16 CFR 1302.1 - Scope and application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF... Product Safety Commission (Commission) declares extremely flammable contact adhesives and similar liquid or semiliquid consumer products to be banned hazardous products under sections 8 and 9 of the...

Oral liquid levothyroxine treatment at breakfast: a mistake?

PubMed

Cappelli, Carlo; Pirola, Ilenia; Gandossi, Elena; Formenti, Annamaria; Castellano, Maurizio

2014-01-01

Taking levothyroxine (L-T₄) with coffee or with water followed by coffee intake within a few minutes results in poor TSH response in many patients. T₄ is available in tablet form worldwide, but novel formulations in soft gel capsule or liquid form are now available. We fortuitously identified a euthyroid patient who wrongly consumed liquid L-T₄ with coffee at breakfast; after changing the time of consumption to 30 min before breakfast, no change in TSH, free T₄ (fT₄), and free tri-iodothyronine (fT₃) concentrations was observed. Once the first patient was identified, additional stable euthyroid patients who consumed liquid L-T₄ with coffee were identified. Patients were recruited by searching our 'thyroid patients' database. All the patients on liquid L-T₄ treatment were contacted by phone to ask them whether they took L-T₄ at breakfast. We identified 54 patients who were submitted to TSH, fT₄, and fT₃ evaluation, with the indication that the same dosage of L-T₄ be consumed 30 min before breakfast. We determined their TSH, fT₄, and fT₃ concentrations after 3 and 6 months again. no significant difference in thyroid hormone concentrations was observed in patients when they consumed L-T₄ at breakfast or when they consumed it 30 min before breakfast for 3 and 6 months (TSH: 2.5±1.1 vs 2.5±1.1 and 2.4±1.1 mIU/l respectively, fT₄: 12.4±2.4 vs 12.5±2.4 and 12.3±2.1 pg/ml respectively, and fT₃: 3.4±0.6 vs 3.4±0.6 and 3.3±0.5 pg/ml respectively). Oral liquid L-T₄ formulations could diminish the problem of L-T₄ malabsorption caused by coffee when using traditional tablet formulations.

Thermoelectric energy harvesting for a solid waste processing toilet

NASA Astrophysics Data System (ADS)

Stokes, C. David; Baldasaro, Nicholas G.; Bulman, Gary E.; Stoner, Brian R.

2014-06-01

Over 2.5 billion people do not have access to safe and effective sanitation. Without a sanitary sewer infrastructure, self-contained modular systems can provide solutions for these people in the developing world and remote areas. Our team is building a better toilet that processes human waste into burnable fuel and disinfects the liquid waste. The toilet employs energy harvesting to produce electricity and does not require external electrical power or consumable materials. RTI has partnered with Colorado State University, Duke University, and Roca Sanitario under a Bill and Melinda Gates Foundation Reinvent the Toilet Challenge (RTTC) grant to develop an advanced stand-alone, self-sufficient toilet to effectively process solid and liquid waste. The system operates through the following steps: 1) Solid-liquid separation, 2) Solid waste drying and sizing, 3) Solid waste combustion, and 4) Liquid waste disinfection. Thermoelectric energy harvesting is a key component to the system and provides the electric power for autonomous operation. A portion of the exhaust heat is captured through finned heat-sinks and converted to electricity by thermoelectric (TE) devices to provide power for the electrochemical treatment of the liquid waste, pumps, blowers, combustion ignition, and controls.

76 FR 71797 - Federal Agricultural Mortgage Corporation Funding and Fiscal Affairs; Farmer Mac Investments and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-18

...The Farm Credit Administration (FCA, Agency, us, or we) proposes to amend our regulations governing the Federal Agricultural Mortgage Corporation (Farmer Mac or the Corporation) in the areas of non-program investments and liquidity. We are proposing to modify the specific requirements supporting our objective to ensure that Farmer Mac maintains adequate liquidity to withstand stressful conditions in accordance with board-established risk tolerance and holds only high- quality, liquid investments in its liquidity reserve. We also propose to expand the allowable purposes of Farmer Mac's non-program investments to include investments that would add value to Farmer Mac's operations by complementing its program activities. Further, we request comments on the best approach for compliance with section 939A of the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act or DFA), which requires us to remove all references to and requirements relating to credit ratings and to substitute other appropriate standards of creditworthiness. Finally, we propose significant reorganizing of sections to make the flow of the issues covered more logical.

Intermittent access to sweet high-fat liquid induces increased palatability and motivation to consume in a rat model of binge consumption

PubMed Central

Lardeux, Sylvie; Kim, James J.; Nicola, Saleem M.

2013-01-01

Binge eating disorders are characterized by discrete episodes of rapid and excessive food consumption. In rats, giving intermittent access to sweet fat food mimics this aspect of binge eating. These models typically employ solid food; however, the total amount consumed depends on motivation, palatability and satiety, which are difficult to dissociate with solid food. In contrast, lick microstructure analysis can be used to dissociate these parameters when the ingestant is a liquid. Therefore, we developed a binge model using a liquid emulsion composed of corn oil, heavy cream and sugar. We show that rats given intermittent access to this high-fat emulsion develop binge-like behavior comparable to that previously observed with solid high-fat food. One feature of this behavior was a gradual escalation in consumption across 2.5 weeks of intermittent access, which was not apparent in rats given lower-fat liquid on the same access schedule. Lick microstructure analysis suggests that this escalation was due at least in part to increases in both motivation to consume and palatability-driven consumption. PMID:23499930

Liquid lens based on electrowetting: a new adaptive component for imaging applications in consumer electronics

NASA Astrophysics Data System (ADS)

Crassous, Jerome; Gabay, Claude; Liogier, Gaetan; Berge, Bruno

2004-12-01

A new technology for focus variation with direct electric control without moving part will be presented. The technology relies on an interface between two non-miscible transparent liquids, which can be deformed by electrowetting. This technology has been developed since 10 years in the lab and starts to be available commercially, with the following characteristics: large amplitude of dioptric correction (20 dioptries for a 5mm pupil size), fast response, small power consumption and good transmission in the visible range, clear pupil 1-10mm diameter. This paper will show the basic principle, as well as the physical limitations and optical aberrations due to differential thermal expansion of the two liquids in the cell. Experimental measurements made with a Schack Hartmann wave front analyzer will be presented, as well as numerical simulations of the liquid-liquid interface. Applications will be discussed, mainly in consumer electronics.

Preventing gastric sieving by blending a solid/water meal enhances satiation in healthy humans.

PubMed

Marciani, Luca; Hall, Nicholas; Pritchard, Susan E; Cox, Eleanor F; Totman, John J; Lad, Mita; Hoad, Caroline L; Foster, Tim J; Gowland, Penny A; Spiller, Robin C

2012-07-01

Separation of solids and liquids within the stomach allows faster gastric emptying of liquids compared with solids, a phenomenon known as sieving. We tested the hypothesis that blending a solid and water meal would abolish sieving, preventing the early rapid decrease in gastric volume and thereby enhancing satiety. We carried out 2 separate studies. Study 1 was a 2-way, crossover, satiety study of 22 healthy volunteers who consumed roasted chicken and vegetables with a glass of water (1008 kJ) or the same blended to a soup. They completed satiety visual analogue scales at intervals for 3 h. Study 2 was a 2-way, crossover, mechanistic study of 18 volunteers who consumed the same meals and underwent an MRI to assess gastric emptying, gallbladder contraction, and small bowel water content (SBWC) at intervals for 3 h. In Study 1, the soup meal was associated with reduced hunger (P = 0.02). In Study 2, the volume of the gastric contents after the soup meal decreased more slowly than after the solid/liquid meal (P = 0.0003). The soup meal caused greater gallbladder contraction (P < 0.04). SBWC showed a biphasic response with an initial "gastric" phase during which SBWC was greater when the solid/liquid meal was consumed (P < 0.001) and a later "small bowel" phase when SBWC was greater when the soup meal was consumed (P < 0.01). Blending the solid/liquid meal to a soup delayed gastric emptying and increased the hormonal response to feeding, which may contribute to enhanced postprandial satiety.

Improvement of dietary oil consumption following a community trial in a developing country: The role of translational research in health promotion

PubMed Central

Mohammadifard, Noushin; Toghianifar, Nafiseh; Sajjadi, Firoozeh; Alikhasi, Hassan; Kelishadi, Roya; Maghroun, Maryam; Esmaeili, Mostafa; Ehteshami, Shahram; Tabaie, Hamzeh; Sarrafzadegan, Nizal

2013-01-01

BACKGROUND This study aimed to determine the effects of the interventions of Isfahan Healthy Heart Program (IHHP) on the type of oil consumed at the population level. It also tried to assess how this strategy has been effective as a health policy. METHODS The IHHP, a six-year community intervention program (2001-07), aimed at health promotion through the modification of cardiovascular disease risk factors. It was performed in Isfahan and Najafabad counties (intervention area) and Arak county (reference area), all in central Iran. This study targeted the whole population of over 2,000,000 in the intervention area. The findings of annual independent sample surveys were compared with the reference area. Dietary interventions were performed as educational, environmental, and/or legislative strategies. RESULTS From 2001 to 2007, the mean of changes for hydrogenated oil consumption was -3.2 and -3.6, and for liquid oil it was 3.6 and 2.8 times per week in the intervention and reference areas, respectively (P < 0.001). According to Commerce office record, the increase in liquid oil distribution during 2000-2007 was significantly higher in Isfahan than Arak (34% vs. 25%). CONCLUSION The effects of the simple, comprehensive, and integrated action-oriented interventions of our program could influence policy making and its results at the community level. It can be adopted by other developing countries. PMID:23696757

Determination of phthalic acid esters in Chinese white spirit using dispersive liquid-liquid microextraction coupled with sweeping β-cyclodextrin-modified micellar electrokinetic chromatography.

PubMed

Sun, Jianzhi; He, Hui; Liu, Shuhui

2014-07-01

A simple method that consumes low organic solvent is proposed for the analysis of phthalic acid esters in Chinese white spirit using dispersive liquid-liquid microextraction coupled with sweeping-micellar electrokinetic chromatography. Tetrachloromethane and white-spirit-containing ethanol were used as the extraction and dispersing solvents, respectively. The electrophoresis separation buffer was composed of 5 mM β-cyclodextrin, 50 mM sodium dodecyl sulfate and 25 mM borate buffer (pH 9.2) with 9% acetonitrile, enabling the baseline resolution of the analytes within 13 min. Under the optimum conditions, satisfactory linearities (5-1000 ng/mL, r ≥ 0.9909), good reproducibility (RSD ≤ 6.7% for peak area, and RSD ≤ 2.8% for migration time), low detection limits (0.4-0.8 ng/mL) and acceptable recovery rates (89.6-105.7%) were obtained. The proposed method was successfully applied to 22 Chinese white spirits, and the content of dibutyl phthalate in 55% of the samples exceeded the Specific Migration Limit of 0.3 mg/kg established by the domestic and international regulations. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Soy protein supplement intake for 12 months has no effect on sexual maturation and may improve nutritional status in pre-pubertal children.

PubMed

Duitama, Sandra M; Zurita, Javier; Cordoba, Diana; Duran, Paola; Ilag, Leopold; Mejia, Wilson

2018-05-20

To evaluate the intake of a soy protein-based supplement (SPS) and its effects on the sexual maturation and nutritional status of prepubertal children who consumed it for a year. Healthy children (n = 51) were recruited and randomly assigned to consume the lunch fruit juice with (n = 29) or without (n = 22) addition of 45 g of a commercial soy protein-based supplement (SPS) over 12 months. Nutritional assessment including anthropometry (bodyweight, height, triceps skinfold thickness, mid-upper arm circumference), body mass index (BMI), upper arm muscle area, arm muscle circumference, upper arm area, upper arm fat area data were derived from measures using usual procedures; age and gender-specific percentiles were used as reference. Sexual maturation was measured by Tanner stage. Isoflavones were quantified using liquid chromatography and tandem mass spectrometry. Height, BMI/age, weight/age and height/age were significantly different (P < 0.05) at 12 months between girls in the control and intervention groups. Statistically significant differences between groups by gender (P < 0.05) were found in boys in the control group for the triceps skinfold thickness and fat area. Nutritional status was adequate according to the World Health Organization parameters. On average, 0.130 mg/kg body weight/day of isoflavones were consumed by children, which did not show significant differences in their sexual maturation. Consumption of SPS for 12 months did not affect sexual maturation or the onset of puberty in prepubertal boys and girls; however, it may have induced an increase in height, BMI/age, height/age and weight/age of the girls, associated with variations in fat-free mass. © 2018 Paediatrics and Child Health Division (The Royal Australasian College of Physicians).

Human health risk assessment of chloroxylenol in liquid hand soap and dishwashing soap used by consumers and health-care professionals.

PubMed

Yost, Lisa J; Rodricks, Joseph D; Turnbull, Duncan; DeLeo, Paul C; Nash, J Frank; Quiñones-Rivera, Antonio; Carlson, Pete A

2016-10-01

A quantitative human risk assessment of chloroxylenol was conducted for liquid hand and dishwashing soap products used by consumers and health-care workers. The toxicological data for chloroxylenol indicate lack of genotoxicity, no evidence of carcinogenicity, and minimal systemic toxicity. No observed adverse effect levels (NOAEL) were established from chronic toxicity studies, specifically a carcinogenicity study that found no cancer excess (18 mg/kg-day) and studies of developmental and reproductive toxicity (100 mg/kg-day). Exposure to chloroxylenol for adults and children was estimated for two types of rinse-off cleaning products, one liquid hand soap, and two dishwashing products. The identified NOAELs were used together with exposure estimates to derive margin of exposure (MOE) estimates for chloroxylenol (i.e., estimates of exposure over NOAELs). These estimates were designed with conservative assumptions and likely overestimate exposure and risk (i.e., highest frequency, 100% dermal penetration). The resulting MOEs ranged from 178 to over 100, 000, 000 indicating negligibly small potential for harm related to consumer or health-care worker exposure to chloroxylenol in liquid soaps used in dish washing and hand washing. Copyright © 2016 Elsevier Inc. All rights reserved.

Investigation of Health Effects According to the Exposure of Low Concentration Arsenic Contaminated Ground Water

PubMed Central

Hong, Young-seoub; Ye, Byeong-jin; Kim, Yu-mi; Kim, Byoung-gwon; Kang, Gyeong-hui; Kim, Jeong-jin; Song, Ki-hoon; Kim, Young-hun

2017-01-01

Recent epidemiological studies have reported adverse health effects, including skin cancer, due to low concentrations of arsenic via drinking water. We conducted a study to assess whether low arsenic contaminated ground water affected health of the residents who consumed it. For precise biomonitoring results, the inorganic (trivalent arsenite (As III) and pentavalent arsenate (As V)) and organic forms (monomethylarsonate (MMA) and dimethylarsinate (DMA)) of arsenic were separately quantified by combining high-performance liquid chromatography and inductively coupled plasma mass spectroscopy from urine samples. In conclusion, urinary As III, As V, MMA, and hair arsenic concentrations were significantly higher in residents who consumed arsenic contaminated ground water than control participants who consumed tap water. But, most health screening results did not show a statistically significant difference between exposed and control subjects. We presume that the elevated arsenic concentrations may not be sufficient to cause detectable health effects. Consumption of arsenic contaminated ground water could result in elevated urinary organic and inorganic arsenic concentrations. We recommend immediate discontinuation of ground water supply in this area for the safety of the residents. PMID:29186890

46 CFR 28.540 - Free surface.

Code of Federal Regulations, 2010 CFR

2010-10-01

... liquid that is not a consumable or containing fish or a fish product that can shift as the vessel heels... transfer of liquids as the vessel heels are installed in the piping. (c) The moment of transference method...

46 CFR 28.540 - Free surface.

Code of Federal Regulations, 2011 CFR

2011-10-01

... liquid that is not a consumable or containing fish or a fish product that can shift as the vessel heels... transfer of liquids as the vessel heels are installed in the piping. (c) The moment of transference method...

Pesticide residues in drinking water and associated risk to consumers in Ethiopia.

PubMed

Mekonen, Seblework; Argaw, Roba; Simanesew, Aklilu; Houbraken, Michael; Senaeve, David; Ambelu, Argaw; Spanoghe, Pieter

2016-11-01

Access to safe and reliable drinking water is vital for a healthy population. However, surface water may be contaminated with pesticides because of the nearby agricultural areas as well as from household application. Water samples were collected from water sources in Jimma zone and Addis Ababa, Ethiopia. The extraction and clean up of the samples were undertaken using liquid-solid and liquid-liquid methods. Human exposure was assessed by calculating the estimated daily intake (EDI) of pesticides in water and compared with the acceptable daily intake (ADI) and the acute reference dose (ARfD). The mean concentrations of 2,4-D, malathion, diazinon and fenpropimorph were 1.59-13.90 μg/l and 0.11-138 µg/l in Jimma and Addis Ababa water sources, respectively. The residue level of some of the pesticides were above the European drinking water guide line values, which is an indication of an illegal use of pesticides in the study areas. Concerning human health risk estimation, there was no acute risk (EDI < ARfD). However, chronic risks to human health were observed from exposure to diazinon and fenpropimorph (EDI > ADI) for Jimma and Addis Ababa populations, respectively. A comprehensive monitoring is required to reduce the level of pesticide residues in the water and to minimize particularly the long term human health risks. Copyright © 2016 Elsevier Ltd. All rights reserved.

Chemical Demonstrations with Consumer Chemicals: The Black and White Reaction.

ERIC Educational Resources Information Center

Wright, Stephen W.

2002-01-01

Describes a dramatic chemical demonstration in which chemicals that are black and white combine to produce a colorless liquid. Reactants include tincture of iodine, bleach, white vinegar, Epsom salt, vitamin C tablets, and liquid laundry starch. (DDR)

Real-time specific surface area measurements via laser-induced breakdown spectroscopy

USGS Publications Warehouse

Washburn, Kathryn E.; Birdwell, Justin E.; Howard, James E.

2017-01-01

From healthcare to cosmetics to environmental science, the specific surface area (SSA) of micro- and mesoporous materials or products can greatly affect their chemical and physical properties. SSA results are also widely used to examine source rocks in conventional and unconventional petroleum resource plays. Despite its importance, current methods to measure SSA are often cumbersome, time-consuming, or require cryogenic consumables (e.g., liquid nitrogen). These methods are not amenable to high-throughput environments, have stringent sample preparation requirements, and are not practical for use in the field. We present a new application of laser-induced breakdown spectroscopy for rapid measurement of SSA. This study evaluates geological samples, specifically organic-rich oil shales, but the approach is expected to be applicable to many other types of materials. The method uses optical emission spectroscopy to examine laser-generated plasma and quantify the amount of argon adsorbed to a sample during an inert gas purge. The technique can accommodate a wide range of sample sizes and geometries and has the potential for field use. These advantages for SSA measurement combined with the simultaneous acquisition of composition information make this a promising new approach for characterizing geologic samples and other materials.

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... BAN OF EXTREMELY FLAMMABLE CONTACT ADHESIVES § 1302.4 Banned hazardous products. Any extremely flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or...

Warning Statements and Safety Practices among Manufacturers and Distributors of Electronic Cigarette Liquids in the United States.

PubMed

Fagan, Pebbles; Pokhrel, Pallav; Herzog, Thaddeus A; Guy, Mignonne C; Sakuma, Kari-Lyn K; Trinidad, Dennis R; Cassel, Kevin; Jorgensen, Dorothy; Lynch, Tania; Felicitas-Perkins, Jamie Q; Palafox, Sherilyn; Hamamura, Faith; Maloney, Sarah; Degree, Kaylah; Sterling, Kymberle; Moolchan, Eric; Clanton, Mark S; Eissenberg, Thomas

2017-05-18

Prior to the Food and Drug Administration's (FDA) regulation of electronic cigarettes and warning statements related to nicotine addiction, there was no critical examination of manufacturer/distributor voluntary practices that could potentially inform FDA actions aimed to protect consumers. This study examined the content of warning statements and safety characteristics of electronic cigarette liquid bottles using a national sample. Research staff randomly selected four electronic cigarette liquid manufacturers/distributors from four U.S. geographic regions. Staff documented the characteristics of product packaging and content of warning statements on 147 electronic cigarette liquids (0-30 mg/ml of nicotine) purchased online from 16 manufacturers/distributors in April of 2016. Data showed that 97.9% of the electronic cigarette liquid bottles included a warning statement, most of which focused on nicotine exposure rather than health. Only 22.4% of bottles used a warning statement that indicated the product "contained nicotine". Of bottles that advertised a nicotine-based concentration of 12 mg/ml, 26% had a warning statements stated that the product "contains nicotine". None of the statements that indicated that the product "contained nicotine" stated that nicotine was "addictive". All bottles had a safety cap and 12% were in plastic shrink-wrap. Fifty-six percent of the websites had a minimum age requirement barrier that prevented under-aged persons from entering. Most manufacturers/distributors printed a warning statement on electronic cigarette liquid bottles, but avoided warning consumers about the presence and the addictiveness of nicotine. Studies are needed to examine manufacturer/distributor modifications to product packaging and how packaging affects consumer behaviors. These data can inform future FDA requirements related to the packaging and advertising of e-cigarette liquids; regulation related to the content of warning statements, including exposure warning statements, which are not currently mandated; and requirements on websites or language on packaging to help manufacturers adhere to the minimum age of purchase regulation. The data can also be used to help FDA develop additional guidance on the framing of statements on packaging that helps consumers make informed decisions about purchasing the product or protecting young people from use or unintentional exposure to the product. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Airborne concentrations of benzene associated with the historical use of some formulations of liquid wrench.

PubMed

Williams, Pamela R D; Knutsen, Jeffrey S; Atkinson, Chris; Madl, Amy K; Paustenbach, Dennis J

2007-08-01

The current study characterizes potential inhalation exposures to benzene associated with the historical use of some formulations of Liquid Wrench under specific test conditions. This product is a multiuse penetrant and lubricant commonly used in a variety of consumer and industrial settings. The study entailed the remanufacturing of several product formulations to have similar physical and chemical properties to most nonaerosol Liquid Wrench formulations between 1960 and 1978. The airborne concentrations of benzene and other constituents during the simulated application of these products were measured under a range of conditions. Nearly 200 breathing zone and area bystander air samples were collected during 11 different product use scenarios. Depending on the tests performed, average airborne concentrations of benzene ranged from approximately 0.2-9.9 mg/m(3) (0.08-3.8 ppm) for the 15-min personal samples; 0.1-8 mg/m(3) (0.04-3 ppm) for the 1-hr personal samples; and 0.1-5.1 mg/m(3) (0.04-2 ppm) for the 1-hr area samples. The 1-hr personal samples encompassed two 15-min product applications and two 15-min periods of standing within 5 to 10 feet of the work area. The measured airborne concentrations of benzene varied significantly based on the benzene content of the formulation tested (1%, 3%, 14%, or 30% v/v benzene) and the indoor air exchange rate but did not vary much with the base formulation of the product or the two quantities of Liquid Wrench used. The airborne concentrations of five other volatile chemicals (ethylbenzene, toluene, total xylenes, cyclohexane, and hexane) were also measured, and the results were consistent with the volatility and concentrations of these chemicals in the product tested. A linear regression analysis of air concentration compared with the chemical mole fraction in the solution and air exchange rate provided a relatively good fit to the data. The results of this study should be useful for evaluating potential inhalation exposures to benzene and other volatile chemicals that occurred during the past use of some formulations of Liquid Wrench and perhaps for some similar products containing these chemicals.

16 CFR 1500.231 - Guidance for hazardous liquid chemicals in children's products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... children's products. 1500.231 Section 1500.231 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... The U.S. Consumer Product Safety Commission issues this guidance to manufacturers, importers... subsequent hand-to-mouth or hand-to-eye activity. The specific type and frequency of behavior that a child...

Consumer product in vitro digestion model: Bioaccessibility of contaminants and its application in risk assessment.

PubMed

Brandon, Esther F A; Oomen, Agnes G; Rompelberg, Cathy J M; Versantvoort, Carolien H M; van Engelen, Jacqueline G M; Sips, Adrienne J A M

2006-03-01

This paper describes the applicability of in vitro digestion models as a tool for consumer products in (ad hoc) risk assessment. In current risk assessment, oral bioavailability from a specific product is considered to be equal to bioavailability found in toxicity studies in which contaminants are usually ingested via liquids or food matrices. To become bioavailable, contaminants must first be released from the product during the digestion process (i.e. become bioaccessible). Contaminants in consumer products may be less bioaccessible than contaminants in liquid or food. Therefore, the actual risk after oral exposure could be overestimated. This paper describes the applicability of a simple, reliable, fast and relatively inexpensive in vitro method for determining the bioaccessibility of a contaminant from a consumer product. Different models, representing sucking and/or swallowing were developed. The experimental design of each model can be adjusted to the appropriate exposure scenarios as determined by the risk assessor. Several contaminated consumer products were tested in the various models. Although relevant in vivo data are scare, we succeeded to preliminary validate the model for one case. This case showed good correlation and never underestimated the bioavailability. However, validation check needs to be continued.

16 CFR 309.11 - Certification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Importers, Producers, and Refiners of Non-Liquid Alternative Vehicle Fuels (other Than Electricity) and of... vehicle fuel (other than electricity), in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the non-liquid alternative vehicle fuel (other than electricity) consistent...

Mallow carotenoids determined by high-performance liquid chromatography

USDA-ARS?s Scientific Manuscript database

Mallow (corchorus olitorius) is a green vegetable, which is widely consumed either fresh or dry by Middle East population. This study was carried out to determine the contents of major carotenoids quantitatively in mallow, by using a High Performance Liquid Chromatography (HPLC) equipped with a Bis...

A supported liquid membrane system for the selective recovery of rare earth elements from neodymium-based permanent magnets

DOE PAGES

Kim, Daejin; Powell, Lawrence; Delmau, Lætitia H.; ...

2016-04-04

We present that the rare earth elements (REEs) play a vital role in the development of green energy and high-tech industries. In order to meet the fast-growing demand and to ensure sufficient supply of the REEs, it is essential to develop an efficient REE recovery process from post-consumer REE-containing products. In this research effort, we have developed a supported liquid membrane system utilizing polymeric hollow fiber modules to extract REEs from neodymium-based magnets with neutral extractants such as tetraoctyl digylcol amide (TODGA). The effect of process variables such as REE concentration, molar concentration of acid, and membrane area on REEmore » recovery was investigated. We have demonstrated the selective extraction and recovery of REEs such as Nd, Pr, and Dy without co-extraction of non-REEs from permanent NdFeB magnets through the supported liquid membrane system. The extracted REEs were then recovered by precipitation followed by the annealing step to obtain crystalline REE powders in nearly pure form. Finally, the recovered REE oxides were characterized by X-ray diffraction, scanning electron microscope coupled with energy-dispersive X-ray spectroscopy, and inductively coupled plasma–optical emission spectroscopy.« less

46 CFR 174.310 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Accommodation spaces 0.95 Consumable liquid tanks 0.00 or 0.95—whichever results in the more disabling condition...: (1) The hoppers are full of seawater; (2) The permeability of flooded spaces is as provided by Table... the calculations required by this section: (1) Dredged spoil in the hopper is a homogeneous liquid...

46 CFR 174.310 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Accommodation spaces 0.95 Consumable liquid tanks 0.00 or 0.95—whichever results in the more disabling condition...: (1) The hoppers are full of seawater; (2) The permeability of flooded spaces is as provided by Table... the calculations required by this section: (1) Dredged spoil in the hopper is a homogeneous liquid...

46 CFR 174.310 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Accommodation spaces 0.95 Consumable liquid tanks 0.00 or 0.95—whichever results in the more disabling condition...: (1) The hoppers are full of seawater; (2) The permeability of flooded spaces is as provided by Table... the calculations required by this section: (1) Dredged spoil in the hopper is a homogeneous liquid...

46 CFR 174.310 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Accommodation spaces 0.95 Consumable liquid tanks 0.00 or 0.95—whichever results in the more disabling condition...: (1) The hoppers are full of seawater; (2) The permeability of flooded spaces is as provided by Table... the calculations required by this section: (1) Dredged spoil in the hopper is a homogeneous liquid...

46 CFR 174.310 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Accommodation spaces 0.95 Consumable liquid tanks 0.00 or 0.95—whichever results in the more disabling condition...: (1) The hoppers are full of seawater; (2) The permeability of flooded spaces is as provided by Table... the calculations required by this section: (1) Dredged spoil in the hopper is a homogeneous liquid...

Electrowetting Variable Optics for Visible and Infrared Applications

NASA Astrophysics Data System (ADS)

Watson, Alexander Maxwell

Miniaturized variable optical devices are important for the fields of medical technology, optical communication, and consumer imaging devices. Areas ranging from endoscopy and optogenetics to atomic clocks and imaging all benefit from versatile optical systems. These applications all require precise and rapid control of imaging focal depth and lateral scanning. Electrowetting variable optics is one emergent technology that has the capability to provide focus tuning, beam steering, and even phase modulation in a small and robust package which requires no moving parts. Furthermore, electrowetting based devices there are attractive due to their transmissive nature, polarization insensitivity, low insertion loss, low electrical power requirements, and high optical quality. These features mean that electrowetting adaptive optical components are an attractive solution, compared with MEMS and liquid crystal optical components. Electrowetting is a technique that enables control of the shape of a liquid droplet with applied voltage. A conductive droplet on a dielectric surface alters its contact angle due to charges that build up between an underlying electrode and the surface of the droplet. This effect can be used to tune the curvature and tilt of liquids within cavities. The liquid boundary creates a high quality surface to use for lensing or steering applications. This thesis will focus on the development of electrowetting based lenses and prisms and applications in imaging for both visible and infrared wavelengths. Within this dissertation is the first demonstration of electrowetting lenses for phase control, as well as the investigation of non-aqueous electrowetting lens liquids for electrowetting lenses operation in the infrared. Key considerations that affect the performance and reliability are dielectric material and thickness, liquid selection and source of ionic conduction. The optical devices presented herein utilize judicious selection of dielectric material and electrowetting liquids to enable low voltage variable optics and demonstrate applications in microscopy and microendoscopy.

Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children's potential exposures.

PubMed

Tulve, Nicolle S; Stefaniak, Aleksandr B; Vance, Marina E; Rogers, Kim; Mwilu, Samuel; LeBouf, Ryan F; Schwegler-Berry, Diane; Willis, Robert; Thomas, Treye A; Marr, Linsey C

2015-05-01

Due to their antifungal, antibacterial, antiviral, and antimicrobial properties, silver nanoparticles (AgNPs) are used in consumer products intended for use by children or in the home. Children may be especially affected by the normal use of consumer products because of their physiological functions, developmental stage, and activities and behaviors. Despite much research to date, children's potential exposures to AgNPs are not well characterized. Our objectives were to characterize selected consumer products containing AgNPs and to use the data to estimate a child's potential non-dietary ingestion exposure. We identified and cataloged 165 consumer products claiming to contain AgNPs that may be used by or near children or found in the home. Nineteen products (textile, liquid, plastic) were selected for further analysis. We developed a tiered analytical approach to determine silver content, form (particulate or ionic), size, morphology, agglomeration state, and composition. Silver was detected in all products except one sippy cup body. Among products in a given category, silver mass contributions were highly variable and not always uniformly distributed within products, highlighting the need to sample multiple areas of a product. Electron microscopy confirmed the presence of AgNPs. Using this data, a child's potential non-dietary ingestion exposure to AgNPs when drinking milk formula from a sippy cup is 1.53 μg Ag/kg. Additional research is needed to understand the number and types of consumer products containing silver and the concentrations of silver in these products in order to more accurately predict children's potential aggregate and cumulative exposures to AgNPs. Published by Elsevier GmbH.

Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children’s potential exposures

PubMed Central

Tulve, Nicolle S.; Stefaniak, Aleksandr B.; Vance, Marina E.; Rogers, Kim; Mwilu, Samuel; LeBouf, Ryan F.; Schwegler-Berry, Diane; Willis, Robert; Thomas, Treye A.; Marr, Linsey C.

2015-01-01

Due to their antifungal, antibacterial, antiviral, and antimicrobial properties, silver nanoparticles (AgNPs) are used in consumer products intended for use by children or in the home. Children may be especially affected by the normal use of consumer products because of their physiological functions, developmental stage, and activities and behaviors. Despite much research to date, children’s potential exposures to AgNPs are not well characterized. Our objectives were to characterize selected consumer products containing AgNPs and to use the data to estimate a child’s potential non-dietary ingestion exposure. We identified and cataloged 165 consumer products claiming to contain AgNPs that may be used by or near children or found in the home. Nineteen products (textile, liquid, plastic) were selected for further analysis. We developed a tiered analytical approach to determine silver content, form (particulate or ionic), size, morphology, agglomeration state, and composition. Silver was detected in all products except one sippy cup body. Among products in a given category, silver mass contributions were highly variable and not always uniformly distributed within products, highlighting the need to sample multiple areas of a product. Electron microscopy confirmed the presence of AgNPs. Using this data, a child’s potential non-dietary ingestion exposure to AgNPs when drinking milk formula from a sippy cup is 1.53 μg Ag/kg. Additional research is needed to understand the number and types of consumer products containing silver and the concentrations of silver in these products in order to more accurately predict children’s potential aggregate and cumulative exposures to AgNPs. PMID:25747543

Food Safety: Recommendations for Determining Doneness in Consumer Egg Dish Recipes and Measurement of Endpoint Temperatures When Recipes Are Followed.

PubMed

Godwin, Sandria; Maughan, Curtis; Chambers, Edgar

2016-06-23

Many consumers do not follow recommended food safety practices for cooking egg dishes, such as pies, quiches, and casseroles, potentially leading to foodborne illnesses such as Salmonellosis. The United States Department of Agriculture (USDA) recommends cooking egg mixtures until the center reaches 71 °C (160 °F). The objectives of this study were to determine what endpoint temperature information consumers receive from egg dish recipes, and if recipes would lead to safe temperatures when followed. Egg dish recipes ( n = 226) from 65 websites, 50 cookbooks, and nine magazine titles (multiple issues of each) were analyzed. Time was the most frequently used indicator, given in 92% of the recipes, with 15% using only time. Other indicators included: set (89), browned (76), clean toothpick/knife (60), puffed (27), and jiggled (13). Only two recipes indicated final endpoint temperatures. Three recipes (a pie, a quiche, and an egg casserole) were chosen and prepared in triplicate to see if they would reach recommended temperatures. The pie and quiche were still liquid at 71 °C, and were well over the recommended temperature when cooked according to instructions, but the egg casserole was not consistently above 71 °C, when the recipe instructions indicated it was done and the center was light brown and "jiggled" This research indicates that consumers are not receiving information on endpoint temperatures in egg recipes, but the likelihood of foodborne illness is low since most dishes probably be cooked past the recommended temperature before the consumer considers them done unless there are many inclusions that may absorb liquid and reduce the appearance of liquid in the dish.

Food Safety: Recommendations for Determining Doneness in Consumer Egg Dish Recipes and Measurement of Endpoint Temperatures When Recipes Are Followed

PubMed Central

Godwin, Sandria; Maughan, Curtis; Chambers, Edgar

2016-01-01

Many consumers do not follow recommended food safety practices for cooking egg dishes, such as pies, quiches, and casseroles, potentially leading to foodborne illnesses such as Salmonellosis. The United States Department of Agriculture (USDA) recommends cooking egg mixtures until the center reaches 71 °C (160 °F). The objectives of this study were to determine what endpoint temperature information consumers receive from egg dish recipes, and if recipes would lead to safe temperatures when followed. Egg dish recipes (n = 226) from 65 websites, 50 cookbooks, and nine magazine titles (multiple issues of each) were analyzed. Time was the most frequently used indicator, given in 92% of the recipes, with 15% using only time. Other indicators included: set (89), browned (76), clean toothpick/knife (60), puffed (27), and jiggled (13). Only two recipes indicated final endpoint temperatures. Three recipes (a pie, a quiche, and an egg casserole) were chosen and prepared in triplicate to see if they would reach recommended temperatures. The pie and quiche were still liquid at 71 °C, and were well over the recommended temperature when cooked according to instructions, but the egg casserole was not consistently above 71 °C, when the recipe instructions indicated it was done and the center was light brown and “jiggled” This research indicates that consumers are not receiving information on endpoint temperatures in egg recipes, but the likelihood of foodborne illness is low since most dishes probably be cooked past the recommended temperature before the consumer considers them done unless there are many inclusions that may absorb liquid and reduce the appearance of liquid in the dish. PMID:28231140

Draft Genome Sequences of Klebsiella oxytoca Isolates Originating from a Highly Contaminated Liquid Hand Soap Product.

PubMed

Hammerl, J A; Lasch, P; Nitsche, A; Dabrowski, P W; Hahmann, H; Wicke, A; Kleta, S; Al Dahouk, S; Dieckmann, R

2015-07-23

In 2013, contaminated liquid soap was detected by routine microbiological monitoring of consumer products through state health authorities. Because of its high load of Klebsiella oxytoca, the liquid soap was notified via the European Union Rapid Alert System for Dangerous Non-Food Products (EU-RAPEX) and recalled. Here, we present two draft genome sequences and a summary of their general features. Copyright © 2015 Hammerl et al.

Industrial uses and applications of ionic liquids

NASA Astrophysics Data System (ADS)

Gutowski, Keith E.

2018-02-01

Ionic liquids are salts that melt at low temperatures (usually defined as less than 100 °C) and have a number of interesting properties that make them useful for industrial applications. Typical ionic liquid properties include high thermal stabilities, negligible vapor pressures, wide liquidus ranges, broad electrochemical windows, and unique solvation properties. Furthermore, the potential combinations of cations and anions provide nearly unlimited chemical tunability. This article will describe the diverse industrial uses of ionic liquids and how their unique properties are leveraged, with examples ranging from chemical processing to consumer packaged goods.

Minnesota Consumer Education Program. "Consumers of the 90s."

ERIC Educational Resources Information Center

Minnesota Council on Economic Education, Minneapolis.

This teacher's guide on consumer literacy for grades 9-12 is designed for use in the following subject areas: business education, consumer law, economics, home economics, and social studies. Four units are included: (1) consumer decision making--consumer law and protection; (2) major shopping areas--transportation dilemma; (3) housing; and (4)…

The Implementation and Demonstration of Flame Detection and Wireless Communications in a Consumer Appliance to Improve Fire Detection Capabilities

DTIC Science & Technology

2007-06-08

Temperature Detectors (RTDs), thermistors , bimetallic devices, liquid expansion devices, and change-of-state devices. Liquid expansion, change-of...sterilization lamps, halogen lamps, direct or reflected sunlight on the sensor, electrical or welding sparks, radiation sources and high 7 Figure 1, Standard

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

46 CFR 42.20-9 - Initial conditions of loading.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Fifty percent of the total capacity of all tanks and spaces fitted to contain consumable liquids or stores must be assumed to be distributed to accomplish the following: (i) Each tank and space fitted to... only partially filled. In the case of liquid cargoes, fully loaded means 98 percent full. (3) If the...

76 FR 4207 - Orderly Liquidation Authority Provisions of the Dodd-Frank Wall Street Reform and Consumer...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... of failing systemic financial companies. DATES: This rule is effective January 25, 2011. Written... procedure is similar to that which is applied to systemic risk determinations under section 13 of the FDI... enforced. Parties who are familiar with the liquidation of insured depository institutions under the FDI...

Composition and Elution Behavior of Various Elements from Printed Circuit Boards, Cathode-ray Tube Glass, and Liquid-crystal Displays in Waste Consumer Electronics.

PubMed

Inaba, Kazuho; Murata, Tomoyoshi; Yamamura, Shigeki; Nagano, Masaaki; Iwasaki, Kazuhiro; Nakajima, Daisuke; Takigami, Hidetaka

2018-01-01

The contents and elution behavior of metals in consumer electronics parts were determined so as to understand their maximum environmental risk. Elements contained most in printed-circuit boards were Cu, Si, Br, Ca, Al, Sn, Pb, Sb, Ba, Fe, Ni, Ti, and Zn; in cathode-ray tube glass were Si, Pb, Ba, Sr, Zn, Zr, Ca, and Sb; in arsenic contained liquid-crystal displays were Si, Ca, Sr, Ba, As, and Fe; and in antimony contained liquid-crystal displays were Si, Ba, Ca, Sb, Sr, Fe, and Sn. The elements eluted most from printed-circuit boards were Zn, Pb, and Cu; from cathode-ray tube glass were Pb, Zn, B, Ba, and Si; and from liquid-crystal displays were B and Si, and the toxic As and Sb. The amount eluted was greatest at acidic pH. It was revealed that officially recommended 6-h-shaking with a pure water test was insufficient to understand the real environmental risk of waste electronics.

Impact of lysine and liquid smoke as flavor enhancers on the quality of low-fat Bologna-type sausages with 50% replacement of NaCl by KCl.

PubMed

Dos Santos Alves, Larissa Aparecida Agostinho; Lorenzo, José Manuel; Gonçalves, Carlos Antonio Alvarenga; Dos Santos, Bibiana Alves; Heck, Rosane Teresinha; Cichoski, Alexandre José; Campagnol, Paulo Cezar Bastianello

2017-01-01

Low-fat Bologna-type sausages were produced with 50% of NaCl replaced by KCl and with addition of lysine and/or liquid smoke as flavor enhancers. The influence of sodium reduction on technological, physicochemical, and microbiological properties was determined. In addition, the sensory properties were evaluated using a Check all that apply questionnaire (CATA) and a consumer study. The partial replacement of NaCl by KCl did not have negative impacts on physicochemical, technological, and microbiological properties. However, the addition of KCl affected the sensory acceptance, as consumers identified by CATA questionnaire a reduction in salty taste and an increase in bitter, astringent, and metallic taste. The isolated or combined addition of lysine and liquid smoke reduced the sensory quality defects caused by the addition of KCl. Therefore, high quality low-fat Bologna-type sausages with sodium reduction close to 50% can be produced by replacing 50% NaCl by KCl and with addition of 1% lysine and/or 0.1% liquid smoke. Copyright © 2016 Elsevier Ltd. All rights reserved.

Electrohydrodynamically driven large-area liquid ion sources

DOEpatents

Pregenzer, Arian L.

1988-01-01

A large-area liquid ion source comprises means for generating, over a large area of the surface of a liquid, an electric field of a strength sufficient to induce emission of ions from a large area of said liquid. Large areas in this context are those distinct from emitting areas in unidimensional emitters.

Process optimization and consumer acceptability of salted ground beef patties cooked and held hot in flavored marinade.

PubMed

Shrestha, Subash; Cornforth, Daren; Nummer, Brian A

2010-09-01

Food safety is paramount for cooking hamburger. The center must reach 71 °C (or 68 °C for 15 s) to assure destruction of E. coli O157:H7 and other food pathogens. This is difficult to achieve during grilling or frying of thick burgers without overcooking the surface. Thus, the feasibility of partially or completely cooking frozen patties in liquid (93 °C water) together with hot holding in liquid was investigated. Initial studies demonstrated that compared to frying, liquid cooking decreased (P < 0.05) patty diameter (98 compared with 93 mm) and increased (P < 0.05) thickness (18.1 compared with 15.6 mm). Liquid cooked patties had greater weight loss (P < 0.05) immediately after cooking (29 compared with 21%), but reabsorbed moisture and were not different from fried patties after 1 h hot water holding (61 °C). Protein and fat content were not affected by cooking method. However, liquid cooked patties were rated lower (P < 0.05) than fried patties for appearance (5.7 compared with 7.5) and flavor (5.9 compared with 7.5). An 8-member focus group then evaluated methods to improve both appearance and flavor. Salted, grill-marked patties were preferred, and caramel coloring was needed in the marinade to obtain acceptable flavor and color during liquid cooking or hot holding. Patties with 0.75% salt that were grill-marked and then finish-cooked in hot marinade (0.75% salt, 0.3% caramel color) were rated acceptable (P < 0.05) by consumers for up to 4 h hot holding in marinade, with mean hedonic panel ratings > 7.0 (like moderately) for appearance, juiciness, flavor, and texture. Grill-marked and marinade-cooked ground beef patties reached a safe internal cooking temperature without overcooking the surface. Burgers cooked using this method maintained high consumer acceptability right after cooking and for up to 4 h of hot holding. Consumers and foodservice operations could use this method without specialized equipment, and instead use inexpensive and common equipment such as a soup pot or a restaurant steam table. Use of marinades (salt/caramel color or others) in this cooking and holding method provides a nearly endless culinary flavoring opportunity.

Effect of intake of different dietary protein sources on plasma amino acid profiles at rest and after exercise.

PubMed

Burke, Louise M; Winter, Julie A; Cameron-Smith, David; Enslen, Marc; Farnfield, Michelle; Decombaz, Jacques

2012-12-01

The authors undertook 2 crossover-designed studies to characterize plasma amino acid (AA) responses to the intake of 20 g of protein. In Study 1, 15 untrained and overnight-fasted subjects consumed 20 g protein from skim milk, soy milk, beefsteak, boiled egg, and a liquid meal supplement. In Study 2, 10 fasted endurance-trained subjects consumed 20 g protein from a protein-rich sports bar at rest and after a 60-min submaximal ride. Plasma AA concentrations were measured immediately before and for 180 min after food ingestion using a gas-chromatography flame-ionization detection technique. A pharmacokinetic analysis was undertaken for profiles of total AAs (TAA), essential AAs, branched-chain AAs (BCAA), and leucine. Although area-under-the-curve values for plasma TAA were similar across protein sources, the pattern of aminoacidemia showed robust differences between foods, with liquid forms of protein achieving peak concentrations twice as quickly after ingestion as solid protein-rich foods (e.g., ~50 min vs ~100 min) and skim milk achieving a significantly faster peak leucine concentration than all other foods (~25 min). Completing exercise before ingesting protein sources did not cause statistically significant changes in the pattern of delivery of key AAs, BCAAs, and leucine apart from a 20-40% increase in the rate of elimination. These results may be useful to plan the type and timing of intake of protein-rich foods to maximize the protein synthetic response to various stimuli such as exercise.

[Athletic drinks: body rehydration as a vital aspect].

PubMed

Novokshanova, A L; Ozhiganova, E V

2013-01-01

106 students of the Faculty of Physical Education and athletes who train at the center of power arts (aged 18 to 30 years) have been investigated. The relation between the amount of lost and consumed liquid during physical activity has been studied. The amount of fluid lost was determined by the method of measuring the body mass of an athlete before and after the workout. The kinds of liquids used for eliminating dehydration have been analyzed. It has been revealed that while doing some physical activity and sports most of those being tested don't restore the lost liquid volume (with an average weight loss of 1,15 kg the amount of fluids they drunk was 0.91 l). In the given research the interrelation between the body weight and the lost liquid amount, and between the lost liquid amount and the kind of sports has not been exposed. Liquid loss of athletes in the medium intensive training process during the period of 1.5 h at the ambient temperature 21-22 degrees C constituted on average 1.53% of the body weight and didn't depend on the kind of sports. Despite the advantages of the athletic drinks are evident, the share of their consumption among the athletes in Russia is negligibly small. The great majority of respondents, namely 72%, use common or mineral water to restore the liquid. Only 6% of those being tested consume specialized athletic drinks.

System to Repair Deformations in Elastomeric Hoses

DTIC Science & Technology

2017-01-05

ability of the hose to transport liquid and gas as intended. Repairing and/or replacing these hoses can prove to be costly, time consuming, and labor...position, filling the hose with compressed gas and immersing the hose in the heated liquid . This can be performed on portions of the hose. [0022] Other...position against the buoyant gas -filled hose 12. Accordingly, cover 34 can be used to urge members 26 into the liquid with sufficient force to

Advancing Polymer-Supported Ionogel Electrolytes Formed via Radical Polymerization

NASA Astrophysics Data System (ADS)

Visentin, Adam F.

Applications ranging from consumer electronics to the electric grid have placed demands on current energy storage technologies. There is a drive for devices that store more energy for rapid consumption in the case of electric cars and the power grid, and safer, versatile design options for consumer electronics. Electrochemical double-layer capacitors (EDLCs) are an option that has garnered attention as a means to address these varied energy storage demands. EDLCs utilize charge separation in electrolytes to store energy. This energy storage mechanism allows for greater power density (W kg -1) than batteries and higher energy density (Wh kg-1) than conventional capacitors - along with a robust lifetime in the range of thousands to millions of charge-discharge cycles. Safety and working voltage windows of EDLCs currently on the market are limited by the organic solvents utilized in the electrolyte. A potential solution lies in the replacement of the organic solvents with ionic liquids, or room-temperature molten salts. Ionic liquids possess many superior properties in comparison to conventional solvents: wide electrochemical window, low volatility, nonflammability, and favorable ionic conductivity. It has been an endeavor of this work to exploit these advantages while altering the liquid form factor into a gel. An ionic liquid/solid support scaffold composite electrolyte, or ionogel, adds additional benefits: flexible device design, lower encapsulation weight, and elimination of electrolyte leakage. This work has focused on investigations of a UV-polymerizable monomer, poly(ethylene glycol) diacrylate, as a precursor for forming ionogels in situ. The trade-off between gaining mechanical stability at the cost of ionic conductivity has been investigated for numerous ionogel systems. While gaining a greater understanding of the interactions between the gel scaffold and ionic liquid, an ionogel with the highest known ionic conductivity to date (13.1 mS cm-1) was fabricated. In addition to developing an understanding of UV-polymerized systems, a rapid 10 to 20 second, microwave-assisted polymerization method was developed as a novel means to create ionogels. These ionogels exhibited comparable mechanical response and ionic conductivity levels to those gels fabricated by the UV method. Lastly, an EDLC prototype was fabricated using a UV-polymerized ionogel formed in situ between two high-surface area carbon electrodes. The device performance metrics were comparable to commercial EDLCs, and functioned for several thousand cycles with limited loss in capacitance.

Market trends in the projection display industry

NASA Astrophysics Data System (ADS)

Dash, Sweta

2001-03-01

The projection display industry represents a multibillion- dollar market that includes four distinct technologies. High-volume consumer products and high-value business products drive the market, with different technologies being used in different application markets. The consumer market is dominated by rear CRT technology, especially in the projection TV segment. Rear LCD (liquid crystal display), MEMS/DLP (or Digital Light Processing TM) and LCOS (Liquid-crystal-on-silicon) TVs are slowly emerging as future competitors to rear CRT projectors. Front CRT projectors are also facing challenges from LCD and DLP technology for the home theater market while the business market is completely dominated by front LCD and DLP technology. Three-chip DLP projectors have replaced liquid crystal light valves in large venue applications where projectors have higher light output requirements. In recent years front LCD and LCOS projectors have been increasingly competing with 3-chip DLP projectors especially at the low end of the large venue application market. Within the next five years the projection market will experience very fast growth. Sales and presentation applications, which are the fastest growing applications in the business market, will continue to be the major driving force for the growth for front projectors, and the shift in the consumer market to digital and HDTV products will drive the rear projection market.

A Graphical Simulation of Vapor-Liquid Equilibrium for Use as an Undergraduate Laboratory Experiment and to Demonstrate the Concept of Mathematical Modeling.

ERIC Educational Resources Information Center

Whitman, David L.; Terry, Ronald E.

1985-01-01

Demonstrating petroleum engineering concepts in undergraduate laboratories often requires expensive and time-consuming experiments. To eliminate these problems, a graphical simulation technique was developed for junior-level laboratories which illustrate vapor-liquid equilibrium and the use of mathematical modeling. A description of this…

Consumer behaviour in the waiting area.

PubMed

Mobach, Mark P

2007-02-01

To determine consumer behaviour in the pharmacy waiting area. The applied methods for data-collection were direct observations. Three Dutch community pharmacies were selected for the study. The topics in the observation list were based on available services at each waiting area (brochures, books, illuminated new trailer, children's play area, etc.). Per patient each activity was registered, and at each pharmacy the behaviour was studied for 2 weeks. Most patients only waited during the waiting time at the studied pharmacies. Few consumers obtained written information during their wait. The waiting area may have latent possibilities to expand the information function of the pharmacy and combine this with other activities that distract the consumer from the wait. Transdisciplinary research, combining knowledge from pharmacy practice research with consumer research, has been a useful approach to add information on queueing behaviour of consumers.

Modeling Primary Atomization Processes

DTIC Science & Technology

1999-02-01

consumable , catalytic igniter has shown to provide reliable, reproducible ignition in hydrogen peroxide/polyethylene hybrid engines. Currently, a...verified in a hybrid rocket using hydrogen peroxide as oxidizer and polyethylene as fuel. The engine made use of a unique Consumable Catalytic Bed (CCB...interest to the liquid and hybrid rocket engine community. TECHNOLOGY TRANSFER Performer Customer Result Application 1 S. D. Heister Purdue University

National and regional assessment of the antibacterial soap market: a step toward determining the impact of prevalent antibacterial soaps.

PubMed

Perencevich, E N; Wong, M T; Harris, A D

2001-10-01

Consumer antibacterial soaps contain triclosan or triclocarban. No scientific data have been published to suggest that the use of antibacterial agents in household products prevents infection, and triclosan resistance mechanisms have recently been identified. Little data are available regarding the prevalence of antibacterial agents contained in consumer soaps. In a physician-performed survey of 23 stores in 10 states from December 1999 to April 2000, investigators determined the number of national brand liquid and bar soaps and percent of each containing antibacterial agents sold at national chain, regional grocery, and Internet stores. Antibacterial agents were present in 76% of liquid soaps and 29% of bar soaps available nationally. There were no differences found between national, regional, and Internet stores. Overall, 45% of surveyed soaps contain antibacterial agents. With limited documented benefits and experimental laboratory evidence suggesting possible adverse effects on the emergence of antimicrobial resistance, consumer antibacterial use of this magnitude should be questioned.

Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism

NASA Astrophysics Data System (ADS)

Zheng, Yi; He, Zhi-Zhu; Yang, Jun; Liu, Jing

2014-04-01

Printed electronics is becoming increasingly important in a variety of newly emerging areas. However, restricted to the rather limited conductive inks and available printing strategies, the current electronics manufacture is usually confined to industry level. Here, we show a highly cost-effective and entirely automatic printing way towards personal electronics making, through introducing a tapping-mode composite fluid delivery system. Fundamental mechanisms regarding the reliable printing, transfer and adhesion of the liquid metal inks on the substrate were disclosed through systematic theoretical interpretation and experimental measurements. With this liquid metal printer, a series of representative electronic patterns spanning from single wires to desired complex configurations such as integrated circuit (IC), printed-circuits-on-board (PCB), electronic paintings, or more do-it-yourself (DIY) devices, were demonstrated to be printed out with high precision in a moment. And the total machine cost already reached personally affordable price. This is hard to achieve by a conventional PCB technology which generally takes long time and is material, water and energy consuming, while the existing printed electronics is still far away from the real direct printing goal. The present work opens the way for large scale personal electronics manufacture and is expected to generate important value for the coming society.

Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism.

PubMed

Zheng, Yi; He, Zhi-Zhu; Yang, Jun; Liu, Jing

2014-04-04

Printed electronics is becoming increasingly important in a variety of newly emerging areas. However, restricted to the rather limited conductive inks and available printing strategies, the current electronics manufacture is usually confined to industry level. Here, we show a highly cost-effective and entirely automatic printing way towards personal electronics making, through introducing a tapping-mode composite fluid delivery system. Fundamental mechanisms regarding the reliable printing, transfer and adhesion of the liquid metal inks on the substrate were disclosed through systematic theoretical interpretation and experimental measurements. With this liquid metal printer, a series of representative electronic patterns spanning from single wires to desired complex configurations such as integrated circuit (IC), printed-circuits-on-board (PCB), electronic paintings, or more do-it-yourself (DIY) devices, were demonstrated to be printed out with high precision in a moment. And the total machine cost already reached personally affordable price. This is hard to achieve by a conventional PCB technology which generally takes long time and is material, water and energy consuming, while the existing printed electronics is still far away from the real direct printing goal. The present work opens the way for large scale personal electronics manufacture and is expected to generate important value for the coming society.

Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism

PubMed Central

Zheng, Yi; He, Zhi-Zhu; Yang, Jun; Liu, Jing

2014-01-01

Printed electronics is becoming increasingly important in a variety of newly emerging areas. However, restricted to the rather limited conductive inks and available printing strategies, the current electronics manufacture is usually confined to industry level. Here, we show a highly cost-effective and entirely automatic printing way towards personal electronics making, through introducing a tapping-mode composite fluid delivery system. Fundamental mechanisms regarding the reliable printing, transfer and adhesion of the liquid metal inks on the substrate were disclosed through systematic theoretical interpretation and experimental measurements. With this liquid metal printer, a series of representative electronic patterns spanning from single wires to desired complex configurations such as integrated circuit (IC), printed-circuits-on-board (PCB), electronic paintings, or more do-it-yourself (DIY) devices, were demonstrated to be printed out with high precision in a moment. And the total machine cost already reached personally affordable price. This is hard to achieve by a conventional PCB technology which generally takes long time and is material, water and energy consuming, while the existing printed electronics is still far away from the real direct printing goal. The present work opens the way for large scale personal electronics manufacture and is expected to generate important value for the coming society. PMID:24699375

Military Influence Operations: Review of the Consumer Psychology Literature

DTIC Science & Technology

2008-11-01

behaviour research. Research in the area of consumer psychology is concerned with the relationship between people (either individuals or groups) and the...question by reviewing 20 articles from the domain of consumer psychology and consumer behaviour research.2 1.2 Search Strategies and Findings In keeping...and the products and services that they use. A prominent emphasis within the area of consumer psychology is the study of consumer behaviour

Recovery of Picloram and 2,4-Dichlorophenoxyacetic Acid from Aqueous Samples by Reversed-Phase Solid-Phase Extraction

Treesearch

Martha J.M. Wells; Jerry L. Michael

1987-01-01

Extensive preparation of samples before chromatographic analysis is usually the most time-consuming process in the determination of many organic compounds in environmental matrices. In the past, removal of some organic from aqueous solution was commonly done by liquid/liquid extraction. However, the introduction of stable, covalently bonded reversed-phase sorbents now...

From rhetoric to reality: consumer engagement in 16 multi-stakeholder alliances.

PubMed

Greene, Jessica; Farley, Diane C; Christianson, Jon B; Scanlon, Dennis P; Shi, Yunfeng

2016-08-01

A key component of the Aligning Forces for Quality (AF4Q) program was engaging consumers in their health and healthcare. We examined the extent to which the alliances embraced 4 areas of consumer engagement: self-management, consumer friendliness of reports of healthcare provider quality, involvement of consumers in alliance governance, and the integration of consumers into quality improvement teams. We used a largely qualitative approach. The evaluation team conducted 1100 in-depth interviews with alliance stakeholders. Two authors reviewed the consumer engagement data for each alliance to assess its level of embrace in the 4 consumer engagement areas. For consumer friendliness of public reporting websites, we also assessed alliance public reports for reading level, technical language, and evaluable displays. Population-level effects were also examined for self-management and public reporting. Consumer engagement was new to most alliances, and few had staff with consumer engagement expertise or existing consumer constituencies. For each area of consumer engagement, some alliances enthusiastically embraced the work, other alliances made a concerted but limited effort to develop programs, and a third group of alliances did the minimum work required. Integrating consumers into governance was the area most often embraced, followed by making public reports consumer friendly. Two alliances strongly embraced both self-management and integrating patients into quality improvement efforts. The AF4Q program did not have greater population level effects from self-management or public reporting than were those observed in a national comparison sample. The AF4Q program sparked a few alliances to develop robust consumer engagement programming, while most alliances tried consumer engagement efforts for the first time and developed an appreciation for integrating consumer perspectives into their work.

Effects of weight loss using supplementation with Lactobacillus strains on body fat and medium-chain acylcarnitines in overweight individuals.

PubMed

Kim, Minkyung; Kim, Minjoo; Kang, Miso; Yoo, Hye Jin; Kim, Min Sun; Ahn, Young-Tae; Sim, Jae-Hun; Jee, Sun Ha; Lee, Jong Ho

2017-01-25

Our previous study showed that supplementation with a combination of Lactobacillus curvatus (L. curvatus) HY7601 and Lactobacillus plantarum (L. plantarum) KY1032 reduced the body weight, body fat percentage, body fat mass and L1 subcutaneous fat area in overweight subjects. We aimed to evaluate whether the changes in adiposity after supplementation with Lactobacillus strains were associated with metabolic intermediates. A randomized, double-blind, placebo-controlled study was conducted on 66 non-diabetic and overweight individuals. Over a 12-week period, the probiotic group consumed 2 g of probiotic powder, whereas the placebo group consumed the same product without the probiotics. To investigate metabolic alterations, we performed plasma metabolomics using ultra-performance liquid chromatography and mass spectrometry (UPLC-LTQ/Orbitrap MS). Probiotic supplementation significantly increased the levels of octenoylcarnitine (C8:1), tetradecenoylcarnitine (C14:1), decanoylcarnitine (C10) and dodecenoylcarnitine (C12:1) compared with the levels from placebo supplementation. In the probiotic group, the changes in the body weight, body fat percentage, body fat mass and L1 subcutaneous fat area were negatively associated with changes in the levels of C8:1, C14:1, C10 and C12:1 acylcarnitines. In overweight individuals, probiotic-induced weight loss and adiposity reduction from the probiotic supplementation were associated with an increase in medium-chain acylcarnitines.

Survey of Deoxynivalenol and Aflatoxin B1 in Instant Noodles and Bread Consumed in Thailand by Using Liquid Chromatography-Tandem Mass Spectrometry.

PubMed

Pralatnet, Sasithorn; Poapolathep, Saranya; Giorgi, Mario; Imsilp, Kanjana; Kumagai, Susumu; Poapolathep, Amnart

2016-07-01

One hundred wheat product samples (50 instant noodle samples and 50 bread samples) were collected from supermarkets in Bangkok, Thailand. Deoxynivalenol (DON) and aflatoxin B1 (AFB1) contamination in these products was analyzed using a validated liquid chromatography-tandem mass spectrometry method. The limit of quantification values of DON and AFB1 in the instant noodles and bread were 2 and 1 ng g(-1), respectively. The survey found that DON was quantifiable in 40% of collected samples, in 2% of noodles (0.089 μg g(-1)), and in 78% of breads (0.004 to 0.331 μg g(-1)). AFB1 was below the limit of quantification of the method in all of the tested samples. The results suggest that the risk of DON exposure via noodles and breads is very low in urban areas of Thailand. No risk can be attributable to AFB1 exposure in the same food matrices, but further studies with a larger sample size are needed to confirm these data.

Concentrated liquid detergent pod ingestion in children.

PubMed

Sidhu, Natasha; Jaeger, Matthew W

2014-12-01

Concentrated liquid detergent pods are an emerging public health hazard, especially in pediatric patients. Ingestion is a more common route of exposure for liquid detergent pods compared with non-pod detergents and it tends to be associated with more severe adverse effects. We present 3 cases that demonstrate the varied clinical symptoms resulting from detergent pod ingestion. These cases not only demonstrate findings such as gastrointestinal and respiratory symptoms but also show more rare neurological symptoms. The cases highlight the dangers of concentrated liquid detergent pod ingestion. To help prevent further life-threatening injuries, there is a need for more consumer information and provider knowledge about the potential adverse complications.

Products Claiming to "Cure" Cancer Are a Cruel Deception

MedlinePlus

... Products For Consumers Home For Consumers Consumer Updates Products Claiming to "Cure" Cancer Are a Cruel Deception ... About FDA Contact FDA Browse by Product Area Product Areas back Food Drugs Medical Devices Radiation-Emitting ...

Comparative efficiency of technologies for conversion and transportation of energy resources of Russia's eastern regions to NEA countries

NASA Astrophysics Data System (ADS)

Kler, Aleksandr; Tyurina, Elina; Mednikov, Aleksandr

2018-01-01

The paper presents perspective technologies for combined conversion of fossil fuels into synthetic liquid fuels and electricity. The comparative efficiency of various process flows of conversion and transportation of energy resources of Russia's east that are aimed at supplying electricity to remote consumers is presented. These also include process flows based on production of synthetic liquid fuel.

46 CFR 177.202 - Plans and information required.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with number of circuits and rating of energy consuming devices; (vii) Type of capacity of storage... including: bilge, ballast, hydraulic, sanitary, compressed air, combustible and flammable liquids, vents...

46 CFR 177.202 - Plans and information required.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with number of circuits and rating of energy consuming devices; (vii) Type of capacity of storage... including: bilge, ballast, hydraulic, sanitary, compressed air, combustible and flammable liquids, vents...

46 CFR 177.202 - Plans and information required.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with number of circuits and rating of energy consuming devices; (vii) Type of capacity of storage... including: bilge, ballast, hydraulic, sanitary, compressed air, combustible and flammable liquids, vents...

46 CFR 177.202 - Plans and information required.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with number of circuits and rating of energy consuming devices; (vii) Type of capacity of storage... including: bilge, ballast, hydraulic, sanitary, compressed air, combustible and flammable liquids, vents...

Esophageal Spasms

MedlinePlus

... related to swallowing specific substances, such as red wine or extremely hot or cold liquids. The feeling ... High blood pressure Anxiety or depression Drinking red wine or consuming very hot or very cold foods ...

Liquid metal angiography for mega contrast X-ray visualization of vascular network in reconstructing in-vitro organ anatomy.

PubMed

Wang, Qian; Yu, Yang; Pan, Keqin; Liu, Jing

2014-07-01

Visualization on the anatomical vessel networks plays a vital role in the physiological or pathological investigations. However, so far it still remains a big challenge to identify the fine structures of the smallest capillary vessel networks via conventional imaging ways. Here, the room temperature liquid metal angiography was proposed for the first time to generate mega contrast X-ray images for multiscale vasculature mapping. Particularly, gallium was adopted as the room temperature liquid metal contrast agent and infused into the vessels of in vitro pig hearts and kidneys. We scanned the samples under X-ray and compared the angiograms with those obtained via conventional contrast agent--the iohexol. As quantitatively demonstrated by the grayscale histograms and numerical indexes, the contrast of the vessels to the surrounding tissues in the liquid metal angiograms is orders higher than that of the iohexol enhanced images. And the angiogram has reached detailed enough width of 0.1 mm for the tiny vessels, which indicated that the capillaries can be clearly distinguished under the liquid metal enhanced images. Further, with tomography from the micro-CT, we also managed to reconstruct the 3-D structures of the kidney vessels. Tremendous clarity and efficiency of the method over existing approaches have been experimentally clarified. It was disclosed that the usually invisible capillary networks now become distinctively clear in the gallium angiograms. This basic mechanism has generalized purpose and can be extended to a wide spectrum of 3-D computational tomographic areas. It opens a new soft tool for quickly reconstructing high-resolution spatial channel networks for scientific researches as well as engineering practices where complicated and time-consuming resections are no longer a necessity.

Ultrathin zoom lens system based on liquid lenses

NASA Astrophysics Data System (ADS)

Li, Lei; Liu, Chao; Wang, Qiong-Hua

2015-07-01

In this paper, we propose an ultrathin zoom lens system based on liquid lenses. The proposed system consists of an annular folded lens and three electrowetting liquid lenses. The annular folded lens has several concentric surfaces. The annular folded lens is used to get the main power and correct aberrations. The three liquid lenses are used to change the focal length and correct aberration. An analysis of the proposed system is presented along with the design, fabrication, and testing of a prototype. All the elements in the proposed system are very thin, so the system is an ultrathin zoom lens system, which has potential application as lightweight, thin, high-quality imagers for aerospace, consumer, and military applications.

Immersion Cooling of Electronics in DoD Installations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coles, Henry; Herrlin, Magnus

A considerable amount of energy is consumed to cool electronic equipment in data centers. A method for substantially reducing the energy needed for this cooling was demonstrated. The method involves immersing electronic equipment in a non-conductive liquid that changes phase from a liquid to a gas. The liquid used was 3M Novec 649. Two-phase immersion cooling using this liquid is not viable at this time. The primary obstacles are IT equipment failures and costs. However, the demonstrated technology met the performance objectives for energy efficiency and greenhouse gas reduction. Before commercialization of this technology can occur, a root cause analysismore » of the failures should be completed, and the design changes proven.« less

Marketing of patent medicines in the nineteenth century via a corkscrew medicine spoon.

PubMed

Fincham, Jack E

2010-01-01

The C. T. Williamson spoon with manufactured products from a pharmaceutical company engraved on the bowl of the spoon is one of the earliest examples of a manufacturer marketing products via a drug delivery device. The Burroughs, Wellcome and Company, a British corporation using initially an American patented, and later a British patented, Williamson corkscrew spoon marketed British manufactured medicinal products in the U.S. and England to physicians and pharmacists in the late nineteenth and early twentieth century. Other corkscrew spoons were manufactured in this era without product specific notations contained on the spoons. 40 These corkscrew spoons, such as the Williamson and Noe patented apparatuses, helped patients in more easily consuming liquid medications. They also were items potentially favored by physicians and pharmacists for patient's pro- vided liquid medications. Finally, they allowed patients to open corked containers, consume liquid dosage amounts, and hopefully more appropriately comply with necessary regimens in the late nineteenth and early twentieth century. Not surprisingly, Burroughs, Wellcome and Company used the Williamson spoon to successfully market company products to physicians, pharmacists, and patients on several continents.

Rapid epitaxy-free graphene synthesis on silicidated polycrystalline platinum

PubMed Central

Babenko, Vitaliy; Murdock, Adrian T.; Koós, Antal A.; Britton, Jude; Crossley, Alison; Holdway, Philip; Moffat, Jonathan; Huang, Jian; Alexander-Webber, Jack A.; Nicholas, Robin J.; Grobert, Nicole

2015-01-01

Large-area synthesis of high-quality graphene by chemical vapour deposition on metallic substrates requires polishing or substrate grain enlargement followed by a lengthy growth period. Here we demonstrate a novel substrate processing method for facile synthesis of mm-sized, single-crystal graphene by coating polycrystalline platinum foils with a silicon-containing film. The film reacts with platinum on heating, resulting in the formation of a liquid platinum silicide layer that screens the platinum lattice and fills topographic defects. This reduces the dependence on the surface properties of the catalytic substrate, improving the crystallinity, uniformity and size of graphene domains. At elevated temperatures growth rates of more than an order of magnitude higher (120 μm min−1) than typically reported are achieved, allowing savings in costs for consumable materials, energy and time. This generic technique paves the way for using a whole new range of eutectic substrates for the large-area synthesis of 2D materials. PMID:26175062

FSC LCD technology for military and avionics applications

NASA Astrophysics Data System (ADS)

Sarma, Kalluri R.; Schmidt, John; Roush, Jerry

2009-05-01

Field sequential color (FSC) liquid crystal displays (LCD) using a high speed LCD mode and an R, G, B LED backlight, offers a significant potential for lower power consumption, higher resolution, higher brightness and lower cost compared to the conventional R, G, B color filter based LCD, and thus is of interest to various military and avionic display applications. While the DLP projection TVs, and Camcorder LCD view finder type displays using the FSC technology have been introduced in the consumer market, large area direct view LCD displays based on the FSC technology have not reached the commercial market yet. Further, large area FSC LCDs can present unique operational issues in avionic and military environments particularly for operation in a broad temperature range and with respect to its susceptibility for the color breakup image artifact. In this paper we will review the current status of the FSC LCD technology and then discuss the results of our efforts on the FSC LCD technology evaluation for the avionic applications.

CMOS Amperometric ADC With High Sensitivity, Dynamic Range and Power Efficiency for Air Quality Monitoring.

PubMed

Li, Haitao; Boling, C Sam; Mason, Andrew J

2016-08-01

Airborne pollutants are a leading cause of illness and mortality globally. Electrochemical gas sensors show great promise for personal air quality monitoring to address this worldwide health crisis. However, implementing miniaturized arrays of such sensors demands high performance instrumentation circuits that simultaneously meet challenging power, area, sensitivity, noise and dynamic range goals. This paper presents a new multi-channel CMOS amperometric ADC featuring pixel-level architecture for gas sensor arrays. The circuit combines digital modulation of input currents and an incremental Σ∆ ADC to achieve wide dynamic range and high sensitivity with very high power efficiency and compact size. Fabricated in 0.5 [Formula: see text] CMOS, the circuit was measured to have 164 dB cross-scale dynamic range, 100 fA sensitivity while consuming only 241 [Formula: see text] and 0.157 [Formula: see text] active area per channel. Electrochemical experiments with liquid and gas targets demonstrate the circuit's real-time response to a wide range of analyte concentrations.

49 CFR 173.167 - Consumer commodities.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-toxic aerosols only), Class 3 (Packing Group II and III only), Division 6.1 (Packing Group III only... packagings intended to contain liquids must be capable of meeting the pressure differential requirements (75...

Recent Modifications and Validation of QuEChERS-dSPE Coupled to LC-MS and GC-MS Instruments for Determination of Pesticide/Agrochemical Residues in Fruits and Vegetables: Review.

PubMed

Lawal, Abubakar; Wong, Richard Chee Seng; Tan, Guan Huat; Abdulra'uf, Lukman Bola; Alsharif, Ali Mohamed Ali

2018-04-21

Fruits and vegetables constitute a major type of food consumed daily apart from whole grains. Unfortunately, the residual deposits of pesticides in these products are becoming a major health concern for human consumption. Consequently, the outcome of the long-term accumulation of pesticide residues has posed many health issues to both humans and animals in the environment. However, the residues have previously been determined using conventionally known techniques, which include liquid-liquid extraction, solid-phase extraction (SPE) and the recently used liquid-phase microextraction techniques. Despite the positive technological effects of these methods, their limitations include; time-consuming, operational difficulty, use of toxic organic solvents, low selective property and expensive extraction setups, with shorter lifespan of instrumental performances. Thus, the potential and maximum use of these methods for pesticides residue determination has resulted in the urgent need for better techniques that will overcome the highlighted drawbacks. Alternatively, attention has been drawn recently towards the use of quick, easy, cheap, effective, rugged and safe technique (QuEChERS) coupled with dispersive solid-phase extraction (dSPE) to overcome the setback challenges experienced by the previous technologies. Conclusively, the reviewed QuEChERS-dSPE techniques and the recent cleanup modifications justifiably prove to be reliable for routine determination and monitoring the concentration levels of pesticide residues using advanced instruments such as high-performance liquid chromatography, liquid chromatography-mass spectrometry and gas chromatography-mass spectrometry.

Quantitation of sugar content in pyrolysis liquids after acid hydrolysis using high-performance liquid chromatography without neutralization.

PubMed

Johnston, Patrick A; Brown, Robert C

2014-08-13

A rapid method for the quantitation of total sugars in pyrolysis liquids using high-performance liquid chromatography (HPLC) was developed. The method avoids the tedious and time-consuming sample preparation required by current analytical methods. It is possible to directly analyze hydrolyzed pyrolysis liquids, bypassing the neutralization step usually required in determination of total sugars. A comparison with traditional methods was used to determine the validity of the results. The calibration curve coefficient of determination on all standard compounds was >0.999 using a refractive index detector. The relative standard deviation for the new method was 1.13%. The spiked sugar recoveries on the pyrolysis liquid samples were between 104 and 105%. The research demonstrates that it is possible to obtain excellent accuracy and efficiency using HPLC to quantitate glucose after acid hydrolysis of polymeric and oligomeric sugars found in fast pyrolysis bio-oils without neutralization.

Automatic liquid handling for life science: a critical review of the current state of the art.

PubMed

Kong, Fanwei; Yuan, Liang; Zheng, Yuan F; Chen, Weidong

2012-06-01

Liquid handling plays a pivotal role in life science laboratories. In experiments such as gene sequencing, protein crystallization, antibody testing, and drug screening, liquid biosamples frequently must be transferred between containers of varying sizes and/or dispensed onto substrates of varying types. The sample volumes are usually small, at the micro- or nanoliter level, and the number of transferred samples can be huge when investigating large-scope combinatorial conditions. Under these conditions, liquid handling by hand is tedious, time-consuming, and impractical. Consequently, there is a strong demand for automated liquid-handling methods such as sensor-integrated robotic systems. In this article, we survey the current state of the art in automatic liquid handling, including technologies developed by both industry and research institutions. We focus on methods for dealing with small volumes at high throughput and point out challenges for future advancements.

Spoon-to-Cup Fading as Treatment for Cup Drinking in a Child with Intestinal Failure

ERIC Educational Resources Information Center

Groff, Rebecca A.; Piazza, Cathleen C.; Zeleny, Jason R.; Dempsey, Jack R.

2011-01-01

We treated a child with intestinal failure who consumed solids on a spoon but not liquids from a cup. We used spoon-to-cup fading, which consisted of taping a spoon to a cup and then gradually moving the bowl of the spoon closer to the edge of the cup. Spoon-to-cup fading was effective for increasing consumption of liquids from a cup. (Contains 2…

Contributing to marine pollution by washing your face: microplastics in facial cleansers.

PubMed

Fendall, Lisa S; Sewell, Mary A

2009-08-01

Plastics pollution in the ocean is an area of growing concern, with research efforts focusing on both the macroplastic (>5mm) and microplastic (<5mm) fractions. In the 1990 s it was recognized that a minor source of microplastic pollution was derived from liquid hand-cleansers that would have been rarely used by the average consumer. In 2009, however, the average consumer is likely to be using microplastic-containing products on a daily basis, as the majority of facial cleansers now contain polyethylene microplastics which are not captured by wastewater plants and will enter the oceans. Four microplastic-containing facial cleansers available in New Zealand supermarkets were used to quantify the size of the polythelene fragments. Three-quarters of the brands had a modal size of <100 microns and could be immediately ingested by planktonic organisms at the base of the food chain. Over time the microplastics will be subject to UV-degradation and absorb hydrophobic materials such as PCBs, making them smaller and more toxic in the long-term. Marine scientists need to educate the public to the dangers of using products that pose an immediate and long-term threat to the health of the oceans and the food we eat.

Continuously Regenerable Freeze-Out CO2 Control Technology

NASA Technical Reports Server (NTRS)

Fricker, John; Dyer, Chris; Myers, Jeff; Patten, Rich; Paul, Heather

2007-01-01

Carbon dioxide (CO2) removal technology development for portable life support systems (PLSS) has traditionally concentrated in the areas of solid and liquid chemical sorbents and semi-permeable membranes. Most of these systems are too heavy in gravity environments, require prohibitive amounts of consumables for operation on long term planetary missions, or are inoperable on the surface of Mars due to the presence of a CO2 atmosphere. This paper describes the effort performed to mature an innovative CO2 removal technology that meets NASA s planetary mission needs while adhering to the important guiding principles of simplicity, reliability, and operability. A breadboard cryogenic carbon dioxide scrubber (Cryo Scrubber) for a closed loop cryogenic PLSS was developed, designed, and tested, and a conceptual design suitable for a PLSS was developed based on the results of the breadboard testing. The Cryo Scrubber freezes CO2 and other trace contaminants out of expired vent loop gas using cooling available from a liquid oxygen (LOX) based PLSS. The device is continuously regenerable, with solid CO2 being removed from the cold freeze-out surfaces, sublimated, and vented overboard. Duration is limited only by the supply of LOX stored in the PLSS. Simplicity, reliability, and operability are universally important criteria for critical hardware on long duration Lunar or Mars missions. The Cryo Scrubber has no moving parts, requires no additional consumables, and uses no electrical power, contributing to its simplicity and reliability. It is easy to use; no operator action is required to prepare, use, or shut down the Cryo Scrubber, and it does not require charging or regeneration. The versatility of the concept allows for operation on earth, the moon, and Mars, and in microgravity.

Rural-Urban Differences in Consumer Governance at Community Health Centers

PubMed Central

Wright, David Bradley

2017-01-01

Context Community health centers (CHCs) are primary care clinics that serve mostly low-income patients in rural and urban areas. They are required to be governed by a consumer majority. What little is known about the structure and function of these boards in practice, suggests that CHC boards in rural areas may look and act differently than CHC boards in urban areas. Purpose To identify differences in the structure and function of consumer governance at CHCs in rural and urban areas. Methods Semi-structured telephone interviews were conducted with 30 CHC board members from 14 different states. Questions focused on board members’ perceptions of board composition and the role of consumers on the board. Findings CHCs in rural areas are more likely to have representative boards, are better able to convey confidence in the organization, and are better able to assess community needs than CHCs in urban areas. However, CHCs in rural areas often have problems achieving objective decision-making, and may have fewer means for objectively evaluating quality of care due to the lack of patient board member anonymity. Conclusions Consumer governance is implemented differently in rural and urban communities, and the advantages and disadvantages in each setting are unique. PMID:23551642

Consumer behaviour survey for assessing exposure from consumer products: a feasibility study.

PubMed

Schneider, Klaus; Recke, Selina; Kaiser, Eva; Götte, Sebastian; Berkefeld, Henrike; Lässig, Juliane; Rüdiger, Thomas; Lindtner, Oliver; Oltmanns, Jan

2018-05-23

Evaluating chemical exposures from consumer products is an essential part of chemical safety assessments under REACH and may also be important to demonstrate compliance with consumer product legislation. Modelling of consumer exposure needs input information on the substance (e.g. vapour pressure), the product(s) containing the substance (e.g. concentration) and on consumer behaviour (e.g. use frequency and amount of product used). This feasibility study in Germany investigated methods for conducting a consumer survey in order to identify and retrieve information on frequency, duration, use amounts and use conditions for six example product types (four mixtures, two articles): hand dishwashing liquid, cockpit spray, fillers, paints and lacquers, shoes made of rubber or plastic, and ball-pens/pencils. Retrospective questionnaire methods (Consumer Product Questionnaire (CPQ), and Recall-Foresight Questionnaire (RFQ)) as well as protocol methods (written reporting by participants and video documentation) were used. A combination of retrospective questionnaire and written protocol methods was identified to provide valid information in a resource-efficient way. Relevant information, which can readily be used in exposure modelling, was obtained for all parameters and product types investigated. Based on the observations in this feasibility study, recommendations are given for designing a large consumer survey.

Sugars and adiposity: the long-term effects of consuming added and naturally occurring sugars in foods and in beverages.

PubMed

Lee, A K; Chowdhury, R; Welsh, J A

2015-10-01

The aim of this study was to determine if the association with adiposity varies by the type (added vs. naturally occurring) and form (liquid vs. solid) of dietary sugars consumed. Data from the 10-year National Heart, Lung, and Blood Institute (NHLBI) Growth and Health Study ( n  = 2,021 girls aged 9-10 years at baseline; n  = 5,156 paired observations) were used. Using mixed linear models, 1-year changes in sugar intake, body mass index z -score (BMI z ) and waist circumference (WC) were assessed. The results showed mean daily added sugar (AS) intake: 10.3 tsp (41 g) liquid; 11.6 tsp (46 g) solid and naturally occurring sugar intake: 2.6 tsp (10 g) liquid; 2.2 tsp (9 g) solid. Before total energy adjustment, each additional teaspoon of liquid AS was associated with a 0.222-mm increase in WC ( p  = 0.0003) and a 0.002 increase in BMI z ( p  = 0.003). Each teaspoon of solid AS was associated with a 0.126-mm increase in WC ( p  = 0.03) and a 0.001 increase in BMI z ( p  = 0.03). Adjusting for total energy, this association was maintained only between liquid AS and WC among all and between solid AS and WC among those overweight/obese only. There was no significant association with naturally occurring sugar. These findings demonstrate to suggest a positive association between AS intake (liquid and solid) and BMI that is mediated by total energy intake and an association with WC that is independent of it.

Sugars and adiposity: the long‐term effects of consuming added and naturally occurring sugars in foods and in beverages

PubMed Central

Lee, A. K.; Chowdhury, R.

2015-01-01

Summary Objective The aim of this study was to determine if the association with adiposity varies by the type (added vs. naturally occurring) and form (liquid vs. solid) of dietary sugars consumed. Methods Data from the 10‐year National Heart, Lung, and Blood Institute (NHLBI) Growth and Health Study (n = 2,021 girls aged 9–10 years at baseline; n = 5,156 paired observations) were used. Using mixed linear models, 1‐year changes in sugar intake, body mass index z‐score (BMIz) and waist circumference (WC) were assessed. Results The results showed mean daily added sugar (AS) intake: 10.3 tsp (41 g) liquid; 11.6 tsp (46 g) solid and naturally occurring sugar intake: 2.6 tsp (10 g) liquid; 2.2 tsp (9 g) solid. Before total energy adjustment, each additional teaspoon of liquid AS was associated with a 0.222‐mm increase in WC (p = 0.0003) and a 0.002 increase in BMIz (p = 0.003). Each teaspoon of solid AS was associated with a 0.126‐mm increase in WC (p = 0.03) and a 0.001 increase in BMIz (p = 0.03). Adjusting for total energy, this association was maintained only between liquid AS and WC among all and between solid AS and WC among those overweight/obese only. There was no significant association with naturally occurring sugar. Conclusions These findings demonstrate to suggest a positive association between AS intake (liquid and solid) and BMI that is mediated by total energy intake and an association with WC that is independent of it. PMID:27774248

The influences of consumer characteristics on the amount of rice consumption

NASA Astrophysics Data System (ADS)

Supriana, T.; Pane, TC

2018-02-01

This study aimed to analyze the characteristics of rice consumers and the influences of consumer characteristics on the amount of rice consumption. The research areas were determined purposively in the sub-districts with the most significant population in Medan City. The analytical methods used were descriptive and multiple linear regression analysis. The results showed that consumers in the study areas have various characteristics, concerning age, income, family size, health, and education. Simultaneously, characteristics of rice consumers have the significant effect on the amount of rice consumed. Partially, age and the number of family members have the significant effect on the amount of rice consumed. The implications of this research are, need different policies toward consumers of rice based on their income strata. Rice policies cannot be generalized.

Developing Ultra-small Scale Mechanical Testing Methods and Microstructural Investigation Procedures for Irradiated Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hosemann, Peter; Kaoumi, Djamel

Nuclear materials are an essential aspect of nuclear engineering. While great effort is spent on designing more advanced reactors or enhancing a reactor’s safety, materials have been the bottleneck of most new developments. The designs of new reactor concepts are driven by neutronic and thermodynamic aspects, leading to unusual coolants (liquid metal, liquid salt, gases), higher temperatures, and higher radiation doses than conventional light water reactors have. However, any (nuclear) engineering design must consider the materials used in the anticipated application in order to ever be realized. Designs which may look easy, simple and efficient considering thermodynamics or neutronic aspectsmore » can show their true difficulty in the materials area, which then prevents them from being deployed. In turn, the materials available are influencing the neutronic and thermodynamic designs and therefore must be considered from the beginning, requiring close collaborations between different aspects of nuclear engineering. If a particular design requires new materials, the licensing of the reactor must be considered, but licensing can be a costly and time consuming process that results in long lead times to realize true materials innovation.« less

Increase The Sugar Concentration of The Solution Sugar by Reverse Osmotic Membrane

NASA Astrophysics Data System (ADS)

Redjeki, S.; Hapsari, N.; Iriani

2018-01-01

Sugar is one of the basic needs of people and food and drink industry. As technology advances and the demand for efficient usage of sugar rises, crystal sugar is seen as less advantageous than liquid sugar. If sugar is always dissolved in water before use, then it will be more efficient and practical for consumers to use sugar in liquid form than in crystal form. Other than that, liquid sugar is also attractive to consumers because it is economical, hygienic, instantly soluble in hot and cold water, fresher and longer-lasting, able to thicken and enrich the texture of foods and drinks, and functions as sweetener, syrup, and flavor enhancer. Liquid sugar is also more beneficial for sugar producers because of simpler production process, cheaper production cost, and similar yield with no extra cost. In sugar production, separation process is found in most of its stages and therefore the use of membrane technology for separating solute and water content has a good potential. In this research, water content reduction of sugar solution was done in order to increase the sugar concentration of the solution. The parameters of this research were 4%, 5%, and 6% starting concentration of sugar solution; 20, 40, and 60 minutes of process time; and 85 and 60 PSI ΔP. The best result was acquired on 4% starting concentration, 60 PSI ΔP, and 60 minutes process time.

Unattended reaction monitoring using an automated microfluidic sampler and on-line liquid chromatography.

PubMed

Patel, Darshan C; Lyu, Yaqi Fara; Gandarilla, Jorge; Doherty, Steve

2018-04-03

In-process sampling and analysis is an important aspect of monitoring kinetic profiles and impurity formation or rejection, both in development and during commercial manufacturing. In pharmaceutical process development, the technology of choice for a substantial portion of this analysis is high-performance liquid chromatography (HPLC). Traditionally, the sample extraction and preparation for reaction characterization have been performed manually. This can be time consuming, laborious, and impractical for long processes. Depending on the complexity of the sample preparation, there can be variability introduced by different analysts, and in some cases, the integrity of the sample can be compromised during handling. While there are commercial instruments available for on-line monitoring with HPLC, they lack capabilities in many key areas. Some do not provide integration of the sampling and analysis, while others afford limited flexibility in sample preparation. The current offerings provide a limited number of unit operations available for sample processing and no option for workflow customizability. This work describes development of a microfluidic automated program (MAP) which fully automates the sample extraction, manipulation, and on-line LC analysis. The flexible system is controlled using an intuitive Microsoft Excel based user interface. The autonomous system is capable of unattended reaction monitoring that allows flexible unit operations and workflow customization to enable complex operations and on-line sample preparation. The automated system is shown to offer advantages over manual approaches in key areas while providing consistent and reproducible in-process data. Copyright © 2017 Elsevier B.V. All rights reserved.

Rapid characterisation of Klebsiella oxytoca isolates from contaminated liquid hand soap using mass spectrometry, FTIR and Raman spectroscopy.

PubMed

Dieckmann, Ralf; Hammerl, Jens Andre; Hahmann, Hartmut; Wicke, Amal; Kleta, Sylvia; Dabrowski, Piotr Wojciech; Nitsche, Andreas; Stämmler, Maren; Al Dahouk, Sascha; Lasch, Peter

2016-06-23

Microbiological monitoring of consumer products and the efficiency of early warning systems and outbreak investigations depend on the rapid identification and strain characterisation of pathogens posing risks to the health and safety of consumers. This study evaluates the potential of three rapid analytical techniques for identification and subtyping of bacterial isolates obtained from a liquid hand soap product, which has been recalled and reported through the EU RAPEX system due to its severe bacterial contamination. Ten isolates recovered from two bottles of the product were identified as Klebsiella oxytoca and subtyped using matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI TOF MS), near-infrared Fourier transform (NIR FT) Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy. Comparison of the classification results obtained by these phenotype-based techniques with outcomes of the DNA-based methods pulsed-field gel electrophoresis (PFGE), multi-locus sequence typing (MLST) and single nucleotide polymorphism (SNP) analysis of whole-genome sequencing (WGS) data revealed a high level of concordance. In conclusion, a set of analytical techniques might be useful for rapid, reliable and cost-effective microbial typing to ensure safe consumer products and allow source tracking.

Multiclass methods for the analysis of antibiotic residues in milk by liquid chromatography coupled to mass spectrometry: A review.

PubMed

Rossi, Rosanna; Saluti, Giorgio; Moretti, Simone; Diamanti, Irene; Giusepponi, Danilo; Galarini, Roberta

2018-02-01

Milk is an important and beneficial food from a nutritional point of view, being an indispensable source of high quality proteins. Furthermore, it is a raw material for many dairy products, such as yoghurt, cheese, cream etc. Before reaching consumers, milk goes through production, processing and circulation. Each step involves potentially unsafe factors, such as chemical contamination that can affect milk quality. Antibiotics are widely used in veterinary medicine for dry cow therapy and mastitis treatment in lactating cows, which can cause the presence of antimicrobial residues in milk. In order to ensure consumers' safety, milk is analyzed to make sure that the fixed Maximum Residue Limits (MRLs) for antibiotics are not exceeded. Multiclass methods can monitor more drug classes through a single analysis, so they are faster, less time-consuming and cheaper than traditional methods (single-class); this aspect is particularly important for milk, which is a highly perishable food. Nevertheless, multiclass methods for veterinary drug residues in foodstuffs are real analytical challenges. This article reviews the major multiclass methods published for the determination of antibiotic residues in milk by liquid chromatography coupled to mass spectrometry, with a special focus on sample preparation approaches.

Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile-based extraction with dispersive liquid-liquid microextraction followed by high-performance liquid chromatography.

PubMed

Ruan, Chunqiang; Zhao, Xiang; Liu, Chenglan

2015-09-01

In this study, a simple and low-organic-solvent-consuming method combining an acetonitrile-partitioning extraction procedure followed by "quick, easy, cheap, effective, rugged and safe" cleanup with ionic-liquid-based dispersive liquid-liquid microextraction and high-performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic-liquid-based dispersive liquid-liquid microextraction was performed using the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid-liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Chemical Composition of Maple Syrup

ERIC Educational Resources Information Center

Ball, David W.

2007-01-01

Maple syrup is one of several high-sugar liquids that humans consume. However, maple syrup is more than just a concentrated sugar solution. Here, we review the chemical composition of maple syrup. (Contains 4 tables and 1 figure.)

Linking Intertidal and Subtidal Food Webs: Consumer-Mediated Transport of Intertidal Benthic Microalgal Carbon

PubMed Central

Kang, Chang-Keun; Park, Hyun Je; Choy, Eun Jung; Choi, Kwang-Sik; Hwang, Kangseok; Kim, Jong-Bin

2015-01-01

We examined stable carbon and nitrogen isotope ratios for a large variety of consumers in intertidal and subtidal habitats, and their potential primary food sources [i.e., microphytobenthos (MPB), phytoplankton, and Phragmites australis] in a coastal bay system, Yeoja Bay of Korea, to test the hypothesis that the transfer of intertidal MPB-derived organic carbon to the subtidal food web can be mediated by motile consumers. Compared to a narrow δ13C range (−18 to −16‰) of offshore consumers, a broad δ13C range (−18 to −12‰) of both intertidal and subtidal consumers indicated that 13C-enriched sources of organic matter are an important trophic source to coastal consumers. In the intertidal areas, δ13C of most consumers overlapped with or was 13C-enriched relative to MPB. Despite the scarcity of MPB in the subtidal, highly motile consumers in subtidal habitat had nearly identical δ13C range with many intertidal foragers (including crustaceans and fish), overlapping with the range of MPB. In contrast, δ13C values of many sedentary benthic invertebrates in the subtidal areas were similar to those of offshore consumers and more 13C-depleted than motile foragers, indicating high dependence on phytoplankton-derived carbon. The isotopic mixing model calculation confirms that the majority of motile consumers and also some of subtidal sedentary ones depend on intertidal MPB for more than a half of their tissue carbon. Finally, although further quantitative estimates are needed, these results suggest that direct foraging by motile consumers on intertidal areas, and thereby biological transport of MPB-derived organic carbon to the subtidal areas, may provide important trophic connection between intertidal production and the nearshore shallow subtidal food webs. PMID:26448137

Shopping list development and use of advertisements' pre-store food-buying practices within different socio-economic status areas in South Africa.

PubMed

Duffett, Rodney Graeme; Foster, Crystal

2017-01-01

The purpose of this paper is to determine whether there is a difference in the development of shopping lists and use of advertisements as pre-store food-buying practices in terms of planned shopping by South African consumers who dwell in different socio-economic status (SES) areas. The paper also considers the influence of shopper and socio-demographic characteristics on pre-store food-buying practices in a developing country. A self-administered questionnaire was used to survey 1 200 consumers in retail stores in low, middle and high SES areas in South Africa. A generalised linear model was employed for the statistical analysis of pre-store food-buying practices within the SES area groups in a developing country. South African consumers that reside in high SES area displayed the largest of shopping list development, while consumers who dwell in low SES areas showed the highest incidence of advertisement usage. Several shopper and socio-demographic characteristics were also found to have an influence on pre-store food-buying practices in different SES areas in South Africa. A qualitative approach would offer a deeper understanding of consumers' pre-store food shopping predispositions as opposed to the quantitative approach, which was adopted for this study. A longitudinal design would also provide a more extensive representation of pre-store food shopping practices over a longer time frame than cross-sectional research. The survey was conducted on Saturdays, whereas consumers who shop during the week may have different shopping and socio-demographic characteristics. Astute food brands, marketers and grocery stores could use the findings of this study to assist with their marketing efforts that they direct at consumers in different SES areas in South Africa and other developing countries. The findings of this study may assist consumers in developing countries, especially those who reside in low SES areas, with food-buying strategies to reduce food costs, make wiser purchase decisions and reduce shopping. No study (to the best of the researchers' knowledge) has considered shopping list development and use of advertisements' pre-store food-buying practices in different SES areas in a developing country. Furthermore, there is a dearth of research analysing shopper and socio-demographic characteristics in relation to pre-store food-buying practices among different SES areas in developing and developed countries.

Short-term hunger intensity changes following ingestion of a meal replacement bar for weight control.

PubMed

Rothacker, Dana Q; Watemberg, Salo

2004-05-01

Meal replacement products for weight loss are popular and safe for most unsupervised consumers desiring to lose weight. Previously we reported that the thickness of meal replacement diet shakes had a direct and significant effect on hunger intensity during the first 2 h and that hunger intensity scores for liquid meal replacements were significantly below baseline for 3 h following consumption (Mattes & Rothacker, 2001) This study uses the same protocol to investigate meal replacement bars designed for overweight consumers. Subjects were prescreened to include only those that normally ate breakfast and liked chocolate. The bar used in this study contained 250 calories (about 30 more than most liquid diet shakes), 4 g dietary fiber, 14 g protein and 8 g fat. Subjects were instructed to consume the entire bar with a glass of water following an overnight fast when they would normally consume their first meal of the day and to assess their hunger on a 1 (not hungry at all) to 9 (as hungry as I have ever felt) scale before consumption, immediately after and hourly for 6 h (only on typical weekdays). Similar assessments were made for the perception of stomach fullness (1=empty, 9=extremely full), strength of the desire to eat (1=no desire, 9=extremely strong) and thirst (1=not at all thirsty, 9=extremely thirsty). One-hundred and eight subjects (23 male and 85 female) completed the study. No gender satiety differences were found. Hunger ratings and desire to eat remained significantly below baseline for 5 h following consumption. Stomach fullness scores were significantly above baseline for 5 h. Thirst scores were significantly below baseline for 3 h. In conclusion, although the meal replacement diet bars contained only 30 additional calories than liquids, they provided an additional 2 h of hunger suppression from baseline that may have an impact on overall weightloss success. These results support superior short-term hunger control with solid meal replacements.

5 CFR 591.201 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Commonwealth of the Northern Mariana Islands, which is part of the Guam/CNMI COLA area. Consumer Expenditure... the BLS survey of the change of consumer prices over time. Cost-of-living allowance (COLA) means an... allowance area means a geographic area for which OPM has authorized a COLA. COLA areas are listed in § 591...

5 CFR 591.201 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commonwealth of the Northern Mariana Islands, which is part of the Guam/CNMI COLA area. Consumer Expenditure... the BLS survey of the change of consumer prices over time. Cost-of-living allowance (COLA) means an... allowance area means a geographic area for which OPM has authorized a COLA. COLA areas are listed in § 591...

5 CFR 591.201 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commonwealth of the Northern Mariana Islands, which is part of the Guam/CNMI COLA area. Consumer Expenditure... the BLS survey of the change of consumer prices over time. Cost-of-living allowance (COLA) means an... allowance area means a geographic area for which OPM has authorized a COLA. COLA areas are listed in § 591...

5 CFR 591.201 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commonwealth of the Northern Mariana Islands, which is part of the Guam/CNMI COLA area. Consumer Expenditure... the BLS survey of the change of consumer prices over time. Cost-of-living allowance (COLA) means an... allowance area means a geographic area for which OPM has authorized a COLA. COLA areas are listed in § 591...

Consumer Education: Consumer Education I and Consumer Education II. Course Objectives, Content Analysis, Supporting Objectives and Content Generalizations.

ERIC Educational Resources Information Center

Crow, Karen, Comp.; Martin, Joan, Ed.

Consumer education course objectives, content analysis, supporting objectives, and content generalizations are presented in this teacher's guide for Consumer Education 1 and 2 for the San Diego Unified School District. Course objectives are aimed at several areas of consumer and family studies: consumer education, cultural awareness, human…

Domain independence and stability in young and older adults' discounting of delayed rewards

PubMed Central

Jimura, Koji; Myerson, Joel; Hilgard, Joseph; Keighley, Julia; Braver, Todd S.; Green, Leonard

2011-01-01

Individual discounting rates for different types of delayed reward are typically assumed to reflect a single, underlying trait of impulsivity. Recently, we showed that discounting rates are orders of magnitude steeper for directly consumable liquid rewards than for monetary rewards (Jimura et al. 2009), raising the question of whether discounting rates for different types of reward covary at the individual level. Accordingly, the present study examined the relation between discounting of hypothetical money and real liquid rewards in young adults (Experiment 1) and older adults (Experiment 2). At the group level, young adults discounted monetary rewards more steeply than the older adults, but the reverse pattern was observed with liquid rewards. At the individual level, the rates at which young and older participants discounted each reward type were stable over a two- to fifteen-week interval (rs >.70), but there was no significant correlation between the rates at which they discounted the two reward types. These results suggest that although similar decision-making processes may underlie the discounting of different types of rewards, the rates at which individuals discount money and directly consumable rewards may reflect separate, stable traits, rather than a single trait of impulsivity. PMID:21550384

Parental Self-Feeding Effects on Parental Care Levels and Time Allocation in Palestine Sunbirds

PubMed Central

Markman, Shai

2014-01-01

The trade-off between parents feeding themselves and their young is an important life history problem that can be considered in terms of optimal behavioral strategies. Recent studies on birds have tested how parents allocate the food between themselves and their young. Until now the effect of food consumption by parent birds on their food delivery to their young as well as other parental activities has rarely been studied. I have previously shown that parent Palestine sunbirds (Nectarinia osea) will consume nectar and liquidized arthropods from artificial feeders. However, they will only feed their young with whole arthropods. This provided a unique opportunity to experimentally manipulate the food eaten by parents independent of that fed to their offspring. Here, I hypothesized that parents invest in their current young according to the quality of food that they themselves consume. Breeding pairs with two or three nestlings were provided with feeders containing water (control), sucrose solution (0.75 mol) or liquidized mealworms mixed with sucrose solution (0.75 mol). As food quality in feeders increased (from water up to liquidized mealworms mixed with sucrose solution): 1) Parents (especially females) increased their food delivery of whole arthropod prey to their young. 2) Only males increased their nest guarding effort. Nestling food intake and growth rate increased with increasing food quality of parents and decreasing brood size. These results imply that increasing the nutrient content of foods consumed by parent sunbirds allow them to increase the rate at which other foods are delivered to their young and to increase the time spent on other parental care activities. PMID:25474620

78 FR 9020 - Wireline Competition Bureau Seeks Further Comment on Specific Issues Related to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-07

... adjust the Remote Areas Fund usage allowance requirement to reflect consumer behavior, and if so, how... files, audio format), send an email to [email protected] or call the Consumer & Governmental Affairs Bureau... issues relating to the implementation of the Remote Areas Fund as a portable consumer subsidy program, as...

49 CFR 172.604 - Emergency response telephone number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... vehicle. Carbon dioxide, solid. Castor bean. Castor flake. Castor meal. Castor pomace. Consumer commodity. Dry ice. Engines, internal combustion. Fish meal, stabilized. Fish scrap, stabilized. Refrigerating machine. Vehicle, flammable gas powered. Vehicle, flammable liquid powered. Wheelchair, electric. (3...

Communicating food safety, authenticity and consumer choice. Field experiences.

PubMed

Syntesa, Heiner Lehr

2013-04-01

The paper reviews patented and non-patented technologies, methods and solutions in the area of food traceability. It pays special attention to the communication of food safety, authenticity and consumer choice. Twenty eight recent patents are reviewed in the areas of (secure) identification, product freshness indicators, meat traceability, (secure) transport of information along the supply chain, country/region/place of origin, automated authentication, supply chain management systems, consumer interaction systems. In addition, solutions and pilot projects are described in the areas of Halal traceability, traceability of bird's nests, cold chain management, general food traceability and other areas.

Liquid Crystal Colloids

NASA Astrophysics Data System (ADS)

Smalyukh, Ivan I.

2018-03-01

Colloids are abundant in nature, science, and technology, with examples ranging from milk to quantum dots and the colloidal atom paradigm. Similarly, liquid crystal ordering is important in contexts ranging from biological membranes to laboratory models of cosmic strings and liquid crystal displays in consumer devices. Some of the most exciting recent developments in both of these soft matter fields emerge at their interface, in the fast-growing research arena of liquid crystal colloids. Mesoscale self-assembly in such systems may lead to artificial materials and to structures with emergent physical behavior arising from patterning of molecular order and nano- or microparticles into precisely controlled configurations. Liquid crystal colloids show exceptional promise for new discovery that may impinge on composite material fabrication, low-dimensional topology, photonics, and so on. Starting from physical underpinnings, I review the state of the art in this fast-growing field, with a focus on its scientific and technological potential.

Layered Thermal Insulation Systems for Industrial and Commercial Applications

NASA Technical Reports Server (NTRS)

Fesmire, James E.

2015-01-01

From the high performance arena of cryogenic equipment, several different layered thermal insulation systems have been developed for industrial and commercial applications. In addition to the proven areas in cold-work applications for piping and tanks, the new Layered Composite Insulation for Extreme Environments (LCX) has potential for broader industrial use as well as for commercial applications. The LCX technology provides a unique combination of thermal, mechanical, and weathering performance capability that is both cost-effective and enabling. Industry applications may include, for example, liquid nitrogen (LN2) systems for food processing, liquefied natural gas (LNG) systems for transportation or power, and chilled water cooling facilities. Example commercial applications may include commercial residential building construction, hot water piping, HVAC systems, refrigerated trucks, cold chain shipping containers, and a various consumer products. The LCX system is highly tailorable to the end-use application and can be pre-fabricated or field assembled as needed. Product forms of LCX include rigid sheets, semi-flexible sheets, cylindrical clam-shells, removable covers, or flexible strips for wrapping. With increasing system control and reliability requirements as well as demands for higher energy efficiencies, thermal insulation in harsh environments is a growing challenge. The LCX technology grew out of solving problems in the insulation of mechanically complex cryogenic systems that must operate in outdoor, humid conditions. Insulation for cold work includes equipment for everything from liquid helium to chilled water. And in the middle are systems for LNG, LN2, liquid oxygen (LO2), liquid hydrogen (LH2) that must operate in the ambient environment. Different LCX systems have been demonstrated for sub-ambient conditions but are capable of moderately high temperature applications as well.

Synthetic polymers blend used in the production of high activated carbon for pesticides removals from liquid phase.

PubMed

Belo, Cristóvão Ramiro; Cansado, Isabel Pestana da Paixão; Mourão, Paulo Alexandre Mira

2017-02-01

For the activated carbon (AC) production, we used the most common industrial and consumer solid waste, namely polyethyleneterephthalate (PET), alone or blended with other synthetic polymer such polyacrylonitrile (PAN). By mixing PET, with PAN, an improvement in the yield of the AC production was found and the basic character and some textural and chemical properties were enhanced. The PET-PAN mixture was subjected to carbonisation, with a pyrolysis yield of 31.9%, between that obtained with PET (16.9%) or PAN (42.6%) separately. The AC revealed a high surface area (1400, 1230 and 1117 m 2  g -1 ) and pore volume (0.46, 0.56 and 0.50 cm 3  g -1 ), respectively, for PET, PAN and PET-PAN precursors. Selected ACs were successfully tested for 4-chloro-2-methylphenoxyacetic acid (MCPA) and diuron removal from the liquid phase, showing a higher adsorption capacity (1.7 and 1.2 mmol g -1 , respectively, for MCPA and diuron) and good fits with the Langmuir (PET) and Freundlich equation (PAN and PET-PAN blend). With MCPA, the controlling factor to the adsorption capacity was the porous volume and the average pore size. Concerning diuron, the adsorption was controlled essentially by the external diffusion. A remarkable result is the use of different synthetic polymers wastes, as precursors for the production of carbon materials, with high potential application on the pesticides removals from the liquid phase.

Release of airborne particles and Ag and Zn compounds from nanotechnology-enabled consumer sprays: Implications for inhalation exposure

NASA Astrophysics Data System (ADS)

Calderón, Leonardo; Han, Taewon T.; McGilvery, Catriona M.; Yang, Letao; Subramaniam, Prasad; Lee, Ki-Bum; Schwander, Stephan; Tetley, Teresa D.; Georgopoulos, Panos G.; Ryan, Mary; Porter, Alexandra E.; Smith, Rachel; Chung, Kian Fan; Lioy, Paul J.; Zhang, Junfeng; Mainelis, Gediminas

2017-04-01

The increasing prevalence and use of nanotechnology-enabled consumer products have increased potential consumer exposures to nanoparticles; however, there is still a lack of data characterizing such consumer exposure. The research reported here investigated near-field airborne exposures due to the use of 13 silver (Ag)-based and 5 zinc (Zn)-based consumer sprays. The products were sprayed into a specially designed glove box, and all products were applied with equal spraying duration and frequency. Size distribution and concentration of the released particles were assessed using a Scanning Mobility Particle Sizer and an Aerodynamic Particle Sizer. Inductively coupled plasma mass spectrometry (ICP-MS) was used to investigate the presence of metals in all investigated products. Spray liquids and airborne particles from select products were examined using transmission electron microscopy (TEM) and Energy Dispersive X-ray Spectroscopy (EDS). We found that all sprays produced airborne particles ranging in size from nano-sized particles (<100 nm) to coarse particles (>2.5 μm); however, there was a substantial variation in the released particle concentration depending on a product. The total aerosol mass concentration was dominated by the presence of coarse particles, and it ranged from ∼30 μg/m3 to ∼30,000 μg/m3. The TEM verified the presence of nanoparticles and their agglomerates in liquid and airborne states. The products were found to contain not only Ag and Zn compounds - as advertised on the product labeling - but also a variety of other metals including lithium, strontium, barium, lead, manganese and others. The results presented here can be used as input to model population exposures as well as form a basis for human health effects studies due to the use nanotechnology-enabled products.

Consumer's Choice. A Manual of Supplemental Consumer Education Teaching Strategies. Developed for Grades K-4.

ERIC Educational Resources Information Center

Allegheny Intermediate Unit, Pittsburgh, PA.

Designed for grades K-4, this manual contains suggested teaching strategies for infusing consumer education into the academic areas of art, language arts, mathematics, science/health, and social studies. Each of the twenty to thirty learning activities provided for each of the academic areas is based on competencies related to one of four…

China Country Analysis Brief

EIA Publications

2015-01-01

China is the world's most populous country with a fast-growing economy that has led it to be the largest energy consumer and producer in the world. Rapidly increasing energy demand, especially for petroleum and other liquids, has made China influential in world energy markets.

40 CFR 59.412 - Incorporations by reference.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) NATIONAL VOLATILE ORGANIC COMPOUND EMISSION STANDARDS FOR CONSUMER AND COMMERCIAL PRODUCTS National Volatile Organic Compound Emission Standards for Architectural Coatings § 59.412 Incorporations by... 19428-2959. (1) ASTM Method C 1315-95, Standard Specification for Liquid Membrane-Forming Compounds...

40 CFR 59.412 - Incorporations by reference.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) NATIONAL VOLATILE ORGANIC COMPOUND EMISSION STANDARDS FOR CONSUMER AND COMMERCIAL PRODUCTS National Volatile Organic Compound Emission Standards for Architectural Coatings § 59.412 Incorporations by... 19428-2959. (1) ASTM Method C 1315-95, Standard Specification for Liquid Membrane-Forming Compounds...

Collection of liquid from below-ground location

DOEpatents

Phillips, Steven J.; Alexander, Robert G.

