Sample records for assembly line worker
-
Amano, M; Umeda, G; Nakajima, H; Yatsuki, K
1988-01-01
The characteristic work actions of female shoe manufacturing assembly line workers were analyzed by the records of 8-mm cine-films. The relationship between cervicobrachial disorders and work actions was investigated as a cross-sectional factor control study by using sex-age matched pairs for non-assembly line workers (102 pairs). The following conclusions were obtained: 1) The assembly line workers handled about 3,400 sneaker shoes per day on the assembly line. A completed shoe weighed 200-500 g. The metal last weighted 400-1,200 g. As the lines were not completely mechanized, the workers passed shoes to the next worker by hand. 2) In the line selected for the study of work actions, 28 female workers and one male worker were engaged. The work direction of the line was one-way (from left to right or vice versa). The actions of the workers were classified into four fundamental actions: i) grasping the shoe or tool, ii) extending or iii) bending of the arms, and iv) keeping the arms in a certain position. These fundamental actions were repeated more than 3,400 times per day by each worker. The time spent in holding a shoe in the left hand was longer than that of the right hand in holding a shoe or tool. 3) Results of medical examinations showed a higher prevalence in assembly line workers than that in non-assembly line workers. Especially the prevalence rate of tapping test, pain sensibility test, vibratory sensibility test, Morley's test, tenosynovitis in the fingers, tenderness at spinal muscle around the thoracic vertebrae, levator muscle of scapula, trapezius muscle, rhomboid muscle, infraspinatus muscle, greater pectoral muscle, anterior scalene muscle, thenar eminence, biceps muscle of arm, brachioradial muscle, and antebrachial flexor muscle were found to be different significantly by McNemar's test between the two groups. These disorders were appeared in the left shoulder, arm and hand. 4) As the non-assembly line workers were not engaged in compulsory work or in one-way work direction, they injured the right side (skillful side). On the contrary, it is considered that compulsory transfer of shoes and one-way work direction imposes a heavier load on the left side of the body in assembly line workers, and consequently they injured the left side more severely. 5) It is concluded that the sustained task of handing over shoes to the next worker or one-way work direction caused cervicobrachial disorders of assembly line workers, especially on the left side of the body.
-
Boredom on the Assembly Line: Age and Personality Variables
ERIC Educational Resources Information Center
Stagner, Ross
1975-01-01
Research shows wide differences in the way individuals react to paced, constrained jobs. Workers show increasing job satisfaction with age, but there are few older workers among assembly line operatives; perhaps they leave because of seniority, job change, or retirement. Aging, however, may make personalities more compatible with assembly line…
-
Byström, S; Hall, C; Welander, T; Kilbom, A
1995-12-01
The prevalence of forearm and hand disorders was examined by questionnaire and clinical examination in 199 automobile assembly line workers and in 186 controls. The pressure-pain threshold, hand grip force and hand anthropometry were also studied. There was an increased prevalence of de Quervain's disease for male automobile assembly line workers, and of carpal tunnel syndrome in female workers. The prevalence of symptoms in the forearm and hand during the last 7 days were twice as high among automobile assembly line workers than controls for both men and women. The occurrence of symptoms in the last 7 days was associated with de Quervain's disease, carpal tunnel syndrome and sick-leave due to forearm or hand problems, and it also influenced activities of daily living. Hand grip strength and anthropometrics were not associated with findings in the clinical examination or the occurrence of symptoms in the last 7 days. Low pressure-pain threshold was not associated with findings in the clinical examination, except for reported occurrence of symptoms in the last 7 days for women. Pressure-pain threshold as an indicator of tissue damage is discussed.
-
Nimble Fingers. From 19th Century New England Mills to 20th Century Global Assembly Lines.
ERIC Educational Resources Information Center
Reese, Lyn
1988-01-01
Covers women's labor history in the United States and in industrialized nations from the early 1800s to the present. Provides primary source documents from New England workers in the 1830s and 1840s and from women workers on global assembly lines in the 1980s. Includes discussion questions. (LS)
-
Ji, Y Q; Li, S; Wang, C; Wang, J; Liu, X M
2016-10-20
Objective: To investigate occupational stress in assembly line workers in electronics manu-facturing service (EMS) and related influencing factors. Methods: From June to October, 2015, a cross-sectional survey was performed for 5 944 assembly line workers in EMS (observation group) and 6 270 workers from other posts (non-assembly line workers and management personnel; control group) using the self-made questionnaire for basic information, job demand-control (JDC) model questionnaire, and effort-reward imbalance (ERI) model questionnaire to collect respondents' basic information and occupational stress. Results: The observation group had significantly lower work autonomy, social support, and work reward scores than the control group (2.72 ± 0.63/3.64 ± 0.68/4.06 ± 0.80 vs 3.00 ± 0.67/3.83 ± 0.68/4.24 ± 0.75, t =23.53, 15.41, and 12.70, all P <0.05) , as well as significantly higher work effort and job involvement scores than the control group (2.34±0.78/2.48±0.78 vs 2.21±0.80/2.33±0.77, t =-9.08 and-10.90, both P <0.05). The observation group had significantly higher proportions of workers with occupational stress determined by JDC and ERI models than the control group (64.5%/12.7% vs 52.6%/9.9%, χ 2 =182.26 and 23.41, both P <0.05). Female sex, migrant workers, working time >60 hours/week, and sleeping time <7 hours/day were major risk factors for occupational stress in JDC model; education background of Bachelor's degree or above, working time >60 hours/week, and sleeping time<7 hours/day were major risk factors for occupational stress in ERI model, while female sex and a high monthly income reduced the risk of occupational stress in ERI model. Conclusion: Assembly line workers in EMS are a relatively vulnerable group and have a high degree of occupational stress. Working time >60 hours/week and sleeping time <7 hours/day are major risk factors for occupational stress.
-
Keyserling, W Monroe; Wiggermann, Neal; Werner, Robert A; Gell, Nancy
2010-05-01
This study evaluated inter-worker variability in lower body posture and work activity during highly-structured assembly line work. Data were collected from 79 unique assembly line workstations in an engine manufacturing plant. Because the plant utilized work teams, 4-8 workers rotated through each workstation. At least 30 min of videotape was collected from at least three workers at each workstation. A computer-assisted work sampling procedure randomly selected 200 video "freeze-frames" for each worker. Lower body posture/movement (e.g., sit, stand, walk, etc.) was determined for each frame and used to estimate the percentage of time the worker spent in various postures and activities. Chi-square analyses were performed for each workstation to assess the significance of inter-worker differences. Due to variations in individual work methods, significant differences (p <.05) were found at 57 out of 79 workstations (72%). The greatest differences occurred when workers had the option to choose between standing and sitting (significant in 8 of 8 cases; in extreme examples, sit time ranged between 0-100% on one job, and 6.5-98% on another). Studying a single worker (or "proxy") can contribute to substantial error when estimating exposures in workplace studies of ergonomic stressors, since the proxy may not be representative of all workers who perform the job. Individual measurements are preferable, particularly for jobs where workers have substantial latitude to develop individualized work methods.
-
[Occupational stress of assembly line female workers in confectionery work].
Kondo, Y; Sato, Y; Takashima, H; Siki, T; Inui, S; Arachi, H; Yamashita, N; Hosokawa, M
1985-09-01
Concomitant with frequent occurrence of disorders of the neck, arm, hand and low back among assembly-line female workers in confectionery work, there is an increased number of patients with occupational cervicobrachial disorders and/or low back pain. In suspicion of the close correlation between the working conditions and development of these local disorders, a field study was undertaken. The following are the results obtained. More than 90% of these assembly-line female workers consisted of inexperienced part-time employees, mostly of middle to old age. They were engaged in decorating conveyor-carried cakes with cream and chocolate. The work necessitated repetitive movements of the upper limbs and concentration of visuosensory and nervous attention in a half-sitting slouching posture. This was considered to exert excess load on the local muscles and nervous and sensory systems. The causes that intensified the local symptoms as pointed out by the workers consisted of (1) repetitive use of the arms and hands, (2) static posture during the work and (3) sustained standing position. Complaints of low back pain were conspicuous from the unsuitable height of a conveyor-belt. Thirty five percent of the female workers needed medical treatment for cervicobrachial and/or low back pain. The forced adaptation to the belt height, sustained unnatural working posture and the imposition of forced movements seemed to be the main factors in the onset of cervicobrachial and/or low back pain in interrelation with working hours. On the basis of these results, the work load on a machine-paced assembly-line was analyzed and the necessity of improvement of working conditions was discussed.
-
Ergonomic risk factors of work processes in the semiconductor industry in Peninsular Malaysia.
Chee, Heng-Leng; Rampal, Krishna Gopal; Chandrasakaran, Abherhame
2004-07-01
A cross-sectional survey of semiconductor factories was conducted to identify the ergonomic risk factors in the work processes, the prevalence of body pain among workers, and the relationship between body pain and work processes. A total of 906 women semiconductor workers took part in the study. In wafer preparation and polishing, a combination of lifting weights and prolonged standing might have led to high pain prevalences in the low back (35.0% wafer preparation, 41.7% wafer polishing) and lower limbs (90.0% wafer preparation, 66.7% wafer polishing). Semiconductor front of line workers, who mostly walked around to operate machines in clean rooms, had the lowest prevalences of body pain. Semiconductor assembly middle of line workers, especially the molding workers, who did frequent lifting, had high pain prevalences in the neck/shoulders (54.8%) and upper back (43.5 %). In the semiconductor assembly end of line work section, chip inspection workers who were exposed to prolonged sitting without back support had high prevalences of neck/shoulder (62.2%) and upper back pain (50.0%), while chip testing workers who had to climb steps to load units had a high prevalence of lower limb pain (68.0%). Workers in the assembly of electronic components, carrying out repetitive tasks with hands and fingers, and standing in awkward postures had high pain prevalences in the neck/shoulders (61.5%), arms (38.5%), and hands/wrists (30.8%).
-
Yokota, K; Johyama, Y; Yamaguchi, K; Takeshita, T; Morimoto, K
1999-01-01
To examine exposure-response relationships in the occurrence of symptoms of the eyes and airways in workers exposed to methyltetrahydrophthalic anhydride (MTHPA). A population of 111 workers from 2 condenser plants (A and B) using epoxy resin with MTHPA underwent a questionnaire survey and serology investigations, and data obtained on 95 subjects in assembly and inspection lines were analyzed for this study. In all, 24 (65%) of 37 workers in plant A and 38 (66%) of 58 workers in plant B had positive MTHPA-specific IgE. The air levels of MTHPA detected in assembly and inspection lines were higher in plant A than in plant B (geometric mean 25.5-63.9 and 4.93-5.49 microg/m3, respectively). IgE-sensitized workers in each plant had significantly (P < 0.05) more complaints regarding the eyes and nose than did unsensitized workers, suggesting that there is an IgE-mediated mechanism in most of these symptoms. The sensitized workers in plant A had higher frequencies for symptoms of the eyes, nose, and pharynx than did those in plant B (P < 0.02). Furthermore, only 15% of persons often displayed work-related symptoms among the 20 symptomatic workers in plant B as compared with 73% of the 26 symptomatic workers in plant A (P < 0.0001). These results can be explained by the difference in the MTHPA levels measured in the lines between the two plants. In plant B the minimal level of MTHPA that was associated with work-related symptoms was 15-22 microg/m3, which was lower than the geometric mean levels detected in assembly and inspection lines in plant A. These results suggest that MTHPA exposure at levels above 15 microg/m3 should be avoided to prevent the development of occupational allergic diseases in most workers.
-
Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph
2012-01-01
Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.
-
Application of a mathematical model for ergonomics in lean manufacturing.
Botti, Lucia; Mora, Cristina; Regattieri, Alberto
2017-10-01
The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.
-
Field study of age-differentiated strain for assembly line workers in the automotive industry.
Börner, Kerstin; Scherf, Christian; Leitner-Mai, Bianca; Spanner-Ulmer, Birgit
2012-01-01
A field study in an automotive supply industry company was conducted to explore age-differentiated strain of assembly line workers. Subjective and objective data from 23 female workers aged between 27 and 57 years were collected at the workplace belt buckle assembly during morning shifts. Subjects with medication or chronic diseases affecting heart rate and breath rate were excluded. For subjective data generation different questionnaires were used. Before the Work Ability Index and the Munich Chronotype Questionnaire were completed by the subjects. Short questionnaires (strain-ratings, NASA-TLX) directly at begin and end of the work were used for obtaining shift-related data. During the whole shift (6 a.m. - 2.45 p.m.) bodily functions were logged with a wireless chest strap. In addition, the motion of the hand-arm-system was recorded for 30 times, 3 minutes each after a fixed time-schedule. First results show that younger subjects need significant less time for assembly (mean = 14.940 s) compared to older subjects (mean = 17.040 s; t(472.026) = -9.278 , p < 0.01).
-
Kobrosly, R W; Meliker, J R; Nriagu, J O
2009-10-01
To determine whether employees in the automobile industry in Michigan are at elevated risk of urinary bladder cancer. The authors conducted a population-based case-control study including 418 cases and 571 controls. History of employment within the automobile industry was coded according to the US Census Bureau Index of Occupations. Logistic regression analyses were adjusted for age at interview, cigarette smoking status, and highest education level, and used to assess associations between bladder cancer and (1) ever working in particular occupations within the automobile industry; and (2) usual occupation - defined as occupation of longest duration for each subject. Ever having worked in the automobile industry and usual employment within the industry exhibited elevated non-significant risks for bladder cancer among assembly line workers, painters and foremen. A higher risk was seen for those who worked for 20 or more years on the assembly line (OR = 2.10, 95% CI 1.15 to 3.80). Statistical interaction between usual employment on the assembly line and smoking status (>5 pack-years) was demonstrated (OR = 6.19, 95% CI 2.69 to 14.24). Among workers on the assembly line for at least 20 years, we observed an approximately twofold risk for bladder cancer. Heavy smokers working on the assembly line experience a sixfold risk for bladder cancer. Further research is necessary to verify this finding, identify the exposures that might be contributing to bladder cancer on the assembly line, and examine whether those exposures continue to persist in today's workplace.
-
SUNDRAM, Bala Murali; DAHLUI, Maznah; CHINNA, Karuthan
2014-01-01
Abstract Background The aim of this study was to evaluate the effectiveness of individual-focused stress management training namely Deep Breathing Exercise (DBE) on self-perceived occupational stress among male automotive assembly-line workers. Methods A quasi-experimental study was conducted at 2 automotive assembly plants in Malaysia over 9 months, from January 2012 to September 2012. Assembly-line workers from Plant A received DBE training while Plant B acted as a control by receiving pamphlets on stress and its ill-effects. Intention-to-treat analysis was conducted among the self-voluntary respondents in Plant A (n=468) and Plant B (n=293). The level of stress was measured using Depression Anxiety Stress Scales-21 (DASS-21) stress subscale. Results Significant favorable intervention effects were found in Plant A (Effect size=0.6) as compared to Plant B (Effect size=0.2) at the end of the study in those receiving DBE. Time and group interaction effects were examined using the repeated measure ANOVA test in which there was a significant group *time interaction effect [F (1, 1) = 272.45, P<0.001]. Conclusion The improvement in stress levels showed the potential of DBE training as part of Employee Assistance Program in the automotive assembly plant. Future studies should be carried out to assess the long term effects of an on-site relaxation training to provide stronger evidence for the introduction of DBE among assembly-line workers as a coping strategy to alleviate occupational stress. PMID:25988085
-
Landsbergis, Paul A; Janevic, Teresa; Rothenberg, Laura; Adamu, Mohammed T; Johnson, Sylvia; Mirer, Franklin E
2013-07-01
We examined the association between long work hours, assembly line work and stress-related diseases utilizing objective health and employment data from an employer's administrative databases. A North American automobile manufacturing company provided data for claims for sickness, accident and disability insurance (work absence of at least 4 days) for cardiovascular disease (CVD), hypertension and psychological disorders, employee demographics, and facility hours worked per year for 1996-2001. Age-adjusted claim rates and age-adjusted rate ratios were calculated using Poisson regression, except for comparisons between production and skilled trades workers owing to lack of age denominator data by job category. Associations between overtime hours and claim rates by facility were examined by Poisson regression and multi-level Poisson regression. Claims for hypertension, coronary heart disease, CVD, and psychological disorders were associated with facility overtime hours. We estimate that a facility with 10 more overtime hours per week than another facility would have 4.36 more claims for psychological disorders, 2.33 more claims for CVD, and 3.29 more claims for hypertension per 1,000 employees per year. Assembly plants had the highest rates of claims for most conditions. Production workers tended to have higher rates of claims than skilled trades workers. Data from an auto manufacturer's administrative databases suggest that autoworkers working long hours, and assembly-line workers relative to skilled trades workers or workers in non-assembly facilities, have a higher risk of hypertension, CVD, and psychological disorders. Occupational disease surveillance and disease prevention programs need to fully utilize such administrative data. Copyright © 2013 Wiley Periodicals, Inc.
-
[Relationship between performance rating and risk of low back pain in manufacturing line workers].
Higuchi, Yoshiyuki; Funahashi, Atsushi; Izumi, Hiroyuki; Kumashinro, Masaharu
2012-03-01
It is possible that the performance rating of line workers is affected by the risk factors for musculoskeletal disorders that are included in their work more so than by the actual takt time. To investigate whether performance rating relates to the risk factors for musculoskeletal disorders, we analyzed a dataset obtained from a self-administered questionnaire answered by assembly line workers (n=1579). As a result, performance rating had a significant association with unsuitable work environments, poor working postures and handling of heavy loads. The workers who reported the fastest rating had a higher exposure than others to the risk factors for occupational low back pain. The results of our study support the effectiveness of performance rating as an index of work burden.
-
People Considerations in Word Processing.
ERIC Educational Resources Information Center
Diamond, Marion L.
1984-01-01
Business educators preparing students for jobs in business and industry should become aware of the problems faced by workers in a typical large office environment. Word processor operators face many of the same problems as factory assembly line workers--lack of personalization, lack of incentive, and removal from the mainstream. (JOW)
-
ERIC Educational Resources Information Center
Participatory Research Group, Toronto (Ontario).
An international consultation was attended by 40 women workers, educators, and organizers who work directly with women affected by the new "global assembly line" that has developed as a part of the microchip technology industry. The women, who represented 12 countries, shared information and organizing experiences and worked to…
-
Yoon, Sang-Young; Ko, Jeonghan; Jung, Myung-Chul
2016-07-01
The aim of study is to suggest a job rotation schedule by developing a mathematical model in order to reduce cumulative workload from the successive use of the same body region. Workload assessment using rapid entire body assessment (REBA) was performed for the model in three automotive assembly lines of chassis, trim, and finishing to identify which body part exposed to relatively high workloads at workstations. The workloads were incorporated to the model to develop a job rotation schedule. The proposed schedules prevent the exposure to high workloads successively on the same body region and minimized between-worker variance in cumulative daily workload. Whereas some of workers were successively assigned to high workload workstation under no job rotation and serial job rotation. This model would help to reduce the potential for work-related musculoskeletal disorders (WMSDs) without additional cost for engineering work, although it may need more computational time and relative complex job rotation sequences. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.
-
Iritani, T; Koide, I; Sugimoto, Y
1997-04-01
This paper reports on a strategy to improve and renovate assembly lines, including countermeasures to prevent low back pain during the past two decades at Toyota Motor Co. Since 1975, there have been problems with low back pain at Toyota's vehicle assembly lines. To deal with these low back pain problems, it was necessary to determine their causes and to quantitatively evaluate the burden on workers. For this purpose, functional burden indexes were developed, that is, a posture burden point and a weight burden point were determined to assess the load on the low back, and a low extremity point and a squatting posture point were determined to assess the burden on the leg. The functional burden index, however, could be applied only to specific human functions, not to human functions in general. Since there are about 400 kinds of working patterns in vehicle assembly lines, comprehensive burden index was required to estimate overall burden of such work. Thus, we developed Toyota's Verification of Assembly Line (TVAL), an index for assessing the physiological stress of an assembly line work, in which an equivalent bicycle ergometer workload is calculated from electromyograms taken of 20 different muscles under actual working conditions. At present, TVAL is used to measure physiological burden of assembly work in order to give priority to improvements, and to objectively demonstrate the effects of such improvements at Toyota.
-
Epidemiology of Skin Disease in an Automobile Factory*
Newhouse, Muriel L.
1964-01-01
A survey was made of a random sample of workers from the machine shops, assembly lines, and stock and store departments of an automobile factory. Among the 1,223 men seen, representing 97% of the sample, the prevalence of non-infective skin diseases was 14·5%. Skin diseases were classified into four groups: `dermatitis' and `folliculitis' of occupational origin, endogenous `eczemas', and miscellaneous skin diseases. Slightly more than half of all the skin diseases seen were considered to be occupational in origin. In this population the prevalence of skin disease was more than four times that based on patients attending the factory medical department. An unsuspected cause of allergic dermatitis was found on the assembly lines, where the incidence of dermatitis was significantly higher than among the non-production workers. The prevalence of folliculitis was significantly higher among production than non-production workers. There was no significant difference in the prevalence of `eczema' or the miscellaneous skin diseases in the various occupational groups. Among European workers fair men were more prone to skin disease than darker men. In another factory, a West Indian and Asiatic group of workers had a significantly lower prevalence of skin diseases than a group of Europeans doing similar work. Folliculitis was more prevalent among the younger workers and those recently employed in the factory; there was no obvious association between age and length of service and the occurrence of other types of skin disease. PMID:14249898
-
STS-113 workers work on oxygen leak in Endeavor's mid-body
NASA Technical Reports Server (NTRS)
2002-01-01
KENNEDY SPACE CENTER, FLA. -- Workers on Launch Pad 39A perform checks on Endeavour?s oxygen flex hose fitting through manual inspection and using helium detectors. Visual inspection found a deformity in the flex line braid where it connects to rigid tubing. The entire flex hose assembly and bulkhead fitting were removed early today, and work is under way to complete the installation of a replacement.
-
ERIC Educational Resources Information Center
Abelev, Melissa; Vincent, M. Bess; Haney, Timothy J.
2008-01-01
One of the important misconceptions in the American view of poverty is that people are poor because they do not work. This article presents an exercise, the "bottom line," which helps dispel students' misconceptions about the working poor. Through extensive primary-data collection and assembling a budget for low-skilled workers, the exercise: (1)…
-
ERIC Educational Resources Information Center
Breinin, Charles M.
1992-01-01
Schools are operated at two levels: practicing teachers and administrators and nonteaching educationists. U.S. Education Secretary Lamar Alexander has no real relationship with teachers (school assembly-line workers) or parents more concerned about sex education, ethnic representation, and library contents than "world class" standards.…
-
Medical findings in nickel-cadmium battery workers.
Bar-Sela, S; Levy, M; Westin, J B; Laster, R; Richter, E D
1992-01-01
Thirty-eight workers from a factory producing nickel-cadmium and other types of batteries came to us for medical evaluation. They included 21 women and 17 men (seniority 2-20 years, age range 31-63 years), and represented a self-selected subset of 700-900 ever-employed and 200+ recently or currently employed workers in the factory. Thirty-four worked on the nickel-cadmium assembly line. Symptoms and signs included: headache in 34; weakness, fatigue and lassitude in 26; dizziness in 16; pruritus and skin eruptions in 37; gingivitis, teeth loss and caries in 34; nasal congestion, nosebleeds and anosmia in 30; cough, phlegm production, wheezing and shortness of breath in 26; "asthma" in 14; bone pain in 18; urinary frequency, beta 2 microglobulinuria and kidney stones in 17; and sterility or multiple abortions (33) in 8 of 21 women. One additional patient had died from an "amyotrophic lateral sclerosis-like syndrome", while CT scans in six workers revealed brain atrophy. One other worker had leukemia, and two had died from cancer (lung and pancreas). Those who had worked for more than 10 years had more symptoms and signs than shorter-term employees, especially neurological illness, bone pain and urinary tract problems, including beta 2 microglobulinuria. Past blood and urinary cadmium levels were in the range of 1.6-8.7 micrograms/dl and 8-306 micrograms/l, respectively. Our findings indicated that: a) health risks for workers were not confined to the nickel-cadmium assembly line or to older workers, b) hazardous exposures still existed and illness appeared in new workers after a clean-up and intervention program, and c) exposures involved increased risks for renal disease and cancers. Finally, there is a need to control exposures and determine health risks in the full cohort of those ever employed, in the workers' children, and in the surrounding environment (air, ground, water) due to the dumping of waste from the plant.
-
Ambulatory electrocardiography in car workers.
Baxter, P J; White, W G; Barnes, G M; Cashman, P M
1978-01-01
A previous study in a car assembly plant showed that production-line workers had a lower incidence rate of heart attacks than executive staff. In the present study some major coronary risk factors and 24-hour ambulatory electrocardiograms were investigated in two age-matched samples of 30 middle-aged men drawn from these occupations. Men with a known history of heart disease were excluded. Compared with production-line workers, executive staff on average had a higher diastolic blood pressure (P less than 0.05) and fewer took heavy exercise during their leisure time (P less than 0.05). Ventricular premature beats (VPB was also similar for each of the periods of work, leisure and sleep. Apart from isolated ectopic beats, disturbances of rhythm were uncommon, and neither VPB nor other arrhythmias appeared to be induced by occupational factors. PMID:656344
-
ERIC Educational Resources Information Center
Galagan, Patricia
1986-01-01
Describes a line manager's successful attempt to design an autonomously run plant. The author discusses the assembly of a team of workers to develop the plant, product design, characteristics of the team members, the employee reward system, role of the plant manager, and the manager's evaluation of the plant's success. (CT)
-
STS-113 workers work on oxygen leak in Endeavor's mid-body
NASA Technical Reports Server (NTRS)
2002-01-01
KENNEDY SPACE CENTER, FLA. -- Workers on Launch Pad 39A inspect an oxygen flex hose fitting. Through manual inspection and using helium detectors, the flex hose was identified as the source of an oxygen leak in Endeavour's mid-body. Visual inspection found a deformity in the flex line braid where it connects to rigid tubing. The entire flex hose assembly and bulkhead fitting were removed early today, and work is under way to complete the installation of a replacement.
-
"Job 1" at Ford: Employee Co-operation.
ERIC Educational Resources Information Center
Werther, William B., Jr.
1985-01-01
After describing the history of Ford Motor Company's relationship with workers from the inception of the assembly line through recent years, the author describes results of the 1979 National Joint Committee on Employee Involvement and 1982 labor negotiations, which resulted in retraining projects, tuition assistance, and career counseling and…
-
A Conceptual Study of Visual Training Methods.
ERIC Educational Resources Information Center
Aik, Chong-Tek
2003-01-01
Proposes a research study to investigate the effects of two visual training methods on the productivity of new workers on an assembly line at a wood products plant in Indonesia. Suggests that such a study would be useful to the managers in deciding what types of training would be most appropriate. (Contains 23 references.) (CAK)
-
Volunteering for Job Enrichment: A Test of Expectancy Theory Predictions
ERIC Educational Resources Information Center
Giles, William F.
1977-01-01
In order to test predictions derived from an expectancy theory model developed by E. E. Lawler, measures of higher-order need satisfaction, locus of control, and intrinsic motivation were obtained from 252 female assembly line workers. Implications of the results for placement of individuals in enriched jobs are discussed. (Editor/RK)
-
Cataloging the Confederate Imprints, 1861-1865 Major Microfilm Set: Designing a Successful Workflow.
ERIC Educational Resources Information Center
Schmitz, Cecilia M.
1995-01-01
Details the flexible assembly-line approach used by Auburn University to catalog the "Confederate Imprints, 1861-1865" major microform set. Five thousand nine hundred sixty-six (5966) distinct items were cataloged over a 3-year period by one professional, one library assistant and two student workers. (Author/JKP)
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-23
..., Formerly Known as Chrysler LLC; Belvidere Assembly Plant: Including On-Site Leased Workers From Aerotek, G..., formerly known as Chrysler LLC, Belvidere Assembly Plant, include on- site leased workers from Aerotek and... certification for workers of the subject firm. The workers are engaged in activities related to the assembly the...
-
García Gavin, Juan; Loureiro Martinez, Manuel; Fernandez-Redondo, Virginia; Seoane, Maria-José; Toribio, Jaime
2008-01-01
Melamine paper is a basic material used in the furniture industry for home and office interiors. Contact allergic dermatitis from melamine formaldehyde resins (MFRs) should be considered in patients who work on melamine paper impregnation lines. We report a case of a 28-year-old female plywood worker who developed eczema on the dorsal side of her hands and wrists after 2 years of working on the melamine paper impregnation line. She had a relevant positive patch-test reaction to MFR, with a negative reaction to formaldehyde. Contact dermatitis due to MFR is not common, and it is usually related to products that are not fully cured or to close contact with intermediate products on the assembly line. Formaldehyde release from MFR can explain most of the positive responses. To our knowledge, this is the first report of MFR contact allergic dermatitis in a worker on a melamine paper impregnation line.
-
3 CFR 9068 - Proclamation 9068 of December 5, 2013. National Pearl Harbor Remembrance Day, 2013
Code of Federal Regulations, 2014 CFR
2014-01-01
.... On National Pearl Harbor Remembrance Day, we honor the men and women who selflessly sacrificed for... the war effort to women who joined the assembly line alongside workers of every background and... Depression, and built the largest middle class and strongest economy in history. Today, with solemn pride and...
-
Percival, L; Tucker, S B; Lamm, S H; Key, M M; Wilds, B; Grumski, K S
1995-02-01
An example of interdisciplinary problem solving by occupational health professionals is presented. Approximately one dozen employees in an aircraft wire harness assembly line complained of dermatitis, alleging workplace exposures as causation. The plant's and consulting industrial hygienists prepared toxicology and exposure assessments for all process materials, manufacturing procedures, and protective equipment used. They identified no common elements in the work environment that may have caused the dermatitis, suggesting multiple causation and possible individual worker sensitivities. An investigative team composed of the industrial hygienists and physicians in outside practice, including dermatologists and occupational medicine physicians, conducted a review of plant operations and proposed that workers with dermatitis complaints receive diagnostic medical examinations. An initial examination medically documented each worker's complaint, and a follow-up included patch testing for selected process materials. The physicians diagnosed a variety of mainly nonoccupationally induced illnesses such as fungal infections, skin cancer (solar induced), acne, etc., confirming the industrial hygienists' original assessment. One case appeared directly work-related and to be a specific assembly component sensitivity. Although several cases with a nonoccupational origin could have been aggravated by working conditions, these workers showed no sensitivity to the component when patch tested.
-
Strategies of performance self-monitoring in automotive production.
Faye, Hélène; Falzon, Pierre
2009-09-01
Production in the automotive industry, based on assembly line work, is now characterized by lean manufacturing and customization. This results in greater flexibility and increased quality demands, including worker performance self-monitoring. The objectives of this study are to refine the concept of performance self-monitoring and to characterize the strategies developed by operators to achieve it. Data were collected based on the method of individual auto-confrontation, consisting of two steps: eleven assembly-line operators of a French automotive company were individually observed and video-taped while they were working; an interview then allowed each operator to discuss his/her activity based on the video-tape. This study expands the concept of performance self-monitoring by highlighting three types of strategies directly oriented toward quality: prevention, feedback control and control action strategies.
-
2002-11-14
KENNEDY SPACE CENTER, FLA. -- Workers on Launch Pad 39A perform checks on Endeavour's oxygen flex hose fitting through manual inspection and using helium detectors. Visual inspection found a deformity in the flex line braid where it connects to rigid tubing. The entire flex hose assembly and bulkhead fitting were removed early today, and work is under way to complete the installation of a replacement.
-
Fatal injuries in the United States construction industry involving cranes 1984-1994.
Suruda, A; Liu, D; Egger, M; Lillquist, D
1999-12-01
There is little published information concerning the epidemiology of injuries in the construction industry involving cranes other than for electrical injury from power line contact. For the 11-year period of 1984 through 1994, the US Occupational Safety and Health Administration (OSHA) investigated 502 deaths in 479 incidents involving cranes in the construction industry. Electrocution was the largest category, with 198 deaths (39%) reported. Other major categories were assembly/dismantling (58 deaths, 12%), boom buckling (41 deaths, 8%), crane upset/overturn (37 deaths, 7%), and rigging failure (36 deaths, 7%). The majority of the deaths during assembly/dismantling involved removal of the boom pins from lattice boom cranes. Only 34% of the construction firms employing the fatally injured workers had ever been inspected by OSHA. OSHA cited the employer for safety violations in 436 deaths (83%). Additional worker training, increased OSHA inspections, and crane inspection programs could prevent many crane-related deaths.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-16
... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,712] Automodular Assemblies of... of Automodular Assemblies of Ohio, Inc., Lordstown, Ohio. The notice was published in the Federal... certification for workers of the subject firm. The workers are engaged in activities related to the assembly of...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-05
... Carlisle Interconnect Assemblies Including On-Site Leased Workers From Volt Services Group and Adecco..., applicable to workers of Tensolite, LLC, d/b/a Carlisle Interconnect Assemblies, including on-site leased... interconnect assemblies. The notice was published in the Federal Register on September 2, 2009 (74 FR 45476...
-
Almeida, Josiane S; Vanderlei, Franciele M; Pastre, Eliane C; Martins, Rodrigo A D M; Padovani, Carlos R; Filho, Guaracy C
2016-06-01
The aim of the present study was to assess plantar pressure distribution and musculoskeletal symptoms following the use of customized insoles among female assembly line workers. The study included 29 female assembly line workers (age, 29.76 ± 5.79 years; weight, 63.79 ± 12.11 kg) with musculoskeletal symptoms who work predominantly while standing. The Nordic Musculoskeletal Questionnaire was administered to the study population. Plantar pressure was determined using a computerized plantar pressure feedback system. A control group (n=13) used ethylvinylacetate insoles (Podaly®) that were individually heat molded and heat glued. The intervention group (n=14) also used the insoles and a strip of the same material was added to the site of greatest plantar pressure as determined by the electronic feedback device. After five weeks, the plantar pressure data were collected again and the questionnaire was administered a second time. There was no significant difference between groups with regard to pain in any anatomic site. However, within each group the lumbar region exhibited a reduction in symptoms in the intervention group (P<0.05), and the feet exhibited a reduction in symptoms in both groups (P<0.05). Mean plantar pressure increased and plantar surface decreased in the intervention group (P<0.05). Insoles increased foot comfort in both groups. However, the added strip did not significantly modify either plantar pressure or other symptoms in female workers. © 2016 Marshfield Clinic.
-
Overtime work and blood pressure in normotensive Japanese male workers.
Nakamura, Koshi; Sakurai, Masaru; Morikawa, Yuko; Miura, Katsuyuki; Ishizaki, Masao; Kido, Teruhiko; Naruse, Yuchi; Suwazono, Yasushi; Nakagawa, Hideaki
2012-09-01
Epidemiological studies have observed conflicting patterns as to whether overtime work increases blood pressure (BP), probably as a consequence of methodological issues. We conducted a prospective cohort study to investigate the relationship between overtime work hours and 1-year changes in BP in 1,235 normotensive Japanese male workers who carried out a variety of jobs in a manufacturing factory. Casual BP measurements were repeated at annual health examinations in 2004-2005, using an automatic manometer. An analysis of covariance that incorporated potential confounding factors including baseline age, body mass index (BMI), and lifestyle factors was used to calculate and compare the means of the 1-year change in systolic (SBP) and diastolic BP (DBP). The participants were grouped according to their average monthly overtime work hours obtained from timecard data between April and September 2004. The multivariate-adjusted mean for 1-year change in DBP in 611 male assembly-line workers was 1.5 mm Hg (95% confidence interval (CI) 0.8-2.2) for <40.0 h/month, 2.3 mm Hg (95% CI 1.3-3.2) for 40.0-79.9 h/month, and 5.3 mm Hg (95% CI 2.7-7.9) for ≥ 80.0 h/month (P for heterogeneity = 0.02). A broadly similar pattern was observed for SBP. In contrast, there was no significant difference in means 1-year change for both SBP and DBP in 315 clerks and 309 engineers/special technicians, grouped according to overtime work hours. Extensive overtime work was associated with increased BP in normotensive male assembly-line workers, but not in clerks and engineers/special technicians.
-
Wang, Zhong-Xu; Qin, Ru-Li; Li, Yu-Zhen; Zhang, Xue-Yan; Jia, Ning; Zhang, Qiu-Ling; Li, Gang; Zhao, Jie; Li, Huan-Huan; Jiang, Hai-Qiang
2011-08-01
To investigate the work-related musculoskeletal disorders among automobile assembly workers, to discusses the related risk factors and their relationship. The selected 1508 automobile assembly workers from a north car manufacturing company were regarded as the study object. The hazard zone jobs checklist, Nordic musculoskeletal symptom questionnaire (NMQ) and pain questionnaire were used to perform the epidemiological cross-sectional and retrospective survey and study for the General status, awkward ergonomics factors and related influencing factors, and musculoskeletal disorders of workers. The predominant body sites of occurring WMSDs among automobile assembly workers were mainly low back, wrist, neck and shoulders, the predominant workshop section of occurring WMSDs were mostly concentrated in engine compartment, interior ornament, door cover, chassis and debugging section. The predominant body site of WMSDs among engine compartment and chassis section workers was low back, interior ornament workers were low back and wrist, door cover workers was wrist, chassis workers was low back, debugging workers were neck and low back. Neck musculoskeletal disorders had the trend with the increase of a body height; Smoking may increase the occurrence of musculoskeletal disorders. The WMSDs appears to be a serious ergonomic proble assem among automobile assembly workers, predominant occurring site of WMSDs is with different workshop section, its characteristics is quite obvious, probably related to its existing awkward work position or activities. The worker height and smoking habits may be important factors which affect musculoskeletal disorders happen.
-
Manufacturing Technology Research Needs of the Gear Industry.
1987-12-31
Management Shortcomings within the U.S. Precision Gear Industry ........... 33 2.2.7 European Gear and Machine Tool Companies ....... .. 35 2.2.8 German...manufacturing becomes more sophisticated, workers are running numerically con- trolled computer equipment requiring an understanding of math. 2.2.6.9 Management ...inefficiencies of the job shop environ- ment by managing the gear business as a backward integra- tion of the assembly line. o Develop and maintain
-
Human Factors and Their Effects on Human-Centred Assembly Systems - A Literature Review-Based Study
NASA Astrophysics Data System (ADS)
Wang, Q.; Abubakar, M. I.
2017-09-01
If a product has more than one component, then it must be assembled. Assembly of products relies on assembly systems or lines in which assembly of each product is often carried out manually by human workers following assembly sequences in various forms. It is widely understood that efficiency of assembling a product by reducing assembly times (therefore costs) is vital particularly for small and medium-sized manufacturing companies to survive in an increasingly competitive market. Ideally, it is helpful for pre-determining efficiency or productivity of a human-centred assembly system at the early design stage. To date, most research on performance of an assembly system using modelling simulation methods is focused on its “operational functions”. The term used in a narrow sense always indicates the performance of the “operational system”, which does not incorporate the effect of human factors that may also affect the system performance. This paper presents a research outcome of findings through a literature review-based study by identifying possible human factors that mostly affect the performance on human-centred manufacturing systems as part of the research project incorporating parameters of human factors into a DES (discrete event simulation) tool.
-
ERIC Educational Resources Information Center
2003
In February 2003, 75 individuals representing business, labor, academia, government, workforce intermediaries, and other sectors participated in an assembly on the role of intermediaries in achieving worker success and business prosperity. The assembly statement outlined policies, approaches, and actions needed to ensure workers' access to…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-18
... Springfield Plant Formerly Known as VC Regional Assembly & Manufacturing, LLC Including On-Site Leased Workers... formerly known as VC Regional Assembly & Manufacturing, LLC. Workers separated from employment at the... name VC Regional Assembly & Manufacturing, LLC. Accordingly, the Department is amending this...
-
Factors associated with dysmenorrhea among workers in French poultry slaughterhouses and canneries.
Messing, K; Saurel-Cubizolles, M J; Bourgine, M; Kaminski, M
1993-05-01
The food and agriculture industry employs 15% of the female industrial work force in France. Workers in this industry are exposed to a variety of environmental and organizational constraints: cold, uncomfortable postures, assembly-line work, irregular schedules. In 1987 to 1988, a medical examination and questionnaire were administered to 726 menstruating women who had not been pregnant during the 2 previous years, as part of a study of French workers in 17 poultry slaughterhouses and 6 canning factories. Dysmenorrhea during the previous year was more prevalent among younger women and smokers, and less prevalent among users of oral contraceptives. After adjustment for nonoccupational variables, dysmenorrhea was significantly related to several parameters expressing cold exposure and physical work load. Other parameters such as job satisfaction and hours of domestic work were not associated with dysmenorrhea.
-
Manufacturing Technology Research Needs of the Gear Industry
1987-12-31
Precision Gear Industry, . .... 31 2.2.6.8 Availability’of Skilied Craftsmen. o.... 32 2.2.6.9 Management Shortcomings within the U.S. Precision Gear...becomes more sophisticated, workers are running numerically con- trolled computer equipment requiring an understanding of math. I 2.2.6.9 Management ...inefficiencies of the job shop environ- ment by managing the gear business as a backward integra- tion of the assembly line. o Develop and maintain employee
-
2002-11-14
KENNEDY SPACE CENTER, FLA. -- Workers on Launch Pad 39A inspect an oxygen flex hose fitting. Through manual inspection and using helium detectors, the flex hose was identified as the source of an oxygen leak in Endeavour's mid-body. Visual inspection found a deformity in the flex line braid where it connects to rigid tubing. The entire flex hose assembly and bulkhead fitting were removed early today, and work is under way to complete the installation of a replacement.
-
2002-11-14
KENNEDY SPACE CENTER, FLA. -- Workers on Launch Pad 39A inspect an oxygen flex hose fitting. Through manual inspection and using helium detectors, the flex hose was identified as the source of an oxygen leak in Endeavour's mid-body. Visual inspection found a deformity in the flex line braid where it connects to rigid tubing. The entire flex hose assembly and bulkhead fitting were removed early today, and work is under way to complete the installation of a replacement.
-
Chee, H; Rampal, K
2003-01-01
Aims: To determine the relation between sick leave and selected exposure variables among women semiconductor workers. Methods: This was a cross sectional survey of production workers from 18 semiconductor factories. Those selected had to be women, direct production operators up to the level of line leader, and Malaysian citizens. Sick leave and exposure to physical and chemical hazards were determined by self reporting. Three sick leave variables were used; number of sick leave days taken in the past year was the variable of interest in logistic regression models where the effects of age, marital status, work task, work schedule, work section, and duration of work in factory and work section were also explored. Results: Marital status was strongly linked to the taking of sick leave. Age, work schedule, and duration of work in the factory were significant confounders only in certain cases. After adjusting for these confounders, chemical and physical exposures, with the exception of poor ventilation and smelling chemicals, showed no significant relation to the taking of sick leave within the past year. Work section was a good predictor for taking sick leave, as wafer polishing workers faced higher odds of taking sick leave for each of the three cut off points of seven days, three days, and not at all, while parts assembly workers also faced significantly higher odds of taking sick leave. Conclusion: In Malaysia, the wafer fabrication factories only carry out a limited portion of the work processes, in particular, wafer polishing and the processes immediately prior to and following it. This study, in showing higher illness rates for workers in wafer polishing compared to semiconductor assembly, has implications for the governmental policy of encouraging the setting up of wafer fabrication plants with the full range of work processes. PMID:12660374
-
Free adrenaline and noradrenaline excretion related to occupational stress.
Timio, M; Gentili, S; Pede, S
1979-01-01
Urinary levels of free adrenaline and noradrenaline were measured in two groups of healthy male industrial workers exposed to alternate four-day periods of working conditions with and without time stress, to test the hypothesis that the sympathetic nervous system is overactivated by occupational stress. Thirty confectionary workers alternated piece-work (payment by results) and work with a fixed daily wage while 30 metal workers alternated work on an assembly line with work off it. Under time stress urinary free adrenaline was 450 per cent and noradrenaline 230 per cent of the levels for similar work without time stress but involving equal oxygen consumption. These differences were statistically highly significant and they persisted on retesting after six months of alternating work regimens. They support the concept that occupational stress in industrial workers influences the adrenosympathetic system and they indicate a possible method for assessing the effects of high levels of sympathetic activity on the aetiology of ischaemic heart disease. PMID:508478
-
Jeon, In Sik; Jeong, Byung Yong; Jeong, Ji Hyun
2016-10-01
This study investigates workers' favoured rotation types by their age and compares means between subjective and actual scores on productivity, quality and musculoskeletal disorders (MSDs). The subjects of research were 422 assembly line units in Hyundai Motor Company. The survey of 422 units focused on the workers' preference for 11 different rotation types and subjective scores for each type's perceived benefits, both by the workers' age. Then, actual scores on production-related indices were traced over a five-year period. The results suggest that different rotation types lead to different results in productivity, product quality and MSDs. Workers tend to perceive job rotation as a helpful method to enhance satisfaction, productivity and product quality more so than the actual production data suggests. Job rotation was especially effective in preventing MSDs for workers aged under 45, while its effects were not clear for the workers aged 45 years or older. Practitioner's Summary: This research presents appropriate rotation type for different age groups. Taking workers' age into account, administrators can use the paper's outcomes to select and implement the suitable rotation type to attain specific goals such as enhancing productivity, improving product quality or reducing MSDs.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-10
... Manufacturing Formerly Known as General Motors Corporation Shreveport Assembly Plant Including On-Site Leased..., Shreveport Assembly Plant, including on-site leased workers from Aerotek and Kelly Services, Shreveport..., Shreveport Assembly Plant. The Department has determined that these workers were sufficiently under the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-14
... Manufacturing, Formerly Known as General Motors Corporation, Shreveport Assembly Plant, Including On-Site Leased... General Motors Corporation, Shreveport Assembly Plant, including on-site leased workers from Aerotek and..., Shreveport Assembly Plant. The Department has determined that these workers were sufficiently under the...
-
On-Line Allocation Of Robot Resources To Task Plans
NASA Astrophysics Data System (ADS)
Lyons, Damian M.
