Bridge Building between North and South: Applied Technology for the Third World. Sonderdienst SO 2-87(e).

ERIC Educational Resources Information Center

Mensing, Friedhelm

In order to adapt new technologies and special processes to the particular conditions of developing nations, the German Appropriate Technology Exchange (GATE) was established in 1978 within the German Agency for Technical Cooperation (GTZ). This document traces the major aspects of cooperation between the Federal Republic of Germany and its…

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

Universal Design for Learning: A Blueprint for Success for All Learners

ERIC Educational Resources Information Center

Brand, Susan Trostle; Favazza, Antoinette E.; Dalton, Elizabeth M.

2012-01-01

The Center for Applied Special Technology, Inc. (CAST), an educational research organization, introduced Universal Design for Learning (UDL) in its earliest form nearly 25 years ago. According to Orkwis and McLane (1998), UDL is a tangible means by which educators implement the special education requirements and sustain the gains that were…

[Formulation and special investigations of innovative intraoral solid dosage forms.

PubMed

Kristo, K; kATONA, B; Piukovics, P; Olah, I; Sipos, B; Sipos, S E; Sovany, T; Hodi, K; Ifi Regdon, G

During our work, we summarized the types of solid dosage forms which were in the focus of attention in the last years because of their innovative pharmaceutical technology solution and simple use. The biopharmaceutics of solid dosage forms for intraoral use and the advantages of the use of these dosages forms were presented in general. However, these dosage forms cannot always be prepared with conventional pharmaceutical processes, therefore the special pharmaceutical solutions which can be applied for their preparation were presented. In addition to testing the European Pharmacopoeia dosage forms, the special tests which can be applied for the characterization of innovative solid dosage forms were highlighted.

ITS Technologies in Military Wheeled Tactical Vehicles: Status Quo and the Future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knee, H.E.

2001-07-02

The U.S. Army operates and maintains the largest trucking fleet in the United States. Its fleet consists of over 246,000 trucks, and it is responsible for buying and developing trucks for all branches of the armed forces. The Army's tactical wheeled vehicle fleet is the logistical backbone of the Army, and annually, the fleet logs about 823 million miles. The fleet consists of a number of types of vehicles. They include eight different families of trucks from the High Mobility Multi-Purpose Wheeled Vehicles to M900 series line haul tractors and special bodies. The average age of all the trucks withinmore » the Army fleet is 15 years, and very few have more than traditional driving instrumentation on-board. Over the past decade, the Department of Transportation's (DOT's) Intelligent Transportation Systems (ITS) Program has conducted research and deployment activities in a number of areas including in-vehicle systems, communication and telematics technologies. Many current model passenger vehicles have demonstrated the assimilation of these technologies to enhance safety and trip quality. Commercial vehicles are also demonstrating many new electronic devices that are assisting in making them safer and more efficient. Moreover, a plethora of new technologies are about to be introduced to drivers that promise greater safety, enhanced efficiency, congestion avoidance, fuel usage reduction, and enhanced trip quality. The U.S. Army has special needs with regard to fleet management, logistics, sustainability, reliability, survivability, and fuel consumption that goes beyond similar requirements within the private industry. In order to effectively apply emerging ITS technologies to the special needs of the U.S. Army, planning for the conduct of the Army's Vehicle Intelligence Program (AVIP) has now commenced. The AVIP will be focused on the conduct of research that: (1) will apply ITS technologies to the special needs of the Army, and (2) will conduct research for special needs wi th regard to vehicle control, driver assistance, integration of vehicle intelligence and robotic technologies, managing effectively the information flow to drivers, enhanced logistics capabilities and sustainability of the Army's fleet during battlefield conditions. This paper will highlight the special needs of the Army, briefly describe two programs, which are embracing ITS technologies to a limited extent, will outline the AVIP, and will provide some insight into future Army vehicle intelligence efforts.« less

NASA spinoffs to bioengineering and medicine

NASA Technical Reports Server (NTRS)

Rouse, Doris J.; Winfield, Daniel L.; Canada, S. Catherine

1989-01-01

The societal and economic benefits derived from the application of aerospace technology to improved health care are examined, and examples of the space-technology spinoffs are presented. Special attention is given to the applications of aerospace technology from digital image processing, space medicine and biology, microelectronics, optics and electrooptics, and ultrasonic imaging. The role of the NASA Technology Application Team in helping the potential technology users to identify and evaluate the technology transfer opportunities and to apply space technology in the field of medicine is discussed.

Entrepreneur Grows Microswitch Company

DOE Office of Scientific and Technical Information (OSTI.GOV)

Czaja, Danny; Christenson, Todd

2014-10-24

Todd Christenson took advantage of Sandia National Laboratories’ Entrepreneurial Separation to Transfer Technology (ESTT) program to start HT MicroAnalytical (HT Micro) in 2003 in order to apply his specialized expertise in high aspect ratio microfabrication (HARM) technology gained while at Sandia to the creation of the world’s smallest electromechanical switches.

34 CFR 403.131 - Who is eligible for an award under the Special Programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Who is eligible for an award under the Special Programs? 403.131 Section 403.131 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY...

34 CFR 403.188 - What is a State's responsibility for the cost of services and activities for members of special...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Financial Conditions... 34 Education 3 2010-07-01 2010-07-01 false What is a State's responsibility for the cost of services and activities for members of special populations? 403.188 Section 403.188 Education Regulations...

Regenerative medicine technology applied to gastroenterology: current status and future perspectives.

PubMed

Orlando, Giuseppe

2012-12-21

This special issue of World Journal of Gastroenterology has been conceived to illustrate to gastroenterology operators the role that regenerative medicine (RM) will have in the progress of gastrointestinal (GI) medicine. RM is a multidisciplinary field aiming to replace, regenerate or repair diseased tissues or organs. The past decade has been marked by numerous ground-breaking achievements that led experts in the field to manufacture functional substitutes of relatively simple organs. This progress is paving the ground for investigations that aims to the bioengineering and regeneration of more complex organs like livers, pancreas and intestine. In this special issue, the reader will be introduced, hand-in-hand, to explore the field of RM and will be educated on the progress, pitfalls and promise of RM technologies as applied to GI medicine.

Ethics in technological culture: a programmatic proposal for a pragmatist approach.

PubMed

Keulartz, Jozef; Schermer, Maartje; Korthals, Michiel; Swierstra, Tsjalling

2004-01-01

Neither traditional philosophy nor current applied ethics seem able to cope adequately with the highly dynamic character of our modern technological culture. This is because they have insufficient insight into the moral significance of technological artifacts and systems. Here, much can be learned from recent science and technology studies (STS). They have opened up the black box of technological developments and have revealed the intimate intertwinement of technology and society in minute detail. However, while applied ethics is characterized by a certain "technology blindness," the most influential approaches within STS show a "normative deficit" and display on agnostic or even antagonistic attitude toward ethics. To repair the blind spots of both applied ethics and STS, the authors sketch the contours of a pragmatist approach. They will explore the tasks and tools of a pragmatist ethics and pay special attention to the exploration of future worlds disclosed and shaped by technology and the management of deep value conflicts inherent in a pluralistic society.

Computational fluid dynamics for propulsion technology: Geometric grid visualization in CFD-based propulsion technology research

NASA Technical Reports Server (NTRS)

Ziebarth, John P.; Meyer, Doug

1992-01-01

The coordination is examined of necessary resources, facilities, and special personnel to provide technical integration activities in the area of computational fluid dynamics applied to propulsion technology. Involved is the coordination of CFD activities between government, industry, and universities. Current geometry modeling, grid generation, and graphical methods are established to use in the analysis of CFD design methodologies.

"Learn by Doing" Research: Introduction

ERIC Educational Resources Information Center

Moye, Johnny J.; Dugger, William E., Jr.; Starkweather, Kendall N.

2014-01-01

The research in this "Learning by Doing" study focuses on a special type of doing that applies to science, technology, engineering, and mathematics (STEM) education. In the early stages of humankind, the act of doing was essential for survival and drove the evolution of technology. As was true in ancient times, knowledge and the ability…

Entrepreneur Grows Microswitch Company

ScienceCinema

Czaja, Danny; Christenson, Todd

2018-05-30

Todd Christenson took advantage of Sandia National Laboratories’ Entrepreneurial Separation to Transfer Technology (ESTT) program to start HT MicroAnalytical (HT Micro) in 2003 in order to apply his specialized expertise in high aspect ratio microfabrication (HARM) technology gained while at Sandia to the creation of the world’s smallest electromechanical switches.

Regenerative medicine technology applied to gastroenterology: Current status and future perspectives

PubMed Central

Orlando, Giuseppe

2012-01-01

This special issue of World Journal of Gastroenterology has been conceived to illustrate to gastroenterology operators the role that regenerative medicine (RM) will have in the progress of gastrointestinal (GI) medicine. RM is a multidisciplinary field aiming to replace, regenerate or repair diseased tissues or organs. The past decade has been marked by numerous ground-breaking achievements that led experts in the field to manufacture functional substitutes of relatively simple organs. This progress is paving the ground for investigations that aims to the bioengineering and regeneration of more complex organs like livers, pancreas and intestine. In this special issue, the reader will be introduced, hand-in-hand, to explore the field of RM and will be educated on the progress, pitfalls and promise of RM technologies as applied to GI medicine. PMID:23322983

Applications of Video-Conferencing Technology in Special Education Teacher Preparation

ERIC Educational Resources Information Center

Israel, Maya; Knowlton, Earle; Griswold, Deborah; Rowland, Amber

2009-01-01

Teacher educators must find ways to teach course content situated within realistic K-12 contexts so that their preservice teachers can better understand how to apply that content effectively in situations they will face as professionals. Video-conferencing (VC) technology has emerged as a useful tool in teacher education, evincing a wide range of…

The Effectiveness and Usability of the Educational Software on Concept Education for Young Children with Impaired Hearing

ERIC Educational Resources Information Center

Goker, Hanife; Ozaydin, Latife; Tekedere, Hakan

2016-01-01

Early intervention and early education have a special place in educating the children with Impaired Hearing (IH). The advancements in information and communication technologies have led to adopting the view that such technologies could be applied in the educational process of the children with IH. Besides, the positive results acquired in the…

Current status of amorphous formulation and other special dosage forms as formulations for early clinical phases.

PubMed

Kawakami, Kohsaku

2009-09-01

Although most chemists in the pharmaceutical industry have a good understanding on favorable physicochemical properties for drug candidates, formulators must still deal with many challenging candidates. On the other hand, formulators are not allowed to spend much time on formulation development for early phases of the clinical studies. Thus, it is basically difficult to apply special dosage form technologies to the candidates for the first-in-human formulations. Despite the availability of numerous reviews on oral special dosage forms, information on their applicability as the early phase formulation has been limited. This article describes quick review on the oral special dosage forms that may be applied to the early clinical formulations, followed by discussion focused on the amorphous formulations, which still has relatively many issues to be proved for the general use. The major problems that inhibit the use of the amorphous formulation are difficulty in the manufacturing and the poor chemical/physical stability. Notably, the poor physical stability can be critical, because of not the poor stability itself but the difficulty in the timely evaluation in the preclinical developmental timeframes. Research directions of the amorphous formulations are suggested to utilize this promising technology without disturbing the preclinical developmental timelines.

The Applied and Workforce Baccalaureate at South Texas College: Specialized Workforce Development Addressing Economic Development

ERIC Educational Resources Information Center

Mejia, Juan E.

2012-01-01

South Texas College (STC), created in 1993 as South Texas Community College (STCC), has developed from a concept by visionary leaders in the region to currently offering more than one hundred degree and certificate options for students from the counties of Hidalgo and Starr, including two bachelor of applied technology (B.A.T.) degrees. These…

Emerging technologies for sustainable irrigation – a tribute to the career of Terry Howell, Sr. Selected papers from the 2015 ASABE and IA irrigation symposium

USDA-ARS?s Scientific Manuscript database

This article is an introduction to the “Emerging Technologies in Sustainable Irrigation – A Tribute to the Career of Terry Howell, Sr.” Special Collection in this issue of Transactions ASABE and the next issue of Applied Engineering in Agriculture, consisting of 15 articles selected from 62 papers a...

Airborne Next: Rethinking Airborne Organization and Applying New Concepts

DTIC Science & Technology

2015-06-01

9 Kenneth Macksey, Guderian: Panzer General-revised EDITION (South Yorkshire, England: Greenhill Books, 2003), 1–20. 10 Dr. John Arquilla...Airborne Operations: Field Manual 90=26, 1–5. 14 The 1st Special Forces Regiment has five active Special Forces Groups (1st, 3rd, 5th , 7th, 10th...Oxford University Press, 1981). Headrick, in his book, describes the interplay between technology and imperialism. For the purposes of this research

Les centres specialises des colleges et les services comparables: Un tableau de la situation (Specialized Centers at Colleges and Comparable Services: A Profile of the Situation).

ERIC Educational Resources Information Center

Lebel, Denis

In 1978, the two-year colleges of general and professional education (CEGEP) of Quebec were charged with taking on a more vigorous role in the economic development of the province. To formalize this new orientation, a number of vocational education and applied research centers were created, each specializing in a particular key technology. Centers…

34 CFR 403.195 - What are the administrative cost requirements applicable to local recipients?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Conditions Must be Met by Local Recipients? § 403... educational agency, that receives an award under a basic program listed in § 403.60 or a special program...

Collaborative Paradigm of Preventive, Personalized, and Precision Medicine With Point-of-Care Technologies.

PubMed

Dhawan, Atam P

2016-01-01

Recent advances in biosensors, medical instrumentation, and information processing and communication technologies (ICT) have enabled significant improvements in healthcare. However, these technologies have been mainly applied in clinical environments, such as hospitals and healthcare facilities, under managed care by well-trained and specialized individuals. The global challenge of providing quality healthcare at affordable cost leads to the proposed paradigm of P reventive, Personalized, and Precision Medicine that requires a seamless use of technology and infrastructure support for patients and healthcare providers at point-of-care (POC) locations including homes, semi or pre-clinical facilities, and hospitals. The complexity of the global healthcare challenge necessitates strong collaborative interdisciplinary synergies involving all stakeholder groups including academia, federal research institutions, industry, regulatory agencies, and clinical communities. It is critical to evolve with collaborative efforts on the translation of research to technology development toward clinical validation and potential healthcare applications. This special issue is focused on technology innovation and translational research for POC applications with potential impact in improving global healthcare in the respective areas. Some of these papers were presented at the NIH-IEEE Strategic Conference on Healthcare Innovations and POC Technologies for Precision Medicine (HI-POCT) held at the NIH on November 9-10, 2015. The papers included in the Special Issue provide a spectrum of critical issues and collaborative resources on translational research of advanced POC devices and ICT into global healthcare environment.

The special radiation-hardened processors for new highly informative experiments in space

NASA Astrophysics Data System (ADS)

Serdin, O. V.; Antonov, A. A.; Dubrovsky, A. G.; Novogilov, E. A.; Zuev, A. L.

2017-01-01

The article provides a detailed description of the series of special radiation-hardened microprocessor developed by SRISA for use in space technology. The microprocessors have 32-bit and 64-bit KOMDIV architecture with embedded SpaceWire, RapidIO, Ethernet and MIL-STD-1553B interfaces. These devices are used in space telescope GAMMA-400 data acquisition system, and may also be applied to other experiments in space (such as observatory “Millimetron” etc.).

[Physiotherapeutic care marketing research: current state-of-the art].

PubMed

Babaskin, D V

2011-01-01

Successful introduction of modern technologies into the national health care systems strongly depends on the current pharmaceutical market situation. The present article is focused on the peculiarities of marketing research with special reference to physiotherapeutic services and commodities. Analysis of the structure and sequence of marketing research processes is described along with the methods applied for the purpose including their support by the use of Internet resources and technologies.

Laser Based Color Film Recorder System With GaAs Microlaser

NASA Astrophysics Data System (ADS)

Difrancesco, David J.

1989-07-01

In 1984 Pixar's research and development group built and applied to the motion-picture arts at Lucasfilm's ILM facility a three color laser based film scanner/recorder system. The digital film printer is capable of reading and writing 35mm film formats on a variety of film stocks. The system has been used in award-winning special-effects work, and has been operated in a normal production environment since that time. The primary objective was to develop a full color high resolution system, free from scan artifacts, enabling traditionally photographed motion-picture film to be inter-cut with digital raster image photography. Its use is applied to the art of blue-screen traveling-matte cinematography for motion pic-ture special effects. The system was designed using the Pixar Image Computer and conventional gas laser technology as the illumination source. This paper will discuss recent experimental work in the application of GaAs microlaser technology to a digital film printing system of the future.

Identifying emerging trends for implementing learning technology in special education: a state-of-the-art review of selected articles published in 2008-2012.

PubMed

Liu, Gi-Zen; Wu, No-Wei; Chen, Yi-Wen

2013-10-01

As electronic learning (e-learning) becomes increasingly popular in education worldwide, learning technology (LT) has been applied in various learning environments and activities to promote meaningful, efficient, and effective learning. LT has also been adopted by researchers and teacher-practitioners in the field of special education, but as yet little review-based research has been published. This review research thus carefully examined the trends of LT implementations in special education, providing a comprehensive analysis of 26 studies published in indexed journals in the past five years (2008-2012). Two research questions were addressed: (a) What are the major research aims, methodologies, and outcomes in these studies of implementing LT in the field of special education? and (b) What types of LT are mainly used with special education students, and for what kinds of students? Major findings include that examining the learning effectiveness of LT using was the most common research purpose (75%); researchers primarily relied on experimental studies (46%, 12 studies), followed by interviews and questionnaires (19%, 5 studies). Moreover, the most common use of LT was computer-assisted technology (such as web-based mentoring, educational computer games, laptop computers) in special education; studies investigating the use of LT with mentally disabled students were more than those with physically disabled ones. It is expected that the findings of this work and their implications will serve as valuable references with regard to the use of LT with special education students. Copyright © 2013 Elsevier Ltd. All rights reserved.

Interlibrary Lending with Computerized Union Catalogues.

ERIC Educational Resources Information Center

Lehmann, Klaus-Dieter

Interlibrary loans in the Federal Republic of Germany are facilitated by applying techniques of data processing and computer output microfilm (COM) to the union catalogs of the national library system. The German library system consists of two national libraries, four central specialized libraries of technology, medicine, agriculture, and…

Books and monographs on finite element technology

NASA Technical Reports Server (NTRS)

Noor, A. K.

1985-01-01

The present paper proviees a listing of all of the English books and some of the foreign books on finite element technology, taking into account also a list of the conference proceedings devoted solely to finite elements. The references are divided into categories. Attention is given to fundamentals, mathematical foundations, structural and solid mechanics applications, fluid mechanics applications, other applied science and engineering applications, computer implementation and software systems, computational and modeling aspects, special topics, boundary element methods, proceedings of symmposia and conferences on finite element technology, bibliographies, handbooks, and historical accounts.

Collaborative Paradigm of Preventive, Personalized, and Precision Medicine With Point-of-Care Technologies

PubMed Central

2016-01-01

Recent advances in biosensors, medical instrumentation, and information processing and communication technologies (ICT) have enabled significant improvements in healthcare. However, these technologies have been mainly applied in clinical environments, such as hospitals and healthcare facilities, under managed care by well-trained and specialized individuals. The global challenge of providing quality healthcare at affordable cost leads to the proposed paradigm of P reventive, Personalized, and Precision Medicine that requires a seamless use of technology and infrastructure support for patients and healthcare providers at point-of-care (POC) locations including homes, semi or pre-clinical facilities, and hospitals. The complexity of the global healthcare challenge necessitates strong collaborative interdisciplinary synergies involving all stakeholder groups including academia, federal research institutions, industry, regulatory agencies, and clinical communities. It is critical to evolve with collaborative efforts on the translation of research to technology development toward clinical validation and potential healthcare applications. This special issue is focused on technology innovation and translational research for POC applications with potential impact in improving global healthcare in the respective areas. Some of these papers were presented at the NIH-IEEE Strategic Conference on Healthcare Innovations and POC Technologies for Precision Medicine (HI-POCT) held at the NIH on November 9–10, 2015. The papers included in the Special Issue provide a spectrum of critical issues and collaborative resources on translational research of advanced POC devices and ICT into global healthcare environment. PMID:28560119

Communication Teacher-Student-Computer

ERIC Educational Resources Information Center

Tatkovic, Nevenka; Sehanovic, Jusuf; Ruzic, Maja

2006-01-01

The work points out the importance of the use of the information and communication technologies in education. The overview of elementary, advanced and specialized informatics and information related knowledge and skills that every teacher should master and apply in the educational process is presented. Stress is laid upon the importance of the…

Don't Take Marketing for "Grant"ed: Building Marketing Efforts into Library Grant Initiatives

ERIC Educational Resources Information Center

Germain, Carol Anne

2009-01-01

Libraries frequently apply for grants to help fund special projects and resources, such as purchases for library collections, innovative instructional technologies, and research subscription databases. Grants provide support for cultural events, professional development sessions, new construction, and building renovations. Like other library…

34 CFR 403.205 - What are the State's responsibilities for members of special populations?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND... State Vocational and Applied Technology Education Program? § 403.205 What are the State's... decisions that influence the character of programs under the Act affecting their interests; and (b) Provide...

Geothermal as a heat sink application for raising air conditioning efficency

NASA Astrophysics Data System (ADS)

Ibrahim, Hesham Safwat Osman Mohamed

2016-04-01

Objective: Geothermal applications in heating, ventilation, air-conditioning is a US technology for more than 30 years old ,which saves more than 30% average energy cost than the traditional air-conditioning systems systems. Applying this technology in Middle East and African countries would be very feasible specially in Egypt specially as it suffers Electric crisis --The temperature of the condensers and the heat rejecting equipment is much higher than the Egyptian land at different depth which is a great advantages, and must be measured, recorded, and studied accurately -The Far goal of the proposal is to construct from soil analysis a temperature gradient map for Egypt and , African countries on different depth till 100 m which is still unclear nowadays and must be measured and recorded in databases through researches - The main model of the research is to study the heat transfer gradient through the ground earth borehole,grout,high density polyethylene pipes , and water inlet temperature which affect the electric efficiency of the ground source heat pump air conditioning unit Impact on the Region: Such research result will contribute widely in Energy saving sector specially the air conditioning sector in Egypt and the African countries which consumes more than 30% of the electric consumption of the total consumption . and encouraging Green systems such Geothermal to be applied

Specialized project in biophotonics

NASA Astrophysics Data System (ADS)

Garcia Martin, Agueda L.; Sastriques-Silva, Pedro O.; Martinez-Fundora, Julia N.; Augier Calderin, Angel G.; Lopez-Cepero, Xonia

2000-06-01

As science advances, it is more evident the necessity of a health interdisciplinary approach in Medicine. In the case of medical applications of light, the knowledge of the use of dispositives, equipment, diagnostic and treatment means, as well as the bases for the use of this update technologies is required. At the present moment, the outstanding work of specialized professionals of different profiles requires personnel with high professional formation in keeping with the latest trends in science and technology. The authors present here an Specialized Project in Biophotonics, with the aim of increasing the professional preparation of university graduates with an ample profile--physicists and engineers--who work in Biomedical Optics, thus contributing to the specialized formation of medic and paramedic personnel. The course is structured into six-subject-modules and into two phases. As to the basic professional formation, each one attending this course, will select between two variants of the Basic Formation Postgraduate Course: Anatomy and Physiology, Physical Bioenergetics, Clinic Bioenergetics; or Physics in Medicine, Optics and Applied Information Theory, depending on the student's professional profile. In the second phase, the General Formation Postgraduate Course: Biomedical Optics, Optical Bioenergetics and Laser in Medicine.

Modernization of Special Monitoring of Applied Response Technologies (SMART) Technology and Methods - 2014

DTIC Science & Technology

2014-10-01

recommendations that came out of the DWH experience.  The USCG BP Deepwater Horizon Oil Spill Incident Specific Preparedness Review Final Report, January...look at the EPA air monitoring data that was posted the ERMA situation map. The BP Deepwater Horizon Oil Spill Incident Specific Preparedness Review...incidents:  M/V New Carissa Grounding, 1999 (in-situ burning)  Eugene Island Pipeline Spill , 2009 (dispersant)  T/V Krymsk Oil Spill , 2009

Review of NASA programs in applying aerospace technology to energy

NASA Technical Reports Server (NTRS)

Schwenk, F. C.

1981-01-01

NASA's role in energy research and development, with the aid of aerospace technology, is reviewed. A brief history, which began in 1974 with studies of solar energy systems on earth, is presented, and the major energy programs, consisting of over 60 different projects, are described, and include solar terrestrial systems, conservation and fossil energy systems, and space utilization systems. Special attention is given to the Satellite Power System and the isolation of nuclear wastes in space. Emerging prospects for NASA programs in energy technology include bioenergy, and ocean thermal energy conversion, coal extraction and conversion technologies, and support to the nuclear industry in power plant systems safety.

Recent advances in inkjet dispensing technologies: applications in drug discovery.

PubMed

Zhu, Xiangcheng; Zheng, Qiang; Yang, Hu; Cai, Jin; Huang, Lei; Duan, Yanwen; Xu, Zhinan; Cen, Peilin

2012-09-01

Inkjet dispensing technology is a promising fabrication methodology widely applied in drug discovery. The automated programmable characteristics and high-throughput efficiency makes this approach potentially very useful in miniaturizing the design patterns for assays and drug screening. Various custom-made inkjet dispensing systems as well as specialized bio-ink and substrates have been developed and applied to fulfill the increasing demands of basic drug discovery studies. The incorporation of other modern technologies has further exploited the potential of inkjet dispensing technology in drug discovery and development. This paper reviews and discusses the recent developments and practical applications of inkjet dispensing technology in several areas of drug discovery and development including fundamental assays of cells and proteins, microarrays, biosensors, tissue engineering, basic biological and pharmaceutical studies. Progression in a number of areas of research including biomaterials, inkjet mechanical systems and modern analytical techniques as well as the exploration and accumulation of profound biological knowledge has enabled different inkjet dispensing technologies to be developed and adapted for high-throughput pattern fabrication and miniaturization. This in turn presents a great opportunity to propel inkjet dispensing technology into drug discovery.

What is Technical English, American Style?

ERIC Educational Resources Information Center

Sims, Diana Mae

The rise of American English as the medium for exhange of scientific and technical information worldwide is a linguistic phenomenon. For some time, applied linguists in Britain have provided texts to meet the demand for English for special purposes and English for science and technology. Their works use a British form of language and cover British…

An Exploratory Study Using Science eTexts with Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Knight, Victoria F.; Wood, Charles L.; Spooner, Fred; Browder, Diane M.; O'Brien, Christopher P.

2015-01-01

Supported electronic text (eText), or text altered to provide support, may promote comprehension of science content for students with disabilities. According to the Center for Applied Special Technology, Book Builder™ uses supported eText to promote reading for meaning for all students. Students with autism spectrum disorder experience difficulty…

76 FR 80952 - Request for Nominations for Voting Members on a Public Advisory Committee; Food Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... life science, food science, risk assessment, nutrition, food technology, molecular biology, and other... chemistry or food science to serve on the Food Advisory Committee, Center for Food Safety and Applied Nutrition, Office of Regulations, Policy, and Social Sciences. FDA has a special interest in ensuring that...

Mapping Curriculum Innovation in STEM Schools to Assessment Requirements: Tensions and Dilemmas

ERIC Educational Resources Information Center

Tan, Aik-Ling; Leong, Woon Foong

2014-01-01

Specialized science, technology, engineering, and mathematics (STEM) schools create niche areas in an attempt to attract the best students, establish the school status, and justify their privilege to valuable resources. One Singapore STEM school does this in applied science learning to differentiate its curriculum from the national prescribed…

Validity Evidence in Accommodations for English Language Learners and Students with Disabilities

ERIC Educational Resources Information Center

Camara, Wayne

2009-01-01

The five papers in this special issue of the "Journal of Applied Testing Technology" address fundamental issues of validity when tests are modified or accommodations are provided to English Language Learners (ELL) or students with disabilities. Three papers employed differential item functioning (DIF) and factor analysis and found the…

No More Excuses: New Research on Assessing Students with Disabilities

ERIC Educational Resources Information Center

Sireci, Stephen G.

2009-01-01

The articles in this special issue of the "Journal of Applied Testing Technology" represent significant steps forward in the area of evaluating the validity of methods for assessing the educational achievement of students with disabilities. The studies address some of the most difficult student groups to assess--students with learning…

Introduction for the special issue on recent advances in drug delivery across tissue barriers.

PubMed

Mrsny, Randall J; Brayden, David J

2016-01-01

This special issue of Tissue Barriers contains a series of reviews with the common theme of how biological barriers established at epithelial tissues limit the uptake of macromolecular therapeutics. By improving our functional understanding of these barriers, the majority of the authors have highlighted potential strategies that might be applied to the non-invasive delivery of biopharmaceuticals that would otherwise require an injection format for administration. Half of the articles focus on the potential of particular technologies to assist oral delivery of peptides, proteins and other macromolecules. These include use of prodrug chemistry to improve molecule stability and permeability, and the related potential for oral delivery of poorly permeable agents by cell-penetrating peptides and dendrimers. Safety aspects of intestinal permeation enhancers are discussed, along with the more recent foray into drug-device combinations as represented by intestinal microneedles and externally-applied ultrasound. Other articles highlight the crossover between food research and oral delivery based on nanoparticle technology, while the final one provides a fascinating interpretation of the physiological problems associated with subcutaneous insulin delivery and how inefficient it is at targeting the liver.

Technological Progress: A Function of User Necessity

NASA Technical Reports Server (NTRS)

Shkolyar, Svetlana

2007-01-01

Conducting the myriad of space launch preparations more effectively with specialized tools that improve existing processes or address new issues requires innovative technologies. Although the mission of the Applied Physics Lab at NASA's Kennedy Space Center is to deliver gadgets to support these launch missions and operations, it is the verdict of the end users of these technologies that dictates which ones succeed and are used. There have been over total 40 pieces of hardware developed at the APL to assist the safety, efficiency, and cost of shuttle program operations in the 19 years of the lab's operation.

Artillery ammunition marking tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weil, B.S.; Lewis, J.C.

1995-04-01

This report describes the testing results of two approaches being considered for marking ink artillery ammunition with machine-readable data symbols. The first approach used ink-jet printing directly onto projectiles, and the second approach employed thermal-transfer printing onto self-adhesive labels that are subsequently applied automatically to projectiles. The objectives of this evaluation for each marking technology were to (1) determine typical system performance characteristics using the best commercially available equipment and (2) identify any special requirements necessary for handling ammunition when these technologies are employed.

3D Encoding of Musical Score Information and the Playback Method Used by the Cellular Phone

NASA Astrophysics Data System (ADS)

Kubo, Hitoshi; Sugiura, Akihiko

Recently, 3G cellular phone that can take a movie has spread by improving the digital camera function. And, 2Dcode has accurate readout and high operability. And it has spread as an information transmission means. However, the symbol is expanded and complicated when information of 2D codes increases. To solve these, 3D code was proposed. But it need the special equipment for readout, and specializes in the enhancing reality feeling technology. Therefore, it is difficult to apply it to the cellular phone. And so, we propose 3D code that can be recognized by the movie shooting function of the cellular phone. And, score information was encoded. We apply Gray Code to the property of music, and encode it. And the effectiveness was verified.

Final Technical Report Laramie County Community College: Utility-Scale Wind Energy Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas P. Cook

The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technologymore » curriculum.« less

Investigation of the laser engineered net shaping process for nanostructured cermets

NASA Astrophysics Data System (ADS)

Xiong, Yuhong

Laser Engineered Net Shaping (LENSRTM) is a solid freeform fabrication (SFF) technology that combines high power laser deposition and powder metallurgy technologies. The LENSRTM technology has been used to fabricate a number of metallic alloys with improved physical and mechanical material properties. The successful application provides a motivation to also apply this method to fabricate non-metallic alloys, such as tungsten carbide-cobalt (WC-Co) cermets in a timely and easy way. However, reports on this topic are very limited. In this work, the LENSRTM technology was used to investigate its application to nanostructured WC-Co cermets, including processing conditions, microstructural evolution, thermal behavior, mechanical properties, and environmental and economic benefits. Details of the approaches are described as follows. A comprehensive analysis of the relationships between process parameters, microstructural evolution and mechanical properties was conducted through various analytical techniques. Effects of process parameters on sample profiles and microstructures were analyzed. Dissolution, shape change and coarsening of WC particles were investigated to study the mechanisms of microstructural evolution. The thermal features were correlated with the microstructure and mechanical properties. The special thermal behavior during this process and its relevant effects on the microstructure have been experimentally studied and numerically simulated. A high-speed digital camera was applied to study the temperature profile, temperature gradient and cooling rate in and near the molten pool. Numerical modeling was employed for 3D samples using finite element method with ADINA software for the first time. The validated modeling results were used to interpret microstructural evolution and thermal history. In order to fully evaluate the capability of the LENSRTM technology for the fabrication of cermets, material properties of WC-Co cermets produced by different powder metallurgy technologies were compared. In addition, another cermet system, nanostructured titanium/tungsten carbide-nickel ((Ti,W)C-Ni) powder, prepared using high-energy ball milling process, was also deposited by the LENSRTM technology. Because of the near net shape feature of the LENSRTM process, special emphasis was also placed on its potential environmental and economic benefits by applying life cycle assessment (LCA) and technical cost modeling (TCM). Comparisons were conducted between the conventional powder metallurgy processes and the LENSRTM process.

36 CFR 1236.28 - What additional requirements apply to the selection and maintenance of electronic records storage...

Code of Federal Regulations, 2010 CFR

2010-07-01

... storage libraries and test or evaluation areas that contain permanent or unscheduled records must be smoke... the National Institute of Standards and Technology (NIST) Special Publication 500-252, Care and... to discover and correct the causes of data loss. In magnetic computer tape libraries with 1800 or...

A Multimedia Program Combining Special Purposes Italian with the Study of the Italian Economy.

ERIC Educational Resources Information Center

Calvi, Licia; Geerts, Walter

This paper describes the first phase of a project that applies multimedia and hypermedia technology to the study of modern languages. The approach differs from taditional ones in that language is not viewed from a conversational or grammatical perspective but through scenarios imitating the contexts of natural language use. In this phase, the…

Synthetic Fabrication of Nanoscale MoS2-Based Transition Metal Sulfides

PubMed Central

Wang, Shutao; An, Changhua; Yuan, Jikang

2010-01-01

Transition metal sulfides are scientifically and technologically important materials. This review summarizes recent progress on the synthetic fabrication of transition metal sulfides nanocrystals with controlled shape, size, and surface functionality. Special attention is paid to the case of MoS2 nanoparticles, where organic (surfactant, polymer), inorganic (support, promoter, doping) compounds and intercalation chemistry are applied.

Evaluating Learning Management System (LMS)-Facilitated Delivery of Universal Design for Learning (UDL)

ERIC Educational Resources Information Center

Bryans Bongey, Sarah

2012-01-01

This quantitative study involved 157 students in two sections of an undergraduate class in general biology, as well as one instructor who taught both sections of the course. It used resources from the Center for Applied Special Technologies (CAST) to evaluate the viability of a Learning Management System (LMS) to provide Universal Design for…

Russian-English Dictionary of Cybernetics and Computer Technology.

ERIC Educational Resources Information Center

Holland, Wade B.

This work contains over 5,350 terms which have special or unique definition when applied in a cybernetic context. Corrections and improvements to the first edition of the dictionary have been made in this second edition. Entries are made for terms encountered in the Soviet cybernetic literature, without any attempt to define the field or to…

Manufacturing technology and application of hemp cigarette paper with dense ash integration

NASA Astrophysics Data System (ADS)

Yao, Yu; Jian-bo, Zhan; Hao, Wan; Ying, Zhang; Li-wei, Li; Jiang, Yu; Ting-ting, Yu; Jiao, Xie; Bao-shan, Yue

2017-04-01

Cigarette paper, as one of the significant materials used for combustion, has special and direct influence on the smoke, also directly influencing the ash appearance of cigarettes before and after combustion. In this paper, full hemp cigarette paper was prepared through creative beating and mixing slurry technology, and the advantages of the preparation process were analyzed. Full hemp cigarette paper was creatively applied to the preparation and verification of slim cigarettes, and the ash integration effect in the process of burning and its influence on whiteness were verified. At the same time, the physical and chemical indexes of cigarette paper were tested and studied, and sensory evaluation was applied to verify the effect of cigarette paper on sensory quality.

