentage of Federal R & D contracts. 99 VI . CONCLUSIONS AND RECOMMENDATIONS A. GENERAL This chapter is divided into three sections

  9. 45 CFR Appendix A to Part 16 - What Disputes the Board Reviews

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... rights or nondiscrimination laws or regulations (for example, Title VI of the Civil Rights Act), or if...) Disallowances under Titles I, IV, VI, X, XIV, XVI(AABD), XIX, and XX of the Social Security Act, including... Public Health Service, including Title V of the Social Security Act. (3) Disallowances in the programs...

  10. 45 CFR Appendix A to Part 16 - What Disputes the Board Reviews

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... rights or nondiscrimination laws or regulations (for example, Title VI of the Civil Rights Act), or if...) Disallowances under Titles I, IV, VI, X, XIV, XVI(AABD), XIX, and XX of the Social Security Act, including... Public Health Service, including Title V of the Social Security Act. (3) Disallowances in the programs...

  11. 45 CFR Appendix A to Part 16 - What Disputes the Board Reviews

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... rights or nondiscrimination laws or regulations (for example, Title VI of the Civil Rights Act), or if...) Disallowances under Titles I, IV, VI, X, XIV, XVI(AABD), XIX, and XX of the Social Security Act, including... Public Health Service, including Title V of the Social Security Act. (3) Disallowances in the programs...

  12. 45 CFR Appendix A to Part 16 - What Disputes the Board Reviews

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... rights or nondiscrimination laws or regulations (for example, Title VI of the Civil Rights Act), or if...) Disallowances under Titles I, IV, VI, X, XIV, XVI(AABD), XIX, and XX of the Social Security Act, including... Public Health Service, including Title V of the Social Security Act. (3) Disallowances in the programs...

  13. 40 CFR Appendix Vi to Part 268 - Recommended Technologies To Achieve Deactivation of Characteristics in Section 268.42

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Pt. 268, App. VI....42 The treatment standard for many characteristic wastes is stated in the § 268.40 Table of Treatment... combination, can achieve the deactivation portion of the treatment standard. Characteristic wastes that are...

  14. 40 CFR Appendix Vi to Part 268 - Recommended Technologies To Achieve Deactivation of Characteristics in Section 268.42

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Pt. 268, App. VI....42 The treatment standard for many characteristic wastes is stated in the § 268.40 Table of Treatment... combination, can achieve the deactivation portion of the treatment standard. Characteristic wastes that are...

  15. 40 CFR Appendix Vi to Part 268 - Recommended Technologies To Achieve Deactivation of Characteristics in Section 268.42

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Pt. 268, App. VI....42 The treatment standard for many characteristic wastes is stated in the § 268.40 Table of Treatment... combination, can achieve the deactivation portion of the treatment standard. Characteristic wastes that are...

  16. 40 CFR Appendix Vi to Part 268 - Recommended Technologies To Achieve Deactivation of Characteristics in Section 268.42

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Pt. 268, App. VI....42 The treatment standard for many characteristic wastes is stated in the § 268.40 Table of Treatment... combination, can achieve the deactivation portion of the treatment standard. Characteristic wastes that are...

  17. 49 CFR Appendix C to Part 21 - Application of Part 21 to Certain Federal Financial Assistance of the Department of Transportation

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 21, App. C Appendix C to Part 21... Nondiscrimination on Federally Assisted Projects (a) Examples. The following examples, without being exhaustive... retained for, or incidental to, construction, planning, research, highway safety, engineering, property...

  18. 49 CFR Appendix C to Part 21 - Application of Part 21 to Certain Federal Financial Assistance of the Department of Transportation

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 21, App. C Appendix C to Part 21... Nondiscrimination on Federally Assisted Projects (a) Examples. The following examples, without being exhaustive... to, construction, planning, research, highway safety, engineering, property management, and fee...

  19. 49 CFR Appendix C to Part 21 - Application of Part 21 to Certain Federal Financial Assistance of the Department of Transportation

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 21, App. C Appendix C to Part 21... Nondiscrimination on Federally Assisted Projects (a) Examples. The following examples, without being exhaustive... retained for, or incidental to, construction, planning, research, highway safety, engineering, property...

  20. 49 CFR Appendix C to Part 21 - Application of Part 21 to Certain Federal Financial Assistance of the Department of Transportation

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 21, App. C Appendix C to Part 21... Nondiscrimination on Federally Assisted Projects (a) Examples. The following examples, without being exhaustive... retained for, or incidental to, construction, planning, research, highway safety, engineering, property...

  1. 49 CFR Appendix C to Part 21 - Application of Part 21 to Certain Federal Financial Assistance of the Department of Transportation

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 21, App. C Appendix C to Part 21... Nondiscrimination on Federally Assisted Projects (a) Examples. The following examples, without being exhaustive... retained for, or incidental to, construction, planning, research, highway safety, engineering, property...

  2. KENO-VI Primer: A Primer for Criticality Calculations with SCALE/KENO-VI Using GeeWiz

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bowman, Stephen M

    2008-09-01

    The SCALE (Standardized Computer Analyses for Licensing Evaluation) computer software system developed at Oak Ridge National Laboratory is widely used and accepted around the world for criticality safety analyses. The well-known KENO-VI three-dimensional Monte Carlo criticality computer code is one of the primary criticality safety analysis tools in SCALE. The KENO-VI primer is designed to help a new user understand and use the SCALE/KENO-VI Monte Carlo code for nuclear criticality safety analyses. It assumes that the user has a college education in a technical field. There is no assumption of familiarity with Monte Carlo codes in general or with SCALE/KENO-VImore » in particular. The primer is designed to teach by example, with each example illustrating two or three features of SCALE/KENO-VI that are useful in criticality analyses. The primer is based on SCALE 6, which includes the Graphically Enhanced Editing Wizard (GeeWiz) Windows user interface. Each example uses GeeWiz to provide the framework for preparing input data and viewing output results. Starting with a Quickstart section, the primer gives an overview of the basic requirements for SCALE/KENO-VI input and allows the user to quickly run a simple criticality problem with SCALE/KENO-VI. The sections that follow Quickstart include a list of basic objectives at the beginning that identifies the goal of the section and the individual SCALE/KENO-VI features that are covered in detail in the sample problems in that section. Upon completion of the primer, a new user should be comfortable using GeeWiz to set up criticality problems in SCALE/KENO-VI. The primer provides a starting point for the criticality safety analyst who uses SCALE/KENO-VI. Complete descriptions are provided in the SCALE/KENO-VI manual. Although the primer is self-contained, it is intended as a companion volume to the SCALE/KENO-VI documentation. (The SCALE manual is provided on the SCALE installation DVD.) The primer provides specific examples of using SCALE/KENO-VI for criticality analyses; the SCALE/KENO-VI manual provides information on the use of SCALE/KENO-VI and all its modules. The primer also contains an appendix with sample input files.« less

  3. Remote Quantification of Smokestack Total Effluent Mass Flow Rates Using Imaging Fourier-Transform Spectroscopy

    DTIC Science & Technology

    2011-03-01

    between plume and air: ∆ρρ = Tair ∆T , where Tair was taken to be 300 ◦ K and ∆T to be 100◦ K . This resulted in final values of M = 735m4/s2, B = 2999m4/s3...37 Appendix A. Extended velocity discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 vi Page Appendix B . Additional... B . Lastly, Appendix C contains MATLAB code developed specifically for the brightness feature tracking method and plume flow anal- ysis. Each primary

  4. 32 CFR Appendix A to Part 195 - Programs to Which This Part Applies

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 195, App. A Appendix A to Part 195—Programs to... Defense assistance to programs of adult education in civil defense subjects (50 United States Code App. 2281 (e), (f)). 6. Office of Civil Defense radiological instruments grants (50 United States Code App...

  5. 32 CFR Appendix A to Part 195 - Programs to Which This Part Applies

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 195, App. A Appendix A to Part 195—Programs to... Defense assistance to programs of adult education in civil defense subjects (50 United States Code App. 2281 (e), (f)). 6. Office of Civil Defense radiological instruments grants (50 United States Code App...

  6. 5 CFR Appendix C to Subpart D of... - Application of Subpart D, Part 900, to Programs Receiving Federal Financial Assistance of the...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Programs Receiving Federal Financial Assistance of the Office of Personnel Management C Appendix C to Subpart D of Part 900 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE... Programs in the Office of Personnel Management-Effectuation of Title VI of the Civil Rights Act of 1964 Pt...

  7. 14 CFR Appendix A to Part 1250 - NASA Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false NASA Federal Financial Assistance to Which... ADMINISTRATION NONDISCRIMINATION IN FEDERALLY-ASSISTED PROGRAMS OF NASA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 1250, App. A Appendix A to Part 1250—NASA Federal Financial Assistance to Which...

  8. 14 CFR Appendix A to Part 1250 - NASA Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false NASA Federal Financial Assistance to Which... ADMINISTRATION NONDISCRIMINATION IN FEDERALLY-ASSISTED PROGRAMS OF NASA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 1250, App. A Appendix A to Part 1250—NASA Federal Financial Assistance to Which...

  9. 14 CFR Appendix A to Part 1250 - NASA Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false NASA Federal Financial Assistance to Which... ADMINISTRATION NONDISCRIMINATION IN FEDERALLY-ASSISTED PROGRAMS OF NASA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 1250, App. A Appendix A to Part 1250—NASA Federal Financial Assistance to Which...

  10. Functional Integration

    NASA Astrophysics Data System (ADS)

    Cartier, Pierre; DeWitt-Morette, Cecile

    2006-11-01

    Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

  11. Functional Integration

    NASA Astrophysics Data System (ADS)

    Cartier, Pierre; DeWitt-Morette, Cecile

    2010-06-01

    Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

  12. MCNP5 CALCULATIONS REPLICATING ARH-600 NITRATE DATA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    FINFROCK SH

    This report serves to extend the previous document: 'MCNP Calculations Replicating ARH-600 Data' by replicating the nitrate curves found in ARH-600. This report includes the MCNP models used, the calculated critical dimension for each analyzed parameter set, and the resulting data libraries for use with the CritView code. As with the ARH-600 data, this report is not meant to replace the analysis of the fissile systems by qualified criticality personnel. The M CNP data is presented without accounting for the statistical uncertainty (although this is typically less than 0.001) or bias and, as such, the application of a reasonable safetymore » margin is required. The data that follows pertains to the uranyl nitrate and plutonium nitrate spheres, infinite cylinders, and infinite slabs of varying isotopic composition, reflector thickness, and molarity. Each of the cases was modeled in MCNP (version 5.1.40), using the ENDF/B-VI cross section set. Given a molarity, isotopic composition, and reflector thickness, the fissile concentration and diameter (or thicknesses in the case of the slab geometries) were varied. The diameter for which k-effective equals 1.00 for a given concentration could then be calculated and graphed. These graphs are included in this report. The pages that follow describe the regions modeled, formulas for calculating the various parameters, a list of cross-sections used in the calculations, a description of the automation routine and data, and finally the data output. The data of most interest are the critical dimensions of the various systems analyzed. This is presented graphically, and in table format, in Appendix B. Appendix C provides a text listing of the same data in a format that is compatible with the CritView code. Appendices D and E provide listing of example Template files and MCNP input files (these are discussed further in Section 4). Appendix F is a complete listing of all of the output data (i.e., all of the analyzed dimensions and the resulting k{sub eff} values).« less

  13. Dynamic Architecture Computer

    DTIC Science & Technology

    1988-12-01

    Figures ................................... v List of Tables ................................... vi I. Introduction ..................... 1 Background... 1 Problem ................................ 3 Scope .................................. 4 Approach...Collected Data on Variables ...... 136 Appendix D: Collected Data on Operations...............208 iv List of Figures Figure Page 2- 1 Keyword Search

  14. National Dam Inspection Program. Lake Jean Dam. (NDI I.D. Number PA-00570 PennDER I.D. Number 40-16) Susquehanna River Basin, Branch of Kitchen Creek, Luzerne County, Pennsylvania. Phase I Inspection Report,

    DTIC Science & Technology

    1980-07-01

    ANALYSES APPENDIX E - FIGURES APPENDIX F - GEOLOGY 1 v~i I LI PHASE I INSPECTION REPORT NATIONAL DAM INSPECTION PROGRAM LAKE JEAN DAM NDI# PA-00570...Red Rock, Pennsylvania, U.S.G.S. 7.5 minute topographic quadrangle (see Figure 1, Appendix E ). The coordinates of the dam are N41* 21.1’ and W76 0...3.1. e ). e . Ownership. Commonwealth of Pennsylvania Office of Resources Management Department of Environmental Resources P.O. Box 1467 Harrisburg

  15. LABORATORY STUDY FOR THE REDUCTION OF CHROME (VI) TO CHROME (III) USING SODIUM METABISULFITE UNDER ACIDIC CONDITIONS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DUNCAM JB; GUTHRIE MD; LUECK KJ

    2007-07-18

    This report describes the results from RPP-PLAN-32738, 'Test Plan for the Effluent Treatment Facility to Reduce Chrome(VI) to Chrome(I1I) in the Secondary Waste Stream', using sodium metabisulfite. Appendix A presents the report as submitted by the Center for Laboratory Sciences (CLS) to CH2M HILL Hanford Group, Inc. The CLS carried out the laboratory effort under Contract Number 21065, release Number 30. This report extracts the more pertinent aspects of the laboratory effort.

  16. 14 CFR Appendix A to Part 141 - Recreational Pilot Certification Course

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... navigation using pilotage with the aid of a magnetic compass; (e) Recognition of critical weather situations...) Ground reference maneuvers; (vii) Navigation; (viii) Slow flight and stalls; (ix) Emergency operations..., and go-arounds; (vi) Performance maneuvers; (vii) Navigation; (viii) Emergency operations; and (ix...

  17. 15 CFR Appendix A to Part 4 - Freedom of Information Public Inspection Facilities, and Addresses for Requests for Records Under...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., Room 1856, 915 Second Avenue, Seattle WA 98174; (206) 220-7701. (vi) Austin Regional Office, EDA, U.S. Department of Commerce, 327 Congress Avenue, Suite 200, Austin, Texas 78701; (512) 381-8169. (6...

  18. The Use of Twitter to Predict the Level of Influenza Activity in the United States

    DTIC Science & Technology

    2014-09-01

    Positive for Influenza Type A or B .......................................................................15 3. Influenza Associated Hospitalizations ...D. MODEL FOR PREDICTING NUMBER OF INFLUENZA- ASSOCIATED HOSPITALIZATIONS ......................................................60 VI. CONCLUSIONS...4. Predicted vs. Actual Rate of Influenza-Associated Hospitalizations per 100,000 Population..........................................85 APPENDIX B

  19. 34 CFR Appendix C to Part 379 - Calculating Required Matching Amount

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 2 2013-07-01 2013-07-01 false Calculating Required Matching Amount C Appendix C to Part 379 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF.... C Appendix C to Part 379—Calculating Required Matching Amount 1. The method for calculating the...

  20. 34 CFR Appendix C to Part 379 - Calculating Required Matching Amount

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true Calculating Required Matching Amount C Appendix C to Part 379 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF.... C Appendix C to Part 379—Calculating Required Matching Amount 1. The method for calculating the...

  1. Container Technology Study : Volume 2. Appendixes.

    DOT National Transportation Integrated Search

    1980-10-01

    Volume II has nine appendixes as follows: Appendix A - Railroad Flatcar Data; Appendix B - Calculations; Appendix C - Record of Telephone Calls; Appendix D - Industry Interviews; Appendix E - Field Trips and Conferences; Appendix F - Annotated biblio...

  2. 18 CFR 157.206 - Standard conditions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., as amended (16 U.S.C. 1451 et seq.); (vi) Endangered Species Act of 1973, Pub. L. 93-205, as amended... Endangered Species Act of 1973. (c) Commencement. Any authorized construction, extension, or acquisition... in appendix I of this subpart in which case the Commission finds that endangered species and their...

  3. 18 CFR 157.206 - Standard conditions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., as amended (16 U.S.C. 1451 et seq.); (vi) Endangered Species Act of 1973, Pub. L. 93-205, as amended... Endangered Species Act of 1973. (c) Commencement. Any authorized construction, extension, or acquisition... in appendix I of this subpart in which case the Commission finds that endangered species and their...

  4. 18 CFR 157.206 - Standard conditions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., as amended (16 U.S.C. 1451 et seq.); (vi) Endangered Species Act of 1973, Pub. L. 93-205, as amended... Endangered Species Act of 1973. (c) Commencement. Any authorized construction, extension, or acquisition... in appendix I of this subpart in which case the Commission finds that endangered species and their...

  5. 49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

  6. 49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

  7. 49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

  8. 32 CFR Appendix D to Part 57 - The DoD-AP

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... of the family support programs of the Military Departments. (iv) Special education teachers from the DoD school system. (v) Regular education teachers from the DoD school system. (vi) Parents of.... (viii) Institutions of higher education that prepare early intervention, special education, and related...

  9. 32 CFR Appendix D to Part 57 - The DoD-AP

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of the family support programs of the Military Departments. (iv) Special education teachers from the DoD school system. (v) Regular education teachers from the DoD school system. (vi) Parents of.... (viii) Institutions of higher education that prepare early intervention, special education, and related...

  10. Gradients and Non-Adiabatic Derivative Coupling Terms for Spin-Orbit Wavefunctions

    DTIC Science & Technology

    2011-06-01

    derivative, symmetric to the first time derivative. Solutions to the Dirac equation simultaneously satisfy the simple relativistic wave equation, the...For Pooki vi Acknowledgments I would like to thank the members of my committee for their time and...Theorem..............................................................................191 Appendix J. The Symmetric Group

  11. 40 CFR Appendix Vi to Part 86 - Vehicle and Engine Components

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... exhaust valves. (2) Drive belts. (3) Manifold and cylinder head bolts. (4) Engine oil and filter. (5...) Carburetor-idle RPM, mixture ratio. (3) Choke mechanism. (4) Fuel system filter and fuel system lines and... filter breather cap. (4) Manifold inlet (carburetor spacer, etc.). V. External Exhaust Emission Control...

  12. 40 CFR Appendix Vi to Part 86 - Vehicle and Engine Components

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... exhaust valves. (2) Drive belts. (3) Manifold and cylinder head bolts. (4) Engine oil and filter. (5...) Carburetor-idle RPM, mixture ratio. (3) Choke mechanism. (4) Fuel system filter and fuel system lines and... filter breather cap. (4) Manifold inlet (carburetor spacer, etc.). V. External Exhaust Emission Control...

  13. 40 CFR Appendix Vi to Part 86 - Vehicle and Engine Components

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... (2) Drive belts. (3) Manifold and cylinder head bolts. (4) Engine oil and filter. (5) Engine coolant...) Carburetor-idle RPM, mixture ratio. (3) Choke mechanism. (4) Fuel system filter and fuel system lines and... filter breather cap. (4) Manifold inlet (carburetor spacer, etc.). V. External Exhaust Emission Control...

  14. 40 CFR Appendix Vi to Part 86 - Vehicle and Engine Components

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... exhaust valves. (2) Drive belts. (3) Manifold and cylinder head bolts. (4) Engine oil and filter. (5...) Carburetor-idle RPM, mixture ratio. (3) Choke mechanism. (4) Fuel system filter and fuel system lines and... filter breather cap. (4) Manifold inlet (carburetor spacer, etc.). V. External Exhaust Emission Control...

  15. 40 CFR Appendix Vi to Part 86 - Vehicle and Engine Components

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... exhaust valves. (2) Drive belts. (3) Manifold and cylinder head bolts. (4) Engine oil and filter. (5...) Carburetor-idle RPM, mixture ratio. (3) Choke mechanism. (4) Fuel system filter and fuel system lines and... filter breather cap. (4) Manifold inlet (carburetor spacer, etc.). V. External Exhaust Emission Control...

  16. 12 CFR Appendix B to Part 1720 - Policy Guidance; Non-Mortgage Liquidity Investments

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... control standards; v. The limits structure; vi. The performance standards and measures; and vii. The... risk oversight group. f. The Enterprise should adopt a limit structure to promote diversification in..., management should consider the discrete risks associated with the non-mortgage liquidity investment portfolio...

  17. 12 CFR Appendix B to Part 1720 - Policy Guidance; Non-Mortgage Liquidity Investments

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... control standards; v. The limits structure; vi. The performance standards and measures; and vii. The... risk oversight group. f. The Enterprise should adopt a limit structure to promote diversification in..., management should consider the discrete risks associated with the non-mortgage liquidity investment portfolio...

  18. 12 CFR Appendix B to Part 1720 - Policy Guidance; Non-Mortgage Liquidity Investments

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... control standards; v. The limits structure; vi. The performance standards and measures; and vii. The... risk oversight group. f. The Enterprise should adopt a limit structure to promote diversification in..., management should consider the discrete risks associated with the non-mortgage liquidity investment portfolio...

  19. 12 CFR Appendix B to Part 1720 - Policy Guidance; Non-Mortgage Liquidity Investments

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... control standards; v. The limits structure; vi. The performance standards and measures; and vii. The... risk oversight group. f. The Enterprise should adopt a limit structure to promote diversification in..., management should consider the discrete risks associated with the non-mortgage liquidity investment portfolio...

  20. Guidelines and Data to Support Plans for Reallocating Food during Crisis Relocation. Regional Appendix. FEMA Region VI,

    DTIC Science & Technology

    1982-09-01

    POPLAR BLUFF MO 2 1 0 0 0 2,2-50 JONESBORO GROCER CO JOIES3ORO AR 1 I 0 0 0 0 7-0 MALONE AND HIDE INC MEMPHIS TN 4 2 I I 0 0 6,000 WETTERAU FOODS INC SCOTT...five states in FEMA Region VI ( Louisiana, Oklahoma and Texas) are largely P self-sufficient, warehousing between 75% to 97% of their food supplies...within their own borders. New Mexico and Arkansas are heavily dependent on out-of-state warehouses for food shipments, with less than one-third of their

  1. Statements Relating to the Impact of Technological Change. Technology and the American Economy, Appendix, Volume VI.

    ERIC Educational Resources Information Center

    National Commission on Technology, Automation and Economic Progress, Washington, DC.

    Forty-seven statements by industrial and business spokesmen, union and association representatives, and professors concern the broad impact of technological change on individuals, establishments, and society in general. Some of the longer presentations are (1) "The Poverty and Unemployment Crisis," by Walter Buckingham, (2) "Technological…

  2. 40 CFR Appendix Vi to Part 264 - Political Jurisdictions 1 in Which Compliance With § 264.18(a) Must Be Demonstrated

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Cassia Clark Franklin Fremont Jefferson Madison Oneida Power Teton Montana Beaverhead Broadwater Cascade Deer Lodge Flathead Gallatin Granite Jefferson Lake Lewis and Clark Madison Meagher Missoula Park... Sanpete Sevier Summit Tooele Utah Wasatch Washington Wayne Weber Washington Chelan Clallam Clark Cowlitz...

  3. 40 CFR Appendix Vi to Part 264 - Political Jurisdictions 1 in Which Compliance With § 264.18(a) Must Be Demonstrated

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Cassia Clark Franklin Fremont Jefferson Madison Oneida Power Teton Montana Beaverhead Broadwater Cascade Deer Lodge Flathead Gallatin Granite Jefferson Lake Lewis and Clark Madison Meagher Missoula Park... Sanpete Sevier Summit Tooele Utah Wasatch Washington Wayne Weber Washington Chelan Clallam Clark Cowlitz...

  4. 14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

  5. 14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

  6. 14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

  7. 14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

  8. 15 CFR Appendix A to Part 8 - Federal Financial Assistance Covered by Title VI

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to State projects designed for the research and development of commercial fisheries resources of the... U.S.C. 1151-1161). National Bureau of Standards 1. Grants to universities and other research organizations for fire research and safety programs (15 U.S.C. 278f). National Fire Prevention and Control...

  9. 15 CFR Appendix A to Part 8 - Federal Financial Assistance Covered by Title VI

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to State projects designed for the research and development of commercial fisheries resources of the... U.S.C. 1151-1161). National Bureau of Standards 1. Grants to universities and other research organizations for fire research and safety programs (15 U.S.C. 278f). National Fire Prevention and Control...

  10. 15 CFR Appendix A to Part 8 - Federal Financial Assistance Covered by Title VI

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to State projects designed for the research and development of commercial fisheries resources of the... U.S.C. 1151-1161). National Bureau of Standards 1. Grants to universities and other research organizations for fire research and safety programs (15 U.S.C. 278f). National Fire Prevention and Control...

  11. 15 CFR Appendix A to Part 8 - Federal Financial Assistance Covered by Title VI

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to State projects designed for the research and development of commercial fisheries resources of the... U.S.C. 1151-1161). National Bureau of Standards 1. Grants to universities and other research organizations for fire research and safety programs (15 U.S.C. 278f). National Fire Prevention and Control...

  12. 15 CFR Appendix A to Part 8 - Federal Financial Assistance Covered by Title VI

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to State projects designed for the research and development of commercial fisheries resources of the... U.S.C. 1151-1161). National Bureau of Standards 1. Grants to universities and other research organizations for fire research and safety programs (15 U.S.C. 278f). National Fire Prevention and Control...

  13. Formic acid interaction with the uranyl(VI) ion: structural and photochemical characterization.

    PubMed

    Lucks, Christian; Rossberg, André; Tsushima, Satoru; Foerstendorf, Harald; Fahmy, Karim; Bernhard, Gert

    2013-10-07

    Complex formation between the uranyl(VI) ion and formic acid was studied by infrared absorption (IR) and X-ray absorption (EXAFS) spectroscopy as well as density functional theory (DFT) calculations. In contrast to the acetate ion which forms exclusively a bidentate complex with uranyl(VI), the formate ion binds to uranyl(VI) in a unidentate fashion. The photochemistry of the uranyl(VI)-formic acid system was explored by DFT calculations and photoreduction of uranyl(VI) in the presence of formic acid was found to occur via an intermolecular process, that is, hydrogen abstraction from hydrogenformate by the photo-excited uranyl(VI). There is no photo-induced decarboxylation of uranyl(VI) formate via an intramolecular process, presumably due to lack of a C=C double bond.

  14. Shielding Analysis of a Small Compact Space Nuclear Reactor

    DTIC Science & Technology

    1987-08-01

    RESPONSE) =4, MAXWELLIAN FISSION SPECTRUM (ILNTEGRAL RESPONSE) =5, LOS ALAMOS FISSION SPECTRUM, 1982 (INTEGRAL RESPONSE) =6, VITAMIN C NEUTRON SPECTRUM...Appendices Appendix A: Calculations of Effective Radii.. A-1 Appendix B: Atom Density Calculations for FEMPlD and FEMP2D ................ B-I Appendix C ...FEMPID and FEM22D Data........... C -i Appendix D: Energy Group Definition .......... D-I Appendix E: Transport Equation, Legendr4 Polynomial

  15. 10 CFR Appendix to Part 474 - Sample Petroleum-Equivalent Fuel Economy Calculations

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Sample Petroleum-Equivalent Fuel Economy Calculations Appendix to Part 474 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION Pt. 474, App. Appendix to Part 474—Sample...

  16. 34 CFR Appendix B to Part 300 - Proportionate Share Calculation

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true Proportionate Share Calculation B Appendix B to Part 300... CHILDREN WITH DISABILITIES Pt. 300, App. B Appendix B to Part 300—Proportionate Share Calculation Each LEA... special education and related services under Part B, as compared with the total number of eligible...

  17. 40 CFR Appendix D to Part 72 - Calculation of Potential Electric Output Capacity

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Calculation of Potential Electric Output Capacity D Appendix D to Part 72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PERMITS REGULATION Pt. 72, App. D Appendix D to Part 72—Calculation of...

  18. 40 CFR Appendix D to Part 72 - Calculation of Potential Electric Output Capacity

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Calculation of Potential Electric Output Capacity D Appendix D to Part 72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PERMITS REGULATION Pt. 72, App. D Appendix D to Part 72—Calculation of...

  19. 40 CFR Appendix D to Part 72 - Calculation of Potential Electric Output Capacity

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Calculation of Potential Electric Output Capacity D Appendix D to Part 72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PERMITS REGULATION Pt. 72, App. D Appendix D to Part 72—Calculation of...

  20. High efficiency vapor-fed AMTEC system for direct conversion. Appendices for final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Anderson, W.G.; Bland, J.J.

    1997-05-23

    This report consists of four appendices for the final report. They are: Appendix A: 700 C Vapor-Fed AMTEC Cell Calculations; Appendix B: 700 C Vapor-Fed AMTEC Cell Parts Drawings; Appendix C: 800 C Vapor-Fed AMTEC Cell Calculations; and Appendix D: 800 C Wick-Pumped AMTEC Cell System Design.

  1. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (...

  2. 43 CFR Appendix A to Part 418 - Calculation of Efficiency Equation

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Calculation of Efficiency Equation A Appendix A to Part 418 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION.... 418, App. A Appendix A to Part 418—Calculation of Efficiency Equation ER18DE97.008 ER18DE97.009 ...

  3. 43 CFR Appendix A to Part 418 - Calculation of Efficiency Equation

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Calculation of Efficiency Equation A Appendix A to Part 418 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION.... 418, App. A Appendix A to Part 418—Calculation of Efficiency Equation ER18DE97.008 ER18DE97.009 ...

  4. Advanced Concepts of Naval Engineering Maintenance Training. Volume 2. Appendix F

    DTIC Science & Technology

    1976-05-01

    maintenance instruction, the Hagan Automatic Boiler Control (ABC) course. These job requirements also included the tasks, skills, and knowledges for all...Pressure 1 3/4 NAVTRAEQÜIPCEN 74-C-0151-1 TABLE OF CONTENTS VOLUME II OF II APPENDIX F Page Hagan Automatic Boiler Controls Systems (FAS) 6...a c a ■* w ■H u 0 M « s? u ’• B n J-riH 3 o c 0 hhO a a o -i •H -I 0 -H 9J ■ a a oi « C -a u <rl « vi) •a - 8 ai >> u u

  5. 45 CFR Appendix C to Part 1356 - Calculating Sample Size for NYTD Follow-Up Populations

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 4 2013-10-01 2013-10-01 false Calculating Sample Size for NYTD Follow-Up Populations C Appendix C to Part 1356 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE... REQUIREMENTS APPLICABLE TO TITLE IV-E Pt. 1356, App. C Appendix C to Part 1356—Calculating Sample Size for NYTD...

  6. Physiochemical/Rheological Control of Nonmetallic Materials.

    DTIC Science & Technology

    1982-08-01

    CONCLUSIONS ... .. .. . .oo.. .. .. .. .. .. .. .... 23 APPENDIX A - Infrared Spectra of Nonmetallic Consumables .. ......... 24 77’. 1SN 7.. Tiii LIST OF...Spectrometer IR Infrared Spectroscopy GC Gas Chromatrography MS Mass Spectrometry * DSC Differenitial Scanning Calorimetry RT Room Temperature ET Elevated...Linear Heating Rate *FTIR Fourier Transform Infrared TGA Thermogravimetric Analysis Vi 1.0 INTRODUCTION AND SUOARY Over the past 10 years

  7. 12 CFR Appendix B to Part 741 - Guidance for an Interest Rate Risk Policy and an Effective Program

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Measurement Methods C. Components of IRR Measurement Methods V. Internal Controls VI. Decision-Making Informed... effective IRR management program identifies, measures, monitors, and controls IRR and is central to safe and... critical to the control of IRR exposure. All FICUs required to have an IRR policy and program should...

  8. 12 CFR Appendix B to Part 741 - Guidance for an Interest Rate Risk Policy and an Effective Program

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Measurement Methods C. Components of IRR Measurement Methods V. Internal Controls VI. Decision-Making Informed... effective IRR management program identifies, measures, monitors, and controls IRR and is central to safe and... critical to the control of IRR exposure. All FICUs required to have an IRR policy and program should...

  9. Reference Manual, Background Materials for the CONUS Volumes,

    DTIC Science & Technology

    1983-04-25

    operating cathode tube. He demonstrated that invisible rays emanating from the cathode tube were responsible for darken- ing the film. He called these...N 141 - - -. , * -.. *** *** ~ .*.( .*~- - ’.- - * -.-. - -. APPENDIX B (continued) AM n i in vi U% V’ I-I- 4 i nCA 4 CA le3 i 3 A .US w4 w’ . a L" P

  10. Combustion Science to Reduce PM Emissions for Military Platforms

    DTIC Science & Technology

    2012-01-01

    355 7.0 References 356 Appendix: List of Archival Publications and Conference Papers 376 vi List...carbonaddition HITRAN Database of infra-red spectra HP High Pressure HW Harris and Weiner ICCD Intensified charge coupled device ID internal diameter IR ...archival publication based on this work received a distinguished outstanding paper award at the 32nd International Combustion Symposium

  11. 77 FR 24436 - Approval and Promulgation of Air Quality Implementation Plans; Wisconsin; Milwaukee-Racine...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-24

    .... How did EPA address missing data? V. Proposed Action VI. What is the effect of this action? VII.... ** Indicates incomplete data due to monitor shut down. IV. How did EPA address missing data? Appendix N of 40... in Milwaukee, where there are missing or incomplete data due to monitor shutdown or other factors...

  12. 14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... hub design. (iii) Changes in the governor or control design. (iv) Installation of a propeller governor.... (iv) Engine mounts. (v) Control system. (vi) Landing gear. (vii) Hull or floats. (viii) Elements of an... of gravity limits of the aircraft. (xii) Changes to the basic design of the fuel, oil, cooling...

  13. 33 CFR Appendix A to Part 173 - Issuing Authorities and Reporting Authorities

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Carolina—NC. North Dakota—ND. Northern Mariana Islands—CM. Ohio—OH. Oklahoma—OK. Oregon—OR. Pennsylvania—PA. Puerto Rico—PR. Rhode Island—RI. South Carolina—SC. South Dakota—SD. Tennessee—TN. Texas—TX. Utah—UT. Vermont—VT. Virginia—VA. Virgin Islands—VI. Washington—WN. West Virginia—WV. Wisconsin—WS. Wyoming—WY. (b...

  14. 33 CFR Appendix A to Part 173 - Issuing Authorities and Reporting Authorities

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Carolina—NC. North Dakota—ND. Northern Mariana Islands—CM. Ohio—OH. Oklahoma—OK. Oregon—OR. Pennsylvania—PA. Puerto Rico—PR. Rhode Island—RI. South Carolina—SC. South Dakota—SD. Tennessee—TN. Texas—TX. Utah—UT. Vermont—VT. Virginia—VA. Virgin Islands—VI. Washington—WN. West Virginia—WV. Wisconsin—WS. Wyoming—WY. (b...

  15. 33 CFR Appendix A to Part 173 - Issuing Authorities and Reporting Authorities

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Carolina—NC. North Dakota—ND. Northern Mariana Islands—CM. Ohio—OH. Oklahoma—OK. Oregon—OR. Pennsylvania—PA. Puerto Rico—PR. Rhode Island—RI. South Carolina—SC. South Dakota—SD. Tennessee—TN. Texas—TX. Utah—UT. Vermont—VT. Virginia—VA. Virgin Islands—VI. Washington—WN. West Virginia—WV. Wisconsin—WS. Wyoming—WY. (b...

  16. 33 CFR Appendix A to Part 173 - Issuing Authorities and Reporting Authorities

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Carolina—NC. North Dakota—ND. Northern Mariana Islands—CM. Ohio—OH. Oklahoma—OK. Oregon—OR. Pennsylvania—PA. Puerto Rico—PR. Rhode Island—RI. South Carolina—SC. South Dakota—SD. Tennessee—TN. Texas—TX. Utah—UT. Vermont—VT. Virginia—VA. Virgin Islands—VI. Washington—WN. West Virginia—WV. Wisconsin—WS. Wyoming—WY. (b...

  17. Emissivity of Rocket Plume Particulates

    DTIC Science & Technology

    1992-09-01

    V. EXPERIMENTAL RESULTS ........ ............... 29 VI. CONCLUSIONS AND RECOMMENDATIONS .... ........ 32 APPENDIX A. CATS -E SOFTWARE...interfaced through the CATS E Thermal Analysis software, which is MS-DOS based, and can be run on any 28b or higher CPU. This system allows real-time...body source to establish the parameters required by the CATS program for proper microscope/scanner interface. A complete description of microscope

  18. 40 CFR Appendix Vi to Part 268 - Recommended Technologies To Achieve Deactivation of Characteristics in Section 268.42

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .../subcategory Nonwastewaters Wastewaters D001 Ignitable Liquids based on 261.21(a)(1)—Low TOC Nonwastewater Subcategory (containing 1% to TOC) RORGSINCIN WETOX CHOXD BIODG n.a. D001 Ignitable Liquids based on 261.21(a)(1)—Ignitable Wastewater Subcategory (containing TOC) n.a. RORGSINCIN WETOX CHOXD BIODG D001...

  19. Structural and elastic properties of AIBIIIC 2 VI semiconductors

    NASA Astrophysics Data System (ADS)

    Kumar, V.; Singh, Bhanu P.

    2018-01-01

    The plane wave pseudo-potential method within density functional theory has been used to calculate the structural and elastic properties of AIBIIIC 2 VI semiconductors. The electronic band structure, density of states, lattice constants (a and c), internal parameter (u), tetragonal distortion (η), energy gap (Eg), and bond lengths of the A-C (dAC) and B-C (dBC) bonds in AIBIIIC 2 VI semiconductors have been calculated. The values of elastic constants (Cij), bulk modulus (B), shear modulus (G), Young's modulus (Y), Poisson's ratio (υ), Zener anisotropy factor (A), Debye temperature (ϴD) and G/B ratio have also been calculated. The values of all 15 parameters of CuTlS2 and CuTlSe2 compounds, and 8 parameters of 20 compounds of AIBIIIC 2 VI family, except AgInS2 and AgInSe2, have been calculated for the first time. Reasonably good agreement has been obtained between the calculated, reported and available experimental values.

  20. 10 CFR Appendix to Part 474 - Sample Petroleum-Equivalent Fuel Economy Calculations

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Sample Petroleum-Equivalent Fuel Economy Calculations..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION Pt. 474, App. Appendix to Part 474—Sample Petroleum-Equivalent Fuel Economy Calculations Example 1: An electric vehicle is...

  1. 10 CFR Appendix to Part 474 - Sample Petroleum-Equivalent Fuel Economy Calculations

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Sample Petroleum-Equivalent Fuel Economy Calculations..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION Pt. 474, App. Appendix to Part 474—Sample Petroleum-Equivalent Fuel Economy Calculations Example 1: An electric vehicle is...

  2. 10 CFR Appendix to Part 474 - Sample Petroleum-Equivalent Fuel Economy Calculations

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Sample Petroleum-Equivalent Fuel Economy Calculations..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION Pt. 474, App. Appendix to Part 474—Sample Petroleum-Equivalent Fuel Economy Calculations Example 1: An electric vehicle is...

  3. 10 CFR Appendix to Part 474 - Sample Petroleum-Equivalent Fuel Economy Calculations

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Sample Petroleum-Equivalent Fuel Economy Calculations..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION Pt. 474, App. Appendix to Part 474—Sample Petroleum-Equivalent Fuel Economy Calculations Example 1: An electric vehicle is...

  4. Remedial Investigation Badger Army Ammunition Plant, Baraboo, Wisconsin. Volume 3. Appendices G Through J

    DTIC Science & Technology

    1991-01-01

    B~est Availlable COPY AD-A280 438’El UlHI~ll lIMEll l Ulll "U.S. Army Environmental Center 7C, 0* £0 t;,2.’ . .. US AR.Y E[N,’IP r TM,’.F A, CENtIR...Split Groundwater Samples Vol. 6 APPENDIX M - CALCULATIONS FOR PARAMETERS USED IN RISK ASSESSMENT Vol. 7 APPENDIX N - IRIS FILES FOR COMPOUNDS OF...POTENTIAL CONCERN Vol. 7 APPENDIX 0 - HUMAN HEALTH RISK CALCULATIONS Vol. 7 APPENDIX P - INVENTORY OF SITE SPECIES Vol. 7 APPENDIX Q - EXPOSURE

  5. Surface Charge Transfer Doping via Transition Metal Oxides for Efficient p-Type Doping of II-VI Nanostructures.

    PubMed

    Xia, Feifei; Shao, Zhibin; He, Yuanyuan; Wang, Rongbin; Wu, Xiaofeng; Jiang, Tianhao; Duhm, Steffen; Zhao, Jianwei; Lee, Shuit-Tong; Jie, Jiansheng

    2016-11-22

    Wide band gap II-VI nanostructures are important building blocks for new-generation electronic and optoelectronic devices. However, the difficulty of realizing p-type conductivity in these materials via conventional doping methods has severely handicapped the fabrication of p-n homojunctions and complementary circuits, which are the fundamental components for high-performance devices. Herein, by using first-principles density functional theory calculations, we demonstrated a simple yet efficient way to achieve controlled p-type doping on II-VI nanostructures via surface charge transfer doping (SCTD) using high work function transition metal oxides such as MoO 3 , WO 3 , CrO 3 , and V 2 O 5 as dopants. Our calculations revealed that these oxides were capable of drawing electrons from II-VI nanostructures, leading to accumulation of positive charges (holes injection) in the II-VI nanostructures. As a result, Fermi levels of the II-VI nanostructures were shifted toward the valence band regions after surface modifications, along with the large enhancement of work functions. In situ ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy characterizations verified the significant interfacial charge transfer between II-VI nanostructures and surface dopants. Both theoretical calculations and electrical transfer measurements on the II-VI nanostructure-based field-effect transistors clearly showed the p-type conductivity of the nanostructures after surface modifications. Strikingly, II-VI nanowires could undergo semiconductor-to-metal transition by further increasing the SCTD level. SCTD offers the possibility to create a variety of electronic and optoelectronic devices from the II-VI nanostructures via realization of complementary doping.

  6. 40 CFR Appendix C to Part 72 - Actual 1985 Yearly SO2 Emissions Calculation

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Actual 1985 Yearly SO2 Emissions Calculation C Appendix C to Part 72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PERMITS REGULATION Pt. 72, App. C Appendix C to Part 72—Actual 1985 Yearly SO2...

  7. 40 CFR Appendix C to Part 72 - Actual 1985 Yearly SO2 Emissions Calculation

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Actual 1985 Yearly SO2 Emissions Calculation C Appendix C to Part 72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PERMITS REGULATION Pt. 72, App. C Appendix C to Part 72—Actual 1985 Yearly SO2...

  8. 40 CFR Appendix C to Part 72 - Actual 1985 Yearly SO2 Emissions Calculation

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Actual 1985 Yearly SO2 Emissions Calculation C Appendix C to Part 72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PERMITS REGULATION Pt. 72, App. C Appendix C to Part 72—Actual 1985 Yearly SO2...

  9. Review of Army Analysis. Volume 2. Appendixes C-M

    DTIC Science & Technology

    1979-04-01

    In most Army studies, the identifica-tion of new or changed alternatives occurs during the study de - spite efforts at early deflnition, Study...in time to support each major acquisition de -V..i cision milestone, Operational testing activities are similiarly timed, Thus, it frequently occurs...Engineer School i. Transportation School J. Quarter Master School k. Missile & Munition School 1. Intelligence School ! m. Signal School ii. Military

  10. Research on Aero-Thermodynamic Distortion Induced Structural Dynamic Response of Multi-Stage Compressor Blading.

    DTIC Science & Technology

    1988-01-15

    However. only very engineering limited experimental data exists to assess the Director, Thermal Sciences and range of validity and to direct the... experimental results of Goldstein et. al. "A 1111 and also the Navier Stokes numerical solutions of Morihara 1121. Diffuser The predicted stream function...Unsteady Aerodynamic Interactions in a Multistage Compressor............................................................ 53 I APPENDIX VI. Experimental

  11. 40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sample Fuel Economy Label Calculation III Appendix III to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. III Appendix III to Part 600—Sample Fuel Economy Label...