1995-01-01

A method of retrieving liquid from a below-ground collection area by permitting gravity flow of the liquid from the collection area to a first closed container; monitoring the level of the liquid in the closed container; and after the liquid reaches a given level in the first closed container, transferring the liquid to a second closed container disposed at a location above the first closed container, via a conduit, by introducing into the first closed container a gas which is substantially chemically inert with respect to the liquid, the gas being at a pressure sufficient to propel the liquid from the first closed container to the second closed container.

Avoiding Consumer Frauds and Misrepresentations. A Learning Module.

ERIC Educational Resources Information Center

Garman, E. Thomas; Monroe, Sarah D.

Focusing on avoiding consumer frauds and misrepresentations, this document is one in a series of three consumer education modules developed to educate individual adult consumers in important areas of consumer affairs. An introductory section provides an overview of the module contents, suggested approaches for using the module, and suggestions for…

A study of waste liquid crystal display generation in mainland China.

PubMed

Liu, Zhifeng; Xu, Zeying; Huang, Haihong; Li, Bingbing

2016-01-01

The generation of liquid crystal display waste is becoming a serious social problem. Predicting liquid crystal display waste status is the foundation for establishing a recycling network; however, the difficulty in predicting liquid crystal display waste quantity lies in data mining. In order to determine the quantity and the distribution of liquid crystal display waste in China, the four top-selling liquid crystal display products (liquid crystal display TVs, desktop PCs, notebook PCs, and mobile phones) were selected as study objects. Then, the extended logistic model and market supply A method was used to predict the quantity of liquid crystal display waste products. Moreover, the distribution of liquid crystal display waste products in different regions was evaluated by examining the consumption levels of household equipment. The results revealed that the quantity of waste liquid crystal displays would increase rapidly in the next decade. In particular, the predicted quantity of waste liquid crystal displays would rise to approximately 4.262 × 10(9) pieces in 2020, and the total display area (i.e. the surface area of liquid crystal display panels) of waste liquid crystal displays would reach 5.539 × 10(7) m(2). The prediction on the display area of waste liquid crystal display TVs showed that it would account for 71.5% of the total display area by 2020. Meanwhile, the quantity of waste mobile phones would significantly grow, increasing 5.8 times from 2012 to 2020. In terms of distribution, Guangdong is the top waste liquid crystal display-generating province in China, followed by Jiangsu, Shandong, Henan, Zhejiang, and Sichuan. Considering its regional characteristics, Guangdong has been proposed to be the most important location of the recycling network. © The Author(s) 2015.

'Take small steps to go a long way' consumer involvement in research into complementary and alternative therapies.

PubMed

Paterson, Charlotte

2004-08-01

This investigation set out to learn about consumer involvement in complementary medicine research from those who have experience of practice in this area. A literature search was combined with written and oral responses from key people and organisations in the UK. Letter or e-mail contact was made with 59 key people and organisations and 43 people responded. Eighteen respondents were interviewed. The overall level of consumer involvement was low but participants provided examples of experiences of consumer involvement in commissioning, designing, carrying out, and disseminating research. Clear roles and tasks and a consumer-friendly research environment, enabled consumers to contribute, gain confidence, and gradually widen their areas of involvement. There appears to be no single 'right way' for researchers and consumers to work together, but with experience and mutual respect researchers became increasingly enthusiastic about the value of the consumer perspective. As one consumer said: 'You have to take small steps to go a long way'.

Ecologization of water-land property matters on the territory of the Tom lower course

NASA Astrophysics Data System (ADS)

Popov, V. K.; Kozina, M. V.; Levak, Yu Yu; Shvagrukova, E. V.

2016-03-01

In the present paper the water-land property complex is considered as a strategic resource of the city development. The formulated question is expounded through the example of water-land property complex usage on the territory of the Tom lower course for land-use planning and developing the systems of water recourses management and land tenure. Consequences of liquid radioactive waste (LRW) landfilling are investigated in terms of arable farming. Also, forming a water budget of the soils spread on the area of the Tomsk underground water supply cone of depression and its role in the development of agricultural industry are studied. The main aspect of the analysis is the incorporation of social, economic, and ecological requirements for the system of life-supporting branches of municipal economy and social services. As far as the system of land tax payments plays an important role in land property complex management, the common issues and tendencies are specified in the paper. These problems are concerned with the inadequate incorporation of an ecological constituent in the methods of cadastral valuation of lands, as well as the situation of the narrow area of its results usage in the Russian Federation. Natural factors (hydrological, territorial, geological (geomorphologic) territory conditions) are combined by the authors into a special group. These factors should be reflected in the results of cadastral valuation. Also, in order to protect the interests of water consumers, it is offered to establish the Water Consumers Association based on the international experience of such countries as Spain and Uzbekistan.

[Partynight outcome].

PubMed

Wunder, Anne Frederike; Oelckers, Michael; Lock, Guntram

2015-10-01

An 18 year old girl was admitted with progressive painful dysphagia and a severe hemorrhagic endoscopically impassable esophagitis. She reported to have consumed an unknown liquid from a small flask on a party three weeks ago. Later on, this liquid was identified as a party- and sex-drug known as "Poppers", designed to be consumed by sniffing. On admission she had difficulties in swallowing liquids and even saliva. She had lost 8 kg of weight during the last 3 weeks. Clinical examination revealed tachycardia, a moderate tenderness in the epigastrium and sparse bowel sounds. Investigation and treatment: On endoscopy, there was a severe corrosion injury of the esophagus with a consecutive stenosis at 40 cm ab ore. The stenosis could not be passed even with a 4.9 mm instrument. After initial placement of a feeding tube the stenosis was dilated with Savary-Bougies. In the following years, the patient suffered from recurrent stenosis due to excessive scar formation. Repeated treatment with longitudinal incisions by needle knife and steroid injections improved symptoms to a tolerable degree. 5 years after ingestion, the patient still carries a long segment esophageal scarring with mild to moderate stenosis. The party drug Poppers is an organic nitrogen compound that has increasingly come into use over the past years. It may cause severe and life threatening esophageal chemical burn injury. Symptoms of painful dysphagia after intake of an "unknown" liquid party drug should raise the suspicion of an accidental oral ingestion of Poppers. © Georg Thieme Verlag KG Stuttgart · New York.

Scientific and Ethical Approaches for Observational Exposure Studies

EPA Science Inventory

Researchers conduct observational human exposure studies to understand how and the extent to which people come into contact with chemicals and environmental stressors in their everyday lives, through the air they breathe, the food and liquids they consume, and the things they tou...

Liquid biopsy: A potential and promising diagnostic tool for advanced stage non-small cell lung cancer patients.

PubMed

Doval, D C; Deshpande, R; Dhabhar, B; Babu, K G; Prabhash, K; Chopra, R; Sripada, P V; Deshmukh, C; Suryavanshi, M

2017-12-01

More than 50% of non-small cell lung cancer (NSCLC) cases harbor an actionable mutation, and molecular testing at different intervals can help in personalized and targeted treatment. Core tissue biopsy and needle biopsy done at the time of diagnosis/disease progression are interventional, time-consuming and can affect the patients adversely. Noninterventional biomarker testing by liquid biopsy promises to revolutionize advanced stage cancer screening. The present report was formulated based on an expert panel meeting of renowned oncologists who gave their opinions for minimally invasive liquid biopsy to detect targetable molecular biomarkers in advanced NSCLC cases. An exhaustive literature search was done to support their recommendations. Clinical utility of minimally invasive liquid biopsy, for detection of molecular biomarkers in advanced stage NSCLC patients, was broadly discussed by the key opinion leaders.

Monitoring emerging contaminants in the drinking water of Milan and assessment of the human risk.

PubMed

Riva, Francesco; Castiglioni, Sara; Fattore, Elena; Manenti, Angela; Davoli, Enrico; Zuccato, Ettore

2018-04-01

Emerging Contaminants (ECs) are ubiquitous in waters, arousing concern because of their potential risks for human health and the environment. This study investigated the presence of multiple classes of ECs in 21 wells over the drinking water network of Milan, in the most inhabited and industrialized area of Italy, and assessed the risks for consumers. Samples were analyzed using liquid chromatography coupled to mass spectrometry. Human risk assessment (HRA) was conducted by comparing the measured concentrations with drinking water thresholds from guidelines or calculated in this study; first considering the exposure to each single EC and then the entire mixture. Thirteen ECs were measured in the low ng/L range, and were generally detected in less than half of the wells. Pharmaceuticals, perfluorinated substances, personal care products, and anthropogenic markers were the most frequently detected. The results of the HRA excluded any risks for consumers in each scenario considered. This is one of the most comprehensive studies assessing the presence of a large number of ECs in the whole drinking water network of a city, and the risks for human health. Results improve the limited information on ECs sources and occurrence in drinking water and help establishing guidelines for regulatory purposes. Copyright © 2018 Elsevier GmbH. All rights reserved.

MONITORING SYNTHETIC MUSK COMPOUNDS IN ...

EPA Pesticide Factsheets

Synthetic musk compounds are manufactured as fragrance materials for consumer products and are consumed in very large quantities worldwide. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: To apply state-of-the-art envir

Collection of liquid from below-ground location

DOEpatents

Phillips, S.J.; Alexander, R.G.

1995-05-30

A method is described for retrieving liquid from a below-ground collection area by permitting gravity flow of the liquid from the collection area to a first closed container; monitoring the level of the liquid in the closed container; and after the liquid reaches a given level in the first closed container, transferring the liquid to a second closed container disposed at a location above the first closed container, via a conduit, by introducing into the first closed container a gas which is substantially chemically inert with respect to the liquid, the gas being at a pressure sufficient to propel the liquid from the first closed container to the second closed container. 3 figs.

Optimization of an accelerated solvent extraction dispersive liquid-liquid microextraction method for the separation and determination of essential oil from Ligusticum chuanxiong Hort by gas chromatography with mass spectrometry.

PubMed

Yang, Guang; Sun, Qiushi; Hu, Zhiyan; Liu, Hua; Zhou, Tingting; Fan, Guorong

2015-10-01

In this study, an accelerated solvent extraction dispersive liquid-liquid microextraction coupled with gas chromatography and mass spectrometry was established and employed for the extraction, concentration and analysis of essential oil constituents from Ligusticum chuanxiong Hort. Response surface methodology was performed to optimize the key parameters in accelerated solvent extraction on the extraction efficiency, and key parameters in dispersive liquid-liquid microextraction were discussed as well. Two representative constituents in Ligusticum chuanxiong Hort, (Z)-ligustilide and n-butylphthalide, were quantitatively analyzed. It was shown that the qualitative result of the accelerated solvent extraction dispersive liquid-liquid microextraction approach was in good agreement with that of hydro-distillation, whereas the proposed approach took far less extraction time (30 min), consumed less plant material (usually <1 g, 0.01 g for this study) and solvent (<20 mL) than the conventional system. To sum up, the proposed method could be recommended as a new approach in the extraction and analysis of essential oil. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Apparent bioavailability of isoflavones after intake of liquid and solid soya foods

PubMed Central

Franke, Adrian A.; Ashburn, Leslie A.; Kakazu, Kerry; Suzuki, Shana; Wilkens, Lynne R.; Halm, Brunhild M.

2015-01-01

Isoflavone (IFL) intake may provide numerous health benefits, but IFL bioavailability differences among soya foods remains uncertain. Urinary IFL excretion (UIE) was shown to provide a reliable surrogate for systemic IFL exposure and therefore can be used as a measure of ‘apparent bioavailability’ (AB). We investigated the AB of IFL in fourteen healthy adults, consuming two liquid and two solid soya foods in a crossover designed study. Volunteers consumed the foods with a self-selected breakfast, which was kept identical for all four soya items (soya nuts, soya milk, soya protein bar and soya protein powder drink in water; average 23·7 mg IFL, 88–96 % glycosides, by HPLC analysis) and collected all urine up to 26 h. Liquid foods showed initially higher UIE values than solid foods, but this difference was considerably reduced or disappeared entirely after 24–26 h. Conclusive AB results were obtained only after 24–26 h; earlier collections were not reliable. At 26 h, adjusted UIE values for daidzein (DE) were 20 μmol in the milk and bar and 17 μmol for the nut and powder; urinary genistein excretion was the highest in the milk group (10 μmol) followed by the nut, bar (both 6 μmol) and powder groups (5 μmol); the UIE for glycitein was the highest for bars (4 μmol), followed by powder and nuts (3 μmol), and milk (2 μmol). DE makes the largest contribution to urinary total IFL. The AB of IFL was found to be variable depending on the analyte and soya food consumed. PMID:19450369

Consumer acceptance of cultured meat: A systematic review.

PubMed

Bryant, Christopher; Barnett, Julie

2018-09-01

Cultured meat grown in-vitro from animal cells is being developed as a way of addressing many of the ethical and environmental concerns associated with conventional meat production. As commercialisation of this technology appears increasingly feasible, there is growing interest in the research on consumer acceptance of cultured meat. We present a systematic review of the peer-reviewed literature, and synthesize and analyse the findings of 14 empirical studies. We highlight demographic variations in consumer acceptance, factors influencing acceptance, common consumer objections, perceived benefits, and areas of uncertainty. We conclude by evaluating the most important objections and benefits to consumers, as well as highlighting areas for future research. Copyright © 2018 Elsevier Ltd. All rights reserved.

Biotechnology and Consumer Decision-Making.

PubMed

Sax, Joanna K

Society is facing major challenges in climate change, health care and overall quality of life. Scientific advances to address these areas continue to grow, with overwhelming evidence that the application of highly tested forms of biotechnology is safe and effective. Despite scientific consensus in these areas, consumers appear reluctant to support their use. Research that helps to understand consumer decision-making and the public’s resistance to biotechnologies such as vaccines, fluoridated water programs and genetically engineered food, will provide great social value. This article is forward-thinking in that it suggests that important research in behavioral decision-making, specifically affect and ambiguity, can be used to help consumers make informed choices about major applications of biotechnology. This article highlights some of the most controversial examples: vaccinations, genetically engineered food, rbST treated dairy cows, fluoridated water, and embryonic stem cell research. In many of these areas, consumers perceive the risks as high, but the experts calculate the risks as low. Four major thematic approaches are proposed to create a roadmap for policymakers to consider for policy design and implementation in controversial areas of biotechnology. This article articulates future directions for studies that implement decision-making research to allow consumers to appropriately assign risk to their options and make informed decisions.

Consumer Competency Means High School Diploma in Omaha School

ERIC Educational Resources Information Center

Carlock, LaNeta L.

1977-01-01

Westside High School in Omaha, Nebraska, developed a series of minimum competencies in seven areas as standards for their graduates. One of the seven areas, consumerism, covers money management, credit, insurance, taxes, buying decisions, and consumer protection. (BM)

First stage of reaction of molten Al with MgO substrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgiel, J., E-mail: j.morgiel@imim.pl; Sobczak, N.; Motor Transport Institute, 80 Jagiellońska St., 03-301 Warsaw

The Al/MgO couple was produced in vacuum (~ 5 × 10{sup −} {sup 4} Pa) by contact heating from RT up to 1000 °C and holding at that temperature for 1 h of a small 4 × 4 × 4 mm aluminium (5 N) sample placed on the [100] MgO single crystal substrate. TEM observations backed with electron diffraction analysis indicated that the interaction between liquid aluminium and MgO starts from a redox reaction producing a continuous layer of MgAl{sub 2}O{sub 4} spinel on the substrate surface. Its growth is controlled by solid state out-diffusion of magnesium and oxygen towardsmore » the surface being in contact with liquid metal. The thickening of spinel layer is accompanied by its cracking and infiltration with aluminium. The above process enables local dissolution of the MgO substrate and formation in it of a thin region of interpenetrating metallic channels walled with spinel. The removal of dissolved magnesium through open aluminium channels towards the drop and to vacuum locally produces areas of aluminium enriched with dissolved oxygen, which results in the nucleation of α-Al{sub 2}O{sub 3} at spinel clad walls. The growth of α-Al{sub 2}O{sub 3} is controlled only by the dissolution rate of MgO by aluminium, liquid state diffusion of Mg to drop/vacuum and oxygen to the front of the of α-Al{sub 2}O{sub 3} crystallites growing into MgO substrate. - Highlights: • New unique evidence of first stages of interaction of liquid Al with MgO substrates • Interaction of liquid Al with MgO starts with the formation of a layer MgAl{sub 2}O{sub 4}. • Growth of MgAl{sub 2}O{sub 4} is slow as controlled by solid state out-diffusion of Mg and O. • MgAl{sub 2}O{sub 4} serves as a nucleation site for Al{sub 2}O{sub 3} and consumed by it soon after. • Growth of Al{sub 2}O{sub 3} is fast as controlled by diffusion in liquid state.« less

The effects of body temperature and mass on the postprandial metabolic responses of the African egg-eating snakes Dasypeltis scabra and Dasypeltis inornata.

PubMed

Greene, Sara; McConnachie, Suzanne; Secor, Stephen; Perrin, Mike

2013-06-01

African egg-eating snakes (Dasypeltis) feed only on freshly laid bird eggs which they perforate within their esophagus before swallowing the liquid contents and regurgitating the empty shell. Compared to a snake's typical intact meal, the liquid diet of Dasypeltis would expectedly generate a more moderate postprandial metabolic response and specific dynamic action (SDA). Free-ranging Dasypeltis feed over a range of ambient temperatures and thereby experience predicted temperature-dependent shifts in the duration and magnitude of their postprandial metabolic response. Such shifts would undoubtedly be shared among different species and age classes of Dasypeltis. To examine these expectations, we measured pre- and postprandial metabolic rates of adult Dasypeltis inornata and adult and neonate Dasypeltis scabra in response to liquid egg meals weighing 20% of snake body mass at 20, 25, 27, 30, and 32 °C. With an increase in body temperature, postprandial metabolic profiles of neonate and adult snakes became narrower and shorter in duration. Specific dynamic action varied among temperature treatments, increasing from 20 to 32 °C. Standard metabolic rate, postprandial peak metabolic rate, and SDA scaled with mass exponents that typically did not differ from 1.0. As expected, Dasypeltis digesting a liquid egg diet experienced a more modest postprandial response and SDA, expending on average only 10.6% of the meal's energy on the breakdown, absorption, and assimilation of the egg meal, whereas other colubrids consuming intact rodent or fish meals expend on average 16.3% of the meal's energy on digestion and assimilation. Actively foraging and feeding throughout the avian egg laying season enable Dasypeltis to survive when eggs are not available. The adaptive suite of traits that enable Dasypeltis to consume eggs of large relative size and ingest only the liquid contents may also be joined by physiological adaptations specific to their liquid diet and extended bouts of fasting. Copyright © 2013 Elsevier Inc. All rights reserved.

Fluid intake patterns: an epidemiological study among children and adolescents in Brazil

PubMed Central

2012-01-01

Background Energy from liquids is one of the most important factors that could impact on the high prevalence of children and adolescents obesity around the world. There are few data on the liquid consumption in Brazil. The aim of this study is to evaluate the volume and quality of liquids consumed by Brazilian children and adolescents and to determine the proportion of their daily energy intake composed of liquids. Methods A multicenter study was conducted in five Brazilian cities; the study included 831 participants between 3 and 17 years of age. A four-day dietary record specific to fluids was completed for each individual, and the volume of and Kcal from liquid intake were evaluated. The average number of Kcal in each beverage was determined based on label information, and the daily energy intake data from liquids were compared with the recommendations of the National Health Surveillance Agency (Agência Nacional de Vigilância Sanitária– ANVISA), the Brazilian food regulation authority, according to each subject’s age. Results As the children aged, the volume of carbonated beverages that they consumed increased significantly, and their milk intake decreased significantly. For children between the ages of 3 and 10, milk and dairy products contributed the greatest daily number of Kcal from liquids. Sugar sweetened beverages which included carbonated beverages, nectars and artificial beverages, accounted for 37% and 45% of the total Kcal from liquid intake in the 3- to 6-year-old and 7- to 10- year-old groups, respectively. Among adolescents (participants 11- to 17- years old), most of the energy intake from liquids came from carbonated beverages, which accounted for an average of 207 kcal/day in this group (42% of their total energy intake from liquids). Health professionals should be attentive to the excessive consumption of sugar sweetened beverages in children and adolescents. The movement toward healthier dietary patterns at the individual and population levels may help to improve programs for preventing overweight and obesity in children and adolescents. Conclusion From childhood to adolescence the daily volume of liquid ingested increased reaching a total of 2.0 liters on average. Of this volume, the daily volume of milk ingested decreased while the carbonated drinks, sweetened, nectars and artificial beverages increased significantly. The proportion of water remained constant in about 1/3 of the total volume. From 3 to 17 years of age the energy intake from carbonated beverages increased by about 20%. The carbonated drinks on average corresponded to a tenth of the daily requirements of energy of adolescents. PMID:23167254

What are the cultural effects on consumers' perceptions? A case study covering coalho cheese in the Brazilian northeast and southeast area using word association.

PubMed

Soares, Eveline K B; Esmerino, Erick A; Ferreira, Marcus Vinícius S; da Silva, Maria Aparecida A P; Freitas, Mônica Q; Cruz, Adriano G

2017-12-01

The aim of this study was to investigate the effects of regional diversity aspects related to consumers' perceptions of coalho cheese, with Brazilian Northeast and Southeast consumers (n=400, divided equally in each area) using Word Association (WA) task. Different perceptions were detected for both Northeast and Southeast consumers, and among 17 categories elicited for describing coalho cheese, only 7 categories (positive feeling, social aspects, sensory characteristic, dairy product technology, negative feeling, and lack of quality standard) presented significant differences in the frequency of mention according to chi-square per cell approach. The application of the discriminant technique Partial Least Square Discriminant Analysis (PLS-DA) indicated that the categories "Social", "Accompaniment", "Manufacturing method" were the main responsible for differentiating consumers' perceptions of both areas. Overall, the main dimensions involved in the consumers' perceptions of coalho cheese from different Brazilian regions were identified, thus obtaining comprehensive insights that can be used as a guideline for coalho cheese producers to develop marketing strategies considering the intra-cultural differences. Copyright © 2017. Published by Elsevier Ltd.

Domain independence and stability in young and older adults' discounting of delayed rewards.

PubMed

Jimura, Koji; Myerson, Joel; Hilgard, Joseph; Keighley, Julia; Braver, Todd S; Green, Leonard

2011-07-01

Individual discounting rates for different types of delayed reward are typically assumed to reflect a single, underlying trait of impulsivity. Recently, we showed that discounting rates are orders of magnitude steeper for directly consumable liquid rewards than for monetary rewards (Jimura et al., 2009), raising the question of whether discounting rates for different types of reward covary at the individual level. Accordingly, the present study examined the relation between discounting of hypothetical money and real liquid rewards in young adults (Experiment 1) and older adults (Experiment 2). At the group level, young adults discounted monetary rewards more steeply than the older adults, but there was no significant age difference with respect to liquid rewards. At the individual level, the rates at which young and older participants discounted each reward type were stable over a two- to fifteen-week interval (rs>70), but there was no significant correlation between the rates at which they discounted the two reward types. These results suggest that although similar decision-making processes may underlie the discounting of different types of rewards, the rates at which individuals discount money and directly consumable rewards may reflect separate, stable traits, rather than a single trait of impulsivity. Copyright © 2011 Elsevier B.V. All rights reserved.

Trends in salmonella food poisoning in England and Wales 1941-72.

PubMed Central

McCoy, J. H.

1975-01-01

Cattle and pig herds and flocks of domestic fowl have formed the main reservoir of human salmonella food poisoning in England and Wales from 1941 to 1972. Changes in the incidence of human salmonella food poisoning and in the serotypes of salmonellas isolated from human infections are shown to have been associated with the introduction of new foods, with changes in animal husbandry, and with changes in the relative proportions of flesh food from different species consumed. New foods, dried powdered egg, liquid egg and frozen liquid egg were introduced during the period of food rationing which extended from 1940 to 1953. Changes in animal husbandry, in particular the intensive production of pigs, poultry and eggs, followed the re-establishment of pig herds and fowl flocks after the derationing of animal feed in 1953. The changes in the proportions of flesh foods consumed followed the introduction of frozen oven-ready fowl in the late 1950s and early 1960s which by 1964 became cheaper than traditional flesh foods. PMID:1054731

New insights into liquid chromatography for more eco-friendly analysis of pharmaceuticals.

PubMed

Shaaban, Heba

2016-10-01

Greening the analytical methods used for analysis of pharmaceuticals has been receiving great interest aimed at eliminating or minimizing the amount of organic solvents consumed daily worldwide without loss in chromatographic performance. Traditional analytical LC techniques employed in pharmaceutical analysis consume tremendous amounts of hazardous solvents and consequently generate large amounts of waste. The monetary and ecological impact of using large amounts of solvents and waste disposal motivated the analytical community to search for alternatives to replace polluting analytical methodologies with clean ones. In this context, implementing the principles of green analytical chemistry (GAC) in analytical laboratories is highly desired. This review gives a comprehensive overview on different green LC pathways for implementing GAC principles in analytical laboratories and focuses on evaluating the greenness of LC analytical procedures. This review presents green LC approaches for eco-friendly analysis of pharmaceuticals in industrial, biological, and environmental matrices. Graphical Abstract Green pathways of liquid chromatography for more eco-friendly analysis of pharmaceuticals.

Evaluation of electronic cigarette use (vaping) topography and estimation of liquid consumption: implications for research protocol standards definition and for public health authorities' regulation.

PubMed

Farsalinos, Konstantinos E; Romagna, Giorgio; Tsiapras, Dimitris; Kyrzopoulos, Stamatis; Voudris, Vassilis

2013-06-18

Although millions of people are using electronic cigarettes (ECs) and research on this topic has intensified in recent years, the pattern of EC use has not been systematically studied. Additionally, no comparative measure of exposure and nicotine delivery between EC and tobacco cigarette or nicotine replacement therapy (NRTs) has been established. This is important, especially in the context of the proposal for a new Tobacco Product Directive issued by the European Commission. A second generation EC device, consisting of a higher capacity battery and tank atomiser design compared to smaller cigarette-like batteries and cartomizers, and a 9 mg/mL nicotine-concentration liquid were used in this study. Eighty subjects were recruited; 45 experienced EC users and 35 smokers. EC users were video-recorded when using the device (ECIG group), while smokers were recorded when smoking (SM-S group) and when using the EC (SM-E group) in a randomized cross-over design. Puff, inhalation and exhalation duration were measured. Additionally, the amount of EC liquid consumed by experienced EC users was measured at 5 min (similar to the time needed to smoke one tobacco cigarette) and at 20 min (similar to the time needed for a nicotine inhaler to deliver 4 mg nicotine). Puff duration was significantly higher in ECIG (4.2 ± 0.7 s) compared to SM-S (2.1 ± 0.4 s) and SM-E (2.3 ± 0.5 s), while inhalation time was lower (1.3 ± 0.4, 2.1 ± 0.4 and 2.1 ± 0.4 respectively). No difference was observed in exhalation duration. EC users took 13 puffs and consumed 62 ± 16 mg liquid in 5 min; they took 43 puffs and consumed 219 ± 56 mg liquid in 20 min. Nicotine delivery was estimated at 0.46 ± 0.12 mg after 5 min and 1.63 ± 0.41 mg after 20 min of use. Therefore, 20.8 mg/mL and 23.8 mg/mL nicotine-containing liquids would deliver 1 mg of nicotine in 5 min and 4 mg nicotine in 20 min, respectively. Since the ISO method significantly underestimates nicotine delivery by tobacco cigarettes, it seems that liquids with even higher than 24 mg/mL nicotine concentration would be comparable to one tobacco cigarette. EC use topography is significantly different compared to smoking. Four-second puffs with 20-30 s interpuff interval should be used when assessing EC effects in laboratory experiments, provided that the equipment used does not get overheated. Based on the characteristics of the device used in this study, a 20 mg/mL nicotine concentration liquid would be needed in order to deliver nicotine at amounts similar to the maximum allowable content of one tobacco cigarette (as measured by the ISO 3308 method). The results of this study do not support the statement of the European Commission Tobacco Product Directive that liquids with nicotine concentration of 4 mg/mL are comparable to NRTs in the amount of nicotine delivered to the user.

Advanced Booster Liquid Engine Combustion Stability

NASA Technical Reports Server (NTRS)

Tucker, Kevin; Gentz, Steve; Nettles, Mindy

2015-01-01

Combustion instability is a phenomenon in liquid rocket engines caused by complex coupling between the time-varying combustion processes and the fluid dynamics in the combustor. Consequences of the large pressure oscillations associated with combustion instability often cause significant hardware damage and can be catastrophic. The current combustion stability assessment tools are limited by the level of empiricism in many inputs and embedded models. This limited predictive capability creates significant uncertainty in stability assessments. This large uncertainty then increases hardware development costs due to heavy reliance on expensive and time-consuming testing.

Determination of uranium in clinical and environmental samples by FIAS-ICPMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karpas, Z.; Lorber, A.; Halicz, L.

Uranium may enter the human body through ingestion or inhalation. Ingestion of uranium compounds through the diet, mainly drinking water, is a common occurrence, as these compounds are present in the biosphere. Inhalation of uranium-containing particles is mainly an occupational safety problem, but may also take place in areas where uranium compounds are abundant. The uranium concentration in urine samples may serve as an indication of the total uranium body content. A method based on flow injection and inductively coupled plasma mass spectrometry (FIAS-ICPMS) was found to be most suitable for determination of uranium in clinical samples (urine and serum),more » environmental samples (seawater, wells and carbonate rocks) and in liquids consumed by humans (drinking water and commercial beverages). Some examples of the application of the FIAS-ICPMS method are reviewed and presented here.« less

[Catastrophe hygiene, its contents and place in the federal surveillance service system in the protection of consumers' rights and human well-being].

PubMed

Shaposhnikov, A A; Lukicheva, T A

2005-01-01

In the past two decades, there has been an increase in the number of earthquakes, tidal waves, accidents at chemically dangerous enterprises, and other types of catastrophes, which have posed an emergency survival problem for society. The scientific development of this problem has given rise to a new area of preventive medicine--catastrophe hygiene that is designed to eliminate (reduce) the poor influence of emergency factors and to offer the suffered population safe conditions of accommodation and/or life, water supply, nutrition, and other elements of survival under these conditions. The paper defines the subject and objects of studies in catastrophe hygiene. It characterizes the value and role of this science in the organization and implementation of preventive measures to liquidate the medicosanitary consequences of emergencies, as well as the place of hygienic facilities and research institutes within the framework of the Russian emergency service.

Pharmacokinetic Characterization and Bioavailability of Strawberry Anthocyanins Relative to Meal Intake.

PubMed

Sandhu, Amandeep K; Huang, Yancui; Xiao, Di; Park, Eunyoung; Edirisinghe, Indika; Burton-Freeman, Britt

2016-06-22

Plasma strawberry anthocyanins were characterized in overweight (BMI: 26 ± 2 kg/m(2)) adults (n = 14) on the basis of meal timing. At each visit, subjects ingested three study drinks: two control and one strawberry drink. A strawberry drink was given at either 2 h before the breakfast meal (BM), with the meal (WM), or 2 h after the meal (AM), and control drinks were given at the alternative time points. Plasma anthocyanins and their metabolic conjugates were assessed hourly for 10 h using a triple-quadrupole liquid chromatography mass spectrometer. Maximum concentrations (Cmax), area under the curve (AUC), and bioavailability of pelargonidin-based anthocyanins determined from the main conjugated metabolite (pelargonidin glucuronide) were greater when a strawberry drink was consumed 2 h before the meal (BM) compared to consumption WM or AM (p < 0.05). Our results indicate that the timing of strawberry consumption relative to a meal impacts anthocyanin pharmacokinetic variables.

Simulation of an electrowetting solar concentration cell

NASA Astrophysics Data System (ADS)

Khan, Iftekhar; Rosengarten, Gary

2015-09-01

Electrowetting control of liquid lenses has emerged as a novel approach for solar tracking and concentration. Recent studies have demonstrated the concept of steering sunlight using thin electrowetting cells without the use of any bulky mechanical equipment. Effective application of this technique may facilitate designing thin and flat solar concentrators. Understanding the behavior of liquid-liquid and liquid-solid interface of the electrowetting cell through trial and error experimental processes is not efficient and is time consuming. In this paper, we present a simulation model to predict the liquid-liquid and liquid-solid interface behavior of electrowetting cell as a function of various parameters such as applied voltage, dielectric constant, cell size etc. We used Comsol Multiphysics simulations incorporating experimental data of different liquids. We have designed both two dimensional and three dimensional simulation models, which predict the shape of the liquid lenses. The model calculates the contact angle using the Young-Lippman equation and uses a moving mesh interface to solve the Navier-stokes equation with Navier slip wall boundary condition. Simulation of the electric field from the electrodes is coupled to the Young-Lippman equation. The model can also be used to determine operational characteristics of other MEMS electrowetting devices such as electrowetting display, optical switches, electronic paper, electrowetting Fresnel lens etc.

The Consumer Juggernaut: Web-Based and Mobile Applications as Innovation Pioneer

NASA Astrophysics Data System (ADS)

Messerschmitt, David G.

As happened previously in electronics, software targeted at consumers is increasingly the focus of investment and innovation. Some of the areas where it is leading is animated interfaces, treating users as a community, audio and video information, software as a service, agile software development, and the integration of business models with software design. As a risk-taking and experimental market, and as a source of ideas, consumer software can benefit other areas of applications software. The influence of consumer software can be magnified by research into the internal organizations and processes of the innovative firms at its foundation.

Correction of a liquid lens for 3D imaging systems

NASA Astrophysics Data System (ADS)

Bower, Andrew J.; Bunch, Robert M.; Leisher, Paul O.; Li, Weixu; Christopher, Lauren A.

2012-06-01

3D imaging systems are currently being developed using liquid lens technology for use in medical devices as well as in consumer electronics. Liquid lenses operate on the principle of electrowetting to control the curvature of a buried surface, allowing for a voltage-controlled change in focal length. Imaging systems which utilize a liquid lens allow extraction of depth information from the object field through a controlled introduction of defocus into the system. The design of such a system must be carefully considered in order to simultaneously deliver good image quality and meet the depth of field requirements for image processing. In this work a corrective model has been designed for use with the Varioptic Arctic 316 liquid lens. The design is able to be optimized for depth of field while minimizing aberrations for a 3D imaging application. The modeled performance is compared to the measured performance of the corrected system over a large range of focal lengths.

Liquid Photonic Crystals for Mesopore Detection.

PubMed

Zhu, Biting; Fu, Qianqian; Chen, Ke; Ge, Jianping

2018-01-02

Nitrogen adsorption-desorption for mesopore characterization requires the using of expensive instrumentation, time-consuming processes, and the consumption of liquid nitrogen. Herein, a new method is developed to measure the pore parameters through mixing a mesoporous substance with a supersaturated SiO 2 colloidal solution at different temperatures, and subsequent rapid measurement of reflection changes of the precipitated liquid photonic crystals. The pore volumes and diameters of mesoporous silica were measured according to the positive correlation between unit mass reflection change (Δλ/m) and pore volume (V), and the negative correlation between average absorption temperature (T) and pore diameter (D). This new approach may provide an alternative method for fast, convenient and economical characterization of mesoporous materials. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

5 CFR 591.225 - Which CPIs does OPM use?

Code of Federal Regulations, 2014 CFR

2014-01-01

...—the BLS Consumer Price Index, All Urban Consumers (CPI-U); (b) For all COLA areas in the State of Alaska—the BLS CPI-U for Anchorage, AK; (c) For all COLA areas in the State of Hawaii and for Guam and...

5 CFR 591.225 - Which CPIs does OPM use?

Code of Federal Regulations, 2011 CFR

2011-01-01

...—the BLS Consumer Price Index, All Urban Consumers (CPI-U); (b) For all COLA areas in the State of Alaska—the BLS CPI-U for Anchorage, AK; (c) For all COLA areas in the State of Hawaii and for Guam and...

5 CFR 591.225 - Which CPIs does OPM use?

Code of Federal Regulations, 2010 CFR

2010-01-01

...—the BLS Consumer Price Index, All Urban Consumers (CPI-U); (b) For all COLA areas in the State of Alaska—the BLS CPI-U for Anchorage, AK; (c) For all COLA areas in the State of Hawaii and for Guam and...

5 CFR 591.225 - Which CPIs does OPM use?

Code of Federal Regulations, 2013 CFR

2013-01-01

...—the BLS Consumer Price Index, All Urban Consumers (CPI-U); (b) For all COLA areas in the State of Alaska—the BLS CPI-U for Anchorage, AK; (c) For all COLA areas in the State of Hawaii and for Guam and...

5 CFR 591.225 - Which CPIs does OPM use?

Code of Federal Regulations, 2012 CFR

2012-01-01

...—the BLS Consumer Price Index, All Urban Consumers (CPI-U); (b) For all COLA areas in the State of Alaska—the BLS CPI-U for Anchorage, AK; (c) For all COLA areas in the State of Hawaii and for Guam and...

12 CFR 195.22 - Lending test.

Code of Federal Regulations, 2014 CFR

2014-01-01

... activities by considering a savings association's home mortgage, small business, small farm, and community... business, small farm, and consumer loans, if applicable, in the savings association's assessment area(s..., small business, small farm, and consumer loans, if applicable, based on the loan location, including: (i...

12 CFR 195.22 - Lending test.

Code of Federal Regulations, 2013 CFR

2013-01-01

... activities by considering a savings association's home mortgage, small business, small farm, and community... business, small farm, and consumer loans, if applicable, in the savings association's assessment area(s..., small business, small farm, and consumer loans, if applicable, based on the loan location, including: (i...

Consumer Citizenship Curriculum Guides for Social Studies, English, Science, Mathematics.

ERIC Educational Resources Information Center

MacKenzie, Louise; Smith, Alice

These four consumer citizenship curriculum guides for social studies, English, science, and mathematics incorporate consumer education into these subject matter areas in grades 8-12. Each guide is organized around 10 main component/goals. They are basic economics in the marketplace, credit, consumer law/protection, banking skills, comparison…

Consumer Decisions. Student Manual.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

This student manual covers five areas relating to consumer decisions. Titles of the five sections are Consumer Law, Consumer Decision Making, Buying a Car, Convenience Foods, and Books for Preschool Children. Each section may contain some or all of these materials: list of objectives, informative sections, questions on the information and answers,…

16 CFR 309.11 - Certification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Manufacturers of Electric Vehicle Fuel Dispensing Systems § 309.11 Certification. (a) For non-liquid alternative... certification. (b) For electric vehicle fuel dispensing systems, in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the electric vehicle fuel dispensing system...

16 CFR 309.11 - Certification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Manufacturers of Electric Vehicle Fuel Dispensing Systems § 309.11 Certification. (a) For non-liquid alternative... certification. (b) For electric vehicle fuel dispensing systems, in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the electric vehicle fuel dispensing system...

16 CFR 309.11 - Certification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Manufacturers of Electric Vehicle Fuel Dispensing Systems § 309.11 Certification. (a) For non-liquid alternative... certification. (b) For electric vehicle fuel dispensing systems, in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the electric vehicle fuel dispensing system...

40 CFR 72.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... any form of solid, liquid, or gaseous fuel derived from such material. Fossil fuel-fired means the... average quantity of fossil fuel consumed by a unit, measured in millions of British Thermal Units... high relative to the reference value. Boiler means an enclosed fossil or other fuel-fired combustion...

40 CFR 72.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... any form of solid, liquid, or gaseous fuel derived from such material. Fossil fuel-fired means the... average quantity of fossil fuel consumed by a unit, measured in millions of British Thermal Units... high relative to the reference value. Boiler means an enclosed fossil or other fuel-fired combustion...

40 CFR 72.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... any form of solid, liquid, or gaseous fuel derived from such material. Fossil fuel-fired means the... average quantity of fossil fuel consumed by a unit, measured in millions of British Thermal Units... high relative to the reference value. Boiler means an enclosed fossil or other fuel-fired combustion...

40 CFR 72.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... component failure or condition. Fossil fuel means natural gas, petroleum, coal, or any form of solid, liquid... average quantity of fossil fuel consumed by a unit, measured in millions of British Thermal Units... high relative to the reference value. Boiler means an enclosed fossil or other fuel-fired combustion...

40 CFR 72.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... any form of solid, liquid, or gaseous fuel derived from such material. Fossil fuel-fired means the... average quantity of fossil fuel consumed by a unit, measured in millions of British Thermal Units... high relative to the reference value. Boiler means an enclosed fossil or other fuel-fired combustion...

16 CFR 309.11 - Certification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Manufacturers of Electric Vehicle Fuel Dispensing Systems § 309.11 Certification. (a) For non-liquid alternative... certification. (b) For electric vehicle fuel dispensing systems, in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the electric vehicle fuel dispensing system...

Shortwave infrared hyperspectral Imaging for cotton foreign matter classification

USDA-ARS?s Scientific Manuscript database

Various types of cotton foreign matter seriously reduce the commercial value of cotton lint and further degrade the quality of textile products for consumers. This research was aimed to investigate the potential of a non-contact technique, i.e., liquid crystal tunable filter (LCTF) hyperspectral ima...

Spain Country Analysis Brief

EIA Publications

2016-01-01

Spain is the fifth largest energy consumer in Europe, after Germany, France, United Kingdom, and Italy, and has virtually no domestic production of liquid fuels or natural gas. Government regulation limits the percent of total oil and gas that can be imported from any single country to ensure diversity of supply.

The impact analysis of the connecting pipe length and diameter on the operation of a piston hybrid power machine of positive displacement with gas suction capacity

NASA Astrophysics Data System (ADS)

Shcherba, V. E.; Grigoriev, A. V.; Averyanov, G. S.; Surikov, V. I.; Vedruchenko, V. P.; Galdin, N. S.; Trukhanova, D. A.

2017-08-01

The article analyzes the impact of the connecting liquid pipe length and diameter on consumables and power characteristics of the piston hybrid power machine with gas suction capacity. The following operating characteristics of the machine were constructed and analyzed: the average height of the liquid column in the jacket space; instantaneous velocity and height of the liquid column in the jacket space; the relative height of the liquid column in the jacket space; volumetric efficiency; indicator isothermal efficiency; flowrate in the pump section; relative pressure losses during suction; relative flowrate. The dependence of the instantaneous pressure in the work space and the suction space of the compressor section on the rotation angle of the crankshaft is determined for different values of the length and diameter of the connecting pipeline.

Review and test of chilldown methods for space-based cryogenic tanks

NASA Astrophysics Data System (ADS)

Chato, David J.; Sanabria, Rafael

The literature for tank chilldown methods applicable to cryogenic tankage in the zero gravity environment of earth orbit is reviewed. One method is selected for demonstration in a ground based test. The method selected for investigation was the charge-hold-vent method which uses repeated injection of liquid slugs, followed by a hold to allow complete vaporization of the liquid and a vent of the tank to space vacuum to cool tankage to the desired temperature. The test was conducted on a 175 cubic foot, 2219 aluminum walled tank weighing 329 pounds, which was previously outfitted with spray systems to test nonvented fill technologies. To minimize hardware changes, a simple control-by-pressure scheme was implemented to control injected liquid quantities. The tank cooled from 440 R sufficiently in six charge-hold-vent cycles to allow a complete nonvented fill of the test tank. Liquid hydrogen consumed in the process is estimated at 32 pounds.

Review and test of chilldown methods for space-based cryogenic tanks

NASA Technical Reports Server (NTRS)

Chato, David J.; Sanabria, Rafael

1991-01-01

The literature for tank chilldown methods applicable to cryogenic tankage in the zero gravity environment of earth orbit is reviewed. One method is selected for demonstration in a ground based test. The method selected for investigation was the charge-hold-vent method which uses repeated injection of liquid slugs, followed by a hold to allow complete vaporization of the liquid and a vent of the tank to space vacuum to cool tankage to the desired temperature. The test was conducted on a 175 cubic foot, 2219 aluminum walled tank weighing 329 pounds, which was previously outfitted with spray systems to test nonvented fill technologies. To minimize hardware changes, a simple control-by-pressure scheme was implemented to control injected liquid quantities. The tank cooled from 440 R sufficiently in six charge-hold-vent cycles to allow a complete nonvented fill of the test tank. Liquid hydrogen consumed in the process is estimated at 32 pounds.

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Economically Depressed Areas Strand: Foods and Nutrition. Module III-C-1: Food Availability in Economically Depressed Areas.

ERIC Educational Resources Information Center

California State Univ., Fresno. Dept. of Home Economics.

This competency-based preservice home economics teacher education module on food availability in economically depressed areas (EDA) is the first in a set of three modules on foods and nutrition in economically depressed areas. (This set is part of a larger set of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking…

Simultaneous viscosity and density measurement of small volumes of liquids using a vibrating microcantilever† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6an02674e Click here for additional data file.

PubMed Central

Payam, A. F.; Trewby, W.

2017-01-01

Many industrial and technological applications require precise determination of the viscosity and density of liquids. Such measurements can be time consuming and often require sampling substantial amounts of the liquid. These problems can partly be overcome with the use of microcantilevers but most existing methods depend on the specific geometry and properties of the cantilever, which renders simple, accurate measurement difficult. Here we present a new approach able to simultaneously quantify both the density and the viscosity of microliters of liquids. The method, based solely on the measurement of two characteristic frequencies of an immersed microcantilever, is completely independent of the choice of a cantilever. We derive analytical expressions for the liquid's density and viscosity and validate our approach with several simple liquids and different cantilevers. Application of our model to non-Newtonian fluids shows that the calculated viscosities are remarkably robust when compared to measurements obtained from a standard rheometer. However, the results become increasingly dependent on the cantilever geometry as the frequency-dependent nature of the liquid's viscosity becomes more significant. PMID:28352874

A Zero-Gravity Cup for Drinking Beverages in Microgravity

NASA Technical Reports Server (NTRS)

Pettit, Donald R.; Weislogel, Mark; Concus, Paul; Finn, Robert

2011-01-01

To date, the method for astronauts to drink liquids in microgravity or weightless environments is to suck the liquid from a bag or pouch through a straw. A new beverage cup works in microgravity and allows astronauts to drink liquids from a cup in a manner consistent with that on Earth. The cup is capable of holding beverages with an angled channel running along the wall from the bottom to the lip. In microgravity, a beverage is placed into the cup using the galley dispenser. The angled channel acts as an open passage that contains only two sides where capillary forces move the liquid along the channel until it reaches the top lip where the forces reach an equilibrium and the flow stops. When one sips the liquid at the lip of the channel, the capillary force equilibrium is upset and more liquid flows to the lip from the reservoir at the bottom to re-establish the equilibrium. This sipping process can continue until the total liquid contents of the cup is consumed, leaving only a few residual drops about the same quantity as in a ceramic cup when it is drunk dry on Earth.

Nucleolar Organizer Regions of Oral Epithelial Cells in Crack Cocaine Users

PubMed Central

Carvalho de M. Thiele, Magna; Carlos Bohn, Joslei; Lima Chaiben, Cassiano; Trindade Grégio, Ana Maria; Ângela Naval Machado, Maria; Adilson Soares de Lima, Antonio

2013-01-01

Background: The health risks of crack cocaine smoking on the oral mucosa has not been widely researched and documented. Objective: The purpose of this study was to analyze the proliferative activity of oral epithelial cells exposed to crack cocaine smoke using silver nucleolar organizer region (AgNOR) staining. Methods: Oral smears were collected from clinically normal-appearing buccal mucosa by liquid-based exfoliative cytology of 60 individuals (30 crack cocaine users and 30 healthy controls matched for age and gender) and analyzed for cytomorphologic and cytomorphometric techniques. Results: Crack cocaine users consumed about 13.3 heat-stable rocks per day and the time consumption of the drug was of 5.2 (± 3.3) years. Mean values of AgNOR counting for case and control groups were 5.18 ± 1.83 and 3.38 ± 1.02 (P<0.05), respectively. AgNOR area and percentage of AgNOR-occupied nuclear area were increased in comparison with the control (P<0.05). There was no statistically significant difference in the mean values of the nuclear area between the groups (P>0.05). Conclusion: This study revealed that crack cocaine smoke increases the rate of cellular proliferation in cells of normal buccal mucosa. PMID:23567853

Engaging consumers living in remote areas of Western Australia in the self-management of back pain: a prospective cohort study

PubMed Central

2012-01-01

Background In Western Australia (WA), health policy recommends encouraging the use of active self-management strategies as part of the co-care of consumers with persistent low back pain (LBP). As many areas in WA are geographically isolated and health services are limited, implementing this policy into practice is critical if health outcomes for consumers living in geographically-isolated areas are to be improved. Methods In this prospective cohort study, 51 consumers (mean (SD) age 62.3 (±15.1) years) participated in an evidence-based interdisciplinary pain education program (modified Self Training Educative Pain Sessions: mSTEPS) delivered at three geographically isolated WA sites. Self report measures included LBP beliefs and attitudes (Back Pain Beliefs Questionnaire (BBQ); Fear Avoidance Beliefs Questionnaire (FABQ)), use of active and passive self-management strategies, and health literacy, and global perceived impression of usefulness (GPIU) recorded immediately pre-intervention (n = 51), same day post-intervention (BBQ; GPIU, n = 49) and 3 months post-intervention (n = 25). Results At baseline, consumers demonstrated adequate health literacy and elements of positive health behaviours, reflected by the use of more active than passive strategies in self-managing their persistent LBP. Immediately post-intervention, there was strong evidence for improvement in consumers’ general beliefs about LBP as demonstrated by an increase in BBQ scores (baseline [mean (SD): 25.8 (7.6)] to same day post-intervention [28.8 (7.2); P < 0.005], however this improvement was not sustained at 3 months post-intervention. The majority of consumers (86.4%) reported the intervention as very useful [rated on NRS as 7–10]. Conclusions To sustain improved consumer beliefs regarding LBP and encourage the adoption of more positive health behaviours, additional reinforcement strategies for consumers living in remote areas where service access and skilled workforce are limited are recommended. This study highlights the need for aligning health services and skilled workforce to improve the delivery of co-care for consumers living in geographically isolated areas. PMID:22578207

Research on Liquid Lubricants for Space Mechanisms

NASA Technical Reports Server (NTRS)

Jones, William R., Jr.; Shogrin, Bradley A.; Jansen, Mark J.

1999-01-01

Four research areas at the NASA Glenn Research Center involving the tribology of space mechanisms are highlighted. These areas include: soluble boundary lubrication additives for perfluoropolyether liquid lubricants, a Pennzane dewetting phenomenon, the effect of ODC-free bearing cleaning processes on bearing lifetimes and the development of a new class of liquid lubricants based on silahydrocarbons.

Research on liquid lubricants for space mechanisms

NASA Technical Reports Server (NTRS)

Jones, William R., Jr.; Shogrin, Bradley A.; Jansen, Mark J.

1998-01-01

Four research areas at the NASA Lewis Research Center involving the tribology of space mechanisms are highlighted. These areas include: soluble boundary lubrication additives for perfluoropolyether liquid lubricants, a Pennzane dewetting phenomenon, the effect of ODC-free bearing cleaning processes on bearing lifetimes, and the development of a new class of liquid lubricants based on silahydrocarbons.

12 CFR 228.22 - Lending test.

Code of Federal Regulations, 2013 CFR

2013-01-01

... assessment area(s) through its lending activities by considering a bank's home mortgage, small business... and amount of the bank's home mortgage, small business, small farm, and consumer loans, if applicable... bank's home mortgage, small business, small farm, and consumer loans, if applicable, based on the loan...

Modeling interfacial area transport in multi-fluid systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarbro, Stephen Lee

1996-11-01

Many typical chemical engineering operations are multi-fluid systems. They are carried out in distillation columns (vapor/liquid), liquid-liquid contactors (liquid/liquid) and other similar devices. An important parameter is interfacial area concentration, which determines the rate of interfluid heat, mass and momentum transfer and ultimately, the overall performance of the equipment. In many cases, the models for determining interfacial area concentration are empirical and can only describe the cases for which there is experimental data. In an effort to understand multiphase reactors and the mixing process better, a multi-fluid model has been developed as part of a research effort to calculate interfacialmore » area transport in several different types of in-line static mixers. For this work, the ensemble-averaged property conservation equations have been derived for each fluid and for the mixture. These equations were then combined to derive a transport equation for the interfacial area concentration. The final, one-dimensional model was compared to interfacial area concentration data from two sizes of Kenics in-line mixer, two sizes of concurrent jet and a Tee mixer. In all cases, the calculated and experimental data compared well with the highest scatter being with the Tee mixer comparison.« less

Frequency of consumption of cariogenic food items by 4-month-old to 24-month-old children: comparison between two rural communities in KwaZulu-Natal, South Africa.

PubMed

MacKeown, Jennifer M; Faber, Mieke

2005-03-01

The objective of the study was to compare the frequency of consumption of cariogenic food items among 4-month-old to 24-month-old children in two neighbouring rural areas in KwaZulu-Natal Province, South Africa: Nyuswa/Embo (Area A) (n = 127) and Ndunakazi (Area B) (n = 105). Dietary intake was assessed using a food frequency questionnaire. Mothers or caregivers were interviewed by a team of Zulu-speaking fieldworkers. The percentage of children consuming the individual food items (consumers) and the weekly consumption for consumers were calculated for the two areas separately. The food items were ranked in descending order according to the combined group of children and reported for each area within five selected food groups (carbohydrates, sugars, fruit and vegetables, milk and milk products, and other foods and snacks). Food items were 'flagged' according to their cariogenic potential. Fisher's exact test on absolute numbers tested for significant differences in the frequency of intake between individual food items between the two groups. Significance was set at P < 0.05. The frequency of consumption of certain listed cariogenic food items showed significant differences between the two areas. A higher percentage of children in Area A than in Area B consumed most of the food items and also more frequently. Children mainly consumed foods with a cariogenic score of 2, solid foods with 8-20% sugars as well as foods high in starch with less than 10% sugars. This knowledge is essential to gain insight into the eating pattern among rural communities and will provide a baseline for developing and adapting dietary advice specifically for young rural South African children with particular emphasis on the prevention of dental caries.

Concentration and form of copper released into aquatic systems from commercial liquid and micronized pressure treated lumber.

EPA Science Inventory

The fate and effects of pristine engineered metal nanomaterials (ENMs) in simplified systems have been widely studied; however, little is known about the potential release and impact of metal ENMs from consumer goods, especially lumber that has been treated with micronized copper...

47 CFR 1.1914 - Collection in installments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Claims Owed the United States Administrative Offset-Consumer Reporting Agencies-Contracting for... will be sufficient in size and frequency to liquidate the debt in three years or less. (c) Security for... notwithstanding the refusal of the debtor to execute a written agreement or to give security, at the Commission's...

Liquid Subjects: News Media and Public Political Pedagogy

ERIC Educational Resources Information Center

Piotrowski, Marcelina; Ruitenberg, Claudia

2016-01-01

The purpose of this paper is to examine the relationship between news media and political education within consumer society. We argue that political education today needs to be understood as part of consumerism and media culture, in which individuals selectively expose themselves to and scrutinize various media representations not only of…

Concentration and form of copper released into aquatic systems from commercial liquid and micronized pressure treated lumber

EPA Science Inventory

The fate and effects of pristine engineered metal nanomaterials (ENMs) in simplified systems have been widely studied; however, little is known about the potential release and impact of metal ENMs from consumer goods, especially lumber which has been treated with micronized coppe...

16 CFR 1027.8 - Procedures for salary offset.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedures for salary offset. 1027.8 Section 1027.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SALARY OFFSET § 1027.8 Procedures for salary offset. (a) Deductions to liquidate an employee's debt will be by the method and in the...

Fiber Optic Coupled Raman Based Detection of Hazardous Liquids Concealed in Commercial Products

DTIC Science & Technology

2012-01-01

Industrial Compounds in Personal Care Products . Consumer products such as personal care and cosmetics present a challenge. Commonly these products... personal care products are also colored and present fluorescence, obscuring the persistent Raman signatures. The spectra of a perfume is shown in Figure

Identification of molecular species of acylglycerols of Philippine wild edible mushroom, Ganoderma lucidum

USDA-ARS?s Scientific Manuscript database

Wild edible mushrooms are widely consumed in many countries. Recently, we successfully cultivated four edible medicinal Philippine mushrooms in liquid cultures. One of these is Ganoderma lucidum. With the aim to elucidate the functional bioactive lipids, we identified the lipid species of the solven...

