Redesign of solid rocket booster/external tank attachment ring for the space transportation system

NASA Technical Reports Server (NTRS)

Mccomb, Harvey G., Jr. (Compiler)

1987-01-01

An improved design concept is presented for the Space Shuttle solid rocket booster (SRB)/external tank (ET) attachment ring structural component. This component picks up three struts which attach the aft end of each SRB to the ET. The concept is a partial ring with carefully tapered ends to distribute fastener loads safely into the SRB. Extensive design studies and analyses were performed to arrive at the concept. Experiments on structural elements were performed to determine material strength and stiffness characteristics. Materials and fabrication studies were conducted to determine acceptable tolerances for the design concept. An overview is provided of the work along with conclusions and major recommendations.

Materials Processing Research and Development

DTIC Science & Technology

2001-11-01

interface between a Ti-6Al-4V workpiece and H13 tool steel die for various combinations of lubricants and workpiece-die temperatures. The ring test was...attaching a type-K thermocouple to the sample. The samples at 400 °C were heated using band heaters attached to H13 tool steel dies, with the...Ring Tests The ring tests were performed on a 200 kip servo-hydraulic press between H13 tool steel dies heated to the prescribed die temperatures of

Hermetically sealable package for hybrid solid-state electronic devices and the like

NASA Technical Reports Server (NTRS)

Miller, Wilson N. (Inventor); Gray, Ormal E. (Inventor)

1988-01-01

A light-weight, inexpensively fabricated, hermetically sealable, repairable package for small electronic or electromechanical units, having multiple connections, is described. A molded ring frame of polyamide-imide plastic (Torlon) is attached along one edge to a base plate formed of a highly heat conducting material, such as aluminum or copper. Bores are placed through a base plate within the area of the edge surface of ring frame which result in an attachment of the ring frame to the base plate during molding. Electrical leads are molded into the ring frame. The leads are L-shaped gold-plated copper wires imbedded within widened portions of the side wall of the ring frame. Within the plastic ring frame wall the leads are bent (typically, though not necessarily at 90 deg) so that they project into the interior volume of the ring frame for connection to the solid state devices.

CHEMISTRY OF OXIDATION OF POLYCYCLIC AROMATIC HYDROCARBONS BY SOIL PSEUDOMONADS

PubMed Central

Rogoff, Martin H.

1962-01-01

Rogoff, Martin H. (U.S. Bureau of Mines, Pittsburgh, Pa.). Oxidation of polycyclic aromatic hydrocarbons by soil pseudomonads. J. Bacteriol. 83:998–1004. 1962.—Substitution of phenanthrene by a methyl group at the 9-carbon blocks oxidation of the compound by a resting-cell suspension of a phenanthrene-grown soil pseudomonad. When 2-methylphenanthrene is provided, the oxidation rate is considerably higher; 3-methylphenanthrene is oxidized at a rate intermediate between the other two, even though the methyl group is attached to a carbon directly involved in ring splitting. Cells grown on naphthalene or anthracene oxidize phenanthrene at a much lower rate than cells grown with phenanthrene or 2-methylnaphthalene as the source of carbon. Naphthalene-grown cells also absorb less phenanthrene from aqueous solution than do their phenanthrene-grown counterparts. The data are in keeping with the hypothesis that polynuclear aromatic hydrocarbons attach to the relevant bacterial enzymes at carbon-carbon bonds of high electron density (K regions; localized double bonds), and that the ring-splitting reactions then occur at other bonds on the substrate molecule. The actual bond that undergoes fission is determined by the electronic and steric configurations of the enzyme-substrate complex. When linearly arranged aromatic compounds such as naphthalene or anthracene are attacked, attachment to an enzyme and ring splitting may take place on the same ring; angular aromatic compounds such as phenanthrene afford attachment to an enzyme at a bond in a ring other than the one containing the ring-splitting site. PMID:14493381

An evaluation of the spring finger solder joints on SA1358-10 and SA2052-4 connector assemblies (MC3617,W87).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilgo, Alice C.; Vianco, Paul Thomas; Hlava, Paul Frank

2006-08-01

The SA1358-10 and SA2052-4 circular JT Type plug connectors are used on a number of nuclear weapons and Joint Test Assembly (JTA) systems. Prototype units were evaluated for the following specific defects associated with the 95Sn-5Sb (Sn-Sb, wt.%) solder joint used to attach the beryllium-copper (BeCu) spring fingers to the aluminum (Al) connector shell: (1) extended cracking within the fillet; (2) remelting of the solder joint during the follow-on, soldering step that attached the EMR adapter ring to the connector shell (and/or soldering the EMR shell to the adapter ring) that used the lower melting temperature 63Sn-37Pb (Sn-Pb) alloy; andmore » (3) spalling of the Cd (Cr) layer overplating layer from the fillet surface. Several pedigrees of connectors were evaluated, which represented older fielded units as well as those assemblies that were recently constructed at Kansas City Plant. The solder joints were evaluated that were in place on connectors made with the current soldering process as well as an alternative induction soldering process for attaching the EMR adapter ring to the shell. Very similar observations were made, which crossed the different pedigrees of parts and processes. The extent of cracking in the top side fillets varied between the different connector samples and likely the EMR adapter ring to the shell. Very similar observations were made, which crossed the different pedigrees of parts and processes. The extent of cracking in the top side fillets varied between the different connector samples and likely reflected the different extents to which the connector was mated to its counterpart assembly. In all cases, the spring finger solder joints on the SA1358-10 connectors were remelted as a result of the subsequent EMR adapter ring attachment process. Spalling of the Cd (Cr) overplating layer was also observed for these connectors, which was a consequence of the remelting activity. On the other hand, the SA2052-4 connector did not exhibit evidence of remelting of the spring finger solder joint. The Cd (Cr) layer did not show signs of spalling. These results suggested that, due to the size of the SA1358-10 connector, any of the former or current soldering processes used to attach the EMR adapter ring and/or EMR shell to the connector shell, requires a level of heat energy that will always result in the remelting of the spring finger solder joint attached with either the Sn-Ag or the Sn-Sb alloy. Lastly, it was construed that the induction soldering process, which is used to attach the EMR adapter ring onto the shell, was more likely to have caused the remelting event rather than the more localized heat source of the hand soldering iron used to attach the EMR shell to the adapter ring.« less

Passive Vibration Control of Airborne Equipment using a Circular Steel Ring

NASA Technical Reports Server (NTRS)

Ellison, Joseph; Ahmadi, Goodarz; Kehoe, Mike

1997-01-01

Vibration isolation is needed to protect avionics equipment from adverse aircraft vibration environments. Passive isolation is the simplest means to achieve this goal. The system used here consists of a circular steel ring with a lump mass on top and exposed to base excitation. Sinusoidal and filtered zero-mean Gaussian white noise are used to excite the structure and the acceleration response spectra at the top of the ring are computed. An experiment is performed to identify the natural frequencies and modal damping of the circular ring. Comparison is made between the analytical and experimental results and good agreement is observed. The ring response is also evaluated with a concentrated mass attached to the top of the ring. The effectiveness of the ring in isolating the equipment from base excitation is studied. The acceleration response spectra of a single degree of freedom system attached to the top of the ring are evaluated and the results are compared with those exposed directly to the base excitation. It is shown that a properly designed ring could effectively protect the avionics from possible damaging excitation levels.

Finite element analysis to compare complete denture and implant-retained overdentures with different attachment systems.

PubMed

Barão, Valentim Adelino Ricardo; Assunção, Wirley Gonçalves; Tabata, Lucas Fernando; Delben, Juliana Aparecida; Gomes, Erica Alves; de Sousa, Edson Antonio Capello; Rocha, Eduardo Passos

2009-07-01

This finite element analysis compared stress distribution on complete dentures and implant-retained overdentures with different attachment systems. Four models of edentulous mandible were constructed: group A (control), complete denture; group B, overdenture retained by 2 splinted implants with bar-clip system; group C, overdenture retained by 2 unsplinted implants with o'ring system; and group D, overdenture retained by 2 splinted implants with bar-clip and 2 distally placed o'ring system. Evaluation was performed on Ansys software, with 100-N vertical load applied on central incisive teeth. The lowest maximum general stress value (in megapascal) was observed in group A (64.305) followed by groups C (119.006), D (258.650), and B (349.873). The same trend occurred in supporting tissues with the highest stress value for cortical bone. Unsplinted implants associated with the o'ring attachment system showed the lowest maximum stress values among all overdenture groups. Furthermore, o'ring system also improved stress distribution when associated with bar-clip system.

A three-dimensional finite element analysis for overdenture attachments supported by teeth and/or mini dental implants.

PubMed

Fatalla, Abdalbseet A; Song, Ke; Du, Tianfeng; Cao, Yingguang

2012-12-01

The aim of this study was to establish the optimum design and attachment combination to support an overdenture with minimal stress and flexing produced in the alveolar bone surrounding any natural teeth and/or mini dental implants. Twelve models were included in the study: the six main models (A, B, C, D, E, and F) were categorized according to the support designs of the overdenture prosthesis, and each model was further subdivided according to the attachment combinations into model 1: with Dalbo elliptic and/or O-ring attachments only and model 2: with flexible acrylic attachments. Vertical loads (35 N) and 17.5 N lateral loads under static conditions were applied to the models to simulate the occlusal forces following the concept of lingualized occlusion. All conditions were created using a finite element software program. Maximum von Mises stress at the level of the attachments and at the bone support foundation interfaces were compared in all 12 models. The flexing of the mandible and the attachments were also compared qualitatively. Stress on these models was analyzed after the given loading condition. The results showed that the model with three freestanding mini dental implants and flexible acrylic attachments showed the lowest von Mises stress and flexing, while the models with four freestanding mini dental implants and O-ring attachments showed the highest von Mises stress. Three freestanding mini dental implants with flexible acrylic attachment systems supporting an overdenture were better choices than four mini dental implants with O-ring attachment systems, which showed the maximum flexing and stress values in this qualitative comparison. © 2012 by the American College of Prosthodontists.

On the mechanism of the ring zone effect obtained with the mixed haemadsorption technique

PubMed Central

Jonsson, J.; Fagraeus, Astrid

1969-01-01

A ring zone effect noted with the radial diffusion disc test modification of the mixed haemadsorption technique has been studied using human anti-thyroid sera reacting with thyroid monolayer cultures. Results are presented which suggest that the `empty' centre of the ring zones is due to an excess of attached antibody. Sera giving the ring zone effect contain a larger number of antibody specificities than those producing filled zones. The appearance of ring zones is favoured by a low density of antigens on the culture. These findings and a number of synergistic effects produced by mixing ring and filled zone reactions are compatible with the hypothesis that the ring zone is produced when several antibodies of different specificities react with restricted antigenic areas carrying densely located clusters of antigenic determinants representing the different specificities contained in the ring zone sera. The crowding of antibodies on the clusters in the centre of the ring zones creates a steric hindrance for the indicator cells so that they are not firmly attached in this area. The antibody zone is therefore indicated as a peripheral haemadsorption ring. ImagesFIG. 1FIG. 2FIG. 4FIG. 6FIG. 7FIG. 9 PMID:5307718

Use of tear ring permits repair of sealed module circuitry

NASA Technical Reports Server (NTRS)

1965-01-01

Improved packaging technique for modular electronic circuitry utilizes a tear ring which may be removed for repair and resealed. The tear ring is put over the container and header to which the electronic circuit assembly has been attached.

Stress analysis in oral obturator prostheses, part II: photoelastic imaging

NASA Astrophysics Data System (ADS)

Pesqueira, Aldiéris Alves; Goiato, Marcelo Coelho; da Silva, Emily Vivianne Freitas; Haddad, Marcela Filié; Moreno, Amália; Zahoui, Abbas; dos Santos, Daniela Micheline

2014-06-01

In part I of the study, two attachment systems [O-ring; bar-clip (BC)] were used, and the system with three individualized O-rings provided the lowest stress on the implants and the support tissues. Therefore, the aim of this study was to assess the stress distribution, through the photoelastic method, on implant-retained palatal obturator prostheses associated with different attachment systems: BOC-splinted implants with a bar connected to two centrally placed O-rings, and BOD-splinted implants with a BC connected to two distally placed O-rings (cantilever). One photoelastic model of the maxilla with oral-sinus-nasal communication with three parallel implants was fabricated. Afterward, two implant-retained palatal obturator prostheses with the two attachment systems described above were constructed. Each assembly was positioned in a circular polariscope and a 100-N axial load was applied in three different regions with implants by using a universal testing machine. The results were obtained through photograph record analysis of stress. The BOD system exhibited the highest stress concentration, followed by the BOC system. The O-ring, centrally placed on the bar, allows higher mobility of the prostheses and homogeneously distributes the stress to the region of the alveolar ridge and implants. It can be concluded that the use of implants with O-rings, isolated or connected with a bar, to rehabilitate maxillectomized patients allows higher prosthesis mobility and homogeneously distributes the stress to the alveolar ridge region, which may result in greater chewing stress distribution to implants and bone tissue. The clinical implication of the augmented bone support loss after maxillectomy is the increase of stress in the attachment systems and, consequently, a higher tendency for displacement of the prosthesis.

Retention and wear behaviors of two implant overdenture stud-type attachments at different implant angulations.

PubMed

Choi, Jae-Won; Bae, Ji-Hyeon; Jeong, Chang-Mo; Huh, Jung-Bo

2017-05-01

Implant angulation should be considered when selecting an attachment. Some in vitro studies have investigated the relationship between implant angulation and changes in the retention force of the stud attachment, but few studies have evaluated the effect of cyclic loading and repeated cycles of insertion and removal on the stud attachment. The purpose of this in vitro study was to evaluate the effects of implant angulation on the retentive characteristics of overdentures with 2 different stud attachments, an experimental system and O-rings in red and orange, after cyclic loading and repeated insertion and removal cycles. The canine region of a mandibular experimental model was fitted with 2 implant fixtures with 2 different stud attachment systems at implant angulations of 0, 15, or 30 degrees. A mastication simulator was used to simulate cyclic loading, and a universal testing machine was used to evaluate retentive force changes after repeated insertion and removal cycles. To simulate the numbers of mastication and insertion and removal cycles per annum, 400000 cyclic loadings and 1080 insertion and removal cycles were performed. Wear patterns and attachment surface deformations were evaluated by scanning electron microscopy. Data were analyzed using the Kruskal-Wallis test, Mann-Whitney U test with Bonferroni correction (α=.05/3=.017), and the paired-sample Student t test (α=.05). When retentive forces before and after testing were compared, O-ring showed significant retention loss at all implant angulations (P<.001). In contrast, the experimental system showed little retention loss in the 0- and 15-degree models (P>.05), whereas the 30-degree model showed a significant increase in retentive force (P=.001). At all implant angulations, retention loss increased significantly for the orange O-ring, followed by the red O-ring, and the experimental system (P<.001). Scanning electron microscopy analysis showed more intense wear in the matrix than the patrix (abutment that matches to matrix) and more severe wear and deformation of the O-ring rubber matrix than of the experimental zirconia ball. Upon completion of the experiment, wear and deformation were found for all attachment systems. Even when implants are not installed in parallel, the experimental system can be used without involving great loss of retention. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

49 CFR 179.400-9 - Stiffening rings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Stiffening rings. 179.400-9 Section 179.400-9... on each side of the attachment of the stiffening ring is given by the following formula: W = 0.78(Rt)0.5 Where: W = width of jacket effective on each side of the stiffening ring, in inches; R = outside...

Transport electron through a quantum wire by side-attached asymmetric quantum-dot rings

NASA Astrophysics Data System (ADS)

Rostami, A.; Zabihi, S.; Rasooli S., H.; Seyyedi, S. K.

2011-12-01

The electronic conductance at zero temperature through a quantum wire with side-attached asymmetric quantum ring (as a scatter system) is theoretically studied using the non-interacting Anderson tunneling Hamiltonian method. We show that the asymmetric configuration of QD- scatter system strongly impresses the amplitude and spectrum of quantum wire nanostructure transmission characteristics. It is shown that whenever the balanced number of quantum dots in two rings is substituted by unbalanced scheme, the number of forbidden mini-bands in quantum wire conductance increases and QW-nanostructure electronic conductance contains rich spectral properties due to appearance of the new anti-resonance and resonance points in spectrum. Considering the suitable gap between nano-rings can strengthen the amplitude of new resonant peaks in the QW conductance spectrum. The proposed asymmetric quantum ring scatter system idea in this paper opens a new insight on designing quantum wire nano structure for given electronic conductance.

Lateral ring metal elastic wheel absorbs shock loading

NASA Technical Reports Server (NTRS)

Galan, L.

1966-01-01

Lateral ring metal elastic wheel absorbs practically all shock loading when operated over extremely rough terrain and delivers only a negligible shock residue to associated suspension components. The wheel consists of a rigid aluminum assembly to which lateral titanium ring flexible elements with treads are attached.

Surgical anatomy and morphologic variations of umbilical structures.

PubMed

Fathi, Amir H; Soltanian, Hooman; Saber, Alan A

2012-05-01

The umbilicus is the main access route to the abdominal cavity in laparoscopic surgeries. However, its anatomical configuration is rarely studied in the surgical and anatomical literature. With introduction of laparoendoscopic single-site surgery and considering the significant number of primary and postoperative umbilical hernias, we felt the necessity to comprehensively study the umbilical structures and analyze their protective function against hernias. Twenty-four embalmed cadavers were studied in the anatomy laboratory of Case Western Reserve University. Round hepatic, median and medial ligaments, umbilical ring, umbilical and umbilicovesicular fasciae, and pattern of attachment to the ring were dissected and measured. Mean age was 82.1 years, ranging between 56 and 96 years, with a male-to-female ratio of 1.4:1. Ninety-two per cent was white and 8 per cent black adults. According to shape and attachment pattern of ligaments, umbilical ring is classified into five types. Hernia incidence was 25 per cent. All hernia cases lacked the umbilical fascia and the round hepatic ligament was not attached to the inferior border of the ring. The umbilical ring and its morphologic relation with adjacent ligaments are described and classified into five types. In contrary to sparse existing literature, we propose that umbilical fascia is continuation and condensation of umbilicovesicular rather than transversalis fascia. It was absent in cadavers forming conjoined median and medial ligaments with a single insertion site to the ring. Round ligament insertion to the inferior border of the ring provides another protective factor. These two protective measures were absent in all the observed umbilical hernias.

Helmet latching and attaching ring

NASA Technical Reports Server (NTRS)

Chase, E. W.; Viikinsalo, S. J. (Inventor)

1970-01-01

A neck ring releasably secured to a pressurized garment carries an open-ended ring normally in the engagement position fitted into an annular groove and adapted to fit into a complementary annular groove formed in a helmet. Camming means formed on the inner surface at the end of the helmet engages the open-ended ring to retract the same and allow for one motion donning even when the garment is pressurized. A projection on the end of the split ring is engageable to physically retract the split ring.

Helmet of a laminate construction of polycarbonate and polysulfone polymeric material

NASA Technical Reports Server (NTRS)

Kosmo, Joseph J. (Inventor); Dawn, Frederic S. (Inventor)

1991-01-01

An article of laminate construction is disclosed which is comprised of an underlayer of polycarbonate polymer material to which is applied a chemically resistant outer layer of polysulfone. The layers which are joined by compression-heat molding, are molded to form the shape of a body protective shell such as a space helmet comprising a shell of polycarbonate, polysulfone laminate construction attached at its open end to a sealing ring adapted for connection to a space suit. The front portion of the shell provides a transparent visor for the helmet. An outer visor of polycarbonate polysulfone laminate construction is pivotally mounted to the sealing ring for covering the transparent visor portion of the shell during extravehicular activities. The polycarbonate under layer of the outer visor is coated on its inner surface with a vacuum deposit of gold to provide additional thermal radiation resistance.

Filament wound data base development, revision 1, appendix A

NASA Technical Reports Server (NTRS)

Sharp, R. Scott; Braddock, William F.

1985-01-01

Data are presented in tabular form for the High Performance Nozzle Increments, Filament Wound Case (FWC) Systems Tunnel Increments, Steel Case Systems Tunnel Increments, FWC Stiffener Rings Increments, Steel Case Stiffener Rings Increments, FWC External Tank (ET) Attach Ring Increments, Steel Case ET Attach Ring Increments, and Data Tape 8. The High Performance Nozzle are also presented in graphical form. The tabular data consist of six-component force and moment coefficients as they vary with angle of attack at a specific Mach number and roll angle. The six coefficients are normal force, pitching moment, side force, yawing moment, axial force, and rolling moment. The graphical data for the High Performance Nozzle Increments consist of a plot of a coefficient increment as a function of angle of attack at a specific Mach number and at a roll angle of 0 deg.

Face seal assembly for rotating drum

DOEpatents

Morgan, J. Giles; Rennich, Mark J.; Whatley, Marvin E.

1982-01-01

A seal assembly comprises a tube rotatable about its longitudinal axis and having two longitudinally spaced flanges projecting radially outwardly from the outer surface thereof. Slidably positioned against one of the flanges is a seal ring, and disposed between this seal ring and the other flange are two rings that are forced apart by springs, one of the latter rings being attached to a flexible wall.

Optical bio-chemical sensors on SNOW ring resonators.

PubMed

Khorasaninejad, Mohammadreza; Clarke, Nigel; Anantram, M P; Saini, Simarjeet Singh

2011-08-29

In this paper, we propose and analyze novel ring resonator based bio-chemical sensors on silicon nanowire optical waveguide (SNOW) and show that the sensitivity of the sensors can be increased by an order of magnitude as compared to silicon-on-insulator based ring resonators while maintaining high index contrast and compact devices. The core of the waveguide is hollow and allows for introduction of biomaterial in the center of the mode, thereby increasing the sensitivity of detection. A sensitivity of 243 nm/refractive index unit (RIU) is achieved for a change in bulk refractive index. For surface attachment, the sensor is able to detect monolayer attachments as small as 1 Å on the surface of the silicon nanowires.

Optical bio-chemical sensors on SNOW ring resonators

NASA Astrophysics Data System (ADS)

Khorasaninejad, Mohammadreza; Clarke, Nigel; Anantram, M. P.; Singh Saini, Simarjeet

2011-08-01

In this paper, we propose and analyze novel ring resonator based bio-chemical sensors on silicon nanowire optical waveguide (SNOW) and show that the sensitivity of the sensors can be increased by an order of magnitude as compared to silicon-on-insulator based ring resonators while maintaining high index contrast and compact devices. The core of the waveguide is hollow and allows for introduction of biomaterial in the center of the mode, thereby increasing the sensitivity of detection. A sensitivity of 243 nm/refractive index unit (RIU) is achieved for a change in bulk refractive index. For surface attachment, the sensor is able to detect monolayer attachments as small as 1 Å on the surface of the silicon nanowires.

The Ndc80 complex bridges two Dam1 complex rings

PubMed Central

Kim, Jae ook; Zelter, Alex; Umbreit, Neil T; Bollozos, Athena; Riffle, Michael; Johnson, Richard; MacCoss, Michael J; Asbury, Charles L; Davis, Trisha N

2017-01-01

Strong kinetochore-microtubule attachments are essential for faithful segregation of sister chromatids during mitosis. The Dam1 and Ndc80 complexes are the main microtubule binding components of the Saccharomyces cerevisiae kinetochore. Cooperation between these two complexes enhances kinetochore-microtubule coupling and is regulated by Aurora B kinase. We show that the Ndc80 complex can simultaneously bind and bridge across two Dam1 complex rings through a tripartite interaction, each component of which is regulated by Aurora B kinase. Mutations in any one of the Ndc80p interaction regions abrogates the Ndc80 complex’s ability to bind two Dam1 rings in vitro, and results in kinetochore biorientation and microtubule attachment defects in vivo. We also show that an extra-long Ndc80 complex, engineered to space the two Dam1 rings further apart, does not support growth. Taken together, our work suggests that each kinetochore in vivo contains two Dam1 rings and that proper spacing between the rings is vital. DOI: http://dx.doi.org/10.7554/eLife.21069.001 PMID:28191870

Nuclear reactor fuel assembly duct-tube-to-handling-socket attachment system

DOEpatents

Christiansen, David W.; Smith, Bob G.

1982-01-01

A reusable system for removably attaching the upper end 10of a nuclear reactor duct tube to the lower end 30 of a nuclear reactor fuel assembly handling socket. A transition ring 20, fixed to the duct tube's upper end 10, has an interior-threaded section 22 with a first locking hole segment 24. An adaptor ring 40, fixed to the handling socket's lower end 30 has an outside-threaded section 42 with a second locking hole segment 44. The inside 22 and outside 42 threaded sections match and can be joined so that the first 24 and second 44 locking hole segments can be aligned to form a locking hole. A locking ring 50, with a locking pin 52, slides over the adaptor ring 40 so that the locking pin 52 fits in the locking hole. A swage lock 60 or a cantilever finger lock 70 is formed from the locking cup collar 26 to fit in a matching groove 54 or 56 in the locking ring 50 to prevent the locking ring's locking pin 52 from backing out of the locking hole.

Photoelastic analysis to compare implant-retained and conventional obturator dentures

NASA Astrophysics Data System (ADS)

Goiato, Marcelo Coelho; Prado Ribeiro, Paula do; Pellizzer, Eduardo Piza; Pesqueira, Aldiéris Alves; Haddad, Marcela Filiè; dos Santos, Daniela Micheline; Moreno, Amália

2012-06-01

The use of photoelastic analysis contributes to the rehabilitation of patients with oral-sinus-nasal sequelae, which in turn affect important functions such as chewing, swallowing, and speech. The prosthetic rehabilitation with implant-retained dentures is a suitable treatment option. The purpose of this study was to verify, by using a photoelastic analysis, the stress distribution in implant-retained palatal obturator dentures (relined or not) associated with different attachment systems (O-ring, bar-clip, and bar-clip associated with distally placed O-rings). Two photoelastic models were obtained from an experimental maxillary cast presenting an oral-nasal communication. One model had two 13-mm length implants placed on the left region. A total of eight colorless maxillary obturators were fabricated and subsequently four of them were relined with soft silicone soft, and three had attachment systems associated. The assembly (model/attachment system/prosthesis) was positioned in a circular polariscope and a 100-N load was applied at 10 mm/s. The results showed that the denture relining influenced the distribution and amount of stress on the models. The O-ring group displayed the lowest stress levels, followed by bar-clip system associated with distally placed O-rings and bar-clip groups.

42 CFR 84.151 - Harness test; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... withstand a pull of 113 kg. (250 pounds) for 30 minutes without failure. (2) Belts, rings, and attachments... minutes without separating, and the hose attachments shall be arranged so that the pull or drag of the... attachment of the line shall permit dragging the maximum length of hose considered for approval over a...

Parkin, A Top Level Manager in the Cell’s Sanitation Department

PubMed Central

Rankin, Carolyn A; Roy, Ambrish; Zhang, Yang; Richter, Mark

2011-01-01

Parkin belongs to a class of multiple RING domain proteins designated as RBR (RING, in between RING, RING) proteins. In this review we examine what is known regarding the structure/function relationship of the Parkin protein. Parkin contains three RING domains plus a ubiquitin-like domain and an in-between-RING (IBR) domain. RING domains are rich in cysteine amino acids that act as ligands to bind zinc ions. RING domains may interact with DNA or with other proteins and perform a wide range of functions. Some function as E3 ubiquitin ligases, participating in attachment of ubiquitin chains to signal proteasome degradation; however, ubiquitin may be attached for purposes other than proteasome degradation. It was determined that the C-terminal most RING, RING2, is essential for Parkin to function as an E3 ubiquitin ligase and a number of substrates have been identified. However, Parkin also participates in a number of other fiunctions, such as DNA repair, microtubule stabilization, and formation of aggresomes. Some functions, such as participation in a multi-protein complex implicated in NMDA activity at the post synaptic density, do not require ubiquitination of substrate molecules. Recent observations of RING proteins suggest their function may be regulated by zinc ion binding. We have modeled the three RING domains of Parkin and have identified a new set of RING2 ligands. This set allows for binding of two rather than just one zinc ion, opening the possibility that the number of zinc ions bound acts as a molecular switch to modulate Parkin function. PMID:21633666

(E)-1-(Pyridin-2-yl)-3-(3,4,5-trimeth­oxy­phen­yl)prop-2-en-1-one

PubMed Central

Fun, Hoong-Kun; Suwunwong, Thitipone; Chantrapromma, Suchada

2011-01-01

In the title heteroaryl chalcone derivative, C17H17NO4, the dihedral angle between the pyridine and benzene rings is 10.82 (5)°. The two meth­oxy groups at the meta positions are essentially coplanar with the attached benzene rings [C—O—C—C torsion angles = −0.97 (14) and 179.47 (9)°], whereas the meth­oxy group at the para position is twisted from the attached ring with a C—O—C—C torsion angle of −104.48 (11)°. A C—H⋯O close contact involving two of the meth­oxy groups generates an S(6) ring motif. In the crystal, mol­ecules are linked by weak C—H⋯O inter­actions into columns along the b axis. PMID:22058997

Concentric ring flywheel with hooked ring carbon fiber separator/torque coupler

DOEpatents

Kuklo, Thomas C.

1999-01-01

A concentric ring flywheel with expandable separators, which function as torque couplers, between the rings to take up the gap formed between adjacent rings due to differential expansion between different radius rings during rotation of the flywheel. The expandable separators or torque couplers include a hook-like section at an upper end which is positioned over an inner ring and a shelf-like or flange section at a lower end onto which the next adjacent outer ring is positioned. As the concentric rings are rotated the gap formed by the differential expansion there between is partially taken up by the expandable separators or torque couplers to maintain torque and centering attachment of the concentric rings.

Crystal structure of azilsartan methyl ester ethyl acetate hemisolvate.

PubMed

Li, Zhengyi; Liu, Rong; Zhu, Meilan; Chen, Liang; Sun, Xiaoqiang

2015-02-01

The title compound, C26H22N4O5 (systematic name: methyl 2-eth-oxy-1-{4-[2-(5-oxo-4,5-di-hydro-1,2,4-oxa-diazol-3-yl)phenyl]benz-yl}-1H-1,3-benzo-diazole-7-carboxyl-ate ethyl acetate hemisolvate), was obtained via cyclization of methyl (Z)-2-eth-oxy-1-{(2'-(N'-hy-droxy-carbamimido-yl)-[1,1'-biphen-yl]-4-yl)meth-yl}-1H-benzo[d]imidazole-7-carboxyl-ate with diphen-yl carbonate. There are two independent mol-ecules (A and B) with different conformations and an ethyl acetate solvent mol-ecule in the asymmetric unit. In mol-ecule A, the dihedral angle between the benzene ring and its attached oxa-diazole ring is 59.36 (17); the dihedral angle between the benzene rings is 43.89 (15) and that between the benzene ring and its attached imidazole ring system is 80.06 (11)°. The corres-ponding dihedral angles in mol-ecule B are 58.45 (18), 50.73 (16) and 85.37 (10)°, respectively. The C-O-C-Cm (m = meth-yl) torsion angles for the eth-oxy side chains attached to the imidazole rings in mol-ecules A and B are 93.9 (3) and -174.6 (3)°, respectively. In the crystal, the components are linked by N-H⋯N and C-H⋯O hydrogen bonds, generating a three-dimensional network. Aromatic π-π stacking inter-actions [shortest centroid-centroid separation = 3.536 (3)Å] are also observed.

Evaluation of SRB phenolic TPS material made by an alternate vendor

NASA Technical Reports Server (NTRS)

Karu, Z. S.

1982-01-01

Tests conducted to evaluate the adequacy of solid rocket booster (SRB) phenolic thermal protection system (TPS) material supplied by an alternate vendor chosen by United Space Boosters, Inc. (USBI), to replace the current phenolic TPS sections used thus far on the first four Shuttle flights. The phenolic TPS is applied mainly to the attach and kick rings of the solid rocket booster (SRB). Full-scale sectional models of both the attach and kick ring structure were made up with 0.0265 in. thick stainless steel thin skin covers with thermocouples on them to determine the heating rates. Such models were made up for both the forward and rear faces of the kick ring which has a different configuration on each side. The thin skins were replaced with the alternate phenolic TPS sections cut from flight hardware configuration phenolic parts as supplied by the new vendor. Two tests were performed for each configuration of the attach and kick rings and the samples were exposed to the flow for a duration that gave a heat load equivalent to that obtained in the series of runs made for the current line of phenolic TPS. The samples performed very well with no loss of any phenolic layers. The post-test samples looked better than those used to verify the current phenolic TPS.

Concentric ring flywheel with hooked ring carbon fiber separator/torque coupler

DOEpatents

Kuklo, T.C.

1999-07-20

A concentric ring flywheel with expandable separators, which function as torque couplers, between the rings to take up the gap formed between adjacent rings due to differential expansion between different radius rings during rotation of the flywheel. The expandable separators or torque couplers include a hook-like section at an upper end which is positioned over an inner ring and a shelf-like or flange section at a lower end onto which the next adjacent outer ring is positioned. As the concentric rings are rotated the gap formed by the differential expansion there between is partially taken up by the expandable separators or torque couplers to maintain torque and centering attachment of the concentric rings. 2 figs.

The rings of Uranus

NASA Technical Reports Server (NTRS)

Elliot, J. L.; Dunham, E.; Mink, D.

1977-01-01

A description is given of the observation of five brief occultations of the star SAO 158687 which occurred both before and after its occultation by Uranus on March 10, 1977. The events were observed with a three-channel occultation photometer, attached to a 91-cm telescope. The observations indicate that at least five rings encircle the planet Uranus. Possible reasons for the narrowness of the Uranus rings are discussed.

Crystal structure of 4-fluoro-N-[2-(4-fluoro-benzo-yl)hydra-zine-1-carbono-thio-yl]benzamide.

PubMed

Firdausiah, Syadza; Salleh Huddin, Ameera Aqeela; Hasbullah, Siti Aishah; Yamin, Bohari M; Yusoff, Siti Fairus M

2014-09-01

In the title compound, C15H11F2N3O2S, the dihedral angle between the fluoro-benzene rings is 88.43 (10)° and that between the central semithiocarbazide grouping is 47.00 (11)°. The dihedral angle between the amide group and attached fluoro-benzene ring is 50.52 (11)°; the equivalent angle between the carbonyl-thio-amide group and its attached ring is 12.98 (10)°. The major twists in the mol-ecule occur about the C-N-N-C bonds [torsion angle = -138.7 (2)°] and the Car-Car-C-N (ar = aromatic) bonds [-132.0 (2)°]. An intra-molecular N-H⋯O hydrogen bond occurs, which generates an S(6) ring. In the crystal, the mol-ecules are linked by N-H⋯O and N-H⋯S hydrogen bonds, generating (001) sheets. Weak C-H⋯O and C-H⋯F inter-actions are also observed.

Functionalized apertures for the detection of chemical and biological materials

DOEpatents

Letant, Sonia E.; van Buuren, Anthony W.; Terminello, Louis J.; Thelen, Michael P.; Hope-Weeks, Louisa J.; Hart, Bradley R.

2010-12-14

Disclosed are nanometer to micron scale functionalized apertures constructed on a substrate made of glass, carbon, semiconductors or polymeric materials that allow for the real time detection of biological materials or chemical moieties. Many apertures can exist on one substrate allowing for the simultaneous detection of numerous chemical and biological molecules. One embodiment features a macrocyclic ring attached to cross-linkers, wherein the macrocyclic ring has a biological or chemical probe extending through the aperture. Another embodiment achieves functionalization by attaching chemical or biological anchors directly to the walls of the apertures via cross-linkers.

Debye ring diffraction elucidation of 2D photonic crystal self-assembly and ordering at the air-water interface.

PubMed

Smith, N L; Coukouma, A; Dubnik, S; Asher, S A

2017-12-06

We fabricate 2D photonic crystals (2DPC) by spreading a dispersion of charged colloidal particles (diameters = 409, 570, and 915 nm) onto the surface of electrolyte solutions using a needle tip flow method. When the interparticle electrostatic interaction potential is large, particles self-assemble into highly ordered hexagonal close packed (hcp) monolayers. Ordered 2DPC efficiently forward diffract monochromatic light to produce a Debye ring on a screen parallel to the 2DPC. The diameter of the Debye ring is inversely proportional to the 2DPC particle spacing, while the Debye ring brightness and thickness depends on the 2DPC ordering. The Debye ring thickness increases as the 2DPC order decreases. The Debye ring ordering measurements of 2DPC attached to glass slides track measurements of the 2D pair correlation function order parameter calculated from SEM micrographs. The Debye ring method was used to investigate the 2DPC particle spacing, and ordering at the air-solution interface of NaCl solutions, and for 2DPC arrays attached to glass slides. Surprisingly, the 2DPC ordering does not monotonically decrease as the salt concentration increases. This is because of chloride ion adsorption onto the anionic particle surfaces. This adsorption increases the particle surface charge and compensates for the decreased Debye length of the electric double layer when the NaCl concentration is below a critical value.

Turbomachine rotor with improved cooling

DOEpatents

Hultgren, Kent Goran; McLaurin, Leroy Dixon; Bertsch, Oran Leroy; Lowe, Perry Eugene

1998-01-01

A gas turbine rotor has an essentially closed loop cooling air scheme in which cooling air drawn from the compressor discharge air that is supplied to the combustion chamber is further compressed, cooled, and then directed to the aft end of the turbine rotor. Downstream seal rings attached to the downstream face of each rotor disc direct the cooling air over the downstream disc face, thereby cooling it, and then to cooling air passages formed in the rotating blades. Upstream seal rings attached to the upstream face of each disc direct the heated cooling air away from the blade root while keeping the disc thermally isolated from the heated cooling air. From each upstream seal ring, the heated cooling air flows through passages in the upstream discs and is then combined and returned to the combustion chamber from which it was drawn.

Turbomachine rotor with improved cooling

DOEpatents

Hultgren, K.G.; McLaurin, L.D.; Bertsch, O.L.; Lowe, P.E.

1998-05-26

A gas turbine rotor has an essentially closed loop cooling air scheme in which cooling air drawn from the compressor discharge air that is supplied to the combustion chamber is further compressed, cooled, and then directed to the aft end of the turbine rotor. Downstream seal rings attached to the downstream face of each rotor disc direct the cooling air over the downstream disc face, thereby cooling it, and then to cooling air passages formed in the rotating blades. Upstream seal rings attached to the upstream face of each disc direct the heated cooling air away from the blade root while keeping the disc thermally isolated from the heated cooling air. From each upstream seal ring, the heated cooling air flows through passages in the upstream discs and is then combined and returned to the combustion chamber from which it was drawn. 5 figs.

Gasket and snap ring installation tool

DOEpatents

Southerland, Jr., James M.; Barringer, Jr., Curtis N.

1994-01-01

A tool for installing a gasket and a snap ring including a shaft, a first plate attached to the forward end of the shaft, a second plate slidably carried by the shaft, a spring disposed about the shaft between the first and second plates, and a sleeve that is free to slide over the shaft and engage the second plate. The first plate has a loading surface with a loading groove for receiving a snap ring and a shoulder for holding a gasket. A plurality of openings are formed through the first plate, communicating with the loading groove and approximately equally spaced about the groove. A plurality of rods are attached to the second plate, each rod slidable in one of the openings. In use, the loaded tool is inserted into a hollow pipe or pipe fitting having an internal flange and an internal seating groove, such that the gasket is positioned against the flange and the ring is in the approximate plane of the seating groove. The sleeve is pushed against the second plate, sliding the second plate towards the first plate, compressing the spring and sliding the rods forwards in the openings. The rods engage the snap ring and urge the ring from the loading groove into the seating groove.

SRB attach ring phenolic TPS fishtail seal evaluation tests

NASA Technical Reports Server (NTRS)

Karu, Z. S.

1982-01-01

The SRB attach ring is thermally protected with layered phenolic cloth fairings that are fastened to the ring. The gap between the fairings and the motor case is closed off with a rubber seal of a fishtail cross sectional shape bonded to the phenolic. On both the STS-1 and STS-2 flights this gap was discovered to vary anywhere from an intended gap of 0.375 in. to an actual measured gap of 0.60 in. due to tolerances. Tests were conducted with and without a 0.25 in. thick cork shim placed under the seal with a 0.60 in. gap under the phenolic TPS to determine and compare the performance of the seal in the two different configurations. To alleviate the difficult and costly procedure of installing the cork shim under the seal, especially after phenolic TPS mounting on the attach ring, large fishtail seals of idential Elder gray silicon material and two different hardnesses were tested. A similar matrix of tests was conducted with this new large fishtail seal, and seals with both type hardnesses performed well regardless of whether or not the seal was bonded in the phenolic at the front of the seal groove. Similar results had been obtained with the original small fishtail seal which performed adequately with the 0.25 in. cork shim under it.

Self-locking mechanical center joint

NASA Technical Reports Server (NTRS)

Bush, H. G.; Wallsom, R. E. (Inventor)

1985-01-01

A device for connecting, rotating and locking together a pair of structural half columns is described. The device is composed of an identical pair of cylindrical hub assemblies connected at their inner faces by a spring loaded hinge; each hub assembly having a structural half column attached to its outer end. Each hub assembly has a spring loading locking ring member movably attached adjacent to its inner face and includes a latch member for holding the locking ring in a rotated position subject to the force of its spring. Each hub assembly also has a hammer member for releasing the latch on the opposing hub assembly when the hub assemblies are rotated together. The spring loaded hinge connecting the hub assemblies rotates the hub assemblies and attached structural half columns together bringing the inner faces of the opposing hub assemblies into contact with one another.

Craniopharyngioma adherence: a comprehensive topographical categorization and outcome-related risk stratification model based on the methodical examination of 500 tumors.

PubMed

Prieto, Ruth; Pascual, José María; Rosdolsky, Maria; Castro-Dufourny, Inés; Carrasco, Rodrigo; Strauss, Sewan; Barrios, Laura

2016-12-01

OBJECTIVE Craniopharyngioma (CP) adherence strongly influences the potential for achieving a radical and safe surgical treatment. However, this factor remains poorly addressed in the scientific literature. This study provides a rational, comprehensive description of CP adherence that can be used for the prediction of surgical risks associated with the removal of these challenging lesions. METHODS This study retrospectively analyzes the evidence provided in pathological, neuroradiological, and surgical CP reports concerning 3 components of the CP attachment: 1) the intracranial structures attached to the tumor; 2) the morphology of the adhesion; and 3) the adhesion strength. From a total of 1781 CP reports published between 1857 and 2016, a collection of 500 CPs providing the best information about the type of CP attachment were investigated. This cohort includes autopsy studies (n = 254); surgical studies with a detailed description or pictorial evidence of CP adherence (n = 298); and surgical CP videos (n = 61) showing the technical steps for releasing the attachment. A predictive model of CP adherence in hierarchical severity levels correlated with surgical outcomes was generated by multivariate analysis. RESULTS The anatomical location of the CP attachment occurred predominantly at the third ventricle floor (TVF) (54%, n = 268), third ventricle walls (23%, n = 114), and pituitary stalk (19%, n = 94). The optic chiasm was involved in 56% (n = 281). Six morphological patterns of CP attachment were identified: 1) fibrovascular pedicle (5.4%); 2) sessile or patch-like (21%); 3) cap-like (over the CP top, 14%); 4) bowl-like (around the CP bottom, 13.5%); 5) ring-like (encircling central band, 19%); and 6) circumferential (enveloping the entire CP, 27%). Adhesion strength was classified in 4 grades: 1) loose (easily dissectible, 8%); 2) tight (requires sharp dissection, 32%); 3) fusion (no clear cleavage plane, 40%); and 4) replacement (loss of brain tissue integrity, 20%). The types of CP attachment associated with the worst surgical outcomes are the ring-like, bowl-like, and circumferential ones with fusion to the TVF or replacement of this structure (p < 0.001). The CP topography is the variable that best predicts the type of CP attachment (p < 0.001). Ring-like and circumferential attachments were observed for CPs invading the TVF (secondary intraventricular CPs) and CPs developing within the TVF itself (infundibulo-tuberal CPs). Brain invasion and peritumoral gliosis occurred predominantly in the ring-like and circumferential adherence patterns (p < 0.001). A multivariate model including the variables CP topography, tumor consistency, and the presence of hydrocephalus, infundibulo-tuberal syndrome, and/or hypothalamic dysfunction accurately predicts the severity of CP attachment in 87% of cases. CONCLUSIONS A comprehensive descriptive model of CP adherence in 5 hierarchical levels of increased severity-mild, moderate, serious, severe, and critical-was generated. This model, based on the location, morphology, and strength of the attachment can be used to anticipate the surgical risk of hypothalamic injury and to plan the degree of removal accordingly.

Recent advances of pyrrolopyridines derivatives: a patent and literature review.

PubMed

El-Gamal, Mohammed I; Anbar, Hanan S

2017-05-01

Several pyrrolopyridines or azaindoles have been reported in the literature as biologically-active molecules. Most of them are anticancer agents, and few possess other therapeutic effects. Areas covered: The most recent biologically-active pyrrolopyridine derivatives have been reviewed from the patents and research articles published from 2010 to the mid of 2016. Their structural and biological features have been explained. In general, the pyrrolopyridine scaffold mimics the purine ring of the ATP molecule. So the well-designed pyrrolopyridine analogues can successfully act as kinase inhibitors for treatment of cancer and/or other diseases. The most successful pyrrolopyridine derivative that is currently used in the market is vemurafenib, which is used for treatment of melanoma. Its chemical and biological features have been reviewed and explained. Expert opinion: The heterocyclic pyrrolopyridine nucleus mimics the purine ring of ATP. So they can work as inhibitors of the kinase at hinge region. Due to the structural similarity with ATP, these pyrrolopyridine derivatives are estimated to be non-selective kinase inhibitors. The selectivity is conferred mainly from the different substituents attached to the azaindole nucleus. More details are presented in the 'Expert Opinion' section at the end of this article. This section covers the chemistry and the biological properties of therapeutically-efficient pyrrolopyridine-possessing compounds.

Evaluation of stress patterns produced by implant-retained overdentures and implant-retained fixed partial denture.

PubMed

Mazaro, José Vitor Quinelli; Filho, Humberto Gennari; Vedovatto, Eduardo; Pellizzer, Eduardo Piza; Rezende, Maria Cristina Rosifini Alves; Zavanelli, Adriana Cristina

2011-11-01

The purposes of this study were to photoelastically measure the biomechanical behavior of 4 implants retaining different cantilevered bar mandibular overdenture designs and to compare a fixed partial denture (FPD). A photoelastic model of a human edentulous mandible was fabricated, which contained 4 screw-type implants (3.75 × 10 mm) embedded in the parasymphyseal area. An FPD and 3 overdenture designs with the following attachments were evaluated: 3 plastic Hader clips, 1 Hader clip with 2 posterior resilient cap attachments, and 3 ball/O-ring attachments. Vertical occlusal forces of 100 N were applied between the central incisor and unilaterally to the right and left second premolars and second molars. Stresses that developed in the supporting structure were monitored photoelastically and recorded photographically. The results showed that the anterior loading, the overdenture with 3 plastic Hader clips, displayed the largest stress concentration at the medium implant. With premolar loading, the FPD and overdenture with 3 plastic Hader clips displayed the highest stresses to the ipsilateral terminal implant. With molar loading, the overdenture with 3 ball/O-ring attachments displayed the most uniform stress distribution in the posterior edentulous ridge, with less overloading in the terminal implant. It was concluded that vertical forces applied to the bar-clip overdenture and FPD created immediate stress patterns of greater magnitude and concentration on the ipsilateral implants, whereas the ball/O-ring attachments transferred minimal stress to the implants. The increased cantilever in the FPD caused the highest stresses to the terminal implant.

Building Atoms Shell by Shell.

ERIC Educational Resources Information Center

Sussman, Beverly

1993-01-01

Describes an atom-building activity where students construct three-dimensional models of atoms using a styrofoam ball as the nucleus and pom-poms, gum drops, minimarshmallows, or other small items of two different colors to represent protons and neutrons attached. Rings of various sizes with pom-poms attached represent electron shells and…

Development of a novel disposable lid speculum with a drape.

PubMed

Urano, Toru; Kasaoka, Masataka; Yamakawa, Ryoji; Yukihikotamai; Nakamura, Shoichiro

2013-01-01

To evaluate the clinical use of a newly-developed disposable lid speculum with a drape. LiDrape® is a cylindrical device that consists of two flexible rings of polyacetal resin with a transparent elastic silicone sheet attached to the rings. The novel device holds the eyelids between the rings, and a hole in the center of the device provides a surgical field. We used the novel device in cataract surgery (75 eyes), glaucoma surgery (eleven eyes), vitrectomy (ten eyes), and intravitreal injection (six eyes) and evaluated its clinical efficacy. The LiDrape was easy to attach and detach. The novel device was not detached from the eye during surgery. No eyelashes or secretions from the meibomian glands were seen in the surgical field, and the drape provided a sufficient surgical field. The LiDrape functions as a lid speculum as well as a drape. Our results showed that the novel device is useful for ocular surgeries.

Crystal structure of 4-fluoro-N-[2-(4-fluoro­benzo­yl)hydra­zine-1-carbono­thio­yl]benzamide

PubMed Central

Firdausiah, Syadza; Salleh Huddin, Ameera Aqeela; Hasbullah, Siti Aishah; Yamin, Bohari M.; Yusoff, Siti Fairus M.

2014-01-01

In the title compound, C15H11F2N3O2S, the dihedral angle between the fluoro­benzene rings is 88.43 (10)° and that between the central semithiocarbazide grouping is 47.00 (11)°. The dihedral angle between the amide group and attached fluoro­benzene ring is 50.52 (11)°; the equivalent angle between the carbonyl­thio­amide group and its attached ring is 12.98 (10)°. The major twists in the mol­ecule occur about the C—N—N—C bonds [torsion angle = −138.7 (2)°] and the Car—Car—C—N (ar = aromatic) bonds [−132.0 (2)°]. An intra­molecular N—H⋯O hydrogen bond occurs, which generates an S(6) ring. In the crystal, the mol­ecules are linked by N—H⋯O and N—H⋯S hydrogen bonds, generating (001) sheets. Weak C—H⋯O and C—H⋯F inter­actions are also observed. PMID:25309250

Self-assembly of vertically aligned quantum ring-dot structure by Multiple Droplet Epitaxy

NASA Astrophysics Data System (ADS)

Elborg, Martin; Noda, Takeshi; Mano, Takaaki; Kuroda, Takashi; Yao, Yuanzhao; Sakuma, Yoshiki; Sakoda, Kazuaki

2017-11-01

We successfully grow vertically aligned quantum ring-dot structures by Multiple Droplet Epitaxy technique. The growth is achieved by depositing GaAs quantum rings in a first droplet epitaxy process which are subsequently covered by a thin AlGaAs barrier. In a second droplet epitaxy process, Ga droplets preferentially position in the center indentation of the ring as well as attached to the edge of the ring in [ 1 1 bar 0 ] direction. By designing the ring geometry, full selectivity for the center position of the ring is achieved where we crystallize the droplets into quantum dots. The geometry of the ring and dot as well as barrier layer can be controlled in separate growth steps. This technique offers great potential for creating complex quantum molecules for novel quantum information technologies.

Methyl 6-eth-oxy-3-phenyl-3a,4-dihydro-3H-chromeno[4,3-c]isoxazole-3a-car-boxylate.

PubMed

Suresh, G; Srinivasan, J; Bakthadoss, M; Aravindhan, S

2013-02-01

In the title compound, C(20)H(19)NO(5), the dihedral angle between the mean plane of the pyran ring (which has a half-chair conformation) and the benzene ring of the chromeno ring system is 7.21 (7)°. The dihedral angle between the mean plane of the chromeno ring system and the isoxazole ring is 21.78 (6)°, while the isoxazole ring forms a dihedral angle of 72.60 (8)° with the attached phenyl ring. In the crystal, mol-ecules are linked via pairs of C-H⋯O hydrogen bonds, forming inversion dimers with an R(2) (2)(10) ring motif. These dimers are linked via C-H⋯N hydrogen bonds, forming chains along [001].

Annulus fibrosus of the mitral valve: reality or myth.

PubMed

Berdajs, Denis; Zünd, Gregor; Camenisch, Colette; Schurr, Ulrich; Turina, Marko I; Genoni, Michele

2007-01-01

Surgical repair of the mitral valve is in most cases limited to the posterior leaflet of the mitral valve and to the annulus fibrosus. The term annulus fibrosus is still used in anatomical and clinical terminology and is described as a cord like structure providing the attachment of the mitral vale. However, to date no evidence exists of a ring-or cord-like structure at this area. Herein, we describe the attachment of the mitral valve by using the macroscopical and microscopical techniques. The ventricular attachment of the posterior mitral valve leaflet was investigated in 10 human hearts. In dry dissected specimens, the intraventricular illumination was used to identify the attachment of the mitral valve to the left ventricular muscle. Using the histological techniques, we verified the position of the annulus fibrosus. The attachment of the posterior mitral valve leaflet is a band-like structure positioned between the left ventricular muscle and the left atrium. This fibrous band illustrates the morphological attachment of the mitral valve and, as thus, was interpreted as the annulus fibrosus of the mitral valve. Based on our data, no ring-like structure was found corresponding to the anatomical description of the annulus fibrosus, instead the band-like fibrous tissue was identified positioned between the mitral valve and the left ventricle. Histologicaly, we detected that this structure is part of the greater structural system that is directly connected to the membranous septum, to the left and right fibrous trigone and the attachment aortic root to the left ventricular muscle.

Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups.

