Tomography of atomic number and density of materials using dual-energy imaging and the Alvarez and Macovski attenuation model

NASA Astrophysics Data System (ADS)

Paziresh, M.; Kingston, A. M.; Latham, S. J.; Fullagar, W. K.; Myers, G. M.

2016-06-01

Dual-energy computed tomography and the Alvarez and Macovski [Phys. Med. Biol. 21, 733 (1976)] transmitted intensity (AMTI) model were used in this study to estimate the maps of density (ρ) and atomic number (Z) of mineralogical samples. In this method, the attenuation coefficients are represented [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)] in the form of the two most important interactions of X-rays with atoms that is, photoelectric absorption (PE) and Compton scattering (CS). This enables material discrimination as PE and CS are, respectively, dependent on the atomic number (Z) and density (ρ) of materials [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)]. Dual-energy imaging is able to identify sample materials even if the materials have similar attenuation coefficients at single-energy spectrum. We use the full model rather than applying one of several applied simplified forms [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976); Siddiqui et al., SPE Annual Technical Conference and Exhibition (Society of Petroleum Engineers, 2004); Derzhi, U.S. patent application 13/527,660 (2012); Heismann et al., J. Appl. Phys. 94, 2073-2079 (2003); Park and Kim, J. Korean Phys. Soc. 59, 2709 (2011); Abudurexiti et al., Radiol. Phys. Technol. 3, 127-135 (2010); and Kaewkhao et al., J. Quant. Spectrosc. Radiat. Transfer 109, 1260-1265 (2008)]. This paper describes the tomographic reconstruction of ρ and Z maps of mineralogical samples using the AMTI model. The full model requires precise knowledge of the X-ray energy spectra and calibration of PE and CS constants and exponents of atomic number and energy that were estimated based on fits to simulations and calibration measurements. The estimated ρ and Z images of the samples used in this paper yield average relative errors of 2.62% and 1.19% and maximum relative errors of 2.64% and 7.85%, respectively. Furthermore, we demonstrate that the method accounts for the beam hardening effect in density (ρ) and atomic number (Z) reconstructions to a significant extent.

EDITORIAL: Roberts Prize for the best paper published in 2012 Roberts Prize for the best paper published in 2012

NASA Astrophysics Data System (ADS)

Cherry, Simon; Ruffle, Jon

2013-08-01

The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award the Roberts prize for the best paper published in PMB during the previous year. The procedure for deciding the winner is a two-stage process. First, a shortlist of contenders is drawn up based on those papers that had the best referees' quality assessments, with a further quality check and endorsement by the Editorial Board. The papers on the shortlist are then reviewed by a specially convened IPEM committee consisting of members with fellow status. This committee reads the shortlisted papers and selects the winner. We have much pleasure in advising readers that the Roberts Prize for the best paper published in 2012 is awarded to Michel Defrise, Ahmadreza Rezaei and Johan Nuyts from the Vrije Universiteit Brussels and the Katholieke Universiteit Leuven, Belgium for their breakthrough paper that describes how the information needed for attenuation correction in PET imaging can be extracted, to within a constant, from time-of-flight emission data: Time-of-flight PET data determine the attenuation sinogram up to a constant 2012 Phys. Med. Biol. 57 885 Michel Defrise1, Ahmadreza Rezaei2 and Johan Nuyts2 1Department of Nuclear Medicine, Vrije Universiteit Brussel, B-1090 Brussels, Belgium 2Department of Nuclear Medicine, Katholieke Universiteit Leuven, B-3000 Leuven, Belgium This paper represents an important and timely contribution to the literature as time-of-flight PET scanners are now offered by several manufacturers. In hybrid PET/CT scanners, the PET attenuation correction, necessary for quantitative reconstruction of the tracer distribution, can be derived directly from the CT data. Sometimes, however, the PET and CT scans may be poorly aligned due to patient motion and other approaches are needed. In addition, hybrid PET/MRI scanners also, have been developed recently, and in these scanners attenuation correction of the PET data is a particularly difficult challenge as there is no direct relationship between MR signal intensity and tissue attenuation for 511 keV photons. This paper offers a possible path forwards for attenuation correction in these circumstances by exploiting consistency conditions in tandem with time-of-flight information and proves under these circumstances that the data for PET attenuation correction can be determined to within a constant. Our congratulations go to these authors. Of course all of the shortlisted papers were of an extremely high standard, and merit recognition by the community. They are listed below in alphabetical order. We also would like to thank the PMB Editorial Board and the IPEM Committee members for their hard work in assessing the papers. Simon R Cherry Editor-in-Chief Jon Ruffle Publisher References Buhr H, Büermann L, Gerlach M, Krumrey M and Rabus H 2012 Measurement of the mass energy-absorption coefficient of air for x-rays in the range from 3 keV to 60 keV Phys. Med. Biol. 57 8231 Chen W, Unkelbach J, Trofimov A, Madden T, Kooy H, Bortfeld T and Craft D 2012 Including robustness in multi-criteria optimization for intensity modulated proton therapy Phys. Med. Biol. 57 591 Clasie B M, Sharp G C, Seco J, Flanz J B and Kooy H M 2012 Numerical solutions of the gamma index in two and three dimensions Phys. Med. Biol. 57 6981 Connell T, Alexander A, Evans M and Seuntjens J 2012 An experimental feasibility study on the use of scattering foil free beams for modulated electron radiotherapy Phys. Med. Biol. 57 3259 Defrise M, Rezaei A and Nuyts J 2012 Time-of-flight PET data determine the attenuation sinogram up to a constant Phys. Med. Biol. 57 885 Dowdell S J, Clasie B, Depauw N, Metcalfe P, Rosenfeld A B, Kooy H M, Flanz J B and Paganetti H 2012 Monte Carlo study of the potential reduction in out-of-field dose using a patient-specific aperture in pencil beam scanning proton therapy Phys. Med. Biol. 57 2829 Scott A J D, Kumar S, Nahum A E and Fenwick J D 2012 Characterizing the influence of detector density on dosimeter response in non-equilibrium small photon fields Phys. Med. Biol. 57 4461 Stam M K, Crijns S P M, Zonnenberg B A, Barendrecht M M, van Vulpen M, Lagendijk J J W and Raaymakers B W 2012 Navigators for motion detection during real-time MRI-guided radiotherapy Phys. Med. Biol. 57 6797 Xia T, Alessio A M, De Man B, Manjeshwar R, Asma E and Kinahan P E 2012 Ultra-low dose CT attenuation correction for PET/CT Phys. Med. Biol. 57 309 Yamaguchi M et al 2012 Beam range estimation by measuring bremsstrahlung Phys. Med. Biol. 57 2843 For more information on this article, see medicalphysicsweb.org

Prostate Dose Escalation by Innovative Inverse Planning-Driven IMRT

DTIC Science & Technology

2006-11-01

fLJ and at each step, we find the minimizer u,\\ of J’. The Euler-Lagrange equation for the regularized J’ functional is u- div ( 1 Vu )= f E S1,2A...GD, Agazaryan N, Solberg TD . 2003. The effects of tumor motion on planning and delivery of respiratory-gated IMRT. Med Phys 30:1052-1066. Jaffray DA...modulated) radiation therapy: a review. Phys Med Biol 51 :R403-425. Wink NM, McNitt-Gray MF, Solberg TD . 2005. Optimization of multi-slice helical

Brief Report: Recruitment and Retention of Minority Children for Autism Research

ERIC Educational Resources Information Center

Zamora, Irina; Williams, Marian E.; Higareda, Marcia; Wheeler, Barbara Y.; Levitt, Pat

2016-01-01

Given the underrepresentation of ethnic minorities in health research (Heiat et al. in "Arch Int Med" 162(15):1-17, 2002; Kelly et al. in "J Nat Med Assoc" 97:777-783, 2005; United States Department of Health and Human Services. "Monitoring adherence to the NIH policy on the inclusion of women and minorities as subjects in…

Oral Contraceptives and Bone Health in Female Runners

DTIC Science & Technology

2007-08-01

shown that women with exercise - induced menstrual irregularities have a significantly higher frequency of stress fractures and low bone mass than...719, 2003. 6. Cumming D.C. Exercise -associated amenorrhea , low BMD, and estrogen replacement therapy. Arch Intern Med. 156:2193-2195, 1996. 7... exercise -associated amenorrhea : a brief report. Clin J Sport Med 5:246- 250, 1995. 13. Harel Z., and S. Riggs. Transdermal versus oral administration

Genetics Home Reference: epidermolytic hyperkeratosis

MedlinePlus

... CC, Korge BP, Markova N, Bale SJ, DiGiovanna JJ, Compton JG, Steinert PM. A leucine----proline mutation ... 70(5):821-8. Citation on PubMed DiGiovanna JJ, Bale SJ. Clinical heterogeneity in epidermolytic hyperkeratosis. Arch ...

Children Treated at an Expeditionary Military Hospital in Iraq

DTIC Science & Technology

2006-09-01

5) Gastroesophageal reflux (530.81) 1 Rectal prolapse (569.1) 1 Aspirated foreign object (934) 1 Dehydration (276.5) 1 Failure to thrive (783.41) 1...ICD-9, International Classification of Diseases , Ninth Revision. (REPRINTED) ARCH PEDIATR ADOLESC MED/ VOL 160, SEP 2006 WWW.ARCHPEDIATRICS.COM 974...Pediatric diseases and operational deployments. Mil Med. 2000;165:283- 286. 2. Chmatal P, Bohonek M, Dobiasova M, Hasek R, Cernohous M. A humanitarian

EDITORIAL: Roberts Prize for the best paper published in 2011 Roberts Prize for the best paper published in 2011

NASA Astrophysics Data System (ADS)

Cherry, Simon; Ruffle, Jon

2012-08-01

The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award an annual prize for the best paper published in PMB during the previous year. The procedure for deciding the winner is a two-stage process. First, a shortlist of contenders is drawn up based on those papers that had the best referees' quality assessments, with a further quality check and endorsement by the Editorial Board. The papers on the shortlist are then reviewed by a specially convened IPEM committee consisting of members with fellow status. This committee reads the shortlisted papers and selects the winner. We have much pleasure in advising readers that the Roberts Prize for the best paper published in 2011 is awarded to Matthew Hough et al from the University of Florida, the Francis Marion University and the National Cancer Institute, USA for their paper on a comprehensive electron dosimetry model of skeletal tissues in the adult male: An image-based skeletal dosimetry model for the ICRP reference adult male—internal electron sources 2011 Phys. Med. Biol. 56 2309 Matthew Hough1, Perry Johnson1, Didier Rajon2, Derek Jokisch3, Choonsik Lee4 and Wesley Bolch1,5 1Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, FL, USA 2Department of Neurosurgery, University of Florida, Gainesville, FL, USA 3Department of Physics and Astronomy, Francis Marion University, Florence, SC, USA 4Radiation Epidemiology Branch, National Cancer Institute, Bethesda, MD, USA 5Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA Bone marrow is one of the more radiosensitive tissues in the human body and is housed within a complex structure of bone. This paper describes a comprehensive model of energy deposition by internal electron or beta particle emitters for the ICRP reference adult male based upon ex vivo CT and microCT images of bone from a male cadaver. This work will be important for both the assessment of skeletal doses in radiation protection and nuclear medicine, and also for following external photon irradiation in medical imaging and radiotherapy. Our congratulations go to these authors. Of course all of the shortlisted papers were of an extremely high standard, and they are listed below in alphabetical order. We also would like to thank the IPEM Committee members for their hard work in reading the papers and making what must have been a difficult decision. Simon R Cherry Editor-in-Chief Jon Ruffle Publisher References Hough M, Johnson P, Rajon D, Jokisch D, Lee C and Bolch W 2011 An image-based skeletal dosimetry model for the ICRP reference adult male—internal electron sources Phys. Med. Biol. 56 2309 Jan S 2011 GATE V6: a major enhancement of the GATE simulation platform enabling modelling of CT and radiotherapy Phys. Med. Biol. 56 881 Jing H, Yang Y, and Nishikawa R M 2011 Detection of clustered microcalcifications using spatial point process modeling Phys. Med. Biol. 56 1 Li T, Thongphiew D, Zhu X, Lee W R, Vujaskovic Z, Yin F-F, Wu Q J A 2011 Adaptive prostate IGRT combining online re-optimization and re-positioning: a feasibility study Phys. Med. Biol. 56 1243 Kitchen M J, Paganin D M, Uesugi K, Allison B J, Lewis R A, Hooper S B, Pavlov K M 2011 Phase contrast image segmentation using a Laue analyser crystal Phys. Med. Biol. 56 515 Yamaya T, Mitsuhashi T, Matsumoto T, Inadama N, Nishikido F, Yoshida E, Murayama H, Kawai H, Suga M and Watanabe M 2011 A SiPM-based isotropic-3D PET detector X'tal cube with a three-dimensional array of 1 mm3 crystals Phys. Med. Biol. 56 6793 Yu Z, Wunderlich A, Dennerlein F, Lauritsch G and Noo F 2011 Line plus arc source trajectories and their R-line coverage for long-object cone-beam imaging with a C-arm system Phys. Med. Biol. 56 3447

Studies on Oxygen Toxicity in the Lungs.

DTIC Science & Technology

1980-02-29

Health 22:450-453, 1971 . gins after about seven days At this time there is pro- 10. EVANS, M. J., R. J. ST-mnEs and C. FREEMAN: Effects of nitrogen...dioxide on cell renewal in the rat lung. Arch. liferation of endothelial cells in capillaries and Type 2 Intern. Med. 128:57-60, 1971 . alveolar cells...Atmospheres perature and humidity. Changes in these Absolute (ATA). Aerosp. Med 42:1262-1265 parameters occur when the number of ani- (December 1971

Castor Seed Poisoning in Humans: A Review

DTIC Science & Technology

1990-01-18

semillas do ricino. Arch Argon Pad 1961; 56:337-339. 40. Kraszewska Z, Switlik I, Stalewski R, Gest3nberger J. Ostre zatrucie nasionami drzewa...por ingestion de semillas de ricino. A proposito de un caso. Med Clin (Barcelona) 1988; 90:716-717. 54. Ehrlich P. Experimentelle Unterzuchungen

Dehydroepiandrosterone Derivatives as Potent Antiandrogens with Marginal Agonist Activity

DTIC Science & Technology

2012-07-01

press. Other Presentations/Abstracts 1. Gordetsky J, Subik K, Choy B, Varghese M, Messing E, Miyamoto H, Yeh S: Analysis of tocopherol -associated...Abstract published in Arch Pathol Lab Med 135(9): 1128, 2011. 7 4. Gordetsky J, Varghese M, Messing E, Miyamoto H, Yeh S: Analysis of tocopherol - associated

Evolution of magnetic topology of an erupting arched laboratory magnetoplasma

NASA Astrophysics Data System (ADS)

Tripathi, S.; Gekelman, W. N.

2013-12-01

Arched magnetoplasma structures ubiquitously exist in the solar atmosphere and affect energetic phenomena such as flares and coronal mass ejections. Presence of an electrical current in such structures generates a twisted magnetic-field and the term arched magnetic flux rope (AMFR) is used for them. In the limit of low electrical current (compared to the current-threshold for the kink instability), the magnetic twist in an AMFR becomes small and it resembles the structure of an arched magnetic flux tube. However, the term arched magnetic flux rope can be used for arched magnetoplasma structures without any loss of generality. We report results on the evolution of the magnetic topology of an erupting laboratory AMFR during its eruption. The AMFR (plasma β ≈ 10-3, Lundquist number ≈ 102-105, AMFR radius/ion-gyroradius ≈ 20, B ≈ 1000 Gauss at footpoints) is created using a lanthanum hexaboride (LaB6) plasma source and it evolves in an ambient magnetoplasma produced by another LaB6 source (See Ref. [2] for details of the experiment). The eruption is triggered by gradually increasing the electrical current in the AMFR and its evolution is captured by a fast-CCD camera. The relative magnitudes of the parameters of the AMFR and the ambient magnetoplasma can be varied to simulate a variety of conditions relevant to solar eruptions. The experiment runs continuously with a 0.5 Hz repetition rate. Hence, the plasma parameters of the AMFR are recorded with a good spatiotemporal resolution (spatial-resolution/AMFR-length ≈ 10-2 - 10-3, temporal-resolution/eruption-time ≈ 10-3) using computer-controlled movable probes. The three-dimensional magnetic-field of the AMFR is directly measured using a three-axis magnetic-loop probe. The pre-eruption phase of the AMFR remains quiescent for ≈ 100 Alfven transit times and the camera images evince a persistent appearance of the AMFR during this phase. In contrast, the post-eruption phase of the AMFR is associated with significant changes in its magnetic topology. Our measurements in the post-eruption phase have identified emergence of magnetic flux ropes from the leading edge of the AMFR and excitation of fast waves and global kink mode oscillations. The main focus of this presentation will be on demonstrating the dramatic changes in the connectivity of the magnetic-field lines of the AMFR during the eruption. Implication of the magnetic-field-line connectivity to the solar AMFR eruptions will also be discussed. References: (1) Tripathi and Gekelman, Phys. Rev. Lett. 105, 075005 (2010) (2) Tripathi and Gekelman, Solar Phys. 286, 479 (2013) (Work performed at Basic Plasma Science Facility, UCLA and supported by US DOE and NSF)

Hemodynamic Changes in Rat Leg Muscles during Tourniquet-induced Ischemia-reperfusion Injury Observed by Near-infrared Spectroscopy

DTIC Science & Technology

2009-07-01

leg muscle during pressure increase (Arbabi et al 1999) and in the human leg muscle during exercise (Breit et al 1997, Egun et al 2002, van den Brand...time of flight measurement. Phys Med Biol 1988;33:1433–42. [PubMed: 3237772] Egun A, Farooq V, Torella F, Cowley R, Thorniley MS, McCollum CN. The

Improved Survival with Aggressive Surgical Management of Noncandidal Fungal Infections of the Burn Wound

DTIC Science & Technology

1982-10-01

noncandidal fungal infections were diagnosed premor- Mortality of burn patients with fungal infections diagnosed teni . This compares with 63.6" of...pathogenesis, Candida infec- cemia, illustrated evalual ion of its skin lesion . Arch. Intern. Med..128: 591-595, 1971.tions are never discovered when they are

SU-F-P-15: Report On AAPM TG 178 Gamma Knife Dosimetry and Quality Assurance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetsch, S

Purpose: AAPM Task Group 178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance was formed in August, 2008. The Task Group has 12 medical physicists, two physicians and two consultants. Methods: A round robin dosimetry intercomparison of proposed ionization chambers, electrometer and dosimetry phantoms was conducted over a 15 month period in 2011 and 2012 (Med Phys 42, 11, Nov, 2015). The data obtained at 9 institutions (with ten different Elekta Gamma Knife units) was analyzed by the lead author using several protocols. Results: The most consistent results were obtained using the Elekta ABS 16cm diameter phantom, with the TG-51 protocolmore » modified as recommended by Alfonso et al (Med Phys 35, 11, Nov 2008). A key white paper (Med Phys, in press) sponsored by Elekta Corporation, was used to obtain correction factors for the ionization chambers and phantoms used in this intercomparison. Consistent results were obtained for both Elekta Gamma Knife Model 4C and Gamma Knife Perfexion units as measured with each of two miniature ionization chambers Conclusion: The full TG 178 report gives clinical history and background of gamma stereotactic radiosurgery, clinical examples and history, quality assurance recommendations and outline of possible dosimetry protocols. The report will be reviewed by the AAPM Working Group on Recommendations for Radiotherapy External Beam Quality Assurance and then by the AAPM Science Council before publication in Medical Physics. Consultant to Elekta, Inc.« less

Monocystis julkae sp.nov., (Protista: Apicomplexa: Monocystidae) a new aseptate gregarine species of the genus Monocystis Stein, 1848 obtain from an Indian Earthworm, Eutyphoeus kherai, Julka, 1978.

PubMed

Bhowmik, Biplab; Bandyopadhyay, P K

2017-03-01

During the course of a biodiversity survey of the endoparasitic aseptate gregarines in the Malda district of West Bengal, India, seminal vesicles of the earthworm, Eutyphoeus kherai , Julka 1978 were found to be infested with a new species, Monocystis julkae sp.nov., of the genus, Monocystis Stein (Arch Anat Phys Med 181-223, 1848). The trophozoite is elongated but slightly constricted posteriorly. A tail like protrusion appears in the posterior end. Anterior end is rather wider than the posterior one. The whole body size of the trophozoite measures 102.2-184.0 (126.7 ± 19.9) µm × 40.9-81.8 (58.2 ± 10.0) µm. Size of the nucleus ranges from 10.2 to 16.3 (11.9 ± 1.9) µm × 8.1-12.2 (8.8 ± 1.2) µm. The gametocysts are ovoidal containing two unequal gametocytes. Diameter of it measures 61.3-98.1 (75.8 ± 8.6) µm. Oocysts are navicular and measures 6.9-10.0 (8.7 ± 0.9) µm × 3.0-4.6 (4.3 ± 0.4) µm.

Characterization and Cytotoxic Assessment of Ballistic Aerosol Particulates for Tungsten Alloy Penetrators into Steel Target Plates

DTIC Science & Technology

2010-08-26

Battelle Press: Columbus, OH, USA, 2006. 3. Donaldson, K.; Stone, V.; Clouter, A.; Renwick, L.; Mac Nee, W. Ultrafine Particles . Occupat. Eviron...Med. 2001, 58, 211-216. 4. Oberdörster, G. Pulmonary effects of inhaled ultrafine particles . Int. Arch. Occupat. Environ. Health 2001, 74, 1-8. 5

Exploration of the Effectiveness of Social Distancing on Respiratory Pathogen Transmission Implicates Environmental Contributions

DTIC Science & Technology

2008-09-01

during an influenza outbreak in a nursing home: a prospective study. Arch Intern Med 1988; 148:559 – 61. 6. Morris RD, Munasinghe RL. Geographic...long-term paediatric facility, New Jersey, 1986/87. J Hosp Infect 1991; 18:201–10. 10. Azizi BH, Zulkifli HI, Kasim S. Indoor air pollution and asthma

Laser Hazards Bibliography

DTIC Science & Technology

1989-10-31

Report LA-3204, Los Alamos Scientific Laboratory, University of California, Los Alamos, NM (6 October 1964). 95. Craik , K. J. W., On the effects of...surgery (letter), Am J Opt, 97(5): 658-9,8 (May 1984). 437. Scott, Jennifer , "The computation of temperature rises in the human eye induced by infrared...radiation," Phys Med Biol, 33(2): 243-257 (1988). 438. Scott, Jennifer , "A finite modelof heat transport in the human eye," Phsy Med Biol, 33(2): 227-241

Improving spatial resolution in skin-contact thermography: comparison between a spline based and linear interpolation.

PubMed

Giansanti, Daniele

2008-07-01

A wearable device for skin-contact thermography [Giansanti D, Maccioni G. Development and testing of a wearable integrated thermometer sensor for skin contact thermography. Med Eng Phys 2006 [ahead of print

Oral Contraceptives and Bone Health in Female Runners

DTIC Science & Technology

2006-10-01

activity. Previous cross-sectional research has shown that women with exercise - induced menstrual irregularities have a significantly higher...6. Cumming D.C. Exercise -associated amenorrhea , low BMD, and estrogen replacement therapy. Arch Intern Med. 156:2193-2195, 1996. 34 7. De...Science in Sports & Exercise . (i) Abstract from manuscript, “Randomized trial of the effect of oral contraceptives on bone mass and stress

Effect of a New Local Anesthetic Buffering Device on Pain Reduction During Nerve Block lnjections

DTIC Science & Technology

2014-07-10

injection by pH buffering. Arch Emerg Med 1990;7:65-68. 15. Guyton AC, Hall JE. Textbook of medical physiology. 11th ed. St. Louis: Mosby;2006:383-387...2014. 26. Drake RL, Wayne V, Mitchell AWM. Gray’s anatomy for students. St. Louis: Mosby; 2005:21-25. 27. DiFelice M, Maller S, Hancock R

Biomarkers for PTSD

DTIC Science & Technology

2010-07-01

connected disability (5). Development of biomarkers of PTSD is critical for DOD and VA as objective indicators of PTSD for use in post -deployment medical...2 C. W. Hoge, A. Terhakopian, C. A. Castro et al., Association of posttraumatic stress disorder with somatic symptoms, health care visits, and...seen at Department of Veterans Affairs facilities. Arch Intern Med 167, 476- 82 (2007). 5 P. B. Watson and B. Daniels, Follow up of post - traumatic

Bibliography of Ticks and Tickborne Diseases from Homer (About 800 B.C.) to 31 December 1981. Volume 7.

DTIC Science & Technology

1982-05-01

Oklahoma. Brt. J.". Nu-tr..-f Arch. Pediat., Barcelona Brit. J. Nutr. BRITISH JOURNAL OF NUTRITION . ARCHIVOS DE PEDIATRIA. BARCELONA. London. Arh. Biol...INTERNATIONAL. The CEUTICAL CHEMISTRY. Nw York, Journal of Stock Breeding, Animal London Health, Nutrition and Husbandry. Surrey. J. Neurocyt. Med...INSTITUT. Tiflis. J. Therm. Biol. Nutr. Rep. Internat. JOURNAL OF THERMAL BIOLOGY. NUTRITION REPORTS INTERNATIONAL. Sutton Bonington, England. Los

Accuracy, reliability, and efficiency of intraoral scanners for full-arch impressions: a systematic review of the clinical evidence.

PubMed

Goracci, Cecilia; Franchi, Lorenzo; Vichi, Alessandro; Ferrari, Marco

2016-08-01

The interest on intraoral scanners for digital impressions has been growing and new devices are continuously introduced on the market. It is timely to verify whether the several scanners proposed for full-arch digital impressions have been tested under clinical conditions for validity, repeatability, reproducibility, as well as for time efficiency, and patient acceptance. An electronic search of the literature was conducted through PubMed, Scopus, Cochrane Library, Web of Science, and Embase, entering the query terms 'digital impression', 'intraoral digital impression', 'intraoral scanning', 'intraoral scanner', 'intraoral digital scanner', combined by the Boolean operator 'OR'. No language or time limitation was applied. Only studies where digital full-arch impressions had been recorded intraorally were considered. In only eight studies full-arch scans had been performed intraorally. Only four studies reported data on validity, repeatability, reproducibility of digital measurements and their samples were limited to subjects in complete permanent dentition. Only two intraoral scanners, Lava COS and iTero, were tested. Scanning times were measured in six studies and varied largely. Patients' acceptance of intraoral scanning was evaluated in four studies, but it was not specifically assessed for children. The scientific evidence so far collected on intraoral scanning is neither exhaustive, nor up-to-date. Data from full-arch scans performed in children should be collected. For a meaningful assessment of time efficiency, agreement should be reached on the procedural steps to be included in the computation of scanning time. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Report of improved performance in Talbot–Lau phase-contrast computed tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Thomas, E-mail: thomas.weber@fau.de; Pelzer, Georg; Rieger, Jens

Purpose: Many expectations have been raised since the use of conventional x-ray tubes on grating-based x-ray phase-contrast imaging. Despite a reported increase in contrast-to-noise ratio (CNR) in many publications, there is doubt on whether phase-contrast computed tomography (CT) is advantageous in clinical CT scanners in vivo. The aim of this paper is to contribute to this discussion by analyzing the performance of a phase-contrast CT laboratory setup. Methods: A phase-contrast CT performance analysis was done. Projection images of a phantom were recorded, and image slices were reconstructed using standard filtered back projection methods. The resulting image slices were analyzed bymore » determining the CNRs in the attenuation and phase image. These results were compared to analytically calculated expectations according to the already published phase-contrast CT performance analysis by Raupach and Flohr [Med. Phys. 39, 4761–4774 (2012)]. There, a severe mistake was found leading to wrong predictions of the performance of phase-contrast CT. The error was corrected and with the new formulae, the experimentally obtained results matched the analytical calculations. Results: The squared ratios of the phase-contrast CNR and the attenuation CNR obtained in the authors’ experiment are five- to ten-fold higher than predicted by Raupach and Flohr [Med. Phys. 39, 4761–4774 (2012)]. The effective lateral spatial coherence length deduced outnumbers the already optimistic assumption of Raupach and Flohr [Med. Phys. 39, 4761–4774 (2012)] by a factor of 3. Conclusions: The authors’ results indicate that the assumptions made in former performance analyses are pessimistic. The break-even point, when phase-contrast CT outperforms attenuation CT, is within reach even with realistic, nonperfect gratings. Further improvements to state-of-the-art clinical CT scanners, like increasing the spatial resolution, could change the balance in favor of phase-contrast computed tomography even more. This could be done by, e.g., quantum-counting pixel detectors with four-fold smaller pixel pitches.« less

Adrenal response to corticotropin during therapy with itraconazole.

PubMed Central

Phillips, P; Graybill, J R; Fetchick, R; Dunn, J F

1987-01-01

Itraconazole is a triazole with a mechanism of action similar to that of ketoconazole. Endocrine side effects of ketoconazole, including impaired cortisol synthesis, have been well documented (A. Pont, J. R. Graybill, P. C. Craven, J. N. Galgiani, W. E. Dismukes, R. E. Reitz, and D. A. Stevens, Arch. Intern. Med. 144:2150-2153, 1984). We examined the adrenal response to corticotropin in 10 patients being treated with itraconazole. No impairment of cortisol synthesis could be demonstrated. PMID:3038002

In Harm’s Way: Infections in Deployed American Military Forces

DTIC Science & Technology

2006-05-23

as endocarditis [25]. In Iraq, Q fever was identified in US military personnel during an evaluation of an apparent outbreak of severe pneu- monia...under- lying valvulopathies is important, so that appropriate treatment can be instituted to prevent endocarditis [27]. WAR WOUND INFECTION Nearly...ninety- two cases from France, including 27 cases without endocarditis . Arch Intern Med 1993; 153:642–8. 26. Faix D, Harrison D, Riddle M, et al. Q fever

Diagnosing Diagnosis Errors: Lessons From A Multi-Institutional Collaborative Project

DTIC Science & Technology

2005-01-01

Breast Cancer Inappropriately reassured to have benign lesions - 21/435 (5%); 14 (3%) misread mammogram, 4 (1%) misread pathologic finding, 5 (1...diagnostic tests they are using. It is well known that a normal mammogram in a woman with a breast lump does not rule out the diagnosis of breast cancer ...physician delay in the diagnosis of breast cancer . Arch Intern Med 2002;162:1343–8. 27. Clark S. Spinal infections go undetected. Lancet 1998;351

Disordered Eating and Weight Changes after Deployment: Longitudinal Assessment of a Large US Military Cohort

DTIC Science & Technology

2009-02-04

anorexia nervosa . Arch Intern Med. 2005; 165(5):561–566. 11. Hadley SJ, Walsh BT. Gastrointestinal disturbances in an- orexia nervosa and bulimia nervosa ...bulimia nervosa of 8% for women and 7% for men, rates that exceed population estimates (3, 4). The elevated prev- alence of eating disorders in military...survey was able to identify individuals with bulimia nervosa , subclinical bulimia nervosa , binge- eating disorder, and subclinical binge-eating

Calculations of two new dose metrics proposed by AAPM Task Group 111 using the measurements with standard CT dosimetry phantoms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Xinhua; Zhang, Da; Liu, Bob

2013-08-15

Purpose: AAPM Task Group 111 proposed to measure the equilibrium dose-pitch product D-caret{sub eq} for scan modes involving table translation and the midpoint dose D{sub L}(0) for stationary-table modes on the central and peripheral axes of sufficiently long (e.g., at least 40 cm) phantoms. This paper presents an alternative approach to calculate both metrics using the measurements of scanning the standard computed tomographic (CT) dosimetry phantoms on CT scanners.Methods: D-caret{sub eq} was calculated from CTDI{sub 100} and ε(CTDI{sub 100}) (CTDI{sub 100} efficiency), and D{sub L}(0) was calculated from D-caret{sub eq} and the approach to equilibrium function H(L) =D{sub L}(0)/D{sub eq},more » where D{sub eq} was the equilibrium dose. CTDI{sub 100} may be directly obtained from several sources (such as medical physicist's CT scanner performance evaluation or the IMPACT CT patient dosimetry calculator), or be derived from CTDI{sub Vol} using the central to peripheral CTDI{sub 100} ratio (R{sub 100}). The authors have provided the required ε(CTDI{sub 100}) and H(L) data in two previous papers [X. Li, D. Zhang, and B. Liu, Med. Phys. 39, 901–905 (2012); and ibid. 40, 031903 (10pp.) (2013)]. R{sub 100} was assessed for a series of GE, Siemens, Philips, and Toshiba CT scanners with multiple settings of scan field of view, tube voltage, and bowtie filter.Results: The calculated D{sub L}(0) and D{sub L}(0)/D{sub eq} in PMMA and water cylinders were consistent with the measurements on two GE CT scanners (LightSpeed 16 and VCT) by Dixon and Ballard [Med. Phys. 34, 3399–3413 (2007)], the measurements on a Siemens CT scanner (SOMATOM Spirit Power) by Descamps et al. [J. Appl. Clin. Med. Phys. 13, 293–302 (2012)], and the Monte Carlo simulations by Boone [Med. Phys. 36, 4547–4554 (2009)].Conclusions: D-caret{sub eq} and D{sub L}(0) can be calculated using the alternative approach. The authors have provided the required ε(CTDI{sub 100}) and H(L) data in two previous papers. R{sub 100} is presented for a majority of multidetector CT scanners currently on the market, and can be easily assessed for other CT scanners or operating conditions not covered in this study. The central to peripheral D{sub eq} ratio is about 1.50 and 1.12 times of R{sub 100} for the 32- and 16-cm diameter PMMA phantom, respectively.« less

EDITORIAL Complexity of advanced radiation therapy necessitates multidisciplinary inquiry into dose reconstruction and risk assessment Complexity of advanced radiation therapy necessitates multidisciplinary inquiry into dose reconstruction and risk assessment

NASA Astrophysics Data System (ADS)

Newhauser, Wayne

2010-07-01

The availability of low-cost, high-performance computing is rapidly transforming the landscape of cancer research. Computational techniques are playing an increasingly important role and have become the third major method of scientific inquiry, supplementing traditional methods of observation and theory. This evolution began in the 1940s when high-performance computing techniques were developed for military applications, including radiation transport calculations. These same basic methods are still widely utilized in a broad spectrum of computational problems in medicine, including radiation cancer therapy (Rogers 2006, Spezi 2010) and radiologic diagnostic imaging (Doi 2006, Kalender 2006). Supercomputing is also now being used to study the genetics and genomics of cancer (Geurts van Kessel 2010), with application to gene sequencing (Mardis 2008), genome-wide association studies (Pearson and Manolio 2008), biomolecular dynamics (Sanbonmatsu and Tung 2007) and systems biology (Wolkenhauer et al 2010). The extensive and growing body of literature is evidence of a remarkable expansion of activity and enormous boost to cancer research from the application of high-performance computing. Early successes were facilitated by inexpensive computing resources and advances in modeling algorithms. Many contemporary models require extensive approximations and phenomenological approaches. In fact, many critical problems remain computationally intractable; the underlying physical and biological processes are simply too complex to model with contemporary theory and computing capacity. In the future, a vast stream of new insights will flow from studies that use increasingly exact models and first-principles approaches. Hence, in the war on cancer the present status of computational research could be summarized as the beginning of the beginning. For these reasons, there is a vital need for scientists and clinicians to periodically discuss progress and future plans regarding computational cancer research, particularly research involving supercomputing. In April 2010, a symposium entitled '4th Joint Symposium on Computational Medical Physics: The Nexus of Research on Cancer, Radiation, and Supercomputing: Dawn of a Golden Age?' was convened at Rice University in Houston, Texas. One objective of this symposium was to provide researchers and clinicians with an overview of recent progress in advanced radiation therapy. Another was to review basic concepts and methods from a wide variety of disciplines related to cancer radiation therapy, including supercomputing, physics, informatics, imaging, and epidemiology. The symposium featured current issues and controversies and, in particular, a review of recent advances in research on proton and photon therapies. Sessions included Current Issues in Proton Therapy for Pediatric Cancers; Current Issues in Advanced Radiotherapy for Prostate Cancer; Charged Particles in Space and Military Applications; Recent Advances in Radiation Epidemiology; Advanced Computing Techniques: Perspectives from Cancer Researchers and Computer Scientists; Radiobiologic, Dosimetric, and Outcomes Modeling; Imaging and Informatics, and a Young Investigators' Symposium. The complete program is available at www.regonline.com/joint_symposium. The symposium was attended by more than 100 delegates who delivered 47 oral presentations. The delegates included leading scientists and clinicians from the fields of epidemiology, particle physics, medical physics, mathematics, oncology, and cancer prevention. This issue of Physics in Medicine and Biology contains 13 original research articles based on selected presentations from the symposium. Each article underwent the journal's usual rigorous peer review process; we are grateful to the many individuals who contributed to this issue, including the publishing editor, board members, referees, and of course the authors, all of whom generously shared their time and expertise. The majority of articles from the symposium are interrelated and focus on dose and risk assessments related to radiation exposures from advanced radiation therapies. These research topics have become increasingly complex and require the combined expertise of researchers with highly specialized and diverse investigational skills. Innovative multidisciplinary teams will be needed to achieve breakthroughs and, ultimately, to translate the research into clinical practice (Disis and Slattery 2010). The symposium's scientific goals included fostering and promoting such multidisciplinary teams, which will work to solve these complex problems and thereby improve cancer outcomes. To help clarify how the 13 articles each contribute to the goal of improving cancer outcomes, a brief digression is necessary. The proportion of patients surviving their cancers for five years or more is large and increasing (Jemal et al 2009). Unfortunately, in survivors who received radiation therapy, the prevalence of radiogenic late effects is likewise large and increasing (cf Altekruse et al 2010, Meadows et al 2009, Hudson et al 2009, Friedman et al 2010), with the potential to become a public health issue of considerable scale (Travis 2006). A multitude of late effects are associated with radiation exposure, including the development of second cancers, cardiac toxicity, cognitive deficits, and musculoskeletal growth abnormalities in children. In modern radiation therapy, much effort is devoted to developing personalized treatments that control the tumor while minimizing acute toxicities to surrounding healthy tissues; comparatively less attention has been paid to minimizing late effects (Durante and Loeffler 2010). In recent years, however, there has been an encouraging increase in research activities seeking to quantify radiation exposures (Stovall et al 2006) and the associated risks of late effects from modern external-beam therapies (Xu et al 2008). In this issue, Zhang et al (2010) report on Monte Carlo and analytical models to predict the stray radiation exposure in a patient receiving proton radiotherapy. In this study, the authors focused on stray neutron radiation that emanated from the treatment unit. Despite the complexity of high-energy neutron dosimetry, the authors succeeded in developing a relatively simple analytical model to predict these exposures. This finding is important because, with further development, it could provide a method to predict stray radiation exposures as an enhanced form of routine treatment planning. Fontenot et al (2010) report on methods to evaluate uncertainties in comparative risk assessments; knowledge of uncertainties is vital to determine the limits of applicability in these assessments, which may in turn affect clinical and policy decisions. Howell et al (2010a) report on the accuracy of a widely used radiation treatment planning system. In particular, they investigated the system's dosimetric accuracy outside the treatment beam, e.g. due to scatter and leakage radiation from external-beam photon therapy. This study provides important illustrative evidence of the need to carefully validate dose algorithms in out-of-field regions. In a related study, Howell et al (2010b) developed a methodology to estimate doses to partially in-field and out-of-field organs. Scarboro et al (2010) report on the impact of organ size and position on out-of-field dose estimates. Taddei et al (2010a) report on the targeting accuracy of a novel device that can be used to treat age-related macular degeneration, the leading cause of blindness in the developed world. Taddei et al (2010b) report on the risks of radiogenic second cancers following proton and photon radiation therapies for liver cancer. Taddei et al (2010c) also compare the risks of radiogenic second cancers from secondary neutrons for a boy and a girl after receiving craniospinal irradiation with passively scattered proton beams. Scanned-beam proton therapy is presently considered the technologically most complex beam delivery approach and is used in only a few centers worldwide. Coutrakon et al (2010) reported on an investigation of dosimetric errors associated with the delivery of scanned proton beams. Titt et al (2010) report on a novel method to adjust the size of scanned proton beams. This study is important because our inability to produce very small beam spot sizes has been an obstacle to realizing the full clinical potential of this technique. Yepes et al (2010) report on the speedup and accuracy of a fast proton dose algorithm that uses an array of graphics processing units; this technique represents a nascent low-cost alternative to the traditional approach of high-performance computing using central processing units. Radiation exposures from kilovoltage computed tomography (CT) procedures have increased dramatically, with the fraction of collective effective dose from CT exposures rising from 3% in the early 1980s to 49% in 2006 (NCRP 2009). Proton CT is an emerging technology that may enable reductions in both proton range uncertainties and the imaging dose to the patient relative to comparable kilovoltage CT techniques. Erdelyi (2010) reports on uncertainties in electron densities estimated using proton CT. Finally, Cheung et al (2010) report on the suitability of advanced composite fiducial markers for localization of the prostate in proton therapy. Their analysis is particularly important because approximately 60% of the proton treatment capacity in the United States is used for patients with prostate cancer. The symposium was the fourth of a series entitled 'Symposia on Computational Cancer Research'. The symposia have alternately been hosted by The University of Texas M D Anderson Cancer Center, Rice University, and Northern Illinois University. The fifth joint symposium will be held in Houston, on 5-7 April 2011, and will focus on survivorship issues after childhood cancers (www.regonline.com/5thjointsymposium). On behalf of the symposium organizing committee, I hope to see you there. Wayne Newhauser, The University of Texas M D Anderson Cancer Center, USA Chairman of 4th Joint Symposium Organizing Committee and Guest Editor References Altekruse S F et al (ed) SEER Cancer Statistics Review, 1975--2007 (Bethesda, MD: National Cancer Institute) (http://seer.cancer.gov/csr/1975_2007/) based on November 2009 SEER data submission, posted to the SEER website, 2010 Cheung J, Kudchadker R J, Zhu X R, Lee A K and Newhauser W D 2010 Dose perturbations and image artifacts caused by carbon-coated ceramic and stainless steel fiducials used in proton therapy for prostate cancer Phys. Med. Biol. 55 7135-47 Coutrakon G, Wang N, Miller D W and Yang Y 2010 Dose error analysis for a scanned proton beam delivery system Phys. Med. Biol. 55 7081-96 Disis M L and Slattery J T 2010 The road we must take: multidisciplinary team science Sci. Transl. Med. 2 22cm9 Doi K 2006 Diagnostic imaging over the last 50 years: research and development in medical imaging science and technology Phys. Med. Biol. 51 R5-27 Durante M and Loeffler J S 2010 Charged particles in radiation oncology Nat. Rev. Clin. Oncol. 7 37-43 Erdelyi B 2010 Electron density uncertainties in proton computed tomography Phys. Med. Biol. 55 7121-34 Fontenot J D, Bloch C, Followill D, Titt U, Zhang M and Newhauser W D 2010 Estimate of the uncertainties in the relative risk of secondary malignant neoplasms following proton therapy and intensity-modulated photon therapy Phys. Med. Biol. 55 6987-98 Friedman D L, Whitton J, Leisenring W, Mertens A C, Hammond S, Stovall M, Donaldson S S, Meadows A T, Robison L L and Neglia J P 2010 Subsequent neoplasms in 5-year survivors of childhood cancer: the Childhood Cancer Survivor Study J. Natl Cancer Inst. 102 1083-95 Geurts van Kessel A 2010 The 'omics' of cancer Cancer Genet. Cytogenet. 203 37-42 Howell R M, Scarboro S B, Kry S F and Yaldo D Z 2010a Accuracy of out-of-field dose calculations by a commercial treatment planning system Phys. Med. Biol. 55 6999-7008 Howell R M, Scarboro S B, Taddei P J, Krishnan S, Kry S F and Newhauser W D 2010b Methodology for determining doses to in-field, out-of-field and partially in-field organs for late effects studies in proton radiotherapy Phys. Med. Biol. 55 7009-23 Hudson M M, Mulrooney D A, Bowers D C, Sklar C A, Green D M, Donaldson S S, Oeffinger K C, Neglia J P, Meadows A T and Robison L L 2009 High-risk populations identified in Childhood Cancer Survivor Study investigations: implications for risk-based surveillance J. Clin. Oncol. 27 2405-14 Jemal A, Siegel R, Ward E, Hao Y, Xu J and Thun M J 2009 Cancer statistics, 2009 CA Cancer J. Clin. 59 225-49 Kalender W A 2006 X-ray computed tomography Phys. Med. Biol. 51 R29-43 Mardis E R 2008 Next-generation DNA sequencing methods Annu. Rev. Genomics Hum. Genet. 9 387-402 Meadows A T, Friedman D L, Neglia J P, Mertens A C, Donaldson S S, Stovall M, Hammond S, Yasui Y and Inskip P D 2009 Second neoplasms in survivors of childhood cancer: findings from the Childhood Cancer Survivor Study cohort J. Clin. Oncol. 27 2356-62 NCRP (National Council on Radiation Protection and Measurements) 2009 Ionizing radiation exposure of the population of the United States {\\it NCRP Report No. 160} (Bethesda, MD: NCRP) Pearson T A and Manolio T A 2008 How to interpret a genome-wide association study JAMA 299 1335-44 Rogers D W 2006 Fifty years of Monte Carlo simulations for medical physics Phys. Med. Biol. 51 R287-301 Sanbonmatsu K Y and Tung C S 2007 High performance computing in biology: multimillion atom simulations of nanoscale systems J. Struct. Biol. 157 470-80 Scarboro S B, Stovall M, White A, Smith S A, Yaldo D, Kry S F and Howell R M 2010 Effect of organ size and position on out-of-field dose distributions during radiation therapy Phys. Med. Biol. 55 7025-36 Spezi E (ed) 2010 Special section: Selected papers from the Second European Workshop on Monte Carlo Treatment Planning (MCTP2009) Phys. Med. Biol. 55 (16) 4431-614 Stovall M, Weathers R, Kasper C, Smith S A, Travis L, Ron E and Kleinerman R 2006 Dose reconstruction for therapeutic and diagnostic radiation exposures: use in epidemiological studies Radiat. Res. 166 141-57 Taddei P J, Chell E, Hansen S, Gertner M and Newhauser W D 2010a Assessment of targeting accuracy of a low-energy stereotactic radiosurgery treatment for age-related macular degeneration Phys. Med. Biol. 55 7037-54 Taddei P J, Howell R M, Krishnan S, Scarboro S B, Mirkovic D and Newhauser W D 2010b Risk of second malignant neoplasm following proton versus intensity-modulated photon radiotherapies for hepatocellular carcinoma Phys. Med. Biol. 55 7055-65 Taddei P J, Mahajan A, Mirkovic D, Zhang R, Giebeler A, Kornguth D, Harvey M, Woo S and Newhauser W D 2010c Predicted risks of second malignant neoplasm incidence and mortality due to secondary neutrons in a girl and boy receiving proton craniospinal irradiation Phys. Med. Biol. 55 7067-80 Titt U, Mirkovic D, Sawakuchi G O, Perles L A, Newhauser W D, Taddei P J and Mohan R 2010 Adjustment of the lateral and longitudinal size of scanned proton beam spots using a pre-absorber to optimize penumbrae and delivery efficiency Phys. Med. Biol. 55 7097-106 Travis L B 2006 The epidemiology of second primary cancers Cancer Epidemiol. Biomarkers Prev. 15 2020-6 Wolkenhauer O et al 2010 Systems biologists seek fuller integration of systems biology approaches in new cancer research programs Cancer Res. 70 12-3 Xu X G, Bednarz B and Paganetti H 2008 A review of dosimetry studies on external-beam radiation treatment with respect to second cancer induction Phys. Med. Biol. 53 R193-241 Yepes P, Mirkovic D and Taddei P J 2010 A GPU implementation of a track-repeating algorithm for proton radiotherapy dose calculations Phys. Med. Biol. 55 7107-20 Zhang R, P\\'{e}rez-And\\'{u}jar A, Fontenot J D, Taddei P J and Newhauser W D 2010 An analytic model of neutron ambient dose equivalent and equivalent dose for proton radiotherapy Phys. Med. Biol. 55 6975-85

Alliance for NanoHealth Competitive Research Program

DTIC Science & Technology

2008-10-01

changes for skin rejuvenation .32,33 2.3 Measurement of ABR Thresholds Sine wave stimuli were generated using a digital signal pro- cessing system. The...lasers for noninva- sive skin rejuvenation and toning,” Arch. Dermatol. 13910, 1265– 1276 2003. 33. M. H. Tan, J. S. Dover, T. S. Hsu, K. A. Arndt, and...B. Stewart, “Clinical evaluation of enhanced nonablative skin rejuvenation using a combination of a 532 and a 1,064 nm laser,” Lasers Surg. Med. 345

Development of In Vitro Correlate Assays of Immunity to Infection with Yersinia Pestis

DTIC Science & Technology

2007-05-01

cynomolgus macaques (CM) and African green (Chlorocebus aethiops) monkeys (AGM) vaccinated s.c. three times at 4-week intervals with the F1-V fusion...Yersinia pestis in African green monkeys . Arch. Pathol. Lab. Med. 120:156–163. 15. Faure, K., J. Fujimoto, D. W. Shimabukuro, T. Ajayi, N. Shime, K...A. Kuwae, C. Sasakawa, and S. Imajoh-Ohmi. 1999. Shigella flexneri YSH6000 induces two types of cell death, apoptosis and oncosis, in the

Journal of Rehabilitation Research and Development. Volume 27 Number 3, Summer 1990

DTIC Science & Technology

1990-01-01

First 119. Reflex Sympathetic Dystrophy in an Amputee: Case St., Springfield, IL 62794-9265 Study. Odderson IR. Czerniecki JM, Arch Ph\\vs Med Rehabil 71...60206 Compiegne cedex. France Persons with Disabilities. Becker HA. et al.. hit J Rehabil Res 12(3):235-250. 1989. 201. Psychological Aspects of...Hearing Aid Treatment. Contact: Heather A. Becker . University of Texas at Austin. Borre S. Courtois J. hit J Rehabil Res 12(3):347-348. 1989. School of

EDITORIAL: Special section: Selected papers from the Third European Workshop on Monte Carlo Treatment Planning (MCTP2012) Special section: Selected papers from the Third European Workshop on Monte Carlo Treatment Planning (MCTP2012)

NASA Astrophysics Data System (ADS)

Spezi, Emiliano; Leal, Antonio

2013-04-01

The Third European Workshop on Monte Carlo Treatment Planning (MCTP2012) was held from 15-18 May, 2012 in Seville, Spain. The event was organized by the Universidad de Sevilla with the support of the European Workgroup on Monte Carlo Treatment Planning (EWG-MCTP). MCTP2012 followed two successful meetings, one held in Ghent (Belgium) in 2006 (Reynaert 2007) and one in Cardiff (UK) in 2009 (Spezi 2010). The recurrence of these workshops together with successful events held in parallel by McGill University in Montreal (Seuntjens et al 2012), show consolidated interest from the scientific community in Monte Carlo (MC) treatment planning. The workshop was attended by a total of 90 participants, mainly coming from a medical physics background. A total of 48 oral presentations and 15 posters were delivered in specific scientific sessions including dosimetry, code development, imaging, modelling of photon and electron radiation transport, external beam radiation therapy, nuclear medicine, brachitherapy and hadrontherapy. A copy of the programme is available on the workshop's website (www.mctp2012.com). In this special section of Physics in Medicine and Biology we report six papers that were selected following the journal's rigorous peer review procedure. These papers actually provide a good cross section of the areas of application of MC in treatment planning that were discussed at MCTP2012. Czarnecki and Zink (2013) and Wagner et al (2013) present the results of their work in small field dosimetry. Czarnecki and Zink (2013) studied field size and detector dependent correction factors for diodes and ion chambers within a clinical 6MV photon beam generated by a Siemens linear accelerator. Their modelling work based on the BEAMnrc/EGSnrc codes and experimental measurements revealed that unshielded diodes were the best choice for small field dosimetry because of their independence from the electron beam spot size and correction factor close to unity. Wagner et al (2013) investigated the recombination effect on liquid ionization chambers for stereotactic radiotherapy, a field of increasing importance in external beam radiotherapy. They modelled both radiation source (Cyberknife unit) and detector with the BEAMnrc/EGSnrc codes and quantified the dependence of the response of this type of detectors on factors such as the volume effect and the electrode. They also recommended that these dependences be accounted for in measurements involving small fields. In the field of external beam radiotherapy, Chakarova et al (2013) showed how total body irradiation (TBI) could be improved by simulating patient treatments with MC. In particular, BEAMnrc/EGSnrc based simulations highlighted the importance of optimizing individual compensators for TBI treatments. In the same area of application, Mairani et al (2013) reported on a new tool for treatment planning in proton therapy based on the FLUKA MC code. The software, used to model both proton therapy beam and patient anatomy, supports single-field and multiple-field optimization and can be used to optimize physical and relative biological effectiveness (RBE)-weighted dose distribution, using both constant and variable RBE models. In the field of nuclear medicine Marcatili et al (2013) presented RAYDOSE, a Geant4-based code specifically developed for applications in molecular radiotherapy (MRT). RAYDOSE has been designed to work in MRT trials using sequential positron emission tomography (PET) or single-photon emission tomography (SPECT) imaging to model patient specific time-dependent metabolic uptake and to calculate the total 3D dose distribution. The code was validated through experimental measurements in homogeneous and heterogeneous phantoms. Finally, in the field of code development Miras et al (2013) reported on CloudMC, a Windows Azure-based application for the parallelization of MC calculations in a dynamic cluster environment. Although the performance of CloudMC has been tested with the PENELOPE MC code, the authors report that software has been designed in a way that it should be independent of the type of MC code, provided that simulation meets a number of operational criteria. We wish to thank Elekta/CMS Inc., the University of Seville, the Junta of Andalusia and the European Regional Development Fund for their financial support. We would like also to acknowledge the members of EWG-MCTP for their help in peer-reviewing all the abstracts, and all the invited speakers who kindly agreed to deliver keynote presentations in their area of expertise. A final word of thanks to our colleagues who worked on the reviewing process of the papers selected for this special section and to the IOP Publishing staff who made it possible. MCTP2012 was accredited by the European Federation of Organisations for Medical Physics as a CPD event for medical physicists. Emiliano Spezi and Antonio Leal Guest Editors References Chakarova R, Müntzing K, Krantz M, E Hedin E and Hertzman S 2013 Monte Carlo optimization of total body irradiation in a phantom and patient geometry Phys. Med. Biol. 58 2461-69 Czarnecki D and Zink K 2013 Monte Carlo calculated correction factors for diodes and ion chambers in small photon fields Phys. Med. Biol. 58 2431-44 Mairani A, Böhlen T T, Schiavi A, Tessonnier T, Molinelli S, Brons S, Battistoni G, Parodi K and Patera V 2013 A Monte Carlo-based treatment planning tool for proton therapy Phys. Med. Biol. 58 2471-90 Marcatili S, Pettinato C, Daniels S, Lewis G, Edwards P, Fanti S and Spezi E 2013 Development and validation of RAYDOSE: a Geant4 based application for molecular radiotherapy Phys. Med. Biol. 58 2491-508 Miras H, Jiménez R, Miras C and Gomà C 2013 CloudMC: A cloud computing application for Monte Carlo simulation Phys. Med. Biol. 58 N125-33 Reynaert N 2007 First European Workshop on Monte Carlo Treatment Planning J. Phys.: Conf. Ser. 74 011001 Seuntjens J, Beaulieu L, El Naqa I and Després P 2012 Special section: Selected papers from the Fourth International Workshop on Recent Advances in Monte Carlo Techniques for Radiation Therapy Phys. Med. Biol. 57 (11) E01 Spezi E 2010 Special section: Selected papers from the Second European Workshop on Monte Carlo Treatment Planning (MCTP2009) Phys. Med. Biol. 55 (16) E01 Wagner A, Crop F, Lacornerie T, Vandevelde F and Reynaert N 2013 Use of a liquid ionization chamber for stereotactic radiotherapy dosimetry Phys. Med. Biol. 58 2445-59

A Macroscopic Multifractal Analysis of Parabolic Stochastic PDEs

NASA Astrophysics Data System (ADS)

Khoshnevisan, Davar; Kim, Kunwoo; Xiao, Yimin

2018-05-01

It is generally argued that the solution to a stochastic PDE with multiplicative noise—such as \\dot{u}= 1/2 u''+uξ, where {ξ} denotes space-time white noise—routinely produces exceptionally-large peaks that are "macroscopically multifractal." See, for example, Gibbon and Doering (Arch Ration Mech Anal 177:115-150, 2005), Gibbon and Titi (Proc R Soc A 461:3089-3097, 2005), and Zimmermann et al. (Phys Rev Lett 85(17):3612-3615, 2000). A few years ago, we proved that the spatial peaks of the solution to the mentioned stochastic PDE indeed form a random multifractal in the macroscopic sense of Barlow and Taylor (J Phys A 22(13):2621-2626, 1989; Proc Lond Math Soc (3) 64:125-152, 1992). The main result of the present paper is a proof of a rigorous formulation of the assertion that the spatio-temporal peaks of the solution form infinitely-many different multifractals on infinitely-many different scales, which we sometimes refer to as "stretch factors." A simpler, though still complex, such structure is shown to also exist for the constant-coefficient version of the said stochastic PDE.

A Macroscopic Multifractal Analysis of Parabolic Stochastic PDEs

NASA Astrophysics Data System (ADS)

Khoshnevisan, Davar; Kim, Kunwoo; Xiao, Yimin

2018-04-01

It is generally argued that the solution to a stochastic PDE with multiplicative noise—such as \\dot{u}= 1/2 u''+uξ, where {ξ} denotes space-time white noise—routinely produces exceptionally-large peaks that are "macroscopically multifractal." See, for example, Gibbon and Doering (Arch Ration Mech Anal 177:115-150, 2005), Gibbon and Titi (Proc R Soc A 461:3089-3097, 2005), and Zimmermann et al. (Phys Rev Lett 85(17):3612-3615, 2000). A few years ago, we proved that the spatial peaks of the solution to the mentioned stochastic PDE indeed form a random multifractal in the macroscopic sense of Barlow and Taylor (J Phys A 22(13):2621-2626, 1989; Proc Lond Math Soc (3) 64:125-152, 1992). The main result of the present paper is a proof of a rigorous formulation of the assertion that the spatio-temporal peaks of the solution form infinitely-many different multifractals on infinitely-many different scales, which we sometimes refer to as "stretch factors." A simpler, though still complex, such structure is shown to also exist for the constant-coefficient version of the said stochastic PDE.

The Management of Cephalic Arch Stenosis in Arteriovenous Fistulas for Hemodialysis: A Systematic Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vasanthamohan, Lakshman, E-mail: lakshman.vasanthamohan@medportal.ca; Gopee-Ramanan, Prasaanthan, E-mail: Prasa.gopee@medportal.ca; Athreya, Sriharsha, E-mail: sathreya@stjoes.ca

AimTo conduct a systematic review of management of current cephalic arch stenosis (CAS) and associated outcomes in the context of dysfunctional hemodialysis access.Materials and MethodsPubMed, Web of Science, and Cochrane Library were searched to retrieve literature on the management of CAS. Studies had to focus on management of access stenosis solely in the cephalic arch. Case reports and literature reviews were excluded. Studies were categorized by intervention, and primary and secondary patency data were compiled. Studies were aggregated, and meta-analyses were performed where possible.ResultsNine papers satisfied the aforementioned criteria: five were retrospective studies and four were prospective studies. CAS managementmore » strategies have included percutaneous transluminal balloon angioplasty (PTA), peripheral cutting balloons, surgical cephalic vein transpositions, bare stents, and stent grafts. Reporting strategies varied between studies. Meta-analyses showed that results were variable even within studies using the same modality, particularly for PTA.ConclusionNo singular, definitive management strategy exists for CAS. Current studies are limited by being primarily single-center retrospective trials featuring heterogenous patient populations, interventions, and endpoints. Priorities for future studies should include larger randomized trials, more uniform management strategies and endpoints, and a longer duration of follow-up.« less

Automation and Preclinical Evaluation of a Dedicated Emission Mammotomography System for Fully 3-D Molecular Breast Imaging

DTIC Science & Technology

2008-10-01

concentrated aqueous 99m Tc and taped to the exterior surface of the breast phantom to act as fiducial markers for registration purposes. Two...34 Physica Medica, vol. 21, pp. 48-55, 2006. [16] H. Erdogan and J. A. Fessler, "Ordered subsets algorithms for transmission tomography," Phys Med Biol

New horizons in Biophysics

PubMed Central

2011-01-01

This editorial celebrates the re-launch of PMC Biophysics previously published by PhysMath Central, in its new format as BMC Biophysics published by BioMed Central with an expanded scope and Editorial Board. BMC Biophysics will fill its own niche in the BMC series alongside complementary companion journals including BMC Bioinformatics, BMC Medical Physics, BMC Structural Biology and BMC Systems Biology. PMID:21595996

Efficacy of clear aligners in controlling orthodontic tooth movement: a systematic review.

PubMed

Rossini, Gabriele; Parrini, Simone; Castroflorio, Tommaso; Deregibus, Andrea; Debernardi, Cesare L

2015-09-01

To assess the scientific evidence related to the efficacy of clear aligner treatment (CAT) in controlling orthodontic tooth movement. PubMed, PMC, NLM, Embase, Cochrane Central Register of Controlled Clinical Trials, Web of Knowledge, Scopus, Google Scholar, and LILACs were searched from January 2000 to June 2014 to identify all peer-reviewed articles potentially relevant to the review. Methodological shortcomings were highlighted and the quality of the studies was ranked using the Cochrane Tool for Risk of Bias Assessment. Eleven relevant articles were selected (two Randomized Clinical Trials (RCT), five prospective non-randomized, four retrospective non-randomized), and the risk of bias was moderate for six studies and unclear for the others. The amount of mean intrusion reported was 0.72 mm. Extrusion was the most difficult movement to control (30% of accuracy), followed by rotation. Upper molar distalization revealed the highest predictability (88%) when a bodily movement of at least 1.5 mm was prescribed. A decrease of the Little's Index (mandibular arch: 5 mm; maxillary arch: 4 mm) was observed in aligning arches. CAT aligns and levels the arches; it is effective in controlling anterior intrusion but not anterior extrusion; it is effective in controlling posterior buccolingual inclination but not anterior buccolingual inclination; it is effective in controlling upper molar bodily movements of about 1.5 mm; and it is not effective in controlling rotation of rounded teeth in particular. However, the results of this review should be interpreted with caution because of the number, quality, and heterogeneity of the studies.

Transverse Expansion and Stability after Segmental Le Fort I Osteotomy versus Surgically Assisted Rapid Maxillary Expansion: a Systematic Review

PubMed Central

Blæhr, Tue Lindberg

2016-01-01

ABSTRACT Objectives The objective of the present systematic review was to test the hypothesis of no difference in transverse skeletal and dental arch expansion and relapse after segmental Le Fort I osteotomy versus surgically assisted rapid maxillary expansion. Material and Methods A MEDLINE (PubMed), Embase and Cochrane library search in combination with a hand-search of relevant journals was conducted by including human studies published in English from January 1, 2000 to June 1, 2016. Results The search provided 130 titles and four studies fulfilled the inclusion criteria. All the included studies were characterized by high risk of bias and meta-analysis was not possible due to considerable variation. Both treatment modalities significantly increase the transverse maxillary skeletal and dental arch width. The transverse dental arch expansion and relapse seems to be substantial higher with tooth-borne surgically assisted rapid maxillary expansion compared to segmental Le Fort I osteotomy. The ratio of dental to skeletal relapse was significantly higher in the posterior maxilla with tooth-borne surgically assisted rapid maxillary expansion. Moreover, a parallel opening without segment tilting was observed after segmental Le Fort I osteotomy. Conclusions Maxillary transverse deficiency in adults can be treated successfully with both treatment modalities, although surgically assisted rapid maxillary expansion seems more effective when large transverse maxillary skeletal and dental arch expansion is required. However, considering the methodological limitations of the included studies, long-term randomized studies assessing transverse skeletal and dental expansion and relapse with the two treatment modalities are needed before definite conclusions can be provided. PMID:28154745

LETTER TO THE EDITOR: Comments on 'The influence of a novel transmission detector on 6 MV x-ray beam characteristics'

NASA Astrophysics Data System (ADS)

Harder, Dietrich

2010-02-01

In their recent paper (Venkataraman et al 2009 Phys. Med. Biol. 54 3173-83) the authors reported on photon beam attenuation and secondary electron production in the novel transmission detector COMPASS, to be placed in the accessory holder of the linac treatment head. In the interest of IMRT patient safety, space-resolved measurements by transmission detectors analysing the MLC-shaped photon fluence pattern in real time are in fact an urgent item for equipment designers. However, there are some constraints for the construction of such devices. The COMPASS system, at its present stage of development, has difficulties in complying with the constraints that the spatial sampling rate should fit the desired task and that the enhanced secondary electron contamination of the photon beam due to the presence of the device should be minimized. The authors also missed to mention a forerunner in this field, the DAVID transmission detector (Poppe et al 2006 Phys. Med. Biol. 51 1237-48), serving for the real-time supervision of the MLC aperture during patient treatment and ever since proven in clinical practice. The DAVID system, a transparent multiwire ionization chamber placed in the accessory holder, will be shortly described.

Determination of absorbed dose to water around a clinical HDR {sup 192}Ir source using LiF:Mg,Ti TLDs demonstrates an LET dependence of detector response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlsson Tedgren, Aasa; Elia, Rouba; Hedtjaern, Haakan

2012-02-15

Purpose: Experimental radiation dosimetry with thermoluminescent dosimeters (TLDs), calibrated in a {sup 60}Co or megavoltage (MV) photon beam, is recommended by AAPM TG-43U1for verification of Monte Carlo calculated absorbed doses around brachytherapy sources. However, it has been shown by Carlsson Tedgren et al.[Med. Phys. 38, 5539-5550 (2011)] that for TLDs of LiF:Mg,Ti, detector response was 4% higher in a {sup 137}Cs beam than in a {sup 60}Co one. The aim of this work was to investigate if similar over-response exists when measuring absorbed dose to water around {sup 192}Ir sources, using LiF:Mg,Ti dosimeters calibrated in a 6 MV photon beam.more » Methods: LiF dosimeters were calibrated to measure absorbed dose to water in a 6 MV photon beam and used to measure absorbed dose to water at distances of 3, 5, and 7 cm from a clinical high dose rate (HDR) {sup 192}Ir source in a polymethylmethacrylate (PMMA) phantom. Measured values were compared to values of absorbed dose to water calculated using a treatment planning system (TPS) including corrections for the difference in energy absorption properties between calibration quality and the quality in the users'{sup 192}Ir beam and for the use of a PMMA phantom instead of the water phantom underlying dose calculations in the TPS. Results: Measured absorbed doses to water around the {sup 192}Ir source were overestimated by 5% compared to those calculated by the TPS. Corresponding absorbed doses to water measured in a previous work with lithium formate electron paramagnetic resonance (EPR) dosimeters by Antonovic et al. [Med. Phys. 36, 2236-2247 (2009)], using the same irradiation setup and calibration procedure as in this work, were 2% lower than those calculated by the TPS. The results obtained in the measurements in this work and those obtained using the EPR lithium formate dosimeters were, within the expanded (k = 2) uncertainty, in agreement with the values derived by the TPS. The discrepancy between the results using LiF:Mg,Ti TLDs and the EPR lithium formate dosimeters was, however, statistically significant and in agreement with the difference in relative detector responses found for the two detector systems by Carlsson Tedgren et al. [Med. Phys. 38, 5539-5550 (2011)] and by Adolfsson et al.[Med. Phys. 37, 4946-4959 (2010)]. Conclusions: When calibrated in {sup 60}Co or MV photon beams, correction for the linear energy transfer (LET) dependence of LiF:Mg,Ti detector response will be needed as to measure absorbed doses to water in a {sup 192}Ir beam with highest accuracy. Such corrections will depend on the manufacturing process (MTS-N Poland or Harshaw TLD-100) and details of the annealing and read-out schemes used.« less

Determination of absorbed dose to water around a clinical HDR (192)Ir source using LiF:Mg,Ti TLDs demonstrates an LET dependence of detector response.

PubMed

Carlsson Tedgren, Asa; Elia, Rouba; Hedtjarn, Hakan; Olsson, Sara; Alm Carlsson, Gudrun

2012-02-01

Experimental radiation dosimetry with thermoluminescent dosimeters (TLDs), calibrated in a (60)Co or megavoltage (MV) photon beam, is recommended by AAPM TG-43U1for verification of Monte Carlo calculated absorbed doses around brachytherapy sources. However, it has been shown by Carlsson Tedgren et al. [Med. Phys. 38, 5539-5550 (2011)] that for TLDs of LiF:Mg,Ti, detector response was 4% higher in a (137)Cs beam than in a (60)Co one. The aim of this work was to investigate if similar over-response exists when measuring absorbed dose to water around (192)Ir sources, using LiF:Mg,Ti dosimeters calibrated in a 6 MV photon beam. LiF dosimeters were calibrated to measure absorbed dose to water in a 6 MV photon beam and used to measure absorbed dose to water at distances of 3, 5, and 7 cm from a clinical high dose rate (HDR) (192)Ir source in a polymethylmethacrylate (PMMA) phantom. Measured values were compared to values of absorbed dose to water calculated using a treatment planning system (TPS) including corrections for the difference in energy absorption properties between calibration quality and the quality in the users' (192)Ir beam and for the use of a PMMA phantom instead of the water phantom underlying dose calculations in the TPS. Measured absorbed doses to water around the (192)Ir source were overestimated by 5% compared to those calculated by the TPS. Corresponding absorbed doses to water measured in a previous work with lithium formate electron paramagnetic resonance (EPR) dosimeters by Antonovic et al. [Med. Phys. 36, 2236-2247 (2009)], using the same irradiation setup and calibration procedure as in this work, were 2% lower than those calculated by the TPS. The results obtained in the measurements in this work and those obtained using the EPR lithium formate dosimeters were, within the expanded (k = 2) uncertainty, in agreement with the values derived by the TPS. The discrepancy between the results using LiF:Mg,Ti TLDs and the EPR lithium formate dosimeters was, however, statistically significant and in agreement with the difference in relative detector responses found for the two detector systems by Carlsson Tedgren et al. [Med. Phys. 38, 5539-5550 (2011)] and by Adolfsson et al. [Med. Phys. 37, 4946-4959 (2010)]. When calibrated in (60)Co or MV photon beams, correction for the linear energy transfer (LET) dependence of LiF:Mg,Ti detector response will be needed as to measure absorbed doses to water in a (192)Ir beam with highest accuracy. Such corrections will depend on the manufacturing process (MTS-N Poland or Harshaw TLD-100) and details of the annealing and read-out schemes used.

A systematic review and meta-analysis of variations in branching patterns of the adult aortic arch.

PubMed

Popieluszko, Patrick; Henry, Brandon Michael; Sanna, Beatrice; Hsieh, Wan Chin; Saganiak, Karolina; Pękala, Przemysław A; Walocha, Jerzy A; Tomaszewski, Krzysztof A

2018-07-01

The aortic arch (AA) is the main conduit of the left side of the heart, providing a blood supply to the head, neck, and upper limbs. As it travels through the thorax, the pattern in which it gives off the branches to supply these structures can vary. Variations of these branching patterns have been studied; however, a study providing a comprehensive incidence of these variations has not yet been conducted. The objective of this study was to perform a meta-analysis of all the studies that report prevalence data on AA variants and to provide incidence data on the most common variants. A systematic search of online databases including PubMed, Embase, Scopus, ScienceDirect, Web of Science, SciELO, BIOSIS, and CNKI was performed for literature describing incidence of AA variations in adults. Studies including prevalence data on adult patients or cadavers were collected and their data analyzed. A total of 51 articles were included (N = 23,882 arches). Seven of the most common variants were analyzed. The most common variants found included the classic branching pattern, defined as a brachiocephalic trunk, a left common carotid, and a left subclavian artery (80.9%); the bovine arch variant (13.6%); and the left vertebral artery variant (2.8%). Compared by geographic data, bovine arch variants were noted to have a prevalence as high as 26.8% in African populations. Although patients who have an AA variant are often asymptomatic, they compose a significant portion of the population of patients and pose a greater risk of hemorrhage and ischemia during surgery in the thorax. Because of the possibility of encountering such variants, it is prudent for surgeons to consider potential variations in planning procedures, especially of an endovascular nature, in the thorax. Copyright © 2017 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

A parameterization method and application in breast tomosynthesis dosimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Xinhua; Zhang, Da; Liu, Bob

2013-09-15

Purpose: To present a parameterization method based on singular value decomposition (SVD), and to provide analytical parameterization of the mean glandular dose (MGD) conversion factors from eight references for evaluating breast tomosynthesis dose in the Mammography Quality Standards Act (MQSA) protocol and in the UK, European, and IAEA dosimetry protocols.Methods: MGD conversion factor is usually listed in lookup tables for the factors such as beam quality, breast thickness, breast glandularity, and projection angle. The authors analyzed multiple sets of MGD conversion factors from the Hologic Selenia Dimensions quality control manual and seven previous papers. Each data set was parameterized usingmore » a one- to three-dimensional polynomial function of 2–16 terms. Variable substitution was used to improve accuracy. A least-squares fit was conducted using the SVD.Results: The differences between the originally tabulated MGD conversion factors and the results computed using the parameterization algorithms were (a) 0.08%–0.18% on average and 1.31% maximum for the Selenia Dimensions quality control manual, (b) 0.09%–0.66% on average and 2.97% maximum for the published data by Dance et al. [Phys. Med. Biol. 35, 1211–1219 (1990); ibid. 45, 3225–3240 (2000); ibid. 54, 4361–4372 (2009); ibid. 56, 453–471 (2011)], (c) 0.74%–0.99% on average and 3.94% maximum for the published data by Sechopoulos et al. [Med. Phys. 34, 221–232 (2007); J. Appl. Clin. Med. Phys. 9, 161–171 (2008)], and (d) 0.66%–1.33% on average and 2.72% maximum for the published data by Feng and Sechopoulos [Radiology 263, 35–42 (2012)], excluding one sample in (d) that does not follow the trends in the published data table.Conclusions: A flexible parameterization method is presented in this paper, and was applied to breast tomosynthesis dosimetry. The resultant data offer easy and accurate computations of MGD conversion factors for evaluating mean glandular breast dose in the MQSA protocol and in the UK, European, and IAEA dosimetry protocols. Microsoft Excel™ spreadsheets are provided for the convenience of readers.« less

SU-F-I-34: How Does Longitudinal Dose Profile Change with Tube Current Distribution in CT?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, X; Yang, K; Liu, B

Purpose: To investigate how longitudinal dose profile D{sub L}(z) in 30 cm-diameter water cylinder change with tube current (mA) distribution and scan length. Methods: A constant and four variable mA distributions from two previous papers [Dixon et al., Med. Phys. 40, 111920 (14pp.) (2013); Zhang et al., Med. Phys. 41, 091911 (9pp.) (2014)] were adopted in three scan lengths of 10, 28.6, and 50 cm, and all mA distributions had the same average mA over scan ranges. Using the symmetry based dose calculation algorithms and the previously published CT dose equilibration data [Li et al., Med. Phys. 40, 031903 (10pp.)more » (2013); 41, 111910 (5pp.) (2014)], the authors calculated DL(z) on the phantom central and peripheral axes. Kolmogorov-Smirnov (K-S) test was used to compare the lineshapes of two arbitrary distributions. Results: In constant mA scans, D{sub L}(z) was “bell-shaped”. In variable mA scans, D{sub L}(z) approximately followed the mA lineshape, and the K-S distance generally changed with mA distribution. The distance decreased with scan length, and was larger on the central axis than on the peripheral axis. However, the opposite trends were found in the K-S distance between the D{sub L}(z) distributions of constant and variable mA distributions. Conclusion: Radiation dose from TCM scan is best evaluated using the specific tube current distribution. A constant mA based evaluation may lead to inconsistent longitudinal dose profile with that of TCM scan. Their difference in lineshape is larger on the phantom peripheral axis than on the central axis and increases with scan length. This work confirms that radiation dose in CT depends on not only local mA but also the overall mA distribution and scan length. On the other hand, the concept of regional tube current may be useful when scan length is large, tube current peaks near scan range edge, or the target site is superficial.« less

The IPEM code of practice for determination of the reference air kerma rate for HDR 192Ir brachytherapy sources based on the NPL air kerma standard

NASA Astrophysics Data System (ADS)

Bidmead, A. M.; Sander, T.; Locks, S. M.; Lee, C. D.; Aird, E. G. A.; Nutbrown, R. F.; Flynn, A.