1989-02-01
In this paper, I present an approach to representing plans that make on-line decisions about resource allocation. An on-line decision is the evaluation of a conditional expression involving sensory information as the plan is being executed. I use a plan representation called 7ZS10'1 1,12that has been especially designed for the domain of robot programming, and in particular, for the problem of on-line decisions. The resource allocation example is based on the robot assembly cell architecture outlined by Venkataraman and Lyons16. I begin by setting forth a definition of on-line decision making and some arguments as to why this form of decision making is important and useful. To set the context for the resource allocation example, I take some care in categorizing the types of on-line decision making and the approaches adopted by other workers so far. In particular, I justify a plan-based approach to the study of on-line decision making. From that, the focus shifts to one type of decision making: on-line allocation of robot resources to task plans. Robot resources are the physical manipulators (grippers, wrists, arms, feeders, etc) that are available to carry out the task. I formulate the assembly cell architecture of Venkataraman and Lyons16 as an R.S plan schema, and show how the on-line allocation specified in that architecture can be implemented. Finally, I show how considering the on-line allocation of logical resources, that is a physical resource plus some model information, can be used as a non-traditional approach to some problems in robot task planning.
-
ADVANTG Shielding Analysis for Closure Operations in an Open-Mode Repository
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bevill, Aaron M; Radulescu, Georgeta; Scaglione, John M
2013-01-01
en-mode repository concepts could require worker entry into access drifts after placement of fuel casks in order to perform activities related to backfill, plug emplacement, routine maintenance, or performance confirmation. An ideal emplacement-drift shielding configuration would minimize dose to workers while maximizing airflow through the emplacement drifts. This paper presents a preliminary investigation of the feasibility and effectiveness of radiation shielding concepts that could be employed to facilitate worker operations in an open-mode repository. The repository model for this study includes pressurized-water reactor fuel assemblies (60 GWd/MTU burnup, 40 year post-irradiation cooldown) in packages of 32 assemblies. The closest fuelmore » packages are 5 meters from dosimetry voxels in the access drift. The unshielded dose to workers in the access drift is 73.7 rem/hour. Prior work suggests that open-mode repository concepts similar to this one would require 15 m3/s of ventilation airflow. Shielding concepts considered here include partial concrete plugs, labyrinthine shields, and stainless steel photon attenuator grids. Maximum dose to workers in the access drift was estimated for each shielding concept using MCNP5 with variance reduction parameters generated by ADVANTG. Because airflow through the shielding is important for open-mode repositories, a semi-empirical estimate of the head loss due to each shielding configuration was also calculated. Airflow and shielding performance vary widely among the proposed shielding configurations. Although the partial plug configuration had the best airflow performance, it allowed dose rates 1500 greater than the specified target. Labyrinthine shielding concepts yield doses on the order of 1 mrem/hour with configurations that impose 3 to 11 J/kg head loss. Adding 1 cm lead lining to the airflow channels of labyrinthine designs further reduces the worker dose by 65% to 95%. Photon-attenuator concepts may reduce worker dose to as low as 29 mrem/hour with head loss on the order of 1.9 J/kg.« less
-
1983-06-01
Payne (Eds.) Stress at work. New York: John Wiley, 1978. Broadbent, D. E. Decision and stress. New York: Academic Press, 1971. Bryden, M. P. Binaural ...to satisfaction [emphasis is the author’s]. Bryden, M. P. Binaural competition and division of attention as determi- nants of the laterality effect in...invasively. This system has been used in an industrial setting to monitor workers on an assembly line. The method of obtaining heart rate, it’s beat
-
STS-113 workers work on oxygen leak in Endeavor's mid-body
NASA Technical Reports Server (NTRS)
2002-01-01
KENNEDY SPACE CENTER, FLA. -- During inspections at Launch Pad 39A, an oxygen flex hose fitting (shown here) was identified as the source of an oxygen leak in Endeavour's mid-body. The leak was identified manually and using helium detectors. Visual inspection found a deformity in the flex line braid where it connects to rigid tubing. The entire flex hose assembly and bulkhead fitting were removed early today, and work is under way to complete the installation of a replacement.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-28
... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-65,762] Chrysler, LLC, Sterling Heights Assembly Plant Including On-Site Leased Workers From Caravan Knight Facilities Management LLC and... Chrysler, LLC, Sterling Heights Assembly Plant, Sterling Heights, Michigan. The notice was published in the...
-
Gilles, Martine Annie; Guélin, Jean-Charles; Desbrosses, Kévin; Wild, Pascal
2017-10-01
The working population is getting older. Workers must adapt to changing conditions to respond to the efforts required by the tasks they have to perform. In this laboratory-based study, we investigated the capacities of motor adaptation as a function of age and work pace. Two phases were identified in the task performed: a collection phase, involving dominant use of the lower limbs; and an assembly phase, involving bi-manual motor skills. Results showed that senior workers were mainly limited during the collection phase, whereas they had less difficulty completing the assembly phase. However, senior workers did increase the vertical force applied while assembling parts, whatever the work pace. In younger and middle-aged subjects, vertical force was increased only for the faster pace. Older workers could adapt to perform repetitive tasks under different time constraints, but adaptation required greater effort than for younger workers. These results point towards a higher risk of developing musculoskeletal disorders among seniors. Copyright © 2017 Elsevier Ltd. All rights reserved.
-
Impact of a poka-yoke device on job performance of individuals with cognitive impairments.
Erlandson, R F; Noblett, M J; Phelps, J A
1998-09-01
Job performance and production related issues are important not only to successful vocational training and ultimate job placement for individuals with cognitive disabilities, but also for their ability to have expanded vocational options. This study hypothesized that the application of Kaizen philosophy, and poka-yoke techniques in particular, could create job opportunities and improve productivity of individuals with cognitive disabilities. Poka-yoke or error-proofing techniques are part of the collection of Kaizen techniques. Kaizen refers to continuous improvement in performance, cost/effectiveness, and quality. Kaizen strives to empower the worker, increase worker satisfaction, facilitate a sense of accomplishment, and thereby create pride-of-work. These techniques typically reduce the physical and cognitive demands of a task and thereby render the task more accessible. The job was a fuel clamp assembly. A redesigned assembly fixture was the poka-yoke intervention. Consistent with poka-yoke principles, the intervention improved the productivity of everyone attempting the assembly. In particular, the workers in this study showed an 80% increase in productivity and an average percent error drop from 52% to about 1% after the process redesign. Furthermore, the workers showed improved morale, self-esteem, and pride-of-work. Prior to the process redesign, only the higher functioning workers could successfully perform the assembly. After the redesign a greater number of workers could successfully perform the assembly. These results not only validated the study hypothesis, but demonstrated that the success facilitated by applying Kaizen techniques had similar results with individuals with cognitive disabilities as with nondisabled workers.
-
Kamalinia, Mojtaba; Nasl Saraji, Gebreal; Kee, Dohyung; Hosseini, Mostafa; Choobineh, Alireza
2013-01-01
Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.
-
SUNDRAM, Bala Murali; DAHLUI, Maznah; CHINNA, Karuthan
2015-01-01
The aim of this study was to examine the effectiveness of Progressive Muscle Relaxation (PMR) as part of a Worksite Health Promotion Program on self-perceived stress, anxiety and depression among male automotive assembly-line workers through a quasi-experimental trial. Two assembly plants were chosen with one receiving PMR therapy and the other Pamphlets. Intention-to-treat analysis was conducted to test the effectiveness of the relaxation therapy. Stress, Depression and Anxiety levels were measured using the shortened DASS-21 questionnaire. Data were analyzed using Chi-square, Independent sample t test and Repeated-measures analysis of variance to test the significance of the effects of intervention (time * group) for the measures of Stress, Depression and Anxiety. Significant favourable intervention effects on stress were found in the PMR group (Effect size=0.6) as compared to the Pamphlet group (Effect size=0.2). There was a significant group *time interaction effect (p<0.001) on Stress levels. Depression and Anxiety levels were minimal at baseline in both the groups with mild or no reduction in levels. The improvement in stress levels showed the potential of PMR therapy as a coping strategy at the workplace. Further research in this field is necessary to examine the beneficial effects of coping strategies in the workplace. PMID:26726829
-
Sundram, Bala Murali; Dahlui, Maznah; Chinna, Karuthan
2016-06-10
The aim of this study was to examine the effectiveness of Progressive Muscle Relaxation (PMR) as part of a Worksite Health Promotion Program on self-perceived stress, anxiety and depression among male automotive assembly-line workers through a quasi-experimental trial. Two assembly plants were chosen with one receiving PMR therapy and the other Pamphlets. Intention-to-treat analysis was conducted to test the effectiveness of the relaxation therapy. Stress, Depression and Anxiety levels were measured using the shortened DASS-21 questionnaire. Data were analyzed using Chi-square, Independent sample t test and Repeated-measures analysis of variance to test the significance of the effects of intervention (time * group) for the measures of Stress, Depression and Anxiety. Significant favourable intervention effects on stress were found in the PMR group (Effect size=0.6) as compared to the Pamphlet group (Effect size=0.2). There was a significant group *time interaction effect (p<0.001) on Stress levels. Depression and Anxiety levels were minimal at baseline in both the groups with mild or no reduction in levels. The improvement in stress levels showed the potential of PMR therapy as a coping strategy at the workplace. Further research in this field is necessary to examine the beneficial effects of coping strategies in the workplace.
-
Occupational Exposure to Chromium of Assembly Workers in Aviation Industries.
Genovese, G; Castiglia, L; Pieri, M; Novi, C; d'Angelo, R; Sannolo, N; Lamberti, M; Miraglia, N
2015-01-01
Aircraft are constructed by modules that are covered by a "primer" layer, which can often contain hexavalent chromium [Cr(VI)], known carcinogen to humans. While the occupational exposure to Cr(VI) during aircraft painting is ascertained, the exposure assessment of assembly workers (assemblers) requires investigations. Three biological monitoring campaigns (BM-I,II,III) were performed in an aviation industry, on homogeneous groups of assemblers (N = 43) and controls (N = 23), by measuring chromium concentrations in end-shift urine collected at the end of the working week and the chromium concentration difference between end- and before-shift urines. BM-I was conducted on full-time workers, BM-II was performed on workers after a 3-4 day absence from work, BM-III on workers using ecoprimers with lower Cr(VI) content. Samples were analyzed by atomic absorption spectroscopy and mean values were compared by T-test. Even if Cr concentrations measured during BM-I were lower than Biological Exposure Indices by ACGIH, statistically significant differences were found between urinary Cr concentrations of workers and controls. Despite 3-4 days of absence from work, urinary chromium concentrations measured during BM-II were still higher than references from nonoccupationally exposed populations. In the BM-III campaign, the obtained preliminary results suggested the efficacy of using ecoprimers. The healthcare of workers exposed to carcinogenic agents follows the principle of limiting the exposure to "the minimum technically possible". The obtained results evidence that assemblers of aviation industries, whose task does not involve the direct use of primers containing Cr(VI), show an albeit slight occupational exposure to Cr(VI), that must be carefully taken into consideration in planning suitable prevention measures during risk assessment and management processes.
-
[Simulation and Design of Infant Incubator Assembly Line].
Ke, Huqi; Hu, Xiaoyong; Ge, Xia; Hu, Yanhai; Chen, Zaihong
2015-11-01
According to current assembly situation of infant incubator in company A, basic industrial engineering means such as time study was used to analyze the actual products assembly production and an assembly line was designed. The assembly line was modeled and simulated with software Flexsim. The problem of the assembly line was found by comparing simulation result and actual data, then through optimization to obtain high efficiency assembly line.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-02
... Cities Assembly Plant Vehicle Operations Division Including On-Site Leased Workers From AEROTEK, Albers... Industries, Waste Management, VMX, Nascote Industries, Delphi Electronics & Safety, Unicomm, And Pacer... Operations Division, St. Paul, Minnesota. The workers are engaged in activities related to the production of...
-
BREAKTHROUGH IN ON THE JOB TRAINING.
ERIC Educational Resources Information Center
GOMERSALL, EARL R.; MYERS, M. SCOTT
A STUDY WAS MADE AT TEXAS INSTRUMENTS INC. OF THE EFFECT OF ANXIETY ON LEARNING TIME AND ATTITUDES AMONG NEW EMPLOYEES. BEFORE INTERVIEWS WITH ASSEMBLY WORKERS AND THEIR SUPERVISORS THE EXPERIMENT IDENTIFIED THE IMPORTANCE OF ANXIETY IN INHIBITING JOB EFFECTIVENESS FOR BOTH OPERATORS AND SUPERVISORS. NEW WOMEN ASSEMBLY WORKERS WERE DIVIDED INTO A…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-19
.... Diversified Contract Service, Inc. 639, and Logistics Management Services, Inc. Fenton, MO; Amended..., 2008, applicable to workers of Chrysler LLC, St. Louis North Assembly Plant, Fenton, Missouri. The... Logistics Management Services, Inc. worked on-site at the Chrysler LLC, Fenton, Missouri plant (Logistics...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-19
...., Diversified Contract Service, Inc. 639, and Logistics Management Services, Inc., Fenton, MO; Amended..., 2008, applicable to workers of Chrysler LLC, St. Louis North Assembly Plant, Fenton, Missouri. The... Logistics Management Services, Inc. worked on-site at the Chrysler LLC, Fenton, Missouri plant (Logistics...
-
Migrant workers and labor market segmentation in Japan.
Mori, H
1994-01-01
The amended Immigration Control Act of 1990 focused on 1) redefinition of the resident status of foreign nationals, 2) clarification of immigration regulations, and 3) countermeasures to cope with the problem of illegal migrant workers. Tough penalties were introduced for illegal employment. The reform paved the way for third generation Nikkei (foreigners of Japanese ancestry) and also opened the door to non-Nikkei married to second generation Nikkei to reside in the country. The migration of Nikkei workers to Japan dates back to the beginning of the 1980s. The Technical Intern Training Program introduced in 1993 also opened a legal channel for the employment of unskilled or semi-skilled foreigners. The categories of foreign workers were heavily concentrated in the automobile and electric appliances industries, mostly as assembly line workers. Foreign students and clandestine workers had a wider dispersion in the labor force than the Nikkei. Students often find work in the urban service sector while attending school. Clandestine male workers predominate in the construction industry as unskilled workers. According to the size of firms, small firms had had the most acute labor shortages in the past 15 years prior to 1994, especially in the late 1980s. The Immigration Law of 1990 brought major changes in the hiring practices of large firms that began hiring legal workers such as the Nikkei, while small firms continued hiring clandestine workers from Asian countries. Foreign workers also earned almost as much as native part-time workers and sometimes even outstripped native seasonal workers. In terms of wages, Nikkei South Americans were on the top followed by Pakistanis, Bangladeshis, Sri Lankans, Nepalese, Ghanians, and Iranians on the bottom. Unskilled foreign workers generally had a high turnover rate with the Nikkei showing the lowest rate. Only 7% of the Nikkei changed jobs more than four times vs. 16-17% of foreign students and 21% of clandestine workers.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-26
... Systems, Including On-Site Leased Workers From Technical Needs and National Engineering, Nashua, New... to the production of electrical connectors and backplane assemblies. The subject worker group includes on-site leased workers from Technical Needs and National Engineering. Workers of the subject firm...
-
Evidence for adverse reproductive outcomes among women microelectronic assembly workers.
Huel, G; Mergler, D; Bowler, R
1990-01-01
Microelectronics assembly entails complex processes where several potentially fetotoxic chemical compounds are used extensively. This study was undertaken to assess the potential adverse reproductive outcomes among former women workers in a microelectronics assembly plant in New Mexico with respect to a comparable population from the same geographical region and to examine the relation between these outcomes and employment history in this plant. After matching a pool of 143 former microelectronic female workers and 105 referents, 90 former microelectronic female worker-referent pairs were constituted (representing 302 and 324 pregnancies in former workers and referents respectively). The odds ratio (for pair matching design) of spontaneous abortion among women workers, before beginning to assemble microelectronic components, was 0.9 (chi 2 = 0.04; NS). After the beginning of employment this odds ratio became 5.6 (chi 2 = 9.8; p less than 1%). This estimated odds ratio decreased to 4.0, taking into account the increased risk for spontaneous abortion in previous pregnancies before employment (chi 2 = 5.4; p less than 5%). It was not possible to determine if this effect was reversible owing to the small number of pairs available after employment. The findings of this study corroborate the results of former studies that suggest a potential association between electronic manufacturing activity and risk of spontaneous abortion. Although the organic solvents were suspected of being the potential risk factor, this study was inconclusive from this point of view. Nevertheless, these investigations may provide some insight into reproductive outcomes among female workers exposed to solvents. PMID:2378817
-
NASA Astrophysics Data System (ADS)
Gorlach, Igor; Wessel, Oliver
2008-09-01
In the global automotive industry, for decades, vehicle manufacturers have continually increased the level of automation of production systems in order to be competitive. However, there is a new trend to decrease the level of automation, especially in final car assembly, for reasons of economy and flexibility. In this research, the final car assembly lines at three production sites of Volkswagen are analysed in order to determine the best level of automation for each, in terms of manufacturing costs, productivity, quality and flexibility. The case study is based on the methodology proposed by the Fraunhofer Institute. The results of the analysis indicate that fully automated assembly systems are not necessarily the best option in terms of cost, productivity and quality combined, which is attributed to high complexity of final car assembly systems; some de-automation is therefore recommended. On the other hand, the analysis shows that low automation can result in poor product quality due to reasons related to plant location, such as inadequate workers' skills, motivation, etc. Hence, the automation strategy should be formulated on the basis of analysis of all relevant aspects of the manufacturing process, such as costs, quality, productivity and flexibility in relation to the local context. A more balanced combination of automated and manual assembly operations provides better utilisation of equipment, reduces production costs and improves throughput.
-
The Current Working Conditions in Ugandan Apparel Assembly Plants.
Tebyetekerwa, Mike; Akankwasa, Nicholus Tayari; Marriam, Ifra
2017-12-01
The present rapid shift of industrialization from developed to developing countries requires developing countries to understand issues related to work organization, management, and working conditions. There are many factors slackening production, of which working conditions is part. A complete inquiry into the workers' working conditions can enable managements to reduce risks in the workplaces and improve productivity. Understanding and awareness of the benefits of workplace research and a probe into the working conditions in the Ugandan apparel assembly plants are urgently required. A total of 103 (70 women and 33 men) workers from five different plants were interviewed. Together with the top management of various plants, questionnaires about the workers' opinions of their physical working conditions were prepared. Data was collected using two methods: (1) questionnaire; and (2) observation of the workers during their work. The results indicated that poor plant working conditions were mainly contributed by the workers' social factors and the management policies. The government, together with the management, should work to improve the working conditions in the apparel assembly plants, as it greatly affects both.
-
77 FR 70114 - Airworthiness Directives; Cessna Aircraft Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-23
... assemblies, which were caused by the fuel return line assembly rubbing against the right steering tube assembly during full rudder pedal actuation. This AD requires you to inspect the fuel return line assembly... the fuel return line assembly and both the right steering tube assembly and the airplane structure...
-
Corporate ergonomics programme at automobiles Peugeot-Sochaux.
Moreau, M
2003-01-01
An ergonomic assessment tool for design procedures, exclusive to Peugeot-Citroën, called ECM, was developed and applied at the design stage by method technicians in the 1990s. It generates data, which are followed up by the project leader of a new model and ergonomists until two years before each launch. During this time, vehicle design is subject to modification, to adapt to ergonomic demands. Simplified methods (DACORS and METEO) were also developed to assess workstations on the shop floor in trim and final plants. Assessments were used to grade the workstations into four profiles linked to physical and static requirements. Production technicians are responsible for the application of these local methods on the shop floor. The management of these centres aimed to reduce the risks of musculoskeletal disorders by reduced heavy profiles of these stations. New cases of musculoskeletal disorders, surveyed by the company doctor among workers on the assembly lines had decreased since 1996. In 1999, the incidence increased again, despite the pursuit of ergonomic methods. This increase in musculoskeletal disorders was above all linked to a major reorganisation of work conditions, including a reduction in the cycle time on the assembly line, and to a move into a new workshop.
-
2008-10-17
CAPE CANAVERAL, Fla. - Workers lift the Ares IX upper stage segments’ ballast assemblies off a truck in high bay 4 of the Vehicle Assembly Building at NASA’s Kennedy Space Center, part of the preparations for the test of the Ares IX rocket. These ballast assemblies will be installed in the upper stage 1 and 7 segments and will mimic the mass of the fuel. Their total weight is approximately 160,000 pounds. The test launch of the Ares IX in 2009 will be the first designed to determine the flight-worthiness of the Ares I rocket. Ares I is an in-line, two-stage rocket that will transport the Orion crew exploration vehicle to low-Earth orbit. The Ares I first stage will be a five-segment solid rocket booster based on the four-segment design used for the space shuttle. Ares I’s fifth booster segment allows the launch vehicle to lift more weight and reach a higher altitude before the first stage separates from the upper stage, which ignites in midflight to propel the Orion spacecraft to Earth orbit. Photo credit: NASA/Kim Shiflett
-
2008-10-17
CAPE CANAVERAL, Fla. - Workers position Ares IX upper stage segments’ ballast assemblies along the floor of high bay 4 in the Vehicle Assembly Building at NASA’s Kennedy Space Center, part of the preparations for the test of the Ares IX rocket. These ballast assemblies will be installed in the upper stage 1 and 7 segments and will mimic the mass of the fuel. Their total weight is approximately 160,000 pounds. The test launch of the Ares IX in 2009 will be the first designed to determine the flight-worthiness of the Ares I rocket. Ares I is an in-line, two-stage rocket that will transport the Orion crew exploration vehicle to low-Earth orbit. The Ares I first stage will be a five-segment solid rocket booster based on the four-segment design used for the space shuttle. Ares I’s fifth booster segment allows the launch vehicle to lift more weight and reach a higher altitude before the first stage separates from the upper stage, which ignites in midflight to propel the Orion spacecraft to Earth orbit. Photo credit: NASA/Kim Shiflett
-
2008-10-17
CAPE CANAVERAL, Fla. - Workers lower an Ares IX upper stage segments’ ballast assembly onto the floor of high bay 4 in the Vehicle Assembly Building at NASA’s Kennedy Space Center, part of the preparations for the test of the Ares IX rocket. These ballast assemblies will be installed in the upper stage 1 and 7 segments and will mimic the mass of the fuel. Their total weight is approximately 160,000 pounds. The test launch of the Ares IX in 2009 will be the first designed to determine the flight-worthiness of the Ares I rocket. Ares I is an in-line, two-stage rocket that will transport the Orion crew exploration vehicle to low-Earth orbit. The Ares I first stage will be a five-segment solid rocket booster based on the four-segment design used for the space shuttle. Ares I’s fifth booster segment allows the launch vehicle to lift more weight and reach a higher altitude before the first stage separates from the upper stage, which ignites in midflight to propel the Orion spacecraft to Earth orbit. Photo credit: NASA/Kim Shiflett
-
29 CFR 1926.1407 - Power line safety (up to 350 kV)-assembly and disassembly.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 29 Labor 8 2011-07-01 2011-07-01 false Power line safety (up to 350 kV)-assembly and disassembly... Cranes and Derricks in Construction § 1926.1407 Power line safety (up to 350 kV)—assembly and disassembly... area of assembly/disassembly, closer than 20 feet to a power line during the assembly/disassembly...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-07
... Formerly Known as General Motors Corporation, Orion Assembly Plant Including On-Site Leased Workers From... Motors Corporation, Orion Assembly Plant, Lake Orion, Michigan. The notice was published in the Federal..., Michigan location of General Motors Company, formerly known as General Motors Corporation, Orion Assembly...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-03
..., Formerly Known as General Motors Corporation, Orion Assembly Plant, Including On-Site Leased Workers From... of General Motors Company, formerly known as General Motors Corporation, Orion Assembly Plant, Lake... General Motors Company, formerly known as General Motors Corporation, Orion Assembly Plant. The Department...
-
1988-01-01
This document contains portions of the text of a 1988 UN Resolution on measures to improve the situation and ensure the human rights and dignity of all migrant workers. In this resolution, the General Assembly reaffirms international instruments protecting human rights but articulates a further need to improve the protection of human rights for migrant workers and their families. The General Assembly then noted the two most recent reports of the Working Group on the Drafting of an International Convention on the Protection of the Rights of All Migrant Workers and Their Families and took measures to enable the Working Group to complete its task.
-
Edimansyah, Bin Abdin; Rusli, Bin Nordin; Naing, Lin; Mohamed Rusli, Bin Abdullah; Winn, Than; Tengku Mohamed Ariff, Bin Raja Hussin
2008-01-01
Depression, anxiety and stress have been recognized as important mental outcome measures in stressful working settings. The present study explores the prevalence of self-perceived depression, anxiety and stress; and their relationships with psychosocial job factors. A cross-sectional study involving 728 male automotive assembly workers was conducted in two major automotive assembly plants in Malaysia using the validated Malay versions of the Depression Anxiety Stress Scales (DASS) and Job Content Questionnaire (JCQ). Based on the DASS cut-off of > or =78 percentile scores, the prevalence of self-perceived depression, anxiety and stress was 35.4%, 47.2% and 31.1%, respectively. Four (0.5%), 29 (4.0%) and 2 (0.3%) workers, respectively, reported extremely severe self-perceived depression, anxiety and stress. Multiple linear regression analyses, controlling for age, education, salary, duration of work and marital status, revealed that psychological job demand, job insecurity and hazardous condition were positively associated with DASS-Depression, DASS-Anxiety and DASS-Stress; supervisor support was inversely associated with DASS-Depression and DASS-Stress. We suggest that reducing psychological job demand, job insecurity and hazardous condition factors may improve the self-perceived depression, anxiety and stress in male automotive assembly workers. Supervisor support is protective for self-perceived depression and stress.
-
ERIC Educational Resources Information Center
San Mateo County Office of Education, Redwood City, CA. Career Preparation Centers.
This thirteenth of fifteen sets of Adult Competency Education (ACE) Competency Based Job Descriptions in the ACE kit contains job descriptions for Secretary, Keypunch Operator, Electronics Assembler, Printed Circuit Assembler, Micro Electronincs Assembler, Chassis Assembler, and Machinist Apprentice. Each begins with a fact sheet that includes…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-12
..., Manufacturing Truck and Activity Division, Jefferson North Assembly Plant, Including On-Site Leased Workers From..., Jefferson North Assembly Plant, Detroit, Michigan. The notice was published in the Federal Register on April... substantial portion of which are shipped to an affiliated plant where they are used in the assembly of...
-
The Bicycle Assembly Line Game
ERIC Educational Resources Information Center
Klotz, Dorothy
2011-01-01
"The Bicycle Assembly Line Game" is a team-based, in-class activity that helps students develop a basic understanding of continuously operating processes. Each team of 7-10 students selects one of seven prefigured bicycle assembly lines to operate. The lines are run in real-time, and the team that operates the line that yields the…
-
1981-01-22
Arsenal Contract DUAA25-69-C- 0301 dated 3-10-69 for "Services to design and develop an automated line for assembly of Safety Adapter, Fuze, 1564...determine the line will function at the design rate of 5,000 acceptable assemblies per day and collect production data for incorporation into final...0,000 M564 Delay Arming Mechanisms of the line: Determine that the line will function at the design rate of 5,000. acceotabie asswml I es/day. Collect
-
Is Oral Health of the Sugar Mill Workers Being Compromised?
Pandita, Venisha; Patthi, Basavaraj; Singla, Ashish; Jain, Swati; Kundu, Hansa; Malhi, Ravneet; Vashishtha, Vaibhav
2015-01-01
Introduction Occupational environment has an immense influence on the general as well as oral health. The specific exposure to sugar and its byproducts might influence the dental health of sugar mill workers. Aim and Objectives The present study was conducted to assess and compare the oral health status of production line workers and administration staff working in the sugar mills of Western Uttar Pradesh. Materials and Methods A cross-sectional study was conducted in four Government aided and four Private sugar mills of West Uttar Pradesh, India among the production line workers and administration staff. Multistage random sampling methodology was employed to select total of 600 sugar mill factory workers (449 production line workers and 151 administration staff). The oral health status of the study subjects was assessed using the modified WHO Oral health survey Performa 1997. Statistical Analysis SPSS 19 Version was used for statistical analysis. Mean, Standard Deviation and proportions were calculated for each clinical parameter. Student t-test and Chi-square analysis was done to analyse inter group comparison. Results Mean DMFT for production and non production line workers was 7.67± 2.99 and 0.15 ± 1.34 (p= 0.001) respectively. 80.17% of production line workers had maximum CPI score 2 in contrast to 63.57% of administration staff (p=0.324). Conclusion The dental health was found to be debilitated among the production line workers of Sugar mill as compared to the Administrative staff. It is therefore recommended to raise the awareness among the sugar mill workers regarding the same. PMID:26266207
-
1985-12-27
8217 — told the assembled Press that* *the proposed legislation did not’. :■ cover agricultural Workers or’. i, domestic employee^ two of the I • largest...8217, isting legislation only, covers a^ j small minority öf workers,., primarily in the building,„ ,-manüfacturing and mining ’ sectors...presented to the National Assembly for debate during the current legislative , session, which began last week. However, there is no sign as yet of the
-
2003-09-02
KENNEDY SPACE CENTER, FLA. - Workers in the Columbia Debris Hangar pull items from storage containers to transfer to storage in the Vehicle Assembly Building. About 83,000 pieces were shipped to KSC during search and recovery efforts in East Texas.
-
Edimansyah, Bin Abdin; Rusli, Bin Nordin; Naing, Lin; Mohamed Rusli, Bin Abdullah; Winn, Than
2007-06-01
The present study investigates the relationship between psychosocial work factors and health-related quality of life (HRQOL) in male automotive assembly plant workers in Malaysia. A total of 728 male workers were recruited in March-July 2005 from 2 major automotive assembly plants in Selangor and Pahang. In this cross-sectional study, information on socio-demography, psychosocial work factors using the 97-item Job Content Questionnaire (JCQ) and an abbreviated 26-item version of the World Health Organization Quality of Life-Brief Version (WHOQOL-BREF) questionnaire containing 4 domains (physical health, psychological, social relationship, and environment) was self-administered to all workers involved. The prevalence of reported good or very good overall HRQOL and general health was 64.9% and 53.7%, respectively. Multiple linear regression analysis indicated that created skill was positively associated with physical health and psychological domains; whilst, skill discretion was positively associated with social relationship and environment domains. Social support was positively associated with physical health and environment domains; whilst, co-worker support was positively associated with psychological and social relationship domains. Job insecurity and hazardous condition were negatively associated with all domains, whilst psychological job demands was negatively associated with the environment domain of HRQOL.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-07
... Corporation Grand Rapids Metal Center Metal Fabricating Division Including On-Site Leased Workers From... Corporation, Grand Rapids Metal Center, Metal Fabricating Division, including on- site leased workers from... of metal stampings and sub- assembled metal sheet components. The company reports that workers leased...
-
Security warning method and system for worker safety during live-line working
NASA Astrophysics Data System (ADS)
Jiang, Chilong; Zou, Dehua; Long, Chenhai; Yang, Miao; Zhang, Zhanlong; Mei, Daojun
2017-09-01
Live-line working is an essential part in the operations in an electric power system. Live-line workers are required to wear shielding clothing. Shielding clothing, however, acts as a closed environment for the human body. Working in a closed environment for a long time can change the physiological responses of the body and even endanger personal safety. According to the typical conditions of live-line working, this study synthesizes environmental factors related to shielding clothing and the physiological factors of the body to establish the heart rate variability index RMSSD and the comprehensive security warning index SWI. On the basis of both indices, this paper proposes a security warning method and system for the safety live-line workers. The system can monitor the real-time status of workers during live-line working to provide security warning and facilitate the effective safety supervision by the live operation center during actual live-line working.
-
Di Benedetto, Raffaele; Fanti, Michele
2012-01-01
This paper wants to present an integrated approach to Line Balancing and Risk Assessment and a Software Tool named ErgoAnalysis that makes it easy to control the whole production process and produces a Risk Index for the actual work tasks in an Assembly Line. Assembly Line Balancing, or simply Line Balancing, is the problem of assigning operations to workstations along an assembly line, in such a way that the assignment be optimal in some sense. Assembly lines are characterized by production constraints and restrictions due to several aspects such as the nature of the product and the flow of orders. To be able to respond effectively to the needs of production, companies need to frequently change the workload and production models. Each manufacturing process might be quite different from another. To optimize very specific operations, assembly line balancing might utilize a number of methods and the Engineer must consider ergonomic constraints, in order to reduce the risk of WMDSs. Risk Assessment may result very expensive because the Engineer must evaluate it at every change. ErgoAnalysis can reduce cost and improve effectiveness in Risk Assessment during the Line Balancing.
-
36. ASSEMBLY LINE AREA FROM NEAR INTERIOR LOADING DOCK. VIEW ...
36. ASSEMBLY LINE AREA FROM NEAR INTERIOR LOADING DOCK. VIEW TO WEST-NORTHWEST. - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
National Association of Social Workers
... Donate Login About Staff Governance Chapters Delegate Assembly Ethics Legal NASW Press NASW Foundation NASW Assurance Services, ... Membership FAQ + About Staff Governance Chapters Delegate Assembly Ethics Legal NASW Press NASW Foundation NASW Assurance Services, ...
-
Assembling Webs of Support: Child Domestic Workers in India
ERIC Educational Resources Information Center
Wasiuzzaman, Shaziah; Wells, Karen
2010-01-01
This paper uses ethnographic and qualitative interview data with Muslim child domestic workers, their families and employers to investigate the social ties between young workers and their employers. Our analysis shows that working-class families use children's domestic work with middle-class families as part of a web of resources to protect them…
-
The modules of trans-acyltransferase assembly lines redefined with a central acyl carrier protein.
Vander Wood, Drew A; Keatinge-Clay, Adrian T
2018-06-01
Here, the term "module" is redefined for trans-acyltransferase (trans-AT) assembly lines to agree with how its domains cooperate and evolutionarily co-migrate. The key domain in both the polyketide synthase (PKS) and nonribosomal peptide synthetase (NRPS) modules of assembly lines is the acyl carrier protein (ACP). ACPs not only relay growing acyl chains through the assembly line but also collaborate with enzymes in modules, both in cis and in trans, to add a specific chemical moiety. A ketosynthase (KS) downstream of ACP often plays the role of gatekeeper, ensuring that only a single intermediate generated by the enzymes of a module is passed downstream. Bioinformatic analysis of 526 ACPs from 33 characterized trans-AT assembly lines reveals ACPs from the same module type generally clade together, reflective of the co-evolution of these domains with their cognate enzymes. While KSs downstream of ACPs from the same module type generally also clade together, KSs upstream of ACPs do not-in disagreement with the traditional definition of a module. Beyond nomenclature, the presented analysis impacts our understanding of module function, the evolution of assembly lines, pathway prediction, and assembly line engineering. © 2018 Wiley Periodicals, Inc.
-
2003-09-02
KENNEDY SPACE CENTER, FLA. - A worker in the Columbia Debris Hangar sorts bagged items of Columbia debris that will be transferred to storage in the Vehicle Assembly Building. About 83,000 pieces were shipped to KSC during search and recovery efforts in East Texas.
-
2003-09-02
KENNEDY SPACE CENTER, FLA. - Workers in the Columbia Debris Hangar move some of the STS-107 debris into boxes for transfer to storage in the Vehicle Assembly Building. About 83,000 pieces were shipped to KSC during search and recovery efforts in East Texas.
-
2003-09-02
KENNEDY SPACE CENTER, FLA. - Workers in the Columbia Debris Hangar record the first items of the STS-107 debris to be transferred to storage in the Vehicle Assembly Building. About 83,000 pieces were shipped to KSC during search and recovery efforts in East Texas.
-
Smargiassi, A; Baldwin, M; Savard, S; Kennedy, G; Mergler, D; Zayed, J
2000-10-01
Welder exposure to metals in various industrial sectors is poorly characterized. We had the opportunity to carry out an exploratory study to characterize manganese exposure in welding operations in a recently established Quebec factory that assembled accessories for heavy excavation machinery. Ten workers were sampled for total manganese for at least two consecutive days out of three followed by two consecutive days for respirable manganese (with a size selective sampler with a median cut-off of 4 microns), during a typical week in the summer of 1998. Parts being welded were characterized as large or small. Small parts were those being welded on tables during subassembly. Workers were divided into two groups according to the parts they were welding. Seventy-eight percent of the total manganese exposure levels of welding operations during the assembly of large accessories of heavy excavation machinery exceeded the manganese American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) of 0.20 mg/m3 (GM 0.24 mg/m3, n = 14) while none exceeded the TLV during the assembly of small pieces (GM 0.06 mg/m3, n = 8). Welding operations during the assembly of large heavy excavation machinery accessories may pose a significant health hazard. Considering the importance of task-related variables affecting exposure among workers, further studies are needed to better characterize exposure determinants of welding operations during the assembly of heavy excavation machinery accessories.
-
A simulation-based approach for solving assembly line balancing problem
NASA Astrophysics Data System (ADS)
Wu, Xiaoyu
2017-09-01
Assembly line balancing problem is directly related to the production efficiency, since the last century, the problem of assembly line balancing was discussed and still a lot of people are studying on this topic. In this paper, the problem of assembly line is studied by establishing the mathematical model and simulation. Firstly, the model of determing the smallest production beat under certain work station number is anysized. Based on this model, the exponential smoothing approach is applied to improve the the algorithm efficiency. After the above basic work, the gas stirling engine assembly line balancing problem is discussed as a case study. Both two algorithms are implemented using the Lingo programming environment and the simulation results demonstrate the validity of the new methods.
-
Heuristics for Multiobjective Optimization of Two-Sided Assembly Line Systems
Jawahar, N.; Ponnambalam, S. G.; Sivakumar, K.; Thangadurai, V.
2014-01-01
Products such as cars, trucks, and heavy machinery are assembled by two-sided assembly line. Assembly line balancing has significant impacts on the performance and productivity of flow line manufacturing systems and is an active research area for several decades. This paper addresses the line balancing problem of a two-sided assembly line in which the tasks are to be assigned at L side or R side or any one side (addressed as E). Two objectives, minimum number of workstations and minimum unbalance time among workstations, have been considered for balancing the assembly line. There are two approaches to solve multiobjective optimization problem: first approach combines all the objectives into a single composite function or moves all but one objective to the constraint set; second approach determines the Pareto optimal solution set. This paper proposes two heuristics to evolve optimal Pareto front for the TALBP under consideration: Enumerative Heuristic Algorithm (EHA) to handle problems of small and medium size and Simulated Annealing Algorithm (SAA) for large-sized problems. The proposed approaches are illustrated with example problems and their performances are compared with a set of test problems. PMID:24790568
-
6. SAWTOOTH WINDOW RANKS ABOVE ASSEMBLY LINES, WATER TOWER, AND ...
6. SAWTOOTH WINDOW RANKS ABOVE ASSEMBLY LINES, WATER TOWER, AND SECOND FLOOR WAREHOUSE STRUCTURE. VIEW TO SOUTH-SOUTHEAST. - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
NASA Technical Reports Server (NTRS)
1994-01-01
Lockheed Space Operations Company workers in the Extended Duration Orbiter (EDO) Facility, located inside the Vehicle Assembly Building (VAB), carefully hoist the Orbiter Docking System (ODS) from its shipping container into a test stand. The ODS was ship
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-24
... automobiles produced by the workers. The investigation also revealed that the workers did not produce a... certification. In the request for reconsideration, the International Union of United Automobile, Aerospace, and...
-
76 FR 19468 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-07
... Known As ATW Automation, Inc., Livonia Michigan TA-W-72,075A Assembly & Test Worldwide, Inc., Currently... Saginaw, Michigan locations of Assembly & Test Worldwide, Inc., are currently known as ATW Automation, Inc... Automation, Inc., Livonia, Michigan (TA-W-72,075); Assembly & Test Worldwide, Inc., currently known as ATW...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-21
...., Robinson Solutions, and Yazaki North America; Fenton, MO; Amended Certification Regarding Eligibility To... Chrysler LLC, St. Louis North Assembly Plant, Fenton, Missouri. The notice was published in the Federal... Fenton, Missouri location of Chrysler LLC, St. Louis North Assembly Plant. The Department has determined...
-
Analysis of the type II robotic mixed-model assembly line balancing problem
NASA Astrophysics Data System (ADS)
Çil, Zeynel Abidin; Mete, Süleyman; Ağpak, Kürşad
2017-06-01
In recent years, there has been an increasing trend towards using robots in production systems. Robots are used in different areas such as packaging, transportation, loading/unloading and especially assembly lines. One important step in taking advantage of robots on the assembly line is considering them while balancing the line. On the other hand, market conditions have increased the importance of mixed-model assembly lines. Therefore, in this article, the robotic mixed-model assembly line balancing problem is studied. The aim of this study is to develop a new efficient heuristic algorithm based on beam search in order to minimize the sum of cycle times over all models. In addition, mathematical models of the problem are presented for comparison. The proposed heuristic is tested on benchmark problems and compared with the optimal solutions. The results show that the algorithm is very competitive and is a promising tool for further research.
-
Electric utility pole yard training facility: Designing an effective learning environment
NASA Astrophysics Data System (ADS)
Topping, Robert P.
The primary responsibility of electric utilities is to supply consistent, dependable, and affordable energy to private customers, businesses, and industries. As with many businesses, electric utilities are experiencing the effects of an aging workforce and expending considerable resources to train their current and replacement workers. Community colleges can partner with electric utilities to provide effective learning environments for these workers, and gain access to new sources of revenue and community support for the colleges. The purpose of this study was to describe the functions, features, and major design issues of an effective learning environment for training electric utility industry workers, the electric utility line-worker pole yard. Case studies of three "state of the art" line-worker pole yard training environments provide the basis for the study's findings and implications. The study was guided by the following research questions: (1) What is the function of a line-worker pole yard in supporting effective training? (2) What are the features of present day ("state of the art") line-worker pole yard learning environments? and (3) What are the major issues that need to be addressed in designing a line-worker pole yard learning environment for the future? The study participants included industry representatives, training coordinators, instructors, and students from the three selected "state of the art" line-worker pole yard sites. The overall findings from the study resulted in composites of the desired features of learning outcomes, learning process, and learning environment for a line-worker pole yard training program and major issues that are affecting the future design of these training programs. Composite findings of a pole-yard training environment included unique features associated with: (a) outdoor, (b) indoor, (c) underground, (d) classroom, (e) gathering places, and (f) work-based learning components. Composite findings with regard to major issues that need to be considered in future designs of pole-yard training environments included: (a) available unrestricted land for expansion, (b) resource commitment level, (c) workforce demographics, (d) aging industrial infrastructure, (e) electronic information and communication capability, (f) quality and quantity of available instructors, and (g) environmental and economic impact.
-
Gay, Darren C; Wagner, Drew T; Meinke, Jessica L; Zogzas, Charles E; Gay, Glen R; Keatinge-Clay, Adrian T
2016-03-01
Polyketides such as the clinically-valuable antibacterial agent mupirocin are constructed by architecturally-sophisticated assembly lines known as trans-acyltransferase polyketide synthases. Organelle-sized megacomplexes composed of several copies of trans-acyltransferase polyketide synthase assembly lines have been observed by others through transmission electron microscopy to be located at the Bacillus subtilis plasma membrane, where the synthesis and export of the antibacterial polyketide bacillaene takes place. In this work we analyze ten crystal structures of trans-acyltransferase polyketide synthases ketosynthase domains, seven of which are reported here for the first time, to characterize a motif capable of zippering assembly lines into a megacomplex. While each of the three-helix LINKS (Laterally-INteracting Ketosynthase Sequence) motifs is observed to similarly dock with a spatially-reversed copy of itself through hydrophobic and ionic interactions, the amino acid sequences of this motif are not conserved. Such a code is appropriate for mediating homotypic contacts between assembly lines to ensure the ordered self-assembly of a noncovalent, yet tightly-knit, enzymatic network. LINKS-mediated lateral interactions would also have the effect of bolstering the vertical association of the polypeptides that comprise a polyketide synthase assembly line. Copyright © 2015 Elsevier Inc. All rights reserved.
-
Gay, Darren C.; Wagner, Drew T.; Meinke, Jessica L.; Zogzas, Charles E.; Gay, Glen R.; Keatinge-Clay, Adrian T.
2016-01-01
Polyketides such as the clinically-valuable antibacterial agent mupirocin are constructed by architecturally-sophisticated assembly lines known as trans-acyltransferase polyketide synthases. Organelle-sized megacomplexes composed of several copies of trans-acyltransferase polyketide synthase assembly lines have been observed by others through transmission electron microscopy to be located at the Bacillus subtilis plasma membrane, where the synthesis and export of the antibacterial polyketide bacillaene takes place. In this work we analyze ten crystal structures of trans-acyltransferase polyketide synthases ketosynthase domains, seven of which are reported here for the first time, to characterize a motif capable of zippering assembly lines into a megacomplex. While each of the three-helix LINKS (Laterally-INteracting Ketosynthase Sequence) motifs is observed to similarly dock with a spatially-reversed copy of itself through hydrophobic and ionic interactions, the amino acid sequences of this motif are not conserved. Such a code is appropriate for mediating homotypic contacts between assembly lines to ensure the ordered self-assembly of a noncovalent, yet tightly-knit, enzymatic network. LINKS-mediated lateral interactions would also have the effect of bolstering the vertical association of the polypeptides that comprise a polyketide synthase assembly line. PMID:26724270
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-30
... production of metal automotive stampings, a substantial proportion of which are shipped to an affiliated plant where they are used in the assembly of automotive vehicles. New information shows that workers...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-12
..., Adecco Employment Services, Winchester, KY; Niles America Wintech, Inc., Assembly and Testing Division, a... former workers of Niles America Wintech, Inc., Warehousing Division and Assembly and Testing Division...
-
1969-01-01
In one of the initial assembly steps for the Saturn IB launch vehicle's S-IB (first) stage, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, complete the lower shroud assembly. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized the eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.
-
5. INTERIOR VIEW, LOOKING WEST, ALONG ASSEMBLY LINE WITH WELDING ...
5. INTERIOR VIEW, LOOKING WEST, ALONG ASSEMBLY LINE WITH WELDING OF THE HOPPER SIDE AND GATE FRAMES, THE FIRST ASSEMBLY OF THE SUBASSEMBLIES. STEEL FRAME (TOP OF PHOTOGRAPH) CALLED THE 'HIGHLINE,' HOLDS CRANES AND EQUIPMENT NEEDED FOR RAIL CAR ASSEMBLY. - Pullman Standard Company Plant, Fabrication Assembly Shop, 401 North Twenty-fourth Street, Bessemer, Jefferson County, AL
-
2016-12-16
Construction workers wearing safety harnesses and tethered lines assist with the installation of the second half of the B-level work platforms, B north, for NASA’s Space Launch System (SLS) rocket, high up in the Vehicle Assembly Building (VAB) at NASA’s Kennedy Space Center in Florida. They are securing the large bolts that hold the platform securely in place on the north side of High Bay 3. The B platforms are the ninth of 10 levels of work platforms that will surround and provide access to the SLS rocket and Orion spacecraft for Exploration Mission 1. The Ground Systems Development and Operations Program is overseeing upgrades and modifications to VAB High Bay 3, including installation of the new work platforms, to prepare for NASA’s Journey to Mars.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-29
..., Corrigan Company, and Murphy Company, Fenton, MO; Amended Certification Regarding Eligibility To Apply for... of Chrysler LLC, St. Louis South Assembly Division, Fenton, Missouri. The notice was published in the... employed on-site by the Fenton, Missouri location of Chrysler LLC, St. Louis South Assembly Division. The...