PubMed

Manhart, Jakob; Ayalur-Karunakaran, Santhosh; Radl, Simone; Oesterreicher, Andreas; Moser, Andreas; Ganser, Christian; Teichert, Christian; Pinter, Gerald; Kern, Wolfgang; Griesser, Thomas; Schlögl, Sandra

2016-12-01

The photo-reversible [4πs+4πs] cycloaddition reaction of pendant anthracene moieties represents a convenient strategy to impart wavelength dependent properties into hydrogenated carboxylated nitrile butadiene rubber (HXNBR) networks. The present article provides the 1 H NMR data on the reaction kinetics of the side chain functionalization of HXNBR. 2-(Anthracene-9-yl)oxirane with reactive epoxy groups is covalently attached to the polymer side chain of HXNBR via ring opening reaction between the epoxy and the carboxylic groups. Along with the identification, 1 H NMR data on the quantification of the attached functional groups are shown in dependence on reaction time and concentration of 2-(anthracene-9-yl)oxirane. Changes in the modification yield are reflected in the mechanical properties and DMA data of photo-responsive elastomers are illustrated in dependence on the number of attached anthracene groups. DMA curves over repeated cycles of UV induced crosslinking ( λ >300 nm) and UV induced cleavage ( λ =254 nm) are further depicted, demonstrating the photo-reversibility of the thermo-mechanical properties. Interpretation and discussion of the data are provided in "Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups" (Manhart et al., 2016) [1].

Torque sensor having a spoked sensor element support structure

NASA Technical Reports Server (NTRS)

Lurie, Boris J. (Inventor); Schier, J. Alan (Inventor)

1990-01-01

Piezoelectric sensor devices are attached across pairs of circularly arranged spokes arrayed on the periphery of an annular ring. The sensor devices each include a preloaded steel ball mounting arrangement for mounting a piezoelectric sensor element. A first circular interface plate on one side of the sensor structure attaches to alternate one of the spokes, and a circular interface plate on the opposite side of the same diameter as the first interface plate attaches to the remaining spokes.

(E)-3-Methyl-2,6-di­phenyl­piperidin-4-one O-(3-methyl­benzo­yl)oxime

PubMed Central

Kathiravan, V.; Krishnan, K. Gokula; Mohandas, T.; Thanikachalam, V.; Sakthivel, P.

2014-01-01

In the title compound, C26H26N2O2, the piperidine ring exhibits a chair conformation. The phenyl rings are attached to the central heterocycle in an equatorial position. The dihedral angle between the planes of the phenyl rings is 57.58 (8)°. In the crystal, C—H⋯O inter­actions connect the mol­ecules into zigzag chains along [001]. PMID:25249925

49 CFR 179.400-9 - Stiffening rings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... stiffening ring is given by the following formula: W = 0.78(Rt)0.5 Where: W = width of jacket effective on... consists of a closed section having two webs attached to the outer jacket, the jacket plate between the webs may be included up to the limit of twice the value of “W”, as defined in paragraph (b) of this...

Comparison of retention and stability of implant-retained overdentures based upon implant number and distribution.

PubMed

Scherer, Michael D; McGlumphy, Edwin A; Seghi, Robert R; Campagni, Wayne V

2013-01-01

The purpose of this investigation was to evaluate the effects of number and distribution of implants upon in vitro dislodging forces to a simulated implant-supported overdenture and to examine differences between several different attachment systems. An experiment was undertaken utilizing a model simulating a mandibular edentulous ridge with dental implants in positions on the model approximating tooth positions in the natural dentition. A cobalt-chromium-cast testing framework was used to measure the peak load required to disconnect an attachment. Four different types of commercially available attachments were used in various positions on the model in sequence to evaluate the effects of retention and stability of overdentures based on implant number and distribution: (1) ERA, (2) O-Ring, (3) Locator, and (4) Ball. For each group, 10 measurements were made of peak dislodging forces. Means were calculated and differences among the systems, directions, and groups were identified using a repeated measured analysis of variance (α = .05). The interactions between the attachment system, direction of force, and implant number and distribution were statistically significant. Vertical dislodging forces of the simulated overdenture prosthesis increased with additional widely spaced implants. Oblique dislodging forces of the simulated prosthesis increased with additional widely spaced implants except in the two-implant model with all attachments, and in the four-implant groups with Locator attachments. Anteroposterior dislodging forces of a simulated overdenture prosthesis increased with additional widely spaced implants except in the four-implant groups with Ball and Locator attachments. Ball attachments reported the highest levels of retention and stability followed by Locator, O-Ring, and ERA. Within the limitations of this study, retention and stability of an implant overdenture prosthesis are significantly affected by implant number, implant distribution, and abutment type.

Orbital Winch

NASA Technical Reports Server (NTRS)

Hoyt, Robert (Inventor); Slostad, Jeffrey T. (Inventor); Frank, Scott (Inventor); Barnes, Ian M. (Inventor)

2016-01-01

Orbital winch having: lower and upper frames; spool having upper and lower flanges with lower flange attached to lower frame; axial tether guide mounted to upper frame; secondary slewing ring coaxial with spool and rotatably mounted to upper frame, wherein secondary slewing ring's outer surface has gearing; upper tether guide mounted to inner surface of secondary slewing ring; linear translation means having upper end mounted to upper frame and lower end mounted on lower frame; primary slewing ring rotatably mounted within linear translation means allowing translation axially between flanges, wherein primary slewing ring's outer surface has gearing; lower tether guide mounted on primary slewing ring's inner surface; pinion rod having upper end mounted to upper frame and lower end mounted to lower frame, wherein pinion rod's teeth engage primary and secondary slewing rings' outer surface teeth; and tether passing through axial, upper, and lower tether guides and winding around spool.

Little-Parks oscillations in superconducting ring with Josephson junctions

NASA Astrophysics Data System (ADS)

Sharon, Omri J.; Sharoni, Amos; Berger, Jorge; Shaulov, Avner; Yeshurun, Yosi

2018-03-01

Nb nano-rings connected serially by Nb wires exhibit, at low bias currents, the typical parabolic Little-Parks magnetoresistance oscillations. As the bias current increases, these oscillations become sinusoidal. This result is ascribed to the generation of Josephson junctions caused by the combined effect of current-induced phase slips and the non-uniformity of the order parameter along each ring due to the Nb wires attached to it. This interpretation is validated by further increasing the bias current, which results in magnetoresistance oscillations typical of a SQUID.

Percutaneous distraction lengthening in brachymetacarpia.

PubMed

Volpi, Alexander D; Fragomen, Austin T

2011-08-08

Brachymetacarpia is a condition manifesting a shortened metacarpal that is caused by early closure of the epiphyseal plate and believed to arise idiopathically. The correction for brachymetacarpia is usually for cosmetic reasons as brachymetacarpia does not impair function. The literature indicates several different approaches to lengthening digits, including single-stage lengthening and rapid distraction lengthening with a bone graft. However, gradual distraction is the preferred method due to excellent cosmetic outcomes and few postoperative complications. This article reports a case of brachymetacarpia treated with distraction lengthening using a minimally invasive, percutaneous approach. A 16-year-old girl presented with a shortened left ring finger and underwent surgery to correct the deformity. The left ring finger measured 12 mm shorter than her right ring finger; however, there was normal mobility at the joints. In the operating room, an external fixator was attached using 4 self-drilling, self-tapping pins through several 3-mm skin incisions. The total fixation time was 14 weeks; however, the achieved length of 12 mm was achieved 6 weeks postoperatively. The healing index of the fixation period was 81 days/cm. The postoperative course and fixation period were uneventful, with no complications except for 2 pin infections that were treated with oral antibiotics. The method of gradual distraction lengthening in this case successfully achieved the desired length and yielded an excellent cosmetic result. Copyright 2011, SLACK Incorporated.

Manufacturing Methods and Technology Project Summary Reports

DTIC Science & Technology

1984-06-01

was selected as the composite material. This selection was based upon the following advantages in comparison to aluminum: 0 Stiffness to weight...closer to titanium than aluminum. Other composite candidate materials considered ( glass , Kevlar and metal matrix) did not offer all of these...of the bearing support ring, and the attachment of the bearing support ring to the composite gimbal base plate. A thermal test structure, which

1-(4-Chloro-2-fluoro-phen-yl)-4-difluoro-methyl-3-methyl-1H-1,2,4-triazol-5(4H)-one.

PubMed

Ren, Dong-Mei; Wang, Yong-Yi

2012-04-01

In the crystal structure of the title compound, C(10)H(7)ClF(3)N(3)O, pairs of mol-ecules are connected into dimers via pairs of C-H⋯O hydrogen bonds. The dihedral angle between the benzene ring and attached triazolone ring is 53.2 (1)°.

Ynamides in Ring Forming Transformations

PubMed Central

WANG, XIAO-NA; YEOM, HYUN-SUK; FANG, LI-CHAO; HE, SHUZHONG; MA, ZHI-XIONG; KEDROWSKI, BRANT L.; HSUNG, RICHARD P.

2013-01-01

Conspectus The ynamide functional group activates carbon-carbon triple bonds through an attached nitrogen atom that bears an electron-withdrawing group. As a result, the alkyne has both electrophilic and nucleophilic properties. Through the selection of the electron-withdrawing group attached to nitrogen chemists can modulate the electronic properties and reactivity of ynamides, making these groups versatile synthetic building blocks. The reactions of ynamides also lead directly to nitrogen-containing products, which provides access to important structural motifs found in natural products and molecules of medicinal interest. Therefore, researchers have invested increasing time and research in the chemistry of ynamides in recent years. This Account surveys and assesses new organic transformations involving ynamides developed in our laboratory and in others around the world. We showcase the synthetic power of ynamides for rapid assembly of complex molecular structures. Among the recent reports of ynamide transformations, ring-forming reactions provide a powerful tool for generating molecular complexity quickly. In addition to their synthetic utility, such reactions are mechanistically interesting. Therefore, we focus primarily on the cyclization chemistry of ynamides. This Account highlights ynamide reactions that are useful in the rapid synthesis of cyclic and polycyclic structural manifolds. We discuss the mechanisms active in the ring formations and describe representative examples that demonstrate the scope of these reactions and provide mechanistic insights. In this discussion we feature examples of ynamide reactions involving radical cyclizations, ring-closing metathesis, transition metal and non-transition metal mediated cyclizations, cycloaddition reactions, and rearrangements. The transformations presented rapidly introduce structural complexity and include nitrogen within, or in close proximity to, a newly formed ring (or rings). Thus, ynamides have emerged as powerful synthons for nitrogen-containing heterocycles and nitrogen-substituted rings, and we hope this Account will promote continued interest in the chemistry of ynamides. PMID:24164363

75 FR 10463 - Marine Mammals; File No. 15126

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... natural and anthropogenic factors for ribbon seals (Phoca fasciata), spotted seals (P. largha), ringed... samples (blood, blubber, muscle, skin, hair, vibrissae, swab samples), attachment of telemetry devices...

Correlation of vapor phase infrared spectra and regioisomeric structure in synthetic cannabinoids

NASA Astrophysics Data System (ADS)

Smith, Lewis W.; Thaxton-Weissenfluh, Amber; Abiedalla, Younis; DeRuiter, Jack; Smith, Forrest; Clark, C. Randall

2018-05-01

The twelve 1-n-pentyl-2-, 3-, 4-, 5-, 6- and 7-(1- and 2-naphthoyl)-indoles each have the same substituents attached to the indole ring, identical elemental composition (C24H23NO) yielding identical nominal and accurate masses. These twelve isomers cover all possible positions of carbonyl bridge substitution for both indole (positons 2-7) and naphthalene rings (positions 1 and 2). Regioisomeric compounds can represent significant challenges for mass based analytical methods however, infrared spectroscopy is a powerful tool for the identification of positional isomers in organic compounds. The vapor phase infrared spectra of these twelve uniquely similar compounds were evaluated in GC-IR experiments. These spectra show the bridge position on the indole ring is a dominating influence over the carbonyl absorption frequency observed for these compounds. Substitution on the pyrrole moiety of the indole ring yields the lowest Cdbnd O frequency values for position 2 and 3 giving a narrow range from 1656 to 1654 cm-1. Carbonyl absorption frequencies are higher when the naphthoyl group is attached to the benzene portion of the indole ring yielding absorption values from 1674 to 1671 cm-1. The aliphatic stretching bands in the 2900 cm-1 region yield a consistent triplet pattern because the N-alkyl substituent tail group remains unchanged for all twelve regioisomers. The asymmetric CH2 stretch is the most intense of these three bands. Changes in positional bonding for both the indole and naphthalene ring systems results in unique patterns within the 700 wavenumber out-of-plane region and these absorption bands are different for all 12 regioisomers.

Stacking interactions between nitrogen-containing six-membered heterocyclic aromatic rings and substituted benzene: studies in solution and in the solid state.

PubMed

Gung, Benjamin W; Wekesa, Francis; Barnes, Charles L

2008-03-07

The stacking interactions between an aromatic ring and a pyridine or a pyrimidine ring are studied by using a series of triptycene-derived scaffolds. The indicative ratios of the syn and anti conformers were determined by variable-temperature NMR spectroscopy. The syn conformer aligns the attached aromatic ring and the heterocycle in a parallel-displaced orientation while the anti conformer sets the two rings apart from each other. Comparing to the corresponding control compounds where a benzene ring is in the position of the heterocycle, higher attractive interactions are observed as indicated by the higher syn/anti ratios. In general, the attractive interactions are much less sensitive to the substituent effects than the corresponding nonheterocycles. The greatest attractive interactions were observed between a pyrimidine ring and a N,N-dimethylaminobenzene, consistent with a predominant donor-acceptor interaction. The interactions between a pyridine ring and a substituted benzene ring show that the pyridine is comparable to that of a NO2- or a CN-substituted benzene ring except for the unpredictable substituent effects.

Cyclic Macromolecules: Dynamics and Nonlinear Rheology, Final Report DOE Award # DE-FG02-05ER46218, Texas Tech University

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKenna, Gregory B.; Grubbs, Robert H.; Kornfield, Julia A.

2012-04-25

The work described in the present report had the original goal to produce large, entangled, ring polymers that were uncontaminated by linear chains and to characterize by rheological methods the dynamics of these rings. While the work fell short of this specific goal, the outcomes of the research performed under support from this grant provided novel macromolecular synthesis methods, new separation methods for ring and linear chains, and novel rheological data on bottle brush polymers, wedge polymers and dendron-based ring molecules. The grant funded a total of 8 archival manuscripts and one patent, all of which are attached to themore » present report.« less

Comparison of load distribution for implant overdenture attachments.

PubMed

Porter, Joseph A; Petropoulos, Vicki C; Brunski, John B

2002-01-01

The aim of this study was to compare the force and moment distributions that develop on different implant overdenture attachments when vertical compressive forces are applied to an implant-retained overdenture. The following attachments were examined: Nobel Biocare bar and clip (NBC), Nobel Biocare standard ball (NSB), Nobel Biocare 2.25-mm-diameter ball (NB2), Zest Anchor Advanced Generation (ZAAG), Sterngold ERA white (SEW), Sterngold ERA orange (SEO), Compliant Keeper System with titanium shims (CK-Ti), Compliant Keeper System with black nitrile 2SR90 sleeve rings (CK-70), and Compliant Keeper System with clear silicone 2SR90 sleeve rings (CK-90). The attachments were tested using custom strain-gauged abutments and 2 Brånemark System implants placed in a test model. Each attachment type had one part embedded in a denture-like housing and the other part (the abutment) screwed into the implants. Compressive static loads of 100 N were applied (1) bilaterally, over the distal midline (DM); (2) unilaterally, over the right implant (RI); (3) unilaterally, over the left implant (LI); and (4) between implants in the mid-anterior region (MA). Both the force and bending moment on each implant were recorded for each loading location and attachment type. Results were analyzed using 2-way analysis of variance and the Duncan multiple-range test. Both loading location and attachment type were statistically significant factors (P < .05). In general, the force and moment on an implant were greater when the load was applied directly over the implant or at MA. While not significant at every loading location, the largest implant forces tended to occur with ZAAG attachments; the smallest were found with the SEW, the SEO, the NSB, the CK-70, and the CK-90. Typically, higher moments existed for NBC and ZAAG, while lower moments existed for SEW, SEO, NSB, CK-90, and CK-70. For different loading locations, significant differences were found among the different overdenture attachment systems.

Control of vortex state in cobalt nanorings with domain wall pinning centers

NASA Astrophysics Data System (ADS)

Lal, Manohar; Sakshath, S.; Mohanan Parakkat, Vineeth; Anil Kumar, P. S.

2018-05-01

Magnetic rings at the mesoscopic scale exhibit new spin configuration states and switching behavior, which can be controlled via geometrical structure, material composition and applied field. Vortex states in magnetic nanorings ensure flux closure, which is necessary for low stray fields in high packing density in memory devices. We performed magnetoresistance measurements on cobalt nanoring devices and show that by attaching nanowires to the ring, the vortex state can be stabilized. When a square pad is attached to the free end of the wire, the domain wall nucleation field in the nanowire is reduced. In addition, the vortex state persists over a larger range of magnetic fields, and exists at all in-plane orientations of the magnetic field. These experimental findings are well supported by our micromagnetic simulations.

7-Meth­oxy-2-phenyl­chroman-4-one

PubMed Central

Piaskowska, Agata; Hodorowicz, Maciej; Nitek, Wojciech

2013-01-01

In the title compound, C16H14O3, the ring O atom and the two adjacent non-fused C atoms, as well as the attached phenyl ring, exhibit static disorder [occupancy ratio 0.559 (12):0.441 (12)]. The crystal packing features π–π [centroid–centroid distance = 3.912 (1) Å] and C—H⋯π inter­actions. PMID:23424545

Compendium of fracture mechanics problems

NASA Technical Reports Server (NTRS)

Stallworth, R.; Wilson, C.; Meyers, C.

1990-01-01

Fracture mechanics analysis results are presented from the following structures/components analyzed at Marshall Space Flight Center (MSFC) between 1982 and 1989: space shuttle main engine (SSME), Hubble Space Telescope (HST), external tank attach ring, B-1 stand LOX inner tank, and solid rocket booster (SRB). Results from the SSME high pressure fuel turbopump (HPFTP) second stage blade parametric analysis determine a critical flaw size for a wide variety of stress intensity values. The engine 0212 failure analysis was a time dependent fracture life assessment. Results indicated that the disk ruptured due to an overspeed condition. Results also indicated that very small flaws in the curvic coupling area could propagate and lead to failure under normal operating conditions. It was strongly recommended that a nondestructive evaluation inspection schedule be implemented. The main ring of the HST, scheduled to launch in 1990, was analyzed by safe-life and fail-safe analyses. First safe-life inspection criteria curves for the ring inner and outer skins and the fore and aft channels were derived. Afterwards the skins and channels were determined to be fail-safe by analysis. A conservative safe-life analysis was done on the 270 redesign external tank attach ring. Results from the analysis were used to determine the nondestructive evaluation technique required.

Vaginal rings for delivery of HIV microbicides

PubMed Central

Malcolm, R Karl; Fetherston, Susan M; McCoy, Clare F; Boyd, Peter; Major, Ian

2012-01-01

Following the successful development of long-acting steroid-releasing vaginal ring devices for the treatment of menopausal symptoms and contraception, there is now considerable interest in applying similar devices to the controlled release of microbicides against HIV. In this review article, the vaginal ring concept is first considered within the wider context of the early advances in controlled-release technology, before describing the various types of ring device available today. The remainder of the article highlights the key developments in HIV microbicide-releasing vaginal rings, with a particular focus on the dapivirine ring that is presently in late-stage clinical testing. PMID:23204872

Vaginal rings for delivery of HIV microbicides.

PubMed

Malcolm, R Karl; Fetherston, Susan M; McCoy, Clare F; Boyd, Peter; Major, Ian

2012-01-01

Following the successful development of long-acting steroid-releasing vaginal ring devices for the treatment of menopausal symptoms and contraception, there is now considerable interest in applying similar devices to the controlled release of microbicides against HIV. In this review article, the vaginal ring concept is first considered within the wider context of the early advances in controlled-release technology, before describing the various types of ring device available today. The remainder of the article highlights the key developments in HIV microbicide-releasing vaginal rings, with a particular focus on the dapivirine ring that is presently in late-stage clinical testing.

Concentric Coplanar Capacitive Sensor System with Quantitative Model

NASA Technical Reports Server (NTRS)

Chen, Tianming (Inventor); Bowler, Nicola (Inventor)

2014-01-01

A concentric coplanar capacitive sensor includes a charged central disc forming a first electrode, an outer annular ring coplanar with and outer to the charged central disc, the outer annular ring forming a second electrode, and a gap between the charged central disc and the outer annular ring. The first electrode and the second electrode may be attached to an insulative film. A method provides for determining transcapacitance between the first electrode and the second electrode and using the transcapacitance in a model that accounts for a dielectric test piece to determine inversely the properties of the dielectric test piece.

Crystal structure of N-(3-chloro-1-methyl-1H-indazol-5-yl)-4-meth-oxy-benzene-sulfonamide.

PubMed

Chicha, Hakima; Rakib, El Mostapha; Gamouh, Ahmed; Saadi, Mohamed; El Ammari, Lahcen

2014-09-01

In the title compound, C15H14ClN3O3S, the dihedral angle between the planes of the indazole ring system (r.m.s. deviation = 0.007 Å) and the benzene ring is 89.05 (7)°. The meth-oxy C atom deviates from its attached ring by 0.196 (3) Å. In the crystal, inversion dimers linked by pairs of N-H⋯O hydrogen bonds generate R 2 (2)(8) loops. The dimers are connected into [010] chains by C-H⋯O inter-actions.

Current-induced SQUID behavior of superconducting Nb nano-rings

NASA Astrophysics Data System (ADS)

Sharon, Omri J.; Shaulov, Avner; Berger, Jorge; Sharoni, Amos; Yeshurun, Yosef

2016-06-01

The critical temperature in a superconducting ring changes periodically with the magnetic flux threading it, giving rise to the well-known Little-Parks magnetoresistance oscillations. Periodic changes of the critical current in a superconducting quantum interference device (SQUID), consisting of two Josephson junctions in a ring, lead to a different type of magnetoresistance oscillations utilized in detecting extremely small changes in magnetic fields. Here we demonstrate current-induced switching between Little-Parks and SQUID magnetoresistance oscillations in a superconducting nano-ring without Josephson junctions. Our measurements in Nb nano-rings show that as the bias current increases, the parabolic Little-Parks magnetoresistance oscillations become sinusoidal and eventually transform into oscillations typical of a SQUID. We associate this phenomenon with the flux-induced non-uniformity of the order parameter along a superconducting nano-ring, arising from the superconducting leads (‘arms’) attached to it. Current enhanced phase slip rates at the points with minimal order parameter create effective Josephson junctions in the ring, switching it into a SQUID.

Shoulder and hip joints for hard space suits and the like

NASA Technical Reports Server (NTRS)

Vykukal, H. C.

1986-01-01

For use in hard space suits and the like, a joint between the torso covering and the upper arm covering (i.e., shoulder) or between the torso covering and upper leg covering (i.e., hip) is disclosed. Each joint has an outer covering and a inner covering. The outer covering has plural perferably truncated toroidal sections decreasing in size proceeding outwardly. In one embodiment at each joint there are two bearings, the first larger than the second. The outer race of the larger bearing is attached to the outer edge of the smaller end of each section and the inner race of the larger bearing is attached to the end wall. The inner race of the smaller bearing is attached to the end wall. The outer race of the smaller bearing is attached to the larger end of the next section. Each bearing hask appropriate seals. Between each section is a rubber ring for the comfort of the wearer. Such rubber rings have radial flanges attached to the inner races of two adjacent bearings. Matching semicircular grooves are formed in the abutting overlapping surfaces. Bellows-like inner walls are also provided for each section fixed at one end to an inner cylindrical flange and, at the opposite end, to an end wall. Each outer section may rotate 360 deg relative to the next outer section, whereas the bellows sections do not rotate, but rather expand or contract locally as the rigid sections rotate relative to each other.

7 CFR 301.92-8 - Attachment and disposition of certificates and recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-01-01

... required for the interstate movement of a regulated article, associated article, or non-host nursery stock... containing the regulated article, associated article, or non-host nursery stock; or (2) Attached to the regulated article, associated article, or non-host nursery stock itself if not in a container; or (3...

7 CFR 1755.505 - Buried services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... water pipes, heating ducts, and other heat sources. (9) Wire and cable attachments to buildings for... Pair Tip Color of insulation Color of marking Ring Color of insulation Color of marking 1 White Blue...

The relevance and implications of signet-ring cell adenocarcinoma of the oesophagus.

PubMed

Bleaney, Christopher William; Barrow, Mickhaiel; Hayes, Stephen; Ang, Yeng

2018-03-01

To review the current understanding of signet-ring type oesophageal adenocarcinoma including evidence for prognosis. We conducted a literature search of nine healthcare literature databases for articles detailing the biology and clinical outcomes of signet-ring cell adenocarcinoma of the oesophagus. The impact of signet-ring cell morphology was analysed and detailed in written text and tabular format. Current understanding of the biology of signet-ring cell adenocarcinoma of the oesophagus was summarised. Signet-ring cell carcinoma was represented in 7.61% of the 18 989 cases of oesophageal carcinoma reviewed in multiple studies. The presence of signet-ring cells conferred a worse prognosis and these tumours responded differently to conventional treatments as compared with typical adenocarcinoma. Little is known about the biological features of signet-ring cell adenocarcinoma of the oesophagus. Work in gastric lesions has identified potential targets for future treatments such as CDH1 and RHOA genes. Categorisation of signet-ring cell carcinomas by the proportion of signet-ring cells within tumours differs among clinicians despite WHO criteria for classification. The current UK guidelines for histopathological reporting of oesophageal tumours do not emphasise the importance of identifying signet-ring cells. The presence of signet-ring cells in oesophageal adenocarcinomas leads to poorer clinical outcomes. Current understanding of signet-ring cell biology in oesophageal cancer is limited. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Birth Control Ring

MedlinePlus

... Safe Videos for Educators Search English Español Birth Control Ring KidsHealth / For Teens / Birth Control Ring What's in this article? What Is It? ... Anillo vaginal anticonceptivo What Is It? The birth control ring is a soft, flexible, doughnut-shaped ring ...

Place attachment and disasters: Knowns and unknowns.

PubMed

Jamali, Mehdi; Nejat, Ali

When considering the factors important for disaster recovery, one must consider the attachment individuals have toward their living area. This article reviews and synthesizes the current literature on the determinants of place attachment in the context of postdisaster recovery. Although the majority of the reviewed articles focused on disaster recovery, there were some which had a broader scope and were included due to their importance. This research categorizes the determinants of place attachment into four categories: demographic, socioeconomic, spatial, and psychosocial. Age, ethnicity, and religion were grouped under the category of demographics. Job status, education, and property ownership were categorized under the socioeconomic category. Attachment to home, neighborhood, and city, together with attachment to rural and urban areas, were grouped under the spatial category. Finally, mental health status and community attachment were classified under the psychosocial heading. Based on the outcome of the aforementioned synthesis, this article develops a conceptual framework to guide future research.

Spectrum of MRI findings in clinical athletic pubalgia.

PubMed

Zajick, Donald C; Zoga, Adam C; Omar, Imran M; Meyers, William C

2008-03-01

Athletic pubalgia is a frequently encountered syndrome for clinicians who treat active patients participating in a wide variety of athletic endeavors worldwide. Pathologies associated with this clinical scenario span anatomically from the pubic symphysis to the hip and include a myriad of poorly understood and incompletely described musculoskeletal entities, many of which are centered about the pubic symphysis and its tendinous attachments. In this article, we discuss the relevant anatomy and pathophysiology for the most frequently encountered of these disorders, using magnetic resonance (MR) images as a guide. We describe an MR imaging protocol tailored to clinical athletic pubalgia. We then review reproducible MRI patterns of pathology about the pubic symphysis, the rectus abdominis/adductor aponeurosis and the inguinal ring, as well as a group of clinically confounding entities remote from the symphysis but visible by MRI.

Crystal structure of N-(3-chloro-1-methyl-1H-indazol-5-yl)-4-meth­oxy­benzene­sulfonamide

PubMed Central

Chicha, Hakima; Rakib, El Mostapha; Gamouh, Ahmed; Saadi, Mohamed; El Ammari, Lahcen

2014-01-01

In the title compound, C15H14ClN3O3S, the dihedral angle between the planes of the indazole ring system (r.m.s. deviation = 0.007 Å) and the benzene ring is 89.05 (7)°. The meth­oxy C atom deviates from its attached ring by 0.196 (3) Å. In the crystal, inversion dimers linked by pairs of N—H⋯O hydrogen bonds generate R 2 2(8) loops. The dimers are connected into [010] chains by C—H⋯O inter­actions. PMID:25309293

Novel Cyclorotor Control System for Operation at Curtate and Prolate Advance Ratios

DTIC Science & Technology

2012-03-06

control mechanisms used until now pitch the blade by attaching control rods from the blade to a rotating eccentric ring. By varying the position of...this eccentric ring the blades are pitched approximately in a sinusoidal manner with variable amplitude and phase; however, this sinusoidal pitching...Florida, June 25-28, 2007. 19Gerhardt, H., "Paddle Wheel Rotorcraft," U.S. Patent 5,265,827, November 30, 1993. 20Bohorquez, F., Rankins, F., Baeder, J

Cross-directional interlocking of rolls in an air press of a papermaking machine

DOEpatents

Beck, David A.; Gorshe, Thomas

2003-05-13

An air press for pressing a paper web is composed of a plurality of rolls including at least a first roll and a second roll. The first roll and the second roll are positioned adjacent one another and form a first nip therebetween. Further, the first roll and the second roll each have a roll end, the roll end of the first roll adjoining the roll end of the second roll. A bevel plate is attached to the roll end of the first roll, the bevel plate having at least a first angled plate face. A seal ring is positioned adjacent the roll end of the second roll, the seal ring being juxtaposed to the bevel plate. The seal ring has at least a first angled ring face, and the first angled ring face mates with the first angled plate face.

Azaquinolone dye lasers

DOEpatents

Hammond, Peter R.; Atkins, Ronald L.; Henry, Ronald A.; Fletcher, Aaron N.

1978-01-01

A dye laser comprising a laser dye solution of a compound having the general structure: ##STR1## wherein at least one of the 5, 6 and 8 ring positions is occupied by a nitrogen atom in lieu of the corresponding CR group and X is OH, alkoxy, or amino including amino substituted by at least one of the following: alkyl, aryl, acyl, aracyl, a group which taken together with the nitrogen atom of the amino group forms a heterocyclic ring, or part of one or two 5 or 6 membered aliphatic heterocyclic rings attached to ring A at positions 6 or 8 or both depending on where the N in ring A is located. R.sub.1, R.sub.3, R.sub.4, R.sub.5, R.sub.6 and R.sub.8 are hydrogen or other groups as defined below. The compounds lase in the blue to near ultraviolet region.

Azacoumarin dye lasers

DOEpatents

Hammond, Peter R.; Atkins, Ronald L.; Henry, Ronald A.; Fletcher, Aaron N.

1978-01-01

A dye laser comprising a laser dye solution of a compound having the general structure: ##STR1## wherein at least one of the 5, 6 and 8 ring positions is occupied by a nitrogen atom in lieu of the corresponding CR group and X is OH, alkoxy, or amino including amino substituted by at least one of the following: alkyl, aryl, acyl, aracyl, a group which taken together with the nitrogen atom of the amino group forms a heterocyclic ring, or part of one or two 5 or 6 membered aliphatic heterocyclic rings attached to ring A at positions 6 or 8 or both depending on where the N in ring A is located. R.sub.3, R.sub.4, R.sub.5, R.sub.6 and R.sub.8 are hydrogen or other groups as defined below. The compounds lase in the blue-green to near ultraviolet region.

Nuclear component horizontal seismic restraint

DOEpatents

Snyder, Glenn J.

1988-01-01

A nuclear component horizontal seismic restraint. Small gaps limit horizontal displacement of components during a seismic occurrence and therefore reduce dynamic loadings on the free lower end. The reactor vessel and reactor guard vessel use thicker section roll-forged rings welded between the vessel straight shell sections and the bottom hemispherical head sections. The inside of the reactor guard vessel ring forging contains local vertical dovetail slots and upper ledge pockets to mount and retain field fitted and installed blocks. As an option, the horizontal displacement of the reactor vessel core support cone can be limited by including shop fitted/installed local blocks in opposing alignment with the reactor vessel forged ring. Beams embedded in the wall of the reactor building protrude into apertures in the thermal insulation shell adjacent the reactor guard vessel ring and have motion limit blocks attached thereto to provide to a predetermined clearance between the blocks and reactor guard vessel ring.

Cooling scheme for turbine hot parts

DOEpatents

Hultgren, Kent Goran; Owen, Brian Charles; Dowman, Steven Wayne; Nordlund, Raymond Scott; Smith, Ricky Lee

2000-01-01

A closed-loop cooling scheme for cooling stationary combustion turbine components, such as vanes, ring segments and transitions, is provided. The cooling scheme comprises: (1) an annular coolant inlet chamber, situated between the cylinder and blade ring of a turbine, for housing coolant before being distributed to the turbine components; (2) an annular coolant exhaust chamber, situated between the cylinder and the blade ring and proximate the annular coolant inlet chamber, for collecting coolant exhaust from the turbine components; (3) a coolant inlet conduit for supplying the coolant to said coolant inlet chamber; (4) a coolant exhaust conduit for directing coolant from said coolant exhaust chamber; and (5) a piping arrangement for distributing the coolant to and directing coolant exhaust from the turbine components. In preferred embodiments of the invention, the cooling scheme further comprises static seals for sealing the blade ring to the cylinder and flexible joints for attaching the blade ring to the turbine components.

Articles including thin film monolayers and multilayers

DOEpatents

Li, DeQuan; Swanson, Basil I.

1995-01-01

Articles of manufacture including: (a) a base substrate having an oxide surface layer, and a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, (b) a base substrate having an oxide surface layer, a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, and a metal species attached to the multidentate ligand, (c) a base substrate having an oxide surface layer, a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, a metal species attached to the multidentate ligand, and a multifunctional organic ligand attached to the metal species, and (d) a base substrate having an oxide surface layer, a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, a metal species attached to the multidentate ligand, a multifunctional organic ligand attached to the metal species, and a second metal species attached to the multifunctional organic ligand, are provided, such articles useful in detecting the presence of a selected target species, as nonliear optical materials, or as scavengers for selected target species.

Nuclear reactor neutron shielding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speaker, Daniel P; Neeley, Gary W; Inman, James B

A nuclear reactor includes a reactor pressure vessel and a nuclear reactor core comprising fissile material disposed in a lower portion of the reactor pressure vessel. The lower portion of the reactor pressure vessel is disposed in a reactor cavity. An annular neutron stop is located at an elevation above the uppermost elevation of the nuclear reactor core. The annular neutron stop comprises neutron absorbing material filling an annular gap between the reactor pressure vessel and the wall of the reactor cavity. The annular neutron stop may comprise an outer neutron stop ring attached to the wall of the reactormore » cavity, and an inner neutron stop ring attached to the reactor pressure vessel. An excore instrument guide tube penetrates through the annular neutron stop, and a neutron plug comprising neutron absorbing material is disposed in the tube at the penetration through the neutron stop.« less

Safety harness

DOEpatents

Gunter, Larry W.

1993-01-01

A safety harness to be worn by a worker, especially a worker wearing a plastic suit thereunder for protection in a radioactive or chemically hostile environment, which safety harness comprises a torso surrounding portion with at least one horizontal strap for adjustably securing the harness about the torso, two vertical shoulder straps with rings just forward of the of the peak of the shoulders for attaching a life-line and a pair of adjustable leg supporting straps releasibly attachable to the torso surrounding portion. In the event of a fall, the weight of the worker, when his fall is broken and he is suspended from the rings with his body angled slightly back and chest up, will be borne by the portion of the leg straps behind his buttocks rather than between his legs. Furthermore, the supporting straps do not restrict the air supplied through hoses into his suit when so suspended.

Looped star polymers show conformational transition from spherical to flat toroidal shapes.

PubMed

Reiss, Pascal; Fritsche, Miriam; Heermann, Dieter W

2011-11-01

Inspired by the topological organization of the circular Escherichia coli chromosome, which is compacted by separate domains, we study a polymer architecture consisting of a central ring to which either looped or linear side chains are grafted. A shape change from a spherical to a toroidal organization takes place as soon as the inner ring becomes large enough for the attached arms to fit within its circumference. Building up a torus, the system flattens, depending on the effective bending rigidity of the chain induced by entropic repulsion of the attached loops and, to a lesser extent, linear arms. Our results suggest that the natural formation of a toroidal structure with a decreased amount of writhe induced by a specific underlying topology could be one driving force, among others, that nature exploits to ensure proper packaging of the genetic material within a rod-shaped, bacterial envelope.

Chirality transfer effects in proline-substituted coumarin compounds.

PubMed

Park, Eun-Kyung; Park, Bongjeong; Choi, Jun-Ho; Choi, Kihang; Cho, Minhaeng

2009-08-13

Conformations of proline-substituted chromophores are determined by using circular dichroism (CD) spectroscopy and quantum chemistry calculation method. Coumarin is chosen for the optical chromophore and proline amino acid is attached to its C7 position. The coumarin-proline conjugate considered contains both fluorophore and peptide linker where any polypeptides or biomolecules can be additionally connected to the free carboxyl group of the proline. Thus, the coumarin-proline is a potentially useful composite chirality-probe system for studies of protein dynamics in solution. However, detailed conformation of coumarin ring with respect to the proline ring has to be determined first. We found that there are two possible conformers, which differ from each other by the relative orientation of the coumarin ring. Comparing the measured CD spectra with the calculated ones, we directly show that only one of the two conformers is dominant in polar solvents except for water. The present study suggests that the local structure around an optical chromophore, when it is introduced to polypeptides or other biomolecules, can be studied by examining the electronic optical activity of the probe chromophore, as long as the chirality transfer from the attached amino acid to the chromophore is significantly large.

Functionalization of multi-walled carbon nanotubes by epoxide ring-opening polymerization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin Fanlong; Rhee, Kyong Yop; Park, Soo-Jin, E-mail: sjpark@inha.ac.kr

2011-12-15

In this study, covalent functionalization of carbon nanotubes (CNTs) was accomplished by surface-initiated epoxide ring-opening polymerization. FT-IR spectra showed that polyether and epoxide group covalently attached to the sidewalls of CNTs. TGA results indicated that the polyether was successfully grown from the CNT surface, with the final products having a polymer weight percentage of ca. 14-74 wt%. The O/C ratio of CNTs increased significantly from 5.1% to 29.8% after surface functionalization of CNTs. SEM and TEM images of functionalized CNTs exhibited that the tubes were enwrapped by polymer chains with thickness of several nanometers, forming core-shell structures with CNTs atmore » the center. - Graphical abstract: Functionalized CNTs were enwrapped by polymer chains with thickness of several nanometers, forming core-shell structures with CNTs at the center. Highlights: Black-Right-Pointing-Pointer CNTs were functionalized by epoxide ring-opening polymerization. Black-Right-Pointing-Pointer Polyether and epoxide group covalently attached to the sidewalls of CNTs. Black-Right-Pointing-Pointer Functionalized CNTs have a polymer weight percentage of ca. 14-74 wt%. Black-Right-Pointing-Pointer Functionalized CNTs were enwrapped by polymer chains with thickness of several nanometers.« less

Attachment in Middle Childhood: Progress and Prospects.

PubMed

Bosmans, Guy; Kerns, Kathryn A

2015-01-01

Contrary to the substantial amount of research on infant, preschool, adolescent, and adult attachment, middle childhood has long been neglected by the international attachment research community. In the past two decades, however, there has been a steep increase in research focusing on middle childhood attachment. This article provides an overview of past research, with a focus on the characteristics of secure versus insecure attachment at this age period, and an understanding of the different approaches to measure attachment. The article demonstrates the relevance of past middle childhood attachment research for both developmental psychologists and clinicians trying to understand the importance of middle childhood in individuals' development across the life span. © 2015 Wiley Periodicals, Inc.

Modular microfluidic systems using reversibly attached PDMS fluid control modules

NASA Astrophysics Data System (ADS)

Skafte-Pedersen, Peder; Sip, Christopher G.; Folch, Albert; Dufva, Martin

2013-05-01

The use of soft lithography-based poly(dimethylsiloxane) (PDMS) valve systems is the dominating approach for high-density microscale fluidic control. Integrated systems enable complex flow control and large-scale integration, but lack modularity. In contrast, modular systems are attractive alternatives to integration because they can be tailored for different applications piecewise and without redesigning every element of the system. We present a method for reversibly coupling hard materials to soft lithography defined systems through self-aligning O-ring features thereby enabling easy interfacing of complex-valve-based systems with simpler detachable units. Using this scheme, we demonstrate the seamless interfacing of a PDMS-based fluid control module with hard polymer chips. In our system, 32 self-aligning O-ring features protruding from the PDMS fluid control module form chip-to-control module interconnections which are sealed by tightening four screws. The interconnection method is robust and supports complex fluidic operations in the reversibly attached passive chip. In addition, we developed a double-sided molding method for fabricating PDMS devices with integrated through-holes. The versatile system facilitates a wide range of applications due to the modular approach, where application specific passive chips can be readily attached to the flow control module.

Block copolymer adhesion promoters via ring-opening metathesis polymerization

DOEpatents

Kent, M.S.; Saunders, R.

1997-02-18

Coupling agents are disclosed based on functionalized block copolymers for bonding thermoset polymers to solid materials. These are polymers which possess at least two types of functional groups, one which is able to attach to and react with solid surfaces, and another which can react with a thermoset resin, which are incorporated as pendant groups in monomers distributed in blocks (typically two) along the backbone of the chain. The block copolymers in this invention are synthesized by living ring-opening metathesis polymerization. 18 figs.

Star-Shaped Conjugated Systems

PubMed Central

Detert, Heiner; Lehmann, Matthias; Meier, Herbert

2010-01-01

The present review deals with the preparation and the properties of star-shaped conjugated compounds. Three, four or six conjugated arms are attached to cross-conjugated cores, which consist of single atoms (B, C+, N), benzene or azine rings or polycyclic ring systems, as for example triphenylene or tristriazolotriazine. Many of these shape-persistent [n]star compounds tend to π-stacking and self-organization, and exhibit interesting properties in materials science: Linear and non-linear optics, electrical conductivity, electroluminescence, formation of liquid crystalline phases, etc.

Stereoselective Total Synthesis of Radiolabeled Artemisinin (Qinghaosu).

DTIC Science & Technology

Our previous total synthesis of (+)- artemisinin has been optimized from 18 to 11 steps. The final two steps in the sequence are: 1) alkylation of a...product (+)- artemisinin . The first step was repeated utilizing carbon-14 methyl iodide and the sequence completed as before to afford the desired...carbon-14labeled (+)- artemisinin . The label resides in the methyl group pendant from the lactone ring (ring D), the position of attachment being C-9, the carbon atom being C-16. Keywords: Antimalarials. (aw)

Block copolymer adhesion promoters via ring-opening metathesis polymerization

DOEpatents

Kent, Michael S.; Saunders, Randall

1997-01-01

Coupling agents based on functionalized block copolymers for bonding thermoset polymers to solid materials. These are polymers which possess at least two types of functional groups, one which is able to attach to and react with solid surfaces, and another which can react with a thermoset resin, which are incorporated as pendant groups in monomers distributed in blocks (typically two) along the backbone of the chain. The block copolymers in this invention are synthesized by living ring-opening metathesis polymerization.

Colour Cues That Are Not Directly Attached to the Body of Males Do Not Influence the Mate Choice of Zebra Finches.

PubMed

Krause, E Tobias

2016-01-01

Mate choice decisions of female zebra finches are generally thought to rely on the assessment of male quality, which includes the specific ornamentation of males. A commonly used paradigm to experimentally manipulate a male's attractiveness is to add a coloured leg ring to the bird. Some studies have shown that female zebra finches prefer or alter their investment in males that have an additional red leg ring compared with males with green leg rings. Whether the coloured artificial ornaments need to be attached to the male's body or whether environmental colouration could have a similar effect on male attractiveness remains unclear. Here, I investigated this novel context to determine whether female choice between males is affected by environmental colour cues that are not directly attached to the male's body in four experiments involving 220 zebra finches (Taeniopygia guttata). A first experiment revealed that females chose males with red colour cues in the environmental background over males with green cues in the background. Based on this finding, I conducted follow-up experiments to obtain a deeper understanding of how environmental colour cues affect mate choice. Therefore, I examined whether female choice behaviour or male behaviour was altered in two additional experiments. Both experiments failed to show any effects of environmental colour cues on female choice or on male behaviour. Therefore, I replicated the initial experiment in a fourth experiment. Again replication failed; thus, the initial results indicating that environmental colouration affects mate choice behaviour of female zebra finches were not supported by the three subsequent experiments; thus, the outcome of the first experiment seems to be a false positive. Taking my results together, I found no robust support for the idea that environmental colour cues that are not directly attached to the body of male zebra finches affect female mate choice decisions.

Disturbances of Attachment and Parental Psychopathology in Early Childhood

PubMed Central

Schechter, Daniel S.; Willheim, Erica

2009-01-01

Synopsis As the field of attachment has expanded over the past four decades, the perturbations in the relational context which give rise to disturbances of attachment are increasingly, though by no means conclusively, understood. In Part I, this article reviews the historical and current state of research regarding normative attachment classification, the diagnosis of Reactive Attachment Disorder, and the proposed categories of Secure Base Distortions and Disrupted Attachment Disorder. In Part II, the article explores the role of parental psychopathology and the manner in which disturbed caregiver self-regulation leads to disturbances in the mutual regulation between caregiver and infant. The question of the relationship between particular types of maternal pathology and particular forms of attachment disturbance is examined through recent research on the association between maternal PTSD, Atypical Maternal Behavior, and child scores on the Disturbances of Attachment Interview (DAI). The authors present original research findings to support that the presence and severity of maternal violence-related PTSD were significantly associated with secure base distortion in a community pediatrics sample of 76 mothers and preschool-age children. Clinical implications and recommendations for treatment of attachment disturbances conclude the article. PMID:19486844

Method for hot press forming articles

DOEpatents

Baker, Robert R.; Hartsock, Dale L.

1982-01-01

This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

Detachable connection for a nuclear reactor fuel assembly

DOEpatents

Christiansen, D.W.; Karnesky, R.A.

1983-08-29

A locking connection for releasably attaching a handling socket to the duct tube of a fuel assembly for a nuclear reactor. The connection comprises a load pad housing mechanically attached to the duct tube and a handling socket threadably secured within the housing. A retaining ring is interposed between the housing and the handling socket and is formed with a projection and depression engagable within a cavity and groove of the housing and handling socket, respectively, to form a detachable interlocked connection assembly.

Detachable connection for a nuclear reactor fuel assembly

DOEpatents

Christiansen, David W.; Karnesky, Richard A.

1986-01-01

A locking connection for releasably attaching a handling socket to the duct tube of a fuel assembly for a nuclear reactor. The connection comprises a load pad housing mechanically attached to the duct tube and a handling socket threadably secured within the housing. A retaining ring is interposed between the housing and the handling socket and is formed with a projection and depression engageable within a cavity and groove of the housing and handling socket, respectively, to form a detachable interlocked connection assembly.

CLOSURE DEVICE

DOEpatents

Linzell, S.M.; Dorcy, D.J.

1958-08-26

A quick opening type of stuffing box employing two banks of rotatable shoes, each of which has a caraming action that forces a neoprene sealing surface against a pipe or rod where it passes through a wall is presented. A ring having a handle or wrench attached is placed eccentric to and between the two banks of shoes. Head bolts from the shoes fit into slots in this ring, which are so arranged that when the ring is rotated a quarter turn in one direction the shoes are thrust inwardly to cramp the neopnrene about the pipe, malting a tight seal. Moving the ring in the reverse direction moves the shoes outwardly and frees the pipe which then may be readily removed from the stuffing box. This device has particular application as a closure for the end of a coolant tube of a neutronic reactor.

Turbine nozzle positioning system

DOEpatents

Norton, Paul F.; Shaffer, James E.

1996-01-30

A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine.

Turbine nozzle positioning system

DOEpatents

Norton, P.F.; Shaffer, J.E.

1996-01-30

A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine. 9 figs.

Comparison of retention and stability of two implant-retained overdentures based on implant location.

PubMed

Scherer, Michael D; McGlumphy, Edwin A; Seghi, Robert R; Campagni, Wayne V

2014-09-01

The location of dental implants and the choice of retentive attachments for implant-retained overdentures are selected based on clinician preference, expert opinion, or empirical information. Limited information is available regarding implant position and the effect on the retention and stability of 2-implant mandibular implant overdentures. The purpose of this investigation was to evaluate the effect of implant location on the in vitro retention and stability of a simulated 2-implant-supported overdenture and to examine the differences among different attachment systems. A model that simulates a mandibular edentulous ridge with dental implants in positions that approximate tooth positions, and a cobalt-chromium cast framework attached to a universal testing machine was used to measure the peak load (N) required to disconnect the attachments. Four different types of attachments (Ball/Cap, ERA, Locator, and O-Ring) were used in sequence in various positions on the model to evaluate the effect of implant location on the retention and stability of a simulated 2-implant-retained overdenture. Means were calculated, and differences among the systems, directions, and groups were identified by using a repeated measured ANOVA (α=.05). For differences observed between measurements, the Bonferroni post hoc method at the 5% level of significance was used to determine the location and magnitude of difference. The interactions between the attachment system, direction of force, and implant location were statistically significant (P=.01). The vertical retention and horizontal stability of a simulated overdenture prosthesis increased with the distal implant location up to the second premolar, and the anteroposterior stability increased with distal implant location. The attachment type affected retention and stability differently by location. Ball attachments produced the highest levels of retention and stability, followed by Locator (pink), O-Ring, and ERA (orange). The retention and stability of a 2-implant simulated overdenture prosthesis is significantly affected by implant location (P=.01) and abutment type (P=.01). Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Infrared spectrum, structural and optical properties and molecular docking study of 3-(4-fluorophenyl)-5-phenyl-4,5-dihydro-1H-pyrazole-1-carbaldehyde.

PubMed

Mary, Y Sheena; Panicker, C Yohannan; Sapnakumari, M; Narayana, B; Sarojini, B K; Al-Saadi, Abdulaziz A; Van Alsenoy, C; War, Javeed Ahmad; Fun, H K

2015-03-05

The optimized molecular structure, vibrational frequencies, corresponding vibrational assignments of 3-(4-fluorophenyl)-5-phenyl-4,5-dihydro-1H-pyrazole-1-carbaldehyde have been investigated experimentally and theoretically. The title compound was optimized using at HF and DFT levels of calculations. The B3LYP/6-311++G(d,p) (5D,7F) results and in agreement with experimental infrared bands. The normal modes are assigned using potential energy distribution. The stability of the molecule arising from hyper-conjugative interaction and charge delocalization has been analyzed using natural bonding orbital analysis. The frontier molecular orbital analysis is used to determine the charge transfer within the molecule. From molecular electrostatic potential map, it is evident that the negative electrostatic potential regions are mainly localized over the carbonyl group and mono substituted phenyl ring and are possible sites for electrophilic attack and, positive regions are localized around all para substituted phenyl and pyrazole ring, indicating possible sites for nucleophilic attack. First hyperpolarizability is calculated in order to find its role in nonlinear optics. The geometrical parameters are in agreement with experimental data. From the molecular docking studies, it is evident that the fluorine atom attached to phenyl ring and the carbonyl group attached to pyrazole ring are crucial for binding and the results draw us to the conclusion that the compound might exhibit phosphodiesterase inhibitory activity. Copyright © 2014 Elsevier B.V. All rights reserved.

Nitrated metalloporphyrins as catalysts for alkane oxidation

DOEpatents

Ellis, P.E. Jr.; Lyons, J.E.

1994-01-18

Compositions of matter comprising nitro-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has nitro groups attached thereto in meso and/or [beta]-pyrrolic positions.

Nitrated metalloporphyrins as catalysts for alkane oxidation

DOEpatents

Ellis, Jr., Paul E.; Lyons, James E.

1994-01-01

Compositions of matter comprising nitro-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has nitro groups attached thereto in meso and/or .beta.-pyrrolic positions.

Improved Blackbody Temperature Sensors for a Vacuum Furnace

NASA Technical Reports Server (NTRS)

Farmer, Jeff; Coppens, Chris; O'Dell, J. Scott; McKechnie, Timothy N.; Schofield, Elizabeth

2009-01-01

Some improvements have been made in the design and fabrication of blackbody sensors (BBSs) used to measure the temperature of a heater core in a vacuum furnace. Each BBS consists of a ring of thermally conductive, high-melting-temperature material with two tantalum-sheathed thermocouples attached at diametrically opposite points. The name "blackbody sensor" reflects the basic principle of operation. Heat is transferred between the ring and the furnace heater core primarily by blackbody radiation, heat is conducted through the ring to the thermocouples, and the temperature of the ring (and, hence, the temperature of the heater core) is measured by use of the thermocouples. Two main requirements have guided the development of these BBSs: (1) The rings should have as high an emissivity as possible in order to maximize the heat-transfer rate and thereby maximize temperature-monitoring performance and (2) the thermocouples must be joined to the rings in such a way as to ensure long-term, reliable intimate thermal contact. The problem of fabricating a BBS to satisfy these requirements is complicated by an application-specific prohibition against overheating and thereby damaging nearby instrumentation leads through the use of conventional furnace brazing or any other technique that involves heating the entire BBS and its surroundings. The problem is further complicated by another application-specific prohibition against damaging the thin tantalum thermocouple sheaths through the use of conventional welding to join the thermocouples to the ring. The first BBS rings were made of graphite. The tantalum-sheathed thermocouples were attached to the graphite rings by use of high-temperature graphite cements. The ring/thermocouple bonds thus formed were found to be weak and unreliable, and so graphite rings and graphite cements were abandoned. Now, each BBS ring is made from one of two materials: either tantalum or a molybdenum/titanium/zirconium alloy. The tantalum-sheathed thermocouples are bonded to the ring by laser brazing. The primary advantage of laser brazing over furnace brazing is that in laser brazing, it is possible to form a brazed connection locally, without heating nearby parts to the flow temperature of the brazing material. Hence, it is possible to comply with the prohibition against overheating nearby instrumentation leads. Also, in laser brazing, unlike in furnace brazing, it is possible to exert control over the thermal energy to such a high degree that it becomes possible to braze the thermocouples to the ring without burning through the thin tantalum sheaths on the thermocouples. The brazing material used in the laser brazing process is a titanium-boron paste. This brazing material can withstand use at temperatures up to about 1,400 C. In thermal-cycling tests performed thus far, no debonding between the rings and thermocouples has been observed. Emissivity coatings about 0.001 in. (.0.025 mm) thick applied to the interior surfaces of the rings have been found to improve the performance of the BBS sensors by raising the apparent emissivities of the rings. In thermal-cycling tests, the coatings were found to adhere well to the rings.