2010-06-01

This paper contains the recommendations of the high dose rate (HDR) brachytherapy working party of the UK Institute of Physics and Engineering in Medicine (IPEM). The recommendations consist of a Code of Practice (COP) for the UK for measuring the reference air kerma rate (RAKR) of HDR 192Ir brachytherapy sources. In 2004, the National Physical Laboratory (NPL) commissioned a primary standard for the realization of RAKR of HDR 192Ir brachytherapy sources. This has meant that it is now possible to calibrate ionization chambers directly traceable to an air kerma standard using an 192Ir source (Sander and Nutbrown 2006 NPL Report DQL-RD 004 (Teddington: NPL) http://publications.npl.co.uk). In order to use the source specification in terms of either RAKR, \\dot K_R (ICRU 1985 ICRU Report No 38 (Washington, DC: ICRU); ICRU 1997 ICRU Report No 58 (Bethesda, MD: ICRU)), or air kerma strength, SK (Nath et al 1995 Med. Phys. 22 209-34), it has been necessary to develop algorithms that can calculate the dose at any point around brachytherapy sources within the patient tissues. The AAPM TG-43 protocol (Nath et al 1995 Med. Phys. 22 209-34) and the 2004 update TG-43U1 (Rivard et al 2004 Med. Phys. 31 633-74) have been developed more fully than any other protocol and are widely used in commercial treatment planning systems. Since the TG-43 formalism uses the quantity air kerma strength, whereas this COP uses RAKR, a unit conversion from RAKR to air kerma strength was included in the appendix to this COP. It is recommended that the measured RAKR determined with a calibrated well chamber traceable to the NPL 192Ir primary standard is used in the treatment planning system. The measurement uncertainty in the source calibration based on the system described in this COP has been reduced considerably compared to other methods based on interpolation techniques.

Using weighted power mean for equivalent square estimation.

PubMed

Zhou, Sumin; Wu, Qiuwen; Li, Xiaobo; Ma, Rongtao; Zheng, Dandan; Wang, Shuo; Zhang, Mutian; Li, Sicong; Lei, Yu; Fan, Qiyong; Hyun, Megan; Diener, Tyler; Enke, Charles

2017-11-01

Equivalent Square (ES) enables the calculation of many radiation quantities for rectangular treatment fields, based only on measurements from square fields. While it is widely applied in radiotherapy, its accuracy, especially for extremely elongated fields, still leaves room for improvement. In this study, we introduce a novel explicit ES formula based on Weighted Power Mean (WPM) function and compare its performance with the Sterling formula and Vadash/Bjärngard's formula. The proposed WPM formula is ESWPMa,b=waα+1-wbα1/α for a rectangular photon field with sides a and b. The formula performance was evaluated by three methods: standard deviation of model fitting residual error, maximum relative model prediction error, and model's Akaike Information Criterion (AIC). Testing datasets included the ES table from British Journal of Radiology (BJR), photon output factors (S cp ) from the Varian TrueBeam Representative Beam Data (Med Phys. 2012;39:6981-7018), and published S cp data for Varian TrueBeam Edge (J Appl Clin Med Phys. 2015;16:125-148). For the BJR dataset, the best-fit parameter value α = -1.25 achieved a 20% reduction in standard deviation in ES estimation residual error compared with the two established formulae. For the two Varian datasets, employing WPM reduced the maximum relative error from 3.5% (Sterling) or 2% (Vadash/Bjärngard) to 0.7% for open field sizes ranging from 3 cm to 40 cm, and the reduction was even more prominent for 1 cm field sizes on Edge (J Appl Clin Med Phys. 2015;16:125-148). The AIC value of the WPM formula was consistently lower than its counterparts from the traditional formulae on photon output factors, most prominent on very elongated small fields. The WPM formula outperformed the traditional formulae on three testing datasets. With increasing utilization of very elongated, small rectangular fields in modern radiotherapy, improved photon output factor estimation is expected by adopting the WPM formula in treatment planning and secondary MU check. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

The Effects of Chronic Exercise on the Heart and on Coronary Atherosclerotic Heart Disease. A Literature Survey

DTIC Science & Technology

1976-02-01

McAllister, F. F., R. Bertsch, and J. Jacobson. The accelerating effect of muscular exercise on experimental atherosclerosis. Arch Surg 80:54 (1959). 93. M...Lipid metabolism and muscular work. Fed Proc 26:1755 (1967). 98. Faris, A. W., F. M. Browning, and J. D. Ibach. The effect of physical training upon...total serum choleiterol levels and arterial distensibility of male ’hite rats. J Sports Med 11:24 (1971). 34 99. Rdb, rt, J. A., and A. LX"e-S

Studies on Cardiotoxin and Vasoactive-Substance-Releasing

DTIC Science & Technology

1966-07-15

8217,Ha- loc !:ing action has been studied at. "LcP (Stn, Chang & Leo , 19(C; Chang ’ Lee, 1966), "cardlotoxiii’ isolated by Sarkcr (1947) hs been shown...Intrapewi- tonerly bito mice w•J:.a; ..- :0 g. The concentration vw so adjucted that * CM-C-40 of inxa’.ia prndac:, nmedlum 4, ctpacity 7 Weq/g *N...T. (1961) Arch. int. Pharmacodyn. 8.3 180-192. Leo , C. Y. (1963) J. Siowa Med. Ass. 2 221-229. LUts1’I’e Id, J. T. & Wilcoxon, F. (1949) J. Pharmacol

MR Imaging Based Treatment Planning for Radiotherapy of Prostate Cancer

DTIC Science & Technology

2007-02-01

developed practical methods for heterogeneity correction for MRI - based dose calculations (Chen et al 2007). 6) We will use existing Monte Carlo ... Monte Carlo verification of IMRT dose distributions from a commercial treatment planning optimization system, Phys. Med. Biol., 45:2483-95 (2000) Ma...accuracy and consistency for MR based IMRT treatment planning for prostate cancer. A short paper entitled “ Monte Carlo dose verification of MR image based

Intercomparison of methods for image quality characterization. II. Noise power spectrum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobbins, James T. III; Samei, Ehsan; Ranger, Nicole T.

Second in a two-part series comparing measurement techniques for the assessment of basic image quality metrics in digital radiography, in this paper we focus on the measurement of the image noise power spectrum (NPS). Three methods were considered: (1) a method published by Dobbins et al. [Med. Phys. 22, 1581-1593 (1995)] (2) a method published by Samei et al. [Med. Phys. 30, 608-622 (2003)], and (3) a new method sanctioned by the International Electrotechnical Commission (IEC 62220-1, 2003), developed as part of an international standard for the measurement of detective quantum efficiency. In addition to an overall comparison of themore » estimated NPS between the three techniques, the following factors were also evaluated for their effect on the measured NPS: horizontal versus vertical directional dependence, the use of beam-limiting apertures, beam spectrum, and computational methods of NPS analysis, including the region-of-interest (ROI) size and the method of ROI normalization. Of these factors, none was found to demonstrate a substantial impact on the amplitude of the NPS estimates ({<=}3.1% relative difference in NPS averaged over frequency, for each factor considered separately). Overall, the three methods agreed to within 1.6%{+-}0.8% when averaged over frequencies >0.15 mm{sup -1}.« less

Trajectory dynamics study of the Ar + CH4 dissociation reaction at high temperatures: the importance of zero-point-energy effects.

PubMed

Marques, J M C; Martínez-Núñez, E; Fernandez-Ramos, A; Vazquez, S A

2005-06-23

Large-scale classical trajectory calculations have been performed to study the reaction Ar + CH4--> CH3 +H + Ar in the temperature range 2500 < or = T/K < or = 4500. The potential energy surface used for ArCH4 is the sum of the nonbonding pairwise potentials of Hase and collaborators (J. Chem. Phys. 2001, 114, 535) that models the intermolecular interaction and the CH4 intramolecular potential of Duchovic et al. (J. Phys. Chem. 1984, 88, 1339), which has been modified to account for the H-H repulsion at small bending angles. The thermal rate coefficient has been calculated, and the zero-point energy (ZPE) of the CH3 product molecule has been taken into account in the analysis of the results; also, two approaches have been applied for discarding predissociative trajectories. In both cases, good agreement is observed between the experimental and trajectory results after imposing the ZPE of CH3. The energy-transfer parameters have also been obtained from trajectory calculations and compared with available values estimated from experiment using the master equation formalism; in general, the agreement is good.

An image-based skeletal dosimetry model for the ICRP reference newborn—internal electron sources

NASA Astrophysics Data System (ADS)

Pafundi, Deanna; Rajon, Didier; Jokisch, Derek; Lee, Choonsik; Bolch, Wesley

2010-04-01

In this study, a comprehensive electron dosimetry model of newborn skeletal tissues is presented. The model is constructed using the University of Florida newborn hybrid phantom of Lee et al (2007 Phys. Med. Biol. 52 3309-33), the newborn skeletal tissue model of Pafundi et al (2009 Phys. Med. Biol. 54 4497-531) and the EGSnrc-based Paired Image Radiation Transport code of Shah et al (2005 J. Nucl. Med. 46 344-53). Target tissues include the active bone marrow (surrogate tissue for hematopoietic stem cells), shallow marrow (surrogate tissue for osteoprogenitor cells) and unossified cartilage (surrogate tissue for chondrocytes). Monoenergetic electron emissions are considered over the energy range 1 keV to 10 MeV for the following source tissues: active marrow, trabecular bone (surfaces and volumes), cortical bone (surfaces and volumes) and cartilage. Transport results are reported as specific absorbed fractions according to the MIRD schema and are given as skeletal-averaged values in the paper with bone-specific values reported in both tabular and graphic format as electronic annexes (supplementary data). The method utilized in this work uniquely includes (1) explicit accounting for the finite size and shape of newborn ossification centers (spongiosa regions), (2) explicit accounting for active and shallow marrow dose from electron emissions in cortical bone as well as sites of unossified cartilage, (3) proper accounting of the distribution of trabecular and cortical volumes and surfaces in the newborn skeleton when considering mineral bone sources and (4) explicit consideration of the marrow cellularity changes for active marrow self-irradiation as applicable to radionuclide therapy of diseased marrow in the newborn child.

Computer Simulation of Breast Cancer Screening

DTIC Science & Technology

2001-07-01

21. Tompkins PA, Abreu CC, Carroll FE, Xiao therapeutic medical physics. Med Phys 14. Gentry JR, DeWerd LA. TLD measure- QF, MacDonald CA. Use of...capillary op- 1996; 23:1997-2005. ments of in vivo mammographic expo- tics as a beam intensifier for a Compton 28. Hammerstein GR, Miller DW, White DR...cm), and was only poorly correlated thicker slices. with breast thickness (r2 0.159). The For comparison images and dosimetry , magnification factor

Stationary Digital Tomosynthesis System for Early Detection of Breast Tumors

DTIC Science & Technology

2012-05-01

Vol. 5745. 2005. 14. Y. Zhang, et al., A comparative study of limited-angle cone-beam reconstruction methods 505 for breast tomosynthesis. Med...opening angl em integratio designed line nia Dimension determine the try calibration th the detector ain is sent fro between XC urce not fou here...screening mammography. AJR, 2007. 189: p. 616. 12. P. Baldelli, et al., A prototype of a quasi-monochromatic system for mammography applications . Phys

X-Ray Phase Imaging for Breast Cancer Detection

DTIC Science & Technology

2011-09-01

the inline phase contrast imaging has good potential of greatly enhanc - ing the detection sensitivity and reducing radiation doses involved in the...the edge- enhancement generated by phase- contrast is generally useful for imaging the wrap, however, such edge- enhancements may lead interpretation...Kotre and I. P. Birch, “Phase contrast enhancement of x-ray mam- mography: A design study,” Phys. Med. Biol. 44, 2853–2866 (1999). 6F. Arfelli et al

Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review.

PubMed

Ahlholm, Pekka; Sipilä, Kirsi; Vallittu, Pekka; Jakonen, Minna; Kotiranta, Ulla

2018-01-01

To conduct a systematic review to evaluate the evidence of possible benefits and accuracy of digital impression techniques vs. conventional impression techniques. Reports of digital impression techniques versus conventional impression techniques were systematically searched for in the following databases: Cochrane Central Register of Controlled Trials, PubMed, and Web of Science. A combination of controlled vocabulary, free-text words, and well-defined inclusion and exclusion criteria guided the search. Digital impression accuracy is at the same level as conventional impression methods in fabrication of crowns and short fixed dental prostheses (FDPs). For fabrication of implant-supported crowns and FDPs, digital impression accuracy is clinically acceptable. In full-arch impressions, conventional impression methods resulted in better accuracy compared to digital impressions. Digital impression techniques are a clinically acceptable alternative to conventional impression methods in fabrication of crowns and short FDPs. For fabrication of implant-supported crowns and FDPs, digital impression systems also result in clinically acceptable fit. Digital impression techniques are faster and can shorten the operation time. Based on this study, the conventional impression technique is still recommended for full-arch impressions. © 2016 by the American College of Prosthodontists.

The H2O-CH3F Complex: a Combined Microwave and Infrared Spectroscopic Study Supported by Structure Calculations

NASA Astrophysics Data System (ADS)

Gnanasekar, Sharon Priya; Goubet, Manuel; Arunan, Elangannan; Georges, Robert; Soulard, Pascale; Asselin, Pierre; Huet, T. R.; Pirali, Olivier

2015-06-01

The H2O-CH3F complex could have two geometries, one with a hydrogen bond and one with the newly proposed carbon bond. While in general carbon bonds are weaker than hydrogen bonds, this complex appears to have comparable energies for the two structures. Infrared (IR) and microwave (MW) spectroscopic measurements using, respectively, the Jet-AILES apparatus and the FTMW spectrometer at the PhLAM laboratory, have been carried out to determine the structure of this complex. The IR spectrum shows the formation of the CH3F- H2O hydrogen bonded complex and small red-shifts in OH frequency most probably due to (CH3F)m-(H2O)n clusters. Noticeably, addition of CH_3F in the mixture promotes the formation of small water clusters. Preliminary MW spectroscopic measurements indicate the formation of the hydrogen bonded complex. So far, we have no experimental evidence for the carbon bonded structure. However, calculations of the Ar-CH3F complex show three energetically equivalent structures: a T-shape, a "fluorine" bond and a carbon bond. The MW spectrum of the (Ar)n-CH3F complexes is currently under analysis. Mani, D; Arunan, E. Phys. Chem. Chem. Phys. 2013, 15, 14377. Cirtog, M; Asselin, P; Soulard, P; Tremblay, B; Madebene, B; Alikhani, M. E; Georges, R; Moudens, A; Goubet, M; Huet, T.R; Pirali, O; Roy, P. J. Phys. Chem. A. 2011, 115, 2523 Kassi, S; Petitprez, D; Wlodarczak, G. J. Mol. Struct. 2000, 517-518, 375

Image Based Biomarker of Breast Cancer Risk: Analysis of Risk Disparity Among Minority Populations

DTIC Science & Technology

2014-03-01

attenuation coefficient of calcium hydroxyapatite ; is a parameter controlling the contrast of MCs in synthetic images (0< ə); and is the linear...effect of acquisition parameters and quantum noise," Med Phys, 37, 1591-600 (2010). [13] M. J. Yaffe, J. M. Boone, N. Packard, O. Alonzo-Proulx, S. Y...the acquisition of individual mammograms, the use of linear transformations does not seem appropriate for mammogram registration. Non-linear

On-line Adaptive Radiation Treatment of Prostate Cancer

DTIC Science & Technology

2009-01-01

12]. For intensity modulated radiation therapy (IMRT) plans , the beamlet weight can be re-optimized on a daily basis to mini- mize the dose to the OAR...Thongphiew D, Wang Z, Mathayomchan B, Chankong V, Yoo S, et al. On-line re-optimization of prostate IMRT plans for adaptive radiation therapy . Phys Med Biol...time. The treatment planning method for VMAT however is not mature. We are developing a robust VMAT treatment planning method which incorporates

B-1 Systems Approach to Training. Simulation Technology Assessment Report (STAR)

DTIC Science & Technology

1975-07-01

Psychology in the Air Force, 1974. Creelman , J.A., Evaluation of Approach Training Procedures, U.S. Naval School of Aviation Med., Proj. No. NM001-109-107...training. 3.2 PHYSICAL VERSUS PSYCHOLOGICAL SIMULATION In the previous section, the term "physical simulation" was used to represent the case where... psychology that there is no "step function" threshold. Rather, detection capability plotted against phys- ical parameter strength results in an ogival

Reply to Comment: 'A novel method for fast and robust estimation of fluorescence decay dynamics using constrained least-square deconvolution with Laguerre expansion'.

PubMed

Ma, Dinglong; Liu, Jing; Qi, Jinyi; Marcu, Laura

2017-02-21

In this response we underscore that the instrumentation described in the original publication (Liu et al 2012 Phys. Med. Biol. 57 843-65) was based on pulse-sampling technique, while the comment by Zhang et al is based on the assumption that a time-correlated single photon counting (TCSPC) instrumentation was used. Therefore the arguments made in the comment are not applicable to the noise model reported by Liu et al. As reported in the literature (Lakowicz 2006 Principles of Fluorescence Spectroscopy (New York: Springer)), while in the TCSPC the experimental noise can be estimated from Poisson statistics, such an assumption is not valid for pulse-sampling (transient recording) techniques. To further clarify this aspect, we present here a comprehensive noise model describing the signal and noise propagation of the pulse sampling time-resolved fluorescence detection. Experimental data recorded in various conditions are analyzed as a case study to demonstrate the noise model of our instrumental system. In addition, regarding the statement of correcting equation (3) in Liu et al (2012 Phys. Med. Biol. 57 843-65), the notation of discrete time Laguerre function in the original publication was clear and consistent with literature conventions (Marmarelis 1993 Ann. Biomed. Eng. 21 573-89, Westwick and Kearney 2003 Identification of Nonlinear Physiological Systems (Hoboken, NJ: Wiley)). Thus, it does not require revision.

Experimental derivation of the fluence non-uniformity correction for air kerma near brachytherapy linear sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vianello, E. A.; Almeida, C. E. de

2008-07-15

In brachytherapy, one of the elements to take into account for measurements free in air is the non-uniformity of the photon fluence due to the beam divergence that causes a steep dose gradient near the source. The correction factors for this phenomenon have been usually evaluated by two available theories by Kondo and Randolph [Radiat. Res. 13, 37-60 (1960)] and Bielajew [Phys. Med. Biol. 35, 517-538 (1990)], both conceived for point sources. This work presents the experimental validation of the Monte Carlo calculations made by Rodriguez and deAlmeida [Phys. Med. Biol. 49, 1705-1709 (2004)] for the non-uniformity correction specifically formore » a Cs-137 linear source measured using a Farmer type ionization chamber. The experimental values agree very well with the Monte Carlo calculations and differ from the results predicted by both theoretical models widely used. This result confirms that for linear sources there are some important differences at short distances from the source and emphasizes that those theories should not be used for linear sources. The data provided in this study confirm the limitations of the mentioned theories when linear sources are used. Considering the difficulties and uncertainties associated with the experimental measurements, it is recommended to use the Monte Carlo data to assess the non-uniformity factors for linear sources in situations that require this knowledge.« less

Reply to Comment: ‘A novel method for fast and robust estimation of fluorescence decay dynamics using constrained least-square deconvolution with Laguerre expansion’

NASA Astrophysics Data System (ADS)

Ma, Dinglong; Liu, Jing; Qi, Jinyi; Marcu, Laura

2017-02-01

In this response we underscore that the instrumentation described in the original publication (Liu et al 2012 Phys. Med. Biol. 57 843-65) was based on pulse-sampling technique, while the comment by Zhang et al is based on the assumption that a time-correlated single photon counting (TCSPC) instrumentation was used. Therefore the arguments made in the comment are not applicable to the noise model reported by Liu et al. As reported in the literature (Lakowicz 2006 Principles of Fluorescence Spectroscopy (New York: Springer)), while in the TCSPC the experimental noise can be estimated from Poisson statistics, such an assumption is not valid for pulse-sampling (transient recording) techniques. To further clarify this aspect, we present here a comprehensive noise model describing the signal and noise propagation of the pulse sampling time-resolved fluorescence detection. Experimental data recorded in various conditions are analyzed as a case study to demonstrate the noise model of our instrumental system. In addition, regarding the statement of correcting equation (3) in Liu et al (2012 Phys. Med. Biol. 57 843-65), the notation of discrete time Laguerre function in the original publication was clear and consistent with literature conventions (Marmarelis 1993 Ann. Biomed. Eng. 21 573-89, Westwick and Kearney 2003 Identification of Nonlinear Physiological Systems (Hoboken, NJ: Wiley)). Thus, it does not require revision.

Addendum: Measurement of charged particle yields from PMMA irradiated by a 220 MeV/u 12C beam

NASA Astrophysics Data System (ADS)

Mattei, I.; Battistoni, G.; Collini, F.; De Lucia, E.; Durante, M.; Fiore, S.; La Tessa, C.; Mancini-Terracciano, C.; Marafini, M.; Mirabelli, R.; Muraro, S.; Paramatti, R.; Piersanti, L.; Rucinski, A.; Russomando, A.; Sarti, A.; Schuy, C.; Sciubba, A.; Solfaroli Camillocci, E.; Toppi, M.; Traini, G.; Valle, S. M.; Vanstalle, M.; Patera, V.

2017-11-01

In this paper we report the re-analysis of the data published in Piersanti et al (2014 Phys. Med. Biol. 59 1857) documenting the charged secondary particles production induced by the interaction of a 220 MeV/u 12C ion beam impinging on a polymethyl methacrylate (PMMA) target, measured in 2012 at the GSI facility in Darmstadt (Germany). This re-analysis takes into account the inhomogeneous light response of the LYSO crystal in the experimental setup measured in a subsequent experiment (2014) performed in the Heidelberg Ion-Beam Therapy Center. A better description of the detector and re-calculation of the geometrical efficiencies have been implemented as well, based on an improved approach that accounts also for the energy dependence of the emission spectrum. The new analysis has little effect on the total secondary charged flux, but has an impact on the production yield and emission velocity distributions of the different particle species (protons, deuterons and tritons) at different angles with respect to the beam direction (60^\\circ and 90^\\circ ). All these observables indeed depend on the particle identification algorithms and hence on the LYSO detector energy response. The results of the data re-analysis presented here are intended to supersede and replace the results published in Piersanti et al (2014 Phys. Med. Biol. 59 1857).

Shocks in oscillated granular layers

NASA Astrophysics Data System (ADS)

Bougie, J.; Moon, Sung Joon; Swift, J. B.; Swinney, Harry L.

2001-11-01

We study shock formation in vertically oscillated granular layers, where shock waves form with each collision between the layer and the bottom plate of the container. We use both three-dimensional numerical solutions of continuum equations developed by Jenkins and Richman (J.T. Jenkins and M.W. Richman, Arch. Rat. Mech. Anal. 87), 355 (1985) for smooth and nearly elastic hard spheres, and previously validated molecular dynamics (MD) simulations (C. Bizon, M.D. Shattuck, J.B. Swift, W.D. McCormick, and H.L. Swinney, Phys. Rev. Lett. 80), 57 (1998). Both methods capture the shock formation, and the two methods agree quantitatively for small dissipation. We also investigate the effect of inelasticity on shock formation, and use both smooth and rough hard-sphere MD simulations to investigate the effect of friction in this system.

A Geometric Characterization of Certain First Integrals for Nonholonomic Systems with Symmetries

NASA Astrophysics Data System (ADS)

Balseiro, Paula; Sansonetto, Nicola

2016-02-01

We study the existence of first integrals in nonholonomic systems with symmetry. First we define the concept of M-cotangent lift of a vector field on a manifold Q in order to unify the works [Balseiro P., Arch. Ration. Mech. Anal. 214 (2014), 453-501, arXiv:1301.1091], [Fassò F., Ramos A., Sansonetto N., Regul. Chaotic Dyn. 12 (2007), 579-588], and [Fassò F., Giacobbe A., Sansonetto N., Rep. Math. Phys. 62 (2008), 345-367]. Second, we study gauge symmetries and gauge momenta, in the cases in which there are the symmetries that satisfy the so-called vertical symmetry condition. Under such condition we can predict the number of linearly independent first integrals (that are gauge momenta). We illustrate the theory with two examples.

Auto calibration of a cone-beam-CT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gross, Daniel; Heil, Ulrich; Schulze, Ralf

2012-10-15

Purpose: This paper introduces a novel autocalibration method for cone-beam-CTs (CBCT) or flat-panel CTs, assuming a perfect rotation. The method is based on ellipse-fitting. Autocalibration refers to accurate recovery of the geometric alignment of a CBCT device from projection images alone, without any manual measurements. Methods: The authors use test objects containing small arbitrarily positioned radio-opaque markers. No information regarding the relative positions of the markers is used. In practice, the authors use three to eight metal ball bearings (diameter of 1 mm), e.g., positioned roughly in a vertical line such that their projection image curves on the detector preferablymore » form large ellipses over the circular orbit. From this ellipse-to-curve mapping and also from its inversion the authors derive an explicit formula. Nonlinear optimization based on this mapping enables them to determine the six relevant parameters of the system up to the device rotation angle, which is sufficient to define the geometry of a CBCT-machine assuming a perfect rotational movement. These parameters also include out-of-plane rotations. The authors evaluate their method by simulation based on data used in two similar approaches [L. Smekal, M. Kachelriess, S. E, and K. Wa, 'Geometric misalignment and calibration in cone-beam tomography,' Med. Phys. 31(12), 3242-3266 (2004); K. Yang, A. L. C. Kwan, D. F. Miller, and J. M. Boone, 'A geometric calibration method for cone beam CT systems,' Med. Phys. 33(6), 1695-1706 (2006)]. This allows a direct comparison of accuracy. Furthermore, the authors present real-world 3D reconstructions of a dry human spine segment and an electronic device. The reconstructions were computed from projections taken with a commercial dental CBCT device having two different focus-to-detector distances that were both calibrated with their method. The authors compare their reconstruction with a reconstruction computed by the manufacturer of the CBCT device to demonstrate the achievable spatial resolution of their calibration procedure. Results: Compared to the results published in the most closely related work [K. Yang, A. L. C. Kwan, D. F. Miller, and J. M. Boone, 'A geometric calibration method for cone beam CT systems,' Med. Phys. 33(6), 1695-1706 (2006)], the simulation proved the greater accuracy of their method, as well as a lower standard deviation of roughly 1 order of magnitude. When compared to another similar approach [L. Smekal, M. Kachelriess, S. E, and K. Wa, 'Geometric misalignment and calibration in cone-beam tomography,' Med. Phys. 31(12), 3242-3266 (2004)], their results were roughly of the same order of accuracy. Their analysis revealed that the method is capable of sufficiently calibrating out-of-plane angles in cases of larger cone angles when neglecting these angles negatively affects the reconstruction. Fine details in the 3D reconstruction of the spine segment and an electronic device indicate a high geometric calibration accuracy and the capability to produce state-of-the-art reconstructions. Conclusions: The method introduced here makes no requirements on the accuracy of the test object. In contrast to many previous autocalibration methods their approach also includes out-of-plane rotations of the detector. Although assuming a perfect rotation, the method seems to be sufficiently accurate for a commercial CBCT scanner. For devices which require higher dimensional geometry models, the method could be used as a initial calibration procedure.« less

The Fourier transforms for the spatially homogeneous Boltzmann equation and Landau equation

NASA Astrophysics Data System (ADS)

Meng, Fei; Liu, Fang

2018-03-01

In this paper, we study the Fourier transforms for two equations arising in the kinetic theory. The first equation is the spatially homogeneous Boltzmann equation. The Fourier transform of the spatially homogeneous Boltzmann equation has been first addressed by Bobylev (Sov Sci Rev C Math Phys 7:111-233, 1988) in the Maxwellian case. Alexandre et al. (Arch Ration Mech Anal 152(4):327-355, 2000) investigated the Fourier transform of the gain operator for the Boltzmann operator in the cut-off case. Recently, the Fourier transform of the Boltzmann equation is extended to hard or soft potential with cut-off by Kirsch and Rjasanow (J Stat Phys 129:483-492, 2007). We shall first establish the relation between the results in Alexandre et al. (2000) and Kirsch and Rjasanow (2007) for the Fourier transform of the Boltzmann operator in the cut-off case. Then we give the Fourier transform of the spatially homogeneous Boltzmann equation in the non cut-off case. It is shown that our results cover previous works (Bobylev 1988; Kirsch and Rjasanow 2007). The second equation is the spatially homogeneous Landau equation, which can be obtained as a limit of the Boltzmann equation when grazing collisions prevail. Following the method in Kirsch and Rjasanow (2007), we can also derive the Fourier transform for Landau equation.

LAD Dissertation Prize: Laboratory Identification of Magnetohydrodynamic Eruption Criteria in the Solar Corona

NASA Astrophysics Data System (ADS)

Myers, Clayton E.; Yamada, Masaaki; Ji, Hantao

2018-06-01

Ideal magnetohydrodynamic instabilities such as the kink and torus instabilities are believed to play an important role in driving storage-and-release eruptions in the solar corona. These instabilities act on long-lived, arched magnetic flux ropes that are line-tied to the solar surface. In spite of numerous observational and computational studies, the conditions under which these instabilities produce an eruption remain a subject of intense debate. In this paper, we use a line-tied, arched flux rope experiment to systematically study storage-and-release eruption mechanisms in the laboratory [1]. Thin in situ magnetic probes facilitate the study of both the equilibrium and the stability of these laboratory flux ropes. In particular, they permit the direct measurement of magnetic (J×B) forces, both in equilibrium [2] and during dynamic events [3, 4]. Regarding stability and eruptions, two major results are reported: First, a new stability regime is identified where torus-unstable flux ropes fail to erupt. In this ‘failed torus’ regime, the flux rope is torus-unstable but kink-stable. Under these conditions, a dynamic toroidal field tension force surges in magnitude and prevents the flux rope from erupting [3, 4]. This dynamic tension force, which is missing from existing eruption models, is generated by magnetic self-organization events within the line-tied flux rope. Second, a clear torus instability threshold is observed in the kink-unstable regime. This latter result, which is consistent with existing theoretical [5] and numerical [6] results, verifies the key role of the torus instability in driving flux rope eruptions in the solar corona.[1] C. E. Myers, Ph.D. Thesis, Princeton University (2015)[2] C. E. Myers et al., Phys. Plasmas 23, 112102 (2016)[3] C. E. Myers et al., Nature 528, 526 (2015)[4] C. E. Myers et al., Plasma Phys. Control. Fusion 59, 014048 (2017)[5] O. Olmedo & J. Zhang, Astrophys. J. 718, 433 (2010)[6] T. Török & B. Kliem, Astrophys. J. 630, L97 (2005)This research is supported by DoE Contract DE-AC02-09CH11466 and by the NSF/DoE Center for Magnetic Self-Organization (CMSO).

Development and Translation of Hybrid Optoacoustic/Ultrasonic Tomography for Early Breast Cancer Detection

DTIC Science & Technology

2015-09-01

iterative algorithms of OAT to improve image fidelity. Laser ultrasound is generated through conversion of low -energy (about 100 µJ) 9 ns laser pulses ...Scherzinger, and T. Oughton, “Breast im- aging in coronal planes with simultaneous pulse echo and transmis- sion ultrasound ,” Science, vol. 214, no. 4525, pp...unidirectional pulse -echo ultrasound imaging,” Phys. Med. Biol., vol. 58, no. 17, art. no. 6163, 2013. [41] L. A. Romero, D. C. Ghiglia, C. C. Ober, and S. A

Variation of concentration of tetrakis and hydroquinone with post-irradiation times in PAGAT polymer gel dosimeter

NASA Astrophysics Data System (ADS)

Venning, Anthony J.; Hill, Brendan; Baldock, Clive

2006-12-01

Following on from the investigation of the normoxic PAGAT polymer gel dosimeter by Venning A J, Hill B, Brindha S, Healy B J and Baldock C 2005 Phys. Med. Biol. 50 3875-3888 this paper examines the change in transverse relaxation rate R2 with time for different concentrations of tetrakis (hydroxymethyl) phosphonium chloride and hydroquinone for fixed concentrations of N,N-methylene-bis-acrylamide, acrylamide, gelatine and H2M/O.

Fetal ECG Extraction From Maternal Body Surface Measurement Using Independent Component Analysis

DTIC Science & Technology

2001-10-25

Ibaraki 305-0901, Japan Abstract – A method applying independent component analysis (ICA) to detect the electrocardiogram of a prenatal cattle foetus is...monitoring the health status of an unborn cattle foetus is indispensable in preventing natural abortion and premature birth [3]. One of the applicable...and Y. Honda, “ECG and Heart Rate Detection of Prenatal Cattle Foetus Using Adaptive Digital Filtering,” World Congress on Med. Phys.& Biomed. Eng., Chicago TU-CXH-75, pp. 1-4, 2000.

Enhancement of Radiation Therapy in Prostate Cancer by DNA-PKcs Inhibitor

DTIC Science & Technology

2013-07-01

Dawen Zhao, Masaya Takahashi, Timothy Dobin, Leah Gandee, Timothy D. Solberg, Amyn A. Habib and Debabrata Saha; International Journal of Oncology, 42...5] Kong Z, Xie D, Boike T, Raghavan P, Burma S, Chen DJ, Habib AA, Chakraborty A, Hsieh JT, and Saha D (2010). Downregulation of human DAB2IP gene...study. Phys Med Biol 56: 1243-1258, 2011. 4. De Crevoisier R, Tucker SL , Dong L, et al: Increased risk of biochemical and local failure in patients

On one-dimensional compressible Navier-Stokes equations for a reacting mixture in unbounded domains

NASA Astrophysics Data System (ADS)

Li, Siran

2017-10-01

In this paper we consider the one-dimensional Navier-Stokes system for a heat-conducting, compressible reacting mixture which describes the dynamic combustion of fluids of mixed kinds on unbounded domains. This model has been discussed on bounded domains by Chen (SIAM J Math Anal 23:609-634, 1992) and Chen-Hoff-Trivisa (Arch Ration Mech Anal 166:321-358, 2003), among others, in which the reaction rate function is a discontinuous function obeying the Arrhenius' law of thermodynamics. We prove the global existence of weak solutions to this model on one-dimensional unbounded domains with large initial data in H^1. Moreover, the large-time behaviour of the weak solution is identified. In particular, the uniform-in-time bounds for the temperature and specific volume have been established via energy estimates. For this purpose we utilise techniques developed by Kazhikhov-Shelukhin (cf. Kazhikhov in Siber Math J 23:44-49, 1982; Solonnikov and Kazhikhov in Annu Rev Fluid Mech 13:79-95, 1981) and refined by Jiang (Commun Math Phys 200:181-193, 1999, Proc R Soc Edinb Sect A 132:627-638, 2002), as well as a crucial estimate in the recent work by Li-Liang (Arch Ration Mech Anal 220:1195-1208, 2016). Several new estimates are also established, in order to treat the unbounded domain and the reacting terms.

Effectiveness of the transpalatal arch in controlling orthodontic anchorage in maxillary premolar extraction cases: A systematic review and meta-analysis.

PubMed

Diar-Bakirly, Samira; Feres, Murilo Fernando Neuppmann; Saltaji, Humam; Flores-Mir, Carlos; El-Bialy, Tarek

2017-01-01

To evaluate the effectiveness of the transpalatal arch (TPA) as an anchorage device in preventing maxillary molar mesialization during retraction of the anterior teeth after premolar extraction. This systematic review intended to include patients indicated for upper premolar bilateral extraction and subsequent retraction of anterior teeth, considering the use of TPA as an anchorage tool in one of the treatment groups. The search was systematically performed, up to April 2015, in the following electronic databases: Medline, Embase, and all evidence-based medicine reviews via OVID, Cochrane Library, Scopus, PubMed, and Web of Science. Risk of bias assessment was performed using Cochrane's Risk of Bias Tool for randomized clinical trials (RCTs) and Methodological Index for Nonrandomized Studies (MINORS) for non-RCTs. Fourteen articles were finally included. Nine RCTs and five non-RCTs presented moderate to high risk of bias. Only one study investigated the use of TPA in comparison with no anchorage, failing to show significant differences regarding molar anchorage loss. A meta-analysis showed a significant increase in anchorage control when temporary anchorage devices were compared with TPA (mean difference [MD] 2.09 [95% confidence interval {CI} 1.80 to 2.38], seven trials), TPA + headgear (MD 1.71 [95% CI 0.81 to 2.6], four trials), and TPA + utility arch (MD 0.63 [95% CI 0.12 to 1.15], 3 trials). Based on mostly moderate risk of bias and with some certainty level, TPA alone should not be recommended to provide maximum anchorage during retraction of anterior teeth in extraction cases.

NOTE: Fluoroscopic gating without implanted fiducial markers for lung cancer radiotherapy based on support vector machines

NASA Astrophysics Data System (ADS)

Cui, Ying; Dy, Jennifer G.; Alexander, Brian; Jiang, Steve B.

2008-08-01

Various problems with the current state-of-the-art techniques for gated radiotherapy have prevented this new treatment modality from being widely implemented in clinical routine. These problems are caused mainly by applying various external respiratory surrogates. There might be large uncertainties in deriving the tumor position from external respiratory surrogates. While tracking implanted fiducial markers has sufficient accuracy, this procedure may not be widely accepted due to the risk of pneumothorax. Previously, we have developed a technique to generate gating signals from fluoroscopic images without implanted fiducial markers using template matching methods (Berbeco et al 2005 Phys. Med. Biol. 50 4481-90, Cui et al 2007b Phys. Med. Biol. 52 741-55). In this note, our main contribution is to provide a totally different new view of the gating problem by recasting it as a classification problem. Then, we solve this classification problem by a well-studied powerful classification method called a support vector machine (SVM). Note that the goal of an automated gating tool is to decide when to turn the beam ON or OFF. We treat ON and OFF as the two classes in our classification problem. We create our labeled training data during the patient setup session by utilizing the reference gating signal, manually determined by a radiation oncologist. We then pre-process these labeled training images and build our SVM prediction model. During treatment delivery, fluoroscopic images are continuously acquired, pre-processed and sent as an input to the SVM. Finally, our SVM model will output the predicted labels as gating signals. We test the proposed technique on five sequences of fluoroscopic images from five lung cancer patients against the reference gating signal as ground truth. We compare the performance of the SVM to our previous template matching method (Cui et al 2007b Phys. Med. Biol. 52 741-55). We find that the SVM is slightly more accurate on average (1-3%) than the template matching method, when delivering the target dose. And the average duty cycle is 4-6% longer. Given the very limited patient dataset, we cannot conclude that the SVM is more accurate and efficient than the template matching method. However, our preliminary results show that the SVM is a potentially precise and efficient algorithm for generating gating signals for radiotherapy. This work demonstrates that the gating problem can be considered as a classification problem and solved accordingly.

Medial tibial stress syndrome: conservative treatment options.

PubMed

Galbraith, R Michael; Lavallee, Mark E

2009-10-07

Medial tibial stress syndrome (MTSS), commonly known as "shin splints," is a frequent injury of the lower extremity and one of the most common causes of exertional leg pain in athletes (Willems T, Med Sci Sports Exerc 39(2):330-339, 2007; Korkola M, Amendola A, Phys Sportsmed 29(6):35-50, 2001; Hreljac A, Med Sci Sports Exerc 36(5):845-849, 2004). Although often not serious, it can be quite disabling and progress to more serious complications if not treated properly. Often, the cause of MTSS is multi-factorial and involves training errors and various biomechanical abnormalities. Few advances have been made in the treatment of MTSS over the last few decades. Current treatment options are mostly based on expert opinion and clinical experience. The purpose of this article is to review published literature regarding conservative treatment options for MTSS and provide recommendations for sports medicine clinicians for improved treatment and patient outcomes.

Development and Optimization of a Dedicated, Hybrid Dual-Modality SPECT-CmT System for Improved Breast Lesion Diagnosis

DTIC Science & Technology

2008-01-01

CT contrast agent, four 6.0mm nylon balls (Small Parts, Inc. Miami Lakes, FL) soaked in aqueous 99mTc-pertechnetate were used as markers and taped ...Inc, Miramar, Fl) were soaked in concentrated aqueous 99mTc and taped to the exterior surface of the breast phantom to act as fiducial markers for...vol. 21, pp. 48-55, 2006. [16] H. Erdogan and J. A. Fessler, "Ordered subsets algorithms for transmission tomography," Phys Med Biol, vol. 44, pp

Development of a Computer-aided Diagnosis System for Early Detection of Masses Using Retrospectively Detected Cancers on Prior Mammograms

DTIC Science & Technology

2009-06-01

131 cases with 131 biopsy proven masses, of which 27 were malignant and 104 benign. The true locations of the masses were identified by an experi- enced ...two acquisitions would cause differ- ences in the subtlety of the masses on the FFDMs and SFMs. However, assuming that the differences are ran- dom... Lado , M. Souto, and J. J. Vidal, “Computer-aided diagnosis: Automatic detection of malignant masses in digitized mammograms,” Med. Phys. 25, 957–964

Simulations to Evaluate Accuracy and Patient Dose in Neutron-Stimulated, Emission-Computed Tomography (NSECT) for Diagnosis of Breast Cancer

DTIC Science & Technology

2009-04-01

table 1 and includes all of the excited state transitions that are included in the BNL database. In this study we considered only states that could be...16Cross Section Evaluation Working Group, ENDEIB-VI Summary Docu- mentation, Report BNL -NCS-17541 ENDF-201, edited by P. F. Rose, National Nuclear Data...Med. Phys., vol. 34, pp. 3866–3871, 2007. [37] National Nuclear Data Center BNL , NuDat 2.3 2007. [38] A. J. Kapadia and C. E. Floyd, “An attenuation

The Effects of an Acute Bout of Strenuous Aerobic Exercise on Plasma, Erythrocyte, Urinary and Dietary Values for Selected Trace Minerals

DTIC Science & Technology

1996-12-09

some serum copper parameters in trained professional soccer players and control subjects. J. Sports Med. Phys. Fitness. 31:4123-416, 1991. 110. Ruz, M...WOMAN’S UNIVERSITY DEPARTMENT OF NUTRITION AND FOOD SCIENCES COLLEGE OF HEALTH SCIENCES BY KIMBERLY K. EDGREN, RD, BS, CDE DENTON, TEXAS DECEMBER 1996...of the requirements for the degree of Master of Science, with a major in Nutrition . Bett,/B. Alfor ,Ph.D., Major Professor We have read this thesis and

Comment on 'Imaging of prompt gamma rays emitted during delivery of clinical proton beams with a Compton camera: feasibility studies for range verification'.

PubMed

Sitek, Arkadiusz

2016-12-21

The origin ensemble (OE) algorithm is a new method used for image reconstruction from nuclear tomographic data. The main advantage of this algorithm is the ease of implementation for complex tomographic models and the sound statistical theory. In this comment, the author provides the basics of the statistical interpretation of OE and gives suggestions for the improvement of the algorithm in the application to prompt gamma imaging as described in Polf et al (2015 Phys. Med. Biol. 60 7085).

Comment on ‘Imaging of prompt gamma rays emitted during delivery of clinical proton beams with a Compton camera: feasibility studies for range verification’

NASA Astrophysics Data System (ADS)

Sitek, Arkadiusz

2016-12-01

The origin ensemble (OE) algorithm is a new method used for image reconstruction from nuclear tomographic data. The main advantage of this algorithm is the ease of implementation for complex tomographic models and the sound statistical theory. In this comment, the author provides the basics of the statistical interpretation of OE and gives suggestions for the improvement of the algorithm in the application to prompt gamma imaging as described in Polf et al (2015 Phys. Med. Biol. 60 7085).

Characteristic features of a high-energy x-ray spectra estimation method based on the Waggener iterative perturbation principle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iwasaki, Akira; Kubota, Mamoru; Hirota, Junichi

2006-11-15

We have redeveloped a high-energy x-ray spectra estimation method reported by Iwasaki et al. [A. Iwasaki, H. Matsutani, M. Kubota, A. Fujimori, K. Suzaki, and Y. Abe, Radiat. Phys. Chem. 67, 81-91 (2003)]. The method is based on the iterative perturbation principle to minimize differences between measured and calculated transmission curves, originally proposed by Waggener et al. [R. G. Waggener, M. M. Blough, J. A. Terry, D. Chen, N. E. Lee, S. Zhang, and W. D. McDavid, Med. Phys. 26, 1269-1278 (1999)]. The method can estimate spectra applicable for media at least from water to lead using only about tenmore » energy bins. Estimating spectra of 4-15 MV x-ray beams from a linear accelerator, we describe characteristic features of the method with regard to parameters including the prespectrum, number of transmission measurements, number of energy bins, energy bin widths, and artifactual bipeaked spectrum production.« less

Quasi-static and dynamic magnetic tension forces in arched, line-tied magnetic flux ropes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, C. E.; Yamada, M.; Ji, H.

Solar eruptions are often driven by magnetohydrodynamic instabilities such as the torus and kink instabilities that act on line-tied magnetic flux ropes. We designed our recent laboratory experiments to study these eruptive instabilities which have demonstrated the key role of both dynamic (Myers et al 2015 Nature 528 526) and quasi-static (Myers et al 2016 Phys. Plasmas 23 112102) magnetic tension forces in contributing to the equilibrium and stability of line-tied magnetic flux ropes. In our paper, we synthesize these laboratory results and explore the relationship between the dynamic and quasi-static tension forces. And while the quasi-static tension force ismore » found to contribute to the flux rope equilibrium in a number of regimes, the dynamic tension force is substantial mostly in the so-called failed torus regime where magnetic self-organization events prevent the flux rope from erupting.« less

Quasi-static and dynamic magnetic tension forces in arched, line-tied magnetic flux ropes

DOE PAGES

Myers, C. E.; Yamada, M.; Ji, H.; ...

2016-11-22

Solar eruptions are often driven by magnetohydrodynamic instabilities such as the torus and kink instabilities that act on line-tied magnetic flux ropes. We designed our recent laboratory experiments to study these eruptive instabilities which have demonstrated the key role of both dynamic (Myers et al 2015 Nature 528 526) and quasi-static (Myers et al 2016 Phys. Plasmas 23 112102) magnetic tension forces in contributing to the equilibrium and stability of line-tied magnetic flux ropes. In our paper, we synthesize these laboratory results and explore the relationship between the dynamic and quasi-static tension forces. And while the quasi-static tension force ismore » found to contribute to the flux rope equilibrium in a number of regimes, the dynamic tension force is substantial mostly in the so-called failed torus regime where magnetic self-organization events prevent the flux rope from erupting.« less

Double aortic arch

MedlinePlus

Aortic arch anomaly; Double arch; Congenital heart defect - double aortic arch; Birth defect heart - double aortic arch ... aorta is a single arch that leaves the heart and moves leftward. In double aortic arch, some ...

Sci-Sat AM: Radiation Dosimetry and Practical Therapy Solutions - 05: Not all geometries are equivalent for magnetic field Fano cavity tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malkov, Victor N.; Rogers, David W.O.

The coupling of MRI and radiation treatment systems for the application of magnetic resonance guided radiation therapy necessitates a reliable magnetic field capable Monte Carlo (MC) code. In addition to the influence of the magnetic field on dose distributions, the question of proper calibration has arisen due to the several percent variation of ion chamber and solid state detector responses in magnetic fields when compared to the 0 T case (Reynolds et al., Med Phys, 2013). In the absence of a magnetic field, EGSnrc has been shown to pass the Fano cavity test (a rigorous benchmarking tool of MC codes)more » at the 0.1 % level (Kawrakow, Med.Phys, 2000), and similar results should be required of magnetic field capable MC algorithms. To properly test such developing MC codes, the Fano cavity theorem has been adapted to function in a magnetic field (Bouchard et al., PMB, 2015). In this work, the Fano cavity test is applied in a slab and ion-chamber-like geometries to test the transport options of an implemented magnetic field algorithm in EGSnrc. Results show that the deviation of the MC dose from the expected Fano cavity theory value is highly sensitive to the choice of geometry, and the ion chamber geometry appears to pass the test more easily than larger slab geometries. As magnetic field MC codes begin to be used for dose simulations and correction factor calculations, care must be taken to apply the most rigorous Fano test geometries to ensure reliability of such algorithms.« less

Maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width groups

PubMed Central

Shahid, Fazal; Alam, Mohammad Khursheed; Khamis, Mohd Fadhli

2015-01-01

Objective: To investigate the maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width (intercanine, interpremolar, and intermolar) groups. Materials and Methods: The calculated sample size was 128 subjects. The crown width/height, arch length, arch perimeter, and arch width of the maxilla and mandible were obtained via digital calliper (Mitutoyo, Japan). A total of 4325 variables were measured. The sex differences in the crown width and height were evaluated. Analysis of variance was applied to evaluate the differences between arch length, arch perimeter, and arch width groups. Results: Males had significantly larger mean values for crown width and height than females (P ≤ 0.05) for maxillary and mandibular arches, both. There were no significant differences observed for the crown width/height ratio in various arch length, arch perimeter, and arch width (intercanine, interpremolar, and intermolar) groups (P ≤ 0.05) in maxilla and mandible, both. Conclusions: Our results indicate sexual disparities in the crown width and height. Crown width and height has no significant relation to various arch length, arch perimeter, and arch width groups of maxilla and mandible. Thus, it may be helpful for orthodontic and prosthodontic case investigations and comprehensive management. PMID:26929686

Association between foot type and lower extremity injuries: systematic literature review with meta-analysis.

PubMed

Tong, Jasper W K; Kong, Pui W

2013-10-01

Systematic literature review with meta-analysis. To investigate the association between nonneutral foot types (high arch and flatfoot) and lower extremity and low back injuries, and to identify the most appropriate methods to use for foot classification. A search of 5 electronic databases (PubMed, Embase, CINAHL, SPORTDiscus, and ProQuest Dissertations and Theses), Google Scholar, and the reference lists of included studies was conducted to identify relevant articles. The review included comparative cross-sectional, case-control, and prospective studies that reported qualitative/quantitative associations between foot types and lower extremity and back injuries. Quality of the selected studies was evaluated, and data synthesis for the level of association between foot types and injuries was conducted. A random-effects model was used to pool odds ratio (OR) and standardized mean difference (SMD) results for meta-analysis. Twenty-nine studies were included for meta-analysis. A significant association between nonneutral foot types and lower extremity injuries was determined (OR = 1.23; 95% confidence interval [CI]: 1.11, 1.37; P<.001). Foot posture index (OR = 2.58; 95% CI: 1.33, 5.02; P<.01) and visual/physical examination (OR = 1.17; 95% CI: 1.06, 1.28; P<.01) were 2 assessment methods using distinct foot-type categories that showed a significant association with lower extremity injuries. For foot-assessment methods using a continuous scale, measurements of lateral calcaneal pitch angle (SMD, 1.92; 95% CI: 1.44, 2.39; P<.00001), lateral talocalcaneal angle (SMD, 1.36; 95% CI: 0.93, 1.80; P<.00001), and navicular height (SMD, 0.34; 95% CI: 0.16, 0.52; P<.001) showed significant effect sizes in identifying high-arch foot, whereas the navicular drop test (SMD, 0.45; 95% CI: 0.03, 0.87; P<.05) and relaxed calcaneal stance position (SMD, 0.49; 95% CI: 0.01, 0.97; P<.05) displayed significant effect sizes in identifying flatfoot. Subgroup analyses revealed no significant associations for children with flatfoot, cross-sectional studies, or prospective studies on high arch. High-arch and flatfoot foot types are associated with lower extremity injuries, but the strength of this relationship is low. Although the foot posture index and visual/physical examination showed significance, they are qualitative measures. Radiographic and navicular height measurements can delineate high-arch foot effectively, with only anthropometric measures accurately classifying flatfoot. Prognosis, level 2a.

Mw Systematic Study of Alkaloids: the Distorted Tropane of Scopoline

NASA Astrophysics Data System (ADS)

Ecija, Patricia; Cocinero, Emilio J.; Basterretxea, Francisco J.; Fernandez, Jose A.; Castano, Fernando; Lesarri, Alberto

2013-06-01

Tropane alkaloids have diverse pharmacological uses and are well-known for their neurostimulant activity. Previous structure-activity-relationship established correlations between bioactivity and several aspects of ligand conformation and stereochemistry, including delicate intramolecular effects like nitrogen inversion^{a}. We have initiated a series of structural studies on tropane alkaloids^{b}, aimed to discerning their intrinsic stereochemical properties using rotational spectroscopy in supersonic jets^{c}. Here we extend these studies to the epoxytropanes, initially motivated to interrogate the influence of the epoxy group on nitrogen inversion and ring conformation. The rotational spectrum evidences a single structure in the gas phase, providing a first description of the (three ring) structurally-distorted tropane in scopoline. The determined rotational parameters of scopoline reveal the structural consequences of the intramolecular cyclation of scopine, which breaks the original epoxy group and creates a new ether bridge and a 7β-hydroxytropane configuration. The hydroxyl group further stabilizes the molecule by an O-H \\cdots N intramolecular hydrogen bond, which, in turn, forces the N-methyl group to the less stable axial form^{b}. The experimental work was supported by ab initio and DFT calculations. ^{a} i) S.Singh, Chem. Rev. 100, 925 (2000); ii) A. Krunic, D. Pan, W.J. Dunn III, S.V.S. Miariappan, Bioorg. & Med. Chem. 17, 811 (2009). ^{b} E.J. Cocinero, A. Lesarri, P. écija, J.-U. Grabow, J.A. Fernández, F. Castaño, Phys. Chem. Chem. Phys. 12, 6076 (2010). ^{c} E.J. Cocinero, A. Lesarri, P. écija, J.-U. Grabow, J.A. Fernández, F. Castaño, Phys. Chem. Chem. Phys. 12, 12486 (2010).

Correlative Feature Analysis for Multimodality Breast CAD

DTIC Science & Technology

2007-09-01

Imaging 20,12751284 (2001)22. V. Caselles, R . Kimmel, and G. Sapiro. Geodesi a tive ontours. Int. J. Comput.Vision 22, 6179 (1997)23. R . Malladi , J. A...φ ‖ ) − λ1(f0 − c1) 2 + λ2(f0 − c2) 2] + v · div[(1− 1 ‖ ∇φ ‖ )∇φ]. (24)Referen es1. A. J. Jemal, R . Siegel, E. Ward, T. Murray, J. Xu, and M. J...Med. Phys. 31,958971 (2004)11. D. Guliato, R . M. Rangayyan, W. A. Carnielli, J. A. Zuo, and J. E. L. Desautels.Segmentation of breast tumors in

Effect of interstitial fluid on the fraction of flow microstates that precede clogging in granular hoppers

NASA Astrophysics Data System (ADS)

Koivisto, Juha; Durian, Douglas J.

2017-03-01

We report on the nature of flow events for the gravity-driven discharge of glass beads through a hole that is small enough that the hopper is susceptible to clogging. In particular, we measure the average and standard deviation of the distribution of discharged masses as a function of both hole and grain sizes. We do so in air, which is usual, but also with the system entirely submerged under water. This damps the grain dynamics and could be expected to dramatically affect the distribution of the flow events, which are described in prior work as avalanche-like. Though the flow is slower and the events last longer, we find that the average discharge mass is only slightly reduced for submerged grains. Furthermore, we find that the shape of the distribution remains exponential, implying that clogging is still a Poisson process even for immersed grains. Per Thomas and Durian [Phys. Rev. Lett. 114, 178001 (2015), 10.1103/PhysRevLett.114.178001], this allows for an interpretation of the average discharge mass in terms of the fraction of flow microstates that precede, i.e., that effectively cause, a stable clog to form. Since this fraction is barely altered by water, we conclude that the crucial microscopic variables are the grain positions; grain momenta play only a secondary role in destabilizing weak incipient arches. These insights should aid ongoing efforts to understand the susceptibility of granular hoppers to clogging.

Simulation of Structures Exhibiting Instability Under Thermal-Mechanical Transient Loading

DTIC Science & Technology

2015-08-25

4 2.1.4 Application to half- sine arches...shallow arches ....................................................... 9 2.2.2 Half- sine arches... sine arches, parabolic arches and cylindrical panels. 2.1 Arches with Geometric Imperfections The nonlinear equilibrium and buckling equations are

Reliability and Correlation of Static and Dynamic Foot Arch Measurement in a Healthy Pediatric Population.

PubMed

Scholz, Timo; Zech, Astrid; Wegscheider, Karl; Lezius, Susanne; Braumann, Klaus-Michael; Sehner, Susanne; Hollander, Karsten

2017-09-01

Measurement of the medial longitudinal foot arch in children is a controversial topic, as there are many different methods without a definite standard procedure. The purpose of this study was to 1) investigate intraday and interrater reliability regarding dynamic arch index and static arch height, 2) explore the correlation between both arch indices, and 3) examine the variation of the medial longitudinal arch at two different times of the day. Eighty-six children (mean ± SD age, 8.9 ± 1.9 years) participated in the study. Dynamic footprint data were captured with a pedobarographic platform. For static arch measurements, a specially constructed caliper was used to assess heel-to-toe length and dorsum height. A mixed model was established to determine reliability and variation. Reliability was found to be excellent for the static arch height index in sitting (intraday, 0.90; interrater, 0.80) and standing positions (0.88 and 0.85) and for the dynamic arch index (both 1.00). There was poor correlation between static and dynamic assessment of the medial longitudinal arch (standing dynamic arch index, r = -0.138; sitting dynamic arch index, r = -0.070). Static measurements were found to be significantly influenced by the time of day (P < .001), whereas the dynamic arch index was unchanged (P = .845). This study revealed some further important findings. The static arch height index is influenced by gender (P = .004), whereas dynamic arch index is influenced by side (P = .011) and body mass index (P < .001). Dynamic and static foot measurements are reliable for medial longitudinal foot arch assessment in children. The variation of static arch measurements during the day has to be kept in mind. For clinical purposes, static and dynamic arch data should be interpreted separately.

An experimental palladium-103 seed (OptiSeedexp) in a biocompatible polymer without a gold marker: characterization of dosimetric parameters including the interseed effect.

PubMed

Abboud, F; Scalliet, P; Vynckier, S

2008-12-01

Permanent implantation of 125I (iodine) or 103Pd (palladium) sources is a popular treatment option in the management of early stage prostate cancer. New sources are being developed, some of which are being marketed for different clinical applications. A new technique of adjuvant stereotactic permanent seed breast implant, similar to that used in the treatment of prostate cancer, has been proposed by [N. Jansen et al., Int. J. Radiat. Oncol. Biol. Phys. 67, 1052-1058 (2007)] with encouraging results. The presence of artifacts from the metallic seeds, however, can disturb follow-up imaging. The development of plastic seeds has reduced these artifacts. This paper presents a feasibility study of the advantages of palladium-103 seeds, encapsulated with a biocompatible polymer, for future clinical applications, and on the effect of the gold marker on the dosimetric characteristics of such seeds. Experimental palladium seeds, OptiSeedexp, were manufactured by International Brachytherapy (IBt), Seneffe, Belgium, from a biocompatible polymer, including the marker. Apart from the absence of a gold marker, the studied seed has an identical design to the OptiSeed103 [Phys. Med. Biol. 50, 1493-1504 (2005)]; [Appl. Radiat. Isot. 63, 311-321 (2005)]. Polymer encapsulation was preferred by IBt in order to reduce the quantity of radioactive material needed for a given dose rate and to reduce the anisotropy of the radiation field around the seed. In addition, this design is intended to decrease the interseed effects that can occur as a result of the marker and the encapsulation. Dosimetric measurements were performed using LiF thermoluminescent dosimeters (1 mm3) in solid water phantoms (WT1). Measured data were compared to Monte Carlo simulated data in solid water using the MCNP code, version 4C. Updated cross sections [Med. Phys. 30, 701-711 (2003)] were used. As the measured and calculated data were in agreement, Monte Carlo calculations were then performed in liquid water to obtain relevant dosimetric data as required by TG-43U1 recommendations. Comparison of the results with previous studies of OptiSeed103 [Phys. Med. Biol. 50, 1493-1504 (2005)]; [Appl. Radiat. Isot. 63, 311-321 (2005)], and of InterSource103 [Appl. Radiat. Isot. 57, 805-811 (2002)] showed very good agreement for the dose rate constant and for the radial dose function. With respect to the anisotropy function, the relative dose (anisotropy value relative to 90 degrees) from the polymer seed at a distance of 3 cm was close to unity (105%) at 0 degrees, whereas the relative values for the OptiSeed103 with a gold marker and the titanium-encapsulated InterSource103 seed decreased to 70% and 40%, respectively. The interseed effect from one seed was negligible and in the order of calculation uncertainty, making calculation of the dose rate distribution of the studied seeds, according to TG43U1 recommendations, more accurate and closer to reality. This feasibility study shows that due to the low energy of palladium-103, the negligible interseed effect and the reduced artifacts in postimplant medical imaging, this experimental plastic seed would be a good source for breast brachytherapy. This feasibility study was carried out in collaboration with IBt and will be continued with a study of its visibility in different tissues.

An experimental palladium-103 seed (OptiSeed{sup exp}) in a biocompatible polymer without a gold marker: Characterization of dosimetric parameters including the interseed effect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abboud, F.; Scalliet, P.; Vynckier, S.

Permanent implantation of {sup 125}I (iodine) or {sup 103}Pd (palladium) sources is a popular treatment option in the management of early stage prostate cancer. New sources are being developed, some of which are being marketed for different clinical applications. A new technique of adjuvant stereotactic permanent seed breast implant, similar to that used in the treatment of prostate cancer, has been proposed by [N. Jansen et al., Int. J. Radiat. Oncol. Biol. Phys. 67, 1052-1058 (2007)] with encouraging results. The presence of artifacts from the metallic seeds, however, can disturb follow-up imaging. The development of plastic seeds has reduced thesemore » artifacts. This paper presents a feasibility study of the advantages of palladium-103 seeds, encapsulated with a biocompatible polymer, for future clinical applications, and on the effect of the gold marker on the dosimetric characteristics of such seeds. Experimental palladium seeds, OptiSeed{sup exp}, were manufactured by International Brachytherapy (IBt), Seneffe, Belgium, from a biocompatible polymer, including the marker. Apart from the absence of a gold marker, the studied seed has an identical design to the OptiSeed{sup 103}[Phys. Med. Biol. 50, 1493-1504 (2005)]; [Appl. Radiat. Isot. 63, 311-321 (2005)]. Polymer encapsulation was preferred by IBt in order to reduce the quantity of radioactive material needed for a given dose rate and to reduce the anisotropy of the radiation field around the seed. In addition, this design is intended to decrease the interseed effects that can occur as a result of the marker and the encapsulation. Dosimetric measurements were performed using LiF thermoluminescent dosimeters (1 mm{sup 3}) in solid water phantoms (WT1). Measured data were compared to Monte Carlo simulated data in solid water using the MCNP code, version 4C. Updated cross sections [Med. Phys. 30, 701-711 (2003)] were used. As the measured and calculated data were in agreement, Monte Carlo calculations were then performed in liquid water to obtain relevant dosimetric data as required by TG-43U1 recommendations. Comparison of the results with previous studies of OptiSeed{sup 103}[Phys. Med. Biol. 50, 1493-1504 (2005)]; [Appl. Radiat. Isot. 63, 311-321 (2005)], and of InterSource{sup 103}[Appl. Radiat. Isot. 57, 805-811 (2002)] showed very good agreement for the dose rate constant and for the radial dose function. With respect to the anisotropy function, the relative dose (anisotropy value relative to 90 degree sign ) from the polymer seed at a distance of 3 cm was close to unity (105%) at 0 degree sign , whereas the relative values for the OptiSeed{sup 103} with a gold marker and the titanium-encapsulated InterSource{sup 103} seed decreased to 70% and 40%, respectively. The interseed effect from one seed was negligible and in the order of calculation uncertainty, making calculation of the dose rate distribution of the studied seeds, according to TG43U1 recommendations, more accurate and closer to reality. This feasibility study shows that due to the low energy of palladium-103, the negligible interseed effect and the reduced artifacts in postimplant medical imaging, this experimental plastic seed would be a good source for breast brachytherapy. This feasibility study was carried out in collaboration with IBt and will be continued with a study of its visibility in different tissues.« less

Towards a quantitative, measurement-based estimate of the uncertainty in photon mass attenuation coefficients at radiation therapy energies

NASA Astrophysics Data System (ADS)

Ali, E. S. M.; Spencer, B.; McEwen, M. R.; Rogers, D. W. O.

2015-02-01

In this study, a quantitative estimate is derived for the uncertainty in the XCOM photon mass attenuation coefficients in the energy range of interest to external beam radiation therapy—i.e. 100 keV (orthovoltage) to 25 MeV—using direct comparisons of experimental data against Monte Carlo models and theoretical XCOM data. Two independent datasets are used. The first dataset is from our recent transmission measurements and the corresponding EGSnrc calculations (Ali et al 2012 Med. Phys. 39 5990-6003) for 10-30 MV photon beams from the research linac at the National Research Council Canada. The attenuators are graphite and lead, with a total of 140 data points and an experimental uncertainty of ˜0.5% (k = 1). An optimum energy-independent cross section scaling factor that minimizes the discrepancies between measurements and calculations is used to deduce cross section uncertainty. The second dataset is from the aggregate of cross section measurements in the literature for graphite and lead (49 experiments, 288 data points). The dataset is compared to the sum of the XCOM data plus the IAEA photonuclear data. Again, an optimum energy-independent cross section scaling factor is used to deduce the cross section uncertainty. Using the average result from the two datasets, the energy-independent cross section uncertainty estimate is 0.5% (68% confidence) and 0.7% (95% confidence). The potential for energy-dependent errors is discussed. Photon cross section uncertainty is shown to be smaller than the current qualitative ‘envelope of uncertainty’ of the order of 1-2%, as given by Hubbell (1999 Phys. Med. Biol 44 R1-22).

On charged particle equilibrium violation in external photon fields.

PubMed

Bouchard, Hugo; Seuntjens, Jan; Palmans, Hugo

2012-03-01

In a recent paper by Bouchard et al. [Med. Phys. 36(10), 4654-4663 (2009)], a theoretical model of quality correction factors for idealistic so-called plan-class specific reference (PCSR) fields was proposed. The reasoning was founded on the definition of PCSR fields made earlier by Alfonso et al. [Med. Phys. 35(11), 5179-5186 (2008)], requiring the beam to achieve charged particle equilibrium (CPE), in a time-averaged sense, in the reference medium. The relation obtained by Bouchard et al. was derived using Fano's theorem (1954) which states that if CPE is established in a given medium, the dose is independent of point-to-point density variations. A potential misconception on the achievability of the condition required by Fano (1954) might be responsible for false practical conclusions, both in the definition of PCSR fields as well as the theoretical model of quality correction factor. In this paper, the practical achievability of CPE in external beams is treated in detail. The fact that this condition is not achievable in single or composite deliveries is illustrated by an intuitive method and is also formally demonstrated. Fano's theorem is not applicable in external beam radiation dosimetry without (virtually) removing attenuation effects, and therefore, the relation conditionally defined by Bouchard et al. (2009) cannot be valid in practice. A definition of PCSR fields in the recent formalism for nonstandard beams proposed by Alfonso et al. (2008) should be modified, revising the criterion of CPE condition. The authors propose reconsidering the terminology used to describe standard and nonstandard beams. The authors argue that quality correction factors of intensity modulated radiation therapy PCSR fields (i.e., k(Q(pcsr),Q) (f(pcsr),f(ref) )) could be unity under ideal conditions, but it is concluded that further investigation is necessary to confirm that hypothesis.

Sex determination from calcification of costal cartilages in a Scottish sample.

PubMed

Middleham, Helen P; Boyd, Laura E; Mcdonald, Stuart W

2015-10-01

The pelvic bones and skull are not always available when human remains are discovered in a forensic setting. This study investigates the suitability to a Scottish sample of existing methods of sexing based on calcification patterns in the costal cartilages. Radiographs of chest plates of 41 cadavers, 22 male and 19 female aged 57-96 years were analyzed for their calcification patterns according to the methods of McCormick et al. (1985, Am. J. Phys. Anthropol. 68:173-195) and Rejtarova et al. (2004, Biomed. Pap. Med. Fac. Univ. Palacky. Olomouc. Czech. Repub. 148:241-243). With the method of Rejtarova et al. (2004, Biomed. Pap. Med. Fac. Univ. Palacky. Olomouc. Czech. Repub. 148:241-243) none of the male specimens was sexed correctly. Of the chest plates that were suitable for sexing, the method of McCormick et al. (1985, Am. J. Phys. Anthropol. 68:173-195) correctly sexed 82.4% of the female specimens but only 41.2% of the males. To improve the reliability, we suggest a new method of sex determination based on whether the calcified deposits in the second to seventh costal cartilages are predominantly trabecular bone or sclerotic calcified deposits. Specimens with minimal amounts or similar amounts of trabecular bone or sclerotic deposits in the costal cartilages are not appropriate for our method. When such specimens (10 specimens) were excluded, our method correctly sexed 16 of 17 (94%) males and 12 of 14 (86%) females. The authors acknowledge that their sample is small and that many of their subjects were elderly and that the method should be tested on a larger sample group before application in a forensic context. © 2014 Wiley Periodicals, Inc.

A comparative study of inter-abutment distance of dies made from full arch dual-arch impression trays with those made from full arch stock trays: an in vitro study.

PubMed

Reddy, Jagan Mohan; Prashanti, E; Kumar, G Vinay; Suresh Sajjan, M C; Mathew, Xavier

2009-01-01

The dual-arch impression technique is convenient in that it makes the required maxillary and mandibular impressions, as well as the inter-occlusal record in one procedure. The accuracy of inter-abutment distance in dies fabricated from dual-arch impression technique remains in question because there is little information available in the literature. This study was conducted to evaluate the accuracy of inter-abutment distance in dies obtained from full arch dual-arch trays with those obtained from full arch stock metal trays. The metal dual-arch trays showed better accuracy followed by the plastic dual-arch and stock dentulous trays, respectively, though statistically insignificant. The pouring sequence did not have any effect on the inter-abutment distance statistically, though pouring the non-working side of the dual-arch impression first showed better accuracy.

Comparative study on the mechanical mechanism of confined concrete supporting arches in underground engineering.

PubMed

Lv, Zhijin; Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang

2018-01-01

In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch's bearing capability is 1286.9 kN, and the CCC arch's ultimate bearing capability is 1072.4kN. Thus, the SQCC arch's bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and non-uniform load on the supporting arches. The research results could provide a theoretical basis for the design of confined concrete support in underground engineering.

Increased medial longitudinal arch mobility, lower extremity kinematics, and ground reaction forces in high-arched runners.

PubMed

Williams, D S Blaise; Tierney, Robin N; Butler, Robert J

2014-01-01

Runners with high medial longitudinal arch structure demonstrate unique kinematics and kinetics that may lead to running injuries. The mobility of the midfoot as measured by the change in arch height is also suspected to play a role in lower extremity function during running. The effect of arch mobility in high-arched runners is an important factor in prescribing footwear, training, and rehabilitating the running athlete after injury. To examine the effect of medial longitudinal arch mobility on running kinematics, ground reaction forces, and loading rates in high-arched runners. Cross-sectional study. Human movement research laboratory. A total of 104 runners were screened for arch height. Runners were then identified as having high arches if the arch height index was greater than 0.5 SD above the mean. Of the runners with high arches, 11 rigid runners with the lowest arch mobility (R) were compared with 8 mobile runners with the highest arch mobility (M). Arch mobility was determined by calculating the left arch height index in all runners. Three-dimensional motion analysis of running over ground. Rearfoot and tibial angular excursions, eversion-to-tibial internal-rotation ratio, vertical ground reaction forces, and the associated loading rates. Runners with mobile arches exhibited decreased tibial internal-rotation excursion (mobile: 5.6° ± 2.3° versus rigid: 8.0° ± 3.0°), greater eversion-to-tibial internal-rotation ratio (mobile: 2.1 ± 0.8 versus rigid: 1.5 ± 0.5), decreased second peak vertical ground reaction force values (mobile: 2.3 ± 0.2 × body weight versus rigid: 2.4 ± 0.1 × body weight), and decreased vertical loading rate values (mobile: 55.7 ± 14.1 × body weight/s versus rigid: 65.9 ± 11.4 × body weight/s). Based on the results of this study, it appears that runners with high arch structure but differing arch mobility exhibited differences in select lower extremity movement patterns and forces. Future authors should investigate the impact of arch mobility on running-related injuries.

ArchE - An Architecture Design Assistant

DTIC Science & Technology

2007-08-02

Architecture Design Assistant Len Bass August 2, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...ArchE - An Architecture Design Assistant 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...X, Module X 3 Author / Presenter, Date if Needed What is ArchE? ArchE is a software architecture design assistant, which: • Takes quality and

[Clinical effect of removable lingual arch plus auxiliary spring for dental arch expansion].

PubMed

Sun, Feng-yang; Zhang, Yu

2007-04-01

Observe the clinical effect of removable lingual arch plus auxiliary spring for convenient dental (especially mandibular) arch expansion. Seventeen patients with dental arch constriction complicated by mild dental crowding were enrolled in this study, including 9 requiring maxillary arch expansion and 8 necessitating mandibular expansion. The patients were divided to two groups at random for arch expansion with removable lingual arch plus auxiliary spring and with Quad-helix, respectively, and the effect of arch expansion was compared between the two groups. After 8 weeks of arch expansion, the average width of U4-U4 and U5-U5 in removable lingual arch group was enlarged by 2.2 mm and 3.0 mm, and that in Quad-helix group by 2.3 mm and 3.5 mm, respectively, showing no significant differences between the two groups (P>0.05). After 12 weeks of treatment, the average width of L4-L4 and L5-L5 in the former group was enlarged by 2.3 mm and 2.5 mm, respectively, significantly greater than that in the latter group (1.0 mm and 1.2 mm, P<0.05). Removable lingual arch plus auxiliary spring allows significant expansion of the middle segment of the dental arch (bicuspids), and can be more effective than Quad-helix for mandibular arch expansion.

Is the shortened dental arch still a satisfactory option?

PubMed

Manola, M; Hussain, F; Millar, B J

2017-07-21

Aims Dental practitioners may hold the view that missing posterior teeth should be replaced to ensure a healthy masticatory system and satisfactory oral function. However, the shortened dental arch (SDA) concept is still in use, but after 35 years is it acceptable? This review searches the literature for the evidence and opinions regarding the suitability of the SDA as a current treatment modality.Methods Medline and PubMed databases were searched for relevant terms, all the abstracts were assessed and articles selected according to the pre-set exclusion and inclusion criteria.Results The search yielded 1,895 articles and after the assessment of the abstracts and application of the exclusion and inclusion criteria, 44 articles were selected for this review. These included 11 cohort studies, two longitudinal studies, two animal studies, three cross sectional studies, eight clinical studies and 18 case control studies. There appears to be a trend over the past three decades for more papers to be opposed to the SDA concept.Conclusion Evidence that the SDA causes pathology is lacking. Clinicians, healthcare authorities and patients have shown favourable attitudes towards the SDA and this continues, although there is an increase in studies opposing the concept and some are dissatisfied with this option. The concept remains viable particularly for the medically compromised patient or where restorations are considered unsuitable but further more specific studies are warranted.

The effect of foot arch on plantar pressure distribution during standing.