-
ERIC Educational Resources Information Center
Adler, Paul S.
1993-01-01
A General Motors-Toyota auto assembly plant demonstrates how hierarchy and standardization can improve productivity and motivate workers. The production system is strongly committed to the social context of work and focused on standards designed by workers themselves, giving continuous improvement a specific foundation. (SK)
-
The promise of Lean in health care.
Toussaint, John S; Berry, Leonard L
2013-01-01
An urgent need in American health care is improving quality and efficiency while controlling costs. One promising management approach implemented by some leading health care institutions is Lean, a quality improvement philosophy and set of principles originated by the Toyota Motor Company. Health care cases reveal that Lean is as applicable in complex knowledge work as it is in assembly-line manufacturing. When well executed, Lean transforms how an organization works and creates an insatiable quest for improvement. In this article, we define Lean and present 6 principles that constitute the essential dynamic of Lean management: attitude of continuous improvement, value creation, unity of purpose, respect for front-line workers, visual tracking, and flexible regimentation. Health care case studies illustrate each principle. The goal of this article is to provide a template for health care leaders to use in considering the implementation of the Lean management system or in assessing the current state of implementation in their organizations. Copyright © 2013 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.
-
Muzammil, Mohammad; Ahmad, Saman; Khan, Abid Ali; Hasan, Faisal
2011-01-01
An experimental research was conducted to design a workstation for a lock manufacturing assembly. Two experiments were conducted in the present study. Nine male subjects in the age range of 18-35 years participated in the first experiment. For the second experiment, nine subjects in each of the three age groups (viz. 17-22, 23-28 and 29-35 years) volunteered for experimental investigations. The designed workstation was evaluated under varying levels of noise and illumination for workers of different age groups. Three different workstations were evaluated. The task was performed by a worker in two different sitting positions and three settings of arms position. It was found that workstation type, backrest support and arms positions were all having a statistically significant effect on task performance. Workstation with work surface to seat height ratio of 1.82 was found to be better when the task was performed using backrest and arms were supported on the work surface. This workstation was evaluated for three different age groups of workers under different levels of noise and illumination. The results of the study showed that age of the worker, illumination level and level of noise were all contributing significantly towards task performance. The design of a workstation for assembly task would help greatly in creating a better working environment and enhancing the productivity of workers exposed to environmental stressors like noise and illumination. © 2011 - IOS Press and the authors. All rights reserved
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vuckovich, M.; Burkett, J. P.; Sallustio, J.
1984-12-11
Fuel assemblies of a nuclear reactor are transferred during fueling or refueling or the like by a crane. The work-engaging fixture of the crane picks up an assembly, removes it from this slot, transfers it to the deposit site and deposits it in its slot at the deposit site. The control for the crane includes a strain gauge connected to the crane line which raises and lowers the load. The strain gauge senses the load on the crane. The signal from the strain gauge is compared with setpoints; a high-level setpoint, a low-level setpoint and a slack-line setpoint. If themore » strain gauge signal exceeds the high-level setpoint, the line drive is disabled. This event may occur during raising of a fuel assembly which encounters resistance. The high-level setpoint may be overridden under proper precautions. The line drive is also disabled if the strain gauge signal is less than the low-level setpoint. This event occurs when a fuel assembly being deposited contacts the bottom of its slot or an obstruction in, or at the entry to the slot. To preclude lateral movement and possible damage to a fuel assembly suspended from the crane line, the traverse drive of the crane is disabled once the strain-gauge exceets the lov-level setpoint. The traverse drive can only be enabled after the strain-gauge signal is less than the slack-line set-point. This occurs when the lines has been set in slack-line setting. When the line is tensioned after slack-li ne setting, the traverse drive remains enabled only if the line has been disconnected from the fuel assembly.« less
-
40 CFR 1060.102 - What permeation emission control requirements apply for fuel lines?
Code of Federal Regulations, 2011 CFR
2011-07-01
... assemblies as aggregated systems that include multiple sections of fuel line with connectors and fittings. For example, you may certify fuel lines for portable marine fuel tanks as assemblies of fuel hose, primer bulbs, and self-sealing end connections. The length of such an assembly must not be longer than a...
-
40 CFR 1060.102 - What permeation emission control requirements apply for fuel lines?
Code of Federal Regulations, 2010 CFR
2010-07-01
... assemblies as aggregated systems that include multiple sections of fuel line with connectors and fittings. For example, you may certify fuel lines for portable marine fuel tanks as assemblies of fuel hose, primer bulbs, and self-sealing end connections. The length of such an assembly must not be longer than a...
-
Asthma-like symptoms, atopy, and bronchial responsiveness in furniture workers.
Talini, D; Monteverdi, A; Benvenuti, A; Petrozzino, M; Di Pede, F; Lemmi, M; Carletti, A; Macchioni, P; Serretti, N; Viegi, G; Paggiaro, P
1998-11-01
To study the role of individual and occupational risk factors for asthma in furniture workers. 296 workers were examined (258 men, 38 women) with a questionnaire of respiratory symptoms and diseases, baseline spirometry, bronchial provocative test with methacholine, and skin prick tests. Non-specific bronchial hyperreactivity was defined as when a provocative dose with a fall of 20% in forced expiratory volume in 1 second (PD20FEV1) was < 0.8 mg and atopy in the presence of at least one positive response to skin prick tests. Workers were subdivided into spray painters (exposed to low concentrations of diisocyanates and solvents), woodworkers (exposed to wood dusts), and assemblers (control group). The prevalences of attacks of shortness of breath with wheezing and dyspnoea were higher in spray painters (13.5% and 11.5% respectively) than in woodworkers (7.7% and 6.3%) or in assemblers (1.6% and 1.6%); prevalences of chronic cough, asthma, and rhinitis were also slightly but not significantly higher in spray painters and in woodworkers than in assemblers. The difference in the prevalence of respiratory symptoms among the job titles was due to the atopic subjects, who showed a higher prevalence of chronic cough, wheeze, shortness of breath with wheeze, dyspnoea, and asthma in spray painters than in the other groups. The prevalence of non-specific bronchial hyperreactivity in subjects who performed bronchial provocative tests was 17.7%, with no significant difference among groups. Asthma symptoms were significantly associated with non-specific bronchial hyperreactivity. Asthma-like symptoms plus non-specific bronchial hyperreactivity was found in 4% of assemblers, 10% of woodworkers, and 13.3% of spray painters (chi 2 = 2.6, NS). Multiple logistic analysis taking into account individual (smoke, atopy, age) and occupational (job titles) risk factors confirmed that spray painters had higher prevalence of chronic cough than assemblers, and a trend in increasing the prevalence of shortness of breath with wheeze, dyspnoea, and asthma. Painters in the furniture industry, particularly atopic subjects, are at higher risk of asthma-like symptoms than other job titles. In these workers asthma-like symptoms are more sensitive than non-specific bronchial hyperreactivity in detecting a negative effect of the occupational exposure.
-
Electrical burn injuries of workers using portable aluminium ladders near overhead power lines.
Moghtader, J C; Himel, H N; Demun, E M; Bellian, K T; Edlich, R F
1993-10-01
The use of aluminium ladders around high voltage power lines has resulted in a significant number of electrical injuries and electrocutions. Workers often misjudge wire distances or lose control of fully extended ladders, thereby exposing themselves to electrocution hazard. High-voltage electrical burns of two workers using an aluminium ladder that contacted a high voltage power line are reported. The circumstances surrounding the injury, the clinical management of the case, and the methods of prevention are presented and discussed.
-
Meta-heuristic algorithm to solve two-sided assembly line balancing problems
NASA Astrophysics Data System (ADS)
Wirawan, A. D.; Maruf, A.
2016-02-01
Two-sided assembly line is a set of sequential workstations where task operations can be performed at two sides of the line. This type of line is commonly used for the assembly of large-sized products: cars, buses, and trucks. This paper propose a Decoding Algorithm with Teaching-Learning Based Optimization (TLBO), a recently developed nature-inspired search method to solve the two-sided assembly line balancing problem (TALBP). The algorithm aims to minimize the number of mated-workstations for the given cycle time without violating the synchronization constraints. The correlation between the input parameters and the emergence point of objective function value is tested using scenarios generated by design of experiments. A two-sided assembly line operated in an Indonesia's multinational manufacturing company is considered as the object of this paper. The result of the proposed algorithm shows reduction of workstations and indicates that there is negative correlation between the emergence point of objective function value and the size of population used.
-
Internal Aspects of the Skill Transfer of Manual Assembly Work
ERIC Educational Resources Information Center
Doyo, Daisuke
2009-01-01
In manual assembly work, parts are often assembled by applying force with a simple tool or by hand. A worker thus needs control the force he or she applies in working, as an appropriate level of force is requisite for minimizing work failures and improving efficiency. The object of this study is to clarify the relationship between the level of…
-
1969-01-01
Workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, hoist the thrust structure assembly for the Saturn IB S-IB (first) stage. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.
-
Colombini, Daniela; Occhipinti, E
2004-01-01
This presents study the results of a number of investigations regarding risks associated with biomechanical overload of the upper limbs and the consequent health effects (UL-WMSDs) in a large sample of workers in various different jobs. Risk assessment regarded 15 different working environments in which 4044 subjects were employed. Most were metalworking factories in which the workers performed assembly tasks (3015 workers). Some made motors for electrical appliances (714 workers), others assembled miniature components (shock absorbers and remote controls: 259 workers), while others handled larger sized parts such as components of large domestic appliances (refrigerators, freezers, ovens: 2037 workers). The sample also included workers in the meat processing industry (chicken and turkey, 969 workers) and hotel room cleaners (60). Exposure assessment was performed using the OCRA checklist for quantifying the risk attributable intrinsically to each individual workstation, as if used for the entire shift. The values thus obtained were entered into a special software program that, for each working area, produced mean weighted values for the results of the checklist and their percentage distribution over four categories: no risk (green), low risk (yellow), moderate risk (red) and high risk (purple). In 11 of the 15 working environments considered, a total of 3511 workers (2221 women and 1290 men) underwent a complete and standardized clinical examination of the upper limbs. Comparisons of the results of exposure evaluation and of the clinical surveys were made between the different types of jobs and between males and females.
-
29 CFR 1926.1407 - Power line safety (up to 350 kV)-assembly and disassembly.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 29 Labor 8 2014-07-01 2014-07-01 false Power line safety (up to 350 kV)-assembly and disassembly. 1926.1407 Section 1926.1407 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Cranes and Derricks in Construction § 1926.1407 Power line safety (up to 350 kV)—assembly and disassembly...
-
Workers in the VAB move sling into place to lift Columbia to mobile launcher
NASA Technical Reports Server (NTRS)
1982-01-01
Workers in the Vehicle Assembly Building (VAB) move a specially-built sling into place to lift Orbiter Columbia from the transfer aisle to the mobile launcher platform (27015); Columbia is lifted from the floor of the VAB transfer aisle (27016).
-
Continuous pressure letdown system
Sprouse, Kenneth M.; Matthews, David R.; Langowski, Terry
2010-06-08
A continuous pressure letdown system connected to a hopper decreases a pressure of a 2-phase (gas and solid) dusty gas stream flowing through the system. The system includes a discharge line for receiving the dusty gas from the hopper, a valve, a cascade nozzle assembly positioned downstream of the discharge line, a purge ring, an inert gas supply connected to the purge ring, an inert gas throttle, and a filter. The valve connects the hopper to the discharge line and controls introduction of the dusty gas stream into the discharge line. The purge ring is connected between the discharge line and the cascade nozzle assembly. The inert gas throttle controls a flow rate of an inert gas into the cascade nozzle assembly. The filter is connected downstream of the cascade nozzle assembly.
-
1998-10-03
KENNEDY SPACE CENTER, FLA. -- Inside the payload bay of Space Shuttle orbiter Endeavour, workers and STS-88 crew members on a movable work platform or bucket move closer to the rear of the orbiter's crew compartment. While Endeavour is being prepared for flight inside Orbiter Processing Facility Bay 1, the STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT) to familiarize themselves with the orbiter's midbody and crew compartments. A KSC worker (left) maneuvers the platform to give Mission Specialists Jerry L. Ross and James H. Newman (right) a closer look. Looking on is Wayne Wedlake of United Space Alliance at Johnson Space Center. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. After the mating, Ross and Newman are scheduled to perform three spacewalks to connect power, data and utility lines and install exterior equipment. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya; PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability
-
Inaba, Ryoichi; Kurokawa, Junichi; Mirbod, Seyed Mohammad
2009-07-01
To help making comfortable workplaces and to prevent health disorders induced by the exposure to moderate cold in two different groups of out-door workers, we conducted a survey to compare subjective symptoms and cold prevention measures in winter between traffic control workers and construction workers. The subjects of this study were 98 male traffic control workers and 149 male workers engaged in building construction. Work loads of traffic control workers and construction workers were estimated at RMR1-2 and RMR2-4, respectively. All subjects were asked to complete a self-administered questionnaire covering age, occupational career, working figure, present illness, past history of diseases, individual preventive measures to the cold, subjective symptoms in the winter (43 items) and subjective symptoms occurred during daytime working in the winter (6 items). In two parts of the construction workplaces (the place where a morning assembly was held and on the 7th floor of the construction site) dry bulb, wet bulb and globe temperatures were measured in January. Windchill Index (kcal/cm,(2) x h) was calculated by the measured dry bulb temperature and wind velocity. Mean values of dry bulb temperature between 9:00 and 16:30 in the place where a morning assembly was held for three days were between 4.8 +/- 1.2 degrees C at 9:00 am and 9.3 +/- 1.1 degrees C at noon. Mean values of Windchill Index in the place where a morning assembly was held were between 490.8+/-23.9 kcal/cm(2) x h at 9:30 am and 608.2+/-47.3 kcal/cm(2) x h at 2:30 pm. Occupational career, monthly working days, daily working hours, one way commuting hours, and daily smoking numbers of the traffic control workers were significantly shorter than the construction workers (p<0.01). There were no significant differences in the prevalence of chillness in the arms and legs between the traffic control workers (5.1%) and the construction workers (0.7%). Prevalence of wearing a warm underwear, body warmer, warm trousers, underpants, warm socks, shoe warmer and muffler in the traffic control workers were significantly higher than the construction workers. The subjective symptoms in winter complained most frequently were shoulder stiffness (51.0%), finger cold sensation (50.0%) and neck stiffness (48.0%) in the traffic control workers, and were easy to get fatigued (49.0%), lumbago (48.3%) and finger cold sensation (47.7%) in the construction workers. On the basis of the results obtained, it is clearly shown that the two groups are at the risk of disorders due to their working environment. Therefore, these workers are needed to undergo occupational health programs for prevention of cold exposure disorders. Applications of preventive countermeasures for both groups are discussed.
-
NASA Astrophysics Data System (ADS)
Chen, Jie; Hu, Jiangnan
2017-06-01
Industry 4.0 and lean production has become the focus of manufacturing. A current issue is to analyse the performance of the assembly line balancing. This study focus on distinguishing the factors influencing the assembly line balancing. The one-way ANOVA method is applied to explore the significant degree of distinguished factors. And regression model is built to find key points. The maximal task time (tmax ), the quantity of tasks (n), and degree of convergence of precedence graph (conv) are critical for the performance of assembly line balancing. The conclusion will do a favor to the lean production in the manufacturing.
-
2008-11-06
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building high bay 4 at NASA's Kennedy Space Center in Florida, workers from NASA's Glenn Research Center remove the blue shrink-wrapped covers on these Ares I-X upper stage simulator segments. The protective covers were used for shipping. The upper stage simulator will be used in the test flight identified as Ares I-X in 2009. The segments will simulate the mass and the outer mold line and will be more than 100 feet of the total vehicle height of 327 feet. The simulator comprises 11 segments that are approximately 18 feet in diameter. Most of the segments will be approximately 10 feet high, ranging in weight from 18,000 to 60,000 pounds, for a total of approximately 450,000 pounds. Photo credit: NASA/Troy Cryder
-
2008-11-06
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building high bay 4 at NASA's Kennedy Space Center in Florida, workers from NASA's Glenn Research Center remove the blue shrink-wrapped covers on these Ares I-X upper stage simulator segments. The protective covers were used for shipping. The upper stage simulator will be used in the test flight identified as Ares I-X in 2009. The segments will simulate the mass and the outer mold line and will be more than 100 feet of the total vehicle height of 327 feet. The simulator comprises 11 segments that are approximately 18 feet in diameter. Most of the segments will be approximately 10 feet high, ranging in weight from 18,000 to 60,000 pounds, for a total of approximately 450,000 pounds. Photo credit: NASA/Troy Cryder
-
2008-11-06
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building high bay 4 at NASA's Kennedy Space Center in Florida, workers from NASA's Glenn Research Center remove the blue shrink-wrapped covers on these Ares I-X upper stage simulator segments. The protective covers were used for shipping. The upper stage simulator will be used in the test flight identified as Ares I-X in 2009. The segments will simulate the mass and the outer mold line and will be more than 100 feet of the total vehicle height of 327 feet. The simulator comprises 11 segments that are approximately 18 feet in diameter. Most of the segments will be approximately 10 feet high, ranging in weight from 18,000 to 60,000 pounds, for a total of approximately 450,000 pounds. Photo credit: NASA/Troy Cryder
-
2008-11-06
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building high bay 4 at NASA's Kennedy Space Center in Florida, workers from NASA's Glenn Research Center remove the blue shrink-wrapped covers on these Ares I-X upper stage simulator segments. The protective covers were used for shipping. The upper stage simulator will be used in the test flight identified as Ares I-X in 2009. The segments will simulate the mass and the outer mold line and will be more than 100 feet of the total vehicle height of 327 feet. The simulator comprises 11 segments that are approximately 18 feet in diameter. Most of the segments will be approximately 10 feet high, ranging in weight from 18,000 to 60,000 pounds, for a total of approximately 450,000 pounds. Photo credit: NASA/Troy Cryder
-
Mihailidis, A; Melonis, M; Keyfitz, R; Lanning, M; Van Vuuren, S; Bodine, C
2016-10-01
This paper presents a new cognitive assistive technology, nonlinear contextually aware prompting system (N-CAPS) that uses advanced sensing and artificial intelligence to monitor and provide assistance to workers with cognitive disabilities during a factory assembly task. The N-CAPS system was designed through the application of various computer vision and artificial intelligence algorithms that allows the system to track a user during a specific assembly task, and then provide verbal and visual prompts to the worker as needed. A pilot study was completed with the N-CAPS solution in order to investigate whether it was an appropriate intervention. Four participants completed the required assembly task five different times, using the N-CAPS system. The participants completed all of the trials that they attempted with 85.7% of the steps completed without assistance from the job coach. Of the 85.7% of steps completed independently, 32.5% of these were completed in response to prompts given by N-CAPS. Overall system accuracy was 83.3%, the overall sensitivity was 86.2% and the overall specificity was 82.4%. The results from the study were positive in that they showed that this type of technology does have merit with this population. Implications for Rehabilitation It provides a concise summary of the importance of work in the lives of people with intellectual disabilities and how technology can support this life goal. It describes the first artificially intelligent system designed to support workers with intellectually disabilities. It provides evidence that individuals with intellectual disabilities can perform a work task in response to technology.
-
Transportation of part supply improvement in agricultural machinery assembly plant
NASA Astrophysics Data System (ADS)
Saysaman, Anusit; Chutima, Parames
2018-02-01
This research focused on the problem caused by the transportation of part supply in agricultural machinery assembly plant in Thailand, which is one of the processes that are critical to the whole production process. If poorly managed, it will affect transportation of part supply, the emergence of sink cost, quality problems, and the ability to respond to the needs of the customers in time. Since the competition in the agricultural machinery market is more intense, the efficiency of part transportation process has to be improved. In this study, the process of transporting parts of the plant was studied and it was found that the efficiency of the process of transporting parts from the sub assembly line to its main assembly line was 83%. The approach to the performance improvement is done by using the Lean tool to limit wastes based on the ECRS principle and applying pull production system by changing the transportation method to operate as milkrun for transportation of parts to synchronize with the part demands of the main assembly line. After the transportation of parts from sub-assembly line to the main assembly line was improved, the efficiency raised to 98% and transportation process cost was saved to 540,000 Baht per year.
-
50. Photograph of a line drawing. 'AREA B, GENERAL ASSEMBLY, ...
50. Photograph of a line drawing. 'AREA B, GENERAL ASSEMBLY, BUILDINGS I, J, L, & M - LINES 9 & 10.' Holston Army Ammunition Plant. March 13, 1967; revised November 15, 1967, January 3, 1968. Delineator: Unknown. Drawing # 7651-1009.454. - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN
-
1969-01-01
In one of the initial assembly steps for the Saturn IB launch vehicle's S-IB (first) stage, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, position the thrust structure. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.
-
1969-01-01
In one of the initial assembly steps for the Saturn IB launch vehicle's S-IB (first) stage, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, complete the thrust structure. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.
-
Particle Line Assembly/Patterning by Microfluidic AC Electroosmosis
NASA Astrophysics Data System (ADS)
Lian, Meng; Islam, Nazmul; Wu, Jie
2006-04-01
Recently AC electroosmosis has attracted research interests worldwide. This paper is the first to investigate particle line assembly/patterning by AC electroosmosis. Since AC electroosmotic force has no dependence on particle sizes, this technique is particularly useful for manipulating nanoscale substance, and hopefully constructs functional nanoscale devices. Two types of ACEO devices, in the configurations of planar interdigitated electrodes and parallel plate electrodes, and a biased ACEO technique are studied, which provides added flexibility in particle manipulation and line assembly. The paper also investigates the effects of electrical field distributions on generating microflows for particle assembly. The results are corroborated experimentally.
-
Assembly line performance and modeling
NASA Astrophysics Data System (ADS)
Rane, Arun B.; Sunnapwar, Vivek K.
2017-09-01
Automobile sector forms the backbone of manufacturing sector. Vehicle assembly line is important section in automobile plant where repetitive tasks are performed one after another at different workstations. In this thesis, a methodology is proposed to reduce cycle time and time loss due to important factors like equipment failure, shortage of inventory, absenteeism, set-up, material handling, rejection and fatigue to improve output within given cost constraints. Various relationships between these factors, corresponding cost and output are established by scientific approach. This methodology is validated in three different vehicle assembly plants. Proposed methodology may help practitioners to optimize the assembly line using lean techniques.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-22
... announced below concerns Cooperative Agreement on Occupational Health with the World Health Organization (WHO): Implementing World Health Assembly Resolution 60.26 Global Plan of Action for Workers Health... Occupational Health with the World Health Organization (WHO): Implementing World Health Assembly Resolution 60...
-
Asthma-like symptoms, atopy, and bronchial responsiveness in furniture workers
Talini, D.; Monteverdi, A.; Benvenuti, A.; Petrozzino, M.; Di, P; Lemmi, M.; Carletti, A.; Macchioni, P.; Serretti, N.; Viegi, G.; Paggiaro, P.
1998-01-01
OBJECTIVES: To study the role of individual and occupational risk factors for asthma in furniture workers. METHODS: 296 workers were examined (258 men, 38 women) with a questionnaire of respiratory symptoms and diseases, baseline spirometry, bronchial provocative test with methacholine, and skin prick tests. Non-specific bronchial hyperreactivity was defined as when a provocative dose with a fall of 20% in forced expiratory volume in 1 second (PD20FEV1) was < 0.8 mg and atopy in the presence of at least one positive response to skin prick tests. Workers were subdivided into spray painters (exposed to low concentrations of diisocyanates and solvents), woodworkers (exposed to wood dusts), and assemblers (control group). RESULTS: The prevalences of attacks of shortness of breath with wheezing and dyspnoea were higher in spray painters (13.5% and 11.5% respectively) than in woodworkers (7.7% and 6.3%) or in assemblers (1.6% and 1.6%); prevalences of chronic cough, asthma, and rhinitis were also slightly but not significantly higher in spray painters and in woodworkers than in assemblers. The difference in the prevalence of respiratory symptoms among the job titles was due to the atopic subjects, who showed a higher prevalence of chronic cough, wheeze, shortness of breath with wheeze, dyspnoea, and asthma in spray painters than in the other groups. The prevalence of non-specific bronchial hyperreactivity in subjects who performed bronchial provocative tests was 17.7%, with no significant difference among groups. Asthma symptoms were significantly associated with non-specific bronchial hyperreactivity. Asthma-like symptoms plus non-specific bronchial hyperreactivity was found in 4% of assemblers, 10% of woodworkers, and 13.3% of spray painters (chi 2 = 2.6, NS). Multiple logistic analysis taking into account individual (smoke, atopy, age) and occupational (job titles) risk factors confirmed that spray painters had higher prevalence of chronic cough than assemblers, and a trend in increasing the prevalence of shortness of breath with wheeze, dyspnoea, and asthma. CONCLUSIONS: Painters in the furniture industry, particularly atopic subjects, are at higher risk of asthma-like symptoms than other job titles. In these workers asthma-like symptoms are more sensitive than non-specific bronchial hyperreactivity in detecting a negative effect of the occupational exposure. PMID:9924457
-
77 FR 50054 - Airworthiness Directives; Cessna Aircraft Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-20
... rubbing against the right steering tube assembly during full rudder pedal actuation. This proposed AD would require you to inspect the fuel return line assembly for chafing; replace the fuel return line... right steering tube assembly and the airplane structure; and adjustment as necessary. We are proposing...
-
77 FR 72250 - Airworthiness Directives; Cessna Aircraft Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-05
... rubbing against the right steering tube assembly during rudder pedal actuation. This proposed AD would require you to install the forward and aft fuel return line support clamps and brackets; inspect for a minimum clearance between the fuel return line assembly and the steering tube assembly and clearance...
-
DETAIL VIEW ABOVE THE MAIN ASSEMBLY LEVEL SHOWING HOIST AT ...
DETAIL VIEW ABOVE THE MAIN ASSEMBLY LEVEL SHOWING HOIST AT COLUMN LINE U-6 USED FOR LIFTING WING COMPONENTS FROM THE WING ASSEMBLY ANNEX TO THE B-29 PRODUCTION LINE. - Offutt Air Force Base, Glenn L. Martin-Nebraska Bomber Plant, Building D, Peacekeeper Drive, Bellevue, Sarpy County, NE
-
Penicillin dust exposure and penicillin resistance among pharmaceutical workers in Tehran, Iran.
Farshad, Ali Asghar; Enferadi, Mojtaba; Bakand, Shahnaz; Jamshidi Orak, Rouhangiz; Mirkazemi, Roksana
2016-07-01
Antimicrobial resistance (AMR) adversely impacts the prevention and treatment of a wide range of infections and is considered as a serious threat to global public health. Occupational-related AMR is a neglected area of research. To assess exposure to penicillin dust, penicillin active materials, and to report the frequency of penicillin resistance among pharmaceutical workers in Tehran, Iran. A quasi-experimental study was conducted among workers on a penicillin production line in a pharmaceutical company (n = 60) and workers in a food producing company (n = 60). Data were collected via survey, air sampling, and throat swab. The mean overall concentrations of penicillin dust and penicillin active material were 6.6 and 4.3 mg/m 3 , respectively, in the pharmaceutical industry. Streptococcus pneumoniae (S. pneumoniae) was detected in 45% (27) individuals in the exposed group, 92.6% of which showed penicillin resistance. Resistance was significantly higher among workers in penicillin production line (p = 0.014). High level of AMR among workers in penicillin production line is a health risk for the workers as well as society as a whole through the spread of drug resistant micro-organisms.
-
Penicillin dust exposure and penicillin resistance among pharmaceutical workers in Tehran, Iran
Farshad, Ali Asghar; Enferadi, Mojtaba; Bakand, Shahnaz; Jamshidi Orak, Rouhangiz; Mirkazemi, Roksana
2016-01-01
Background Antimicrobial resistance (AMR) adversely impacts the prevention and treatment of a wide range of infections and is considered as a serious threat to global public health. Occupational-related AMR is a neglected area of research. Objective To assess exposure to penicillin dust, penicillin active materials, and to report the frequency of penicillin resistance among pharmaceutical workers in Tehran, Iran. Methods A quasi-experimental study was conducted among workers on a penicillin production line in a pharmaceutical company (n = 60) and workers in a food producing company (n = 60). Data were collected via survey, air sampling, and throat swab. Results The mean overall concentrations of penicillin dust and penicillin active material were 6.6 and 4.3 mg/m3, respectively, in the pharmaceutical industry. Streptococcus pneumoniae (S. pneumoniae) was detected in 45% (27) individuals in the exposed group, 92.6% of which showed penicillin resistance. Resistance was significantly higher among workers in penicillin production line (p = 0.014). Conclusions High level of AMR among workers in penicillin production line is a health risk for the workers as well as society as a whole through the spread of drug resistant micro-organisms. PMID:27388022
-
NASA Astrophysics Data System (ADS)
Pries, V. V.; Proskuriakov, N. E.
2018-04-01
To control the assembly quality of multi-element mass-produced products on automatic rotor lines, control methods with operational feedback are required. However, due to possible failures in the operation of the devices and systems of automatic rotor line, there is always a real probability of getting defective (incomplete) products into the output process stream. Therefore, a continuous sampling control of the products completeness, based on the use of statistical methods, remains an important element in managing the quality of assembly of multi-element mass products on automatic rotor lines. The feature of continuous sampling control of the multi-element products completeness in the assembly process is its breaking sort, which excludes the possibility of returning component parts after sampling control to the process stream and leads to a decrease in the actual productivity of the assembly equipment. Therefore, the use of statistical procedures for continuous sampling control of the multi-element products completeness when assembled on automatic rotor lines requires the use of such sampling plans that ensure a minimum size of control samples. Comparison of the values of the limit of the average output defect level for the continuous sampling plan (CSP) and for the automated continuous sampling plan (ACSP) shows the possibility of providing lower limit values for the average output defects level using the ACSP-1. Also, the average sample size when using the ACSP-1 plan is less than when using the CSP-1 plan. Thus, the application of statistical methods in the assembly quality management of multi-element products on automatic rotor lines, involving the use of proposed plans and methods for continuous selective control, will allow to automating sampling control procedures and the required level of quality of assembled products while minimizing sample size.
-
Training Factory Workers: Three Case Studies. Contractor Report.
ERIC Educational Resources Information Center
Hirschhorn, Larry D.
Case studies examined the context and impact of training in three factories: a bakery, a circuit assembly plant, and a plant that produces microchips. Cookie-Foods, Inc. used Statistical Process Control (SPC) and a course on problem solving to increase the operators' productivity. Impact of the SPC program was limited, because workers who…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-12
... Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and Toyota Motor Corporation... United Motor Manufacturing, Inc., formerly a joint venture of General Motors Corporation and Toyota Motor... reviewed the certification for workers of the subject firm. The workers assemble the Toyota Corolla and the...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-25
... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,971] ASC Machine Tools, Inc... workers and former workers of ASC Machine Tools, Inc., Spokane Valley, Washington (the subject firm). The... cut metal, including assembled equipment, component parts of equipment, and spare parts. The negative...
-
[Occupational differences in exposure to hazardous work conditions].
Marinacci, Chiara; d'Errico, A; Cardano, M; Perini, F; Costa, G
2005-01-01
Few studies have been aimed at describing organizational and psychosocial conditions of the Italian workforce by occupational group, and they have been mainly conducted within specific occupations. The present study aimed at identifying specific groups of occupations which have unfavourable profiles from the point of view of exposure to specific organizational factors and psychosocial risks, and to physical, chemical and ergonomic risks, and analyzing their distribution by worker age. The analysis was conducted on a sample of 4,195 workers in the Piedmont Region who were members of the CGIL Trade Union (Italian General Confederation of Labour), who answered a self-administered questionnaire in 2000, aimed at assessing chemical, physical, and ergonomic risks, accidents, and psychosocial factors connected with work organization and work tasks. Psychosocial risks were assessed via three scales aimed at measuring the degree of control, psychophysical demands, and worker satisfaction. The proportion of workers exposed to the above mentioned risks was analysed according to occupational group. This group was then compared with all other groups taken together, according to prevalence of high strain condition (combination of high demand and low control) and HSUR condition (High Strain Unfairly Rewarded; combination of high strain and low satisfaction). Among males aged 25-44 years, restricted to the occupation groups with more than ten workers in high strain condition, significantly higher proportions of stress were observed in leather workers and shoemakers, paper factory workers, rubber workers, crane and bridge crane operators, plastic workers, painters, transport drivers and carpenters. For many of these groups, excesses were confirmed for the HSUR condition. Among subjects aged over 44 years, a higher risk for high strain was confirmed in rubber workers, transport drivers and carpenters. In addition, machine tool operators, assembly line and mechanical workers in this age group were exposed to higher risk of stress. In younger women there was a significantly higher risk of both high strain and HSUR conditions in workers employed in the rubber, plastic and the food industries, and in machine tool workers. Such excess risk was confirmed in the latter three categories also among older women. In general, the proportion of male workers classified as working in high strain conditions decreased as age increased, while in women it remained stable. The study allowed evaluation of the differential impact of exposure to physical, chemical, and psychosocial risk factors among occupational groups, thus contributing to the identification and classification of exhausting jobs. The results further showed, particularly among men, a smaller proportion of older workers, compared to younger ones, exposed to harmful physical, chemical, ergonomic and psychosocial conditions, indicating a possible propensity of companies to adapt workplace conditions, organization and internal mobility to worker age.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Aoki, Kenji
A read/write head for a magnetic tape includes an elongated chip assembly and a tape running surface formed in the longitudinal direction of the chip assembly. A pair of substantially spaced parallel read/write gap lines for supporting read/write elements extend longitudinally along the tape running surface of the chip assembly. Also, at least one groove is formed on the tape running surface on both sides of each of the read/write gap lines and extends substantially parallel to the read/write gap lines.
-
Occupational Diseases in Korea
Kim, Eun A
2010-01-01
Korea has industrialized since the 1970s. Pneumoconiosis in coal miners was the most common occupational disease in the 1970s to 1980s. With the industrialization, the use of many chemicals have increased since the 1970s. As a consequence, there were outbreaks of occupational diseases caused by poisonous chemicals, such as heavy metal poisoning, solvent poisoning and occupational asthma in the late 1980s and early 1990s with civil movement for democracy. Many actions have been taken for prevention by the government, employers and employees or unions. In the 1990s most chemical related diseases and pneumoconiosis have rapidly decreased due to improving work environment. In the late 1990s, cerebro-cardiovascular diseases related to job stress or work overloads have abruptly increased especially after the economic crisis in 1998. After the year 2000, musculoskeletal disorders became a major problem especially in assembly lines in the manufacturing industry and they were expanded to the service industry. Mental diseases related to job stress have increased. Infectious diseases increased in health care workers and afforestation workers. Occupational cancers are increasing because of their long latency, although the use of carcinogenic substances are reduced, limited, and even banned. PMID:21258589
-
ERIC Educational Resources Information Center
World Council of Churches, Geneva (Switzerland).
In December 1990, the United Nations General Assembly approved the new International Convention on the Protection of the Rights of All Migrant Workers and Members of Their Families. This international agreement broadly defines the rights of migrant workers and their families and offers some means to review the compliance of nations in upholding…
-
Augmenting Chinese hamster genome assembly by identifying regions of high confidence.
Vishwanathan, Nandita; Bandyopadhyay, Arpan A; Fu, Hsu-Yuan; Sharma, Mohit; Johnson, Kathryn C; Mudge, Joann; Ramaraj, Thiruvarangan; Onsongo, Getiria; Silverstein, Kevin A T; Jacob, Nitya M; Le, Huong; Karypis, George; Hu, Wei-Shou
2016-09-01
Chinese hamster Ovary (CHO) cell lines are the dominant industrial workhorses for therapeutic recombinant protein production. The availability of genome sequence of Chinese hamster and CHO cells will spur further genome and RNA sequencing of producing cell lines. However, the mammalian genomes assembled using shot-gun sequencing data still contain regions of uncertain quality due to assembly errors. Identifying high confidence regions in the assembled genome will facilitate its use for cell engineering and genome engineering. We assembled two independent drafts of Chinese hamster genome by de novo assembly from shotgun sequencing reads and by re-scaffolding and gap-filling the draft genome from NCBI for improved scaffold lengths and gap fractions. We then used the two independent assemblies to identify high confidence regions using two different approaches. First, the two independent assemblies were compared at the sequence level to identify their consensus regions as "high confidence regions" which accounts for at least 78 % of the assembled genome. Further, a genome wide comparison of the Chinese hamster scaffolds with mouse chromosomes revealed scaffolds with large blocks of collinearity, which were also compiled as high-quality scaffolds. Genome scale collinearity was complemented with EST based synteny which also revealed conserved gene order compared to mouse. As cell line sequencing becomes more commonly practiced, the approaches reported here are useful for assessing the quality of assembly and potentially facilitate the engineering of cell lines. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
1969-01-01
In the clustering procedure, an initial assembly step for the Saturn IB launch vehicle's S-IB (first) stage, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, position the central liquid-oxygen tank. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.
-
Determination of an Ergonomically Sound Glovebox Glove Port Center Line
DOE Office of Scientific and Technical Information (OSTI.GOV)
Christman, Marissa St; Land, Whitney Morgan
2016-11-30
Determine an ergonomic glovebox glove port center line location which will be used for standardization in new designs, thus allowing for predictable human work performance, reduced worker exposure to radiation and musculoskeletal injury risks, and improved worker comfort, efficiency, health, and safety.
-
An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.
Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir
2016-06-14
Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p < 0.05). It can be concluded that using magnifying loupes reduced discomfort in different body regions and the whole body. A conclusion of this research is that ergonomic interventions can decrease MSDs of at risk body regions in the long term.
-
Multi-objective Analysis for a Sequencing Planning of Mixed-model Assembly Line
NASA Astrophysics Data System (ADS)
Shimizu, Yoshiaki; Waki, Toshiya; Yoo, Jae Kyu
Diversified customer demands are raising importance of just-in-time and agile manufacturing much more than before. Accordingly, introduction of mixed-model assembly lines becomes popular to realize the small-lot-multi-kinds production. Since it produces various kinds on the same assembly line, a rational management is of special importance. With this point of view, this study focuses on a sequencing problem of mixed-model assembly line including a paint line as its preceding process. By taking into account the paint line together, reducing work-in-process (WIP) inventory between these heterogeneous lines becomes a major concern of the sequencing problem besides improving production efficiency. Finally, we have formulated the sequencing problem as a bi-objective optimization problem to prevent various line stoppages, and to reduce the volume of WIP inventory simultaneously. Then we have proposed a practical method for the multi-objective analysis. For this purpose, we applied the weighting method to derive the Pareto front. Actually, the resulting problem is solved by a meta-heuristic method like SA (Simulated Annealing). Through numerical experiments, we verified the validity of the proposed approach, and discussed the significance of trade-off analysis between the conflicting objectives.
-
17. Photocopy of photograph. VIEW OF WORKERS IN EAST OPERATING ...
17. Photocopy of photograph. VIEW OF WORKERS IN EAST OPERATING GALLERY USING MANIPULATOR ARMS AT STATION E-108. Photographer unknown, ca. 1965, original photograph and negative on file at the Remote Sensing Laboratory, Department of Energy, Nevada Operations Office. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV
-
ERIC Educational Resources Information Center
Jacobson, Stephen L.; Walline, James
1995-01-01
Reviews the evolution of the Quality Educator Program (QEP), sponsored by the United Auto Workers at General Motors (GM), which employs teachers, school administrators, and college faculty each summer at GM assembly plants. Participation in QEP allows educators and those in industry to interact and demonstrates quality networks in practice. (SLD)
-
2003-09-15
KENNEDY SPACE CENTER, FLA. - Workers place some of the Columbia debris moved from the Columbia Debris Hangar in its permanent storage site in the Vehicle Assembly Building. More than 83,000 pieces of debris were shipped to KSC during search and recovery efforts in East Texas. That represents about 38 percent of the dry weight of Columbia, equaling almost 85,000 pounds.
-
Nakamura, H.; Wang, J. X.
2015-01-01
The termination step is an important source of structural diversity in polyketide biosynthesis. Most type I polyketide synthase (PKS) assembly lines are terminated by a thioesterase (TE) domain located at the C-terminus of the final module, while other PKS assembly lines lack a terminal TE domain and are instead terminated by a separate enzyme in trans. In cylindrocyclophane biosynthesis, the type I modular PKS assembly line is terminated by a freestanding type III PKS (CylI). Unexpectedly, the final module of the type I PKS (CylH) also possesses a C-terminal TE domain. Unlike typical type I PKSs, the CylH TE domain does not influence assembly line termination by CylI in vitro. Instead, this domain phylogenetically resembles a type II TE and possesses activity consistent with an editing function. This finding may shed light on the evolution of unusual PKS termination logic. In addition, the presence of related type II TE domains in many cryptic type I PKS and nonribosomal peptide synthetase (NRPS) assembly lines has implications for pathway annotation, product prediction, and engineering. PMID:29218151
-
Depression in high voltage power line workers.
de Souza, Suerda Fortaleza; Carvalho, Fernando Martins; de Araújo, Tânia Maria; Koifman, Sergio; Porto, Lauro Antonio
2012-06-01
To investigate the association between effort-reward imbalance and depressive symptoms among workers in high voltage power lines. A cross-sectional study among 158 workers from an electric power company in Northeast Brazil. The main independent variables were the Effort-Reward Imbalance Model (ERI) dimensions and the main dependent variable was the prevalence of depression, as measured by the Center for Epidemiologic Studies Depression (CES-D) scale. Data were analyzed by multiple logistic regression techniques. The group of low reward workers presented a depression prevalence rate 6.2 times greater than those in the high reward group. The depression prevalence rate was 3.3 greater in workers in the situation of imbalanced effort-reward than in those in effort-reward equilibrium. The prevalence of depression was strongly associated with psychosocial factors present in the work of electricity workers.
-
125. JOB NO. LINE 5044, INTERNATIONAL RECTIFIER CORP., RACHELLE LABORATORIES, ...
125. JOB NO. LINE 5044, INTERNATIONAL RECTIFIER CORP., RACHELLE LABORATORIES, INC., LONG BEACH, CA, BY J.C. FULTON, SEPTEMBER 1982, LINE 5044, CLIFTON AND CO., ON FILE ENGINEERS DEPARTMENT, PORT OF LONG BEACH - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
d'Errico, Angelo; Fontana, Dario; Merogno, Angela
2016-01-01
to assess reproducibility of self-reported exposure to ergonomic hazards for the upper limbs, measured through a questionnaire based on a diffused checklist for the assessment of ergonomic risk (OCRA) in a sample of mechanical assemblers of an automotive industry. cross-sectional study; reproducibility was assessed as interrater agreement of a composite index of ergonomic risk, estimated through the intraclass correlation coefficient (ICC). 58 mechanical assemblers, working in 29 twin areas, characterised by same work stations and tasks. composite index of ergonomic risk for the upper limbs. reproducibility of the ergonomic index was high in the overall sample (ICC: 0.81) and it was higher for the twin areas employing same-gender workers (ICC: 0.96), compared to those with workers of the opposite gender (ICC: 0.66). these results indicate that a questionnaire measuring with a great detail the exposure to the main ergonomic risk factors for the upper limbs, as the one based on the OCRA checklist used for this study, would allow to obtain a highly reproducible ergonomic index. If its validity against the corresponding observational checklist will be found elevated by future studies, this questionnaire may represent a useful tool for a preliminary assessment of workers' exposure to ergonomic hazards for the upper limbs.
-
DNA Assembly Line for Nano-Construction
Oleg Gang
2017-12-09
Building on the idea of using DNA to link up nanoparticles scientists at Brookhaven National Lab have designed a molecular assembly line for high-precision nano-construction. Nanofabrication is essential for exploiting the unique properties of nanoparticl
-
Deployable radiator with flexible line loop
NASA Technical Reports Server (NTRS)
Keeler, Bryan V. (Inventor); Lehtinen, Arthur Mathias (Inventor); McGee, Billy W. (Inventor)
2003-01-01
Radiator assembly (10) for use on a spacecraft (12) is provided including at least one radiator panel assembly (26) repeatably movable between a panel stowed position (28) and a panel deployed position (36), at least two flexible lines (40) in fluid communication with the at least one radiator panel assembly (26) and repeatably movable between a stowage loop (42) and a flattened deployed loop (44).
-
An improved NSGA - II algorithm for mixed model assembly line balancing
NASA Astrophysics Data System (ADS)
Wu, Yongming; Xu, Yanxia; Luo, Lifei; Zhang, Han; Zhao, Xudong
2018-05-01
Aiming at the problems of assembly line balancing and path optimization for material vehicles in mixed model manufacturing system, a multi-objective mixed model assembly line (MMAL), which is based on optimization objectives, influencing factors and constraints, is established. According to the specific situation, an improved NSGA-II algorithm based on ecological evolution strategy is designed. An environment self-detecting operator, which is used to detect whether the environment changes, is adopted in the algorithm. Finally, the effectiveness of proposed model and algorithm is verified by examples in a concrete mixing system.
-
VISIONS2 Learning for Life Initiative. Workplace Literacy Implementation Model.
ERIC Educational Resources Information Center
Walsh, Chris L.; Ferguson, Susan E.; Taylor, Mary Lou
This document presents a model for implementing workplace literacy education that focuses on giving front-line workers or first-line workers basic skills instruction and an appreciation for lifelong learning. The introduction presents background information on the model, which was developed during a partnership between a technical college and an…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-25
... reconsideration investigation revealed that the workers are separately identifiable by product line and that the... separately identifiable by product line, the Department did not survey this customer. Conclusion After a... competitive with the articles produced by the workers during the relevant period and did not shift to a...
-
1969-01-01
In the clustering procedure, an initial assembly step for the Saturn IB launch vehicle's S-IB (first) stage, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, place the first of eight outboard fuel tanks atop the central liquid-oxygen tank. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.
-
2010-05-06
This image from NASA Herschel, in the constellation of Vulpecula, shows an entire assembly line of newborn stars. The diffuse glow reveals the widespread cold reservoir of raw material that our Milky Way galaxy has in stock for building stars.