EDITORIAL: Non-thermal plasma-assisted fuel conversion for green chemistry Non-thermal plasma-assisted fuel conversion for green chemistry

NASA Astrophysics Data System (ADS)

Nozaki, Tomohiro; Gutsol, Alexander

2011-07-01

This special issue is based on the symposium on Non-thermal Plasma Assisted Fuel Conversion for Green Chemistry, a part of the 240th ACS National Meeting & Exposition held in Boston, MA, USA, 22-26 August 2010. Historically, the Division of Fuel Chemistry of the American Chemical Society (ACS) has featured three plasma-related symposia since 2000, and has launched special issues in Catalysis Today on three occasions: 'Catalyst Preparation using Plasma Technologies', Fall Meeting, Washington DC, USA, 2000. Special issue in Catalysis Today 72 (3-4) with 12 peer-reviewed articles. 'Plasma Technology and Catalysis', Spring Meeting, New Orleans, LA, USA, 2003. Special issue in Catalysis Today 89 (1-2) with more than 30 peer-reviewed articles. 'Utilization of Greenhouse Gases II' (partly focused on plasma-related technologies), Spring Meeting, Anaheim, CA, USA, 2004. Special issue in Catalysis Today 98 (4) with 25 peer-reviewed articles. This time, selected presentations are published in this Journal of Physics D: Applied Physics special issue. An industrial material and energy conversion technology platform is established on thermochemical processes including various catalytic reactions. Existing industry-scale technology is already well established; nevertheless, further improvement in energy efficiency and material saving has been continuously demanded. Drastic reduction of CO2 emission is also drawing keen attention with increasing recognition of energy and environmental issues. Green chemistry is a rapidly growing research field, and frequently highlights renewable bioenergy, bioprocesses, solar photocatalysis of water splitting, and regeneration of CO2 into useful chemicals. We would also like to emphasize 'plasma catalysis' of hydrocarbon resources as an important part of the innovative next-generation green technologies. The peculiarity of non-thermal plasma is that it can generate reactive species almost independently of reaction temperature. Plasma-generated reactive species are used to initiate chemical reactions at unexpectedly lower temperatures than conventional thermochemical reactions, leading to non-equilibrium product distribution or creating unconventional reaction pathways. When non-thermal plasma is combined with catalysts, a synergistic effect is frequently observed. Such unique properties of non-thermal plasma are expected to contribute excellent control over process parameters that meet the need for energy saving, environment protection, and material preservation. This special issue consists of eleven peer-reviewed papers including two invited publications. Professors Alexander Fridman and Alexander Rabinovich from Drexel University, and Dr Gutsol from the Chevron Energy Technology Company present a critical review of various industry-oriented practical plasma fuel conversion processes. Professor Richard Mallinson from University of Oklahoma describes his recent project on E85 (85%-ethanol/15%-gasoline) upgrading using non-thermal plasma and catalyst hybrid reactor, and highlights the synergistic effect on fuel conversion processes. Other papers focus on plasma/catalyst hybrid reactions for methane dry (CO2) reforming, plasma synthesis of carbon suboxide polymer from CO, the gas-to-liquid (GTL) process using a non-thermal plasma-combined micro-chemical reactor, and molecular beam characterization of plasma-generated reactive species. Much research regarding plasma catalysis is ongoing worldwide, but there is plenty of room for further development of plasma fuel processing, which could eventually provide a viable and flexible solution in future energy and material use. Finally, we would like to thank all symposium participants for their active discussion. We appreciate the sponsorship of the Division of Fuel Chemistry of the American Chemical Society. We express special thanks to the program chair of the Fuel Chemistry Division, Professor Chang-jun Liu at Tianjin University, for his dedication to the success of the symposium. We particularly express our appreciation to the Editorial Board of Journal of Physics D: Applied Physics for publication of the special issue.

Surface-structured diffuser by iterative down-size molding with glass sintering technology.

PubMed

Lee, Xuan-Hao; Tsai, Jung-Lin; Ma, Shih-Hsin; Sun, Ching-Cherng

2012-03-12

In this paper, a down-size sintering scheme for making high-performance diffusers with micro structure to perform beam shaping is presented and demonstrated. By using down-size sintering method, a surface-structure film is designed and fabricated to verify the feasibility of the sintering technology, in which up to 1/8 dimension reduction has been achieved. Besides, a special impressing technology has been applied to fabricate diffuser film with various materials and the transmission efficiency is as high as 85% and above. By introducing the diffuser into possible lighting applications, the diffusers have been shown high performance in glare reduction, beam shaping and energy saving.

Summary of the Geocarto International Special Issue on "NASA Earth Science Satellite Data for Applications to Public Health" to be Published in Early 2014

NASA Technical Reports Server (NTRS)

Quattrochi, Dale A.

2013-01-01

At the 2011 Applied Science Public Health review held in Santa Fe, NM, it was announced that Dr. Dale Quattrochi from the NASA Marshall Space Flight Center, John Haynes, Program Manager for the Applied Sciences Public Health program at NASA Headquarters, and Sue Estes, Deputy Program Manager for the NASA Applied Sciences Public Health Program located at the Universities Space Research Association (USRA) at the National Space Science and Technology Center (NSSTC) in Huntsville, AL, would edit a special issue of the journal Geocarto International on "NASA Earth Science Satellite Data for Applications to Public Health". This issue would be focused on compiling research papers that use NASA Earth Science satellite data for applications to public health. NASA's Public Health Program concentrates on advancing the realization of societal and economic benefits from NASA Earth Science in the areas of infectious disease, emergency preparedness and response, and environmental health (e.g., air quality). This application area as a focus of the NASA Applied Sciences program, has engaged public health institutions and officials with research scientists in exploring new applications of Earth Science satellite data as an integral part of public health decision- and policy-making at the local, state and federal levels. Of interest to this special issue are papers submitted on are topics such as epidemiologic surveillance in the areas of infectious disease, environmental health, and emergency response and preparedness, national and international activities to improve skills, share data and applications, and broaden the range of users who apply Earth Science satellite data in public health decisions, or related focus areas.. This special issue has now been completed and will be published n early 2014. This talk will present an overview of the papers that will be published in this special Geocarto International issue.

Back-to-School Special Education Technology Resource Guide.

ERIC Educational Resources Information Center

Edyburn, Dave L., Ed.

1990-01-01

This newsletter special issue provides a compendium of information, strategies, and resources concerning the use of technology by individuals with special needs. A section on strategies for the effective use of technology contains the following papers: "A Philosophy for the Use of Technology in Special Education" (A. Edward Blackhurst…

Technology-enhanced Interactive Teaching of Marginal, Joint and Conditional Probabilities: The Special Case of Bivariate Normal Distribution

PubMed Central

Dinov, Ivo D.; Kamino, Scott; Bhakhrani, Bilal; Christou, Nicolas

2014-01-01

Summary Data analysis requires subtle probability reasoning to answer questions like What is the chance of event A occurring, given that event B was observed? This generic question arises in discussions of many intriguing scientific questions such as What is the probability that an adolescent weighs between 120 and 140 pounds given that they are of average height? and What is the probability of (monetary) inflation exceeding 4% and housing price index below 110? To address such problems, learning some applied, theoretical or cross-disciplinary probability concepts is necessary. Teaching such courses can be improved by utilizing modern information technology resources. Students’ understanding of multivariate distributions, conditional probabilities, correlation and causation can be significantly strengthened by employing interactive web-based science educational resources. Independent of the type of a probability course (e.g. majors, minors or service probability course, rigorous measure-theoretic, applied or statistics course) student motivation, learning experiences and knowledge retention may be enhanced by blending modern technological tools within the classical conceptual pedagogical models. We have designed, implemented and disseminated a portable open-source web-application for teaching multivariate distributions, marginal, joint and conditional probabilities using the special case of bivariate Normal distribution. A real adolescent height and weight dataset is used to demonstrate the classroom utilization of the new web-application to address problems of parameter estimation, univariate and multivariate inference. PMID:25419016

Technology-enhanced Interactive Teaching of Marginal, Joint and Conditional Probabilities: The Special Case of Bivariate Normal Distribution.

PubMed

Dinov, Ivo D; Kamino, Scott; Bhakhrani, Bilal; Christou, Nicolas

2013-01-01

Data analysis requires subtle probability reasoning to answer questions like What is the chance of event A occurring, given that event B was observed? This generic question arises in discussions of many intriguing scientific questions such as What is the probability that an adolescent weighs between 120 and 140 pounds given that they are of average height? and What is the probability of (monetary) inflation exceeding 4% and housing price index below 110? To address such problems, learning some applied, theoretical or cross-disciplinary probability concepts is necessary. Teaching such courses can be improved by utilizing modern information technology resources. Students' understanding of multivariate distributions, conditional probabilities, correlation and causation can be significantly strengthened by employing interactive web-based science educational resources. Independent of the type of a probability course (e.g. majors, minors or service probability course, rigorous measure-theoretic, applied or statistics course) student motivation, learning experiences and knowledge retention may be enhanced by blending modern technological tools within the classical conceptual pedagogical models. We have designed, implemented and disseminated a portable open-source web-application for teaching multivariate distributions, marginal, joint and conditional probabilities using the special case of bivariate Normal distribution. A real adolescent height and weight dataset is used to demonstrate the classroom utilization of the new web-application to address problems of parameter estimation, univariate and multivariate inference.

34 CFR Appendix A to Part 403 - Examples for 34 CFR 403.111(a) and 403.111(c)(3)

Code of Federal Regulations, 2010 CFR

2010-07-01

...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY... participation in the course, a local educational agency may use funds awarded under § 403.112 as needed to... education programs, to parents of students who are members of special populations in a local educational...

Software and knowledge engineering aspects of smart homes applied to health.

PubMed

Augusto, Juan Carlos; Nugent, Chris; Martin, Suzanne; Olphert, Colin

2005-01-01

Smart Home technology offers a viable solution to the increasing needs of the elderly, special needs and home based-healthcare populations. The research to date has largely focused on the development of communication technologies, sensor technologies and intelligent user interfaces. We claim that this technological evolution has not been matched with a step of a similar size on the software counterpart. We particularly focus on the software that emphasizes the intelligent aspects of a Smart Home and the difficulties that arise from the computational analysis of the information collected from a Smart Home. The process of translating information into accurate diagnosis when using non-invasive technology is full of challenges, some of which have been considered in the literature to some extent but as yet without clear landmarks.

[Complex treatment of patients with cholangiogenic hepatic abscess].

PubMed

Nychytaĭlo, M Iu; Skums, A V; Medvets'kyĭ, Ie B; Ohorodnyk, P V; Mashkovs'kyĭ, H Iu; Shkarban, V P; Shkarban, P O; Farzolakh, Mekhraban Jafarlu

2005-07-01

Results of treatment of 47 patients with cholangiogenic hepatic abscess were analyzed. Clinical, laboratory and special methods of investigation were applied for diagnosis. The authors consider ultrasound investigation (USI), computer tomography and the abscess puncture under the USI control with subsequent cytological and bacterial control the decisive methods in diagnosis of hepatic abscess. In complex of treatment of patients miniinvasive technologies were applied--the abscess puncture, its cavity drainage under USI control transcutaneus transhepatic cholangiostomy, endoscopic papillosphincterotomy with lithotripsy and nasobiliary drainage, according to indications. Efficacy of the abscess cavity sanation, using miramistinum and decasan, was proved. In general therapy the directed transport of medicines was applied.

Coordinated development of leading biomass pretreatment technologies.

PubMed

Wyman, Charles E; Dale, Bruce E; Elander, Richard T; Holtzapple, Mark; Ladisch, Michael R; Lee, Y Y

2005-12-01

For the first time, a single source of cellulosic biomass was pretreated by leading technologies using identical analytical methods to provide comparative performance data. In particular, ammonia explosion, aqueous ammonia recycle, controlled pH, dilute acid, flowthrough, and lime approaches were applied to prepare corn stover for subsequent biological conversion to sugars through a Biomass Refining Consortium for Applied Fundamentals and Innovation (CAFI) among Auburn University, Dartmouth College, Michigan State University, the National Renewable Energy Laboratory, Purdue University, and Texas A&M University. An Agricultural and Industrial Advisory Board provided guidance to the project. Pretreatment conditions were selected based on the extensive experience of the team with each of the technologies, and the resulting fluid and solid streams were characterized using standard methods. The data were used to close material balances, and energy balances were estimated for all processes. The digestibilities of the solids by a controlled supply of cellulase enzyme and the fermentability of the liquids were also assessed and used to guide selection of optimum pretreatment conditions. Economic assessments were applied based on the performance data to estimate each pretreatment cost on a consistent basis. Through this approach, comparative data were developed on sugar recovery from hemicellulose and cellulose by the combined pretreatment and enzymatic hydrolysis operations when applied to corn stover. This paper introduces the project and summarizes the shared methods for papers reporting results of this research in this special edition of Bioresource Technology.

Night vision and electro-optics technology transfer, 1972 - 1981

NASA Astrophysics Data System (ADS)

Fulton, R. W.; Mason, G. F.

1981-09-01

The purpose of this special report, 'Night Vision and Electro-Optics Technology Transfer 1972-1981,' is threefold: To illustrate, through actual case histories, the potential for exploiting a highly developed and available military technology for solving non-military problems. To provide, in a layman's language, the principles behind night vision and electro-optical devices in order that an awareness may be developed relative to the potential for adopting this technology for non-military applications. To obtain maximum dollar return from research and development investments by applying this technology to secondary applications. This includes, but is not limited to, applications by other Government agencies, state and local governments, colleges and universities, and medical organizations. It is desired that this summary of Technology Transfer activities within Night Vision and Electro-Optics Laboratory (NV/EOL) will benefit those who desire to explore one of the vast technological resources available within the Defense Department and the Federal Government.

The name-locator guide: A new resource for technology transfer

NASA Technical Reports Server (NTRS)

Clingman, W. H.

1974-01-01

A new transfer mechanism to facilitate technology transfer between aerospace technology and nonaerospace industries, was proposed with the following sequence of steps. First, the key technical problems in a given industry would be analyzed. The analysis will define the characteristics which relevant technology will have. Second, a limited list of subject terms will be developed using words familiar to those working in the industry. It is these which will be applied in subsequent steps to the NASA technology and used to locate technology relevant to a specific problem in the industry. Third, for each Required Technology Program, terms applicable to that program would be chosen from this list. Fourth, a name-locator guide would be provided to the Regional Dissemination Centers. This guide would be analogous to an index. The key words would be chosen from the special subject term list for the given industry.

Energy efficiency of high-rise buildings

NASA Astrophysics Data System (ADS)

Zhigulina, Anna Yu.; Ponomarenko, Alla M.

2018-03-01

The article is devoted to analysis of tendencies and advanced technologies in the field of energy supply and energy efficiency of tall buildings, to the history of the emergence of the concept of "efficiency" and its current interpretation. Also the article show the difference of evaluation criteria of the leading rating systems LEED and BREEAM. Authors reviewed the latest technologies applied in the construction of energy efficient buildings. Methodological approach to the design of tall buildings taking into account energy efficiency needs to include the primary energy saving; to seek the possibility of production and accumulation of alternative electric energy by converting energy from the sun and wind with the help of special technical devices; the application of regenerative technologies.

Sounding rocket thermal analysis techniques applied to GAS payloads. [Get Away Special payloads (STS)

NASA Technical Reports Server (NTRS)

Wing, L. D.

1979-01-01

Simplified analytical techniques of sounding rocket programs are suggested as a means of bringing the cost of thermal analysis of the Get Away Special (GAS) payloads within acceptable bounds. Particular attention is given to two methods adapted from sounding rocket technology - a method in which the container and payload are assumed to be divided in half vertically by a thermal plane of symmetry, and a method which considers the container and its payload to be an analogous one-dimensional unit having the real or correct container top surface area for radiative heat transfer and a fictitious mass and geometry which model the average thermal effects.

Technology and Interactive Multimedia. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Ashton, Ray

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the role of interactive multimedia, especially the digital, optical compact disc technologies, in providing instructional services to special education students. An overview identifies technological and economic trends,…

Impact of a transposon insertion in phzF2 on the specialized metabolite production and interkingdom interactions of Pseudomonas aeruginosa.

PubMed

Phelan, Vanessa V; Moree, Wilna J; Aguilar, Julieta; Cornett, Dale S; Koumoutsi, Alexandra; Noble, Suzanne M; Pogliano, Kit; Guerrero, Carlos A; Dorrestein, Pieter C

2014-05-01

In microbiology, gene disruption and subsequent experiments often center on phenotypic changes caused by one class of specialized metabolites (quorum sensors, virulence factors, or natural products), disregarding global downstream metabolic effects. With the recent development of mass spectrometry-based methods and technologies for microbial metabolomics investigations, it is now possible to visualize global production of diverse classes of microbial specialized metabolites simultaneously. Using imaging mass spectrometry (IMS) applied to the analysis of microbiology experiments, we can observe the effects of mutations, knockouts, insertions, and complementation on the interactive metabolome. In this study, a combination of IMS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to visualize the impact on specialized metabolite production of a transposon insertion into a Pseudomonas aeruginosa phenazine biosynthetic gene, phzF2. The disruption of phenazine biosynthesis led to broad changes in specialized metabolite production, including loss of pyoverdine production. This shift in specialized metabolite production significantly alters the metabolic outcome of an interaction with Aspergillus fumigatus by influencing triacetylfusarinine production.

Impact of a Transposon Insertion in phzF2 on the Specialized Metabolite Production and Interkingdom Interactions of Pseudomonas aeruginosa

PubMed Central

Phelan, Vanessa V.; Moree, Wilna J.; Aguilar, Julieta; Cornett, Dale S.; Koumoutsi, Alexandra; Noble, Suzanne M.; Pogliano, Kit; Guerrero, Carlos A.

2014-01-01

In microbiology, gene disruption and subsequent experiments often center on phenotypic changes caused by one class of specialized metabolites (quorum sensors, virulence factors, or natural products), disregarding global downstream metabolic effects. With the recent development of mass spectrometry-based methods and technologies for microbial metabolomics investigations, it is now possible to visualize global production of diverse classes of microbial specialized metabolites simultaneously. Using imaging mass spectrometry (IMS) applied to the analysis of microbiology experiments, we can observe the effects of mutations, knockouts, insertions, and complementation on the interactive metabolome. In this study, a combination of IMS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to visualize the impact on specialized metabolite production of a transposon insertion into a Pseudomonas aeruginosa phenazine biosynthetic gene, phzF2. The disruption of phenazine biosynthesis led to broad changes in specialized metabolite production, including loss of pyoverdine production. This shift in specialized metabolite production significantly alters the metabolic outcome of an interaction with Aspergillus fumigatus by influencing triacetylfusarinine production. PMID:24532776

Wireless infrared communications for space and terrestrial applications

NASA Technical Reports Server (NTRS)

Crimmins, James W.

1993-01-01

Voice and data communications via wireless (and fiberless) optical means has been commonplace for many years. However, continuous advances in optoelectronics and microelectronics have resulted in significant advances in wireless optical communications over the last decade. Wilton has specialized in diffuse infrared voice and data communications since 1979. In 1986, NASA Johnson Space Center invited Wilton to apply its wireless telecommunications and factory floor technology to astronaut voice communications aboard the shuttle. In September, 1988 a special infrared voice communications system flew aboard a 'Discovery' Shuttle mission as a flight experiment. Since then the technology has been further developed, resulting in a general purpose of 2Mbs wireless voice/data LAN which has been tested for a variety of applications including use aboard Spacelab. Funds for Wilton's wireless IR development were provided in part by NASA's Technology Utilization Office and by the NASA Small Business Innovative Research Program. As a consequence, Wilton's commercial product capability has been significantly enhanced to include diffuse infrared wireless LAN's as well as wireless infrared telecommunication systems for voice and data.

PREFACE: 11th European Conference on Applied Superconductivity (EUCAS2013)

NASA Astrophysics Data System (ADS)

Farinon, Stefania; Pallecchi, Ilaria; Malagoli, Andrea; Lamura, Gianrico

2014-05-01

During the 11th edition of the European Conference on Applied Superconductivity, successfully held in Genoa from 15-19 September 2013, more than one thousand participants from over 40 countries were registered and contributions of 7 plenary lectures, 23 invited talks, 203 oral talks and 550 posters were presented. The present issue of Journal of Physics: Conference Series (JPCS) collects the 218 submitted papers that were peer reviewed and accepted in the Conference Proceedings. Similarly to the Superconductor Science and Technology Special issue: ''EUCAS 11th European Conference on Applied Superconductivity'' which contains some plenary and invited contributions, as well as some selected contributions, in this issue the papers are sorted according to the four traditional topics of interest of EUCAS, namely Materials (56 papers), Wires and Tapes (47 papers), Large Scale Applications (64 papers) and Electronics (51 papers). While the it Superconductors Science and Technology special issue focuses on the scientific and technological highlights of the conference, this collection provides an overall view of the worldwide research activity on applied superconductivity, mirroring the main guidelines and the hottest issues, which range from basic studies on newly discovered superconducting compounds to the state-of-the-art advances in large scale applications, wires and tapes fabrication and electronics. We would like to point out that, among the JPCS contributions, six papers present works financed by ongoing EU-Japan projects, three papers belong to the session on junctions and SQUIDs dedicated to the memory of Antonio Barone and one paper belongs to the session on pinning and flux dynamics dedicated to the memory of John Clem. Finally, we would like to thank all the people whose careful work contributed to the preparation of this JPCS issue, in particular the session chairs as well as the peer reviewers. The Editors Stefania Farinon (Editor in Chief, Large Scale), Ilaria Pallecchi (Materials), Andrea Malagoli (Wires and Tapes), and Gianrico Lamura (Electronics)

In-home monitoring of persons with dementia: ethical guidelines for technology research and development.

PubMed

Mahoney, Diane F; Purtilo, Ruth B; Webbe, Frank M; Alwan, Majd; Bharucha, Ashok J; Adlam, Tim D; Jimison, Holly B; Turner, Beverly; Becker, S Ann

2007-07-01

Innovative technologies are rapidly emerging that offer caregivers the support and means to assist older adults with cognitive impairment to continue living "at home." Technology research and development efforts applied to older adults with dementia invoke special grant review and institutional review board concerns, to ensure not only safe but also ethically appropriate interventions. Evidence is emerging, however, that tensions are growing between innovators and reviewers. Reviewers with antitechnology biases are in a position to stifle needed innovation. Technology developers who fail to understand the clinical and caregiving aspects of dementia may design applications that are not in alignment with users' capabilities. To bridge this divide, we offer an analysis of the ethical issues surrounding home monitoring, a model framework, and ethical guidelines for technology research and development for persons with Alzheimer's disease and their caregivers.

Future superconductivity applications in space - A review

NASA Astrophysics Data System (ADS)

Krishen, Kumar; Ignatiev, Alex

High temperature superconductor (HISC) materials and devices can provide immediate applications for many space missions. The in-space thermal environment provides an opportunity to develop, test, and apply this technology to enhance performance and reliability for many applications of crucial importance to NASA. Specifically, the technology development areas include: (1) high current power transmission, (2) microwave components, devices, and antennas, (3) microwave, optical, and infrared sensors, (4) signal processors, (5) submillimeter wave components and systems, (6) ultra stable space clocks, (7) electromagnetic launch systems, and (8) accelerometers and position sensors for flight operations. HTSC is expected to impact NASA's Lunar Bases, Mars exploration, Mission to Earth, and Planetary exploration programs providing enabling and cost-effect technology. A review of the space applications of the HTSC technology is presented. Problem areas in technology development needing special attention are identified.

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

PubMed Central

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-01-01

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering. PMID:28773924

3D Bioprinting Technologies for Hard Tissue and Organ Engineering.

PubMed

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-09-27

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering.

Evaluating new health information technologies: expanding the frontiers of health care delivery and health promotion.

PubMed

Kreps, Gary L

2002-01-01

The modern health care system is being irrevocably changed by the development and introduction of new health information technologies (such as health information systems, decision-support tools, specialized websites, and innovative communication devices). While many of these new technologies hold the promise of revolutionizing the modern health system and facilitating improvements in health care delivery, health education, and health promotion, it is imperative to carefully examine and assess the effectiveness of these technological tools to determine which products are most useful to apply in specific contexts, as well as to learn how to best utilize these products and processes. Without good evaluative information about new technologies, we are unlikely to reap the greatest benefits from these powerful new tools. This chapter examines the demand for evaluating health information technologies and suggests several strategies for conducting rigorous and relevant evaluation research.

Nanotechnology and patents in agriculture, food technology, nutrition and medicine - advantages and risks: worldwide patented nano- and absorber particles in food nutrition and agriculture.

PubMed

Benckiser, Gero

2012-12-01

The keywords nanotechnology, super absorber, agriculture, nutrition, and food technology exhibited 28,149 positive matches under more than 68 million patents worldwide. A closer look at the first 500 nanotechnology, agriculture, nutrition and biotechnology related patents, published during 2011-2012, unveiled that 64% are parts of machines and control devices while about 36% comprise metal oxides, fertilizers, pesticides and drugs, which are compounds and often applied in combination with inorganic or organic super absorbing polymeric structures. The latter compounds are in the focus of this special issue.

Science-and-Technology-oriented-Society and Man

NASA Astrophysics Data System (ADS)

Fukui, Ken'ichi

This is a special lecture at the 30th anniversary of JICST. To develop science-and-te chnology-oriented society it is important to evaluate and select infinite information resources on science and technology, and to reorganize and apply them. This also relates to humanity. For the future, we have to establish scientific ethics that can exceed the expedience of science and technology. To be concrete, we have to create new industrial value that recovers and reclaims natural resources which men had wasted so far, and we have to establish a new technology to distribute maldistributed industrial benefits equally. And then, the selfcontrol of the human aiming at the harmony of nature and man will secure human liberty, and it will be done by the good function of man's brain.

Special Education Technology Specialist. Careers in Special Education and Related Services.

ERIC Educational Resources Information Center

National Clearinghouse for Professions in Special Education, Reston, VA.

Designed for high school students interested in careers in special education and related services, this guide outlines the role of the special education technology specialist. It addresses the nature of the work, the education required, personal qualities that technology specialists should have, job outlook and advancement, and how to prepare for…

Process-driven selection of information systems for healthcare

NASA Astrophysics Data System (ADS)

Mills, Stephen F.; Yeh, Raymond T.; Giroir, Brett P.; Tanik, Murat M.

1995-05-01

Integration of networking and data management technologies such as PACS, RIS and HIS into a healthcare enterprise in a clinically acceptable manner is a difficult problem. Data within such a facility are generally managed via a combination of manual hardcopy systems and proprietary, special-purpose data processing systems. Process modeling techniques have been successfully applied to engineering and manufacturing enterprises, but have not generally been applied to service-based enterprises such as healthcare facilities. The use of process modeling techniques can provide guidance for the placement, configuration and usage of PACS and other informatics technologies within the healthcare enterprise, and thus improve the quality of healthcare. Initial process modeling activities conducted within the Pediatric ICU at Children's Medical Center in Dallas, Texas are described. The ongoing development of a full enterprise- level model for the Pediatric ICU is also described.

Combination of preservation factors applied to minimal processing of foods.

PubMed

Tapia de Daza, M S; Alzamora, S M; Chanes, J W

1996-07-01

Innovative technologies for producing minimally processed (MP) foods that apply the concept of combination of preservation factors are addressed in this article with special emphasis on a new combined approach that has been successfully applied in several Latin American countries for MP high-moisture fruit products (HMFP). HMFP can be regarded as a different approach to the commercially available and widely accepted MP concept for fruits and vegetables (even if developed for the same purpose of obtaining freshlike high-quality products with an extended shelf life) that is better adapted to Latin American countries in terms of independence of the chill chain and the use of simple and energy-efficient technologies. The continuous refrigeration hurdle associated with MP refrigerated fruits is not included in the preservation system of HMFP because a different combination of hurdles must be overcome to enhance the shelf stability of nonrespiring vegetable tissues while preserving freshlike character. Guidelines to obtain safe and high-quality MP fruit products are proposed. Other products preserved by combined factors technology are also discussed, as well as some other classical and new preservation factors whose application could enhance the quality of HMFP.

Mobile Learning as Alternative to Assistive Technology Devices for Special Needs Students

ERIC Educational Resources Information Center

Ismaili, Jalal; Ibrahimi, El Houcine Ouazzani

2017-01-01

Assistive Technology (AT) revolutionized the process of learning for special needs students during the past three decades. Thanks to this technology, accessibility and educational inclusion became attainable more than any time in the history of special education. Meanwhile, assistive technology devices remain unreachable for a large number of…

Experience of maintaining laboratory educational website's sustainability

PubMed Central

Dimenstein, Izak B.

2016-01-01

Laboratory methodology websites are specialized niche websites. The visibility of a niche website transforms it into an authority site on a particular “niche of knowledge.” This article presents some ways in which a laboratory methodology website can maintain its sustainability. The optimal composition of the website includes a basic content, a blog, and an ancillary part. This article discusses experimenting with the search engine optimization query results page. Strategic placement of keywords and even phrases, as well as fragmentation of the post's material, can improve the website's visibility to search engines. Hyperlinks open a chain reaction of additional links and draw attention to the previous posts. Publications in printed periodicals are a substantial part of a niche website presence on the Internet. Although this article explores a laboratory website on the basis of our hands-on expertise maintaining “Grossing Technology in Surgical Pathology” (www.grossing-technology.com) website with a high volume of traffic for more than a decade, the recommendations presented here for developing an authority website can be applied to other professional specialized websites. The authority websites visibility and sustainability are preconditions for aggregating them in a specialized educational laboratory portal. PMID:27688928

Experience of maintaining laboratory educational website's sustainability.

PubMed

Dimenstein, Izak B

2016-01-01

Laboratory methodology websites are specialized niche websites. The visibility of a niche website transforms it into an authority site on a particular "niche of knowledge." This article presents some ways in which a laboratory methodology website can maintain its sustainability. The optimal composition of the website includes a basic content, a blog, and an ancillary part. This article discusses experimenting with the search engine optimization query results page. Strategic placement of keywords and even phrases, as well as fragmentation of the post's material, can improve the website's visibility to search engines. Hyperlinks open a chain reaction of additional links and draw attention to the previous posts. Publications in printed periodicals are a substantial part of a niche website presence on the Internet. Although this article explores a laboratory website on the basis of our hands-on expertise maintaining "Grossing Technology in Surgical Pathology" (www.grossing-technology.com) website with a high volume of traffic for more than a decade, the recommendations presented here for developing an authority website can be applied to other professional specialized websites. The authority websites visibility and sustainability are preconditions for aggregating them in a specialized educational laboratory portal.

Guidelines for Design and Test of a Built-In Self Test (BIST) Circuit For Space Radiation Studies of High-Speed IC Technologies

NASA Technical Reports Server (NTRS)

Carts, M. A.; Marshall, P. W.; Reed, R.; Curie, S.; Randall, B.; LaBel, K.; Gilbert, B.; Daniel, E.

2006-01-01

Serial Bit Error Rate Testing under radiation to characterize single particle induced errors in high-speed IC technologies generally involves specialized test equipment common to the telecommunications industry. As bit rates increase, testing is complicated by the rapidly increasing cost of equipment able to test at-speed. Furthermore as rates extend into the tens of billions of bits per second test equipment ceases to be broadband, a distinct disadvantage for exploring SEE mechanisms in the target technologies. In this presentation the authors detail the testing accomplished in the CREST project and apply the knowledge gained to establish a set of guidelines suitable for designing arbitrarily high speed radiation effects tests.

Advancement of X-Ray Microscopy Technology and its Application to Metal Solidification Studies

NASA Technical Reports Server (NTRS)

Kaukler, William F.; Curreri, Peter A.

1996-01-01

The technique of x-ray projection microscopy is being used to view, in real time, the structures and dynamics of the solid-liquid interface during solidification. By employing a hard x-ray source with sub-micron dimensions, resolutions of 2 micrometers can be obtained with magnifications of over 800 X. Specimen growth conditions need to be optimized and the best imaging technologies applied to maintain x-ray image resolution, contrast and sensitivity. It turns out that no single imaging technology offers the best solution and traditional methods like radiographic film cannot be used due to specimen motion (solidification). In addition, a special furnace design is required to permit controlled growth conditions and still offer maximum resolution and image contrast.

Informational technologies in modern educational structure

NASA Astrophysics Data System (ADS)

Fedyanin, A. B.

2017-01-01

The article represents the structure of informational technologies complex that is applied in modern school education, describes the most important educational methods, shows the results of their implementation. It represents the forms and methods of educational process informative support usage, examined in respects of different aspects of their using that take into account also the psychological features of students. A range of anxious facts and dangerous trends connected with the usage and distribution of the informational technologies that are to be taken into account in the educational process of informatization is also indicated in the article. Materials of the article are based on the experience of many years in operation and development of the informational educational sphere on the basis of secondary school of the physics and mathematics specialization.

Incorporating Geographic Information Science in the BSc Environ-mental Science Program in Botswana

NASA Astrophysics Data System (ADS)

Akinyemi, Felicia O.

2018-05-01

Critical human capacity in Geographic Information Science (GISc) is developed at the Botswana International University of Science and Technology, a specialized, research university. Strategies employed include GISc courses offered each semester to students from various programs, the conduct of field-based projects, enrolment in online courses, geo-spatial initiatives with external partners, and final year research projects utilizing geospatial technologies. A review is made of available GISc courses embedded in the Bachelor of Science Environmental Science program. GISc courses are incorporated in three Bachelor degree programs as distinct courses. Geospatial technologies are employed in several other courses. Student researches apply GIS and Remote Sensing methods to environmental and geological themes. The overarching goals are to equip students in various disciplines to utilize geospatial technologies, and enhance their spatial thinking and reasoning skills.

Polished sample preparing and backscattered electron imaging and of fly ash-cement paste

NASA Astrophysics Data System (ADS)

Feng, Shuxia; Li, Yanqi

2018-03-01

In recent decades, the technology of backscattered electron imaging and image analysis was applied in more and more study of mixed cement paste because of its special advantages. Test accuracy of this technology is affected by polished sample preparation and image acquisition. In our work, effects of two factors in polished sample preparing and backscattered electron imaging were investigated. The results showed that increasing smoothing pressure could improve the flatness of polished surface and then help to eliminate interference of morphology on grey level distribution of backscattered electron images; increasing accelerating voltage was beneficial to increase gray difference among different phases in backscattered electron images.

Disruptive Commercial Technologies

DTIC Science & Technology

2008-06-26

with rotating mirrored “ disco ” balls could be used to blind and confuse Marine forces while masking Red positions. COTS polycarbonate first-responder...specialize in small orders” • Active/passive − Magnesium firebreak − Smoke bombs − 2M candlepower IR illuminators aimed at disco balls − IR strobes...and virtual exercises, we must also equip our irregular OPFOR with the tools they would be likely to acquire and apply against us in creative new ways

Feasibility of a special-purpose computer to solve the Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Gritton, E. C.; King, W. S.; Sutherland, I.; Gaines, R. S.; Gazley, C., Jr.; Grosch, C.; Juncosa, M.; Petersen, H.

1978-01-01

Orders-of-magnitude improvements in computer performance can be realized with a parallel array of thousands of fast microprocessors. In this architecture, wiring congestion is minimized by limiting processor communication to nearest neighbors. When certain standard algorithms are applied to a viscous flow problem and existing LSI technology is used, performance estimates of this conceptual design show a dramatic decrease in computational time when compared to the CDC 7600.

Direct laser writing of auxetic structures: present capabilities and challenges

NASA Astrophysics Data System (ADS)

Hengsbach, Stefan; Díaz Lantada, Andrés

2014-08-01

Auxetic materials (or metamaterials) are those with a negative Poisson ratio (NPR) and that display the unexpected property of lateral expansion when stretched, as well as an equal and opposing densification when compressed. Such geometries are being progressively employed in the development of novel products, especially in the fields of intelligent expandable actuators, shape morphing structures and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic geometries and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study we present a very promising approach for the development of auxetic metamaterials and devices based on the use of direct laser writing. The process stands out for its precision and complex three-dimensional (3D) geometries attainable without the need of supporting structures. To our knowledge it represents one of the first examples of the application of this technology to the manufacture of auxetic geometries and mechanical metamaterials, with details even more remarkable than those shown in very recent studies, almost reaching the current limit of this additive manufacturing technology. We have used some special 3D auxetic designs whose remarkable NPR has been previously highlighted.