  12. 34 CFR Appendix C to Subpart B of... - 90/10 Revenue Calculation

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false 90/10 Revenue Calculation C Appendix C to Subpart B of Part 668 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF... Participation in Title IV, HEA Programs Pt. 668, Subpt. B, App. C Appendix C to Subpart B of Part 668—90/10...

  13. General Conformity Training Modules: Appendix A Sample Emissions Calculations

    EPA Pesticide Factsheets

    Appendix A of the training modules gives example calculations for external and internal combustion sources, construction, fuel storage and transfer, on-road vehicles, aircraft operations, storage piles, and paved roads.

  14. [New Retrieval Algorithms for Geophysical Products from GLI and MODIS Data

    NASA Technical Reports Server (NTRS)

    Dodge, James C.; Simpson, James J.

    2004-01-01

    Below is the 1st year progress report for NAG5-13435 "New Retrieval Algorithms for Geophysical Products from GLI and MODIS Data". Activity on this project has been coordinated with our NASA DB project NAG5-9604. For your convenience, this report has six sections and an Appendix. Sections I - III discuss specific activities undertaken during the past year to analyze/use MODIS data. Section IV formally states our intention to no longer pursue any research using JAXA's (formerly NASDA's) GLI instrument which catastrophically failed very early after launch (also see the Appendix). Section V provides some indications of directions for second year activities based on our January 2004 telephone discussions and email exchanges. A brief summary is given in Section VI.

  15. A modified model for calculating lattice thermal expansion of I{sub 2}-IV-VI{sub 3} and I{sub 3}-V-VI{sub 4} tetrahedral compounds

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Omar, M.S.

    2007-05-03

    A general empirical formula was found for calculating lattice thermal expansion for compounds having their properties extended for compound groups having different mean ionicity as well as more than one type of cation atoms with that of different numbers of them such as I{sub 2}-IV-VI{sub 3} and I{sub 3}-V-VI{sub 4}. The difference in the valence electrons for cations and anions in the compound was used to correlate the deviations caused by the compound ionicity. The ionicity effects, which are due to their different numbers for their types, were also added to the correlation equation. In general, the lattice thermal expansionmore » for a compound semiconductor can be calculated from a relation containing melting point, mean atomic distance and number of valence electrons for the atoms forming the compound. The mean ionicity for the group compounds forming I{sub 2}-IV-VI{sub 3} was found to be 0.323 and 0.785 for the ternary group compounds of I{sub 3}-V-VI{sub 4}.« less

  16. A System Approach to Navy Medical Education and Training. Appendix 30. Curriculum for General Hospital Corpsman.

    DTIC Science & Technology

    1974-08-31

    vision, guidance and outstanding direction of Ouida C. Upchurch, Capt., NC, USN, Project Manager. 1 TABLE OF CONTENTS Unit Page IA INTRODUCTION TO THE...DEPARTMENT .. ......... ... 19 ICI. Orientation to the Navy Medical Department ... ...... 21 ID INTRODUCTION TO OBSERVATION, COMMUNICATION, AND INSTRUCTIONAL...Surgical Wounds: Irrigations .... ............ ... 597 IR8. Surgical Wounds: Suture Removal .. .......... ... 601 vi AhI TRAINING UNIT IA INTRODUCTION TO

  17. Options Available for Providing Family Housing to Navy Families in the Continental United States

    DTIC Science & Technology

    1994-06-01

    the Revitalization Backlog 64 4. Revise VHA and BAQ Determination Procedures 65 C. FUTURE RESEARCH ........ ................ .. 65 APPENDIX...OVERVIEW Succeeding chapters will research the three family housing options in detail and conclude with recommendations. Chapter II will provide an...advantages and disadvantages of each of the three options. Chapter VI will provide an analysis of the research leading to the conclusions and recommendations

  18. Investigations Concerning Hydrolysis and Stabilization of Antiradiation Compounds

    DTIC Science & Technology

    1982-01-01

    a. HPLC Unit A 3 b. HPLC Unit B 3 c. Solvents 3 d. Reagents 3 B. In Vivo Studies 3 C. Microencapsulation 4 1. Materials 4 a... Microencapsulation 63 VI. CONCLUSIONS 64 VII. RECOMMENDATIONS 65 LITERATURE CITED 66 APPENDU A - IN VIVO PILOT STUDIES 67 APPENDIX B...stomach. One convenient method of applying such a coating is microencapsulation , a process which may subject the drug to elevated temperatures

  19. 24 CFR Appendix A to Part 4001 - Calculation of Upfront Payment or Future Appreciation Payment

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... to Housing and Urban Development (Continued) BOARD OF DIRECTORS OF THE HOPE FOR HOMEOWNERS PROGRAM HOPE FOR HOMEOWNERS PROGRAM Pt. 4001, App. A Appendix A to Part 4001—Calculation of Upfront Payment or...

  20. A General Application Computer-Assisted Instruction System for Microcomputers.

    DTIC Science & Technology

    1987-09-01

    question pages. Variable branching is allowed from question pages depending on student answer input. Lesson size (i.e., number of vi 15511P11’P,6i 1111 kcj5...stocks, maldistribution of stocks, and accumulation and disposal of excess stocks. [ 10 :Appendix, 1]. These deficiencies also indicate a loss of...operations. 1- 10 II. Literature Review The computer is incredibly fast, accurate, and stupid. Man is unbelievably slow, inaccurate, and brilliant. The

  1. Single Crystal Diffractometry

    NASA Astrophysics Data System (ADS)

    Arndt, U. W.; Willis, B. T. M.

    2009-06-01

    Preface; Acknowledgements; Part I. Introduction; Part II. Diffraction Geometry; Part III. The Design of Diffractometers; Part IV. Detectors; Part V. Electronic Circuits; Part VI. The Production of the Primary Beam (X-rays); Part VII. The Production of the Primary Beam (Neutrons); Part VIII. The Background; Part IX. Systematic Errors in Measuring Relative Integrated Intensities; Part X. Procedure for Measuring Integrated Intensities; Part XI. Derivation and Accuracy of Structure Factors; Part XII. Computer Programs and On-line Control; Appendix; References; Index.

  2. 15 CFR Appendix Vi to Subpart P of... - Special-Use Areas Boundary Coordinates and Use Designations

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...)—[Based on differential Global Positioning Systems data] Point Latitude Longitude 1 24 deg.56.83′ N 80 deg... Global Positioning Systems data] Point Latitude Longitude 1 24 deg.29.84′ N 81 deg.39.59′ W. 2 24 deg.29....29.84′ N 81 deg.39.59′ W. Looe Key (Research Only)—[Based on differential Global Positioning Systems...

  3. High-pT Physics in the Heavy Ion Era

    NASA Astrophysics Data System (ADS)

    Rak, Jan; Tannenbaum, Michael J.

    2013-04-01

    1. Introduction and overview; 2. Basic observables; 3. Some experimental techniques; 4. The search for structure; 5. Origins of high pT physics - the search for the W boson; 6. Discovery of hard scattering in p-p collisions; 7. Direct single lepton production and the discovery of charm; 8. J/ ψ, u and Drell-Yan pair production; 9. Two particle correlations; 10. Direct photon production; 11. The search for jets; 12. QCD in hard scattering; 13. Heavy ion physics in the high pT era; 14. RHIC and LHC; Appendix A. Probability and statistics; Appendix B. Methods of Monte Carlo calculations; Appendix C. TAB and the Glauber Monte Carlo calculation; Appendix D. Fits including systematic errors; Appendix E. The shape of the xE distribution triggered by a jet fragment, for example, π0; Appendix F. kT phenomenology and Gaussian smearing; References; Index.

  4. Stellar laboratories . IX. New Se v, Sr iv-vii, Te vi, and I vi oscillator strengths and the Se, Sr, Te, and I abundances in the hot white dwarfs G191-B2B and RE 0503-289

    NASA Astrophysics Data System (ADS)

    Rauch, T.; Quinet, P.; Knörzer, M.; Hoyer, D.; Werner, K.; Kruk, J. W.; Demleitner, M.

    2017-10-01

    Context. To analyze spectra of hot stars, advanced non-local thermodynamic equilibrium (NLTE) model-atmosphere techniques are mandatory. Reliable atomic data is crucial for the calculation of such model atmospheres. Aims: We aim to calculate new Sr iv-vii oscillator strengths to identify for the first time Sr spectral lines in hot white dwarf (WD) stars and to determine the photospheric Sr abundances. To measure the abundances of Se, Te, and I in hot WDs, we aim to compute new Se v, Te vi, and I vi oscillator strengths. Methods: To consider radiative and collisional bound-bound transitions of Se v, Sr iv - vii, Te vi, and I vi in our NLTE atmosphere models, we calculated oscillator strengths for these ions. Results: We newly identified four Se v, 23 Sr v, 1 Te vi, and three I vi lines in the ultraviolet (UV) spectrum of RE 0503-289. We measured a photospheric Sr abundance of 6.5+ 3.8-2.4× 10-4 (mass fraction, 9500-23 800 times solar). We determined the abundances of Se (1.6+ 0.9-0.6× 10-3, 8000-20 000), Te (2.5+ 1.5-0.9× 10-4, 11 000-28 000), and I (1.4+ 0.8-0.5× 10-5, 2700-6700). No Se, Sr, Te, and I line was found in the UV spectra of G191-B2B and we could determine only upper abundance limits of approximately 100 times solar. Conclusions: All identified Se v, Sr v, Te vi, and I vi lines in the UV spectrum of RE 0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26666. Based on observations made with the NASA-CNES-CSA Far Ultraviolet Spectroscopic Explorer. Full Tables A.15 to A.21 are only available via the German Astrophysical Virtual Observatory (GAVO) service TOSS (http://dc.g-vo.org/TOSS).

  5. 40 CFR Appendix Vi to Part 600 - Sample Fuel Economy Labels and Style Guidelines for 2013 and Later Model Years

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... printed on white or very light paper. Any label markings for which colors are not specified must be in black and white as shown. Some portions of the label must be filled with a blue or blue-shaded color as specified in subpart D of this part. Use the color blue defined in CMYK values of 40c-10m-0y-0k, or it may...

  6. 40 CFR Appendix Vi to Part 600 - Sample Fuel Economy Labels and Style Guidelines for 2013 and Later Model Years

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... printed on white or very light paper. Any label markings for which colors are not specified must be in black and white as shown. Some portions of the label must be filled with a blue or blue-shaded color as specified in subpart D of this part. Use the color blue defined in CMYK values of 40c-10m-0y-0k, or it may...

  7. 40 CFR Appendix Vi to Part 600 - Sample Fuel Economy Labels and Style Guidelines for 2013 and Later Model Years

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... printed on white or very light paper. Any label markings for which colors are not specified must be in black and white as shown. Some portions of the label must be filled with a blue or blue-shaded color as specified in subpart D of this part. Use the color blue defined in CMYK values of 40c-10m-0y-0k, or it may...

  8. 50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

  9. 50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

  10. 50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

  11. 50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

  12. 50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

  13. Remarks on Certain Aspects of Solid Explosive Detonation Via Small Projectile Impact

    DTIC Science & Technology

    1989-05-01

    S [CURITY CL.ASSIFICATION OF TWI.rI5rAG Form, Approved REPORT DOCUMENTATION PAGE OMS 4o 0 7U -0188 __________________________________________I Exp...PIERFORMIWG OftGANLZATION REPO"t NUM5ER( S S . MONITORING ORGANIZATION REPORT NUMBER( S ) RDl-SS-88-11. b B. NAME Of PtRFORMIPANG O*CLANLZATION 6 b. DFfsC...SHOCK VELOCITY (U s ), AND PROJECTILE IMPACT VELOCITY VI) .................................... A-I APPENDIX B - SHOCK COMPRESSION INFORMATION FOR

  14. Use of a tibial accelerometer to measure ground reaction force in running: A reliability and validity comparison with force plates.

    PubMed

    Raper, Damian P; Witchalls, Jeremy; Philips, Elissa J; Knight, Emma; Drew, Michael K; Waddington, Gordon

    2018-01-01

    The use of microsensor technologies to conduct research and implement interventions in sports and exercise medicine has increased recently. The objective of this paper was to determine the validity and reliability of the ViPerform as a measure of load compared to vertical ground reaction force (GRF) as measured by force plates. Absolute reliability assessment, with concurrent validity. 10 professional triathletes ran 10 trials over force plates with the ViPerform mounted on the mid portion of the medial tibia. Calculated vertical ground reaction force data from the ViPerform was matched to the same stride on the force plate. Bland-Altman (BA) plot of comparative measure of agreement was used to assess the relationship between the calculated load from the accelerometer and the force plates. Reliability was calculated by intra-class correlation coefficients (ICC) with 95% confidence intervals. BA plot indicates minimal agreement between the measures derived from the force plate and ViPerform, with variation at an individual participant plot level. Reliability was excellent (ICC=0.877; 95% CI=0.825-0.917) in calculating the same vertical GRF in a repeated trial. Standard error of measure (SEM) equalled 99.83 units (95% CI=82.10-119.09), which, in turn, gave a minimum detectable change (MDC) value of 276.72 units (95% CI=227.32-330.07). The ViPerform does not calculate absolute values of vertical GRF similar to those measured by a force plate. It does provide a valid and reliable calculation of an athlete's lower limb load at constant velocity. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  15. Atoms and Molecules Interacting with Light

    NASA Astrophysics Data System (ADS)

    van der Straten, Peter; Metcalf, Harold

    2016-02-01

    Part I. Atom-Light Interaction: 1. The classical physics pathway; Appendix 1.A. Damping force on an accelerating charge; Appendix 1.B. Hanle effect; Appendix 1.C. Optical tweezers; 2. Interaction of two-level atoms and light; Appendix 2.A. Pauli matrices for motion of the bloch vector; Appendix 2.B. The Ramsey method; Appendix 2.C. Echoes and interferometry; Appendix 2.D. Adiabatic rapid passage; Appendix 2.E Superposition and entanglement; 3. The atom-light interaction; Appendix 3.A. Proof of the oscillator strength theorem; Appendix 3.B. Electromagnetic fields; Appendix 3.C. The dipole approximation; Appendix 3.D. Time resolved fluorescence from multi-level atoms; 4. 'Forbidden' transitions; Appendix 4.A. Higher order approximations; 5. Spontaneous emission; Appendix 5.A. The quantum mechanical harmonic oscillator; Appendix 5.B. Field quantization; Appendix 5.C. Alternative theories to QED; 6. The density matrix; Appendix 6.A. The Liouville-von Neumann equation; Part II. Internal Structure: 7. The hydrogen atom; Appendix 7.A. Center-of-mass motion; Appendix 7.B. Coordinate systems; Appendix 7.C. Commuting operators; Appendix 7.D. Matrix elements of the radial wavefunctions; 8. Fine structure; Appendix 8.A. The Sommerfeld fine-structure constant; Appendix 8.B. Measurements of the fine structure 9. Effects of the nucleus; Appendix 9.A. Interacting magnetic dipoles; Appendix 9.B. Hyperfine structure for two spin =2 particles; Appendix 9.C. The hydrogen maser; 10. The alkali-metal atoms; Appendix 10.A. Quantum defects for the alkalis; Appendix 10.B. Numerov method; 11. Atoms in magnetic fields; Appendix 11.A. The ground state of atomic hydrogen; Appendix 11.B. Positronium; Appendix 11.C. The non-crossing theorem; Appendix 11.D. Passage through an anticrossing: Landau-Zener transitions; 12. Atoms in electric fields; 13. Rydberg atoms; 14. The helium atom; Appendix 14.A. Variational calculations; Appendix 14.B. Detail on the variational calculations of the ground state; 15. The periodic system of the elements; Appendix 15. A paramagnetism; Appendix 15.B. The color of gold; 16. Molecules; Appendix 16.A. Morse potential; 17. Binding in the hydrogen molecule; Appendix 17.A. Confocal elliptical coordinates; Appendix 17.B. One-electron two-center integrals; Appendix 17.C. Electron-electron interaction in molecular hydrogen; 18. Ultra-cold chemistry; Part III. Applications: 19. Optical forces and laser cooling; 20. Confinement of neutral atoms; 21. Bose-Einstein condensation; Appendix 21.A. Distribution functions; Appendix 21.B. Density of states; 22. Cold molecules; 23. Three level systems; Appendix 23.A. General Case for _1 , _2; 24. Fundamental physics; Part IV. Appendices: Appendix A. Notation and definitions; Appendix B. Units and notation; Appendix C. Angular momentum in quantum mechanics; Appendix D. Transition strengths; References; Index.

  16. Stellar Laboratories: New GeV and Ge VI Oscillator Strengths and their Validation in the Hot White Dwarf RE0503-289

    NASA Technical Reports Server (NTRS)

    Rauch, T.; Werner, K.; Biemont, E.; Quinet, P.; Kruk, J. W.

    2013-01-01

    State-of-the-art spectral analysis of hot stars by means of non-LTE model-atmosphere techniques has arrived at a high level of sophistication. The analysis of high-resolution and high-S/N spectra, however, is strongly restricted by the lack of reliable atomic data for highly ionized species from intermediate-mass metals to trans-iron elements. Especially data for the latter has only been sparsely calculated. Many of their lines are identified in spectra of extremely hot, hydrogen-deficient post-AGB stars. A reliable determination of their abundances establishes crucial constraints for AGB nucleosynthesis simulations and, thus, for stellar evolutionary theory. Aims. In a previous analysis of the UV spectrum of RE 0503-289, spectral lines of highly ionized Ga, Ge, As, Se, Kr, Mo, Sn, Te, I, and Xe were identified. Individual abundance determinations are hampered by the lack of reliable oscillator strengths. Most of these identified lines stem from Ge V. In addition, we identified Ge VI lines for the first time. We calculated Ge V and Ge VI oscillator strengths in order to reproduce the observed spectrum. Methods. We newly calculated Ge V and Ge VI oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our non-LTE stellar-atmosphere models for the analysis of the Ge IV-VI spectrum exhibited in high-resolution and high-S/N FUV (FUSE) and UV (ORFEUS/BEFS, IUE) observations of RE 0503-289. Results. In the UV spectrum of RE 0503-289, we identify four Ge IV, 37 Ge V, and seven Ge VI lines. Most of these lines are identified for the first time in any star. We can reproduce almost all Ge IV, GeV, and Ge VI lines in the observed spectrum of RE 0503-289 (T(sub eff) = 70 kK, log g = 7.5) at log Ge = -3.8 +/- 0.3 (mass fraction, about 650 times solar). The Ge IV/V/VI ionization equilibrium, that is a very sensitive T(sub eff) indicator, is reproduced well. Conclusions. Reliable measurements and calculations of atomic data are a prerequisite for stellar-atmosphere modeling. Our oscillator-strength calculations have allowed, for the first time, Ge V and Ge VI lines to be successfully reproduced in a white dwarf s (RE 0503-289) spectrum and to determine its photospheric Ge abundance.

  17. 12 CFR Appendix A to Part 325 - Statement of Policy on Risk-Based Capital

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... qualifying and excess capital, calculate risk-weighted assets, calculate market risk equivalent assets and... and control financial and operating risks, including the risk presented by concentrations of credit....(6)(ii) of this appendix A), and subsidiaries that are engaged in non-financial activities are not...

  18. 34 CFR Appendix B to Part 300 - Proportionate Share Calculation

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CHILDREN WITH DISABILITIES Pt. 300, App. B Appendix B to Part 300—Proportionate Share Calculation Each LEA... the parentally-placed private school children with disabilities enrolled in private elementary schools... LEA's subgrant under section 611(f) of the Act for children with disabilities aged 3 through 21. This...

  19. 34 CFR Appendix C to Part 379 - Calculating Required Matching Amount

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Calculating Required Matching Amount C Appendix C to Part 379 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION PROJECTS WITH INDUSTRY Pt. 379, App...

  20. 12 CFR Appendix A to Part 1030 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... stated maturity greater than one year. A. General Rules Except as provided in Part I.E. of this appendix, the annual percentage yield shall be calculated by the formula shown below. Institutions shall... the formula, institutions shall assume that all principal and interest remain on deposit for the...

  1. 12 CFR Appendix A to Part 1030 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... stated maturity greater than one year. A. General Rules Except as provided in Part I.E. of this appendix, the annual percentage yield shall be calculated by the formula shown below. Institutions shall... the formula, institutions shall assume that all principal and interest remain on deposit for the...

  2. 12 CFR Appendix A to Part 325 - Statement of Policy on Risk-Based Capital

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... qualifying and excess capital, calculate risk-weighted assets, calculate market risk equivalent assets and... and control financial and operating risks, including the risk presented by concentrations of credit....(6)(ii) of this appendix A), and subsidiaries that are engaged in non-financial activities are not...

  3. 12 CFR Appendix A to Part 325 - Statement of Policy on Risk-Based Capital

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... qualifying and excess capital, calculate risk-weighted assets, calculate market risk equivalent assets and... and control financial and operating risks, including the risk presented by concentrations of credit....(6)(ii) of this appendix A), and subsidiaries that are engaged in non-financial activities are not...

  4. 12 CFR Appendix A to Part 325 - Statement of Policy on Risk-Based Capital

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... qualifying and excess capital, calculate risk-weighted assets, calculate market risk equivalent assets and... and control financial and operating risks, including the risk presented by concentrations of credit....(6)(ii) of this appendix A), and subsidiaries that are engaged in non-financial activities are not...

  5. Decontamination Efficacy of Candidate Nanocrystalline Sorbents with Comparison to SDS A-200 Sorbent: Reactivity and Chemical Agent Resistant Coating Panel Testing

    DTIC Science & Technology

    2010-11-01

    o c © — r~ t-~ — oc O ir> r-^ TT ^t TJ-’ — o vc r» r- r-» t-~ r-- (•- vo flj c o •a c 3 — sO — ^O — vC — O^ O (N ro V...i o APPENDIX B 36 60 ON NO o o s. — Z : • PL E a. X r °- u f- — t t ^ E ^/j E. ° r * C^ o & rt ^— ; tO d | TD L c E- ° es t...8217 u. % APPENDIX B 54 H c S-m., -E ao "C ^-^ — ’-> 1 s. 0 c A X - u — li- „_ ra - Sfj Z. o o- _ c* c — 3 o TD : n

  6. Enhanced adsorption of U(VI) and 241Am(III) from wastewater using Ca/Al layered double hydroxide@carbon nanotube composites.

    PubMed

    Chen, Haijun; Chen, Zhe; Zhao, Guixia; Zhang, Zhibin; Xu, Chao; Liu, Yunhai; Chen, Jing; Zhuang, Li; Haya, Tasawar; Wang, Xiangke

    2018-04-05

    Ca/Al layered double hydroxide decorated carbon nanotube (Ca/Al-LDH@CNTs) composites were fabricated by co-precipitation method and hydrothermal aged treatment. The prepared Ca/Al-LDH@CNTs was characterized by SEM, TEM, EDS, XRD, FT-IR, UV-vis and XPS techniques, and applied to remove U(VI) from aqueous solutions under various environmental conditions (i.e., pH, ionic strength, temperature and contact time). The results indicated that the adsorption of U(VI) on Ca/Al-LDH@CNTs was four times higher than that of U(VI) on bare CNTs. The kinetic investigations reflected the chemisorption of U(VI) on Ca/Al-LDH@CNTs through oxygen-containing functional groups. The adsorption isotherms demonstrated that the adsorption of U(VI) was well fitted by Langmuir model and the maximum adsorption capacity of U(VI) on Ca/Al-LDH@CNTs was calculated to be 382.9 mg g -1 at 289.15 K. The thermodynamic parameters calculated from temperature-dependent isotherms suggested that U(VI) adsorption on Ca/Al-LDH@CNTs were endothermic and spontaneous process. Furthermore, Ca/Al-LDH@CNTs could remove ∼91% of 241 Am(III) at pH = 8.0, which confirmed Ca/Al-LDH@CNTs as a promising material for multiply low level radionuclides' pollution remediation. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Chromium (Ⅵ) removal from aqueous solutions through powdered activated carbon countercurrent two-stage adsorption.

    PubMed

    Wang, Wenqiang

    2018-01-01

    To exploit the adsorption capacity of commercial powdered activated carbon (PAC) and to improve the efficiency of Cr(VI) removal from aqueous solutions, the adsorption of Cr(VI) by commercial PAC and the countercurrent two-stage adsorption (CTA) process was investigated. Different adsorption kinetics models and isotherms were compared, and the pseudo-second-order model and the Langmuir and Freundlich models fit the experimental data well. The Cr(VI) removal efficiency was >80% and was improved by 37% through the CTA process compared with the conventional single-stage adsorption process when the initial Cr(VI) concentration was 50 mg/L with a PAC dose of 1.250 g/L and a pH of 3. A calculation method for calculating the effluent Cr(VI) concentration and the PAC dose was developed for the CTA process, and the validity of the method was confirmed by a deviation of <5%. Copyright © 2017. Published by Elsevier Ltd.

  8. 12 CFR Appendix G to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Internal-Ratings-Based and Advanced...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... calculated under this appendix by the bank holding company for one or more exposures is not commensurate with... appendix, a bank holding company may choose not to apply a provision of this appendix to one or more...

  9. 12 CFR Appendix C to Part 3 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... determines that the risk-weighted asset amount calculated under this appendix by the bank for one or more... appendix, a bank may choose not to apply a provision of this appendix to one or more exposures, provided...

  10. 12 CFR Appendix C to Part 3 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... determines that the risk-weighted asset amount calculated under this appendix by the bank for one or more... appendix, a bank may choose not to apply a provision of this appendix to one or more exposures, provided...

  11. 49 CFR Appendix A-I to Part 541 - Lines With Antitheft Devices Which Are Exempted From the Parts-Marking Requirements of This...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    .... X3. X4.1 X5. Z4. 1 Car Line. 3 Car Line. 4 Car Line. 5 Car Line. 6 Car Line. 7 Car Line. CHRYSLER....1 Civic. Acura TL. HYUNDAI Azera. Genesis. Equus (originally codenamed VI). JAGUAR F-Type. XJ. XK... Quattroporte. MAZDA 2. 3. 5. 6. CX-5. CX-7. CX-9. MX-5 Miata. Tribute. MERCEDES-BENZ smart USA fortwo. SL-Line...

  12. Lidar performance analysis

    NASA Technical Reports Server (NTRS)

    Spiers, Gary D.

    1994-01-01

    Section 1 details the theory used to build the lidar model, provides results of using the model to evaluate AEOLUS design instrument designs, and provides snapshots of the visual appearance of the coded model. Appendix A contains a Fortran program to calculate various forms of the refractive index structure function. This program was used to determine the refractive index structure function used in the main lidar simulation code. Appendix B contains a memo on the optimization of the lidar telescope geometry for a line-scan geometry. Appendix C contains the code for the main lidar simulation and brief instruction on running the code. Appendix D contains a Fortran code to calculate the maximum permissible exposure for the eye from the ANSI Z136.1-1992 eye safety standards. Appendix E contains a paper on the eye safety analysis of a space-based coherent lidar presented at the 7th Coherent Laser Radar Applications and Technology Conference, Paris, France, 19-23 July 1993.

  13. Radiation Chemistry of Acetohydroxamic Acid in the UREX Process

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Karraker, D.G.

    2002-07-31

    The UREX process is being developed to process irradiated power reactor elements by dissolution in nitric acid and solvent extraction by a variation of the PUREX process.1 Rather than recovering both U and Pu, as in Purex, only U will be recovered by solvent extraction, hence the name ''UREX.'' A complexing agent, acetohydroxamic acid (AHA), will be added to the scrub stream to prevent the extraction of Pu(IV) and Np(VI). AHA (CH3C=ONHOH) is decomposed to gaseous products in waste evaporation, so no solid waste is generated by its addition. AHA is hydrolyzed in acid solution to acetic acid and hydroxylaminemore » at a rate dependent on the acid concentration.2-4 The fuel to be processed is ca 40 years cooled, 30,000-50,000 MWD/MT material; although only a few fission products remain, the Pu isotopes and 241Am generate a radiation field estimated to be 2.6E+02R during processing. (see Appendix for calculation.) This study was conducted to determine the effect of this level of radiation on the stability of AHA during processing.« less

  14. Preliminary design report for OTEC stationkeeping subsystems (SKSS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1979-12-12

    Lockheed Ocean Systems with IMODCO prepared these preliminary designs for OTEC Stationkeeping Subsystems (SKSS) under contract to NOAA in support of the Department of Energy OTEC program. The results of Tasks III, V, and VI are presented in this design report. The report consists of five sections: introduction, preliminary designs for the multiple anchor leg (MAL) and tension anchor leg (TAL), costs and schedule, and conclusions. Extensive appendixes provide detailed descriptions of design methodology and include backup calculations and data to support the results presented. The objective of this effort is to complete the preliminary designs for the barge-MAL andmore » Spar-TAL SKSS. A set of drawings is provided for each which show arrangements, configuration, component details, engineering description, and deployment plan. Loads analysis, performance assessment, and sensitivity to requirements are presented, together with the methodology employed to analyze the systems and to derive the results presented. Life cycle costs and schedule are prepared and compared on a common basis. Finally, recommendations for the Commercial Plant SKSS are presented for both platform types.« less

  15. Uranium(VI) Binding Forms in Selected Human Body Fluids: Thermodynamic Calculations versus Spectroscopic Measurements.

    PubMed

    Osman, Alfatih A A; Geipel, Gerhard; Barkleit, Astrid; Bernhard, Gert

    2015-02-16

    Human exposure to uranium increasingly becomes a subject of interest in many scientific disciplines such as environmental medicine, toxicology, and radiation protection. Knowledge about uranium chemical binding forms(speciation) in human body fluids can be of great importance to understand not only its biokinetics but also its relevance in risk assessment and in designing decorporation therapy in the case of accidental overexposure. In this study, thermodynamic calculations of uranium speciation in relevant simulated and original body fluids were compared with spectroscopic data after ex-situ uranium addition. For the first time, experimental data on U(VI) speciation in body fluids (saliva, sweat, urine) was obtained by means of cryogenic time-resolved laser-induced fluorescence spectroscopy (cryo-TRLFS) at 153 K. By using the time dependency of fluorescence decay and the band positions of the emission spectra, various uranyl complexes were demonstrated in the studied samples. The variations of the body fluids in terms of chemical composition, pH, and ionic strength resulted in different binding forms of U(VI). The speciation of U(VI) in saliva and in urine was affected by the presence of bioorganic ligands, whereas in sweat, the distribution depends mainly on inorganic ligands. We also elucidated the role of biological buffers, i.e., phosphate (H(2)PO(4−)/HPO(4)(2−)) on U(VI) distribution, and the system Ca(2+)/UO(2)(2+)/PO(4)(3−) was discussed in detail in both saliva and urine. The theoretical speciation calculations of the main U(VI) species in the investigated body fluids were significantly consistent with the spectroscopic data. Laser fluorescence spectroscopy showed success and reliability for direct determination of U(VI) in such biological matrices with the possibility for further improvement.

  16. Indexes of temporal myocardial repolarization dispersion and sudden cardiac death in heart failure: any difference?

    PubMed

    Piccirillo, Gianfranco; Rossi, Pietro; Mitra, Marilena; Quaglione, Raffaele; Dell'Armi, Annalaura; Di Barba, Daniele; Maisto, Damiana; Lizio, Andrea; Barillà, Francesco; Magrì, Damiano

    2013-03-01

    The QT variability index, calculated between Q- and the T-wave end (QTend VI), is an index of temporal myocardial repolarization lability associated with sudden cardiac death (SCD) in chronic heart failure (CHF). Little is known about temporal variability in the other two temporal myocardial repolarization descriptors obtained from Q-Tpeak and Tpeak -Tend intervals. We therefore investigated differences between these indexes in patients with CHF who died suddenly and in those who survived with a left ventricular ejection fraction (LVEF) ≤35% or >35%. We selected 127 ECG and systolic blood pressure (SPB) recordings from outpatients with CHF all of whom had been followed up for 30 months. We calculated RR and SPB variability by power spectral analysis and QTend VI, QTpeak VI, Tpeak Tend VI. We then subdivided data patients into three groups SCD, LVEF ≤ 35%, and LVEF > 35%. The LVEF was higher in the SCD than in the LVEF ≤ 35% group, whereas no difference was found between the SCD and LVEF > 35% groups. QTend VI, QTpeak VI, and Tpeak Tend VI were higher in the SCD and LVEF ≤ 35% groups than in the LVEF > 35% group. Multivariate analysis detected a negative relationship between all repolarization variability indexes, low frequency obtained from RR intervals and LVEF. Our data show that variability in the first (QTpeak VI) and second halves of the QT interval (Tpeak -Tend VI) significantly contributes to the QTend VI in patients with CHF. Further studies should investigate whether these indexes might help stratify the risk of SCD in patients with a moderately depressed LVEF. ©2012, Wiley Periodicals, Inc.

  17. Criticality calculations of the Very High Temperature reactor Critical Assembly benchmark with Serpent and SCALE/KENO-VI

    DOE PAGES

    Bostelmann, Friederike; Hammer, Hans R.; Ortensi, Javier; ...

    2015-12-30

    Within the framework of the IAEA Coordinated Research Project on HTGR Uncertainty Analysis in Modeling, criticality calculations of the Very High Temperature Critical Assembly experiment were performed as the validation reference to the prismatic MHTGR-350 lattice calculations. Criticality measurements performed at several temperature points at this Japanese graphite-moderated facility were recently included in the International Handbook of Evaluated Reactor Physics Benchmark Experiments, and represent one of the few data sets available for the validation of HTGR lattice physics. Here, this work compares VHTRC criticality simulations utilizing the Monte Carlo codes Serpent and SCALE/KENO-VI. Reasonable agreement was found between Serpent andmore » KENO-VI, but only the use of the latest ENDF cross section library release, namely the ENDF/B-VII.1 library, led to an improved match with the measured data. Furthermore, the fourth beta release of SCALE 6.2/KENO-VI showed significant improvements from the current SCALE 6.1.2 version, compared to the experimental values and Serpent.« less

  18. 40 CFR Appendix I to Subpart B of... - Appendix I to Subpart B of Part 205

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...: Acceleration Test: Deceleration Test: Acceleration Test Run No. 1 2 3 4 5 dBA Left Right Highest RPM attained in End Zone Calculated Sound Pressure dBA Deceleration Test with Exhaust Brake Applied dBA Left Right Calculated Sound Pressure dBA TEST Personnel: (Name) Recorded By: Date:......... (Signature) Supervisor...

  19. 40 CFR Appendix I to Subpart B of... - Appendix I to Subpart B of Part 205

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...: Acceleration Test: Deceleration Test: Acceleration Test Run No. 1 2 3 4 5 dBA Left Right Highest RPM attained in End Zone Calculated Sound Pressure dBA Deceleration Test with Exhaust Brake Applied dBA Left Right Calculated Sound Pressure dBA TEST Personnel: (Name) Recorded By: Date:......... (Signature) Supervisor...

  20. 12 CFR Appendix A to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Risk-Based Measure

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CONTROL (REGULATION Y) Pt. 225, App. A Appendix A to Part 225—Capital Adequacy Guidelines for Bank Holding... (Basle Supervisors' Committee) and endorsed by the Group of Ten Central Bank Governors. The framework is...-weighted assets, calculate market risk equivalent assets, and calculate risk-based capital ratios adjusted...

  1. 12 CFR Appendix A to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Risk-Based Measure

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CONTROL (REGULATION Y) Pt. 225, App. A Appendix A to Part 225—Capital Adequacy Guidelines for Bank Holding... (Basle Supervisors' Committee) and endorsed by the Group of Ten Central Bank Governors. The framework is...-weighted assets, calculate market risk equivalent assets, and calculate risk-based capital ratios adjusted...

  2. Structure evolution of mononuclear tungsten and molybdenum species in the protonation process: Insight from FPMD and DFT calculations

    NASA Astrophysics Data System (ADS)

    Zhang, Ning; Yi, Haibo; Zeng, Dewen; Zhao, Zhongwei; Wang, Wenlei; Costanzo, Francesca

    2018-03-01

    In this work, we apply static density functional theory (DFT) calculations, as well as classical and first-principles molecular dynamics (FPMD) simulations, using the free-energy perturbation method to study the protonation ability, active site and structures of W(VI) and Mo(VI) in acidic aqueous solution. Using FPMD simulations, utilizing the pKa's calculation technique, we concluded that the octahedral WO2(OH)2(H2O)2 is the true formula for tungstic acid (H2WO4), and the hydroxyl ligands are the acidic site. This aqueous structure of H2WO4 is analogous to the previously reported structure of molybdic acid (H2MoO4). The FPMD trajectories of the tungstic acid deprotonation show that the mono-protonated monotungstate ion (HWO4-) may partially exist as a five-coordinated WO3(OH)(H2O)- species except for the four-coordinated WO3(OH)- species. This result is supported by DFT calculations, with an isoenergetic point (ΔE = 1.9 kcal·mol-1) for the WO3(OH)(H2O)- and WO3(OH)- species, when explicit solvent molecules are taken into account. In contrast, for the H2MoO4 acid, FPMD trajectories during the deprotonation process show that two H2O ligands immediately escape from the first coordinated sphere of Mo(VI) to form the four-coordinated MoO3(OH)- species. This difference indicates that structural expansion of W(VI) began in the first protonated step, while that of Mo(VI) only occurs in the second step. In addition, our calculated first and second acid constants for tungstic acid are higher than previously reported values for molybdic acid. This result suggests that WO42- is more easily protonated than the MoO42- anion in the same acidic solution, which is further confirmed by DFT calculations of hydrated oxoanions and its protonated species, based upon the hydration energy.

  3. Spectral analysis of the UFBG-based acousto—optical modulator in V-I transmission matrix formalism

    NASA Astrophysics Data System (ADS)

    Wu, Liang-Ying; Pei, Li; Liu, Chao; Wang, Yi-Qun; Weng, Si-Jun; Wang, Jian-Shuai

    2014-11-01

    In this study, the V-I transmission matrix formalism (V-I method) is proposed to analyze the spectrum characteristics of the uniform fiber Bragg grating (FBG)-based acousto—optic modulators (UFBG-AOM). The simulation results demonstrate that both the amplitude of the acoustically induced strain and the frequency of the acoustic wave (AW) have an effect on the spectrum. Additionally, the wavelength spacing between the primary reflectivity peak and the secondary reflectivity peak is proportional to the acoustic frequency with the ratio 0.1425 nm/MHz. Meanwhile, we compare the amount of calculation. For the FBG whose period is M, the calculation of the V-I method is 4 × (2M-1) in addition/subtraction, 8 × (2M - 1) in multiply/division and 2M in exponent arithmetic, which is almost a quarter of the multi-film method and transfer matrix (TM) method. The detailed analysis indicates that, compared with the conventional multi-film method and transfer matrix (TM) method, the V-I method is faster and less complex.

  4. 76 FR 53497 - Florida Power and Light Company; St. Lucie Plant, Units 1 and 2; Environmental Assessment and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-26

    ... Appendix G to the Code for calculating K IM factors, and instead applies FEM [finite element modeling..., Units 1 and 2 are calculated using the CE NSSS finite element modeling methods. The Need for the... Society of Mechanical Engineers (ASME) Code, Section XI, Appendix G) or determined by applying finite...

  5. 40 CFR Appendix E to Part 63 - Monitoring Procedure for Nonthoroughly Mixed Open Biological Treatment Systems at Kraft Pulp...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... for each data set that is collected during the initial performance test. A single composite value of... Multiple Zone Concentrations Calculations Procedure based on inlet and outlet concentrations (Column A of... composite value of Ks discussed in section III.C of this appendix. This value of Ks is calculated during the...

  6. a New ENDF/B-VII.0 Based Multigroup Cross-Section Library for Reactor Dosimetry

    NASA Astrophysics Data System (ADS)

    Alpan, F. A.; Anderson, S. L.

    2009-08-01

    The latest of the ENDF/B libraries, ENDF/B-VII.0 was released in December 2006. In this paper, the ENDF/B-VII.O evaluations were used in generating a new coupled neutron/gamma multigroup library having the same group structure of VITAMIN-B6, i.e., the 199-neutron, 42-gamma group library. The new library was generated utilizing NJOY99.259 for pre-processing and the AMPX modules for post-processing of cross sections. An ENDF/B-VI.3 based VITAMIN-B6-like library was also generated. The fine-group libraries and the ENDF/B-VI.3 based 47-neutron, 20-gamma group BUGLE-96 library were used with the discrete ordinates code DORT to obtain a three-dimensional synthesized flux distribution from r, r-θ, and r-z models for a standard Westinghouse 3-loop design reactor. Reaction rates were calculated for ex-vessel neutron dosimetry containing 63Cu(n,α)60Co, 46Ti(n,p)46Sc, 54Fe(n,P)54Mn, 58Ni(n,P)58Co, 238U(n,f)137Cs, 237Np(n,f)137Cs, and 59Co(n,γ)60Co (bare and cadmium covered) reactions. Results were compared to measurements. In comparing the 199-neutron, 42-gamma group ENDF/B-VI.3 and ENDF/B-VII.O libraries, it was observed that the ENDF/B-VI.3 based library results were in better agreement with measurements. There is a maximum difference of 7% (for the 63Cu(n,α)60Co reaction rate calculation) between ENDF/B-VI.3 and ENDF/B-VII.O. Differences between ENDF/B-VI.3 and ENDF/B-VII.O libraries are due to 16O, 1H, 90Zr, 91Zr, 92Zr, 238U, and 239Pu evaluations. Both ENDF/B-VI.3 and ENDF/B-VII.O library calculated reaction rates are within 20% of measurement and meet the criterion specified in the U. S. Nuclear Regulatory Commission Regulatory Guide 1.190, "Calculational and Dosimetry Methods for Determining Pressure Vessel Neutron Fluence."

  7. New generation ion-imprinted nanocarrier for removal of Cr(VI) from wastewater

    NASA Astrophysics Data System (ADS)

    Uygun, Murat; Feyzioğlu, Esra; Özçalışkan, Emir; Caka, Müşerref; Ergen, Aygen; Akgöl, Sinan; Denizli, Adil

    2013-08-01

    The purpose of this study was to prepare a novel ion-imprinted nanoparticle to remove Cr(VI) ions from waste water. For this, Cr(VI) ions were complexed with 2-methacryloylamido histidine (MAH) and then Cr(VI)-imprinted poly(HEMAH) nanoparticles were synthesized by surfactant-free emulsion polymerization technique. The templates, Cr(VI) ions, were removed from the nanoparticles using 0.1 M of HNO3 solution. The specific surface area of the Cr(VI)-imprinted poly(HEMAH) nanoparticles was found to be 1,397.85 m2/g, and the particle size was calculated as 155.3 nm. These Cr(VI)-imprinted nanoparticles were used for the adsorption/desorption of Cr(VI) ions from its aqueous solutions. The effects of initial Cr(VI) concentration and medium pH on the Cr(VI) adsorption capacity were also studied. The maximum adsorbed amount of Cr(VI) on the imprinted nanoparticles was found to be 3,830.58 mg/g nanoparticle in pH 4.0. In order to investigate the selectivity of the imprinted nanoparticle, adsorption studies were repeated using Cr(III) ions. The selectivity results demonstrated that Cr(VI)-imprinted poly(HEMAH) nanoparticles showed high affinity for the Cr(VI) ions than Cr(III). The Cr(VI)-imprinted nanoparticles were used several times without decreasing their Cr(VI) adsorption capacities.

  8. 31 CFR Appendix A to Subpart C of... - Examples

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Examples A Appendix A to Subpart C of... A to Subpart C of Part 29—Examples This appendix contains sample calculations of Federal Benefit Payments in a variety of situations. Optional Retirement Examples Example 1: No Unused Sick Leave A. In...

  9. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... monitor. 3.3.4.4Pb Performance Evaluation Program (PEP) Procedures. Each year, one performance evaluation... Information 2. Quality System Requirements 3. Measurement Quality Check Requirements 4. Calculations for Data... 10 of this appendix) and at a national level in references 1, 2, and 3 of this appendix. 1...