-
19. Photocopy of photograph. VIEW OF WORKER MANIPULATING SMALL GLASS ...
19. Photocopy of photograph. VIEW OF WORKER MANIPULATING SMALL GLASS OBJECTS IN THE HOT BAY WITH MANIPULATOR ARMS AT WORK STATION E-2. Photographer unknown, ca. 1969, original photograph and negative on file at the Remote Sensing Laboratory, Department of Energy, Nevada Operations Office. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV
-
ERIC Educational Resources Information Center
Reich, Ann
2008-01-01
Much had been written over the past few years on the intersections of work and learning. This article suggests that the analysis of the intersections of work and learning can benefit greatly from understanding the ways in which governing workers as individuals and populations has changed in Western liberal democracies in the latter part of the…
-
Workers prepare to connect cables that will recharge the battery
2007-09-11
In the Space Station Processing Facility at NASA's Kennedy Space Center, workers prepare to connect cables that will recharge the battery for the S6 integrated truss. The final starboard truss in the assembly of the International Space Station, the S6 is scheduled to fly on space shuttle mission STS-119, whose launch date is not yet determined.
-
Workers prepare to connect cables that will recharge the battery
2007-09-11
In the Space Station Processing Facility at NASA's Kennedy Space Center, a worker connects a cable to recharge the battery for the S6 integrated truss. The final starboard truss in the assembly of the International Space Station, the S6 is scheduled to fly on space shuttle mission STS-119, whose launch date is not yet determined.
-
Workers prepare to connect cables that will recharge the battery
2007-09-11
In the Space Station Processing Facility at NASA's Kennedy Space Center, a worker holds a cable that will help recharge the battery for the S6 integrated truss. The final starboard truss in the assembly of the International Space Station, the S6 is scheduled to fly on space shuttle mission STS-119, whose launch date is not yet determined.
-
ERIC Educational Resources Information Center
Jacobson, Stephen; Walline, James
2010-01-01
In this paper we review the evolution of the Quality Educator Program (QEP), a program sponsored by the United Auto Workers (UAW)/General Motors (GM) that employs school teachers, administrators, and college and university faculty each summer in GM assembly plants. The QEP provides educators and those in industry the unique opportunity to interact…
-
Mortality among hourly motor vehicle manufacturing workers.
Delzell, Elizabeth; Brown, David A; Matthews, Robert
2003-08-01
We evaluated mortality among 198,245 motor vehicle industry workers during the period of 1973 to 1995. Workers' mortality rates were lower than expected overall (40,131 observed/43,859 expected deaths, standardized mortality ratio [SMR] = 92, CI = 91-92) and for all major cause of death categories except cancer (SMR = 100, CI = 98-102). Mortality rates were higher than expected for lung cancer overall (SMR = 110, CI = 107-113) and among employees in transmission/gear manufacturing (SMR = 121, CI = 112-130), casting operations (SMR = 122, CI = 110-135), engine manufacturing (SMR = 111, CI = 101-123), and vehicle assembly (SMR = 111, CI = 105-117); for stomach cancer in engine manufacturing (SMR = 147, CI = 110-192); and for prostate cancer in casting operations (SMR = 128, CI = 102-158). Excesses of lung cancer in transmission, vehicle assembly, and casting operations and of stomach cancer in engine manufacturing have been observed in other investigations. Further information on employees' occupational exposures and personal attributes is required to clarify the interpretation of these results.
-
Disclosure of Type 1 diabetes at work among Finnish workers.
Hakkarainen, P; Moilanen, L; Hänninen, V; Räsänen, K; Munir, F
2017-01-01
To determine which self-management factors and psychosocial work factors were associated with disclosing diabetes to colleagues, line managers and occupational health personnel among workers with Type 1 diabetes. A total of 767 working-aged respondents with Type 1 diabetes completed a Finnish cross-sectional survey named 'People with Type 1 Diabetes in Worklife'. Factor analysis was carried out, followed by logistic regressions to estimate the associations between self-management factors, psychosocial work factors and the likelihood of disclosure separately to colleagues, line managers and occupational health personnel. The models were adjusted for sociodemographic, diabetes-related and work-related variables. A total of 52% of the respondents had disclosed their diabetes to their colleagues, 45% to occupational health personnel and 28% to their line manager. Receiving social support and having good psychosocial work ability were significantly associated with disclosure to colleagues, line managers and occupational health personnel. Relations at work were associated with disclosure to colleagues and the line manager. Furthermore, opportunity to self-manage diabetes at work was associated with disclosure to colleagues. Line managers and colleagues have a remarkable role to play in providing workplace support to workers with Type 1 diabetes. Disclosure of Type 1 diabetes should be encouraged as line managers can provide workers with the right support, implement work adaptations and facilitate job retention. As only half of respondents disclosed their Type 1 diabetes at work, further research is required into the reasons for and consequences of not disclosing a diagnosis. © 2016 Diabetes UK.
-
NASA Astrophysics Data System (ADS)
Shahmoon, Asaf; Strauß, Johnnes; Zafri, Hadar; Schmidt, Michael; Zalevsky, Zeev
In this paper we present the fabrication procedure as well as the preliminary experimental results of a novel method for construction of high resolution nanometric interconnection lines. The fabrication procedure relies on a self-assembly process of gold nanoparticles at specific predetermined nanostructures. The nanostructures for the self-assembly process are based on the focused ion beam (FIB) or scanning electron beam (SEM) technology. The assembled nanoparticles are being illuminated using a picosecond laser with a wavelength of 532 nm. Different pulse energies have been investigated. The paper aimed at developing a novel and reliable process for fabrication of interconnection lines encompass three different disciplines, self-assembly of nanometric particles, optics and microelectronic.
-
García, Sandra G; Becker, Davida; de Castro, Marcela Martínez; Paz, Francisco; Olavarrieta, Claudia Díaz; Acevedo-García, Dolores
2008-09-01
Workers in Mexico's maquiladoras (assembly plants) are mainly young, single women, many of whom could benefit from emergency contraceptive pills (ECPs). Because ECPs are readily available in Mexico, women who know about the therapy can obtain it easily. Do maquiladora workers know about the method? Could worksite programs help increase awareness? To investigate these questions, we conducted a five-month intervention during which workers in three maquiladoras along the Mexico-United States border could attend educational talks on ECPs, receive pamphlets, and obtain kits containing EC supplies. Among the workers exposed to our intervention, knowledge of ECPs increased. Reported ECP use also increased. Although our intervention apparently increased workers' knowledge and use, the factory proved to be a difficult intervention setting. Problems we experienced included a factory closure and management/staff opposition to certain project elements. Future studies should continue to investigate work-site interventions and other strategies to reach workers.
-
Biosynthesis: Reprogramming assembly lines
NASA Astrophysics Data System (ADS)
Menon, Binuraj R. K.; Jenner, Matthew
2018-03-01
Rational engineering of biosynthetic assembly lines for production of new compounds is an attractive prospect, yet it presents many challenges. Learning from biology, some of the rules for expanding the chemical diversity of non-ribosomal peptides have been uncovered in two recent studies.
-
Selective directed self-assembly of coexisting morphologies using block copolymer blends
NASA Astrophysics Data System (ADS)
Stein, A.; Wright, G.; Yager, K. G.; Doerk, G. S.; Black, C. T.
2016-08-01
Directed self-assembly (DSA) of block copolymers is an emergent technique for nano-lithography, but is limited in the range of structures possible in a single fabrication step. Here we expand on traditional DSA chemical patterning. A blend of lamellar- and cylinder-forming block copolymers assembles on specially designed surface chemical line gratings, leading to the simultaneous formation of coexisting ordered morphologies in separate areas of the substrate. The competing energetics of polymer chain distortions and chemical mismatch with the substrate grating bias the system towards either line/space or dot array patterns, depending on the pitch and linewidth of the prepattern. This is in contrast to the typical DSA, wherein assembly of a single-component block copolymer on chemical templates generates patterns of either lines/spaces (lamellar) or hexagonal dot arrays (cylinders). In our approach, the chemical template encodes desired local spatial arrangements of coexisting design motifs, self-assembled from a single, sophisticated resist.
-
Mason, Krystal L; Retzer, Kyla D; Hill, Ryan; Lincoln, Jennifer M
2017-04-28
During 2003-2013, fatality rates for oil and gas extraction workers decreased for all causes of death except those associated with fall events, which increased 2% annually during 2003-2013 (1). To better understand risk factors for these events, CDC examined fatal fall events in the oil and gas extraction industry during 2005-2014 using data from case investigations conducted by the Occupational Safety and Health Administration (OSHA). Sixty-three fatal falls were identified, accounting for 15% of all fatal events. Among fatal falls, 33 (52%) workers fell from a height of >30 feet (9 meters), and 22 (35%) fell from the derrick board, the elevated work platform located in the derrick (structure used to support machinery on a drilling rig). Fall fatalities occurred most frequently when drilling rigs were being assembled or disassembled at the well site (rigging up or rigging down) (14; 22%) or when workers were removing or inserting drill pipe into the wellbore (14; 22%). Measures that target derrickmen and workers engaged in assembling and disassembling drilling rigs (rigging up and down) could reduce falls in this industry. Companies should annually update their fall protection plans and ensure effective fall prevention programs are in place for workers at highest risk for falls, including providing trainings on proper use, fit, and inspection of personal protective equipment.
-
Rugged fiber optic probe for raman measurement
O'Rourke, Patrick E.; Toole, Jr., William R.; Nave, Stanley E.
1998-01-01
An optical probe for conducting light scattering analysis is disclosed. The probe comprises a hollow housing and a probe tip. A fiber assembly made up of a transmitting fiber and a receiving bundle is inserted in the tip. A filter assembly is inserted in the housing and connected to the fiber assembly. A signal line from the light source and to the spectrometer also is connected to the filter assembly and communicates with the fiber assembly. By using a spring-loaded assembly to hold the fiber connectors together with the in-line filters, complex and sensitive alignment procedures are avoided. The close proximity of the filter assembly to the probe tip eliminates or minimizes self-scattering generated by the optical fiber. Also, because the probe can contact the sample directly, sensitive optics can be eliminated.
-
MDI Exposure for Spray-On Truck Bed Lining.
Lofgren, Don J; Walley, Terry L; Peters, Phillip M; Weis, Marty L
2003-10-01
Worker exposure to MDI (methylenediphenyl isocyanate) in the sprayed-on truck bed lining industry was assessed by examining Washington State OSHA inspection files and industrial insurance records. The industry uses MDI to form a protective urethane coating on pick-up truck beds. The lining is applied by a worker using a handheld spray gun with application equipment at temperatures and pressures specified by the urethane supplier. Inspections with MDI sampling were initially identified by searching the agency's laboratory database and were further screened for the targeted process. Data for 13 employers was found and extracted from the inspection records. All were small companies with only 1 to 2 workers exposed to MDI; 10 of the 13 employers had started the bed lining service within the last 4 years. The process was found in truck bed lining specialty shops as well as in other truck-related businesses. Six different urethane products were used with reported MDI monomer concentrations of up to 75 percent along with varying concentrations of MDI pre-polymers and other reactants and solvents. Sampling for MDI by inspectors found 7 worksites with worker exposure in excess of the state and OSHA ceiling limit of 0.200 mg/M(3). Deficiencies in respirator programs and engineering controls for MDI were cited. A review of the industrial insurance records found a total of five MDI-related claims at 4 inspected worksites, two for new-onset asthma. It was concluded that workers in the urethane sprayed-on truck bed lining industry are at an increased risk of developing illnesses associated with isocyanate exposure. Interventions are needed to further assess the hazard as well as motivate and assist franchisers, distributors, and retailers to implement effective engineering controls and respiratory protection programs in this nationally emerging small employer industry.
-
2004-09-01
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, modules wrapped in plastic line one wall. The modules and equipment are being covered in preparation for the expected impact of Hurricane Frances on Saturday. KSC workers also have powered down the Space Shuttle orbiters, closed their payload bay doors and stowed the landing gear. They are also taking precautions against flooding by moving spacecraft hardware off the ground and sandbagging facilities. The SSPF can withstand sustained winds of 110 mph and wind gusts up to 132 mph. The Orbiter Processing Facility is constructed of concrete and steel and was designed to withstand winds of 105 mph. The Vehicle Assembly Building is constructed of concrete and steel and was designed to withstand winds of 125 mph. Other payload and flight hardware support facilities can endure winds of 110 mph. Launch pads and the Payload Hazardous Servicing Facility can withstand 125-mph winds.
-
Clerici, P; Gallanelli, R; Magnante, D; Meinero, G; Mattarelli, M; Sarto, D; Zecchi, C
2005-01-01
Pottery manufacturing is typical in western Liguria and it represents one of the most important economical resources of this area. The major part of manufacturers are handicrafts, although some bigger firms have developed industrialized production cycles. Both types of productions, however, require hand work at almost all levels of processing. Most workers are women and a significant part of these are affected by Carpal Tunnel Syndrome. INAIL (Direzione Regionale Liguria) carries on a dedicated program for employers' insurance and Health & Safety implementation but--in order to do so--INAIL needs to achieve more knowledge about risk factors in this field. The aim of this study was to assess CTD risk in two pottery industries located in Albisola: in particular, two productions Cycles equipped with assembly lines have been investigated. The method used for risk assessment was OCRA Index (OCcupational Repetitive Actions), adapted to be applied to pottery industries.
-
Leclerc, A.; Franchi, P.; Cristofari, M. F.; Delemotte, B.; Mereau, P.; Teyssier-Cotte, C.; Touranchet, A.
1998-01-01
OBJECTIVES: To study the determinants of signs of carpal tunnel syndrome (CTS) in repetitive industrial work, with special attention to occupational constraints at group level and management practices of the companies. METHOD: A cross sectional study was conducted in three sectors: assembly line; clothing and shoe industry; food industry. A total of 1210 workers in repetitive work, from 53 different companies, was compared with a control group of 337 workers. Constraints at the workplace were partly self declared, and partly assessed by the occupational physicians in charge of the employees of the company. The definition of CTS was based on a standardised clinical examination. RESULTS: CTS was associated with repetitive work, especially packaging. It was more frequent among subjects who declared psychological and psychosomatic problems and those with a body mass index > or = 27. Dissatisfaction with work, lack of job control, short cycle time, and having to press repeatedly with the hand were associated with the syndrome. An odds ratio (OR) of 2.24 was found for "just in time" production. CONCLUSION: The results emphasise the complexity of the determinants of CTS, the role of psychosocial factors at work and the potentially negative effects of some practices of the companies aimed at enhancing their competitiveness. PMID:9624269
-
Ravitz, Paula; Cooke, Robert G; Mitchell, Scott; Reeves, Scott; Teshima, John; Lokuge, Bhadra; Lawson, Andrea; McNaughton, Nancy; Skinner, Wayne; Cooper, Carolynne; Fefergrad, Mark; Zaretsky, Ari
2013-06-01
To address the gaps between need and access, and between treatment guidelines and their implementation for mental illness, through capacity building of front-line health workers. Following a learning needs assessment, work-based continuing education courses in evidence-supported psychotherapies were developed for front-line workers in underserviced community settings. The 5-hour courses on the fundamentals of cognitive-behavioural therapy, interpersonal psychotherapy, motivational interviewing, and dialectical behaviour therapy each included videotaped captioned simulations, interactive lesson plans, and clinical practice behaviour reminders. Two courses, sequentially offered in 7 underserviced settings, were subjected to a mixed methods evaluation. Ninety-three nonmedical front-line workers enrolled in the program. Repeated measures analysis of variance was used to assess pre- and postintervention changes in knowledge and self-efficacy. Qualitative data from 5 semistructured focus groups with 25 participants were also analyzed. Significant pre- and postintervention changes in knowledge (P < 0.001) were found in course completers. Counselling self-efficacy improved in participants who took the first course offered (P = 0.001). Dropouts were much less frequent in peer-led, small-group learning than in a self-directed format. Qualitative analysis revealed improved confidence, morale, self-reported practice behaviour changes, and increased comfort in working with difficult clients. This work-based, multimodal, interactive, interprofessional curriculum for knowledge translation of psychotherapeutic techniques is feasible and helpful. A peer-led group format is preferred over self-directed learning. Its application can build capacity of front-line health workers in helping patients who suffer from common mental disorders.
-
Berman, S.M.; Richardson R.W.
1983-12-29
The radiant emission of a mercury-argon discharge in a fluorescent lamp assembly is enhanced by providing means for establishing a magnetic field with lines of force along the path of electron flow through the bulb of the lamp assembly, to provide Zeeman splitting of the ultraviolet spectral line. Optimum results are obtained when the magnetic field strength causes a Zeeman splitting of approximately 1.7 times the thermal line width.
-
Poverty, Place and Pedagogy in Education: Research Stories from Front-Line Workers
ERIC Educational Resources Information Center
Comber, Barbara
2016-01-01
This article considers what it means to teach and learn in places of poverty through the narratives of front-line workers--particularly students and teachers. What is the work of teaching and learning in places of poverty in current times? How has this changed? What can be learned from both the haunting and hopeful narratives of front-line…
-
NASA Astrophysics Data System (ADS)
Samadhi, TMAA; Sumihartati, Atin
2016-02-01
The most critical stage in a garment industry is sewing process, because generally, it consists of a number of operations and a large number of sewing machines for each operation. Therefore, it requires a balancing method that can assign task to work station with balance workloads. Many studies on assembly line balancing assume a new assembly line, but in reality, due to demand fluctuation and demand increased a re-balancing is needed. To cope with those fluctuating demand changes, additional capacity can be carried out by investing in spare sewing machine and paying for sewing service through outsourcing. This study develops an assembly line balancing (ALB) model on existing line to cope with fluctuating demand change. Capacity redesign is decided if the fluctuation demand exceeds the available capacity through a combination of making investment on new machines and outsourcing while considering for minimizing the cost of idle capacity in the future. The objective of the model is to minimize the total cost of the line assembly that consists of operating costs, machine cost, adding capacity cost, losses cost due to idle capacity and outsourcing costs. The model develop is based on an integer programming model. The model is tested for a set of data of one year demand with the existing number of sewing machines of 41 units. The result shows that additional maximum capacity up to 76 units of machine required when there is an increase of 60% of the average demand, at the equal cost parameters..
-
ETR COMPRESSOR BUILDING, TRA643. CAMERA FACES NORTHEAST. WATER HEAT EXCHANGER ...
ETR COMPRESSOR BUILDING, TRA-643. CAMERA FACES NORTHEAST. WATER HEAT EXCHANGER IS IN LEFT FOREGROUND. A PARTIALLY ASSEMBLED PLANT AIR CONDITIONER IS AT CENTER. WORKERS AT RIGHT ASSEMBLE 4000 HORSEPOWER COMPRESSOR DRIVE MOTOR AT RIGHT. INL NEGATIVE NO. 56-3714. R.G. Larsen, Photographer, 11/13/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
-
Chakraborty, Proshant; Daruwalla, Nayreen; Jayaraman, Anuja; Pantvaidya, Shanti
2016-08-04
This article explores how women front-line workers engage with domestic and gender-based violence in the urban informal settlements of Dharavi in Mumbai, India. We conducted in-depth interviews with 13 voluntary front-line workers, along with ethnographic fieldwork in Dharavi, as a part of a pilot study. Our findings contribute to literature on context-specific approaches to understanding gender-based violence and "models" to prevent domestic violence in urban micro-spaces. Furthermore, we also discuss notions of "change" (badlaav) that the front-line workers experience. Finally, this article presents implications for socially engaged ethnographic research, as well as contextual and grounded insights on ways to reduce gender-based and domestic violence. © The Author(s) 2016.
-
Learning, specialization, efficiency and task allocation in social insects
Muller, Helene
2009-01-01
One of the most spectacular features of social insect colonies is their division of labor. Although individuals are often totipotent in terms of the labor they might perform, they might persistently work as scouts, fighters, nurses, foragers, undertakers or cleaners with a repetitiveness that might resemble an assembly line worker in a factory. Perhaps because of this apparent analogy, researchers have often assumed a priori that such labor division must be efficient, but empirical proof is scarce. New work on Themnothorax ants shows that there might be no link between an individual's propensity to perform a task, and their efficiency at that task, nor are task specialists more efficient than generalists. Here we argue that learning psychology might provide the missing link between social insect task specialization and efficiency: just like in human societies, efficiency at a job specialty is only partially a result of “talent”, or innate tendency to engage in a job: it is much more a result of perfecting skills with experience, and the extent to which experience can be carried over from one task to the next (transfer), or whether experience at one task might actually impair performance at another (interference). Indeed there is extensive circumstantial evidence that learning is involved in almost any task performed by social insect workers, including food type recognition and handling techniques, but also such seemingly basic tasks as nest building and climate control. New findings on Cerapachys ants indicate that early experience of success at a task might to some extent determine the “profession” an insect worker chooses in later life. PMID:19513269
-
Design of on-line system for measuring and tracking time of assembly
NASA Astrophysics Data System (ADS)
Senderská, Katarína; Mareš, Albert; Evin, Emil
2016-04-01
Manual assembly performed at assembly workstations nowadays still has a unique place in different kinds of production. To increase the productivity and quality of manual assembly it is necessary to analyse the existing workplaces and find ways to improve and streamline work done at these workplaces. The article deals with the design of a model for on-line analysis of a manual assembly process. The proposed model is based on the use of sensors or the so-called button-box and the use of software for recording and evaluating data. Based on the obtained data it is then possible to evaluate the time characteristics of the assembly process, aswell as to find sources of delays and mistakes and then take appropriate action to correct them.
-
The first optical convention (in English): the 1905 Optical Convention in London, England
NASA Astrophysics Data System (ADS)
Thompson, Kevin P.
2006-06-01
One hundred years ago, optical workers of London assembled to discuss a variety of topics in optics. This paper provides an overview of The 1905 Proceedings, a discussion of the state of optical design in this period based on relevant books of the period, and an introduction to a self-published autobiography of a worker active in the period that was found on The Internet.
-
ERIC Educational Resources Information Center
Lyons, Thomas M.; Knight, Glen A.
A model project was conducted to demonstrate how Chrysler, in partnership with the education community and the government, could provide technical training to enable displaced workers to contribute to the "H-Body" car launch, to improve their job skills, and to enhance their future employability. The training was conducted on a pilot…
-
Selective directed self-assembly of coexisting morphologies using block copolymer blends
Stein, A.; Wright, G.; Yager, K. G.; Doerk, G. S.; Black, C. T.
2016-01-01
Directed self-assembly (DSA) of block copolymers is an emergent technique for nano-lithography, but is limited in the range of structures possible in a single fabrication step. Here we expand on traditional DSA chemical patterning. A blend of lamellar- and cylinder-forming block copolymers assembles on specially designed surface chemical line gratings, leading to the simultaneous formation of coexisting ordered morphologies in separate areas of the substrate. The competing energetics of polymer chain distortions and chemical mismatch with the substrate grating bias the system towards either line/space or dot array patterns, depending on the pitch and linewidth of the prepattern. This is in contrast to the typical DSA, wherein assembly of a single-component block copolymer on chemical templates generates patterns of either lines/spaces (lamellar) or hexagonal dot arrays (cylinders). In our approach, the chemical template encodes desired local spatial arrangements of coexisting design motifs, self-assembled from a single, sophisticated resist. PMID:27480327
-
Selective directed self-assembly of coexisting morphologies using block copolymer blends
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stein, A.; Wright, G.; Yager, K. G.
Directed self-assembly (DSA) of block copolymers is an emergent technique for nano-lithography, but is limited in the range of structures possible in a single fabrication step. We expand on traditional DSA chemical patterning. Moreover, a blend of lamellar- and cylinder-forming block copolymers assembles on specially designed surface chemical line gratings, leading to the simultaneous formation of coexisting ordered morphologies in separate areas of the substrate. The competing energetics of polymer chain distortions and chemical mismatch with the substrate grating bias the system towards either line/space or dot array patterns, depending on the pitch and linewidth of the prepattern. This contrastsmore » with typical DSA, wherein assembly of a single-component block copolymer on chemical templates generates patterns of either lines/spaces (lamellar) or hexagonal dot arrays (cylinders). In our approach, the chemical template encodes desired local spatial arrangements of coexisting design motifs, self-assembled from a single, sophisticated resist.« less
-
Selective directed self-assembly of coexisting morphologies using block copolymer blends
Stein, A.; Wright, G.; Yager, K. G.; ...
2016-08-02
Directed self-assembly (DSA) of block copolymers is an emergent technique for nano-lithography, but is limited in the range of structures possible in a single fabrication step. We expand on traditional DSA chemical patterning. Moreover, a blend of lamellar- and cylinder-forming block copolymers assembles on specially designed surface chemical line gratings, leading to the simultaneous formation of coexisting ordered morphologies in separate areas of the substrate. The competing energetics of polymer chain distortions and chemical mismatch with the substrate grating bias the system towards either line/space or dot array patterns, depending on the pitch and linewidth of the prepattern. This contrastsmore » with typical DSA, wherein assembly of a single-component block copolymer on chemical templates generates patterns of either lines/spaces (lamellar) or hexagonal dot arrays (cylinders). In our approach, the chemical template encodes desired local spatial arrangements of coexisting design motifs, self-assembled from a single, sophisticated resist.« less
-
[Effects of occupational stress on serum tumor necrosis factor-α and interleukins].
Zhou, Wen-Hui; Yu, Shan-Fa; Jiang, Kai-You
2010-12-01
To explore the effect of occupational stress on serum tumor necrosis factor-α (TNF-α), interleukin (IL)-1β, IL-2 and IL-4. A cross-sectional epidemiological study was conducted in 200 workers from the refrigerator assembly line in Henan province in China. Psychosocial work conditions were measured by using the job demand-control model, the effort-reward imbalance model questionnaires and occupational stress measurement scale. Serum TNF-α, IL-1β, IL-2, and IL-4 concentrations were measured by radioimmunoassay or immunoradiometric assay method respectively. Serum TNF-α concentration was statistically significantly different between workers with higher affective balance level and control groups [(1.947 ± 0.173) and (2.029 ± 0.240) fmol/ml] (P < 0.05). Serum IL-1β concentration was statistically significantly different between workers with higher effort level and control groups [(0.133 ± 0.034) and (0.118 ± 0.031) ng/ml] (P < 0.05). Serum IL-2 concentration was statistically significantly different between workers with higher role ambiguity level [(1.658 ± 0.376) and (1.491 ± 0.033) ng/ml] and control groups (P < 0.05), as well as between workers with higher role conflict level and control groups [(1.774 ± 0.311) and (1.589 ± 0.380) ng/ml] (P < 0.05), between workers with higher daily life stress level and control groups [(1.759 ± 0.361) and (1.606 ± 0.381) ng/ml] (P < 0.05). Serum IL-4 concentration was statistically significantly different between workers with higher reward level and control groups [(1.449 ± 0.025) and (1.466 ± 0.041) pg/ml] (P < 0.05). Stepwise regression analysis indicated that affective balance was the predictor of serum TNF-α (R(2) = 0.029). Effort and mental health were the predictors of serum IL-1β (R(2) was 0.029 and 0.055, respectively). Role conflict, daily life stress and role ambiguity were the predictors of serum IL-2 (R(2) was 0.040, 0.078 and 0.104, respectively). Reward was the predictor of serum IL-4 (R(2) = 0.030). Unhealthy psychological stress factor might be induce a marked increase in the concentrations of serum TNF-α, IL-1β, IL-2, as well as IL-4.
-
Tsutsumi, A; Kayaba, K; Theorell, T; Siegrist, J
2001-04-01
This study compared the separate effects produced by two complementary stress models--the job demand-control model and the effort-reward imbalance model--on depression among employees threatened by job loss. A cross-sectional analysis was conducted to examine these associations among 190 male and female employees who responded to a self-administered questionnaire in a small Japanese plant with economic hardship. The employees were engaged in 2 job types--direct assembly line and indirect supportive tasks--and the latter was threatened by job loss because of downsizing. Independent variables were measured by the Japanese versions of Karasek's demand-control questionnaire and Siegrist's effort-reward imbalance questionnaire. Depression was assessed by the Center for Epidemiologic Studies Depression Scale. The employees with indirect supportive tasks (target for downsizing) were more likely to have depressive symptoms than direct assembly-line workers. Job strain, a combination of high demand and low control at work, was more frequent among the latter, while the combination of high effort and low reward was more frequent among the former. After adjustment for work environment factors, low control [odds ratio (OR) 4.7], effort reward imbalance (OR 4.1), and overcommitment (the person characteristic included in the effort-reward imbalance model) (OR 2.6) were independently related to depression. There is some indication that these effects were particularly strong in the subgroup suffering from potential job loss. This study confirms that the 2 job stress models identify different aspects of stressful job conditions. Moreover, effort-reward imbalance and low control at work are both associated with symptoms of depression.
-
Organizational Justice and Social Workers' Intentions to Leave Agency Positions
ERIC Educational Resources Information Center
Kim, Tae Kuen; Solomon, Phyllis; Jang, Cinjae
2012-01-01
The authors investigated the impact of organizational justice on social workers' intention to leave Korean social service agencies. Specifically, this study concentrated on the moderating effect of organizational justice on the relationship between burnout and intention to leave. The authors surveyed 218 front-line social workers from 51 social…
-
Measurement of DNA repair deficiency in workers exposed to benzene
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hallberg, L.M.; Au, W.W.; El Zein, R.
1996-05-01
We hypothesize that chronic exposure to environmental toxicants can induce genetic damage causing DNA repair deficiencies and leading to the postulated mutator phenotype of carcinogenesis. To test our hypothesis, a host cell reactivation (HCR) assay was used in which pCMVcat plasmids were damaged with UV light (175, 350 J/m{sup 2} UV light), inactivating the chloramphenicol acetyltransferase reporter gene, and then transfected into lymphocytes. Transfected lymphocytes were therefore challenged to repair the damaged plasmids, reactivating the reporter gene. Xeroderma pigmentosum (XP) and Gaucher cell lines were used as positive and negative controls for the HCR assay. The Gaucher cell line repairedmore » normally but XP cell lines demonstrated lower repair activity. Additionally, the repair activity of the XP heterozygous cell line showed intermediate repair compared to the homozygous XP and Gaucher cells. We used HCR to measure the effects of benzene exposure on 12 exposed and 8 nonexposed workers from a local benzene plant. Plasmids 175 J/m{sup 2} and 350 J/m{sup 2} were repaired with a mean frequency of 66% and 58%, respectively, in control workers compared to 71% and 62% in exposed workers. Conversely, more of the exposed workers were grouped into the reduced repair category than controls. These differences in repair capacity between exposed and control workers were, however, not statistically significant. The lack of significant differences between the exposed and control groups may be due to extremely low exposure to benzene (<0.3 ppm), small population size, or a lack of benzene genotoxicity at these concentrations. These results are consistent with a parallel hprt gene mutation assay. 26 refs., 4 figs., 2 tabs.« less
-
91. Neg. No. F174A, Apr 24, 1936, INTERIORASSEMBLY BUILDING, FINISHED ...
91. Neg. No. F-174A, Apr 24, 1936, INTERIOR-ASSEMBLY BUILDING, FINISHED CARS AT THE END OF THE ASSEMBLY LINE - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
Assembly work in Indonesia and in Sweden--ergonomics, health and satisfaction.
Waluyo, L; Ekberg, K; Eklund, J
1996-02-01
Work conditions in industrial production vary substantially between different cultures. In the present study the aims were to identify differences between Swedish and Indonesian assembly industry workers regarding work environment factors, health and job satisfaction, and to find associations between work environment factors, and the health measures. Data were collected by a questionnaire from 326 Swedish and 136 Indonesian assembly industry workers, interviews and from company documents. The prevalence of musculoskeletal symptoms was high in both groups. Stress and psychosomatic symptoms had higher prevalences in the Swedish group, which also rated their work conditions as worse in most respects. Work tasks were physically heavier in Indonesia, but less monotonous and with lower demands on productivity. The Indonesians were more satisfied with their jobs. Physical job demands were associated with musculoskeletal symptoms. Competence development was associated with increased job satisfaction. Conflicts and harassments at work were associated with stress and psychosomatic symptoms. Job pressure, especially deficient planning of the jobs was associated with lower job satisfaction, psychosomatic and stress symptoms in the Swedish group. Implications for job design in the two cultures are presented.
-
NASA Astrophysics Data System (ADS)
Yahya, N. M.; Zahid, M. N. O.
2018-03-01
This study conducted to assess the work-related musculoskeletal disorders (WMDs) among the workers at core assembly production in an electronic components manufacturing company located in Pekan, Pahang, Malaysia. The study is to identify the WMDs risk factor and risk level. A set of questionnaires survey based on modified Nordic Musculoskeletal Disorder Questionnaires have been distributed to respective workers to acquire the WMDs risk factor identification. Then, postural analysis was conducted in order to measure the respective WMDs risk level. The analysis were based on two ergonomics assessment tools; Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). The study found that 30 respondents out of 36 respondents suffered from WMDs especially at shoulder, wrists and lower back. The WMDs risk have been identified from unloading process, pressing process and winding process. In term of the WMDs risk level, REBA and RULA assessment tools have indicated high risk level to unloading and pressing process. Thus, this study had established the WMDs risk factor and risk level of core assembly production in an electronic components manufacturing company at Malaysia environment.
-
Magnetic fluorescent lamp having reduced ultraviolet self-absorption
Berman, Samuel M.; Richardson, Robert W.
1985-01-01
The radiant emission of a mercury-argon discharge in a fluorescent lamp assembly (10) is enhanced by providing means (30) for establishing a magnetic field with lines of force along the path of electron flow through the bulb (12) of the lamp assembly, to provide Zeeman splitting of the ultraviolet spectral line. Optimum results are obtained when the magnetic field strength causes a Zeeman splitting of approximately 1.7 times the thermal line width.
-
NASA Astrophysics Data System (ADS)
Patel, K. C.; Ruiz, R.; Lille, J.; Wan, L.; Dobiz, E.; Gao, H.; Robertson, N.; Albrecht, T. R.
2012-03-01
Directed self-assembly is emerging as a promising technology to define sub-20nm features. However, a straightforward path to scale block copolymer lithography to single-digit fabrication remains challenging given the diverse material properties found in the wide spectrum of self-assembling materials. A vast amount of block copolymer research for industrial applications has been dedicated to polystyrene-b-methyl methacrylate (PS-b-PMMA), a model system that displays multiple properties making it ideal for lithography, but that is limited by a weak interaction parameter that prevents it from scaling to single-digit lithography. Other block copolymer materials have shown scalability to much smaller dimensions, but at the expense of other material properties that could delay their insertion into industrial lithographic processes. We report on a line doubling process applied to block copolymer patterns to double the frequency of PS-b-PMMA line/space features, demonstrating the potential of this technique to reach single-digit lithography. We demonstrate a line-doubling process that starts with directed self-assembly of PS-b-PMMA to define line/space features. This pattern is transferred into an underlying sacrificial hard-mask layer followed by a growth of self-aligned spacers which subsequently serve as hard-masks for transferring the 2x frequency doubled pattern to the underlying substrate. We applied this process to two different block copolymer materials to demonstrate line-space patterns with a half pitch of 11nm and 7nm underscoring the potential to reach single-digit critical dimensions. A subsequent patterning step with perpendicular lines can be used to cut the fine line patterns into a 2-D array of islands suitable for bit patterned media. Several integration challenges such as line width control and line roughness are addressed.
-
Simulation of Assembly Line Balancing in Automotive Component Manufacturing
NASA Astrophysics Data System (ADS)
Jamil, Muthanna; Mohd Razali, Noraini
2016-02-01
This study focuses on the simulation of assembly line balancing in an automotive component in a vendor manufacturing company. A mixed-model assembly line of charcoal canister product that is used in an engine system as fuel's vapour filter was observed and found that the current production rate of the line does not achieve customer demand even though the company practices buffer stock for two days in advance. This study was carried out by performing detailed process flow and time studies along the line. To set up a model of the line by simulation, real data was taken from a factory floor and tested for distribution fit. The data gathered was then transformed into a simulation model. After verification of the model by comparing it with the actual system, it was found that the current line efficiency is not at its optimum condition due to blockage and idle time. Various what-if analysis were applied to eliminate the cause. Proposed layout shows that the line is balanced by adding buffer to avoid the blockage. Whereas, manpower is added the stations to reduce process time therefore reducing idling time. The simulation study was carried out using ProModel software.
-
2010-04-06
Assembly began April 1, 2010, for NASA Juno spacecraft. Workers at Lockheed Martin Space Systems in Denver, Colorado are moving into place the vault that will protect the spacecraft sensitive electronics from Jupiter intense radiation belts.
-
NASA Astrophysics Data System (ADS)
Oesterle, Jonathan; Lionel, Amodeo
2018-06-01
The current competitive situation increases the importance of realistically estimating product costs during the early phases of product and assembly line planning projects. In this article, several multi-objective algorithms using difference dominance rules are proposed to solve the problem associated with the selection of the most effective combination of product and assembly lines. The list of developed algorithms includes variants of ant colony algorithms, evolutionary algorithms and imperialist competitive algorithms. The performance of each algorithm and dominance rule is analysed by five multi-objective quality indicators and fifty problem instances. The algorithms and dominance rules are ranked using a non-parametric statistical test.
-
40 CFR 1054.305 - How must I prepare and test my production-line engines?
Code of Federal Regulations, 2011 CFR
2011-07-01
... way that represents the assembly procedures for other engines in the engine family. You must ask us to approve any deviations from your normal assembly procedures for other production engines in the engine family. (a) Test procedures. Test your production-line engines using the applicable testing procedures in...
-
40 CFR 1054.305 - How must I prepare and test my production-line engines?
Code of Federal Regulations, 2013 CFR
2013-07-01
... way that represents the assembly procedures for other engines in the engine family. You must ask us to approve any deviations from your normal assembly procedures for other production engines in the engine family. (a) Test procedures. Test your production-line engines using the applicable testing procedures in...
-
40 CFR 1054.305 - How must I prepare and test my production-line engines?
Code of Federal Regulations, 2010 CFR
2010-07-01
... way that represents the assembly procedures for other engines in the engine family. You must ask us to approve any deviations from your normal assembly procedures for other production engines in the engine family. (a) Test procedures. Test your production-line engines using the applicable testing procedures in...
-
40 CFR 1054.305 - How must I prepare and test my production-line engines?
Code of Federal Regulations, 2014 CFR
2014-07-01
... way that represents the assembly procedures for other engines in the engine family. You must ask us to approve any deviations from your normal assembly procedures for other production engines in the engine family. (a) Test procedures. Test your production-line engines using the applicable testing procedures in...
-
40 CFR 1054.305 - How must I prepare and test my production-line engines?
Code of Federal Regulations, 2012 CFR
2012-07-01
... way that represents the assembly procedures for other engines in the engine family. You must ask us to approve any deviations from your normal assembly procedures for other production engines in the engine family. (a) Test procedures. Test your production-line engines using the applicable testing procedures in...
-
The ribosomal subunit assembly line
Dlakić, Mensur
2005-01-01
Recent proteomic studies in Saccharomyces cerevisiae have identified nearly 200 proteins, other than the structural ribosomal proteins, that participate in the assembly of ribosomal subunits and their transport from the nucleus. In a separate line of research, proteomic studies of mature plant ribosomes have revealed considerable variability in the protein composition of individual ribosomes. PMID:16207363
-
2003-09-15
KENNEDY SPACE CENTER, FLA. - A worker moves some of the Columbia debris to its storage site in the Vehicle Assembly Building (VAB). The debris is being transferred from the Columbia Debris Hangar to the VAB for permanent storage. More than 83,000 pieces of debris were shipped to KSC during search and recovery efforts in East Texas. That represents about 38 percent of the dry weight of Columbia, equaling almost 85,000 pounds.
-
2003-09-15
KENNEDY SPACE CENTER, FLA. - Workers move some of the Columbia debris to its storage site in the Vehicle Assembly Building (VAB). The debris is being transferred from the Columbia Debris Hangar to the VAB for permanent storage. More than 83,000 pieces of debris were shipped to KSC during search and recovery efforts in East Texas. That represents about 38 percent of the dry weight of Columbia, equaling almost 85,000 pounds.
-
Naz, Anila; Rosenberg, Ellen; Andersson, Neil; Labonté, Ronald; Andermann, Anne
2016-11-01
To assess the feasibility of implementing a clinical decision aid called the CLEAR Toolkit that helps front-line health workers ask their patients about social determinants of health, refer to local support resources, and advocate for wider social change. A mixed-methods study using quantitative (online self-completed questionnaires) and qualitative (in-depth interviews, focus groups, and key informant interviews) methods. A large, university-affiliated family medicine teaching centre in Montreal, Que, serving one of the most ethnically diverse populations in Canada. Fifty family doctors and allied health workers responded to the online survey (response rate of 50.0%), 15 completed in-depth interviews, 14 joined 1 of 2 focus groups, and 3 senior administrators participated in key informant interviews. Our multimethod approach included an online survey of front-line health workers to assess current practices and collect feedback on the tool kit; in-depth interviews to understand why they consider certain patients to be more vulnerable and how to help such patients; focus groups to explore barriers to asking about social determinants of health; and key informant interviews with high-level administrators to identify organizational levers for changing practice. Senior administrators consider asking about social determinants to be part of the mandate of health workers. However, barriers perceived by front-line clinicians include insufficient training in social history taking, uncertainty about how to address these issues in clinical practice, and a lack of knowledge of local referral resources. Health workers with specific ways of asking patients about their social challenges were more likely to report having helped their patients as compared with those who did not know how to ask (93.8% vs 52.9%; P = .003). While health workers recognize the importance of social determinants, many are unsure how to ask about these often sensitive issues or where to refer patients. The CLEAR Toolkit can be easily adapted to local contexts to help front-line health workers initiate dialogue around social challenges and better support patients in clinical practice. Copyright© the College of Family Physicians of Canada.
-
Draft genome of the lined seahorse, Hippocampus erectus.
Lin, Qiang; Qiu, Ying; Gu, Ruobo; Xu, Meng; Li, Jia; Bian, Chao; Zhang, Huixian; Qin, Geng; Zhang, Yanhong; Luo, Wei; Chen, Jieming; You, Xinxin; Fan, Mingjun; Sun, Min; Xu, Pao; Venkatesh, Byrappa; Xu, Junming; Fu, Hongtuo; Shi, Qiong
2017-06-01
The lined seahorse, Hippocampus erectus , is an Atlantic species and mainly inhabits shallow sea beds or coral reefs. It has become very popular in China for its wide use in traditional Chinese medicine. In order to improve the aquaculture yield of this valuable fish species, we are trying to develop genomic resources for assistant selection in genetic breeding. Here, we provide whole genome sequencing, assembly, and gene annotation of the lined seahorse, which can enrich genome resource and further application for its molecular breeding. A total of 174.6 Gb (Gigabase) raw DNA sequences were generated by the Illumina Hiseq2500 platform. The final assembly of the lined seahorse genome is around 458 Mb, representing 94% of the estimated genome size (489 Mb by k-mer analysis). The contig N50 and scaffold N50 reached 14.57 kb and 1.97 Mb, respectively. Quality of the assembled genome was assessed by BUSCO with prediction of 85% of the known vertebrate genes and evaluated using the de novo assembled RNA-seq transcripts to prove a high mapping ratio (more than 99% transcripts could be mapped to the assembly). Using homology-based, de novo and transcriptome-based prediction methods, we predicted 20 788 protein-coding genes in the generated assembly, which is less than our previously reported gene number (23 458) of the tiger tail seahorse ( H. comes ). We report a draft genome of the lined seahorse. These generated genomic data are going to enrich genome resource of this economically important fish, and also provide insights into the genetic mechanisms of its iconic morphology and male pregnancy behavior. © The Authors 2017. Published by Oxford University Press.
-
Draft genome of the lined seahorse, Hippocampus erectus
Lin, Qiang; Qiu, Ying; Gu, Ruobo; Xu, Meng; Li, Jia; Bian, Chao; Zhang, Huixian; Qin, Geng; Zhang, Yanhong; Luo, Wei; Chen, Jieming; You, Xinxin; Fan, Mingjun; Sun, Min; Xu, Pao; Venkatesh, Byrappa
2017-01-01
Abstract Background: The lined seahorse, Hippocampus erectus, is an Atlantic species and mainly inhabits shallow sea beds or coral reefs. It has become very popular in China for its wide use in traditional Chinese medicine. In order to improve the aquaculture yield of this valuable fish species, we are trying to develop genomic resources for assistant selection in genetic breeding. Here, we provide whole genome sequencing, assembly, and gene annotation of the lined seahorse, which can enrich genome resource and further application for its molecular breeding. Findings: A total of 174.6 Gb (Gigabase) raw DNA sequences were generated by the Illumina Hiseq2500 platform. The final assembly of the lined seahorse genome is around 458 Mb, representing 94% of the estimated genome size (489 Mb by k-mer analysis). The contig N50 and scaffold N50 reached 14.57 kb and 1.97 Mb, respectively. Quality of the assembled genome was assessed by BUSCO with prediction of 85% of the known vertebrate genes and evaluated using the de novo assembled RNA-seq transcripts to prove a high mapping ratio (more than 99% transcripts could be mapped to the assembly). Using homology-based, de novo and transcriptome-based prediction methods, we predicted 20 788 protein-coding genes in the generated assembly, which is less than our previously reported gene number (23 458) of the tiger tail seahorse (H. comes). Conclusion: We report a draft genome of the lined seahorse. These generated genomic data are going to enrich genome resource of this economically important fish, and also provide insights into the genetic mechanisms of its iconic morphology and male pregnancy behavior. PMID:28444302
-
Nuclear reactor shutdown control rod assembly
Bilibin, Konstantin
1988-01-01
A temperature responsive, self-actuated nuclear reactor shutdown control rod assembly 10. The upper end 18 of a lower drive line 17 fits within the lower end of an upper drive line 12. The lower end (not shown) of the lower drive line 17 is connected to a neutron absorber. During normal temperature conditions the lower drive line 17 is supported by detent means 22,26. When an overtemperature condition occurs thermal actuation means 34 urges ring 26 upwardly sufficiently to allow balls 22 to move radially outwardly thereby allowing lower drive line 17 to move downwardly toward the core of the nuclear reactor resulting in automatic reduction of the reactor powder.