Webcasting: A New Technology for Training Special Educators in Rural Areas.

ERIC Educational Resources Information Center

Ludlow, Barbara L.; Duff, Michael C.

This paper describes the use of webcasting technology in a personnel preparation program for rural special education practitioners. Emerging technologies offer promising solutions to the challenges of providing accessible and appropriate training to rural special educators. Web-based instruction is especially appropriate for on-the-job training of…

Getting Better All the Time: Using Music Technology for Learners with Special Needs

ERIC Educational Resources Information Center

Swingler, Tim; Brockhouse, John

2009-01-01

This paper focuses on the category of electronic musical instruments described as "gestural controllers"--motion sensor technology and specially adapted switches--which are widely used in special education. The therapeutic benefits of this technology in emancipating children from their cognitive or physical limitations are increasingly…

Building Bridges between Technology and Content Literacy in Special Education: Lessons Learned from Special Educators' Use of Integrated Technology and Perceived Benefits for Students

ERIC Educational Resources Information Center

Ciampa, Katia

2017-01-01

This single-site case study describes the outcomes and lessons learned from the implementation of a technology professional development initiative aimed at helping three special education teachers from an urban elementary school learn how to infuse technology in their content literacy instruction. Three types of qualitative data were collected:…

Current and long-term technologies of laser therapy

NASA Astrophysics Data System (ADS)

Ulashcyk, Vladimir S.; Volotovskaya, Anna V.

2007-06-01

Laser therapy, using low-energy laser radiation, is being more and more applied. The most applied technology is transcutaneous radiation of tissues by laser radiation. Originally, a direct action on a pathological site was mostly used, but recently more attention is given to reflexogenic areas, acupuncture points, and endocrine organ projection sites. The development of light-conductive engineering made it possible to practically apply intraorgan laser therapy. This technology is widely spread in gynecology, otorhinolaryngology, urology, gastroenterology, etc. Close to it are different versions of intratissue laser therapy (intraosteal, periosteal, myofascial). A special kind of laser therapy is laser hemotherapy. Depending on the techniques and protocol of its application, there are extracorporeal, intravascular, and supravenous ways of action. According to our comparative investigations, supravenous hemotherapy by its therapeutic efficacy and major medicinal effects can be well compared with intravascular laser hemotherapy. With good prospects and efficiency is laser therapy as a combination of laser and other physical factors. Magnetolaser therapy has been scientifically substantiated and practically applied so far. Theoretically and experimentally substantiated is a combined application of laser radiation and physical factors such as ultrasound, direct current field, vacuum, cryotherapy, etc. Experimental research and few so far clinical observations are indicative of prospects of a complex application of laser radiation and drugs. To improve light absorption, laser radiation is combined with different dyes. Photodynamic therapy, originally used in oncology, is applied today in treating different diseases. We showed a possibility of using a number of drugs possessing simultaneously photosensitizing properties to this end. Laser radiation significantly influences pharmacokinetics and pharmacodynamics of drugs, which gives reason to practically implement laser technologies, based on pharmacomodulating action of laser radiation, to practical medicine.

40 CFR 1060.640 - What special provisions apply to branded equipment?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply to branded equipment? 1060.640 Section 1060.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... STATIONARY EQUIPMENT Special Compliance Provisions § 1060.640 What special provisions apply to branded...

Associate Degree Curriculum for Engineering Technology.

ERIC Educational Resources Information Center

Campbell, Clifton P.

Presented is a two-year associate degree curriculum for Engineering Technology. Specializations are provided in civil, electronics, and mechanical technology. The civil engineering technology specialization facilitates three major areas of study, and mechanical technology includes design and production options. Each curriculum was designed to…

Can Applied Naturoptics Fund Associates Degrees in Applied Optics Graduates, in the Americas and Elsewhere, into BS/MS/PhD Physics/Applied Physics Programs?

NASA Astrophysics Data System (ADS)

Ferreira, Nadja; Andrade, Jennifer; Mc Leod, Roger D.

2007-04-01

Youthful females and other disadvantaged minority members sometimes develop visual handicaps when educational and/or other stressors are present. Special methods already available, effective, and underutilized, can be marshaled towards correcting current technologic and academic systems demand-supply mismatches in the sciences. More efficient harvesting of intellectually advantaged youthful students may represent more-highly-productive global scientific output. RDM has found that it is possible to motivate, stimulate, teach, and foster increased science interest by interacting with students at the earliest possible academic moments. The same applied optics of burning paper with a magnifying glass, and prismatic dispersing of light, allows understanding how vision operates, and can be damaged. Providing information to all students that they safely can self-repair damaged vision could only increase their interest in physics and special work-study programs. ``Indians'' are the most poorly represented group at all levels of education and its support services. MOLLOCKET/MULLAH indicates extra-human/higher-power interactions. Why? Obvious survival value suggests possible information-transmission attempts like those accessed by ``Indians.'' To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2007.NES07.C2.2

40 CFR 1054.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 1054.640 Section 1054.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... EQUIPMENT Special Compliance Provisions § 1054.640 What special provisions apply to branded engines? The...

40 CFR 1039.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 1039.640 Section 1039.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... ENGINES Special Compliance Provisions § 1039.640 What special provisions apply to branded engines? The...

40 CFR 1045.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 1045.640 Section 1045.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... VESSELS Special Compliance Provisions § 1045.640 What special provisions apply to branded engines? The...

The West Virginia Special Education Technology Integration Specialist (SETIS) Program: 2012-2014 Evaluation Report

ERIC Educational Resources Information Center

Stohr, Amber D.

2015-01-01

The Special Education Technology Integration Specialist (SETIS) program provides professional development for special education teachers to assist them in achieving proficiency with 21st Century Technology Tools. The program completed its eighth and ninth rounds during the 2012-2013 and 2013-2014 school years, training more than 30 special…

Engaging Students Regarding Special Needs in Technology and Engineering Education

ERIC Educational Resources Information Center

White, David W.

2015-01-01

In 1984, James Buffer and Michael Scott produced the book "Special Needs Guide for Technology Education" (Buffer and Scott, 1984). This was a pivotal offering insofar as it set the stage for technology education educators, at the time, to think about and be provided with information regarding students with special needs in their…

Battling Brittle Bones

NASA Technical Reports Server (NTRS)

2002-01-01

The accuDEXA(R) Bone Mineral Density Assessment System, manufactured by Schick Technologies, Inc., utilizes "camera on a chip" sensor technology invented and developed by NASA's Jet Propulsion Laboratory. Schick's accuDEXA system offers several advantages over traditional osteoporosis tests, which assess bone density loss in the hip and spine, and require specialized personnel to conduct. With accuDEXA, physicians can test the entire body's bone density at a peripheral site, such as the finger, without applying gels or having patients remove garments. Results are achieved in 30 seconds and printed out in less than a minute, compared to the estimated exam time of 15 minutes for hip and spine density analyses. Schick has also applied the CMOS APS technology to a new software product that performs dental radiography using up to 90 percent less radiation exposure than conventional X-rays. Called Computed Dental Radiography(R), the new digital imaging product utilizes an electronic sensor in place of X-ray film to generate sharp and clear images that appear on a computer screen within 3 seconds, and can be enlarged and enhanced to identify problems.

14 CFR 1260.57 - New technology.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false New technology. 1260.57 Section 1260.57... Special Conditions § 1260.57 New technology. New Technology October 2000 (a) Definitions. Administrator... and disclosed to Recipient personnel responsible for the administration of this New Technology special...

Mapping the Sloan Digital Sky Survey's Global Impact

NASA Astrophysics Data System (ADS)

Chen, Chaomei; Zhang, Jian; Vogeley, Michael S.

2009-07-01

The scientific capacity of a country is essential in todayâ's increasingly globalized science and technology ecosystem. Scientific capacity has four increasingly advanced levels of capabilities: absorbing, applying, creating, and retaining scientific knowledge. Moving to a advanced level requires additional skills and training. For example, it requires more specialized skills to apply scientific knowledge than to absorb knowledge. Similarly, making new discoveries requires more knowledge than applying existing procedures. Research has shown the importance of addressing specific, local problems while tapping into globally available expertise and resources. Accessing scientific knowledge is the first step towards absorbing knowledge. Low-income countries have increased their access to scientific literature on the Internet, but to what extent has this access led to more advanced levels of scientific capacity? Interdisciplinary and international collaboration may hold the key to creating and retaining knowledge. For example, creative ideas tend to be associated with inspirations originated from a diverse range of perspectives On the other hand, not all collaborations are productive. Assessing global science and technology needs to address both successes and failures and reasons behind them.

31 CFR 380.1 - What special definitions apply to this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What special definitions apply to this part? 380.1 Section 380.1 Money and Finance: Treasury Regulations Relating to Money and Finance... VALUATION General Information § 380.1 What special definitions apply to this part? Special definitions that...

31 CFR 380.1 - What special definitions apply to this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false What special definitions apply to this part? 380.1 Section 380.1 Money and Finance: Treasury Regulations Relating to Money and Finance... VALUATION General Information § 380.1 What special definitions apply to this part? Special definitions that...

Ordnance News

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bofman, Ryan K.

Since July of 2016 I have been assigned as a Guest Scientist at Los Alamos National Laboratory under the Training With Industries (TWI) Program. Los Alamos National Laboratory has proven to be a challenging and rewarding assignment in which I have found myself at the cutting edge of technologies pertinent to the Explosive Ordnance Disposal career field. In the last 7 months I have had the pleasure of working in an applications group that conducts research at the DOE “Q” and SCI levels. The group “uses a broad range of engineering and scientific expertise to support nuclear counter proliferation (NCP),more » nuclear counter terrorism (NCT), and nuclear emergency response (ER) missions. The Group contributes to national programs intended to protect, deter, and respond to weapons of mass destruction through tailored training and by using specialized applied electromagnetic solutions, rapid prototyping, designing/building/testing/delivering tools and trainers along with novel safing technologies, RF solutions, and cyberphysical applications”. While the specifics of the work performed are classified, the groups “core expertise includes pulsed power; EMP effects; nuclear weapons engineering; weapons effects and materials; predictive/hydrodynamic modeling and testing; firing and penalty systems; x-ray and non-destructive evaluation of threat devices; applied physics; advanced RF systems; powerline communications; novel electronics; 3-D printing of specialized components and cyber assessment/response technologies”. (int.lanl.gov/org/padgs/threat-identification-response/analytics-intelligencetechnology/ a-3/index.shtml)« less

40 CFR 1051.645 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 1051.645 Section 1051.645 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Provisions § 1051.645 What special provisions apply to branded engines? The following provisions apply if you...

Integrating Technology in Teaching Students with Special Learning Needs in the SPED Schools in Baguio City

ERIC Educational Resources Information Center

Balmeo, Marilyn L.; Nimo, Erika Mae A.; Pagal, Aubrey M.; Puga, Stephanie C.; ArisDafQuiño; Sanwen, Jaleen L.

2014-01-01

Leading-edge creation and development of technologies including those for the children with special learning needs found common place in the educational system. Allowably, this study's focal point engages in the integration of technologies in the educational environments where students with special learning needs are housed. Respondents include 53…

VLSI Technology: Impact and Promise. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Bayoumi, Magdy

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the implications of very large scale integrated (VLSI) technology. The first section reviews the development of educational technology, particularly microelectronics technology, from the 1950s to the present. The implications…

Engineering Approaches to Illuminating Brain Structure and Dynamics

PubMed Central

Deisseroth, Karl; Schnitzer, Mark J.

2017-01-01

Historical milestones in neuroscience have come in diverse forms, ranging from the resolution of specific biological mysteries via creative experimentation to broad technological advances allowing neuroscientists to ask new kinds of questions. The continuous development of tools is driven with a special necessity by the complexity, fragility, and inaccessibility of intact nervous systems, such that inventive technique development and application drawing upon engineering and the applied sciences has long been essential to neuroscience. Here we highlight recent technological directions in neuroscience spurred by progress in optical, electrical, mechanical, chemical, and biological engineering. These research areas are poised for rapid growth and will likely be central to the practice of neuroscience well into the future. PMID:24183010

How Special Are Teachers of Specialized Schools? Assessing Self-Confidence Levels in the Technology Domain

ERIC Educational Resources Information Center

Çatma, Zehra; Corlu, Mehmet Sencer

2016-01-01

This study investigates whether specialized high school mathematics teachers, chosen to educate selected students, are mentally ready to integrate Fatih project technologies into their teaching. Forty mathematics teachers from randomly selected specialized and general high schools in Ankara responded to a survey comprising 31 items grouped under…

A Technology Program that Rescues Spacecraft

NASA Astrophysics Data System (ADS)

Deutsch, Leslie J.; Lesh, J. R.

2004-03-01

There has never been a long-duration deep space mission that did not have unexpected problems during operations. JPL's Interplanetary Network Directorate (IND) Technology Program was created to develop new and improved methods of communication, navigation, and operations. A side benefit of the program is that it maintains a cadre of human talent and experimental systems that can be brought to bear on unexpected problems that may occur during mission operations. Solutions fall into four categories: applying new technology during operations to enhance science performance, developing new operational strategies, providing domain experts to help find solutions, and providing special facilities to trouble-shoot problems. These are illustrated here using five specific examples of spacecraft anomalies that have been solved using, at least in part, expertise or facilities from the IND Technology Program: Mariner 10, Voyager, Galileo, SOHO, and Cassini/Huygens. In this era of careful cost management, and emphasis on returns-on-investment, it is important to recognize this crucial additional benefit from such technology program investments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond, David W.; Gaither, Katherine N.; Polsky, Yarom

Sandia National Laboratories (Sandia) has a long history in developing compact, mobile, very high-speed drilling systems and this technology could be applied to increasing the rate at which boreholes are drilled during a mine accident response. The present study reviews current technical approaches, primarily based on technology developed under other programs, analyzes mine rescue specific requirements to develop a conceptual mine rescue drilling approach, and finally, proposes development of a phased mine rescue drilling system (MRDS) that accomplishes (1) development of rapid drilling MRDS equipment; (2) structuring improved web communication through the Mine Safety & Health Administration (MSHA) web site;more » (3) development of an improved protocol for employment of existing drilling technology in emergencies; (4) deployment of advanced technologies to complement mine rescue drilling operations during emergency events; and (5) preliminary discussion of potential future technology development of specialized MRDS equipment. This phased approach allows for rapid fielding of a basic system for improved rescue drilling, with the ability to improve the system over time at a reasonable cost.« less

Distributed 3D Information Visualization - Towards Integration of the Dynamic 3D Graphics and Web Services

NASA Astrophysics Data System (ADS)

Vucinic, Dean; Deen, Danny; Oanta, Emil; Batarilo, Zvonimir; Lacor, Chris

This paper focuses on visualization and manipulation of graphical content in distributed network environments. The developed graphical middleware and 3D desktop prototypes were specialized for situational awareness. This research was done in the LArge Scale COllaborative decision support Technology (LASCOT) project, which explored and combined software technologies to support human-centred decision support system for crisis management (earthquake, tsunami, flooding, airplane or oil-tanker incidents, chemical, radio-active or other pollutants spreading, etc.). The performed state-of-the-art review did not identify any publicly available large scale distributed application of this kind. Existing proprietary solutions rely on the conventional technologies and 2D representations. Our challenge was to apply the "latest" available technologies, such Java3D, X3D and SOAP, compatible with average computer graphics hardware. The selected technologies are integrated and we demonstrate: the flow of data, which originates from heterogeneous data sources; interoperability across different operating systems and 3D visual representations to enhance the end-users interactions.

Component Composition for Embedded Systems Using Semantic Aspect-Oriented Programming

DTIC Science & Technology

2004-10-01

real - time systems for the defense community. Our research focused on Real-Time Java implementation and analysis techniques. Real-Time Java is important for the defense community because it holds out the promise of enabling developers to apply COTS Java technology to specialized military embedded systems. It also promises to allow the defense community to utilize a large Java-literate workforce for building defense systems. Our research has delivered several techniques that may make Real-Time Java a better platform for developing embedded

Small, high-speed bearing technology for cryogenic turbo-pumps

NASA Technical Reports Server (NTRS)

Winn, L. W.; Eusepi, M. W.; Smalley, A. J.

1974-01-01

The design of 20-mm bore ball bearings is described for cryogenic turbo-machinery applications, operating up to speeds of 120,000 rpm. A special section is included on the design of hybrid bearings. Each hybrid bearing is composed of a ball bearing in series with a conventional pressurized fluid-film journal bearing. Full details are presented on the design of a test vehicle which possesses the capability of testing the above named bearings within the given speed range under externally applied radial and axial loads.

76 FR 40712 - Office of Special Education and Rehabilitative Services; Technology and Media Services for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-11

... DEPARTMENT OF EDUCATION Office of Special Education and Rehabilitative Services; Technology and... FY 2011 under the Technology and Media Services for Individuals with Disabilities Program--Research and Development Center on the Use of Emerging Technologies to Improve Literacy Achievement for...

Introduction to the Special Issue on "State-of-the-Art Sensor Technology in Japan 2015".

PubMed

Tokumitsu, Masahiro; Ishida, Yoshiteru

2016-08-23

This Special Issue, "State-of-the-Art Sensor Technology in Japan 2015", collected papers on different kinds of sensing technology: fundamental technology for intelligent sensors, information processing for monitoring humans, and information processing for adaptive and survivable sensor systems.[...].

Environmental aspects of the implementation of geogrids for pavement optimisation

NASA Astrophysics Data System (ADS)

Kawalec, Jacek; Gołos, Michał; Mazurowski, Piotr

2018-05-01

Technological developments in highway construction should not only result in durable, safe and cost-effective solutions for roads and pavements but also, and perhaps above all, lead to solutions that minimise the negative impact of construction on the environment. One of the ways to ensure these requirements are met is to apply technology using geosynthetics. This paper discusses the stabilisation of aggregate with hexagonal geogrids and the benefits - from the point of view of reducing the emission of harmful gases to the atmosphere - which can be realised from this approach, compared with traditional approaches. Solutions for the improvement of weak subgrades and optimisation of the entire pavement structure are discussed, along with the presentation of sample calculations of greenhouse gas emissions, carried out with the use of specialized software related to the construction of the structures in various technologies.

Delivering on the promise of Plato's academy: educational accessibility for the 21st century.

PubMed

Wheatly, Michele G; Flach, John; Shingledecker, Clark; Golshani, Forouzan

2010-01-01

This special volume is dedicated to eight updated and expanded communications selected from 33 refereed papers presented at the inaugural international conference on Technology-based Learning with Disability (LWD-07) which took place on July 19-20, 2007 at Wright State University in Dayton, Ohio. Approximately 140 researchers and practitioners attended LWD-07 representing a cross-section of K-12 and higher education, pure and applied research, disability-related industry and rehabilitation agencies with common interests in facilitating educational attainment for people with all types of disabilities through use of technology. The communications selected for publication are representative of the breadth of interest at the nexus of disability, assistive technology, and the pedagogy of individualized learning. Access to education is a key component for quality of life and rehabilitation of any individual with a disability.

The LSST Camera 500 watt -130 degC Mixed Refrigerant Cooling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowden, Gordon B.; Langton, Brian J.; /SLAC

2014-05-28

The LSST Camera has a higher cryogenic heat load than previous CCD telescope cameras due to its large size (634 mm diameter focal plane, 3.2 Giga pixels) and its close coupled front-end electronics operating at low temperature inside the cryostat. Various refrigeration technologies are considered for this telescope/camera environment. MMR-Technology’s Mixed Refrigerant technology was chosen. A collaboration with that company was started in 2009. The system, based on a cluster of Joule-Thomson refrigerators running a special blend of mixed refrigerants is described. Both the advantages and problems of applying this technology to telescope camera refrigeration are discussed. Test results frommore » a prototype refrigerator running in a realistic telescope configuration are reported. Current and future stages of the development program are described. (auth)« less

Virtual Reality and Its Potential Use in Special Education. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Woodward, John

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the possible contributions of virtual reality technology to educational services for students with disabilities. An example of the use of virtual reality in medical imaging introduces the paper and leads to a brief review of…

Evaluation of Algorithms for Compressing Hyperspectral Data

NASA Technical Reports Server (NTRS)

Cook, Sid; Harsanyi, Joseph; Faber, Vance

2003-01-01

With EO-1 Hyperion in orbit NASA is showing their continued commitment to hyperspectral imaging (HSI). As HSI sensor technology continues to mature, the ever-increasing amounts of sensor data generated will result in a need for more cost effective communication and data handling systems. Lockheed Martin, with considerable experience in spacecraft design and developing special purpose onboard processors, has teamed with Applied Signal & Image Technology (ASIT), who has an extensive heritage in HSI spectral compression and Mapping Science (MSI) for JPEG 2000 spatial compression expertise, to develop a real-time and intelligent onboard processing (OBP) system to reduce HSI sensor downlink requirements. Our goal is to reduce the downlink requirement by a factor > 100, while retaining the necessary spectral and spatial fidelity of the sensor data needed to satisfy the many science, military, and intelligence goals of these systems. Our compression algorithms leverage commercial-off-the-shelf (COTS) spectral and spatial exploitation algorithms. We are currently in the process of evaluating these compression algorithms using statistical analysis and NASA scientists. We are also developing special purpose processors for executing these algorithms onboard a spacecraft.

The Development of Micromachined Gyroscope Structure and Circuitry Technology

PubMed Central

Xia, Dunzhu; Yu, Cheng; Kong, Lun

2014-01-01

This review surveys micromachined gyroscope structure and circuitry technology. The principle of micromachined gyroscopes is first introduced. Then, different kinds of MEMS gyroscope structures, materials and fabrication technologies are illustrated. Micromachined gyroscopes are mainly categorized into micromachined vibrating gyroscopes (MVGs), piezoelectric vibrating gyroscopes (PVGs), surface acoustic wave (SAW) gyroscopes, bulk acoustic wave (BAW) gyroscopes, micromachined electrostatically suspended gyroscopes (MESGs), magnetically suspended gyroscopes (MSGs), micro fiber optic gyroscopes (MFOGs), micro fluid gyroscopes (MFGs), micro atom gyroscopes (MAGs), and special micromachined gyroscopes. Next, the control electronics of micromachined gyroscopes are analyzed. The control circuits are categorized into typical circuitry and special circuitry technologies. The typical circuitry technologies include typical analog circuitry and digital circuitry, while the special circuitry consists of sigma delta, mode matching, temperature/quadrature compensation and novel special technologies. Finally, the characteristics of various typical gyroscopes and their development tendency are discussed and investigated in detail. PMID:24424468

[The method and application to construct experience recommendation platform of acupuncture ancient books based on data mining technology].

PubMed

Chen, Chuyun; Hong, Jiaming; Zhou, Weilin; Lin, Guohua; Wang, Zhengfei; Zhang, Qufei; Lu, Cuina; Lu, Lihong

2017-07-12

To construct a knowledge platform of acupuncture ancient books based on data mining technology, and to provide retrieval service for users. The Oracle 10 g database was applied and JAVA was selected as development language; based on the standard library and ancient books database established by manual entry, a variety of data mining technologies, including word segmentation, speech tagging, dependency analysis, rule extraction, similarity calculation, ambiguity analysis, supervised classification technology were applied to achieve text automatic extraction of ancient books; in the last, through association mining and decision analysis, the comprehensive and intelligent analysis of disease and symptom, meridians, acupoints, rules of acupuncture and moxibustion in acupuncture ancient books were realized, and retrieval service was provided for users through structure of browser/server (B/S). The platform realized full-text retrieval, word frequency analysis and association analysis; when diseases or acupoints were searched, the frequencies of meridian, acupoints (diseases) and techniques were presented from high to low, meanwhile the support degree and confidence coefficient between disease and acupoints (special acupoint), acupoints and acupoints in prescription, disease or acupoints and technique were presented. The experience platform of acupuncture ancient books based on data mining technology could be used as a reference for selection of disease, meridian and acupoint in clinical treatment and education of acupuncture and moxibustion.

Teams, Networks, and Assistive Technology: Training Special Educators in Rural Areas.

ERIC Educational Resources Information Center

Henderson, Cheryl; Kyger, Maggie; Guarino-Murphey, Dana

Assistive technology is equipment that improves the functional capabilities of individuals with disabilities. Using assistive technology, children discover they have control over their environment and develop a sense of competence and independence. As special education enrollments increase, more students are using assistive technology, but many…

42 CFR 412.87 - Additional payment for new medical services and technologies: General provisions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technologies: General provisions. 412.87 Section 412.87 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... SERVICES Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.87 Additional...

42 CFR 412.87 - Additional payment for new medical services and technologies: General provisions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technologies: General provisions. 412.87 Section 412.87 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... SERVICES Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.87 Additional...

42 CFR 412.88 - Additional payment for new medical service or technology.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technology. 412.88 Section 412.88 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.88 Additional payment...

42 CFR 412.88 - Additional payment for new medical service or technology.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technology. 412.88 Section 412.88 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.88 Additional payment...

42 CFR 412.88 - Additional payment for new medical service or technology.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technology. 412.88 Section 412.88 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.88 Additional payment...

42 CFR 412.87 - Additional payment for new medical services and technologies: General provisions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technologies: General provisions. 412.87 Section 412.87 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... SERVICES Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.87 Additional...

42 CFR 412.87 - Additional payment for new medical services and technologies: General provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technologies: General provisions. 412.87 Section 412.87 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... SERVICES Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.87 Additional...

42 CFR 412.88 - Additional payment for new medical service or technology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology. 412.88 Section 412.88 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... Payments for Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced Devices Additional Special Payment for Certain New Technology § 412.88 Additional payment...

Manipulation of insect behavior with Specialized Pheromone & Lure Application Technology (SPLAT®)

Treesearch

Agenor Mafra-Neto; Frédérique M. de Lame; Christopher J. Fettig; A. Steven Munson; Thomas M. Perring; Lukasz L. Stelinski; Lyndsie Stoltman; Leandro E.J. Mafra; Rafael Borges; Roger I. Vargas

2013-01-01

SPLAT® (Specialized Pheromone and Lure Application Technology) emulsion is a unique controlled-release technology that can be adapted to dispense and protect a wide variety of compounds from degradation, including semiochemicals, pesticides, and phagostimulants, in diverse environments. ISCA Technologies, Inc., in collaboration with colleagues in academia, government,...

Special Needs. [SITE 2002 Section].

ERIC Educational Resources Information Center

2002

This document contains the following papers on special needs from the SITE (Society for Information Technology & Teacher Education) 2002 conference: (1) "Selected Technology-Infused Thematic Activities for Elementary and Special Education Teacher Education Programs" (Cindy L. Anderson and Kevin M. Anderson); (2) "Educational IT: How Students and…

Nicotine uses and abuses: from brain probe to public health menace.

PubMed

Pomerleau, O F; Pomerleau, C S

1989-01-01

There has been a notable lack of dialogue between neuroscientists, who use nicotine in their work as they would any other pharmacological tool, and public policy and health researchers, who view nicotine dependence with increasing dismay and see the continued use of tobacco products as a modern day scourge. This special journal issue attempts to foster communication among nicotine researchers working along the continuum from basic to applied science. An additional objective is to convey a sense for the special problems and opportunities in the study of nicotine and tobacco use that may be of general interest to those concerned with substance abuse. The articles that follow explore two themes, (1) nicotine as a tool to probe neural activity, and (2) tobacco use as a health hazard and societal problem, by examining nicotine from pharmacochemical, biobehavioral, and econo-social perspectives. The rationale for the integration is that there may be benefits from viewing nicotine in a context broader than those dictated by custom and technological specialization.

Special conference of the American Association for Cancer Research on molecular imaging in cancer: linking biology, function, and clinical applications in vivo.

PubMed

Luker, Gary D

2002-04-01

The AACR Special Conference on Molecular Imaging in Cancer: Linking Biology, Function, and Clinical Applications In Vivo, was held January 23-27, 2002, at the Contemporary Hotel, Walt Disney World, Orlando, FL. Co-Chairs David Piwnica-Worms, Patricia Price and Thomas Meade brought together researchers with diverse expertise in molecular biology, gene therapy, chemistry, engineering, pharmacology, and imaging to accelerate progress in developing and applying technologies for imaging specific cellular and molecular signals in living animals and humans. The format of the conference was the presentation of research that focused on basic and translational biology of cancer and current state-of-the-art techniques for molecular imaging in animal models and humans. This report summarizes the special conference on molecular imaging, highlighting the interfaces of molecular biology with animal models, instrumentation, chemistry, and pharmacology that are essential to convert the dreams and promise of molecular imaging into improved understanding, diagnosis, and management of cancer.

40 CFR 1048.635 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 1048.635 Section 1048.635 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Compliance Provisions § 1048.635 What special provisions apply to branded engines? The following provisions...

40 CFR 1051.510 - What special provisions apply for testing ATV engines? [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply for... PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Test Procedures § 1051.510 What special provisions apply for testing ATV engines? [Reserved] ...

PREFACE: The 6th European Conference on Applied Superconductivity (EUCAS 2003)

NASA Astrophysics Data System (ADS)

Vaglio, Ruggero; Donaldson, Gordon

2004-05-01

This special issue of Superconductor Science and Technology contains papers presented at the 6th European Conference on Applied Superconductivity (EUCAS), which was held in Sorrento, Italy, 14--18 September 2003. This important biennial event followed previous successful meetings held in Gottingen, Germany; Edinburgh, Scotland; Eindhoven, the Netherlands; Sitges (Barcelona), Spain; and Copenhagen, Denmark. Following tradition, this EUCAS conference focused on the role of superconductivity in bridging various aspects of research with a variety of concrete advanced applications. EUCAS 2003 attracted about 1000 participants from all around the world with large participation from non-European countries. This conference benefited the worldwide superconductivity community tremendously as scientists operating internationally were able to share their knowledge and experience with one another. We are grateful to all those who submitted papers to the Conference Proceedings, which will be published in an Institute of Physics Conference Series, and also to those who contributed to this special issue. Unfortunately we could not consider every one of the large number of papers submitted to this issue and we express our regret to those whose work could not be included.

Robotics, Artificial Intelligence, Computer Simulation: Future Applications in Special Education.

ERIC Educational Resources Information Center

Moore, Gwendolyn B.; And Others

1986-01-01

Describes possible applications of new technologies to special education. Discusses results of a study designed to explore the use of robotics, artificial intelligence, and computer simulations to aid people with handicapping conditions. Presents several scenarios in which specific technological advances may contribute to special education…

NASA Tech Briefs, July 1998. Volume 22, No. 7

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on graphics and simulation, electronic components and circuits, electronic systems, materials, a second special coverage on mechanical technology, machinery/automation, and a special section of electronics Tech Briefs. There is also a section devoted to the technology of the International Space Station.

Some Aspects in Photogrammetry Education at the Department of Geodesy and Cadastre of the VGTU

NASA Astrophysics Data System (ADS)

Ruzgienė, Birutė

2008-03-01

The education in photogrammetry is very important when applying photogrammetric methods for the terrain mapping purposes, for spatial data modelling, solving engineering tasks, measuring of architectural monuments etc. During the time the traditional photogrammetric technologies have been changing to modern fully digital photogrammetric workflow. The number of potential users of the photogrammetric methods tends to increase, because of high-degree automation in photographs (images) processing. The main subjects in Photogrammetry (particularly in Digital Photogrammetry) educational process are discussed. Different methods and digital systems are demonstrated with the examples of aerial photogrammetry products. The main objective is to search the possibilities for training in the photogrammetric measurements. Special attention is paid to the stereo plotting from aerial photography applying modified for teaching analytical technology. The integration of functionality of Digital Photogrammetric Systems and Digital Image Processing is analysed as well with an intention of extending the application areas and possibilities for usage of modern technologies in urban mapping and land cadastre. The practical presentation of photos geometry restitution is implemented as significant part of the studies. The interactive teaching for main photogrammetric procedures and controlling systems are highly desirable that without any doubt improve the quality of educational process.

A colour image reproduction framework for 3D colour printing

NASA Astrophysics Data System (ADS)

Xiao, Kaida; Sohiab, Ali; Sun, Pei-li; Yates, Julian M.; Li, Changjun; Wuerger, Sophie

2016-10-01

In this paper, the current technologies in full colour 3D printing technology were introduced. A framework of colour image reproduction process for 3D colour printing is proposed. A special focus was put on colour management for 3D printed objects. Two approaches, colorimetric colour reproduction and spectral based colour reproduction are proposed in order to faithfully reproduce colours in 3D objects. Two key studies, colour reproduction for soft tissue prostheses and colour uniformity correction across different orientations are described subsequently. Results are clear shown that applying proposed colour image reproduction framework, performance of colour reproduction can be significantly enhanced. With post colour corrections, a further improvement in colour process are achieved for 3D printed objects.

Engineering approaches to illuminating brain structure and dynamics.

PubMed

Deisseroth, Karl; Schnitzer, Mark J

2013-10-30

Historical milestones in neuroscience have come in diverse forms, ranging from the resolution of specific biological mysteries via creative experimentation to broad technological advances allowing neuroscientists to ask new kinds of questions. The continuous development of tools is driven with a special necessity by the complexity, fragility, and inaccessibility of intact nervous systems, such that inventive technique development and application drawing upon engineering and the applied sciences has long been essential to neuroscience. Here we highlight recent technological directions in neuroscience spurred by progress in optical, electrical, mechanical, chemical, and biological engineering. These research areas are poised for rapid growth and will likely be central to the practice of neuroscience well into the future. Copyright © 2013 Elsevier Inc. All rights reserved.

Technology Activities for Life Skills Support Students. [and] CNC for Lower-Achieving Students.

ERIC Educational Resources Information Center

Ressel, Michael J.; Smith, Clayton

1995-01-01

Ressel shows how providing technology education to special needs students can reaffirm belief in technology education and revitalize desire to teach. Smith suggests that breaking down processes into special steps allows these students to be successful. (JOW)

U.S. advanced launch vehicle technology programs : Quarterly Launch Report : special report

DOT National Transportation Integrated Search

1996-01-01

U.S. firms and U.S. government agencies are jointly investing in advanced launch vehicle technology. This Special Report summarizes U.S. launch vehicle technology programs and highlights the changing : roles of government and industry players in pick...

Variational data assimilation system "INM RAS - Black Sea"

NASA Astrophysics Data System (ADS)

Parmuzin, Eugene; Agoshkov, Valery; Assovskiy, Maksim; Giniatulin, Sergey; Zakharova, Natalia; Kuimov, Grigory; Fomin, Vladimir

2013-04-01

Development of Informational-Computational Systems (ICS) for Data Assimilation Procedures is one of multidisciplinary problems. To study and solve these problems one needs to apply modern results from different disciplines and recent developments in: mathematical modeling; theory of adjoint equations and optimal control; inverse problems; numerical methods theory; numerical algebra and scientific computing. The problems discussed above are studied in the Institute of Numerical Mathematics of the Russian Academy of Science (INM RAS) in ICS for Personal Computers (PC). Special problems and questions arise while effective ICS versions for PC are being developed. These problems and questions can be solved with applying modern methods of numerical mathematics and by solving "parallelism problem" using OpenMP technology and special linear algebra packages. In this work the results on the ICS development for PC-ICS "INM RAS - Black Sea" are presented. In the work the following problems and questions are discussed: practical problems that can be studied by ICS; parallelism problems and their solutions with applying of OpenMP technology and the linear algebra packages used in ICS "INM - Black Sea"; Interface of ICS. The results of ICS "INM RAS - Black Sea" testing are presented. Efficiency of technologies and methods applied are discussed. The work was supported by RFBR, grants No. 13-01-00753, 13-05-00715 and by The Ministry of education and science of Russian Federation, project 8291, project 11.519.11.1005 References: [1] V.I. Agoshkov, M.V. Assovskii, S.A. Lebedev, Numerical simulation of Black Sea hydrothermodynamics taking into account tide-forming forces. Russ. J. Numer. Anal. Math. Modelling (2012) 27, No.1, 5-31 [2] E.I. Parmuzin, V.I. Agoshkov, Numerical solution of the variational assimilation problem for sea surface temperature in the model of the Black Sea dynamics. Russ. J. Numer. Anal. Math. Modelling (2012) 27, No.1, 69-94 [3] V.B. Zalesny, N.A. Diansky, V.V. Fomin, S.N. Moshonkin, S.G. Demyshev, Numerical model of the circulation of Black Sea and Sea of Azov. Russ. J. Numer. Anal. Math. Modelling (2012) 27, No.1, 95-111 [4] V.I. Agoshkov, S.V. Giniatulin, G.V. Kuimov. OpenMP technology and linear algebra packages in the variation data assimilation systems. - Abstracts of the 1-st China-Russia Conference on Numerical Algebra with Applications in Radiactive Hydrodynamics, Beijing, China, October 16-18, 2012. [5] Zakharova N.B., Agoshkov V.I., Parmuzin E.I., The new method of ARGO buoys system observation data interpolation. Russian Journal of Numerical Analysis and Mathematical Modelling. Vol. 28, Issue 1, 2013.