Docking system for spacecraft

NASA Technical Reports Server (NTRS)

Kahn, Jon B. (Inventor)

1988-01-01

A mechanism is disclosed for the docking of a spacecraft to a space station where a connection for transfer of personnel and equipment is desired. The invention comprises an active docking structure on a spacecraft and a passive docking structure on the station. The passive structure includes a docking ring mounted on a tunnel structure fixed to the space station. The active structure includes a docking ring carried by an actuator-attenuator devices, each attached at one end to the ring and at its other end in the spacecraft payload bay. The devices respond to command signals for moving the docking ring between a stowed position in the spacecraft to a deployed position suitable for engagement with the docking ring. The devices comprise means responsive to signals of sensed loadings to absorb impact energy and retraction means for drawing the coupled spacecraft and station into final docked configuration and moving the tunnel structure to a berthed position in the spacecraft. Latches couple the spacecraft and space station upon contact of the docking rings and latches establish a structural tie between the spacecraft when retracted.

Advanced Solid Rocket Motor case design status

NASA Technical Reports Server (NTRS)

Palmer, G. L.; Cash, S. F.; Beck, J. P.

1993-01-01

The Advanced Solid Rocket Motor (ASRM) case design aimed at achieving a safer and more reliable solid rocket motor for the Space Shuttle system is considered. The ASRM case has a 150.0 inch diameter, three equal length segment, and 9Ni-4CO-0.3C steel alloy. The major design features include bolted casebolted case joints which close during pressurization, plasma arc welded factory joints, integral stiffener for splash down and recovery, and integral External Tank attachment rings. Each mechanical joint has redundant and verifiable o-ring seals.

Liquid metal pump

DOEpatents

Pennell, William E.

1982-01-01

The liquid metal pump comprises floating seal rings and attachment of the pump diffuser to the pump bowl for isolating structural deflections from the pump shaft bearings. The seal rings also eliminate precision machining on large assemblies by eliminating the need for a close tolerance fit between the mounting surfaces of the pump and the seals. The liquid metal pump also comprises a shaft support structure that is isolated from the pump housing for better preservation of alignment of shaft bearings. The shaft support structure also allows for complete removal of pump internals for inspection and repair.

Transformable and Reconfigurable Entry, Descent and Landing Systems and Methods

NASA Technical Reports Server (NTRS)

Fernandez, Ian M. (Inventor); Venkatapathy, Ethiraj (Inventor); Hamm, Kenneth R. (Inventor)

2014-01-01

A deployable aerodynamic decelerator structure includes a ring member disposed along a central axis of the aerodynamic decelerator, a plurality of jointed rib members extending radially from the ring member and a flexible layer attached to the plurality of rib members. A deployment device is operable to reconfigure the flexible layer from a stowed configuration to a deployed configuration by movement of the rib members and a control device is operable to redirect a lift vector of the decelerator structure by changing an orientation of the flexible layer.

Dibenzo-18-crown-6–picric acid–water (1/2/3)

PubMed Central

Saleh, Muhammad Idiris; Kusrini, Eny; Rosli, Mohd Mustaqim; Fun, Hoong-Kun

2008-01-01

In the crown ether ring of the title compound, C20H24O6·2C6H3N3O7·3H2O, the O—C(H2)—C(H2)—O torsion angles indicate a gauche conformation of the ethyl­eneoxy units, while the C—O—C—C torsion angles indicate planarity of these segments; the dihedral angle between the two benzene rings is 44.53 (13)°. In both picric acid mol­ecules, one of the nitro groups is twisted away from the attached ring. The mol­ecules are linked into chains along the b axis via inter­molecular O—H⋯O hydrogen bonds. In addition, the crystal structure is stabilized by C—H⋯O hydrogen bonds and π–π inter­actions [centroid–centroid distance between benzene rings = 3.5697 (16) Å]. PMID:21202944

DOE Office of Scientific and Technical Information (OSTI.GOV)

Custelcean, Radu; Bartsch, Richard A.

Two series of novel mono-ionizable calix[4]arene-benzocrown-6 ligands in 1,3-alternate conformations are synthesized. In one series, the proton-ionizable group (PIG) is attached to the para position of one aromatic ring in the calixarene framework, thereby positioning it over the polyether ring cavity. In the other series, the PIG is a substituent on the benzo group in the polyether ring. This orients the PIG away from the crown ether cavity. In addition to carboxylic acid functions, the PIGs include N-(X)sulfonyl carboxamide groups. With X group variation from methyl to phenyl to 4-nitrophenyl to trifluoromethyl, the acidity of the PIG is 'tuned'. Solventmore » extraction of Ag{sup +} from aqueous solutions into chloroform is used to probe the influence of structural variation within the mono-ionizable calixcrown ligand on metal ion extraction efficiency, including the identity and acidity of the PIG and its orientation with respect to the polyether ring.« less

Crystal structure of 1,3-bis­{[4-(acetyl­sulfanyl)phenyl]ethynyl}azulene

PubMed Central

Förster, Sebastian; Seichter, Wilhelm; Weber, Edwin

2015-01-01

In the title compound, C30H20O2S2, the dihedral angles between the central azulene ring system (r.m.s. deviation = 0.039 Å) and the pendant benzene rings are 28.96 (7) and 55.15 (7)°. The dihedral angles between the benzene rings and their attached acetyl­sulfanyl groups are 59.60 (10) and 84.79 (10)°. The expected π–π stacking inter­actions are not observed in the crystal structure; instead, the packing features C—H⋯O hydrogen bonds, which link the mol­ecules into C(12) [010] chains, which are supported by weak C—H⋯π contacts. PMID:26870518

Solid state engine using nitinol memory alloy

DOEpatents

Golestaneh, Ahmad A.

1981-01-01

A device for converting heat energy to mechanical energy includes a reservoir of a hot fluid and a rotor assembly mounted thereabove so a portion of it dips into the hot fluid. The rotor assembly may include a shaft having four spokes extending radially outwardly therefrom at right angles to each other, a floating ring and four flexible elements composed of a thermal memory material having a critical temperature between the temperature of the hot fluid and that of the ambient atmosphere extending between the ends of the spokes and the floating ring. Preferably, the flexible elements are attached to the floating ring through curved leaf springs. Energetic shape recovery of the flexible elements in the hot fluid causes the rotor assembly to rotate.

Solid state engine using nitinol memory alloy

DOEpatents

Golestaneh, A.A.

1980-01-21

A device for converting heat energy to mechanical energy includes a reservoir of a hot fluid and a rotor assembly mounted thereabove so a portion of it dips into the hot fluid. The rotor assembly may include a shaft having four spokes extending radially outwardly therefrom at right angles to each other, a floating ring and four flexible elements composed of a thermal memory material having a critical temperature between the temperature of the hot fluid and that of the ambient atmosphere extending between the ends of the spokes and the floating ring. Preferably, the flexible elements are attached to the floating ring through curved leaf springs. Energetic shape recovery of the flexible elements in the hot fluid causes the rotor assembly to rotate.

Acclimatization process of tofu wastewater on hybrid upflow anaerobic sludge blanket reactor using polyvinyl chloride rings as a growth medium

NASA Astrophysics Data System (ADS)

Yanqoritha, Nyimas; Turmuzi, Muhammad; Derlini

2017-05-01

The appropriate process to resolve sewage contamination which have a high organic using anaerobic technology. Hybrid Upflow Anaerobic Sludge Blanket reactor is one of the anaerobic process which consists of a suspended growth media and attached growth media. The reactor has the ability to work at high load rate, sludge produced easily settles, high biomass and the separation of gas, solid and liquid excelent. The purpose of research is to study the acclimatization process in the reactor of Hybrid Upflow Anaerobic Sludge Blanket using a polyvinl chloride ring as the attached growth medium. Reactor of Hybrid Upflow Anaerobic Sludge Blanket use a working volume of 8.6 L. The operation consisting of 3 L suspended reactor and 5.6 L attached reactor. Acclimatization is conducted by providing the substrate from the smallest concentration of COD up to a concentration that will be processed. During the 50th day, acclimatization process assumed the bacteria begin to work, indicated by the dissolved COD and VSS decrease and biogas production. Due to the wastewater containing the high of protein in consequence operational parameters should be controlled and some precautions should be taken to prevent process partially or totally inhibited.

State of the science: does the theory of maternal role attainment apply to African American motherhood?

PubMed

Fouquier, Katherine Ferrell

2013-01-01

This article reviews the current state of knowledge of the theory of maternal role attainment (MRA) and its relevance in describing African American motherhood. EBSCOhost Research Databases that included PubMed, CINAHL plus, MEDLINE, PsycINFO, SCOPUS, and Web of Science were searched for journal articles that examined maternal identity and MRA. Keyword searches included maternal identity, maternal role attainment, becoming a mother, prenatal attachment, maternal-fetal attachment, and maternal-infant attachment. Inclusion criteria for this review were published journal articles of studies conducted in the United States, with a clear delineation of the theoretical framework of MRA. Journal articles that measured MRA among women with depression or medically fragile infants were excluded. Two hundred and twelve studies were reviewed; 25 studies, published between 1975 and 2007, met the inclusion criteria. Nine articles described the theory of MRA, 11 articles measured variables thought to influence MRA, and 6 articles described maternal-fetal attachment, a construct of MRA. Studies were reviewed, categorized, and analyzed to determine current knowledge of how the theory of MRA describes African American motherhood. Categories included studies describing the theoretical framework of maternal identity and MRA, studies measuring key variables thought to impact MRA, and studies measuring maternal-fetal attachment and maternal-infant attachment. The studies were limited by homogenous samples of upper-middle-class white women and low-income, single, African American adolescents. Study results of MRA cannot be generalized to African American women. Further research is essential to identify attributes influencing MRA, specifically among larger samples of African American women with demographics similar to that of the white populations that have been included in studies thus far. © 2013 by the American College of Nurse-Midwives.

Transient Pressure Test Article Test Program

NASA Technical Reports Server (NTRS)

Vibbart, Charles M.

1989-01-01

The Transient Pressure Test Article (TPTA) test program is being conducted at a new test facility located in the East Test Area at the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC) in Huntsville, Alabama. This facility, along with the special test equipment (STE) required for facility support, was constructed specifically to test and verify the sealing capability of the Redesigned Solid Rocket Motor (RSRM) field, igniter, and nozzle joints. The test article consists of full scale RSRM hardware loaded with inert propellant and assembled in a short stack configuration. The TPTA is pressurized by igniting a propellant cartridge capable of inducing a pressure rise rate which stimulates the ignition transient that occurs during launch. Dynamic loads are applied during the pressure cycle to simulate external tank attach (ETA) strut loads present on the ETA ring. Sealing ability of the redesigned joints is evaluated under joint movement conditions produced by these combined loads since joint sealing ability depends on seal resilience velocity being greater than gap opening velocity. Also, maximum flight dynamic loads are applied to the test article which is either pressurized to 600 psia using gaseous nitrogen (GN2) or applied to the test article as the pressure decays inside the test article on the down cycle after the ignition transient cycle. This new test facility is examined with respect to its capabilities. In addition, both the topic of test effectiveness versus space vehicle flight performance and new aerospace test techniques, as well as a comparison between the old SRM design and the RSRM are presented.

Addressing Parent-Child Conflict: Attachment-Based Interventions with Parents

ERIC Educational Resources Information Center

Kindsvatter, Aaron; Desmond, Kimberly J.

2013-01-01

This article describes the use of attachment theory to address parent-child conflict. The authors propose that parent-child conflict is attributable to the unmet attachment needs of both children and parents and that attachment insecurity results in problematic patterns of attachment in parent-child relationships. Three conversational frames are…

Optimization Based Trajectory Planning of Human Upper Body

DTIC Science & Technology

2004-01-01

and the shallow glenoid cavity. A ring of fibrocartilage attaches to the margin of the glenoid cavity forming the glenoid labrum. This serves to...limited, and is merely a succession of the preceding movements. Rotation is produced by the twisting of the intervertebral fibrocartilages . This

Structure-activity relationship in 34 trifluoromethylphenyl amides against Aedes aegypti

USDA-ARS?s Scientific Manuscript database

As part of our mission to discover new mosquito insecticides, 34 trifluoromethylphenyl amides were designed and synthesized. These compounds have trifluoromethyl- groups located in the ortho-, meta- or para- positions on the phenyl ring and have various substituents attached to the carbonyl carbon, ...

Apollo 11 spacecraft Command Module hoisted aboard U.S.S. Hornet

NASA Image and Video Library

1969-07-24

The Apollo 11 spacecraft Command Module is photographed being lowered to the deck of the U.S.S. Hornet, prime recovery ship for the historic lunar landing mission. Note the flotation ring attached by Navy divers has been removed from the capsule.

Thermistor holder for skin-temperature measurements

NASA Technical Reports Server (NTRS)

Greenleaf, J. E.; Williams, B. A.

1974-01-01

Sensing head of thermistor probe is supported in center area of plastic ring which has tabs so that it can be anchored in place by rubber bands or adhesive tapes. Device attaches probes to human subjects practically, reliably, and without affecting characteristics of skin segment being measured.

Cyano- and polycyanometallo-porphyrins as catalysts for alkane oxidation

DOEpatents

Ellis, P.E. Jr.; Lyons, J.E.

1995-01-17

New compositions of matter comprising cyano-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has cyano groups attached thereto in meso and/or [beta]-pyrrolic positions.

Cyano- and polycyanometallo-porphyrins as catalysts for alkane oxidation

DOEpatents

Ellis, P.E. Jr.; Lyons, J.E.

1993-05-18

New compositions of matter comprising cyano-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has cyano groups attached thereto in meso- and/or [beta]-pyrrolic positions.

Cyano- and polycyanometallo-porphyrins as catalysts for alkane oxidation

DOEpatents

Ellis, Jr., Paul E.; Lyons, James E.

1993-01-01

New compositions of matter comprising cyano-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has cyano groups attached thereto in meso and/or .beta.-pyrrolic positions.

Cyano- and polycyanometallo-porphyrins as catalysts for alkane oxidation

DOEpatents

Ellis, Jr., Paul E.; Lyons, James E.

1995-01-01

New compositions of matter comprising cyano-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has cyano groups attached thereto in meso and/or .beta.-pyrrolic positions.

Large enhancement of thermoelectric effects in a tunneling-coupled parallel DQD-AB ring attached to one normal and one superconducting lead

NASA Astrophysics Data System (ADS)

Yao, Hui; Zhang, Chao; Li, Zhi-Jian; Nie, Yi-Hang; Niu, Peng-bin

2018-05-01

We theoretically investigate the thermoelectric properties in a tunneling-coupled parallel DQD-AB ring attached to one normal and one superconducting lead. The role of the intrinsic and extrinsic parameters in improving thermoelectric properties is discussed. The peak value of figure of merit near gap edges increases with the asymmetry parameter decreasing, particularly, when asymmetry parameter is less than 0.5, the figure of merit near gap edges rapidly rises. When the interdot coupling strengh is less than the superconducting gap the thermopower spectrum presents a single-platform structure. While when the interdot coupling strengh is larger than the gap, a double-platform structure appears in thermopower spectrum. Outside the gap the peak values of figure of merit might reach the order of 102. On the basis of optimizing internal parameters the thermoelectric conversion efficiency of the device can be further improved by appropriately matching the total magnetic flux and the flux difference between two subrings.

A new multicompartmental reaction-diffusion modeling method links transient membrane attachment of E. coli MinE to E-ring formation.

PubMed

Arjunan, Satya Nanda Vel; Tomita, Masaru

2010-03-01

Many important cellular processes are regulated by reaction-diffusion (RD) of molecules that takes place both in the cytoplasm and on the membrane. To model and analyze such multicompartmental processes, we developed a lattice-based Monte Carlo method, Spatiocyte that supports RD in volume and surface compartments at single molecule resolution. Stochasticity in RD and the excluded volume effect brought by intracellular molecular crowding, both of which can significantly affect RD and thus, cellular processes, are also supported. We verified the method by comparing simulation results of diffusion, irreversible and reversible reactions with the predicted analytical and best available numerical solutions. Moreover, to directly compare the localization patterns of molecules in fluorescence microscopy images with simulation, we devised a visualization method that mimics the microphotography process by showing the trajectory of simulated molecules averaged according to the camera exposure time. In the rod-shaped bacterium Escherichia coli, the division site is suppressed at the cell poles by periodic pole-to-pole oscillations of the Min proteins (MinC, MinD and MinE) arising from carefully orchestrated RD in both cytoplasm and membrane compartments. Using Spatiocyte we could model and reproduce the in vivo MinDE localization dynamics by accounting for the previously reported properties of MinE. Our results suggest that the MinE ring, which is essential in preventing polar septation, is largely composed of MinE that is transiently attached to the membrane independently after recruited by MinD. Overall, Spatiocyte allows simulation and visualization of complex spatial and reaction-diffusion mediated cellular processes in volumes and surfaces. As we showed, it can potentially provide mechanistic insights otherwise difficult to obtain experimentally. The online version of this article (doi:10.1007/s11693-009-9047-2) contains supplementary material, which is available to authorized users.

SLS Intertank Test Article, ITA, is attached to crosshead of loa

NASA Image and Video Library

2018-04-04

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. ITA is slowly raised from bed of KMAG transporter and KMAG is removed.

Sequence-selective binding of C8-conjugated pyrrolobenzodiazepines (PBDs) to DNA.

PubMed

Basher, Mohammad A; Rahman, Khondaker Miraz; Jackson, Paul J M; Thurston, David E; Fox, Keith R

2017-11-01

DNA footprinting and melting experiments have been used to examine the sequence-specific binding of C8-conjugates of pyrrolobenzodiazepines (PBDs) and benzofused rings including benzothiophene and benzofuran, which are attached using pyrrole- or imidazole-containing linkers. The conjugates modulate the covalent attachment points of the PBDs, so that they bind best to guanines flanked by A/T-rich sequences on either the 5'- or 3'-side. The linker affects the binding, and pyrrole produces larger changes than imidazole. Melting studies with 14-mer oligonucleotide duplexes confirm covalent attachment of the conjugates, which show a different selectivity to anthramycin and reveal that more than one ligand molecule can bind to each duplex. Copyright © 2017 Elsevier B.V. All rights reserved.

General view looking out from the Fixed Service Structure at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view looking out from the Fixed Service Structure at Launch Complex 39 B at Kennedy Space Center. This view shows a Solid Rocket Booster (SRB) attached to the External Tank (ET) as well as the Orbiter Discovery attached to the ET for a complete launch stack assembly being prepared for launch. The most prominent features of the SRB shown in this view id the ET Attach Ring in the lower center of the view and the Systems Tunnel running vertically from the Aft Skirt Assembly, beyond the lower edge of this view, to the Forward Skirt near the Frustum at the top center of this view. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Residual Stress Measurements After Proof and Flight: ETP-0403

NASA Technical Reports Server (NTRS)

Webster, Ronald L..

1997-01-01

The intent of this testing was to evaluate the residual stresses that occur in and around the attachment details of a case stiffener segment that has been subjected to flight/recovery followed by proof loading. Not measured in this test were stresses relieved at joint disassembly due to out-of-round and interference effects, and those released by cutting the specimens out of the case segment. The test article was lightweight case stiffener segment 1U50715, S/N L023 which was flown in the forward stiffener position on flight SRM 14A and in the aft position on flight SRM24A. Both of these flights were flown with the 3 stiffener ring configuration. Stiffener L023 had a stiffener ring installed only on the aft stub in its first flight, and it had both rings installed on its second flight. No significant post flight damage was found on either flight. Finally, the segment was used on the DM-8 static test motor in the forward position. No stiffener rings were installed. It had only one proof pressurization prior to assignment to its first use, and it was cleaned and proof tested after each flight. Thus, the segment had seen 3 proof tests, two flight pressurizations, and two low intensity water impacts prior to manufacturing for use on DM-8. On DM-8 it received one static firing pressurization in the horizontal configuration. Residual stresses at the surface and in depth were evaluated by both the x-ray diffraction and neutron beam diffraction methods. The x-ray diffraction evaluations were conducted by Technology for Energy Corporation (TEC) at their facilities in Knoxville, TN. The neutron beam evaluations were done by Atomic Energy of Canada Limited (AECL) at the Chalk River Nuclear Laboratories in Ontario. The results showed general agreement with relatively high compressive residual stresses on the surface and moderate to low subsurface tensile residual stresses.

Attachment, parenting styles and bullying during pubertal years.

PubMed

van der Watt, Ronél

2014-01-01

Research that focuses on combining attachment, parenting styles, bullying and the reciprocal nature thereof in the parent-adolescent and peer relationships is limited. The bio-psychosocial changes that adolescents experience open up broader social realities and are perceived differently by parents and adolescents. Attachment processes and parenting styles may elicit dissimilar perceptions. These processes are also associated with the multifaceted dynamics of bullying. The aim of the article is to advocate for research on the possible link between the implications of attachment, parenting styles and bullying. Exploring the association between attachment, parenting styles and bullying can deepen the understanding of the developmental challenges within the parent-adolescent relationship, add insight to the different perceptions of adolescents and parents, and complement intervention programmes accordingly. Firstly, this article outlines bio-psychosocial changes in the pubertal years as related to the social realities of the adolescent. Secondly, a discussion on the concepts 'attachment', 'parenting styles', 'bullying', and the potential link between these concepts will follow. Thirdly, an outline of the clinical implications of the apparent association between these concepts is given. The article concludes with recommendations that researchers can consider while exploring the relationship between attachment, parenting styles, and bullying and the delineation thereof in the parent-adolescent relationship.

The Adult Attachment Projective Picture System: integrating attachment into clinical assessment.

PubMed

George, Carol; West, Malcolm

2011-01-01

This article summarizes the development and validation of the Adult Attachment Projective System (AAP), a measure we developed from the Bowlby-Ainsworth developmental tradition to assess adult attachment status. The AAP has demonstrated excellent concurrent validity with the Adult Attachment Interview (George, Kaplan, & Main, 1984/1985/1996; Main & Goldwyn, 1985-1994; Main, Goldwyn, & Hesse, 2003), interjudge reliability, and test-retest reliability, with no effects of verbal intelligence or social desirability. The AAP coding and classification system and application in clinical and community samples are summarized. Finally, we introduce the 3 other articles that are part of this Special Section and discuss the use of the AAP in therapeutic assessment and treatment.

Attachment-Based Family Therapy With a 13-Year-Old Girl Presenting With High Risk for Suicide.

PubMed

Krauthamer Ewing, E Stephanie; Levy, Suzanne A; Boamah-Wiafe, Linda; Kobak, Roger; Diamond, Guy

2016-01-01

This article describes the application of Attachment-Based Family Therapy (ABFT) to the treatment of a 13-year-old female adolescent presenting with high risk of suicide, complicated by a history of depression and sexual trauma. The article begins with an overview of ABFT, including (a) how attachment theory guides treatment; (b) the structure of the clinical model; and (c) the data that provide empirical support. A case example is then presented that exemplifies the primary clinical procedures used to reach therapeutic goals in ABFT, including attachment repair and autonomy/competence promotion. Weekly changes in suicide ideation and depression scores are presented. The article concludes with a discussion about implications for family-based treatment of suicidal youth. © 2015 American Association for Marriage and Family Therapy.

Attachment and group psychotherapy: introduction to a special section.

PubMed

Tasca, Giorgio A

2014-03-01

The application of attachment theory to adult psychotherapy represents a growing area of research and practice. Despite the conceptual overlap between group therapeutic factors, attachment theory, and therapeutic tasks as outlined by Bowlby (1988), there is little research on attachment functioning in group therapy. Hence, there remain substantial questions about the role of attachment theory in understanding group therapy processes and outcomes. The three studies in this special section advance the research in some of these important areas, including showing that positive changes in self-reported attachment insecurity among clients persist long after group therapy ends; attachment anxiety affects the level and rate of interpersonal learning in groups; and change in attachment to the therapy group has an impact on longer term change in individual group members' attachment. Each article also examines the impact of these attachment concepts on treatment outcomes. Numerous areas remain to be explored when it comes to the implications of attachment theory for understanding and conducting group therapy, including the conceptual and practical overlap between attachment concepts such as security and exploration with group therapeutic factors such as cohesion and interpersonal learning. The articles in this special section begin to address some of these issues related to attachment theory and its implications for group therapists. (c) 2014 APA, all rights reserved.

Effect of temperature and gap opening rate on the resiliency of candidate solid rocket booster O-ring materials

NASA Technical Reports Server (NTRS)

Lach, Cynthia L.

1992-01-01

In the redesign of the Space Shuttle solid rocket motor following the Challenger accident, the field and nozzle-to-case joints were designed to minimize gap opening caused by internal motor pressurization during ignition. The O-ring seals and glands for these joints were designed both to accommodate structural deflections and to promote pressure assisted sealing. The resiliency behavior of several candidate O-ring materials was evaluated for the effects of temperature and gap opening rates. The performance of three of the elastomeric materials was tested under the specific redesign gap opening requirement. Dynamic flexure conditions unique to launch produce low frequency vibrations in the gap opening. The effect of these vibrations on the ability of the O-ring to maintain contact with the sealing surface was addressed. The resiliency of the O-ring materials was found to be extremely sensitive to variations in temperature and gap opening rate. The top three elastomeric materials tracked the simulated solid rocket booster (SRB) field joint deflection at 75 and 120 F. The external tank/SRB attach strut load vibrations had a negligible effect on the ability of the O-ring to track the simulated SRB field joint deflection.

Docking system for spacecraft

NASA Technical Reports Server (NTRS)

Kahn, Jon B. (Inventor)

1990-01-01

A mechanism for the docking of a space vehicle to a space station where a connection for transfer of personnel and equipment is desired. The invention comprises an active docking structure on a space vehicle 10 and a passive docking structure on a station 11. The passive structure includes a docking ring 50 mounted on a tunnel structure 35 fixed to the space station. The active structure including a docking ring 18 carried by actuator-attenuator devices 20, each attached at one end to the ring 18 and at its other end in the vehicle's payload bay 12. The devices 20 respond to command signals for moving the docking ring 18 between a stowed position in the space vehicle to a deployed position suitable for engagement with the docking ring 50. The devices 20 comprise means responsive to signals of sensed loadings to absorb impact energy and retraction means for drawing the coupled space vehicle and station into final docked configuration and moving the tunnel structure to a berthed position in the space vehicle 10. Latches 60 couple the space vehicle and space station upon contact of docking rings 18 and 50 and latches 41-48 establish a structural tie between the spacecraft when retracted.

Avoidance of the Real and Anxiety about the Unreal: Attachment Style and Video-Gaming

ERIC Educational Resources Information Center

Coulson, Mark; Oskis, Andrea; Gould, Rebecca L

2017-01-01

In this article, the authors discuss the light and dark side of attachments and attachment style in physical and digital worlds. They argue that many games offer opportunities for the generation of new and meaningful attachments to both physical and digital others. They discuss two "fundamental attachment errors" and show how these can…

Consistent Orientation of Moduli Spaces

NASA Astrophysics Data System (ADS)

Freed, Daniel S.; Hopkins, Michael J.; Teleman, Constantin

In a series of papers by Freed, Hopkins, and Teleman (2003, 2005, 2007a) the relationship between positive energy representations of the loop group of a compact Lie group G and the twisted equivariant K-theory Kτ+dimGG (G) was developed. Here G acts on itself by conjugation. The loop group representations depend on a choice of ‘level’, and the twisting τ is derived from the level. For all levels the main theorem is an isomorphism of abelian groups, and for special transgressed levels it is an isomorphism of rings: the fusion ring of the loop group andKτ+dimGG (G) as a ring. For G connected with π1G torsionfree, it has been proven that the ring Kτ+dimGG (G) is a quotient of the representation ring of G and can be calculated explicitly. In these cases it agrees with the fusion ring of the corresponding centrally extended loop group. This chapter explicates the multiplication on the twisted equivariant K-theory for an arbitrary compact Lie group G. It constructs a Frobenius ring structure on Kτ+dimGG (G). This is best expressed in the language of topological quantum field theory: a two-dimensional topological quantum field theory (TQFT) is constructed over the integers in which the abelian group attached to the circle is Kτ+dimGG (G).

All-optical LAN architectures based on arrayed waveguide grating multiplexers

NASA Astrophysics Data System (ADS)

Woesner, Hagen

1998-10-01

The paper presents optical LAN topologies which are made possible using an Arrayed Waveguide Grating Multiplexer (AWGM) instead of a passive star coupler to interconnect stations in an all-optical LAN. Due to the collision-free nature of an AWGM it offers the n-fold bandwidth compared to the star coupler. Virtual ring topologies appear (one ring on each wavelength) if the number of stations attached to the AWGM is a prime number. A method to construct larger networks using Cayley graphs is shown. An access protocol to avoid collisions on the proposed network is outlined.

Synthesis and structure-activity relationship studies of furan-ring fused chalcones as antiproliferative agents.

PubMed

Saito, Yusuke; Kishimoto, Maho; Yoshizawa, Yuko; Kawaii, Satoru

2015-02-01

As part of our continuing investigation of flavonoid derivatives as potential anticancer substances, the synthesis of 25 cinnamoyl derivatives of benzofuran as furan-fused chalcones was carried-out and these compounds were further evaluated for their antiproliferative activity towards HL60 promyelocytic leukemia cells. In comparison with 2',4'-dihydroxychalcone, attachment of a furan moiety on the A-ring enhanced activity by more than twofold. Benzofurans may be useful in the design of biologically active flavonoids. Copyright© 2015 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

N-[4-Cyano-3-(trifluoro­meth­yl)phen­yl]-2-eth­oxy­benzamide

PubMed Central

Naveen, S.; Basappa; Manjunath, H. R.; Sridhar, M. A.; Shashidhara Prasad, J.; Rangappa, K. S.

2010-01-01

In the title compound, C17H13F3N2O2, the two aromatic rings are essentially coplanar, forming a dihedral angle of 2.78 (12)°. The non-H atoms of the eth­oxy group are coplanar with the attached ring [maximum deviation = 0.271 (3) Å]. An intra­molecular N—H⋯O hydrogen bond occurs. In the crystal structure, mol­ecules are linked by inter­molecular C—H⋯N and C—H⋯F hydrogen bonds. PMID:21587782

Configuration and energy landscape of the benzonitrile anion

NASA Astrophysics Data System (ADS)

Kirnosov, Nikita; Adamowicz, Ludwik

2017-05-01

Quantum chemical calculations are employed to study the configurational isomers of the anion formed by benzene substituted with a cyano group. It is found that an excess electron can form dipole-bound (DB) states with benzonitrile and phenyl-isocyanide isomers. It can also attach to the cyano group, if this group is separated from the benzene ring by some distance, forming a covalent CN- anion. There are four positions at peripherals of the benzene ring where this anion can localize and form stable complexes with the benzene radical. In these complexes CN- is connected to the benzene radical via non-covalent interactions.

(7-Chloro-2-oxo-2H-chromen-4-yl)methyl pyrrolidine-1-carbodi­thio­ate

PubMed Central

Kotresh, O.; Devarajegowda, H. C.; Shirahatti, Arunkumar; Kumar, K. Mahesh; Mahabhaleshwaraiah, N. M.

2013-01-01

In the title compound, C15H14ClNO2S2, the 2H-chromene ring system is essentially planar, with a maximum deviation of 0.0133 (10) Å. Three C atoms and their attached H atoms of the pyrrolidine ring are disordered [occupany ratio 0.874 (7):0.126 (7)] with both disorder components adopting a twisted conformation. The dihedral angle between the 2H-chromene ring system and the major occupancy component of the pyrrolidine ring is 89.45 (7)°. In the crystal, inversion dimers linked by pairs of C—H⋯S and C—H⋯O inter­actions generate R 2 2(24) and R 2 2(10) loops, respectively. Further C—H⋯O hydrogen bonds link the dimers into [100] chains. C—H⋯π inter­actions also occur and there is very weak π–π stacking [inter­planar spacing = 3.650 (5) Å; centroid–centroid distance = 4.095 (7) Å] between inversion-related chloro­benzene rings. PMID:24454115

Charge transport through molecular rods with reduced pi-conjugation.

PubMed

Lörtscher, Emanuel; Elbing, Mark; Tschudy, Meinrad; von Hänisch, Carsten; Weber, Heiko B; Mayor, Marcel; Riel, Heike

2008-10-24

A series of oligophenylene rods of increasing lengths is synthesized to investigate the charge-transport mechanisms. Methyl groups are attached to the phenyl rings to weaken the electronic overlap of the pi-subsystems along the molecular backbones. Out-of-plane rotation of the phenyl rings is confirmed in the solid state by means of X-ray analysis and in solution by using UV/Vis spectroscopy. The influence of the reduced pi-conjugation on the resonant charge transport is studied at the single-molecule level by using the mechanically controllable break-junction technique. Experiments are performed under ultra-high-vacuum conditions at low temperature (50 K). A linear increase of the conductance gap with increasing number of phenyl rings (from 260 meV for one ring to 580 meV for four rings) is revealed. In addition, the absolute conductance of the first resonant peaks does not depend on the length of the molecular wire. Resonant transport through the first molecular orbital is found to be dominated by charge-carrier injection into the molecule, rather than by the intrinsic resistance of the molecular wire length.

Early Attachment Relationships and the Early Childhood Curriculum

ERIC Educational Resources Information Center

Cortazar, Alejandra; Herreros, Francisca

2010-01-01

This article explores the relationship between attachment theory and the early childhood curriculum. During the first years of life children develop early attachment relationships with their primary caregivers. These attachment relationships, either secure or insecure, will shape children's socio-emotional development. In the USA, the predominant…

Conformational dynamics in fluorophenylcarbamoyl-alpha-chymotrypsins.

PubMed

Kairi, M; Gerig, J T

1990-06-19

A series of fluorine-substituted diphenylcarbamoyl chlorides have been synthesized and used to prepare corresponding diphenylcarbamoylated derivatives of alpha-chymotrypsin. The enzyme is rapidly inactivated by these compounds, as has been previously observed for the unsubstituted chloride, and the derivatives are stable enough to permit extensive studies by fluorine NMR spectroscopy. In combination with previously reported results, these NMR experiments suggest that the aromatic rings of a diphenylcarbamoyl group attached to chymotrypsin may be found in two magnetically and dynamically distinguishable sites, with exchange between these sites taking place by a process that involves rotation about the carbamoyl N-CO bond and localized unfolding of the enzyme. The extent to which a given fluoroaromatic ring is found in one of these sites is dependent on the position of the fluorine substituent and the nature of the partner aromatic ring. It is found that a 2-fluorophenyl ring, when present, dominantly determines site occupation, while a 3-fluorophenyl ring has no effects that are detectably different from those of an unsubstituted phenyl ring. There is evidence for slow aromatic ring rotation within at least one of the phenyl ring interaction sites. Saturation transfer and lineshape methods provide information about the rates of interconversion of the N-phenyl groups between these sites. Line-width, spin-lattice relaxation times and fluorine-proton nuclear Overhauser effects determined at 282 and 470 MHz are reported for each system examined.

The Development of A Squeeze Film Damper Parametric Model in the Context of a Fluid-structural Interaction Task

NASA Astrophysics Data System (ADS)

Novikov, Dmitrii K.; Diligenskii, Dmitrii S.

2018-01-01

The article considers the work of some squeeze film damper with elastic rings parts. This type of damper is widely used in gas turbine engines supports. Nevertheless, modern analytical solutions have a number of limitations. The article considers the behavior of simple hydrodynamic damping systems. It describes the analysis of fluid-solid interaction simulation applicability for the defying properties of hydrodynamic damper with elastic rings (“allison ring”). There are some recommendations on the fluid structural interaction analysis of the hydrodynamic damper with elastic rings.

Chemical silicon surface modification and bioreceptor attachment to develop competitive integrated photonic biosensors.

PubMed

Escorihuela, Jorge; Bañuls, María José; García Castelló, Javier; Toccafondo, Veronica; García-Rupérez, Jaime; Puchades, Rosa; Maquieira, Ángel

2012-12-01

Methodology for the functionalization of silicon-based materials employed for the development of photonic label-free nanobiosensors is reported. The studied functionalization based on organosilane chemistry allowed the direct attachment of biomolecules in a single step, maintaining their bioavailability. Using this immobilization approach in probe microarrays, successful specific detection of bacterial DNA is achieved, reaching hybridization sensitivities of 10 pM. The utility of the immobilization approach for the functionalization of label-free nanobiosensors based on photonic crystals and ring resonators was demonstrated using bovine serum albumin (BSA)/anti-BSA as a model system.

Monoball energy transfer: Test report

NASA Technical Reports Server (NTRS)

Wessling, F. C.

1986-01-01

An aluminum platform serves as a storage shelf for experiments transported on the space shuttle. This platform is attached to the shuttle storage area through several supports, each consisting of an attachment fitting, a monoball bearing, a clevis pin and a support strut. The experiments must be temperature controlled during and after launch. Consequently, heat loss through the plate, attachment fitting, monoball bearing, and strut are important. The overall conductance of the monoball bearing was determined by an experimental method of heating the outer ring with a nichrome resistance wire and cooling the inner ball with propylene glycol. Temperature differences across the bearing were measured for various heat fluxes. The overall conductance is 0.42 Watts/C (0.80 BTU/hr F), This yields a 16 watt loss for a 38 C temperature difference across the bearing.

Attachment in Middle Childhood: Progress and Prospects

ERIC Educational Resources Information Center

Bosmans, Guy; Kerns, Kathryn A.

2015-01-01

Contrary to the substantial amount of research on infant, preschool, adolescent, and adult attachment, middle childhood has long been neglected by the international attachment research community. In the past two decades, however, there has been a steep increase in research focusing on middle childhood attachment. This article provides an overview…

SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER

NASA Image and Video Library

2018-03-28

SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER. Matt Cash conducts tag up meeting before lift of ITA from KMAG transporter

Effect of substituents on redox, spectroscopic and structural properties of conjugated diaryltetrazines--a combined experimental and theoretical study.

PubMed

Kurach, Ewa; Djurado, David; Rimarčik, Jan; Kornet, Aleksandra; Wlostowski, Marek; Lukeš, Vladimir; Pécaut, Jacques; Zagorska, Malgorzata; Pron, Adam

2011-02-21

Two series of new soluble conjugated compounds containing tetrazine central ring have been synthesized. The three-ring compounds have been synthesized by the reaction of aryl cyanide (where aryl = thienyl, alkylthienyl, phenyl or pyridyl) with hydrazine followed by oxidation of the intermediate product with diethyl azodicarboxylate. The five-ring compounds have been prepared using two pathways: (i) reaction of 5-cyano-2,2'-bithiophene (or its alkyl derivative) with hydrazine; (ii) via Suzuki or Stille coupling of 3,6-bis(5-bromo-2-thienyl)-1,2,4,5-tetrazine with a stannyl or boronate derivative of alkylthiophene. UV-vis spectroscopic properties of the synthesized compounds are strongly dependent on the nature of the aryl group, the position of the solubilizing substituent and the length of the molecule, showing the highest bathochromic shift (λ(max) > 440 nm) for five-ring compounds with alkyl groups attached to C(α) carbon in the terminal thienyl ring. An excellent linear correlation has been found for spectroscopically determined and theoretically calculated (TD-B3LYP/6-31G*) excitation energies. With the exception of dipyridyl derivative, the calculated lowest unoccupied molecular orbital (LUMO) level of the investigated molecules changes within a narrow range (from -2.63 to -2.41 eV), in line with the electrochemical data, which show a reversible reduction process with the redox potential varying from -1.23 V to -1.33 V (vs. Fc/Fc(+)). The electrochemically determined positions of the LUMO levels are consistently lower by 0.9 to 1.2 eV with respect to the calculated ones. All molecules readily crystallize. Single crystal studies of 3,6-bis(2,2'-bithien-5-yl)-1,2,4,5-tetrazine show that it crystallizes in a P2(1)/c space group whose structural arrangement is not very favorable to the charge carriers flow within the crystal. Powder diffraction studies of other derivatives have shown that their structural organization is sensitive to the position of the solubilizing substituent. In particular, the presence of alkyl groups attached to C(α) carbon in the terminal thienyl ring promotes the formation of a lamellar-type supramolecular organization.

Lignin dimers: Structures, distribution, and potential geochemical applications

NASA Astrophysics Data System (ADS)

Goñi, Miguel A.; Hedges, John I.

1992-11-01

An extensive suite of thirty lignin-derived phenolic dimers and fourteen additional monomers has been identified among the CuO reaction products of twenty-four different vascular plant tissues. The various lignin dimers are characterized by five different types of linkages between phenolic units, including direct 5,5'-ring-ring bonding, as well as β,1-diketone, α,1-monoketone, α,5-monoketone, and α,2-methyl sidechain-ring couplings. The new lignin-derived monomeric CuO reaction products include vanillyl and syringyl glyoxalic acids and vanillyl phenols with formyl and carboxyl functional groups attached at various ring positions. The distribution of all these novel compounds in twenty-four different vascular plant tissues indicates important differences in the structure and chemical composition of the lignin macromolecule among these sources. The abundances of these compounds in a selected set of sedimentary samples suggest that the lignin dimers and novel lignin monomers can characterize the ultrastructure, sources, and diagenetic state of sedimentary lignin in ways not possible from the routinely utilized lignin monomers alone.

An histidine covalent receptor/butenolide complex mediates strigolactone perception

PubMed Central

Badet-Denisot, Marie-Ange; Pillot, Jean-Paul; Cornu, David; Le Caer, Jean-Pierre; Burger, Marco; Pelissier, Frank; Retailleau, Pascal; Turnbull, Colin; Bonhomme, Sandrine; Chory, Joanne; Rameau, Catherine; Boyer, François-Didier

2016-01-01

Strigolactone plant hormones control plant architecture and are key players in both symbiotic and parasitic interactions. They contain an ABC tricyclic lactone connected to a butenolide group, the D-ring. The DWARF14 (D14) strigolactone receptor belongs to the superfamily of α/β-hydrolases and is known to hydrolyze the bond between the ABC lactone and the D-ring. Here we characterize the binding and catalytic functions of RAMOSUS3 (RMS3), the pea (Pisum sativum) ortholog of rice (Oryza sativa) D14 strigolactone receptor. Using novel profluorescent probes with strigolactone-like bioactivity, we show that RMS3 acts as a single-turnover enzyme that explains its apparent low enzymatic rate. We further demonstrate the formation of a covalent RMS3/D-ring complex, essential for bioactivity, in which the D-ring is attached to Histidine 247 of the catalytic triad. These results reveal an undescribed mechanism of plant hormone reception where the receptor performs an irreversible enzymatic reaction to generate its own ligand. PMID:27479744

Thermoelastic damping effect of the micro-ring resonator with irregular mass and stiffness

NASA Astrophysics Data System (ADS)

Kim, Jung-Hwan; Kim, Ji-Hwan

2016-05-01

Fundamentally, vibration characteristic is a main factor for the stability of structures. In this regard, the irregularity of mass and stiffness distributions for the structure have been an interesting issue for many years. Recently, the Micro Electro Mechanical Systems (MEMS) are developed for various applications such as gyro sensors. In the present work, in-plane vibration of micro-ring structure with multiple finite-sized imperfections is investigated. Then, the unbalance of the structure is represented using Heaviside Step Function for the inextensional modeling of the ring. Also, thermoelastic damping (TED) due to internal friction is studied based on Fourier's one-dimensional heat conduction equation using Laplace Transform. To obtain the quality-factors (Q-factors) for imperfect micro-ring, analytical solutions are calculated from governing equations of motion with TED. And then, the natural frequencies and the Q-factors are observed to separate into lower and higher modes. Additionally, the vibration mode shapes are presented, and the frequency trimming concept due to attached imperfections is investigated.

Modified Cooling System for Low Temperature Experiments in a 3000 Ton Multi-Anvil Press

NASA Astrophysics Data System (ADS)

Secco, R.; Yong, W.

2017-12-01

A new modified cooling system for a 3000-ton multi-anvil press has been developed to reach temperatures below room temperature at high pressures. The new system is much simpler in design, easier to make and use, and has the same cooling capability as the previous design (Secco and Yong, RSI, 2016). The key component of the new system is a steel ring surrounding the module wedges that contains liquid nitrogen (LN2) which flows freely through an entrance port to flood the interior of the pressure module. Upper and lower O-rings on the ring seal in the liquid while permitting modest compression and an thermally insulating layer of foam is attached to the outside of the ring. The same temperature of 220 K reached with two different cooling systems suggests that thermal equilibrium is reached between the removal of heat by LN2 and the influx of heat through the massive steel components of this press.

Imidazoline phosphonic acids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redmore, D.

1972-07-04

Nitrogen-heterocyclic phosphonic acids and derivatives are characterized by aminomethyl (or substituted methyl) phosphonic acids or derivatives thereof bonded directly or indirectly, i.e., through a N-side chain to the nitrogen atom in the heterocyclic ring, for example those containing in the molecule at least one of the following units: ..pi..Equation/sup -/ where represents a heterocyclic ring having a nitrogen atom on the ring; -R'N- represents an amino- terminated side chain attached directly to the ring nitrogen (which side chain may or may not be present); and ..pi..Equation/sup -/ represents a methyl (or substituted methyl) phosphonic acid group where M is hydrogen,more » an alcohol or a salt moiety, and X and Y are hydrogen or a substituted group such as alkyl, aryl, etc., of which one or 2 units may be present depending on the available nitrogen bonded by hydrogens, and to uses for these compounds, for example, as scale inhibitors, corrosion inhibitors, etc. (5 claims)« less

A Novel Access to Arylated and Heteroarylated Beta-Carboline Based PDE5 Inhibitors

PubMed Central

Ahmed, Nermin S.; Gary, Bernard D.; Piazza, Gary A.; Tinsley, Heather N.; Laufer, Stefan; Abadi, Ashraf H.

2016-01-01

Starting from a previously reported lead compound GR30040X (a hydantoin tetrahydro-β-carboline derivative with a 4- pyridinyl ring at C- 5), a series of structurally related tetrahydro-β-carboline derivatives were prepared. The tet-rahydro-β-carboline skeleton was fused either to a hydantoin or to a piperazindione ring, the pendant aryl group attached to C-5 or C-6 was changed to a 3, 4-dimethoxyphenyl or a 3-pyridinyl ring; different N-substituents on the terminal ring were introduced, a straight chain ethyl group, a branched tert. butyl and P-chlorophenyl group rather than n-butyl group of the lead compound. All four possible diastereomers of target tetrahydro-β-carboline derivatives were prepared, separated by column chromatography and the significance of these stereochemical manipulations was studied. Synthesized compounds were evaluated for their inhibitory effect versus PDE5. Seven hits were obtained with appreciable inhibitory activity versus PDE5 with IC50s 0.14 - 4.99 μM. PMID:21054274

Application of adult attachment theory to group member transference and the group therapy process.

PubMed

Markin, Rayna D; Marmarosh, Cheri

2010-03-01

Although clinical researchers have applied attachment theory to client conceptualization and treatment in individual therapy, few researchers have applied this theory to group therapy. The purpose of this article is to begin to apply theory and research on adult dyadic and group attachment styles to our understanding of group dynamics and processes in adult therapy groups. In particular, we set forth theoretical propositions on how group members' attachment styles affect relationships within the group. Specifically, this article offers some predictions on how identifying group member dyadic and group attachment styles could help leaders predict member transference within the therapy group. Implications of group member attachment for the selection and composition of a group and the different group stages are discussed. Recommendations for group clinicians and researchers are offered. PsycINFO Database Record (c) 2010 APA, all rights reserved

Osteoclasts on bone and dentin in vitro: mechanism of trail formation and comparison of resorption behavior.

PubMed

Rumpler, M; Würger, T; Roschger, P; Zwettler, E; Sturmlechner, I; Altmann, P; Fratzl, P; Rogers, M J; Klaushofer, K

2013-12-01

The main function of osteoclasts in vivo is the resorption of bone matrix, leaving behind typical resorption traces consisting of pits and trails. The mechanism of pit formation is well described, but less is known about trail formation. Pit-forming osteoclasts possess round actin rings. In this study we show that trail-forming osteoclasts have crescent-shaped actin rings and provide a model that describes the detailed mechanism. To generate a trail, the actin ring of the resorption organelle attaches with one side outside the existing trail margin. The other side of the ring attaches to the wall inside the trail, thus sealing that narrow part to be resorbed next (3–21 lm). This 3D configuration allows vertical resorption layer-by-layer from the surface to a depth in combination with horizontal cell movement. Thus, trails are not just traces of a horizontal translation of osteoclasts during resorption. Additionally, we compared osteoclastic resorption on bone and dentin since the latter is the most frequently used in vitro model and data are extrapolated to bone. Histomorphometric analyses revealed a material-dependent effect reflected by an 11-fold higher resorption area and a sevenfold higher number of pits per square centimeter on dentin compared to bone. An important material-independent aspect was reflected by comparable mean pit area (μm²) and podosome patterns. Hence, dentin promotes the generation of resorbing osteoclasts, but once resorption has started, it proceeds independently of material properties. Thus, dentin is a suitable model substrate for data acquisition as long as osteoclast generation is not part of the analyses.

Different perspectives on the sex-attachment link: towards an emotion-motivational account.

PubMed

Dewitte, Marieke

2012-01-01

Although the link between sex and attachment was made decades ago (Hazan & Shaver, 1987), theories on sexual and attachment functioning have been developed in relative isolation. Recent efforts to integrate both literatures have been complicated by the fact that the sex-attachment link has been approached from very different perspectives, including biological, evolutionary, developmental, cognitive, and social psychology approaches. Also, at the empirical level, research on sex and attachment lacks overarching synthesis. This article gives an overview of the most important theoretical ideas and empirical insights on sex and attachment. It starts with describing general models that approach the sex-attachment link from an evolutionary and neurobiological perspective. Then, it summarizes theoretical and empirical ideas of attachment theory and describes how attachment style differences are manifested in intimate and sexual relationships. Research so far has been limited to studying the predicted link between sex and attachment in terms of broad descriptives, and it would benefit the literature to specify the processes and pathways that mediate the sex-attachment link. After a short discussion of the functional similarities between the sexual and the attachment systems, the article describes some specific--dynamical--models that focus on the emotional and cognitive-motivational processes through which attachment schemas influence sexual experiences. Such an emotion-motivational perspective on sex and attachment can help to organize theoretical ideas and empirical findings and eventually promote an integrative view on how attachment dynamics can interact with sexual experiences.

Systemic therapy and attachment narratives: Attachment Narrative Therapy.

PubMed

Dallos, Rudi; Vetere, Arlene

2014-10-01

This article outlines an integration of attachment theory with narrative theory and systemic theory and practice: Attachment Narrative Therapy (ANT). This integration offers a more powerful explanatory formulation of the development and maintenance of human distress in relationships, families and communities, and gives direction to psychotherapeutic intervention. © The Author(s) 2014.

Filter holder and gasket assembly for candle or tube filters

DOEpatents

Lippert, Thomas Edwin; Alvin, Mary Anne; Bruck, Gerald Joseph; Smeltzer, Eugene E.

1999-03-02

A filter holder and gasket assembly for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut.

Optimization of a Nutation Damper Attached to a Spin-Stabilized Satellite.

DTIC Science & Technology

1994-12-01

characteristic roots describe the damping of the simple system. The damping time index, as proposed by Borelli and Leliakov (5:345), is defined as the...Viscous Ring Damper for a Freely Precessing Satellite." International Journal of Mechanical Sciences. Vol. 8. 1966. pp. 383- 395. 5. Borelli , R. L

Bromido({2-[2-(diphenyl­phosphan­yl)benzyl­idene]hydrazin-1-yl­idene}(4-meth­oxy­anilino)methane­thiol­ato)palladium(II) acetone monosolvate

PubMed Central

Mokthar, Khalisah Asilah; Shamsuddin, Mustaffa; Rosli, Mohd Mustaqim; Fun, Hoong-Kun

2012-01-01

In the title compound, [PdBr(C27H23N3OPS)]·C3H6O, the coordination geometry about the PdII atom is distorted square-planar, arising from the attached Br, S, P and N atoms (N and Br are trans), the maximum deviation from the plane being 0.2053 (4) Å for the N atom. The three benzene rings attached to the P atom make dihedral angles of 69.78 (7), 87.05 (7) and 77.50 (7)° with each other. An intra­molecular C—H⋯N hydrogen bond forms an S(6) ring motif. In the crystal, the complex mol­ecules form infinite chains along the a-axis direction through C—H⋯Br inter­actions, and a C—H⋯O inter­action links the main mol­ecule with the acetone solvent mol­ecule. PMID:22807805

Space thermostat for the sight handicapped

DOE Office of Scientific and Technical Information (OSTI.GOV)

Odom, J.A. Jr.; Wolfe, N.T.