-
Hodes, R; Price, I; Bungane, N; Toska, E; Cluver, L
2017-08-25
Shortages of essential medicines are a daily occurrence in many of South Africa (SA)'s public health facilities. This study focuses on the responses of healthcare workers to stock-outs, investigating how actors at the 'front line' of public health delivery understand, experience and respond to shortages of essential medicines and equipment in their facilities. Findings are based on focus groups, observations and interviews with healthcare workers and patients at healthcare facilities in the Eastern Cape Province of SA, conducted as part of the Mzantsi Wakho study. The research revealed a discrepancy between 'informal' definitions of stock-outs and their reporting through formal stock-out management channels. Front-line healthcare workers had designed their own systems for classifying the severity of stock-outs, based on the product in question, and on their potential to access stocks from other facilities. Beyond formal systems of procurement and supply, healthcare workers had established vast networks of alternative communication and action, often using personal resources to procure medical supplies. Stock-outs were only reported when informal methods of stock-sharing did not secure top-up supplies. These findings have implications for understanding the frequency and severity of stock-outs, and for taking action to prevent and manage stock-outs effectively.
-
Causes of electrical deaths and injuries among construction workers.
McCann, Michael; Hunting, Katherine L; Murawski, Judith; Chowdhury, Risana; Welch, Laura
2003-04-01
Contact with electrical current is the fourth leading cause of deaths of construction workers. This study evaluates electrical deaths and injuries to construction workers. Two sources of data were analyzed in detail: (1) 1,019 electrical deaths identified by the Bureau of Labor Statistics, Census of Fatal Occupational Injuries (CFOI) for the years 1992-1998; and (2) 61 electrical injuries identified between November 1, 1990 and December 31, 1998 from a George Washington University Emergency Department injury surveillance database. Contact with "live" electrical wiring, equipment, and light fixtures was the main cause of electrical deaths and injuries among electrical workers, followed by contact with overhead power lines. Among non-electrical workers, contact with overhead power lines was the major cause of death. Other causes included contact with energized metal objects, machinery, power tools, and portable lights. Arc flash or blast caused 31% of electrical injuries among construction workers, but less than 2% of electrical deaths. Adoption of a lockout/tagout standard for construction, and training for non-electrical workers in basic electrical safety would reduce the risk of electrical deaths and injuries in construction. Further research is needed on ways to prevent electrical deaths and injuries while working "live". Copyright 2003 Wiley-Liss, Inc.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-23
... production of green and kiln dried lumber. The workers are not separately identifiable by product line. At... Stafftrak Beckley, WV, Cranberry Lumber Company Including Workers of Greenbrier Forest Products, Inc. Smoot... Cranberry Hardwoods, Inc., in Beckley, West Virginia; Greenbrier Forest Products in Smoot, West Virginia...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-27
... the production of finished stone fabrication products. The workers are not separately identifiable by product line. The subject worker group includes on-site leased workers from Express Employment... articles like or directly competitive with the finished stone fabrication products produced by Stone Age...
-
Miller, Jason R; Koren, Sergey; Dilley, Kari A; Puri, Vinita; Brown, David M; Harkins, Derek M; Thibaud-Nissen, Françoise; Rosen, Benjamin; Chen, Xiao-Guang; Tu, Zhijian; Sharakhov, Igor V; Sharakhova, Maria V; Sebra, Robert; Stockwell, Timothy B; Bergman, Nicholas H; Sutton, Granger G; Phillippy, Adam M; Piermarini, Peter M; Shabman, Reed S
2018-03-01
The 50-year-old Aedes albopictus C6/36 cell line is a resource for the detection, amplification, and analysis of mosquito-borne viruses including Zika, dengue, and chikungunya. The cell line is derived from an unknown number of larvae from an unspecified strain of Aedes albopictus mosquitoes. Toward improved utility of the cell line for research in virus transmission, we present an annotated assembly of the C6/36 genome. The C6/36 genome assembly has the largest contig N50 (3.3 Mbp) of any mosquito assembly, presents the sequences of both haplotypes for most of the diploid genome, reveals independent null mutations in both alleles of the Dicer locus, and indicates a male-specific genome. Gene annotation was computed with publicly available mosquito transcript sequences. Gene expression data from cell line RNA sequence identified enrichment of growth-related pathways and conspicuous deficiency in aquaporins and inward rectifier K+ channels. As a test of utility, RNA sequence data from Zika-infected cells were mapped to the C6/36 genome and transcriptome assemblies. Host subtraction reduced the data set by 89%, enabling faster characterization of nonhost reads. The C6/36 genome sequence and annotation should enable additional uses of the cell line to study arbovirus vector interactions and interventions aimed at restricting the spread of human disease.
-
A Design Problem of Assembly Line Systems using Genetic Algorithm under the BTO Environment
NASA Astrophysics Data System (ADS)
Abe, Kazuaki; Yamada, Tetsuo; Matsui, Masayuki
Under the BTO environment, stochastic assembly lines require design methods which shorten not only the production lead time but also the ready time for the line design. We propose a design method for Assembly Line Systems (ALS) in Yamada et al. (2001) by using Genetic Algorithm (GA) and Adam-Eve GA, in which all design variables are determined in consideration of constraints such as line length related to the production lead time. First, an ALS model with a line length constraint is introduced, and an optimal design problem is set to maximize the net reward under shorter lead time. Next, a simulation optimization method is developed using Adam-Eve GA and traditional GA. Finally, an optimal design example is shown and discussed by comparing the 2-stage design by Yamada et al. (2001) and both the GA designs. It is shown that the Adam-Eve GA is superior to the traditional GA design in terms of computational time though there is only a slight difference in terms of net reward.
-
83. Neg. No. F53, Apr 13, 1930, INTERIORASSEMBLY BUILDING, BACK ...
83. Neg. No. F-53, Apr 13, 1930, INTERIOR-ASSEMBLY BUILDING, BACK TRIM LINE - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
85. Neg. No. F51, Apr 13, 1930, INTERIORASSEMBLY BUILDING, BODY ...
85. Neg. No. F-51, Apr 13, 1930, INTERIOR-ASSEMBLY BUILDING, BODY AND CUSHION LINE - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
Lymphocyte DNA damage in bus manufacturing workers.
Zhu, C Q; Lam, T H; Jiang, C Q
2001-04-05
To study the effect of occupational exposure, smoking, and drinking on lymphocyte DNA damage in bus manufacturing workers, 346 employees (106 women and 240 men) from six job categories (welders, mechanics, painters, and assembling, auxiliary and managerial workers) in a bus manufacturing factory in Guangzhou were included. Significant differences of tail moment among the six job categories were found (P=0.003) with adjustment for age and gender. Smoking increased tail moment significantly (3.14 (2.89-3.40) versus 2.79 microm (2.63-2.97), P=0.023). Analysis of covariance showed that occupational exposure (P=0.001) and smoking (P=0.019) had significant effect on tail moment after adjusting for all factors, whereas age and gender had no effect on DNA damage. Stratified analysis showed that painters (P=0.002), auxiliary workers (P=0.011), and mechanics (P=0.044) had larger tail moments than managerial workers after adjusting for age, gender, smoking, and drinking.
-
A biomonitoring study of genotoxic risk to workers of transformers and distribution line stations.
Celikler, Serap; Aydemir, Nilufer; Vatan, Ozgur; Kurtuldu, Sevim; Bilaloglu, Rahmi
2009-12-01
A cytogenetic monitoring study was carried out on a group of workers from transformer and distribution line stations in the Bursa province of Turkey, to investigate the genotoxic risk of occupational exposure to extremely low frequency electric (ELF) and magnetic fields (EMF). Cytogenetic analysis, namely chromosomal aberrations (CAs) and micronucleus (MN) tests were performed on a strictly selected group of 55 workers and compared to 17 controls. CA and MN frequencies in electrical workers appeared significantly higher than in controls (p < 0.001, 0.05, respectively). The frequency of CA in exposed groups were significantly enhanced with the years of exposure (p < 0.01). The effect of smoking on the level of CA and MN was not significant in the control and exposure groups. The results of this study demonstrated that a significant induction of cytogenetic damage in peripheral lymphocytes of workers engaged to occupational exposure to ELMF in electric transformer and distribution stations.
-
2010-05-03
Assembly began April 1, 2010, for NASA Juno spacecraft in the high-bay cleanroom at Lockheed Martin in Denver, Colo. Workers are moving the radiation vault above a mock-up of the upper part of the spacecraft main body.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-12
..., CDI, Syncreon and Caravan Knight Facilities Management LLC; Detriot, MI; Amended Certification... workers from Aerotek, CDI, Syncreon and Caravan Knight Facilities Management LLC, Detroit, Michigan, who...
-
Hahs, Charles A.; Burbage, Charles H.
1984-01-01
The invention is a pneumatically operated valve assembly for simultaneously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two of the lines so closed. The valve assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.
-
Hahs, C.A.; Rurbage, C.H.
1982-03-17
The invention is pneumatically operated valve assembly for simulatenously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two on the lines so closed. The value assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.
-
Harnessing Thin-Film Continuous-Flow Assembly Lines.
Britton, Joshua; Castle, Jared W; Weiss, Gregory A; Raston, Colin L
2016-07-25
Inspired by nature's ability to construct complex molecules through sequential synthetic transformations, an assembly line synthesis of α-aminophosphonates has been developed. In this approach, simple starting materials are continuously fed through a thin-film reactor where the intermediates accrue molecular complexity as they progress through the flow system. Flow chemistry allows rapid multistep transformations to occur via reaction compartmentalization, an approach not amenable to using conventional flasks. Thin film processing can also access facile in situ solvent exchange to drive reaction efficiency, and through this method, α-aminophosphonate synthesis requires only 443 s residence time to produce 3.22 g h(-1) . Assembly-line synthesis allows unprecedented reaction flexibility and processing efficiency. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
[Investigation of noise hazards and hearing status of workers in outdoor quarries].
Zhang, Guoying; Tang, Zhifeng; Yao, Yongping; Wang, Haiying
2014-08-01
To investigate the noise hazards in open quarries and to provide a basis for further control of noise hazards. An investigation was performed during 2010 to 2011 among all open quarries in Deqing County of Zhejiang Province, China. The investigation included basic information of the quarries, the occupational health situation and noise intensity at the workplace, and the hearing loss of workers exposed to noise in quarry enterprises. The hearing test results were evaluated based on the Diagnostic criteria of occupational noise-induced hearing loss (GBZ 49-2007). A total of 25 enterprises with open quarries were investigated, of which only 30.4% (17/56) workplaces met the national standard. The median noise level was 92.5 dB (A). Fifty-four (10.6%) out of 508 workers in the 25 enterprises were diagnosed with binaural hearing loss in the initial physical examination, with 18.3% (93/508) under surveillance. The rate of normal hearing among crushing workers, mechanists, drilling workers, and blasting workers ranged between 27.6% and 41.4%, which was significantly lower than that among workers exposed to slight noise hazards (80.0%) or other workers (63.7%) (P < 0.05). With increasing working years, the binaural hearing loss of crushing workers became serious. Serious occupational noise hazards existed in most jobs in open quarries, with crushing workers, mechanists, drilling workers, and blasting workers most seriously jeopardized. Among crushing workers, those working in the first-line or unprotected second?line positions suffered more than the others. Further measures should be taken by the supervision department and the enterprises to control the noise hazards in open quarries.
-
Park, Jungsun; Han, Bo-Young; Kim, Yangho
2017-04-01
The present study examines gender differences in occupations, occupational hazards, and musculoskeletal symptoms in Korean workers. We performed a secondary analysis of data from the fourth Korean Working Conditions Survey (KWCS). Relative to "managers," men who were "craft and related trades workers," "equipment, machine operating and assembling workers," and in "elementary occupations" were more likely to report back pain (ORs: 2.08, 2.33, and 2.71, respectively); women who were "skilled agricultural, forestry, and fishery workers" were more likely to report back pain (OR: 3.96). Back pain was more likely to be reported in men exposed to "carrying/moving heavy loads," "painful/tiring postures," and "repetitive hand/arm movements" (ORs: 1.20, 2.26, and 1.28, respectively). Men and women workers differed in their reporting of ergonomic risk factors, and complaints of musculoskeletal symptoms. Am. J. Ind. Med. 60:342-349, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.
-
Ant workers exhibit specialization and memory during raft formation.
Avril, Amaury; Purcell, Jessica; Chapuisat, Michel
2016-06-01
By working together, social insects achieve tasks that are beyond the reach of single individuals. A striking example of collective behaviour is self-assembly, a process in which individuals link their bodies together to form structures such as chains, ladders, walls or rafts. To get insight into how individual behavioural variation affects the formation of self-assemblages, we investigated the presence of task specialization and the role of past experience in the construction of ant rafts. We subjected groups of Formica selysi workers to two consecutive floods and monitored the position of individuals in rafts. Workers showed specialization in their positions when rafting, with the same individuals consistently occupying the top, middle, base or side position in the raft. The presence of brood modified workers' position and raft shape. Surprisingly, workers' experience in the first rafting trial with brood influenced their behaviour and raft shape in the subsequent trial without brood. Overall, this study sheds light on the importance of workers' specialization and memory in the formation of self-assemblages.
-
Dewey, Robin
2011-01-01
In the United States, approximately 125,000 people with disabilities are employed through Community Rehabilitation Programs in manufacturing, assembly, and service jobs. These jobs have significant hazards and, consequently, the workers are at risk of injury. Training that empowers workers to participate in prevention efforts can help reduce work-related injuries. In general this kind of health and safety training in the United States is limited. It is even more so for workers with intellectual disabilities, in part because there have not been programs for teaching individuals with cognitive challenges health and safety skills, adapted to their learning needs. This paper describes the development and promotion of the Staying Safe at Work curriculum of UC Berkeley's Labor Occupational Health Program, which is designed for use by support agencies and employers of workers with intellectual disabilities. The goal of this program is to teach these workers essential occupational safety and health skills in a manner they can understand.
-
Ant workers exhibit specialization and memory during raft formation
NASA Astrophysics Data System (ADS)
Avril, Amaury; Purcell, Jessica; Chapuisat, Michel
2016-06-01
By working together, social insects achieve tasks that are beyond the reach of single individuals. A striking example of collective behaviour is self-assembly, a process in which individuals link their bodies together to form structures such as chains, ladders, walls or rafts. To get insight into how individual behavioural variation affects the formation of self-assemblages, we investigated the presence of task specialization and the role of past experience in the construction of ant rafts. We subjected groups of Formica selysi workers to two consecutive floods and monitored the position of individuals in rafts. Workers showed specialization in their positions when rafting, with the same individuals consistently occupying the top, middle, base or side position in the raft. The presence of brood modified workers' position and raft shape. Surprisingly, workers' experience in the first rafting trial with brood influenced their behaviour and raft shape in the subsequent trial without brood. Overall, this study sheds light on the importance of workers' specialization and memory in the formation of self-assemblages.
-
90. Neg. No. F59A, Apr 13, 1930, INTERIORASSEMBLY BUILDING, CHASSIS ...
90. Neg. No. F-59A, Apr 13, 1930, INTERIOR-ASSEMBLY BUILDING, CHASSIS LINE, LOOKING SOUTH - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
VAGUE: a graphical user interface for the Velvet assembler.
Powell, David R; Seemann, Torsten
2013-01-15
Velvet is a popular open-source de novo genome assembly software tool, which is run from the Unix command line. Most of the problems experienced by new users of Velvet revolve around constructing syntactically and semantically correct command lines, getting input files into acceptable formats and assessing the output. Here, we present Velvet Assembler Graphical User Environment (VAGUE), a multi-platform graphical front-end for Velvet. VAGUE aims to make sequence assembly accessible to a wider audience and to facilitate better usage amongst existing users of Velvet. VAGUE is implemented in JRuby and targets the Java Virtual Machine. It is available under an open-source GPLv2 licence from http://www.vicbioinformatics.com/. torsten.seemann@monash.edu.
-
Automated solar panel assembly line
NASA Technical Reports Server (NTRS)
Somberg, H.
1981-01-01
The initial stage of the automated solar panel assembly line program was devoted to concept development and proof of approach through simple experimental verification. In this phase, laboratory bench models were built to demonstrate and verify concepts. Following this phase was machine design and integration of the various machine elements. The third phase was machine assembly and debugging. In this phase, the various elements were operated as a unit and modifications were made as required. The final stage of development was the demonstration of the equipment in a pilot production operation.
-
New workers' compensation legislation: expected pharmaceutical cost savings.
Wilson, Leslie; Gitlin, Matthew
2005-10-01
California Workers' Compensation (WC) system costs are under review. With recently approved California State Assembly Bill (AB) 749 and Senate Bill (SB) 228, an assessment of proposed pharmaceutical cost savings is needed. A large workers' compensation database provided by the California Workers' Compensation Institute (CWCI) and Medi-Cal pharmacy costs obtained from the State Drug Utilization Project are utilized to compare frequency, costs and savings to Workers' Compensation in 2002 with the new pharmacy legislation. Compared to the former California Workers' Compensation fee schedule, the newly implemented 100% Medi-Cal fee schedule will result in savings of 29.5% with a potential total pharmacy cost savings of $125 million. Further statistical analysis demonstrated that a large variability in savings across drugs could not be controlled with this drug pricing system. Despite the large savings in pharmaceuticals, inconsistencies between the two pharmaceutical payment systems could lead to negative incentives and uncertainty for long-term savings. Proposed alternative pricing systems could be considered. However, pain management implemented along with other cost containment strategies could more effectively reduce overall drug spending in the workers' compensation system.
-
1965-01-01
In one of the initial assembly steps for the first stage (S-IB stage) of the Saturn IB launch vehicle, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, position a "Spider Beam" to the central liquid-oxygen tank of the S-IB stage. Developed by the Marshall Space Flight Center (MSFC) and built by the Chrysler Corporation at MAF, the S-IB stage utilized eight H-1 engines to produce a combined thrust of 1,600,000 pounds.
-
82. Neg. No. F66A, Apr 13, 1930, INTERIORASSEMBLY BUILDING, TRIM ...
82. Neg. No. F-66A, Apr 13, 1930, INTERIOR-ASSEMBLY BUILDING, TRIM LINE AND GLASS DEPARTMENTS - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
78. Neg. No. F143A, Apr 1, 1932, INTERIORASSEMBLY BUILDING, CONVEYOR ...
78. Neg. No. F-143A, Apr 1, 1932, INTERIOR-ASSEMBLY BUILDING, CONVEYOR LINE WITH CAR CHASSIS - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA
-
Focus Groups Move Online: Feasibility of Tumblr Use for eHealth Curriculum Development.
Elliot, Diane; Rohlman, Diane; Parish, Megan
2015-03-27
Constructing successful online programs requires engaging potential users in development. However, assembling focus groups can be costly and time consuming. The aim of this study is to assess whether Tumblr can be used to prioritize activities for an online younger worker risk reduction and health promotion program. Younger summer parks and recreation employees were encouraged to visit Tumblr using weekly announcements and competitions. Each week, new activities were posted on Tumblr with linked survey questions. Responses were downloaded and analyzed. An average of 36 young workers rated each activity on its likeability and perceived educational value. The method was feasible, efficient, and sustainable across the summer weeks. Ratings indicated significant differences in likeability among activities (P<.005). Tumblr is a means to crowdsource formative feedback on potential curricular components when assembling an online intervention. This paper describes its initial use as well as suggestions for future refinements.
-
Intelligent editor/printer enhancements
NASA Technical Reports Server (NTRS)
Woodfill, M. C.; Pheanis, D. C.
1983-01-01
Microprocessor support hardware, software, and cross assemblers relating to the Motorola 6800 and 6809 process systems were developed. Pinter controller and intelligent CRT development are discussed. The user's manual, design specifications for the MC6809 version of the intelligent printer controller card, and a 132-character by 64-line intelligent CRT display system using a Motorola 6809 MPU, and a one-line assembler and disassembler are provided.
-
Rosenbaum, Daryl A; Mora, Dana C; Arcury, Thomas A; Chen, Haiying; Quandt, Sara A
2014-01-01
Between-employer differences in working conditions may lead to variable injury rates. The objective of this paper is to assess the difference in the prevalence of epicondylitis, rotator cuff syndrome, and low back pain among immigrant Latino poultry workers at plants of three different employers. Data were collected from a cross-sectional study among 286 poultry processing workers. Community-based sampling was used to recruit participants in western North Carolina. Rotator cuff syndrome (26.7%) and low back pain (27.9%) were more prevalent among employees of one specific employer. Multivariate analysis showed significant associations of low back pain and rotator cuff syndrome with age, task performed in the processing line, and employer. Employer is a major predictor of musculoskeletal disorders and pain. Line speed and work pace may account for these differences and provide an opportunity for regulation and intervention to protect the health of workers.
-
Bena, Antonella; Berchialla, Paola; Coffano, Elena; Debernardi, Marialuisa; Icardi, L; Dettoni, Luisa
2009-01-01
There is little evidence in the literature to suggest that safety training is effective in reducing injuries at the workplace. This study aimed at assessing the impact of a safety training programme on injury rates during construction work on the Turin-Novara high-speed railway line (2002-2006). We adopted a before-after study design. Since workers were enrolled and trained at different times, pre- and post-training periods were calculated individually for each worker At the end of the training programme, the incidence of occupational injuries had fallen by 16% in the case of basic training and 25% for specific training. In the construction workers group (63.5% of trained workers) the reductions were 21% for basic training and 27% for specific training. All variations were statistically significant. Implementation of the training programme described led to a reduction in injury rates.
-
A Demonstrator Intelligent Scheduler For Sensor-Based Robots
NASA Astrophysics Data System (ADS)
Perrotta, Gabriella; Allen, Charles R.; Shepherd, Andrew J.
1987-10-01
The development of an execution module capable of functioning as as on-line supervisor for a robot equipped with a vision sensor and tactile sensing gripper system is described. The on-line module is supported by two off-line software modules which provide a procedural based assembly constraints language to allow the assembly task to be defined. This input is then converted into a normalised and minimised form. The host Robot programming language permits high level motions to be issued at the to level, hence allowing a low programming overhead to the designer, who must describe the assembly sequence. Components are selected for pick and place robot movement, based on information derived from two cameras, one static and the other mounted on the end effector of the robot. The approach taken is multi-path scheduling as described by Fox pi. The system is seen to permit robot assembly in a less constrained parts presentation environment making full use of the sensory detail available on the robot.
-
Effects of selection for honey bee worker reproduction on foraging traits.
Oldroyd, Benjamin P; Beekman, Madeleine
2008-03-04
The "reproductive ground plan" hypothesis (RGPH) proposes that reproductive division of labour in social insects had its antecedents in the ancient gene regulatory networks that evolved to regulate the foraging and reproductive phases of their solitary ancestors. Thus, queens express traits that are characteristic of the reproductive phase of solitary insects, whereas workers express traits characteristic of the foraging phase. The RGPH has also been extended to help understand the regulation of age polyethism within the worker caste and more recently to explain differences in the foraging specialisations of individual honey bee workers. Foragers that specialise in collecting proteinaceous pollen are hypothesised to have higher reproductive potential than individuals that preferentially forage for nectar because genes that were ancestrally associated with the reproductive phase are active. We investigated the links between honey bee worker foraging behaviour and reproductive traits by comparing the foraging preferences of a line of workers that has been selected for high rates of worker reproduction with the preferences of wild-type bees. We show that while selection for reproductive behaviour in workers has not altered foraging preferences, the age at onset of foraging of our selected line has been increased. Our findings therefore support the hypothesis that age polyethism is related to the reproductive ground plan, but they cast doubt on recent suggestions that foraging preferences and reproductive traits are pleiotropically linked.
-
Return-to-work challenges following a work-related mild TBI: The injured worker perspective.
Mansfield, Elizabeth; Stergiou-Kita, Mary; Cassidy, John David; Bayley, Mark; Mantis, Steve; Kristman, Vicki; Kirsh, Bonnie; Gomez, Manuel; Jeschke, Mark G; Vartanian, Oshin; Moody, Joel; Colantonio, Angela
2015-01-01
To explore how individuals with work-related mild traumatic brain injury (wrMTBI) experience return-to-work (RTW) processes when returning to the workplace where the injury occurred. RTW experiences were explored using in-depth interviews and an inductive analytic approach. Qualitative analysis guided by the research question moved through phases of line-by-line and thematic coding through which categories and the interaction between categories emerged. Twelve workers diagnosed with a wrMTBI reported on their RTW experiences following wrMTBIs that occurred 3-5 years prior to the time of the interview. Participants perceived employer and workers' compensation factors as profoundly influencing their RTW experiences. Participants consistently reported that employers and workers' compensation representatives had an inadequate understanding of wrMTBI sequelae. Six of 12 participants were re-injured following their wrMTBI, with three of these injuries occurring at work. Employers, co-workers and workers' compensation representatives should be aware of wrMTBI sequelae so injured workers can receive appropriate supports and both stigmatization and re-injury can be mitigated. Greater attention to the structural and social elements of workplace and compensation environments could inform strategies to break down barriers to successful return-to-work following a wrMTBI.
-
Return-to-work challenges following a work-related mild TBI: The injured worker perspective.
Mansfield, Elizabeth; Stergiou-Kita, Mary; Cassidy, John David; Bayley, Mark; Mantis, Steve; Kristman, Vicki; Kirsh, Bonnie; Gomez, Manuel; Jeschke, Mark G; Vartanian, Oshin; Moody, Joel; Colantonio, Angela
2015-08-07
To explore how individuals with work-related mild traumatic brain injury (wrMTBI) experience return-to-work (RTW) processes when returning to the workplace where the injury occurred. RTW experiences were explored using in-depth interviews and an inductive analytic approach. Qualitative analysis guided by the research question moved through phases of line-by-line and thematic coding through which categories and the interaction between categories emerged. Twelve workers diagnosed with a wrMTBI reported on their RTW experiences following wrMTBIs that occurred 3-5 years prior to the time of the interview. Participants perceived employer and workers' compensation factors as profoundly influencing their RTW experiences. Participants consistently reported that employers and workers' compensation representatives had an inadequate understanding of wrMTBI sequelae. Six of 12 participants were re-injured following their wrMTBI, with three of these injuries occurring at work. Employers, co-workers and workers' compensation representatives should be aware of wrMTBI sequelae so injured workers can receive appropriate supports and both stigmatization and re-injury can be mitigated. Greater attention to the structural and social elements of workplace and compensation environments could inform strategies to break down barriers to successful return-to-work following a wrMTBI.
-
Wagner, Drew T; Zhang, Zhicheng; Meoded, Roy A; Cepeda, Alexis J; Piel, Jörn; Keatinge-Clay, Adrian T
2018-04-20
trans-Acyltransferase assembly lines possess enzymatic domains often not observed in their better characterized cis-acyltransferase counterparts. Within this repertoire of largely unexplored biosynthetic machinery is a class of enzymes called the pyran synthases that catalyze the formation of five- and six-membered cyclic ethers from diverse polyketide chains. The 1.55 Å resolution crystal structure of a pyran synthase domain excised from the ninth module of the sorangicin assembly line highlights the similarity of this enzyme to the ubiquitous dehydratase domain and provides insight into the mechanism of ring formation. Functional assays of point mutants reveal the central importance of the active site histidine that is shared with the dehydratases as well as the supporting role of a neighboring semiconserved asparagine.
-
Paid to Persuade: Careers in Sales
ERIC Educational Resources Information Center
Torpey, Elka Maria
2011-01-01
Workers who make a living in sales are paid to persuade others to buy goods and services. Just about anything, from apricots to zip-line tours, needs an intermediary to move from producer to buyer. That go-between person is the sales worker. Sales jobs are numerous. In May 2010, there were over 13 million wage and salary sales workers in the…
-
HERALD OF COMMUNICATIONS, 1963. VOL. 23, NO. 1(274).
enterprises and methods of raising it Green lights for the long distance through calls Organization of delivery service in Voronezh Communication workers ...of Ukrainian SSR can and must work better Production problems are at the center of attention This is the way Soviet communication workers act...Competition for the title ’’Communist-labor main line’’ Literature for communication workers
-
A review on simple assembly line balancing type-e problem
NASA Astrophysics Data System (ADS)
Jusop, M.; Rashid, M. F. F. Ab
2015-12-01
Simple assembly line balancing (SALB) is an attempt to assign the tasks to the various workstations along the line so that the precedence relations are satisfied and some performance measure are optimised. Advanced approach of algorithm is necessary to solve large-scale problems as SALB is a class of NP-hard. Only a few studies are focusing on simple assembly line balancing of Type-E problem (SALB-E) since it is a general and complex problem. SALB-E problem is one of SALB problem which consider the number of workstation and the cycle time simultaneously for the purpose of maximising the line efficiency. This paper review previous works that has been done in order to optimise SALB -E problem. Besides that, this paper also reviewed the Genetic Algorithm approach that has been used to optimise SALB-E. From the reviewed that has been done, it was found that none of the existing works are concern on the resource constraint in the SALB-E problem especially on machine and tool constraints. The research on SALB-E will contribute to the improvement of productivity in real industrial application.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-26
... Machines (IBM), Large Panel Assembly and Test Division (LPAT), Manpower. 81,982 Leistritz Rural Hall, NC..., Inc., Outbound PA. Customer Service Team. 82,074 Komax Solar, Inc., York, PA. Komax Holdings AG...
-
EVALUATION OF A MULTIFUNCTIONAL VALVE ASSEMBLY IN A DIRECT EXPANSION REFRIGERATION SYSTEM REPORT
The report describes the performance, including energy consumption, of a refrigeration system incorporating a multifunctional valve (MXV assembly). The MXV assembly (consisting of additional liquid line, an XTC valve, and a larger thermostatic expansion valve) was installed on al...
-
Lean manufacturing comes to China: a case study of its impact on workplace health and safety.
Brown, Garrett D; O'Rourke, Dara
2007-01-01
Lean manufacturing, which establishes small production "cells," or teams of workers, who complete an entire product from raw material processing through final assembly and shipment, increases health and safety hazards by mixing previously separated exposures to various chemicals (with possible additive and cumulative effects) and noise. The intensification of work leads to greater ergonomic and stress-related adverse health effects, as well as increased safety hazards. The standard industrial hygiene approach of anticipation, recognition, evaluation, and hazard control is applicable to lean operations. A focus on worker participation in identifying and solving problems is critical for reducing negative impacts. A key to worker safety in lean production operations is the development of informed, empowered, and active workers with the knowledge, skills, and opportunity to act in the workplace to eliminate or reduce hazards.
-
Improving Energy Efficiency for the Vehicle Assembly Industry: A Discrete Event Simulation Approach
NASA Astrophysics Data System (ADS)
Oumer, Abduaziz; Mekbib Atnaw, Samson; Kie Cheng, Jack; Singh, Lakveer
2016-11-01
This paper presented a Discrete Event Simulation (DES) model for investigating and improving energy efficiency in vehicle assembly line. The car manufacturing industry is one of the highest energy consuming industries. Using Rockwell Arena DES package; a detailed model was constructed for an actual vehicle assembly plant. The sources of energy considered in this research are electricity and fuel; which are the two main types of energy sources used in a typical vehicle assembly plant. The model depicts the performance measurement for process- specific energy measures of painting, welding, and assembling processes. Sound energy efficiency model within this industry has two-fold advantage: reducing CO2 emission and cost reduction associated with fuel and electricity consumption. The paper starts with an overview of challenges in energy consumption within the facilities of automotive assembly line and highlights the parameters for energy efficiency. The results of the simulation model indicated improvements for energy saving objectives and reduced costs.
-
Assembly-line Simulation Program
NASA Technical Reports Server (NTRS)
Chamberlain, Robert G.; Zendejas, Silvino; Malhotra, Shan
1987-01-01
Costs and profits estimated for models based on user inputs. Standard Assembly-line Manufacturing Industry Simulation (SAMIS) program generalized so useful for production-line manufacturing companies. Provides accurate and reliable means of comparing alternative manufacturing processes. Used to assess impact of changes in financial parameters as cost of resources and services, inflation rates, interest rates, tax policies, and required rate of return of equity. Most important capability is ability to estimate prices manufacturer would have to receive for its products to recover all of costs of production and make specified profit. Written in TURBO PASCAL.
-
1969-01-01
In the "clustering" procedure, an initial assembly step for the first stage (S-IB stage) of the Saturn IB launch vehicle, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, place the first of eight outboard fuel tanks (left) next to the central liquid-oxygen tank of S-IB stage. Developed by the Marshall Space Flight Center (MSFC) and built by the Chrysler Corporation at MAF, the S-IB stage utilized eight H-1 engines to produce a combined thrust of 1,600,000 pounds.
-
1969-01-01
In the clustering procedure, an initial assembly step for the first stage (S-IB stage) of the Saturn IB launch vehicle, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, place the first of eight outboard fuel tanks next to the central liquid-oxygen tank of the S-IB stage. Developed by the Marshall Space Flight Center (MSFC) and built by the Chrysler Corporation at MAF, the S-IB stage utilized eight H-1 engines to produce a combined thrust of 1,600,000 pounds.
-
1967-11-01
This image depicts a Boeing worker installing an F-1 engine on the Saturn V S-IC flight stage at the Michoud Assembly Facility (MAF). The Saturn IB and Saturn V first stages were manufactured at the MAF, located 24 kilometers (approximately 15 miles) east of downtown New Orleans, Louisiana. The prime contractors, Chrysler and Boeing, jointly occupied the MAF. The basic manufacturing building boasted 43 acres under one roof. By 1964, NASA added a separate engineering and office building, vertical assembly building, and test stage building.
-
A global assembly line to cyanobactins
Donia, Mohamed S.; Ravel, Jacques; Schmidt, Eric W.
2009-01-01
More than 100 cyclic peptides harboring heterocyclized residues are known from marine ascidians, sponges and different genera of cyanobacteria. Here, we report an assembly line responsible for the biosynthesis of these diverse peptides, now called cyanobactins, both in symbiotic and free-living cyanobacteria. By comparing five new cyanobactin biosynthetic clusters, we could produce the prenylated antitumor preclinical candidate, trunkamide, in E. coli culture using genetic engineering. PMID:18425112
-
Code of Federal Regulations, 2014 CFR
2014-10-01
..., health care quality, or health care outcomes; and (A) Which are assembled or developed by a provider for... (includes a group practice), long term care facility, behavior health residential treatment facility..., psychologist, certified social worker, registered dietitian or nutrition professional, physical or occupational...
-
Code of Federal Regulations, 2013 CFR
2013-10-01
..., health care quality, or health care outcomes; and (A) Which are assembled or developed by a provider for... (includes a group practice), long term care facility, behavior health residential treatment facility..., psychologist, certified social worker, registered dietitian or nutrition professional, physical or occupational...
-
Code of Federal Regulations, 2012 CFR
2012-10-01
..., health care quality, or health care outcomes; and (A) Which are assembled or developed by a provider for... (includes a group practice), long term care facility, behavior health residential treatment facility..., psychologist, certified social worker, registered dietitian or nutrition professional, physical or occupational...
-
Silva, Alessandro Jose Nunes da; Almeida, Ildeberto Muniz de; Vilela, Rodolfo Andrade de Gouveia; Mendes, Renata Wey Berti; Hurtado, Sandra Lorena Beltran
2018-05-10
The Brazilian electricity sector has recorded high work-related mortality rates that have been associated with outsourcing, used to cut costs. In order to decrease the power outage time for consumers, the industry adopted the automatic circuit recloser as the technical solution. The device has hazardous implications for maintenance workers. The aim of this study was to analyze the origins and consequences of work accidents in power systems with automatic circuit recloser, using the Accident Analysis and Prevention (AAP) model. The AAP model was used to investigate two work accidents, aimed to explore the events' organizational origins. Case 1 - when changing a deenergized secondary line, a worker received a shock from the energized primary cable (13.8kV). The system reclosed three times, causing severe injury to the worker (amputation of a lower limb). Case 2 - a fatal work accident occurred during installation of a new crosshead on a partially insulated energized line. The tip of a metal cross arm section strap touched the energized secondary line and electrocuted the maintenance operator. The circuit breaker component of the automatic circuit recloser failed. The analyses revealed how business management logic can participate in the root causes of work accidents through failures in maintenance management, outsourced workforce management, and especially safety management in systems with reclosers. Decisions to adopt automation to guarantee power distribution should not overlook the risks to workers in overhead power lines or fail to acknowledge the importance of ensuring safe conditions.
-
Madura, Kiran
2013-01-01
The assembly of the proteasome — the cellular machine that eliminates unwanted proteins — is a carefully choreographed affair, involving a complex sequence of steps overseen by dedicated protein chaperones. PMID:19516331
-
8. VIEW TO EAST SHOWING PORTION OF WEST ELEVATION OF ...
8. VIEW TO EAST SHOWING PORTION OF WEST ELEVATION OF ASSEMBLY AREA. MAIN ASSEMBLY LINE RAN FROM RIGHT TO LEFT ALONG THE FIRST-FLOOR WINDOWS. PARTS STORAGE WAS ON SECOND FLOOR. - Rosie the Riveter National Historical Park, Ford Assembly Plant, 1400 Harbour Way South, Richmond, Contra Costa County, CA
-
78 FR 9796 - Airworthiness Directives; Cessna Aircraft Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-12
... against the right steering tube assembly during rudder pedal actuation. This AD requires you to install... between the fuel return line assembly and the steering tube assembly and clearance between the fuel return...://www.cessnasupport.com . You may review copies of the referenced service information at the FAA, Small...
-
ERIC Educational Resources Information Center
Henry, Nina
This competency-based preservice home economics teacher education module on assembly line garment construction is the second in a set of three modules on occupational aspects of textiles and clothing. (This set is part of a larger series of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking Education [MATCHE]--see…
-
The relationship between physical workload and quality within line-based assembly.
Ivarsson, Anna; Eek, Frida
2016-07-01
Reducing costs and improvement of product quality are considered important to ensure productivity within a company. Quality deviations during production processes and ergonomics have previously shown to be associated. This study explored the relationship between physical workload and real (found during production processes) and potential (need of extra time and assistance to complete tasks) quality deviations in a line-based assembly plant. The physical workload on and the work rotation between 52 workstations were assessed. As the outcome, real and potential quality deviations were studied during 10 weeks. Results show that workstations with higher physical workload had significantly more real deviations compared to lower workload stations. Static work posture had significantly more potential deviations. Rotation between high and low workload was related to fewer quality deviations compared to rotation between only high workload stations. In conclusion, physical ergonomics seems to be related to real and potential quality deviation within line-based assembly. Practitioner Summary: To ensure good productivity in manufacturing industries, it is important to reduce costs and improve product quality. This study shows that high physical workload is associated with quality deviations and need of extra time and assistance to complete tasks within line-based assembly, which can be financially expensive for a company.
-
NASA Astrophysics Data System (ADS)
Seha, S.; Zamberi, J.; Fairu, A. J.
2017-10-01
Material handling system (MHS) is an important part for the productivity plant and has recognized as an integral part of today’s manufacturing system. Currently, MHS has growth tremendously with its technology and equipment type. Based on the case study observation, the issue involving material handling system contribute to the reduction of production efficiency. This paper aims to propose a new design of integration between material handling and manufacturing layout by investigating the influences of layout and material handling system. A method approach tool using Delmia Quest software is introduced and the simulation result is used to assess the influences of the integration between material handling system and manufacturing layout in the performance of automotive assembly line. The result show, the production of assembly line output increases more than 31% from the current system. The source throughput rate average value went up to 252 units per working hour in model 3 and show the effectiveness of the pick-to-light system as efficient storage equipment. Thus, overall result shows, the application of AGV and the pick-to-light system gave a large significant effect in the automotive assembly line. Moreover, the change of layout also shows a large significant improvement to the performance.
-
Calderone, Christopher T.; Bumpus, Stefanie B.; Kelleher, Neil L.; Walsh, Christopher T.; Magarvey, Nathan A.
2008-01-01
The polyketide signaling metabolites bacillaene and dihydrobacillaene are biosynthesized in Bacillus subtilis on an enzymatic assembly line with both nonribosomal peptide synthetase (NRPS) and polyketide synthase (PKS) modules acting along with catalytic domains servicing the assembly line in trans. These signaling metabolites possess the unusual starter unit α-hydroxyisocaproate (α-HIC). We show here that it arises from initial activation of α-ketoisocaproate (α-KIC) by the first adenylation domain of PksJ (a hybrid PKS/NRPS) and installation on the pantetheinyl arm of the adjacent thiolation (T) domain. The α-KIC unit is elongated to α-KIC-Gly by the second NRPS module in PksJ as demonstrated by mass spectrometric analysis. The third module of PksJ uses PKS logic and contains an embedded ketoreductase (KR) domain along with two adjacent T domains. We show that this KR domain reduces canonical 3-ketobutyryl chains but also the α-keto group of α-KIC-containing intermediates on the PksJ T-domain doublet. This KR activity accounts for the α-HIC moiety found in the dihydrobacillaene/bacillaene pair and represents an example of an assembly-line dual-function α- and β-KR acting on disparate positions of a growing chain intermediate. PMID:18723688
-
29 CFR Appendix E to Subpart M of... - Sample Fall Protection Plan
Code of Federal Regulations, 2014 CFR
2014-07-01
... edge of the floor or beam and swing the worker like a pendulum until the line has moved to a position... points. Accompanying this pendulum swing is a lowering of the worker, with the attendant danger that he...
-
Occupational fatalities due to electrocutions in the construction industry.
Janicak, Christopher A
2008-01-01
Occupational fatalities due to contact with electricity account for approximately 9% of all deaths in the construction industry and is the fourth leading cause of death in this industry. Differences in the proportions of electrocutions in the construction industry are significantly different from other industries based upon the age of the worker and the source of the electricity. This study found that, in the construction industry, the proportion of occupational fatalities due to contact with electric current is significantly higher for workers in the 16 to 19 years old age group. Contact with overhead power lines occurred more frequently with younger workers, while contact with electric wiring, transformers, and related equipment was found to occur more frequently with older workers. The proportion of fatalities due to this event was also found to account for a significantly greater proportion of fatalities in the construction industry overall. The proportions of electrocution fatalities in the construction industry were found to be significantly higher for younger workers when compared to all other industries. Focusing prevention measures toward younger workers who work near overhead power lines could have a significant impact upon death rates. For older workers, the focus should be on those who work on or near transformers, electrical wiring, and components. Across the construction industry, implementation of effective lockout-tagout programs, and verification of energy isolation, can prevent approximately 125 fatalities per year in the construction industry.
-
No facultative worker policing in the honey bee ( Apis mellifera L.)
NASA Astrophysics Data System (ADS)
Loope, Kevin J.; Seeley, Thomas D.; Mattila, Heather R.
2013-05-01
Kin selection theory predicts that in colonies of social Hymenoptera with multiply mated queens, workers should mutually inhibit ("police") worker reproduction, but that in colonies with singly mated queens, workers should favor rearing workers' sons instead of queens' sons. In line with these predictions, Mattila et al. (Curr Biol 22:2027-2031, 2012) documented increased ovary development among workers in colonies of honey bees with singly mated queens, suggesting that workers can detect and respond adaptively to queen mating frequency and raising the possibility that they facultative police. In a follow-up experiment, we test and reject the hypothesis that workers in single-patriline colonies prefer worker-derived males and are able to reproduce directly; we show that their eggs are policed as strongly as those of workers in colonies with multiply mated queens. Evidently, workers do not respond facultatively to a kin structure that favors relaxed policing and increased direct reproduction. These workers may instead be responding to a poor queen or preparing for possible queen loss.
-
No facultative worker policing in the honey bee (Apis mellifera L.).
Loope, Kevin J; Seeley, Thomas D; Mattila, Heather R
2013-05-01
Kin selection theory predicts that in colonies of social Hymenoptera with multiply mated queens, workers should mutually inhibit ("police") worker reproduction, but that in colonies with singly mated queens, workers should favor rearing workers' sons instead of queens' sons. In line with these predictions, Mattila et al. (Curr Biol 22:2027-2031, 2012) documented increased ovary development among workers in colonies of honey bees with singly mated queens, suggesting that workers can detect and respond adaptively to queen mating frequency and raising the possibility that they facultative police. In a follow-up experiment, we test and reject the hypothesis that workers in single-patriline colonies prefer worker-derived males and are able to reproduce directly; we show that their eggs are policed as strongly as those of workers in colonies with multiply mated queens. Evidently, workers do not respond facultatively to a kin structure that favors relaxed policing and increased direct reproduction. These workers may instead be responding to a poor queen or preparing for possible queen loss.
-
Cooperation between humans and robots in fine assembly
NASA Astrophysics Data System (ADS)
Jalba, C. K.; Konold, P.; Rapp, I.; Mann, C.; Muminovic, A.
2017-01-01
The development of ever smaller components in manufacturing processes require handling, assembling and testing of miniature similar components. The human eye meets its optical limits with ongoing miniaturization of parts, due to the fact that it is not able to detect particles with a size smaller than 0.11 mm or register distances below 0.07 mm - like separating gaps. After several hours of labour, workers cannot accurately differentiate colour nuances as well as constant quality of work cannot be guaranteed. Assembly is usually done with tools, such as microscopes, magnifiers or digital measuring devices. Due to the enormous mental concentration, quickly a fatigue process sets in. This requires breaks or change of task and reduces productivity. Dealing with handling devices such as grippers, guide units and actuators for component assembling, requires a time consuming training process. Often productivity increase is first achieved after years of daily training. Miniaturizations are ubiquitously needed, for instance in the surgery. Very small add-on instruments must be provided. In measurement, e.g. it is a technological must and a competitive advantage, to determine required data with a small-as-possible, highest-possible-resolution sensor. Solution: The realization of a flexible universal workstation, using standard robotic systems and image processing devices in cooperation with humans, where workers are largely freed up from highly strenuous physical and fine motoric work, so that they can do productive work monitoring and adjusting the machine assisted production process.
-
ERIC Educational Resources Information Center
Otto, Luther B.; And Others
This reference volume on career lines provides two sets of information for 384 different occupations or jobs. Two discussions preface the prototypes: (1) illustration of a career line and elaboration on the concepts and (2) discussion of job and worker characteristics that provide detailed information about each occupational grouping examined. The…
-
The ILO and the new UN convention on migrant workers: the past and future.