PubMed

Periyasamy, R; Anand, Sneh

2013-07-01

The aim of this study was to explore how foot type affects plantar pressure distribution during standing. In this study, 32 healthy subjects voluntarily participated and the subject feet were classified as: normal feet (n = 23), flat feet (n = 14) and high arch feet (n = 27) according to arch index (AI) values obtained from foot pressure intensity image analysis. Foot pressure intensity images were acquired by a pedopowergraph system to obtain a foot pressure distribution parameter-power ratio (PR) during standing in eight different regions of the foot. Contact area and mean PR were analysed in hind foot, mid-foot and fore foot regions. One-way analysis of variance was used to determine statistical differences between groups. The contact area and mean PR value beneath the mid-foot was significantly increased in the low arch foot when compared to the normal arch foot and high arch foot (p < 0.001) in both feet. However, subjects with low-arch feet had significantly higher body mass index (BMI) compared to subjects with high-arch feet (p < 0.05) and subjects with normal arch feet (p < 0.05) in both feet. In addition, subjects with low-arch feet had significant differences in arch index (AI) value as compared to subjects with high-arch feet (p < 0.001) and subjects with normal arch feet (p < 0.05) in both feet. Mean mid-foot PR value were positively (r = 0.54) correlated with increased arch index (AI) value. A significant (p < 0.05) change was obtained in PR value beneath the mid-foot of low arch feet when compared with other groups in both feet. The findings suggest that there is an increased mid-foot PR value in the low arch foot as compared to the normal arch foot and high arch foot during standing. Therefore, individuals with low arch feet could be at high risk for mid-foot collapse and Charcot foot problems, indicating that foot type should be assessed when determining an individual's risk for foot injury.

Motion planning and synchronized control of the dental arch generator of the tooth-arrangement robot.

PubMed

Jiang, Jin-Gang; Zhang, Yong-De

2013-03-01

The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.

Frontal plane multi-segment foot kinematics in high- and low-arched females during dynamic loading tasks.

PubMed

Powell, Douglas W; Long, Benjamin; Milner, Clare E; Zhang, Songning

2011-02-01

The functions of the medial longitudinal arch have been the focus of much research in recent years. Several studies have shown kinematic differences between high- and low-arched runners. No literature currently compares the inter-segmental foot motion of high- and low-arched recreational athletes. The purpose of this study was to examine inter-segmental foot motion in the frontal plane during dynamic loading activities in high- and low-arched female athletes. Inter-segmental foot motions were examined in 10 high- and 10 low-arched female recreational athletes. Subjects performed five barefooted trials in each of the following randomized movements: walking, running, downward stepping and landing. Three-dimensional kinematic data were recorded. High-arched athletes had smaller peak ankle eversion angles in walking, running and downward stepping than low-arched athletes. At the rear-midfoot joint high-arched athletes reached peak eversion later in walking and downward stepping than the low-arched athletes. The high-arched athletes had smaller peak mid-forefoot eversion angles in walking, running and downward stepping than the low-arched athletes. The current findings show that differences in foot kinematics between the high- and low-arched athletes were in position and not range of motion within the foot. Copyright © 2010 Elsevier B.V. All rights reserved.

[Dental arch form reverting by four-point method].

PubMed

Pan, Xiao-Gang; Qian, Yu-Fen; Weng, Si-En; Feng, Qi-Ping; Yu, Quan

2008-04-01

To explore a simple method of reverting individual dental arch form template for wire bending. Individual dental arch form was reverted by four-point method. By defining central point of bracket on bilateral lower second premolar and first molar, certain individual dental arch form could be generated. The arch form generating procedure was then be developed to computer software for printing arch form. Four-point method arch form was evaluated by comparing with direct model measurement on linear and angular parameters. The accuracy and reproducibility were assessed by paired t test and concordance correlation coefficient with Medcalc 9.3 software package. The arch form by four-point method was of good accuracy and reproducibility (linear concordance correlation coefficient was 0.9909 and angular concordance correlation coefficient was 0.8419). The dental arch form reverted by four-point method could reproduce the individual dental arch form.

Photoinduced Partial Unfolding of Tubulin Bound to Meso-tetrakis(sulfonatophenyl) Porphyrin Leads to Inhibition of Microtubule Formation In Vitro

DTIC Science & Technology

2013-07-30

H. Nettles, B . Cornett, K . H. Downing, and E. Nogales, Proc. Natl. Acad. Sci. 98, 5312–5316 (2001). B . McMicken et al.: Photoinduced unfolding of...and R. K . Pandey, Chem Soc Rev. 40, 340–362 (2011). [23] B . C. Wilson and M. S. Patterson, Phys Med Biol. 53, R61–R109 (2008). [24] E. D. Sternberg, D... K . Subbarao and R. C. MacDonald, Analyst 118, 913–916 (1993). [30] F. V. Bright and C. Munson, Anal. Chim. Acta 500, 71–104 (2003). [31] Z. Li, T. Lu

Chemical reaction and dust formation studies in laboratory hydrocarbon plasmas.

NASA Astrophysics Data System (ADS)

Hippler, Rainer; Majumdar, Abhijit; Thejaswini, H. C.

Plasma chemical reaction studies with relevance to, e.g., Titan's atmosphere have been per-formed in various laboratory plasmas [1,2]. Chemical reactions in a dielectric barrier discharge at medium pressure of 250-300 mbar have been studied in CH4 /N2 and CH4 /Ar gas mixtures by means of mass spectrometry. The main reaction scheme is production of H2 by fragmenta-tion of CH4 , but also production of larger hydrocarbons like Cn Hm with n up to 10 including formation of different functional CN groups is observed. [1] A. Majumdar and R. Hippler, Development of dielectric barrier discharge plasma processing apparatus for mass spectrometry and thin film deposition, Rev. Sci. Instrum. 78, 075103 (2007) [2] H.T. Do, G. Thieme, M. Frühlich, H. Kersten, and R. Hippler, Ion Molecule and Dust Particle Formation in Ar/CH4 , Ar/C2 H2 and Ar/C3 H6 Radio-frequency Plasmas, Contrib. Plasma Phys. 45, No. 5-6, 378-384 (2005)

Experimental Verification of the Kruskal-Shafranov Stability Limit in Line-Tied Partial Toroidal Plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oz, E.; Myers, C. E.; Yamada, M.

2011-07-19

The stability properties of partial toroidal flux ropes are studied in detail in the laboratory, motivated by ubiquitous arched magnetic structures found on the solar surface. The flux ropes studied here are magnetized arc discharges formed between two electrodes in the Magnetic Reconnection Experiment (MRX) [Yamada et al., Phys. Plasmas, 4, 1936 (1997)]. The three dimensional evolution of these flux ropes is monitored by a fast visible light framing camera, while their magnetic structure is measured by a variety of internal magnetic probes. The flux ropes are consistently observed to undergo large-scale oscillations as a result of an external kinkmore » instability. Using detailed scans of the plasma current, the guide field strength, and the length of the flux rope, we show that the threshold for kink stability is governed by the Kruskal-Shafranov limit for a flux rope that is held fixed at both ends (i.e., qa = 1).« less

Experimental verification of the Kruskal-Shafranov stability limit in line-tied partial-toroidal plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oz, E.; Myers, C. E.; Yamada, M.

2011-10-15

The stability properties of partial-toroidal flux ropes are studied in detail in the laboratory, motivated by ubiquitous arched magnetic structures found on the solar surface. The flux ropes studied here are magnetized arc discharges formed between two electrodes in the Magnetic Reconnection Experiment (MRX) [Yamada et al., Phys. Plasmas 4, 1936 (1997)]. The three dimensional evolution of these flux ropes is monitored by a fast visible light framing camera, while their magnetic structure is measured by a variety of internal magnetic probes. The flux ropes are consistently observed to undergo large-scale oscillations as a result of an external kink instability.more » Using detailed scans of the plasma current, the guide field strength, and the length of the flux rope, we show that the threshold for kink stability is governed by the Kruskal-Shafranov limit for a flux rope that is held fixed at both ends (i.e., q{sub a} = 1).« less

A Meta-Analysis of Total Arch Replacement With Frozen Elephant Trunk in Acute Type A Aortic Dissection.

PubMed

Takagi, Hisato; Umemoto, Takuya

2016-01-01

To assess the safety and efficacy, we performed a meta-analysis of total arch replacement with frozen elephant trunk in exclusive acute type A (neither chronic nor type B) aortic dissection. Databases including MEDLINE and EMBASE were searched through March 2015 using Web-based search engines (PubMed and OVID). Eligible studies were case series of frozen elephant trunk enrolling patients with acute type A (neither chronic nor type B) aortic dissection reporting at least early (in-hospital or 30-day) all-cause mortality. Study-specific estimates were combined in both fixed- and random-effect models. Fifteen studies enrolling 1279 patients were identified and included. Pooled analyses demonstrated the cardiopulmonary bypass time of 207.1 (95% confidence interval [CI], 186.1-228.1) minutes, aortic cross-clamp time of 123.3 (95% CI, 113.1-133.5) minutes, selective antegrade cerebral perfusion time of 49.3 (95% CI, 37.6-61.0) minutes, hypothermic circulatory arrest time of 39.0 (95% CI, 30.7-47.2) minutes, early mortality of 9.2% (95% CI, 7.7-11.0%), stroke of 4.8% (95% CI, 2.5-9.0%), spinal cord injury of 3.5% (95% CI, 1.9-6.6%), mid- to long-term (≥1-year) overall mortality of 13.0% (95% CI, 10.4-16.0%), reintervention of 9.6% (95% CI, 5.6-15.8%), and false lumen thrombosis of 96.8% (95% CI, 90.7-98.9%). Total arch replacement with frozen elephant trunk provides a safe alternative to that with conventional elephant trunk in patients with acute type A aortic dissection, with acceptable early mortality and morbidity. The rates of mid- to long-term reintervention and false lumen non-thrombosis may be lower in patients undergoing the frozen than conventional elephant trunk procedure. © The Author(s) 2016.

Comparative study on the mechanical mechanism of confined concrete supporting arches in underground engineering

PubMed Central

Qin, Qian; Jiang, Bei; Luan, Yingcheng; Yu, Hengchang

2018-01-01

In order to solve the supporting problem in underground engineering with high stress, square steel confined concrete (SQCC) supporting method is adopted to enhance the control on surrounding rocks, and the control effect is remarkable. The commonly used cross section shapes of confined concrete arch are square and circular. At present, designers have no consensus on which kind is more proper. To search for the answer, this paper makes an analysis on the mechanical properties of the two shapes of the cross-sections. A full-scale indoor comparative test was carried out on the commonly used straight-wall semi-circular SQCC arch and circular steel confined concrete arch (CCC arch). This test is based on self-developed full-scale test system for confined concrete arch. Our research, combining with the numerical analysis, shows: (1) SQCC arch is consistent with CCC arch in the deformation and failure mode. The largest damages parts are at the legs of both of them. (2) The SQCC arch’s bearing capability is 1286.9 kN, and the CCC arch’s ultimate bearing capability is 1072.4kN. Thus, the SQCC arch’s bearing capability is 1.2 times that of the CCC arch. (3) The arches are subjected to combined compression and bending, bending moment is the main reason for the arch failure. The section moment of inertia of SQCC arch is 1.26 times of that of CCC arch, and the former is better than the latter in bending performance. The ultimate bearing capacity is positively correlated with the size of the moment of inertia. Based on the above research, the engineering suggestions are as follows: (1) To improve the bearing capacity of the arch, the cross-sectional shape of the chamber should be optimized and the arch bearing mode changed accordingly. (2) The key damaged positions, such as the arch leg, should be reinforced, optimizing the state of force on the arch. SQCC arches should be used for supporting in underground engineering, which is under stronger influence of the bending moment and non-uniform load on the supporting arches. The research results could provide a theoretical basis for the design of confined concrete support in underground engineering. PMID:29447187

Runner's knowledge of their foot type: do they really know?

PubMed

Hohmann, Erik; Reaburn, Peter; Imhoff, Andreas

2012-09-01

The use of correct individually selected running shoes may reduce the incidence of running injuries. However, the runner needs to be aware of their foot anatomy to ensure the "correct" footwear is chosen. The purpose of this study was to compare the individual runner's knowledge of their arch type to the arch index derived from a static footprint. We examined 92 recreational runners with a mean age of 35.4±11.4 (12-63) years. A questionnaire was used to investigate the knowledge of the runners about arch height and overpronation. A clinical examination was undertaken using defined criteria and the arch index was analysed using weight-bearing footprints. Forty-five runners (49%) identified their foot arch correctly. Eighteen of the 41 flat-arched runners (44%) identified their arch correctly. Twenty-four of the 48 normal-arched athletes (50%) identified their arch correctly. Three subjects with a high arch identified their arch correctly. Thirty-eight runners assessed themselves as overpronators; only four (11%) of these athletes were positively identified. Of the 34 athletes who did not categorize themselves as overpronators, four runners (12%) had clinical overpronation. The findings of this research suggest that runners possess poor knowledge of both their foot arch and dynamic pronation. Copyright © 2012 Elsevier Ltd. All rights reserved.

A geometric reappraisal of proximal landing zones for thoracic endovascular aortic repair according to aortic arch types.

PubMed

Marrocco-Trischitta, Massimiliano M; de Beaufort, Hector W; Secchi, Francesco; van Bakel, Theodorus M; Ranucci, Marco; van Herwaarden, Joost A; Moll, Frans L; Trimarchi, Santi

2017-06-01

This study assessed whether the additional use of the aortic arch classification in type I, II, and III may complement Ishimaru's aortic arch map and provide valuable information on the geometry and suitability of proximal landing zones for thoracic endovascular aortic repair. Anonymized thoracic computed tomography scans of healthy aortas were reviewed and stratified according to the aortic arch classification, and 20 of each type of arch were selected. Further processing allowed calculation of angulation and tortuosity of each proximal landing zone. Data were described indicating both proximal landing zone and type of arch (eg, 0/I). Angulation was severe (>60°) in 2/III and in 3/III. Comparisons among the types of arch showed an increase in proximal landing zones angulation (P < .001) and tortuosity (P = .009) depending on the type of arch. Comparisons within type of arch showed no change in angulation and tortuosity across proximal landing zones within type I arch (P = .349 and P = .409), and increases in angulation and tortuosity toward more distal proximal landing zones within type II (P = .003 and P = .043) and type III (P < .001 in both). The aortic arch classification is associated with a consistent geometric pattern of the aortic arch map, which identifies specific proximal landing zones with suboptimal angulation for stent graft deployment. Arches II and III also appear to have progressively less favorable anatomy for thoracic endovascular aortic repair compared with arch I. Copyright © 2016 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

TH-A-BRC-00: New Task Groups for External Beam QA: An Overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2016-06-15

AAPM TG-135U1 QA for Robotic Radiosurgery - Sonja Dieterich Since the publication of AAPM TG-135 in 2011, the technology of robotic radiosurgery has rapidly developed. AAPM TG-135U1 will provide recommendations on the clinical practice for using the IRIS collimator, fiducial-less real-time motion tracking, and Monte Carlo based treatment planning. In addition, it will summarize currently available literature about uncertainties. Learning Objectives: Understand the progression of technology since the first TG publication Learn which new QA procedures should be implemented for new technologies Be familiar with updates to clinical practice guidelines AAPM TG-178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance -more » Steven Goetsch Purpose: AAPM Task Group 178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance was formed in August, 2008. The Task Group has 12 medical physicists, two physicians and two consultants. Methods: A round robin dosimetry intercomparison of proposed ionization chambers, electrometer and dosimetry phantoms was conducted over a 15 month period in 2011 and 2012 (Med Phys 42, 11, Nov, 2015). The data obtained at 9 institutions (with ten different Elekta Gamma Knife units) was analyzed by the lead author using several protocols. Results: The most consistent results were obtained using the Elekta ABS 16cm diameter phantom, with the TG-51 protocol modified as recommended by Alfonso et al (Med Phys 35, 11, Nov 2008). A key white paper (Med Phys, in press) sponsored by Elekta Corporation, was used to obtain correction factors for the ionization chambers and phantoms used in this intercomparison. Consistent results were obtained for both Elekta Gamma Knife Model 4C and Gamma Knife Perfexion units as measured with each of two miniature ionization chambers. Conclusion: The full report gives clinical history and background of gamma stereotactic radiosurgery, clinical examples and history, quality assurance recommendations and outline of possible dosimetry protocols. The report will be reviewed by the AAPM Working Group on Recommendations for Radiotherapy External Beam Quality Assurance and then by the AAPM Science Council before publication in Medical Physics Survey of possible calibration protocols for calibration of Gamma Stereotactic Radiosurgery (GSR) devices Overview of modern Quality Assurance techniques for GSR AAPM TG-218 Tolerance Levels and Methodologies for IMRT Verification QA - Moyed Miften Patient-specific IMRT QA measurement is a process designed to identify discrepancies between calculated and delivered doses. Error tolerance limits are not well-defined or consistently applied across centers. The AAPM TG-218 report has been prepared to improve the understanding and consistency of this process by providing recommendations for methodologies and tolerance limits in patient-specific IMRT QA. Learning Objectives: Review measurement methods and methodologies for absolute dose verification Provide recommendations on delivery methods, data interpretation, the use of analysis routines and choice of tolerance limits for IMRT QA Sonja Dieterich has a research agreement with Sun Nuclear Inc. Steven Goetsch is a part-time consultant for Elekta.« less

TH-A-BRC-03: AAPM TG218: Measurement Methods and Tolerance Levels for Patient-Specific IMRT Verification QA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miften, M.

2016-06-15

AAPM TG-135U1 QA for Robotic Radiosurgery - Sonja Dieterich Since the publication of AAPM TG-135 in 2011, the technology of robotic radiosurgery has rapidly developed. AAPM TG-135U1 will provide recommendations on the clinical practice for using the IRIS collimator, fiducial-less real-time motion tracking, and Monte Carlo based treatment planning. In addition, it will summarize currently available literature about uncertainties. Learning Objectives: Understand the progression of technology since the first TG publication Learn which new QA procedures should be implemented for new technologies Be familiar with updates to clinical practice guidelines AAPM TG-178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance -more » Steven Goetsch Purpose: AAPM Task Group 178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance was formed in August, 2008. The Task Group has 12 medical physicists, two physicians and two consultants. Methods: A round robin dosimetry intercomparison of proposed ionization chambers, electrometer and dosimetry phantoms was conducted over a 15 month period in 2011 and 2012 (Med Phys 42, 11, Nov, 2015). The data obtained at 9 institutions (with ten different Elekta Gamma Knife units) was analyzed by the lead author using several protocols. Results: The most consistent results were obtained using the Elekta ABS 16cm diameter phantom, with the TG-51 protocol modified as recommended by Alfonso et al (Med Phys 35, 11, Nov 2008). A key white paper (Med Phys, in press) sponsored by Elekta Corporation, was used to obtain correction factors for the ionization chambers and phantoms used in this intercomparison. Consistent results were obtained for both Elekta Gamma Knife Model 4C and Gamma Knife Perfexion units as measured with each of two miniature ionization chambers. Conclusion: The full report gives clinical history and background of gamma stereotactic radiosurgery, clinical examples and history, quality assurance recommendations and outline of possible dosimetry protocols. The report will be reviewed by the AAPM Working Group on Recommendations for Radiotherapy External Beam Quality Assurance and then by the AAPM Science Council before publication in Medical Physics Survey of possible calibration protocols for calibration of Gamma Stereotactic Radiosurgery (GSR) devices Overview of modern Quality Assurance techniques for GSR AAPM TG-218 Tolerance Levels and Methodologies for IMRT Verification QA - Moyed Miften Patient-specific IMRT QA measurement is a process designed to identify discrepancies between calculated and delivered doses. Error tolerance limits are not well-defined or consistently applied across centers. The AAPM TG-218 report has been prepared to improve the understanding and consistency of this process by providing recommendations for methodologies and tolerance limits in patient-specific IMRT QA. Learning Objectives: Review measurement methods and methodologies for absolute dose verification Provide recommendations on delivery methods, data interpretation, the use of analysis routines and choice of tolerance limits for IMRT QA Sonja Dieterich has a research agreement with Sun Nuclear Inc. Steven Goetsch is a part-time consultant for Elekta.« less

TH-A-BRC-02: AAPM TG-178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetsch, S.

AAPM TG-135U1 QA for Robotic Radiosurgery - Sonja Dieterich Since the publication of AAPM TG-135 in 2011, the technology of robotic radiosurgery has rapidly developed. AAPM TG-135U1 will provide recommendations on the clinical practice for using the IRIS collimator, fiducial-less real-time motion tracking, and Monte Carlo based treatment planning. In addition, it will summarize currently available literature about uncertainties. Learning Objectives: Understand the progression of technology since the first TG publication Learn which new QA procedures should be implemented for new technologies Be familiar with updates to clinical practice guidelines AAPM TG-178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance -more » Steven Goetsch Purpose: AAPM Task Group 178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance was formed in August, 2008. The Task Group has 12 medical physicists, two physicians and two consultants. Methods: A round robin dosimetry intercomparison of proposed ionization chambers, electrometer and dosimetry phantoms was conducted over a 15 month period in 2011 and 2012 (Med Phys 42, 11, Nov, 2015). The data obtained at 9 institutions (with ten different Elekta Gamma Knife units) was analyzed by the lead author using several protocols. Results: The most consistent results were obtained using the Elekta ABS 16cm diameter phantom, with the TG-51 protocol modified as recommended by Alfonso et al (Med Phys 35, 11, Nov 2008). A key white paper (Med Phys, in press) sponsored by Elekta Corporation, was used to obtain correction factors for the ionization chambers and phantoms used in this intercomparison. Consistent results were obtained for both Elekta Gamma Knife Model 4C and Gamma Knife Perfexion units as measured with each of two miniature ionization chambers. Conclusion: The full report gives clinical history and background of gamma stereotactic radiosurgery, clinical examples and history, quality assurance recommendations and outline of possible dosimetry protocols. The report will be reviewed by the AAPM Working Group on Recommendations for Radiotherapy External Beam Quality Assurance and then by the AAPM Science Council before publication in Medical Physics Survey of possible calibration protocols for calibration of Gamma Stereotactic Radiosurgery (GSR) devices Overview of modern Quality Assurance techniques for GSR AAPM TG-218 Tolerance Levels and Methodologies for IMRT Verification QA - Moyed Miften Patient-specific IMRT QA measurement is a process designed to identify discrepancies between calculated and delivered doses. Error tolerance limits are not well-defined or consistently applied across centers. The AAPM TG-218 report has been prepared to improve the understanding and consistency of this process by providing recommendations for methodologies and tolerance limits in patient-specific IMRT QA. Learning Objectives: Review measurement methods and methodologies for absolute dose verification Provide recommendations on delivery methods, data interpretation, the use of analysis routines and choice of tolerance limits for IMRT QA Sonja Dieterich has a research agreement with Sun Nuclear Inc. Steven Goetsch is a part-time consultant for Elekta.« less

TH-A-BRC-01: AAPM TG-135U1 QA for Robotic Radiosurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dieterich, S.

AAPM TG-135U1 QA for Robotic Radiosurgery - Sonja Dieterich Since the publication of AAPM TG-135 in 2011, the technology of robotic radiosurgery has rapidly developed. AAPM TG-135U1 will provide recommendations on the clinical practice for using the IRIS collimator, fiducial-less real-time motion tracking, and Monte Carlo based treatment planning. In addition, it will summarize currently available literature about uncertainties. Learning Objectives: Understand the progression of technology since the first TG publication Learn which new QA procedures should be implemented for new technologies Be familiar with updates to clinical practice guidelines AAPM TG-178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance -more » Steven Goetsch Purpose: AAPM Task Group 178 Gamma Stereotactic Radiosurgery Dosimetry and Quality Assurance was formed in August, 2008. The Task Group has 12 medical physicists, two physicians and two consultants. Methods: A round robin dosimetry intercomparison of proposed ionization chambers, electrometer and dosimetry phantoms was conducted over a 15 month period in 2011 and 2012 (Med Phys 42, 11, Nov, 2015). The data obtained at 9 institutions (with ten different Elekta Gamma Knife units) was analyzed by the lead author using several protocols. Results: The most consistent results were obtained using the Elekta ABS 16cm diameter phantom, with the TG-51 protocol modified as recommended by Alfonso et al (Med Phys 35, 11, Nov 2008). A key white paper (Med Phys, in press) sponsored by Elekta Corporation, was used to obtain correction factors for the ionization chambers and phantoms used in this intercomparison. Consistent results were obtained for both Elekta Gamma Knife Model 4C and Gamma Knife Perfexion units as measured with each of two miniature ionization chambers. Conclusion: The full report gives clinical history and background of gamma stereotactic radiosurgery, clinical examples and history, quality assurance recommendations and outline of possible dosimetry protocols. The report will be reviewed by the AAPM Working Group on Recommendations for Radiotherapy External Beam Quality Assurance and then by the AAPM Science Council before publication in Medical Physics Survey of possible calibration protocols for calibration of Gamma Stereotactic Radiosurgery (GSR) devices Overview of modern Quality Assurance techniques for GSR AAPM TG-218 Tolerance Levels and Methodologies for IMRT Verification QA - Moyed Miften Patient-specific IMRT QA measurement is a process designed to identify discrepancies between calculated and delivered doses. Error tolerance limits are not well-defined or consistently applied across centers. The AAPM TG-218 report has been prepared to improve the understanding and consistency of this process by providing recommendations for methodologies and tolerance limits in patient-specific IMRT QA. Learning Objectives: Review measurement methods and methodologies for absolute dose verification Provide recommendations on delivery methods, data interpretation, the use of analysis routines and choice of tolerance limits for IMRT QA Sonja Dieterich has a research agreement with Sun Nuclear Inc. Steven Goetsch is a part-time consultant for Elekta.« less

The Foot's Arch and the Energetics of Human Locomotion.

PubMed

Stearne, Sarah M; McDonald, Kirsty A; Alderson, Jacqueline A; North, Ian; Oxnard, Charles E; Rubenson, Jonas

2016-01-19

The energy-sparing spring theory of the foot's arch has become central to interpretations of the foot's mechanical function and evolution. Using a novel insole technique that restricted compression of the foot's longitudinal arch, this study provides the first direct evidence that arch compression/recoil during locomotion contributes to lowering energy cost. Restricting arch compression near maximally (~80%) during moderate-speed (2.7 ms(-1)) level running increased metabolic cost by + 6.0% (p < 0.001, d = 0.67; unaffected by foot strike technique). A simple model shows that the metabolic energy saved by the arch is largely explained by the passive-elastic work it supplies that would otherwise be done by active muscle. Both experimental and model data confirm that it is the end-range of arch compression that dictates the energy-saving role of the arch. Restricting arch compression had no effect on the cost of walking or incline running (3°), commensurate with the smaller role of passive-elastic mechanics in these gaits. These findings substantiate the elastic energy-saving role of the longitudinal arch during running, and suggest that arch supports used in some footwear and orthotics may increase the cost of running.

Evaluation of arch form between Vietnamese and North American Caucasians using 3-dimensional virtual models.

PubMed

Trang, Vu Thi Thu; Park, Jae Hyun; Bayome, Mohamed; Shastry, Shruti; Mellion, Alex; Kook, Yoon-Ah

2015-01-01

The purpose of this study was to investigate the three-dimensional (3D) morphologic differences in the mandibular arch of Vietnamese and North American White subjects. The sample included 113 Vietnamese subjects (41 Class I, 37 Class II and 35 Class III) and 96 White subjects (29 Class I, 30 Class II and 37 Class III). The samples were regrouped according to arch form types (tapered, ovoid, and square) to compare the frequency distribution of the three arch forms between ethnic groups in each angle classification. The facial axis point of each tooth was digitized on 3D virtual models. Four linear and two ratio variables were measured. In comparing arch dimensions, the intercanine and intermolar widths were wider in Vietnamese than in Whites (p < 0.001, p = 0.042, respectively). In the White group, there was even frequency distribution of the three arch forms. However, in the Vietnamese group, the square arch form was the most frequent followed by tapered and ovoid arch forms. The arch forms of Whites were narrower than Vietnamese. In North American Whites, the distribution of the arch form types showed similar frequency. In Vietnamese, the square arch form was more frequent.

The biomechanics of zygomatic arch shape

PubMed Central

Smith, Amanda L.; Grosse, Ian R.

2017-01-01

Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. PMID:27870343

Best surgical option for arch extension of type B aortic dissection: the open approach

PubMed Central

Kim, Joon Bum

2014-01-01

Arch extension of aortic dissection (AD) is reported to occur in 4-25% of patients presenting with acute type B AD. The DeBakey and Stanford classifications do not specifically account for this subset, however, recent studies have demonstrated that the prognosis of patients with arch extension in acute type B AD is virtually identical to that of others with type B AD. In this sense, it seems reasonable to extend the general management principles that are applied to classic acute type B AD even to patients with arch extension. This may be because even in patients with arch extension, most complications occur at locations distal to the arch, and therefore treatment of these patients is similar to that of complicated type B AD, namely thoracic endovascular aortic repair (TEVAR). Conversely, 10% of patients with acute type B AD and arch extension develop complications that are directly related to the arch pathology. This clinical scenario generally necessitates surgical arch repair through a sternotomy approach. The frozen elephant trunk technique combined with arch repair is a very reasonable option to treat this unique clinical entity that involves relatively distal locations of the aortic diseases. Combined arch and descending aorta replacement through thoracotomy is an alternative option particularly when the anatomical features of the target lesions are not suitable for a sternotomy approach or TEVAR. Nonetheless, the reported mortality associated with this approach has been exceedingly high. Hybrid arch repair is another consideration in treating these patients to reduce the treatment-related mortality and morbidity, especially when the arch pathology is limited to the distal part. Nevertheless, the safety and efficacy of this procedure in cases with more extensive arch involvement needs to be assessed in further studies in comparison with other treatment modalities. PMID:25133105

A flap based on the plantar digital artery arch branch to improve appearance of reconstructed fingers: Anatomical and clinical application.

PubMed

Tang, Lin-Feng; Ju, Ji-Hui; Liu, Yue-Fei; Lan, Bo; Hou, Rui-Xing

2018-02-01

To investigate blood supply features of the flap based on the plantar digital artery arch and arch branch artery, and the treatment of outcomes of reconstructed fingers by the plantar digital artery arch branch island flap. Eight fresh foot specimens were employed with red emulsion infusion and microdissection. The vascular organization was observed in the second toe, such as initiation site, the course, and the number of the plantar digital artery arch branch. There were 15 fingers of 13 patients (8 males and 5 females) with finger defects accompanied by toe transfer, using the plantar digital artery arch branch flap inserted in the neck of the second toe to correct the appearance defect caused by a narrow "neck" and a bulbous tip. The intact plantar digital arches were identified in all specimens. The plantar digital artery arch had 5 branches. The range of external diameter of the arch branch was 0.4-0.6 mm. All the plantar digital artery arch branch island flaps and the reconstructed fingers survived. These cases were conducted with a follow-up period for 3-18 months (average, 9 months). All the plantar digital artery arch branch island flaps and reconstructed fingers demonstrated a satisfactory appearance and favorable sense function. The reconstructed finger-tip characteristic was good, with no obvious scar hyperplasia. The range of flexion and extension of reconstructed fingers was favorable as well. The plantar digital artery arch and arch branch artery possess regular vasa vasorum and abundant vascularity. A flap based on the plantar digital artery arch branch is an ideal selection for plastic surgery of reconstructed fingers. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Heritability estimates of dental arch parameters in Lithuanian twins.

PubMed

Švalkauskienė, Vilma; Šmigelskas, Kastytis; Šalomskienė, Loreta; Andriuškevičiūtė, Irena; Šalomskienė, Aurelija; Vasiliauskas, Arūnas; Šidlauskas, Antanas

2015-01-01

The genetic influence on dental arch morphology may be country-specific, thus it is reasonable to check the estimates of genetics across different populations. The purpose of this study was to evaluate the heredity of dental arch morphology in the sample of Lithuanian twins with accurate zygosity determination. The study sample consisted of digital dental models of 40 monozygotic (MZ) and 32 dizygotic (DZ) twin pairs. The estimates of heritability (h(2)) for dental arch breadth and length were calculated. All dental arch breadths and lengths were statistically significantly larger in men than in women. Arch length differences between genders were less expressed than largest breadth differences. In the upper jaw the largest genetic effect was found on the arch breadth between lateral incisors. The heritability of dental arch length demonstrated similar differences between upper and lower jaw with mandible dental arch length being more genetically determined. The largest genetic impact was found on the upper dental arch breadth between lateral incisors. Similar, but lower heritability is inherent for canines and first premolars of the upper jaw and first premolars of the lower jaw. It also can be noted, that arch breadths between posterior teeth show lower heritability estimates than between anterior teeth on both jaws. The dental arch in the upper jaw has more expressed genetic component than in the lower jaw.

Arch index and running biomechanics in children aged 10-14 years.

PubMed

Hollander, Karsten; Stebbins, Julie; Albertsen, Inke Marie; Hamacher, Daniel; Babin, Kornelia; Hacke, Claudia; Zech, Astrid

2018-03-01

While altered foot arch characteristics (high or low) are frequently assumed to influence lower limb biomechanics and are suspected to be a contributing factor for injuries, the association between arch characteristics and lower limb running biomechanics in children is unclear. Therefore, the aim of this study was to investigate the relationship between a dynamically measured arch index and running biomechanics in healthy children. One hundred and one children aged 10-14 years were included in this study and underwent a biomechanical investigation. Plantar distribution (Novel, Emed) was used to determine the dynamic arch index and 3D motion capture (Vicon) to measure running biomechanics. Linear mixed models were established to determine the association between dynamic arch index and foot strike patterns, running kinematics, kinetics and temporal-spatial outcomes. No association was found between dynamic arch index and rate of rearfoot strikes (p = 0.072). Of all secondary outcomes, only the foot progression angle was associated with the dynamic arch index (p = 0.032) with greater external rotation in lower arched children. Overall, we found only few associations between arch characteristics and running biomechanics in children. However, altered foot arch characteristics are of clinical interest. Future studies should focus on detailed foot biomechanics and include clinically diagnosed high and low arched children. Copyright © 2018 Elsevier B.V. All rights reserved.

An overview of PET/MR, focused on clinical applications.

PubMed

Catalano, Onofrio Antonio; Masch, William Roger; Catana, Ciprian; Mahmood, Umar; Sahani, Dushyant Vasudeo; Gee, Michael Stanley; Menezes, Leon; Soricelli, Andrea; Salvatore, Marco; Gervais, Debra; Rosen, Bruce Robert

2017-02-01

Hybrid PET/MR scanners are innovative imaging devices that simultaneously or sequentially acquire and fuse anatomical and functional data from magnetic resonance (MR) with metabolic information from positron emission tomography (PET) (Delso et al. in J Nucl Med 52:1914-1922, 2011; Zaidi et al. in Phys Med Biol 56:3091-3106, 2011). Hybrid PET/MR scanners have the potential to greatly impact not only on medical research but also, and more importantly, on patient management. Although their clinical applications are still under investigation, the increased worldwide availability of PET/MR scanners, and the growing published literature are important determinants in their rising utilization for primarily clinical applications. In this manuscript, we provide a summary of the physical features of PET/MR, including its limitations, which are most relevant to clinical PET/MR implementation and to interpretation. Thereafter, we discuss the most important current and emergent clinical applications of such hybrid technology in the abdomen and pelvis, both in the field of oncologic and non-oncologic imaging, and we provide, when possible, a comparison with clinically consolidated imaging techniques, like for example PET/CT.

Large-scale numerical simulations of polydisperse particle flow in a silo

NASA Astrophysics Data System (ADS)

Rubio-Largo, S. M.; Maza, D.; Hidalgo, R. C.

2017-10-01

Very recently, we have examined experimentally and numerically the micro-mechanical details of monodisperse particle flows through an orifice placed at the bottom of a silo (Rubio-Largo et al. in Phys Rev Lett 114:238002, 2015). Our findings disentangled the paradoxical ideas associated to the free-fall arch concept, which has historically served to justify the dependence of the flow rate on the outlet size. In this work, we generalize those findings examining large-scale polydisperse particle flows in silos. In the range of studied apertures, both velocity and density profiles at the aperture are self-similar, and the obtained scaling functions confirm that the relevant scale of the problem is the size of the aperture. Moreover, we find that the contact stress monotonically decreases when the particles approach the exit and vanish at the outlet. The behavior of this magnitude is practically independent of the size of the orifice. However, the total and partial kinetic stress profiles suggest that the outlet size controls the propagation of the velocity fluctuations inside the silo. Examining this magnitude, we conclusively argue that indeed there is a well-defined transition region where the particle flow changes its nature. The general trend of the partial kinetic pressure profiles and the location of the transition region results the same for all particle types. We find that the partial kinetic stress is larger for bigger particles. However, the small particles carry a higher fraction of kinetic stress respect to their concentration, which suggest that the small particles have larger velocity fluctuations than the large ones and showing lower strength of correlation with the global flow. Our outcomes explain why the free-fall arch picture has served to describe the polydisperse flow rate in the discharge of silos.

Diapiric origin of the Blytheville and Pascola arches in the Reelfoot rift, east-central United States: Relation to New Madrid seismicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKeown, F.A.; Diehl, S.F.; Glick, E.E.

1990-11-01

Most of the earthquakes in the New Madrid seismic zone correlate spatially with the Blytheville arch and part of the Pascoal arch, which are interpreted to be the same structure. Both arches may have formed by diapirism along the axis of the Reelfoot rift. Seismic, geophysical, and drill-hole data indicate that the rocks in the arches are highly deformed and fractured and have gross lithologic properties that make them weaker than rocks adjacent to the arches. The weaker rocks are inferred to fail seismically more readily than the stronger rocks adjacent to the arches.

The Biomechanics of Zygomatic Arch Shape.

PubMed

Smith, Amanda L; Grosse, Ian R

2016-12-01

Mammalian zygomatic arch shape is remarkably variable, ranging from nearly cylindrical to blade-like in cross section. Based on geometry, the arch can be hypothesized to be a sub-structural beam whose ability to resist deformation is related to cross sectional shape. We expect zygomatic arches with different cross sectional shapes to vary in the degree to which they resist local bending and torsion due to the contraction of the masseter muscle. A stiffer arch may lead to an increase in the relative proportion of applied muscle load being transmitted through the arch to other cranial regions, resulting in elevated cranial stress (and thus, strain). Here, we examine the mechanics of the zygomatic arch using a series of finite element modeling experiments in which the cross section of the arch of Pan troglodytes has been modified to conform to idealized shapes (cylindrical, elliptical, blade-like). We find that the shape of the zygomatic arch has local effects on stain that do not conform to beam theory. One exception is that possessing a blade-like arch leads to elevated strains at the postorbital zygomatic junction and just below the orbits. Furthermore, although modeling the arch as solid cortical bone did not have the effect of elevating strains in other parts of the face, as had been expected, it does have a small effect on stress associated with masseter contraction. These results are counterintuitive. Even though the arch has simple beam-like geometry, we fail to find a simple mechanical explanation for the diversity of arch shape. Anat Rec, 299:1734-1752, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

The Foot’s Arch and the Energetics of Human Locomotion

PubMed Central

Stearne, Sarah M.; McDonald, Kirsty A.; Alderson, Jacqueline A.; North, Ian; Oxnard, Charles E.; Rubenson, Jonas

2016-01-01

The energy-sparing spring theory of the foot’s arch has become central to interpretations of the foot’s mechanical function and evolution. Using a novel insole technique that restricted compression of the foot’s longitudinal arch, this study provides the first direct evidence that arch compression/recoil during locomotion contributes to lowering energy cost. Restricting arch compression near maximally (~80%) during moderate-speed (2.7 ms−1) level running increased metabolic cost by + 6.0% (p < 0.001, d = 0.67; unaffected by foot strike technique). A simple model shows that the metabolic energy saved by the arch is largely explained by the passive-elastic work it supplies that would otherwise be done by active muscle. Both experimental and model data confirm that it is the end-range of arch compression that dictates the energy-saving role of the arch. Restricting arch compression had no effect on the cost of walking or incline running (3°), commensurate with the smaller role of passive-elastic mechanics in these gaits. These findings substantiate the elastic energy-saving role of the longitudinal arch during running, and suggest that arch supports used in some footwear and orthotics may increase the cost of running. PMID:26783259

Three-dimensional measurement of foot arch in preschool children

PubMed Central

2012-01-01

Background The prevalence of flexible flatfoot is high among preschool-aged children, but the effects of treatment are inconclusive due to the unclear definitions of normal flatfoot. To date, a universally accepted evaluation method of the foot arch in children has not been completely established. Our aims of this study were to establish a new method to evaluate the foot arch from a three dimensional perspective and to investigate the flexibility of the foot arch among children aged from two to six. Methods A total of 44 children aged from two to six years of age were put into five age groups in this study. The navicular height was measured with one leg standing, and both feet were scanned separately in both sitting and one leg standing positions to compute the foot arch volume. The arch volume index, which represents the ratio of the difference in volume between sitting and one leg standing positions to the volume when sitting was calculated to demonstrate the flexibility of the foot arch. The differences of measured parameters between each aged group were analyzed by one-way ANOVA. Results The arch volumes when sitting and standing were highly correlated with the navicular height. The navicular height ranged from 15.75 to 27 mm, the arch volume when sitting ranged from 6,223 to 11,630 mm3, and the arch volume when standing from 3,111 to 7,848 mm3 from two to six years of age. The arch volume index showed a declining trend as age increased. Conclusion This study is the first to describe the foot arch with volume perspective in preschool-aged children. The foot arch volume was highly correlated with the navicular height. Research results show both navicular height index and arch volume index gradually increase with age from two to six. At the same time the arch also becomes rigid with age from two to six. These results could be applied for clinical evaluation of the foot arch and post-treatment evaluation. PMID:23009315

A modern Monte Carlo investigation of the TG-43 dosimetry parameters for an {sup 125}I seed already having AAPM consensus data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aryal, Prakash; Molloy, Janelle A.; Rivard, Mark J., E-mail: mark.j.rivard@gmail.com

2014-02-15

Purpose: To investigate potential causes for differences in TG-43 brachytherapy dosimetry parameters in the existent literature for the model IAI-125A{sup 125}I seed and to propose new standard dosimetry parameters. Methods: The MCNP5 code was used for Monte Carlo (MC) simulations. Sensitivity of dose distributions, and subsequently TG-43 dosimetry parameters, was explored to reproduce historical methods upon which American Association of Physicists in Medicine (AAPM) consensus data are based. Twelve simulation conditions varying{sup 125}I coating thickness, coating mass density, photon interaction cross-section library, and photon emission spectrum were examined. Results: Varying{sup 125}I coating thickness, coating mass density, photon cross-section library, andmore » photon emission spectrum for the model IAI-125A seed changed the dose-rate constant by up to 0.9%, about 1%, about 3%, and 3%, respectively, in comparison to the proposed standard value of 0.922 cGy h{sup −1} U{sup −1}. The dose-rate constant values by Solberg et al. [“Dosimetric parameters of three new solid core {sup 125}I brachytherapy sources,” J. Appl. Clin. Med. Phys. 3, 119–134 (2002)], Meigooni et al. [“Experimental and theoretical determination of dosimetric characteristics of IsoAid ADVANTAGE™ {sup 125}I brachytherapy source,” Med. Phys. 29, 2152–2158 (2002)], and Taylor and Rogers [“An EGSnrc Monte Carlo-calculated database of TG-43 parameters,” Med. Phys. 35, 4228–4241 (2008)] for the model IAI-125A seed and Kennedy et al. [“Experimental and Monte Carlo determination of the TG-43 dosimetric parameters for the model 9011 THINSeed™ brachytherapy source,” Med. Phys. 37, 1681–1688 (2010)] for the model 6711 seed were +4.3% (0.962 cGy h{sup −1} U{sup −1}), +6.2% (0.98 cGy h{sup −1} U{sup −1}), +0.3% (0.925 cGy h{sup −1} U{sup −1}), and −0.2% (0.921 cGy h{sup −1} U{sup −1}), respectively, in comparison to the proposed standard value. Differences in the radial dose functions between the current study and both Solberg et al. and Meigooni et al. were <10% for r ≤ 5 cm, and increased for r > 5 cm with a maximum difference of 29% at r = 9 cm. In comparison to Taylor and Rogers, these differences were lower (maximum of 2% at r = 9 cm). For the similarly designed model 6711 {sup 125}I seed, differences did not exceed 0.5% for 0.5 ≤ r ≤ 10 cm. Radial dose function values varied by 1% as coating thickness and coating density were changed. Varying the cross-section library and source spectrum altered the radial dose function by 25% and 12%, respectively, but these differences occurred at r = 10 cm where the dose rates were very low. The 2D anisotropy function results were most similar to those of Solberg et al. and most different to those of Meigooni et al. The observed order of simulation condition variables from most to least important for influencing the 2D anisotropy function was spectrum, coating thickness, coating density, and cross-section library. Conclusions: Several MC radiation transport codes are available for calculation of the TG-43 dosimetry parameters for brachytherapy seeds. The physics models in these codes and their related cross-section libraries have been updated and improved since publication of the 2007 AAPM TG-43U1S1 report. Results using modern data indicated statistically significant differences in these dosimetry parameters in comparison to data recommended in the TG-43U1S1 report. Therefore, it seems that professional societies such as the AAPM should consider reevaluating the consensus data for this and others seeds and establishing a process of regular evaluations in which consensus data are based upon methods that remain state-of-the-art.« less

Differential distribution of the Ca (2+) regulator Pcp4 in the branchial arches is regulated by Hoxa2.

PubMed

Anderson, Megan; Amin, Shilu; Luise, Fabiana; Zeef, Leo; Bobola, Nicoletta

2013-01-01

Branchial arches are externally visible tissue bands in the head region of all vertebrate embryos. Although initially formed from similar components, each arch will give rise to different head and neck structures. In a screen designed to characterize the molecular control of branchial arch identity in mouse, we identified Pcp4 as a second branchial arch-specific molecular signature. We further show that the transcription factor Hoxa2 binds to Pcp4 chromatin and regulates Pcp4 expression in the second arch. Hoxa2 is also sufficient to induce Pcp4 expression in anterior first arch cells, which are Pcp4-negative.

Determining shapes and dimensions of dental arches for the use of straight-wire arches in lingual technique.

PubMed

Kairalla, Silvana Allegrini; Scuzzo, Giuseppe; Triviño, Tarcila; Velasco, Leandro; Lombardo, Luca; Paranhos, Luiz Renato

2014-01-01

This study aims to determine the shape and dimension of dental arches from a lingual perspective, and determine shape and size of a straight archwire used for lingual Orthodontics. The study sample comprised 70 Caucasian Brazilian individuals with normal occlusion and at least four of Andrew's six keys. Maxillary and mandibular dental casts were digitized (3D) and the images were analyzed by Delcam Power SHAPET 2010 software. Landmarks on the lingual surface of teeth were selected and 14 measurements were calculated to determine the shape and size of dental arches. Shapiro-Wilk test determined small arch shape by means of 25th percentile (P25%)--an average percentile for the medium arch; and a large one determined by means of 75th percentile (P75%). T-test revealed differences between males and females in the size of 12 dental arches. The straight-wire arch shape used in the lingual straight wire technique is a parabolic-shaped arch, slightly flattened on its anterior portion. Due to similarity among dental arch sizes shown by males and females, a more simplified diagram chart was designed.

Pennsylvanian history of the Chautauqua Arch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennison, A.P.

1993-03-01

Westward extension of the Ozark Uplift known as the Chautauqua Arch is concealed by a Pennsylvanian cover. This cover provides an insight into its later tectonic history subsequent to its major Late Devonian uplift and truncation. Part of this arch was episodically uplifted during Pennsylvanian time in an area extending west from southwestern Missouri along the Kansas-Oklahoma border to western Montgomery County. Recent stratigraphic mapping in that county indicates moderate Late Desmoinesian to Missourian tectonism. Some strata present on both flanks of the arch are either comparatively thin or missing owing to unconformity truncation or non-deposition. Stratal loss involves themore » Lenapah Limestone, the Hepler and Lost Branch formations, the Cherryvale Shale and the Hertha, Drum, Dewey, Stanton and Wyandotte Limestones. Earlier movements also account for the truncation of Morrowan, Atokan and possibly some Early Desmoinesian beds over the arch. Between tectonic episodes along the arch there were periods of relative tectonic quiescence accompanied by shelf-edge carbonate banks, condensed sequences and siliciclastic sedimentation. West of Montgomery County in Chautauqua County, the widespread Late Pennsylvanian Virgilian outcrops show practically no tectonism. Therefore, the name Chautauqua Arch seems inappropriate for this Pennsylvanian arch, and the name Tri-State Arch is proposed. This arch is bounded on the north by the Cherokee Basin and on the south by the northern rise of the Arkoma Basin. Although this arch is commonly omitted on many tectonic maps, it is a stronger gravity feature than the Bourbon Arch about 50 miles northward. Both tectonic and sedimentary structures have produced much oil and gas entrapment along this arch. For example, an east-west fault south of Independence, aligned with buried Proterozoic hills, has been specially productive.« less

10. DETAIL OF WEST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. DETAIL OF WEST ARCH, FROM ROADWAY, SHOWING ARCH RIB, HANGERS AND GUARDRAIL. VIEW TO SOUTH. - Rock Valley Bridge, Spanning North Timber Creek at Old U.S. Highway 30, Marshalltown, Marshall County, IA

Laryngeal flow due to longitudinal sweeping motion of the vocal folds and its contribution to auto-oscillation.

PubMed

Boutin, Henri; Smith, John; Wolfe, Joe

2015-07-01

Analysis of published depth-kymography data [George, de Mul, Qiu, Rakhorst, and Schutte (2008). Phys. Med. Biol. 53, 2667-2675] shows that, for the subject studied, the flow due to the longitudinal sweeping motion of the vocal folds contributes several percent of a typical acoustic flow at the larynx. This sweeping flow is a maximum when the glottis is closed. This observation suggests that assumption of zero laryngeal flow during the closed phase as a criterion when determining parameters in inverse filtering should be used with caution. Further, these data suggest that the swinging motion contributes work to overcome mechanical losses and thus to assist auto-oscillation.

Influence of posterior dental arch length on brain activity during chewing in patients with mandibular distal extension removable partial dentures.

PubMed

Shoi, K; Fueki, K; Usui, N; Taira, M; Wakabayashi, N

2014-07-01

It is well known that shortened dental arch decreases masticatory function. However, its potential to change brain activity during mastication is unknown. The present study investigates the effect of a shortened posterior dental arch with mandibular removable partial dentures (RPDs) on brain activity during gum chewing. Eleven subjects with missing mandibular molars (mean age, 66.1 years) on both sides received experimental RPDs with interchangeable artificial molars in a crossover trial design. Brain activity during gum chewing with RPDs containing (full dental arch) and lacking artificial molars (shortened dental arch) was measured using functional magnetic resonance imaging. Additionally, masticatory function was evaluated for each dental arch type. Food comminuting and mixing ability and the perceived chewing ability were significantly lower in subjects with a shortened dental arch than those with a full dental arch (P < 0.05). Brain activation during gum chewing with the full dental arch occurred in the middle frontal gyrus, primary sensorimotor cortex extending to the pre-central gyrus, supplementary motor area, putamen, insula and cerebellum. However, middle frontal gyrus activation was not observed during gum chewing with the shortened dental arch. These results suggest that shortened dental arch affects human brain activity in the middle frontal gyrus during gum chewing, and the decreased middle frontal gyrus activation may be associated with decreased masticatory function. © 2014 John Wiley & Sons Ltd.

9. DETAIL OF EAST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. DETAIL OF EAST ARCH, FROM ROADWAY, SHOWING ARCH RIB, ARTICULATED HANGER AND GUARDRAIL. VIEW TO SOUTHEAST. - Rock Valley Bridge, Spanning North Timber Creek at Old U.S. Highway 30, Marshalltown, Marshall County, IA

Properties of coronal arches

NASA Technical Reports Server (NTRS)

Davis, J. M.; Krieger, A. S.

1982-01-01

The properties of coronal arches located on the peripheries of active regions, observed during a sounding rocket flight on March 8, 1973, are discussed. The arches are found to overlie filament channels and their footpoints are traced on locations on the perimeters of supergranulation cells. The arches have a wide range of lengths although their widths are well approximated by the value 2.2 x 10 to the 9th cm. Comparison of the size of the chromospheric footprint with the arc width indicates that arches do not always expand as they ascend into the corona. The electron temperatures and densities of the plasma contained in the arches were measured and the pressure calculated; typical values are 2-million K, 1 x 10 to the 9th/cu cm, and 0.2 dyne/sq cm, respectively. The variation of these parameters with position along the length of the arch indicates that the arches are not in hydrostatic equilibrium.

In-plane free vibration analysis of cable arch structure

NASA Astrophysics Data System (ADS)

Zhao, Yueyu; Kang, Houjun

2008-05-01

Cable-stayed arch bridge is a new type of composite bridge, which utilizes the mechanical characters of cable and arch. Based on the supporting members of cable-stayed arch bridge and of erection of arch bridge using of the cantilever construction method with tiebacks, we propose a novel mechanical model of cable-arch structure. In this model, the equations governing vibrations of the cable-arch are derived according to Hamilton's principle for dynamic problems in elastic body under equilibrium state. Then, the program of solving the dynamic governing equations is ultimately established by the transfer matrix method for free vibration of uniform and variable cross-section, and the internal characteristics of the cable-arch are investigated. After analyzing step by step, the research results approve that the program is accurate; meanwhile, the mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Reporting of dental status from full-arch radiographs: Descriptive analysis and methodological aspects.

PubMed

Huettig, Fabian; Axmann, Detlef

2014-10-16

To identify standards, how entities of dental status are assessed and reported from full-arch radiographs of adults. A PubMed (Medline) search was performed in November 2011. Literature had to report at least one out of four defined entities using radiographs: number of teeth or implants; caries, fillings or restorations; root-canal fillings and apical health; alveolar bone level. Cohorts included to the study had to be of adult age. Methods of radiographic assessment were noted and checked for the later mode of report in text, tables or diagrams. For comparability, the encountered mode of report was operationalized to a logical expression. Thirty-seven out of 199 articles were evaluated via full-text review. Only one article reported all four entities. Eight articles reported at the maximum 3 comparable entities. However, comparability is impeded because of the usage of absolute or relative frequency, mean or median values as well as grouping. Furthermore the methods of assessment were different or not described sufficiently. Consequently, established sum scores turned out to be highly questionable, too. The amount of missing data within all studies remained unclear. It is even so remissed to mention supernumerary and aplased teeth as well as the count of third molars. Data about dental findings from radiographs is, if at all possible, only comparable with serious limitations. A standardization of both, assessing and reporting entities of dental status from radiographs is missing and has to be established within a report guideline.

Neuroanatomy and neurophysiology related to sexual dysfunction in male neurogenic patients with lesions to the spinal cord or peripheral nerves.

PubMed

Everaert, K; de Waard, W I Q; Van Hoof, T; Kiekens, C; Mulliez, T; D'herde, C

2010-03-01

Review article. The neuroanatomy and physiology of psychogenic erection, cholinergic versus adrenergic innervation of emission and the predictability of outcome of vibration and electroejaculation require a review and synthesis. University Hospital Belgium. We reviewed the literature with PubMed 1973-2008. Erection, emission and ejaculation are separate phenomena and have different innervations. It is important to realize, which are the afferents and efferents and where the motor neuron of the end organ is located. When interpreting a specific lesion it is important to understand if postsynaptic fibres are intact or not. Afferents of erection, emission and ejaculation are the pudendal nerve and descending pathways from the brain. Erection is cholinergic and NO-mediated. Emission starts cholinergically (as a secretion) and ends sympathetically (as a contraction). Ejaculation is mainly adrenergic and somatic. For vibratory-evoked ejaculation, the reflex arch must be complete; for electroejaculation, the postsynaptic neurons (paravertebral ganglia) must be intact. Afferents of erection, emission and ejaculation are the pudendal nerve and descending pathways from the brain. Erection is cholinergic and NO-mediated. Emission starts cholinergically (as a secretion) and ends sympathetically (as a contraction). Ejaculation is mainly adrenergic and somatic. In neurogenic disease, a good knowledge of neuroanatomy and physiology makes understanding of sexual dysfunction possible and predictable. The minimal requirement for the success of penile vibration is a preserved reflex arch and the minimal requirement for the success of electroejaculation is the existence of intact post-ganglionic fibres.

The evolution of amphibian metamorphosis: insights based on the transformation of the aortic arches of Pelobates fuscus (Anura)

PubMed Central

Kolesová, Hana; Lametschwandtner, Alois; Roček, Zbyněk

2007-01-01

In order to gain insights into how the aortic arches changed during the transition of vertebrates to land, transformations of the aortic arches during the metamorphosis of Pelobates fuscus were investigated and compared with data from the early development of a recent ganoid fish Amia calva and a primitive caudate amphibian Salamandrella keyserlingi. Although in larval Pelobates, as in other non-pipid anurans, the gill arches serve partly as a filter-feeding device, their aortic arches maintain the original piscine-like arrangement, except for the mandibular and hyoid aortic arches which were lost. As important pre-adaptations for breathing of atmospheric oxygen occur in larval Pelobates (which have well-developed, though non-respiratory lungs and pulmonary artery), transformation of aortic arches during metamorphosis is fast. The transformation involves disappearance of the ductus Botalli, which results in a complete shunting of blood into the lungs and skin, disappearance of the ductus caroticus, which results in shunting of blood into the head through the arteria carotis interna, and disappearance of arch V, which results in shunting blood to the body through arch IV (systemic arch). It is supposed that the branching pattern of the aortic arches of permanently water-dwelling piscine ancestors, of intermediate forms which occasionally left the water and of primitive tetrapods capable of spending longer periods of time on land had been the same as in the prematamorphic anuran larvae or in some metamorphosed caudates in which the ductus caroticus and ductus Botalli were not interrupted, and arch V was still complete. PMID:17367494

The evolution of amphibian metamorphosis: insights based on the transformation of the aortic arches of Pelobates fuscus (Anura).

PubMed

Kolesová, Hana; Lametschwandtner, Alois; Rocek, Zbynek

2007-04-01

In order to gain insights into how the aortic arches changed during the transition of vertebrates to land, transformations of the aortic arches during the metamorphosis of Pelobates fuscus were investigated and compared with data from the early development of a recent ganoid fish Amia calva and a primitive caudate amphibian Salamandrella keyserlingi. Although in larval Pelobates, as in other non-pipid anurans, the gill arches serve partly as a filter-feeding device, their aortic arches maintain the original piscine-like arrangement, except for the mandibular and hyoid aortic arches which were lost. As important pre-adaptations for breathing of atmospheric oxygen occur in larval Pelobates (which have well-developed, though non-respiratory lungs and pulmonary artery), transformation of aortic arches during metamorphosis is fast. The transformation involves disappearance of the ductus Botalli, which results in a complete shunting of blood into the lungs and skin, disappearance of the ductus caroticus, which results in shunting of blood into the head through the arteria carotis interna, and disappearance of arch V, which results in shunting blood to the body through arch IV (systemic arch). It is supposed that the branching pattern of the aortic arches of permanently water-dwelling piscine ancestors, of intermediate forms which occasionally left the water and of primitive tetrapods capable of spending longer periods of time on land had been the same as in the prematamorphic anuran larvae or in some metamorphosed caudates in which the ductus caroticus and ductus Botalli were not interrupted, and arch V was still complete.

Standardizing Foot-Type Classification Using Arch Index Values

PubMed Central

Weil, Rich; de Boer, Emily

2012-01-01

ABSTRACT Purpose: The lack of a reliable classification standard for foot type makes drawing conclusions from existing research and clinical decisions difficult, since different foot types may move and respond to treatment differently. The purpose of this study was to determine interrater agreement for foot-type classification based on photo-box-derived arch index values. Method: For this correlational study with two raters, a sample of 11 healthy volunteers with normal to obese body mass indices was recruited from both a community weight-loss programme and a programme in physical therapy. Arch index was calculated using AutoCAD software from footprint photographs obtained via mirrored photo-box. Classification as high-arched, normal, or low-arched foot type was based on arch index values. Reliability of the arch index was determined with intra-class correlations; agreement on foot-type classification was determined using quadratic weighted kappa (κw). Results: Average arch index was 0.215 for one tester and 0.219 for the second tester, with an overall range of 0.017 to 0.370. Both testers classified 6 feet as low-arched, 9 feet as normal, and 7 feet as high-arched. Interrater reliability for the arch index was ICC=0.90; interrater agreement for foot-type classification was κw=0.923. Conclusions: Classification of foot type based on arch index values derived from plantar footprint photographs obtained via mirrored photo-box showed excellent reliability in people with varying BMI. Foot-type classification may help clinicians and researchers subdivide sample populations to better differentiate mobility, gait, or treatment effects among foot types. PMID:23729964

Branchial cleft anomalies: a pictorial review of embryological development and spectrum of imaging findings.

PubMed

Adams, Ashok; Mankad, Kshitij; Offiah, Curtis; Childs, Lucy

2016-02-01

The branchial arches are the embryological precursors of the face, neck and pharynx. Anomalies of the branchial arches are the second most common congenital lesions of the head and neck in children, with second branchial arch anomalies by far the most common. Clinically, these congenital anomalies may present as cysts, sinus tracts, fistulae or cartilaginous remnants with typical clinical and radiological findings. We review the normal embryological development of the branchial arches and the anatomical structures of the head and neck that derive from each arch. The typical clinical and radiological appearances of both common and uncommon branchial arch abnormalities are discussed with an emphasis on branchial cleft anomalies. • Anomalies of the branchial arches usually present as cysts, sinuses or fistulae. • Second branchial arch anomalies account for approximately 95 % of cases. • There are no pathognomonic imaging features so diagnosis depends on a high index of suspicion and knowledge of typical locations. • Persistent cysts, fistulae or recurrent localised infection may be due to branchial arch anomalies. • Surgical excision of the cyst or tract is the most common curative option.

3. View locking east of 591 foot steel arch of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. View locking east of 591 foot steel arch of bridge. Arch consists of Pratt trusses divided into twenty-four, 24 foot, 7 inch panels. It was fabricated by the King Iron Bridge Company of Cleveland whose circular plaque can be seen where the arch meets the roadway. The steel arch was erected by the Berro construction Co. of Chicago. - Detroit Superior High Level Bridge, Cleveland, Cuyahoga County, OH

Dental arch dimensions, form and tooth size ratio among a Saudi sample.

PubMed

Omar, Haidi; Alhajrasi, Manar; Felemban, Nayef; Hassan, Ali

2018-01-01

To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters. Methods: This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton's ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016. Results: Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p less than 0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton's anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton's overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton's ratio. Conclusion: The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton's anterior teeth ratio than in overall ratio.

Rearfoot eversion has indirect effects on plantar fascia tension by changing the amount of arch collapse.

PubMed

Lee, Sae Yong; Hertel, Jay; Lee, Sung Cheol

2010-01-01

Rearfoot eversion motion and arch height are believed to contribute to increased tension on the plantar fascia and arch collapse during gait but the specifics of these relationships are not clear. To examine the relationships among static arch height, rearfoot eversion, dynamic arch height, and plantar fascia tension. 28 healthy males participated. After static arch height was measured, the subjects were asked to run at 4.5m/s while frontal plane rearfoot motion, dynamic arch height, and ground reaction forces were collected. The relationships among variables were examined with bivariate correlations and path analysis. The results indicated a high correlation between dynamic arch height and static arch height (r=0.642), plantar fascia tension (r=-0.797), and maximum rearfoot eversion motion during gait (r=-0.518). The path analysis model without the direct rearfoot eversion effect explained 81.2% of the variance in plantar fascia tension, while the model with the direct rearfoot eversion effect explained 82.1% of the variance in plantar fascia tension. Including the indirect effect of maximum rearfoot eversion motion on plantar fascia tension through control of dynamic arch height is the model that best explains the interrelationships of these foot characteristics. The amount of maximum rearfoot eversion motion itself is not a good predictor of plantar fascia tension, however, together with the arch height, maximum rearfoot eversion motion is a good predictor because it has a pronounced indirect effect on plantar fascia tension. Copyright 2010. Published by Elsevier Ltd.

[Angiographic evaluation of branching pattern and anatomy of the aortic arch].

PubMed

Ergun, Onur; Tatar, İdil Güneş; Birgi, Erdem; Durmaz, Hasan Ali; Akçalar, Seray; Kurt, Aydın; Hekimoğlu, Baki

2015-04-01

The study aimed to investigate anatomical variations in branching pattern and anatomy of the aortic arch, and the prevalence of each type. Between September 2011 and November 2013, angiographic studies of 270 patients (144 male, 126 female) were analyzed retrospectively for variations in branching pattern and anatomy of the aortic arch. Patient mean age was 59.8 years (range, 13-88). Branching variations were found and divided into subtypes. Patients were also classified according to arch anatomy. Incidence of variations and types of aortic arch were statistically analysed. Analysis of the 270 patients revealed six types of branching pattern. Type I, classical pattern arch with three branches (TB, LCC, LS), was observed in 198 cases (73.3%). Type II (bovine arch), the most commonly observed variation, in which LCC originates from TB, was observed in 58 cases (21.5%). Type III, in which the left vertebral artery arises from the arch, was seen in seven cases (2.6%). Type IV, a combination of types II and III, was observed in three cases (1.1%). Type V, common origin of common carotids, LS and aberrant RS, was found in three cases (1.1%). Type VI (avian type), arch with only two branches, was observed in one case (0.4%). When patients were classified according to aortic arch anatomy, Type 1, Type 2 and Type 3 were observed in 195, 40 and 35 patients respectively. Knowledge of the variations and anatomy of the aortic arch is essential during interventional procedures and neck-thorax surgery.

Comparison of arch forms between Egyptian and North American white populations.

PubMed

Bayome, Mohamed; Sameshima, Glenn T; Kim, Yoonji; Nojima, Kunihiko; Baek, Seung-Hak; Kook, Yoon-Ah

2011-03-01

The aim of this study was to evaluate the morphologic differences in the mandibular arches of Egyptian and North American white subjects. The sample included 94 Egyptian subjects (35 Class I, 32 Class II, and 27 Class III) and 92 white subjects (37 Class I, 29 Class II, and 26 Class III). The subjects were grouped according to arch form types (tapered, ovoid, and square) to compare their frequency distribution between ethnic groups in each Angle classification. The most facial portions of 13 proximal contact areas were digitized on scanned images of mandibular casts to estimate the corresponding clinical bracket point for each tooth. Four linear and 2 proportional measurements were taken. In comparing arch dimensions, intermolar width was narrower in Egyptians than in the whites (P = 0.001). There was an even frequency distribution of the 3 arch forms in the Egyptian group. On the other hand, the most frequent arch form was ovoid followed by tapered and square in the white group; the square arch form was significantly less frequent than the tapered and ovoid arch forms (P = 0.029). The arch forms of Egyptians are narrower than those of whites. The distribution of the arch form types in Egyptians showed similar frequency, but the square arch form was less frequent in whites. It is recommended to select narrower archwires from the available variations to suit many Egyptian patients. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

3. VIEW OF DOWNSTREAM ARCHES. MASONRY ABOVE ARCHES IN THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW OF DOWNSTREAM ARCHES. MASONRY ABOVE ARCHES IN THE SPANDREL WALL IS LAID IN A SEMI-COURSED RUBBLE PATTERN. - Core Creek County Bridge, Spanning Core Creek, approximately 1 mile South of State Route 332 (Newtown Bypass), Newtown, Bucks County, PA

Vocal cord paralysis after aortic arch surgery: predictors and clinical outcome.

PubMed

Ohta, Noriyuki; Kuratani, Toru; Hagihira, Satoshi; Kazumi, Ken-Ichiro; Kaneko, Mitsunori; Mori, Takahiko

2006-04-01

This study is retrospective cohort study of data on vocal cord paralysis after aortic arch surgery collected during 14 years at a general hospital. We investigated factors in the development of vocal cord paralysis after aortic arch surgery and the effect of vocal cord paralysis on clinical course and outcome. We reviewed data for 182 patients who underwent aortic arch surgery for aortic arch aneurysm and aortic dissection between 1989 and 2003, of whom 58 patients had proximal aortic repair, 62 had distal arch repair, and 62 had total arch repair. We assessed factors associated with the development of vocal cord paralysis and examined in detail the clinical outcome of patients with vocal cord paralysis. Postoperative vocal cord paralysis occurred in 40 patients. Multiple logistic regression analysis revealed the following risk factors with odds ratios (OR) for vocal cord paralysis: extension of procedures into distal arch (OR, 17.0), chronic dilatation of the aorta at the left subclavian artery (OR, 9.14), and total arch repair (OR, 4.24). Adoption of open-style stent-grafts reduced the incidence of vocal cord paralysis (OR, 0.031). The postoperative occurrence of vocal cord paralysis itself emerges as an independent predictor of pulmonary complications (OR, 4.12) and leads to a longer duration of hospital stay. The risk of vocal cord paralysis after aortic arch surgery depends on surgical factors, such as aneurysmal involvement of the distal arch, or the application of newer, less invasive surgical procedures. Vocal cord paralysis after aortic arch surgery itself, under aggressive postoperative respiratory management, did not increase aspiration pneumonia but was associated with postoperative complications leading to higher hospital mortality and prolonged hospitalization.

Calcification at orifices of aortic arch branches is a reliable and significant marker of stenosis at carotid bifurcation and intracranial arteries.

PubMed

Yamada, Shigeki; Hashimoto, Kenji; Ogata, Hideki; Watanabe, Yoshihiko; Oshima, Marie; Miyake, Hidenori

2014-02-01

Simple rating scale for calcification in the cervical arteries and the aortic arch on multi-detector computed tomography angiography (MDCTA) was evaluated its reliability and validity. Additionally, we investigated where is the most representative location for evaluating the calcification risk of carotid bifurcation stenosis and atherosclerotic infarction in the overall cervical arteries covering from the aortic arch to the carotid bifurcation. The aortic arch and cervical arteries among 518 patients (292 men, 226 women) were evaluated the extent of calcification using a 4-point grading scale for MDCTA. Reliability, validity and the concomitant risk with vascular stenosis and atherosclerotic infarction were assessed. Calcification was most frequently observed in the aortic arch itself, the orifices from the aortic arch, and the carotid bifurcation. Compared with the bilateral carotid bifurcations, the aortic arch itself had a stronger inter-observer agreement for the calcification score (Fleiss' kappa coefficients; 0.77), but weaker associations with stenosis and atherosclerotic infarction. Calcification at the orifices of the aortic arch branches had a stronger inter-observer agreement (0.74) and enough associations with carotid bifurcation stenosis and intracranial stenosis. In addition, the extensive calcification at the orifices from the aortic arch was significantly associated with atherosclerotic infarction, similar to the calcification at the bilateral carotid bifurcations. The orifices of the aortic arch branches were the novel representative location of the aortic arch and overall cervical arteries for evaluating the calcification extent. Thus, calcification at the aortic arch should be evaluated with focus on the orifices of 3 main branches. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Maxillary arch dimensions associated with acoustic parameters in prepubertal children.

PubMed

Hamdan, Abdul-Latif; Khandakji, Mohannad; Macari, Anthony Tannous

2018-04-18

To evaluate the association between maxillary arch dimensions and fundamental frequency and formants of voice in prepubertal subjects. Thirty-five consecutive prepubertal patients seeking orthodontic treatment were recruited (mean age = 11.41 ± 1.46 years; range, 8 to 13.7 years). Participants with a history of respiratory infection, laryngeal manipulation, dysphonia, congenital facial malformations, or history of orthodontic treatment were excluded. Dental measurements included maxillary arch length, perimeter, depth, and width. Voice parameters comprising fundamental frequency (f0_sustained), Habitual pitch (f0_count), Jitter, Shimmer, and different formant frequencies (F1, F2, F3, and F4) were measured using acoustic analysis prior to initiation of any orthodontic treatment. Pearson's correlation coefficients were used to measure the strength of associations between different dental and voice parameters. Multiple linear regressions were computed for the predictions of different dental measurements. Arch width and arch depth had moderate significant negative correlations with f0 ( r = -0.52; P = .001 and r = -0.39; P = .022, respectively) and with habitual frequency ( r = -0.51; P = .0014 and r = -0.34; P = .04, respectively). Arch depth and arch length were significantly correlated with formant F3 and formant F4, respectively. Predictors of arch depth included frequencies of F3 vowels, with a significant regression equation ( P-value < .001; R 2 = 0.49). Similarly, fundamental frequency f0 and frequencies of formant F3 vowels were predictors of arch width, with a significant regression equation ( P-value < .001; R 2 = 0.37). There is a significant association between arch dimensions, particularly arch length and depth, and voice parameters. The formant most predictive of arch depth and width is the third formant, along with fundamental frequency of voice.

Using ArchE in the Classroom: One Experience

DTIC Science & Technology

2007-09-01

The Architecture Expert (ArchE) tool serves as a software architecture design assistant. It embodies knowledge of quality attributes and the relation...between the achievement of quality attribute requirements and architecture design . This technical note describes the use of a pre-alpha release of

Relationship between lumbar changes and modifications in the plantar arch in women with low back pain.

PubMed

Borges, Cláudia Dos Santos; Fernandes, Luciane Fernanda Rodrigues Martinho; Bertoncello, Dernival

2013-05-01

: Evaluate the probable relationship among plantar arch, lumbar curvature, and low back pain. : Fifteen healthy women were assessed taking in account personal data and anthropometric measurements, photopodoscopic evaluation of the plantar arch, and biophotogrammetric postural analysis of the patient (both using the SAPO software), as well as evaluation of lumbar pain using a Visual Analog Scale (VAS). The average age of the participants was 30.45 (±6.25) years. : Of the feet evaluated, there were six individuals with flat feet, five with high arch, and four with normal feet. All reported algic syndrome in the lumbar spine, with the highest VAS values for the volunteers with high arch. Correlation was observed between the plantar arch and the angle of the lumbar spine (r = -0.71, p = 0.004) CONCLUSION: High arch was correlated with more intense algic syndrome, while there was moderate positive correlation between flat foot and increased lumbar curvature, and between high arch and lumbar correction. Level of Evidence IV. Case Series .

SU-G-TeP3-09: Proton Minibeam Radiation Therapy Increases Normal Tissue Resistance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prezado, Y; Gonzalez-Infantes, W; Juchaux, M

Purpose: The dose tolerances of normal tissues continue being the main limitation in radiotherapy. To overcome it, we recently proposed a novel concept: proton minibeam radiation therapy (pMBRT) [1]. It allies the physical advantages of protons with the normal tissue preservation observed when irradiated with submillimetric spatially fractionated beams (minibeam radiation therapy) [2]. The dose distributions are such that the tumor receives a homogeneous dose distribution, while normal tissues benefit from the spatial fractionation of the dose. The objective of our work was to implement this promising technique at a clinical center (Proton therapy center in Orsay) in order tomore » evaluate the potential gain in tissue sparing. Methods: Dose distributions were measured by means of gafchromic films and a PTW microdiamond detector (60019). Once the dosimetry was established, the whole brain of 7 weeks old male Fischer 344 rats was irradiated. Half of the animals received conventional seamless proton irradiation (25 Gy in one fraction). The other rats were irradiated with pMBRT (58 Gy peak dose in one fraction). The average dose deposited in the same targeted volume was in both cases 25 Gy. Results: The first complete set of dosimetric data in such small proton field sizes was obtained [3]. Rats treated with conventional proton irradiation exhibited severe moist desquamation and permanent epilation afterwards. The minibeam group, on the other hand, exhibited no skin damage and no clinical symptoms. MRI imaging and histological analysis are planned at 6 months after irradiation. Conclusion: Our preliminary results indicate that pMBRT leads to an increase in tissue resistance. This can open the door to an efficient treatment of very radioresistant tumours. [1] Prezado et al. Med. Phys. 40, 031712, 1–8 (2013).[2] Prezado et al., Rad. Research. 184, 314-21 (2015). [3] Peucelle et al., Med. Phys. 42 7108-13 (2015).« less

Interior region-of-interest reconstruction using a small, nearly piecewise constant subregion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taguchi, Katsuyuki; Xu Jingyan; Srivastava, Somesh

2011-03-15

Purpose: To develop a method to reconstruct an interior region-of-interest (ROI) image with sufficient accuracy that uses differentiated backprojection (DBP) projection onto convex sets (POCS) [H. Kudo et al., ''Tiny a priori knowledge solves the interior problem in computed tomography'', Phys. Med. Biol. 53, 2207-2231 (2008)] and a tiny knowledge that there exists a nearly piecewise constant subregion. Methods: The proposed method first employs filtered backprojection to reconstruct an image on which a tiny region P with a small variation in the pixel values is identified inside the ROI. Total variation minimization [H. Yu and G. Wang, ''Compressed sensing basedmore » interior tomography'', Phys. Med. Biol. 54, 2791-2805 (2009); W. Han et al., ''A general total variation minimization theorem for compressed sensing based interior tomography'', Int. J. Biomed. Imaging 2009, Article 125871 (2009)] is then employed to obtain pixel values in the subregion P, which serve as a priori knowledge in the next step. Finally, DBP-POCS is performed to reconstruct f(x,y) inside the ROI. Clinical data and the reconstructed image obtained by an x-ray computed tomography system (SOMATOM Definition; Siemens Healthcare) were used to validate the proposed method. The detector covers an object with a diameter of {approx}500 mm. The projection data were truncated either moderately to limit the detector coverage to diameter 350 mm of the object or severely to cover diameter 199 mm. Images were reconstructed using the proposed method. Results: The proposed method provided ROI images with correct pixel values in all areas except near the edge of the ROI. The coefficient of variation, i.e., the root mean square error divided by the mean pixel values, was less than 2.0% or 4.5% with the moderate or severe truncation cases, respectively, except near the boundary of the ROI. Conclusions: The proposed method allows for reconstructing interior ROI images with sufficient accuracy with a tiny knowledge that there exists a nearly piecewise constant subregion.« less

A case of complete double aortic arch visualized by transthoracic echocardiography.