Identification of molecular species of acylglycerols of Philippine wild edible mushroom, Ganoderma lucidum

USDA-ARS?s Scientific Manuscript database

Wild edible mushrooms are widely consumed in many countries. We successfully cultivated four edible, medicinal Philippine mushrooms in liquid culture. Recently, we identified the molecular species of acylglycerols in the lipid extract of mushroom G. lucidum NRRL66208. One hundred and three molecular...

A quantitative model and the experimental evaluation of the liquid fuel layer for the downward flame spread of XPS foam.

PubMed

Luo, Shengfeng; Xie, Qiyuan; Tang, Xinyi; Qiu, Rong; Yang, Yun

2017-05-05

The objective of this work is to investigate the distinctive mechanisms of downward flame spread for XPS foam. It was physically considered as a moving down of narrow pool fire instead of downward surface flame spread for normal solids. A method was developed to quantitatively analyze the accumulated liquid fuel based on the experimental measurement of locations of flame tips and burning rates. The results surprisingly showed that about 80% of the generated hot liquid fuel remained in the pool fire during a certain period. Most of the consumed solid XPS foam didn't really burn away but transformed as the liquid fuel in the downward moving pool fire, which might be an important promotion for the fast fire development. The results also indicated that the dripping propensity of the hot liquid fuel depends on the total amount of the hot liquid accumulated in the pool fire. The leading point of the flame front curve might be the breach of the accumulated hot liquid fuel if it is enough for dripping. Finally, it is suggested that horizontal noncombustible barriers for preventing the accumulation and dripping of liquid fuel are helpful for vertical confining of XPS fire. Copyright © 2017 Elsevier B.V. All rights reserved.

Be a Smart Consumer.

ERIC Educational Resources Information Center

DiPaola, Elizabeth Ann

This book was prepared especially for the students of the Marie Katzenbach School for the Deaf as a one-year course in consumer education. The purpose of the book is to provide students with necessary information and skills to make wise decisions as consumers in the areas of realizing consumer values and goals; evaluating advertising; managing…

Ames Energy: A Consumer's Guide to Energy Conservation.

ERIC Educational Resources Information Center

Women's Support Network, Inc., Santa Rosa, CA.

Presented is an annotated bibliography of energy-related materials for the consumer. Materials (which include books, videotape recordings, magazines, pamphlets, and other media) are arranged by subject area. These area include: (1) earth sheltered buildings; (2) fuels; (3) general (including general energy conservation and insulation); (4) heat…

Weaving New Retail and Consumer Landscapes in the Scottish Borders

ERIC Educational Resources Information Center

Findlay, Anne; Sparks, Leigh

2008-01-01

New retail locations and formats and changing consumer capabilities and behaviours (including "switching") have encouraged "outshopping" from rural to urban areas. Rural areas have been suffering from a decline in the provision of services, including retailing. One "solution" has been the strengthening of market towns…

Short communication: The effect of liquid storage on the flavor of whey protein concentrate.

PubMed

Park, Curtis W; Parker, Megan; Drake, MaryAnne

2016-06-01

Unit operations in dried dairy ingredient manufacture significantly influence sensory properties and, consequently, their use and consumer acceptance in a variety of ingredient applications. In whey protein concentrate (WPC) manufacture, liquid can be stored as whey or WPC before spray drying. The objective of this study was to determine the effect of storage, composition, and bleaching on the flavor of spray-dried WPC80. Liquid whey was manufactured and subjected to the following treatments: bleached or unbleached and liquid whey or liquid WPC storage. The experiment was replicated 3 times and included a no-storage control. All liquid storage was performed at 4°C for 24h. Flavor of the final spray-dried WPC80 was evaluated by a trained panel and volatile compound analyses. Storage of liquids increased cardboard flavor, decreased sweet aromatic flavor, and resulted in increased volatile lipid oxidation products. Bleaching altered the effect of liquid storage. Storage of unbleached liquid whey decreased sweet aromatic flavor and increased cardboard flavor and volatile lipid oxidation products compared with liquid WPC80 and no storage. In contrast, storage of bleached liquid WPC decreased sweet aromatic flavor and increased cardboard flavor and associated volatile lipid oxidation products compared with bleached liquid whey or no storage. These results confirm that liquid storage increases off-flavors in spray-dried protein but to a variable degree, depending on whether bleaching has been applied. If liquid storage is necessary, bleached WPC80 should be stored as liquid whey and unbleached WPC80 should be stored as liquid WPC to mitigate off-flavors. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Hybrid multiphase CFD simulation for liquid-liquid interfacial area prediction in annular centrifugal contactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wardle, K.E.

2013-07-01

Liquid-liquid contacting equipment used in solvent extraction processes has the dual purpose of mixing and separating two immiscible fluids. Consequently, such devices inherently encompass a wide variety of multiphase flow regimes. A hybrid multiphase computational fluid dynamics (CFD) solver which combines the Eulerian multi-fluid method with VOF (volume of fluid) sharp interface capturing has been developed for application to annular centrifugal contactors. This solver has been extended to enable prediction of mean droplet size and liquid-liquid interfacial area through a single moment population balance method. Simulations of liquid-liquid mixing in a simplified geometry and a model annular centrifugal contactor aremore » reported with droplet breakup/coalescence models being calibrated versus available experimental data. Quantitative comparison is made for two different housing vane geometries and it is found that the predicted droplet size is significantly smaller for vane geometries which result in higher annular liquid holdup.« less

Strategic planning and marketing research for older, inner-city health care facilities: a case study.

PubMed

Wood, V R; Robertson, K R

1992-01-01

Numerous health care facilities, located in downtown metropolitan areas, now find themselves surrounded by a decaying inner-city environment. Consumers may perceive these facilities as "old," and catering to an "urban poor" consumer. These same consumers may, therefore, prefer to patronize more modern facilities located in suburban areas. This paper presents a case study of such a health care facility and how strategic planning and marketing research were conducted in order to identify market opportunities and new strategic directions.

Consumer-oriented social data fusion: controlled learning in social environments, social advertising, and more

NASA Astrophysics Data System (ADS)

Grewe, L.

2013-05-01

This paper explores the current practices in social data fusion and analysis as it applies to consumer-oriented applications in a slew of areas including business, economics, politics, sciences, medicine, education and more. A categorization of these systems is proposed and contributions to each area are explored preceded by a discussion of some special issues related to social data and networks. From this work, future paths of consumer-based social data analysis research and current outstanding problems are discovered.

Impact of Wireless Power Transfer in Transportation: Future Transportation Enabler, or Near Term Distraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onar, Omer C; Jones, Perry T

2014-01-01

While the total liquid fuels consumed in the U.S. for transportation of goods and people is expected to hold steady, or decline slightly over the next few decades, the world wide consumption is projected to increase of over 30% according to the Annual Energy Outlook 2014 [1]. The balance of energy consumption for transportation between petroleum fuels and electric energy, and the related greenhouse gas (GHG) emissions produced consuming either, is of particular interest to government administrations, vehicle OEMs, and energy suppliers. The market adoption of plug-in electric vehicles (PEVs) appears to be inhibited by many factors relating to themore » energy storage system (ESS) and charging infrastructure. Wireless power transfer (WPT) technologies have been identified as a key enabling technology to increase the acceptance of EVs. Oak Ridge National Laboratory (ORNL) has been involved in many research areas related to understanding the impacts, opportunities, challenges and costs related to various deployments of WPT technology for transportation use. Though the initial outlook for WPT deployment looks promising, many other emerging technologies have met unfavorable market launches due to unforeseen technology limitations, sometimes due to the complex system in which the new technology was placed. This paper will summarize research and development (R&D) performed at ORNL in the area of Wireless Power Transfer (WPT). ORNL s advanced transportation technology R&D activities provide a unique set of experienced researchers to assist in the creation of a transportation system level view. These activities range from fundamental technology development at the component level to subsystem controls and interactions to applicable system level analysis of impending market and industry responses and beyond.« less

Kentucky Consumer & Homemaking Education. Management-Consumer Education. Curriculum Guide, Comprehensive Courses.

ERIC Educational Resources Information Center

Waldrop, Suzanne H.

Intended for use by teachers on the junior high and high school levels, this curriculum guide, which is one in a series of guides for consumer and homemaking education in Kentucky, outlines three courses in the area of management-consumer education. The junior high unit acquaints the student with the concepts of decision making and assessing…

Simulation of Liquid Level, Temperature and Pressure Inside a 2000 Liter Liquid Hydrogen Tank During Truck Transportation

NASA Astrophysics Data System (ADS)

Takeda, Minoru; Nara, Hiroyuki; Maekawa, Kazuma; Fujikawa, Shizuichi; Matsuno, Yu; Kuroda, Tsuneo; Kumakura, Hiroaki

Hydrogen is an ultimate energy source because only water is produced after the chemical reaction of hydrogen and oxygen. In the near future, a large amount of hydrogen, produced using sustainable/renewable energy, is expected to be consumed. Since liquid hydrogen (LH2) has the advantage of high storage efficiency, it is expected to be the ultimate medium for the worldwide storage and transportation of large amounts of hydrogen. To make a simulation model of the sloshing of LH2 inside a 2000 liter tank, simulation analyses of LH2 surface oscillation, temperature and pressure inside the tank during a truck transportation have been carried out using a multipurpose software ANSYS CFX. Numerical results are discussed in comparison with experimental results.

Novel Liquid Sorbent C02 Removal System for Microgravity Applications

NASA Technical Reports Server (NTRS)

Rogers, Tanya; Westover, Shayne; Graf, John

2017-01-01

Removing Carbon Dioxide (CO2) from a spacecraft environment for deep space exploration requires a robust system that is low in weight, power, and volume. Current state-of-the-art microgravity compatible CO2 removal systems, such as the carbon dioxide removal assembly (CDRA), utilize solid sorbents that demand high power usage due to high desorption temperatures and a large volume to accommodate for their comparatively low capacity for CO2. Additionally, solid sorbent systems contain several mechanical components that significantly reduce reliability and contribute to a large overall mass. A liquid sorbent based system has been evaluated as an alternative is proposed to consume 65% less power, weight, and volume than solid based CO2 scrubbers. This paper presents the design of a liquid sorbent CO2 removal system for microgravity applications.

Hanford Soil Inventory Model (SIM-v2) Calculated Radionuclide Inventory of Direct Liquid Discharges to Soil in the Hanford Site's 200 Areas.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, William E.; Zaher, U.; Agnew, S.

The Hanford soil inventory model (SIM) provides the basic radionuclide and chemical soil inventories from historical liquid discharges to about 400 sites at the Hanford Site. Although liquid discharge inventory for chemicals is part of the SIM implementation, only radionuclide inventory is discussed here since the focus of this ECF is on providing radionuclides inputs for the composite analysis (CA) per DOE Order 435.1, Radioactive Waste Management, requirements. Furthermore, discharged inventories are only estimated for the soluble portions of the liquid discharges to waste sites/waste management areas located on the 200 Area of the Hanford Site (Central Plateau).

Determination of fluorotelomer alcohols in selected consumer products and preliminary investigation of their fate in the indoor environment.

PubMed

Liu, Xiaoyu; Guo, Zhishi; Folk, Edgar E; Roache, Nancy F

2015-06-01

The U.S. Environmental Protection Agency (EPA) has established an ongoing effort to identify the major perfluorocarboxylic acid (PFCA) sources in nonoccupational indoor environments and characterize their transport and fate. This study determined the concentrations of fluorotelomer alcohols (FTOHs), which are the precursors to PFCAs, in fifty-four consumer products collected from the U.S. open market in the years of 2011 and 2013. The products included carpet, commercial carpet-care liquids, household carpet/fabric-care liquids, treated apparel, treated home textiles, treated non-woven medical garments, floor waxes, food-contact paper, membranes for apparel, and thread-sealant tapes. The FTOHs quantified were 1H,1H,2H,2H-perfluoro-1-octanol (6:2 FTOH), 1H,1H,2H,2H-perfluoro-1-decanol (8:2 FTOH), and 1H,1H,2H,2H-perfluoro-1-dodecanol (10:2 FTOH). The content of 6:2 FTOH ranged from non-delectable to 331μgg(-1), 8:2 FTOH from non-delectable to 92μgg(-1), and 10:2 FTOH from non-detectable to 24μgg(-1). In addition, two consumer products from the home textile category were tested in the washing-drying process. One product from the treated apparel category and one from the home textile category were tested in the micro-scale chamber under elevated temperatures. The experimental data show that the washing-drying process with one cycle did not significantly reduce the FTOH concentrations in the tested consumer products. FTOH off-gassing was observed under accelerated aging conditions. Future tests should include air sampling to allow determination of the absolute emission rates at different temperatures. The results of this study should be informative to exposure assessment and risk management. Published by Elsevier Ltd.

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Economically Depressed Areas Strand: Human Development: Module III-E-3: Resources for the Economically Depressed Family.

ERIC Educational Resources Information Center

Boogaert, John

This competency-based preservice home economics teacher education module on resources for the economically depressed area family is the third in a set of three modules on human development in economically depressed areas. (This set is part of a larger set of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking…

20. DECOMMISIONED HYDROGEN TANK IN FORMER LIQUID OXYGEN STORAGE AREA, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. DECOMMISIONED HYDROGEN TANK IN FORMER LIQUID OXYGEN STORAGE AREA, BETWEEN TEST STAND 1-A AND INSTRUMENTATION AND CONTROL BUILDING. Looking northwest. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

High performance discharges in the Lithium Tokamak eXperiment with liquid lithium walls

DOE PAGES

Schmitt, J. C.; Bell, R. E.; Boyle, D. P.; ...

2015-05-15

The first-ever successful operation of a tokamak with a large area (40% of the total plasma surface area) liquid lithium wall has been achieved in the Lithium Tokamak eXperiment (LTX). These results were obtained with a new, electron beam-based lithium evaporation system, which can deposit a lithium coating on the limiting wall of LTX in a five-minute period. Preliminary analyses of diamagnetic and other data for discharges operated with a liquid lithium wall indicate that confinement times increased by 10 x compared to discharges with helium-dispersed solid lithium coatings. Ohmic energy confinement times with fresh lithium walls, solid and liquid,more » exceed several relevant empirical scaling expressions. Spectroscopic analysis of the discharges indicates that oxygen levels in the discharges limited on liquid lithium walls were significantly reduced compared to discharges limited on solid lithium walls. Finally, Tokamak operations with a full liquid lithium wall (85% of the total plasma surface area) have recently started.« less

Advanced Life Support Technologies and Scenarios

NASA Technical Reports Server (NTRS)

Barta, Daniel J.

2011-01-01

As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Improving the efficiency of the recovery of water from spacecraft solid and liquid wastes is possible through use of emerging technologies such as the heat melt compactor and brine dewatering systems. Another significant consumable is that of food. Food production systems based on higher plants may not only contribute significantly to the diet, but also contribute to atmosphere revitalization, water purification and waste utilization. Bioreactors may be potentially utilized for wastewater and solid waste management. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

A Comprehensive Characterisation of Rosemary tea Obtained from Rosmarinus officinalis L. Collected in a sub-Humid Area of Tunisia.

PubMed

Achour, Mariem; Mateos, Raquel; Ben Fredj, Maha; Mtiraoui, Ali; Bravo, Laura; Saguem, Saad

2018-01-01

Rosemary (Rosmarinus officinalis L.) is an aromatic plant common in Tunisia and it is widely consumed as a tea in traditional cuisine and in folk medicine to treat various illnesses. Currently, most research efforts have been focused on rosemary essential oil, alcoholic and aqueous extracts, however, little is reported on rosemary infusion composition. To investigate compounds present in rosemary tea obtained from Rosmarinus officinalis L. collected in a sub-humid area of Tunisia in order to assess whether the traditional rosemary tea preparation method could be considered as a reference method for rosemary's compounds extraction. Qualitative characterisation of Rosmarinus officinalis tea obtained after rosemary infusion in boiled water was determined by high performance liquid chromatography coupled with electrospray ionisation quadrupole time-of-flight mass spectrometry (HPLC-ESI-QTOF-MS). Quantitative analysis relies on high performance liquid chromatography with diode array detector (HPLC-DAD). Forty-nine compounds belonging to six families, namely flavonoids, phenolic acids, phenolic terpenes, jasmonate, phenolic glycosides, and lignans were identified. To the best of the authors' knowledge eucommin A is characterised for the first time in rosemary. Rosmarinic acid (158.13 μg/g dried rosemary) was the main compound followed then by feruloylnepitrin (100.87 μg/g) and luteolin-3'-O-(2″-O-acetyl)-β-d-glucuronide (44.04 μg/g). Among quantified compounds, luteolin-7-O-rutinoside was the compound with the lowest concentration. The infusion method allows several polyphenols present in rosemary tea to be extracted, therefore it could be a reference method for rosemary's compounds extraction. Moreover, traditional Tunisian Rosmarinus officinalis tea consumption is of interest for its rich phenolic content. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

[Eating habits and the frequency of food consumption in 8th-grade schoolchildren from a Basic Health Area of Mataró].

PubMed

Boneu, M; Gómez-Quirante, A; Feijóo, N; Martos, C; Foz, G

1994-06-30

To find the food habits and the qualitative food consumption of 8th-year school students, covered by a Base Health Area in Mataró (Barcelona), as the basis for a programme of health education. A descriptive study, carried out by means of an open questionnaire on the frequency of food consumption over three consecutive days in a week, on an individual basis, self-filled and of a prospective character. The schools within the catchment area of a Base Health Area in Mataró (Barcelona). All the 8th-year EGB students of those schools (216). 180 students answered the questionnaire. Four were excluded for not meeting the conditions laid out. There were 81.4% of valid questionnaires. 98.2% did not have a healthy diet. 64% consumed milk products or derivatives once or less per day. 88.6% consumed raw vegetables less than once a day. 86.9% consumed cooked vegetables less than once per day. 40% consumed fresh fruit less than once per day and 55.1% consumed animal proteins less than once per day. 34.6% consumed two or more units per day of cakes or buns and 21.6% consumed three or more units per day of sweets. 31% did not vary their breakfast and 12% took nothing solid for breakfast on at least one of the study's three days. 13.1% did not vary their evening meal and 17% took nothing solid for their evening meal on at least one of the three days. The results of this study show not very healthy eating habits, with insufficient consumption of milk products, vegetables and fruit and a an insufficient breakfast.

Direct writing of flexible electronics through room temperature liquid metal ink.

PubMed

Gao, Yunxia; Li, Haiyan; Liu, Jing

2012-01-01

Conventional approaches of making a flexible circuit are generally complex, environment unfriendly, time and energy consuming, and thus expensive. Here, we describe for the first time the method of using high-performance GaIn(10)-based electrical ink, a significantly neglected room temperature liquid metal, as both electrical conductors and interconnects, for directly writing flexible electronics via a rather easy going and cost effective way. The new generation electric ink was made and its wettability with various materials was modified to be easily written on a group of either soft or rigid substrates such as epoxy resin board, glass, plastic, silica gel, paper, cotton, textiles, cloth and fiber etc. Conceptual experiments were performed to demonstrate and evaluate the capability of directly writing the electrical circuits via the invented metal ink. Mechanisms involved were interpreted through a series of fundamental measurements. The electrical resistivity of the fluid like GaIn(10)-based material was measured as 34.5 µΩ·cm at 297 K by four point probe method and increased with addition of the oxygen quantity, which indicates it as an excellent metal ink. The conductive line can be written with features that are approximately 10 µm thick. Several functional devices such as a light emitting diode (LED) array showing designed lighting patterns and electrical fan were made to work by directly writing the liquid metal on the specific flexible substrates. And satisfactory performances were obtained. The present method opens the way to directly and quickly writing flexible electronics which can be as simple as signing a name or drawing a picture on the paper. The unique merit of the GaIn(10)-based liquid metal ink lies in its low melting temperature, well controlled wettability, high electrical conductivity and good biocompability. The new electronics writing strategy and basic principle has generalized purpose and can be extended to more industrial areas, even daily life.

Direct Writing of Flexible Electronics through Room Temperature Liquid Metal Ink

PubMed Central

Gao, Yunxia; Li, Haiyan; Liu, Jing

2012-01-01

Background Conventional approaches of making a flexible circuit are generally complex, environment unfriendly, time and energy consuming, and thus expensive. Here, we describe for the first time the method of using high-performance GaIn10-based electrical ink, a significantly neglected room temperature liquid metal, as both electrical conductors and interconnects, for directly writing flexible electronics via a rather easy going and cost effective way. Methods The new generation electric ink was made and its wettability with various materials was modified to be easily written on a group of either soft or rigid substrates such as epoxy resin board, glass, plastic, silica gel, paper, cotton, textiles, cloth and fiber etc. Conceptual experiments were performed to demonstrate and evaluate the capability of directly writing the electrical circuits via the invented metal ink. Mechanisms involved were interpreted through a series of fundamental measurements. Results The electrical resistivity of the fluid like GaIn10-based material was measured as 34.5 µΩ·cm at 297 K by four point probe method and increased with addition of the oxygen quantity, which indicates it as an excellent metal ink. The conductive line can be written with features that are approximately 10 µm thick. Several functional devices such as a light emitting diode (LED) array showing designed lighting patterns and electrical fan were made to work by directly writing the liquid metal on the specific flexible substrates. And satisfactory performances were obtained. Conclusions The present method opens the way to directly and quickly writing flexible electronics which can be as simple as signing a name or drawing a picture on the paper. The unique merit of the GaIn10-based liquid metal ink lies in its low melting temperature, well controlled wettability, high electrical conductivity and good biocompability. The new electronics writing strategy and basic principle has generalized purpose and can be extended to more industrial areas, even daily life. PMID:23029044

Computerized Liquid Crystal Phase Identification by Neural Networks Analysis of Polarizing Microscopy Textures

NASA Astrophysics Data System (ADS)

Karaszi, Zoltan; Konya, Andrew; Dragan, Feodor; Jakli, Antal; CPIP/LCI; CS Dept. of Kent State University Collaboration

Polarizing optical microscopy (POM) is traditionally the best-established method of studying liquid crystals, and using POM started already with Otto Lehman in 1890. An expert, who is familiar with the science of optics of anisotropic materials and typical textures of liquid crystals, can identify phases with relatively large confidence. However, for unambiguous identification usually other expensive and time-consuming experiments are needed. Replacement of the subjective and qualitative human eye-based liquid crystal texture analysis with quantitative computerized image analysis technique started only recently and were used to enhance the detection of smooth phase transitions, determine order parameter and birefringence of specific liquid crystal phases. We investigate if the computer can recognize and name the phase where the texture was taken. To judge the potential of reliable image recognition based on this procedure, we used 871 images of liquid crystal textures belonging to five main categories: Nematic, Smectic A, Smectic C, Cholesteric and Crystal, and used a Neural Network Clustering Technique included in the data mining software package in Java ``WEKA''. A neural network trained on a set of 827 LC textures classified the remaining 44 textures with 80% accuracy.

Thumbnail Sketches: EDTA-Type Chelating Agents in Everyday Consumer Products: Some Food, Cleaning, and Photographic Applications.

ERIC Educational Resources Information Center

Hart, J. Roger

1985-01-01

Discusses the role of chelating agents in (1) mayonnaise and salad dressings; (2) canned legumes; (3) plant foods; (4) liquid dishwashing detergents; (5) toilet soaps; (6) floor wax removers; (7) hard surface cleaners; (8) carpet cleaning; (9) bathtub and tile cleaners; and (10) photography. (JN)

Determination of Beet Root Betanin in Dairy Products by High-Performance Liquid Chromatography (HPLC)

ERIC Educational Resources Information Center

Gandia-Herrero, Fernando; Simon-Carrillo, Ana; Escribano, Josefa; Garcia-Carmona, Francisco

2012-01-01

The food industry uses different additives to give foods and beverages the appearance expected by the consumer. Among them, pigments of natural origin are receiving increasing attention due to safety concerns about traditional colorants and the relevance of a healthy diet. This experiment describes the quantitative determination of the…

The Camp Pendleton Experiment in Battalion Level Field Feeding

DTIC Science & Technology

1976-07-01

regard to the scrambled egg component. The only positive rating received on the MCI was for the fruit component. 3. Consumers located at the remote sites...and (2) redesign to prevent liquid items, like scrambled egg mix, from running down the grease drain. Steam Tables The steam tables were designed to

Corecovery of lipids and fermentable sugars from Rhodosporidium toruloides using ionic liquid cosolvents: application of recycle to batch fermentation.

PubMed

Severa, Godwin; Kumar, Guneet; Cooney, Michael J

2014-01-01

This work evaluates the ability of an ionic liquid-methanol cosolvent system to extract lipids and recycle fermentable sugars recovered from oil-bearing Rhodosporidium toruloides grown in batch culture on defined media using glucose and xylose as carbon sources. Growth on the recycled mixed carbon substrate was successful with glucose consumed before xylose and overall cell mass to lipid yields (YP/X ) between 57% and 61% (w/w relative to whole dried cell mass) achieved. Enzymatic hydrolysis of the delipified carbohydrate fraction recovered approximately 9%-11% (w/w) of the whole dried cell mass as fermentable sugars, which were successfully recycled as carbon sources without further purification. In total, up to 70% (w/w) of the whole dried cell mass was recovered as lipids and fermentable sugars and the substrate to lipid yields (YP/S ) was increased from 0.12 to 0.16 g lipid/g carbohydrate consumed, highlighting the promise of this approach to process lipid bearing cell biomass. © 2014 American Institute of Chemical Engineers.

Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter.

PubMed

Priftis, Alexandros; Stagos, Dimitrios; Tzioumakis, Nikolaos; Konstantinopoulos, Konstantinos; Patouna, Anastasia; Papadopoulos, Georgios E; Tsatsakis, Aristides; Kouretas, Dimitrios

2016-08-30

Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices) in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

The energetic consequences of habitat structure for forest stream salmonids.

PubMed

Naman, Sean M; Rosenfeld, Jordan S; Kiffney, Peter M; Richardson, John S

2018-05-08

1.Increasing habitat availability (i.e. habitat suitable for occupancy) is often assumed to elevate the abundance or production of mobile consumers; however, this relationship is often nonlinear (threshold or unimodal). Identifying the mechanisms underlying these nonlinearities is essential for predicting the ecological impacts of habitat change, yet the functional forms and ultimate causation of consumer-habitat relationships are often poorly understood. 2.Nonlinear effects of habitat on animal abundance may manifest through physical constraints on foraging that restrict consumers from accessing their resources. Subsequent spatial incongruence between consumers and resources should lead to unimodal or saturating effects of habitat availability on consumer production if increasing the area of habitat suitable for consumer occupancy comes at the expense of habitats that generate resources. However, the shape of this relationship could be sensitive to cross-ecosystem prey subsidies, which may be unrelated to recipient habitat structure and result in more linear habitat effects on consumer production. 3.We investigated habitat-productivity relationships for juveniles of stream-rearing Pacific salmon and trout (Oncorhynchus spp.), which typically forage in low-velocity pool habitats, while their prey (drifting benthic invertebrates) are produced upstream in high-velocity riffles. However, juvenile salmonids also consume subsidies of terrestrial invertebrates that may be independent of pool-riffle structure. 4.We measured salmonid biomass production in 13 experimental enclosures each containing a downstream pool and upstream riffle, spanning a gradient of relative pool area (14-80% pool). Increasing pool relative to riffle habitat area decreased prey abundance, leading to a nonlinear saturating effect on fish production. We then used bioenergetics model simulations to examine how the relationship between pool area and salmonid biomass is affected by varying levels of terrestrial subsidy. Simulations indicated that increasing terrestrial prey inputs linearized the effect of habitat availability on salmonid biomass, while decreasing terrestrial inputs exaggerated a 'hump-shaped' effect. 5.Our results imply that nonlinear effects of habitat availability on consumer production can arise from trade-offs between habitat suitable for consumer occupancy and habitat that generates prey. However, cross-ecosystem prey subsidies can effectively decouple this trade-off and modify consumer-habitat relationships in recipient systems. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Influence of surfactant on the thermal behavior of marigold oil emulsions with liquid crystal phases.

PubMed

dos Santos, Orlando David Henrique; da Rocha-Filho, Pedro Alves

2007-05-01

Vegetable oils have been largely consumed owing to the interest of pharmaceutical and cosmetic industries in using natural raw materials. The production of stable emulsions with vegetable oils challenges formulators due to its variability in composition and fatty acids constitution within batches produced. In the present work, it was studied that the influence of the size of carbon chain and the number of ethylene oxide moieties of the surfactant on the thermal behavior of eight emulsions prepared with marigold oil stabilized by liquid crystal phases. Differential scanning calorimetry (DSC) was used to determine the thermal behavior of the emulsions. The ratio of bound water was calculated, being between 29.0 and 42.0%, confirming the extension of the liquid-crystalline net in the external phase. Changing the lipophilic surfactant from Ceteth-2 to Steareth-2, there was an increase in the temperature of phase transition of the liquid crystal influencing the system stability. Calorimetric study is very useful in understanding the performance of liquid crystals with the increase of temperature and to estimate emulsions stability.

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity.

PubMed

Zhang, Hui; Gao, Shecheng; Luo, Yunhan; Chen, Zhenshi; Xiong, Songsong; Wan, Lei; Huang, Xincheng; Huang, Bingsen; Feng, Yuanhua; He, Miao; Liu, Weiping; Chen, Zhe; Li, Zhaohui

2018-04-17

A liquid-filled D-shaped fiber (DF) cavity serving as an in-fiber Mach–Zehnder interferometer (MZI) has been proposed and experimentally demonstrated for temperature sensing with ultrahigh sensitivity. The miniature MZI is constructed by splicing a segment of DF between two single-mode fibers (SMFs) to form a microcavity (MC) for filling and replacement of various refractive index (RI) liquids. By adjusting the effective RI difference between the DF and MC (the two interference arms), experimental and calculated results indicate that the interference spectra show different degrees of temperature dependence. As the effective RI of the liquid-filled MC approaches that of the DF, temperature sensitivity up to −84.72 nm/°C with a linear correlation coefficient of 0.9953 has been experimentally achieved for a device with the MC length of 456 μm, filled with liquid RI of 1.482. Apart from ultrahigh sensitivity, the proposed MCMZI device possesses additional advantages of its miniature size and simple configuration; these features make it promising and competitive in various temperature sensing applications, such as consumer electronics, biological treatments, and medical diagnosis.

Planning Guide for Consumer Education...Grades K-12: A Pilot Program Developed in the Westborough Public Schools.

ERIC Educational Resources Information Center

Framingham State Coll., MA.

Suggested learning activities for teaching consumer education to K-12 students which can be integrated into the regular curriculum are provided in the guide. The guide is divided into four areas which focus on the different roles of the consumer: (1) the consumer's values and goals--self-development, health and safety, decision making, and…

Restructured low-fat cooked ham containing liquid whey fortified with lactulose.

PubMed

Oliveira, Cristiane A; Massingue, Armando A; Moura, Ana Paula R; Fontes, Paulo Rogério; Ramos, Alcinéia Ls; Ramos, Eduardo M

2018-01-01

Current health concerns have driven consumers to request products with nutritional and physiological advantages, which can be achieved by using prebiotic ingredients. Lactulose is a prebiotic with excellent functional properties and can be easily incorporated into meat products through the addition of liquid whey. This study investigated the technological and sensorial quality of restructured cooked ham elaborated without liquid whey added (control) and with liquid whey containing different contents (0, 30, 60 and 100 g kg -1 ) of lactulose. Liquid whey did not change any technological or sensorial characteristics of the product, but the general acceptability decreased due to addition of lactulose. Samples with higher lactulose concentrations had lower moisture content, pH and refreezing loss and increased carbohydrate content. Control and whey added samples had higher lightness and lower intense color than samples with lactulose. Liquid whey additions with higher lactulose content increased hardness and chewiness of the samples. Restructured cooked hams formulated with liquid whey and 30 g kg -1 of lactulose had minimal effects on the technological properties and sensory characteristics and, due to the possible benefits conferred by the prebiotic, is a potential alternative to provide meat products with prebiotic activity. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Local Area Water Removal Analysis of a Proton Exchange Membrane Fuel Cell under Gas Purge Conditions

PubMed Central

Lee, Chi-Yuan; Lee, Yu-Ming; Lee, Shuo-Jen

2012-01-01

In this study, local area water content distribution under various gas purging conditions are experimentally analyzed for the first time. The local high frequency resistance (HFR) is measured using novel micro sensors. The results reveal that the liquid water removal rate in a membrane electrode assembly (MEA) is non-uniform. In the under-the-channel area, the removal of liquid water is governed by both convective and diffusive flux of the through-plane drying. Thus, almost all of the liquid water is removed within 30 s of purging with gas. However, liquid water that is stored in the under-the-rib area is not easy to remove during 1 min of gas purging. Therefore, the re-hydration of the membrane by internal diffusive flux is faster than that in the under-the-channel area. Consequently, local fuel starvation and membrane degradation can degrade the performance of a fuel cell that is started from cold. PMID:22368495

Local area water removal analysis of a proton exchange membrane fuel cell under gas purge conditions.

PubMed

Lee, Chi-Yuan; Lee, Yu-Ming; Lee, Shuo-Jen

2012-01-01

In this study, local area water content distribution under various gas purging conditions are experimentally analyzed for the first time. The local high frequency resistance (HFR) is measured using novel micro sensors. The results reveal that the liquid water removal rate in a membrane electrode assembly (MEA) is non-uniform. In the under-the-channel area, the removal of liquid water is governed by both convective and diffusive flux of the through-plane drying. Thus, almost all of the liquid water is removed within 30 s of purging with gas. However, liquid water that is stored in the under-the-rib area is not easy to remove during 1 min of gas purging. Therefore, the re-hydration of the membrane by internal diffusive flux is faster than that in the under-the-channel area. Consequently, local fuel starvation and membrane degradation can degrade the performance of a fuel cell that is started from cold.

Consumable and Refundable Supplies Items for Production Agriculture Mechanics Laboratories as Influenced by Selected Characteristics of Vocational Agriculture Program and Teacher. Final Report.

ERIC Educational Resources Information Center

Gerstenlauer, David L.

This study was conducted to develop a list of basic consumable and refundable supplies to be used in a secondary agricultural production mechanics laboratory program in Pennsylvania. A total of 72 surveys were sent to selected teachers: 24 in the area of woodworking, 24 in the area of metal working, and 24 covering all other areas of agricultural…

Global pattern of plant utilization across different organisms: Does plant apparency or plant phylogeny matter?

PubMed

Dai, Xiaohua; Zhang, Wei; Xu, Jiasheng; Duffy, Kevin J; Guo, Qingyun

2017-04-01

The present study is the first to consider human and nonhuman consumers together to reveal several general patterns of plant utilization. We provide evidence that at a global scale, plant apparency and phylogenetic isolation can be important predictors of plant utilization and consumer diversity. Using the number of species or genera or the distribution area of each plant family as the island "area" and the minimum phylogenetic distance to common plant families as the island "distance", we fitted presence-area relationships and presence-distance relationships with a binomial GLM (generalized linear model) with a logit link. The presence-absence of consumers among each plant family strongly depended on plant apparency (family size and distribution area); the diversity of consumers increased with plant apparency but decreased with phylogenetic isolation. When consumers extended their host breadth, unapparent plants became more likely to be used. Common uses occurred more often on common plants and their relatives, showing higher host phylogenetic clustering than uncommon uses. On the contrary, highly specialized uses might be related to the rarity of plant chemicals and were therefore very species-specific. In summary, our results provide a global illustration of plant-consumer combinations and reveal several general patterns of plant utilization across humans, insects and microbes. First, plant apparency and plant phylogenetic isolation generally govern plant utilization value, with uncommon and isolated plants suffering fewer parasites. Second, extension of the breadth of utilized hosts helps explain the presence of consumers on unapparent plants. Finally, the phylogenetic clustering structure of host plants is different between common uses and uncommon uses. The strength of such consistent plant utilization patterns across a diverse set of usage types suggests that the persistence and accumulation of consumer diversity and use value for plant species are determined by similar ecological and evolutionary processes.

16 CFR 1304.1 - Scope and application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in commerce; (2) that they present an unreasonable risk of injury; and (3) that no feasible consumer... labeled as, marketed, and sold solely for industrial use in non-consumer environments are not subject to..., hospitals, public buildings or other areas where consumers have customary access. ...

Measurement of gas-liquid partition coefficient and headspace concentration profiles of perfume materials by solid-phase microextraction and capillary gas chromatography-mass spectrometry

PubMed

Liu; Wene

2000-09-01

An empirical model describing the relationship between the partition coefficients (K) of perfume materials in the solid-phase microextraction (SPME) fiber stationary phase and the Linearly Temperature Programmed Retention Index (LTPRI) is obtained. This is established using a mixture of eleven selected fragrance materials spiked in mineral oil at different concentration levels to simulate liquid laundry detergent matrices. Headspace concentrations of the materials are measured using both static headspace and SPME-gas chromatography analysis. The empirical model is tested by measuring the K values for fourteen perfume materials experimentally. Three of the calculated K values are within 2-19% of the measured K value, and the other eleven calculated K values are within 22-59%. This range of deviation is understandable because a diverse mixture was used to cover most chemical functionalities in order to make the model generally applicable. Better prediction accuracy is expected when a model is established using a specific category of compounds, such as hydrocarbons or aromatics. The use of this method to estimate distribution constants of fragrance materials in liquid matrices is demonstrated. The headspace SPME using the established relationship between the gas-liquid partition coefficient and the LTPRI is applied to measure the headspace concentration of fragrances. It is demonstrated that this approach can be used to monitor the headspace perfume profiles over consumer laundry and cleaning products. This method can provide high sample throughput, reproducibility, simplicity, and accuracy for many applications for screening major fragrance materials over consumer products. The approach demonstrated here can be used to translate headspace SPME results into true static headspace concentration profiles. This translation is critical for obtaining the gas-phase composition by correcting for the inherent differential partitioning of analytes into the fiber stationary phase.

Correlation of liquid chromatographic and biological assay for potency assessment of filgrastim and related impurities.

PubMed

Skrlin, Ana; Kosor Krnic, Ela; Gosak, Darko; Prester, Berislav; Mrsa, Vladimir; Vuletic, Marko; Runac, Domagoj

2010-11-02

In vivo and in vitro potency assays have always been a critical tool for confirmation of protein activity. However, due to their complexity and time consuming procedures, it remains a challenge to find an alternative analytical approach that would enable their replacement with no impact on the quality of provided information. The goal of this research was to determine if a correlation between liquid chromatography assays and in vitro biological assay could be established for filgrastim (recombinant human granulocyte-colony stimulating factor, rhG-CSF) samples containing various amounts of related impurities. For that purpose, relevant filgrastim related impurities were purified to homogeneity and characterized by liquid chromatography and mass spectrometry. A significant correlation (R(2)>0.90) between the two types of assays was revealed. Potency of oxidized filgrastim was determined to be approximately 25% of filgrastim stated potency (1 x 10(8)IU/mg of protein). Formyl-methionine filgrastim had potency of 89% of the filgrastim stated potency, while filgrastim dimer had 67% of filgrastim stated potency. A mathematical model for the estimation of biological activity of filgrastim samples from chromatography data was established and a significant correlation between experimental potency values and potency values estimated by the mathematical model was obtained (R(2)=0.92). Based on these results a conclusion was made that reversed phase high performance liquid chromatography could be used as an alternative for the in vitro biological assay for potency assessment of filgrastim samples. Such an alternative model would enable substitution of a complex and time consuming biological assay with a robust and precise instrumental method in many practical cases. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Ultrasonic probe deployment device for increased wave transmission and rapid area scan inspections

DOEpatents

DiMambro, Joseph; Roach, Dennis P; Rackow, Kirk A; Nelson, Ciji L; Dasch, Cameron J; Moore, David G

2013-02-12

An ultrasonic probe deployment device in which an ultrasound-transmitting liquid forms the portion of the ultrasonic wave path in contact with the surface being inspected (i.e., the inspection surface). A seal constrains flow of the liquid, for example preventing the liquid from surging out and flooding the inspection surface. The seal is not rigid and conforms to variations in the shape and unevenness of the inspection surface, thus forming a seal (although possibly a leaky seal) around the liquid. The probe preferably is held in place to produce optimum ultrasonic focus on the area of interest. Use of encoders can facilitate the production of C-scan area maps of the material being inspected.

Ultrasonic probe deployment device for increased wave transmission and rapid area scan inspections

DOEpatents

DiMambro, Joseph [Placitas, NM; Roach, Dennis P [Albuquerque, NM; Rackow, Kirk A [Albuquerque, NM; Nelson, Ciji L [Albuquerque, NM; Dasch, Cameron J [Boomfield Hills, MI; Moore, David G [Albuquerque, NM

2012-01-03

An ultrasonic probe deployment device in which an ultrasound-transmitting liquid forms the portion of the ultrasonic wave path in contact with the surface being inspected (i.e., the inspection surface). A seal constrains flow of the liquid, for example preventing the liquid from surging out and flooding the inspection surface. The seal is not rigid and conforms to variations in the shape and unevenness of the inspection surface, thus forming a seal (although possibly a leaky seal) around the liquid. The probe preferably is held in place to produce optimum ultrasonic focus on the area of interest. Use of encoders can facilitate the production of C-scan area maps of the material being inspected.

Membranes for Food and Bioproduct Processing

NASA Astrophysics Data System (ADS)

Avram, Alexandru M.

Modified membranes for process intensification in biomass hydrolysis: Production of biofuels and chemicals from lignocellulosic biomass is one of the leading candidates for replacement of petroleum based fuels and chemicals. However, conversion of lignocellulosic biomass into fuels and chemicals is not cost effective compared to the production of fuels and chemicals from crude oil reserves. Some novel and economically feasible approaches involve the use of ionic liquids as solvents or co-solvents, since these show improved solvation capability of cellulose over simple aqueous systems. Membranes offer unique opportunities for process intensification which involves fractionation of the resulting biomass hydrolysate leading to a more efficient and cheaper operation. This research attempts to develop membranes that would usher the economics of the biochemical conversion of lignocellulosic biomass into fuels and chemicals by recycling the expensive ionic liquid. The overall aim of this work is the development of novel membranes with unique surface properties that enable the selective separation of non-reacted cellulose and hydrolysis sugars from ionic liquids. Nanofiltration separation for application in food product engineering: With the advent of the modern, well-informed consumer who has high expectations from the nutritional value of consumed food products, novel approaches are being developed to produce nutrient-enhanced foods and drinks. As a response to the consumer needs, different techniques to recover, concentrate and retain as much as possible of bioactive compounds are being investigated. Membrane technology has the advantage of selective fractionation of food products (e.g. salt removal, removal of bitter-tasting compounds or removal of sugar for sweet taste adjustment), volume reduction, and product recovery at mild conditions. In this work, we use nanofiltration in dead-end and crossflow mode to concentrate polyphenols from blueberry pomace. Blueberry pomace is an overlooked waste product form the juice pressing of blueberries that contains high amounts of health-beneficial antioxidants. We aim at developing a simple, yet efficient membrane process that reduces the amount of water and thus concentrates the amount of polyphenols in the retentate.

Optimization and validation of an extraction method for the analysis of polycyclic aromatic hydrocarbons in chocolate candies.

PubMed

Kumari, Rupender; Chaturvedi, Prashant; Ansari, Nasreen G; Murthy, Ramesh C; Patel, Devendra K

2012-01-01

Chocolate is a key ingredient in many foods such as milk shakes, candies, bars, cookies, and cereals. Chocolate candies are often consumed by mankind of all age groups. The presence of polycyclic aromatic hydrocarbons (PAHs) in chocolate candies may result in health risk to people. A rapid, precise, and economic extraction method was optimized and validated for the simultaneous determination of polycyclic aromatic hydrocarbons in chocolate candy by high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GS-MS) as a confirmatory technique. The method was optimized by using different solvents for liquid-liquid extraction, varying volume of de-emulsifying agent, and quantity of silica gel used for purification. The HPLC separation of 16 PAHs was carried out by C-18 column with mobile phase composed of acetonitrile : water (70 : 30) in isocratic mode with runtime of 20 min. Limit of detection, limit of quantification (LOQ), and correlation coefficients were found in the range of 0.3 to 4 ng g⁻¹, 0.9 to 12 ng g⁻¹, and 0.9109 to 0.9952, respectively. The exploration of 25 local chocolate candy samples for the presence of PAHs showed the mean content of benzo[a]pyrene as 1.62 ng g⁻¹, which representing the need to evaluate effective measures to prevent more severe PAHs contamination in chocolate candies in future. Chocolate is one of the most favorite food items among people, especially children. Chocolate candies are often consumed by mankind of all age groups. Chocolate candies are often consumed by children in large quantities. The presence PAHs in chocolate candies may result in health risk to people. In the present study, a precise and cost effective rapid method was employed for the determination of PAHs, which can be employed for daily routine analysis of PAHs in chocolate products. © 2011 Institute of Food Technologists®

Use of electronic cigarettes (e-cigarettes) impairs indoor air quality and increases FeNO levels of e-cigarette consumers.

PubMed

Schober, Wolfgang; Szendrei, Katalin; Matzen, Wolfgang; Osiander-Fuchs, Helga; Heitmann, Dieter; Schettgen, Thomas; Jörres, Rudolf A; Fromme, Hermann

2014-07-01

Despite the recent popularity of e-cigarettes, to date only limited data is available on their safety for both users and secondhand smokers. The present study reports a comprehensive inner and outer exposure assessment of e-cigarette emissions in terms of particulate matter (PM), particle number concentrations (PNC), volatile organic compounds (VOC), polycyclic aromatic hydrocarbons (PAH), carbonyls, and metals. In six vaping sessions nine volunteers consumed e-cigarettes with and without nicotine in a thoroughly ventilated room for two hours. We analyzed the levels of e-cigarette pollutants in indoor air and monitored effects on FeNO release and urinary metabolite profile of the subjects. For comparison, the components of the e-cigarette solutions (liquids) were additionally analyzed. During the vaping sessions substantial amounts of 1,2-propanediol, glycerine and nicotine were found in the gas-phase, as well as high concentrations of PM2.5 (mean 197 μg/m(3)). The concentration of putative carcinogenic PAH in indoor air increased by 20% to 147 ng/m(3), and aluminum showed a 2.4-fold increase. PNC ranged from 48,620 to 88,386 particles/cm(3) (median), with peaks at diameters 24-36 nm. FeNO increased in 7 of 9 individuals. The nicotine content of the liquids varied and was 1.2-fold higher than claimed by the manufacturer. Our data confirm that e-cigarettes are not emission-free and their pollutants could be of health concern for users and secondhand smokers. In particular, ultrafine particles formed from supersaturated 1,2-propanediol vapor can be deposited in the lung, and aerosolized nicotine seems capable of increasing the release of the inflammatory signaling molecule NO upon inhalation. In view of consumer safety, e-cigarettes and nicotine liquids should be officially regulated and labeled with appropriate warnings of potential health effects, particularly of toxicity risk in children. Copyright © 2013 Elsevier GmbH. All rights reserved.

Environmental Control and Life Support Systems for Mars Exploration: Issues and Concerns for Planetary Protection and the Protection of Science

NASA Astrophysics Data System (ADS)

Barta, Daniel J.; Lange, Kevin; Anderson, Molly; Vonau, Walter

2016-07-01

Planetary protection represents an additional set of requirements that generally have not been considered by developers of technologies for Environmental Control and Life Support Systems (ECLSS). Forward contamination concerns will affect release of gases and discharge of liquids and solids, including what may be left behind after planetary vehicles are abandoned upon return to Earth. A crew of four using a state of the art ECLSS could generate as much as 4.3 metric tons of gaseous, liquid and solid wastes and trash during a 500-day surface stay. These may present issues and concerns for both planetary protection and planetary science. Certainly, further closure of ECLSS systems will be of benefit by greater reuse of consumable products and reduced generation of waste products. It can be presumed that planetary protection will affect technology development by constraining how technologies can operate: limiting or prohibiting certain kinds of operations or processes (e.g. venting); necessitating that other kinds of operations be performed (e.g. sterilization; filtration of vent lines); prohibiting what can be brought on a mission (e.g. extremophiles); creating needs for new capabilities/ technologies (e.g. containment). Although any planned venting could include filtration to eliminate micro-organisms from inadvertently exiting the spacecraft, it may be impossible to eliminate or filter habitat structural leakage. Filtration will add pressure drops impacting size of lines and ducts, affect fan size and energy requirements, and add consumable mass. Technologies that may be employed to remove biomarkers and microbial contamination from liquid and solid wastes prior to storage or release may include mineralization technologies such as incineration, super critical wet oxidation and pyrolysis. These technologies, however, come with significant penalties for mass, power and consumables. This paper will estimate the nature and amounts of materials generated during Mars transit and surface stays that may be impacted by planetary protection requirements or be controlled for the protection of planetary science.

C18-coated stir bar sorptive extraction combined with high performance liquid chromatography-electrospray tandem mass spectrometry for the analysis of sulfonamides in milk and milk powder.

PubMed

Yu, Chunhe; Hu, Bin

2012-02-15

A simple, rapid, sensitive, inexpensive and less sample consuming method of C(18)-stir bar sorptive extraction (SBSE)-high performance liquid chromatography (HPLC)-tandem mass spectrometry (MS/MS) was proposed for the determination of six sulfonamides in milk and milk powder samples. C(18) silica particles coated stir bar was prepared by adhesion method, and two kinds of adhesive glue, polydimethylsiloxane (PDMS) sol and epoxy glue were tried. It was found that the C(18)-coated stir bar prepared by PDMS sol as adhesive glue is more robust than that prepared by epoxy glue when liquid desorption was employed, in terms of both lifetime and organic solvent tolerance. The preparation of C(18) stir bar was simple with good mechanic strength and the stir bar could be reused for more than 20 times. Granular coating has relatively high specific surface area and is propitious to sorptive extraction based process. Compared to conventional PDMS SBSE coating, C(18) coating shows good affinity to the target polar/weak polar sulfonamides. To achieve optimum SBSE extraction performance, several parameters including extraction and desorption time, ionic strength, sample pH and stirring speed were investigated. The detection limits of the proposed method for six sulfonamides were in the range of 0.9-10.5 μg/L for milk and 2.7-31.5 μg/kg for milk powder. Good linearities were obtained for sulfonamides with the correlation coefficients (R) above 0.9922. Finally, the proposed method was successfully applied to the determination of sulfonamides in milk and milk powder samples and satisfied recoveries of spiked target compounds in real samples were obtained. Copyright © 2012 Elsevier B.V. All rights reserved.

Liquid meal composition, postprandial satiety hormones, and perceived appetite and satiety in obese women during acute caloric restriction.

PubMed

Heden, Timothy D; Liu, Ying; Sims, Lauren; Kearney, Monica L; Whaley-Connell, Adam T; Chockalingam, Anand; Dellsperger, Kevin C; Fairchild, Timothy J; Kanaley, Jill A

2013-04-01

The purpose of this study was to compare postprandial satiety regulating hormone responses (pancreatic polypeptide (PP) and peptide tyrosine tyrosine (PYY)) and visual analog scale- (VAS) assessed perceived appetite and satiety between liquid high-protein (HP) and high-carbohydrate (HC) meals in obese women during acute (24-h) caloric restriction. Eleven obese premenopausal women completed two conditions in random order in which they consumed 1500 calories as six 250-calorie HP meals or six 250-calorie HC meals over a 12-h period. Blood samples were taken at baseline and every 20 min thereafter and analyzed for PP and PYY concentrations. At these same points, perceived hunger and fullness were assessed with a VAS. The incremental area under the curve (iAUC) was used to compare postprandial responses. The 12-h PP and PYY iAUC were greater (P≤0.05) during the HP condition (PP: 4727±1306 pg/ml×12 h, PYY: 1373±357 pg/ml×12 h) compared with the HC condition (PP: 2300±528 pg/ml×12 h, PYY: 754±246 pg/ml×12 h). Perceived hunger and fullness were not different between conditions (P>0.05). The greatest changes in PYY and perceived fullness occurred after the morning meals during both conditions. These data suggest that in obese women during acute caloric restriction before weight loss, i) liquid HP meals, compared with HC meals, result in greater postprandial PP and PYY concentrations, an effect not associated with differential appetite or satiety responses, and ii) meal-induced changes in PYY and satiety are greatest during the morning period, regardless of dietary macronutrient composition.

Guidelines for Consumer Education. Revised.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield.

This guide is intended to assist school personnel by clarifying issues, provide directions in basic information, and stimulate practical considerations for the learner in the area of consumer education. Its objectives are to (1) assist school administrators in the implementation of consumer education, and (2) assist secondary teachers in planning…

A general patterning approach by manipulating the evolution of two-dimensional liquid foams

NASA Astrophysics Data System (ADS)

Huang, Zhandong; Su, Meng; Yang, Qiang; Li, Zheng; Chen, Shuoran; Li, Yifan; Zhou, Xue; Li, Fengyu; Song, Yanlin

2017-01-01

The evolution of gas-liquid foams has been an attractive topic for more than half a century. However, it remains a challenge to manipulate the evolution of foams, which restricts the development of porous materials with excellent mechanical, thermal, catalytic, electrical or acoustic properties. Here we report a strategy to manipulate the evolution of two-dimensional (2D) liquid foams with a micropatterned surface. We demonstrate that 2D liquid foams can evolve beyond Ostwald ripening (large bubbles always consuming smaller ones). By varying the arrangement of pillars on the surface, we have prepared various patterns of foams in which the size, shape and position of the bubbles can be precisely controlled. Furthermore, these patterned bubbles can serve as a template for the assembly of functional materials, such as nanoparticles and conductive polymers, into desired 2D networks with nanoscale resolution. This methodology provides new insights in controlling curvature-driven evolution and opens a general route for the assembly of functional materials.

Japan's electronic packaging technologies

NASA Technical Reports Server (NTRS)

Tummala, Rao R.; Pecht, Michael

1995-01-01

The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

Theoretical and Experimental Study of Bacterial Colony Growth in 3D

NASA Astrophysics Data System (ADS)

Shao, Xinxian; Mugler, Andrew; Nemenman, Ilya

2014-03-01

Bacterial cells growing in liquid culture have been well studied and modeled. However, in nature, bacteria often grow as biofilms or colonies in physically structured habitats. A comprehensive model for population growth in such conditions has not yet been developed. Based on the well-established theory for bacterial growth in liquid culture, we develop a model for colony growth in 3D in which a homogeneous colony of cells locally consume a diffusing nutrient. We predict that colony growth is initially exponential, as in liquid culture, but quickly slows to sub-exponential after nutrient is locally depleted. This prediction is consistent with our experiments performed with E. coli in soft agar. Our model provides a baseline to which studies of complex growth process, such as such as spatially and phenotypically heterogeneous colonies, must be compared.

Capacity enhancement of indigenous expansion engine based helium liquefier

NASA Astrophysics Data System (ADS)

Doohan, R. S.; Kush, P. K.; Maheshwari, G.

2017-02-01

Development of technology and understanding for large capacity helium refrigeration and liquefaction at helium temperature is indispensable for coming-up projects. A new version of helium liquefier designed and built to provide approximately 35 liters of liquid helium per hour. The refrigeration capacity of this reciprocating type expansion engine machine has been increased from its predecessor version with continuous improvement and deficiency debugging. The helium liquefier has been built using components by local industries including cryogenic Aluminum plate fin heat exchangers. Two compressors with nearly identical capacity have been deployed for the operation of system. Together they consume about 110 kW of electric power. The system employs liquid Nitrogen precooling to enhance liquid Helium yield. This paper describes details of the cryogenic expander design improvements, reconfiguration of heat exchangers, performance simulation and their experimental validation.

Progress on coal-derived fuels for aviation systems

NASA Technical Reports Server (NTRS)

Witcofski, R. D.