  10. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... monitor. 3.3.4.4Pb Performance Evaluation Program (PEP) Procedures. Each year, one performance evaluation... Information 2. Quality System Requirements 3. Measurement Quality Check Requirements 4. Calculations for Data... 10 of this appendix) and at a national level in references 1, 2, and 3 of this appendix. 1...

  11. Methods for determining soluble and insoluble Cr III and Cr VI compounds in welding fumes.

    PubMed

    Matczak, W; Chmielnicka, J

    1989-01-01

    An analytical procedure for simultaneous determination of soluble and insoluble Cr III and Cr VI compounds in welding fumes has been proposed. In the welding fume samples collected on a membrane filter, total chromium was determined with atomic absorption spectrophotometry (AAS). Glass filters with collected samples were divided into two parts. In one part of the sample, soluble and insoluble chromium was determined by means of AAS. The separation of soluble chromium III and VI was carried out on diphenylcarbazide resin. In the second part of the sample total chromium VI was determined by means of the colorimetric method with s-diphenylcarbazide. The difference in the results of these determinations allowed the calculation of the content of total Cr III, Cr III insolub. and Cr VI insolub. The results of determining chromium compounds in welding fumes samples collected in the welder's breathing zone and in experimental chambers are also presented in this paper. The content of total chromium in the fumes determined by AAS (from a membrane filtr) and that calculated from the sum of soluble and insoluble chromium (from a glass filter) were concordant and within the limits of the admissible error for the method. Total chromium content in welding fume samples collected individually was found to range from 2.4-4.2%. The percentage of particular chromium compounds as compared to total chromium (100%) amounted: total Cr III--34%, total Cr VI--66%, soluble chromium--66% and in this Cr III--20% and Cr VI--43%, insoluble chromium--34% and in this: Cr III--14% and Cr VI--20%.

  12. On the Stark broadening of Cr VI spectral lines in astrophysical plasma

    NASA Astrophysics Data System (ADS)

    Dimitrijević, M. S.; Simić, Z.; Sahal-Bréchot, S.

    2017-02-01

    Stark broadening parameters for Cr VI lines have been calculated using semiclassical perturbation method for conditions of interest for stellar plasma. Here are presented, as an example of obtained results, Stark broadening parameters for electron- and proton-impact broadening for Cr VI 4s 2S-4p 2P° λ = 1430 Å and Cr VI 4p 2P°-5s 2S λ = 611.8 Å multiplets. The obtained results are used to demonstrate the importance of Stark broadening of Cr VI in DO white dwarf atmospheres. Also the obtained results will enter in STARK-B database which is included in Virtual Atomic and Molecula Data Center - VAMDC.

  13. Zn-VI quasiparticle gaps and optical spectra from many-body calculations.

    PubMed

    Riefer, A; Weber, N; Mund, J; Yakovlev, D R; Bayer, M; Schindlmayr, Arno; Meier, C; Schmidt, W G

    2017-06-01

    The electronic band structures of hexagonal ZnO and cubic ZnS, ZnSe, and ZnTe compounds are determined within hybrid-density-functional theory and quasiparticle calculations. It is found that the band-edge energies calculated on the [Formula: see text] (Zn chalcogenides) or GW (ZnO) level of theory agree well with experiment, while fully self-consistent QSGW calculations are required for the correct description of the Zn 3d bands. The quasiparticle band structures are used to calculate the linear response and second-harmonic-generation (SHG) spectra of the Zn-VI compounds. Excitonic effects in the optical absorption are accounted for within the Bethe-Salpeter approach. The calculated spectra are discussed in the context of previous experimental data and present SHG measurements for ZnO.

  14. A Structural Weight Estimation Program (SWEEP) for Aircraft. Volume VI - Wing and Empennage Module. Appendix E: Program Listings, Overlays (8,0), (14, 0), (15,0), (16,0), and (17,0)

    DTIC Science & Technology

    1974-06-01

    TCUTII70 00 1» ■•I.11 TtMTIlM lltOil-»! • MILK .1󈨋 TtUTIlM ir ii - WISH i».IM.i;i nuiino IK l • H . 1 TWTltlt ITCOIKIll • OAlLKIll... rvf I161- nriiTi- nrm» tvrut» tvri»7i- Tvriaai nriTii tvriw nrisji- rvrivii- rvriHSi- rvrisei- . vro vro ttu »rsoi mi 001 I«p

  15. 15 CFR Appendix Vi to Subpart P of... - Special-Use Areas Boundary Coordinates and Use Designations

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...)—[Based on differential Global Positioning Systems data] Point Latitude Longitude 1 24 deg.56.83′ N 80 deg.27.26′ W. 2 24 deg.57.10′ N 80 deg.26.93′ W. 3 24 deg.56.99′ N 80 deg.27.42′ W. 4 24 deg.57.34′ N 80 deg.27.26′ W. 5 24 deg.56.83′ N 80 deg.27.26′ W. Eastern Sambo (Research Only)—[Based on differential...

  16. Official Guard and Reserve Manpower Strengths and Statistics. FY 2005 Summary

    DTIC Science & Technology

    2005-01-01

    Comments concerned with policy issues of use of these reports for Reserve Component studies should be addressed to the Office of the Assistant...r~ln^ooN^co^J^OHlrlH(\\l(^loo^(Ti^oDHoo’TVlO^^^^(D^^^^o^^ ininoohViOraimooiniohcoHCN^^ CNCD ^inin’ririinin^^HOH^’a’tNinooo^u) r^r^oocxsi^vD^ixi...Ld H S s o EH EH H APPENDIX A DISTRIBUTION AGENCIES COPIES DEPARTMENT OF DEFENSE OSD (MM&PP) (AP) 1 OASD (RA) RESERVE FORCES POLICY BOARD 5

  17. Two New Plant-Like Pathways Link Hemoglobin Degradation to Lipid Biogenesis in Falciparum Malaria: Novel Targets for Anti-Malarial Chemotherapy

    DTIC Science & Technology

    2005-03-01

    when the compound was added at 50/uM (Appendix VI, B). Furthermore, clofibric acid , an inhibitor of PtdEtn methylransferases (19), had no effect on Pfpmt...reduced when the compound was added at 50 AM (Fig. 5B). Furthermore, clofibric acid , an inhibitor of PtdEtn B 35 methyltransferases (34), had no...Fig. 5B). Furthermore, clofibric acid , an takDs .Shnmn .Jnsn .Coday n .U~a o inhibitor of PtdEtn methyltransferases, had no effect on Pfpmt helpful

  18. Engineering and Environmental Study of DDT Contamination of Huntsville Spring Branch, Indian Creek, and Adjacent Lands and Waters, Wheeler Reservoir, Alabama. Volume 2. Appendices I-III.

    DTIC Science & Technology

    1980-11-01

    other shrubs and trees may be common or even dense. These include sweetqum, smooth sumac, and vines . The latter younger forests provide moderate...species of trees, (Appendix VI). They are dominated by green ash, red maple, blue beech, American elm and hackberry. Ground and shrub cover is sparse, and...Hrwo wm largest circumference at breast height being measured at 96.5 inches. Shrubs consist of occasional buttonbush and swamip rose (Rosa

  19. The Dirigible: A Catalyst for Resource Exploitation in Remote Areas?

    DTIC Science & Technology

    1985-04-01

    ir’ship (26’.: 13). .. Hybrid . A he ,vi er than air vehiLile which Lomb nes.’-. s.tar~ it (gas) anrid cly ,mi L (pro~pel 1er s, jet e, g ines ) li ft...another test with a hybrid airship (8:.33). TABLE 1. - Airships Rejected p The three remaining airships will be discussed next. All arc? hybrid LTAs...heavy-lift markets. (Drawing at Appendix 3.) The Cyclo-Crane is a hybrid aircraft utilizing aerostatic lift from a helium filled centerbody to support

  20. The NICROSIL versus NISIL Type N Thermocouple: A Commercial Reality,

    DTIC Science & Technology

    1983-10-01

    2. foda where Ae, the component of the total thermal emf e, due to inhomogeneity, Ae = e - eO , where e0 is the ’ideal’ emf, S a is the ’ideal’ Seebeck...are moderately stable and not greatly elevated. Appendix VI presents an analysis of the estimated errors that are to be expected when nicrosil versus...section 5.4.1, page 23, para. 1. Title: ANALYSIS OF ERRORS INTRODUCED BY THE USE OF CONVENTIONAL (ANSI TYPES J, K, R, S, or T) LEADWIRES WITH

  1. Stellar laboratories: new Ge V and Ge VI oscillator strengths and their validation in the hot white dwarf RE 0503-289

    NASA Astrophysics Data System (ADS)

    Rauch, T.; Werner, K.; Biémont, É.; Quinet, P.; Kruk, J. W.

    2012-10-01

    Context. State-of-the-art spectral analysis of hot stars by means of non-LTE model-atmosphere techniques has arrived at a high level of sophistication. The analysis of high-resolution and high-S/N spectra, however, is strongly restricted by the lack of reliable atomic data for highly ionized species from intermediate-mass metals to trans-iron elements. Especially data for the latter has only been sparsely calculated. Many of their lines are identified in spectra of extremely hot, hydrogen-deficient post-AGB stars. A reliable determination of their abundances establishes crucial constraints for AGB nucleosynthesis simulations and, thus, for stellar evolutionary theory. Aims: In a previous analysis of the UV spectrum of RE 0503-289, spectral lines of highly ionized Ga, Ge, As, Se, Kr, Mo, Sn, Te, I, and Xe were identified. Individual abundance determinations are hampered by the lack of reliable oscillator strengths. Most of these identified lines stem from Ge V. In addition, we identified Ge VI lines for the first time. We calculated Ge V and Ge VI oscillator strengths in order to reproduce the observed spectrum. Methods: We newly calculated Ge V and Ge VI oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our non-LTE stellar-atmosphere models for the analysis of the Ge iv-vi spectrum exhibited in high-resolution and high-S/N FUV (FUSE) and UV (ORFEUS/BEFS, IUE) observations of RE 0503-289. Results: In the UV spectrum of RE 0503-289, we identify four Ge IV, 37 Ge V, and seven Ge VI lines. Most of these lines are identified for the first time in any star. We can reproduce almost all Ge IV, Ge V, and Ge VI lines in the observed spectrum of RE 0503-289 (Teff = 70 kK, log g = 7.5) at log Ge = -3.8 ± 0.3 (mass fraction, about 650 times solar). The Ge iv/v/vi ionization equilibrium, that is a very sensitive Teff indicator, is reproduced well. Conclusions: Reliable measurements and calculations of atomic data are a prerequisite for stellar-atmosphere modeling. Our oscillator-strength calculations have allowed, for the first time, Ge V and Ge VI lines to be successfully reproduced in a white dwarf's (RE 0503-289) spectrum and to determine its photospheric Ge abundance. Based on observations made with the NASA-CNES-CSA Far Ultraviolet Spectroscopic Explorer.Figures 4-6 and Tables 1, 3 are available in electronic form at http://www.aanda.orgTables 2 and 4 are only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/546/A55

  2. Tumoral Venous Invasion after Distal Pancreatectomy: A Risk Factor for Recurrence.

    PubMed

    Joliat, Gaëtan-Romain; Petermann, David; Demartines, Nicolas; Halkic, Nermin; Schäfer, Markus

    2018-05-31

    Few data exist on postoperative outcomes of patients with pancreatic body-tail malignancies and tumoral venous invasion (VI). This study aimed at comparing survival and recurrence rate (RR) after distal pancreatectomy for adenocarcinoma in patients with and without tumoral VI. All consecutive distal pancreatectomies (2000-2015) were collected. Demographics and peri- and postoperative data were recorded. Survivals were calculated using Kaplan-Meier curves. A total of 45 patients underwent distal pancreatectomies for malignancies, of which 33 patients had ductal adenocarcinomas and 2 had cystadenocarcinomas. Among these 35 adenocarcinomas, histological VI was found in 28 patients (80%). Characteristics and intraoperative data of patients with and without VI were similar. Complication rates were 15 of 28 (54%) in the VI group and 3 of 7 (43%) in the group without VI (p = 0.612). Five-year survival for the group with and without VI were 19 and 39% (p = 0.232), respectively. RR was 16 of 28 (57%) for the VI group and 1 of 7 (14%) for the group without VI (p = 0.042). VI did not have an effect on postoperative -complications. Survivals were similar in case of VI or not. On the contrary, RR was higher in the VI group. © 2018 S. Karger AG, Basel.

  3. 12 CFR Appendix F to Part 208 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... that the risk-weighted asset amount calculated under this appendix by the bank for one or more... this appendix to one or more exposures, provided that: (1) The bank can demonstrate on an ongoing basis...

  4. 12 CFR Appendix F to Part 208 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... that the risk-weighted asset amount calculated under this appendix by the bank for one or more... this appendix to one or more exposures, provided that: (1) The bank can demonstrate on an ongoing basis...

  5. 12 CFR Appendix D to Part 325 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... determines that the risk-weighted asset amount calculated under this appendix by the bank for one or more... a provision of this appendix to one or more exposures, provided that: (1) The bank can demonstrate...

  6. 12 CFR Appendix F to Part 208 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... that the risk-weighted asset amount calculated under this appendix by the bank for one or more... this appendix to one or more exposures, provided that: (1) The bank can demonstrate on an ongoing basis...

  7. 12 CFR Appendix C to Part 3 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... asset amount calculated under this appendix by the bank for one or more exposures is not commensurate... this appendix to one or more exposures, provided that: (1) The bank can demonstrate on an ongoing basis...

  8. 12 CFR Appendix F to Part 208 - Capital Adequacy Guidelines for Banks: Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... that the risk-weighted asset amount calculated under this appendix by the bank for one or more... this appendix to one or more exposures, provided that: (1) The bank can demonstrate on an ongoing basis...

  9. Kinetics and Mechanism of the Reaction of a Ruthenium(VI) Nitrido Complex with HSO3 (-) and SO3 (2-) in Aqueous Solution.

    PubMed

    Wang, Qian; Zhao, Hong Yan; Man, Wai-Lun; Lam, William W Y; Lau, Kai-Chung; Lau, Tai-Chu

    2016-07-25

    The kinetics and mechanism of the reaction of S(IV) (SO3 (2-) +HSO3 (-) ) with a ruthenium(VI) nitrido complex, [(L)Ru(VI) (N)(OH2 )](+) (Ru(VI) N, L=N,N'-bis(salicylidene)-o-cyclohexyldiamine dianion), in aqueous acidic solutions are reported. The kinetic results are consistent with parallel pathways involving oxidation of HSO3 (-) and SO3 (2-) by Ru(VI) N. A deuterium isotope effect of 4.7 is observed in the HSO3 (-) pathway. Based on experimental results and DFT calculations the proposed mechanism involves concerted N-S bond formation (partial N-atom transfer) between Ru(VI) N and HSO3 (-) and H(+) transfer from HSO3 (-) to a H2 O molecule. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Sorption characteristic of uranium(VI) ion onto K-feldspar.

    PubMed

    Gao, Xiaoqing; Bi, Mingliang; Shi, Keliang; Chai, Zhifang; Wu, Wangsuo

    2017-10-01

    The effect of pH, contact time, temperature, ionic strength and initial U(VI) concentration on U(VI) sorption onto K-feldspar was investigated using batch techniques. The sorption kinetics was evaluated and the activation energy was obtained based on the rate constants at different temperature. Graphical correlations of sorption isotherm models have been evaluated and applied for U(VI) uptake by K-feldspar. Various thermodynamic parameters, such as, Gibb's free energy, entropy and enthalpy of the on-going sorption process have been calculated and the possible sorption mechanism of U(VI) was deduced. The results are expected to help better understand the migration of uranium in the host materials of granite. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Color Doppler quantitative measures to predict outcome of biopsies in prostate cancer

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Strigari, Lidia; Marsella, Annelisa; Canitano, Stefano

    2008-11-15

    Purpose: The aim was to correlate the color Doppler flow activity pre- and postradiotherapy, using transrectal color Doppler ultrasonography (CDUS) and the 2 year positive biopsy rate after radiotherapy in patients with prostate cancer. Methods and materials: Analysis was carried out in 69 out of 160 patients who had undergone treatment with 3D-conformal radiotherapy (3D-CRT) to prostate and seminal vesicles. Patients were randomized to receive 80 Gy in 40 fractions in 8 weeks (arm A) and 62 Gy in 20 fractions in 5 weeks, 4 fractions per week (arm B). Color Doppler flow activity (CDFA) was evaluated calculating the vascularizationmore » index (VI), defined as the ratio between the colored and total pixels in the whole and peripheral prostate, delineated by a radiation oncologist on CDUS images, using EcoVasc a home-made software. The difference between the 2 year post- and pre-3D-CRT maximum VI (VI{sub max}), named {Delta}VI{sub max}, was calculated in the whole and peripheral prostate for each patient. Then, {Delta}VI{sub max} and the detected 2 year biopsy outcome were analyzed using the receiver operating characteristics (ROC) technique. Results: The VI{sub max} increased or decreased in patients with positive or negative biopsies, respectively, compared to the value before RT in both arms. The area under the ROC curve for {Delta}VI{sub max} in the whole and peripheral prostate is equal to 0.790 and 0.884, respectively. Conclusion: The {Delta}VI{sub max} index, comparing CDFA at 2 years compared to that before RT, allows the 2 year postradiotherapy positive biopsy rate to be predicted.« less

  12. 49 CFR Appendix A to Part 531 - Example of Calculating Compliance Under § 531.5(c)

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE... automobiles in MY 2012 as follows: Appendix A, Table 1 Model type Group Carline name Basic engine(L...

  13. 49 CFR Appendix A to Part 531 - Example of Calculating Compliance Under § 531.5(c)

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE... automobiles in MY 2012 as follows: Appendix A, Table 1 Model type Group Carline name Basic engine(L...

  14. Novel method of vulnerability assessment of simple landfills area using the multimedia, multipathway and multireceptor risk assessment (3MRA) model, China.

    PubMed

    Yuan, Ying; He, Xiao-Song; Xi, Bei-Dou; Wei, Zi-Min; Tan, Wen-Bing; Gao, Ru-Tai

    2016-11-01

    Vulnerability assessment of simple landfills was conducted using the multimedia, multipathway and multireceptor risk assessment (3MRA) model for the first time in China. The minimum safe threshold of six contaminants (benzene, arsenic (As), cadmium (Cd), hexavalent chromium [Cr(VI)], divalent mercury [Hg(II)] and divalent nickel [Ni(II)]) in landfill and waste pile models were calculated by the 3MRA model. Furthermore, the vulnerability indexes of the six contaminants were predicted based on the model calculation. The results showed that the order of health risk vulnerability index was As > Hg(II) > Cr(VI) > benzene > Cd > Ni(II) in the landfill model, whereas the ecology risk vulnerability index was in the order of As > Hg(II) > Cr(VI) > Cd > benzene > Ni(II). In the waste pile model, the order of health risk vulnerability index was benzene > Hg(II) > Cr(VI) > As > Cd and Ni(II), whereas the ecology risk vulnerability index was in the order of Hg(II) > Cd > Cr(VI) > As > benzene > Ni(II). These results indicated that As, Hg(II) and Cr(VI) were the high risk contaminants for the case of a simple landfill in China; the concentration of these in soil and groundwater around the simple landfill should be strictly monitored, and proper mediation is also recommended for simple landfills with a high concentration of contaminants. © The Author(s) 2016.

  15. 12 CFR Appendix G to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Internal-Ratings-Based and Advanced...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... calculated under this appendix by the bank holding company for one or more exposures is not commensurate with... company may choose not to apply a provision of this appendix to one or more exposures, provided that: (1...

  16. 12 CFR Appendix G to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Internal-Ratings-Based and Advanced...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... calculated under this appendix by the bank holding company for one or more exposures is not commensurate with... company may choose not to apply a provision of this appendix to one or more exposures, provided that: (1...

  17. 12 CFR Appendix G to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Internal-Ratings-Based and Advanced...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... Excluded mortgage exposure means any one- to four-family residential pre-sold construction loan for a... calculated under this appendix by the bank holding company for one or more exposures is not commensurate with... company may choose not to apply a provision of this appendix to one or more exposures, provided that: (1...

  18. Tolerance and bioaccumulation of U(VI) by Bacillus mojavensis and its solid phase preconcentration by Bacillus mojavensis immobilized multiwalled carbon nanotube.

    PubMed

    Özdemir, Sadin; Oduncu, M Kadir; Kilinc, Ersin; Soylak, Mustafa

    2017-02-01

    In this study, uranium(VI) tolerance and bioaccumulation were investigated by using thermo -tolerant Bacillus mojavensis. The level of U(VI) was measured by UV-VIS spectrophotometry. The minimum inhibition concentration (MIC) value of U(VI) was experimented. Bacterial growth was not affected in the presence of 1.0 and 2.5 mg/L U(VI) at 36 h and the growth was partially affected in the presence of 5 mg/L U(VI) at 24 h. What was obtained from this study is that there was diversity in the various periods of the growth phases of metal bioaccumulation capacity, which was shown by B. mojavensis. The maximum bioaccumulation capacities were found to be 12.8, 22.7, and 48.2 mg/g dried bacteria, at 24th hours at concentration of 1.0, 2.5 and 5 mg/L U(VI), respectively. In addition to these, U(VI) has been preconcentrated on B. mojavensis immobilized MWCNT. Several factors such as pH, flow rate of solution, amount of biosorbent and support materials, eluent type, concentration and volume, the matrix interference effect on retention have been studied, and extraction conditions were optimized. Preconcentration factor was achieved as 60. Under the optimized conditions, the limit of detection (LOD) and quantification (LOQ) were calculated as 0.74 and 2.47 μg/L. The biosorption capacity of immobilized B. mojavensis was calculated for U(VI) as 25.8 mg/g. The results demonstrated that the immobilized biosorbent column could be reused at least 30 cycles of biosorption and desorption with the higher than 95% recovery. FT-IR and SEM analysis were performed to understand the surface properties of B. mojavensis. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Bibliography of Soviet Laser Developments, Number 41, May - June 1979.

    DTIC Science & Technology

    1980-01-10

    Andreyeva, O.V., and V.I. Sukhanov (0). Method for calculating the diffraction efficiency of holograms, allowing for the granularity of the photolayer. Sb...thick-layer holograms. Sb 14, 128-133. 315. Sukhanov , V.I., G.I. Lashkov, A.Ye. Petnikov, Yu.V. Ashcheulov, I.I. Reznikova, and A.S. Cherkasov (0... Sukhanov , V.I., Yu.V. Ashcheulov, and A.Ye. Petnikov (0). Recording and readout of holograms in LiNbO :Fe crystals. Sb 14, 64-72. 317. Tanin, L.V. (0

  20. EFFECTS OF LASER RADIATION ON MATTER: Calculation of the gain of a C VI laser plasma expanding as a cylinder and a cylindrical layer

    NASA Astrophysics Data System (ADS)

    Gulov, A. V.; Derzhiev, V. I.; Zhidkov, A. G.; Pritula, A. G.; Chekmezov, A. N.; Yakovlenko, Sergei I.

    1990-08-01

    Calculations are reported of the gain due to the 3-2 transition in the C VI ion in an expanding plasma cylinder or a cylindrical layer. Under the conditions in the experiments at the Rutherford Appleton Laboratory (Chilton, England) amplification was observed as a result of evaporation of a fairly thin (~ 0.1 μm) cylindrical layer. A peak of the gain was reached in a relatively short time (~ 0.1 ns).

  1. 15 CFR Appendix F to Subpart M of... - Davidson Seamount Management Zone

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Trade (Continued) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE OCEAN AND COASTAL RESOURCE MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine... [Coordinates in this appendix are unprojected (Geographic Coordinate System) and are calculated using the North...

  2. 15 CFR Appendix F to Subpart M of... - Davidson Seamount Management Zone

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Trade (Continued) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE OCEAN AND COASTAL RESOURCE MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine... [Coordinates in this appendix are unprojected (Geographic Coordinate System) and are calculated using the North...

  3. 15 CFR Appendix F to Subpart M of... - Davidson Seamount Management Zone

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Trade (Continued) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE OCEAN AND COASTAL RESOURCE MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Monterey Bay National Marine... [Coordinates in this appendix are unprojected (Geographic Coordinate System) and are calculated using the North...

  4. Theory and application of drilling fluid hydraulics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Whittaker, A.

    1985-01-01

    The objectives of this book are (1) to serve as a reasonably comprehensive text on the subject of drilling hydraulics and (2) to provide the field geologist with a quick reference to drilling hydraulics calculations. Chapter 1 introduces the basic principles of fluid properties, and Chapter 2 presents the general principles of fluid hydraulics. Chapters 3 through 10 analyze specific hydraulic considerations of the drilling process, such as viscometric measurements, pressure losses, swab and surge pressures, cuttings transport and hydraulic optimization. The units and nomenclature are consistent throughout the manual. Equations are given generally in consistent S.I. units; some commonmore » expressions are also given in oilfield units. Nomenclature is explained after every equation when necessary, and a comprehensive list of the nomenclature used is given in Appendix A. Units are listed in Appendix B. In Appendix C, all the important equations are given in both S.I. and oilfield units. Appendix D contains example hydraulics calculations.« less

  5. HNO3 modified biochars for uranium (VI) removal from aqueous solution.

    PubMed

    Jin, Jie; Li, Shiwei; Peng, Xianqiang; Liu, Wei; Zhang, Chenlu; Yang, Yan; Han, Lanfang; Du, Ziwen; Sun, Ke; Wang, Xiangke

    2018-05-01

    The HNO 3 treatment was used to chemically modify the biochars produced from wheat straw (WH) and cow manure for U(VI) removal from aqueous solution. Macroscopic experiments proved that the enrichment of U(VI) on the biochars was regulated by surface complexation and electrostatic interactions. FTIR and XPS analyses confirmed that the highly efficient adsorption of U(VI) was due to the carboxyl groups on the biochar surfaces. The reducing agents of the R-CH 2 OH groups facilitated U(VI) adsorption on the untreated biochars. Owing to the higher contents of surface COO groups and more negative surface charge, the modified biochars showed enhanced U(VI) adsorption ability than the untreated ones. The maximum adsorption capacity of U(VI) by the oxidized WH was calculated to be 355.6 mg/g at pH 4.5 and 298 K, which was an improvement of 40 times relative to the untreated WH and was higher than that of most carbon-based adsorbents. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Trigonal Cu2-II-Sn-VI4 (II = Ba, Sr and VI = S, Se) quaternary compounds for earth-abundant photovoltaics.

    PubMed

    Hong, Feng; Lin, Wenjun; Meng, Weiwei; Yan, Yanfa

    2016-02-14

    We propose trigonal Cu2-II-Sn-VI4 (II = Ba, Sr and VI = S, Se) quaternary compounds for earth-abundant solar cell applications. Through density functional theory calculations, we show that these compounds exhibit similar electronic and optical properties to kesterite Cu2ZnSnS4 (CZTS): high optical absorption with band gaps suitable for efficient single-junction solar cell applications. However, the trigonal Cu2-II-Sn-VI4 compounds exhibit defect properties more suitable for photovoltaic applications than those of CZTS. In CZTS, the dominant defects are the deep acceptors, Cu substitutions on Zn sites, which cause non-radiative recombination and limit the open-circuit voltages of CZTS solar cells. On the contrary, the dominant defects in trigonal Cu2-II-Sn-VI4 are the shallow acceptors, Cu vacancies, similar to those in CuInSe2. Our results suggest that the trigonal Cu2-II-Sn-VI4 quaternary compounds could be promising candidates for efficient earth-abundant thin-film solar cell and photoeletrochemical water-splitting applications.

  7. T1 bright appendix sign to exclude acute appendicitis in pregnant women.

    PubMed

    Shin, Ilah; An, Chansik; Lim, Joon Seok; Kim, Myeong-Jin; Chung, Yong Eun

    2017-08-01

    To evaluate the diagnostic value of the T1 bright appendix sign for the diagnosis of acute appendicitis in pregnant women. This retrospective study included 125 pregnant women with suspected appendicitis who underwent magnetic resonance (MR) imaging. The T1 bright appendix sign was defined as a high intensity signal filling more than half length of the appendix on T1-weighted imaging. Sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of the T1 bright appendix sign for normal appendix identification were calculated in all patients and in those with borderline-sized appendices (6-7 mm). The T1 bright appendix sign was seen in 51% of patients with normal appendices, but only in 4.5% of patients with acute appendicitis. The overall sensitivity, specificity, PPV, and NPV of the T1 bright appendix sign for normal appendix diagnosis were 44.9%, 95.5%, 97.6%, and 30.0%, respectively. All four patients with borderline sized appendix with appendicitis showed negative T1 bright appendix sign. The T1 bright appendix sign is a specific finding for the diagnosis of a normal appendix in pregnant women with suspected acute appendicitis. • Magnetic resonance imaging is increasingly used in emergency settings. • Acute appendicitis is the most common cause of acute abdomen. • Magnetic resonance imaging is widely used in pregnant population. • T1 bright appendix sign can be a specific sign representing normal appendix.

  8. The New Class of Layered Iii-Vi Diluted Magnetic Semiconductors and Their Magnetic MEASUREMENTS*

    NASA Astrophysics Data System (ADS)

    Pekarek, T. M.; Maymi, C.; Watson, E.; Fuller, C. L.; Garner, J. L.; Crooker, B. C.; Miotkowski, I.; Ramdas, A. K.

    2002-03-01

    A new class of diluted magnetic semiconductors (DMS) based on III-VI semiconductor hosts has been studied. To date three III-VI DMS systems have been investigated (Ga1-xMnxS, Ga1-xMnxSe, and Ga1-xFexSe). Magnetization measurements on all three systems will be presented. Recent theoretical calculations (based on a Hamiltonian including crystal-field, spin-orbit, spin-spin, and Zeeman terms) have been made for Ga1-xMnxS showing excellent agreement with the experimental data. This establishes Ga1-xMnxS as the first III-VI DMS to be understood both experimentally and theoretically. This new class of III-VI DMS complements the more extensive work on II-VI DMS and III-V DMS. *Support: Research Corporation Cottrell College Science Awards CC4719, CC4845, and CC4668, FL Space Grant Consortium, NHMFL, Purdue Academic Reimbursement Grant, and NSF No. DMR-99-72196, DMR-99-75887, DMR-01-02699, and ECS-01-29853.

  9. Size Distribution and Estimated Respiratory Deposition of Total Chromium, Hexavalent Chromium, Manganese, and Nickel in Gas Metal Arc Welding Fume Aerosols

    PubMed Central

    Cena, Lorenzo G.; Chisholm, William P.; Keane, Michael J.; Cumpston, Amy; Chen, Bean T.

    2016-01-01

    A laboratory study was conducted to determine the mass of total Cr, Cr(VI), Mn, and Ni in 15 size fractions for mild and stainless steel gas-metal arc welding (GMAW) fumes. Samples were collected using a nano multi orifice uniform deposition impactor (MOUDI) with polyvinyl chloride filters on each stage. The filters were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and ion chromatography. Limits of detection (LODs) and quantitation (LOQs) were experimentally calculated and percent recoveries were measured from spiked metals in solution and dry, certified welding-fume reference material. The fraction of Cr(VI) in total Cr was estimated by calculating the ratio of Cr(VI) to total Cr mass for each particle size range. Expected, regional deposition of each metal was estimated according to respiratory-deposition models. The weight percent (standard deviation) of Mn in mild steel fumes was 9.2% (6.8%). For stainless steel fumes, the weight percentages were 8.4% (5.4%) for total Cr, 12.2% (6.5%) for Mn, 2.1% (1.5%) for Ni and 0.5% (0.4%) for Cr(VI). All metals presented a fraction between 0.04 and 0.6 μm. Total Cr and Ni presented an additional fraction <0.03 μm. On average 6% of the Cr was found in the Cr(VI) valence state. There was no statistical difference between the smallest and largest mean Cr(VI) to total Cr mass ratio (p-value D 0.19), hence our analysis does not show that particle size affects the contribution of Cr(VI) to total Cr. The predicted total respiratory deposition for the metal particles was ∼25%. The sites of principal deposition were the head airways (7–10%) and the alveolar region (11–14%). Estimated Cr(VI) deposition was highest in the alveolar region (14%). PMID:26848207

  10. Size Distribution and Estimated Respiratory Deposition of Total Chromium, Hexavalent Chromium, Manganese, and Nickel in Gas Metal Arc Welding Fume Aerosols.

    PubMed

    Cena, Lorenzo G; Chisholm, William P; Keane, Michael J; Cumpston, Amy; Chen, Bean T

    A laboratory study was conducted to determine the mass of total Cr, Cr(VI), Mn, and Ni in 15 size fractions for mild and stainless steel gas-metal arc welding (GMAW) fumes. Samples were collected using a nano multi orifice uniform deposition impactor (MOUDI) with polyvinyl chloride filters on each stage. The filters were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and ion chromatography. Limits of detection (LODs) and quantitation (LOQs) were experimentally calculated and percent recoveries were measured from spiked metals in solution and dry, certified welding-fume reference material. The fraction of Cr(VI) in total Cr was estimated by calculating the ratio of Cr(VI) to total Cr mass for each particle size range. Expected, regional deposition of each metal was estimated according to respiratory-deposition models. The weight percent (standard deviation) of Mn in mild steel fumes was 9.2% (6.8%). For stainless steel fumes, the weight percentages were 8.4% (5.4%) for total Cr, 12.2% (6.5%) for Mn, 2.1% (1.5%) for Ni and 0.5% (0.4%) for Cr(VI). All metals presented a fraction between 0.04 and 0.6 μ m. Total Cr and Ni presented an additional fraction <0.03 μ m. On average 6% of the Cr was found in the Cr(VI) valence state. There was no statistical difference between the smallest and largest mean Cr(VI) to total Cr mass ratio ( p -value D 0.19), hence our analysis does not show that particle size affects the contribution of Cr(VI) to total Cr. The predicted total respiratory deposition for the metal particles was ∼25%. The sites of principal deposition were the head airways (7-10%) and the alveolar region (11-14%). Estimated Cr(VI) deposition was highest in the alveolar region (14%).

  11. 40 CFR Appendix L to Part 50 - Reference Method for the Determination of Fine Particulate Matter as PM2.5 in the Atmosphere

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... sample period. Accordingly, if the value thus calculated is high enough to be an exceedance, such an... Provided by the Sampler Information to be provided Appendix L sectionreference Availability Anytime 1 End...

  12. Conversion and improvement of the Rutherford Laboratory's magnetostatic computer code GFUN3D to the NMFECC CDC 7600

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tucker, T.C.

    1980-06-01

    The implementation of a version of the Rutherford Laboratory's magnetostatic computer code GFUN3D on the CDC 7600 at the National Magnetic Fusion Energy Computer Center is reported. A new iteration technique that greatly increases the probability of convergence and reduces computation time by about 30% for calculations with nonlinear, ferromagnetic materials is included. The use of GFUN3D on the NMFE network is discussed, and suggestions for future work are presented. Appendix A consists of revisions to the GFUN3D User Guide (published by Rutherford Laboratory( that are necessary to use this version. Appendix B contains input and output for some samplemore » calculations. Appendix C is a detailed discussion of the old and new iteration techniques.« less

  13. 49 CFR Appendix A to Part 533 - Example of Calculating Compliance Under § 533.5 Paragraph (g)

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... comply with the CAFE standard for MY 2012 as set forth in section 533.5(i). ER06AP06.041 Note to Appendix... to its required fuel economy level of 23.1 mpg, Manufacturer X complies with the Reformed CAFE...

  14. 49 CFR Appendix A to Part 533 - Example of Calculating Compliance Under § 533.5 Paragraph (g)

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... comply with the CAFE standard for MY 2012 as set forth in section 533.5(i). ER06AP06.041 Note to Appendix... to its required fuel economy level of 23.1 mpg, Manufacturer X complies with the Reformed CAFE...

  15. Contemporaneous Ultraviolet and Optical Observations of Direct and Raman-scattered O VI Lines in Symbiotic Stars

    NASA Astrophysics Data System (ADS)

    Birriel, Jennifer J.; Espey, Brian R.; Schulte-Ladbeck, Regina E.

    2000-12-01

    Symbiotic stars are binary systems consisting of a hot star, typically a white dwarf, and a cool giant companion. The wind from the cool star is ionized by the radiation from the hot star, resulting in the characteristic combination of sharp nebular emission lines and stellar molecular absorption bands in the optical spectrum. Most of the emission lines are readily identifiable with common ions. However, two strong, broad emission lines at 6825 and 7082 Å defied identification with known atoms and ions. In 1989 Schmid made the case that these long unidentified emission lines resulted from the Raman scattering of the O VI resonance photons at 1032, 1038 Å by neutral hydrogen. We present contemporaneous far-UV and optical observations of direct and Raman-scattered O VI lines for nine symbiotic stars obtained with the Hopkins Ultraviolet Telescope (Astro-2) and various ground-based optical telescopes. The O VI emission lines are present in every instance in which the λλ6825, 7082 lines are present, in support of the Schmid Raman-scattering model. We calculate the scattering efficiencies and discuss the results in terms of the Raman-scattering model. Additionally, we measure the flux of the Fe II fluorescence line at 1776 Å, which is excited by the O VI line at 1032 Å, and calculate the first estimates of the conversion efficiencies for this process.

  16. Dissolved and labile concentrations of Cd, Cu, Pb, and Zn in the South Fork Coeur d'Alene River, Idaho: Comparisons among chemical equilibrium models and implications for biotic ligand models

    USGS Publications Warehouse

    Balistrieri, L.S.; Blank, R.G.

    2008-01-01

    In order to evaluate thermodynamic speciation calculations inherent in biotic ligand models, the speciation of dissolved Cd, Cu, Pb, and Zn in aquatic systems influenced by historical mining activities is examined using equilibrium computer models and the diffusive gradients in thin films (DGT) technique. Several metal/organic-matter complexation models, including WHAM VI, NICA-Donnan, and Stockholm Humic model (SHM), are used in combination with inorganic speciation models to calculate the thermodynamic speciation of dissolved metals and concentrations of metal associated with biotic ligands (e.g., fish gills). Maximum dynamic metal concentrations, determined from total dissolved metal concentrations and thermodynamic speciation calculations, are compared with labile metal concentrations measured by DGT to assess which metal/organic-matter complexation model best describes metal speciation and, thereby, biotic ligand speciation, in the studied systems. Results indicate that the choice of model that defines metal/organic-matter interactions does not affect calculated concentrations of Cd and Zn associated with biotic ligands for geochemical conditions in the study area, whereas concentrations of Cu and Pb associated with biotic ligands depend on whether the speciation calculations use WHAM VI, NICA-Donnan, or SHM. Agreement between labile metal concentrations and dynamic metal concentrations occurs when WHAM VI is used to calculate Cu speciation and SHM is used to calculate Pb speciation. Additional work in systems that contain wide ranges in concentrations of multiple metals should incorporate analytical speciation methods, such as DGT, to constrain the speciation component of biotic ligand models. ?? 2008 Elsevier Ltd.

  17. Differential determination of chromium(VI) and total chromium in natural waters using flow injection on-line separation and preconcentration electrothermal atomic absorption spectrometry.

    PubMed

    Sperling, M; Yin, X; Welz, B

    1992-03-01

    A rapid, sensitive and selective method for the differential determination of CrIII and CrVI in natural waters is described. Chromium(vi) can be determined directly by flow injection on-line sorbent extraction preconcentration coupled with electrothermal atomic absorption spectrometry using sodium diethyldithiocarbamate as the complexing agent and C18 bonded silica reversed-phase sorbent as the column material. Total Cr can be determined after oxidation of CrIII to CrVI by potassium peroxydisulfate. Chromium(III) can be calculated by difference. The optimum conditions for sorbent extraction of CrVI and oxidation of CrIII to CrVI are evaluated. A 12-fold enhancement in sensitivity compared with direct introduction of 40 microliters samples was achieved after preconcentration for 60 s, giving detection limits of 16 ng l-1 for CrVI and 18 ng l-1 for total Cr (based on 3 sigma). Results obtained for sea-water and river water reference materials were all within the certified range for total Cr with a precision of better than 10% relative standard deviation in the range 100-200 ng l-1. The selectivity of the determination of CrVI was evaluated by analysing spiked reference materials in the presence of CrIII, resulting in quantitative recovery of CrVI.

  18. Impact of Fe(III) as an effective electron-shuttle mediator for enhanced Cr(VI) reduction in microbial fuel cells: Reduction of diffusional resistances and cathode overpotentials.

    PubMed

    Wang, Qiang; Huang, Liping; Pan, Yuzhen; Quan, Xie; Li Puma, Gianluca

    2017-01-05

    The role of Fe(III) was investigated as an electron-shuttle mediator to enhance the reduction rate of the toxic heavy metal hexavalent chromium (Cr(VI)) in wastewaters, using microbial fuel cells (MFCs). The direct reduction of chromate (CrO 4 - ) and dichromate (Cr 2 O 7 2- ) anions in MFCs was hampered by the electrical repulsion between the negatively charged cathode and Cr(VI) functional groups. In contrast, in the presence of Fe(III), the conversion of Cr(VI) and the cathodic coulombic efficiency in the MFCs were 65.6% and 81.7%, respectively, 1.6 times and 1.4 folds as those recorded in the absence of Fe(III). Multiple analytical approaches, including linear sweep voltammetry, Tafel plot, cyclic voltammetry, electrochemical impedance spectroscopy and kinetic calculations demonstrated that the complete reduction of Cr(VI) occurred through an indirect mechanism mediated by Fe(III). The direct reduction of Cr(VI) with cathode electrons in the presence of Fe(III) was insignificant. Fe(III) played a critical role in decreasing both the diffusional resistance of Cr(VI) species and the overpotential for Cr(VI) reduction. This study demonstrated that the reduction of Cr(VI) in MFCs was effective in the presence of Fe(III), providing an alternative and environmentally benign approach for efficient remediation of Cr(VI) contaminated sites with simultaneous production of renewable energy. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Influence of calcite and dissolved calcium on uranium(VI) sorption to a hanford subsurface sediment.

    PubMed

    Dong, Wenming; Ball, William P; Liu, Chongxuan; Wang, Zheming; Stone, Alan T; Bai, Jing; Zachara, John M

    2005-10-15

    The influence of calcite and dissolved calcium on U(VI) adsorption was investigated using a calcite-containing sandy silt/clay sediment from the U. S. Department of Energy Hanford site. U(VI) adsorption to sediment, treated sediment, and sediment size fractions was studied in solutions that both had and had not been preequilibrated with calcite, at initial [U(VI)] = 10(-7)-10(-5) mol/L and final pH = 6.0-10.0. Kinetic and reversibility studies (pH 8.4) showed rapid sorption (30 min), with reasonable reversibility in the 3-day reaction time. Sorption from solutions equilibrated with calcite showed maximum U(VI) adsorption at pH 8.4 +/- 0.1. In contrast, calcium-free systems showed the greatest adsorption at pH 6.0-7.2. At pH > 8.4, U(VI) adsorption was identical from calcium-free and calcium-containing solutions. For calcite-presaturated systems, both speciation calculations and laser-induced fluorescence spectroscopic analyses indicated that aqueous U(VI) was increasingly dominated by Ca2UO2(CO3)3(0)(aq) at pH < 8.4 and thatformation of Ca2UO2(CO3)3(0)(aq) is what suppresses U(VI) adsorption. Above pH 8.4, aqueous U(VI) speciation was dominated by UO2(CO3)3(4-) in all solutions. Finally, results also showed that U(VI) adsorption was additive in regard to size fraction but not in regard to mineral mass: Carbonate minerals may have blocked U(VI) access to surfaces of higher sorption affinity.