PubMed

Saito, Naka; Kato, Shingo; Saito, Noritaka; Nakachi, Tatsuya; Fukui, Kazuki; Iwasawa, Tae; Kosuge, Masami; Kimura, Kazuo

2017-08-01

A case of double aortic arch that was well visualized using transthoracic echocardiography is reported. A 38-year-old man underwent transthoracic echocardiography for the evaluation of dyspnea. A suprasternal view of transthoracic echocardiography showed the ascending aorta bifurcate to left and right aortic arches, with blood flow from the ascending aorta to bilateral aortic arches. The diagnosis of right side-dominant double aortic arch was made, and the patient's symptom was conceivably related to compression of the trachea due to a vascular ring. This report indicates the potential usefulness of transthoracic echocardiography for noninvasive detection of double aortic arch in adults. © 2017, Wiley Periodicals, Inc.

[Effects of shortened mandibular dental arch on human brain activity during chewing: an fMRI study].

PubMed

Shoi, Kazuhito

2014-03-01

According to the shortened dental arch concept, missing molars should not always be restored with prosthetic treatment. A shortened dental arch with missing molars is associated with a decrease in masticatory function. However, it is not known whether a shortened dental arch influences brain activity during chewing. This study aimed to clarify the effect of posterior arch length of mandibular bilateral distal extension removable partial dentures (RPDs) on brain activity during chewing. Eleven subjects with bilaterally missing mandibular molars (mean age, 66.1 years) participated in the study. RPDs with full dental arch and shortened dental arch were fabricated and brain activity during gum chewing under each dental condition was measured using functional magnetic resonance imaging. Brain activation during gum chewing with the full dental arch was observed in the middle frontal gyrus, primary sensorimotor cortex extending to the premotor cortex, supplementary motor area, putamen, insula and cerebellum. However, activation of the middle frontal gyrus was not observed during gum chewing with the shortened dental arch. The results of this study suggest that human brain activity during chewing in the middle frontal gyrus may be associated with chewing in the presence of the molar region.

Human evaluation in association to the mathematical analysis of arch forms: Two-dimensional study.

PubMed

Zabidin, Nurwahidah; Mohamed, Alizae Marny; Zaharim, Azami; Marizan Nor, Murshida; Rosli, Tanti Irawati

2018-03-01

To evaluate the relationship between human evaluation of the dental-arch form, to complete a mathematical analysis via two different methods in quantifying the arch form, and to establish agreement with the fourth-order polynomial equation. This study included 64 sets of digitised maxilla and mandible dental casts obtained from a sample of dental arch with normal occlusion. For human evaluation, a convenient sample of orthodontic practitioners ranked the photo images of dental cast from the most tapered to the less tapered (square). In the mathematical analysis, dental arches were interpolated using the fourth-order polynomial equation with millimetric acetate paper and AutoCAD software. Finally, the relations between human evaluation and mathematical objective analyses were evaluated. Human evaluations were found to be generally in agreement, but only at the extremes of tapered and square arch forms; this indicated general human error and observer bias. The two methods used to plot the arch form were comparable. The use of fourth-order polynomial equation may be facilitative in obtaining a smooth curve, which can produce a template for individual arch that represents all potential tooth positions for the dental arch. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.

35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED BETWEEN TOWER LEGS, AND ASHLAR MASONRY WALLS AND PYLONS Pen-and-ink drawing by project architect Alfred Eichler, 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

Mesodermal retinoic acid signaling regulates endothelial cell coalescence in caudal pharyngeal arch artery vasculogenesis

PubMed Central

Li, Peng; Pashmforoush, Mohammad; Sucov, Henry M.

2011-01-01

Disruption of retinoic acid signaling causes a variety of pharyngeal arch artery and great vessel defects, as well as malformations in many other tissues, including those derived from the pharyngeal endoderm. Previous studies implied that arch artery defects in the context of defective RA signaling occur secondary to pharyngeal pouch segmentation defects, although this model has never been experimentally verified. In this study, we examined arch artery morphogenesis during mouse development, and the role of RA in this process. We show in normal embryos that the arch arteries form by vasculogenic differentiation of pharyngeal mesoderm. Using various genetic backgrounds and tissue-specific mutation approaches, we segregate pharyngeal arch artery and pharyngeal pouch defects in RA receptor mutants, and show that RA signal transduction only in pharyngeal mesoderm is required for arch artery formation. RA does not control pharyngeal mesodermal differentiation to endothelium, but instead promotes the aggregation of endothelial cells into nascent vessels. Expression of VE-cadherin was substantially reduced in RAR mutants, and this deficiency may underlie the arch artery defects. The consequences of disrupted mesodermal and endodermal RA signaling were restricted to the 4th and 6th arch arteries and to the 4th pharyngeal pouch, respectively, suggesting that different regulatory mechanisms control the formation of the more anterior arch arteries and pouches. PMID:22040871

A Comparative Evaluation of Accuracy of the Dies Affected by Tray Type, Material Viscosity, and Pouring Sequence of Dual and Single Arch Impressions- An In vitro Study

PubMed Central

Kulkarni, Rahul S.; Shah, Rupal J.; Chhajlani, Rahul; Saklecha, Bhuwan; Maru, Kavita

2017-01-01

Introduction The clinician’s skill, impression techniques, and materials play a very important role in recording fine details in an impression for accuracy of fixed partial denture prosthesis. Impression of prepared teeth and of the opposing arch can be recorded simultaneously by dual-arch trays, while the full arch metal trays are used for impressions of prepared teeth in one arch. Aim To measure and compare the accuracy of working dies made from impressions with metal and plastic dual arch trays and metal full arch trays, for two viscosities of impression material and by changing the sequence of pour of working and non-working sides. Materials and Methods A balanced design with independent samples was used to study the three variables (tray type, impression material viscosity, and pouring sequence). An impression made by dual arch trays and single arch trays were divided in to three groups (Group A-plastic dual arch tray, Group B-metal dual arch tray, Group C-full arch metal stock tray). Out of these three groups, two groups (Group A and B) were subdivided in to four subgroups each and one group (Group C) was subdivided in to two subgroups. A sample size of 30 was used in each subgroup yielding a total 300 impressions in three groups or ten subgroups. Impressions were made of a machined circular stainless steel die. All three dimensions (Occlusogingival, Mesiodistal, and Buccolingual) of the working dies as well as stainless steel standard die were measured three times, and the mean was used for the three standard sample values to which all working dies means were compared. Statistical analysis used for this study was a 3-factor analysis of variance with hypothesis testing at α =0.05. Results With respect to the selection of impression material viscosity statistically significant differences were found in the dies for the buccolingual and mesiodistal dimensions. Metal dual arch trays were slightly more accurate in the mesiodistal dimension in comparison to the plastic trays in reference of tray selection and in view of pouring sequence no differences were observed in occlusogingival dimension but in buccolingual and mesiodistal dimensions nonworking side was more accurate. Conclusion The gypsum dies produced from the dual arch impressions were generally smaller in all three dimensions than the stainless steel standard die. Plastic dual-arch trays were more accurate with rigid impression material and there was not statistically significant difference for sequence of pouring. Metal dual-arch trays were more accurate with monophase impression material and working side was more accurate. Stock metal full arch trays were more accurate for monophase impression material. PMID:28571280

Is arch form influenced by sagittal molar relationship or Bolton tooth-size discrepancy?

PubMed

Aldrees, Abdullah M; Al-Shujaa, Abdulmajeed M; Alqahtani, Mohammad A; Aljhani, Ali S

2015-06-26

Orthodontic patients show high prevalence of tooth-size discrepancy. This study investigates the possible association between arch form, clinically significant tooth-size discrepancy, and sagittal molar relationship. Pretreatment orthodontic casts of 230 Saudi patients were classified into one of three arch form types (tapered, ovoid, and square) using digitally scanned images of the mandibular arches. Bolton ratio was calculated, sagittal molar relationship was defined according to Angle classification, and correlations were analyzed using ANOVA, chi-square, and t-tests. No single arch form was significantly more common than the others. Furthermore, no association was observed between the presence of significant Bolton discrepancy and the sagittal molar relationship or arch form. Overall Bolton discrepancy is significantly more prevalent in males. Arch form in a Saudi patient group is independent of gender, sagittal molar relationship, and Bolton discrepancy.

Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study

PubMed Central

D’Souza, Ivor M; Kumar, H. C. Kiran; Shetty, K. Sadashiva

2015-01-01

Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females) were selected who had been treated by rapid maxillary expansion (RME) using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA). Pretreatment (T1), postexpansion (T2), and posttreatment (T3) dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1–T2, T2–T3 and T1–T3 were determined for each patient. The mean difference between T1–T2, T2–T3 and T1–T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar regions. Results: The intercanine arch width increased by 2.9 mm, inter first premolar width increased by 3.2 mm, inter second premolar width increased by 4.6 mm, intermolar width increased by 4.4 mm, arch perimeter increased by 3.2 mm, arch length decreased by 1.8 mm from pretreatment to posttreatment. There is a strong positive correlation of arch perimeter with intercanine width (r2 = 0.99), interpremolar width (r2 = 0.99) and intermolar width (r2 = 0.98), indicating that there is a significant increase in arch perimeter with increase in arch width at the canine, premolars and molar regions. Conclusion: Findings of this study demonstrate that there was a significant increase in the intercanine, inter first premolar, inter second premolar intermolar arch width and arch perimeter from pretreatment to postexpansion, which was stable at the end of fixed mechanotherapy (PEA). There was a nonsignificant decrease in arch length from pretreatment to postexpansion that further decreased nonsignificantly from postexpansion to posttreatment. PMID:25684912

Dental arch dimensions, form and tooth size ratio among a Saudi sample

PubMed Central

Omar, Haidi; Alhajrasi, Manar; Felemban, Nayef; Hassan, Ali

2018-01-01

Objectives: To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters. Methods: This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton’s ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016. Results: Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p<0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton’s anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton’s overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton’s ratio. Conclusion: The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton’s anterior teeth ratio than in overall ratio. PMID:29332114

Preliminary Design of ArchE: A Software Architecture Design Assistant

DTIC Science & Technology

2003-09-01

This report presents a procedure for moving from a set of quality attribute scenarios to an architecture design that satisfies those scenarios. This...procedure is embodied in a preliminary design for an architecture design assistant named ArchE (Architecture Expert), which will be implemented on a

Laboratory Evidence That Line-Tied Toroidal Magnetic Fields Can Suppress Loss-of-Equilibrium Flux Rope Eruptions in the Solar Corona

NASA Astrophysics Data System (ADS)

Myers, C. E.; Yamada, M.; Belova, E.; Ji, H.; Yoo, J.; Fox, W. R., II; Jara-Almonte, J.

2014-12-01

Loss-of-equilibrium mechanisms such as the ideal torus instability [Kliem & Török, Phys. Rev. Lett. 96, 255002 (2006)] are predicted to drive arched flux ropes in the solar corona to erupt. In recent line-tied flux rope experiments conducted in the Magnetic Reconnection Experiment (MRX), however, we find that quasi-statically driven flux ropes remain confined well beyond the predicted torus instability threshold. In order to understand this behavior, in situ measurements from a 300 channel 2D magnetic probe array are used to comprehensively analyze the force balance between the external (potential) and internal (plasma-generated) magnetic fields. We find that forces due to the line-tied toroidal magnetic field, which are not included in the basic torus instability theory, can play a major role in preventing eruptions. The dependence of these toroidal magnetic forces on various potential field and flux rope parameters will be discussed. This research is supported by DoE Contract Number DE-AC02-09CH11466 and by the NSF/DoE Center for Magnetic Self-Organization (CMSO).

Laboratory evidence that line-tied tension forces can suppress loss-of-equilibrium flux rope eruptions in the solar corona

NASA Astrophysics Data System (ADS)

Myers, C. E.; Yamada, M.; Belova, E.; Ji, H.; Yoo, J.; Fox, W.; Jara-Almonte, J.; Gao, L.

2014-10-01

Loss-of-equilibrium mechanisms such as the ideal torus instability [Kliem & Török, Phys. Rev. Lett. 96, 255002 (2006)] are predicted to drive arched flux ropes in the solar corona to erupt. In recent line-tied flux rope experiments conducted in the Magnetic Reconnection Experiment (MRX), however, we find that quasi-statically driven flux ropes remain confined well beyond the predicted torus instability threshold. In order to understand this behavior, in situ measurements from a 300 channel 2D magnetic probe array are used to comprehensively analyze the force balance between the external (vacuum) and internal (plasma-generated) magnetic fields. We find that the line-tied tension force--a force that is not included in the basic torus instability theory--plays a major role in preventing eruptions. The dependence of this tension force on various vacuum field and flux rope parameters will be discussed. This research is supported by DoE Contract Number DE-AC02-09CH11466 and by the NSF/DoE Center for Magnetic Self-Organization (CMSO).

Anchorage condition during canine retraction using transpalatal arch with continuous and segmented arch mechanics.

PubMed

Alhadlaq, Adel; Alkhadra, Thamer; El-Bialy, Tarek

2016-05-01

To compare anchorage condition in cases in which transpalatal arch was used to enhance anchorage in both continuous and segmented arch techniques. Twenty cases that required first premolar extraction for orthodontic treatment and transpalatal arch to enhance anchorage were included in this study. Ten cases were treated using the continuous arch technique, while the other 10 cases were treated using 0.019 × 0.025-inch TMA T-loops with posterior anchorage bend according to the Burstone and Marcotte description. Lateral cephalometric analysis of before and after canine retraction was performed using Ricketts analysis to measure the anteroposterior position of the upper first molar to the vertical line from the Pt point. Data were analyzed using an independent sample t-test. There was a statistically significant forward movement of the upper first molar in cases treated by continuous arch mechanics (4.5 ± 3.0 mm) compared with segmented arch mechanics (-0.7 ± 1.4 mm; P  =  .01). The posterior anchorage bend to T-loop used to retract the maxillary canine can enhance anchorage during maxillary canine retraction.

Relationship between lumbar changes and modifications in the plantar arch in women with low back pain

PubMed Central

Borges, Cláudia dos Santos; Fernandes, Luciane Fernanda Rodrigues Martinho; Bertoncello, Dernival

2013-01-01

OBJECTIVE : Evaluate the probable relationship among plantar arch, lumbar curvature, and low back pain. METHODS : Fifteen healthy women were assessed taking in account personal data and anthropometric measurements, photopodoscopic evaluation of the plantar arch, and biophotogrammetric postural analysis of the patient (both using the SAPO software), as well as evaluation of lumbar pain using a Visual Analog Scale (VAS). The average age of the participants was 30.45 (±6.25) years. RESULTS : Of the feet evaluated, there were six individuals with flat feet, five with high arch, and four with normal feet. All reported algic syndrome in the lumbar spine, with the highest VAS values for the volunteers with high arch. Correlation was observed between the plantar arch and the angle of the lumbar spine (r = -0.71, p = 0.004) Conclusion: High arch was correlated with more intense algic syndrome, while there was moderate positive correlation between flat foot and increased lumbar curvature, and between high arch and lumbar correction. Level of Evidence IV. Case Series. PMID:24453656

A Foot-Arch Parameter Measurement System Using a RGB-D Camera.

PubMed

Chun, Sungkuk; Kong, Sejin; Mun, Kyung-Ryoul; Kim, Jinwook

2017-08-04

The conventional method of measuring foot-arch parameters is highly dependent on the measurer's skill level, so accurate measurements are difficult to obtain. To solve this problem, we propose an autonomous geometric foot-arch analysis platform that is capable of capturing the sole of the foot and yields three foot-arch parameters: arch index (AI), arch width (AW) and arch height (AH). The proposed system captures 3D geometric and color data on the plantar surface of the foot in a static standing pose using a commercial RGB-D camera. It detects the region of the foot surface in contact with the footplate by applying the clustering and Markov random field (MRF)-based image segmentation methods. The system computes the foot-arch parameters by analyzing the 2/3D shape of the contact region. Validation experiments were carried out to assess the accuracy and repeatability of the system. The average errors for AI, AW, and AH estimation on 99 data collected from 11 subjects during 3 days were -0.17%, 0.95 mm, and 0.52 mm, respectively. Reliability and statistical analysis on the estimated foot-arch parameters, the robustness to the change of weights used in the MRF, the processing time were also performed to show the feasibility of the system.

Analysis of rotational and sliding collapse modes of masonry arches via Durand-Claye's method

NASA Astrophysics Data System (ADS)

Barsotti, Riccardo; Aita, Danila; Bennati, Stefano

2017-11-01

In this paper the mechanical behavior of circular and pointed masonry arches subject to their own weight is examined in order to determine their collapse modes. Different arch's shapes and thicknesses are considered; the influence of the friction coefficient on the arch collapse is analyzed as well. The safety level of arches is investigated by suitably reworking in semi-analytical form the stability area graphical method proposed by a renowned 19th century French scholar, Durand-Claye. Our analysis enables accounting for any given eccentricity of the thrust at the crown; furthermore, also the strength of masonry is taken into account. According to Durand-Claye's method, the arch is safe if along any given joint both the bending moment and the shear force do not exceed some given limit values. It is shown that attainment of a limit condition according to Durand-Claye corresponds to the onset of a collapse mechanism characterized by either relative rotation or sliding between masonry units. All possible symmetric collapse modes for an arch are thoroughly described. As it was expected, pointed and circular arches show different collapse behaviors. Limit values of arch thickness and friction coefficient are assessed. The results obtained are compared with those given by Michon in 1857.

Pregnancy Leads to Lasting Changes in Foot Structure

PubMed Central

Segal, Neil A.; Boyer, Elizabeth R.; Teran-Yengle, Patricia; Glass, Natalie; Hillstrom, Howard J.; Yack, H. John

2013-01-01

Objective Women are disproportionately affected by musculoskeletal disorders. Parous women appear to be at particularly elevated risk for structural and functional changes in the lower limbs. The combination of increased weight on joints with potentially greater laxity during pregnancy could lead to permanent structural changes in feet. Although arches may become lax during pregnancy, it is unknown whether changes persist. The objective of this study was to determine whether arch height loss persists postpartum. Design Forty-nine women completed this longitudinal study. Static and dynamic arch measurements were collected in first-trimester and at 19 weeks postpartum. Linear mixed models were used to determine whether outcome measures significantly changed overall or by parity. Results Arch height and rigidity index significantly decreased, with concomitant increases in foot length and arch drop. The first pregnancy accounted for the reduction in arch rigidity and increases in foot length and arch drop. No changes were detected in the center of pressure excursion index. Conclusions Pregnancy appears to be associated with a permanent loss of arch height and the first pregnancy may be the most significant. These changes in the feet could contribute to the increased risk for musculoskeletal disorders in women. Further research should assess the efficacy of rehabilitative interventions for prevention of pregnancy-related arch drop. PMID:23117270

A Foot-Arch Parameter Measurement System Using a RGB-D Camera

PubMed Central

Kong, Sejin; Mun, Kyung-Ryoul; Kim, Jinwook

2017-01-01

The conventional method of measuring foot-arch parameters is highly dependent on the measurer’s skill level, so accurate measurements are difficult to obtain. To solve this problem, we propose an autonomous geometric foot-arch analysis platform that is capable of capturing the sole of the foot and yields three foot-arch parameters: arch index (AI), arch width (AW) and arch height (AH). The proposed system captures 3D geometric and color data on the plantar surface of the foot in a static standing pose using a commercial RGB-D camera. It detects the region of the foot surface in contact with the footplate by applying the clustering and Markov random field (MRF)-based image segmentation methods. The system computes the foot-arch parameters by analyzing the 2/3D shape of the contact region. Validation experiments were carried out to assess the accuracy and repeatability of the system. The average errors for AI, AW, and AH estimation on 99 data collected from 11 subjects during 3 days were −0.17%, 0.95 mm, and 0.52 mm, respectively. Reliability and statistical analysis on the estimated foot-arch parameters, the robustness to the change of weights used in the MRF, the processing time were also performed to show the feasibility of the system. PMID:28777349

Relationship between vertical facial patterns and dental arch form in class II malocclusion.

PubMed

Grippaudo, Cristina; Oliva, Bruno; Greco, Anna Lucia; Sferra, Simone; Deli, Roberto

2013-11-07

The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasion/mandibular plane angle (SN-MP)) in skeletal class II untreated patients. A sample of 73 Caucasians patients with untreated skeletal class II in permanent dentition was divided into three groups according to the values of the angle SN-MP. An evaluation of the arch form was performed by angular and linear relation values on each patient. Regression analysis was used to determine the statistical significance of the relationships between SN-MP angle and dental arch form. The differences among the three groups were analyzed for significance using a variance analysis. A decrease of the upper arch transversal diameters in high SN-MP angle patients and an increase in low angle SN-MP ones (P<0.05) were shown. Result analysis showed a change in upper arch shape, with a smaller intercanine width in patients with high SN-MP angle and a greater one in low angle patients. As SN-MP angle increased, the upper arch form tended to be narrower. No statistically significant difference in mandibular arch form among the three groups was found, except the angle value related to incisors position. The results showed the association between the upper dental arch form and the vertical facial pattern. On the contrary, the lower arch form was not related to the mandibular divergence.

Nonlinear Buckling Analysis of Functionally Graded Graphene Reinforced Composite Shallow Arches with Elastic Rotational Constraints under Uniform Radial Load.

PubMed

Huang, Yonghui; Yang, Zhicheng; Liu, Airong; Fu, Jiyang

2018-05-28

The buckling behavior of functionally graded graphene platelet-reinforced composite (FG-GPLRC) shallow arches with elastic rotational constraints under uniform radial load is investigated in this paper. The nonlinear equilibrium equation of the FG-GPLRC shallow arch with elastic rotational constraints under uniform radial load is established using the Halpin-Tsai micromechanics model and the principle of virtual work, from which the critical buckling load of FG-GPLRC shallow arches with elastic rotational constraints can be obtained. This paper gives special attention to the effect of the GPL distribution pattern, weight fraction, geometric parameters, and the constraint stiffness on the buckling load. The numerical results show that all of the FG-GPLRC shallow arches with elastic rotational constraints have a higher buckling load-carrying capacity compared to the pure epoxy arch, and arches of the distribution pattern X have the highest buckling load among four distribution patterns. When the GPL weight fraction is constant, the thinner and larger GPL can provide the better reinforcing effect to the FG-GPLRC shallow arch. However, when the value of the aspect ratio is greater than 4, the flakiness ratio is greater than 103, and the effect of GPL's dimensions on the buckling load of the FG-GPLRC shallow arch is less significant. In addition, the buckling model of FG-GPLRC shallow arch with elastic rotational constraints is changed as the GPL distribution patterns or the constraint stiffness changes. It is expected that the method and the results that are presented in this paper will be useful as a reference for the stability design of this type of arch in the future.

The association of foot arch posture and prior history of shoulder or elbow surgery in elite-level baseball pitchers.

PubMed

Feigenbaum, Luis A; Roach, Kathryn E; Kaplan, Lee D; Lesniak, Bryson; Cunningham, Sean

2013-11-01

Case-control. The specific aim of this study was to examine the association between abnormal foot arch postures and a history of shoulder or elbow surgery in baseball pitchers. Pitching a baseball generates forces throughout the musculoskeletal structures of the upper and lower limbs. Structures such as the longitudinal arch of the foot are adaptable to stresses over time. Repeated pitching-related stresses may contribute to acquiring abnormal foot arch postures. Inversely, congenitally abnormal foot arch posture may lead to altered stresses of the upper limb during pitching. A convenience sample of 77 pitchers was recruited from a Division I university team and a professional baseball franchise. Subjects who had a history of shoulder or elbow surgery to the pitching arm were classified as cases. Subjects who met the criteria for classification of pes planus or pes cavus based on longitudinal arch angle were classified as having abnormal foot arch posture. Odds ratios were calculated to examine the association between abnormal foot arch posture and pitching-arm injury requiring surgery. Twenty-three subjects were classified as cases. The odds of being a case were 3.4 (95% confidence interval: 1.2, 9.6; P = .02) times greater for subjects with abnormal foot arch posture and 2.9 (95% confidence interval: 1.0, 8.1; P = .04) times greater for subjects with abnormal foot posture on the lunge leg. Abnormal foot arch posture and a surgical history in the pitching shoulder or elbow may be associated. Because the foot and its arches are adaptable and change over time, the pathomechanics of this association should be further explored.

Abnormal aortic arch morphology in Turner syndrome patients is a risk factor for hypertension.

PubMed

De Groote, Katya; Devos, Daniël; Van Herck, Koen; Demulier, Laurent; Buysse, Wesley; De Schepper, Jean; De Wolf, Daniël

2015-09-01

Hypertension in Turner syndrome (TS) is a multifactorial, highly prevalent and significant problem that warrants timely diagnosis and rigorous treatment. The objective of this study was to investigate the association between abnormal aortic arch morphology and hypertension in adult TS patients. This was a single centre retrospective study in 74 adult TS patients (age 29.41 ± 8.91 years) who underwent a routine cardiac MRI. Patients were assigned to the hypertensive group (N = 31) if blood pressure exceeded 140/90 mmHg and/or if they were treated with antihypertensive medication. Aortic arch morphology was evaluated on MRI images and initially assigned as normal (N = 54) or abnormal (N = 20), based on the curve of the transverse arch and the distance between the left common carotid-left subclavian artery. We additionally used a new more objective method to describe aortic arch abnormality in TS by determination of the relative position of the highest point of the transverse arch (AoHP). Logistic regression analysis showed that hypertension is significantly and independently associated with age, BMI and abnormal arch morphology, with a larger effect size for the new AoHP method than for the classical method. TS patients with hypertension and abnormal arch morphology more often had dilatation of the ascending aorta. There is a significant association between abnormal arch morphology and hypertension in TS patients, independent of age and BMI, and not related to other structural heart disease. We suggest that aortic arch morphology should be included in the risk stratification for hypertension in TS and propose a new quantitative method to express aortic arch morphology.

Zebrafish hox paralogue group 2 genes function redundantly as selector genes to pattern the second pharyngeal arch.

PubMed

Hunter, Michael P; Prince, Victoria E

2002-07-15

The pharyngeal arches are one of the defining features of the vertebrates, with the first arch forming the mandibles of the jaw and the second forming jaw support structures. The cartilaginous elements of each arch are formed from separate migratory neural crest cell streams, which derive from the dorsal aspect of the neural tube. The second and more posterior crest streams are characterized by specific Hox gene expression. The zebrafish has a larger overall number of Hox genes than the tetrapod vertebrates, as the result of a duplication event in its lineage. However, in both zebrafish and mouse, there are just two members of Hox paralogue group 2 (PG2): Hoxa2 and Hoxb2. Here, we show that morpholino-mediated "knock-down" of both zebrafish Hox PG2 genes results in major defects in second pharyngeal arch cartilages, involving replacement of ventral elements with a mirror-image duplication of first arch structures, and accompanying changes to pharyngeal musculature. In the mouse, null mutants of Hoxa2 have revealed that this single Hox gene is required for normal second arch patterning. By contrast, loss-of-function of either zebrafish Hox PG2 gene individually has no phenotypic consequence, showing that these two genes function redundantly to confer proper pattern to the second pharyngeal arch. We have also used hoxb1a mis-expression to induce localized ectopic expression of zebrafish Hox PG2 genes in the first arch; using this strategy, we find that ectopic expression of either Hox PG2 gene can confer second arch identity onto first arch structures, suggesting that the zebrafish Hox PG2 genes act as "selector genes." 2002 Elsevier Science (USA).

Comparison between rapid and mixed maxillary expansion through an assessment of arch changes on dental casts.

PubMed

Grassia, Vincenzo; d'Apuzzo, Fabrizia; Jamilian, Abdolreza; Femiano, Felice; Favero, Lorenzo; Perillo, Letizia

2015-01-01

Aim of this retrospective observational study was to compare upper and lower dental changes in patients treated with Rapid Maxillary Expansion (RME) and Mixed Maxillary Expansion (MME), assessed by dental cast analysis. Treatment groups consisted of 42 patients: the RME group (n = 21) consisted of 13 female and 8 male subjects with the mean age of 8.8 years ± 1.37 at T0 and 9.6 years ± 1.45 at T1; the MME group (n = 21) consisted of 12 female and 9 male patients with a mean age of 8.9 years ± 2.34 at T0 and 10.5 years ± 2.08 at T1. The upper and lower arch analysis was performed on four dental bilateral landmarks, on upper and lower casts; also upper and lower arch depths were measured. The groups were compared using independent sample t-test to estimate dental changes in upper and lower arches. Before expansion treatment (T0), the groups were similar for all examined variables (p>0.05). In both RME and MME group, significant increments in all the variables for maxillary and mandibular arch widths were observed after treatment. No significant differences in maxillary and mandibular arch depths were observed at the end of treatment in both groups. An evaluation of the changes after RME and MME (T1) showed statistically significant differences in mandibular arch depth (p<0.001) and maxillary intercanine widths (p<0.05). Differences in maxillary arch depth and arch width measurements were not significant. RME and MME can be considered two effective treatment options to improve transverse arch dimensions and gain space in the dental arches. A greater lower arch expansion was observed in the MME group, which might be attributed to the "lip bumper effects" observed in the MME protocol.

Aortic arch repair under moderate hypothermic circulatory arrest with or without antegrade cerebral perfusion based on the extent of repair

PubMed Central

Park, Sung Jun; Jeon, Bo Bae; Kim, Hee Jung

2018-01-01

Background For aortic-arch repair, moderate hypothermic circulatory arrest (HCA) have shown favorable outcomes over conventional deep HCA when coupled with antegrade cerebral perfusion (ACP); however, recent studies have shown that ACP may not be essential when circulatory arrest time is less than 30 minutes. This study aims to evaluate the stratified arch repair strategy of moderate HCA with or without ACP based on the extent of procedure. Methods Consecutive 138 patients (63 female; mean age, 60.2±15.7 years) undergoing open arch repair due to acute aortic syndrome (n=69) or chronic aneurysm (n=69) from January 2012 through April 2017 were enrolled in this study. Stratified neuroprotective strategy was employed according to the extent of repair: hemi-arch repair (n=93) was performed under moderated HCA alone and total-arch repair (n=45) under moderate HCA combined with unilateral ACP. Results Median total circulatory arrest and total procedural times were 8.0 minutes [interquartile range (IQR), 6.0–10.0] and 233.0 minutes (IQR, 196.0–290.0 minutes), respectively in the hemi-arch group, and 25.0 minutes (IQR, 12.0–33.0 minutes) and 349.0 minutes (IQR, 276.0–406.0 minutes), respectively in the total-arch group. Early mortality occurred in 2 patients (1.4%) who underwent hemi-arch repair for acute aortic dissection. There was no permanent neurological injury, but 2 cases (1.4%) of temporary neurologic deficit in the hemi-arch group. Other complications included re-exploration for bleeding in 6 (4.3%), postoperative extracorporeal life support in 5 (3.6%) and new-dialysis in 6 (4.3%). Conclusions Stratified cerebral perfusion strategy using moderate hypothermia for aortic-arch surgery based on the extent of arch repair showed satisfactory safety and reasonable efficiency. PMID:29707342

[Persistence of the 5th aortic arch associated with interruption of the aortic arch].

PubMed

Houssa, Mahdi Ait; Atmani, Noureddine; Bamous, Mehdi; Abdou, Abdessamad; Nya, Fouad; Seghrouchni, Anis; Amahzoune, Brahim; El Bekkali, Youssef; Drissi, Mohamed; Boulahya, Abdelatif

2017-01-01

We report a case of persistence of the 5th aortic arch associated with total interruption of the aortic arch. This clinical case shows the diagnostic pitfall of the persistence of the 5th aortic arch and its beneficial hemodynamic effect. Preoperative clinical picture was misleading, due to the persistence of femoral pulses and clinical signs of left-to-right shunt via a wide ductus arteriosus. The diagnosis was intraoperatively adjusted on the basis of blood pressure monitoring using catheter placed into the femoral artery.

Ball motion and sliding friction in an arched outer-race ball bearing

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1974-01-01

The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is analyzed. Fatigue life evaluations were made. The analysis is applied to a 150-millimeter-bore ball bearing. The results indicated that for high-speed light-load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be optimal. Also, for an arched bearing a considerable amount of spinning occurs at the outer-race contacts.

Double Aortic Arch With Previously Undescribed Head and Neck Vessel Branching.

PubMed

Hashemi, Sassan; Parks, W James; Sallee, Denver; Slesnick, Timothy

2017-04-01

Vascular ring in the form of a double aortic arch is a rare anomaly that can cause airway compression. It occasionally occurs with unusual head and neck vessel branching. A 5-year-old boy with chronic respiratory symptoms was referred because of a tracheal indentation on his chest x-ray. Magnetic resonance imaging showed a double aortic arch with arch origins of a common carotid, vertebral, and subclavian on the right and internal and external carotids, vertebral, and subclavian arteries on the left. Our case represents, to our knowledge, the first report of a double aortic arch with 7 separate vessels arising from the transverse arches. Copyright © 2016 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

The Role of Arch Compression and Metatarsophalangeal Joint Dynamics in Modulating Plantar Fascia Strain in Running

PubMed Central

McDonald, Kirsty A.; Stearne, Sarah M.; Alderson, Jacqueline A.; North, Ian; Pires, Neville J.; Rubenson, Jonas

2016-01-01

Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ) excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike) performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert), and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption) and the arch (energy production during recoil). This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running. PMID:27054319

The effect of demographic features on aortic arch anatomy and its role in the etiology of cerebrovascular disease.

PubMed

İnanç, Yılmaz; İnanç, Yusuf; Ay, Halil

2018-01-01

The aim of this study was to retrospectively evaluate the distribution of aortic arches, the relationship with demographic characteristics, and the results of carotid and vertebral artery stenting procedures in patients diagnosed with cerebrovascular disease through the intra-arterial digital subtraction angiography (DSA) technique. A retrospective examination was performed on 288 patients diagnosed with cerebrovascular disease, who underwent DSA in the Department of Neurology of Gaziantep University Medical Faculty and Kahramanmaraş¸ Sütçü Imam University Medical Faculty. The patients were examined in respect of demographic features and aortic arch anatomic structure characteristics. All demographic characteristics, DSA, carotid, and vertebral artery stent results were recorded. The patients comprised 60.1% males and 39.9% females with a mean age of 58.25 years. Type 2 aortic arch was found in 175 (60.7%) patients, Type 2 aortic arch in 99 (34.3%) patients, and Type 3 aortic arch in 14 (4.8%) patients. The right carotid artery stenosis rate was found to be higher in patients with Type 2 aortic arch ( P =0.013). When the patients were evaluated according to the presence of a bovine arch, there was no significant difference in terms of age, carotid, and vertebral artery lesions ( P >0.05). The aortic arch and its branching properties were not found to have a direct effect on increased risk of cerebrovascular disease or stenting rates. This study can be considered to raise awareness for new studies to demonstrate the effect of aortic arch anatomic differences on cerebrovascular diseases.

The effect of demographic features on aortic arch anatomy and its role in the etiology of cerebrovascular disease

PubMed Central

İnanç, Yılmaz; İnanç, Yusuf; Ay, Halil

2018-01-01

Purpose The aim of this study was to retrospectively evaluate the distribution of aortic arches, the relationship with demographic characteristics, and the results of carotid and vertebral artery stenting procedures in patients diagnosed with cerebrovascular disease through the intra-arterial digital subtraction angiography (DSA) technique. Methods A retrospective examination was performed on 288 patients diagnosed with cerebrovascular disease, who underwent DSA in the Department of Neurology of Gaziantep University Medical Faculty and Kahramanmaraş¸ Sütçü Imam University Medical Faculty. The patients were examined in respect of demographic features and aortic arch anatomic structure characteristics. All demographic characteristics, DSA, carotid, and vertebral artery stent results were recorded. Results The patients comprised 60.1% males and 39.9% females with a mean age of 58.25 years. Type 2 aortic arch was found in 175 (60.7%) patients, Type 2 aortic arch in 99 (34.3%) patients, and Type 3 aortic arch in 14 (4.8%) patients. The right carotid artery stenosis rate was found to be higher in patients with Type 2 aortic arch (P=0.013). When the patients were evaluated according to the presence of a bovine arch, there was no significant difference in terms of age, carotid, and vertebral artery lesions (P>0.05). Conclusion The aortic arch and its branching properties were not found to have a direct effect on increased risk of cerebrovascular disease or stenting rates. This study can be considered to raise awareness for new studies to demonstrate the effect of aortic arch anatomic differences on cerebrovascular diseases. PMID:29302189

Effect of impeded medial longitudinal arch drop on vertical ground reaction force and center of pressure during static loading.

PubMed

Chen, Shing-Jye; Gielo-Perczak, Krystyna

2011-01-01

Arch supports commonly used to alleviate foot pain can impede the normal drop of medial longitudinal arch (MLA) thereby altering its function. The purpose of the study was to examine the effect of using arch supports on vertical ground reaction force (GRF) and center of pressure (COP) during simulated midstance while the foot was statically loaded. Ten healthy young subjects were recruited. Two dimensional (2D) analysis of the MLA was captured for both barefoot (BF) and arch support conditions before and after loading via a custom made weight loading apparatus. The foot was loaded and positioned to simulate the midstance phase of walking. Two-dimensional reflective markers demarcated the MLA and captured with the loaded foot on a force platform. The impeded MLA drop was compared between the unloaded BF, loaded BF and loaded arch support conditions. The vertical GRF, the anterior-posterior and the medial-lateral COP displacements were also measured in response to the impeded MLA by the arch supports. The arch supports impeded the MLA drop (p<0.05) and shifted the COP toward the medial side (p<0.05), specifically for the rearfoot (calcaneal segment region), but no changes were determined for the vertical GRF (p>0.05). The impedance of MLA drop by the arch support altered the pattern of the ML COP shift in the rearfoot region. The use of arch supports may not relieve painful foot conditions that are associated with excessive calcaneal eversion indicated by altering COP shifts in localized foot regions.

The Role of Arch Compression and Metatarsophalangeal Joint Dynamics in Modulating Plantar Fascia Strain in Running.

PubMed

McDonald, Kirsty A; Stearne, Sarah M; Alderson, Jacqueline A; North, Ian; Pires, Neville J; Rubenson, Jonas

2016-01-01

Elastic energy returned from passive-elastic structures of the lower limb is fundamental in lowering the mechanical demand on muscles during running. The purpose of this study was to investigate the two length-modulating mechanisms of the plantar fascia, namely medial longitudinal arch compression and metatarsophalangeal joint (MPJ) excursion, and to determine how these mechanisms modulate strain, and thus elastic energy storage/return of the plantar fascia during running. Eighteen runners (9 forefoot and 9 rearfoot strike) performed three treadmill running trials; unrestricted shod, shod with restricted arch compression (via an orthotic-style insert), and barefoot. Three-dimensional motion capture and ground reaction force data were used to calculate lower limb kinematics and kinetics including MPJ angles, moments, powers and work. Estimates of plantar fascia strain due to arch compression and MPJ excursion were derived using a geometric model of the arch and a subject-specific musculoskeletal model of the plantar fascia, respectively. The plantar fascia exhibited a typical elastic stretch-shortening cycle with the majority of strain generated via arch compression. This strategy was similar in fore- and rear-foot strike runners. Restricting arch compression, and hence the elastic-spring function of the arch, was not compensated for by an increase in MPJ-derived strain. In the second half of stance the plantar fascia was found to transfer energy between the MPJ (energy absorption) and the arch (energy production during recoil). This previously unreported energy transfer mechanism reduces the strain required by the plantar fascia in generating useful positive mechanical work at the arch during running.

Origin and structural development of the LaSalle Arch, Louisiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawless, P.N.

1990-05-01

The LaSalle arch is a basement high separating the Louisiana and Mississippi interior salt basins. Using reflection seismic data, an area located on the southern end of the LaSalle arch was shown to be composed of relict Paleozoic continental crust that was left behind and partially rifted during the breakup of Pangea during the Triassic. Rifting preferentially occurred to the north of a Paleozoic thrust fault nose, and crustal extension took place in a northeast-southwest direction. The LaSalle arch, as seen in post-Triassic stratigraphy, formed by a two-part process. The western limb developed syndepositionally due to differential subsidence, and themore » eastern limb developed due to relative regional tilting to the east after deposition of the Claibornian Sparta Formation. The LaSalle arch acted as only a minor impediment to sediment transport with a very low relief except during the Tayloran Stage of the Upper Cretaceous. A single truncational unconformity in post-Triassic stratigraphy is present in the Taylora Demopolis Formation, indicating a period of relatively major uplift by the LaSalle arch. This contrast, with the Sabine arch in eastern Texas; the Sabine arch experienced uplift during the Eagle Fordian and Sabinian stages. A recently proposed hypothesis calling for overthrusting in the Western Cordillera as the mechanism for uplift on the Sabine arch cannot explain movement of the LaSalle arch because horizontal stress would predict synchronous uplift of basement highs. A more satisfactory uplift mechanism calls upon lateral heat flow from the mantle as the driving force for uplift.« less

Body weight and the medial longitudinal foot arch: high-arched foot, a hidden problem?

PubMed

Woźniacka, R; Bac, A; Matusik, S; Szczygieł, E; Ciszek, E

2013-05-01

This study had two objectives. First, to determine the prevalence of hollow (high-arched) and flat foot among primary school children in Cracow (Poland). Second, to evaluate the relationship between the type of medial longitudinal arch (MLA; determined by the Clarke's angle) and degree of fatness. The prevalence of underweight, overweight, and obesity was determined by means of IOTF cut-offs with respect to age and gender. A sample of 1,115 children (564 boys and 551 girls) aged between 3 and 13 years was analyzed. In all age groups, regardless of gender, high-arched foot was diagnosed in the majority of children. A distinct increase in the number of children with high-arched foot was observed between 7- and 8-year olds. Regardless of the gender, high-arched foot was more common among underweight children. In the group of obese children, the biggest differences were attributed to gender. High-arched foot was the most frequently observed among boys. In all gender and obesity level groups, the flat foot was more common among boys than among girls. High-arched foot is the most common foot defect among children 3-13 years old regardless of gender. Flat foot is least frequently observed in children 3-13 years old. A statistic correlation between MLA and adiposity is observed. Stronger correlation is observed among girls.

Effect of using truncated versus total foot length to calculate the arch height ratio.

PubMed

McPoil, Thomas G; Cornwall, Mark W; Vicenzino, Bill; Teyhen, Deydre S; Molloy, Joseph M; Christie, Douglas S; Collins, Natalie

2008-12-01

The purpose of this study was to determine the arch height ratio in a large cohort of subjects as well as to assess the reliability and validity of the foot measurements utilized in the study. Eight hundred and fifty subjects, 393 women and 457 men, consented to participate in the study. The dorsal arch height, total foot length, and the truncated foot length were used to calculate two variations of the arch height ratio. In addition to determining within- and between-rater measurement reliability, radiographs were used to establish validity. The truncated arch height ratio can be estimated using the total foot length, unless toe deformities are present in the individual being assessed. All foot measurements had high levels of intra- and inter-rater reliability and the validity of measuring the dorsal arch height while standing with equal weight on both feet was established. This investigation provides normative values from a large cohort of healthy female and male subjects for two variations of the arch height ratio. The arch height ratio is a reliable and valid measurement that may prove useful to clinicians and researchers for the classification of foot posture.

Effect of arch length on the functional well-being of dentate adults.

PubMed

Montero, J; Bravo, M; Hernández, L A; Dib, A

2009-05-01

The aim of this study was to assess the influence of arch length and the number of occlusal units on the oral functions and general satisfaction perceived by dentate adults without dentures who had all their aesthetic units intact. We performed an epidemiological study at randomly chosen health centres on populations of adults without dentures. The subjects (n = 624) were classified as complete dental arch (CDA), interrupted dental arch (IDA) or shortened dental arches (SDA), depending on the length and continuity of the dental arches. We gathered clinical data and data on functional ability and oral satisfaction, plotting them on a scale of 0-10. The individuals with a shortened dental arch were found to have longer-lasting, more frequent and more severe functional limitations upon chewing, smiling and speaking than those with a complete or interrupted arch. The prevalance rate ratio (95% CI) of functional limitations in the SDA group was higher than in the aggregated CDA-IDA group, the values ranging between 1.56 (1.22-12.01) as regards chewing and 2.35 (1.45-3.85) in the case of smiling. However, in general all groups were satisfied with their oral status.

Influence of shovel-shaped incisors on the dental arch crowding in Mongolian females.

PubMed

Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsukada, Shin-ichi; Uzuka, Satoshi; Nakahara, Rizako; Nakahara, Sen

2009-08-01

The aim of this study was to investigate the influences of shovel-shaped incisors on the dental arch crowding in the samples of modern young female adult Mongolians (belonging to the Khalkha-Mogol grouping) ranged between 18.5 and 25.0 years, with a mean age of 20.7 years. Materials in this study comprised of 33 dental casts. Plaster replicas of the A.S.U. system plaques were used to facilitate standardization in scoring and classify shoveling regarding both upper central and lateral incisors. Dimensions of the dental arch namely, overjet, overbite, arch depth, arch width and irregularity index were measured. The correlation between the shovel shape of the central incisor and the lateral incisor was highly significant. Significantly relations were found between the grades of shoveling and the mesiodistal diameters of upper first molars and lower incisors. Positive correlation was admitted between the shoveling and upper arch depth anterior, and upper arch depth. It may be considered that the grades of shoveling are indirectly related with upper and/or lower anterior crowding. Although crowding is looks like an expression of disharmony between teeth and alveolar arch, it may be caused by multiple etiologic factors interacted directly and/or indirectly.

Novel Arch Bar Fabricated With a Computer-Aided Design and Three-Dimensional Printing: A Feasibility Study.

PubMed

He, Wei; Sun, Yuchun; Tian, Kaiyue; Xie, Xiaoyan; Wang, Xiaoxia; Li, Zili

2015-11-01

The aim of the present study was to evaluate the feasibility of the design and fabrication of a novel arch bar using 3-dimensional printing. Furthermore, the study assessed its use in a preliminary clinical study of intermaxillary fixation. Seven patients who met the inclusion criteria were enrolled in the present study. Plaster dental casts were created of each patient and scanned using cone-beam computed tomography to obtain digital casts. Computer-aided design software was then used to complete the virtual building of the arch bars, which were manufactured using 3-dimensional printing and a cobalt-chrome alloy. The clinical results were observed after the arch bars were fixed to the dentition with steel wires. The arch bar contacted the dentition with a "surface-to-surface" pattern. The utility of these novel arch bars was verified by successfully fitting them to the dental arches of the patients. All the patients achieved their desired occlusion. The results of the present study have illustrated that this digital method is feasible for constructing a novel arch bar, showing promise for clinical use. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

PubMed Central

Peixoto, Adriano Porto; Pinto, Ary dos Santos; Garib, Daniela Gamba; Gonçalves, João Roberto

2014-01-01

Introduction This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. Methods Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. Results During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between centroid and gingival changes suggested that upper and lower arch premolars buccaly proclined during the pre-surgical period. Conclusions Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods. PMID:25279524

Achilles tendon injury risk factors associated with running.

PubMed

Lorimer, Anna V; Hume, Patria A

2014-10-01

Research into the nature of overuse Achilles tendon injuries is extensive, yet uncertainty remains around how to identify athletes susceptible to Achilles tendon injury. To identify the strength of evidence for biomechanical risk factors associated with Achilles tendon injuries. SPORTDiscus, CINAHL, Web of Science and PubMed were searched for Achilles tendon injury risk factors and biomechanical measures which are altered in runners with Achilles tendon injuries, excluding ruptures. Fifteen articles were included in the analysis. Two variables, high vertical forces and high arch, showed strong evidence for reduced injury risk. High propulsive forces and running on stiffer surfaces may also be protective. Only one biomechanical variable, high braking force, showed clear evidence for increasing Achilles injury risk. Gait retraining to direct the centre of mass further forward to reduce high braking force could be useful in decreasing the risk of Achilles injury. The majority of biomechanical risk factors examined showed unclear results, which is likely due to the multifactorial nature of Achilles overuse injuries. Many risk factors are related to how the athlete's body interacts with the environment during gait, including ground reaction forces, muscle activity both prior to landing and immediately post ground contact, and joint motion throughout stance. Multiple risk factors have been associated with the development of Achilles tendon injuries in running athletes but most effects remain unclear. Advice for athletes recovering from Achilles tendon injuries could include avoiding soft surfaces and reducing the pace of recovery runs. Orthotic intervention could assist athletes with low arches but modification of pronation should be viewed with caution. Strength training and gait retraining could be beneficial for reducing injury risk.

Modified protrusion arch for anterior crossbite correction - a case report.

PubMed

Roy, Abhishek Singha; Singh, Gulshan Kr; Tandon, Pradeep; Chaudhary, Ramsukh

2013-01-01

Borderline and mild skeletal Class III relationships in adult patients are usually treated by orthodontic camouflage. Reasonably rood results have been achieved with nonsurgical teatment of anterior crossbite. Class III malocclusion may be associated with mandibular prognathism, maxillary retrognathism, or both. Class III maxillary retrognathism generally involves anterior crossbite, which must be opened if upper labial brackets are to be bonded. If multiple teeth are in crossbite, after opening the bite usual step is to ligate forward or advancement arch made of 0.018" or 0.020" stainless steel or NiTi wire main arch that must be kept separated 2 mm from the slot ofupper incisor braces. Two stops or omegas are made 1 mm mesial to the tubes of the molar bands that will impede main arch from slipping,and in this manner the arch will push the anterior teeth forward Here we have fabricated a modified multiple loop protrusion arch to correct an anterior crossbite with severe crowding that was not amenable to correct by advancement arches.

Optimization of shallow arches against instability using sensitivity derivatives

NASA Technical Reports Server (NTRS)

Kamat, Manohar P.

1987-01-01

The author discusses the problem of optimization of shallow frame structures which involve a coupling of axial and bending responses. A shallow arch of a given shape and of given weight is optimized such that its limit point load is maximized. The cross-sectional area, A(x) and the moment of inertia, I(x) of the arch obey the relationship I(x) = rho A(x) sup n, n = 1,2,3 and rho is a specified constant. Analysis of the arch for its limit point calculation involves a geometric nonlinear analysis which is performed using a corotational formulation. The optimization is carried out using a second-order projected Lagrangian algorithm and the sensitivity derivatives of the critical load parameter with respect to the areas of the finite elements of the arch are calculated using implicit differentation. Results are presented for an arch of a specified rise to span ratio under two different loadings and the limitations of the approach for the intermediate rise arches are addressed.

Shortened dental arch and cerebral regional blood volume: an experimental pilot study with optical topography.

PubMed

Miyamoto, Ikuya; Yoshida, Kazuya; Bessho, Kazuhisa

2009-04-01

A shortened dental arch without posterior occlusal support has been thought to maintain sufficient oral function. The mechanism of occlusal adaptation with a shortened dental arch is unclear. For a better understanding of the effects of molar teeth on brain function, the authors combined experimentally-shortened dental arches and a neuro-imaging technique. Regional cerebral blood volume was measured using near-infrared optical topography during maximum voluntary clenching tasks from 10 subjects on individually fabricated oral appliances, which can create experimentally complete and shortened dental arches. Results suggested that clenching on the complete dental arch showed a significantly higher brain blood volume than that on the shortened dental arch. Moreover, there were no differences between the two splints in the latency to the maximum oxyhemoglobin concentration. These findings suggest that occlusal status is closely related to brain blood flow and lack of occlusal molar support rapidly reduces cerebral blood volume in the maximum voluntary clenching condition.

Developmental evidence for serial homology of the vertebrate jaw and gill arch skeleton

PubMed Central

Gillis, J. Andrew; Modrell, Melinda S.; Baker, Clare V. H.

2013-01-01

Gegenbaur’s classical hypothesis of jaw-gill arch serial homology is widely cited, but remains unsupported by either paleontological evidence (e.g. a series of fossils reflecting the stepwise transformation of a gill arch into a jaw) or developmental genetic data (e.g. shared molecular mechanisms underlying segment identity in the mandibular, hyoid and gill arch endoskeletons). Here we show that nested expression of Dlx genes – the “Dlx code” that specifies upper and lower jaw identity in mammals and teleosts – is a primitive feature of the mandibular, hyoid and gill arches of jawed vertebrates. Using fate-mapping techniques, we demonstrate that the principal dorsal and ventral endoskeletal segments of the jaw, hyoid and gill arches of the skate Leucoraja erinacea derive from molecularly equivalent mesenchymal domains of combinatorial Dlx gene expression. Our data suggest that vertebrate jaw, hyoid and gill arch cartilages are serially homologous, and were primitively patterned dorsoventrally by a common Dlx blueprint. PMID:23385581

Is there a prospect for hybrid aortic arch surgery?

PubMed

Bashir, Mohamad; Harky, Amer; Bilal, Haris

2018-05-16

The surge of endovascular repair of aortic aneurysm in current modern aortic surgery practice has been the key for surgical management of elective cases of thoracic aortic aneurysms. This has paved way for the combined hybrid approach to be amongst the armamentarium for the management of aortic arch disease. The pivotal understanding of the aortic arch natural history coupled with device technology advancement allowed surgeons insight into delivery of hybrid surgery with acceptable morbidity and mortality results. This review article provides current insights into hybrid technique of aortic arch aneurysm repair and the evidences behind its applicability to arch surgery. It is aimed to highlight the challenges encountered for this innovative approach and correlate its challenges to those that are met by the conventional open aortic arch repair.

Tracheal Compression Caused by a Mediastinal Hematoma After Interrupted Aortic Arch Surgery.

PubMed

Hua, Qingwang; Lin, Zhiyong; Hu, Xingti; Zhao, Qifeng

2017-08-03

Congenital abnormalities of the aortic arch include interrupted aortic arch (IAA), coarctation of the aorta (CoA), and double aortic arch (DAA). Aortic arch repair is difficult and postoperative complications are common. However, postoperative tracheobronchial stenosis with respiratory insufficiency is an uncommon complication and is usually caused by increased aortic anastomotic tension. We report here a case of tracheal compression by a mediastinal hematoma following IAA surgery. The patient underwent a repeat operation to remove the hematoma and was successfully weaned off the ventilator.In cases of tracheobronchial stenosis after aortic arch surgery, airway compression by increased aortic anastomotic tension is usually the first diagnosis considered by clinicians. Other causes, such as mediastinal hematomas, are often ignored. However, the severity of symptoms with mediastinal hematomas makes this an important entity.

Absent right common carotid artery associated with aberrant right subclavian artery.

PubMed

Uchino, Akira; Uwabe, Kazuhiko; Osawa, Iichiro

2018-06-01

Rarely, the external and internal carotid arteries arise separately from the brachiocephalic trunk and right subclavian artery (SA) or the aortic arch and reflect the absence of a common carotid artery (CCA). We report a 45-year-old man with absent right CCA associated with aberrant right SA, an extremely rare combination, diagnosed by computed tomography (CT) angiography during follow-up for postoperative aortic dissection. Retrospective careful observation of preoperative postcontrast CT revealed the absent right CCA. Previously reported arch variations associated with absent CCA include cervical aortic arch, double aortic arch, and right aortic arch.

Ball motion and sliding friction in an arched outer race ball bearing

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1973-01-01

The motion of the ball and sliding friction in an arched outer race ball bearing under thrust loads is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.

Ball motion and sliding friction in an arched outer race ball bearing

NASA Technical Reports Server (NTRS)

Hamrock, B. J.

1974-01-01

The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.

Reassessing the Dlx code: the genetic regulation of branchial arch skeletal pattern and development

PubMed Central

Depew, Michael J; Simpson, Carol A; Morasso, Maria; Rubenstein, John LR

2005-01-01

The branchial arches are meristic vertebrate structures, being metameric both between each other within the rostrocaudal series along the ventrocephalic surface of the embryonic head and within each individual arch: thus, just as each branchial arch must acquire a unique identity along the rostrocaudal axis, each structure within the proximodistal axis of an arch must also acquire a unique identity. It is believed that regional specification of metameric structures is controlled by the nested expression of related genes resulting in a regional code, a principal that is though to be demonstrated by the regulation of rostrocaudal axis development in animals exerted by the nested HOM-C/Hox homeobox genes. The nested expression pattern of the Dlx genes within the murine branchial arch ectomesenchyme has more recently led to the proposal of a Dlx code for the regional specification along the proximodistal axis of the branchial arches (i.e. it establishes intra-arch identity). This review re-examines this hypothesis, and presents new work on an allelic series of Dlx loss-of-function mouse mutants that includes various combinations of Dlx1, Dlx2, Dlx3, Dlx5 and Dlx6. Although we confirm fundamental aspects of the hypothesis, we further report a number of novel findings. First, contrary to initial reports, Dlx1, Dlx2 and Dlx1/2 heterozygotes exhibit alterations of branchial arch structures and Dlx2−/− and Dlx1/2−/− mutants have slight alterations of structures derived from the distal portions of their branchial arches. Second, we present evidence for a role for murine Dlx3 in the development of the branchial arches. Third, analysis of compound Dlx mutants reveals four grades of mandibular arch transformations and that the genetic interactions of cis first-order (e.g. Dlx5 and Dlx6), trans second-order (e.g. Dlx5 and Dlx2) and trans third-order paralogues (e.g. Dlx5 and Dlx1) result in significant and distinct morphological differences in mandibular arch development. We conclude by integrating functions of the Dlx genes within the context of a hypothesized general mechanism for the establishment of pattern and polarity in the first branchial arch of gnathostomes that includes regionally secreted growth factors such as Fgf8 and Bmp and other transcription factors such as Msx1, and is consistent both with the structure of the conserved gnathostome jaw bauplan and the elaboration of this bauplan to meet organismal end-point designs. PMID:16313391

Mathematical beta function formulation for maxillary arch form prediction in normal occlusion population.

PubMed

Mina, Morteza; Borzabadi-Farahani, Ali; Tehranchi, Azita; Nouri, Mahtab; Younessian, Farnaz

2017-04-01

The aim of this study was to assess the dental arch curvature in subjects with normal occlusion in an Iranian population and propose a beta function formula to predict maxillary arch form using the mandibular intermolar widths (IMW) and intermolar depths (IMD). The materials used were study casts of 54 adolescents with normal occlusion and mean age of 14.1 years (25 males, 29 females, age range 12-16 years). Curve-fitting analyses were carried out and the curves passing through the facial-axis point of the canines, premolars, first molars, and the incisal edges of the anterior teeth were studied using a 3D laser scanner. Using the measured IMW and IMD of the dental arches at the maxillary and mandibular first molar region, a beta function formula proposed for predicting maxillary arch form. The accuracy of the proposed formula was assessed on 10 randomly selected dental casts. The mean (SD) of the maxillary and mandibular IMW and IMD were 57.92 (4.75), 54.19 (5.31), and 31.59 (2.90) and 28.10 (2.59) mm, respectively. There was no gender dimorphism (P > 0.05) for both variables (IMW, IMD). There was a strong positive association (n = 10, Pearson r = 0.98, P < 0.05) between the measured (actual) maxillary arch length and proposed arch length derived from generated formula. The goodness of fit (whole arch) for the proposed beta function formula, using adjusted r square measure and root mean square in 10 patients averaged 0.97 and 1.49 mm, respectively. The corresponding figures for the maxillary anterior arch (canine to canine) were 0.90 and 0.92 mm, respectively. The proposed beta function formula used for predicting maxillary arch form based on two mandibular measures (IMW, IMD) was found to have a high accuracy for maxillary arch prediction in the Iranian population and may be used as a guide to fabricate customized arch wires or as an aid in maxillary reconstructive surgery.

10. Typical Masonry Longitudinal Section Arch Seven; Typical Masonry ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Typical Masonry Longitudinal Section - Arch Seven; Typical Masonry Longitudinal Section - Arch Eight - Arlington Memorial Bridge, Spanning Potomac River between Lincoln Memorial & Arlington National Cemetery, Washington, District of Columbia, DC

Assessment of the influence of jogging on the shape of female foot arches.

PubMed

Maslon, Agata; Golec, Joanna; Szczygiel, Elzbieta; Czechowska, Dorota; Golec, Boguslaw

2017-12-23

Both walking and its faster, running, consist of cyclical subsequent phases of swing and support; however, they differ in their time proportions as well as magnitude of acting forces. There is a lack of studies concerning the long-term consequences of repeated jogging cycles on the function of feet and, above all, on their permanent impact on the shape of foot arches. The objective of this study was to answer the question whether regular jogging changes the shape of the transverse and medial longitudinal arches of the feet. The research material consisted of 96 women with an average age of 26.57, and included 50 actively jogging women, and 46 of non-joggers. The study was performed with the use of EMED-SF force platform. The plantar surface of the foot was divided into 10 regions according to Cavanagh, for which peak pressure and contact time were established. Two indicators were defined: metatarsal bone pressure distribution pattern acc. to Kantali, and longitudinal arch index acc. to Cavanagh. The data obtained revealed more frequent occurrence of the greatest pressure under the centrally located metatarsal heads (lack of functional foot transverse arch) among the female joggers, compared with the non-joggers. Moreover, the findings indicate the higher frequency of medial longitudinal foot arch flattening among female runners, with a great deal of consistency between both feet, whereas results for the control group show asymmetrical medial arch shapes with right foot propensity to normal arch shape and left foot tendency for excessive arch. The observed differences in feet arch shapes between female joggers and non-joggers indicate the influence of jogging on feet functional adaptations.

Interaction of arch type and footwear on running mechanics.

PubMed

Butler, Robert J; Davis, Irene S; Hamill, Joseph

2006-12-01

Running shoes are designed to accommodate various arch types to reduce the risk of lower extremity injuries sustained during running. Yet little is known about the biomechanical changes of running in the recommended footwear that may allow for a reduction in injuries. To evaluate the effects of motion control and cushion trainer shoes on running mechanics in low- and high-arched runners. Controlled laboratory study. Twenty high-arched and 20 low-arched recreational runners (>10 miles per week) were recruited for the study. Three-dimensional kinematic and kinetics were collected as subjects ran at 3.5 ms(-1) +/- 5% along a 25-m runway. The motion control shoe evaluated was the New Balance 1122, and the cushioning shoe evaluated was the New Balance 1022. Repeated-measures analyses of variance were used to determine if low- and high-arched runners responded differently to motion control and cushion trainer shoes. A significant interaction was observed in the instantaneous loading rate such that the low-arched runners had a lower instantaneous loading rate in the motion control condition, and the high-arched runners had a lower instantaneous loading rate in the cushion trainer condition. Significant main effects for shoe were observed for peak positive tibial acceleration, peak-to-peak tibial acceleration, mean loading rate, peak eversion, and eversion excursion. These results suggest that motion control shoes control rearfoot motion better than do cushion trainer shoes. In addition, cushion trainer shoes attenuate shock better than motion control shoes do. However, with the exception of instantaneous loading rate, these benefits do not differ between arch type. Running footwear recommendations should be based on an individual's running mechanics. If a mechanical analysis is not available, footwear recommendations can be based empirically on the individual's arch type.

Aortic Arch Pulse Wave Velocity Assessed by Magnetic Resonance Imaging as a Predictor of Incident Cardiovascular Events: The MESA (Multi-Ethnic Study of Atherosclerosis).

PubMed

Ohyama, Yoshiaki; Ambale-Venkatesh, Bharath; Noda, Chikara; Kim, Jang-Young; Tanami, Yutaka; Teixido-Tura, Gisela; Chugh, Atul R; Redheuil, Alban; Liu, Chia-Ying; Wu, Colin O; Hundley, W Gregory; Bluemke, David A; Guallar, Eliseo; Lima, Joao A C

2017-09-01

The predictive value of aortic arch pulse wave velocity (PWV) assessed by magnetic resonance imaging for cardiovascular disease (CVD) events has not been fully established. The aim of the present study was to evaluate the association of arch PWV with incident CVD events in MESA (Multi-Ethnic Study of Atherosclerosis). Aortic arch PWV was measured using magnetic resonance imaging at baseline in 3527 MESA participants (mean age, 62±10 years at baseline; 47% men) free of overt CVD. Cox regression was used to evaluate the risk of incident CVD (coronary heart disease, stroke, transient ischemic attack, or heart failure) in relation to arch PWV adjusted for age, sex, race, and CVD risk factors. The median value of arch PWV was 7.4 m/s (interquartile range, 5.6-10.2). There was significant interaction between arch PWV and age for outcomes, so analysis was stratified by age categories (45-54 and >54 years). There were 456 CVD events during the 10-year follow-up. Forty-five to 54-year-old participants had significant association of arch PWV with incident CVD independent of CVD risk factors (hazard ratio, 1.44; 95% confidence interval, 1.07-1.95; P =0.018; per 1-SD increase for logarithmically transformed PWV), whereas >54-year group did not ( P =0.93). Aortic arch PWV assessed by magnetic resonance imaging is a significant predictor of CVD events among middle-aged (45-54 years old) individuals, whereas arch PWV is not associated with CVD among an elderly in a large multiethnic population. © 2017 American Heart Association, Inc.

Fenestrated endovascular repair of aortic arch aneurysm in patients with bovine arch using the Najuta stent graft.

PubMed

Toya, Naoki; Ohki, Takao; Fukushima, Soichiro; Shukuzawa, Kota; Ito, Eisaku; Akiba, Tadashi

2018-06-01

We describe the case of a 74-year-old man with a thoracic aortic aneurysm with a bovine arch who underwent fenestrated endovascular repair of aortic arch aneurysm using the Najuta stent graft (Kawasumi Laboratories, Inc, Tokyo, Japan). He has had a previous endovascular aneurysm repair and femoropopliteal bypass for abdominal aortic aneurysm combined with peripheral arterial disease. The Najuta stent graft was inserted and deployed at zone 0 with delicate positional adjustment of the fenestration of the stent graft to the brachiocephalic trunk. There was no endoleak or complication. His postoperative course was uneventful. At 7-month follow-up, complete exclusion of the aneurysm was noted. The Najuta stent graft repair of aortic arch aneurysms is a safe and effective treatment option for patients with a bovine arch.

Total Arch versus Hemiarch Replacement for Type A Acute Aortic Dissection: A Single-Center Experience.

PubMed

Lio, Antonio; Nicolò, Francesca; Bovio, Emanuele; Serrao, Andrea; Zeitani, Jacob; Scafuri, Antonio; Chiariello, Luigi; Ruvolo, Giovanni

2016-12-01

We retrospectively evaluated early and intermediate outcomes of aortic arch surgery in patients with type A acute aortic dissection (AAD), investigating the effect of arch surgery extension on postoperative results. From January 2006 through July 2013, 201 patients with type A AAD underwent urgent corrective surgery at our institution. Of the 92 patients chosen for this study, 59 underwent hemiarch replacement (hemiarch group), and 33 underwent total arch replacement (total arch group) in conjunction with ascending aorta replacement. The operative mortality rate was 22%. Total arch replacement was associated with a 33% risk of operative death, versus 15% for hemiarch ( P =0.044). Multivariable analysis found these independent predictors of operative death: age (odds ratio [OR]=1.13/yr; 95% confidence interval [CI], 1.04-1.23; P =0.002), body mass index >30 kg/m 2 (OR=9.9; 95% CI, 1.28-19; P =0.028), postoperative low cardiac output (OR=10.6; 95% CI, 1.18-25; P =0.035), and total arch replacement (OR=8.8; 95% CI, 1.39-15; P =0.021) The mean overall 5-year survival rate was 59.3% ± 5.5%, and mean 5-year freedom from distal reintervention was 95.4% ± 3.2% ( P =NS). In type A AAD, aortic arch surgery is still associated with high operative mortality rates; hemiarch replacement can be performed more safely than total arch replacement. Rates of distal aortic reoperation were not different between the 2 surgical strategies.

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

DTIC Science & Technology

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

Force delivery of NiTi orthodontic arch wire at different magnitude of deflections and temperatures: A finite element study.

PubMed

Razali, M F; Mahmud, A S; Mokhtar, N

2018-01-01

NiTi arch wires are used widely in orthodontic treatment due to its superelastic and biocompatibility properties. In brackets configuration, the force released from the arch wire is influenced by the sliding resistances developed on the arch wire-bracket contact. This study investigated the evolution of the forces released by a rectangular NiTi arch wire towards possible intraoral temperature and deflection changes. A three dimensional finite element model was developed to measure the force-deflection behavior of superelastic arch wire. Finite element analysis was used to distinguish the martensite fraction and phase state of arch wire microstructure in relation to the magnitude of wire deflection. The predicted tensile and bending results from the numerical model showed a good agreement with the experimental results. As contact developed between the wire and bracket, binding influenced the force-deflection curve by changing the martensitic transformation plateau into a slope. The arch wire recovered from greater magnitude of deflection released lower force than one recovered from smaller deflection. In contrast, it was observed that the plateau slope increased from 0.66N/mm to 1.1N/mm when the temperature was increased from 26°C to 46°C. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of cone-beam computed tomography image artifacts on the determination of dental arch measurements.

PubMed

Gamba, Thiago O; Oliveira, Matheus L; Flores, Isadora L; Cruz, Adriana D; Almeida, Solange M; Haiter-Neto, Francisco; Lopes, Sérgio L P C

2014-03-01

To compare dental plaster model (DPM) and cone-beam computed tomography (CBCT) in the measurement of the dental arches, and investigate whether CBCT image artifacts compromise the reliability of such measurements. Twenty patients were divided into two groups based on the presence or absence of metallic restorations in the posterior teeth. Both dental arches of the patients were scanned with the CBCT unit i-CAT, and DPMs were obtained. Two examiners obtained eight arch measurements on the CBCT images and DPMs and repeated this procedure 15 days later. The arch measurements of each patient group were compared separately by the Wilcoxon rank sum (Mann-Whitney U) test, with a significance level of 5% (α  =  .05). Intraclass correlation measured the level of intraobserver agreement. Patients with healthy teeth showed no significant difference between all DPM and CBCT arch measurements (P > .05). Patients with metallic restoration showed significant difference between DPM and CBCT for the majority of the arch measurements (P > .05). The two examiners showed excellent intraobserver agreement for both measuring methods with intraclass correlation coefficient higher than 0.95. CBCT provided the same accuracy as DPM in the measurement of the dental arches, and was negatively influenced by the presence of image artifacts.

Effect of antipronation foot orthosis geometry on compression of heel and arch soft tissues.

PubMed

Sweeney, Declan; Nester, Christopher; Preece, Stephen; Mickle, Karen

2015-01-01

This study aimed to understand how systematic changes in arch height and two designs of heel wedging affect soft tissues under the foot. Soft tissue thickness under the heel and navicular was measured using ultrasound. Heel pad thickness was measured when subjects were standing on a flat surface and standing on an orthosis with 4 and 8 degree extrinsic wedges and 4 mm and 8 mm intrinsic wedges (n = 27). Arch soft tissue thickness was measured when subjects were standing and when standing on an orthosis with -6 mm, standard, and +6 mm increments in arch height (n = 25). Extrinsic and intrinsic heel wedges significantly increased soft tissue thickness under the heel compared with no orthosis. The 4 and 8 degree extrinsic wedges increased tissue thickness by 28% and 27.6%, respectively, while the 4 mm and 8 mm intrinsic wedges increased thickness by 23% and 14.6%, respectively. Orthotic arch height significantly affected arch soft tissue thickness. Compared with the no orthosis condition, the -6 mm, standard, and +6 mm arch heights decreased arch tissue thickness by 9%, 10%, and 11.8%, respectively. This study demonstrates that change in orthotic geometry creates different plantar soft tissue responses that we expect to affect transmission of force to underlying foot bones.

Increased plantar force and impulse in American football players with high arch compared to normal arch

PubMed Central

Carson, Daniel W.; Myer, Gregory D.; Hewett, Timothy E.; Heidt, Robert S.; Ford, Kevin R.

2014-01-01

Background Risk of overuse injury among athletes is high due in part to repeated loading of the lower extremities. Compared to individuals with normal arch (NA) structure, those with high (HA) or low arch (LA) may be at increased risk of specific overuse injuries, including stress fractures. A high medial longitudinal arch may result in decreased shock absorbing properties due to increased rigidity in foot mechanics. While the effect of arch structure on dynamic function has been examined in straight line walking and running, the relationship between the two during multi-directional movements remains unstudied. Objective The purpose of this study was to determine if differences in plantar loading in football players occur during both walking and pivoting movements. Method Plantar loading was examined in 9 regions of the foot for 26 participants (16 NA, 10 HA). Results High arch athletes demonstrated increased maximum force in the lateral rear foot and medial forefoot, and force time integral in the medial forefoot while walking. HA athletes also demonstrated increased maximum force in the medial rear foot and medial and central forefoot during rapid pivoting. Conclusions The current findings demonstrate that loading patterns differ between football players with high and normal arch structure, which could possibly influence injury risk in this population. PMID:23141809

Mandibular arch form: the relationship between dental and basal anatomy.

PubMed

Ronay, Valerie; Miner, R Matthew; Will, Leslie A; Arai, Kazuhito

2008-09-01

We investigated mandibular dental arch form at the levels of both the clinically relevant application points of the orthodontic bracket and the underlying anatomic structure of the apical base. The correlation of both forms was evaluated and examined to determine whether the basal arch could be used to derive a standardized clinical arch form. Thirty-five mandibular dental casts (skeletal and dental Class I) were laser scanned, and a 3-dimensional virtual model was created. Two reference points (FA, the most prominent part of the central lobe on each crown's facial surface, and WALA, a point at the height of the mucogingival junction) were selected for each tooth from the right to the left first molars. The FA and WALA arch forms were compared, and the distances between corresponding points and intercanine and intermolar widths were analyzed. Both arch forms were highly individual and the tooth values scattered. Nevertheless, a highly significant relationship between the FA and WALA curves was found, especially in the canine (0.75) and molar (0.87) areas. Both FA and WALA point-derived arch forms were individual and therefore could not be defined by a generalized shape. WALA points proved to be a useful representation of the apical base and helpful in the predetermination of an individualized dental arch form.

Multiflex versus superelastic: a randomized clinical trial of the tooth alignment ability of initial arch wires.

PubMed

West, A E; Jones, M L; Newcombe, R G

1995-11-01

Two arch wires commonly used for initial tooth alignment were compared with regard to their clinical effectiveness. The two arch wires tested were 0.0155-inch diameter multiple-stranded stainless steel wire (Dentaflex, Dentaurium, Optident, Yorkshire, England) and 0.014-inch diameter nickel-titanium alloy wire (NiTi, ORMCO Co., Monrovia, Calif.). Consecutive patients attending an orthodontic clinic for routine placement of a fixed appliance were randomly assigned one of these two initial arch wires. Good quality alginate impressions of the appropriate dental arch were taken before arch wire placement and also at the subsequent appointment, which was, on average, 6 weeks later. Seventy-four arches were used in this study. The degree of tooth alignment achieved for each wire type was compared with a Reflex Microscope (Reflex Measurement Ltd., Butleigh, England) to make detailed measurements on the resultant casts. The degree of initial alignment achieved with the two wires was similar over this 6-week period. However, some differences were found for the lower labial segment where the interbracket span is usually reduced and where the superelastic nickel-titanium wire was found to give improved alignment. No threshold of crowding was found where one arch wire performed better than the other.

