Smart roadside initiative : user manual.
DOT National Transportation Integrated Search
2015-09-01
This document provides the user instructions for the Smart Roadside Initiative (SRI) applications including mobile and web-based SRI applications. These applications include smartphone-enabled information exchange and notification, and software compo...
Code of Federal Regulations, 2012 CFR
2012-07-01
....125. If you are proposing to use explosives, provide three copies of the application. If you are not proposing to use explosives, provide two copies of the application. Include the following information in the... use; (2) If you are using explosives, the following: (i) Type of explosives; (ii) Number and sizes of...
Code of Federal Regulations, 2011 CFR
2011-07-01
... listed in § 250.125. If you are proposing to use explosives, provide three copies of the application. If you are not proposing to use explosives, provide two copies of the application. Include the following... will use; (2) If you are using explosives, the following: (i) Type of explosives; (ii) Number and sizes...
Code of Federal Regulations, 2014 CFR
2014-07-01
....125. If you are proposing to use explosives, provide three copies of the application. If you are not proposing to use explosives, provide two copies of the application. Include the following information in the... use; (2) If you are using explosives, the following: (i) Type of explosives; (ii) Number and sizes of...
Code of Federal Regulations, 2013 CFR
2013-07-01
....125. If you are proposing to use explosives, provide three copies of the application. If you are not proposing to use explosives, provide two copies of the application. Include the following information in the... use; (2) If you are using explosives, the following: (i) Type of explosives; (ii) Number and sizes of...
Applications for fiber optic sensing in the upstream oil and gas industry
NASA Astrophysics Data System (ADS)
Baldwin, Chris S.
2015-05-01
Fiber optic sensing has been used in an increasing number of applications in the upstream oil and gas industry over the past 20 years. In some cases, fiber optic sensing is providing measurements where traditional measurement technologies could not. This paper will provide a general overview of these applications and describe how the use of fiber optic sensing is enabling these applications. Technologies such as Bragg gratings, distributed temperature and acoustic sensing, interferometric sensing, and Brillouin scattering will be discussed. Applications for optic sensing include a range of possibilities from a single pressure measurement point in the wellbore to multizone pressure and flow monitoring. Some applications make use of fully distributed measurements including thermal profiling of the well. Outside of the wellbore, fiber optic sensors are used in applications for flowline and pipeline monitoring and for riser integrity monitoring. Applications to be described in this paper include in-flow profiling, well integrity, production monitoring, and steam chamber growth. These applications will cover well types such as injectors, producers, hydraulic fracturing, and thermal recovery. Many of these applications use the measurements provided by fiber optic sensing to improve enhanced oil recovery operations. The growing use of fiber optic sensors is providing improved measurement capabilities leading to the generation of actionable data for enhanced production optimization. This not only increases the recovered amount of production fluids but can also enhance wellbore integrity and safety.
NASA Astrophysics Data System (ADS)
Goldberg, M.; Sjoberg, W.; Layns, A. L.
2017-12-01
Applications of satellite data are paramount to transform science and technology to product and services which are used in critical decision making. For the satellite community, good representations of technology are the satellite sensors, while science provides the instrument calibration and derived geophysical parameters. Weather forecasting is an application of the science and technology provided by remote sensing satellites. The Joint Polar Satellite System, which includes the Suomi National Polar-orbiting Partnership (S-NPP) provides formidable science and technology to support many applications and includes support to 1) weather forecasting - data from the JPSS Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS) are used to forecast weather events out to 7 days - nearly 85% of all data used in weather forecasting are from polar orbiting satellites; 2) environmental monitoring -data from the JPSS Visible Infrared Imager Radiometer Suite (VIIRS) are used to monitor the environment including the health of coastal ecosystems, drought conditions, fire, smoke, dust, snow and ice, and the state of oceans, including sea surface temperature and ocean color; and 3) climate monitoring - data from JPSS instruments, including OMPS and CERES will provide continuity to climate data records established using NOAA POES and NASA Earth Observing System (EOS) satellite observations. To bridge the gap between products and applications, the JPSS Program has established the Proving Ground and Risk Reduction (PGRR) Program to identify opportunities to maximize the operational application of current JPSS capabilities. The PGRR Program also helps identify and evaluate the use of JPSS capabilities for new operational missions. New PGRR initiatives focus on hydrological, Arctic, data assimilation, atmospheric chemistry, ocean ecosystem applications. At the conference, the benefits of JPSS data on societal benefits will be presented along with results from the PGRR initiatives.
Lunar Applications in Reconfigurable Computing
NASA Technical Reports Server (NTRS)
Somervill, Kevin
2008-01-01
NASA s Constellation Program is developing a lunar surface outpost in which reconfigurable computing will play a significant role. Reconfigurable systems provide a number of benefits over conventional software-based implementations including performance and power efficiency, while the use of standardized reconfigurable hardware provides opportunities to reduce logistical overhead. The current vision for the lunar surface architecture includes habitation, mobility, and communications systems, each of which greatly benefit from reconfigurable hardware in applications including video processing, natural feature recognition, data formatting, IP offload processing, and embedded control systems. In deploying reprogrammable hardware, considerations similar to those of software systems must be managed. There needs to be a mechanism for discovery enabling applications to locate and utilize the available resources. Also, application interfaces are needed to provide for both configuring the resources as well as transferring data between the application and the reconfigurable hardware. Each of these topics are explored in the context of deploying reconfigurable resources as an integral aspect of the lunar exploration architecture.
Improving Societal Benefit Areas from Applications Enhanced by the Joint Polar Satellite System
NASA Astrophysics Data System (ADS)
Goldberg, M.
2016-12-01
Applications of satellite data are paramount to transform science and technology to product and services which are used in critical decision making for societal benefits. For the satellite community, good representations of technology are the satellite sensors, while science provides the instrument calibration and derived geophysical parameters. Weather forecasting is an application of the science and technology provided by remote sensing satellites. The Joint Polar Satellite System, which includes the Suomi National Polar-orbiting Partnership (S-NPP) provides formidable science and technology to support many applications and includes support to 1) weather forecasting - data from the JPSS Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS) are used to forecast weather events out to 7 days - nearly 85% of all data used in weather forecasting are from polar orbiting satellites; 2) environmental monitoring -data from the JPSS Visible Infrared Imager Radiometer Suite (VIIRS) are used to monitor the environment including the health of coastal ecosystems, drought conditions, fire, smoke, dust, snow and ice, and the state of oceans, including sea surface temperature and ocean color; and 3) climate monitoring - data from JPSS instruments, including OMPS and CERES will provide continuity to climate data records established using NOAA POES and NASA Earth Observing System (EOS) satellite observations. To bridge the gap between products and applications, the JPSS Program has established a proving ground program to optimize the use of JPSS data with other data sources to improve key products and services. A number of operational and research applications will be presented along with how the data and applications support a large number of societal benefit areas of the Global Earth Observation Systems of Systems (GEOSS).
Abstract: This case study application provides discussion on a selected application of advanced concepts, included in the End of Asset Life Reinvestment decision-making process tool, using Milwaukee Metropolitan Sewer District (MMSD) pump and motor data sets. The tool provides s...
6 CFR 37.11 - Application and documents the applicant must provide.
Code of Federal Regulations, 2010 CFR
2010-01-01
... subsequent visits. (c) Identity. (1) To establish identity, the applicant must present at least one of the... present at least one document included in paragraph (c) of this section. (e) Social security number (SSN). (1) Except as provided in paragraph (e)(3) of this section, individuals presenting the identity...
Localized surface plasmon resonance mercury detection system and methods
James, Jay; Lucas, Donald; Crosby, Jeffrey Scott; Koshland, Catherine P.
2016-03-22
A mercury detection system that includes a flow cell having a mercury sensor, a light source and a light detector is provided. The mercury sensor includes a transparent substrate and a submonolayer of mercury absorbing nanoparticles, e.g., gold nanoparticles, on a surface of the substrate. Methods of determining whether mercury is present in a sample using the mercury sensors are also provided. The subject mercury detection systems and methods find use in a variety of different applications, including mercury detecting applications.
40 CFR 79.10 - Application for registration by fuel manufacturer.
Code of Federal Regulations, 2010 CFR
2010-07-01
... in § 79.11. If the manufacturer produces more than one grade or brand of a designated fuel, a manufacturer may include more than one grade or brand in a single application, provided that the application includes all information required for registration of each such grade or brand by this part. Each...
76 FR 68225 - License Renewal Application for Purdue University
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-03
... each contention, the petitioner must provide a specific statement of the issue of law or fact to be... response to the application. The petition must also include a concise statement of the alleged facts or... exists with the applicant on a material issue of law or fact, including references to specific portions...
Abstract:This case study application provides discussion on a selected application of advanced concepts, included in the End of Asset Life Reinvestment decision-making process tool, using a utility practitioner’s data set. The tool provides step-by-step process guidance to the as...
Personal digital assistant applications for the healthcare provider.
Keplar, Kristine E; Urbanski, Christopher J
2003-02-01
To review some common medical applications available for personal digital assistants (PDAs), with brief discussion of the different PDA operating systems and memory requirements. Key search terms included handheld, PDA, personal digital assistants, and medical applications. The literature was accessed through MEDLINE (1999-August 2002). Other information was obtained through secondary sources such as Web sites describing common PDAs. Medical applications available on PDAs are numerous and include general drug references, specialized drug references (e.g., pediatrics, geriatrics, cardiology, infectious disease), diagnostic guides, medical calculators, herbal medication references, nursing references, toxicology references, and patient tracking databases. Costs and memory requirements for these programs can vary; consequently, the healthcare provider must limit the medication applications that are placed on the handheld computer. This article attempts to systematically describe the common medical applications available for the handheld computer along with cost, memory and download requirements, and Web site information. This review found many excellent PDA drug information applications offering many features which will aid the healthcare provider. Very likely, after using these PDA applications, the healthcare provider will find them indispensable, as their multifunctional capabilities can save time, improve accuracy, and allow for general business procedures as well as being a quick reference tool. To avoid the benefits of this technology might be a step backward.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-19
..., the petitioner must provide a specific statement of the issue of law or fact to be raised or... application. The petition must also include a concise statement of the alleged facts or expert opinions which... applicant on a material issue of law or fact, including references to specific portions of the application...
18 CFR 5.6 - Pre-application document.
Code of Federal Regulations, 2011 CFR
2011-04-01
... project, including any daily or seasonal ramping rates, flushing flows, reservoir operations, and flood... document must describe the existing and proposed (if any) project facilities and operations, provide...)(viii). (2) Project location, facilities, and operations. The potential applicant must include in the...
Thin Client Architecture: The Promise and the Problems.
ERIC Educational Resources Information Center
Machovec, George S.
1997-01-01
Describes thin clients, a networking technology that allows organizations to provide software applications over networked workstations connected to a central server. Topics include corporate settings; major advantages, including cost effectiveness and increased computer security; problems; and possible applications for large public and academic…
Resource Provisioning in SLA-Based Cluster Computing
NASA Astrophysics Data System (ADS)
Xiong, Kaiqi; Suh, Sang
Cluster computing is excellent for parallel computation. It has become increasingly popular. In cluster computing, a service level agreement (SLA) is a set of quality of services (QoS) and a fee agreed between a customer and an application service provider. It plays an important role in an e-business application. An application service provider uses a set of cluster computing resources to support e-business applications subject to an SLA. In this paper, the QoS includes percentile response time and cluster utilization. We present an approach for resource provisioning in such an environment that minimizes the total cost of cluster computing resources used by an application service provider for an e-business application that often requires parallel computation for high service performance, availability, and reliability while satisfying a QoS and a fee negotiated between a customer and the application service provider. Simulation experiments demonstrate the applicability of the approach.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-01
... emissions, (applicants are encouraged to provide quantitative information regarding expected reductions in...). Applicants are encouraged to provide quantitative information that validates the existence of substantial... infrastructure investments on systematic analysis of expected benefits and costs, including both quantitative and...
24 CFR 570.704 - Application requirements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... examine the application's contents and to provide comments on the proposed application. (iv) Prepare its... must consider any such comments and views received and, if the public entity deems appropriate, modify... comment on, proposed activities not previously included in an application and activities which are...
Applications of Optical Scanners in an Academic Center.
ERIC Educational Resources Information Center
Molinari, Carol; Tannenbaum, Robert S.
1995-01-01
Describes optical scanners, including how the technology works; applications in data management and research; development of instructional materials; and providing community services. Discussion includes the three basic types of optical scanners: optical character recognition (OCR), optical mark readers (OMR), and graphic scanners. A sidebar…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-29
... Understood to Also Include FINRA, as Applicable June 22, 2010. Pursuant to Section 19(b)(1) \\1\\ of the... that certain references in Exchange rules should be understood to also include FINRA, as applicable... 0 to provide that certain references in Exchange rules should be understood to also include FINRA...
Cloud Computing Services for Seismic Networks
NASA Astrophysics Data System (ADS)
Olson, Michael
This thesis describes a compositional framework for developing situation awareness applications: applications that provide ongoing information about a user's changing environment. The thesis describes how the framework is used to develop a situation awareness application for earthquakes. The applications are implemented as Cloud computing services connected to sensors and actuators. The architecture and design of the Cloud services are described and measurements of performance metrics are provided. The thesis includes results of experiments on earthquake monitoring conducted over a year. The applications developed by the framework are (1) the CSN---the Community Seismic Network---which uses relatively low-cost sensors deployed by members of the community, and (2) SAF---the Situation Awareness Framework---which integrates data from multiple sources, including the CSN, CISN---the California Integrated Seismic Network, a network consisting of high-quality seismometers deployed carefully by professionals in the CISN organization and spread across Southern California---and prototypes of multi-sensor platforms that include carbon monoxide, methane, dust and radiation sensors.
7 CFR 1455.11 - Application procedure.
Code of Federal Regulations, 2012 CFR
2012-01-01
... PROGRAM § 1455.11 Application procedure. (a) Request for applications (RFA). CCC will issue periodic RFAs... following elements; additional required elements may be specified in the applicable RFA: (1) Title page; (2) Table of contents; (3) Executive summary, which includes; (i) Activities. Provide a summary of the...
7 CFR 1455.11 - Application procedure.
Code of Federal Regulations, 2011 CFR
2011-01-01
... PROGRAM § 1455.11 Application procedure. (a) Request for applications (RFA). CCC will issue periodic RFAs... following elements; additional required elements may be specified in the applicable RFA: (1) Title page; (2) Table of contents; (3) Executive summary, which includes; (i) Activities. Provide a summary of the...
7 CFR 1455.11 - Application procedure.
Code of Federal Regulations, 2013 CFR
2013-01-01
... PROGRAM § 1455.11 Application procedure. (a) Request for applications (RFA). CCC will issue periodic RFAs... following elements; additional required elements may be specified in the applicable RFA: (1) Title page; (2) Table of contents; (3) Executive summary, which includes; (i) Activities. Provide a summary of the...
7 CFR 1455.11 - Application procedure.
Code of Federal Regulations, 2014 CFR
2014-01-01
... PROGRAM § 1455.11 Application procedure. (a) Request for applications (RFA). CCC will issue periodic RFAs... following elements; additional required elements may be specified in the applicable RFA: (1) Title page; (2) Table of contents; (3) Executive summary, which includes; (i) Activities. Provide a summary of the...
Thermal Insulation System for Non-Vacuum Applications Including a Multilayer Composite
NASA Technical Reports Server (NTRS)
Fesmire, James E. (Inventor)
2017-01-01
The thermal insulation system of the present invention is for non-vacuum applications and is specifically tailored to the ambient pressure environment with any level of humidity or moisture. The thermal insulation system includes a multilayered composite including i) at least one thermal insulation layer and at least one compressible barrier layer provided as alternating, successive layers, and ii) at least one reflective film provided on at least one surface of the thermal insulation layer and/or said compressible barrier layer. The different layers and materials and their combinations are designed to provide low effective thermal conductivity for the system by managing all modes of heat transfer. The thermal insulation system includes an optional outer casing surrounding the multilayered composite. The thermal insulation system is particularly suited for use in any sub-ambient temperature environment where moisture or its adverse effects are a concern. The thermal insulation system provides physical resilience against damaging mechanical effects including compression, flexure, impact, vibration, and thermal expansion/contraction.
[Development and application of hospital customer service center platform].
Chen, Minya; Zheng, Konglin; Xia, Yong
2012-01-01
This paper introduces the construction and application of the platform of client service center in the general hospital and discusses how to provide patients with an entire service including service before clinic, on clinic and after clinic. It can also provide references for a new service mode for clinic service.
Application of China-Brazil Earth resources satellite in China
NASA Astrophysics Data System (ADS)
Qiao, Yuliang; Zhao, Shangmin; Zhen, Liu; Bei, Jia
2009-03-01
The launch and successful operation of Chinese-Brazil Earth resources satellite (CBERS-1) in China has accelerated the application of space technology in China. These applications include agriculture, forestry, water conservation, land resources, city planning, environment protection and natural hazards monitoring and so on. The result of these applications provides a scientific basis for government decision making and has created great economic and social benefits in Chinese national economy construction. In this paper we present examples and provide auxiliary documentation of additional applications of the data from Earth resource monitoring.
Swendeman, Dallas; Farmer, Shu; Mindry, Deborah; Lee, Sung-Jae; Medich, Melissa
2016-10-01
In-depth qualitative interviews were conducted with healthcare providers (HCPs) from five HIV medical care coordination teams in a large Los Angeles County HIV clinic, including physicians, nurses, and psychosocial services providers. HCPs reported on the potential utility, acceptability, and barriers for patient self-monitoring and notifications via mobile phones, and web-based dashboards for HCPs. Potential benefits included: 1) enhancing patient engagement, motivation, adherence, and self-management; and 2) improving provider-patient relationships and HCP care coordination. Newly diagnosed and patients with co-morbidities were highest priorities for mobile application support. Facilitators included universal mobile phone ownership and use of smartphones or text messaging. Patient-level barriers included concerns about low motivation and financial instability for consistent use by some patients. Organizational barriers, cited primarily by physicians, included concerns about privacy protections, easy dashboard access, non-integrated electronic records, and competing burdens in limited appointment times. Psychosocial services providers were most supportive of the proposed mobile tools.
Software architecture for time-constrained machine vision applications
NASA Astrophysics Data System (ADS)
Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.
2013-01-01
Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility, because they are normally oriented toward particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse, and inefficient execution on multicore processors. We present a novel software architecture for time-constrained machine vision applications that addresses these issues. The architecture is divided into three layers. The platform abstraction layer provides a high-level application programming interface for the rest of the architecture. The messaging layer provides a message-passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of message. The application layer provides a repository for reusable application modules designed for machine vision applications. These modules, which include acquisition, visualization, communication, user interface, and data processing, take advantage of the power of well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, the proposed architecture is applied to a real machine vision application: a jam detector for steel pickling lines.
The Need for V&V in Reuse-Based Software Engineering
NASA Technical Reports Server (NTRS)
Addy, Edward A.
1997-01-01
V&V is currently performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors, especially errors related to entire' domain or product line rather than a critical processing, as early as possible during the development process. The system application provides the context under which the software artifacts are validated. engineering. This paper describes a framework that extends V&V from an individual application system to a product line of systems that are developed within an architecture-based software engineering environment. This framework includes the activities of traditional application-level V&V, and extends these activities into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for activities.
Wind energy applications guide
DOE Office of Scientific and Technical Information (OSTI.GOV)
anon.
2001-01-01
The brochure is an introduction to various wind power applications for locations with underdeveloped transmission systems, from remote water pumping to village electrification. It includes an introductory section on wind energy, including wind power basics and system components and then provides examples of applications, including water pumping, stand-alone systems for home and business, systems for community centers, schools, and health clinics, and examples in the industrial area. There is also a page of contacts, plus two specific example applications for a wind-diesel system for a remote station in Antarctica and one on wind-diesel village electrification in Russia.
Configuration Management File Manager Developed for Numerical Propulsion System Simulation
NASA Technical Reports Server (NTRS)
Follen, Gregory J.
1997-01-01
One of the objectives of the High Performance Computing and Communication Project's (HPCCP) Numerical Propulsion System Simulation (NPSS) is to provide a common and consistent way to manage applications, data, and engine simulations. The NPSS Configuration Management (CM) File Manager integrated with the Common Desktop Environment (CDE) window management system provides a common look and feel for the configuration management of data, applications, and engine simulations for U.S. engine companies. In addition, CM File Manager provides tools to manage a simulation. Features include managing input files, output files, textual notes, and any other material normally associated with simulation. The CM File Manager includes a generic configuration management Application Program Interface (API) that can be adapted for the configuration management repositories of any U.S. engine company.
17 CFR 3.44 - Temporary licensing of applicants for guaranteed introducing broker registration.
Code of Federal Regulations, 2014 CFR
2014-04-01
... fingerprints of the applicant, if a sole proprietor, and of each principal (including each branch office manager) thereof on fingerprint cards provided by the National Futures Association for that purpose. (b... any principal (including any branch office manager) thereof or for the resubmission of a fingerprint...
17 CFR 3.44 - Temporary licensing of applicants for guaranteed introducing broker registration.
Code of Federal Regulations, 2013 CFR
2013-04-01
... fingerprints of the applicant, if a sole proprietor, and of each principal (including each branch office manager) thereof on fingerprint cards provided by the National Futures Association for that purpose. (b... any principal (including any branch office manager) thereof or for the resubmission of a fingerprint...
Review of Development Survey of Phase Change Material Models in Building Applications
Akeiber, Hussein J.; Wahid, Mazlan A.; Hussen, Hasanen M.; Mohammad, Abdulrahman Th.
2014-01-01
The application of phase change materials (PCMs) in green buildings has been increasing rapidly. PCM applications in green buildings include several development models. This paper briefly surveys the recent research and development activities of PCM technology in building applications. Firstly, a basic description of phase change and their principles is provided; the classification and applications of PCMs are also included. Secondly, PCM models in buildings are reviewed and discussed according to the wall, roof, floor, and cooling systems. Finally, conclusions are presented based on the collected data. PMID:25313367
ERIC Educational Resources Information Center
Wilde, Carroll O.
The Poisson probability distribution is seen to provide a mathematical model from which useful information can be obtained in practical applications. The distribution and some situations to which it applies are studied, and ways to find answers to practical questions are noted. The unit includes exercises and a model exam, and provides answers to…
Smooth Sailing for Weather Forecasting
NASA Technical Reports Server (NTRS)
2002-01-01
Through a cooperative venture with NASA's Stennis Space Center, WorldWinds, Inc., developed a unique weather and wave vector map using space-based radar satellite information and traditional weather observations. Called WorldWinds, the product provides accurate, near real-time, high-resolution weather forecasts. It was developed for commercial and scientific users. In addition to weather forecasting, the product's applications include maritime and terrestrial transportation, aviation operations, precision farming, offshore oil and gas operations, and coastal hazard response support. Target commercial markets include the operational maritime and aviation communities, oil and gas providers, and recreational yachting interests. Science applications include global long-term prediction and climate change, land-cover and land-use change, and natural hazard issues. Commercial airlines have expressed interest in the product, as it can provide forecasts over remote areas. WorldWinds, Inc., is currently providing its product to commercial weather outlets.
7 CFR 1739.15 - Completed application.
Code of Federal Regulations, 2010 CFR
2010-01-01
... completed application must include the following documentation, studies, reports and information in form... sustainability. The applicant must provide a narrative description demonstrating the sustainability of the... sustainability of the Project. (h) A statement of experience. Information on the owners' and principal employees...
29 CFR 1910.155 - Scope, application and definitions applicable to this subpart.
Code of Federal Regulations, 2014 CFR
2014-07-01
... moisture absorption (caking) as well as to provide proper flow capabilities. Dry chemical does not include... require formal classroom instruction. (15) Enclosed structure means a structure with a roof or ceiling and... a rigid shell, energy absorption system, and chin strap intended to be worn to provide protection...
29 CFR 1910.155 - Scope, application and definitions applicable to this subpart.
Code of Federal Regulations, 2013 CFR
2013-07-01
... moisture absorption (caking) as well as to provide proper flow capabilities. Dry chemical does not include... require formal classroom instruction. (15) Enclosed structure means a structure with a roof or ceiling and... a rigid shell, energy absorption system, and chin strap intended to be worn to provide protection...
29 CFR 1910.155 - Scope, application and definitions applicable to this subpart.
Code of Federal Regulations, 2011 CFR
2011-07-01
... moisture absorption (caking) as well as to provide proper flow capabilities. Dry chemical does not include... require formal classroom instruction. (15) Enclosed structure means a structure with a roof or ceiling and... a rigid shell, energy absorption system, and chin strap intended to be worn to provide protection...
29 CFR 1910.155 - Scope, application and definitions applicable to this subpart.
Code of Federal Regulations, 2012 CFR
2012-07-01
... moisture absorption (caking) as well as to provide proper flow capabilities. Dry chemical does not include... require formal classroom instruction. (15) Enclosed structure means a structure with a roof or ceiling and... a rigid shell, energy absorption system, and chin strap intended to be worn to provide protection...
Code of Federal Regulations, 2014 CFR
2014-01-01
..., telephone number and citizenship(s) of (as applicable): (i) Applicant as well as any affiliates or... sensing space system license. Data provided regarding the applicant's proposed remote sensing space system... applicant's total indebtedness; (ix) A person upon who service of all documents may be made. (2) A...
Code of Federal Regulations, 2012 CFR
2012-01-01
..., telephone number and citizenship(s) of (as applicable): (i) Applicant as well as any affiliates or... sensing space system license. Data provided regarding the applicant's proposed remote sensing space system... applicant's total indebtedness; (ix) A person upon who service of all documents may be made. (2) A...
Code of Federal Regulations, 2013 CFR
2013-01-01
..., telephone number and citizenship(s) of (as applicable): (i) Applicant as well as any affiliates or... sensing space system license. Data provided regarding the applicant's proposed remote sensing space system... applicant's total indebtedness; (ix) A person upon who service of all documents may be made. (2) A...
Head Up Displays. (Latest Citations from the Aerospace Database)
NASA Technical Reports Server (NTRS)
1997-01-01
The bibliography contains citations concerning the design, fabrication, and applications of head up displays (HUDs). Applications include military aircraft, helicopters, space shuttle, and commercial aircraft. Functions of the display include instrument approach, target tracking, and navigation. The head up display provides for an integrated avionics system with the pilot in the loop. (Contains 50-250 citations and includes a subject term index and title list.)
Head Up Displays. (Latest citations from the Aerospace Database)
NASA Technical Reports Server (NTRS)
1996-01-01
The bibliography contains citations concerning the design, fabrication, and applications of head up displays (HUDs). Applications include military aircraft, helicopters, space shuttle, and commercial aircraft. Functions of the display include instrument approach, target tracking, and navigation. The head up display provides for an integrated avionics system with the pilot in the loop. (Contains 50-250 citations and includes a subject term index and title list.)
A Framework for Performing Verification and Validation in Reuse Based Software Engineering
NASA Technical Reports Server (NTRS)
Addy, Edward A.
1997-01-01
Verification and Validation (V&V) is currently performed during application development for many systems, especially safety-critical and mission- critical systems. The V&V process is intended to discover errors, especially errors related to critical processing, as early as possible during the development process. The system application provides the context under which the software artifacts are validated. This paper describes a framework that extends V&V from an individual application system to a product line of systems that are developed within an architecture-based software engineering environment. This framework includes the activities of traditional application-level V&V, and extends these activities into domain engineering and into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for the activities.
Biocatalysts: application and engineering for industrial purposes.
Jemli, Sonia; Ayadi-Zouari, Dorra; Hlima, Hajer Ben; Bejar, Samir
2016-01-01
Enzymes are widely applied in various industrial applications and processes, including the food and beverage, animal feed, textile, detergent and medical industries. Enzymes screened from natural origins are often engineered before entering the market place because their native forms do not meet the requirements for industrial application. Protein engineering is concerned with the design and construction of novel enzymes with tailored functional properties, including stability, catalytic activity, reaction product inhibition and substrate specificity. Two broad approaches have been used for enzyme engineering, namely, rational design and directed evolution. The powerful and revolutionary techniques so far developed for protein engineering provide excellent opportunities for the design of industrial enzymes with specific properties and production of high-value products at lower production costs. The present review seeks to highlight the major fields of enzyme application and to provide an updated overview on previous protein engineering studies wherein natural enzymes were modified to meet the operational conditions required for industrial application.
Video fingerprinting for copy identification: from research to industry applications
NASA Astrophysics Data System (ADS)
Lu, Jian
2009-02-01
Research that began a decade ago in video copy detection has developed into a technology known as "video fingerprinting". Today, video fingerprinting is an essential and enabling tool adopted by the industry for video content identification and management in online video distribution. This paper provides a comprehensive review of video fingerprinting technology and its applications in identifying, tracking, and managing copyrighted content on the Internet. The review includes a survey on video fingerprinting algorithms and some fundamental design considerations, such as robustness, discriminability, and compactness. It also discusses fingerprint matching algorithms, including complexity analysis, and approximation and optimization for fast fingerprint matching. On the application side, it provides an overview of a number of industry-driven applications that rely on video fingerprinting. Examples are given based on real-world systems and workflows to demonstrate applications in detecting and managing copyrighted content, and in monitoring and tracking video distribution on the Internet.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-29
..., Inc. Adopting Rule 0 To Provide That Certain References in Exchange Rules Should Be Understood To Also... Exchange rules should be understood to also include FINRA, as applicable. The text of the proposed rule... references in Exchange rules should be understood to also include FINRA, as applicable. Specifically...
30 CFR 778.11 - Providing applicant and operator information.
Code of Federal Regulations, 2010 CFR
2010-07-01
... organizational structure, up to and including the ultimate parent entity of the applicant and operator; for every... title and relationship to you, including percentage of ownership and location in the organizational... controls a surface coal mining operation. [65 FR 79668, Dec. 19, 2000, as amended at 72 FR 68031, Dec. 3...
Tutorial: Terahertz beamforming, from concepts to realizations
NASA Astrophysics Data System (ADS)
Headland, Daniel; Monnai, Yasuaki; Abbott, Derek; Fumeaux, Christophe; Withayachumnankul, Withawat
2018-05-01
The terahertz range possesses significant untapped potential for applications including high-volume wireless communications, noninvasive medical imaging, sensing, and safe security screening. However, due to the unique characteristics and constraints of terahertz waves, the vast majority of these applications are entirely dependent upon the availability of beam control techniques. Thus, the development of advanced terahertz-range beam control techniques yields a range of useful and unparalleled applications. This article provides an overview and tutorial on terahertz beam control. The underlying principles of wavefront engineering include array antenna theory and diffraction optics, which are drawn from the neighboring microwave and optical regimes, respectively. As both principles are applicable across the electromagnetic spectrum, they are reconciled in this overview. This provides a useful foundation for investigations into beam control in the terahertz range, which lies between microwaves and infrared light. Thereafter, noteworthy experimental demonstrations of beam control in the terahertz range are discussed, and these include geometric optics, phased array devices, leaky-wave antennas, reflectarrays, and transmitarrays. These techniques are compared and contrasted for their suitability in applications of terahertz waves.
Methyl Bromide Fumigant Management Plan Phase 2 Templates
Templates provide a checklist and framework for elements including certified pesticide applicator details, application block, buffer zones, sign posting, tarp plan, soil conditions, air monitoring, and good agricultural practices (GAPs).
Application of metamaterial concepts to sensors and chipless RFID
NASA Astrophysics Data System (ADS)
Martín, F.; Herrojo, C.; Vélez, P.; Su, L.; Mata-Contreras, J.; Paredes, F.
2018-02-01
Several strategies for the implementation of microwave sensors based on the use of metamaterial-inspired resonators are pointed out, and examples of applications, including sensors for dielectric characterization and sensors for the measurement of spatial variables, are provided. It will be also shown that novel microwave encoders for chipless RFID systems with very high data capacity can be implemented. The fields of applications of the devices discussed in this talk include dielectric characterization of solids and liquids, angular velocity sensors for space applications, and near-field chipless RFID systems for secure paper applications, among others.
75 FR 23807 - Submission for OMB Review: Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-04
... one-year retention of information on work applications and job orders. For additional information, see... collection. Title of Collection: Work Application/Job Order Recordkeeping. OMB Control Number: 1205-0001..., work experience, and desired pay. They also include services provided to applicants, such as job...
7 CFR 253.7 - Certification of households.
Code of Federal Regulations, 2012 CFR
2012-01-01
... or by mail. The State agency shall document the date the application was received. Each household has... cooperates. (5) Interviews. All applicant households, including those submitting applications by mail, shall... organization available which provides free legal representation, the notice shall also advise the household of...
7 CFR 253.7 - Certification of households.
Code of Federal Regulations, 2013 CFR
2013-01-01
... or by mail. The State agency shall document the date the application was received. Each household has... cooperates. (5) Interviews. All applicant households, including those submitting applications by mail, shall... organization available which provides free legal representation, the notice shall also advise the household of...
40 CFR 194.15 - Content of compliance re-certification application(s).
Code of Federal Regulations, 2011 CFR
2011-07-01
... application shall be updated to provide sufficient information for the Administrator to determine whether or... include: (1) All additional geologic, geophysical, geochemical, hydrologic, and meteorologic information; (2) All additional monitoring data, analyses and results; (3) All additional analyses and results of...
ERIC Educational Resources Information Center
Nikolaeff, Ivan
2016-01-01
Although mobile learning using smartphones and applications or apps have the potential to inform and educate individuals in an outdoor environment, users may find that connectivity issues and basic knowledge of outdoor environments, including both physical and emotional, could be limited by what this technology provided. This study provided my…
Boyer, S A
1999-01-01
There is an alternative to classroom lecture that provides faster, more complete instruction and introduces the learner to clinical application of skills in a safe environment. This teaching style uses multiple media to present professional, published resources that provide excellent quality, topic-specific information. The benefits of this type of teaching/learning module include improved use of student and instructor time, scheduling advantages, increased learning, revenue generation potential, and student empowerment. With this approach, a strong, sound educational base is built, and each course includes some degree or form of clinical application as a key component.
A canary in the coal mine: documenting citizenship and identity in the State of Massachusetts.
Kwong, Richard M; Miller, Edward Alan
2010-06-01
The U.S. federal government requires original documentation of citizenship and identity for applicants to qualify for coverage under Medicaid. The purpose of this investigation is to identify what challenges one state Medicaid agency has faced when implementing this requirement; and to identify what strategies this agency and other interested parties (e.g., providers, community advocates) adopted to help overcome them. The setting for this study is MassHealth, the Medicaid agency for the State of Massachusetts. Data derive from archival documents, direct observation, and in-depth interviews with key stakeholders, including state officials, provider agencies, community health centers, and beneficiary advocates. While MassHealth has met several of the implementation benchmarks put forth in federal regulations and guidance letters, the agency has fallen short in several respects. This includes assisting applicants seeking to enroll in MassHealth and maintaining a seamless documentation submission process. The result has been an increase in application processing time and misinterpretations in the MassHealth community; for example, that legal immigrants should not apply for coverage even though the new requirement does not affect them. Assuming a prominent role in informing and assisting MassHealth applicants has been providers and community-based organizations. Consumer advocacy groups have also worked to streamline the process for demonstrating citizenship and identity. Synergies have been formed between MassHealth and these other organizations as well. Findings suggest a number of lessons for state Medicaid agencies wishing to address the challenges posed by federal requirements to demonstrate citizenship and identity. These include working to ensure the readability, comprehension and non-English translation of materials provided to program applicants. It also includes strengthening the document handling process and forming partnerships with providers, beneficiary advocates, and other community organizations. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.
Contributions and future of radioisotopes in medical, industrial, and space applications
NASA Astrophysics Data System (ADS)
Tingey, G. L.; Dix, G. P.; Wahlquist, E. J.
1990-11-01
There are 333 isotopes that have a half-life between 1 day and 100,000 years that have a wide variety of applications including public health, medicine, industrial technology, food technology and packaging, agriculture, energy supply, and national security. This paper provides an overview of some of the most extensive applications of radioisotopes including some observations of future uses. Examples are discussed that indicate that the use of radioisotopes is almost unlimited and will continue to grow. There is a growing need for future applications development and production.
Photochemical Modeling Applications
Provides access to modeling applications involving photochemical models, including modeling of ozone, particulate matter (PM), and mercury for national and regional EPA regulations such as the Clean Air Interstate Rule (CAIR) and the Clean Air Mercury Rule
Concrete compositions and methods
Chen, Irvin; Lee, Patricia Tung; Patterson, Joshua
2015-06-23
Provided herein are compositions, methods, and systems for cementitious compositions containing calcium carbonate compositions and aggregate. The compositions find use in a variety of applications, including use in a variety of building materials and building applications.
NASA Technical Reports Server (NTRS)
Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor); Weinberg, Brian (Inventor)
2011-01-01
A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., perflurocarbons, and sulfur hexafluoride. The regulations in this part 1037 apply for all new heavy-duty vehicles, except as provided in § 1037.5. This includes electric vehicles and vehicles fueled by conventional and... EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES Overview and Applicability § 1037.1 Applicability This part...
Code of Federal Regulations, 2013 CFR
2013-07-01
..., perflurocarbons, and sulfur hexafluoride. The regulations in this part 1037 apply for all new heavy-duty vehicles, except as provided in § 1037.5. This includes electric vehicles and vehicles fueled by conventional and... EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES Overview and Applicability § 1037.1 Applicability This part...
Code of Federal Regulations, 2012 CFR
2012-07-01
..., perflurocarbons, and sulfur hexafluoride. The regulations in this part 1037 apply for all new heavy-duty vehicles, except as provided in § 1037.5. This includes electric vehicles and vehicles fueled by conventional and... EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES Overview and Applicability § 1037.1 Applicability This part...
78 FR 60256 - Initial Patent Applications
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-01
... patent statutes and regulations to be issued as a patent. Most applications for patent, including new.../process/fiie/efs/guidance/New legal framework.jsp, provides a listing of patent applications and documents... declaration forms that were created to comply with the changes resulting from the Leahy-Smith America Invents...
Application Reuse Library for Software, Requirements, and Guidelines
NASA Technical Reports Server (NTRS)
Malin, Jane T.; Thronesbery, Carroll
1994-01-01
Better designs are needed for expert systems and other operations automation software, for more reliable, usable and effective human support. A prototype computer-aided Application Reuse Library shows feasibility of supporting concurrent development and improvement of advanced software by users, analysts, software developers, and human-computer interaction experts. Such a library expedites development of quality software, by providing working, documented examples, which support understanding, modification and reuse of requirements as well as code. It explicitly documents and implicitly embodies design guidelines, standards and conventions. The Application Reuse Library provides application modules with Demo-and-Tester elements. Developers and users can evaluate applicability of a library module and test modifications, by running it interactively. Sub-modules provide application code and displays and controls. The library supports software modification and reuse, by providing alternative versions of application and display functionality. Information about human support and display requirements is provided, so that modifications will conform to guidelines. The library supports entry of new application modules from developers throughout an organization. Example library modules include a timer, some buttons and special fonts, and a real-time data interface program. The library prototype is implemented in the object-oriented G2 environment for developing real-time expert systems.
A flexible software architecture for scalable real-time image and video processing applications
NASA Astrophysics Data System (ADS)
Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.
2012-06-01
Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility because they are normally oriented towards particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse and inefficient execution on multicore processors. This paper presents a novel software architecture for real-time image and video processing applications which addresses these issues. The architecture is divided into three layers: the platform abstraction layer, the messaging layer, and the application layer. The platform abstraction layer provides a high level application programming interface for the rest of the architecture. The messaging layer provides a message passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of messages. The application layer provides a repository for reusable application modules designed for real-time image and video processing applications. These modules, which include acquisition, visualization, communication, user interface and data processing modules, take advantage of the power of other well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, we present different prototypes and applications to show the possibilities of the proposed architecture.
SpectralNET – an application for spectral graph analysis and visualization
Forman, Joshua J; Clemons, Paul A; Schreiber, Stuart L; Haggarty, Stephen J
2005-01-01
Background Graph theory provides a computational framework for modeling a variety of datasets including those emerging from genomics, proteomics, and chemical genetics. Networks of genes, proteins, small molecules, or other objects of study can be represented as graphs of nodes (vertices) and interactions (edges) that can carry different weights. SpectralNET is a flexible application for analyzing and visualizing these biological and chemical networks. Results Available both as a standalone .NET executable and as an ASP.NET web application, SpectralNET was designed specifically with the analysis of graph-theoretic metrics in mind, a computational task not easily accessible using currently available applications. Users can choose either to upload a network for analysis using a variety of input formats, or to have SpectralNET generate an idealized random network for comparison to a real-world dataset. Whichever graph-generation method is used, SpectralNET displays detailed information about each connected component of the graph, including graphs of degree distribution, clustering coefficient by degree, and average distance by degree. In addition, extensive information about the selected vertex is shown, including degree, clustering coefficient, various distance metrics, and the corresponding components of the adjacency, Laplacian, and normalized Laplacian eigenvectors. SpectralNET also displays several graph visualizations, including a linear dimensionality reduction for uploaded datasets (Principal Components Analysis) and a non-linear dimensionality reduction that provides an elegant view of global graph structure (Laplacian eigenvectors). Conclusion SpectralNET provides an easily accessible means of analyzing graph-theoretic metrics for data modeling and dimensionality reduction. SpectralNET is publicly available as both a .NET application and an ASP.NET web application from . Source code is available upon request. PMID:16236170
SpectralNET--an application for spectral graph analysis and visualization.