Bohning, R
1991-01-01
Migrant workers are less protected than nationals against the actions of states and employers. These workers therefore require special global protection of their rights while employed in countries other than their own. Accordingly, the UN International Labor Organization (ILO) is constitutionally charged with developing international measures to protect the interests of migrant workers from developing countries. The ILO, however, had little involvement in molding the International Convention on the protection of the Rights of All Migrants Workers and Members of their Families, adopted by the UN General Assembly in 1990. Instead, final adoption of the Convention stems largely from developing state dissatisfaction with the former 1975 ILO Migrant Workers Convention No. 143, and Mexican and Moroccan government machinations outside of the ILO in support of modifications. Convention No. 143 threatened to sever employment opportunities and hard foreign exchange remittances in North America and western Europe from illegally employed immigrant workers from developing countries. By working in the UN outside of the ILO, developing nations would enjoy automatic majority, and greater potential for success in reforming the Convention. Soon, developing nations squelched a delay tactic proffered by the Swedes, and succeeded in bringing the UN General Assembly to adopt resolution 34/172 in December 1979, which led to the establishment of an Open-Ended Working Group. This group then elaborated the 1990 Convention over 19 sessions. At the expense of the ILO and more developed nations, developing nations successfully challenged and changed the international order to benefit their peoples and national economies. Finally, the paper considers the interests of immigrant businesspeople and asylum seekers during or immediately upon entry to a foreign country, who are not specifically covered by the Convention. While the university of international humanitarian law suggests that businesspeople be included in the Convention, changes to the Convention will probably not be forthcoming. As for asylum seekers waiting for either refugee status or an interim-term engagement for work, the sensitive nature of this topic in certain countries precludes the adoption of inclusive documentation.
-
2001-04-03
KENNEDY SPACE CENTER, FLA. -- Spectators and photographers gather around the adult manatee Sea World workers are releasing into the Banana River in the background. The site is on the north side of the NASA Causeway, near Kennedy Space Center. On the horizon at left can be seen the Vehicle Assembly Building. The weight of the manatee requires a hoist to lift it. Earlier, workers released a calf. The two manatees recovered from injuries at Sea World. Manatees are frequently seen in the waters around Kennedy Space Center, which is surrounded by the Merritt Island National Wildlife Refuge
-
2001-01-17
Workers in the Payload Changeout Room check the U.S. Lab Destiny as its moves from Atlantis’ payload bay into the PCR. Destiny will remain in the PCR while Atlantis rolls back to the Vehicle Assembly Building to allow workers to conduct inspections, continuity checks and X-ray analysis on the 36 solid rocket booster cables located inside each booster’s system tunnel. An extensive evaluation of NASA’s SRB cable inventory revealed conductor damage in four (of about 200) cables on the shelf. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis
-
2001-01-17
Workers in the Payload Changeout Room check the U.S. Lab Destiny as its moves from Atlantis’ payload bay into the PCR. Destiny will remain in the PCR while Atlantis rolls back to the Vehicle Assembly Building to allow workers to conduct inspections, continuity checks and X-ray analysis on the 36 solid rocket booster cables located inside each booster’s system tunnel. An extensive evaluation of NASA’s SRB cable inventory revealed conductor damage in four (of about 200) cables on the shelf. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis
-
2009-02-21
CAPE CANAVERAL, Fla. – In the Assembly and Refurbishment Facility, or ARF, at NASA's Kennedy Space Center, workers help guide the frustum as a cable lifts it from the transporter. The last manufactured section of the Ares I-X test rocket, the frustum will be moved from the transporter to supports on the floor. Resembling a giant funnel, the frustum's function is to transition the primary flight loads from the rocket's upper stage to the first stage. The frustum is located between the forward skirt extension and the upper stage of the Ares I-X. The frustum will be integrated with the forward skirt and forward skirt extension, which already are in the ARF. That will complete the forward assembly. The assembly then will be moved to the Vehicle Assembly Building for stacking operations, which are scheduled to begin in April. Photo credit: NASA/Kim Shiflett
-
Gallus, Susanne; Lammers, Fritjof
2016-01-01
The autonomous transposable element LINE-1 is a highly abundant element that makes up between 15% and 20% of therian mammal genomes. Since their origin before the divergence of marsupials and placental mammals, LINE-1 elements have contributed actively to the genome landscape. A previous in silico screen of the Tasmanian devil genome revealed a lack of functional coding LINE-1 sequences. In this study we present the results of an in vitro analysis from a partial LINE-1 reverse transcriptase coding sequence in five marsupial species. Our experimental screen supports the in silico findings of the genome-wide degradation of LINE-1 sequences in the Tasmanian devil, and identifies a high frequency of degraded LINE-1 sequences in other Australian marsupials. The comparison between the experimentally obtained LINE-1 sequences and reference genome assemblies suggests that conclusions from in silico analyses of retrotransposition activity can be influenced by incomplete genome assemblies from short reads. PMID:27389686
-
Xie, X S; Qi, C; Du, X Y; Shi, W W; Zhang, M
2016-02-20
To investigate the features of hand-transmitted vibration of common vibration tools in the workplace for automobile casting and assembly. From September to October, 2014, measurement and spectral analysis were performed for 16 typical hand tools(including percussion drill, pneumatic wrench, grinding machine, internal grinder, and arc welding machine) in 6 workplaces for automobile casting and assembly according to ISO 5349-1-2001 Mechanical vibration-Measurement and evaluation of human exposure to hand-transmitted vibration-part 1: General requirements and ISO 5349-2-2001 Mechanical vibration-Measurement and evaluation of human exposure to hand-transmitted vibration-Part 2: Practical guidance for measurement in the workplace. The vibration acceleration waveforms of shearing machine, arc welding machine, and pneumatic wrench were mainly impact wave and random wave, while those of internal grinder, angle grinder, percussion drill, and grinding machine were mainly long-and short-period waves. The daily exposure duration to vibration of electric wrench, pneumatic wrench, shearing machine, percussion drill, and internal grinder was about 150 minutes, while that of plasma cutting machine, angle grinder, grinding machine, bench grinder, and arc welding machine was about 400 minutes. The range of vibration total value(ahv) was as follows: pneumatic wrench 0.30~11.04 m/s(2), grinding wheel 1.61~8.97 m/s(2), internal grinder 1.46~8.70 m/s(2), percussion drill 11.10~14.50 m/s(2), and arc welding machine 0.21~2.18 m/s(2). The workers engaged in cleaning had the longest daily exposure duration to vibration, and the effective value of 8-hour energy-equivalent frequency-weighted acceleration for them[A(8)] was 8.03 m/s(2), while this value for workers engaged in assembly was 4.78 m/s(2). The frequency spectrogram with an 1/3-time frequency interval showed that grinding machine, angle grinder, and percussion drill had a high vibration acceleration, and the vibration limit curve was recommended for those with a frequency higher than 400 min/d. The workers who are engaged in cleaning, grinding, and a few positions of assembly and use grinding machine, angle grinder, internal grinder, and percussion drill are exposed to vibrations with a high vibration acceleration and at a high position of the frequency spectrum. The hand-transmitted vibration in the positions of cutting, polishing, and cleaning in automobile casting has great harm, and the harm caused by pneumatic wrench in automobile assembly should be taken seriously.
-
Making a mixed-model line more efficient and flexible by introducing a bypass line
NASA Astrophysics Data System (ADS)
Matsuura, Sho; Matsuura, Haruki; Asada, Akiko
2017-04-01
This paper provides a design procedure for the bypass subline in a mixed-model assembly line. The bypass subline is installed to reduce the effect of the large difference in operation times among products assembled together in a mixed-model line. The importance of the bypass subline has been increasing in association with the rising necessity for efficiency and flexibility in modern manufacturing. The main topics of this paper are as follows: 1) the conditions in which the bypass subline effectively functions, and 2) how the load should be distributed between the main line and the bypass subline, depending on production conditions such as degree of difference in operation times among products and the mixing ratio of products. To address these issues, we analyzed the lower and the upper bounds of the line length. Based on the results, a design procedure and a numerical example are demonstrated.
-
Worldwide Report, Telecommunications Policy, Research and Development, No. 281.
1983-08-02
communications line. This line will automatically link Cotonou with Ouagadougou without having to pass through Paris. The agreement was signed this morning in... finished parts e.g. auto and motocycle assembly plants ^wKch most of the^time are wrongly referred to as "industries". . Unlike Brazil, Nigeria...tends to think that the machine tools factory will end up as these assembly plants of imported finished parts unless the government sets up other
-
Participatory ergonomic intervention for prevention of low back pain: assembly line redesign case.
Bernardes, João Marcos; Wanderck, Claudia; Moro, Antônio Renato Pereira
2012-01-01
This paper gives an overview of a participatory ergonomic intervention aimed at reducing low back pain cases in the dispatch department of a catalogue and e-commerce retail company. Based on the findings of the ergonomic analysis and design committee, the company's own employees redesigned the assembly line's layout. As a result of these changes two job tasks that involved manual material handling of boxes, identified by the revised NIOSH equation as posing an increased risk for lifting-related low back pain, were totally eliminated, and the employees responsible for moving boxes from the end of the assembly line to pallets on the ground were given more control over their jobs, and these jobs were also enriched with a new, less heavy task. These results demonstrate that participatory ergonomic interventions are a viable and effective strategy to reduce the exposure to work-related physical and psychosocial risk factors for low back pain.
-
A Protein Interaction Map of the Kalimantacin Biosynthesis Assembly Line
Uytterhoeven, Birgit; Lathouwers, Thomas; Voet, Marleen; Michiels, Chris W.; Lavigne, Rob
2016-01-01
The antimicrobial secondary metabolite kalimantacin (also called batumin) is produced by a hybrid polyketide/non-ribosomal peptide system in Pseudomonas fluorescens BCCM_ID9359. In this study, the kalimantacin biosynthesis gene cluster is analyzed by yeast two-hybrid analysis, creating a protein–protein interaction map of the entire assembly line. In total, 28 potential interactions were identified, of which 13 could be confirmed further. These interactions include the dimerization of ketosynthase domains, a link between assembly line modules 9 and 10, and a specific interaction between the trans-acting enoyl reductase BatK and the carrier proteins of modules 8 and 10. These interactions reveal fundamental insight into the biosynthesis of secondary metabolites. This study is the first to reveal interactions in a complete biosynthetic pathway. Similar future studies could build a strong basis for engineering strategies in such clusters. PMID:27853452
-
NASA Astrophysics Data System (ADS)
Liu, Qiong; Wang, Wen-xi; Zhu, Ke-ren; Zhang, Chao-yong; Rao, Yun-qing
2014-11-01
Mixed-model assembly line sequencing is significant in reducing the production time and overall cost of production. To improve production efficiency, a mathematical model aiming simultaneously to minimize overtime, idle time and total set-up costs is developed. To obtain high-quality and stable solutions, an advanced scatter search approach is proposed. In the proposed algorithm, a new diversification generation method based on a genetic algorithm is presented to generate a set of potentially diverse and high-quality initial solutions. Many methods, including reference set update, subset generation, solution combination and improvement methods, are designed to maintain the diversification of populations and to obtain high-quality ideal solutions. The proposed model and algorithm are applied and validated in a case company. The results indicate that the proposed advanced scatter search approach is significant for mixed-model assembly line sequencing in this company.
-
Savage, Mark E.; Mendel, Jr., Clifford W.
2001-01-01
A command triggered plasma opening switch assembly using an amplification stage. The assembly surrounds a coaxial transmission line and has a main plasma opening switch (POS) close to the load and a trigger POS upstream from the main POS. The trigger POS establishes two different current pathways through the assembly depended on whether it has received a trigger current pulse. The initial pathway has both POS's with plasma between their anodes and cathodes to form a short across the transmission line and isolating the load. The final current pathway is formed when the trigger POS receives a trigger current pulse which energizes its fast coil to push the conductive plasma out from between its anode and cathode, allowing the main transmission line current to pass to the fast coil of the main POS, thus pushing its plasma out the way so as to establish a direct current pathway to the load.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-15
... Airworthiness Directives; B/E Aerospace, Continuous Flow Passenger Oxygen Mask Assembly, Part Numbers 174006... to prevent the in-line flow indicators of the oxygen mask assembly from fracturing and separating, which could inhibit oxygen flow to the masks. This condition could consequently result in occupants...
-
Work at the Uddevalla Volvo Plant from the Perspective of the Demand-Control Model
ERIC Educational Resources Information Center
Lottridge, Danielle
2004-01-01
The Uddevalla Volvo plant represents a different paradigm for automotive assembly. In parallel-flow work, self-managed work groups assemble entire automobiles with comparable productivity as conventional series-flow assembly lines. From the perspective of the demand-control model, operators at the Uddevalla plant have low physical and timing…
-
Effects of aging and job demands on cognitive flexibility assessed by task switching.
Gajewski, Patrick D; Wild-Wall, Nele; Schapkin, Sergei A; Erdmann, Udo; Freude, Gabriele; Falkenstein, Michael
2010-10-01
In a cross-sectional, electrophysiological study 91 workers of a big car factory performed a series of switch tasks to assess their cognitive control functions. Four groups of workers participated in the study: 23 young and 23 middle aged assembly line employees and 22 young and 23 middle aged employees with flexible job demands like service and maintenance. Participants performed three digit categorisation tasks. In addition to single task blocks, a cue-based (externally guided) and a memory-based (internally guided) task switch block was administered. Compared to young participants, older ones showed the typical RT-decline. No differences between younger and older participants regarding the local switch costs could be detected despite the source of the current task information. In contrast, whereas the groups did not differ in mixing costs in the cued condition, clear performance decrements in the memory-based mixing block were observed in the group of older employees with repetitive work demands. These findings were corroborated by a number of electrophysiological results showing a reduced CNV suggesting an impairment of task specific preparation, an attenuated P3b suggesting reduced working memory capacity and a decreased Ne suggesting deficits in error monitoring in older participants with repetitive job demands. The results are compatible with the assumption that long lasting, unchallenging job demands may induce several neurocognitive impairments which are already evident in the early fifties. Longitudinal studies are needed to confirm this assumption. Copyright © 2010 Elsevier B.V. All rights reserved.
-
MASH test 3-11 of the TxDOT portable type 2 PCTB with sign support assembly
DOT National Transportation Integrated Search
2010-01-01
Portable concrete traffic barriers (PCTBs) are commonly used in work zones or in temporary median : barrier applications. PCTBs are needed for separation and channelization of vehicle movement and for : worker protection. Signage is often necessary w...
-
Shuttle Boosters stacked in the VAB
2007-01-04
Workers continue stacking the solid rocket boosters in highbay 1 inside Kennedy Space Center's Vehicle Assembly Building. The solid rocket boosters are being prepared for NASA's next Space Shuttle launch, mission STS-117. The mission is scheduled to launch aboard Atlantis no earlier than March 16, 2007.
-
ERIC Educational Resources Information Center
Becker, Aliza; And Others
1986-01-01
A Chicago vocational English language training program (VELT) conducted a needs assessment survey of employers of limited-English-proficient (LEP) workers in assembly, packing, shipping, janitorial and housekeeping, machine operation, and food preparation jobs. The purposes of the survey were to determine: (1) the employers' methods of obtaining…
-
2001-06-18
KENNEDY SPACE CENTER, Fla. -- In KSC’s Spacecraft Assembly and Encapsulation Facility -2, workers lower a canister over the Microwave Anisotropy Probe (MAP) before transporting to Launch Complex 17, Cape Canaveral Air Force Station. Launch of MAP via a Boeing Delta II rocket is scheduled for June 30.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-28
... assemblies; oil/fuel filters; air/oil separation equipment; air filters/elements; catalytic converters... assemblies; AC line filters; dielectric items of paper/plastic; capacitors; circuit breakers; switching...
-
2003-12-16
KENNEDY SPACE CENTER, FLA. - Workers accompany the orbiter Atlantis as it is towed back to the Orbiter Processing Facility after spending 10 days in the Vehicle Assembly Building. The hiatus in the VAB allowed work to be performed in the OPF that can only be accomplished while the bay is empty. Work included annual validation of the bay's cranes, work platforms, lifting mechanisms and jack stands. Work resumes to prepare Atlantis for launch in September 2004 on the first return-to-flight mission, STS-114.
-
MEMS Micro-Translation Device with Improved Linear Travel Capability
NASA Technical Reports Server (NTRS)
Abushagur, Mustafa A. G. (Inventor); Ferguson, Cynthia K. (Inventor); Nordin, Gregory P. (Inventor); English, Jennifer M. (Inventor)
2007-01-01
A microscopic translation device for a microelectromechanical system includes a pair of linear stator assemblies disposed in spaced relation to define an elongate channel. Each assembly is formed by a plurality of stators arranged in a row along the channel. A shuttle member is disposed between the stator assemblies for translating movement along the channel. The shuttle member includes a plurality of rotors extending outwardly from opposite sides. The shuttle is grounded through the stator assemblies and includes a mounting area for an object to be translated. Electrical lines are individually connected to alternate stators of a plurality of groups of the stators. A current supply sequentially supplies current through the electrical lines to the alternate stators so as to effect charging of the stators in a predetermined sequence. This produces a tangential capacitive force that causes translation of the shuttle.
-
Banking, Technology Workers and Their Career Development.
ERIC Educational Resources Information Center
Armstrong, Lesley; West, Jim
2001-01-01
An Australian bank developed a four-stage career development strategy for information technology workers: (1) career coaching sessions with executives; (2) career coaching seminars for line managers and team leaders; (3) staff career planning workshops; and (4) online career development support. The program resulted in increased satisfaction,…
-
Biphasic adaptation to osmotic stress in the C. elegans germ line.
Davis, Michael; Montalbano, Andrea; Wood, Megan P; Schisa, Jennifer A
2017-06-01
Cells respond to environmental stress in multiple ways. In the germ line, heat shock and nutritive stress trigger the assembly of large ribonucleoprotein (RNP) granules via liquid-liquid phase separation (LLPS). The RNP granules are hypothesized to maintain the quality of oocytes during stress. The goal of this study was to investigate the cellular response to glucose in the germ line and determine if it is an osmotic stress response. We found that exposure to 500 mM glucose induces the assembly of RNP granules in the germ line within 1 h. Interestingly, the RNP granules are maintained for up to 3 h; however, they dissociate after longer periods of stress. The RNP granules include processing body and stress granule proteins, suggesting shared functions. Based on several lines of evidence, the germ line response to glucose largely appears to be an osmotic stress response, thus identifying osmotic stress as a trigger of LLPS. Although RNP granules are not maintained beyond 3 h of osmotic stress, the quality of oocytes does not appear to decrease after longer periods of stress, suggesting a secondary adaptation in the germ line. We used an indirect marker of glycerol and observed high levels after 5 and 20 h of glucose exposure. Moreover, in gpdh-1;gpdh-2 germ lines, glycerol levels are reduced concomitant with RNP granules being maintained for an extended period. We speculate that increased glycerol levels may function as a secondary osmoregulatory adaptive response in the germ line, following a primary response of RNP granule assembly. Copyright © 2017 the American Physiological Society.
-
Advanced Space Transportation Program (ASTP)
1997-08-07
This double exposure depicts Marshall Space Flight Center's (MSFC) Test Stand 116 hosting a 60K Bantam Fastrac thrust chamber assembly test. The lower right exposure shows the engine firing in the test stand while the center exposure reveals workers monitoring the test in the interior block house of the test facility. The thrust chamber assembly is only part of the Fastrac engine project to build a low-cost engine for the X-34, an alternate light-weight unmarned launch vehicle. Both the nozzle and the engine for Fastrac are being manufactured at MSFC.
-
2009-03-21
CAPE CANAVERAL, Fla. – Inside the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers begin removing the shipping container from around the EXPRESS Logistics Carrier for the STS-129 mission. The carrier is part of the payload on space shuttle Atlantis, which will deliver to the International Space Station components including two spare gyroscopes, two nitrogen tank assemblies, two pump modules, an ammonia tank assembly and a spare latching end effector for the station's robotic arm. STS-129 is targeted to launch Nov. 12. Photo credit: NASA/Tim Jacobs
-
An Evaluation Of Holograms In Training And As Job Performance Aids
NASA Astrophysics Data System (ADS)
Frey, Allan H.
1986-08-01
Experimentation was carried out to evaluate holograms for use in training and as job aids. Holograms were compared against line drawings and photographs as methods of presenting visual information needed to accomplish a number of tasks. The dependent variables were assembly speed and assembly errors with people unstressed, assembly speed and assembly errors with people stressed, the percentage of discovered errors in assemblies, the number of correct assemblies misidentified as erroneous, and information extraction. Holograms generally were as good as or better visual aids than either photographs or line drawings. The use of holograms tends to reduce errors rather than speed assembly time in the assembly tasks used in these experiments. They also enhance the discovery of errors when the subject is attempting to locate assembly errors in a construction. The results of this experimentation suggest that serious consideration should be given to the use of holography in the development of job aids and in training. Besides these advantages for job aids, other advantages we found are that when page formated information is stored in man-readable holograms they are still useable when scratched or damaged even when similarly damaged microfilm is unuseable. Holography can also be used to store man and machine readable data simultaneously. Such storage would provide simplified backup in the event of machine failure, and it would permit the development of compatible machine and manual systems for job aid applications.
-
Modeling operational behavior of a disassembly line
NASA Astrophysics Data System (ADS)
Kizilkaya, Elif A.; Gupta, Surendra M.
2004-12-01
In this paper we present a dynamic kanban (pull) system specifically developed for disassembly lines. This type of kanban system is much more complex than the traditional kanban system used in assembly lines. For instance, unlike the assembly line where the external demand occurs only at the last station, the demands in the disassembly case also occur at any of the intermittent stations. The reason is that as a product moves on the disassembly line, various parts are disassembled at every station and accumulated at that station. Therefore, there are as many demand sources as there are number of parts. We consider a case example involving the end-of-life products. Based on the precedence relationships and other criteria such as hazardous properties of the parts, we balance the disassembly line. The results of the disassembly line-balancing problem (DLBP) are used as input to the proposed dynamic kanban system for disassembly line (DKSDL). We compare the performance of the DKSDL to the modified kanban system for disassembly line (MKSDL), which was previously introduced by the authors. We show, via simulation, that the DKSDL is far superior to MKSDL considered.
-
On the line: worker democracy and the struggle over occupational health and safety.
Granzow, Kara; Theberge, Nancy
2009-01-01
In this article we present a qualitative analysis of worker involvement in a participatory project to improve occupational health and safety at a Canadian manufacturing site. Based on interviews with workers in the plant, we consider the manner and degree to which workers experienced meaningful participation in the intervention process and some of the main barriers to worker participation. Findings emphasize the importance of the social and political context in conditioning the dynamics of joint management labor ventures specifically in relation to health initiatives. Interviews revealed few instances in which workers felt included in the participatory initiative; most often they felt marginalized. In the absence of structural change in the plant, workers described the health initiative as seriously limited in its ability to render meaningful worker participation. These results extend beyond this analysis of a participatory workplace health initiative, offering insights into the dynamics of institutional participatory process, and into participatory research practice generally.
-
Saggio, G; Conti, E; Valentini, F; De Sio, L; Capano, M Perrone
2010-01-01
The line B1 is a branch of the existing Metro line B in Rome. The route is long about 5 km, is completely underground and involves the construction of four new stations: Annibaliano, Libia /Gondar, Conca d'Oro and Jonio. The line will have a capacity of transport of 24,000 people/hour in each direction. The works started in 2006 involve about 500 workers. The report provides a statistical analysis of the events that occurred in the period 2005/2010 and aims to introduce the starting and management of this study, also on the basis of the "Operating procedures" issued by the acquisition of OSHAS 18001 certification from the agent of Metro B) / R.I.M.A.T.I. This analysis aims to provide to supervisors, to social security institutions and to workers, a usefull analysis tool in the prevention of the monitored events.
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-30
... not separately identifiable by product line. The initial investigation resulted in a positive... Application for Reconsideration By application dated August 17, 2010, a company official requested... equipment produced by the workers, and that this shift of production contributed importantly to worker group...
-
Temporal Progression of Visual Injury from Blast Exposure
2013-09-01
included the design and construction of a silencer and dump tank. The final design is shown in Figure 8. A steel barrel lined with 2” of acoustic foam...was selected as the dump tank. It surrounds a rubber barrel lined with foam composite. The steel barrel is allowed to recoil on a cart, absorbing...test. Figure 8. (Left) Inner silencer assembly completed during Q4 of Year 1. (Right) Final silencer assembly with the outer steel drum
-
Colibactin assembly line enzymes use S-adenosylmethionine to build a cyclopropane ring
Zha, Li; Jiang, Yindi; Henke, Matthew T.; Wilson, Matthew R.; Wang, Jennifer X.; Kelleher, Neil L.; Balskus, Emily P.
2017-01-01
Despite containing an α-amino acid, the versatile cofactor S-adenosylmethionine (SAM) is not a known building block for non-ribosomal peptide synthetase (NRPS) assembly lines. Here we report an unusual NRPS module from colibactin biosynthesis that uses SAM for amide bond formation and subsequent cyclopropanation. Our findings showcase a new use for SAM and reveal a novel biosynthetic route to a functional group that likely mediates colibactin’s genotoxicity. PMID:28805802
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hirsch, Candice N.; Hirsch, Cory D.; Brohammer, Alex B.
Intense artificial selection over the last 100 years has produced elite maize (Zea mays) inbred lines that combine to produce high-yielding hybrids. To further our understanding of how genome and transcriptome variation contribute to the production of high-yielding hybrids, we generated a draft genome assembly of the inbred line PH207 to complement and compare with the existing B73 reference sequence. B73 is a founder of the Stiff Stalk germplasm pool, while PH207 is a founder of Iodent germplasm, both of which have contributed substantially to the production of temperate commercial maize and are combined to make heterotic hybrids. Comparison ofmore » these two assemblies revealed over 2500 genes present in only one of the two genotypes and 136 gene families that have undergone extensive expansion or contraction. Transcriptome profiling revealed extensive expression variation, with as many as 10,564 differentially expressed transcripts and 7128 transcripts expressed in only one of the two genotypes in a single tissue. Genotype-specific genes were more likely to have tissue/condition-specific expression and lower transcript abundance. The availability of a high-quality genome assembly for the elite maize inbred PH207 expands our knowledge of the breadth of natural genome and transcriptome variation in elite maize inbred lines across heterotic pools.« less
-
Tahriri, Farzad; Dawal, Siti Zawiah Md; Taha, Zahari
2014-01-01
A new multiobjective dynamic fuzzy genetic algorithm is applied to solve a fuzzy mixed-model assembly line sequencing problem in which the primary goals are to minimize the total make-span and minimize the setup number simultaneously. Trapezoidal fuzzy numbers are implemented for variables such as operation and travelling time in order to generate results with higher accuracy and representative of real-case data. An improved genetic algorithm called fuzzy adaptive genetic algorithm (FAGA) is proposed in order to solve this optimization model. In establishing the FAGA, five dynamic fuzzy parameter controllers are devised in which fuzzy expert experience controller (FEEC) is integrated with automatic learning dynamic fuzzy controller (ALDFC) technique. The enhanced algorithm dynamically adjusts the population size, number of generations, tournament candidate, crossover rate, and mutation rate compared with using fixed control parameters. The main idea is to improve the performance and effectiveness of existing GAs by dynamic adjustment and control of the five parameters. Verification and validation of the dynamic fuzzy GA are carried out by developing test-beds and testing using a multiobjective fuzzy mixed production assembly line sequencing optimization problem. The simulation results highlight that the performance and efficacy of the proposed novel optimization algorithm are more efficient than the performance of the standard genetic algorithm in mixed assembly line sequencing model. PMID:24982962
-
Hirsch, Candice N.; Hirsch, Cory D.; Brohammer, Alex B.; ...
2016-11-01
Intense artificial selection over the last 100 years has produced elite maize (Zea mays) inbred lines that combine to produce high-yielding hybrids. To further our understanding of how genome and transcriptome variation contribute to the production of high-yielding hybrids, we generated a draft genome assembly of the inbred line PH207 to complement and compare with the existing B73 reference sequence. B73 is a founder of the Stiff Stalk germplasm pool, while PH207 is a founder of Iodent germplasm, both of which have contributed substantially to the production of temperate commercial maize and are combined to make heterotic hybrids. Comparison ofmore » these two assemblies revealed over 2500 genes present in only one of the two genotypes and 136 gene families that have undergone extensive expansion or contraction. Transcriptome profiling revealed extensive expression variation, with as many as 10,564 differentially expressed transcripts and 7128 transcripts expressed in only one of the two genotypes in a single tissue. Genotype-specific genes were more likely to have tissue/condition-specific expression and lower transcript abundance. The availability of a high-quality genome assembly for the elite maize inbred PH207 expands our knowledge of the breadth of natural genome and transcriptome variation in elite maize inbred lines across heterotic pools.« less
-
Soifer, Ilya; Barad, Omer; Shem-Tov, Doron; Baruch, Kobi; Lu, Fei; Hernandez, Alvaro G.; Wright, Chris L.; Koehler, Klaus; Buell, C. Robin; de Leon, Natalia
2016-01-01
Intense artificial selection over the last 100 years has produced elite maize (Zea mays) inbred lines that combine to produce high-yielding hybrids. To further our understanding of how genome and transcriptome variation contribute to the production of high-yielding hybrids, we generated a draft genome assembly of the inbred line PH207 to complement and compare with the existing B73 reference sequence. B73 is a founder of the Stiff Stalk germplasm pool, while PH207 is a founder of Iodent germplasm, both of which have contributed substantially to the production of temperate commercial maize and are combined to make heterotic hybrids. Comparison of these two assemblies revealed over 2500 genes present in only one of the two genotypes and 136 gene families that have undergone extensive expansion or contraction. Transcriptome profiling revealed extensive expression variation, with as many as 10,564 differentially expressed transcripts and 7128 transcripts expressed in only one of the two genotypes in a single tissue. Genotype-specific genes were more likely to have tissue/condition-specific expression and lower transcript abundance. The availability of a high-quality genome assembly for the elite maize inbred PH207 expands our knowledge of the breadth of natural genome and transcriptome variation in elite maize inbred lines across heterotic pools. PMID:27803309
-
1998-10-03
KENNEDY SPACE CENTER, FLA. -- Inside the payload bay of Space Shuttle orbiter Endeavour in Orbiter Processing Facility Bay 1, STS-88 Mission Specialists Jerry L. Ross (crouching at left) and James H. Newman (far right) get a close look at equipment. Looking on is Wayne Wedlake (far left), with United Space Alliance at Johnson Space Center, and a KSC worker (behind Newman) who is operating the movable work platform or bucket. The STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT), familiarizing themselves with the orbiter's midbody and crew compartments. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. After the mating, Ross and Newman are scheduled to perform three spacewalks to connect power, data and utility lines and install exterior equipment. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya; PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability
-
ERIC Educational Resources Information Center
Kennedy, Mike
2005-01-01
How much does a school cost? It's a straightforward question, but the answer for many education administrators is a frustrating, "It depends." The cost of a school facility surely includes what an education institution pays for the building site, design plans, construction materials, workers who assemble the building, and furniture and equipment…
-
Shuttle Boosters stacked in the VAB
2007-01-04
Workers continue stacking the twin solid rocket boosters in highbay 1 inside Kennedy Space Center's Vehicle Assembly Building. The solid rocket boosters are being prepared for NASA's next Space Shuttle launch, mission STS-117. The mission is scheduled to launch aboard Atlantis no earlier than March 16, 2007.
-
Carbohydrate active enzymes revealed in Coptotermes formosanus transcriptome
USDA-ARS?s Scientific Manuscript database
A normalized cDNA library of Coptotermes formosanus was constructed using mixed RNA isolated from workers, soldiers, nymphs and alates of both sexes. Sequencing of this library generated 131,637 EST and 25,939 unigenes were assembled. Carbohydrate active enzymes (CAZymes) revealed in this library we...
-
Assembly of cucumber (Cucumis sativus L.) somaclones
NASA Astrophysics Data System (ADS)
Skarzyńska, Agnieszka; Kuśmirek, Wiktor; Pawełkowicz, Magdalena; PlÄ der, Wojciech; Nowak, Robert M.
2017-08-01
The development of next generation sequencing opens the possibility of using sequencing in various plant studies, such as finding structural changes and small polymorphisms between species and within them. Most analyzes rely on genomic sequences and it is crucial to use well-assembled genomes of high quality and completeness. Herein we compare commonly available programs for genomic assembling and newly developed software - dnaasm. Assemblies were tested on cucumber (Cucumis sativus L.) lines obtained by in vitro regeneration (somaclones), showing different phenotypes. Obtained results shows that dnaasm assembler is a good tool for short read assembly, which allows obtaining genomes of high quality and completeness.
-
A Proximity-Based Programmable DNA Nanoscale Assembly Line
Gu, Hongzhou; Chao, Jie; Xiao, Shou-Jun; Seeman, Nadrian C.
2010-01-01
Our ability to synthesize nanometer-scale particles with desired shapes and compositions offers the exciting prospect of generating new functional materials and devices by combining the particles in a controlled fashion into larger structures. Self-assembly can achieve this task efficiently, but may be subject to thermodynamic and kinetic limitations: Reactants, intermediates and products may collide with each other throughout the assembly timecourse to produce non-target instead of target species. An alternative approach to nanoscale assembly uses information-containing molecules such as DNA1 to control interactions and thereby minimize unwanted crosstalk between different components. In principle, this method should allow the stepwise and programmed construction of target products by fastening individually selected nanoscale components – much as an automobile is built on an assembly line. Here, we demonstrate that a nanoscale assembly line can indeed be realized by the judicious combination of three known DNA-based modules: a DNA origami2 tile that provides a framework and track for the assembly process, cassettes containing three distinct two-state DNA machines that serve as programmable cargo-donating devices3,4 and are attached4,5 in series to the tile, and a DNA walker that can move on the track from device to device and collect cargo. As the walker traverses the pathway prescribed by the origami tile track, it encounters sequentially the three DNA devices that can be independently switched between an ‘ON’ state allowing its cargo to be transferred to the walker, and an ‘OFF’ state where no transfer occurs. We use three different types of gold nanoparticles as cargo and show that the experimental system does indeed allow the controlled fabrication of the eight different products that can be obtained with three two-state devices. PMID:20463734
-
The health consequences of maquiladora work: women on the US-Mexican border.
Guendelman, S; Silberg, M J
1993-01-01
OBJECTIVES. As more US companies take jobs to Mexico, complaints are growing that the assembly plants (maquiladoras) exert adverse effects on workers' health. This study assessed the health of female electronic and garment maquiladora workers, comparing them with women employed in services and non-wage earners. METHODS. A survey was administered to 480 women living in Tijuana in 1990. The sample was stratified by occupation and length of employment. Functional impediments, nervousness, depression, and sense of control were used as outcome variables, controlling for other confounders. RESULTS. Despite working longer hours, receiving lower wages, and having less decision latitude and education, maquiladora workers were not worse off than service workers. Maquiladora workers reported similar incidences of depression and lack of control over life. Electronics workers, especially, had lower incidences of nervousness and functional impediments, after controlling for other confounders. Also, maquiladora work did not add an extra health burden compared with non-wage earners. CONCLUSIONS. The adverse effects of maquiladoras previously reported may have been exaggerated. Subjective factors, including negative attitudes toward economic adversity and work dissatisfaction, were stronger predictors of health than were objective indicators. PMID:8417604
-
Al Mamun, Mahfuz; Parvin, Kausar; Yu, Marat; Wan, Jessica; Willan, Samantha; Gibbs, Andrew; Jewkes, Rachel; Naved, Ruchira Tabassum
2018-04-18
Women in Bangladesh experience high rates of Intimate Partner Violence (IPV). IPV is more prevalent against income earning women compared to their non-earning counterparts, and Workplace Violence (WPV) is also common. Such violence is a violation of women's rights, and also constrains them from contributing to their personal growth, household, community and the economy at large. There is limited evidence on what works to prevent IPV and WPV amongst garment workers. This paper describes an evaluation of HERrespect, an intervention which aims to reduce IPV and WPV against female garment workers in and around Dhaka, Bangladesh. The trial employs a quasi-experimental design, with four intervention and four control factories. In the intervention factories a randomly selected cohort of married female line workers, a cohort of male line workers, and all middle management staff received the intervention. The intervention strategies involved (1) gender transformative group-based training for workers and management staff; (2) joint session between workers (15 female and male) and middle-management staff; (3) factory-wide activities; (4) awareness raising among top management; (5) factory policy review and development and 6) a community based campaign. For the evaluation, a cohort of randomly selected female workers and a cohort of selected management staff have been established. All workers (n = 800) and management staff (n = 395) from these cohorts were interviewed at baseline using two different questionnaires, and will be interviewed in the endline, 24 months post-baseline. Intention to treat analysis will be used for assessing the impact of HERrespect, comparing the intervention and control factories. To our knowledge this is the first study that seeks to evaluate the impact on IPV and WPV, of group sessions with female workers, male workers, and management; factory-wide campaigns and a community intervention among female garment workers in Bangladesh. Apart from informing programmers and policy makers about intervention effectiveness in reducing IPV and WPV against female garment workers this study will also present evidence on an intervention tailored to the situation in the garment sector, which makes HERrespect scalable. ClinicalTrials.gov NCT03304015, retrospectively registered on October 06, 2017.
-
Legal considerations in worker fitness evaluations.
Rothstein, M A
1988-01-01
Physicians performing worker fitness evaluations need to walk a very fine line. On the one hand, if they too-aggressively disqualify individuals, their actions may be illegal under handicap or other discrimination laws. On the other hand, if they are too lenient, the result may be injury or illness to the worker or even risks to public safety. Physicians must realize the unique nature of this type of medical examination and the close connection between law and medicine in this area.
-
2000-05-31
Grey Literature Network Service ( Farace , Dominic,1997) as, “that which is produced on all levels of government, academics, business and industry in... literature is available, on-line, to scientific workers throughout the world, for a world scientific database.” These reports served as the base to begin...all the world’s formal scientific literature is available, on-line, to scientific workers throughout the world, for a world scientific database
-
Measurements by a Vector Network Analyzer at 325 to 508 GHz
NASA Technical Reports Server (NTRS)
Fung, King Man; Samoska, Lorene; Chattopadhyay, Goutam; Gaier, Todd; Kangaslahti, Pekka; Pukala, David; Lau, Yuenie; Oleson, Charles; Denning, Anthony
2008-01-01
Recent experiments were performed in which return loss and insertion loss of waveguide test assemblies in the frequency range from 325 to 508 GHz were measured by use of a swept-frequency two-port vector network analyzer (VNA) test set. The experiments were part of a continuing effort to develop means of characterizing passive and active electronic components and systems operating at ever increasing frequencies. The waveguide test assemblies comprised WR-2.2 end sections collinear with WR-3.3 middle sections. The test set, assembled from commercially available components, included a 50-GHz VNA scattering- parameter test set and external signal synthesizers, augmented with recently developed frequency extenders, and further augmented with attenuators and amplifiers as needed to adjust radiofrequency and intermediate-frequency power levels between the aforementioned components. The tests included line-reflect-line calibration procedures, using WR-2.2 waveguide shims as the "line" standards and waveguide flange short circuits as the "reflect" standards. Calibrated dynamic ranges somewhat greater than about 20 dB for return loss and 35 dB for insertion loss were achieved. The measurement data of the test assemblies were found to substantially agree with results of computational simulations.
-
Redesigning assembly stations using ergonomic methods as a lean tool.
Eswaramoorthi, M; John, Mervyn; Rajagopal, C Arjun; Prasad, P S S; Mohanram, P V
2010-01-01
With the current state of the global economy, demand for various products plummeting. To sustain in the market, companies have to reduce cost and improve quality. Today, companies have started implementing new philosophies like TQM, TPM, six sigma and lean manufacturing techniques to remain competitive in the market. Lean manufacturing is an emerging philosophy which continuously strives to reduce waste. The main objective of analyzing the assembly line with a lean perspective is to identify the areas related to human interface with other systems that could lead to the generation of waste. Improper workplace design leads to unreasonable mental or physical burden and results in waste generation like slow work (delay and inventory), and defects, which is named as muri waste. An attempt has been made in this paper to locate muri waste and create a "Lean assembly line". The proposed method, based on the use of Rapid Upper Limb Assessment (RULA) with CATIA V5 platform, has allowed the measurement of a large set of operator posture parameters and assessment of ergonomic stresses. Based on the results, the process stations in the assembly line were redesigned to prevent the generation of waste.
-
Occupational Contact Dermatitis in the Canadian Aircraft Industry.
Loranger, Camille; Moreau, Linda; Sasseville, Denis
Aircraft building exposes workers to irritant and sensitizing products. The aim of this article was to study occupational dermatoses among aircraft workers over 25 years. The files of aerospace workers referred between 1990 and 2015 were extracted from the database of the McGill University Health Centre contact dermatitis clinic. These were subdivided according to demographics, type of work, patch testing results, and final diagnosis. Of 305 workers, 58% were 40 years or younger; one third were women. Onset of dermatitis varied from 2 months to 25 years, but 120 cases (39%) occurred during the first 3 years. Fifty-one percent of the cases involved assemblers, and 27% were composite material technicians, which were overrepresented as they constitute 10% of the workforce. Of the 305 workers, 152 suffered from allergic contact dermatitis, and 96 had irritant contact dermatitis. Of those with allergic contact dermatitis, 124 reacted to epoxy-based workplace products, but only 48 had positive patch tests to commercially available epoxy allergens. More than 60% of the cases of epoxy allergy would have been missed without testing with workplace products.
-
Occupational Contact Dermatitis in the Canadian Aircraft Industry: A 25-Year Retrospective Study.
Loranger, Camille; Moreau, Linda; Sasseville, Denis
2018-03-24
Aircraft building exposes workers to irritant and sensitizing products. The aim of this article was to study occupational dermatoses among aircraft workers over 25 years. The files of aerospace workers referred between 1990 and 2015 were extracted from the database of the McGill University Health Centre contact dermatitis clinic. These were subdivided according to demographics, type of work, patch testing results, and final diagnosis. Of 305 workers, 58% were 40 years or younger; one third were women. Onset of dermatitis varied from 2 months to 25 years, but 120 cases (39%) occurred during the first 3 years. Fifty-one percent of the cases involved assemblers, and 27% were composite material technicians, which were overrepresented as they constitute 10% of the workforce. Of the 305 workers, 152 suffered from allergic contact dermatitis, and 96 had irritant contact dermatitis. Of those with allergic contact dermatitis, 124 reacted to epoxy-based workplace products, but only 48 had positive patch tests to commercially available epoxy allergens. More than 60% of the cases of epoxy allergy would have been missed without testing with workplace products.
-
Prism-assembly for dual-band short-wave infrared region line-scan camera
NASA Astrophysics Data System (ADS)
Chassagne, Bruno; de Laulanié, Lucie; Pommiès, Matthieu
2018-02-01
A simple dichroic splitter for dual-band line scanning is described. It comprises prisms elements that enable cheapness of the whole prototype by using only one linear detector. Validity of the design is demonstrated via in-line moisture measurement.
-
2001-01-17
Workers in the Payload Changeout Room check the Payload Ground Handling Mechanism that will move the U.S. Lab Destiny out of Atlantis’ payload bay and into the PCR. After the move, Atlantis will roll back to the Vehicle Assembly Building to allow workers to conduct inspections, continuity checks and X-ray analysis on the 36 solid rocket booster cables located inside each booster’s system tunnel. An extensive evaluation of NASA’s SRB cable inventory revealed conductor damage in four (of about 200) cables on the shelf. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis
-
NASA Astrophysics Data System (ADS)
Azmi, N. I. L. Mohd; Ahmad, R.; Zainuddin, Z. M.
2017-09-01
This research explores the Mixed-Model Two-Sided Assembly Line (MMTSAL). There are two interrelated problems in MMTSAL which are line balancing and model sequencing. In previous studies, many researchers considered these problems separately and only few studied them simultaneously for one-sided line. However in this study, these two problems are solved simultaneously to obtain more efficient solution. The Mixed Integer Linear Programming (MILP) model with objectives of minimizing total utility work and idle time is generated by considering variable launching interval and assignment restriction constraint. The problem is analysed using small-size test cases to validate the integrated model. Throughout this paper, numerical experiment was conducted by using General Algebraic Modelling System (GAMS) with the solver CPLEX. Experimental results indicate that integrating the problems of model sequencing and line balancing help to minimise the proposed objectives function.
-
Multicriteria Analysis of Assembling Buildings from Steel Frame Structures
NASA Astrophysics Data System (ADS)
Miniotaite, Ruta
2017-10-01
Steel frame structures are often used in the construction of public and industrial buildings. They are used for: all types of slope roofs; walls of newly-built public and industrial buildings; load bearing structures; roofs of renovated buildings. The process of assembling buildings from steel frame structures should be analysed as an integrated process influenced by such factors as construction materials and machinery used, the qualification level of construction workers, complexity of work, available finance. It is necessary to find a rational technological design solution for assembling buildings from steel frame structures by conducting a multiple criteria analysis. The analysis provides a possibility to evaluate the engineering considerations and find unequivocal solutions. The rational alternative of a complex process of assembling buildings from steel frame structures was found through multiple criteria analysis and multiple criteria evaluation. In multiple criteria evaluation of technological solutions for assembling buildings from steel frame structures by pairwise comparison method the criteria by significance are distributed as follows: durability is the most important criterion in the evaluation of alternatives; the price (EUR/unit of measurement) of a part of assembly process; construction workers’ qualification level (category); mechanization level of a part of assembling process (%), and complexity of assembling work (in points) are less important criteria.
-
Protective clothing for workers with 5-kW and 20-kW short-arc lamps
NASA Technical Reports Server (NTRS)
Argoud, M. J.
1969-01-01
Two suits of protective clothing reduce hazards to personnel working near short-arc lamps. One suit is worn during assembly or servicing of inoperative 5- and 20-kw lamps. The other suit is worn during adjustment or focusing of operating 5-kw lamps.
-
How a School Coped with the Oklahoma City Bombing.
ERIC Educational Resources Information Center
Aspy, David N.; Aspy, Cheryl B.
1996-01-01
Following the Oklahoma City bombing, fifth graders at a nearby elementary school coped with ensuing uncertainty, pain, and loss. They wrote appreciative letters to fire and rescue workers; shared personal stories with classmates; compiled an anthology of poems, prayers, and stories; attended an assembly to honor parents participating in rescue…
-
TOWN AND COUNTRY BUSINESS PROGRAM. (TITLE SUPPLIED).
ERIC Educational Resources Information Center
LEYENDECKER, P.J.
THESE 14 PAMPHLETS CONSTITUTE AN EXTENSION SERVICE PROGRAM OUTLINE FOR TEACHING A BUSINESS PROGRAM APPLICABLE TO RURAL YOUTH. THE CONTENTS INCLUDE BOTH A LEADER'S GUIDE AND AN EXTENSION WORKER'S GUIDE. THE REMAINDER OF THE PROGRAM DELVES INTO MARKETING, WHOLESALING, SALES AND SERVICES, STANDARDS AND GRADES OF PRODUCE, ASSEMBLY AND STORAGE,…
-
Maquiladoras, Women's Work, and Unemployment in Northern Mexico.