A harmonic adiabatic approximation to calculate highly excited vibrational levels of ``floppy molecules''

NASA Astrophysics Data System (ADS)

Lauvergnat, David; Nauts, André; Justum, Yves; Chapuisat, Xavier

2001-04-01

The harmonic adiabatic approximation (HADA), an efficient and accurate quantum method to calculate highly excited vibrational levels of molecular systems, is presented. It is well-suited to applications to "floppy molecules" with a rather large number of atoms (N>3). A clever choice of internal coordinates naturally suggests their separation into active, slow, or large amplitude coordinates q', and inactive, fast, or small amplitude coordinates q″, which leads to an adiabatic (or Born-Oppenheimer-type) approximation (ADA), i.e., the total wave function is expressed as a product of active and inactive total wave functions. However, within the framework of the ADA, potential energy data concerning the inactive coordinates q″ are required. To reduce this need, a minimum energy domain (MED) is defined by minimizing the potential energy surface (PES) for each value of the active variables q', and a quadratic or harmonic expansion of the PES, based on the MED, is used (MED harmonic potential). In other words, the overall picture is that of a harmonic valley about the MED. In the case of only one active variable, we have a minimum energy path (MEP) and a MEP harmonic potential. The combination of the MED harmonic potential and the adiabatic approximation (harmonic adiabatic approximation: HADA) greatly reduces the size of the numerical computations, so that rather large molecules can be studied. In the present article however, the HADA is applied to our benchmark molecule HCN/CNH, to test the validity of the method. Thus, the HADA vibrational energy levels are compared and are in excellent agreement with the ADA calculations (adiabatic approximation with the full PES) of Light and Bačić [J. Chem. Phys. 87, 4008 (1987)]. Furthermore, the exact harmonic results (exact calculations without the adiabatic approximation but with the MEP harmonic potential) are compared to the exact calculations (without any sort of approximation). In addition, we compare the densities of the bending motion during the HCN/CNH isomerization, computed with the HADA and the exact wave function.

SOFIA/FORCAST Observations of the Arched Filamentary Region in the Galactic Center

NASA Astrophysics Data System (ADS)

Hankins, Matthew; Lau, Ryan M.; Morris, Mark; Herter, Terry L.

2016-06-01

Abstract: We present 19.7, 25.2, 31.5, and 37.1 μm maps of the Thermal Arched Filament region in the Galactic Center taken with the Faint Object Infrared Camera for the SOFIA Telescope (FORCAST) with an angular resolution of 3.2-3.8". We calculate the integrated infrared luminosity of the Arched Filaments and show that they are consistent with being heated by the nearby Arches cluster. Additionally, using our observations, we infer dust temperatures (75 - 90 K) across the Arched Filaments which are remarkably consistent over large spatial scales (˜ 25 pc). We discuss the possible geometric effects needed to recreate this temperature structure. Additionally, we compare the observed morphology of the Arches in the FORCAST maps with the Paschen-α emission in the region to study what fraction of the infrared emission may be coming from dust in the HII region versus the PDR beneath it. Finally, we use Spitzer/IRAC 8 μm data to look for spatial variations in PAH abundance in the rich UV environment of the young (~2-4 Myr) and massive Arches cluster.

Double aortic arch presenting with a foreign object in the oesophagus: a case report and imaging diagnosis.

PubMed

Yang, Xiuzhen; Ye, Jingjing; Gao, Zhan

2017-10-01

In this article, we report a rare case of double aortic arch. The case presented initially with a foreign object in the oesophagus. The patient was a 2-year-old boy, who was referred with primary symptoms of tussis (15 days) and emesis (2 days). He had a history of ingesting a coin. Routine chest X-ray indicated a rounded, metal foreign object in the upper oesophagus. A half-Yuan coin was removed by gastroduodenoscopy. Echocardiographic imaging suggested that the patient had double aortic arch, which was subsequently diagnosed by CT angiography with three-dimensional reconstruction. The right subclavian artery arose from the right loop of the double aortic arch. The left subclavian artery as well as left and right common carotid arteries had distinct origins from the left aortic arch. Imaging also indicated atresia of the distal left arch. The patient underwent corrective surgery and made a full recovery. Despite the rarity, double aortic arch should be considered when patients present with a foreign object in the oesophagus. Echocardiography and CT angiography can inform the diagnosis.

Childhood constipation is not associated with characteristic fingerprint patterns

PubMed Central

Jackson, C; Anderson, B; Jaffray, B

2003-01-01

Background: It has been suggested that there is an association between simple arch fingerprint patterns and severe childhood constipation. If real, this association might be useful to predict which children have a poor prognosis. Aim: To see how many severely constipated children have simple arches, compared to non-constipated controls and their first degree relatives. Methods: Fingerprints were classified by two blinded assessors in 30 children requiring surgery for refractory constipation, and 30 children with appendicitis, and the first degree relatives of both groups. Colonic transit times and clinical outcomes were also evaluated among constipated children. Results: At least one simple arch was found in similar numbers of constipated children (13%) and their families (16%), and control children (7%) and their families (13%). Arch positivity was commoner among relatives of arch positive (6/6) than arch negative children (14/54), regardless of bowel history. Arch positivity did not identify children with prolonged transit times, nor those who required colectomy. Conclusions: Fingerprint patterns are not associated with severe childhood constipation, do not aid their management, and do not support a genetic aetiology for this problem. PMID:14670772

Slow relaxation dynamics of clogs in a vibrated granular silo.

PubMed

Guerrero, B V; Pugnaloni, L A; Lozano, C; Zuriguel, I; Garcimartín, A

2018-04-01

We experimentally explore the vibration-induced unclogging of arches halting the flow in a two-dimensional silo. The endurance of arches is determined by carrying out a survival analysis of their breaking times. By analyzing the dynamics of two morphological variables, we demonstrate that arches evolve toward less regular structures and it seems that there may exist a certain degree of irregularity that the arch reaches before collapsing. Moreover, we put forward that σ (the standard deviation of all angles between consecutive beads) describes faithfully the morphological evolution of the arch. Focusing on long-lasting arches, we study σ calculating its two-time autocorrelation function and its mean-squared displacement. In particular, the apparent logarithmic increase of the correlation and the decrease of the mean-squared displacement of σ when the waiting time is increased reveal a slowing down of the dynamics. This behavior is a clear hallmark of aging phenomena and confirms the lack of ergodicity in the unclogging dynamics. Our findings provide new insights on how an arch tends to destabilize and how the probability that it breaks with a long sustained vibration decreases with time.

Slow relaxation dynamics of clogs in a vibrated granular silo

NASA Astrophysics Data System (ADS)

Guerrero, B. V.; Pugnaloni, L. A.; Lozano, C.; Zuriguel, I.; Garcimartín, A.

2018-04-01

We experimentally explore the vibration-induced unclogging of arches halting the flow in a two-dimensional silo. The endurance of arches is determined by carrying out a survival analysis of their breaking times. By analyzing the dynamics of two morphological variables, we demonstrate that arches evolve toward less regular structures and it seems that there may exist a certain degree of irregularity that the arch reaches before collapsing. Moreover, we put forward that σ (the standard deviation of all angles between consecutive beads) describes faithfully the morphological evolution of the arch. Focusing on long-lasting arches, we study σ calculating its two-time autocorrelation function and its mean-squared displacement. In particular, the apparent logarithmic increase of the correlation and the decrease of the mean-squared displacement of σ when the waiting time is increased reveal a slowing down of the dynamics. This behavior is a clear hallmark of aging phenomena and confirms the lack of ergodicity in the unclogging dynamics. Our findings provide new insights on how an arch tends to destabilize and how the probability that it breaks with a long sustained vibration decreases with time.

Load rating of Bibb Graves Concrete Arch Bridge.

DOT National Transportation Integrated Search

2014-07-01

To assess the strength of the Bibb Graves Concrete Arch Bridge, the Alabama Department of Transportation sponsored an : investigation by Auburn University. In one of the spans, the arches are experiencing severe longitudinal cracking from Alkali-Sili...

Comparative Numerical Analysis of Different Strengthening Systems of Historical Brick Arches

NASA Astrophysics Data System (ADS)

Zielińska, M.

2017-05-01

The article presents a comparative numerical analysis of various ways to strengthen historical brick arches. Five ways of strengthening brick arches with steel tie-rods have been proposed. Two of these involve the use of braces wrapped around pillars supporting the arch connected with a tie-rod; the other two ways involve the use of the tie-rods with welded metal sheets of different sizes; the latter involves the use of a tie-rod glued with the use of an epoxy adhesive. The collected data were compared with the reference model of the arch left without any interference. The results make it possible to evaluate the effectiveness of the methods by comparing displacements in the vertical and horizontal direction and stresses. The article indicates the direction of proper planning and design of the arch strengthening in brick structures in historical buildings.

Coexistence of bilateral first and second branchial arch anomalies

PubMed Central

Thakur, J S; Shekar, Vidya; Saluja, Manika; Mohindroo, N K

2013-01-01

Branchial arch anomalies are one of the most common congenital anomalies that are usually unilateral and bilateral presentation is rare. The simultaneous presence of bilateral second branchial arch anomalies along with bilateral first arch anomalies is extremely rare, with only three such cases reported in the literature. We present two non-syndromic cases of coexisting bilateral first and second arch anomalies. Developmental anomalies of the branchial apparatus account for 17% of all paediatric cervical masses and are the most common type of congenital cervical mass. They usually present in the paediatric age group. About 96–97% of these anomalies are unilateral. Bilateral presentation is seen in 2–3% having a strong familial association. Congenital syndromes also have been associated with first and second branchial arch anomalies. Thorough clinical examination and investigations should be done to rule out these syndromes. PMID:23580675

A Rare Finding of the Superficial Palmar Arch-Developmental and Clinical Significance

PubMed Central

Saxena, Alok; Agarwal, Kishore Kumar; Ray, Biswabina; Pyrtuh, Samuel

2013-01-01

The ulnar artery provides a major blood supply to the hand in the form of the superficial palmar arch, with the assistance of the radial artery. A rare pattern of the superficial palmar arch was observed in a formalin fixed, male cadaveric left hand. The ulnar artery was only involved in the formation of this arch, which provided three common palmar digital arteries which ran into the second, third and the fourth spaces between the corresponding digits and one proper palmar digital artery which ran along the ulnar side of the little finger. The main trunk of the ulnar artery bifurcated to supply the thumb and the index finger. The superficial branch of the radial artery did not participate in the arch formation. The arch was completed by the radial artery proper on the dorsolateral surface of the hand, after joining the point of bifuracation of the ulnar artery. PMID:23730652

Association of X-ray arches with chromospheric neutral lines

NASA Technical Reports Server (NTRS)

Mcintosh, P. S.; Krieger, A. S.; Nolte, J. T.; Vaiana, G.

1976-01-01

Daily maps of magnetic neutral lines derived from H-alpha observations have been superimposed on solar X-ray images for the period from June 15 to 30, 1973. Nearly all X-ray-emitting structures consist of systems of arches covering chromospheric neutral lines. Areas of low emissivity, coronal holes, appear as the areas between arcades of arches. The presence of a coronal hole, therefore, is determined by the spacing between neutral lines and the scale of the arches over those neutral lines. X-ray emissivity on the solar disk extends from neutral lines in proportion to the vertical and horizontal scale of the arches over those neutral lines. Increasing scale of arches corresponds with increasing age of magnetic fields associated with the neutral line. All X-ray filament cavities coincided with neutral lines, but filaments appeared under cavities for only part of their length and for only a fraction of the disk passage.

Arch bar stabilization of endotracheal tubes in children with facial burns.

PubMed

Perrotta, V J; Stern, J D; Lo, A K; Mitra, A

1995-01-01

Endotracheal tube stabilization in children with facial burns can be difficult. Several methods rely on straps or complex devices that apply undesirable pressure to the face, potentially destroying skin grafts and making wound care difficult. Techniques that rely on a single wire or suture can be unreliable. Presented here is the arch bar method of endotracheal tube stabilization, which appears to be free of these problems. This method employs a standard dental arch bar secured to four maxillary teeth with 24-gauge stainless steel wire. The endotracheal tube is anchored to the arch bar with two pieces of wire or suture material. The arch bar method of endotracheal tube stabilization was used on three patients in the burn center at St. Christopher's Hospital for Children. Wound care and successful skin grafting were performed without difficulty. No complications related to the arch bars occurred.

Comment on ‘egs_brachy: a versatile and fast Monte Carlo code for brachytherapy’

NASA Astrophysics Data System (ADS)

Yegin, Gultekin

2018-02-01

In a recent paper (Chamberland et al 2016 Phys. Med. Biol. 61 8214) develop a new Monte Carlo code called egs_brachy for brachytherapy treatments. It is based on EGSnrc, and written in the C++ programming language. In order to benchmark the egs_brachy code, the authors use it in various test case scenarios in which complex geometry conditions exist. Another EGSnrc based brachytherapy dose calculation engine, BrachyDose, is used for dose comparisons. The authors fail to prove that egs_brachy can produce reasonable dose values for brachytherapy sources in a given medium. The dose comparisons in the paper are erroneous and misleading. egs_brachy should not be used in any further research studies unless and until all the potential bugs are fixed in the code.

Comment on ‘Monte Carlo calculated microdosimetric spread for cell nucleus-sized targets exposed to brachytherapy 125I and 192Ir sources and 60Co cell irradiation’

NASA Astrophysics Data System (ADS)

Lindborg, Lennart; Lillhök, Jan; Grindborg, Jan-Erik

2015-11-01

The relative standard deviation, σr,D, of calculated multi-event distributions of specific energy for 60Co ϒ rays was reported by the authors F Villegas, N Tilly and A Ahnesjö (Phys. Med. Biol. 58 6149-62). The calculations were made with an upgraded version of the Monte Carlo code PENELOPE. When the results were compared to results derived from experiments with the variance method and simulated tissue equivalent volumes in the micrometre range a difference of about 50% was found. Villegas et al suggest wall-effects as the likely explanation for the difference. In this comment we review some publications on wall-effects and conclude that wall-effects are not a likely explanation.

Comment on 'Monte Carlo calculated microdosimetric spread for cell nucleus-sized targets exposed to brachytherapy (125)I and (192)Ir sources and (60)Co cell irradiation'.

PubMed

Lindborg, Lennart; Lillhök, Jan; Grindborg, Jan-Erik

2015-11-07

The relative standard deviation, σr,D, of calculated multi-event distributions of specific energy for (60)Co ϒ rays was reported by the authors F Villegas, N Tilly and A Ahnesjö (Phys. Med. Biol. 58 6149-62). The calculations were made with an upgraded version of the Monte Carlo code PENELOPE. When the results were compared to results derived from experiments with the variance method and simulated tissue equivalent volumes in the micrometre range a difference of about 50% was found. Villegas et al suggest wall-effects as the likely explanation for the difference. In this comment we review some publications on wall-effects and conclude that wall-effects are not a likely explanation.

Maintenance of longitudinal foot arch after different mid/hind-foot arthrodesis procedures in a cadaveric model.

PubMed

Chen, Yanxi; Zhang, Kun; Qiang, Minfei; Hao, Yini

2014-02-01

Currently, the optimal treatment of flatfoot remains inconclusive. Our objectives were to understand the effect of different arthrodeses on maintenance of foot arch and provide experimental basis for rational selection in treatment of flatfoot. Sixteen fresh-frozen cadaver feet amputated above the ankle along with a section of leg were studied from ten males and six females. We used standard clinical techniques and hardware for making the arthrodeses. Plantar pressure in the medial and lateral longitudinal arch distribution was measured with a plantar pressure mapping system under different loading conditions. Values of plantar pressure reaction, mean and maximum dynamic peak pressure between all group pairs were statistically significant (P<0.05). The plantar pressure reaction appeared at the load of 960 N in the medial arch of the unoperated foot, compared with 1080 N after subtalar arthrodesis, 1200 N after talonavicular arthrodesis, 1080 N after calcaneocuboid arthrodesis, 1320 N after double arthrodesis, and 1560 N after triple arthrodesis. The plantar pressure reaction appeared at the load of 360 N in the lateral arch of the unoperated foot, compared with 600 N after subtalar arthrodesis, 600 N after talonavicular arthrodesis, 840 N after calcaneocuboid arthrodesis, 960 N after double arthrodesis, and 1440 N after triple arthrodesis. The triple arthrodesis provided the highest support to both arches; the double arthrodesis appeared to be similar to talonavicular arthrodesis in supporting the medial arch and similar to calcaneocuboid arthrodesis in supporting the lateral arch; subtalar arthrodesis was less effective in supporting both arches. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition.

PubMed

Rhee, Ye-Kyu; Huh, Yoon-Hyuk; Cho, Lee-Ra; Park, Chan-Jin

2015-12-01

The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05).

Evaluation of arch width variations among different skeletal patterns in South Indian population.

PubMed

Prasad, Mandava; Kannampallil, Senny Thomas; Talapaneni, Ashok Kumar; George, Suja Ani; Shetty, Sharath Kumar

2013-01-01

Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face. This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population. Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing. The results showed that male arch widths were significantly larger than those of females (P < 0.05) and there was a significant decrease in inter arch width as the MP-SN angle increased in untreated adult South Indian population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race. It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment.

In vivo Study of the Accuracy of Dual-arch Impressions.

PubMed

de Lima, Luciana Martinelli Santayana; Borges, Gilberto Antonio; Junior, Luiz Henrique Burnett; Spohr, Ana Maria

2014-06-01

This study evaluated in vivo the accuracy of metal (Smart®) and plastic (Triple Tray®) dual-arch trays used with vinyl polysiloxane (Flexitime®), in the putty/wash viscosity, as well as polyether (Impregum Soft®) in the regular viscosity. In one patient, an implant-level transfer was screwed on an implant in the mandibular right first molar, serving as a pattern. Ten impressions were made with each tray and impression material. The impressions were poured with Type IV gypsum. The width and height of the pattern and casts were measured in a profile projector (Nikon). The results were submitted to Student's t-test for one sample (α = 0.05). For the width distance, the plastic dual-arch trays with vinyl polysiloxane (4.513 mm) and with polyether (4.531 mm) were statistically wider than the pattern (4.489 mm). The metal dual-arch tray with vinyl polysiloxane (4.504 mm) and with polyether (4.500 mm) did not differ statistically from the pattern. For the height distance, only the metal dual-arch tray with polyether (2.253 mm) differed statistically from the pattern (2.310 mm). The metal dual-arch tray with vinyl polysiloxane, in the putty/wash viscosities, reproduced casts with less distortion in comparison with the same technique with the plastic dual-arch tray. The plastic or metal dual-arch trays with polyether reproduced cast with greater distortion. How to cite the article: Santayana de Lima LM, Borges GA, Burnett LH Jr, Spohr AM. In vivo study of the accuracy of dual-arch impressions. J Int Oral Health 2014;6(3):50-5.

Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition

PubMed Central

Rhee, Ye-Kyu

2015-01-01

PURPOSE The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05). PMID:26816576

4. 3/4 VIEW OF ARCH OVER ROADWAY AT SOUTH END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. 3/4 VIEW OF ARCH OVER ROADWAY AT SOUTH END OF SPAN, LOOKING SW, SHOWING RIBBED ARCH CONSTRUCTION. - Philadelphia & Reading Railroad, Peacock's Lock Viaduct, Spanning Schuykill River at Reading Railroad, Reading, Berks County, PA

5. TOP OF ARCH AND VIADUCT. NOTE THAT STONES OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. TOP OF ARCH AND VIADUCT. NOTE THAT STONES OF ARCH HAVE BEEN DRAFTED FINISH AROUND THE EDGE) AND THE KEYSTONE HAS BEEN ROUGHLY POINTED. - Valley Railroad, Folly Mills Creek Viaduct, Interstate 81, Staunton, Staunton, VA

Recurrent thyroid abscess - Is it a fourth branchial archanomaly?

PubMed

Desai, A A; Pandya, V K; Chougule, Sachin; Nair, Unnikrishnnan

2006-04-01

Branchial fistulae are of congenital origin(6) and consists of skin lined tract opening internally at junction of cartilaginous and bony meatus in case of 1(st) arch anomaly, tonsillar fossa in case of 2(nd) arch, while 3(rd) and 4(th) arch sinuses have internal opening at level of pyriform sinus or below. A complete tract of 3(rd) or 4(th) arch fistulae is yet to be described. Fourth arch fistulae(1) have a distinct clinical pattern of internal opening at pyriform apex, are left sided and associated with suppurative thyroiditis(3), they manifest at a younger age and treatment involves excision of tract with ipsilateral thyroid lobectomy.

Probabilistic and statistical relationships between number of vehicles and number of visitors at a geologic site in a National Park

USGS Publications Warehouse

Crovelli, R.A.

1997-01-01

The National Park Service needs to establish in all of the national parks how large the parking lots should be in order to enjoy and presence our natural resources, for example, in the Delicate Arch in the Arches National Park. Probabilistic and statistical relationships were developed between the number of vehicles (N) at one time in the Wolfe Ranch parking lot and the number of visitors (X) at Delicate Arch 1.5 miles away in the Arches National Park, southeastern Utah. The value of N is determined such that 30 or more visitors are at the arch only 10% of the time.

Aneurysm of an Aberrant Right Subclavian Artery Successfully Excluded by a Thoracic Aortic Stent Graft with Supra-aortic Bypass of Three Arch Vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Munneke, Graham J.; Loosemore, Thomas M.; Belli, Anna-Maria

2005-06-15

An aberrant right subclavian artery (ARSA) arising from a left-sided aortic arch is the fourth most common aortic arch anomaly. Aneurysmal dilatation of the ARSA requires treatment because of the associated risk of rupture. We present a case where supra-aortic bypass of the arch vessels was performed to facilitate exclusion of the aneurysm by a thoracic aortic stent graft.

The deep plantar arch in humans: constitution and topography.

PubMed

Gabrielli, C; Olave, E; Mandiola, E; Rodrigues, C F; Prates, J C

2001-01-01

The integrity of the various structures within the feet depends on their blood supply. Lesions of the feet often require revascularization, which if successful avoids the need for amputation. To provide greater anatomical detail to aid vascular surgery and imaging, the anatomy and constitution of the deep plantar arch was studied in 50 adult cadaveric feet. The arteries of the foot were injected with red neoprene latex and dissected under magnification. The deep plantar arch, present in all feet, was the result of anastomosis between the deep plantar artery and the deep branch of the lateral plantar artery. The deep plantar artery was predominant in 72% of specimens (Type I arches) and the lateral plantar artery in 22% (Type II), with the contribution being equal in 6% (Type III). The medial plantar artery contributed to the medial segment of the deep plantar arch by its deep branch in 12% of specimens. The distance between the deep plantar arch and each interdigital commissure was generally constant, averaging 29% of total foot length. The deep plantar arch was located in the middle third of the foot in all specimens, being in the distal part of this third in 90%. The deep plantar arch is, therefore formed mainly by the deep plantar artery, a branch of the dorsal artery of foot; its location can be estimated if foot length is known.

Effect of Obesity Level on the Longitudinal Arch in 7- to 12-Year-Old Rural and Urban Children.

PubMed

Woźniacka, Renata; Bac, Aneta; Matusik, Stanisław

2015-11-01

We sought to evaluate the influence of obesity level on the medial longitudinal arch (MLA) of the foot in 7- to 12-year-old children. The study group consisted of 925 children (450 girls and 475 boys). All of the children were subjected to podoscopic foot examination and measurement of weight, height, three skinfolds, fat weight, and fat-free body weight. The most common type of MLA was high-arched foot, which was observed in the left foot of 523 children (56.5%) and in the right foot in 592 children (64%). In almost all of the age groups, high-arched foot was the most common disorder. High-arched foot was more common in girls than in boys, and boys displayed a higher percentage of flatfoot. Also, sex-related differences were more prominent in urban children. There was a strongly positive correlation between obesity level and MLA in the examined group. These results suggest that the type of foot arch is influenced by parameters such as age, sex, and obesity level. High-arched foot seemed to be the most frequent pathologic abnormality in the examined group, and flatfoot, which was predominant in boys and obese children, diminished with age. High-arched foot was a more common MLA type than flatfoot regardless of obesity level assessed on the basis of body mass index and sum of three skinfolds.

Infant orthopedics has no effect on maxillary arch dimensions in the deciduous dentition of children with complete unilateral cleft lip and palate (Dutchcleft).

PubMed

Bongaarts, Catharina A M; van 't Hof, Martin A; Prahl-Andersen, Birte; Dirks, Iris V; Kuijpers-Jagtman, Anne M

2006-11-01

Evaluation of the effect of infant orthopedics on maxillary arch dimensions in the deciduous dentition in patients with unilateral cleft lip and palate. Prospective two-arm randomized controlled clinical trial with three participating cleft palate centers. Cleft palate centers of the Radboud University Nijmegen Medical Center, Academic Center of Dentistry Amsterdam, and University Medical Center Rotterdam, the Netherlands. Children with complete unilateral cleft lip and palate (n = 54) were included. Patients were randomly divided into two groups. Half of the patients (IO+) had a presurgical orthopedic plate until surgical closure of the soft palate at the age of 52 weeks; the other half (IO-) did not undergo presurgical orthopedics. Maxillary arch dimensions were assessed on dental casts at 4 and 6 years of age with measurements for arch width, arch depth, arch length, arch form, and the vertical position of the lesser segment. Contact and collapse were assessed also. There were no clinically significant differences found between IO+ and IO- for any of the variables. Infant orthopedics had no observable effect on the maxillary arch dimensions or on the contact and collapse scores in the deciduous dentition at the ages of 4 and 6 years. Considering the Dutchcleft results to date, there is no need to perform infant orthopedics for unilateral cleft lip and palate patients.

The long-term outcomes of partial arch repair using the frozen elephant trunk technique for distal arch aortic aneurysm.

PubMed

Sueda, Taijiro; Takahashi, Shinya; Katayama, Keijiro; Morita, Shohei; Watanabe, Masazumi; Kurosaki, Tatsuya

2018-06-22

The purpose of this study was to evaluate the long-term results of partial arch repair using the frozen elephant trunk (FET) technique for distal arch aortic aneurysm and to examine the late complications. Thirty-eight patients with true distal arch aortic aneurysms were repaired with FET introduced through an incision in the proximal arch aorta. Follow-up computed tomography was performed every 6 or 12 months in 36 surviving patients. The maximum dimension of the excluded aneurysmal space was measured to determine whether the aneurysmal space had decreased or disappeared. Late complications were also evaluated during the long-term follow-up. There was 1 hospital death (2.6%) and 1 (2.6%) case of paraplegia. There were 2 late sudden deaths (5.2%) thought to be due to aneurysm rupture and arrhythmia. Postoperative serial-computed tomography showed shrinkage of the excluded aneurysmal space in 33 of 36 patients. Late aneurysmal formation occurred in the anastomotic site in three patients. One patient underwent thoracic endovascular stent grafting 10 years after surgery, 1 patient had total arch replacement 9 years after surgery, and 1 died due to rupture. Frozen elephant trunk was found to be a useful alternative for treating true distal arch aortic aneurysm. However, we must be alert for late aneurysmal formation at the incision site.

Advantages of the L-incision approach comprising a combination of left anterior thoracotomy and upper half-median sternotomy for aortic arch aneurysms.

PubMed

Oishi, Yasuhisa; Sonoda, Hiromichi; Tanoue, Yoshihisa; Nishida, Takahiro; Tokunaga, Shigehiko; Nakashima, Atsuhiro; Shiokawa, Yuichi; Tominaga, Ryuji

2011-09-01

Although surgical outcomes of total arch replacement have improved, the strategy for extended arch aneurysms remains controversial. We have applied the L-incision approach (combination of left anterior thoracotomy and upper half-median sternotomy) for total arch replacement for single-stage repair of extensive arch aneurysms. We retrospectively reviewed the operative outcomes of patients who underwent total arch or extended total arch replacement for degenerative aneurysms from 1999 to 2010. Operations were performed via median sternotomy in 47 patients (M group) and the L-incision approach was used in 38 patients (L group). Through the L-incision approach, we were able to complete distal anastomosis below the pulmonary hilus. The L-incision approach has advantages of reducing selective antegrade cerebral perfusion and lower body circulatory arrest times compared with the M group. Recurrent laryngeal nerve palsy and renal dysfunction were less frequent in the L group than those in the M group. Respiratory dysfunction and wound infection were similar between the groups. Hospital mortalities were 5.3% in the L group and 6.4% in the M group. The L-incision approach has similar or better postoperative outcomes compared with the median sternotomy approach. This approach could be useful for single-stage extended total arch replacement with relatively low risk.

Contemporary patterns of surgery and outcomes for aortic coarctation: An analysis of the Society of Thoracic Surgeons Congenital Heart Surgery Database

PubMed Central

Ungerleider, Ross M.; Pasquali, Sara K.; Welke, Karl F.; Wallace, Amelia S.; Ootaki, Yoshio; Quartermain, Michael D.; Williams, Derek A.; Jacobs, Jeffrey P.

2013-01-01

Objective The objective of this study was to describe characteristics and early outcomes across a large multicenter cohort undergoing coarctation or hypoplastic aortic arch repair. Methods Patients undergoing coarctation or hypoplastic aortic arch repair (2006–2010) as their first cardiovascular operation in the Society of Thoracic Surgeons Congenital Heart Surgery Database were included. Group 1 patients consisted of those with coarctation or hypoplastic aortic arch without ventricular septal defect (coarctation or hypoplastic aortic arch, isolated); group 2, coarctation or hypoplastic aortic arch with ventricular septal defect (coarctation or hypoplastic aortic arch, ventricular septal defect); and group 3, coarctation or hypoplastic aortic arch with other major cardiac diagnoses (coarctation or hypoplastic aortic arch, other). Results The cohort included 5025 patients (95 centers): group 1, 2705 (54%); group 2, 840 (17%); and group 3, 1480 (29%). Group 1 underwent coarctation or hypoplastic aortic arch repair at an older age than groups 2 and 3 (groups 1, 2, and 3, 75%, 99%, and 88% < 1 year old, respectively; P<.0001). The most common operative techniques for coarctation or hypoplastic aortic arch repair (group 1) were end-to-end (33%) or extended end-to-end (56%) anastomosis. Overall mortality was 2.4%, and was 1%, 2.5%, and 4.8% for groups 1, 2, and 3 respectively (P < .0001). Ventricular septal defect management strategies for group 2 patients included ventricular septal defect closure (n = 211, 25%), pulmonary artery band (n = 89, 11%), or no intervention (n = 540, 64%) without significant difference in mortality (4%, 1%, 2%; P = .15). Postoperative complications occurred in 36% of patients overall and were more common in groups 2 and 3. There were no occurrences of spinal cord injury (0/973). Conclusions In the current era, primary coarctation or hypoplastic aortic arch repair is performed predominantly in neonates and infants. Overall mortality is low, although those with concomitant defects are at risk for higher morbidity and mortality. The risk of spinal cord injury is lower than previously reported. PMID:23098750

Biomechanics of longitudinal arch support mechanisms in foot orthoses and their effect on plantar aponeurosis strain.

PubMed

Kogler, G F; Solomonidis, S E; Paul, J P

1996-07-01

OBJECTIVE: The purpose of this investigation was to quantify the longitudinal arch support properties of several types of foot orthosis. DESIGN: An in vitro method that simulated 'static stance' was used to determine arch support capabilities, with plantar aponeurosis strain implemented as the performance measure. BACKGROUND: A longitudinal arch support mechanism of an orthosis resists depression of the foot's arches by transferring a portion of the load to the medial structures of the foot. Since the plantar aponeurosis is in tension when the foot is loaded, a quantifiable decrease in strain should occur with an adequate orthotic arch control mechanism. METHODS: A differential variable reluctance transducer was surgically implanted in the plantar aponeurosis of cadaveric donor limb feet (n = 7). Each specimen was mounted in an electromechanical test machine which applied a load of up to 900 N axially to the tibia. The test schedule was divided into seven test conditions: specimen barefoot; specimen with shoe and specimen with shoe and five different orthoses. RESULTS: The University of California Biomechanics Laboratory Shoe Insert and two other foot orthoses significantly decreased the strain in the plantar aponeurosis compared to the barefoot control and were considered effective arch supports (P < 0.05). The functional foot orthosis, stock orthosis, and test shoe did not effectively reduce plantar aponeurosis strain. Significant variations of time required to achieve the specified load levels were recorded among the test conditions, indicating the relative cushioning properties of the shoe/orthosis systems. CONCLUSIONS: The patterns of plantar aponeurosis strain observed in cadaveric tests suggest that certain types of orthoses are more effective than others in the support of the foot's longitudinal arches. It is suggested that to support the longitudinal arches of the foot effectively the medial surface contours of the orthosis must stabilize the apical bony structure of the foot's arch. RELEVANCE: Reducing tension in the plantar aponeurosis is an important treatment objective for orthotic management of plantar fasciitis. Therefore it is of great clinical interest to know whether the longitudinal arch support mechanism of specific foot orthoses have benefits with respect to the loading of the plantar aponeurosis.

Examining Sites of Recent Star Formation in the Galactic Center: A Closer Look at the Arched Filaments and H HII Regions

NASA Astrophysics Data System (ADS)

Hankins, Matthew; Herter, Terry; Lau, Ryan; Morris, Mark; Mills, Elisabeth

2018-01-01

In this dissertation presentation, we analyze mid-infrared imaging of the Arched Filaments and H HII regions in the Galactic center taken with the Faint Object Infrared Camera for the SOFIA Telescope (FORCAST). Examining these regions are of great interest because they provide insights on star formation in the Galactic center and the interactions massive stars have with the ISM. The Arched Filaments are a collection of molecular cloud ridges which are ionized by the nearby Arches star cluster, and give the appearance of large (~25 pc) arch-like structures. The H HII regions are a collection of HII regions just to the west of the Arches cluster (~5-15 pc). The origin of the stars powering the H HII regions is uncertain, as they may have formed in a nearby molecular cloud or could be ejected members of the Arches cluster. FORCAST observations of these regions were used to study the morphology and heating structure of the HII regions, as well as constrain their luminosities.Color-temperature maps of the Arched Filaments created with the FORCAST data reveals fairly uniform dust temperatures (~70-100 K) across the length filaments. The temperature uniformity of the clouds can be explained if they are heated by the Arches cluster but are located at a larger distance from the cluster than they appear. The density of the Arched Filaments clouds was estimated from the FORCAST data and was found to be below the threshold for tidal shearing, indicating that that the clouds will be destroyed by the strong tidal field near the Galactic center. To the west of the Arched Filaments, there is an interesting collection of HII regions, referred to as the H HII regions. These regions are likely heated by massive O/B type stars, and the morphology of the dust emission associated with these objects indicate a mixture of potential in situ formation mechanisms and interlopers. Interestingly, FORCAST imaging of the H HII regions also reveal several compact sources, which may be young embedded stars. We discuss these sources in the context of star formation scenarios in the Galactic center.

5. View northwest at the northeastmost arch of culvert inlet ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. View northwest at the northeastmost arch of culvert inlet headwall, showing high inlet vault and interior drop arch. - Delaware & Raritan Canal, Ten Mile Run Culvert, 1.5 miles South of Blackwells Road, East Millstone, Somerset County, NJ

21. FOREBAY; GATE MECHANISM VISIBLE IN LOWER LEFT; HEADRACE ARCH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. FOREBAY; GATE MECHANISM VISIBLE IN LOWER LEFT; HEADRACE ARCH IS IN NORTH WALL OF FOREBAY, BEHIND MASONRY ARCH IN CENTER; LOOKING NORTHEAST - Crown Roller Mill, 105 Fifth Avenue, South, West Side Milling District, Minneapolis, Hennepin County, MN

2. STONE ARCH BRIDGE. TIMBERS ON THE UPSTREAM FACE OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. STONE ARCH BRIDGE. TIMBERS ON THE UPSTREAM FACE OF THE PIER PROTECTED THE STONEWORK FROM DAMAGE FROM ICE FLOWS, BARGES, ETC. - Lockport Historic District, Stone Arch Bridge, Spanning Des Plaines River at Ninth Street, Lockport, Will County, IL

The Effect of Arch Drop on Tibial Rotation and Tibiofemoral Contact Stress in Postpartum Women.

PubMed

Rabe, Kaitlin; Segal, Neil A; Waheed, Saphia; Anderson, Donald D

2018-04-26

Women are at greater risk for knee osteoarthritis and numerous other lower limb musculoskeletal disorders. Arch drop during pregnancy and the resultant excessive pronation of the feet may alter loading patterns and contribute to the greater prevalence of knee osteoarthritis in women. To determine the effect of arch drop on tibial rotation and tibiofemoral contact stress. Interventional study with internal control. Biomechanics laboratory. Eleven postpartum women (age 33.4 ± 5.3 years, body mass 76.1 ± 13.5 kg) who had lost arch height with pregnancy in a previous study. Subjects underwent standing computed tomography (SCT) with their knees in a 20° fixed-flexed position with and without semirigid arch supports to reconstitute prepregnancy arch height. Magnetic resonance imaging of the knee was acquired at a flexion angle equivalent to that of SCT. Bone and cartilage were manually segmented on the magnetic resonance images and segmented surfaces were registered to the 3-dimensional SCT image sets for the arch-supported and -unsupported conditions. These models were used to measure changes in tibial rotation, as well as to estimate contact stress in the medial and lateral tibiofemoral compartments, using computational methods. Change in tibial rotation and tibiofemoral contact stress with arch drop. Arch drop resulted in a mean tibial internal rotation of 0.75 ± 1.33° (P < .05). Changes in mean or peak contact stress were not detected. Arch drop causes internal tibial rotation, resulting in a shift in the tibiofemoral articulation. An associated increase in contact stress was not detected. Internal rotation of the tibia increases stress on the anterior cruciate ligament and menisci, potentially explaining the greater prevalence of knee disorders in postpartum women. Copyright © 2018 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

The influence of foot orthoses on foot mobility magnitude and arch height index in adults with flexible flat feet.

PubMed

Sheykhi-Dolagh, Roghaye; Saeedi, Hassan; Farahmand, Behshid; Kamyab, Mojtaba; Kamali, Mohammad; Gholizadeh, Hossein; Derayatifar, Amir A; Curran, Sarah

2015-06-01

Flexible flat foot is described as a reduction in the height of the medial longitudinal arch and may occur from abnormal foot pronation. A foot orthosis is thought to modify and control excessive pronation and improve arch height. To compare the immediate effect of three types of orthoses on foot mobility and the arch height index in subjects with flexible flat feet. A quasi-experimental study. The dorsal arch height, midfoot width, foot mobility and arch height index were assessed in 20 participants with flexible flat feet (mean age = 23.2 ± 3 years) for three different foot orthosis conditions: soft, semi-rigid and rigid University of California Biomechanics Laboratory (UCBL). Maximum midfoot width at 90% with arch mobility in the coronal plane was shown in the semi-rigid orthosis condition. The semi-rigid orthosis resulted in the highest mean foot mobility in 90% of weight bearing, and the rigid orthosis (UCBL) had the lowest mean foot mobility. The soft orthosis resulted in foot mobility between that of the rigid and the semi-rigid orthosis. UCBL orthosis showed the highest arch height index, and the semi-rigid orthosis showed the lowest mean arch height index. Due to its rigid structure and long medial-lateral walls, the UCBL orthosis appears to limit foot mobility. Therefore, it is necessary to make an orthosis that facilitates foot mobility in the normal range of the foot arch. Future studies should address the dynamic mobility of the foot with using various types of foot orthoses. Although there are many studies focussed on flat foot and the use of foot orthoses, the mechanism of action is still unclear. This study explored foot mobility and the influence of foot orthoses and showed that a more rigid foot orthosis should be selected based on foot mobility. © The International Society for Prosthetics and Orthotics 2014.

Monitoring system of arch bridge for safety network management

NASA Astrophysics Data System (ADS)

Joo, Bong Chul; Yoo, Young Jun; Lee, Chin Hyung; Park, Ki Tae; Hwang, Yoon Koog

2010-03-01

Korea has constructed the safety management network monitoring test systems for the civil infrastructure since 2006 which includes airport structure, irrigation structure, railroad structure, road structure, and underground structure. Bridges among the road structure include the various superstructure types which are Steel box girder bridge, suspension bridge, PSC-box-girder bridge, and arch bridge. This paper shows the process of constructing the real-time monitoring system for the arch bridge and the measured result by the system. The arch type among various superstructure types has not only the structural efficiency but the visual beauty, because the arch type superstructure makes full use of the feature of curve. The main measuring points of arch bridges composited by curved members make a difference to compare with the system of girder bridges composited by straight members. This paper also shows the method to construct the monitoring system that considers the characteristic of the arch bridge. The system now includes strain gauges and thermometers, and it will include various sensor types such as CCTV, accelerometers and so on additionally. For the long term and accuracy monitoring, the latest optical sensors and equipments are applied to the system.

Thin-plate spline analysis of arch form in a Southern European population with an ideal natural occlusion.

PubMed

Camporesi, Matteo; Franchi, Lorenzo; Baccetti, Tiziano; Antonini, Antonino

2006-04-01

The purpose of the present study was to identify the mean configuration of the clinical arch form in a sample of Southern European subjects with ideal natural occlusion by means of Procrustes analysis, and to compare the identified configuration with 10 commercially produced arch forms by means of thin-plate spline (TPS) analysis. The sample comprised the study casts of 50 subjects (26 males and 24 females). The mean age of the sample was 26 years +/- 4 years. All subjects were young Caucasian adults of Southern European ancestry, and presented with an ideal natural occlusion. The three-dimensional (3D) co-ordinates of all dental points (facial axis points) were digitized using a 3D electromagnetic digitizer. The morphometric technique of TPS analysis with permutation tests was used to compare the configurations of landmarks in the various specimens. No sexual dimorphism was found for either upper or lower arch forms when the shape of the arches was assessed independently from size. The commercially available arch form that showed the least, though statistically significant, shape difference with respect to the average calculated configuration was the Brader arch form.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion.

PubMed

Peixoto, Adriano Porto; dos Santos Pinto, Ary; Garib, Daniela Gamba; Gonçalves, João Roberto

2014-01-01

This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between changes in centroid and gingival points suggested that upper and lower premolars buccaly proclined during the pre-surgical period. Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.

Percutaneous Pediculoplasty for Vertebral Hemangioma Involving the Neural Arch: A Case Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuwa, Sokun, E-mail: sofuwa@luke.or.jp; Numaguchi, Yuji; Kobayashi, Nobuo

2008-01-15

Vertebral hemangiomas occasionally involve the neural arch and they can be symptomatic. We report a case of symptomatic vertebral hemangioma mainly involving the unilateral neural arch which was successfully treated with percutaneous pediculoplasty using a single-needle technique.

ELEVATION VIEW OF THE REX T. BARBER BRIDGE ARCH CONSTRUCTION, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ELEVATION VIEW OF THE REX T. BARBER BRIDGE ARCH CONSTRUCTION, VIEW OF NORTH ARCH FOLLOWING REMOVAL OF TRAVELING FORMWORK, VIEW TO EAST. - Rex T. Barber Veterans Memorial Bridge, Spanning Crooked River Gorge, Dalles-California Highway (US 97), Terrebonne, Deschutes County, OR

PERSPECTIVE VIEW OF THE REX T. BARBER BRIDGE ARCH CONSTRUCTION, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PERSPECTIVE VIEW OF THE REX T. BARBER BRIDGE ARCH CONSTRUCTION, VIEW OF SOUTH TRAVELING FORMWORK AND NORTH ARCH PRIOR TO CLOSURE POUR. - Rex T. Barber Veterans Memorial Bridge, Spanning Crooked River Gorge, Dalles-California Highway (US 97), Terrebonne, Deschutes County, OR

First Branchial Arch Fistula: A Rarity and a Surgical Challenge.

PubMed

Rajkumar, J S; Ganesh, Deepa; Anirudh, J R; Akbar, S; Joshi, Niraj

2016-06-01

Although 2(nd) Branchial arch fistulae (from incomplete closure of Cervical sinus of His) are well known, 1(st) arch fistulae are much rarer (<10%) and are usually not tackled comprehensively. We present a case of a rare first branchial arch fistula of the type II Arnot classification, which presented with two external openings of more than 20 years duration. Patient had a successful resection of all the concerned fistulous tract. Review of literature and the surgical challenges of the procedure are presented herewith.

13. Photocopy of a photographca. 1896showing wooden arch bridge over ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of a photograph--ca. 1896--showing wooden arch bridge over the North Fork of the San Joaquin River northeast of Fresno, CA. This structure was designed by Eastwood as part of the San Joaquin Electric Company's hydro-electric plant; it is a design that indicates his interest in the structural capabilities of the arch before he began building multiple arch dams. Courtesy Mr. Charles Allan Whitney. - Little Rock Creek Dam, Little Rock Creek, Littlerock, Los Angeles County, CA

Variations in tooth size and arch dimensions in Malay schoolchildren.

PubMed

Hussein, Khalid W; Rajion, Zainul A; Hassan, Rozita; Noor, Siti Noor Fazliah Mohd

2009-11-01

To compare the mesio-distal tooth sizes and dental arch dimensions in Malay boys and girls with Class I, Class II and Class III malocclusions. The dental casts of 150 subjects (78 boys, 72 girls), between 12 and 16 years of age, with Class I, Class II and Class III malocclusions were used. Each group consisted of 50 subjects. An electronic digital caliper was used to measure the mesio-distal tooth sizes of the upper and lower permanent teeth (first molar to first molar), the intercanine and intermolar widths. The arch lengths and arch perimeters were measured with AutoCAD software (Autodesk Inc., San Rafael, CA, U.S.A.). The mesio-distal dimensions of the upper lateral incisors and canines in the Class I malocclusion group were significantly smaller than the corresponding teeth in the Class III and Class II groups, respectively. The lower canines and first molars were significantly smaller in the Class I group than the corresponding teeth in the Class II group. The lower intercanine width was significantly smaller in the Class II group as compared with the Class I group, and the upper intermolar width was significantly larger in Class III group as compared with the Class II group. There were no significant differences in the arch perimeters or arch lengths. The boys had significantly wider teeth than the girls, except for the left lower second premolar. The boys also had larger upper and lower intermolar widths and lower intercanine width than the girls. Small, but statistically significant, differences in tooth sizes are not necessarily accompanied by significant arch width, arch length or arch perimeter differences. Generally, boys have wider teeth, larger lower intercanine width and upper and lower intermolar widths than girls.

Elastic energy within the human plantar aponeurosis contributes to arch shortening during the push-off phase of running.

PubMed

Wager, Justin C; Challis, John H

2016-03-21

During locomotion, the lower limb tendons undergo stretch and recoil, functioning like springs that recycle energy with each step. Cadaveric testing has demonstrated that the arch of the foot operates in this capacity during simple loading, yet it remains unclear whether this function exists during locomotion. In this study, one of the arch׳s passive elastic tissues (the plantar aponeurosis; PA) was investigated to glean insights about it and the entire arch of the foot during running. Subject specific computer models of the foot were driven using the kinematics of eight subjects running at 3.1m/s using two initial contact patterns (rearfoot and non-rearfoot). These models were used to estimate PA strain, force, and elastic energy storage during the stance phase. To examine the release of stored energy, the foot joint moments, powers, and work created by the PA were computed. Mean elastic energy stored in the PA was 3.1±1.6J, which was comparable to in situ testing values. Changes to the initial contact pattern did not change elastic energy storage or late stance PA function, but did alter PA pre-tensioning and function during early stance. In both initial contact patterns conditions, the PA power was positive during late stance, which reveals that the release of the stored elastic energy assists with shortening of the arch during push-off. As the PA is just one of the arch׳s passive elastic tissues, the entire arch may store additional energy and impact the metabolic cost of running. Copyright © 2016 Elsevier Ltd. All rights reserved.

A study of the response of nonlinear springs

NASA Technical Reports Server (NTRS)

Hyer, M. W.; Knott, T. W.; Johnson, E. R.

1991-01-01

The various phases to developing a methodology for studying the response of a spring-reinforced arch subjected to a point load are discussed. The arch is simply supported at its ends with both the spring and the point load assumed to be at midspan. The spring is present to off-set the typical snap through behavior normally associated with arches, and to provide a structure that responds with constant resistance over a finite displacement. The various phases discussed consist of the following: (1) development of the closed-form solution for the shallow arch case; (2) development of a finite difference analysis to study (shallow) arches; and (3) development of a finite element analysis for studying more general shallow and nonshallow arches. The two numerical analyses rely on a continuation scheme to move the solution past limit points, and to move onto bifurcated paths, both characteristics being common to the arch problem. An eigenvalue method is used for a continuation scheme. The finite difference analysis is based on a mixed formulation (force and displacement variables) of the governing equations. The governing equations for the mixed formulation are in first order form, making the finite difference implementation convenient. However, the mixed formulation is not well-suited for the eigenvalue continuation scheme. This provided the motivation for the displacement based finite element analysis. Both the finite difference and the finite element analyses are compared with the closed form shallow arch solution. Agreement is excellent, except for the potential problems with the finite difference analysis and the continuation scheme. Agreement between the finite element analysis and another investigator's numerical analysis for deep arches is also good.

Evaluation of arch width variations among different skeletal patterns in South Indian population

PubMed Central

Prasad, Mandava; Kannampallil, Senny Thomas; Talapaneni, Ashok Kumar; George, Suja Ani; Shetty, Sharath Kumar

2013-01-01

Background: Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face. Objective: This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population. Materials and Methods: Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing. Results: The results showed that male arch widths were significantly larger than those of females (P < 0.05) and there was a significant decrease in inter arch width as the MP-SN angle increased in untreated adult South Indian population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race. Conclusion: It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment. PMID:23633842

The Relationships between Foot Arch Volumes and Dynamic Plantar Pressure during Midstance of Walking in Preschool Children

PubMed Central

Chang, Hsun-Wen; Chieh, Hsiao-Feng; Lin, Chien-Ju; Su, Fong-Chin; Tsai, Ming-June

2014-01-01

Objectives The purpose of this study was to examine the correlation between the foot arch volume measured from static positions and the plantar pressure distribution during walking. Methods A total of 27 children, two to six years of age, were included in this study. Measurements of static foot posture were obtained, including navicular height and foot arch volume in sitting and standing positions. Plantar pressure, force and contact areas under ten different regions of the foot were obtained during walking. Results The foot arch index was correlated (r = 0.32) with the pressure difference under the midfoot during the foot flat phase. The navicular heights and foot arch volumes in sitting and standing positions were correlated with the mean forces and pressures under the first (r = −0.296∼−0.355) and second metatarsals (r = −0.335∼−0.504) and midfoot (r = −0.331∼−0.496) during the stance phase of walking. The contact areas under the foot were correlated with the foot arch parameters, except for the area under the midfoot. Conclusions The foot arch index measured in a static position could be a functional index to predict the dynamic foot functions when walking. The foot arch is a factor which will influence the pressure distribution under the foot. Children with a lower foot arch demonstrated higher mean pressure and force under the medial forefoot and midfoot, and lower contact areas under the foot, except for the midfoot region. Therefore, children with flatfoot may shift their body weight to a more medial foot position when walking, and could be at a higher risk of soft tissue injury in this area. PMID:24736650

Origin of the Blytheville Arch, and long-term displacement on the New Madrid seismic zone, central United States

USGS Publications Warehouse

Pratt, Thomas L.; Williams, Robert; Odum, Jackson K.; Stephenson, William J.

2013-01-01

The southern arm of the New Madrid seismic zone of the central United States coincides with the buried, ~110 km by ~20 km Blytheville Arch antiform within the Cambrian–Ordovician Reelfoot rift graben. The Blytheville Arch has been interpreted at various times as a compressive structure, an igneous intrusion, or a sediment diapir. Reprocessed industry seismic-reflection profiles presented here show a strong similarity between the Blytheville Arch and pop-up structures, or flower structures, within strike-slip fault systems. The Blytheville Arch formed in the Paleozoic, but post–Mid-Cretaceous to Quaternary strata show displacement or folding indicative of faulting. Faults within the graben structure but outside of the Blytheville Arch also appear to displace Upper Cretaceous and perhaps younger strata, indicating that past faulting was not restricted to the Blytheville Arch and New Madrid seismic zone. As much as 10–12.5 km of strike slip can be estimated from apparent shearing of the Reelfoot arm of the New Madrid seismic zone. There also appears to be ~5–5.5 km of shearing of the Reelfoot topographic scarp at the north end of the southern arm of the New Madrid seismic zone and of the southern portion of Crowley's Ridge, which is a north-trending topographic ridge just south of the seismic zone. These observations suggest that there has been substantial strike-slip displacement along the Blytheville Arch and southern arm of the New Madrid seismic zone, that strike-slip extended north and south of the modern seismic zone, and that post–Mid-Cretaceous (post-Eocene?) faulting was not restricted to the Blytheville Arch or to currently active faults within the New Madrid seismic zone.

Evaluation of robotic endovascular catheters for arch vessel cannulation.

PubMed

Riga, Celia V; Bicknell, Colin D; Hamady, Mohamad S; Cheshire, Nicholas J W

2011-09-01

Conventional catheter instability and embolization risk limits the adoption of endovascular therapy in patients with challenging arch anatomy. This study investigated whether arch vessel cannulation can be enhanced by a remotely steerable robotic catheter system. Seventeen clinicians with varying endovascular experience cannulated all arch vessels within two computed tomography-reconstructed pulsatile flow phantoms (bovine type I and type III aortic arches), under fluoroscopic guidance, using conventional and robotic techniques. Quantitative (catheterization times, catheter tip movements, vessel wall hits, catheter deflection) and qualitative metrics (Imperial College Complex Endovascular Cannulation Scoring Tool [IC3ST]) performance scores were compared. Robotic catheterization techniques resulted in a significant reduction in median carotid artery cannulation times and the median number of catheter tip movements for all vessels. Vessel wall contact with the aortic arch wall was reduced to a median of zero with robotic catheters. During stiff guidewire exchanges, robotic catheters maintained stability with zero deflection, independent of the distance the catheter was introduced into the carotid vessels. Overall IC3ST performance scores (interquartile range) were significantly improved using the robotic system: Type I arch score was 26/35 (20-30.8) vs 33/35 (31-34; P = .001), and type III arch score was 20.5/35 (16.5-28.5) vs 26.5/35 (23.5-28.8; P = .001). Low- and medium-volume interventionalists demonstrated an improvement in performance with robotic cannulation techniques. The high-volume intervention group did not show statistically significant improvement, but cannulation times, movements, and vessel wall hits were significantly reduced. Robotic technology has the potential to reduce the time, risk of embolization and catheter dislodgement, radiation exposure, and the manual skill required for carotid and arch vessel cannulation, while improving overall performance scores. Copyright © 2011 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Safety and efficacy of retrograde cerebral perfusion as an adjunct for cerebral protection during surgery on the aortic arch.

PubMed

Girardi, Leonard N; Shavladze, Nikolay; Sedrakyan, Art; Neragi-Miandoab, Siyamek

2014-12-01

The best adjunct for cerebral protection during aortic arch reconstruction remains controversial. Retrograde cerebral perfusion (RCP) as an adjunct to profound hypothermic circulatory arrest (PHCA) extends the tolerable period of brain ischemia by flushing emboli and air from the cerebral circulation while maintaining hypothermia. We examined our experience with RCP to determine its efficacy in patients undergoing complex arch reconstruction. We retrospectively evaluated 879 patients undergoing arch reconstruction using RCP from July 1997 to March 2013. Perioperative risk factors were analyzed as predictors of neurologic injury and mortality. Survival for the type of arch reconstruction and for the interval of PHCA was calculated. Of the 879 patients, 671 underwent hemiarch and 208 total arch replacement. The mean age was 65 ± 13.3 years, and 61.6% were men. The total arch patients had longer mean periods of PHCA (39 vs 21 minutes, P < .001) and RCP (37 vs 19 minutes, P < .001). However, the incidence of transient neurologic dysfunction (3.0% vs 2.4%, P < .813) and permanent neurologic dysfunction (1.3% vs 1.9%, P < .519) was similar for both techniques. Mortality was greater in the hemiarch group (4.8% vs 0.5%, P < .003). Patients requiring >40 minutes of PHCA had outcomes similar to those requiring less. The 1-, 5-, and 10-year survival was similar, regardless of the procedure performed or interval of PHCA. RCP is a safe and effective adjunct for cerebral protection during arch surgery. Patients requiring more extensive arch reconstruction are not at greater risk of permanent neurologic dysfunction or perioperative mortality. Copyright © 2014 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Siphon flows in isolated magnetic flux tubes. 3: The equilibrium path of the flux tube arch

NASA Technical Reports Server (NTRS)

Thomas, John H.; Montesinis, Benjamin

1989-01-01

The arched equilibrium path of a thin magnetic flux tube in a plane-stratified, nonmagnetic atmosphere is calculated for cases in which the flux tube contains a steady siphon flow. The large scale mechanical equilibrium of the flux tube involves a balance among the magnetic buoyancy force, the net magnetic tension force due to the curvature of the flux tube axis, and the inertial (centrifugal) force due to the siphon flow along curved streamlines. The ends of the flux tube are assumed to be pinned down by some other external force. Both isothermal and adiabatic siphon flows are considered for flux tubes in an isothermal external atmosphere. For the isothermal case, in the absence of a siphon flow the equilibrium path reduces to the static arch calculated by Parker (1975, 1979). The presence of a siphon flow causes the flux tube arch to bend more sharply, so that magnetic tension can overcome the additional straightening effect of the inertial force, and reduces the maximum width of the arch. The curvature of the arch increases as the siphon flow speed increases. For a critical siphon flow, with supercritical flow in the downstream leg, the arch is asymmetric, with greater curvature in the downstream leg of the arch. Adiabatic flow have qualitatively similar effects, except that adiabatic cooling reduces the buoyancy of the flux tube and thus leads to significantly wider arches. In some cases the cooling is strong enough to create negative buoyancy along sections of the flux tube, requiring upward curvature of the flux tube path along these sections and sometimes leading to unusual equilibrium paths of periodic, sinusoidal form.

Clinical comparison and performance perspective of three aligning arch wires.

PubMed

Evans, T J; Jones, M L; Newcombe, R G

1998-07-01

To clinically evaluate three commonly used orthodontic tooth aligning arch wires: 016 x 022 inch active martensitic medium force nickel titanium, 016 x 022 inch graded force active martensitic nickel titanium, and 0.0155 inch multistrand stainless steel. A prospective randomized clinical trial. Measured serial study casts of dental arches for 112 assigned arch wires from 56 consecutive patients. Analysis based on completed records for 98 arch wires and 51 patients. A consecutive sample of 56 patients requiring both upper and lower fixed appliance therapy were randomly allocated two different arch wires from a possible three under trial. Good quality impressions were taken of the dental arches at the designated serial stages of alignment (start, T0; 4 weeks, T4; 8 weeks, T8). The resultant casts were measured on a Reflex Microscope to record the change in individual tooth alignment both in three and two dimensions (horizontal plane only). The measurement error was within acceptable limits (range, 0.05 to 0.09 mm) and showed no significant bias. ANOVA statistical models were fitted to the data to adjust for a number of variables. No significant difference in aligning capability (p > 0.05), in either two or three dimensions, was demonstrated between the three arch wires in the trial. Heat activated nickel titanium arch wires failed to demonstrate a better performance than the cheaper multistrand stainless steel wires in this randomized clinical trial. The failure to demonstrate in vivo superiority at the clinical level may be due to the confounding effects of large variations in individual metabolic response. Alternatively, it may be that in routine clinical practice NiTi-type wires are not sufficiently deformed to allow their full superelastic properties to come in to play during initial alignment.

Review and resolution of some nomenclatural issues regarding the genus Psoroptes (Acari: Psoroptidae), scab-mites of domestic and wild mammals.

PubMed

OConnor, Barry M; Klimov, Pavel B

2015-07-01

Some classifications recognize a number of species in the scab-mite genus, Psoroptes, mites that are of considerable importance in livestock production and veterinary medicine. However, modern studies suggest that populations from some host species are not morphologically or genetically distinct, creating taxonomic confusion with older names, which treated mites from different hosts as separate species. We review the taxonomy and nomenclature of the genus and the two oldest binomens, most recently known as Psoroptes ovis and Psoroptes equi. Prior authors have attributed these names to various authorities, with most attributing both names to Hering (Nova Acta Phys-Med Acad Caesar Leopold-Carol Nat Curios 18(2):573-624, 1838). In particular, the priority between these names was recently a point of contention, with P. ovis being treated as junior synonym of P. equi. A review of all relevant nineteenth and twentieth century publications indicates, however, that these binomens should be cited as P. ovis (Viborg in Veterinair-Selskabets Skrifter 2:139-152, 1813) and P. equi (Raspail in Bull gener Theraput Med Chir 7:169-184, 1834), with the former having priority over the latter assuming their conspecificity. We also clarify attribution of the authorship and the type species of the genus Psoroptes.

Transforce lingual appliances pre-adjusted invisible appliances simplify treatment.

PubMed

Clark, William John

2011-01-01

Transforce lingual appliances are designed to be used in conjunction with conventional fixed appliances. Lingual arch development is normally followed by bonded fixed appliances to detail the occlusion. Alternatively Transforce appliance treatment is an efficient method of preparing complex malocclusions prior to a finishing stage with invisible appliances. This approach is ideal for adult treatment, using light continuous forces for arch development with appliances that are comfortable to wear. Sagittal and Transverse appliances are designed for arch development in a range of sizes for contracted arches. They can be used to treat all classes of malocclusion and are pre-adjusted fixed/removable devices for non-compliance treatment. Force modules with nickel titanium coil springs enclosed in a tube deliver a gentle, biocompatible continuous force with a long range of action. They are excellent for mixed dentition and ideal for adult arch development. There are multiple sizes for upper and lower arch development and a sizing chart may be placed over a study model for correct selection, eliminating the need for laboratory work.

Siphon flows in isolated magnetic flux tubes. III - The equilibrium path of the flux-tube arch

NASA Technical Reports Server (NTRS)

Thomas, John H.; Montesinos, Benjamin

1990-01-01

It is shown how to calculate the equilibrium path of a thin magnetic flux tube in a stratified, nonmagnetic atmosphere when the flux tube contains a steady siphon flow. The equilbrium path of a static thin flux tube in an infinite stratified atmosphere generally takes the form of a symmetric arch of finite width, with the flux tube becoming vertical at either end of the arch. A siphon flow within the flux tube increases the curvature of the arched equilibrium path in order that the net magnetic tension force can balance the inertial force of the flow, which tries to straighten the flux tube. Thus, a siphon flow reduces the width of the arched equilibrium path, with faster flows producing narrower arches. The effect of the siphon flow on the equilibrium path is generally greater for flux tubes of weaker magnetic field strength. Examples of the equilibrium are shown for both isothemal and adiabatic siphon flows in thin flux tubes in an isothermal external atmosphere.

The hypothenar radial arch, a genetically determined epidermal ridge configuration.

PubMed

Holt, S B

1975-03-01

A radial arch in the hypothenar area of the human palm is an uncommon ridge arrangement. It is associated with an ulnar triradius and no axial triradius is present. The configuration generally occurs on right hands but is sometimes found on both hands. The frequency in the few European populations studied and in one Canadian sample varies from 0.2 per cent to over 2 per cent of persons. Hypothenar radial arches have also been reported in patients with abnormal sex chromosomes but are not specific to any karyotype. Two families are described in which nearly related persons have hypothenar radial arches. They provide the first evidence that the pattern is inherited. In one family three out of six sibs have radial arches in the hypothenar area and so have two out of three children of one of them. In the other family a pair of identical twins and their mother have hypothenar radial arches. It is suggested that, from the information available, inheritance is probably due to a recessive gene.

Generalized lattice Boltzmann model for flow through tight porous media with Klinkenberg's effect

NASA Astrophysics Data System (ADS)

Chen, Li; Fang, Wenzhen; Kang, Qinjun; De'Haven Hyman, Jeffrey; Viswanathan, Hari S.; Tao, Wen-Quan

2015-03-01

Gas slippage occurs when the mean free path of the gas molecules is in the order of the characteristic pore size of a porous medium. This phenomenon leads to Klinkenberg's effect where the measured permeability of a gas (apparent permeability) is higher than that of the liquid (intrinsic permeability). A generalized lattice Boltzmann model is proposed for flow through porous media that includes Klinkenberg's effect, which is based on the model of Guo et al. [Phys. Rev. E 65, 046308 (2002), 10.1103/PhysRevE.65.046308]. The second-order Beskok and Karniadakis-Civan's correlation [A. Beskok and G. Karniadakis, Microscale Thermophys. Eng. 3, 43 (1999), 10.1080/108939599199864 and F. Civan, Transp. Porous Med. 82, 375 (2010), 10.1007/s11242-009-9432-z] is adopted to calculate the apparent permeability based on intrinsic permeability and the Knudsen number. Fluid flow between two parallel plates filled with porous media is simulated to validate the model. Simulations performed in a heterogeneous porous medium with components of different porosity and permeability indicate that Klinkenberg's effect plays a significant role on fluid flow in low-permeability porous media, and it is more pronounced as the Knudsen number increases. Fluid flow in a shale matrix with and without fractures is also studied, and it is found that the fractures greatly enhance the fluid flow and Klinkenberg's effect leads to higher global permeability of the shale matrix.

SU-E-T-195: Commissioning the Neutron Production of a Varian TrueBeam Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irazola, L; Brualla, L; Rosello, J

2015-06-15

Purpose: The purpose of this work is the characterization of a new Varian TrueBeam™ facility in terms of neutron production, in order to estimate neutron equivalent dose in organs during radiotherapy treatments. Methods: The existing methodology [1] was used with the reference SRAMnd detector, calibrated in terms of thermal neutron fluence at the reference field operated by PTB (Physikalisch-Technische-Bundesanstalt) at the GeNF (Geesthacht-Neutron-Facility) with the GKSS reactor FRG-1 [2]. Thermal neutron fluence for the 5 available possibilities was evaluated: 15 MV and 10&6 MV with and without Flattening Filter (FF and FFF, respectively). Irradiation conditions are as described in [3].more » In addition, three different collimator-MLC configurations were studied for 15 MV: (a) collimator of 10×10 cm{sup 2} and MLC fully retracted (reference), (b) field sizes of 20×20 cm{sup 2} and 10×10 cm{sup 2} for collimator and MLC respectively, and (c) collimator and MLC aperture of 10×10 cm{sup 2}. Results: Thermal fluence rate at the “reference point” [3], as a consequence of the neutron production, obtained for (a) conformation in 15 MV is (1.45±0.11) x10{sup 4} n•cm{sup 2}/MU. Configurations (b) and (c) gave fluences of 96.6% and 97.8% of the reference (a). Neutron production decreases up to 8.6% and 5.7% for the 10 MV FF and FFF beams, respectively. Finally, it decreases up to 2.8% and 0.1% for the 6 MV FF and FFF modes, respectively. Conclusion: This work evaluates thermal neutron production of Varian TrueBeam™ system for organ equivalent dose estimation. The small difference in collimator-MLC configuration shows the universality of the methodology [3]. A decrease in this production is shown when decreasing energy from 15 to 10 MV and an almost negligible production was found for 6 MV. Moreover, a lower neutron contribution is observed for the FFF modes.[1]Phys Med Biol,2012;57:6167–6191.[2]Radiat Meas,2010;45:1513–1517.[3]Med Phys,2015;42:276–281.« less

SU-E-T-365: Estimation of Neutron Ambient Dose Equivalents for Radioprotection Exposed Workers in Radiotherapy Facilities Based On Characterization Patient Risk Estimation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irazola, L; Terron, J; Sanchez-Doblado, F

2015-06-15

Purpose: Previous measurements with Bonner spheres{sup 1} showed that normalized neutron spectra are equal for the majority of the existing linacs{sup 2}. This information, in addition to thermal neutron fluences obtained in the characterization procedure{sup 3}3, would allow to estimate neutron doses accidentally received by exposed workers, without the need of an extra experimental measurement. Methods: Monte Carlo (MC) simulations demonstrated that the thermal neutron fluence distribution inside the bunker is quite uniform, as a consequence of multiple scatter in the walls{sup 4}. Although inverse square law is approximately valid for the fast component, a more precise calculation could bemore » obtained with a generic fast fluence distribution map around the linac, from MC simulations{sup 4}. Thus, measurements of thermal neutron fluences performed during the characterization procedure{sup 3}, together with a generic unitary spectra{sup 2}, would allow to estimate the total neutron fluences and H*(10) at any point{sup 5}. As an example, we compared estimations with Bonner sphere measurements{sup 1}, for two points in five facilities: 3 Siemens (15–23 MV), Elekta (15 MV) and Varian (15 MV). Results: Thermal neutron fluences obtained from characterization, are within (0.2–1.6×10{sup 6}) cm−{sup 2}•Gy{sup −1} for the five studied facilities. This implies ambient equivalent doses ranging from (0.27–2.01) mSv/Gy 50 cm far from the isocenter and (0.03–0.26) mSv/Gy at detector location with an average deviation of ±12.1% respect to Bonner measurements. Conclusion: The good results obtained demonstrate that neutron fluence and H*(10) can be estimated based on: (a) characterization procedure established for patient risk estimation in each facility, (b) generic unitary neutron spectrum and (c) generic MC map distribution of the fast component. [1] Radiat. Meas (2010) 45: 1391 – 1397; [2] Phys. Med. Biol (2012) 5 7:6167–6191; [3] Med. Phys (2015) 42:276 - 281. [4] IFMBE (2012) 39: 1245–1248. [5] ICRU Report 57 (1998)« less

Characterization of a prototype MR-compatible Delta4 QA system in a 1.5 tesla MR-linac

NASA Astrophysics Data System (ADS)

de Vries, J. H. W.; Seravalli, E.; Houweling, A. C.; Woodings, S. J.; van Rooij, R.; Wolthaus, J. W. H.; Lagendijk, J. J. W.; Raaymakers, B. W.

2018-01-01

To perform patient plan quality assurance (QA) on a newly installed MR-linac (MRL) it is necessary to have an MR-compatible QA device. An MR compatible device (MR-Delta4) has been developed together with Scandidos AB (Uppsala, Sweden). The basic characteristics of the detector response, such as short-term reproducibility, dose linearity, field size dependency, dose rate dependency, dose-per-pulse dependency and angular dependency, were investigated for the clinical Delta4-PT as well as for the MR compatible version. All tests were performed with both devices on a conventional linac and the MR compatible device was tested on the MRL as well. No statistically significant differences were found in the short-term reproducibility (<0.1%), dose linearity (⩽0.5%), field size dependency (<2.0% for field sizes larger than 5  ×  5 cm2), dose rate dependency (<1.0%) or angular dependency for any phantom/linac combination. The dose-per-pulse dependency (<0.8%) was found to be significantly different between the two devices. This difference can be explained by the fact that the diodes in the clinical Delta4-PT were irradiated with a much larger dose than the MR-Delta4-PT ones. The absolute difference between the devices (<0.5%) was found to be small, so no clinical impact is expected. For both devices, the results were consistent with the characteristics of the Delta4-PT device reported in the literature (Bedford et al 2009 Phys. Med. Biol. 54 N167-76 Sadagopan et al 2009 J. Appl. Clin. Med. Phys. 10 2928). We found that the characteristics of the MR compatible Delta4 phantom were found to be comparable to the clinically used one. Also, the found characteristics do not differ from the previously reported characteristics of the commercially available non-MR compatible Delta4-PT phantom. Therefore, the MR compatible Delta4 prototype was found to be safe and effective for use in the 1.5 tesla magnetic field of the Elekta MR-linac

Analysis of metabolic washout of positron emitters produced during carbon ion head and neck radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helmbrecht, Stephan; Enghardt, Wolfgang; Parodi, Katia

2013-09-15

Purpose: Particle Therapy Positron Emission Tomography (PT-PET) is a suitable method for verification of therapeutic dose delivery by measurements of irradiation-induced β{sup +}-activity. Due to metabolic processes in living tissue β{sup +}-emitters can be removed from the place of generation. This washout is a limiting factor for image quality. The purpose of this study is to investigate whether a washout model obtained by animal experiments is applicable to patient data.Methods: A model for the washout has been developed by Mizuno et al. [Phys. Med. Biol. 48(15), 2269–2281 (2003)] and Tomitani et al. [Phys. Med. Biol. 48(7), 875–889 (2003)]. It ismore » based upon measurements in a rabbit in living and dead conditions. This model was modified and applied to PET data acquired during the experimental therapy project at GSI Helmholtzzentrum für Schwerionenforschung Darmstadt, Germany. Three components are expected: A fast one with a half life of 2 s, a medium one in the range of 2–3 min, and a slow component of the order of 2–3 h. Ten patients were selected randomly for investigation of the fast component. To analyze the other two components, 12 one-of-a-kind measurements from a single volunteer patient are available.Results: A fast washout on the time scale of a few seconds was not observed in the patient data. The medium processes showed a mean half life of 155.7 ± 4.6 s. This is in the expected range. Fractions of the activity not influenced by the washout were found.Conclusions: On the time scale of an in-beam or in-room measurement only the medium-time washout processes play a remarkable role. A slow component may be neglected if the measurements do not exceed 20 min after the end of the irradiation. The fast component is not observed due to the low relative blood filled volume in the brain.« less

The origin of the flatbed scanner artifacts in radiochromic film dosimetry—key experiments and theoretical descriptions

NASA Astrophysics Data System (ADS)

Schoenfeld, Andreas A.; Wieker, Soeren; Harder, Dietrich; Poppe, Bjoern

2016-11-01

The optical origin of the lateral response and orientation artifacts, which occur when using EBT3 and EBT-XD radiochromic films together with flatbed scanners, has been reinvestigated by experimental and theoretical means. The common feature of these artifacts is the well-known parabolic increase in the optical density OD(x)  =  -log10 I(x)/I 0(x) versus offset x from the scanner midline (Poppinga et al 2014 Med. Phys. 41 021707). This holds for landscape and portrait orientations as well as for the three color channels. Dose-independent optical subjects, such as neutral density filters, linear polarizers, the EBT polyester foil and diffusive glass, also present the parabolic lateral artifact when scanned with a flatbed scanner. The curvature parameter c of the parabola function OD(x)  =  c 0  +  cx 2 is found to be a linear function of the dose, the parameters of which are influenced by the film orientation and film type, EBT3 or EBT-XD. The ubiquitous parabolic shape of function OD(x) is attributed (a) to the optical path-length effect (van Battum et al 2016 Phys. Med. Biol. 61 625-49), due to the increasing obliquity of the optical scanner light associated with increasing offset x from the scanner midline, and (b) and (c) to the partial polarization and scattering of the light leaving the film, which affect the ratio ~I(x)/{{I}0}(x) , thus making OD(x) increase with x 2. The orientation effect results from the changes of effects (b) and (c) associated with turning the film position, and thereby the orientation of the polymer structure of the sensitive film layer. In a comparison of experimental results obtained with selected optical subjects, the relative weights of the contributions of the optical path-length effect and the polarization and scattering of light leaving the films to the lateral response artifact have been estimated to be of the same order of magnitude. Mathematical models of these causes for the parabolic shape of function OD(x) are given as appendices.

The origin of the flatbed scanner artifacts in radiochromic film dosimetry-key experiments and theoretical descriptions.

PubMed

Schoenfeld, Andreas A; Wieker, Soeren; Harder, Dietrich; Poppe, Bjoern

2016-11-07

The optical origin of the lateral response and orientation artifacts, which occur when using EBT3 and EBT-XD radiochromic films together with flatbed scanners, has been reinvestigated by experimental and theoretical means. The common feature of these artifacts is the well-known parabolic increase in the optical density OD(x)  =  -log 10 I(x)/I 0 (x) versus offset x from the scanner midline (Poppinga et al 2014 Med. Phys. 41 021707). This holds for landscape and portrait orientations as well as for the three color channels. Dose-independent optical subjects, such as neutral density filters, linear polarizers, the EBT polyester foil and diffusive glass, also present the parabolic lateral artifact when scanned with a flatbed scanner. The curvature parameter c of the parabola function OD(x)  =  c 0   +  cx 2 is found to be a linear function of the dose, the parameters of which are influenced by the film orientation and film type, EBT3 or EBT-XD. The ubiquitous parabolic shape of function OD(x) is attributed (a) to the optical path-length effect (van Battum et al 2016 Phys. Med. Biol. 61 625-49), due to the increasing obliquity of the optical scanner light associated with increasing offset x from the scanner midline, and (b) and (c) to the partial polarization and scattering of the light leaving the film, which affect the ratio [Formula: see text], thus making OD(x) increase with x 2 . The orientation effect results from the changes of effects (b) and (c) associated with turning the film position, and thereby the orientation of the polymer structure of the sensitive film layer. In a comparison of experimental results obtained with selected optical subjects, the relative weights of the contributions of the optical path-length effect and the polarization and scattering of light leaving the films to the lateral response artifact have been estimated to be of the same order of magnitude. Mathematical models of these causes for the parabolic shape of function OD(x) are given as appendices.