1986-04-15

A space thermostat is described for the sight handicapped comprising a base member adapted to be mounted on a wall of a space, temperature responsive control means mounted on the base member adapted to control temperature conditioning apparatus supplying temperature conditioned medium to a space, temperature control point adjusting means attached to the base member and connected to the temperature responsive control means for adjusting the temperature to be maintained in the space, the adjusting means having a raised control temperature reference portion, indicia support means attached to the base member and cooperating with the reference portion, raised indicia meansmore » on the indicia support means corresponding with temperature whereby a person with sight handicap can feel the reference portion and the indicia means to position the reference portion to the desired temperature control set point, the indicia support means comprises a cover ring mounted on the base member and surrounding the adjusting means, and raised indication marks on the cover ring between raised reference temperature numbers, the marks corresponding to two temperature degree steps in the movement of the adjusting means.« less

Ethyl 4-anilino-2,6-bis­(4-chloro­phen­yl)-1-phenyl-1,2,5,6-tetra­hydro­pyridine-3-carboxyl­ate

PubMed Central

Yu, Jianfeng; Tang, Shiming; Zeng, Jingbin; Yan, Zifeng

2013-01-01

The title compound, C32H28Cl2N2O2, was synthesized by a multicomponent reaction of 4-chloro­benzaldehyde, aniline and ethyl aceto­acetate. The central 1,2,5,6-tetra­hydro­pyridine ring exhibits a distorted boat conformation and the two chloro­phenyl rings attached to the central ring at positions 2 and 6 are oriented in opposite directions. The two O atoms of the eth­oxy­carbonyl group are involved in intra­molecular N—H⋯O and C—H⋯O hydrogen bonds. In the crystal, weak C—H⋯O hydrogen bonds link mol­ecules related by translation along the b axis into chains. PMID:23795109

Radiolysis of paracetamol in dilute aqueous solution

NASA Astrophysics Data System (ADS)

Szabó, László; Tóth, Tünde; Homlok, Renáta; Takács, Erzsébet; Wojnárovits, László

2012-09-01

Using radiolytic experiments hydroxyl radical (main reactant in advanced oxidation processes) was shown to effectively destroy paracetamol molecules. The basic reaction is attachment to the ring. The hydroxy-cyclohexadienyl radical produced in the further reactions may transform to hydroxylated paracetamol derivatives or to quinone type molecules and acetamide. The initial efficiency of aromatic ring destruction in the absence of dissolved O2 is c.a. 10%. The efficiency is 2-3 times higher in the presence of O2 due to its reaction with intermediate hydroxy-cyclohexadienyl radical and the subsequent ring destruction reactions through peroxi radical. Upon irradiation the toxicity of solutions at low doses increases with the dose and then at higher doses it decreases. This is due to formation of compounds with higher toxicity than paracetamol (e.g. acetamide, hidroquinone). These products, however, are highly sensitive to irradiation and degrade easily.

Benzamide-picric acid (1/1).

PubMed

Sivaramkumar, M S; Velmurugan, R; Sekar, M; Ramesh, P; Ponnuswamy, M N

2010-06-26

In the title compound, C(7)H(7)NO·C(6)H(3)N(3)O(7), one of the nitro groups of the picric acid mol-ecule lies in the plane of the attached benzene ring [dihedral angle = 1.4 (1)°] while the other two are twisted away by 9.9 (1) and 30.3 (1)°. In the benzamide mol-ecule, the amide group is almost coplanar with the benzene ring [dihedral angle = 4.4 (1)°]. An intra-molecular O-H⋯O hydrogen bond generates an S6 ring motif. In the crystal, mol-ecules are linked into a ribbon-like structure along the b axis by O-H⋯O and N-H⋯O inter-molecular hydrogen bonds. In addition, C-H⋯O hydrogen bonds and short O⋯O contacts [2.828 (2) Å] are observed.

Dual-component system dimethyl sulfoxide/LiCl as a solvent and catalyst for homogeneous ring-opening grafted polymerization of ε-caprolactone onto xylan.

PubMed

Zhang, Xue-Qin; Chen, Ming-Jie; Liu, Chuan-Fu; Sun, Run-Cang

2014-01-22

The preparation of xylan-graft-poly(ε-caprolactone) (xylan-g-PCL) copolymers was investigated by homogeneous ring-opening polymerization (ROP) in a dual-component system containing Lewis base LiCl and strong polar aprotic solvent dimethyl sulfoxide (DMSO). DMSO/LiCl acted as solvent, base, and catalyst for the ROP reaction. The effects of the parameters, including the reaction temperature, molar ratio of ε-caprolactone (ε-CL) to anhydroxylose units (AXU) in xylan, and reaction time, on the degree of substitution (DS) and weight percent of PCL side chain (WPCL) were investigated. The results showed that xylan-g-PCL copolymers with low DS in the range of 0.03-0.39 were obtained under the given conditions. The Fourier transform infrared spectroscopy (FTIR), (1)H nuclear magnetic resonance (NMR), (13)C NMR, (1)H-(1)H correlation spectroscopy (COSY), and (1)H-(13)C correlation two-dimensional (2D) NMR [heteronuclear single-quantum coherence (HSQC)] characterization provided more evidence of the attachment of side chains onto xylan. Only one ε-CL was confirmed to be attached onto xylan with each side chain. Integration of resonances assigned to the substituted C2 and C3 in the HSQC spectrum also indicated 69.23 and 30.77% of PCL side chains attached to AXU at C3 and C2 positions, respectively. Although the attachment of PCL onto xylan led to the decreased thermal stability of xylan, the loss of unrecovered xylan fractions with low molecular weight because of the high solubility of xylan in DMSO/LiCl resulted in the increased thermal stability of the samples. This kind of xylan derivative has potential application in environmentally friendly and biodegradable materials considering the good biodegradability of xylan and PCL.

Ring opening of epoxides with C-nucleophiles.

PubMed

Faiz, Sadia; Zahoor, Ameer Fawad

2016-11-01

Ring opening of epoxides has been an area of interest for organic chemists, owing to their reactivity toward nucleophiles. Such reactions yield important products depending on the type of nucleophiles used. This review article covers the synthetic approaches (1991-2015) used for the ring opening of epoxides via carbon nucleophiles.

An in vitro investigation into retention strength and fatigue resistance of various designs of tooth/implant supported overdentures.

PubMed

Fatalla, Abdalbseet A; Song, Ke; Du, Tianfeng; Cao, Yingguang

2012-02-01

Previously, the choice of prosthetic implant-retained overdentures has depended on data from previous studies about the retention-fatigue strength of the attachment system selected. Little or no data have been available on the correlation between the attachment system selected and the overdenture support configuration. The purpose of the present study was to evaluate the retention force and fatigue resistance of three attachment systems and four support designs of overdenture prosthesis. Four lower edentulous acrylic models were prepared and eight combinations of attachments groups were investigated in the study. These included: O-Rings with mini-dental implants (MDIs), Dalbo elliptic with Dalbo Rotex and fabricated flexible acrylic attachments with both MDI and Dalbo Rotex. The study was divided into four test groups: groups A and B, controls, and groups C and D, experimental groups. Control group A contained three overdenture supports: two free standing MDIs in the canine region and at the midline, and one simulated tooth root with Dalbo Rotex screwed in. Control group B contained four overdenture support foundations: two free standing MDIs in the right canine region and the first premolar region, and two simulated tooth roots with Dalbo Rotex screwed in at the same MDI position, but on the left side of the model. Experimental group C contained three overdenture support foundations: two free standing MDIs in the canine region and at the midline, and one simulated tooth root with MDI screwed in. Experimental group D contained four overdenture support foundations: two free standing MDIs in the right canine region and the first premolar region, and two simulated tooth roots with MDIs screwed in at the same MDI position, but on the left side of the model. Each group was further divided into two subgroups according to attachment type used. Five samples were prepared for each group. Retention force (N) values were recorded initially (0 cycles) and after 360, 720, 1440 and 2880 insertion and removal cycles. During the tensile test a cross-head speed of 10 mm/min was applied. Values of absolute force (AF) and relative force (RF) were statistically analyzed by two-way ANOVA and multiple comparison Tukey's tests between groups and cycles periods. The results of fatigue tests showed a 50% reduction in retention force in the subgroups with flexible attachments. A triangular design of overdenture support foundations with O-Ring attachments revealed the lowest value of AF and a relatively high reduction in RF. The four overdenture support designs with flexible acrylic attachments improved the retention force and reduced the fatigue retention. Furthermore, the results of the investigation demonstrate that flexible acrylic attachments for both teeth and implant-supported overdentures offer a wide range of retention forces.

Psychodynamic Interpretations of the Immigrant's Dream: Comments on Adler's (1993) "Refugee Dreams and Attachment Theory."

ERIC Educational Resources Information Center

Munteanu, Mircea A.

1994-01-01

Immigrants and refugees often experience difficulty adjusting to a strange new environment. This article considers Adler's (1993) article, "Refugee Dreams and Attachment Theory" but recommends a depth psychology approach, including both Freudian and Jungian perspectives, to incorporating dream analysis as a technique in cross-cultural…

Re-Thinking the Relevance of Philosophy of Education for Educational Policy Making

ERIC Educational Resources Information Center

Griffiths, Morwenna

2014-01-01

The overall question addressed in this article is,"What kind of philosophy of education is relevant to educational policy makers?" The article focuses on the following four themes: The meanings attached to the term philosophy (of education) by philosophers themselves; the meanings attached to the term philosophy (of education) by policy…

Attachment, assessment, and psychological intervention: a case study of anorexia.

PubMed

Lis, Adriana; Mazzeschi, Claudia; Di Riso, Daniela; Salcuni, Silvia

2011-01-01

Attachment patterns and personality dimensions have always been considered important to the development and adaptation of the individual. The first aim of this article was to address some basic questions about the place of attachment in a multimethod assessment when compiling a complete picture of the patient's personality functioning. The second aim was to present the Adult Attachment Projective Picture System (AAP; George & West, 2001) as a valid and productive assessment measure. Based on a single case study of an anorexic young woman, the article demonstrates how the AAP is integrated with the Rorschach Comprehensive System (Exner, 1991, 1993) and other assessment tools in both the assessment and in developing a treatment plan.

Skylab

NASA Image and Video Library

1972-04-01

In this photograph, the Orbital Workshop shower compartment was unfolded by technicians for inspection. The shower compartment was a cylindrical cloth enclosure that was folded flat when not in use. The bottom ring of the shower was fastened to the floor and contained foot restraints. The upper ring contained the shower head and hose. To use the shower, the astronaut filled a pressurized portable bottle with heated water and attached the bottle to the ceiling. A flexible hose cornected the water bottle to a handheld shower head. The astronaut pulled the cylindrical shower wall up into position and bathed, using liquid soap. Both soap and water were carefully rationed, having been premeasured for economical use.

Compact light-emitting diode lighting ring for video-assisted thoracic surgery.

PubMed

Lu, Ming-Kuan; Chang, Feng-Chen; Wang, Wen-Zhe; Hsieh, Chih-Cheng; Kao, Fu-Jen

2014-01-01

In this work, a foldable ring-shaped light-emitting diode (LED) lighting assembly, designed to attach to a rubber wound retractor, is realized and tested through porcine animal experiments. Enabled by the small size and the high efficiency of LED chips, the lighting assembly is compact, flexible, and disposable while providing direct and high brightness lighting for more uniform background illumination in video-assisted thoracic surgery (VATS). When compared with a conventional fiber bundle coupled light source that is usually used in laparoscopy and endoscopy, the much broader solid angle of illumination enabled by the LED assembly allows greatly improved background lighting and imaging quality in VATS.

Attachment of Young People to Their Home District

ERIC Educational Resources Information Center

Sinkkonen, Merja

2013-01-01

This article focuses on young people's attachment to their home district. The purpose of this study was to establish how attached young people aged 17 were to their home district and what factors were involved in young people's attachment to their home districts. The structure of the young people's lives was studied on the basis of the…

The Electromechanical Behavior of a Micro-Ring Driven by Traveling Electrostatic Force

PubMed Central

Ye, Xiuqian; Chen, Yibao; Chen, Da-Chih; Huang, Kuo-Yi; Hu, Yuh-Chung

2012-01-01

There is no literature mentioning the electromechanical behavior of micro structures driven by traveling electrostatic forces. This article is thus the first to present the dynamics and stabilities of a micro-ring subjected to a traveling electrostatic force. The traveling electrostatic force may be induced by sequentially actuated electrodes which are arranged around the flexible micro-ring. The analysis is based on a linearized distributed model considering the electromechanical coupling effects between electrostatic force and structure. The micro-ring will resonate when the traveling speeds of the electrostatic force approach some critical speeds. The critical speeds are equal to the ratio of the natural frequencies to the wave number of the correlative natural mode of the ring. Apart from resonance, the ring may be unstable at some unstable traveling speeds. The unstable regions appear not only near the critical speeds, but also near some fractions of some critical speeds differences. Furthermore the unstable regions expand with increasing driving voltage. This article may lead to a new research branch on electrostatic-driven micro devices. PMID:22438705

System and method for changing a glove attached to a glove box

DOEpatents

Aluisi, Alan

2001-01-01

A system for changing the gloves of a glove box. The system requires the use of a new glove and a glove change ring to form a temporary secondary barrier to the exchange of atmospheres between the inner glove box and the room in which the glove box is operated. The system describes specific means for disengaging a used glove from the glove box port. The means for disengaging the used glove include use of a glove change hook and use of a glove with an attached tab for use in removal. A method for changing the gloves of a glove box is also described.

Double swivel toggle release

NASA Technical Reports Server (NTRS)

King, Guy L.; Schneider, William C.

1989-01-01

A pyrotechnic actuated structural release device is disclosed which is mechanically two fault tolerant for release. The device comprises a fastener plate and fastener body each attachable to one of a pair of structures to be joined. The fastener plate and the fastener body are fastened by a dual swivel toggle member. The toggle member is supported at one end on the fastener plate and mounted for universal pivotal movement thereon. Its other end is received in a central opening in the fastener body, and has a universally mounted retainer ring member. The toggle member is restrained by three retractable latching pins symmetrically disposed in equiangular spacing about the axis of the toggle member and positionable in latching engagement with the retainer ring member on the toggle member. Each pin is retractable by a pyrotechnic charge, the expanding gases of which are applied to a pressure receiving face on the latch pins to effect retraction from the ring member. While retraction of all three pins releases the ring member, the fastener is mechanically two fault tolerant since the failure of any single one or pair of the latch pins to retract results in an asymmetrical loading on the ring member and its dual pivotal movement ensures a release.

The fission yeast cytokinetic contractile ring regulates septum shape and closure

PubMed Central

Thiyagarajan, Sathish; Munteanu, Emilia Laura; Arasada, Rajesh; Pollard, Thomas D.; O'Shaughnessy, Ben

2015-01-01

ABSTRACT During cytokinesis, fission yeast and other fungi and bacteria grow a septum that divides the cell in two. In fission yeast closure of the circular septum hole by the β-glucan synthases (Bgs) and other glucan synthases in the plasma membrane is tightly coupled to constriction of an actomyosin contractile ring attached to the membrane. It is unknown how septum growth is coordinated over scales of several microns to maintain septum circularity. Here, we documented the shapes of ingrowing septum edges by measuring the roughness of the edges, a measure of the deviation from circularity. The roughness was small, with spatial correlations indicative of spatially coordinated growth. We hypothesized that Bgs-mediated septum growth is mechanosensitive and coupled to contractile ring tension. A mathematical model showed that ring tension then generates almost circular septum edges by adjusting growth rates in a curvature-dependent fashion. The model reproduced experimental roughness statistics and showed that septum synthesis sets the mean closure rate. Our results suggest that the fission yeast cytokinetic ring tension does not set the constriction rate but regulates septum closure by suppressing roughness produced by inherently stochastic molecular growth processes. PMID:26240178

The fission yeast cytokinetic contractile ring regulates septum shape and closure.

PubMed

Thiyagarajan, Sathish; Munteanu, Emilia Laura; Arasada, Rajesh; Pollard, Thomas D; O'Shaughnessy, Ben

2015-10-01

During cytokinesis, fission yeast and other fungi and bacteria grow a septum that divides the cell in two. In fission yeast closure of the circular septum hole by the β-glucan synthases (Bgs) and other glucan synthases in the plasma membrane is tightly coupled to constriction of an actomyosin contractile ring attached to the membrane. It is unknown how septum growth is coordinated over scales of several microns to maintain septum circularity. Here, we documented the shapes of ingrowing septum edges by measuring the roughness of the edges, a measure of the deviation from circularity. The roughness was small, with spatial correlations indicative of spatially coordinated growth. We hypothesized that Bgs-mediated septum growth is mechanosensitive and coupled to contractile ring tension. A mathematical model showed that ring tension then generates almost circular septum edges by adjusting growth rates in a curvature-dependent fashion. The model reproduced experimental roughness statistics and showed that septum synthesis sets the mean closure rate. Our results suggest that the fission yeast cytokinetic ring tension does not set the constriction rate but regulates septum closure by suppressing roughness produced by inherently stochastic molecular growth processes. © 2015. Published by The Company of Biologists Ltd.

Cryptosporidium meleagridis in an Indian ring-necked parrot (Psittacula krameri).

PubMed

Morgan, U M; Xiao, L; Limor, J; Gelis, S; Raidal, S R; Fayer, R; Lal, A; Elliot, A; Thompson, R C

2000-03-01

To perform a morphological and genetic characterisation of a Cryptosporidium infection in an Indian ring-necked parrot (Psittacula krameri) and to compare this with C meleagridis from a turkey. Tissue and intestinal sections from an Indian ring-necked parrot were examined microscopically for Cryptosporidium. The organism was also purified from the crop and intestine, the DNA extracted and a portion of the 18S rDNA gene amplified, sequenced and compared with sequence and biological information obtained for C meleagridis from a turkey as well as sequence information for other species of Cryptosporidium. Morphological examination of tissue sections from an Indian ring-necked parrot revealed large numbers of Cryptosporidium oocysts attached to the apical border of enterocytes lining the intestinal tract. Purified Cryptosporidium oocysts measured about 5.1 x 4.5 microns, which conformed morphologically to C meleagridis. The sequence obtained from this isolate was identical to sequence information obtained from a C meleagridis isolate from a turkey. Cryptosporidium meleagridis was detected in an Indian ring-necked parrot using morphological and molecular methods. This is the first time that this species of Cryptosporidium has been reported in a non-galliform host and extends the known host range of C meleagridis.

Attachment-Focused Psychotherapy and the Wounded Self.

PubMed

Spiegel, Eric B

2016-07-01

The concept of the "wounded self" (Wolfe, 2005) offers an integrative theoretical framework for self-wounds and their developmental origins. Alladin (2013, 2014, 2016) integrated hypnotherapy into this model to comprehensively address the unconscious protective mechanisms and maladaptive conscious cognitive strategies of the wounded self. The purpose of this article is to propose how an attachment-focused psychotherapy could be utilized in working with the wounded self. With its emphasis on developmental maturation through the frame of the attachment relationship, attachment theory is well-positioned to offer conceptual and treatment insights in treating the wounded self. E. B. Spiegel's (2016) attunement, representation, and mentalization approach to attachment-focused psychotherapy described how hypnosis can be utilized across attachment processes of attunement, representation, and mentalization toward structural maturation and developmental repair of patients with histories of complex relational trauma. In this article, the attunement, representation, and mentalization attachment approach and associated interventions are further explicated in the treatment of self-wounds in the borderline and narcissistic spectrums of personality organization. These principles of conceptualization and treatment interventions are then applied in a case example.

Constant-Pressure Hydraulic Pump

NASA Technical Reports Server (NTRS)

Galloway, C. W.

1982-01-01

Constant output pressure in gas-driven hydraulic pump would be assured in new design for gas-to-hydraulic power converter. With a force-multiplying ring attached to gas piston, expanding gas would apply constant force on hydraulic piston even though gas pressure drops. As a result, pressure of hydraulic fluid remains steady, and power output of the pump does not vary.

General view of the Aft Rocket Motor mated with the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Rocket Motor mated with the External Tank Attach Ring and Aft Skirt Assembly in the process of being mounted onto the Mobile Launch Platform in the Vehicle Assembly Building at Kennedy Space Center. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

General view of the Aft Rocket Motor mated with the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Rocket Motor mated with the External Tank Attach Ring and Aft Skirt Assembly being transported from the Rotation Processing and Surge Facility to the Vehicle Assembly Building at Kennedy Space Center. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

29. DETAIL OF OUTLET DUCTS FOR MST AIRCONDITIONING SYSTEM IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. DETAIL OF OUTLET DUCTS FOR MST AIR-CONDITIONING SYSTEM IN NORTHWEST CORNER OF SLC-3W MST STATION 70.5 (LOWEST PAYLOAD SERVICE STATION). NOTE RING ATTACHMENT FOR PERSONNEL SAFETY HARNESS IN LEFT FOREGROUND. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

KSC00pp1913

NASA Image and Video Library

2000-12-14

A KSC solid rocket booster worker inspects the reusable cables and connectors located inside the external tank attachment ring on the STS-98 left-hand solid rocket booster. Inspection and X-ray analysis of the ordnance-related cable connectors is required as part of an evaluation of their flight readiness before Space Shuttle Atlantis can rollout to Launch Pad 39A

KSC-00pp1913

NASA Image and Video Library

2000-12-14

A KSC solid rocket booster worker inspects the reusable cables and connectors located inside the external tank attachment ring on the STS-98 left-hand solid rocket booster. Inspection and X-ray analysis of the ordnance-related cable connectors is required as part of an evaluation of their flight readiness before Space Shuttle Atlantis can rollout to Launch Pad 39A

Filter holder and gasket assembly for candle or tube filters

DOEpatents

Lippert, T.E.; Alvin, M.A.; Bruck, G.J.; Smeltzer, E.E.

1999-03-02

A filter holder and gasket assembly are disclosed for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut. 9 figs.

29 CFR 1926.959 - Lineman's body belts, safety straps, and lanyards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... tool pockets. On shifting D belts, this measurement for pocket tabs shall be taken when the D ring section is centered. (3) A maximum of four (4) tool loops shall be so situated on the body belt that four... of tool loops, and any other attachments. (4) Suitable copper, steel, or equivalent liners shall be...

75 FR 16648 - Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

.... Subsequent investigation revealed extensive damage to the elevator tab control system. Severe vibration in... and right elevator control tab mechanisms for gaps between the swage ring and the aft attach lug, and... replacing any discrepant elevator tab control mechanism, including performing the detailed inspection on the...

Attachment, Autonomy, and Emotional Reliance: A Multilevel Model

ERIC Educational Resources Information Center

Lynch, Martin F.

2013-01-01

This article reports a test of a multilevel model investigating how attachment security and autonomy contribute to emotional reliance, or the willingness to seek interpersonal support. Participants ("N" = 247) completed online measures of attachment, autonomy, emotional reliance, and vitality with respect to several everyday…

Parent-Child Attachment and Emotion Regulation

ERIC Educational Resources Information Center

Brumariu, Laura E.

2015-01-01

Given the centrality of both parent-child attachment and emotion regulation in children's development and adjustment, it is important to evaluate the relations between these constructs. This article discusses conceptual and empirical links between attachment and emotion regulation in middle childhood, highlights progress and challenges in the…

A School's Journey in Creating a Relational Environment Which Supports Attachment and Emotional Security

ERIC Educational Resources Information Center

Webber, Louise

2017-01-01

This article focuses on teachers' experiences of supporting looked after and adopted children in one case study primary school in England. Children who are looked after and adopted may have a disrupted attachment with their primary carer which has resulted in an insecure attachment. Children with insecure attachments can feel anxious, uncertain…

The low photo-inactivation rate of bacteria in human plasma II. Inhibition of methylene blue bleaching in plasma and effective bacterial destruction by the addition of dilute acetic acid to human plasma.

PubMed

Chen, Jie; Cesario, Thomas C; Li, Runze; Er, Ali O; Rentzepis, Peter M

2015-10-01

Methylene blue (MB) and other photo-sensitizer molecules have been recognized as effective means for the inactivation of bacteria and other pathogens owing to their ability to photo-generate reactive oxygen species (ROS) including singlet oxygen. These reactive species react with the membrane of the bacteria causing their destruction. However, the efficiency of MB to destroy bacteria in plasma is very low because the MB 660 nm absorption band, that is responsible for the ROS generation, is bleached. The bleaching of MB, in plasma, is caused by the attachment of a hydrogen atom to the central ring nitrogen of MB, which destroys the ring conjugation and forms Leuco-MB which does not absorb in the 600 nm region. In this paper we show that addition of dilute acetic acid, ∼10(-4) M, to human plasma, prevents H-atom attachment to MB, allowing MB to absorb at 660 nm, generates singlet oxygen and thus inactivates bacteria. The mechanism proposed, for preventing MB bleaching in plasma, is based on the oxidation of cysteine to cystine, by reaction with added dilute acetic acid, thus eliminating the availability of the thiol hydrogen atom which attaches to the MB nitrogen. It is expected that the addition of acetic acid to plasma will be effective in the sterilization of plasma and killing of bacteria in wounds and burns.

Crystal structure of (E)-2-hy-droxy-4'-meth-oxy-aza-stilbene.

PubMed

Chantrapromma, Suchada; Kaewmanee, Narissara; Boonnak, Nawong; Chantrapromma, Kan; Ghabbour, Hazem A; Fun, Hoong-Kun

2015-06-01

The title aza-stilbene derivative, C14H13NO2 {systematic name: (E)-2-[(4-meth-oxy-benzyl-idene)amino]-phenol}, is a product of the condensation reaction between 4-meth-oxy-benzaldehyde and 2-amino-phenol. The mol-ecule adopts an E conformation with respect to the azomethine C=N bond and is almost planar, the dihedral angle between the two substituted benzene rings being 3.29 (4)°. The meth-oxy group is coplanar with the benzene ring to which it is attached, the Cmeth-yl-O-C-C torsion angle being -1.14 (12)°. There is an intra-molecular O-H⋯N hydrogen bond generating an S(5) ring motif. In the crystal, mol-ecules are linked via C-H⋯O hydrogen bonds, forming zigzag chains along [10-1]. The chains are linked via C-H⋯π inter-actions, forming a three-dimensional structure.

Large area plasma source

NASA Technical Reports Server (NTRS)

Foster, John (Inventor); Patterson, Michael (Inventor)

2008-01-01

An all permanent magnet Electron Cyclotron Resonance, large diameter (e.g., 40 cm) plasma source suitable for ion/plasma processing or electric propulsion, is capable of producing uniform ion current densities at its exit plane at very low power (e.g., below 200 W), and is electrodeless to avoid sputtering or contamination issues. Microwave input power is efficiently coupled with an ionizing gas without using a dielectric microwave window and without developing a throat plasma by providing a ferromagnetic cylindrical chamber wall with a conical end narrowing to an axial entrance hole for microwaves supplied on-axis from an open-ended waveguide. Permanent magnet rings are attached inside the wall with alternating polarities against the wall. An entrance magnet ring surrounding the entrance hole has a ferromagnetic pole piece that extends into the chamber from the entrance hole to a continuing second face that extends radially across an inner pole of the entrance magnet ring.

Cesium injection system for negative ion duoplasmatrons

DOEpatents

Kobayashi, Maasaki; Prelec, Krsto; Sluyters, Theodorus J

1978-01-01

Longitudinally extending, foraminous cartridge means having a cylindrical side wall forming one flat, circular, tip end surface and an opposite end; an open-ended cavity, and uniformly spaced orifices for venting the cavity through the side wall in the annulus of a plasma ring for uniformly ejecting cesium for coating the flat, circular, surface. To this end, the cavity is filled with a cesium containing substance and attached to a heater in a hollow-discharge duoplasmatron. By coating the flat circular surface with a uniform monolayer of cesium and locating it in an electrical potential well at the end of a hollow-discharge, ion duoplasmatron source of an annular hydrogen plasma ring, the negative hydrogen production from the duoplasmatron is increased. The negative hydrogen is produced on the flat surface of the cartridge and extracted by the electrical potential well along a trajectory coaxial with the axis of the plasma ring.

KSC-2011-6354

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., Lockheed Martin technicians adjust the position of NASA's Gravity Recovery and Interior Laboratory-A (GRAIL-A) lunar probe on the spacecraft adapter ring. GRAIL-B is already secured to the ring, at left. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

Benzamide–picric acid (1/1)

PubMed Central

Sivaramkumar, M. S.; Velmurugan, R.; Sekar, M.; Ramesh, P.; Ponnuswamy, M. N.

2010-01-01

In the title compound, C7H7NO·C6H3N3O7, one of the nitro groups of the picric acid mol­ecule lies in the plane of the attached benzene ring [dihedral angle = 1.4 (1)°] while the other two are twisted away by 9.9 (1) and 30.3 (1)°. In the benzamide mol­ecule, the amide group is almost coplanar with the benzene ring [dihedral angle = 4.4 (1)°]. An intra­molecular O—H⋯O hydrogen bond generates an S6 ring motif. In the crystal, mol­ecules are linked into a ribbon-like structure along the b axis by O—H⋯O and N—H⋯O inter­molecular hydrogen bonds. In addition, C—H⋯O hydrogen bonds and short O⋯O contacts [2.828 (2) Å] are observed. PMID:21588027

Toward an architecture of attachment disorganization: John Bowlby's published and unpublished reflections.

PubMed

Solomon, Judith; Duschinsky, Robbie; Bakkum, Lianne; Schuengel, Carlo

2017-10-01

This article examines the construct of disorganized attachment originally proposed by Main and Solomon, developing some new conjectures based on inspiration from a largely unknown source: John Bowlby's unpublished texts, housed at the Wellcome Trust Library Archive in London (with permission from the Bowlby family). We explore Bowlby's discussions of disorganized attachment, which he understood from the perspective of ethological theories of conflict behavior. Bowlby's reflections regarding differences among the behaviors used to code disorganized attachment will be used to explore distinctions that may underlie the structure of the current coding system. The article closes with an emphasis on the importance Bowlby placed on Popper's distinction between the context of discovery and the context of justification in developmental science.

Attachment Theory and Neuroscience for Care Managers.

PubMed

Blakely, Thomas J; Dziadosz, Gregory M

2016-09-01

This article describes a model for care managers that is based on attachment theory supplemented by knowledge from neuroscience. Together, attachment theory and basic knowledge from neuroscience provide for both an organizing conceptual framework and a scientific, measureable approach to assessment and planning interventions in a care plan.

The effect of packing hydrophilization on bacterial attachment and the relationship with the performance of biotrickling filters.

PubMed

Prado, Oscar J; Popat, Sudeep C; Chen, Gexin; Walker, Sharon L; Lafuente, Javier; Gabriel, David; Deshusses, Marc A

2009-08-15

Many bioprocesses depend on the effective formation of a biofilm on a solid support. In the present study, three different surface treatments (sandblasting, pure-O(2) plasma, and He-O(2) plasma treatments) were conducted on polypropylene (PP) Pall rings used as a support in biotrickling filters for air pollution control. The intent was to modify the ring surface and/or electrochemical properties in order to possibly improve cell adhesion, wetting properties, and possibly reduce the start-up time and increase the performance of the biotrickling filters. The surface treatments were found to generally increase the hydrophilicity and the zeta potential of the surfaces. However, the startup and performance of lab-scale biotrickling filters packed with treated Pall rings were not significantly different than the control with untreated rings. Cell and colloid deposition experiments conducted in flow cells showed that the treated surfaces and the hydrodynamic conditions were not favorable for cell deposition indicating that there could be significant opportunities for improving packings used in environmental bioprocess applications. Copyright 2009 Wiley Periodicals, Inc.

Imaging phase slip dynamics in micron-size superconducting rings

NASA Astrophysics Data System (ADS)

Polshyn, Hryhoriy; Naibert, Tyler R.; Budakian, Raffi

2018-05-01

We present a scanning probe technique for measuring the dynamics of individual fluxoid transitions in multiply connected superconducting structures. In these measurements, a small magnetic particle attached to the tip of a silicon cantilever is scanned over a micron-size superconducting ring fabricated from a thin aluminum film. We find that near the superconducting transition temperature of the aluminum, the dissipation and frequency of the cantilever changes significantly at particular locations where the tip-induced magnetic flux penetrating the ring causes the two lowest-energy fluxoid states to become nearly degenerate. In this regime, we show that changes in the cantilever frequency and dissipation are well-described by a stochastic resonance (SR) process, wherein small oscillations of the cantilever in the presence of thermally activated phase slips (TAPS) in the ring give rise to a dynamical force that modifies the mechanical properties of the cantilever. Using the SR model, we calculate the average fluctuation rate of the TAPS as a function of temperature over a 32-dB range in frequency, and we compare it to the Langer-Ambegaokar-McCumber-Halperin theory for TAPS in one-dimensional superconducting structures.

Binding Modes of Teixobactin to Lipid II: Molecular Dynamics Study.

PubMed

Liu, Yang; Liu, Yaxin; Chan-Park, Mary B; Mu, Yuguang

2017-12-08

Teixobactin (TXB) is a newly discovered antibiotic targeting the bacterial cell wall precursor Lipid II (L II ). In the present work, four binding modes of TXB on L II were identified by a contact-map based clustering method. The highly flexible binary complex ensemble was generated by parallel tempering metadynamics simulation in a well-tempered ensemble (PTMetaD-WTE). In agreement with experimental findings, the pyrophosphate group and the attached first sugar subunit of L II are found to be the minimal motif for stable TXB binding. Three of the four binding modes involve the ring structure of TXB and have relatively higher binding affinities, indicating the importance of the ring motif of TXB in L II recognition. TXB-L II complexes with a ratio of 2:1 are also predicted with configurations such that the ring motif of two TXB molecules bound to the pyrophosphate-MurNAc moiety and the glutamic acid residue of one L II , respectively. Our findings disclose that the ring motif of TXB is critical to L II binding and novel antibiotics can be designed based on its mimetics.

Quantum mechanical design of efficient second-order nonlinear optical materials based on heteroaromatic imido-substituted hexamolybdates: first theoretical framework of POM-based heterocyclic aromatic rings.

PubMed

Janjua, Muhammad Ramzan Saeed Ashraf

2012-11-05

This work was inspired by a previous report (Janjua et al. J. Phys. Chem. A 2009, 113, 3576-3587) in which the nonlinear-optical (NLO) response strikingly improved with an increase in the conjugation path of the ligand and the nature of hexamolybdates (polyoxometalates, POMs) was changed into a donor by altering the direction of charge transfer with a second aromatic ring. Herein, the first theoretical framework of POM-based heteroaromatic rings is found to be another class of excellent NLO materials having double heteroaromatic rings. First hyperpolarizabilities of a large number of push-pull-substituted conjugated systems with heteroaromatic rings have been calculated. The β components were computed at the density functional theory (DFT) level (BP86 geometry optimizations and LB94 time-dependent DFT). The largest β values are obtained with a donor (hexamolybdates) on the benzene ring and an acceptor (-NO(2)) on pyrrole, thiophene, and furan rings. The pyrrole imido-substituted hexamolybdate (system 1c) has a considerably large first hyperpolarizability, 339.00 × 10(-30) esu, and it is larger than that of (arylimido)hexamolybdate, calculated as 0.302 × 10(-30) esu (reference system 1), because of the double aromatic rings in the heteroaromatic imido-substituted hexamolybdates. The heteroaromatic rings act as a conjugation bridge between the electron acceptor (-NO(2)) and donor (polyanion). The introduction of an electron donor into heteroaromatic rings significantly enhances the first hyperpolarizabilities because the electron-donating ability is substantially enhanced when the electron donor is attached to the heterocyclic aromatic rings. Interposing five-membered auxiliary fragments between strong donor (polyanion) or acceptor (-NO(2)) groups results in a large computed second-order NLO response. The present investigation provides important insight into the NLO properties of (heteroaromatic) imido-substituted hexamolybdate derivatives because these compounds exhibit enhanced hyperpolarizabilities compared to typical NLO arylimido hexamolybdates and heterocyclic aromatic rings reported in the literature.

Selenide isotope generators for the Galileo Mission: SIG hermetic bimetal weld transition joint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnett, W.J.

1979-08-01

The successful development of the commercial 6061-T651/Silver/304L explosive clad plate material as a bimetal weld transition joint material, as described herein, satisfies all SIG Galileo design requirements for hermetic weld attachment of stainless steel subassemblies to aluminum alloy generator housing or end cover structures. The application of this type weld transition joint to the hermetic attachment of stainless steel shell connectors is well-developed and tested. Based on on-going life tests of stainless steel receptacle/bimetal ring attachment assemblies and metallurgical characterization studies of this transition joint material, it appears evident that this transition joint material has more than adequate capability tomore » meet the 250 to 300/sup 0/F and 50,000 hr. design life of the SIG/Galileo mission. Its extended life temperture capability may well approach 350 to 400/sup 0/F.« less

Research and Clinical Center for Child Development Annual Report, 1984-1985.

ERIC Educational Resources Information Center

Miyake, Kazuo, Ed.

The seven articles in this annual report concern aspects of attachment, social interaction among parents and children, temperament, affective behavior, and/or research methodology. Aspects of attachment and temperament are addressed in Kazuo Miyake's study of the "Relation of Temperamental Disposition to Classification of Attachment,"…

10 CFR 75.15 - Facility attachments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Facility attachments. 75.15 Section 75.15 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT Material... under Article 39(b) of the main text of the Safeguards Agreement, do not have Facility Attachments or...

10 CFR 75.15 - Facility attachments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Facility attachments. 75.15 Section 75.15 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT Material... under Article 39(b) of the main text of the Safeguards Agreement, do not have Facility Attachments or...

Attachment and Socioemotional Problems in Middle Childhood

ERIC Educational Resources Information Center

Moss, Ellen; Lecompte, Vanessa

2015-01-01

In this article, we will evaluate the evidence concerning links between attachment and behavior problems in the middle childhood period. We will first provide a general introduction to the question of attachment and maladaptation in the middle childhood period, and then examine the recent empirical evidence with respect to both externalizing and…

Cathepsin K activity-dependent regulation of osteoclast actin ring formation and bone resorption.

PubMed

Wilson, Susan R; Peters, Christoph; Saftig, Paul; Brömme, Dieter

2009-01-23

Cathepsin K is responsible for the degradation of type I collagen in osteoclast-mediated bone resorption. Collagen fragments are known to be biologically active in a number of cell types. Here, we investigate their potential to regulate osteoclast activity. Mature murine osteoclasts were seeded on type I collagen for actin ring assays or dentine discs for resorption assays. Cells were treated with cathepsins K-, L-, or MMP-1-predigested type I collagen or soluble bone fragments for 24 h. The presence of actin rings was determined fluorescently by staining for actin. We found that the percentage of osteoclasts displaying actin rings and the area of resorbed dentine decreased significantly on addition of cathepsin K-digested type I collagen or bone fragments, but not with cathepsin L or MMP-1 digests. Counterintuitively, actin ring formation was found to decrease in the presence of the cysteine proteinase inhibitor LHVS and in cathepsin K-deficient osteoclasts. However, cathepsin L deficiency or the general MMP inhibitor GM6001 had no effect on the presence of actin rings. Predigestion of the collagen matrix with cathepsin K, but not by cathepsin L or MMP-1 resulted in an increased actin ring presence in cathepsin K-deficient osteoclasts. These studies suggest that cathepsin K interaction with type I collagen is required for 1) the release of cryptic Arg-Gly-Asp motifs during the initial attachment of osteoclasts and 2) termination of resorption via the creation of autocrine signals originating from type I collagen degradation.

Evidence that dorsally mounted satellite transmitters affect migration chronology of Northern Pintails

USGS Publications Warehouse

Hupp, Jerry W.; Kharitonov, Sergei; Yamaguchi, Noriyuki M.; Ozaki, K.; Flint, Paul L.; Pearce, John M.; Tokita, Ken-ichi; Shimada, Tetsuo; Higuchi, Hiroyoshi

2015-01-01

We compared migration movements and chronology between Northern Pintails (Anas acuta) marked with dorsally mounted satellite transmitters and pintails marked only with tarsus rings. During weekly intervals of spring and autumn migration between their wintering area in Japan and nesting areas in Russia, the mean distance that ringed pintails had migrated was up to 1000 km farther than the mean distance radiomarked pintails migrated. Radiomarked pintails were detected at spring migration sites on average 9.9 days (90 % CI 8.0, 11.8) later than ringed pintails that were recovered within 50 km. Although ringed and radiomarked pintails departed from Japan on similar dates, the disparity in detection of radiomarked versus ringed pintails at shared sites increased 7.7 days (90 % CI 5.2, 10.2) for each 1000 km increase in distance from Japan. Thus, pintails marked with satellite transmitters arrived at nesting areas that were 2500 km from Japan on average 19 days later than ringed birds. Radiomarked pintails were detected at autumn migration stopovers on average 13.1 days (90 % CI 9.8, 16.4) later than ringed birds that were recovered within 50 km. We hypothesize that dorsal attachment of 12–20 g satellite transmitters to Northern Pintails increased the energetic cost of flight, which resulted in more rapid depletion of energetic reserves and shortened the distance pintails could fly without refueling. Radiomarked pintails may have used more stopovers or spent longer periods at stopovers. causing their migration schedule to diverge from ringed pintails. We urge further evaluation of the effects of dorsally mounted transmitters on migration chronology of waterfowl.

3-Ethyl-2-methyl-5-methyl­ene-6,7-di­hydroindol-4(5H)-one

PubMed Central

Sonar, Vijayakumar N.; Parkin, Sean; Crooks, Peter A.

2008-01-01

The title compound, C12H15NO, a degradation product of molindone hydro­chloride, was prepared by the reaction of molindone with methyl iodide and subsequent reaction of the resulting quaternary ammonium salt with 2N aqueous sodium hydroxide. The newly formed double bond is exocyclic in nature and the carbonyl group is conjugated with the π-electrons of the pyrrole ring. The six-membered ring is in the half-chair conformation. The H atom attached to the N atom is involved in an inter­molecular hydrogen bond with the O atom of a screw-related mol­ecule, thus forming a continuous chain. PMID:21200723

Compact and mobile high resolution PET brain imager

DOEpatents

Majewski, Stanislaw [Yorktown, VA; Proffitt, James [Newport News, VA

2011-02-08

A brain imager includes a compact ring-like static PET imager mounted in a helmet-like structure. When attached to a patient's head, the helmet-like brain imager maintains the relative head-to-imager geometry fixed through the whole imaging procedure. The brain imaging helmet contains radiation sensors and minimal front-end electronics. A flexible mechanical suspension/harness system supports the weight of the helmet thereby allowing for patient to have limited movements of the head during imaging scans. The compact ring-like PET imager enables very high resolution imaging of neurological brain functions, cancer, and effects of trauma using a rather simple mobile scanner with limited space needs for use and storage.

46 CFR 160.052-3a - Materials-Dee ring and snap hook assemblies and other instruments of closure for buoyant vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Vest, Unicellular Plastic Foam, Adult and Child § 160.052-3a... must be attached to a support and bear 150 pounds for an adult size and 115 pounds for a child size for...

50 CFR 648.51 - Gear and crew restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... possession on board such vessels shall not exceed 31 ft (9.4 m) measured at the widest point in the bail of..., i.e., the metal ring bag and the mouth frame, or bail, of the dredge are not attached, and such that... through issuance of a letter of authorization. (4) A certified at-sea observer is on board, as required by...

Microgravity Science Glovebox - Glove

NASA Technical Reports Server (NTRS)

1997-01-01

This photo shows a rubber glove and its attachment ring for the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists will use the MSG to carry out multidisciplinary studies in combustion science, fluid physics and materials science. The MSG is managed by NASA's Marshall Space Flight Center (MSFC). Photo Credit: NASA/MSFC

Microgravity

NASA Image and Video Library

1997-03-11

This photo shows a rubber glove and its attachment ring for the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists will use the MSG to carry out multidisciplinary studies in combustion science, fluid physics and materials science. The MSG is managed by NASA's Marshall Space Flight Center (MSFC). Photo Credit: NASA/MSFC

JWST Lifting System

NASA Technical Reports Server (NTRS)

Tolleson, William

2012-01-01

A document describes designing, building, testing, and certifying a customized crane (Lifting Device LD) with a strong back (cradle) to facilitate the installation of long wall panels and short door panels for the GHe phase of the James Webb Space Telescope (JWST). The LD controls are variable-frequency drive controls designed to be adjustable for very slow and very-short-distance movements throughout the installation. The LD has a lift beam with an electric actuator attached at the end. The actuator attaches to a rectangular strong back (cradle) for lifting the long wall panels and short door panels from a lower angle into the vertical position inside the chamber, and then rotating around the chamber for installation onto the existing ceiling and floor. The LD rotates 360 (in very small increments) in both clockwise and counterclockwise directions. Eight lifting pads are on the top ring with 2-in. (.5-cm) eye holes spaced evenly around the ring to allow for the device to be suspended by three crane hoists from the top of the chamber. The LD is operated by remote controls that allow for a single, slow mode for booming the load in and out, with slow and very slow modes for rotating the load.

Stress analysis in oral obturator prostheses: imaging photoelastic

NASA Astrophysics Data System (ADS)

Pesqueira, Aldiéris Alves; Goiato, Marcelo Coelho; dos Santos, Daniela Micheline; Haddad, Marcela Filié; Andreotti, Agda Marobo; Moreno, Amália

2013-06-01

Maxillary defects resulting from cancer, trauma, and congenital malformation affect the chewing efficiency and retention of dentures in these patients. The use of implant-retained palatal obturator dentures has improved the self-esteem and quality of life of several subjects. We evaluate the stress distribution of implant-retained palatal obturator dentures with different attachment systems by using the photoelastic analysis images. Two photoelastic models of the maxilla with oral-sinus-nasal communication were fabricated. One model received three implants on the left side of the alveolar ridge (incisive, canine, and first molar regions) and the other did not receive implants. Afterwards, a conventional palatal obturator denture (control) and two implant-retained palatal obturator dentures with different attachment systems (O-ring; bar-clip) were constructed. Models were placed in a circular polariscope and a 100-N axial load was applied in three different regions (incisive, canine, and first molar regions) by using a universal testing machine. The results were photographed and analyzed qualitatively using a software (Adobe Photoshop). The bar-clip system exhibited the highest stress concentration followed by the O-ring system and conventional denture (control). Images generated by the photoelastic method help in the oral rehabilitator planning.

Kelly mud saver valve sub

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reddoch, J.A.

1986-12-02

A mud saver valve is described for preventing drilling mud from escaping from a kelly when a drill string is broken below the kelly, the valve comprising: a tubular valve body having first and second ends, the first end being provided with means for attachment in fluid communicating relationship with the kelly, the second end being provided with means for attachment to the drill string; an annular seat fixed in the interior of the valve body adjacent its first end; a tubular closure member within the valve body. The closure member is provided with a selectively closed seating end formore » seating in valve closing engagement with the annular seat, an open non-seating end in fluid communicating relationship with the drill string, and an annular expansion in the outer diameter of the closure member adjacent the seating end; a top and bottom spacer ring disposed in sliding relationship around the tubular closure member intermediate the annular expansion and the non-seating end of the closure member. The spacer ring and annular expansion cooperatively define an annular chamber around the closure member; and a helical spring disposed around the closure member towards the annular seat.« less

Toward an architecture of attachment disorganization: John Bowlby’s published and unpublished reflections

PubMed Central

Solomon, Judith; Duschinsky, Robbie; Bakkum, Lianne; Schuengel, Carlo

2017-01-01

This article examines the construct of disorganized attachment originally proposed by Main and Solomon, developing some new conjectures based on inspiration from a largely unknown source: John Bowlby’s unpublished texts, housed at the Wellcome Trust Library Archive in London (with permission from the Bowlby family). We explore Bowlby’s discussions of disorganized attachment, which he understood from the perspective of ethological theories of conflict behavior. Bowlby’s reflections regarding differences among the behaviors used to code disorganized attachment will be used to explore distinctions that may underlie the structure of the current coding system. The article closes with an emphasis on the importance Bowlby placed on Popper’s distinction between the context of discovery and the context of justification in developmental science. PMID:28791871

LLE review. Quarterly report, January 1994--March 1994, Volume 58

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, A.

1994-07-01

This volume of the LLE Review, covering the period Jan - Mar 1994, contains articles on backlighting diagnostics; the effect of electron collisions on ion-acoustic waves and heat flow; using PIC code simulations for analysis of ultrashort laser pulses interacting with solid targets; creating a new instrument for characterizing thick cryogenic layers; and a description of a large-aperture ring amplifier for laser-fusion drivers. Three of these articles - backlighting diagnostics; characterizing thick cryogenic layers; and large-aperture ring amplifier - are directly related to the OMEGA Upgrade, now under construction. Separate abstracts have been prepared for articles from this report.

Reentry static stability characteristics of a (Model 471) .005479-scale 146-inch solid rocket booster tested in the NASA/MSFC 14 by 14 inch TWT (SA8F)

NASA Technical Reports Server (NTRS)

Johnson, J. D.; Braddock, W. F.; Praharaj, S. C.

1975-01-01

A force test of a scale model of the Space Shuttle Solid Rocket Booster was conducted in a trisonic wind tunnel. The model was tested with such protuberances as a camera capsule, electrical tunnel, attach rings, aft separation rockets, ET attachment structure, and hold-down struts. The model was also tested with the nozzle at gimbal angles of 0, 2.5, and 5 degrees. The influence of a unique heat shield configuration was also determined. Some photographs of model installations in the tunnel were taken and are included. Schlieren photography was utilized for several angles of attack.

Pressure-Sensor Assembly Technique

NASA Technical Reports Server (NTRS)

Pruzan, Daniel A.

2003-01-01

Nielsen Engineering & Research (NEAR) recently developed an ultrathin data acquisition system for use in turbomachinery testing at NASA Glenn Research Center. This system integrates a microelectromechanical- systems- (MEMS-) based absolute pressure sensor [0 to 50 psia (0 to 345 kPa)], temperature sensor, signal-conditioning application-specific integrated circuit (ASIC), microprocessor, and digital memory into a package which is roughly 2.8 in. (7.1 cm) long by 0.75 in. (1.9 cm) wide. Each of these components is flip-chip attached to a thin, flexible circuit board and subsequently ground and polished to achieve a total system thickness of 0.006 in. (0.15 mm). Because this instrument is so thin, it can be quickly adhered to any surface of interest where data can be collected without disrupting the flow being investigated. One issue in the development of the ultrathin data acquisition system was how to attach the MEMS pressure sensor to the circuit board in a manner which allowed the sensor s diaphragm to communicate with the ambient fluid while providing enough support for the chip to survive the grinding and polishing operations. The technique, developed by NEAR and Jabil Technology Services Group (San Jose, CA), is described below. In the approach developed, the sensor is attached to the specially designed circuit board, see Figure 1, using a modified flip-chip technique. The circular diaphragm on the left side of the sensor is used to actively measure the ambient pressure, while the diaphragm on the right is used to compensate for changes in output due to temperature variations. The circuit board is fabricated with an access hole through it so that when the completed system is installed onto a wind tunnel model (chip side down), the active diaphragm is exposed to the environment. After the sensor is flip-chip attached to the circuit board, the die is underfilled to support the chip during the subsequent grinding and polishing operations. To prevent this underfill material from getting onto the sensor s diaphragms, the circuit board is fabricated with two 25- micrometer-tall polymer rings, sized so that the diaphragms fit inside the rings once the chip is attached.

Communicating Love or Fear: The Role of Attachment Styles in Pathways to Giftedness

ERIC Educational Resources Information Center

Wellisch, Mimi

2010-01-01

Although both giftedness and secure attachment are associated with advanced language and good socioemotional adjustment, not all gifted children are well adjusted. This article explores the consequences of attachment style on gifted development and examines whether early trauma can be rectified. The dearth of research on giftedness and attachment…

Well Played: The Origins and Future of Playfulness

ERIC Educational Resources Information Center

Gordon, Gwen

2014-01-01

In this article, the author synthesizes research from several disciplines to shed light on play's central role in healthy development. Gordon builds on research in attachment theory that correlates secure attachment in infancy with adult well-being to demonstrate how playfulness might be a lifelong outcome of secure attachment and a primary…

Beginnings and Endings in Social Work Supervision: The Interaction between Attachment and Developmental Processes

ERIC Educational Resources Information Center

Bennett, Susanne; Deal, Kathleen Holtz

2009-01-01

This article discusses the interaction of attachment processes and stages of social work student development within the field supervisory relationship and suggests ways supervisors can modify interactions with students. Attachment theory and research provide a framework for understanding innate capacities of students and the relational dynamics of…

Early Intervention for Families Exposed to Chronic Stress and Trauma: The Attachment Vitamins Program

ERIC Educational Resources Information Center

Hulette, Annmarie C.; Dunham, Mackenzie; Davis, Mindy; Gortney, Jason; Lieberman, Alicia F.

2016-01-01

This article describes the Attachment Vitamins program, a trauma-informed parent group intervention for families with young children. Attachment Vitamins is a relational psychoeducational intervention based on the principles of Child-Parent Psychotherapy (CPP). Its goal is to repair the impact of chronic stress and trauma through strengthening the…

Signet ring cell melanocytic nevus: report of a case over trichilemmal cyst and review of the literature.