  20. Ferrate(VI): a green chemical for the oxidation of cyanide in aqueous/waste solutions.

    PubMed

    Tiwari, Diwakar; Kim, Hyoung-Uk; Choi, Bong-Jong; Lee, Seung-Mok; Kwon, Oh-Heung; Choi, Kyu-Man; Yang, Jae-Kyu

    2007-05-01

    The higher oxidation state of iron, i.e. Fe(VI), was employed for the oxidation of the important toxic ion cyanide in aqueous/waste waters. Cyanide was oxidized to cyanate, which is 1,000 times less toxic than cyanide, and can often be accepted for its ultimate disposal. It was noted that Fe(VI) is a very powerful oxidizing agent, and can oxidize most of the cyanide within a few minutes, ca 5 minutes, of contact. The extent of the reduction of Fe(VI) was obtained using the UV-Visible measurements. Further, the UV-Visible data was used to explain the reaction kinetics involved in the redox reaction between ferrate(VI) and cyanide. The pseudo-first-order rate constant was calculated by maintaining the cyanide concentration in excess, with the overall second order rate constant values obtained for initial Fe(VI) concentrations of 1.0 and 0.1 mmol/L. The oxidation of cyanide was again confirmed using a cyanide probe. Fe(VI) was further employed for its possible application in the treatment of industrial wastewaters containing cyanide, along with some heavy metals, such as those obtained from electroplating industries.

  1. Hazards/Failure Modes and Effects Analysis MK 1 MOD 0 LSO-HUD Console System.

    DTIC Science & Technology

    1980-03-24

    AsI~f~ ! 127 = 3gc Z Isre -0 -q ~sI I I 𔃻~~~ ~ _ _ 3_______ II! -0udC Z Z’ P4 12 d-U * ~s ’:i~i42 S- 60 -, Uh ~ U3l I OM -C ~ . - U 4~ dcd 8U-q Ali...8 VI SCOPE AND METHODOLOGY OF ANALYSIS ........ 1O FIGURE 1: H/ FMEA /(SSA) WORK SHEET FORMAT ........... 14 APPENDIX A: HAZARD/FAILURE MODES AND...EFFECTS ANALYSIS (H/ FMEA ) -- WORK SHEETS ......... 15(A-O) TABLE: SUBSYSTEM: UNIT I Heads-Up Display Console .............. 17(A-1) UNIT 2 Auxiliary

  2. Antiproton Trapping for Advanced Space Propulsion Applications

    NASA Technical Reports Server (NTRS)

    Smith, Gerald A.

    1998-01-01

    The Summary of Research parallels the Statement of Work (Appendix I) submitted with the proposal, and funded effective Feb. 1, 1997 for one year. A proposal was submitted to CERN in October, 1996 to carry out an experiment on the synthesis and study of fundamental properties of atomic antihydrogen. Since confined atomic antihydrogen is potentially the most powerful and elegant source of propulsion energy known, its confinement and properties are of great interest to the space propulsion community. Appendix II includes an article published in the technical magazine Compressed Air, June 1997, which describes CERN antiproton facilities, and ATHENA. During the period of this grant, Prof. Michael Holzscheiter served as spokesman for ATHENA and, in collaboration with Prof. Gerald Smith, worked on the development of the antiproton confinement trap, which is an important part of the ATHENA experiment. Appendix III includes a progress report submitted to CERN on March 12, 1997 concerning development of the ATHENA detector. Section 4.1 reviews technical responsibilities within the ATHENA collaboration, including the Antiproton System, headed by Prof. Holzscheiter. The collaboration was advised (see Appendix IV) on June 13, 1997 that the CERN Research Board had approved ATHENA for operation at the new Antiproton Decelerator (AD), presently under construction. First antiproton beams are expected to be delivered to experiments in about one year. Progress toward assembly of the ATHENA detector and initial testing expected in 1999 has been excellent. Appendix V includes a copy of the minutes of the most recently documented collaboration meeting held at CERN of October 24, 1997, which provides more information on development of systems, including the antiproton trapping apparatus. On February 10, 1998 Prof. Smith gave a 3 hour lecture on the Physics of Antimatter, as part of the Physics for the Third Millennium Lecture Series held at MSFC. Included in Appendix VI are notes and graphs presented on the ATHENA experiment. Portable antiproton trap has been under development. The goal is to store and transport antiprotons from a production site, such as Fermilab near Chicago, to a distant site, such as Huntsville, AL, thus demonstrating the portability of antiprotons.

  3. 24 CFR Appendix A to Part 1000 - Indian Housing Block Grant Formula Mechanics

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Indian Housing Block Grant Formula... Housing Block Grant Formula Mechanics This appendix shows the different components of the IHBG formula... Housing Block Grant (IHBG) formula is calculated by initially determining the amount a tribe receives for...

  4. 49 CFR Appendix C to Part 222 - Guide to Establishing Quiet Zones

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Horns will not be subject to annual reviews. (5) The use of FRA's web-based Quiet Zone Calculator is... appendix A (e.g., shorter than required traffic channelization devices), non-engineering ASMs (e.g., programmed law enforcement), and engineering ASMs (i.e., engineering improvements other than modified SSMs...

  5. Load-dependent ADP binding to myosins V and VI: Implications for subunit coordination and function

    PubMed Central

    Oguchi, Yusuke; Mikhailenko, Sergey V.; Ohki, Takashi; Olivares, Adrian O.; De La Cruz, Enrique M.; Ishiwata, Shin'ichi

    2008-01-01

    Dimeric myosins V and VI travel long distances in opposite directions along actin filaments in cells, taking multiple steps in a “hand-over-hand” fashion. The catalytic cycles of both myosins are limited by ADP dissociation, which is considered a key step in the walking mechanism of these motors. Here, we demonstrate that external loads applied to individual actomyosin V or VI bonds asymmetrically affect ADP affinity, such that ADP binds weaker under loads assisting motility. Model-based analysis reveals that forward and backward loads modulate the kinetics of ADP binding to both myosins, although the effect is less pronounced for myosin VI. ADP dissociation is modestly accelerated by forward loads and inhibited by backward loads. Loads applied in either direction slow ADP binding to myosin V but accelerate binding to myosin VI. We calculate that the intramolecular load generated during processive stepping is ≈2 pN for both myosin V and myosin VI. The distinct load dependence of ADP binding allows these motors to perform different cellular functions. PMID:18509050

  6. Facile synthesis of magnetic Fe3O4/graphene composites for enhanced U(VI) sorption

    NASA Astrophysics Data System (ADS)

    Zhao, Donglin; Zhu, Hongyu; Wu, Changnian; Feng, Shaojie; Alsaedi, Ahmed; Hayat, Tasawar; Chen, Changlun

    2018-06-01

    A novel magnetic Fe3O4/graphene composite (FGC) was fabricated by a facile one-step reaction route and shown to be effective for sorbing U(VI) from aqueous solution. The structure, properties and application of the prepared FGC composite were well evaluated. The high saturation magnetization (45.6 emu/g) made FGC easier to be separated from the media within several seconds under an external magnetic. Effects of different ambient conditions (i.e., pH and ionic strength, contact time, temperatures) on sorption behaviors of U(VI) on FGC were carried out by batch experiments. According to the calculation of Langmuir model, the maximum sorption capacity of U(VI) on the FGC at pH 5.5 and 298 K was 176.47 mg/g. The sorption was correlated with the effects of pH, contact time, and temperature. X-ray photoelectron spectroscopy analysis revealed that U(VI) was sorbed on FGC via oxygen-containing functional groups. This work demonstrated that FGC could be recycled and used as an effective recyclable sorbent for sorption of U(VI).

  7. Calculating inspector probability of detection using performance demonstration program pass rates

    NASA Astrophysics Data System (ADS)

    Cumblidge, Stephen; D'Agostino, Amy

    2016-02-01

    The United States Nuclear Regulatory Commission (NRC) staff has been working since the 1970's to ensure that nondestructive testing performed on nuclear power plants in the United States will provide reasonable assurance of structural integrity of the nuclear power plant components. One tool used by the NRC has been the development and implementation of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section XI Appendix VIII[1] (Appendix VIII) blind testing requirements for ultrasonic procedures, equipment, and personnel. Some concerns have been raised, over the years, by the relatively low pass rates for the Appendix VIII qualification testing. The NRC staff has applied statistical tools and simulations to determine the expected probability of detection (POD) for ultrasonic examinations under ideal conditions based on the pass rates for the Appendix VIII qualification tests for the ultrasonic testing personnel. This work was primarily performed to answer three questions. First, given a test design and pass rate, what is the expected overall POD for inspectors? Second, can we calculate the probability of detection for flaws of different sizes using this information? Finally, if a previously qualified inspector fails a requalification test, does this call their earlier inspections into question? The calculations have shown that one can expect good performance from inspectors who have passed appendix VIII testing in a laboratory-like environment, and the requalification pass rates show that the inspectors have maintained their skills between tests. While these calculations showed that the PODs for the ultrasonic inspections are very good under laboratory conditions, the field inspections are conducted in a very different environment. The NRC staff has initiated a project to systematically analyze the human factors differences between qualification testing and field examinations. This work will be used to evaluate and prioritize potential human factors issues that may degrade performance in the field.

  8. Natural and man-made hexavalent chromium, Cr(VI), in groundwater near a mapped plume, Hinkley, California—study progress as of May 2017, and a summative-scale approach to estimate background Cr(VI) concentrations

    USGS Publications Warehouse

    Izbicki, John A.; Groover, Krishangi D.

    2018-03-22

    This report describes (1) work done between January 2015 and May 2017 as part of the U.S. Geological Survey (USGS) hexavalent chromium, Cr(VI), background study and (2) the summative-scale approach to be used to estimate the extent of anthropogenic (man-made) Cr(VI) and background Cr(VI) concentrations near the Pacific Gas and Electric Company (PG&E) natural gas compressor station in Hinkley, California. Most of the field work for the study was completed by May 2017. The summative-scale approach and calculation of Cr(VI) background were not well-defined at the time the USGS proposal for the background Cr(VI) study was prepared but have since been refined as a result of data collected as part of this study. The proposed summative scale consists of multiple items, formulated as questions to be answered at each sampled well. Questions that compose the summative scale were developed to address geologic, hydrologic, and geochemical constraints on Cr(VI) within the study area. Each question requires a binary (yes or no) answer. A score of 1 will be assigned for an answer that represents data consistent with anthropogenic Cr(VI); a score of –1 will be assigned for an answer that represents data inconsistent with anthropogenic Cr(VI). The areal extent of anthropogenic Cr(VI) estimated from the summative-scale analyses will be compared with the areal extent of anthropogenic Cr(VI) estimated on the basis of numerical groundwater flow model results, along with particle-tracking analyses. On the basis of these combined results, background Cr(VI) values will be estimated for “Mojave-type” deposits, and other deposits, in different parts of the study area outside the summative-scale mapped extent of anthropogenic Cr(VI).

  9. Coherent and incoherent phase stabilities of thermoelectric rocksalt IV-VI semiconductor alloys

    NASA Astrophysics Data System (ADS)

    Doak, Jeff W.; Wolverton, C.

    2012-10-01

    Nanostructures formed by phase separation improve the thermoelectric figure of merit in lead chalcogenide semiconductor alloys, with coherent nanostructures giving larger improvements than incoherent nanostructures. However, large coherency strains in these alloys drastically alter the thermodynamics of phase stability. Incoherent phase stability can be easily inferred from an equilibrium phase diagram, but coherent phase stability is more difficult to assess experimentally. Therefore, we use density functional theory calculations to investigate the coherent and incoherent phase stability of the IV-VI rocksalt semiconductor alloy systems Pb(S,Te), Pb(Te,Se), Pb(Se,S), (Pb,Sn)Te, (Sn,Ge)Te, and (Ge,Pb)Te. Here we use the term coherent to indicate that there is a common and unbroken lattice between the phases under consideration, and we use the term incoherent to indicate that the lattices of coexisting phases are unconstrained and allowed to take on equilibrium volumes. We find that the thermodynamic ground state of all of the IV-VI pseudobinary systems studied is incoherent phase separation. We also find that the coherency strain energy, previously neglected in studies of these IV-VI alloys, is lowest along [111] (in contrast to most fcc metals) and is a large fraction of the thermodynamic driving force for incoherent phase separation in all systems. The driving force for coherent phase separation is significantly reduced, and we find that coherent nanostructures can only form at low temperatures where kinetics may prohibit their precipitation. Furthermore, by calculating the energies of ordered structures for these systems we find that the coherent phase stability of most IV-VI systems favors ordering over spinodal decomposition. Our results suggest that experimental reports of spinodal decomposition in the IV-VI rocksalt alloys should be re-examined.

  10. Calculations of Maxwellian-averaged cross sections and astrophysical reaction rates using the ENDF/B-VII.0, JEFF-3.1, JENDL-3.3, and ENDF/B-VI.8 evaluated nuclear reaction data libraries

    NASA Astrophysics Data System (ADS)

    Pritychenko, B.; Mughaghab, S. F.; Sonzogni, A. A.

    2010-11-01

    We have calculated the Maxwellian-averaged cross sections and astrophysical reaction rates of the stellar nucleosynthesis reactions (n, γ), (n, fission), (n, p), (n, α), and (n, 2n) using the ENDF/B-VII.0, JEFF-3.1, JENDL-3.3, and ENDF/B-VI.8 evaluated nuclear reaction data libraries. These four major nuclear reaction libraries were processed under the same conditions for Maxwellian temperatures (kT) ranging from 1 keV to 1 MeV. We compare our current calculations of the s-process nucleosynthesis nuclei with previous data sets and discuss the differences between them and the implications for nuclear astrophysics.

  11. Contrast-enhanced power Doppler endosonography and pathological assessment of vascularization in advanced gastric carcinomas--a feasibility study.

    PubMed

    Iordache, Sevastiţa; Filip, Maria-Monalisa; Georgescu, Claudia-Valentina; Angelescu, Cristina; Ciurea, Tudorel; Săftoiu, Adrian

    2012-06-01

    Besides representing angiogenesis markers, microvascular density (MVD) and vascular endothelial growth factor (VEGF) are two important tools for the assessment of prognosis in patients with gastric cancer. The aim of our study was to assess the Doppler parameters (resistivity and pulsatility indexes) and vascularity index (VI) calculated by contrast-enhanced power Doppler endoscopic ultrasound (CEPD-EUS) in correlation with the expression of intra-tumoral MVD and VEGF in patients with gastric cancer. The study included 20 consecutive patients with advanced gastric carcinoma, but without distant metastasis at initial assessment. All the patients were assessed by contrast-enhanced power Doppler endoscopic ultrasound (EUS) combined with pulsed Doppler examinations in the late venous phase. The vascularity index (VI) was calculated before and after injection of second generation microbubble contrast specific agent (SonoVue 2.4 mL), used as a Doppler signal enhancer. Moreover, pulsed Doppler parameters (resistivity and pulsatility indexes) were further calculated. The correlation between power Doppler parameters and pathological/molecular parameters (MVD assessed through immunohistochemistry with CD31 and CD34, as well as VEGF assessed through real-time PCR) was assessed. Kaplan-Meier survival analysis was used for the assessment of prognosis. Significantly statistical correlations were found between post-contrast VI and CD34 (p=0.0226), VEGF (p=0.0231), VEGF-A (p=0.0464) and VEGF-B (p=0.0022) while pre-contrast VI was correlated only with CD34 expression. Pulsatility index and resistivity index were not correlated with MVD or VEGF expression. Survival analysis demonstrated that VEGF-A is an accurate parameter for survival rate (p=0.045), as compared to VEGF (p=0.085) and VEGF-B (p=0.230). We did not find any correlation between the survival rate and ultrasound parameters (RI, PI, pre-contrast VI or post-contrast VI). Assessment of tumor vascularity using contrast-enhanced EUS, including analysis of spectral Doppler parameters is possible and feasible in gastric cancer patients. A correlation between measured EUS vascularity and pathological parameters of angiogenesis (MVD and VEGF expression) was found.

  12. Analysis of radiation exposure for naval units of Operation Crossroads. Volume 3. (Appendix B) support ships. Technical report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weitz, R.; Thomas, C.; Klemm, J.

    1982-03-03

    External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details themore » results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.« less

  13. Analysis of radiation exposure for naval units of Operation Crossroads. Volume 2. (Appendix A) target ships. Technical report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weitz, R.; Thomas, C.; Klemm, J.

    1982-03-03

    External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details themore » results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those, approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.« less

  14. The biomineralization process of uranium(VI) by Saccharomyces cerevisiae - transformation from amorphous U(VI) to crystalline chernikovite.

    PubMed

    Shen, Yanghao; Zheng, Xinyan; Wang, Xiaoyu; Wang, Tieshan

    2018-05-01

    Microorganisms play a significant role in uranium(VI) biogeochemistry and influence U(VI) transformation through biomineralization. In the present work, the process of uranium mineralization was investigated by Saccharomyces cerevisiae. The toxicity experiments showed that the viability of cell was not significantly affected by 100 mg L -1 U(VI) under 4 days of exposure time. The batch experiments showed that the phosphate concentration and pH value increased over time during U(VI) adsorption. Meanwhile, thermodynamic calculations demonstrated that the adsorption system was supersaturated with respect to UO 2 HPO 4 . The X-ray powder diffraction spectroscopy (XRD), field emission scanning electron microscopy (FE-SEM) equipped with energy dispersive spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analyses indicated that the U(VI) was first attached onto the cell surface and reacted with hydroxyl, carboxyl, and phosphate groups through electrostatic interactions and complexation. As the immobilization of U(VI) transformed it from the ionic to the amorphous state, lamellar uranium precipitate was formed on the cell surface. With the prolongation of time, the amorphous uranium compound disappeared, and there were some crystalline substances observed extracellularly, which were well-characterized as tetragonal-chernikovite. Furthermore, the size of chernikovite was regulated at nano-level by cells, and the perfect crystal was formed finally. These findings provided an understanding of the non-reductive transformation process of U(VI) from the amorphous to crystalline state within microbe systems, which would be beneficial for the U(VI) treatment and reuse of nuclides and heavy metals.

  15. 49 CFR Appendix D to Part 604 - Table of Potential Remedies

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Table of Potential Remedies D Appendix D to Part... Potential Remedies Remedy Assessment Matrix: ER11AU08.015 FTA's Remedy Policy — This remedy policy applies.... — Remedy calculation is based on the following elements: (1) The nature and circumstances of the violation...

  16. 49 CFR Appendix D to Part 604 - Table of Potential Remedies

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Table of Potential Remedies D Appendix D to Part... Potential Remedies Remedy Assessment Matrix: ER11AU08.015 FTA's Remedy Policy — This remedy policy applies.... — Remedy calculation is based on the following elements: (1) The nature and circumstances of the violation...

  17. 45 CFR Appendix C to Part 1356 - Calculating Sample Size for NYTD Follow-Up Populations

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Populations C Appendix C to Part 1356 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE... Follow-Up Populations 1. Using Finite Population Correction The Finite Population Correction (FPC) is applied when the sample is drawn from a population of one to 5,000 youth, because the sample is more than...

  18. 45 CFR Appendix C to Part 1356 - Calculating Sample Size for NYTD Follow-Up Populations

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Populations C Appendix C to Part 1356 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE... Follow-Up Populations 1. Using Finite Population Correction The Finite Population Correction (FPC) is applied when the sample is drawn from a population of one to 5,000 youth, because the sample is more than...

  19. 45 CFR Appendix C to Part 1356 - Calculating Sample Size for NYTD Follow-Up Populations

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Populations C Appendix C to Part 1356 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE... Follow-Up Populations 1. Using Finite Population Correction The Finite Population Correction (FPC) is applied when the sample is drawn from a population of one to 5,000 youth, because the sample is more than...

  20. Detailed Performance Calculations: Wayne State University and Ford Motor Company, Appendix C

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The laser-generated OH through ozone dissociation is defined in equations. Using these equations, the ozone interference levels corresponding to various humidity and ozone concentrations can be calculated readily.

  1. Detailed performance calculations: Wayne State University and Ford Motor Company, appendix C

    NASA Astrophysics Data System (ADS)

    1984-12-01

    The laser-generated OH through ozone dissociation is defined in equations. Using these equations, the ozone interference levels corresponding to various humidity and ozone concentrations can be calculated readily.

  2. D0 Silicon Upgrade: ASME Code and Pressure Calculations for Liquid Nitrogen Subcooler

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kuwazaki, Andrew; Leicht, Todd; /Fermilab

    1995-10-04

    Included in this engineering note are three separate calculation divisions. The first calculations are the determination of the required thickness of the LN{sub 2} subcooler flat head according to ASME code. This section includes Appendix A-C. The minimum plate thickness determined was 0.563 in. The actual thickness chosen in fabrication was a 3/4-inch plate milled to 0.594-inch at the bolt circle. Along with the plate thickness, this section calculates the required reinforcement area at the top plate penetrations. It was found that a 1/4-inch fillet weld at each penetration was adequate. The next set of calculations were done to provemore » that the subcooler internal pressure will always be less than 15 psig and therefore will not be classified as a pressure vessel. The subcooler is always open to a vent pipe. Appendix D calculations show that the vent pipe has a capacity of 1042 lbs/hr if 15 psig is present at the subcooler. It goes on to show that the inlet piping would at that flow rate, see a pressure drop of 104 psig. The maximum supply pressure of the LN{sub 2} storage dewar is 50 psig. Appendix E addresses required flow rates for steady state, loss of vacuum, or fire conditions. Page E9 shows a summary which states the maximum pressure would be 1.50 psig at fire conditions and internal pressure.« less

  3. The VI-SENSE-vaginal discharge self-test to facilitate management of vaginal symptoms.

    PubMed

    Geva, Adam; Bornstein, Jacob; Dan, Michael; Shoham, Hadar Kessary; Sobel, Jack D

    2006-11-01

    This study was undertaken to evaluate a diagnostic panty liner (VI-SENSE) (Common Sense, Caesarea, Israel) developed to facilitate diagnosis of vaginal infections by detecting disordered acidity level. Five hundred sixteen women with vulvovaginal symptoms were enrolled. Final clinical diagnosis included Amsel criteria, Gram stain analysis, pH determination, and Trichomonas vaginalis and Candida culture. VI-SENSE strip color status estimated by patients was compared with clinical diagnosis and pH measurement by using nitrazine paper. Statistical analysis included sensitivity and specificity calculations. The VI-SENSE test was positive in 226 of 249 patients (90.8%) with bacterial vaginosis or trichomoniasis. Nitrazine pH paper revealed elevated pH in 165 (66.5%) and the amine test was positive in 160 (64.3%) patients. The VI-SENSE test was negative in 217 of 267 patients (81.3%) without trichomoniasis or bacterial vaginosis. The VI-SENSE was positive in 85 of 92 women (92%), with mixed vaginal infection including Candida and bacterial vaginosis or trichomoniasis. Amine test, nitrazine pH paper and physician diagnosis relying only on speculum examination were inferior and positive in only 65 (70%), 59 (64%), and 66 (72%) patients, respectively. The VI-SENSE test was found to be superior to traditional individual tests in facilitating preliminary diagnosis of vaginal infections.

  4. Design of cadmium-free colloidal II-VI semiconductor quantum dots exhibiting RGB emission

    NASA Astrophysics Data System (ADS)

    Asano, Hiroshi; Omata, Takahisa

    2017-04-01

    The size and composition dependence of the optical gap of colloidal alloyed quantum dots (QDs) of Zn(Te1-xSex) and Zn(Te1-xSx) were calculated by the finite-depth-well effective mass approximation method. QDs that exhibited red, green and blue emission were explored to develop cadmium-free II-VI chalcogenide-based QD-phosphors. We considered that highly monodisperse colloidal QDs with diameters of 3-6 nm are easy to synthesize and II-VI semiconductor QDs usually exhibit a Stokes shift ranging between 50 and 150 meV. We showed that Zn(Te1-xSex) QDs with 0.02≤x≤0.68, and 0≤x≤0.06, and 0.66≤x≤0.9 may be expected to exhibit green, and blue emission, respectively. Zn(Te1-xSx) QDs with 0.26≤x≤0.37, 0.01≤x≤0.2 and 0.45≤x≤0.61, 0≤x≤0.02, and 0.63≤x≤0.72, should give red, green and blue emission respectively. On the basis of our calculations, we showed that Zn(Te,Se) and Zn(Te,S) QDs are very promising cadmium-free II-VI chalcogenide semiconductor QD phosphors.

  5. VizieR Online Data Catalog: Ba V, Ba VI, and Ba VII oscillator strengths (Rauch+, 2014)

    NASA Astrophysics Data System (ADS)

    Rauch, T.; Werner, K.; Quinet, P.; Kruk, J. W.

    2014-04-01

    table1.dat contains calculated HFR oscillator strengths (loggf) and transition probabilities (gA, in 1/s) in Ba V. CF is the cancellation factor as defined by Cowan (1981). In columns 3 and 6, e is written for even and o for odd. table2.dat contains calculated HFR oscillator strengths (loggf) and transition probabilities (gA, in 1/s) in Ba VI. CF is the cancellation factor as defined by Cowan (1981). In columns 3 and 6, e is written for even and o for odd. table3.dat contains calculated HFR oscillator strengths (loggf) and transition probabilities (gA, in 1/s) in Ba VII. CF is the cancellation factor as defined by Cowan (1981). In columns 3 and 6, e is written for even and o for odd. (3 data files).

  6. 40 CFR Appendix T to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Sulfur (Sulfur...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-hour SO2 concentration values measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values are the metrics (i.e., statistics) that are compared to the NAAQS levels to determine compliance, calculated as specified in section 5 of this appendix. The design value...

  7. 40 CFR Appendix T to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Sulfur (Sulfur...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-hour SO2 concentration values measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values are the metrics (i.e., statistics) that are compared to the NAAQS levels to determine compliance, calculated as specified in section 5 of this appendix. The design value...

  8. 40 CFR Appendix T to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Sulfur (Sulfur...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-hour SO2 concentration values measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values are the metrics (i.e., statistics) that are compared to the NAAQS levels to determine compliance, calculated as specified in section 5 of this appendix. The design value...

  9. 40 CFR Appendix T to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Sulfur (Sulfur...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-hour SO2 concentration values measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values are the metrics (i.e., statistics) that are compared to the NAAQS levels to determine compliance, calculated as specified in section 5 of this appendix. The design value...

  10. 40 CFR Appendix T to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Sulfur (Sulfur...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-hour SO2 concentration values measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values are the metrics (i.e., statistics) that are compared to the NAAQS levels to determine compliance, calculated as specified in section 5 of this appendix. The design value...

  11. 12 CFR Appendix C to Part 567 - Risk-Based Capital Requirements-Internal-Ratings-Based and Advanced Measurement Approaches

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... calculated under this appendix by the savings association for one or more exposures is not commensurate with... one or more exposures, provided that: (1) The savings association can demonstrate on an ongoing basis... this context, backtesting is one form of out-of-sample testing. Bank holding company is defined in...

  12. 46 CFR Appendix A to Part 154 - Equivalent Stress

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Equivalent Stress A Appendix A to Part 154 Shipping...—Equivalent Stress I. Equivalent stress (σ c) is calculated by the following formula or another formula... normal stress in “x” direction. σy=total normal stress in “y” direction. τxy=total shear stress in “xy...

  13. 46 CFR Appendix A to Part 154 - Equivalent Stress

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Equivalent Stress A Appendix A to Part 154 Shipping...—Equivalent Stress I. Equivalent stress (σ c) is calculated by the following formula or another formula... normal stress in “x” direction. σy=total normal stress in “y” direction. τxy=total shear stress in “xy...

  14. 46 CFR Appendix A to Part 154 - Equivalent Stress

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Equivalent Stress A Appendix A to Part 154 Shipping...—Equivalent Stress I. Equivalent stress (σ c) is calculated by the following formula or another formula... normal stress in “x” direction. σy=total normal stress in “y” direction. τxy=total shear stress in “xy...

  15. 46 CFR Appendix A to Part 154 - Equivalent Stress

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Equivalent Stress A Appendix A to Part 154 Shipping...—Equivalent Stress I. Equivalent stress (σ c) is calculated by the following formula or another formula... normal stress in “x” direction. σy=total normal stress in “y” direction. τxy=total shear stress in “xy...

  16. 12 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 327

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... one year; • Minimum and maximum downgrade probability cutoff values, based on data from June 30, 2008... rate factor (Ai,T) is calculated by subtracting 0.4 from the four-year cumulative gross asset growth... weighted average of five component ratings excluding the “S” component. Delinquency and non-accrual data on...

  17. 40 CFR 51.1005 - One-year extensions of the attainment date.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... according to the data analysis requirements in 40 CFR part 50, appendix N). (2) For an area that violates... recent year at each monitor is 65 µg/m3 or less (calculated according to the data analysis requirements... the data analysis requirements in 40 CFR part 50, appendix N). (2) For an area that violates the 24...

  18. 46 CFR Appendix A to Part 154 - Equivalent Stress

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Equivalent Stress A Appendix A to Part 154 Shipping...—Equivalent Stress I. Equivalent stress (σ c) is calculated by the following formula or another formula... normal stress in “x” direction. σy=total normal stress in “y” direction. τxy=total shear stress in “xy...

  19. [A study of Ververck index in 16 865 singleton neonates with a gestational age of 27-42 weeks in Shenzhen, China].

    PubMed

    Huang, Xiao-Yun; Liu, Hui-Long; Lei, Min; Lian, Zhao-Hui; Mai, Hui-Fen

    2018-01-01

    Ververck index (VI) reflects thoracic development, body type, and nutritional status. This study aimed to investigate the VI of singleton neonates with a gestational age (GA) of 27-42 weeks at birth, and to establish percentile curves of VI of the neonates. Cross-sectional cluster sampling was performed between April 2013 and September 2015. Body weight, body length, and chest circumference were measured for 16 865 singleton neonates with a GA of 27-42 weeks in two hospitals in Shenzhen, China. VI was calculated and the percentile curves of VI were plotted for the neonates. Mean VIs were obtained for singleton neonates with a gestational age of 27-42 weeks (in three groups of male, female, and both sexes), and related 3rd-97th percentile curves were plotted. As for the 50th percentile curve, the singleton neonates with a GA of 27 weeks had the lowest 50th percentile value of VI, which gradually increased with the increase in GA. The singleton neonates with a GA of 42 weeks had the highest 50th percentile value of VI. Girls had a slightly higher 50th percentile value of VI than boys in all GA groups. VI of neonates increases with the increase in GA. Female neonates may have a slightly better thoracic development, body type, and nutritional status than male neonates at birth. The percentile curves of VI plotted for singleton neonates with a GA of 27-42 weeks (in three groups of male, female, and both sexes) can provide a basis for evaluating thoracic development, body type, and nutritional status of neonates at birth in Shenzhen, China.

  20. Long-term diffusion of U(VI) in bentonite: Dependence on density

    DOE PAGES

    Joseph, Claudia; Mibus, Jens; Trepte, Paul; ...

    2016-10-12

    As a contribution to the safety assessment of nuclear waste repositories, U(VI) diffusion through the potential buffer material MX-80 bentonite was investigated at three clay dry densities over six years. Synthetic MX-80 model pore water was used as background electrolyte. Speciation calculations showed that Ca 2UO 2(CO 3) 3(aq) was the main U(VI) species. The in- and out-diffusion of U(VI) was investigated separately. U(VI) diffused about 3 mm, 1.5 mm, and 1 mm into the clay plug at ρ = 1.3, 1.6, and 1.9 g/cm 3, respectively. No through-diffusion of the U(VI) tracer was observed. However, leaching of natural uraniummore » contained in the clay occurred and uranium was detected in all receiving reservoirs. As expected, the effective and apparent diffusion coefficients, D e and D a, decreased with increasing dry density. The D a values for the out-diffusion of natural U(VI) were in good agreement with previously determined values. Surprisingly, D a values for the in-diffusion of U(VI) were about two orders of magnitude lower than values obtained in short-term in-diffusion experiments reported in the literature. Some potential reasons for this behavior that were evaluated are changes of the U(VI) speciation within the clay (precipitation, reduction) or changes of the clay porosity and pore connectivity with time. By applying Archie's law and the extended Archie's law, it was estimated that a significantly smaller effective porosity must be present for the long-term in-diffusion of U(VI). Finally, the results suggest that long-term studies of key transport phenomena may reveal additional processes that can directly impact long-term repository safety assessments.« less

  1. Methods for Estimating Adsorbed Uranium(VI) and Distribution Coefficients of Contaminated Sediments

    USGS Publications Warehouse

    Kohler, M.; Curtis, G.P.; Meece, D.E.; Davis, J.A.

    2004-01-01

    Assessing the quantity of U(VI) that participates in sorption/desorption processes in a contaminated aquifer is an important task when investigating U migration behavior. U-contaminated aquifer sediments were obtained from 16 different locations at a former U mill tailings site at Naturita, CO (U.S.A.) and were extracted with an artificial groundwater, a high pH sodium bicarbonate solution, hydroxylamine hydrochloride solution, and concentrated nitric acid. With an isotopic exchange method, both a KD value for the specific experimental conditions as well as the total exchangeable mass of U(VI) was determined. Except for one sample, KD values determined by isotopic exchange with U-contaminated sediments that were in equilibrium with atmospheric CO2 agreed within a factor of 2 with KD values predicted from a nonelectrostatic surface complexation model (NEM) developed from U(VI) adsorption experiments with uncontaminated sediments. The labile fraction of U(VI) and U extracted by the bicarbonate solution were highly correlated (r2 = 0.997), with a slope of 0.96 ?? 0.01. The proximity of the slope to one suggests that both methods likely access the same reservoir of U(VI) associated with the sediments. The results indicate that the bicarbonate extraction method is useful for estimating the mass of labile U(VI) in sediments that do not contain U(IV). In-situ KD values calculated from the measured labile U(VI) and the dissolved U(VI) in the Naturita alluvial aquifer agreed within a factor of 3 with in-situ K D values predicted with the NEM and groundwater chemistry at each well.

  2. Calculations of the Supersonic Wave Drag of Nonlifting Wings with Arbitrary Sweepback and Aspect Ratio Wings Swept Behind the Mach Lines

    DTIC Science & Technology

    1947-02-21

    refers to an airfoil section cenrposed of two parabolic arcs. £1 each case, the ving is con - sidered to be cut off in a direction parallel to the... pro - f:llo (fig. -(b) and appendix A, oquation (A?-))> The drag cooffl- clonts &ct\\ and ^caTT &?e obtained slmilurly by integrating along tho...appendix D. Bra» coefficient of swot -tack wlnfl at Mach number of 1.0. - Tho solution of the equations for c. fiven in appendix 3 shown tliat, for

  3. Imaging, photophysical properties and DFT calculations of manganese blue (barium manganate(VI) sulphate)--a modern pigment.

    PubMed

    Accorsi, Gianluca; Verri, Giovanni; Acocella, Angela; Zerbetto, Francesco; Lerario, Giovanni; Gigli, Giuseppe; Saunders, David; Billinge, Rachel

    2014-12-18

    Manganese blue is a synthetic barium manganate(VI) sulphate compound that was produced from 1935 to the 1990s and was used both as a blue pigment in works of art and by conservators in the restoration of paintings. The photophysical properties of the compound are described as well as the setup needed to record the spatial distribution of the pigment in works of art.

  4. Computed potential energy surfaces for chemical reactions

    NASA Technical Reports Server (NTRS)

    Heinemann, K.; Walch, Stephen P.

    1992-01-01

    The work on the NH + NO system which was described in the last progress report was written up and a draft of the manuscript is included in the appendix. The appendix also contains a draft of a manuscript on an Ar + H + H surface. New work which was completed in the last six months includes the following: (1) calculations on the (1)CH2 + H2O, H2 + HCOH, and H2 + H2CO product channels in the CH3 + OH reaction; (2) calculations for the NH2 + O reaction; (3) calculations for the CH3 + O2 reaction; and (4) calculations for CH3O and the two decomposition channels--CH2OH and H + H2CO. Detailed descriptions of this work will be given in manuscripts; however, brief descriptions of the CH3 + OH and CH3 + O2 projects are given.

  5. 14 CFR 36.803 - Noise evaluation and calculation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Noise evaluation and calculation. 36.803... AIRCRAFT NOISE STANDARDS: AIRCRAFT TYPE AND AIRWORTHINESS CERTIFICATION Helicopters § 36.803 Noise evaluation and calculation. The noise measurement data required under § 36.801 and obtained under appendix H...

  6. 14 CFR 36.803 - Noise evaluation and calculation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Noise evaluation and calculation. 36.803... AIRCRAFT NOISE STANDARDS: AIRCRAFT TYPE AND AIRWORTHINESS CERTIFICATION Helicopters § 36.803 Noise evaluation and calculation. The noise measurement data required under § 36.801 and obtained under appendix H...

  7. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hawkins, Cory A.; Bustillos, Christian G.; May, Iain

    Conventional solvent extraction of selected f-element cations by bis(2-ethylhexyl)phosphoric acid (HDEHP) yields increased extraction from aqueous to organic solution along the series Np(V) < Cm(III) < Eu(III) < U(VI), with distribution ratios all within two orders of magnitude. However, in the presence of the water-soluble tetradentate Schiff base (N,N'-bis(5-sulfonatosalicylidene)-ethylenediamine or H 2salenSO 3), selective complexation of the two actinyl cations (Np(V) and U(VI)) resulted in an extraction order of Np(V) < U(VI) << Eu(III) < Cm(III). The extraction of neither Cm(III) or Eu(III) by HDEHP are significantly impacted by the presence of the aqueous phase Schiff base. Despite observed hydrolyticmore » decomposition of H 2salenSO 3 in aqueous solutions, the calculated high conditional stability constant (β 11 = 26) for the complex [UO 2(salenSO 3)] 2- demonstrates its capacity for aqueous hold-back of U(VI). UV-visible-NIR spectroscopy of solutions prepared with a Np(VI) stock and H 2salenSO 3 suggest that reduction of Np(VI) to Np(V) by the ligand was rapid, resulting in a pentavalent Np complex that was substantially retained in the aqueous phase. Lastly, results from 1H NMR of aqueous solutions of H 2salenSO 3 with U(VI) and La(III), Eu(III), and Lu(III) provides additional evidence that the ligand readily chelates U(VI), but has only weak interactions with trivalent lanthanide ions.« less

  8. Macroscopic and Microscopic Investigation of U(VI) and Eu(III) Adsorption on Carbonaceous Nanofibers.

    PubMed

    Sun, Yubing; Wu, Zhen-Yu; Wang, Xiangxue; Ding, Congcong; Cheng, Wencai; Yu, Shu-Hong; Wang, Xiangke

    2016-04-19

    The adsorption mechanism of U(VI) and Eu(III) on carbonaceous nanofibers (CNFs) was investigated using batch, IR, XPS, XANES, and EXAFS techniques. The pH-dependent adsorption indicated that the adsorption of U(VI) on the CNFs was significantly higher than the adsorption of Eu(III) at pH < 7.0. The maximum adsorption capacity of the CNFs calculated from the Langmuir model at pH 4.5 and 298 K for U(VI) and Eu(III) were 125 and 91 mg/g, respectively. The CNFs displayed good recyclability and recoverability by regeneration experiments. Based on XPS and XANES analyses, the enrichment of U(VI) and Eu(III) was attributed to the abundant adsorption sites (e.g., -OH and -COOH groups) of the CNFs. IR analysis further demonstrated that -COOH groups were more responsible for U(VI) adsorption. In addition, the remarkable reducing agents of the R-CH2OH groups were responsible for the highly efficient adsorption of U(VI) on the CNFs. The adsorption mechanism of U(VI) on the CNFs at pH 4.5 was shifted from inner- to outer-sphere surface complexation with increasing initial concentration, whereas the surface (co)precipitate (i.e., schoepite) was observed at pH 7.0 by EXAFS spectra. The findings presented herein play an important role in the removal of radionuclides on inexpensive and available carbon-based nanoparticles in environmental cleanup applications.

  9. Use of the vector index and geographic information system to prospectively inform West Nile virus interventions.

    PubMed

    Jones, Roderick C; Weaver, Kingsley N; Smith, Shamika; Blanco, Claudia; Flores, Cristina; Gibbs, Kevin; Markowski, Daniel; Mutebi, John-Paul

    2011-09-01

    We sought to estimate West Nile virus (WNV) activity in mosquito populations weekly at the census tract level in Chicago, IL, and to provide this information graphically. Each week we calculated a vector index (VI) for each mosquito trap then generated tract estimates using geographic information systems. During June 29-September 13, 2008, a median of 527 (60%) of 874 possible tracts per week had a VI value. Overall, 94% of the weekly VI tract estimates were 0; among those with a VI estimate greater than 0, the median was 0.33 (range 0.003-3.5). Officials deemed risk levels and weather conditions appropriate for adulticide treatments on 3 occasions, resulting in the treatment of approximately 252 linear kilometers of residential streets and alleys. Our analysis successfully converted complex, raw surveillance data into a format that highlighted areas of elevated WNV activity and facilitated the determination of appropriate response procedures.

  10. Study of Laminar Flame 2-D Scalar Values at Various Fuel to Air Ratios Using an Imaging Fourier-Transform Spectrometer and 2-D CFD Analysis

    DTIC Science & Technology

    2013-03-01

    NASA- Glenn’s Chemical Equilibrium with Applications (CEA) program. UNICORN CFD predictions were in excellent agreement with CEA calculations at...49 Appendix A – UNICORN CFD Inputs and Instruction .....................................................50 Appendix B – NASA-Glenn...17 Figure 7: Schematic of UNICORN CFD card setup. ........................................................ 18 Figure 8: Averaged flame

  11. 40 CFR Appendix S to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values..., calculated as specified in section 5 of this appendix. The design values for the primary NAAQS are: (1) The annual mean value for a monitoring site for one year (referred to as the “annual primary standard design...

  12. 40 CFR Appendix S to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values..., calculated as specified in section 5 of this appendix. The design values for the primary NAAQS are: (1) The annual mean value for a monitoring site for one year (referred to as the “annual primary standard design...

  13. 40 CFR Appendix S to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values..., calculated as specified in section 5 of this appendix. The design values for the primary NAAQS are: (1) The annual mean value for a monitoring site for one year (referred to as the “annual primary standard design...

  14. 40 CFR Appendix S to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values..., calculated as specified in section 5 of this appendix. The design values for the primary NAAQS are: (1) The annual mean value for a monitoring site for one year (referred to as the “annual primary standard design...

  15. 40 CFR Appendix S to Part 50 - Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... measured from midnight to midnight (local standard time) that are used in NAAQS computations. Design values..., calculated as specified in section 5 of this appendix. The design values for the primary NAAQS are: (1) The annual mean value for a monitoring site for one year (referred to as the “annual primary standard design...

  16. 47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

  17. 47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

  18. 47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

  19. 47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

  20. 47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

  1. 17 CFR 240.17h-2T - Risk assessment reporting requirements for brokers and dealers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 equal to or... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 of less than..., customers or carries the accounts of or for customers. (3) In calculating capital and subordinated debt for...

  2. 17 CFR 240.17h-2T - Risk assessment reporting requirements for brokers and dealers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 equal to or... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 of less than..., customers or carries the accounts of or for customers. (3) In calculating capital and subordinated debt for...

  3. 17 CFR 240.17h-2T - Risk assessment reporting requirements for brokers and dealers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 equal to or... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 of less than..., customers or carries the accounts of or for customers. (3) In calculating capital and subordinated debt for...

  4. 17 CFR 240.17h-2T - Risk assessment reporting requirements for brokers and dealers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 equal to or... maintains capital including debt subordinated in accordance with appendix D of § 240.15c3-1 of less than..., customers or carries the accounts of or for customers. (3) In calculating capital and subordinated debt for...

  5. Intrinsic Remediation Engineering Evaluation/Cost Analysis for Site SS27/XYZ Dover AFB, Dover, DE

    DTIC Science & Technology

    1996-01-01

    and Output Files APPENDIX F Analytical Models APPENDIX G Costing Worksheets and Present Worth Calculations TABLES No. Title Page 2.1 CPT Activity and...8217 ............................................................... 4-38 _ 4.19 Redox Potential Map for Groundwater ......................................... 4-42 4.20 Vertical Profile of Redox Isopleths for...Groundwater Cross-Section C-C ’. ............................................................... 4-43 4.21 Vertical Profile of Redox Isopleths for

  6. 10 CFR Appendix G to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Unvented Home Heating Equipment

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. G Appendix G to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... energy consumption for primary electric heaters. For primary electric heaters, calculate the annual...