Ethical violations and discriminatory behavior in the MedPhys Match.

PubMed

Hendrickson, Kristi R G; Juang, Titania; Rodrigues, Anna; Burmeister, Jay W

2017-09-01

The purpose of this survey study is to investigate behaviors in conflict with the ethical standards of the Medical Physics Residency (MedPhys) Match (MPM) process as stated in the MPM rules (a) and with the nondiscrimination regulations of the Equal Employment Opportunity Commission (EEOC) (b), in addition to other behaviors that may in other ways erode the fairness of the system. A survey was sent to all applicants and program directors registered for the 2015 and 2016 MPM. Survey questions asked about application, interview, and postinterview experiences, match results, and overall satisfaction with the process. Thirteen percent of 2015 respondents and 20% of 2016 respondents were asked by at least one program how highly they planned to rank them or which program they would rank first. Thirty-seven percent of 2015 and 40% of 2016 program directors indicated that candidates communicated to the program their rank intent, with 22.0% in 2015 and 12.5% in 2016 being told that their program would be ranked first. Twenty-three percent of 2015 respondents indicated being asked by at least one program during the interview about children or plans to have children; including 19% of males and 33% of females. In 2016, these values were 28% overall, 22% male, and 36% female. Fifty-seven percent of 2015 respondents who were asked this question indicated being uncomfortable or very uncomfortable answering, including 27.3% of males and 88.9% of females. In 2016, 42.9% of all respondents indicated being uncomfortable or very uncomfortable answering, including 10.0% of males and 80.0% of females. In the first two years of the MPM, there were widespread instances of ethical violations and discriminatory questioning during the interview process. Educating both interviewers and candidates on the MPM rules and general EEOC guidelines should decrease these instances and increase the fairness of the residency selection process. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

SU-F-I-75: Half-Value Layer Thicknesses and Homogeneity Coefficients for Fluoroscopic X-Ray Beam Spectra Incorporating Spectral Filtration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wunderle, K; Wayne State University School of Medicine, Detroit, MI; Godley, A

Purpose: The purpose of this investigation is to quantify various first half-value-layers (HVLs), second HVLs and homogeneity coefficients (HCs) for a state-of-the-art fluoroscope utilizing spectral (copper) filtration. Methods: A Radcal (Monrovia, Ca) AccuPro dosimeter with a 10×6-6 calibrated ionization chamber was used to measure air kerma for radiographic x-ray exposures made on a Siemens (Erlangen, Germany) Artis ZeeGo fluoroscope operated in the service mode. The ionization chamber was centered in the x-ray beam at 72 cm from the focal spot with a source-to-image-distance of 120 cm. The collimators were introduced to limit the x-ray field to approximately 5 cm ×more » 5 cm at the ionization chamber plane. Type-1100 aluminum filters, in 0.5 mm increments, were used to determine the HVL. Two HVL calculation methods were used, log-linear interpolation and Lambert-W interpolation as described by Mathieu [Med Phys, 38(8), 4546 (2011)]. Multiple measurements were made at 60, 80, 100, 120 kVp at spectral filtration thicknesses of 0, 0.1, 0.3, 0.6 and 0.9 mm. Results: First HVL, second HVL, and HCs are presented for the fluoroscopic x-ray beam spectra indicated above, with nearly identical results from the two interpolation methods. Accuracy of the set kVp was also determined and deviated less than 2%. First HVLs for fluoroscopic x-ray beam spectra without spectral filtration determined in our study were 7%–16% greater than previously published data by Fetterly et al. [Med Phys, 28, 205 (2001)]. However, the FDA minimum HVL requirements changed since that publication, requiring larger HVLs as of 2006. Additionally, x-ray tube and generator architecture have substantially changed over the last 15 years providing different beam spectra. Conclusion: X-ray beam quality characteristics for state-of-the-art fluoroscopes with spectral filtration have not been published. This study provides reference data which will be useful for defining beam qualities encountered on fluoroscopes using spectral filtration.« less

A quantitative method for defining high-arched palate using the Tcof1(+/-) mutant mouse as a model.

PubMed

Conley, Zachary R; Hague, Molly; Kurosaka, Hiroshi; Dixon, Jill; Dixon, Michael J; Trainor, Paul A

2016-07-15

The palate functions as the roof of the mouth in mammals, separating the oral and nasal cavities. Its complex embryonic development and assembly poses unique susceptibilities to intrinsic and extrinsic disruptions. Such disruptions may cause failure of the developing palatal shelves to fuse along the midline resulting in a cleft. In other cases the palate may fuse at an arch, resulting in a vaulted oral cavity, termed high-arched palate. There are many models available for studying the pathogenesis of cleft palate but a relative paucity for high-arched palate. One condition exhibiting either cleft palate or high-arched palate is Treacher Collins syndrome, a congenital disorder characterized by numerous craniofacial anomalies. We quantitatively analyzed palatal perturbations in the Tcof1(+/-) mouse model of Treacher Collins syndrome, which phenocopies the condition in humans. We discovered that 46% of Tcof1(+/-) mutant embryos and new born pups exhibit either soft clefts or full clefts. In addition, 17% of Tcof1(+/-) mutants were found to exhibit high-arched palate, defined as two sigma above the corresponding wild-type population mean for height and angular based arch measurements. Furthermore, palatal shelf length and shelf width were decreased in all Tcof1(+/-) mutant embryos and pups compared to controls. Interestingly, these phenotypes were subsequently ameliorated through genetic inhibition of p53. The results of our study therefore provide a simple, reproducible and quantitative method for investigating models of high-arched palate. Copyright © 2015 Elsevier Inc. All rights reserved.

A quantitative method for defining high-arched palate using the Tcof1+/− mutant mouse as a model

PubMed Central

Conley, Zachary R.; Hague, Molly; Kurosaka, Hiroshi; Dixon, Jill; Dixon, Michael J.; Trainor, Paul A.

2016-01-01

The palate functions as the roof of the mouth in mammals, separating the oral and nasal cavities. Its complex embryonic development and assembly poses unique susceptibilities to intrinsic and extrinsic disruptions. Such disruptions may cause failure of the developing palatal shelves to fuse along the midline resulting in a cleft. In other cases the palate may fuse at an arch, resulting in a vaulted oral cavity, termed high-arched palate. There are many models available for studying the pathogenesis of cleft palate but a relative paucity for high-arched palate. One condition exhibiting either cleft palate or high-arched palate is Treacher Collins syndrome, a congenital disorder characterized by numerous craniofacial anomalies. We quantitatively analyzed palatal perturbations in the Tcof1+/− mouse model of Treacher Collins syndrome, which phenocopies the condition in humans. We discovered that 46% of Tcof1+/− mutant embryos and new born pups exhibit either soft clefts or full clefts. In addition, 17% of Tcof1+/− mutants were found to exhibit high-arched palate, defined as two sigma above the corresponding wild-type population mean for height and angular based arch measurements. Furthermore, palatal shelf length and shelf width were decreased in all Tcof1+/− mutant embryos and pups compared to controls. Interestingly, these phenotypes were subsequently ameliorated through genetic inhibition of p53. The results of our study therefore provide a simple, reproducible and quantitative method for investigating models of high-arched palate. PMID:26772999

Aqua splint suture technique in isolated zygomatic arch fractures.

PubMed

Kim, Dong-Kyu; Kim, Seung Kyun; Lee, Jun Ho; Park, Chan Hum

2014-04-01

Various methods have been used to treat zygomatic arch fractures, but no optimal modality exists for reducing these fractures and supporting the depressed bone fragments without causing esthetic problems and discomfort for life. We developed a novel aqua splint and suture technique for stabilizing isolated zygomatic arch fractures. The objective of this study is to evaluate the effect of novel aqua splint and suture technique in isolated zygomatic arch fractures. Patients with isolated zygomatic arch fractures were treated by a single surgeon in a single center from January 2000 through December 2012. Classic Gillies approach without external fixation was performed from January 2000 to December 2003, while the novel technique has been performed since 2004. 67 consecutive patients were included (Classic method, n = 32 and Novel method, n = 35). An informed consent was obtained from all patients. The novel aqua splint and suture technique was performed by the following fashion: first, we evaluated intraoperatively the bony alignment by ultrasonography and then, reduced the depressed fracture surgically using the Gillies approach. Thereafter, to stabilize the fracture and obtain the smooth facial figure, we made an aqua splint that fit the facial contour and placed monofilament nonabsorbable sutures around the fractured zygomatic arch. The novel aqua splint and suture technique showed significantly correlated with better cosmetic and functional results. In conclusion, the aqua splint suture technique is very simple, quick, safe, and effective for stabilizing repositioned zygomatic arch fractures. The aqua splint suture technique can be a good alternative procedure in isolated zygomatic arch fractures.

How Arch Support Insoles Help Persons with Flatfoot on Uphill and Downhill Walking.

PubMed

Huang, Yu-Ping; Kim, Kwantae; Song, Chen-Yi; Chen, Yat-Hon; Peng, Hsien-Te

2017-01-01

The main purpose of this study was to investigate the effect of arch support insoles on uphill and downhill walking of persons with flatfoot. Sixteen healthy college students with flatfoot were recruited in this study. Their heart rate, peak oxygen uptake (VO 2 ), and median frequency (MDF) of surface electromyogram were recorded and analyzed. Nonparametric Wilcoxon signed-rank test was used for statistical analysis. The main results were as follows: (a) peak VO 2 significantly decreased with arch support insoles compared with flat insoles during uphill and downhill walking (arch support insole versus flat insole: uphill walking, 20.7 ± 3.6 versus 31.6 ± 5.5; downhill walking, 10.9 ± 2.3 versus 16.9 ± 4.2); (b) arch support insoles could reduce the fatigue of the rectus femoris muscle during downhill walking (MDF slope of arch support insole: 0.03 ± 1.17, flat insole: -6.56 ± 23.07); (c) insole hardness would increase not only the physical sensory input but also the fatigue of lower-limb muscles particularly for the rectus femoris muscle (MDF slope of arch support insole: -1.90 ± 1.60, flat insole: -0.83 ± 1.10) in persons with flatfoot during uphill walking. The research results show that arch support insoles could effectively be applied to persons with flatfoot to aid them during uphill and downhill walking.

Quantification of motion of the thoracic aorta after ascending aortic repair of type-A dissection.

PubMed

Suh, Ga-Young; Fleischmann, Dominik; Beygui, Ramin E; Cheng, Christopher P

2017-05-01

To quantify cardiac and respiratory deformations of the thoracic aorta after ascending aortic graft repair. Eight patients were scanned with cardiac-resolved computed tomography angiography during inspiratory/expiratory breath-holds. Aortic centerlines and lumen were extracted to compute the arclength, curvature, angulation, and cross-section shape. From systole to diastole, the angle of graft [Formula: see text] arch increased by 2.4[Formula: see text] ± 1.8[Formula: see text] (P < 0.01) and the angle of arch [Formula: see text] descending aorta decreased by 2.4[Formula: see text] ± 2.6[Formula: see text] (P < 0.05), while the effective diameter of the proximal arch decreased by 2.4 ± 1.9% (P < 0.01), a greater change than those of the graft or distal arch (P < 0.05). From inspiration to expiration, the angle of graft [Formula: see text] arch increased by 2.8[Formula: see text] ± 2.6[Formula: see text] (P < 0.02) with the peak curvature increase (P < 0.05). Shorter graft length was correlated with greater cardiac-induced graft [Formula: see text] arch angulation, and longer graft length was correlated with greater respiratory-induced arch [Formula: see text] descending aorta angulation (R [Formula: see text] 0.50). The thoracic aorta changed curvature and angulation with cardiac and respiratory influences, driven by aortic root and arch motion. The thoracic aortic geometry and deformation are correlated with the ascending aortic graft length.

Holocephalan embryos provide evidence for gill arch appendage reduction and opercular evolution in cartilaginous fishes

PubMed Central

Gillis, J. Andrew; Rawlinson, Kate A.; Bell, Justin; Lyon, Warrick S.; Baker, Clare V. H.; Shubin, Neil H.

2011-01-01

Chondrichthyans possess endoskeletal appendages called branchial rays that extend laterally from their hyoid and gill-bearing (branchial) arches. Branchial ray outgrowth, like tetrapod limb outgrowth, is maintained by Sonic hedgehog (Shh) signaling. In limbs, distal endoskeletal elements fail to form in the absence of normal Shh signaling, whereas shortened duration of Shh expression correlates with distal endoskeletal reduction in naturally variable populations. Chondrichthyans also exhibit natural variation with respect to branchial ray distribution—elasmobranchs (sharks and batoids) possess a series of ray-supported septa on their hyoid and gill arches, whereas holocephalans (chimaeras) possess a single hyoid arch ray-supported operculum. Here we show that the elongate hyoid rays of the holocephalan Callorhinchus milii grow in association with sustained Shh expression within an opercular epithelial fold, whereas Shh is only transiently expressed in the gill arches. Coincident with this transient Shh expression, branchial ray outgrowth is initiated in C. milii but is not maintained, yielding previously unrecognized vestigial gill arch branchial rays. This is in contrast to the condition seen in sharks, where sustained Shh expression corresponds to the presence of fully formed branchial rays on the hyoid and gill arches. Considered in light of current hypotheses of chondrichthyan phylogeny, our data suggest that the holocephalan operculum evolved in concert with gill arch appendage reduction by attenuation of Shh-mediated branchial ray outgrowth, and that chondrichthyan branchial rays and tetrapod limbs exhibit parallel developmental mechanisms of evolutionary reduction. PMID:21220324

Complete overdentures retained by mini implants: A systematic review.

PubMed

Lemos, Cleidiel Aparecido Araujo; Verri, Fellippo Ramos; Batista, Victor Eduardo de Souza; Júnior, Joel Ferreira Santiago; Mello, Caroline Cantieri; Pellizzer, Eduardo Piza

2017-02-01

The purpose of this systematic review was to evaluate the use of mini implants to retain complete overdentures in terms of survival rates of mini implants, marginal bone loss, satisfaction, and quality of life. This report followed the PRISMA Statement and PICO question. This review has been registered at PROSPERO under the number CRD42016036141. Two independent reviewers performed a comprehensive search of studies published until September 2016 and listed in the PubMed/MEDLINE, Embase, and The Cochrane Library databases. The focused question was: is the use of mini implants feasible for prosthodontic rehabilitation with complete overdentures? The 24 studies selected for review evaluated 1273 patients whose mean age was 65.93 years; these patients had received 2494 mini implants and 386 standard implants for retaining overdenture prosthesis. The mean follow-up time was 2.48 years (range: 1-7 years). There was a higher survival rate of mini implants (92.32%). More frequent failures for maxillary (31.71%) compared with mandibular arches (4.89%). The majority of studies revealed marginal bone loss values similar to those of standard implants (<1.5mm). All studies verified an increase in satisfaction and quality of life after rehabilitation treatment with mini dental implants. The present systematic review indicates that the use of mini implants for retaining overdenture prosthesis is considered an alternative treatment when standard treatment is not possible, since it presents high survival rates, acceptable marginal bone loss, and improvements in variables related to satisfaction and quality of life. Based on the results of this study, the use of a minimum 4 and 6 mini implants can be considered a satisfactory treatment option for rehabilitation of the mandibular and maxillary arches respectively with a complete overdenture. Copyright © 2016. Published by Elsevier Ltd.

The management of newborns with esophageal atresia and right aortic arch: A systematic review or still unsolved problem.

PubMed

Parolini, Filippo; Armellini, Andrea; Boroni, Giovanni; Bagolan, Pietro; Alberti, Daniele

2016-02-01

The management of newborns with esophageal atresia (EA) and right aortic arch (RAA) is still an unsolved problem. This study provides a systematic review of epidemiology, diagnosis, management and short-term results of children with EA and RAA. The PubMed database was searched for original studies on children with EA and RAA. In each study, data were extracted for the following outcomes: number of patients, associated anomalies, type of surgical repair, morbidity and mortality rate. Eight studies were selected, including 54 patients with EA and RAA. RAA was encountered in 3.6% of infants. Preoperative detection of RAA was reported in 7 of them. In these patients, primary anastomosis was achieved through the right approach in 3 (thoracotomy in 2 and thoracoscopy in 1) while the left approach was the primary choice in 4 (thoracotomy in 2 and thoracoscopy in 2). No significant differences were found between the right and left approaches with regard to leaks (P=0.89), strictures (P=1) or mortality (P=1). In 47/54 patients (87%) RAA was noted during right thoracotomy, and primary anastomosis was achieved through the same approach in 29 (61.7%); conversion to other approaches (left thoracotomy or esophageal substitution) was performed in 15 children (38.3%). No significant differences were found between primary left thoracotomy (LT) and LT after RT with regard to leaks (P=0.89), strictures (P=1) or mortality (P=1). Skills and preferences of the surgeon still guide the choice of surgical approach even when preoperatively faced with RAA. A multicenter, prospective randomized study is strongly required. Copyright © 2016 Elsevier Inc. All rights reserved.

Labeling of lectin receptors during the cell cycle.

PubMed

Garrido, J

1976-12-01

Labeling of lectin receptors during the cell cycle. (Localizabión de receptores para lectinas durante el ciclo celular). Arch. Biol. Med. Exper. 10: 100-104, 1976. The topographic distribution of specific cell surface receptors for concanavalin A and wheat germ agglutinin was studied by ultrastructural labeling in the course of the cell cycle. C12TSV5 cells were synchronized by double thymidine block or mechanical selection (shakeoff). They were labeled by means of lectin-peroxidase techniques while in G1 S, G2 and M phases of the cycle. The results obtained were similar for both lectins employed. Interphase cells (G1 S, G2) present a stlihtly discontinous labeling pattern that is similar to the one observed on unsynchronized cells of the same line. Cells in mitosis, on the contrary, present a highly discontinous distribution of reaction product. This pattern disappears after the cells enters G1 and is not present on mitotic cells fixed in aldehyde prior to labeling.

Initial arch wires for tooth alignment during orthodontic treatment with fixed appliances.

PubMed

Jian, Fan; Lai, Wenli; Furness, Susan; McIntyre, Grant T; Millett, Declan T; Hickman, Joy; Wang, Yan

2013-04-30

Initial arch wires are the first arch wires to be inserted into the fixed appliance at the beginning of orthodontic treatment and are used mainly for the alignment of teeth by correcting crowding and rotations. With a number of different types of orthodontic arch wires available for initial tooth alignment, it is important to understand which wire is most efficient, as well as which wires cause the least amount of root resorption and pain during the initial aligning stage of treatment. This is an update of the review 'Initial arch wires for alignment of crooked teeth with fixed orthodontic braces' first published in the Cochrane Database of Systematic Reviews 2010, Issue 4. To assess the effects of initial arch wires for alignment of teeth with fixed orthodontic braces in relation to alignment speed, root resorption and pain intensity. We searched the following electronic databases: the Cochrane Oral Health Group's Trials Register (to 2 August 2012), CENTRAL (The Cochrane Library 2012, Issue 7), MEDLINE via OVID (1950 to 2 August 2012) and EMBASE via OVID (1980 to 2 August 2012). We also searched the reference lists of relevant articles. There was no restriction with regard to publication status or language of publication. We contacted all authors of included studies to identify additional studies. We included randomised controlled trials (RCTs) of initial arch wires to align teeth with fixed orthodontic braces. Only studies involving participants with upper and/or lower full arch fixed orthodontic appliances were included. Two review authors were responsible for study selection, validity assessment and data extraction. All disagreements were resolved by discussion amongst the review team. Corresponding authors of included studies were contacted to obtain missing information. Nine RCTs with 571 participants were included in this review. All trials were at high risk of bias and a number of methodological limitations were identified. All trials had at least one potentially confounding factor (such as bracket type, slot size, ligation method, extraction of teeth) which is likely to have influenced the outcome and was not controlled in the trial. None of the trials reported the important adverse outcome of root resorption.Three groups of comparisons were made.(1) Multistrand stainless steel initial arch wires compared to superelastic nickel titanium (NiTi) initial arch wires. There were four trials in this group, with different comparisons and outcomes reported at different times. No meta-analysis was possible. There is insufficient evidence from these trials to determine whether or not there is a difference in either rate of alignment or pain between stainless steel and NiTi initial arch wires.(2) Conventional (stabilised) NiTi initial arch wires compared to superelastic NiTi initial arch wires. There were two trials in this group, one reporting the outcome of alignment over 6 months and the other reporting pain over 1 week. There is insufficient evidence from these trials to determine whether or not there is any difference between conventional (stabilised) and superelastic NiTi initial arch wires with regard to either alignment or pain.(3) Single-strand superelastic NiTi initial arch wires compared to other NiTi (coaxial, copper NiTi (CuNiTi) or thermoelastic) initial arch wires. The three trials in this comparison each compared a different product against single-strand superelastic NiTi. There is very weak unreliable evidence, based on one very small study (n = 24) at high risk of bias, that coaxial superelastic NiTi may produce greater tooth movement over 12 weeks, but no information on associated pain or root resorption. This result should be interpreted with caution until further research evidence is available. There is insufficient evidence to determine whether or not there is a difference between either thermoelastic or CuNiTi and superelastic NiTi initial arch wires. There is no reliable evidence from the trials included in this review that any specific initial arch wire material is better or worse than another with regard to speed of alignment or pain. There is no evidence at all about the effect of initial arch wire materials on the important adverse effect of root resorption. Further well-designed and conducted, adequately-powered, RCTs are required to determine whether the performance of initial arch wire materials as demonstrated in the laboratory, makes a clinically important difference to the alignment of teeth in the initial stage of orthodontic treatment in patients.

49 CFR 230.61 - Arch tubes, water bar tubes, circulators and thermic siphons.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Arch tubes, water bar tubes, circulators and... MAINTENANCE STANDARDS Boilers and Appurtenances Washing Boilers § 230.61 Arch tubes, water bar tubes... water bar tubes shall thoroughly be cleaned mechanically, washed, and inspected. Circulators and thermic...

4. ATTLEBORO VIADUCT SHOWING MILL STREET ARCH AT LEFT, ATTLEBORO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. ATTLEBORO VIADUCT SHOWING MILL STREET ARCH AT LEFT, ATTLEBORO STATION AT LEFT CENTER AND SOUTH MAIN STREET ARCH AT RIGHT. ATTLEBORO, BRISTOL CO., MA. Sec. 4116, MP 197.16. - Northeast Railroad Corridor, Amtrak Route between RI/MA State Line & South Station, Boston, Suffolk County, MA

76 FR 61291 - Approval and Promulgation of Air Quality Implementation Plans; West Virginia; Ohio; Determination...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-04

.... Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103. D. Hand..., U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103..., Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, PA 19103-2023. The telephone number...

11. DETAIL, ARCH BARREL AND RING, FROM SOUTHWEST, SHOWING CUT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. DETAIL, ARCH BARREL AND RING, FROM SOUTHWEST, SHOWING CUT STONE MASONRY RINGSTONE VOUSSOIRS WITH '1902' KEYSTONE, CONCRETE PARAPET, CONCRETE APRON AT BASE OF BRIDGE UNDER ARCH, AND PORTION OF TIMBER GRILLAGE - Boston Street Bridge, Spanning Harris Creek Sewer at Boston Street, Baltimore, Independent City, MD

12. AN IMAGE OF THE ARCH ENTRADOS LOOKING SOUTH FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. AN IMAGE OF THE ARCH ENTRADOS LOOKING SOUTH FROM THE NORTH SIDE OF U.S. 40. THIS DETAIL CLEARLY SHOWS THE FOUR LONGITUDINAL ARCH CASTINGS AND THE GHOSTS OF THE BOARDS USED AS FORMS. - Vandalia Railroad Bridge, Spanning U.S. Route 40, Indianapolis, Marion County, IN

3. DETAIL VIEW OF ONE ARCH SPAN, LOOKING NW ALONG ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. DETAIL VIEW OF ONE ARCH SPAN, LOOKING NW ALONG EAST BANK OF SUSQUEHANNA RIVER. NOTE FLOOD STAGE MARKINGS ON PIER, ALSO LONGITUDINAL CONSTRUCTION JOINT IN ARCH BARREL. - Philadelphia & Reading Railroad, Susquehanna River Bridge, Spanning Susquehanna River, North of I-83 Bridge, Harrisburg, Dauphin County, PA

Effect of heat treatment on stainless steel lingual arch appliances.

PubMed

Nagatani, S S; Fisher, J G; Hondrum, S O

1996-01-01

This study evaluated the effect of heat treatment on 0.036" diameter stainless steel wire. Forty wires were bent into arch forms (20 experimental and 20 control). The arch width changes were measured and the forces generated were determined over an eight week period. Heat treatment resulted in immediate and significant expansion (p < 0.001) followed by stabilization of arch width. The control wires continued to expand throughout the study. The force generated by the control group and experimental group expansion was capable of producing tooth movement.

Arch-Axis Coefficient Optimization of Long-Span Deck-Type Concrete-Filled Steel Tubular Arch Bridge

NASA Astrophysics Data System (ADS)

Liu, Q. J.; Wan, S.; Liu, H. C.

2017-11-01

This paper is based on Nanpuxi super major bridge which is under construction and starts from Wencheng Zhejiang province to Taishun highway. A finite element model of the whole bridge is constructed using Midas Civil finite element software. The most adverse load combination in the specification is taken into consideration to determine the method of calculating the arch-axis coefficient of long-span deck-type concrete-filled steel tubular arch bridge. By doing this, this paper aims at providing references for similar engineering projects.

Anabolic steroid abuse and tooth size-arch dimensions in the rat.

PubMed

Barrett, R L; Harris, E F; Tolley, E A; Nutting, D F

1993-01-01

Anabolic steroids are misused by adolescents and adults to increase muscle mass and improve appearance and athletic performance. Since anabolics strongly enhance protein synthesis, it was speculated that alterations in tooth size and arch length could occur. This study quantified the effects of the anabolic steroid nandrolone phenpropionate on these parameters in a rat model. The steroid significantly increased mandibular arch length. No difference in mesiodistal dimensions of the molars occurred. In consequence, the increased arch dimensions combined with unaltered tooth size may result in dental spacing and/or other malocclusions.

Effective way to reconstruct arch bridges using concrete walls and transverse strands

NASA Astrophysics Data System (ADS)

Klusáček, Ladislav; Pěkník, Robin; Nečas, Radim

2017-09-01

There are more than 500 masonry arch bridges in the Czech Road system and about 2500 in the Czech Railway system. Many of them are cracked in the longitudinal (span) direction. The barrel vaults are separated by the cracks into partial masonry arches without load bearing connection in transverse direction. These constructions are about 150 years old and they are also too narrow for the current road system. This paper presents a strengthening method for masonry arch bridges using transverse post-tensioning. This method is very useful not only for strengthening in the transverse direction, but widening of masonry arches can be taken as secondary effect especially in case of road bridges. Several bridges were successfully repaired with the use of this system which seems to be effective and reliable.

Role of Dlx6 in regulation of an endothelin-1-dependent, dHAND branchial arch enhancer

PubMed Central

Charité, Jeroen; McFadden, David G.; Merlo, Giorgio; Levi, Giovanni; Clouthier, David E.; Yanagisawa, Masashi; Richardson, James A.; Olson, Eric N.

2001-01-01

Neural crest cells play a key role in craniofacial development. The endothelin family of secreted polypeptides regulates development of several neural crest sublineages, including the branchial arch neural crest. The basic helix–loop–helix transcription factor dHAND is also required for craniofacial development, and in endothelin-1 (ET-1) mutant embryos, dHAND expression in the branchial arches is down-regulated, implicating it as a transcriptional effector of ET-1 action. To determine the mechanism that links ET-1 signaling to dHAND transcription, we analyzed the dHAND gene for cis-regulatory elements that control transcription in the branchial arches. We describe an evolutionarily conserved dHAND enhancer that requires ET-1 signaling for activity. This enhancer contains four homeodomain binding sites that are required for branchial arch expression. By comparing protein binding to these sites in branchial arch extracts from endothelin receptor A (EdnrA) mutant and wild-type mouse embryos, we identified Dlx6, a member of the Distal-less family of homeodomain proteins, as an ET-1-dependent binding factor. Consistent with this conclusion, Dlx6 was down-regulated in branchial arches from EdnrA mutant mice. These results suggest that Dlx6 acts as an intermediary between ET-1 signaling and dHAND transcription during craniofacial morphogenesis. PMID:11711438

[Effect of dental arch length decrease during orthodontic treatment in the upper airway development. A review].

PubMed

Haddad, Stéphanie; Kerbrat, Jean-Baptiste; Schouman, Thomas; Goudot, Patrick

2017-03-01

A possible relation between an upper airway space decrease and the development of obstructive sleep apnea syndrom explains the importance to know the effect of the modification of dental arch length on the upper airway during orthodontic treatment. The aim of this article is to expose recent knowledge about upper airway development and dental arch length decrease factors, to determine the influence of this decrease on upper airway development. A review was done to determine the upper airway normal development, to define dental arch to specify if an ideal position of dental arch on apical base exists. All of the length dental arch decrease factors during orthodontic treatment (dental extraction, dental agenesis and dental malpositions) and their upper airway resounding were searched. Some authors found a diminution of upper airway space after premolars extractions while others didn't found this diminution after extractions premolars when incisor retraction is finished. A decrease of transversal maxillary diameter and nasal cavity may be due to absence of permanent teeth. The effect of dental arch length decrease during orthodontic treatment in the upper airway development was not scientifically proved. However we had to be vigilant and adapt our orthodontic treatment case by case to avoid an upper airway modification. © EDP Sciences, SFODF, 2017.

Biomechanical and clinical factors related to stage I posterior tibial tendon dysfunction.

PubMed

Rabbito, Melissa; Pohl, Michael B; Humble, Neil; Ferber, Reed

2011-10-01

Case control. To investigate differences in arch height, ankle muscle strength, and biomechanical factors in individuals with stage I posterior tibial tendon dysfunction (PTTD) in comparison to healthy individuals. PTTD is a progressive condition, so early recognition and treatment are essential to help delay or reverse the progression. However, no previous studies have investigated stage I PTTD, and no single study has measured static anatomical structure, muscle strength, and gait mechanics in this population. Twelve individuals with stage I PTTD and 12 healthy, age- and gender-matched control subjects, who were engaged in running-related activities, participated in this study. Measurements of arch height index, maximum voluntary ankle invertor muscle strength, and 3-dimensional rearfoot and medial longitudinal arch kinematics during walking were obtained. The runners with PTTD demonstrated significantly lower seated arch height index (P = .02) and greater (P = .03) and prolonged (P = .05) peak rearfoot eversion angle during gait, compared to the healthy runners. No differences were found in standing arch height index values (P = .28), arch rigidity index (P = .06), ankle invertor strength (P = .49), or peak medial longitudinal arch values (P = .49) between groups. The increased foot pronation is hypothesized to place greater strain on the posterior tibialis muscle, which may partially explain the progressive nature of this condition.

What does the transverse carpal ligament contribute to carpal stability?

PubMed

Vanhees, Matthias; Verstreken, Frederik; van Riet, Roger

2015-02-01

Background The transverse carpal ligament is well known for its involvement in carpal tunnel syndrome, and sectioning of this ligament remains the definite treatment for this pathology. Some authors believe that the transverse carpal ligament is an important stabilizer of the carpal arch, whereas others do not consider it to be significant. Several studies have been performed, both in vivo and in in vitro. Sectioning of the transverse carpal ligament does not seem to have any effect on the width of the carpal arch in the unloaded condition. However, patients will load the arch during their activities of daily living. Materials and Methods A cadaveric study was done with distraction of the carpal bones before and after sectioning the transverse carpal ligament. Results With the transverse carpal ligament intact, the carpal arch is mobile, with distraction leading up to 50% widening of the arch. Sectioning of the transverse carpal ligament resulted in a significant widening of the carpal arch by a further 30%. Conclusions Loading of the carpal arch after sectioning of the transeverse carapal ligament leads to a significant increase in intracarpal mobility. This will inevitably influence carpal kinematics in the patient and might be responsible for some complications after simple carpal tunnel releases, such as pillar pain, palmar tenderness, and loss of grip strength.

Analysis of an arched outer-race ball bearing considering centrifugal forces

NASA Technical Reports Server (NTRS)

Hamrock, B. J.; Anderson, W. J.

1972-01-01

A Newton-Raphson method of iteration was used in evaluating the radial and axial projection of the distance between the ball center and the outer raceway groove curvature center (V and W). Fatigue life evaluations were made. The similar analysis of a conventional bearing can be directly obtained from the arched bearing analysis by simply letting the amount of arching be zero (g = 0) and not considering equations related to the unloaded half of the outer race. The analysis was applied to a 150-mm angular contact ball bearing. Results for life, contact loads, and angles are shown for a conventional bearing (g = 0) and two arched bearings (g = 0.127 mm (0.005 in.), and 0.254 mm (0.010 in.)). The results indicate that an arched bearing is highly desirable for high speed applications. In particular, for a DN value of 3 million (20,000 rpm) and an applied axial load of 4448 N (1000 lb), an arched bearing shows an improvement in life of 306 percent over that of a conventional bearing. At 4.2 million DN (28,000 rpm), the corresponding improvement is 340 percent. It was also found for low speeds, the arched bearing does not offer the advantages that it does for high speed applications.

Classification and outcomes of extended arch repair for acute Type A aortic dissection: a systematic review and meta-analysis.

PubMed

Smith, Holly N; Boodhwani, Munir; Ouzounian, Maral; Saczkowski, Richard; Gregory, Alexander J; Herget, Eric J; Appoo, Jehangir J

2017-03-01

Distal extent of repair in patients undergoing surgery for acute Type A aortic dissection (ATAAD) is controversial. Emerging hybrid techniques involving open and endovascular surgery have been reported in small numbers by select individual centres. A systematic review and meta-analysis was performed to investigate the outcomes following extended arch repair for ATAAD. A classification system is proposed of the different techniques to facilitate discussion and further investigation. Using Ovid MEDLINE, 38 studies were identified reporting outcomes for 2140 patients. Studies were categorized into four groups on the basis of extent of surgical aortic resection and the method of descending thoracic aortic stent graft deployment; during circulatory arrest (frozen stented elephant trunk) or with normothermic perfusion and use of fluoroscopy (warm stent graft): (I) surgical total arch replacement, (II) total arch and frozen stented elephant trunk, (III) hemiarch and frozen stented elephant trunk and (IV) total arch and warm stent graft. Perioperative event rates were obtained for each of the four groups and the entire cohort using pooled summary estimates. Linearized rates of late mortality and reoperation were calculated. Overall pooled hospital mortality for extended arch techniques was 8.6% (95% CI 7.2-10.0). Pooled data categorized by surgical technique resulted in hospital mortality of 11.9% for total arch, 8.6% total arch and frozen stented elephant trunk, 6.3% hemiarch and frozen stented elephant trunk and 5.5% total arch and 'warm stent graft'. Overall incidence of stroke for the entire cohort was 5.7% (95% CI 3.6-8.2). Rate of spinal cord ischaemia was 2.0% (95% CI 1.2-3.0). Pooled linearized rate of late mortality was 1.66%/pt-yr (95% CI 1.34-2.07) with linearized rate of re-operation of 1.62%/pt-yr (95% CI 1.24-2.05). Perioperative results of extended arch procedures are encouraging. Further follow-up is required to see if long-term complications are reduced with these emerging techniques. The proposed classification system will facilitate future comparison of short- and long-term results of different techniques of extended arch repair for ATAAD. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Selective cerebro-myocardial perfusion in complex congenital aortic arch pathology: a novel technique.

PubMed

De Rita, Fabrizio; Lucchese, Gianluca; Barozzi, Luca; Menon, Tiziano; Faggian, Giuseppe; Mazzucco, Alessandro; Luciani, Giovanni Battista

2011-11-01

Simultaneous cerebro-myocardial perfusion has been described in neonatal and infant arch surgery, suggesting a reduction in cardiac morbidity. Here reported is a novel technique for selective cerebral perfusion combined with controlled and independent myocardial perfusion during surgery for complex or recurrent aortic arch lesions. From April 2008 to April 2011, 10 patients with arch pathology underwent surgery (two hypoplastic left heart syndrome [HLHS], four recurrent arch obstruction, two aortic arch hypoplasia + ventricular septal defect [VSD], one single ventricle + transposition of the great arteries + arch hypoplasia, one interrupted aortic arch type B + VSD). Median age was 63 days (6 days-36 years) and median weight 4.0 kg (1.6-52). Via midline sternotomy, an arterial cannula (6 or 8 Fr for infants) was directly inserted into the innominate artery or through a polytetrafluoroethylene (PTFE) graft (for neonates <2.0 kg). A cardioplegia delivery system was inserted into the aortic root. Under moderate hypothermia, ascending and descending aorta were cross-clamped, and "beating heart and brain" aortic arch repair was performed. Arch repair was composed of patch augmentation in five, end-to-side anastomosis in three, and replacement in two patients. Average cardiopulmonary bypass time was 163 ± 68 min (71-310). In two patients only (one HLHS, one complex single ventricle), a period of cardiac arrest was required to complete intracardiac repair. In such cases, antegrade blood cardioplegia was delivered directly via the same catheter used for selective myocardial perfusion. Average time of splanchnic ischemia during cerebro-myocardial perfusion was 39 ± 18 min (17-69). Weaning from cardiopulmonary bypass was achieved without inotropic support in three and with low dose in seven patients. One patient required veno-arterial extracorporeal membrane oxygenation. Four patients, body weight <3.0 kg, needed delayed sternal closure. No neurologic dysfunction was noted. Renal function proved satisfactory in all, while liver function was adequate in all but one. The present experience suggests that selective and independent cerebro-myocardial perfusion is feasible in patients with complex or recurrent aortic arch disease, starting from premature newborn less than 2.0 kg of body weight to adults. The technique is as safe as previously reported methods of cerebro-myocardial perfusion and possibly more versatile. © 2011, Copyright the Authors. Artificial Organs © 2011, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

An Assessment of Curve of Spee in Healthy Human Permanent Dentitions: A Cross Sectional Analytical Study in a Group of Young Indian Population.

PubMed

Krishnamurthy, Sushma; Hallikerimath, Rajendra B; Mandroli, Praveenkumar S

2017-01-01

An awareness of the standard value of the maxillary and the mandibular curves of Spee may aid the clinician in developing occlusion in the sagittal plane and would be useful when providing prosthetic rehabilitation for patients with occlusal derangement. To assess and compare the radius and depth of curve of Spee in maxillary and mandibular arches in men and women, in a group of young Indian population. The study cohort consisted of 25 men and 25 women between 19 to 24 years. Impression of maxillary and mandibular arches were made with alginate. Casts were poured in die stone. Standardized digital pictures of the right side of maxillary and mandibular dental casts were made with a digital camera and transferred to a computer. Tips of the distal cusps of molars, premolars and canines of the maxilla and mandible were located. The radius and the depth of the curve of Spee were measured from the digital photographs of dental casts, with the help of 'dimension tool' in the computer software (Corel DRAW X5). Mann-Whitney test was used to analyze the difference in the curve of Spee between men and women and the difference between maxillary and mandibular arches. The mean values were as follows: a) Men: Radii of curve of Spee in the maxillary and mandibular arch were 140.22±65.98 and 109.67±46.80 respectively; depths of curve of Spee in maxillary and mandibular arch were 1.65±0.67 and 1.49±0.74 respectively; b) Women: Radii of curve of Spee in the maxillary and mandibular arch were 120.58±63.91 and 98.31±63.59 respectively; depths of curve of Spee in maxillary and mandibular arch were 1.45±0.54 and 1.40±0.61 respectively. In the mandibular arch, the difference in the radii (p=0.0467) was statistically significant between men and women. In women, the difference in radii (p=0.0467) between maxillary and mandibular arches was statistically significant. The radii and depths of curve of Spee were larger in maxillary than mandibular arches in both men and women. Also, the difference in the radii of mandibular arch was statistically significant between men and women.

No reliable evidence to guide initial arch wire choice for fixed appliance therapy.

PubMed

Flores-Mir, Carlos

2013-12-01

The Cochrane Oral Health Group's Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), Medline and Embase databases were searched. Conference proceedings and abstracts from the British Orthodontic Conference European Orthodontic Conference and the International Association for Dental Research were also searched together with the reference lists of identified studies. Study authors were contacted for additional information. Randomised controlled trials of initial arch wire involving participants with upper and/or lower full arch fixed orthodontic appliances were included. Study selection, data extraction and risk of bias assessment were carried out independently by at least two reviewers. Nine RCTs with 571 participants were included in this review. All trials were at high risk of bias. All trials had at least one potentially confounding factor (such as bracket type, slot size, ligation method, extraction of teeth) which is likely to have influenced the outcome and was not controlled in the trial. None of the trials reported the important adverse outcome of root resorption. The comparisons were made between:Multistrand stainless steel initial arch wires compared to superelastic nickel titanium (NiTi) initial arch wires. There were four trials in this group, with different comparisons and outcomes reported at different times. No meta-analysis was possible. There is insufficient evidence from these trials to determine whether or not there is a difference in either rate of alignment or pain between stainless steel and NiTi initial arch wires.Conventional (stabilised) NiTi initial arch wires compared to superelastic NiTi initial arch wires. There were two trials in this group, one reporting the outcome of alignment over six months and the other reporting pain over one week. There is insufficient evidence from these trials to determine whether or not there is any difference between conventional (stabilised) and superelastic NiTi initial arch wires with regard to either alignment or pain.Single-strand superelastic NiTi initial arch wires compared to other NiTi (coaxial, copper NiTi (CuNiTi) or thermoelastic) initial arch wires. The three trials in this comparison each compared a different product against single-strand superelastic NiTi. There is very weak unreliable evidence, based on one very small study (n = 24) at high risk of bias, that coaxial superelastic NiTi may produce greater tooth movement over 12 weeks, but no information on associated pain or root resorption. This result should be interpreted with caution until further research evidence is available. There is insufficient evidence to determine whether or not there is a difference between either thermoelastic or CuNiTi and superelastic NiTi initial arch wires. There is no reliable evidence from the trials included in this review that any specific initial arch wire material is better or worse than another with regard to speed of alignment or pain. There is no evidence at all about the effect of initial arch wire materials on the important adverse effect of root resorption. Further well-designed and conducted, adequately-powered RCTs are required to determine whether the performance of initial arch wire materials as demonstrated in the laboratory, makes a clinically important difference to the alignment of teeth in the initial stage of orthodontic treatment in patients.

The relationship between foot arch measurements and walking parameters in children.

PubMed

Gill, Simone V; Keimig, Sara; Kelty-Stephen, Damian; Hung, Ya-Ching; DeSilva, Jeremy M

2016-01-23

Walking mechanics are influenced by body morphology. Foot arch height is one aspect of body morphology central to walking. However, generalizations about the relationship between arch height and walking are limited due to previous methodologies used for measuring the arch and the populations that have been studied. To gain the knowledge needed to support healthy gait in children and adults, we need to understand this relationship in unimpaired, typically developing children and adults using dynamic measures. The purpose of the current study was to examine the relationship between arch height and gait in a sample of healthy children and adults using dynamic measures. Data were collected from 638 participants (n = 254 children and n = 384 adults) at the Museum of Science, Boston (MOS) and from 18 4- to 8-year-olds at the Motor Development and Motor Control Laboratories. Digital footprints were used to calculate two arch indices: the Chippaux-Smirak (CSI) and the Keimig Indices (KI). The height of the navicular bone was measured. Gait parameters were captured with a mechanized gait carpet at the MOS and three-dimensional motion analyses and in-ground force plates in the Motor Development and Motor Control Laboratories. Linear regression analyses on data from the MOS confirmed that as age increases, step length increases. With a linear mixed effect regression model, we found that individuals who took longer steps had higher arches as measured by the KI. However, this relationship was no longer significant when only adults were included in the model. A model restricted to children found that amongst this sample, those with higher CSI and higher KI values take longer relative step lengths. Data from the Motor Development and Motor Control Laboratories showed that both CSI and KI added to the prediction; children with lower anterior ground reaction forces had higher CSI and higher KI values. Arch height indices were correlated with navicular height. These results suggest that more than one measure of the arch may be needed elucidate the relationship between arch height and gait.

Aortic arch shape is not associated with hypertensive response to exercise in patients with repaired congenital heart diseases.

PubMed

Ntsinjana, Hopewell N; Biglino, Giovanni; Capelli, Claudio; Tann, Oliver; Giardini, Alessandro; Derrick, Graham; Schievano, Silvia; Taylor, Andrew M

2013-11-12

Aortic arch geometry is linked to abnormal blood pressure (BP) response to maximum exercise. This study aims to quantitatively assess whether aortic arch geometry plays a role in blood pressure (BP) response to exercise. 60 age- and BSA-matched subjects--20 post-aortic coarctation (CoA) repair, 20 transposition of great arteries post arterial switch operation (ASO) and 20 healthy controls--had a three-dimensional (3D), whole heart magnetic resonance angiography (MRA) at 1.5 Tesla, 3D geometric reconstructions created from the MRA. All subjects underwent cardiopulmonary exercise test on the same day as MRA using an ergometer cycle with manual BP measurements. Geometric analysis and their correlation with BP at peak exercise were assessed. Arch curvature was similarly acute in both the post-CoA and ASO cases [0.05 ± 0.01 vs. 0.05 ± 0.01 (1/mm/m²); p = 1.0] and significantly different to that of normal healthy controls [0.05 ± 0.01 vs. 0.03 ± 0.01 (1/mm/m²), p < 0.001]. Indexed transverse arch cross sectional area were significantly abnormal in the post-CoA cases compared to the ASO cases (117.8 ± 47.7 vs. 221.3 ± 44.6; p < 0.001) and controls (117.8 ± 47.7 vs. 157.5 ± 27.2 mm²; p = 0.003). BP response to peak exercise did not correlate with arch curvature (r = 0.203, p = 0.120), but showed inverse correlation with indexed minimum cross sectional area of transverse arch and isthmus (r = -0.364, p = 0.004), and ratios of minimum arch area/ descending diameter (r = -0.491, p < 0.001). Transverse arch and isthmus hypoplasia, rather than acute arch angulation plays a role in the pathophysiology of BP response to peak exercise following CoA repair.

Correlation and agreement of a digital and conventional method to measure arch parameters.

PubMed

Nawi, Nes; Mohamed, Alizae Marny; Marizan Nor, Murshida; Ashar, Nor Atika

2018-01-01

The aim of the present study was to determine the overall reliability and validity of arch parameters measured digitally compared to conventional measurement. A sample of 111 plaster study models of Down syndrome (DS) patients were digitized using a blue light three-dimensional (3D) scanner. Digital and manual measurements of defined parameters were performed using Geomagic analysis software (Geomagic Studio 2014 software, 3D Systems, Rock Hill, SC, USA) on digital models and with a digital calliper (Tuten, Germany) on plaster study models. Both measurements were repeated twice to validate the intraexaminer reliability based on intraclass correlation coefficients (ICCs) using the independent t test and Pearson's correlation, respectively. The Bland-Altman method of analysis was used to evaluate the agreement of the measurement between the digital and plaster models. No statistically significant differences (p > 0.05) were found between the manual and digital methods when measuring the arch width, arch length, and space analysis. In addition, all parameters showed a significant correlation coefficient (r ≥ 0.972; p < 0.01) between all digital and manual measurements. Furthermore, a positive agreement between digital and manual measurements of the arch width (90-96%), arch length and space analysis (95-99%) were also distinguished using the Bland-Altman method. These results demonstrate that 3D blue light scanning and measurement software are able to precisely produce 3D digital model and measure arch width, arch length, and space analysis. The 3D digital model is valid to be used in various clinical applications.

Hybrid endovascular repair in aortic arch pathologies: a retrospective study.

PubMed

Ma, Xiaohui; Guo, Wei; Liu, Xiaoping; Yin, Tai; Jia, Xin; Xiong, Jiang; Zhang, Hongpeng; Wang, Lijun

2010-11-18

The aortic arch presents specific challenges to endovascular repair. Hybrid repair is increasingly evolving as an alternative option for selected patients, and promising initial results have been reported. The aim of this study was to introduce our experiences and evaluate mid-term results of supra aortic transpositions for extended endovascular repair of aortic arch pathologies. From December 2002 to January 2008, 25 patients with thoracic aortic aneurysms and dissections involving the aortic arch were treated with hybrid endovascular treatment in our center. Of the 25 cases, 14 were atherosclerotic thoracic aortic aneurysms and 11 were thoracic aortic dissection. The hybrid repair method included total-arch transpositions (15 cases) or hemi-arch transpositions (10 cases), and endovascular procedures. All hybrid endovascular procedures were completed successfully. Three early residual type-I endoleaks and one type-II endoleak were observed. Stroke occurred in three patients (8%) during the in-hospital stage. The perioperative mortality rate was 4%; one patients died post-operatively from catheter related complications. The average follow-up period was 15 ± 5.8 months (range, 1-41 months). The overall crude survival rate at 15 months was 92% (23/25). During follow-up, new late endoleaks and stent-raft related complications were not observed. One case (4%) developed a unilateral lower limb deficit at 17 days and was readmitted to hospital. In conclusion, the results are encouraging for endovascular aortic arch repair in combination with supra-aortic transposition in high risk cases. Aortic endografting offers good mid-term results. Mid-term results of the hybrid approach in elderly patients with aortic arch pathologies are satisfying.

Distinct patterns of notochord mineralization in zebrafish coincide with the localization of Osteocalcin isoform 1 during early vertebral centra formation

PubMed Central

2012-01-01

Background In chondrichthyans, basal osteichthyans and tetrapods, vertebral bodies have cartilaginous anlagen that subsequently mineralize (chondrichthyans) or ossify (osteichthyans). Chondrocytes that form the vertebral centra derive from somites. In teleost fish, vertebral centrum formation starts in the absence of cartilage, through direct mineralization of the notochord sheath. In a second step, the notochord is surrounded by somite-derived intramembranous bone. In several small teleost species, including zebrafish (Danio rerio), even haemal and neural arches form directly as intramembranous bone and only modified caudalmost arches remain cartilaginous. This study compares initial patterns of mineralization in different regions of the vertebral column in zebrafish. We ask if the absence or presence of cartilaginous arches influences the pattern of notochord sheath mineralization. Results To reveal which cells are involved in mineralization of the notochord sheath we identify proliferating cells, we trace mineralization on the histological level and we analyze cell ultrastructure by TEM. Moreover, we localize proteins and genes that are typically expressed by skeletogenic cells such as Collagen type II, Alkaline phosphatase (ALP) and Osteocalcin (Oc). Mineralization of abdominal and caudal vertebrae starts with a complete ring within the notochord sheath and prior to the formation of the bony arches. In contrast, notochord mineralization of caudal fin centra starts with a broad ventral mineral deposition, associated with the bases of the modified cartilaginous arches. Similar, arch-related, patterns of mineralization occur in teleosts that maintain cartilaginous arches throughout the spine. Throughout the entire vertebral column, we were able to co-localize ALP-positive signal with chordacentrum mineralization sites, as well as Collagen II and Oc protein accumulation in the mineralizing notochord sheath. In the caudal fin region, ALP and Oc signals were clearly produced both by the notochord epithelium and cells outside the notochord, the cartilaginous arches. Based on immunostaining, real time PCR and oc2:gfp transgenic fish, we identify Oc in the mineralizing notochord sheath as osteocalcin isoform 1 (Oc1). Conclusions If notochord mineralization occurs prior to arch formation, mineralization of the notochord sheath is ring-shaped. If notochord mineralization occurs after cartilaginous arch formation, mineralization of the notochord sheath starts at the insertion point of the arches, with a basiventral origin. The presence of ALP and Oc1, not only in cells outside the notochord, but also in the notochord epithelium, suggests an active role of the notochord in the mineralization process. The same may apply to Col II-positive chondrocytes of the caudalmost haemal arches that show ALP activity and Oc1 accumulation, since these chondrocytes do not mineralize their own cartilage matrix. Even without cartilaginous preformed vertebral centra, the cartilaginous arches may have an inductive role in vertebral centrum formation, possibly contributing to the distinct mineralization patterns of zebrafish vertebral column and caudal fin vertebral fusion. PMID:23043290

Distinct patterns of notochord mineralization in zebrafish coincide with the localization of Osteocalcin isoform 1 during early vertebral centra formation.

PubMed

Bensimon-Brito, Anabela; Cardeira, João; Cancela, Maria Leonor; Huysseune, Ann; Witten, Paul Eckhard

2012-10-09

In chondrichthyans, basal osteichthyans and tetrapods, vertebral bodies have cartilaginous anlagen that subsequently mineralize (chondrichthyans) or ossify (osteichthyans). Chondrocytes that form the vertebral centra derive from somites. In teleost fish, vertebral centrum formation starts in the absence of cartilage, through direct mineralization of the notochord sheath. In a second step, the notochord is surrounded by somite-derived intramembranous bone. In several small teleost species, including zebrafish (Danio rerio), even haemal and neural arches form directly as intramembranous bone and only modified caudalmost arches remain cartilaginous. This study compares initial patterns of mineralization in different regions of the vertebral column in zebrafish. We ask if the absence or presence of cartilaginous arches influences the pattern of notochord sheath mineralization. To reveal which cells are involved in mineralization of the notochord sheath we identify proliferating cells, we trace mineralization on the histological level and we analyze cell ultrastructure by TEM. Moreover, we localize proteins and genes that are typically expressed by skeletogenic cells such as Collagen type II, Alkaline phosphatase (ALP) and Osteocalcin (Oc). Mineralization of abdominal and caudal vertebrae starts with a complete ring within the notochord sheath and prior to the formation of the bony arches. In contrast, notochord mineralization of caudal fin centra starts with a broad ventral mineral deposition, associated with the bases of the modified cartilaginous arches. Similar, arch-related, patterns of mineralization occur in teleosts that maintain cartilaginous arches throughout the spine.Throughout the entire vertebral column, we were able to co-localize ALP-positive signal with chordacentrum mineralization sites, as well as Collagen II and Oc protein accumulation in the mineralizing notochord sheath. In the caudal fin region, ALP and Oc signals were clearly produced both by the notochord epithelium and cells outside the notochord, the cartilaginous arches. Based on immunostaining, real time PCR and oc2:gfp transgenic fish, we identify Oc in the mineralizing notochord sheath as osteocalcin isoform 1 (Oc1). If notochord mineralization occurs prior to arch formation, mineralization of the notochord sheath is ring-shaped. If notochord mineralization occurs after cartilaginous arch formation, mineralization of the notochord sheath starts at the insertion point of the arches, with a basiventral origin. The presence of ALP and Oc1, not only in cells outside the notochord, but also in the notochord epithelium, suggests an active role of the notochord in the mineralization process. The same may apply to Col II-positive chondrocytes of the caudalmost haemal arches that show ALP activity and Oc1 accumulation, since these chondrocytes do not mineralize their own cartilage matrix. Even without cartilaginous preformed vertebral centra, the cartilaginous arches may have an inductive role in vertebral centrum formation, possibly contributing to the distinct mineralization patterns of zebrafish vertebral column and caudal fin vertebral fusion.

Maxillary dental arch dimensions in 6-year-old children with articulatory speech disorders.

PubMed

Heliövaara, Arja

2011-01-01

To evaluate maxillary dental arch dimensions in 6-year-old children with articulatory speech disorders and to compare their dental arch dimensions with age- and sex-matched controls without speech disorders. Fifty-two children (15 girls) with errors in the articulation of the sounds /r/, /s/ or /l/ were compared retrospectively with age- and sex-matched controls from dental casts taken at a mean age of 6.4 years (range 5.0-8.4). All children with articulatory speech disorders had been referred to City of Helsinki Health Care, Dental Care Department by a phoniatrician or a speech therapist in order to get oral-motor activators (removable palatal plates) to be used in their speech therapy. A χ2-test and paired Student's t tests were used in the statistical analyses. The children with articulatory speech disorders had similar maxillary dental arch widths but smaller maxillary dental arch length than the controls. This small series suggests that 6-year-old children with articulatory speech disorders may have decreased maxillary dental arch length. Copyright © 2011 S. Karger AG, Basel.

Regional cerebral perfusion for surgical correction of neonatal aortic arch obstruction.

PubMed

Zhang, Hui; Cheng, Pei; Hou, Jia; Li, Lei; Liu, Hu; Liu, Ruifang; Ji, Bingyang; Luo, Yi

2009-05-01

One-stage repair of aortic arch obstruction and associated cardiac anomalies is a surgical challenge in infants.The purpose of the present study is to review the current outcome using regional cerebral perfusion (RCP) during a procedure correcting interrupted aortic arch (IAA) and also isolated aortic coarctation (CoA) and CoA combined with hypoplastic aortic arch (CoA-HyAA) in our center. Between January 2007 and July 2008, 24 infant patients with interrupted aortic arch (IAA) (n=3), isolated aortic coarctation (iCoA) (n=9) and aortic coarctation with hypoplastic aortic arch (CoA-HyAA) (n=12) underwent one-stage surgical correction in our hospital. End-to-end anastomosis was employed in 12 infants (IAA n=3 and iCoA n=9); for the other 12 patients with CoA-HyAA, an end-to-end extended anastomosis was used in 8 cases, end-to-side anastomosis in 2 cases, and composite heterologous pericardial patch in 2 cases. RCP with 40 mL/kg/min through the innominate artery during aortic arch reconstruction was employed for all pediatric patients. One single-dose histidine-ketoglutarate-tryptophan (HTK) solution was used for myocardial protection during CPB. Cardiopulmonary bypass time and aortic cross-clamp time were 165.6+/-32.4 min and 81.7+/-30.0 min, respectively. The mean regional cerebral perfusion time was 31.0+/-10.6 min; lowest nasopharyngeal temperature was 19.1+/-1.1 degrees C. Operative mortality rate in both groups was 8.3%. Mean follow-up was 10.5+/-4.8 months. There was no late mortality or postoperative neurologic, renal or hepatic complications. All patients are asymptomatic and are developing normally. One-stage total arch repair using the RCP technique is an excellent method that may minimize neurologic and renal complications. Our surgical strategy for arch anomaly has a low rate of residual and recurrent coarctation when performed in these infants.

NASA ARCH- A FILE ARCHIVAL SYSTEM FOR THE DEC VAX

NASA Technical Reports Server (NTRS)

Scott, P. J.

1994-01-01

The function of the NASA ARCH system is to provide a permanent storage area for files that are infrequently accessed. The NASA ARCH routines were designed to provide a simple mechanism by which users can easily store and retrieve files. The user treats NASA ARCH as the interface to a black box where files are stored. There are only five NASA ARCH user commands, even though NASA ARCH employs standard VMS directives and the VAX BACKUP utility. Special care is taken to provide the security needed to insure file integrity over a period of years. The archived files may exist in any of three storage areas: a temporary buffer, the main buffer, and a magnetic tape library. When the main buffer fills up, it is transferred to permanent magnetic tape storage and deleted from disk. Files may be restored from any of the three storage areas. A single file, multiple files, or entire directories can be stored and retrieved. archived entities hold the same name, extension, version number, and VMS file protection scheme as they had in the user's account prior to archival. NASA ARCH is capable of handling up to 7 directory levels. Wildcards are supported. User commands include TEMPCOPY, DISKCOPY, DELETE, RESTORE, and DIRECTORY. The DIRECTORY command searches a directory of savesets covering all three archival areas, listing matches according to area, date, filename, or other criteria supplied by the user. The system manager commands include 1) ARCHIVE- to transfer the main buffer to duplicate magnetic tapes, 2) REPORTto determine when the main buffer is full enough to archive, 3) INCREMENT- to back up the partially filled main buffer, and 4) FULLBACKUP- to back up the entire main buffer. On-line help files are provided for all NASA ARCH commands. NASA ARCH is written in DEC VAX DCL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.X. This program was developed in 1985.

Aortic Arch Morphology and Aortic Length in Patients with Dissection, Traumatic, and Aneurysmal Disease.

PubMed

Alberta, H B; Takayama, T; Smits, T C; Wendorff, B B; Cambria, R P; Farber, M A; Jordan, W D; Patel, V; Azizzadeh, A; Rovin, J D; Matsumura, J S

2015-12-01

To assess aortic arch morphology and aortic length in patients with dissection, traumatic injury, and aneurysm undergoing TEVAR, and to identify characteristics specific to different pathologies. This was a retrospective analysis of the aortic arch morphology and aortic length of dissection, traumatic injury, and aneurysmal patients. Computed tomography imaging was evaluated of 210 patients (49 dissection, 99 traumatic injury, 62 aneurysm) enrolled in three trials that received the conformable GORE TAG thoracic endoprosthesis. The mean age of trauma patients was 43 ± 19.6 years, 57 ± 11.7 years for dissection and 72 ± 9.6 years for aneurysm patients. A standardized protocol was used to measure aortic arch diameter, length, and take-off angle and clockface orientation of branch vessels. Differences in arch anatomy and length were assessed using ANOVA and independent t tests. Of the 210 arches evaluated, 22% had arch vessel common trunk configurations. The aortic diameter and the distance from the left main coronary (LMC) to the left common carotid (LCC) were greater in dissection patients than in trauma or aneurysm patients (p < .001). Aortic diameter in aneurysm patients was greater compared with trauma patients (p < .05). The distances from the branch vessels to the celiac artery (CA) were greater in dissection and aneurysm patients than in trauma patients (p < .001). The take-off angle of the innominate (I), LCCA, and left subclavian (LS) were greater, between 19% and 36%, in trauma patients than in dissection and aneurysm patients (p < .001). Clockface orientation of the arch vessels varies between pathologies. Arch anatomy has significant morphologic differences when comparing aortic pathologies. Describing these differences in a large sample of patients is beneficial for device designs and patient selection. Copyright © 2015 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Brain protection in aortic arch aneurysm: antegrade or retrograde?

PubMed

Harky, Amer; Fok, Matthew; Bashir, Mohamad; Estrera, Anthony L

2018-01-03

During open aortic arch repair, there is an interruption of cerebral perfusion and to prevent neurological sequelae, the hypothermic circulatory arrest has been established to provide sufficient brain protection coupled with adjuncts including retrograde and antegrade cerebral perfusion. To date, brain protection during open aortic arch repair is a contested topic as to which provides superior brain protection with little evidence existing to suggest supremacy of one modality over the other. This article reviews current literature reflecting on key and emerging studies in brain protection and their associated outcomes in patients undergoing open aortic arch surgery.

Mechanical cause for acute left lung atelectasis after neonatal aortic arch repair with arterial switch operation: Conservative management.

PubMed

Maddali, Madan Mohan; Kandachar, Pranav Subbaraya; Al-Hanshi, Said; Al Ghafri, Mohammed; Valliattu, John

2017-01-01

Respiratory complications due to mechanical obstruction of the airways can occur following pediatric cardiac surgery. Clinically significant intrathoracic vascular compression of the airway can occur when extensive dissection and mobilization of arch and neck vessels is involved as in repair of interrupted aortic arch. This case report describes a neonate who underwent interrupted aortic arch repair along with an arterial switch operation and developed a left lung collapse immediately after tracheal extubation. Fiber-optic bronchoscopy revealed vascular compression as the real culprit. The child was successfully managed conservatively.

Advantages of a Beveled Osteotomy on the Zygomatic Arch During Reduction Malarplasty.

PubMed

Lee, Tae Sung; Park, Sanghoon

2017-10-01

During a conventional reduction malarplasty procedure, a dual approach including intraoral incisions and preauricular incisions is made to reduce both the zygomatic body and arch. As the preauricular approach is performed to cut the zygomatic arch, there are several remarkable advantages that can be achieved by simply beveling the osteotomy anteriorly on the zygomatic arch. This has the benefits of enhancing bone union by the increase in cross-sectional area for bone contact, decreasing palpability on the osteotomy site, placing the osteotomy more posteriorly, preventing depression in the anterior malar region, and reducing the need for metal fixtures.

Arched-outer-race ball-bearing analysis considering centrifugal forces

NASA Technical Reports Server (NTRS)

Hamrock, B. J.; Anderson, W. J.

1972-01-01

A first-order thrust load analysis that considers centrifugal forces but which neglects gyroscopics, elastohydrodynamics, and thermal effects was performed. The analysis was applied to a 150-mm-bore angular-contact ball bearing. Fatigue life, contact loads, and contact angles are shown for conventional and arched bearings. The results indicate that an arched bearing is highly desirable for high-speed applications. In particular, at an applied load of 4448 n (1000 lb) and a DN value of 3 million (20,000 rpm) the arched bearing shows an improvement in life of 306 percent over that of a conventional bearing.

Developmental and evolutionary significance of the mandibular arch and prechordal/premandibular cranium in vertebrates: revising the heterotopy scenario of gnathostome jaw evolution

PubMed Central

Kuratani, Shigeru; Adachi, Noritaka; Wada, Naoyuki; Oisi, Yasuhiro; Sugahara, Fumiaki

2013-01-01

The cephalic neural crest produces streams of migrating cells that populate pharyngeal arches and a more rostral, premandibular domain, to give rise to an extensive ectomesenchyme in the embryonic vertebrate head. The crest cells forming the trigeminal stream are the major source of the craniofacial skeleton; however, there is no clear distinction between the mandibular arch and the premandibular domain in this ectomesenchyme. The question regarding the evolution of the gnathostome jaw is, in part, a question about the differentiation of the mandibular arch, the rostralmost component of the pharynx, and in part a question about the developmental fate of the premandibular domain. We address the developmental definition of the mandibular arch in connection with the developmental origin of the trabeculae, paired cartilaginous elements generally believed to develop in the premandibular domain, and also of enigmatic cartilaginous elements called polar cartilages. Based on comparative embryology, we propose that the mandibular arch ectomesenchyme in gnathostomes can be defined as a Dlx1-positive domain, and that the polar cartilages, which develop from the Dlx1-negative premandibular ectomesenchyme, would represent merely posterior parts of the trabeculae. We also show, in the lamprey embryo, early migration of mandibular arch mesenchyme into the premandibular domain, and propose an updated version of the heterotopy theory on the origin of the jaw. PMID:22500853

Stratigraphic variations in the Carboniferous section across the Arkansas-Oklahoma State Line Arch

NASA Astrophysics Data System (ADS)

Engelhardt, Tyler D.

The State Line Arch is represented by a structural high that trends through the study area in a loose alignment with the Arkansas-Oklahoma state line. Evidence of the arch extending further to the north includes a structural high and stratigraphic variation at an outcrop on Highway 59 near Evansville Mountain in Crawford County, Arkansas. The exact timing of the formation of the arch remains undetermined, but upper Devonian thinning at the top of the arch indicates the structure is pre-Mississippian. The reason for the development of the arch is poorly understood, but evidence linking Mississippian-aged Waulsortian mounds to Precambrian Spavinaw granite structures of northeastern Oklahoma and southwestern Missouri suggests Precambrian basement structures may extend into the study area. The structural nature of the arch provided an environment favorable to carbonate build-up during deposition of the Mississippian interval. A previously unidentified limestone unit measuring 175 feet thick likely represents the transgressive phase of a transgressive-regressive sequence responsible for the deposition of the Mayes Group of northeastern Oklahoma. Growth on the downthrown side of the Muldrow-Mulberry Fault system may indicate earlier movement than previous studies have suggested on the east-west trending normal faults of the Arkoma Basin. A possible roll-over anticline structure may exist to the south of the Muldrow-Mulberry fault system.

Angiotensin converting enzyme inhibitors and aortic arch obstructive malformations.

PubMed

Maliheh, Kadivar; Abdorrazagh, Kiani; Armen, Kocharian; Reza, Shabanian

2006-10-01

We describe two newborn infants with aortic arch obstructive malformations who became anuric after initiation of captopril. Since angiotensin converting enzyme inhibitors can alter renal blood flow by reduction in angiotensin II and blocking autoregulation phenomenon, it is important to use them with great caution in neonates with aortic arch obstructive malformations, while monitoring their renal function closely.

Influences on Early and Medium-Term Survival Following Surgical Repair of the Aortic Arch

PubMed Central

Bashir, Mohamad; Field, Mark; Shaw, Matthew; Fok, Matthew; Harrington, Deborah; Kuduvalli, Manoj; Oo, Aung

2014-01-01

Objectives: It is now well established by many groups that surgery on the aortic arch may be achieved with consistently low morbidity and mortality along with relatively good survival compared to estimated natural history for a number of aortic arch pathologies. The objectives of this study were to: 1) report, compare, and analyze our morbidity and mortality outcomes for hemiarch and total aortic arch surgery; 2) examine the survival benefit of hemiarch and total aortic arch surgery compared to age- and sex-matched controls; and 3) define factors which influence survival in these two groups and, in particular, identify those that are modifiable and potentially actionable. Methods: Outcomes from patients undergoing surgical resection of both hemiarch and total aortic arch at the Liverpool Heart and Chest Hospital between June 1999 and December 2012 were examined in a retrospective analysis of data collected for The Society for Cardiothoracic Surgeons (UK). Results: Over the period studied, a total of 1240 patients underwent aortic surgery, from which 287 were identified as having undergone hemi to total aortic arch surgery under deep or moderate hypothermic circulatory arrest. Twenty three percent of patients' surgeries were nonelective. The median age at the time of patients undergoing elective hemiarch was 64.3 years and total arch was 65.3 years (P = 0.25), with 40.1% being female in the entire group. A total of 140 patients underwent elective hemiarch replacement, while 81 underwent elective total arch replacement. Etiology of the aortic pathology was degenerative in 51.2% of the two groups, with 87.1% requiring aortic valve repair in the elective hemiarch group and 64.2% in the elective total arch group (P < 0.001). Elective in-hospital mortality was 2.1% in the hemiarch group and 6.2% (P = 0.15) in the total arch group with corresponding rates of stroke (2.9% versus 4.9%, P = 0.47), renal failure (4.3% versus 6.2%, P = 0.54), reexploration for bleeding (4.3% versus 4.9%, P > 0.99), and prolonged ventilation (8.6% versus 16.1%, P = 0.09). Overall mortality was 20.9% at 5 years, while it was 15.7% in the elective hemiarch and 25.9% in the total arch group (P = 0.065). Process control charts demonstrated stability of annualized mortality outcomes over the study period. Survival curve was flat and parallel compared to age- and sex-matched controls beyond 2 years. Multivariate analysis demonstrated the following independent factors associated with survival: renal dysfunction [hazard ratio (HR) = 3.11; 95% confidence interval (CI) = 1.44-6.73], New York Heart Association (NYHA) class ≥ III (HR = 2.25; 95% CI = 1.38-3.67), circulatory arrest time > 100 minutes (HR = 2.92; 95% CI = 1.57-5.43), peripheral vascular disease (HR = 2.44; 95% CI = 1.25-4.74), and concomitant coronary artery bypass graft operation (HR = 2.14; 95% CI = 1.20-3.80). Conclusions: Morbidity, mortality, and medium-term survival were not statistically different for patients undergoing elective hemi-aortic arch and total aortic arch surgery. The survival curve in this group of patients is flat and parallel to sex- and age-matched controls beyond 2 years. Multivariate analysis identified independent influences on survival as renal dysfunction, NYHA class ≥ III, circulatory arrest time (> 100 min), peripheral vascular disease, and concomitant coronary artery bypass grafting. Focus on preoperative optimization of some of these variables may positively influence long-term survival. PMID:26798716

[Biomechanical testing of the new torque-segmented arch (TSA)].

PubMed

Wichelhaus, A; Sander, F G

1995-07-01

New torque-segmented arch wires are presented which consist of a superelastic anterior component with 30 degrees or 45 degrees torque and which are connected to 2 steel lateral components by means of a crimped connector. When using such torque-segmented arch wires, the crimped connector rests mesially to the canine bracket and the lateral components exhibit a torque of 0 degree. The use of the torque-segmented arch wires requires the practitioner to adjust the anterior tooth segment, to bend in first order bends in the steel lateral portion as well as to bend in a sweep to avoid an anterior tooth extrusion, and, if desired, to bend in third order bends to influence premolars and molars. In some cases the simultaneous application of palatal arches can become necessary, because each torque transfer results in a transversal enlargement in the molar area. Compared to conventional steel wires with dimensions of 0.016 x 0.022 in which an anterior tooth torque is bent, the torque segmented arch wires exhibit considerably fewer side effects, but there is a larger distally rotating moment for the molars. 1. When applying torque-segmented arch wires, the extrusive force transferred to the anterior teeth is considerably smaller. 2. The protrusive force acting on the anterior teeth is also considerably smaller, which results in a reduced demand being placed on the anchorage of the molars. 3. The torque transfer to the incisors rests in a quite moderate range, even in the case of a 50 degrees torque. For this reason, the practitioner can expect diminished or no resorptions at all compared to the aforementioned steel wires. 4. The Martensite plateau of the torque-segmented arch wires exhibit constant moments in large areas so that such arch wires can be used in almost every anterior tooth position. 5. The segmented wires presented here can be applied not only in the case of the standard edgewise technique but also in each case of the straight-wire technique. 6. These new arch wires require no readjustment of torque values. 7. To control the transferred torque values it is recommended that the already transferred torque values be monitored during each check-up with the help of the described torque key. 8. When the torque values of the brackets are known, the torque key renders frequent patient X-rays superfluous. 9. When the desired torque values are attained, treatment can proceed using conventional arch wires.

A comparison of foot kinematics in people with normal- and flat-arched feet using the Oxford Foot Model.

PubMed

Levinger, Pazit; Murley, George S; Barton, Christian J; Cotchett, Matthew P; McSweeney, Simone R; Menz, Hylton B

2010-10-01

Foot posture is thought to influence predisposition to overuse injuries of the lower limb. Although the mechanisms underlying this proposed relationship are unclear, it is thought that altered foot kinematics may play a role. Therefore, this study was designed to investigate differences in foot motion between people with normal- and flat-arched feet using the Oxford Foot Model (OFM). Foot posture in 19 participants was documented as normal-arched (n=10) or flat-arched (n=9) using a foot screening protocol incorporating measurements from weightbearing antero-posterior and lateral foot radiographs. Differences between the groups in triplanar motion of the tibia, rearfoot and forefoot during walking were evaluated using a three-dimensional motion analysis system incorporating a multi-segment foot model (OFM). Participants with flat-arched feet demonstrated greater peak forefoot plantar-flexion (-13.7° ± 5.6° vs -6.5° ± 3.7°; p=0.004), forefoot abduction (-12.9° ± 6.9° vs -1.8° ± 6.3°; p=0.002), and rearfoot internal rotation (10.6° ± 7.5° vs -0.2°± 9.9°; p=0.018) compared to those with normal-arched feet. Additionally, participants with flat-arched feet demonstrated decreased peak forefoot adduction (-7.0° ± 9.2° vs 5.6° ± 7.3°; p=0.004) and a trend towards increased rearfoot eversion (-5.8° ± 4.4° vs -2.5° ± 2.6°; p=0.06). These findings support the notion that flat-arched feet have altered motion associated with greater pronation during gait; factors that may increase the risk of overuse injury. Copyright © 2010 Elsevier B.V. All rights reserved.

Contemporary results of open aortic arch surgery.

PubMed

Thomas, Mathew; Li, Zhuo; Cook, David J; Greason, Kevin L; Sundt, Thoralf M

2012-10-01

The success of endovascular therapies for descending thoracic aortic disease has turned attention toward stent graft options for repair of aortic arch aneurysms. Defining the role of such techniques demands understanding of contemporary results of open surgery. The outcomes of open arch procedures performed on a single surgical service from July 1, 2001 to August 30, 2010, were examined as defined per The Society of Thoracic Surgeons national database. During the study period, 209 patients (median age, 65 years; range, 26-88) underwent arch operations, of which 159 were elective procedures. In 65 the entire arch was replaced, 22 of whom had portions of the descending thoracic aorta simultaneously replaced via bilateral thoracosternotomy. Antegrade cerebral perfusion was used in 78 patients and retrograde cerebral perfusion in 1. Operative mortality was 2.5% in elective circumstances and 10% in emergency cases (P = .04). The stroke rate was 5.0% when procedures were performed electively and 11.8% when on an emergency basis (P = .11). Procedure-specific mortality rates were 5.5% for elective and 10% for emergency procedures with total arch replacement, and 1.0% for elective and 10% for emergency procedures with hemiarch replacement. Stratified by extent, neurologic event rates were 5.5% for elective and 10% for emergency procedures with total arch and 4.8% for elective and 12.5% for emergency procedures with hemiarch replacement. Open aortic arch replacement can be performed with low operative mortality and stroke rates, especially in elective circumstances, by a team with particular focus on the procedure. The results of novel endovascular therapies should be benchmarked against contemporary open series performed in such a setting. Copyright © 2012 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

The effect of arch height on kinematic coupling during walking.