Engineering Design and Automation in the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wantuck, P. J.; Hollen, R. M.

2002-01-01

This paper provides an overview of some design and automation-related projects ongoing within the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory. AET uses a diverse set of technical capabilities to develop and apply processes and technologies to applications for a variety of customers both internal and external to the Laboratory. The Advanced Recovery and Integrated Extraction System (ARIES) represents a new paradigm for the processing of nuclear material from retired weapon systems in an environment that seeks to minimize the radiation dose to workers. To achieve this goal, ARIES relies upon automation-based features to handle and processmore » the nuclear material. Our Chemical Process Development Team specializes in fuzzy logic and intelligent control systems. Neural network technology has been utilized in some advanced control systems developed by team members. Genetic algorithms and neural networks have often been applied for data analysis. Enterprise modeling, or discrete event simulation, as well as chemical process simulation has been employed for chemical process plant design. Fuel cell research and development has historically been an active effort within the AET organization. Under the principal sponsorship of the Department of Energy, the Fuel Cell Team is now focusing on technologies required to produce fuel cell compatible feed gas from reformation of a variety of conventional fuels (e.g., gasoline, natural gas), principally for automotive applications. This effort involves chemical reactor design and analysis, process modeling, catalyst analysis, as well as full scale system characterization and testing. The group's Automation and Robotics team has at its foundation many years of experience delivering automated and robotic systems for nuclear, analytical chemistry, and bioengineering applications. As an integrator of commercial systems and a developer of unique custom-made systems, the team currently supports the automation needs of many Laboratory programs.« less

31 CFR 375.2 - What special definitions apply to this rule?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false What special definitions apply to this rule? 375.2 Section 375.2 Money and Finance: Treasury Regulations Relating to Money and Finance... SECURITIES REDEMPTION OPERATIONS General Information § 375.2 What special definitions apply to this rule? The...

31 CFR 375.2 - What special definitions apply to this rule?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false What special definitions apply to this rule? 375.2 Section 375.2 Money and Finance: Treasury Regulations Relating to Money and Finance... SECURITIES REDEMPTION OPERATIONS General Information § 375.2 What special definitions apply to this rule? The...

31 CFR 375.2 - What special definitions apply to this rule?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false What special definitions apply to this rule? 375.2 Section 375.2 Money and Finance: Treasury Regulations Relating to Money and Finance... SECURITIES REDEMPTION OPERATIONS General Information § 375.2 What special definitions apply to this rule? The...

31 CFR 375.2 - What special definitions apply to this rule?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false What special definitions apply to this rule? 375.2 Section 375.2 Money and Finance: Treasury Regulations Relating to Money and Finance... SECURITIES REDEMPTION OPERATIONS General Information § 375.2 What special definitions apply to this rule? The...

The Use of Educational Technology Integration by Special Education Teachers in Rural Schools in South Carolina

ERIC Educational Resources Information Center

Byrd-Jones, Shannon L.

2011-01-01

Effective professional development training is essential to ensuring full technology integration in all classrooms by all teachers on a regular basis. Technology integration can greatly enhance the learning of all students. In particular students with disabilities and special needs benefit a great deal from the use of technology during…

Inequitable Variations: A Review of Research in Technology, Literacy Studies and Special Education

ERIC Educational Resources Information Center

Pandya, Jessica Zacher; Ávila, JuliAnna

2017-01-01

This essay presents the results of a review of research published in the last 10 years on the uses of what we term "productive" digital technologies in special education contexts. There is little overlap between research on productive technologies such as digital storytelling in mainstream contexts and research on technology use to…

Communication Aids in Special Education.

ERIC Educational Resources Information Center

Education Turnkey Systems, Inc., Falls Church, VA.

One of four reports designed to assess the current state of new technologies, the document reviews the current status of technologically oriented communication aids for the handicapped. Explained are such technological aspects as the characteristics of electronically based devices which permit special students to have access to technological…

NASA's program on icing research and technology

NASA Technical Reports Server (NTRS)

Reinmann, John J.; Shaw, Robert J.; Ranaudo, Richard J.

1989-01-01

NASA's program in aircraft icing research and technology is reviewed. The program relies heavily on computer codes and modern applied physics technology in seeking icing solutions on a finer scale than those offered in earlier programs. Three major goals of this program are to offer new approaches to ice protection, to improve our ability to model the response of an aircraft to an icing encounter, and to provide improved techniques and facilities for ground and flight testing. This paper reviews the following program elements: (1) new approaches to ice protection; (2) numerical codes for deicer analysis; (3) measurement and prediction of ice accretion and its effect on aircraft and aircraft components; (4) special wind tunnel test techniques for rotorcraft icing; (5) improvements of icing wind tunnels and research aircraft; (6) ground de-icing fluids used in winter operation; (7) fundamental studies in icing; and (8) droplet sizing instruments for icing clouds.

Beyond the Baseline: Proceedings of the Space Station Evolution Symposium. Volume 1, Part 2; Space Station Freedom

NASA Technical Reports Server (NTRS)

1990-01-01

This report contains the individual presentations delivered at the Space Station Evolution Symposium in League City, Texas on February 6, 7, 8, 1990. Personnel responsible for Advanced Systems Studies and Advanced Development within the Space Station Freedom Program reported on the results of their work to date. Systems Studies presentations focused on identifying the baseline design provisions (hooks and scars) necessary to enable evolution of the facility to support changing space policy and anticipated user needs. Also emphasized were evolution configuration and operations concepts including on-orbit processing of space transfer vehicles. Advanced Development task managers discussed transitioning advanced technologies to the baseline program, including those near-term technologies which will enhance the safety and productivity of the crew and the reliability of station systems. Special emphasis was placed on applying advanced automation technology to ground and flight systems.

Study on multispectral imaging detection and recognition

NASA Astrophysics Data System (ADS)

Jun, Wang; Na, Ding; Gao, Jiaobo; Yu, Hu; Jun, Wu; Li, Junna; Zheng, Yawei; Fei, Gao; Sun, Kefeng

2009-07-01

Multispectral imaging detecting technology use target radiation character in spectral spatial distribution and relation between spectral and image to detect target and remote sensing measure. Its speciality is multi channel, narrow bandwidth, large amount of information, high accuracy. The ability of detecting target in environment of clutter, camouflage, concealment and beguilement is improved. At present, spectral imaging technology in the range of multispectral and hyperspectral develop greatly. The multispectral imaging equipment of unmanned aerial vehicle can be used in mine detection, information, surveillance and reconnaissance. Spectral imaging spectrometer operating in MWIR and LWIR has already been applied in the field of remote sensing and military in the advanced country. The paper presents the technology of multispectral imaging. It can enhance the reflectance, scatter and radiation character of the artificial targets among nature background. The targets among complex background and camouflage/stealth targets can be effectively identified. The experiment results and the data of spectral imaging is obtained.

Who should conduct aeronautical R and D for the Federal Government?

NASA Technical Reports Server (NTRS)

Album, H. H.

1977-01-01

It was found that Government laboratories, and especially NASA laboratories, should be the prime national producers of applied research in aeronautics. American aeronautic needs the new stimulus of markedly increased outputs of broad-based innovative research from NASA laboratories more than it needs most of the technology advancement and development-oriented programs currently underway in these laboratories. The Government should use manufacturing companies for the vast bulk of development and most technology advancement. However, the Government will have to implement programs to encourage the transfer of full information on technology and research advancements, from the companies that do this work for the Government, to competing companies. Universities should be the primary sources of basic research. Service R&D companies and non-profit R&D institutions provide valuable, specialized, supplementary technical capabilities and other unique attributes, which together span the entire spectrum of aeronautical R&D.

[Construction and Application of Innovative Education Technology Strategies in Nursing].

PubMed

Chao, Li-Fen; Huang, Hsiang-Ping; Ni, Lee-Fen; Tsai, Chia-Lan; Huang, Tsuey-Yuan

2017-12-01

The evolution of information and communication technologies has deeply impacted education reform, promoted the development of digital-learning models, and stimulated the development of diverse nursing education strategies in order to better fulfill needs and expand in new directions. The present paper introduces the intelligent-learning resources that are available for basic medical science education, problem-based learning, nursing scenario-based learning, objective structured clinical examinations, and other similar activities in the Department of Nursing at Chang Gung University of Science and Technology. The program is offered in two parts: specialized classroom facilities and cloud computing / mobile-learning. The latter includes high-fidelity simulation classrooms, online e-books, and virtual interactive simulation and augmented reality mobile-learning materials, which are provided through multimedia technology development, learning management systems, web-certificated examinations, and automated teaching and learning feedback mechanisms. It is expected that the teaching experiences that are shared in this article may be used as a reference for applying professional wisdom teaching models into nursing education.

EDITORIAL: Metrological Aspects of Accelerator Technology and High Energy Physics Experiments

NASA Astrophysics Data System (ADS)

Romaniuk, Ryszard S.; Pozniak, Krzysztof T.

2007-08-01

The subject of this special feature in Measurement Science and Technology concerns measurement methods, devices and subsystems, both hardware and software aspects, applied in large experiments of high energy physics (HEP) and superconducting RF accelerator technology (SRF). These experiments concern mainly the physics of elementary particles or the building of new machines and detectors. The papers present practical examples of applied solutions in large, contemporary, international research projects such as HERA, LHC, FLASH, XFEL, ILC and others. These machines are unique in their global scale and consist of extremely dedicated apparatus. The apparatus is characterized by very large dimensions, a considerable use of resources and a high level of overall technical complexity. They possess a large number of measurement channels (ranging from thousands to over 100 million), are characterized by fast of processing of measured data and high measurement accuracies, and work in quite adverse environments. The measurement channels cooperate with a large number of different sensors of momenta, energies, trajectories of elementary particles, electron, proton and photon beam profiles, accelerating fields in resonant cavities, and many others. The provision of high quality measurement systems requires the designers to use only the most up-to-date technical solutions, measurement technologies, components and devices. Research work in these demanding fields is a natural birthplace of new measurement methods, new data processing and acquisition algorithms, complex, networked measurement system diagnostics and monitoring. These developments are taking place in both hardware and software layers. The chief intention of this special feature is that the papers represent equally some of the most current metrology research problems in HEP and SRF. The accepted papers have been divided into four topical groups: superconducting cavities (4 papers), low level RF systems (8 papers), ionizing radiation (5 papers) and HEP experiments (8 papers). The editors would like to thank cordially all the authors who accepted our invitation to present their very recent results. A number of authors of the papers in this issue are active in the 6th European Framework Research Program CARE—Coordinated Accelerators Research in Europe and ELAN—the European Linear Accelerator Network. Some authors are active in research programs of a global extent such as the LHC, ILC and GDE—the Global Design Effort for the International Linear Collider. We also would like to thank personally, as well as on behalf of all the authors, the Editorial Board of Measurement Science and Technology for accepting this very exciting field of contemporary metrology. This field seems to be really a birthplace of a host of new metrological technologies, where the driving force is the incredibly high technical requirements that must soon be fulfilled if we dream of building new accelerators for elementary particles, new biological materials and medicine alike. Special thanks are due to Professor R S Jachowicz of Warsaw University of Technology for initiating this issue and for continuous support and advice during our work.

Advances in lasers and optical micro-nano-systems

NASA Astrophysics Data System (ADS)

Laurell, F.; Fazio, E.

2010-09-01

Lasers represent a well consolidated technology: nevertheless, research in this field remains very active and productive, in both basic and applied directions. At the moment significant attention is given to those sources that bring together high power and compactness. Such high power lasers find important applications for material treatments and such applications are presented by Ehsani et al and Saiedeh Saghafi et al, in the treatment of dielectric thin films (Alteration of optical and morphological properties of polycarbonate illuminated by visible/IR laser beams) or of biological tissues like pistachio seeds (Investigating the effects of laser beams (532 and 660 nm) in annihilation of pistachio mould fungus using spectrophotometry analysis). In particular the latter paper show how laser sources can find very important applications in new domains, preserving goods and food without the need for preservatives or pesticides by simply sterilizing them using light. Optical Micro and Nano Systems presents a new domain for exploration. In this framework this special issue is very attractive, because it assembles papers reporting new results in three directions: new techniques for monitoring integrated micro- and nano-systems, new integrated systems and novel high performance metamaterial configurations. Integrated micro-components can be monitored and controlled using reflectance measurements as presented by Piombini et al (Toward the reflectance measurement of micro components). Speckle formation during laser beam reflection can also be a very sophisticated tool for detecting ultra-precise displacements, as presented by Filter et al (High resolution displacement detection with speckles : accuracy limits in linear displacement speckle metrology). Three dimensional integrated optical structures is indeed a big challenge and a peculiarity of photonics, they can be formed through traditional holography or using more sophisticated and novel ! technologies. Thus, special manipulation of the writing-reading optical beam can push holography toward storages at higher data densities, as presented by Norihiko Ishii et al (Wavefront compensation method using novel index in holographic data storage). Along a similar direction Furlan et al describe a very innovative technique for producing optical traps using novel Devil micro-lenses (Volumetric multiple optical traps produced by Devil's lenses). Vynnyk et al presented an interesting application of electron microscopy for monitoring sub-micrometric structures in 3D configurations (3D-measurement with the stereo scanning electron microscope on sub-micrometer structure). Finally, S. Rao et al present two interesting papers on integrated structures compatible with silicon technology: one describes the realisation of low-loss waveguides using amorphous silicon, a relatively novel material with many applications in very different domains (Low-loss amorphous silicon waveguid! es grown by PECVD on indium tin oxide), and one on the realisation of a electrically drivable device with affective compatibility with CMOS technology (Electro-optical modulating multistack device based on the CMOS-compatible technology of amorphous silicon). We hope that this special issue of the Journal of the European Optical Society will reflect the interest of the European Scientific Community toward these fundamental and applied topics and will demonstrate to readers some of the actual directions of research. We express our full appreciation to the authors that participated to this initiative which acts only as a primer for the vast amount of work now being undertaken in laser physics and applications in micro- and nano-systems. We would like to give a special thank to the paper reviewers for their important role in the paper selection process and all the journal staff for their very professional support, dedication and energy, which made this special issue feasible.

How To Integrate and Manage New Technology in the Library.

ERIC Educational Resources Information Center

Becker, Joseph

1983-01-01

As technology permeates the special library, new requirements will emerge to integrate staff, equipment, and systems and establish connections between information resources and people. Being library managers in special libraries of tomorrow means mastering fundamentals of cost accounting, strategic planning, technological change, and behavioral…

A Study of Special Education Teachers' Knowledge of Assistive Technology for Children with Reading Difficulties

ERIC Educational Resources Information Center

Sydeski, Randal T.

2013-01-01

This study investigated high school special education teachers' knowledge of assistive technology (AT) for students with reading difficulties in Southwestern Pennsylvania. A survey was disseminated via e-mail using the "SurveyMonkey" online survey tool to 201 special education teachers. The survey asked questions pertaining to the…

Special Education Teachers' Views on Using Technology in Teaching Mathematics

ERIC Educational Resources Information Center

Baglama, Basak; Yikmis, Ahmet; Demirok, Mukaddes Sakalli

2017-01-01

Individuals with special needs require support in acquiring various academic and social skills and mathematical skills are one of the most important skills in which individuals with special needs need to acquire in order to maintain their daily lives. Current approaches in education emphasize the importance of integrating technology into special…

Using Virtual Technology to Enhance Field Experiences for Pre-Service Special Education Teachers

ERIC Educational Resources Information Center

Billingsley, Glenna M.; Scheuermann, Brenda K.

2014-01-01

Teacher educators of pre-service teachers of students with special needs face challenges in providing the unique knowledge and skills required of highly qualified special education teachers. The emerging use of various forms of virtual technology, however, offers realistic solutions to these problems. This systematic review of literature examines…

Computer Technology Applications in Special Education in East Asian Nations.

ERIC Educational Resources Information Center

Tan, Shiow Ling

The paper examines the application of educational technology to special education in East Asia and specifically in Japan, the Republic of China on Taiwan, Singapore, Hong Kong, and the People's Republic of China. The potential role of the microcomputer in special education is stressed and American applications of the microcomputer as a special…

The Future's Future: Implications of Emerging Technology for Special Education Program Planning.

ERIC Educational Resources Information Center

Hofstetter, Fred T.

2001-01-01

This article reviews emerging technologies, imagines how they can be used to help learners with special needs, and recommends new special education program initiatives to help these students make a meaningful transition from school to work. Wearable computers, personal computing devices, DVD, HDTV, MP3, and personal digital assistants are…

Preparing Special Educators in Eastern North Carolina To Use Assistive Technology: A Multimedia Approach to Addressing Training Needs Unique to Rural Areas.

ERIC Educational Resources Information Center

Darrow, Melissa; And Others

This paper describes a project addressing the assistive technology training needs of teachers of children with disabilities in rural eastern North Carolina, through development of a multimedia software tutorial service. The project utilized both a special education/assistive technology professional and an instructional technology professional to…

Model of Providing Assistive Technologies in Special Education Schools.

PubMed

Lersilp, Suchitporn; Putthinoi, Supawadee; Chakpitak, Nopasit

2015-05-14

Most students diagnosed with disabilities in Thai special education schools received assistive technologies, but this did not guarantee the greatest benefits. The purpose of this study was to survey the provision, use and needs of assistive technologies, as well as the perspectives of key informants regarding a model of providing them in special education schools. The participants were selected by the purposive sampling method, and they comprised 120 students with visual, physical, hearing or intellectual disabilities from four special education schools in Chiang Mai, Thailand; and 24 key informants such as parents or caregivers, teachers, school principals and school therapists. The instruments consisted of an assistive technology checklist and a semi-structured interview. Results showed that a category of assistive technologies was provided for students with disabilities, with the highest being "services", followed by "media" and then "facilities". Furthermore, mostly students with physical disabilities were provided with assistive technologies, but those with visual disabilities needed it more. Finally, the model of providing assistive technologies was composed of 5 components: Collaboration; Holistic perspective; Independent management of schools; Learning systems and a production manual for users; and Development of an assistive technology center, driven by 3 major sources such as Government and Private organizations, and Schools.

Introduction to special section of the Journal of Family Psychology, advances in mixed methods in family psychology: integrative and applied solutions for family science.

PubMed

Weisner, Thomas S; Fiese, Barbara H

2011-12-01

Mixed methods in family psychology refer to the systematic integration of qualitative and quantitative techniques to represent family processes and settings. Over the past decade, significant advances have been made in study design, analytic strategies, and technological support (such as software) that allow for the integration of quantitative and qualitative methods and for making appropriate inferences from mixed methods. This special section of the Journal of Family Psychology illustrates how mixed methods may be used to advance knowledge in family science through identifying important cultural differences in family structure, beliefs, and practices, and revealing patterns of family relationships to generate new measurement paradigms and inform clinical practice. Guidance is offered to advance mixed methods research in family psychology through sound principles of peer review.

Secretarial Technology/Office Technology. Supplementary Units.

ERIC Educational Resources Information Center

Rainey, Carolyn

These 10 units provide supplementary materials for special needs students who are enrolled in regular secretarial and office technology courses in Missouri. The special needs units are designed to facilitate the mainstreaming of students with a wide variety of handicapping and disadvantaged conditions. The units are self-paced and contain…

Robotics, Artificial Intelligence, Computer Simulation: Future Applications in Special Education.

ERIC Educational Resources Information Center

Moore, Gwendolyn B.; And Others

The report describes three advanced technologies--robotics, artificial intelligence, and computer simulation--and identifies the ways in which they might contribute to special education. A hybrid methodology was employed to identify existing technology and forecast future needs. Following this framework, each of the technologies is defined,…

Middle School Special Education Teachers' Perceptions and Use of Assistive Technology in Literacy Instruction

ERIC Educational Resources Information Center

Flanagan, Sara; Bouck, Emily C.; Richardson, Jennifer

2013-01-01

In this research the authors examined middle school special education teachers' perceptions of assistive technology during literacy instruction with students with high incidence disabilities. A survey explored the use, effectiveness, and factors impacting use or effectiveness of assistive technology for literacy teaching and learning. Results…

Videodiscs in Special Education.

ERIC Educational Resources Information Center

Education Turnkey Systems, Inc., Falls Church, VA.

One of four reports designed to assess the current state of new technologies, the document reviews the current and future 5-year status of videodisc technology in special and regular education. Described first are the history, technological features, and prices of videodisc systems (which consist of a player, programing material stored on a disc,…

Angular Distributions of Discrete Mesoscale Mapping Functions

NASA Astrophysics Data System (ADS)

Kroszczyński, Krzysztof

2015-08-01

The paper presents the results of analyses of numerical experiments concerning GPS signal propagation delays in the atmosphere and the discrete mapping functions defined on their basis. The delays were determined using data from the mesoscale non-hydrostatic weather model operated in the Centre of Applied Geomatics, Military University of Technology. A special attention was paid to investigating angular characteristics of GPS slant delays for low angles of elevation. The investigation proved that the temporal and spatial variability of the slant delays depends to a large extent on current weather conditions.

PREFACE: 14th Micromechanics Europe Workshop (MME'03)

NASA Astrophysics Data System (ADS)

Wolffenbuttel, R. F.

2004-09-01

This special issue of the Journal of Micromechanics and Microengineering is devoted to the 14th Micromechanics Europe Workshop (MME'03), which was held at Delft University of Technology, The Netherlands on 2-4 November 2003. Papers have been selected from this workshop for presentation in this special issue. After a careful review by the MME'03 programme committee, 53 submissions were selected for poster presentation at the workshop in addition to 6 invited presentations. These covered the many aspects of our exciting field: technology, simulation, system design, fabrication and characterization in a wide range of applications. These contributions confirm a trend from technology-driven towards application-driven technological research. This trend has become possible because of the availability of mature fabrication technologies for micromechanical structures and is reflected by the presentations of some of the invited speakers. There were invited lectures about applications in the medical field, automotive and copiers, which provide evidence of the relevance of our work in society. Nevertheless, development of technologies rightfully remains a core activity of this workshop. This applies to both the introduction of new technologies, as was reflected by invited presentations on new trends in RIE and nanotechnology, and the addressing of manufacturing issues using available techniques, which will be demonstrated to be crucial in automotive applications. Out of these 59 papers 21 have been selected for presentation in this special issue. Since the scope of the workshop is somewhat wider than that of the journal, selection was based not only on the quality of the work, but also on suitability for presentation in the journal. Moreover, at the workshop, student presentation of research at an early stage was strongly encouraged, whereas publication of work in this journal requires a more advanced level. I would like to express my appreciation for the outstanding efforts made by all involved in the workshop: the steering committee for its support, the programme committee for the review and the local organization for all the detailed planning required to make it both an interesting and enjoyable meeting. Last, but not least, I would like to thank the authors for preparing significant and exciting papers that reflect the progress made in the field of micromechanics and the 80 or so attendees for their enthusiastic participation.

Experimental study of an off-axis three mirror anastigmatic system with wavefront coding technology.

PubMed

Yan, Feng; Tao, Xiaoping

2012-04-10

Wavefront coding (WFC) is a kind of computational imaging technique that controls defocus and defocus related aberrations of optical systems by introducing a specially designed phase distribution to the pupil function. This technology has been applied in many imaging systems to improve performance and/or reduce cost. The application of WFC technology in an off-axis three mirror anastigmatic (TMA) system has been proposed, and the design and optimization of optics, the restoration of degraded images, and the manufacturing of wavefront coded elements have been researched in our previous work. In this paper, we describe the alignment, the imaging experiment, and the image restoration of the off-axis TMA system with WFC technology. The ideal wavefront map is set to be the system error of the interferometer to simplify the assembly, and the coefficients of certain Zernike polynomials are monitored to verify the result in the alignment process. A pinhole of 20 μm diameter and the third plate of WT1005-62 resolution patterns are selected as the targets in the imaging experiment. The comparison of the tail lengths of point spread functions is represented to show the invariance of the image quality in the extended depth of focus. The structure similarity is applied to estimate the relationship among the captured images with varying defocus. We conclude that the experiment results agree with the earlier theoretical analysis.

Teachers' Attitude and Competence in the Use of Assistive Technologies in Special Needs Schools

ERIC Educational Resources Information Center

Onivehu, Adams Ogirima; Ohawuiro, Onyiyeche Emilia; Oyeniran, Bunmi Juliana

2017-01-01

This study examined teachers' attitude and competence in the use of assistive technologies in special needs schools. The descriptive survey method was employed for the study among 100 teachers who were drawn using purposive sampling technique from special needs schools in Osun State, Nigeria. Six research questions were generated while four…

Administrative Aspects of Technology Implementation in Special Education. A Synthesis of Information from Eight Federally-Funded Projects.

ERIC Educational Resources Information Center

Office of Special Education and Rehabilitative Services (ED), Washington, DC. Div. of Innovation and Development.

This paper reviews and synthesizes information on the administrative aspects of technology implementation in special education, based on the findings of eight federally funded projects sponsored by the Division of Innovation and Development of the Office of Special Education Programs. Three of the projects specifically focused on administrative…

42 CFR 412.86 - Payment for extraordinarily high-cost day outliers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced... amended at 62 FR 46028, Aug. 29, 1997] Additional Special Payment for Certain New Technology ...

42 CFR 412.86 - Payment for extraordinarily high-cost day outliers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Outlier Cases, Special Treatment Payment for New Technology, and Payment Adjustment for Certain Replaced... amended at 62 FR 46028, Aug. 29, 1997] Additional Special Payment for Certain New Technology ...

76 FR 3642 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Cancer Institute Special Emphasis Panel, Innovative and Early Stage Development of Emerging Technologies... Special Emphasis Panel, Emerging Technologies for Cancer Research. Date: March 29-30, 2011. Time: 8 a.m...

Spinoff 2001: Special Millennium Feature

NASA Technical Reports Server (NTRS)

2001-01-01

For the past 43 years, NASA has devoted its facilities, labor force, and expertise to sharing the abundance of technology developments used for its missions with the nation's industries. These countless technologies have not only successfully contributed to the growth of the U.S. economy, but also to the quality of life on Earth. For the past 25 years, NASA's Spinoff publication has brought attention to thousands of technologies, products, and services that were developed as a direct result of commercial partnerships between NASA and the private business sector. Many of these exciting technologies included advances in ceramics, computer technology, fiber optics, and remote sensing. New and ongoing research at the NASA field centers covers a full spectrum of technologies that will provide numerous advantages for the future, many of which have made significant strides in the commercial market. The NASA Commercial Technology Network plays a large role in transferring this progress. By applying NASA technologies such as data communication, aircraft de-icing technologies, and innovative materials to everyday functions, American consumers and the national economy benefit. Moving forward into the new millennium, these new technologies will further advance our country's position as the world leader in scientific and technical innovation. These cutting-edge innovations represent the investment of the U.S. citizen in the Space Program. Some of these technologies are highlighted in Spinoff 2001, an example of NASA's commitment to technology transfer and commercialization assistance. This year's issue spotlights the commercial technology efforts of NASA's John F. Kennedy Space Center. Kennedy's extensive network of commercial technology opportunities has enabled them to become a leader in technology transfer outreach. This kind of leadership is exemplified through Kennedy's recent partnership with the State of Florida, working toward the development of the Space Experiment Research and Processing Laboratory. The new laboratory is the first step toward the development of a proposed 400-acre Space Commerce Park, located at Kennedy Space Center. Spinoff, once again, successfully showcases the variety of commercial successes and benefits resulting from the transfer of NASA technology to private industry. It is with great pride and pleasure that we present Spinoff 2001 with a Special Millennium Feature. With help from U.S. industry and commercial technology programs, NASA will continue to assist in the presentation of innovative new products to our nation.

Technology Counts 2009: Breaking Away from Tradition--E-Education Expands Opportunities for Raising Achievement

ERIC Educational Resources Information Center

Education Week, 2009

2009-01-01

This special issue presents the "Education Week's" annual report on education technology, "Technology Counts." This special issue includes the following articles: (1) Breaking Away from Tradition (Michelle R. Davis); (2) Research Shows Evolving Picture of E-Education (Debra Viadero); (3) Advanced Placement Secures Online Niche (Michelle R. Davis);…

Special Education Teachers' Use of Assistive Technology with Students Who Have Severe Disabilities

ERIC Educational Resources Information Center

Connor, Cynthia; Snell, Martha; Gansneder, Bruce; Dexter, Sara

2010-01-01

Teachers' integration of computer-based assistive technology has been linked to positive educational outcomes for students with disabilities. This study was conducted to identify factors that are predictive of integrating assistive technology into teaching practices among general and special education teachers of students with severe disabilities.…

Students with Special Educational Needs and Assistive Technologies: A Literature Review

ERIC Educational Resources Information Center

Erdem, Raziye

2017-01-01

The term "assistive technologies" refers to the equipment, devices and apparatus, and the services, systems, processes and adaptations made to the environment that support and facilitate their functions, used by persons with special education needs. This study is a literature review of the use of assistive technologies in the education…

13 CFR 124.111 - Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD...

Code of Federal Regulations, 2012 CFR

2012-01-01

... Corporations (CDCs) have any special rules for applying to the 8(a) BD program? 124.111 Section 124.111... 8(a) Business Development Program § 124.111 Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD program? (a) Concerns owned at least 51 percent by CDCs (or a...

13 CFR 124.111 - Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD...

Code of Federal Regulations, 2014 CFR

2014-01-01

... Corporations (CDCs) have any special rules for applying to the 8(a) BD program? 124.111 Section 124.111... 8(a) Business Development Program § 124.111 Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD program? (a) Concerns owned at least 51 percent by CDCs (or a...

13 CFR 124.111 - Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Corporations (CDCs) have any special rules for applying to the 8(a) BD program? 124.111 Section 124.111... 8(a) Business Development Program § 124.111 Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD program? (a) Concerns owned at least 51 percent by CDCs (or a...

13 CFR 124.111 - Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD...

Code of Federal Regulations, 2013 CFR

2013-01-01

... Corporations (CDCs) have any special rules for applying to the 8(a) BD program? 124.111 Section 124.111... 8(a) Business Development Program § 124.111 Do Community Development Corporations (CDCs) have any special rules for applying to the 8(a) BD program? (a) Concerns owned at least 51 percent by CDCs (or a...

[The experience with the information expert systems in forensic psychiatric services within the Russian Federation].

PubMed

Sannikov, A G

2008-01-01

The assessment of the effectiveness of the informatization of the forensic psychiatric expertise service in the Tyumen oblast based on the data of the medical sociological research carried out by means of total questionnaire design of the forensic psychiatrists applied in repetition-free mode. The following basic positive outcomes of the informatization of the forensic psychiatric service are marked: the optimization of clinical, registering-accounting and managerial activities of the expert commissions; enhancement of the expertise staff's self-appraisal related to the mastering of information technologies; employees' formed will to implement the IT-technologies for the purpose of professional development. Besides the assessment of the effectiveness of the specialized service's informatization the results of the research can provide information on the optimal structure of the medical information systems.

An Optimization Study of Hot Stamping Operation

NASA Astrophysics Data System (ADS)

Ghoo, Bonyoung; Umezu, Yasuyoshi; Watanabe, Yuko; Ma, Ninshu; Averill, Ron

2010-06-01

In the present study, 3-dimensional finite element analyses for hot-stamping processes of Audi B-pillar product are conducted using JSTAMP/NV and HEEDS. Special attention is paid to the optimization of simulation technology coupling with thermal-mechanical formulations. Numerical simulation based on FEM technology and optimization design using the hybrid adaptive SHERPA algorithm are applied to hot stamping operation to improve productivity. The robustness of the SHERPA algorithm is found through the results of the benchmark example. The SHERPA algorithm is shown to be far superior to the GA (Genetic Algorithm) in terms of efficiency, whose calculation time is about 7 times faster than that of the GA. The SHERPA algorithm could show high performance in a large scale problem having complicated design space and long calculation time.

The development of enabling technologies for producing active interrogation beams.

PubMed

Kwan, Thomas J T; Morgado, Richard E; Wang, Tai-Sen F; Vodolaga, B; Terekhin, V; Onischenko, L M; Vorozhtsov, S B; Samsonov, E V; Vorozhtsov, A S; Alenitsky, Yu G; Perpelkin, E E; Glazov, A A; Novikov, D L; Parkhomchuk, V; Reva, V; Vostrikov, V; Mashinin, V A; Fedotov, S N; Minayev, S A

2010-10-01

A U.S./Russian collaboration of accelerator scientists was directed to the development of high averaged-current (∼1 mA) and high-quality (emittance ∼15 πmm mrad; energy spread ∼0.1%) 1.75 MeV proton beams to produce active interrogation beams that could be applied to counterterrorism. Several accelerator technologies were investigated. These included an electrostatic tandem accelerator of novel design, a compact cyclotron, and a storage ring with energy compensation and electron cooling. Production targets capable of withstanding the beam power levels were designed, fabricated, and tested. The cyclotron/storage-ring system was theoretically studied and computationally designed, and the electrostatic vacuum tandem accelerator at BINP was demonstrated for its potential in active interrogation of explosives and special nuclear materials.

Martin Marietta, Y-12 Plant Laboratory Partnership Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koger, J.

1995-02-10

The Y-12 Plant currently embraces three mission areas; stockpile surveillance, maintaining production capability, and storage of special nuclear materials. The Y-12 Plant also contributes to the nations` economic strength by partnering with industry in deploying technology. This partnering has been supported to a great extent through the Technology Transfer Initiative (TTI) directed by DOE/Defense Programs (DP-14). The Oak Ridge Centers for Manufacturing Technology (ORCMT) was established to draw upon the manufacturing and fabrication capabilities at the Y-12 Plant to coordinate and support collaborative efforts, between DP and the domestic industrial sector, toward the development of technologies which offer mutual benefitmore » to both DOE/DP programs and the private sector. Most of the needed technologies for the ``Factory of the Future`` (FOF) are being pursued as core areas at the Y-12 Plant. As a result, 85% of DP-14 projects already support the FOF. The unique capabilities of ORCMT can be applied to a wide range of manufacturing problems to enhance the capabilities of the US industrial base and its economic outcome. The ORCMT has an important role to play in DOE`s Technology Transfer initiative because its capabilities are focused on applied manufacturing and technology deployment which has a more near-term impact on private sector competitiveness. The Y-12 Plant uses the ORCMT to help maintain its own core competencies for the FOF by challenging its engineers and capabilities with technical problems from industry. Areas of strength at the Y-12 Plant that could impact the FOF include modeling of processes and advanced materials; intelligent inspection systems with standardized operator interfaces, analysis software, and part programming language; electronic transfer of designs and features; existing computer-based concurrent engineering; and knowledge-based forming process.« less

Preface to Special Issue of ChemSusChem on Perovskite Optoelectronics.

PubMed

Bolink, Henk J; Mhaisalkar, Subodh G

2017-10-09

This Editorial introduces one of two companion Special Issues on "Halide Perovskites for Optoelectronics Applications" in ChemSusChem and Energy Technology following the ICMAT 2017 Conference in Singapore. More information on the other Special Issue can be found in the Editorial published in Energy Technology. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Features of the Information and Communication Technology Application by the Subjects of Special Education

ERIC Educational Resources Information Center

Arhipova, Svetlana Vladimirovna; Sergeeva, Olesya Sergeevna

2015-01-01

The main purpose of this study is to reveal the features of information and communication technologies application by the subjects of education in the conditions of special (correctional) school type VIII, and to identify the level of computer literacy of special education. The study was conducted on the basis of the State Budgetary Special…

Advance of Hazardous Operation Robot and its Application in Special Equipment Accident Rescue

NASA Astrophysics Data System (ADS)

Zeng, Qin-Da; Zhou, Wei; Zheng, Geng-Feng

A survey of hazardous operation robot is given out in this article. Firstly, the latest researches such as nuclear industry robot, fire-fighting robot and explosive-handling robot are shown. Secondly, existing key technologies and their shortcomings are summarized, including moving mechanism, control system, perceptive technology and power technology. Thirdly, the trend of hazardous operation robot is predicted according to current situation. Finally, characteristics and hazards of special equipment accident, as well as feasibility of hazardous operation robot in the area of special equipment accident rescue are analyzed.