ERIC Educational Resources Information Center
Tiano, Susan
1984-01-01
Uses Marxist/feminist concepts to explain employment patterns among female workers in multinational maquiladoras (assembly plants) in northern Mexico. Concludes that maquiladoras have not alleviated regional unemployment for either sex, but have created a docile low-wage work force that includes a pool of surplus labor. Contains 48 references. (SV)
-
The Minnesota Defense Industry Conversion Project. A Partnership for Retraining.
ERIC Educational Resources Information Center
Daines, James R.; And Others
The Minnesota Defense Conversion Adjustment Project was initiated in 1993 with funding provided through the U.S. Department of Labor's Defense Conversion Adjustment Program to help workers at a Minnesota defense plant make the transition from assembler and related production classifications to machinists and other positions requiring specific job…
-
(Re/Dis)assembling Learning Practices Online with Fluid Objects and Spaces
ERIC Educational Resources Information Center
Thompson, Terrie Lynn
2012-01-01
Actor network theory (ANT) is used to explore how work-learning is enacted in informal online communities and illustrates how researchers might use sociomaterial approaches to uncover complexities, uncertainties, and specificities of work-learning practices. Participants in this study were self-employed workers. The relational and material aspects…
-
2001-06-18
KENNEDY SPACE CENTER, Fla. -- In KSC’s Spacecraft Assembly and Encapsulation Facility -2, workers adjust the canister as it is lowered over the Microwave Anisotropy Probe (MAP). The spacecraft will be transported to Launch Complex 17, Cape Canaveral Air Force Station. Launch of MAP via a Boeing Delta II rocket is scheduled for June 30
-
1967-01-01
Workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, install the last engine on the S-IB stage. Developed by the Marshall Space Flight Center (MSFC) and built by the Chrysler Corporation at MAF, the S-IB stage utilized eight H-1 engines to produce a combined thrust of 1,600,000 pounds.
-
There Was No Ford Plant in Their Future.
ERIC Educational Resources Information Center
McMahon, John J.
1981-01-01
Describes "Operation What Now," a project initiated by Orange County Community College (OCCC) in Middleton, NY, in response to the closing of the community's Ford Motor Company assembly plant. Explains the steps taken by OCCC to assist the unemployed workers: organizing public meetings, strengthening communication, and providing career counseling.…
-
The Japanese Automobile Worker: A Microcosm of Japan's Success.
ERIC Educational Resources Information Center
Kaderabeck, Elizabeth A.
A teaching unit on the Japanese automobile worker was developed from a compilation of on-site interviews with Japanese company managers and production line employees, and official publications of the Japanese car industry. The unit is designed to present a balanced picture of Japan's economic success and labor relations and to develop global…
-
2000-11-10
KENNEDY SPACE CENTER, FLA. -- Workers in the Space Station Processing Facility line up on the sides of the payload transport canister as an overhead crane moves the P6 integrated truss segment into position above it. After being placed in the canister, the truss will be transported to Launch Pad 39B and the payload changeout room. Then it will be moved into Space Shuttle Endeavour’s payload bay for mission STS-97. The P6 comprises Solar Array Wing-3 and the Integrated Electronic Assembly, to be installed on the Space Station. The Station’s electrical power system will use eight photovoltaic solar arrays, each 112 feet long by 39 feet wide, to convert sunlight to electricity. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station. The STS-97 launch is scheduled Nov. 30 at 10:06 p.m. EST
-
2000-11-10
KENNEDY SPACE CENTER, FLA. -- Workers in the Space Station Processing Facility line up on the sides of the payload transport canister as an overhead crane moves the P6 integrated truss segment into position above it. After being placed in the canister, the truss will be transported to Launch Pad 39B and the payload changeout room. Then it will be moved into Space Shuttle Endeavour’s payload bay for mission STS-97. The P6 comprises Solar Array Wing-3 and the Integrated Electronic Assembly, to be installed on the Space Station. The Station’s electrical power system will use eight photovoltaic solar arrays, each 112 feet long by 39 feet wide, to convert sunlight to electricity. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station. The STS-97 launch is scheduled Nov. 30 at 10:06 p.m. EST
-
2004-07-14
KENNEDY SPACE CENTER, FLA. - At Vandenberg Air Force Base in California, Orbital Sciences workers remove the canister from the DART (Demonstration for Autonomous Rendezvous Technology) flight demonstrator, a spacecraft developed to prove technologies for locating and maneuvering near an orbiting satellite. Future applications of technologies developed by the DART project will benefit the nation in future space-vehicle systems development requiring in-space assembly, services or other autonomous rendezvous operations. Designed and developed for NASA by Orbital Sciences Corporation in Dulles, Va., the DART spacecraft will be launched on a Pegasus launch vehicle. At about 40,000 feet over the Pacific Ocean, the Pegasus will be released from Orbital’s Stargazer L-1011 aircraft, fire its rocket motors and boost DART into a polar orbit approximately 472 miles by 479 miles. Once in orbit, DART will rendezvous with a target satellite, the Multiple Paths, Beyond-Line-of-Site Communications satellite, also built by Orbital Sciences. DART will then perform several close proximity operations, such as moving toward and away from the satellite using navigation data provided by onboard sensors. DART is scheduled for launch no earlier than Oct. 18.
-
Dental laboratory technology education in China: current situation and challenges.
Zheng, Liwei; Yue, Li; Zhou, Min; Yu, Haiyang
2013-03-01
Modern dentistry and dental education in China were first introduced from abroad by Dr. Lindsay in 1907. However, advancements in the field of dental laboratory technology did not occur to the same degree in specialties such as prosthodontics and orthodontics. Since the 1990s, orders from abroad demanding dental appliances surged as the image of China as the "world's factory" strengthened. The assembly line model, in which technicians work like simple procedure workers, was rapidly applied to denture production, while the traditional education system and apprenticeship systems demonstrated little progress in these years. The lack of advancement in dental laboratory technology education caused insufficient development in China's dental technology industry. In order to alter the situation, a four-year dental laboratory technology undergraduate educational program was established in 2005 by West China School of Stomatology, Sichuan University (WCSS, SCU). This program was based on SCU's undergraduate education and WCSS's junior college education systems. The program introduced scientific methods in relevant subjects into laboratory technicians' training and made many improvements in the availability of trained faculty, textbooks, laboratory facilities, and curriculum.
-
9. Photograph of a line drawing. SHEET 9, LONGITUDINAL SECTION ...
9. Photograph of a line drawing. SHEET 9, LONGITUDINAL SECTION ON LINE AA; 9-16-1940. Assembly Building for Tank Plant for the Chrysler Corporation, Macomb County, Michigan. Delineator: E.B. - Detroit Arsenal, 6501 East Eleven Mile Road, Warren, Macomb County, MI
-
Method and apparatus for assembling permanent magnet rotors
Hsu, J.S.; Adams, D.J.
1999-06-22
A permanent magnet assembly for assembly in large permanent magnet motors and generators includes a two-piece carrier that can be slid into a slot in the rotor and then secured in place using a set screw. The invention also provides an auxiliary carrier device with guide rails that line up with the teeth of the rotor, so that a permanent magnet assembly can be pushed first into a slot, and then down the slot to its proper location. An auxiliary tool is provided to move the permanent magnet assembly into position in the slot before it is secured in place. Methods of assembling and disassembling the magnet assemblies in the rotor are also disclosed. 2 figs.
-
Manufacturing work and organizational stresses in export processing zones.
Lu, Jinky Leilanie
2009-10-01
In the light of global industrialization, much attention has been focused on occupational factors and their influence on the health and welfare of workers. This was a cross sectional study using stratified sampling technique based on industry sizes. The study sampled 24 industries, 6 were small scale industries and 9 each for medium and large scale industries. From the 24 industries, a total of 500 respondents for the questionnaire was taken. For occupational health and safety standards that industries have to comply with, there was low compliance among small-scale industries relative to the medium and large scale industries. Only one industry had an air cleaning device for cleaning contaminated air prior to emission into the external community. Among the 500 respondents, majority were female (88.8%), single (69.6%) and worked in the production or assembly-line station (87.4%). Sickness absenteeism was relative high among the workers in this study accounting for almost 54% among females and 48% among males. Many of the workers also reported of poor performance at work, boredom, tardiness and absenteeism. For association between work factors and personal factors, the following were found to be statistically significant at p=0.05. Boredom was associated with lack of skills training, lack of promotion, disincentives for sick leaves, poor relationship with boss and poor relationships with employers. On the other hand, poor performance was also associated with lack of skills training, lack of promotions, job insecurity, and poor relationship with employers. From the data generated, important issues that must be dealt with in work organizations include the quality of work life, and health and safety issues. Based on these findings, we can conclude that there are still issues on occupational health and safety (OHS) in the target site of export processing zones in the Philippines. There must be an active campaign for OHS in industries that are produce for the global market such as the target industries in this study.
-
NASA Astrophysics Data System (ADS)
Li, Zixiang; Janardhanan, Mukund Nilakantan; Tang, Qiuhua; Nielsen, Peter
2018-05-01
This article presents the first method to simultaneously balance and sequence robotic mixed-model assembly lines (RMALB/S), which involves three sub-problems: task assignment, model sequencing and robot allocation. A new mixed-integer programming model is developed to minimize makespan and, using CPLEX solver, small-size problems are solved for optimality. Two metaheuristics, the restarted simulated annealing algorithm and co-evolutionary algorithm, are developed and improved to address this NP-hard problem. The restarted simulated annealing method replaces the current temperature with a new temperature to restart the search process. The co-evolutionary method uses a restart mechanism to generate a new population by modifying several vectors simultaneously. The proposed algorithms are tested on a set of benchmark problems and compared with five other high-performing metaheuristics. The proposed algorithms outperform their original editions and the benchmarked methods. The proposed algorithms are able to solve the balancing and sequencing problem of a robotic mixed-model assembly line effectively and efficiently.
-
NASA Astrophysics Data System (ADS)
Yamauchi, Makoto; Iwamoto, Kazuyo
2010-05-01
Line heating is a skilled task in shipbuilding to shape the outer plates of ship hulls. Real-time information on the deformation of the plates during the task would be helpful to workers performing this process. Therefore, we herein propose an interactive scheme for supporting workers performing line heating; the system provides such information through an optical shape measurement instrument combined with an augmented reality (AR) system. The instrument was designed and fabricated so that the measured data were represented using coordinates based on fiducial markers. Since the markers were simultaneously used in the AR system for the purpose of positioning, the data could then be displayed to the workers through a head-mounted display as a virtual image overlaid on the plates. Feedback of the shape measurement results was thus performed in real time using the proposed system.
-
Optimal manpower allocation in aircraft line maintenance (Case in GMF AeroAsia)
NASA Astrophysics Data System (ADS)
Puteri, V. E.; Yuniaristanto, Hisjam, M.
2017-11-01
This paper presents a mathematical modeling to find the optimal manpower allocation in an aircraft line maintenance. This research focuses on assigning the number and type of manpower that allocated to each service. This study considers the licenced worker or Aircraft Maintenance Engineer Licence (AMEL) and non licenced worker or Aircraft Maintenance Technician (AMT). In this paper, we also consider the relationship of each station in terms of the possibility to transfer the manpower among them. The optimization model considers the number of manpowers needed for each service and the requirement of AMEL worker. This paper aims to determine the optimal manpower allocation using the mathematical modeling. The objective function of the model is to find the minimum employee expenses. The model was solved using the ILOG CPLEX software. The results show that the manpower allocation can meet the manpower need and the all load can be served.
-
Ramirez-Gonzalez, Ricardo; Caccamo, Mario; MacLean, Daniel
2011-10-01
Scientists now use high-throughput sequencing technologies and short-read assembly methods to create draft genome assemblies in just days. Tools and pipelines like the assembler, and the workflow management environments make it easy for a non-specialist to implement complicated pipelines to produce genome assemblies and annotations very quickly. Such accessibility results in a proliferation of assemblies and associated files, often for many organisms. These assemblies get used as a working reference by lots of different workers, from a bioinformatician doing gene prediction or a bench scientist designing primers for PCR. Here we describe Gee Fu, a database tool for genomic assembly and feature data, including next-generation sequence alignments. Gee Fu is an instance of a Ruby-On-Rails web application on a feature database that provides web and console interfaces for input, visualization of feature data via AnnoJ, access to data through a web-service interface, an API for direct data access by Ruby scripts and access to feature data stored in BAM files. Gee Fu provides a platform for storing and sharing different versions of an assembly and associated features that can be accessed and updated by bench biologists and bioinformaticians in ways that are easy and useful for each. http://tinyurl.com/geefu dan.maclean@tsl.ac.uk.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fureigh, M.L.
In a new surface mount assembly area at AlliedSignal Inc., Kansas City Division (KCD), a tinning/trimming robot system tins and trims the gold-plated leads of surface mount technology (SMT) transistors. The KCD-designed system uses a Unimation PUMA 260 robot, a General Production Devices SP-2000 solder pot; water-soluble Blackstone No. 2508 flux; and a Virtual Industries high-temperature, ESD-conductive, miniature suction cup. After the manual cleaning operation, the processed SMT transistors go to the QUADSTAR Automated Component Placement System for a Radar Logic Assembly. The benefits are reductions in the cost of nonconformance, worker fatigue, and standard hours.
-
2010-04-04
Contrails are seen as workers leave the Launch Control Center after the launch of the space shuttle Discovery and the start of the STS-131 mission at NASA Kennedy Space Center in Cape Canaveral, Fla. on Monday April 5, 2010. Discovery is carrying a multi-purpose logistics module filled with science racks for the laboratories aboard the station. The mission has three planned spacewalks, with work to include replacing an ammonia tank assembly, retrieving a Japanese experiment from the station’s exterior, and switching out a rate gyro assembly on the station’s truss structure. Photo Credit: (NASA/Bill Ingalls)
-
Silva, Kláudia M M N; Coelho, Bernardo G P; Junior, Josemir V S; Faria, Luiz F M; Dutra, Ludmila; Alvarenga, Marília; Roggini, Renan; Echternach, Eliza Helena de Oliveira
2012-01-01
Data from 2006 indicated that Brazilian footwear leather industry was composed of approximately 9,488 formally registered establishments, considering the leather industry, footwear and leather goods. It was responsible for 211,582 people employed. However, in spite of having many employees, this kind of organization found several problems when analyzed from the ergonomics view. With this premise, then, in order to identify bottlenecks and other engineering problems that could cause discomfort and motivation lack among workers, leading directly to the loss of the product quality, the assembly sector of women's shoes factory was characterized.
-
2009-03-21
CAPE CANAVERAL, Fla. – On the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, a worker removes a cover from the EXPRESS Logistics Carrier for the STS-129 mission. The truck and carrier arrived on the C-17 cargo plane in the background. The carrier is part of the payload on space shuttle Atlantis, which will deliver to the International Space Station components including two spare gyroscopes, two nitrogen tank assemblies, two pump modules, an ammonia tank assembly and a spare latching end effector for the station's robotic arm. STS-129 is targeted to launch Nov. 12. Photo credit: NASA/Tim Jacobs
-
Talapin, Dmitri V
2008-06-01
Two papers in this issue report important developments in the field of inorganic nanomaterials. Chen and O'Brien discuss self-assembly of semiconductor nanocrystals into binary nanoparticle superlattices (BNSLs). They show that simple geometrical principles based on maximizing the packing density can determine BNSL symmetry in the absence of cohesive electrostatic interactions. This finding highlights the role of entropy as the driving force for ordering nanoparticles. The other paper, by Weller and co-workers, addresses an important problem related to device integration of nanoparticle assemblies. They employ the Langmuir-Blodgett technique to prepare long-range ordered monolayers of close-packed nanocrystals and transfer them to different substrates.
-
Implementation of an ergonomics program for the welding department inside a car assembly company.
Francisco, Caceres; Edwin, Troya
2012-01-01
The premise for this project is to implement an ergonomics program for the welding department of a car assembly company, considering that this area represents the highest occupational risk in relation to musculoskeletal injuries. The project also allows the demonstration of the different implementation processes of an ergonomics program; it also permits the determination of individual risks faced by workers of the welding department, and finally gives a chance of improving common injuries using the sentinel system. The main challenge is to reduce musculoskeletal injuries and absenteeism among welders through actions implemented by the ergonomics program.
-
Design of electromagnetic bearing for vibration control of flexible transmission shaft
NASA Technical Reports Server (NTRS)
Gondhalekar, V.; Holmes, R.
1984-01-01
Recently magnetic bearings were proposed by several researchers and shown to be viable on a variety of rotor assemblies. The design and construction of such a bearing, which employs features hitherto not used by other workers is examined. These include an original approach to the design of the electromagnets and their amplifiers, and to software in a digital control system, to condition the control signals so as to make the magnets appear to be linear and uncoupled. The resulting system is used to control a rotor-bearing assembly, whose speed range covers two flexural-critical speeds.
-
Rapid cloning of genes in hexaploid wheat using cultivar-specific long-range chromosome assembly.
Thind, Anupriya Kaur; Wicker, Thomas; Šimková, Hana; Fossati, Dario; Moullet, Odile; Brabant, Cécile; Vrána, Jan; Doležel, Jaroslav; Krattinger, Simon G
2017-08-01
Cereal crops such as wheat and maize have large repeat-rich genomes that make cloning of individual genes challenging. Moreover, gene order and gene sequences often differ substantially between cultivars of the same crop species. A major bottleneck for gene cloning in cereals is the generation of high-quality sequence information from a cultivar of interest. In order to accelerate gene cloning from any cropping line, we report 'targeted chromosome-based cloning via long-range assembly' (TACCA). TACCA combines lossless genome-complexity reduction via chromosome flow sorting with Chicago long-range linkage to assemble complex genomes. We applied TACCA to produce a high-quality (N50 of 9.76 Mb) de novo chromosome assembly of the wheat line CH Campala Lr22a in only 4 months. Using this assembly we cloned the broad-spectrum Lr22a leaf-rust resistance gene, using molecular marker information and ethyl methanesulfonate (EMS) mutants, and found that Lr22a encodes an intracellular immune receptor homologous to the Arabidopsis thaliana RPM1 protein.
-
Reference Manual on Interference Seals and Connectors for Undersea Electrical Applications
1976-07-01
processes. It has a standard line of metal shell connectors, the ER and EB series, which are available with braided and laced harnass work and breakouts, and...Assemblies (RM) 4-10 4.3.2 Molded Plastic Assemblies (PM) 4-11 4.3.3 Metal Shell Assemblies (MS) 4-12 4.3.4 Pressure-balanced Oil-filled Assemblies...connectors according to material composition. The classes of connectors include: Rubber Molded (RM), Plastic Molded (PM), Metal Shell (MS), Pressure-Balanced
-
Proposal for a remotely manned space station
NASA Technical Reports Server (NTRS)
Minsky, Marvin
1990-01-01
The United States is in trouble in space. The costs of the proposed Space Station Freedom have grown beyond reach, and the present design is obsolete. The trouble has come from imagining that there are only two alternatives: manned vs. unmanned. Both choices have led us into designs that do not appear to be practical. On one side, the United States simply does not possess the robotic technology needed to operate or assemble a sophisticated unmanned space station. On the other side, the manned designs that are now under way seem far too costly and dangerous, with all of its thousands of extravehicular activity (EVA) hours. More would be accomplished at far less cost by proceeding in a different way. The design of a space station made of modular, Erector Set-like parts is proposed which is to be assembled using earth-based remotely-controlled binary-tree telerobots. Earth-based workers could be trained to build the station in space using simulators. A small preassembled spacecraft would be launched with a few telerobots, and then, telerobots could be ferried into orbit along with stocks of additional parts. Trained terrestrial workers would remotely assemble a larger station, and materials for additional power and life support systems could be launched. Finally, human scientists and explorers could be sent to the space station. Other aspects of such a space station program are discussed.
-
Misbehaviors of Front-Line Research Personnel and the Integrity of Community-Based Research
True, Gala; Alexander, Leslie B.; Richman, Kenneth A.
2012-01-01
There has been little empirical research into misconduct and misbehavior among community research workers who recruit and collect data in vulnerable and marginalized health populations and are also members of those same communities. We conducted qualitative interviews with community research workers and traditional research assistants to understand the context and consequences of misbehaviors that pose a threat to research ethics and data integrity. In our sample, more community research workers acknowledged engaging in research wrongdoing than did traditional research assistants. These behaviors were most prevalent among community research workers who were not well-integrated into the research team. We suggest best practices for investigators to promote an environment that supports research integrity in research projects that employ community research workers. PMID:21680972
-
The MITLL-AFRL IWSLT 2016 Systems
2016-12-08
Processing for MT We preprocessed the Arabic- English dataset from the QED corpus to correct sentence alignment errors and run-together words. These...are often split across lines, sometimes leaving the matching English and Arabic words on different lines. We used line-final punctua- tion as a guide...to assemble English lines into full sentences, while simultaneously concatenating their Arabic counterparts. Some Arabic files contain lines with just
-
Edimansyah, BA; Rusli, BN; Naing, L
2008-01-01
To examine the effects of short duration stress management training (SMT) on self-perceived depression, anxiety and stress in male automotive assembly workers, 118 male automotive workers from Pekan, Pahang (n = 60, mean age = 40.0 years, SD = 6.67) and Kota Bharu, Kelantan (n = 58, mean age = 38.1 years, SD = 5.86) were assigned to experimental and control group, respectively. A SMT program consisting of aerobic exercise, stress management manual, video session, lecture, question and answer session, and pamphlet and poster session were conducted in the experimental group. A validated short-form Malay version of the Depression Anxiety Stress Scales (DASS-21) were self-administered before and after the intervention program in the experimental and control group and their time and group interaction effects were examined using the repeated measure ANOVA test. Results indicated that the mean (SD) scores for DASS-Depression (p = 0.036) and DASS-Anxiety (p = 0.011) were significantly decreased, respectively, after the intervention program in the experimental group as compared to the control group (significant time-group interaction effects). No similar effect was observed for the mean (SD) scores for DASS-Stress (p = 0.104). However, the mean (SD) scores for subscales of DASS-Depression (Dysphoria, p = 0.01), DASS-Anxiety (Subjective Anxiety, p = 0.007, Situational Anxiety, p = 0.048), and DASS-Stress (Nervous Arousal, p = 0.018, Easily Upset, p = 0.047) showed significant time and group interaction effects. These findings suggest that short duration SMT is effective in reducing some aspects of self-perceived depression, anxiety and stress in male automotive workers. PMID:19021918
-
Leslie, Trent; Baucom, Regina S.
2014-01-01
Human-mediated selection can lead to rapid evolution in very short time scales, and the evolution of herbicide resistance in agricultural weeds is an excellent example of this phenomenon. The common morning glory, Ipomoea purpurea, is resistant to the herbicide glyphosate, but genetic investigations of this trait have been hampered by the lack of genomic resources for this species. Here, we present the annotated transcriptome of the common morning glory, Ipomoea purpurea, along with an examination of whole genome expression profiling to assess potential gene expression differences between three artificially selected herbicide resistant lines and three susceptible lines. The assembled Ipomoea transcriptome reported in this work contains 65,459 assembled transcripts, ~28,000 of which were functionally annotated by assignment to Gene Ontology categories. Our RNA-seq survey using this reference transcriptome identified 19 differentially expressed genes associated with resistance—one of which, a cytochrome P450, belongs to a large plant family of genes involved in xenobiotic detoxification. The differentially expressed genes also broadly implicated receptor-like kinases, which were down-regulated in the resistant lines, and other growth and defense genes, which were up-regulated in resistant lines. Interestingly, the target of glyphosate—EPSP synthase—was not overexpressed in the resistant Ipomoea lines as in other glyphosate resistant weeds. Overall, this work identifies potential candidate resistance loci for future investigations and dramatically increases genomic resources for this species. The assembled transcriptome presented herein will also provide a valuable resource to the Ipomoea community, as well as to those interested in utilizing the close relationship between the Convolvulaceae and the Solanaceae for phylogenetic and comparative genomics examinations. PMID:25155274
-
Leslie, Trent; Baucom, Regina S
2014-08-25
Human-mediated selection can lead to rapid evolution in very short time scales, and the evolution of herbicide resistance in agricultural weeds is an excellent example of this phenomenon. The common morning glory, Ipomoea purpurea, is resistant to the herbicide glyphosate, but genetic investigations of this trait have been hampered by the lack of genomic resources for this species. Here, we present the annotated transcriptome of the common morning glory, Ipomoea purpurea, along with an examination of whole genome expression profiling to assess potential gene expression differences between three artificially selected herbicide resistant lines and three susceptible lines. The assembled Ipomoea transcriptome reported in this work contains 65,459 assembled transcripts, ~28,000 of which were functionally annotated by assignment to Gene Ontology categories. Our RNA-seq survey using this reference transcriptome identified 19 differentially expressed genes associated with resistance-one of which, a cytochrome P450, belongs to a large plant family of genes involved in xenobiotic detoxification. The differentially expressed genes also broadly implicated receptor-like kinases, which were down-regulated in the resistant lines, and other growth and defense genes, which were up-regulated in resistant lines. Interestingly, the target of glyphosate-EPSP synthase-was not overexpressed in the resistant Ipomoea lines as in other glyphosate resistant weeds. Overall, this work identifies potential candidate resistance loci for future investigations and dramatically increases genomic resources for this species. The assembled transcriptome presented herein will also provide a valuable resource to the Ipomoea community, as well as to those interested in utilizing the close relationship between the Convolvulaceae and the Solanaceae for phylogenetic and comparative genomics examinations. Copyright © 2014 Leslie and Baucom.
-
NASA Astrophysics Data System (ADS)
van den Dool, T. C.; Kamphues, F.; Gielesen, W.; Dorrepaal, M.; Doelman, N.; Loix, N.; Verschueren, J. P.; Kooijman, P. P.; Visser, M.; Velsink, G.; Fleury, K.
2005-08-01
TNO, in cooperation with Micromega-Dynamics, SRON, Dutch Space and CSL, has developed a compact breadboard cryogenic Optical Delay Line for use in future space interferometry missions. The work is performed under ESA contract in preparation for the DARWIN mission. The breadboard delay line is representative of a future flight mechanism, with all used materials and processes being flight representative. The delay line has a single stage voice coil actuator for Optical Path Difference (OPD) control, driving a two-mirror cat's eye. Magnetic bearings are used for guiding. They provide frictionless and wear free operation with zero-hysteresis. The manufacturing, assembly and acceptance testing have been completed and are reported in this paper. The verification program, including functional testing at 40 K, will start in the final quarter of 2005.
-
Li, Li; Xiong, De-fu; Liu, Jia-wen; Li, Zi-xin; Zeng, Guang-cheng; Li, Hua-liang
2014-03-01
We aimed to evaluate the interference of 50 Hz extremely low frequency electromagnetic field (ELF-EMF) occupational exposure on the neurobehavior tests of workers performing tour-inspection close to transformers and distribution power lines. Occupational short-term "spot" measurements were carried out. 310 inspection workers and 300 logistics staff were selected as exposure and control. The neurobehavior tests were performed through computer-based neurobehavior evaluation system, including mental arithmetic, curve coincide, simple visual reaction time, visual retention, auditory digit span and pursuit aiming. In 500 kV areas electric field intensity at 71.98% of total measured 590 spots were above 5 kV/m (national occupational standard), while in 220 kV areas electric field intensity at 15.69% of total 701 spots were above 5 kV/m. Magnetic field flux density at all the spots was below 1,000 μT (ICNIRP occupational standard). The neurobehavior score changes showed no statistical significance. Results of neurobehavior tests among different age, seniority groups showed no significant changes. Neurobehavior changes caused by daily repeated ELF-EMF exposure were not observed in the current study.
-
2000-01-01
Disease Name thumbs pain at the base of the thumbs twisting and gripping butchers , house- keepers, packers, seam- stresses, cutters fingers De...Quervain’s disease difficulty moving finger; snapping and jerking movements repeatedly using the index fingers meatpackers, poultry workers, carpenters...line workers rotator cuff tendinitis hands, wrists pain, swelling repetitive or forceful hand and wrist motions core making, poultry process- ing
-
On-Line, Off-Campus but in the Flow: Learning from Peers in Development Studies
ERIC Educational Resources Information Center
Beckmann, Elizabeth A.; Kilby, Patrick
2008-01-01
Development workers studying at the graduate level benefit from exposure to the great variety of cultures and worldviews. In the Australian National University's Master of Applied Anthropology and Participatory Development (MAAPD) program, peer learning is giving current and future development workers in the field and in the classroom the chance…
-
DETAIL VIEW ON THE MAIN ASSEMBLY LEVEL OF ELEVATOR SHOWING ...
DETAIL VIEW ON THE MAIN ASSEMBLY LEVEL OF ELEVATOR SHOWING THE DOUBLED COLUMN FOR THE BUILDING EXPANSION JOINT AT COLUMN LINE AA-18. - Offutt Air Force Base, Glenn L. Martin-Nebraska Bomber Plant, Building D, Peacekeeper Drive, Bellevue, Sarpy County, NE
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-20
..., LLC, Subsidiary of Mag Industrial Automation Systems, Machesney Park, IL; Notice of Negative... automation equipment and machine tools did not contribute to worker separations at the subject facility and...' firm's declining customers. The survey revealed no imports of automation equipment and machine tools by...
-
Migrant Labor Problems in the 1970's. Staff Report to the Colorado General Assembly.
ERIC Educational Resources Information Center
Colorado State General Assembly, Denver. Legislative Council.
Updating the findings reported in Colorado Legislative Publication No. 72, "Migratory Labor in Colorado," published in December of 1962, this 1970 staff report describes existing economic conditions of both growers and seasonal farm workers, governmental and private services available to the migrants, and some of the major migrant issues…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-12
... shipped to an affiliated plant where they are used in the assembly of automotive vehicles. New information... Detroit, Michigan location of Chrysler, LLC, Detroit Axle Plant. The Department has determined that these... Knight Facilities Management LLC working on-site at the Detroit, Michigan location of Chrysler, LLC...
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-16
... reconsideration of the negative determination applicable to the subject firm. The denial was based on the finding... assembly and packaging of accessories. The Department's notice of negative determination was issued on... in the group threatened with total or partial separation from employment on date of certification...
-
Assembling a solid staff. Job rotation, job shaping and cross-training help employee retention.
Redling, Robert
2003-03-01
Qualified workers for medical practices are in short supply, and you want to keep the good staff you have. Here are strategies to match employees with the right positions, ease workplace stress, heighten morale and ensure coverage of duties when you're down a position or two.
-
2004-01-29
KENNEDY SPACE CENTER, FLA. - Workers install a 20-foot by 15-foot replica of the STS-107 logo above the “A” on the A tower in the transfer aisle of the Vehicle Assembly Building. The debris from the orbiter Columbia, lost in a tragic accident on its return to Earth from the STS-107 mission, is permanently stored in the tower. A dedication ceremony Jan. 29, 2004, revealed a plaque being installed in the storage area in honor of “Columbia, the crew of STS-107, and their loved ones.”
-
1997-01-16
KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility install a solid state recorder into a transport assembly in its protective enclosure as part of the prelaunch preparations for STS-82, the second Hubble Space Telescope servicing mission. The digital solid state recorder will replace one of three engineering/science tape recorders on Hubble. The solid state recorder has no moving parts to wear out. It also is more flexible than a reel-to-reel recorder and can store 10 times as much data. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.
-
Blacklock, C; Ward, A M; Heneghan, C; Thompson, M
2014-01-01
The migration of healthcare workers from Africa depletes countries already suffering from substantial staffing shortages and considerable disease burdens. The recruitment of such individuals by high income countries has been condemned by the World Health Organisation. However, understanding the reasons why healthcare workers migrate is essential, in order to attempt to alter migration decisions. We aimed to systematically analyse factors influencing healthcare workers' decisions to migrate from Africa. We systematically searched CINAHL (1980-Nov 2010), Embase (1980-Nov 2010), Global Health (1973-Nov 2010) and Medline (1950-Nov 2010) for qualitative studies of healthcare workers from Africa which specifically explored views about migration. Two reviewers identified articles, extracted data and assessed quality of included studies. Meta-ethnography was used to synthesise new lines of understanding and meaning from the data. The search identified 1203 articles from which we included six studies of healthcare workers trained in seven African countries, namely doctors or medical students (two studies), nurses (three), and pharmacy students (one study). Using meta-ethnographic synthesis we produced six lines of argument relating to the migration decisions of healthcare workers: 1) Struggle to realise unmet material expectations of self, family and society, 2) Strain and emotion, interpersonal discord, and insecurity in workplace, 3) Fear from threats to personal or family safety, in and out of workplace, 4) Absence of adequate professional support and development, 5) Desire for professional prestige and respect, 6) Conviction that hopes and goals for the future will be fulfilled overseas. We conclude that a complex interaction of factors contribute to the migration decisions of healthcare workers from Africa. Some of the factors identified are more amenable to change than others, and addressing these may significantly affect migration decisions of African healthcare workers in the future. Copyright © 2013 Elsevier Ltd. All rights reserved.
-
Illness Absences Among Beryllium Sensitized Workers
Watkins, Janice P.; Ellis, Elizabeth D.; Girardi, David J.; Cragle, Donna L.
2014-01-01
Objectives. This study examined absence rates among US Department of Energy workers who had beryllium sensitization (BeS) or were diagnosed with chronic beryllium disease (CBD) compared with those of other workers. Methods. We used the lymphocyte proliferation test to determine beryllium sensitivity. In addition, we applied multivariable logistic regression to compare absences from 2002 to 2011 between workers with BeS or CBD to those without, and survival analysis to compare time to first absence by beryllium sensitization status. Finally, we examined beryllium status by occupational group. Results. Fewer than 3% of the 19 305 workers were BeS, and workers with BeS or CBD had more total absences (odds ratio [OR] = 1.31; 95% confidence interval [CI] = 1.18, 1.46) and respiratory absences (OR = 1.51; 95% CI = 1.24, 1.84) than did other workers. Time to first absence for all causes and for respiratory conditions occurred earlier for workers with BeS or CBD than for other workers. Line operators and crafts personnel were at increased risk for BeS or CBD. Conclusions. Although not considered “diseased,” workers with BeS have higher absenteeism compared with nonsensitized workers. PMID:25211750
-
2003-09-02
KENNEDY SPACE CENTER, FLA. - Containers in the Columbia Debris Hangar are lined up after being emptied of the Columbia debris. The debris is being transferred to storage in the Vehicle Assembly Building. About 83,000 pieces were shipped to KSC during search and recovery efforts in East Texas.
-
WDR26 in Advanced Breast Cancer: A Novel Regulator of the P13K/AKT Pathway
2016-10-01
661, that disrupt the assembly of assembly of a specific signaling complex consisting of G, PI3K and AKT2, and blocked GPCR-stimulated PI3K/AKT...AKT2 with a higher efficacy than AKT1, and WDR26 also directly binds PI3K (Fig. 2). Second, we generated stable MDA-MB231 cell lines expressing...promotes Gβf signaling. Here, we demonstrate that WDR26 is overexpressed in highly malignant breast tumor cell lines and human breast cancer samples, and
-
Comprehensive evaluation of garment assembly line with simulation
NASA Astrophysics Data System (ADS)
Xu, Y.; Thomassey, S.; Chen, Y.; Zeng, X.
2017-10-01
In this paper, a comprehensive evaluation system is established to assess the garment production performance. It is based on performance indicators and supported with the corresponding results obtained by manual calculation or computer simulation. The assembly lines of a typical men’s shirt are taken as the study objects. With the comprehensive evaluation results, garments production arrangement scenarios are better analysed and then the appropriate one is supposed to be put into actual production. This will be a guidance given to companies on quick decision-making and multi-objective optimization of garment production.
-
STS-98 U.S. Lab Destiny is moved out of Atlantis' payload bay
NASA Technical Reports Server (NTRS)
2001-01-01
KENNEDY SPACE CENTER, Fla. -- Workers in the Payload Changeout Room check the U.S. Lab Destiny as its moves from Atlantis''' payload bay into the PCR. Destiny will remain in the PCR while Atlantis rolls back to the Vehicle Assembly Building to allow workers to conduct inspections, continuity checks and X-ray analysis on the 36 solid rocket booster cables located inside each booster'''s system tunnel. An extensive evaluation of NASA'''s SRB cable inventory revealed conductor damage in four (of about 200) cables on the shelf. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis.
-
Characteristics of a Power Line Used as a VLF Antenna.
1982-05-01
were glass melamine . Assemblies of 12 layers were fabricated at El Segundo, CA and shipped by air to Tromso, Norway for final assembly of the full 120...sciences, applied electronics, semiconductor crystal and device physics, radiometric Imaging; millimeter-wave and microwave technology. Information
-
ERIC Educational Resources Information Center
Weitz, Rebecca; Guild, Todd
1985-01-01
Describes how Hughes Aircraft trainers followed four steps in meeting the challenges of a flexible manufacturing environment: needs assessment, design strategy, pilot evaluation, and follow-through. Within this environment, 50 self-paced training products were developed for one of the company's wire and back plane harness assembly departments. (CT)
-
Do, Hongdo; Molania, Ramyar
2017-01-01
The identification of genomic rearrangements with high sensitivity and specificity using massively parallel sequencing remains a major challenge, particularly in precision medicine and cancer research. Here, we describe a new method for detecting rearrangements, GRIDSS (Genome Rearrangement IDentification Software Suite). GRIDSS is a multithreaded structural variant (SV) caller that performs efficient genome-wide break-end assembly prior to variant calling using a novel positional de Bruijn graph-based assembler. By combining assembly, split read, and read pair evidence using a probabilistic scoring, GRIDSS achieves high sensitivity and specificity on simulated, cell line, and patient tumor data, recently winning SV subchallenge #5 of the ICGC-TCGA DREAM8.5 Somatic Mutation Calling Challenge. On human cell line data, GRIDSS halves the false discovery rate compared to other recent methods while matching or exceeding their sensitivity. GRIDSS identifies nontemplate sequence insertions, microhomologies, and large imperfect homologies, estimates a quality score for each breakpoint, stratifies calls into high or low confidence, and supports multisample analysis. PMID:29097403
-
Interactive debug program for evaluation and modification of assembly-language software
NASA Technical Reports Server (NTRS)
Arpasi, D. J.
1979-01-01
An assembly-language debug program written for the Honeywell HDC-601 and DDP-516/316 computers is described. Names and relative addressing to improve operator-machine interaction are used. Features include versatile display, on-line assembly, and improved program execution and analysis. The program is discussed from both a programmer's and an operator's standpoint. Functional diagrams are included to describe the program, and each command is illustrated.
-
The assembly and use of continuous flow systems for chemical synthesis.
Britton, Joshua; Jamison, Timothy F
2017-11-01
The adoption of and opportunities in continuous flow synthesis ('flow chemistry') have increased significantly over the past several years. Continuous flow systems provide improved reaction safety and accelerated reaction kinetics, and have synthesised several active pharmaceutical ingredients in automated reconfigurable systems. Although continuous flow platforms are commercially available, systems constructed 'in-lab' provide researchers with a flexible, versatile, and cost-effective alternative. Herein, we describe the assembly and use of a modular continuous flow apparatus from readily available and affordable parts in as little as 30 min. Once assembled, the synthesis of a sulfonamide by reacting 4-chlorobenzenesulfonyl chloride with dibenzylamine in a single reactor coil with an in-line quench is presented. This example reaction offers the opportunity to learn several important skills including reactor construction, charging of a back-pressure regulator, assembly of stainless-steel syringes, assembly of a continuous flow system with multiple junctions, and yield determination. From our extensive experience of single-step and multistep continuous flow synthesis, we also describe solutions to commonly encountered technical problems such as precipitation of solids ('clogging') and reactor failure. Following this protocol, a nonspecialist can assemble a continuous flow system from reactor coils, syringes, pumps, in-line liquid-liquid separators, drying columns, back-pressure regulators, static mixers, and packed-bed reactors.
-
1968-01-01
Only simple equipment, simple technology and low initial capital investment are needed in their manufacture. The condoms can be made by people who were previously unskilled or only semi-skilled workers. Plastic condoms differ from those made of latex rubber in that the nature of the plastic film allows unlimited shelf-life. Also, the plastic has a higher degree of lubricity than latex rubber; if there is a demand for extra lubrication in a particular market, this can be provided. Because the plastic is inert, these condoms need not be packaged in hermetically sealed containers. All these attributes make it possible to put these condoms on the distributors' shelves in developing countries competitively with rubber condoms. The shape of the plastic condom is based on that of the lamb caecum, which has long been used as luxury-type condom. The plastic condom is made from plastic film (ethylene ethyl acrilate) of 0.001 inch (0.0254 mm.) thickness. In addition, a rubber ring is provided and sealed into the base of the condom for retention during coitus. The advantage of the plastic condom design and the equipment on which it is made is that production can be carried out either in labour-intensive economy or with varying degrees of mechanization and automation. The uniform, finished condom if made using previously untrained workers. Training of workers can be done in a matter of hours on the two machines which are needed to produce and test the condoms. The plastic film is provided on a double wound roll, and condom blanks are prepared by means of a heat-sealing die on the stamping machine. The rubber rings are united to the condom blanks on an assembly machine, which consists of a mandrel and heat-sealing equipment to seal the rubber ring to the base of the condom. Built into the assembly machine is a simple air-testing apparatus that can detect the smallest pinhole flaw in a condom. The manufacturing process is completed by unravelling the condom from the assembly mandrel. The condom is then ready for packaging, either on automatic equipment or manually into small envelopes of highly polished paper. Although their present design is based on a heat-sealed blank, it may be possible shortly to manufacture plastic condoms on the same principle as rubber ones. A dipping process would be used, but with less sophisticated technology and with higher outputs per increment of capital investment. The present equipment used to make plastic condoms cost about 3,000 for one stamping machine and 22 assembly and testing machines. On a three shift per day, 300-day working year, it is possible, with experienced workers, to make 100,000 gross of plastic condoms for each manufacturing unit annually. As the technology is refined, the output should improve significantly.
-
Evaluation of Hose in Hose transfer line service life
DOE Office of Scientific and Technical Information (OSTI.GOV)
EAGLE, O.H.
This document presents a determination for the amount of expected service life from Hose-in-Hose Transfer Lines based on vendor information and past HIHTL experience. Based on the information presented in this report and referenced documentation, we conclude the service life of the inner hose establishes the limits of service life for the finished assemblies. Since the process and environmental conditions to which the transfer line is subjected will not adversely affect the hose, the effective service life is that stated by the vendor--three years from the date of initial transfer. Transfer line assemblies have a shelf life of seven yearsmore » from the date of hose manufacture, if stored in accordance with Section 2.1. This evaluation provides documentation showing that a three year service life has been justified. In the event that transfer lines are to be operated after three years from the date of initial transfer and within the shelf life of seven years, they must be reevaluated for their ability to perform intended functions.« less
-
Sanders, Sara; Bullock, Karen; Broussard, Crystal
2012-01-01
Hospice social workers and members of the interdisciplinary team develop close therapeutic relationships with patients and families as they journey toward death. During this process, situations can develop that challenge professional boundaries and blur the line between a professional and personal relationship. This article will examine professional boundaries within the context of hospice care through case studies identifying challenges that hospice social workers and members of the interdisciplinary team may encounter with recommendations for how to manage boundary concerns.
-
Magnetically attached sputter targets
Makowiecki, D.M.; McKernan, M.A.
1994-02-15
An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.
-
Magnetically attached sputter targets
Makowiecki, Daniel M.; McKernan, Mark A.
1994-01-01
An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly.
-
Human Caring in the Social Work Context: Continued Development and Validation of a Complex Measure
ERIC Educational Resources Information Center
Ellis, Jacquelyn I.; Ellett, Alberta J.; DeWeaver, Kevin
2007-01-01
Objectives: (a) to continue the development of a measure of human caring in the context of social work practice and (b) to expand a line of inquiry exploring the relationship between human caring characteristics and the retention of public child welfare workers. Methodology: Surveys were received from a sample (n = 786) child welfare workers in…
-
ERIC Educational Resources Information Center
Raines, James C.
2008-01-01
In 2007, the Midwest School Social Work Council celebrated its fortieth anniversary in Cleveland, Ohio. This article reviews early efforts to build alliances of school social workers across state lines, the early collaborative relationship with the National Association of Social Workers, and the eventual need for a new organization. The Midwest…
-
1981-09-28
based on the production level of a nonhandi- capped worker. The new jobs are expressed in staff-years of work for handicapped workers. For fiscal years...34nonhandicapped". Page 5-6. Lines 5 thru 8. Delete the sentence beginninq "Thus, if a workshop ..." and insert the following " The new jobs are
-
OUTLINE FOR OCCUPATIONAL HOME ECONOMICS COURSE IN COMMERCIAL AND INSTITUTIONAL FOOD PREPARATION.
ERIC Educational Resources Information Center
Alabama State Dept. of Education, Montgomery. Home Economics Service.
THE EXPERIMENTAL OUTLINE IS FOR TEACHER USE IN PLANNING A TWO-SEMESTER COURSE TO PREPARE 11TH AND 12TH GRADE STUDENTS FOR ENTRY LEVEL COMMERCIAL FOOD PREPARATION JOBS SUCH AS FOOD SERVICE WORKERS, COOK HELPERS, CATERER HELPERS, SALAD MAKERS, BAKER HELPERS, SHORT ORDER COOKS, AND TRAY LINE WORKERS. IT WAS DEVELOPED BY VOCATIONAL HOME ECONOMICS…
-
Flow chemistry: A light touch to a deadly problem
NASA Astrophysics Data System (ADS)
Booker-Milburn, Kevin
2012-06-01
Flow chemistry has grown in stature as a technique with the potential to deliver synthetic complexity with assembly-line-like efficiency. Application of flow technology to the front-line antimalarial drug artemisinin promises to revolutionalize treatment.
-
[Critical incidents and quality of life among rescue workers].
Prati, G; Pietrantoni, L
2009-01-01
Fire-fighters, paramedics and civil protection volunteers routinely confront potentially traumatic events in the course of their jobs. The frequency of exposure to critical incidents and the relationship between critical incident exposure and quality of life (Professional Quality of Life Scale, PROQOL, Stamm, 2005) A sample of 586 Italian emergency workers. The data indicated that the most frequent critical incidents were incidents involving multiple casualties (65% three or more times), prolonged extrication of trapped victim with life-threatening injuries (64% three or more times), verbal or physical threat by public while on duty (41% three or more times), and victims known to fire-emergency worker (40% three or more times). Infrequent events included serious line of duty injury to self (76% never) and colleagues and line of duty risk of injury or death to self (53% never) and colleagues (47% never). Emergency health workers were more exposed to critical incidents in comparison to fire-fighters. Result from non-parametric correlation analyses indicated that the more infrequent events showed the strong association with compassion fatigue and burnout while failed mission after extensive effort was the event most strongly associated with most associated with compassion satisfaction.