  7. Transport of chromium and selenium in the suboxic zone of a shallow aquifer: Influence of redox and adsorption reactions

    USGS Publications Warehouse

    Kent, D.B.; Davis, J.A.; Anderson, L.C.D.; Rea, B.A.; Waite, T.D.

    1994-01-01

    Breakthrough of Cr(VI) (chromate), Se(VI) (selenate), and O2 (dissolved oxygen) was observed in tracer tests conducted in a shallow, sand and gravel aquifer with mildly reducing conditions. Loss of Cr, probably due to reduction of Cr(VI) to Cr(III) and irreversible sorption of Cr(III), occurred along with slight retardation of Cr(VI), owing to reversible sorption. Reduction of Se(VI) and O2 was thermodynamically feasible but did not occur, indicating conditions, were unfavorable to microbial reduction. Cr(VI) reduction by constituents of aquifer sediments did not achieve local equilibrium during transport. The reduction rate was probably limited by incomplete contact between Cr(VI) transported along predominant flow paths and reductants located in regions within aquifer sediments of comparatively low permeability. Scatter in the amount of Cr reduction calculated from individual breakthrough curves at identical distances downgradient probably resulted from heterogeneities in the distribution of reductants in the sediments. Predictive modeling of the transport and fate of redox-sensitive solutes cannot be based strictly on thermodynamic considerations; knowledge of reaction rates is critical. Potentially important mass transfer rate limitations between solutes and reactants in sediments as well as heterogeneities in the distribution of redox properties in aquifers complicate determination of limiting rates for use in predictive simulations of the transport of redox-sensitive contaminants in groundwater.

  8. Single, simultaneous and consecutive biosorption of Cr(VI) and Orange II onto chemically modified masau stones.

    PubMed

    Albadarin, Ahmad B; Solomon, Samuel; Kurniawan, Tonni Agustiono; Mangwandi, Chirangano; Walker, Gavin

    2017-12-15

    Novel and low cost chemically modified masau stone (CMMS) was investigated for its biosorption of an anionic azo dye, Orange II (OII), and toxic hexavalent chromium (Cr(VI)) from aqueous systems: individually, simultaneously and consecutively. XPS and FTIR analyses indicated the introduction of quaternary-Nitrogen to the CMMS surface after activation with epichlorohydrin (etherifying agent) and diethylenetriamine (crosslinking agent). The effects of pH, contact time and initial concentration (C o ), and loading order on mechanisms of biosorption/reduction of OII and Cr(VI) onto CMMS were examined in detail. Several analytical techniques were employed to characterise the physio-chemical properties of the CMMS and determine the biosorption mechanisms. The pseudo second order and redox models were able to adequately predict the kinetics of biosorption. The Langmuir maximum OII biosorption capacity (q max ) was calculated as 136.8 mg/g for the dye onto the Cr(VI)-loaded CMMS consecutive system at C o  = 100 mg/dm 3 . The q max for the Cr(VI) system was found to be 87.32 mg/g at the same C o max. This reveals that the biosorption of OII and Cr(VI) mainly takes place via two different mechanisms i.e. hydrogen bonding and electrostatic attraction for the dye, and biosorption-coupled reduction for Cr(VI). Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Higher adsorption capacity of Spirulina platensis alga for Cr(VI) ions removal: parameter optimisation, equilibrium, kinetic and thermodynamic predictions.

    PubMed

    Gunasundari, Elumalai; Senthil Kumar, Ponnusamy

    2017-04-01

    This study discusses about the biosorption of Cr(VI) ion from aqueous solution using ultrasonic assisted Spirulina platensis (UASP). The prepared UASP biosorbent was characterised by Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmet-Teller, scanning electron spectroscopy and energy dispersive X-ray and thermogravimetric analyses. The optimum condition for the maximum removal of Cr(VI) ions for an initial concentration of 50 mg/l by UASP was measured as: adsorbent dose of 1 g/l, pH of 3.0, contact time of 30 min and temperature of 303 K. Adsorption isotherm, kinetics and thermodynamic parameters were calculated. Freundlich model provided the best results for the removal of Cr(VI) ions by UASP. The adsorption kinetics of Cr(VI) ions onto UASP showed that the pseudo-first-order model was well in line with the experimental data. In the thermodynamic study, the parameters like Gibb's free energy, enthalpy and entropy changes were evaluated. This result explains that the adsorption of Cr(VI) ions onto the UASP was exothermic and spontaneous in nature. Desorption of the biosorbent was done using different desorbing agents in which NaOH gave the best result. The prepared material showed higher affinity for the removal of Cr(VI) ions and this may be an alternative material to the existing commercial adsorbents.

  10. 40 CFR Appendix IV to Part 265 - Tests for Significance

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... introductory statistics texts. ... student's t-test involves calculation of the value of a t-statistic for each comparison of the mean... parameter with its initial background concentration or value. The calculated value of the t-statistic must...

  11. QCD as a Theory of Hadrons

    NASA Astrophysics Data System (ADS)

    Narison, Stephan

    2004-05-01

    About Stephan Narison; Outline of the book; Preface; Acknowledgements; Part I. General Introduction: 1. A short flash on particle physics; 2. The pre-QCD era; 3. The QCD story; 4. Field theory ingredients; Part II. QCD Gauge Theory: 5. Lagrangian and gauge invariance; 6. Quantization using path integral; 7. QCD and its global invariance; Part III. MS scheme for QCD and QED: Introduction; 8. Dimensional regularization; 9. The MS renormalization scheme; 10. Renormalization of operators using the background field method; 11. The renormalization group; 12. Other renormalization schemes; 13. MS scheme for QED; 14. High-precision low-energy QED tests; Part IV. Deep Inelastic Scattering at Hadron Colliders: 15. OPE for deep inelastic scattering; 16. Unpolarized lepton-hadron scattering; 17. The Altarelli-Parisi equation; 18. More on unpolarized deep inelastic scatterings; 19. Polarized deep-inelastic processes; 20. Drell-Yan process; 21. One 'prompt photon' inclusive production; Part V. Hard Processes in e+e- Collisions: Introduction; 22. One hadron inclusive production; 23. gg scatterings and the 'spin' of the photon; 24. QCD jets; 25. Total inclusive hadron productions; Part VI. Summary of QCD Tests and as Measurements; Part VII. Power Corrections in QCD: 26. Introduction; 27. The SVZ expansion; 28. Technologies for evaluating Wilson coefficients; 29. Renormalons; 30. Beyond the SVZ expansion; Part VIII. QCD Two-Point Functions: 31. References guide to original works; 32. (Pseudo)scalar correlators; 33. (Axial-)vector two-point functions; 34. Tensor-quark correlator; 35. Baryonic correlators; 36. Four-quark correlators; 37. Gluonia correlators; 38. Hybrid correlators; 39. Correlators in x-space; Part IX. QCD Non-Perturbative Methods: 40. Introduction; 41. Lattice gauge theory; 42. Chiral perturbation theory; 43. Models of the QCD effective action; 44. Heavy quark effective theory; 45. Potential approaches to quarkonia; 46. On monopole and confinement; Part X. QCD Spectral Sum Rules: 47. Introduction; 48. Theoretical foundations; 49. Survey of QCD spectral sum rules; 50. Weinberg and DMO sum rules; 51. The QCD coupling as; 52. The QCD condensates; 53. Light and heavy quark masses, etc.; 54. Hadron spectroscopy; 55. D, B and Bc exclusive weak decays; 56. B0(s)-B0(s) mixing, kaon CP violation; 57. Thermal behaviour of QCD; 58. More on spectral sum rules; Part XI. Appendix A: physical constants and unites; Appendix B: weight factors for SU(N)c; Appendix C: coordinates and momenta; Appendix D: Dirac equation and matrices; Appendix E: Feynman rules; Appendix F: Feynman integrals; Appendix G: useful formulae for the sum rules; Bibliography; Index.

  12. QCD as a Theory of Hadrons

    NASA Astrophysics Data System (ADS)

    Narison, Stephan

    2007-07-01

    About Stephan Narison; Outline of the book; Preface; Acknowledgements; Part I. General Introduction: 1. A short flash on particle physics; 2. The pre-QCD era; 3. The QCD story; 4. Field theory ingredients; Part II. QCD Gauge Theory: 5. Lagrangian and gauge invariance; 6. Quantization using path integral; 7. QCD and its global invariance; Part III. MS scheme for QCD and QED: Introduction; 8. Dimensional regularization; 9. The MS renormalization scheme; 10. Renormalization of operators using the background field method; 11. The renormalization group; 12. Other renormalization schemes; 13. MS scheme for QED; 14. High-precision low-energy QED tests; Part IV. Deep Inelastic Scattering at Hadron Colliders: 15. OPE for deep inelastic scattering; 16. Unpolarized lepton-hadron scattering; 17. The Altarelli-Parisi equation; 18. More on unpolarized deep inelastic scatterings; 19. Polarized deep-inelastic processes; 20. Drell-Yan process; 21. One 'prompt photon' inclusive production; Part V. Hard Processes in e+e- Collisions: Introduction; 22. One hadron inclusive production; 23. gg scatterings and the 'spin' of the photon; 24. QCD jets; 25. Total inclusive hadron productions; Part VI. Summary of QCD Tests and as Measurements; Part VII. Power Corrections in QCD: 26. Introduction; 27. The SVZ expansion; 28. Technologies for evaluating Wilson coefficients; 29. Renormalons; 30. Beyond the SVZ expansion; Part VIII. QCD Two-Point Functions: 31. References guide to original works; 32. (Pseudo)scalar correlators; 33. (Axial-)vector two-point functions; 34. Tensor-quark correlator; 35. Baryonic correlators; 36. Four-quark correlators; 37. Gluonia correlators; 38. Hybrid correlators; 39. Correlators in x-space; Part IX. QCD Non-Perturbative Methods: 40. Introduction; 41. Lattice gauge theory; 42. Chiral perturbation theory; 43. Models of the QCD effective action; 44. Heavy quark effective theory; 45. Potential approaches to quarkonia; 46. On monopole and confinement; Part X. QCD Spectral Sum Rules: 47. Introduction; 48. Theoretical foundations; 49. Survey of QCD spectral sum rules; 50. Weinberg and DMO sum rules; 51. The QCD coupling as; 52. The QCD condensates; 53. Light and heavy quark masses, etc.; 54. Hadron spectroscopy; 55. D, B and Bc exclusive weak decays; 56. B0(s)-B0(s) mixing, kaon CP violation; 57. Thermal behaviour of QCD; 58. More on spectral sum rules; Part XI. Appendix A: physical constants and unites; Appendix B: weight factors for SU(N)c; Appendix C: coordinates and momenta; Appendix D: Dirac equation and matrices; Appendix E: Feynman rules; Appendix F: Feynman integrals; Appendix G: useful formulae for the sum rules; Bibliography; Index.

  13. Analysis of benchmark critical experiments with ENDF/B-VI data sets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hardy, J. Jr.; Kahler, A.C.

    1991-12-31

    Several clean critical experiments were analyzed with ENDF/B-VI data to assess the adequacy of the data for U{sup 235}, U{sup 238} and oxygen. These experiments were (1) a set of homogeneous U{sup 235}-H{sub 2}O assemblies spanning a wide range of hydrogen/uranium ratio, and (2) TRX-1, a simple, H{sub 2}O-moderated Bettis lattice of slightly-enriched uranium metal rods. The analyses used the Monte Carlo program RCP01, with explicit three-dimensional geometry and detailed representation of cross sections. For the homogeneous criticals, calculated k{sub crit} values for large, thermal assemblies show good agreement with experiment. This supports the evaluated thermal criticality parameters for U{supmore » 235}. However, for assemblies with smaller H/U ratios, k{sub crit} values increase significantly with increasing leakage and flux-spectrum hardness. These trends suggest that leakage is underpredicted and that the resonance eta of the ENDF/B-VI U{sup 235} is too large. For TRX-1, reasonably good agreement is found with measured lattice parameters (reaction-rate ratios). Of primary interest is rho28, the ratio of above-thermal to thermal U{sup 238} capture. Calculated rho28 is 2.3 ({+-} 1.7) % above measurement, suggesting that U{sup 238} resonance capture remains slightly overpredicted with ENDF/B-VI. However, agreement is better than observed with earlier versions of ENDF/B.« less

  14. Covalently bonded ionic liquid onto cellulose for fast adsorption and efficient separation of Cr(VI): Batch, column and mechanism investigation.

    PubMed

    Dong, Zhen; Zhao, Long

    2018-06-01

    Combining the advantages of both cellulose and ionic liquid, ionic liquid functionalized cellulose (ILFC) as adsorbent was prepared through radiation grafting glycidyl methacrylate onto cellulose microsphere following by reaction with ionic liquid 1-aminopropyl-3-methyl imidazolium nitrate. Its adsorption properties towards Cr(VI) were investigated in batch and column experiments. In batch experiments, the adsorption kinetics was well fitted with pseudo-second-order mode with equilibrium time of 2 h and the adsorption capacity reached 181.8 mg/g at pH 2 calculated from Langmuir model. In fixed column, both Yoon-Nelson and Thomas models gave satisfactory fit to experimental data and breakthrough curves, and equilibrium adsorption capacity calculated by Thomas model was 161.0 mg/g. Moreover, ILFC exhibited high selectivity towards Cr(VI) even in synthetic chrome-plating wastewater. Besides, adsorption/desorption test revealed ILFC can be regenerated and reused several times without obvious decrease in adsorbed amount. The adsorption process was demonstrated to anion exchange-reduction mechanism via XPS analysis. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Hexavalent chromium emissions from aerospace operations: A case study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chaurushia, A.; Bajza, C.

    1994-12-31

    Northrop Aircraft Division (NAD) is subject to several air toxic regulations such as EPA SARA Title 3, California Assembly Bill 2588 (AB2588), and Proposition 65 and is a voluntary participant in air toxic emissions reduction programs such as the EPA 33/50 and MERIT Program. To quantify emissions, NAD initially followed regulatory guidelines which recommend that emission inventories of air toxics be based on engineering assumptions and conservative emission factors in absence of specific source test data. NAD was concerned that Chromium VI emissions from NAD`s spray coating and chemical tank line operations were not representative due to these techniques. Moremore » recently, NAD has relied upon information from its ongoing source testing program to determine emission rates of Chromium VI. Based on these source test results, NAD revised emission calculations for use in Chromium VI inventories, impact assessments and control strategies. NAD has been successful in demonstrating a significant difference between emissions calculated utilizing the source test results and emissions based on the traditional mass balance using agency suggested methods.« less

  16. A first principles investigation of electron transfer between Fe(II) and U(VI) on insulating Al- vs. semiconducting Fe-oxide surfaces via the proximity effect

    NASA Astrophysics Data System (ADS)

    Taylor, S. D.; Marcano, M. C.; Becker, U.

    2017-01-01

    This study investigates how the intrinsic chemical and electronic properties of mineral surfaces and their associated electron transfer (ET) pathways influence the reduction of U(VI) by surface-associated Fe(II). Density functional theory (DFT), including the Hubbard U correction to the exchange-correlation functional, was used to investigate sorption/redox reactions and ET mechanisms between Fe(II) and U(VI) coadsorbed on isostructural, periodic (0 0 1) surfaces of the insulator corundum (α-Al2O3) vs. the semiconductor hematite (α-Fe2O3). Furthermore, the coadsorbed Fe(II) and U(VI) ions are spatially separated from one another on the surfaces (⩾5.9 Å) to observe whether electronic-coupling through the semiconducting hematite surface facilitates ET between the adsorbates, a phenomenon known as the proximity effect. The calculations show that the different chemical and electronic properties between the isostructural corundum and hematite (0 0 1) surfaces lead to considerably different ET mechanisms between Fe(II) and U(VI). ET on the insulating corundum (0 0 1) surface is limited by the adsorbates' structural configuration. When Fe(II) and U(VI) are spatially separated and do not directly interact with one another (e.g. via an inner-sphere complex), U(VI) reduction by Fe(II) cannot occur as there is no physical pathway enabling ET between the adsorbates. In contrast to the insulating corundum (0 0 1) surface, the hematite (0 0 1) surface can potentially participate in ET reactions due to the high number of electron acceptor sites from the Fe d-states near the Fermi level at the hematite surface. The adsorption of Fe(II) also introduces d-states near the Fermi level as well as shifts unoccupied d-states of the Fe cations at the hematite surface to lower energies, making the surface more conductive. In turn, electronic coupling through the surface can link the spatially separated adsorbates to one another and provide distinct ET pathways for an electron from Fe(II) to travel through the hematite surface and reach U(VI). The progression and extent of ET occurring on the semiconducting hematite (0 0 1) surface via the proximity effect depends on the electronic properties of the surface. ET between the spatially separated U(VI) and Fe(II) occurs most readily when orbitals between the Fe and U adsorbates overlap with those of neighboring O and Fe ions at the hematite surface, as shown by calculations without the Hubbard U correction. Analyses of the spins densities confirm that the U and Fe adsorbates were reduced and oxidized, respectively, (acquiring 0.33 μB and 0.11-0.20 μB, respectively), while Fe cations at the hematite surface were reduced (losing ⩽0.6 μB). If electrons are highly localized, the amount of orbital mixing and electronic coupling through the hematite surface decreases and in turn leads to a lower degree of spin transfer, as predicted by calculations with the Hubbard U correction. Thus, the proximity effect is a potential mechanism on semiconducting surfaces facilitating surface-mediated redox reactions, although its significance varies depending on the electronic properties and subsequent charge-carrying ability of the surface. These results provide insight into ET pathways and mechanisms on insulating Al- and semiconducting Fe oxide surfaces influencing the reduction U(VI) by Fe(II) that may subsequently limit uranium's transport in the subsurface.

  17. Design guidelines for wind-resistant structures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDonald, J.R.; Mehta, K.C.; Minor, J.E.

    1975-06-01

    The purpose of this document is to prescribe criteria and to provide guidance for professional personnel who are involved in the design and evaluation of buildings and structures to resist tornadoes and extreme winds at the Oak Ridge, Tennessee, Portsmouth, Ohio, and Paducah, Kentucky, Plant Sites. The scope of the document covers loads due to extreme winds and tornadoes. Other loading conditions such as dead, live, or earthquake loads shall be considered as prescribed by the Union Carbide Corporation. In Section II the method for determining the maximum design windspeed for any specified level of risk is described. The straightmore » wind and tornado parameters are then deduced from the value of maximum design windspeed. The three types of tornado and extreme wind loads (aerodynamic, atmospheric pressure change and missiles) are treated in Sections III, IV, and V, respectively. Appropriate load combinations are defined in Section VI. The final section contains several examples showing how the design guidelines are used to determine appropriate design wind pressures. A description of the computer program used to predict missile accelerations, velocities and trajectories is contained in Appendix A. Additional design examples are provided in Appendix B.« less

  18. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Joseph, Claudia; Mibus, Jens; Trepte, Paul

    As a contribution to the safety assessment of nuclear waste repositories, U(VI) diffusion through the potential buffer material MX-80 bentonite was investigated at three clay dry densities over six years. Synthetic MX-80 model pore water was used as background electrolyte. Speciation calculations showed that Ca 2UO 2(CO 3) 3(aq) was the main U(VI) species. The in- and out-diffusion of U(VI) was investigated separately. U(VI) diffused about 3 mm, 1.5 mm, and 1 mm into the clay plug at ρ = 1.3, 1.6, and 1.9 g/cm 3, respectively. No through-diffusion of the U(VI) tracer was observed. However, leaching of natural uraniummore » contained in the clay occurred and uranium was detected in all receiving reservoirs. As expected, the effective and apparent diffusion coefficients, D e and D a, decreased with increasing dry density. The D a values for the out-diffusion of natural U(VI) were in good agreement with previously determined values. Surprisingly, D a values for the in-diffusion of U(VI) were about two orders of magnitude lower than values obtained in short-term in-diffusion experiments reported in the literature. Some potential reasons for this behavior that were evaluated are changes of the U(VI) speciation within the clay (precipitation, reduction) or changes of the clay porosity and pore connectivity with time. By applying Archie's law and the extended Archie's law, it was estimated that a significantly smaller effective porosity must be present for the long-term in-diffusion of U(VI). Finally, the results suggest that long-term studies of key transport phenomena may reveal additional processes that can directly impact long-term repository safety assessments.« less

  19. Organic and Aqueous Redox Speciation of Cu(III) Periodate Oxidized Transuranium Actinides

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McCann, Kevin; Sinkov, Sergey I.; Lumetta, Gregg J.

    A hexavalent group actinide separation process could streamline used nuclear fuel recycle and waste management. The limiting factor to such a process compatible with current fuel dissolution practices is obtaining and maintaining hexavalent Am, in molar nitric acid due to the high reduction potential of the Am(VI)/Am(III) couple (1.68 V vs SCE). Two strong oxidants, sodium bismuthate and Cu(III) periodate, have demonstrated quantitative oxidation of Am under molar acid conditions and better than 50% recovery by diamyl amylphosphonate (DAAP) is possible under these same conditions. This work considers the use of Cu(III) periodate to oxidize Np(V) to Np(VI) and Pu(IV)more » to Pu(VI) and recover these elements by extraction with DAAP. A metal:oxidant ratio of 1:1.2 and 1:3 was necessary to quantitatively oxidize Np(V) and Pu(IV), respectively, to the hexavalent state. Extraction of hexavalent Np, Pu, and Am by 1 M DAAP in n-dodecane was measured using UV-Vis [Pu(VI), Am (VI)] and NIR [Np(VI)]. Distribution values of Am(VI) were found to match previous tracer level studies. The organic phase spectra of Np, Pu, and Am are presented and molar absorptivities are calculated for characteristic peaks. Hexavalent Pu was found to be stable in the organic phase while Np(VI) showed some reduction to Np(V) and Am was present as Am(III), Am(V), and Am(VI) species in aqueous and organic phases during the extraction experiments. These results demonstrate, for the first time, the ability to recover macroscopic amounts of americium that would be present during fuel reprocessing and are the first characterization of Am organic phase oxidation state speciation relevant to a hexavalent group actinide separation process under acidic conditions.« less

  20. Synthesis, characterization and application of Lagerstroemia speciosa embedded magnetic nanoparticle for Cr(VI) adsorption from aqueous solution.

    PubMed

    Srivastava, Shalini; Agrawal, Shashi Bhushan; Mondal, Monoj Kumar

    2017-05-01

    Lagerstroemia speciosa bark (LB) embedded magnetic nanoparticles were prepared by co-precipitation of Fe 2+ and Fe 3+ salt solution with ammonia and LB for Cr(VI) removal from aqueous solution. The native LB, magnetic nanoparticle (MNP), L. speciosa embedded magnetic nanoparticle (MNPLB) and Cr(VI) adsorbed MNPLB particles were characterized by SEM-EDX, TEM, BET-surface area, FT-IR, XRD and TGA methods. TEM analysis confirmed nearly spherical shape of MNP with an average diameter of 8.76nm and the surface modification did not result in the phase change of MNP as established by XRD analysis, while led to the formation of secondary particles of MNPLB with diameter of 18.54nm. Characterization results revealed covalent binding between the hydroxyl group of MNP and carboxyl group of LB particles and further confirmed its physico-chemical nature favorable for Cr(VI) adsorption. The Cr(VI) adsorption on to MNPLB particle as an adsorbent was tested under different contact time, initial Cr(VI) concentration, adsorbent dose, initial pH, temperature and agitation speed. The results of the equilibrium and kinetics of adsorption were well described by Langmuir isotherm and pseudo-second-order model, respectively. The thermodynamic parameters suggest spontaneous and endothermic nature of Cr(VI) adsorption onto MNPLB. The maximum adsorption capacity for MNPLB was calculated to be 434.78mg/g and these particles even after Cr(VI) adsorption were collected effortlessly from the aqueous solution by a magnet. The desorption of Cr(VI)-adsorbed MNPLB was found to be more than 93.72% with spent MNPLB depicting eleven successive adsorption-desorption cycles. Copyright © 2016. Published by Elsevier B.V.

  1. 40 CFR 600.113-93 - Fuel economy calculations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... calculations of the weighted fuel economy values require input of the weighted grams/mile values for total... this section. A sample appears in appendix II to this part. (a) Calculate the weighted grams/mile... the grams/mile values for the highway fuel economy test for HC, CO and CO2, and where applicable CH3...

  2. 12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... stepped interest rates, and to certain time accounts with a stated maturity greater than one year. A... calculated by the formula shown below. Institutions shall calculate the annual percentage yield based on the... determining the total interest figure to be used in the formula, institutions shall assume that all principal...

  3. 12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... stepped interest rates, and to certain time accounts with a stated maturity greater than one year. A... calculated by the formula shown below. Institutions shall calculate the annual percentage yield based on the... determining the total interest figure to be used in the formula, institutions shall assume that all principal...

  4. 12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... stepped interest rates, and to certain time accounts with a stated maturity greater than one year. A... calculated by the formula shown below. Institutions shall calculate the annual percentage yield based on the... determining the total interest figure to be used in the formula, institutions shall assume that all principal...

  5. 31 CFR Appendix A to Part 359 - Redemption Value Calculations

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... book-entry Series I savings bonds redemption value calculation? Assume a New Treasury Direct par investment amount in a book-entry Series I savings bonds of $34.59, with an issue date of May, 2001, and a..., 2001 and redeemed December, 2001 = $101.96. Calculation: [(Book-entry par investment) ÷ (100)] × CRV...

  6. Water-soluble Schiff base-actinyl complexes and their effect on the solvent extraction of f-elements

    DOE PAGES

    Hawkins, Cory A.; Bustillos, Christian G.; May, Iain; ...

    2016-09-07

    Conventional solvent extraction of selected f-element cations by bis(2-ethylhexyl)phosphoric acid (HDEHP) yields increased extraction from aqueous to organic solution along the series Np(V) < Cm(III) < Eu(III) < U(VI), with distribution ratios all within two orders of magnitude. However, in the presence of the water-soluble tetradentate Schiff base (N,N'-bis(5-sulfonatosalicylidene)-ethylenediamine or H 2salenSO 3), selective complexation of the two actinyl cations (Np(V) and U(VI)) resulted in an extraction order of Np(V) < U(VI) << Eu(III) < Cm(III). The extraction of neither Cm(III) or Eu(III) by HDEHP are significantly impacted by the presence of the aqueous phase Schiff base. Despite observed hydrolyticmore » decomposition of H 2salenSO 3 in aqueous solutions, the calculated high conditional stability constant (β 11 = 26) for the complex [UO 2(salenSO 3)] 2- demonstrates its capacity for aqueous hold-back of U(VI). UV-visible-NIR spectroscopy of solutions prepared with a Np(VI) stock and H 2salenSO 3 suggest that reduction of Np(VI) to Np(V) by the ligand was rapid, resulting in a pentavalent Np complex that was substantially retained in the aqueous phase. Lastly, results from 1H NMR of aqueous solutions of H 2salenSO 3 with U(VI) and La(III), Eu(III), and Lu(III) provides additional evidence that the ligand readily chelates U(VI), but has only weak interactions with trivalent lanthanide ions.« less

  7. Offsite Radiological Consequence Analysis for the Bounding Flammable Gas Accident

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    CARRO, C.A.

    2003-07-30

    This document quantifies the offsite radiological consequences of the bounding flammable gas accident for comparison with the 25 rem Evaluation Guideline established in DOE-STD-3009, Appendix A. The bounding flammable gas accident is a detonation in a single-shell tank The calculation applies reasonably conservation input parameters in accordance with DOE-STD-3009, Appendix A, guidance. Revision 1 incorporates comments received from Office of River Protection.

  8. 40 CFR Appendix B to Part 136 - Definition and Procedure for the Determination of the Method Detection Limit-Revision 1.11

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... calculated method detection limit. To insure that the estimate of the method detection limit is a good...) where: MDL = the method detection limit t(n-1,1- α=.99) = the students' t value appropriate for a 99... Determination of the Method Detection Limit-Revision 1.11 B Appendix B to Part 136 Protection of Environment...

  9. 40 CFR 63.525 - Compliance and performance testing.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... using Method 2A or 2D to determine flow rate. (ii) Method 2, 2A, 2C or 2D of 40 CFR part 60, appendix A... vapor displacement due to transfer of material into or out of the reactor shall be calculated according... or 2D. (ii) Method 2,2A, 2C or 2D of 40 CFR part 60, appendix A, as appropriate, shall be used for...

  10. 40 CFR 63.525 - Compliance and performance testing.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... using Method 2A or 2D to determine flow rate. (ii) Method 2, 2A, 2C or 2D of 40 CFR part 60, appendix A... vapor displacement due to transfer of material into or out of the reactor shall be calculated according... or 2D. (ii) Method 2,2A, 2C or 2D of 40 CFR part 60, appendix A, as appropriate, shall be used for...

  11. 40 CFR 63.525 - Compliance and performance testing.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... using Method 2A or 2D to determine flow rate. (ii) Method 2, 2A, 2C or 2D of 40 CFR part 60, appendix A... vapor displacement due to transfer of material into or out of the reactor shall be calculated according... or 2D. (ii) Method 2,2A, 2C or 2D of 40 CFR part 60, appendix A, as appropriate, shall be used for...

  12. 40 CFR 63.525 - Compliance and performance testing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... using Method 2A or 2D to determine flow rate. (ii) Method 2, 2A, 2C or 2D of 40 CFR part 60, appendix A... vapor displacement due to transfer of material into or out of the reactor shall be calculated according... or 2D. (ii) Method 2,2A, 2C or 2D of 40 CFR part 60, appendix A, as appropriate, shall be used for...

  13. Comparison of in situ uranium KD values with a laboratory determined surface complexation model

    USGS Publications Warehouse

    Curtis, G.P.; Fox, P.; Kohler, M.; Davis, J.A.

    2004-01-01

    Reactive solute transport simulations in groundwater require a large number of parameters to describe hydrologic and chemical reaction processes. Appropriate methods for determining chemical reaction parameters required for reactive solute transport simulations are still under investigation. This work compares U(VI) distribution coefficients (i.e. KD values) measured under field conditions with KD values calculated from a surface complexation model developed in the laboratory. Field studies were conducted in an alluvial aquifer at a former U mill tailings site near the town of Naturita, CO, USA, by suspending approximately 10 g samples of Naturita aquifer background sediments (NABS) in 17-5.1-cm diameter wells for periods of 3 to 15 months. Adsorbed U(VI) on these samples was determined by extraction with a pH 9.45 NaHCO3/Na2CO3 solution. In wells where the chemical conditions in groundwater were nearly constant, adsorbed U concentrations for samples taken after 3 months of exposure to groundwater were indistinguishable from samples taken after 15 months. Measured in situ K D values calculated from the measurements of adsorbed and dissolved U(VI) ranged from 0.50 to 10.6 mL/g and the KD values decreased with increasing groundwater alkalinity, consistent with increased formation of soluble U(VI)-carbonate complexes at higher alkalinities. The in situ K D values were compared with KD values predicted from a surface complexation model (SCM) developed under laboratory conditions in a separate study. A good agreement between the predicted and measured in situ KD values was observed. The demonstration that the laboratory derived SCM can predict U(VI) adsorption in the field provides a critical independent test of a submodel used in a reactive transport model. ?? 2004 Elsevier Ltd. All rights reserved.

  14. TIM Version 3.0 beta Technical Description and User Guide - Appendix F - Approach for Calculating Juvenile Dietary Exposure

    EPA Pesticide Factsheets

    Use the available information on the relationship between juvenile body weights and energetic requirements to develop a general approach for calculating juvenile dietary exposure doses appropriate for a range of avian species.

  15. The Funnel Geometry of Open Flux Tubes in the Low Solar Corona Constrained by O VI and Ne VIII Outflow

    NASA Technical Reports Server (NTRS)

    Byhring, Hanne S.; Esser, Ruth; Lie-Svendsen, Oystein

    2008-01-01

    Model calculations show that observed outflow velocities of order 7-10 km/s of C IV and O VI ions, and 15-20 km/s of Ne VIII ions, are not only consistent with models of the solar wind from coronas holes, but also place unique constraints on the degree of flow tube expansion as well as the location of the expansion in the transition region/lower corona.

  16. Columbia-North Pacific Region Comprehensive Framework Study of Water and Related Lands. Appendix VI. Economic Base and Projections,

    DTIC Science & Technology

    1971-01-01

    with secondary concen t r a t i on in Subreg ions 5 arid 6. The value of production of these crops was about $85 m i l l i o n in 1 1 13 . Dry ...and tile a dj a c en t p o r t i o n of Idaho ‘ north of the Snake Ri’ er. Production of dry field peas is ce n te r e d in t h e I w i n Falls...of dry be ins and peas we re produced and their value exceeded $34 million. The production of livestock and livestock products and p o u l t ry and

  17. 40 CFR Appendix Vi to Part 1039 - Nonroad Compression-ignition Composite Transient Cycle

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 78 61 311 78 46 312 66 65 313 78 97 314 84 63 315 57 26 316 36 22 317 20 34 318 19 8 319 9 10 320 5 5... 0 8 0 0 9 0 0 10 0 0 11 0 0 12 0 0 13 0 0 14 0 0 15 0 0 16 0 0 17 0 0 18 0 0 19 0 0 20 0 0 21 0 0 22... 23 1 59 1 3 60 1 8 61 1 3 62 1 5 63 1 6 64 1 4 65 1 4 66 0 6 67 1 4 68 9 21 69 25 56 70 64 26 71 60...

  18. 40 CFR Appendix Vi to Part 1039 - Nonroad Compression-ignition Composite Transient Cycle

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 78 61 311 78 46 312 66 65 313 78 97 314 84 63 315 57 26 316 36 22 317 20 34 318 19 8 319 9 10 320 5 5... 0 8 0 0 9 0 0 10 0 0 11 0 0 12 0 0 13 0 0 14 0 0 15 0 0 16 0 0 17 0 0 18 0 0 19 0 0 20 0 0 21 0 0 22... 23 1 59 1 3 60 1 8 61 1 3 62 1 5 63 1 6 64 1 4 65 1 4 66 0 6 67 1 4 68 9 21 69 25 56 70 64 26 71 60...

  19. 40 CFR Appendix Vi to Part 1039 - Nonroad Compression-ignition Composite Transient Cycle

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 78 61 311 78 46 312 66 65 313 78 97 314 84 63 315 57 26 316 36 22 317 20 34 318 19 8 319 9 10 320 5 5... 0 8 0 0 9 0 0 10 0 0 11 0 0 12 0 0 13 0 0 14 0 0 15 0 0 16 0 0 17 0 0 18 0 0 19 0 0 20 0 0 21 0 0 22... 23 1 59 1 3 60 1 8 61 1 3 62 1 5 63 1 6 64 1 4 65 1 4 66 0 6 67 1 4 68 9 21 69 25 56 70 64 26 71 60...

  20. 40 CFR Appendix Vi to Part 1039 - Nonroad Compression-ignition Composite Transient Cycle

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 78 61 311 78 46 312 66 65 313 78 97 314 84 63 315 57 26 316 36 22 317 20 34 318 19 8 319 9 10 320 5 5... 0 8 0 0 9 0 0 10 0 0 11 0 0 12 0 0 13 0 0 14 0 0 15 0 0 16 0 0 17 0 0 18 0 0 19 0 0 20 0 0 21 0 0 22... 23 1 59 1 3 60 1 8 61 1 3 62 1 5 63 1 6 64 1 4 65 1 4 66 0 6 67 1 4 68 9 21 69 25 56 70 64 26 71 60...

  1. Oxidation of indometacin by ferrate (VI): kinetics, degradation pathways, and toxicity assessment.

    PubMed

    Huang, Junlei; Wang, Yahui; Liu, Guoguang; Chen, Ping; Wang, Fengliang; Ma, Jingshuai; Li, Fuhua; Liu, Haijin; Lv, Wenying

    2017-04-01

    The oxidation of indometacin (IDM) by ferrate(VI) (Fe(VI)) was investigated to determine the reaction kinetics, transformation products, and changes in toxicity. The reaction between IDM and Fe(VI) followed first-order kinetics with respect to each reactant. The apparent second-order rate constants (k app ) decreased from 9.35 to 6.52 M -1  s -1 , as the pH of the solution increased from 7.0 to 10.0. The pH dependence of k app might be well explained by considering the species-specific rate constants of the reactions of IDM with Fe(VI). Detailed product studies using liquid chromatography-tandem mass spectrometry (LC-MS/MS) indicated that the oxidation products were primarily derived from the hydrolysis of amide linkages, the addition of hydroxyl groups, and electrophilic oxidation. The toxicity of the oxidation products was evaluated using the Microtox test, which indicated that transformation products exhibited less toxicity to the Vibrio fischeri bacteria. Quantitative structure-activity relationship (QSAR) analysis calculated by the ecological structure activity relationship (ECOSAR) revealed that all of the identified products exhibited lower acute and chronic toxicity than the parent pharmaceutical for fish, daphnid, and green algae. Furthermore, Fe(VI) was effective in the degradation IDM in water containing carbonate ions or fulvic acid (FA), and in lake water samples; however, higher Fe(VI) dosages would be required to completely remove IDM in lake water in contrast to deionized water.

  2. 31 CFR Appendix A to Part 359 - Redemption Value Calculations

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false Redemption Value Calculations A... of a State, except for estate or inheritance taxes. (See 31 U.S.C. 3124.) 2. What is an example of a book-entry Series I savings bonds redemption value calculation? Assume a New Treasury Direct par...

  3. 31 CFR Appendix A to Part 359 - Redemption Value Calculations

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false Redemption Value Calculations A... of a State, except for estate or inheritance taxes. (See 31 U.S.C. 3124.) 2. What is an example of a book-entry Series I savings bonds redemption value calculation? Assume a New Treasury Direct par...

  4. 31 CFR Appendix A to Part 359 - Redemption Value Calculations

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false Redemption Value Calculations A... of a State, except for estate or inheritance taxes. (See 31 U.S.C. 3124.) 2. What is an example of a book-entry Series I savings bonds redemption value calculation? Assume a New Treasury Direct par...

  5. 31 CFR Appendix A to Part 359 - Redemption Value Calculations

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false Redemption Value Calculations A... of a State, except for estate or inheritance taxes. (See 31 U.S.C. 3124.) 2. What is an example of a book-entry Series I savings bonds redemption value calculation? Assume a New Treasury Direct par...

  6. 40 CFR 75.83 - Calculation of Hg mass emissions and heat input rate.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... heat input rate. 75.83 Section 75.83 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Calculation of Hg mass emissions and heat input rate. The owner or operator shall calculate Hg mass emissions and heat input rate in accordance with the procedures in sections 9.1 through 9.3 of appendix F to...

  7. Efficient Analysis of Complex Structures

    NASA Technical Reports Server (NTRS)

    Kapania, Rakesh K.

    2000-01-01

    Last various accomplishments achieved during this project are : (1) A Survey of Neural Network (NN) applications using MATLAB NN Toolbox on structural engineering especially on equivalent continuum models (Appendix A). (2) Application of NN and GAs to simulate and synthesize substructures: 1-D and 2-D beam problems (Appendix B). (3) Development of an equivalent plate-model analysis method (EPA) for static and vibration analysis of general trapezoidal built-up wing structures composed of skins, spars and ribs. Calculation of all sorts of test cases and comparison with measurements or FEA results. (Appendix C). (4) Basic work on using second order sensitivities on simulating wing modal response, discussion of sensitivity evaluation approaches, and some results (Appendix D). (5) Establishing a general methodology of simulating the modal responses by direct application of NN and by sensitivity techniques, in a design space composed of a number of design points. Comparison is made through examples using these two methods (Appendix E). (6) Establishing a general methodology of efficient analysis of complex wing structures by indirect application of NN: the NN-aided Equivalent Plate Analysis. Training of the Neural Networks for this purpose in several cases of design spaces, which can be applicable for actual design of complex wings (Appendix F).

  8. Optical Excitations and Energy Transfer in Nanoparticle Waveguides

    DTIC Science & Technology

    2009-03-01

    All calculations were performed using our own codes given in the Appendix section. The calculations were performed using Scilab programming package...January 2007, invited Speaker) 12. Scilab is a free software compatible to the famous Matlab package. It can be found at their webpage http

  9. 40 CFR 63.525 - Compliance and performance testing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... using Method 2A or 2D to determine flow rate. (ii) Method 2, 2A, 2C or 2D of 40 CFR part 60, appendix A... vapor displacement due to transfer of material into or out of the reactor shall be calculated according... necessary when using Method 2A or 2D. (ii) Method 2,2A, 2C or 2D of 40 CFR part 60, appendix A, as...

  10. Total Reducing Capacity in Aquifer Minerals and Sediments: Quantifying the Potential to Attenuate Cr(VI) in Groundwater

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sisman, S. Lara

    2015-07-20

    Hexavalent chromium, Cr(VI), is present in the environment as a byproduct of industrial processes. Due to its mobility and toxicity, it is crucial to attenuate or remove Cr(VI) from the environment. The objective of this investigation was to quantify potential natural attenuation, or reduction capacity, of reactive minerals and aquifer sediments. Samples of reduced-iron containing minerals such as ilmenite, as well as Puye Formation sediments representing a contaminated aquifer in New Mexico, were reacted with chromate. The change in Cr(VI) during the reaction was used to calculate reduction capacity. This study found that minerals that contain reduced iron, such asmore » ilmenite, have high reducing capacities. The data indicated that sample history may impact reduction capacity tests due to surface passivation. Further, this investigation identified areas for future research including: a) refining the relationships between iron content, magnetic susceptibility and reduction capacity, and b) long term kinetic testing using fresh aquifer sediments.« less

  11. First gaseous Sulfur (VI) measurements in the simulated internal flow of an aircraft gas turbine engine during project PartEmis

    NASA Astrophysics Data System (ADS)

    Katragkou, E.; Wilhelm, S.; Arnold, F.; Wilson, C.

    2004-01-01

    Gaseous S(VI) (SO3 + H2SO4) has been measured by chemical ionization mass spectrometry (CIMS) in the simulated internal flow of an aircraft gas turbine in a test rig at ground level during the PartEmis 2002 campaign. Building on S(VI) and calculated total sulfur ST the abundance ratio ɛ = S(VI)/ST was determined. The measurements to be reported here were made at two sampling points, for two engine test conditions representative of old and modern aircraft cruise and for a fuel sulfur content FSC = 1270 ppm. For both cruise conditions the measured ɛ increased with increasing exhaust age from the high pressure to the low pressure stage. For each pressure stage ɛ was higher in the modern cruise condition. The maximum ɛ (2.3 +/- 1.2%) was obtained for modern cruise and the low pressure stage. Our present data suggest that modern engines have a somewhat higher conversion efficiencies than old engines.

  12. Enhanced chromium adsorption capacity via plasma modification of natural zeolites

    NASA Astrophysics Data System (ADS)

    Cagomoc, Charisse Marie D.; Vasquez, Magdaleno R., Jr.

    2017-01-01

    Natural zeolites such as mordenite are excellent adsorbents for heavy metals. To enhance the adsorption capacity of zeolite, sodium-exchanged samples were irradiated with 13.56 MHz capacitively coupled radio frequency (RF) argon gas discharge. Hexavalent chromium [Cr(VI)] was used as the test heavy metal. Pristine and plasma-treated zeolite samples were soaked in 50 mg/L Cr solution and the amount of adsorbed Cr(VI) on the zeolites was calculated at predetermined time intervals. Compared with untreated zeolite samples, initial Cr(VI) uptake was 70% higher for plasma-treated zeolite granules (50 W 30 min) after 1 h of soaking. After 24 h, all plasma-treated zeolites showed increased Cr(VI) uptake. For a 2- to 4-month period, Cr(VI) uptake increased about 130% compared with untreated zeolite granules. X-ray diffraction analyses between untreated and treated zeolite samples revealed no major difference in terms of its crystal structure. However, for plasma-treated samples, an increase in the number of surface defects was observed from scanning electron microscopy images. This increase in the number of surface defects induced by plasma exposure played a crucial role in increasing the number of active sorption sites on the zeolite surface.