PubMed

Sabater Marco, Vicente; Escutia Muñoz, Begoña; Morera Faet, Arturo; Botella Estrada, Rafael

2012-02-01

Different melanocytic nevi have been reported as being associated with dermal cysts. Signet ring cell melanocytic nevus is a rare variant of melanocytic nevus characterized by cells with signet ring morphology within a common melanocytic nevus. This article describes an exceptional case of melanocytic nevus composed exclusively of signet ring cells over a trichilemmal cyst. Histologically, above the cyst, there was a small, symmetrical and sharply demarcated lesion showing a compound proliferation of small, round, monomorphous cells with signet ring morphology. Immunohistochemically, signet ring cells were negative for cytokeratin AE1/3, leukocyte common antigen, HMB-45, and CD34. Occasionally, isolated signet ring cells were positive for S-100 and melan A. Melanocytic nevus composed of signet ring cells should raise the differential diagnosis with other cutaneous tumors exhibiting signet ring cells. Previous cases of this entity reported in the literature are also reviewed.

Development of a microfabricated artificial limbus with micropockets for cell delivery to the cornea.

PubMed

Ortega, Ílida; Deshpande, Pallavi; Gill, Andrew A; MacNeil, Sheila; Claeyssens, Frederik

2013-06-01

The aim of this study was to develop a synthetic alternative to the human corneal limbus for use initially as an ex vivo model in which to study corneal stem cell function within a niche environment and ultimately to develop an implantable limbus for future clinical use. Microstereolithography was used for the fabrication of polyethylene glycol diacrylate (PEGDA) based rings on a macroscopic (1.2 cm) scale containing unique microfeatures (pockets) which were then modified with fibronectin to promote cell adhesion. These rings were designed to mimic the limbal area of the eye containing structures of the approximate size and shape of the stem cell microenvironments found in the palisades of Vogt. The attachment of rabbit limbal fibroblasts and rabbit limbal epithelial cells to the PEGDA rings was increased by pretreating the microfabricated structures with biotinylated fibronectin. Cell outgrowth from fibronectin coated microfabricated structures was 50% greater than from rings without structures or fibronectin coating. The cell loaded rings were then placed on an ex vivo wounded cornea model and the outgrowth of cells to form a multilayered epithelium was observed. We suggest this is a new approach to investigating limbal stem cells niches and the first steps towards a new approach for corneal regeneration.

Put a RING on it: regulation and inhibition of RNF8 and RNF168 RING finger E3 ligases at DNA damage sites

PubMed Central

Bartocci, Cristina; Denchi, Eros Lazzerini

2013-01-01

RING (Really Interesting New Gene) domain-containing E3 ubiquitin ligases comprise a large family of enzymes that in combination with an E2 ubiquitin-conjugating enzyme, modify target proteins by attaching ubiquitin moieties. A number of RING E3s play an essential role in the cellular response to DNA damage highlighting a crucial contribution for ubiquitin-mediated signaling to the genome surveillance pathway. Among the RING E3s, RNF8 and RNF168 play a critical role in the response to double stranded breaks, one of the most deleterious types of DNA damage. These proteins act as positive regulators of the signaling cascade that initiates at DNA lesions. Inactivation of these enzymes is sufficient to severely impair the ability of cells to respond to DNA damage. Given their central role in the pathway, several layers of regulation act at this nodal signaling point. Here we will summarize current knowledge on the roles of RNF8 and RNF168 in maintaining genome integrity with particular emphasis on recent insights into the multiple layers of regulation that act on these enzymes to fine-tune the cellular response to DNA lesions. PMID:23847653

Orbiter escape pole

NASA Technical Reports Server (NTRS)

Goodrich, Winston D. (Inventor); Wesselski, Clarence J. (Inventor); Pelischek, Timothy E. (Inventor); Becker, Bruce H. (Inventor); Kahn, Jon B. (Inventor); Grimaldi, Margaret E. (Inventor); McManamen, John P. (Inventor); Castro, Edgar O. (Inventor)

1989-01-01

A Shuttle type of aircraft (10) with an escape hatch (12) has an arcuately shaped pole housing (16) attachable to an interior wall and ceiling with its open end adjacent to the escape hatch. The pole housing 16 contains a telescopically arranged and arcuately shaped primary pole member (22) and extension pole member (23) which are guided by roller assemblies (30,35). The extension pole member (23) is slidable and extendable relative to the primary pole member (22). For actuation, a spring actuated system includes a spring (52) in the pole housing. A locking member (90) engages both pole members (22,23) through notch portions (85,86) in the pole members. The locking member selectively releases the extension pole member (23) and the primary pole member (22). An internal one-way clutch or anti-return mechanism prevents retraction of the extension pole member from an extended position. Shock absorbers (54)(150,152) are for absoring the energy of the springs. A manual backup deployment system is provided which includes a canted ring (104) biased by a spring member (108). A lever member (100) with a slot and pin connection (102) permits the mechanical manipulation of the canted ring to move the primary pole member. The ring (104) also prevents retraction of the main pole. The crew escape mechanism includes a magazine (60) and a number of lanyards (62), each lanyard being mounted by a roller loop (68) over the primary pole member (22). The strap on the roller loop has stitching for controlled release, a protection sheath (74) to prevent tangling and a hook member (69) for attachment to a crew harness.

Temporary Thermocouple Attachment for Thermal/Vacuum Testing at Non-Extreme Temperatures - Test Results

NASA Technical Reports Server (NTRS)

Wright, Sarah E.; Ungar, Eugene K.

2017-01-01

Post-test examination and data analysis that followed a two week long vacuum test showed that numerous self-stick thermocouples became detached from the test article. The thermocouples were reattached with thermally conductive epoxy and the test was repeated to obtain the required data. Because the thermocouple detachment resulted in significant expense and rework, it was decided to investigate the temporary attachment methods used around NASA and to perform a test to assess their efficacy. The present work describes the testing that was performed in early and mid-2017. The test article and the temporary thermocouple attachment methods tested are described. During the first test, fully half of the thermocouples detached - although the detachment showed subtly in the data for some. The second test was performed to confirm the data from the first test and to investigate the effect of test article and thermocouple grounding. The results of the testing over temperatures ranging from -150 to 200degF are detailed and preliminary recommendations are made for temporary thermocouple attachment methods.

A series of structurally simple chloroquine chemosensitizing dibemethin derivatives that inhibit chloroquine transport by PfCRT.

PubMed

Zishiri, Vincent K; Hunter, Roger; Smith, Peter J; Taylor, Dale; Summers, Robert; Kirk, Kiaran; Martin, Rowena E; Egan, Timothy J

2011-05-01

A series of 12 new dibemethin (N-benzyl-N-methyl-1-phenylmethanamine) derivatives bearing an N-aminomethyl group attached to the one phenyl ring and an H, Cl, OCH3 or N(CH3)2 group on the other have been synthesized. These compounds all showed strong chloroquine chemosensitizing activity, comparable to verapamil, when present at 1 μM in an in vitro culture of the chloroquine-resistant W2 strain of the human malaria parasite, Plasmodium falciparum. Their N-formylated derivatives also exhibited resistance-reversing activity, but only at substantially higher IC10 concentrations. A number of the dibemethin derivatives were shown to inhibit chloroquine transport via the parasite's 'chloroquine resistance transporter' (PfCRT) in a Xenopus laevis oocyte expression system. The reduced resistance-reversing activity of the formylated compounds relative to their free amine counterparts can probably be ascribed to two factors: decreased accumulation of the formylated dibemethins within the parasite's internal digestive vacuole (believed to be the site of action of chloroquine), and a reduced ability to inhibit PfCRT. The resistance-reversing activity of the compounds described here demonstrates that the amino group need not be attached to the two aromatic rings via a three or four carbon chain as has been suggested by previous QSAR studies. These compounds may be useful as potential side chains for attaching to a 4,7-dichloroquinoline group in order to generate new resistance-reversing chloroquine analogues with inherent antimalarial activity. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Chronic diseases as predictors of labour market attachment after participation in subsidised re-employment programme: a 6-year follow-up study.

PubMed

Nwaru, Chioma A; Peutere, Laura; Kivimäki, Mika; Pentti, Jaana; Vahtera, Jussi; Virtanen, Pekka J

2017-11-01

Little is known about the work patterns of re-employed people. We investigated the labour market attachment trajectories of re-employed people and assessed the influence of chronic diseases on these trajectories. The study was based on register data of 18 944 people (aged 18-60 years) who participated in a subsidised re-employment programme in Finland. Latent class growth analysis with zero-inflated Poisson was used to model the labour market attachment trajectories over a 6-year follow-up time. Multinomial logistic regression was used to examine the associations between chronic diseases and labour market attachment trajectories, adjusting for age, gender, educational level, size of town and calendar year in subsidised re-employment programme. We identified four distinct labour market attachment trajectories, namely: strengthening (a relatively stable attachment throughout the follow-up time; 77%), delayed (initial weak attachment increasing later; 6%), leavers (attachment declined with time; 10%) and none-attached (weak attachment throughout the study period; 7%). We found that severe mental problems strongly increased the likelihood of belonging in the leavers (OR 3.61; 95% CI 2.23 to 5.37) and none-attached (OR 3.41; 95% CI 1.91 to 6.10) trajectories, while chronic hypertension was associated with none-attached (OR 1.37; 95% CI 1.06 to 1.77) trajectory. The associations between other chronic diseases (diabetes, heart disease, asthma and arthritics) and labour market attachment trajectories were less evident. Re-employed people appear to follow distinct labour market attachment trajectories over time. Having chronic diseases, especially mental disorders appear to increase the risk for relatively poor labour market attachment. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A Conceptual Application of Attachment Theory and Research to the Social Work Student-Field Instructor Supervisory Relationship

ERIC Educational Resources Information Center

Bennett, Susanne; Saks, Loretta Vitale

2006-01-01

This article conceptualizes an attachment-based model of the student-field instructor relationship, based on empirical research concerning internal working models of attachment, which continue into adulthood and serve as templates for life-long relating. Supportive relationships within a noncritical context are salient for effective supervision;…

46 CFR 160.047-3a - Materials-Dee ring and snap hook assemblies and other instruments of closure for buoyant vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Vest, Kapok or Fibrous Glass, Adult and Child § 160.047-3a... must be attached to a support and bear 150 pounds for an adult size and 115 pounds for a child size for...

29 CFR 1915.158 - Lifesaving equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... floating vessels under 200 feet (61 m) in length, at least one 30-inch (0.76 m) U.S. Coast Guard approved ring life buoy with line attached shall be located at the gangway. (3) At least one 30-inch (0.76 m) U... pursuant to 46 CFR part 160 (Type I, II, III, or V PFD) and marked for use as a work vest, for commercial...

29 CFR 1915.158 - Lifesaving equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... floating vessels under 200 feet (61 m) in length, at least one 30-inch (0.76 m) U.S. Coast Guard approved ring life buoy with line attached shall be located at the gangway. (3) At least one 30-inch (0.76 m) U... pursuant to 46 CFR part 160 (Type I, II, III, or V PFD) and marked for use as a work vest, for commercial...

29 CFR 1915.158 - Lifesaving equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... floating vessels under 200 feet (61 m) in length, at least one 30-inch (0.76 m) U.S. Coast Guard approved ring life buoy with line attached shall be located at the gangway. (3) At least one 30-inch (0.76 m) U... pursuant to 46 CFR part 160 (Type I, II, III, or V PFD) and marked for use as a work vest, for commercial...

Modeling FtsZ ring formation in the bacterial cell-anisotropic aggregation via mutual interactions of polymer rods.

PubMed

Fischer-Friedrich, Elisabeth; Gov, Nir

2011-04-01

The cytoskeletal protein FtsZ polymerizes to a ring structure (Z ring) at the inner cytoplasmic membrane that marks the future division site and scaffolds the division machinery in many bacterial species. FtsZ is known to polymerize in the presence of GTP into single-stranded protofilaments. In vivo, FtsZ polymers become associated with the cytoplasmic membrane via interaction with the membrane-binding proteins FtsA and ZipA. The FtsZ ring structure is highly dynamic and undergoes constantly polymerization and depolymerization processes and exchange with the cytoplasmic pool. In this theoretical study, we consider a scenario of Z ring self-organization via self-enhanced attachment of FtsZ polymers due to end-to-end interactions and lateral interactions of FtsZ polymers on the membrane. With the assumption of exclusively circumferential polymer orientations, we derive coarse-grained equations for the dynamics of the pool of cytoplasmic and membrane-bound FtsZ. To capture stochastic effects expected in the system due to low particle numbers, we simulate our computational model using a Gillespie-type algorithm. We obtain ring- and arc-shaped aggregations of FtsZ polymers on the membrane as a function of monomer numbers in the cell. In particular, our model predicts the number of FtsZ rings forming in the cell as a function of cell geometry and FtsZ concentration. We also calculate the time of FtsZ ring localization to the midplane in the presence of Min oscillations. Finally, we demonstrate that the assumptions and results of our model are confirmed by 3D reconstructions of fluorescently-labeled FtsZ structures in E. coli that we obtained.

Metal-chelating polymers by anionic ring-opening polymerization and their use in quantitative mass cytometry.

PubMed

Illy, Nicolas; Majonis, Daniel; Herrera, Isaac; Ornatsky, Olga; Winnik, Mitchell A

2012-08-13

Metal-chelating polymers (MCPs) are important reagents for multiplexed immunoassays based on mass cytometry. The role of the polymer is to carry multiple copies of individual metal isotopes, typically as lanthanide ions, and to provide a reactive functionality for convenient attachment to a monoclonal antibody (mAb). For this application, the optimum combination of chain length, backbone structure, end group, pendant groups, and synthesis strategy has yet to be determined. Here we describe the synthesis of a new type of MCP based on anionic ring-opening polymerization of an activated cyclopropane (the diallyl ester of 1,1-cyclopropane dicarboxylic acid) using a combination of 2-furanmethanethiol and a phosphazene base as the initiator. This reaction takes place with rigorous control over molecular weight, yielding a polymer with a narrow molecular weight distribution, reactive pendant groups for introducing a metal chelator, and a functional end group with orthogonal reactivity for attaching the polymer to the mAbs. Following the ring-opening polymerization, a two-step transformation introduced diethylenetriaminepentaacetic acid (DTPA) chelating groups on each pendant group. The polymers were characterized by NMR, size exclusion chromatography (SEC), and thermogravimetric analysis (TGA). The binding properties toward Gd(3+) as a prototypical lanthanide (Ln) ion were also studied by isothermal titration calorimetry (ITC). Attachment to a mAb involves a Diels-Alder reaction of the terminal furan with a bismaleimide, followed by a Michael addition of a thiol on the mAb, generated by mild reduction of a disulfide bond in the hinge region. Polymer samples with a number average degree of polymerization of 35, with a binding capacity of 49.5 ± 6 Ln(3+) ions per chain, were loaded with 10 different types of Ln ions and conjugated to 10 different mAbs. A suite of metal-tagged Abs was tested by mass cytometry in a 10-plex single cell analysis of human adult peripheral blood, allowing us to quantify the antibody binding capacity of 10 different cell surface antigens associated with specific cell types.

QM-8 final performance evaluation report: SEALS, volume 4

NASA Technical Reports Server (NTRS)

Nelsen, L. V.

1989-01-01

The Space Shuttle Redesigned Solid Rocket Motor (RSRM) static test of Qualification Motor-8 (QM-8) was conducted. The QM-8 test article was the fifth full-scale, full-duration test, and the third qualification motor to incorporate the redesigned case field joint and nozzle-to-case joint. This was the second static test conducted in the T-97 test facility, which is equipped with actuators for inducing external side loads to a 360 degree external tank (ET) attach ring during test motor operation, and permits heating/cooling of an entire motor. The QM-8 motor was cooled to a temperature which ensured that the maximum propellant mean bulk temperature (PMBT) of 40 F was achieved at firing. All test results are not included, but rather, the performance of the metal case, field joints, and nozzle-to-case joint is addressed. The involvement is studied of the Structural Applications and Structural Design Groups with the QM-8 test which includes: assembly procedures of the field and nozzle-to-case joints, joint leak check results, structural test results, and post-test inspection evaluations.

Successful implantation of physiologically functional bioengineered mouse internal anal sphincter.

PubMed

Raghavan, Shreya; Miyasaka, Eiichi A; Hashish, Mohamed; Somara, Sita; Gilmont, Robert R; Teitelbaum, Daniel H; Bitar, Khalil N

2010-08-01

We have previously developed bioengineered three-dimensional internal anal sphincter (IAS) rings from circular smooth muscle cells isolated from rabbit and human IAS. We provide proof of concept that bioengineered mouse IAS rings are neovascularized upon implantation into mice of the same strain and maintain concentric smooth muscle alignment, phenotype, and IAS functionality. Rings were bioengineered by using smooth muscle cells from the IAS of C57BL/6J mice. Bioengineered mouse IAS rings were implanted subcutaneously on the dorsum of C57BL/6J mice along with a microosmotic pump delivering fibroblast growth factor-2. The mice remained healthy during the period of implantation, showing no external signs of rejection. Mice were killed 28 days postsurgery and implanted IAS rings were harvested. IAS rings showed muscle attachment, neovascularization, healthy color, and no external signs of infection or inflammation. Assessment of force generation on harvested IAS rings showed the following: 1) spontaneous basal tone was generated in the absence of external stimulation; 2) basal tone was relaxed by vasoactive intestinal peptide, nitric oxide donor, and nifedipine; 3) acetylcholine and phorbol dibutyrate elicited rapid-rising, dose-dependent, sustained contractions repeatedly over 30 min without signs of muscle fatigue; and 4) magnitudes of potassium chloride-induced contractions were 100% of peak maximal agonist-induced contractions. Our preliminary results confirm the proof of concept that bioengineered rings are neovascularized upon implantation. Harvested rings maintain smooth muscle alignment and phenotype. Our physiological studies confirm that implanted rings maintain 1) overall IAS physiology and develop basal tone, 2) integrity of membrane ionic characteristics, and 3) integrity of membrane associated intracellular signaling transduction pathways for contraction and relaxation by responding to cholinergic, nitrergic, and VIP-ergic stimulation. IAS smooth muscle tissue could thus be bioengineered for the purpose of implantation to serve as a potential graft therapy for dysfunctional internal anal sphincter in fecal incontinence.

Rugged Iris Mechanism

NASA Technical Reports Server (NTRS)

Ferragut, Nelson J.

2005-01-01

A rugged iris mechanism has been designed to satisfy several special requirements, including a wide aperture in the "open" position, full obscuration in the "closed" position, ability to function in a cryogenic or other harsh environment, and minimization of friction through minimization of the number of components. An important element of the low-friction aspect of the design is maximization of the flatness of, and provision of small gaps between, adjacent iris blades. The tolerances of the design can be very loose, accommodating thermal expansions and contractions associated with large temperature excursions. The design is generic in that it is adaptable to a wide range of aperture sizes and can be implemented in a variety of materials to suit the thermal, optical, and mechanical requirements of various applications. The mechanism (see figure) includes an inner flat ring, an outer flat ring, and an even number of iris blades. The iris blades shown in front in the figure are denoted as "upper," and the iris blades shown partly hidden behind the front ones are denoted as "lower." Each iris blade is attached to the inner ring by a pivot assembly and to the outer ring by a roller/slider assembly. The upper and lower rings are co-centered and are kept in sliding contact. The iris is opened or closed by turning the outer ring around the center while holding the inner ring stationary. The mechanism is enclosed in a housing (not shown in the figure) that comprises an upper and a lower housing shell. The housing provides part of the sliding support for the outer ring and keeps the two rings aligned as described above. The aforementioned pivot assemblies at the inner ring also serve as spacers for the housing. The lower housing shell contains part of the lower sliding surface and features for mounting the overall mechanism and housing assembly. The upper housing shell contains part of the upper sliding surface.

Efficient authentication scheme based on near-ring root extraction problem

NASA Astrophysics Data System (ADS)

Muthukumaran, V.; Ezhilmaran, D.

2017-11-01

An authentication protocolis the type of computer communication protocol or cryptography protocol specifically designed for transfer of authentication data between two entities. We have planned a two new entity authentication scheme on the basis of root extraction problem near-ring in this article. We suggest that this problem is suitably difficult to serve as a cryptographic assumption over the platform of near-ring N. The security issues also discussed.

Photometry of occultation candidate stars. I - Uranus 1985 and Saturn 1985-1991

NASA Technical Reports Server (NTRS)

French, L. M.; Morales, G.; Dalton, A. S.; Klavetter, J. J.; Conner, S. R.

1985-01-01

Photometric observations of five stars to be occulted by the rings around Uranus are presented. The four stars to be occulted by Saturn or its rings during the period 1985-1991 were also observed. The observations were carried out with a CCD detector attached to the Kitt Peak McGraw-Hill 1.30-m telescope. Landolt standards of widely ranging V-I color indices were used to determine the extinction coefficients, transformation coefficients, and zero points of the stars. Mean extinction coefficients are given for each night of observation. K magnitudes for each star were estimated on the basis of the results of Johnson (1967). The complete photometric data set is given in a series of tables.

Method and apparatus for making an optical element having a dielectric film

NASA Technical Reports Server (NTRS)

Augason, Gordon C. (Inventor)

1987-01-01

A film-application device (FAD) comprising a pair of exterior, tapered, O-ring bearing plate members and a central plate member for simplifying the process of thermally bonding a thin dielectric film to a substrate comprising an optical element are discussed. In use, the film is sandwiched between the O rings and stretched across the optical element by squeezing the exterior plates together before bonding to the element. The film may be used for protecting the optical element or to reduce surface reflection of radiation. The FAD may also be used without the center plate to stretch a dielectric film prior to its attachment to or insertion in a holder to make pellicles or beam-splitters.

Wave-packet rectification in nonlinear electronic systems: A tunable Aharonov-Bohm diode

PubMed Central

Li, Yunyun; Zhou, Jun; Marchesoni, Fabio; Li, Baowen

2014-01-01

Rectification of electron wave-packets propagating along a quasi-one dimensional chain is commonly achieved via the simultaneous action of nonlinearity and longitudinal asymmetry, both confined to a limited portion of the chain termed wave diode. However, it is conceivable that, in the presence of an external magnetic field, spatial asymmetry perpendicular to the direction of propagation suffices to ensure rectification. This is the case of a nonlinear ring-shaped lattice with different upper and lower halves (diode), which is attached to two elastic chains (leads). The resulting device is mirror symmetric with respect to the ring vertical axis, but mirror asymmetric with respect to the chain direction. Wave propagation along the two diode paths can be modeled for simplicity by a discrete Schrödinger equation with cubic nonlinearities. Numerical simulations demonstrate that, thanks to the Aharonov-Bohm effect, such a diode can be operated by tuning the magnetic flux across the ring. PMID:24691462

(E)-4-Meth-oxy-N'-(2,4,5-tri-meth-oxy-benzyl-idene)benzohydrazide hemihydrate.

PubMed

Chantrapromma, Suchada; Boonnak, Nawong; Horkaew, Jirapa; Quah, Ching Kheng; Fun, Hoong-Kun

2014-02-01

The title compound crystallizes as a hemihydrate, C18H20N2O5·0.5H2O. The mol-ecule exists in an E conformation with respect to the C=N imine bond. The 4-meth-oxy-phenyl unit is disordered over two sets of sites with a refined occupancy ratio of 0.54 (2):0.46 (2). The dihedral angles between the benzene rings are 29.20 (9) and 26.59 (9)°, respectively, for the major and minor components of the 4-meth-oxy-substituted ring. All meth-oxy substituents lie close to the plane of the attached benzene rings [the Cmeth-yl-O-C-C torsion angles range from -4.0 (12) to 3.9 (2)°]. In the crystal, the components are linked into chains propagating along [001] via N-H⋯O and O-H⋯O hydrogen bonds and weak C-H⋯O inter-actions.

GC-MS and GC-IR Analyses of the Methoxy-1-n-pentyl-3-(1-naphthoyl)-indoles: Regioisomeric Designer Cannabinoids.

PubMed

Thaxton-Weissenfluh, Amber; Belal, Tarek S; DeRuiter, Jack; Smith, Forrest; Abiedalla, Younis; Neel, Logan; Abdel-Hay, Karim M; Clark, C Randall

2018-06-16

The indole ring regioisomeric methoxy-1-n-pentyl-3-(1-naphthoyl)-indoles represent indole ring-substituted analogs of the synthetic cannabinoid JWH-018. The electron ionization mass spectra show equivalent regioisomeric major fragments resulting from cleavage of the groups attached to the central indole nucleus. The characteristic (M-17)+ fragment ion at m/z 354 resulting from the loss of OH group is significant in the mass spectra of all four compounds. Fragmentation of the naphthoyl and/or pentyl groups yields the cations at m/z 314, 300, 244 and 216. The vapor-phase infrared spectra provide a number of characteristic absorption bands to identify the individual isomers. Gas chromatographic separations on a capillary column containing a film of trifluoropropylmethyl polysiloxane (Rtx-200) provided excellent resolution of these compounds, their precursor indoles and intermediate pentylindoles. The elution order appears related to the degree of crowding of indole ring substituents.

In Vitro Antifungal Activity of New and Known Geranylated Phenols against Phytophthora cinnamomi Rands.

PubMed

Chavez, María I; Soto, Mauricio; Cimino, Franco A; Olea, Andrés F; Espinoza, Luis; Díaz, Katy; Taborga, Lautaro

2018-05-29

A series of new and known geranylated phenol/methoxyphenol derivatives has been tested in vitro as inhibitor agents of mycelial growth of Phytophthora cinnamomi . The activity of tested compounds is correlated with the nature, number, and position of the substituent group on the aromatic ring. Results indicate that the most active geranylated derivatives are those having two hydroxyl groups (or one ⁻OH and one ⁻OCH₃) attached to the aromatic ring. Interestingly, these derivatives are as active as Metalaxil ® , a commonly used commercial fungicide. Thus, our results suggest that some of these compounds might be of agricultural interest due to their potential use as fungicides against P. cinnamomi . The effect of structure on fungicide activity is discussed in terms of electronic distribution on both the aromatic ring and side geranyl chain. All tested compounds have been synthesized by direct coupling of geraniol and the respective phenol. Interestingly, new digeranylated derivatives were obtained by increasing the reaction time.

N-(4-Meth-oxy-phen-yl)-6-methyl-2-phenyl-5-{[4-(tri-fluoro-meth-yl)anilino]meth-yl}pyrimidin-4-amine.

PubMed

Cieplik, Jerzy; Pluta, Janusz; Bryndal, Iwona; Lis, Tadeusz

2013-11-27

The title compound, C26H23F3N4O, crystallizes with two symmetry-independent mol-ecules in the asymmetric unit, denoted A and B, which differ mainly in the rotation of the meth-oxy-phenyl ring. The -CF3 group of mol-ecule B is disordered by rotation, with the F atoms split over two sets of sites; the occupancy factor for the major component is 0.853 (4). The dihedral angles between the pyrimidine ring and the attached phenyl, meth-oxy-phenyl and tri-fluoro-methyl-phenyl rings are 8.1 (2), 37.5 (2) and 70.7 (2)°, respectively, in mol-ecule A, and 9.3 (2), 5.3 (2) and 79.7 (2)° in mol-ecule B. An intra-molecular N-H⋯N hydrogen bond occurs in each mol-ecule. In the crystal, two crystallographically independent mol-ecules associate into a dimer via a pair of N-H⋯N hydrogen bonds, with a resulting R 2 (2)(12) ring motif and π-π stacking inter-actions [centroid-centroid distance = 3.517 (4) Å] between the pyrimidine rings. For the A mol-ecules, there are inter-molecular C-H⋯O hydrogen bonds between an aryl C atom of meth-oxy-phenyl ring and a meth-oxy O atom of an adjacent mol-ecule. A similar inter-action is lacking in the B mol-ecules.

Anterior subcutaneous internal fixation for treatment of unstable pelvic fractures

PubMed Central

2014-01-01

Background Fractures of the pelvic ring including disruption of the posterior elements in high-energy trauma have both high morbidity and mortality rates. For some injury pattern part of the initial resuscitation includes either external fixation or plate fixation to close the pelvic ring and decrease blood loss. In certain situations – especially when associated with abdominal trauma and the need to perform laparotomies – both techniques may put the patient at risk of either pintract or deep plate infections. We describe an operative approach to percutaneously close and stabilize the pelvic ring using spinal implants as an internal fixator and report the results in a small series of patients treated with this technique during the resuscitation phase. Findings Four patients were treated by subcutaneous placement of an internal fixator. Screw fixation was carried out by minimally invasive placement of two supra-acetabular iliac screws. Afterwards, a subcutaneous transfixation rod was inserted and attached to the screws after reduction of the pelvic ring. All patients were allowed to fully weight-bear. No losses of reduction or deep infections occurred. Fracture healing was uneventful in all cases. Conclusion Minimally invasive fixation is an alternative technique to stabilize the pelvic ring. The clinical results illustrate that this technique is able to achieve good results in terms of maintenance of reduction the pelvic ring. Also, abdominal surgeries no longer put the patient at risk of infected pins or plates. PMID:24606833

Competing Classical and Quantum Effects in Shape Relaxation of a Metallic Nanostructure

NASA Technical Reports Server (NTRS)

Chen, Dongmin; Okamoto, Hiroshi; Yamada, Toshishi; Biegel, Bryan (Technical Monitor)

2003-01-01

We demonstrate for the first time that the quantum size effect (QSE) plays a competing role along side the classical thermodynamic effect in the shape relaxation of a small metallic island. Together, these effects transforms a lead(Pb) island grown on Si(111) substrate from its initially flattop faceted morphology to a peculiar ring-shape island, a process catalysed by the tip electric field of a scanning tunnelling microscope (STM). We shall show for the first time how QSE affects the relaxation process dynamically. In particular, it leads to a novel strip-flow growth and double-step growth on selective strips of a plateau inside the ring, defined by the substrate steps more than 60?0?3 below. It appears that atoms diffusing on the plateau can clearly (sub i)(deg)sense(sub i)+/- the quantized energy states inside the island and have preferentially attached to regions that further reduces the surface energy as a result of the QSE, limiting its own growth and stabilizing the ring shape. The mechanism proposed here offers a sound explanation for ring shape metal and semiconductor islands observed in other systems as well.

1-(2,4-Di-nitro-phen-yl)-2-[(E)-(3,4,5-tri-meth-oxy-benzyl-idene)]hydrazine.

PubMed

Chantrapromma, Suchada; Ruanwas, Pumsak; Boonnak, Nawong; Chidan Kumar, C S; Fun, Hoong-Kun

2014-02-01

Mol-ecules of the title compound, C16H16N4O7, are not planar with a dihedral angle of 5.50 (11)° between the substituted benzene rings. The two meta-meth-oxy groups of the 3,4,5-tri-meth-oxy-benzene moiety lie in the plane of the attached ring [Cmeth-yl-O-C-C torsion angles -0.1 (4)° and -3.7 (3)°] while the para-meth-oxy substituent lies out of the plane [Cmeth-yl-O-C-C, -86.0 (3)°]. An intra-molecular N-H⋯O hydrogen bond involving the 2-nitro substituent generates an S(6) ring motif. In the crystal structure, mol-ecules are linked by weak C-H⋯O inter-actions into screw chains, that are arranged into a sheet parallel to the bc plane. These sheets are connected by π-π stacking inter-actions between the nitro and meth-oxy substituted aromatic rings with a centroid-centroid separation of 3.9420 (13) Å. C-H⋯π contacts further stabilize the two-dimensional network.

Rotatable electric cable connecting system

NASA Technical Reports Server (NTRS)

Manges, D. R. (Inventor)

1985-01-01

A cable reel assembly is described which is particularly adapted for, but not limited to, a system for providing electrical connection of power and data signals between an orbiter vehicle, such as a space shuttle, and a recovered satellite. The assembly is comprised of two mutually opposing ring type structures having 180 deg relative rotation with one of the structures being held in fixed position while the other structure is rotatable. Motor controlled berthing latches and umbilical cable connectors for the satellite are located on the rim of the rotatable ring structure. The electrical cable assembly is fed in two sections from the orbiter vehicle into the outer rim portion of the fixed ring structure where they are directed inwardly and attached to two concentrically coiled metal bands whose respective ends are secured to inner and outer post members of circular sets of guide pins located on opposing circular plate members, one rotatable and one fixed. The cable sections are fed out as three output cable sections through openings in the central portion of the circular plate of the rotatable ring structure where they are directed to the latches and connectors located on its rim.

Article of Clothing for Storing and Deploying a Scarf

NASA Technical Reports Server (NTRS)

Romero, Robert (Inventor)

2015-01-01

A clothing article surrounds a wearer's upper torso. The article includes connected front portion, a collar. A sleeve is formed in the front portion. A jacket, and coat with an attachable/detachable scarf will be folded and stored in the inter portion of the front side of the collar area with elastic at each end and Velcro onto the inner portion of your collar, therefore eliminating the lost of them by any consumers, and especially children. A sleeve like collar attached to the coat and jacket for storing a scarf and making it easily deployable while in use.

Attachment Style and Dysfunctional Career Thoughts: How Attachment Style Can Affect the Career Counseling Process

ERIC Educational Resources Information Center

van Ecke, Yolanda

2007-01-01

This article examines the relationship between attachment style, measured by Experiences in Close Relationships-Revised (R C. Fraley, N. G. Waller, & K. A. Brennan, 2000), and dysfunctional career thoughts, measured by the Career Thoughts Inventory (CTI; J. P. J. Sampson, G. W. Peterson, J. G. Lenz, R. C. Reardon, & D. E. Saunders, 1994a).…

A Behavioral Perspective of Childhood Trauma and Attachment Issues: Toward Alternative Treatment Approaches for Children with a History of Abuse

ERIC Educational Resources Information Center

Prather, Walter; Golden, Jeannie A.

2009-01-01

Attachment theory provides a useful conceptual framework for understanding trauma and the treatment of children who have been abused. This article examines childhood trauma and attachment issues from the perspective of behavior analysis, and provides a theoretical basis for two alternative treatment models for previously abused children and their…

Eating disorders in adolescence: attachment issues from a developmental perspective

PubMed Central

Gander, Manuela; Sevecke, Kathrin; Buchheim, Anna

2015-01-01

In the present article we review findings from an emerging body of research on attachment issues in adolescents with eating disorders from a developmental perspective. Articles for inclusion in this review were identified from PsychINFO (1966–2013), Sciencedirect (1970–2013), Psychindex (1980–2013), and Pubmed (1980–2013). First, we will outline the crucial developmental changes in the attachment system and discuss how they might be related to the early onset of the disease. Then we will report on the major results from attachment studies using self-report and narrative instruments in that age group. Studies with a developmental approach on attachment will be analyzed in more detail. The high incidence of the unresolved attachment pattern in eating disorder samples is striking, especially for patients with anorexia nervosa. Interestingly, this predominance of the unresolved category was also found in their mothers. To date, these transgenerational aspects are still poorly understood and therefore represent an exciting research frontier. Future studies that include larger adolescent samples and provide a more detailed description including symptom severity and comorbidity would contribute to a better understanding of this complex and painful condition. PMID:26321974

Rapid Chemoselective Bioconjugation Through the Oxidative Coupling of Anilines and Aminophenols

PubMed Central

Behrens, Christopher R.; Hooker, Jacob M.; Obermeyer, Allie C.; Romanini, Dante W.; Katz, Elan M.; Francis, Matthew B.

2012-01-01

A highly efficient protein bioconjugation method is described involving the addition of anilines to o-aminophenols in the presence of sodium periodate. The reaction takes place in aqueous buffer at pH 6.5 and can reach high levels of completion in 2–5 min. The product of the reaction has been characterized using X-ray crystallography, which revealed that an unprecedented oxidative ring contraction occurs after the coupling step. The compatibility of the reaction with protein substrates has been demonstrated through the attachment of small molecules, polymer chains, and peptides to p-aminophenylalanine residues introduced into viral capsids through amber stop codon suppression. The coupling of anilines to o-aminophenol groups derived from tyrosine residues is also described. The compatibility of this method with thiol modification chemistry is shown through the attachment of a near-IR fluorescent chromophore to cysteine residues inside the viral capsid shells, followed by the attachment of integrin-targeting RGD peptides to anilines on the exterior surface. PMID:21919497

Article mounting and position adjustment stage

DOEpatents

Cutburth, R.W.; Silva, L.L.

1988-05-10

An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

Article mounting and position adjustment stage

DOEpatents

Cutburth, Ronald W.; Silva, Leonard L.

1988-01-01

An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

General view of the Aft Solid Rocket Motor Segment mated ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the Aft Solid Rocket Motor Segment mated with the Aft Skirt Assembly and External Tank Attach Ring in the Rotation Processing and Surge Facility at Kennedy Space Center and awaiting transfer to the Vehicle Assembly Building where it will be mounted onto the Mobile Launch Platform. - Space Transportation System, Solid Rocket Boosters, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Ceramic blade attachment system

DOEpatents

Boyd, Gary L.

1995-01-01

A retainer ring is arranged to mount turbine blades to a turbine disk so that aerodynamic forces produced by a gas turbine engine are transferred from the turbine blades to the turbine disk to cause the turbine blades and turbine disk to rotate, but so that centrifugal forces of the turbine blades resulting from the rotation of the turbine blades and turbine disk are not transferred from the turbine blades to the turbine disk.

M1078 Hybrid Hydraulic Vehicle Fuel Economy Evaluation

DTIC Science & Technology

2012-09-01

intermediate starts and stops on a dry concrete surface free from any lose material without stalling, slipping , overheating, or upsetting. 6.93...speed, lockable transfer case, which transmits power via driveshafts to the front and rear ring and pinion sets, differentials, and axles. Wheel hub...of transmission housing and turbine shaft to hydraulically orient and seal the transmission and provide attachment to the input pump motor. With the

Supercavitating Vehicle Control

DTIC Science & Technology

2008-10-10

herein as winglets , are supported by a strut attached to the vehicle. The angle of attack of each winglet is controlled by a winglet actuator. The... winglet assembly may be extended into or retracted from the water by means of a spring-loaded actuated mount, which pivots the strut supporting the... winglet . When fully retracted, the winglet assembly is contained completely within the cavity. [0014] The segmented ring wing is controlled by one or more

Search for global-minimum geometries of medium-sized germanium clusters. II. Motif-based low-lying clusters Ge21-Ge29

NASA Astrophysics Data System (ADS)

Yoo, S.; Zeng, X. C.

2006-05-01

We performed a constrained search for the geometries of low-lying neutral germanium clusters GeN in the size range of 21⩽N⩽29. The basin-hopping global optimization method is employed for the search. The potential-energy surface is computed based on the plane-wave pseudopotential density functional theory. A new series of low-lying clusters is found on the basis of several generic structural motifs identified previously for silicon clusters [S. Yoo and X. C. Zeng, J. Chem. Phys. 124, 054304 (2006)] as well as for smaller-sized germanium clusters [S. Bulusu et al., J. Chem. Phys. 122, 164305 (2005)]. Among the generic motifs examined, we found that two motifs stand out in producing most low-lying clusters, namely, the six/nine motif, a puckered-hexagonal-ring Ge6 unit attached to a tricapped trigonal prism Ge9, and the six/ten motif, a puckered-hexagonal-ring Ge6 unit attached to a bicapped antiprism Ge10. The low-lying clusters obtained are all prolate in shape and their energies are appreciably lower than the near-spherical low-energy clusters. This result is consistent with the ion-mobility measurement in that medium-sized germanium clusters detected are all prolate in shape until the size N ˜65.

Surface-initiated ring-opening metathesis polymerization (SI-ROMP) to attach a tethered organic corona onto CdSe/ZnS core/shell quantum dots

PubMed Central

Vatansever, Fatma; Hamblin, Michael R.

2016-01-01

Core–shell CdSe/ZnS quantum dots (QDs) are useful as tunable photostable fluorophores for multiple applications in industry, biology, and medicine. However, to achieve the optimum optical properties, the surface of the QDs must be passivated to remove charged sites that might bind extraneous substances and allow aggregation. Here we describe a method of growing an organic polymer corona onto the QD surface using the bottom-up approach of surface-initiated ring-opening metathesis polymerization (SI-ROMP) with Grubbs catalyst. CdSe/ZnS QDs were first coated with mercaptopropionic acid by displacing the original trioctylphosphine oxide layer, and then reacted with 7-octenyl dimethyl chlorosilane. The resulting octenyl double bonds allowed the attachment of ruthenium alkylidene groups as a catalyst. A subsequent metathesis reaction with strained bicyclic monomers (norbornene-dicarbonyl chloride (NDC), and a mixture of NDC and norbornenylethylisobutyl-polyhedral oligomeric silsesquioxane (norbornoPOSS)) allowed the construction of tethered organic homo-polymer or co-polymer layers onto the QD. Compounds were characterized by FT-IR, 1H-NMR, X-ray photoelectron spectroscopy, differential scanning calorimetry, and transmission electron microscopy. Atomic force microscopy showed that the coated QDs were separate and non-aggregated with a range of diameter of 48–53 nm. PMID:28360819

TssA forms a gp6-like ring attached to the type VI secretion sheath.

PubMed

Planamente, Sara; Salih, Osman; Manoli, Eleni; Albesa-Jové, David; Freemont, Paul S; Filloux, Alain

2016-08-01

The type VI secretion system (T6SS) is a supra-molecular bacterial complex that resembles phage tails. It is a killing machine which fires toxins into target cells upon contraction of its TssBC sheath. Here, we show that TssA1 is a T6SS component forming dodecameric ring structures whose dimensions match those of the TssBC sheath and which can accommodate the inner Hcp tube. The TssA1 ring complex binds the T6SS sheath and impacts its behaviour in vivo In the phage, the first disc of the gp18 sheath sits on a baseplate wherein gp6 is a dodecameric ring. We found remarkable sequence and structural similarities between TssA1 and gp6 C-termini, and propose that TssA1 could be a baseplate component of the T6SS Furthermore, we identified similarities between TssK1 and gp8, the former interacting with TssA1 while the latter is found in the outer radius of the gp6 ring. These observations, combined with similarities between TssF and gp6N-terminus or TssG and gp53, lead us to propose a comparative model between the phage baseplate and the T6SS. © 2016 The Authors. Published under the terms of the CC BY 4.0 license.

FtsZ rings and helices: physical mechanisms for the dynamic alignment of biopolymers in rod-shaped bacteria.

PubMed

Fischer-Friedrich, Elisabeth; Friedrich, Benjamin M; Gov, Nir S

2012-02-01

In many bacterial species, the protein FtsZ forms a cytoskeletal ring that marks the future division site and scaffolds the division machinery. In rod-shaped bacteria, most frequently membrane-attached FtsZ rings or ring fragments are reported and occasionally helices. By contrast, axial FtsZ clusters have never been reported. In this paper, we investigate theoretically how dynamic FtsZ aggregates align in rod-shaped bacteria. We study systematically different physical mechanisms that affect the alignment of FtsZ polymers using a computational model that relies on autocatalytic aggregation of FtsZ filaments at the membrane. Our study identifies a general tool kit of physical and geometrical mechanisms by which rod-shaped cells align biopolymer aggregates. Our analysis compares the relative impact of each mechanism on the circumferential alignment of FtsZ as observed in rod-shaped bacteria. We determine spontaneous curvature of FtsZ polymers and axial confinement of FtsZ on the membrane as the strongest factors. Including Min oscillations in our model, we find that these stabilize axial and helical clusters on short time scales, but promote the formation of an FtsZ ring at the cell middle at longer times. This effect could provide an explanation to the long standing puzzle of transiently observed oscillating FtsZ helices in Escherichia coli cells prior to cell division.

Electrical Engineering (Selected Articles).

DTIC Science & Technology

1980-05-15

Homopolar Machine with Sodium-Potassium Ring-Shaped Contacts, by L.A. Sukhanov , G.A. Karmonov .......... 19 ACCESSION forWht hieSeto NTISuf ecine 1DOCS...3663 FACE 19 DIFECT-CURRENT HOMOPOLAS AACHIhI ITH SCIIUM-ECIASSIUM RING-SHAPED CONTACTS L. A. Sukhanov , Cand. tech. sciences, G. A. Karmanov, eng. ThA

Attachment within life history theory: an evolutionary perspective on individual differences in attachment.

PubMed

Szepsenwol, Ohad; Simpson, Jeffry A

2018-03-15

In this article, we discuss theory and research on how individual differences in adult attachment mediate the adaptive calibration of reproductive strategies, cognitive schemas, and emotional expression and regulation. We first present an integration of attachment theory and life history theory. Then, we discuss how early harsh and/or unpredictable environments may promote insecure attachment by hampering parents' ability to provide sensitive and reliable care to their children. Finally, we discuss how, in the context of harsh and/or unpredictable environments, different types of insecure attachment (i.e. anxiety and avoidance) may promote evolutionary adaptive reproductive strategies, cognitive schemas, and emotional expression and regulation profiles. Copyright © 2018 Elsevier Ltd. All rights reserved.

Group psychotherapy and neuro-plasticity: an attachment theory perspective.

PubMed

Flores, Philip J

2010-10-01

This article selectively highlights relevant areas of neuroscience research which have direct application for attachment theory and group psychotherapy. Emerging evidence from the neurosciences is revealing that the developing brain of the infant, sculpted by the earliest attachment relationships, continues to be malleable in adulthood and can be profoundly influenced by ongoing relationships throughout one's lifespan. Advances in the neurosciences are also supporting the idea that strong attachment bonds and external interpersonal interactions that arise within the context of these attachments are registered as a person's neurophysiology and neurobiology. Attachment theory in particular provides a common language and conceptual framework from which the contributions from the neurosciences can be made applicable to group psychotherapy.

Molecular mechanics calculations on deaminooxytocin and on deamino-arginine-vasopressin and its analogues

NASA Astrophysics Data System (ADS)

Liwo, A.; Tempczyk, A.; Grzonka, Z.

1989-01-01

The backbone conformations of the cyclic moieties of 1-[ β-mercaptopropionic acid]-oxytocin ([Mpa1]-OT), [1- β-mercaptopropionic acid]-arginine-vasopressin ([Mpa1]-AVP), [1-( β'-mercapto- β,β-cyclopentamethylene)propionic acid]-arginine-vasopressin ([Cpp1]-AVP), and [1-thiosalicylic acid]-arginine-vasopressin ([Ths1]-AVP) have been analyzed by means of molecular mechanics. In these calculations, the side chains were simulated by pseudoatoms. For the three last compounds, the calculations were also performed on the whole molecules, in order to shed light on the differences in their biological activity. Their starting conformations were obtained by attaching the acyclic tail and side chains to the lowest energy conformations of the cyclic parts. In the case of [Ths1]-AVP, however, other starting conformations were also examined, which were obtained by attaching the planar benzene ring to the lowest energy conformations of [Mpa1]-AVP. In the calculations, all the degrees of freedom were relaxed and Weiner's force field was used, the parameters required for the benzene parts of [Ths1]-AVP being determined from the experimental data available, as well as from the results of molecular dynamics calculations on the model compounds. The lowest energy conformations of [Mpa1]-AVP and [Cpp1]-AVP are similar, while [Ths1]-AVP differs from them near the disulphide region, due to the presence of a planar benzene ring. Interactions involving the charged guanidine group of arginine make, in each case, an important contribution to the conformational energy. A model description of the shapes of the oxytocin and vasopressin ring has been proposed, which is based on the cyclohexane geometry. This description is in good correlation with the energetics of the conformations corresponding to different shapes.

Structural insights, protein-ligand interactions and spectroscopic characterization of isoformononetin

NASA Astrophysics Data System (ADS)

Srivastava, Anubha; Singh, Harshita; Mishra, Rashmi; Dev, Kapil; Tandon, Poonam; Maurya, Rakesh

2017-04-01

Isoformononetin, a methoxylated isoflavone present in medicinal plants, has non-estrogenic bone forming effect via differential mitogen-activated protein kinase (MAPK) signaling. Spectroscopic (FT-Raman, FT-IR, UV-vis and NMR spectra) and quantum chemical calculations using density functional theory (DFT) and 6-311++G(d,p) as a large basis set have been employed to study the structural and electronic properties of isoformononetin. A detailed conformational analysis is performed to determine the stability among conformers and the various possibilities of intramolecular hydrogen bonding formation. Molecular docking studies with different protein kinases were performed on isoformononetin and previously studied isoflavonoid, formononetin in order to understand their inhibitory nature and the effect of functional groups on osteogenic or osteoporosis associated proteins. It is found that the oxygen atoms of methoxy, hydroxyl groups attached to phenyl rings R1, R3 and carbonyl group attached to pyran ring R2, play a major role in binding with the protein kinases that is responsible for the osteoporosis; however, no hydrophobic interactions are observed between rings of ligand and protein. The electronic properties such as HOMO and LUMO energies were determined by time-dependent TD-DFT which predict that conformer II is a little bit more stable and chemically low reactive than conformer I of isoformononetin. To estimate the structure-activity relationship, the molecular electrostatic potential (MEP) surface map, and reactivity descriptors are calculated from the optimized geometry of the molecule. From these results, it is also found that isoformononetin is kinetically more stable, less toxic, weak electrophile and chemically less reactive than formononetin. The atoms in molecules and natural bond orbital analysis are applied for the detailed analysis of intra and intermolecular hydrogen bonding interactions.

The use and limitations of attachment theory in child psychotherapy.

PubMed

Zilberstein, Karen

2014-03-01

Attachment theory and research has proliferated in recent years, spawning new ideas and applications to child therapy. Some of those interventions are creative and useful and rest on solid theory and research, whereas others derive from tenuous assumptions. As an important developmental construct, attachment plays a role in every therapy, but defining that role can be difficult. Therapists must recognize the significance of attachment in treatment but not at the expense of recognizing and treating other issues. This article provides an overview of attachment theory and attachment-based interventions and discusses how to apply those constructs to therapeutic work with children. It reviews attachment theory, assessment, and treatments, and discusses how attachment-focused interventions can be combined with other therapeutic needs and methods. It also considers limitations in the current clinical application of attachment and makes recommendations for further research. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

A Net of Friends: Investigating Friendship by Integrating Attachment Theory and Social Network Analysis.

PubMed

Gillath, Omri; Karantzas, Gery C; Selcuk, Emre

2017-11-01

The current article focuses on attachment style-an individual difference widely studied in the field of close relationships-and its application to the study of social networks. Specifically, we investigated whether attachment style predicts perception and management of social networks. In Study 1, we examined the associations of attachment style with perceptions of network tie strength and multiplexity. In Studies 2a and 2b, we investigated the association between attachment style and network management skills (initiating, maintaining, and dissolving ties) and whether network management skills mediated the associations of attachment style with network tie strength and multiplexity. In Study 3, experimentally enhancing attachment security made people more likely to initiate and less likely to dissolve social ties (for the latter, especially among those high on avoidance or anxiety). As for maintenance, security priming also increased maintenance; however, mainly among people high on attachment anxiety or low on attachment avoidance.

New Child-Caregiver Attachment Relationships: Entering Childcare when the Caregiver Is and Is Not an Ethnic Match

ERIC Educational Resources Information Center

Howes, Carollee; Shivers, Eva Marie

2006-01-01

The goal of the research reported in this article was to examine the process of forming attachment to caregivers in children new to childcare. We examined child and adult behaviors and the adult's perception of the child at entry, and the ethnic/racial match between the child and caregiver as predictors of attachment relationship quality measured…

A unique method of retention for gum stripper- a case report.

PubMed

Doddamani, Santosh S; T S, Priyanka

2014-12-01

Successful restoration of partially edentulous situations, especially kennedy's class-I, II &IV requires lot of contemporary and conventional treatment approaches. Semi precision attachments play a major role in retention of clinically challenging partially edentulous situation. Attachment retained partial dentures can be one of the successful treatment option in prosthdontics. This article presents a unique technique of retaining gum stripper using semi precision attachments.

The use and abuse of attachment theory in clinical practice with maltreated children, part I: diagnosis and assessment.

PubMed

Allen, Brian

2011-01-01

Debate has ensued regarding the appropriate assessment and diagnosis for school-age children who display severe behavioral problems as a result of previous abuse and neglect within the primary attachment relationship. The current nomenclature recognizes reactive attachment disorder and some clinicians have suggested broader categories of attachment disorder. These attempts at classification are often criticized on empirical grounds; however, often lost in these criticisms is the fact that that these diagnostic approaches often misapply attachment theory and research. This article summarizes the original contributions of John Bowlby and other attachment researchers to our understanding of child development, examines misguided attempts to apply attachment theory to the diagnosis and assessment of maltreated children, and offers a diagnostic conceptualization and assessment recommendations consistent with the available attachment research.

Ring-opening of {sigma}-thienyl and {sigma}-furyl ligands at ditungsten (M=M) centers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chisholm, M.H.; Haubrich, S.T.; Huffman, J.C.