-
The devil is in the details: Transposable element analysis of the Tasmanian devil genome.
Nilsson, Maria A
2016-01-01
The third marsupial genome was sequenced from the Tasmanian devil ( Sarcophilus harrisii ), a species that currently is driven to extinction by a rare transmissible cancer. The transposable element (TE) landscape of the Tasmanian devil genome revealed that the main driver of retrotransposition the L ong IN terspersed E lement 1 (LINE1) seem to have become inactivated during the past 12 million years. Strangely, the S hort IN terspersed E lements (SINE), that normally hijacks the LINE1 retrotransposition system, became inactive prior to LINE1 at around 30 million years ago. The SINE inactivation was in vitro verified in several species. Here I discuss that the apparent LINE1 inactivation might be caused by a genome assembly artifact. The repetitive fraction of any genome is highly complex to assemble and the observed problems are not unique to the Tasmanian devil genome.
-
The devil is in the details: Transposable element analysis of the Tasmanian devil genome
Nilsson, Maria A.
2016-01-01
ABSTRACT The third marsupial genome was sequenced from the Tasmanian devil (Sarcophilus harrisii), a species that currently is driven to extinction by a rare transmissible cancer. The transposable element (TE) landscape of the Tasmanian devil genome revealed that the main driver of retrotransposition the Long INterspersed Element 1 (LINE1) seem to have become inactivated during the past 12 million years. Strangely, the Short INterspersed Elements (SINE), that normally hijacks the LINE1 retrotransposition system, became inactive prior to LINE1 at around 30 million years ago. The SINE inactivation was in vitro verified in several species. Here I discuss that the apparent LINE1 inactivation might be caused by a genome assembly artifact. The repetitive fraction of any genome is highly complex to assemble and the observed problems are not unique to the Tasmanian devil genome. PMID:27066301
-
Automation of assembly of electrical products
NASA Astrophysics Data System (ADS)
Lebedenko, V. A.
1984-10-01
Approaches to the operation of a production line with a free rather than rigid tempo and cycles are discussed, along with the installation of a interoperational transport with trays rather than a continuously moving convey belt and the use of standard technological equipment in lieu of small scale mechanization. The design of a production line which follow these principles is examined. The advantages as well as the disadvantages of such a system are considered in the development of an automated flexible production line with robotized technological complex. A single flexible assembly line for the hookup operations with the most important link, the automatic manipulator for joining the product components together, consists of modules classifiable into six groups: (1) movers of the base parts; (2) feeders and orientators of parts; (3) joiners of parts; (4) carriers and holders of parts; (5) inspection and control systems; and (6) fasteners of parts.
-
Two-Wire to Four-Wire Audio Converter
NASA Technical Reports Server (NTRS)
Talley, G. L., Jr; Seale, B. L.
1983-01-01
Simple circuit provides interface between normally incompatible voicecommunication lines. Circuit maintains 40 dB of isolation between input and output halves of four-wire line permitting two-wire line to be connected. Balancing potentiometer, Rg, adjusts gain of IC2 to null feed through from input to output. Adjustment is done on workbench just after assembly.
-
Detection of Prostate Cancer Progression by Serum DNA Integrity
2010-04-01
qRT) Alu and direct qRT LINE1 is being optimized. We will also continue to develop circulating DNA methylated GSTP1 assay to complement the DNA...developed the LINE1 assay, assembled the manuscript on uLINE1, and performed preliminary analysis of circulating DNA GSTP1 methylation. The goal is to
-
49 CFR 572.76 - Limbs assembly and test procedure.
Code of Federal Regulations, 2013 CFR
2013-10-01
.... (3) Align the test probe specified in § 572.77(a) with the longitudinal center line of the femur force gauge, so that at impact, the probe's longitudinal center line coincides with the sensor's longitudinal center line within ±2 degrees. (4) Impact the knee with the test probe moving horizontally and...
-
49 CFR 572.76 - Limbs assembly and test procedure.
Code of Federal Regulations, 2011 CFR
2011-10-01
.... (3) Align the test probe specified in § 572.77(a) with the longitudinal center line of the femur force gauge, so that at impact, the probe's longitudinal center line coincides with the sensor's longitudinal center line within ±2 degrees. (4) Impact the knee with the test probe moving horizontally and...
-
49 CFR 572.76 - Limbs assembly and test procedure.
Code of Federal Regulations, 2012 CFR
2012-10-01
.... (3) Align the test probe specified in § 572.77(a) with the longitudinal center line of the femur force gauge, so that at impact, the probe's longitudinal center line coincides with the sensor's longitudinal center line within ±2 degrees. (4) Impact the knee with the test probe moving horizontally and...
-
49 CFR 572.76 - Limbs assembly and test procedure.
Code of Federal Regulations, 2014 CFR
2014-10-01
.... (3) Align the test probe specified in § 572.77(a) with the longitudinal center line of the femur force gauge, so that at impact, the probe's longitudinal center line coincides with the sensor's longitudinal center line within ±2 degrees. (4) Impact the knee with the test probe moving horizontally and...
-
77 FR 2658 - Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-19
... high pressure fuel lines due to improper installation of an expandable pin on the lower cowl assembly... chafing of the high pressure fuel lines, which if not corrected, could cause fuel leakage in a fire zone... on a high pressure (HP) fuel line. The source of chafing was related to the improper installation of...
-
Harikumar, K. R.; McNab, Iain R.; Polanyi, John C.; Zabet-Khosousi, Amir; Hofer, Werner A.
2011-01-01
The fabrication of nano devices at surfaces makes conflicting demands of mobility for self-assembly (SA) and immobility for permanence. The solution proposed in earlier work from this laboratory involved pattern formation in physisorbed molecules by SA, followed by localized reaction to chemically imprint the pattern substantially unchanged, a procedure we termed molecular-scale imprinting (MSI). Here, as proof of generality we extended this procedure, previously applied to imprinting circles on Si(111)-7 × 7, to SA lines of 1-chloropentane (CP) on Si(100)-2 × 1. The physisorbed lines consisted of pairs of CP that grew perpendicular to the Si dimer rows, as shown by scanning tunneling microscopy and ab initio theory. Chemical reaction of these lines with the surface was triggered in separate experiments by three different modes of energization: heat, electrons, or light. In all cases the CP molecules underwent MSI with a Si atom beneath so that the physisorbed lines of CP pairs were imprinted as chemisorbed lines of Cl pairs. PMID:20798058
-
NASA Technical Reports Server (NTRS)
1999-01-01
Marshall Space Flight Center (MSFC) has developed a specially-designed nut, called the Quick-Connect Nut, for quick and easy assembly of components in the harsh environment of space, as in assembly of International Space Station. The design permits nuts to be installed simply by pushing them onto standard bolts, then giving a quick twist. To remove, they are unscrewed like conventional nuts. Possible applications include the mining industry for erecting support barriers, assembling underwater oil drilling platforms, fire-fighting equipment, scaffolding, assembly-line machinery, industrial cranes, and even changing lug nuts on race cars. The speed of assembly can make the difference between life and death in different aspects of life on Earth.
-
1999-10-12
Marshall Space Flight Center (MSFC) has developed a specially-designed nut, called the Quick-Connect Nut, for quick and easy assembly of components in the harsh environment of space, as in assembly of International Space Station. The design permits nuts to be installed simply by pushing them onto standard bolts, then giving a quick twist. To remove, they are unscrewed like conventional nuts. Possible applications include the mining industry for erecting support barriers, assembling underwater oil drilling platforms, fire-fighting equipment, scaffolding, assembly-line machinery, industrial cranes, and even changing lug nuts on race cars. The speed of assembly can make the difference between life and death in different aspects of life on Earth.
-
Method and apparatus for assembling permanent magnet rotors
Hsu, John S.; Adams, Donald J.
1999-01-01
A permanent magnet assembly (22) for assembly in large permanent magnet (PM) motors and generators includes a two-piece carrier (23, 24) that can be slid into a slot (13) in the rotor (10) and then secured in place using a set screw (37). The invention also provides an auxiliary carrier device (50) with guide rails (51) that line up with the teeth (12) of the rotor, so that a permanent magnet assembly (22) can be pushed first into a slot (13), and then down the slot (13) to its proper location. An auxiliary tool (50) is provided to move the permanent magnet assembly (22) into position in the slot (13) before it is secured in place. Methods of assembling and disassembling the magnet assemblies (22) in the rotor (10) are also disclosed.
-
The high pressure gas assembly is moved to the payload canister
NASA Technical Reports Server (NTRS)
2001-01-01
KENNEDY SPACE CENTER, Fla. -- With workers keeping a close watch, the overhead crane lowers the high pressure gas assembly -- two gaseous oxygen and two gaseous nitrogen storage tanks into the payload canister. The joint airlock module is already in the canister. The airlock and tanks are part of the payload on mission STS-104 and are being transferred to orbiter Atlantis'''s payload bay. The storage tanks will be attached to the airlock during two spacewalks. The storage tanks will support future spacewalk operations from the Station and augment the Service Module gas resupply system. STS-104 is scheduled for launch June 14 from Launch Pad 39B.
-
2010-01-05
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, workers accompany External Tank-135 as it is transported to the Vehicle Assembly Building in the background. The tank arrived in Florida on Dec. 26 aboard the Pegasus barge, towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. ET-135 will be used to launch space shuttle Discovery on the STS-131 mission to the International Space Station. Launch is targeted for March 18. For information on the components of the space shuttle and the STS-131 mission, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Jack Pfaller
-
2010-01-05
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, workers prepare to store External Tank-135, newly delivered to the transfer aisle of the Vehicle Assembly Building. The tank arrived in Florida on Dec. 26 aboard the Pegasus barge, towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. ET-135 will be used to launch space shuttle Discovery on the STS-131 mission to the International Space Station. Launch is targeted for March 18. For information on the components of the space shuttle and the STS-131 mission, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Jack Pfaller
-
2010-01-05
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, workers inspect External Tank-135, newly offloaded from the Pegasus barge docked in the turn basin near the Vehicle Assembly Building. Pegasus arrived in Florida on Dec. 26, towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. ET-135 will be used to launch space shuttle Discovery on the STS-131 mission to the International Space Station. Launch is targeted for March 18. For information on the components of the space shuttle and the STS-131 mission, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Jack Pfaller
-
2010-09-29
CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, workers check the hoist connections on External Fuel Tank-122 as it is lifted toward a test cell. ET-122, the Space Shuttle Program's last external fuel tank was delivered to Kennedy's Turn Basin from NASA’s Michoud Assembly Facility in New Orleans aboard the Pegasus Barge. After testing, ET-122 eventually will be attached to space shuttle Endeavour for the STS-134 mission to the International Space Station targeted to launch February, 2011. For more information visit: http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Dimitri Gerondidakis
-
2010-09-29
CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, workers secure wires from an overhead hoist to External Fuel Tank-122, for its lift into a test cell. ET-122, the Space Shuttle Program's last external fuel tank was delivered to Kennedy's Turn Basin from NASA’s Michoud Assembly Facility in New Orleans aboard the Pegasus Barge. After testing, ET-122 eventually will be attached to space shuttle Endeavour for the STS-134 mission to the International Space Station targeted to launch February, 2011. For more information visit: http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Dimitri Gerondidakis
-
2010-09-29
CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, workers monitor the progress of External Fuel Tank-122 as it is lifted toward a test cell. ET-122, the Space Shuttle Program's last external fuel tank was delivered to Kennedy's Turn Basin from NASA’s Michoud Assembly Facility in New Orleans aboard the Pegasus Barge. After testing, ET-122 eventually will be attached to space shuttle Endeavour for the STS-134 mission to the International Space Station targeted to launch February, 2011. For more information visit: http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Dimitri Gerondidakis
-
2010-09-29
CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, workers check the hoist connections on External Fuel Tank-122 as it is lifted toward a test cell. ET-122, the Space Shuttle Program's last external fuel tank was delivered to Kennedy's Turn Basin from NASA’s Michoud Assembly Facility in New Orleans aboard the Pegasus Barge. After testing, ET-122 eventually will be attached to space shuttle Endeavour for the STS-134 mission to the International Space Station targeted to launch February, 2011. For more information visit: http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Dimitri Gerondidakis
-
SeqLib: a C ++ API for rapid BAM manipulation, sequence alignment and sequence assembly
Wala, Jeremiah; Beroukhim, Rameen
2017-01-01
Abstract We present SeqLib, a C ++ API and command line tool that provides a rapid and user-friendly interface to BAM/SAM/CRAM files, global sequence alignment operations and sequence assembly. Four C libraries perform core operations in SeqLib: HTSlib for BAM access, BWA-MEM and BLAT for sequence alignment and Fermi for error correction and sequence assembly. Benchmarking indicates that SeqLib has lower CPU and memory requirements than leading C ++ sequence analysis APIs. We demonstrate an example of how minimal SeqLib code can extract, error-correct and assemble reads from a CRAM file and then align with BWA-MEM. SeqLib also provides additional capabilities, including chromosome-aware interval queries and read plotting. Command line tools are available for performing integrated error correction, micro-assemblies and alignment. Availability and Implementation: SeqLib is available on Linux and OSX for the C ++98 standard and later at github.com/walaj/SeqLib. SeqLib is released under the Apache2 license. Additional capabilities for BLAT alignment are available under the BLAT license. Contact: jwala@broadinstitue.org; rameen@broadinstitute.org PMID:28011768
-
SeqLib: a C ++ API for rapid BAM manipulation, sequence alignment and sequence assembly.
Wala, Jeremiah; Beroukhim, Rameen
2017-03-01
We present SeqLib, a C ++ API and command line tool that provides a rapid and user-friendly interface to BAM/SAM/CRAM files, global sequence alignment operations and sequence assembly. Four C libraries perform core operations in SeqLib: HTSlib for BAM access, BWA-MEM and BLAT for sequence alignment and Fermi for error correction and sequence assembly. Benchmarking indicates that SeqLib has lower CPU and memory requirements than leading C ++ sequence analysis APIs. We demonstrate an example of how minimal SeqLib code can extract, error-correct and assemble reads from a CRAM file and then align with BWA-MEM. SeqLib also provides additional capabilities, including chromosome-aware interval queries and read plotting. Command line tools are available for performing integrated error correction, micro-assemblies and alignment. SeqLib is available on Linux and OSX for the C ++98 standard and later at github.com/walaj/SeqLib. SeqLib is released under the Apache2 license. Additional capabilities for BLAT alignment are available under the BLAT license. jwala@broadinstitue.org ; rameen@broadinstitute.org. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com
-
Directed evolution can rapidly improve the activity of chimeric assembly-line enzymes
Fischbach, Michael A.; Lai, Jonathan R.; Roche, Eric D.; Walsh, Christopher T.; Liu, David R.
2007-01-01
Nonribosomal peptides (NRPs) are produced by NRP synthetase (NRPS) enzymes that function as molecular assembly lines. The modular architecture of NRPSs suggests that a domain responsible for activating a building block could be replaced with a domain from a foreign NRPS to create a chimeric assembly line that produces a new variant of a natural NRP. However, such chimeric NRPS modules are often heavily impaired, impeding efforts to create novel NRP variants by swapping domains from different modules or organisms. Here we show that impaired chimeric NRPSs can be functionally restored by directed evolution. Using rounds of mutagenesis coupled with in vivo screens for NRP production, we rapidly isolated variants of two different chimeric NRPSs with ≈10-fold improvements in enzyme activity and product yield, including one that produces new derivatives of the potent NRP/polyketide antibiotic andrimid. Because functional restoration in these examples required only modest library sizes (103 to 104 clones) and three or fewer rounds of screening, our approach may be widely applicable even for NRPSs from genetically challenging hosts. PMID:17620609
-
Theobald, Sally
2002-01-01
This paper explores workers' experiences and understandings of occupational health hazards in the electronics industries of northern Thailand. Women form the bulk of the lower-level workforce as operators responsible for assembling the parts that make up microchip components. Drawing data from 16 months of research in workers' dormitories, formal and informal interviews and questionnaire surveys, in this paper I explore how gender relations are central to the organization and experience of work in these industries. I identify "work process" health hazards resulting from the physical working environment, and "workplace" health hazards relating to the organizational and social pressures of the working environment. Musculoskeletal pain, eye strain, chemical exposure, stress, improper use of safety equipment and accidents all impact upon women workers' health. Additionally, risk behaviors such as amphetamine and alcohol use, and unprotected sex, are associated with the social context of factory work.
-
Shuttle Boosters stacked in the VAB
2007-01-04
Lighting inside Kennedy Space Center's Vehicle Assembly Building seems to bathe the highbay 1 area in a golden hue as workers continue stacking the twin solid rocket boosters. The solid rocket boosters are being prepared for NASA's next Space Shuttle launch, mission STS-117. The mission is scheduled to launch aboard Atlantis no earlier than March 16, 2007.
-
Nutrition in the Community: A Text for Public Health Workers.
ERIC Educational Resources Information Center
McLaren, Donald S., Ed.
This collection of essays was assembled to provide coverage of the subject of community nutrition--the whole of nutritional sciences applied to consumers as groups or individuals. The two main concerns are the food itself and the consumer (his physical, mental, and social well-being). It is pointed out that biochemists have analyzed food and…
-
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-29
...., Robinson Solutions, Logistics Management Services, Inc., Corrigan Company and Murphy Company, Fenton, MO... Plant, Fenton, Missouri. The notice was published in the Federal Register on May 2, 2008 (73 FR 24317... leased from Corrigan Company and Murphy Company were employed on-site at the Fenton, Missouri location of...
-
Effects of Metric Change on Workers’ Tools and Training.
1981-07-01
understanding of the metric system, and particularly a lack of fluency in converting customary measurements to metric measuremerts, may increase the...assembly, installing, and repairing occupations 84 Painting, plastering, waterproofing, cementing , and related occupations 85 Excavating, grading... cementing , and related occupations 85 Excavating, grading, paving, and related occupations 86 Construction occupations, n.e.c. 89 Structural work
-
Balancing Work and Family: A Citizens' Agenda for the '90s.
ERIC Educational Resources Information Center
Roosevelt Center for American Policy Studies, Washington, DC.
The 813 participants in the Roosevelt Center's May, 1989, regional citizen assemblies discussed trends affecting workers, employers, and families and laid the groundwork for a recommended national work and family policy. Part 1 of this report analyzes the results of a series of introductory exercises in which citizens were asked to register their…
-
9. VIEW TO SOUTH SHOWING ENTRANCES TO BUILDING AT NORTHEAST ...
9. VIEW TO SOUTH SHOWING ENTRANCES TO BUILDING AT NORTHEAST CORNER. DOORS TO LEFT WERE FOR INTERIOR RAILROAD SPUR. ROLL-UP GARAGE DOOR TO RIGHT HAS REPLACED ORIGINAL PEDESTRIAN DOORS WHERE HOURLY SHIP WORKERS REPORTED TO WORK. - Rosie the Riveter National Historical Park, Ford Assembly Plant, 1400 Harbour Way South, Richmond, Contra Costa County, CA
-
Steel erected at A-3 Test Stand
2008-10-24
Fabricated steel began arriving by truck Oct. 24 for construction of the A-3 Test Stand that will be used to test the engine for the nation's next generation of moon rockets. Within days workers from Lafayette Steel Erector Inc. began assembling the 16 steel stages needed on the foundation and footings poured in the previous year.
-
Steel erected at A-3 Test Stand
NASA Technical Reports Server (NTRS)
2008-01-01
Fabricated steel began arriving by truck Oct. 24 for construction of the A-3 Test Stand that will be used to test the engine for the nation's next generation of moon rockets. Within days workers from Lafayette Steel Erector Inc. began assembling the 16 steel stages needed on the foundation and footings poured in the previous year.
-
1960-01-01
Workers at the Michoud Assembly Facility near New Orleans, Louisiana install the H-1 engines into the S-IB stage, the Saturn IB launch vehicle's first stage. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at MAF, the 90,000-pound booster utilized eight H-1 engines to produce a combined thrust of 1,600,000 pounds.
-
Tumkosit, Prem; Kuryatov, Alexander; Luo, Jie; Lindstrom, Jon
2006-10-01
Nicotinic acetylcholine receptors (AChRs) containing alpha6 subunits are typically found at aminergic nerve endings where they play important roles in nicotine addiction and Parkinson's disease. alpha6* AChRs usually contain beta3 subunits. beta3 subunits are presumed to assemble only in the accessory subunit position within AChRs where they do not participate in forming acetylcholine binding sites. Assembly of subunits in the accessory position may be a critical final step in assembly of mature AChRs. Human alpha6 AChRs subtypes were permanently transfected into human tsA201 human embryonic kidney (HEK) cell lines. alpha6beta2beta3 and alpha6beta4beta3 cell lines were found to express much larger amounts of AChRs and were more sensitive to nicotine-induced increase in the amount of AChRs than were alpha6beta2 or alpha6beta4 cell lines. The increased sensitivity to nicotine-induced up-regulation was due not to a beta3-induced increase in affinity for nicotine but probably to a direct effect on assembly of AChR subunits. HEK cells express only a small amount of mature alpha6beta2 AChRs, but many of these subunits are on the cell surface. This contrasts with Xenopus laevis oocytes, which express a large amount of incorrectly assembled alpha6beta2 subunits that bind cholinergic ligands but form large amorphous intracellular aggregates. Monoclonal antibodies (mAbs) were made to the alpha6 and beta3 subunits to aid in the characterization of these AChRs. The alpha6 mAbs bind to epitopes C-terminal of the extracellular domain. These data demonstrate that both cell type and the accessory subunit beta3 can play important roles in alpha6* AChR expression, stability, and up-regulation by nicotine.
-
NASA Astrophysics Data System (ADS)
Sugarindra, Muchamad; Ragil Suryoputro, Muhammad; Tiya Novitasari, Adi
2017-06-01
Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker’s creeper, shredder worker, workers’ workshop, mechanical line worker, trolley cleaning workers and workers’ crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.
-
Bruised Poultry Tissue as a Possible Source of Staphylococcal Infection
Roskey, C. T.; Hamdy, M. K.
1972-01-01
Bacteriological analyses were made on 45 swab samples secured from hands of poultry workers on processing line, on 31 bruised and 15 normal poultry tissue samples, and on 15 swabs obtained from infected lacerations and exudates of abcesses on hands, arms, chest, and abdomen of poultry workers. A total of 170 Staphylococcus cultures were isolated from samples examined. These cultures were characterized morphologically and biochemically and then grouped into six distinct patterns. S. aureus was found in 86.6% of swab samples obtained from infected workers, in 40% of swabs from hands of workers who handle bruised birds, and in 38.7% of bruised tissues, and was absent from all samples obtained from hands of workers who do not handle bruised birds. All the coagulase-positive staphylococcal isolates were bacteriophage-typed, and the results showed that the same phage-type S. aureus was found in many poultry bruises and in infected lesions of poultry workers as well as on hands of workers who handle bruised birds. These results indicate that poultry bruises are a source of staphylococcal infection encountered among poultry workers. PMID:4553136
-
ERIC Educational Resources Information Center
Unks, Gerald
1979-01-01
The author draws an analogy between today's school system and an assembly line, deploring the notion that all children are taught the same thing at the same time, ending in humiliation, disgrace, and failure for some, and nonchallenging academic activities for others. (KC)
-
Genetics and Assembly Line Enzymology of Siderophore Biosynthesis in Bacteria
Crosa, Jorge H.; Walsh, Christopher T.
2002-01-01
The regulatory logic of siderophore biosynthetic genes in bacteria involves the universal repressor Fur, which acts together with iron as a negative regulator. However in other bacteria, in addition to the Fur-mediated mechanism of regulation, there is a concurrent positive regulation of iron transport and siderophore biosynthetic genes that occurs under conditions of iron deprivation. Despite these regulatory differences the mechanisms of siderophore biosynthesis follow the same fundamental enzymatic logic, which involves a series of elongating acyl-S-enzyme intermediates on multimodular protein assembly lines: nonribosomal peptide synthetases (NRPS). A substantial variety of siderophore structures are produced from similar NRPS assembly lines, and variation can come in the choice of the phenolic acid selected as the N-cap, the tailoring of amino acid residues during chain elongation, the mode of chain termination, and the nature of the capturing nucleophile of the siderophore acyl chain being released. Of course the specific parts that get assembled in a given bacterium may reflect a combination of the inventory of biosynthetic and tailoring gene clusters available. This modular assembly logic can account for all known siderophores. The ability to mix and match domains within modules and to swap modules themselves is likely to be an ongoing process in combinatorial biosynthesis. NRPS evolution will try out new combinations of chain initiation, elongation and tailoring, and termination steps, possibly by genetic exchange with other microorganisms and/or within the same bacterium, to create new variants of iron-chelating siderophores that can fit a particular niche for the producer bacterium. PMID:12040125
-
77 FR 67561 - Airworthiness Directives; Univair Aircraft Corporation Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-13
... airplanes. All references to Ercoupe Service Memorandum No. 20, Revision A, dated September 1, 2008, in the... Reference Ercoupe Service Bulletin No. 20 for the Aileron Balance Assembly Requirements,'' on line 2, change... ``Request to Reference Ercoupe Service Bulletin No. 20 for the Aileron Balance Assembly Requirements,'' on...
-
Parachute Recovery Systems Design Manual
1991-03-01
CUTTER BLADE ’S ACTUATOR ASSEMBLY ASSEMBL WELDED CLOSURE DISK LINE BORON/CALCIUM CHROMATE 1OHM BRIDGE -. (47gm Dia. Wire Tophet C) DAP RING POLVIMIDE...8.124 J. A. Buckley. "Missile Recovery System for High-Speed Small-Caliber Missiles." AIAA Paper, October 1986. (AIAA 86-2462.) 8.125 S. K. Ibrahim
-
40 CFR 63.4481 - Am I subject to this subpart?
Code of Federal Regulations, 2011 CFR
2011-07-01
... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...
-
40 CFR 63.4481 - Am I subject to this subpart?
Code of Federal Regulations, 2012 CFR
2012-07-01
... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...
-
40 CFR 63.4481 - Am I subject to this subpart?
Code of Federal Regulations, 2010 CFR
2010-07-01
... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...
-
40 CFR 63.4481 - Am I subject to this subpart?
Code of Federal Regulations, 2013 CFR
2013-07-01
... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...
-
40 CFR 63.4481 - Am I subject to this subpart?
Code of Federal Regulations, 2014 CFR
2014-07-01
... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...
-
Tunable and rapid self-assembly of block copolymers using mixed solvent vapors.
Park, Woon Ik; Tong, Sheng; Liu, Yuzi; Jung, Il Woong; Roelofs, Andreas; Hong, Seungbum
2014-12-21
Pattern generation of well-controlled block copolymers (BCPs) with a high Flory-Huggins interaction parameter (χ) is important for applications in sub-20 nm nanolithography. We used mixed solvents of dimethylformamide (DMF) and toluene to control the morphology as well as the time to achieve the targeted morphology via self-assembly of BCPs. By precisely controlling the volume ratio of DMF and toluene, well-ordered line, honeycomb, circular hole, and lamellar nanostructures were obtained from a cylinder-forming poly(styrene-b-2-vinylpyridine) (PS-b-P2VP) BCP with high χ. Furthermore, a well-aligned 12 nm line pattern was successfully achieved in the guiding template within one minute using the mixed solvents. This practical method may also be applicable to self-assembly of other BCPs, providing more opportunities for the next-generation sub-10 nm lithography applications.
-
Stepwise Synthesis of Giant Unilamellar Vesicles on a Microfluidic Assembly Line
2011-01-01
Among the molecular milieu of the cell, the membrane bilayer stands out as a complex and elusive synthetic target. We report a microfluidic assembly line that produces uniform cellular compartments from droplet, lipid, and oil/water interface starting materials. Droplets form in a lipid-containing oil flow and travel to a junction where the confluence of oil and extracellular aqueous media establishes a flow-patterned interface that is both stable and reproducible. A triangular post mediates phase transfer bilayer assembly by deflecting droplets from oil, through the interface, and into the extracellular aqueous phase to yield a continuous stream of unilamellar phospholipid vesicles with uniform and tunable size. The size of the droplet precursor dictates vesicle size, encapsulation of small-molecule cargo is highly efficient, and the single bilayer promotes functional insertion of a bacterial transmembrane pore. PMID:21309555
-
Guimarães, L B de M; Anzanello, M J; Renner, J S
2012-05-01
This paper presents a method for implementing multifunctional work teams in a footwear company that followed the Taylor/Ford system for decades. The suggested framework first applies a Learning Curve (LC) modeling to assess whether rotation between tasks of different complexities affects workers' learning rate and performance. Next, the Macroergonomic Work Analysis (MA) method (Guimarães, 1999, 2009) introduces multifunctional principles in work teams towards workers' training and resources improvement. When applied to a pilot line consisting of 100 workers, the intervention-reduced work related accidents in 80%, absenteeism in 45.65%, and eliminated work related musculoskeletal disorders (WMSD), medical consultations, and turnover. Further, the output rate of the multifunctional team increased average 3% compared to the production rate of the regular lines following the Taylor/Ford system (with the same shoe model being manufactured), while the rework and spoilage rates were reduced 85% and 69%, respectively. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.
-
The coping strategies of front-line health workers in the context of user fee exemptions in Niger
2015-01-01
When user fee exemptions were introduced for children under five years of age in Niger, front-line staff in the health system were not consulted in advance, and various obstacles seriously hindered the policy's implementation. Health workers developed two types of coping strategies. The first dealt with shortcomings of the policy implementation process related to management tools, drug stocks, co-existence of the fee exemption and cost recovery systems, and, above all, supply management for medicines (ordering from private companies, issuing makeshift prescriptions). The second involved clientelism, circumvention of regulations, and misappropriation of resources. Adverse effects have arisen due to both the failings of the health system and the practices of health workers. These include a focus on the commercial management of patients, the most 'costly' of whom sometimes find themselves being refused treatment, patients roaming in search of medicines and treatment, and a decline in quality of care. PMID:26558816
-
Zhang, Xiao; Li, Jie; He, Zhini; Duan, Huawei; Gao, Weimin; Wang, Haisheng; Yu, Shanfa; Chen, Wen; Zheng, Yuxin
2016-08-01
Recently, diesel engine exhaust (DEE) was reclassified as a known carcinogen to humans. DNA methylation alterations in DNA damage response (DDR)-related genes have the potential to affect DEE exposure-related cancer risk. However, the evidence regarding the association between DEE exposure and methylation alterations in DDR-related genes is limited. In 117 DEE-exposed workers and 112 non-DEE-exposed workers, we measured urinary concentrations of six mono-hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs). We also determined the methylation levels of three DDR-related genes (p16, RASSF1A, and MGMT) and LINE-1 by bisulfite-pyrosequencing assay. We found that DEE-exposed workers exhibited significantly lower mean promoter methylation levels of p16, RASSF1A, and MGMT than non-DEE-exposed workers (all p < 0.001). In all study subjects and non-smoking workers, increasing quartiles of urinary summed OH-PAHs was associated with hypomethylation of p16, RASSF1A, and MGMT (all p < 0.05). In non-smoking workers, methylation in p16, RASSF1A, and MGMT decreased by 0.36 % [95 % confidential interval (CI): -0.60, -0.11 %], 0.46 % (95 % CI: -0.79, -0.14 %), and 0.55 % (95 % CI: -0.95, -0.15 %), respectively, in association with highest versus lowest quartile of urinary summed OH-PAHs. In addition, p16, RASSF1A, MGMT, and LINE-1 methylation levels showed negative correlations with cytokinesis-block micronucleus cytome index which was previously measured in the same workers (all p < 0.05). In conclusion, our results clearly indicated that DEE exposure and increased genetic damage were associated with hypomethylation of p16, RASSF1A, and MGMT. Future studies with larger sample size are needed to confirm these associations.
-
Maternal Health Phone Line: Saving Women in Papua New Guinea
Watson, Amanda H.A.; Sabumei, Gaius; Mola, Glen; Iedema, Rick
2015-01-01
This paper presents the findings of a research project which has involved the establishment of a maternal health phone line in Milne Bay Province of Papua New Guinea (PNG). Mobile phones and landline phones are key information and communication technologies (ICTs). This research study uses the “ICTs for healthcare development” model to ascertain benefits and barriers to the successful implementation of the Childbirth Emergency Phone. PNG has a very high maternal mortality rate. The “three stages of delay” typology was developed by Thaddeus and Maine to determine factors that might delay provision of appropriate medical treatment and hence increase risk of maternal death. The “three stages of delay” typology has been utilised in various developing countries and also in the present study. Research undertaken has involved semi-structured interviews with health workers, both in rural settings and in the labour ward in Alotau. Additional data has been gathered through focus groups with health workers, analysis of notes made during phone calls, interviews with women and community leaders, observations and field visits. One hundred percent of interviewees (n = 42) said the project helped to solve communication barriers between rural health workers and Alotau Provincial Hospital. Specific examples in which the phone line has helped to create positive health outcomes will be outlined in the paper, drawn from research interviews. The Childbirth Emergency Phone project has shown itself to play a critical role in enabling healthcare workers to address life-threatening childbirth complications. The project shows potential for rollout across PNG; potentially reducing maternal morbidity and maternal mortality rates by overcoming communication challenges. PMID:25923199
-
Maternal health phone line: saving women in papua new Guinea.
Watson, Amanda H A; Sabumei, Gaius; Mola, Glen; Iedema, Rick
2015-04-27
This paper presents the findings of a research project which has involved the establishment of a maternal health phone line in Milne Bay Province of Papua New Guinea (PNG). Mobile phones and landline phones are key information and communication technologies (ICTs). This research study uses the "ICTs for healthcare development" model to ascertain benefits and barriers to the successful implementation of the Childbirth Emergency Phone. PNG has a very high maternal mortality rate. The "three stages of delay" typology was developed by Thaddeus and Maine to determine factors that might delay provision of appropriate medical treatment and hence increase risk of maternal death. The "three stages of delay" typology has been utilised in various developing countries and also in the present study. Research undertaken has involved semi-structured interviews with health workers, both in rural settings and in the labour ward in Alotau. Additional data has been gathered through focus groups with health workers, analysis of notes made during phone calls, interviews with women and community leaders, observations and field visits. One hundred percent of interviewees (n = 42) said the project helped to solve communication barriers between rural health workers and Alotau Provincial Hospital. Specific examples in which the phone line has helped to create positive health outcomes will be outlined in the paper, drawn from research interviews. The Childbirth Emergency Phone project has shown itself to play a critical role in enabling healthcare workers to address life-threatening childbirth complications. The project shows potential for rollout across PNG; potentially reducing maternal morbidity and maternal mortality rates by overcoming communication challenges.
-
Mikulski, Marek A; Leonard, Stephanie A; Sanderson, Wayne T; Hartley, Patrick G; Sprince, Nancy L; Fuortes, Laurence J
2011-03-01
The nuclear weapons industry has long been known as a source of beryllium exposure. A total of 1,004 former workers from a nuclear weapons assembly site in the Midwest were screened for sensitization to beryllium (BeS). The screenings were part of the Department of Energy (DOE) Former Worker Program established in 1996. Twenty-three (2.3%) workers were found sensitized to beryllium and this prevalence was comparable to other DOE sites. Occasional, direct exposure to beryllium through machining and grinding of copper-beryllium (Cu-Be) 2% alloy tools was found to increase the risk of sensitization compared to background exposure (OR = 3.83; 95% CI: 1.04-14.03) with a statistically significant trend (P = 0.03) revealing that particular jobs are associated with sensitization. Exposure potential in this study was estimated based on job titles and not personal exposure information. These results confirm the need to screen workers using beryllium alloy tools in other industries and for consideration of altering work practices. Copyright © 2010 Wiley-Liss, Inc.
-
Endangering women's health for profit: health and safety in Mexico's maquiladoras.
Abell, H
1999-11-01
This article focuses on the situation of women in Mexico's maquiladoras (assembly plants). There are approximately 1 million Mexicans working in over 4000 maquiladoras in which violations of worker's human, labor, and health rights exist. The specific dangers of work in maquiladoras and the double burden of domestic and factory work that women already bear all contribute to a wide range of health hazards for women. These workplace hazards include toxic chemicals, unsafe equipment, poor workstation design, and excessive heat or cold, poor ventilation and lighting, harmful noise levels, and dangerously high production quotas. Since most maquiladoras illegally dump hazardous waste and spew contaminants into the surrounding environment, residents of maquiladora communities are exposed to additional health hazards simply because they live near the plants. In response to this problem, workers have organized themselves into community-based groups and democratic unions. The need for worker-controlled organizations was emphasized because workers who are organized have greater possibilities of addressing their concerns about health, safety, wages, and job security than those who are not.
-
Fire Extinguisher Designated Worker and Fire Watch: Self-Study Course 15672
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harris, Jimmy D.
At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code ofmore » Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.« less
-
Fire Extinguisher Training for Fire Watch and Designated Workers, Course 9893
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harris, Jimmy D.
At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code ofmore » Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.« less
-
Trends in rates of occupational fatal injuries in the United States (1983-92).
Bailer, A J; Stayner, L T; Stout, N A; Reed, L D; Gilbert, S J
1998-07-01
An updated version of a national surveillance system of traumatic occupational fatalities was used to explore adjusted and unadjusted trends in rates of fatal injury. Data from the national traumatic occupational fatalities surveillance system were combined with data on employment from the United States Bureau of Labor Statistics. Poisson regression was then used to examine trends in rates of occupational fatality injuries while controlling for demographic and workplace characteristics. Adjusted annual changes in rates of fatal injuries ranged from a decline of 6.2% for workers in technical and administrative support occupations--for example, health, science, and engineering technicians, pilots, computer programmers--to an increase of 1.6% in machine operators, assemblers, and inspectors. For industries, annual changes ranged from a decline of 5.3% for workers in public administration--for example, justice, public order, and safety workers--to an increase of 2.6% for workers in the wholesale trade. By comparison, the annual decline over all industries and occupations was 3.1%. In many industries and occupations, an effect modification of annual trends by the age of the worker was also found with the oldest workers experiencing either no decline or a significant increase in rates of fatal injuries. This general pattern of decline, adjusted for the effects of demographic characteristics of the worker population, is encouraging; however, increases in rates of fatal injuries found in particular industries and occupations, suggest appropriate targets for increased injury prevention efforts.
-
Trends in rates of occupational fatal injuries in the United States (1983-92)
Bailer, A. J.; Stayner, L. T.; Stout, N. A.; Reed, L. D.; Gilbert, S. J.
1998-01-01
OBJECTIVES: An updated version of a national surveillance system of traumatic occupational fatalities was used to explore adjusted and unadjusted trends in rates of fatal injury. METHODS: Data from the national traumatic occupational fatalities surveillance system were combined with data on employment from the United States Bureau of Labor Statistics. Poisson regression was then used to examine trends in rates of occupational fatality injuries while controlling for demographic and workplace characteristics. RESULTS: Adjusted annual changes in rates of fatal injuries ranged from a decline of 6.2% for workers in technical and administrative support occupations--for example, health, science, and engineering technicians, pilots, computer programmers--to an increase of 1.6% in machine operators, assemblers, and inspectors. For industries, annual changes ranged from a decline of 5.3% for workers in public administration--for example, justice, public order, and safety workers--to an increase of 2.6% for workers in the wholesale trade. By comparison, the annual decline over all industries and occupations was 3.1%. In many industries and occupations, an effect modification of annual trends by the age of the worker was also found with the oldest workers experiencing either no decline or a significant increase in rates of fatal injuries. CONCLUSIONS: This general pattern of decline, adjusted for the effects of demographic characteristics of the worker population, is encouraging; however, increases in rates of fatal injuries found in particular industries and occupations, suggest appropriate targets for increased injury prevention efforts. PMID:9816383
-
75 FR 6854 - Airworthiness Directives; Dassault-Aviation Model Falcon 900EX Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-12
... and passenger Right-Hand (RH) oxygen lines may both interfere with the frame 8 of the aeroplane structure. A subsequent design review of the oxygen lines routing has confirmed that, on certain aeroplanes, equipped in RH mid-cabin with a 115 cu-ft oxygen cylinder, the installation of the line support assembly at...
-
Electrical fatalities among U.S. construction workers.
Ore, T; Casini, V
1996-06-01
Over 2000 electrocution deaths were identified among U.S. construction workers from 1980 to 1991, with the highest mean annual crude mortality rate (2.5 per 100,000 people), and second highest mean age-adjusted rate (2.7 per 100,000 people) of all industries. Although the crude fatality rates showed a downward trend, construction workers are still about four times more likely to be electrocuted at work than are workers in all industries combined. Nearly 40% of the 5083 fatal electrocutions in all industries combined occurred in construction, and 80% were associated with industrial wiring, appliances, and transmission lines. Electrocutions ranked as the second leading cause of death among construction workers, accounting for an average of 15% of traumatic deaths in the industry from 1980 to 1991. The study indicates that the workers most at risk of electrical injury are male, young, nonwhite, and electricians, structural metal workers, and laborers. The most likely time of injury is 11 a.m. to 3 p.m. from June to August. Focusing prevention on these populations and characteristics through better methods of worker and supervisor electrical safety training, use of adequate protective clothing, and compliance with established procedures could minimize the average annual loss of 168 U.S. construction workers.
-
Park, Sungjin; Kyun Jung, Pil; Choi, Myungsup; Seok, Hongdeok; Kim, Hansol; Oh, Sung-Soo; Koh, Sang-Baek
2018-05-09
This study aimed to investigate the association between occupational clusters and allergic rhinitis (AR). The study was based on data from the Korean National Health and Nutrition Examination Survey (KNHANES: 2007-2015). This study included 46,965 individuals: 20,491 men and 26,474 women. AR was defined as having been diagnosed by a physician. Occupations were classified according to occupational characteristics and skill levels into white (chief executives, senior officials, legislators, managers, professionals, and technicians), pink (clerks, clerical support workers, services and sales workers), blue (craft and related trades workers, drivers, plant and machine operators, assemblers, elementary occupation workers), and green (skilled agricultural, forestry, and fishery workers) categories. We calculated the odds ratios (ORs) and 95% confidence intervals (CIs) of AR according to the occupational clusters by using the chi-squared test and logistic regression. In the study population, 10.7% of the men and 13.5% of the women had AR. The prevalence of AR was highest among white-collar workers, followed by pink, blue, and green-collar workers. Compared to green-collar workers, among men the adjusted ORs of the blue, pink, and white-collar workers were 2.00 (95% CI 1.58-2.53), 2.46 (95% CI 1.91-3.15), and 2.78 (95% CI 2.20-3.51), respectively; and among women were 2.45 (95% CI 1.99-3.02), 2.64 (95% CI 2.15-3.25), and 3.63 (95% CI 2.96-4.47), respectively. This study suggests that AR prevalence is significantly associated with occupational clusters.
-
Migrant workers: victims of war in Gulf.
1992-01-01
The Persian Gulf War forced millions of migrant workers in the region to return home, causing hardship not only on the workers but also on their home countries. Prior to the war, the region's oil wealth had attracted migrants from around the world. By 1990, some 3 million resided in Iraq and Kuwait alone. Many more worked in other Gulf countries. But only 2 months after the Iraqi invasion of Kuwait, over 2 million workers had fled the region or had been returned home. Yemenis and Egyptians alone accounted for 750,000 and 1/2 million workers, respectively. There were also an estimated 600,000 Asians. Although many of the migrants were unskilled laborers, many also were skilled laborers and professionals. Jordanians and Palestinians made up much of the Kuwaiti civil service. As the war unfolded, it became clear that the migrant workers lacked any of the legal rights and protection granted to other citizens. Many workers were not allowed to return home because of their importance to the economy. Others, like some 35,000 Sri Lankan housemaids in Kuwait, were stranded in the war zone, lacking the money and means to return home. In most cases, the workers also suffered from frozen bank accounts, unpaid wages and benefits, and property loss. Their return home also created problems for their countries. Jordan's population increased by 10% in 1990 due to the returning population. Yemen's unemployment increased from 10% to 25%. As a result of the Gulf war experience, the UN General Assembly adopted the International Convention on the Rights of Migrant Workers and their Families, which must now be ratified by 20 nations before implementation begins.
-
[Pathologic skin changes in workers at electric and thermoelectric power plants].
Kieć-Swierczyńska, M; Woźniak, H
1988-01-01
Dermatological examination was performed and epidermal tests using a routine set of allergens and metals (Cr, Co, Ni, Al, Cu, Ag, Zn, Hg, Fe) on 112 workers of power plants and thermal-electric power stations working at the stands characterized by a heavy dustiness (electro-filters operation, ash removal, deslagging, carburizing) and at the stands where dustiness was not so heavy but instead exposure to machine oils and greases (retors' operators, electromechanics, assemblers and welders) was remarkable. It was found that occupational exposure to chemicals resulted in skin inflammation in 7.1% of the examined persons. Machine oils and greases induced skin inflammation in 2.7% and occupational acne in 5.3% of workers. It was also observed that chromium compounds were the primary allergen in workers exposed to dusts (13.4% of sensitized persons) and in workers exposed to industrial greases and oils (8.0% of sensitized persons). Allergy to cobalt compounds prevailed among persons exposed to smears and oils. Single positive results of epidermal tests with the use of copper and silver were obtained. Moreover, data concerning the microelements content in fly-ashes are presented. Information on the frequency of the incidence of occupational skin diseases, sickness absenteeism due to dermatoses and on personal safety equipment which should be used by the workers of power industry plants are provided.
-
Point Relay Scanner Utilizing Ellipsoidal Mirrors
NASA Technical Reports Server (NTRS)
Manhart, Paul K. (Inventor); Pagano, Robert J. (Inventor)
1997-01-01
A scanning system uses a polygonal mirror assembly with each facet of the polygon having an ellipsoidal mirror located thereon. One focal point of each ellipsoidal mirror is located at a common point on the axis of rotation of the polygonal mirror assembly. As the mirror assembly rotates. a second focal point of the ellipsoidal mirrors traces out a scan line. The scanner can be utilized for scanned output display of information or for scanning information to be detected.
-
1977-04-25
H . Dudas and J . Paul Lyle, Jr. as project supervisors. The Frankford Arsenal Project Engineer...container was controlled to minimize dust emissions through any of the seals in the complete assembly. A gas bypass line allowed the displaced gas in...2) the cylinder, a shrink fit assembly of an H -12 steel liner and two outer retaining rings; and (3) a ram assembly consisting of a ram nose,