PubMed

Wilken, Jason; Rao, Smita; Saltzman, Charles; Yack, H John

2011-03-01

The purpose of the current study was to assess kinematic coupling within the foot in individuals across a range of arch heights. Seventeen subjects participated in this study. Weight-bearing lateral radiographs were used to measure the arch height, defined as angle between the 1st metatarsal and the calcaneus. A kinematic model including the 1st metatarsal, lateral forefoot, calcaneus and tibia was used to assess foot kinematics during walking. Four coupling ratios were calculated: calcaneus frontal to forefoot transverse plane motion (Calcaneal EV/Forefoot AB), calcaneus frontal to transverse plane motion (Calcaneus EV/AB), forefoot sagittal to transverse plane motion (Forefoot DF/AB), and 1st metatarsal sagittal to transverse plane motion (1st Metatarsal DF/AB). Pearson product moment correlations were used to assess the relationship between arch height and coupling ratios. Mean (SD) radiographic arch angles of 129.8 (12.1) degrees with a range from 114 to 153 were noted, underscoring the range of arch heights in this cohort. Arch height explained approximately 3%, 38%, 12% and 1% of the variance in Calcaneal EV/Forefoot AB, Calcaneus EV/AB, Forefoot DF/AB and 1st Metatarsal DF/AB respectively. Calcaneal EV/Forefoot AB, Calcaneus EV/AB, Forefoot DF/AB and 1st Metatarsal DF/AB coupling ratios of 1.84 ± 0.80, 0.56 ± 0.35, 0.96 ± 0.27 and 0.43 ± 0.21 were noted, consistent with the twisted foot plate model, windlass mechanism and midtarsal locking mechanisms. Arch height had a small and modest relationship with kinematic coupling ratios during walking. Copyright © 2010 Elsevier Ltd. All rights reserved.

Impact of Retrograde Arch Extension in Acute Type B Aortic Dissection on Management and Outcomes.

PubMed

Nauta, Foeke J H; Tolenaar, Jip L; Patel, Himanshu J; Appoo, Jehangir J; Tsai, Thomas T; Desai, Nimesh D; Montgomery, Daniel G; Mussa, Firas F; Upchurch, Gilbert R; Fattori, Rosella; Hughes, G Chad; Nienaber, Christoph A; Isselbacher, Eric M; Eagle, Kim A; Trimarchi, Santi

2016-12-01

Optimal management of acute type B aortic dissection with retrograde arch extension is controversial. The effect of retrograde arch extension on operative and long-term mortality has not been studied and is not incorporated into clinical treatment pathways. The International Registry of Acute Aortic Dissection was queried for all patients presenting with acute type B dissection and an identifiable primary intimal tear. Outcomes were stratified according to management for patients with and without retrograde arch extension. Kaplan-Meier survival curves were constructed. Between 1996 and 2014, 404 patients (mean age, 63.3 ± 13.9 years) were identified. Retrograde arch extension existed in 67 patients (16.5%). No difference in complicated presentation was noted (36.8% vs 31.7%, p = 0.46), as defined by limb or organ malperfusion, coma, rupture, and shock. Patients with or without retrograde arch extension received similar treatment, with medical management in 53.7% vs 56.5% (p = 0.68), endovascular treatment in 32.8% vs 31.1% (p = 0.78), open operation in 11.9% vs 9.5% (p = 0.54), or hybrid approach in 1.5% vs 3.0% (p = 0.70), respectively. The in-hospital mortality rate was similar for patients with (10.7%) and without (10.4%) retrograde arch extension (p = 0.96), and 5-year survival was also similar at 78.3% and 77.8%, respectively (p = 0.27). The incidence of retrograde arch dissection involves approximately 16% of patients with acute type B dissection. In the International Registry of Acute Aortic Dissection, this entity seems not to affect management strategy or early and late death. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Dynamic effect of the tibialis posterior muscle on the arch of the foot during cyclic axial loading.

PubMed

Kamiya, Tomoaki; Uchiyama, Eiichi; Watanabe, Kota; Suzuki, Daisuke; Fujimiya, Mineko; Yamashita, Toshihiko

2012-11-01

The most common cause of acquired flatfoot deformity is tibialis posterior tendon dysfunction. The present study compared the change in medial longitudinal arch height during cyclic axial loading with and without activated tibialis posterior tendon force. Fourteen normal, fresh frozen cadaveric legs were used. A total of 10,000 cyclic axial loadings of 500 N were applied to the longitudinal axis of the tibia. The 32-N tibialis posterior tendon forces were applied to the specimens of the active group (n=7). Specimens of another group (non-active group, n=7) were investigated without the tibialis posterior tendon force. The bony arch index was calculated from the displacement of the navicular height. The mean initial bony arch indexes with maximal weightbearing were 0.239 (SD 0.009) in active group and 0.239 (SD 0.014) in non-active group. After 7000 cycles, the bony arch indexes with maximal weightbearing were significantly greater in the active group (mean 0.214, SD 0.013) than in the non-active group (mean 0.199, SD 0.013). The mean bony arch indexes with maximal weightbearing after 10,000 cycles were 0.212 (SD 0.011) in the active group and 0.196 (SD 0.015) in the non-active group. The passive supportive structures were inadequate, and the tibialis posterior muscle was essential to maintain the medial longitudinal arch of the foot in the dynamic weightbearing condition. The findings underscore that physical therapy and arch supportive equipments are important to prevent flatfoot deformity in the condition of weakness or dysfunction of the tibialis posterior muscle. Copyright © 2012 Elsevier Ltd. All rights reserved.

Pathogenesis of solitary right aortic arch: a mass effect hypothesis based on observations of serial human embryonic sections.

PubMed

Jin, Zhe W; Yamada, Tomonori; Kim, Ji H; Rodríguez-Vázquez, José F; Murakami, Gen; Arakawa, Keiji

2017-03-01

In general, solitary right aortic arch carries the left-sided ductus arteriosus communicating between the left subclavian and pulmonary arteries or the right-sided ductus connecting the descending aorta to the left pulmonary artery. Serial sections of fifteen 5- to 6-week-old embryos and ten 8- to 9-week-old fetuses suggested that the pathogenesis was unrelated to inversion due to dysfunction in gene cascades that control the systemic left/right axis. With inversion, conversely, the ductus or the sixth pharyngeal arch artery should connect to the right pulmonary artery. The disappearance of the right aortic arch started before the caudal migration of the aortic attachment of the ductus. Sympathetic nerve ganglia developed immediately posterior to both aortae, with a single embryonic specimen showing a large ganglion at the midline close to the union of the aortic arches. These ganglia may interfere with blood flow through the distal left arch, resulting in the ductus ending at the descending aorta behind the oesophagus. In another fetus examined, a midline shift of the ductus course resulted in the trachea curving posteriorly. Therefore, solitary right arch is likely to accompany abnormalities of the surrounding structures. The timing and site of the obstruction should be different between types: an almost midline obstruction near the aortic union needed for the development of the left-sided ductus and a distal obstruction near the left subclavian arterial origin needed for the development of the right-sided ductus. A mass effect of the sympathetic ganglia may explain the pathogenesis of any type of anomalous ductus arteriosus shown in previous reports of the solitary right arch.

Simple retrograde cerebral perfusion is as good as complex antegrade cerebral perfusion for hemiarch replacement.

PubMed

Tanaka, Akiko; Estrera, Anthony L

2018-01-01

Cerebral complication is a major concern after aortic arch surgery, which may lead to death. Thus, cerebral protection strategy plays the key role to obtain respectable results in aortic arch repair. Deep hypothermic circulatory arrest was introduced in 1970s to decrease the ischemic insults to the brain. However, safe duration of circulatory arrest time was limited to 30 minutes. The 1990s was the decade of evolution for cerebral protection, in which two adjuncts for deep hypothermic circulatory arrest were introduced: retrograde and antegrade cerebral perfusion (ACP) techniques. These two cerebral perfusion techniques significantly decreased incidence of postoperative neurological dysfunction and mortality after aortic arch surgery. Although there are no large prospective studies that demonstrate which perfusion technique provide better outcomes, multiple retrospective studies implicate that ACP may decrease cerebral complications compared to retrograde cerebral perfusion (RCP) when a long circulatory arrest time is required during aortic arch reconstructions. To date, many surgeons favor ACP over RCP during a complex aortic arch repair, such as total arch replacement and hybrid arch replacement. However, the question is whether the use of ACP is necessary during a short, limited circulatory arrest time, such as hemiarch replacement? There is a paucity of data that proves the advantages of a complex ACP over a simple RCP for a short circulatory arrest time. RCP with deep hypothermic circulatory arrest is the simple, efficient cerebral protection technique with minimal interference to the surgical field-and it potentially allows to flush atheromatous debris out from the arch vessels. Thus, it is the preferred adjunct to deep hypothermic circulatory arrest during hemiarch replacement in our institution.

Simple retrograde cerebral perfusion is as good as complex antegrade cerebral perfusion for hemiarch replacement

PubMed Central

Tanaka, Akiko

2018-01-01

Cerebral complication is a major concern after aortic arch surgery, which may lead to death. Thus, cerebral protection strategy plays the key role to obtain respectable results in aortic arch repair. Deep hypothermic circulatory arrest was introduced in 1970s to decrease the ischemic insults to the brain. However, safe duration of circulatory arrest time was limited to 30 minutes. The 1990s was the decade of evolution for cerebral protection, in which two adjuncts for deep hypothermic circulatory arrest were introduced: retrograde and antegrade cerebral perfusion (ACP) techniques. These two cerebral perfusion techniques significantly decreased incidence of postoperative neurological dysfunction and mortality after aortic arch surgery. Although there are no large prospective studies that demonstrate which perfusion technique provide better outcomes, multiple retrospective studies implicate that ACP may decrease cerebral complications compared to retrograde cerebral perfusion (RCP) when a long circulatory arrest time is required during aortic arch reconstructions. To date, many surgeons favor ACP over RCP during a complex aortic arch repair, such as total arch replacement and hybrid arch replacement. However, the question is whether the use of ACP is necessary during a short, limited circulatory arrest time, such as hemiarch replacement? There is a paucity of data that proves the advantages of a complex ACP over a simple RCP for a short circulatory arrest time. RCP with deep hypothermic circulatory arrest is the simple, efficient cerebral protection technique with minimal interference to the surgical field—and it potentially allows to flush atheromatous debris out from the arch vessels. Thus, it is the preferred adjunct to deep hypothermic circulatory arrest during hemiarch replacement in our institution. PMID:29682460

Analysis of the dentoalveolar effects of slow and rapid maxillary expansion in complete bilateral cleft lip and palate patients: a randomized clinical trial.

PubMed

de Medeiros Alves, Arthur César; Garib, Daniela Gamba; Janson, Guilherme; de Almeida, Araci Malagodi; Calil, Louise Resti

2016-09-01

The purpose of this study was to compare the dentoalveolar effects of slow (SME) and rapid (RME) maxillary expansions in patients with complete bilateral cleft lip and palate (BCLP). A sample of 50 patients with BCLP and maxillary arch constriction was randomly and equally allocated into two groups. Group SME comprised patients (mean age of 8.8 years) treated with quad-helix appliance. Group RME comprised individuals (mean age of 8.9 years) treated with Hyrax expander. Digital dental models obtained immediately pre-expansion (T1) and 6 months after the active expansion period (T2) were used for measuring maxillary dental arch widths, arch perimeter, arch length, palatal depth, buccolingual inclination of posterior teeth and differential amount of expansion accomplished at the canine and molar regions. Inter-phase and intergroup comparisons were performed using paired t tests and t tests, respectively (p < 0.05). SME and RME caused significant increase of arch widths and arch perimeter. Arch length and palatal depth decreased nonsignificantly with SME but significantly with RME. Buccal tooth inclination was significant only for maxillary deciduous canines in both groups. The quad-helix appliance showed a significant differential expansion between anterior and posterior regions. No differences were observed between SME and RME for all variables. Differences were not found between the dentoalveolar effects of SME and RME in patients with BCLP. SME demanded a greater therapy time compared to RME. Both expansion procedures can be similarly indicated to correct maxillary arch constriction in patients with BCLP in the mixed dentition.

Pulsatile flows and wall-shear stresses in models simulating normal and stenosed aortic arches

NASA Astrophysics Data System (ADS)

Huang, Rong Fung; Yang, Ten-Fang; Lan, Y.-K.

2010-03-01

Pulsatile aqueous glycerol solution flows in the models simulating normal and stenosed human aortic arches are measured by means of particle image velocimetry. Three transparent models were used: normal, 25% stenosed, and 50% stenosed aortic arches. The Womersley parameter, Dean number, and time-averaged Reynolds number are 17.31, 725, and 1,081, respectively. The Reynolds numbers based on the peak velocities of the normal, 25% stenosed, and 50% stenosed aortic arches are 2,484, 3,456, and 3,931, respectively. The study presents the temporal/spatial evolution processes of the flow pattern, velocity distribution, and wall-shear stress during the systolic and diastolic phases. It is found that the flow pattern evolving in the central plane of normal and stenosed aortic arches exhibits (1) a separation bubble around the inner arch, (2) a recirculation vortex around the outer arch wall upstream of the junction of the brachiocephalic artery, (3) an accelerated main stream around the outer arch wall near the junctions of the left carotid and the left subclavian arteries, and (4) the vortices around the entrances of the three main branches. The study identifies and discusses the reasons for the flow physics’ contribution to the formation of these features. The oscillating wall-shear stress distributions are closely related to the featured flow structures. On the outer wall of normal and slightly stenosed aortas, large wall-shear stresses appear in the regions upstream of the junction of the brachiocephalic artery as well as the corner near the junctions of the left carotid artery and the left subclavian artery. On the inner wall, the largest wall-shear stress appears in the region where the boundary layer separates.

Multi-objective optimization of an arch dam shape under static loads using an evolutionary game method

NASA Astrophysics Data System (ADS)

Meng, Rui; Cheong, Kang Hao; Bao, Wei; Wong, Kelvin Kian Loong; Wang, Lu; Xie, Neng-gang

2018-06-01

This article attempts to evaluate the safety and economic performance of an arch dam under the action of static loads. The geometric description of a crown cantilever section and the horizontal arch ring is presented. A three-objective optimization model of arch dam shape is established based on the arch dam volume, maximum principal tensile stress and total strain energy. The evolutionary game method is then applied to obtain the optimal solution. In the evolutionary game technique, a novel and more efficient exploration method of the game players' strategy space, named the 'sorting partition method under the threshold limit', is presented, with the game profit functions constructed according to both competitive and cooperative behaviour. By way of example, three optimization goals have all shown improvements over the initial solutions. In particular, the evolutionary game method has potentially faster convergence. This demonstrates the preliminary proof of principle of the evolutionary game method.

[The effect of modified Nance arch on treating maxillary impacted canine transposed with first premolar].

PubMed

Xu, Qing-chao; Sun, Hao; Lin, Yan; Wang, Xiu-ying; Hu, Rong-dang

2015-10-01

To explore the effect of modified Nance arch on treating maxillary canine-first premolar transposition cases, in which the anchorage and force direction were discussed. Modified Nance arch was applied to 5 cases with maxillary impacted canine-first premolar transposition. First, a lingual knot button was bonded on the surface of the canine crown. Modified Nance arch was decorated with a hook that moved horizontally and buccally. Then the location of the hook was gradually adjusted in order to move the canine cross the root of the first premolar and move the canine to the right position. At last the canine was moved downward by straight wire appliance. Five maxillary transposed canines were fully erupted in their right position, with normal pulp activity and gingival morphology. No obvious root resorption was detected. The mean treatment time was 30 months. Modified Nance arch has advantages in treating canine-first premolar transposition.

Collapse displacements for a mechanism of spreading-induced supports in a masonry arch

NASA Astrophysics Data System (ADS)

Coccia, Simona; Di Carlo, Fabio; Rinaldi, Zila

2015-09-01

Masonry arch systems and vaulted structures constitute a structural typology widely spread in the historical building heritage. Small displacements of the supports, due to different causes, among which subsidence of foundation systems or movements of underlying structures can lead the masonry arch to a condition of collapse because of gradual change in its geometry. This paper presents a tool, based on a kinematic approach, for the computation of the magnitude of the displacements that cause the collapse of circular arches subject to dead loads, and allows the evaluation of the related thrust value. A parametric study has been carried out in order to develop a deeper understanding of the influence of the involved parameters. In addition, analytic formulations of the maximum allowed displacement and the associated thrust are proposed. Finally, a case study related to the behavior of a masonry arch on spreading-induced abutments is undertaken and discussed.

Difficulties in distinguishing between an atlas fracture and a congenital posterior atlas arch defect in postmortem analysis.

PubMed

Sanchis-Gimeno, Juan A; Blanco-Perez, Esther; Aparicio, Luis; Martinez-Soriano, Francisco; Martinez-Sanjuan, Vicente

2014-09-01

We found one atlas from a sample of 148 skeletons (0.67%) that presented different anatomical variations which made it difficult to determine whether the vertebra had an atlas fracture, an unusual Type B posterior atlas arch defect, or a combination of both. We carried out a stereomicroscopy, radiographic, and computerized tomography scan study that revealed that the dry atlas we found presented a very uncommon congenital Type B posterior atlas arch defect, simulating a fracture. In short, the present paper has revealed that differentiating Type B posterior atlas arch defects from fractures in post-mortem dry vertebrae is more difficult than expected. Thus we believe that it can be easier than expected to mistake Type B posterior arch defects for fractures and vice versa in postmortem studies. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Cortical bone thickening in Type A posterior atlas arch defects: experimental report.

PubMed

Sanchis-Gimeno, Juan A; Llido, Susanna; Guede, David; Martinez-Soriano, Francisco; Ramon Caeiro, Jose; Blanco-Perez, Esther

2017-03-01

To date, no information about the cortical bone microstructural properties in atlas vertebrae with posterior arch defects has been reported. To test if there is an increased cortical bone thickening in atlases with Type A posterior atlas arch defects in an experimental model. Micro-computed tomography (CT) study on cadaveric atlas vertebrae. We analyzed the cortical bone thickness, the cortical volume, and the medullary volume (SkyScan 1172 Bruker micro-CT NV, Kontich, Belgium) in cadaveric dry vertebrae with a Type A atlas arch defect and normal control vertebrae. The micro-CT study revealed significant differences in cortical bone thickness (p=.005), cortical volume (p=.003), and medullary volume (p=.009) values between the normal and the Type A vertebrae. Type A congenital atlas arch defects present a cortical bone thickening that may play a protective role against atlas fractures. Copyright © 2016 Elsevier Inc. All rights reserved.

Construction Simulation Analysis of 60m-span Concrete Filled Steel Tube arch bridge

NASA Astrophysics Data System (ADS)

Shi, Jing Xian; Ding, Qing Hua

2018-06-01

The construction process of the CFST arch bridge is complicated. The construction process not only affects the structural stress in the installation, but also determines the form a bridge and internal force of the bridge. In this paper, a 60m span concrete filled steel tube tied arch bridge is taken as the background, and a three-dimensional finite element simulation model is established by using the MIDAS/Civil bridge structure analysis software. The elevation of the main arch ring, the beam stress, the forces in hanger rods and the modal frequency of the main arch during the construction stage are calculated, and the construction process is simulated and analyzed. Effectively and reasonably guide the construction and ensure that the line and force conditions of the completed bridge meet the design requirements and provides a reliable technical guarantee for the safe construction of the bridge.

Maxillary Arch Dimensions and Spectral Characteristics of Children with Cleft Lip and Palate Who Produce Middorsum Palatal Stops

ERIC Educational Resources Information Center

Zajac, David J.; Cevidanes, Lucia; Shah, Sonam; Haley, Katarina L.

2012-01-01

Purpose: The purpose of this study was twofold: (a) to determine maxillary arch dimensions of children with repaired cleft lip and palate (CLP) who produced middorsum palatal stops and (b) to describe some spectral characteristics of middorsum palatal stops. Method: Maxillary arch width, length, and height dimensions and first spectral moments of…

Lateral testing of glued laminated timber tudor arch

Treesearch

Douglas R. Rammer; Philip Line

2016-01-01

Glued laminated timber Tudor arches have been in wide use in the United States since the 1930s, but detailed knowledge related to seismic design in modern U.S. building codes is lacking. FEMA P-695 (P-695) is a methodology to determine seismic performance factors for a seismic force resisting system. A limited P-695 study for glued laminated timber arch structures...

Copy image of "'Under the Great Arch' of Refectory Bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Copy image of "'Under the Great Arch' of Refectory Bridge connecting the Dining Room with the Practice House, Delta, and the Villa. The Refectory Cloister is seen beyond the arch"; a similar, but recent, view can be seen in MD-1109-A-16. (NPS view book, p. 25) - National Park Seminary, Main, Linden Lane, Silver Spring, Montgomery County, MD

Arterial Cannulation and Cerebral Perfusion Strategies for Aortic Arch Operations.

PubMed

Foley, Lisa S; Yamanaka, Katsuhiro; Reece, T Brett

2016-12-01

Neurologic injuries following aortic arch operations can be devastating, with stroke occurring in up to 12% of elective operations and significant cerebral dysfunction occurring in up to 25% of cases. The primary challenge unique to aortic arch operations involves interruption of direct perfusion of the brachiocephalic vessels during arch reconstruction. For this reason, neuroprotection is paramount. The 2 main modes of protection are (1) reducing metabolic demand through hypothermia and (2) limiting, or even eliminating, the ischemic period. Preoperative selection of the cerebral perfusion plan for each operation is imperative to maintain maximal diffuse cerebral protection and prevent focal neurologic events. © The Author(s) 2016.

Ultraviolet Events Observed in Active Regions. 2; An Interpretation of Flaring Arches and Associated Small Flares

NASA Technical Reports Server (NTRS)

Fontenla, J.; Rovira, M.; Tandberg-Hanssen, E.

1997-01-01

We analyze Hz, UV, and X-ray emissions in and around the spectacular arch system seen in the corona on 1980 March 27 during the Solar Maximum Mission. The flaring of the arch plasma is studied, and its dependence on triggering mechanisms related to the observed small limb flare in the arch footpoint is analyzed. To drive these events, we propose a mechanism in which small electric current circuits and the localized magnetic free energy are continuously generated at a magnetic null by a pressure gradient, which then compress or expand the plasma. This free energy dissipates by Joule effect and upward transport.

[Foot arch shape in children aged 2-5 years according to the data of plantography and holographic interferometry].

PubMed

bol'shakov, O P; Kotov, I R; Poliakova, E L

2014-01-01

25 children aged 2 to 5 years were examined orthopedically using the methods of plantometry and holographic interferometry of three-dimensional casts of footprints. The computer maps of the foot arch surface were obtained and the graphic reconstruction of the arch shape was performed in normal cases and in children with flatfoot. Most significant deviations of the foot arch shape, probably associated with the development delay, were detected in 4-5-year-old children under the dynamic load. Some additional advantages of holographic interferometry for the early diagnosis of flatfoot in children were demonstrated.

[The clinic skill in fixed appliance based on characteristics of Chinese normal occlusion].

PubMed

Bai, Ding; Luo, Song-jiao; Chen, Yang-xi; Xiao, Li-wei

2005-02-01

To study the bracket placement and arch wire bending based on ethnic differences and individual differences of normal occlusion. The prominence, tip, torque, upper first molar offset of crown and arch form between Chinese and Caucasian normal occlusion were compared. The results showed the ethnic differences of prominence, tip, torque, upper first molar offset of crown and arch form between Chinese and Caucasian normal occlusion. The placement of bracket was influenced by the crown morphology. The adjustments of the bracket placement and arch wire bending with Edgewise and pre-adjusted appliance are necessary to adapt to ethnic difference and individual difference.

Anomalous Origin of the Left Vertebral Artery from the Aortic Arch

PubMed Central

Einstein, Evan H.; Song, Linda H.; Villela, Natalia L. A.; Fasani-Feldberg, Gregory B.; Jacobs, Jonathan L.; Kim, Dolly O.; Nathawat, Akshay; Patel, Devika; Bender, Roger B.; Peters, Daniel F.

2016-01-01

Anatomic anomalies of the aortic arch have implications for clinical practice if their significance is understood. Our case study involves a cadaveric finding of the left vertebral artery originating directly from the aortic arch. Although this anatomical variation has been documented, the prevalence of this anomaly may be generally underestimated. After noting this anomaly, we analyzed 27 cases and found that four female cadavers had the left vertebral artery originating from the aortic arch rather than the left subclavian artery. With a prevalence rate of 14.8%, it would seem that this anomaly is more significant than previously thought, which could have implications for surgical practice. PMID:27757404

Anomalous Origin of the Left Vertebral Artery from the Aortic Arch.

PubMed

Einstein, Evan H; Song, Linda H; Villela, Natalia L A; Fasani-Feldberg, Gregory B; Jacobs, Jonathan L; Kim, Dolly O; Nathawat, Akshay; Patel, Devika; Bender, Roger B; Peters, Daniel F

2016-04-01

Anatomic anomalies of the aortic arch have implications for clinical practice if their significance is understood. Our case study involves a cadaveric finding of the left vertebral artery originating directly from the aortic arch. Although this anatomical variation has been documented, the prevalence of this anomaly may be generally underestimated. After noting this anomaly, we analyzed 27 cases and found that four female cadavers had the left vertebral artery originating from the aortic arch rather than the left subclavian artery. With a prevalence rate of 14.8%, it would seem that this anomaly is more significant than previously thought, which could have implications for surgical practice.

Asymptomatic Interrupted Aortic Arch, Severe Tricuspid Regurgitation, and Bicuspid Aortic Valve in a 76-Year-Old Woman.

PubMed

Tajdini, Masih; Sardari, Akram; Forouzannia, Seyed Khalil; Baradaran, Abdolvahab; Hosseini, Seyed Mohammad Reza; Kassaian, Seyed Ebrahim

2016-10-01

Interrupted aortic arch is a rare congenital abnormality with a high infancy mortality rate. The principal finding is loss of luminal continuity between the ascending and descending portions of the aorta. Because of the high mortality rate in infancy, interrupted aortic arch is very rare among adults. In this report, we describe the case of a 76-year-old woman with asymptomatic interrupted aortic arch, severe tricuspid regurgitation, and bicuspid aortic valve. To our knowledge, she is the oldest patient ever reported with this possibly unique combination of pathologic conditions. In addition to reporting her case, we review the relevant medical literature.

An Experimental Investigation on the Generation of a Stable Arch in Granular Materials Using a Developed Trapdoor Apparatus

NASA Astrophysics Data System (ADS)

Ahmadi, Ali; Seyedi Hosseininia, Ehsan

2017-06-01

This paper discusses the formation of stable arches in granular materials by using a series of laboratory tests. To this aim, a developed trapdoor apparatus is designed to find dimensions of arches formed over the door in cohesionless aggregates. This setup has two new important applications. In order to investigate the maximum width of the opening generated exactly on the verge of failure, the door can be open to an arbitrary size. In addition, the box containing granular materials (or base angle) is able to be set on optional angles from zero to 90 degrees with respect to the horizontal. Therefore, it is possible to understand the effect of different levels of gravity accelerations on the formed arches. It is observed that for all tested granular materials, increasing the door size and decreasing the base angle, both cause to increase the width and height of the arch. Moreover, the shape of all arches is governed by a parabola. Furthermore, the maximum door width is approximately five to 8.6 times the particle size, depending on the internal friction angle of materials and the base angle.

Effect of arch type and Body Mass Index on plantar pressure distribution during stance phase of gait.

PubMed

O'Brien, Davida Louise; Tyndyk, Magdalena

2014-01-01

Several factors have been associated with the presence of abnormally high plantar foot pressure including: (i) increased body weight, (ii) foot structure and (iii) walking strategy. It is predicted that the biomechanics of the foot is influenced by the structure of the foot, primarily the Medial Longitudinal Arch. The objective of this study was to examine if Body Mass Index and the foot arch have a direct effect on dynamic peak plantar pressure for healthy subjects. Following a clinical lower limb examination, the Tekscan HR mat was utilised for this study, plantar pressure was profiled at specific events during stance phase of gait including heel strike, midstance and toe off. Results indicated to the preferable normal arch as this produced a low plantar pressure distribution in all cases. The 2nd and 3rd metatarsal head region recorded the highest pressure for all arch types during dynamic analysis. The lowest pressure for the normal and overweight BMI was at toe-off. While the obese BMI group showed highest pressure during toe-off. The obese BMI flat arch subcategory indicated to functional ambulation differences. Future work involves comparing this healthy database to a demographically matched diabetic group.

Effects of Lower Third Molar Angulation and Position on Lower Arch Crowding.

PubMed

Selmani, Mimoza E; Gjorgova, Julijana; Selmani, Manushaqe E; Shkreta, Mirsad; Duci, Shkelzen B

2016-01-01

The role of the third molars in lower arch crowding has been debated for more than a century. The aim of this study was to determine the relationship between lower arch crowding and the presence of angulation and position of lower third molar. The measurements of the dental arch were made in 120 subjects aged 16 to 21 years, with average age to 18 years. The subjects were divided into two groups: Class I normal occlusion comprised 35 male and 25 female with mean age 18.87years, whereas Class I crowding comprised 27 males and 33 females with mean age 18.5 years. The dental pantomogram (DPT) were used to calculate the ratio of retromolar space (Ganss ratio), angulation of third molar to second molar and third molar to the base of the mandible. The results showed that measurements of Ganss ratio, third molar angulation to the base of the mandible, and third molar to second molar inclination, was statistically significant between crowded and normal groups. It can be concluded that there was a strong relationship between angulation and position of third molars and lower arch crowding. Key words: Third molars, angulation, lower arch, crowding

Monitoring of a concrete arch bridge during construction

NASA Astrophysics Data System (ADS)

Inaudi, Daniele; Ruefenacht, A.; von Arx, B.; Noher, H. P.; Vurpillot, Samuel; Glisic, Branko

2002-06-01

The Siggenthal Bridge is a concrete arch bridge with an arch span of 117 m, being built over the Limmat River in Baden, Switzerland. This bridge has been instrumented with 58 long- gage SOFO fiber optic deformation sensors, 2 inclinometers and 8 temperature sensors to monitor its deformations, curvatures and displacements during construction and int eh long-term. The sensor have been built installed successfully and the arch was monitored during the removal of the formwork and supports. It was therefore possible to observe the deformations of the arch wen being loaded by its dead load and by the daily temperature fluctuations. The measurements have shown that the temperature changes produce deformations of the same order of magnitude as the dead loads. The out-of-plain displacements obtained by double- integration of the measured curvatures are in good agreement with the direct triangulation measurements. Monitoring was also carried out during the construction of the superstructure, with the associated change of the load distribution in the arch. This paper briefly introduces the functional principle of the long-gage sensors used in this application, illustrates their installation and discusses the measurement results obtained during the bridge construction.

A three-dimensional placoderm (stem-group gnathostome) pharyngeal skeleton and its implications for primitive gnathostome pharyngeal architecture.

PubMed

Brazeau, Martin D; Friedman, Matt; Jerve, Anna; Atwood, Robert C

2017-09-01

The pharyngeal skeleton is a key vertebrate anatomical system in debates on the origin of jaws and gnathostome (jawed vertebrate) feeding. Furthermore, it offers considerable potential as a source of phylogenetic data. Well-preserved examples of pharyngeal skeletons from stem-group gnathostomes remain poorly known. Here, we describe an articulated, nearly complete pharyngeal skeleton in an Early Devonian placoderm fish, Paraplesiobatis heinrichsi Broili, from Hunsrück Slate of Germany. Using synchrotron light tomography, we resolve and reconstruct the three-dimensional gill arch architecture of Paraplesiobatis and compare it with other gnathostomes. The preserved pharyngeal skeleton comprises elements of the hyoid arch (probable ceratohyal) and a series of branchial arches. Limited resolution in the tomography scan causes some uncertainty in interpreting the exact number of arches preserved. However, at least four branchial arches are present. The final and penultimate arches are connected as in osteichthyans. A single median basihyal is present as in chondrichthyans. No dorsal (epibranchial or pharyngobranchial) elements are observed. The structure of the pharyngeal skeleton of Paraplesiobatis agrees well with Pseudopetalichthys from the same deposit, allowing an alternative interpretation of the latter taxon. The phylogenetic significance of Paraplesiobatis is considered. A median basihyal is likely an ancestral gnathostome character, probably with some connection to both the hyoid and the first branchial arch pair. Unpaired basibranchial bones may be independently derived in chondrichthyans and osteichthyans. © 2017 The Authors Journal of Morphology Published by Wiley Periodicals, Inc.

Research on the reasonable pile spacing of micro pile composite soil nailing

NASA Astrophysics Data System (ADS)

Liu, Jun yan; Liu, Yan; Song, Xiang hua

2017-08-01

Through the numerical simulation software FLAC3D, study on the synergetic effect of micro pile composite soil nailing will be studied. By adjusting the micro pile spacing and analysing the displacement field and stress field of soil, we can find that supporting effect of the soil nail hasn’t work yet when the micro pile spacing is 2D. The soil arching between piles has been formed in the pile spacing 4D ∼ 6D. The composite effect of micro pile and soil nailing will be the best and the soil arch behind piles will be firstly formed in 6D, the horizontal saddle soil arch will be formed between the nails. The nail head coincidence pressure area and micro pile pressure area are overlapping to maintain stability in the soil between piles. When the micro pile spacing is 9D, the arch behind piles will be failure, the soil flows around, but the saddle arch between the nails into circular arch, the supporting effect of the soil nailing is enhanced. When the micro pile spacing is 12D, the arch of the nails becomes smaller, sliding surface appears primitively. Based on the conclusions above, it is suggested that the micro pile spacing between 2D ∼ 6D is suitable for the micro pile and soil nailing composite support. The conclusion can provide theoretical basis for the design and construction of micro pile composite soil nailing.

Optical Silencing of C. elegans Cells with Arch Proton Pump

PubMed Central

Okazaki, Ayako; Sudo, Yuki; Takagi, Shin

2012-01-01

Background Optogenetic techniques using light-driven ion channels or ion pumps for controlling excitable cells have greatly facilitated the investigation of nervous systems in vivo. A model organism, C. elegans, with its small transparent body and well-characterized neural circuits, is especially suitable for optogenetic analyses. Methodology/Principal Findings We describe the application of archaerhodopsin-3 (Arch), a recently reported optical neuronal silencer, to C. elegans. Arch::GFP expressed either in all neurons or body wall muscles of the entire body by means of transgenes were localized, at least partially, to the cell membrane without adverse effects, and caused locomotory paralysis of worms when illuminated by green light (550 nm). Pan-neuronal expression of Arch endowed worms with quick and sustained responsiveness to such light. Worms reliably responded to repeated periods of illumination and non-illumination, and remained paralyzed under continuous illumination for 30 seconds. Worms expressing Arch in different subsets of motor neurons exhibited distinct defects in the locomotory behavior under green light: selective silencing of A-type motor neurons affected backward movement while silencing of B-type motor neurons affected forward movement more severely. Our experiments using a heat-shock-mediated induction system also indicate that Arch becomes fully functional only 12 hours after induction and remains functional for more than 24 hour. Conclusions/Sgnificance Arch can be used for silencing neurons and muscles, and may be a useful alternative to currently widely used halorhodopsin (NpHR) in optogenetic studies of C. elegans. PMID:22629299

Maxillary arch width and buccal corridor changes with orthodontic treatment. Part 1: differences between premolar extraction and nonextraction treatment outcomes.

PubMed

Meyer, Anna H; Woods, Michael G; Manton, David J

2014-02-01

In this retrospective study, we examined and compared the pretreatment and posttreatment arch widths and buccal corridor changes in subjects who had received orthodontic treatment either with or without premolar extractions. Pretreatment and posttreatment casts, frontal smiling photographs, and lateral cephalograms of 30 extraction and 27 nonextraction patients were analyzed to determine any significant differences in arch widths, buccopalatal inclinations of the teeth, and buccal corridor widths and areas, both within and between the 2 groups. Relationships between buccal corridor measurements and corresponding arch widths and buccopalatal inclinations of the teeth were also examined. There was a significant increase in the posttreatment maxillary intercanine width in the extraction group but not in the nonextraction group. Both the pretreatment and posttreatment arch widths between the maxillary first molars and at the level of the posterior rugae were greater in the nonextraction group than in the extraction group. There were no significant differences in any buccal corridor widths or areas measured between the extraction and nonextraction subjects. Because they reflect different morphologies, there are likely to be significant differences in average maxillary anterior and posterior posttreatment arch widths in those treated with or without extractions. However, these arch width differences are not likely to be discernible in extraction and nonextraction patients as differences in the buccal corridor widths and areas. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Johnson-McMillin syndrome, a neuroectodermal syndrome with conductive hearing loss and microtia: report of a new case.

PubMed

Schweitzer, Daniela N; Yano, Shoji; Earl, Dawn L; Graham, John M

2003-07-30

In 1983, Johnson et al. described 16 related individuals with alopecia, anosmia or hyposmia, conductive hearing loss, microtia and/or atresia of the external auditory canal, and hypogonadotrophic hypogonadism inherited in an autosomal dominant pattern. Other less constant manifestations included facial asymmetry, mental retardation, congenital heart defect, cleft palate, and choanal stenosis. An isolated case was reported later (Johnston et al. [1987: Am J Med Genet 26: 925-927]) and thereafter an affected mother and son (Hennekam and Holtus [1993: Am J Med Genet 47: 714-716]). We describe an additional unrelated female patient with features resembling those of the previously reported cases. She presented with intrauterine growth deficiency, microcephaly, alopecia, bilateral microtia with canal atresia, conductive hearing loss, partial left facial palsy, posterior cleft palate, left choanal stenosis, tetralogy of Fallot, developmental delay, and right thumb polydactyly. Because the phenotypic abnormalities in this syndrome affect the brain, facial structures, ectoderm and its derivatives, outflow tract of the heart, and Rathke's pouch derivatives, this has suggested to previous authors etiologic involvement of the ectoderm and neuroectoderm of the first and second branchial arches, Rathke's pouch, and the diencephalon. Microtia with conductive hearing loss differentiates the condition from other ectodermal dysplasias. In the initial report, females appeared somewhat less affected than males, and there was male-to-male transmission. The mother of our patient manifests subtle features, which suggest she may be a mildly affected female. Additionally, there is a family history of early-onset alopecia in the maternal grandfather's relatives. Copyright 2003 Wiley-Liss, Inc.

Cost of skid roads for arch logging in West Virginia

Treesearch

George R., Jr. Trimble; Carl R. Barr

1960-01-01

In the mountain hardwood country of the northern Appalachians, tree-length skidding with tractor and arch has proved to be economical logging. One essential part of this type of logging is that tree-length logs are winched to the skid roads: tractor and arch do not run around through the woods. Winching distance is commonly 200 to 300 feet; and occasionally an extra...

10. COPY OF OBLIQUE PHOTOGRAPH SHOWING ARCH HANGAR AT RIGHT, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. COPY OF OBLIQUE PHOTOGRAPH SHOWING ARCH HANGAR AT RIGHT, BUILDING 8200 (OBSERVATION TOWER) AT LEFT, AND B-52 AIRCRAFT PARKED ALONG APRON IN BACKGROUND, DATED OCTOBER 1967, PHOTOGRAPH FROM BASE MASTER PLAN LOCATED AT AIR FORCE BASE CONVERSION AGENCY, LORING AIR FORCE BASE, MAINE. - Loring Air Force Base, Arch Hangar, East of Arizona Road near southern end of runway, Limestone, Aroostook County, ME

Stability of an arch type shock absorber made of a rubber-like material

NASA Astrophysics Data System (ADS)

Kabrits, Sergey A.; Kolpak, Eugeny P.

2018-05-01

The paper considers the stability problem of an arch shock absorber made of a rubber-like material. As a model, the nonlinear theory of thin shells from elastomers K.F. Chernykh is used. The case of symmetrical and asymmetrical deformation of an arch shock absorber under symmetrical compression is investigated. The possibility of asymmetric bifurcation is evaluated depending on the boundary conditions.

Nonlinear modes of snap-through motions of a shallow arch

NASA Astrophysics Data System (ADS)

Breslavsky, I.; Avramov, K. V.; Mikhlin, Yu.; Kochurov, R.

2008-03-01

Nonlinear modes of snap-through motions of a shallow arch are analyzed. Dynamics of shallow arch is modeled by a two-degree-of-freedom system. Two nonlinear modes of this discrete system are treated. The methods of Ince algebraization and Hill determinants are used to study stability of nonlinear modes. The analytical results are compared with the data of the numerical simulations.

Agreement in the determination of preformed wire shape templates on plaster models and customized digital arch form diagrams on digital models.

PubMed

Camardella, Leonardo Tavares; Sá, Maiara da Silva Bezerra; Guimarães, Luciana Campos; Vilella, Beatriz de Souza; Vilella, Oswaldo de Vasconcellos

2018-03-01

The aim of this study was to verify the accuracy of preformed wire shape templates on plaster models and those of customized digital arch form diagrams on digital models. Twenty pairs of dental plaster models were randomly selected from the archives of the Department of Orthodontics of Federal Fluminense University, Niterói, Rio de Janeiro, Brazil. All plaster model samples were scanned in a plaster model scanner to create the respective digital models. Three examiners defined the arch form on the mandibular arch of these models by selecting the ideal preformed wire shape template on each plaster model or by making a customized digital arch form on the digital models using a digital arch form customization tool. These 2 arch forms were superimposed by the best-fit method. The greatest differences in the 6 regions on the superimposed arches were evaluated. Each examiner presented a descriptive analysis with the means, standard deviation, and minimum and maximum intervals of the differences on the superimpositions. Intraclass correlation coefficient and paired t tests were used to evaluate the accuracy of the superimpositions. Among the 6 regions analyzed in the superimpositions, the largest differences in the anterior and premolar regions were considered clinically insignificant, whereas the largest differences in the right molar region, especially the second molar area, were considered clinically significant by all 3 examiners. The intraclass correlation coefficients showed a weak correlation in the premolar region and moderate correlations in the anterior and molar regions. The paired t test showed statistically significant differences in the left anterior and premolar regions. The superimpositions between the arch forms on plaster and digital models were considered accurate, and the differences were not clinically significant, with the exception of the second molar area. Despite the favorable results, the requirement of correcting some software problems may hamper the transition from plaster to digital models. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Classification of the height and flexibility of the medial longitudinal arch of the foot.

PubMed

Nilsson, Mette Kjærgaard; Friis, Rikke; Michaelsen, Maria Skjoldahl; Jakobsen, Patrick Abildgaard; Nielsen, Rasmus Oestergaard

2012-02-17

The risk of developing injuries during standing work may vary between persons with different foot types. High arched and low arched feet, as well as rigid and flexible feet, are considered to have different injury profiles, while those with normal arches may sustain fewer injuries. However, the cut-off values for maximum values (subtalar position during weight-bearing) and range of motion (ROM) values (difference between subtalar neutral and subtalar resting position in a weight-bearing condition) for the medial longitudinal arch (MLA) are largely unknown. The purpose of this study was to identify cut-off values for maximum values and ROM of the MLA of the foot during static tests and to identify factors influencing foot posture. The participants consisted of 254 volunteers from Central and Northern Denmark (198 m/56 f; age 39.0 ± 11.7 years; BMI 27.3 ± 4.7 kg/m2). Navicular height (NH), longitudinal arch angle (LAA) and Feiss line (FL) were measured for either the left or the right foot in a subtalar neutral position and subtalar resting position. Maximum values and ROM were calculated for each test. The 95% and 68% prediction intervals were used as cut-off limits. Multiple regression analysis was used to detect influencing factors on foot posture. The 68% cut-off values for maximum MLA values and MLA ROM for NH were 3.6 to 5.5 cm and 0.6 to 1.8 cm, respectively, without taking into account the influence of other variables. Normal maximum LAA values were between 131 and 152° and normal LAA ROM was between -1 and 13°. Normal maximum FL values were between -2.6 and -1.2 cm and normal FL ROM was between -0.1 and 0.9 cm. Results from the multivariate linear regression revealed an association between foot size with FL, LAA, and navicular drop. The cut-off values presented in this study can be used to categorize people performing standing work into groups of different foot arch types. The results of this study are important for investigating a possible link between arch height and arch movement and the development of injuries.

Organ and effective doses in newborn patients during helical multislice computed tomography examination

NASA Astrophysics Data System (ADS)

Staton, Robert J.; Lee, Choonik; Lee, Choonsik; Williams, Matt D.; Hintenlang, David E.; Arreola, Manuel M.; Williams, Jonathon L.; Bolch, Wesley E.

2006-10-01

In this study, two computational phantoms of the newborn patient were used to assess individual organ doses and effective doses delivered during head, chest, abdomen, pelvis, and torso examinations using the Siemens SOMATOM Sensation 16 helical multi-slice computed tomography (MSCT) scanner. The stylized phantom used to model the patient anatomy was the revised ORNL newborn phantom by Han et al (2006 Health Phys.90 337). The tomographic phantom used in the study was that developed by Nipper et al (2002 Phys. Med. Biol. 47 3143) as recently revised by Staton et al (2006 Med. Phys. 33 3283). The stylized model was implemented within the MCNP5 radiation transport code, while the tomographic phantom was incorporated within the EGSnrc code. In both codes, the x-ray source was modelled as a fan beam originating from the focal spot at a fan angle of 52° and a focal-spot-to-axis distance of 57 cm. The helical path of the source was explicitly modelled based on variations in collimator setting (12 mm or 24 mm), detector pitch and scan length. Tube potentials of 80, 100 and 120 kVp were considered in this study. Beam profile data were acquired using radiological film measurements on a 16 cm PMMA phantom, which yielded effective beam widths of 14.7 mm and 26.8 mm for collimator settings of 12 mm and 24 mm, respectively. Values of absolute organ absorbed dose were determined via the use of normalization factors defined as the ratio of the CTDI100 measured in-phantom and that determined by Monte Carlo simulation of the PMMA phantom and ion chamber. Across various technique factors, effective dose differences between the stylized and tomographic phantoms ranged from +2% to +9% for head exams, -4% to -2% for chest exams, +8% to +24% for abdominal exams, -16% to -12% for pelvic exams and -7% to 0% for chest-abdomen-pelvis (CAP) exams. In many cases, however, relatively close agreement in effective dose was accomplished at the expense of compensating errors in individual organ dose. Per cent differences in organ dose between the stylized and tomographic phantoms at 120 kVp and 12 mm collimator setting ranged from -25% (skin) to +164% (muscle) for head exams, -92% (thyroid) to +98% (ovaries) for chest exams, -144% (uterus) to +112% (ovaries) for abdominal exams, -98% (SI wall) to +20% (thymus) for pelvic exams and -60% (extrathoracic airways) to +13% (ovaries) for CAP exams. Better agreement was seen between the two phantom types for organs entirely within the scan field. In these cases, corresponding per cent differences in organ absorbed dose did not vary more than 17%. For all scans, the effective dose was found to range approximately 1-13 mSv across the scan parameters and scan regions. The largest effective dose occurred for CAP scans at 120 kVp.

Occlusal plane location in edentulous patients: a review.

PubMed

Shetty, Sanath; Zargar, Nazia Majeed; Shenoy, Kamalakanth; Rekha, V

2013-09-01

Occlusal plane orientation is an important factor in the construction of a complete denture. Occlusal plane could be oriented using landmarks in the mandibular arch as well as in the maxillary arch. In the mandibular arch there are few landmarks which could be used to orient the occlusal plane like the retromolar pad, corner of the lips (lower lip length) whereas the maxillary arch has a number of landmarks, of which the ala-tragal line is the most commonly used and the same being the most controversial. In the following article different landmarks and its accuracy for orientating the occlusal plane in an edentulous subject as studied by various authors has been discussed.

Performance of 75 millimeter-bore arched outer-race ball bearings

NASA Technical Reports Server (NTRS)

Coe, H. H.; Hamrock, B. J.

1976-01-01

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (.005, .010, and .020 in.). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearing.

Modified lateral orbitotomy for removal of orbital neoplasms in two dogs.

PubMed

Gilger, B C; Whitley, R D; McLaughlin, S A

1994-01-01

A simplified lateral orbitotomy is described that decreases surgical time and lessens tissue dissection, yet maintains the exposure to the orbit provided by other orbitotomy techniques. The approach involves cutting the orbital ligament, incising the temporalis aponeurosis from the dorsal zygomatic arch, making parallel zygomatic arch osteotomies, and reflecting the zygomatic arch ventrally. Closure of the wound involves wiring the zygomatic arch back into place. This orbitotomy procedure provides excellent exposure for removal or biopsy of orbital masses. The use of this technique for surgical excision of orbital masses in two dogs, one with an adenoma of the third eyelid gland and one with an orbital fibrosarcoma, and their subsequent management is described.

Performance of 75-millimeter bore arched outer-race ball bearings

NASA Technical Reports Server (NTRS)

Coe, H. H.; Hamrock, B. J.

1976-01-01

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2,200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (0.005, 0.010, and 0.020 in). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearings

The Ponta Grossa Arch: A proposal for ts configuration and evolution from the interpretation of remote sensing data. M.S. Thesis

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Dealmeida, T. I. R.

1983-01-01

Visual analysis of MSS imagery was used to construct a map of dikes in a wide area of the Ponta Grossa Arch both in the Parana Basin and its basement. Analysis of the map by photographic methods defined the zone of highest density of the dikes, and some aspects of the longitudinal and transverse heterogeneities, as well as localized the apex of the Arch. Borders of the Arch were also suggested. Field investigations confirmed the position of the apex of the flexure on Palezoic sediments and pre-lava Mesozoic sediments. Controversial aspects of the relative absence of dikes in certain units or lithologies and the composition of intrusions surrounding the city of Castro were observed. The apparent synchronism between the activity of the Parana Basin and the Arch is discussed as well as the frequent inverse characteristics of vertical movements. The similarity of rocks in Brazil and Africa is also considered.

The growth of filaments by the condensation of coronal arches

NASA Technical Reports Server (NTRS)

Davis, J. M.; Krieger, A. S.

1982-01-01

A model of filament formation based on the condensation of coronal arches is described. The condensation results from initiating the radiative instability within an arch by superimposing a transient energy supply upon the steady state heating mechanism. The transient energy supply increases the density within the arch so that when it is removed the radiative losses are sufficient to lead to cooling below the minimum in the power loss curve. Times from the initial formation of the condensation to its temperature stabilization as a cool filament have been calculated for various initial conditions. They lie in the range 10,000-100,000 s with the majority of the time spent above a temperature of 1 x 10 to the 6th K. Under the assumption that the condensation of a single arch forms an element of the filament, a complete filament requires the condensation of an arcade of loops. Using experimentally derived parameters, filament densities of 10 to the 11th to 10 to the 12th per cu cm can be obtained.

2. View looking Northeast. The masonry section of the viaduct, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. View looking Northeast. The masonry section of the viaduct, west of the river, was 1,382 feet long and consisted of eight segmental arches of 83 foot span and two segmental arches of 97.5 foot span plus intervening sections of retaining wall. Eight of the Masonry arches, made of Berea Sandstone, still stand - Superior Avenue Viaduct, Cleveland East & West side, Cuyahoga Valley Vicinity, Cleveland, Cuyahoga County, OH

Parascapular mass revealing primary tuberculosis of the posterior arch

PubMed Central

Arbault, Anais; Ornetti, Paul; Chevallier, Olivier; Avril, Julien; Pottecher, Pierre

2016-01-01

We report the case of a parascapular abscess revealing primary tuberculosis of the posterior arch in a 31-year-old man. Sectional imaging is essential in order to detect the different lesions of this atypical spinal tuberculosis as osteolysis of the posterior arch extendible to vertebral body, osteocondensation, epidural extension which is common in this location, and high specificity of a zygapophysial, costo-vertebral or transverse arthritis. PMID:27709081

Fuel cell current collector

DOEpatents

Katz, Murray; Bonk, Stanley P.; Maricle, Donald L.; Abrams, Martin

1991-01-01

A fuel cell has a current collector plate (22) located between an electrode (20) and a separate plate (25). The collector plate has a plurality of arches (26, 28) deformed from a single flat plate in a checkerboard pattern. The arches are of sufficient height (30) to provide sufficient reactant flow area. Each arch is formed with sufficient stiffness to accept compressive load and sufficient resiliently to distribute the load and maintain electrical contact.

Cooperative action of multiple cis-acting elements is required for N-myc expression in branchial arches: specific contribution of GATA3.

PubMed

Potvin, Eric; Beuret, Laurent; Cadrin-Girard, Jean-François; Carter, Marcelle; Roy, Sophie; Tremblay, Michel; Charron, Jean

2010-11-01

The precise expression of the N-myc proto-oncogene is essential for normal mammalian development, whereas altered N-myc gene regulation is known to be a determinant factor in tumor formation. Using transgenic mouse embryos, we show that N-myc sequences from kb -8.7 to kb +7.2 are sufficient to reproduce the N-myc embryonic expression profile in developing branchial arches and limb buds. These sequences encompass several regulatory elements dispersed throughout the N-myc locus, including an upstream limb bud enhancer, a downstream somite enhancer, a branchial arch enhancer in the second intron, and a negative regulatory element in the first intron. N-myc expression in the limb buds is under the dominant control of the limb bud enhancer. The expression in the branchial arches necessitates the interplay of three regulatory domains. The branchial arch enhancer cooperates with the somite enhancer region to prevent an inhibitory activity contained in the first intron. The characterization of the branchial arch enhancer has revealed a specific role of the transcription factor GATA3 in the regulation of N-myc expression. Together, these data demonstrate that correct N-myc developmental expression is achieved via cooperation of multiple positive and negative regulatory elements.

Loss of unc45a precipitates arteriovenous shunting in the aortic arches

PubMed Central

Anderson, Matthew J.; Pham, Van N.; Vogel, Andreas M.; Weinstein, Brant M.; Roman, Beth L.

2008-01-01

Aortic arch malformations are common congenital disorders that are frequently of unknown etiology. To gain insight into the factors that guide branchial aortic arch development, we examined the process by which these vessels assemble in wild type zebrafish embryos and in kurzschlusstr12 (kus tr12) mutants. In wild type embryos, each branchial aortic arch first appears as an island of angioblasts in the lateral pharyngeal mesoderm, then elaborates by angiogenesis to connect to the lateral dorsal aorta and ventral aorta. In kustr12 mutants, angioblast formation and initial sprouting are normal, but aortic arches 5 and 6 fail to form a lumenized connection to the lateral dorsal aorta. Blood enters these blind-ending vessels from the ventral aorta, distending the arteries and precipitating fusion with an adjacent vein. This arteriovenous malformation (AVM), which shunts nearly all blood directly back to the heart, is not genetically programmed, as its formation correlates with blood flow and aortic arch enlargement. By positional cloning, we have identified a nonsense mutation in unc45a in kustr12 mutants. Our results are the first to ascribe a role for Unc45a, a putative myosin chaperone, in vertebrate development, and identify a novel mechanism by which an AVM can form. PMID:18462713

An investigation of the seismic behavior of a deck-type reinforced concrete arch bridge

NASA Astrophysics Data System (ADS)

Farahani, Emadoddin Majdabadi; Maalek, Shahrokh

2017-07-01

This paper attempts to explore potential benefits of form in a deck-type reinforced concrete (RC) arch bridge in connection with its overall seismic behavior and performance. Through a detailed three-dimensional finite element modeling and analysis of an actual existing deck-type RC arch bridge, some useful quantitative information have been derived that may serve for a better understanding of the seismic behavior of such arch bridges. A series of the nonlinear dynamic analyses has been carried out under the action of seven different time histories of ground motion scaled to the AASHTO 2012 response spectrum. The concept of demand to capacity ratios has been employed to provide an initial estimation of the seismic performance of the bridge members. As a consequence of the structural form, a particular type of irregularity is introduced due to variable heights of columns transferring the deck loads to the main arch. Hence, a particular attention has been paid to the internal force/moment distributions within the short, medium, and long columns as well as along the main arch. A study of the effects of the vertical component of ground motion has demonstrated the need for the inclusion of these effects in the analysis of such bridges.

Evaluation of the relationship between the static measurement of transverse arch flexibility of the forefoot and gait parameters in healthy subjects.

PubMed

Kondo, Takashi; Muneta, Takeshi; Fukui, Tsutomu

2017-03-01

[Purpose] To investigate the relationship between the static measurement of the transverse arch of the forefoot, using a 3-dimensional (3D) foot scanner, and kinetics and kinematics of gait parameters in the sagittal plane. [Subjects and Methods] Twenty healthy subjects participated in this study. The transverse arch of the forefoot was measured under three conditions as follows: condition 1, sitting; condition 2, standing; and condition 3, foot forward and lower leg tilting anteriorly to the maximum position with heel contact. Gait parameters were recorded using a 3D motion analysis system and force plate. Correlation coefficients between TAF for each comparison of conditions and gait parameters were calculated using the Spearman correlation analysis. [Results] Rates of the transverse arch of the forefoot width and height between condition 2 and condition 3 were significantly correlated with the anterior and posterior component of ground reaction forces, the hip joint extension angle, and the ankle plantar flexion moment. [Conclusion] Our study's findings indicated that increased stiffness of the transverse arch of the forefoot was related to the increase in ankle plantar moment, and decreased stiffness of the transverse arch of the forefoot was related to the increase in hip joint extension angle during gait.

Rearfoot alignment and medial longitudinal arch configurations of runners with symptoms and histories of plantar fasciitis

PubMed Central

Ribeiro, Ana Paula; Trombini-Souza, Francis; Tessutti, Vitor; Lima, Fernanda Rodrigues; de Camargo Neves Sacco, Isabel; João, Sílvia Maria Amado

2011-01-01

OBJECTIVE: To evaluate and compare rearfoot alignment and medial longitudinal arch index during static postures in runners, with and without symptoms and histories of plantar fasciitis (PF). INTRODUCTION: PF is the third most common injury in runners but, so far, its etiology remains unclear. In the literature, rearfoot misalignment and conformations of the longitudinal plantar arch have been described as risk factors for the development of PF. However, in most of the investigated literature, the results are still controversial, mainly regarding athletic individuals and the effects of pain associated with these injuries. METHODS: Forty-five runners with plantar fasciitis (30 symptomatic and 15 with previous histories of injuries) and 60 controls were evaluated. Pain was assessed by a visual analogue scale. The assessment of rearfoot alignment and the calculations of the arch index were performed by digital photographic images. RESULTS: There were observed similarities between the three groups regarding the misalignments of the rearfoot valgus. The medial longitudinal arches were more elevated in the group with symptoms and histories of PF, compared to the control runners. CONCLUSIONS: Runners with symptoms or histories of PF did not differ in rearfoot valgus misalignments, but showed increases in the longitudinal plantar arch during bipedal static stance, regardless of the presence of pain symptoms. PMID:21808870

Orthodontic Intervention to Impacted and Transposed Lower Canines

PubMed Central

Kılıç, Nihat

2017-01-01

Impacted and transposed teeth cause serious difficulties in tooth eruption and movement as well as esthetic and functional outcomes. Proper treatment planning including good biomechanical control is essential in order to avoid side effects during traction and aligning of the impacted and/or transposed teeth. The purpose of the present study was to present a successfully treated female patient having transposed and impacted lower canines by means of a modified lingual arch and fixed orthodontic appliance. A female patient aged 13 years and 9 months presented to the orthodontic department with a chief compliant of bilateral spacing and missing teeth in mandibular dentition. After leveling and creating sufficient space in the mandibular arch for the canines, a modified lingual arch was cemented to the mandibular first molars. The lingual arch had two hooks extending to the distobuccal areas of the canine spaces. Elastic chains were applied between the hooks on the lingual arch and the ligatures tied to the attachments on the canine crowns. The light forces generated by elastic materials caused impacted canines to erupt and tend towards their own spaces in the dental arch. As a result, impacted and transposed lower canines were properly positioned in their spaces, and the treatment results were stable during the retention period. PMID:28540090

Role of the tranverse arch in stiffness of the human foot

NASA Astrophysics Data System (ADS)

Dias, Marcelo A.; Singh, Dhiraj K.; Bandi, Mahesh M.; Venkadesan, Madhusudhan; Mandre, Shreyas

2015-03-01

Human ancestors evolved from walking, around 6 million years (Ma) ago, to regular endurance running, around 2 Ma ago. Simultaneously, the feet evolved from a relatively flat structure like that of current day Chimpanzees (or our hands), to the modern human foot with two arches, a longitudinal and a transversal arch. The feet play a crucial role in locomotion by providing sufficient stiffness for propulsion, and being soft and pliable to absorb impacts and store energy elastically. Here we show that the transverse arch could play a central role in stiffness modulation. We first treat the foot as an elastic shell that is with intrinsic curvature. Calculations, numerics and physical experiments all show that for a foot-like shell, the stiffness has a power-law dependence on transverse curvature beyond a critical value. On the other hand, for purely longitudinally curved feet, or transverse curvature below the critical value, lead to low stiffness like a flat plate. Discrete realizations of a continuum shell, more closely resembling the human foot, also exhibit curvature induced stiffening. These results shed light on the role of the quintessentially human feature of a doubly arched foot, and suggest mechanical consequences of disorders such as a collapsed arch. HFSP RGY0091/2013.

Evaluation of the relationship between the static measurement of transverse arch flexibility of the forefoot and gait parameters in healthy subjects

PubMed Central

Kondo, Takashi; Muneta, Takeshi; Fukui, Tsutomu

2017-01-01

[Purpose] To investigate the relationship between the static measurement of the transverse arch of the forefoot, using a 3-dimensional (3D) foot scanner, and kinetics and kinematics of gait parameters in the sagittal plane. [Subjects and Methods] Twenty healthy subjects participated in this study. The transverse arch of the forefoot was measured under three conditions as follows: condition 1, sitting; condition 2, standing; and condition 3, foot forward and lower leg tilting anteriorly to the maximum position with heel contact. Gait parameters were recorded using a 3D motion analysis system and force plate. Correlation coefficients between TAF for each comparison of conditions and gait parameters were calculated using the Spearman correlation analysis. [Results] Rates of the transverse arch of the forefoot width and height between condition 2 and condition 3 were significantly correlated with the anterior and posterior component of ground reaction forces, the hip joint extension angle, and the ankle plantar flexion moment. [Conclusion] Our study’s findings indicated that increased stiffness of the transverse arch of the forefoot was related to the increase in ankle plantar moment, and decreased stiffness of the transverse arch of the forefoot was related to the increase in hip joint extension angle during gait. PMID:28356622

A numerical procedure for failure mode detection of masonry arches reinforced with fiber reinforced polymeric materials

NASA Astrophysics Data System (ADS)

Galassi, S.

2018-05-01

In this paper a mechanical model of masonry arches strengthened with fibre-reinforced composite materials and the relevant numerical procedure for the analysis are proposed. The arch is modelled by using an assemblage of rigid blocks that are connected together and, also to the supporting structures, by mortar joints. The presence of the reinforcement, usually a sheet placed at the intrados or the extrados, prevents the occurrence of cracks that could activate possible collapse mechanisms, due to tensile failure of the mortar joints. Therefore, in a reinforced arch failure generally occurs in a different way from the URM arch. The numerical procedure proposed checks, as a function of an external incremental load, the inner stress state in the arch, in the reinforcement and in the adhesive layer. In so doing, it then provides a prediction of failure modes. Results obtained from experimental tests, carried out on four in-scale models performed in a laboratory, have been compared with those provided by the numerical procedure, implemented in ArchiVAULT, a software developed by the author. In this regard, the numerical procedure is an extension of previous works. Although additional experimental investigations are necessary, these former results confirm that the proposed numerical procedure is promising.

Neonatal repair of right interrupted aortic arch with cerebro-myocardial perfusion technique.

PubMed

Takeuchi, Koh; Masuzawa, Akihiro; Kobayashi, Jotaro; Tsuchiya, Keiji

2011-10-01

Right interrupted aortic arch and descending aorta is exceedingly rare and most likely cause respiratory presentation, since patent ductus arteriosus (PDA) courses over the right mainstem bronchus. We report a case of successful neonatal biventricular repair of a right interrupted aortic arch (type B), with an aberrant right subclavian artery ventricular septal defect (VSD) in a 2.7 kg term neonate with DiGeorge syndrome. Patient presented in severe respiratory distress and acidosis at one day old. Two-dimensional (2D) echocardiography revealed aortic arch interruption beyond the common carotid arteries with large perimembranous outlet VSD. Aortic annulus diameter was 4.8 mm and there was no left ventricle (LV) outflow tract obstruction. Three-dimensional (3D) CT-scan confirmed these findings and identified a right-sided ductal arch that continued over the right mainstem bronchus into a right-sided descending aorta and aberrant right subclavian artery. Brachiocephalic perfusion and ductal perfusion was employed for cooling during cardiopulmonary bypass. Under deep hypothermia (27 °C rectal temperature), selective cerebro-myocardial perfusion was used for successful aortic arch repair without sacrificing the aberrant right subclavian artery. A direct tension-free anastomosis was attained. Her postoperative course was uneventful and her respiratory symptoms disappeared postoperatively. Early surgical correction is mandatory for these patients with unique anatomy and presentation.

Role of cranial neural crest cells in visceral arch muscle positioning and morphogenesis in the Mexican axolotl, Ambystoma mexicanum.

PubMed

Ericsson, Rolf; Cerny, Robert; Falck, Pierre; Olsson, Lennart

2004-10-01

The role of cranial neural crest cells in the formation of visceral arch musculature was investigated in the Mexican axolotl, Ambystoma mexicanum. DiI (1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine, perchlorate) labeling and green fluorescent protein (GFP) mRNA injections combined with unilateral transplantations of neural folds showed that neural crest cells contribute to the connective tissues but not the myofibers of developing visceral arch muscles in the mandibular, hyoid, and branchial arches. Extirpations of individual cranial neural crest streams demonstrated that neural crest cells are necessary for correct morphogenesis of visceral arch muscles. These do, however, initially develop in their proper positions also in the absence of cranial neural crest. Visceral arch muscles forming in the absence of neural crest cells start to differentiate at their origins but fail to extend toward their insertions and may have a frayed appearance. Our data indicate that visceral arch muscle positioning is controlled by factors that do not have a neural crest origin. We suggest that the cranial neural crest-derived connective tissues provide directional guidance important for the proper extension of the cranial muscles and the subsequent attachment to the insertion on the correct cartilage. In a comparative context, our data from the Mexican axolotl support the view that the cranial neural crest plays a fundamental role in the development of not only the skeleton of the vertebrate head but also in the morphogenesis of the cranial muscles and that this might be a primitive feature of cranial development in vertebrates. 2004 Wiley-Liss, Inc.

Effects of pre-surgical nasoalveolar moulding on maxillary arch and nasal form in unilateral cleft lip and palate before lip surgery.

PubMed

Fuchigami, T; Kimura, N; Kibe, T; Tezuka, M; Amir, M S; Suga, H; Takemoto, Y; Hashiguchi, M; Maeda-Iino, A; Nakamura, N

2017-11-01

To investigate the effects of pre-surgical nasoalveolar moulding (PNAM) on the maxillary arch and nasal form in patients with unilateral cleft lip and palate (UCLP). This is a retrospective case series study. The subjects were infants with complete UCLP who were treated with PNAM (n = 18) at Kagoshima University Medical and Dental Hospital (Japan) between 2006 and 2013. Maxillary dental casts and facial photographs were taken at the time of the first visit and immediately prior to lip surgery to evaluate the maxillary arch and nasal form changes. The dental casts were scanned with a laser scanner, and changes in the 3-Dimensional coordinates of anatomical landmarks and alveolar cleft width were analysed. Moreover, we investigated the correlation between the changes in the maxillary alveolar arch and nasal form. Regarding the maxillary alveolar arch form, the anterior points of the major segment had moved significantly to the cleft side just prior to the time of lip repair, and the alveolar cleft width was significantly decreased. For nasal form, the inclination and displacement of the columella were significantly improved. The improvement of columella inclination was moderately correlated with the posterior movement of the anterior points of the major segment. These findings indicate that PNAM for infants with UCLP enhanced symmetry in the maxillary alveolar arch and nasolabial form. In addition, the posterior movement of the anterior points of the maxillary alveolar arch was correlated with the improvement of columella deformation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Correlation between hindfoot joint three-dimensional kinematics and the changes of the medial arch angle in stage II posterior tibial tendon dysfunction flatfoot.

PubMed

Zhang, Yi-Jun; Xu, Jian; Wang, Yue; Lin, Xiang-Jin; Ma, Xin

2015-02-01

The aim of this study was to explore the correlation between the kinematics of the hindfoot joint and the medial arch angle change in stage II posterior tibial tendon dysfunction flatfoot three-dimensionally under loading. Computed tomography (CT) scans of 12 healthy feet and 12 feet with stage II posterior tibial tendon dysfunction flatfoot were taken both in non- and full-body-weight-bearing condition. The CT images of the hindfoot bones were reconstructed into three-dimensional models with Mimics and Geomagic reverse engineering software. The three-dimensional changes of the hindfoot joint were calculated to determine their correlation to the medial longitudinal arch angle. The medial arch angle change was larger in stage II posterior tibial tendon dysfunction flatfoot compared to that in healthy foot under loading. The rotation and translation of the talocalcaneal joint, the talonavicular joint and the calcanocuboid joint had little influence on the change of the medial arch angle in healthy foot. However, the eversion of the talocalcaneal joint, the proximal translation of the calcaneus relative to the talus and the dorsiflexion of talonavicular joint could increase the medial arch angle in stage II posterior tibial tendon dysfunction flatfoot under loading. Joint instability occurred in patients with stage II posterior tibial tendon dysfunction flatfoot under loading. Limitation of over movement of the talocalcaneal joint and the talonavicular joint may help correct the medial longitudinal arch in stage II posterior tibial tendon dysfunction flatfoot. Copyright © 2014 Elsevier Ltd. All rights reserved.

Anatomic variations of the branches of the aortic arch in a Peruvian population.

PubMed

Huapaya, Julio Arturo; Chávez-Trujillo, Kristhy; Trelles, Miguel; Dueñas Carbajal, Roy; Ferrandiz Espadin, Renato

2015-07-31

Previous publications from two countries in South America found one anatomical variation not previously reported in the rest of the world, which in turn give some clues with regard to a racial difference. The objective of the present study is to describe variations in the anatomical distribution of the branches of the aortic arch in a Peruvian population. To describe variations in the anatomical distribution of the branches of the aortic arch in a Peruvian population. A descriptive study of patients who underwent a tomography angiography of the aorta was performed. We analyzed the reports that showed the description of the variations of the branches of the aortic arch based on the eight types currently described in the literature. From 361 analyzed reports, 282 patients (78.12%) had a normal aortic arch configuration (type I; aortic arch gives rise to the brachiocephalic trunk, left common carotid and left subclavian arteries); followed by type II (left common carotid artery as a branch of the aorta) with 41 patients (11.36%); and type IX (common ostium for the brachiocephalic trunk and the left common carotid artery) with 25 patients (6.93%). The latter and two other types are new variations. Aortic Arch Type I, Type II and Type IX were the most frequent variations in this Peruvian study. Additionally, we also found two more new types that have not been previously described in the literature. Further investigation regarding these variations is needed in order to assess a racial factor in South America and possible relationships with clinical or surgical events.

Influence of Custom Trays, Dual-Arch Passive, Flexed Trays and Viscosities of Elastomeric Impression Materials on Working Dies.

PubMed

Arora, Mansi; Kohli, Shivani; Kalsi, Rupali

2016-05-01

Dual arch impression technique signifies an essential improvement in fixed prosthodontics and has numerous benefits over conventional impression techniques. The accuracy of working dies fabricated from dual arch impression technique remains in question because there is little information available in the literature. This study was conducted to compare the accuracy of working dies fabricated from impressions made from two different viscosities of impression materials using metal, plastic dual arch trays and custom made acrylic trays. The study samples were grouped into two groups based on the viscosity of impression material used i.e. Group I (monophase), whereas Group II consisted of Dual Mix technique using a combination of light and heavy body material. These were further divided into three subgroups A, B and C depending on the type of impression tray used (metal dual arch tray, plastic dual arch tray and custom made tray). Measurements of the master cast were made using profile projector. Descriptive statistics like mean, Standard Deviation (SD) were calculated for all the groups. One way analysis of variance (ANOVA) was used for multiple group comparisons. A p-value of 0.05 or less was considered statistically significant. The gypsum dies obtained with the three types of impression trays using two groups of impression materials were smaller than the master models in dimensions. The plastic dual arch trays produced dies which were the least accurate of the three groups. There was no significant difference in the die dimensions obtained using the two viscosities of impression materials.

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

PubMed

Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

2018-01-01

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Speech evaluation and dental arch shape following pushback palatoplasty in cleft palate patients: Supraperiosteal flap technique versus mucoperiosteal flap technique.

PubMed

Ito, Shizuyo; Noguchi, Makoto; Suda, Yoshiyuki; Yamaguchi, Akira; Kohama, Geniku; Yamamoto, Etsuhide

2006-04-01

The aim of this study was to evaluate and compare the maxillary dental arch shape and speech of cleft palate patients following pushback palatoplasty using either the supraperiosteal flap technique or the mucoperiosteal flap technique. Sixty-two patients (29, cleft palate only; 33, unilateral cleft lip, alveolus and palate) operated on by the supraperiosteal technique and 47 patients (23, cleft palate only; 24 unilateral cleft lip, alveolus and palate) by the mucoperiosteal technique were reviewed in this study. Dental arch shape and speech proficiency at preschool and school age were evaluated in all patients. Dental arch shapes were classified as U type (good dental arch shape) and V type (narrow dental arch shape). In cleft palate only patients, U type was observed in 90% of the supraperiosteal group and 83% of the mucoperiosteal group. In unilateral cleft lip, alveolus and palate patients, U type was observed in 85% of the supraperiosteal group, while only in 33% of the mucoperiosteal group. In cleft palate only patients, normal speech at school age was observed 100% of the supraperiosteal group and 83% of the mucoperiosteal group. In unilateral cleft lip, alveolus and palate patients, normal speech at school age was observed in 97% of the supraperiosteal group and 75% of the mucoperiosteal group. Misarticulation was frequently found in patients with the V type of dental arch shape. It is suggested that pushback palatoplasty using the supraperiosteal technique is more advantageous for speech development compared with the mucoperiosteal technique.

Influence of Custom Trays, Dual-Arch Passive, Flexed Trays and Viscosities of Elastomeric Impression Materials on Working Dies

PubMed Central

Kohli, Shivani; Kalsi, Rupali

2016-01-01

Introduction Dual arch impression technique signifies an essential improvement in fixed prosthodontics and has numerous benefits over conventional impression techniques. The accuracy of working dies fabricated from dual arch impression technique remains in question because there is little information available in the literature. Aim This study was conducted to compare the accuracy of working dies fabricated from impressions made from two different viscosities of impression materials using metal, plastic dual arch trays and custom made acrylic trays. Materials and Methods The study samples were grouped into two groups based on the viscosity of impression material used i.e. Group I (monophase), whereas Group II consisted of Dual Mix technique using a combination of light and heavy body material. These were further divided into three subgroups A, B and C depending on the type of impression tray used (metal dual arch tray, plastic dual arch tray and custom made tray). Measurements of the master cast were made using profile projector. Descriptive statistics like mean, Standard Deviation (SD) were calculated for all the groups. One way analysis of variance (ANOVA) was used for multiple group comparisons. A p-value of 0.05 or less was considered statistically significant. Results The gypsum dies obtained with the three types of impression trays using two groups of impression materials were smaller than the master models in dimensions. Conclusion The plastic dual arch trays produced dies which were the least accurate of the three groups. There was no significant difference in the die dimensions obtained using the two viscosities of impression materials. PMID:27437342

Interactions of Ultracold Impurity Particles with Bose-Einstein Condensates

DTIC Science & Technology

2015-06-23

Lukin et al ., Phys. Rev. Lett. 87, 037901 (2001). [2] D. Jaksch et al ., Phys. Rev. Lett. 85, 2208 (2000). [3] L. Isenhower et al ., Phys. Rev. Lett...104, 010503 (2010). [4] T. Wilk et al ., Phys. Rev. Lett. 104, 010502 (2010). [5] I. Mourachko et al ., Phys. Rev. Lett. 80, 253 (1998). [6] W. R...Phys. 12, 103044 (2010). [12] R. M. W. van Bijnen et al ., J. Phys. B 44, 184008 (2011). [13] I. Lesanovsky, Phys. Rev. Lett. 106, 025301 (2011). [14] E

Dental arch dimensional changes after adenoidectomy or tonsillectomy in children with airway obstruction: A meta-analysis and systematic review under PRISMA guidelines.