1997-02-19

A series of compounds of formula 1,2-M{sub 2}({sigma}-Th){sub 2}(NMe{sub 2}){sub 4}, 1,has been prepared, where M = Mo and/or W and Th = 2-thienyl[2-Th], 3-thienyl[3-Th], 5-methyl-2-thienyl[2,5-MeTh], and 2-benzothienyl[2-BTh]. Addition of {sup t}BuOH or CF{sub 3}Me{sub 2}COH to hydrocarbon solutions of 1, where M = W, lead to ring-opened products, 2, when the thienyl ligand is attached via the 2-carbon position. No ring-opening occurs for 3-thienyl derivatives. W{sub 2}(OR){sub 5}({mu}-CCH{sub 2}CHCHS)({sigma}-2-Th), 2, where one of the 2-thienyl rings has been opened, has been fully characterized and shown to be derived from a ring-opened {mu}-vinylidene intermediate W{sub 24}/(O{sup t}Bu){sub 4}({mu}-CCHCHCHS)({sigma}-2-Th). The compoundmore » W{sub 2}({sigma}-2-Fu){sub 2}(NMe{sub 2}){sub 4} was prepared and characterized (2-Fu = 2-furyl) and shown to undergo ring-opening in its reaction with {sup t}BuOH to give W{sub 2}(O{sup t}Bu){sub 5}({mu}-CCH{sub 2}CHCHO)({sigma}-2-Fu), 4, in an analogous manner to the 2-Th complex. The complexes 1 (M = W, 2-Th), 2, 3, and 4 have been characterized by single crystal X-ray studies. The results described herein are compared to other ring-opening reactions of S, N, and O organic heterocyclic compounds as models for the activation of S, N, and O containing fossil fuels in hydrodesulfurization (HDS), hydrodenitrogenation (HDN), and hydrodeoxygenation (HDO) processes. 36 refs., 7 figs., 5 tabs.« less

Ring formation in self-focusing of electromagnetic beams in plasmas

NASA Astrophysics Data System (ADS)

Faisal, M.; Mishra, S. K.; Verma, M. P.; Sodha, M. S.

2007-10-01

This article presents a paraxial theory of ring formation as an initially Gaussian beam propagates in a nonlinear plasma, characterized by significant collisional or ponderomotive nonlinearity. Regions in the axial irradiance-(beamwidth)-2 space, for which the ring formation occurs and the paraxial theory is valid, have been characterized; for typical points in these regions the dependence of the beam width parameter and the radial distribution of irradiance on the distance has been specifically investigated and discussed.

Implications of Attachment Theory and Neuroscience for the Psychotherapeutic Treatment of Obesity and Overeating.

PubMed

Weiss, Fran

2018-05-07

This article examines psychological sequelae underlying dysregulated eating in the overweight and obese patient and proposes a psychotherapy approach informed by classical and modern attachment theory, developmental trauma, and neuroscience to address these structural deficits.

The use of attachment theory in the clinical dialogue with patients.

PubMed

Cortina, Mauricio

2013-01-01

Attachment theory specifically addresses the ability to use an attachment figure as a haven of safety and base of exploration. While many other relational issues are important during development, a foundation of trust based on having positive expectations that others will be available when needed is clearly relevant in the practice of psychotherapy. Yet many patients come in with histories of insecure or even disorganized attachment and have suffered different forms of maltreatment. Understanding affect-regulating strategies, defensive processes, and transference and countertransference patterns associated with insecure or disorganized patterns is enormously useful during the clinical exchange. In addition to paying attention to affect regulation strategies, it is important to note that two other motivational systems may become coopted for defensive purposes in order to cope with disorganized attachment: the caregiving system and the ranking system (the latter being the legacy of dominance hierarchies we observe in primates). The other theme in this article is the importance of paying attention to a cooperative and social engagement motivational system (sometimes referred sometimes to as a social or affiliative motive) in building a therapeutic alliance. This prosocial motive is not about safety (attachment) but about sharing and developing positive social relations with others (Cortina & Liotti, 2010). The article explores the significance of building on this cooperative and social engagement system when there is not a foundation of trust based on a secure attachment history.

Attachment at (not to) work: applying attachment theory to explain individual behavior in organizations.

PubMed

Richards, David A; Schat, Aaron C H

2011-01-01

In this article, we report the results of 2 studies that were conducted to investigate whether adult attachment theory explains employee behavior at work. In the first study, we examined the structure of a measure of adult attachment and its relations with measures of trait affectivity and the Big Five. In the second study, we examined the relations between dimensions of attachment and emotion regulation behaviors, turnover intentions, and supervisory reports of counterproductive work behavior and organizational citizenship behavior. Results showed that anxiety and avoidance represent 2 higher order dimensions of attachment that predicted these criteria (except for counterproductive work behavior) after controlling for individual difference variables and organizational commitment. The implications of these results for the study of attachment at work are discussed.

A Novel Shape Memory Alloy Annuloplasty Ring for Minimally Invasive Surgery: Design, Fabrication, and Evaluation

PubMed Central

Purser, Molly F.; Richards, Andrew L.; Cook, Richard C.; Osborne, Jason A.; Cormier, Denis R.; Buckner, Gregory D.

2013-01-01

A novel annuloplasty ring with a shape memory alloy core has been developed to facilitate minimally invasive mitral valve repair. In its activated (austenitic) phase, this prototype ring has comparable mechanical properties to commercial semi-rigid rings. In its pre-activated (martensitic) phase, this ring is flexible enough to be introduced through an 8-mm trocar and easily manipulated with robotic instruments within the confines of a left atrial model. The core is constructed of 0.50 mm diameter NiTi, which is maintained below its martensitic transition temperature (24 °C) during deployment and suturing. After suturing, the ring is heated above its austenitic transition temperature (37 °C, normal human body temperature) enabling the NiTi core to attain its optimal geometry and stiffness characteristics indefinitely. This article summarizes the design, fabrication, and evaluation of this prototype ring. Experimental results suggest that the NiTi core ring could be a viable alternative to flexible bands in robot-assisted minimally invasive mitral valve repair. PMID:20652747

Poly(phenylene)-based anion exchange membrane

DOEpatents

Hibbs, Michael [Albuquerque, NM; Cornelius, Christopher J [Albuquerque, NM; Fujimoto, Cy H [Albuquerque, NM

2011-02-15

A poly(phenylene) compound of copolymers that can be prepared with either random or multiblock structures where a first polymer has a repeat unit with a structure of four sequentially connected phenyl rings with a total of 2 pendant phenyl groups and 4 pendant tolyl groups and the second polymer has a repeat unit with a structure of four sequentially connected phenyl rings with a total of 6 pendant phenyl groups. The second polymer has chemical groups attached to some of the pendant phenyl groups selected from CH.sub.3, CH.sub.2Br, and CH.sub.2N(CH.sub.3).sub.3Br groups. When at least one group is CH.sub.2N(CH.sub.3).sub.3Br, the material functions as an anion exchange membrane.

(E)-2-[2-(3-Nitro­phen­yl)ethen­yl]quinolin-8-ol

PubMed Central

Schulze, Mathias; Seichter, Wilhelm; Weber, Edwin

2013-01-01

In the title compound, C17H12N2O3, the mean planes of the benzene ring and the quinoline moiety are inclined to one another by 11.0 (1)°. The nitro substituent is twisted at an angle of 7.9 (2)° with respect to the attached benzene ring. Intra­molecular O—H⋯N and C—H⋯N hydrogen bonds occur. The crystal is constructed of mol­ecular stacks without involvement of π-stacking inter­actions, but showing inter­stack association via O—H⋯O and C—H⋯O hydrogen bonding. Thus, the supramolecular architecture of the crystal results from stacked molecules stabilized by hydrogen bonding between the stacks. PMID:24454092

Instructions for the use of the CIVM-Jet 4C finite-strain computer code to calculate the transient structural responses of partial and/or complete arbitrarily-curved rings subjected to fragment impact

NASA Technical Reports Server (NTRS)

Rodal, J. J. A.; French, S. E.; Witmer, E. A.; Stagliano, T. R.

1979-01-01

The CIVM-JET 4C computer program for the 'finite strain' analysis of 2 d transient structural responses of complete or partial rings and beams subjected to fragment impact stored on tape as a series of individual files. Which subroutines are found in these files are described in detail. All references to the CIVM-JET 4C program are made assuming that the user has a copy of NASA CR-134907 (ASRL TR 154-9) which serves as a user's guide to (1) the CIVM-JET 4B computer code and (2) the CIVM-JET 4C computer code 'with the use of the modified input instructions' attached hereto.

RING-type E3 ligases: Master manipulators of E2 ubiquitin-conjugating enzymes and ubiquitination

PubMed Central

Metzger, Meredith B.; Pruneda, Jonathan N.; Klevit, Rachel E.; Weissman, Allan M.

2013-01-01

RING finger domain and RING finger-like ubiquitin ligases (E3s), such as U-box proteins, constitute the vast majority of known E3s. RING-type E3s function together with ubiquitin-conjugating enzymes (E2s) to mediate ubiquitination and are implicated in numerous cellular processes. In part because of their importance in human physiology and disease, these proteins and their cellular functions represent an intense area of study. Here we review recent advances in RING-type E3 recognition of substrates, their cellular regulation, and their varied architecture. Additionally, recent structural insights into RING-type E3 function, with a focus on important interactions with E2s and ubiquitin, are reviewed. This article is part of a Special Issue entitled: Ubiquitin-Proteasome System. PMID:23747565

Application of Attachment Theory in Clinical Social Work.

PubMed

Blakely, Thomas Joseph; Dziadosz, Gregory M

2015-11-01

This article proposes the use of attachment theory in clinical social work practice. This theory is very appropriate in this context because of its fit with social work concepts of person-in-situation, the significance of developmental history in the emergence of psychosocial problems, and the content of human behavior in the social environment. A literature review supports the significance of the theory. Included are ideas about how attachment styles and working models may be used in assessment and treatment to help clients achieve a secure attachment style.

A review of attachment theory in the context of adolescent parenting.

PubMed

Flaherty, Serena Cherry; Sadler, Lois S

2011-01-01

The purpose of this article is to review attachment theory and relate the attachment perspective to adolescent mothers and their children. Attachment theory explains positive maternal-infant attachment as a dyadic relationship between the infant and mother that provides the infant with a secure base from which to explore the world. With respect to cognitive, social, and behavioral domains, securely attached infants tend to have more favorable long-term outcomes, while insecurely attached infants are more likely to have adverse outcomes. Adolescent parenthood can disrupt normal adolescent development, and this disruption influences development of the emotional and cognitive capacities necessary for maternal behaviors that foster secure attachment. However, it appears that if specialized supports are in place to facilitate the process of developing attachment, infants of adolescent mothers can obtain higher rates of secure attachment than normative samples in this population. Copyright © 2011 National Association of Pediatric Nurse Practitioners. Published by Mosby, Inc. All rights reserved.

A Unique Method of Retention for Gum Stripper- A Case Report

PubMed Central

T.S., Priyanka

2014-01-01

Successful restoration of partially edentulous situations, especially kennedy’s class-I, II &IV requires lot of contemporary and conventional treatment approaches. Semi precision attachments play a major role in retention of clinically challenging partially edentulous situation. Attachment retained partial dentures can be one of the successful treatment option in prosthdontics. This article presents a unique technique of retaining gum stripper using semi precision attachments. PMID:25654046

In Search of Shared and Nonshared Environmental Factors in Security of Attachment: A Behavior-Genetic Study of the Association between Sensitivity and Attachment Security

ERIC Educational Resources Information Center

Fearon, R. M. Pasco; Van IJzendoorn, Marinus H.; Fonagy, Peter; Bakermans-Kranenburg, Marian J.; Schuengel, Carlo; Bokhorst, Caroline L.

2006-01-01

The current article presents results from a twin study of genetic and environmental components of maternal sensitivity and infant attachment and their association. The sample consisted of 136 twin pairs from 2 sites: Leiden, the Netherlands, and London, UK. Maternal sensitivity was assessed in the home at 9-10 months, and infant attachment…

Huygens Identifies Rings Around Saturn : 350 Years Later

NASA Astrophysics Data System (ADS)

Deau, Estelle; Fulchignoni, M.

2006-09-01

On March 6, 1656, nearly forty years after Galileo discovered a strange object around Saturn and remained enigmatic until this time, a young unknown dutch of the name of Christiaan Huygens published a surprising article entitled "De Saturni luna observatio nova” in which he makes share to the erudite world of the first discovered satellite around Saturn. It finishes this article of only three pages by a logogriph which announces another discovery of which he hopes to be the first author while launching a call to all the astronomers of Europe. This second discovery much more resounding than the first ensured a world fame thereafter to him. We return here on this famous discovery: the identification of the Saturn's rings by the phyical explanation of its changing appearance. 350 years later, the physical assumptions of Huygens are used to understand ring's geometry.

Bi-stem gripping apparatus

NASA Technical Reports Server (NTRS)

Sanders, Fred G. (Inventor)

1988-01-01

This invention relates to devices which grip cylindrical structures and more particularly to a device which has three arcuate gripping members having frictional surfaces for gripping and compressing a bi-stem. The bi-stem gripping apparatus is constructed having a pair of side gripping members, and an intermediate gripping member disposed between them. Sheets of a gum stock silicone rubber with frictional gripping surfaces are bonded to the inner region of the gripping members and provide frictional engagement between the bi-stem and the apparatus. A latch secures the gripping apparatus to a bi-stem, and removable handles are attached, allowing an astronaut to pull the bi-stem from its cassette. A tethering ring on the outside of the gripping apparatus provides a convenient point to which a lanyard may be attached.

Ceramic blade attachment system

DOEpatents

Boyd, G.L.

1995-04-11

A retainer ring is arranged to mount turbine blades to a turbine disk so that aerodynamic forces produced by a gas turbine engine are transferred from the turbine blades to the turbine disk to cause the turbine blades and turbine disk to rotate, but so that centrifugal forces of the turbine blades resulting from the rotation of the turbine blades and turbine disk are not transferred from the turbine blades to the turbine disk. 6 figures.

Vibrational Study of Melatonin and its Radioprotective Activity towards Hydroxyl Radical

NASA Astrophysics Data System (ADS)

Singh, Gurpreet; Kaur, Sarvpreet; Saini, G. S. S.

2011-12-01

Vibrational study of Melatonin (N-acetyl 5-methoxytrypatamin) was done using FTIR and Raman spectroscopy. DFT calculations were employed to the structural analysis of melatonin and to the end products. The theoretical calculations confirmed the different observed vibrational modes. The optimized structure energy calculations of the different end products confirmed the most probable site of the hydroxyl radical attack is the hydrogen attached to nitrogen present in the indole ring.

1-Bromo-1′-(diphenyl­thio­phosphor­yl)­ferrocene

PubMed Central

Štěpnička, Petr; Schulz, Jiří; Císařová, Ivana

2009-01-01

The title compound, [Fe(C5H4Br)(C17H14PS)], crystallizes with two practically undistiguishable mol­ecules in the asymmetric unit, which are related by a non-space-group inversion. The ferrocene-1,1′-diyl units exhibit a regular geometry with negligible tilting and balanced Fe–ring centroid distances, and with the attached substituents assuming conformations close to ideal synclinal eclipsed. PMID:21577736

The use and abuse of attachment theory in clinical practice with maltreated children, part II: treatment.

PubMed

Allen, Brian

2011-01-01

Recent years have witnessed a growing debate about the role of attachment theory in the treatment of maltreated children. Many professional organizations have issued statements against physically restraining children as some attachment therapists promote; however, often lost in these debates is the fundamental issue of what attachment theory and research proposes as the appropriate form of treatment. Given that these attachment therapies are often directed toward maltreated children, it becomes critical for clinicians working with abused and neglected children to understand these issues and recognize unethical and dangerous treatments. This article provides a summary of the theoretical and empirical bases for the use of attachment theory in the treatment of maltreated school-age children, an examination of the ways questionable approaches to treatment have misinterpreted and misapplied attachment theory, and a conceptualization of attachment-based intervention grounded in current theory and research.

Why social attachment and oxytocin protect against addiction and stress: Insights from the dynamics between ventral and dorsal corticostriatal systems.

PubMed

Tops, Mattie; Koole, Sander L; IJzerman, Hans; Buisman-Pijlman, Femke T A

2014-04-01

The present article advances a neurobiological model of the reciprocal associations between social attachment and drug abuse, and social attachment and chronic stress, as overlapping systems are involved in stress coping and social attachment. In terms of coping, responding to a novel stressor or challenge involves initial novelty processing and activation of learning mechanisms that allow habituation to the stressor through familiarization. Similarly, social attachments are initially formed by being attracted by rewarding properties of an as-yet novel individual, and subsequently developing feelings of attachment towards the familiarized individual. Attachment and familiarization increase the availability of "internal working models" for the control of behavior and emotion, which may explain why secure attachments are associated with increased resilience in the face of stress, accompanied by less reactive reward responding (i.e., increased resilience against drug addiction). The present article seeks to illuminate the role of the neuropeptide oxytocin, which may be involved in the overlapping mechanisms of stable attachment formation and stress coping by shifting processing from novelty and reward seeking to appreciation of familiarity. Oxytocin may accomplish this by facilitating a ventral-to-dorsal shift in activation in corticostriatal loops, which produces a shift from a reactive reward drive (wanting) to stable appreciation of familiar social aspects ("liking" or "loving"). The authors suggest that through dopaminergic, serotonergic and endogenous opioid mechanisms, oxytocin is involved in shifting the balance between wanting and liking in corticostriatal loops by facilitating consolidation of social information from ventral reactive reward systems to dorsal internal working models that aid in prospectively selecting optimal actions in the future, increasing resilience in the face of stress and addiction. © 2013.

Numerical integration of the N-body ring problem by recurrent power series

NASA Astrophysics Data System (ADS)

Navarro, Juan F.

2018-02-01

The aim of this article is to present a method for the integration of the equations of motion of the N-body ring problem by means of recurrent power series. We prove that the solution is convergent for any set of initial conditions, excluding those corresponding to binary collisions.

The "Lord of the Rings"--A "Mythos" Applicable in Unsustainable Times?

ERIC Educational Resources Information Center

Morgan, Alun

2010-01-01

This article explores the relevance of J.R.R. Tolkien's "The Lord of the Rings" to environmental education and contemporary concerns about social and environmental injustices. It presents an account of the relationship between Tolkien's environmental biography and those aspects of the story that highlight the connection between his personal…

The Three-Ring Circus of Academia: How to Become the Ringmaster

ERIC Educational Resources Information Center

Toews, Michelle L.; Yazedjian, Ani

2007-01-01

The three-ring circus of academia is made up of research, teaching, and service. It is also characterized by continuous action that must be facilitated by the academic ringmaster. Academic life is more difficult than most anticipate because the responsibilities are time-consuming, diverse, and conflicting. Therefore, this article focuses on…

Playground Panopticism: Ring-Around-the-Children, a Pocketful of Women

ERIC Educational Resources Information Center

Blackford, Holly

2004-01-01

In this article, the author invokes Michel Foucault's analysis of panopticism to understand the performance of mothering in the suburban playground. The mothers in the ring of park benches symbolize the suggestion of surveillance, which Foucault describes as the technology of disciplinary power under liberal ideals of governance. However, the…

Space shuttle development Motor No. 9 (DM-9), volume 1

NASA Technical Reports Server (NTRS)

Garecht, Diane M.

1990-01-01

The results obtained during the December 23, 1987 static firing of the DM-9 test article are presented. The DM-9 full-scale static test article employed redesigned solid rocket motor (RSRM) field joint capture feature hardware with J-seal insulation configuration, and nozzle-to-case joint radial bolt design with bonded insulation configuration. The nozzle incorporated RSRM components, including a thicker cowl with involuted outer boot ring. The nozzle employed redundant and verifiable seals in all five joints, and room temperature vulcanization backfill in three joints. With very few exceptions, the DM-9 test article was flight configuration. The test was conducted under extreme weather conditions: temperature of 25 F and wind at 15 to 20 mph. Ballistics performance values were within specification requirements. The RSRM field joint (J-seal) insulation configuration functioned as predicted with no indication of hot gases reaching the capture feature O-rings. There was a blowhole in the polysulfide adhesive in the nozzle-to-case joint, but no evidence of hot gases past the wiper O-ring. Nozzle design changes appeared to perform nominally, with the exception of the outer boot ring, which suffered partial structural breakup late in the test. Field joint heaters maintained the controlling resistance temperature device temperature within the specified requirements during heater operation. The thrust vector control system operated properly. The redesigned water deluge system, temperature conditioning equipment, and other test support equipment performed as planned.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Safigholi, H; Mashouf, S; Soliman, A

Purpose: To evaluate the improvement in plan quality when various combinations of 192Ir, 60Co, and 169Yb sources are used in combination with a novel direction modulated brachytherapy (DMBT) tandem applicator for high dose rate brachytherapy of cervical cancer. Methods: The proposed DMBT tandem applicator is designed for image-guided adaptive brachytherapy (IGABT), especially MRI, of cervical cancer. It has 6 peripheral holes of 1.3-mm width, grooved along a 5.4-mm diameter nonmagnetic tungsten alloy rod of density 18.0 g/cc, capable of generating directional dose profiles - leading to enhanced dose sculpting capacity through inverse planning. Monte Carlo simulations of the three HDRmore » sources individually inside the DMBT applicator were performed and imported into an in-house developed inverse optimization code. We then performed inverse planning with 14 cervical cancer patients enrolled in EMBRACE study. In all patients, 3D MRI-based planning was performed while utilizing 1) tandem-ring and needles attached-to-ring (7 patients) and 2) tandem-ring and needles both attached-to-ring and free-hand-loaded (7 patients), in accordance with the GEC-ESTRO recommendations. All plans were normalized to receive the same HRCTV D90 and DVH parameters were evaluated. Results: The DMBT tandem was used in all cases. Overall, the combined use of two sources (192Ir-60Co and 192Ir-169Yb, but not 60Co-169Yb) generally produced better quality plans than with the 192Ir source alone in terms of sparing OARs. For example, up to 3.5, 4.4, and 3.9% individual reductions in D2cc were observed for the bladder, rectum, and sigmoid, respectively, between 192Ir-60Co and 192Ir-only plans for patient cases in #1. While up to 5.5, 2.0, and 5.7% individual reductions were observed for patient cases in #2. Conclusion: We have demonstrated that, in addition to “directional modulation” of DMBT, use of multiple sources with sufficient differences in energy can be utilized to achieve additional improvement in plan quality for IGABT of cervical cancer.« less

Opening a spiropyran ring by way of an exciplex intermediate.

PubMed

Benniston, Andrew C; Harriman, Anthony; Howell, Sarah L; Li, Peiyi; Lydon, Donocadh P

2007-02-02

A molecular dyad has been synthesized in which the main chromophore is a 1,4-diethynylated benzene residue terminated with pyrene moieties, this latter unit acting as a single chromophore. A spiropyran group has been condensed to the central phenylene ring so as to position a weak electron donor close to the pyrene unit. Illumination of the pyrene-based chromophore leads to formation of a fluorescent exciplex in polar solvents but pyrene-like fluorescence is observed in nonpolar solvents. The exciplex has a lifetime of a few nanoseconds and undergoes intersystem crossing to the pyrene-like triplet state with low efficiency. Attaching a 4-nitrobenzene group to the open end of the spiropyran unit creates a new route for decay of the exciplex whereby the triplet state of the spiropyran is formed. Nonradiative decay of this latter species results in ring opening to form the corresponding merocyanine species. Rate constants for the various steps have been obtained from time-resolved fluorescence spectroscopy carried out over a modest temperature range. Under visible light illumination, the merocyanine form reverts to the original spiropyran geometry so that the cycle is closed. Energy transfer from the pyrene chromophore to the merocyanine unit leads to an increased rate of ring closure and serves to push the steady-state composition in favor of the spiropyran form.

1-(2,4-Di­nitro­phen­yl)-2-[(E)-(3,4,5-tri­meth­oxy­benzyl­idene)]hydrazine

PubMed Central

Chantrapromma, Suchada; Ruanwas, Pumsak; Boonnak, Nawong; Chidan Kumar, C. S.; Fun, Hoong-Kun

2014-01-01

Mol­ecules of the title compound, C16H16N4O7, are not planar with a dihedral angle of 5.50 (11)° between the substituted benzene rings. The two meta-meth­oxy groups of the 3,4,5-tri­meth­oxy­benzene moiety lie in the plane of the attached ring [Cmeth­yl–O–C–C torsion angles −0.1 (4)° and −3.7 (3)°] while the para-meth­oxy substituent lies out of the plane [Cmeth­yl—O—C—C, −86.0 (3)°]. An intra­molecular N—H⋯O hydrogen bond involving the 2-nitro substituent generates an S(6) ring motif. In the crystal structure, mol­ecules are linked by weak C—H⋯O inter­actions into screw chains, that are arranged into a sheet parallel to the bc plane. These sheets are connected by π–π stacking inter­actions between the nitro and meth­oxy substituted aromatic rings with a centroid–centroid separation of 3.9420 (13) Å. C—H⋯π contacts further stabilize the two-dimensional network. PMID:24764900

Novel and unusual triterpene from Black Cohosh. Determination of structure of 9,10-seco-9,19-cyclolanostane xyloside (cimipodocarpaside) by NMR, IR and Raman spectroscopy and DFT calculations.

PubMed

Jamróz, Marta K; Jamróz, Michał H; Dobrowolski, Jan Cz; Gliński, Jan A; Davey, Matthew H; Wawer, Iwona

2011-01-01

A new triterpene xyloside, designated cimipodocarpaside was isolated from a Black Cohosh (Actea racemosa L.) extract and its structure was elucidated by means of 1H, 13C NMR, IR and Raman spectroscopy supported by B3LYP/6-31G** calculations. The vibrational spectra were interpreted using the PED analysis of 273 fundamentals. Its structure comprises four condensed rings A-D which are 6, 7, 6, and 5-membered, respectively. An oxiirane ring is located in the side chain and a xylose moiety is attached to the A-ring. Comparison of the experimental 13C NMR data with the theoretical chemical shifts of 24S- and 24R-cimipodocarpaside isomers revealed that the isolated compound has the 24S-configuration. Combined spectroscopic and computational studies enabled the determination of the structure of cimipodocarpaside as (24S)-3β-hydroxy-24,25-oxiirane-16,23-dione-9,10-seco-9,19-cyclolanost-7(8),9(11),10(19)-trien-3-O-β-D-xylopyranoside. Triterpenes with 7-membered ring were thus far isolated from only Actea podocarpa DC. plants. This is the first report on the isolation of such a compound from Black Cohosh. Copyright © 2010 Elsevier B.V. All rights reserved.

Novel and unusual triterpene from Black Cohosh. Determination of structure of 9,10- seco-9,19-cyclolanostane xyloside (cimipodocarpaside) by NMR, IR and Raman spectroscopy and DFT calculations

NASA Astrophysics Data System (ADS)

Jamróz, Marta K.; Jamróz, Michał H.; Dobrowolski, Jan Cz.; Gliński, Jan A.; Davey, Matthew H.; Wawer, Iwona

2011-01-01

A new triterpene xyloside, designated cimipodocarpaside was isolated from a Black Cohosh ( Actea racemosa L.) extract and its structure was elucidated by means of 1H, 13C NMR, IR and Raman spectroscopy supported by B3LYP/6-31G** calculations. The vibrational spectra were interpreted using the PED analysis of 273 fundamentals. Its structure comprises four condensed rings A-D which are 6, 7, 6, and 5-membered, respectively. An oxiirane ring is located in the side chain and a xylose moiety is attached to the A-ring. Comparison of the experimental 13C NMR data with the theoretical chemical shifts of 24 S- and 24 R-cimipodocarpaside isomers revealed that the isolated compound has the 24 S-configuration. Combined spectroscopic and computational studies enabled the determination of the structure of cimipodocarpaside as (24 S)-3β-hydroxy-24,25-oxiirane-16,23-dione-9,10- seco-9,19-cyclolanost-7(8),9(11),10(19)-trien-3-O-β- D-xylopyranoside. Triterpenes with 7-membered ring were thus far isolated from only Actea podocarpa DC. plants. This is the first report on the isolation of such a compound from Black Cohosh.

Finger muscle attachments for an OpenSim upper-extremity model.

PubMed

Lee, Jong Hwa; Asakawa, Deanna S; Dennerlein, Jack T; Jindrich, Devin L

2015-01-01

We determined muscle attachment points for the index, middle, ring and little fingers in an OpenSim upper-extremity model. Attachment points were selected to match both experimentally measured locations and mechanical function (moment arms). Although experimental measurements of finger muscle attachments have been made, models differ from specimens in many respects such as bone segment ratio, joint kinematics and coordinate system. Likewise, moment arms are not available for all intrinsic finger muscles. Therefore, it was necessary to scale and translate muscle attachments from one experimental or model environment to another while preserving mechanical function. We used a two-step process. First, we estimated muscle function by calculating moment arms for all intrinsic and extrinsic muscles using the partial velocity method. Second, optimization using Simulated Annealing and Hooke-Jeeves algorithms found muscle-tendon paths that minimized root mean square (RMS) differences between experimental and modeled moment arms. The partial velocity method resulted in variance accounted for (VAF) between measured and calculated moment arms of 75.5% on average (range from 48.5% to 99.5%) for intrinsic and extrinsic index finger muscles where measured data were available. RMS error between experimental and optimized values was within one standard deviation (S.D) of measured moment arm (mean RMS error = 1.5 mm < measured S.D = 2.5 mm). Validation of both steps of the technique allowed for estimation of muscle attachment points for muscles whose moment arms have not been measured. Differences between modeled and experimentally measured muscle attachments, averaged over all finger joints, were less than 4.9 mm (within 7.1% of the average length of the muscle-tendon paths). The resulting non-proprietary musculoskeletal model of the human fingers could be useful for many applications, including better understanding of complex multi-touch and gestural movements.

Finger Muscle Attachments for an OpenSim Upper-Extremity Model

PubMed Central

Lee, Jong Hwa; Asakawa, Deanna S.; Dennerlein, Jack T.; Jindrich, Devin L.

2015-01-01

We determined muscle attachment points for the index, middle, ring and little fingers in an OpenSim upper-extremity model. Attachment points were selected to match both experimentally measured locations and mechanical function (moment arms). Although experimental measurements of finger muscle attachments have been made, models differ from specimens in many respects such as bone segment ratio, joint kinematics and coordinate system. Likewise, moment arms are not available for all intrinsic finger muscles. Therefore, it was necessary to scale and translate muscle attachments from one experimental or model environment to another while preserving mechanical function. We used a two-step process. First, we estimated muscle function by calculating moment arms for all intrinsic and extrinsic muscles using the partial velocity method. Second, optimization using Simulated Annealing and Hooke-Jeeves algorithms found muscle-tendon paths that minimized root mean square (RMS) differences between experimental and modeled moment arms. The partial velocity method resulted in variance accounted for (VAF) between measured and calculated moment arms of 75.5% on average (range from 48.5% to 99.5%) for intrinsic and extrinsic index finger muscles where measured data were available. RMS error between experimental and optimized values was within one standard deviation (S.D) of measured moment arm (mean RMS error = 1.5 mm < measured S.D = 2.5 mm). Validation of both steps of the technique allowed for estimation of muscle attachment points for muscles whose moment arms have not been measured. Differences between modeled and experimentally measured muscle attachments, averaged over all finger joints, were less than 4.9 mm (within 7.1% of the average length of the muscle-tendon paths). The resulting non-proprietary musculoskeletal model of the human fingers could be useful for many applications, including better understanding of complex multi-touch and gestural movements. PMID:25853869

Effect of placental tissue on inhibition of uterine contraction by nitric oxide donors.

PubMed

Syal, A; Okawa, T; Vedernikov, Y; Chwalisz, K; Saade, G R; Garfield, R E

1999-08-01

Our purpose was to test the hypothesis that placental tissue modulates the effect of nitric oxide on spontaneous uterine contractility in pregnant rats. Rings (approximately 4 mm) of uterus taken from rats on day 14 (midpregnancy, n = 6), day 18 (late pregnancy, n = 4), and day 22 (term, n = 4) of gestation were placed in organ chambers filled with Krebs-bicarbonate buffer bubbled with 5% carbon dioxide in air (37 degrees C, pH approximately 7.4) for isometric tension recording. In some rings a piece of placenta was left attached to the uterine wall. In the other rings the fetuses, placentas, and membranes were removed completely. Change of spontaneous contractions of the rings (percentage change of basal integral activity for 10 minutes) in response to cumulative concentrations of the nitric oxide donors diethylamine-nitric oxide and nitroglycerin (10(-6) mol/L to 10(-4) mol/L) were compared between rings with and without placenta. Diethylamine-nitric oxide and nitroglycerin inhibited spontaneous uterine contractions in rings from midpregnancy, in both the absence and the presence of placenta. In rings from midpregnancy, the maximal inhibition of contractions by diethylamine-nitric oxide but not by nitroglycerin was significantly (P <.05) higher in the presence (26.7% +/- 3.5% of basal activity) than in the absence (39. 6% +/- 3.3%) of placenta. Inhibition of contraction by nitric oxide donors in rings from late and term pregnancy was less than in midpregnancy, and the presence of placental tissue did not influence the responses. The presence of placental tissue enhances inhibition of uterine contractility by agents that spontaneously release nitric oxide, such as diethylamine-nitric oxide, but not by nitroglycerin, which requires metabolic transformation for nitric oxide to be released. Refractoriness to nitric oxide near or at term does not depend on the presence or absence of placental tissue.

Letter to the Editor [response to "Towards a new model of branch attachment" by D. Slater and C. Harbinson

Treesearch

Kevin T. Smith

2012-01-01

The recent article "Towards a new model of branch attachment" by D. Slater and C. Harbinson (Arboricultural Journal (2010), 33, pp. 95-105) criticises strongly the model of branch attachment described by Dr Alex Shigo in 1985. As I recall, my first glimpse of Shigo's model was literally drawn on the back of an airline cocktail napkin. He rushed into the...

Maternal Narratives Contribute to Foundations of the Child's Inner World. Commentary on: "Maternal Adult Attachment Interview (AAI) Collected During Pregnancy Predicts Reflective Functioning in AAIs from their First-Born Children 17 Years Later"

ERIC Educational Resources Information Center

Soares, Isabel; Baptista, Joana

2016-01-01

In this commentary, Soares and Baptista state that the Steele, Perez, Segal, and Steele (2016) article contributed with an informative study that adolescents' reflective functioning (RF) is predicted by maternal attachment representation, which was assessed even before the youth were born by using the Adult Attachment Interview. The authors assert…

Detached-Eddy Simulations of Attached and Detached Boundary Layers

NASA Astrophysics Data System (ADS)

Caruelle, B.; Ducros, F.

2003-12-01

This article presents Detached-Eddy Simulations (DESs) of attached and detached turbulent boundary layers. This hybrid Reynolds Averaged Navier-Stokes (RANS) / Large Eddy Simulation (LES) model goes continuously from RANS to LES according to the mesh definition. We propose a parametric study of the model over two "academic" configurations, in order to get information on the influence of the mesh to correctly treat complex flow with attached and detached boundary layers.

The phase state of NiTi implant material affects osteoclastic attachment.

PubMed

Muhonen, V; Heikkinen, R; Danilov, A; Jämsä, T; Ilvesaro, J; Tuukkanen, J

2005-12-01

In the present work, the responses of mature osteoclasts cultured on austenite and martensite phases of NiTi shape memory implant material were studied. We used the sensitivity of osteoclasts to the underlying substrate and actin ring formation as an indicator of the adequacy of the implant surface. The results showed osteoclasts with actin ring on both NiTi phases. However, significantly more osteoclasts were present on the austenitic NiTi than on the martensitic NiTi. We also analyzed the surface free energy of the samples but found no significant difference between austenite and martensite phases. The results revealed that osteoclasts tolerated well the austenite phase of NiTi. The chemically identical martensitic NiTi was not as well tolerated by osteoclasts (e.g., indicated by diminished actin ring formation). This leads to the conclusion that certain physical properties specific to the martensitic NiTi have an adverse effect to the surviving of osteoclasts on this NiTi phase. These results confirm that mature, authentic osteoclasts can act as cell probes in experiments concerning aspects of biocompatibility of bone implant materials. (c) 2005 Wiley Periodicals, Inc.

Tuned mass damper for integrally bladed turbine rotor

NASA Technical Reports Server (NTRS)

Marra, John J. (Inventor)

1994-01-01

The invention is directed to a damper ring for damping the natural vibration of the rotor blades of an integrally bladed rocket turbine rotor. The invention consists of an integral damper ring which is fixed to the underside of the rotor blade platform of a turbine rotor. The damper ring includes integral supports which extend radially outwardly therefrom. The supports are located adjacent to the base portion and directly under each blade of the rotor. Vibration damping is accomplished by action of tuned mass damper beams attached at each end to the supports. These beams vibrate at a predetermined frequency during operation. The vibration of the beams enforce a local node of zero vibratory amplitude at the interface between the supports and the beam. The vibration of the beams create forces upon the supports which forces are transmitted through the rotor blade mounting platform to the base of each rotor blade. When these forces attain a predetermined design frequency and magnitude and are directed to the base of the rotor blades, vibration of the rotor blades is effectively counteracted.

Ring-breaking electron attachment to uracil: following bond dissociations via evolving resonances.

PubMed

Gianturco, Franco A; Sebastianelli, F; Lucchese, R R; Baccarelli, I; Sanna, N

2008-05-07

Calculations are carried out at various distinct energies to obtain both elastic cross sections and S-matrix resonance indicators (poles) from a quantum treatment of the electron scattering from gas-phase uracil. The low-energy region confirms the presence of pi(*) resonances as revealed by earlier calculations and experiments which are compared with the present findings. They turn out to be little affected by bond deformation, while the transient negative ions (TNIs) associated with sigma(*) resonances in the higher energy region ( approximately 8 eV) indeed show that ring deformations which allow vibrational redistribution of the excess electron energy into the molecular target strongly affect these shape resonances: They therefore evolve along different dissociative pathways and stabilize different fragment anions. The calculations further show that the occurrence of conical intersections between sigma(*) and pi(*)-type potential energy surfaces (real parts) is a very likely mechanism responsible for energy transfers between different TNIs. The excess electron wavefunctions for such scattering states, once mapped over the molecular space, provide nanoscopic reasons for the selective breaking of different bonds in the ring region.

A detailed study of the magnetism of chiral {Cr₇M} rings: an investigation into parametrization and transferability of parameters.

PubMed

Garlatti, Elena; Albring, Morten A; Baker, Michael L; Docherty, Rebecca J; Mutka, Hannu; Guidi, Tatiana; Garcia Sakai, Victoria; Whitehead, George F S; Pritchard, Robin G; Timco, Grigore A; Tuna, Floriana; Amoretti, Giuseppe; Carretta, Stefano; Santini, Paolo; Lorusso, Giulia; Affronte, Marco; McInnes, Eric J L; Collison, David; Winpenny, Richard E P

2014-07-09

Compounds of general formula [Cr7MF3(Etglu)(O2C(t)Bu)15(Phpy)] [H5Etglu = N-ethyl-d-glucamine; Phpy = 4-phenylpyridine; M = Zn (1), Mn (2), Ni (3)] have been prepared. The structures contain an irregular octagon of metal sites formed around the penta-deprotonated Etglu(5-) ligand; the chirality of N-ethyl-d-glucamine is retained in the final product. The seven Cr(III) sites have a range of coordination environments, and the divalent metal site is crystallographically identified and has a Phpy ligand attached to it. By using complementary experimental techniques, including magnetization and specific heat measurements, inelastic neutron scattering, and electron paramagnetic resonance spectroscopy, we have investigated the magnetic features of this family of {Cr7M} rings. Microscopic parameters of the spin Hamiltonian have been determined as a result of best fits of the different experimental data, allowing a direct comparison with corresponding parameters found in the parent compounds. We examine whether these parameters can be transferred between compounds and compare them with those of an earlier family of heterometallic rings.

An in Vitro Twist Fatigue Test of Fabric Stent-Grafts Supported by Z-Stents vs. Ringed Stents.

PubMed

Lin, Jing; Guidoin, Robert; Du, Jia; Wang, Lu; Douglas, Graeham; Zhu, Danjie; Nutley, Mark; Perron, Lygia; Zhang, Ze; Douville, Yvan

2016-02-16

Whereas buckling can cause type III endoleaks, long-term twisting of a stent-graft was investigated here as a mechanism leading to type V endoleak or endotension. Two experimental device designs supported with Z-stents having strut angles of 35° or 45° were compared to a ringed control under accelerated twisting. Damage to each device was assessed and compared after different durations of twisting, with focus on damage that may allow leakage. Stent-grafts with 35° Z-stents had the most severe distortion and damage to the graft fabric. The 45° Z-stents caused less fabric damage. However, consistent stretching was still seen around the holes for sutures, which attach the stents to the graft fabric. Larger holes may become channels for fluid percolation through the wall. The ringed stent-graft had the least damage observed. Stent apexes with sharp angles appear to be responsible for major damage to the fabrics. Device manufacturers should consider stent apex angle when designing stent-grafts, and ensure their devices are resistant to twisting.

An in Vitro Twist Fatigue Test of Fabric Stent-Grafts Supported by Z-Stents vs. Ringed Stents

PubMed Central

Lin, Jing; Guidoin, Robert; Du, Jia; Wang, Lu; Douglas, Graeham; Zhu, Danjie; Nutley, Mark; Perron, Lygia; Zhang, Ze; Douville, Yvan

2016-01-01

Whereas buckling can cause type III endoleaks, long-term twisting of a stent-graft was investigated here as a mechanism leading to type V endoleak or endotension. Two experimental device designs supported with Z-stents having strut angles of 35° or 45° were compared to a ringed control under accelerated twisting. Damage to each device was assessed and compared after different durations of twisting, with focus on damage that may allow leakage. Stent-grafts with 35° Z-stents had the most severe distortion and damage to the graft fabric. The 45° Z-stents caused less fabric damage. However, consistent stretching was still seen around the holes for sutures, which attach the stents to the graft fabric. Larger holes may become channels for fluid percolation through the wall. The ringed stent-graft had the least damage observed. Stent apexes with sharp angles appear to be responsible for major damage to the fabrics. Device manufacturers should consider stent apex angle when designing stent-grafts, and ensure their devices are resistant to twisting. PMID:28787913

Combined passive bearing element/generator motor

DOEpatents

Post, Richard F.

2000-01-01

An electric machine includes a cylindrical rotor made up of an array of permanent magnets that provide a N-pole magnetic field of even order (where N=4, 6, 8, etc.). This array of permanent magnets has bars of identical permanent magnets made of dipole elements where the bars are assembled in a circle. A stator inserted down the axis of the dipole field is made of two sets of windings that are electrically orthogonal to each other, where one set of windings provides stabilization of the stator and the other set of windings couples to the array of permanent magnets and acts as the windings of a generator/motor. The rotor and the stator are horizontally disposed, and the rotor is on the outside of said stator. The electric machine may also include two rings of ferromagnetic material. One of these rings would be located at each end of the rotor. Two levitator pole assemblies are attached to a support member that is external to the electric machine. These levitator pole assemblies interact attractively with the rings of ferromagnetic material to produce a levitating force upon the rotor.

Quick torque coupling

DOEpatents

Luft, Peter A [El Cerrito, CA

2009-05-12

A coupling for mechanically connecting modular tubular struts of a positioning apparatus or space frame, comprising a pair of toothed rings (10, 12) attached to separate strut members (16), the teeth (18, 20) of the primary rings (10, 12) mechanically interlocking in both an axial and circumferential manner, and a third part comprising a sliding, toothed collar (14) the teeth (22) of which interlock the teeth (18, 20) of the primary rings (10, 12), preventing them from disengaging, and completely locking the assembly together. A secondary mechanism provides a nesting force for the collar, and/or retains it. The coupling is self-contained and requires no external tools for installation, and can be assembled with gloved hands in demanding environments. No gauging or measured torque is required for assembly. The assembly can easily be visually inspected to determine a "go" or "no-go" status. The coupling is compact and relatively light-weight. Because of it's triply interlocking teeth, the connection is rigid. The connection does not primarily rely on clamps, springs or friction based fasteners, and is therefore reliable in fail-safe applications.

Alkali metal cation complexation by 1,3-alternate, mono-ionisable calix[4]arene-benzocrown-6 compounds

DOE PAGES

Surowiec, Malgorzata A.; Custelcean, Radu; Surowiec, Kazimierz; ...

2014-04-23

Alkali metal cation extraction behavior for two series of 1,3-alternate, mono-ionizable calix[4]arene-benzocrown-6 compounds is examined. In Series 1, the proton-ionizable group is a substituent on the benzo group of the polyether ring that directs it away from the crown ether cavity. In Series 2, the proton-ionizable group is attached to one para position in the calixarene framework, thus positioning it over the crown ether ring. Competitive solvent extraction of alkali metal cations from aqueous solutions into chloroform shows high Cs+ efficiency and selectivity. Single-species extraction pH profiles of Cs+ for Series 1 and 2 ligands with the same proton-ionizable groupmore » are very similar. Thus, association of Cs+ with the calixcrown ring is more important than the the proton-ionizable group’s position in relation to the crown ether cavity. Solid-state structures are presented for two unionized ligands from Series 2, as is a crystal containing two different ionized ligand–Cs+ complexes.« less

Parents' self-reported attachment styles: a review of links with parenting behaviors, emotions, and cognitions.

PubMed

Jones, Jason D; Cassidy, Jude; Shaver, Phillip R

2015-02-01

For decades, attachment scholars have been investigating how parents' adult attachment orientations relate to the ways in which they parent. Traditionally, this research has been conducted by developmental and clinical psychologists who typically employ the Adult Attachment Interview (AAI) to measure adult attachment. However, dating back to the mid-1990s, social and personality psychologists have been investigating how self-reported adult attachment styles relate to various facets of parenting. The literature on self-reported attachment and parenting has received less attention than AAI research on the same topic and, to date, there is no comprehensive review of this literature. In this article, we review more than 60 studies of the links between self-reported attachment styles and parenting, integrate the findings to reach general conclusions, discuss unresolved questions, and suggest future directions. Finally, we discuss the potential benefits to the study of parenting of collaborations among researchers from the developmental and social attachment research traditions. © 2014 by the Society for Personality and Social Psychology, Inc.

Parents’ Self-Reported Attachment Styles: A Review of Links with Parenting Behaviors, Emotions, and Cognitions

PubMed Central

Jones, Jason D.; Cassidy, Jude; Shaver, Phillip. R.

2014-01-01

For decades, attachment scholars have been investigating how parents’ adult attachment orientations relate to the ways in which they parent. Traditionally, this research has been conducted by developmental and clinical psychologists who typically employ the Adult Attachment Interview (AAI) to measure adult attachment. However, dating back to the mid-1990s, social and personality psychologists have been investigating how self-reported adult attachment styles relate to various facets of parenting. The literature on self-reported attachment and parenting has received less attention than AAI research on the same topic and, to date, there is no comprehensive review of this literature. In this article, we review over 60 studies of the links between self-reported attachment styles and parenting, integrate the findings to reach general conclusions, discuss unresolved questions, and suggest future directions. Finally, we discuss the potential benefits to the study of parenting of collaborations among researchers from the developmental and social attachment research traditions. PMID:25024278

Using attachment theory in medical settings: implications for primary care physicians.

PubMed

Hooper, Lisa M; Tomek, Sara; Newman, Caroline R

2012-02-01

Mental health researchers, clinicians and clinical psychologists have long considered a good provider-patient relationship to be an important factor for positive treatment outcomes in a range of therapeutic settings. However, primary care physicians have been slow to consider how attachment theory may be used in the context of patient care in medical settings. In the current article, John Bowlby's attachment theory and proposed attachment styles are proffered as a framework to better understand patient behaviors, patient communication styles with physicians and the physician-patient relationship in medical settings. The authors recommend how primary care physicians and other health care providers can translate attachment theory to enhance practice behaviors and health-related communications in medical settings.

In situ observation of D-rich carbonaceous globules embedded in NWA 801 CR2 chondrite

NASA Astrophysics Data System (ADS)

Hashiguchi, Minako; Kobayashi, Sachio; Yurimoto, Hisayoshi

2013-12-01

Eighty-five D-rich carbonaceous particles were identified in the matrix of the NWA 801 CR2 chondrite using isotope microscopy. The occurrence of 67 D-rich carbonaceous particles was characterized using secondary electron microscopy combined with X-ray elemental mapping. The close association of H and C, and D-enrichment suggests that the D-rich carbonaceous particles correspond to organic matter. The D-rich organic particles were scattered ubiquitously throughout the matrix at a concentration of approximately 660 ppm. The morphology of the D-rich carbonaceous particles is globular up to about 1 μm in diameter and is classified into four types: ring globules, round globules, irregular-shaped globules, and globule aggregates. The ring globules are ring-shaped organic matter containing silicate and/or oxide, with or without a void in the center. This is the first report of silicate and oxide grains surrounded by D-rich organic matter. The globule aggregates are composed of several D-rich organic globules mixed with silicates. Morphology of ring globules is very similar to core-mantle grain produced in the molecular cloud or in the outer solar nebula inferring by astronomy, suggesting that the organic globules have formed by UV photolysis in the ice mantle. Silicates or oxides attached to D-rich organic globules are the first observation among chondrites so far and may be unique nature of CR2 chondrites. The hydrogen isotopic compositions of the ring globules, round globules, irregular-shaped globules, and globule aggregates are δD = 3000-4800, 2900-8100, 2700-11,000, and 2500-11,000‰, respectively. Variations of D/H ratio of these organic globules seemed to be attributed to variations of D/H ratio of the organic radicals or differences of content of the D-rich organic radicals. There are no significant differences in the hydrogen isotopic compositions among the four types of D-rich carbonaceous matter. The D-enrichments suggest that these organic globules have formed in a cold molecular cloud and/or the outer protoplanetary disk of the early solar system. The oxygen isotopic compositions of the silicates and oxides attached to the ring globules and globule aggregates range from δ17O = -49 to 50‰ and δ18O = -46 to 64‰. The oxygen isotopic compositions are not distinct from those of solar system materials, which suggests that the organic globules were formed in the outer solar system rather than in the presolar environment. Therefore, it is possible that the ring globules and globule aggregates in NWA 801 may have formed in the outer protoplanetary disk of the early solar system. Organic globules that exhibit clear presolar origin were not identified in this study. The lack of clear presolar signatures might suggest that modifications of isotopic compositions or morphologies of the presolar organic matter occurred in the early solar nebula.

Helping military children cope with parental deployment: role of attachment theory and recommendations for mental health clinicians and counselors.

PubMed

Miller, Laurence; Miller, Halle B; Bjorklund, David

2010-01-01

Military deployment of a parent carries with it a number of stresses for children, all centering around uncertainty, instability and unpredictability. This article conceptualizes military deployment and relocation stress in the context of attachment theory, and describes the types of adverse outcomes that can occur as the result of impaired attachment. It then presents a set of practical recommendations for mental health clinicians and counselors for helping children and families cope productively and negotiate the developmental hurdles associated with maintaining healthy attachment and family stability in the face of military deployment.

Buckling test of a 3-meter-diameter corrugated graphite-epoxy ring-stiffened cylinder

NASA Technical Reports Server (NTRS)

Davis, R. C.

1982-01-01

A three m diameter by three m long corrugated cylindrical shell with external stiffening rings was tested to failure by buckling. The corrugation geometry for the graphite epoxy composite cylinder wall was optimized to withstand a compressive load producing an ultimate load intensity of 157.6 kN/m without buckling. The test method used to produce the design load intensity was to mount the specimen as a cantilevered cylinder and apply a pure bending moment to the end. A load introduction problem with the specimen was solved by using the BOSOR 4 shell of revolution computer code to analyze the shell and attached loading fixtures. The cylinder test loading achieved was 101 percent of design ultimate, and the resulting mass per unit of shell wall area was 1.96 kg/sq m.

KSC-2011-6340

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., NASA's Gravity Recovery and Interior Laboratory-B (GRAIL-B) lunar probe is secured on the spacecraft adapter ring. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

KSC-2011-6351

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., Lockheed Martin technicians verify that NASA's Gravity Recovery and Interior Laboratory-A (GRAIL-A) lunar probe is positioned correctly on the spacecraft adapter ring. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

KSC-2011-6333

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., NASA's Gravity Recovery and Interior Laboratory-B (GRAIL-B) lunar probe is lowered toward the spacecraft adapter ring. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

β-Cyclodextrin's orientation onto TiO2 and its paradoxical role in guest's photodegradation.

PubMed

Zhang, Xu; Yang, Zixin; Li, Xuankun; Deng, Nansheng; Qian, Shahua

2013-01-28

This work revealed that β-cyclodextrin was attached onto the surface of TiO(2) predominately by its secondary ring side, which caused paradoxical functions of β-cyclodextrin in the photodegradation of the four bisphenols. The equilibrium between the guest adsorbed through β-cyclodextrin onto TiO(2) and the one locked in β-CD in water could also change the role of β-cyclodextrin in the degradation of a certain guest.

EXHIBIT - SPACESUITS

NASA Image and Video Library

1982-02-08

S82-26645 (March 1982) --- Spacesuit inner gloves consist of pressure bladders covered by Beta Cloth. EVA outer gloves are made of Beta Cloth, Mylar and a metallic mesh hand area. The thumb and fingertips of the glove are molded of silicone rubber to permit a degree of sensitivity. The inner gloves attach to the suit by pressure sealing rings, similar to these used in helmet-to-suit connections. The outer gloves served as a cover to protect from micrometeorites, abrasions and heat.

Macrocyclic bifunctional chelating agents

DOEpatents

Meares, Claude F.; DeNardo, Sally J.; Cole, William C.; Mol, Min K.

1987-01-01

A copper chelate conjugate which is stable in human serum. The conjugate includes the copper chelate of a cyclic tetraaza di-, tri-, or tetra-acetic acid, a linker attached at one linker end to a ring carbon of the chelate, and a biomolecule joined at the other end of the linker. The conjugate, or the linker-copper chelate compound used in forming the conjugate, are designed for use in diagnostic and therapeutic applications which involve Cu(II) localization via the systemic route.