[The place and the role of topographic and clinical anatomy in the modern system of higher medical education].

PubMed

Bol'shakov, O P

2008-01-01

Modern data on studying and teaching topographic and clinical anatomy in Russia and in the foreign countries at the boundary between the XX and the XXI centuries are analyzed. Definitions of some concepts are given; methodological and organizational bases of studying topographic and clinical anatomy are examined in historical aspect. Various approaches to the teaching and studying of these disciplines in different countries, are demonstrated. Special attention is given to the use of new technologies in teaching; the experience of virtual mode of studying of applied anatomy and surgical techniques is critically evaluated. Article presents author's own opinion and analyzes the conceptions of the foreign authors on the necessity of rational combination of computer and other modem technologies with traditional methods of work using biological materials and experiments on laboratory animals. The longstanding experience of the departments of operative surgery and clinical anatomy is summarized and the benefits of the national system of teaching of applied (topographic and clinical) anatomy are shown. Modem tendencies and priorities in the development of topographic and clinical anatomy are demonstrated.

[International trends of applied ecology and its future development in China].

PubMed

Zhou, Qixing; Sun, Shunjiang

2002-07-01

Internationally applied ecology was born around 25-40 years ago in order to adapt and serve the needs of mitigating increasingly environmental pollution and ecological destroy in developed western countries at that time. All the times applied ecological principles thus underpin most efforts at solving increasingly deterioration of natural resources and serious eco-environmental problems as its keystone and researching kernel with the development of the subject. At the advent of the 21st century, human beings enter into the age of applied ecology. There are five international features of applied ecology, including more attention to many-sided applications, special emphasis on the intersection with engineering, strongly keeping on mutual links with basic ecology, omnidirectional adoption of new methods and new technology, and side-by-side trends of microcosmic mechanisms and macroscopical regulation. Although we must connect with international applied ecology and absorb distillates from the subject in developed western countries, development of applied ecology in China in the future, in particular, at the beginnings of the 21st century should not deviate from aiming at the solution of increasingly environmental pollution and ecological destroy that is one of the most important basic situations of the country.

Assessing the feasibility of implementing low-cost virtual reality therapy during routine burn care.

PubMed

Ford, Cameron G; Manegold, Ellen M; Randall, Cameron L; Aballay, Ariel M; Duncan, Christina L

2018-06-01

Burn care often involves procedures that result in significant pain experiences for patients which, in turn, can lead to poorer physical and psychological health outcomes. Distraction and virtual reality (VR) are an effective adjunct to pharmacological interventions in reducing pain. Much of the research that has demonstrated efficacy for VR in burn care has involved expensive and extensive technology. Thus, identifying cost-effective, feasible, acceptable, and effective approaches to apply distraction within routine burn care is important. The objective of this mixed-methods study was to evaluate key stakeholder (i.e., patients, providers) perceptions of feasibility, acceptability, and effectiveness for the use of low-cost VR technology during routine burn care with adult patients. Ten adult patients used VR during burn care dressing changes in an outpatient clinic setting, after which they completed a satisfaction survey and individual qualitative interview. Providers also completed a satisfaction/perception survey after each participant's care. Quantitative and qualitative results from both patient and provider perspectives consistently supported the feasibility and utility of applying low-cost VR technology in this outpatient burn clinic setting. Special considerations (e.g., aspects to consider when choosing an apparatus or application) stemming from stakeholder feedback are discussed. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

All two-loop maximally helicity-violating amplitudes in multi-Regge kinematics from applied symbology

NASA Astrophysics Data System (ADS)

Prygarin, Alexander; Spradlin, Marcus; Vergu, Cristian; Volovich, Anastasia

2012-04-01

Recent progress on scattering amplitudes has benefited from the mathematical technology of symbols for efficiently handling the types of polylogarithm functions which frequently appear in multiloop computations. The symbol for all two-loop maximally helicity violating amplitudes in planar supersymmetric Yang-Mills theory is known, but explicit analytic formulas for the amplitudes are hard to come by except in special limits where things simplify, such as multi-Regge kinematics. By applying symbology we obtain a formula for the leading behavior of the imaginary part (the Mandelstam cut contribution) of this amplitude in multi-Regge kinematics for any number of gluons. Our result predicts a simple recursive structure which agrees with a direct Balitsky-Fadin-Kuraev-Lipatov computation carried out in a parallel publication.

Workshop on body composition in basic and clinical research and the emerging technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wielopolski, L.

A special one-day workshop was held to review the status, the need for, and the future role of BNL in the Body Composition Analysis Program (BCAP). Two speakers succinctly outlined the status and future new developments using gamma nuclear resonance technology as it applies to BCAP. Seven speakers from three institutions outlined the continued need for BCAP and presented new clinical applications of BCAP in theirs respective fields of expertise. Extensive increase in the use of surrogate instrumentation, e.g., DXA and BIA, in BCAP was recognized as a significant contributing factor to the growth in BCAP. The growing role ofmore » MRI in BCAP was also emphasized. In light of these developments BCAP at BNL, with its specialized In Vivo Neutron Activation (IVNA) facilities, was recognized as a unique user oriented resource that may serve the community hospitals in the area. Three regional large institutions expressed their desire to use these facilities. In addition, IVNA provides direct measure of the human compartments in vivo, thus providing a gold standard for the surrogate methodologies that are in use or to be developed. It was strongly felt that there is a need for a calibration center with a national stature for the different methodologies for in vivo measurements, a role that befits very well a national laboratory. This offers an exquisite justification for DOE to support this orphan technology and to develop BCAP at BNL to, 1, provide a user oriented regional resource, 2, provide a national reference laboratory, and 3, develop new advanced technologies for BCAP.« less

Influence of environment factors on humidity conditions of selected external wall solutions in a heated building

NASA Astrophysics Data System (ADS)

Kaczmarek, Anna

2017-10-01

Contemporary single-family houses in Poland are often built during 3 quarters of a year (spring to autumn) are usually settled in a winter season. It is a special case when exploitation humidity coincides with technological one, causing unfavourable humidity conditions during the first years of exploitation. In consequence, thermal parameters of partitions differ from those assumed in the project. In construction stage the humidity state of a wall stabilizes as a result of water: associated with storage, entered technologically during wall construction and plastering, coming from rainfall. Thermo-insulation materials are built-in at dry state. During erection and exploitation of a building their thermal conductivity is changing depending on humidity conditions. According to building rules, construction humidity should be removed from a partition before the building transfer to usage, because it lowers the thermal partition insulation ability and increases air humidity of building interior. Walls are plastered and insulated in condition of simultaneous presence of atmospheric and technological humidity which cause special humidity condition during first years of exploitation. As a consequence, heating costs are substantially higher. In this article the results of simulation are shown performed with WUFI ®PRO 5 software, which was intended to define the time necessary for reaching the stabilised humidity in selected solutions of two-layer walls applied in a heated building. In the research performed, the partition orientation along geographic directions, short and long wave radiation, and environment humidity (air humidity, driving rain) coincidence with technological humidity in assumed wall solutions were taken into account.

Physical interpretation and development of ultrasonic nondestructive evaluation techniques applied to the quantitative characterization of textile composite materials

NASA Technical Reports Server (NTRS)

Miller, James G.

1994-01-01

In this Progress Report, we describe our continuing research activities concerning the development and implementation of advanced ultrasonic nondestructive evaluation methods applied to the inspection and characterization of complex composite structures. We explore the feasibility of implementing medical linear array imaging technology as a viable ultrasonic-based nondestructive evaluation method to inspect and characterize complex materials. As an initial step toward the application of linear array imaging technology to the interrogation of a wide range of complex composite structures, we present images obtained using an unmodified medical ultrasonic imaging system of two epoxy-bonded aluminum plate specimens, each with intentionally disbonded regions. These images are compared with corresponding conventional ultrasonic contact transducer measurements in order to assess whether these images can detect disbonded regions and provide information regarding the nature of the disbonded region. We present a description of a standoff/delay fixture which has been designed, constructed, and implemented on a Hewlett-Packard SONOS 1500 medical imaging system. This standoff/delay fixture, when attached to a 7.5 MHz linear array probe, greatly enhances our ability to interrogate flat plate specimens. The final section of this Progress Report describes a woven composite plate specimen that has been specially machined to include intentional flaws. This woven composite specimen will allow us to assess the feasibility of applying linear array imaging technology to the inspection and characterization of complex textile composite materials. We anticipate the results of this on-going investigation may provide a step toward the development of a rapid, real-time, and portable method of ultrasonic inspection and characterization based on linear array technology.

Do diseases have a prestige hierarchy? A survey among physicians and medical students.

PubMed

Album, Dag; Westin, Steinar

2008-01-01

Surveys have shown that the prestige of medical specialities is ordered hierarchically. We investigate whether similar tacit agreement in the medical community also applies to diseases, since such rankings can affect priority settings in medical practice. A cross-sectional survey was performed in three samples of physicians and medical students in Norway in 2002. A questionnaire was sent to 305 senior doctors (response rate, 79%), 500 general practitioners (response rate, 65%) and 490 final-year medical students (response rate, 64%). Outcome measures were ratings on a 1-9 scale of the prestige these respondents believed most health personnel would accord to a sample set of 38 different diseases as well as 23 medical specialities. Both diseases and specialities were clearly and consistently ranked according to prestige. Myocardial infarction, leukaemia and brain tumour were among the highest ranked, and fibromyalgia and anxiety neurosis were among the lowest. Among specialities, neurosurgery and thoracic surgery were accorded the highest rank, and geriatrics and dermatovenerology the lowest. Our interpretation of the data is that diseases and specialities associated with technologically sophisticated, immediate and invasive procedures in vital organs located in the upper parts of the body are given high prestige scores, especially where the typical patient is young or middle-aged. At the other end, low prestige scores are given to diseases and specialities associated with chronic conditions located in the lower parts of the body or having no specific bodily location, with less visible treatment procedures, and with elderly patients.

The classification of explosion-proof protected induction motor into adequate temperature and efficiency class

NASA Astrophysics Data System (ADS)

Brinovar, Iztok; Srpčič, Gregor; Seme, Sebastijan; Štumberger, Bojan; Hadžiselimović, Miralem

2017-07-01

This article deals with the classification of explosion-proof protected induction motors, which are used in hazardous areas, into adequate temperature and efficiency class. Hazardous areas are defined as locations with a potentially explosive atmosphere where explosion may occur due to present of flammable gasses, liquids or combustible dusts (industrial plants, mines, etc.). Electric motors and electrical equipment used in such locations must be specially designed and tested to prevent electrical initiation of explosion due to high surface temperature and arcing contacts. This article presents the basic tests of three-phase explosion-proof protected induction motor with special emphasis on the measuring system and temperature rise test. All the measurements were performed with high-accuracy instrumentation and accessory equipment and carried out at the Institute of energy technology in the Electric machines and drives laboratory and Applied electrical engineering laboratory.

Precoding based channel prediction for underwater acoustic OFDM

NASA Astrophysics Data System (ADS)

Cheng, En; Lin, Na; Sun, Hai-xin; Yan, Jia-quan; Qi, Jie

2017-04-01

The life duration of underwater cooperative network has been the hot topic in recent years. And the problem of node energy consuming is the key technology to maintain the energy balance among all nodes. To ensure energy efficiency of some special nodes and obtain a longer lifetime of the underwater cooperative network, this paper focuses on adopting precoding strategy to preprocess the signal at the transmitter and simplify the receiver structure. Meanwhile, it takes into account the presence of Doppler shifts and long feedback transmission delay in an underwater acoustic communication system. Precoding technique is applied based on channel prediction to realize energy saving and improve system performance. Different precoding methods are compared. Simulated results and experimental results show that the proposed scheme has a better performance, and it can provide a simple receiver and realize energy saving for some special nodes in a cooperative communication.

Special Issue: Honey Bee Viruses

PubMed Central

Gisder, Sebastian; Genersch, Elke

2015-01-01

Pollination of flowering plants is an important ecosystem service provided by wild insect pollinators and managed honey bees. Hence, losses and declines of pollinating insect species threaten human food security and are of major concern not only for apiculture or agriculture but for human society in general. Honey bee colony losses and bumblebee declines have attracted intensive research interest over the last decade and although the problem is far from being solved we now know that viruses are among the key players of many of these bee losses and bumblebee declines. With this special issue on bee viruses we, therefore, aimed to collect high quality original papers reflecting the current state of bee virus research. To this end, we focused on newly discovered viruses (Lake Sinai viruses, bee macula-like virus), or a so far neglected virus species (Apis mellifera filamentous virus), and cutting edge technologies (mass spectrometry, RNAi approach) applied in the field. PMID:26702462

Special Issue: Honey Bee Viruses.

PubMed

Gisder, Sebastian; Genersch, Elke

2015-10-01

Pollination of flowering plants is an important ecosystem service provided by wild insect pollinators and managed honey bees. Hence, losses and declines of pollinating insect species threaten human food security and are of major concern not only for apiculture or agriculture but for human society in general. Honey bee colony losses and bumblebee declines have attracted intensive research interest over the last decade and although the problem is far from being solved we now know that viruses are among the key players of many of these bee losses and bumblebee declines. With this special issue on bee viruses we, therefore, aimed to collect high quality original papers reflecting the current state of bee virus research. To this end, we focused on newly discovered viruses (Lake Sinai viruses, bee macula-like virus), or a so far neglected virus species (Apis mellifera filamentous virus), and cutting edge technologies (mass spectrometry, RNAi approach) applied in the field.

The systems approach for applying artificial intelligence to space station automation (Invited Paper)

NASA Astrophysics Data System (ADS)

Grose, Vernon L.

1985-12-01

The progress of technology is marked by fragmentation -- dividing research and development into ever narrower fields of specialization. Ultimately, specialists know everything about nothing. And hope for integrating those slender slivers of specialty into a whole fades. Without an integrated, all-encompassing perspective, technology becomes applied in a lopsided and often inefficient manner. A decisionary model, developed and applied for NASA's Chief Engineer toward establishment of commercial space operations, can be adapted to the identification, evaluation, and selection of optimum application of artificial intelligence for space station automation -- restoring wholeness to a situation that is otherwise chaotic due to increasing subdivision of effort. Issues such as functional assignments for space station task, domain, and symptom modules can be resolved in a manner understood by all parties rather than just the person with assigned responsibility -- and ranked by overall significance to mission accomplishment. Ranking is based on the three basic parameters of cost, performance, and schedule. This approach has successfully integrated many diverse specialties in situations like worldwide terrorism control, coal mining safety, medical malpractice risk, grain elevator explosion prevention, offshore drilling hazards, and criminal justice resource allocation -- all of which would have otherwise been subject to "squeaky wheel" emphasis and support of decision-makers.

Engaging Students in Modeling as an Epistemic Practice of Science: An Introduction to the Special Issue of the "Journal of Science Education and Technology"

ERIC Educational Resources Information Center

Campbell, Todd; Oh, Phil Seok

2015-01-01

This article provides an introduction for the special issue of the "Journal of Science Education and Technology" focused on science teaching and learning with models. The article provides initial framing for questions that guided the special issue. Additionally, based on our careful review of each of these articles, some discussion of…

Enhancing success in transition service coordinators: use of transformational leadership.

PubMed

Rearick, Ellen

2007-01-01

The lifespan of children with special healthcare needs has been extended because of improved technology and medical advances. Successful transition to the adult arena of healthcare, social services, and education by adolescents with special healthcare needs (ASHCN) is lacking. The transition service coordinator (TSC) is a multifaceted role of advanced practice nursing that provides highly specialized transition services to adolescents with special healthcare needs. The use of key concepts from the transformational leadership theory may improve healthcare outcomes. This article applies to pediatric and adult primary care and case management services that serve adolescents with special healthcare needs. Employing key concepts of transformational leadership theory will enhance the success of the TSC to improve both collaboration among stakeholders in the transitional team and young adults' transition to the world of adult services. Enhanced communication resulting in improved sharing of information, understanding of the stakeholder roles, and provision of formal linkages between pediatric and adult medical providers is a significant outcome affecting the ASHCN. Improved collaboration will produce a smooth transition for the ASHCN to the world of adult social services education, and employment. Incorporating the transformational leadership dimensions of idealized influence, inspirational motivation intellectual stimulation, and individualized consideration will enhance the ability of the TSC to improve collaboration among stakeholders in the transitional team and the quality of services for the ASHCN.

"Connecting worlds - a view on microfluidics for a wider application".

PubMed

Fernandes, Ana C; Gernaey, Krist V; Krühne, Ulrich

From its birth, microfluidics has been referenced as a revolutionary technology and the solution to long standing technological and sociological issues, such as detection of dilute compounds and personalized healthcare. Microfluidics has for example been envisioned as: (1) being capable of miniaturizing industrial production plants, thereby increasing their automation and operational safety at low cost; (2) being able to identify rare diseases by running bioanalytics directly on the patient's skin; (3) allowing health diagnostics in point-of-care sites through cheap lab-on-a-chip devices. However, the current state of microfluidics, although technologically advanced, has so far failed to reach the originally promised widespread use. In this paper, some of the aspects are identified and discussed that have prevented microfluidics from reaching its full potential, especially in the chemical engineering and biotechnology fields, focusing mainly on the specialization on a single target of most microfluidic devices and offering a perspective on the alternate, multi-use, "plug and play" approach. Increasing the flexibility of microfluidic platforms, by increasing their compatibility with different substrates, reactions and operation conditions, and other microfluidic systems is indeed of surmount importance and current academic and industrial approaches to modular microfluidics are presented. Furthermore, two views on the commercialization of plug-and-play microfluidics systems, leading towards improved acceptance and more widespread use, are introduced. A brief review of the main materials and fabrication strategies used in these fields, is also presented. Finally, a step-wise guide towards the development of microfluidic systems is introduced with special focus on the integration of sensors in microfluidics. The proposed guidelines are then applied for the development of two different example platforms, and to three examples taken from literature. With this work, we aim to provide an interesting perspective on the field of microfluidics when applied to chemical engineering and biotechnology studies, as well as to contribute with potential solutions to some of its current challenges. Copyright © 2018 Elsevier Inc. All rights reserved.

20 CFR 416.264 - When does the special SSI eligibility status apply.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false When does the special SSI eligibility status apply. 416.264 Section 416.264 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Eligibility Special Provisions for People Who Work Despite A...

40 CFR 1042.670 - Special provisions for gas turbine engines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND VESSELS Special Compliance Provisions § 1042.670 Special provisions for gas turbine engines. The provisions of this section apply for gas turbine engines. (a) Implementation schedule. The requirements of this part do not apply for gas turbine engines below 600 kW before the 2014 model year. The...

40 CFR 1042.670 - Special provisions for gas turbine engines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AND VESSELS Special Compliance Provisions § 1042.670 Special provisions for gas turbine engines. The provisions of this section apply for gas turbine engines. (a) Implementation schedule. The requirements of this part do not apply for gas turbine engines below 600 kW before the 2014 model year. The...

20 CFR 416.264 - When does the special SSI eligibility status apply.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false When does the special SSI eligibility status apply. 416.264 Section 416.264 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Eligibility Special Provisions for People Who Work Despite A...

20 CFR 416.264 - When does the special SSI eligibility status apply.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false When does the special SSI eligibility status apply. 416.264 Section 416.264 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Eligibility Special Provisions for People Who Work Despite A...

20 CFR 416.264 - When does the special SSI eligibility status apply.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false When does the special SSI eligibility status apply. 416.264 Section 416.264 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Eligibility Special Provisions for People Who Work Despite A...

The Role of Mechanized Services in the Provision of Information with Special Reference to the University Environment.

ERIC Educational Resources Information Center

Heim, Kathleen M.

The use, history, and role of machine-readable data base technology is discussed. First the development of data base technology is traced from its beginnings as a special resource for science and technology to its broader use in universities, with descriptions of some specific services. Next the current status of mechanized information services in…

Attitudes and Opinions of Special Education Candidate Teachers Regarding Digital Technology

ERIC Educational Resources Information Center

Ozdamli, Fezile

2017-01-01

Parallel to the rapid development of information and communication technology, the demand for its use in schools and classroom is increasing. So, the purpose of this study is to determine the attitudes and views of students who will be special education teachers in the future regarding digital technology on the use in education. A mixed method,…

Preparing Special Education Teachers for Teaching Mathematics and Science with Technology by Integrating the TPACK Framework into the Curriculum: A Study of Teachers' Perceptions

ERIC Educational Resources Information Center

Tournaki, Nelly; Lyublinskaya, Irina

2014-01-01

This study examined the development of Technological Pedagogical And Content Knowledge (TPACK) in mathematics and science of pre-service special education teachers via one course. The course focused on the three domains of knowledge related specifically to integrating instructional technology into mathematics and science teaching and learning…

Usability research study of a specially engineered sonic powered toothbrush with unique sensing and control technologies.

PubMed

Hunter, Gail; Burns, Laurie; Bone, Brian; Mintel, Thomas; Jimenez, Eduardo

2012-01-01

This paper summarizes the results of a longitudinal usability research study of a specially engineered sonic powered toothbrush with unique sensing and control technologies. The usability test was conducted with fourteen (14) consumers from the St. Louis, MO, USA area who use manual toothbrushes. The study consisted of consumers using the specially engineered sonic powered toothbrush with unique sensing and control technologies for three weeks. During the study, users participated in four toothbrush trials during weekly visits to the research facility. These trials were videotaped and were analyzed regarding brushing time, behavior, and technique. In addition, the users were required to use the toothbrush twice a day for their at-home brushing. The toothbrush had a positive impact on consumers' tooth brushing behavior. Users spent more time brushing their teeth with this toothbrush as compared to their manual toothbrush. In addition, users spent more time keeping the sonic toothbrush in the recommended angle during use. Finally, users perceived their teeth to be cleaner when using the specially engineered sonic powered toothbrush with unique sensing and control technologies. The specially engineered sonic powered toothbrush with unique sensing and control technologies left a positive impression on the users. The users perceived the toothbrush to clean their teeth better than a manual toothbrush.

Societal and economic valuation of technology-transfer deals

NASA Astrophysics Data System (ADS)

Holmes, Joseph S., Jr.

2009-09-01

The industrial adoption of concepts such as open innovation brings new legitimacy to activities technology-transfer professionals have conducted for over 20 years. This movement highlights the need for an increased understanding of the valuation of intellectual property (IP) and technology-transfer deals. Valuation, though a centerpiece of corporate finance, is more challenging when applied to the inherent uncertainty surrounding innovation. Technology-transfer professionals are often overwhelmed by the complexity and data requirements of valuation techniques and skeptical of their applicability to and utility for technology transfer. The market longs for an approach which bridges the gap between valuation fundamentals and technology-transfer realities. This paper presents the foundations of a simple, flexible, precise/accurate, and useful framework for considering the valuation of technology-transfer deals. The approach is predicated on a 12-factor model—a 3×4 value matrix predicated on categories of economic, societal, and strategic value. Each of these three categories consists of three core subcategories followed by a fourth "other" category to facilitate inevitable special considerations. This 12-factor value matrix provides a framework for harvesting data during deals and for the application of best-of-breed valuation techniques which can be employed on a per-factor basis. Future work will include framework implementation within a database platform.

A review of fracture mechanics life technology

NASA Technical Reports Server (NTRS)

Besuner, P. M.; Harris, D. O.; Thomas, J. M.

1986-01-01

Lifetime prediction technology for structural components subjected to cyclic loads is examined. The central objectives of the project are: (1) to report the current state of the art, and (2) recommend future development of fracture mechanics-based analytical tools for modeling subcritical fatigue crack growth in structures. Of special interest is the ability to apply these tools to practical engineering problems and the developmental steps necessary to bring vital technologies to this stage. The authors conducted a survey of published literature and numerous discussions with experts in the field of fracture mechanics life technology. One of the key points made is that fracture mechanics analyses of crack growth often involve consideration of fatigue and fracture under extreme conditions. Therefore, inaccuracies in predicting component lifetime will be dominated by inaccuracies in environment and fatigue crack growth relations, stress intensity factor solutions, and methods used to model given loads and stresses. Suggestions made for reducing these inaccuracies include development of improved models of subcritical crack growth, research efforts aimed at better characterizing residual and assembly stresses that can be introduced during fabrication, and more widespread and uniform use of the best existing methods.

Sodium-sulfur technology evaluation at Argonne National Laboratory

NASA Astrophysics Data System (ADS)

Mulcahey, T. P.; Tummillo, A. F.; Hogrefe, R. L.; Christianson, C. C.; Biwer, R.; Webster, C. E.; Lee, J.; Miller, J. F.; Marr, J. J.; Smaga, J. A.

The Analysis and Diagnostics Laboratory (ADL) at Argonne National Laboratory has completed evaluation of the Ford Aerospace and Communication Corp. (FACC) technology in the form of four load-levelling (LL) cells, five electric vehicle (EV) cells, and a sub-battery of 89 series connected EV cells. The ADL also has initiated evaluation of the Chloride Silent Power Limited (CSPL) sodium-sulfur (PB) battery technology in the form of 8 individual cells. The evaluation of the FACC-LL cells consisted of an abbreviated performance characterization followed by life-cycle tests on two individual cells and life-cycle tests only on the two other individual cells. The evaluation indicated that the technology was improving, but long-term (life) reliability was not yet adequate for utility applications. The cells exhibited individual cycle lives ranging from 659 to over 1366 cycles, which is equivalent to 2 1/2 to 5 1/2 years in utility use. It was also found that full-cell capacity could only be maintained by applying a special charge regime, regularly or periodically, that consisted of a constant-current followed by a constant-voltage.

A review of fracture mechanics life technology

NASA Technical Reports Server (NTRS)

Thomas, J. M.; Besuner, P. M.; Harris, D. O.

1985-01-01

Current lifetime prediction technology for structural components subjected to cyclic loads was reviewed. The central objectives of the project were to report the current state of and recommend future development of fracture mechanics-based analytical tools for modeling and forecasting subcritical fatigue crack growth in structures. Of special interest to NASA was the ability to apply these tools to practical engineering problems and the developmental steps necessary to bring vital technologies to this stage. A survey of published literature and numerous discussions with experts in the field of fracture mechanics life technology were conducted. One of the key points made is that fracture mechanics analyses of crack growth often involve consideration of fatigue and fracture under extreme conditions. Therefore, inaccuracies in predicting component lifetime will be dominated by inaccuracies in environment and fatigue crack growth relations, stress intensity factor solutions, and methods used to model given loads and stresses. Suggestions made for reducing these inaccuracies include: development of improved models of subcritical crack growth, research efforts aimed at better characterizing residual and assembly stresses that can be introduced during fabrication, and more widespread and uniform use of the best existing methods.

Iowa Powder Atomization Technologies

ScienceCinema

Ricken, Joel and Heidloff, Andrew

2018-05-07

The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

Chemistry Division annual progress report for period ending April 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poutsma, M.L.; Ferris, L.M.; Mesmer, R.E.

1993-08-01

The Chemistry Division conducts basic and applied chemical research on projects important to DOE`s missions in sciences, energy technologies, advanced materials, and waste management/environmental restoration; it also conducts complementary research for other sponsors. The research are arranged according to: coal chemistry, aqueous chemistry at high temperatures and pressures, geochemistry, chemistry of advanced inorganic materials, structure and dynamics of advanced polymeric materials, chemistry of transuranium elements and compounds, chemical and structural principles in solvent extraction, surface science related to heterogeneous catalysis, photolytic transformations of hazardous organics, DNA sequencing and mapping, and special topics.

Reinforcement learning in computer vision

NASA Astrophysics Data System (ADS)

Bernstein, A. V.; Burnaev, E. V.

2018-04-01

Nowadays, machine learning has become one of the basic technologies used in solving various computer vision tasks such as feature detection, image segmentation, object recognition and tracking. In many applications, various complex systems such as robots are equipped with visual sensors from which they learn state of surrounding environment by solving corresponding computer vision tasks. Solutions of these tasks are used for making decisions about possible future actions. It is not surprising that when solving computer vision tasks we should take into account special aspects of their subsequent application in model-based predictive control. Reinforcement learning is one of modern machine learning technologies in which learning is carried out through interaction with the environment. In recent years, Reinforcement learning has been used both for solving such applied tasks as processing and analysis of visual information, and for solving specific computer vision problems such as filtering, extracting image features, localizing objects in scenes, and many others. The paper describes shortly the Reinforcement learning technology and its use for solving computer vision problems.

Food and agricultural biotechnology: a summary and analysis of ethical concerns.

PubMed

Thompson, Paul B; Hannah, William

2008-01-01

The range of social and ethical concerns that have been raised in connection with food and agricultural biotechnology is exceedingly broad. Many of these deal with risks and possible outcomes that are not unique to crops or animals developed using recombinant DNA. Food safety, animal welfare, socio-economic and environmental impacts, as well as shifts in power relations or access to technology raise concerns that might be generalized to many technologies. These aspects of the controversy over biotechnology are analyzed below as elements of general technological ethics, and key norms or values pertinent to each of these categories are specified in some detail. However, a number of special concerns unique to the use of rDNA in manipulating plant and animal genomes have been raised, and these are reviewed as well. The chapter concludes by reviewing two broad policy strategies for responding to the issues, one involving labels and consumer consent, the other applying the precautionary principle.

Toward the Era of a One-Stop Imaging Service Using an Angiography Suite for Neurovascular Disorders

PubMed Central

Hung, Sheng-Che; Lin, Chung-Jung; Chang, Feng-Chi; Luo, Chao-Bao; Teng, Michael Mu-Huo; Chang, Cheng-Yen

2013-01-01

Transportation of patients requiring multiple diagnostic and imaging-guided therapeutic modalities is unavoidable in current radiological practice. This clinical scenario causes time delays and increased risk in the management of stroke and other neurovascular emergencies. Since the emergence of flat-detector technology in imaging practice in recent decades, studies have proven that flat-detector X-ray angiography in conjunction with contrast medium injection and specialized reconstruction algorithms can provide not only high-quality and high-resolution CT-like images but also functional information. This improvement in imaging technology allows quantitative assessment of intracranial hemodynamics and, subsequently in the same imaging session, provides treatment guidance for patients with neurovascular disorders by using only a flat-detector angiographic suite—a so-called one-stop quantitative imaging service (OSIS). In this paper, we review the recent developments in the field of flat-detector imaging and share our experience of applying this technology in neurovascular disorders such as acute ischemic stroke, cerebral aneurysm, and stenoocclusive carotid diseases. PMID:23762863

20 CFR 10.6 - What special statutory definitions apply to dependents and survivors?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false What special statutory definitions apply to dependents and survivors? 10.6 Section 10.6 Employees' Benefits OFFICE OF WORKERS' COMPENSATION PROGRAMS...' COMPENSATION ACT, AS AMENDED General Provisions Definitions and Forms § 10.6 What special statutory definitions...

Special Education Teachers' Perceptions and Intentions toward Data Collection

ERIC Educational Resources Information Center

Ruble, Lisa A.; McGrew, John H.; Wong, Wing Hang; Missall, Kristen N.

2018-01-01

Although data-based decision making is an evidence-based practice, many special educators have difficulty applying the practice within daily routines. We applied the theory of planned behavior (TPB) to understand the influences that promote or hinder early childhood special educators' intentions to collect data. We assessed three influences on…

The history of transportation, with a peak into the future

NASA Technical Reports Server (NTRS)

Anderson, John D., Jr.

1996-01-01

In the first part of this presentation, a general historical review of the heydays of various modes of transportation will be given, where 'heydays' will be interpreted as periods of fundamental technological development. With this as background, focus will then be placed on the airplane -- the mode of transportation that has changed the world in the 20th century, and which in the minds of many has been the most important technological development in this century. The technical history of air transportation (the airplane) will be reviewed, with special emphasis on the aerodynamic evolution of the airplane. Some specific examples of pivotal technical advances (and breakthroughs) from the history of applied aerodynamics will be discussed. Finally, this historical perspective will be used to help us peek into the future of transportation in the 21st century.

In the right place at the right time: visualizing and understanding mRNA localization

PubMed Central

Buxbaum, Adina R.; Haimovich, Gal

2015-01-01

The spatial regulation of protein translation is an efficient way to create functional and structural asymmetries in cells. Recent research has furthered our understanding of how individual cells spatially organize protein synthesis, by applying innovative technology to characterize the relationship between mRNAs and their regulatory proteins, single-mRNA trafficking dynamics, physiological effects of abrogating mRNA localization in vivo and for endogenous mRNA labelling. The implementation of new imaging technologies has yielded valuable information on mRNA localization, for example, by observing single molecules in tissues. The emerging movements and localization patterns of mRNAs in morphologically distinct unicellular organisms and in neurons have illuminated shared and specialized mechanisms of mRNA localization, and this information is complemented by transgenic and biochemical techniques that reveal the biological consequences of mRNA mislocalization. PMID:25549890

Inclusive design--assistive technology for people with cerebral palsy.

PubMed

Heidrich, Regina; Bassani, Patrícia

2012-01-01

The first sentence of the Abstract should follow the word "Abstract." on the same line. The abstract should be clear, descriptive, self-explanatory and no longer than 200 words. It should also be suitable for publication in abstracting services. Do not include references or formulae in the abstract. This study reports the work of the Inclusive Design research project conducted with a group of children with cerebral palsy Our project has been working with Assistive Technology and has been developing an expanded mouse and a keyboard. Nowadays, we are working as a researcher of Cognitive Ergonomics and of Inclusive Education. The goal of our project is to establish an interdisciplinary study that focus the developing of a research in Ergonomics Design, contributing to improve the assistance to people with special needs. One applied the pedagogical approach, using Vygotsky's Social-historic Theory that advocates the concept of each individual's experiences are important to improve them. The development methodology was based on user-centered design. The results showed that as long as the students applied the new technologies they developed superior psychological processes towards social interaction, autonomy, taking part in class activities more efficiently. Also, we verified how important the new technologies in class were, considering the methodologies, objectives full and effective described on this study. This way, we do hope, from the data obtained on this research, to contribute with the ones who believe that the improvement of handicap students' inclusion in class is a reality.

Informatics technology mimics ecology: dense, mutualistic collaboration networks are associated with higher publication rates.

PubMed

Sorani, Marco D

2012-01-01

Information technology (IT) adoption enables biomedical research. Publications are an accepted measure of research output, and network models can describe the collaborative nature of publication. In particular, ecological networks can serve as analogies for publication and technology adoption. We constructed network models of adoption of bioinformatics programming languages and health IT (HIT) from the literature.We selected seven programming languages and four types of HIT. We performed PubMed searches to identify publications since 2001. We calculated summary statistics and analyzed spatiotemporal relationships. Then, we assessed ecological models of specialization, cooperativity, competition, evolution, biodiversity, and stability associated with publications.Adoption of HIT has been variable, while scripting languages have experienced rapid adoption. Hospital systems had the largest HIT research corpus, while Perl had the largest language corpus. Scripting languages represented the largest connected network components. The relationship between edges and nodes was linear, though Bioconductor had more edges than expected and Perl had fewer. Spatiotemporal relationships were weak. Most languages shared a bioinformatics specialization and appeared mutualistic or competitive. HIT specializations varied. Specialization was highest for Bioconductor and radiology systems. Specialization and cooperativity were positively correlated among languages but negatively correlated among HIT. Rates of language evolution were similar. Biodiversity among languages grew in the first half of the decade and stabilized, while diversity among HIT was variable but flat. Compared with publications in 2001, correlation with publications one year later was positive while correlation after ten years was weak and negative.Adoption of new technologies can be unpredictable. Spatiotemporal relationships facilitate adoption but are not sufficient. As with ecosystems, dense, mutualistic, specialized co-habitation is associated with faster growth. There are rapidly changing trends in external technological and macroeconomic influences. We propose that a better understanding of how technologies are adopted can facilitate their development.