Forman, Joshua J; Clemons, Paul A; Schreiber, Stuart L; Haggarty, Stephen J
2005-10-19
Graph theory provides a computational framework for modeling a variety of datasets including those emerging from genomics, proteomics, and chemical genetics. Networks of genes, proteins, small molecules, or other objects of study can be represented as graphs of nodes (vertices) and interactions (edges) that can carry different weights. SpectralNET is a flexible application for analyzing and visualizing these biological and chemical networks. Available both as a standalone .NET executable and as an ASP.NET web application, SpectralNET was designed specifically with the analysis of graph-theoretic metrics in mind, a computational task not easily accessible using currently available applications. Users can choose either to upload a network for analysis using a variety of input formats, or to have SpectralNET generate an idealized random network for comparison to a real-world dataset. Whichever graph-generation method is used, SpectralNET displays detailed information about each connected component of the graph, including graphs of degree distribution, clustering coefficient by degree, and average distance by degree. In addition, extensive information about the selected vertex is shown, including degree, clustering coefficient, various distance metrics, and the corresponding components of the adjacency, Laplacian, and normalized Laplacian eigenvectors. SpectralNET also displays several graph visualizations, including a linear dimensionality reduction for uploaded datasets (Principal Components Analysis) and a non-linear dimensionality reduction that provides an elegant view of global graph structure (Laplacian eigenvectors). SpectralNET provides an easily accessible means of analyzing graph-theoretic metrics for data modeling and dimensionality reduction. SpectralNET is publicly available as both a .NET application and an ASP.NET web application from http://chembank.broad.harvard.edu/resources/. Source code is available upon request.
AFM-IR: Technology and Applications in Nanoscale Infrared Spectroscopy and Chemical Imaging.
Dazzi, Alexandre; Prater, Craig B
2016-12-13
Atomic force microscopy-based infrared spectroscopy (AFM-IR) is a rapidly emerging technique that provides chemical analysis and compositional mapping with spatial resolution far below conventional optical diffraction limits. AFM-IR works by using the tip of an AFM probe to locally detect thermal expansion in a sample resulting from absorption of infrared radiation. AFM-IR thus can provide the spatial resolution of AFM in combination with the chemical analysis and compositional imaging capabilities of infrared spectroscopy. This article briefly reviews the development and underlying technology of AFM-IR, including recent advances, and then surveys a wide range of applications and investigations using AFM-IR. AFM-IR applications that will be discussed include those in polymers, life sciences, photonics, solar cells, semiconductors, pharmaceuticals, and cultural heritage. In the Supporting Information , the authors provide a theoretical section that reviews the physics underlying the AFM-IR measurement and detection mechanisms.
Pesticide Applicator Certification in Indian Country
This website provides information about the EPA Plan for the Federal Certification of Applicators of Restricted Use Pesticides within Indian Country, including plan requirements, how to become certified, how to register for training, and who is certified.
Paladin® EC (Dimethyl Disulfide, DMDS) Fumigant Safe Handling Guide
Certified pesticide applicators are required to provide safety information to handlers working in an application block or buffer zone, including instruction on personal protective equipment, air monitoring, respiratory protection, and exposure mitigation.
NASA Technical Reports Server (NTRS)
Ng, Carolyn; Stonesifer, G. Richard
1989-01-01
The main purpose of the data catalog series is to provide descriptive references to data generated by space science flight missions. The data sets described include all of the actual holdings of the Space Science Data Center (NSSDC), all data sets for which direct contact information is available, and some data collections held and serviced by foreign investigators, NASA and other U.S. government agencies. This volume contains narrative descriptions of data sets from meteorological and terrestrial applications spacecraft and investigations. The following spacecraft series are included: Mariner, Pioneer, Pioneer Venus, Venera, Viking, Voyager, and Helios. Separate indexes to the planetary and interplanetary missions are also provided.
Virtual Reality for Training and Lifelong Learning
ERIC Educational Resources Information Center
Mellet-d'Huart, Daniel
2009-01-01
This article covers the application of virtual reality (VR) to training and lifelong learning. A number of considerations concerning the design of VR applications are included. The introduction is dedicated to the more general aspects of applying VR to training. From multiple perspectives, we will provide an overview of existing applications with…
47 CFR 1.923 - Content of applications.
Code of Federal Regulations, 2011 CFR
2011-10-01
... (TINs). Wireless applicants and licensees, including all attributable owners of auctionable licenses as defined by § 1.2112 of this part, are required to provide their Taxpayer Identification Numbers (TINS) (as... (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of collecting and...
47 CFR 1.923 - Content of applications.
Code of Federal Regulations, 2010 CFR
2010-10-01
... (TINs). Wireless applicants and licensees, including all attributable owners of auctionable licenses as defined by § 1.2112 of this part, are required to provide their Taxpayer Identification Numbers (TINS) (as... (DCIA). Under the DCIA, the FCC may use an applicant or licensee's TIN for purposes of collecting and...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-31
... of multiple mandatory documents including: (1) a PDF fillable Applicant intake form; (2) a Microsoft Excel Workbook; (3) a Microsoft Word Narrative template; and (4) other mandatory attachments. (Applicants must use the Microsoft Word Narrative template the CDFI Fund provides; alternative templates...
11 CFR 9008.3 - Eligibility for payments; registration and reporting.
Code of Federal Regulations, 2010 CFR
2010-01-01
... application statement. Any changes in the information provided in the application statement must be reported to the Commission within 10 days following the change. The application statement shall include: (i... designated by the national committee to sign requests for payments; and (v) The name and address of the...
11 CFR 9008.3 - Eligibility for payments; registration and reporting.
Code of Federal Regulations, 2011 CFR
2011-01-01
... application statement. Any changes in the information provided in the application statement must be reported to the Commission within 10 days following the change. The application statement shall include: (i... designated by the national committee to sign requests for payments; and (v) The name and address of the...
Web-Based Intelligent E-Learning Systems: Technologies and Applications
ERIC Educational Resources Information Center
Ma, Zongmin
2006-01-01
Collecting and presenting the latest research and development results from the leading researchers in the field of e-learning systems, Web-Based Intelligent E-Learning Systems: Technologies and Applications provides a single record of current research and practical applications in Web-based intelligent e-learning systems. This book includes major…
Application of the aeronautical mobile satellite service (AMSS) and the providers of the service
NASA Astrophysics Data System (ADS)
Brangier, Francis
1991-07-01
The paper describes the different potential users of the AMSS, their requirements, and foreseen applications. The AMSS will be provided by several satellite-communication organizations, including INMARSAT, ARINC, SITA, and various national companies. Consideration is given to air-traffic-control services, aircraft operations communication, administrative communication, passenger communication services, and the problem of compatibility among these components.
Baseline Testing of the Ultracapacitor Enhanced Photovoltaic Power Station
NASA Technical Reports Server (NTRS)
Eichenberg, Dennis J.; Kolacz, John S.; Tavernelli, Paul F.
2001-01-01
The NASA John H. Glenn Research Center is developing an advanced ultracapacitor enhanced photovoltaic power station. Goals of this effort include maximizing photovoltaic power generation efficiency and extending the life of photovoltaic energy storage systems. Unique aspects of the power station include the use of a solar tracker, and ultracapacitors for energy storage. The photovoltaic power station is seen as a way to provide electric power in remote locations that would otherwise not have electric power, provide independence form utility systems, reduce pollution, reduce fossil fuel consumption, and reduce operating costs. The work was done under the Hybrid Power Management (HPM) Program, which includes the Hybrid Electric Transit Bus (HETB), and the E-Bike. The power station complements the E-Bike extremely well in that it permits the charging of the vehicle batteries in remote locations. Other applications include scientific research and medical power sources in isolated regions. The power station is an inexpensive approach to advance the state of the art in power technology in a practical application. The project transfers space technology to terrestrial use via nontraditional partners, and provides power system data valuable for future space applications. A description of the ultracapacitor enhanced power station, the results of performance testing and future power station development plans is the subject of this report. The report concludes that the ultracapacitor enhanced power station provides excellent performance, and that the implementation of ultracapacitors in the power system can provide significant performance improvements.
Thermoelectric applications as related to biomedical engineering for NASA Johnson Space Center
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kramer, C.D.
1997-07-01
This paper presents current NASA biomedical developments and applications using thermoelectrics. Discussion will include future technology enhancements that would be most beneficial to the application of thermoelectric technology. A great deal of thermoelectric applications have focused on electronic cooling. As with all technological developments within NASA, if the application cannot be related to the average consumer, the technology will not be mass-produced and widely available to the public (a key to research and development expenditures and thermoelectric companies). Included are discussions of thermoelectric applications to cool astronauts during launch and reentry. The earth-based applications, or spin-offs, include such innovations asmore » tank and race car driver cooling, to cooling infants with high temperatures, as well as, the prevention of hair loss during chemotherapy. In order to preserve the scientific value of metabolic samples during long-term space missions, cooling is required to enable scientific studies. Results of one such study should provide a better understanding of osteoporosis and may lead to a possible cure for the disease. In the space environment, noise has to be kept to a minimum. In long-term space applications such as the International Space Station, thermoelectric technology provides the acoustic relief and the reliability for food, as well as, scientific refrigeration/freezers. Applications and future needs are discussed as NASA moves closer to a continued space presence in Mir, International Space Station, and Lunar-Mars Exploration.« less
NASA Technical Reports Server (NTRS)
Poley, W. A.; Stevens, G. H.; Stevenson, S. M.; Lekan, J.; Arth, C. H.; Hollansworth, J. E.; Miller, E. F.
1986-01-01
This is a response to a Space Applications Advisory Committee (SAAC) request for information about the status and trends in satellite communications, to be used to support efforts to conceive and recommend long range goals for NASA communications activities. Included in this document are assessments of: (1) the outlook for satellite communications, including current applications, potential future applications, and impact of the changing environment such as optical fiber networks, the Integrated Services Digital Network (ISDN) standard, and the rapidly growing market for Very Small Aperture Terminals (VSAT); (2) the restrictions imposed by our limited spectrum resource; and (3) technology needs indicated by future trends. Potential future systems discussed include: large powerful satellites for providing personal communications; VSAT compatible satellites with onboard switching and having voice capability; large satellites which offer a pervasive T1 network service (primarily for video-phone); and large geostationary communications facilities which support common use by several carriers. Also, discussion is included of NASA particular needs and possible future systems. Based on the mentioned system concepts, specific technology recommendations are provided for the time frames of now - 1993, 1994 - 2000, and 2000 - 2010.
Complying with Required State and Tribal Notification before Soil Fumigations
Fumigant pesticide applicators must check here to determine whether they must provide advance notice, including application block locations and EPA registration number of fumigant product, to state or tribal agencies governing the planned treatment area.
Developing An Internship Program.
ERIC Educational Resources Information Center
Chase, Valerie
1984-01-01
Provided are suggestions for developing museum/aquarium internship programs. These include writing detailed job descriptions, advertising, designing application forms asking all the information needed, supervising the interns, interviewing applicants as they were applying for a paid position, and others. (JN)
Hand tools: A complization. [for industrial application
NASA Technical Reports Server (NTRS)
1974-01-01
Technical information is provided for recent developments in hand tools for assembly and disassembly application, for materials finishing, and for inspection, analysis, and testing. Photographs or diagrams accompany each description and patent information is included with several articles.
Safety Information for Handlers of Pesticide Soil Fumigants
Certified applicators are required to provide this training to handlers in an application block or buffer zone. Information must include signs and symptoms of exposure, and where to find the Fumigant Management Plan and Worker Protection Standard.
Nanoparticle-based gas sensors and methods of using the same
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mickelson, William; Zettl, Alex
Gas sensors are provided. The gas sensors include a gas sensing element having metal oxide nanoparticles and a thin-film heating element. Systems that include the gas sensors, as well as methods of using the gas sensors, are also provided. Embodiments of the present disclosure find use in a variety of different applications, including detecting whether an analyte is present in a gaseous sample.
CMOS imager for pointing and tracking applications
NASA Technical Reports Server (NTRS)
Sun, Chao (Inventor); Pain, Bedabrata (Inventor); Yang, Guang (Inventor); Heynssens, Julie B. (Inventor)
2006-01-01
Systems and techniques to realize pointing and tracking applications with CMOS imaging devices. In general, in one implementation, the technique includes: sampling multiple rows and multiple columns of an active pixel sensor array into a memory array (e.g., an on-chip memory array), and reading out the multiple rows and multiple columns sampled in the memory array to provide image data with reduced motion artifact. Various operation modes may be provided, including TDS, CDS, CQS, a tracking mode to read out multiple windows, and/or a mode employing a sample-first-read-later readout scheme. The tracking mode can take advantage of a diagonal switch array. The diagonal switch array, the active pixel sensor array and the memory array can be integrated onto a single imager chip with a controller. This imager device can be part of a larger imaging system for both space-based applications and terrestrial applications.
Variable volume combustor with aerodynamic support struts
Ostebee, Heath Michael; Johnson, Thomas Edward; Stewart, Jason Thurman; Keener, Christopher Paul
2017-03-07
The present application provides a combustor for use with a gas turbine engine. The combustor may include a number of micro-mixer fuel nozzles and a fuel injection system for providing a flow of fuel to the micro-mixer fuel nozzles. The fuel injection system may include a number of support struts supporting the fuel nozzles and providing the flow of fuel therethrough. The support struts may include an aerodynamic contoured shape so as to distribute evenly a flow of air to the micro-mixer fuel nozzles.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Williamson, Richard L.; Kochunas, Brendan; Adams, Brian M.
The Virtual Environment for Reactor Applications components included in this distribution include selected computational tools and supporting infrastructure that solve neutronics, thermal-hydraulics, fuel performance, and coupled neutronics-thermal hydraulics problems. The infrastructure components provide a simplified common user input capability and provide for the physics integration with data transfer and coupled-physics iterative solution algorithms.
Contributions and Future of Radioisotopes in Medical, Industrial and Space Applications
DOE R&D Accomplishments Database
Tingey, G. L.; Dix, G. P.; Wahlquist, E. J.
1990-11-01
There are 333 isotopes that have a half-life between 1 day and 100,000 years that have a wide variety of applications including public health, medicine,industrial technology, food technology and packaging, agriculture, energy supply, and national security. This paper provides an overview of some of the most extensive applications of radioisotopes including some observations of future uses. Examples are discussed that indicate that the use of radioisotopes is almost unlimited and will continue to grow. There is a growing need for future applications development and production. 12 refs., 1 tab. (BM)
Open systems storage platforms
NASA Technical Reports Server (NTRS)
Collins, Kirby
1992-01-01
The building blocks for an open storage system includes a system platform, a selection of storage devices and interfaces, system software, and storage applications CONVEX storage systems are based on the DS Series Data Server systems. These systems are a variant of the C3200 supercomputer with expanded I/O capabilities. These systems support a variety of medium and high speed interfaces to networks and peripherals. System software is provided in the form of ConvexOS, a POSIX compliant derivative of 4.3BSD UNIX. Storage applications include products such as UNITREE and EMASS. With the DS Series of storage systems, Convex has developed a set of products which provide open system solutions for storage management applications. The systems are highly modular, assembled from off the shelf components with industry standard interfaces. The C Series system architecture provides a stable base, with the performance and reliability of a general purpose platform. This combination of a proven system architecture with a variety of choices in peripherals and application software allows wide flexibility in configurations, and delivers the benefits of open systems to the mass storage world.
NASA Astrophysics Data System (ADS)
Kassin, A.; Cody, R. P.; Barba, M.; Escarzaga, S. M.; Score, R.; Dover, M.; Gaylord, A. G.; Manley, W. F.; Habermann, T.; Tweedie, C. E.
2015-12-01
The Arctic Research Mapping Application (ARMAP; http://armap.org/) is a suite of online applications and data services that support Arctic science by providing project tracking information (who's doing what, when and where in the region) for United States Government funded projects. In collaboration with 17 research agencies, project locations are displayed in a visually enhanced web mapping application. Key information about each project is presented along with links to web pages that provide additional information. The mapping application includes new reference data layers and an updated ship tracks layer. Visual enhancements are achieved by redeveloping the front-end from FLEX to HTML5 and JavaScript, which now provide access to mobile users utilizing tablets and cell phone devices. New tools have been added that allow users to navigate, select, draw, measure, print, use a time slider, and more. Other module additions include a back-end Apache SOLR search platform that provides users with the capability to perform advance searches throughout the ARMAP database. Furthermore, a new query builder interface has been developed in order to provide more intuitive controls to generate complex queries. These improvements have been made to increase awareness of projects funded by numerous entities in the Arctic, enhance coordination for logistics support, help identify geographic gaps in research efforts and potentially foster more collaboration amongst researchers working in the region. Additionally, ARMAP can be used to demonstrate past, present, and future research efforts supported by the U.S. Government.
Material for magnetostrictive sensors and other applications based on ferrite materials
McCallum, R. William; Snyder, John E.; Dennis, Kevin W.; Schwichtenberg, Carl R.; Jiles, David C.
2000-07-25
The present invention provides magnetostrictive compositions that include an oxide ferrite which provides mechanical properties that make the magnetostrictive compositions effective for use as sensors and actuators.
Metro Optical Networks for Homeland Security
NASA Astrophysics Data System (ADS)
Bechtel, James H.
Metro optical networks provide an enticing opportunity for strengthening homeland security. Many existing and emerging fiber-optic networks can be adapted for enhanced security applications. Applications include airports, theme parks, sports venues, and border surveillance systems. Here real-time high-quality video and captured images can be collected, transported, processed, and stored for security applications. Video and data collection are important also at correctional facilities, courts, infrastructure (e.g., dams, bridges, railroads, reservoirs, power stations), and at military and other government locations. The scaling of DWDM-based networks allows vast amounts of data to be collected and transported including biometric features of individuals at security check points. Here applications will be discussed along with potential solutions and challenges. Examples of solutions to these problems are given. This includes a discussion of metropolitan aggregation platforms for voice, video, and data that are SONET compliant for use in SONET networks and the use of DWDM technology for scaling and transporting a variety of protocols. Element management software allows not only network status monitoring, but also provides optimized allocation of network resources through the use of optical switches or electrical cross connects.
15 CFR 0.735-3 - Applicability.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Applicability. 0.735-3 Section 0.735-3... General Provisions § 0.735-3 Applicability. This part applies to all persons included within the term “employee” as defined in § 0.735-4, except as otherwise provided in this part. ...
ERIC Educational Resources Information Center
What Works Clearinghouse, 2013
2013-01-01
This study examined the effects of providing low-income, high-achieving high school seniors with college application guidance and information about the costs of college. The "application guidance" included information about deadlines and requirements for college applications at nearby institutions, at the state's flagship institution, and at in-…
18 CFR 16.10 - Information to be provided by an applicant for new license: Filing requirements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... applicant's operating and load characteristics; and (C) The communities served or to be served, including... the contributions from the applicant's generation, purchases, and load modification measures (such as...; and (C) If load management measures are not viewed as resources, the effects of such measures on the...
18 CFR 16.10 - Information to be provided by an applicant for new license: Filing requirements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... applicant's operating and load characteristics; and (C) The communities served or to be served, including... the contributions from the applicant's generation, purchases, and load modification measures (such as...; and (C) If load management measures are not viewed as resources, the effects of such measures on the...
18 CFR 16.10 - Information to be provided by an applicant for new license: Filing requirements.
Code of Federal Regulations, 2014 CFR
2014-04-01
... applicant's operating and load characteristics; and (C) The communities served or to be served, including... the contributions from the applicant's generation, purchases, and load modification measures (such as...; and (C) If load management measures are not viewed as resources, the effects of such measures on the...
18 CFR 16.10 - Information to be provided by an applicant for new license: Filing requirements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... applicant's operating and load characteristics; and (C) The communities served or to be served, including... the contributions from the applicant's generation, purchases, and load modification measures (such as...; and (C) If load management measures are not viewed as resources, the effects of such measures on the...
18 CFR 16.10 - Information to be provided by an applicant for new license: Filing requirements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... applicant's operating and load characteristics; and (C) The communities served or to be served, including... the contributions from the applicant's generation, purchases, and load modification measures (such as...; and (C) If load management measures are not viewed as resources, the effects of such measures on the...
14 CFR § 1214.401 - Applicability.
Code of Federal Regulations, 2014 CFR
2014-01-01
... Space Station Crew § 1214.401 Applicability. This subpart applies to all persons provided by NASA for flight to the International Space Station, including U.S. Government employees, uniformed members of the... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Applicability. § 1214.401 Section § 1214...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Quinlan, D.; Yi, Q.; Buduc, R.
2005-02-17
ROSE is an object-oriented software infrastructure for source-to-source translation that provides an interface for programmers to write their own specialized translators for optimizing scientific applications. ROSE is a part of current research on telescoping languages, which provides optimizations of the use of libraries in scientific applications. ROSE defines approaches to extend the optimization techniques, common in well defined languages, to the optimization of scientific applications using well defined libraries. ROSE includes a rich set of tools for generating customized transformations to support optimization of applications codes. We currently support full C and C++ (including template instantiation etc.), with Fortran 90more » support under development as part of a collaboration and contract with Rice to use their version of the open source Open64 F90 front-end. ROSE represents an attempt to define an open compiler infrastructure to handle the full complexity of full scale DOE applications codes using the languages common to scientific computing within DOE. We expect that such an infrastructure will also be useful for the development of numerous tools that may then realistically expect to work on DOE full scale applications.« less
Heterofunctional nanomaterials: fabrication, properties and applications in nanobiotechnology.
Kumart, S Anil; Khan, M I
2010-07-01
Nanotechnology and nanoengineering includes a novel class of materials that are gaining significant recognition to pursuit technological/biological advances in diverse fields including, biology, medicine, electronics, engineering etc. due to their unique size- and shape-dependent intrinsic physicochemical, optoelectronic and biological properties. Characteristics such as high surface to volume ratios and quantum confinement results in materials that are qualitatively different from their bulk counterparts. These properties not only make them suitable for numerous applications in existing and emerging technologies, but also have outstanding role in many fields that provide inspiration for their fabrication. In Today's trend nanotechnology is spreading vigorously where researchers all over the world are focusing towards their synthesis and applications. Therefore, this review is helpful for the researchers in the field of nanobiotechnology/nanomedicine, providing a brief overview of nanotechnology, covering nanomaterial synthesis methods (with emphasis on environmentally benign greener approaches), their properties, and applications; such as drug delivery, bio-labeling, nanotoxicity etc. The influence of synthesis methods and surface coatings/stabilizing agents and their subsequent applications is discussed, and a broad outline on the biomedical applications into which they have been implemented is also presented.
ERIC Educational Resources Information Center
He, Shaoyi
2003-01-01
Provides a brief survey of informatics, defined as the application of information technology to various fields, with respect to its historical background, disciplinary identity, fundamental aspects, applications, and challenges. Highlights include biological, clinical, dental, environmental, geomatics, health, legal, management, medical, museum,…
5 CFR 950.203 - Public accountability standards.
Code of Federal Regulations, 2010 CFR
2010-01-01
... insure organizations wishing to solicit donations from Federal employees in the workplace are portraying... conducting activities affecting, human health and welfare. The organization's application must provide... organization's most recent annual audited financial statements must be included with the application. The...
NASA Technical Reports Server (NTRS)
2002-01-01
This report presents three-year accomplishments from the national program on Commercial Remote Sensing and Geospatial Technology (CRSGT) application to transportation, administered by the U.S. Department of Transportation (U.S. DOT) in collaboration with the National Aeronautics and Space Administration (NASA). The joint program was authorized under Section 5113 of the Transportation Equity Act for the 21st Century (TEA-21). This is the first national program of its type focusing on transportation applications of emerging commercial remote sensing technologies. U.S. DOT's Research and Special Programs Administration manages the program in coordination with NASA's Earth Science Enterprise's application programs. The program focuses on applications of CRSGT products and systems for providing smarter and more efficient transportation operations and services. The program is performed in partnership with four major National Consortia for Remote Sensing in Transportation (NCRST). Each consortium focuses on research and development of products in one of the four priority areas for transportation application, and includes technical application and demonstration projects carried out in partnership with industries and service providers in their respective areas. The report identifies products and accomplishments from each of the four consortia in meeting the goal of providing smarter and more efficient transportation services. The products and results emerging from the program are being implemented in transportation operations and services through state and local agencies. The Environmental Assessment and Application Consortium (NCRST-E) provides leadership for developing and deploying cost effective environmental and transportation planning services, and integrates CRSGT advances for achieving smarter and cost effective corridor planning. The Infrastructure Management Consortium (NCRST-I) provides leadership in technologies that achieve smarter and cheaper ways of managing transportation infrastructure assets, operation, and inspection, and integrates CRSGT advances for achieving infrastructure security. The Traffic Flow Consortium (NCRST-F) provides leadership to develop new tools for regional traffic flow management including heavy vehicles and intermodal flow of freight, and integrates CRSGT advances for complementing and extending the reach of ITS user services. The Safety, Hazards and Disasters (NCRST-H) provides leadership for deploying remote sensing technology to locate transportation hazards and improve disaster recovery, and integrates CRSGT advances for application to protect transportation systems from terrorism. The DOT-NASA team is proud to present this report of accomplishments on products and results emerging from the joint program for application to transportation practice.
Pyrolyzed-parylene based sensors and method of manufacture
NASA Technical Reports Server (NTRS)
Tai, Yu-Chong (Inventor); Liger, Matthieu (Inventor); Miserendino, Scott (Inventor); Konishi, Satoshi (Inventor)
2007-01-01
A method (and resulting structure) for fabricating a sensing device. The method includes providing a substrate comprising a surface region and forming an insulating material overlying the surface region. The method also includes forming a film of carbon based material overlying the insulating material and treating to the film of carbon based material to pyrolyzed the carbon based material to cause formation of a film of substantially carbon based material having a resistivity ranging within a predetermined range. The method also provides at least a portion of the pyrolyzed carbon based material in a sensor application and uses the portion of the pyrolyzed carbon based material in the sensing application. In a specific embodiment, the sensing application is selected from chemical, humidity, piezoelectric, radiation, mechanical strain or temperature.
ERIC Educational Resources Information Center
Cochrane, Pauline Atherton, Ed.; Johnson, Eric H., Ed.
This proceedings represents and documents in part the 16 presentations made at the 34th Annual Clinic on Library Applications of Data Processing. World Wide Web URLs that provide insight into each presentation are included. Presentations include: (1) "Hypostatizing Data Collections, Especially Bibliographic: Abstractions, Representations,…
Hardware Acceleration for Cyber Security
2010-11-01
perform different approaches. It includes behavioral analysis, by means of NetFlow monitoring, as well as packet content analysis, so called Deep...Interface (API). The example of such application is NetFlow exporter described in [5]. • We provide modified libpcap library using libsze2 API. This...cards. The software applications using NIFIC include FlowMon NetFlow /IPFIX generator, Wireshark packet analyzer, iptables - Linux kernel firewall, deep
78 FR 24239 - Temporary Mailing Promotion
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-24
... providers that do not have their own permit imprints. To include them in the promotion, the Postal Service intends to allow the mail service providers to apply for a permit imprint without paying the application...
Material for magnetostrictive sensors and other applications based on ferrite materials
McCallum, R. William; Snyder, John E.; Dennis, Kevin W.; Schwichtenberg, Carl R.; Jiles, David C.
2002-03-05
The present invention provides magnetostrictive composites that include an oxide ferrite and metallic binders which provides mechanical properties that make the magnetostrictive compositions effective for use as sensors and actuators.
Similarity networks as a knowledge representation for space applications
NASA Technical Reports Server (NTRS)
Bailey, David; Thompson, Donna; Feinstein, Jerald
1987-01-01
Similarity networks are a powerful form of knowledge representation that are useful for many artificial intelligence applications. Similarity networks are used in applications ranging from information analysis and case based reasoning to machine learning and linking symbolic to neural processing. Strengths of similarity networks include simple construction, intuitive object storage, and flexible retrieval techniques that facilitate inferencing. Therefore, similarity networks provide great potential for space applications.
Twin-Mirrored-Galvanometer Laser-Light-Sheet Generator
NASA Technical Reports Server (NTRS)
Rhodes, David B.; Franke, John M.; Jones, Stephen B.; Leighty, Bradley D.
1991-01-01
Multiple, rotating laser-light sheets generated to illuminate flows in wind tunnels. Designed and developed to provide flexibility and adaptability to wide range of applications. Design includes capability to control size and location of laser-light sheet in real time, to generate horizontal or vertical sheets, to sweep sheet repeatedly through volume, to generate multiple sheets with controllable separation, and to rotate single or multiple laser-light sheets. Includes electronic equipment and laser mounted on adjustable-height platform. Twin-mirrored galvanometer unit supported by tripod to reduce vibration. Other possible applications include use in construction industry to align beams of building. Artistic or display applications also possible.
Application Note: Power Grid Modeling With Xyce.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sholander, Peter E.
This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-28
... LLC Amending Rule 0 To Provide That Certain References in Exchange Rules Should Be Understood To Also... certain references in Exchange rules should be understood to also include FINRA, as applicable. The text... to provide that certain references in Exchange rules should be understood to also include FINRA, as...
Information Systems: Fact or Fiction.
ERIC Educational Resources Information Center
Bearley, William
Rising costs of programming and program maintenance have caused discussion concerning the need for generalized information systems. These would provide data base functions plus complete report writing and file maintenance capabilities. All administrative applications, including online registration, student records, and financial applications are…
Outsourcing the Portal: Another Branch in the Decision Tree.
ERIC Educational Resources Information Center
McMahon, Tim
2000-01-01
Discussion of the management of information resources in organizations focuses on the use of portal technologies to update intranet capabilities. Considers application outsourcing decisions, reviews benefits (including reducing costs) as well as concerns, and describes application service providers (ASPs). (LRW)
Applications of the Electrodynamic Tether to Interstellar Travel
NASA Technical Reports Server (NTRS)
Matloff, Gregory L.; Johnson, Les
2005-01-01
After considering relevant properties of the local interstellar medium and defining a sample interstellar mission, this paper considers possible interstellar applications of the electrodynamic tether, or EDT. These include use of the EDT to provide on-board power and affect trajectory modifications and direct application of the EDT to starship acceleration. It is demonstrated that comparatively modest EDTs can provide substantial quantities of on-board power, if combined with a large-area electron-collection device such as the Cassenti toroidal-field ramscoop. More substantial tethers can be used to accomplish large-radius thrustless turns. Direct application of the EDT to starship acceleration is apparently infeasible.
Applications of FT-IR spectrophotometry in cancer diagnostics.
Bunaciu, Andrei A; Hoang, Vu Dang; Aboul-Enein, Hassan Y
2015-01-01
This review provides a brief background to the application of infrared spectroscopy, including Fourier transform-infrared spectroscopy, in biological fluids. It is not meant to be complete or exhaustive but to provide the reader with sufficient background for selected applications in cancer diagnostics. Fourier transform-infrared spectroscopy (FT-IR) is a fast and nondestructive analytical method. The infrared spectrum of a mixture serves as the basis to quantitate its constituents, and a number of common clinical chemistry tests have proven to be feasible using this approach. This review focuses on biomedical FT-IR applications, published in the period 2009-2013, used for early detection of cancer through qualitative and quantitative analysis.
Crosscutting Airborne Remote Sensing Technologies for Oil and Gas and Earth Science Applications
NASA Technical Reports Server (NTRS)
Aubrey, A. D.; Frankenberg, C.; Green, R. O.; Eastwood, M. L.; Thompson, D. R.; Thorpe, A. K.
2015-01-01
Airborne imaging spectroscopy has evolved dramatically since the 1980s as a robust remote sensing technique used to generate 2-dimensional maps of surface properties over large spatial areas. Traditional applications for passive airborne imaging spectroscopy include interrogation of surface composition, such as mapping of vegetation diversity and surface geological composition. Two recent applications are particularly relevant to the needs of both the oil and gas as well as government sectors: quantification of surficial hydrocarbon thickness in aquatic environments and mapping atmospheric greenhouse gas components. These techniques provide valuable capabilities for petroleum seepage in addition to detection and quantification of fugitive emissions. New empirical data that provides insight into the source strength of anthropogenic methane will be reviewed, with particular emphasis on the evolving constraints enabled by new methane remote sensing techniques. Contemporary studies attribute high-strength point sources as significantly contributing to the national methane inventory and underscore the need for high performance remote sensing technologies that provide quantitative leak detection. Imaging sensors that map spatial distributions of methane anomalies provide effective techniques to detect, localize, and quantify fugitive leaks. Airborne remote sensing instruments provide the unique combination of high spatial resolution (<1 m) and large coverage required to directly attribute methane emissions to individual emission sources. This capability cannot currently be achieved using spaceborne sensors. In this study, results from recent NASA remote sensing field experiments focused on point-source leak detection, will be highlighted. This includes existing quantitative capabilities for oil and methane using state-of-the-art airborne remote sensing instruments. While these capabilities are of interest to NASA for assessment of environmental impact and global climate change, industry similarly seeks to detect and localize leaks of both oil and methane across operating fields. In some cases, higher sensitivities desired for upstream and downstream applications can only be provided by new airborne remote sensing instruments tailored specifically for a given application. There exists a unique opportunity for alignment of efforts between commercial and government sectors to advance the next generation of instruments to provide more sensitive leak detection capabilities, including those for quantitative source strength determination.
37 CFR 1.217 - Publication of a redacted copy of an application.
Code of Federal Regulations, 2010 CFR
2010-07-01
... translation is accurate; (3) A marked-up copy of the application showing the redactions in brackets; and (4) A... brackets; and (ii) A copy of each submission previously filed by the applicant including any desired... material in brackets. (2) In addition to providing the submission required by paragraphs (c) and (d)(1) of...
CRISPR/Cas system for yeast genome engineering: advances and applications
Stovicek, Vratislav; Holkenbrink, Carina
2017-01-01
Abstract The methods based on the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) system have quickly gained popularity for genome editing and transcriptional regulation in many organisms, including yeast. This review aims to provide a comprehensive overview of CRISPR application for different yeast species: from basic principles and genetic design to applications. PMID:28505256
Wooden Peg Game: Implementations as Both a Web App and as an Android App
ERIC Educational Resources Information Center
Martincic, Cynthia J.
2016-01-01
Mobile application development is currently an important component of CS/IS education. Because of the rapid rate of change in the mobile application field, there are many websites that provide instructional material in tutorial format, but it is difficult to find a textbook that includes mobile application programming assignments and exercises.…
Dayhoff, R E; Maloney, D L; Kenney, T J; Fletcher, R D
1991-01-01
The VA's hospital information system, the Decentralized Hospital Computer Program (DHCP), is an integrated system based on a powerful set of software tools with shared data accessible from any of its application modules. It includes many functionally specific application subsystems such as laboratory, pharmacy, radiology, and dietetics. Physicians need applications that cross these application boundaries to provide useful and convenient patient data. One of these multi-specialty applications, the DHCP Imaging System, integrates multimedia data to provide clinicians with comprehensive patient-oriented information. User requirements for cross-disciplinary image access can be studied to define needs for similar text data access. Integration approaches must be evaluated both for their ability to deliver patient-oriented text data rapidly and their ability to integrate multimedia data objects. Several potential integration approaches are described as they relate to the DHCP Imaging System.
Dayhoff, R. E.; Maloney, D. L.; Kenney, T. J.; Fletcher, R. D.
1991-01-01
The VA's hospital information system, the Decentralized Hospital Computer Program (DHCP), is an integrated system based on a powerful set of software tools with shared data accessible from any of its application modules. It includes many functionally specific application subsystems such as laboratory, pharmacy, radiology, and dietetics. Physicians need applications that cross these application boundaries to provide useful and convenient patient data. One of these multi-specialty applications, the DHCP Imaging System, integrates multimedia data to provide clinicians with comprehensive patient-oriented information. User requirements for cross-disciplinary image access can be studied to define needs for similar text data access. Integration approaches must be evaluated both for their ability to deliver patient-oriented text data rapidly and their ability to integrate multimedia data objects. Several potential integration approaches are described as they relate to the DHCP Imaging System. PMID:1807651
Dineen, Brian R; Noe, Raymond A
2009-01-01
The authors examined 2 forms of customization in a Web-based recruitment context. Hypotheses were tested in a controlled study in which participants viewed multiple Web-based job postings that each included information about multiple fit categories. Results indicated that customization of information regarding person-organization (PO), needs-supplies, and demands-abilities (DA) fit (fit information customization) and customization of the order in which these fit categories were presented (configural customization) had differential effects on outcomes. Specifically, (a) applicant pool PO and DA fit were greater when fit information customization was provided, (b) applicant pool fit in high- versus low-relevance fit categories was better differentiated when configural customization was provided, and (c) overall application rates were lower when either or both forms of customization were provided. (PsycINFO Database Record (c) 2009 APA, all rights reserved).
NASA Technical Reports Server (NTRS)
Knight, Norman F., Jr.; Rankin, Charles C.
2006-01-01
This document summarizes the STructural Analysis of General Shells (STAGS) development effort, STAGS performance for selected demonstration problems, and STAGS application problems illustrating selected advanced features available in the STAGS Version 5.0. Each problem is discussed including selected background information and reference solutions when available. The modeling and solution approach for each problem is described and illustrated. Numerical results are presented and compared with reference solutions, test data, and/or results obtained from mesh refinement studies. These solutions provide an indication of the overall capabilities of the STAGS nonlinear finite element analysis tool and provide users with representative cases, including input files, to explore these capabilities that may then be tailored to other applications.
Variable volume combustor with aerodynamic fuel flanges for nozzle mounting
DOE Office of Scientific and Technical Information (OSTI.GOV)
McConnaughhay, Johnie Franklin; Keener, Christopher Paul; Johnson, Thomas Edward
2016-09-20
The present application provides a combustor for use with a gas turbine engine. The combustor may include a number of micro-mixer fuel nozzles and a fuel injection system for providing a flow of fuel to the micro-mixer fuel nozzles. The fuel injection system may include a number of support struts supporting the fuel nozzles and for providing the flow of fuel therethrough. The fuel injection system also may include a number of aerodynamic fuel flanges connecting the micro-mixer fuel nozzles and the support struts.
Variable volume combustor with center hub fuel staging
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ostebee, Heath Michael; McConnaughhay, Johnie Franklin; Stewart, Jason Thurman
The present application and the resultant patent provide a combustor for use with a gas turbine engine. The combustor may include a number of micro-mixer fuel nozzles and a fuel injection system for providing a flow of fuel to the micro-mixer fuel nozzles. The fuel injection system may include a center hub for providing the flow of fuel therethrough. The center hub may include a first supply circuit for a first micro-mixer fuel nozzle and a second supply circuit for a second micro-mixer fuel nozzle.
Human-computer interface incorporating personal and application domains
Anderson, Thomas G [Albuquerque, NM
2011-03-29
The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.
Human-computer interface incorporating personal and application domains
Anderson, Thomas G.
2004-04-20
The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.
An Airborne Millimeter-Wave FM-CW Radar for Thickness Profiling of Freshwater Ice
1992-11-01
commercial and recreational application, including safety and trafficability surveys. A proto- type broadband millimeter wave (26.5 to 40 GHz) Frequency...and utility for ice safety and traffica- appropriate antenna for transmission. Morey (1974) bility studies. Other important applications include...resolution and a 2.7- which can provide reliable safety survey profiling for GHz center frequency, that is capable of airborne pro- the entire practical
Hydrology Applications of the GRACE missions
NASA Astrophysics Data System (ADS)
Srinivasan, M. M.; Ivins, E. R.; Jasinski, M. F.
2014-12-01
NASA and their German space agency partners have a rich history of global gravity observations beginning with the launch of the Gravity Recovery And Climate Experiment (GRACE) in 2002. The science goals of the mission include providing monthly maps of variations in the gravity field, where the major time-varying signal is due to water motion in the Earth system. GRACE has a unique ability to observe the mass flux of water movement at monthly time scales. The hydrology applications of the GRACE mission include measurements of seasonal storage of surface and subsurface water and evapotranspiration at the land-ocean-atmosphere boundary. These variables are invaluable for improved modeling and prediction of Earth system processes. Other mission-critical science objectives include measurements that are a key component of NASA's ongoing climate measuring capabilities. Successful strategies to enhance science and practical applications of the proposed GRACE-Follow On (GRACE-FO) mission, scheduled to launch in 2017, will require engaging with and facilitating between representatives in the science, societal applications, and mission planning communities. NASA's Applied Sciences Program is supporting collaboration on an applied approach to identifying communities of potential and of practice in order to identify and promote the societal benefits of these and future gravity missions. The objective is to engage applications-oriented users and organizations and enable them to envision possible applications and end-user needs as a way to increase the benefits of these missions to the nations. The focus of activities for this applications program include; engaging the science community in order to identify applications and current and potential data users, developing a written Applications Plan, conducting workshops and user tutorials, providing ready access to information via web pages, developing databases of key and interested users/scientists, creating printed materials (posters, brochures) that identify key capabilities and applications of the missions and data, and participation in key science meetings and decision support processes.