  13. 40 CFR 63.3511 - What reports must I submit?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... applicable, the calculation used to determine mass of organic HAP in waste materials according to § 63.3531(e... in waste materials according to § 63.3531(e)(3); the calculation of the total volume of coating... CPMS certification or audit. (vi) The date and time that each CPMS was inoperative, except for zero...

  14. 40 CFR 63.3511 - What reports must I submit?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... applicable, the calculation used to determine mass of organic HAP in waste materials according to § 63.3531(e... in waste materials according to § 63.3531(e)(3); the calculation of the total volume of coating... CPMS certification or audit. (vi) The date and time that each CPMS was inoperative, except for zero...

  15. Structural model of dioxouranium(VI) with hydrazono ligands.

    PubMed

    Mubarak, Ahmed T

    2005-04-01

    Synthesis and characterization of several new coordination compounds of dioxouranium(VI) heterochelates with bidentate hydrazono compounds derived from 1-phenyl-3-methyl-5-pyrazolone are described. The ligands and uranayl complexes have been characterized by various physico-chemical techniques. The bond lengths and the force constant have been calculated from asymmetric stretching frequency of OUO groups. The infrared spectral studies showed a monobasic bidentate behaviour with the oxygen and hydrazo nitrogen donor system. The effect of Hammett's constant on the bond distances and the force constants were also discussed and drawn. Wilson's matrix method, Badger's formula, Jones and El-Sonbati equations were used to determine the stretching and interaction force constant from which the UO bond distances were calculated. The bond distances of these complexes were also investigated.

  16. Structural model of dioxouranium(VI) with hydrazono ligands

    NASA Astrophysics Data System (ADS)

    Mubarak, Ahmed T.

    2005-04-01

    Synthesis and characterization of several new coordination compounds of dioxouranium(VI) heterochelates with bidentate hydrazono compounds derived from 1-phenyl-3-methyl-5-pyrazolone are described. The ligands and uranayl complexes have been characterized by various physico-chemical techniques. The bond lengths and the force constant have been calculated from asymmetric stretching frequency of O sbnd U sbnd O groups. The infrared spectral studies showed a monobasic bidentate behaviour with the oxygen and hydrazo nitrogen donor system. The effect of Hammett's constant on the bond distances and the force constants were also discussed and drawn. Wilson's matrix method, Badger's formula, Jones and El-Sonbati equations were used to determine the stretching and interaction force constant from which the U sbnd O bond distances were calculated. The bond distances of these complexes were also investigated.

  17. Chromium Stable Isotope Fractionation - An Indicator of Hexavalent Chromium Reduction.

    NASA Astrophysics Data System (ADS)

    Ellis, A.; Johnson, T. M.; Bullen, T. D.

    2001-12-01

    Chromium is a common anthropogenic contaminant in surface water and ground water, and is also of interest in oceanography. It is redox-active; the two common valences in natural waters are Cr(VI), which is highly soluble and toxic, and Cr(III), which is relatively insoluble. Redox reactions thus control Cr mobility in aqueous solutions, and reduction of Cr(VI) to Cr(III) is the most important reaction controlling attenuation of Cr in groundwater. Our results show that Cr(VI) reduction favors the lighter isotopes and leads to enrichment of heavier isotopes in the remaining Cr(VI). Cr isotope measurements thus show great promise as indicators of Cr(VI) reduction. We report here the first measurements of the magnitude of Cr isotope fractionation during Cr(VI) reduction and variations in δ 53Cr values obtained from three contaminated sites. Experiments were conducted to measure Cr isotope fractionation during Cr(VI) reduction by suspensions of magnetite and unamended sediments from a local pond, Urbana, IL and San Francisco Estuary near Martinez, CA. Suspensions were incubated anaerobically with constant shaking, and complete Cr(VI) reduction occurred within a few days. Cr(VI) from intermediate time points in the experiments was purified via ion exchange and 53Cr/52Cr ratios were measured via TIMS with a double isotope spike. The instantaneous per mil fractionation, ɛ , was calculated assuming a Rayleigh fractionation model. The ɛ for Cr(VI) reduction on magnetite surfaces yielded a fractionation of -3.5 ‰ . The ɛ values for the pond and estuary sediments were -3.5 ‰ and -3.3 ‰ respectively. The size of this Cr isotope fractionation is encouraging, as current precision is 0.2 \\permil. δ 53Cr values in dissolved Cr(VI) from three contaminated sites range from 1.1 ‰ to 5.8 ‰ , suggesting that Cr(VI) reduction has occurred and has induced isotopic fractionation in these settings. δ 53Cr values measured from Cr(VI) in plating baths show little or no fractionation during plating operations during up to 5 years of use. These results demonstrate that Cr stable isotope analyses should be a highly practical indicator of the critical chromate reduction reaction, and an otherwise useful geologic and oceanographic tool.

  18. Observations of O VI Emission from the Diffuse Interstellar Medium

    NASA Technical Reports Server (NTRS)

    Shelton, R. L.; Kruk, J. W.; Murphy, E. M.; Andersson, B. G.; Blair, W. P.; Dixon, W. V.; Edelstein, J.; Fullerton, A. W.; Gry, C.; Howk, J. C.; hide

    2001-01-01

    We report the first Far Ultraviolet Spectroscopic Explorer (FUSE) measurements of diffuse O(VI) (lambda lambda 1032,1038) emission from the general diffuse interstellar medium outside of supernova remnants or superbubbles. We observed a 30 arcsec x 30 arcsec region of the sky centered at l = 315.0 deg and b = -41.3 deg. From the observed intensities (2930 +/- 290 (random) +/- 410 (systematic) and 1790 +/- 260 (random) +/- 250 (systematic) photons/sq cm/s/sr in the 1032 and 1038 angstrom emission lines, respectively), derived equations, and assumptions about the source location, we calculate the intrinsic intensity, electron density, thermal pressure, and emitting depth. The intensities are too large for the emission to originate solely in the Local Bubble. Thus, we conclude that the Galactic thick disk and lower halo also contribute. High velocity clouds are ruled out because there are none near the pointing direction. The calculated emitting depth is small, indicating that the O(VI)-bearing gas fills a small volume. The observations can also be used to estimate the cooling rate of the hot interstellar medium and constrain models. The data also yield the first intensity measurement of the C(II) 3s 2S(1/2) to 2p 2P(3/2) emission line at 1037 angstrom and place upper limits on the intensities of ultraviolet line emission from C(I), C(III), Si(II), S(III), S(IV), S(VI), and Fe(III).

  19. The oxidation of Cr(III) to Cr(VI) in the environment by atmospheric oxygen during the bush fires.

    PubMed

    Panichev, N; Mabasa, W; Ngobeni, P; Mandiwana, K; Panicheva, S

    2008-05-30

    The presence of Cr(VI) in soils and plants of remote unpolluted areas can be explained by partial oxidation of Cr(III) with atmospheric oxygen during seasonable bush fires, which are rather frequent event in South Africa. Experiments with thermal treatment of a veld grass, Hyperthelia dissoluta, in muffle furnace at high temperature, followed by electrothermal atomic absorption spectrometry (ETAAS) determination of chromium, show a remarkable increase in Cr(VI) concentration from initial 2.5 to 23.2% after the treatment of grass ash at 500 degrees C and to 58.1% at 900 degrees C. Before ETAAS determination, the two chromium species of interest were separated by the treatment of samples with 0.1M Na2CO3. Thermodynamic calculations confirm the possibility of Cr(III) to Cr(VI) oxidation with atmospheric oxygen at high temperature in alkaline media, which is typical for vegetation ash. Analysis of field samples show that percent of Cr(VI), in respect to the total amount of chromium increased from initial 2.5% in grass to 9.3% in ash of grass. Without oxidation the percent of Cr(VI) in grass and ash of grass should be a constant value. After the fire Cr(VI) concentration in top soil (0-3 cm) increased from 0.3+/-0.05 to 1.8+/-0.5 microg g(-1) and the total Cr from 26+/-9 to 69+/-14 microg g(-1). The reason for the appearance of additional amount of Cr on top soil can be explained by condensation of chromium species from flame and shouldering ash on a soil surface. The results of studies demonstrate that Cr(VI) is formed by Cr(III) oxidation with atmospheric oxygen at high temperature during bush fires.

  20. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... least three significant figures shall be reported. 4.3Off mode. 4.3.1Pool heaters with a seasonal off... significant figures shall be reported. 5.Calculations. 5.1Thermal efficiency. Calculate the thermal efficiency...

  1. CRYPTOSPORIDIUM LOG INACTIVATION CALCULATION METHODS

    EPA Science Inventory

    Appendix O of the Surface Water Treatment Rule (SWTR) Guidance Manual introduces the CeffT10 (i.e., reaction zone outlet C value and T10 time) method for calculating ozone CT value and Giardia and virus log inactivation. The LT2ESWTR Pre-proposal Draft Regulatory Language for St...

  2. Adsorption of Cr(VI) on cerium immobilized cross-linked chitosan composite in single system and coexisted with Orange II in binary system.

    PubMed

    Zhu, Tianyi; Huang, Wei; Zhang, Lingfan; Gao, Jie; Zhang, Wenqing

    2017-10-01

    In this work, cerium immobilized cross-linked chitosan (CTS-Ce) composite, employed as an efficient adsorbent for Cr(VI) in single system and coexisted with Orange II (OII) in binary system, was prepared by co-precipitation method. The as-obtained adsorbent was characterized by FTIR, SEM, EDS and XPS before and after adsorption. The adsorption behaviors of Cr(VI) in single and binary system were systematically studied. The maximum adsorption capacity of Cr(VI) on CTS-Ce (202.8mg/g) was calculated by Langmuir equation in single metal system, but it decreased to 112.9mg/g with initial concentration of 100mg/L OII in binary system at pH 2 and 293K. The adsorption data for Cr(VI) followed the Langmuir model in single system, while fitted Temkin model well in binary system. In both single and binary system, the kinetics of adsorption exhibited pseudo-second order behavior and adsorption capacity increased with increasing temperature. Moreover, the data of thermodynamic parameters (ΔG°<0, ΔH°>0) indicated that the adsorption was a spontaneous and endothermic process. Besides, |ΔG Cr |>|ΔG Cr-OII | at the same temperature further suggested that Cr(VI) was adsorbed on the CTS-Ce composite faster in binary system than in single system. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Isotherm Modelling, Kinetic Study and Optimization of Batch Parameters Using Response Surface Methodology for Effective Removal of Cr(VI) Using Fungal Biomass

    PubMed Central

    Chidambaram, Ramalingam

    2015-01-01

    Biosorption is a promising alternative method to replace the existing conventional technique for Cr(VI) removal from the industrial effluent. In the present experimental design, the removal of Cr(VI) from the aqueous solution was studied by Aspergillus niger MSR4 under different environmental conditions in the batch systems. The optimum conditions of biosorption were determined by investigating pH (2.0) and temperature (27°C). The effects of parameters such as biomass dosage (g/L), initial Cr(VI) concentration (mg/L) and contact time (min) on Cr(VI) biosorption were analyzed using a three parameter Box–Behnken design (BBD). The experimental data well fitted to the Langmuir isotherm, in comparison to the other isotherm models tested. The results of the D-R isotherm model suggested that a chemical ion-exchange mechanism was involved in the biosorption process. The biosorption process followed the pseudo-second-order kinetic model, which indicates that the rate limiting step is chemisorption process. Fourier transform infrared (FT-IR) spectroscopic studies revealed the possible involvement of functional groups, such as hydroxyl, carboxyl, amino and carbonyl group in the biosorption process. The thermodynamic parameters for Cr(VI) biosorption were also calculated, and the negative ∆Gº values indicated the spontaneous nature of biosorption process. PMID:25786227

  4. Impact of the uranium (VI) speciation in mineralised urines on its extraction by calix[6]arene bearing hydroxamic groups used in chromatography columns.

    PubMed

    Baghdadi, S; Bouvier-Capely, C; Ritt, A; Peroux, A; Fevrier, L; Rebiere, F; Agarande, M; Cote, G

    2015-11-01

    Actinides determination in urine samples is part of the analyses performed to monitor internal contamination in case of an accident or a terrorist attack involving nuclear matter. Mineralisation is the first step of any of these analyses. It aims at reducing the sample volume and at destroying all organic compounds present. The mineralisation protocol is usually based on a wet ashing step, followed by actinides co-precipitation and a furnace ashing step, before redissolution and the quantification of the actinides by the appropriate techniques. Amongst the existing methods to perform the actinides co-precipitation, alkali-earth (typically calcium) precipitation is widely used. In the present work, the extraction of uranium(VI), plutonium(IV) and americium(III) from the redissolution solutions (called "mineralised urines") on calix[6]arene columns bearing hydroxamic groups was investigated as such an extraction is a necessary step before their determination by ICP-MS or alpha spectrometry. Difficulties were encountered in the transfer of uranium(VI) from raw to mineralised urines, with yield of transfer ranging between 0% and 85%, compared to about 90% for Pu and Am, depending on the starting raw urines. To understand the origin of such a difficulty, the speciation of uranium (VI) in mineralised urines was investigated by computer simulation using the MEDUSA software and the associated HYDRA database, compiled with recently published data. These calculations showed that the presence of phosphates in the "mineralised urines" leads to the formation of strong uranyl-phosphate complexes (such as UO2HPO4) which compete with the uranium (VI) extraction by the calix[6]arene bearing hydroxamic groups. The extraction constant of uranium (VI) by calix[6]arene bearing hydroxamic groups was determined in a 0.04 mol L(-1) sodium nitrate solution (logK=4.86±0.03) and implemented in an extraction model taking into account the speciation in the aqueous phase. This model allowed to simulate satisfactorily the experimental uranium extraction data and to support the preliminary conclusions about the role of the phosphates present in mineralised urines. These calculations also showed that the phosphate/calcium ratio is a key parameter as far as the efficiency of the uranium (VI) extraction by the calix[6]arene columns is concerned. It predicted that the addition of CaCl2 in mineralised urines would release uranium (VI) from phosphates by forming calcium (II)-phosphate complexes and thus facilitate the uranium (VI) extraction on calix[6]arene columns. These predictions were confirmed experimentally as the addition of 0.1 mol L(-1) CaCl2 to a mineralised urine containing naturally a high concentration of phosphate (typically 0.04 mol L(-1)) significantly increased the percentage of uranium (VI) extraction on the calix[6]arene columns. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Federal Emission Test Procedure and the following results were calculated: HC=.139 grams/mile CO=1.59 grams/mile CO2=317 grams/mile According to the procedure in § 600.113-78, the city fuel economy or MPGc, for the vehicle may be calculated by substituting the HC, CO, and CO2 grams/mile values into the...

  6. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Federal Emission Test Procedure and the following results were calculated: HC=.139 grams/mile CO=1.59 grams/mile CO2=317 grams/mile According to the procedure in § 600.113-78, the city fuel economy or MPGc, for the vehicle may be calculated by substituting the HC, CO, and CO2 grams/mile values into the...

  7. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Federal Emission Test Procedure and the following results were calculated: HC=.139 grams/mile CO=1.59 grams/mile CO2=317 grams/mile According to the procedure in § 600.113-78, the city fuel economy or MPGc, for the vehicle may be calculated by substituting the HC, CO, and CO2 grams/mile values into the...

  8. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Federal Emission Test Procedure and the following results were calculated: HC=.139 grams/mile CO=1.59 grams/mile CO2=317 grams/mile According to the procedure in § 600.113-78, the city fuel economy or MPGc, for the vehicle may be calculated by substituting the HC, CO, and CO2 grams/mile values into the...

  9. Calculation of the electron structure of vacancies and their compensated states in III-VI semiconductors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mehrabova, M. A., E-mail: Mehrabova@mail.ru; Madatov, R. S.

    2011-08-15

    The Green's functions theory and the bond-orbital model are used as a basis for calculations of the electron structure of local defects-specifically, vacancies and their compensated states in III-VI semiconductors. The energy levels in the band gap are established, and the changes induced in the electron densities in the GaS, GaSe, and InSe semiconductors by anion and cation vacancies and their compensated states are calculated. It is established that, if a vacancy is compensated by an atom of an element from the same subgroup with the same tetrahedral coordination and if the ionic radius of the compensating atom is smallermore » than that of the substituted atom, the local levels formed by the vacancy completely disappear. It is shown that this mechanism of compensation of vacancies provides a means not only for recovering the parameters of the crystal, but for improving the characteristics of the crystal as well.« less

  10. MX Siting Investigation Gravity Survey - Wah Wah Valley, Utah.

    DTIC Science & Technology

    1981-05-15

    Bouguer Anomaly (see Section A1.4, Appendix A1.0). The Defense Mapping Agency Aerospace Center (DMAAC), St. Louis, Missouri, calculates outer zone...Utah .... 12 LIST OF DRAWINGS Drawing Number 1 Complete Bouguer Anomaly Contours In Pocket at 2 Deptn to Rock - Interpreted from End of Report...DMAHTC/GSS obtained the basic observations for the new stations and reduced them to Simple Bouguer Anomalies (SBA) as described in Appendix A1.0. Up to

  11. MISSE-6 Post-Flight Examination, Disassembly and Analysis Results

    DTIC Science & Technology

    2010-12-21

    Wiring, QCM wiring, and Rotor/ Sensor wiring. The data wiring for the Boeing experiments including QCMs and Rotor/ Sensor were labeled, removed, and...for a QCM In addition, Q9 was properly wired into datalogger D8, and the rotor sensor was properly wired into datalogger D9. Datalogger D9 was a...Wiring. Appendix B – Time-Temperature Results from Thermal Sensors distributed on MISSE-6A and MISSE-6B Appendix C - Atomic Oxygen Calculation

  12. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Favorite, Jeffrey A.

    SENSMG is a tool for computing first-order sensitivities of neutron reaction rates, reaction-rate ratios, leakage, k eff, and α using the PARTISN multigroup discrete-ordinates code. SENSMG computes sensitivities to all of the transport cross sections and data (total, fission, nu, chi, and all scattering moments), two edit cross sections (absorption and capture), and the density for every isotope and energy group. It also computes sensitivities to the mass density for every material and derivatives with respect to all interface locations. The tool can be used for one-dimensional spherical (r) and two-dimensional cylindrical (r-z) geometries. The tool can be used formore » fixed-source and eigenvalue problems. The tool implements Generalized Perturbation Theory (GPT) as discussed by Williams and Stacey. Section II of this report describes the theory behind adjoint-based sensitivities, gives the equations that SENSMG solves, and defines the sensitivities that are output. Section III describes the user interface, including the input file and command line options. Section IV describes the output. Section V gives some notes about the coding that may be of interest. Section VI discusses verification, which is ongoing. Section VII lists needs and ideas for future work. Appendix A lists all of the input files whose results are presented in Sec. VI.« less

  13. 12 CFR Appendix A to Part 325 - Statement of Policy on Risk-Based Capital

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... qualifying and excess capital, calculate risk-weighted assets, calculate market risk equivalent assets and... and control financial and operating risks, including the risk presented by concentrations of credit... instrument approaches maturity, the instrument begins to take on charcteristics of a short-term obligation...

  14. 24 CFR Appendix II to Subpart C of... - Development of Standards; Calculation Methods

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...; Calculation Methods I. Background Information Concerning the Standards (a) Thermal Radiation: (1) Introduction... and structures in the event of fire. The resulting fireball emits thermal radiation which is absorbed... radiation being emitted. The radiation can cause severe burn, injuries and even death to exposed persons...

  15. 40 CFR 63.4720 - What reports must I submit?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...; and if applicable, the calculation used to determine mass of organic HAP in waste materials according... determine mass of organic HAP in waste materials according to § 63.4751(e)(4); the calculation of the total... certification or audit. (vi) The date and time that each CPMS was inoperative, except for zero (low-level) and...

  16. Theoretical Study of Defect Signatures in III-V and II-VI Semiconductors

    DTIC Science & Technology

    2006-03-01

    collaboration with experimentalists at Linköpin University (Sweden), we identified the recently observed EPR signals in diluted GaPN to be Gallium ...the results from USPP calculations to all electron calculations. o Study NO-Zni complexes and other point defects in ZnO using USPP calculations...parameters for point defects in semiconductors. o Results on stability of NO-Zni complexes in ZnO and preliminary results on their electronic

  17. 40 CFR Appendix Xvi to Part 86 - Pollutant Mass Emissions Calculation Procedure for Gaseous-Fueled Vehicles and for Vehicles...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... Where: Ywm = Weighted mass emissions of each pollutant, i.e., HC, CO, NOX or CO , in grams per vehicle mile. Yct = Mass emissions as calculated from the “transient” phase of the cold start test, in grams... grams per test phase. Ys = Mass emissions as calculated from the “stabilized” phase of the cold start...

  18. 40 CFR Appendix Xvi to Part 86 - Pollutant Mass Emissions Calculation Procedure for Gaseous-Fueled Vehicles and for Vehicles...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Where: Ywm = Weighted mass emissions of each pollutant, i.e., HC, CO, NOX or CO , in grams per vehicle mile. Yct = Mass emissions as calculated from the “transient” phase of the cold start test, in grams... grams per test phase. Ys = Mass emissions as calculated from the “stabilized” phase of the cold start...

  19. 40 CFR Appendix Xvi to Part 86 - Pollutant Mass Emissions Calculation Procedure for Gaseous-Fueled Vehicles and for Vehicles...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... Where: Ywm = Weighted mass emissions of each pollutant, i.e., HC, CO, NOX or CO , in grams per vehicle mile. Yct = Mass emissions as calculated from the “transient” phase of the cold start test, in grams... grams per test phase. Ys = Mass emissions as calculated from the “stabilized” phase of the cold start...

  20. 40 CFR Appendix Xvi to Part 86 - Pollutant Mass Emissions Calculation Procedure for Gaseous-Fueled Vehicles and for Vehicles...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... Where: Ywm = Weighted mass emissions of each pollutant, i.e., HC, CO, NOX or CO , in grams per vehicle mile. Yct = Mass emissions as calculated from the “transient” phase of the cold start test, in grams... grams per test phase. Ys = Mass emissions as calculated from the “stabilized” phase of the cold start...

  1. Statistically Derived System Relationship Models for the SASSY Management Unit, 1st Force Service Support Group, Camp Pendelton, California.

    DTIC Science & Technology

    1981-06-01

    TI - 59 programmable calculator to aid...training. The Texas Instruments TI - 59 Programmable Calculator has only ten lettered registers that would be simple for clerical personnel to use (A...SASSY Management Units. Appendix C is a set of user instructions written for the Texas Instrument TI - 59 Programmable Calculator . The TI-59 was

  2. Diffusion of U(VI) in Opalinus Clay: Influence of temperature and humic acid

    NASA Astrophysics Data System (ADS)

    Joseph, C.; Van Loon, L. R.; Jakob, A.; Steudtner, R.; Schmeide, K.; Sachs, S.; Bernhard, G.

    2013-05-01

    The diffusion of U(VI) (c0 = 1 × 10-6 mol/L) in compacted Opalinus Clay from the Mont Terri underground laboratory, Switzerland, was studied in the absence and presence of humic acid (10 mg/L) at two different temperatures (25 °C, 60 °C) under anaerobic conditions. As background electrolyte synthetic Opalinus Clay pore water (pH 7.6, I = 0.36 mol/L) was used. The diffusion-accessible porosity, ɛ, was determined for each Opalinus Clay bore core sample by through-diffusion experiments with tritiated water (HTO) before the U(VI) diffusion experiments were carried out. The values for the effective diffusion and distribution coefficients De and Kd obtained for U(VI) and humic acid at 25 °C as well as at 60 °C showed that humic acid has no significant influence on the U(VI) diffusion. The diffusion profiles of humic acid in Opalinus Clay at 25 and 60 °C indicate the contributions of two different humic acid particle size fractions (<1 kDa and 10-100 kDa). The small-sized humic acid fraction diffused through the whole Opalinus Clay samples at both temperatures within the 3 month duration of the U(VI) diffusion experiments. At 60 °C, diffusion profiles of two different U(VI) species were observed. In a separate experiment the U(VI) speciation in the source reservoir solution at 60 °C was analyzed by laser-induced fluorescence spectroscopy, photon correlation spectroscopy and scanning electron microscopy with an energy dispersive X-ray detector. The two diffusion profiles could be attributed to an unknown colloidal and a known aquatic U(VI) species (Ca2UO2(CO3)3(aq)). The diffusion results showed that the interaction of U(VI) and of the large-sized humic acid colloid fraction with the clay is stronger at 60 °C. An increase of Kd from 0.025 ± 0.003 m3/kg at 25 °C to 0.25 ± 0.05 m3/kg for U(VI)colloidal at 60 °C was determined. In addition, the value for De of U(VI) increased with increasing temperature. Using the De values at 25 and 60 °C, a preliminary activation energy for the diffusion of U(VI) through Opalinus Clay of 10 kJ/mol was calculated. The observed increased Kd and De values for U(VI)aqueous at 60 °C compensated each other to almost equal values of the apparent diffusion coefficient Da at 25 and 60 °C. Hence, an elevated temperature of 60 °C does not impact the migration of U(VI) through OPA significantly.

  3. ORFEUS spectroscopy of the O BT VI lines in symbiotic stars and the Raman scattering process

    NASA Astrophysics Data System (ADS)

    Schmid, H. M.; Krautter, J.; Appenzeller, I.; Barnstedt, J.; Dumm, T.; Fromm, A.; Gölz, M.; Grewing, M.; Gringel, W.; Haas, C.; Hopfensitz, W.; Kappelmann, N.; Krämer, G.; Lindenberger, A.; Mandel, H.; Mürset, U.; Schild, H.; Schmutz, W.; Widmann, H.

    1999-08-01

    We present orfeus spectra of the O vi lambda lambda 1032,1038 emission lines in the symbiotic stars AG Dra, V1016 Cyg, RR Tel, CD-43(deg) 14304, AG Peg and Z And. The O vi emission lines can convert into broad and highly polarized emission lines at lambda 6825 and lambda 7082 in a Raman scattering process by neutral hydrogen. From a comparison of direct and Raman scattered radiation we extract new information on the scattering geometry in symbiotic systems. The nebular O vi emission lines are in all objects redshifted by about +40 km s(-1) . This can be explained as a radiative line transfer effect in a slowly expanding emission region. A comparable redshift is measured in the Raman scattered O vi lines. In AG Peg the O vi emissions show beside a narrow nebular line a broad component from a fast stellar wind outflow. Many interstellar absorption lines of molecular hydrogen are detected, particularly near the O vi lambda 1038 component. With model calculations we investigate their impact on the O vi lines. From the dereddened line fluxes of the direct and Raman scattered O vi lines we derive the scattering efficiency, which is defined as photon flux ratio N_Raman/N_O VI. The efficiencies derived for RR Tel, V1016 Cyg and Z And indicate that about 30% of the released O vi lambda 1032 photons interact with the neutral scattering region. The efficiencies for AG Dra and CD-43(deg14304) are much higher, which may suggest that the O vi nebulosity is embedded in a H(0) -region. The D-type system RR Tel shows strong line profile differences between the direct O vi emission, which is single-peaked, and the Raman scattered emission, which is double-peaked. This indicates that the neutral scattering region in RR Tel ``sees'' different O vi line profiles, implying that the O vi nebulosity is far from spherically symmetric. In a tentative model we suggest for RR Tel an O vi flow pattern where material streams from the cool giant towards the hot component, which further accelerates the gas radially. For the S-type systems AG Dra, CD-43(deg14304) and Z And the line profile differences between the direct and the Raman scattered O vi emissions are less pronounced. This may suggest that the O vi profiles depend less on the emission direction than in the D-type system RR Tel. For AG Peg we detect for the first time the Raman scattered emission at lambda 6825. The Raman line shows a narrow, nebular component as the O vi line, but no equivalent emission to the broad O vi wind component. The higher conversion efficiency for the narrow component indicates that the nebular O vi emission is significantly closer to the cool giant than the hot, mass losing component, and strongly supports previous colliding wind models for this object. Based on observations taken during the orfeus-spas i and orfeus-spas ii space shuttle missions, and ground based data collected at the ESO 2.2m and 3.6m telescopes at La Silla, Chile, and the 4.2m William Herschel Telescope at La Palma, Canary Islands. ESO observations were granted for the programs 52.7-040 and 58.D-0866.

  4. Survey and Assessment of Models or Decision Rules Determining Spare Parts Levels for Navy Electronics Equipments. Appendix A. Applicable Literature Source Material.

    DTIC Science & Technology

    1979-09-07

    1$.It .400 0 4 U 0 go oil 9999 0003,68 C0.rroCl.LF611F1. L4 1*6 .400o G0 s0 U 0 of 96 420 0033092,c S6art 311104L.Pump IS 9706* .&see t I IS 0 00 to...of the modcLI a large number dt reair part cla~ses were defined oil thle ai tf notnenl~tnr and hir each ch"~ 6 and IS m ere comnputed fnm &P. avznak...simi- applie:Ltious ill .I larly, we find n3*-4 and n*-. Thus, if c:VI’ :, of (9), the oIl il.: - % R. Optimal Redundancy 587 h~ type used during From n

  5. Hypersurface Insertion Window for Long Term Orbital Stability of Artificial Satellites About the Planet Venus

    DTIC Science & Technology

    1988-12-01

    Conversion of the Geopotential into the Modified Orbital Elements 83 Appendix C: Useful Derivatives for the Geopotential Calculations 87 Appendix D...replaced by two equinoctial elements , h and k (from a coordinate system with singularities at i = x and for rectilinear orbits ). Also, for long term 3...0. 10 and 0.55 i 15.5) a more well behaved set of variables will be used: two of the equinoctial elements , h and k. These elements eliminate the

  6. Damage Accumulation Process in Advanced Metal Matrix Composite Under Thermal Cycling

    DTIC Science & Technology

    1991-11-20

    are calculated using the Eshelby’s equivalent inclusion method, (30) see Appendix A, where the eigenstrain eT is replaced by a °, Eq.(1). Oy - (1-Cm...and (2) e* is the fictitious eigenstrain introduced into the fiber domain (see Appendix A). The dots used in Eqs. (2) and (3) are inner product...Equivalent Inclusion Method Here we consider a composite which consists of aligned ellipsoidal inhomogeneities !a with a prescribed eigenstrain eT (called an

  7. Development of Methodology and Technology for Identifying and Quantifying Emission Products from Open Burning and Open Detonation Thermal Treatment Methods. Bangbox Test Series. Volume 2. Test Development

    DTIC Science & Technology

    1992-01-01

    Calculated by the Carbon Balance and by the C -V M ethod . ...................................... ... ... ... ... ... 6-8 x I I Table 6.3 EF for the...A-i APPENDIX B. SAMPLING AND DETERMINATION OF POLYCHLORINATED DIBENZODIOXINS AND DIBENZOFURANS ................. B-13 APPENDIX C . DISTRIBUTION... C -I I I I I I I I I I I I I I xiii I INTENTIONALLY BLANK xiv --I IACKNOWLEDGEMENTS I The following

  8. Hexavalent chromium content in stainless steel welding fumes is dependent on the welding process and shield gas type.

    PubMed

    Keane, Michael; Stone, Samuel; Chen, Bean; Slaven, James; Schwegler-Berry, Diane; Antonini, James

    2009-02-01

    Occupational exposure to welding fumes is a known health hazard. To isolate elements in stainless steel welding fumes with high potential for adverse health outcomes, fumes were generated using a robotic gas metal arc system, using four shield gases of varying oxygen content. The objective was to measure Cr(VI) concentrations in a broad spectrum of gas metal arc welding processes, and identify processes of exceptionally high or low Cr(VI) content. The gases used were 95% Ar/5% O(2), 98% Ar/2% O(2), 95% Ar/5%CO(2), and 75% He/25% Ar. The welder was operated in axial spray mode (Ar/O(2), Ar/CO(2)), short-circuit (SC) mode (Ar/CO(2) low voltage and He/Ar), and pulsed axial-spray mode (98% Ar/2% O(2)). Results indicate large differences in Cr(VI) in the fumes, with Ar/O(2) (Pulsed)>Ar/O(2)>Ar/CO(2)>Ar/CO(2) (SC)>He/Ar; values were 3000+/-300, 2800+/-85, 2600+/-120, 1400+/-190, and 320+/-290 ppm respectively (means +/- standard errors for 2 runs and 3 replicates per run). Respective rates of Cr(VI) generation were 1.5, 3.2, 4.4, 1.3, and 0.46 microg/min; generation rates were also calculated in terms of microg Cr(VI) per metre of wire used. The generation rates of Cr(VI) increased with increasing O(3) concentrations. Particle size measurements indicated similar distributions, but somewhat higher >0.6 microm fractions for the short-circuit mode samples. Fumes were also sampled into 2 selected size ranges, a microspatter fraction (>or=0.6 microm) and a fine (<0.6 microm) fraction; analysis indicated that Cr(VI) is primarily associated with particles <0.6 microm. The conclusion of the study is that Cr(VI) concentrations vary significantly with welding type and shield gas type, and this presents an opportunity to tailor welding practices to lessen Cr(VI) exposures in workplaces by selecting low Cr(VI)-generating processes. Short-circuit processes generated less Cr(VI) than axial-spray methods, and inert gas shielding gave lower Cr(VI) content than shielding with active gases. A short circuit He/Ar shielded process and a pulsed axial spray Ar/O(2) process were both identified as having substantially lower Cr(VI) generation rates per unit of wire used relative to the other processes studied.

  9. Variation and decomposition of the partial molar volume of small gas molecules in different organic solvents derived from molecular dynamics simulations.

    PubMed

    Klähn, Marco; Martin, Alistair; Cheong, Daniel W; Garland, Marc V

    2013-12-28

    The partial molar volumes, V(i), of the gas solutes H2, CO, and CO2, solvated in acetone, methanol, heptane, and diethylether are determined computationally in the limit of infinite dilution and standard conditions. Solutions are described with molecular dynamics simulations in combination with the OPLS-aa force field for solvents and customized force field for solutes. V(i) is determined with the direct method, while the composition of V(i) is studied with Kirkwood-Buff integrals (KBIs). Subsequently, the amount of unoccupied space and size of pre-formed cavities in pure solvents is determined. Additionally, the shape of individual solvent cages is analyzed. Calculated V(i) deviate only 3.4 cm(3) mol(-1) (7.1%) from experimental literature values. Experimental V(i) variations across solutions are reproduced qualitatively and also quantitatively in most cases. The KBI analysis identifies differences in solute induced solvent reorganization in the immediate vicinity of H2 (<0.7 nm) and solvent reorganization up to the third solvation shell of CO and CO2 (<1.6 nm) as the origin of V(i) variations. In all solutions, larger V(i) are found in solvents that exhibit weak internal interactions, low cohesive energy density and large compressibility. Weak internal interactions facilitate solvent displacement by thermal solute movement, which enhances the size of solvent cages and thus V(i). Additionally, attractive electrostatic interactions of CO2 and the solvents, which do not depend on internal solvent interactions only, partially reversed the V(i) trends observed in H2 and CO solutions where electrostatic interactions with the solvents are absent. More empty space and larger pre-formed cavities are found in solvents with weak internal interactions, however, no evidence is found that solutes in any considered solvent are accommodated in pre-formed cavities. Individual solvent cages are found to be elongated in the negative direction of solute movement. This wake behind the moving solute is more pronounced in case of mobile H2 and in solvents with weaker internal interactions. However, deviations from a spherical solvent cage shape do not influence solute-solvent radial distribution functions after averaging over all solvent cage orientations and hence do not change V(i). Overall, the applied methodology reproduces V(i) and its variations reliably and the used V(i) decompositions identify the underlying reasons behind observed V(i) variations.

  10. Variation and decomposition of the partial molar volume of small gas molecules in different organic solvents derived from molecular dynamics simulations

    NASA Astrophysics Data System (ADS)

    Klähn, Marco; Martin, Alistair; Cheong, Daniel W.; Garland, Marc V.

    2013-12-01

    The partial molar volumes, bar V_i, of the gas solutes H2, CO, and CO2, solvated in acetone, methanol, heptane, and diethylether are determined computationally in the limit of infinite dilution and standard conditions. Solutions are described with molecular dynamics simulations in combination with the OPLS-aa force field for solvents and customized force field for solutes. bar V_i is determined with the direct method, while the composition of bar V_i is studied with Kirkwood-Buff integrals (KBIs). Subsequently, the amount of unoccupied space and size of pre-formed cavities in pure solvents is determined. Additionally, the shape of individual solvent cages is analyzed. Calculated bar V_i deviate only 3.4 cm3 mol-1 (7.1%) from experimental literature values. Experimental bar V_i variations across solutions are reproduced qualitatively and also quantitatively in most cases. The KBI analysis identifies differences in solute induced solvent reorganization in the immediate vicinity of H2 (<0.7 nm) and solvent reorganization up to the third solvation shell of CO and CO2 (<1.6 nm) as the origin of bar V_i variations. In all solutions, larger bar V_i are found in solvents that exhibit weak internal interactions, low cohesive energy density and large compressibility. Weak internal interactions facilitate solvent displacement by thermal solute movement, which enhances the size of solvent cages and thus bar V_i. Additionally, attractive electrostatic interactions of CO2 and the solvents, which do not depend on internal solvent interactions only, partially reversed the bar V_i trends observed in H2 and CO solutions where electrostatic interactions with the solvents are absent. More empty space and larger pre-formed cavities are found in solvents with weak internal interactions, however, no evidence is found that solutes in any considered solvent are accommodated in pre-formed cavities. Individual solvent cages are found to be elongated in the negative direction of solute movement. This wake behind the moving solute is more pronounced in case of mobile H2 and in solvents with weaker internal interactions. However, deviations from a spherical solvent cage shape do not influence solute-solvent radial distribution functions after averaging over all solvent cage orientations and hence do not change bar V_i. Overall, the applied methodology reproduces bar V_i and its variations reliably and the used bar V_i decompositions identify the underlying reasons behind observed bar V_i variations.

  11. Energy levels, oscillator strengths, and transition probabilities for sulfur-like scandium, Sc VI

    NASA Astrophysics Data System (ADS)

    El-Maaref, A. A.; Abou Halaka, M. M.; Saddeek, Yasser B.

    2017-09-01

    Energy levels, Oscillator strengths, and transition probabilities for sulfur-like scandium are calculated using CIV3 code. The calculations have been executed in an intermediate coupling scheme using Breit-Pauli Hamiltonian. The present calculations have been compared with the experimental data and other theoretical calculations. LANL code has been used to confirm the accuracy of the present calculations, where the calculations using CIV3 code agree well with the corresponding values by LANL code. The calculated energy levels and oscillator strengths are in reasonable agreement with the published experimental data and theoretical values. We have calculated lifetimes of some excited levels, as well.

  12. Facile synthesis of reduced graphene oxide/peroxomolybdate(VI)-citrate composite and its potential energy storage application

    NASA Astrophysics Data System (ADS)

    Ciszewski, Mateusz; Benke, Grzegorz; Leszczyńska-Sejda, Katarzyna; Kopyto, Dorota

    2017-11-01

    A new energy storage material based on molybdate active species has been presented. Molybdenum seems to be a perspective material in supercapacitors because of numerous possible metal oxidation states, electrolyte storage by means of various chemical reactions and availability in comparison to other refractory metals. Material synthesized within this research was composed of reduced graphene oxide matrix and peroxomolybdate(VI)-citrate active dimers. It was showed that peroxomolybdate(VI)-citrate structure enhanced electrochemical activity of symmetric supercapacitor. Simple methodology was used to synthesize a composite with pH adjustment as the key step. The specific capacity calculated from galvanostatic charge/discharge curves was as high as 250 F/g. Material was distinguished by good cyclability with 5% capacity loss after 1000 cycles. The increase in charge transfer resistance, induced by metal-oxygen compound within the carbon matrix was relatively low, compared to parent reduced graphene oxide. Amorphous structure of peroxomolybdate(VI)-modified material was observed with slight increase in the interlayer distance in comparison to parent reduced graphene oxide. The height and lateral size of crystallites were also determined. Significant decrease in the specific surface area of peroxomolybdate(VI)-modified composite was observed, in comparison to the parent reduced graphene oxide.

  13. Ring test evaluation of the detection of influenza A virus in swine oral fluids by real-time reverse-transcription polymerase chain reaction and virus isolation

    PubMed Central

    Goodell, Christa K.; Zhang, Jianqiang; Strait, Erin; Harmon, Karen; Patnayak, Devi; Otterson, Tracy; Culhane, Marie; Christopher-Hennings, Jane; Clement, Travis; Leslie-Steen, Pamela; Hesse, Richard; Anderson, Joe; Skarbek, Kevin; Vincent, Amy; Kitikoon, Pravina; Swenson, Sabrina; Jenkins-Moore, Melinda; McGill, Jodi; Rauh, Rolf; Nelson, William; O’Connell, Catherine; Shah, Rohan; Wang, Chong; Main, Rodger; Zimmerman, Jeffrey J.

    2016-01-01

    The probability of detecting influenza A virus (IAV) in oral fluid (OF) specimens was calculated for each of 13 assays based on real-time reverse-transcription polymerase chain reaction (rRT-PCR) and 7 assays based on virus isolation (VI). The OF specimens were inoculated with H1N1 or H3N2 IAV and serially diluted 10-fold (10−1 to 10−8). Eight participating laboratories received 180 randomized OF samples (10 replicates × 8 dilutions × 2 IAV subtypes plus 20 IAV-negative samples) and performed the rRT-PCR and VI procedure(s) of their choice. Analysis of the results with a mixed-effect logistic-regression model identified dilution and assay as variables significant (P < 0.0001) for IAV detection in OF by rRT-PCR or VI. Virus subtype was not significant for IAV detection by either rRT-PCR (P = 0.457) or VI (P = 0.101). For rRT-PCR the cycle threshold (Ct) values increased consistently with dilution but varied widely. Therefore, it was not possible to predict VI success on the basis of Ct values. The success of VI was inversely related to the dilution of the sample; the assay was generally unsuccessful at lower virus concentrations. Successful swine health monitoring and disease surveillance require assays with consistent performance, but significant differences in reproducibility were observed among the assays evaluated. PMID:26733728

  14. Tissue viability imaging: microvascular response to vasoactive drugs induced by iontophoresis.

    PubMed

    Henricson, Joakim; Nilsson, Anders; Tesselaar, Erik; Nilsson, Gert; Sjöberg, Folke

    2009-09-01

    When one is studying the physiology of the cutaneous microcirculation there is a need for relevant non-invasive and versatile techniques. In this study we used a new optical device, the tissue viability imager (TiVi), to map changes in cutaneous microvascular concentrations of red blood cells during iontophoresis of vasoactive substances (noradrenaline (NA) and phenylephrine (Phe) for vasoconstriction and acetylcholine (ACh) and sodium nitroprusside (SNP) for vasodilatation). We aimed to present data both individually and pooled, using a four-variable logistic dose response model that is commonly used in similar in vitro vascular studies. The accuracy of the TiVi was also investigated by calculating the coefficient of variation and comparing it with similar tests previously done using laser Doppler imaging. Tests were also performed using the TiVi and LDPI simultaneously to further compare the two methods. Results showed that the TiVi is capable of quantifying vascular responses to iontophorised noradrenaline and phenylephrine without the need to increase background flow first. Fitting the TiVi data to the dose response model resulted in ED(50)-values with narrow confidence intervals and acceptable r(2) values. Mean ED(50)-values for the TiVi did not differ significantly from similar values obtained using laser Doppler. Results further seem to suggest that when the blood perfusion increases during vasodilatation in skin the initial phase relies mainly on an increase in red blood cell concentration whereas the further perfusion increase is due to an increase in red blood cell velocity.

  15. Clinically acceptable agreement between the ViMove wireless motion sensor system and the Vicon motion capture system when measuring lumbar region inclination motion in the sagittal and coronal planes.