1978-01-01

Synthetic aviation kerosene (Syn. Jet-A), liquid methane (LCH4), and liquid hydrogen (LH2) appear to be the most promising coal-derived fuels. Liquid hydrogen aircraft configurations, their fuel systems, and their ground requirements at the airport are identified. These aircraft appear viable, particularly for long haul use, where aircraft fueled with coal derived LH2 would consume 9 percent less coal resources than would aircraft fueled with coal derived Syn. Jet-A. Distribution of hydrogen from the point of manufacture to airports may pose problems. Synthetic JET-A would appear to cause fewer concerns to the air transportation industry. Of the three candidate fuels, LCH4 is the most energy efficient to produce, and an aircraft fueled with coal derived LCH4 may provide both the most efficient utilization of coal resources and the least expensive ticket as well.

Galvanic Liquid Applied Coating System for Protection of Embedded Steel Surfaces from Corrosion

NASA Technical Reports Server (NTRS)

Curran, Joseph; MacDowell, Louis; Voska, N. (Technical Monitor)

2002-01-01

The corrosion of reinforcing steel in concrete is an insidious problem for the Kennedy Space Center, government agencies, and the general public. Existing corrosion protection systems on the market are costly, complex, and time-consuming to install, require continuous maintenance and monitoring, and require specialized skills for installation. NASA's galvanic liquid-applied coating offers companies the ability to conveniently protect embedded steel rebar surfaces from corrosion. Liquid-applied inorganic galvanic coating contains one ore more of the following metallic particles: magnesium, zinc, or indium and may contain moisture attracting compounds that facilitate the protection process. The coating is applied to the outer surface of reinforced concrete so that electrical current is established between metallic particles and surfaces of embedded steel rebar; and electric (ionic) current is responsible for providing the necessary cathodic protection for embedded rebar surfaces.

Do region and gender influence hardwood product selection?

Treesearch

Delton Alderman

2013-01-01

Consumer preference is a fundamental focus of marketing research as it is used in developing marketing strategy and the positioning of products against competitors. This study evaluated consumer hardwood preferences of consumers from three United States geographical regions, which included six different metropolitan areas. Seven hardwood species and three laminate...

The Assertive Consumer: Credit and Warranties. Administrative Model.

ERIC Educational Resources Information Center

Clark, Barbara; Veraska, Wanda

This administrative model contains materials to be used in setting up a workshop designed to train members of action organizations (consumer, community, educational) in techniques such as role playing, modeling, and developing strong communications skills for assertively securing legal consumer rights in the areas of credits and warranties, and to…

Teaching Consumer Education. Delta Pi Epsilon Rapid Reader No. 2.

ERIC Educational Resources Information Center

Graf, David

This teaching guide provides secondary business teachers with ideas for teaching consumer education and assistance in strengthening the course content and methodology. Content is presented in four parts. Part 1 provides an overview of consumer education and covers the teacher, course objectives, content areas, and teaching-learning strategies…

Consumer Frauds and Deceptions: A Learning Module.

ERIC Educational Resources Information Center

Waddell, Fred E.; And Others

This manual is designed to assist helping professionals responsible for developing consumer education programs for older adults on the topic of consumer fraud and deception. In a modular presentation format, the materials address the following areas of concern: (1) types of frauds and deceptions such as money schemes, mail order fraud,…

The Assertive Consumer: Credit and Warranties. Student's Manual.

ERIC Educational Resources Information Center

Clark, Barbara; And Others

This student manual contains materials to be used in a workshop designed to train members of action organizations (consumer, community, educational) in techniques such as role playing, modeling, and developing strong communication skills for assertively securing legal consumer rights in the areas of credits and warranties and to prepare the…

A La Buena: Living Better. Bilingual Adult Proficiency Level Materials for Everyday Living.

ERIC Educational Resources Information Center

Smith, Philip D., Jr.; And Others

These bilingual English/Spanish Adult Proficiency Materials comprise three adult education courses in these areas: consumer education, health, and nutrition. Part 1, Consumer Education, covers these topics: money management, credit, frauds, consumer complaints, housing, utility bills, saving energy, banking, insurance (car, health, life), buying a…

The Great Tampon Scare of 1980: Helping the Consumer Cope.

ERIC Educational Resources Information Center

Frank, Andrea

1981-01-01

It is the health educator's responsibility to provide the consumer with information about toxic shock syndrome (TSS). An educational program should be developed which would encompass four areas: a description of TSS, an outline of theorized causes, a discussion of tampon health risks, and mechanisms for consumer action. (JN)

Quantitative Measurement of JWH-018 and JWH-073 Metabolites Excreted in Human Urine

PubMed Central

Moran, Cindy L.; Le, Vi-Huyen; Chimalakonda, Krishna C.; Smedley, Amy L.; Lackey, Felisia D.; Owen, Suzanne N.; Kennedy, Paul D.; Endres, Gregory W.; Ciske, Fred L.; Kramer, James B.; Kornilov, Andrei M.; Bratton, L. D.; Dobrowolski, Paul J.; Wessinger, William D.; Fantegrossi, William E.; Prather, Paul P.; James, Laura P.; Radominska-Pandya, Anna; Moran, Jeffery H.

2011-01-01

'K2/SPICE' products are commonly laced with aminoalkylindole synthetic cannabinoids (i.e., JWH-018 and JWH-073) and are touted as ‘legal’ marijuana substitutes. Here we validate a liquid chromatography tandem mass spectrometry (LC-MS/MS) methsod for measuring urinary concentrations of JWH-018, JWH-073, and several potential metabolites of each. The analytical procedure has high capacity for sample throughput and does not require solid phase or liquid extraction. Evaluation of human urine specimens collected after the subjects reportedly administered JWH-018 or a mixture of JWH-018 and JWH-073 provides preliminary evidence of clinical utility. Two subjects that consumed JWH-018 primarily excreted glucuronidated conjugates of 5-(3-(1-naphthoyl)-1H-indol-1-yl)-pentanoic acid (> 50 ng/ml) and (1-(5-hydroxypentyl)- 1H -indol-3-yl)(naphthalene-1-yl)-methanone (> 30 ng/ml). Interestingly, oxidized metabolites of both JWH-018 and JWH-073 were detected in these specimens, suggesting either metabolic demethylation of JWH-018 to JWH-073 or a non-reported, previous JWH-073 exposure. Metabolic profiles generated from a subject who consumed a mixture of JWH-018 and JWH-073 were similar to profiles generated from subjects who presumably consumed JWH-018 exclusively. Oxidized metabolites of JWH-018 and JWH-073 were of the same pattern, but JWH-018 metabolites were excreted at lower concentrations. These results begin clinically validating the LC-MS/MS assay for detecting and quantifying aminoalkylindole metabolites. Full validation awaits further testing. PMID:21506519

In Situ Environmental TEM in Imaging Gas and Liquid Phase Chemical Reactions for Materials Research.

PubMed

Wu, Jianbo; Shan, Hao; Chen, Wenlong; Gu, Xin; Tao, Peng; Song, Chengyi; Shang, Wen; Deng, Tao

2016-11-01

Gas and liquid phase chemical reactions cover a broad range of research areas in materials science and engineering, including the synthesis of nanomaterials and application of nanomaterials, for example, in the areas of sensing, energy storage and conversion, catalysis, and bio-related applications. Environmental transmission electron microscopy (ETEM) provides a unique opportunity for monitoring gas and liquid phase reactions because it enables the observation of those reactions at the ultra-high spatial resolution, which is not achievable through other techniques. Here, the fundamental science and technology developments of gas and liquid phase TEM that facilitate the mechanistic study of the gas and liquid phase chemical reactions are discussed. Combined with other characterization tools integrated in TEM, unprecedented material behaviors and reaction mechanisms are observed through the use of the in situ gas and liquid phase TEM. These observations and also the recent applications in this emerging area are described. The current challenges in the imaging process are also discussed, including the imaging speed, imaging resolution, and data management. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Four-dimensional Printing of Liquid Crystal Elastomers.

PubMed

Ambulo, Cedric P; Burroughs, Julia J; Boothby, Jennifer M; Kim, Hyun; Shankar, M Ravi; Ware, Taylor H

2017-10-25

Three-dimensional structures capable of reversible changes in shape, i.e., four-dimensional-printed structures, may enable new generations of soft robotics, implantable medical devices, and consumer products. Here, thermally responsive liquid crystal elastomers (LCEs) are direct-write printed into 3D structures with a controlled molecular order. Molecular order is locally programmed by controlling the print path used to build the 3D object, and this order controls the stimulus response. Each aligned LCE filament undergoes 40% reversible contraction along the print direction on heating. By printing objects with controlled geometry and stimulus response, magnified shape transformations, for example, volumetric contractions or rapid, repetitive snap-through transitions, are realized.

Can Self-Control Explain Avoiding Free Money? Evidence from Interest-Free Student Loans.

PubMed

Cadena, Brian C; Keys, Benjamin J

2013-10-01

This paper uses insights from behavioral economics to explain a particularly surprising borrowing phenomenon: One in six undergraduate students offered interest-free loans turn them down. Models of impulse control predict that students may optimally reject subsidized loans to avoid excessive consumption during school. Using the National Postsecondary Student Aid Study (NPSAS), we investigate students' take-up decisions and identify a group of students for whom the loans create an especially tempting liquidity increase. Students who would receive the loan in cash are significantly more likely to turn it down, suggesting that consumers choose to limit their liquidity in economically meaningful situations.

Micro-Loans, Insecticide-Treated Bednets, and Malaria: Evidence from a Randomized Controlled Trial in Orissa, India.

PubMed

Tarozzi, Alessandro; Mahajan, Aprajit; Blackburn, Brian; Kopf, Dan; Krishnan, Lakshmi; Yoong, Joanne

2014-07-01

We describe findings from the first large-scale cluster randomized controlled trial in a developing country that evaluates the uptake of a health-protecting technology, insecticide-treated bednets (ITNs), through micro-consumer loans, as compared to free distribution and control conditions. Despite a relatively high price, 52 percent of sample households purchased ITNs, highlighting the role of liquidity constraints in explaining earlier low adoption rates. We find mixed evidence of improvements in malaria indices. We interpret the results and their implications within the debate about cost sharing, sustainability and liquidity constraints in public health initiatives in developing countries.

Can Self-Control Explain Avoiding Free Money? Evidence from Interest-Free Student Loans*

PubMed Central

Cadena, Brian C.; Keys, Benjamin J.

2014-01-01

This paper uses insights from behavioral economics to explain a particularly surprising borrowing phenomenon: One in six undergraduate students offered interest-free loans turn them down. Models of impulse control predict that students may optimally reject subsidized loans to avoid excessive consumption during school. Using the National Postsecondary Student Aid Study (NPSAS), we investigate students’ take-up decisions and identify a group of students for whom the loans create an especially tempting liquidity increase. Students who would receive the loan in cash are significantly more likely to turn it down, suggesting that consumers choose to limit their liquidity in economically meaningful situations. PMID:24839312

Postprandial glycemic response to orange juice and nondiet cola: is there a difference?

PubMed

Sullivan, M J; Scott, R L

1991-01-01

The purpose of this study was to compare the effects of unsweetened fruit juice and regular, decaffeinated soda on postprandial serum glucose levels in individuals with non-insulin-dependent diabetes mellitus (NIDDM) when these liquids are ingested separately as part of mixed meals. Eighteen individuals with NIDDM consumed three test breakfasts calculated using the diabetic exchange meal-planning system. Foods were identical in each of the breakfasts except for foods in the fruit exchange. Carbohydrate-equivalent amounts of fresh orange slices, unsweetened orange juice, and regular, decaffeinated Coke were consumed in breakfasts 1, 2, and 3, respectively. Serum glucose samples were drawn at fasting and 1, 2, and 3 hours postprandially. No difference was found in the postprandial serum glucose response when Coke versus orange juice was consumed in the breakfast. These findings question the appropriateness of using unsweetened fruit juices in routine meal planning for individuals with NIDDM.

IN² Program Validates Data Center Cooling Solution | News | NREL

Science.gov Websites

IN2 Program Validates Data Center Cooling Solution February 21, 2018 IN2 Program Validates Data Center Cooling Solution NREL researchers and LiquidCool Solutions representatives stand along-side centers on average consuming an estimated 70 billion kWh per year, a disruptive energy-saving solution is

Optimizing an Experimental System for Assessing the Amounts and Forms of Copper Released into Aquatic Systems from Commercially Available Liquid and Micronized Pressure Treated Lumber

EPA Science Inventory

The fate and effects of pristine engineered metal nanomaterials (ENMs) in simplified systems have been widely studied; however, little is known about the potential release and impact of metal ENMs from consumer goods, especially lumber which has been treated with micronized coppe...

Effects of Industrial Cashew Nut Processing on Anacardic Acid Content and Allergen Recognition by IgE

USDA-ARS?s Scientific Manuscript database

Cashew nuts are consumed worldwide and are in high demand, but they can also cause food allergy in some individuals. The present study aimed to assess the effect(s) of industrial processing on anacardic acids and allergens present in cashew nuts. Sample analyses were performed using liquid chromat...

Two cases of contact dermatitis resulting from use of body wash as a skin moisturizer.

PubMed

Miller, Michael A; Borys, Doug; Riggins, Michele; Masneri, David C; Levsky, Marc E

2008-02-01

The use of liquid skin cleanser or body wash has become common in the United States. We report 2 cases of contact dermatitis secondary to the application of Dove Body Wash (Unilever US, Inc., Englewood Cliffs, NJ) with the consumer misconception that the product was a skin moisturizing cream.

Determination of humic and fulvic acids in commercial solid and liquid humic products by alkaline extraction and gravimetric determination

USDA-ARS?s Scientific Manuscript database

Increased use of humic substances in agriculture has generated intense interest among producers, consumers, and regulators for an accurate and reliable method for quantification of humic (HA) and fulvic acids (FA) in raw ores and products. Here we present a thoroughly validated method, the Humic Pro...

The effect of changing the contact surface area between pleural liquid and pleura on the turnover of pleural liquid.

PubMed

Nakamura, T; Hara, H; Ijima, F; Arai, T; Kira, S

1984-03-01

To study the dynamics of pleural liquid, 250 ml of saline labeled with markers were injected into the pleural cavity of anesthetized dogs. For 3 h, liquid volume and concentration of these markers were measured. In a control group of dogs, the turnover rate of pleural liquid was 19.6 +/- 5.6 ml/min and lymphatic flow was 0.58 +/- 0.07 ml/min. In a group of pneumonectomized dogs, the turnover rate and lymphatic flow fell to about one fourth of those in the control group. When the left pulmonary artery was occluded, the turnover rate was halved, but lymphatic flow was not significantly different from that in the control group. These results suggest that the turnover rate of pleural liquid is dependent on the area of contact between pleural liquid and pleura and on the blood flow of the pleura. In addition, it appears that changes in pleural liquid volume are dependent on lymphatic flow.

An exploratory investigation of the landscape-lake interface: Land cover controls over consumer N and C isotopic composition in Lake Michigan rivermouths

USGS Publications Warehouse

Larson, James H.; Richardson, William B.; Vallazza, Jonathan M.; Nelson, J. C.

2012-01-01

Rivermouth ecosystems are areas where tributary waters mix with lentic near-shore waters and provide habitat for many Laurentian Great Lakes fish and wildlife species. Rivermouths are the interface between terrestrial activities that influence rivers and the ecologically important nearshore. Stable isotopes of nitrogen (N) and carbon (C) in consumers were measured from a range of rivermouths systems to address two questions: 1) What is the effect of rivermouth ecosystems and land cover on the isotopic composition of N available to rivermouth consumers? 2) Are rivermouth consumers composed of lake-like or river-like C? For question 1, data suggest that strong relationships between watershed agriculture and consumer N are weakened or eliminated at the rivermouth, in favor of stronger relationships between consumer N and depositional areas that may favor denitrification. For question 2, despite apparently large riverine inputs, consumers only occasionally appear river-like. More often consumers seem to incorporate large amounts of C from either the nearshore or primary production within the rivermouth itself. Rivermouths appear to be active C and N processing environments, thus necessitating their explicit incorporation into models estimating nearshore loading and possibly contributing to their importance to Great Lakes biota.

Patulin and secondary metabolite production by marine-derived Penicillium strains.

PubMed

Vansteelandt, Marieke; Kerzaon, Isabelle; Blanchet, Elodie; Fossi Tankoua, Olivia; Robiou Du Pont, Thibaut; Joubert, Yolaine; Monteau, Fabrice; Le Bizec, Bruno; Frisvad, Jens C; Pouchus, Yves François; Grovel, Olivier

2012-09-01

Genus Penicillium represents an important fungal group regarding to its mycotoxin production. Secondary metabolomes of eight marine-derived strains belonging to subgenera Furcatum and Penicillium were investigated using dereplication by liquid chromatography (LC)-Diode Array Detector (DAD)-mass spectrometry (MS)/MS. Each strain was grown on six different culture media to enhance the number of observable metabolites. Thirty-two secondary metabolites were detected in crude extracts with twenty first observations for studied species. Patulin, a major mycotoxin, was classically detected in extracts of Penicillium expansum, and was also isolated from Penicillium antarcticum cultures, whose secondary metabolome is still to be done. These detections constituted the first descriptions of patulin in marine strains of Penicillium, highlighting the risk for shellfish and their consumers due to the presence of these fungi in shellfish farming areas. Patulin induced acute neurotoxicity on Diptera larvae, indicating the interest of this bioassay as an additional tool for detection of this major mycotoxin in crude extracts. Copyright © 2012 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

User and carer involvement in the training and education of health professionals: a review of the literature.

PubMed

Repper, Julie; Breeze, Jayne

2007-03-01

Health policy requires consumer involvement in services, research and education but little is known about how consumers are being involved in healthcare education, the effect on learning and practice, nor how involvement initiatives are being evaluated. To describe methods of involving consumers in healthcare education, discuss ways in which initiatives have been evaluated, and identify areas for development in education, practice and research. All papers reporting specific initiatives involving consumers in health care worker training and education were included. Viewpoint articles and studies of consumers training consumers were excluded. Cinahl, Medline, Assia, PsycINFO, British Nursing Index, Social Science Citation Index, citations from reference lists, relevant websites and personal communication with key people known to be working in this area. A narrative approach was taken with categorisation of data to reflect objectives of selected studies; method of involvement; process issues and evaluation. Thirty-eight papers were included; most provide small-scale qualitative studies of mental health service users and focus on process rather than outcome. Various methods of involvement are described and consumers consistently prioritise the need for training in interpersonal skills over 'technical' skills. There is little research into organisational strategies and no studies investigate the effect of consumer involvement on practice. Two studies indicated that students exposed to consumer involvement demonstrate more empathic understanding and better communication skills. There is tentative evidence that consumer involvement in training enhances workers' skills in the manner prioritised by consumers. However, if consumer involvement in training and education is to facilitate services that reflect the priorities of the people using them, it must be developed in partnership with service providers; further research is needed to explore the impact of consumer involvement and to track the development of organisational consumer involvement strategies, also systems for supporting consumers need to be established, including training for both consumers and staff.

Study of role of meniscus and viscous forces during liquid-mediated contacts separation

NASA Astrophysics Data System (ADS)

Dhital, Prabin

Menisci may form between two solid surfaces with the presence of an ultra-thin liquid film. When the separation operation is needed, meniscus and viscous forces contribute to an adhesion leading stiction, high friction, possibly high wear and potential failure of the contact systems, for instance microdevices, magnetic head disks and diesel fuel injectors. The situation may become more pronounced when the contacting surfaces are ultra-smooth and the normal load is small. Various design parameters, such as contact angle, initial separation height, surface tension and liquid viscosity, have been investigated during liquid-mediated contact separation. However, how the involved forces will change roles for various liquid is of interest and is necessary to be studied. In this study, meniscus and viscous forces due to water and liquid lubricants during separation of two flat surfaces are studied. Previously established mathematical model for meniscus and viscous forces during flat on flat contact separation is simulated. The effect of meniscus and viscous force on critical meniscus area at which those forces change role is studied with different liquid properties for flat on flat contact surfaces. The roles of the involved forces at various meniscus areas are analyzed. Experiments are done in concerns to studying the effect of surface roughness on contact angle. The impact of liquid properties, initial separation heights and contact angle on critical meniscus area for different liquid properties are analyzed. The study provides a fundamental understanding of the forces of the separation process and its value for the design of interfaces. The effect of surface roughness and liquid properties on contact angle are studied.

The evolution of droplet impacting on thin liquid film at superhydrophilic surface

NASA Astrophysics Data System (ADS)

Li, Yun; Zheng, Yi; Lan, Zhong; Xu, Wei; Ma, Xuehu

2017-12-01

Thin films are ubiquitous in nature, and the evolution of a liquid film after droplet impact is critical in many industrial processes. In this paper, a series of experiments and numerical simulations are conducted to investigate the distribution and evolution features of local temperature as the droplet impacts a thin film on the superhydrophilic surface by the thermal tracing method. A cold area is formed in the center after droplet impacts on heated solid surfaces. For the droplet impact on thin heated liquid film, a ring-shaped low temperature zone is observed in this experiment. Meanwhile, numerical simulation is adopted to analyze the mechanism and the interaction between the droplet and the liquid film. It is found that due to the vortex velocity distribution formed inside the liquid film after the impact, a large part of the droplet has congested. The heating process is not obvious in the congested area, which leads to the formation of a low-temperature area in the results.

Wheeling & Dealing: A Guide for Handicapped Consumers.

ERIC Educational Resources Information Center

Nemeth, Cheryl

The resource guide is intended to aid disabled persons develop independence by presenting consumer information on all areas of the United States. A preface explains the need for consumer education by the disabled and the introduction describes the guide's purpose and format. Each subject is introduced with a 4-question self quiz and an explanation…

Seniors: Current Events and Consumer Awareness. Final Report.

ERIC Educational Resources Information Center

Molek, Carol

A project was conducted to design and implement a curriculum for older adults in the areas of consumer events and consumer awareness. The project aimed to improve the seniors' basic skills by providing relevant content in a basic education context. During the project a curriculum was developed and presented through workshops held in 2 senior…

Liquid sodium dip seal maintenance system

DOEpatents

Briggs, Richard L.; Meacham, Sterling A.

1980-01-01

A system for spraying liquid sodium onto impurities associated with liquid dip seals of nuclear reactors. The liquid sodium mixing with the impurities dissolves the impurities in the liquid sodium. The liquid sodium having dissolved and diluted the impurities carries the impurities away from the site thereby cleaning the liquid dip seal and surrounding area. The system also allows wetting of the metallic surfaces of the dip seal thereby reducing migration of radioactive particles across the wetted boundary.

Fast Conversion of Ionic Liquids and Poly(Ionic Liquid)s into Porous Nitrogen-Doped Carbons in Air

PubMed Central

Men, Yongjun; Ambrogi, Martina; Han, Baohang; Yuan, Jiayin

2016-01-01

Ionic liquids and poly(ionic liquid)s have been successfully converted into nitrogen-doped porous carbons with tunable surface area up to 1200 m2/g at high temperatures in air. Compared to conventional carbonization process conducted under inert gas to produce nitrogen-doped carbons, the new production method was completed in a rather shorter time without noble gas protection. PMID:27070588

Fast Conversion of Ionic Liquids and Poly(Ionic Liquid)s into Porous Nitrogen-Doped Carbons in Air.

PubMed

Men, Yongjun; Ambrogi, Martina; Han, Baohang; Yuan, Jiayin

2016-04-08

Ionic liquids and poly(ionic liquid)s have been successfully converted into nitrogen-doped porous carbons with tunable surface area up to 1200 m²/g at high temperatures in air. Compared to conventional carbonization process conducted under inert gas to produce nitrogen-doped carbons, the new production method was completed in a rather shorter time without noble gas protection.

Detection and quantitative determination of heavy metals in electronic cigarette refill liquids using Total Reflection X-ray Fluorescence Spectrometry.

PubMed

Kamilari, Eleni; Farsalinos, Konstantinos; Poulas, Konstantinos; Kontoyannis, Christos G; Orkoula, Malvina G

2018-06-01

Electronic cigarettes are considered healthier alternatives to conventional cigarettes containing tobacco. They produce vapor through heating of the refill liquids (e-liquids) which consist of propylene glycol, vegetable glycerin, nicotine (in various concentrations), water and flavoring agents. Heavy metals may enter the refill liquid during the production, posing a risk for consumer's health due to their toxicity. The objective of the present study was the development of a methodology for the detection and quantitative analysis of cadmium (Cd), lead (Pb), nickel (Ni), copper (Cu), arsenic (As) and chromium (Cr), employing Total Reflection X-Ray Fluorescence Spectroscopy (TXRF) as an alternative technique to ICP-MS or ICP-OES commonly used for this type of analysis. TXRF was chosen due to its advantages, which include short analysis time, promptness, simultaneous multi-element analysis capability and minimum sample preparation, low purchase and operational cost. The proposed methodology was applied to a large number of electronic cigarette liquids commercially available, as well as their constituents, in order to evaluate their safety. TXRF may be a valuable tool for probing heavy metals in electronic cigarette refill liquids to serve for the protection of human health. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effect of Hydrogenated, Liquid and Ghee Oils on Serum Lipids Profile

PubMed Central

Mohammadifard, Noushin; Nazem, Masoud; Naderi, Gholam-Ali; Saghafian, Faezeh; Sajjadi, Firoozeh; Maghroon, Maryam; Bahonar, Ahmad; Alikhasi, Hasan; Nouri, Fatemeh

2010-01-01

BACKGROUND Trans fatty acids are known as the most harmful type of dietary fats, so this study was done to compare the effects of hydrogenated, liquid and ghee oils on serum lipids profile of healthy adults. METHODS This study was a randomized clinical trial conducted on 129 healthy participants aged from 20 to 60 years old who were beneficiaries of Imam-e-Zaman charitable organization. Subjects were randomly divided into 3 groups and each group was treated with a diet containing cooking and frying liquid, ghee, or hydrogenated for 40 days. Fasting serum lipids, including total cholesterol (TC), triglyceride (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), apoprotein A (Apo A), and apoprotein B (Apo B) were measured before and after the study. RESULTS TC, TG and Apo B had a significant reduction in the liquid oil group compared to the hydrogenated oil group. In the ghee group TG declined and Apo A increased significantly (P < 0.01). Liquid oil group had a significant reduction in HDL-C, compared to the ghee oil group (P < 0.05). CONCLUSION It was concluded that consuming liquid oil along with frying oil caused to reduce all serum lipid levels. However, ghee oil only reduced TG and increased HDL-C levels. PMID:22577408

Simultaneous determination of six synthetic phenolic antioxidants in edible oils using dispersive liquid-liquid microextraction followed by high-performance liquid chromatography with diode array detection.

PubMed

Xu, Shuangjiao; Liu, Liangliang; Wang, Yanqin; Zhou, Dayun; Kuang, Meng; Fang, Dan; Yang, Weihua; Wei, Shoujun; Xiao, Aiping; Ma, Lei

2016-08-01

A simple, rapid, organic-solvent- and sample-saving pretreatment technique, called dispersive liquid-liquid microextraction, was developed for the determination of six synthetic phenolic antioxidants from edible oils before high-performance liquid chromatography with diode array detection. The entire procedure was composed of a two-step microextraction and a centrifugal process and could be finished in about 5 min, only consuming only 25 mg of sample and 1 mL of the organic solvent for each extraction. The influences of several important parameters on the microextraction efficiency were thoroughly investigated. Recovery assays for oil samples were spiked at three concentration levels, 50, 100 and 200 mg/kg, and provided recoveries in the 86.3-102.5% range with a relative standard deviation below 3.5%. The intra-day and inter-day precisions for the analysis were less than 3.8%. The proposed method was successfully applied for the determination of synthetic phenolic antioxidants in different oil samples, and satisfactory results were obtained. Thus, the developed method represents a viable alternative for the quality control of synthetic phenolic antioxidant concentrations in edible oils. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The particle size distribution, density, and specific surface area of welding fumes from SMAW and GMAW mild and stainless steel consumables.

PubMed

Hewett, P

1995-02-01

Particle size distributions were measured for fumes from mild steel (MS) and stainless steel (SS); shielded metal arc welding (SMAW) and gas metal arc welding (GMAW) consumables. Up to six samples of each type of fume were collected in a test chamber using a micro-orifice uniform deposit (cascade) impactor. Bulk samples were collected for bulk fume density and specific surface area analysis. Additional impactor samples were collected using polycarbonate substrates and analyzed for elemental content. The parameters of the underlying mass distributions were estimated using a nonlinear least squares analysis method that fits a smooth curve to the mass fraction distribution histograms of all samples for each type of fume. The mass distributions for all four consumables were unimodal and well described by a lognormal distribution; with the exception of the GMAW-MS and GMAW-SS comparison, they were statistically different. The estimated mass distribution geometric means for the SMAW-MS and SMAW-SS consumables were 0.59 and 0.46 micron aerodynamic equivalent diameter (AED), respectively, and 0.25 micron AED for both the GMAW-MS and GMAW-SS consumables. The bulk fume densities and specific surface areas were similar for the SMAW-MS and SMAW-SS consumables and for the GMAW-MS and GMAW-SS consumables, but differed between SMAW and GMAW. The distribution of metals was similar to the mass distributions. Particle size distributions and physical properties of the fumes were considerably different when categorized by welding method. Within each welding method there was little difference between MS and SS fumes.

Utilization of community pharmacy space to enhance privacy: a qualitative study.

PubMed

Hattingh, H Laetitia; Emmerton, Lynne; Ng Cheong Tin, Pascale; Green, Catherine

2016-10-01

Community pharmacists require access to consumers' information about their medicines and health-related conditions to make informed decisions regarding treatment options. Open communication between consumers and pharmacists is ideal although consumers are only likely to disclose relevant information if they feel that their privacy requirements are being acknowledged and adhered to. This study sets out to explore community pharmacy privacy practices, experiences and expectations and the utilization of available space to achieve privacy. Qualitative methods were used, comprising a series of face-to-face interviews with 25 pharmacists and 55 pharmacy customers in Perth, Western Australia, between June and August 2013. The use of private consultation areas for certain services and sensitive discussions was supported by pharmacists and consumers although there was recognition that workflow processes in some pharmacies may need to change to maximize the use of private areas. Pharmacy staff adopted various strategies to overcome privacy obstacles such as taking consumers to a quieter part of the pharmacy, avoiding exposure of sensitive items through packaging, lowering of voices, interacting during pharmacy quiet times and telephoning consumers. Pharmacy staff and consumers regularly had to apply judgement to achieve the required level of privacy. Management of privacy can be challenging in the community pharmacy environment, and on-going work in this area is important. As community pharmacy practice is increasingly becoming more involved in advanced medication and disease state management services with unique privacy requirements, pharmacies' layouts and systems to address privacy challenges require a proactive approach. © 2015 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

A smartphone controlled handheld microfluidic liquid handling system.

PubMed

Li, Baichen; Li, Lin; Guan, Allan; Dong, Quan; Ruan, Kangcheng; Hu, Ronggui; Li, Zhenyu

2014-10-21

Microfluidics and lab-on-a-chip technologies have made it possible to manipulate small volume liquids with unprecedented resolution, automation and integration. However, most current microfluidic systems still rely on bulky off-chip infrastructures such as compressed pressure sources, syringe pumps and computers to achieve complex liquid manipulation functions. Here, we present a handheld automated microfluidic liquid handling system controlled by a smartphone, which is enabled by combining elastomeric on-chip valves and a compact pneumatic system. As a demonstration, we show that the system can automatically perform all the liquid handling steps of a bead-based HIV1 p24 sandwich immunoassay on a multi-layer PDMS chip without any human intervention. The footprint of the system is 6 × 10.5 × 16.5 cm, and the total weight is 829 g including battery. Powered by a 12.8 V 1500 mAh Li battery, the system consumed 2.2 W on average during the immunoassay and lasted for 8.7 h. This handheld microfluidic liquid handling platform is generally applicable to many biochemical and cell-based assays requiring complex liquid manipulation and sample preparation steps such as FISH, PCR, flow cytometry and nucleic acid sequencing. In particular, the integration of this technology with read-out biosensors may help enable the realization of the long-sought Tricorder-like handheld in vitro diagnostic (IVD) systems.

Caffeine and Creatine Content of Dietary Supplements Consumed by Brazilian Soccer Players.

PubMed

Inácio, Suelen Galante; de Oliveira, Gustavo Vieira; Alvares, Thiago Silveira

2016-08-01

Caffeine and creatine are ingredients in the most popular dietary supplements consumed by soccer players. However, some products may not contain the disclosed amounts of the ingredients listed on the label, compromising the safe usage and the effectiveness of these supplements. Therefore, the aim of this study was to evaluate the content of caffeine and creatine in dietary supplements consumed by Brazilian soccer players. The results obtained were compared with the caffeine content listed on the product label. Two batches of the supplement brands consumed by ≥ 50% of the players were considered for analysis. The quantification of caffeine and creatine in the supplements was determined by a high-performance liquid chromatography system with UV detector. Nine supplements of caffeine and 7 supplements of creatine met the inclusion criteria for analysis. Eight brands of caffeine and five brands of creatine showed significantly different values (p < .05) as compared with the values stated on the label. There were no significant differences between the two batches of supplements analyzed, except for one caffeine supplement. It can be concluded that caffeine and creatine dietary supplements consumed by Brazilian soccer players present inaccurate values listed on the label, although most presented no difference among batches. To ensure consumer safety and product efficacy, accurate information on caffeine and creatine content should be provided on all dietary supplement labels.

30 CFR 56.4130 - Electric substations and liquid storage facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Unburied, flammable or combustible liquid storage tanks. (3) Any group of containers used for storage of more than 60 gallons of flammable or combustible liquids. (b) The area within the 25-foot perimeter... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electric substations and liquid storage...

30 CFR 56.4130 - Electric substations and liquid storage facilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Unburied, flammable or combustible liquid storage tanks. (3) Any group of containers used for storage of more than 60 gallons of flammable or combustible liquids. (b) The area within the 25-foot perimeter... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electric substations and liquid storage...

30 CFR 56.4130 - Electric substations and liquid storage facilities.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Unburied, flammable or combustible liquid storage tanks. (3) Any group of containers used for storage of more than 60 gallons of flammable or combustible liquids. (b) The area within the 25-foot perimeter... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electric substations and liquid storage...

30 CFR 56.4130 - Electric substations and liquid storage facilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Unburied, flammable or combustible liquid storage tanks. (3) Any group of containers used for storage of more than 60 gallons of flammable or combustible liquids. (b) The area within the 25-foot perimeter... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electric substations and liquid storage...

Liquid lubrication for space applications

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.; Khonsari, Michael M.

1992-01-01

Reviewed here is the state of the art of liquid lubrication for space applications. The areas discussed are types of liquid lubrication mechanisms, space environmental effects on lubrication, classification of lubricants, liquid lubricant additives, grease lubrication, mechanism materials, bearing anomalies and failures, lubricant supply techniques, and application types and lubricant needs for those applications.

Liquid lubrication for space applications

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.; Khonsari, Michael M.

1993-01-01

Reviewed here is the state of the art of liquid lubrication for space applications. The areas discussed are types of liquid lubrication mechanisms, space environmental effects on lubrication, classification of lubricants, liquid lubricant additives, grease lubrication, mechanism materials, bearing anomalies and failures, lubricant supply techniques, and application types and lubricant needs for those applications.

What do consumer surveys and experiments reveal and conceal about consumer preferences for genetically modified foods?

PubMed

Colson, Gregory; Rousu, Matthew C

2013-01-01

Assessing consumer perceptions and willingness to pay for genetically modified (GM) foods has been one of the most active areas of empirical research in agricultural economics. Researchers over the past 15 years have delivered well over 100 estimates of consumers' willingness to pay for GM foods using surveys and experimental methods. In this review, we explore a number of unresolved issues related to three questions that are critical when considering the sum of the individual contributions that constitute the evidence on consumer preferences for GM foods.

Consumers' use of the internet for health information.

PubMed

Yom, Young-Hee; Yee, Jung Ae

2006-01-01

Although health information is one of the most frequently sought subjects on the Internet, little research has been performed in this area. This study was designed to examine the use of the Internet for health information by the consumers. A questionnaire was administered to a sample of 212 consumers who were using health care. Only small percentages of the consumers accessed the Internet for health information. This result indicates that different marketing strategies based on geographic characteristics should be developed for consumers who wish to get health care information.

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

PubMed Central

Zhang, Hui; Gao, Shecheng; Luo, Yunhan; Xiong, Songsong; Wan, Lei; Huang, Xincheng; Huang, Bingsen; Feng, Yuanhua; He, Miao; Liu, Weiping; Chen, Zhe; Li, Zhaohui

2018-01-01

A liquid-filled D-shaped fiber (DF) cavity serving as an in-fiber Mach–Zehnder interferometer (MZI) has been proposed and experimentally demonstrated for temperature sensing with ultrahigh sensitivity. The miniature MZI is constructed by splicing a segment of DF between two single-mode fibers (SMFs) to form a microcavity (MC) for filling and replacement of various refractive index (RI) liquids. By adjusting the effective RI difference between the DF and MC (the two interference arms), experimental and calculated results indicate that the interference spectra show different degrees of temperature dependence. As the effective RI of the liquid-filled MC approaches that of the DF, temperature sensitivity up to −84.72 nm/°C with a linear correlation coefficient of 0.9953 has been experimentally achieved for a device with the MC length of 456 μm, filled with liquid RI of 1.482. Apart from ultrahigh sensitivity, the proposed MCMZI device possesses additional advantages of its miniature size and simple configuration; these features make it promising and competitive in various temperature sensing applications, such as consumer electronics, biological treatments, and medical diagnosis. PMID:29673220

A physical retrieval of cloud liquid water over the global oceans using special sensor microwave/imager (SSM/I) observations

NASA Astrophysics Data System (ADS)

Greenwald, Thomas J.; Stephens, Graeme L.; Vonder Haar, Thomas H.; Jackson, Darren L.

1993-10-01

A method of remotely sensing integrated cloud liquid water over the oceans using spaceborne passive measurements from the special sensor microwave/imager (SSM/I) is described. The technique is comprised of a simple physical model that uses the 19.35- and 37-GHz channels of the SSM/I. The most comprehensive validation to date of cloud liquid water estimated from satellites is presented. This is accomplished through a comparison to independent ground-based microwave radiometer measurements of liquid water on San Nicolas Island, over the North Sea, and on Kwajalein and Saipan Islands in the western Pacific. In areas of marine stratocumulus clouds off the coast of California a further comparison is made to liquid water inferred from advanced very high resolution radiometer (AVHRR) visible reflectance measurements. The results are also compared qualitatively with near-coincident satellite imagery and with other existing microwave methods in selected regions. These comparisons indicate that the liquid water amounts derived from the simple scheme are consistent with the ground-based measurements for nonprecipitating cloud systems in the subtropics and middle to high latitudes. The comparison in the tropics, however, was less conclusive. Nevertheless, the retrieval method appears to have general applicability over most areas of the global oceans. An observational measure of the minimum uncertainty in the retrievals is determined in a limited number of known cloud-free areas, where the liquid water amounts are found to have a low variability of 0.016 kg m-2. A simple sensitivity and error analysis suggests that the liquid water estimates have a theoretical relative error typically ranging from about 25% to near 40% depending on the atmospheric/surface conditions and on the amount of liquid water present in the cloud. For the global oceans as a whole the average cloud liquid water is determined to be about 0.08 kg m-2. The major conclusion of this paper is that reasonably accurate amounts of cloud liquid water can be retrieved from SSM/I observations for nonprecipitating cloud systems, particularly in areas of persistent stratocumulus clouds, with less accurate retrievals in tropical regions.

Effects of the 'Consumer Game' on Learning and Attitudes of Selected Seventh Grade Students in A Target-Area School.

ERIC Educational Resources Information Center

Cohen, Karen C.

The following report describes one teacher's use of the Consumer Game in a class of seventh grade students in a target area school. These students were not highly motivated and displayed poor attitudes toward school, and it was hoped that a game experience might interest them. Despite unusual administrative conditions, the game appears to have…

Human Body Burden and Dietary Methylmercury Intake: The Relationship in a Rice-Consuming Population.

PubMed

Li, Ping; Feng, Xinbin; Chan, Hing-Man; Zhang, Xiaofeng; Du, Buyun

2015-08-18

Rice can be the main route of methylmercury (MeHg) exposure for rice-consuming populations living in area where mercury (Hg) is mined. However, the current risk assessment paradigm for MeHg exposure is based on epidemiological data collected from fish-consuming populations. This study was designed to evaluate the relationship between dietary MeHg intake and human body burden in a rice -consuming population from the Wanshan Hg mining area in China. Hair MeHg concentrations averaged 2.07 ± 1.79 μg/g, and the average blood MeHg concentration across the study area ranged from 2.20 to 9.36 μg/L. MeHg constituted 52.8 ± 17.5% and 71.7 ± 18.2% of total Hg (THg) on average in blood and hair samples, respectively. Blood and hair MeHg concentrations, rather than THg, can be used as a proxy of human MeHg exposure. Hair MeHg levels showed no significant monthly variation; however, hair THg can be impacted by inorganic Hg exposure. The toxicokinetic model of MeHg exposure based on fish consumption underestimated the human hair MeHg levels, and this may be a consequence of the high hair-to-blood MeHg ratio (361 ± 105) in the studied rice-consuming population. The use of risk assessment models based on fish consumption may not be appropriate for inland mining areas where rice is the staple food.

Experimental partitioning of rare earth elements and scandium among armalcolite, ilmenite, olivine and mare basalt liquid

NASA Technical Reports Server (NTRS)

Irving, A. J.; Merrill, R. B.; Singleton, D. E.

1978-01-01

An experimental study was carried out to measure partition coefficients for two rare-earth elements (Sm and Tm) and Sc among armalcolite, ilmenite, olivine and liquid coexisting in a system modeled on high-Ti mare basalt 74275. This 'primitive' sample was chosen for study because its major and trace element chemistry as well as its equilibrium phase relations at atmospheric pressure are known from previous studies. Beta-track analytical techniques were used so that partition coefficients could be measured in an environment whose bulk trace element composition is similar to that of the natural basalt. Partition coefficients for Cr and Mn were determined in the same experiments by microprobe analysis. The only equilibrium partial melting model appears to be one in which ilmenite is initially present in the source region but is consumed by melting before segregation of the high-Ti mare basalt liquid from the residue.

Technology requirements for advanced earth-orbital transportation systems, dual-mode propulsion

NASA Technical Reports Server (NTRS)

Haefeli, R. C.; Littler, E. G.; Hurley, J. B.; Winter, M. G.

1977-01-01

The application of dual-mode propulsion concepts to fully reusable single-stage-to-orbit (SSTO) vehicles is discussed. Dual-mode propulsion uses main rocket engines that consume hydrocarbon fuels as well as liquid hydrogen fuel. Liquid oxygen is used as the oxidizer. These engine concepts were integrated into transportation vehicle designs capable of vertical takeoff, delivering a payload to earth orbit, and return to earth with a horizontal landing. Benefits of these vehicles were assessed and compared with vehicles using single-mode propulsion (liquid hydrogen and oxygen engines). Technology requirements for such advanced transportation systems were identified. Figures of merit, including life-cycle cost savings and research costs, were derived for dual-mode technology programs, and were used for assessments of potential benefits of proposed technology activities. Dual-mode propulsion concepts display potential for significant cost and performance benefits when applied to SSTO vehicles.

Controlling Fluences of Reactive Species Produced by Multipulse DBDs onto Wet Tissue: Frequency and Liquid Thickness

NASA Astrophysics Data System (ADS)

Tian, Wei; Kushner, Mark J.

2015-09-01

Tissue covered by a thin liquid layer treated by atmospheric pressure plasmas for biomedical applications ultimately requires a reproducible protocol for human healthcare. The outcomes of wet tissue treatment by dielectric barrier discharges (DBDs) depend on the plasma dose which determines the integral fluences of radicals and ions onto the tissue. These fluences are controlled in part by frequency and liquid thickness. In this paper, we report on results from a computational investigation of multipulse DBDs interacting with wet tissue. The DBDs were simulated for 100 stationary or random streamers at different repetition rates and liquid thicknesses followed by 10 s to 2 min of afterglow. At 100 Hz, NOaq and OHaq are mixed by randomly striking streamers, although they have different rates of solvation. NOaq is nearly completely consumed by reactions with OHaq at the liquid surface. Only H2O2aq, produced through OHaq mutual reactions, survives to reach the tissue. After 100 pulses, the liquid becomes ozone-rich, in which the nitrous ion, NO2-aq, is converted to the nitric ion, NO3-aq. Reducing the pulse frequency to 10 Hz results in significant fluence of NOaq to the tissue as NOaq can escape during the interpulse period from the liquid surface where OHaq is formed. For the same reason, NO2-aq can also reach deeper into the liquid at lower frequency. Frequency and thickness of the liquid are methods to control the plasma produced aqueous species to the underlying tissue. Work supported by DOE (DE-SC0001319) and NSF (CHE-1124724).

In vitro human epidermal permeation of nicotine from electronic cigarette refill liquids and implications for dermal exposure assessment.

PubMed

Frasch, H Frederick; Barbero, Ana M

2017-11-01

Nicotine plus flavorings in a propylene glycol (PG) vehicle are the components of electronic cigarette liquids (e-liquids), which are vaporized and inhaled by the user. Dermal exposure to nicotine and e-liquids may occur among workers in mixing and filling of e-cigarettes in the manufacturing process. Inadvertent skin contact among consumers is also a concern. In vitro nicotine permeation studies using heat-separated human epidermis were performed with surrogate and two commercial e-liquids, neat and aqueous nicotine donor formulations. Steady-state fluxes (J ss ), and lag times (t lag ) were measured for each formulation. In addition, transient (4 h) exposure and finite dose (1-10 μl/cm 2 ) experiments were undertaken using one commercial e-liquid. Average J ss (μg/cm 2 /h) from formulations were: nicotine in PG (24 mg/ml): 3.97; commercial e-liquid containing menthol (25 mg/ml nicotine): 10.2; commercial e-liquid containing limonene (25 mg/ml nicotine): 23.7; neat nicotine: 175. E-liquid lag times ranged from 5 to 10 h. Absorbed fraction of nicotine from finite doses was ≈0.3 at 48 h. The data were applied to transient exposure and finite dose dermal exposure assessment models and to a simple pharmacokinetic model. Three illustrative exposure scenarios demonstrate use of the data to predict systemic uptake and plasma concentrations from dermal exposure. The data demonstrate the potential for significant nicotine absorption through skin contact with e-cigarette refill solutions and the neat nicotine used to mix them.

Plasma Jet Interactions with Liquids in Partial Fulfillment of an NRL Karles Fellowship

DTIC Science & Technology

2015-11-30

water (DI H2O) as the reference solution, two concentrations of NaCl mixtures (0.6 Molar, and 1.0 Molar saturated NaCl), and three electroless solutions...by diffusion) to the bulk surface in net excess; that oxygen ions/radicals are being consumed from the bulk by an electrolysis path way; or that the

Increasing In-School Food Consumption of an Elementary Student with Emotional/Behavioral Disorders: A Case Study

ERIC Educational Resources Information Center

Wood, Brenna K.; Flanagan, Timothy F.

2013-01-01

Researchers conducted the present case study to address the immediate need of a student who consumed food at home and refused all food and liquids in her elementary school setting. In order to increase in-school food consumption, researchers developed a multicomponent treatment package that included antecedent adjustments (time and place food was…

Radiation doses to members of the public near to Sellafield, Cumbria, from liquid discharges 1952-98.

PubMed

Jackson, D; Lambers, B; Gray, J

2000-06-01

Liquid wastes containing low levels of radioactivity have been discharged to the Irish Sea from the nuclear fuel reprocessing site at Sellafield since operations began in the early 1950s, and monitoring of radioactivity in foodstuffs has been undertaken over many years. Based on the best available monitoring data, supplemented by modelled values where necessary, doses to local critical groups have been reassessed using the most recent dosimetry. Contemporary habits data have been used where available, again supplemented by assumed habits where necessary. During the 1950s and 1960s the highest doses were received by individuals consuming Cumbrian Porphyra as laverbread, and peak doses around 0.8 to 1.0 mSv year(-1) have been estimated. During the 1970s and 1980s the critical exposure group switched to consumers of local fish and shellfish, with peak doses possibly reaching 2.5 to 3.0 mSv year(-1). Latterly, doses to all marine-related groups have declined to less than 150 to 200 microSv year(-1). At all times, doses have been within the appropriate limits set for members of the public.

Preservatives and fragrances in selected consumer-available cosmetics and detergents.

PubMed

Yazar, Kerem; Johnsson, Stina; Lind, Marie-Louise; Boman, Anders; Lidén, Carola

2011-05-01

Preservatives and fragrances are important and frequent skin sensitizers, found in a wide range of products intended for personal and occupational use. To examine the use of preservatives and fragrances in certain cosmetics and detergents on the market. The product types studied were shampoos, hair conditioners, liquid soaps, wet tissues, washing-up liquids, and multi-purpose cleaners. Ingredient labels of 204 cosmetic products and ingredient data sheets of 97 detergents, available on company websites, were examined. The preservatives most frequently identified were phenoxyethanol, methylparaben, sodium benzoate, propylparaben, and methylchloroisothiazolinone/methylisothiazolinone. Parabens were found in 44% of cosmetics and 9% of detergents; formaldehyde-releasers in 25% of cosmetics and 8% of detergents; and isothiazolinones in 23% of cosmetics and 28% of detergents. The fragrances most frequently identified were linalool, limonene, hexyl cinnamal, butylphenyl methylpropional, and citronellol. Eighty-eight per cent of the products contained fragrances, and any of the 26 fragrances requiring labelling were found in half of the cosmetics and one-third of the detergents. Several preservatives and fragrances with well-known skin-sensitizing potential were common in the examined product types. Such products may be used several times a day by consumers and workers. © 2010 John Wiley & Sons A/S.

Space Shuttle Projects

NASA Image and Video Library

1976-01-01

This is a cutaway illustration of the Space Shuttle external tank (ET) with callouts. The giant cylinder, higher than a 15-story building, with a length of 154-feet (47-meters) and a diameter of 27.5-feet (8.4-meters), is the largest single piece of the Space Shuttle. During launch, the ET also acts as a backbone for the orbiter and solid rocket boosters. Separate pressurized tank sections within the external tank hold the liquid hydrogen fuel and liquid oxygen oxidizer for the Shuttle's three main engines. During launch, the ET feeds the fuel under pressure through 17-inch (43.2-centimeter) ducts that branch off into smaller lines that feed directly into the main engines. The main engines consume 64,000 gallons (242,260 liters) of fuel each minute. Machined from aluminum alloys, the Space Shuttle's external tank is currently the only part of the launch vehicle that is not reused. After its 526,000-gallons (1,991,071 liters) of propellants are consumed during the first 8.5-minutes of flight, it is jettisoned from the orbiter and breaks up in the upper atmosphere, its pieces falling into remote ocean waters. The Marshall Space Flight Center was responsible for developing the ET.

Column Liquid Chromatography.

ERIC Educational Resources Information Center

Majors, Ronald E.; And Others

1984-01-01

Reviews literature covering developments of column liquid chromatography during 1982-83. Areas considered include: books and reviews; general theory; columns; instrumentation; detectors; automation and data handling; multidimensional chromatographic and column switching techniques; liquid-solid chromatography; normal bonded-phase, reversed-phase,…

Liquid metal porous matrix sliding electrical contact: A concept

NASA Technical Reports Server (NTRS)

Ferguson, H.

1973-01-01

Concept utilizes porous metal or nonmetal matrix containing liquid metal in porous structure and confines liquid metal to contact area between rotor and brush by capillary forces. System may also be used to lubricate bearing systems.

Is the soil quality monitoring an effective tool in consumers' protection of agricultural crops from cadmium soil contamination?-a case of the Silesia region (Poland).

PubMed

Piekut, Agata; Baranowska, Renata; Marchwińska-Wyrwał, Ewa; Ćwieląg-Drabek, Małgorzata; Hajok, Ilona; Dziubanek, Grzegorz; Grochowska-Niedworok, Elżbieta

2017-12-16

The monitoring of soil quality should be a control tool used to reduce the adverse health effects arising from exposure to toxic chemicals in soil through cultivated crop absorption. The aim of the study was to evaluate the effectiveness of the monitoring and control system of soil quality in Poland, in terms of consumer safety, for agricultural plants cultivated in areas with known serious cadmium contamination, such as Silesia Province. To achieve the objective, the contents of cadmium in soils and vegetables in the Silesia administrative area were examined. The obtained results were compared with the results of soil contamination from the quality monitoring of arable soil in Poland. The studies show a significant exceedance of the permissible values of cadmium in soil samples and the vegetables cultivated on that soil. The threat to consumer health is a valid concern, although this threat was not indicated by the results of the national monitoring of soil quality. The results indicated an unequal distribution of risk to consumers resulting from contaminated soil. Moreover, the monitoring systems should be designed at the local or regional scale to guarantee the safety of consumers of edible plants cultivated in the areas contaminated with cadmium.

Hyperspectral imaging system for whole corn ear surface inspection

NASA Astrophysics Data System (ADS)

Yao, Haibo; Kincaid, Russell; Hruska, Zuzana; Brown, Robert L.; Bhatnagar, Deepak; Cleveland, Thomas E.

2013-05-01

Aflatoxin is a mycotoxin produced mainly by Aspergillus flavus (A.flavus) and Aspergillus parasitiucus fungi that grow naturally in corn. Very serious health problems such as liver damage and lung cancer can result from exposure to high toxin levels in grain. Consequently, many countries have established strict guidelines for permissible levels in consumables. Conventional chemical-based analytical methods used to screen for aflatoxin such as thin-layer chromatography (TLC) and high performance liquid chromatography (HPLC) are time consuming, expensive, and require the destruction of samples as well as proper training for data interpretation. Thus, it has been a continuing effort within the research community to find a way to rapidly and non-destructively detect and possibly quantify aflatoxin contamination in corn. One of the more recent developments in this area is the use of spectral technology. Specifically, fluorescence hyperspectral imaging offers a potential rapid, and non-invasive method for contamination detection in corn infected with toxigenic A.flavus spores. The current hyperspectral image system is designed for scanning flat surfaces, which is suitable for imaging single or a group of corn kernels. In the case of a whole corn cob, it is preferred to be able to scan the circumference of the corn ear, appropriate for whole ear inspection. This paper discusses the development of a hyperspectral imaging system for whole corn ear imaging. The new instrument is based on a hyperspectral line scanner using a rotational stage to turn the corn ear.

Effect of land use on methane flux from soil.

PubMed

Chan, A S; Parkin, T B

2001-01-01

The precise effects of natural and disturbed terrestrial systems on the atmospheric CH4 pool are uncertain. This study was conducted to quantify and compare CH4 fluxes from a variety of ecosystems in central Iowa. We investigated agricultural systems under different management practices, a hardwood forest site, native and restored prairies, and a municipal landfill. Flux measurements were obtained using a closed-chamber method, and measurements were compiled by sampling over the 1993 and 1994 growing seasons. In 1993, most of the agricultural sites were net CH4 producers with cumulative CH4 fluxes ranging from -0.02 to 3.19 g m(-2) over the 258-d sampling season, while the natural ecosystems were net CH4 consumers, with cumulative seasonal fluxes ranging from -0.27 to -0.07 g m-2 258 d(-1). In 1994, only the landfill and the agricultural site treated with broadcast liquid swine manure (LSM) were net CH4 producers, while the remainder of the natural and agricultural ecosystems were net CH4 consumers, with mean seasonal flux rates ranging from -0.43 to -0.008 g m(-2) 271 d(-1). We hypothesize that the differences in CH4 fluxes between the two years are due to differences in rainfall. To illustrate the integration between land use and CH4 flux, we computed an area-weighted soil CH4 flux for the state of Iowa. Our calculations yielded a net average soil CH4 flux of 139,000 Mg CH4 for 1993 and 1994.

Cross-cultural acceptance of a traditional yoghurt-like product made from fermented cereal.