ERIC Educational Resources Information Center
Bearden, Donna; Muller, Jim
1983-01-01
In addition to turtle graphics, the Logo programing language has list and text processing capabilities that open up opportunities for word games, language programs, word processing, and other applications. Provided are examples of these applications using both Apple and MIT Logo versions. Includes sample interactive programs. (JN)
EPA, The Climate Registry, and Center for Climate and Energy Solutions provide information to assist organizations in applying for Climate Leadership Awards, including eligibility, evaluation criteria, and application content.
75 FR 19674 - Qualification of Drivers; Exemption Applications; Vision
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-15
... posts all comments received without change to http://www.regulations.gov , including any personal... applicant continues to meet the vision exemption standards. These factors provide an adequate basis for...-8646 Filed 4-14-10; 8:45 am] BILLING CODE 4910-EX-P ...
Application of ion chromatography in pharmaceutical and drug analysis.
Jenke, Dennis
2011-08-01
Ion chromatography (IC) has developed and matured into an important analytical methodology in a number of diverse applications and industries, including pharmaceuticals. This manuscript provides a review of IC applications for the determinations of active and inactive ingredients, excipients, degradation products, and impurities relevant to pharmaceutical analyses and thus serves as a resource for investigators looking for insights into the use of the IC methodology in this field of application.
Success factors for telehealth--a case study.
Moehr, J R; Schaafsma, J; Anglin, C; Pantazi, S V; Grimm, N A; Anglin, S
2006-01-01
To present the lessons learned from an evaluation of a comprehensive telehealth project regarding success factors and evaluation methodology for such projects. A recent experience with the evaluation of new telehealth services in BC, Canada, is summarized. Two domains of clinical applications, as well as educational and administrative uses, and the project environment were evaluated. In order to contribute to the success of the project, the evaluation included formative and summative approaches employing qualitative and quantitative methods with data collection from telehealth events, participants and existing databases. The evaluation had to be carried out under severe budgetary and time constraints. We therefore deliberately chose a broad ranging exploratory approach within a framework provided, and generated questions to be answered on the basis of initial observations and participant driven interviews with progressively more focused and detailed data gathering, including perusal of a variety of existing data sources. A unique feature was an economic evaluation using static simulation models. The evaluation yielded rich and detailed data, which were able to explain a number of unanticipated findings. One clinical application domain was cancelled after 6 months, the other continues. The factors contributing to success include: Focus on chronic conditions which require visual information for proper management. Involvement of established teams in regular scheduled visits or in sessions scheduled well in advance. Problems arose with: Ad hoc applications, in particular under emergency conditions. Applications that disregard established referral patterns. Applications that support only part of a unit's services. The latter leads to the service mismatch dilemma (SMMD) with the end result that even those e-health services provided are not used. The problems encountered were compounded by issues arising from the manner in which the telehealth services had been introduced, in particular the lack of time for preparation and establishment of routine use. Educational applications had significant clinical benefits. Administrative applications generated savings which exceeded the substantial capital investment and made educational and clinical applications available at variable cost. Evaluation under severe constraints can yield rich information. The identified success factors, including provision of an overarching architecture and infrastructure, strong program management, thorough needs analysis and detailing applications to match the identified needs should improve the sustainability of e-health projects. Insights gained: Existing assumptions before the study was conducted: Evaluation has to proceed from identified questions according to a rigorous experimental design. Emergency and trauma services in remote regions can and should be supported via telehealth based on video-conferencing. Educational applications of telehealth directed at providers are beneficial for recruitment and retention of providers in remote areas. Insights gained by the study: An exploratory approach to evaluation using a multiplicity of methods can yield rich and detailed information even under severe constraints. Ad hoc and emergency clinical applications of telehealth can present problems unless they are based on thorough, detailed analyses of environment and need, conform to established practice patterns and rely on established trusting collaborative relationships. Less difficult applications should be introduced before attempting to support use under emergency conditions. Educational applications are of interest beyond the provider community to patients, family and community members, and have clinical value. In large, sparsely populated areas with difficult travel conditions administrative applications by themselves generate savings that compensate for the substantial capital investment for telehealth required for clinical applications.
Franklin, Erik C; Stat, Michael; Pochon, Xavier; Putnam, Hollie M; Gates, Ruth D
2012-03-01
The genus Symbiodinium encompasses a group of unicellular, photosynthetic dinoflagellates that are found free living or in hospite with a wide range of marine invertebrate hosts including scleractinian corals. We present GeoSymbio, a hybrid web application that provides an online, easy to use and freely accessible interface for users to discover, explore and utilize global geospatial bioinformatic and ecoinformatic data on Symbiodinium-host symbioses. The novelty of this application lies in the combination of a variety of query and visualization tools, including dynamic searchable maps, data tables with filter and grouping functions, and interactive charts that summarize the data. Importantly, this application is hosted remotely or 'in the cloud' using Google Apps, and therefore does not require any specialty GIS, web programming or data programming expertise from the user. The current version of the application utilizes Symbiodinium data based on the ITS2 genetic marker from PCR-based techniques, including denaturing gradient gel electrophoresis, sequencing and cloning of specimens collected during 1982-2010. All data elements of the application are also downloadable as spatial files, tables and nucleic acid sequence files in common formats for desktop analysis. The application provides a unique tool set to facilitate research on the basic biology of Symbiodinium and expedite new insights into their ecology, biogeography and evolution in the face of a changing global climate. GeoSymbio can be accessed at https://sites.google.com/site/geosymbio/. © 2011 Blackwell Publishing Ltd.
Recent Advances in Glycerol Polymers: Chemistry and Biomedical Applications
Zhang, Heng
2015-01-01
Glycerol polymers are attracting increased attention due to the diversity of polymer compositions and architectures available. This article provides a brief chronological review on the current status of these polymers along with representative examples of their use for biomedical applications. First, we describe the underlying chemistry of glycerol, which provides access to a range of monomers for subsequent polymerizations. We then review the various synthetic methodologies to prepare glycerol-based polymers including polyethers, polycarbonates, polyesters, and so forth. Next, we describe several biomedical applications where glycerol polymers are being investigated including carriers for drug delivery, sealants or coatings for tissue repair, and agents possessing antibacterial activity. Fourth, we describe the growing market opportunity for the use of polymers in medicine. Finally we conclude and summarize the findings, as well as discuss potential opportunities for continued research efforts. PMID:25308354
Klimov, Victor I.; Hollingsworth, Jennifer A.; Crooker, Scott A.; Kim, Hyungrak
2010-06-22
Multifunctional nanocomposites are provided including a core of either a magnetic material or an inorganic semiconductor, and, a shell of either a magnetic material or an inorganic semiconductor, wherein the core and the shell are of differing materials, such multifunctional nanocomposites having multifunctional properties including magnetic properties from the magnetic material and optical properties from the inorganic semiconductor material. Various applications of such multifunctional nanocomposites are also provided.
Joining and Integration of Silicon Carbide-Based Materials for High Temperature Applications
NASA Technical Reports Server (NTRS)
Halbig, Michael C.; Singh, Mrityunjay
2016-01-01
Advanced joining and integration technologies of silicon carbide-based ceramics and ceramic matrix composites are enabling for their implementation into wide scale aerospace and ground-based applications. The robust joining and integration technologies allow for large and complex shapes to be fabricated and integrated with the larger system. Potential aerospace applications include lean-direct fuel injectors, thermal actuators, turbine vanes, blades, shrouds, combustor liners and other hot section components. Ground based applications include components for energy and environmental systems. Performance requirements and processing challenges are identified for the successful implementation different joining technologies. An overview will be provided of several joining approaches which have been developed for high temperature applications. In addition, various characterization approaches were pursued to provide an understanding of the processing-microstructure-property relationships. Microstructural analysis of the joint interfaces was conducted using optical, scanning electron, and transmission electron microscopy to identify phases and evaluate the bond quality. Mechanical testing results will be presented along with the need for new standardized test methods. The critical need for tailoring interlayer compositions for optimum joint properties will also be highlighted.
Analysis on singular spaces: Lie manifolds and operator algebras
NASA Astrophysics Data System (ADS)
Nistor, Victor
2016-07-01
We discuss and develop some connections between analysis on singular spaces and operator algebras, as presented in my sequence of four lectures at the conference Noncommutative geometry and applications, Frascati, Italy, June 16-21, 2014. Therefore this paper is mostly a survey paper, but the presentation is new, and there are included some new results as well. In particular, Sections 3 and 4 provide a complete short introduction to analysis on noncompact manifolds that is geared towards a class of manifolds-called ;Lie manifolds; -that often appears in practice. Our interest in Lie manifolds is due to the fact that they provide the link between analysis on singular spaces and operator algebras. The groupoids integrating Lie manifolds play an important background role in establishing this link because they provide operator algebras whose structure is often well understood. The initial motivation for the work surveyed here-work that spans over close to two decades-was to develop the index theory of stratified singular spaces. Meanwhile, several other applications have emerged as well, including applications to Partial Differential Equations and Numerical Methods. These will be mentioned only briefly, however, due to the lack of space. Instead, we shall concentrate on the applications to Index theory.
75 FR 78485 - Supplemental Priorities for Discretionary Grant Programs
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-15
... inviting applications without having to go through a public notice-and-comment process each time the... designed to promote student diversity, including racial and ethnic diversity, will provide significant... applicants use ``universal design for learning'' in their projects. Another commenter stated that the...
Virtual Ships: NATO Standards Development and Implementation
2009-10-01
interfaces. Such simulations were unable to be re-used for other applications because they were too application specific and too highly customised ...provides water flow field data (including water flow induced forces and moments and added masses ) to other federates that request it. Ship motion
Introduction to Software Packages. [Final Report.
ERIC Educational Resources Information Center
Frankel, Sheila, Ed.; And Others
This document provides an introduction to applications computer software packages that support functional managers in government and encourages the use of such packages as an alternative to in-house development. A review of current application areas includes budget/project management, financial management/accounting, payroll, personnel,…
23 CFR 668.213 - Application procedures.
Code of Federal Regulations, 2010 CFR
2010-04-01
... a list of projects for which emergency relief is requested. The application shall be submitted within 3 months after an Affirmative Finding. (b) The list of projects shall include emergency repairs, PE, and permanent work, and provide for each project a location, length, project number, type of...
7 CFR 1735.30 - Hardship loans.
Code of Federal Regulations, 2012 CFR
2012-01-01
... be used by the Administrator to rank, from high to low, applications that have been determined to.... (v) Distance Learning and Medical Link Facilities. Borrowers will receive 2 points for loan funds included in the application for the purpose of providing distance learning or medical link transmission...
7 CFR 1735.30 - Hardship loans.
Code of Federal Regulations, 2014 CFR
2014-01-01
... be used by the Administrator to rank, from high to low, applications that have been determined to.... (v) Distance Learning and Medical Link Facilities. Borrowers will receive 2 points for loan funds included in the application for the purpose of providing distance learning or medical link transmission...
7 CFR 1735.30 - Hardship loans.
Code of Federal Regulations, 2011 CFR
2011-01-01
... be used by the Administrator to rank, from high to low, applications that have been determined to.... (v) Distance Learning and Medical Link Facilities. Borrowers will receive 2 points for loan funds included in the application for the purpose of providing distance learning or medical link transmission...
7 CFR 1735.30 - Hardship loans.
Code of Federal Regulations, 2013 CFR
2013-01-01
... be used by the Administrator to rank, from high to low, applications that have been determined to.... (v) Distance Learning and Medical Link Facilities. Borrowers will receive 2 points for loan funds included in the application for the purpose of providing distance learning or medical link transmission...
7 CFR 1735.30 - Hardship loans.
Code of Federal Regulations, 2010 CFR
2010-01-01
... be used by the Administrator to rank, from high to low, applications that have been determined to.... (v) Distance Learning and Medical Link Facilities. Borrowers will receive 2 points for loan funds included in the application for the purpose of providing distance learning or medical link transmission...
Data processing with microcode designed with source coding
McCoy, James A; Morrison, Steven E
2013-05-07
Programming for a data processor to execute a data processing application is provided using microcode source code. The microcode source code is assembled to produce microcode that includes digital microcode instructions with which to signal the data processor to execute the data processing application.
NASA Technical Reports Server (NTRS)
Abbe, Brian S.; Pinck, Deborah S.
1995-01-01
The Advanced Communications Technology Satellite (ACTS) Mobile Terminal (AMT) experiments have provided a terminal technology testbed for the evaluation of K- and Ka-band mobile satellite communications (satcom). Such a system could prove to be highly beneficial for many different commercial and government mobile satcom users. Combining ACTS' highly concentrated spotbeams with the smaller, higher-gain Ka-band antenna technology, results in a system design that can support a much higher throughput capacity than today's commercial configurations. To date, experiments in such diverse areas as emergency medical applications, enhanced Personal Communication Services (PCS), disaster recovery assistance, military applications, and general voice and data services have already been evaluated. Other applications that will be evaluated over the next year include telemedicine, ISDN, and television network return feed. Baseline AMT performance results will be presented, including Bit Error Rate (BER) curves and mobile propagation data characterizing the K- and Ka-band mobile satcom channel. In addition, observations from many of the application-specific experiments will also be provided.
ERIC Educational Resources Information Center
Wisconsin State Dept. of Public Instruction, Madison. Bureau for Pupil Services.
This publication provides information and application forms for alcohol and other drug abuse (AODA) funding. The contents include the following: Framework for Student Services, Prevention and Wellness; Abstracts of AODA Grants; Timetable for Grants; Criteria Applicable to all State AODA Grants; Criteria Specific to Aoda Program Grant; AODA…
Future superconductivity applications in space - A review
NASA Astrophysics Data System (ADS)
Krishen, Kumar; Ignatiev, Alex
High temperature superconductor (HISC) materials and devices can provide immediate applications for many space missions. The in-space thermal environment provides an opportunity to develop, test, and apply this technology to enhance performance and reliability for many applications of crucial importance to NASA. Specifically, the technology development areas include: (1) high current power transmission, (2) microwave components, devices, and antennas, (3) microwave, optical, and infrared sensors, (4) signal processors, (5) submillimeter wave components and systems, (6) ultra stable space clocks, (7) electromagnetic launch systems, and (8) accelerometers and position sensors for flight operations. HTSC is expected to impact NASA's Lunar Bases, Mars exploration, Mission to Earth, and Planetary exploration programs providing enabling and cost-effect technology. A review of the space applications of the HTSC technology is presented. Problem areas in technology development needing special attention are identified.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-12
... Organization and provided application support and information technology services supporting the subject firm..., including on-site leased workers from Kelly Services and Cognizant Technology Solutions, Shelton... Processing Group and Systems Configuration Organization, Including On-Site Leased Workers From Kelly Services...
Pennsylvania College of Technology Sourcebook, 1996-97.
ERIC Educational Resources Information Center
Cunningham, Stephen
This report provides a statistical profile of Pennsylvania College of Technology (PCT) and its service area for 1996-97. The first two sections provide a profile and history of the college, organizational charts, and a description of the governance system. Section III provides tables on students, including numbers of applications, enrollments, and…
Pennsylvania College of Technology Sourcebook, 1993-1994.
ERIC Educational Resources Information Center
Pennsylvania Coll. of Technology, Williamsport.
This report provides a statistical profile of Pennsylvania College of Technology (Penn College) and its environment for 1993-94. The first two sections provide a profile and history of the college, organizational charts, and a description of the governance system. Section III provides tables on students, including numbers of applications,…
Ordaz-Trinidad, Nancy; Dorantes-Alvarez, Lidia; Salas-Benito, Juan
2015-01-01
Patents on phytochemicals are being registered worldwide. Such phytochemicals provide benefits to human health, and include terpenoids, phenolic compounds, alkaloids, lignin, and fiber. This review has the purpose to provide a comprehensive overview of patents published in the last five years about extraction of phytochemicals and their application in the food and pharmaceutical industry. Forty eight pa- tents were analyzed and classified in four topics of interest; 1) Extraction, 2) Functional foods, 3) Biological activity, and 4) Prevention of diseases. Extraction yield of phytochemicals is the critical step. The techniques to extract phytochemicals include enzymat- ic hydrolysis, nano-particulate precipitation, salts formation and combination of solvents; however, the use of ultrasound and microwave is increasing. Patents concerning functional foods include pediatric formulations, sport drink, and compo- sitions that produce beneficial effects. Biological activity of plant extracts tested in animals or cell cultures, as antioxidant, anti-inflammatory, anticancer activity, reduction of obesity and diabetes are presented in this review. Application of phy- tochemicals in the prevention and treatment of health disorders, such as diabetes, gastritis, enteritis, topical inflammation, macular degeneration, gingivitis, prostatic hyperplasia, urinary impairments. Patents revised include 30% methodologies for extraction of phytochemicals, 16% application of phytochem- icals in food matrixes to obtain functional foods, 18% biological activity of extracts or compounds and 36% application in the prevention and treatment of illness, which reveals a great interest to protect intellectual property concerning applica- tion of phytochemicals formulations for human health.
Machine learning applications in genetics and genomics.
Libbrecht, Maxwell W; Noble, William Stafford
2015-06-01
The field of machine learning, which aims to develop computer algorithms that improve with experience, holds promise to enable computers to assist humans in the analysis of large, complex data sets. Here, we provide an overview of machine learning applications for the analysis of genome sequencing data sets, including the annotation of sequence elements and epigenetic, proteomic or metabolomic data. We present considerations and recurrent challenges in the application of supervised, semi-supervised and unsupervised machine learning methods, as well as of generative and discriminative modelling approaches. We provide general guidelines to assist in the selection of these machine learning methods and their practical application for the analysis of genetic and genomic data sets.
KITTEN Lightweight Kernel 0.1 Beta
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pedretti, Kevin; Levenhagen, Michael; Kelly, Suzanne
2007-12-12
The Kitten Lightweight Kernel is a simplified OS (operating system) kernel that is intended to manage a compute node's hardware resources. It provides a set of mechanisms to user-level applications for utilizing hardware resources (e.g., allocating memory, creating processes, accessing the network). Kitten is much simpler than general-purpose OS kernels, such as Linux or Windows, but includes all of the esssential functionality needed to support HPC (high-performance computing) MPI, PGAS and OpenMP applications. Kitten provides unique capabilities such as physically contiguous application memory, transparent large page support, and noise-free tick-less operation, which enable HPC applications to obtain greater efficiency andmore » scalability than with general purpose OS kernels.« less
NASA Technical Reports Server (NTRS)
Koenig, John C.; Billitti, Joseph W.; Tallon, John M.
1979-01-01
Quality assurance criteria are described for manufacturers and installers of solar photovoltaic tests and applications. Quality oriented activities are outlined to be pursued by the contractor/subcontractor to assure the physical and operational quality of equipment produced is included. In the broad sense, guidelines are provided for establishing a QA organization if none exists. Mainly, criteria is provided to be considered in any PV quality assurance plan selected as appropriate by the responsible Field Center. A framework is established for a systematic approach to ensure that photovoltaic tests and applications are constructed in a timely and cost effective manner.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cuttica, John; Haefke, Cliff
The Midwest Clean Energy Application Center (CEAC) was one of eight regional centers that promoted and assisted in transforming the market for combined heat and power (CHP), waste heat to power (WHP), and district energy (DE) technologies and concepts throughout the United States between October 1, 2009 and December 31, 2013. The key services the CEACs provided included: Market Opportunity Analyses – Supporting analyses of CHP market opportunities in diverse markets including industrial, federal, institutional, and commercial sectors. Education and Outreach – Providing information on the energy and non-energy benefits and applications of CHP to state and local policy makers,more » regulators, energy end-users, trade associations and others. Information was shared on the Midwest CEAC website: www.midwestcleanergy.org. Technical Assistance – Providing technical assistance to end-users and stakeholders to help them consider CHP, waste heat to power, and/or district energy with CHP in their facility and to help them through the project development process from initial CHP screening to installation. The Midwest CEAC provided services to the Midwest Region that included the states of Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin.« less
32 CFR 202.1 - Purpose, scope, definitions, and applicability.
Code of Federal Regulations, 2011 CFR
2011-07-01
... dialogue with, and provide comments and advice to the installation's decision makers concerning environmental restoration matters. Installations shall give careful consideration to the comments provided by... program. (2) Environmental restoration shall include the identification, investigation, research and...
32 CFR 202.1 - Purpose, scope, definitions, and applicability.
Code of Federal Regulations, 2010 CFR
2010-07-01
... dialogue with, and provide comments and advice to the installation's decision makers concerning environmental restoration matters. Installations shall give careful consideration to the comments provided by... program. (2) Environmental restoration shall include the identification, investigation, research and...
Wolinski, Christophe Czeslaw [Los Alamos, NM; Gokhale, Maya B [Los Alamos, NM; McCabe, Kevin Peter [Los Alamos, NM
2011-01-18
Fabric-based computing systems and methods are disclosed. A fabric-based computing system can include a polymorphous computing fabric that can be customized on a per application basis and a host processor in communication with said polymorphous computing fabric. The polymorphous computing fabric includes a cellular architecture that can be highly parameterized to enable a customized synthesis of fabric instances for a variety of enhanced application performances thereof. A global memory concept can also be included that provides the host processor random access to all variables and instructions associated with the polymorphous computing fabric.
Human-computer interface including haptically controlled interactions
Anderson, Thomas G.
2005-10-11
The present invention provides a method of human-computer interfacing that provides haptic feedback to control interface interactions such as scrolling or zooming within an application. Haptic feedback in the present method allows the user more intuitive control of the interface interactions, and allows the user's visual focus to remain on the application. The method comprises providing a control domain within which the user can control interactions. For example, a haptic boundary can be provided corresponding to scrollable or scalable portions of the application domain. The user can position a cursor near such a boundary, feeling its presence haptically (reducing the requirement for visual attention for control of scrolling of the display). The user can then apply force relative to the boundary, causing the interface to scroll the domain. The rate of scrolling can be related to the magnitude of applied force, providing the user with additional intuitive, non-visual control of scrolling.
34 CFR 429.20 - What must an application include?
Code of Federal Regulations, 2010 CFR
2010-07-01
... ADULT EDUCATION, DEPARTMENT OF EDUCATION BILINGUAL VOCATIONAL MATERIALS, METHODS, AND TECHNIQUES PROGRAM... part must— (a) Describe the qualifications of staff responsible for the project; and (b) Provide that... supervision of the applicant. (Approved by the Office of Management and Budget under control number 1830-0013...
34 CFR 429.20 - What must an application include?
Code of Federal Regulations, 2011 CFR
2011-07-01
... ADULT EDUCATION, DEPARTMENT OF EDUCATION BILINGUAL VOCATIONAL MATERIALS, METHODS, AND TECHNIQUES PROGRAM... part must— (a) Describe the qualifications of staff responsible for the project; and (b) Provide that... supervision of the applicant. (Approved by the Office of Management and Budget under control number 1830-0013...
Perspectives on Imaging: Advanced Applications. Introduction and Overview.
ERIC Educational Resources Information Center
Lynch, Clifford A.; Lunin, Lois F.
1991-01-01
Provides an overview of six articles that address relationships between electronic imaging technology and information science. Articles discuss the areas of technology; applications in the fields of visual arts, medicine, and textile history; conceptual foundations; and future visions, including work in virtual reality and cyberspace. (LRW)
36 CFR 13.2 - Applicability and scope.
Code of Federal Regulations, 2010 CFR
2010-07-01
... regulations contained in part 13 are prescribed for the proper use and management of park areas in Alaska and... in subparts A through F govern use and management, including subsistence activities, within the park... applicable to authorized visitor service providers operating within certain park areas. The regulations in...
Pharmaceutical Applications of Ion-Exchange Resins
ERIC Educational Resources Information Center
Elder, David
2005-01-01
The historical uses of ion-exchanged resins and a summary of the basic chemical principles involved in the ion-exchanged process are discussed. Specific applications of ion-exchange are provided that include drug stabilization, pharmaceutical excipients, taste-masking agents, oral sustained-release products, topical products for local application…
76 FR 79760 - Qualification of Drivers; Exemption Applications; Vision
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-22
... posts all comments received without change to http://www.regulations.gov , including any personal... each applicant continues to meet the vision exemption requirements. These factors provide an adequate... Policy. [FR Doc. 2011-32710 Filed 12-21-11; 8:45 am] BILLING CODE 4910-EX-P ...
40 CFR 70.8 - Permit review by EPA and affected States.
Code of Federal Regulations, 2013 CFR
2013-07-01
... compatible with EPA's national database management system. (2) The Administrator may waive the requirements...) Transmission of information to the Administrator. (1) The permit program shall require that the permitting authority provide to the Administrator a copy of each permit application (including any application for...
40 CFR 70.8 - Permit review by EPA and affected States.
Code of Federal Regulations, 2014 CFR
2014-07-01
... compatible with EPA's national database management system. (2) The Administrator may waive the requirements...) Transmission of information to the Administrator. (1) The permit program shall require that the permitting authority provide to the Administrator a copy of each permit application (including any application for...
40 CFR 70.8 - Permit review by EPA and affected States.
Code of Federal Regulations, 2010 CFR
2010-07-01
... compatible with EPA's national database management system. (2) The Administrator may waive the requirements...) Transmission of information to the Administrator. (1) The permit program shall require that the permitting authority provide to the Administrator a copy of each permit application (including any application for...
40 CFR 70.8 - Permit review by EPA and affected States.
Code of Federal Regulations, 2011 CFR
2011-07-01
... compatible with EPA's national database management system. (2) The Administrator may waive the requirements...) Transmission of information to the Administrator. (1) The permit program shall require that the permitting authority provide to the Administrator a copy of each permit application (including any application for...
40 CFR 70.8 - Permit review by EPA and affected States.
Code of Federal Regulations, 2012 CFR
2012-07-01
... compatible with EPA's national database management system. (2) The Administrator may waive the requirements...) Transmission of information to the Administrator. (1) The permit program shall require that the permitting authority provide to the Administrator a copy of each permit application (including any application for...
Single-step affinity purification for fungal proteomics.
Liu, Hui-Lin; Osmani, Aysha H; Ukil, Leena; Son, Sunghun; Markossian, Sarine; Shen, Kuo-Fang; Govindaraghavan, Meera; Varadaraj, Archana; Hashmi, Shahr B; De Souza, Colin P; Osmani, Stephen A
2010-05-01
A single-step protein affinity purification protocol using Aspergillus nidulans is described. Detailed protocols for cell breakage, affinity purification, and depending on the application, methods for protein release from affinity beads are provided. Examples defining the utility of the approaches, which should be widely applicable, are included.
Medical student appraisal: applications for bedside patient education.
Markman, T M; Sampognaro, P J; Mitchell, S L; Weeks, S R; Khalifian, S; Dattilo, J R
2013-01-01
Medical students are often afforded the privilege of counselling patients. In the past resources were limited to pen and paper or anatomic models. The evolution of mobile applications allows for limitless access to resources that facilitate bedside patient education. To evaluate the utility of six applications in patient education and promote awareness of implementing mobile resources in clinical care. Six medical students rotating on various clerkships evaluated a total of six mobile applications. Strengths, limitations, and suggested uses in clinical care were identified. Applications included Meditoons™, VisiblePatient™, DrawMD™, CardioTeach™, Visual Anatomy™, and 360° Patient Education Suite™. Data was generated from narrative responses supplied by each student during their evaluation period. Bedside teaching was enhanced by professional illustrations and animations depicting anatomy and pathophysiology. Impromptu teaching was facilitated, as resources were conveniently available on a student's smartphone or tablet. The ability to annotate and modify images and subsequently email to patients was an extraordinary improvement in provider-patient communication. Universal limitations included small smartphone screens and the novelty of new technology. Mobile applications have the potential to greatly enhance patient education and simultaneously build rapport. Endless opportunities exist for their integration in clinical practice, particularly for new diagnoses, consent for procedures, and at time of discharge. Providers should be encouraged to try new applications and utilize them with patients.
Dexter, Franklin; Ledolter, Johannes; Hindman, Bradley J
2016-01-01
In this Statistical Grand Rounds, we review methods for the analysis of the diversity of procedures among hospitals, the activities among anesthesia providers, etc. We apply multiple methods and consider their relative reliability and usefulness for perioperative applications, including calculations of SEs. We also review methods for comparing the similarity of procedures among hospitals, activities among anesthesia providers, etc. We again apply multiple methods and consider their relative reliability and usefulness for perioperative applications. The applications include strategic analyses (e.g., hospital marketing) and human resource analytics (e.g., comparisons among providers). Measures of diversity of procedures and activities (e.g., Herfindahl and Gini-Simpson index) are used for quantification of each facility (hospital) or anesthesia provider, one at a time. Diversity can be thought of as a summary measure. Thus, if the diversity of procedures for 48 hospitals is studied, the diversity (and its SE) is being calculated for each hospital. Likewise, the effective numbers of common procedures at each hospital can be calculated (e.g., by using the exponential of the Shannon index). Measures of similarity are pairwise assessments. Thus, if quantifying the similarity of procedures among cases with a break or handoff versus cases without a break or handoff, a similarity index represents a correlation coefficient. There are several different measures of similarity, and we compare their features and applicability for perioperative data. We rely extensively on sensitivity analyses to interpret observed values of the similarity index.
Application Portable Parallel Library
NASA Technical Reports Server (NTRS)
Cole, Gary L.; Blech, Richard A.; Quealy, Angela; Townsend, Scott
1995-01-01
Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.
Third International Workshop on Ion Mobility Spectrometry
NASA Technical Reports Server (NTRS)
Cross, John H. (Editor)
1995-01-01
Basic research in ion mobility spectrometry has given rise to rapid advancement in hardware development and applications. The Third International Workshop on Ion Mobility Spectrometry (IMS) was held October 16-19, 1994, at Johnson Space Center to provide a forum for investigators to present the most recent results of both basic and applied IMS research. Presenters included manufacturers and various users, including military research organizations and drug enforcement agencies. Thirty papers were given in the following five sessions: Fundamental IMS Studies, Instrument Development, Hyphenated IMS Techniques, Applications, and Data Reduction and Signal Processing. Advances in hardware development, software development, and user applications are described.
Reactor cell assembly for use in spectroscopy and microscopy applications
Grindstaff, Quirinus; Stowe, Ashley Clinton; Smyrl, Norm; Powell, Louis; McLane, Sam
2015-08-04
The present disclosure provides a reactor cell assembly that utilizes a novel design and that is wholly or partially manufactured from Aluminum, such that reactions involving Hydrogen, for example, including solid-gas reactions and thermal decomposition reactions, are not affected by any degree of Hydrogen outgassing. This reactor cell assembly can be utilized in a wide range of optical and laser spectroscopy applications, as well as optical microscopy applications, including high-temperature and high-pressure applications. The result is that the elucidation of the role of Hydrogen in the reactions studied can be achieved. Various window assemblies can be utilized, such that high temperatures and high pressures can be accommodated and the signals obtained can be optimized.
45 CFR 1302.10 - Selection among applicants.
Code of Federal Regulations, 2010 CFR
2010-10-01
..., including the opportunities provided for employment of target area residents and career development for....10 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT... comprehensive child development services at the community level, including the administrative and fiscal...
Web-Based Software for Managing Research
NASA Technical Reports Server (NTRS)
Hoadley, Sherwood T.; Ingraldi, Anthony M.; Gough, Kerry M.; Fox, Charles; Cronin, Catherine K.; Hagemann, Andrew G.; Kemmerly, Guy T.; Goodman, Wesley L.
2007-01-01
aeroCOMPASS is a software system, originally designed to aid in the management of wind tunnels at Langley Research Center, that could be adapted to provide similar aid to other enterprises in which research is performed in common laboratory facilities by users who may be geographically dispersed. Included in aeroCOMPASS is Web-interface software that provides a single, convenient portal to a set of project- and test-related software tools and other application programs. The heart of aeroCOMPASS is a user-oriented document-management software subsystem that enables geographically dispersed users to easily share and manage a variety of documents. A principle of "write once, read many" is implemented throughout aeroCOMPASS to eliminate the need for multiple entry of the same information. The Web framework of aeroCOMPASS provides links to client-side application programs that are fully integrated with databases and server-side application programs. Other subsystems of aeroCOMPASS include ones for reserving hardware, tracking of requests and feedback from users, generating interactive notes, administration of a customer-satisfaction questionnaire, managing execution of tests, managing archives of metadata about tests, planning tests, and providing online help and instruction for users.
Multidisciplinary Optimization Branch Experience Using iSIGHT Software
NASA Technical Reports Server (NTRS)
Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.
1999-01-01
The Multidisciplinary Optimization (MDO) Branch at NASA Langley is investigating frameworks for supporting multidisciplinary analysis and optimization research. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. This year, the MDO Branch has gained experience with the iSIGHT framework. This paper describes experiences with four aerospace applications, including: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. Brief overviews of each problem are provided, including the number and type of disciplinary codes and computation time estimates. In addition, the optimization methods, objective functions, design variables, and constraints are described for each problem. For each case, discussions on the advantages and disadvantages of using the iSIGHT framework are provided as well as notes on the ease of use of various advanced features and suggestions for areas of improvement.
Earth Science Mobile App Development for Non-Programmers
NASA Astrophysics Data System (ADS)
Oostra, D.; Crecelius, S.; Lewis, P.; Chambers, L. H.
2012-08-01
A number of cloud based visual development tools have emerged that provide methods for developing mobile applications quickly and without previous programming experience. The MY NASA DATA (MND) team would like to begin a discussion on how we can best leverage current mobile app technologies and available Earth science datasets. The MY NASA DATA team is developing an approach based on two main ideas. The first is to teach our constituents how to create mobile applications that interact with NASA datasets; the second is to provide web services or Application Programming Interfaces (APIs) that create sources of data that educators, students and scientists can use in their own mobile app development. This framework allows data providers to foster mobile application development and interaction while not becoming a software clearing house. MY NASA DATA's research has included meetings with local data providers, educators, libraries and individuals. A high level of interest has been identified from initial discussions and interviews. This overt interest combined with the marked popularity of mobile applications in our societies has created a new channel for outreach and communications with and between the science and educational communities.
Paleomagnetism.org: An online multi-platform open source environment for paleomagnetic data analysis
NASA Astrophysics Data System (ADS)
Koymans, Mathijs R.; Langereis, Cor G.; Pastor-Galán, Daniel; van Hinsbergen, Douwe J. J.
2016-08-01
This contribution provides an overview of Paleomagnetism.org, an open-source, multi-platform online environment for paleomagnetic data analysis. Paleomagnetism.org provides an interactive environment where paleomagnetic data can be interpreted, evaluated, visualized, and exported. The Paleomagnetism.org application is split in to an interpretation portal, a statistics portal, and a portal for miscellaneous paleomagnetic tools. In the interpretation portal, principle component analysis can be performed on visualized demagnetization diagrams. Interpreted directions and great circles can be combined to find great circle solutions. These directions can be used in the statistics portal, or exported as data and figures. The tools in the statistics portal cover standard Fisher statistics for directions and VGPs, including other statistical parameters used as reliability criteria. Other available tools include an eigenvector approach foldtest, two reversal test including a Monte Carlo simulation on mean directions, and a coordinate bootstrap on the original data. An implementation is included for the detection and correction of inclination shallowing in sediments following TK03.GAD. Finally we provide a module to visualize VGPs and expected paleolatitudes, declinations, and inclinations relative to widely used global apparent polar wander path models in coordinates of major continent-bearing plates. The tools in the miscellaneous portal include a net tectonic rotation (NTR) analysis to restore a body to its paleo-vertical and a bootstrapped oroclinal test using linear regressive techniques, including a modified foldtest around a vertical axis. Paleomagnetism.org provides an integrated approach for researchers to work with visualized (e.g. hemisphere projections, Zijderveld diagrams) paleomagnetic data. The application constructs a custom exportable file that can be shared freely and included in public databases. This exported file contains all data and can later be imported to the application by other researchers. The accessibility and simplicity through which paleomagnetic data can be interpreted, analyzed, visualized, and shared makes Paleomagnetism.org of interest to the community.
A review of mobile applications to help adolescent and young adult cancer patients
Wesley, Kimberly M; Fizur, Philip J
2015-01-01
Objective To review research articles utilizing mobile applications with adolescent and young adult (AYA) cancer patients. Materials and methods We identified articles via online searches and reference lists (eg, PsycInfo, PubMed). Articles were reviewed by two study team members for target population, stated purpose, technological utilization, sample size, demographic characteristics, and outcome data. Strengths and weaknesses of each study were described. Results Of 19 identified manuscripts, six met full inclusion criteria for this review (four smartphone applications and two tablet applications). One additional article that included an application not specific to oncology but included AYA patients with cancer within the target sample was also reviewed. Uses of these applications included symptom tracking, pain management, monitoring of eating habits following bone marrow transplant, monitoring of mucositis, and improving medication management. Utility results from pilot studies are presented. Conclusion Mobile applications are growing in number and increasingly available to AYAs with and without chronic illness. These applications may prove useful in helping to support AYAs throughout their cancer treatment and beyond. However, few applications provide empirical data supporting their utility. Numerous strengths and benefits of these applications include increased accessibility to educational resources and self-management strategies, more frequent physical and emotional symptom tracking, and increased access to peer support. Despite these strengths, numerous limitations are identified, highlighting the need for future research in this area. PMID:26316835
MARVIN: a medical research application framework based on open source software.
Rudolph, Tobias; Puls, Marc; Anderegg, Christoph; Ebert, Lars; Broehan, Martina; Rudin, Adrian; Kowal, Jens
2008-08-01
This paper describes the open source framework MARVIN for rapid application development in the field of biomedical and clinical research. MARVIN applications consist of modules that can be plugged together in order to provide the functionality required for a specific experimental scenario. Application modules work on a common patient database that is used to store and organize medical data as well as derived data. MARVIN provides a flexible input/output system with support for many file formats including DICOM, various 2D image formats and surface mesh data. Furthermore, it implements an advanced visualization system and interfaces to a wide range of 3D tracking hardware. Since it uses only highly portable libraries, MARVIN applications run on Unix/Linux, Mac OS X and Microsoft Windows.
Camera systems in human motion analysis for biomedical applications
NASA Astrophysics Data System (ADS)
Chin, Lim Chee; Basah, Shafriza Nisha; Yaacob, Sazali; Juan, Yeap Ewe; Kadir, Aida Khairunnisaa Ab.
2015-05-01
Human Motion Analysis (HMA) system has been one of the major interests among researchers in the field of computer vision, artificial intelligence and biomedical engineering and sciences. This is due to its wide and promising biomedical applications, namely, bio-instrumentation for human computer interfacing and surveillance system for monitoring human behaviour as well as analysis of biomedical signal and image processing for diagnosis and rehabilitation applications. This paper provides an extensive review of the camera system of HMA, its taxonomy, including camera types, camera calibration and camera configuration. The review focused on evaluating the camera system consideration of the HMA system specifically for biomedical applications. This review is important as it provides guidelines and recommendation for researchers and practitioners in selecting a camera system of the HMA system for biomedical applications.
User-friendly technology to help family carers cope.
Chambers, Mary; Connor, Samantha L
2002-12-01
Increases in the older adult population are occurring simultaneously with a growth in new technology. Modern technology presents an opportunity to enhance the quality of life and independence of older people and their family carers through communication and access to health care information. To evaluate the usability of a multimedia software application designed to provide family carers of the elderly or disabled with information, advice and psychological support to increase their coping capacity. The interactive application consisted of an information-based package that provided carers with advice on the promotion of psychological health, including relaxation and other coping strategies. The software application also included a carer self-assessment instrument, designed to provide both family and professional carers with information to assess how family carers were coping with their care-giving role. Usability evaluation was carried out in two stages. In the first stage (verification), user trials and an evaluation questionnaire were used to refine and develop the content and usability of the multimedia software application. In the second (demonstration), stage evaluation questionnaires were used to appraise the usability of the modified software application. The findings evidenced that the majority of users found the software to be usable and informative. Some areas were highlighted for improvement in the navigation of the software. The authors conclude that with further refinement, the software application has the potential to offer information and support to those who are caring for the elderly and disabled at home.
Patient-provider connectivity and the role of e-health.
Holmes, Suzanne C; Kearns, Ellen Hope
2003-01-01
Patient-provider connectivity (PPC) offers innovative approaches to control costs, improve quality, and sustain a healthy workforce. The application of e-commerce to health care is one facet of PPC and provides solutions to educating, informing, and more efficiently using scarce resources to sustain the nation's health. Technology is available to provide real-time access to clinical results, medical records, health-care providers, and other time-sensitive patient information. This is the first article in a series on PPC that explores the application of e-commerce to the health-care industry from the consumers' and providers' points of view and examines and assesses trends and data from various interdisciplinary sources and studies. Two models exemplifying PPC are explored including the Science Business & Education, Inc., proof-of-concept patient demonstration project, and the emerging application of peer-to-peer (P2P) technology. PPC promises to improve efficiency, facilitate communication between physician and patient, monitor compliance with medical regimens, and positively affect the quality of health care provided and the overall health of the patient. Future articles will address the growth of telemedicine, issues of confidentiality and e-risk, and other PPC applications.