    PubMed

    Mjøsund, Hanne Leirbekk; Boyle, Eleanor; Kjaer, Per; Mieritz, Rune Mygind; Skallgård, Tue; Kent, Peter

    2017-03-21

    Wireless, wearable, inertial motion sensor technology introduces new possibilities for monitoring spinal motion and pain in people during their daily activities of work, rest and play. There are many types of these wireless devices currently available but the precision in measurement and the magnitude of measurement error from such devices is often unknown. This study investigated the concurrent validity of one inertial motion sensor system (ViMove) for its ability to measure lumbar inclination motion, compared with the Vicon motion capture system. To mimic the variability of movement patterns in a clinical population, a sample of 34 people were included - 18 with low back pain and 16 without low back pain. ViMove sensors were attached to each participant's skin at spinal levels T12 and S2, and Vicon surface markers were attached to the ViMove sensors. Three repetitions of end-range flexion inclination, extension inclination and lateral flexion inclination to both sides while standing were measured by both systems concurrently with short rest periods in between. Measurement agreement through the whole movement range was analysed using a multilevel mixed-effects regression model to calculate the root mean squared errors and the limits of agreement were calculated using the Bland Altman method. We calculated root mean squared errors (standard deviation) of 1.82° (±1.00°) in flexion inclination, 0.71° (±0.34°) in extension inclination, 0.77° (±0.24°) in right lateral flexion inclination and 0.98° (±0.69°) in left lateral flexion inclination. 95% limits of agreement ranged between -3.86° and 4.69° in flexion inclination, -2.15° and 1.91° in extension inclination, -2.37° and 2.05° in right lateral flexion inclination and -3.11° and 2.96° in left lateral flexion inclination. We found a clinically acceptable level of agreement between these two methods for measuring standing lumbar inclination motion in these two cardinal movement planes. Further research should investigate the ViMove system's ability to measure lumbar motion in more complex 3D functional movements and to measure changes of movement patterns related to treatment effects.

  16. Evidence for gain on the C VI 182 A transition in a radiation-cooled selenium/Formvar plasma

    NASA Technical Reports Server (NTRS)

    Seely, J. F.; Brown, C. M.; Feldman, U.; Richardson, M.; Behring, W. E.

    1985-01-01

    Thin plastic foils coated with selenium have been irradiated using from 4 to 8 beams of the OMEGA laser in a line focus configuration. Spectra were recorded using a 3 meter spectrograph that viewed the plasma along the line focus. Based on a comparison of the intensities of the spectral lines from plasmas with lengths of 1.7, 3.4, 6.8, and 13.6 mm, the C VI n = 3 to 2 transition at 182 A was anomalously intense in the spectra from the longer plasmas. Calculations indicate that the carbon plasma was cooled by radiation from the highly-charged selenium plasma in a time that was smaller than the expansion time of the plasma. These plasma conditions are favorable for the occurrence of population inversions between the n = 2 and 3 levels of C VI resulting from recombination and cascading from higher levels. The measured gain coefficient for the C VI 182 A transition is 3/cm, and this corresponds to a gain-length product of 4 in the longest plasma.

  17. 12 CFR Appendix M1 to Part 1026 - Repayment Disclosures

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... terms of a cardholder's account that will expire in a fixed period of time, as set forth by the card... estimates. (1) Minimum payment formulas. When calculating the minimum payment repayment estimate, card... calculate the minimum payment amount for special purchases, such as a “club plan purchase.” Also, assume...

  18. 12 CFR Appendix M1 to Part 1026 - Repayment Disclosures

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... terms of a cardholder's account that will expire in a fixed period of time, as set forth by the card... estimates. (1) Minimum payment formulas. When calculating the minimum payment repayment estimate, card... calculate the minimum payment amount for special purchases, such as a “club plan purchase.” Also, assume...

  19. Molecular Modeling in Drug Design for the Development of Organophosphorus Antidotes/Prophylactics.

    DTIC Science & Technology

    1985-08-01

    10 1. INTERFACING OF PROGRAMS ......................... 10 2. PARAMETERIZATION OF ALLINGERS MM2 PROGRAM ....... 11 3. MUSCARINIC AGONISTS...CALCULATION OF PARTIAL CHARGES ..................... 45 10. DERIVATIONOF ELECTROSTATIC POTENTIAL CONTOURS... 53 CONCLUSIONS...60 APPENDIX A - MNDO CHARGE CALCULATIONS ..................... 62 6mwwm &&A-Q- 5.- FIGURES PAGE FIGURE 1 - CHOLINERGIC RECEPTOR MODEL OF KIER

  20. 12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... may or may not occur in the future. These formulas apply to both dividend-bearing and interest-bearing... by the formula shown below. Credit unions may calculate the annual percentage yield using projected... the formula, credit unions shall assume that all principal and dividends remain on deposit for the...

  1. 12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... may or may not occur in the future. These formulas apply to both dividend-bearing and interest-bearing... by the formula shown below. Credit unions may calculate the annual percentage yield using projected... the formula, credit unions shall assume that all principal and dividends remain on deposit for the...

  2. 12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... may or may not occur in the future. These formulas apply to both dividend-bearing and interest-bearing... by the formula shown below. Credit unions may calculate the annual percentage yield using projected... the formula, credit unions shall assume that all principal and dividends remain on deposit for the...

  3. 12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... may or may not occur in the future. These formulas apply to both dividend-bearing and interest-bearing... by the formula shown below. Credit unions may calculate the annual percentage yield using projected... the formula, credit unions shall assume that all principal and dividends remain on deposit for the...

  4. Calculation Package: Derivation of Facility-Specific Derived Air Concentration (DAC) Values in Support of Spallation Neutron Source Operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McLaughlin, David A

    Derived air concentration (DAC) values for 175 radionuclides* produced at the Oak Ridge National Laboratory (ORNL) Spallation Neutron Source (SNS), but not listed in Appendix A of 10 CFR 835 (01/01/2009 version), are presented. The proposed DAC values, ranging between 1 E-07 {micro}Ci/mL and 2 E-03 {micro}Ci/mL, were calculated in accordance with the recommendations of the International Commission on Radiological Protection (ICRP), and are intended to support an exemption request seeking regulatory relief from the 10 CFR 835, Appendix A, requirement to apply restrictive DACs of 2E-13 {micro}Ci/mL and 4E-11 {micro}Ci/mL and for non-listed alpha and non-alpha-emitting radionuclides, respectively.

  5. Structural and electronic properties of monolayer group III monochalcogenides

    NASA Astrophysics Data System (ADS)

    Demirci, S.; Avazlı, N.; Durgun, E.; Cahangirov, S.

    2017-03-01

    We investigate the structural, mechanical, and electronic properties of the two-dimensional hexagonal structure of group III-VI binary monolayers, M X (M =B , Al, Ga, In and X =O , S, Se, Te) using first-principles calculations based on the density functional theory. The structural optimization calculations and phonon spectrum analysis indicate that all of the 16 possible binary compounds are thermally stable. In-plane stiffness values cover a range depending on the element types and can be as high as that of graphene, while the calculated bending rigidity is found to be an order of magnitude higher than that of graphene. The obtained electronic band structures show that M X monolayers are indirect band-gap semiconductors. The calculated band gaps span a wide optical spectrum from deep ultraviolet to near infrared. The electronic structure of oxides (M O ) is different from the rest because of the high electronegativity of oxygen atoms. The dispersions of the electronic band edges and the nature of bonding between atoms can also be correlated with electronegativities of constituent elements. The unique characteristics of group III-VI binary monolayers can be suitable for high-performance device applications in nanoelectronics and optics.

  6. Quantum mechanical calculation of aqueuous uranium complexes: carbonate, phosphate, organic and biomolecular species

    PubMed Central

    Kubicki, James D; Halada, Gary P; Jha, Prashant; Phillips, Brian L

    2009-01-01

    Background Quantum mechanical calculations were performed on a variety of uranium species representing U(VI), U(V), U(IV), U-carbonates, U-phosphates, U-oxalates, U-catecholates, U-phosphodiesters, U-phosphorylated N-acetyl-glucosamine (NAG), and U-2-Keto-3-doxyoctanoate (KDO) with explicit solvation by H2O molecules. These models represent major U species in natural waters and complexes on bacterial surfaces. The model results are compared to observed EXAFS, IR, Raman and NMR spectra. Results Agreement between experiment and theory is acceptable in most cases, and the reasons for discrepancies are discussed. Calculated Gibbs free energies are used to constrain which configurations are most likely to be stable under circumneutral pH conditions. Reduction of U(VI) to U(IV) is examined for the U-carbonate and U-catechol complexes. Conclusion Results on the potential energy differences between U(V)- and U(IV)-carbonate complexes suggest that the cause of slower disproportionation in this system is electrostatic repulsion between UO2 [CO3]35- ions that must approach one another to form U(VI) and U(IV) rather than a change in thermodynamic stability. Calculations on U-catechol species are consistent with the observation that UO22+ can oxidize catechol and form quinone-like species. In addition, outer-sphere complexation is predicted to be the most stable for U-catechol interactions based on calculated energies and comparison to 13C NMR spectra. Outer-sphere complexes (i.e., ion pairs bridged by water molecules) are predicted to be comparable in Gibbs free energy to inner-sphere complexes for a model carboxylic acid. Complexation of uranyl to phosphorus-containing groups in extracellular polymeric substances is predicted to favor phosphonate groups, such as that found in phosphorylated NAG, rather than phosphodiesters, such as those in nucleic acids. PMID:19689800

  7. Exposure to hexavalent chromium in welders: Results of the WELDOX II field study.

    PubMed

    Pesch, Beate; Lehnert, Martin; Weiss, Tobias; Kendzia, Benjamin; Menne, Eleonore; Lotz, Anne; Heinze, Evelyn; Behrens, Thomas; Gabriel, Stefan; Schneider, Wolfgang; Brüning, Thomas

    2018-03-12

    Exposure to hexavalent chromium (Cr(VI)) has been primarily studied in chromate production. Here, we measured personal exposure to respirable Cr(VI) together with airborne and urinary Cr and Ni in welders to explore levels and associations between various measures of exposure. Shift concentrations of Cr(VI), Cr, and Ni were measured in respirable welding fumes in 50 men who used either gas metal arc welding (GMAW) (n = 24) or tungsten inert gas welding (TIG) (n = 19) as their major technique. Cr and Ni were determined in pre- and post-shift urine samples. Concentrations below the limit of quantification (LOQ) were multiply imputed. Spearman correlation coefficients (rs) were calculated with 95% confidence intervals (CIs) to explore associations between the exposure variables, and regression models were applied to estimate the effect of the parent metal on the urinary concentration. Regarding the respirable Cr(VI), 62% of the measurements were below the LOQ, the 75th percentile was 0.50 µg m-3, and 8 out of 50 (16%) welders exceeded 1 µg m-3. The highest shift concentration that occurred as a result of shielded metal arc welding (SMAW) was 180 µg m-3. The Cr(VI) content in total Cr ranged from 4 to 82% (median 20%), although the concentration correlated with total Cr (rs 0.55, 95% CI 0.46; 0.64). The correlation between Cr(VI) and Ni was weaker (rs 0.42, 95% CI 0.34; 0.51) than that between total Cr and Ni in welding fumes (rs 0.83, 95% CI 0.74; 0.92). Both Cr(VI) and total Cr influenced the urinary Cr concentrations in post-shift samples (P = 0.0008 and P ≤ 0.0001, respectively). The airborne shift exposure was a weaker determinant than the Cr content in pre-shift urine samples, which strongly correlated with post-shift urinary Cr (rs 0.78, 95% CI 0.69; 0.87). The Cr(VI) content in total Cr varied considerably in welding fumes. The majority of welders using GMAW or TIG presented with shift concentrations of respirable Cr(VI) below 1 µg m-3. However, very high Cr(VI) concentrations may occur, for example in SMAW. The urinary concentration of total Cr, cannot be used to precisely determine the shift concentration of respirable Cr(VI) in welders.

  8. Applying vegetation indices to detect high water table zones in humid warm-temperate regions using satellite remote sensing

    NASA Astrophysics Data System (ADS)

    Koide, Kaoru; Koike, Katsuaki

    2012-10-01

    This study developed a geobotanical remote sensing method for detecting high water table zones using differences in the conditions of forest trees induced by groundwater supply in a humid warm-temperate region. A new vegetation index (VI) termed added green band NDVI (AgbNDVI) was proposed to discriminate the differences. The AgbNDVI proved to be more sensitive to water stress on green vegetation than existing VIs, such as SAVI and EVI2, and possessed a strong linear correlation with the vegetation fraction. To validate a proposed vegetation index method, a 23 km2 study area was selected in the Tono region of Gifu prefecture, central Japan. The AgbNDVI values were calculated from atmospheric corrected SPOT HRV data. To correctly extract high VI points, the influence factors on forest tree growth were identified using the AgbNDVI values, DEM and forest type data; the study area was then divided into 555 domains chosen from a combination of the influence factors and forest types. Thresholds for extracting high VI points were defined for each domain based on histograms of AgbNDVI values. By superimposing the high VI points on topographic and geologic maps, most high VI points are clearly located on either concave or convex slopes, and are found to be proximal to geologic boundaries—particularly the boundary between the Pliocene gravel layer and the Cretaceous granite, which should act as a groundwater flow path. In addition, field investigations support the correctness of the high VI points, because they are located around groundwater seeps and in high water table zones where the growth increments and biomass of trees are greater than at low VI points.

  9. Comparative study of uranyl(VI) and -(V) carbonato complexes in an aqueous solution.

    PubMed

    Ikeda, Atsushi; Hennig, Christoph; Tsushima, Satoru; Takao, Koichiro; Ikeda, Yasuhisa; Scheinost, Andreas C; Bernhard, Gert

    2007-05-14

    Electrochemical, complexation, and electronic properties of uranyl(VI) and -(V) carbonato complexes in an aqueous Na2CO3 solution have been investigated to define the appropriate conditions for preparing pure uranyl(V) samples and to understand the difference in coordination character between UO22+ and UO2+. Cyclic voltammetry using three different working electrodes of platinum, gold, and glassy carbon has suggested that the electrochemical reaction of uranyl(VI) carbonate species proceeds quasi-reversibly. Electrolysis of UO22+ has been performed in Na2CO3 solutions of more than 0.8 M with a limited pH range of 11.7 < pH < 12.0 using a platinum mesh electrode. It produces a high purity of the uranyl(V) carbonate solution, which has been confirmed to be stable for at least 2 weeks in a sealed glass cuvette. Extended X-ray absorption fine structure (EXAFS) measurements revealed the structural arrangement of uranyl(VI) and -(V) tricarbonato complexes, [UO2(CO3)3]n- [n = 4 for uranyl(VI), 5 for uranyl(V)]. The bond distances of U-Oax, U-Oeq, U-C, and U-Odist are determined to be 1.81, 2.44, 2.92, and 4.17 A for the uranyl(VI) complex and 1.91, 2.50, 2.93, and 4.23 A for the uranyl(V) complex, respectively. The validity of the structural parameters obtained from EXAFS has been supported by quantum chemical calculations for the uranyl(VI) complex. The uranium LI- and LIII-edge X-ray absorption near-edge structure spectra have been interpreted in terms of electron transitions and multiple-scattering features.

  10. Simulation of the Thermal Response of Externally Cooled Ordnance Engulfed in Large Aviation Fuel Fires

    DTIC Science & Technology

    1990-09-01

    400j.GE T (Io 1Q0 .(MELT ViH N- T ?A( 11 3 7( 2,( 1 TBEFORE AVG TEMP(OF) L] SIDE INTERFACE TE.M1P CALCULATE THERMAL CONDUCTIVITY CALCULATION | L... ISTE a AVG TEMP EXPLOSIVE SIDE OF INTERFACE AE-0 SLIU INT 00726 ENERGY GENERATED IS. (INT).LT. T •ELT(EXPL) T 0 EI"E’rNG I CALCULATE NEWl TEMP WIlTH

  11. Design and test of voltage and current probes for EAST ICRF antenna impedance measurement

    NASA Astrophysics Data System (ADS)

    Jianhua, WANG; Gen, CHEN; Yanping, ZHAO; Yuzhou, MAO; Shuai, YUAN; Xinjun, ZHANG; Hua, YANG; Chengming, QIN; Yan, CHENG; Yuqing, YANG; Guillaume, URBANCZYK; Lunan, LIU; Jian, CHENG

    2018-04-01

    On the experimental advanced superconducting tokamak (EAST), a pair of voltage and current probes (V/I probes) is installed on the ion cyclotron radio frequency transmission lines to measure the antenna input impedance, and supplement the conventional measurement technique based on voltage probe arrays. The coupling coefficients of V/I probes are sensitive to their sizes and installing locations, thus they should be determined properly to match the measurement range of data acquisition card. The V/I probes are tested in a testing platform at low power with various artificial loads. The testing results show that the deviation of coupling resistance is small for loads R L > 2.5 Ω, while the resistance deviations appear large for loads R L < 1.5 Ω, which implies that the power loss cannot be neglected at high VSWR. As the factors that give rise to the deviation of coupling resistance calculation, the phase measurement error is the more significant factor leads to deleterious results rather than the amplitude measurement error. To exclude the possible ingredients that may lead to phase measurement error, the phase detector can be calibrated in steady L-mode scenario and then use the calibrated data for calculation under H-mode cases in EAST experiments.

  12. Development of an Aeroelastic Analysis Including a Viscous Flow Model

    NASA Technical Reports Server (NTRS)

    Keith, Theo G., Jr.; Bakhle, Milind A.

    2001-01-01

    Under this grant, Version 4 of the three-dimensional Navier-Stokes aeroelastic code (TURBO-AE) has been developed and verified. The TURBO-AE Version 4 aeroelastic code allows flutter calculations for a fan, compressor, or turbine blade row. This code models a vibrating three-dimensional bladed disk configuration and the associated unsteady flow (including shocks, and viscous effects) to calculate the aeroelastic instability using a work-per-cycle approach. Phase-lagged (time-shift) periodic boundary conditions are used to model the phase lag between adjacent vibrating blades. The direct-store approach is used for this purpose to reduce the computational domain to a single interblade passage. A disk storage option, implemented using direct access files, is available to reduce the large memory requirements of the direct-store approach. Other researchers have implemented 3D inlet/exit boundary conditions based on eigen-analysis. Appendix A: Aeroelastic calculations based on three-dimensional euler analysis. Appendix B: Unsteady aerodynamic modeling of blade vibration using the turbo-V3.1 code.

  13. An upper limit on interstellar C IV in the spectrum of gamma-2 Velorum

    NASA Technical Reports Server (NTRS)

    Lengyel-Frey, D.; Stecher, T. P.; West, D. K.

    1975-01-01

    An upper limit on the column density of C IV along the line of sight to gamma-2 Vel is derived from upper limits placed on the equivalent widths of the interstellar C IV doublet with rest wavelengths at 1548.20 A and 1550.77 A. A lower limit of 250,000 K is calculated for the electron temperature of O VI emitting regions by combining the C IV results with a measurement of the column density of interstellar O VI for the same star and using calculations for the relative ionization of some abundant elements as a function of electron temperature in a low-density plasma. Since gamma-2 Vel is in the central part of the Gum Nebula, the high temperature suggested by these results is shown to support the idea that a high-temperature phase of the interstellar medium, possibly maintained by supernova explosions, may exist.-

  14. Effects of the Application of the New Nuclear Data Library ENDF/B to the Criticality Analysis of AP1000

    NASA Astrophysics Data System (ADS)

    Kuntoro, Iman; Sembiring, T. M.; Susilo, Jati; Deswandri; Sunaryo, G. R.

    2018-02-01

    Calculations of criticality of the AP1000 core due to the use of new edition of nuclear data library namely ENDF/B-VII and ENDF/B-VII.1 have been done. This work is aimed to know the accuracy of ENDF/B-VII.1 compared to ENDF/B-VII and ENDF/B-VI.8. in determining the criticality parameter of AP1000. Analysis ws imposed to core at cold zero power (CZP) conditions. The calculations have been carried out by means of MCNP computer code for 3 dimension geometry. The results show that criticality parameter namely effective multiplication factor of the AP1000 core are higher than that ones resulted from ENDF/B-VI.8 with relative differences of 0.39% for application of ENDF/B-VII and of 0.34% for application of ENDF/B-VII.1.

  15. Assessment of the chemical status of the alluvial aquifer in the Aosta Plain: an example of the implementation of the Water Framework Directive in Italy

    NASA Astrophysics Data System (ADS)

    Rotiroti, Marco; Fumagalli, Letizia; Stefania, Gennaro A.; Frigerio, Maria C.; Simonetto, Fulvio; Capodaglio, Pietro; Bonomi, Tullia

    2015-04-01

    The Italian Legislative Decree 30/09 (D.Lgs. 30/09) implements the EU Water Framework Directive (WFD) providing some technical guidelines to assess the chemical status of groundwater bodies. This work presents the estimation of the chemical status of the shallow aquifer in the Aosta Plain (Aosta Valley Region, NW Alpine sector, Italy) on the basis of the D.Lgs. 30/09. The study area covers ~40 km2 along the Dora Baltea River basin. The Aosta Plain hosts an alluvial aquifer formed of lacustrine, glacial, fluvio-glacial and fan deposits of Pleistocene and Holocene ages. The unconfined aquifer features a depth of ~80 m in the western part of the plain and ~20 in the eastern part due to the intercalation of a silty lacustrine layer. The aquifer is mainly recharged by precipitation, surface water and ice and snow melt. Previous studies revealed that SO4, Fe, Mn, Ni, Cr(VI) and PCE represent potential threats for groundwater quality in the Aosta Plain. The chemical status was calculated using the data collected during the 2012 by the Regional Environmental Protection Agency of the Aosta Valley Region from its groundwater quality monitoring network that includes 38 points. Each point was sampled up to four times. Since the D.Lgs. 30/09 excludes Fe and Mn from the assessment of the groundwater chemical status, the present work deals with SO4, Ni, Cr(VI) and PCE. Threshold values (TVs) were estimated on the basis of natural background levels (NBLs) for SO4, Ni and Cr(VI) whereas, for PCE, the reference value (REF) reported by the D.Lgs. 30/09 (i.e., 1.1 µg/L) was used as TV. The NBLs were calculated using the two approaches suggested by the EU research project BRIDGE, that are the pre-selection and the component separation. The TVs were evaluated using the following criteria: (a) if NBL < REF, then TV = (REF+NBL)/2 and (b) if NBL ≥ REF, then TV = NBL. The average between the NBL resulted from the pre-selection and the component separation was used in the TV estimation. Finally, the chemical status was defined comparing the annual average concentration in each monitoring point to the TV: if more than 20% of sampling points exceeded the TV for at least one chemical parameter then the chemical status was defined as poor, otherwise the status was defined as good. The NBLs resulted of 10.1 µg/L, 1.8 µg/L and 115 mg/L from pre-selection and 9.4 µg/L, 2.3 µg/L and 148 mg/L from component separation for Ni, Cr(VI) and SO4, respectively. The TVs calculated are 15 µg/L, 3.6 µg/L and 191 mg/L for Ni, Cr(VI) and SO4, respectively. The percentages of sampling points exceeding the TV were 5.3, 23.7, 5.3 and 2.7 for Ni, Cr(VI), SO4 and PCE, therefore the groundwater chemical status in the Aosta Plain in 2012 resulted poor due to the high concentration of Cr(VI). This work underlines the necessity for remediation strategies to reduce the Cr(VI) pollution in the Aosta Plain in order to achieve the good chemical status as required by the WFD.

  16. Static noise tests on augmentor wing jet STOL research aircraft (C8A Buffalo)

    NASA Technical Reports Server (NTRS)

    Marrs, C. C.; Harkonen, D. L.; Okeefe, J. V.

    1974-01-01

    Results are presented for full scale ground static acoustic tests of over-area conical nozzles and a lobe nozzle installed on the Augmentor Wing Jet STOL Research Aircraft, a modified C8A Buffalo. The noise levels and spectrums of the test nozzles are compared against those of the standard conical nozzle now in use on the aircraft. Acoustic evaluations at 152 m (500 ft), 304 m (1000 ft), and 1216 m (4000 ft) are made at various engine power settings with the emphasis on approach and takeoff power. Appendix A contains the test log and propulsion calculations. Appendix B gives the original test plan, which was closely adhered to during the test. Appendix C describes the acoustic data recording and reduction systems, with calibration details.

  17. Surface stability and the selection rules of substrate orientation for optimal growth of epitaxial II-VI semiconductors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yin, Wan-Jian; Department of Physics & Astronomy, and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo, Ohio 43606; Yang, Ji-Hui

    2015-10-05

    The surface structures of ionic zinc-blende CdTe (001), (110), (111), and (211) surfaces are systematically studied by first-principles density functional calculations. Based on the surface structures and surface energies, we identify the detrimental twinning appearing in molecular beam epitaxy (MBE) growth of II-VI compounds as the (111) lamellar twin boundaries. To avoid the appearance of twinning in MBE growth, we propose the following selection rules for choosing optimal substrate orientations: (1) the surface should be nonpolar so that there is no large surface reconstructions that could act as a nucleation center and promote the formation of twins; (2) the surfacemore » structure should have low symmetry so that there are no multiple equivalent directions for growth. These straightforward rules, in consistent with experimental observations, provide guidelines for selecting proper substrates for high-quality MBE growth of II-VI compounds.« less

  18. Peculiar Piezoelectricity in Two-Dimensional Materials

    NASA Astrophysics Data System (ADS)

    Sevik, Cem; Cakir, Deniz; Gulseren, Oguz; Peeters, Francois M.

    Recently, two dimensional materials with noncentrosymmetric structure have received significant interest due to their potential usage in piezoelectric applications. It has been reported by first principles calculations that relaxed-ion piezoelectric strain (d11) and stress (e11) coefficients of some transition metal dichalcogenide (TMDC) monolayers are comparable or even better than that of conventional bulk piezoelectric materials. Furthermore, e11 coefficient of MoS2 has been measured as 2.9 .10-10 C/m, which agrees well with the theoretical calculations. In order to deeply investigate this potential, we have performed first-principles calculations and systematically investigated the piezoelectric properties of various single layer structures: TMDCs, transition metal oxides, and hexagonal group II-VI compounds. The results clearly show that not only the Mo- and W-based TMDCs but also the other materials with Cr, Ti, Zr and Sn exhibit highly promising piezoelectric properties. Moreover, d11coefficient of some II-VI compounds have been predicted as quite larger than that of TMDCs and the bulk materials, α-quartz, w-GaN, and w-AlN which are widely used in applications.

  19. 12 CFR Appendix A to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Risk-Based Measure

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL... Supervisors' Committee) and endorsed by the Group of Ten Central Bank Governors. The framework is described in...-weighted assets, calculate market risk equivalent assets, and calculate risk-based capital ratios adjusted...

  20. 34 CFR 12.10 - How is a Public Benefit Allowance (PBA) calculated?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false How is a Public Benefit Allowance (PBA) calculated? 12.10 Section 12.10 Education Office of the Secretary, Department of Education DISPOSAL AND UTILIZATION... under appendix A: (1) Entity A is a specialized school that has had a building destroyed by fire, and...

  1. 12 CFR Appendix A to Part 230 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... following simple formula: APY=100 (Interest/Principal) Examples (1) If an institution pays $61.68 in... percentage yield is 5.39%, using the simple formula: APY=100(134.75/2,500) APY=5.39% For $15,000, interest is... Yield Calculation The annual percentage yield measures the total amount of interest paid on an account...

  2. 12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the member to open, maintain, increase or renew an account. Dividends, interest or other earnings are... may or may not occur in the future. These formulas apply to both dividend-bearing and interest-bearing... not have a stated maturity), the APY can be calculated by use of the following simple formula: APY=100...

  3. 24 CFR Appendix to Part 972 - Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... justified by a newly created property-based needs assessment (a life-cycle physical needs assessments... calculated as the sum of total operating cost, modernization cost, and costs to address accrual needs. Costs... assist PHAs in completing the assessments. The spreadsheet calculator is designed to walk housing...

  4. 24 CFR Appendix to Part 972 - Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... justified by a newly created property-based needs assessment (a life-cycle physical needs assessments... calculated as the sum of total operating cost, modernization cost, and costs to address accrual needs. Costs... assist PHAs in completing the assessments. The spreadsheet calculator is designed to walk housing...

  5. 12 CFR Appendix A to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Risk-Based Measure

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL... Supervisors' Committee) and endorsed by the Group of Ten Central Bank Governors. The framework is described in...-weighted assets, calculate market risk equivalent assets, and calculate risk-based capital ratios adjusted...

  6. 12 CFR Appendix A to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Risk-Based Measure

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL... Supervisors' Committee) and endorsed by the Group of Ten Central Bank Governors. The framework is described in...-weighted assets, calculate market risk equivalent assets, and calculate risk-based capital ratios adjusted...

  7. 12 CFR Appendix A to Part 208 - Capital Adequacy Guidelines for State Member Banks: Risk-Based Measure

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... control over the entity makes it the functional equivalent of a subsidiary), or otherwise require the bank...) and endorsed by the Group of Ten Central Bank Governors. The framework is described in a paper... qualifying and excess capital, calculate risk-weighted assets, calculate market risk equivalent assets, and...

  8. 10 CFR Appendix B1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Freezers

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... defrost control. The energy consumption in kilowatt-hours per day shall be calculated equivalent to: ET... though the consumer-activated compartment temperature controls were preset so that the desired... calculated effect of operating a freezer for a period of 24 hours with the consumer-activated controls other...

  9. Remedial Investigation Badger Army Ammunition Plant, Baraboo, Wisconsin. Volume 2. Appendices D.2 Through F

    DTIC Science & Technology

    1991-01-01

    FILES FOR COMPOUNDS OF POTENTIAL CONCERN Vol. 7 APPENDIX 0 - HUMAN HEALTH RISK CALCULATIONS Vol. 7 APPENDIX P - INVENTORY OF SITE SPECIES Vol. 7...Driing Mud 0" 0 3 am 01 99 5 .Annula space seal:- GnmuldBsuryoni 0 33 Lbs/gal mud weight ... Benuar-siid shiny 3 33 16. Driling addives used 13 yesLbs...CONSTRUCTION REPORT / 5 WISCONSIN STATE BOARD OF HEALTH WELL DRILLING DIVISION JUL 11 |W Note: Section 32 of the Wisconsin Well Drilling Sanitary Code

  10. Consistent Practices for the Probability of Detection (POD) of Fracture Critical Metallic Components Project

    NASA Technical Reports Server (NTRS)

    Hughitt, Brian; Generazio, Edward (Principal Investigator); Nichols, Charles; Myers, Mika (Principal Investigator); Spencer, Floyd (Principal Investigator); Waller, Jess (Principal Investigator); Wladyka, Jordan (Principal Investigator); Aldrin, John; Burke, Eric; Cerecerez, Laura; hide

    2016-01-01

    NASA-STD-5009 requires that successful flaw detection by NDE methods be statistically qualified for use on fracture critical metallic components, but does not standardize practices. This task works towards standardizing calculations and record retention with a web-based tool, the NNWG POD Standards Library or NPSL. Test methods will also be standardized with an appropriately flexible appendix to -5009 identifying best practices. Additionally, this appendix will describe how specimens used to qualify NDE systems will be cataloged, stored and protected from corrosion, damage, or loss.

  11. ON-LINE CALCULATOR: VAPOR INTRUSION MODELING

    EPA Science Inventory

    Migration of volatile chemicals from the subsurface into overlying buildings is called vapor intrusion (VI). Volatile organic chemicals in contaminated soils or groundwater can emit vapors, which may migrate through subsurface soils and may enter the indoor air of overlying build...

  12. Sigma Periodic Table Browse

    Science.gov Websites

    library. • Fission yields. • Pre-calculated integral quantities. • Improved zooming. New in version 3.0 , ENDF/B-VI.8 libraries. • Neutron cross section distributions (MF=3). • Experimental data in EXFOR

  13. Drug resistance-related mutations T369V/I in the connection subdomain of HIV-1 reverse transcriptase severely impair viral fitness.

    PubMed

    Wang, Zheng; Zhang, Junli; Li, Fan; Ji, Xiaolin; Liao, Lingjie; Ma, Liying; Xing, Hui; Feng, Yi; Li, Dan; Shao, Yiming

    2017-04-02

    Fitness is a key parameter in the measurement of transmission capacity of individual drug-resistant HIV. Drug-resistance related mutations (DRMs) T369V/I and A371V in the connection subdomain (CN) of reverse transcriptase (RT) occur at higher frequencies in the individuals experiencing antiretroviral therapy failure. Here, we evaluated the effects of T369V/I and A371V on viral fitness, in the presence or in the absence of thymidine analogue resistance-associated mutations (TAMs) and assessed the effect of potential RT structure-related mechanism on change in viral fitness. Mutations T369V/I, A371V, alone or in combination with TAMs were introduced into a modified HIV-1 infectious clone AT1 by site-directed mutagenesis. Then, experiments on mutant and wild-type virus AT2 were performed separately using a growth-competition assay, and then the relative fitness was calculated. Structural analysis of RT was conducted using Pymol software. Results showed that T369V/I severely impaired the relative virus fitness, and A371V compensated for the viral fitness reduction caused by TAMs. Structural modeling of RT suggests that T369V/I substitutions disrupt powerful hydrogen bonds formed by T369 and V365 in p51 and p66. This study indicates that the secondary DRMs within CN might efficiently damage viral fitness, and provides valuable information for clinical surveillance and prevention of HIV-1 strains carrying these DRMs. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. The U(VI) speciation influenced by a novel Paenibacillus isolate from Mont Terri Opalinus clay.

    PubMed

    Lütke, Laura; Moll, Henry; Bachvarova, Velina; Selenska-Pobell, Sonja; Bernhard, Gert

    2013-05-21

    Bacterial cell walls have a high density of ionizable functional groups available for U(VI) binding, hence have a great potential to affect the speciation of this contaminant in the environment. The studied strain of the genus Paenibacillus is a novel isolate originating from the Mont Terri Opalinus clay formations (Switzerland) which are currently investigated as a potential host rock for future nuclear waste storage. U(VI) binding to the cell surface functional groups was studied by potentiometry combined with time-resolved laser-induced fluorescence spectroscopy (TRLFS). Four bacterial U(VI) surface complexes were identified: R-COO-UO2(+), R-O-PO3-UO2, R-O-PO3H-UO2(+), and (R-O-PO3)2-UO2(2-). The corresponding complex stability constants were calculated to be 5.33 ± 0.08, 8.89 ± 0.04, 12.92 ± 0.05, and 13.62 ± 0.08, respectively. Hence UO2(2+) displays a moderate to strong interaction with the bacterial surface functional groups. In the acidic pH range (pH 3) UO2(2+) binding onto the cell envelope is governed by coordination to hydrogen phosphoryl sites. Upon increasing the pH an increasing coordination of UO2(2+) to carboxylic and deprotonated phosphoryl sites was found. At a pH greater than 7 uranyl hydroxides dominate the speciation. Additionally the bacteria-mediated release of inorganic phosphate in dependence on [U(VI)] at different pH values was studied to assess the influence of phosphate release on U(VI) mobilization.

  15. Scale-Dependent Rates of Uranyl Surface Complexation Reaction in Sediments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Chongxuan; Shang, Jianying; Kerisit, Sebastien N.

    Scale-dependency of uranyl[U(VI)] surface complexation rates was investigated in stirred flow-cell and column systems using a U(VI)-contaminated sediment from the US Department of Energy, Hanford site, WA. The experimental results were used to estimate the apparent rate of U(VI) surface complexation at the grain-scale and in porous media. Numerical simulations using molecular, pore-scale, and continuum models were performed to provide insights into and to estimate the rate constants of U(VI) surface complexation at the different scales. The results showed that the grain-scale rate constant of U(VI) surface complexation was over 3 to 10 orders of magnitude smaller, dependent on themore » temporal scale, than the rate constant calculated using the molecular simulations. The grain-scale rate was faster initially and slower with time, showing the temporal scale-dependency. The largest rate constant at the grain-scale decreased additional 2 orders of magnitude when the rate was scaled to the porous media in the column. The scaling effect from the grain-scale to the porous media became less important for the slower sorption sites. Pore-scale simulations revealed the importance of coupled mass transport and reactions in both intragranular and inter-granular domains, which caused both spatial and temporal dependence of U(VI) surface complexation rates in the sediment. Pore-scale simulations also revealed a new rate-limiting mechanism in the intragranular porous domains that the rate of coupled diffusion and surface complexation reaction was slower than either process alone. The results provided important implications for developing models to scale geochemical/biogeochemical reactions.« less

  16. Appendectomy: Surgical Removal of the Appendix

    MedlinePlus

    ... Risk Calculator at http://riskcalculator.facs.org/online. 4 AMERICAN COLLEGE OF SURGEONS • SURGICAL PATIENT EDUCATION • www.facs.org/patienteducation Expectations: Preparing for Yo ur Operation Appendectomy SAMPLE Preparing for Your Operation ...

  17. 49 CFR Appendix to Part 531 - Example of Calculating Compliance Under § 531.5(c)

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL...) Assume a hypothetical manufacturer (Manufacturer X) produces a fleet of domestic passenger automobiles in...

  18. 49 CFR Appendix to Part 531 - Example of Calculating Compliance Under § 531.5(c)

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL...) Assume a hypothetical manufacturer (Manufacturer X) produces a fleet of domestic passenger automobiles in...

  19. 40 CFR 89.6 - Reference materials.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... July 1, 2009), Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity), IBR approved for appendix A to subpart D. (6) ASTM D613-95, Standard Test...

  20. 40 CFR 89.6 - Reference materials.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... July 1, 2009), Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity), IBR approved for appendix A to subpart D. (6) ASTM D613-95, Standard Test...

  1. 40 CFR 89.6 - Reference materials.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... July 1, 2009), Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity), IBR approved for appendix A to subpart D. (6) ASTM D613-95, Standard Test...

  2. Flood and Coastal Storm Damage Reduction Program. Beach-fx User’s Manual: Version 1.0

    DTIC Science & Technology

    2009-08-01

    Shapefile Import Template Attribute Fields ............................................................. 103 Appendix B: General Description of Output...Reordering map players . ....................................................................................................... 24 Figure 20. Map display...94 Figure 68. Field calculator

  3. Surface Engineering of PAMAM-SDB Chelating Resin with Diglycolamic Acid (DGA) Functional Group for Efficient Sorption of U(VI) and Th(IV) from Aqueous Medium.

    PubMed

    Ilaiyaraja, P; Deb, A K Singha; Ponraju, D; Ali, Sk Musharaf; Venkatraman, B

    2017-04-15

    A novel chelating resin obtained via growth of PAMAM dendron on surface of styrene divinyl benzene resin beads, followed by diglycolamic acid functionalization of the dendrimer terminal. Batch experiments were conducted to study the effects of pH, nitric acid concentration, amount of adsorbent, shaking time, initial metal ion concentration and temperature on U(VI) and Th(IV) adsorption efficiency. Diglycolamic acid terminated PAMAM dendrimer functionalized styrene divinylbenzene chelating resin (DGA-PAMAM-SDB) is found to be an efficient candidate for the removal of U(VI) and Th(IV) ions from aqueous (pH >4) and nitric acid media (>3M). The sorption equilibrium could be reached within 60min, and the experimental data fits with pseudo-second-order model. Langmuir sorption isotherm model correlates well with sorption equilibrium data. The maximum U(VI) and Th(IV) sorption capacity onto DGA-PAMAMG 5 -SDB was estimated to be about 682 and 544.2mgg -1 respectively at 25°C. The interaction of actinides and chelating resin is reversible and hence, the resin can be regenerated and reused. DFT calculation on the interaction of U(VI) and Th(IV) ions with chelating resin validates the experimental findings. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. SU-E-T-50: Automatic Validation of Megavoltage Beams Modeled for Clinical Use in Radiation Therapy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Melchior, M; Salinas Aranda, F; 21st Century Oncology, Ft. Myers, FL

    2014-06-01

    Purpose: To automatically validate megavoltage beams modeled in XiO™ 4.50 (Elekta, Stockholm, Sweden) and Varian Eclipse™ Treatment Planning Systems (TPS) (Varian Associates, Palo Alto, CA, USA), reducing validation time before beam-on for clinical use. Methods: A software application that can automatically read and analyze DICOM RT Dose and W2CAD files was developed using MatLab integrated development environment.TPS calculated dose distributions, in DICOM RT Dose format, and dose values measured in different Varian Clinac beams, in W2CAD format, were compared. Experimental beam data used were those acquired for beam commissioning, collected on a water phantom with a 2D automatic beam scanningmore » system.Two methods were chosen to evaluate dose distributions fitting: gamma analysis and point tests described in Appendix E of IAEA TECDOC-1583. Depth dose curves and beam profiles were evaluated for both open and wedged beams. Tolerance parameters chosen for gamma analysis are 3% and 3 mm dose and distance, respectively.Absolute dose was measured independently at points proposed in Appendix E of TECDOC-1583 to validate software results. Results: TPS calculated depth dose distributions agree with measured beam data under fixed precision values at all depths analyzed. Measured beam dose profiles match TPS calculated doses with high accuracy in both open and wedged beams. Depth and profile dose distributions fitting analysis show gamma values < 1. Relative errors at points proposed in Appendix E of TECDOC-1583 meet therein recommended tolerances.Independent absolute dose measurements at points proposed in Appendix E of TECDOC-1583 confirm software results. Conclusion: Automatic validation of megavoltage beams modeled for their use in the clinic was accomplished. The software tool developed proved efficient, giving users a convenient and reliable environment to decide whether to accept or not a beam model for clinical use. Validation time before beam-on for clinical use was reduced to a few hours.« less

  5. Where Are the Baryons? III. Nonequilibrium Effects and Observables

    NASA Astrophysics Data System (ADS)

    Cen, Renyue; Fang, Taotao

    2006-10-01

    A significant fraction (40%-50%) of baryons at the present epoch are predicted to be shock-heated to the warm-hot intergalactic medium (WHIM) by our previous numerical simulations. Here we recompute the evolution of the WHIM with several major improvements: (1) galactic superwind feedback processes from galaxy and star formation are explicitly included; (2) major metal species (O V to O IX) are computed explicitly in a nonequilibrium way; and (3) mass and spatial dynamic ranges are larger by factors of 8 and 2, respectively, than in our previous simulations. We find the following: (1) Nonequilibrium calculations produce significantly different results than do ionization equilibrium calculations. (2) The abundance of O VI absorption lines based on nonequilibrium simulations with galactic superwinds is in remarkably good agreement with the latest observations, strongly validating our model, while the predicted abundances for O VII and O VIII absorption lines appear to be lower than the still very uncertain observations. The expected abundances for O VI (as well as Lyα), O VII, and O VIII absorption systems are in the range 50-100 per unit redshift at equivalent width EW=1 km s-1, decreasing to 10-20 per unit redshift at EW=10 km s-1, to one to three lines for O VII and O VIII and negligible for O VI at EW>100 km s-1. (3) Emission lines, primarily O VI and Lyα in the UV and O VII and O VIII in soft X-rays, are potentially observable by future missions, and different lines provide complementary probes of the WHIM in the temperature-density-metallicity phase space. The number of emission lines per unit redshift that may be detectable by planned UV and soft X-ray missions are of order 0.1-1.

  6. HPLC separation post-column reaction, UV-visible and fluorescence detection of trace UO/sub 2//sup 2 +//U/sup 4 +/ species in aqueous solutions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Karimi, A.R.