PubMed

Akissoé, Noël H; Sacca, Carole; Declemy, Anne-Laure; Bechoff, Aurelie; Anihouvi, Victor B; Dalodé, Générose; Pallet, Dominique; Fliedel, Géneviève; Mestres, Christian; Hounhouigan, Joseph D; Tomlins, Keith I

2015-07-01

Akpan is a traditional ready-to-drink fermented yoghurt-like cereal beverage consumed in urban and rural areas in Benin. With the aim of adapting the product to new local and export markets, this work maps African and European consumer preferences for different types of Akpan. A sensory profile of Akpan was created and consumer tests were conducted with 103 consumers of African origin and 74 consumers of European origin. Consumer acceptance was significantly correlated with fermented odour (r = -0.94) and milky taste (r = 0.92-0.97) attributes. Cluster analysis revealed different behaviour by African and European consumers with respect to acceptability of Akpan; European consumers did not like the sour taste and African consumers liked an intense sweet milky taste. This study provides information on how Akpan, and other fermented yoghurt-type cereal products, could be adapted to African and European consumer preferences. © 2014 Society of Chemical Industry.

7 CFR 1710.103 - Area coverage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... demands electric service only during certain seasons of the year. A temporary consumer is a seasonal or year-round consumer that demands electric service over a period of less than five years. (c) Borrowers...

7 CFR 1710.103 - Area coverage.

Code of Federal Regulations, 2010 CFR

2010-01-01

... demands electric service only during certain seasons of the year. A temporary consumer is a seasonal or year-round consumer that demands electric service over a period of less than five years. (c) Borrowers...

30 CFR 57.4262 - Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Underground transformer stations, combustible... and Control Firefighting Equipment § 57.4262 Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms, compressor rooms, and hoist rooms. Transformer stations, storage...

30 CFR 57.4262 - Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Underground transformer stations, combustible... and Control Firefighting Equipment § 57.4262 Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms, compressor rooms, and hoist rooms. Transformer stations, storage...

30 CFR 57.4262 - Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Underground transformer stations, combustible... and Control Firefighting Equipment § 57.4262 Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms, compressor rooms, and hoist rooms. Transformer stations, storage...

30 CFR 57.4262 - Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Underground transformer stations, combustible... and Control Firefighting Equipment § 57.4262 Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms, compressor rooms, and hoist rooms. Transformer stations, storage...

30 CFR 57.4262 - Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Underground transformer stations, combustible... and Control Firefighting Equipment § 57.4262 Underground transformer stations, combustible liquid storage and dispensing areas, pump rooms, compressor rooms, and hoist rooms. Transformer stations, storage...

46 CFR 153.935a - Storage of cargo samples.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety...: (1) A designated and ventilated space in the cargo area of the vessel; or (2) An area approved by the... to the cargo samples; and (3) Apart from other sample bottles containing incompatible liquids (See...

46 CFR 153.935a - Storage of cargo samples.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety...: (1) A designated and ventilated space in the cargo area of the vessel; or (2) An area approved by the... to the cargo samples; and (3) Apart from other sample bottles containing incompatible liquids (See...

46 CFR 153.935a - Storage of cargo samples.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety...: (1) A designated and ventilated space in the cargo area of the vessel; or (2) An area approved by the... to the cargo samples; and (3) Apart from other sample bottles containing incompatible liquids (See...

46 CFR 153.935a - Storage of cargo samples.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety...: (1) A designated and ventilated space in the cargo area of the vessel; or (2) An area approved by the... to the cargo samples; and (3) Apart from other sample bottles containing incompatible liquids (See...

Trophic segregation of a fish assemblage along lateral depth gradients in a subtropical coastal lagoon revealed by stable isotope analyses.

PubMed

Mont'Alverne, R; Pereyra, P E R; Garcia, A M

2016-07-01

Stable isotopes were used to evaluate the hypothesis that fish assemblages occurring in shallow and deep areas of a large coastal lagoon are structured in partially segregated trophic modules with consumers showing contrasting reliance on benthic or pelagic food sources. The results revealed that fishes in deep areas were mainly dependent on particulate organic matter in the sediment (SOM), whereas emergent macrophytes were as important as SOM to fish consumers in shallow areas. Conceptual trophic diagrams depicting relationships among basal food sources and consumers in different regions of the lagoon highlighted the greater use of multiple basal food sources by more feeding mode functional guilds in shallow water compared with the use of predominantly benthic resources (SOM) in deep areas. The findings appear to corroborate the initial hypothesis and offer complementary perspectives in understanding the role of spatial ecology in structuring coastal ecosystem function and productivity. © 2016 The Fisheries Society of the British Isles.

An Experimental Examination of Combustion of Isolated Liquid Fuel Droplets with Polymeric and Nanoparticle Additives

NASA Astrophysics Data System (ADS)

Ghamari, Mohsen

In spite of recent attention to renewable sources of energy, liquid hydrocarbon fuels are still the main source of energy for industrial and transportation systems. Manufactures and consumers are consistently looking for ways to optimize the efficiency of fuel combustion in terms of cost, emissions and consumer safety. In this regard, increasing burning rate of liquid fuels has been of special interest in both industrial and transportation systems. Recent studies have shown that adding combustible nano-particles could have promising effects on improving combustion performance of liquid fuels. Combustible nano-particles could enhance radiative and conductive heat transfer and also mixing within the droplet. Polymeric additive have also shown promising effect on improving fire safety by suppressing spreading behavior and splatter formation in case of crash scenario. Polymers are also known to have higher burning rate than regular hydrocarbon fuels. Therefore adding polymeric additive could have the potential to increase the burning rate. In this work, combustion dynamics of liquid fuel droplets with both polymeric and nanoparticle additives is studied in normal gravity. High speed photography is employed and the effect of additive concentration on droplet burning rate, burning time, extinction and soot morphology is investigated. Polymer added fuel was found to have a volatility controlled combustion with four distinct regimes. The first three zones are associated with combustion of base fuel while the polymer burns last and after a heating zone because of its higher boiling point. Polymer addition reduces the burning rate of the base fuel in the first zone by means of increasing viscosity and results in nucleate boiling and increased burning rates in the second and third stages. Overall, polymer addition resulted in a higher burning rate and shorter burning time in most of the scenarios. Colloidal suspensions of carbon-based nanomaterials in liquid fuels were also tested at different particle loadings. It was found that dispersing nanoparticles results in higher burning rate by means of enhanced radiative heat absorption and thermal conductivity. An optimum particle loading was found for each particle type at which the maximum burning rate was achieved. It was observed that the burning rate again starts to reduce after this optimum point most likely due to the formation of large aggregates that reduce thermal conductivity and suppress the diffusion of species.

ERIC First Analysis: 1980-81 National High School Debate Resolutions (How Can the Interests of United States Consumers Best Be Served?).

ERIC Educational Resources Information Center

Wagner, David L.

The five chapters of this book are intended to prepare high school debaters and their coaches for the efficient investigation of the 1980-81 High Scbool Debate Problem Area and Resolutions. The first chapter contains an overview of the problem area--consumer interests--describing the basic concepts of regulation and risk, the definitions of the…

High liquid fuel yielding biofuel processes and a roadmap for the future transportation

NASA Astrophysics Data System (ADS)

Singh, Navneet R.

In a fossil-fuel deprived world when crude oil will be scarce and transportation need cannot be met with electricity and transportation liquid fuel must be produced, biomass derived liquid fuels can be a natural replacement. However, the carbon efficiency of the currently known biomass to liquid fuel conversion processes ranges from 35-40%, yielding 90 ethanol gallon equivalents (ege) per ton of biomass. This coupled with the fact that the efficiency at which solar energy is captured by biomass (<1%) is significantly lower than H 2 (10-27%) and electricity (20-42%), implies that sufficient land area is not available to meet the need for the entire transportation sector. To counter this dilemma, a number of processes have been proposed in this work: a hybrid hydrogen-carbon (H2CAR) process based on biomass gasification followed by the Fischer-Tropsch process such that 100% carbon efficiency is achieved yielding 330 ege/ton biomass using hydrogen derived from a carbon-free energy. The hydrogen requirement for the H2CAR process is 0.33 kg/liter of diesel. To decrease the hydrogen requirement associated with the H2CAR process, a hydrogen bio-oil (H2Bioil) process based on biomass fast-hydropyrolysis/hydrodeoxygenation is proposed which can achieve liquid fuel yield of 215 ege/ton consuming 0.11 kg hydrogen per liter of oil. Due to the lower hydrogen consumption of the H2Bioil process, synergistically integrated transition pathways are feasible where hot syngas derived from coal gasification (H2Bioil-C) or a natural gas reformer (H 2Bioil-NG) is used to supply the hydrogen and process heat for the biomass fast-hydropyrolysis/hydrodeoxygenation. Another off-shoot of the H2Bioil process is the H2Bioil-B process, where hydrogen required for the hydropyrolysis is obtained from gasification of a fraction of the biomass. H2Bioil-B achieves the highest liquid fuel yield (126-146 ege/ton of biomass) reported in the literature for any self-contained conversion of biomass to biofuel. Finally, an integration of the H2Bioil process with the H2CAR process is suggested which can achieve 100% carbon efficiency (330 ege/ton of biomass) at the expense of 0.24 kg hydrogen/liter of oil. A sun-to-fuel efficiency analysis shows that extracting CO2 from air and converting it to liquid fuel is at least two times more efficient than growing dedicated fuel crops and converting them to liquid fuel even for the highest biomass growth rates feasible by algae. This implies that liquid fuel should preferably be produced from sustainably available waste (SAW) biomass first and if the SAW biomass is unable to meet the demand for liquid fuel, then, CO2 should be extracted from air and converted to liquid fuel, rather than growing biomass. Furthermore, based on the Sun-to-Wheels recovery for different transportation pathways, synergistic and complementary use of electricity, hydrogen and biomass, all derived from solar energy, is presented in an energy efficient roadmap to successfully propel the entire future transportation sector.

Correlation of chemical evaporation rate with vapor pressure.

PubMed

Mackay, Donald; van Wesenbeeck, Ian

2014-09-02

A new one-parameter correlation is developed for the evaporation rate (ER) of chemicals as a function of molar mass (M) and vapor pressure (P) that is simpler than existing correlations. It applies only to liquid surfaces that are unaffected by the underlying solid substrate as occurs in the standard ASTM evaporation rate test and to quiescent liquid pools. The relationship has a sounder theoretical basis than previous correlations because ER is correctly correlated with PM rather than P alone. The inclusion of M increases the slope of previous log ER versus log P regressions to a value close to 1.0 and yields a simpler one-parameter correlation, namely, ER (μg m(-1) h(-1)) = 1464P (Pa) × M (g mol(-1)). Applications are discussed for the screening level assessment and ranking of chemicals for evaporation rate, such as pesticides, fumigants, and hydrocarbon carrier fluids used in pesticide formulations, liquid consumer products used indoors, and accidental spills of liquids. The mechanistic significance of the single parameter as a mass-transfer coefficient or velocity is discussed.

Evaluation of transfer rates of multiple pesticides from green tea into infusion using water as pressurized liquid extraction solvent and ultra-performance liquid chromatography tandem mass spectrometry.

PubMed

Chen, Hongping; Pan, Meiling; Liu, Xin; Lu, Chengyin

2017-02-01

Pesticide residues could be transferred from tea into its infusion and by-products, and subsequently consumed by humans. Extra extraction conditions may induce more pesticide leaching into the infusion and by-products of tea and cause greater damage to humans. The aim of this study is to evaluate the infusion of multiple pesticides from green tea into hot water via pressurized liquid extraction. The results showed that pesticides in spiked samples generally have higher leaching (0.8-45.0%) than those in the positive samples. There was a marked rise of transfer rates when water solubility increased from 20mgL(-1) to 450mgL(-1) and LogKow decreased from 6 to 4. All pesticides had more leaching into hot water using pressurized liquid extraction than traditional tea brewing. This study helps in risk assessment of pesticide residues and in the formulation of maximum residue levels (MRLs) in tea and its by-products. Copyright © 2016 Elsevier Ltd. All rights reserved.

'Real-world' compensatory behaviour with low nicotine concentration e-liquid: subjective effects and nicotine, acrolein and formaldehyde exposure.

PubMed

Dawkins, Lynne; Cox, Sharon; Goniewicz, Maciej; McRobbie, Hayden; Kimber, Catherine; Doig, Mira; Kośmider, Leon

2018-06-07

To compare the effects of i) high versus low nicotine concentration e-liquid, ii) fixed versus adjustable power and iii) the interaction between the two on: a) vaping behaviour, b) subjective effects, c) nicotine intake, and d) exposure to acrolein and formaldehyde in e-cigarette users vaping in their everyday setting. Counterbalanced, repeated measures with four conditions: i) low nicotine (6 mg/mL)/fixed power; ii) low nicotine/adjustable power; iii) high nicotine (18 mg/mL)/fixed power; iv) high nicotine/adjustable power. London and the South East, England. Twenty experienced e-cigarette users (recruited between September 2016 and February 2017) vaped ad libitum using an eVic Supreme™ with a 'Nautilus Aspire' tank over four weeks (one week per condition). Puffing patterns (daily puff number [PN], puff duration [PD], inter-puff interval [IPI]), mL of e-liquid consumed, changes to power (where permitted), and subjective effects (urge to vape, nicotine withdrawal symptoms) were measured in each condition. Nicotine intake was measured via salivary cotinine. 3-hydroxypropylmercapturic acid (3-HPMA), a metabolite of the toxicant acrolein, and formate, a metabolite of the carcinogen formaldehyde, were measured in urine. There was a significant nicotine concentration x power interaction for PD (p<0.01). PD was longer with low nicotine/fixed power compared with i) high nicotine/fixed power (p< 0.001 and ii) low nicotine/adjustable power (p< 0.01). PN and liquid consumed were higher in the low versus high nicotine condition (main effect of nicotine, p<0.05). Urge to vape and withdrawal symptoms were lower, and nicotine intake was higher, in the high nicotine condition (main effects of nicotine: p<0.01). Whilst acrolein levels did not differ, there was a significant nicotine x power interaction for formaldehyde (p<0.05). Use of a lower nicotine concentration e-liquid may be associated with compensatory behaviour (e.g., higher number and duration of puffs) and increases in negative affect, urge to vape, and formaldehyde exposure. This article is protected by copyright. All rights reserved.

Caramel color in soft drinks and exposure to 4-methylimidazole: a quantitative risk assessment.

PubMed

Smith, Tyler J S; Wolfson, Julia A; Jiao, Ding; Crupain, Michael J; Rangan, Urvashi; Sapkota, Amir; Bleich, Sara N; Nachman, Keeve E

2015-01-01

Caramel color is added to many widely-consumed beverages as a colorant. Consumers of these beverages can be exposed to 4-methylimidazole (4-MEI), a potential carcinogen formed during its manufacture. California's Proposition 65 law requires that beverages containing 4-MEI concentrations corresponding to exposures that pose excess cancer risks > 1 case per 100,000 exposed persons (29 μg 4-MEI/day) carry warning labels. Using ultrahigh-performance liquid chromatography-tandem mass spectrometry, we assessed 4-MEI concentrations in 12 beverages purchased in California and a geographically distant metropolitan area (New York) in which warning labels are not required. In addition, we characterized beverage consumption by age and race/ethnicity (using weighted means calculated from logistic regressions) and assessed 4-MEI exposure and resulting cancer risks and US population cancer burdens attributable to beverage consumption. Data on beverage consumption were obtained from the National Health and Nutrition Examination Survey, dose-response data for 4-MEI were obtained from the California Environmental Protection Agency Office of Environmental Health Hazards Assessment, and data on population characteristics were obtained from the U.S. Census Bureau. Of the 12 beverages, Malta Goya had the highest 4-MEI concentration (915.8 to 963.3μg/L), lifetime average daily dose (LADD - 8.04x10-3 mg/kgBW-day), lifetime excess cancer risk (1.93x10-4) and burden (5,011 cancer cases in the U.S. population over 70 years); Coca-Cola had the lowest value of each (4-MEI: 9.5 to 11.7μg/L; LADD: 1.01x10-4 mg/kgBW-day; risk: 1.92x10-6; and burden: 76 cases). 4-MEI concentrations varied considerably by soda and state/area of purchase, but were generally consistent across lots of the same beverage purchased in the same state/area. Routine consumption of certain beverages can result in 4-MEI exposures > 29 μg/day. State regulatory standards appear to have been effective in reducing exposure to carcinogens in some beverages. Federal regulation of 4-MEI in caramel color may be appropriate.

Caramel Color in Soft Drinks and Exposure to 4-Methylimidazole: A Quantitative Risk Assessment

PubMed Central

Smith, Tyler J. S.; Wolfson, Julia A.; Jiao, Ding; Crupain, Michael J.; Rangan, Urvashi; Sapkota, Amir; Bleich, Sara N.; Nachman, Keeve E.

2015-01-01

Caramel color is added to many widely-consumed beverages as a colorant. Consumers of these beverages can be exposed to 4-methylimidazole (4-MEI), a potential carcinogen formed during its manufacture. California’s Proposition 65 law requires that beverages containing 4-MEI concentrations corresponding to exposures that pose excess cancer risks > 1 case per 100,000 exposed persons (29 μg 4-MEI/day) carry warning labels. Using ultrahigh-performance liquid chromatography-tandem mass spectrometry, we assessed 4-MEI concentrations in 12 beverages purchased in California and a geographically distant metropolitan area (New York) in which warning labels are not required. In addition, we characterized beverage consumption by age and race/ethnicity (using weighted means calculated from logistic regressions) and assessed 4-MEI exposure and resulting cancer risks and US population cancer burdens attributable to beverage consumption. Data on beverage consumption were obtained from the National Health and Nutrition Examination Survey, dose-response data for 4-MEI were obtained from the California Environmental Protection Agency Office of Environmental Health Hazards Assessment, and data on population characteristics were obtained from the U.S. Census Bureau. Of the 12 beverages, Malta Goya had the highest 4-MEI concentration (915.8 to 963.3μg/L), lifetime average daily dose (LADD - 8.04x10-3 mg/kgBW-day), lifetime excess cancer risk (1.93x10-4) and burden (5,011 cancer cases in the U.S. population over 70 years); Coca-Cola had the lowest value of each (4-MEI: 9.5 to 11.7μg/L; LADD: 1.01x10-4 mg/kgBW-day; risk: 1.92x10-6; and burden: 76 cases). 4-MEI concentrations varied considerably by soda and state/area of purchase, but were generally consistent across lots of the same beverage purchased in the same state/area. Routine consumption of certain beverages can result in 4-MEI exposures > 29 μg/day. State regulatory standards appear to have been effective in reducing exposure to carcinogens in some beverages. Federal regulation of 4-MEI in caramel color may be appropriate. PMID:25693062

Counselors Beware! Clients Have Rights!

ERIC Educational Resources Information Center

Eberlein, Larry

1977-01-01

Examines the area of consumer rights and counselor legal responsibilities in light of legislation and precedence. The article is arranged according to questions consumers ask, questions students want to know, and questions counselors need to know. (HMV)

Effects of different levels of supplementation of a 50:50 mixture of molasses:crude glycerol on performance, Bermuda grass hay intake, and nutrient digestibility of beef cattle.

PubMed

Ciriaco, F M; Henry, D D; Mercadante, V R G; Schulmeister, T; Ruiz-Moreno, M; Lamb, G C; DiLorenzo, N

2015-05-01

Two experiments were performed to evaluate the effects of different levels of supplementation with a 50:50 (as-fed) mixture of molasses:crude glycerol on animal performance, total tract digestibility of nutrients, and ruminal in situ degradability of nutrients in beef heifers and steers consuming Tifton 85 Bermuda grass (Cynodon spp.) hay. For Exp. 1, 24 Angus crossbred heifers (380 ± 31 kg BW) were used in a generalized randomized block design. For Exp. 2, 8 ruminally cannulated Angus crossbred steers (323 ± 42 kg BW) were used in a 4 × 4 duplicated Latin square design. For both experiments, animals were housed in individual pens at the University of Florida Feed Efficiency Facility, had ad libitum access to Tifton 85 Bermuda grass hay, and were randomly assigned to 1 of 4 treatments: 1) CTRL, no supplementation; 2) SUP1, 0.45 kg/d (as fed) of 50:50 mixture; 3) SUP3, 1.36 kg/d (as fed) of 50:50 mixture; and 4) SUP5, 2.27 kg/d (as fed) of a 50:50 mixture. Individual feed intake was recorded. Total DMI increased linearly (P = 0.005) as the level of supplementation increased. Hay intake ranged from 1.36 (CTRL) to 1.23% (SUP5) of BW, and was not affected (P ≥ 0.10) by liquid supplementation. Final BW was not affected by liquid supplementation ( ≥ 0.10). There was a linear increase (P = 0.027) in ADG as the liquid supplementation amounts increased. Liquid supplementation did not affect G:F (P ≥ 0.10). Apparent total tract digestibility of DM, OM, NDF, and ADF increased linearly (P < 0.001), while CP total tract digestibility decreased linearly (P = 0.002) as the level of supplementation increased. Ruminal pH was decreased linearly (P = 0.012) as the level of supplementation increased. No effect (P ≥ 0.10) of liquid supplementation was detected on lag time for NDF and ADF content of bermudagrass hay; however, rate of degradation (Kd) of NDF tended (P = 0.076) to be affected cubically by liquid supplementation. In addition, liquid supplementation linearly decreased (P < 0.05) ED of OM, CP, NDF, and ADF. In conclusion, supplementing up to 2.27 kg/d of a 50:50 mixture of molasses:crude glycerol may stimulate microbial growth and fermentative activity, thereby increasing nutrient digestibility. Increased fiber digestion, along with energy supplementation, led to increased ADG in heifers consuming Bermuda grass hay.

Effects of surface tension and intraluminal fluid on mechanics of small airways.

PubMed

Hill, M J; Wilson, T A; Lambert, R K

1997-01-01

Airway constriction is accompanied by folding of the mucosa to form ridges that run axially along the inner surface of the airways. The mucosa has been modeled (R. K. Lambert. J. Appl. Physiol. 71:666-673, 1991) as a thin elastic layer with a finite bending stiffness, and the contribution of its bending stiffness to airway elastance has been computed. In this study, we extend that work by including surface tension and intraluminal fluid in the model. With surface tension, the pressure on the inner surface of the elastic mucosa is modified by the pressure difference across the air-liquid interface. As folds form in the mucosa, intraluminal fluid collects in pools in the depressions formed by the folds, and the curvature of the air-liquid interface becomes nonuniform. If the amount of intraluminal fluid is small, < 2% of luminal volume, the pools of intraluminal fluid are small, the air-liquid interface nearly coincides with the surface of the mucosa, and the area of the air-liquid interface remains constant as airway cross-sectional area decreases. In that case, surface energy is independent of airway area, and surface tension has no effect on airway mechanics. If the amount of intraluminal fluid is > 2%, the area of the air-liquid interface decreases as airway cross-sectional area decreases. and surface tension contributes to airway compression. The model predicts that surface tension plus intraluminal fluid can cause an instability in the area-pressure curve of small airways. This instability provides a mechanism for abrupt airway closure and abrupt reopening at a higher opening pressure.

Influence of the bubbles on the turbulence in the liquid in hydrodynamic cavitation through a venturi

NASA Astrophysics Data System (ADS)

Fuzier, Sylvie; Coutier Delgosha, Olivier; Coudert, S. Ébastien; Dazin, Antoine

2011-11-01

The physical description of hydrodynamic cavitation is complex as it includes strongly unsteady, turbulent and phase change phenomena. Because the bubbles in the cavitation area render this zone opaque, nonintrusive experimental observation inside this zone is difficult and little is known about the detailed bubble, flow structure and physics inside. A novel approach using LIF-PIV to investigate the dynamics inside the cavitation area generated through a venturi is presented. The velocity in the liquid and of the bubbles are measured simultaneously and correlated with areas of various bubble structure. The influence of the bubble structure on the turbulence in the liquid is also studied.

Models of consumer value cocreation in health care.

PubMed

Nambisan, Priya; Nambisan, Satish

2009-01-01

In recent years, consumer participation in health care has gained critical importance as health care organizations (HCOs) seek varied avenues to enhance the quality and the value of their offerings. Many large HCOs have established online health communities where health care consumers (patients) can interact with one another to share knowledge and offer emotional support in disease management and care. Importantly, the focus of consumer participation in health care has moved beyond such personal health care management as the potential for consumers to participate in innovation and value creation in varied areas of the health care industry becomes increasingly evident. Realizing such potential, however, will require HCOs to develop a better understanding of the varied types of consumer value cocreation that are enabled by new information and communication technologies such as online health communities and Web 2.0 (social media) technologies. This article seeks to contribute toward such an understanding by offering a concise and coherent theoretical framework to analyze consumer value cocreation in health care. We identify four alternate models of consumer value cocreation-the partnership model, the open-source model, the support-group model, and the diffusion model-and discuss their implications for HCOs. We develop our theoretical framework by drawing on theories and concepts in knowledge creation, innovation management, and online communities. A set of propositions are developed by combining theoretical insights from these areas with real-world examples of consumer value cocreation in health care. The theoretical framework offered here informs on the potential impact of the different models of consumer value cocreation on important organizational variables such as innovation cost and time, service quality, and consumer perceptions of HCO. An understanding of the four models of consumer value cocreation can help HCOs adopt appropriate strategies and practices to embrace consumers as partners in the development and delivery of innovative health care products and services.

Consumer bill of rights and responsibilities: report to the President of the United States. Advisory Commission on Consumer Protection and Quality in the Health Care Industry.

PubMed

1998-01-01

President Clinton appointed a 34-member Advisory Commission on Consumer Protection and Quality in the Healthcare Industry in 1997, and the group has adopted a statement of consumers' rights and responsibilities. The document addresses eight areas, including information disclosure on health plans, benefits, and qualifications of healthcare providers, choice of providers and plans, access to emergency services, patients' rights to participate in treatment decisions, mutual respect and nondiscrimination, confidentiality of health and personal information, complaints and the appeals process, and the responsibilities of consumers.

Cryogenic Technology Development for Exploration Missions

NASA Technical Reports Server (NTRS)

Chato, David J.

2007-01-01

This paper reports the status and findings of different cryogenic technology research projects in support of the President s Vision for Space Exploration. The exploration systems architecture study is reviewed for cryogenic fluid management needs. It is shown that the exploration architecture is reliant on the cryogenic propellants of liquid hydrogen, liquid oxygen and liquid methane. Needs identified include: the key technologies of liquid acquisition devices, passive thermal and pressure control, low gravity mass gauging, prototype pressure vessel demonstration, active thermal control; as well as feed system testing, and Cryogenic Fluid Management integrated system demonstration. Then five NASA technology projects are reviewed to show how these needs are being addressed by technology research. Projects reviewed include: In-Space Cryogenic Propellant Depot; Experimentation for the Maturation of Deep Space Cryogenic Refueling Technology; Cryogenic Propellant Operations Demonstrator; Zero Boil-Off Technology Experiment; and Propulsion and Cryogenic Advanced Development. Advances are found in the areas of liquid acquisition of liquid oxygen, mass gauging of liquid oxygen via radio frequency techniques, computational modeling of thermal and pressure control, broad area cooling thermal control strategies, flight experiments for resolving low gravity issues of cryogenic fluid management. Promising results are also seen for Joule-Thomson pressure control devices in liquid oxygen and liquid methane and liquid acquisition of methane, although these findings are still preliminary.

Consumer behavior: a quadrennium.

PubMed

Jacoby, J; Johar, G V; Morrin, M

1998-01-01

Consumer behavior continued to attract additional researchers and publication outlets from 1993 through 1996. Both general interest and domain-specific scholarly contributions are discussed, along with limitations and suggested areas for future research. A concluding section observes that the integrity of consumer research is unnecessarily compromised by the failure of the major scholarly association in the field to develop and adopt a code of researcher ethics.

Bio-Liquid Morphological Analysis

PubMed Central

Shatokhina, S.N.; Shabalin, V.N.; Buzoverya, M.E.; Punin, V.T.

2004-01-01

Information is presented on the new scientific line in medicine and biology: bio-liquid morphology. The interdisciplinary character of the given research area is emphasized. The problems and prospects of bio-liquid morphological analysis development both in applied and fundamental aspects are discussed. PMID:15349509

Trophic coupling between two adjacent benthic food webs within a man-made intertidal area: A stable isotopes evidence

NASA Astrophysics Data System (ADS)

Schaal, Gauthier; Riera, Pascal; Leroux, Cédric

2008-04-01

This study aimed at establishing the effects of human-made physical modifications on the trophic structure and functioning of an intertidal benthic food web in Arcachon Bay (France). The main food sources and the most representative consumers were sampled on an artificial rocky dyke and its adjacent seagrass meadow. The food sources of consumers were inferred through the use of carbon and nitrogen stable isotopes. The contributions of the different food sources to the diets of the consumers were established using the Isosource mixing model. In order to reduce the range of feasible contributions, additional non-isotopic constraints were added when necessary to the outputs of this model. We observed a more complex food web than previously shown for artificial habitats. Moreover, it appears that several consumers inhabiting the artificial environment base most of their diet on allochtonous eelgrass-derived detritus. In turn, several consumers inhabiting the eelgrass meadow consumed significantly macroalgae-derived material originating from the adjacent artificial rocky area. These results point out that the food webs associated to adjacent habitats can influence each other through the utilisation of exported organic matter.

Liquid cooled counter flow turbine bucket

DOEpatents

Dakin, James T.

1982-09-21

Means and a method are provided whereby liquid coolant flows radially outward through coolant passages in a liquid cooled turbine bucket under the influence of centrifugal force while in contact with countercurrently flowing coolant vapor such that liquid is entrained in the flow of vapor resulting in an increase in the wetted cooling area of the individual passages.

[Dynamics of pleural liquid in hydrothorax].

PubMed

Nakamura, T; Iwaskai, Y; Gotoh, T; Hiramori, N; Fujii, T; Sakai, M; Nakagaki, Y; Arimoto, T; Mizobuchi, K; Hashikura, H

1994-12-01

The basics of pleural liquid dynamics are summarized. The normal pleural cavity contains a small amount of pleural liquid (0.1-0.3 ml/kg). Its protein concentration is about 1.0 g/dl and its pH is 7.6. The normal flow of pleural liquid is gravity dependent, and pleural liquid flows from the costal to the mediastinal region. In experimental hydrothorax, the pleural liquid was removed mainly via lymphatics. The turnover of the pleural liquid is rapid, and it depends on the area of contact between pleural liquid and pleural and on the blood flow to the pleura.

Short-term exposure to a diet high in fat and sugar, or liquid sugar, selectively impairs hippocampal-dependent memory, with differential impacts on inflammation.

PubMed

Beilharz, J E; Maniam, J; Morris, M J

2016-06-01

Chronic high-energy diets are known to induce obesity and impair memory; these changes have been associated with inflammation in brain areas crucial for memory. In this study, we investigated whether inflammation could also be related to diet-induced memory deficits, prior to obesity. We exposed rats to chow, chow supplemented with a 10% sucrose solution (Sugar) or a diet high in fat and sugar (Caf+Sugar) and assessed hippocampal-dependent and perirhinal-dependent memory at 1 week. Both high-energy diet groups displayed similar, selective hippocampal-dependent memory deficits despite the Caf+Sugar rats consuming 4-5 times more energy, and weighing significantly more than the other groups. Extreme weight gain and excessive energy intake are therefore not necessary for deficits in memory. Weight gain across the diet period however, was correlated with the memory deficits, even in the Chow rats. The Sugar rats had elevated expression of a number of inflammatory genes in the hippocampus and WAT compared to Chow and Caf+Sugar rats but not in the perirhinal cortex or hypothalamus. Blood glucose concentrations were also elevated in the Sugar rats, and were correlated with the hippocampal inflammatory markers. Together, these results indicate that liquid sugar can rapidly elevate markers of central and peripheral inflammation, in association with hyperglycemia, and this may be related to the memory deficits in the Sugar rats. Copyright © 2016 Elsevier B.V. All rights reserved.

Pseudolinear gradient ultrahigh-pressure liquid chromatography using an injection valve assembly.

PubMed

Xiang, Yanqiao; Liu, Yansheng; Stearns, Stanley D; Plistil, Alex; Brisbin, Martin P; Lee, Milton L

2006-02-01

The use of ultrahigh pressures in liquid chromatography (UHPLC) imposes stringent requirements on hardware such as pumps, valves, injectors, connecting tubing, and columns. One of the most difficult components of the UHPLC system to develop has been the sample injector. Static-split injection, which can be performed at pressures up to 6900 bar (100,000 psi), consumes a large sample volume and is very irreproducible. A pressure-balanced injection valve provided better reproducibility, shorter injection time, reduced sample consumption, and greater ease of use; however, it could only withstand pressures up to approximately 1000 bar (15,000 psi). In this study, a new injection valve assembly that can operate at pressures as high as 2070 bar (30,000 psi) was evaluated for UHPLC. This assembly contains six miniature electronically controlled needle valves to provide accurate and precise volumes for introduction into the capillary LC column. It was found that sample volumes as small as several tenths of a nanoliter can be injected, which are comparable to the results obtained from the static-split injector. The reproducibilities of retention time, efficiency, and peak area were investigated, and the results showed that the relative standard deviations of these parameters were small enough for quantitative analyses. Separation experiments using the UHPLC system with this new injection valve assembly showed that this new injector is suitable for both isocratic and gradient operation modes. A newly designed capillary connector was used at a pressure as high as 2070 bar (30,000 psi).

Consuming High-Carotenoid Fruit and Vegetables Influences Skin Yellowness and Plasma Carotenoids in Young Women: A Single-Blind Randomized Crossover Trial.

PubMed

Pezdirc, Kristine; Hutchesson, Melinda J; Williams, Rebecca L; Rollo, Megan E; Burrows, Tracy L; Wood, Lisa G; Oldmeadow, Christopher; Collins, Clare E

2016-08-01

Consumption of dietary carotenoids from fruits and vegetables (F/V) leads to accumulations in human skin, altering skin yellowness. The influence of the quantity of F/V consumed on skin yellowness and plasma carotenoid concentrations has not been examined previously. To compare the influence of consuming high-carotenoid-containing F/V (HCFV) (176,425 μg beta carotene/wk) vs low-carotenoid F/V (LCFV) (2,073 μg beta carotene/wk) on skin yellowness and plasma carotenoid concentrations, over 4 weeks. A single-blind randomized controlled crossover trial from October 2013 to March 2014. Thirty women were randomized to receive 7 daily servings of HCFV or LCFV for 4 weeks. Following a 2-week washout period they followed the alternate intervention. Skin color (Commission Internationale de l'Eclairage L*a*b* color space, where L* represents skin lightness and positive values of a* and b* represent degrees of redness and yellowness, respectively) was assessed by reflectance spectroscopy in both sun-exposed and nonexposed skin areas. Fasting plasma carotenoids were determined by high-performance liquid chromatography, before and after each intervention period. Linear mixed models were used to determine the HCFV and LCFV response on skin color and plasma carotenoids, adjusting for intervention order, time, and interaction between baseline differences and time. There were no significant differences in mean daily fruit (P=0.42) and vegetable (P=0.17) intakes between HCFV and LCFV groups. Dietary alpha carotene, beta carotene, lutein, and beta cryptoxanthin intakes were significantly different between the two groups (P<0.01). Following HCFV there was a significantly greater increase in skin yellowness (b*) in both sun-exposed (P<0.001) and unexposed areas, (P<0.001), with no change in skin lightness (L*) or redness (a*). Significantly higher plasma alpha carotene (P=0.004), beta carotene (P=0.001), and lutein (P=0.028) concentrations were found following the HCFV intervention. Skin yellowness correlated with alpha carotene and beta carotene. Skin yellowness (b*) and fasting plasma carotenoid concentrations were significantly higher following HCFV than LCFV over 4 weeks. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Theoretical performance of liquid hydrogen and liquid fluorine as a rocket propellant

NASA Technical Reports Server (NTRS)

Gordon, Sanford; Huff, Vearl N

1953-01-01

Theoretical values of performance parameters for liquid hydrogen and liquid fluorine as a rocket propellant were calculated on the assumption of equilibrium composition during the expansion process for a wide range of fuel-oxidant and expansion ratios. The parameters included were specific impulse, combustion-chamber temperature, nozzle-exit temperature, equilibrium composition, mean molecular weight, characteristic velocity, coefficient of thrust, ration of nozzle-exit area to throat area, specific heat at constant pressure, coefficient of viscosity, and coefficient of thermal conductivity. The maximum value of specific impulse was 364.6 pound-seconds per pound for a chamber pressure of 300 pounds per square inch absolute (20.41 atm) and an exit pressure of 1 atmosphere.

Theoretical performance of liquid ammonia and liquid fluorine as a rocket propellant

NASA Technical Reports Server (NTRS)

Gordon, Sanford; Huff, Vearl N

1953-01-01

Theoretical values of performance parameters for liquid ammonia and liquid fluorine as a rocket propellant were calculated on the assumption of equilibrium composition during the expansion process for a wide range of fuel-oxidant and expansion ratios. The parameters included were specific impulse, combustion chamber temperature, nozzle-exit temperature, equilibrium composition, mean molecular weight, characteristic velocity, coefficient of thrust, ratio of nozzle-exit area to throat area, specific heat at constant pressure, coefficient of viscosity, and coefficient of thermal conductivity. The maximum value of specific impulse was 311.5 pound-seconds per pound for a chamber pressure of 300 pounds per square inch absolute (20.41 atm) and an exit pressure of 1 atmosphere.

Influence of liquid surface area on hydrogen sulfide oxidation during micro-aeration in dairy manure digesters

USDA-ARS?s Scientific Manuscript database

The specific objectives of this study were to evaluate headspace aeration for reducing hydrogen sulfide levels in low cost plug flow digesters, and to characterize the relationship between the liquid surface area and hydrogen sulfide oxidation rates. Experiments with replicate field scale plug flow ...

Assessing the detectability of antioxidants in two-dimensional high-performance liquid chromatography.

PubMed

Bassanese, Danielle N; Conlan, Xavier A; Barnett, Neil W; Stevenson, Paul G

2015-05-01

This paper explores the analytical figures of merit of two-dimensional high-performance liquid chromatography for the separation of antioxidant standards. The cumulative two-dimensional high-performance liquid chromatography peak area was calculated for 11 antioxidants by two different methods--the areas reported by the control software and by fitting the data with a Gaussian model; these methods were evaluated for precision and sensitivity. Both methods demonstrated excellent precision in regards to retention time in the second dimension (%RSD below 1.16%) and cumulative second dimension peak area (%RSD below 3.73% from the instrument software and 5.87% for the Gaussian method). Combining areas reported by the high-performance liquid chromatographic control software displayed superior limits of detection, in the order of 1 × 10(-6) M, almost an order of magnitude lower than the Gaussian method for some analytes. The introduction of the countergradient eliminated the strong solvent mismatch between dimensions, leading to a much improved peak shape and better detection limits for quantification. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bernal's road to random packing and the structure of liquids

NASA Astrophysics Data System (ADS)

Finney, John L.

2013-11-01

Until the 1960s, liquids were generally regarded as either dense gases or disordered solids, and theoretical attempts at understanding their structures and properties were largely based on those concepts. Bernal, himself a crystallographer, was unhappy with either approach, preferring to regard simple liquids as 'homogeneous, coherent and essentially irregular assemblages of molecules containing no crystalline regions'. He set about realizing this conceptual model through a detailed examination of the structures and properties of random packings of spheres. In order to test the relevance of the model to real liquids, ways had to be found to realize and characterize random packings. This was at a time when computing was slow and in its infancy, so he and his collaborators set about building models in the laboratory, and examining aspects of their structures in order to characterize them in ways which would enable comparison with the properties of real liquids. Some of the imaginative - often time consuming and frustrating - routes followed are described, as well the comparisons made with the properties of simple liquids. With the increase of the power of computers in the 1960s, computational approaches became increasingly exploited in random packing studies. This enabled the use of packing concepts, and the tools developed to characterize them, in understanding systems as diverse as metallic glasses, crystal-liquid interfaces, protein structures, enzyme-substrate interactions and the distribution of galaxies, as well as their exploitation in, for example, oil extraction, understanding chromatographic separation columns, and packed beds in industrial processes.

Simultaneous Determination of Pyridoxine and Riboflavin in Energy Drinks by High-Performance Liquid Chromatography with Fluorescence Detection

ERIC Educational Resources Information Center

Martí-Andre´s, P.; Escuder-Gilabert, L.; Martín-Biosca, Y.; Sagrado, S.; Medina-Herna´ndez, M.J.

2015-01-01

Energy drinks, as familiar consumer products, have been widely used in laboratory courses to help promote student interest, as well as to connect lecture concepts with laboratory work. Energy drinks contain B vitamins: pyridoxine (vitamin B6) and riboflavin (vitamin B2) of which amounts are high enough to be of concern. In this work, a fast and…

Brazil Country Analysis Brief

EIA Publications

2015-01-01

In 2014, Brazil was the eighth-largest energy consumer in the world and the third-largest in the Americas, behind the United States and Canada, according to BP statistics. Total primary energy consumption in Brazil has nearly doubled in the past decade1 because of sustained economic growth. The largest share of Brazil's total energy consumption is oil and other liquid fuels, followed by hydroelectricity and natural gas

A&M. Hot liquid waste holding tanks. Camera faces southeast. Located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Hot liquid waste holding tanks. Camera faces southeast. Located in vicinity of TAN-616, hot liquid waste treatment plant. Date: November 13, 1953. INEEL negative no. 9159 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Determination of solid- and liquid-phase gastric emptying half times in cats by use of nuclear scintigraphy.

PubMed

Costello, M; Papasouliotis, K; Barr, F J; Gruffydd-Jones, T J; Caney, S M

1999-10-01

To use nuclear scintigraphy to establish a range of gastric emptying half times (t1/2) following a liquid or solid meal in nonsedated cats. 12 clinically normal 3-year-old domestic shorthair cats. A test meal of 75 g of scrambled eggs labeled with technetium Tc 99m tin colloid was fed to 10 of the cats, and solid-phase gastric emptying t1/2 were determined by use of nuclear scintigraphy. In a separate experiment, 8 of these cats plus an additional 2 cats were fed 18 ml (n = 5) or 36 ml (n = 5) of a nutrient liquid meal labeled with technetium Tc 99m pentetate. Liquid-phase gastric emptying t1/2 then were determined by use of scintigraphy. Solid-phase gastric emptying t1/2 were between 210 and 769 minutes (median, 330 minutes). Median liquid-phase gastric emptying t1/2 after ingestion of 18 or 36 ml of the test meal were 67 minutes (range, 60 to 96 minutes) and 117 minutes (range, 101 to 170 minutes), respectively. The median t1/2 determined for cats receiving 18 ml of the radiolabeled liquid was significantly less than that determined for cats receiving 36 ml of the test meal. The protocol was tolerated by nonsedated cats. Solid-phase gastric emptying t1/2 were prolonged, compared with liquid-phase t1/2, and a major factor governing the emptying rate of liquids was the volume consumed. Nuclear scintigraphy may prove useful in assessing gastric motility disorders in cats.

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Economically Depressed Areas Strand: Management. Module III-F-3: Marketing Practices in Relation to Low Income Clientele.

ERIC Educational Resources Information Center

California State Univ., Fresno. Dept. of Home Economics.

This competency-based preservice home economics teacher education module on marketing practices in relation to low income clientele is the third in a set of three modules on management in economically depressed areas (EDAs). (This set is part of a larger set of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking…

Review of in situ derivatization techniques for enhanced bioanalysis using liquid chromatography with mass spectrometry.

PubMed

Baghdady, Yehia Z; Schug, Kevin A

2016-01-01

Accurate and specific analysis of target molecules in complex biological matrices remains a significant challenge, especially when ultra-trace detection limits are required. Liquid chromatography with mass spectrometry is often the method of choice for bioanalysis. Conventional sample preparation and clean-up methods prior to the analysis of biological fluids such as liquid-liquid extraction, solid-phase extraction, or protein precipitation are time-consuming, tedious, and can negatively affect target recovery and detection sensitivity. An alternative or complementary strategy is the use of an off-line or on-line in situ derivatization technique. In situ derivatization can be incorporated to directly derivatize target analytes in their native biological matrices, without any prior sample clean-up methods, to substitute or even enhance the extraction and preconcentration efficiency of these traditional sample preparation methods. Designed appropriately, it can reduce the number of sample preparation steps necessary prior to analysis. Moreover, in situ derivatization can be used to enhance the performance of the developed liquid chromatography with mass spectrometry-based bioanalysis methods regarding stability, chromatographic separation, selectivity, and ionization efficiency. This review presents an overview of the commonly used in situ derivatization techniques coupled to liquid chromatography with mass spectrometry-based bioanalysis to guide and to stimulate future research. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Heat-driven liquid metal cooling device for the thermal management of a computer chip

NASA Astrophysics Data System (ADS)

Ma, Kun-Quan; Liu, Jing

2007-08-01

The tremendous heat generated in a computer chip or very large scale integrated circuit raises many challenging issues to be solved. Recently, liquid metal with a low melting point was established as the most conductive coolant for efficiently cooling the computer chip. Here, by making full use of the double merits of the liquid metal, i.e. superior heat transfer performance and electromagnetically drivable ability, we demonstrate for the first time the liquid-cooling concept for the thermal management of a computer chip using waste heat to power the thermoelectric generator (TEG) and thus the flow of the liquid metal. Such a device consumes no external net energy, which warrants it a self-supporting and completely silent liquid-cooling module. Experiments on devices driven by one or two stage TEGs indicate that a dramatic temperature drop on the simulating chip has been realized without the aid of any fans. The higher the heat load, the larger will be the temperature decrease caused by the cooling device. Further, the two TEGs will generate a larger current if a copper plate is sandwiched between them to enhance heat dissipation there. This new method is expected to be significant in future thermal management of a desk or notebook computer, where both efficient cooling and extremely low energy consumption are of major concern.

Dietary habits of a school population and implications for oral health.

PubMed

Llena Puy, C; Forner, L

2010-04-01

The study analyzes the consumption of cariogenic foods in a population of children between 6 and 10 years old. Transversal descriptive study on a sample of 369 children who first attended to the Department 9 Dentistry dental office of the Valencia Region Health Agency (Spain). A self-administered food consumption frequency questionnaire was used to evaluate how often the food on the list were consumed by the children. Sticky sugar-rich foods, sugared milk and dairy products, food containing starch and sugar, sugary liquids and food with semihydrolyzed starch were consumed by over 50% of the sample at main meals and between meals. The mean intake of all these food groups, was over five times a week. The older children ate more fruit and foods rich in semihydrolyzed starch at main meals. Sweetened medication significantly reduced with age. Sugar-free sweets were consumed by almost 60% of the sample. The study shows a high intake of food with cariogenic potential, in particular processed food with added sugar and food with semihydrolyzed starch consumed between meals. This situation indicates the need to include health education programs in our population focused to improve the dietary habits of children and teenagers.

Pilot monitoring study of ibuprofen in surface waters of north of Portugal.

PubMed

Paíga, Paula; Santos, Lúcia H M L M; Amorim, Célia G; Araújo, Alberto N; Montenegro, M Conceição B S M; Pena, Angelina; Delerue-Matos, Cristina

2013-04-01

Ibuprofen is amongst the most worldwide consumed pharmaceuticals. The present work presents the first data in the occurrence of ibuprofen in Portuguese surface waters, focusing in the north area of the country, which is one of the most densely populated areas of Portugal. Analysis of ibuprofen is based on pre-concentration of the analyte with solid phase extraction and subsequent determination with liquid chromatography coupled to fluorescence detection. A total of 42 water samples, including surface waters, landfill leachates, Wastewater Treatment Plant (WWTP), and hospital effluents, were analyzed in order to evaluate the occurrence of ibuprofen in the north of Portugal. In general, the highest concentrations were found in the river mouths and in the estuarine zone. The maximum concentrations found were 48,720 ng L(-1) in the landfill leachate, 3,868 ng L(-1) in hospital effluent, 616 ng L(-1) in WWTP effluent, and 723 ng L(-1) in surface waters (Lima river). Environmental risk assessment was evaluated and at the measured concentrations only landfill leachates reveal potential ecotoxicological risk for aquatic organisms. Owing to a high consumption rate of ibuprofen among Portuguese population, as prescribed and non-prescribed medicine, the importance of hospitals, WWTPs, and landfills as sources of entrance of pharmaceuticals in the environment was pointed out. Landfill leachates showed the highest contribution for ibuprofen mass loading into surface waters. On the basis of our findings, more studies are needed as an attempt to assess more vulnerable areas.

Social media in health--what are the safety concerns for health consumers?

PubMed

Lau, Annie Y S; Gabarron, Elia; Fernandez-Luque, Luis; Armayones, Manuel

Recent literature has discussed the unintended consequences of clinical information technologies (IT) on patient safety, yet there has been little discussion about the safety concerns in the area of consumer health IT. This paper presents a range of safety concerns for consumers in social media, with a case study on YouTube. We conducted a scan of abstracts on 'quality criteria' related to YouTube. Five areas regarding the safety of YouTube for consumers were identified: (a) harmful health material targeted at consumers (such as inappropriate marketing of tobacco or direct-to-consumer drug advertising); (b) public display of unhealthy behaviour (such as people displaying self-injury behaviours or hurting others); (c) tainted public health messages (i.e. the rise of negative voices against public health messages); (d) psychological impact from accessing inappropriate, offensive or biased social media content; and (e) using social media to distort policy and research funding agendas. The examples presented should contribute to a better understanding about how to promote a safe consumption and production of social media for consumers, and an evidence-based approach to designing social media interventions for health. The potential harm associated with the use of unsafe social media content on the Internet is a major concern. More empirical and theoretical studies are needed to examine how social media influences consumer health decisions, behaviours and outcomes, and devise ways to deter the dissemination of harmful influences in social media.

Maximal liquid bridges between horizontal cylinders

NASA Astrophysics Data System (ADS)

Cooray, Himantha; Huppert, Herbert E.; Neufeld, Jerome A.

2016-08-01

We investigate two-dimensional liquid bridges trapped between pairs of identical horizontal cylinders. The cylinders support forces owing to surface tension and hydrostatic pressure that balance the weight of the liquid. The shape of the liquid bridge is determined by analytically solving the nonlinear Laplace-Young equation. Parameters that maximize the trapping capacity (defined as the cross-sectional area of the liquid bridge) are then determined. The results show that these parameters can be approximated with simple relationships when the radius of the cylinders is small compared with the capillary length. For such small cylinders, liquid bridges with the largest cross-sectional area occur when the centre-to-centre distance between the cylinders is approximately twice the capillary length. The maximum trapping capacity for a pair of cylinders at a given separation is linearly related to the separation when it is small compared with the capillary length. The meniscus slope angle of the largest liquid bridge produced in this regime is also a linear function of the separation. We additionally derive approximate solutions for the profile of a liquid bridge, using the linearized Laplace-Young equation. These solutions analytically verify the above-mentioned relationships obtained for the maximization of the trapping capacity.

Food in Relation to Sustainable Development Expressed in Swedish Syllabuses of Home and Consumer Studies: At Present and Past

ERIC Educational Resources Information Center

Gisslevik, Emmalee; Wernersson, Inga; Åberg, Helena; Larsson, Christel

2016-01-01

Little is known what the term sustainable development entails in relation to the school subject of home and consumer studies and the subject's knowledge area of food. The aim is to illustrate how food is expressed in national syllabuses of home and consumer studies at present and in the past, and its operationalization into sustainable…

Learning with Pictures, Signs and Symbols (A Language Arts and Consumer Mathematics Curriculum for the 0-4 Level ABE Student). Final Report.

ERIC Educational Resources Information Center

Robinson, Nancy; Selkirk, Betty

The ARIN Adult Learning Center in Indiana, Pennsylvania conducted a project to develop language arts and consumer mathematics curriculums for O-4 level adult basic education (ABE) students. Using the five knowledge areas of the adult performance levels as established by the University of Texas, (consumer economics, health, occupational knowledge,…

Exploration of functional food consumption in older adults in relation to food matrices, bioactive ingredients, and health.

PubMed

Vella, Meagan N; Stratton, Laura M; Sheeshka, Judy; Duncan, Alison M

2013-01-01

The functional food industry is expanding, yet research into consumer perceptions of functional foods is limited. Older adults could benefit from functional foods due to age-related food and health issues. This research gathered information about functional foods from community-dwelling older adults (n = 200) who completed a researcher-administered questionnaire about consumption, food matrices, bioactive ingredients, and health areas addressed through functional foods. Overall prevalence of functional food consumption was found to be 93.0%. Commonly consumed foods included yogurt with probiotics (56.0%), eggs with omega-3 fatty acids (37.0%), and bread with fiber (35.5%). Functional food matrices primarily consumed were yogurt (51.5%), bread (44.0%), and cereal (40.0%). The primary functional food bioactive consumed was dietary fiber (79.5%). Most participants (86.2%) indicated that they consume functional foods to improve health, and the major areas specified were osteoporosis/bone health (67.5%), heart disease (61.0%), and arthritis (55.0%). These results inform health professionals regarding the potential of functional foods to support health among older adults.

Consumer and Commercial Products, Group IV: Control Techniques Guidelines in Lieu of Regulations

EPA Pesticide Factsheets

EPA has determined that control techniques guidelines (CTGs) will be substantially as effective as regulations in reducing volatile organic compound (VOC) emissions in ozone nonattainment areas for certain consumer and commercial product categories.

NANOMATERIALS, NANOTECHNOLOGY: APPLICATIONS, CONSUMER PRODUCTS, AND BENEFITS

EPA Science Inventory

Nanotechnology is a platform technology that is finding more and more applications daily. Today over 600 consumer products are available globally that utilize nanomaterials. This chapter explores the use of nanomaterials and nanotechnology in three areas, namely Medicine, Environ...

[Analysis of color gamut of LCD system based on LED backlight with area-controlling technique].

PubMed

Li, Fu-Wen; Jin, Wei-Qi; Shao, Xi-Bin; Zhang, Li-Lei; Wan, Li-Fang

2010-05-01

Color gamut as a significant performance index for display system describes the color reproduction ability IN real scenes. Liquid crystal display (LCD) is the most popular technology in flat panel display. However, conventional cold cathode fluorescent lamp (CCFL) backlight of LCD can not behave high color gamut compared with cathode ray tube (CRT). The common used method of color gamut measuring for LCD system is introduced at the beginning. According to the inner structure and display principle of LCD system, there are three major factors deciding LCD's color gamut: spectral properties of backlight, transmittance properties of color filters and performance of liquid crystal panel. Instead of conventional backlight CCFL, RGB-LED backlight is used for improving color reproduction of LCD display system. Due to the imperfect match between RGB-LED' s spectra and color filter's transmittance, the color filter would reduce the color gamut of LCD system more or less. Therefore, LCD system based on LED backlight with area-control technique is introduced which modifies backlight control signal according to the input signal After analyzing and calculating the spectra of LED backlight which passes through the color filters using method of colorimetry, the area sizes of color gamut triangles of RGB-LED backlight with area-control and RGB-LED backlight without area-control LCD systems are compared and the relationship between color gamut and varying contrast of liquid crystal panel is analyzed. It is indicated that LED backlight with area-control technique can avoid color saturation dropping and have little effects on the contrast variation of liquid crystal panel. In other words, LED backlight with area-control technique relaxes the requirements of both color filter performance and liquid crystal panel. Thus, it is of importance to improve the color gamut of the current LCD system with area-control LED backlight.