Chemical-Help Application for Classification and Identification of Stormwater Constituents
Granato, Gregory E.; Driskell, Timothy R.; Nunes, Catherine
2000-01-01
A computer application called Chemical Help was developed to facilitate review of reports for the National Highway Runoff Water-Quality Data and Methodology Synthesis (NDAMS). The application provides a tool to quickly find a proper classification for any constituent in the NDAMS review sheets. Chemical Help contents include the name of each water-quality property, constituent, or parameter, the section number within the NDAMS review sheet, the organizational levels within a classification hierarchy, the database number, and where appropriate, the chemical formula, the Chemical Abstract Service number, and a list of synonyms (for the organic chemicals). Therefore, Chemical Help provides information necessary to research available reference data for the water-quality properties and constituents of potential interest in stormwater studies. Chemical Help is implemented in the Microsoft help-system interface. (Computer files for the use and documentation of Chemical Help are included on an accompanying diskette.)
Green, Christine Godward; Klein, Elizabeth G
2011-01-01
Active transportation has been considered as one method to address the American obesity epidemic. To address obesity prevention through built-environment change, the local public health department in Columbus, Ohio, established the Columbus Healthy Places (CHP) program to formally promote active transportation in numerous aspects of community design for the city. In this article, we present a case study of the CHP program and discuss the review of city development rezoning applications as a successful strategy to link public health to urban planning. Prior to the CHP review, 7% of development applications in Columbus included active transportation components; in 2009, 64% of development applications adopted active transportation components specifically recommended by the CHP review. Active transportation recommendations generally included adding bike racks, widening or adding sidewalks, and providing sidewalk connectivity. Recommendations and lessons learned from CHP are provided.
300 Area waste acid treatment system closure plan
DOE Office of Scientific and Technical Information (OSTI.GOV)
LUKE, S.N.
1999-05-17
The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOERL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion includes closure plan documentation submitted for individual, treatment, storage, and/or disposal units undergoing closure, such as the 300 Area Waste Acid Treatment System. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Whenever appropriate, 300 Area Waste Acid Treatment System documentation makes cross-reference to themore » General Information Portion, rather than duplicating text. This 300 Area Waste Acid Treatment System Closure Plan (Revision 2) includes a Hanford Facility Dangerous Waste Permit Application, Part A, Form 3. Information provided in this closure plan is current as of April 1999.« less
Applications of Mass Spectrometry to Structural Analysis of Marine Oligosaccharides
Lang, Yinzhi; Zhao, Xia; Liu, Lili; Yu, Guangli
2014-01-01
Marine oligosaccharides have attracted increasing attention recently in developing potential drugs and biomaterials for their particular physical and chemical properties. However, the composition and sequence analysis of marine oligosaccharides are very challenging for their structural complexity and heterogeneity. Mass spectrometry (MS) has become an important technique for carbohydrate analysis by providing more detailed structural information, including molecular mass, sugar constituent, sequence, inter-residue linkage position and substitution pattern. This paper provides an overview of the structural analysis based on MS approaches in marine oligosaccharides, which are derived from some biologically important marine polysaccharides, including agaran, carrageenan, alginate, sulfated fucan, chitosan, glycosaminoglycan (GAG) and GAG-like polysaccharides. Applications of electrospray ionization mass spectrometry (ESI-MS) are mainly presented and the general applications of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) are also outlined. Some technical challenges in the structural analysis of marine oligosaccharides by MS have also been pointed out. PMID:24983643
Green, Christine Godward; Klein, Elizabeth G.
2011-01-01
Active transportation has been considered as one method to address the American obesity epidemic. To address obesity prevention through built-environment change, the local public health department in Columbus, Ohio, established the Columbus Healthy Places (CHP) program to formally promote active transportation in numerous aspects of community design for the city. In this article, we present a case study of the CHP program and discuss the review of city development rezoning applications as a successful strategy to link public health to urban planning. Prior to the CHP review, 7% of development applications in Columbus included active transportation components; in 2009, 64% of development applications adopted active transportation components specifically recommended by the CHP review. Active transportation recommendations generally included adding bike racks, widening or adding sidewalks, and providing sidewalk connectivity. Recommendations and lessons learned from CHP are provided. PMID:21563711
Microgravity Science and Applications Program tasks, 1988 revision
NASA Technical Reports Server (NTRS)
1989-01-01
The active research tasks as of the end of the fiscal year 1988 of the Microgravity Science and Applications Program, NASA-Office of Space Science and Applications, involving several NASA centers and other organizations are compiled. The purpose is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. Also included are an introductory description of the program, the strategy and overall goal, identification of the organizational structures and people involved, and a description of each task. A list of recent publications is provided. The tasks are grouped into six major categories: electronic materials; solidification of metals, alloys, and composites; fluid dynamics and transport phenomena; biotechnology; glasses and ceramics; and combustion. Other categories include experimental technology, general studies and surveys; foreign government affiliations; industrial affiliations; and Physics And Chemistry Experiments (PACE). The tasks are divided into ground-based and flight experiments.
Evidence-based dentistry on laser paediatric dentistry: review and outlook.
Olivi, G; Genovese, M D; Caprioglio, C
2009-03-01
The goal of paediatric dentistry is to provide preventive education to parents and patients as well as interception and therapy of dental diseases in a minimally invasive way using a stress-free approach. Different laser wavelengths are used for different applications following these minimally invasive concepts: argon, KTP, diode, Nd:YAG, and CO2 lasers are used for soft tissue applications and the erbium family is used for both soft and hard tissue procedures. This paper offers a revision and a discussion of the international literature, showing also some clinical procedures. related to these scientific studies. Soft tissues laser applications in Pediatric Dentistry include application in oral surgery as well as in periodontics and orthodontics. Laser applications on hard tissues include caries prevention and detection and application for sealing of pits and fissures. Also application for cavity preparation, carious removal and pulp therapy are discussed.
Cloud-Based Mobile Application Development Tools and NASA Science Datasets
NASA Astrophysics Data System (ADS)
Oostra, D.; Lewis, P. M.; Chambers, L. H.; Moore, S. W.
2011-12-01
A number of cloud-based visual development tools have emerged that provide methods for developing mobile applications quickly and without previous programming experience. This paper will explore how our new and current data users can best combine these cloud-based mobile application tools and available NASA climate science datasets. Our vision is that users will create their own mobile applications for visualizing our data and will develop tools for their own needs. The approach we are documenting is based on two main ideas. The first is to provide training and information. Through examples, sharing experiences, and providing workshops, users can be shown how to use free online tools to easily create mobile applications that interact with NASA datasets. The second approach is to provide application programming interfaces (APIs), databases, and web applications to access data in a way that educators, students and scientists can quickly integrate it into their own mobile application development. This framework allows us to foster development activities and boost interaction with NASA's data while saving resources that would be required for a large internal application development staff. The findings of this work will include data gathered through meetings with local data providers, educators, libraries and individuals. From the very first queries into this topic, a high level of interest has been identified from our groups of users. This overt interest, combined with the marked popularity of mobile applications, has created a new channel for outreach and communications between the science and education communities. As a result, we would like to offer educators and other stakeholders some insight into the mobile application development arena, and provide some next steps and new approaches. Our hope is that, through our efforts, we will broaden the scope and usage of NASA's climate science data by providing new ways to access environmentally relevant datasets.
Current status and future trends in turbine application of thermal barrier coatings
NASA Technical Reports Server (NTRS)
Sheffler, Keith D.; Gupta, Dinesh K.
1988-01-01
This paper provides an overview of the current status and future trends in application of thermal barrier coatings (TBC) to turbine components, and in particular to high turbine airfoils. Included are descriptions of the favorable results achieved to date with bill-of-material applications of plasma deposited TBC, and recent experience with developmental coatings applied by electron beam-physical vapor deposition.
Applications of Laser Scattering Probes to Turbulent Diffusion Flames
1983-11-01
APPLICATIONS OF LASER SCATTERING PROBES TO TURBULENT DIFFUSION FLAMES u ^ j FINAL REPORT Contract N00014-80-C-0882 Submitted to Office of...Include Security Classification) Applications of Laser Scattering Probes to Turbulent Diffusion Flames PROJECT NO. TASK NO. WORK UNIT NO. 12...for a co-flowing jet turbulent diffusion flame, and planar laser-induced fluorescence to provide two- dimensional instantaneous images of the flame
Military applications of automatic speech recognition and future requirements
NASA Technical Reports Server (NTRS)
Beek, Bruno; Cupples, Edward J.
1977-01-01
An updated summary of the state-of-the-art of automatic speech recognition and its relevance to military applications is provided. A number of potential systems for military applications are under development. These include: (1) digital narrowband communication systems; (2) automatic speech verification; (3) on-line cartographic processing unit; (4) word recognition for militarized tactical data system; and (5) voice recognition and synthesis for aircraft cockpit.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jorgensen, Gary; Gee, Randall C.; White, David
Provided are reflective thin film constructions including a reduced number of layers, which provides for increased solar-weighted hemispherical reflectance and durability. Reflective films include those comprising an ultraviolet absorbing abrasion resistant coating over a metal layer. Also provided are ultraviolet absorbing abrasion resistant coatings and methods for optimizing the ultraviolet absorption of an abrasion resistant coating. Reflective films disclosed herein are useful for solar reflecting, solar collecting, and solar concentrating applications, such as for the generation of electrical power.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keyes, D.; McInnes, L. C.; Woodward, C.
This report is an outcome of the workshop Multiphysics Simulations: Challenges and Opportunities, sponsored by the Institute of Computing in Science (ICiS). Additional information about the workshop, including relevant reading and presentations on multiphysics issues in applications, algorithms, and software, is available via https://sites.google.com/site/icismultiphysics2011/. We consider multiphysics applications from algorithmic and architectural perspectives, where 'algorithmic' includes both mathematical analysis and computational complexity and 'architectural' includes both software and hardware environments. Many diverse multiphysics applications can be reduced, en route to their computational simulation, to a common algebraic coupling paradigm. Mathematical analysis of multiphysics coupling in this form is not alwaysmore » practical for realistic applications, but model problems representative of applications discussed herein can provide insight. A variety of software frameworks for multiphysics applications have been constructed and refined within disciplinary communities and executed on leading-edge computer systems. We examine several of these, expose some commonalities among them, and attempt to extrapolate best practices to future systems. From our study, we summarize challenges and forecast opportunities. We also initiate a modest suite of test problems encompassing features present in many applications.« less
18 CFR 157.6 - Applications; general requirements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...
18 CFR 157.6 - Applications; general requirements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...
18 CFR 157.6 - Applications; general requirements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...
18 CFR 157.6 - Applications; general requirements.
Code of Federal Regulations, 2014 CFR
2014-04-01
... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...
Computer Applications in Instruction: A Teacher's Guide to Selection and Use.
ERIC Educational Resources Information Center
Edwards, Judith B.; And Others
Intended for upper elementary and secondary teachers in all subject areas, this guide provides practical advice on determining the appropriate application of computer technology and on the selection of specific, subject-related computer-based instruction units. Under the heading of hardware and software, topics discussed include communicating with…
29 CFR 75.11 - Standards for the review of applications.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Employment and Training Administration (ETA), provided that the required information is submitted by the... commercial or industrial enterprise. In transmitting such applications to ETA, RDA will include: (i) A letter...) Three copies of Form RD 449-23, Data Information Sheet. ETA will issue an affirmative certification on...
Code of Federal Regulations, 2013 CFR
2013-07-01
... section 1001(p) of Public Law 111-5). (b) Closing costs. Sellers' closing costs typically include: loan... sellers' closing costs that are customary for the region where the home is located. Applicant's realtor or lender can provide the applicant with the normal closing costs for his/her region. HAP will reimburse the...
Code of Federal Regulations, 2012 CFR
2012-07-01
... section 1001(p) of Public Law 111-5). (b) Closing costs. Sellers' closing costs typically include: loan... sellers' closing costs that are customary for the region where the home is located. Applicant's realtor or lender can provide the applicant with the normal closing costs for his/her region. HAP will reimburse the...
Code of Federal Regulations, 2011 CFR
2011-07-01
... section 1001(p) of Public Law 111-5). (b) Closing costs. Sellers' closing costs typically include: loan... sellers' closing costs that are customary for the region where the home is located. Applicant's realtor or lender can provide the applicant with the normal closing costs for his/her region. HAP will reimburse the...
Code of Federal Regulations, 2014 CFR
2014-07-01
... section 1001(p) of Public Law 111-5). (b) Closing costs. Sellers' closing costs typically include: loan... sellers' closing costs that are customary for the region where the home is located. Applicant's realtor or lender can provide the applicant with the normal closing costs for his/her region. HAP will reimburse the...
Mapping the Future Today: The Community College of Baltimore County Geospatial Applications Program
ERIC Educational Resources Information Center
Jeffrey, Scott; Alvarez, Jaime
2010-01-01
The Geospatial Applications Program at the Community College of Baltimore County (CCBC), located five miles west of downtown Baltimore, Maryland, provides comprehensive instruction in geographic information systems (GIS), remote sensing and global positioning systems (GPS). Geospatial techniques, which include computer-based mapping and remote…
13 CFR 130.410 - New applications.
Code of Federal Regulations, 2012 CFR
2012-01-01
...) An application for initial funding of a new SBDC network must include a letter by the Governor, or... operate the SBDC network; a list of the Lead Center and other SBDC service providers by name, address and... State or Regional Advisory Board and other relevant information set forth in the Program Announcement...
13 CFR 130.410 - New applications.
Code of Federal Regulations, 2014 CFR
2014-01-01
...) An application for initial funding of a new SBDC network must include a letter by the Governor, or... operate the SBDC network; a list of the Lead Center and other SBDC service providers by name, address and... State or Regional Advisory Board and other relevant information set forth in the Program Announcement...
13 CFR 130.410 - New applications.
Code of Federal Regulations, 2011 CFR
2011-01-01
...) An application for initial funding of a new SBDC network must include a letter by the Governor, or... operate the SBDC network; a list of the Lead Center and other SBDC service providers by name, address and... State or Regional Advisory Board and other relevant information set forth in the Program Announcement...
13 CFR 130.410 - New applications.
Code of Federal Regulations, 2013 CFR
2013-01-01
...) An application for initial funding of a new SBDC network must include a letter by the Governor, or... operate the SBDC network; a list of the Lead Center and other SBDC service providers by name, address and... State or Regional Advisory Board and other relevant information set forth in the Program Announcement...
ERIC Educational Resources Information Center
Carducci, Rozana
2006-01-01
The references in this document provide an overview of empirical and conceptual scholarship on the application of learning theories in community college classrooms. Specific theories discussed in the citations include: active learning, cooperative learning, multiple intelligences, problem-based learning, and self-regulated learning. In addition to…
75 FR 50799 - Qualification of Drivers; Exemption Applications; Vision
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-17
... posts all comments received without change to http://www.regulations.gov , including any personal... each applicant continues to meet the vision exemption standards. These factors provide an adequate... Policy and Program Development. [FR Doc. 2010-20226 Filed 8-16-10; 8:45 am] BILLING CODE 4910-EX-P ...
10 CFR 205.322 - Contents of application.
Code of Federal Regulations, 2014 CFR
2014-01-01
... diagrams which provide clarification of any of the above items should be included. (2) A general area map... conductor ratings; (ii) System power flow plots for the applicant's service area for heavy summer and light... is scheduled to be placed in service and for the fifth year thereafter. The power flow plots...
10 CFR 205.322 - Contents of application.
Code of Federal Regulations, 2012 CFR
2012-01-01
... diagrams which provide clarification of any of the above items should be included. (2) A general area map... conductor ratings; (ii) System power flow plots for the applicant's service area for heavy summer and light... is scheduled to be placed in service and for the fifth year thereafter. The power flow plots...
10 CFR 205.322 - Contents of application.
Code of Federal Regulations, 2013 CFR
2013-01-01
... diagrams which provide clarification of any of the above items should be included. (2) A general area map... conductor ratings; (ii) System power flow plots for the applicant's service area for heavy summer and light... is scheduled to be placed in service and for the fifth year thereafter. The power flow plots...
49 CFR 1572.5 - Standards for security threat assessments.
Code of Federal Regulations, 2011 CFR
2011-10-01
... the FMCSA rules at 49 CFR 383.51. If records indicate that an applicant has committed an offense that... assessment includes biometric identification and a biometric credential. (2) To apply for a comparability... process and provide biometric information to obtain a TWIC, if the applicant seeks unescorted access to a...
49 CFR 1572.5 - Standards for security threat assessments.
Code of Federal Regulations, 2014 CFR
2014-10-01
... the FMCSA rules at 49 CFR 383.51. If records indicate that an applicant has committed an offense that... assessment includes biometric identification and a biometric credential. (2) To apply for a comparability... process and provide biometric information to obtain a TWIC, if the applicant seeks unescorted access to a...
49 CFR 1572.5 - Standards for security threat assessments.
Code of Federal Regulations, 2010 CFR
2010-10-01
... the FMCSA rules at 49 CFR 383.51. If records indicate that an applicant has committed an offense that... assessment includes biometric identification and a biometric credential. (2) To apply for a comparability... process and provide biometric information to obtain a TWIC, if the applicant seeks unescorted access to a...
49 CFR 1572.5 - Standards for security threat assessments.
Code of Federal Regulations, 2013 CFR
2013-10-01
... the FMCSA rules at 49 CFR 383.51. If records indicate that an applicant has committed an offense that... assessment includes biometric identification and a biometric credential. (2) To apply for a comparability... process and provide biometric information to obtain a TWIC, if the applicant seeks unescorted access to a...
49 CFR 1572.5 - Standards for security threat assessments.
Code of Federal Regulations, 2012 CFR
2012-10-01
... the FMCSA rules at 49 CFR 383.51. If records indicate that an applicant has committed an offense that... assessment includes biometric identification and a biometric credential. (2) To apply for a comparability... process and provide biometric information to obtain a TWIC, if the applicant seeks unescorted access to a...
38 CFR 61.12 - Threshold requirements for capital grant applications.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Threshold requirements... OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.12 Threshold... following threshold requirements: (a) The application was completed in all parts and included the...
38 CFR 61.42 - Threshold requirements for special needs grant applications.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Threshold requirements... DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.42 Threshold... meet the following threshold requirements: (a) The application included the information called for in...
38 CFR 61.42 - Threshold requirements for special needs grant applications.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Threshold requirements... DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.42 Threshold... meet the following threshold requirements: (a) The application included the information called for in...
38 CFR 61.12 - Threshold requirements for capital grant applications.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Threshold requirements... OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.12 Threshold... following threshold requirements: (a) The application was completed in all parts and included the...
The National Capital Region closed circuit television video interoperability project.
Contestabile, John; Patrone, David; Babin, Steven
2016-01-01
The National Capital Region (NCR) includes many government jurisdictions and agencies using different closed circuit TV (CCTV) cameras and video management software. Because these agencies often must work together to respond to emergencies and events, a means of providing interoperability for CCTV video is critically needed. Video data from different CCTV systems that are not inherently interoperable is represented in the "data layer." An "integration layer" ingests the data layer source video and normalizes the different video formats. It then aggregates and distributes this video to a "presentation layer" where it can be viewed by almost any application used by other agencies and without any proprietary software. A native mobile video viewing application is also developed that uses the presentation layer to provide video to different kinds of smartphones. The NCR includes Washington, DC, and surrounding counties in Maryland and Virginia. The video sharing architecture allows one agency to see another agency's video in their native viewing application without the need to purchase new CCTV software or systems. A native smartphone application was also developed to enable them to share video via mobile devices even when they use different video management systems. A video sharing architecture has been developed for the NCR that creates an interoperable environment for sharing CCTV video in an efficient and cost effective manner. In addition, it provides the desired capability of sharing video via a native mobile application.
Early Experiences with Mobile Electronic Health Records Application in a Tertiary Hospital in Korea
Park, Minah; Hong, Eunseok; Kim, Sunhyu; Ahn, Ryeok; Hong, Jungseok; Song, Seungyeol; Kim, Tak; Kim, Jeongkeun; Yeo, Seongwoon
2015-01-01
Objectives Recent advances in mobile technology have opened up possibilities to provide strongly integrated mobile-based services in healthcare and telemedicine. Although the number of mobile Electronic Health Record (EHR) applications is large and growing, there is a paucity of evidence demonstrating the usage patterns of these mobile applications by healthcare providers. This study aimed to illustrate the deployment process for an integrated mobile EHR application and to analyze usage patterns after provision of the mobile EHR service. Methods We developed an integrated mobile application that aimed to enhance the mobility of healthcare providers by improving access to patient- and hospital-related information during their daily medical activities. The study included mobile EHR users who accessed patient healthcare records between May 2013 and May 2014. We performed a data analysis using a web server log file analyzer from the integrated EHR system. Cluster analysis was applied to longitudinal user data based on their application usage pattern. Results The mobile EHR service named M-UMIS has been in service since May 2013. Every healthcare provider in the hospital could access the mobile EHR service and view the medical charts of their patients. The frequency of using services and network packet transmission on the M-UMIS increased gradually during the study period. The most frequently accessed service in the menu was the patient list. Conclusions A better understanding regarding the adoption of mobile EHR applications by healthcare providers in patient-centered care provides useful information to guide the design and implementation of future applications. PMID:26618036
Photovoltaic system criteria documents. Volume 4: Review criteria for photovoltaic applications
NASA Technical Reports Server (NTRS)
Koenig, John C.; Billitti, Joseph W.; Tallon, John M.
1979-01-01
Guidelines are provided for the organization, preparation and conduct of program reviews for photovoltaic applications. These criteria apply to all photovoltaic applications. They include, but are not limited to, the following: (1) Conceptual design review; (2) Preliminary design review; (3) Critical design review; and (4) Operational readiness review. Contract goal's and objectives are met through program monitoring for cost, schedule, and performance for both managerial and technical elements for all PV applications activities.
36 Years of Remote Oceanographic Laser Fluorosensing: Findings, Challenges and Pathways to Explore
NASA Astrophysics Data System (ADS)
Chekalyuk, A. M.
2009-12-01
Since its initial bright start in early 70s, the oceanographic applications of laser remote fluorosensing have been mostly driven by the enthusiastic laser geeks, who tried to transfer the recent technological advances from their laboratory breadboards to the real world. This communication provides an overview of the key milestones and advances in the oceanographic applications of remote laser fluorosensing that is used for qualitative and quantitative characterization of the key aquatic constituents, including chromophoric dissolved organic matter, phytoplankton pigments, their biomass, community structure, and photo-physiological status. The basic principles and analytical techniques, including fluorescence excitation and emission measurements, as well as active control over the media to retrieve additional information (“super-active remote sensing”), are briefly discussed and illustrated with examples of practical applications. The laser excitation sources (including solid state, tunable lasers and optical parametric oscillators) and signal detectors and analyzers (including multi-spectral and hyperspectral systems) are discussed. The advantages and limitations of various platforms (stationary settings, ships, airplanes, helicopters, unmanned autonomous vehicles (UAV), and satellites) are analyzed. The recent findings, methodological and technological developments in oceanographic applications of laser fluorescence indicate that there is a significant, still underexplored potential of remote fluorosensing that may provide new observational capabilities and serve as a useful tool for oceanographic research, bio-environmental monitoring, and validation of passive satellite retrievals.
mHealth Education Applications Along the Cancer Continuum.
Davis, Sharon Watkins; Oakley-Girvan, Ingrid
2015-06-01
The majority of adults worldwide own a mobile phone, including those in under-resourced communities. Mobile health (mhealth) education technologies present a promising mechanism for improving cancer prevention, treatment, and follow-up. The purpose of this study was to summarize the literature related to mobile phone (mhealth) applications for patient education specific to cancer and identify current recommendations from randomized studies. In particular, we were interested in identifying mobile phone applications along the cancer continuum, from cancer prevention to survivorship. The authors identified 28 articles reporting on mobile applications for patients related to cancer. Articles were identified in all categories along the cancer continuum, including health professional involvement in application development. Of these, six involved direct patient education, and eight focused on improving patient/professional communication and patient self-management. However, only six of the studies were randomized interventions. The potential for mobile applications to help overcome the "health care gap" has not yet been realized in the studies from the USA that were reviewed for this paper. However, early recommendations are emerging that support the use of mHealth communications to change behaviors for cancer prevention, early detection, and symptom management and improved patient-provider communication. Recommendations include short messages, use of multiple modalities as patient characteristics dictate comfort with mHealth communication, and the inclusion of patients and health professionals to develop and test applications. Tailoring mHealth to particular cultures, languages, and ethnic groups may also represent a unique possibility to provide accessible information and education at minimal cost for under-resourced communities and individuals.
Multiphysics Simulations: Challenges and Opportunities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keyes, David; McInnes, Lois C.; Woodward, Carol
2013-02-12
We consider multiphysics applications from algorithmic and architectural perspectives, where ‘‘algorithmic’’ includes both mathematical analysis and computational complexity, and ‘‘architectural’’ includes both software and hardware environments. Many diverse multiphysics applications can be reduced, en route to their computational simulation, to a common algebraic coupling paradigm. Mathematical analysis of multiphysics coupling in this form is not always practical for realistic applications, but model problems representative of applications discussed herein can provide insight. A variety of software frameworks for multiphysics applications have been constructed and refined within disciplinary communities and executed on leading-edge computer systems. We examine several of these, expose somemore » commonalities among them, and attempt to extrapolate best practices to future systems. From our study, we summarize challenges and forecast opportunities.« less
Code of Federal Regulations, 2010 CFR
2010-04-01
...) Modernization assistance provided pursuant to section 14 of the 1937 Act; (2) Housing and community development... including other housing assistance not administered by the Assistant Secretary of Housing) and community development assistance that is used for the following projects; (i) Housing rehabilitation (including...
Code of Federal Regulations, 2011 CFR
2011-04-01
...) Modernization assistance provided pursuant to section 14 of the 1937 Act; (2) Housing and community development... including other housing assistance not administered by the Assistant Secretary of Housing) and community development assistance that is used for the following projects; (i) Housing rehabilitation (including...
76 FR 71920 - Payment for Home Health Services and Hospice Care by Non-VA Providers
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-21
... concerning the billing methodology for non-VA providers of home health services and hospice care. The proposed rulemaking would include home health services and hospice care under the VA regulation governing payment for other non-VA health care providers. Because the newly applicable methodology cannot supersede...
COEUS: “semantic web in a box” for biomedical applications
2012-01-01
Background As the “omics” revolution unfolds, the growth in data quantity and diversity is bringing about the need for pioneering bioinformatics software, capable of significantly improving the research workflow. To cope with these computer science demands, biomedical software engineers are adopting emerging semantic web technologies that better suit the life sciences domain. The latter’s complex relationships are easily mapped into semantic web graphs, enabling a superior understanding of collected knowledge. Despite increased awareness of semantic web technologies in bioinformatics, their use is still limited. Results COEUS is a new semantic web framework, aiming at a streamlined application development cycle and following a “semantic web in a box” approach. The framework provides a single package including advanced data integration and triplification tools, base ontologies, a web-oriented engine and a flexible exploration API. Resources can be integrated from heterogeneous sources, including CSV and XML files or SQL and SPARQL query results, and mapped directly to one or more ontologies. Advanced interoperability features include REST services, a SPARQL endpoint and LinkedData publication. These enable the creation of multiple applications for web, desktop or mobile environments, and empower a new knowledge federation layer. Conclusions The platform, targeted at biomedical application developers, provides a complete skeleton ready for rapid application deployment, enhancing the creation of new semantic information systems. COEUS is available as open source at http://bioinformatics.ua.pt/coeus/. PMID:23244467
COEUS: "semantic web in a box" for biomedical applications.
Lopes, Pedro; Oliveira, José Luís
2012-12-17
As the "omics" revolution unfolds, the growth in data quantity and diversity is bringing about the need for pioneering bioinformatics software, capable of significantly improving the research workflow. To cope with these computer science demands, biomedical software engineers are adopting emerging semantic web technologies that better suit the life sciences domain. The latter's complex relationships are easily mapped into semantic web graphs, enabling a superior understanding of collected knowledge. Despite increased awareness of semantic web technologies in bioinformatics, their use is still limited. COEUS is a new semantic web framework, aiming at a streamlined application development cycle and following a "semantic web in a box" approach. The framework provides a single package including advanced data integration and triplification tools, base ontologies, a web-oriented engine and a flexible exploration API. Resources can be integrated from heterogeneous sources, including CSV and XML files or SQL and SPARQL query results, and mapped directly to one or more ontologies. Advanced interoperability features include REST services, a SPARQL endpoint and LinkedData publication. These enable the creation of multiple applications for web, desktop or mobile environments, and empower a new knowledge federation layer. The platform, targeted at biomedical application developers, provides a complete skeleton ready for rapid application deployment, enhancing the creation of new semantic information systems. COEUS is available as open source at http://bioinformatics.ua.pt/coeus/.
Integrating segmentation methods from the Insight Toolkit into a visualization application.
Martin, Ken; Ibáñez, Luis; Avila, Lisa; Barré, Sébastien; Kaspersen, Jon H
2005-12-01
The Insight Toolkit (ITK) initiative from the National Library of Medicine has provided a suite of state-of-the-art segmentation and registration algorithms ideally suited to volume visualization and analysis. A volume visualization application that effectively utilizes these algorithms provides many benefits: it allows access to ITK functionality for non-programmers, it creates a vehicle for sharing and comparing segmentation techniques, and it serves as a visual debugger for algorithm developers. This paper describes the integration of image processing functionalities provided by the ITK into VolView, a visualization application for high performance volume rendering. A free version of this visualization application is publicly available and is available in the online version of this paper. The process for developing ITK plugins for VolView according to the publicly available API is described in detail, and an application of ITK VolView plugins to the segmentation of Abdominal Aortic Aneurysms (AAAs) is presented. The source code of the ITK plugins is also publicly available and it is included in the online version.
Application procedures for hydropower licenses, exemptions, and preliminary permits
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1982-04-01
This document provides essential information regarding the FERC's regulations and procedures for filing an application with the Commission for hydropower licenses, exemptions and preliminary permits. Each section is page numbered with a roman numeral followed by consecutive arabic numbering. The appendices are page numbered with an alphabetical prefix and consecutve page numbering within each section. The first section of this book contains background descriptions of the Commission's authority and regulations and serves as an introduction to the Commission's hydropower licensing program. Two general tables follow this introductory text and provide a quick reference to the types of applications and themore » relationship between the Commission's orders and regulations. Following the introduction are sections which include the Commission's regulations by application type: preliminary permits; licenses; and exemptions. Each section contains an introduction describing application procedures by type of action requested. There are two appendices provided contain information on the consultation process and lists of agencies to be consulted and a section by section analyses of the Commission's orders.« less
A programmable and portable NMES device for drop foot correction and blood flow assist applications.
Breen, Paul P; Corley, Gavin J; O'Keeffe, Derek T; Conway, Richard; Olaighin, Gearóid
2009-04-01
The Duo-STIM, a new, programmable and portable neuromuscular stimulation system for drop foot correction and blood flow assist applications is presented. The system consists of a programmer unit and a portable, programmable stimulator unit. The portable stimulator features fully programmable, sensor-controlled, constant-voltage, dual-channel stimulation and accommodates a range of customized stimulation profiles. Trapezoidal and free-form adaptive stimulation intensity envelope algorithms are provided for drop foot correction applications, while time dependent and activity dependent algorithms are provided for blood flow assist applications. A variety of sensor types can be used with the portable unit, including force sensitive resistor-based foot switches and MEMS-based accelerometer and gyroscope devices. The paper provides a detailed description of the hardware and block-level system design for both units. The programming and operating procedures for the system are also presented. Finally, functional bench test results for the system are presented.
A programmable and portable NMES device for drop foot correction and blood flow assist applications.
Breen, Paul P; Corley, Gavin J; O'Keeffe, Derek T; Conway, Richard; OLaighin, Gearoid
2007-01-01
The Duo-STIM, a new, programmable and portable neuromuscular stimulation system for drop foot correction and blood flow assist applications is presented. The system consists of a programmer unit and a portable, programmable stimulator unit. The portable stimulator features fully programmable, sensor-controlled, constant-voltage, dual-channel stimulation and accommodates a range of customized stimulation profiles. Trapezoidal and free-form adaptive stimulation intensity envelope algorithms are provided for drop foot correction applications, while time dependent and activity dependent algorithms are provided for blood flow assist applications. A variety of sensor types can be used with the portable unit, including force sensitive resistor based foot switches and NMES based accelerometer and gyroscope devices. The paper provides a detailed description of the hardware and block-level system design for both units. The programming and operating procedures for the system are also presented. Finally, functional bench test results for the system are presented.
Oximetry using multispectral imaging: theory and application
NASA Astrophysics Data System (ADS)
MacKenzie, Lewis E.; Harvey, Andrew R.
2018-06-01
Multispectral imaging (MSI) is a technique for measurement of blood oxygen saturation in vivo that can be applied using various imaging modalities to provide new insights into physiology and disease development. This tutorial aims to provide a thorough introduction to the theory and application of MSI oximetry for researchers new to the field, whilst also providing detailed information for more experienced researchers. The optical theory underlying two-wavelength oximetry, three-wavelength oximetry, pulse oximetry, and multispectral oximetry algorithms are described in detail. The varied challenges of applying MSI oximetry to in vivo applications are outlined and discussed, covering: the optical properties of blood and tissue, optical paths in blood vessels, tissue auto-fluorescence, oxygen diffusion, and common oximetry artefacts. Essential image processing techniques for MSI are discussed, in particular, image acquisition, image registration strategies, and blood vessel line profile fitting. Calibration and validation strategies for MSI are discussed, including comparison techniques, physiological interventions, and phantoms. The optical principles and unique imaging capabilities of various cutting-edge MSI oximetry techniques are discussed, including photoacoustic imaging, spectroscopic optical coherence tomography, and snapshot MSI.
Saberi, Parya; Siedle-Khan, Robert; Sheon, Nicolas; Lightfoot, Marguerita
2016-06-01
The objective of this study was to conduct focus groups with youth (18-29 years old) living with HIV (YLWH) to better understand preferences for mobile applications in general and to inform the design of a mobile health application aimed at improving retention and engagement in healthcare and adherence to antiretroviral therapy. We conducted four focus groups with YLWH to elicit the names and characteristics of applications that they commonly used, reasons they deleted applications, and the features of an ideal mobile health application. A diverse sample of youth (N = 17) with a mean age of 25 years, 88.2% male, and 29.4% African American participated in four focus groups. Positive attributes of applications included informative, simple, allowing for networking, timely updates, little overlap with other applications, unlimited access to entertainment, and with ongoing advancement. Participants identified several reasons for deleting applications, including engaging in excessive behaviors (e.g., spending money), for hook ups only, too many notifications or restrictions, occupied too much space on device, or required wireless connectivity or frequent updates. Participants suggested that a mobile health application that they would find useful should have the ability to connect to a community of other YLWH, readily access healthcare providers, track personal data and information (such as laboratory data), and obtain health news and education. Privacy was a key factor in a mobile health application for all participants. Researchers can use the information provided by focus group participants in creating mobile health applications for YLWH.
Siedle-Khan, Robert; Sheon, Nicolas; Lightfoot, Marguerita
2016-01-01
Abstract The objective of this study was to conduct focus groups with youth (18–29 years old) living with HIV (YLWH) to better understand preferences for mobile applications in general and to inform the design of a mobile health application aimed at improving retention and engagement in healthcare and adherence to antiretroviral therapy. We conducted four focus groups with YLWH to elicit the names and characteristics of applications that they commonly used, reasons they deleted applications, and the features of an ideal mobile health application. A diverse sample of youth (N = 17) with a mean age of 25 years, 88.2% male, and 29.4% African American participated in four focus groups. Positive attributes of applications included informative, simple, allowing for networking, timely updates, little overlap with other applications, unlimited access to entertainment, and with ongoing advancement. Participants identified several reasons for deleting applications, including engaging in excessive behaviors (e.g., spending money), for hook ups only, too many notifications or restrictions, occupied too much space on device, or required wireless connectivity or frequent updates. Participants suggested that a mobile health application that they would find useful should have the ability to connect to a community of other YLWH, readily access healthcare providers, track personal data and information (such as laboratory data), and obtain health news and education. Privacy was a key factor in a mobile health application for all participants. Researchers can use the information provided by focus group participants in creating mobile health applications for YLWH. PMID:27214751
NASA Astrophysics Data System (ADS)
Watford, M.; DeCusatis, C.
2005-09-01
With the advent of new regulations governing the protection and recovery of sensitive business data, including the Sarbanes-Oxley Act, there has been a renewed interest in business continuity and disaster recovery applications for metropolitan area networks. Specifically, there has been a need for more efficient bandwidth utilization and lower cost per channel to facilitate mirroring of multi-terabit data bases. These applications have further blurred the boundary between metropolitan and wide area networks, with synchronous disaster recovery applications running up to 100 km and asynchronous solutions extending to 300 km or more. In this paper, we discuss recent enhancements in the Nortel Optical Metro 5200 Dense Wavelength Division Multiplexing (DWDM) platform, including features recently qualified for data communication applications such as Metro Mirror, Global Mirror, and Geographically Distributed Parallel Sysplex (GDPS). Using a 10 Gigabit/second (Gbit/s) backbone, this solution transports significantly more Fibre Channel protocol traffic with up to five times greater hardware density in the same physical package. This is also among the first platforms to utilize forward error correction (FEC) on the aggregate signals to improve bit error rate (BER) performance beyond industry standards. When combined with encapsulation into wide area network protocols, the use of FEC can compensate for impairments in BER across a service provider infrastructure without impacting application level performance. Design and implementation of these features will be discussed, including results from experimental test beds which validate these solutions for a number of applications. Future extensions of this environment will also be considered, including ways to provide configurable bandwidth on demand, mitigate Fibre Channel buffer credit management issues, and support for other GDPS protocols.
NASA Technical Reports Server (NTRS)
Mital, Subodh K.; Gyekenyesi, John Z.; Arnold, Steven M.; Sullivan, Roy M.; Manderscheid, Jane M.; Murthy, Pappu L. N.
2006-01-01
Due to its high specific energy content, liquid hydrogen (LH2) is emerging as an alternative fuel for future aircraft. As a result, there is a need for hydrogen tank storage systems, for these aircraft applications, that are expected to provide sufficient capacity for flight durations ranging from a few minutes to several days. It is understood that the development of a large, lightweight, reusable cryogenic liquid storage tank is crucial to meet the goals of and supply power to hydrogen-fueled aircraft, especially for long flight durations. This report provides an annotated review (including the results of an extensive literature review) of the current state of the art of cryogenic tank materials, structural designs, and insulation systems along with the identification of key challenges with the intent of developing a lightweight and long-term storage system for LH2. The broad classes of insulation systems reviewed include foams (including advanced aerogels) and multilayer insulation (MLI) systems with vacuum. The MLI systems show promise for long-term applications. Structural configurations evaluated include single- and double-wall constructions, including sandwich construction. Potential wall material candidates are monolithic metals as well as polymer matrix composites and discontinuously reinforced metal matrix composites. For short-duration flight applications, simple tank designs may suffice. Alternatively, for longer duration flight applications, a double-wall construction with a vacuum-based insulation system appears to be the most optimum design. The current trends in liner material development are reviewed in the case that a liner is required to minimize or eliminate the loss of hydrogen fuel through permeation.
Physical Processes and Applications of the Monte Carlo Radiative Energy Deposition (MRED) Code
NASA Astrophysics Data System (ADS)
Reed, Robert A.; Weller, Robert A.; Mendenhall, Marcus H.; Fleetwood, Daniel M.; Warren, Kevin M.; Sierawski, Brian D.; King, Michael P.; Schrimpf, Ronald D.; Auden, Elizabeth C.
2015-08-01
MRED is a Python-language scriptable computer application that simulates radiation transport. It is the computational engine for the on-line tool CRÈME-MC. MRED is based on c++ code from Geant4 with additional Fortran components to simulate electron transport and nuclear reactions with high precision. We provide a detailed description of the structure of MRED and the implementation of the simulation of physical processes used to simulate radiation effects in electronic devices and circuits. Extensive discussion and references are provided that illustrate the validation of models used to implement specific simulations of relevant physical processes. Several applications of MRED are summarized that demonstrate its ability to predict and describe basic physical phenomena associated with irradiation of electronic circuits and devices. These include effects from single particle radiation (including both direct ionization and indirect ionization effects), dose enhancement effects, and displacement damage effects. MRED simulations have also helped to identify new single event upset mechanisms not previously observed by experiment, but since confirmed, including upsets due to muons and energetic electrons.
NASA Astrophysics Data System (ADS)
Friberg, P. A.; Luis, R. S.; Quintiliani, M.; Lisowski, S.; Hunter, S.
2014-12-01
Recently, a novel set of modules has been included in the Open Source Earthworm seismic data processing system, supporting the use of web applications. These include the Mole sub-system, for storing relevant event data in a MySQL database (see M. Quintiliani and S. Pintore, SRL, 2013), and an embedded webserver, Moleserv, for serving such data to web clients in QuakeML format. These modules have enabled, for the first time using Earthworm, the use of web applications for seismic data processing. These can greatly simplify the operation and maintenance of seismic data processing centers by having one or more servers providing the relevant data as well as the data processing applications themselves to client machines running arbitrary operating systems.Web applications with secure online web access allow operators to work anywhere, without the often cumbersome and bandwidth hungry use of secure shell or virtual private networks. Furthermore, web applications can seamlessly access third party data repositories to acquire additional information, such as maps. Finally, the usage of HTML email brought the possibility of specialized web applications, to be used in email clients. This is the case of EWHTMLEmail, which produces event notification emails that are in fact simple web applications for plotting relevant seismic data.Providing web services as part of Earthworm has enabled a number of other tools as well. One is ISTI's EZ Earthworm, a web based command and control system for an otherwise command line driven system; another is a waveform web service. The waveform web service serves Earthworm data to additional web clients for plotting, picking, and other web-based processing tools. The current Earthworm waveform web service hosts an advanced plotting capability for providing views of event-based waveforms from a Mole database served by Moleserve.The current trend towards the usage of cloud services supported by web applications is driving improvements in JavaScript, css and HTML, as well as faster and more efficient web browsers, including mobile. It is foreseeable that in the near future, web applications are as powerful and efficient as native applications. Hence the work described here has been the first step towards bringing the Open Source Earthworm seismic data processing system to this new paradigm.