Research and application of self - propagating welding technology

NASA Astrophysics Data System (ADS)

Ma, Yunhe; Li, Zhizun; Wang, Jianjiang; Sun, Liming

2018-04-01

Self-propagating welding is an important application area of self-propagating high-temperature synthesis technology (SHS technology), suitable for special environment and special materials welding. This paper briefly introduces the principle of self - propagating welding and its technical characteristics, and briefly summarizes the current research and application of SHS welding around three aspects of thin film welding, welding of refractory welding and emergency welding of battlefield.

Orientation to Trades and Technology. A Curriculum Guide and Resource Book with Special Emphasis on the Needs of Women. Revised.

ERIC Educational Resources Information Center

Braundy, Marcia

This combination curriculum guide and resource book was developed in response to recommendations made by the instructors who attended the Women in Trades and Technology (WITT) conference of June 1986. It assists in the design and delivery of exploratory trade and technology courses that are responsive to the special needs of women learners…

Applied Optics Golden Anniversary commemorative reviews: introduction.

PubMed

Mait, Joseph N; Mendez, Eugenio; Peyghambarian, Nasser; Poon, T-C

2013-01-01

Applied Optics presents three special issues to end its retrospective of Applied Optics' 50 years. The special issues are interference, interferometry, and phase; imaging, optical processing, and telecommunications; and polarization and scattering. The issues, which contain 19 commemorative reviews from some of the journal's luminaries, are summarized.

Special Education Tchnology: A Federal Perspective.

ERIC Educational Resources Information Center

Johnson, James S.; Kaufman, Martin J.

1982-01-01

The Technology and Marketing Branch of Special Education programs within the US Department of Education has focused on promoting the availability, quality, and use of advances in education technology for handicapped persons. Activities have included assistance to developers, liaison with commercial publishers, and dissemination of information to…

Working with Students with Special Educational Needs in Greece: Teachers' Stressors and Coping Strategies

ERIC Educational Resources Information Center

Antoniou, Alexander-Stamatios; Polychroni, Fotini; Kotroni, Christina

2009-01-01

Few studies explore the specific sources of stress, and the coping strategies applied by teachers of children with special educational needs, particularly in small countries such as Greece. The present study investigated the specific work-related stressors affecting special educational needs teachers in Greece and the coping strategies applied by…

Advanced Technologies for Space Life Science Payloads on the International Space Station

NASA Technical Reports Server (NTRS)

Hines, John W.; Connolly, John P. (Technical Monitor)

1997-01-01

SENSORS 2000! (S2K!) is a specialized, high-performance work group organized to provide advanced engineering and technology support for NASA's Life Sciences spaceflight and ground-based research and development programs. In support of these objectives, S2K! manages NASA's Advanced Technology Development Program for Biosensor and Biotelemetry Systems (ATD-B), with particular emphasis on technologies suitable for Gravitational Biology, Human Health and Performance, and Information Technology and Systems Management. A concurrent objective is to apply and transition ATD-B developed technologies to external, non-NASA humanitarian (medical, clinical, surgical, and emergency) situations and to stimulate partnering and leveraging with other government agencies, academia, and the commercial/industrial sectors. A phased long-term program has been implemented to support science disciplines and programs requiring specific biosensor (i.e., biopotential, biophysical, biochemical, and biological) measurements from humans, animals (mainly primates and rodents), and cells under controlled laboratory and simulated microgravity situations. In addition to the technology programs described above, NASA's Life and Microgravity Sciences and Applications Office has initiated a Technology Infusion process to identify and coordinate the utilization and integration of advanced technologies into its International Space Station Facilities. This project has recently identified a series of technologies, tasks, and products which, if implemented, would significantly increase the science return, decrease costs, and provide improved technological capability. This presentation will review the programs described above and discuss opportunities for collaboration, leveraging, and partnering with NASA.

TECHNOLOGY IN EDUCATION. EDUCATION U.S.A. SPECIAL REPORT.

ERIC Educational Resources Information Center

WILSON, ROY K.; AND OTHERS

THE POSSIBLE RESULTS AND IMPLICATIONS OF THE NEW TECHNOLOGICAL DEVELOPMENTS IN EDUCATION ARE DISCUSSED, WITH SPECIAL ATTENTION TO THE CURRENT STATE OF THE ART, TEACHER-STUDENT RELATIONSHIPS, EDUCATION IN SLUM AREAS, INDIVIDUALIZED INSTRUCTION, A MODERNIZED LEARNING SYSTEM, EDUCATIONAL ADMINISTRATION AND FUNDING ON THE NATIONAL LEVEL, NECESSARY…

Modeling and Simulation: A Rationale for Implementing New Training Technologies.

ERIC Educational Resources Information Center

Mattoon, Joseph S.

1996-01-01

Describes and advocates various technologies which have modernized the Air Force's Specialized Undergraduate Pilot Training (SUPT). After outlining some theoretical background, the article provides details on student proficiency profiles, the portable electronic trainer, the unit training device, specialized visual and acoustic displays, and the…

Technologies as Rural Special Education Problem Solvers--A Status Report and Successful Strategies.

ERIC Educational Resources Information Center

Helge, Doris

Rural schools can help solve their special education problems by using advanced technology to provide instructional support (computer managed instruction, satellite television, library searches, resource networks, on-line testing), instructional applications (computer assisted instruction, reading machines, mobile vans, instructional television),…

Serving Mildly Handicapped Students in Technology Education.

ERIC Educational Resources Information Center

Scott, Michael L.; And Others

1985-01-01

Examines ways of meeting the needs of special education students in technology education. Discusses activity-oriented instruction, adding relevance to the instruction, the development of problem-solving and communication skills, the use of peer tutors, involving a special educator in industrial arts classes, safety concerns, and available…

The View Finder: International Perspectives on Special Education Technology. Volume 3.

ERIC Educational Resources Information Center

Edyburn, Dave L.; And Others

The four articles in this monograph present issues in the application of technology to special education from an international perspective. In the first chapter, "Augmentative and Alternative Communication Systems--Computer Applications for Individuals with Disabilities: An International Perspective," Richard Cardinali and George McMurdo…

Technology Enhanced Learning for People with Intellectual Disabilities and Cerebral Paralysis: The MAS Platform

NASA Astrophysics Data System (ADS)

Colomo-Palacios, Ricardo; Paniagua-Martín, Fernando; García-Crespo, Ángel; Ruiz-Mezcua, Belén

Education for students with disabilities now takes place in a wide range of settings, thus, including a wider range of assistive tools. As a result of this, one of the most interesting application domains of technology enhanced learning is related to the adoption of learning technologies and designs for people with disabilities. Following this unstoppable trend, this paper presents MAS, a software platform aimed to help people with severe intellectual disabilities and cerebral paralysis in their learning processes. MAS, as a technology enhanced learning platform, provides several tools that supports learning and monitoring for people with special needs, including adaptative games, data processing and monitoring tools. Installed in a special needs education institution in Madrid, Spain, MAS provides special educators with a tool that improved students education processes.

Design, Specification and Construction of Specialized Measurement System in the Experimental Building

NASA Astrophysics Data System (ADS)

Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

2017-10-01

Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

2001 Gordon Research Conference on Applied and Environmental Microbiology. Final progress report [agenda and attendee list

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drake, Harold

2001-07-26

The Gordon Research Conference on Applied and Environmental Microbiology was held at Connecticut College, New London, Connecticut, July 22-27, 2001. The conference was attended by 121 participants. The attendees represented the spectrum of endeavor in this field, coming from academia, industry, and government laboratories, and included US and foreign scientists, senior researchers, young investigators, and students. Emphasis was placed on current unpublished research and discussion of the future target areas in this field. There was a conscious effort to stimulate discussion about the key issues in the field today. Session topics included the following: Environmental and applied genomics, Cell-to-cell signalingmore » and multicellular behavior, Emerging technologies and methods, Novel metabolisms and ecosystems, Directed evolution of enzymes and pathways, Symbiotic and trophic relationships, Synthesis and application of novel biopolymers, and Microbes at the oxic-anoxic interface. There was also a special lecture titled ''Under the umbrella of the big tree: microbial biology into the 21st century.''« less

Radiation Effects and Hardening Techniques for Spacecraft Microelectronics

NASA Astrophysics Data System (ADS)

Gambles, J. W.; Maki, G. K.

2002-01-01

The natural radiation from the Van Allen belts, solar flares, and cosmic rays found outside of the protection of the earth's atmosphere can produce deleterious effects on microelectronics used in space systems. Historically civil space agencies and the commercial satellite industry have been able to utilize components produced in special radiation hardened fabrication process foundries that were developed during the 1970s and 1980s under sponsorship of the Departments of Defense (DoD) and Energy (DoE). In the post--cold war world the DoD and DoE push to advance the rad--hard processes has waned. Today the available rad--hard components lag two-plus technology node generations behind state- of-the-art commercial technologies. As a result space craft designers face a large performance gap when trying to utilize available rad--hard components. Compounding the performance gap problems, rad--hard components are becoming increasingly harder to get. Faced with the economic pitfalls associated with low demand versus the ever increasing investment required for integrated circuit manufacturing equipment most sources of rad--hard parts have simply exited this market in recent years, leaving only two domestic US suppliers of digital rad--hard components. This paper summarizes the radiation induced mechanisms that can cause digital microelectronics to fail in space, techniques that can be applied to mitigate these failure mechanisms, and ground based testing used to validate radiation hardness/tolerance. The radiation hardening techniques can be broken down into two classes, Hardness By Process (HBP) and Hardness By Design (HBD). Fortunately many HBD techniques can be applied to commercial fabrication processes providing space craft designer with radiation tolerant Application Specific Integrated Circuits (ASICs) that can bridge the performance gap between the special HBP foundries and the commercial state-of-the-art performance.

Implementing New Methods of Laser Marking of Items in the Nuclear Material Control and Accountability System at SSC RF-IPPE: An Automated Laser Marking System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regoushevsky, V I; Tambovtsev, S D; Dvukhsherstnov, V G

2009-05-18

For over ten years SSC RF-IPPE, together with the US DOE National Laboratories, has been working on implementing automated control and accountability methods for nuclear materials and other items. Initial efforts to use adhesive bar codes or ones printed (painted) onto metal revealed that these methods were inconvenient and lacked durability under operational conditions. For NM disk applications in critical stands, there is the additional requirement that labels not affect the neutron characteristics of the critical assembly. This is particularly true for the many stainless-steel clad disks containing highly enriched uranium (HEU) and plutonium that are used at SSC RF-IPPEmore » for modeling nuclear power reactors. In search of an alternate method for labeling these disks, we tested several technological options, including laser marking and two-dimensional codes. As a result, the method of laser coloring was chosen in combination with Data Matrix ECC200 symbology. To implement laser marking procedures for the HEU disks and meet all the nuclear material (NM) handling standards and rules, IPPE staff, with U.S. technical and financial support, implemented an automated laser marking system; there are also specially developed procedures for NM movements during laser marking. For the laser marking station, a Zenith 10F system by Telesis Technologies (10 watt Ytterbium Fiber Laser and Merlin software) is used. The presentation includes a flowchart for the automated system and a list of specially developed procedures with comments. Among other things, approaches are discussed for human-factor considerations. To date, markings have been applied to numerous steel-clad HEU disks, and the work continues. In the future this method is expected to be applied to other MC&A items.« less

Instrumentation and Controls Division progress report for the period July 1, 1986 to June 30, 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klobe, L.E.

1988-12-01

The Instrumentation and Controls (IandC) Division of Oak Ridge National Laboratory (ORNL) performs basic and applied instrumentation and controls research, development and design engineering, specialized instrument design and fabrication, and maintenance services for instruments, electronics, and computers. The IandC Division is one of the largest RandD organizations of its type among government laboratories, and it exists as the result of an organizational strategy to integrate ORNL's instrumentation and controls-related disciplines into one dedicated functional organization to increase the Laboratory's expertise and capabilities in these rapidly expanding, innovative areas of technology. The Division participates in the programs and projects of ORNLmore » by applying its expertise and capabilities in concert with other divisions to perform basic research and mission-oriented technology development. Many of the Division's RandD tasks that are a part of a larger ORNL program are of sufficient scope that the IandC effort constitutes a separate program element with direct funding and management responsibility within the Division. The activities of IandC include performance of an RandD task in IandC facilities, the participation of from one of many IandC engineers and scientists in a multidisciplinary team working in a specific research area or development project, design and fabrication of a special instrument or instrumentation system, or a few hours of maintenance service. In its support and maintenance work, the role of the IandC Division is to provide a level of expertise appropriate to complete a job successfully at minimum overall cost and time schedule---a role which involves IandC in almost all ORNL activities.« less

Preface to ISIF 2009 special issue of Journal of Applied Physics : science and technology of integrated functionalities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Auciello, O.; Dey, S.; Paz de Araujo, C.

2011-05-01

The science and technology of ferroelectric thin films and their applications have attracted many researchers and experienced tremendous progress in the past 20 years. The recent worldwide increase in commercial applications of ferroelectric devices such as smart cards based on nonvolatile ferroelectric random access memories is a symbol of both the maturity and the acceptance of the technology. The 21st International Symposium on Integrated Ferroelectrics (ISIF 2009), held on September 22 to October 2, 2009 in Colorado Springs, CO, provided a forum for the academic and national laboratories research community and industry to present and share their new findings, achievements,more » and opinions on integrated ferroelectrics and their applications. The International Symposium on Integrated Ferroelectrics hosted the ISIF 2009. This was the first year where the ISIF held the conference in its new format under the name of International Symposium on Integrated Functionalities. The General Chairs of the ISIF in consultation with the Advisory Board and the ISIF community decided to revise the focus of the conference in order to broaden the scope to the science and technology of multifunctional materials and devices. This decision was taken in view that a new paradigm in materials, materials integration, and devices is emerging with a view to the development of a new generation of micro- and nanoscale multifunctional devices. The program included three plenary presentations on diverse topics such as 'The Role of Nonvolatile Memory in Ubiquitous Computing,' 'Ferroelectrics and High Density Memory Technology,' 'Nanoscale Ferroelectrics and Interfaces: Size Effects,' four tutorial lectures on diverse topics, such as 'Magnetic Memory Applications,' 'Ferroelectrics and Ferroelectric Devices,' 'Challenges for High-K Dielectrics on High Mobility Channels,' 'Solar Cell Materials,' one poster session, and eight oral sessions. Thanks to the great efforts made by the ISIF organization committee and the session chairs, the conference successfully achieved its objectives and the work presented reflected very well the most recent advances of integrated ferroelectrics and their applications, as well as advances in other areas related to the new theme of Integrated Functionalities. Many aspects of ferroelectric, piezoelectric, high-K dielectric, magnetic, and phase change materials, including the science and technology of these materials in thin film form, integration with other thin film materials (metals or oxide electrodes), and fabrication of micro- and nanostructures based on these heterostructure layers, and device architecture and physics, were addressed from the experimental point of view. Work on theory and computer simulations of the mentioned materials and devices were discussed also with a view to the promising applications to multifunctional devices. In addition, the ISIF 2009 featured discussions of alternative nonvolatile memory concepts and materials, such as phase change memories, research on multiferroics and magnetoelectric materials, ferroelectric photovoltaics, and new directions on the science of perovskites such as biomolecular/polarizable interfaces, and bio-ferroelectric and other oxide interfaces. Following the standard submission and peer review process of Journal of Applied Physics, the selected papers presented in ISIF 2009 in Colorado Springs are published in this special issue. We believe that the papers in this special issue represent the forefront contributions to ISIF 2009 in the various areas of fundamental and applied science of integrated ferroelectrics and functionalities and their applications. We would like to take this opportunity to thank the following organizations and companies for their support and sponsorship for ISIF 2009, namely: Aixact Systems GMBH, Radiant Technologies, Symetrix Corporation, and Taylor and Francis Publishers. We would also like to thank the conference and session chairs, advisory and organizing committee members for their hard work that resulted in a very successful ISIF 2009, now in its new future-looking modality of Integrated Functionalities.« less

31 CFR 595.408 - Charitable contributions to specially designated terrorists.

Code of Federal Regulations, 2012 CFR

2012-07-01

... charitable contribution or donation of funds, goods, services,or technology to relieve human suffering, such as food, clothing or medicine, may be made to or for the benefit of a specially designated terrorist... contribute funds, goods, services or technology without knowledge or reason to know that the donation or...

31 CFR 595.408 - Charitable contributions to specially designated terrorists.

Code of Federal Regulations, 2011 CFR

2011-07-01

... charitable contribution or donation of funds, goods, services,or technology to relieve human suffering, such as food, clothing or medicine, may be made to or for the benefit of a specially designated terrorist... contribute funds, goods, services or technology without knowledge or reason to know that the donation or...

31 CFR 595.408 - Charitable contributions to specially designated terrorists.

Code of Federal Regulations, 2010 CFR

2010-07-01

... charitable contribution or donation of funds, goods, services,or technology to relieve human suffering, such as food, clothing or medicine, may be made to or for the benefit of a specially designated terrorist... contribute funds, goods, services or technology without knowledge or reason to know that the donation or...

IFLA General Conference, 1984. Special Libraries Division. Section on Science and Technology Libraries. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on scientific/technical information and libraries presented at the 1984 IFLA general conference include: (1) "Library Ethics and the Special Library Network in Science and Technology" (Dieter Schmidmaier, East Germany); (2) "The Dissemination of Patent Information by Libraries: An Example Demonstrating the Necessity of…

Activist Environmental Education and Moral Philosophy

ERIC Educational Resources Information Center

Burns, David Patrick; Norris, Stephen P.

2012-01-01

In this article the authors respond to a recent special issue of the "Canadian Journal of Science, Mathematics and Technology Education" (Alsop & Bencze, 2010) in which the role of environmental activism in science, mathematics, and technology education (SMTE) was addressed. Although they applaud this Special Issue's invitation to begin a new…

Assistive Technology Design in Special Education. Issue Brief 2.

ERIC Educational Resources Information Center

Burnette, Jane

The issue brief discusses technological principles, issues, and design features discovered or used by projects funded by the Office of Special Education Programs (OSEP). Information was obtained from interviews with project directors who were asked about their project experiences, the features and design principles essential to the success of…

Measurement of Irradiated Pyroprocessing Samples via Laser Induced Breakdown Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phongikaroon, Supathorn

The primary objective of this research is to develop an applied technology and provide an assessment to remotely measure and analyze the real time or near real time concentrations of used nuclear fuel (UNF) dissolute in electrorefiners. Here, Laser-Induced Breakdown Spectroscopy (LIBS), in UNF pyroprocessing facilities will be investigated. LIBS is an elemental analysis method, which is based on the emission from plasma generated by focusing a laser beam into the medium. This technology has been reported to be applicable in the media of solids, liquids (includes molten metals), and gases for detecting elements of special nuclear materials. The advantagesmore » of applying the technology for pyroprocessing facilities are: (i) Rapid real-time elemental analysis|one measurement/laser pulse, or average spectra from multiple laser pulses for greater accuracy in < 2 minutes; (ii) Direct detection of elements and impurities in the system with low detection limits|element specific, ranging from 2-1000 ppm for most elements; and (iii) Near non-destructive elemental analysis method (about 1 g material). One important challenge to overcome is achieving high-resolution spectral analysis to quantitatively analyze all important fission products and actinides. Another important challenge is related to accessibility of molten salt, which is heated in a heavily insulated, remotely operated furnace in a high radiation environment with an argon atmosphere.« less

From basic to applied research to improve outcomes for individuals who require augmentative and alternative communication: potential contributions of eye tracking research methods.

PubMed

Light, Janice; McNaughton, David

2014-06-01

In order to improve outcomes for individuals who require AAC, there is an urgent need for research across the full spectrum--from basic research to investigate fundamental language and communication processes, to applied clinical research to test applications of this new knowledge in the real world. To date, there has been a notable lack of basic research in the AAC field to investigate the underlying cognitive, sensory perceptual, linguistic, and motor processes of individuals with complex communication needs. Eye tracking research technology provides a promising method for researchers to investigate some of the visual cognitive processes that underlie interaction via AAC. The eye tracking research technology automatically records the latency, duration, and sequence of visual fixations, providing key information on what elements attract the individual's attention (and which ones do not), for how long, and in what sequence. As illustrated by the papers in this special issue, this information can be used to improve the design of AAC systems, assessments, and interventions to better meet the needs of individuals with developmental and acquired disabilities who require AAC (e.g., individuals with autism spectrum disorders, Down syndrome, intellectual disabilities of unknown origin, aphasia).

Best practices for architectural pavement treatments : final report.

DOT National Transportation Integrated Search

2010-03-01

Architectural Pavement Treatments are special treatments applied to pavements to enhance the aesthetic : character of the pavement and the surrounding environs in which they are applied. They achieve this objective : by imparting special colors and/o...

Technology 2.0: A Commentary on Progress, Challenges, and Next Steps.

PubMed

Jones, Deborah J

2017-11-01

This commentary highlights the importance and promise of the innovative strategies described in the Child Maltreatment special issue on "Technology 2.0: A Focus on the Newest Technological Advances in Child Maltreatment Research." The commentary first highlights the collective advancements reflected in the articles in the special issue, with a primary focus on how the authors' work addresses a general challenge in services research that is perhaps nowhere more problematic than in the field of maltreatment. Next, the commentary extends the discussion of these articles to raise remaining gaps in our knowledge, theory, and methodology, which must be the focus of ongoing research if the true potential of technology as a service delivery vehicle is to be realized. Finally, the commentary concludes with a call for subsequent research which will be inspired by the articles in this special issue.

Wicked Problems in Special and Inclusive Education

ERIC Educational Resources Information Center

Armstrong, David

2017-01-01

This special paper provides a critical overview of wicked problems in special and inclusive education. Practically, this paper provides a strategic framework for future special issues in the "Journal of Special Educational Needs". Critical attention is also given to the concept of a wicked problem when applied to research in special and…

Finite-Time Stability for Fractional-Order Bidirectional Associative Memory Neural Networks with Time Delays

NASA Astrophysics Data System (ADS)

Xu, Chang-Jin; Li, Pei-Luan; Pang, Yi-Cheng

2017-02-01

This paper is concerned with fractional-order bidirectional associative memory (BAM) neural networks with time delays. Applying Laplace transform, the generalized Gronwall inequality and estimates of Mittag-Leffler functions, some sufficient conditions which ensure the finite-time stability of fractional-order bidirectional associative memory neural networks with time delays are obtained. Two examples with their simulations are given to illustrate the theoretical findings. Our results are new and complement previously known results. Supported by National Natural Science Foundation of China under Grant Nos.~61673008, 11261010, 11101126, Project of High-Level Innovative Talents of Guizhou Province ([2016]5651), Natural Science and Technology Foundation of Guizhou Province (J[2015]2025 and J[2015]2026), 125 Special Major Science and Technology of Department of Education of Guizhou Province ([2012]011) and Natural Science Foundation of the Education Department of Guizhou Province (KY[2015]482)

Collaboration and decision making tools for mobile groups

NASA Astrophysics Data System (ADS)

Abrahamyan, Suren; Balyan, Serob; Ter-Minasyan, Harutyun; Degtyarev, Alexander

2017-12-01

Nowadays the use of distributed collaboration tools is widespread in many areas of people activity. But lack of mobility and certain equipment-dependency creates difficulties and decelerates development and integration of such technologies. Also mobile technologies allow individuals to interact with each other without need of traditional office spaces and regardless of location. Hence, realization of special infrastructures on mobile platforms with help of ad-hoc wireless local networks could eliminate hardware-attachment and be useful also in terms of scientific approach. Solutions from basic internet-messengers to complex software for online collaboration equipment in large-scale workgroups are implementations of tools based on mobile infrastructures. Despite growth of mobile infrastructures, applied distributed solutions in group decisionmaking and e-collaboration are not common. In this article we propose software complex for real-time collaboration and decision-making based on mobile devices, describe its architecture and evaluate performance.

Demonstrating artificial intelligence for space systems - Integration and project management issues

NASA Technical Reports Server (NTRS)

Hack, Edmund C.; Difilippo, Denise M.

1990-01-01

As part of its Systems Autonomy Demonstration Project (SADP), NASA has recently demonstrated the Thermal Expert System (TEXSYS). Advanced real-time expert system and human interface technology was successfully developed and integrated with conventional controllers of prototype space hardware to provide intelligent fault detection, isolation, and recovery capability. Many specialized skills were required, and responsibility for the various phases of the project therefore spanned multiple NASA centers, internal departments and contractor organizations. The test environment required communication among many types of hardware and software as well as between many people. The integration, testing, and configuration management tools and methodologies which were applied to the TEXSYS project to assure its safe and successful completion are detailed. The project demonstrated that artificial intelligence technology, including model-based reasoning, is capable of the monitoring and control of a large, complex system in real time.

Application of Tessellation in Architectural Geometry Design

NASA Astrophysics Data System (ADS)

Chang, Wei

2018-06-01

Tessellation plays a significant role in architectural geometry design, which is widely used both through history of architecture and in modern architectural design with the help of computer technology. Tessellation has been found since the birth of civilization. In terms of dimensions, there are two- dimensional tessellations and three-dimensional tessellations; in terms of symmetry, there are periodic tessellations and aperiodic tessellations. Besides, some special types of tessellations such as Voronoi Tessellation and Delaunay Triangles are also included. Both Geometry and Crystallography, the latter of which is the basic theory of three-dimensional tessellations, need to be studied. In history, tessellation was applied into skins or decorations in architecture. The development of Computer technology enables tessellation to be more powerful, as seen in surface control, surface display and structure design, etc. Therefore, research on the application of tessellation in architectural geometry design is of great necessity in architecture studies.

Development of a telemedicine model for emerging countries: a case study on pediatric oncology in Brazil.

PubMed

Hira, A Y; Nebel de Mello, A; Faria, R A; Odone Filho, V; Lopes, R D; Zuffo, M K

2006-01-01

This article discusses a telemedicine model for emerging countries, through the description of ONCONET, a telemedicine initiative applied to pediatric oncology in Brazil. The ONCONET core technology is a Web-based system that offers health information and other services specialized in childhood cancer such as electronic medical records and cooperative protocols for complex treatments. All Web-based services are supported by the use of high performance computing infrastructure based on clusters of commodity computers. The system was fully implemented on an open-source and free-software approach. Aspects of modeling, implementation and integration are covered. A model, both technologically and economically viable, was created through the research and development of in-house solutions adapted to the emerging countries reality and with focus on scalability both in the total number of patients and in the national infrastructure.

The history of infrastructures and the future of cyberinfrastructure in the Earth system sciences

NASA Astrophysics Data System (ADS)

Edwards, P. N.

2012-12-01

Infrastructures display similar historical patterns of inception, development, growth and decay. They typically begin as centralized systems which later proliferate into competing variants. Users' desire for seamless functionality tends eventually to push these variants toward interoperability, usually through "gateway" technologies that link incompatible systems into networks. Another stage is reached when these networks are linked to others, as in the cases of container transport (connecting trucking, rail, and shipping) or the Internet. End stages of infrastructure development include "splintering" (specialized service tiering) and decay, as newer infrastructures displace older ones. Temporal patterns are also visible in historical infrastructure development. This presentation, by a historian of science and technology, describes these patterns through examples of both physical and digital infrastructures, focusing on the global weather forecast infrastructure since the 19th century. It then investigates how some of these patterns might apply to the future of cyberinfrastructure for the Earth system sciences.

Civil mini-RPA's for the 1980's: Avionics design considerations. [remotely piloted vehicles

NASA Technical Reports Server (NTRS)

Karmarkar, J. S.

1975-01-01

A number of remote sensing or surveillance tasks (e.g., fire fighting, crop monitoring) in the civilian sector of our society may be performed in a cost effective manner by use of small remotely piloted aircraft (RPA). This study was conducted to determine equipment (and the associated technology) that is available, and that could be applied to the mini-RPA and to examine the potential applications of the mini-RPA with special emphasis on the wild fire surveillance mission. The operational considerations of using the mini-RPA as affected by government regulatory agencies were investigated. These led to equipment requirements (e.g., infra-red sensors) over and above those for the performance of the mission. A computer technology survey and forecast was performed. Key subsystems were identified, and a distributed microcomputer configuration, that was functionally modular, was recommended. Areas for further NASA research and development activity were also identified.

41 CFR 102-34.190 - What special requirements apply to exempted motor vehicles using District of Columbia or State...

Code of Federal Regulations, 2014 CFR

2014-01-01

... Registering Motor Vehicles Identification Exemptions § 102-34.190 What special requirements apply to exempted... and motor vehicle identification. The agency head must provide the name and signature of that official... requirements apply to exempted motor vehicles using District of Columbia or State license plates? 102-34.190...

41 CFR 102-34.190 - What special requirements apply to exempted motor vehicles using District of Columbia or State...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Registering Motor Vehicles Identification Exemptions § 102-34.190 What special requirements apply to exempted... and motor vehicle identification. The agency head must provide the name and signature of that official... requirements apply to exempted motor vehicles using District of Columbia or State license plates? 102-34.190...

41 CFR 102-34.190 - What special requirements apply to exempted motor vehicles using District of Columbia or State...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Registering Motor Vehicles Identification Exemptions § 102-34.190 What special requirements apply to exempted... and motor vehicle identification. The agency head must provide the name and signature of that official... requirements apply to exempted motor vehicles using District of Columbia or State license plates? 102-34.190...

41 CFR 102-34.190 - What special requirements apply to exempted motor vehicles using District of Columbia or State...

Code of Federal Regulations, 2012 CFR

2012-01-01

... Registering Motor Vehicles Identification Exemptions § 102-34.190 What special requirements apply to exempted... and motor vehicle identification. The agency head must provide the name and signature of that official... requirements apply to exempted motor vehicles using District of Columbia or State license plates? 102-34.190...

41 CFR 102-34.190 - What special requirements apply to exempted motor vehicles using District of Columbia or State...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Registering Motor Vehicles Identification Exemptions § 102-34.190 What special requirements apply to exempted... and motor vehicle identification. The agency head must provide the name and signature of that official... requirements apply to exempted motor vehicles using District of Columbia or State license plates? 102-34.190...

31 CFR 205.16 - What special rules apply to Federal assistance programs and projects funded by the Federal...

Code of Federal Regulations, 2012 CFR

2012-07-01

... assistance programs and projects funded by the Federal Highway Trust Fund? 205.16 Section 205.16 Money and... special rules apply to Federal assistance programs and projects funded by the Federal Highway Trust Fund? The following applies to Federal assistance programs and projects funded out of the Federal Highway...

31 CFR 205.16 - What special rules apply to Federal assistance programs and projects funded by the Federal...

Code of Federal Regulations, 2013 CFR

2013-07-01

... assistance programs and projects funded by the Federal Highway Trust Fund? 205.16 Section 205.16 Money and... special rules apply to Federal assistance programs and projects funded by the Federal Highway Trust Fund? The following applies to Federal assistance programs and projects funded out of the Federal Highway...

31 CFR 205.16 - What special rules apply to Federal assistance programs and projects funded by the Federal...

Code of Federal Regulations, 2014 CFR

2014-07-01

... assistance programs and projects funded by the Federal Highway Trust Fund? 205.16 Section 205.16 Money and... special rules apply to Federal assistance programs and projects funded by the Federal Highway Trust Fund? The following applies to Federal assistance programs and projects funded out of the Federal Highway...

31 CFR 205.16 - What special rules apply to Federal assistance programs and projects funded by the Federal...

Code of Federal Regulations, 2010 CFR

2010-07-01

... assistance programs and projects funded by the Federal Highway Trust Fund? 205.16 Section 205.16 Money and... special rules apply to Federal assistance programs and projects funded by the Federal Highway Trust Fund? The following applies to Federal assistance programs and projects funded out of the Federal Highway...

31 CFR 205.16 - What special rules apply to Federal assistance programs and projects funded by the Federal...

Code of Federal Regulations, 2011 CFR

2011-07-01

... assistance programs and projects funded by the Federal Highway Trust Fund? 205.16 Section 205.16 Money and... special rules apply to Federal assistance programs and projects funded by the Federal Highway Trust Fund? The following applies to Federal assistance programs and projects funded out of the Federal Highway...

Middle school special education teachers' perceptions and use of assistive technology in literacy instruction.

PubMed

Flanagan, Sara; Bouck, Emily C; Richardson, Jennifer

2013-01-01

In this research the authors examined middle school special education teachers' perceptions of assistive technology during literacy instruction with students with high incidence disabilities. A survey explored the use, effectiveness, and factors impacting use or effectiveness of assistive technology for literacy teaching and learning. Results suggested teachers' perceived assistive technology to be an effective tool for literacy, but use it minimally. When assistive technology was used, teachers indicated it was an effective literacy support. Teachers also reported barriers to using assistive technology in literacy including cost, usability, and lack of training/experience. However, factors such as previous successful experiences with assistive technology and assistive technology supporting students' learning encouraged assistive technology use. The consistency of teachers' reports of needing more experience and knowledge in assistive technology to fully use it suggests implications for preservice preparation such as providing additional experiences and information on assistive technology.

Using Contemporary Technology Tools to Improve the Effectiveness of Teacher Educators in Special Education

ERIC Educational Resources Information Center

O'Brien, Chris; Aguinaga, Nancy J.; Hines, Rebecca; Hartshorne, Richard

2011-01-01

Ongoing developments in educational technology, including web-based instruction, streaming video, podcasting, video-conferencing, and the use of wikis and blogs to create learning communities, have substantial impact on distance education and preparation of special educators in rural communities. These developments can be overwhelming, however,…

Technology and Special Needs Provision in the UK: Is Current Law Satisfactory?

ERIC Educational Resources Information Center

Kariyawasam, Rohan

2007-01-01

Recently, the government has issued legislation on disability discrimination (the UK "Disability Discrimination Act" 2005) that is silent on the issue of access to technology for those adults and minors with special needs/disabilities either in the classroom or out of the classroom. At the same time, commercial legislation from Europe…

Specialized Meaninglessness: A Source of Truth in the Technical Age.

ERIC Educational Resources Information Center

Thompson, Mark E.

This essay discusses how technical processes can deceive us and how college educators and social scientists must be especially sensitive to the dangers of technology when conducting research and proposing applications from research. As technology and bureaucratic controls have grown, so too have the demands for specialized knowledge in many areas.…

Infant Transport Monitoring

NASA Technical Reports Server (NTRS)

1978-01-01

The photo sequence illustrates the movement of an ill infant to a special care hospital by means of a new Pediatric Monitoring and Transport System, in which NASA technology and technical assistance are being applied to an urgent medical problem. Development of the system is a collaborative effort involving several organizations, principally, NASA Ames Research Center and Children's Hospital Medical Center, Oakland, California. Key to the system's efficacy is a custom-designed ambulance-to-hospital and hospital-to-hospital communications network, including two-way voice capability and space-derived biotelemetry; it allows a specialist at the destination hospital to monitor continuously the vital signs of the patient during transit.

On the control of the crystallographic texture in cladding tubes from Zr-based alloys for nuclear reactor

NASA Astrophysics Data System (ADS)

Isaenkova, M.; Perlovich, Yu.; Fesenko, V.

2016-10-01

This paper summarizes researches of authors, directed to the development of the methodological basis of X-ray studies as applied to zirconium alloys and on the systematization of new experimental results obtained using developed methods. The paper describes regularities of crystallographic texture formation in cladding tubes from zirconium alloys and their substructure inhomogeneity at various stages of manufacture, i.e. at hot and cold deformation, recrystallization, phase transformations and interaction of the above processes. The special attention is payed to possibilities of control the crystallographic texture of tubes at successive stages of their technological treatment.

Co-streaming classes: a follow-up study in improving the user experience to better reach users.

PubMed

Hayes, Barrie E; Handler, Lara J; Main, Lindsey R

2011-01-01

Co-streaming classes have enabled library staff to extend open classes to distance education students and other users. Student evaluations showed that the model could be improved. Two areas required attention: audio problems experienced by online participants and staff teaching methods. Staff tested equipment and adjusted software configuration to improve user experience. Staff training increased familiarity with specialized teaching techniques and troubleshooting procedures. Technology testing and staff training were completed, and best practices were developed and applied. Class evaluations indicate improvements in classroom experience. Future plans include expanding co-streaming to more classes and on-going data collection, evaluation, and improvement of classes.