    In this study a method for the measurement of uranium in natural waters at sub-ppB concentration levels by the separation and determination of U/sup 4 +/ and UO/sub 2//sup 2 +/ species is proposed. Reversed phase high performance liquid chromatography, followed by a post-column reaction and a sensitive UV-visible detection system was the method of choice to determine qualitatively and quantitatively the two uranium species. Also a cation-exchange and fluorescence detection system was studied for separation and determination of UO/sub 2//sup 2 +/ ions. Uranyl ion was selectively complexed with L-phenylalanine moetie in the sample solution containing U/sup 4 +/more » ions. Uranium (IV)/U(VI)-ligand was separated on a C/sub 18/ column with acetate buffer. Hexanesulfonate was found to be the choice for ion-pair reagent. The separation was best done with the acetate buffer at .01 M concentration and pH of 3.5. Absorption of the two species were measured after a post-column reaction with Arsenazo-III. Chromatographic parameters were calculated and a calibration curves were constructed. The detection limit for the procedure was 0.7 ..mu..g/mo and 1.2..mu..g/ml for U(IV) and U(VI) respectively. When U(VI) was separated on the cation-exchange column the limit of detection was calculated to be 1 ..mu..g/ml. The direct fluorometric method for U(VI) measurement results in a detection limit of 2 ppB and upper concentration limit of 2 ppM. The effect of interfering ions in the direct method of determination could be eliminated by dilution of sample solution.« less

  7. Bayesian Probability Theory

    NASA Astrophysics Data System (ADS)

    von der Linden, Wolfgang; Dose, Volker; von Toussaint, Udo

    2014-06-01

    Preface; Part I. Introduction: 1. The meaning of probability; 2. Basic definitions; 3. Bayesian inference; 4. Combinatrics; 5. Random walks; 6. Limit theorems; 7. Continuous distributions; 8. The central limit theorem; 9. Poisson processes and waiting times; Part II. Assigning Probabilities: 10. Transformation invariance; 11. Maximum entropy; 12. Qualified maximum entropy; 13. Global smoothness; Part III. Parameter Estimation: 14. Bayesian parameter estimation; 15. Frequentist parameter estimation; 16. The Cramer-Rao inequality; Part IV. Testing Hypotheses: 17. The Bayesian way; 18. The frequentist way; 19. Sampling distributions; 20. Bayesian vs frequentist hypothesis tests; Part V. Real World Applications: 21. Regression; 22. Inconsistent data; 23. Unrecognized signal contributions; 24. Change point problems; 25. Function estimation; 26. Integral equations; 27. Model selection; 28. Bayesian experimental design; Part VI. Probabilistic Numerical Techniques: 29. Numerical integration; 30. Monte Carlo methods; 31. Nested sampling; Appendixes; References; Index.

  8. Uranyl adsorption and surface speciation at the imogolite-water interface: Self-consistent spectroscopic and surface complexation models

    USGS Publications Warehouse

    Arai, Y.; McBeath, M.; Bargar, J.R.; Joye, J.; Davis, J.A.

    2006-01-01

    Macro- and molecular-scale knowledge of uranyl (U(VI)) partitioning reactions with soil/sediment mineral components is important in predicting U(VI) transport processes in the vadose zone and aquifers. In this study, U(VI) reactivity and surface speciation on a poorly crystalline aluminosilicate mineral, synthetic imogolite, were investigated using batch adsorption experiments, X-ray absorption spectroscopy (XAS), and surface complexation modeling. U(VI) uptake on imogolite surfaces was greatest at pH ???7-8 (I = 0.1 M NaNO3 solution, suspension density = 0.4 g/L [U(VI)]i = 0.01-30 ??M, equilibration with air). Uranyl uptake decreased with increasing sodium nitrate concentration in the range from 0.02 to 0.5 M. XAS analyses show that two U(VI) inner-sphere (bidentate mononuclear coordination on outer-wall aluminol groups) and one outer-sphere surface species are present on the imogolite surface, and the distribution of the surface species is pH dependent. At pH 8.8, bis-carbonato inner-sphere and tris-carbonato outer-sphere surface species are present. At pH 7, bis- and non-carbonato inner-sphere surface species co-exist, and the fraction of bis-carbonato species increases slightly with increasing I (0.1-0.5 M). At pH 5.3, U(VI) non-carbonato bidentate mononuclear surface species predominate (69%). A triple layer surface complexation model was developed with surface species that are consistent with the XAS analyses and macroscopic adsorption data. The proton stoichiometry of surface reactions was determined from both the pH dependence of U(VI) adsorption data in pH regions of surface species predominance and from bond-valence calculations. The bis-carbonato species required a distribution of surface charge between the surface and ?? charge planes in order to be consistent with both the spectroscopic and macroscopic adsorption data. This research indicates that U(VI)-carbonato ternary species on poorly crystalline aluminosilicate mineral surfaces may be important in controlling U(VI) mobility in low-temperature geochemical environments over a wide pH range (???5-9), even at the partial pressure of carbon dioxide of ambient air (pCO2 = 10-3.45 atm). ?? 2006 Elsevier Inc. All rights reserved.

  9. Golgi-Colonnier method: correlation of the degree of chromium reduction and pH change with quality of staining.

    PubMed

    Angulo, A; Merchán, J A; Molina, M

    1994-03-01

    We examined the role of chromium reduction in the Golgi-Colonnier method, correlating the quality of neuronal impregnation with the levels of hexavalent (CrVI) and trivalent (CrIII) chromium in the tissue and in the chromation fluid (CF). The concentrations of both chromium species were assessed by measuring spectrophotometrically the CrVI before and after oxidizing the sample and by calculating the ratio of CrVI to total chromium (chromium ratio, CrR). The CrR was almost identical in the tissue and the CF, decreasing exponentially during chromation due to a progressive consumption of CrVI to form CrIII. Satisfactory cell impregnation was obtained only when the CrR was 0.45-0.7, regardless of other factors. The CrR values could be accurately predicted by the pH increase of the CF; this increase has proven to be a most reliable criterion to decide the endpoint of the chromation process. The dependence of cell staining on the [CrIII], together with the well-known ability of this species to bridge proteins, suggests that the key event for cell impregnation is the cross-linking of neuronal proteins by CrIII polymers.

  10. Civilian Manning of AE, AFS, and AD Type Support Ships. Volume II. Appendices.

    DTIC Science & Technology

    1983-04-05

    Manpower FYDP Cost Calculations ...... G-1 APPENDIX H - Navy Military Manpower Economic CostLA Calculations ....................................... H...AND AMERICAN MARITIME OFFICERS - Recognizing the serious economic problems confronting the American Merchant Marine with consequential adverse effects...Mindful that certain economic interests both foreign and *" domestic have and are creating substantial damage to an American national resource, our

  11. 34 CFR 222.162 - What disparity standard must a State meet in order to be certified and how are disparities in...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... current expenditures or revenues per pupil for free public education among LEAs in the State is no more... State. The method for calculating the percentage of disparity in a State is in the appendix to this... in paragraph (a) of this section. The method for calculating the weighted average disparity...

  12. 34 CFR 222.162 - What disparity standard must a State meet in order to be certified and how are disparities in...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... current expenditures or revenues per pupil for free public education among LEAs in the State is no more... State. The method for calculating the percentage of disparity in a State is in the appendix to this... in paragraph (a) of this section. The method for calculating the weighted average disparity...

  13. 34 CFR 222.162 - What disparity standard must a State meet in order to be certified and how are disparities in...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... current expenditures or revenues per pupil for free public education among LEAs in the State is no more... State. The method for calculating the percentage of disparity in a State is in the appendix to this... in paragraph (a) of this section. The method for calculating the weighted average disparity...

  14. 40 CFR Appendix Ix to Part 86 - Experimentally Determining the R-Factor for Bench Aging Durability Procedures

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... catalyst. Calculate the least-squared best-fit line through the data. For the data set to be useful for this purpose the data should have an approximately common intercept between 0 and 4000 miles. See the... data between one- and two-times the standard. 2. Estimate the value of R and calculate the effective...

  15. A numerical algorithm for the explicit calculation of SU(N) and SL(N,C) Clebsch-Gordan coefficients

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alex, Arne; Delft, Jan von; Kalus, Matthias

    2011-02-15

    We present an algorithm for the explicit numerical calculation of SU(N) and SL(N,C) Clebsch-Gordan coefficients, based on the Gelfand-Tsetlin pattern calculus. Our algorithm is well suited for numerical implementation; we include a computer code in an appendix. Our exposition presumes only familiarity with the representation theory of SU(2).

  16. 7 CFR Appendix A to Part 210 - Alternate Foods for Meals

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... National Academy of Sciences, Recommended Dietary Allowances (RDA), 1989. (C) To calculate the PDCAAS for... amount of water, fat, oil, colors, flavors or any other substances which have been added). d...

  17. 7 CFR Appendix A to Part 210 - Alternate Foods for Meals

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... National Academy of Sciences, Recommended Dietary Allowances (RDA), 1989. (C) To calculate the PDCAAS for... amount of water, fat, oil, colors, flavors or any other substances which have been added). d...

  18. 7 CFR Appendix A to Part 210 - Alternate Foods for Meals

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... National Academy of Sciences, Recommended Dietary Allowances (RDA), 1989. (C) To calculate the PDCAAS for... amount of water, fat, oil, colors, flavors or any other substances which have been added). d...

  19. 7 CFR Appendix A to Part 210 - Alternate Foods for Meals

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... National Academy of Sciences, Recommended Dietary Allowances (RDA), 1989. (C) To calculate the PDCAAS for... amount of water, fat, oil, colors, flavors or any other substances which have been added). d...

  20. 40 CFR 600.510-12 - Calculation of average fuel economy and average carbon-related exhaust emissions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... nearest 0.1 mpg; or (iii) For natural gas-fueled model types, the fuel economy value calculated for that... as determined in § 600.208-12(b)(5)(i). (vi) For natural gas dual fuel model types, for model years... natural gas as determined in § 600.208-12(b)(5)(ii) divided by 0.15 provided the requirements of paragraph...

  1. 40 CFR 600.510-12 - Calculation of average fuel economy and average carbon-related exhaust emissions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... nearest 0.1 mpg; or (iii) For natural gas-fueled model types, the fuel economy value calculated for that... as determined in § 600.208-12(b)(5)(i). (vi) For natural gas dual fuel model types, for model years... natural gas as determined in § 600.208-12(b)(5)(ii) divided by 0.15 provided the requirements of paragraph...

  2. Energy levels and radiative rates for transitions in Fe V, Co VI and Ni VII

    NASA Astrophysics Data System (ADS)

    Aggarwal, K. M.; Bogdanovich, P.; Keenan, F. P.; Kisielius, R.

    2017-03-01

    Energy levels, Landé g-factors and radiative lifetimes are reported for the lowest 182 levels of the 3d4, 3d34s and 3d34p configurations of Fe V, Co VI and Ni VII. Additionally, radiative rates (A-values) have been calculated for the E1, E2 and M1 transitions among these levels. The calculations have been performed in a quasi-relativistic approach (QR) with a very large configuration interaction (CI) wavefunction expansion, which has been found to be necessary for these ions. Our calculated energies for all ions are in excellent agreement with the available measurements, for most levels. Discrepancies among various calculations for the radiative rates of E1 transitions in Fe V are up to a factor of two for stronger transitions (f ≥ 0.1), and larger (over an order of magnitude) for weaker ones. The reasons for these discrepancies have been discussed and mainly are due to the differing amount of CI and methodologies adopted. However, there are no appreciable discrepancies in similar data for M1 and E2 transitions, or the g-factors for the levels of Fe V, the only ion for which comparisons are feasible.

  3. A first-principles study of group IV and VI atoms doped blue phosphorene

    NASA Astrophysics Data System (ADS)

    Bai, Ruimin; Chen, Zheng; Gou, Manman; Zhang, Yixin

    2018-02-01

    Using first-principles calculations, we have systematically investigated the structural, electronic and magnetic properties of blue phosphorene doped by group IV and VI atoms, including C, Si, Ge, Sn, O, S, Se and Te. All the doped systems are energetically stable. Only C, Si, Ge and O-substituted systems show the characteristics of spin polarization and the magnetic moments are all 1.0 μB. Moreover, we found that C, Si, Ge and O doped systems are indirect bandgap semiconductors, while Sn, S, Se and Te doped systems present metallic property. These results show that blue phosphorene can be used prospectively in optoelectronic and spintronic devices.

  4. Analysis of radiation exposure, Third Marine Corps Provisional Atomic Exercise Brigade. Exercise Desert Rock VI, Operation Teapot. Technical report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goetz, J.; Klemm, J.; Ortlieb, E.

    The radiation dose is reconstructed for 3d MCPAEB personnel participating in exercises involving helicopter-lifted assaults in conjunction with Shot Bee of Operation Teapot, Exercise Desert Rock VI. Brigade personnel were exposed to initial radiation while in trenches at the time of the Shot Bee detonation. They were also exposed to residual radiation from an earlier test shot (Shot Turk) during their subsequent maneuvers and to residual radiation from Shot Bee during an inspection of equipment displays. The calculated total gamma doses to the bulk of the participating troops range from about 0.57-0.85 rem.

  5. Thermodynamic analysis of vapor-phase epitaxy of CdTe using a metallic Cd source

    NASA Astrophysics Data System (ADS)

    Iso, Kenji; Murakami, Hisashi; Koukitu, Akinori

    2017-07-01

    Thermodynamic analysis of CdTe growth using cost-effective metallic Cd and dialkyl telluride was performed. The major vapor species at source zone in equilibrium were gaseous Cd for the group-II precursor, and Te2 and H2Te for the group-VI precursors. The driving force for the CdTe deposition was still positive even at 650 °C. This indicates that CdTe formation from gaseous Cd can proceed thermodynamically. Furthermore, the calculations showed that CdTe decomposes at higher temperature and increasing the II/VI ratio increases the limit of the growth temperature, which coincides with the experimental results.

  6. Revised and Extended Analysis of the Odd Parity Configurations of Five-Times Ionized Xenon: Xe VI

    NASA Astrophysics Data System (ADS)

    Churilov, S. S.; Joshi, Y. N.

    Xenon spectra were recorded in the 300-1240 Å region on a 3 m and a 10.7 normal incidence spectrograph using a modified triggered spark source. The spectrum of five-times ionized xenon (Xe VI) was investigated. The previous analysis of the 5s25p,5s5p2, 5s25d and 5s26s configurations [V. Kaufman and J. Sugar, J. Opt. soc. Am. B4, 1924 (1987), A. Tauheed et al, J. Phys. B: At. Mol. Opt. Phys. 25, L561 (1992)] was confirmed. Three of the five levels of the 5p3 configurations [A. Tauheed et al. Div. At. Mol. Opt. Phys. (APS) & DAMP(CAP) joint meeting, Toronto, May 1995] and all the 5p3, 5s5p5d and 5s5p6s configurations levels [R. Sarmiento et al., J. Phys. B: At. Mol. Opt. Phys. 32, 2853 (1999)] have been found to be erroneous. 53 new lines have been classified in the Xe VI spectrum. Twenty nine additional levels belonging to the 5p3, 5f, 6p and 5s5p5d odd configurations have been established. Hartree-Fock calculations with relativistic corrections (HFR) and least-square-fitted calculations (LSF) were carried out to interpret the spectrum.

  7. 40 CFR 63.8050 - How do I comply with emissions averaging for stationary process vessels at existing sources?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... individual condensable compounds in the emission stream calculated using Raoult's Law or other appropriate... Equation 12 of 40 CFR part 63, subpart GGG Vi sat=volumetric flowrate of condensable compounds in the...

  8. 21 CFR 352.73 - Determination of SPF value.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... to calculate the erythema effective exposure of a solar simulator: Vi (λ)=1.0 (250 solar simulator as follows: ER21MY99.000 (b) Determination of... subsite areas on each subject with an accurately calibrated solar simulator. A series of five exposures...

  9. 21 CFR 352.73 - Determination of SPF value.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... to calculate the erythema effective exposure of a solar simulator: Vi (λ)=1.0 (250 solar simulator as follows: ER21MY99.000 (b) Determination of... subsite areas on each subject with an accurately calibrated solar simulator. A series of five exposures...

  10. 21 CFR 352.73 - Determination of SPF value.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... to calculate the erythema effective exposure of a solar simulator: Vi (λ)=1.0 (250 solar simulator as follows: ER21MY99.000 (b) Determination of... subsite areas on each subject with an accurately calibrated solar simulator. A series of five exposures...

  11. 7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... calculated using the Food Buying Guide for Child Nutrition Programs (Program Aid Number 1331). 5. In the... Marine Fisheries Service of the USDC, Food and Drug Administration, or the Department of Justice for...

  12. 7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... calculated using the Food Buying Guide for Child Nutrition Programs (Program Aid Number 1331). 5. In the... Marine Fisheries Services of the USDC, Food and Drug Administration, or the Department of Justice for...

  13. 7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... calculated using the Food Buying Guide for Child Nutrition Programs (Program AID Number 1331). 5. In the... Drug Administration, or the Department of Justice for action against the company. Any or all of the...

  14. 40 CFR Appendix B to Part 191 - Calculation of Annual Committed Effective Dose

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the proportion of the stochastic risk resulting from irradiation of the tissue or organ to the total... of HE. III. Annual Committed Tissue or Organ Equivalent Dose For internal irradiation from...

  15. 40 CFR Appendix B to Part 191 - Calculation of Annual Committed Effective Dose

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... the proportion of the stochastic risk resulting from irradiation of the tissue or organ to the total... of HE. III. Annual Committed Tissue or Organ Equivalent Dose For internal irradiation from...

  16. 40 CFR Appendix B to Part 191 - Calculation of Annual Committed Effective Dose

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the proportion of the stochastic risk resulting from irradiation of the tissue or organ to the total... of HE. III. Annual Committed Tissue or Organ Equivalent Dose For internal irradiation from...

  17. 40 CFR Appendix B to Part 191 - Calculation of Annual Committed Effective Dose

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the proportion of the stochastic risk resulting from irradiation of the tissue or organ to the total... of HE. III. Annual Committed Tissue or Organ Equivalent Dose For internal irradiation from...

  18. 40 CFR Appendix B to Part 191 - Calculation of Annual Committed Effective Dose

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... the proportion of the stochastic risk resulting from irradiation of the tissue or organ to the total... of HE. III. Annual Committed Tissue or Organ Equivalent Dose For internal irradiation from...

  19. Protocol for Enhanced in situ Bioremediation Using Emulsified Edible Oil

    DTIC Science & Technology

    2006-05-01

    of molecular hydrogen include natural organic matter, fuel hydrocarbons, landfill leachate , or added organic substrates. Hydrogen is generated by... Phytoremediation of Chlorinated and Recalcitrant Compounds, p. 47-53. APPENDIX A SUBSTRATE CALCULATIONS Excel spreadsheets are

  20. RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user`s manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.

    This document is the User`s Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code`s capabilities and limitations; Chapter 2 describes the code`s structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARCmore » and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs.« less

  1. Highly active nanoscale zero-valent iron (nZVI)-Fe3O4 nanocomposites for the removal of chromium(VI) from aqueous solutions.

    PubMed

    Lv, Xiaoshu; Xu, Jiang; Jiang, Guangming; Tang, Jie; Xu, Xinhua

    2012-03-01

    For the first time, nanoscale zero-valent iron (nZVI)-Fe(3)O(4) nanocomposites, prepared by an in situ reduction method, are employed for chromium(VI) removal in aqueous environment. 96.4% Cr(VI) could be removed by these novel materials within 2h under pH of 8.0 and initial Cr concentration of 20 mg L(-1), compared with 48.8% by bare nFe(3)O(4) and 18.8% by bare nZVI. Effects of several factors, including mass composition of nZVI-Fe(3)O(4) nanocomposites, initial pH and Cr(VI) concentration, were evaluated. The optimal ratio of nFe(3)O(4) to nZVI mass lies at 12:1 with a fixed nZVI concentration of 0.05 g L(-1). Low pH and initial Cr(VI) concentration could increase both the Cr(VI) removal efficiency and reaction rate. Corresponding reaction kinetics fitted well with the pseudo second-order adsorption model. Free energy change (ΔG) of this reaction was calculated to be -4.6 kJ mol(-1) by thermodynamic study, which confirmed its spontaneous and endothermic characteristic. The experimental data could be well described by the Langmuir and Freundlich model, and the maximum capacity (q(max)) obtained from the Langmuir model was 100 and 29.43 mg g(-1) at pH 3.0 and 8.0, respectively. The reaction mechanism was discussed in terms of the mutual benefit brought by the electron transfer from Fe(0) to Fe(3)O(4). Copyright © 2011 Elsevier Inc. All rights reserved.

  2. Six-Year Incidence of Blindness and Visual Impairment in Kenya: The Nakuru Eye Disease Cohort Study

    PubMed Central

    Bastawrous, Andrew; Mathenge, Wanjiku; Wing, Kevin; Rono, Hillary; Gichangi, Michael; Weiss, Helen A.; Macleod, David; Foster, Allen; Burton, Matthew J.; Kuper, Hannah

    2016-01-01

    Purpose To describe the cumulative 6-year incidence of visual impairment (VI) and blindness in an adult Kenyan population. The Nakuru Posterior Segment Eye Disease Study is a population-based sample of 4414 participants aged ≥50 years, enrolled in 2007–2008. Of these, 2170 (50%) were reexamined in 2013–2014. Methods The World Health Organization (WHO) and US definitions were used to calculate presenting visual acuity classifications based on logMAR visual acuity tests at baseline and follow-up. Detailed ophthalmic and anthropometric examinations as well as a questionnaire, which included past medical and ophthalmic history, were used to assess risk factors for study participation and vision loss. Cumulative incidence of VI and blindness, and factors associated with these outcomes, were estimated. Inverse probability weighting was used to adjust for nonparticipation. Results Visual acuity measurements were available for 2164 (99.7%) participants. Using WHO definitions, the 6-year cumulative incidence of VI was 11.9% (95%CI [confidence interval]: 10.3–13.8%) and blindness was 1.51% (95%CI: 1.0–2.2%); using the US classification, the cumulative incidence of blindness was 2.70% (95%CI: 1.8–3.2%). Incidence of VI increased strongly with older age, and independently with being diabetic. There are an estimated 21 new cases of VI per year in people aged ≥50 years per 1000 people, of whom 3 are blind. Therefore in Kenya we estimate that there are 92,000 new cases of VI in people aged ≥50 years per year, of whom 11,600 are blind, out of a total population of approximately 4.3 million people aged 50 and above. Conclusions The incidence of VI and blindness in this older Kenyan population was considerably higher than in comparable studies worldwide. A continued effort to strengthen the eye health system is necessary to support the growing unmet need in an aging and growing population. PMID:27820953

  3. Six-Year Incidence of Blindness and Visual Impairment in Kenya: The Nakuru Eye Disease Cohort Study.

    PubMed

    Bastawrous, Andrew; Mathenge, Wanjiku; Wing, Kevin; Rono, Hillary; Gichangi, Michael; Weiss, Helen A; Macleod, David; Foster, Allen; Burton, Matthew J; Kuper, Hannah

    2016-11-01

    To describe the cumulative 6-year incidence of visual impairment (VI) and blindness in an adult Kenyan population. The Nakuru Posterior Segment Eye Disease Study is a population-based sample of 4414 participants aged ≥50 years, enrolled in 2007-2008. Of these, 2170 (50%) were reexamined in 2013-2014. The World Health Organization (WHO) and US definitions were used to calculate presenting visual acuity classifications based on logMAR visual acuity tests at baseline and follow-up. Detailed ophthalmic and anthropometric examinations as well as a questionnaire, which included past medical and ophthalmic history, were used to assess risk factors for study participation and vision loss. Cumulative incidence of VI and blindness, and factors associated with these outcomes, were estimated. Inverse probability weighting was used to adjust for nonparticipation. Visual acuity measurements were available for 2164 (99.7%) participants. Using WHO definitions, the 6-year cumulative incidence of VI was 11.9% (95%CI [confidence interval]: 10.3-13.8%) and blindness was 1.51% (95%CI: 1.0-2.2%); using the US classification, the cumulative incidence of blindness was 2.70% (95%CI: 1.8-3.2%). Incidence of VI increased strongly with older age, and independently with being diabetic. There are an estimated 21 new cases of VI per year in people aged ≥50 years per 1000 people, of whom 3 are blind. Therefore in Kenya we estimate that there are 92,000 new cases of VI in people aged ≥50 years per year, of whom 11,600 are blind, out of a total population of approximately 4.3 million people aged 50 and above. The incidence of VI and blindness in this older Kenyan population was considerably higher than in comparable studies worldwide. A continued effort to strengthen the eye health system is necessary to support the growing unmet need in an aging and growing population.

  4. Kinetics modeling and reaction mechanism of ferrate(VI) oxidation of benzotriazoles.

    PubMed

    Yang, Bin; Ying, Guang-Guo; Zhang, Li-Juan; Zhou, Li-Jun; Liu, Shan; Fang, Yi-Xiang

    2011-03-01

    Benzotriazoles (BTs) are high production volume chemicals with broad application in various industrial processes and in households, and have been found to be omnipresent in aquatic environments. We investigated oxidation of five benzotriazoles (BT: 1H-benzotriazole; 5MBT: 5-methyl-1H-benzotriazole; DMBT: 5,6-dimethyl-1H-benzotriazole hydrate; 5CBT: 5-chloro-1H-benzotriazole; HBT: 1-hydroxybenzotriazole) by aqueous ferrate (Fe(VI)) to determine reaction kinetics as a function of pH (6.0-10.0), and interpreted the reaction mechanism of Fe(VI) with BTs by using a linear free-energy relationship. The pK(a) values of BT and DMBT were also determined using UV-Visible spectroscopic method in order to calculate the species-specific rate constants, and they were 8.37 ± 0.0 and 8.98 ± 0.08 respectively. Each of BTs reacted moderately with Fe(VI) with the k(app) ranged from 7.2 to 103.8 M(-1)s(-1) at pH 7.0 and 24 ± 1 °C. When the molar ratio of Fe(VI) and BTs increased up to 30:1, the removal rate of BTs reached about >95% in buffered milli-Q water or secondary wastewater effluent. The electrophilic oxidation mechanism of the above reaction was illustrated by using a linear free-energy relationship between pH-dependence of species-specific rate constants and substituent effects (σ(p)). Fe(VI) reacts initially with BTs by electrophilic attack at the 1,2,3-triazole moiety of BT, 5MBT, DMBT and 5CBT, and at the N-OH bond of HBT. Moreover, for BT, 5MBT, DMBT and 5CBT, the reactions with the species HFeO(4)(-) predominantly controled the reaction rates. For HBT, the species H(2)FeO(4) with dissociated HBT played a major role in the reaction. The results showed that Fe(VI) has the ability to degrade benzotriazoles in water. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Magnetic solid-phase extraction combined with graphite furnace atomic absorption spectrometry for speciation of Cr(III) and Cr(VI) in environmental waters.

    PubMed

    Jiang, Hong-mei; Yang, Ting; Wang, Yan-hong; Lian, Hong-zhen; Hu, Xin

    2013-11-15

    A new approach of magnetic solid phase extraction (MSPE) coupled with graphite furnace atomic absorption spectrometry (GFAAS) has been developed for the speciation of Cr(III) and Cr(VI) using zincon-immobilized silica-coated magnetic Fe3O4 nanoparticles (Zincon-Si-MNPs) as the MSPE absorbent. Cr(III) was quantitatively reserved on the absorbent at pH 9.1 while total Cr was reserved at pH 6.5. The absorbed Cr species were eluted by using 2 mol/L HCl and detected by GFAAS. The concentration of Cr(VI) could be calculated by subtracting Cr(III) from total Cr. All the parameters affecting the separation and extraction efficiency of Cr species such as pH, extraction time, concentration and volume of eluent, sample volume and influence of co-existing ions were systematically examined and the optimized conditions were established accordingly. The detection limit (LOD) of the method was 0.016 and 0.011 ng mL(-1) for Cr(III) and Cr(VI), respectively, with the enrichment factor of 100 and 150. The precisions of this method (Relative standard deviation, RSD, n=7) for Cr(III) and Cr(VI) at 0.1 ng mL(-1) were 6.0% and 6.2%, respectively. In order to validate the proposed method, a certified reference material of environmental water was analyzed, and the result of Cr speciation was in good agreement with the certified value. This MSPE-GFAAS method has been successfully applied for the speciation of Cr(III) and Cr(VI) in lake and tap waters with the recoveries of 88-109% for the spiked samples. Moreover, the MSPE separation mechanism of Cr(III) and Cr(VI) based on their adsorption-desorption on Zincon-Si-MNPs has been explained through various spectroscopic characterization. © 2013 Elsevier B.V. All rights reserved.

  6. A Mass-balance nitrate model for predicting the effects of land use on ground-water quality in municipal wellhead-protection areas

    USGS Publications Warehouse

    Frimpter, M.H.; Donohue, J.J.; Rapacz, M.V.; Beye, H.G.

    1990-01-01

    A mass-balance accounting model can be used to guide the management of septic systems and fertilizers to control the degradation of groundwater quality in zones of an aquifer that contributes water to public supply wells. The nitrate nitrogen concentration of the mixture in the well can be predicted for steady-state conditions by calculating the concentration that results from the total weight of nitrogen and total volume of water entering the zone of contribution to the well. These calculations will allow water-quality managers to predict the nitrate concentrations that would be produced by different types and levels of development, and to plan development accordingly. Computations for different development schemes provide a technical basis for planners and managers to compare water quality effects and to select alternatives that limit nitrate concentration in wells. Appendix A contains tables of nitrate loads and water volumes from common sources for use with the accounting model. Appendix B describes the preparation of a spreadsheet for the nitrate loading calculations with a software package generally available for desktop computers. (USGS)

  7. VizieR Online Data Catalog: Comet ion acoustic waves code (Gunell+, 2017)

    NASA Astrophysics Data System (ADS)

    Gunell, H.; Nilsson, H.; Hamrin, M.; Eriksson, A.; Odelstad, E.; Maggiolo, R.; Henri, P.; Vallieres, X.; Altwegg, K.; Tzou, C.-Y.; Rubin, M.; Glassmeier, K.-H.; Stenberg Wieser, G.; Simon Wedlund, C.; de Keyser, J.; Dhooghe, F.; Cessateur, G.; Gibbons, A.

    2017-01-01

    The general package for dispersion relations and fluctuation calculations using simple pole expansions is in the directory named simple. The directory ThisPaper contains files that are specific to the present paper. ThisPaper/startup.m sets up paths and physical constants. ThisPaper/aa16appendix.m plots the figure in the appendix. ThisPaper/aa16figs7to9.m performs the computations behind Figs. 7-9 and plots those figures. ThisPaper/aa16fig6.m performs the computations behind Fig. 6 and plots it. (2 data files).

  8. Validation of Vegetation Index Time Series from Suomi NPP Visible Infrared Imaging Radiometer Suite Using Tower Radiation Flux Measurements

    NASA Astrophysics Data System (ADS)

    Miura, T.; Kato, A.; Wang, J.; Vargas, M.; Lindquist, M.

    2015-12-01

    Satellite vegetation index (VI) time series data serve as an important means to monitor and characterize seasonal changes of terrestrial vegetation and their interannual variability. It is, therefore, critical to ensure quality of such VI products and one method of validating VI product quality is cross-comparison with in situ flux tower measurements. In this study, we evaluated the quality of VI time series derived from Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (NPP) spacecraft by cross-comparison with in situ radiation flux measurements at select flux tower sites over North America and Europe. VIIRS is a new polar-orbiting satellite sensor series, slated to replace National Oceanic and Atmospheric Administration's Advanced Very High Resolution Radiometer in the afternoon overpass and to continue the highly-calibrated data streams initiated with Moderate Resolution Imaging Spectrometer of National Aeronautics and Space Administration's Earth Observing System. The selected sites covered a wide range of biomes, including croplands, grasslands, evergreen needle forest, woody savanna, and open shrublands. The two VIIRS indices of the Top-of-Atmosphere (TOA) Normalized Difference Vegetation Index (NDVI) and the atmospherically-corrected, Top-of-Canopy (TOC) Enhanced Vegetation Index (EVI) (daily, 375 m spatial resolution) were compared against the TOC NDVI and a two-band version of EVI (EVI2) calculated from tower radiation flux measurements, respectively. VIIRS and Tower VI time series showed comparable seasonal profiles across biomes with statistically significant correlations (> 0.60; p-value < 0.01). "Start-of-season (SOS)" phenological metric values extracted from VIIRS and Tower VI time series were also highly compatible (R2 > 0.95), with mean differences of 2.3 days and 5.0 days for the NDVI and the EVI, respectively. These results indicate that VIIRS VI time series can capture seasonal evolution of vegetated land surface as good as in situ radiometric measurements. Future studies that address biophysical or physiological interpretations of Tower VI time series derived from radiation flux measurements are desirable.

  9. High pressure phase transitions in tetrahedrally coordinated semiconducting compounds

    NASA Technical Reports Server (NTRS)

    Yu, S. C.; Spain, I. L.; Skelton, E. F.

    1978-01-01

    New experimental results are reported for structural transitions at high pressure in several III-V compounds and two II-VI compounds. These data, together with earlier results, are then compared with the predictions of model calculations of Van Vechten. Experimental transition pressures are often at variance with calculated values. However, his calculation assumes that the high pressure phase is metallic, with the beta-Sn structure. The present results show that several compounds assume an ionic NaCl structure at high pressure, while others have neither the beta-Sn nor NaCl structure.

  10. Economic Evaluation of Munitions Manufacturing Pink Wastewater Treatment Alternatives Using a Present Value-Unit Cost Methodology

    DTIC Science & Technology

    1982-02-01

    BACKGROUND 1 1.2 TECHNICAL APPROACH 3 1.3 OBJECTIVES 3 2.0 INVESTIGATION 5 2.1 LITERATURE SEARCH 5 2.2 SITE ViSITS 6 2.3 PINK WATER SOURCES AND...Scale 10 5 and 106 GPD Plant Designs 13 3.1 Matrix of Pink Water Treatment Systems Compared on a PVUC Basis 28 3.2 Calculated Capital & Annual... 5 Year Planning Horizon 109 3.6 Calculated PVUC ($/K-GAL) for Each Alternative - 1,000,000 GPD - 5 Year Planning Horizon 110 3.7 Calculated Annual

  11. 40 CFR Appendix Ix to Part 86 - Experimentally Determining the R-Factor for Bench Aging Durability Procedures

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... for each catalyst. Calculate the least-squared best-fit line through the data. For the data set to be useful for this purpose the data should have an approximately common intercept between 0 and 4000 miles... testing yields data between one- and two-times the standard. 2. Estimate the value of R and calculate the...

  12. 40 CFR Appendix Ix to Part 86 - Experimentally Determining the R-Factor for Bench Aging Durability Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for each catalyst. Calculate the least-squared best-fit line through the data. For the data set to be useful for this purpose the data should have an approximately common intercept between 0 and 4000 miles... testing yields data between one- and two-times the standard. 2. Estimate the value of R and calculate the...

  13. 40 CFR Appendix Ix to Part 86 - Experimentally Determining the R-Factor for Bench Aging Durability Procedures

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... for each catalyst. Calculate the least-squared best-fit line through the data. For the data set to be useful for this purpose the data should have an approximately common intercept between 0 and 4000 miles... testing yields data between one- and two-times the standard. 2. Estimate the value of R and calculate the...

  14. 40 CFR Appendix Ix to Part 86 - Experimentally Determining the R-Factor for Bench Aging Durability Procedures

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... for each catalyst. Calculate the least-squared best-fit line through the data. For the data set to be useful for this purpose the data should have an approximately common intercept between 0 and 4000 miles... testing yields data between one- and two-times the standard. 2. Estimate the value of R and calculate the...

  15. 17 CFR 240.15c3-1a - Options (Appendix A to 17 CFR 240.15c3-1).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... terms theoretical gains and losses shall mean the gain and loss in the value of individual option series... paragraph (a)(1)(iii) of this section). Theoretical gains and losses shall be calculated using a theoretical... models. Any such model shall calculate theoretical gains and losses as described in paragraph (a)(1)(i)(A...

  16. Ship-in-a-bottle CMPO in MIL-101(Cr) for selective uranium recovery from aqueous streams through adsorption.

    PubMed

    De Decker, Jeroen; Folens, Karel; De Clercq, Jeriffa; Meledina, Maria; Van Tendeloo, Gustaaf; Du Laing, Gijs; Van Der Voort, Pascal

    2017-08-05

    Mesoporous MIL-101(Cr) is used as host for a ship-in-a-bottle type adsorbent for selective U(VI) recovery from aqueous environments. The acid-resistant cage-type MOF is built in-situ around N,N-Diisobutyl-2-(octylphenylphosphoryl)acetamide (CMPO), a sterically demanding ligand with high U(VI) affinity. This one-step procedure yields an adsorbent which is an ideal compromise between homogeneous and heterogeneous systems, where the ligand can act freely within the pores of MIL-101, without leaching, while the adsorbent is easy separable and reusable. The adsorbent was characterized by XRD, FTIR spectroscopy, nitrogen adsorption, XRF, ADF-STEM and EDX, to confirm and quantify the successful encapsulation of the CMPO in MIL-101, and the preservation of the host. Adsorption experiments with a central focus on U(VI) recovery were performed. Very high selectivity for U(VI) was observed, while competitive metal adsorption (rare earths, transition metals...) was almost negligible. The adsorption capacity was calculated at 5.32mg U/g (pH 3) and 27.99mg U/g (pH 4), by fitting equilibrium data to the Langmuir model. Adsorption kinetics correlated to the pseudo-second-order model, where more than 95% of maximum uptake is achieved within 375min. The adsorbed U(VI) is easily recovered by desorption in 0.1M HNO 3 . Three adsorption/desorption cycles were performed. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Ventilation/perfusion SPECT/CT in patients with pulmonary emphysema. Evaluation of software-based analysing.

    PubMed

    Schreiter, V; Steffen, I; Huebner, H; Bredow, J; Heimann, U; Kroencke, T J; Poellinger, A; Doellinger, F; Buchert, R; Hamm, B; Brenner, W; Schreiter, N F

    2015-01-01

    The purpose of this study was to evaluate the reproducibility of a new software based analysing system for ventilation/perfusion single-photon emission computed tomography/computed tomography (V/P SPECT/CT) in patients with pulmonary emphysema and to compare it to the visual interpretation. 19 patients (mean age: 68.1 years) with pulmonary emphysema who underwent V/P SPECT/CT were included. Data were analysed by two independent observers in visual interpretation (VI) and by software based analysis system (SBAS). SBAS PMOD version 3.4 (Technologies Ltd, Zurich, Switzerland) was used to assess counts and volume per lung lobe/per lung and to calculate the count density per lung, lobe ratio of counts and ratio of count density. VI was performed using a visual scale to assess the mean counts per lung lobe. Interobserver variability and association for SBAS and VI were analysed using Spearman's rho correlation coefficient. Interobserver agreement correlated highly in perfusion (rho: 0.982, 0.957, 0.90, 0.979) and ventilation (rho: 0.972, 0.924, 0.941, 0.936) for count/count density per lobe and ratio of counts/count density in SBAS. Interobserver agreement correlated clearly for perfusion (rho: 0.655) and weakly for ventilation (rho: 0.458) in VI. SBAS provides more reproducible measures than VI for the relative tracer uptake in V/P SPECT/CTs in patients with pulmonary emphysema. However, SBAS has to be improved for routine clinical use.

  18. Comparing the Impact of Refractive and Non-Refractive Vision Loss on Functioning and Disability: The Salisbury Eye Evaluation

    PubMed Central

    Zebardast, Nazlee; Swenor, Bonnielin K.; van Landingham, Suzanne W.; Massof, Robert W.; Munoz, Beatriz; West, Sheila K.; Ramulu, Pradeep Y.

    2015-01-01

    Purpose To compare the effects of uncorrected refractive error (URE) and non-refractive visual impairment (VI) on performance and disability measures. Design Cross-sectional population-based study. Participants 2469 individuals with binocular presenting visual acuity (PVA) of 20/80 or better who participated in the first round of the Salisbury Eye Evaluation study. Methods URE was defined as binocular PVA of 20/30 or worse, improving to better than 20/30 with subjective refraction. VI was defined as post-refraction binocular best corrected visual acuity (BCVA) of 20/30 or worse. The visual acuity decrement attributable to VI was calculated as the difference between BCVA and 20/30 while that due to URE was taken as the difference between PVA and BCVA. Multivariable regression analyses were used to assess the disability impact of 1) vision status (VI, URE, or normal vision) using the group with normal vision as reference, and 2) a one-line decrement in acuity due to VI or URE. Main Outcome Measures Objective measures of visual function were obtained from timed performance of mobility and near vision tasks, self-reported driving cessation, and self-reported visual difficulty measured by the Activities of Daily Vision (ADV) scale. ADV responses were analyzed using Rasch analysis to determine visual ability. Results Compared to individuals with normal vision, subjects with VI (n=191) had significantly poorer objective and subjective visual functioning in all metrics examined (p<0.05) while subjects with URE (n=132) demonstrated slower walking speeds, slower near task performance, more frequent driving cessation and lower ADV scores (p<0.05), but did not demonstrate slower stair climbing or descent speed. For all functional metrics evaluated, the impact of VI was greater than the impact of URE. The impact of a one-line VA decrement due to VI was associated with greater deficits in mobility measures and driving cessation when compared to a one-line VA decrement due to URE. Conclusions VI is associated with greater disability than URE across a wide variety of functional measures, even in analyses adjusting for the severity of vision loss. Refractive and non-refractive vision loss should be distinguished in studies evaluating visual disability, and should be understood to have differing consequences. PMID:25813453

  19. Chemical processes for the extreme enrichment of tellurium into marine ferromanganese oxides

    NASA Astrophysics Data System (ADS)

    Kashiwabara, Teruhiko; Oishi, Yasuko; Sakaguchi, Aya; Sugiyama, Toshiki; Usui, Akira; Takahashi, Yoshio

    2014-04-01

    Tellurium, an element of growing economic importance, is extremely enriched in marine ferromanganese oxides. We investigated the mechanism of this enrichment using a combination of spectroscopic analysis and adsorption/coprecipitation experiments. X-ray Absorption Near-Edge Structure (XANES) analysis showed that in adsorption/coprecipitation systems, Te(IV) was oxidized on δ-MnO2 and not oxidized on ferrihydrite. Extended X-ray Absorption Fine Structure (EXAFS) analysis showed that both Te(IV) and Te(VI) were adsorbed on the surface of δ-MnO2 and ferrihydrite via formation of inner-sphere complexes. In addition, Te(VI) can be structurally incorporated into the linkage of Fe octahedra through a coprecipitation process because of its molecular geometry that is similar to the Fe octahedron. The largest distribution coefficient obtained in the adsorption/coprecipitation experiments was for the Te(VI)/ferrihydrite coprecipitation system, and it was comparable to those calculated from the distribution between natural ferromanganese oxides and seawater. Our XAFS and micro-focused X-ray fluorescence (μ-XRF) mapping of natural ferromanganese oxides showed that Te was structurally incorporated as Te(VI) in Fe (oxyhydr)oxide phases. We conclude that the main process for the enrichment of Te in ferromanganese oxides is structural incorporation of Te(VI) into Fe (oxyhydr)oxide phases through coprecipitation. This mechanism can explain the unique degree of enrichment of Te compared with other oxyanions, which are mainly enriched via adsorption on the surface of the solid structures. In particular, the great contrast in the distributions of Te and Se is caused by their oxidized species: (i) the similar geometry of the Te(VI) molecule to Fe octahedron, and (ii) quite soluble nature of Se(VI). Coexisting Mn oxide phases may promote structural incorporation of Te(VI) by oxidation of Te(IV), although the surface oxidation itself may not work as the critical enrichment process as in the case of some cations. This enrichment mechanism also means that ferromanganese oxides mainly scavenge dominant Te(VI) species from seawater and do not affect its species distribution in seawater, as described in a previous model. The variation in Te abundances and the correlation of Te concentration with the growth rate of natural ferromanganese oxides are consistent with the coprecipitation mechanism.

  20. 21 CFR 352.73 - Determination of SPF value.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... to calculate the erythema effective exposure of a solar simulator: Vi (λ) =1.0 (250 solar simulator as follows: ER21MY99.000 (b) Determination of MED... subsite areas on each subject with an accurately calibrated solar simulator. A series of five exposures...

Top