Use of the self-retaining Alexis ring retractor in transoral robotic surgery.
Perenyei, Miklos; Dobbs, Thomas D; Fraser, Lisa R; Winter, Stuart C
2017-10-01
Ring retractors, such as the Alexis® wound retractor, are simple devices used in a wide range of surgical settings to provide atraumatic exposure while protecting wound edges. Here, we describe the application of the Alexis® to provide access during transoral robotic surgery (TORS). Its ease of application and many benefits, including maximization of intraoral space and protection of perioral soft tissues, make this device an excellent adjunct for TORS procedures. © 2017 Wiley Periodicals, Inc.
NASA Technical Reports Server (NTRS)
Reese, T. G.; Baracat, W. A.; Butner, C. L.
1986-01-01
The handbook provides a list and description of ongoing tether programs. This includes the joint U.S.-Italy demonstration project, and individual U.S. and Italian studies and demonstration programs. An overview of the current activity level and areas of emphasis in this emerging field is provided. The fundamental physical principles behind the proposed tether applications are addressed. Four basic concepts of gravity gradient, rotation, momentum exchange, and electrodynamics are discussed. Information extracted from literature, which supplements and enhances the tether applications is also presented. A bibliography is appended.
High performance hybrid magnetic structure for biotechnology applications
Humphries, David E [El Cerrito, CA; Pollard, Martin J [El Cerrito, CA; Elkin, Christopher J [San Ramon, CA
2009-02-03
The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are further improvements to aspects of the hybrid magnetic structure, including additional elements and for adapting the use of the hybrid magnetic structure for use in biotechnology and high throughput processes.
Prensky, Stephen E.
1987-01-01
This report includes over 1,350 individual citations as well as a first-author index. The purpose of this bibliography is twofold, 1) to provide a basic, first-stop resource on well logging which the non-specialist, i. e. , geoscientist, can consult and, 2) to provide a reference on geologic applications for the non-geoscientist, i. e. , log analyst or petroleum engineer, as well as for the geoscientist.
1994-07-01
provide additional information for the user / policy analyst: Eichers, D., Sola, M., McLernan, G., EPICC User’s Manual , Systems Research and Applications...maintenance, and a set of on-line help screens. Each are further discussed below and a full discussion is included in the EPICC User’s Manual . Menu Based...written documentation (user’s manual ) that will be provided with the model. 55 The next chapter discusses the validation of the inventory projection and
Wavelet transform: fundamentals, applications, and implementation using acousto-optic correlators
NASA Astrophysics Data System (ADS)
DeCusatis, Casimer M.; Koay, J.; Litynski, Daniel M.; Das, Pankaj K.
1995-10-01
In recent years there has been a great deal of interest in the use of wavelets to supplement or replace conventional Fourier transform signal processing. This paper provides a review of wavelet transforms for signal processing applications, and discusses several emerging applications which benefit from the advantages of wavelets. The wavelet transform can be implemented as an acousto-optic correlator; perfect reconstruction of digital signals may also be achieved using acousto-optic finite impulse response filter banks. Acousto-optic image correlators are discussed as a potential implementation of the wavelet transform, since a 1D wavelet filter bank may be encoded as a 2D image. We discuss applications of the wavelet transform including nondestructive testing of materials, biomedical applications in the analysis of EEG signals, and interference excision in spread spectrum communication systems. Computer simulations and experimental results for these applications are also provided.
Development of a cloud-based application for the Fracture Liaison Service model of care.
Holzmueller, C G; Karp, S; Zeldow, D; Lee, D B; Thompson, D A
2016-02-01
The aims of this study are to develop a cloud-based application of the Fracture Liaison Service for practitioners to coordinate the care of osteoporotic patients after suffering primary fractures and provide a performance feedback portal for practitioners to determine quality of care. The application provides continuity of care, improved patient outcomes, and reduced medical costs. The purpose of this study is to describe the content development and functionality of a cloud-based application to broadly deploy the Fracture Liaison Service (FLS) to coordinate post-fracture care for osteoporotic patients. The Bone Health Collaborative developed the FLS application in 2013 to support practitioners' access to information and management of patients and provide a feedback portal for practitioners to track their performance in providing quality care. A five-step protocol (identify, inform, initiate, investigate, and iterate) organized osteoporotic post-fracture care-related tasks and timelines for the application. A range of descriptive data about the patient, their medical condition, therapies and care, and current providers can be collected. Seven quality of care measures from the National Quality Forum, The Joint Commission, and the Centers for Medicare and Medicaid Services can be tracked through the application. There are five functional areas including home, tasks, measures, improvement, and data. The home, tasks, and data pages are used to enter patient information and coordinate care using the five-step protocol. Measures and improvement pages are used to enter quality measures and provide practitioners with continuous performance feedback. The application resides within a portal, running on a multitenant, private cloud-based Avedis enterprise registry platform. All data are encrypted in transit and users access the application using a password from any common web browser. The application could spread the FLS model of care across the US health care system, provide continuity of care, effectively manage osteoporotic patients, improve outcomes, and reduce medical costs.
Uncooled microbolometer sensors for unattended applications
NASA Astrophysics Data System (ADS)
Kohin, Margaret; Miller, James E.; Leary, Arthur R.; Backer, Brian S.; Swift, William; Aston, Peter
2003-09-01
BAE SYSTEMS has been developing and producing uncooled microbolometer sensors since 1995. Recently, uncooled sensors have been used on Pointer Unattended Aerial Vehicles and considered for several unattended sensor applications including DARPA Micro-Internetted Unattended Ground Sensors (MIUGS), Army Modular Acoustic Imaging Sensors (MAIS), and Redeployable Unattended Ground Sensors (R-UGS). This paper describes recent breakthrough uncooled sensor performance at BAE SYSTEMS and how this improved performance has been applied to a new Standard Camera Core (SCC) that is ideal for these unattended applications. Video imagery from a BAE SYSTEMS 640x480 imaging camera flown in a Pointer UAV is provided. Recent performance results are also provided.
Terrestrial Applications of Extreme Environment Stirling Space Power Systems
NASA Technical Reports Server (NTRS)
Dyson, Rodger. W.
2012-01-01
NASA has been developing power systems capable of long-term operation in extreme environments such as the surface of Venus. This technology can use any external heat source to efficiently provide electrical power and cooling; and it is designed to be extremely efficient and reliable for extended space missions. Terrestrial applications include: use in electric hybrid vehicles; distributed home co-generation/cooling; and quiet recreational vehicle power generation. This technology can reduce environmental emissions, petroleum consumption, and noise while eliminating maintenance and environmental damage from automotive fluids such as oil lubricants and air conditioning coolant. This report will provide an overview of this new technology and its applications.
EPA Technical Support Centers (TSC): FY14 Lessons ...
EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct applications (i.e., site-specific technical support) and general applications (i.e., technical transfer activities such as technical guidance documents, conferences, or workshops) . The TSCs are charged with providing solutions by: 1) linking EPA research to Agency decision-makers; 2) applying best practices to real world field applications; and 3) channeling feedback from field application to research communities. The TSP goal is to provide Regional Remedial Project Managers (RPMs), Corrective Action Staff, and On-Scene Coordinators (OSCs) with a diverse set of readily-accessible resources for technical assistance. This research summary provides six case studies – two from each of the three TSCs (Ground Water Technical Support Center, Engineering Technical Support Center, and Site Characterization Technical Support Center) – to exemplify and summarize the variety of TSC approaches that contribute to fulfilling the TSP mission. EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this informati
Self-healing composites and applications thereof
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tee, Chee Keong; Wang, Chao; Cui, Yi
A battery electrode includes an electrochemically active material and a binder covering the electrochemically active material. The binder includes a self-healing polymer and conductive additives dispersed in the self-healing polymer to provide an electrical pathway across at least a portion of the binder.
Three Trailblazing Technologies for Schools.
ERIC Educational Resources Information Center
McGinty, Tony
1987-01-01
Provides an overview of the capabilities and potential educational applications of CD-ROM (compact disk read-only memory), artificial intelligence, and speech technology. Highlights include reference materials on CD-ROM; current developments in CD-I (compact disk interactive); synthesized and digital speech for microcomputers, including specific…
NASA Astrophysics Data System (ADS)
Sepulveda Carlo, E.; Escobar, V. M.; Delgado Arias, S.; Forgotson, C.
2017-12-01
The NASA Carbon Monitoring System initiated by U.S. Congress in 2010 is developing products that characterize and quantify carbon sources and sinks in the United States and the global tropics. In 2013, an applications effort was selected to engage potential end users and gather feedback about their data needs. For the past four years the CMS applications efforts has expanded and implemented a number of strategies to connect carbon scientists to decision-makers, contributing to the societal benefits of CMS data products. The applications efforts use crowd sourcing to collects feedback from stakeholders on challenges and lessons learned in the use of CMS data products. Some of the most common data needs from engaged organizations include above and below-ground biomass and fluxes in forestlands and wetlands, and greenhouse gas (GHG) emissions across all land use/cover and land use changes. Stakeholder organizations' needs for CMS data products support national GHG inventories following the Paris Agreement, carbon markets, and sub-national natural resources management and policies. The lessons learned report presents stakeholder specific applications, challenges, and successes from using CMS data products. To date, the most common uses of CMS products include: conservation efforts, emissions inventory, forestry and land cover applications, and carbon offset projects. The most common challenges include: the need for familiar and consistent products over time, budget constraints, and concern with uncertainty of modeled results. Recurrent recommendations from stakeholder indicate that CMS should provide high resolution (30m) and frequent data products updates (annually). The applications efforts have also helped identified success stories from different CMS projects, including the development of the GHG emissions inventory from Providence, RI, the improvement of the U.S. GHG Inventory though the use of satellite data, and the use of high resolution canopy cover maps for forestry, conservation, and ecosystem services applications in the tristate area of Maryland, Delaware and Pennsylvania. The presentation will discuss the applications framework methodology and strategy, as well as highlight some of the results and lessons learned from these applications efforts.
Leveraging OpenStudio's Application Programming Interfaces: Preprint
DOE Office of Scientific and Technical Information (OSTI.GOV)
Long, N.; Ball, B.; Goldwasser, D.
2013-11-01
OpenStudio development efforts have been focused on providing Application Programming Interfaces (APIs) where users are able to extend OpenStudio without the need to compile the open source libraries. This paper will discuss the basic purposes and functionalities of the core libraries that have been wrapped with APIs including the Building Model, Results Processing, Advanced Analysis, UncertaintyQuantification, and Data Interoperability through Translators. Several building energy modeling applications have been produced using OpenStudio's API and Software Development Kits (SDK) including the United States Department of Energy's Asset ScoreCalculator, a mobile-based audit tool, an energy design assistance reporting protocol, and a portfolio scalemore » incentive optimization analysismethodology. Each of these software applications will be discussed briefly and will describe how the APIs were leveraged for various uses including high-level modeling, data transformations from detailed building audits, error checking/quality assurance of models, and use of high-performance computing for mass simulations.« less
Emerging technology: applications of Raman spectroscopy for prostate cancer.
Kast, Rachel E; Tucker, Stephanie C; Killian, Kevin; Trexler, Micaela; Honn, Kenneth V; Auner, Gregory W
2014-09-01
There is a need in prostate cancer diagnostics and research for a label-free imaging methodology that is nondestructive, rapid, objective, and uninfluenced by water. Raman spectroscopy provides a molecular signature, which can be scaled from micron-level regions of interest in cells to macroscopic areas of tissue. It can be used for applications ranging from in vivo or in vitro diagnostics to basic science laboratory testing. This work describes the fundamentals of Raman spectroscopy and complementary techniques including surface enhanced Raman scattering, resonance Raman spectroscopy, coherent anti-Stokes Raman spectroscopy, confocal Raman spectroscopy, stimulated Raman scattering, and spatially offset Raman spectroscopy. Clinical applications of Raman spectroscopy to prostate cancer will be discussed, including screening, biopsy, margin assessment, and monitoring of treatment efficacy. Laboratory applications including cell identification, culture monitoring, therapeutics development, and live imaging of cellular processes are discussed. Potential future avenues of research are described, with emphasis on multiplexing Raman spectroscopy with other modalities.
Therapeutic Applications of Extracellular Vesicles: Clinical Promise and Open Questions
Breakefield, Xandra O.; Leonard, Joshua N.
2015-01-01
This review provides an updated perspective on rapidly proliferating efforts to harness extracellular vesicles (EVs) for therapeutic applications. We summarize current knowledge, emerging strategies, and open questions pertaining to clinical potential and translation. Potentially useful EVs comprise diverse products of various cell types and species. EV components may also be combined with liposomes and nanoparticles to facilitate manufacturing as well as product safety and evaluation. Potential therapeutic cargoes include RNA, proteins, and drugs. Strategic issues considered herein include choice of therapeutic agent, means of loading cargoes into EVs, promotion of EV stability, tissue targeting, and functional delivery of cargo to recipient cells. Some applications may harness natural EV properties, such as immune modulation, regeneration promotion, and pathogen suppression. These properties can be enhanced or customized to enable a wide range of therapeutic applications, including vaccination, improvement of pregnancy outcome, and treatment of autoimmune disease, cancer, and tissue injury. PMID:25292428
Advanced Ceramic Materials for Future Aerospace Applications
NASA Technical Reports Server (NTRS)
Misra, Ajay
2015-01-01
With growing trend toward higher temperature capabilities, lightweight, and multifunctionality, significant advances in ceramic matrix composites (CMCs) will be required for future aerospace applications. The presentation will provide an overview of material requirements for future aerospace missions, and the role of ceramics and CMCs in meeting those requirements. Aerospace applications will include gas turbine engines, aircraft structure, hypersonic and access to space vehicles, space power and propulsion, and space communication.
NASA Technical Reports Server (NTRS)
1975-01-01
Information used in identifying representative Manned Maneuvering Unit (MMU) from the many Automated and Sortie Payloads and orbiter subsystems is presented. Representative missions were selected to represent typical MMU applications across all payloads and orbiter subsystems. Data analysis sheets are provided with other applicable information. Calculations used in defining MMU general performance and control requirements to satisfy eleven space missions are included.
ERIC Educational Resources Information Center
Schulze, Terry L., Ed.; Kriner, Ray R., Ed.
This training manual provides information needed to meet the mimimum EPA standards for certification as a commercial applicator of pesticides in the mosquito control category. The text discusses the aspects of mosquito biology and control by biological, mechanical, and integrated measures. A study guide with sample and study questions is included.…
Stochastic differential equations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sobczyk, K.
1990-01-01
This book provides a unified treatment of both regular (or random) and Ito stochastic differential equations. It focuses on solution methods, including some developed only recently. Applications are discussed, in particular an insight is given into both the mathematical structure, and the most efficient solution methods (analytical as well as numerical). Starting from basic notions and results of the theory of stochastic processes and stochastic calculus (including Ito's stochastic integral), many principal mathematical problems and results related to stochastic differential equations are expounded here for the first time. Applications treated include those relating to road vehicles, earthquake excitations and offshoremore » structures.« less
Nanomechanics of carbon nanotubes
NASA Astrophysics Data System (ADS)
Ramasamy, Mouli; Kumar, Prashanth S.; Varadan, Vijay K.
2017-04-01
This review focusses on introducing the mechanics in carbon nanotubes (CNT), and the major applications of CNT and its composites in biomedicine. It emphasizes the nanomechanics of these materials by reviewing the widely followed experimental methods, theoretical models, simulations, classification, segregation and applications the aforementioned materials. First, several mechanical properties contributing to the classification of the CNT, for various biomedicine applications, are discussed in detail to provide a cursory glance at the uses of CNT. The mechanics of CNT discussed in this paper include: elasticity, stress, tension, compression, nano-scale mechanics. In addition to these basic properties, a brief introduction about nanoscale composites is given. Second, a brief review on some of the major applications of CNT in biomedicine including drug delivery, therapeutics, diagnostics and regenerative medicine is given.
NASA Technical Reports Server (NTRS)
1975-01-01
An overview is given of the utility, feasibility, and advantages of active microwave sensors for a broad range of applications, including aerospace. In many instances, the material provides an in-depth examination of the applicability and/or the technology of microwave remote sensing, and considerable documentation is presented in support of these techniques. An assessment of the relative strengths and weaknesses of active microwave sensor data indicates that satisfactory data are obtainable for several significant applications.
Information to Include in Curriculum Vitae | Cancer Prevention Fellowship Program
Applicants are encouraged to use their current curriculum vitae and to add any necessary information. Please include your name and a page number on each page. Some of the information requested below will not be applicable to all individuals. Personal Information Name (first middle last) Date of birth Place of birth (city, state, country) Home address Work/school address Phone number (if more than one number is provided, please indicate preferred contact) Fax num
Goldberger, Ary L.
2006-01-01
Physiologic systems in health and disease display an extraordinary range of temporal behaviors and structural patterns that defy understanding based on linear constructs, reductionist strategies, and classical homeostasis. Application of concepts and computational tools derived from the contemporary study of complex systems, including nonlinear dynamics, fractals and “chaos theory,” is having an increasing impact on biology and medicine. This presentation provides a brief overview of an emerging area of biomedical research, including recent applications to cardiopulmonary medicine and chronic obstructive lung disease. PMID:16921107
Mineral resource of the month: germanium
Guberman, David
2010-01-01
The article provides information on germanium, an element with electrical properties between those of a metal and an insulator. Applications of germanium include its use as a component of the glass in fiber-optic cable, in infrared optics devices and as a semiconductor and substrate used in electronic and solar applications. Germanium was first isolated by German chemist Clemens Winkler in 1886 and was named after Winkler's native country. In 2008, the leading sources of primary germanium from coal or zinc include Canada, China and Russia.
A first experience with a Smart bus for improving public transportation
NASA Astrophysics Data System (ADS)
Tostado, R.; Rovirosa, A.; Velázquez, J. L.; Castillo, E.; Cervantes, O.
2017-09-01
An alternative to optimize transportation services in the city of Puebla is presented. Main problems tackled to provide advanced transport applications in a Smart City, are described and some available solutions in other countries are analyzed. As a case of study, the challenges for designing and developing a mobile application oriented to users of the buses provided by Universidad de las Américas Puebla (UDLAP) are presented. Users include students, as well as faculty members and administrative employees. The application provides an innovative way of tracking, in real time, movements of the UDLAP transportation buses through the city of Puebla in Mexico. Modeling and technical implementation solved problems are presented and future steps for extending those services to the city of Puebla are also suggested.
Java Application Shell: A Framework for Piecing Together Java Applications
NASA Technical Reports Server (NTRS)
Miller, Philip; Powers, Edward I. (Technical Monitor)
2001-01-01
This session describes the architecture of Java Application Shell (JAS), a Swing-based framework for developing interactive Java applications. Java Application Shell is being developed by Commerce One, Inc. for NASA Goddard Space Flight Center Code 588. The purpose of JAS is to provide a framework for the development of Java applications, providing features that enable the development process to be more efficient, consistent and flexible. Fundamentally, JAS is based upon an architecture where an application is considered a collection of 'plugins'. In turn, a plug-in is a collection of Swing actions defined using XML and packaged in a jar file. Plug-ins may be local to the host platform or remotely-accessible through HTTP. Local and remote plugins are automatically discovered by JAS upon application startup; plugins may also be loaded dynamically without having to re-start the application. Using Extensible Markup Language (XML) to define actions, as opposed to hardcoding them in application logic, allows easier customization of application-specific operations by separating application logic from presentation. Through XML, a developer defines an action that may appear on any number of menus, toolbars, and buttons. Actions maintain and propagate enable/disable states and specify icons, tool-tips, titles, etc. Furthermore, JAS allows actions to be implemented using various scripting languages through the use of IBM's Bean Scripting Framework. Scripted action implementation is seamless to the end-user. In addition to action implementation, scripts may be used for application and unit-level testing. In the case of application-level testing, JAS has hooks to assist a script in simulating end-user input. JAS also provides property and user preference management, JavaHelp, Undo/Redo, Multi-Document Interface, Single-Document Interface, printing, and logging. Finally, Jini technology has also been included into the framework by means of a Jini services browser and the ability to associate services with actions. Several Java technologies have been incorporated into JAS, including Swing, Internal Frames, Java Beans, XML, JavaScript, JavaHelp, and Jini. Additional information is contained in the original extended abstract.
Corrugated pipe adhesive applicator apparatus
Shirey, R.A.
1983-06-14
Apparatus for coating selected portions of the troughs of a corrugated pipe with an adhesive includes a support disposed within the pipe with a reservoir containing the adhesive disposed on the support. A pump, including a spout, is utilized for supplying the adhesive from the reservoir to a trough of the pipe. A rotatable applicator is supported on the support and contacts the trough of the pipe. The applicator itself is sized so as to fit within the trough, and contacts the adhesive in the trough and spreads the adhesive in the trough upon rotation. A trough shield, supported by the support and disposed in the path of rotation of the applicator, is utilized to prevent the applicator from contacting selected portions of the trough. A locator head is also disposed on the support and provides a way for aligning the spout, the applicator, and the trough shield with the trough. 4 figs.
ERIC Educational Resources Information Center
Institute of Museum and Library Services, 2008
2008-01-01
This publication provides an overview of the Institute of Museum and Library Services (IMLS), including programs, initiatives, research projects, publications, and strategic partnerships. It also provides tips for developing competitive grant applications and staff contacts for each program for the fiscal year beginning October 1, 2008. Once grant…
Banta, Edward R.; Poeter, Eileen P.; Doherty, John E.; Hill, Mary C.
2006-01-01
he Joint Universal Parameter IdenTification and Evaluation of Reliability Application Programming Interface (JUPITER API) improves the computer programming resources available to those developing applications (computer programs) for model analysis.The JUPITER API consists of eleven Fortran-90 modules that provide for encapsulation of data and operations on that data. Each module contains one or more entities: data, data types, subroutines, functions, and generic interfaces. The modules do not constitute computer programs themselves; instead, they are used to construct computer programs. Such computer programs are called applications of the API. The API provides common modeling operations for use by a variety of computer applications.The models being analyzed are referred to here as process models, and may, for example, represent the physics, chemistry, and(or) biology of a field or laboratory system. Process models commonly are constructed using published models such as MODFLOW (Harbaugh et al., 2000; Harbaugh, 2005), MT3DMS (Zheng and Wang, 1996), HSPF (Bicknell et al., 1997), PRMS (Leavesley and Stannard, 1995), and many others. The process model may be accessed by a JUPITER API application as an external program, or it may be implemented as a subroutine within a JUPITER API application . In either case, execution of the model takes place in a framework designed by the application programmer. This framework can be designed to take advantage of any parallel processing capabilities possessed by the process model, as well as the parallel-processing capabilities of the JUPITER API.Model analyses for which the JUPITER API could be useful include, for example: Compare model results to observed values to determine how well the model reproduces system processes and characteristics.Use sensitivity analysis to determine the information provided by observations to parameters and predictions of interest.Determine the additional data needed to improve selected model predictions.Use calibration methods to modify parameter values and other aspects of the model.Compare predictions to regulatory limits.Quantify the uncertainty of predictions based on the results of one or many simulations using inferential or Monte Carlo methods.Determine how to manage the system to achieve stated objectives.The capabilities provided by the JUPITER API include, for example, communication with process models, parallel computations, compressed storage of matrices, and flexible input capabilities. The input capabilities use input blocks suitable for lists or arrays of data. The input blocks needed for one application can be included within one data file or distributed among many files. Data exchange between different JUPITER API applications or between applications and other programs is supported by data-exchange files.The JUPITER API has already been used to construct a number of applications. Three simple example applications are presented in this report. More complicated applications include the universal inverse code UCODE_2005 (Poeter et al., 2005), the multi-model analysis MMA (Eileen P. Poeter, Mary C. Hill, E.R. Banta, S.W. Mehl, and Steen Christensen, written commun., 2006), and a code named OPR_PPR (Matthew J. Tonkin, Claire R. Tiedeman, Mary C. Hill, and D. Matthew Ely, written communication, 2006).This report describes a set of underlying organizational concepts and complete specifics about the JUPITER API. While understanding the organizational concept presented is useful to understanding the modules, other organizational concepts can be used in applications constructed using the JUPITER API.
Submillimeter Spectroscopic Diagnostics in Semiconductor Processing Plasmas
NASA Astrophysics Data System (ADS)
Helal, Yaser H.; Neese, Christopher F.; De Lucia, Frank C.; Ewing, Paul R.; Stout, Phillip J.; Walker, Quentin; Armacost, Michael D.
2014-06-01
Submillimeter absorption spectroscopy was used to study semiconductor processing plasmas. Abundances and temperatures of molecules, radicals, and ions can be determined without altering any of the properties of the plasma. The behavior of these measurements provides useful applications in monitoring process steps. A summary of such applications will be presented, including etching and cleaning endpoint detection.
33 CFR 148.105 - What must I include in my application?
Code of Federal Regulations, 2010 CFR
2010-07-01
... engineering firm, if known, that will design the deepwater port or a portion of the port, the application must... only product the port is designed to transport, the throughput report may be limited to reporting crude... survey of the proposed marine site. This survey should provide data on the water depth, prevailing...
18 CFR 1302.2 - Application of this part.
Code of Federal Regulations, 2010 CFR
2010-04-01
... § 1302.2 Application of this part. This part applies to any program for which financial assistance is provided by TVA. The types of Federal financial assistance to which this part applies are listed in appendix A of this part. Financial assistance, as used in this part, includes the grant or loan of money...
38 CFR 61.12 - Capital grant application packages-threshold requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... contains the Employer Identification Number or Taxpayer Identification Number (EIN/TIN) that corresponds to... must provide such an IRS determination letter, which includes their EIN/TIN. Applicants that apply under a group EIN/TIN must be identified by the parent EIN/TIN as a member or sub-unit of the parent EIN...
38 CFR 61.12 - Capital grant application packages-threshold requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... contains the Employer Identification Number or Taxpayer Identification Number (EIN/TIN) that corresponds to... must provide such an IRS determination letter, which includes their EIN/TIN. Applicants that apply under a group EIN/TIN must be identified by the parent EIN/TIN as a member or sub-unit of the parent EIN...
beta-Aminoalcohols as Potential Reactivators of Aged Sarin-/Soman-Inhibited Acetylcholinesterase
2017-02-08
This approach includes high - quality quantum mechanical/molecular mechanical calcula- tions, providing reliable reactivation steps and energetics...I. V. Khavrutskii Department of Defense Biotechnology High Performance Computing Software Applications Institute Telemedicine and Advanced...b] Dr. A. Wallqvist Department of Defense Biotechnology High Performance Computing Software Applications Institute Telemedicine and Advanced
21 CFR 100.1 - Petitions requesting exemption from preemption for State or local requirements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... of the petition shall be submitted, or the petitioner may submit an original and a computer readable... of State Requirement Provide a copy of the State requirement that is the subject of the application. Where available, the application should also include copies of any legislative history or background...
21 CFR 100.1 - Petitions requesting exemption from preemption for State or local requirements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... of the petition shall be submitted, or the petitioner may submit an original and a computer readable... of State Requirement Provide a copy of the State requirement that is the subject of the application. Where available, the application should also include copies of any legislative history or background...
21 CFR 100.1 - Petitions requesting exemption from preemption for State or local requirements.
Code of Federal Regulations, 2014 CFR
2014-04-01
... of the petition shall be submitted, or the petitioner may submit an original and a computer readable... of State Requirement Provide a copy of the State requirement that is the subject of the application. Where available, the application should also include copies of any legislative history or background...
21 CFR 100.1 - Petitions requesting exemption from preemption for State or local requirements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... of the petition shall be submitted, or the petitioner may submit an original and a computer readable... of State Requirement Provide a copy of the State requirement that is the subject of the application. Where available, the application should also include copies of any legislative history or background...
76 FR 61670 - Receipt of an Application for Incidental Take Permit (16230)
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-05
... sensitive or protected information. NMFS will accept anonymous comments (enter ``N/A'' in the required... incidental to, and not the purpose of, otherwise lawful activities. Section 10(a)(1)(B) of the ESA provides... species are included in the conservation plan and Permit application: Loggerhead (Caretta caretta), green...
Technology survey of computer software as applicable to the MIUS project
NASA Technical Reports Server (NTRS)
Fulbright, B. E.
1975-01-01
Existing computer software, available from either governmental or private sources, applicable to modular integrated utility system program simulation is surveyed. Several programs and subprograms are described to provide a consolidated reference, and a bibliography is included. The report covers the two broad areas of design simulation and system simulation.
17 CFR 3.44 - Temporary licensing of applicants for guaranteed introducing broker registration.
Code of Federal Regulations, 2012 CFR
2012-04-01
... fingerprints of the applicant, if a sole proprietor, and of each principal (including each branch office manager) thereof on fingerprint cards provided by the National Futures Association for that purpose... Commission is not required to submit a fingerprint card. (b) The effective date of a guarantee agreement...
17 CFR 3.44 - Temporary licensing of applicants for guaranteed introducing broker registration.
Code of Federal Regulations, 2011 CFR
2011-04-01
... fingerprints of the applicant, if a sole proprietor, and of each principal (including each branch office manager) thereof on fingerprint cards provided by the National Futures Association for that purpose... Commission is not required to submit a fingerprint card. (b) The effective date of a guarantee agreement...
ERIC Educational Resources Information Center
Learn, Larry L., Ed.
1995-01-01
Discusses the evolution of real-time telephony and broadcast applications using the Internet; resulting issues and opportunities; and future implications for regulators, Internet users, and service providers. Topics covered include bandpass, packetized voice, IP structures, class D datagrams, software, technical parameters, legal and regulatory…
Primer for the Transportable Applications Executive
NASA Technical Reports Server (NTRS)
Carlson, P. A.; Emmanuelli, C. A.; Harris, E. L.; Perkins, D. C.
1984-01-01
The Transportable Applications Executive (TAE), an interactive multipurpose executive that provides commonly required functions for scientific analysis systems, is discussed. The concept of an executive is discussed and the various components of TAE are presented. These include on-line help information, the use of menus or commands to access analysis programs, and TAE command procedures.
Alternative medicine in the workplace.
Lippin, R A
1996-01-01
Workplace settings are ripe for the application of alternative medical interventions for a variety of reasons. Included among them are a shared interest in prevention by both the occupational and alternative medicine communities, economic incentives by corporations as major purchasers of healthcare to reduce healthcare costs and improve employee productivity, and the willingness of corporations to be differentially creative in their approach to delivering and purchasing healthcare. This paper describes the US workforce in transition, provides an overview of occupational medicine including current programs and emerging issues, describes the current applications of alternative medicine interventions in the workplace, and argues for future expanded application of alternative medicine in workplace settings.
Survey of methods for soil moisture determination
NASA Technical Reports Server (NTRS)
Schmugge, T. J.; Jackson, T. J.; Mckim, H. L.
1979-01-01
Existing and proposed methods for soil moisture determination are discussed. These include: (1) in situ investigations including gravimetric, nuclear, and electromagnetic techniques; (2) remote sensing approaches that use the reflected solar, thermal infrared, and microwave portions of the electromagnetic spectrum; and (3) soil physics models that track the behavior of water in the soil in response to meteorological inputs (precipitation) and demands (evapotranspiration). The capacities of these approaches to satisfy various user needs for soil moisture information vary from application to application, but a conceptual scheme for merging these approaches into integrated systems to provide soil moisture information is proposed that has the potential for meeting various application requirements.
NASA Technical Reports Server (NTRS)
Weil, J.
1981-01-01
Flight derived longitudinal and lateral-directional stability and control derivatives were compared to wind-tunnel derived values. As a result of these comparisons, boundaries representing the uncertainties that could be expected from wind-tunnel predictions were established. These boundaries provide a useful guide for control system sensitivity studies prior to flight. The primary application for this data was the space shuttle, and as a result the configurations included in the study were those most applicable to the space shuttle. The configurations included conventional delta wing aircraft as well as the X-15 and lifting body vehicles.
Exchange of Veterans Affairs medical data using national and local networks.
Dayhoff, R E; Maloney, D L
1992-12-17
Remote data exchange is extremely useful to a number of medical applications. It requires an infrastructure including systems, network and software tools. With such an infrastructure, existing local applications can be extended to serve national needs. There are many approaches to providing remote data exchange. Selection of an approach for an application requires balancing of various factors, including the need for rapid interactive access to data and ad hoc queries, the adequacy of access to predefined data sets, the need for an integrated view of the data, the ability to provide adequate security protection, the amount of data required, and the time frame in which data is required. The applications described here demonstrate new ways that the VA is reaping benefits from its infrastructure and its compatible integrated hospital information systems located at its facilities. The needs that have been met are also needs of private hospitals. However, in many cases the infrastructure to allow data exchange is not present. The VA's experiences may serve to establish the benefits that can be obtained by all hospitals.
Enhancing UCSF Chimera through web services
Huang, Conrad C.; Meng, Elaine C.; Morris, John H.; Pettersen, Eric F.; Ferrin, Thomas E.
2014-01-01
Integrating access to web services with desktop applications allows for an expanded set of application features, including performing computationally intensive tasks and convenient searches of databases. We describe how we have enhanced UCSF Chimera (http://www.rbvi.ucsf.edu/chimera/), a program for the interactive visualization and analysis of molecular structures and related data, through the addition of several web services (http://www.rbvi.ucsf.edu/chimera/docs/webservices.html). By streamlining access to web services, including the entire job submission, monitoring and retrieval process, Chimera makes it simpler for users to focus on their science projects rather than data manipulation. Chimera uses Opal, a toolkit for wrapping scientific applications as web services, to provide scalable and transparent access to several popular software packages. We illustrate Chimera's use of web services with an example workflow that interleaves use of these services with interactive manipulation of molecular sequences and structures, and we provide an example Python program to demonstrate how easily Opal-based web services can be accessed from within an application. Web server availability: http://webservices.rbvi.ucsf.edu/opal2/dashboard?command=serviceList. PMID:24861624
Partial gravity habitat study: With application to lunar base design
NASA Technical Reports Server (NTRS)
Capps, Stephen; Lorandos, Jason; Akhidime, Eval; Bunch, Michael; Lund, Denise; Moore, Nathan; Murakawa, Kio; Bell, Larry; Trotti, Guillermo; Neubek, Deb
1989-01-01
Comprehensive design requirements associated with designing habitats for humans in a partial gravity environment were investigated and then applied to a lunar base design. Other potential sites for application include planetary surfaces such as Mars, variable gravity research facilities, or a rotating spacecraft. Design requirements for partial gravity environments include: (1) locomotion changes in less than normal Earth gravity; (2) facility design issues, such as interior configuration, module diameter and geometry; and (3) volumetric requirements based on the previous as well as psychological issues involved in prolonged isolation. For application to a Lunar Base, it was necessary to study the exterior architecture and configuration to insure optimum circulation patterns while providing dual egress. Radiation protection issues were addressed to provide a safe and healthy environment for the crew, and finally, the overall site was studied to locate all associated facilities in context with the habitat. Mission planning was not the purpose of this study; therefore, a Lockheed scenario was used as an outline for the Lunar Base application, which was then modified to meet the project needs.
Quantitative optical metrology with CMOS cameras
NASA Astrophysics Data System (ADS)
Furlong, Cosme; Kolenovic, Ervin; Ferguson, Curtis F.
2004-08-01
Recent advances in laser technology, optical sensing, and computer processing of data, have lead to the development of advanced quantitative optical metrology techniques for high accuracy measurements of absolute shapes and deformations of objects. These techniques provide noninvasive, remote, and full field of view information about the objects of interest. The information obtained relates to changes in shape and/or size of the objects, characterizes anomalies, and provides tools to enhance fabrication processes. Factors that influence selection and applicability of an optical technique include the required sensitivity, accuracy, and precision that are necessary for a particular application. In this paper, sensitivity, accuracy, and precision characteristics in quantitative optical metrology techniques, and specifically in optoelectronic holography (OEH) based on CMOS cameras, are discussed. Sensitivity, accuracy, and precision are investigated with the aid of National Institute of Standards and Technology (NIST) traceable gauges, demonstrating the applicability of CMOS cameras in quantitative optical metrology techniques. It is shown that the advanced nature of CMOS technology can be applied to challenging engineering applications, including the study of rapidly evolving phenomena occurring in MEMS and micromechatronics.
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
This document provides guidance for retrofitting existing fluorescent troffers including the LED and associated control options available, the pro/cons and costs/benefits of each option, and agency specific requirements (where applicable).
Medical applications of artificial olfactometry
NASA Technical Reports Server (NTRS)
Wong, Bernard (Inventor); Kelso, David M. (Inventor); Munoz, Beth C. (Inventor); Lewis, Nathan S. (Inventor); Severin, Erik J. (Inventor)
2005-01-01
The present invention provides methods for detecting the presence of an analyte indicative of various medical conditions, including halitosis, periodontal disease and other diseases are also disclosed.
Microgravity science and applications bibliography, 1988 revision
NASA Technical Reports Server (NTRS)
1989-01-01
The Microgravity Science and Applications (MSA) Bibliography is a compilation of government reports, contractor reports, conference proceedings, and journal articles dealing with flight experiments utilizing a low-gravity environment to elucidate and control various processes or with ground-based activities that provide supporting research. It encompasses literature published but not cited in the 1984 Revision and the literature which was published in the past year. Subdivisions of the bibliography include: electronic materials; metals, alloys, and composites; fluid dynamics and transports; biotechnology; glass and ceramics; and combustion. Also included are publications from the European, Soviet, and Japanese MSA programs. In addition, there is a list of patents and appendices providing a compilation of anonymously authored collections of reports and a cross reference index.
Flight project data book, 1991
NASA Technical Reports Server (NTRS)
1991-01-01
The Office of Space Science and Applications (OSSA) is responsible for planning, directing, executing, and evaluating that part of the overall NASA program that has as its goal the use of the unique characteristics of the space environment to conduct a scientific study of the universe, to solve practical problems on Earth, and to provide the scientific research foundation for expanding human presence beyond Earth into the solar system. OSSA manages the development of NASA's flight instrumentation for space science and applications including free flying spacecraft, Shuttle and Space Station payloads, and the suborbital sounding rockets, balloons, and aircraft programs. A summary is provided of future flight missions, including those approved and currently under development and those which appear in the OSSA strategic plan.
Jeong, Jaeyoung; Kim, Juho; Song, Kwangsun; Autumn, Kellar; Lee, Jongho
2014-01-01
Developing electronics in unconventional forms provides opportunities to expand the use of electronics in diverse applications including bio-integrated or implanted electronics. One of the key challenges lies in integrating semiconductor microdevices onto unconventional substrates without glue, high pressure or temperature that may cause damage to microdevices, substrates or interfaces. This paper describes a solution based on natural gecko setal arrays that switch adhesion mechanically on and off, enabling pick and place manipulation of thin microscale semiconductor materials onto diverse surfaces including plants and insects whose surfaces are usually rough and irregular. A demonstration of functional ‘geckoprinted’ microelectronic devices provides a proof of concept of our results in practical applications. PMID:25056216
Microorganisms meet solid minerals: interactions and biotechnological applications.
Ng, Daphne H P; Kumar, Amit; Cao, Bin
2016-08-01
In natural and engineered environments, microorganisms often co-exist and interact with various minerals or mineral-containing solids. Microorganism-mineral interactions contribute significantly to environmental processes, including biogeochemical cycles in natural ecosystems and biodeterioration of materials in engineered environments. In this mini-review, we provide a summary of several key mechanisms involved in microorganism-mineral interactions, including the following: (i) solid minerals serve as substrata for biofilm development; (ii) solid minerals serve as an electron source or sink for microbial respiration; (iii) solid minerals provide microorganisms with macro or micronutrients for cell growth; and (iv) (semi)conductive solid minerals serve as extracellular electron conduits facilitating cell-to-cell interactions. We also highlight recent developments in harnessing microbe-mineral interactions for biotechnological applications.
NASA Astrophysics Data System (ADS)
Aleman, A.
2017-12-01
This presentation will provide an overview and discussion of the Global Change Master Directory (GCMD) Keywords and their applications in Earth science data discovery. The GCMD Keywords are a hierarchical set of controlled keywords covering the Earth science disciplines, including: science keywords, service keywords, data centers, projects, location, data resolution, instruments and platforms. Controlled vocabularies (keywords) help users accurately, consistently and comprehensively categorize their data and also allow for the precise search and subsequent retrieval of data. The GCMD Keywords are a community resource and are developed collaboratively with input from various stakeholders, including GCMD staff, keyword users and metadata providers. The GCMD Keyword Landing Page and GCMD Keyword Community Forum provide access to keyword resources and an area for discussion of topics related to the GCMD Keywords. See https://earthdata.nasa.gov/about/gcmd/global-change-master-directory-gcmd-keywords
Novel Space-based Solar Power Technologies and Architectures for Earth and Beyond
NASA Technical Reports Server (NTRS)
Howell, Joe T.; Fikes, John C.; O'Neill, Mark J.