Applying the system engineering approach to devise a master’s degree program in space technology in developing countries

NASA Astrophysics Data System (ADS)

Jazebizadeh, Hooman; Tabeshian, Maryam; Taheran Vernoosfaderani, Mahsa

2010-11-01

Although more than half a century is passed since space technology was first developed, developing countries are just beginning to enter the arena, focusing mainly on educating professionals. Space technology by itself is an interdisciplinary science, is costly, and developing at a fast pace. Moreover, a fruitful education system needs to remain dynamic if the quality of education is the main concern, making it a complicated system. This paper makes use of the System Engineering Approach and the experiences of developed countries in this area while incorporating the needs of the developing countries to devise a comprehensive program in space engineering at the Master's level. The needs of the developing countries as regards space technology education may broadly be put into two categories: to raise their knowledge of space technology which requires hard work and teamwork skills, and to transfer and domesticate space technology while minimizing the costs and maximizing its effectiveness. The requirements of such space education system, which include research facilities, courses, and student projects are then defined using a model drawn from the space education systems in universities in North America and Europe that has been modified to include the above-mentioned needs. Three design concepts have been considered and synthesized through functional analysis. The first one is Modular and Detail Study which helps students specialize in a particular area in space technology. Second is referred to as Integrated and Interdisciplinary Study which focuses on understanding and development of space systems. Finally, the third concept which has been chosen for the purpose of this study, is a combination of the other two, categorizing the required curriculum into seven modules, setting aside space applications. This helps students to not only specialize in one of these modules but also to get hands-on experience in a real space project through participation in summer group projects and also working in space systems laboratories or choose and write a thesis based on experiences gained through an internship program.

[Preface for genome editing special issue].

PubMed

Gu, Feng; Gao, Caixia

2017-10-25

Genome editing technology, as an innovative biotechnology, has been widely used for editing the genome from model organisms, animals, plants and microbes. CRISPR/Cas9-based genome editing technology shows its great value and potential in the dissection of functional genomics, improved breeding and genetic disease treatment. In the present special issue, the principle and application of genome editing techniques has been summarized. The advantages and disadvantages of the current genome editing technology and future prospects would also be highlighted.

Informatics Technology Mimics Ecology: Dense, Mutualistic Collaboration Networks Are Associated with Higher Publication Rates

PubMed Central

Sorani, Marco D.

2012-01-01

Information technology (IT) adoption enables biomedical research. Publications are an accepted measure of research output, and network models can describe the collaborative nature of publication. In particular, ecological networks can serve as analogies for publication and technology adoption. We constructed network models of adoption of bioinformatics programming languages and health IT (HIT) from the literature. We selected seven programming languages and four types of HIT. We performed PubMed searches to identify publications since 2001. We calculated summary statistics and analyzed spatiotemporal relationships. Then, we assessed ecological models of specialization, cooperativity, competition, evolution, biodiversity, and stability associated with publications. Adoption of HIT has been variable, while scripting languages have experienced rapid adoption. Hospital systems had the largest HIT research corpus, while Perl had the largest language corpus. Scripting languages represented the largest connected network components. The relationship between edges and nodes was linear, though Bioconductor had more edges than expected and Perl had fewer. Spatiotemporal relationships were weak. Most languages shared a bioinformatics specialization and appeared mutualistic or competitive. HIT specializations varied. Specialization was highest for Bioconductor and radiology systems. Specialization and cooperativity were positively correlated among languages but negatively correlated among HIT. Rates of language evolution were similar. Biodiversity among languages grew in the first half of the decade and stabilized, while diversity among HIT was variable but flat. Compared with publications in 2001, correlation with publications one year later was positive while correlation after ten years was weak and negative. Adoption of new technologies can be unpredictable. Spatiotemporal relationships facilitate adoption but are not sufficient. As with ecosystems, dense, mutualistic, specialized co-habitation is associated with faster growth. There are rapidly changing trends in external technological and macroeconomic influences. We propose that a better understanding of how technologies are adopted can facilitate their development. PMID:22279593

Applied Technology Proficiency of High School Students in Applied and Traditional Courses

ERIC Educational Resources Information Center

Field, Dennis W.

2003-01-01

This investigation compares applied technology skill levels of high school students enrolled in various applied and comparable traditional courses, particularly Principles of Technology and physics courses respectively. Outcomes from ACT's Applied Technology Work Keys[R] assessment test were used as a measure of applied technology skill levels.…

Digital Documentation and Archiving Low Cost: la Habana Vieja in Cuba

NASA Astrophysics Data System (ADS)

Morganti, C.; Bartolomei, C.

2017-11-01

This article deepens the subject of photo-modelling applied to architecture, on a medium and large scale and it shows all the possibilities to apply the last technologies of augmented reality and virtual reality to the historical and architectural contest of Havana City in Cuba. The context was quite unsuitable to our project because of different and complex reasons. The need to minimize the size of the tools, their weight and cost. Minimize the time of survey and photographic shot on site. To face the difficulties given by the continuing presence of a chaotic influx of people disturbing the work. Not least the difficulty of having a limited number of daily hours available to carry out photographic shots that requires special lighting conditions. This article describes the necessary steps to obtain a 3D dimensional textured model from reality through a photographic set.

Beginning the 21st century with advanced Automatic Parts Identification (API)

NASA Technical Reports Server (NTRS)

Schramm, Fred; Roxby, Don

1994-01-01

Under the direction of the NASA George C. Marshall Space Flight Center, Huntsville, Alabama, the development and commercialization of an advanced Automated Parts Indentification (API) system is being undertaken by Rockwell International Corporation. The new API system is based on a variable sized, machine-readable, two-dimensioanl matrix symbol that can be applied directly onto most metallic and nonmetallic materials using safe, permanent marking methods. Its checkerboard-like structure is the most space efficient of all symbologies. This high data-density symbology can be applied to products of different material sizes and geometries using application-dependent, computer-driven marking devices. The high fidelity markings produced by these devices can then be captured using a specially designed camera linked to any IBM-compatible computer. Applications of compressed symbology technology will reduce costs and improve quality, productivity, and processes in a wide variety of federal and commercial applications.

Frequency-dependent dielectric contribution of flexoelectricity allowing control of state switching in helicoidal liquid crystals

NASA Astrophysics Data System (ADS)

Outram, B. I.; Elston, S. J.

2013-07-01

The contribution of flexoelectric polarization to the dielectric susceptibility in helicoidal liquid crystals is formulated for the static equilibrium case, and further in the case of a time-varying field. A dispersion of the dielectric permittivity due to the frequency response of flexoelectric switching is described. The special case of a negative dielectric-anisotropy nematic material is considered and experimentally shown to agree with the analytical theory. It is further demonstrated how relaxation of the flexoelectric contribution to the dielectric tensor in this special case can be exploited to switch between states in cholesteric liquid crystal structures by altering the applied time-dependent field amplitude, if Δɛ<0 and (e1-e3)2/(K1+K3)>-Δɛɛ0. Consequentially, a versatile mechanism for driving between states in liquid crystal systems has been demonstrated and its implications for technology are suggested, and include dual-mode, bistable, and transflective displays.

Gigaflop architecture, a hardware perspective

NASA Technical Reports Server (NTRS)

Feierbach, G. F.

1978-01-01

Any super computer built in the early 1980s will use components that are available by fall 1978. The architecture of such a system cannot depart radically from current super computers if the software experience painfully acquired from these computers in the 70's is to apply. Given the above constraints, 10 billion floating point operations per second (BFLOPS) are attainable and a problem memory of 512 million (64 bit) words could be supported by the technology of the time. In contrast to this, industry is likely to respond with commercially available machines with a performance of less than 150 MFLOPS. This is due to self-imposed constraints on the manufacturers to provide upward compatible architectures (same instruction set) and systems which can be sold in significant volumes. Since this computing speed is inadequate to meet the demands of computational fluid dynamics, a special processor is required. Issues which are felt to be significant in the pursuit of maximum compute capability in this special processor are discussed.

Fidelity by design: Yoctoreactor and binder trap enrichment for small-molecule DNA-encoded libraries and drug discovery.

PubMed

Blakskjaer, Peter; Heitner, Tara; Hansen, Nils Jakob Vest

2015-06-01

DNA-encoded small-molecule library (DEL) technology allows vast drug-like small molecule libraries to be efficiently synthesized in a combinatorial fashion and screened in a single tube method for binding, with an assay readout empowered by advances in next generation sequencing technology. This approach has increasingly been applied as a viable technology for the identification of small-molecule modulators to protein targets and as precursors to drugs in the past decade. Several strategies for producing and for screening DELs have been devised by both academic and industrial institutions. This review highlights some of the most significant and recent strategies along with important results. A special focus on the production of high fidelity DEL technologies with the ability to eliminate screening noise and false positives is included: using a DNA junction called the Yoctoreactor, building blocks (BBs) are spatially confined at the center of the junction facilitating both the chemical reaction between BBs and encoding of the synthetic route. A screening method, known as binder trap enrichment, permits DELs to be screened robustly in a homogeneous manner delivering clean data sets and potent hits for even the most challenging targets. Copyright © 2015 Elsevier Ltd. All rights reserved.

Applications and Advances in Electronic-Nose Technologies

PubMed Central

Wilson, Alphus D.; Baietto, Manuela

2009-01-01

Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software innovations and progress in microcircuitry design and systems integration. The invention of many new e-nose sensor types and arrays, based on different detection principles and mechanisms, is closely correlated with the expansion of new applications. Electronic noses have provided a plethora of benefits to a variety of commercial industries, including the agricultural, biomedical, cosmetics, environmental, food, manufacturing, military, pharmaceutical, regulatory, and various scientific research fields. Advances have improved product attributes, uniformity, and consistency as a result of increases in quality control capabilities afforded by electronic-nose monitoring of all phases of industrial manufacturing processes. This paper is a review of the major electronic-nose technologies, developed since this specialized field was born and became prominent in the mid 1980s, and a summarization of some of the more important and useful applications that have been of greatest benefit to man. PMID:22346690

Big data - smart health strategies. Findings from the yearbook 2014 special theme.

PubMed

Koutkias, V; Thiessard, F

2014-08-15

To select best papers published in 2013 in the field of big data and smart health strategies, and summarize outstanding research efforts. A systematic search was performed using two major bibliographic databases for relevant journal papers. The references obtained were reviewed in a two-stage process, starting with a blinded review performed by the two section editors, and followed by a peer review process operated by external reviewers recognized as experts in the field. The complete review process selected four best papers, illustrating various aspects of the special theme, among them: (a) using large volumes of unstructured data and, specifically, clinical notes from Electronic Health Records (EHRs) for pharmacovigilance; (b) knowledge discovery via querying large volumes of complex (both structured and unstructured) biological data using big data technologies and relevant tools; (c) methodologies for applying cloud computing and big data technologies in the field of genomics, and (d) system architectures enabling high-performance access to and processing of large datasets extracted from EHRs. The potential of big data in biomedicine has been pinpointed in various viewpoint papers and editorials. The review of current scientific literature illustrated a variety of interesting methods and applications in the field, but still the promises exceed the current outcomes. As we are getting closer towards a solid foundation with respect to common understanding of relevant concepts and technical aspects, and the use of standardized technologies and tools, we can anticipate to reach the potential that big data offer for personalized medicine and smart health strategies in the near future.

Special Education Teacher Computer Literacy Training. Project STEEL. A Special Project To Develop and Implement a Computer-Based Special Teacher Education and Evaluation Laboratory. Volume II. Final Report.

ERIC Educational Resources Information Center

Frick, Theodore W.; And Others

The document is part of the final report on Project STEEL (Special Teacher Education and Evaluation Laboratory) intended to extend the utilization of technology in the training of preservice special education teachers. This volume focuses on the second of four project objectives, the development of a special education teacher computer literacy…

41 CFR 102-37.460 - What special terms and conditions apply to the donation of aircraft and vessels?

Code of Federal Regulations, 2010 CFR

2010-07-01

... conditions apply to the donation of aircraft and vessels? 102-37.460 Section 102-37.460 Public Contracts and... REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY Donations to Public Agencies, Service...-37.460 What special terms and conditions apply to the donation of aircraft and vessels? The following...

Magnetic Levitation Coupled with Portable Imaging and Analysis for Disease Diagnostics.

PubMed

Knowlton, Stephanie M; Yenilmez, Bekir; Amin, Reza; Tasoglu, Savas

2017-02-19

Currently, many clinical diagnostic procedures are complex, costly, inefficient, and inaccessible to a large population in the world. The requirements for specialized equipment and trained personnel require that many diagnostic tests be performed at remote, centralized clinical laboratories. Magnetic levitation is a simple yet powerful technique and can be applied to levitate cells, which are suspended in a paramagnetic solution and placed in a magnetic field, at a position determined by equilibrium between a magnetic force and a buoyancy force. Here, we present a versatile platform technology designed for point-of-care diagnostics which uses magnetic levitation coupled to microscopic imaging and automated analysis to determine the density distribution of a patient's cells as a useful diagnostic indicator. We present two platforms operating on this principle: (i) a smartphone-compatible version of the technology, where the built-in smartphone camera is used to image cells in the magnetic field and a smartphone application processes the images and to measures the density distribution of the cells and (ii) a self-contained version where a camera board is used to capture images and an embedded processing unit with attached thin-film-transistor (TFT) screen measures and displays the results. Demonstrated applications include: (i) measuring the altered distribution of a cell population with a disease phenotype compared to a healthy phenotype, which is applied to sickle cell disease diagnosis, and (ii) separation of different cell types based on their characteristic densities, which is applied to separate white blood cells from red blood cells for white blood cell cytometry. These applications, as well as future extensions of the essential density-based measurements enabled by this portable, user-friendly platform technology, will significantly enhance disease diagnostic capabilities at the point of care.

Computer Technology/Special Education/Rehabilitation: Proceedings of the Conference (2nd, Northridge, California, October 16-18, 1986).

ERIC Educational Resources Information Center

Murphy, Harry J., Ed.

The following 25 papers (with their authors) are presented from a conference on computer technology in special education and rehabilitation: "Computers for Business--Computers for Life" (I. Keith Austin); "Rehabilitation and the Computer: How to Find What You Need" (Thomas Backer); "Computer Access Alternatives for Visually Impaired People in…

Industrial Technology Education Teachers' Knowledge, Experience, and Feelings Related To Working with Special Population Students in the Lincoln, Nebraska Public Schools.

ERIC Educational Resources Information Center

Howell, Robert T.

2000-01-01

Survey responses from 20 of 39 industrial technology education teachers in Lincoln, Nebraska, indicated that they felt able to teach special needs students but desired more training. They did not receive adequate support for working with these students and preferred professional days for inservice training. (SK)

Technology-Mediated Instruction in Distance Education and Teacher Preparation in Special Education

ERIC Educational Resources Information Center

Bullock, Lyndal M.; Gable, Robert A.; Mohr, J. Darrell

2008-01-01

In this article, the authors examine the literature on distance education and offer a brief chronology of its past-to-present development, with special attention to the evolution of technology-mediated instruction. They document some of the major trends related to both theoretical and practical aspects of distance education. In particular, they…

Overview of Assistive Technology Possibilities for Teachers to Enhance Academic Outcomes of All Students

ERIC Educational Resources Information Center

Akpan, Joseph P.; Beard, Lawrence A.

2013-01-01

Despite enormous improvements in AT devices and services in American classrooms, the number of students with special needs, and the complexity of needs that they and their families experience continues to be sky rocketed nationwide. In response to these urgent needs, more advanced and specialized assistive technologies have been developed that…

Subject Specialization and Science Teachers' Perception of Information and Communication Technology for Instruction in Kwara State

ERIC Educational Resources Information Center

Fakomogbon, Michael Ayodele; Adebayo, Rachael Funmi; Adegbija, Mosiforeba Victoria; Shittu, Ahmed Tajudeen; Oyelekan, Oloyede Solomon

2014-01-01

This study examined Kwara State secondary school science teachers' perception of [information and communications technology] ICT for instruction based on their area of specialization. Participants were 630 science teachers of Biology, Chemistry, Physics and Mathematics from both public and private senior secondary schools in 12 Local Government…

Teaching Mathematical Problem Solving to Middle School Students in Math, Technology Education, and Special Education Classrooms

ERIC Educational Resources Information Center

Bottge, Brian A.; Heinrichs, Mary; Mehta, Zara Dee; Rueda, Enrique; Hung, Ya-Hui; Danneker, Jeanne

2004-01-01

This study compared two approaches for teaching sixth-grade middle school students to solve math problems in math, technology education, and special education classrooms. A total of 17 students with disabilities and 76 students without disabilities were taught using either enhanced anchored instruction (EAI) or text-based instruction coupled with…

Communication Opportunities via Special Messaging Technology for Two Post-Coma Persons with Multiple Disabilities

ERIC Educational Resources Information Center

Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Colonna, Fabio; Navarro, Jorge; Lanzilotti, Crocifissa; de Pace, Claudia; Megna, Marisa; Oliva, Doretta

2011-01-01

This study extended the assessment of a special messaging technology with two additional post-coma adults who had emerged from a minimally conscious state, but showed multiple disabilities including profound motor and communication impairments. For each participant, the study involved an ABAB design, in which the A represented baseline phases and…

Examining the Nature of Critical Incidents during Interactions between Special Education Teachers and Virtual Coaches

ERIC Educational Resources Information Center

Snyder, Kathleen

2013-01-01

Coaching is a powerful tool for improving special education teachers' use of evidence-based practices. Recent technological advances have great potential to influence the manner in which coaching is implemented. Virtual coaching is an innovative cycle of coaching that utilizes video-conferencing and bug-in-ear technology in internet-mediated…

Urban and Rural Preservice Special Education Teachers' Computer Use and Perceptions of Self-Efficacy

ERIC Educational Resources Information Center

Almeida, Conceicao M.; Jameson, J. Matt; Riesen, Tim; McDonnell, John

2016-01-01

Despite the rapid and ongoing increase in the use and availability of computers and technology in and outside of public school classrooms, there is relatively little literature that has examined preservice special education teachers' perceptions of their own computer use and self-efficacy with new technologies or how these perceptions may impact…

48 CFR 39.104 - Information technology services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

48 CFR 39.104 - Information technology services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

48 CFR 39.104 - Information technology services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

48 CFR 39.104 - Information technology services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

48 CFR 39.104 - Information technology services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

[Science in Argentina. Where do we go from here?].

PubMed

Barañao, Lino

2012-01-01

The Minister of Science described in detail his plans for the creation of closer bonds between science and society in a long term attempt to improve general quality of life. This will be accomplished by strengthening the infrastructure with diversification of the finances, multidisciplinary interrelations aiming to increase production, with special attention for social demands. One of these objectives includes the creation of research-private/public company interrelations, stressing the importance of multidisciplinary projects. Publication of results in high impact journals will always be a priority stressing the importance of basic research as a source of breakthroughs or technological inventions. The Minister also referred to the awarding of grants for scientific projects, the relation between research and production and the promotion of technological innovations. He defined three technological platforms, which are nanotechnology, biotechnology and communication. He also identified four problem/opportunity sectors, such as public health, energy sources, agro-industry and social development. Interaction between these has already led to an area of biotechnology applied to public health which will grow through translational medicine. He finally discussed the problem of patents and their importance in promoting successful business-research partnerships.

Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

PubMed Central

Ritzberger, Christian; Apel, Elke; Höland, Wolfram; Peschke, Arnd; Rheinberger, Volker M.

2010-01-01

The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.

Assessment of Thermal Control and Protective Coatings

NASA Technical Reports Server (NTRS)

Mell, Richard J.

2000-01-01

This final report is concerned with the tasks performed during the contract period which included spacecraft coating development, testing, and applications. Five marker coatings consisting of a bright yellow handrail coating, protective overcoat for ceramic coatings, and specialized primers for composites (or polymer) surfaces were developed and commercialized by AZ Technology during this program. Most of the coatings have passed space environmental stability requirements via ground tests and/or flight verification. Marker coatings and protective overcoats were successfully flown on the Passive Optical Sample Assembly (POSA) and the Optical Properties Monitor (OPM) experiments flown on the Russian space station MIR. To date, most of the coatings developed and/or modified during this program have been utilized on the International Space Station and other spacecraft. For ISS, AZ Technology manufactured the 'UNITY' emblem now being flown on the NASA UNITY node (Node 1) that is docked to the Russian Zarya (FGB) utilizing the colored marker coatings (white, blue, red) developed by AZ Technology. The UNITY emblem included the US American flag, the Unity logo, and NASA logo on a white background, applied to a Beta cloth substrate.

Nanoscale tailor-made membranes for precise and rapid molecular sieve separation.

PubMed

Wang, Jing; Zhu, Junyong; Zhang, Yatao; Liu, Jindun; Van der Bruggen, Bart

2017-03-02

The precise and rapid separation of different molecules from aqueous, organic solutions and gas mixtures is critical to many technologies in the context of resource-saving and sustainable development. The strength of membrane-based technologies is well recognized and they are extensively applied as cost-effective, highly efficient separation techniques. Currently, empirical-based approaches, lacking an accurate nanoscale control, are used to prepare the most advanced membranes. In contrast, nanoscale control renders the membrane molecular specificity (sub-2 nm) necessary for efficient and rapid molecular separation. Therefore, as a growing trend in membrane technology, the field of nanoscale tailor-made membranes is highlighted in this review. An in-depth analysis of the latest advances in tailor-made membranes for precise and rapid molecule sieving is given, along with an outlook to future perspectives of such membranes. Special attention is paid to the established processing strategies, as well as the application of molecular dynamics (MD) simulation in nanoporous membrane design. This review will provide useful guidelines for future research in the development of nanoscale tailor-made membranes with a precise and rapid molecular sieve separation property.

Students with Specialized Health Care Needs. ERIC Digest #458.

ERIC Educational Resources Information Center

Sirvis, Barbara

Students with specialized health care needs require specialized technological health care procedures for life support and/or health support during the school day. They may or may not require special education. These children were previously unserved in educational settings. Estimation of their numbers is difficult, but as many as 100,000 infants…

Tourniquet Effectiveness When Placed Over the Joint Service Lightweight Integrated Suit Technology.

PubMed

Peponis, Thomas; Ramly, Elie; Roth, Kym A; King, David R

2016-01-01

Chemical, biological, radiological, and nuclear threats (CBRNs) are uncommon; however, Special Operations Forces (SOF) are likely at the highest risk for tactical exposure. In the event of exposure, SOF will rely on the Joint Service Lightweight Integrated Suit Technology (JSLIST) for survival. Doctrine dictates that a tourniquet should be applied over the JSLIST after a severe limb injury with hemorrhage. There is no evidence in the literature that the Combat Application Tourniquet (C-A-T), which is currently the most widely available tourniquet on the battlefield, can effectively occlude arterial blood flow when applied over the JSLIST. We hypothesized that C-A-T application over the JSLIST would be ineffective at occluding arterial blood flow in the lower extremity. Following institutional review board approval, 20 healthy volunteers were recruited to participate. All volunteers wore the G3 Combat Pant and they donned the JSLIST. First, an operating room pneumatic tourniquet (gold standard) was applied in the proximal thigh and inflated to 300mmHg. Distal arterial interrogation was performed by examination of distal pulses and noninvasive arterial plethysmography wave-form analysis. After a 1-hour recovery period, the C-A-T was applied and tightened. A double routing technique was used, with three 180° turns of the windlass. The same distal interrogation followed. Half of the volunteers had the pneumatic tourniquet applied first, and the other half had the C-A-T applied first. All volunteers had palpable pulses at baseline despite a wide range in volunteer body mass index. Distal pulses were absent in all volunteers following inflation of the pneumatic tourniquet as well as tightening of the C-A-T. The observed difference between the mean amplitude of plethysmographic waveforms was not different. The C-A-T effectively occludes arterial flow in the lower extremity, even when applied over the JSLIST. This finding supports existing military doctrine for tourniquet application over the JSLIST in the nonpermissive CBRN environment to control extremity exsanguination. 2016.

EDITORIAL: Changes to the journal Changes to the journal

NASA Astrophysics Data System (ADS)

Zheludev, Nikolay I.

2010-01-01

It is a privilege to be Editor-in-Chief of Journal of Optics at this exciting time when the use of light spearheads the development of new technologies in telecommunications, green energy, manufacturing, medicine and defence, just to mention a few. These technological advances, seen by many as the next photonic technological revolution, are underpinned by fundamental and applied research in the following key directions: Nanophotonics and plasmonics Metamaterials and structured photonic materials Nonlinear and ultrafast optics Photonics at the life science interface Information and communication optics Integrated optics systems and devices Material processing with light Propagation, diffraction and scattering This is where Journal of Optics focuses its attention. This editorial marks the first issue of the journal published under the abbreviated name (shortened from Journal of Optics A: Pure and Applied Optics). The name change is just one of a series of changes introduced in the last year, along with the 8 subject sections listed above and the appointment of Section Editors. With the name change, we will also update the look of the journal by introducing colour cover images which will feature some of the most exciting research in the journal. We have retained many of the journal's original selling points: we are found in thousands of libraries around the world, and will continue our policy of free web access to all papers for 30 days after publication, ensuring broad and unrestricted dissemination of your research results. We will also continue our strong and well respected special issue and topical review programmes and we are always grateful to receive new suggestions for special issues or review articles. Along with the Editorial Board, I would like to thank the authors, referees and readers who have contributed to the success of Journal of Optics. The increasing quality and visibility of the journal, as demonstrated by the dramatic increase in its impact factor in recent years, make it a prime destination for research papers across the field of optics. So, if you're not already part of our community, we hope you'll join us soon by submitting your next research paper to Journal of Optics.

Laser spectroscopy: Assessment of research needs for laser technologies applied to advanced spectroscopic methods

NASA Astrophysics Data System (ADS)

Hurst, G. S.

1990-05-01

This report is organized as follows. Section 2 summarizes the current program of DOE's Office of Health and Environmental Research (OHER) and provides some remarks on how laser science and technology could beneficially impact most of the research programs. Section 3 provides a brief global perspective on laser technology and attempts to define important trends in the field. Similarly, Section 4 provides a global perspective on laser spectroscopy and addresses important trends. Thus, Section 5 focuses on the trends in laser technology and spectroscopy which could impact the OHER mission in significant ways and contains the basis for recommendations made in the executive summary. For those with limited familiarity with laser technology and laser spectroscopy, reference is made to Appendix 1 for a list of abbreviations and acronyms. Appendix 2 can serve a useful review or tutorial for those who are not deeply involved with laser spectroscopy. Even those familiar with laser spectroscopy and laser technology may find it useful to know precisely what the authors of this document mean by certain specialized terms and expressions. Finally, a note on the style of referencing may be appropriate. Whenever possible a book or review articles is referenced as the preferred citation. However, we frequently found it useful to reference a number of individual papers of recent origin or those which were not conveniently found in the review articles.

[A new information technology for system diagnosis of functional activity of human organs].

PubMed

Avshalumov, A Sh; Sudakov, K V; Filaretov, G F

2006-01-01

The goal of this work was to consider a new diagnostic technology based on analysis of objective information parameters of functional activity and interaction of normal and pathologically changed human organs. The technology is based on the use of very low power millimeter (EHF) radiation emitted by human body and other biological objects in the process of vital activity. The importance of consideration of the information aspect of vital activity from the standpoint of the theory of functional systems suggested by P. K. Anokhin is emphasized. The suggested information technology is theoretically substantiated. The capabilities of the suggested technology for diagnosis, as well as the difficulties of its practical implementation caused by very low power of electromagnetic fields generated by human body, are discussed. It is noted that only use of modern radiophysical equipment together with new software based on specially developed algorithms made it possible to construct a medical EHF diagnostic system for effective implementation of the suggested technology. The system structure, functions of its components, the examination procedure, and the form of representation of diagnostic information are described together with the specific features of applied software based on the principle of maximal objectivity of analysis and interpretation of the results of diagnosis on the basis of artificial intelligence algorithms. The diagnostic capabilities of the system are illustrated by several examples.

41 CFR 102-37.460 - What special terms and conditions apply to the donation of aircraft and vessels?

Code of Federal Regulations, 2012 CFR

2012-01-01

... registration of an aircraft intended for flight use within 30 calendar days of receipt of the aircraft. The... conditions apply to the donation of aircraft and vessels? 102-37.460 Section 102-37.460 Public Contracts and...-37.460 What special terms and conditions apply to the donation of aircraft and vessels? The following...

41 CFR 102-37.460 - What special terms and conditions apply to the donation of aircraft and vessels?

Code of Federal Regulations, 2014 CFR

2014-01-01

... registration of an aircraft intended for flight use within 30 calendar days of receipt of the aircraft. The... conditions apply to the donation of aircraft and vessels? 102-37.460 Section 102-37.460 Public Contracts and...-37.460 What special terms and conditions apply to the donation of aircraft and vessels? The following...

41 CFR 102-37.460 - What special terms and conditions apply to the donation of aircraft and vessels?

Code of Federal Regulations, 2013 CFR

2013-07-01

... registration of an aircraft intended for flight use within 30 calendar days of receipt of the aircraft. The... conditions apply to the donation of aircraft and vessels? 102-37.460 Section 102-37.460 Public Contracts and...-37.460 What special terms and conditions apply to the donation of aircraft and vessels? The following...

41 CFR 102-37.460 - What special terms and conditions apply to the donation of aircraft and vessels?

Code of Federal Regulations, 2011 CFR

2011-01-01

... registration of an aircraft intended for flight use within 30 calendar days of receipt of the aircraft. The... conditions apply to the donation of aircraft and vessels? 102-37.460 Section 102-37.460 Public Contracts and...-37.460 What special terms and conditions apply to the donation of aircraft and vessels? The following...

SPINOFF 2000

NASA Technical Reports Server (NTRS)

2000-01-01

For the past 42 years, NASA has made special efforts to ensure the widest possible dissemination of its research and technology developments. We share the wealth of technology developed for our missions with the nation's industries to contribute to US economic strength and quality of life. For the past 27 years, this publication has provided you with over 1,200 examples of products and services developed as a direct result of commercial partnerships between NASA and the business community. Examples have covered products from fire retardant materials and air pollution monitors to non-invasive cardiac monitors and sensors for environmental control. In the Technology Transfer and Outreach section of Spinoff 2000, we highlight the activities of our Ames Research Center's Commercial Technology Office (CTO). Their efforts to facilitate and support technology commercialization are representative of the CTO at each field center. Increased activities to accelerate the dissemination of technologies, speed up the process of patent licensing, quicken the release of software for beta testing, support and manage incubators, and hasten the collaboration with commercial and academic organizations will continue to maximize the earliest potential commercial utilization of NASA's new inventions and technologies. Spinoff 2000 is organized into three sections: (1) Aerospace and Development highlights major research and development efforts currently carried out at the 10 NASA field centers; (2) Commercial Benefits-Spinoffs describes commercially available products and services resulting from the transfer of NASA technology; and (3) Technology Transfer and Outreach features this year's center spotlight, NASA's Ames Research Center, and its commercialization efforts, as well as the mechanisms in place nationwide to assist US industry in obtaining, transferring, and applying NASA technology, expertise, and assistance.

EDITORIAL: ECRH physics and technology in ITER

NASA Astrophysics Data System (ADS)

Luce, T. C.

2008-05-01

It is a great pleasure to introduce you to this special issue containing papers from the 4th IAEA Technical Meeting on ECRH Physics and Technology in ITER, which was held 6-8 June 2007 at the IAEA Headquarters in Vienna, Austria. The meeting was attended by more than 40 ECRH experts representing 13 countries and the IAEA. Presentations given at the meeting were placed into five separate categories EC wave physics: current understanding and extrapolation to ITER Application of EC waves to confinement and stability studies, including active control techniques for ITER Transmission systems/launchers: state of the art and ITER relevant techniques Gyrotron development towards ITER needs System integration and optimisation for ITER. It is notable that the participants took seriously the focal point of ITER, rather than simply contributing presentations on general EC physics and technology. The application of EC waves to ITER presents new challenges not faced in the current generation of experiments from both the physics and technology viewpoints. High electron temperatures and the nuclear environment have a significant impact on the application of EC waves. The needs of ITER have also strongly motivated source and launcher development. Finally, the demonstrated ability for precision control of instabilities or non-inductive current drive in addition to bulk heating to fusion burn has secured a key role for EC wave systems in ITER. All of the participants were encouraged to submit their contributions to this special issue, subject to the normal publication and technical merit standards of Nuclear Fusion. Almost half of the participants chose to do so; many of the others had been published in other publications and therefore could not be included in this special issue. The papers included here are a representative sample of the meeting. The International Advisory Committee also asked the three summary speakers from the meeting to supply brief written summaries (O. Sauter: EC wave physics and applications, M. Thumm: Source and transmission line development, and S. Cirant: ITER specific system designs). These summaries are included in this issue to give a more complete view of the technical meeting. Finally, it is appropriate to mention the future of this meeting series. With the ratification of the ITER agreement and the formation of the ITER International Organization, it was recognized that meetings conducted by outside agencies with an exclusive focus on ITER would be somewhat unusual. However, the participants at this meeting felt that the gathering of international experts with diverse specialities within EC wave physics and technology to focus on using EC waves in future fusion devices like ITER was extremely valuable. It was therefore recommended that this series of meetings continue, but with the broader focus on the application of EC waves to steady-state and burning plasma experiments including demonstration power plants. As the papers in this special issue show, the EC community is already taking seriously the challenges of applying EC waves to fusion devices with high neutron fluence and continuous operation at high reliability.

34 CFR 380.8 - What regulations apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What regulations apply? 380.8 Section 380.8 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED...

34 CFR 380.9 - What definitions apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What definitions apply? 380.9 Section 380.9 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED...

EDITORIAL: Selected papers from Photon08 Selected papers from Photon08

NASA Astrophysics Data System (ADS)

Boardman, Allan D.; Harvey, Andrew; Jones, Julian C.

2009-05-01

Photon08 was the fifth in a biennial series of events that began in 2000 and has grown to become the largest optics research meeting in the UK. Two of the co-located constituent conferences of Photon08 were generated by the Institute of Physics. These were the Optics and Photonics Division conference plus QEP-18 organised by the Quantum Electronics and Photonics Group. In addition, Photon08 contained a major exhibition and an Industry Technology Programme. Photon08 was organised by the UK Consortium for Photonics and Optics (UKCPO), whose members comprise all organisations that represent the UK optics community, whether learned societies, professional institutions, trade associations, or regional special interest groups. In hosting the Photon series, it is the objective of the UKCPO to provide a single forum for UK optics. Photon08 was held at Heriot-Watt University, Edinburgh, 26-29 August 2008, and was attended by around 500 people. The international representation was very impressive and the range of topics was mapped onto a wide audience, which embraced every aspect of photonics from quantum information processing to biomedical imaging and technology transfer into the commercial domain. The purpose of this special issue is to present a characteristic selection of the research reported at Photon08. On behalf of the conference, we are very grateful to the editors of Journal of Optics A: Pure and Applied Optics for the opportunity to provide this archival record. The majority of the papers in this special issue follow the theme of measurement and instrumentation. This reflects one of the traditional strengths of the UK community that spans the interests of the Optical Group, the Optics and Photonics Division and the Instrument Science and Technology Group of the Institute of Physics, and the Fringe Analysis Special Interest Group. The other papers illustrate other UK strengths in quantum processing and nonlinear optics. There can be few areas of physics so diverse in application, and of such immediate value in the wider world, as photonics and this is evident from the content of this issue. It is a fascinating example of what Photon08 had to offer. As well as its intrinsic interest, we hope that it will inspire readers to attend Photon10, which will be held in Southampton at the end of August 2010.