Characterizations of milkfish (Chanos chanos) meatballs as effect of nanoencapsulation liquid smoke addition

NASA Astrophysics Data System (ADS)

Swastawati, Fronthea; Ambaryanto; Cahyono, Bambang; Wijayanti, Ima; Chilmawati, Diana

2018-02-01

Milkfish meatballs are one of the value-added product that is potential to be developed because this product is favored by consumers. The aims of this study were mainly to evaluate the effect of nano encapsulation liquid smoke addition to the properties of milkfish meatballs. The different concentration (0%, 1%, 3% and 5%) of nano encapsulation liquid smoke was treated into milkfish meatballs with three replications. Test parameters used include texture (hardness, deformation and gel strength); proximate (moisture, protein, fat, ash and carbohydrates content); sensory (organoleptic and hedonic). Parametric data were analysis using ANOVA and non-parametric parameters using Kruskal Wallis test. Analysis of variant shows that nanoencapsulation gave significant effect on the hardness, deformation, and gel strength; protein, lipid, ash and water content(P<0,05), but gave no significant effect on carbohydrate (P >0.05). The best texture characteristic was obtained by milkfish meatball added with 1% of nanoencapsulation liquid smoke indicated by the moisture water; protein; fat; ash and carbohydrate content: 66,35%; 12,69%; 6,75%; 2,42% and 5,93% respectively. The best organoleptic and hedonic value of milkfish meatballs was achieved by a panelist at the sample with the addition of 1% liquid smoke, but this sample found gave no significance different to control in terms of sensory valle.

Radioactive liquid wastes discharged to ground in the 200 Areas during 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, J. D.; Poremba, B. E.

1979-03-26

This document is issued quarterly for the purpose of summarizing the radioactive liquid wastes that have been discharged to the ground in the 200 Areas. In addition to data for 1978, cumulative data since plant startup are presented. Also, in this document is a listing of decayed activity to the various plant sites.

Unveiling health attitudes and creating good-for-you foods: the genomics metaphor, consumer innovative web-based technologies.

PubMed

Moskowitz, H R; German, J B; Saguy, I S

2005-01-01

This article presents an integrated analysis of three emerging knowledge bases in the nutrition and consumer products industries, and how they may effect the food industry. These knowledge bases produce new vistas for corporate product development, especially with respect to those foods that are positioned as 'good for you.' Couched within the current thinking of state-of-the-art knowledge and information, this article highlights how today's thinking about accelerated product development can be introduced into the food and health industries to complement these three research areas. The 3 knowledge bases are: the genomics revolution, which has opened new insights into understanding the interactions of personal needs of individual consumers with nutritionally relevant components of the foods; the investigation of food choice by scientific studies; the development of large scale databases (mega-studies) about the consumer mind. These knowledge bases, combined with new methods to understand the consumer through research, make possible a more focused development. The confluence of trends outlined in this article provides the corporation with the beginnings of a new path to a knowledge-based, principles-grounded product-development system. The approaches hold the potential to create foods based upon people's nutritional requirements combined with their individual preferences. Integrating these emerging knowledge areas with new consumer research techniques may well reshape how the food industry develops new products to satisfy consumer needs and wants.

Consumers' views of direct-to-consumer genetic information.

PubMed

McBride, Colleen M; Wade, Christopher H; Kaphingst, Kimberly A

2010-01-01

In this report, we describe the evolution and types of genetic information provided directly to consumers, discuss potential advantages and disadvantages of these products, and review research evaluating consumer responses to direct-to-consumer (DTC) genetic testing. The available evidence to date has focused on predictive tests and does not suggest that individuals, health care providers, or health care systems have been harmed by a DTC provision of genetic information. An understanding of consumer responses to susceptibility tests has lagged behind. The Multiplex Initiative is presented as a case study of research to understand consumers' responses to DTC susceptibility tests. Three priority areas are recommended for accelerated research activities to inform public policy regarding DTC genetic information: (a) exploring consumer's long-term responses to DTC genetic testing on a comprehensive set of outcomes, (b) evaluating optimal services to support decision making about genetic testing, and (c) evaluating best practices in promoting genetic competencies among health providers.

Design of capacity incentive and energy compensation for demand response programs

NASA Astrophysics Data System (ADS)

Liu, Zhoubin; Cui, Wenqi; Shen, Ran; Hu, Yishuang; Wu, Hui; Ye, Chengjin

2018-02-01

Variability and Uncertainties caused by renewable energy sources have called for large amount of balancing services. Demand side resources (DSRs) can be a good alternative of traditional generating units to provide balancing service. In the areas where the electricity market has not been fully established, e.g., China, DSRs can help balance the power system with incentive-based demand response programs. However, there is a lack of information about the interruption cost of consumers in these areas, making it hard to determine the rational amount of capacity incentive and energy compensation for the participants of demand response programs. This paper proposes an algorithm to calculate the amount of capacity incentive and energy compensation for demand response programs when there lacks the information about interruption cost. Available statistical information of interruption cost in referenced areas is selected as the referenced data. Interruption cost of the targeted area is converted from the referenced area by product per electricity consumption. On this basis, capacity incentive and energy compensation are obtained to minimize the payment to consumers. Moreover, the loss of consumers is guaranteed to be covered by the revenue they earned from load serving entities.

Study on Gas-liquid Falling Film Flow in Internal Heat Integrated Distillation Column

NASA Astrophysics Data System (ADS)

Liu, Chong

2017-10-01

Gas-liquid internally heat integrated distillation column falling film flow with nonlinear characteristics, study on gas liquid falling film flow regulation control law, can reduce emissions of the distillation column, and it can improve the quality of products. According to the distribution of gas-liquid mass balance internally heat integrated distillation column independent region, distribution model of heat transfer coefficient of building internal heat integrated distillation tower is obtained liquid distillation falling film flow in the saturated vapour pressure of liquid water balance, using heat transfer equation and energy equation to balance the relationship between the circulating iterative gas-liquid falling film flow area, flow parameter information, at a given temperature, pressure conditions, gas-liquid flow falling film theory makes the optimal parameters to achieve the best fitting value with the measured values. The results show that the geometric gas-liquid internally heat integrated distillation column falling film flow heat exchange area and import column thermostat, the average temperature has significant. The positive correlation between the heat exchanger tube entrance due to temperature difference between inside and outside, the heat flux is larger, with the increase of internal heat integrated distillation column temperature, the slope decreases its temperature rise, which accurately describes the internal gas-liquid heat integrated distillation tower falling film flow regularity, take appropriate measures to promote the enhancement of heat transfer. It can enhance the overall efficiency of the heat exchanger.

Theoretical Performance of Liquid Hydrogen with Liquid Oxygen as a Rocket Propellant

NASA Technical Reports Server (NTRS)

Gordon, Sanford; McBride, Bonnie J.

1959-01-01

Theoretical rocket performance for both equilibrium and frozen composition during expansion was calculated for the propellant combination liquid hydrogen and liquid oxygen at four chamber pressures (60, 150, 300, and 600 lb/sq in. abs) and a wide range of pressure ratios (1 to 4000) and oxidant-fuel ratios (1.190 to 39.683). Data are given to estimate performance parameters at chamber pressures other than those for which data are tabulated. The parameters included are specific impulse, specific impulse in vacuum, combustion-chamber temperature, nozzle-exit temperature, molecular weight, molecular-weight derivatives, characteristic velocity, coefficient of thrust, ratio of nozzle-exit area to throat area, specific heat at constant pressure, isentropic exponent, viscosity, thermal conductivity, Mach number, and equilibrium gas compositions.

Large Area Microencapsulated Reflective Guest-Host Liquid Crystal Displays and Their Applications

NASA Astrophysics Data System (ADS)

Nakai, Yutaka; Tanaka, Masao; Enomoto, Shintaro; Iwanaga, Hiroki; Hotta, Aira; Kobayashi, Hitoshi; Oka, Toshiyuki; Kizaki, Yukio; Kidzu, Yuko; Naito, Katsuyuki

2002-07-01

We have developed reflective liquid crystal displays using microencapsulated guest-host liquid crystals, whose size was sufficiently large for viewing documents. A high-brightness image can be realized because there is no need for polarizers. Easy fabrication processes, consisting of screen-printing of microencapsulated liquid crystal and film adhesion, have enabled the realization of thinner and lighter cell structures. It has been confirmed that the display is tolerant of the pressures to which it would be subject in actual use. The optimization of fabrication processes has enabled the realization of reflectance uniformity in the display area and reduction of the driving voltage. Our developed display is suitable for portable information systems, such as electronic book applications.

49 CFR 176.315 - Fire protection requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Detailed Requirements for Class 3 (Flammable) and Combustible Liquid Materials § 176.315 Fire protection... (flammable) or combustible liquid for which it is required. Each fire extinguisher must be accessible to the... (flammable) and combustible liquids stowage areas must be fitted with an approved combination solid stream...

Optimization of liquid scintillation measurements applied to smears and aqueous samples collected in industrial environments

NASA Astrophysics Data System (ADS)

Chapon, Arnaud; Pigrée, Gilbert; Putmans, Valérie; Rogel, Gwendal

Search for low-energy β contaminations in industrial environments requires using Liquid Scintillation Counting. This indirect measurement method supposes a fine control from sampling to measurement itself. Thus, in this paper, we focus on the definition of a measurement method, as generic as possible, for both smears and aqueous samples' characterization. That includes choice of consumables, sampling methods, optimization of counting parameters and definition of energy windows, using the maximization of a Figure of Merit. Detection limits are then calculated considering these optimized parameters. For this purpose, we used PerkinElmer Tri-Carb counters. Nevertheless, except those relative to some parameters specific to PerkinElmer, most of the results presented here can be extended to other counters.

Liquid hydrogen production and commercial demand in the United States

NASA Technical Reports Server (NTRS)

Heydorn, Barbara

1990-01-01

Kennedy Space Center, the single largest purchaser of liquid hydrogen (LH2) in the United States, evaluated current and anticipated hydrogen production and consumption in the government and commercial sectors. Specific objectives of the study are as follows: (1) identify LH2 producers in the United States and Canada during 1980-1989 period; (2) compile information in expected changes in LH2 production capabilities over the 1990-2000 period; (3) describe how hydrogen is used in each consuming industry and estimate U.S. LH2 consumption for the chemicals, metals, electronics, fats and oil, and glass industries, and report data on a regional basis; (4) estimate historical and future consumption; and (5) assess the influence of international demands on U.S. plants.

Capillary condenser/evaporator

NASA Technical Reports Server (NTRS)

Valenzuela, Javier A. (Inventor)

2010-01-01

A heat transfer device is disclosed for transferring heat to or from a fluid that is undergoing a phase change. The heat transfer device includes a liquid-vapor manifold in fluid communication with a capillary structure thermally connected to a heat transfer interface, all of which are disposed in a housing to contain the vapor. The liquid-vapor manifold transports liquid in a first direction and conducts vapor in a second, opposite direction. The manifold provides a distributed supply of fluid (vapor or liquid) over the surface of the capillary structure. In one embodiment, the manifold has a fractal structure including one or more layers, each layer having one or more conduits for transporting liquid and one or more openings for conducting vapor. Adjacent layers have an increasing number of openings with decreasing area, and an increasing number of conduits with decreasing cross-sectional area, moving in a direction toward the capillary structure.

Identity theft and consumers' reaction to preventive technological innovations.

PubMed

Ainscough, Thomas L; Brody, Richard G; Trocchia, Philip J

2007-08-01

The use of identification technology by commercial entities has broad and, for some consumers, disturbing social implications. This two-phase study was done to specify consumers' concerns regarding various identification technologies which may be encountered in retail environments. From the qualitative findings, a 26-item survey was constructed to quantify identified areas of concern with 303 survey participants (147 women and 156 men), whose mean age category was 30 to 39 years. Using exploratory factor analysis (principal components with varimax rotation), five dimensions of consumers' concern emerged: privacy, ethics, health, humanity, and complexity.

The gas fluxing of aluminum: Mathematical modeling and experimental investigations

NASA Astrophysics Data System (ADS)

Fjeld, Autumn Marie

Chlorine fluxing is an essential purification step in aluminum refining in which impurities such as Ca, Na, Li, and Mg are removed by bubbling a mixture of chlorine and argon gas through molten aluminum. The gas is injected into the fluxing vessel through a rotating shaft and impeller which simultaneously agitates the melt, while breaking up and dispersing gas bubbles through the liquid phase. The efficiency of impurity removal and control of toxic chlorine and chloride emissions are dependent upon the extent of gas dispersion or mixing, residence time of the bubbles, and surface area of the bubbles. Clearly the gas injection and distribution within the liquid metal cannot be directly observed and such operations are often poorly controlled and not well understood. Problems arise when the injection gas, i.e. chlorine, is not completely consumed by reaction with impurities and the excess is reported as emissions of chlorides such as toxic HCl. The intention is to improve the technology to eliminate this waste (saving on the energy entailed in the chlorine production and reducing pollution) by better dispersion of the injected gas throughout the metal. Previous experimental investigations using a capacitance probe, capable of immersion in liquid aluminum for several hours, have been carried out to detect bubbles in an industrial fluxing unit at the Alcoa Technical Center. Bubble frequency data have shown the bubbles to be fairly well dispersed in the areas of the fluxing unit, decreasing in observed bubble frequency with increasing distance from the impeller (source of gas injection). To gain further insight and add to our experimental findings, two computational models have been developed to simulate the complex two-phase fluid dynamics of a rotary gas injection system. The results of these two modeling approaches are presented and analyzed and compared to experimental bubble measurements gathered using the capacitance probe. Bubble size distributions and residence times from the discrete phase model were incorporated in an external demagging reaction model to predict chlorine utilization efficiency. This simplified model included several assumptions regarding the kinetics and reaction path, however the model showed reasonable agreement to prior experimental magnesium removal data and provides valuable information related to the interplay of reaction progress in a fluxing unit and the fluid dynamics, in terms of bubble size, trajectory and resulting bubble residence time.

Using Kokkos for Performant Cross-Platform Acceleration of Liquid Rocket Simulations

DTIC Science & Technology

2017-05-08

NUMBER (Include area code) 08 May 2017 Briefing Charts 05 April 2017 - 08 May 2017 Using Kokkos for Performant Cross-Platform Acceleration of Liquid ...ERC Incorporated RQRC AFRL-West Using Kokkos for Performant Cross-Platform Acceleration of Liquid Rocket Simulations 2DISTRIBUTION A: Approved for... Liquid Rocket Combustion Simulation SPACE simulation of rotating detonation engine (courtesy of Dr. Christopher Lietz) 3DISTRIBUTION A: Approved

State-resolved Thermal/Hyperthermal Dynamics of Atmospheric Species

DTIC Science & Technology

2015-06-23

gas -room temperature ionic liquid (RTIL) interfaces. 2) Large scale trajectory simulations for theoretical analysis of gas - liquid scattering studies...areas: 1) Diode laser and LIF studies of hyperthermal CO2 and NO collisions at the gas -room temperature ionic liquid (RTIL) interfaces. 2) Large...scale trajectory simulations for theoretical analysis of gas - liquid scattering studies, 3) LIF data for state-resolved scattering of hyperthermal NO at

Consumer-driven health care: tangible employer actions.

PubMed

Beauregard, Thomas R

2004-01-01

In response to double-digit health care cost increases, leading employers are aiming aggressive strategies at changing participant and provider behaviors--strategies that go well beyond the narrow idea of a new cost-sharing design. This article describes the elements of a comprehensive consumer-driven health care strategy and provides examples of tangible consumer-driven health care initiatives in the areas of design, pricing, contracting, support and public policy.

California Community College Family and Consumer Sciences Program Plan, 1996. Including: Directory of Professional and Trade Organizations, Directory of Family and Consumer Sciences and Related Program Areas and Program Coordinators.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. Office of the Chancellor.

Intended as a resource for California community colleges and districts in assessing and improving family and consumer science (FCS) programs, this program plan provides information on current trends affecting the delivery of FCS programs and guidelines for assessing and developing new comprehensive or specialized programs. Following letters of…

What People Will Need to Know in the 80s and Beyond to Be Intelligent Consumers and Effective Homemakers (Content for Consumer and Homemaking Education).

ERIC Educational Resources Information Center

Simpson, Elizabeth J.

This report examines matters about which people will need to be knowledgeable in the 1980s to be intelligent consumers and effective homemakers. Its assumptions are based on an examination of work in the field of home economics and related areas of future issues relative to families, publications dealing with social trends and technological…

Long-term temporal and spatial dynamics of food availability for endangered mountain gorillas in Volcanoes National Park, Rwanda.

PubMed

Grueter, Cyril C; Ndamiyabo, Ferdinand; Plumptre, Andrew J; Abavandimwe, Didier; Mundry, Roger; Fawcett, Katie A; Robbins, Martha M

2013-03-01

Monitoring temporal and spatial changes in the resource availability of endangered species contributes to their conservation. The number of critically endangered mountain gorillas (Gorilla beringei beringei) in the Virunga Volcano population has doubled over the past three decades, but no studies have examined how food availability has changed during that period. First, we assessed if the plant species consumed by the gorillas have changed in abundance and distribution during the past two decades. In 2009-2010, we replicated a study conducted in 1988-1989 by measuring the frequency, density, and biomass of plant species consumed by the gorillas in 496 plots (ca. 6 km(2)) in the Karisoke study area in Volcanoes National Park, Rwanda. We expected to observe a decreased presence of major gorilla food plants as a likely result of density-dependent overharvesting by gorillas. Among the five most frequently consumed species (composing approximately 70% of the gorilla's diet, excluding bamboo), two have decreased in availability and abundance, while three have increased. Some species have undergone shifts in their altitudinal distribution, possibly due to regional climatic changes. Second, we made baseline measurements of food availability in a larger area currently utilized by the gorillas. In the extended sampling (n = 473 plots) area (ca. 25 km(2) ), of the five most frequently consumed species, two were not significantly different in frequency from the re-sampled area, while two occurred significantly less frequently, and one occurred significantly more frequently. We discuss the potential impact of gorilla-induced herbivory on changes of vegetation abundance. The changes in the species most commonly consumed by the gorillas could affect their nutrient intake and stresses the importance of monitoring the interrelation among plant population dynamics, species density, and resource use. © 2012 Wiley Periodicals, Inc.

Unattended Radiation Sensor Systems for Remote Terrestrial Applications and Nuclear Nonproliferation

DTIC Science & Technology

2002-01-01

liquid nitrogen is not available, or frequent attention is inconvenient and time-consuming. The “box” section contains a Stirling engine cryocooler and...sponsorship of the Defense Threat Reduction Agency (DTRA). The first is a system consisting of a mechanical cryocooler coupled with a high-purity...amplifier, a multichannel analyzer, and gated integrator electronics to process the slow signal pulses generated by room temperature solid state detectors

Wiseman conducts BCAT-C1 experiment

NASA Image and Video Library

2014-07-25

ISS040-E-076505 (25 July 2014) --- NASA astronaut Reid Wiseman, Expedition 40 flight engineer, conducts a session with the Binary Colloidal Alloy Test-C1, or BCAT-C1, experiment in the Kibo laboratory of the International Space Station. Results from this ongoing investigation of colloids ? mixtures of small particles distributed throughout a liquid ? will help materials scientists to develop new consumer products with unique properties and longer shelf lives.

Wiseman conducts BCAT-C1 experiment

NASA Image and Video Library

2014-07-25

ISS040-E-076510 (25 July 2014) --- NASA astronaut Reid Wiseman, Expedition 40 flight engineer, conducts a session with the Binary Colloidal Alloy Test-C1, or BCAT-C1, experiment in the Kibo laboratory of the International Space Station. Results from this ongoing investigation of colloids ? mixtures of small particles distributed throughout a liquid ? will help materials scientists to develop new consumer products with unique properties and longer shelf lives.

Wiseman conducts BCAT-C1 experiment

NASA Image and Video Library

2014-07-25

ISS040-E-076507 (25 July 2014) --- NASA astronaut Reid Wiseman, Expedition 40 flight engineer, conducts a session with the Binary Colloidal Alloy Test-C1, or BCAT-C1, experiment in the Kibo laboratory of the International Space Station. Results from this ongoing investigation of colloids ? mixtures of small particles distributed throughout a liquid ? will help materials scientists to develop new consumer products with unique properties and longer shelf lives.

Development of an Acetate- or Sugar-fed Microbial Power Generator for Military Bases

DTIC Science & Technology

2012-07-01

the U.S. military, which consumes 395,000 barrels of oil every day (Warner and Singer, 2009). Transport of fossil fuels to remote places in hostile... sOy ^ % (19%) ****** SP.(6%\\ ’ Soehngenia saccharolytica Geobocter sp. (14%) 11%) ^^ ^ Citrobacter 0</ £ -. sp...performance liquid chromatography (HPLC) equipped with BIORAD Aminex HPX-87H column for sugars and volatile acids analysis. Sucrose analysis employed water

Development of Instrumentation for Boundary Layer Transition Detection

DTIC Science & Technology

1991-01-01

assistance of Maj. Aaron Byerley were largely responsible for my decision to stay on. 4t Contents Abstract Acknowledgements Nomenclature Chapter 1...The use of shr sensitive liquid crystals in aerodynamic measurements has been a mor wPu imovation. Two different prcesses can be employed to...transition location. The steady-state heat transfer technique is unsuited for use on complex geometries, may be time consuming , and has an element of

Exposure factors for cleaning, automotive care, and surface protection products for exposure assessments.

PubMed

Park, Ji Young; Lim, Miyoung; Yang, Wonho; Lee, Kiyoung

2017-01-01

Accurately measuring the usage patterns of consumer products (CPs) is important to conduct realistic exposure assessments. We determined the exposure factors for 18 consumer products: household bleach, mold stain remover, all-purpose cleaner, washing machine cleaner, air conditioner cleaner, glass cleaner, drain cleaner, adhesive remover, liquid snow chain, tire shine spray, wheel cleaner, rain repellent, car wax spray, leather polish, furniture polish, anti-fog product, fabric waterproofing spray, and rust inhibitor. Field survey staff visited homes and collected product use information via face-to-face interviews. In total, 10,000 participants (5010 men and 4990 women) aged 15 years and older completed the questionnaire. Household bleach had the highest use rate of 47.4% and use rates for the other products ranged from 0.8 to 21.7%. The use rates of many CPs differed by age group and gender. Many household cleaning products were used regularly, but some products, such as air conditioner cleaner and liquid snow chain, were used in specific seasons or for specific purposes; therefore, they were used less frequently compared to cleaning products. These exposure factor data will be useful as input data for exposure and risk assessments and setting safety guidelines. Copyright © 2016 Elsevier Ltd. All rights reserved.

Plant protein in milk replacers for rearing buffalo calves. II. Effect of replacing 75% of the milk proteins by plant proteins on the preweaning performance of buffalo calves.

PubMed

el-Ashry, M A; el-Serafy, A M; Zaki, A A

1988-01-01

In an experiment, 9 female and 6 male buffalo calves at the age of 3 to 4 weeks were divided into 3 groups. The animals were given milk replacers in which 75% of the dried skim milk protein had been replaced by American soybean flour (ASP), Egyptian soya meal (ESP), or corn glutine (GP). Scouring occurred in all groups during the first 3 weeks of the experiment, continuing up to the fourth week in groups ESP and GP. In groups ESP and GP one calf each died. During the first 3 weeks of the experiment, the calves consumed on average 747, 631, 787 g dry matter (DM) as liquids. They achieved live weight gains of 314, 83, -286 g/d, with significant differences between the groups. The digestibility of the crude protein was 73, 74, 70%. During the second period--up to 70 or 62.5 kg live body weight--only groups ASP and ESP were investigated. The calves consumed 1.64 or 1.66 kg DM/d as liquid and dry feedstuff. The average daily weight gain was 3.87 or 3.50 TDN/kg ADG. During this period, the crude protein was digested by 76 or 73%.

Space Shuttle Projects

NASA Image and Video Library

1983-07-01

This photograph was taken during the final assembly phase of the Space Shuttle light weight external tanks (LWT) 5, 6, and 7 at the Michoud Assembly Facility in New Orleans, Louisiana. The giant cylinder, higher than a 15-story building, with a length of 154-feet (47-meters) and a diameter of 27.5-feet (8.4-meters), is the largest single piece of the Space Shuttle. During launch, the external tank (ET) acts as a backbone for the orbiter and solid rocket boosters. In separate, internal pressurized tank sections, the ET holds the liquid hydrogen fuel and liquid oxygen oxidizer for the Shuttle's three main engines. During launch, the ET feeds the fuel under pressure through 17-inch (43.2-centimeter) ducts which branch off into smaller lines that feed directly into the main engines. Some 64,000 gallons (242,260 liters) of fuel are consumed by the main engines each minute. Machined from aluminum alloys, the Space Shuttle's ET is the only part of the launch vehicle that currently is not reused. After its 526,000 gallons (1,991,071 liters) of propellants are consumed during the first 8.5 minutes of flight, it is jettisoned from the orbiter and breaks up in the upper atmosphere, its pieces falling into remote ocean waters. The Marshall Space Flight Center was responsible for developing the ET

Space Shuttle Projects

NASA Image and Video Library

1989-03-01

This STS-29 mission onboard photo depicts the External Tank (ET) falling toward the ocean after separation from the Shuttle orbiter Discovery. The giant cylinder, higher than a 15-story building, with a length of 154-feet (47-meters) and a diameter of 27,5-feet (8.4-meters), is the largest single piece of the Space Shuttle. During launch, the ET also acts as a backbone for the orbiter and solid rocket boosters. In separate, internal pressurized tank sections, the ET holds the liquid hydrogen fuel and liquid oxygen oxidizer for the Shuttle's three main engines. During launch, the ET feeds the fuel under pressure through 17-inch (43.2-centimeter) ducts which branch off into smaller lines that feed directly into the main engines. Some 64,000 gallons (242,260 liters) of fuel are consumed by the main engines each minute. Machined from aluminum alloys, the Space Shuttle's ET is the only part of the launch vehicle that currently is not reused. After its 526,000 gallons (1,991,071 liters) of propellants are consumed during the first 8.5 minutes of flight, it is jettisoned from the orbiter and breaks up in the upper atmosphere, its pieces falling into remote ocean waters. The Marshall Space Flight Center was responsible for developing the ET.

Simultaneous determination of sodium saccharin, aspartame, acesulfame-K and sucralose in food consumed in Korea using high-performance liquid chromatography and evaporative light-scattering detection.

PubMed

Lee, Youngsun; Do, Byungkyung; Lee, Gunyoung; Lim, Ho Soo; Yun, Sang Soon; Kwon, Hoonjeong

2017-05-01

Four artificial sweeteners, i.e., sodium saccharin, aspartame, acesulfame-K and sucralose, are permitted for use in Korea, and recent regulatory changes have expanded the number of food categories in which they may be used. Four artificial sweeteners were determined simultaneously in more than 900 food items from 30 food categories that are commercially available in Korean markets, including both domestic and imported products, using high-performance liquid chromatography and evaporative light-scattering detection (ELSD). A new procedure using 75% acetone to remove fat was applied for sample preparation. The levels detected in all samples were below the maximum permitted use levels established in Korea. Despite the increased number of categories, the only one in which sodium saccharin was newly found was takju, an alcoholic beverage. Sodium saccharin was not found in other beverages in the food analysis or in the food label survey, even though its use was reported in a previous study, suggesting that consumer preference outweighs regulatory decisions. When the analytical results were combined with food-consumption data obtained from the Korea National Health and Nutrition Examination Survey 2010-14, the estimated daily intakes of all the sweeteners were considered safe.

46 CFR 153.932 - Goggles and protective clothing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety... or tight-fitting goggles for eye protection against splashing or spraying liquids if that person is...-fitting goggles for eye protection against splashing or spraying liquids if the person is: (1) In the area...

46 CFR 153.932 - Goggles and protective clothing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety... or tight-fitting goggles for eye protection against splashing or spraying liquids if that person is...-fitting goggles for eye protection against splashing or spraying liquids if the person is: (1) In the area...

46 CFR 153.932 - Goggles and protective clothing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety... or tight-fitting goggles for eye protection against splashing or spraying liquids if that person is...-fitting goggles for eye protection against splashing or spraying liquids if the person is: (1) In the area...

46 CFR 153.932 - Goggles and protective clothing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety... or tight-fitting goggles for eye protection against splashing or spraying liquids if that person is...-fitting goggles for eye protection against splashing or spraying liquids if the person is: (1) In the area...

46 CFR 153.932 - Goggles and protective clothing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations General Vessel Safety... or tight-fitting goggles for eye protection against splashing or spraying liquids if that person is...-fitting goggles for eye protection against splashing or spraying liquids if the person is: (1) In the area...

Review of Department of the Navy, Judge Advocate General’s Surface Ship Fire Investigation Reports for the Period 1980 through 1986

DTIC Science & Technology

1989-12-26

unauthorized storage (storage of material in a non-storage area), storage of a hazardous material in a storage area which was not designed for such a... hazard , e.g., storing flammable liquid in a non- sprinklered storeroom, and excessive amounts of material in a storage area. Applicable Reports: JAGs 6460...have been secured (locked) because of hazardous contents (e.g., flammable liquids, ordnance)but were not for various reasons presented an opportunity for

Vapors-liquid phase separator. [infrared telescope heat sink

NASA Technical Reports Server (NTRS)

Frederking, T. H. K.; Brown, G. S.; Chuang, C.; Kamioka, Y.; Kim, Y. I.; Lee, J. M.; Yuan, S. W. K.

1980-01-01

The use of porous plugs, mostly with in the form of passive devices with constant area were considered as vapor-liquid phase separators for helium 2 storage vessels under reduced gravity. The incorporation of components with variable cross sectional area as a method of flow rate modification was also investigated. A particular device which uses a shutter-type system for area variation was designed and constructed. This system successfully permitted flor rate changes of up to plus or minus 60% from its mean value.

Nonlinear Pricing in Energy and Environmental Markets

NASA Astrophysics Data System (ADS)

Ito, Koichiro

This dissertation consists of three empirical studies on nonlinear pricing in energy and environmental markets. The first investigates how consumers respond to multi-tier nonlinear price schedules for residential electricity. Chapter 2 asks a similar research question for residential water pricing. Finally, I examine the effect of nonlinear financial rewards for energy conservation by applying a regression discontinuity design to a large-scale electricity rebate program that was implemented in California. Economic theory generally assumes that consumers respond to marginal prices when making economic decisions, but this assumption may not hold for complex price schedules. The chapter "Do Consumers Respond to Marginal or Average Price? Evidence from Nonlinear Electricity Pricing" provides empirical evidence that consumers respond to average price rather than marginal price when faced with nonlinear electricity price schedules. Nonlinear price schedules, such as progressive income tax rates and multi-tier electricity prices, complicate economic decisions by creating multiple marginal prices for the same good. Evidence from laboratory experiments suggests that consumers facing such price schedules may respond to average price as a heuristic. I empirically test this prediction using field data by exploiting price variation across a spatial discontinuity in electric utility service areas. The territory border of two electric utilities lies within several city boundaries in southern California. As a result, nearly identical households experience substantially different nonlinear electricity price schedules. Using monthly household-level panel data from 1999 to 2008, I find strong evidence that consumers respond to average price rather than marginal or expected marginal price. I show that even though this sub-optimizing behavior has a minimal impact on individual welfare, it can critically alter the policy implications of nonlinear pricing. The second chapter " How Do Consumers Respond to Nonlinear Pricing? Evidence from Household Water Demand" provides similar empirical evidence in residential water markets. In this paper, I exploit variation in residential water pricing in Southern California to examine how consumers respond to nonlinear pricing. Contrary to the standard predictions for nonlinear budget sets, I find no bunching of consumers around the kink points of their nonlinear price schedule. I then explore whether consumers respond to marginal price, expected marginal price, or average price when faced with nonlinear water price schedules. The price schedule of one service area was changed from a linear price schedule to a nonlinear price schedule. This policy change lead to an increase in marginal price and expected marginal price but a decrease in average price for many consumers. Using household-level panel data, I find strong evidence that consumers respond to average price rather than marginal or expected marginal price. Estimates of the short-run price elasticity for the summer and winter months are -.127 and -.097, and estimates of the long-run price elasticity for the summer and winter months are -.203 and -.154. I conclude with "The Effect of Cash Rewards on Energy Conservation: Evidence from a Regression Discontinuity Design" to examine the effect of an alternative form of nonlinear pricing that was developed to provide an explicit financial incentive for conservation. In the summer of 2005, California residents received a 20% discount on their summer electricity bills if they could reduce their electricity consumption by 20% relative to 2004. Nearly all households automatically participated in the program, but the eligibility rule required households to have started their electricity service by a certain cutoff date in 2004. This rule generated an essentially random assignment of the program among households that started their service right before and after the cutoff date. Using household-level monthly billing records from the three largest California electric utilities, I find evidence that the rebate incentive reduced consumption by 5% to 10% in the areas where summer temperature is persistently high and income-level is relatively low, but the estimated treatment effects are nearly zero in other areas. To save 1 kWh of electricity, the program cost 2 cents in inland areas, 91 cents in coastal areas, and 14.8 cents for all service areas.

Learning about the energy density of liquid and semi-solid foods.

PubMed

Hogenkamp, P S; Stafleu, A; Mars, M; de Graaf, C

2012-09-01

People learn about a food's satiating capacity by exposure and consequently adjust their energy intake. To investigate the effect of energy density and texture on subsequent energy intake adjustments during repeated consumption. In a randomized crossover design, participants (n=27, age: 21±2.4 years, body mass index: 22.2±1.6 kg m(-2)) repeatedly consumed highly novel foods that were either low-energy-dense (LE: 30 kcal per 100 g) or high-energy-dense (HE: 130 kcal per 100 g), and either liquid or semi-solid, resulting in four product conditions. In each condition, a fixed portion of test food was consumed nine times as an obligatory part of breakfast, lunch and dinner on 3 consecutive days. All meals continued with an ad libitum buffet; food items for evening consumption were provided and the intake (kcal per day) was measured. Buffet intake depended on energy density and day of consumption of the test foods (day*energy interaction: P=0.02); daily buffet intake increased from day 1 (1745±577 kcal) to day 3 (1979±567 kcal) in the LE conditions; intake did not change in the HE conditions (day 1: 1523±429 kcal, day 3: 1589±424 kcal). Food texture did not affect the intake (P=0.56). Intake did depend on energy density of the test foods; participants increased their buffet intake over days in response to learning about the satiating capacity of the LE foods, but did not change buffet intake over days when repeatedly consuming a HE food as part of their meal. The adjustments in intake were made irrespective of the food texture.

LARGE-SCALE HYDROGEN PRODUCTION FROM NUCLEAR ENERGY USING HIGH TEMPERATURE ELECTROLYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

James E. O'Brien

2010-08-01

Hydrogen can be produced from water splitting with relatively high efficiency using high-temperature electrolysis. This technology makes use of solid-oxide cells, running in the electrolysis mode to produce hydrogen from steam, while consuming electricity and high-temperature process heat. When coupled to an advanced high temperature nuclear reactor, the overall thermal-to-hydrogen efficiency for high-temperature electrolysis can be as high as 50%, which is about double the overall efficiency of conventional low-temperature electrolysis. Current large-scale hydrogen production is based almost exclusively on steam reforming of methane, a method that consumes a precious fossil fuel while emitting carbon dioxide to the atmosphere. Demandmore » for hydrogen is increasing rapidly for refining of increasingly low-grade petroleum resources, such as the Athabasca oil sands and for ammonia-based fertilizer production. Large quantities of hydrogen are also required for carbon-efficient conversion of biomass to liquid fuels. With supplemental nuclear hydrogen, almost all of the carbon in the biomass can be converted to liquid fuels in a nearly carbon-neutral fashion. Ultimately, hydrogen may be employed as a direct transportation fuel in a “hydrogen economy.” The large quantity of hydrogen that would be required for this concept should be produced without consuming fossil fuels or emitting greenhouse gases. An overview of the high-temperature electrolysis technology will be presented, including basic theory, modeling, and experimental activities. Modeling activities include both computational fluid dynamics and large-scale systems analysis. We have also demonstrated high-temperature electrolysis in our laboratory at the 15 kW scale, achieving a hydrogen production rate in excess of 5500 L/hr.« less

Honey bee (Apis mellifera) nurses do not consume pollens based on their nutritional quality.

PubMed

Corby-Harris, Vanessa; Snyder, Lucy; Meador, Charlotte; Ayotte, Trace

2018-01-01

Honey bee workers (Apis mellifera) consume a variety of pollens to meet the majority of their requirements for protein and lipids. Recent work indicates that honey bees prefer diets that reflect the proper ratio of nutrients necessary for optimal survival and homeostasis. This idea relies on the precept that honey bees evaluate the nutritional composition of the foods provided to them. While this has been shown in bumble bees, the data for honey bees are mixed. Further, there is controversy as to whether foragers can evaluate the nutritional value of pollens, especially if they do not consume it. Here, we focused on nurse workers, who eat most of the pollen coming into the hive. We tested the hypothesis that nurses prefer diets with higher nutritional value. We first determined the nutritional profile, number of plant taxa (richness), and degree of hypopharyngeal gland (HG) growth conferred by three honey bee collected pollens. We then presented nurses with these same three pollens in paired choice assays and measured consumption. To further test whether nutrition influenced preference, we also presented bees with natural pollens supplemented with protein or lipids and liquid diets with protein and lipid ratios equal to the natural pollens. Different pollens conferred different degrees of HG growth, but despite these differences, nurse bees did not always prefer the most nutritious pollens. Adding protein and/or lipids to less desirable pollens minimally increased pollen attractiveness, and nurses did not exhibit a strong preference for any of the three liquid diets. We conclude that different pollens provide different nutritional benefits, but that nurses either cannot or do not assess pollen nutritional value. This implies that the nurses may not be able to communicate information about pollen quality to the foragers, who regulate the pollens coming into the hive.

Release of ethanol to the atmosphere during use of consumer cleaning products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wooley, J.; Nazaroff, W.W.; Hodgson, A.T.

1990-08-01

Liquid laundry and hand dish washing detergents contain volatile organic compounds, including ethanol, that may be liberated during use and contribute to photochemical air pollution. In this study, the release of ethanol to the atmosphere during simulated household use of liquid detergents was measured. Three replicate experiments, plus a blank, were conducted in a 20-m{sup 3} environmental chamber for each of four conditions: typical dish washing (DT), high-release dish washing (DH), typical laundry (LT), and high-release laundry (LH). Average amounts of ethanol transferred to the atmosphere per use (and the fraction of ethanol used so liberated) were 32 mg (0.038)more » for DT, 100 mg (0.049) for DH, 18 mg (0.002) for LT, and 110 mg (0.011) for LH. Thus, a large fraction of the ethanol added to wash solutions with liquid detergents is discharged to the sewer rather than transferred to the atmosphere during use.« less

Interfacial mechanisms for stability of surfactant-laden films

PubMed Central

Chai, Chew; Àlvarez-Valenzuela, Marco A.; Tajuelo, Javier; Fuller, Gerald G.

2017-01-01

Thin liquid films are central to everyday life. They are ubiquitous in modern technology (pharmaceuticals, coatings), consumer products (foams, emulsions) and also serve vital biological functions (tear film of the eye, pulmonary surfactants in the lung). A common feature in all these examples is the presence of surface-active molecules at the air-liquid interface. Though they form only molecular-thin layers, these surfactants produce complex surface stresses on the free surface, which have important consequences for the dynamics and stability of the underlying thin liquid film. Here we conduct simple thinning experiments to explore the fundamental mechanisms that allow the surfactant molecules to slow the gravity-driven drainage of the underlying film. We present a simple model that works for both soluble and insoluble surfactant systems in the limit of negligible adsorption-desorption dynamics. We show that surfactants with finite surface rheology influence bulk flow through viscoelastic interfacial stresses, while surfactants with inviscid surfaces achieve stability through opposing surface-tension induced Marangoni flows. PMID:28520734

Regeneratively Cooled Liquid Oxygen/Methane Technology Development

NASA Technical Reports Server (NTRS)

Robinson, Joel W.; Greene, Christopher B.; Stout, Jeffrey

2012-01-01

The National Aeronautics & Space Administration (NASA) has identified Liquid Oxygen (LOX)/Liquid Methane (LCH4) as a potential propellant combination for future space vehicles based upon exploration studies. The technology is estimated to have higher performance and lower overall systems mass compared to existing hypergolic propulsion systems. NASA-Marshall Space Flight Center (MSFC) in concert with industry partner Pratt & Whitney Rocketdyne (PWR) utilized a Space Act Agreement to test an oxygen/methane engine system in the Summer of 2010. PWR provided a 5,500 lbf (24,465 N) LOX/LCH4 regenerative cycle engine to demonstrate advanced thrust chamber assembly hardware and to evaluate the performance characteristics of the system. The chamber designs offered alternatives to traditional regenerative engine designs with improvements in cost and/or performance. MSFC provided the test stand, consumables and test personnel. The hot fire testing explored the effective cooling of one of the thrust chamber designs along with determining the combustion efficiency with variations of pressure and mixture ratio. The paper will summarize the status of these efforts.

Liquid-handling Lego robots and experiments for STEM education and research

PubMed Central

Gerber, Lukas C.; Calasanz-Kaiser, Agnes; Hyman, Luke; Voitiuk, Kateryna; Patil, Uday

2017-01-01

Liquid-handling robots have many applications for biotechnology and the life sciences, with increasing impact on everyday life. While playful robotics such as Lego Mindstorms significantly support education initiatives in mechatronics and programming, equivalent connections to the life sciences do not currently exist. To close this gap, we developed Lego-based pipetting robots that reliably handle liquid volumes from 1 ml down to the sub-μl range and that operate on standard laboratory plasticware, such as cuvettes and multiwell plates. These robots can support a range of science and chemistry experiments for education and even research. Using standard, low-cost household consumables, programming pipetting routines, and modifying robot designs, we enabled a rich activity space. We successfully tested these activities in afterschool settings with elementary, middle, and high school students. The simplest robot can be directly built from the widely used Lego Education EV3 core set alone, and this publication includes building and experiment instructions to set the stage for dissemination and further development in education and research. PMID:28323828

Liquid-handling Lego robots and experiments for STEM education and research.

PubMed

Gerber, Lukas C; Calasanz-Kaiser, Agnes; Hyman, Luke; Voitiuk, Kateryna; Patil, Uday; Riedel-Kruse, Ingmar H

2017-03-01

Liquid-handling robots have many applications for biotechnology and the life sciences, with increasing impact on everyday life. While playful robotics such as Lego Mindstorms significantly support education initiatives in mechatronics and programming, equivalent connections to the life sciences do not currently exist. To close this gap, we developed Lego-based pipetting robots that reliably handle liquid volumes from 1 ml down to the sub-μl range and that operate on standard laboratory plasticware, such as cuvettes and multiwell plates. These robots can support a range of science and chemistry experiments for education and even research. Using standard, low-cost household consumables, programming pipetting routines, and modifying robot designs, we enabled a rich activity space. We successfully tested these activities in afterschool settings with elementary, middle, and high school students. The simplest robot can be directly built from the widely used Lego Education EV3 core set alone, and this publication includes building and experiment instructions to set the stage for dissemination and further development in education and research.

Development of vanadium-phosphate catalysts for methanol production by selective oxidation of methane

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, R.L.

1995-12-31

The United States has vast natural gas reserves which could contribute significantly to our energy security if economical technologies for conversion to liquid fuels and chemicals were developed. Many of these reserves are small scale or in remote locations and of little value unless they can be transported to consumers. Transportation is economically performed via pipeline, but this route is usually unavailable in remote locations. Another option is to convert the methane in the gas to liquid hydrocarbons, such as methanol, which can easily and economically be transported by truck. Therefore, the conversion of methane to liquid hydrocarbons has themore » potential to decrease our dependence upon oil imports by opening new markets for natural gas and increasing its use in the transportation and chemical sectors of the economy. In this project, we are attempting to develop, and explore new catalysts capable of direct oxidation of methane to methanol. The specific objectives of this work are discussed.« less

A solid phase extraction-ion chromatography with conductivity detection procedure for determining cationic surfactants in surface water samples.

PubMed

Olkowska, Ewa; Polkowska, Żaneta; Namieśnik, Jacek

2013-11-15

A new analytical procedure for the simultaneous determination of individual cationic surfactants (alkyl benzyl dimethyl ammonium chlorides) in surface water samples has been developed. We describe this methodology for the first time: it involves the application of solid phase extraction (SPE-for sample preparation) coupled with ion chromatography-conductivity detection (IC-CD-for the final determination). Mean recoveries of analytes between 79% and 93%, and overall method quantification limits in the range from 0.0018 to 0.038 μg/mL for surface water and CRM samples were achieved. The methodology was applied to the determination of individual alkyl benzyl quaternary ammonium compounds in environmental samples (reservoir water) and enables their presence in such types of waters to be confirmed. In addition, it is a simpler, less time-consuming, labour-intensive, avoiding use of toxic chloroform and significantly less expensive methodology than previously described approaches (liquid-liquid extraction coupled with liquid chromatography-mass spectrometry). Copyright © 2013 Elsevier B.V. All rights reserved.

A review of liquid rocket propulsion programs in Japan

NASA Technical Reports Server (NTRS)

Merkle, Charles L.

1991-01-01

An assessment of Japan's current capabilities in the areas of space and transatmospheric propulsion is presented. The primary focus is upon Japan's programs in liquid rocket propulsion and in space plane and related transatmospheric areas. Brief reference is also made to their solid rocket programs, as well as to their supersonic air breathing propulsion efforts that are just getting underway.

Electrowetting-based optics

NASA Astrophysics Data System (ADS)

Kuiper, S.; Hendriks, B. H. W.; Hayes, R. A.; Feenstra, B. J.; Baken, J. M. E.

2005-09-01

Electrowetting is electrostatic manipulation of liquids. It can be used to displace and deform volumes of polar liquids. A very promising application area is optics. The surface of a volume of liquid can be used as a tunable lens and displacement of the liquid can change the refraction, diffraction or transmission of light when passing through the liquid. In this paper we describe a selection of various tunable optical components that make use of electrowetting, ranging from refractive and diffractive lenses to diaphragms and displays.

Chemical reactions of metal powders with organic and inorganic liquids during ball milling

NASA Technical Reports Server (NTRS)

Arias, A.

1975-01-01

Chromium and/or nickel powders were milled in metal chlorides and in organic liquids representative of various functional groups. The powders always reacted with the liquid and became contaminated with elements from them. The milled powders had specific surface areas ranging from 0.14 to 37 sq m/g, and the total contamination with elements from the milling liquid ranged from 0.01 to 56 weight percent. Compounds resulting from substitution, addition, or elimination reactions formed in or from the milling liquid.

Method for Determining Optimum Injector Inlet Geometry

NASA Technical Reports Server (NTRS)

Myers, W. Neill (Inventor); Trinh, Huu P. (Inventor)

2015-01-01

A method for determining the optimum inlet geometry of a liquid rocket engine swirl injector includes obtaining a throttleable level phase value, volume flow rate, chamber pressure, liquid propellant density, inlet injector pressure, desired target spray angle and desired target optimum delta pressure value between an inlet and a chamber for a plurality of engine stages. The method calculates the tangential inlet area for each throttleable stage. The method also uses correlation between the tangential inlet areas and delta pressure values to calculate the spring displacement and variable inlet geometry of a liquid rocket engine swirl injector.

Field Trial of Attenuated Salmonella Typhi Live Oral Vaccine TY21A in Liquid and Enteric-Coated Formulations and Epidemiological Survey for Incidence of Diarrhea due to Shigella Species

DTIC Science & Technology

1989-03-01

and absolute efficacy of three doses of Ty2la vaccine given in enteric-coated capsule or liquid formulation. Intensive clinical and bacteriologic...TABLES Table 1. Evaluation of the efficacy of three doses of the enteric-coated capsule formulation of Ty2la live oral vaccine given within one week in...November, 1986 thzough February, 1989 of a field trial in Area Sur Oriente and Area Norte assessing the efficacy of Ty21a vaccine in liquid or enteric

Consumer acceptance of and willingness to pay for food nanotechnology: a systematic review

NASA Astrophysics Data System (ADS)

Giles, Emma L.; Kuznesof, Sharron; Clark, Beth; Hubbard, Carmen; Frewer, Lynn J.

2015-12-01

Consumer's attitudes to, and acceptance of, emerging technologies and their applications, are important determinants of their successful implementation and commercialisation. Understanding the range of socio-psychological, cultural and affective factors which may influence consumer responses to applications of nanotechnology will help "fine-tune" the development of consumer products in line with their expectations and preferences. This is particularly true of applications in the food area, where consumer concerns about technologies applied to food production may be elevated. This research applied systematic review methodology to synthesise current knowledge regarding societal acceptance or rejection of nanotechnology applied to agri-food production. The objective was to aggregate knowledge derived from different research areas to gain an overall picture of consumer responses to nanotechnology applied to food production. Relevant electronic databases of peer-reviewed literature were searched from the earliest date available, for peer-reviewed papers which reported primary empirical data on consumer and expert acceptance of agri-food nanotechnology, using a formal systematic review protocol. Inclusion criteria for papers to be included in the review were: empirical peer-reviewed papers written in English; a population sample of adults aged 18 years and over used in the research; a research focus on consumer and expert acceptance of agri-food nanotechnology; and research on attitudes towards, and willingness to pay for, different applications of agri-food nanotechnology. Two researchers independently appraised the papers using NVivo 10 QSR software. Studies examining consumer and expert acceptance were thematically analysed, and key information was collated. The results were synthesised in order to identify trends in information relevant to consumer acceptance of nanotechnology applied to food production. Eight key themes were identified from the 32 papers which were extracted from the literature. These themes were applied to understand the determinants of consumer acceptance of agri-food nanotechnology. Nanotechnology is more likely to be accepted by consumers when applied to development of novel packaging with distinct benefits rather than when integrated directly into agri-food products. Trust and confidence in agri-food nanotechnology and its governance need to be fostered through transparent regulation and development of societally beneficial impacts to increase consumer acceptance.

Consumer acceptance of and willingness to pay for food nanotechnology: a systematic review.

PubMed

Giles, Emma L; Kuznesof, Sharron; Clark, Beth; Hubbard, Carmen; Frewer, Lynn J

Consumer's attitudes to, and acceptance of, emerging technologies and their applications, are important determinants of their successful implementation and commercialisation. Understanding the range of socio-psychological, cultural and affective factors which may influence consumer responses to applications of nanotechnology will help "fine-tune" the development of consumer products in line with their expectations and preferences. This is particularly true of applications in the food area, where consumer concerns about technologies applied to food production may be elevated. This research applied systematic review methodology to synthesise current knowledge regarding societal acceptance or rejection of nanotechnology applied to agri-food production. The objective was to aggregate knowledge derived from different research areas to gain an overall picture of consumer responses to nanotechnology applied to food production. Relevant electronic databases of peer-reviewed literature were searched from the earliest date available, for peer-reviewed papers which reported primary empirical data on consumer and expert acceptance of agri-food nanotechnology, using a formal systematic review protocol. Inclusion criteria for papers to be included in the review were: empirical peer-reviewed papers written in English; a population sample of adults aged 18 years and over used in the research; a research focus on consumer and expert acceptance of agri-food nanotechnology; and research on attitudes towards, and willingness to pay for, different applications of agri-food nanotechnology. Two researchers independently appraised the papers using NVivo 10 QSR software. Studies examining consumer and expert acceptance were thematically analysed, and key information was collated. The results were synthesised in order to identify trends in information relevant to consumer acceptance of nanotechnology applied to food production. Eight key themes were identified from the 32 papers which were extracted from the literature. These themes were applied to understand the determinants of consumer acceptance of agri-food nanotechnology. Nanotechnology is more likely to be accepted by consumers when applied to development of novel packaging with distinct benefits rather than when integrated directly into agri-food products. Trust and confidence in agri-food nanotechnology and its governance need to be fostered through transparent regulation and development of societally beneficial impacts to increase consumer acceptance.

Pulque, a Traditional Mexican Alcoholic Fermented Beverage: Historical, Microbiological, and Technical Aspects.

PubMed

Escalante, Adelfo; López Soto, David R; Velázquez Gutiérrez, Judith E; Giles-Gómez, Martha; Bolívar, Francisco; López-Munguía, Agustín

2016-01-01

Pulque is a traditional Mexican alcoholic beverage produced from the fermentation of the fresh sap known as aguamiel (mead) extracted from several species of Agave (maguey) plants that grow in the Central Mexico plateau. Currently, pulque is produced, sold and consumed in popular districts of Mexico City and rural areas. The fermented product is a milky white, viscous, and slightly acidic liquid beverage with an alcohol content between 4 and 7° GL and history of consumption that dates back to pre-Hispanic times. In this contribution, we review the traditional pulque production process, including the microbiota involved in the biochemical changes that take place during aguamiel fermentation. We discuss the historical relevance and the benefits of pulque consumption, its chemical and nutritional properties, including the health benefits associated with diverse lactic acid bacteria with probiotic potential isolated from the beverage. Finally, we describe the actual status of pulque production as well as the social, scientific and technological challenges faced to preserve and improve the production of this ancestral beverage and Mexican cultural heritage.

An image analysis of TLC patterns for quality control of saffron based on soil salinity effect: A strategy for data (pre)-processing.

PubMed

Sereshti, Hassan; Poursorkh, Zahra; Aliakbarzadeh, Ghazaleh; Zarre, Shahin; Ataolahi, Sahar

2018-01-15

Quality of saffron, a valuable food additive, could considerably affect the consumers' health. In this work, a novel preprocessing strategy for image analysis of saffron thin layer chromatographic (TLC) patterns was introduced. This includes performing a series of image pre-processing techniques on TLC images such as compression, inversion, elimination of general baseline (using asymmetric least squares (AsLS)), removing spots shift and concavity (by correlation optimization warping (COW)), and finally conversion to RGB chromatograms. Subsequently, an unsupervised multivariate data analysis including principal component analysis (PCA) and k-means clustering was utilized to investigate the soil salinity effect, as a cultivation parameter, on saffron TLC patterns. This method was used as a rapid and simple technique to obtain the chemical fingerprints of saffron TLC images. Finally, the separated TLC spots were chemically identified using high-performance liquid chromatography-diode array detection (HPLC-DAD). Accordingly, the saffron quality from different areas of Iran was evaluated and classified. Copyright © 2017 Elsevier Ltd. All rights reserved.

Arsenic Speciation in Fish Products and Seafood as a Prerequisite for Proper Risk Assessment

PubMed Central

Orletti, Roberta; Chessa, Giannina; Carloni, Cristiano; Griffoni, Francesco; Palombo, Paolo; Velieri, Francesco

2015-01-01

The Boi Cerbus lagoon, facing a mining and industrial site in Sardinia (Italy), is an important fishing area for the local population. Previous studies showed high concentrations of total arsenic (Astot) in fish, molluscs and crustaceans sampled in the lagoon, and a possible exceeding of the provisional tolerable weekly intake set by the Joint FAO/WHO Expert Committee on Food Additives by some local consumer groups. However, the percentage of inorganic As (Asinorg) should be known for a correct assessment of potential risk, as its toxicity is much higher than that of the organic forms. Eighty samples of 14 different species of fish, molluscs and crustaceans, sampled in the Boi Cerbus lagoon in 3 different seasons (winter, spring and summer), were analysed for Astot by inductively coupled plasma mass spectrometry (ICP-MS) and Asinorg by high performance liquid chromatography-ICP-MS. All the data obtained from the analysis were statistically processed to evaluate significant differences based on season, taxon and habitat, in preparation for a subsequent risk assessment. PMID:27800381

Structural stiffness and Coulomb damping in compliant foil journal bearings: Theoretical considerations

NASA Astrophysics Data System (ADS)

Ku, C.-P. Roger; Heshmat, Hooshang

1994-07-01

Compliant foil bearings operate on either gas or liquid, which makes them very attractive for use in extreme environments such as in high-temperature aircraft turbine engines and cryogenic turbopumps. However, a lack of analytical models to predict the dynamic characteristics of foil bearings forces the bearing designer to rely on prototype testing, which is time-consuming and expensive. In this paper, the authors present a theoretical model to predict the structural stiffness and damping coefficients of the bump foil strip in a journal bearing or damper. Stiffness is calculated based on the perturbation of the journal center with respect to its static equilibrium position. The equivalent viscous damping coefficients are determined based on the area of a closed hysteresis loop of the journal center motion. The authors found, theoretically, that the energy dissipated from this loop was mostly contributed by the frictional motion between contact surfaces. In addition, the source and mechanism of the nonlinear behavior of the bump foil strips were examined. With the introduction of this enhanced model, the analytical tools are now available for the design of compliant foil bearings.