2005-01-01
Research, development and studies of novel space-based solar power systems, technologies and architectures for Earth and beyond are needed to reduce the cost of clean electrical power for terrestrial use and to provide a stepping stone for providing an abundance of power in space, i.e., manufacturing facilities, tourist facilities, delivery of power between objects in space, and between space and surface sites. The architectures, technologies and systems needed for space to Earth applications may also be used for in-space applications. Advances in key technologies, i.e., power generation, power management and distribution, power beaming and conversion of beamed power are needed to achieve the objectives of both terrestrial and extraterrestrial applications. Power beaming or wireless power transmission (WPT) can involve lasers or microwaves along with the associated power interfaces. Microwave and laser transmission techniques have been studied with several promising approaches to safe and efficient WPT identified. These investigations have included microwave phased array transmitters, as well as laser transmission and associated optics. There is a need to produce "proof-of-concept" validation of critical WPT technologies for both the near-term, as well as far-term applications. Investments may be harvested in near-term beam safe demonstrations of commercial WPT applications. Receiving sites (users) include ground-based stations for terrestrial electrical power, orbital sites to provide power for satellites and other platforms, future space elevator systems, space vehicle propulsion, and space to surface sites. This paper briefly discusses achieving a promising approach to the solar power generation and beamed power conversion. The approach is based on a unique high-power solar concentrator array called Stretched Lens Array (SLA) for both solar power generation and beamed power conversion. Since both versions (solar and laser) of SLA use many identical components (only the photovoltaic cells need to be different), economies of manufacturing and scale may be realized by using SLA on both ends of the laser power beaming system in a space solar power application. Near-term uses of this SLA-laser-SLA system may include terrestrial and space exploration in near Earth space. Later uses may include beamed power for bases or vehicles on Mars.
Personal review and justice analysis of nursing experiences in Haiti.
Emmott, Helen
2008-08-01
Health care providers frequently struggle to develop wise applications of theoretical knowledge. As a nurse studying traditional approaches in ethics while simultaneously volunteering in Haiti, I wrestled with the notion of justice in the midst of radical material inequities. Paul Farmer, physician and anthropologist, provides an analytic perspective for health care providers who work in poor and underserved countries by expanding the liberation theology of the 1970s to include social applications. Analyzing my past experiences in Haiti using Farmer's methodology provided insight into my successes and failures and prompted me to search for personal and professional reasons to provide care for the poor in the future. This type of reflection is essential for health care providers who work with the underserved, regardless of their religion or the country in which they work.
Cell refractive index for cell biology and disease diagnosis: past, present and future.
Liu, P Y; Chin, L K; Ser, W; Chen, H F; Hsieh, C-M; Lee, C-H; Sung, K-B; Ayi, T C; Yap, P H; Liedberg, B; Wang, K; Bourouina, T; Leprince-Wang, Y
2016-02-21
Cell refractive index is a key biophysical parameter, which has been extensively studied. It is correlated with other cell biophysical properties including mechanical, electrical and optical properties, and not only represents the intracellular mass and concentration of a cell, but also provides important insight for various biological models. Measurement techniques developed earlier only measure the effective refractive index of a cell or a cell suspension, providing only limited information on cell refractive index and hence hindering its in-depth analysis and correlation. Recently, the emergence of microfluidic, photonic and imaging technologies has enabled the manipulation of a single cell and the 3D refractive index of a single cell down to sub-micron resolution, providing powerful tools to study cells based on refractive index. In this review, we provide an overview of cell refractive index models and measurement techniques including microfluidic chip-based techniques for the last 50 years, present the applications and significance of cell refractive index in cell biology, hematology, and pathology, and discuss future research trends in the field, including 3D imaging methods, integration with microfluidics and potential applications in new and breakthrough research areas.
Optics education in an optometric setting
NASA Astrophysics Data System (ADS)
Putnam, Nicole M.
2017-08-01
The first year optics curriculum at the Arizona College of Optometry aims to provide students with an understanding of geometrical, physical, and visual optics principals that will be the foundation of their clinical understanding of the optics of the eye and its correction in advanced courses such as ophthalmic optics and contact lenses. Although the optics of the eye are a fantastic model to use in optics education, the clinical applications may not become apparent until later in the course of study. Successful strategies are needed to engage students and facilitate the understanding of optical principals and the growth of process skills including problem solving, analysis, and critical thinking that will help in their future as health care providers. These include the implementation of ophthalmic applications as early as possible, encouragement of group work including open office hours, and the use of video problem set solutions to supplement traditional static solutions.
4000 K--And All Done by Mirrors!
ERIC Educational Resources Information Center
Spurgin, Bernard
1994-01-01
Provides a brief account of early attempts to concentrate the sun's radiation for heating purposes and reports on 20th-century attempts to do the same, including the solar furnace in the French Pyrenees. Includes a discussion of the solar constant and its applications. (DDR)
ERIC Educational Resources Information Center
Lorenzen, Elizabeth A.; And Others
This paper describes the various types of correspondence used in the job search process and provides guidelines and samples of each type. Types of letters discussed include cover letters (including letters of application and prospecting letters), networking letters, thank-you letters, acceptance letters, withdrawal letters, and rejection of offer…
Use of JPSS ATMS, CrIS, and VIIRS data to Improve Tropical Cyclone Track and Intensity Forecasting
NASA Astrophysics Data System (ADS)
Chirokova, G.; Demaria, M.; DeMaria, R.; Knaff, J. A.; Dostalek, J.; Musgrave, K. D.; Beven, J. L.
2015-12-01
JPSS data provide unique information that could be critical for the forecasting of tropical cyclone (TC) track and intensity and is currently underutilized. Preliminary results from several TC applications using data from the Advanced Technology Microwave Sounder (ATMS), the Cross-Track Infrared Sounder (CrIS), and the Visible Infrared Imaging Radiometer Suite (VIIRS), carried by the Suomi National Polar-Orbiting Partnership satellite (SNPP), will be discussed. The first group of applications, which includes applications for moisture flux and for eye-detection, aims to improve rapid intensification (RI) forecasts, which is one of the highest priorities within NOAA. The applications could be used by forecasters directly and will also provide additional input to the Rapid Intensification Index (RII), the statistical-dynamical tool for forecasting RI events that is operational at the National Hurricane Center. The moisture flux application uses bias-corrected ATMS-MIRS (Microwave Integrated Retrieval System) and NUCAPS (NOAA Unique CrIS ATMS Processing System), retrievals that provide very accurate temperature and humidity soundings in the TC environment to detect dry air intrusions. The objective automated eye-detection application uses geostationary and VIIRS data in combination with machine learning and computer vision techniques for determining the onset of eye formation which is very important for TC intensity forecast but is usually determined by subjective methods. First version of the algorithm showed very promising results with a 75% success rate. The second group of applications develops tools to better utilize VIIRS data, including day-night band (DNB) imagery, for tropical cyclone forecasting. Disclaimer: The views, opinions, and findings contained in this article are those of the authors and should not be construed as an official National Oceanic and Atmospheric Administration (NOAA) or U.S. Government position, policy, or decision.
Khander, Amrin; Farag, Sara; Chen, Katherine T
2017-12-22
With an increasing number of patients requiring translator services, many providers are turning to mobile applications (apps) for assistance. However, there have been no published reviews of medical translator apps. To identify and evaluate medical translator mobile apps using an adapted APPLICATIONS scoring system. A list of apps was identified from the Apple iTunes and Google Play stores, using the search term, "medical translator." Apps not found on two different searches, not in an English-based platform, not used for translation, or not functional after purchase, were excluded. The remaining apps were evaluated using an adapted APPLICATIONS scoring system, which included both objective and subjective criteria. App comprehensiveness was a weighted score defined by the number of non-English languages included in each app relative to the proportion of non-English speakers in the United States. The Apple iTunes and Google Play stores. Medical translator apps identified using the search term "medical translator." Main Outcomes and Measures: Compilation of medical translator apps for provider usage. A total of 524 apps were initially found. After applying the exclusion criteria, 20 (8.2%) apps from the Google Play store and 26 (9.2%) apps from the Apple iTunes store remained for evaluation. The highest scoring apps, Canopy Medical Translator, Universal Doctor Speaker, and Vocre Translate, scored 13.5 out of 18.7 possible points. A large proportion of apps initially found did not function as medical translator apps. Using the APPLICATIONS scoring system, we have identified and evaluated medical translator apps for providers who care for non-English speaking patients.
Ultra-High Temperature Materials Characterization for Propulsion Applications
NASA Technical Reports Server (NTRS)
Rogers, Jan; Hyers, Robert
2007-01-01
Propulsion system efficiency increases as operating temperatures are increased. Some very high-temperature materials are being developed, including refractory metal alloys, carbides, borides, and silicides. System design requires data for materials properties at operating temperatures. Materials property data are not available for many materials of interest at the desired operating temperatures (up to approx. 3000 K). The objective of this work is to provide important physical property data at ultra-high temperatures. The MSFC Electrostatic levitation (ESL) facility can provide measurements of thermophysical properties which include: creep strength, density and thermal expansion for materials being developed for propulsion applications. The ESL facility uses electrostatic fields to position samples between electrodes during processing and characterization studies. Because the samples float between the electrodes during studies, they are free from any contact with a container or test apparatus. This provides a high purity environment for the study of high-temperature, reactive materials. ESL can be used to process a wide variety of materials including metals, alloys, ceramics, glasses and semiconductors. The MSFC ESL has provided non-contact measurements of properties of materials up to 3400 C. Density and thermal expansion are measured by analyzing digital images of the sample at different temperatures. Our novel, non-contact method for measuring creep uses rapid rotation to deform the sample. Digital images of the deformed samples are analyzed to obtain the creep properties, which match those obtained using ASTM Standard E-139 for Nb at 1985 C. Data from selected ESL-based characterization studies will be presented. The ESL technique could support numerous propulsion technologies by advancing the knowledge base and the technology readiness level for ultra-high temperature materials. Applications include non-eroding nozzle materials and lightweight, high-temperature alloys for turbines and structures.
Applications of Cell Microencapsulation.
Opara, Emmanuel C
2017-01-01
The goal of this chapter is to provide an overview of the different purposes for which the cell microencapsulation technology can be used. These include immunoisolation of non-autologous cells used for cell therapy; immobilization of cells for localized (targeted) delivery of therapeutic products to ablate, repair, or regenerate tissue; simultaneous delivery of multiple therapeutic agents in cell therapy; spatial compartmentalization of cells in complex tissue engineering; expansion of cells in culture; and production of different probiotics and metabolites for industrial applications. For each of these applications, specific examples are provided to illustrate how the microencapsulation technology can be utilized to achieve the purpose. However, successful use of the cell microencapsulation technology for whatever purpose will ultimately depend upon careful consideration for the choice of the encapsulating polymers, the method of fabrication (cross-linking) of the microbeads, which affects the permselectivity, the biocompatibility and the mechanical strength of the microbeads as well as environmental parameters such as temperature, humidity, osmotic pressure, and storage solutions.The various applications discussed in this chapter are illustrated in the different chapters of this book and where appropriate relevant images of the microencapsulation products are provided. It is hoped that this outline of the different applications of cell microencapsulation would provide a good platform for tissue engineers, scientists, and clinicians to design novel tissue constructs and products for therapeutic and industrial applications.
Civil Applications of National Satellites
NASA Astrophysics Data System (ADS)
Killam, Dudley B.
2002-01-01
For over thirty years, the United States Air Force has employed infrared surveillance for missile warning purposes in support of peace. The Defense Support Program, currently employed in this way, consists of a constellation of satellites that provide civil-oriented, peace preserving infrared surveillance. Such civil applications include monitoring parched areas for wind-whipped brush fires or lightning-initiated forest fires that consume many acres of timber and threaten populated areas. Other applications include the similar monitoring of static, infrared-sensed heat sources including volcanoes and the plumes of acrid smoke produced when the volcanoes are active. This paper will address these important missions that can be performed by the national infrared surveillance satellite constellations, furthering the peace of the world in ways never envisioned by their creators 30 years ago.
Chen, Rong; Chung, Shin-Ho
2013-01-01
The discovery of new drugs that selectively block or modulate ion channels has great potential to provide new treatments for a host of conditions. One promising avenue revolves around modifying or mimicking certain naturally occurring ion channel modulator toxins. This strategy appears to offer the prospect of designing drugs that are both potent and specific. The use of computational modeling is crucial to this endeavor, as it has the potential to provide lower cost alternatives for exploring the effects of new compounds on ion channels. In addition, computational modeling can provide structural information and theoretical understanding that is not easily derivable from experimental results. In this review, we look at the theory and computational methods that are applicable to the study of ion channel modulators. The first section provides an introduction to various theoretical concepts, including force-fields and the statistical mechanics of binding. We then look at various computational techniques available to the researcher, including molecular dynamics, Brownian dynamics, and molecular docking systems. The latter section of the review explores applications of these techniques, concentrating on pore blocker and gating modifier toxins of potassium and sodium channels. After first discussing the structural features of these channels, and their modes of block, we provide an in-depth review of past computational work that has been carried out. Finally, we discuss prospects for future developments in the field. PMID:23589832
Radioisotope Power Sources for MEMS Devices,
DOE Office of Scientific and Technical Information (OSTI.GOV)
Blanchard, J.P.
2001-06-17
Microelectromechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in airbags to more recent optical applications. Depending on the application, these devices often require an on-board power source for remote operation, especially in cases requiring operation for an extended period of time. Previously suggested power sources include fossil fuels and solar energy, but nuclear power sources may provide significant advantages for certain applications. Hence, the objective of this study is to establish the viability of using radioisotopes to power realistic MEMS devices. A junction-type battery was constructed using silicon and a {sup 63}Ni liquidmore » source. A source volume containing 64 {micro}Ci provided a power of {approx}0.07 nW. A more novel application of nuclear sources for MEMS applications involves the creation of a resonator that is driven by charge collection in a cantilever beam. Preliminary results have established the feasibility of this concept, and future work will optimize the design for various applications.« less
Banta, E.R.; Hill, M.C.; Poeter, E.; Doherty, J.E.; Babendreier, J.
2008-01-01
The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input and output conventions allow application users to access various applications and the analysis methods they embody with a minimum of time and effort. Process models simulate, for example, physical, chemical, and (or) biological systems of interest using phenomenological, theoretical, or heuristic approaches. The types of model analyses supported by the JUPITER API include, but are not limited to, sensitivity analysis, data needs assessment, calibration, uncertainty analysis, model discrimination, and optimization. The advantages provided by the JUPITER API for users and programmers allow for rapid programming and testing of new ideas. Application-specific coding can be in languages other than the Fortran-90 of the API. This article briefly describes the capabilities and utility of the JUPITER API, lists existing applications, and uses UCODE_2005 as an example.
Guide to U.S. Department of Education Programs, 2003.
ERIC Educational Resources Information Center
Office of Public Affairs (ED), Washington, DC.
This reference guide describes Department of Education programs authorized and funded under federal law, along with any applicable competitions made possible by these programs. It includes information on funding for laboratories, centers, and other facilities that provide important resources for education. Information is provided on financial…
7 CFR 1493.280 - Evidence of export report.
Code of Federal Regulations, 2013 CFR
2013-01-01
... OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program... to provide CCC an evidence of export report for each shipment of goods or provision of services... provided were included in the final application for a final commitment as approved by CCC for coverage...
7 CFR 1493.280 - Evidence of export report.
Code of Federal Regulations, 2012 CFR
2012-01-01
... OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program... to provide CCC an evidence of export report for each shipment of goods or provision of services... provided were included in the final application for a final commitment as approved by CCC for coverage...
7 CFR 1493.280 - Evidence of export report.
Code of Federal Regulations, 2014 CFR
2014-01-01
... OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program... to provide CCC an evidence of export report for each shipment of goods or provision of services... provided were included in the final application for a final commitment as approved by CCC for coverage...
An information adaptive system study report and development plan
NASA Technical Reports Server (NTRS)
Ataras, W. S.; Eng, K.; Morone, J. J.; Beaudet, P. R.; Chin, R.
1980-01-01
The purpose of the information adaptive system (IAS) study was to determine how some selected Earth resource applications may be processed onboard a spacecraft and to provide a detailed preliminary IAS design for these applications. Detailed investigations of a number of applications were conducted with regard to IAS and three were selected for further analysis. Areas of future research and development include algorithmic specifications, system design specifications, and IAS recommended time lines.
Programmable Logic Application Notes
NASA Technical Reports Server (NTRS)
Katz, Richard
1998-01-01
This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter's column will include some announcements and some recent radiation test results and evaluations of interest. Specifically, the following topics will be covered: the Military and Aerospace Applications of Programmable Devices and Technologies Conference to be held at GSFC in September, 1998, proton test results, and some total dose results.
Review on electrochromic devices for automotive glazing
NASA Astrophysics Data System (ADS)
Demiryont, Hulya
1991-12-01
Electrochromic materials have been intensively studied for applications of various switchable optical systems. These materials exhibit adjustable optical absorption upon reversible oxidation/reduction processes. Since a reversible oxidation/reduction phenomenon is provided by electrically-driven electrochemical reactions, these materials are known as electrochromics. There are many publications including proceedings, books, and review articles written on electrochromic (EC) materials and their applications. This paper focuses on conventional and some new electrochromic devices (ECD), their specifications, and applications.
ERIC Educational Resources Information Center
Houke, Charlotte
2017-01-01
This paper explores the purpose of designing and using projects with real world application in a M.B.A. managerial accounting class. Included is a discussion of how and why the Balanced Scorecard (BSC) Project has been used in classes to link theory with practice by providing real world application of the BSC framework. M.B.A. students represent a…
NASA Technical Reports Server (NTRS)
Redmann, G. H.
1976-01-01
Recent advances in image processing and new applications are presented to the user community to stimulate the development and transfer of this technology to industrial and commercial applications. The Proceedings contains 37 papers and abstracts, including many illustrations (some in color) and provides a single reference source for the user community regarding the ordering and obtaining of NASA-developed image-processing software and science data.
Application-specific coarse-grained reconfigurable array: architecture and design methodology
NASA Astrophysics Data System (ADS)
Zhou, Li; Liu, Dongpei; Zhang, Jianfeng; Liu, Hengzhu
2015-06-01
Coarse-grained reconfigurable arrays (CGRAs) have shown potential for application in embedded systems in recent years. Numerous reconfigurable processing elements (PEs) in CGRAs provide flexibility while maintaining high performance by exploring different levels of parallelism. However, a difference remains between the CGRA and the application-specific integrated circuit (ASIC). Some application domains, such as software-defined radios (SDRs), require flexibility with performance demand increases. More effective CGRA architectures are expected to be developed. Customisation of a CGRA according to its application can improve performance and efficiency. This study proposes an application-specific CGRA architecture template composed of generic PEs (GPEs) and special PEs (SPEs). The hardware of the SPE can be customised to accelerate specific computational patterns. An automatic design methodology that includes pattern identification and application-specific function unit generation is also presented. A mapping algorithm based on ant colony optimisation is provided. Experimental results on the SDR target domain show that compared with other ordinary and application-specific reconfigurable architectures, the CGRA generated by the proposed method performs more efficiently for given applications.
Carbon composites in space vehicle structures
NASA Technical Reports Server (NTRS)
Mayer, N. J.
1974-01-01
Recent developments in the technology of carbon or graphite filaments now provide the designer with greatly improved materials offering high specific strength and modulus. Besides these advantages are properties which are distinctly useful for space applications and which provide feasibility for missions not obtainable by other means. Current applications include major and secondary structures of communications satellites. A number of R & D projects are exploring carbon-fiber application to rocket engine motor cases, advanced antenna systems, and space shuttle components. Future system studies are being made, based on the successful application of carbon fibers for orbiting space telescope assemblies, orbital transfer vehicles, and very large deployable energy generation systems. Continued technology development is needed in analysis, material standards, and advanced structural concepts to exploit the full potential of carbon filaments in composite materials.
Developing integrated methods to address complex resource and environmental issues
Smith, Kathleen S.; Phillips, Jeffrey D.; McCafferty, Anne E.; Clark, Roger N.
2016-02-08
IntroductionThis circular provides an overview of selected activities that were conducted within the U.S. Geological Survey (USGS) Integrated Methods Development Project, an interdisciplinary project designed to develop new tools and conduct innovative research requiring integration of geologic, geophysical, geochemical, and remote-sensing expertise. The project was supported by the USGS Mineral Resources Program, and its products and acquired capabilities have broad applications to missions throughout the USGS and beyond.In addressing challenges associated with understanding the location, quantity, and quality of mineral resources, and in investigating the potential environmental consequences of resource development, a number of field and laboratory capabilities and interpretative methodologies evolved from the project that have applications to traditional resource studies as well as to studies related to ecosystem health, human health, disaster and hazard assessment, and planetary science. New or improved tools and research findings developed within the project have been applied to other projects and activities. Specifically, geophysical equipment and techniques have been applied to a variety of traditional and nontraditional mineral- and energy-resource studies, military applications, environmental investigations, and applied research activities that involve climate change, mapping techniques, and monitoring capabilities. Diverse applied geochemistry activities provide a process-level understanding of the mobility, chemical speciation, and bioavailability of elements, particularly metals and metalloids, in a variety of environmental settings. Imaging spectroscopy capabilities maintained and developed within the project have been applied to traditional resource studies as well as to studies related to ecosystem health, human health, disaster assessment, and planetary science. Brief descriptions of capabilities and laboratory facilities and summaries of some applications of project products and research findings are included in this circular. The work helped support the USGS mission to “provide reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life.” Activities within the project include the following:Spanned scales from microscopic to planetary;Demonstrated broad applications across disciplines;Included life-cycle studies of mineral resources;Incorporated specialized areas of expertise in applied geochemistry including mineralogy, hydrogeology, analytical chemistry, aqueous geochemistry, biogeochemistry, microbiology, aquatic toxicology, and public health; andIncorporated specialized areas of expertise in geophysics including magnetics, gravity, radiometrics, electromagnetics, seismic, ground-penetrating radar, borehole radar, and imaging spectroscopy.This circular consists of eight sections that contain summaries of various activities under the project. The eight sections are listed below:Laboratory Facilities and Capabilities, which includes brief descriptions of the various types of laboratories and capabilities used for the project;Method and Software Development, which includes summaries of remote-sensing, geophysical, and mineralogical methods developed or enhanced by the project;Instrument Development, which includes descriptions of geophysical instruments developed under the project;Minerals, Energy, and Climate, which includes summaries of research that applies to mineral or energy resources, environmental processes and monitoring, and carbon sequestration by earth materials;Element Cycling, Toxicity, and Health, which includes summaries of several process-oriented geochemical and biogeochemical studies and health-related research activities;Hydrogeology and Water Quality, which includes descriptions of innovative geophysical, remote-sensing, and geochemical research pertaining to hydrogeology and water-quality applications;Hazards and Disaster Assessment, which includes summaries of research and method development that were applied to natural hazards, human-caused hazards, and disaster assessments; andDatabases and Framework Studies, which includes descriptions of fundamental applications of geophysical studies and of the importance of archived data.
Mathematics and Sports. Mathematical World. Volume 3.
ERIC Educational Resources Information Center
Sadovskii, L. E.; Sadovskii, A. L.
This volume contains some examples of mathematical applications in sports. Sports discussed include tennis, figure skating, gymnastics, track and field, soccer, skiing, hockey, and swimming. Problems and situations are posed and answers with thorough explanations are provided. Chapters include: (1) Mathematics and Sports; (2) What Is Applied…
A Scoping-Level Field Monitoring Study of Synthetic Turf Fields and Playgrounds
Recycled tire material, or "tire crumb," is used as a component in many recreational fields, including synthetic turf fields and playgrounds. The use of tire crumbs in these applications provides several benefits, including reduced sports injury. The public recently has raised co...
47 CFR 1.2102 - Eligibility of applications for competitive bidding.
Code of Federal Regulations, 2010 CFR
2010-10-01
... radio services, including private internal radio services used by state and local governments and non-government entities and including emergency road services provided by not-for-profit organizations, that (i... to the public; (2) Initial licenses or construction permits for digital television service given to...
NASA Astrophysics Data System (ADS)
Ames, D. P.
2013-12-01
As has been seen in other informatics fields, well-documented and appropriately licensed open source software tools have the potential to significantly increase both opportunities and motivation for inter-institutional science and technology collaboration. The CUAHSI HIS (and related HydroShare) projects have aimed to foster such activities in hydrology resulting in the development of many useful community software components including the HydroDesktop software application. HydroDesktop is an open source, GIS-based, scriptable software application for discovering data on the CUAHSI Hydrologic Information System and related resources. It includes a well-defined plugin architecture and interface to allow 3rd party developers to create extensions and add new functionality without requiring recompiling of the full source code. HydroDesktop is built in the C# programming language and uses the open source DotSpatial GIS engine for spatial data management. Capabilities include data search, discovery, download, visualization, and export. An extension that integrates the R programming language with HydroDesktop provides scripting and data automation capabilities and an OpenMI plugin provides the ability to link models. Current revision and updates to HydroDesktop include migration of core business logic to cross platform, scriptable Python code modules that can be executed in any operating system or linked into other software front-end applications.
A practical approach in porous medium combustion for domestic application: A review
NASA Astrophysics Data System (ADS)
Ismail, A. K.; Ibrahim, N. H.; Shamsuddin, K. A.; Abdullah, M. Z.; Zubair, M.
2018-05-01
Combustion in porous media has been widely studied. Many application involving the combustion of porous media has been reported in various way with most consider on numerical works and industrial application. Besides, recent application of porous medium combustion for domestic is the topic of interest among researchers. In this paper, a review was conducted on the combustion of porous media in term of practical application for domestic consumers. Details on the type of fuel used including bio fuel and their system have been search thoroughly. Most of the system have utilized compressed air system to provide lean combustion in domestic application. Some self-aspirating system of porous medium burner was also reported. The application of new technology such as cogeneration by using thermoelectric cells in tandem with porous medium combustion is also revised according to recent work which have already been published. Besides, the recent advances which include coating of porous material is also considered at the end of this paper.
TRMM Precipitation Application Examples Using Data Services at NASA GES DISC
NASA Technical Reports Server (NTRS)
Liu, Zhong; Ostrenga, D.; Teng, W.; Kempler, S.; Greene, M.
2012-01-01
Data services to support precipitation applications are important for maximizing the NASA TRMM (Tropical Rainfall Measuring Mission) and the future GPM (Global Precipitation Mission) mission's societal benefits. TRMM Application examples using data services at the NASA GES DISC, including samples from users around the world will be presented in this poster. Precipitation applications often require near-real-time support. The GES DISC provides such support through: 1) Providing near-real-time precipitation products through TOVAS; 2) Maps of current conditions for monitoring precipitation and its anomaly around the world; 3) A user friendly tool (TOVAS) to analyze and visualize near-real-time and historical precipitation products; and 4) The GES DISC Hurricane Portal that provides near-real-time monitoring services for the Atlantic basin. Since the launch of TRMM, the GES DISC has developed data services to support precipitation applications around the world. In addition to the near-real-time services, other services include: 1) User friendly TRMM Online Visualization and Analysis System (TOVAS; URL: http://disc2.nascom.nasa.gov/Giovanni/tovas/); 2) Mirador (http://mirador.gsfc.nasa.gov/), a simplified interface for searching, browsing, and ordering Earth science data at GES DISC. Mirador is designed to be fast and easy to learn; 3) Data via OPeNDAP (http://disc.sci.gsfc.nasa.gov/services/opendap/). The OPeNDAP provides remote access to individual variables within datasets in a form usable by many tools, such as IDV, McIDAS-V, Panoply, Ferret and GrADS; and 4) The Open Geospatial Consortium (OGC) Web Map Service (WMS) (http://disc.sci.gsfc.nasa.gov/services/wxs_ogc.shtml). The WMS is an interface that allows the use of data and enables clients to build customized maps with data coming from a different network.
Space Tethers: Design Criteria
NASA Technical Reports Server (NTRS)
Tomlin, D. D.; Faile, G. C.; Hayashida, K. B.; Frost, C. L.; Wagner, C. Y.; Mitchell, M. L.; Vaughn, J. A.; Galuska, M. J.
1997-01-01
This document is prepared to provide a systematic process for the selection of tethers for space applications. Criteria arc provided for determining the strength requirement for tether missions and for mission success from tether severing due to micrometeoroids and orbital debris particle impacts. Background information of materials for use in space tethers is provided, including electricity-conducting tethers. Dynamic considerations for tether selection is also provided. Safety, quality, and reliability considerations are provided for a tether project.
DaGO-Fun: tool for Gene Ontology-based functional analysis using term information content measures.
Mazandu, Gaston K; Mulder, Nicola J
2013-09-25
The use of Gene Ontology (GO) data in protein analyses have largely contributed to the improved outcomes of these analyses. Several GO semantic similarity measures have been proposed in recent years and provide tools that allow the integration of biological knowledge embedded in the GO structure into different biological analyses. There is a need for a unified tool that provides the scientific community with the opportunity to explore these different GO similarity measure approaches and their biological applications. We have developed DaGO-Fun, an online tool available at http://web.cbio.uct.ac.za/ITGOM, which incorporates many different GO similarity measures for exploring, analyzing and comparing GO terms and proteins within the context of GO. It uses GO data and UniProt proteins with their GO annotations as provided by the Gene Ontology Annotation (GOA) project to precompute GO term information content (IC), enabling rapid response to user queries. The DaGO-Fun online tool presents the advantage of integrating all the relevant IC-based GO similarity measures, including topology- and annotation-based approaches to facilitate effective exploration of these measures, thus enabling users to choose the most relevant approach for their application. Furthermore, this tool includes several biological applications related to GO semantic similarity scores, including the retrieval of genes based on their GO annotations, the clustering of functionally related genes within a set, and term enrichment analysis.
nmsBuilder: Freeware to create subject-specific musculoskeletal models for OpenSim.
Valente, Giordano; Crimi, Gianluigi; Vanella, Nicola; Schileo, Enrico; Taddei, Fulvia
2017-12-01
Musculoskeletal modeling and simulations of movement have been increasingly used in orthopedic and neurological scenarios, with increased attention to subject-specific applications. In general, musculoskeletal modeling applications have been facilitated by the development of dedicated software tools; however, subject-specific studies have been limited also by time-consuming modeling workflows and high skilled expertise required. In addition, no reference tools exist to standardize the process of musculoskeletal model creation and make it more efficient. Here we present a freely available software application, nmsBuilder 2.0, to create musculoskeletal models in the file format of OpenSim, a widely-used open-source platform for musculoskeletal modeling and simulation. nmsBuilder 2.0 is the result of a major refactoring of a previous implementation that moved a first step toward an efficient workflow for subject-specific model creation. nmsBuilder includes a graphical user interface that provides access to all functionalities, based on a framework for computer-aided medicine written in C++. The operations implemented can be used in a workflow to create OpenSim musculoskeletal models from 3D surfaces. A first step includes data processing to create supporting objects necessary to create models, e.g. surfaces, anatomical landmarks, reference systems; and a second step includes the creation of OpenSim objects, e.g. bodies, joints, muscles, and the corresponding model. We present a case study using nmsBuilder 2.0: the creation of an MRI-based musculoskeletal model of the lower limb. The model included four rigid bodies, five degrees of freedom and 43 musculotendon actuators, and was created from 3D surfaces of the segmented images of a healthy subject through the modeling workflow implemented in the software application. We have presented nmsBuilder 2.0 for the creation of musculoskeletal OpenSim models from image-based data, and made it freely available via nmsbuilder.org. This application provides an efficient workflow for model creation and helps standardize the process. We hope this would help promote personalized applications in musculoskeletal biomechanics, including larger sample size studies, and might also represent a basis for future developments for specific applications. Copyright © 2017 Elsevier B.V. All rights reserved.
Bulletin of Courses, July 1970 to December 1971, Water Pollution Control Training Program.
ERIC Educational Resources Information Center
Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.
This bulletin describes the courses offered at the five Federal Water Quality Administration training centers in the U.S. from July 1970 to December 1971. Information for applicants, applications for training forms and addresses of related Environmental Training Programs are included. The objective of the program is to provide specialized training…
Digital Pitch-And-Roll Monitor
NASA Technical Reports Server (NTRS)
Finley, Tom D.; Brown, Jeff; Campbell, Ryland
1991-01-01
Highly accurate inclinometer developed. Monitors both pitch and roll simultaneously and provides printed output on demand. Includes three mutually perpendicular accelerometers and signal-conditioning circuitry converting outputs of sensors to digital values of pitch and roll. In addition to wind-tunnel applications, system useful in any application involving steady-state, precise sensing of angles, such as calibration of robotic devices and positioners.
ERIC Educational Resources Information Center
Rust, Harry K.; And Others
This manual is intended to provide the information necessary to meet EPA standards for demonstration and research pest control and prepare for the written examination required for certification. Emphasis is placed on the principles of safe pesticide use. Chapters are included on pesticide applicator certification in Virginia, basics of pest…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-09
... addresses other than the one provided here. Comments sent via email, including all attachments, must not... determined that the application is complete. The September 12, 2011, application is the one available for... completion of the drilling season, one or two ice-management vessels, along with various support vessels...
ERIC Educational Resources Information Center
Clarkson, W. W.; And Others
The treatment of wastewater phosphorus via land application includes both chemical and biological mechanisms. Chemically, phosphorus reacts with iron, aluminum, and calcium compounds in the soil providing efficient removal over a wide range of pH values. Phosphorus is also absorbed by rooted plants which, upon harvest, constitute a further removal…
29 CFR 37.20 - What is a grant applicant's obligation to provide a written assurance?
Code of Federal Regulations, 2010 CFR
2010-07-01
... written assurance? (a)(1) Each application for financial assistance under Title I of WIA, as defined in § 37.4, must include the following assurance: As a condition to the award of financial assistance from... understands that the United States has the right to seek judicial enforcement of this assurance. (2) The...
Integration of Study Abroad with Social Media Technologies and Decision-Making Applications
ERIC Educational Resources Information Center
Deans, P. Candace
2012-01-01
This article describes the design and delivery of a program, "Global Business in a Digital World." The program integrates the use of social media technologies and business applications in a series of courses that include short-term study abroad components that focus on emerging markets. The objectives are to: (1) provide additional…
Code of Federal Regulations, 2011 CFR
2011-04-01
...; and (C) Such person is not barred from service on self-regulatory organization governing boards or... protect the public from any harm arising from the applicant's or registrant's future wrongdoing, including... any harm arising from future wrongdoing by the applicant or registrant. Any decision providing for a...
Code of Federal Regulations, 2014 CFR
2014-04-01
...; and (C) Such person is not barred from service on self-regulatory organization governing boards or... protect the public from any harm arising from the applicant's or registrant's future wrongdoing, including... any harm arising from future wrongdoing by the applicant or registrant. Any decision providing for a...
Code of Federal Regulations, 2012 CFR
2012-04-01
...; and (C) Such person is not barred from service on self-regulatory organization governing boards or... protect the public from any harm arising from the applicant's or registrant's future wrongdoing, including... any harm arising from future wrongdoing by the applicant or registrant. Any decision providing for a...
Code of Federal Regulations, 2013 CFR
2013-04-01
...; and (C) Such person is not barred from service on self-regulatory organization governing boards or... protect the public from any harm arising from the applicant's or registrant's future wrongdoing, including... any harm arising from future wrongdoing by the applicant or registrant. Any decision providing for a...
6 CFR 37.11 - Application and documents the applicant must provide.
Code of Federal Regulations, 2011 CFR
2011-01-01
... filed with a State Office of Vital Statistics or equivalent agency in the individual's State of birth... present at least one document included in paragraph (c) of this section. (e) Social security number (SSN... documents listed in § 37.11(c)(1) and (2) must present his or her Social Security Administration account...
Halogen-free benzoxazine based curable compositions for high TG applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tietze, Roger; Nguyen, Yen-Loan
The present invention provides a halogen-free curable composition including a benzoxazine monomer, at least one epoxy resin, a catalyst, a toughening agent and a solvent. The halogen-free curable composition is especially suited for use in automobile and aerospace applications since the composition, upon curing, produces a composite having a high glass transition temperature.
"UML Quiz": Automatic Conversion of Web-Based E-Learning Content in Mobile Applications
ERIC Educational Resources Information Center
von Franqué, Alexander; Tellioglu, Hilda
2014-01-01
Many educational institutions use Learning Management Systems to provide e-learning content to their students. This often includes quizzes that can help students to prepare for exams. However, the content is usually web-optimized and not very usable on mobile devices. In this work a native mobile application ("UML Quiz") that imports…
15 CFR Supplement No. 2 to Part 748 - Unique Application and Submission Requirements
Code of Federal Regulations, 2014 CFR
2014-01-01
... to reexport. (m) Robots. If you are submitting a license application for the export or reexport of items controlled by ECCNs 2B007 or 2D001 (including robots, robot controllers, end-effectors, or related software) the following information must be provided in Block 24: (1) Specify if the robot is equipped with...
15 CFR Supplement No. 2 to Part 748 - Unique Application and Submission Requirements
Code of Federal Regulations, 2012 CFR
2012-01-01
... to reexport. (m) Robots. If you are submitting a license application for the export or reexport of items controlled by ECCNs 2B007 or 2D001 (including robots, robot controllers, end-effectors, or related software) the following information must be provided in Block 24: (1) Specify if the robot is equipped with...
Optical Disk Technology and Information.
ERIC Educational Resources Information Center
Goldstein, Charles M.
1982-01-01
Provides basic information on videodisks and potential applications, including inexpensive online storage, random access graphics to complement online information systems, hybrid network architectures, office automation systems, and archival storage. (JN)
Code of Federal Regulations, 2010 CFR
2010-07-01
... provide information, including an example, on the impact of capitalization of accrued, unpaid interest on... applicable, the post-deferment grace period expire, a borrower resumes any delinquency status that existed...
An automatic data system for vibration modal tuning and evaluation
NASA Technical Reports Server (NTRS)
Salyer, R. A.; Jung, E. J., Jr.; Huggins, S. L.; Stephens, B. L.
1975-01-01
A digitally based automatic modal tuning and analysis system developed to provide an operational capability beginning at 0.1 hertz is described. The elements of the system, which provides unique control features, maximum operator visibility, and rapid data reduction and documentation, are briefly described; and the operational flow is discussed to illustrate the full range of capabilities and the flexibility of application. The successful application of the system to a modal survey of the Skylab payload is described. Information about the Skylab test article, coincident-quadrature analysis of modal response data, orthogonality, and damping calculations is included in the appendixes. Recommendations for future application of the system are also made.
The NASA Redox Storage System Development project, 1980
NASA Technical Reports Server (NTRS)
1982-01-01
The technical accomplishments pertaining to the development of Redox systems and related technology are outlined in terms of the task elements: prototype systems development, application analyses, and supporting technology. Prototype systems development provides for a major procurement to develop an industrial capability to take the current NASA Lewis technology and go on to the design, development, and commercialization of iron-chromium Redox storage systems. Application analyses provides for the definition of application concepts and technology requirements, specific definition studies, and the identification of market sectors and their penetration potential. Supporting technology includes both in house and contractual efforts that encompass implementation of technology improvements in membranes, electrodes, reactant processing, and system design. The status of all elements is discussed.
The NASA Redox Storage System Development project, 1980
NASA Astrophysics Data System (ADS)
1982-12-01
The technical accomplishments pertaining to the development of Redox systems and related technology are outlined in terms of the task elements: prototype systems development, application analyses, and supporting technology. Prototype systems development provides for a major procurement to develop an industrial capability to take the current NASA Lewis technology and go on to the design, development, and commercialization of iron-chromium Redox storage systems. Application analyses provides for the definition of application concepts and technology requirements, specific definition studies, and the identification of market sectors and their penetration potential. Supporting technology includes both in house and contractual efforts that encompass implementation of technology improvements in membranes, electrodes, reactant processing, and system design. The status of all elements is discussed.
NASA Technical Reports Server (NTRS)
Watson, Michael D.; Kelley, Gary W.
2012-01-01
The Department of Defense (DoD) defined System Operational Effectiveness (SOE) model provides an exceptional framework for an affordable approach to the development and operation of space launch vehicles and their supporting infrastructure. The SOE model provides a focal point from which to direct and measure technical effectiveness and process efficiencies of space launch vehicles. The application of the SOE model to a space launch vehicle's development and operation effort leads to very specific approaches and measures that require consideration during the design phase. This paper provides a mapping of the SOE model to the development of space launch vehicles for human exploration by addressing the SOE model key points of measurement including System Performance, System Availability, Technical Effectiveness, Process Efficiency, System Effectiveness, Life Cycle Cost, and Affordable Operational Effectiveness. In addition, the application of the SOE model to the launch vehicle development process is defined providing the unique aspects of space launch vehicle production and operations in lieu of the traditional broader SOE context that examines large quantities of fielded systems. The tailoring and application of the SOE model to space launch vehicles provides some key insights into the operational design drivers, capability phasing, and operational support systems.