Towards Building a Computer Aided Education System for Special Students Using Wearable Sensor Technologies

PubMed Central

Mehmood, Raja Majid; Lee, Hyo Jong

2017-01-01

Human computer interaction is a growing field in terms of helping people in their daily life to improve their living. Especially, people with some disability may need an interface which is more appropriate and compatible with their needs. Our research is focused on similar kinds of problems, such as students with some mental disorder or mood disruption problems. To improve their learning process, an intelligent emotion recognition system is essential which has an ability to recognize the current emotional state of the brain. Nowadays, in special schools, instructors are commonly use some conventional methods for managing special students for educational purposes. In this paper, we proposed a novel computer aided method for instructors at special schools where they can teach special students with the support of our system using wearable technologies. PMID:28208734

Workforce 2000 and the Mildly Handicapped. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Woodward, John

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper explores the changing nature of the workforce in relation to concurrent changes in education services for students with mild disabilities. Current trends are identified and projections for the next decade are offered, which include the…

Integrate Web 2.0 Technology to Facilitate Online Professional Community: EMI Special Editing Experiences

ERIC Educational Resources Information Center

Tu, Chih-Hsiung; Blocher, Michael; Ntoruru, Joshua

2008-01-01

This article reports on the collaborative journal review of an online professional community that was established to prepare this special edition for publication. The focus is on how Web 2.0 technology can be used to support a professional journal review community and to enhance active social interaction among reviewers. The theme of this special…

Advanced textile materials and biopolymers in wound management.

PubMed

Petrulyte, Salvinija

2008-02-01

New generation medical textiles are an important growing field with great expansion in wound management products. Virtually new products are coming but also well known materials with significantly improved properties using advanced technologies and new methods are in the centre of research which are highly technical, technological, functional, and effective oriented. The key qualities of fibres and dressings as wound care products include that they are bacteriostatic, anti-viral, fungistatic, non-toxic, high absorbent, non-allergic, breathable, haemostatic, biocompatible, and manipulatable to incorporate medications, also provide reasonable mechanical properties. Many advantages over traditional materials have products modified or blended with also based on alginate, chitin/chitosan, collagen, branan ferulate, carbon fibres. Textile structures used for modern wound dressings are of large variety: sliver, yarn, woven, non-woven, knitted, crochet, braided, embroidered, composite materials. Wound care also applies to materials like hydrogels, matrix (tissue engineering), films, hydrocolloids, foams. Specialized additives with special functions can be introduced in advanced wound dressings with the aim to absorb odours, provide strong antibacterial properties, smooth pain and relieve irritation. Because of unique properties as high surface area to volume ratio, film thinness, nano scale fibre diameter, porosity, light weight, nanofibres are used in wound care. The aim of this study is to outline and review the latest developments and advance in medical textiles and biopolymers for wound management providing the overview with generalized scope about novelties in products and properties.

Technology in TESOL.

ERIC Educational Resources Information Center

TESOL Journal, 1993

1993-01-01

This special issue is devoted to the theme of advancing technology in the teaching of English to speakers of other languages (TESOL). Articles include: "Technology in TESOL" (Richard Orem, Cynthia Holliday); TESOL Technology: Imposition or Opportunity?" (Simon Murison-Bowie); "A Review of Advanced Technologies for L2…

76 FR 16292 - Medical Devices; Immunology and Microbiology Devices; Classification of Ovarian Adnexal Mass...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... test system into class II (special controls). The special control that will apply to these devices is the guidance document entitled ``Guidance for Industry and FDA Staff; Class II Special Controls... devices into class II (special controls) because special controls, in addition to general controls, will...

76 FR 6551 - Medical Devices; General and Plastic Surgery Devices; Classification of Contact Cooling System...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-07

... intended for non-invasive aesthetic use will need to address the issues covered in the special controls... intended for non-invasive aesthetic use. (b) Classification. Class II (special controls). The special... into class II (special controls). The special control that will apply to the device is the guidance...

40 CFR 1045.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false What special provisions apply to branded engines? 1045.640 Section 1045.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND...

40 CFR 1045.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What special provisions apply to branded engines? 1045.640 Section 1045.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND...

40 CFR 1045.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false What special provisions apply to branded engines? 1045.640 Section 1045.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND...

40 CFR 1045.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false What special provisions apply to branded engines? 1045.640 Section 1045.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND...

34 CFR 373.3 - What regulations apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What regulations apply? 373.3 Section 373.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL DEMONSTRATION PROGRAMS General § 373.3 What regulations...

34 CFR 373.3 - What regulations apply?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false What regulations apply? 373.3 Section 373.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL DEMONSTRATION PROGRAMS General § 373.3 What regulations...

34 CFR 373.3 - What regulations apply?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true What regulations apply? 373.3 Section 373.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL DEMONSTRATION PROGRAMS General § 373.3 What regulations...

34 CFR 373.3 - What regulations apply?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false What regulations apply? 373.3 Section 373.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL DEMONSTRATION PROGRAMS General § 373.3 What regulations...

Applying User Input to the Design and Testing of an Electronic Behavioral Health Information System for Wraparound Care Coordination

PubMed Central

Bruns, Eric J.; Hyde, Kelly L.; Sather, April; Hook, Alyssa; Lyon, Aaron R.

2015-01-01

Health information technology (HIT) and care coordination for individuals with complex needs are high priorities for quality improvement in health care. However, there is little empirical guidance about how best to design electronic health record systems and related technologies to facilitate implementation of care coordination models in behavioral health, or how best to apply user input to the design and testing process. In this paper, we describe an iterative development process that incorporated user/stakeholder perspectives at multiple points and resulted in an electronic behavioral health information system (EBHIS) specific to the wraparound care coordination model for youth with serious emotional and behavioral disorders. First, we review foundational HIT research on how EBHIS can enhance efficiency and outcomes of wraparound that was used to inform development. After describing the rationale for and functions of a prototype EBHIS for wraparound, we describe methods and results for a series of six small studies that informed system development across four phases of effort – predevelopment, development, initial user testing, and commercialization – and discuss how these results informed system design and refinement. Finally, we present next steps, challenges to dissemination, and guidance for others aiming to develop specialized behavioral health HIT. The research team's experiences reinforce the opportunity presented by EBHIS to improve care coordination for populations with complex needs, while also pointing to a litany of barriers and challenges to be overcome to implement such technologies. PMID:26060099

Special Libraries Division. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

In "How Special Libraries Use Networks," a paper presented at the 1982 International Federation of Library Associations (IFLA) conference, David R. Bender (United States) advocates cooperation among academic, public, school, and special libraries in the areas of information management, staff services, and acquisition of technology. He…

A study on specialist or special disease clinics based on big data.

PubMed

Fang, Zhuyuan; Fan, Xiaowei; Chen, Gong

2014-09-01

Correlation analysis and processing of massive medical information can be implemented through big data technology to find the relevance of different factors in the life cycle of a disease and to provide the basis for scientific research and clinical practice. This paper explores the concept of constructing a big medical data platform and introduces the clinical model construction. Medical data can be collected and consolidated by distributed computing technology. Through analysis technology, such as artificial neural network and grey model, a medical model can be built. Big data analysis, such as Hadoop, can be used to construct early prediction and intervention models as well as clinical decision-making model for specialist and special disease clinics. It establishes a new model for common clinical research for specialist and special disease clinics.

Using Technology to Address Barriers in Rural Special Education for Students with Autism: A Do-It-Yourself Guide

ERIC Educational Resources Information Center

McKissick, Bethany R.; Diegelmann, Karen M.; Parker, Sarah

2017-01-01

Providing high-quality special education services in rural settings has a variety of challenges such as geographic isolation and a lack of resources. One particularly challenging aspect of rural special education is providing general curriculum access. Computer-assisted instruction is one way to provide high-quality specialized instruction that…

[The impact of technology in Pathological Anatomy and the contribution of this speciality to technological development].

PubMed

Puras-Gil, A M; López-Cousillas, A

1999-01-01

It is obvious that technology has contributed throughout history to the development of the different sciences. In this article, we define the concept of Pathology as a medical speciality, and we explain its influence in a hospital, considering very different fields such as education, research, quality control, hospital information, and patient care. This speciality has undergone a considerable evolution, to which technological innovation has undoubtedly contributed. As a basic discipline, it is of great importance in pre and post-graduate training, in the medical education at the hospital or outside it, and in the fields previously mentioned. Its relation with other disciplines such us Chemistry, (fixation and dyeing), Physics (mechanical devices), Mathematics (algorithms, morphometry, statistics...) and Telecommunications (telepathology, image analysis...) is examined and their contribution to Pathology is evaluated. We are also aware of contributions made by Pathology to technological innovation in the evaluation of different diagnostic methods or in the recent therapeutic technologies based on Radiotherapy, Hyperthermia, laser, prothesis, etc.; where histological examination provides accurate information about the therapeutic capacity or side-effects, or the rejection reactions caused, aiding the research to obtain adequate results.

Micro Dot Patterning on the Light Guide Panel Using Powder Blasting.

PubMed

Jang, Ho Su; Cho, Myeong Woo; Park, Dong Sam

2008-02-08

This study is to develop a micromachining technology for a light guidepanel(LGP) mold, whereby micro dot patterns are formed on a LGP surface by a singleinjection process instead of existing screen printing processes. The micro powder blastingtechnique is applied to form micro dot patterns on the LGP mold surface. The optimalconditions for masking, laminating, exposure, and developing processes to form the microdot patterns are first experimentally investigated. A LGP mold with masked micro patternsis then machined using the micro powder blasting method and the machinability of themicro dot patterns is verified. A prototype LGP is test- injected using the developed LGPmold and a shape analysis of the patterns and performance testing of the injected LGP arecarried out. As an additional approach, matte finishing, a special surface treatment method,is applied to the mold surface to improve the light diffusion characteristics, uniformity andbrightness of the LGP. The results of this study show that the applied powder blastingmethod can be successfully used to manufacture LGPs with micro patterns by just singleinjection using the developed mold and thereby replace existing screen printing methods.

14 CFR Special Federal Aviation... - Alternative Communications and Dispatching Procedures

Code of Federal Regulations, 2010 CFR

2010-01-01

... Procedures Federal Special Federal Aviation Regulation 80 Aeronautics and Space FEDERAL AVIATION... No. 80 Special Federal Aviation Regulation 80—Alternative Communications and Dispatching Procedures 1. Applicability. This Special Federal Aviation Regulation applies to each holder of an air carrier or operating...

14 CFR Special Federal Aviation... - Alternative Communications and Dispatching Procedures

Code of Federal Regulations, 2011 CFR

2011-01-01

... Procedures Federal Special Federal Aviation Regulation 80 Aeronautics and Space FEDERAL AVIATION... No. 80 Special Federal Aviation Regulation 80—Alternative Communications and Dispatching Procedures 1. Applicability. This Special Federal Aviation Regulation applies to each holder of an air carrier or operating...

Useful new technology

NASA Technical Reports Server (NTRS)

1971-01-01

An information booklet on the Technology Utilization program is presented. Industrial benefits, how to obtain technological data, special publications, Regional Dissemination Centers, multidisciplinary application teams, interagency activities, and patents and licenses are described briefly.

Sandia National Laboratories: Careers: Special Programs

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

40 CFR 1045.655 - What special provisions apply for installing and removing altitude kits?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What special provisions apply for installing and removing altitude kits? 1045.655 Section 1045.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.635 - What special provisions apply for small-volume engine manufacturers?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false What special provisions apply for small-volume engine manufacturers? 1045.635 Section 1045.635 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.635 - What special provisions apply for small-volume engine manufacturers?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false What special provisions apply for small-volume engine manufacturers? 1045.635 Section 1045.635 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.655 - What special provisions apply for installing and removing altitude kits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false What special provisions apply for installing and removing altitude kits? 1045.655 Section 1045.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.655 - What special provisions apply for installing and removing altitude kits?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply for installing and removing altitude kits? 1045.655 Section 1045.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.635 - What special provisions apply for small-volume engine manufacturers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply for small-volume engine manufacturers? 1045.635 Section 1045.635 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.635 - What special provisions apply for small-volume engine manufacturers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What special provisions apply for small-volume engine manufacturers? 1045.635 Section 1045.635 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.655 - What special provisions apply for installing and removing altitude kits?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false What special provisions apply for installing and removing altitude kits? 1045.655 Section 1045.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.655 - What special provisions apply for installing and removing altitude kits?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false What special provisions apply for installing and removing altitude kits? 1045.655 Section 1045.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 89.1009 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 89.1009 Section 89.1009 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... branded engines? A manufacturer identifying the name and trademark of another company on the emission...

41 CFR 105-64.208 - What special conditions apply to release of medical records?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What special conditions apply to release of medical records? 105-64.208 Section 105-64.208 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

41 CFR 105-64.208 - What special conditions apply to release of medical records?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false What special conditions apply to release of medical records? 105-64.208 Section 105-64.208 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

41 CFR 105-64.208 - What special conditions apply to release of medical records?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What special conditions apply to release of medical records? 105-64.208 Section 105-64.208 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

41 CFR 105-64.208 - What special conditions apply to release of medical records?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What special conditions apply to release of medical records? 105-64.208 Section 105-64.208 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

41 CFR 105-64.208 - What special conditions apply to release of medical records?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What special conditions apply to release of medical records? 105-64.208 Section 105-64.208 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

40 CFR 125.133 - What special definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true What special definitions apply to this subpart? 125.133 Section 125.133 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Requirements Applicable to Cooling Water Intake Structures for New Offshore Oil and Gas Extraction Facilities...

40 CFR 125.133 - What special definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 23 2013-07-01 2013-07-01 false What special definitions apply to this subpart? 125.133 Section 125.133 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Requirements Applicable to Cooling Water Intake Structures for New Offshore Oil and Gas Extraction Facilities...

40 CFR 125.133 - What special definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false What special definitions apply to this subpart? 125.133 Section 125.133 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Requirements Applicable to Cooling Water Intake Structures for New Offshore Oil and Gas Extraction Facilities...

Using Applied Behaviour Analysis as Standard Practice in a UK Special Needs School

ERIC Educational Resources Information Center

Foran, Denise; Hoerger, Marguerite; Philpott, Hannah; Jones, Elin Walker; Hughes, J. Carl; Morgan, Jonathan

2015-01-01

This article describes how applied behaviour analysis can be implemented effectively and affordably in a maintained special needs school in the UK. Behaviour analysts collaborate with classroom teachers to provide early intensive behaviour education for young children with autism spectrum disorders (ASD), and function based behavioural…

34 CFR 380.15 - What application requirement applies to this program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What application requirement applies to this program? 380.15 Section 380.15 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND...

34 CFR 376.3 - What regulations apply to this program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What regulations apply to this program? 376.3 Section 376.3 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS...

34 CFR 380.21 - What information requirement applies to this program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What information requirement applies to this program? 380.21 Section 380.21 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND...

34 CFR 376.4 - What definitions apply to this program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What definitions apply to this program? 376.4 Section 376.4 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS...

40 CFR 1045.635 - What special provisions apply for small-volume engine manufacturers?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false What special provisions apply for small-volume engine manufacturers? 1045.635 Section 1045.635 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

Mine countermeasures (MCM) sensor technology drivers

NASA Astrophysics Data System (ADS)

Skinner, David P.

1995-06-01

In recent years, MCM has moved to the forefront of the Navy's attention. This paper describes the general problems that drive the technology requirements of classical sea mine countermeasure (MCM) sensors for those working outside of this specialized area. Sensor requirements for MCM are compared with those for antisubmarine warfare. This highlights the unique environmental issues and crucial false target problems. The elimination of false targets, not mine detection, is the principal driver of MCM sensor requirements and places special emphasis on the technologies needed for the sequential operations of detection, classification, and identification.

West Asian Special Libraries and Information Centers.

ERIC Educational Resources Information Center

Harvey, John F.

Special libraries are defined in this paper as those libraries serving such institutions as government offices, private corporations, associations, and university departments. Information centers are similar to special libraries but provide personalized, high quality reference service, usually in science and technology, and often using mechanical…

Study of the Properties of Plessey's Electrocardiographic Capacitive Electrodes for Portable Systems

NASA Astrophysics Data System (ADS)

Uvarov, A. A.; Lezhnina, I. A.; Overchuk, K. V.; Starchak, A. S.; Akhmedov, Sh D.; Larioshina, I. A.

2016-01-01

Cardiac diseases are still most widely spread in all regions of the world. And more and more devices are invented to satisfy increasing requirements of the patients. One of the perspective technologies in cardiac diagnostics is capacitive sensing ECG electrodes. This article describes a study of the properties of electrocardiographic capacitive electrodes PS25255 from Plessey Semiconductors for portable systems as well as some undocumented parameters of these sensors. We developed special cardiograph using Plessey's electrodes and applied to the number of patients with ischemic heart disease. We paid our attention mostly to the correct transition of the ST segment as it has critical impact on the diagnostics of ischemic heart disease.

Mutation Testing for Effective Verification of Digital Components of Physical Systems

NASA Astrophysics Data System (ADS)

Kushik, N. G.; Evtushenko, N. V.; Torgaev, S. N.

2015-12-01

Digital components of modern physical systems are often designed applying circuitry solutions based on the field programmable gate array technology (FPGA). Such (embedded) digital components should be carefully tested. In this paper, an approach for the verification of digital physical system components based on mutation testing is proposed. The reference description of the behavior of a digital component in the hardware description language (HDL) is mutated by introducing into it the most probable errors and, unlike mutants in high-level programming languages, the corresponding test case is effectively derived based on a comparison of special scalable representations of the specification and the constructed mutant using various logic synthesis and verification systems.

Sensory grammars for sensor networks

PubMed Central

Aloimonos, Yiannis

2009-01-01

One of the major goals of Ambient Intelligence and Smart Environments is to interpret human activity sensed by a variety of sensors. In order to develop useful technologies and a subsequent industry around smart environments, we need to proceed in a principled manner. This paper suggests that human activity can be expressed in a language. This is a special language with its own phonemes, its own morphemes (words) and its own syntax and it can be learned using machine learning techniques applied to gargantuan amounts of data collected by sensor networks. Developing such languages will create bridges between Ambient Intelligence and other disciplines. It will also provide a hierarchical structure that can lead to a successful industry. PMID:21897837

Optical diffraction tomography with fully and partially coherent illumination in high numerical aperture label-free microscopy [Invited].

PubMed

Soto, Juan M; Rodrigo, José A; Alieva, Tatiana

2018-01-01

Quantitative label-free imaging is an important tool for the study of living microorganisms that, during the last decade, has attracted wide attention from the optical community. Optical diffraction tomography (ODT) is probably the most relevant technique for quantitative label-free 3D imaging applied in wide-field microscopy in the visible range. The ODT is usually performed using spatially coherent light illumination and specially designed holographic microscopes. Nevertheless, the ODT is also compatible with partially coherent illumination and can be realized in conventional wide-field microscopes by applying refocusing techniques, as it has been recently demonstrated. Here, we compare these two ODT modalities, underlining their pros and cons and discussing the optical setups for their implementation. In particular, we pay special attention to a system that is compatible with a conventional wide-field microscope that can be used for both ODT modalities. It consists of two easily attachable modules: the first for sample illumination engineering based on digital light processing technology; the other for focus scanning by using an electrically driven tunable lens. This hardware allows for a programmable selection of the wavelength and the illumination design, and provides fast data acquisition as well. Its performance is experimentally demonstrated in the case of ODT with partially coherent illumination providing speckle-free 3D quantitative imaging.

Think about It, Too: Volume III, Part II. A Collection of Articles on Higher Order Thinking Skills. REACH: Realistic Educational Achievement Can Happen.

ERIC Educational Resources Information Center

Texas Education Agency, Austin.

This volume presents 22 papers that discuss thinking in the context of subjects taught in general education, special and vocational education, educational technology, and special programs. The key note article is: (1) "A Case for Higher Order Thinking" (G. Garcia Jr.). Under the heading "Educational Technology" are: (2)…

Structured Approaches to Participatory Design for Children: Can Targeting the Needs of Children with Autism Provide Benefits for a Broader Child Population?

ERIC Educational Resources Information Center

Benton, Laura; Johnson, Hilary

2014-01-01

In the past technology products created to overcome accessibility and usability issues experienced by individuals with special needs have also resulted in greater usability for the wider population. Technology is increasingly being seen as a key component within the education of children with special needs and recently researchers have developed…

Black Economic Advancement in the New Millennium: Globalization, Education, and Technology. Special Report: National Policy Institute (8th, Washington, DC, January 20-22, 2000).

ERIC Educational Resources Information Center

Focus, 2000

2000-01-01

This special issue presents, in capsule form, presentations from workshops at the Eighth National Policy Institute. The conference theme of black economic advancement in the new century focused on globalization, education, and technology. Ten workshops were the core of the conference, and their topics were: (1) overcoming the 2000 Census…

The Use of Wireless Technology to Augment Problem-Based Learning in Special Education Preservice Teacher Training

ERIC Educational Resources Information Center

Blackbourn, J. M.; Fillingim, Jennifer G.; McCelland, Susan; Elrod, G. Franklin; Medley, Meagan B.; Kritsonis, Mary Alice; Ray, Jan

2008-01-01

This study examines the use of wireless laptop technology to support the application of problem-based learning (PBL) in a special education methods course. This field based course used a progressive disclosure process in weekly seminars to address issues posed in a case study. Eight scenarios, all related to the case, were presented to upper level…

Use of Health Information and Communication Technologies to Promote Health and Manage Behavioral Risk Factors Associated with Chronic Disease: Applications in the Field of Health Education

ERIC Educational Resources Information Center

Stellefson, Michael; Alber, Julia M.; Wang, Min Qi; Eddy, James M.; Chaney, Beth H.; Chaney, J. Don

2015-01-01

This special issue provides real-world examples of the diverse methods health education researchers are using to expand existing applications of information and communication technologies (ICTs) for health promotion and chronic disease management. The original and review articles presented in this special issue investigate eHealth, mHealth, and…

Study on environment detection and appraisement of mining area with RS

NASA Astrophysics Data System (ADS)

Yang, Fengjie; Hou, Peng; Zhou, Guangzhu; Li, Qingting; Wang, Jie; Cheng, Jianguang

2006-12-01

In this paper, the big coal mining area Yanzhou is selected as the typical research area. According to the special dynamic change characteristic of the environment in the mining area, the environmental dynamic changes are timely monitored with the remote sensing detection technology. Environmental special factors, such as vegetation, water, air, land-over, are extracted by the professional remote sensing image processing software, then the spatial information is managed and analyzed in the geographical information system (GIS) software. As the result, the dynamic monitor and query for change information is achieved, and the special environmental factor dynamic change maps are protracted. On the base of the data coming from the remote sensing image, GIS and the traditional environment monitoring, the environmental quality is appraised with the method of indistinct matrix analysis, the multi-index and the analytical hierarchy process. At last, those provide the credible science foundation for the local environment appraised and the sustained development. In addition, this paper apply the hyper spectrum graphs by the FieldSpec Pro spectroradiometer, together with the analytical data from environmental chemical, to study the growth of vegetation which were seed in the land-over consisting of gangue, which is a new method to study the impact to vegetation that are growing in the soil.

A new construction of measurement system based on specialized microsystem design for laryngological application

NASA Astrophysics Data System (ADS)

Paczesny, Daniel; Mikłaszewicz, Franciszek

2013-10-01

This article describes the design, construction and parameters of diagnostic medical system for air humidity measurement which can be proceeded in various places of human nasal cavities and also human throat. The system can measure dynamic changes of dew point temperature (absolute value of humidity) of inspired and expired air in different places of human upper airways. During regular respiration process dew point temperature is measured in nasal cavity, middle part cavity and nasopharynx. The presented system is the next step in construction of measurement system based on specialized microsystem for laryngological application. The microsystem fabricated on silicon substrate includes microheater, microthermoresistor and interdigitated electrodes. In comparison with previously built measurement system with current version some system functionalities and measurement parameters were improved. Additionally 3D printing technology was applied for rapid prototyping a measurement system housing. Presented measurement system is set of microprocessor module with signal conditioning circuits; heated measurement head based on specialized microsystem with disposable heated pipe for air sucking from various places of upper airways; power supplier and computer application for monitoring all system parameters and presenting on-line and off-line measured results. Some example results of constructed measurement system and dew point temperature measurements during respiration cycle are presented.

High-resolution monitoring of nutrients in groundwater and surface waters: process understanding, quantification of loads and concentrations, and management applications

NASA Astrophysics Data System (ADS)

van Geer, Frans C.; Kronvang, Brian; Broers, Hans Peter

2016-09-01

Four sessions on "Monitoring Strategies: temporal trends in groundwater and surface water quality and quantity" at the EGU conferences in 2012, 2013, 2014, and 2015 and a special issue of HESS form the background for this overview of the current state of high-resolution monitoring of nutrients. The overview includes a summary of technologies applied in high-frequency monitoring of nutrients in the special issue. Moreover, we present a new assessment of the objectives behind high-frequency monitoring as classified into three main groups: (i) improved understanding of the underlying hydrological, chemical, and biological processes (PU); (ii) quantification of true nutrient concentrations and loads (Q); and (iii) operational management, including evaluation of the effects of mitigation measures (M). The contributions in the special issue focus on the implementation of high-frequency monitoring within the broader context of policy making and management of water in Europe for support of EU directives such as the Water Framework Directive, the Groundwater Directive, and the Nitrates Directive. The overview presented enabled us to highlight the typical objectives encountered in the application of high-frequency monitoring and to reflect on future developments and research needs in this growing field of expertise.

Application of fuzzy logic-neural network based reinforcement learning to proximity and docking operations: Special approach/docking testcase results

NASA Technical Reports Server (NTRS)

Jani, Yashvant

1993-01-01

As part of the RICIS project, the reinforcement learning techniques developed at Ames Research Center are being applied to proximity and docking operations using the Shuttle and Solar Maximum Mission (SMM) satellite simulation. In utilizing these fuzzy learning techniques, we use the Approximate Reasoning based Intelligent Control (ARIC) architecture, and so we use these two terms interchangeably to imply the same. This activity is carried out in the Software Technology Laboratory utilizing the Orbital Operations Simulator (OOS) and programming/testing support from other contractor personnel. This report is the final deliverable D4 in our milestones and project activity. It provides the test results for the special testcase of approach/docking scenario for the shuttle and SMM satellite. Based on our experience and analysis with the attitude and translational controllers, we have modified the basic configuration of the reinforcement learning algorithm in ARIC. The shuttle translational controller and its implementation in ARIC is described in our deliverable D3. In order to simulate the final approach and docking operations, we have set-up this special testcase as described in section 2. The ARIC performance results for these operations are discussed in section 3 and conclusions are provided in section 4 along with the summary for the project.

Desperately Seeking Special Ed Teachers

ERIC Educational Resources Information Center

Butler, Kevin

2008-01-01

It's no secret that the dearth of special education teachers has created huge headaches for district human resources departments, especially in suburban and rural areas. In addition to insufficient numbers of candidates applying for special education jobs, retention of special education teachers is an ever-greater problem, as research indicates…

The application of digital image plane holography technology to identify Chinese herbal medicine

NASA Astrophysics Data System (ADS)

Wang, Huaying; Guo, Zhongjia; Liao, Wei; Zhang, Zhihui

2012-03-01

In this paper, the imaging technology of digital image plane holography to identify the Chinese herbal medicine is studied. The optical experiment system of digital image plane holography which is the special case of pre-magnification digital holography was built. In the record system, one is an object light by using plane waves which illuminates the object, and the other one is recording hologram by using spherical light wave as reference light. There is a Micro objective lens behind the object. The second phase factor which caus ed by the Micro objective lens can be eliminated by choosing the proper position of the reference point source when digital image plane holography is recorded by spherical light. In this experiment, we use the Lygodium cells and Onion cells as the object. The experiment results with Lygodium cells and Onion cells show that digital image plane holography avoid the process of finding recording distance by using auto-focusing approach, and the phase information of the object can be reconstructed more accurately. The digital image plane holography is applied to the microscopic imaging of cells more effectively, and it is suit to apply for the identify of Chinese Herbal Medicine. And it promotes the application of digital holographic in practice.

Ergonomics and design for sustainability in healthcare: ambient assisted living and the social-environmental impact of patients lifestyle.

PubMed

Andreoni, Giuseppe; Arslan, Pelin; Costa, Fiammetta; Muschiato, Sabrina; Romero, Maximiliano

2012-01-01

This work presents considerations on Ergonomics and Design for Sustainability in the healthcare field based on research experiences of the Technology and Design for Healthcare (TeDH) research group of INDACO (Industrial design, communication, arts and fashion) department of Politecnico di Milano. In order to develop a multidisciplinary approach to design able to answer to specific user needs such as elderly in an environmental sustainable way (1) this paper shows the results we achieved concerning ergonomics and environmental impact in product development (2), the extension of this approach to interior and home design and the advantage of the application of Information Communication Technologies (ICT). ICT can help people with special needs to make their everyday life easier and more safe, at the same time, ICT can make social-environmental impact of everyday behavior evident and can be applied to manage sustainability. The specific theme is thus to integrate ergonomics and sustainability competences in the development of Ambient Assisted Living through a Product- Service System approach. The concept of product service system has the potential to improve product performances and services, establish new relations and networks with different actors in order to satisfy user needs and apply a systems approach considering environmental, social and economic factors in the users' environment.

Computer Access. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on access including adaptations in input devices, output devices, and computer interfaces. Low technology devices include "no-technology" devices (usually modifications to existing devices), simple switches, and multiple switches. High technology input…

The Council of Industrial Boiler Owners special project on non-utility fossil fuel ash classification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Svendsen, R.L.

1996-12-31

Information is outlined on the Council of Industrial Boiler Owners (CIBO) special project on non-utility fossil fuel ash classification. Data are presented on; current (1996) regulatory status of fossil-fuel combustion wastes; FBC technology identified for further study; CIBO special project methods; Bevill amendment study factors; data collection; and CIBO special project status.

48 CFR 1339.270 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COMMERCE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... to 1352.239-71, Electronic and Information Technology, in solicitations for Electronic and... Technology Resources, in all DOC solicitations and contracts for Information Technology services. The clause...

48 CFR 1339.270 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... COMMERCE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... to 1352.239-71, Electronic and Information Technology, in solicitations for Electronic and... Technology Resources, in all DOC solicitations and contracts for Information Technology services. The clause...

48 CFR 939.7002 - Contractor acquisition of information technology.

Code of Federal Regulations, 2013 CFR

2013-10-01

... information technology. 939.7002 Section 939.7002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Implementing DOE Policies and Procedures 939.7002 Contractor acquisition of information technology. (a) Management and operating (M&O...

48 CFR 1339.270 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... COMMERCE SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Electronic and Information... to 1352.239-71, Electronic and Information Technology, in solicitations for Electronic and... Technology Resources, in all DOC solicitations and contracts for Information Technology services. The clause...

48 CFR 939.7002 - Contractor acquisition of information technology.

Code of Federal Regulations, 2014 CFR

2014-10-01

... information technology. 939.7002 Section 939.7002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Implementing DOE Policies and Procedures 939.7002 Contractor acquisition of information technology. (a) Management and operating (M&O...

48 CFR 939.7002 - Contractor acquisition of information technology.

Code of Federal Regulations, 2011 CFR

2011-10-01

... information technology. 939.7002 Section 939.7002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Implementing DOE Policies and Procedures 939.7002 Contractor acquisition of information technology. (a) Management and operating (M&O...

48 CFR 939.7002 - Contractor acquisition of information technology.

Code of Federal Regulations, 2012 CFR

2012-10-01

... information technology. 939.7002 Section 939.7002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Implementing DOE Policies and Procedures 939.7002 Contractor acquisition of information technology. (a) Management and operating (M&O...

48 CFR 939.7002 - Contractor acquisition of information technology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... information technology. 939.7002 Section 939.7002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Implementing DOE Policies and Procedures 939.7002 Contractor acquisition of information technology. (a) Management and operating (M&O...

34 CFR 403.1 - What is the State Vocational and Applied Technology Education Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the State Vocational and Applied Technology... TECHNOLOGY EDUCATION PROGRAM General § 403.1 What is the State Vocational and Applied Technology Education Program? (a) Under the State Vocational and Applied Technology Education Program, the Secretary makes...

Case In Point: The Administrative Predicament of Special Education Funding.

ERIC Educational Resources Information Center

Moore-Brown, Barbra

2001-01-01

This article discusses factors that are creating fiscal stress in special education, including funding formulas which are inequitable, legal costs, limitations in funds allocated to hire instructional and administrative staff, costs for unending training needs, uncontrolled costs of nonpublic or private placements, specialized technology,…

Guide to Special Information in Scientific and Engineering Journals.

ERIC Educational Resources Information Center

Harris, Mary Elizabeth

This annotated bibliography lists 203 special features or special issues of science and technology periodicals with emphasis on compilations of information that appear in periodicals on a regular basis. Subjects covered in the guide include aeronautics, air-conditioning and refrigeration engineering, astronomy, automobiles, biology, botany,…

39 CFR 255.7 - Special arrangements for postal services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INFORMATION TECHNOLOGY § 255.7 Special arrangements for postal services. Members of the public who are unable... offer other special arrangements to that individual. (a) The Postal Operations Manual offers information... accessible to individuals in wheelchairs. Information regarding the location of the nearest center may be...

14 CFR Special Federal Aviation... - 5-Flightcrew Compartment Access and Door Designs

Code of Federal Regulations, 2010 CFR

2010-01-01

... Designs Federal Special Federal Aviation Regulation 92 Aeronautics and Space FEDERAL AVIATION... No. 92-5 Special Federal Aviation Regulation 92-5—Flightcrew Compartment Access and Door Designs 1. Applicability. This Special Federal Aviation Regulation (SFAR) applies to all operators that hold an air carrier...

14 CFR Special Federal Aviation... - 5-Flightcrew Compartment Access and Door Designs

Code of Federal Regulations, 2011 CFR

2011-01-01

... Designs Federal Special Federal Aviation Regulation 92 Aeronautics and Space FEDERAL AVIATION... No. 92-5 Special Federal Aviation Regulation 92-5—Flightcrew Compartment Access and Door Designs 1. Applicability. This Special Federal Aviation Regulation (SFAR) applies to all operators that hold an air carrier...

7 CFR 29.3057 - Special factor.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Special factor. 29.3057 Section 29.3057 Agriculture... Special factor. A symbol or term authorized to be used with specified grades. Tobacco to which a special factor is applied may meet the general specifications but has a peculiar side or characteristic which...

7 CFR 29.2299 - Special factor.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Special factor. 29.2299 Section 29.2299 Agriculture... Special factor. A symbol or term authorized to be used with specified grades. Tobacco to which a special factor is applied may meet the general specifications but has a peculiar side or characteristic which...

30 CFR 937.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... § 937.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 912.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-in situ... § 912.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 941.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-in situ... DAKOTA § 941.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 912.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-in situ... § 912.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 922.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-in situ... § 922.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 941.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... DAKOTA § 941.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 912.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Special performance standards-in situ... § 912.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 947.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... § 947.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 933.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Special performance standards-in situ... CAROLINA § 933.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 937.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-in situ... § 937.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 939.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Special performance standards-in situ... ISLAND § 939.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 905.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-In situ... § 905.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 910.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... § 910.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 921.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Special performance standards-in situ... MASSACHUSETTS § 921.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 942.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-In situ... § 942.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 939.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-in situ... ISLAND § 939.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 933.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-in situ... CAROLINA § 933.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 921.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-in situ... MASSACHUSETTS § 921.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 903.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-In situ... § 903.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, applies to any person who conducts surface coal mining...

30 CFR 933.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... CAROLINA § 933.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 942.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-In situ... § 942.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 933.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-in situ... CAROLINA § 933.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 922.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... § 922.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 910.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... § 910.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 937.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... § 937.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 922.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Special performance standards-in situ... § 922.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 921.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-in situ... MASSACHUSETTS § 921.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 942.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Special performance standards-In situ... § 942.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 942.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-In situ... § 942.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 939.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-in situ... ISLAND § 939.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 947.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... § 947.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 939.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... ISLAND § 939.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 912.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... § 912.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 922.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-in situ... § 922.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 905.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Special performance standards-In situ... § 905.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 905.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-In situ... § 905.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 941.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... DAKOTA § 941.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 903.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-In situ... § 903.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, applies to any person who conducts surface coal mining...

30 CFR 939.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-in situ... ISLAND § 939.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 937.828 - Special performance standards-in situ processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Special performance standards-in situ... § 937.828 Special performance standards—in situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts in situ...

30 CFR 942.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-In situ... § 942.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 905.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Special performance standards-In situ... § 905.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, shall apply to any person who conducts surface coal...

30 CFR 903.828 - Special performance standards-In situ processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Special performance standards-In situ... § 903.828 Special performance standards—In situ processing. Part 828 of this chapter, Special Permanent Program Performance Standards—In Situ Processing, applies to any person who conducts surface coal mining...