Unmanned Evaluation of Mares Abyss 22 Navy Open Circuit Scuba Regulator for Cold Water Diving

DTIC Science & Technology

2011-05-05

regulator is shown above the water. Note the blue mouthpiece adaptor, white oral static pressure pick-up ring , and gray routing block attached for...e.g., an inflation whip or a second-stage octopus ), submersible pressure gage, or gas-integrated computer were connected to the first stage. As...adaptor (shown in blue ) inward into the second-stage assembly, Figure 9 indicates typical 9 internal second-stage icing experienced during Phase

Laser Induced Polymerization Reactions in Solid Propellant Binders.

DTIC Science & Technology

1982-06-18

were -then evacuated in a glass vacuum desiccatbr to remove dissolved air and then opened to the atmosphere. Some samples were run under a nitrogen or...diacetate solution was prepared using acetonitrile as solvent. Molar absorbtivities at 266 and 355 nm for l,l’-ferrocenedicarboxylic acid were obtained with...increasing order of the electron withdrawing ability of the groups attached to the ferrocene ring. The order is as shown. r l,l’-Ferrocenedicarboxylic Acid

Evaluation of Six Options for Obtaining Red Water

DTIC Science & Technology

1993-08-01

soluble species and extraction.I The first step, nitration, is accomplished in three successive stages whereby a nitro I (-NO2) group is attached at the 2...4, and 6 positions of the benzene ring of toluene2. Substitution of the nitro group for hydrogen results in water formation requiring higher...isomers, ortho -, meta-, and para-, are formed; but the ortho - is predominant. The ortho - and para- isomers nitrate further to o -TNT in later stages

Smart tunnel: Docking mechanism

NASA Technical Reports Server (NTRS)

Schliesing, John A. (Inventor); Edenborough, Kevin L. (Inventor)

1989-01-01

A docking mechanism is presented for the docking of a space vehicle to a space station comprising a flexible tunnel frame structure which is deployable from the space station. The tunnel structure comprises a plurality of series connected frame sections, one end section of which is attached to the space station and the other end attached to a docking module of a configuration adapted for docking in the payload bay of the space vehicle. The docking module is provided with trunnions, adapted for latching engagement with latches installed in the vehicle payload bay and with hatch means connectable to a hatch of the crew cabin of the space vehicle. Each frame section comprises a pair of spaced ring members, interconnected by actuator-attenuator devices which are individually controllable by an automatic control means to impart relative movement of one ring member to the other in six degrees of freedom of motion. The control means includes computer logic responsive to sensor signals of range and attitude information, capture latch condition, structural loads, and actuator stroke for generating commands to the onboard flight control system and the individual actuator-attenuators to deploy the tunnel to effect a coupling with the space vehicle and space station after coupling. A tubular fluid-impervious liner, preferably fabric, is disposed through the frame sections of a size sufficient to accommodate the passage of personnel and cargo.

The Pedagogical Examples of Groups and Rings That Algebraists Think Are Most Important in an Introductory Course

ERIC Educational Resources Information Center

Cook, John Paul; Fukawa-Connelly, Tim

2015-01-01

This article reports on an exploratory study designed to investigate the reasoning behind algebraists' selection of examples. Variation theory provided a lens to analyze their collections of examples. Our findings include the classes of examples of groups and rings that algebraists believe to be most pedagogically useful. Chief among their…

Attachment classification, psychophysiology and frontal EEG asymmetry across the lifespan: a review

PubMed Central

Gander, Manuela; Buchheim, Anna

2015-01-01

In recent years research on physiological response and frontal electroencephalographic (EEG) asymmetry in different patterns of infant and adult attachment has increased. We review research findings regarding associations between attachment classifications and frontal EEG asymmetry, the autonomic nervous system (ANS) and the hypothalamic-pituitary-adrenocortical axis (HPA). Studies indicate that insecure attachment is related to a heightened adrenocortical activity, heart rate and skin conductance in response to stress, which is consistent with the hypothesis that attachment insecurity leads to impaired emotion regulation. Research on frontal EEG asymmetry also shows a clear difference in the emotional arousal between the attachment groups evidenced by specific frontal asymmetry changes. Furthermore, we discuss neurophysiological evidence of attachment organization and present up-to-date findings of EEG-research with adults. Based on the overall patterns of results presented in this article we identify some major areas of interest and directions for future research. PMID:25745393

Evidence-Based Parenting Interventions to Promote Secure Attachment

PubMed Central

Wright, Barry; Edginton, Elizabeth

2016-01-01

Various interventions are used in clinical practice to address insecure or disorganized attachment patterns and attachment disorders. The most common of these are parenting interventions, but not all have a robust empirical evidence base. We undertook a systematic review of randomized trials comparing a parenting intervention with a control, where these used a validated attachment instrument, in order to evaluate the clinical and cost-effectiveness of interventions aiming to improve attachment in children with severe attachment problems (mean age <13 years). This article aims to inform clinicians about the parenting interventions included in our systematic review that were clinically effective in promoting secure attachment. For completeness, we also briefly discuss other interventions without randomized controlled trial evidence, identified in Patient Public Involvement workshops and expert groups at the point our review was completed as being used or recommended. We outline the key implications of our findings for clinical practice and future research. PMID:27583298

Phobias of attachment-related inner states in the psychotherapy of adult survivors of childhood complex trauma.

PubMed

Liotti, Giovanni

2013-11-01

The clinical case described in this article illustrates the value of taking into account the dynamics of disorganized attachment in the assessment of attachment-related phobias (phobia of attachment and phobia of attachment loss) during the psychotherapy of chronically traumatized patients. These seemingly opposite phobias typically coexist in the same patient, appear as phobias of both inner states (affect phobias) and relational experiences, and are linked to dissociated representations of self-with-other. Theory and research on attachment disorganization provide a clinician-friendly conceptual framework for capturing both the intrapsychic (e.g., intrusive and nonintegrated mental states) and the relational (e.g., dramatic unsolvable dilemmas in interpersonal exchanges) aspects of the attachment-related phobias. The therapeutic strategy and the key interventions that logically follow from a case formulation based on this conceptual framework are examined. © 2013 Wiley Periodicals, Inc.

Commentary--Attachment in Middle Childhood: Looking Back, Forward, and Within

ERIC Educational Resources Information Center

Steele, Howard

2015-01-01

This commentary discusses the articles that comprise this special issue on attachment in middle childhood. Central to this discussion is the distinction between verbal, strategic, and conscious responses to questionnaires as compared to verbal and nonverbal, automatic and largely unconscious responses to interviews. Both methods have been…

Gone but Not Forgotten: Children's Experiences with Attachment, Separation, and Loss

ERIC Educational Resources Information Center

Branch, Mary Louise; Brinson, Sabrina A.

2007-01-01

Attachment, separation, and loss are critical life events for many young children. This article discusses prevalent factors of separation and loss and their potential harmful effects on development. Also, books and resources geared for children are suggested to help early childhood professionals facilitate resolution with affected children and…

Trauma and Psychotherapy: Implications from a Behavior Analysis Perspective

ERIC Educational Resources Information Center

Prather, Walter

2007-01-01

Attachment theory provides a useful conceptual framework for understanding trauma and the treatment of abuse in children. This article examines attachment theory and traditional models of family therapy from the perspective of behavior analysis, and provides a rationale for a behavioral treatment approach for abused children and their foster or…

Robotic Manufacturing of 5.5 Meter Cryogenic Fuel Tank Dome Assemblies for the NASA Ares I Rocket

NASA Technical Reports Server (NTRS)

Jones, Ronald E.

2012-01-01

The Ares I rocket is the first launch vehicle scheduled for manufacture under the National Aeronautic and Space Administration's (NASA's) Constellation program. A series of full-scale Ares I development articles have been constructed on the Robotic Weld Tool at the NASA George C. Marshall Space Flight Center in Huntsville, Alabama. The Robotic Weld Tool is a 100 ton, 7-axis, robotic manufacturing system capable of machining and friction stir welding large-scale space hardware. This presentation will focus on the friction stir welding of 5.5m diameter cryogenic fuel tank components; specifically, the liquid hydrogen forward dome (LH2 MDA), the common bulkhead manufacturing development articles (CBMDA) and the thermal protection system demonstration dome (TPS Dome). The LH2 MDA was the first full-scale, flight-like Ares I hardware produced under the Constellation Program. It is a 5.5m diameter elliptical dome assembly consisting of eight gore panels, a y-ring stiffener and a manhole fitting. All components are made from aluminumlithium alloy 2195. Conventional and self-reacting friction stir welding was used on this article. An overview of the manufacturing processes will be discussed. The LH2 MDA is the first known fully friction stir welded dome ever produced. The completion of four Common Bulkhead Manufacturing Development Articles (CBMDA) and the TPS Dome will also be highlighted. Each CBMDA and the TPS Dome consists of a 5.5m diameter spun-formed dome friction stir welded to a y-ring stiffener. The domes and y-rings are made of aluminum 2014 and 2219 respectively. The TPS Dome has an additional aluminum alloy 2195 barrel section welded to the y-ring. Manufacturing solutions will be discussed including "fixtureless" welding with self reacting friction stir welding.

Invited review article: Large ring lasers for rotation sensing.

PubMed

Schreiber, Karl Ulrich; Wells, Jon-Paul R

2013-04-01

Over the last two decades a series of large ring laser gyroscopes have been built having an unparalleled scale factor. These upscaled devices have improved the sensitivity and stability for rotation rate measurements by six orders of magnitude when compared to previous commercial developments. This progress has made possible entirely new applications of ring laser gyroscopes in the fields of geophysics, geodesy, and seismology. Ring lasers are currently the only viable measurement technology, which is directly referenced to the instantaneous rotation axis of the Earth. The sensor technology is rapidly developing. This is evidenced by the first experimentally viable proposals to make terrestrial tests of general relativistic effects such as the frame dragging of the rotating Earth.

Total Synthesis of Bryostatins. Development of Methodology for Atom-Economic and Stereoselective Synthesis of the C-ring Subunit

PubMed Central

Trost, Barry M.; Frontier, Alison J.; Thiel, Oliver R.; Yang, Hanbiao; Dong, Guangbin

2012-01-01

Bryostatins, a family of structurally complicated macrolides, exhibit an exceptional range of biological activities. The limited availability and structural complexity of these molecules makes development of an efficient total synthesis particularly important. This article describes our initial efforts towards the total synthesis of bryostatins, in which chemoselective and atom-economical methods for stereoselective assembly of the C-ring subunit were developed. A Pd-catalyzed tandem alkyne-alkyne coupling/6-endo-dig cyclization sequence was explored and successfully pursued in the synthesis of a dihydropyran ring system. Elaboration of this methodology ultimately led to a concise synthesis of the C-ring subunit of bryostatins. PMID:21793057

General view from inside the payload bay or the Orbiter ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view from inside the payload bay or the Orbiter Discovery approximately along its centerline looking forward toward the bulkhead of the forward fuselage. Note the panels and insulation removed for access to the orbiter's subsystems for inspection and post-mission processing. Also note the airlock and the beam-truss attach structure supporting it and attaching it to the payload bay sill longerons. In this view the docking ring and airlock hatches have been removed. This photo was taken during the processing of the Orbiter Discovery after its final mission and in preparation for its transition to the National Air and Space Museum. This view was taken in the Orbiter Processing Facility at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Cell attachment properties of Portland cement-based endodontic materials: biological and methodological considerations.

PubMed

Ahmed, Hany Mohamed Aly; Luddin, Norhayati; Kannan, Thirumulu Ponnuraj; Mokhtar, Khairani Idah; Ahmad, Azlina

2014-10-01

The attachment and spreading of mammalian cells on endodontic biomaterials are an area of active research. The purpose of this review is to discuss the cell attachment properties of Portland cement (PC)-based materials by using scanning electron microscope (SEM). In addition, methodological aspects and technical challenges are discussed. A PubMed electronic search was conducted by using appropriate key words to identify the available investigations on the cell attachment properties of PC-based endodontic materials. After retrieving the full text of related articles, the cross citations were also identified. A total of 23 articles published between January 1993 and October 2013 were identified. This review summarizes the cell attachment properties of commercial and experimental PC-based materials on different cell cultures by using SEM. Methodological procedures, technical challenges, and relevance of SEM in determining the biological profile of PC-based materials are discussed. SEM observations demonstrate that commercial MTA formulations show favorable cell attachment properties, which is consistent with their successful clinical outcomes. The favorable cell attachment properties of PC and its modified formulations support its potential use as a substitute for mineral trioxide aggregate. However, researchers should carefully select cell types for their SEM investigations that would be in contact with the proposed PC-based combinations in the clinical situation. Despite being a technical challenge, SEM provides useful information on the cell attachment properties of PC-based materials; however, other assays for cell proliferation and viability are essential to come up with an accurate in vitro biological profile of any given PC-based formulation. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

[Using attachment measures in the context of providing expert witness through psychiatric assessment in family court proceedings].

PubMed

Besier, Tanja; Ziegenhain, Ute; Fegert, Jörg M; Künster, Anne Katrin

2012-01-01

Prognostic evaluation of child development in the context of his/her actual family situation plays an important role in family law disputes. However, there is a lack of empirically validated instruments to assess socio-emotional development in very young children. Attachment research provides instruments which could be utilized in clinical practice. At this, the focus should be on assessing the quality of parent-child-relationship and the occurrence of risky parenting behaviour. The article illustrates the use of attachment measures in the context of a family court proceeding according to subsection 1666 German Civil Code. Risk assessment is carried out through direct observation of the quality of interaction between mother and ten months old infant as well as through evaluation of the attachment representations of both parent caregivers. Instruments used are the Strange Situation Test (to assess infant attachment), the CARE-Index (to assess parental sensitivity), the Adult Attachment Interview, and the Adult Attachment Projective (to assess parental attachment representations).

CLEARING MAGNET DESIGN FOR APS-U

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abliz, M.; Grimmer, J.; Jaski, Y.

2017-06-25

The Advanced Photon Source is in the process of developing an upgrade (APS-U) of the storage ring. The upgrade will be converting the current double bend achromat (DBA) lattice to a multi-bend achromat (MBA) lattice. In addition, the storage ring will be operated at 6 GeV and 200 mA with regular swap-out injection to keep the stored beam current constant [1]. The swap-out injection will take place with beamline shutters open. For radiation safety to ensure that no electrons can exit the storage ring, a passive method of protecting the beamline and containing the electrons inside the storage ring ismore » proposed. A clearing magnet will be located in all beamline front ends inside the storage ring tunnel. This article will discuss the features and design of the clearing magnet scheme for APS-U.« less

Temporary Thermocouple Attachment for Thermal/Vacuum Testing at Non-Extreme Temperatures

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Wright, Sarah E.

2016-01-01

Post-test examination and data analysis that followed a two week long vacuum test showed that numerous self-stick thermocouples became detached from the test article. The thermocouples were reattached with thermally conductive epoxy and the test was repeated to obtain the required data. Because the thermocouple detachment resulted in significant expense and rework, it was decided to investigate the temporary attachment methods used around NASA and to perform a test to assess their efficacy. The present work describes the original test and the analysis that showed that the thermocouples had become detached, temporary thermocouple attachment methods assessed in the retest and in the thermocouple attachment test, and makes a recommendation for attachment methods for future tests.

Perfect Lighting for Facial Photography in Aesthetic Surgery: Ring Light.

PubMed

Dölen, Utku Can; Çınar, Selçuk

2016-04-01

Photography is indispensable for plastic surgery. On-camera flashes can result in bleached out detail and colour. This is why most of the plastic surgery clinics prefer studio lighting similar to professional photographers'. In this article, we want to share a simple alternative to studio lighting that does not need extra space: Ring light. We took five different photographs of the same person with five different camera and lighting settings: Smartphone and ring light; point and shoot camera and on-camera flash; point and shoot camera and studio lighting; digital single-lens reflex (DLSR) camera and studio lighting; DSLR and ring light. Then, those photographs were assessed objectively with an online survey of five questions answered by three distinct populations: plastic surgeons (n: 28), professional portrait photographers (n: 24) and patients (n: 22) who had facial aesthetic procedures. Compared to the on-camera flash, studio lighting better showed the wrinkles of the subject. The ring light facilitated the perception of the wrinkles by providing homogenous soft light in a circular shape rather than bursting flashes. The combination of a DSLR camera and ring light gave the oldest looking subject according to 64 % of responders. The DSLR camera and the studio lighting demonstrated the youngest looking subject according to 70 % of the responders. The majority of the responders (78 %) chose the combination of DSLR camera and ring light that exhibited the wrinkles the most. We suggest using a ring light to obtain well-lit photographs without loss of detail, with any type of cameras. However, smartphones must be avoided if standard pictures are desired. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Group-multicast capable optical virtual private ring with contention avoidance

NASA Astrophysics Data System (ADS)

Peng, Yunfeng; Du, Shu; Long, Keping

2008-11-01

A ring based optical virtual private network (OVPN) employing contention sensing and avoidance is proposed to deliver multiple-to-multiple group-multicast traffic. The network architecture is presented and its operation principles as well as performance are investigated. The main contribution of this article is the presentation of an innovative group-multicast capable OVPN architecture with technologies available today.

The Particle inside a Ring: A Two-Dimensional Quantum Problem Visualized by Scanning Tunneling Microscopy

ERIC Educational Resources Information Center

Ellison, Mark D.

2008-01-01

The one-dimensional particle-in-a-box model used to introduce quantum mechanics to students suffers from a tenuous connection to a real physical system. This article presents a two-dimensional model, the particle confined within a ring, that directly corresponds to observations of surface electrons in a metal trapped inside a circular barrier.…

Contributions of attachment theory and research: a framework for future research, translation, and policy.

PubMed

Cassidy, Jude; Jones, Jason D; Shaver, Phillip R

2013-11-01

Attachment theory has been generating creative and impactful research for almost half a century. In this article we focus on the documented antecedents and consequences of individual differences in infant attachment patterns, suggesting topics for further theoretical clarification, research, clinical interventions, and policy applications. We pay particular attention to the concept of cognitive "working models" and to neural and physiological mechanisms through which early attachment experiences contribute to later functioning. We consider adult caregiving behavior that predicts infant attachment patterns, and the still-mysterious "transmission gap" between parental Adult Attachment Interview classifications and infant Strange Situation classifications. We also review connections between attachment and (a) child psychopathology; (b) neurobiology; (c) health and immune function; (d) empathy, compassion, and altruism; (e) school readiness; and (f) culture. We conclude with clinical-translational and public policy applications of attachment research that could reduce the occurrence and maintenance of insecure attachment during infancy and beyond. Our goal is to inspire researchers to continue advancing the field by finding new ways to tackle long-standing questions and by generating and testing novel hypotheses.

Peer Attachment and Youth Internalizing Problems: A Meta-Analysis

ERIC Educational Resources Information Center

Gorrese, Anna

2016-01-01

Background: Peer relationships become the central arena in which attachment processes are likely to play out during adolescence and beyond, and contribute to various aspects of psychosocial adjustment. Objective: Given the relevance of peer connections and the growing literature examining them, the purpose of this article was to review, through a…

Art as Relational Encounter: An Ostensive Communication Theory of Art Therapy

ERIC Educational Resources Information Center

Springham, Neil; Huet, Val

2018-01-01

Biopsychosocial theory is strengthening psychotherapy by focusing on interactions that engage the attachment system. Art therapy has the potential to align coherently with current theory provided it addresses the value of art in engaging with the attachment system. This article describes an interpersonal theory of art therapy based on a model of…

American Identity: Impact of Youths' Differential Experiences in Society on Their Attachment to American Ideals

ERIC Educational Resources Information Center

Spencer, Margaret Beale

2011-01-01

This article examines the problem of national and civic detachment among American youth. Using a developmental theoretical framework that integrates the ecological aspects of development with the phenomenological experiences of the developing individual, I argue that young Americans have difficulty developing an attachment to their identity as…

Understanding Insecure Attachment: A Study Using Children's Bird Nest Imagery

ERIC Educational Resources Information Center

Sheller, Sandy

2007-01-01

This article describes a phenomenological study of the artistic creations of bird nests by four school-aged children to illuminate their internal experiences of attachment. The author analyzed qualitative data from in-depth interviews pertaining to two-dimensional and three-dimensional artistic representations of a bird's nest and a family of…

19 CFR Appendix B to Part 191 - Sample Formats for Applications for Specific Manufacturing Drawback Rulings

Code of Federal Regulations, 2011 CFR

2011-04-01

.... When applicable, give equations of the chemical reactions. The attachment of a flow chart in addition... measurement of the merchandise used. This loss or gain is caused by atmospheric conditions, chemical reactions... finished article is intended. When applicable, give equations of the chemical reactions. The attachment of...

19 CFR Appendix B to Part 191 - Sample Formats for Applications for Specific Manufacturing Drawback Rulings

Code of Federal Regulations, 2014 CFR

2014-04-01

.... When applicable, give equations of the chemical reactions. The attachment of a flow chart in addition... measurement of the merchandise used. This loss or gain is caused by atmospheric conditions, chemical reactions... finished article is intended. When applicable, give equations of the chemical reactions. The attachment of...

19 CFR Appendix B to Part 191 - Sample Formats for Applications for Specific Manufacturing Drawback Rulings

Code of Federal Regulations, 2013 CFR

2013-04-01

.... When applicable, give equations of the chemical reactions. The attachment of a flow chart in addition... measurement of the merchandise used. This loss or gain is caused by atmospheric conditions, chemical reactions... finished article is intended. When applicable, give equations of the chemical reactions. The attachment of...

Circle of Security in Child Care: Putting Attachment Theory into Practice in Preschool Classrooms

ERIC Educational Resources Information Center

Cooper, Glen; Hoffman, Kent; Powell, Bert

2017-01-01

This article describes the Circle of Security-Classroom (COS-C) approach to applying attachment theory in preschool settings. Early childhood is an incubator for a wide range of development including the underpinnings of school readiness. Secure teacher-child relationships support this process. However, most preschool staff members lack guidance…

Fail-Safe Pressure Plug

NASA Technical Reports Server (NTRS)

Svejkovsky, Paul A.

1993-01-01

Protective plug resists slowly built-up pressure or automatically releases itself if pressure rises suddenly. Seals out moisture at pressures ranging from 50 micrometers of mercury to 200 pounds per square inch. Designed to seal throat of 38 Reaction Control Thrusters on Space Shuttle protecting internal components from corrosion. Plug conforms to contour of nozzle throat, where O-ring forms pressure seal. After plug inserted, cover attached by use of cover-fitting assembly. Modified versions useful in protecting engines, pumps, reaction vessels, and other industrial equipment during shipment and maintenance.

Electromyographic Analysis of the Peroneous Longus during Bicycle Ergometry across Work Load and Pedal Type.

DTIC Science & Technology

1983-01-01

adjusted for each subject to 60 cycles per minute using a metronome. Gait cycle was determined using an electrical pressure switch attached to the...dental burr. Electrodes were filled with conducting gel and held in place with double adhesive rings. An electrical pressure switch was taped to the...the pressure switch was carried on a separate wire to the recording equipment. All wires were held tightly against the subject’s leg to reduce

From Kites through Cold War: The Evolution of United States Air Force Manned Airborne ISR

DTIC Science & Technology

2016-06-06

Spies: The Story of America’s First Spy Ring (New York, NY: Bantam Books, 2006). 4 Stephen W. Sears, Gettysburg (Boston, MA: Houghton Mifflin, 2003...When the war slipped into trench-based stalemate, manned airborne ISR became the unblinking eye that prevented freedom of movement for either side...of dried bamboo attached to them. When the wind blew through the bamboo, a sound similar to moans and screeches was created. According to the story

The Biological Degradation of Spilled Jet Fuels: A Literature Review.

DTIC Science & Technology

1981-10-01

atoms attached to a ring. According to Bartha and Atlas 4 2 the following summary can be made of the relative biodegradability of hydrocarbons. 1. n...but had no efftct on the degradation rate of diesel Both substrates were util I zed s-’iltane islv. nt Limitation nce the work of Atlas and Bartha 6 0...that affects metabolic activity, degradation rILe fncreases vIth a rise in temperature. Atlas and Bartha 6 1 reported that le.rad !...Iion rate roughly

Antiandrogenic steroidal sulfonyl heterocycles. Utility of electrostatic complementarity in defining bioisosteric sulfonyl heterocycles.

PubMed

Mallamo, J P; Pilling, G M; Wetzel, J R; Kowalczyk, P J; Bell, M R; Kullnig, R K; Batzold, F H; Juniewicz, P E; Winneker, R C; Luss, H R

1992-05-15

Complementarity of electrostatic potential surface maps was utilized in defining bioisosteric steroidal androgen receptor antagonists. Semiempirical and ab initio level calculations performed on a series of methanesulfonyl heterocycles indicated the requirement for a partial negative charge at the heteroatom attached to C-3 of the steroid nucleus to attain androgen receptor affinity. Synthesis and testing of six heterocycle A-ring-fused dihydroethisterone derivatives support this hypothesis, and we have identified two new androgen receptor antagonists of this class.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsia Chih-Hao; Sadjadi, Seyedabdolreza; Zhang Yong

An unidentified infrared emission (UIE) feature at 6.0 μ m is detected in a number of astronomical sources showing the UIE bands. In contrast to the previous suggestion that this band is due to C=O vibrational modes, we suggest that the 6.0 μ m feature arises from olefinic double-bond functional groups. These groups are likely to be attached to aromatic rings, which are responsible for the major UIE bands. The possibility that the formation of these functional groups is related to the hydrogenation process is discussed.

Rh(V) -Nitrenoid as a Key Intermediate in Rh(III) -Catalyzed Heterocyclization by C-H Activation: A Computational Perspective on the Cycloaddition of Benzamide and Diazo Compounds.

PubMed

Zhou, Tao; Guo, Wei; Xia, Yuanzhi

2015-06-15

A mechanistic study of the substituent-dependent ring formations in Rh(III) -catalyzed C-H activation/cycloaddition of benzamide and diazo compounds was carried out by using DFT calculations. The results indicated that the decomposition of the diazo is facilitated upon the formation of the five-membered rhodacycle, in which the Rh(III) center is more electrophilic. The insertion of carbenoid into Rh-C(phenyl) bond occurs readily and forms a 6-membered rhodacycle, however, the following C-N bond formation is difficult both kinetically and thermodynamically by reductive elimination from the Rh(III) species. Instead, the Rh(V) -nitrenoid intermediate could be formed by migration of the pivalate from N to Rh, which undergoes the heterocyclization much more easily and complementary ring-formations could be modulated by the nature of the substituent at the α-carbon. When a vinyl is attached, the stepwise 1,3-allylic migration occurs prior to the pivalate migration and the 8-membered ring product will be formed. On the other hand, the pivalate migration becomes more favorable for the phenyl-contained intermediate because of the difficult 1,3-allylic migration accompanied by dearomatization, thus the 5-membered ring product was formed selectively. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ligature wires and elastomeric rings: two methods of ligation, and their association with microbial colonization of Streptococcus mutans and lactobacilli.

PubMed

Forsberg, C M; Brattström, V; Malmberg, E; Nord, C E

1991-10-01

Twelve orthodontic patients undergoing treatment with fixed appliances took part in the present study. In all patients elastomeric rings were used for ligation on one side of the dental arch midline, whereas steel wires were used on the opposite side. The number of micro-organisms in samples of plaque, taken from the labial surface of the upper lateral incisors, was recorded on five occasions during treatment. In samples of saliva, the numbers of Streptococcus mutans and lactobacilli were recorded on the same occasions. This registration was also made on two occasions before insertion of the fixed appliance, and 6 weeks after the period of active treatment. The results showed that, in the majority of patients, the incisor which was attached to the arch-wire with an elastomeric ring, exhibited a greater number of micro-organisms in the plaque than the incisor ligated with steel wire. Following insertion of fixed appliances the number of S. mutans and lactobacilli in saliva increased significantly. Variations in the number of micro-organisms in the saliva during active treatment were not reflected in any relative increase or decrease in microbial colonization on either steel ligatures or elastomeric rings. The use of retainers after active treatment was not associated with increased numbers of micro-organisms in the saliva.

Fast Response, Open-Celled Porous, Shape Memory Effect Actuators with Integrated Attachments

NASA Technical Reports Server (NTRS)

Jardine, Andrew Peter (Inventor)

2015-01-01

This invention relates to the exploitation of porous foam articles exhibiting the Shape Memory Effect as actuators. Each foam article is composed of a plurality of geometric shapes, such that some geometric shapes can fit snugly into or around rigid mating connectors that attach the Shape Memory foam article intimately into the load path between a static structure and a moveable structure. The foam is open-celled, composed of a plurality of interconnected struts whose mean diameter can vary from approximately 50 to 500 microns. Gases and fluids flowing through the foam transfer heat rapidly with the struts, providing rapid Shape Memory Effect transformations. Embodiments of porous foam articles as torsional actuators and approximately planar structures are disposed. Simple, integral connection systems exploiting the ability to supply large loads to a structure, and that can also supply hot and cold gases and fluids to effect rapid actuation are also disposed.

Following the moving and changing attachments and assemblages of 'addiction': Applying the actor network approach to autobiographies.

PubMed

Törrönen, Jukka; Tigerstedt, Christoffer

2018-04-01

The article applies actor network theory (ANT) to autobiographical data on alcohol dependence to explore what ANT can offer to the analysis of 'addiction stories'. By defining 'addiction' as a relational achievement, as the effect of elements acting together as a configuration of human and non-human actors, the article demonstrates how the moving and changing attachments of addiction can be dynamically analyzed with concepts of 'assemblage', 'mediator', 'tendency', 'translation', 'trajectory', 'immutable mobile', 'fluid' and 'bush fire'. The article shows how the reduction of alcohol dependence simply to genetic factors, neurobiological causes, personality disorders and self-medication constitutes an inadequate explanation. As 'meta theories', they illuminate addiction one-sidedly. Instead, as ANT pays attention to multiple heterogeneous mediators, it specifies in what way the causes identified in 'meta theories' may together with other actors participate in addiction assemblages. When following the development of addiction assemblages, we focus on situational sequences of action, in which human and non-human elements are linked to each other, and we trace how the relational shape of addiction changes from one sequence to another as a transforming assemblage of heterogeneous attachments that either maintain healthy subjectivities or destabilize them. The more attachments assemblages of addiction are able to make that are flexible and durable from one event to another, the stronger also the addiction-based subjectivities. Similarly, the fewer attachments that assemblages of addiction are able to keep in their various translations, the weaker the addiction-based subjectivities also become. An ANT-inspired analysis has a number of implications for the prevention and treatment of addiction: it suggests that in the prevention and treatment of addiction, the aim should hardly be to get rid of dependencies. Rather, the ambition should be the identification of attachments and relations that enable unhealthy practices and the development of harm as part of specific actor networks. Copyright © 2018 Elsevier B.V. All rights reserved.

Extreme pressure fluid sample transfer pump

DOEpatents

Halverson, Justin E.; Bowman, Wilfred W.

1990-01-01

A transfer pump for samples of fluids at very low or very high pressures comprising a cylinder having a piston sealed with an O-ring, the piston defining forward and back chambers, an inlet and exit port and valve arrangement for the fluid to enter and leave the forward chamber, and a port and valve arrangement in the back chamber for adjusting the pressure across the piston so that the pressure differential across the piston is essentially zero and approximately equal to the pressure of the fluid so that the O-ring seals against leakage of the fluid and the piston can be easily moved, regardless of the pressure of the fluid. The piston may be actuated by a means external to the cylinder with a piston rod extending through a hole in the cylinder sealed with a bellows attached to the piston head and the interior of the back chamber.

8-Fluoro-4-oxo-4H-chromene-3-carbalde­hyde

PubMed Central

Ishikawa, Yoshinobu

2014-01-01

In the title compound, C10H5FO3, the non-H atoms of the 8-fluoro­chromone unit are essentially coplanar (r.m.s. deviation = 0.0259 Å), with a largest deviation from the mean plane of 0.0660 (12) Å for the chromone carbonyl O atom. The formyl group is twisted with respect to the attached ring [C—C—C—O torsion angles = −11.00 (19) and 170.81 (11)°]. In the crystal, mol­ecules are linked via weak C—H⋯O hydrogen bonds along the a axis and [-101], forming corrugated layers parallel to (010). In addition, π–π stacking inter­actions [centroid–centroid distance between the planes of the pyran and benzene rings = 3.519 (2) Å] are observed between these layers. PMID:25161562

Gas turbine vane platform element

DOEpatents

Campbell, Christian X [Oviedo, FL; Schiavo, Anthony L [Oviedo, FL; Morrison, Jay A [Oviedo, FL

2012-08-28

A gas turbine CMC shroud plate (48A) with a vane-receiving opening (79) that matches a cross-section profile of a turbine vane airfoil (22). The shroud plate (48A) has first and second curved circumferential sides (73A, 74A) that generally follow the curves of respective first and second curved sides (81, 82) of the vane-receiving opening. Walls (75A, 76A, 77A, 78A, 80, 88) extend perpendicularly from the shroud plate forming a cross-bracing structure for the shroud plate. A vane (22) may be attached to the shroud plate by pins (83) or by hoop-tension rings (106) that clamp tabs (103) of the shroud plate against bosses (105) of the vane. A circular array (20) of shroud plates (48A) may be assembled to form a vane shroud ring in which adjacent shroud plates are separated by compressible ceramic seals (93).

Skylab

NASA Image and Video Library

1972-05-01

This photograph shows technicians performing a checkout of the Metabolic Analyzer (center background) and the Ergometer (foreground) in the Orbital Workshop (OWS). The shower compartment is at right. The Ergometer (Skylab Experiment M171) evaluated man's metabolic effectiveness and cost of work in space environment. Located in the experiment and work area of the OWS, the shower compartment was a cylindrical cloth enclosure that was folded flat when not in use. The bottom ring of the shower was fastened to the floor and contained foot restraints. The upper ring contained the shower head and hose. To use the shower, the astronaut filled a pressurized portable bottle with heated water and attached the bottle to the ceiling. A flexible hose cornected the water bottle to a handheld shower head. The astronaut pulled the cylindrical shower wall up into position and bathed, using liquid soap. Both soap and water were carefully rationed, having been premeasured for economical use.

Synthesis, characterization and catalytic oxidation properties of multi-wall carbon nanotubes with a covalently attached copper(II) salen complex

NASA Astrophysics Data System (ADS)

Salavati-Niasari, Masoud; Bazarganipour, Mehdi

2009-06-01

Hydroxyl functionalized copper(II) Schiff-base, N,N'-bis(4-hydroxysalicylidene)-ethylene-1,2-diaminecopper(II), [Cu((OH) 2-salen)], has been covalently anchored on modified MWCNTs. The new modified MWCNTs ([Cu((OH) 2-salen)]-MWCNTs) have been characterized by TEM, thermal analysis, XRD, XPS, UV-vis, DRS, FT-IR spectroscopy and elemental analysis. The modified copper(II) MWCNTs solid was used to affect the catalytic oxidation of ethylbenzene with tert-butylhydroperoxide as the oxidant at 333 K. The system is truly heterogeneous (no leaching observed) and reusable (no decrease in activity) in three consecutive runs. Acetophenone was the major product though small amounts of o- and p-hydroxyacetophenones were also formed revealing that C-H bond activation takes place both at benzylic and aromatic ring carbon atoms. Ring hydroxylation was more over the "neat" complexes than over the encapsulated complexes.

KSC-2011-6348

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., NASA's Gravity Recovery and Interior Laboratory-A (GRAIL-A) lunar probe slowly approaches the spacecraft adapter ring, at left, where GRAIL-B is already secured. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

KSC-2011-6345

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., NASA's Gravity Recovery and Interior Laboratory-A (GRAIL-A) lunar probe is lifted from its workstand. The spacecraft will be transferred to the spacecraft adapter ring, at left, where GRAIL-B is already secured. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

KSC-2011-6346

NASA Image and Video Library

2011-08-10

CAPE CANAVERAL, Fla. -- At Astrotech Space Operation's payload processing facility in Titusville, Fla., NASA's Gravity Recovery and Interior Laboratory-A (GRAIL-A) lunar probe is lifted from its workstand and across the clean room toward the spacecraft adapter ring, at left, where GRAIL-B is already secured. After the twin GRAIL spacecraft are attached to the adapter ring in their side-by-side launch configuration, they will be transported to the launch pad. GRAIL will fly in tandem orbits around the moon for several months to measure its gravity field. GRAIL's primary science objectives are to determine the structure of the lunar interior, from crust to core, and to advance understanding of the thermal evolution of the moon. Launch aboard a United Launch Alliance Delta II rocket from Space Launch Complex 17B on Cape Canaveral Air Force Station is scheduled for Sept. 8. For more information, visit http://www.nasa.gov/grail. Photo credit: NASA/Jim Grossmann

1-Nitro-4-(4-nitro-phen-oxy)benzene: a second monoclinic polymorph.

PubMed

Naz, Mehwish; Akhter, Zareen; McKee, Vickie; Nadeem, Arif

2013-11-06

In the title compound, C12H8N2O5, the aromatic rings are inclined to one another by 56.14 (7)°. The nitro groups are inclined by to the benzene rings to which they are attached by 3.86 (17) and 9.65 (15)°. In the crystal, mol-ecules are linked by C-H⋯O hydrogen bonds, forming a three-dimensional structure. The title compound is a new monoclinic polymorph, crystallizing in space group P21/c. The first polymorph crystallized in space group C2/c and the mol-ecule possesses twofold rotation symmetry. Two low-temperature structures of this polymorph (150 K and 100 K, respectively) have been reported [Meciarova et al. (2004). Private Communication (refcode IXOGAD). CCDC, Cambridge, England, and Dey & Desiraju (2005). Chem. Commun. pp. 2486-2488].

Adult attachment in the clinical management of borderline personality disorder.

PubMed

Fossati, Andrea

2012-05-01

Borderline personality disorder (BPD) is a common psychiatric disorder associated with severe functional impairment, high rates of suicide and comorbid psychiatric illness, intensive use of treatment, and high costs to society. The etiology and pathogenesis of BPD are still uncertain, although an interaction between biological and psychosocial factors has been proposed to explain how the condition develops. Attachment disturbances represent one of the developmental risk factors that have been most consistently found to be associated with BPD, with a number of studies reporting a significant strong association between insecure attachment and BPD, notwithstanding the variety of measures and attachment types employed in these studies. In this article, the author first reviews clinical descriptions and research findings concerning the association between attachment disturbances and BPD and then discusses how attachment theory may help clinicians who work with patients with BPD better understand the psychopathology of the illness and plan treatment.

[Strengthening the capacity of reference in response to violence in society and within the family].

PubMed

Suess, G J

2003-05-01

Results of longitudinal studies in developmental psychology have shown the importance of protective factors especially within high risk samples for adaptive development as they serve as puffers against many risks. An outstanding protective factor is a secure parent-child attachment relationship. This article outlines the different ways how attachment relationships can serve as protective mechanisms and especially how disorganized attachment relationships are leading to maladaptation and hostile attitudes and behaviors. In doing so it underscores the special importance of attachment experiences in early infancy. The concept of attachment relationship is described as opposed to the bonding concept with regard to its implications for practice. One of the first is to intervene early. In the final part the evidence based early intervention program "STEEP" is described as an application of attachment research on a poverty sample and as a response to violence.

On the buckling of elastic rings by external confinement.

PubMed

Hazel, Andrew L; Mullin, Tom

2017-05-13

We report the results of an experimental and numerical investigation into the buckling of thin elastic rings confined within containers of circular or regular polygonal cross section. The rings float on the surface of water held in the container and controlled removal of the fluid increases the confinement of the ring. The increased compressive forces can cause the ring to buckle into a variety of shapes. For the circular container, finite perturbations are required to induce buckling, whereas in polygonal containers the buckling occurs through a linear instability that is closely related to the canonical Euler column buckling. A model based on Kirchhoff-Love beam theory is developed and solved numerically, showing good agreement with the experiments and revealing that in polygons increasing the number of sides means that buckling occurs at reduced levels of confinement.This article is part of the themed issue 'Patterning through instabilities in complex media: theory and applications.' © 2017 The Author(s).

On the buckling of elastic rings by external confinement

PubMed Central

Hazel, Andrew L.

2017-01-01

We report the results of an experimental and numerical investigation into the buckling of thin elastic rings confined within containers of circular or regular polygonal cross section. The rings float on the surface of water held in the container and controlled removal of the fluid increases the confinement of the ring. The increased compressive forces can cause the ring to buckle into a variety of shapes. For the circular container, finite perturbations are required to induce buckling, whereas in polygonal containers the buckling occurs through a linear instability that is closely related to the canonical Euler column buckling. A model based on Kirchhoff–Love beam theory is developed and solved numerically, showing good agreement with the experiments and revealing that in polygons increasing the number of sides means that buckling occurs at reduced levels of confinement. This article is part of the themed issue ‘Patterning through instabilities in complex media: theory and applications.’ PMID:28373386

Evidence of femtosecond-laser pulse induced cell membrane nanosurgery

NASA Astrophysics Data System (ADS)

Katchinskiy, Nir; Godbout, Roseline; Elezzabi, Abdulhakem Y.

2017-02-01

The mechanism of femtosecond laser nanosurgical attachment is investigated in the following article. Using sub-10 femtosecond laser pulses with 800 nm central wavelength were used to attach retinoblastoma cells. During the attachment process the cell membrane phospholipid bilayers hemifuse into one shared phospholipid bilayer, at the location of attachment. Transmission electron microscopy was used in order to verify the above hypothesis. Based on the imaging results, it was concluded that the two cell membrane coalesce to form one single shared membrane. The technique of cell-cell attachment via femtosecond laser pulses could potentially serve as a platform for precise cell membrane manipulation. Manipulation of the cellular membrane is valuable for studying diseases such as cancer; where the expression level of plasma proteins on the cell membrane is altered.

Attachment-based family therapy for depressed and suicidal adolescents: theory, clinical model and empirical support.

PubMed

Ewing, E Stephanie Krauthamer; Diamond, Guy; Levy, Suzanne

2015-01-01

Attachment-Based Family Therapy (ABFT) is a manualized family-based intervention designed for working with depressed adolescents, including those at risk for suicide, and their families. It is an empirically informed and supported treatment. ABFT has its theoretical underpinnings in attachment theory and clinical roots in structural family therapy and emotion focused therapies. ABFT relies on a transactional model that aims to transform the quality of adolescent-parent attachment, as a means of providing the adolescent with a more secure relationship that can support them during challenging times generally, and the crises related to suicidal thinking and behavior, specifically. This article reviews: (1) the theoretical foundations of ABFT (attachment theory, models of emotional development); (2) the ABFT clinical model, including training and supervision factors; and (3) empirical support.

Terahertz Response of a Microfabricated Rod Split-Ring-Resonator Electromagnetic Metamaterial

NASA Astrophysics Data System (ADS)

Moser, H. O.; Casse, B. D.; Wilhelmi, O.; Saw, B. T.

2005-02-01

The first electromagnetic metamaterials (EM3) produced by microfabrication are reported. They are based on the rod split-ring-resonator design as proposed by Pendry et al. [

3D reconstruction of hollow parts analyzing images acquired by a fiberscope

NASA Astrophysics Data System (ADS)

Icasio-Hernández, Octavio; Gonzalez-Barbosa, José-Joel; Hurtado-Ramos, Juan B.; Viliesid-Alonso, Miguel

2014-07-01

A modified fiberscope used to reconstruct difficult-to-reach inner structures is presented. By substituting the fiberscope’s original illumination system, we can project a profile-revealing light line inside the object of study. The light line is obtained using a sandwiched power light-emitting diode (LED) attached to an extension arm on the tip of the fiberscope. Profile images from the interior of the object are then captured by a camera attached to the fiberscope’s eyepiece. Using a series of those images at different positions, the system is capable of generating a 3D reconstruction of the object with submillimeter accuracy. Also proposed is the use of a combination of known filters to remove the honeycomb structures produced by the fiberscope and the use of ring gages to obtain the extrinsic parameters of the camera attached to the fiberscope and the metrological traceability of the system. Several standard ring diameter measurements were compared against their certified values to improve the accuracy of the system. To exemplify an application, a 3D reconstruction of the interior of a refrigerator duct was conducted. This reconstruction includes accuracy assessment by comparing the measurements of the system to a coordinate measuring machine. The system, as described, is capable of 3D reconstruction of the interior of objects with uniform and non-uniform profiles from 10 to 60 mm in transversal dimensions and a depth of 1000 mm if the material of the walls of the object is translucent and allows the detection of the power LED light from the exterior through the wall. If this is not possible, we propose the use of a magnetic scale which reduces the working depth to 170 mm. The assessed accuracy is around ±0.15 mm in 2D cross-section reconstructions and ±1.3 mm in 1D position using a magnetic scale, and ±0.5 mm using a CCD camera.

Teaching as a "Central Life Interest" of Metropolitan Secondary Teachers.

ERIC Educational Resources Information Center

Hanna, Charles Clifford

This article examines the interrelationship between teachers and their work of teaching, as observed in a study conducted in 1969 in Minneapolis and St. Paul, and intended to assess the extent and kind of attachments which secondary school teachers hold for their teaching when the total of life attachments and interactions is taken into account.…

Easing the Separation Process for Infants, Toddlers, and Families

ERIC Educational Resources Information Center

Balaban, Nancy

2006-01-01

Attachment and separation are the stuff of which life is made. The bonds between family and child promote resilience, self-regulation, and a positive sense of self. In this article, the author focuses her discussion on the importance of attachment to children's development. She has cited some theories that can help her explain further. For…

If the Want Is Strong Enough, the How Will Come

ERIC Educational Resources Information Center

Perna, Mark C.

2006-01-01

This article discusses how benefits can be used to market a school. Creating emotional attachment can help use benefits to market the school and its programs to a target audience. Such emotional attachment can be created through clear and concise benefit statements. Powerful benefit statements that project a clear picture of the programs, services…

Assessment of Industrial Attachment: Issues and Concerns of Chinhoyi University of Technology's Undergraduate Degree Programme, Zimbabwe

ERIC Educational Resources Information Center

Chinyemba, Fredreck; Bvekerwa, Sailos T.

2012-01-01

This article presents findings from an action research that explored industrial attachment supervision and assessment issues and concerns of CUT's (Chinhoyi University of Technology) undergraduate degree programme. The study was motivated by the observation that there is no research project contacted in order to determine the social and economic…

From Early Attachment to Engagement with Learning in School: The Role of Self-Regulation and Persistence

ERIC Educational Resources Information Center

Drake, Kim; Belsky, Jay; Fearon, R. M. Pasco

2014-01-01

This article presents theoretical arguments and supporting empirical evidence suggesting that attachment experiences in early life may be important in the later development of self-regulation and conscientious behavior. Analyses of data from the National Institute of Child Health and Human Development (NICHD) Study of Early Child Care and Youth…

Formations of Attachment Relationships towards Teachers Lead to Conclusions for Public Child Care

ERIC Educational Resources Information Center

Beckh, Kathrin; Becker-Stoll, Fabienne

2016-01-01

The aim of this article is to demonstrate how relational experiences with parents and preschool teachers provide children with a feeling of security that facilitates the development of competence in different domains. We first focus on the mechanisms regarding how secure attachments to parents serve as an important foundation for later…

Taking Care with Attachment Disorders and Autistic-Like Traits: The Potential Significance of Cognitive Markers

ERIC Educational Resources Information Center

Melling, Richard; Smethurst, Nicola

2017-01-01

The behaviours associated with the attachment disorders (ADs) appear to overlap substantially with those linked to the autism spectrum (AS). Given the similarities between the two conditions this article urges caution when drawing conclusions concerning the likely aetiology of presenting difficulties in any particular case. Attention is drawn to…

Rethinking Attachment: Fostering Positive Relationships between Infants, Toddlers and Their Primary Caregivers

ERIC Educational Resources Information Center

Ebbeck, Marjory; Yim, Hoi Yin Bonnie

2009-01-01

This article provides a synthesis of current theory and research in relation to attachment between infants/toddlers and their caregivers. Worldwide statistics show that there are a significant number of women working in the global labour market. In Australia, recent research also found that over 300,000 children aged 0-5 years are currently…

All Aboard the Desistance Line: First Stop, Producing Prosocial Prison Attachments within an HIV Prison-Based Peer Program

ERIC Educational Resources Information Center

Collica-Cox, Kimberly

2016-01-01

This article explores the importance of social bonds in facilitating an investment in prosocial behavior amongst female prisoners working as HIV peer educators. Female prisoners can lack strong prosocial attachments to both individuals and institutions prior to incarceration. Absent this bond, little prevents the female prisoner from recidivating.…

75 FR 69369 - Walking-Working Surfaces and Personal Protective Equipment (Fall Protection Systems)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-12

... attachments that supplement these documents (e.g., studies, journal articles), submit these attachments in... requests for an informal public hearing (see, e.g., Ex. OSHA-2007-0072-0150.1). Accordingly, OSHA [[Page... questioning. At the close of the hearing, the ALJ will establish a post-hearing comment period for parties who...

A node organization in the actomyosin contractile ring generates tension and aids stability.

PubMed

Thiyagarajan, Sathish; Wang, Shuyuan; O'Shaughnessy, Ben

2017-11-07

During cytokinesis, a contractile actomyosin ring constricts and divides the cell in two. How the ring marshals actomyosin forces to generate tension is not settled. Recently, a superresolution microscopy study of the fission yeast ring revealed that myosins and formins that nucleate actin filaments colocalize in plasma membrane-anchored complexes called nodes in the constricting ring. The nodes move bidirectionally around the ring. Here we construct and analyze a coarse-grained mathematical model of the fission yeast ring to explore essential consequences of the recently discovered ring ultrastructure. The model reproduces experimentally measured values of ring tension, explains why nodes move bidirectionally, and shows that tension is generated by myosin pulling on barbed-end-anchored actin filaments in a stochastic sliding-filament mechanism. This mechanism is not based on an ordered sarcomeric organization. We show that the ring is vulnerable to intrinsic contractile instabilities, and protection from these instabilities and organizational homeostasis require both component turnover and anchoring of components to the plasma membrane. © 2017 Thiyagarajan, Wang, and O’Shaughnessy. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Stable carbon isotopic composition of tree rings from a pine tree from Augustów Wilderness, Poland, as a temperature and local environment conditions indicator.

PubMed

Pawelczyk, Slawomira; Pazdur, Anna; Halas, Stanislaw

2004-06-01

Tree rings can be used as archives of climatic and environmental data with annual resolution. Tree rings widths, maximum late wood density and other parameters as stable composition in tree rings can be used for the reconstruction of past climatic and environmental changes. Stable carbon isotope ratios in tree rings may provide valuable information on past climatic conditions. 13C/12C ratios of plant organic matter can reflect corresponding 13C/12C ratio of atmospheric CO2 during formation of the rings. Investigations of isotopic carbon composition in tree rings from in the ecologically clean the Augustów Wilderness region in the north-eastern part of Poland (22 degrees 58'E, 53 degrees 51'N) (nowadays a sanctuary) were undertaken. Series of delta13C in alpha-cellulose and in wholewood were acquired. Those measurements constituted a part of more complex investigations of carbon isotope composition in tree rings including the measurements of radiocarbon concentration and tree ring widths. This article presents preliminary results. It is argued that contrary to the tree ring widths and delta13C in wholewood that do not reveal significant correlation with temperature, the variation of delta13C in the latewood alpha-cellulose is correlated with combined July and August temperatures. Copyright 2004 Taylor and Francis Ltd.

Role of methyl group number on SOA formation from aromatic hydrocarbons photooxidation under low NOx conditions

NASA Astrophysics Data System (ADS)

Li, L.; Tang, P.; Nakao, S.; Chen, C.-L.; Cocker, D. R., III

2015-11-01

Substitution of methyl groups onto the aromatic ring determines the SOA formation from the aromatic hydrocarbon precursor. This study links the number of methyl groups on the aromatic ring to SOA formation from aromatic hydrocarbons photooxidation under low NOx conditions (HC / NO > 10 ppb C : ppb). Aromatic hydrocarbons with increasing numbers of methyl groups are systematically studied. SOA formation from pentamethylbenzene and hexamethylbenzene are reported for the first time. A decreasing SOA yield with increasing number of methyl groups is observed. Linear trends are found in both f44 vs. f43 and O / C vs. H / C for SOA from aromatic hydrocarbons with zero to six methyl groups. An SOA oxidation state predictive method based on benzene is used to examine the effect of added methyl groups on aromatic oxidation under low NOx conditions. Further, the impact of methyl group number on density and volatility of SOA from aromatic hydrocarbons is explored. Finally, a mechanism for methyl group impact on SOA formation is suggested. Overall, this work suggests as more methyl groups are attached on the aromatic ring, SOA products from these aromatic hydrocarbons become less oxidized per mass/carbon.

Ground state structure of high-energy-density polymeric carbon monoxide

NASA Astrophysics Data System (ADS)

Xia, Kang; Sun, Jian; Pickard, Chris J.; Klug, Dennis D.; Needs, Richard J.

2017-04-01

Crystal structure prediction methods and first-principles calculations have been used to explore low-energy structures of carbon monoxide (CO). Contrary to the standard wisdom, the most stable structure of CO at ambient pressure was found to be a polymeric structure of P n a 21 symmetry rather than a molecular solid. This phase is formed from six-membered (four carbon + two oxygen) rings connected by C=C double bonds with two double-bonded oxygen atoms attached to each ring. Interestingly, the polymeric P n a 21 phase of CO has a much higher energy density than trinitrotoluene (TNT). On compression to about 7 GPa, P n a 21 is found to transform into another chainlike phase of C c symmetry which has similar ring units to P n a 21 . On compression to 12 GPa, it is energetically favorable for CO to polymerize into a purely single bonded C m c a phase, which is stable over a wide pressure range and transforms into the previously known C m c m phase at around 100 GPa. Thermodynamic stability of these structures was verified using calculations with different density functionals, including hybrid and van der Waals corrected functionals.