Zou, Xianshao; Pan, Tingting; Chen, Lei; Tian, Yanqing; Zhang, Weiwen
2017-09-01
Luminescence including fluorescence and phosphorescence sensors have been demonstrated to be important for studying cell metabolism, and diagnosing diseases and cancer. Various design principles have been employed for the development of sensors in different formats, such as organic molecules, polymers, polymeric hydrogels, and nanoparticles. The integration of the sensing with fluorescence imaging provides valuable tools for biomedical research and applications at not only bulk-cell level but also at single-cell level. In this article, we critically reviewed recent progresses on pH, oxygen, and dual pH and oxygen sensors specifically for their application in microbial cells. In addition, we focused not only on sensor materials with different chemical structures, but also on design and applications of sensors for better understanding cellular metabolism of microbial cells. Finally, we also provided an outlook for future materials design and key challenges in reaching broad applications in microbial cells.
17 CFR 210.4-01 - Form, order, and terminology.
Code of Federal Regulations, 2011 CFR
2011-04-01
... ADVISERS ACT OF 1940, AND ENERGY POLICY AND CONSERVATION ACT OF 1975 Rules of General Application § 210.4..., despite footnote or other disclosures, unless the Commission has otherwise provided. This article and other articles of Regulation S-X provide clarification of certain disclosures which must be included in...
Making the Connection: Disarmament, Development and Economic Conversion. A Resource Guide.
ERIC Educational Resources Information Center
Gold, Howard, Ed.
This nine-part guide provides resources on various topics and issues related disarmament, development, and economic conversion. They include: (1) recent publications (with their tables of contents provided, when applicable); (2) research institutes; (3) non-governmental organizations with primary contacts for information; (4) research and…
Coulombic Models in Chemical Bonding.
ERIC Educational Resources Information Center
Sacks, Lawrence J.
1986-01-01
Describes a bonding theory which provides a framework for the description of a wide range of substances and provides quantitative information of remarkable accuracy with far less computational effort than that required of other approaches. Includes applications, such as calculation of bond energies of two binary hydrides (methane and diborane).…
7 CFR 62.300 - Fees and other costs for service.
Code of Federal Regulations, 2010 CFR
2010-01-01
.... Fees for QSVP services shall be based on the time required to provide service calculated to the nearest quarter hour period, including, but not limited to, official assessment time, travel time, and time... costs. Applicants are responsible for paying actual travel costs incurred to provide QSVP services...
7 CFR 62.300 - Fees and other costs for service.
Code of Federal Regulations, 2014 CFR
2014-01-01
.... Fees for QSVP services shall be based on the time required to provide service calculated to the nearest quarter hour period, including, but not limited to, official assessment time, travel time, and time... costs. Applicants are responsible for paying actual travel costs incurred to provide QSVP services...
7 CFR 62.300 - Fees and other costs for service.
Code of Federal Regulations, 2011 CFR
2011-01-01
.... Fees for QSVP services shall be based on the time required to provide service calculated to the nearest quarter hour period, including, but not limited to, official assessment time, travel time, and time... costs. Applicants are responsible for paying actual travel costs incurred to provide QSVP services...
7 CFR 62.300 - Fees and other costs for service.
Code of Federal Regulations, 2013 CFR
2013-01-01
.... Fees for QSVP services shall be based on the time required to provide service calculated to the nearest quarter hour period, including, but not limited to, official assessment time, travel time, and time... costs. Applicants are responsible for paying actual travel costs incurred to provide QSVP services...
7 CFR 62.300 - Fees and other costs for service.
Code of Federal Regulations, 2012 CFR
2012-01-01
.... Fees for QSVP services shall be based on the time required to provide service calculated to the nearest quarter hour period, including, but not limited to, official assessment time, travel time, and time... costs. Applicants are responsible for paying actual travel costs incurred to provide QSVP services...
Guide to U.S. Department of Education Programs, 2002.
ERIC Educational Resources Information Center
Office of Public Affairs (ED), Washington, DC.
Programs authorized and funded under federal law as well as any applicable competitions made possible by these programs are described in this reference guide. It includes information on funding for laboratories, centers, and other facilities that provide important resources for education. Information is provided on financial assistance offered to…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-25
... member and their income, employment, shelter expenses, medical expenses (if applicable) and resources... percent of the Federal poverty level or when an able-bodied adult without dependents (ABAWD) does not meet... that opt to provide transitional benefits must provide eligible families a TN that includes detailed...
76 FR 69242 - Application for New Awards; College Assistance Migrant Program
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-08
... Program: The purpose of CAMP is to provide academic and financial support to help migrant and seasonal... work study, exposure to academic programs and careers in STEM-related fields, and providing support services. These could include services to improve participants' academic skills and knowledge so that they...
Combustor and combustor screech mitigation methods
Kim, Kwanwoo; Johnson, Thomas Edward; Uhm, Jong Ho; Kraemer, Gilbert Otto
2014-05-27
The present application provides for a combustor for use with a gas turbine engine. The combustor may include a cap member and a number of fuel nozzles extending through the cap member. One or more of the fuel nozzles may be provided in a non-flush position with respect to the cap member.
Statistical Significance vs. Practical Significance: An Exploration through Health Education
ERIC Educational Resources Information Center
Rosen, Brittany L.; DeMaria, Andrea L.
2012-01-01
The purpose of this paper is to examine the differences between statistical and practical significance, including strengths and criticisms of both methods, as well as provide information surrounding the application of various effect sizes and confidence intervals within health education research. Provided are recommendations, explanations and…
Thomas, Kent; Dosemeci, Mustafa; Hoppin, Jane A.; Sheldon, Linda; Croghan, Carry; Gordon, Sydney; Jones, Martin; Reynolds, Stephen; Raymer, James; Akland, Gerald; Lynch, Charles F.; Knott, Charles; Sandler, Dale P.; Blair, Aaron; Alavanja, Michael
2010-01-01
Epidemiologic studies increasingly rely on improved exposure assessments to characterize pesticide exposures in agricultural populations. A subset of private pesticide applicators in the AHS epidemiological cohort was monitored around the time of their agricultural use of 2,4-D and chlorpyrifos to assess exposure levels and potential exposure factors. Measurements included pre- and post-application urine samples, and patch, hand wipe, and personal air samples. Broadcast or hand spray application methods were used by applicators for 2,4-D products. Chlorpyrifos products were applied using spray applications and in-furrow application of granular products. Geometric mean (GM) values for 69 2,4-D applicators were 7.8 and 25 µg/L in pre- and post-application urine, respectively (p < 0.05 for difference); 0.39 mg for estimated hand loading; 2.9 mg for estimated body loading; and 0.37 µg/m3 for concentration in personal air. Significant correlations were found between all media for 2,4-D. GM values for 17 chlorpyrifos applicators were 11 µg/L in both pre- and post-application urine for the 3,5,6-trichloro-2-pyridinol metabolite, 0.28 mg for body loading, and 0.49 µg/m3 for air concentration. Only 53% of the chlorpyrifos applicators had measureable hand loading results; their median hand loading was 0.02 mg. Factors associated with differences in 2,4-D measurements included application method and glove use; and, for hand spray applicators, use of adjuvants, equipment repair, duration of use, and contact with treated vegetation. Spray applications of liquid chlorpyrifos products were associated with higher measurements than in-furrow granular product applications. This study provides information on exposures and possible exposure determinants for several application methods commonly used by farmers in the cohort and will provide information to assess and refine exposure classification in the Agricultural Health Study. Results may also be of use in pesticide safety education for reducing exposures to applied pesticides. PMID:19240759
Design of virus-based nanomaterials for medicine, biotechnology, and energy
Wen, Amy M.; Steinmetz, Nicole F.
2016-01-01
Virus-based nanomaterials are versatile materials that naturally self-assemble and have relevance for a broad range of applications including medicine, biotechnology, and energy. This review provides an overview of recent developments in “chemical virology.” Viruses, as materials, provide unique nanoscale scaffolds that have relevance in chemical biology and nanotechnology, with diverse areas of applications. Some fundamental advantages of viruses, compared to synthetically programmed materials, include the highly precise spatial arrangement of their subunits into a diverse array of shapes and sizes and many available avenues for easy and reproducible modification. Here, we will first survey the broad distribution of viruses and various methods for producing virus-based nanoparticles, as well as engineering principles used to impart new functionalities. We will then examine the broad range of applications and implications of virus-based materials, focusing on the medical, biotechnology, and energy sectors. We anticipate that this field will continue to evolve and grow, with exciting new possibilities stemming from advancements in the rational design of virus-based nanomaterials. PMID:27152673
Daniele, Michael A; Boyd, Darryl A; Adams, André A; Ligler, Frances S
2015-01-07
Fiber-based materials provide critical capabilities for biomedical applications. Microfluidic fiber fabrication has recently emerged as a very promising route to the synthesis of polymeric fibers at the micro and nanoscale, providing fine control over fiber shape, size, chemical anisotropy, and biological activity. This Progress Report summarizes advanced microfluidic methods for the fabrication of both microscale and nanoscale fibers and illustrates how different methods are enabling new biomedical applications. Microfluidic fabrication methods and resultant materials are explained from the perspective of their microfluidic device principles, including co-flow, cross-flow, and flow-shaping designs. It is then detailed how the microchannel design and flow parameters influence the variety of synthesis chemistries that can be utilized. Finally, the integration of biomaterials and microfluidic strategies is discussed to manufacture unique fiber-based systems, including cell scaffolds, cell encapsulation, and woven tissue matrices. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
2013-01-01
Much is known about the immediate and predictive antecedents of smoking lapse, which include situations (e.g., presence of other smokers), activities (e.g., alcohol consumption), and contexts (e.g., outside). This commentary suggests smartphone-based systems could be used to infer these predictive antecedents in real time and provide the smoker with just-in-time intervention. The smartphone of today is equipped with an array of sensors, including GPS, cameras, light sensors, barometers, accelerometers, and so forth, that provide information regarding physical location, human movement, ambient sounds, and visual imagery. We propose that libraries of algorithms to infer these antecedents can be developed and then incorporated into diverse mobile research and personalized treatment applications. While a number of challenges to the development and implementation of such applications are recognized, our field benefits from a database of known antecedents to a problem behavior, and further research and development in this exciting area are warranted. PMID:23703731
Overview of the Meso-NH model version 5.4 and its applications
NASA Astrophysics Data System (ADS)
Lac, Christine; Chaboureau, Jean-Pierre; Masson, Valéry; Pinty, Jean-Pierre; Tulet, Pierre; Escobar, Juan; Leriche, Maud; Barthe, Christelle; Aouizerats, Benjamin; Augros, Clotilde; Aumond, Pierre; Auguste, Franck; Bechtold, Peter; Berthet, Sarah; Bielli, Soline; Bosseur, Frédéric; Caumont, Olivier; Cohard, Jean-Martial; Colin, Jeanne; Couvreux, Fleur; Cuxart, Joan; Delautier, Gaëlle; Dauhut, Thibaut; Ducrocq, Véronique; Filippi, Jean-Baptiste; Gazen, Didier; Geoffroy, Olivier; Gheusi, François; Honnert, Rachel; Lafore, Jean-Philippe; Lebeaupin Brossier, Cindy; Libois, Quentin; Lunet, Thibaut; Mari, Céline; Maric, Tomislav; Mascart, Patrick; Mogé, Maxime; Molinié, Gilles; Nuissier, Olivier; Pantillon, Florian; Peyrillé, Philippe; Pergaud, Julien; Perraud, Emilie; Pianezze, Joris; Redelsperger, Jean-Luc; Ricard, Didier; Richard, Evelyne; Riette, Sébastien; Rodier, Quentin; Schoetter, Robert; Seyfried, Léo; Stein, Joël; Suhre, Karsten; Taufour, Marie; Thouron, Odile; Turner, Sandra; Verrelle, Antoine; Vié, Benoît; Visentin, Florian; Vionnet, Vincent; Wautelet, Philippe
2018-05-01
This paper presents the Meso-NH model version 5.4. Meso-NH is an atmospheric non hydrostatic research model that is applied to a broad range of resolutions, from synoptic to turbulent scales, and is designed for studies of physics and chemistry. It is a limited-area model employing advanced numerical techniques, including monotonic advection schemes for scalar transport and fourth-order centered or odd-order WENO advection schemes for momentum. The model includes state-of-the-art physics parameterization schemes that are important to represent convective-scale phenomena and turbulent eddies, as well as flows at larger scales. In addition, Meso-NH has been expanded to provide capabilities for a range of Earth system prediction applications such as chemistry and aerosols, electricity and lightning, hydrology, wildland fires, volcanic eruptions, and cyclones with ocean coupling. Here, we present the main innovations to the dynamics and physics of the code since the pioneer paper of Lafore et al. (1998) and provide an overview of recent applications and couplings.
NASA Astrophysics Data System (ADS)
Miner, Nadine Elizabeth
1998-09-01
This dissertation presents a new wavelet-based method for synthesizing perceptually convincing, dynamic sounds using parameterized sound models. The sound synthesis method is applicable to a variety of applications including Virtual Reality (VR), multi-media, entertainment, and the World Wide Web (WWW). A unique contribution of this research is the modeling of the stochastic, or non-pitched, sound components. This stochastic-based modeling approach leads to perceptually compelling sound synthesis. Two preliminary studies conducted provide data on multi-sensory interaction and audio-visual synchronization timing. These results contributed to the design of the new sound synthesis method. The method uses a four-phase development process, including analysis, parameterization, synthesis and validation, to create the wavelet-based sound models. A patent is pending for this dynamic sound synthesis method, which provides perceptually-realistic, real-time sound generation. This dissertation also presents a battery of perceptual experiments developed to verify the sound synthesis results. These experiments are applicable for validation of any sound synthesis technique.
McClernon, F Joseph; Roy Choudhury, Romit
2013-10-01
Much is known about the immediate and predictive antecedents of smoking lapse, which include situations (e.g., presence of other smokers), activities (e.g., alcohol consumption), and contexts (e.g., outside). This commentary suggests smartphone-based systems could be used to infer these predictive antecedents in real time and provide the smoker with just-in-time intervention. The smartphone of today is equipped with an array of sensors, including GPS, cameras, light sensors, barometers, accelerometers, and so forth, that provide information regarding physical location, human movement, ambient sounds, and visual imagery. We propose that libraries of algorithms to infer these antecedents can be developed and then incorporated into diverse mobile research and personalized treatment applications. While a number of challenges to the development and implementation of such applications are recognized, our field benefits from a database of known antecedents to a problem behavior, and further research and development in this exciting area are warranted.
Characterization of a Two-Stage Pulse Tube Cooler for Space Applications
NASA Astrophysics Data System (ADS)
Orsini, R.; Nguyen, T.; Colbert, R.; Raab, J.
2010-04-01
A two-stage long-life, low mass and efficient pulse tube cooler for space applications has been developed and acceptance tested for flight applications. This paper presents the data collected on four flight coolers during acceptance testing. Flight acceptance test of these cryocoolers includes thermal performance mapping over a range of reject temperatures, launch vibration testing and thermal cycling testing. Designed conservatively for a 10-year life, the coolers are required to provide simultaneous cooling powers at 95 K and 180 K while rejecting to 300 K with less than 187 W input power to the electronics. The total mass of each cooler and electronics system is 8.7 kg. The radiation-hardened and software driven control electronics provides cooler control functions which are fully re-configurable in orbit. These functions include precision temperature control to better than 100 mK p-p. This 2 stage cooler has heritage to the 12 Northrop Grumman Aerospace Systems (NGAS) coolers currently on orbit with 2 operating for more than 11.5 years.
The application of similar image retrieval in electronic commerce.
Hu, YuPing; Yin, Hua; Han, Dezhi; Yu, Fei
2014-01-01
Traditional online shopping platform (OSP), which searches product information by keywords, faces three problems: indirect search mode, large search space, and inaccuracy in search results. For solving these problems, we discuss and research the application of similar image retrieval in electronic commerce. Aiming at improving the network customers' experience and providing merchants with the accuracy of advertising, we design a reasonable and extensive electronic commerce application system, which includes three subsystems: image search display subsystem, image search subsystem, and product information collecting subsystem. This system can provide seamless connection between information platform and OSP, on which consumers can automatically and directly search similar images according to the pictures from information platform. At the same time, it can be used to provide accuracy of internet marketing for enterprises. The experiment shows the efficiency of constructing the system.
The Application of Similar Image Retrieval in Electronic Commerce
Hu, YuPing; Yin, Hua; Han, Dezhi; Yu, Fei
2014-01-01
Traditional online shopping platform (OSP), which searches product information by keywords, faces three problems: indirect search mode, large search space, and inaccuracy in search results. For solving these problems, we discuss and research the application of similar image retrieval in electronic commerce. Aiming at improving the network customers' experience and providing merchants with the accuracy of advertising, we design a reasonable and extensive electronic commerce application system, which includes three subsystems: image search display subsystem, image search subsystem, and product information collecting subsystem. This system can provide seamless connection between information platform and OSP, on which consumers can automatically and directly search similar images according to the pictures from information platform. At the same time, it can be used to provide accuracy of internet marketing for enterprises. The experiment shows the efficiency of constructing the system. PMID:24883411
C Language Integrated Production System, Ada Version
NASA Technical Reports Server (NTRS)
Culbert, Chris; Riley, Gary; Savely, Robert T.; Melebeck, Clovis J.; White, Wesley A.; Mcgregor, Terry L.; Ferguson, Melisa; Razavipour, Reza
1992-01-01
CLIPS/Ada provides capabilities of CLIPS v4.3 but uses Ada as source language for CLIPS executable code. Implements forward-chaining rule-based language. Program contains inference engine and language syntax providing framework for construction of expert-system program. Also includes features for debugging application program. Based on Rete algorithm which provides efficient method for performing repeated matching of patterns. Written in Ada.
Optical Air Flow Measurements in Flight
NASA Technical Reports Server (NTRS)
Bogue, Rodney K.; Jentink, Henk W.
2004-01-01
This document has been written to assist the flight-test engineer and researcher in using optical flow measurements in flight applications. The emphasis is on describing tradeoffs in system design to provide desired measurement performance as currently understood. Optical system components are discussed with examples that illustrate the issues. The document concludes with descriptions of optical measurement systems designed for a variety of applications including aeronautics research, airspeed measurement, and turbulence hazard detection. Theoretical discussion is minimized, but numerous references are provided to supply ample opportunity for the reader to understand the theoretical underpinning of optical concepts.
Clay, Patrick; Vaught, Eric; Glaros, Alan; Mangum, Stacy; Hansen, Daniel; Lindsey, Cameron
2007-01-01
Prescription assistance programs (PAPs) are offered by pharmaceutical manufacturers to provide medications at no out-of-pocket cost to various categories of medically indigent patients. some PAPs require only 1 application whereas others require as many as 4 applications per year per drug per patient, depending on the manufacturer's requirements. to measure the costs incurred by a medical clinic that provides chronic prescription medications via PAPs. this project was conducted in a free-standing, inner-city, Midwestern health clinic on the PAP application process for 1 representative drug for 32 pharmaceutical manufacturers that offered PAPs for drugs taken on a long-term basis for chronic conditions. time and motion studies were conducted using a medical assistant with the greatest amount of PAP experience. Assessment of time-to-access and time-to-complete forms was performed outside of normal clinic business hours to avoid interruptions. Personnel time costs also included receipt and delivery of drug to the patient (drug distribution time), which were assessed during normal business hours for actual medications received for 10 patients and included the time required to notify the patient of the arrival of the drug and to dispense the medication to the patient. supply costs for this PAP service included printing and copying costs. submission costs associated with mailing or faxing the documents were determined and calculated using the price of materials only. total application cost was calculated by adding the personnel time cost, supply cost, and submission cost. Annual PAP time was the time spent completing PAPs for 1 medication for 1 patient for 1 year. the time and resources required and the associated costs were aggregated separately for the pharmaceutical manufacturers that required 1, 2, or 4 applications per drug per patient per year. The total average application cost for all 32 companies was $25.18 [SD, $17.23]. Personnel time costs accounted for half or more of the total application cost, regardless of submission mode. the time to complete the form for any PAP was 0:06:20 [SD, 0:05:03] minutes with a range from 0:03:01 to 0:34:22 minutes. Printing costs were $0.20 [SD, $0.10] and copying costs were $1.96 [SD, $0.21]. Average supply costs were $2.16 [SD, $0.23]. Faxing versus mailing PAPs saved $17.90 per application. total annual clinic cost to assist patients in obtaining drugs through a PAP ranged from $10.42 per patient for a drug that requires 1 application per year (15 manufacturers, 47%) to $46.30 per patient for a drug in a PAP that requires 4 (re)applications per year (12 manufacturers, 38%). PAPs transmitted by mail required 0:49:18 [SD, 0:32:18] minutes, approximately 0:25:00 [SD, 0:21:00] minutes more than by fax (0:24:13 [SD, 0:11:32] minutes) or by Internet submissions (0:28:20 minutes), respectively. The number of PAP applications required per patient per medication annually has the greatest impact on clinic time and financial resources. Application submission method also influences the overall costs of providing this service in the clinical setting. Medical clinics should base their decision to provide a PAP application service to patients on the time and costs associated over the course of 1 year and not on the 1-time application cost.
Budget-based power consumption for application execution on a plurality of compute nodes
Archer, Charles J; Blocksome, Michael A; Peters, Amanda E; Ratterman, Joseph D; Smith, Brian E
2013-02-05
Methods, apparatus, and products are disclosed for budget-based power consumption for application execution on a plurality of compute nodes that include: assigning an execution priority to each of one or more applications; executing, on the plurality of compute nodes, the applications according to the execution priorities assigned to the applications at an initial power level provided to the compute nodes until a predetermined power consumption threshold is reached; and applying, upon reaching the predetermined power consumption threshold, one or more power conservation actions to reduce power consumption of the plurality of compute nodes during execution of the applications.
Budget-based power consumption for application execution on a plurality of compute nodes
Archer, Charles J; Inglett, Todd A; Ratterman, Joseph D
2012-10-23
Methods, apparatus, and products are disclosed for budget-based power consumption for application execution on a plurality of compute nodes that include: assigning an execution priority to each of one or more applications; executing, on the plurality of compute nodes, the applications according to the execution priorities assigned to the applications at an initial power level provided to the compute nodes until a predetermined power consumption threshold is reached; and applying, upon reaching the predetermined power consumption threshold, one or more power conservation actions to reduce power consumption of the plurality of compute nodes during execution of the applications.
Holey fibers for low bend loss
NASA Astrophysics Data System (ADS)
Nakajima, Kazuhide; Saito, Kotaro; Yamada, Yusuke; Kurokawa, Kenji; Shimizu, Tomoya; Fukai, Chisato; Matsui, Takashi
2013-12-01
Bending-loss insensitive fiber (BIF) has proved an essential medium for constructing the current fiber to the home (FTTH) network. By contrast, the progress that has been made on holey fiber (HF) technologies provides us with novel possibilities including non-telecom applications. In this paper, we review recent progress on hole-assisted type BIF. A simple design consideration is overviewed. We then describe some of the properties of HAF including its mechanical reliability. Finally, we introduce some applications of HAF including to high power transmission. We show that HAF with a low bending loss has the potential for use in various future optical technologies as well as in the optical communication network.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ronnebro, Ewa; Stetson, Ned
he focus of this report is TRL/MRL analysis of hydrogen storage; it documents the methodology and results of an effort to identify hydrogen storage technologies’ technical and manufacturing readiness for early market motive and non-motive applications and to provide a path forward toward commercialization. Motive applications include materials handling equipment (MHE) and ground support equipment (GSE), such as forklifts, tow tractors, and specialty vehicles such as golf carts, lawn mowers and wheel chairs. Non-motive applications are portable, stationary or auxiliary power units (APUs) and include portable laptops, backup power, remote sensor power, and auxiliary power for recreational vehicles, hotels, hospitals,more » etc. Hydrogen storage technologies assessed include metal hydrides, chemical hydrides, sorbents, gaseous storage, and liquid storage. The assessments are based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies at varying levels of development. The manufacturing status could be established from eight risk elements: Technical Maturity, Design, Materials, Cost & Funding, Process Capability, Personnel, Facilities and Manufacturing Planning. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. This technology readiness assessment (TRA) report documents the process used to conduct the TRA/MRA (technology and manufacturing readiness assessment), reports the TRL and MRL for each assessed technology and provides recommendations based on the findings. To investigate the state of the art and needs to mature the technologies, PNNL prepared a questionnaire to assign TRL and MRL for each hydrogen storage technology. The questionnaire was sent to identified hydrogen storage technology developers and manufacturers who were asked to perform a self-assessment. We included both domestic and international organizations including U.S. national laboratories, U.S. companies, European companies and Japanese companies. PNNL collected the data and performed an analysis to deduce the level of maturity and to provide program recommendations.« less
Tuneable photonic device including an array of metamaterial resonators
Brener, Igal; Wanke, Michael; Benz, Alexander
2017-03-14
A photonic apparatus includes a metamaterial resonator array overlying and electromagnetically coupled to a vertically stacked plurality of quantum wells defined in a semiconductor body. An arrangement of electrical contact layers is provided for facilitating the application of a bias voltage across the quantum well stack. Those portions of the semiconductor body that lie between the electrical contact layers are conformed to provide an electrically conductive path between the contact layers and through the quantum well stack.
Clean Diesel Grant The Rhode Island Clean Diesel Fund provides companies with reimbursement grants receiving the grant. For more information, including eligibility and application requirements, see the Rhode
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-01
..., probation, parole, and military court-martial to the past 7 years vice 10 in order to align this collection... applicant provide personal identifying data, including past convictions, imprisonments, probations, paroles... but will consider including this question in future revisions to the investigative questionnaire for...
Preschools Under the Fair Labor Standards Act, July 1972.
ERIC Educational Resources Information Center
Employment Standards Administration (DOL), Washington, DC. Wage and Hour Div.
This pamphlet provides general information concerning the application of the Fair Labor Standards Act to employees of preschool centers. Included is a discussion of: (1) Basic Monetary Requirements, including minimum wages and facilities furnished to the preschool employees, (2) Equal Pay Provisions, (3) Overtime, (4) Hours Worked, (5) Exemptions,…
12 CFR 1291.5 - Competitive application program.
Code of Federal Regulations, 2014 CFR
2014-01-01
... (excluding the value of sweat equity), provided that the project's uses of funds also include or exclude... project. Cash costs do not include in-kind donations, voluntary professional labor or services, or sweat... services (excluding the value of sweat equity) committed to the project as part of the total development...
12 CFR 1291.5 - Competitive application program.
Code of Federal Regulations, 2012 CFR
2012-01-01
... (excluding the value of sweat equity), provided that the project's uses of funds also include or exclude... project. Cash costs do not include in-kind donations, voluntary professional labor or services, or sweat... services (excluding the value of sweat equity) committed to the project as part of the total development...
12 CFR 1291.5 - Competitive application program.
Code of Federal Regulations, 2011 CFR
2011-01-01
... (excluding the value of sweat equity), provided that the project's uses of funds also include or exclude... project. Cash costs do not include in-kind donations, voluntary professional labor or services, or sweat... services (excluding the value of sweat equity) committed to the project as part of the total development...
12 CFR 1291.5 - Competitive application program.
Code of Federal Regulations, 2013 CFR
2013-01-01
... (excluding the value of sweat equity), provided that the project's uses of funds also include or exclude... project. Cash costs do not include in-kind donations, voluntary professional labor or services, or sweat... services (excluding the value of sweat equity) committed to the project as part of the total development...
48 CFR 307.7108 - Statement of work.
Code of Federal Regulations, 2010 CFR
2010-10-01
... projects frequently lie well beyond the present state of the art and entail procedures and techniques of... for guidance on preparation of a PWS. An SOW may include tasks and subtasks. The degree of breakout... degree of expertise. (6) Special requirements (as applicable). This includes providing, in a separate...
Heat pipe technology. A bibliography with abstracts
NASA Technical Reports Server (NTRS)
1978-01-01
This bibliography cites 55 publications on the theory, design, development, fabrication, and testing of heat pipes. Applications covered include solar, nuclear, and thermoelectric energy conversion. A book (in Russian) on low temperature heat pipes is included as well as abstracts when available. Indexes provided list authors, titles/keywords (permuted) and patents.
34 CFR 602.17 - Application of standards in reaching an accrediting decision.
Code of Federal Regulations, 2012 CFR
2012-07-01
... program to prepare, following guidance provided by the agency, an in-depth self-study that includes the... on-site review; (e) Conducts its own analysis of the self-study and supporting documentation... standards, including areas needing improvement; and (2) The institution's or program's performance with...
34 CFR 602.17 - Application of standards in reaching an accrediting decision.
Code of Federal Regulations, 2013 CFR
2013-07-01
... program to prepare, following guidance provided by the agency, an in-depth self-study that includes the... on-site review; (e) Conducts its own analysis of the self-study and supporting documentation... standards, including areas needing improvement; and (2) The institution's or program's performance with...
34 CFR 602.17 - Application of standards in reaching an accrediting decision.
Code of Federal Regulations, 2011 CFR
2011-07-01
... program to prepare, following guidance provided by the agency, an in-depth self-study that includes the... on-site review; (e) Conducts its own analysis of the self-study and supporting documentation... standards, including areas needing improvement; and (2) The institution's or program's performance with...
34 CFR 602.17 - Application of standards in reaching an accrediting decision.
Code of Federal Regulations, 2014 CFR
2014-07-01
... program to prepare, following guidance provided by the agency, an in-depth self-study that includes the... on-site review; (e) Conducts its own analysis of the self-study and supporting documentation... standards, including areas needing improvement; and (2) The institution's or program's performance with...
New Technology, New Questions: Using an Internet Database in Chemistry.
ERIC Educational Resources Information Center
Hayward, Roger
1996-01-01
Describes chemistry software that is part of a balanced educational program. Provides several applications including graphs of various relationships among the elements. Includes a brief historical treatment of the periodic table and compares the traditional historical approach with perspectives gained by manipulating an electronic database. (DDR)
Ali, Akbar; Ahmed, Shakeel
2018-06-26
The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.
Applications of self-organizing neural networks in virtual screening and diversity selection.
Selzer, Paul; Ertl, Peter
2006-01-01
Artificial neural networks provide a powerful technique for the analysis and modeling of nonlinear relationships between molecular structures and pharmacological activity. Many network types, including Kohonen and counterpropagation, also provide an intuitive method for the visual assessment of correspondence between the input and output data. This work shows how a combination of neural networks and radial distribution function molecular descriptors can be applied in various areas of industrial pharmaceutical research. These applications include the prediction of biological activity, the selection of screening candidates (cherry picking), and the extraction of representative subsets from large compound collections such as combinatorial libraries. The methods described have also been implemented as an easy-to-use Web tool, allowing chemists to perform interactive neural network experiments on the Novartis intranet.
Evaluation of NASA Data Products for RPO Applications
NASA Technical Reports Server (NTRS)
Frisbie, Troy; Knowlton, Kelly; Andrews, Jane
2005-01-01
This presentation summarizes preliminary investigations at SSC by NASA's ASD in Air Quality including decision support tools, partner plans, working groups, and committees. An overview of follow-on short-term and long-term objectives is also provided. A table of potential NASA sensors for use with air quality applications is included, along with specifications for MODIS 04 and 06 products. This presentation was originally given by Rich Piorot of the Vermont Department of Environmental Conservation - Air Quality as part of a round-table discussion during "Exploring Collaborative Opportunities in Air Quality Monitoring, Modelling and Communication Workshop" in Boulder, CO, on March 21-22, 2005; verbal consent for this presentation to be provided to Mr. Piorot was given by the NASA SSC ASD Air Quality Program Manager on March 14, 2005.
Injectable scaffolds: Preparation and application in dental and craniofacial regeneration
Chang, Bei; Ahuja, Neelam; Ma, Chi; Liu, Xiaohua
2016-01-01
Injectable scaffolds are appealing for tissue regeneration because they offer many advantages over pre-formed scaffolds. This article provides a comprehensive review of the injectable scaffolds currently being investigated for dental and craniofacial tissue regeneration. First, we provide an overview of injectable scaffolding materials, including natural, synthetic, and composite biomaterials. Next, we discuss a variety of characteristic parameters and gelation mechanisms of the injectable scaffolds. The advanced injectable scaffolding systems developed in recent years are then illustrated. Furthermore, we summarize the applications of the injectable scaffolds for the regeneration of dental and craniofacial tissues that include pulp, dentin, periodontal ligament, temporomandibular joint, and alveolar bone. Finally, our perspectives on the injectable scaffolds for dental and craniofacial tissue regeneration are offered as signposts for the future advancement of this field. PMID:28649171
Microgravity science and applications bibliography, 1987 revision
NASA Technical Reports Server (NTRS)
1988-01-01
This edition of the Microgravity Science and Applications (MSA) Bibliography is a compilation of Government reports, contractor reports, conference proceedings, and journal articles dealing with flight experiments utilizing a low gravity environment to elucidate and control various processes or with ground based activities that provide supporting research. It encompasses literature published but not cited in the 1984 Revision and literature which has been published in the past year. Subdivisions of the bibliography include six major categories: Electronic Materials; Metals, Alloys, and Composites; Fluid Dynamics and Transport; Biotechnology; Glass and Ceramics; and Combustion. Also included are publications from the European, Soviet, and Japanese MSA programs. In addition, there is a list of patents and appendices providing a compilation of an anonymously authored collection of reports and a cross reference index.
Microgravity science and applications bibliography, 1985 revision
NASA Technical Reports Server (NTRS)
Pentecost, E. (Compiler)
1985-01-01
This edition of the Microgravity Science and Applications (MSA) Bibliography is a compilation of Government reports, contractor reports, conference proceedings, and journal articles dealing with flight experiments utilizing a low-gravity environment to elucidate and control various processes or with ground-based activities that provide supporting research. It encompasses literature published but not cited in the 1984 Revision and that literature which has been published in the past year. Subdivisions of the bibliography include six major categories: Electronic Materials; Metal, Alloys, and Composites; Fluid Dynamics and Transports; Biotechnology; Glass and Ceramics; and Combustion. Also included are publications from the European, Soviet, and Japanese MSA programs. In addition, there is a list of patents and appendices providing a compilation of anonymously authored collection of reports and a cross reference index.
Air traffic management evaluation tool
NASA Technical Reports Server (NTRS)
Sheth, Kapil S. (Inventor); Sridhar, Banavar (Inventor); Bilimoria, Karl D. (Inventor); Grabbe, Shon (Inventor); Chatterji, Gano Broto (Inventor); Schipper, John F. (Inventor)
2010-01-01
Method and system for evaluating and implementing air traffic management tools and approaches for managing and avoiding an air traffic incident before the incident occurs. The invention provides flight plan routing and direct routing or wind optimal routing, using great circle navigation and spherical Earth geometry. The invention provides for aircraft dynamics effects, such as wind effects at each altitude, altitude changes, airspeed changes and aircraft turns to provide predictions of aircraft trajectory (and, optionally, aircraft fuel use). A second system provides several aviation applications using the first system. These applications include conflict detection and resolution, miles-in trail or minutes-in-trail aircraft separation, flight arrival management, flight re-routing, weather prediction and analysis and interpolation of weather variables based upon sparse measurements.
Laadan, Oren; Nieh, Jason; Phung, Dan
2012-10-02
Methods, media and systems for managing a distributed application running in a plurality of digital processing devices are provided. In some embodiments, a method includes running one or more processes associated with the distributed application in virtualized operating system environments on a plurality of digital processing devices, suspending the one or more processes, and saving network state information relating to network connections among the one or more processes. The method further include storing process information relating to the one or more processes, recreating the network connections using the saved network state information, and restarting the one or more processes using the stored process information.
Proposal for grid computing for nuclear applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Idris, Faridah Mohamad; Ismail, Saaidi; Haris, Mohd Fauzi B.
2014-02-12
The use of computer clusters for computational sciences including computational physics is vital as it provides computing power to crunch big numbers at a faster rate. In compute intensive applications that requires high resolution such as Monte Carlo simulation, the use of computer clusters in a grid form that supplies computational power to any nodes within the grid that needs computing power, has now become a necessity. In this paper, we described how the clusters running on a specific application could use resources within the grid, to run the applications to speed up the computing process.
Evaluation and selection of refrigeration systems for lunar surface and space applications
NASA Technical Reports Server (NTRS)
Copeland, R. J.; Blount, T. D.; Williams, J. L.
1971-01-01
Evaluated are the various refrigeration machines which could be used to provide heat rejection in environmental control systems for lunar surface and spacecraft applications, in order to select the best refrigeration machine for satisfying each individual application and the best refrigeration machine for satisfying all of the applications. The refrigeration machine considered include: (1) vapor comparison cycle (work-driven); (2) vapor adsorption cycle (heat-driven); (3) vapor absorption cycle (heat-driven); (4) thermoelectric (electrically-driven); (5) gas cycle (work driven); (6) steam-jet (heat-driven).
Alginate: properties and biomedical applications
Lee, Kuen Yong; Mooney, David J.
2011-01-01
Alginate is a biomaterial that has found numerous applications in biomedical science and engineering due to its favorable properties, including biocompatibility and ease of gelation. Alginate hydrogels have been particularly attractive in wound healing, drug delivery, and tissue engineering applications to date, as these gels retain structural similarity to the extracellular matrices in tissues and can be manipulated to play several critical roles. This review will provide a comprehensive overview of general properties of alginate and its hydrogels, their biomedical applications, and suggest new perspectives for future studies with these polymers. PMID:22125349
Applications of artificial neural networks (ANNs) in food science.
Huang, Yiqun; Kangas, Lars J; Rasco, Barbara A
2007-01-01
Artificial neural networks (ANNs) have been applied in almost every aspect of food science over the past two decades, although most applications are in the development stage. ANNs are useful tools for food safety and quality analyses, which include modeling of microbial growth and from this predicting food safety, interpreting spectroscopic data, and predicting physical, chemical, functional and sensory properties of various food products during processing and distribution. ANNs hold a great deal of promise for modeling complex tasks in process control and simulation and in applications of machine perception including machine vision and electronic nose for food safety and quality control. This review discusses the basic theory of the ANN technology and its applications in food science, providing food scientists and the research community an overview of the current research and future trend of the applications of ANN technology in the field.
Molecular-based design and emerging applications of nanoporous carbon spheres
NASA Astrophysics Data System (ADS)
Liu, Jian; Wickramaratne, Nilantha P.; Qiao, Shi Zhang; Jaroniec, Mietek
2015-08-01
Over the past decade, considerable progress has been made in the synthesis and applications of nanoporous carbon spheres ranging in size from nanometres to micrometres. This Review presents the primary techniques for preparing nanoporous carbon spheres and the seminal research that has inspired their development, presented potential applications and uncovered future challenges. First we provide an overview of the synthesis techniques, including the Stöber method and those based on templating, self-assembly, emulsion and hydrothermal carbonization, with special emphasis on the design and functionalization of nanoporous carbon spheres at the molecular level. Next, we cover the key applications of these spheres, including adsorption, catalysis, separation, energy storage and biomedicine -- all of which might benefit from the regular geometry, good liquidity, tunable porosity and controllable particle-size distribution offered by nanoporous carbon spheres. Finally, we present the current challenges and opportunities in the development and commercial applications of nanoporous carbon spheres.
Molecular-based design and emerging applications of nanoporous carbon spheres.
Liu, Jian; Wickramaratne, Nilantha P; Qiao, Shi Zhang; Jaroniec, Mietek
2015-08-01
Over the past decade, considerable progress has been made in the synthesis and applications of nanoporous carbon spheres ranging in size from nanometres to micrometres. This Review presents the primary techniques for preparing nanoporous carbon spheres and the seminal research that has inspired their development, presented potential applications and uncovered future challenges. First we provide an overview of the synthesis techniques, including the Stöber method and those based on templating, self-assembly, emulsion and hydrothermal carbonization, with special emphasis on the design and functionalization of nanoporous carbon spheres at the molecular level. Next, we cover the key applications of these spheres, including adsorption, catalysis, separation, energy storage and biomedicine — all of which might benefit from the regular geometry, good liquidity, tunable porosity and controllable particle-size distribution offered by nanoporous carbon spheres. Finally, we present the current challenges and opportunities in the development and commercial applications of nanoporous carbon spheres.