Trigger chemistries for better industrial formulations.

PubMed

Wang, Hsuan-Chin; Zhang, Yanfeng; Possanza, Catherine M; Zimmerman, Steven C; Cheng, Jianjun; Moore, Jeffrey S; Harris, Keith; Katz, Joshua S

2015-04-01

In recent years, innovations and consumer demands have led to increasingly complex liquid formulations. These growing complexities have provided industrial players and their customers access to new markets through product differentiation, improved performance, and compatibility/stability with other products. One strategy for enabling more complex formulations is the use of active encapsulation. When encapsulation is employed, strategies are required to effect the release of the active at the desired location and time of action. One particular route that has received significant academic research effort is the employment of triggers to induce active release upon a specific stimulus, though little has translated for industrial use to date. To address emerging industrial formulation needs, in this review, we discuss areas of trigger release chemistries and their applications specifically as relevant to industrial use. We focus the discussion on the use of heat, light, shear, and pH triggers as applied in several model polymeric systems for inducing active release. The goal is that through this review trends will emerge for how technologies can be better developed to maximize their value through industrial adaptation.

An automated online turboflow cleanup LC/MS/MS method for the determination of 11 plasticizers in beverages and milk.

PubMed

Ates, Ebru; Mittendorf, Klaus; Senyuva, Hamide

2013-01-01

An automated sample preparation technique involving cleanup and analytical separation in a single operation using an online coupled TurboFlow (RP-LC system) is reported. This method eliminates time-consuming sample preparation steps that can be potential sources for cross-contamination in the analysis of plasticizers. Using TurboFlow chromatography, liquid samples were injected directly into the automated system without previous extraction or cleanup. Special cleanup columns enabled specific binding of target compounds; higher MW compounds, i.e., fats and proteins, and other matrix interferences with different chemical properties were removed to waste, prior to LC/MS/MS. Systematic stepwise method development using this new technology in the food safety area is described. Selection of optimum columns and mobile phases for loading onto the cleanup column followed by transfer onto the analytical column and MS detection are critical method parameters. The method was optimized for the assay of 10 phthalates (dimethyl, diethyl, dipropyl, butyl benzyl, diisobutyl, dicyclohexyl, dihexyl, diethylhexyl, diisononyl, and diisododecyl) and one adipate (diethylhexyl) in beverages and milk.

Pulque, a Traditional Mexican Alcoholic Fermented Beverage: Historical, Microbiological, and Technical Aspects

PubMed Central

Escalante, Adelfo; López Soto, David R.; Velázquez Gutiérrez, Judith E.; Giles-Gómez, Martha; Bolívar, Francisco; López-Munguía, Agustín

2016-01-01

Pulque is a traditional Mexican alcoholic beverage produced from the fermentation of the fresh sap known as aguamiel (mead) extracted from several species of Agave (maguey) plants that grow in the Central Mexico plateau. Currently, pulque is produced, sold and consumed in popular districts of Mexico City and rural areas. The fermented product is a milky white, viscous, and slightly acidic liquid beverage with an alcohol content between 4 and 7° GL and history of consumption that dates back to pre-Hispanic times. In this contribution, we review the traditional pulque production process, including the microbiota involved in the biochemical changes that take place during aguamiel fermentation. We discuss the historical relevance and the benefits of pulque consumption, its chemical and nutritional properties, including the health benefits associated with diverse lactic acid bacteria with probiotic potential isolated from the beverage. Finally, we describe the actual status of pulque production as well as the social, scientific and technological challenges faced to preserve and improve the production of this ancestral beverage and Mexican cultural heritage. PMID:27446061

Estimating population size in wastewater-based epidemiology. Valencia metropolitan area as a case study.

PubMed

Rico, María; Andrés-Costa, María Jesús; Picó, Yolanda

2017-02-05

Wastewater can provide a wealth of epidemiologic data on common drugs consumed and on health and nutritional problems based on the biomarkers excreted into community sewage systems. One of the biggest uncertainties of these studies is the estimation of the number of inhabitants served by the treatment plants. Twelve human urine biomarkers -5-hydroxyindoleacetic acid (5-HIAA), acesulfame, atenolol, caffeine, carbamazepine, codeine, cotinine, creatinine, hydrochlorothiazide (HCTZ), naproxen, salicylic acid (SA) and hydroxycotinine (OHCOT)- were determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to estimate population size. The results reveal that populations calculated from cotinine, 5-HIAA and caffeine are commonly in agreement with those calculated by the hydrochemical parameters. Creatinine is too unstable to be applicable. HCTZ, naproxen, codeine, OHCOT and carbamazepine, under or overestimate the population compared to the hydrochemical population estimates but showed constant results through the weekdays. The consumption of cannabis, cocaine, heroin and bufotenine in Valencia was estimated for a week using different population calculations. Copyright © 2016 Elsevier B.V. All rights reserved.

[Advances of poly (ionic liquid) materials in separation science].

PubMed

Liu, Cuicui; Guo, Ting; Su, Rina; Gu, Yuchen; Deng, Qiliang

2015-11-01

Ionic liquids, as novel ionization reagents, possess beneficial characteristics including good solubility, conductivity, thermal stability, biocompatibility, low volatility and non-flammability. Ionic liquids are attracting a mass of attention of analytical chemists. Poly (ionic liquid) materials have common performances of ionic liquids and polymers, and have been successfully applied in separation science area. In this paper, we discuss the interaction mechanisms between the poly(ionic liquid) materials and analytes including hydrophobic/hydrophilic interactions, hydrogen bond, ion exchange, π-π stacking and electrostatic interactions, and summarize the application advances of the poly(ionic liquid) materials in solid phase extraction, chromatographic separation and capillary electrophoresis. At last, we describe the future prospect of poly(ionic liquid) materials.

12 CFR 25.22 - Lending test.

Code of Federal Regulations, 2013 CFR

2013-01-01

... assessment area(s) through its lending activities by considering a bank's home mortgage, small business... mortgage, small business, small farm, and consumer loans, if applicable, in the bank's assessment area(s); (2) Geographic distribution. The geographic distribution of the bank's home mortgage, small business...

12 CFR 25.22 - Lending test.

Code of Federal Regulations, 2011 CFR

2011-01-01

... assessment area(s) through its lending activities by considering a bank's home mortgage, small business... mortgage, small business, small farm, and consumer loans, if applicable, in the bank's assessment area(s); (2) Geographic distribution. The geographic distribution of the bank's home mortgage, small business...

12 CFR 25.22 - Lending test.

Code of Federal Regulations, 2014 CFR

2014-01-01

... assessment area(s) through its lending activities by considering a bank's home mortgage, small business... mortgage, small business, small farm, and consumer loans, if applicable, in the bank's assessment area(s); (2) Geographic distribution. The geographic distribution of the bank's home mortgage, small business...

Sleeve gastrectomy effects on hunger, satiation, and gastrointestinal hormone and motility responses after a liquid meal test.

PubMed

Mans, Esther; Serra-Prat, Mateu; Palomera, Elisabet; Suñol, Xavier; Clavé, Pere

2015-09-01

The relation between hunger, satiation, and integrated gastrointestinal motility and hormonal responses in morbidly obese patients after sleeve gastrectomy has not been determined. The objective was to assess the effects of sleeve gastrectomy on hunger, satiation, gastric and gallbladder motility, and gastrointestinal hormone response after a liquid meal test. Three groups were studied: morbidly obese patients (n = 16), morbidly obese patients who had had sleeve gastrectomy (n = 8), and nonobese patients (n = 16). The participants fasted for 10 h and then consumed a 200-mL liquid meal (400 kcal + 1.5 g paracetamol). Fasting and postprandial hunger, satiation, hormone concentrations, and gastric and gallbladder emptying were measured several times over 4 h. No differences were observed in hunger and satiation curves between morbidly obese and nonobese groups; however, sleeve gastrectomy patients were less hungry and more satiated than the other groups. Antrum area during fasting in morbidly obese patients was statistically significant larger than in the nonobese and sleeve gastrectomy groups. Gastric emptying was accelerated in the sleeve gastrectomy group compared with the other 2 groups (which had very similar results). Gallbladder emptying was similar in the 3 groups. Sleeve gastrectomy patients showed the lowest ghrelin concentrations and higher early postprandial cholecystokinin and glucagon-like peptide 1 peaks than did the other participants. This group also showed an improved insulin resistance pattern compared with morbidly obese patients. Sleeve gastrectomy seems to be associated with profound changes in gastrointestinal physiology that contribute to reducing hunger and increasing sensations of satiation. These changes include accelerated gastric emptying, enhanced postprandial cholecystokinin and glucagon-like peptide 1 concentrations, and reduced ghrelin release, which together may help patients lose weight and improve their glucose metabolism after surgery. This trial was registered at clinicaltrials.gov as NCT02414893. © 2015 American Society for Nutrition.

Large-Flow-Area Flow-Selective Liquid/Gas Separator

NASA Technical Reports Server (NTRS)

Vasquez, Arturo; Bradley, Karla F.

2010-01-01

This liquid/gas separator provides the basis for a first stage of a fuel cell product water/oxygen gas phase separator. It can separate liquid and gas in bulk in multiple gravity environments. The system separates fuel cell product water entrained with circulating oxygen gas from the outlet of a fuel cell stack before allowing the gas to return to the fuel cell stack inlet. Additional makeup oxygen gas is added either before or after the separator to account for the gas consumed in the fuel cell power plant. A large volume is provided upstream of porous material in the separator to allow for the collection of water that does not exit the separator with the outgoing oxygen gas. The water then can be removed as it continues to collect, so that the accumulation of water does not impede the separating action of the device. The system is designed with a series of tubes of the porous material configured into a shell-and-tube heat exchanger configuration. The two-phase fluid stream to be separated enters the shell-side portion of the device. Gas flows to the center passages of the tubes through the porous material and is then routed to a common volume at the end of the tubes by simple pressure difference from a pumping device. Gas flows through the porous material of the tubes with greater ease as a function of the ratio of the dynamic viscosity of the water and gas. By careful selection of the dimensions of the tubes (wall thickness, porosity, diameter, length of the tubes, number of the tubes, and tube-to-tube spacing in the shell volume) a suitable design can be made to match the magnitude of water and gas flow, developed pressures from the oxygen reactant pumping device, and required residual water inventory for the shellside volume.

Effect of ensure on the oral bioavailability of gatifloxacin in healthy volunteers.

PubMed

Kays, Michael B; Overholser, Brian R; Lagvankar, Seema; Goldman, Mitchell; Sowinski, Kevin M

2005-11-01

To determine the effect of Ensure on the relative oral bioavailability of gatifloxacin in healthy volunteers. Single-dose, randomized, crossover study. University-affiliated research center. Twelve healthy volunteers (six men, six women) aged 18 years or older with no clinically significant abnormal findings on physical examination or in medical history. Intervention. Subjects consumed 120 ml of study liquid-water or Ensure-every 30 minutes for five doses. With the second dose, subjects ingested a single gatifloxacin 400-mg tablet that had been uniformly crushed and mixed into the study liquid. Serial blood samples were collected for 48 hours, and gatifloxacin concentrations were determined by high-performance liquid chromatography. Pharmacokinetic data were analyzed by using noncompartmental methods. Maximum serum concentration (Cmax) and area under the serum concentration-time curve from zero to infinity (AUC0-infinity) were tested for bioequivalence after log-transformation of the data. Comparison of parameters for gatifloxacin administered with water versus those with Ensure showed that Cmax (4.35 +/- 0.90 vs 2.41 +/- 0.58 mug/ml, p<0.0001) and AUC(0-infinity) (42.4 +/- 10.1 vs 31.3 +/- 8.3 mg*hr/L, p<0.0001) were significantly decreased with Ensure, and bioequivalence was not achieved for either parameter. The geometric least squares mean ratio was 0.553 (90% confidence interval [CI] 0.501-0.611) for Cmax and 0.730 (90% CI 0.664-0.802) for AUC0-infinity. The median time to reach Cmax was significantly prolonged when gatifloxacin was administered with Ensure versus that with water (2.5 hrs vs 1.0 hr, p=0.006). The Cmax and AUC0-infinity of gatifloxacin were significantly decreased when the drug was administered with Ensure. The clinical significance of these findings will depend on the offending pathogen and its susceptibility to gatifloxacin.

Three-dimensional (3D) evaluation of liquid distribution in shake flask using an optical fluorescence technique.

PubMed

Azizan, Amizon; Büchs, Jochen

2017-01-01

Biotechnological development in shake flask necessitates vital engineering parameters e.g. volumetric power input, mixing time, gas liquid mass transfer coefficient, hydromechanical stress and effective shear rate. Determination and optimization of these parameters through experiments are labor-intensive and time-consuming. Computational Fluid Dynamics (CFD) provides the ability to predict and validate these parameters in bioprocess engineering. This work provides ample experimental data which are easily accessible for future validations to represent the hydrodynamics of the fluid flow in the shake flask. A non-invasive measuring technique using an optical fluorescence method was developed for shake flasks containing a fluorescent solution with a waterlike viscosity at varying filling volume (V L  = 15 to 40 mL) and shaking frequency ( n  = 150 to 450 rpm) at a constant shaking diameter (d o  = 25 mm). The method detected the leading edge (LB) and tail of the rotating bulk liquid (TB) relative to the direction of the centrifugal acceleration at varying circumferential heights from the base of the shake flask. The determined LB and TB points were translated into three-dimensional (3D) circumferential liquid distribution plots. The maximum liquid height (H max ) of the bulk liquid increased with increasing filling volume and shaking frequency of the shaking flask, as expected. The toroidal shapes of LB and TB are clearly asymmetrical and the measured TB differed by the elongation of the liquid particularly towards the torus part of the shake flask. The 3D liquid distribution data collected at varying filling volume and shaking frequency, comprising of LB and TB values relative to the direction of the centrifugal acceleration are essential for validating future numerical solutions using CFD to predict vital engineering parameters in shake flask.

Variations in Label Information and Nicotine Levels in Electronic Cigarette Refill Liquids in South Korea: Regulation Challenges

PubMed Central

Kim, Sungroul; Goniewicz, Maciej L.; Yu, Sol; Kim, Bokyeong; Gupta, Ribhav

2015-01-01

Background: In South Korea, the consumption of liquid nicotine used in electronic cigarettes has dramatically increased from 4310 L in 2012 to 7220 L in 2013. This study aimed to examine the level of heterogeneity of contents of the labels and discrepancy of the nicotine content between that indicated on the label and the actual values for electronic cigarette liquid refill products in South Korea. Methods: We purchased 32 electronic cigarette liquid refill products (17 Korean domestic, 15 imported ones) and one pure nicotine product at six different electronic cigarette retail stores in Seoul between May and June 2014. The actual nicotine concentrations of each product were measured by a blinded analyst at Roswell Park Cancer Institute, Buffalo, NY, USA. Results: Three out of 15 imported liquid refill products provided manufacturing dates, while expiration dates were available on eight products. The range of nicotine concentration was from “not detected” to 17.5 mg/mL. Labeling discrepancies of the concentrations ranged from −32.2% to 3.3% among electronic cigarette liquid refill products. The highest concentration (150.3 ± 7.9 mg/mL) was found in a sample labeled as “pure nicotine”. Conclusions: There is no standardization of labelling among electronic cigarette liquids sampled from retail stores and the labels did not accurately reflect the content. One product labeled “pure nicotine” raises concerns, since it may be poisonous to consumers, especially to children. This study revealed the urgent need for the development of product regulations in South Korea. PMID:25950652

Which types of hospital mergers save consumers money?

PubMed

Connor, R A; Feldman, R D; Dowd, B E; Radcliff, T A

1997-01-01

This study analyzes the changes in costs and prices from 1986 to 1994 for more than 3,500 U.S. short-term general hospitals, including 122 horizontal mergers. These mergers were generally financially beneficial to consumers, providing average price reductions of approximately 7 percent. Merger-related price reductions were considerably less in market areas with higher market concentration levels. Merger-related price reductions in areas with higher penetration by health maintenance organizations (HMOs) were approximately twice those in areas with lower HMO penetration. Merger-related price reductions were greater for low-occupancy hospitals, nonteaching hospitals, nonsystem hospitals, similar-size hospitals, and hospitals with greater premerger service duplication.

Northern California Fires

NASA Image and Video Library

2017-10-31

The October fires in Northern California were some of the most destructive in the state's history. The burned area on the right side of the image is the ATLAS fire, that burned east of Napa; the fire consumed 51,000 acres and destroyed almost 500 structures. The burned area on the left is part of the Nuns fire that burned between Sonoma and Napa; it consumed 110,000 acres, and destroyed almost 7,000 structures. The images were acquired September 7, 2016 and October 28, 2017, cover an area of 34.5 by 39 kilometers, and are located near 38.3 degrees north, 122.3 degrees east. https://photojournal.jpl.nasa.gov/catalog/PIA22019

Application of HRAM screening and LC-MS/MS confirmation of active pharmaceutical ingredient in "natural" herbal supplements.

PubMed

Pascali, Jennifer P; Fais, Paolo; Vaiano, Fabio; Bertol, Elisabetta

2018-05-01

The growing market of herbal remedies worldwide could pose severe problems to consumers' health due to the possible presence of potentially harmful, undeclared synthetic substances or analogues of prescription drugs. The present work shows a simple but effective approach to unequivocally identify synthetic anorectic compounds in allegedly 'natural' herbal extracts, by exploiting liquid chromatography/time of flight (Q-TOF LC/MS) technology coupled to liquid chromatography/triple quadrupole (LC-MS/MS) confirmation and quantitation. The procedure was applied to five tea herbal extracts and pills sold as coadjutant for weigh loss. The method exploited liquid-liquid sample extraction (LLE) and separation in a C18 (2.1mm×150mm, 1.8μm) column. QTOF acquisitions were carried out both in scan mode and all ion MS/MS mode and results were obtained after search against ad hoc prepared library. Sibutramine, 4-hydroxyamphetamine, caffeine and theophylline were preliminary identified samples. Confirmation and quantitation of the preliminary identified compounds were obtained in LC-MS/MS after preparation of appropriated standards. Sibutramine, caffeine and theophylline were finally confirmed and quantitate. Copyright © 2018 Elsevier B.V. All rights reserved.

Detection of AGXT bgene mutations by denaturing high-performance liquid chromatography for diagnosis of hyperoxaluria type 1.

PubMed

Pirulli, D; Giordano, M; Lessi, M; Spanò, A; Puzzer, D; Zezlina, S; Boniotto, M; Crovella, S; Florian, F; Marangella, M; Momigliano-Richiardi, P; Savoldi, S; Amoroso, A

2001-06-01

Primary hyperoxaluria type 1 is an autosomal recessive disorder of glyoxylate metabolism, caused by a deficiency of alanine:glyoxylate aminotransferase, which is encoded by a single copy gene (AGXT. The aim of this research was to standardize denaturing high-performance liquid chromatography, a new, sensitive, relatively inexpensive, and automated technique, for the detection of AGXT mutation. Denaturing high-performance liquid chromatography was used to analyze in blind the AGXT gene in 20 unrelated Italian patients with primary hyperoxaluria type I previously studied by other standard methods (single-strand conformation polymorphism analysis and direct sequencing) and 50 controls. Denaturing high-performance liquid chromatography allowed us to identify 13 mutations and the polymorphism at position 154 in exon I of the AGXT gene. Hence the method is more sensitive and less time consuming than single-strand conformation polymorphism analysis for the detection of AGXT mutations, thus representing a useful and reliable tool for detecting the mutations responsible for primary hyperoxaluria type 1. The new technology could also be helpful in the search for healthy carriers of AGXT mutations amongst family members and their partners, and for screening of AGXT polymorphisms in patients with nephrolithiasis and healthy populations.

Study of the Mechanism of Liquid Slag Infiltration for Lubrication in Slab Continuous Casting

NASA Astrophysics Data System (ADS)

Zhang, Shaoda; Wang, Qiangqiang; He, Shengping; Wang, Qian

2018-04-01

Consistent and uniform lubrication of the solidifying shell, especially in the meniscus, is crucial for the smooth continuous casting operation and production of strands free of surface defects. Thus, the current study established a coupled model to study the inflow behavior of liquid slag to the mold-strand channel, taking the solidification of steel and slag and the periodic oscillation of mold into account. The difficulties and solutions for the simulation were described in detail. The predicted profiles of the slag rim and initial shell were in good agreement with the reports. The main results indicated that liquid slag could be squeezed out and back into the slag pool in a negative strip period while a large amount of liquid slag could infiltrate into the mold-strand channel. Thus, the amount of slag consumed in the negative strip period was relatively small compared with that in the positive strip period. The predicted variation of slag consumption during mold oscillation was periodic, and the average value was 0.274 kg/m2, which agreed well with the slag consumption in industrial practice. The current model can predict and optimize the oscillation parameters aiming at stable lubrication conditions.

Large three-dimensional photonic crystals based on monocrystalline liquid crystal blue phases.

PubMed

Chen, Chun-Wei; Hou, Chien-Tsung; Li, Cheng-Chang; Jau, Hung-Chang; Wang, Chun-Ta; Hong, Ching-Lang; Guo, Duan-Yi; Wang, Cheng-Yu; Chiang, Sheng-Ping; Bunning, Timothy J; Khoo, Iam-Choon; Lin, Tsung-Hsien

2017-09-28

Although there have been intense efforts to fabricate large three-dimensional photonic crystals in order to realize their full potential, the technologies developed so far are still beset with various material processing and cost issues. Conventional top-down fabrications are costly and time-consuming, whereas natural self-assembly and bottom-up fabrications often result in high defect density and limited dimensions. Here we report the fabrication of extraordinarily large monocrystalline photonic crystals by controlling the self-assembly processes which occur in unique phases of liquid crystals that exhibit three-dimensional photonic-crystalline properties called liquid-crystal blue phases. In particular, we have developed a gradient-temperature technique that enables three-dimensional photonic crystals to grow to lateral dimensions of ~1 cm (~30,000 of unit cells) and thickness of ~100 μm (~ 300 unit cells). These giant single crystals exhibit extraordinarily sharp photonic bandgaps with high reflectivity, long-range periodicity in all dimensions and well-defined lattice orientation.Conventional fabrication approaches for large-size three-dimensional photonic crystals are problematic. By properly controlling the self-assembly processes, the authors report the fabrication of monocrystalline blue phase liquid crystals that exhibit three-dimensional photonic-crystalline properties.

12 CFR 345.41 - Assessment area delineation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the bank's delineation of its assessment area(s) as a separate performance criterion, but the FDIC..., such as those consumer loans on which the bank elects to have its performance assessed). (d... area(s) delineated by a bank in its evaluation of the bank's CRA performance unless the FDIC determines...

12 CFR 228.41 - Assessment area delineation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... does not evaluate the bank's delineation of its assessment area(s) as a separate performance criterion..., such as those consumer loans on which the bank elects to have its performance assessed). (d... area(s) delineated by a bank in its evaluation of the bank's CRA performance unless the Board...

[Differences in diet intake frequency of adults: findings from half a million people in 10 areas in China].

PubMed

Qin, Chenxi; Yu, Canqing; Du, Huaidong; Guo, Yu; Bian, Zheng; Lyu, Jun; Zhou, Huiyan; Tan, Yunlong; Chen, Junshi; Chen, Zhengming; Li, Liming

2015-09-01

To describe the differences in diet intake frequency of adults in 10 areas surveyed by China Kadoorie Biobank (CKB) project. CKB project recruited voluntary residents aged 30-79 years from 5 urban areas and 5 rural areas in China. The baseline survey was conducted among 512 891 eligible subjects during 2004-2008. The intake frequencies of 12 food groups were assessed through in-person interviews and analyzed. The results were adjusted for age and sex structure of the study population. Rice was the main cereal consumed every day in urban areas (99.0%) and rural areas (99.9%) in southern China, while wheat was the main cereal consumed every day in rural areas (99.0%) and Qingdao (88.4%) in northern China. Most subjects in Henan (98.8%) consumed other staple food every day. The lowest proportion of daily intake of fresh vegetables was observed in Gansu (74.0%) . In both southern and northern areas, urban subjects had higher proportions of daily intakes of fresh fruits, preserved vegetables, and meat than rural subjects. Similar results were found when comparing the proportions of intakes of poultry and fish/seafood at least 1 day every week. Contrast to southern China (urban: 6.5%, rural: 6.9%) , the proportions of daily intake of fresh eggs were higher in both urban areas (37.1%) and rural areas (14.6%) in northern China. The highest proportions of daily intake of soybean products and dairy products were observed in Harbin (10.0%) and Qingdao (34.3%). The intake of cereal, fresh eggs and soybean products differed between the south and the north of China. The intake of meat, poultry, fish/seafood, fresh fruits, preserved vegetables and dairy products varied considerably between urban areas and rural areas.

How to use local resources to fight malnutrition in Madagascar? A study combining a survey and a consumer test.

PubMed

Ramaroson Rakotosamimanana, Vonimihaingo; Valentin, Dominique; Arvisenet, Gaëlle

2015-12-01

This study aimed to understand consumers' habits and belief structures concerning local food products and to develop a new snack as a way to fight against children malnutrition in Madagascar. A large variety of natural food resources grow in Madagascar, like Moringa oleifera (MO) which leaves are rich in nutrients but not consumed. First, a survey conducted in four areas of Madagascar revealed that MO leaves are known for their health benefits but infrequently consumed, probably because of their low satiating power and strong odor. In the studied areas, different levels of consumption were observed, which may be linked to varying levels of familiarity with MO by the local populations, this in turn resulting from different situations regarding geographical and historical availability. In contrary, resources such as cassava are perceived as having negative effects on health but are widely consumed because they are cheap, liked by children and satiating. The second step in the study aimed to propose products that could increase MO consumption without completely changing food practices. The acceptability of snacks associating cassava roots and MO was evaluated by means of hedonic tests performed by children. Between the snacks tested, the preferred snack contained the highest quantity of MO and was sweetened. There was no effect of area on the acceptance of the formulated snacks. This work is an evaluation of the potential of MO in the diet of malnourished population. Copyright © 2015 Elsevier Ltd. All rights reserved.

Woody biomass size reduction with selective material orientation

DOE PAGES

Dooley, James H.; Lanning, David N.; Lanning, Christopher J.

2013-01-01

Roundwood logs from forests and energy plantations must be chipped, ground, or otherwise comminuted into small particles prior to conversion to solid or liquid biofuels. Rotary veneer followed by cross-grain shearing is demonstrated to be a novel and low energy consuming method for primary breakdown of logs into a raw material having high transport and storage density. Processing of high moisture raw logs into 2.5 – 4.2 mm particles prior to drying or conversion consumes less than 20% of the energy required for achieving similar particle size with hammer mills while producing a more uniform particle shape and size. Asmore » a result, energy savings from the proposed method may reduce the comminution cost of woody feedstocks by more than half.« less

Short communication: Monitoring the presence of perfluoroalkyl substances in Italian cow milk.

PubMed

Barbarossa, Andrea; Gazzotti, Teresa; Zironi, Elisa; Serraino, Andrea; Pagliuca, Giampiero

2014-01-01

Perfluoroalkyl substances (PFAS) are fully fluorinated compounds widely used during the last 60 yr in the production of multiple industrial and consumer applications, such as food packaging, nonstick cookware, cleaning agents, and many more. These emerging contaminants have recently become of concern for human health because of their potential negative effects. The risk of exposure to PFAS for humans is mainly related to diet, and the increasing interest in food safety has led the European Commission to call Member States to monitor these contaminants in food matrices. The purpose of the present work was to perform the first monitoring on the presence of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), the 2 main and most widely investigated molecules of this family, in cow milk commercially available in Italy. We used an analytical protocol consisting of liquid-liquid extraction followed by 2 purification steps through solid-phase extraction cartridges and injection on an ultra-performance liquid chromatography-tandem mass spectroscopy system. The analysis of 67 samples of different types of cow milk from Italy demonstrated that contamination by PFOS was often present, although at relatively low concentrations (up to 97 ng/L), whereas PFOA was rarely found. On the basis of these results and data reported in the literature on this matrix, milk does not seem to be a major source of PFAS compared with other food categories such as fish and seafood. However, variability among different types of milk must be taken into account, and surveys of milk-derived products would be helpful to better define the risk for consumers. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Consumers' and case managers' perceptions of mental health and community support service needs.

PubMed

Crane-Ross, D; Roth, D; Lauber, B G

2000-04-01

Consumers with serious and persistent mental illness (N = 385) and their case managers rated the amount of help needed and the amount of help received with mental health and community support services. Consumers also identified their primary source of help with each type of need. Results highlighted areas of agreement and disagreement between consumers' and case managers' perceptions. Consumers' reports revealed a strong reliance on sources of support outside the mental health system (e.g., family and friends) for many community support service needs, interpersonal needs, and crisis-related needs. In general, correlations between consumers' and case managers' ratings of help needed and help received were low. Consumers perceived the majority of their needs to be unmet; case managers perceived the majority of consumer needs to be overly met. Discussion focuses on the importance of increasing consensus between consumers and case managers regarding needs by including consumers in treatment planning and providing them with more information about available services. It is recommended that researchers and evaluators examine perceptions of help needed, help received, and sources of help when assessing service needs.

Consumer Problems of Older Americans. New Directions for Government and Business. Background Papers and Recommendations from a Mini-Conference for the White House Conference on Aging (Washington, DC, January 29-30, 1980).

ERIC Educational Resources Information Center

National Retired Teachers Association, Washington, DC.

These background papers and recommendations from a mini-conference on the consumer problems of older Americans and new directions that government and business should take to protect the consumer rights of the elderly address the following areas: credit, food, insurance, investments, prescription drugs and medical appliances, and primary health…

I Never Left a Place that I didn’t Clean up. The Legacy of Historic Settlement on Lands Administered by Holloman Air Force Base.

DTIC Science & Technology

1994-10-01

these two sites. Extensive artifact analyses would contribute to studies concerning consumer behavior , and archaeological testing would help determine...Specific research areas to be considered especially from the artifact assemblages are: subsistence patterns, consumer behavior , market accessibility...to provide archaeological information which could be used in various studies, such as subsistence patterns, consumer behavior , market accessibility

Intra-oral administration of rebamipide liquid prevents tongue injuries induced by X-ray irradiation in rats.

PubMed

Nakashima, Takako; Uematsu, Naoya; Sakurai, Kazushi

2017-07-01

Oral mucositis is a common and serious side effect in patients who undergo cytotoxic cancer therapies. The purpose of this study was to investigate the preventive effects of rebamipide on radiation-induced glossitis model in rats. Glossitis was induced by a single dose of 15 Gy of X-rays to the snouts of rats (day 0). A novel form of rebamipide liquid comprising its submicronized crystals was administered intra-orally. The preventive effect of rebamipide on tongue injuries was macroscopically evaluated on day 7 following irradiation. The pretreatment period, dosing frequency, and dose dependency of rebamipide were examined. Two percent rebamipide liquid, administered six times a day for 14 days from day -7 to day 6, significantly decreased the ulcer-like area. However, no significant effect was observed when rebamipide was given either from day -4 or from day -1. Four or six times daily, 2% rebamipide liquid significantly inhibited the ulcer-like injury area ratio, but not when given twice daily. Rebamipide liquid, 1, 2, and 4% six times daily significantly reduced the area ratios of total injury and ulcer-like injury in a dose-dependent manner. Gene expression and protein levels of proinflammatory cytokines and chemokines were dramatically elevated in the irradiated tongues of control rats on day 7 without rebamipide liquid treatment. They were dose-dependently and significantly suppressed in rebamipide-treated groups. Intra-oral administration of rebamipide liquid prevented oral mucositis dose-dependently accompanied by the suppression of inflammatory expression in the radiation-induced rats' glossitis model.

Multicompartment Liquid-Cooling/Warming Protective Garments

NASA Technical Reports Server (NTRS)

Koscheyev, Victor S.; Leon, Gloria R.; Dancisak, Michael J.

2005-01-01

Shortened, multicompartment liquid-cooling / warming garments (LCWGs) for protecting astronauts, firefighters, and others at risk of exposure to extremes of temperature are undergoing development. Unlike prior liquid-circulation thermal-protection suits that provide either cooling or warming but not both, an LCWG as envisioned would provide cooling at some body locations and/or heating at other locations, as needed: For example, sometimes there is a need to cool the body core and to heat the extremities simultaneously. An LCWG garment of the type to be developed is said to be shortened because the liquid-cooling and - heating zones would not cover the whole body and, instead, would cover reduced areas selected for maximum heating and cooling effectiveness. Physiological research is under way to provide a rational basis for selection of the liquid-cooling and -heating areas. In addition to enabling better (relative to prior liquid-circulation garments) balancing of heat among different body regions, the use of selective heating and cooling in zones would contribute to a reduction in the amount of energy needed to operate a thermal-protection suit.

Consumer acceptance of technology-based food innovations: lessons for the future of nutrigenomics.

PubMed

Ronteltap, A; van Trijp, J C M; Renes, R J; Frewer, L J

2007-07-01

Determinants of consumer adoption of innovations have been studied from different angles and from the perspectives of various disciplines. In the food area, the literature is dominated by a focus on consumer concern. This paper reviews previous research into acceptance of technology-based innovation from both inside and outside the food domain, extracts key learnings from this literature and integrates them into a new conceptual framework for consumer acceptance of technology-based food innovations. The framework distinguishes 'distal' and 'proximal' determinants of acceptance. Distal factors (characteristics of the innovation, the consumer and the social system) influence consumers' intention to accept an innovation through proximal factors (perceived cost/benefit considerations, perceptions of risk and uncertainty, social norm and perceived behavioural control). The framework's application as a tool to anticipate consumer reaction to future innovations is illustrated for an actual technology-based innovation in food science, nutrigenomics (the interaction between nutrition and human genetics).

Meteorological Analysis of Icing Conditions Encountered in Low-Altitude Stratiform Clouds

NASA Technical Reports Server (NTRS)

Kline, D. B.; Walker, J. A.

1951-01-01

Liquid-water content, droplet size, and temperature data measured during 22 flights in predominatly stratiform clouds through the 1948-49 and the 1949-50 winters are presented. Several icing encounters were of greater severity than those previously measured over the same geographical area, but were within the limits of similar measurements obtained over different terrain within the United States. An analysis of meteorological conditions existing during the 74 flights conducted for four winters indicated an inverse relation of liquid-water concentration to maximum horizontal extent of icing clouds. Data on the vertical extent of supercooled clouds are also presented. Icing conditions were most likely to occur in the southwest and northwest quadrants of a cyclone area, and least likely to occur in the southeast and northeast quadrants where convergent air flow and lifting over the associated warm frontal surface usually cause precipitation. Additional data indicated that, icing conditions were usually encountered in nonprecipitating clouds existing at subfreezing temperatures and were unlikely over areas where most weather observing stations reported the existence of precipitation. Measurements of liquid-water content obtained during 12 flights near the time and location of radiosonde observations were compared with theoretical values. The average liquid-water content of a cloud layer, as measured by the multicylinder technique, seldom exceeded two-thirds of that which could be released by adiabatic lifting. Local areas near the cloud tops equaled or occasionally exceeded the calculated maximum quantity of liquid water.

The two-phase flow IPTT method for measurement of nonwetting-wetting liquid interfacial areas at higher nonwetting saturations in natural porous media

PubMed Central

Zhong, Hua; Ouni, Asma El; Lin, Dan; Wang, Bingguo; Brusseau, Mark L

2017-01-01

Interfacial areas between nonwetting-wetting (NW-W) liquids in natural porous media were measured using a modified version of the interfacial partitioning tracer test (IPTT) method that employed simultaneous two-phase flow conditions, which allowed measurement at NW saturations higher than trapped residual saturation. Measurements were conducted over a range of saturations for a well-sorted quartz sand under three wetting scenarios of primary drainage (PD), secondary imbibition (SI), and secondary drainage (SD). Limited sets of experiments were also conducted for a model glass-bead medium and for a soil. The measured interfacial areas were compared to interfacial areas measured using the standard IPTT method for liquid-liquid systems, which employs residual NW saturations. In addition, the theoretical maximum interfacial areas estimated from the measured data are compared to specific solid surface areas measured with the N2/BET method and estimated based on geometrical calculations for smooth spheres. Interfacial areas increase linearly with decreasing water saturation over the range of saturations employed. The maximum interfacial areas determined for the glass beads, which have no surface roughness, are 32±4 and 36±5 cm−1 for PD and SI cycles, respectively. The values are similar to the geometric specific solid surface area (31±2 cm−1) and the N2/BET solid surface area (28±2 cm−1). The maximum interfacial areas are 274±38, 235±27, and 581±160 cm−1 for the sand for PD, SI, and SD cycles, respectively, and ~7625 cm−1 for the soil for PD and SI. The maximum interfacial areas for the sand and soil are significantly larger than the estimated smooth-sphere specific solid surface areas (107±8 cm−1 and 152±8 cm−1, respectively), but much smaller than the N2/BET solid surface area (1387±92 cm−1 and 55224 cm−1, respectively). The NW-W interfacial areas measured with the two-phase flow method compare well to values measured using the standard IPTT method. PMID:28959079

A Community-Based Approach to Leading the Nation in Smart Energy Use

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2013-12-31

Project Objectives The AEP Ohio gridSMART® Demonstration Project (Project) achieved the following objectives: • Built a secure, interoperable, and integrated smart grid infrastructure in northeast central Ohio that demonstrated the ability to maximize distribution system efficiency and reliability and consumer use of demand response programs that reduced energy consumption, peak demand, and fossil fuel emissions. • Actively attracted, educated, enlisted, and retained consumers in innovative business models that provided tools and information reducing consumption and peak demand. • Provided the U.S. Department of Energy (DOE) information to evaluate technologies and preferred smart grid business models to be extended nationally. Projectmore » Description Ohio Power Company (the surviving company of a merger with Columbus Southern Power Company), doing business as AEP Ohio (AEP Ohio), took a community-based approach and incorporated a full suite of advanced smart grid technologies for 110,000 consumers in an area selected for its concentration and diversity of distribution infrastructure and consumers. It was organized and aligned around: • Technology, implementation, and operations • Consumer and stakeholder acceptance • Data management and benefit assessment Combined, these functional areas served as the foundation of the Project to integrate commercially available products, innovative technologies, and new consumer products and services within a secure two-way communication network between the utility and consumers. The Project included Advanced Metering Infrastructure (AMI), Distribution Management System (DMS), Distribution Automation Circuit Reconfiguration (DACR), Volt VAR Optimization (VVO), and Consumer Programs (CP). These technologies were combined with two-way consumer communication and information sharing, demand response, dynamic pricing, and consumer products, such as plug-in electric vehicles and smart appliances. In addition, the Project incorporated comprehensive cyber security capabilities, interoperability, and a data assessment that, with grid simulation capabilities, made the demonstration results an adaptable, integrated solution for AEP Ohio and the nation.« less

Nutritional behaviours of pregnant women in rural and urban environments.

PubMed

Suliga, Edyta

2015-01-01

Monitoring of the environmental differences in the mode of nutrition is especially important in pregnant women, for whom normal body weight gain is especially important for both the course of pregnancy and the normal development of the foetus, and is inseparably associated with rational nutrition. The objective of the study was evaluation of the mode of nutrition of pregnant women according to the place of residence. The investigation comprised 704 women. Information was collected by means of an anonymous survey concerning place of residence, consumption of selected products and beverages, and taking folic acid and other vitamin and/or mineral dietary supplements. In the urban environment, pregnant women more frequently consumed vegetables, milk and dairy products, sea fish and wholemeal cereal products, drank more liquids, as well as more fruit and/or vegetable juices, and more often used the supplementation with folic acid, even before becoming pregnant. No significant differences were found in the consumption of fruits, pulses, products which are the source of complete proteins, confectionery products and sweets, according to the place of residence. The diet of pregnant women from the rural environment compared to that of women from urban areas, was characterized by worse quality. It is necessary to carry out health education in the area of adequate nutrition among pregnant women, and those who plan pregnancy, directed primarily to all women from the rural environment.

Consumerism: The Past is Prologue

ERIC Educational Resources Information Center

Herrmann, Robert O.

1973-01-01

Without knowledge of past events, controversies, and historical figures we can have little appreciation of the forces that have shaped our history. In the area of consumer protection, this same historical perspective is required. Consumer protection requires a continuing effort, but it must be approached in an orderly fashion. (KP)

12 CFR Appendix I to Part 226 - Federal Enforcement Agencies

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Retail, Department Stores, Consumer Finance Companies, All Other Creditors, and All Nonbank Credit Card... Office in which they operate.) Division of Credit Practices, Bureau of Consumer Protection, Federal Trade.... Federal Credit Unions Regional office of the National Credit Union Administration serving the area in...

Acoustically Forced Coaxial Hydrogen/Liquid Oxygen Jet Flames

DTIC Science & Technology

2016-05-15

Briefing Charts 3. DATES COVERED (From - To) 25 April 2016 - 15 May 2016 4. TITLE AND SUBTITLE Acoustically Forced Coaxial Hydrogen / Liquid Oxygen Jet...area code) N/A Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. 239.18 1 Acoustically Forced Coaxial Hydrogen / Liquid Oxygen Jet Flames...propellants be stored in condensed form – e.g., kerosene, liquid oxygen in rockets • Combustion systems can no longer be designed to meet modern

Consumers' beliefs and behavioural intentions towards organic food. Evidence from the Czech Republic.

PubMed

Zagata, Lukas

2012-08-01

Research has revealed that organic consumers share beliefs about positive health effects, environmentally friendly production and better taste of organic food. Yet, very little is known about the decisions of organic consumers in post-socialist countries with emerging organic food markets. In order to examine this area a representative data set (N=1054) from the Czech Republic was used. Target group of the study has become the Czech consumers that purchase organic food on regular basis. The consumers' behaviour was conceptualised with the use of the theory of planned behaviour (ToPB). Firstly, the ToPB model was tested, and secondly, belief-based factors that influence the decisions and behaviour of consumers were explored. The theory proved able to predict and explain the behaviour of Czech organic consumers. The best predictors of the intention to purchase organic food are attitudes towards the behaviour and subjective norms. Decisive positions in consumers' beliefs have product- and process-based qualities. Copyright © 2012 Elsevier Ltd. All rights reserved.

A Review of Selected Literature on Stresses Affecting Soldiers in Combat

DTIC Science & Technology

1979-05-01

frequently been shown to enhance rather than degrade performance. The foregoing sampling of stress-related concepts is by no means intended to be...sufficient water for a day’s combat. Even in tanks, there is inadequate storage for consumable liquids. Therefore, during intense combat, or during periods...made for defecation or urination while wearing protective clothing. While this will not likely prove fatal, it can result in great personal distress

Trained and consumer panel evaluation of sparkling wines sweetened to brut or demi sec residual sugar levels with three different sugars.

PubMed

McMahon, Kenneth M; Diako, Charles; Aplin, Jesse; Mattinson, D Scott; Culver, Caleb; Ross, Carolyn F

2017-09-01

The dosage liquid, added at the final stage of sparkling wine production, imparts residual sweetness to the wine. No study has yet analyzed the influence of dosage composition on the final wine's sensory profile or consumer acceptance. In this study, dosage composition was altered through the addition of different sugar types (ST; fructose, glucose, or sucrose) to produce seven sparkling wines of varying residual sugar levels (RSL), including no sugar added, brut (5.3-8.4gST/L) or demi sec (34.9-37.8gST/L). As evaluated by a trained panel (n=9), the interaction between ST and RSL influenced the perception of caramelized/vanilla/honey (CVH) flavor, sweet taste, and sour taste attributes (p<0.05). Demi sec wines displayed lower intensities of green flavor, yeasty flavor, and sour taste compared to the no sugar added wine (p<0.05). Consumers (n=126) also evaluated the sparkling wines and ST, RSL, and their interaction influenced consumer acceptance of different attributes, as well as the perception of the "refreshing" aspect of the wine (p<0.05). Overall consumer acceptance of sparkling wines was highly correlated (r 2 ≤0.88) to CVH, floral, and fruity flavors, as well as sweet taste and creamy mouthfeel. External preference mapping revealed two clusters of consumers. Both consumer clusters liked wines sweetened with fructose, but Cluster 1 liked the demi sec sparkling wine sweetened with fructose (32.8g/L fructose) while Cluster 2 preferred the brut wine sweetened with fructose (8.4g/L fructose). These results suggest that consumer preference for sparkling wine was segmented based on sweetness preference. The results of this study offer winemakers knowledge about the influence of dosage composition on the sensory profile of sparkling wine. Copyright © 2017 Elsevier Ltd. All rights reserved.

Self-assembly of a surfactin nanolayer at solid-liquid and air-liquid interfaces.

PubMed

Onaizi, Sagheer A; Nasser, M S; Al-Lagtah, Nasir M A

2016-05-01

Surfactin, a sustainable and environmentally friendly surface active agent, is used as a model to study the adsorption of biosurfactants at hydrophobic and hydrophilic solid-liquid interfaces as well as the air-liquid interface. Surfactin adsorption was monitored as a function of time and concentration using surface plasmon resonance (SPR) technique in the case of the solid-liquid interfaces or the drop shape analysis (DSA) technique in the case of the air-liquid interface. The results obtained in this study showed that surfactin adsorption at the "hard" hydrophobic (functionalized with octadecanethiol) solid-liquid and the "soft" air-liquid interface were 1.12 ± 0.01 mg m(-2) (area per molecule of 157 ± 2 Å(2)) and 1.11 ± 0.05 mg m(-2) (area per molecule of 159 ± 7 Å(2)), respectively, demonstrating the negligible effect of the interface "hardness" on surfactin adsorption. The adsorption of surfactin at the hydrophilic (functionalized with β-mercaptoethanol) solid-liquid interface was about threefold lower than its adsorption at the hydrophobic-liquid interfaces, revealing the importance of hydrophobic interaction in surfactin adsorption process. The affinity constant of surfactin for the investigated interfaces follows the following order: air > octadecanethiol > β-mercaptoethanol. Biosurfactants, such as surfactin, are expected to replace the conventional fossil-based surfactants in several applications, and therefore the current study is a contribution towards the fundamental understanding of biosurfactant behavior, on a molecular level, at hydrophobic and hydrophilic solid-liquid interfaces in addition to the air-liquid interface. Such understanding might aid further optimization of the utilization of surfactin in a number of industrial applications such as enhanced oil recovery, bioremediation, and detergency.

Determination of polychlorinated biphenyls and polychlorinated dibenzo-p-dioxins and dibenzofurans by pressurized liquid extraction and gas chromatography coupled to mass spectrometry in street dust samples.

PubMed

Klees, Marcel; Hiester, Ernst; Bruckmann, Peter; Schmidt, Torsten C

2013-07-26

Owing to massive pollution with polychlorinated biphenyls in the harbour area of Dortmund (Germany), several dust samples were taken from surfaces at industrial sites and analyzed by the North-Rhine Westphalian State Agency for Nature, Environment, and Consumer Protection (LANUV NRW). This report describes and validates a rapid approach to screening for the presence of polychlorinated biphenyls (PCBs) in street dust. Samples were collected by using a natural bristle brush and stainless steel scoops. Mass recovery of fine-particle sea sand (a dust surrogate) on asphalt and concrete surfaces was used as a criterion for the effectiveness of sampling. Better recoveries of sea sand were achieved on concrete than on asphalt surfaces. Furthermore, temperature optimization for a pressurized liquid extraction (PLE) method used to extract PCBs and polychlorinated dibenzodioxins and polychlorinated furans (PCDD/Fs) from street dust samples was developed and compared with Soxhlet extraction for the analysis of PCBs in real street dust samples. Toluene was used as the extraction solvent in both cases. During this study, a combination of toluene and PLE achieved better extraction efficiencies than Soxhlet extraction. Finally, the performance of the PLE method was evaluated by analysing NIST Standard Reference Material 1649a for PCB and PCDD/F concentrations. This demonstrated that the accuracy of the PLE method for the determination of both substance classes was satisfactory. In addition, concentrations of PCBs and PCDD/Fs in street dust samples from industrial sites are reported. Copyright © 2013. Published by Elsevier B.V.

A new simple and rapid LC-ESI-MS/MS method for quantification of plasma oxysterols as dimethylaminobutyrate esters. Its successful use for the diagnosis of Niemann-Pick type C disease.

PubMed

Boenzi, Sara; Deodato, Federica; Taurisano, Roberta; Martinelli, Diego; Verrigni, Daniela; Carrozzo, Rosalba; Bertini, Enrico; Pastore, Anna; Dionisi-Vici, Carlo; Johnson, David W

2014-11-01

Two oxysterols, cholestan-3β,5α,6β-triol (C-triol) and 7-ketocholesterol (7-KC), have been recently proposed as diagnostic markers of Niemann-Pick type C (NP-C) disease, representing a potential alternative diagnostic tool to the more invasive and time consuming filipin test in cultured fibroblasts. Usually, the oxysterols are detected and quantified by liquid chromatography-tandem mass spectrometry (LC-MS/MS) method using atmospheric pressure chemical ionization (APCI) or electro-spray-ionization (ESI) sources, after a variety of derivatization procedures to enhance sensitivity. We developed a sensitive LC-MS/MS method to quantify the oxysterols in plasma as dimethylaminobutyrate ester, suitable for ESI analysis. This method, with an easy liquid-phase extraction and a short derivatization procedure, has been validated to demonstrate specificity, linearity, recovery, lowest limit of quantification, accuracy and precision. The assay was linear over a concentration range of 0.5-200ng/mL for C-triol and 1.0-200ng/mL for 7-KC. Intra-day and inter-day coefficients of variation (CV%) were <15% for both metabolites. Receiver operating characteristic analysis estimates that the area under curve was 0.998 for C-triol, and 0.972 for 7-KC, implying a significant discriminatory power for the method in this patient population of both oxysterols. In summary, our method provides a simple, rapid and non-invasive diagnostic tool for the biochemical diagnosis of NP-C disease. Copyright © 2014 Elsevier B.V. All rights reserved.

Distribution of peanut allergen in the environment.

PubMed

Perry, Tamara T; Conover-Walker, Mary Kay; Pomés, Anna; Chapman, Martin D; Wood, Robert A

2004-05-01

Patients with peanut allergy can have serious reactions to very small quantities of peanut allergen and often go to extreme measures to avoid potential contact with this allergen. The purpose of this study was to detect peanut allergen under various environmental conditions and examine the effectiveness of cleaning agents for allergen removal. A monoclonal-based ELISA for Arachis hypogaea allergen 1 (Ara h 1; range of detection, 30-2000 ng/mL) was used to assess peanut contamination on cafeteria tables and other surfaces in schools, the presence of residual peanut protein after using various cleaning products on hands and tabletops, and airborne peanut allergen during the consumption of several forms of peanut. After hand washing with liquid soap, bar soap, or commercial wipes, Ara h 1 was undetectable. Plain water and antibacterial hand sanitizer left detectable Ara h 1 on 3 of 12 and 6 of 12 hands, respectively. Common household cleaning agents removed peanut allergen from tabletops, except dishwashing liquid, which left Ara h 1 on 4 of 12 tables. Of the 6 area preschools and schools evaluated, Ara h 1 was found on 1 of 13 water fountains, 0 of 22 desks, and 0 of 36 cafeteria tables. Airborne Ara h 1 was undetectable in simulated real-life situations when participants consumed peanut butter, shelled peanuts, and unshelled peanuts. The major peanut allergen, Ara h 1, is relatively easily cleaned from hands and tabletops with common cleaning agents and does not appear to be widely distributed in preschools and schools. We were not able to detect airborne allergen in many simulated environments.

Methylisothiazolinone in rinse-off products causes allergic contact dermatitis: a repeated open-application study.

PubMed

Yazar, K; Lundov, M D; Faurschou, A; Matura, M; Boman, A; Johansen, J D; Lidén, C

2015-07-01

In recent years, the prevalence of contact allergy to the preservative methylisothiazolinone (MI) has increased dramatically. Cosmetic products are one of the major sources of exposure. To examine whether allowed concentrations of MI in cosmetic rinse-off products have the potential to cause allergic contact dermatitis. Nineteen MI-allergic subjects and 19 controls without MI allergy applied two liquid hand soaps five times per day on areas of 5 × 10 cm(2) on the ventral side of their forearms. One soap contained 100 ppm MI, the maximum allowed concentration in cosmetics, and was used by 10 allergic subjects and all controls. Another liquid soap with 50 ppm MI was used by nine allergic subjects. As the negative control, all subjects used a similar soap that did not contain MI. The repeated open applications proceeded until a positive reaction occurred or up to 21 days. The study was conducted in a randomized and blinded fashion. Ten out of 10 MI-allergic subjects developed positive reactions to the soap with 100 ppm and seven out of nine reacted to the 50 ppm soap, while none of the 19 controls had a positive reaction during 21 days of application. No reactivity was seen to the soap without MI. The difference in reactivity to MI between MI-allergic subjects and controls was statistically significant (Fisher's exact test, P ˂ 0.0001). Rinse-off products preserved with 50 ppm MI or more are not safe for consumers. No safe level has yet been identified. © 2015 British Association of Dermatologists.

Levels of organochlorine pesticide residues in butter samples collected from the Black Sea Region of Turkey.

PubMed

Aksoy, Abdurrahman; Dervisoglu, Muhammed; Guvenc, Dilek; Gul, Osman; Yazici, Fehmi; Atmaca, Enes

2013-01-01

The aim of the present study was to evaluate the levels of 9 organochlorine compounds (aldrin, hexachlorobenzene, 2,4-DDE, 4,4-DDE, 2,4-DDT, 4,4-DDT, and α-, β-, and γ-HCH) in butter samples collected in the Eastern, Middle and Western Black Sea Regions of Turkey between October 2009 and June 2010. The liquid-liquid extraction method was used to extract the organochlorine compounds from the samples and the measurements were performed by using a gas chromatograph-electron capture detector system. DDT metabolites, aldrin, hexachlorobenzene (HCB), and α-, and γ-HCH were not detected in the samples but β-HCH was detected in 3 of a total of 88 samples. In the first period, only one sample from the West Black Sea Region was β-HCH positive (0.014 mg kg(-1)). The other β-HCH positive samples collected in Middle and West Black Sea Regions in the second period had a concentration of 0.066 and 0.019 mg kg(-1), respectively. All concentrations of the detected compounds exceeded the legal limits of 0.003 mg kg(-1) for β-HCH, as prescribed by the Turkish Food Codex, and therefore pose a potential health risk for consumers. The contamination detected is most likely due to the past usage of β-HCH in agriculture and its long term persistence in the environment. These results strongly suggest that further research should be focused on the detection of pesticide residues in agricultural areas across the nation.

5 CFR 351.605 - Liquidation provisions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FORCE Release From Competitive Level § 351.605 Liquidation provisions. When an agency will abolish all positions in a competitive area within 180 days, it must release employees in group and subgroup order...

5 CFR 351.605 - Liquidation provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... FORCE Release From Competitive Level § 351.605 Liquidation provisions. When an agency will abolish all positions in a competitive area within 180 days, it must release employees in group and subgroup order...

Actuating materials. Voxelated liquid crystal elastomers.

PubMed

Ware, Taylor H; McConney, Michael E; Wie, Jeong Jae; Tondiglia, Vincent P; White, Timothy J

2015-02-27

Dynamic control of shape can bring multifunctionality to devices. Soft materials capable of programmable shape change require localized control of the magnitude and directionality of a mechanical response. We report the preparation of soft, ordered materials referred to as liquid crystal elastomers. The direction of molecular order, known as the director, is written within local volume elements (voxels) as small as 0.0005 cubic millimeters. Locally, the director controls the inherent mechanical response (55% strain) within the material. In monoliths with spatially patterned director, thermal or chemical stimuli transform flat sheets into three-dimensional objects through controlled bending and stretching. The programmable mechanical response of these materials could yield monolithic multifunctional devices or serve as reconfigurable substrates for flexible devices in aerospace, medicine, or consumer goods. Copyright © 2015, American Association for the Advancement of Science.