A Computational Study of Structure and Reactivity of N-Substitued-4-Piperidones Curcumin Analogues and Their Radical Anions.

PubMed

Martínez-Cifuentes, Maximiliano; Weiss-López, Boris; Araya-Maturana, Ramiro

2016-12-02

In this work, a computational study of a series of N -substitued-4-piperidones curcumin analogues is presented. The molecular structure of the neutral molecules and their radical anions, as well as their reactivity, are investigated. N -substituents include methyl and benzyl groups, while substituents on the aromatic rings cover electron-donor and electron-acceptor groups. Substitutions at the nitrogen atom do not significantly affect the geometry and frontier molecular orbitals (FMO) energies of these molecules. On the other hand, substituents on the aromatic rings modify the distribution of FMO. In addition, they influence the capability of these molecules to attach an additional electron, which was studied through adiabatic (AEA) and vertical electron affinities (VEA), as well as vertical detachment energy (VDE). To study electrophilic properties of these structures, local reactivity indices, such as Fukui ( f ⁺) and Parr ( P ⁺) functions, were calculated, and show the influence of the aromatic rings substituents on the reactivity of α,β-unsaturated ketones towards nucleophilic attack. This study has potential implications for the design of curcumin analogues based on a 4-piperidone core with desired reactivity.

Contributions of Attachment Theory and Research: A Framework for Future Research, Translation, and Policy

PubMed Central

Cassidy, Jude; Jones, Jason D.; Shaver, Phillip R.

2014-01-01

Attachment theory has been generating creative and impactful research for almost half a century. In this article we focus on the documented antecedents and consequences of individual differences in infant attachment patterns, suggesting topics for further theoretical clarification, research, clinical interventions, and policy applications. We pay particular attention to the concept of cognitive “working models” and to neural and physiological mechanisms through which early attachment experiences contribute to later functioning. We consider adult caregiving behavior that predicts infant attachment patterns, and the still-mysterious “transmission gap” between parental AAI classifications and infant Strange Situation classifications. We also review connections between attachment and (a) child psychopathology, (b) neurobiology, (c) health and immune function, (d) empathy, compassion, and altruism, (e) school readiness, and (f) culture. We conclude with clinical-translational and public policy applications of attachment research that could reduce the occurrence and maintenance of insecure attachment during infancy and beyond. Our goal is to inspire researchers to continue advancing the field by finding new ways to tackle long-standing questions and by generating and testing novel hypotheses. PMID:24342848

Manually Operated Welding Wire Feeder

NASA Technical Reports Server (NTRS)

Rybicki, Daniel J. (Inventor)

2001-01-01

A manual welding wire feeder apparatus comprising a bendable elongate metal frame with a feed roller mounted at the center thereof for rotation about an axis transverse to the longitudinal axis of the frame. The frame ends are turned up as tabs and each provided with openings in alignment with each other and the mid-width center of the roller surface. The tab openings are sized to accommodate welding wire and each extends to a side edge of the tab, both opening on the same side of the frame, whereby welding wire can be side-loaded onto the frame. On the side of the frame, opposite the roller a lock ring handle is attached tangentially and is rotatable about the attachment point and an axis perpendicular to the frame. The device is grasped in the hand normally used to hold the wire. A finger is placed through the loop ring and the frame positioned across the palm and lower fingers. The thumb is positioned atop the wire so it can be moved from the back of the frame across the roller, and towards the front. In doing so, the wire is advanced at a steady rate in axial alignment with the tab openings and roller. To accommodate different wire diameters the frame is bendable about its center in the plane of the frame axis and wire so as to keep the wire in sufficient tension against the roller and to keep the wire fixed when the frame is tilted and thumb pressure released.

Behavior of 2,6-bis(decyloxy)naphthalene inside lipid bilayer.

PubMed

Kepczynski, Mariusz; Kumorek, Marta; Stepniewski, Michał; Róg, Tomasz; Kozik, Bartłomiej; Jamróz, Dorota; Bednar, Jan; Nowakowska, Maria

2010-12-02

Interactions between small organic molecules and lipid or cell membranes are important because of their role in the distribution of biologically active substances inside the membrane and their permeation through the cell membranes. In the current paper, we have explored the effect of the attachment of long hydrocarbon tails on the behavior of small organic molecule inside the lipid membrane. Naphthalene with two decyloxy groups attached at the opposite sites of the ring (2,6-bis(decyloxy)naphthalene, 3) was synthesized and incorporated into phosphatidylcholine (PC) vesicles. Fluorescence methods as well as molecular dynamic (MD) simulations were used to estimate the position, orientation, and migration of compound 3 in PC bilayer. It was found that the naphthalene ring of compound 3 resides in the upper acyl chain region of the bilayer and the hydrocarbon tails are directed to the center of the bilayer. As was shown with cryotransmission electron microscopy (cryo-TEM), such lipidlike conformation enables compound 3 to be incorporated into liposomes at a very high content without their disintegration. Moreover, compound 3 can migrate from one leaflet to other. The mechanism of this process is, however, different from that characteristic of the flip-flop event of lipid molecules in the membrane. Finally, the possible application of compound 3 as a rotational molecular probe for monitoring fluidity of liposomal membrane in the acyl side chain region was checked by studies of the effect of cholesterol on the fluorescence anisotropy of 3.

Attachment-Based Family Therapy: A Review of the Empirical Support.

PubMed

Diamond, Guy; Russon, Jody; Levy, Suzanne

2016-09-01

Attachment-based family therapy (ABFT) is an empirically supported treatment designed to capitalize on the innate, biological desire for meaningful and secure relationships. The therapy is grounded in attachment theory and provides an interpersonal, process-oriented, trauma-focused approach to treating adolescent depression, suicidality, and trauma. Although a process-oriented therapy, ABFT offers a clear structure and road map to help therapists quickly address attachment ruptures that lie at the core of family conflict. Several clinical trials and process studies have demonstrated empirical support for the model and its proposed mechanism of change. This article provides an overview of the clinical model and the existing empirical support for ABFT. © 2016 Family Process Institute.

Maxillary rehabilitation using fixed and removable partial dentures with attachments: a clinical report.

PubMed

dos Santos Nunes Reis, José Maurício; da Cruz Perez, Luciano Elias; Alfenas, Bruna Fernandes Moreira; de Oliveira Abi-Rached, Filipe; Filho, João Neudenir Arioli

2014-01-01

Despite requiring dental crown preparation and possible root canal treatment, besides the difficulty of clinical and laboratory repairs, and financial burden, the association between fixed (FPD) and removable partial dentures (RPD) by means of attachments is an important alternative for oral rehabilitation, particularly when the use of dental implants and FPDs is limited or not indicated. Among the advantages of attachment-retained RPDs are the improvements in esthetics and biomechanics, as well as correction of the buccal arrangement of anterior teeth in Kennedy Class III partially edentulous arches. This article describes the treatment sequence and technique for the use of attachments in therapy combining FPD/RPD. © 2013 by the American College of Prosthodontists.

Hope in human attachment and spiritual connection.

PubMed

Allen, Jon G

2013-01-01

Using Karl Menninger's and Paul Pruyser's seminal writings, the author reviews the tradition of thought about hope at The Menninger Clinic and discusses the application of this tradition to patient education. From the perspective of contemporary attachment theory and research, he expands on Paul Pruyser's view of hope as based on an experience of benevolent connection. Such connection can be found-and disrupted-in attachment to God and in spirituality more broadly. The article concludes with commentary on the challenges clinicians face in making use of religion and spirituality as a resource for fostering hope.

Tuning the endothelial response: differential release of exocytic cargos from Weibel-Palade Bodies.

PubMed

Nightingale, Thomas D; McCormack, Jessica J; Grimes, William; Robinson, Christopher; Lopes da Silva, Mafalda; White, Ian J; Vaughan, Andrew; Cramer, Louise P; Cutler, Daniel F

2018-06-28

Endothelial cells harbour specialised storage organelles, Weibel-Palade Bodies (WPBs). Exocytosis of WPB content into the vascular lumen initiates primary haemostasis, mediated by Von Willebrands factor (VWF) and inflammation, mediated by several proteins including P-selectin. During full fusion, secretion of this large haemostatic protein and smaller pro-inflammatory proteins are thought to be inextricably linked. To determine if secretagogue-dependent differential release of WPB cargo occurs, and whether this is mediated by the formation of an actomyosin ring during exocytosis. We used VWF string analysis, leukocyte rolling assays, ELISA, spinning disk confocal microscopy, high-throughput confocal microscopy and inhibitor and siRNA treatments to demonstrate the existence of cellular machinery that allows differential release of WPB cargo proteins. Inhibition of the actomyosin ring differentially effects two processes regulated by WPB exocytosis; it perturbs VWF string formation but has no effect on leukocyte rolling. The efficiency of ring recruitment correlates with VWF release; the ratio of release of VWF to small cargoes decreases when ring recruitment is inhibited. The recruitment of the actin ring is time-dependent; fusion events occurring directly after stimulation are less likely to initiate haemostasis than later events, and is activated by PKC isoforms. Secretagogues differentially recruit the actomyosin ring, thus demonstrating one mechanism by which the pro-thrombotic effect of endothelial activation can be modulated. This potentially limits thrombosis whilst permitting a normal inflammatory response. These results have implications for the assessment of WPB fusion, cargo-content release and the treatment of patients with von Willebrand disease. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Low-threshold ultrafast all-optical switch implemented with metallic nanoshells in the photonic crystal ring resonator

NASA Astrophysics Data System (ADS)

Ghadrdan, Majid; Mansouri-Birjandi, Mohammad Ali

2017-11-01

An all-optical switch based on nonlinear photonic crystal ring resonator embedded with silica dielectric surrounded by silver nanoshell (NS) inside the ring resonator has been introduced and analyzed in this article. We considered silica with radius of 10 nm and silver with radius of 16 nm as core and shell, respectively. By placing NSs inside the photonic crystal ring resonator, we succeeded in reducing the threshold power to 12.8 mW/μm2 and the switching time to about 0.4 ps. The results of this research suggest a new technique for reducing switching light intensity. With small size, ultra-fast switching time, and low-threshold power, the structure has the potential to be applied in optical integration circuits and nanoscale optical chips.

Total synthesis of bryostatins: the development of methodology for the atom-economic and stereoselective synthesis of the ring C subunit.

PubMed

Trost, Barry M; Frontier, Alison J; Thiel, Oliver R; Yang, Hanbiao; Dong, Guangbin

2011-08-22

Bryostatins, a family of structurally complicated macrolides, exhibit an exceptional range of biological activities. The limited availability and structural complexity of these molecules makes development of an efficient total synthesis particularly important. This article describes our initial efforts towards the total synthesis of bryostatins, in which chemoselective and atom-economical methods for the stereoselective assembly of the ring C subunit were developed. A Pd-catalyzed tandem alkyne-alkyne coupling/6-endo-dig cyclization sequence was explored and successfully pursued in the synthesis of a dihydropyran ring system. Elaboration of this methodology ultimately led to a concise synthesis of the ring C subunit of bryostatins. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Biomechanics and functional morphology of a climbing monocot

PubMed Central

Hesse, Linnea; Wagner, Sarah T.; Neinhuis, Christoph

2016-01-01

Plants with a climbing growth habit possess unique biomechanical properties arising from adaptations to changing loading conditions connected with close attachment to mechanical supports. In monocot climbers, mechanical adaptation is restricted by the absence of a bifacial vascular cambium. Flagellaria indica was used to investigate the mechanical properties and adaptations of a monocot climber that, uniquely, attaches to the surrounding vegetation via leaf tendrils. Biomechanical methods such as three-point bending and torsion tests were used together with anatomical studies on tissue development, modification and distribution. In general, the torsional modulus was lower than the bending modulus; hence, torsional stiffness was less than flexural stiffness. Basal parts of mature stems showed the greatest stiffness while that of more apical stem segments levelled off. Mechanical properties were modulated via tissue maturation processes mainly affecting the peripheral region of the stem. Peripheral vascular bundles showed a reduction in the amount of conducting tissue while the proportion and density of the bundle sheath increased. Furthermore, adjacent bundle sheaths merged resulting in a dense ring of fibrous tissue. Although F. indica lacks secondary cambial growth, the climbing habit is facilitated by a complex interaction of tissue maturation and attachment. PMID:26819259

[The stigmatising of schizophrenia and autism in the Flemish daily papers].

PubMed

Thys, E; Struyven, C I; Danckaerts, M; De Hert, M

2014-01-01

A considerable social stigma is attached to many types of psychiatric disorders. However, research also shows that there are differences in the degree of social stigma attached to psychiatric disorders. There is evidence that the portrayal of schizophrenia in the media is particularly negative. To compare the degree of stigma in reporting of autism and schizophrenia in the Flemish daily newspapers. Via the websites of the seven Flemish daily newspapers, we searched for all articles published between 2008 and 2012 containing the keywords autism/autist(ic) and schizophrenia/schizophrenic. The collected articles (n = 4,181) were then graded to their stigmatising content. In the collected articles the coverage of autism was mostly positive, whereas the coverage of schizophrenia was predominantly negative. The contrast between the reporting on autism and on schizophrenia was very substantial (p < 0.0001) and the negative coverage of both disorders increased over time. The social stigma attached to schizophrenia is poignantly reflected in the Flemish newspapers. The fact that a disorder such as autism, which has many features in common with schizophrenia, is depicted in a much more favourable way than schizophrenia indicates that a more positive image of schizophrenia is not only desirable but also achievable.

Deletion of AMPKα1 attenuates the anticontractile effect of perivascular adipose tissue (PVAT) and reduces adiponectin release.

PubMed

Almabrouk, Tarek A M; Ugusman, Azizah B; Katwan, Omar J; Salt, Ian P; Kennedy, Simon

2017-10-01

Perivascular adipose tissue (PVAT) surrounds most blood vessels and secretes numerous active substances, including adiponectin, which produce a net anticontractile effect in healthy individuals. AMPK is a key mediator of cellular energy balance and may mediate the vascular effects of adiponectin. In this study, we investigated the role of AMPK within PVAT in mediating the anticontractile effect of PVAT. Endothelium-denuded aortic rings from wild-type (WT; Sv129) and α 1 AMPK knockout (KO) mice were mounted on a wire myograph. Dose-response curves to the AMPK-independent vasodilator cromakalim were studied in vessels with and without PVAT, and effect of pre-incubation with conditioned media and adiponectin on relaxation was also studied. The effect of AMPKα1 KO on the secretory profile of PVAT was assessed by elisa. Thoracic aortic PVAT from KO mice was morphologically indistinct from that of WT and primarily composed of brown adipose tissue. PVAT augmented relaxation to cromakalim in WT but not KO aortic rings. Addition of WT PVAT augmented relaxation in KO aortic rings but KO PVAT had no effect in WT rings. PVAT from KO mice secreted significantly less adiponectin and addition of adiponectin to either KO or WT aortic rings without PVAT augmented relaxation to cromakalim. An adiponectin blocking peptide significantly attenuated relaxation in WT rings with PVAT but not in KO rings. AMPKα1 has a critical role in maintaining the anticontractile actions of PVAT; an effect independent of the endothelium but likely mediated through altered adiponectin secretion or sensitivity. This article is part of a themed section on Molecular Mechanisms Regulating Perivascular Adipose Tissue - Potential Pharmacological Targets? To view the other articles in this section visit http://onlinelibrary.wiley.com/doi/10.1111/bph.v174.20/issuetoc. © 2016 The British Pharmacological Society.

Masculinities, Attachment Theory and Transformative Learning: A Discussion of Some Theoretical Considerations for Developing an Emotionally Secure Teaching Praxis

ERIC Educational Resources Information Center

Carberry, Damien

2017-01-01

This paper situates education as an integral component of the overall prison rehabilitation process. The article discusses how an educational practitioner's knowledge of attachment theory and masculinities can be utilized to develop a secure methodological teaching environment in the classroom of a prison education unit and create a space where…

75 FR 50793 - Bureau of Political-Military Affairs: Directorate of Defense Trade Controls; Notifications to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-17

... of $25,000,000 or more. The transaction contained in the attached certification involves the export... articles in the amount of $50,000,000 or more. The transaction contained in the attached certification... military equipment abroad and the export of firearms in the amount of $1,000,000 or more. The transaction...

Adolescent Mothers in a Transitional Living Facility: An Exploratory Study of Support Networks and Attachment Patterns

ERIC Educational Resources Information Center

Schwartz, Ann E.; McRoy, Ruth G.; Downs, A. Chris

2004-01-01

Most of the research literature on attachment and adolescent transitions has addressed youth in family settings. This article explores these issues with a sample of 25 pregnant and parenting teens living in a transitional shelter. Using case records and interview data as well as results of standardized measures of depression, self-esteem, child…

Narrative as a Window to the Inner Mental World of Young Children: Attachment Representations, Affect and Memory

ERIC Educational Resources Information Center

Priddis, Lynn E.; Howieson, Noel D.

2010-01-01

This article describes a procedure which has proven useful in facilitating narratives about experience of everyday family situations in order to provide insights into the inner world of children around five-seven years. The Windows to Attachment in Young Children (WAYC) consists of the procedure itself and scoring frameworks through which the…

Caregiving Antecedents of Secure Base Script Knowledge: A Comparative Analysis of Young Adult Attachment Representations

ERIC Educational Resources Information Center

Steele, Ryan D.; Waters, Theodore E. A.; Bost, Kelly K.; Vaughn, Brian E.; Truitt, Warren; Waters, Harriet S.; Booth-LaForce, Cathryn; Roisman, Glenn I.

2014-01-01

Based on a subsample (N = 673) of the NICHD Study of Early Child Care and Youth Development (SECCYD) cohort, this article reports data from a follow-up assessment at age 18 years on the antecedents of "secure base script knowledge", as reflected in the ability to generate narratives in which attachment-related difficulties are…

Shock Waves Oscillations in the Interaction of Supersonic Flows with the Head of the Aircraft

ERIC Educational Resources Information Center

Bulat, Pavel V.; Volkov, Konstantin N.

2016-01-01

In this article we reviewed the shock wave oscillation that occurs when supersonic flows interact with conic, blunt or flat nose of aircraft, taking into account the aerospike attached to it. The main attention was paid to the problem of numerical modeling of such oscillation, flow regime classification, and cases where aerospike attachment can…

Microbial biotransformation of bioactive flavonoids.

PubMed

Cao, Hui; Chen, Xiaoqing; Jassbi, Amir Reza; Xiao, Jianbo

2015-01-01

The bioactive flavonoids are considered as the most important phytochemicals in food, which exert a wide range of biological benefits for human being. Microbial biotransformation strategies for production of flavonoids have attracted considerable interest because they allow yielding novel flavonoids, which do not exist in nature. In this review, we summarize the existing knowledge on the production and biotransformation of flavonoids by various microbes. The main reactions during microbial biotransformation are hydroxylation, dehydroxylation, O-methylation, O-demethylation, glycosylation, deglycosylation, dehydrogenation, hydrogenation, C ring cleavage of the benzo-γ-pyrone system, cyclization, and carbonyl reduction. Cunninghamella, Penicillium, and Aspergillus strains are very popular to biotransform flavonoids and they can perform almost all the reactions with excellent yields. Aspergillus niger is one of the most applied microorganisms in the flavonoids' biotransformation; for example, A. niger can transfer flavanone to flavan-4-ol, 2'-hydroxydihydrochalcone, flavone, 3-hydroxyflavone, 6-hydroxyflavanone, and 4'-hydroxyflavanone. The hydroxylation of flavones by microbes usually happens on the ortho position of hydroxyl group on the A ring and C-4' position of the B ring and microbes commonly hydroxylate flavonols at the C-8 position. The microorganisms tend to hydroxylate flavanones at the C-5, 6, and 4' positions; however, for prenylated flavanones, dihydroxylation often takes place on the C4α=C5α double bond on the prenyl group (the side chain of A ring). Isoflavones are usually hydroxylated at the C-3' position of the B ring by microorganisms. The microbes convert flavonoids to their 7-O-glycosides and 3-O-glycosides (when flavonoids have a hydroxyl moiety at the C-3 position). The demethylation of multimethoxyl flavonoids by microbes tends to happen at the C-3' and C-4' positions of the B ring. Multimethoxyl flavanones and isoflavone are demethylated at the C-7 and C-4' positions. The O-methylation of flavonols happens at the C-3' and C-4' and microorganisms O-methylate flavones at the C-6 position and the O-methylation of flavanones, usually took place on the hydroxyl groups of the A ring. The prenyl flavanones were cyclized at the prenyl side chain to form a new five-member ring attached to the A ring. Chalcones were regioselectively cyclized to flavanones. Hydrogenation of flavonoids was only reported on transformation of chalcones to dihydrochalcones. The dehydrogenation of flavanoids to flavonoids was not comprehensively studied. Copyright © 2014 Elsevier Inc. All rights reserved.

Higher-order paraxial theory of the propagation of ring rippled laser beam in plasma: Relativistic ponderomotive regime

DOE Office of Scientific and Technical Information (OSTI.GOV)

Purohit, Gunjan, E-mail: gunjan75@gmail.com; Rawat, Priyanka; Chauhan, Prashant

This article presents higher-order paraxial theory (non-paraxial theory) for the ring ripple formation on an intense Gaussian laser beam and its propagation in plasma, taking into account the relativistic-ponderomotive nonlinearity. The intensity dependent dielectric constant of the plasma has been determined for the main laser beam and ring ripple superimposed on the main laser beam. The dielectric constant of the plasma is modified due to the contribution of the electric field vector of ring ripple. Nonlinear differential equations have been formulated to examine the growth of ring ripple in plasma, self focusing of main laser beam, and ring rippled lasermore » beam in plasma using higher-order paraxial theory. These equations have been solved numerically for different laser intensities and plasma frequencies. The well established experimental laser and plasma parameters are used in numerical calculation. It is observed that the focusing of the laser beams (main and ring rippled) becomes fast in the nonparaxial region by expanding the eikonal and other relevant quantities up to the fourth power of r. The splitted profile of laser beam in the plasma is observed due to uneven focusing/defocusing of the axial and off-axial rays. The growths of ring ripple increase when the laser beam intensity increases. Furthermore, the intensity profile of ring rippled laser beam gets modified due to the contribution of growth rate.« less

The recent progress of isoxazole in medicinal chemistry.

PubMed

Zhu, Jie; Mo, Jun; Lin, Hong-Zhi; Chen, Yao; Sun, Hao-Peng

2018-05-28

Isoxazole compounds exhibit a wide spectrum of targets and broad biological activities. Developing compounds with heterocycle rings has been one of the trends. The integration of isoxazole ring can offer improved physical-chemical properties. Because of the unique profiles, isoxazole ring becomes a popular moiety in compounds design. In this review article, the major focus has been paid to the applications of isoxazole compounds in treating multiple diseases, including anticancer, antimicrobial, anti-inflammatory, etc. Strategies for compounds design for preclinical, clinical, and FDA approved drugs were discussed. Also, the emphasis has been addressed to the future perspectives and trend for the application. Copyright © 2018 Elsevier Ltd. All rights reserved.

Development of dapivirine vaginal ring for HIV prevention.

PubMed

Devlin, Bríd; Nuttall, Jeremy; Wilder, Susan; Woodsong, Cynthia; Rosenberg, Zeda

2013-12-01

In the continuing effort to develop effective HIV prevention methods for women, a vaginal ring containing the non-nucleoside reverse transcriptase inhibitor dapivirine is currently being tested in two safety and efficacy trials. This paper reviews dapivirine ring's pipeline development process, including efforts to determine safe and effective dosing levels as well as identify delivery platforms with the greatest likelihood of success for correct and consistent use. Dapivirine gel and other formulations were developed and tested in preclinical and clinical studies. Multiple vaginal ring prototypes were also tested, resulting in the current ring design as well as additional designs under consideration for future testing. Efficacy results from clinical trials are expected in 2015. Through ongoing consultations with national regulatory authorities, licensure requirements for dapivirine vaginal ring approval have been defined. This article is based on a presentation at the "Product Development Workshop 2013: HIV and Multipurpose Prevention Technologies," held in Arlington, Virginia on February 21-22, 2013. It forms part of a special supplement to Antiviral Research. Copyright © 2013 Elsevier B.V. All rights reserved.

Computer Generation of Natural Language from a Deep Conceptual Base

DTIC Science & Technology

1974-01-01

It would be useful to have machines which could read scientific documents, newspaper articles , novels, etc., and translate them into other...preparing abstracts :or articles and in headline writing (at least in those cases in which headlines are used as an indication of article content...above), a definite or indefinite article is attached to the noun phrase. The selection of color and size adjectives is made in .. fashion

KSC-2009-5387

NASA Image and Video Library

2009-09-26

VANDENBERG AIR FORCE BASE, Calif. -- At the Astrotech processing facility on Vandenberg Air Force Base in California, workers prepare a payload adapter ring for NASA's Wide-field Infrared Survey Explorer, or WISE, in preparation for mating to its Payload Attach Fitting. The satellite will survey the entire sky at infrared wavelengths, creating a cosmic clearinghouse of hundreds of millions of objects which will be catalogued and provide a vast storehouse of knowledge about the solar system, the Milky Way, and the universe. Launch is scheduled for Dec. 7. Photo credit: NASA/Doug Kolkow

Demonstration of Ice-Free Cathodic Protection Systems for Water Storage Tanks at Fort Drum: Final Report on Project AR-F-318 for FY05

DTIC Science & Technology

2007-06-01

and immovable with fingers. Body side rivet base and outside rivet burr should be flat against the material. Bent rivets will fail under stress ...such as using knots, tying around sharp edges, etc.) and maximum permitted free fall distance. Also, to be stressed are the importance of inspections...limitations; e. Application limits; f. Proper hook -up, anchoring and tie-off techniques, including the proper dee-ring or other attachment point to use on

(E)-2-Meth-oxy-9-(2-meth-oxy-9H-xanthen-9-yl-idene)-9H-xanthene.

PubMed

Tian, Xiang-Yu; Song, Qin-Hua

2013-01-01

The title compound, C28H20O4, was synthesized by a bimolecular Zn-HCl reduction in glacial acetic acid using the meth-oxy-substituted xanthone as a starting material. The crystal structure shows that the 2,2'-meth-oxy-bixanthenyl-idene unit is an E-type conformation anti-folded conformer. The mol-ecule lies on an inversion center. The meth-oxy group is almost coplanar with the attached benzene ring, with a C-O-C-C torsion angle of 179.38 (14)°.

Synthesis of Side Chain Liquid Crystal Polymers by Living Ring Opening Metathesis Polymerization. 3. Influence of Molecular Weight, Interconnecting Unit and Substituent on the Mesomorphic behavior of Polymers with Laterally Attached Mesogens

DTIC Science & Technology

1992-04-08

polymethylsiloxanes, 6 -7 polyacrylates ,2,4,5 polymethacrylates, 1 ,3 and polychloroacrylates, 5 exhibit only nematic mesophases regardless of the...corresponding carboxyl chloride. Potassium bicyclo[2.2.1]hept-2-ene-5- carboxylate was prepared by titrating a methanolic solution of the carboxylic acid...Esterification of the Corresponding Benzyl Bromides. Monomers 1I-n were prepared in 47-88% yield using the following procedure. A mixture of potassium bicyclo

Clamshell closure for metal drum

DOEpatents

Blanton, Paul S

2014-09-30

Closure ring to retain a lid in contact with a metal drum in central C-section conforming to the contact area between a lid and the rim of a drum and further having a radially inwardly directed flange and a vertically downwardly directed flange attached to the opposite ends of the C-section. The additional flanges reinforce the top of the drum by reducing deformation when the drum is dropped and maintain the lid in contact with the drum. The invention is particularly valuable in transportation and storage of fissile material.

4. Unit 4 Turbine Pit Oil Jacking Pump and Wicket ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Unit 4 Turbine Pit Oil Jacking Pump and Wicket Gate Linkages, view to the north. The jacking pump, located along the wall on the left side of photograph, is used for pumping oil to lift the thrust bearing prior to starting the unit. Note the wicket gate linkages attached to the operating ring and visible in the lower center of the photograph. - Washington Water Power Clark Fork River Cabinet Gorge Hydroelectric Development, Powerhouse, North Bank of Clark Fork River at Cabinet Gorge, Cabinet, Bonner County, ID

Synthesis of N-formyl-3,4-di-t-butoxycarbonyloxy-6(trimethylstannyl)-L-phenylalanine ethyl ester and its regioselective radiofluorodestannylation to 6-[{sup 18}F]fluoro-1-dopa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satyamurthy, N.; Barrio, J.R.; Bishop, A.J.

A process is revealed for forming a 6-fluoro derivative of compounds in the L-Dopa family comprising the steps of protecting the groups attached to the benzene ring in the compound followed by serially reacting the protected compound with (a) iodine and silver trifluoroacetic acid; (b) Bb{sub 3}; (c) dit-butyldicarbonate; (d) hexamethyltin; (e) a fluoro compound; (f) hydrobromic acid; and (g) raising the pH to {<=}7. 1 fig.

Synthesis of N-formyl-3,4-di-t-butoxycarbonyloxy-6(trimethylstannyl)-L-phenylalanine ethyl ester and its regioselective radiofluorodestannylation to 6-[{sup 18}F]fluoro-1-dopa

DOEpatents

Satyamurthy, N.; Barrio, J.R.; Bishop, A.J.; Namavari, M.; Bida, G.T.

1996-04-23

A process is revealed for forming a 6-fluoro derivative of compounds in the L-Dopa family comprising the steps of protecting the groups attached to the benzene ring in the compound followed by serially reacting the protected compound with (a) iodine and silver trifluoroacetic acid; (b) Bb{sub 3}; (c) dit-butyldicarbonate; (d) hexamethyltin; (e) a fluoro compound; (f) hydrobromic acid; and (g) raising the pH to {<=}7. 1 fig.

Synthesis of N-formyl-3,4-di-t-butoxycarbonyloxy-6-(trimethylstannyl)-L-phenylalanine ethyl ester and its regioselective radiofluorodestannylation to 6- .sup.18 F!fluoro-1-dopa

DOEpatents

Satyamurthy, Nagichettiar; Barrio, Jorge R.; Bishop, Allyson J.; Namavari, Mohammad; Bida, Gerald T.

1996-01-01

A process for forming a 6-fluoro derivative of compounds in the L-Dopa family comprising the steps of protecting the groups attached to the benzene ring in the compound followed by serially reacting the protected compound with (a) iodine and silver trifluoroacetic acid; (b) Bb.sub.3 ; (c) dit-butyldicarbonate; (d) hexamethyltin; (e) a fluoro compound; (f) hydrobromic acid; and (g) raising the pH to .ltoreq.7.

Water driven turbine/brush pipe cleaner

NASA Technical Reports Server (NTRS)

Werlink, Rudy J. (Inventor)

1995-01-01

Assemblies are disclosed for cleaning the inside walls of pipes and tubes. A first embodiment includes a small turbine with angled blades axially mounted on one end of a standoff support. An O-ring for stabilizing the assembly within the pipe is mounted in a groove within the outer ring. A replaceable circular brush is fixedly mounted on the opposite end of the standoff support and can be used for cleaning tubes and pipes of various diameters, lengths and configurations. The turbine, standoff support, and brush spin in unison relative to a hub bearing that is fixedly attached to a wire upstream of the assembly. The nonrotating wire is for retaining the assembly in tension and enabling return of the assembly to the pipe entrance. The assembly is initially placed in the pipe or tube to be cleaned. A pressurized water or solution source is provided at a required flow-rate to propel the assembly through the pipe or tube. The upstream water pressure propels and spins the turbine, standoff support and brush. The rotating brush combined with the solution cleans the inside of the pipe. The solution flows out of the other end of the pipe with the brush rotation controlled by the flow-rate. A second embodiment is similar to the first embodiment but instead includes a circular shaped brush with ring backing mounted in the groove of the exterior ring of the turbine, and also reduces the size of the standoff support or eliminates the standoff support.

Self-assembly properties of semiconducting donor-acceptor-donor bithienyl derivatives of tetrazine and thiadiazole-effect of the electron accepting central ring.

PubMed

Zapala, Joanna; Knor, Marek; Jaroch, Tomasz; Maranda-Niedbala, Agnieszka; Kurach, Ewa; Kotwica, Kamil; Nowakowski, Robert; Djurado, David; Pecaut, Jacques; Zagorska, Malgorzata; Pron, Adam

2013-11-26

Scanning tunneling microscopy was used to study the effect of the electron-accepting unit and the alkyl substituent's position on the type and extent of 2D supramolecular organization of penta-ring donor-acceptor-donor (DAD) semiconductors, consisting of either tetrazine or thiadiazole central acceptor ring symmetrically attached to two bithienyl groups. Microscopic observations of monomolecular layers on HOPG of four alkyl derivatives of the studied adsorbates indicate significant differences in their 2D organizations. Ordered monolayers of thiadiazole derivatives are relatively loose and, independent of the position of alkyl substituents, characterized by large intermolecular separation of acceptor units in the adjacent molecules located in the face-to-face configuration. The 2D supramolecular architecture in both derivatives of thiadiazole is very sensitive to the alkyl substituent's position. Significantly different behavior is observed for derivatives of tetrazine (which is a stronger electron acceptor). Stronger intermolecular DA interactions in these adsorbates generate an intermolecular shift in the monolayer, which is a dominant factor determining the 2D structural organization. As a consequence of this molecular arrangement, tetrazine groups (A segments) face thiophene rings (D segments) of the neighboring molecules. Monolayers of tetrazine derivatives are therefore much more densely packed and characterized by similar π-stacking of molecules independently of the position of alkyl substituents. Moreover, a comparative study of 3D supramolecular organization, deduced from the X-ray diffraction patterns, is also presented clearly confirming the polymorphism of the studied adsorbates.

Traumatic lesions of the posterior urethra.

PubMed

Velarde-Ramos, L; Gómez-Illanes, R; Campos-Juanatey, F; Portillo-Martín, J A

2016-11-01

The posterior urethral lesions are associated with pelvis fractures in 5-10% of cases. The posterior urethra is attached to the pelvis bone by puboprostatic ligaments and the perineal membrane, which explains why disruption of the pelvic ring can injure the urethra at this level. To identify suspected cases of posterior urethral trauma and to perform the diagnosis and its immediate or deferred management. Search in PubMed of articles related to traumatic posterior urethral lesions, written in English or Spanish. We reviewed the relevant publications including literature reviews and chapters from books related to the topic. With patients with pelvis fractures, we must always rule out posterior urethral lesions. The diagnostic examination of choice is retrograde urethrography, which, along with the severity of the condition, will determine the management in the acute phase and whether the treatment will be performed immediately or deferred. Early diagnosis and proper acute management decrease the associated complications, such as strictures, urinary incontinence and erectile dysfunction. Despite the classical association between posterior urethral lesions and pelvic fractures, the management of those lesions (whether immediate or deferred) remains controversial. Thanks to the growing interest in urethral disease, there are an increasing number of studies that help us achieve better management of these lesions. Copyright © 2016 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

Safe emergency department removal of a hardened steel penile constriction ring.

PubMed

Peay, Jeremy; Smithson, James; Nelson, James; Witucki, Peter

2009-10-01

Penile constriction devices are used for the enhancement of sexual performance. These devices have the potential to become incarcerated, leading to necrosis and amputation if not removed promptly. This article presents a step-by-step approach for the safe removal of a hardened steel penile constriction device using somewhat unorthodox tools found in a hospital. We present a case of an incarcerated hardened steel penile constriction ring that was not able to be removed with conventional techniques. We describe a novel technique using an electric grinder and laryngoscope blade. The technique described in this article is a valuable and relatively safe technique for the Emergency Physician to facilitate the timely removal of a hardened steel constriction device.

Computation of the free energy change associated with one-electron reduction of coenzyme immersed in water: a novel approach within the framework of the quantum mechanical/molecular mechanical method combined with the theory of energy representation.

PubMed

Takahashi, Hideaki; Ohno, Hajime; Kishi, Ryohei; Nakano, Masayoshi; Matubayasi, Nobuyuki

2008-11-28

The isoalloxazine ring (flavin ring) is a part of the coenzyme flavin adenine dinucleotide and acts as an active site in the oxidation of a substrate. We have computed the free energy change Deltamicro(red) associated with one-electron reduction of the flavin ring immersed in water by utilizing the quantum mechanical/molecular mechanical method combined with the theory of energy representation (QM/MM-ER method) recently developed. As a novel treatment in implementing the QM/MM-ER method, we have identified the excess charge to be attached on the flavin ring as a solute while the remaining molecules, i.e., flavin ring and surrounding water molecules, are treated as solvent species. Then, the reduction free energy can be decomposed into the contribution Deltamicro(red)(QM) due to the oxidant described quantum chemically and the free energy Deltamicro(red)(MM) due to the water molecules represented by a classical model. By the sum of these contributions, the total reduction free energy Deltamicro(red) has been given as -80.1 kcal/mol. To examine the accuracy and efficiency of this approach, we have also conducted the Deltamicro(red) calculation using the conventional scheme that Deltamicro(red) is constructed from the solvation free energies of the flavin rings at the oxidized and reduced states. The conventional scheme has been implemented with the QM/MM-ER method and the calculated Deltamicro(red) has been estimated as -81.0 kcal/mol, showing excellent agreement with the value given by the new approach. The present approach is efficient, in particular, to compute free energy change for the reaction occurring in a protein since it enables ones to circumvent the numerical problem brought about by subtracting the huge solvation free energies of the proteins in two states before and after the reduction.

Enhanced Ligand Sampling for Relative Protein–Ligand Binding Free Energy Calculations

PubMed Central

2016-01-01

Free energy calculations are used to study how strongly potential drug molecules interact with their target receptors. The accuracy of these calculations depends on the accuracy of the molecular dynamics (MD) force field as well as proper sampling of the major conformations of each molecule. However, proper sampling of ligand conformations can be difficult when there are large barriers separating the major ligand conformations. An example of this is for ligands with an asymmetrically substituted phenyl ring, where the presence of protein loops hinders the proper sampling of the different ring conformations. These ring conformations become more difficult to sample when the size of the functional groups attached to the ring increases. The Adaptive Integration Method (AIM) has been developed, which adaptively changes the alchemical coupling parameter λ during the MD simulation so that conformations sampled at one λ can aid sampling at the other λ values. The Accelerated Adaptive Integration Method (AcclAIM) builds on AIM by lowering potential barriers for specific degrees of freedom at intermediate λ values. However, these methods may not work when there are very large barriers separating the major ligand conformations. In this work, we describe a modification to AIM that improves sampling of the different ring conformations, even when there is a very large barrier between them. This method combines AIM with conformational Monte Carlo sampling, giving improved convergence of ring populations and the resulting free energy. This method, called AIM/MC, is applied to study the relative binding free energy for a pair of ligands that bind to thrombin and a different pair of ligands that bind to aspartyl protease β-APP cleaving enzyme 1 (BACE1). These protein–ligand binding free energy calculations illustrate the improvements in conformational sampling and the convergence of the free energy compared to both AIM and AcclAIM. PMID:25906170

Neuropeptide Regulation of Social Attachment: The Prairie Vole Model

PubMed Central

Tabbaa, Manal; Paedae, Brennan; Liu, Yan; Wang, Zuoxin

2016-01-01

Social attachments are ubiquitous among humans and integral to human health. Although great efforts have been made to elucidate the neural underpinnings regulating social attachments, we still know relatively little about the neuronal and neurochemical regulation of social attachments. As a laboratory animal research model, the socially monogamous prairie vole (Microtus ochrogaster) displays behaviors paralleling human social attachments and thus has provided unique insights into the neural regulation of social behaviors. Research in prairie voles has particularly highlighted the significance of neuropeptidergic regulation of social behaviors, especially of the roles of oxytocin (OT) and vasopressin (AVP). This article aims to review these findings. We begin by discussing the role of the OT and AVP systems in regulating social behaviors relevant to social attachments, and thereafter restrict our discussion to studies in prairie voles. Specifically, we discuss the role of OT and AVP in adult mate attachments, biparental care, social isolation, and social buffering as informed by studies utilizing the prairie vole model. Not only do these studies offer insight into social attachments in humans, but they also point to dysregulated mechanisms in several mental disorders. We conclude by discussing these implications for human health. PMID:28135000

26 CFR 48.4161(a)-3 - Parts and accessories.

Code of Federal Regulations, 2010 CFR

2010-04-01

... improve the performance or appearnace of the articles, the separate sale of the parts accessories to the... section 4161(a) and § 48.4161(a)-1 that are sold on or in connection with such articles, or with the sale thereof, at the same rate applicable to the sale of the basic articles. The tax attaches in such cases...

26 CFR 48.4161(a)-3 - Parts and accessories.

Code of Federal Regulations, 2011 CFR

2011-04-01

... improve the performance or appearnace of the articles, the separate sale of the parts accessories to the... section 4161(a) and § 48.4161(a)-1 that are sold on or in connection with such articles, or with the sale thereof, at the same rate applicable to the sale of the basic articles. The tax attaches in such cases...

The work motivations of mothers with preschool children.

PubMed

Cotton, S; Antill, J K; Cunningham, J D

1989-06-01

This article provides a qualitative and quantitative analysis of the motivations for employment among a sample of 166 Sydney mothers, each of whom had at least 1 preschool-aged child. Mothers with high and moderate work attachment indicated a multiplicity of motives, of both an extrinsic (financial) and intrinsic (personal satisfaction, sense of achievement) nature. In contrast, the majority of women with low work attachment cited extreme financial need as the only possible reason that would impel them to enter the labor force. When asked which was, or would be, their most important reason for working, women with high work attachment endorsed more nonfinancial than financial reasons, women with moderate work attachment were about equally likely to give either reason, and women with low work attachment predominantly gave financial reasons. Husbands' perceptions of the reasons their wives were working, or would work, showed some, but not complete, agreement with those of their wives.

An exploration of family dynamics and attachment strategies in a family with ADHD/conduct problems.

PubMed

Dallos, Rudi; Smart, Cordet

2011-10-01

This article reports the preliminary findings of a study of attachment patterns and relationship themes using the TAAI (Transition to Adulthood Attachment Interview), AAI (Adult Attachment Interview) and family interviews (based on the first of 15 families). Research data is presented on a young man aged 16 with a diagnosis of ADHD and his family. Individual interviews, attachment interviews, and family interviews were conducted in order to explore the link between family dynamics, ADHD and attachment strategies. In contrast to findings from existing research indicating pre-occupied patterns for young people diagnosed with ADHD, the young man displayed a complex 'disoriented' attachment pattern which primarily featured a dismissive strategy. However, this was combined with pre-occupied patterns triggered by intrusions from unresolved traumas and memories of his parents' continuing unresolved conflicts. His sense of confusion and lack of a coherent strategy appeared to be closely related to his position of being triangulated into his parents' conflicts. Trans-generational processes were also influential, in that the parents' corrective intentions at more positive parenting were impeded by their own lack of experience of positive attachments in their own childhoods. The study emphasizes the need to consider the relationship between attachment patterns and problems within wider systemic process in the family, in particular triangulation and corrective scripts.

Measuring infant attachment security in rhesus macaques (Macaca mulatta): adaptation of the attachment Q-set.

PubMed

Warfield, James J; Kondo-Ikemura, Kiyomi; Waters, Everett

2011-02-01

John Bowlby defined offspring-parent attachment as a relationship in which an infant or child uses one or a few preferred adults as a secure base from which to explore and as a haven of safety. He defined attachment security in terms of confidence in the adult's availability and responsiveness and the smooth organization of exploration and proximity seeking. Developmental psychologists have found this perspective productive in both observational and laboratory research. At the same time, they emphasize that such a construct cannot be operationalized in terms of one or a few behaviors. Instead, naturalistic observations of human infant attachment typically employ the Q-sort method to develop the Attachment q-set (AQS), 90 behaviorally descriptive items sorted in terms of how characteristic each item is of the infant's typical behavior. Meta-analyses of research using the AQS attest to its reliability and validity. This article reports an adaptation of the AQS to the task of assessing infant attachment security in nonhuman primates and illustrates its use. The availability of comparable measures of attachment security will contribute to an expanded understanding of patterns of attachment behavior in nonhuman primate societies and will facilitate interaction between comparative and developmental psychologists. © 2010 Wiley-Liss, Inc.

Annular pancreas

MedlinePlus

... page: //medlineplus.gov/ency/article/001142.htm Annular pancreas To use the sharing features on this page, please enable JavaScript. An annular pancreas is a ring of pancreatic tissue that encircles ...

On Shaft Data Acquisition System (OSDAS)

NASA Technical Reports Server (NTRS)

Pedings, Marc; DeHart, Shawn; Formby, Jason; Naumann, Charles

2012-01-01

On Shaft Data Acquisition System (OSDAS) is a rugged, compact, multiple-channel data acquisition computer system that is designed to record data from instrumentation while operating under extreme rotational centrifugal or gravitational acceleration forces. This system, which was developed for the Heritage Fuel Air Turbine Test (HFATT) program, addresses the problem of recording multiple channels of high-sample-rate data on most any rotating test article by mounting the entire acquisition computer onboard with the turbine test article. With the limited availability of slip ring wires for power and communication, OSDAS utilizes its own resources to provide independent power and amplification for each instrument. Since OSDAS utilizes standard PC technology as well as shared code interfaces with the next-generation, real-time health monitoring system (SPARTAA Scalable Parallel Architecture for Real Time Analysis and Acquisition), this system could be expanded beyond its current capabilities, such as providing advanced health monitoring capabilities for the test article. High-conductor-count slip rings are expensive to purchase and maintain, yet only provide a limited number of conductors for routing instrumentation off the article and to a stationary data acquisition system. In addition to being limited to a small number of instruments, slip rings are prone to wear quickly, and introduce noise and other undesirable characteristics to the signal data. This led to the development of a system capable of recording high-density instrumentation, at high sample rates, on the test article itself, all while under extreme rotational stress. OSDAS is a fully functional PC-based system with 48 channels of 24-bit, high-sample-rate input channels, phase synchronized, with an onboard storage capacity of over 1/2-terabyte of solid-state storage. This recording system takes a novel approach to the problem of recording multiple channels of instrumentation, integrated with the test article itself, packaged in a compact/rugged form factor, consuming limited power, all while rotating at high turbine speeds.

Rho1- and Pkc1-dependent phosphorylation of the F-BAR protein Syp1 contributes to septin ring assembly.

PubMed

Merlini, Laura; Bolognesi, Alessio; Juanes, Maria Angeles; Vandermoere, Franck; Courtellemont, Thibault; Pascolutti, Roberta; Séveno, Martial; Barral, Yves; Piatti, Simonetta

2015-09-15

In many cell types, septins assemble into filaments and rings at the neck of cellular appendages and/or at the cleavage furrow to help compartmentalize the plasma membrane and support cytokinesis. How septin ring assembly is coordinated with membrane remodeling and controlled by mechanical stress at these sites is unclear. Through a genetic screen, we uncovered an unanticipated link between the conserved Rho1 GTPase and its effector protein kinase C (Pkc1) with septin ring stability in yeast. Both Rho1 and Pkc1 stabilize the septin ring, at least partly through phosphorylation of the membrane-associated F-BAR protein Syp1, which colocalizes asymmetrically with the septin ring at the bud neck. Syp1 is displaced from the bud neck upon Pkc1-dependent phosphorylation at two serines, thereby affecting the rigidity of the new-forming septin ring. We propose that Rho1 and Pkc1 coordinate septin ring assembly with membrane and cell wall remodeling partly by controlling Syp1 residence at the bud neck. © 2015 Merlini et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eriksson, Mikael

Not very long ago, the 3{sup rd} generation storage ring technology was judged as mature. Most of the 3{sup rd} generation storage rings used the Double-Bend Achromat (DBA) or Triple-Bend Achromat (TBA) concepts. It was however a well-known fact that increasing the number of magnet cells in the rings is a powerful way of decreasing the electron beam emittance and thus the source brilliance, but at the penalty of increasing the size and cost of the rings. Preserving the Dynamic Aperture (DA) in the rings became also an issue when increasing the number of magnet cells. The Multi-Bend Achromat (MBA)more » concept, including a miniaturization of the ring elements, has now drastically changed the picture. The MBA rings, now in construction or being planned, offer orders of magnitudes higher brilliance than rings of conventional designs. Several light sources around the world are now implementing or planning to implement this MBA concept. This article touches on the science drivers for higher brilliance. We will then describe the MBA concept with its advantages as well as its challenges. A short survey of the MBA activity around the world will also be presented. The author apologies for focusing on the MAX IV project regarding technical solutions. This is motivated by that MAX IV is the facility he knows best and it might be regarded as a fore-runner for the MBA concept.« less

Foucault pendulum with eddy-current damping of the elliptical motion

NASA Astrophysics Data System (ADS)

Mastner, G.; Vokurka, V.; Maschek, M.; Vogt, E.; Kaufmann, H. P.

1984-10-01

A newly designed Foucault pendulum is described in which the mechanical Charron ring, used throughout in previous designs for damping of the elliptical motion of the pendulum, is replaced by an electromagnetic eddy-current brake, consisting of a permanent magnet attached to the bottom of the bob and a metallic ring. This damping device is very efficient, as it is self-aligning, symmetrical in the damping effect, and never wears out. The permanent magnet is also used, together with a coil assembly and an electronic circuitry, for the dipole-torque drive of the pendulum as well as for accurate stabilization of the amplitude of the swing. A latched time display, controlled by Hall probes activated by the magnet, is used to visualize the Foucault rotation. The pendulum system and its associated electronic circuitry are described in detail. The optimizing of the drive mode is discussed. Measurements of deviations from theoretical value of the Foucault rotation velocity made automatically in a continuous run show a reproducible accuracy of ±1% or better in individual 360° rotations during the summer months. The quality factor of the pendulum as mechanical resonator was measured as a function of the amplitude in the presence of the eddy-current damping ring.

Gross anatomy of the ringed seal (Pusa hispida) gastro-intestinal tract.

PubMed

Smodlaka, H; Henry, R W

2014-06-01

The gross anatomical structure of the ringed seal (Pusa hispida) gastrointestinal tract is poorly described and often veterinary anatomical terminology is not used. Although the basic abdominal visceral pattern corresponded to domestic carnivores, significant differences were noted. The stomach was an elongated sharply bent tube (u-shaped) with the pylorus and fundus juxtaposed. The elongated jejunum measured up to 15.6 times body length and had 37 jejunal arteries from the cranial mesenteric artery. The pancreas was asymmetrical with a small right lobe and a large left lobe. The unusually short greater omentum negated formation of deep and superficial leaves. The most remarkable difference was the separation of the liver parenchyma into three physically separate masses, held together by hepatic ducts, veins and arteries. The topography and position of the liver was dependent on the amount of blood in the hepatic sinus (distended hepatic veins and hepatic portion of vena cava). Thus, as the hepatic sinus filled, the lateral liver masses separate from the central mass by moving caudolaterally. This was facilitated by modified coronary and triangular ligaments which did not attach directly to the liver, but instead to the hepatic sinus. These anatomical adaptations are apparently advantageous to ringed seal's survival in a deep marine environment. © 2013 Blackwell Verlag GmbH.

Temperature Measurement Aid

NASA Technical Reports Server (NTRS)

1979-01-01

NASA's Ames Research Center has designed a simple but medically important device--one which holds temperature probes, called thermistors, to a person's skin without affecting the characteristics of the skin segment being measured. The device improves the accuracy of skin surface temperature measurements, valuable data in health evaluation. The need for such a device was recognized in the course of life science experiments at Ames. In earlier methods, the sensing head of the temperature probe was affixed to the patient's skin by tape or elastic bands. This created a heat variance which altered skin temperature readings. The Ames-developed thermistor holder is a plastic ring with tab extensions, shown in the upper photo on the chest, arm and leg of the patient undergoing examination. The ring holds the sensing head of the temperature probe and provides firm, constant pressure between the skin and the probe. The tabs help stabilize the ring and provide attachment points for the fastening tape or bands, which do not directly touch the sensor. With this new tool, it is possible to determine more accurately the physiological effects of strenuous exercise, particularly on the treadmill. The holder is commercially available from Yellow Springs Instrument Company, Inc., Yellow Springs, Ohio, which is producing the device under a NASA patent license.

Unraveling the Pore-Forming Steps of Pneumolysin from Streptococcus pneumoniae.

PubMed

van Pee, Katharina; Mulvihill, Estefania; Müller, Daniel J; Yildiz, Özkan

2016-12-14

Pneumolysin (PLY) is the main virulence factor of Streptococcus pneumoniae that causes pneumonia, meningitis, and invasive pneumococcal infection. PLY is produced as monomers, which bind to cholesterol-containing membranes, where they oligomerize into large pores. To investigate the pore-forming mechanism, we determined the crystal structure of PLY at 2.4 Å and used it to design mutants on the surface of monomers. Electron microscopy of liposomes incubated with PLY mutants revealed that several mutations interfered with ring formation. Mutants that formed incomplete rings or linear arrays had strongly reduced hemolytic activity. By high-resolution time-lapse atomic force microscopy of wild-type PLY, we observed two different ring-shaped complexes. Most of the complexes protruded ∼8 nm above the membrane surface, while a smaller number protruded ∼11 nm or more. The lower complexes were identified as pores or prepores by the presence or absence of a lipid bilayer in their center. The taller complexes were side-by-side assemblies of monomers of soluble PLY that represent an early form of the prepore. Our observations suggest a four-step mechanism of membrane attachment and pore formation by PLY, which is discussed in the context of recent structural models. The functional separation of these steps is necessary for the understanding how cholesterol-dependent cytolysins form pores and lyse cells.