DOE Fire Protection Handbook, Volume I
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
The Department of Energy (DOE) Fire Protection Program is delineated in a number of source documents including; the Code of Federal Regulations (CFR), DOE Policy Statements and Orders, DOE and national consensus standards (such as those promulgated by the National Fire Protection Association), and supplementary guidance, This Handbook is intended to bring together in one location as much of this material as possible to facilitate understanding and ease of use. The applicability of any of these directives to individual Maintenance and Operating Contractors or to given facilities and operations is governed by existing contracts. Questions regarding applicability should be directedmore » to the DOE Authority Having Jurisdiction for fire safety. The information provided within includes copies of those DOE directives that are directly applicable to the implementation of a comprehensive fire protection program. They are delineated in the Table of Contents. The items marked with an asterisk (*) are included on the disks in WordPerfect 5.1 format, with the filename noted below. The items marked with double asterisks are provided as hard copies as well as on the disk. For those using MAC disks, the files are in Wordperfect 2.1 for MAC.« less
A Study of Quality of Service Communication for High-Speed Packet-Switching Computer Sub-Networks
NASA Technical Reports Server (NTRS)
Cui, Zhenqian
1999-01-01
With the development of high-speed networking technology, computer networks, including local-area networks (LANs), wide-area networks (WANs) and the Internet, are extending their traditional roles of carrying computer data. They are being used for Internet telephony, multimedia applications such as conferencing and video on demand, distributed simulations, and other real-time applications. LANs are even used for distributed real-time process control and computing as a cost-effective approach. Differing from traditional data transfer, these new classes of high-speed network applications (video, audio, real-time process control, and others) are delay sensitive. The usefulness of data depends not only on the correctness of received data, but also the time that data are received. In other words, these new classes of applications require networks to provide guaranteed services or quality of service (QoS). Quality of service can be defined by a set of parameters and reflects a user's expectation about the underlying network's behavior. Traditionally, distinct services are provided by different kinds of networks. Voice services are provided by telephone networks, video services are provided by cable networks, and data transfer services are provided by computer networks. A single network providing different services is called an integrated-services network.
NASA Astrophysics Data System (ADS)
Swamy, Ashwin Balegar
This thesis involves development of an interactive GIS (Geographic Information System) based application, which gives information about the ancient history of Egypt. The astonishing architecture, the strange burial rituals and their civilization were some of the intriguing questions that motivated me towards developing this application. The application is a historical timeline starting from 3100 BC, leading up to 664 BC, focusing on the evolution of the Egyptian dynasties. The tool holds information regarding some of the famous monuments which were constructed during that era and also about the civilizations that co-existed. It also provides details about the religions followed by their kings. It also includes the languages spoken during those periods. The tool is developed using JAVA, a programing language and MOJO (Map Objects Java Objects) a product of ESRI (Environmental Science Research Institute) to create map objects, to provide geographic information. JAVA Swing is used for designing the user interface. HTML (Hyper Text Markup Language) pages are created to provide the user with more information related to the historic period. CSS (Cascade Style Sheets) and JAVA Scripts are used with HTML5 to achieve creative display of content. The tool is kept simple and easy for the user to interact with. The tool also includes pictures and videos for the user to get a feel of the historic period. The application is built to motivate people to know more about one of the prominent and ancient civilization of the Mediterranean world.
Tenth Biennial Coherent Laser Radar Technology and Applications Conference
NASA Technical Reports Server (NTRS)
Kavaya, Michael J. (Compiler)
1999-01-01
The tenth conference on coherent laser radar technology and applications is the latest in a series beginning in 1980 which provides a forum for exchange of information on recent events current status, and future directions of coherent laser radar (or lidar or lader) technology and applications. This conference emphasizes the latest advancement in the coherent laser radar field, including theory, modeling, components, systems, instrumentation, measurements, calibration, data processing techniques, operational uses, and comparisons with other remote sensing technologies.
Applications of optical holography to applied mechanics.
NASA Technical Reports Server (NTRS)
Aprahamian, R.
1972-01-01
This paper provides a brief summary of applications of optical holography and holographic interferometry to applied solid mechanics. Basic equations commonly used in fringe interpretation are described and used to reduce the data contained on holographic interferograms. A comparison of data obtained holographically with analytical prediction is given wherever possible. Applications contained herein include front surface physics, study of bomb breakup, transverse wave propagation, study of mode shapes of panels at elevated temperatures, nondestructive testing, and vibration analysis.
NASA printing, duplicating, and copying management handbook
NASA Technical Reports Server (NTRS)
1993-01-01
This handbook provides information and procedures for the implementation of NASA policy and applicable laws and regulations relating to printing, duplicating, and copying. The topics addressed include a description of relevant laws and regulations, authorizations required, and responsible entities for NASA printing, duplicating, and copying. The policy of NASA is to ensure understanding and application of authority and responsibility on printing matters. Where necessary, the handbook clarifies the intent of basic laws and regulations applicable to NASA.
Restricted access processor - An application of computer security technology
NASA Technical Reports Server (NTRS)
Mcmahon, E. M.
1985-01-01
This paper describes a security guard device that is currently being developed by Computer Sciences Corporation (CSC). The methods used to provide assurance that the system meets its security requirements include the system architecture, a system security evaluation, and the application of formal and informal verification techniques. The combination of state-of-the-art technology and the incorporation of new verification procedures results in a demonstration of the feasibility of computer security technology for operational applications.
Imaging Strategies for Tissue Engineering Applications
Nam, Seung Yun; Ricles, Laura M.; Suggs, Laura J.
2015-01-01
Tissue engineering has evolved with multifaceted research being conducted using advanced technologies, and it is progressing toward clinical applications. As tissue engineering technology significantly advances, it proceeds toward increasing sophistication, including nanoscale strategies for material construction and synergetic methods for combining with cells, growth factors, or other macromolecules. Therefore, to assess advanced tissue-engineered constructs, tissue engineers need versatile imaging methods capable of monitoring not only morphological but also functional and molecular information. However, there is no single imaging modality that is suitable for all tissue-engineered constructs. Each imaging method has its own range of applications and provides information based on the specific properties of the imaging technique. Therefore, according to the requirements of the tissue engineering studies, the most appropriate tool should be selected among a variety of imaging modalities. The goal of this review article is to describe available biomedical imaging methods to assess tissue engineering applications and to provide tissue engineers with criteria and insights for determining the best imaging strategies. Commonly used biomedical imaging modalities, including X-ray and computed tomography, positron emission tomography and single photon emission computed tomography, magnetic resonance imaging, ultrasound imaging, optical imaging, and emerging techniques and multimodal imaging, will be discussed, focusing on the latest trends of their applications in recent tissue engineering studies. PMID:25012069
Optical coherence tomography in gastroenterology: a review and future outlook
NASA Astrophysics Data System (ADS)
Tsai, Tsung-Han; Leggett, Cadman L.; Trindade, Arvind J.; Sethi, Amrita; Swager, Anne-Fré; Joshi, Virendra; Bergman, Jacques J.; Mashimo, Hiroshi; Nishioka, Norman S.; Namati, Eman
2017-12-01
Optical coherence tomography (OCT) is an imaging technique optically analogous to ultrasound that can generate depth-resolved images with micrometer-scale resolution. Advances in fiber optics and miniaturized actuation technologies allow OCT imaging of the human body and further expand OCT utilization in applications including but not limited to cardiology and gastroenterology. This review article provides an overview of current OCT development and its clinical utility in the gastrointestinal tract, including disease detection/differentiation and endoscopic therapy guidance, as well as a discussion of its future applications.
Solar-terrestrial models and application software
NASA Technical Reports Server (NTRS)
Bilitza, Dieter
1990-01-01
The empirical models related to solar-terrestrial sciences are listed and described which are available in the form of computer programs. Also included are programs that use one or more of these models for application specific purposes. The entries are grouped according to the region of the solar-terrestrial environment to which they belong and according to the parameter which they describe. Regions considered include the ionosphere, atmosphere, magnetosphere, planets, interplanetary space, and heliosphere. Also provided is the information on the accessibility for solar-terrestrial models to specify the magnetic and solar activity conditions.
Land Surface Process and Air Quality Research and Applications at MSFC
NASA Technical Reports Server (NTRS)
Quattrochi, Dale; Khan, Maudood
2007-01-01
This viewgraph presentation provides an overview of land surface process and air quality research at MSFC including atmospheric modeling and ongoing research whose objective is to undertake a comprehensive spatiotemporal analysis of the effects of accurate land surface characterization on atmospheric modeling results, and public health applications. Land use maps as well as 10 meter air temperature, surface wind, PBL mean difference heights, NOx, ozone, and O3+NO2 plots as well as spatial growth model outputs are included. Emissions and general air quality modeling are also discussed.
Sensing and Storing the Blood Pressure Measure by Patients through A Platform and Mobile Devices †.
Villarreal, Vladimir; Nielsen, Mel; Samudio, Manuel
2018-06-03
In this article, we present a platform that allows for the integration of different applications for the follow-up of patients with chronic diseases. We developed two elements: a mobile and a web application. The mobile application allows the capture and processing of vital signs for patients with high blood pressure (hypertension). This application allows for the patient to store the data obtained, provides historical information and trends of the stored measures, and provides alerts and recommendations according to ranges of measures that were obtained. The web application allows the doctor and patients to obtain updated information of the disease behavior through the measures obtained. We used different biometric devices including an efimomanometer, glucometer, scale, and a thermometer with a wi-fi connection. Through this web application, we also generated information about average measures at a given time, by age, by region, and by a specific date. The developed system was evaluated in a medical center with different types of patients.
Mobile healthcare informatics.
Siau, Keng; Shen, Zixing
2006-06-01
Advances in wireless technology give pace to the rapid development of mobile applications. The coming mobile revolution will bring dramatic and fundamental changes to our daily life. It will influence the way we live, the way we do things, and the way we take care of our health. For the healthcare industry, mobile applications provide a new frontier in offering better care and services to patients, and a more flexible and mobile way of communicating with suppliers and patients. Mobile applications will provide important real time data for patients, physicians, insurers, and suppliers. In addition, it will revolutionalize the way information is managed in the healthcare industry and redefine the doctor - patient communication. This paper discusses different aspects of mobile healthcare. Specifically, it presents mobile applications in healthcare, and discusses possible challenges facing the development of mobile applications. Obstacles in developing mobile healthcare applications include mobile device limitations, wireless networking problems, infrastructure constraints, security concerns, and user distrust. Research issues in resolving or alleviating these problems are also discussed in the paper.
Lim, Cherry; Wannapinij, Prapass; White, Lisa; Day, Nicholas P J; Cooper, Ben S; Peacock, Sharon J; Limmathurotsakul, Direk
2013-01-01
Estimates of the sensitivity and specificity for new diagnostic tests based on evaluation against a known gold standard are imprecise when the accuracy of the gold standard is imperfect. Bayesian latent class models (LCMs) can be helpful under these circumstances, but the necessary analysis requires expertise in computational programming. Here, we describe open-access web-based applications that allow non-experts to apply Bayesian LCMs to their own data sets via a user-friendly interface. Applications for Bayesian LCMs were constructed on a web server using R and WinBUGS programs. The models provided (http://mice.tropmedres.ac) include two Bayesian LCMs: the two-tests in two-population model (Hui and Walter model) and the three-tests in one-population model (Walter and Irwig model). Both models are available with simplified and advanced interfaces. In the former, all settings for Bayesian statistics are fixed as defaults. Users input their data set into a table provided on the webpage. Disease prevalence and accuracy of diagnostic tests are then estimated using the Bayesian LCM, and provided on the web page within a few minutes. With the advanced interfaces, experienced researchers can modify all settings in the models as needed. These settings include correlation among diagnostic test results and prior distributions for all unknown parameters. The web pages provide worked examples with both models using the original data sets presented by Hui and Walter in 1980, and by Walter and Irwig in 1988. We also illustrate the utility of the advanced interface using the Walter and Irwig model on a data set from a recent melioidosis study. The results obtained from the web-based applications were comparable to those published previously. The newly developed web-based applications are open-access and provide an important new resource for researchers worldwide to evaluate new diagnostic tests.
following requirements: The demonstration application includes a law enforcement interaction plan, which provides information for law enforcement and first responders regarding how to interact with the AV in an
Digital Light Processing update: status and future applications
NASA Astrophysics Data System (ADS)
Hornbeck, Larry J.
1999-05-01
Digital Light Processing (DLP) projection displays based on the Digital Micromirror Device (DMD) were introduced to the market in 1996. Less than 3 years later, DLP-based projectors are found in such diverse applications as mobile, conference room, video wall, home theater, and large-venue. They provide high-quality, seamless, all-digital images that have exceptional stability as well as freedom from both flicker and image lag. Marked improvements have been made in the image quality of DLP-based projection display, including brightness, resolution, contrast ratio, and border image. DLP-based mobile projectors that weighted about 27 pounds in 1996 now weight only about 7 pounds. This weight reduction has been responsible for the definition of an entirely new projector class, the ultraportable. New applications are being developed for this important new projection display technology; these include digital photofinishing for high process speed minilab and maxilab applications and DLP Cinema for the digital delivery of films to audiences around the world. This paper describes the status of DLP-based projection display technology, including its manufacturing, performance improvements, and new applications, with emphasis on DLP Cinema.
Krause, Denise D
2015-11-01
Health rankings in Mississippi are abysmal. Mississippi also has fewer physicians to serve its population compared with all other states. Many residents of this predominately rural state do not have access to healthcare providers. To better understand the demographics and distribution of the current health workforce in Mississippi, the main objective of the study was to design a Web-based, spatial, interactive application to visualize and explore the physician workforce. A Web application was designed to assist in health workforce planning. Secondary datasets of licensure and population information were obtained, and live feeds from licensure systems are being established. Several technologies were used to develop an intuitive, user-friendly application. Custom programming was completed in JavaScript so the application could run on most platforms, including mobile devices. The application allows users to identify and query geographic locations of individual or aggregated physicians based on attributes included in the licensure data, to perform drive time or buffer analyses, and to explore sociodemographic population data by geographic area of choice. This Web-based application with analytical tools visually represents the physician workforce licensed in Mississippi and its attributes, and provides access to much-needed information for statewide health workforce planning and research. The success of the application is not only based on the practicality of the tool but also on its ease of use. Feedback has been positive and has come from a wide variety of organizations across the state.
Porous graphene nanocages for battery applications
Amine, Khalil; Lu, Jun; Du, Peng; Wen, Jianguo; Curtiss, Larry A.
2017-03-07
An active material composition includes a porous graphene nanocage and a source material. The source material may be a sulfur material. The source material may be an anodic material. A lithium-sulfur battery is provided that includes a cathode, an anode, a lithium salt, and an electrolyte, where the cathode of the lithium-sulfur battery includes a porous graphene nanocage and a sulfur material and at least a portion of the sulfur material is entrapped within the porous graphene nanocage. Also provided is a lithium-air battery that includes a cathode, an anode, a lithium salt, and an electrolyte, where the cathode includes a porous graphene nanocage and where the cathode may be free of a cathodic metal catalyst.
Starmer, Heather M; Abrams, Rina; Webster, Kimberly; Kizner, Jennifer; Beadle, Beth; Holsinger, F Christopher; Quon, Harry; Richmon, Jeremy
2018-04-01
Dysphagia following treatment for head and neck cancer is one of the most significant morbidities impacting quality of life. Despite the value of prophylactic exercises to mitigate the impact of radiation on long-term swallowing function, adherence to treatment is limited. The purpose of this investigation was to explore the feasibility of a mobile health application to support patient adherence to swallowing therapy during radiation-based treatment. 36 patients undergoing radiation therapy were provided with the Vibrent™ mobile application as an adjunct to standard swallowing therapy. The application included exercise videos, written instructions, reminders, exercise logging, and educational content. 80% of participants used the app during treatment and logged an average of 102 exercise sessions over the course of treatment. 25% of participants logged at least two exercise sessions per day over the 7-week treatment period, and 53% recorded at least one session per day. Exit interviews regarding the patient experience with the Vibrent™ mobile application were largely positive, but also provided actionable strategies to improve future versions of the application. The Vibrent™ mobile application appears to be a tool that can be feasibly integrated into existing patient care practices and may assist patients in adhering to treatment recommendations and facilitate communication between patients and providers between encounters.
U.S. Geological Survey (USGS) Earthquake Web Applications
NASA Astrophysics Data System (ADS)
Fee, J.; Martinez, E.
2015-12-01
USGS Earthquake web applications provide access to earthquake information from USGS and other Advanced National Seismic System (ANSS) contributors. One of the primary goals of these applications is to provide a consistent experience for accessing both near-real time information as soon as it is available and historic information after it is thoroughly reviewed. Millions of people use these applications every month including people who feel an earthquake, emergency responders looking for the latest information about a recent event, and scientists researching historic earthquakes and their effects. Information from multiple catalogs and contributors is combined by the ANSS Comprehensive Catalog into one composite catalog, identifying the most preferred information from any source for each event. A web service and near-real time feeds provide access to all contributed data, and are used by a number of users and software packages. The Latest Earthquakes application displays summaries of many events, either near-real time feeds or custom searches, and the Event Page application shows detailed information for each event. Because all data is accessed through the web service, it can also be downloaded by users. The applications are maintained as open source projects on github, and use mobile-first and responsive-web-design approaches to work well on both mobile devices and desktop computers. http://earthquake.usgs.gov/earthquakes/map/
NiftyNet: a deep-learning platform for medical imaging.
Gibson, Eli; Li, Wenqi; Sudre, Carole; Fidon, Lucas; Shakir, Dzhoshkun I; Wang, Guotai; Eaton-Rosen, Zach; Gray, Robert; Doel, Tom; Hu, Yipeng; Whyntie, Tom; Nachev, Parashkev; Modat, Marc; Barratt, Dean C; Ourselin, Sébastien; Cardoso, M Jorge; Vercauteren, Tom
2018-05-01
Medical image analysis and computer-assisted intervention problems are increasingly being addressed with deep-learning-based solutions. Established deep-learning platforms are flexible but do not provide specific functionality for medical image analysis and adapting them for this domain of application requires substantial implementation effort. Consequently, there has been substantial duplication of effort and incompatible infrastructure developed across many research groups. This work presents the open-source NiftyNet platform for deep learning in medical imaging. The ambition of NiftyNet is to accelerate and simplify the development of these solutions, and to provide a common mechanism for disseminating research outputs for the community to use, adapt and build upon. The NiftyNet infrastructure provides a modular deep-learning pipeline for a range of medical imaging applications including segmentation, regression, image generation and representation learning applications. Components of the NiftyNet pipeline including data loading, data augmentation, network architectures, loss functions and evaluation metrics are tailored to, and take advantage of, the idiosyncracies of medical image analysis and computer-assisted intervention. NiftyNet is built on the TensorFlow framework and supports features such as TensorBoard visualization of 2D and 3D images and computational graphs by default. We present three illustrative medical image analysis applications built using NiftyNet infrastructure: (1) segmentation of multiple abdominal organs from computed tomography; (2) image regression to predict computed tomography attenuation maps from brain magnetic resonance images; and (3) generation of simulated ultrasound images for specified anatomical poses. The NiftyNet infrastructure enables researchers to rapidly develop and distribute deep learning solutions for segmentation, regression, image generation and representation learning applications, or extend the platform to new applications. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.
NASA Technical Reports Server (NTRS)
Brat, Guillaume P.; Martinie, Celia; Palanque, Philippe
2013-01-01
During early phases of the development of an interactive system, future system properties are identified (through interaction with end users in the brainstorming and prototyping phase of the application, or by other stakehold-ers) imposing requirements on the final system. They can be specific to the application under development or generic to all applications such as usability principles. Instances of specific properties include visibility of the aircraft altitude, speed… in the cockpit and the continuous possibility of disengaging the autopilot in whatever state the aircraft is. Instances of generic properties include availability of undo (for undoable functions) and availability of a progression bar for functions lasting more than four seconds. While behavioral models of interactive systems using formal description techniques provide complete and unambiguous descriptions of states and state changes, it does not provide explicit representation of the absence or presence of properties. Assessing that the system that has been built is the right system remains a challenge usually met through extensive use and acceptance tests. By the explicit representation of properties and the availability of tools to support checking these properties, it becomes possible to provide developers with means for systematic exploration of the behavioral models and assessment of the presence or absence of these properties. This paper proposes the synergistic use two tools for checking both generic and specific properties of interactive applications: Petshop and Java PathFinder. Petshop is dedicated to the description of interactive system behavior. Java PathFinder is dedicated to the runtime verification of Java applications and as an extension dedicated to User Interfaces. This approach is exemplified on a safety critical application in the area of interactive cockpits for large civil aircrafts.
ERIC Educational Resources Information Center
Gomez, Fabinton Sotelo; Ordóñez, Armando
2016-01-01
Previously a framework for integrating web resources providing educational services in dotLRN was presented. The present paper describes the application of this framework in a rural school in Cauca--Colombia. The case study includes two web resources about the topic of waves (physics) which is oriented in secondary education. Web classes and…
NASA Technical Reports Server (NTRS)
Hansen, Timothy D.; Bardwell, Micheal J.
1996-01-01
Portable spray booth provides for controlled application of coating materials with high solvent contents. Includes contoured shroud and carbon filter bed limiting concentration of fumes in vicinity. Designed to substitute spraying for brush application of solvent-based adhesive prior to installing rubber waterproof seals over joints between segments of solid-fuel rocket motor. With minor adjustments and modifications, used to apply other solvent-based adhesives, paints, and like.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-03
... June 9, 2013 through September 9, 2013, 4 p.m. eastern standard time. The NOFA includes eligibility and... services to travel to VA and non-VA facilities and otherwise assist in providing transportation services in connection with the provision of VA medical care. To allow applicants more time to complete the application...
Applications of microarray technology in breast cancer research
Cooper, Colin S
2001-01-01
Microarrays provide a versatile platform for utilizing information from the Human Genome Project to benefit human health. This article reviews the ways in which microarray technology may be used in breast cancer research. Its diverse applications include monitoring chromosome gains and losses, tumour classification, drug discovery and development, DNA resequencing, mutation detection and investigating the mechanism of tumour development. PMID:11305951
Review and Application of ASME NOG-1 and ASME NUM-1-2000
NASA Technical Reports Server (NTRS)
Lytle, Bradford P.; Delgado, H. (Technical Monitor)
2002-01-01
The intent of the workshop is to review the application of the ASME Nuclear Crane Standards ASME NOG-1 and ASME NUM-1-2000. The ASME Nuclear Crane standards provide a basis for purchasing overhead handling equipment with enhanced safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities.
Transportation planning and ITS : putting the pieces together
DOT National Transportation Integrated Search
1998-01-01
Intelligent Transportation Systems (ITS) include the application of computer, electronics, and communications technologies and management strategies -- in an integrated manner -- providing traveler information to increase the safety and efficiency of...
Financing CHP Projects at Wastewater Treatment Facilities with Clean Water State Revolving Funds
This factsheet provides information about CHP at wastewater treatment facilities, including applications, financial challenges, and financial opportunities, such as the Clean Water State Revolving Fund.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-13
... necessary for the proper performance of VBA's functions, including whether the information will have... entitlement determination, to gain and keep suitable employment. Vocational rehabilitation also provides...
Bibliography. Computer-Oriented Projects, 1987.
ERIC Educational Resources Information Center
Smith, Richard L., Comp.
1988-01-01
Provides an annotated list of references on computer-oriented projects. Includes information on computers; hands-on versus simulations; games; instruction; students' attitudes and learning styles; artificial intelligence; tutoring; and application of spreadsheets. (RT)
Enhancing UCSF Chimera through web services.
Huang, Conrad C; Meng, Elaine C; Morris, John H; Pettersen, Eric F; Ferrin, Thomas E
2014-07-01
Integrating access to web services with desktop applications allows for an expanded set of application features, including performing computationally intensive tasks and convenient searches of databases. We describe how we have enhanced UCSF Chimera (http://www.rbvi.ucsf.edu/chimera/), a program for the interactive visualization and analysis of molecular structures and related data, through the addition of several web services (http://www.rbvi.ucsf.edu/chimera/docs/webservices.html). By streamlining access to web services, including the entire job submission, monitoring and retrieval process, Chimera makes it simpler for users to focus on their science projects rather than data manipulation. Chimera uses Opal, a toolkit for wrapping scientific applications as web services, to provide scalable and transparent access to several popular software packages. We illustrate Chimera's use of web services with an example workflow that interleaves use of these services with interactive manipulation of molecular sequences and structures, and we provide an example Python program to demonstrate how easily Opal-based web services can be accessed from within an application. Web server availability: http://webservices.rbvi.ucsf.edu/opal2/dashboard?command=serviceList. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.
Hydrophilic interaction chromatography (HILIC) in the analysis of antibiotics.
Kahsay, Getu; Song, Huiying; Van Schepdael, Ann; Cabooter, Deirdre; Adams, Erwin
2014-01-01
This paper presents a general overview of the application of hydrophilic interaction chromatography (HILIC) in the analysis of antibiotics in different sample matrices including pharmaceutical, plasma, serum, fermentation broths, environmental water, animal origin, plant origin, etc. Specific applications of HILIC for analysis of aminoglycosides, β-lactams, tetracyclines and other antibiotics are reviewed. HILIC can be used as a valuable alternative LC mode for separating small polar compounds. Polar samples usually show good solubility in the mobile phase containing some water used in HILIC, which overcomes the drawbacks of the poor solubility often encountered in normal phase LC. HILIC is suitable for analyzing compounds in complex systems that elute near the void in reversed-phase chromatography. Ion-pair reagents are not required in HILIC which makes it convenient to couple with MS hence its increased popularity in recent years. In this review, the retention mechanism in HILIC is briefly discussed and a list of important applications is provided including main experimental conditions and a brief summary of the results. The references provide a comprehensive overview and insight into the application of HILIC in antibiotics analysis. Copyright © 2013 Elsevier B.V. All rights reserved.
Micro-miniature radio frequency transmitter for communication and tracking applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crutcher, R.I.; Emery, M.S.; Falter, K.G.
1996-12-31
A micro-miniature radio frequency (rf) transmitter has been developed and demonstrated by the Oak Ridge National Laboratory. The objective of the rf transmitter development was to maximize the transmission distance while drastically shrinking the overall transmitter size, including antenna. Based on analysis and testing, an application-specific integrated circuit (ASIC) with a 16-GHz gallium arsenide (GaAs) oscillator and integrated on-chip antenna was designed and fabricated using microwave monolithic integrated circuit (MMIC) technology. Details of the development and the results of various field tests will be discussed. The rf transmitter is applicable to covert surveillance and tracking scenarios due to its smallmore » size of 2.2 x 2.2 mm, including the antenna. Additionally, the 16-GHz frequency is well above the operational range of consumer-grade radio scanners, providing a degree of protection from unauthorized interception. Variations of the transmitter design have been demonstrated for tracking and tagging beacons, transmission of digital data, and transmission of real-time analog video from a surveillance camera. Preliminary laboratory measurements indicate adaptability to direct-sequence spread-spectrum transmission, providing a low probability of intercept and/or detection. Concepts related to law enforcement applications will be presented.« less
Multidisciplinary Optimization Branch Experience Using iSIGHT Software
NASA Technical Reports Server (NTRS)
Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.
1999-01-01
The Multidisciplinary Optimization (MDO) Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. An optimization framework call improve the design process while reducing time and costs. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. Since the release of version 4.0, the MDO Branch has gained experience with the iSIGHT framework developed by Engineous Software, Inc. This paper describes experiences with four aerospace applications: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. All applications have been successfully tested using the iSIGHT framework, except for the aerospike nozzle problem, which is in progress. Brief overviews of each problem are provided. The problem descriptions include the number and type of disciplinary codes, as well as all estimate of the multidisciplinary analysis execution time. In addition, the optimization methods, objective functions, design variables, and design constraints are described for each problem. Discussions on the experience gained and lessons learned are provided for each problem. These discussions include the advantages and disadvantages of using the iSIGHT framework for each case as well as the ease of use of various advanced features. Potential areas of improvement are identified.
Intelligent subsystem interface for modular hardware system
NASA Technical Reports Server (NTRS)
Caffrey, Robert T. (Inventor); Krening, Douglas N. (Inventor); Lannan, Gregory B. (Inventor); Schneiderwind, Michael J. (Inventor); Schneiderwind, Robert A. (Inventor)
2000-01-01
A single chip application specific integrated circuit (ASIC) which provides a flexible, modular interface between a subsystem and a standard system bus. The ASIC includes a microcontroller/microprocessor, a serial interface for connection to the bus, and a variety of communications interface devices available for coupling to the subsystem. A three-bus architecture, utilizing arbitration, provides connectivity within the ASIC and between the ASIC and the subsystem. The communication interface devices include UART (serial), parallel, analog, and external device interface utilizing bus connections paired with device select signals. A low power (sleep) mode is provided as is a processor disable option.
NASA Astrophysics Data System (ADS)
Tripathi, Vijay S.; Yeh, G. T.
1993-06-01
Sophisticated and highly computation-intensive models of transport of reactive contaminants in groundwater have been developed in recent years. Application of such models to real-world contaminant transport problems, e.g., simulation of groundwater transport of 10-15 chemically reactive elements (e.g., toxic metals) and relevant complexes and minerals in two and three dimensions over a distance of several hundred meters, requires high-performance computers including supercomputers. Although not widely recognized as such, the computational complexity and demand of these models compare with well-known computation-intensive applications including weather forecasting and quantum chemical calculations. A survey of the performance of a variety of available hardware, as measured by the run times for a reactive transport model HYDROGEOCHEM, showed that while supercomputers provide the fastest execution times for such problems, relatively low-cost reduced instruction set computer (RISC) based scalar computers provide the best performance-to-price ratio. Because supercomputers like the Cray X-MP are inherently multiuser resources, often the RISC computers also provide much better turnaround times. Furthermore, RISC-based workstations provide the best platforms for "visualization" of groundwater flow and contaminant plumes. The most notable result, however, is that current workstations costing less than $10,000 provide performance within a factor of 5 of a Cray X-MP.
Code of Federal Regulations, 2010 CFR
2010-10-01
... provide concerning SAP services to an employee who has a DOT drug and alcohol regulation violation? 40.287... § 40.287 What information is an employer required to provide concerning SAP services to an employee who... (including an applicant or new employee) who violates a DOT drug and alcohol regulation a listing of SAPs...
USDA-ARS?s Scientific Manuscript database
The ability to decipher DNA sequences provides new insights into the study of plant viruses and their interactions with host plants, including the intricate interactions that allow a virus to be transmitted by an insect vector. Next generation sequencing (NGS) provides a wealth of genetic informati...
USDA-ARS?s Scientific Manuscript database
Use of electromagnetic induction (EMI) instruments has increased as a tool to map soils because it provides a means of locating suitable sampling sites that provide the basis for mapping the spatial variability of various soil properties either directly or indirectly measured with EMI, including sa...
Wentworth Institute of Technology Factbook. Issue #7.
ERIC Educational Resources Information Center
Wentworth Inst. of Technology, Boston, MA.
Current and historical information on the Wentworth Institute of Technology (WIT) is provided in this factbook, with focus on college programs, applicants, enrollments, graduates, and other services. Part I provides a brief overview of the 83-year history of the college. Part II looks at the organization and administration of WIT, including data…
Aligned and Electrospun Piezoelectric Polymer Fiber Assembly and Scaffold
NASA Technical Reports Server (NTRS)
Holloway, Nancy M. (Inventor); Scott-Carnell, Lisa A. (Inventor); Siochi, Emilie J. (Inventor); Leong, Kam W. (Inventor); Kulangara, Karina (Inventor)
2015-01-01
A scaffold assembly and related methods of manufacturing and/or using the scaffold for stem cell culture and tissue engineering applications are disclosed which at least partially mimic a native biological environment by providing biochemical, topographical, mechanical and electrical cues by using an electroactive material. The assembly includes at least one layer of substantially aligned, electrospun polymer fiber having an operative connection for individual voltage application. A method of cell tissue engineering and/or stem cell differentiation uses the assembly seeded with a sample of cells suspended in cell culture media, incubates and applies voltage to one or more layers, and thus produces cells and/or a tissue construct. In another aspect, the invention provides a method of manufacturing the assembly including the steps of providing a first pre-electroded substrate surface; electrospinning a first substantially aligned polymer fiber layer onto the first surface; providing a second pre-electroded substrate surface; electrospinning a second substantially aligned polymer fiber layer onto the second surface; and, retaining together the layered surfaces with a clamp and/or an adhesive compound.
Aligned and Electrospun Piezoelectric Polymer Fiber Assembly and Scaffold
NASA Technical Reports Server (NTRS)
Kulangara, Karina (Inventor); Scott Carnell, Lisa A. (Inventor); Holloway, Nancy M. (Inventor); Leong, Kam W. (Inventor); Siochi, Emilie J. (Inventor)
2017-01-01
A method of manufacturing and/or using a scaffold assembly for stem cell culture and tissue engineering applications is disclosed. The scaffold at least partially mimics a native biological environment by providing biochemical, topographical, mechanical and electrical cues by using an electroactive material. The assembly includes at least one layer of substantially aligned, electrospun polymer fiber having an operative connection for individual voltage application. A method of cell tissue engineering and/or stem cell differentiation that uses the assembly seeded with a sample of cells suspended in cell culture media, incubates and applies voltage to one or more layers, and thus produces cells and/or a tissue construct. In another aspect, the invention provides a method of manufacturing the assembly including the steps of providing a first pre-electroded substrate surface; electrospinning a first substantially aligned polymer fiber layer onto the first surface; providing a second pre-electroded substrate surface; electrospinning a second substantially aligned polymer fiber layer onto the second surface; and, retaining together the layered surfaces with a clamp and/or an adhesive compound.
JPL Space Telecommunications Radio System Operating Environment
NASA Technical Reports Server (NTRS)
Lux, James P.; Lang, Minh; Peters, Kenneth J.; Taylor, Gregory H.; Duncan, Courtney B.; Orozco, David S.; Stern, Ryan A.; Ahten, Earl R.; Girard, Mike
2013-01-01
A flight-qualified implementation of a Software Defined Radio (SDR) Operating Environment for the JPL-SDR built for the CoNNeCT Project has been developed. It is compliant with the NASA Space Telecommunications Radio System (STRS) Architecture Standard, and provides the software infrastructure for STRS compliant waveform applications. This software provides a standards-compliant abstracted view of the JPL-SDR hardware platform. It uses industry standard POSIX interfaces for most functions, as well as exposing the STRS API (Application Programming In terface) required by the standard. This software includes a standardized interface for IP components instantiated within a Xilinx FPGA (Field Programmable Gate Array). The software provides a standardized abstracted interface to platform resources such as data converters, file system, etc., which can be used by STRS standards conformant waveform applications. It provides a generic SDR operating environment with a much smaller resource footprint than similar products such as SCA (Software Communications Architecture) compliant implementations, or the DoD Joint Tactical Radio Systems (JTRS).
Commercialization of Advanced Communications Technology Satellite (ACTS) technology
NASA Astrophysics Data System (ADS)
Plecity, Mark S.; Strickler, Walter M.; Bauer, Robert A.
1996-03-01
In an on-going effort to maintain United States leadership in communication satellite technology, the National Aeronautics and Space Administration (NASA), led the development of the Advanced Communications Technology Satellite (ACTS). NASA's ACTS program provides industry, academia, and government agencies the opportunity to perform both technology and telecommunication service experiments with a leading-edge communication satellite system. Over 80 organizations are using ACTS as a multi server test bed to establish communication technologies and services of the future. ACTS was designed to provide demand assigned multiple access (DAMA) digital communications with a minimum switchable circuit bandwidth of 64 Kbps, and a maximum channel bandwidth of 900 MHZ. It can, therefore, provide service to thin routes as well as connect fiber backbones in supercomputer networks, across oceans, or restore full communications in the event of national or manmade disaster. Service can also be provided to terrestrial and airborne mobile users. Commercial applications of ACTS technologies include: telemedicine; distance education; Department of Defense operations; mobile communications, aeronautical applications, terrestrial applications, and disaster recovery. This paper briefly describes the ACTS system and the enabling technologies employed by ACTS including Ka-band hopping spot beams, on-board routing and switching, and rain fade compensation. When used in conjunction with a time division multiple access (TDMA) architecture, these technologies provide a higher capacity, lower cost satellite system. Furthermore, examples of completed user experiments, future experiments, and plans of organizations to commercialize ACTS technology in their own future offerings will be discussed.
Turbine design and application volumes 1, 2, and 3
NASA Technical Reports Server (NTRS)
Glassman, Arthur J. (Editor)
1994-01-01
NASA has an interest in turbines related primarily to aeronautics and space applications. Airbreathing turbine engines provide jet and turboshaft propulsion, as well as auxiliary power for aircraft. Propellant-driven turbines provide rocket propulsion and auxiliary power for spacecraft. Closed-cycle turbine engines using inert gases, organic fluids, and metal fluids have been studied for providing long-duration electric power for spacecraft. Other applications of interest for turbine engines include land-vehicle (cars, trucks, buses, trains, etc.) propulsion power and ground-based electrical power. In view of the turbine-system interest and efforts at Lewis Research Center, a course entitled 'Turbine Design and Application' was presented during 1968-69 as part of the In-house Graduate Study Program. The course was somewhat revised and again presented in 1972-73. Various aspects of turbine technology were covered including thermodynamic and fluid-dynamic concepts, fundamental turbine concepts, velocity diagrams, losses, blade aerodynamic design, blade cooling, mechanical design, operation, and performance. The notes written and used for the course have been revised and edited for publication. Such a publication can serve as a foundation for an introductory turbine course, a means for self-study, or a reference for selected topics. Any consistent set of units will satisfy the equations presented. Two commonly used consistent sets of units and constant values are given after the symbol definitions. These are the SI units and the U.S. customary units. A single set of equations covers both sets of units by including all constants required for the U.S. customary units and defining as unity those not required for the SI units. Three volumes are compiled into one.
Concept analysis of culture applied to nursing.
Marzilli, Colleen
2014-01-01
Culture is an important concept, especially when applied to nursing. A concept analysis of culture is essential to understanding the meaning of the word. This article applies Rodgers' (2000) concept analysis template and provides a definition of the word culture as it applies to nursing practice. This article supplies examples of the concept of culture to aid the reader in understanding its application to nursing and includes a case study demonstrating components of culture that must be respected and included when providing health care.
NASA Technical Reports Server (NTRS)
Smith, Paul H.
1988-01-01
The Computer Science Program provides advanced concepts, techniques, system architectures, algorithms, and software for both space and aeronautics information sciences and computer systems. The overall goal is to provide the technical foundation within NASA for the advancement of computing technology in aerospace applications. The research program is improving the state of knowledge of fundamental aerospace computing principles and advancing computing technology in space applications such as software engineering and information extraction from data collected by scientific instruments in space. The program includes the development of special algorithms and techniques to exploit the computing power provided by high performance parallel processors and special purpose architectures. Research is being conducted in the fundamentals of data base logic and improvement techniques for producing reliable computing systems.
A Meteorological Supersite for Aviation and Cold Weather Applications
NASA Astrophysics Data System (ADS)
Gultepe, Ismail; Agelin-Chaab, M.; Komar, J.; Elfstrom, G.; Boudala, F.; Zhou, B.
2018-05-01
The goal of this study is to better understand atmospheric boundary layer processes and parameters, and to evaluate physical processes for aviation applications using data from a supersite observing site. Various meteorological sensors, including a weather and environmental unmanned aerial vehicle (WE-UAV), and a fog and snow tower (FSOS) observations are part of the project. The PanAm University of Ontario Institute of Technology (UOIT) Meteorological Supersite (PUMS) observations are being collected from April 2015 to date. The FSOS tower gathers observations related to rain, snow, fog, and visibility, aerosols, solar radiation, and wind and turbulence, as well as surface and sky temperature. The FSOSs are located at three locations at about 450-800 m away from the PUMS supersite. The WE-UAV measurements representing aerosol, wind speed and direction, as well as temperature (T) and relative humidity (RH) are provided during clear weather conditions. Other measurements at the PUMS site include cloud backscattering profiles from CL51 ceilometer, MWR observations of liquid water content (LWC), T, and RH, and Microwave Rain Radar (MRR) reflectivity profile, as well as the present weather type, snow water depth, icing rate, 3D-ultrasonic wind and turbulence, and conventional meteorological observations from compact weather stations, e.g., WXTs. The results based on important weather event studies, representing fog, snow, rain, blowing snow, wind gust, planetary boundary layer (PBL) wind research for UAV, and icing conditions are given. The microphysical parameterizations and analysis processes for each event are provided, but the results should not be generalized for all weather events and be used cautiously. Results suggested that integrated observing systems based on data from a supersite as well as satellite sites can provide better information applicable to aviation meteorology, including PBL weather research, validation of numerical weather model predictions, and remote-sensing retrievals. Overall, the results from the five cases are provided and challenges related to observations applicable to aviation meteorology are discussed.
Model Data Interoperability for the United States Integrated Ocean Observing System (IOOS)
NASA Astrophysics Data System (ADS)
Signell, Richard P.
2010-05-01
Model data interoperability for the United States Integrated Ocean Observing System (IOOS) was initiated with a focused one year project. The problem was that there were many regional and national providers of oceanographic model data; each had unique file conventions, distribution techniques and analysis tools that made it difficult to compare model results and observational data. To solve this problem, a distributed system was built utilizing a customized middleware layer and a common data model. This allowed each model data provider to keep their existing model and data files unchanged, yet deliver model data via web services in a common form. With standards-based applications that used these web services, end users then had a common way to access data from any of the models. These applications included: (1) a 2D mapping and animation using a web browser application, (2) an advanced 3D visualization and animation using a desktop application, and (3) a toolkit for a common scientific analysis environment. Due to the flexibility and low impact of the approach on providers, rapid progress was made. The system was implemented in all eleven US IOOS regions and at the NOAA National Coastal Data Development Center, allowing common delivery of regional and national oceanographic model forecast and archived results that cover all US waters. The system, based heavily on software technology from the NSF-sponsored Unidata Program Center, is applicable to any structured gridded data, not just oceanographic model data. There is a clear pathway to expand the system to include unstructured grid (e.g. triangular grid) data.