PubMed

Zhu, Yanfei; Li, Jiaying; Tang, Yanmei; Wang, Xiaoling; Xue, Xiaochen; Sun, Huijun; Nie, Ping; Qu, Xinhua; Zhu, Min

2016-09-01

Children with severe airway obstruction tend to have a vertical direction of growth, class II malocclusion, and narrow arches. Adenoidectomy and tonsillectomy were recommended for the promotion of balanced dentition growth in these children.The aim of this study was to determine the effect of adenoidectomy and tonsillectomy on the growth of dental morphology in children with airway obstruction. A comprehensive search of the Medline, Embase, Web of science, and OVID databases for studies published through to January 17, 2016 was conducted. Prospective, comparative, clinical studies assessing the efficacy of adenoidectomy, or tonsillectomy in children with airway obstruction were included. The weighted mean difference (WMD) and 95% confidence interval (CI) were used for continuous variables. Forest plots were drawn to demonstrate effects in the meta-analyses. Eight papers were included in our study. We found that adenoidectomy and tonsillectomy led to a significant change in nasal-breathing in children with airway obstruction. Children with airway obstruction had a significantly narrower posterior maxillary dental arch than children without airway obstruction (WMD = -0.94, 95% CI [-1.13, -0.76]; P < 0.001). After surgery, these children still had a significantly narrower dental arch than the nasal-breathing children (WMD = -0.60, 95% CI [-0.79, -0.42]; P < 0.001). In terms of dental arch width, malocclusion, palatal height, overjet, overbite, dental arch perimeter, and arch length, a tendency toward normalization was evident following adenoidectomy or tonsillectomy, with no significant differences evident between the surgical group and the normal group. The small number of studies and lack of randomized controlled trials were the main limitations of this meta-analysis. Following adenoidectomy and tonsillectomy, the malocclusion and narrow arch width of children with airway obstruction could not be completely reversed. Therefore, other treatments such as functional training or orthodontic maxillary widening should be considered after removing the obstruction in the airway.

A radiographic and anthropometric study of the effect of a contoured sandal and foot orthosis on supporting the medial longitudinal arch.

PubMed

Escalona-Marfil, Carles; McPoil, Thomas G; Mellor, Rebecca; Vicenzino, Bill

2014-01-01

In-shoe foot orthoses improve conditions such as plantar heel pain (fasciitis), probably due to their ability to raise the medial longitudinal arch of the foot and lower the stress on the plantar tissues. Increasingly the arch-profile form of the in-shoe foot orthosis is being incorporated into sandal footwear, providing an alternative footwear option for those who require an orthosis. The purpose of this study was to evaluate if a sandal that incorporates the arch-profile of an in-shoe foot orthosis does indeed raise the medial longitudinal arch. Three commercially available non-medical devices (contoured and flat sandal, prefabricated in-shoe orthosis) worn by healthy individuals were studied in two independent experiments, one using radiographic measurements in Australia (n = 11, 6 female, age 26.1 ± 4.3 yrs, BMI 22.0 ± 2.4 kg/m(2)) and the other utilising anthropometric measures in the USA (n = 10, 6 female, age 26.3 ± 3.8 yrs, BMI 23.5 ± 3.7 kg/m(2)). A barefoot condition was also measured. Dorsal arch height was measured in both experiments, as well as in subtalar neutral in the anthropometric experiment. One way repeated measures ANOVA with follow up Bonferroni-corrected pairwise comparisons were used to test differences between the conditions (contoured and flat sandal, orthosis, barefoot). Mean difference and 95% confidence intervals (CI) and standardised mean differences (SMD) were also calculated. The contoured sandal significantly increased dorsal arch height compared to barefoot and flat sandal in both the anthropometric and radiographic experiments with SMD ranging from 0.95 (mean difference 5.1 mm (CI: 0.3, 1.6)) to 1.8 (4.3 mm (1.9, 6.6)). There were small differences between the contoured sandal and orthosis of 1.9 mm (0.6, 3.3) in the radiographic experiment and 1.2 mm (-0.4, 0.9) in the anthropometric experiment. The contoured sandal approximated the subtalar neutral position (0.4 mm (-0.5, 0.7)). Medial longitudinal arch height is elevated by contoured sandals and approximates subtalar joint neutral position of the foot and that achieved by an orthosis. Practitioners wanting to increase the medial longitudinal arch can do so with either an orthosis or a contoured sandal that includes the raised arch profile form of an orthosis.

Global Well-Posedness and Decay Rates of Strong Solutions to a Non-Conservative Compressible Two-Fluid Model

NASA Astrophysics Data System (ADS)

Evje, Steinar; Wang, Wenjun; Wen, Huanyao

2016-09-01

In this paper, we consider a compressible two-fluid model with constant viscosity coefficients and unequal pressure functions {P^+neq P^-}. As mentioned in the seminal work by Bresch, Desjardins, et al. (Arch Rational Mech Anal 196:599-629, 2010) for the compressible two-fluid model, where {P^+=P^-} (common pressure) is used and capillarity effects are accounted for in terms of a third-order derivative of density, the case of constant viscosity coefficients cannot be handled in their settings. Besides, their analysis relies on a special choice for the density-dependent viscosity [refer also to another reference (Commun Math Phys 309:737-755, 2012) by Bresch, Huang and Li for a study of the same model in one dimension but without capillarity effects]. In this work, we obtain the global solution and its optimal decay rate (in time) with constant viscosity coefficients and some smallness assumptions. In particular, capillary pressure is taken into account in the sense that {Δ P=P^+ - P^-=fneq 0} where the difference function {f} is assumed to be a strictly decreasing function near the equilibrium relative to the fluid corresponding to {P^-}. This assumption plays an key role in the analysis and appears to have an essential stabilization effect on the model in question.

Shoe inserts alter plantar loading and function in patients with midfoot arthritis.

PubMed

Rao, Smita; Baumhauer, Judith F; Becica, Laura; Nawoczenski, Deborah A

2009-07-01

Experimental laboratory study supplemented by a case series. (1) To assess the effect of a 4-week intervention with a full-length insert on functional outcomes in patients with midfoot arthritis; (2) to examine the effect of the custom molded three-quarter-length (3Q) and full-length (FL) carbon graphite insert on plantar loading in patients with midfoot arthritis. Given the coexistence of pain and lower-arched foot alignment in patients with midfoot arthritis, arch-restoring orthotic devices such as the 3Q insert are frequently recommended. However, patients continue to report foot pain despite using the 3Q insert. The FL insert has been proposed as an alternative, but objective data examining its efficacy are lacking. Twenty female patients with midfoot arthritis participated in the study. Functional outcomes were assessed using the Foot Function Index-Revised (FFI-R). Plantar loading during walking was measured in the following conditions: shoe only, shoe with 3Q insert, and shoe with FL insert. Repeated-measures analyses of variance with post hoc analyses were used for statistical analysis. FL insert use for 4 weeks resulted in a 12% improvement in total FFI-R score (mean +/- SD before, 35.6 +/- 10.9; after, 31.1 +/- 9.8 [P = .03]). FL insert use resulted in a 20% reduction in medial midfoot average pressure loading (mean +/- SD, 64.8 +/- 20.4 and 51.0 +/- 15.4 kPa, with 3Q and FL insert respectively [P = .015]) and an 8.5% reduction in medial midfoot contact time (mean +/- SD, 84.9% +/- 6.4% and 76.4% +/- 7.1% of stance, with 3Q and FL insert respectively [P<.01]), compared to the 3Q insert. No differences in plantar loading were discerned between the shoe-only and FL conditions. Symptomatic improvement in patients with midfoot arthritis treated with a FL insert was accompanied by reduced magnitude and duration of loading under the medial midfoot. These preliminary outcomes suggest that the FL insert may be a viable alternative in the conservative management of patients with midfoot arthritis. Therapy, level 4. J Orthop Sports Phys Ther 2009;39(7):522-531. doi:10.2519/jospt.2009.2900.

Cell Motility and Invasiveness of Neurofibromin-Deficient Neural Crest Cells and Malignant Triton Tumor Lines

DTIC Science & Technology

2005-06-01

derived cells, we isolated first branchial arch mesenchymal populations, as well as trigeminal ganglion non-neuronal cells, from mouse embryos and measured...demonstrate that loss of neurofibromin affects the invasiveness of neural crest-derived (trigeminal ganglion) and cranial mesenchymal ( branchial arch) cell...trigeminal and branchial arch cells between El0 and El 2 indicates that the roles of neurofibromin in controlling motility may become increasingly

Aortic Arch Aneurysms: Treatment with Extra anatomical Bypass and Endovascular Stent-Grafting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kato, Noriyuki; Shimono, Takatsugu; Hirano, Tadanori

2002-10-15

Endovascular repair of thoracic aortic aneurysms is emerging as an attractive alternative to surgical graft replacement. However,patients with aortic arch aneurysms are often excluded from the target of endovascular repair because of lack of suitable landing zones, especially at the proximal ones. In this paper we describe our method for treating patients with aortic arch aneurysms using a combination of extra anatomical bypass surgery and endovascular stent-grafting.

Structural safety evaluation of Gerber Arch Dam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrie, R.E.

1995-12-31

Gerber Dam, a variable radius arch structure, has experienced seepage and extensive freeze-thaw damage since its construction. A construction key was found cracked at its crest. A finite element investigation was made to evaluate the safety of the arch structure. Design methods and assumptions are evaluated. Historical performance is used in the evaluation. Stress levels, patterns, and distributions were evaluated for loads the structure has experienced to determine behavior contributing to seepage and cracking.

Free in-plane vibration of circular arches.

NASA Technical Reports Server (NTRS)

Veletsos, A. S.; Austin, W. J.; Lopes Pereira, C. A.; Wung, S.-J.

1972-01-01

Numerical data are presented for the natural frequencies and modes of vibration of hinged and fixed, uniform, circular arches vibrating in their own plane, and the effects of the various parameters affecting the response are analyzed. It is shown that the vibrational modes may be almost purely flexural, or almost purely extensional, or the extensional and flexural actions may be strongly coupled. The conditions of occurrence of each type of behavior are defined, and simple approximate formulas are derived; using these formulas, the free vibrational characteristics of arches may be estimated to a satisfactory degree of accuracy for most practical applications. The approach used to derive the approximate formulas may also be applied to arches having other boundary conditions, shapes, or distributions of stiffness and mass.

Buckling of Low Arches or Curved Beams of Small Curvature

NASA Technical Reports Server (NTRS)

Fung, Y C; Kaplan, A

1952-01-01

A general solution, based on the classical buckling criterion, is given for the problem of buckling of low arches under a lateral loading acting toward the center of curvature. For a sinusoidal arch under sinusoidal loading, the critical load can be expressed exactly as a simple function of the beam dimension parameters. For other arch shapes and load distributions, approximate values of the critical load can be obtained by summing a few terms of a rapidly converging Fourier series. The effects of initial end thrust and axial and lateral elastic support are discussed. The buckling load based on energy criterion of Karman and Tsien is also calculated. Results for both the classical and the energy criteria are compared with experimental results.

Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN. [thrust loads

NASA Technical Reports Server (NTRS)

Coe, H. H.

1976-01-01

An experimental investigation was performed to determine the operating characteristics of arched outer-race bearings and to compare the data with those for a similar, but conventional, deep-groove ball bearing. The bearings were tested over a range of shaft speeds up to 28,000 rpm at a thrust load of 2200 newtons (500 lb). One bearing was operated at 26,000 rpm with a range of thrust loads. The amounts of arching were 0.13, 0.25, and 0.51 millimeter (0.005, 0.010, and 0.020 in.). All bearings operated satisfactorily; the arched bearing outer-race temperatures and torques were consistently higher than those for the conventional bearing.

Post-flare coronal arches observed with the SMM/XRP flat crystal spectrometer

NASA Technical Reports Server (NTRS)

Hick, Paul; Svestka, Zdenek; Smith, Kermit L.; Strong, Keith T.

1987-01-01

Postflare coronal arch observations made with the SMM Flat Crystal Spectrometer on January 20-23, 1985 are discussed. Results suggest that the arch revival following the dynamic flare of 23:50 UT on January 1 was of the type noted on November 6-8 and June 4, 1980 by the SMM Hard X-ray Imaging Spectrometer (HXIS). Activity different from that of the HXIS observations was found starting at about 23 UT on January 22, with no trigger of the revival being identified, and with the activity being restricted to the coronal regions (without any related disturbance in the chromosphere). The development of the arch enhancement in the corona was shown to be slower than is expected for a flare-associated revival.

Post-flare coronal arches observed with the SMM/XRP flat crystal spectrometer

NASA Astrophysics Data System (ADS)

Hick, Paul; Svestka, Zdenek; Smith, Kermit L.; Strong, Keith T.

1987-09-01

Postflare coronal arch observations made with the SMM Flat Crystal Spectrometer on January 20-23, 1985 are discussed. Results suggest that the arch revival following the dynamic flare of 23:50 UT on January 1 was of the type noted on November 6-8 and June 4, 1980 by the SMM Hard X-ray Imaging Spectrometer (HXIS). Activity different from that of the HXIS observations was found starting at about 23 UT on January 22, with no trigger of the revival being identified, and with the activity being restricted to the coronal regions (without any related disturbance in the chromosphere). The development of the arch enhancement in the corona was shown to be slower than is expected for a flare-associated revival.

Risk Factors and Protective Factors for Lower-Extremity Running Injuries A Systematic Review.

PubMed

Gijon-Nogueron, Gabriel; Fernandez-Villarejo, Marina

2015-11-01

A review of the scientific literature was performed 1) to identify studies describing the most common running injuries and their relation to the risk factors that produce them and 2) to search for potential and specific protective factors. Spanish and English biomedical search engines and databases (MEDLINE/PubMed, Database Enfermería Fisioterapia Podología [ENFISPO], Cochrane Library, and Cumulative Index to Nursing and Allied Health Literature) were queried (February 1 to November 30, 2013). A critical reading and assessment was then performed by the Critical Appraisal Skills Programme Spanish tool. In total, 276 abstracts that contained the selected key words were found. Of those, 25 identified and analyzed articles were included in the results. Injuries result from inadequate interaction between the runner's biomechanics and external factors. This leads to an excessive accumulation of impact peak forces in certain structures that tends to cause overuse injuries. The main reasons are inadequate muscle stabilization and pronation. These vary depending on the runner's foot strike pattern, foot arch morphology, and sex. Specific measures of modification and control through running footwear are proposed.

Multiple template-based fluoroscopic tracking of lung tumor mass without implanted fiducial markers

NASA Astrophysics Data System (ADS)

Cui, Ying; Dy, Jennifer G.; Sharp, Gregory C.; Alexander, Brian; Jiang, Steve B.

2007-10-01

Precise lung tumor localization in real time is particularly important for some motion management techniques, such as respiratory gating or beam tracking with a dynamic multi-leaf collimator, due to the reduced clinical tumor volume (CTV) to planning target volume (PTV) margin and/or the escalated dose. There might be large uncertainties in deriving tumor position from external respiratory surrogates. While tracking implanted fiducial markers has sufficient accuracy, this procedure may not be widely accepted due to the risk of pneumothorax. Previously, we have developed a technique to generate gating signals from fluoroscopic images without implanted fiducial markers using a template matching method (Berbeco et al 2005 Phys. Med. Biol. 50 4481-90, Cui et al 2007 Phys. Med. Biol. 52 741-55). In this paper, we present an extension of this method to multiple-template matching for directly tracking the lung tumor mass in fluoroscopy video. The basic idea is as follows: (i) during the patient setup session, a pair of orthogonal fluoroscopic image sequences are taken and processed off-line to generate a set of reference templates that correspond to different breathing phases and tumor positions; (ii) during treatment delivery, fluoroscopic images are continuously acquired and processed; (iii) the similarity between each reference template and the processed incoming image is calculated; (iv) the tumor position in the incoming image is then estimated by combining the tumor centroid coordinates in reference templates with proper weights based on the measured similarities. With different handling of image processing and similarity calculation, two such multiple-template tracking techniques have been developed: one based on motion-enhanced templates and Pearson's correlation score while the other based on eigen templates and mean-squared error. The developed techniques have been tested on six sequences of fluoroscopic images from six lung cancer patients against the reference tumor positions manually determined by a radiation oncologist. The tumor centroid coordinates automatically detected using both methods agree well with the manually marked reference locations. The eigenspace tracking method performs slightly better than the motion-enhanced method, with average localization errors less than 2 pixels (1 mm) and the error at a 95% confidence level of about 2-4 pixels (1-2 mm). This work demonstrates the feasibility of direct tracking of a lung tumor mass in fluoroscopic images without implanted fiducial markers using multiple reference templates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Xinhua; Zhang, Da; Liu, Bob, E-mail: bliu7@mgh.harvard.edu

Purpose: The knowledge of longitudinal dose distribution provides the most direct view of the accumulated dose in computed tomography (CT) scanning. The purpose of this work was to perform a comprehensive study of dose distribution width and energy absorption with a wide range of subject sizes and beam irradiated lengths. Methods: Cumulative dose distribution along the z-axis was calculated based on the previously published CT dose equilibration data by Li, Zhang, and Liu [Med. Phys. 40, 031903 (10pp.) (2013)] and a mechanism for computing dose on axial lines by Li, Zhang, and Liu [Med. Phys. 39, 5347–5352 (2012)]. Full widthmore » at half maximum (FWHM), full width at tenth maximum (FWTM), the total energy (E) absorbed in a small cylinder of unit mass per centimeter square about the central or peripheral axis, and the energy (E{sub in}) absorbed inside irradiated length (L) were subsequently extracted from the dose distribution. Results: Extensive results of FWHM, FWTM, and E{sub in}/E were presented on the central and peripheral axes of infinitely long PMMA (diameters 6–50 cm) and water (diameters 6–55 cm) cylinders with L < 100 cm. FWHM was greater than the primary beam width only on the central axes of large phantoms and also with L ranging from a few centimeter to about 33 cm. FWTM generally increased with phantom diameter, and could be up to 32 cm longer than irradiated length, depending on L, phantom diameter and axis, but was insensitive to phantom material (PMMA or water). E{sub in}/E increased with L and asymptotically approached unity for large L. As phantom diameter increased, E{sub in}/E generally decreased, but asymptotically approached constant levels on the peripheral axes of large phantoms. A heuristic explanation of dose distribution width results was presented. Conclusions: This study enables the reader to gain a comprehensive view of dose distribution width and energy absorption and provides useful data for estimating doses to organs inside or beyond the irradiated region. The dose length product (DLP) presented by CT scanners is equal to neither E nor E{sub in}. Both E and E{sub in} can be evaluated using the equations and results presented in this paper and are robust with both constant and variable tube current scanning techniques.« less

Estimating radiofrequency power deposition in body NMR imaging.

PubMed

Bottomley, P A; Redington, R W; Edelstein, W A; Schenck, J F

1985-08-01

Simple theoretical estimates of the average, maximum, and spatial variation of the radiofrequency power deposition (specific absorption rate) during hydrogen nuclear magnetic resonance imaging are deduced for homogeneous spheres and for cylinders of biological tissue with a uniformly penetrating linear rf field directed axially and transverse to the cylindrical axis. These are all simple scalar multiples of the expression for the cylinder in an axial field published earlier (Med. Phys. 8, 510 (1981]. Exact solutions for the power deposition in the cylinder with axial (Phys. Med. Biol. 23, 630 (1978] and transversely directed rf field are also presented, and the spatial variation of power deposition in head and body models is examined. In the exact models, the specific absorption rates decrease rapidly and monotonically with decreasing radius despite local increases in rf field amplitude. Conversion factors are provided for calculating the power deposited by Gaussian and sinc-modulated rf pulses used for slice selection in NMR imaging, relative to rectangular profiled pulses. Theoretical estimates are compared with direct measurements of the total power deposited in the bodies of nine adult males by a 63-MHz body-imaging system with transversely directed field, taking account of cable and NMR coil losses. The results for the average power deposition agree within about 20% for the exact model of the cylinder with axial field, when applied to the exposed torso volume enclosed by the rf coil. The average values predicted by the simple spherical and cylindrical models with axial fields, the exact cylindrical model with transverse field, and the simple truncated cylinder model with transverse field were about two to three times that measured, while the simple model consisting of an infinitely long cylinder with transverse field gave results about six times that measured. The surface power deposition measured by observing the incremental power as a function of external torso radius was comparable to the average value. This is consistent with the presence of a variable thickness peripheral adipose layer which does not substantially increase surface power deposition with increasing torso radius. The absence of highly localized intensity artifacts in 63-MHz body images does not suggest anomalously intense power deposition at localized internal sites, although peak power is difficult to measure.

Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

PubMed

Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

2015-12-01

In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3 mm. There was a 4° decrease in the mandibular plane angle to close the skeletal open bite. Retrospective sequential iterations (FEA animation) simulated the clinical response, as documented with longitudinal cephalometrics. The level of periodontal ligament stress was relatively uniform (<5 kPa) for all teeth in the mandibular arch segment. En-masse retraction of the mandibular arch is efficient for conservatively treating a skeletal Class III malocclusion. Posterior mandibular anchorage causes intrusion of the molars to close the vertical dimension of the occlusion and the mandibular plane angle. Instantaneous FEA as modeled here could be used to reasonably predict the clinical results of an applied load. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Fifty years of Jaynes-Cummings physics

NASA Astrophysics Data System (ADS)

Greentree, Andrew D.; Koch, Jens; Larson, Jonas

2013-11-01

This special issue commemorates the 50th anniversary of the seminal paper published by E T Jaynes and F W Cummings [1], the fundamental model which they introduced and now carries their names, and celebrates the remarkable host of exciting research on Jaynes-Cummings physics throughout the last five decades. The Jaynes-Cummings model has been taking the prominent stance as the 'hydrogen atom of quantum optics' [2]. Generally speaking, it provides a fundamental quantum description of the simplest form of coherent radiation-matter interaction. The Jaynes-Cummings model describes the interaction between a single electromagnetic mode confined to a cavity, and a two-level atom. Energy is exchanged between the field and the atom, which leads directly to coherent population oscillations (Rabi oscillations) and superposition states (dressed states). Being exactly solvable, the Jaynes-Cummings model serves as a most useful toy model, and as such it is a textbook example of the physicists' popular strategy of simplifying a complex problem to its most elementary constituents. Thanks to the simplicity of the Jaynes-Cummings model, this caricature of coherent light-matter interactions has never lost its appeal. The Jaynes-Cummings model is essential when discussing experiments in quantum electrodynamics (indeed the experimental motivation of the Jaynes-Cummings model was evident already in the original paper, dealing as it does with the development of the maser), and it has formed the starting point for much fruitful research ranging from ultra-cold atoms to cavity quantum electrodynamics. In fact, Jaynes-Cummings physics is at the very heart of the beautiful experiments by S Haroche and D Wineland, which recently earned them the 2012 Nobel Prize in physics. Indeed, as with most significant models in physics, the model is invoked in settings that go far beyond its initial framework. For example, recent investigations involving multi-level atoms, multiple atoms [3, 4], multiple electromagnetic modes, arrays of coupled cavities [5-7], and optomechanical systems [8] have further enriched the physics of the Jaynes-Cummings model. From the early interests in masers and the consistent quantum description of radiation and atom-photon interaction, the Jaynes-Cummings model has evolved into a cornerstone of quantum state engineering [9]. The authors of this editorial had not been born when Jaynes and Cummings wrote their remarkable paper. It is, therefore, a special honour for us to be able to draw the reader's attention to the accompanying reminiscence contributed by Frederick Cummings where he gives us a glimpse of the early history of the Jaynes-Cummings model from his perspective [11]. By now, the original 1963 paper by Jaynes and Cummings has gathered numerous citations and, at the time of writing, the number of articles involving Jaynes-Cummings physics is approaching 15 000.1 This special issue does not attempt to review this impressive wealth of research. The interested reader, however, is urged to consult the definitive article by Shore and Knight [10] for a comprehensive review of the first 30 years of Jaynes-Cummings physics. The collection of 26 papers presented in this issue, showcases a snapshot of some of the most recent and continuing research devoted to Jaynes-Cummings physics. We begin our special issue with Professor Cumming's recollections [11]. We then have six papers on quantum information aspects of the Jaynes-Cummings model [12-17]. The next topic includes seven papers on the Dicke and generalized Jaynes-Cummings models [18-24], followed by six papers on circuit QED, which is one of the most important experimental frameworks for Jaynes-Cummings systems [25-30]. Finally, we have six papers on the extension to many cavities, the Jaynes-Cummings-Hubbard model [31-36]. The snapshot of research captured in this special issue illustrates the unifying language provided by the Jaynes-Cummings model, tying together research in a number of subfields in physics. Jaynes-Cummings physics started with the diagonalization of a 2 × 2 matrix, as Frederick Cummings points out. There is no doubt that this elegance of simplicity will continue to guide exciting new research in the decades to come. References [1] Jaynes E T and Cummings F W 1963 Comparison of quantum and semiclassical radiation theories with application to the beam maser Proc. IEEE 51 89 [2] Shore B W and Knight P L 2004 Physics and Probability: Essays in Honor of Edwin T Jaynes (Cambridge: Cambridge University Press) [3] Tavis M and Cummings F W 1968 Exact solution for an N -molecule-radiation-field Hamiltonian Phys. Rev. 170 379-84 [4] Tavis M and Cummings F W 1969 Approximate solutions for an N -molecule-radiation-field Hamiltonian Phys. Rev. 188 692-5 [5] Hartmann M J, Brandão F G S L and Plenio M B 2006 Strongly interacting polaritons in coupled arrays of cavities Nature Phys. 2 849-55 [6] Greentree A D, Tahan C, Cole J H and Hollenberg L C L 2006 Quantum phase transitions of light Nature Phys. 2 856-61 [7] Angelakis D G, Santos M F and Bose S 2007 Photon-blockade-induced Mott transitions and XY spin models in coupled cavity arrays Phys. Rev. A 76 031805(R) [8] Schwab K C and Roukes M L 2005 Putting mechanics into quantum mechanics Phys. Today 58 36-42 [9] Blatt R, Milburn G J and Lvovksy A 2013 The 20th anniversary of quantum state engineering J. Phys. B: At. Mol. Opt. Phys. 46 100201 [10] Shore B and Knight P L 1993 The Jaynes-Cummings model J. Mod. Opt. 40 1195-238 [11] Cummings F W 2013 J. Phys. B: At. Mol. Opt. Phys. 46 220202 [12] Arenz C 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224001 [13] Quesada N 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224002 [14] Everitt M 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224003 [15] Kitajima S 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224004 [16] Groves E 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224005 [17] Bougouffa S 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224006 [18] Braak D 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224007 [19] Emary C 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224008 [20] Miroshnychenko Y 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224009 [21] Dombi A 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224010 [22] Tavis M 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224011 [23] Grimsmo A 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224012 [24] Stenholm S I 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224013 [25] Kockum A F 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224014 [26] Larson J 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224015 [27] Larson J 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224016 [28] Agarwal S 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224017 [29] Deng W-W 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224018 [30] Leppaekangas J 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224019 [31] Schmidt S 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224020 [32] Schiro M 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224021 [33] Susa C 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224022 [34] del Valle E 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224023 [35] Correa B V 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224024 [36] Schetakis N 2013 J. Phys. B: At. Mol. Opt. Phys. 46 224025 1Number estimate based on a Google Scholar search.

Control of cardiorespiratory function in response to hypoxia in an air-breathing fish, the African sharptooth catfish, Clarias gariepinus.

PubMed

Belão, T C; Zeraik, V M; Florindo, L H; Kalinin, A L; Leite, C A C; Rantin, F T

2015-09-01

We evaluated the role of the first pair of gill arches in the control of cardiorespiratory responses to normoxia and hypoxia in the air-breathing catfish, Clarias gariepinus. An intact group (IG) and an experimental group (EG, bilateral excision of first gill arch) were submitted to graded hypoxia, with and without access to air. The first pair of gill arches ablations reduced respiratory surface area and removed innervation by cranial nerve IX. In graded hypoxia without access to air, both groups displayed bradycardia and increased ventilatory stroke volume (VT), and the IG showed a significant increase in breathing frequency (fR). The EG exhibited very high fR in normoxia that did not increase further in hypoxia, this was linked to reduced O2 extraction from the ventilatory current (EO2) and a significantly higher critical O2 tension (PcO2) than the IG. In hypoxia with access to air, only the IG showed increased air-breathing, indicating that the first pair of gill arches excision severely attenuated air-breathing responses. Both groups exhibited bradycardia before and tachycardia after air-breaths. The fH and gill ventilation amplitude (VAMP) in the EG were overall higher than the IG. External and internal NaCN injections revealed that O2 chemoreceptors mediating ventilatory hypoxic responses (fR and VT) are internally oriented. The NaCN injections indicated that fR responses were mediated by receptors predominantly in the first pair of gill arches but VT responses by receptors on all gill arches. Receptors eliciting cardiac responses were both internally and externally oriented and distributed on all gill arches or extra-branchially. Air-breathing responses were predominantly mediated by receptors in the first pair of gill arches. In conclusion, the role of the first pair of gill arches is related to: (a) an elevated EO2 providing an adequate O2 uptake to maintain the aerobic metabolism during normoxia; (b) a significant bradycardia and increased fAB elicited by externally oriented O2 chemoreceptors; (c) increase in the ventilatory variables (fR and VAMP) stimulated by internally oriented O2 chemoreceptors. Copyright © 2015 Elsevier Inc. All rights reserved.

Computational analysis of hybrid Norwood circulation with distal aortic arch obstruction and reverse Blalock-Taussig shunt.

PubMed

Ceballos, Andres; Argueta-Morales, I Ricardo; Divo, Eduardo; Osorio, Ruben; Caldarone, Christopher A; Kassab, Alain J; Decampli, William M

2012-11-01

The hemodynamics characteristics of the hybrid Norwood (HN) procedure differ from those of the conventional Norwood and are not fully understood. We present a multiscale model of HN circulation to understand local hemodynamics and effects of aortic arch stenosis and a reverse Blalock-Taussig shunt (RBTS) on coronary and carotid perfusion. Four 3-dimensional models of four HN anatomic variants were developed, with and without 90% distal preductal arch stenosis and with and without a 4-mm RBTS. A lumped parameter model of the circulation was coupled to a local 3-dimensional computational fluid dynamics model. Outputs from the lumped parameter model provided waveform boundary conditions for the computational fluid dynamics model. A 90% distal arch stenosis reduced pressure and net flow-rate through the coronary and carotid arteries by 30%. Addition of the RBTS completely restored pressure and flow rate to baseline in these vessels. Zones of flow stagnation, flow reversal, and recirculation in the presence of stenosis were rendered more orderly by addition of the RBTS. In the absence of stenosis, presence of the shunt resulted in extensive zones of disturbed flow within the RBTS and arch. We found that a 4-mm × 21-mm RBTS completely compensated for the effects of a 90% discrete stenosis of the distal aortic arch in the HN. Placed preventatively, the RBTS and arch displayed zones with thrombogenic potential showing recirculation and stagnation that persist for a substantial fraction of the cardiac cycle, indicating that anticoagulation should be considered with a prophylactic RBTS. Copyright © 2012 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Shear and pressure under the first ray in neuropathic diabetic patients: Implications for support of the longitudinal arch.

PubMed

Davis, Brian; Crow, Mariam; Berki, Visar; Ciltea, Daniela

2017-02-08

To assess dynamic arch support in diabetic patients at risk for Charcot neuroarthopathy whose arch index has not yet shown overt signs of foot collapse. Two indirect measures of toe flexor activation (ratios: peak hallux pressure to peak metatarsal pressure - Ph/Pm; peak posterior hallux shear to peak posterior metatarsal shear - Sh/Sm) were obtained with a custom built system for measuring shear and pressure on the plantar surface of the foot during gait. In addition, the tendency of the longitudinal arch to flatten was measured by quantifying the difference in shear between the 1st metatarsal head and the heel (S flatten ) during the first half of the stance phase. Four stance phases from the same foot for 29 participants (16 control and 13 neuropathic diabetic) were assessed. The peak load ratio under the hallux (Ph/Pm) was significantly higher in the control group (2.10±1.08 versus 1.13±0.74, p=0.033). Similarly, Sh/Sm was significantly higher in the control group (1.87±0.88 versus 0.88±0.45, p=0.004). The difference in anterior shear under the first metatarsal head and posterior shear under the lateral heel (S flatten ) was significantly higher in the diabetic group (p<0.01). Together these findings demonstrate reduced plantar flexor activity in the musculature responsible for maintaining the longitudinal arch. With no significant difference in arch index between the two groups, but significant differences in Ph/Pm, Sh/Sm and S flatten the collective results suggest there are changes in muscle activity that precede arch collapse. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of section properties on load carrying capacity of 10m span precast concrete closed spandrel arch bridge with corrugated section

NASA Astrophysics Data System (ADS)

Ong, Chong Yong; Choong, Kok Keong; Miralimov, Mirzakhid

2017-10-01

Various precast concrete arch bridge systems have been developed since 1960's. The reinforced concrete section of these systems is solid rectangular which is not an efficient section. Inspired by the nature of banana tree trunk, a relatively new corrugated section of precast concrete arch bridge was introduced and patented in Malaysia in 2008. This folded plate section is an open section which tends to open under vehicular loading. Hence, effect of section properties on load carrying capacity of precast concrete closed spandrel arch bridge with corrugated section under vehicle loading is presented in this paper. The arch bridge model has a clear span of 10m with 2.5m, 3.0m and 3.5m clear rise. For the corrugated section dimension model, overall depth varies from 475mm to 575mm, top and bottom flange thickness varies from 135mm to 155mm and web thickness varies from 90mm to 120mm. Linear and non-linear computational analysis are carried out using 2D PLAXIS software (in longitudinal direction) and LUSAS software (in transverse direction). In longitudinal direction, the sagging moment in non-linear analysis increases approximately 18% compared to linear analysis for different rise span ratio. From the analysis results, as the rise of arch increases, the sagging moment and hogging moment increases, but the axial force decreases. Besides, as the overall depth of corrugated section increases, the internal forces of the arch also increase. In transverse direction, the maximum tensile stress of concrete at crown and haunch decreases as slenderness ratio increases.

Contemporary results of surgical repair of recurrent aortic arch obstruction.

PubMed

Mery, Carlos M; Khan, Muhammad S; Guzmán-Pruneda, Francisco A; Verm, Raymond; Umakanthan, Ramanan; Watrin, Carmen H; Adachi, Iki; Heinle, Jeffrey S; McKenzie, E Dean; Fraser, Charles D

2014-07-01

There is a paucity of data on the current outcomes of surgical intervention for recurrent aortic arch obstruction (RAAO) after initial aortic arch repair in children. The goal of this study is to report the long-term results in these patients. All patients undergoing surgical intervention for RAAO at Texas Children's Hospital from 1995 to 2012 were included. The cohort was divided into four groups based on initial procedure: (1) simple coarctation repair, (2) Norwood procedure, (3) complex congenital heart disease, and (4) interrupted aortic arch. A total of 48 patients age 9 months (range, 22 days to 36 years) underwent 49 procedures for RAAO. All patients had an anatomic repair consisting of either patch aortoplasty (n=27, 55%), aortic arch advancement (n=8, 16%), sliding arch aortoplasty (n=6, 12%), placement of an interposition graft (n=2, 17%), reconstruction with donor allograft (n=4, 8%), extended end-to-end anastomosis (n=1, 2%), or redo Norwood-type reconstruction (n=1, 2%). Most procedures (n=46, 94%) were performed through a median sternotomy using cardiopulmonary bypass. At a median follow-up of 6.1 years (range, 9 days to 17 years), only 2 patients required surgical or catheter-based intervention for RAAO. Hypertension was present in 10% of patients at last follow-up. There were no neurologic or renal complications. There was 1 perioperative death after an aortic arch advancement in group 1. Four other patients have died during follow-up, none of the deaths related to RAAO. Anatomic repair of RAAO is a safe procedure associated with low morbidity and mortality, and low long-term reintervention rates. Copyright © 2014 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Machine-learning phenotypic classification of bicuspid aortopathy.

PubMed

Wojnarski, Charles M; Roselli, Eric E; Idrees, Jay J; Zhu, Yuanjia; Carnes, Theresa A; Lowry, Ashley M; Collier, Patrick H; Griffin, Brian; Ehrlinger, John; Blackstone, Eugene H; Svensson, Lars G; Lytle, Bruce W

2018-02-01

Bicuspid aortic valves (BAV) are associated with incompletely characterized aortopathy. Our objectives were to identify distinct patterns of aortopathy using machine-learning methods and characterize their association with valve morphology and patient characteristics. We analyzed preoperative 3-dimensional computed tomography reconstructions for 656 patients with BAV undergoing ascending aorta surgery between January 2002 and January 2014. Unsupervised partitioning around medoids was used to cluster aortic dimensions. Group differences were identified using polytomous random forest analysis. Three distinct aneurysm phenotypes were identified: root (n = 83; 13%), with predominant dilatation at sinuses of Valsalva; ascending (n = 364; 55%), with supracoronary enlargement rarely extending past the brachiocephalic artery; and arch (n = 209; 32%), with aortic arch dilatation. The arch phenotype had the greatest association with right-noncoronary cusp fusion: 29%, versus 13% for ascending and 15% for root phenotypes (P < .0001). Severe valve regurgitation was most prevalent in root phenotype (57%), followed by ascending (34%) and arch phenotypes (25%; P < .0001). Aortic stenosis was most prevalent in arch phenotype (62%), followed by ascending (50%) and root phenotypes (28%; P < .0001). Patient age increased as the extent of aneurysm became more distal (root, 49 years; ascending, 53 years; arch, 57 years; P < .0001), and root phenotype was associated with greater male predominance compared with ascending and arch phenotypes (94%, 76%, and 70%, respectively; P < .0001). Phenotypes were visually recognizable with 94% accuracy. Three distinct phenotypes of bicuspid valve-associated aortopathy were identified using machine-learning methodology. Patient characteristics and valvular dysfunction vary by phenotype, suggesting that the location of aortic pathology may be related to the underlying pathophysiology of this disease. Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Effects of foot orthoses with medial arch support and lateral wedge on knee adduction moment in patients with medial knee osteoarthritis.

PubMed

Dessery, Yoann; Belzile, Étienne; Turmel, Sylvie; Corbeil, Philippe

2017-08-01

There is contradictory evidence regarding whether the addition of medial arch supports to laterally wedged insoles reduces knee adduction moment, improves comfort, and reduces knee pain during the late stance phase of gait. To verify if such effects occur in participants with medial knee osteoarthritis. Randomized single-blinded study. Gait analysis was performed on 18 patients affected by medial knee osteoarthritis. Pain and comfort scores, frontal plane kinematics and kinetics of ankle, knee, and hip were compared in four conditions: without foot orthosis, with foot orthoses, with medial arch support, and with foot orthoses with medial arch support and lateral wedge insoles with 6° and 10° inclination. Lower-extremity gait kinetics were characterized by a significant decrease, greater than 6%, in second peak knee adduction moment in laterally wedged insole conditions compared to the other conditions ( p < 0.001; effect size = 0.6). No significant difference in knee adduction moment was observed between laterally wedged insole conditions. In contrast, a significant increase of 7% in knee adduction moment during the loading response was observed in the customized foot orthoses without lateral inclination condition ( p < 0.001; effect size = 0.3). No difference was found in comfort or pain ratings between conditions. Our study suggests that customized foot orthoses with a medial arch support may only be suitable for the management of medial knee osteoarthritis when a lateral wedge is included. Clinical relevance Our data suggest that customized foot orthoses with medial arch support and a lateral wedge reduce knee loading in patients with medial knee osteoarthritis (KOA). We also found evidence that medial arch support may increase knee loading, which could potentially be detrimental in KOA patients.

Dental prosthetic status and prosthetic needs of institutionalised elderly population in oldage homes of jabalpur city, madhya pradesh, India.

PubMed

Deogade, Suryakant C; Vinay, S; Naidu, Sonal

2013-12-01

Oral disorders are cumulative throughout life and hence unfavourable outcomes are likely to be greatest among the elderly. A descriptive cross-sectional study was conducted among institutionalized geriatric population in old-age homes of Jabalpur city, Madhya Pradesh, to assess their prosthetic status and prosthetic needs. A cross-sectional survey was conducted in all the four old-age homes of Jabalpur city, Madhya Pradesh state, India. All residents aged 60 years and above formed the study population. The recording of prosthetic status and prosthetic needs was carried out according to the World Health Organisation (WHO) Oral Health Assessment Form (1997). A total of 224 individuals were included in the study of which 123 were females and 101 were males. Seventy five percent of the females and 55 % of the males had no prostheses in their upper arch and 61 % of the females and 76 % of the males had no prostheses in their lower arch. More number of males presented with 'Bridges' in their upper arch when compared to females (P value = 0.006). Highest prosthetic need in males was multi-unit prosthesis (42 % in upper arch and 41 % in lower arch) whereas, females' required full prosthesis (39 % in both the upper arch and lower arches). Ageing presents some formidable challenges, particularly with the institutionalised. This study clearly demonstrates a high insufficiency of prosthetic care among the institutionalized elderly population. Any preparation towards the provision of oral health care should not be limited to treatment alone but, more importantly focus on empowering this elderly community with information and education programmes.

Single center experience of aortic bypass graft for aortic arch obstruction in children.

PubMed

Shinkawa, Takeshi; Chipman, Carl; Holloway, Jessica; Tang, Xinyu; Gossett, Jeffrey M; Imamura, Michiaki

2017-01-01

The purpose of this study is to access the outcomes of aortic bypass graft placement in children. This is a retrospective review of all children having aortic bypass graft placement for aortic arch obstruction for the first time between 1982 and 2013 at a single institution. The actuarial survival and the freedom from aortic arch reoperation were calculated and compared between the groups. Seventy consecutive children underwent aortic bypass graft placements. The median age and body weight at the operation were 14 days and 3.6 kg. There were 7 early deaths, 6 late deaths, and 7 heart transplants during the median follow-up of 10.8 years (0.0-31.5 years). The actuarial transplant free survival was 64.7 % at 20 years and the freedom from aortic arch reoperation was 50.5 % at 10 years. Between the children younger than 1 year old and older than 1 year old, there were significant differences in actuarial transplant free survival (56.4 vs. 100 % at 15 years, p = 0.0042) and in the freedom from aortic arch reoperation (18.7 vs. 100 % at 10 years, p < 0.001). The children who received aortic bypass graft larger than 16 mm in size had no aortic arch reoperation at 15 years. The aortic bypass graft placement for aortic arch obstruction can be done with low mortality and morbidity for children who can receive bypass graft larger than 16 mm in size. However, it should be avoided for the neonates and infants except selected situations.

Pain and discomfort experienced after placement of a conventional or a superelastic NiTi aligning archwire. A randomized clinical trial.

PubMed

Fernandes, L M; Ogaard, B; Skoglund, L

1998-01-01

Two nickel-titanium arch-wire types commonly used for initial tooth alignment were compared with regard to the pain/discomfort patients experience during the initial phase of tooth movement. The two arch wires used were a superelastic nickel-titanium alloy, 0.014 inch Sentalloy, Light (GAC International Inc. Central Islip, NY, USA) and a 0.014 inch Nitinol (Unitek, Monrovia, CA, USA), a conventional nickel-titanium aligning archwire. One hundred and twenty-eight consecutive patients attending an orthodontic university clinic and 2 private practices for routine placement of a fixed appliance were randomly assigned one of these 2 initial arch wires. Assessments of pain/discomfort were made daily by means of a 100 mm visual analog scale (VAS) over the first 7-day period after bonding. On the first day, recordings were made every hour for the first 11 hours. The results showed that the level of discomfort increased continuously every hour after the insertion of either a Sentalloy or a Nitinol as first arch wires, with a peak in the first night, remaining high on the second day and decreasing thereafter to baseline level after 7 days. During the first 10 hours it was apparent that the pain/discomfort experienced after placement of a Sentalloy was less than that found with the Nitinol archwire, although a significant difference could be found at 4 hours only. No significant gender-specific differences were found in either archwire group. A significant difference between the upper and lower dental arches was observed during the first 11 hours after placement of either a Sentalloy or a Nitinol arch wire, with the lower arch having the higher pain experience.

The influence of the lateral pharyngeal wall anatomy on snoring and sleep apnoea.

PubMed

Korhan, Ibrahim; Gode, Sercan; Midilli, Rasit; Basoglu, Ozen Kacmaz

2015-02-01

To elucidate the variations of the lateral pharyngeal wall anatomy on physical examination and to assess the clinical importance of the examination of the lateral pharyngeal wall on the presence and severity of obstructive sleep apnoea syndrome. The cross-sectional study was conducted at Ege University Medical School, Izmir, Turkey, between May 2010 and April 2011. The patients were divided into four equal groups: Group 1--snoring without apnoea (age 20-40); Group 2--snoring without apnoea (age 40-60); Group 3--apnoea-hypopnoea index < 5/hr; Group 4: apnoea-hypopnoea index > 30/hr. Calibrated oropharynx pictures were taken. Distance between palatoglossal and palatopharyngeal arches, height of palatoglossal and palatopharyngeal arches, uvula width, uvula length and distance between tonsils were measured. SPSS 17 was used for statistical analysis. Of the 80 patients in the study, 44 (55%) were men. Mean distance between palatopharyngeal and palatoglossal arches were 1.55 ± 0.34 cm and 2.70 ± 0.43 cm respectively. Mean height of palatopharyngeal and palatoglossal arches were 0.60 ± 0.21 cm and 1.37 ± 0.36 cm respectively (p > 0.05). Mean uvula width and uvula length were 0.80 ± 0.12cm and 1.25 ± 0.27 cm respectively (p > 0.05). Mean distance between tonsils was 2.24 ± 0.56 cm (p > 0.05). Distance between palatopharyngeal arches was significantly different between groups 3 and 4 (p < 0.05). Palatopharyngeal arch anatomy was found to be significantly associated with obstructive sleep apnoea syndrome severity, especially in patients with normal or small tonsil size. Patients with the palatopharyngeal arches, which narrow the oropharyngeal inlet more than the tonsils, should further be investigated with polysomnography.

The influence of bracket design on frictional losses in the bracket/arch wire system.

PubMed

Schumacher, H A; Bourauel, C; Drescher, D

1999-01-01

In arch guided tooth movement, the essential role played by bracket configuration with respect to sliding friction has been recognized by the manufacturers, a fact which has had an increasing impact on the design and marketing of new bracket models in recent years. The aim of the present in-vitro study was to investigate the influence of different bracket designs on sliding mechanics. Five differently shaped stainless steel brackets (Discovery: Dentaurum, Damon SL: A-Company, Synergy: Rocky Mountain Orthodontics, Viazis bracket and Omni Arch appliance: GAC) were compared in the 0.022"-slot system. The Orthodontic Measurement and Simulation System (OMSS) was used to quantify the difference between applied force (NiTi coil spring, 1.0 N) and orthodontically effective force and to determine leveling losses occurring during the sliding process in arch guided tooth movement. Simulated canine retraction was performed using continuous arch wires with the dimensions 0.019" x 0.025" (Standard Steel, Unitek) and 0.020" x 0.020" (Ideal Gold, GAC). Comparison of the brackets revealed friction-induced losses ranging from 20 to 70%, with clear-cut advantages resulting from the newly developed bracket types. However, an increased tendency towards leveling losses in terms of distal rotation (maximum 15 degrees) or buccal root torque (maximum 20 degrees) was recorded, especially with those brackets giving the arch wire increased mobility due to their shaping or lack of ligature wire.

Histone deacetylase 1 and 2 are essential for murine neural crest proliferation, pharyngeal arch development, and craniofacial morphogenesis.

PubMed

Milstone, Zachary J; Lawson, Grace; Trivedi, Chinmay M

2017-12-01

Craniofacial anomalies involve defective pharyngeal arch development and neural crest function. Copy number variation at 1p35, containing histone deacetylase 1 (Hdac1), or 6q21-22, containing Hdac2, are implicated in patients with craniofacial defects, suggesting an important role in guiding neural crest development. However, the roles of Hdac1 and Hdac2 within neural crest cells remain unknown. The neural crest and its derivatives express both Hdac1 and Hdac2 during early murine development. Ablation of Hdac1 and Hdac2 within murine neural crest progenitor cells cause severe hemorrhage, atrophic pharyngeal arches, defective head morphogenesis, and complete embryonic lethality. Embryos lacking Hdac1 and Hdac2 in the neural crest exhibit decreased proliferation and increased apoptosis in both the neural tube and the first pharyngeal arch. Mechanistically, loss of Hdac1 and Hdac2 upregulates cyclin-dependent kinase inhibitors Cdkn1a, Cdkn1b, Cdkn1c, Cdkn2b, Cdkn2c, and Tp53 within the first pharyngeal arch. Our results show that Hdac1 and Hdac2 function redundantly within the neural crest to regulate proliferation and the development of the pharyngeal arches by means of repression of cyclin-dependent kinase inhibitors. Developmental Dynamics 246:1015-1026, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Body surface area as a key determinant of aortic root and arch dimensions in a population-based study.

PubMed

Wang, Yan-Li; Wang, Qing-Ling; Wang, Liang; Wu, Ying-Biao; Wang, Zhi-Bin; Cameron, James; Liang, Yu-Lu

2013-02-01

The associations between the aortic dimensions (of the aortic sinus, aortic annulus and aortic arch) and physiological variables have not been established in the Chinese population. The present study examined the associations among physiological variables to determine the aortic root and arch dimensions echocardiographically. The diameters of the aortic sinus, annulus and arch were measured in 1,010 subjects via 2-D echocardiography with a 3.5-MHz transducer in a trans-thoracic position. The images of the aortic sinus and aortic annulus were obtained from a standard parasternal long-axis view. The maximum diameter of the valve orifice was measured at the end of systole. The aortic arch dimension was visualized in the long-axis using a suprasternal notch window and the maximum transverse diameter was measured. Epidata 3.0, Excel 2007 and SPSS version 17.0 were used to collect and analyze the data. A total of 1,010 subjects were enrolled. The mean age was 55.0±17.0 years (range of 18 to 90 years). The body surface area (BSA) was the best predictor of all the studied physiological variables and may be used to predict aortic sinus, annulus and arch dimensions independently (r=0.54, 0.37 and 0.39, respectively). Gender, blood pressure, age and BSA are significant predictors of the aortic dimensions. Of these, BSA was the best predictor.

Design and application of hybrid maxillomandibular fixation for facial bone fractures.

PubMed

Park, Kang-Nam; Oh, Seung-Min; Lee, Chang-Youn; Kim, Jwa-Young; Yang, Byoung-Eun

2013-01-01

A novel maxillomandibular fixation (MMF) procedure using a skeletal anchorage screw (SAS) (in the maxilla) and an arch bar (in the mandible), which we call "hybrid maxillomandibular fixation," was explored in this study. The aims of the study were to examine the efficacy of our hybrid MMF method and to compare periodontal tissue health and occlusal rehabilitation among 3 MMF methods. In total, 112 patients who had undergone open reduction at the Department of Oral and Maxillofacial Surgery between September 2005 and December 2012 were selected for this study. The participants were assigned to one of the following groups: SAS (maxilla), SAS (mandible), SAS-arch bar, or arch bar-arch bar. Periodontal health was evaluated using the Gingival Index, and the perioperative occlusal reproducibility was evaluated using a score of 1 to 3. Statistical analysis was performed using parametric tests (Student t test or 1-way analysis of variance followed by post hoc Tukey test). In the Gingival Index comparison performed 1 month after the surgery, only the group using the arch bars and wiring was significantly different from the other groups (P < 0.05). The occlusal reproducibility scores were not significantly different. The pain and discomfort of the patients were reduced in the hybrid MMF group. The hybrid MMF takes advantage of MMF using both arch bars and SASs for mandibular fractures. In addition, it overcomes many problems presented by previous MMF methods.

[Function of the acetabulum of digenetic trematodes, as exemplified by Dicrocoelium dendriticum].

PubMed

Neuhaus, W

1985-01-01

The suckers of animals adhere to the substratum either in air or in aqueous fluids. The varying compressibility of these media causes differences in function, the principles of which are described. The ventral arch of the acetabulum of Dicrocoelium dendriticum, like the remaining body, is limited by the integument, basal lamina and skin muscles. The dorsal arch covers a basal lamina, which is close to a plexus of diagonal, longitudinal and circular muscles. The radical muscles, attached at the ventral basal lamina by thin connective tissue, continue in relatively thick contractile fibers, which split up into several fibrils, which also attached by thin connective tissue at the dorsal basal lamina. In this way the tension of the muscles is likewise distributed over the dorsal and ventral arches of the acetabulum. After contact with the substratum the sucker creates a partial vacuum and attachment by means of the pressure of the radial muscles against the wall of the hole. Because of the fluid content of the hole, the volume does not change much. The dorsal arch of the sucker withstands the pressure of the radical muscles, because its surface area is six times greater than that of the ventral arch and consequently the load is six times less. The sucker, covered with basal lamina, has a constant volume; its layer of muscles resists deformation and supports the stability of the arch.

Dental arch dimensional changes after adenotonsillectomy in prepubertal children.

PubMed

Petraccone Caixeta, Anna Cristina; Andrade, Ildeu; Bahia Junqueira Pereira, Tatiana; Franco, Letícia Paiva; Becker, Helena Maria Gonçalves; Souki, Bernardo Quiroga

2014-04-01

The purposes of this study were to investigate the dental arch changes after adenotonsillectomies in prepubertal children and to compare the dental arch dimensions of mouth-breathing and nasal-breathing children. The sample included 49 prepubertal severely obstructed mouth-breathing children and 46 prepubertal nasal-breathing children. Twenty-four of the 49 mouth-breathing children had an adenotonsillectomy and composed the adenotonsillectomy subgroup. The 25 children in whom the mouth-breathing pattern was unchanged during the 1-year study period composed the control subgroup. The mouth-breathing children showed a deeper palatal vault, a larger mandibular width, and a larger mandibular arch length in comparison with the nasal-breathing children. After airway clearance, the adenotonsillectomy group showed a significant maxillary transverse width gain compared with the control subgroup. The control subgroup showed a significant deepening of the palatal height when compared with the adenotonsillectomy subgroup after 1 year. The adenotonsillectomy subgroup had a significantly different pattern of arch development compared with the untreated controls. After adenotonsillectomy, the mouth-breathing children showed greater maxillary transverse development than did the controls. The palatal vault deepened in the untreated children. The mouth-breathing children showed a deeper palatal vault, a larger mandibular width, and a larger mandibular arch length in comparison with the nasal-breathing children. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Applicability of the Tanaka-Johnston and Moyers mixed dentition analyses in Northeast Han Chinese.

PubMed

Sherpa, Jangbu; Sah, Gopal; Rong, Zeng; Wu, Lipeng

2015-06-01

To assess applicability of the Tanaka-Johnston and Moyers prediction methods in a Han ethnic group from Northeast China and to develop prediction equations for this same population. Cross-sectional study. Department of Orthodontics, School of Stomatology, Jiamusi University, Heilongjiang, China. A total of 130 subjects (65 male and 65 female) aged 16-21 years from a Han ethnic group of Northeast China were recruited from dental students and patients seeking orthodontic treatment. Ethnicity was verified by questionnaire. Mesio-distal tooth width was measured using Digital Vernier calipers. Predicted values were obtained from the Tanaka-Johnston and Moyers methods in both arches were compared with the actual measured widths. Based on regression analysis, prediction equations were developed. Tanaka-Johnston equations were not precise, except for the upper arch in males. However, the Moyers 85th percentile in the upper arch and 75th percentile in the lower arch predicted the sum precisely in males. For females, the Moyers 75th percentile predicted the sum precisely for the upper arch, but none of the Moyers percentiles predicted in the lower arch. Both the Tanaka-Johnston and Moyers method may not be applied universally without question. Hence, it may be safer to develop regression equations for specific populations. Validating studies must be conducted to confirm the precision of these newly developed regression equations.

Detection of orthopaedic implants by airport metal detectors.

PubMed

Obremskey, William T; Austin, Tom; Crosby, Colin; Driver, Robin; Kurtz, Will; Shuler, Franklin; Kregor, Philip

2007-02-01

To report the effect of patient's body mass index (BMI), implant type, size, location, number, and material on detection by certified Transportation Security Administration (TSA) and Federal Aviation Administration (FAA) airport metal detectors set to today's standard sensitivity. Retrospective clinical study. Level 1 university trauma center. Ninety-six regularly scheduled trauma clinic patients with a wide variety of orthopaedic implants were enrolled in the study from August 2004 through December 2004. Patients walked through an airport arch metal detector and were also wanded with a handheld metal detector. Detection of implants by arch detector or wand was recorded. We also gathered information regarding BMI, location of implants, type, metal composition, and size. All unilateral prostheses (8/8) and bilateral prostheses (1/1) were detected. Subjects with 4 or fewer screws and no other implants were never detected by the arch metal detector (0/7). For the remaining 78 subjects, the 2 best predictors of detection by the arch were having plates of length >10 holes and having titanium nails (P < 0.001 for each predictor, Wald's test for effects in a logistic model). Prostheses, plates of length >10 holes, and titanium nails were the best predictors of detection by the arch. These 3 factors accounted for 42 of the 43 detections by the arch. Body mass index was not shown to affect detectability of orthopaedic implants.

Foreland uplift during flat subduction: Insights from the Peruvian Andes and Fitzcarrald Arch

NASA Astrophysics Data System (ADS)

Bishop, Brandon T.; Beck, Susan L.; Zandt, George; Wagner, Lara S.; Long, Maureen D.; Tavera, Hernando

2018-04-01

Foreland deformation has long been associated with flat-slab subduction, but the precise mechanism linking these two processes remains unclear. One example of foreland deformation corresponding in space and time to flat subduction is the Fitzcarrald Arch, a broad NE-SW trending topographically high feature covering an area of >4 × 105 km2 in the Peruvian Andean foreland. Recent imaging of the southern segment of Peruvian flat slab shows that the shallowest part of the slab, which corresponds to the subducted Nazca Ridge northeast of the present intersection of the ridge and the Peruvian trench, extends up to and partly under the southwestern edge of the arch. Here, we evaluate models for the formation of this foreland arch and find that a basal-shear model is most consistent with observations. We calculate that 5 km of lower crustal thickening would be sufficient to generate the arch's uplift since the late Miocene. This magnitude is consistent with prior observations of unusually thickened crust in the Andes immediately south of the subducted ridge that may also have been induced by flat subduction. This suggests that the Fitzcarrald Arch's formation by the Nazca Ridge may be one of the clearest examples of upper plate deformation induced through basal shear observed in a flat-slab subduction setting. We then explore the more general implications of our results for understanding deformation above flat slabs in the geologic past.

66. CORBELS, BLIND ARCHES & SHIELDS, COMMONS EAST WALL, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

66. CORBELS, BLIND ARCHES & SHIELDS, COMMONS EAST WALL, LOOKING EAST - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

Overhead spine arch analysis of dairy cows from three-dimensional video

NASA Astrophysics Data System (ADS)

Abdul Jabbar, K.; Hansen, M. F.; Smith, M. L.; Smith, L. N.

2017-02-01

We present a spine arch analysis method in dairy cows using overhead 3D video data. This method is aimed for early stage lameness detection. That is important in order to allow early treatment; and thus, reduce the animal suffering and minimize the high forecasted financial losses, caused by lameness. Our physical data collection setup is non-intrusive, covert and designed to allow full automation; therefore, it could be implemented on a large scale or daily basis with high accuracy. We track the animal's spine using shape index and curvedness measure from the 3D surface as she walks freely under the 3D camera. Our spinal analysis focuses on the thoracic vertebrae region, where we found most of the arching caused by lameness. A cubic polynomial is fitted to analyze the arch and estimate the locomotion soundness. We have found more accurate results by eliminating the regular neck/head movements' effect from the arch. Using 22-cow data set, we are able to achieve an early stage lameness detection accuracy of 95.4%.

Class II malocclusion with complex problems treated with a novel combination of lingual orthodontic appliances and lingual arches.

PubMed

Yanagita, Takeshi; Nakamura, Masahiro; Kawanabe, Noriaki; Yamashiro, Takashi

2014-07-01

This case report describes a novel method of combining lingual appliances and lingual arches to control horizontal problems. The patient, who was 25 years of age at her first visit to our hospital with a chief complaint of crooked anterior teeth, was diagnosed with skeletal Class II and Angle Class II malocclusion with anterior deep bite, lateral open bite, premolar crossbite, and severe crowding in both arches. She was treated with premolar extractions and temporary anchorage devices. Conventionally, it is ideal to use labial brackets simultaneously with appliances, such as a lingual arch, a quad-helix, or a rapid expansion appliance, in patients with complex problems requiring horizontal, anteroposterior, and vertical control; however, this patient strongly requested orthodontic treatment with lingual appliances. A limitation of lingual appliances is that they cannot be used with other conventional appliances. In this report, we present the successful orthodontic treatment of a complex problem using modified lingual appliances that enabled combined use of a conventional lingual arch. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Fgfr1 regulates patterning of the pharyngeal region

PubMed Central

Trokovic, Nina; Trokovic, Ras; Mai, Petra; Partanen, Juha

2003-01-01

Development of the pharyngeal region depends on the interaction and integration of different cell populations, including surface ectoderm, foregut endoderm, paraxial mesoderm, and neural crest. Mice homozygous for a hypomorphic allele of Fgfr1 have craniofacial defects, some of which appeared to result from a failure in the early development of the second branchial arch. A stream of neural crest cells was found to originate from the rhombomere 4 region and migrate toward the second branchial arch in the mutants. Neural crest cells mostly failed to enter the second arch, however, but accumulated in a region proximal to it. Both rescue of the hypomorphic Fgfr1 allele and inactivation of a conditional Fgfr1 allele specifically in neural crest cells indicated that Fgfr1 regulates the entry of neural crest cells into the second branchial arch non-cell-autonomously. Gene expression in the pharyngeal ectoderm overlying the developing second branchial arch was affected in the hypomorphic Fgfr1 mutants at a stage prior to neural crest entry. Our results indicate that Fgfr1 patterns the pharyngeal region to create a permissive environment for neural crest cell migration. PMID:12514106

Saccular aortic aneurysm that resembled a mediastinal neoplasm

PubMed Central

Nose, Naohiro; Kataoka, Hiroumi; Hamada, Masakatsu; Kosako, Yukio; Matsuno, Yasuji; Ishii, Takahiro

2012-01-01

INTRODUCTION Saccular aortic arch aneurysms in unusual sites may be misdiagnosed as a neoplasm. We present the case of a rare saccular aortic arch aneurysm between trachea and esophagus that resembled a mediastinal neoplasm in the preoperative findings. PRESENTATION OF CASE A 63-year-old male with an abnormal mediastinal shadow on chest X-ray was referred to the hospital. An axial plain computed tomogram of the chest revealed mediastinal soft tissue next to the right side of the aortic arch resembling a neoplasm originating from the gap between the trachea and the esophagus. The coronal view constructed by enhanced 64-row multi detector computed tomography revealed the soft tissue was an aneurysm arising from the inner side of the aortic arch. An aortic arch replacement was performed via a median sternotomy. DISCUSSION A thoracic aortic aneurysm sometimes behaves like a mediastinal neoplasm. The multiple cross-sectional image from multidetector computed tomography was useful for the correct diagnosis of such an aneurysm. CONCLUSION The possibility of an aneurysm should be considered whenever a mass in contact with the aortic wall is identified. PMID:22995656

The impact of foot arch height on quality of life in 6-12 year olds.

PubMed

López López, Daniel; Bouza Prego, M de Los Ángeles; Requeijo Constenla, Ana; Saleta Canosa, Jesús Luis; Bautista Casasnovas, Adolfo; Tajes, Francisco Alonso

2014-01-01

To determine whether arch height has an effect on the health-related quality of life of schoolchildren. One hundred and thirteen schoolchildren attended an out-patient centre where self-reported data were recorded, their feet were classified into one of three groups according to their arch index (high, normal or low) and the scores obtained from the Foot Health Status Questionnaire (FHSQ - Spanish version) were compared. The groups with high, low and normal arch recorded lower scores in Section One for the general foot health and footwear domains and higher scores in foot pain and foot function. In Section Two they obtained lower scores in general health and higher scores in physical activity, social capacity and vigour. Comparison of the scores obtained reveals that arch height has a negative impact on quality of life. Given the limited extent of available evidence in respect of the aetiology and treatment of foot diseases and deformities, these findings reveal the need to implement programmes to promote foot health and carry out further research into this commonly occurring disabling condition.

How to Perfuse: Concepts of Cerebral Protection during Arch Replacement

PubMed Central

Habertheuer, Andreas; Wiedemann, Dominik; Kocher, Alfred; Laufer, Guenther; Vallabhajosyula, Prashanth

2015-01-01

Arch surgery remains undoubtedly among the most technically and strategically challenging endeavors in cardiovascular surgery. Surgical interventions of thoracic aneurysms involving the aortic arch require complete circulatory arrest in deep hypothermia (DHCA) or elaborate cerebral perfusion strategies with varying degrees of hypothermia to achieve satisfactory protection of the brain from ischemic insults, that is, unilateral/bilateral antegrade cerebral perfusion (ACP) and retrograde cerebral perfusion (RCP). Despite sophisticated and increasingly individualized surgical approaches for complex aortic pathologies, there remains a lack of consensus regarding the optimal method of cerebral protection and circulatory management during the time of arch exclusion. Many recent studies argue in favor of ACP with various degrees of hypothermic arrest during arch reconstruction and its advantages have been widely demonstrated. In fact ACP with more moderate degrees of hypothermia represents a paradigm shift in the cardiac surgery community and is widely adopted as an emergent strategy; however, many centers continue to report good results using other perfusion strategies. Amidst this important discussion we review currently available surgical strategies of cerebral protection management and compare the results of recent European multicenter and single-center data. PMID:26713319

Inactivation of Bmp4 from the Tbx1 Expression Domain Causes Abnormal Pharyngeal Arch Artery and Cardiac Outflow Tract Remodeling

PubMed Central

Nie, Xuguang; Brown, Christopher B.; Wang, Qin; Jiao, Kai

2011-01-01

Maldevelopment of outflow tract and aortic arch arteries is among the most common forms of human congenital heart diseases. Both Bmp4 and Tbx1 are known to play critical roles during cardiovascular development. Expression of these two genes partially overlaps in pharyngeal arch areas in mouse embryos. In this study, we applied a conditional gene inactivation approach to test the hypothesis that Bmp4 expressed from the Tbx1 expression domain plays a critical role for normal development of outflow tract and pharyngeal arch arteries. We showed that inactivation of Bmp4 from Tbx1-expressing cells leads to the spectrum of deformities resembling the cardiovascular defects observed in human DiGeorge syndrome patients. Inactivation of Bmp4 from the Tbx1 expression domain did not cause patterning defects, but affected remodeling of outflow tract and pharyngeal arch arteries. Our further examination revealed that Bmp4 is required for normal recruitment/differentiation of smooth muscle cells surrounding the PAA4 and survival of outflow tract cushion mesenchymal cells. PMID:21123999

One-stage closure of isolated cleft palate with the Veau-Wardill-Kilner V to Y pushback procedure or the Cronin modification. II. Height, weight and comparison of dental arches.

PubMed

Heliövaara, A; Pere, A; Ranta, R

1994-03-01

The body height and weight, and sizes of dental arches in 116 patients with isolated cleft palate were evaluated at 16.9-20.6 years of age. One-stage closure of the soft and hard palate had been done at a mean age of 1.8 years using the Veau-Wardill-Kilner or the Cronin mucoperiosteal palatal V-Y pushback technique. The height attained in both the boys (177.6 cm) and the girls (165.7 cm) was similar to that in the general adult population, even though half of the boys had not reached their final height. The median relative weight for height and sex was 6%. There were no significant differences in dental arch measurements depending on the method of operation but the more palatal operations done the shorter the maxillary and mandibular dental arch widths. The extent of cleft made a significant difference, larger clefts having narrower palatal intercanine widths. Dental arch dimensions were consistently larger in boys than in girls.

Oesophageal foreign body and a double aortic arch: rare dual pathology.

PubMed

O'Connor, T E; Cooney, T

2009-12-01

We report the rare case of an oesophageal foreign body which lodged above the site of oesophageal compression by a double aortic arch. Case report and a review of the literature surrounding the classification, embryology, diagnosis and management of vascular rings and slings. An eight-month-old male infant presented with symptoms of tracheal compression following ingestion of an oesophageal foreign body. Following removal of the oesophageal foreign body, the infant's symptoms improved initially. However, subsequent recurrence of respiratory symptoms lead to a repeat bronchoscopy and the diagnosis of a coexisting double aortic arch, causing tracheal and oesophageal compression. To our knowledge, this is only the second reported case of a double aortic arch being diagnosed in a patient following removal of an oesophageal foreign body.

Design automation of load-bearing arched structures of roofs of tall buildings

NASA Astrophysics Data System (ADS)

Kulikov, Vladimir

2018-03-01

The article considers aspects of the possible use of arched roofs in the construction of skyscrapers. Tall buildings experience large load from various environmental factors. Skyscrapers are subject to various and complex types of deformation of its structural elements. The paper discusses issues related to the aerodynamics of various structural elements of tall buildings. The technique of solving systems of equations state method of Simpson. The article describes the optimization of geometric parameters of bearing elements of the arched roofs of skyscrapers.

Temporalis myofascial flap transfer into the oral cavity without zygomatic arch osteotomy

PubMed Central

Tauro, David P.; Mishra, Madan; Singh, Gaurav

2013-01-01

Among plethora of options, the temporalis myofascial flap remains a workhorse for the maxillofacial reconstruction. The inherent advantages include reliable vascularity, adequate size, and proximity to the defect. Although contemporary surgical techniques provide fair surgical results with low rate of complications, their intraoral transposition involve additional surgical trauma by intentional fracturing of the zygomatic arch. We have proposed herein a simpler technique of temporalis myofascial flap transposition into the oral cavity without zygomatic arch osteotomy. PMID:24665182

[Intraparotid first branchial arch cyst: complex diagnostic and therapeutic process].

PubMed

Gilabert Rodríguez, R; Berenguer, B; González Meli, B; Marín Molina, C; de Tomás Palacios, E; Buitrago Weiland, G; Aguado del Hoyo, A

2013-01-01

First branchial arch cysts are uncommon. Therefore, together with its variable clinical and age presentation they are often misdiagnosed at first. The treatment is surgical, requiring a correct procedure to avoid future recurrences. In this paper we describe a typical case of first branchial arch cyst in which as described in other reports, we first made several misdiagnoses and therefore an inadequate treatment and lastly, with the correct diagnosis, we performed a meticulous complete excision under facial nerve monitoring.

Integrated Design and Production Reference Integration with ArchGenXML V1.00

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barter, R H

2004-07-20

ArchGenXML is a tool that allows easy creation of Zope products through the use of Archetypes. The Integrated Design and Production Reference (IDPR) should be highly configurable in order to meet the needs of a diverse engineering community. Ease of configuration is key to the success of IDPR. The purpose of this paper is to describe a method of using a UML diagram editor to configure IDPR through ArchGenXML and Archetypes.

Persistent truncus arteriosis associated with interruption of the aortic arch.

PubMed

Nath, P H; Zollikofer, C; Castaneda-Zuniga, W; Formanek, A; Amplatz, K

1980-09-01

Five patients with a combination of truncus arteriosus and interruption of the aortic arch are reported. The combination of those defects significantly increases the surgical risk. This rare cardiac malformation can only be diagnosed radiographically. An aberrant right subclavian artery is present in 25% of patients. It is helpful in suspecting the diagnosis from plain films of the chest. The diagnosis can be made from a ventriculogram, but usually a truncogram is necessary to define the anatomy of the aortic arch.

Complex branchial fistula: a variant arch anomaly.

PubMed

De Caluwé, D; Hayes, R; McDermott, M; Corbally, M T

2001-07-01

A 5-year-old boy presented with an infected left-sided branchial fistula. Despite antibiotic treatment and repeated excision of the fistula, purulent discharge from the wound persisted. Three-dimensional computed tomography (3D CT) reconstruction greatly facilitated the diagnosis and management of this case by showing the course of the fistulous tract. The complexity of the tract suggests that this represents a variant arch anomaly because it contains features of first, second, third, and fourth arch remnants. Copyright 2001 by W.B. Saunders Company.

A Comparison of Arch Width with Angle Classification and Wits Appraisal in Class 2 Division 1 and Class 1 Individuals.

DTIC Science & Technology

1983-05-01

longitudinal changes in arch width between lateral incisors, canines and second premolars or deciduous second molars at four stages of dental eruption in 22 male... dental arch or skeletal widths. Also, he made no attempt to divide his sample into normal and malocclusion groups. -J 7 Warren (1959) studying twenty...buccal crossbite of the posterior teeth Many clinicians believe that this problem is highly correlated with tfte type or classification of malocclusion

Arterial supply of the thumb: Systemic review.

PubMed

Miletin, J; Sukop, A; Baca, V; Kachlik, D

2017-10-01

We offer a complete systemic review of the anatomy of arteries of the thumb, including their sources in the first web space. Eleven studies were selected from the PubMed, Medline, Embase, Scopus and Ovid databases. Data about each artery of the thumb were obtained; in particular, the incidence and dominance of each of these arteries were calculated. The ulnopalmar digital artery of the thumb (UPDAT) was found in 99.63%, the radiopalmar digital artery of the thumb (RPDAT) in 99.26%, the ulnodorsal digital artery of the thumb (UDDAT) in 83.39%, and the radiodorsal digital artery of the thumb (RDDAT) in 70.38%. The sources for the thumb arteries are the first palmar metacarpal artery (for UPDAT in 63.15%, for RPDAT in 78.88%, for UDDAT in 56.95% and for RDDAT in 41.48%), the first dorsal metacarpal artery (for UPDAT in 20.54%, for RPDAT 2.53%, for UDDAT in 20.62%, and for RDDAT in 4.81%) and the superficial palmar arch, either complete or incomplete (for UPDAT in 25.57%, for RPDAT in 23.04%, for UDDAT in 0%, and for RDDAT in 5.19%). The dominant source could be identified in 88.2% of cases: the first palmar metacarpal artery (66.2%), the first dorsal metacarpal artery (15.5%) and the superficial palmar arch, complete or incomplete (8.2%). Four arteries usually supply the thumb. Any artery in the first web space can be a source for the thumb arteries. We propose a new classification of the arteries of the hand, dividing them into three systems (superficial palmar, deep palmar and dorsal system), and suggest that the term "princeps pollicis artery" be reconsidered and systemic anatomical terms of the thumb arteries preferred. Clin. Anat. 30:963-973, 2017. ©2017 Wiley-Liss, Inc. © 2017 Wiley Periodicals, Inc.

Beyond detection: biological physics informing progression and treatment of cancer Beyond detection: biological physics informing progression and treatment of cancer

NASA Astrophysics Data System (ADS)

Newman, T. J.; Thompson, A. M.

2012-12-01

The full text of the Preface is given in the PDF file. References [1] Kaur P et al 2012 Phys. Biol. 9 065001 [2] Lobikin M et al 2012 Phys. Biol. 9 065002 [3] Tanner K 2012 Phys. Biol. 9 065003 [4] Liu S V et al 2012 Phys. Biol. 9 065004 [5] Liao D et al 2012 Phys. Biol. 9 065005 [6] Liao D et al 2012 Phys. Biol. 9 065006 [7] Orlando P A et al 2012 Phys. Biol. 9 065007

22. STEEL ARCH SEGMENT AND VENT IN OFFICE, ROOM 2351, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. STEEL ARCH SEGMENT AND VENT IN OFFICE, ROOM 2351, SECOND FLOOR, NORTH SIDE. - Hughes Aircraft Company, Processing & Electronics Building, 6775 Centinela Avenue, Los Angeles, Los Angeles County, CA

3. DEADWOOD CREEK BRIDGE, VIEW BELOW DECK SHOWING OPEN SPANDREL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. DEADWOOD CREEK BRIDGE, VIEW BELOW DECK SHOWING OPEN SPANDREL ARCH CONSTRUCTION AND ARCH RIBS - Deadwood Creek Bridge, Spanning Deadwood Creek on Mather Memorial Parkway, Longmire, Pierce County, WA